WorldWideScience

Sample records for source combustion symposium

  1. 8th International symposium on transport phenomena in combustion

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The 8th International Symposium on Transport Phenomena in Combustion will be held in San Francisco, California, U.S.A., July 16-20, 1995, under the auspices of the Pacific Center of Thermal-Fluids Engineering. The purpose of the Symposium is to provide a forum for researchers and practitioners from around the world to present new developments and discuss the state of the art and future directions and priorities in the areas of transport phenomena in combustion. The Symposium is the eighth in a series; previous venues were Honolulu 1985, Tokyo 1987, Taipei 1988, Sydney 1991, Beijing 1992, Seoul 1993 and Acapulco 1994, with emphasis on various aspects of transport phenomena. The current Symposium theme is combustion. The Symposium has assembled a balanced program with topics ranging from fundamental research to contemporary applications of combustion theory. Invited keynote lecturers will provide extensive reviews of topics of great interest in combustion. Colloquia will stress recent advances and innovations in fire spread and suppression, and in low NO{sub x} burners, furnaces, boilers, internal combustion engines, and other practical combustion systems. Finally, numerous papers will contribute to the fundamental understanding of complex processes in combustion. This document contains abstracts of papers to be presented at the Symposium.

  2. Twenty-fifth symposium (international) on combustion

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    Approximately two-thirds of the papers presented at this conference are contained in this volume. The other one-third appear in special issues of ''Combustion and Flame'', Vol. 99, 1994 and Vol. 100, 1995. Papers are divided into the following sections: Supersonic combustion; Detonations and explosions; Internal combustion engines; Practical aspects of combustion; Incineration and wastes; Sprays and droplet combustion; Coal and organic solids combustion; Soot and polycyclic aromatic hydrocarbons; Reaction kinetics; NO x ; Turbulent flames; Turbulent combustion; Laminar flames; Flame spread, fire and halogenated fire suppressants; Global environmental effects; Ignition; Two-phase combustion; Solid propellant combustion; Materials synthesis; Microgravity; and Experimental diagnostics. Papers have been processed separately for inclusion on the data base

  3. 7th international symposium on internal combustion diagnostics. Proceedings; 7. Internationales Symposium fuer Verbrennungsdiagnostik. Beitraege

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    At one time combustion pressure indicating was the ''trigger'' for this symposium, and today it still serves as the basis for continued investigation of combustion phenomena. It now finds application throughout the development process, as more sophisticated analysis of conventional signals is possible. Understanding of localized combustion phenomena is substantially simplified by means of optical diagnostic methods, the application of which has reached a certain level of standardization. The presentations will cover specific topics including fuel spray analysis, ignition events and information about gas mixtures. The comparison and combination of results from measurement and simulation shed light on the complex processes in the combustion chamber. What's more, the linkage of two complementary methods offers substantial cost savings through reductions in test hardware and shorter development times. Focused application of all of the available tools allows us better to understand combustion processes, recognize the influential parameters and derive control algorithms. The latter are subsequently to be found in engines that fulfill both regulatory requirements and customer expectations. So it is that the symposium captures the current state of the art in combustion diagnostics through a combination of indicating, optical diagnostics and simulation, and offers both the methodology expert and the engine developer the ideal platform for discussion of today's issues - and to form their own opinions on them. Anyone wanting to keep up to date in this continuously developing and ever more complex area of activity certainly can't afford to miss our symposium. (orig.)

  4. 7th international symposium on internal combustion diagnostics. Proceedings; 7. Internationales Symposium fuer Verbrennungsdiagnostik. Beitraege

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    At one time combustion pressure indicating was the ''trigger'' for this symposium, and today it still serves as the basis for continued investigation of combustion phenomena. It now finds application throughout the development process, as more sophisticated analysis of conventional signals is possible. Understanding of localized combustion phenomena is substantially simplified by means of optical diagnostic methods, the application of which has reached a certain level of standardization. The presentations will cover specific topics including fuel spray analysis, ignition events and information about gas mixtures. The comparison and combination of results from measurement and simulation shed light on the complex processes in the combustion chamber. What's more, the linkage of two complementary methods offers substantial cost savings through reductions in test hardware and shorter development times. Focused application of all of the available tools allows us better to understand combustion processes, recognize the influential parameters and derive control algorithms. The latter are subsequently to be found in engines that fulfill both regulatory requirements and customer expectations. So it is that the symposium captures the current state of the art in combustion diagnostics through a combination of indicating, optical diagnostics and simulation, and offers both the methodology expert and the engine developer the ideal platform for discussion of today's issues - and to form their own opinions on them. Anyone wanting to keep up to date in this continuously developing and ever more complex area of activity certainly can't afford to miss our symposium. (orig.)

  5. SYMPOSIUM ON TURBULENCE AND COMBUSTION - SPECIAL SYMPOSIUM TO BRING TOGETHER TOP RESEARCHERS IN THE FIELDS OF FLUID TURBULENCE AND COMBUSTION TO PROMOTE ADVANCES IN TURBULENT, REACTING FLOWS

    Energy Technology Data Exchange (ETDEWEB)

    Caughey, David

    2010-10-08

    A Symposium on Turbulence and Combustion was held at Cornell University on August 3-4, 2009. The overall goal of the Symposium was to promote future advances in the study of turbulence and combustion, through an unique forum intended to foster interactions between leading members of these two research communities. The Symposium program consisted of twelve invited lectures given by world-class experts in these fields, two poster sessions consisting of nearly 50 presentations, an open forum, and other informal activities designed to foster discussion. Topics covered in the lectures included turbulent dispersion, wall-bounded flows, mixing, finite-rate chemistry, and others, using experiment, modeling, and computations, and included perspectives from an international community of leading researchers from academia, national laboratories, and industry.

  6. 40 CFR 74.16 - Application requirements for combustion sources.

    Science.gov (United States)

    2010-07-01

    ... combustion sources. 74.16 Section 74.16 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... for combustion sources. (a) Opt-in permit application. Each complete opt-in permit application for a combustion source shall contain the following elements in a format prescribed by the Administrator: (1...

  7. Combustion

    CERN Document Server

    Glassman, Irvin

    1997-01-01

    This Third Edition of Glassman's classic text clearly defines the role of chemistry, physics, and fluid mechanics as applied to the complex topic of combustion. Glassman's insightful introductory text emphasizes underlying physical and chemical principles, and encompasses engine technology, fire safety, materials synthesis, detonation phenomena, hydrocarbon fuel oxidation mechanisms, and environmental considerations. Combustion has been rewritten to integrate the text, figures, and appendixes, detailing available combustion codes, making it not only an excellent introductory text but also an important reference source for professionals in the field. Key Features * Explains complex combustion phenomena with physical insight rather than extensive mathematics * Clarifies postulates in the text using extensive computational results in figures * Lists modern combustion programs indicating usage and availability * Relates combustion concepts to practical applications.

  8. Sources of Combustion Products: An Introduction to Indoor Air Quality

    Science.gov (United States)

    In addition to environmental tobacco smoke, other sources of combustion products are unvented kerosene and gas space heaters, woodstoves, fireplaces, and gas stoves. The major pollutants released are carbon monoxide, nitrogen dioxide, and particles.

  9. Reduction of NOx emission from stationary combustion sources

    International Nuclear Information System (INIS)

    Nelson, P.F.

    1992-01-01

    The environmental impacts of NO x emission from stationary combustion sources are briefly described. These include the formation of both acid rain and photochemical smog, major environmental problems. The three mechanisms which have been identified for the formation of NO x in combustion (thermal, prompt and fuel) are also briefly outlined. Recently stringent standards have been introduced to control emissions of NO x and the review describes the major primary and secondary measures. 10 refs. 2 tabs., 5 figs

  10. Indoor air quality environmental information handbook: Combustion sources

    Energy Technology Data Exchange (ETDEWEB)

    1990-06-01

    This environmental information handbook was prepared to assist both the non-technical reader (i.e., homeowner) and technical persons (such as researchers, policy analysts, and builders/designers) in understanding the current state of knowledge regarding combustion sources of indoor air pollution. Quantitative and descriptive data addressing the emissions, indoor concentrations, factors influencing indoor concentrations, and health effects of combustion-generated pollutants are provided. In addition, a review of the models, controls, and standards applicable to indoor air pollution from combustion sources is presented. The emphasis is on the residential environment. The data presented here have been compiled from government and privately-funded research results, conference proceedings, technical journals, and recent publications. It is intended to provide the technical reader with a comprehensive overview and reference source on the major indoor air quality aspects relating to indoor combustion activities, including tobacco smoking. In addition, techniques for determining potential concentrations of pollutants in residential settings are presented. This is an update of a 1985 study documenting the state of knowledge of combustion-generated pollutants in the indoor environment. 191 refs., 51 figs., 71 tabs.

  11. Human exposure to dioxin from combustion sources

    International Nuclear Information System (INIS)

    Hattemer-Frey, H.A.; Travis, C.C.

    1988-01-01

    Because of their extreme toxicity, much concern and debate has arisen about the nature and extent of human exposure to dioxin. Since municipal solid waste (MSW) incinerators are known to emit polychorinated dibenzo-p-dioxins (PCDDs) and polycholorinated dibenzofurnas (PCDFs) many people who live near MSW incinerators fear that they will be exposed to high levels of dioxin and subsequently develop cancer. What is often overlooked in this debate, however, is the fact that the general population is continuously being exposed to trace amounts of dioxin as exemplified by the fact that virtually all human adipose tissue samples contain dioxin at levels of 3 parts per trillion (ppt) or greater. This paper provides a perspective on MSW incineration as a source of human exposure to dioxin by comparing this exposure source with exposure to background environmental contamination and evaluates some of the potential key sources of PCDD/PCDF input into the enviroment. 32 refs., 3 tabs

  12. Microjet burners for molecular-beam sources and combustion studies

    Science.gov (United States)

    Groeger, Wolfgang; Fenn, John B.

    1988-09-01

    A novel microjet burner is described in which combustion is stabilized by a hot wall. The scale is so small that the entire burner flow can be passed through a nozzle only 0.2 mm or less in diameter into an evacuated chamber to form a supersonic free jet with expansion so rapid that all collisional processes in the jet gas are frozen in a microsecond or less. This burner can be used to provide high-temperature source gas for free jet expansion to produce intense beams of internally hot molecules. A more immediate use would seem to be in the analysis of combustion products and perhaps intermediates by various kinds of spectroscopies without some of the perturbation effects encountered in probe sampling of flames and other types of combustion devices. As an example of the latter application of this new tool, we present infrared emission spectra for jet gas obtained from the combustion of oxygen-hydrocarbon mixtures both fuel-rich and fuel-lean operation. In addition, we show results obtained by mass spectrometric analysis of the combustion products.

  13. Time-of-flight diffraction at pulsed neutron sources: An introduction to the symposium

    International Nuclear Information System (INIS)

    Jorgensen, J.D.

    1994-01-01

    In the 25 years since the first low-power demonstration experiments, pulsed neutron sources have become as productive as reactor sources for many types of diffraction experiments. The pulsed neutron sources presently operating in the United States, England, and Japan offer state of the art instruments for powder and single crystal diffraction, small angle scattering, and such specialized techniques as grazing-incidence neutron reflection, as well as quasielastic and inelastic scattering. In this symposium, speakers review the latest advances in diffraction instrumentation for pulsed neutron sources and give examples of some of the important science presently being done. In this introduction to the symposium, I briefly define the basic principles of pulsed neutron sources, review their development, comment in general terms on the development of time-of-flight diffraction instrumentation for these sources, and project how this field will develop in the next ten years

  14. Modeling Secondary Organic Aerosol Formation From Emissions of Combustion Sources

    Science.gov (United States)

    Jathar, Shantanu Hemant

    Atmospheric aerosols exert a large influence on the Earth's climate and cause adverse public health effects, reduced visibility and material degradation. Secondary organic aerosol (SOA), defined as the aerosol mass arising from the oxidation products of gas-phase organic species, accounts for a significant fraction of the submicron atmospheric aerosol mass. Yet, there are large uncertainties surrounding the sources, atmospheric evolution and properties of SOA. This thesis combines laboratory experiments, extensive data analysis and global modeling to investigate the contribution of semi-volatile and intermediate volatility organic compounds (SVOC and IVOC) from combustion sources to SOA formation. The goals are to quantify the contribution of these emissions to ambient PM and to evaluate and improve models to simulate its formation. To create a database for model development and evaluation, a series of smog chamber experiments were conducted on evaporated fuel, which served as surrogates for real-world combustion emissions. Diesel formed the most SOA followed by conventional jet fuel / jet fuel derived from natural gas, gasoline and jet fuel derived from coal. The variability in SOA formation from actual combustion emissions can be partially explained by the composition of the fuel. Several models were developed and tested along with existing models using SOA data from smog chamber experiments conducted using evaporated fuel (this work, gasoline, fischertropschs, jet fuel, diesels) and published data on dilute combustion emissions (aircraft, on- and off-road gasoline, on- and off-road diesel, wood burning, biomass burning). For all of the SOA data, existing models under-predicted SOA formation if SVOC/IVOC were not included. For the evaporated fuel experiments, when SVOC/IVOC were included predictions using the existing SOA model were brought to within a factor of two of measurements with minor adjustments to model parameterizations. Further, a volatility

  15. Characterization of carbonaceous aerosol emissions from selected combustion sources

    International Nuclear Information System (INIS)

    Martinez, J.P.G.; Espino, M.P.M.; Pabroa, P.C.B.; Bautista, A.T. VII

    2015-01-01

    Carbonaceous Particulates are carbon-containing solid or liquid matter which form a significant portion of the fine particulate mass (PM2.5) and these have known profound adverse effects on health, climate and visibility. This study aims to characterize carbonaceous aerosol emissions from different combustion sources to establish fingerprints for these for use in the refinement of improvement of the resolution of sources apportionment studies being done by the Philippine Nuclear Research Institute (PNRI), i.e. to resolve vehicular emission sources. Fine air particulate sample were collected in pre-baked Quartz filters using an improvised collection set-up with a Gent sampler. Concentrations of organic and elemental carbon (OC and EC, respectively) in PM2.5 were measured for the different combustion sources—vehicular emissions, tire pyrolysis, and biomass burning, using a thermal-optical method of analysis following the IMPROVE_A protocol. Measured OC ad EC concentrations are shown as percentages with respect to the total carbon (TC) and are illustrated in a 100% stacked chart. Predominance of the EC2 fraction is exhibited in both the diesel fuelled vehicle and tire pyrolysis emissions with EC2/OC2 ratio distinguishing one from the other, EC2/OC2 is 1.63 and 8.41, respectively. Predominance of either OC2 or OC3 fraction is shown in the unleaded gasoline and LPG Fuelled vehicles and in biomass burning with the OC2/OC3 ratio distinguishing one from the others. OC2/OC3 ratios are 1.33 for unleaded gasoline fuelled vehicle, 1.89 for LPG-fuelled vehicle, 0.55 for biomass burning (leaves) and 0.82 biomass burning (wood). The study has shown probable use of the EC2/OC2 and OC2/OC3 ratios to distinguish fingerprints for combustion sources covered in this study. (author)

  16. Do factors related to combustion-based sources explain ...

    Science.gov (United States)

    Introduction: Spatial heterogeneity of effect estimates in associations between PM2.5 and total non-accidental mortality (TNA) in the United States (US), is an issue in epidemiology. This study uses rate ratios generated from the Multi-City/Multi-Pollutant study (1999-2005) for 313 core-based statistical areas (CBSA) and their metropolitan divisions (MD) to examine combustion-based sources of heterogeneity.Methods: For CBSA/MDs, area-specific log rate ratios (betas) were derived from a model adjusting for time, an interaction with age-group, day of week, and natural splines of current temperature, current dew point, and unconstrained temperature at lags 1, 2, and 3. We assessed the heterogeneity in the betas by linear regression with inverse variance weights, using average NO2, SO2, and CO, which may act as a combustion source proxy, and these pollutants’ correlations with PM2.5. Results: We found that weighted mean PM2.5 association (0.96 percent increase in total non-accidental mortality for a 10 µg/m3 increment in PM2.5) increased by 0.26 (95% confidence interval 0.08 , 0.44) for an interquartile change (0.2) in the correlation of SO2 and PM2.5., but betas showed less dependence on the annual averages of SO2 or NO2. Spline analyses suggest departures from linearity, particularly in a model that examined correlations between PM2.5 and CO.Conclusions: We conclude that correlations between SO2 and PM2.5 as an indicator of combustion sources explains some hete

  17. Combustion

    CERN Document Server

    Glassman, Irvin

    1987-01-01

    Combustion, Second Edition focuses on the underlying principles of combustion and covers topics ranging from chemical thermodynamics and flame temperatures to chemical kinetics, detonation, ignition, and oxidation characteristics of fuels. Diffusion flames, flame phenomena in premixed combustible gases, and combustion of nonvolatile fuels are also discussed. This book consists of nine chapters and begins by introducing the reader to heats of reaction and formation, free energy and the equilibrium constants, and flame temperature calculations. The next chapter explores the rates of reactio

  18. The impact of municipal waste combustion in small heat sources

    Science.gov (United States)

    Vantúch, Martin; Kaduchová, Katarína; Lenhard, Richard

    2016-06-01

    At present there is a tendency to make greater use for heating houses for burning solid fuel, such as pieces of wood, coal, coke, local sources of heat to burn natural gas. This tendency is given both the high price of natural gas as well as the availability of cheaper solid fuel. In many cases, in the context saving heating costs, respectively in the context of the disposal of waste is co-incinerated with municipal solid fuels and wastes of different composition. This co entails increased production emissions such as CO (carbon monoxide), NOx (nitrogen oxides), particulate matter (particulate matter), PM10, HCl (hydrogen chloride), PCDD/F (polychlorinated dibenzodioxins and dibenzofurans), PCBs (polychlorinated biphenyls) and others. The experiment was focused on the emission factors from the combustion of fossil fuels in combination with municipal waste in conventional boilers designed to burn solid fuel.

  19. Combustion

    CERN Document Server

    Glassman, Irvin

    2008-01-01

    Combustion Engineering, a topic generally taught at the upper undergraduate and graduate level in most mechanical engineering programs, and many chemical engineering programs, is the study of rapid energy and mass transfer usually through the common physical phenomena of flame oxidation. It covers the physics and chemistry of this process and the engineering applications-from the generation of power such as the internal combustion automobile engine to the gas turbine engine. Renewed concerns about energy efficiency and fuel costs, along with continued concerns over toxic and particulate emissions have kept the interest in this vital area of engineering high and brought about new developments in both fundamental knowledge of flame and combustion physics as well as new technologies for flame and fuel control. *New chapter on new combustion concepts and technologies, including discussion on nanotechnology as related to combustion, as well as microgravity combustion, microcombustion, and catalytic combustion-all ...

  20. Emissions from laboratory combustion of wildland fuels: Emission factors and source profiles

    Science.gov (United States)

    L.-W. Anthony Chen; Hans Moosmuller; W. Patrick Arnott; Judith C. Chow; John G. Watson; Ronald A. Susott; Ronald E. Babbitt; Cyle E. Wold; Emily N. Lincoln; Wei Min Hao

    2007-01-01

    Combustion of wildland fuels represents a major source of particulate matter (PM) and light-absorbing elemental carbon (EC) on a national and global scale, but the emission factors and source profiles have not been well characterized with respect to different fuels and combustion phases. These uncertainties limit the accuracy of current emission inventories, smoke...

  1. IUTAM Symposium

    CERN Document Server

    Whitelaw, James; Wung, T

    1992-01-01

    A Symposium on Aerothermodynamics of Combustors was held at the Institute of Applied Mechanics of the National Taiwan University from 3 to 5 June 1991 and was attended by 130 delegates from eight countries. The topics of the forty formal presentations included measurements and calculations of isothermal simulations and of combusting flows with one and two phases, and with consideration of configurations ranging from simple diffusion to gas-turbine flows. The discussions inside and outside of the Symposium Hall were lively and an open forum session demonstrated the range of opinions currently and strongly held. The International Union of Theoretical and Applied Mechanics initiated the Symposium under the chairmanship of Professor R S L Lee and with the Scientific Committee listed below. It benefited from sponsorship, again as listed below, and from contributors who presented interesting and up-to-date descriptions of their research. Invited lectures were delivered by Professors R Bilger and F Weinberg and set ...

  2. 40 CFR 60.1025 - Do subpart E new source performance standards also apply to my municipal waste combustion unit?

    Science.gov (United States)

    2010-07-01

    ... standards also apply to my municipal waste combustion unit? 60.1025 Section 60.1025 Protection of... NEW STATIONARY SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which... municipal waste combustion unit? If this subpart AAAA applies to your municipal waste combustion unit, then...

  3. Combustion flame-plasma hybrid reactor systems, and chemical reactant sources

    Science.gov (United States)

    Kong, Peter C

    2013-11-26

    Combustion flame-plasma hybrid reactor systems, chemical reactant sources, and related methods are disclosed. In one embodiment, a combustion flame-plasma hybrid reactor system comprising a reaction chamber, a combustion torch positioned to direct a flame into the reaction chamber, and one or more reactant feed assemblies configured to electrically energize at least one electrically conductive solid reactant structure to form a plasma and feed each electrically conductive solid reactant structure into the plasma to form at least one product is disclosed. In an additional embodiment, a chemical reactant source for a combustion flame-plasma hybrid reactor comprising an elongated electrically conductive reactant structure consisting essentially of at least one chemical reactant is disclosed. In further embodiments, methods of forming a chemical reactant source and methods of chemically converting at least one reactant into at least one product are disclosed.

  4. Fuel wood symposium; Symposium Energieholz

    Energy Technology Data Exchange (ETDEWEB)

    Wild, C.; Wauer, A. (comps.)

    2001-07-01

    The Bavarian State Institute of Forestry (LWF) organised a 'Fuel Wood Symposium' in Freising-Weihenstephan on 17.11.2000. The purpose of this specialist conference was to give an overview of the use of biomass, especially wood, as an source of energy. (orig.) [German] Die Bayerische Landesanstalt fuer Wald und Forstwirtschaft richtete am 17.11.2000 in Freising-Weihenstephan das 'Symposium Energieholz' aus. Ziel der Fachtagung war es, einen Ueberblick ueber die energetische Nutzung von Biomasse, insbesondere Holz, zu geben. (orig.)

  5. 40 CFR 74.47 - Transfer of allowances from the replacement of thermal energy-combustion sources.

    Science.gov (United States)

    2010-07-01

    ... replacement of thermal energy-combustion sources. 74.47 Section 74.47 Protection of Environment ENVIRONMENTAL...—combustion sources. (a) Thermal energy plan—(1) General provisions. The designated representative of an opt... quarter the replacement unit(s) will replace thermal energy of the opt-in source; (ii) The name...

  6. Control of emissions from stationary combustion sources: Pollutant detection and behavior in the atmosphere

    International Nuclear Information System (INIS)

    Licht, W.; Engel, A.J.; Slater, S.M.

    1979-01-01

    Stationary combustion resources continue to be significant sources of NOx and SOx pollutants in the ambient atmosphere. This volume considers four problem areas: (1) control of emissions from stationary combustion sources, particularly SOx and NOx (2) pollutant behavior in the atmosphere (3) advances in air pollution analysis and (4) air quality management. Topics of interest include carbon slurries for sulfur dioxide abatement, mass transfer in the Kellogg-Weir air quality control system, oxidation/inhibition of sulfite ion in aqueous solution, some micrometeorological methods of measuring dry deposition rates, Spanish moss as an indicator of airborne metal contamination, and air quality impacts from future electric power generation in Texas

  7. 40 CFR 74.44 - Reduced utilization for combustion sources.

    Science.gov (United States)

    2010-07-01

    ... for consumption or in the residence or facility of a customer to whom the opt-in source's utility... production, the designated representative of the opt-in source must demonstrate to the satisfaction of the...: ER04AP95.014 where “actual heat input” and “reduction from improved efficiency” are defined as set forth in...

  8. Combustion-based power source for Venus surface missions

    Science.gov (United States)

    Miller, Timothy F.; Paul, Michael V.; Oleson, Steven R.

    2016-10-01

    The National Research Council has identified in situ exploration of Venus as an important mission for the coming decade of NASA's exploration of our solar system (Squyers, 2013 [1]). Heavy cloud cover makes the use of solar photovoltaics extremely problematic for power generation for Venus surface missions. In this paper, we propose a class of planetary exploration missions (for use on Venus and elsewhere) in solar-deprived situations where photovoltaics cannot be used, batteries do not provide sufficient specific energy and mission duration, and nuclear systems may be too costly or complex to justify or simply unavailable. Metal-fueled, combustion-based powerplants have been demonstrated for application in the terrestrial undersea environment. Modified or extended versions of the undersea-based systems may be appropriate for these sunless missions. We describe systems carrying lithium fuel and sulfur-hexafluoride oxidizer that have the potential for many days of operation in the sunless craters of the moon. On Venus a system level specific energy of 240 to 370 We-hr/kg should be possible if the oxidizer is brought from earth. By using either lithium or a magnesium-based alloy fuel, it may be possible to operate a similar system with CO2 derived directly from the Venus atmosphere, thus providing an estimated system specific energy of 1100 We+PV-hr/kg (the subscript refers to both electrical and mechanical power), thereby providing mission durations that enable useful scientific investigation. The results of an analysis performed by the NASA Glenn COMPASS team describe a mission operating at 2.3 kWe+PV for 5 days (120 h), with less than 260 kg power/energy system mass total. This lander would be of a size and cost suitable for a New Frontiers class of mission.

  9. Analysis of potential combustion source impacts on acid deposition using an independently derived inventory. Volume I

    Energy Technology Data Exchange (ETDEWEB)

    1983-12-01

    This project had three major objectives. The first objective was to develop a fossil fuel combustion source inventory (NO/sub x/, SO/sub x/, and hydrocarbon emissions) that would be relatively easy to use and update for analyzing the impact of combustion emissions on acid deposition in the eastern United States. The second objective of the project was to use the inventory data as a basis for selection of a number of areas that, by virtue of their importance in the acid rain issue, could be further studied to assess the impact of local and intraregional combustion sources. The third objective was to conduct an analysis of wet deposition monitoring data in the areas under study, along with pertinent physical characteristics, meteorological conditions, and emission patterns of these areas, to investigate probable relationships between local and intraregional combustion sources and the deposition of acidic material. The combustion source emissions inventory has been developed for the eastern United States. It characterizes all important area sources and point sources on a county-by-county basis. Its design provides flexibility and simplicity and makes it uniquely useful in overall analysis of emission patterns in the eastern United States. Three regions with basically different emission patterns have been identified and characterized. The statistical analysis of wet deposition monitoring data in conjunction with emission patterns, wind direction, and topography has produced consistent results for each study area and has demonstrated that the wet deposition in each area reflects the characteristics of the localized area around the monitoring sites (typically 50 to 150 miles). 8 references, 28 figures, 39 tables.

  10. Solubility of iron from combustion source particles in acidic media linked to iron speciation.

    Science.gov (United States)

    Fu, Hongbo; Lin, Jun; Shang, Guangfeng; Dong, Wenbo; Grassian, Vichi H; Carmichael, Gregory R; Li, Yan; Chen, Jianmin

    2012-10-16

    In this study, iron solubility from six combustion source particles was investigated in acidic media. For comparison, a Chinese loess (CL) dust was also included. The solubility experiments confirmed that iron solubility was highly variable and dependent on particle sources. Under dark and light conditions, the combustion source particles dissolved faster and to a greater extent relative to CL. Oil fly ash (FA) yielded the highest soluble iron as compared to the other samples. Total iron solubility fractions measured in the dark after 12 h ranged between 2.9 and 74.1% of the initial iron content for the combustion-derived particles (Oil FA > biomass burning particles (BP) > coal FA). Ferrous iron represented the dominant soluble form of Fe in the suspensions of straw BP and corn BP, while total dissolved Fe presented mainly as ferric iron in the cases of oil FA, coal FA, and CL. Mössbauer measurements and TEM analysis revealed that Fe in oil FA was commonly presented as nanosized Fe(3)O(4) aggregates and Fe/S-rich particles. Highly labile source of Fe in corn BP could be originated from amorphous Fe form mixed internally with K-rich particles. However, Fe in coal FA was dominated by the more insoluble forms of both Fe-bearing aluminosilicate glass and Fe oxides. The data presented herein showed that iron speciation varies by source and is an important factor controlling iron solubility from these anthropogenic emissions in acidic solutions, suggesting that the variability of iron solubility from combustion-derived particles is related to the inherent character and origin of the aerosols themselves. Such information can be useful in improving our understanding on iron solubility from combustion aerosols when they undergo acidic processing during atmospheric transport.

  11. Atmospheric processing of combustion aerosols as a source of soluble iron to the open ocean

    OpenAIRE

    伊藤, 彰記; ITO, Akinori

    2015-01-01

    The majority of bioavailable iron (Fe) from the atmosphere is delivered from arid and semiarid regions to the oceans because the global deposition of iron from combustion sources is small compared with that from mineral dust. Atmospheric processing of mineral aerosols by inorganic and organic acids from anthropogenic and natural sources has been shown to increase the iron solubility of soils (initially < 0.5%) up to about 10%. On the other hand, atmospheric observations have shown that iron i...

  12. Nitrogen Isotope Composition of Thermally Produced NOx from Various Fossil-Fuel Combustion Sources.

    Science.gov (United States)

    Walters, Wendell W; Tharp, Bruce D; Fang, Huan; Kozak, Brian J; Michalski, Greg

    2015-10-06

    The nitrogen stable isotope composition of NOx (δ(15)N-NOx) may be a useful indicator for NOx source partitioning, which would help constrain NOx source contributions in nitrogen deposition studies. However, there is large uncertainty in the δ(15)N-NOx values for anthropogenic sources other than on-road vehicles and coal-fired energy generating units. To this end, this study presents a broad analysis of δ(15)N-NOx from several fossil-fuel combustion sources that includes: airplanes, gasoline-powered vehicles not equipped with a three-way catalytic converter, lawn equipment, utility vehicles, urban buses, semitrucks, residential gas furnaces, and natural-gas-fired power plants. A relatively large range of δ(15)N-NOx values was measured from -28.1‰ to 8.5‰ for individual exhaust/flue samples that generally tended to be negative due to the kinetic isotope effect associated with thermal NOx production. A negative correlation between NOx concentrations and δ(15)N-NOx for fossil-fuel combustion sources equipped with selective catalytic reducers was observed, suggesting that the catalytic reduction of NOx increases δ(15)N-NOx values relative to the NOx produced through fossil-fuel combustion processes. Combining the δ(15)N-NOx measured in this study with previous published values, a δ(15)N-NOx regional and seasonal isoscape was constructed for the contiguous U.S., which demonstrates seasonal and regional importance of various NOx sources.

  13. Accounting Methodology for Source Energy of Non-Combustible Renewable Electricity Generation

    Energy Technology Data Exchange (ETDEWEB)

    Donohoo-Vallett, Paul [US Department of Energy, Washington, DC (United States)

    2016-10-01

    As non-combustible sources of renewable power (wind, solar, hydro, and geothermal) do not consume fuel, the “source” (or “primary”) energy from these sources cannot be accounted for in the same manner as it is for fossil fuel sources. The methodology chosen for these technologies is important as it affects the perception of the relative size of renewable source energy to fossil energy, affects estimates of source-based building energy use, and overall source energy based metrics such as energy productivity. This memo reviews the methodological choices, outlines implications of each choice, summarizes responses to a request for information on this topic, and presents guiding principles for the U.S. Department of Energy, (DOE) Office of Energy Efficiency and Renewable Energy (EERE) to use to determine where modifying the current renewable source energy accounting method used in EERE products and analyses would be appropriate to address the issues raised above.

  14. IUTAM Symposium

    CERN Document Server

    Stefanou, George

    2014-01-01

    This book contains the proceedings of the IUTAM Symposium on Multiscale Modeling and Uncertainty Quantification of Materials and Structures that was held at Santorini, Greece, September 9 – 11, 2013. It consists of 20 chapters which are divided in five thematic topics: Damage and fracture, homogenization, inverse problems–identification, multiscale stochastic mechanics and stochastic dynamics. Over the last few years, the intense research activity at microscale and nanoscale reflected the need to account for disparate levels of uncertainty from various sources and across scales. As even over-refined deterministic approaches are not able to account for this issue, an efficient blending of stochastic and multiscale methodologies is required to provide a rational framework for the analysis and design of materials and structures. The purpose of this IUTAM Symposium was to promote achievements in uncertainty quantification combined with multiscale modeling and to encourage research and development in this grow...

  15. Investigation of black and brown carbon multiple-wavelength-dependent light absorption from biomass and fossil fuel combustion source emissions

    Science.gov (United States)

    Michael R. Olson; Mercedes Victoria Garcia; Michael A. Robinson; Paul Van Rooy; Mark A. Dietenberger; Michael Bergin; James Jay Schauer

    2015-01-01

    Quantification of the black carbon (BC) and brown carbon (BrC) components of source emissions is critical to understanding the impact combustion aerosols have on atmospheric light absorption. Multiple-wavelength absorption was measured from fuels including wood, agricultural biomass, coals, plant matter, and petroleum distillates in controlled combustion settings....

  16. Morphology, composition, and mixing state of primary particles from combustion sources - crop residue, wood, and solid waste.

    Science.gov (United States)

    Liu, Lei; Kong, Shaofei; Zhang, Yinxiao; Wang, Yuanyuan; Xu, Liang; Yan, Qin; Lingaswamy, A P; Shi, Zongbo; Lv, Senlin; Niu, Hongya; Shao, Longyi; Hu, Min; Zhang, Daizhou; Chen, Jianmin; Zhang, Xiaoye; Li, Weijun

    2017-07-11

    Morphology, composition, and mixing state of individual particles emitted from crop residue, wood, and solid waste combustion in a residential stove were analyzed using transmission electron microscopy (TEM). Our study showed that particles from crop residue and apple wood combustion were mainly organic matter (OM) in smoldering phase, whereas soot-OM internally mixed with K in flaming phase. Wild grass combustion in flaming phase released some Cl-rich-OM/soot particles and cardboard combustion released OM and S-rich particles. Interestingly, particles from hardwood (pear wood and bamboo) and softwood (cypress and pine wood) combustion were mainly soot and OM in the flaming phase, respectively. The combustion of foam boxes, rubber tires, and plastic bottles/bags in the flaming phase released large amounts of soot internally mixed with a small amount of OM, whereas the combustion of printed circuit boards and copper-core cables emitted large amounts of OM with Br-rich inclusions. In addition, the printed circuit board combustion released toxic metals containing Pb, Zn, Sn, and Sb. The results are important to document properties of primary particles from combustion sources, which can be used to trace the sources of ambient particles and to know their potential impacts in human health and radiative forcing in the air.

  17. Highly controlled, reproducible measurements of aerosol emissions from combustion of a common African biofuel source

    Science.gov (United States)

    Haslett, Sophie L.; Thomas, J. Chris; Morgan, William T.; Hadden, Rory; Liu, Dantong; Allan, James D.; Williams, Paul I.; Keita, Sekou; Liousse, Cathy; Coe, Hugh

    2018-01-01

    Particulate emissions from biomass burning can both alter the atmosphere's radiative balance and cause significant harm to human health. However, due to the large effect on emissions caused by even small alterations to the way in which a fuel burns, it is difficult to study particulate production of biomass combustion mechanistically and in a repeatable manner. In order to address this gap, in this study, small wood samples sourced from Côte D'Ivoire in West Africa were burned in a highly controlled laboratory environment. The shape and mass of samples, available airflow and surrounding thermal environment were carefully regulated. Organic aerosol and refractory black carbon emissions were measured in real time using an Aerosol Mass Spectrometer and a Single Particle Soot Photometer, respectively. This methodology produced remarkably repeatable results, allowing aerosol emissions to be mapped directly onto different phases of combustion. Emissions from pyrolysis were visible as a distinct phase before flaming was established. After flaming combustion was initiated, a black-carbon-dominant flame was observed during which very little organic aerosol was produced, followed by a period that was dominated by organic-carbon-producing smouldering combustion, despite the presence of residual flaming. During pyrolysis and smouldering, the two phases producing organic aerosol, distinct mass spectral signatures that correspond to previously reported variations in biofuel emissions measured in the atmosphere are found. Organic aerosol emission factors averaged over an entire combustion event were found to be representative of the time spent in the pyrolysis and smouldering phases, rather than reflecting a coupling between emissions and the mass loss of the sample. Further exploration of aerosol yields from similarly carefully controlled fires and a careful comparison with data from macroscopic fires and real-world emissions will help to deliver greater constraints on the

  18. The ninth International Symposium on Electron Beam Ion Sources and Traps and Their Applications, 15-17 April 2004

    International Nuclear Information System (INIS)

    Nakamura, Nobuyuki; Ohtani, Shunsuke

    2004-01-01

    The ninth International Symposium on Electron Beam Ion Sources and Traps and Their Applications - EBIS/T 2004 was held at the Tokyo Metropolitan University (TMU), 15-17 April 2004. There were about 40 participants and about 30 papers presented. The meeting has shown the remarkable progress in science and technology with the EBIS/T machines. In this meeting, besides the normal presentations related to the EBIS/T works, a special session was organized on the last day which was dedicated to Professors N Kobayashi and K Okuno, who have contributed to the EBIS/T development and to the physics of highly charged ions (HCI), to mark their retirement from the TMU in March 2004. In the evening of the first day, there was a laboratory tour where the participants enjoyed seeing the Tokyo EBIT facility and also a beer party in a small hall next to the laboratory. The banquet was held in a traditional Japanese restaurant in a village under Mt Takao with the Japanese meals and performances, after seeing the HCI-research activities in the TMU. The next EBIS/T symposium will be held in Heidelberg in the summer of 2007 as a satellite meeting of XXV ICPEAC. We are looking forward to the next exciting meeting there. Finally, we thank all of TMU staffs and students for their help during the meeting. (preface)

  19. Effects of setting new source performance standards for fluidized-bed combustion systems

    Energy Technology Data Exchange (ETDEWEB)

    1978-02-01

    This study was undertaken for the US Environmental Protection Agency to examine the potential consequences of revisions in New Source Performance Standards (NSPS) on fluidized-bed combustor-based steam electric generators of greater than 250,000,000 Btu. A study of the appropriateness and differential effects of alternate regulatory approaches to the standards-setting process was made. Problems dealing with an emerging technology such as fluidized-bed combustion were emphasized. Finally, an examination was made of the potential benefits of fluidized-bed combustion (FBC) systems relative to conventional coal-fired systems equipped with scrubbers. Information is included on the relative advantages and disadvantages of utility-sized fluidized-bed combustors, the technical consequences of NSPS alternatives, policy implications concerning NSPS for steam-electric generators, and cost models for atmospheric and pressurized FBC systems. (LCL)

  20. Temporal evolution of ultrafine particles and of alveolar deposited surface area from main indoor combustion and non-combustion sources in a model room.

    Science.gov (United States)

    Manigrasso, Maurizio; Vitali, Matteo; Protano, Carmela; Avino, Pasquale

    2017-11-15

    Aerosol number size distributions, PM mass concentrations, alveolar deposited surface areas (ADSAs) and VOC concentrations were measured in a model room when aerosol was emitted by sources frequently encountered in indoor environments. Both combustion and non-combustion sources were considered. The most intense aerosol emission occurred when combustion sources were active (as high as 4.1×10 7 particlescm -3 for two meat grilling sessions; the first with exhaust ventilation, the second without). An intense spike generation of nucleation particles occurred when appliances equipped with brush electric motors were operating (as high as 10 6 particlescm -3 on switching on an electric drill). Average UFP increments over the background value were highest for electric appliances (5-12%) and lowest for combustion sources (as low as -24% for tobacco cigarette smoke). In contrast, average increments in ADSA were highest for combustion sources (as high as 3.2×10 3 μm 2 cm -3 for meat grilling without exhaust ventilation) and lowest for electric appliances (20-90μm 2 cm -3 ). The health relevance of such particles is associated to their ability to penetrate cellular structures and elicit inflammatory effects mediated through oxidative stress in a way dependent on their surface area. The highest VOC concentrations were measured (PID probe) for cigarette smoke (8ppm) and spray air freshener (10ppm). The highest PM mass concentration (PM 1 ) was measured for citronella candle burning (as high as 7.6mgm -3 ). Copyright © 2017 Elsevier B.V. All rights reserved.

  1. 10th Symposium on Sources and Detection of Dark Matter and Dark Energy in the Universe

    CERN Document Server

    UCLA Dark Matter 2012

    2012-01-01

    These proceedings provide the latest results on dark matter and dark energy research. The UCLA Department of Physics and Astronomy hosted its tenth Dark Matter and Dark Energy conference in Marina del Rey and brought together all the leaders in the field. The symposium provided a scientific forum for the latest discussions in the field.  Topics covered at the symposium:  •Status of measurements of the equation of state of dark energy and new experiments •The search for missing energy events at the LHC and implications for dark matter search •Theoretical calculations on all forms of dark matter (SUSY, axions, sterile neutrinos, etc.) •Status of the indirect search for dark matter •Status of the direct search for dark matter in detectors around the world •The low-mass wimp search region •The next generation of very large dark matter detectors •New underground laboratories for dark matter search  

  2. Influence of test configuration on the combustion characteristics of polymers as ignition sources

    Science.gov (United States)

    Julien, Howard L.

    1993-01-01

    The experimental evaluation of polymers as ignition sources for metals was accomplished at the NASA White Sands Test Facility (WSTF) using a standard promoted combustion test. These tests involve the transient burning of materials in high-pressure oxygen environments. They have provided data from which design decisions can be made; data include video recordings of ignition and non-ignition for specific combinations of metals and polymers. Other tests provide the measured compositions of combustion products for polymers at select burn times and an empirical basis for estimating burn rates. With the current test configuration, the detailed analysis of test results requires modeling a three-dimensional, transient convection process involving fluid motion, thermal conduction and convection, the diffusion of chemical species, and the erosion of sample surface. At the high pressure extremes, it even requires the analysis of turbulent, transient convection where the physics of the problem are not well known and the computation requirements are not practical at this time. An alternative test configuration that can be analyzed with a relatively-simple convection model was developed during the summer period. The principal change constitutes replacing a large-diameter polymer disk at the end of the metal test rod with coaxial polymer cylinders that have a diameter nearer to that of the metal rod. The experimental objective is to assess the importance of test geometries on the promotion of metal ignition by testing with different lengths of the polymer and, with an extended effort, to analyze the surface combustion in the redesigned promoted combustion tests through analytical modeling of the process. The analysis shall use the results of cone-calorimeter tests of the polymer material to model primary chemical reactions and, with proper design of the promoted combustion test, modeling of the convection process could be conveniently limited to a quasi-steady boundary layer

  3. Polychlorinated naphthalenes (PCNs) in Chinese forest soil: Will combustion become a major source?

    International Nuclear Information System (INIS)

    Xu, Yue; Li, Jun; Zheng, Qian; Pan, Suhong; Luo, Chunling; Zhu, Haolin; Nizzetto, Luca; Zhang, Gan

    2015-01-01

    We collected O- and A-horizon soil samples in 26 Chinese mountainous forests to investigate the content, spatial pattern, and potential sources of polychlorinated naphthalenes (PCNs). Spatial patterns were influenced mainly by the approximation to sources and soil organic contents. High concentrations often occurred close to populated or industrialized areas. Combustion-related activities contributed to PCN pollution. Relatively high proportions of CN-73 in northern China may be attributed to coke consumption, while CN-51 could be an indicator of biomass burning in Southwest China. There are evidences that PCNs may largely derived from unintentional production. If uncontrolled, UP-PCN (unintentionally produced PCNs) emissions could increase with industrial development. The abnormally high concentrations at Gongga and Changbai Mountains appear to be associated with the high efficient of forest filter of atmospheric contaminants at these densely forested sites. We question whether this is caused by ecotones between forests, and raise additional questions for future analyses. - Highlights: • PCNs were measured in the O- and A-horizon soil of Chinese mountainous forests. • SOC and source emissions are mainly responsible for PCN pollution. • Thermal processes may contribute to PCN pollution on a regional scale. • CN-73 could be an indicator of coke consumption in northern China. - Combustion-related activities may contributed to a major part of PCN pollution in Chinese background soil

  4. Kasseler symposium on energy-related system engineering: renewable energy sources and rational energy use. Proceedings '98; Kasseler Symposium Energie-Systemtechnik: Erneuerbare Energien und Rationelle Energieverwendung. Tagungsband '98

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, R. [comp.

    1999-07-01

    The ISET ended the 10th anniversary year since its foundation in 1998 with already the third Kassel symposium on energy-related system engineering: renewable energy sources and rational energy use. Covering several special subjects talks were given about the topics modelling and simulation in the fields of wind energy, photovoltaic systems, hybrid systems or sewage water treatment. The keen interest of the participants shows the importance that modelling of conditions or processes has gained in the meantime in the field of system engineering of renewable energy sources. The core of each simulation is the integration of differential equations, which describe the system. Properties of the system can be easily varied and affects on the overall system can be easily investigated. Critical conditions can be discovered and be taken into consideration at the hardware engineering. Mistakes in terms of component design can be avoided and engineering cost can be reduced considerably. The present conference book gives an ideal overview of the topics discussed during the symposium. (orig.) [German] Sein Jubilaeumsjahr zum zehnjaehrigen Bestehen beschloss das ISET 1998 mit dem nun bereits 3. Kasseler Symposium Energie-Systemtechnik - Erneuerbare Energien und Rationelle Energieverwendung. Fachgebietsuebergreifend wurde zu den Themen Modellbildung und Simulation in Bereichen wie Windenergie, Photovoltaik, Hybridsysteme oder Abwasserbehandlung referiert. Das rege Interesse der Teilnehmer unterstreicht die Bedeutung, die die Modellierung von Zustaenden oder Prozessen in der Systementwicklung bei den erneuerbaren Energien inzwischen gewonnen hat. Der Kern einer jeden Simulation ist die Integration der systembeschreibenden Differentialgleichungen. Eigenschaften des Systems koennen in einfacher Weise variiert und die Auswirkungen auf das Gesamtsystem untersucht werden. Kritische Zustaende koennen entdeckt und in der Entwicklung der Hardware entsprechend beruecksichtigt werden. Fehler

  5. Megacity and country emissions from combustion sources-Buenos Aires-Argentina

    Science.gov (United States)

    Dawidowski, L.; Gomez, D.; Matranga, M.; D'Angiola, A.; Oreggioni, G.

    2010-12-01

    Historic time series (1970-2006) emissions of greenhouse gases and air pollutants arising from stationary and mobile combustion sources were estimated at national level for Argentina and at regional level for the metropolitan area of Buenos Aires (MABA). All emissions were estimated using a bottom-up approach following the IPCC good practice guidance. For mobile sources, national emissions include all transport categories. Regional emissions account thus far only for on-road. For national emissions, methodologies and guidance by the IPCC were employed, applying the highest possible tier and using: i)country-specific emission factors for carbon and sulphur and technology-based information for other species, ii)activity data from energy balance series (1970-2007), and iii)complementary information concerning the non-energy use of fuels. Regional emissions in 2006 were estimated in-depth using a technology-based approach for the city of Buenos Aires (CBA) and the 24 neighboring districts composing the MABA. A regional emissions factors database was developed to better characterize Latin American fleets and driving conditions employing COPERT III-IV algorithms and emission factors measured in dynamometers and circulating vehicles in Argentina, Brazil, Chile and Colombia. Past emissions were back estimated from 2005 to 1970 using the best available information, which differs greatly among categories, spatial disaggregation and time periods. The time series of stationary and mobile combustion sources at the national and regional level allowed the identification of distinct patterns. National greenhouse gas emissions in 2006 amounted to ~ 150 million ton CO2-equivalent, 70% of which were contributed by stationary sources. On-road transport was the major contributor within mobile sources (28.1 %). The increasing emissions trends are dominated by on-road transport, agriculture and residential categories while the variability is largely associated with energy industries

  6. Catalysts for cleaner combustion of coal, wood and briquettes sulfur dioxide reduction options for low emission sources

    Energy Technology Data Exchange (ETDEWEB)

    Smith, P.V. [Global Environmental Solutions, Inc., Morton Grove, IL (United States)

    1995-12-31

    Coal fired, low emission sources are a major factor in the air quality problems facing eastern European cities. These sources include: stoker-fired boilers which feed district heating systems and also meet local industrial steam demand, hand-fired boilers which provide heat for one building or a small group of buildings, and masonary tile stoves which heat individual rooms. Global Environmental Systems is marketing through Global Environmental Systems of Polane, Inc. catalysts to improve the combustion of coal, wood or fuel oils in these combustion systems. PCCL-II Combustion Catalysts promotes more complete combustion, reduces or eliminates slag formations, soot, corrosion and some air pollution emissions and is especially effective on high sulfur-high vanadium residual oils. Glo-Klen is a semi-dry powder continuous acting catalyst that is injected directly into the furnace of boilers by operating personnel. It is a multi-purpose catalyst that is a furnace combustion catalyst that saves fuel by increasing combustion efficiency, a cleaner of heat transfer surfaces that saves additional fuel by increasing the absorption of heat, a corrosion-inhibiting catalyst that reduces costly corrosion damage and an air pollution reducing catalyst that reduces air pollution type stack emissions. The reduction of sulfur dioxides from coal or oil-fired boilers of the hand fired stoker design and larger, can be controlled by the induction of the Glo-Klen combustion catalyst and either hydrated lime or pulverized limestone.

  7. 6. Kassel symposium on energy system engineering. On-site energy generation using renewable energy sources. Proceedings 2001; 6. Kasseler Symposium: Energie-Systemtechnik. Erneuerbare Energien und rationelle Energieverwendung. Innovative Energiewandler. Tagungsband 2001

    Energy Technology Data Exchange (ETDEWEB)

    Caselitz, P. (comp.)

    2001-07-01

    The sixth Kassel symposium on energy system engineering. On-site energy generation using renewable energy sources focuses on the subject of innovative energy converter. The status and the development of generally known technologies is not only supposed to be reported on but also some conversion methods, which are currently not too well known. The changed frame conditions in the field of energy economy cause some systems, which have already been developed, to appear in a new light. The first talk of this symposium does not really discuss a method of energy conversion compared to the other talks. It rather describes a scenario that focuses on silicium as future energy carrier. Further contributions report on new, innovative concepts for electrical partial systems of wind and water power plants with variable revolution. Modern design methods for water turbines are presented with the example of hydraulic turbo-engines. Three contributions present the current status of technology and perspectives in the field of photovoltaics, thermal photovoltaics as well as new developments in the field of solarthermal systems. Talks about micro gas turbines and fuel cells discuss the use of these systems in dual purpose power plants and in the field of energy supply for houses. Information about modern steam engines and the use of Stirling engines in the field of biomass utilization complete the subject range of this symposium. (orig.) [German] Das 6. Kasseler Symposium zur Nutzung erneuerbarer Energien und rationellen Energieverwendung widmet sich dem Thema Innovative Energiewandler. Dabei soll nicht nur ueber den Stand und die Entwicklung weithin bekannter Technologien berichtet werden. Vorgestellt werden auch einige Konversionsverfahren, deren Bekanntheitsgrad heute noch gering ist. Auch lassen die veraenderten Rahmenbedingungen in der Energiewirtschaft einige im Prinzip entwickelte Systeme moeglicherweise in einem neuen Licht erscheinen. Der erste Beitrag des Symposiums setzt

  8. Coal dust symposium

    Energy Technology Data Exchange (ETDEWEB)

    1981-03-01

    This paper gives a report of the paper presented at the symposium held in Hanover on 9 and 10 February 1981. The topics include: the behaviour of dust and coal dust on combustion and explosion; a report on the accidents which occurred at the Laegerdorf cement works' coal crushing and drying plant; current safety requirements at coal crushing and drying plant; and coal crushing and drying. Four papers are individually abstracted. (In German)

  9. Monitoring of diesel engine combustions based on the acoustic source characterisation of the exhaust system

    Science.gov (United States)

    Jiang, J.; Gu, F.; Gennish, R.; Moore, D. J.; Harris, G.; Ball, A. D.

    2008-08-01

    Acoustic methods are among the most useful techniques for monitoring the condition of machines. However, the influence of background noise is a major issue in implementing this method. This paper introduces an effective monitoring approach to diesel engine combustion based on acoustic one-port source theory and exhaust acoustic measurements. It has been found that the strength, in terms of pressure, of the engine acoustic source is able to provide a more accurate representation of the engine combustion because it is obtained by minimising the reflection effects in the exhaust system. A multi-load acoustic method was then developed to determine the pressure signal when a four-cylinder diesel engine was tested with faults in the fuel injector and exhaust valve. From the experimental results, it is shown that a two-load acoustic method is sufficient to permit the detection and diagnosis of abnormalities in the pressure signal, caused by the faults. This then provides a novel and yet reliable method to achieve condition monitoring of diesel engines even if they operate in high noise environments such as standby power stations and vessel chambers.

  10. Spatial and Temporal Variations of EC and OC Aerosol Combustion Sources in a Polluted Metropolitan Area

    Science.gov (United States)

    Mouteva, G.; Randerson, J. T.; Fahrni, S.; Santos, G.; Bush, S. E.; Ehleringer, J. R.; Czimczik, C. I.

    2015-12-01

    Anthropogenic emissions of carbonaceous aerosols are a major component of fine air particulate matter (PM2.5) in polluted metropolitan areas and in the global atmosphere. Elemental (EC) and organic carbon (OC) aerosols influence Earth's energy balance by means of direct and indirect pathways and EC has been suggested as a better indicator of public health impacts from combustion-related sources than PM mass. Quantifying the contribution of fossil fuel and biomass combustion to the EC and OC emissions and their temporal and spatial variations is critical for developing efficient legislative air pollution control measures and successful climate mitigation strategies. In this study, we used radiocarbon (14C) to separate and quantify fossil and biomass contributions to a time series of EC and OC collected at 3 locations in Salt Lake City (SLC). Aerosol samples were collected on quartz fiber filters and a modified OC/EC analyzer was used with the Swiss_4S protocol to isolate and trap the EC fraction. Together with the total carbon (TC) content of the samples, the EC was analyzed for its 14C content with accelerator mass spectrometry. The 14C of OC was derived as a mass balance difference between TC and EC. EC had an annual average fraction modern of 0.13±0.06 and did not vary significantly across seasons. OC had an annual average FM of 0.49±0.13, with the winter mean (0.43±0.11) lower than the summer mean (0.64±0.13) at the 5% significance level. While the 3 stations were chosen to represent a variety of environmental conditions within SLC, no major differences in this source partitioning were observed between stations. During winter, the major sources of air pollutants in SLC are motor vehicles and wood stove combustion and determining their relative contributions has been the subject of debate. Our results indicated that fossil fuels were the dominant source of carbonaceous aerosols during winter, contributing 87% or more of the total EC mass and 40-75% of the OC

  11. Global combustion sources of organic aerosols: model comparison with 84 AMS factor-analysis data sets

    Science.gov (United States)

    Tsimpidi, Alexandra P.; Karydis, Vlassis A.; Pandis, Spyros N.; Lelieveld, Jos

    2016-07-01

    Emissions of organic compounds from biomass, biofuel, and fossil fuel combustion strongly influence the global atmospheric aerosol load. Some of the organics are directly released as primary organic aerosol (POA). Most are emitted in the gas phase and undergo chemical transformations (i.e., oxidation by hydroxyl radical) and form secondary organic aerosol (SOA). In this work we use the global chemistry climate model ECHAM/MESSy Atmospheric Chemistry (EMAC) with a computationally efficient module for the description of organic aerosol (OA) composition and evolution in the atmosphere (ORACLE). The tropospheric burden of open biomass and anthropogenic (fossil and biofuel) combustion particles is estimated to be 0.59 and 0.63 Tg, respectively, accounting for about 30 and 32 % of the total tropospheric OA load. About 30 % of the open biomass burning and 10 % of the anthropogenic combustion aerosols originate from direct particle emissions, whereas the rest is formed in the atmosphere. A comprehensive data set of aerosol mass spectrometer (AMS) measurements along with factor-analysis results from 84 field campaigns across the Northern Hemisphere are used to evaluate the model results. Both the AMS observations and the model results suggest that over urban areas both POA (25-40 %) and SOA (60-75 %) contribute substantially to the overall OA mass, whereas further downwind and in rural areas the POA concentrations decrease substantially and SOA dominates (80-85 %). EMAC does a reasonable job in reproducing POA and SOA levels during most of the year. However, it tends to underpredict POA and SOA concentrations during winter indicating that the model misses wintertime sources of OA (e.g., residential biofuel use) and SOA formation pathways (e.g., multiphase oxidation).

  12. Low-reactive circulating fluidized bed combustion (CFBC) fly ashes as source material for geopolymer synthesis

    International Nuclear Information System (INIS)

    Xu Hui; Li Qin; Shen Lifeng; Zhang Mengqun; Zhai Jianping

    2010-01-01

    In this contribution, low-reactive circulating fluidized bed combustion (CFBC) fly ashes (CFAs) have firstly been utilized as a source material for geopolymer synthesis. An alkali fusion process was employed to promote the dissolution of Si and Al species from the CFAs, and thus to enhance the reactivity of the ashes. A high-reactive metakaolin (MK) was also used to consume the excess alkali needed for the fusion. Reactivities of the CFAs and MK were examined by a series of dissolution tests in sodium hydroxide solutions. Geopolymer samples were prepared by alkali activation of the source materials using a sodium silicate solution as the activator. The synthesized products were characterized by mechanical testing, scanning electron microscopy (SEM), X-ray diffractography (XRD), as well as Fourier transform infrared spectroscopy (FTIR). The results of this study indicate that, via enhancing the reactivity by alkali fusion and balancing the Na/Al ratio by additional aluminosilicate source, low-reactive CFAs could also be recycled as an alternative source material for geopolymer production.

  13. Combustion Performance and Exhaust Emission of DI Diesel Engine Using Various Sources of Waste Cooking Oil

    Science.gov (United States)

    Afiq, Mohd; Azuhairi, Mohd; Jazair, Wira

    2010-06-01

    In Malaysia, more than 200-tone of cooking oil are used by domestic users everyday. After frying process, about a quarter of these cooking oil was remained and drained into sewage system. This will pollutes waterways and affects the ecosystem. The use of waste cooking oil (WCO) for producing bio-diesel was considered in economical factor which current production cost of bio-diesel production is higher in Malaysia due to higher price of palm oil. Thus, the aim of this study is to investigate the most suitable source of WCO to become a main source of bio-diesel for bio-diesel production in this country. To perform this research, three type of WCO were obtained from house's kitchen, cafeteria and mamak's restaurant. In this study, prospect of these bio-diesel source was evaluated based on its combustion performance and exhaust emissions operated in diesel engine in the form of waste cooking oil methyl ester (WCOME) and have been compared with pure diesel fuel. A 0.6 liter, single-cylinder, air-cooled direct injection diesel engine was used to perform this experiment. Experiment was done at variable engine loads and constant engine speed. As the result, among three stated WCOMEs, the one collected from house's kitchen gives the best performance in term of brake specific fuel consumption (bsfc) and brake power (BP) with lowest soot emission.

  14. Modeling the biogeochemical impact of atmospheric phosphate deposition from desert dust and combustion sources to the Mediterranean Sea

    Science.gov (United States)

    Richon, Camille; Dutay, Jean-Claude; Dulac, François; Wang, Rong; Balkanski, Yves

    2018-04-01

    Daily modeled fields of phosphate deposition to the Mediterranean from natural dust, anthropogenic combustion and wildfires were used to assess the effect of this external nutrient on marine biogeochemistry. The ocean model used is a high-resolution (1/12°) regional coupled dynamical-biogeochemical model of the Mediterranean Sea (NEMO-MED12/PISCES). The input fields of phosphorus are for 2005, which are the only available daily resolved deposition fields from the global atmospheric chemical transport model LMDz-INCA. Traditionally, dust has been suggested to be the main atmospheric source of phosphorus, but the LMDz-INCA model suggests that combustion is dominant over natural dust as an atmospheric source of phosphate (PO4, the bioavailable form of phosphorus in seawater) for the Mediterranean Sea. According to the atmospheric transport model, phosphate deposition from combustion (Pcomb) brings on average 40.5×10-6 mol PO4 m-2 yr-1 over the entire Mediterranean Sea for the year 2005 and is the primary source over the northern part (e.g., 101×10-6 mol PO4 m-2 yr-1 from combustion deposited in 2005 over the north Adriatic against 12.4×10-6 from dust). Lithogenic dust brings 17.2×10-6 mol PO4 m-2 yr-1 on average over the Mediterranean Sea in 2005 and is the primary source of atmospheric phosphate to the southern Mediterranean Basin in our simulations (e.g., 31.8×10-6 mol PO4 m-2 yr-1 from dust deposited in 2005 on average over the south Ionian basin against 12.4×10-6 from combustion). The evaluation of monthly averaged deposition flux variability of Pdust and Pcomb for the 1997-2012 period indicates that these conclusions may hold true for different years. We examine separately the two atmospheric phosphate sources and their respective flux variability and evaluate their impacts on marine surface biogeochemistry (phosphate concentration, chlorophyll a, primary production). The impacts of the different phosphate deposition sources on the biogeochemistry of the

  15. RECOMMENDED OPERATING PROCEDURE NO. 56: COLLECTION OF GASEOUS GRAB SAMPLES FROM COMBUSTION SOURCES FOR NITROUS OXIDE MEASUREMENT

    Science.gov (United States)

    The document is a recommended operating procedure, prepare or use in research activities conducted by EPA's Air and Energy Engineering Research Laboratory (AEERL). The procedure applies to the collection of gaseous grab samples from fossil fuel combustion sources for subsequent a...

  16. DEVELOPMENT OF SAMPLING AND ANALYTICAL METHODS FOR THE MEASUREMENT OF NITROUS OXIDE FROM FOSSIL FUEL COMBUSTION SOURCES

    Science.gov (United States)

    The report documents the technical approach and results achieved while developing a grab sampling method and an automated, on-line gas chromatography method suitable to characterize nitrous oxide (N2O) emissions from fossil fuel combustion sources. The two methods developed have...

  17. 15th Kassel symposium energy systems technology. Renewable energy sources and E-mobility. Proceedings; 15. Kasseler Symposium Energie-Systemtechnik. Erneuerbare Energien und E-Mobilitaet. Tagungsband

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    Within the 15th Kassel symposium of power system engineering from 23th to 24th September, 2010, in Kassel (Federal Republic of Germany) the following lectures were held: (1) Transformation of energy systems and electromobility (Juergen Schmid); (2) Electromobility and renewable energies - scenarios and perspectives (Michael Weinhold); (3) Fraunhofer systems research electromobility (Ulrich Buller); (4) Renewable energies and electromobility - research promotion of the BMU (Alexander Folz); (5) Lithium ion batteries - a key component for electric vehicles (Klaus Brandt); (6) Virtual batteries and electromobility (Peter Caselitz); (7) Integration of electric vehicles into the grid - grid-to-vehicle (Zbigeniew Styczynski); (8) Intelligent grid interfaces for electric vehicles (Ulrich Reker); (9) Contactless grid connection of electric vehicles (Ulrich Reker); (10) Current converters for electric vehicles (Peter Zacharias); (11) Vehicle to grid communication interface (Joerg Heuer); (12) Business models electromobility (Anke Weidlich); (13) Hydrogen and electromobility - a future model? (Hubert Landinger).

  18. Mercury from combustion sources: a review of the chemical species emitted and their transport in the atmosphere

    International Nuclear Information System (INIS)

    Carpi, A.

    1997-01-01

    Different species of mercury have different physical/chemical properties and thus behave quite differentially in air pollution control equipment and in the atmosphere. In general, emission of mercury from coal combustion sources are approximately 20-50% elemental mercury (Hg 0 ) and 50-80% divalent mercury (Hg(II)), which may be predominantly HgCl 2 . Emissions of mercury from waste incinerators are approximately 10-20% Hg 0 and 75-85% Hg(II). The partitioning of mercury in flue gas between the elemental and divalent forms may be dependent on the concentration of particulate carbon, HCl and other pollutants in the stack emissions. The emission of mercury from combustion facilities depends on the species in the exhaust stream and the type of air pollution control equipment used at the source. Air pollution control equipment for mercury removal at combustion facilities includes activated carbon injection, sodium sulfide injection and wet lime/limestone flue gas desulfurization. White Hg(II) is water-soluble and may be removed form the atmosphere by wet and dry deposition close to the combustion sources, the combination of a high vapor pressure and low water-solubility facilitate the long-range transport of Hg 0 in the atmosphere. Background mercury in the atmosphere is predominantly Hg 0 . Elemental mercury is eventually removed from the atmosphere by dry deposition onto surfaces and by wet deposition after oxidation to water-soluble, divalent mercury. 62 refs., 2 figs., 1 tab

  19. 12. symposium for the use of regenerative energy sources and hydrogen technology. Proceedings

    International Nuclear Information System (INIS)

    Lehmann, J.

    2005-01-01

    Topics of the conference were: renewable energy sources, wind energy, wood fueled space and water heating systems, SOFC fuel cell, storage of wind energy in the form of hydrogen, geothermal energy, usage of waste heat in low-temperature Rankine cycle engines, emissions trading, energy policy, solar hydrogen economy. (uke)

  20. Sixth symposium on x- and gamma ray sources and applications. Abstracts

    International Nuclear Information System (INIS)

    1985-01-01

    Abstracts are provided for technical presentations in the areas of: gamma and x-ray sources, kinds of detectors, characterization of detectors and detector systems, models and data analysis, gamma spectroscopy, instrumentation, x-ray fluorescence, tomography, x-ray absorption, and pion induced x-ray emission

  1. Global-scale combustion sources of organic aerosols: sensitivity to formation and removal mechanisms

    Science.gov (United States)

    Tsimpidi, Alexandra P.; Karydis, Vlassis A.; Pandis, Spyros N.; Lelieveld, Jos

    2017-06-01

    Organic compounds from combustion sources such as biomass burning and fossil fuel use are major contributors to the global atmospheric load of aerosols. We analyzed the sensitivity of model-predicted global-scale organic aerosols (OA) to parameters that control primary emissions, photochemical aging, and the scavenging efficiency of organic vapors. We used a computationally efficient module for the description of OA composition and evolution in the atmosphere (ORACLE) of the global chemistry-climate model EMAC (ECHAM/MESSy Atmospheric Chemistry). A global dataset of aerosol mass spectrometer (AMS) measurements was used to evaluate simulated primary (POA) and secondary (SOA) OA concentrations. Model results are sensitive to the emission rates of intermediate-volatility organic compounds (IVOCs) and POA. Assuming enhanced reactivity of semi-volatile organic compounds (SVOCs) and IVOCs with OH substantially improved the model performance for SOA. The use of a hybrid approach for the parameterization of the aging of IVOCs had a small effect on predicted SOA levels. The model performance improved by assuming that freshly emitted organic compounds are relatively hydrophobic and become increasingly hygroscopic due to oxidation.

  2. Proceedings of the second symposium on ion sources and formation of iron beams

    International Nuclear Information System (INIS)

    1974-01-01

    The results are reported of a detailed study of the ion optical performance of the disk aperture extraction system with particular regard to establishing the differences between the performance of the simple aperture studied by Coupland et al. and that of an approximation to a design based on Pierce geometry. Measurements of beam perveance emittance and divergence from the two systems are presented. Some of the implications of this work are discussed with regard to high current multiaperture ion sources being developed for fusion research

  3. Chemical source characterization of residential wood combustion emissions in Denver, Colorado; Bakersfield, California; and Mammoth Lakes, California

    International Nuclear Information System (INIS)

    Houck, J.E.; Goulet, J.M.; Chow, J.C.; Watson, J.G.

    1989-01-01

    The chemical composition of residential wood combustion particulate emissions was determined for fireplaces and woodstoves. Burn rates, burn patterns, wood burning appliances, and cordwood types characteristic of Denver, Colorado; Bakersfield, California; and Mammoth Lakes, California, were used during sample collection. Samples were collected using a dilution/cooling system to ensure that condensible compounds were captured. Analyses for 44 chemical species were conducted. Source profiles for use in chemical mass balance (CMB) modeling were calculated from the analytical data. The principal chemical species comprising the profiles were organic compounds and elemental carbon. The minor chemical species were sulfur, chlorine, potassium, sodium, calcium, zinc, nitrate, and ammonium. Virtually all potassium was in a water-soluble form, and sulfur emissions between fireplaces and woodstoves were noted. Area-specific source profiles for fireplaces, woodstoves, and overall residential wood combustion are presented

  4. Cyclic combustion driven shocks in a sompressible vortex as a source of MHD power

    Energy Technology Data Exchange (ETDEWEB)

    Jenkins, J. M.; Swithenbank, J.

    1963-04-15

    Theory and experimental data are presented on the properties of cyclic, combustion-driven shocks in a compressible vortex. In this system, part of the chemical energy is converted directly into kinetic energy. Because the temperatures encountered in these combustions approach those obtained in detonations, it is suggested that the cycliccombustion system might be suitable for the production of magnetohydrodynamic power. The experimental data presented are based on observations of rocket motor characteristics. Effects of instabilities are discussed. (T.F.H.)

  5. The fifth Finnish national aerosol symposium

    International Nuclear Information System (INIS)

    Mikkanen, P.; Haemeri, K.; Kauppinen, E.

    1993-01-01

    The Fifth Finnish Aerosol Symposium was held June 1-3, 1993. Symposium is jointly organized by FAAR, Aerosol Technology Group of Technical Research Centre of Finland and Helsinki University, Department of Physics. Aerosols, the suspensions of solid and liquid particles and gases, are receiving increasing importance in many areas of science and technology. These include industrial hygiene, ambient and indoor air pollution, pollution control technologies, cloud physics, nuclear safety engineering, combustion science and engineering, clean manufacturing technologies and material processing. The importance of aerosol issues during the development of advanced fuel conversion and material processing technologies can be realized when looking at the numerous papers presented on these topics at the Symposium

  6. Global Partitioning of NOx Sources Using Satellite Observations: Relative Roles of Fossil Fuel Combustion, Biomass Burning and Soil Emissions

    Science.gov (United States)

    Jaegle, Lyatt; Steinberger, Linda; Martin, Randall V.; Chance, Kelly

    2005-01-01

    This document contains the following abstract for the paper "Global partitioning of NOx sources using satellite observations: Relative roles of fossil fuel combustion, biomass burning and soil emissions." Satellite observations have been used to provide important new information about emissions of nitrogen oxides. Nitrogen oxides (NOx) are significant in atmospheric chemistry, having a role in ozone air pollution, acid deposition and climate change. We know that human activities have led to a three- to six-fold increase in NOx emissions since pre-industrial times, and that there are three main surface sources of NOx: fuel combustion, large-scale fires, and microbial soil processes. How each of these sources contributes to the total NOx emissions is subject to some doubt, however. The problem is that current NOx emission inventories rely on bottom-up approaches, compiling large quantities of statistical information from diverse sources such as fuel and land use, agricultural data, and estimates of burned areas. This results in inherently large uncertainties. To overcome this, Lyatt Jaegle and colleagues from the University of Washington, USA, used new satellite observations from the Global Ozone Monitoring Experiment (GOME) instrument. As the spatial and seasonal distribution of each of the sources of NOx can be clearly mapped from space, the team could provide independent topdown constraints on the individual strengths of NOx sources, and thus help resolve discrepancies in existing inventories. Jaegle's analysis of the satellite observations, presented at the recent Faraday Discussion on "Atmospheric Chemistry", shows that fuel combustion dominates emissions at northern mid-latitudes, while fires are a significant source in the Tropics. Additionally, she discovered a larger than expected role for soil emissions, especially over agricultural regions with heavy fertilizer use. Additional information is included in the original extended abstract.

  7. India Symposium

    Indian Academy of Sciences (India)

    JNCASR

    Impact of Women's research in Science and Technology in the new millennium'. The. Symposium will showcase the work done by young Indian Women Scientists in different branches of Science and Engineering, at a wide spectrum of Research ...

  8. IUTAM Symposium

    CERN Document Server

    1995-01-01

    The International Union of Theoretical and Applied Mechanics (IUTAM) decided in 1992 to sponsor the fourth Symposium on Laminar-Turbulent Transition, Sendai/Japan, 1994. The objectives of the present Symposium were to deepen the fundamental knowledge of stability and laminar­ turbulent transition in three-dimensional and compressible flows and to contribute to recent developing technologies in the field. This Symposium followed the three previous IUTAM-Symposia (Stuttgart 1979, Novosibirsk 1984 and Toulouse 1989). The Scientific Committee selected two keynote lectures and 62 technical papers. The Symposium was held on the 5th to 9th of September, 1994, at the Sendai International Center in Sendai. The participants were 82 scientists from 10 countries. The keynote lectures have critically reviewed recent development of researches concerning the laminar-to-turbulent transition phenomena from the fundamental and the application aspects. Many papers presented were concerned about the detailed mechanism of the bo...

  9. A Symposium.

    Science.gov (United States)

    Rachal, John R.

    2003-01-01

    Uses the framework of a symposium to present an imagined discussion by historical figures about whether and how knowledge might be acquired. Discussants include Democritus, Protagoras, Heraclitus, Socrates, Jesus, Gorgias, Nietzsche, Buddha, and Kierkegaard. (Contains 40 endnotes.) (SK)

  10. The source apportionment of carbonaceous combustion products by micro-radiocarbon measurements for the integrated air cancer project (IACP)

    International Nuclear Information System (INIS)

    Klouda, G.A.; Currie, L.A.; Sheffield, A.E.; Wise, S.A.; Benner, B.A.; Stevens, R.K.; Merrill, R.G.

    1987-01-01

    Atmospheric particle samples were collected during the winter of 1984-1985 in Albuquerque, NM and Raleigh, NC by the EPA for the Integrated Air Cancer Project (IACP). Selected chemical fractions were analyzed for /sup 14/C to apportion mobile (motor vehicles) and stationary (residential wood combustion) sources. In addition, these results were used to validate the EPA Single Tracer Regression Model (STRM), also a technique for the source apportionment of aerosols. Preliminary /sup 14/C results for the Albuquerque residential site at night showed 79% Contemporary Carbon (CC) compared to 95% CC for Raleight at night for the total carbon; 88% and 94% of the total-C was organic, respectively. The Albuquerque traffic site during the day showed 1.4 to 3.9 times less CC compared to the daytime residential site for total-C. The elemental carbon fraction in all cases showed a lower percentage of contemporary carbon than the total carbon, which indicates that this chemical fraction may be an excellent tracer of mobile sources. These results are consistent with a daytime mobile source at the traffic site and a nighttime Residential Wood Combustion (RWC) source at the residential site. Also, the results from the EPA STRM technique for this study were in good agreement with those obtained by the /sup 14/C Direct Tracer (/sup 14/C-DT) technique for source apportionment of these aerosols

  11. Source profiles and contributions of biofuel combustion for PM2.5, PM10 and their compositions, in a city influenced by biofuel stoves.

    Science.gov (United States)

    Tian, Ying-Ze; Chen, Jia-Bao; Zhang, Lin-Lin; Du, Xin; Wei, Jin-Jin; Fan, Hui; Xu, Jiao; Wang, Hai-Ting; Guan, Liao; Shi, Guo-Liang; Feng, Yin-Chang

    2017-12-01

    Source and ambient samples were collected in a city in China that uses considerable biofuel, to assess influence of biofuel combustion and other sources on particulate matter (PM). Profiles and size distribution of biofuel combustion were investigated. Higher levels in source profiles, a significant increase in heavy-biomass ambient and stronger correlations of K + , Cl - , OC and EC suggest that they can be tracers of biofuel combustion. And char-EC/soot-EC (8.5 for PM 2.5 and 15.8 for PM 10 of source samples) can also be used to distinguish it. In source samples, water-soluble organic carbon (WSOC) were approximately 28.0%-68.8% (PM 2.5 ) and 27.2%-43.8% (PM 10 ) of OC. For size distribution, biofuel combustion mainly produces smaller particles. OC1, OC2, EC1 and EC2 abundances showed two peaks with one below 1 μm and one above 2 μm. An advanced three-way factory analysis model was applied to quantify source contributions to ambient PM 2.5 and PM 10 . Higher contributions of coal combustion, vehicular emission, nitrate and biofuel combustion occurred during the heavy-biomass period, and higher contributions of sulfate and crustal dust were observed during the light-biomass period. Mass and percentage contributions of biofuel combustion were significantly higher in heavy-biomass period. The biofuel combustion attributed above 45% of K + and Cl - , above 30% of EC and about 20% of OC. In addition, through analysis of source profiles and contributions, they were consistently evident that biofuel combustion and crustal dust contributed more to cation than to anion, while sulfate & SOC and nitrate showed stronger influence on anion than on cation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Top-down estimate of a large source of atmospheric carbon monoxide associated with fuel combustion in Asia

    Energy Technology Data Exchange (ETDEWEB)

    Kasibhatla, P.; Arellano, A.; Logan, J.A.; Palmer, P.I.; Novelli, P. [Duke University, Durham, NC (United States). Nicholas School of Environmental & Earth Science

    2002-10-01

    Deriving robust regional estimates of the sources of chemically and radiatively important gases and aerosols to the atmosphere is challenging. Using an inverse modeling methodology, it was found that the source of carbon monoxide from fossil-fuel and biofuel combustion in Asia during 1994 was 350-380 Tg yr{sup -1}, which is 110-140 Tg yr{sup -1} higher than bottom-up estimates derived using traditional inventory-based approaches. This discrepancy points to an important gap in our understanding of the human impact on atmospheric chemical composition.

  13. Highly controlled, reproducible measurements of aerosol emissions from combustion of a common African biofuel source

    Directory of Open Access Journals (Sweden)

    S. L. Haslett

    2018-01-01

    Full Text Available Particulate emissions from biomass burning can both alter the atmosphere's radiative balance and cause significant harm to human health. However, due to the large effect on emissions caused by even small alterations to the way in which a fuel burns, it is difficult to study particulate production of biomass combustion mechanistically and in a repeatable manner. In order to address this gap, in this study, small wood samples sourced from Côte D'Ivoire in West Africa were burned in a highly controlled laboratory environment. The shape and mass of samples, available airflow and surrounding thermal environment were carefully regulated. Organic aerosol and refractory black carbon emissions were measured in real time using an Aerosol Mass Spectrometer and a Single Particle Soot Photometer, respectively. This methodology produced remarkably repeatable results, allowing aerosol emissions to be mapped directly onto different phases of combustion. Emissions from pyrolysis were visible as a distinct phase before flaming was established. After flaming combustion was initiated, a black-carbon-dominant flame was observed during which very little organic aerosol was produced, followed by a period that was dominated by organic-carbon-producing smouldering combustion, despite the presence of residual flaming. During pyrolysis and smouldering, the two phases producing organic aerosol, distinct mass spectral signatures that correspond to previously reported variations in biofuel emissions measured in the atmosphere are found. Organic aerosol emission factors averaged over an entire combustion event were found to be representative of the time spent in the pyrolysis and smouldering phases, rather than reflecting a coupling between emissions and the mass loss of the sample. Further exploration of aerosol yields from similarly carefully controlled fires and a careful comparison with data from macroscopic fires and real-world emissions will help to deliver

  14. Emulsified fuels. Its use in stationary sources; Combustibles emulsionados. Su utilizacion en fuentes estacionarias

    Energy Technology Data Exchange (ETDEWEB)

    Campos Morales, Gilberto; Magdaleno Molina, Moises; Vargas Y, Victor M; Gavira D, A [Instituto Mexicano del Petroleo, Mexico, D. F. (Mexico)

    1993-12-31

    Basic aspects are set forth of the heavy hydrocarbon fuels, the principles, preparation and particularities of the combustion with emulsions, that currently represent one option, either by themselves or in combination with other technologies to utilize heavy hydrocarbons, obtaining advantages in the reduction of polluting emissions, particulate matter and NOx, which allow continuing operating the operation within the limits established by the technical ecological standards. [Espanol] Se exponen aspectos basicos de los combustibles de hidrocarburos pesados (HC), los principios, preparacion y particularidades de la combustion con emulsiones, que actualmente representan una alternativa por si solos o en combinacion con otras tecnologias para utilizar hidrocarburos pesados, obteniendose ventajas en la reduccion de emisiones de contaminantes de particulas y NOx, lo cual permite continuar operando dentro de los limites que establecen las normas tecnicas ecologicas.

  15. Emulsified fuels. Its use in stationary sources; Combustibles emulsionados. Su utilizacion en fuentes estacionarias

    Energy Technology Data Exchange (ETDEWEB)

    Campos Morales, Gilberto; Magdaleno Molina, Moises; Vargas Y, Victor M.; Gavira D, A. [Instituto Mexicano del Petroleo, Mexico, D. F. (Mexico)

    1992-12-31

    Basic aspects are set forth of the heavy hydrocarbon fuels, the principles, preparation and particularities of the combustion with emulsions, that currently represent one option, either by themselves or in combination with other technologies to utilize heavy hydrocarbons, obtaining advantages in the reduction of polluting emissions, particulate matter and NOx, which allow continuing operating the operation within the limits established by the technical ecological standards. [Espanol] Se exponen aspectos basicos de los combustibles de hidrocarburos pesados (HC), los principios, preparacion y particularidades de la combustion con emulsiones, que actualmente representan una alternativa por si solos o en combinacion con otras tecnologias para utilizar hidrocarburos pesados, obteniendose ventajas en la reduccion de emisiones de contaminantes de particulas y NOx, lo cual permite continuar operando dentro de los limites que establecen las normas tecnicas ecologicas.

  16. Analysis of potential combustion source impacts on acid deposition using an independently derived inventory. Volume II, appendices

    Energy Technology Data Exchange (ETDEWEB)

    1983-12-01

    This document contains 2 appendices. The first documents the methodologies used to calculate production, unit energy consumption, fuel type and emission estimates for 16 industries and 35 types of facilities utilizing direct-fired industrial combustion processes, located in 26 states (and the District of Columbia) east of the Mississippi River. As discussed in the text of this report, a U.S. total of 16 industries and 45 types of facilities utilizing direct-fired combustion processes were identified by an elimination type method that was developed based on evaluation of fuel use in industrial SIC codes 20-39 to identify pollutant sources contributing to acid rain. The final population included only plants that have direct-fired fuel consumption greater than or equal to 100 x 10/sup 9/ Btu/yr of equivalent energy consumption. The goal for this analysis was to provide at least a 1980 base year for the data. This was achieved for all of the industries and in fact, 1981 data were used for a number of the industries evaluated. The second contains an analysis of all consumption of major fossil fuels to: (1) identify all fuel usage categories, and (2) identify the kinds of combustion equipment used within each category. This analysis provides a frame of reference for the balance of the study and permits using an energy accounting methodology to quantify the degree to which the inventoried sources in individual consuming sectors are complete and representative of the total population for the sector.

  17. Determination of combustible volatile matter in coal mine roadway dusts by backscatter of x-rays from a radioisotope source

    International Nuclear Information System (INIS)

    Ailwood, C.R.; Bunch, K.; Fookes, R.A.; Gravitis, V.L.; Watt, J.S.

    1977-01-01

    The combustible volatile matter in coal mine roadway dusts (CVM) has been determined using x-ray backscatter techniques. The correlation between x-ray and chemical techniques is reasonably good for the 92 samples from collieries on the Bulli seam, and the maximum error expected at the maximum level of 11.5 weight per cent CVM permitted in the N.S.W. Coal Mines Regulation Act, 1912, as amended, is about +- 2.5 weight per cent. This x-ray technique can be used only when the combustible volatile content of the coal matter (CVM) varies within a limited range, and a separate calibration is required for each coal seam. Portable equipment based on a radioisotope x-ray source and digital ratemeter makes possible simple and rapid analysis, and with adaptation to use in coal mines should lead to much more comprehensive testing of roadways and hence improved overall prevention of coal dust explosions. (author)

  18. Sourcing methane and carbon dioxide emissions from a small city: Influence of natural gas leakage and combustion.

    Science.gov (United States)

    Chamberlain, Samuel D; Ingraffea, Anthony R; Sparks, Jed P

    2016-11-01

    Natural gas leakage and combustion are major sources of methane (CH 4 ) and carbon dioxide (CO 2 ), respectively; however, our understanding of emissions from cities is limited. We mapped distribution pipeline leakage using a mobile CH 4 detection system, and continuously monitored atmospheric CO 2 and CH 4 concentrations and carbon isotopes (δ 13 C-CO 2 and δ 13 C-CH 4 ) for one-year above Ithaca, New York. Pipeline leakage rates were low (emission source in that wind sector. Our results demonstrate pipeline leakage rates are low in cities with a low extent of leak prone pipe, and natural gas power facilities may be an important source of urban and suburban emissions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Coal slurry combustion and technology. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    Volume II contains papers presented at the following sessions of the Coal Slurry Combustion and Technology Symposium: (1) bench-scale testing; (2) pilot testing; (3) combustion; and (4) rheology and characterization. Thirty-three papers have been processed for inclusion in the Energy Data Base. (ATT)

  20. Coal economics and taxation discussed at symposium

    Energy Technology Data Exchange (ETDEWEB)

    1978-06-01

    Some of the highlights from the Symposium on Coal Economics and Taxation Symposium, Regina Saskatchewan May 7-9, 1978, sponsored by the Coal Association of Canada are presented. Investment, provincial policy, sources of funds, uncertainty, tax policies, and operating costs are discussed.

  1. 7. Kassel symposium on energy systems technology: Renewable energy sources and efficient utilization of energy; 7. Kasseler Symposium Energie-Systemtechnik: Erneuerbare Energien und rationelle Energieverwendung

    Energy Technology Data Exchange (ETDEWEB)

    Caselitz, P. (comp.)

    2002-07-01

    This proceedings volume comprises 17 papers on the following subjects: Methane hydrates, compounds of gas and water; Compressed air stroage gas turbine power plants / Scheduled application for load levelling between varying wind power production and power demand; Modern pumped storage power stations in the GW range - the PSW Goldisthal example; Lead batteries - new developments and future applications; Alkaline battery systems for hybrid electric road vehicles; Lighium systems and their applications; Zinc/air cells; Hydrogen storage - metal hydride storage, compressed gas storage, LNG storage; Carbon nanofibres for hydrogen storage; Double-layer condensers - technology, cost, perslpectives; Supercondensers in motor vehicles; Superconducting magnetic energy stores; Flywheel storage - status report; Decentralized energy storage in the European integrated supply grid - the EU project DISPOWER; Intercontinental integration of power supply - perspectives of full-scale power supply on the basis of renewable energy sources in Europe; High-volgate direct-current transmission in the European power suppply grid; Superconductivity and energy transport - status and perspectives. [German] Dieser Tagungsband enthaelt 17 Vortraege mit folgenden Themen: Methanhydrate: Verbindung aus Gas und Wasser (Erwin Suess); Druckluftspeicher-Gasturbinen-Kraftwerke / Geplanter Einsatz beim Ausgleich flukturierender Windenergie-Produktion und aktuellem Strombedarf (Fritz Crotogino); Moderne Pumpspeicherwerke im Gigawattbereich - PSW Goldisthal (Wolfgang Bogenrieder); Bleibatterien - neue Entwicklungen und zukuenftige Einsatzbereiche (Reiner Wagner); Alkalische Batteriesysteme fuer Hybrid-Elektrostrassenfahrzeuge (Detlef Ohms, Gunter Schaedlich); Lithiumsysteme - Einsatzbereiche (Dietmar Rahner); Zink/Luft-Zellen (Michael Bruesewitz); Wasserstoffspeicher - Metallhydridspeicher, Druckgasspeicher, Fluessiggasspeicher (Andreas Otto); Kohlenstoff-Nanofasern zur Wasserstoffspeicherung (Juergen Garche

  2. Combustion physics

    Science.gov (United States)

    Jones, A. R.

    1985-11-01

    Over 90% of our energy comes from combustion. By the year 2000 the figure will still be 80%, even allowing for nuclear and alternative energy sources. There are many familiar examples of combustion use, both domestic and industrial. These range from the Bunsen burner to large flares, from small combustion chambers, such as those in car engines, to industrial furnaces for steel manufacture or the generation of megawatts of electricity. There are also fires and explosions. The bountiful energy release from combustion, however, brings its problems, prominent among which are diminishing fuel resources and pollution. Combustion science is directed towards finding ways of improving efficiency and reducing pollution. One may ask, since combustion is a chemical reaction, why physics is involved: the answer is in three parts. First, chemicals cannot react unless they come together. In most flames the fuel and air are initially separate. The chemical reaction in the gas phase is very fast compared with the rate of mixing. Thus, once the fuel and air are mixed the reaction can be considered to occur instantaneously and fluid mechanics limits the rate of burning. Secondly, thermodynamics and heat transfer determine the thermal properties of the combustion products. Heat transfer also plays a role by preheating the reactants and is essential to extracting useful work. Fluid mechanics is relevant if work is to be performed directly, as in a turbine. Finally, physical methods, including electric probes, acoustics, optics, spectroscopy and pyrometry, are used to examine flames. The article is concerned mainly with how physics is used to improve the efficiency of combustion.

  3. Symposium Highlights

    International Nuclear Information System (INIS)

    Owen-Whitred, K.

    2015-01-01

    Overview/Highlights: To begin, I'd like to take a moment to highlight some of the novel elements of this Symposium as compared to those that have been held in the past. For the first time ever, this Symposium was organized around five concurrent sessions, covering over 300 papers and presentations. These sessions were complemented by an active series of exhibits put on by vendors, universities, ESARDA, INMM, and Member State Support Programmes. We also had live demonstrations throughout the week on everything from software to destructive analysis to instrumentation, which provided the participants the opportunity to see recent developments that are ready for implementation. I'm sure you all had a chance to observe - and, more importantly, interact with - the electronic Poster, or ePoster format used this past week. This technology was used here for the first time ever by the IAEA, and I'm sure was a first for many of us as well. The ePoster format allowed participants to interact with the subject matter, and the subject matter experts, in a dynamic, engaging way. In addition to the novel technology used here, I have to say that having the posters strategically embedded in the sessions on the same topic, by having each poster author introduce his or her topic to the assembled group in order to lure us to the poster area during the breaks, was also a novel and highly effective technique. A final highlight I'd like to touch on in terms of the Symposium organization is the diversity of participation. This chart shows the breakdown by geographical distribution for the Symposium, in terms of participants. There are no labels, so don't try to read any, I simply wanted to demonstrate that we had great representation in terms of both the Symposium participants in general and the session chairs more specifically-and on that note, I would just mention here that 59 Member States participated in the Symposium. But what I find especially interesting and

  4. Spin symposium

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1989-01-15

    The recent 8th International Symposium on High Energy Spin Physics at the University of Minnesota in Minneapolis, Minnesota, opened with a bang when L. Pondrom (Wisconsin), donning a hard hat borrowed from construction workers, ventured that 'spin, the notorious inessential complication of hadronic physics, is finally telling us what real QCD (quantum chromodynamics, the field theory of quarks and gluons) looks like.' He was referring to an animated discussion on the meaning of the recent spin oriented (polarized) scattering results from the European Muon Collaboration (EMC) at CERN and reported at the Symposium by R. Garnet (Liverpool) and P. Schuler (Yale) which show that the proton spin is not simply a reflection of the spins of its constituent quarks.

  5. IUTAM Symposium

    CERN Document Server

    Shioiri, Jumpei

    1996-01-01

    The IUTAM Symposium on Constitutive Relation in High/Very High Strain Rates (CRHVHSR) was held October 16 - 19, 1995, at Seminar House, Science University of Tokyo, under the sponsorship of IUTAM, Japan Society for the Promotion of Science, The Commemorative Association for the Japan World Exposition (1970), Inoue Foundation for Science, The Japan Society for Aeronautical and Space Sciences, and Science University of Tokyo. The proposal to hold the symposium was accepted by the General Assembly of IUT AM held in Haifa, Israel, in August 1992, and the scientists mentioned below were appointed by the Bureau of IUTAM to serve as members of the Scientific Committee. The main object of the symposium was to make a general survey of recent developments in the research of constitutive relations in high and very high strain rates and related problems in high velocity solid mechanics, and to explore further new ideas for dealing with unresolved problems of a fundamental nature as well as of practical importance. The su...

  6. 5. Kassel symposium on energy systems engineering: On-site energy generation using renewable energy sources. Proceedings 2000; 5. Kasseler Symposium: Energie-Systemtechnik. Erneuerbare Energien- und rationelle Energieverwendung. Dezentrale Energieversorgung mit hohem regenerativen Anteil. Tagungsband 2000

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, R. (comp.)

    2000-07-01

    The focal topic of the 5th Kassel Symposium on Energy Systems Engineering was ''Decentralised energy supply with a high share of renewable energies''. The contributions covered a wide range of issues including the potential of renewable energies, supply and operating concepts, components, systems engineering and future perspectives. [German] Das 5. Kasseler Symposium Energie-Systemtechnik legt seinen Schwerpunkt auf das Thema: 'Dezentrale Energieversorgung mit hohem regenerativem Anteil'. Es spannt hierzu einen Bogen von den Potenzialen der Erneuerbaren Energien ueber Versorgungs- und Betriebsfuehrungskonzepte sowie Komponenten und Systemtechnik bis hin zu zukuenftigen Perspektiven. (orig.)

  7. 14th congress of combustion by-products and their health effects-origin, fate, and health effects of combustion-related air pollutants in the coming era of bio-based energy sources.

    Science.gov (United States)

    Weidemann, Eva; Andersson, Patrik L; Bidleman, Terry; Boman, Christoffer; Carlin, Danielle J; Collina, Elena; Cormier, Stephania A; Gouveia-Figueira, Sandra C; Gullett, Brian K; Johansson, Christer; Lucas, Donald; Lundin, Lisa; Lundstedt, Staffan; Marklund, Stellan; Nording, Malin L; Ortuño, Nuria; Sallam, Asmaa A; Schmidt, Florian M; Jansson, Stina

    2016-04-01

    The 14th International Congress on Combustion By-Products and Their Health Effects was held in Umeå, Sweden from June 14th to 17th, 2015. The Congress, mainly sponsored by the National Institute of Environmental Health Sciences Superfund Research Program and the Swedish Research Council for Environment, Agricultural Sciences and Spatial Planning, focused on the "Origin, fate and health effects of combustion-related air pollutants in the coming era of bio-based energy sources". The international delegates included academic and government researchers, engineers, scientists, policymakers and representatives of industrial partners. The Congress provided a unique forum for the discussion of scientific advances in this research area since it addressed in combination the health-related issues and the environmental implications of combustion by-products. The scientific outcomes of the Congress included the consensus opinions that: (a) there is a correlation between human exposure to particulate matter and increased cardiac and respiratory morbidity and mortality; (b) because currently available data does not support the assessment of differences in health outcomes between biomass smoke and other particulates in outdoor air, the potential human health and environmental impacts of emerging air-pollution sources must be addressed. Assessment will require the development of new approaches to characterize combustion emissions through advanced sampling and analytical methods. The Congress also concluded the need for better and more sustainable e-waste management and improved policies, usage and disposal methods for materials containing flame retardants.

  8. International symposium 'Energetics 2006'. Symposium proceedings

    International Nuclear Information System (INIS)

    2006-01-01

    ZEMAK as a civil association, created in the term positive legitimate regulations of our country, presents non party, non political and non profitable association, which primary goal is animation of eperts and other scientific and non scientific workers in the function of permanent following, studying and giving directives for solve the energy problems for a long temporal period. Behind us are fourteen successful years of fertile and wealthy work, which is bringing maimal penetration in domestic as well as foreign scientific field. This successful work of ZEMAK deserves by all members which professional work is in the institutions like: MANU (Macedonian academy of science and art), Technical faculties from the Universities, state and private company from energy field and other civil persons. The main goal of this 9-th International Symposium traditionally is to collect all engineers and eperts from the field of energy, and those which professional life is energy. During this International Symposium will be present, analyze and discuss about 100 incoming papers, prepared by 100th or more authors and coauthors, divided in the following topics: Basic energy and ecology, Renewable energy sources, Energy efficiency and energy saving and Management in energy and regulations.

  9. Emissions from Combustion of Open Area Sources: Prescribed Forest and Agricultural Burns

    Science.gov (United States)

    Emissions from wildfires and prescribed forest and agricultural burns generate a variety of emissions that can cause adverse health effects for humans, contribute to climate change, and decrease visibility. Only limited pollutant data are available for these sources, particularly...

  10. Symposium Summary

    Science.gov (United States)

    Levesque, Emily M.

    2017-11-01

    This proceeding summarizes the highlights of IAU 329, ``The Lives and Death-Throes of Massive Stars'', held in Auckland, NZ from 28 Nov - 2 Dec. I consider the progress that has been made in the field over the course of these ``beach symposia'', outline the overall content of the conference, and discuss how the current subfields in massive stellar astrophysics have evolved in recent years. I summarize some of the new results and innovative approaches that were presented during the symposium, and conclude with a discussion of how current and future resources in astronomy can serve as valuable tools for studying massive stars in the coming years.

  11. Recommended operating procedure number 56: Collection of gaseous grab samples from combustion sources for nitrous oxide measurement. Final report, Jan-Dec 91

    International Nuclear Information System (INIS)

    Ryan, J.V.; Karns, S.A.

    1992-07-01

    The document is a recommended operating procedure (ROP), prepared for use in research activities conducted by EPA's Air and Energy Engineering Research Laboratory (AEERL). The procedure applies to the collection of gaseous grab samples from fossil fuel combustion sources for subsequent analysis of nitrous oxide. The procedure details only the grab sampling methodology and associated equipment

  12. IUTAM Symposium

    CERN Document Server

    Pedley, Timothy

    2003-01-01

    The IUTAM Symposium on Flow in Collapsible Tubes and Past Other Highly Compliant Boundaries was held on 26-30 March, 2001, at the University of Warwick. As this was the first scientific meeting of its kind we considered it important to mark the occasion by producing a book. Accordingly, at the end of the Symposium the Scientific Committee met to discuss the most appropriate format for the book. We wished to avoid the format of the conventional conference book consisting of a large number of short articles of varying quality. It was agreed that instead we should produce a limited number of rigorously refereed and edited articles by selected participants who would aim to sum up the state of the art in their particular research area. The outcome is the present book. Peter W. Ca rpenter, Warwick Timothy J. Pedley, Cambridge May, 2002. VB SCIENTIFIC COMMITTEE Co-Chair: P.W. Carpenter, Engineering, Warwiek, UK Co-Chair: TJ. Pedley, DAMTP, Cambridge, UK V.V. Babenko, Hydromechanics, Kiev, Ukraine R. Bannasch, Bionik...

  13. Internal Combustion Engines as the Main Source of Ultrafine Particles in Residential Neighborhoods: Field Measurements in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Jitka Stolcpartova

    2015-11-01

    Full Text Available Ultrafine particles (UFP, diameter < 100 nm exposure has already been associated with adverse effects on human health. Spatial distribution of UFP is non-uniform; they concentrate in the vicinity of the source, e.g. traffic, because of their short lifespan. This work investigates spatial distribution of UFP in three areas in the Czech Republic with different traffic load: High traffic (Prague neighborhood—Sporilov, commuter road vicinity (Libeznice, and a small city with only local traffic (Celakovice. Size-resolved measurements of particles in the 5–500 nm range were taken with a particle classifier mounted, along with batteries, GPS and other accessories, on a handcart and pushed around the areas, making one-minute or longer stops at places of interest. Concentrations along main roads were elevated in comparison with places farther from the road; this pattern was observed in all sites, while particle number distributions both close and away from main roads had similar patterns. The absence of larger particles, the relative absence of higher concentrations of particles away from the main roads, and similar number distributions suggest that high particle number concentrations cannot be readily attributed to sources other than internal combustion engines in vehicles and mobile machinery (i.e., mowers and construction machines.

  14. On-line Field Measurements of Speciated PM1 Emission Factors from Common South Asian Combustion Sources

    Science.gov (United States)

    DeCarlo, P. F.; Goetz, J. D.; Giordano, M.; Stockwell, C.; Maharjan, R.; Adhikari, S.; Bhave, P.; Praveen, P. S.; Panday, A. K.; Jayarathne, T. S.; Stone, E. A.; Yokelson, R. J.

    2017-12-01

    Characterization of aerosol emissions from prevalent but under sampled combustion sources in South Asia was performed as part of the Nepal Ambient Monitoring and Source Testing Experiment (NAMaSTE) in April 2015. Targeted emission sources included cooking stoves with a variety of solid fuels, brick kilns, garbage burning, crop-residue burning, diesel irrigation pumps, and motorcycles. Real-time measurements of submicron non-refractory particulate mass concentration and composition were obtained using an Aerodyne mini Aerosol Mass Spectrometer (mAMS). Speciated PM1 mass emission factors were calculated for all particulate species (e.g. organics, sulfates, nitrates, chlorides, ammonium) and for each source type using the carbon mass balance approach. Size resolved emission factors were also acquired using a novel high duty cycle particle time-of-flight technique (ePTOF). Black carbon and brown carbon absorption emission factors and absorption Angström exponents were measured using filter loading and scattering corrected attenuation at 370 nm and 880 nm with a dual spot aethalometer (Magee Scientific AE-33). The results indicate that open garbage burning is a strong emitter of organic aerosol, black carbon, and internally mixed particle phase hydrogen chloride (HCl). Emissions of HCl were attributed to the presence chlorinated plastics. The primarily coal fired brick kilns were found to be large emitters of sulfate but large differences in the organic and light absorbing component of emissions were observed between the two kiln types investigated (technologically advanced vs. traditional). These results, among others, bring on-line and field-tested aerosol emission measurements to an area of atmoshperic research dominated by off-line or laboratory based measurements.

  15. Morphology, composition, and mixing state of primary particles from combustion sources ? crop residue, wood, and solid waste

    OpenAIRE

    Liu, Lei; Kong, Shaofei; Zhang, Yinxiao; Wang, Yuanyuan; Xu, Liang; Yan, Qin; Lingaswamy, A. P.; Shi, Zongbo; Lv, Senlin; Niu, Hongya; Shao, Longyi; Hu, Min; Zhang, Daizhou; Chen, Jianmin; Zhang, Xiaoye

    2017-01-01

    Morphology, composition, and mixing state of individual particles emitted from crop residue, wood, and solid waste combustion in a residential stove were analyzed using transmission electron microscopy (TEM). Our study showed that particles from crop residue and apple wood combustion were mainly organic matter (OM) in smoldering phase, whereas soot-OM internally mixed with K in flaming phase. Wild grass combustion in flaming phase released some Cl-rich-OM/soot particles and cardboard combusti...

  16. Numerical research of heat and mass transfer at the ignition of system “fabric – combustible liquid – oxidant” by the local energy source

    Directory of Open Access Journals (Sweden)

    Glushkov Dmitrii O.

    2015-01-01

    Full Text Available A numerical research was executed for macroscopic regularities determination of heat and mass transfer processes under the conditions of phase transformation and chemical reaction at the ignition of vapour coming from fabrics impregnated by typical combustible liquid into oxidant area at the local power supply. Limit conditions of heterogeneous system “fabric – combustible liquid – oxidant” ignition at the heating of single metal particle was established. Dependences of ignition delay time on temperature and rates of local power source were obtained.

  17. Combustion quality analysis of briquettes from variety of agricultural waste as source of alternative fuels

    Science.gov (United States)

    Suryaningsih, S.; Nurhilal, O.; Yuliah, Y.; Mulyana, C.

    2017-05-01

    The increasing in world population and the industrial sector led to increased demand for energy sources. To do this by utilizing the agricultural waste as a fuel source of alternative energy in the form of bio briquette. The aim at this study was to obtain data onto the characteristics of a wide variety of biomass briquettes from waste agricultural industry. The basic ingredients used are biomass waste from coconut husks, sawdust, rice husks and coffee husks. Each of these biomass residues are dried, crushed, then mixed with starch adhesives. This mixture is molded and dried using sunlight. Each type of briquettes was characterized and analyzed the physical-chemical properties, including calorific value, water content, fixed carbon content and the results were compared with charcoal and coal that was used as fuel in public. The results showed that bio briquettes from coconut husks get the highest calorific value of 4,451 cal/g.

  18. 28th International Symposium on Shock Waves

    CERN Document Server

    2012-01-01

    The University of Manchester hosted the 28th International Symposium on Shock Waves between 17 and 22 July 2011. The International Symposium on Shock Waves first took place in 1957 in Boston and has since become an internationally acclaimed series of meetings for the wider Shock Wave Community. The ISSW28 focused on the following areas: Blast Waves, Chemically Reacting Flows, Dense Gases and Rarefied Flows, Detonation and Combustion, Diagnostics, Facilities, Flow Visualisation, Hypersonic Flow, Ignition, Impact and Compaction, Multiphase Flow, Nozzle Flow, Numerical Methods, Propulsion, Richtmyer-Meshkov, Shockwave Boundary Layer Interaction, Shock Propagation and Reflection, Shock Vortex Interaction, Shockwave Phenomena and Applications, as well as Medical and Biological Applications. The two Volumes contain the papers presented at the symposium and serve as a reference for the participants of the ISSW 28 and individuals interested in these fields.

  19. Semivolatile POA and parameterized total combustion SOA in CMAQv5.2: impacts on source strength and partitioning

    Directory of Open Access Journals (Sweden)

    B. N. Murphy

    2017-09-01

    Full Text Available Mounting evidence from field and laboratory observations coupled with atmospheric model analyses shows that primary combustion emissions of organic compounds dynamically partition between the vapor and particulate phases, especially as near-source emissions dilute and cool to ambient conditions. The most recent version of the Community Multiscale Air Quality model version 5.2 (CMAQv5.2 accounts for the semivolatile partitioning and gas-phase aging of these primary organic aerosol (POA compounds consistent with experimentally derived parameterizations. We also include a new surrogate species, potential secondary organic aerosol from combustion emissions (pcSOA, which provides a representation of the secondary organic aerosol (SOA from anthropogenic combustion sources that could be missing from current chemical transport model predictions. The reasons for this missing mass likely include the following: (1 unspeciated semivolatile and intermediate volatility organic compound (SVOC and IVOC, respectively emissions missing from current inventories, (2 multigenerational aging of organic vapor products from known SOA precursors (e.g., toluene, alkanes, (3 underestimation of SOA yields due to vapor wall losses in smog chamber experiments, and (4 reversible organic compounds–water interactions and/or aqueous-phase processing of known organic vapor emissions. CMAQ predicts the spatially averaged contribution of pcSOA to OA surface concentrations in the continental United States to be 38.6 and 23.6 % in the 2011 winter and summer, respectively. Whereas many past modeling studies focused on a particular measurement campaign, season, location, or model configuration, we endeavor to evaluate the model and important uncertain parameters with a comprehensive set of United States-based model runs using multiple horizontal scales (4 and 12 km, gas-phase chemical mechanisms, and seasons and years. The model with representation of semivolatile POA

  20. AIR EMISSIONS FROM SCRAP TIRE COMBUSTION

    Science.gov (United States)

    The report discusses air emissions from two types of scrap tire combustion: uncontrolled and controlled. Uncontrolled sources are open tire fires, which produce many unhealthful products of incomplete combustion and release them directly into the atmosphere. Controlled combustion...

  1. Definition of the form of coal spontaneous combustion source as the inverse problem of geoelectrics

    Directory of Open Access Journals (Sweden)

    Sirota Dmitry

    2017-01-01

    Full Text Available The paper reviews the method of determining the shape and size of the coal self-heating source on coal pit benches and in coal piles during mining of coal by the open method. The method is based on the regularity found in the 1970s of the previous century and related to the distribution of potential of the natural electrical field arising from the temperature in the vicinity of the center of self-heating. The problem is reduced to the solution of inverse ill-posed problem of mathematical physics. The study presents the developed algorithm of its solution and the results of numerical simulation.

  2. Proceedings of the second US Department of Energy environmental control symposium. Volume 1. Fossil energy

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-06-01

    These proceedings document the presentations given at the Second Environmental Control Symposium. Symposium presentations highlighted environmental control activities which span the entire DOE. Volume I contains papers relating to coal preparation, oil shales, coal combustion, advanced coal utilization (fluidized bed combustion, MHD generators, OCGT, fuel cells), coal gasification, coal liquefaction, and fossil resource extraction (enhanced recovery). Separate abstracts for individual papers are prepared for inclusion in the Energy Data Base. (DMC)

  3. Sources of heavy metal contamination in Swedish wood waste used for combustion

    International Nuclear Information System (INIS)

    Krook, J.; Martensson, A.; Eklund, M.

    2006-01-01

    In this paper, wood waste (RWW) recovered for heat production in Sweden was studied. Previous research has concluded that RWW contains elevated amounts of heavy metals, causing environmental problems during waste management. This study extends previous work on RWW by analysing which pollution sources cause this contamination. Using existing data on the metal contents in various materials, and the amounts of these materials in RWW, the share of the elevated amounts of metals in RWW that these materials explain was quantified. Six different materials occurring in RWW were studied and the results show that they explain from 70% to 100% of the amounts of arsenic, chromium, lead, copper and zinc in RWW. The most important materials contributing to contamination of RWW are surface-treated wood, industrial preservative-treated wood, plastic and galvanised fastening systems. These findings enable the development and evaluation of strategies aiming to decrease pollution and resource loss from handling RWW. It is argued that source separation and measures taken further downstream from the generation site, such as treatment, need to be combined to substantially decrease the amount of heavy metals in RWW

  4. IUTAM Symposium

    CERN Document Server

    Bui, Huy

    1993-01-01

    Inverse problems occur in a wide variey of fields. In general, the inverse problem can be defined as one where one should estimate the cause from the result, while the direct problem is concerned with how to obtain the result from the cause. The aim of this symposium was to gather scientists and researchers in engineering mechanics concerned with inverse problems in order to exchange research result and develop computational and experimentalapproaches to solve inverse problems. The contributions in this volume cover the following subjects: mathematical and computational aspects of inverse problems, parameter or system identification, shape determination, sensitivity analysis, optimization, material property characterization, ultrasonic nondestructive testing, elastodynamic inverse problems, thermal inverse problems, and other miscellaneous engineering applications.

  5. SPPEXA Symposium

    CERN Document Server

    Neumann, Philipp; Nagel, Wolfgang

    2016-01-01

    The research and its outcomes presented in this collection focus on various aspects of high-performance computing (HPC) software and its development which is confronted with various challenges as today's supercomputer technology heads towards exascale computing. The individual chapters address one or more of the research directions (1) computational algorithms, (2) system software, (3) application software, (4) data management and exploration, (5) programming, and (6) software tools. The collection thereby highlights pioneering research findings as well as innovative concepts in exascale software development that have been conducted under the umbrella of the priority programme "Software for Exascale Computing" (SPPEXA) of the German Research Foundation (DFG) and that have been presented at the SPPEXA Symposium, Jan 25-27 2016, in Munich. The book has an interdisciplinary appeal: scholars from computational sub-fields in computer science, mathematics, physics, or engineering will find it of particular interest...

  6. Abstracts of papers to be presented at the fifth symposium on x- and gamma-ray sources and applications

    International Nuclear Information System (INIS)

    1981-01-01

    The program and abstracts of papers are presented. Topics include radiation sources, radiation detectors, mathematical models and data analysis, gamma-ray spectroscopy, instrumentation, applications of x-ray fluorescence, PIXE, and x-ray absorption

  7. Abstracts of papers to be presented at the fifth symposium on x- and gamma-ray sources and applications

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The program and abstracts of papers are presented. Topics include radiation sources, radiation detectors, mathematical models and data analysis, gamma-ray spectroscopy, instrumentation, applications of x-ray fluorescence, PIXE, and x-ray absorption. (ACR)

  8. Symposium on Nuclear Energy. Proceedings

    International Nuclear Information System (INIS)

    1981-01-01

    The energy problem poses a big challenge to a developing country like the Philippines. The development of renewable energy sources is not enough. Aware then of the limitations of these energy sources, in spite of arguments against nuclear energy we have no other recourse but to go nuclear. This symposium emphasizes the importance of energy development to attain the country's progress and discusses the pros and economics of nuclear power. (RTD)

  9. Seventh International Beaver Symposium

    OpenAIRE

    Yuri A. Gorshkov

    2016-01-01

    The paper presents data on the seventh international Beaver Symposium. Brief historical background about previous Beaver Symposia beaver is shown. Data on the sections of symposium, number of participants and reports are presented.

  10. Seventh International Beaver Symposium

    Directory of Open Access Journals (Sweden)

    Yuri A. Gorshkov

    2016-05-01

    Full Text Available The paper presents data on the seventh international Beaver Symposium. Brief historical background about previous Beaver Symposia beaver is shown. Data on the sections of symposium, number of participants and reports are presented.

  11. Toxicology of Biodiesel Combustion products

    Science.gov (United States)

    1. Introduction The toxicology of combusted biodiesel is an emerging field. Much of the current knowledge about biological responses and health effects stems from studies of exposures to other fuel sources (typically petroleum diesel, gasoline, and wood) incompletely combusted. ...

  12. Considering the future of anthropogenic gas-phase organic compound emissions and the increasing influence of non-combustion sources on urban air quality

    Science.gov (United States)

    Khare, Peeyush; Gentner, Drew R.

    2018-04-01

    Decades of policy in developed regions has successfully reduced total anthropogenic emissions of gas-phase organic compounds, especially volatile organic compounds (VOCs), with an intentional, sustained focus on motor vehicles and other combustion-related sources. We examine potential secondary organic aerosol (SOA) and ozone formation in our case study megacity (Los Angeles) and demonstrate that non-combustion-related sources now contribute a major fraction of SOA and ozone precursors. Thus, they warrant greater attention beyond indoor environments to resolve large uncertainties in their emissions, oxidation chemistry, and outdoor air quality impacts in cities worldwide. We constrain the magnitude and chemical composition of emissions via several bottom-up approaches using chemical analyses of products, emissions inventory assessments, theoretical calculations of emission timescales, and a survey of consumer product material safety datasheets. We demonstrate that the chemical composition of emissions from consumer products as well as commercial and industrial products, processes, and materials is diverse across and within source subcategories. This leads to wide ranges of SOA and ozone formation potentials that rival other prominent sources, such as motor vehicles. With emission timescales from minutes to years, emission rates and source profiles need to be included, updated, and/or validated in emissions inventories with expected regional and national variability. In particular, intermediate-volatility and semi-volatile organic compounds (IVOCs and SVOCs) are key precursors to SOA, but are excluded or poorly represented in emissions inventories and exempt from emissions targets. We present an expanded framework for classifying VOC, IVOC, and SVOC emissions from this diverse array of sources that emphasizes a life cycle approach over longer timescales and three emission pathways that extend beyond the short-term evaporation of VOCs: (1) solvent evaporation, (2

  13. Tubular combustion

    CERN Document Server

    Ishizuka, Satoru

    2014-01-01

    Tubular combustors are cylindrical tubes where flame ignition and propagation occur in a spatially confined, highly controlled environment, in a nearly flat, elongated geometry. This allows for some unique advantages where extremely even heat dispersion is required over a large surface while still maintaining fuel efficiency. Tubular combustors also allow for easy flexibility in type of fuel source, allowing for quick changeover to meet various needs and changing fuel pricing. This new addition to the MP sustainable energy series will provide the most up-to-date research on tubular combustion--some of it only now coming out of private proprietary protection. Plentiful examples of current applications along with a good explanation of background theory will offer readers an invaluable guide on this promising energy technology. Highlights include: * An introduction to the theory of tubular flames * The "how to" of maintaining stability of tubular flames through continuous combustion * Examples of both small-scal...

  14. Field determination of multipollutant, open area combustion source emission factors with a hexacopter unmanned aerial vehicle

    Science.gov (United States)

    Aurell, J.; Mitchell, W.; Chirayath, V.; Jonsson, J.; Tabor, D.; Gullett, B.

    2017-10-01

    An emission sensor/sampler system was coupled to a National Aeronautics and Space Administration (NASA) hexacopter unmanned aerial vehicle (UAV) to characterize gases and particles in the plumes emitted from open burning of military ordnance. The UAV/sampler was tested at two field sites with test and sampling flights spanning over 16 h of flight time. The battery-operated UAV was remotely maneuvered into the plumes at distances from the pilot of over 600 m and at altitudes of up to 122 m above ground level. While the flight duration could be affected by sampler payload (3.2-4.6 kg) and meteorological conditions, the 57 sampling flights, ranging from 4 to 12 min, were typically terminated when the plume concentrations of CO2 were diluted to near ambient levels. Two sensor/sampler systems, termed ;Kolibri,; were variously configured to measure particulate matter, metals, chloride, perchlorate, volatile organic compounds, chlorinated dioxins/furans, and nitrogen-based organics for determination of emission factors. Gas sensors were selected based on their applicable concentration range, light weight, freedom from interferents, and response/recovery times. Samplers were designed, constructed, and operated based on U.S. Environmental Protection Agency (EPA) methods and quality control criteria. Results show agreement with published emission factors and good reproducibility (e.g., 26% relative standard deviation for PM2.5). The UAV/Kolibri represents a significant advance in multipollutant emission characterization capabilities for open area sources, safely and effectively making measurements heretofore deemed too hazardous for personnel or beyond the reach of land-based samplers.

  15. GENOMICS SYMPOSIUM: Using genomic approaches to uncover sources of variation in age at puberty and reproductive longevity in sows

    Science.gov (United States)

    Genetic variants associated with traits such as age at puberty and litter size could provide insight into the underlying genetic sources of variation impacting sow reproductive longevity and productivity. Genomewide characterization and gene expression profiling were used using gilts from the Univer...

  16. Symposium summary

    International Nuclear Information System (INIS)

    Lawford, R.G.; Hubbard, K.G.

    1991-01-01

    For the purposes of the symposium, the Great Plains area was defined as the three Canadian Prairie provinces of Alberta, Saskatchewan and Manitoba, and eight north central states including North and South Dakota, Nebraska, Montana, Minnesota, Wyoming, Colorado and Kansas, covering over 3.5 million square kilometers. The presentations during the plenary sessions provided a comprehensive overview of the climate change subject and uncertainties, and the resource base and socio-economic structure which it will impact. There was a high degree of unanimity concerning research needs, which fell into seven areas: lack of understanding and models of linkages between climate, the resource base, and socio-economic structures; need for better regional climate change scenarios for use in impact studies; inadequate understanding of natural processes, particularly where physical, biophysical and biogeochemical parameters are operating; need for policy research to enable change of policies and informed decisions; readily available common databases for use in joint U.S./Canada climate studies; an information base and mechanisms to enable more effective communications; and networks to monitor the progress of global warming and its impact on resources

  17. Source apportionment of PM2.5 at multiple Northwest U.S. sites: Assessing regional winter wood smoke impacts from residential wood combustion

    Science.gov (United States)

    Kotchenruther, Robert A.

    2016-10-01

    Wood smoke from residential wood combustion is a significant source of elevated PM2.5 in many communities across the Northwest U.S. Accurate representation of residential wood combustion in source-oriented regional scale air quality models is challenging because of multiple uncertainties. As an alternative to source-oriented source apportionment, this work provides, through receptor-oriented source apportionment, an assessment of winter residential wood combustion impacts at multiple Northwest U.S. locations. Source apportionment was performed on chemically speciated PM2.5 from 19 monitoring sites using the Positive Matrix Factorization (PMF) receptor model. Each site was modeled independently, but a common data preparation and modeling protocol was used so that results were as comparable as possible across sites. Model solutions had from 4 to 8 PMF factors, depending on the site. PMF factors at each site were associated with a source classification (e.g., primary wood smoke), a dominant chemical composition (e.g., ammonium nitrate), or were some mixture. 15 different sources or chemical compositions were identified as contributing to PM2.5 across the 19 sites. The 6 most common were; aged wood smoke and secondary organic carbon, motor vehicles, primary wood smoke, ammonium nitrate, ammonium sulfate, and fugitive dust. Wood smoke was identified at every site, with both aged and primary wood smoke identified at most sites. Wood smoke contributions to PM2.5 were averaged for the two winter months of December and January, the months when wood smoke in the Northwest U.S. is mainly from residential wood combustion. The total contribution of residential wood combustion, that from primary plus aged smoke, ranged from 11.4% to 92.7% of average December and January PM2.5 depending on the site, with the highest percent contributions occurring in smaller towns that have fewer expected sources of winter PM2.5. Receptor modeling at multiple sites, such as that conducted in this

  18. Heavy coal combustion as the dominant source of particulate pollution in Taiyuan, China, corroborated by high concentrations of arsenic and selenium in PM10

    International Nuclear Information System (INIS)

    Xie, RuiKai; Seip, Hans Martin; Wibetoe, Grethe; Nori, Showan; McLeod, Cameron William

    2006-01-01

    Coal burning generates toxic elements, some of which are characteristic of coal combustion such as arsenic and selenium, besides conventional coal combustion products. Airborne particulate samples with aerodynamic diameter less than 10 μm (PM 10 ) were collected in Taiyuan, China, and multi-element analyses were performed by inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). Concentrations of arsenic and selenium from ambient air in Taiyuan (average 43 and 58 ng m -3 , respectively) were relatively high compared to what is reported elsewhere. Arsenic and selenium were found to be highly correlated (r=0.997), indicating an overwhelmingly dominant source. Correlation between these two chalcophile elements and the lithophile element Al is high (r is 0.75 and 0.72 for As and Se, respectively). This prompted the hypothesis that the particles were from coal combustion. The enrichment of the trace elements could be explained by the volatilization-condensation mechanism during coal combustion process. Even higher correlations of arsenic and selenium with PM 10 (r=0.90 and 0.88) give further support that airborne particulate pollution in Taiyuan is mainly a direct result of heavy coal consumption. This conclusion agrees with the results from our previous study of individual airborne particles in Taiyuan. (author)

  19. Hazardous air pollutant emissions from gas-fired combustion sources: emissions and the effects of design and fuel type

    Energy Technology Data Exchange (ETDEWEB)

    England, G.C.; McGrath, T.P. [GE-Energy and Environmental Research Corp., Irvine, CA (United States); Gilmer, L. [Equilon Enterprises, Bellaire, TX (United States); Seebold, J.G. [Chevron Research and Technology Co., Richmond, CA (United States); Lev-On, M. [ARCO, Los Angeles, CA (United States); Hunt, T. [American Petroleum Institute, Washington, DC (United States)

    2001-07-01

    Air emissions from gas-fired combustion devices such as boilers, process heaters, gas turbines and stationary reciprocating engines contain hazardous air pollutants (HAPs) subjected to consideration under the federal clean air act (CAA). This work presents a recently completed major research project to develop an understanding of HAP emissions from gas-fired boilers and process heaters and new HAP emission factors based on field emission tests of gas-fired external combustion devices used in the petroleum industry. The effect of combustion system design and operating parameters on HAP emissions determined by both field and research tests are discussed. Data from field tests of gas-fired petroleum industry boilers and heaters generally show very low emission levels of organic HAPs. A comparison of the emission data for boilers and process heaters, including units with and without various forms of NO{sub x} emission controls, showed no significant difference in organic HAP emission characteristics due to process or burner design. This conclusion is also supported by the results of research tests with different burner designs. Based on field tests of units fired with natural gas and various petroleum industry process gases and research tests in which gas composition was intentionally varied, organic HAP emissions were not determined to be significantly affected by the gas composition. Research data indicate that elevated organic HAP emission levels are found only under extreme operating conditions (starved air or high excess air combustion) associated with poor combustion. (author)

  20. Hazardous air pollutant emissions from gas-fired combustion sources: emissions and the effects of design and fuel type

    International Nuclear Information System (INIS)

    England, G.C.; McGrath, T.P.; Gilmer, L.; Seebold, J.G.; Lev-On, M.; Hunt, T.

    2001-01-01

    Air emissions from gas-fired combustion devices such as boilers, process heaters, gas turbines and stationary reciprocating engines contain hazardous air pollutants (HAPs) subjected to consideration under the federal clean air act (CAA). This work presents a recently completed major research project to develop an understanding of HAP emissions from gas-fired boilers and process heaters and new HAP emission factors based on field emission tests of gas-fired external combustion devices used in the petroleum industry. The effect of combustion system design and operating parameters on HAP emissions determined by both field and research tests are discussed. Data from field tests of gas-fired petroleum industry boilers and heaters generally show very low emission levels of organic HAPs. A comparison of the emission data for boilers and process heaters, including units with and without various forms of NO x emission controls, showed no significant difference in organic HAP emission characteristics due to process or burner design. This conclusion is also supported by the results of research tests with different burner designs. Based on field tests of units fired with natural gas and various petroleum industry process gases and research tests in which gas composition was intentionally varied, organic HAP emissions were not determined to be significantly affected by the gas composition. Research data indicate that elevated organic HAP emission levels are found only under extreme operating conditions (starved air or high excess air combustion) associated with poor combustion. (author)

  1. Automated Vehicles Symposium 2015

    CERN Document Server

    Beiker, Sven

    2016-01-01

    This edited book comprises papers about the impacts, benefits and challenges of connected and automated cars. It is the third volume of the LNMOB series dealing with Road Vehicle Automation. The book comprises contributions from researchers, industry practitioners and policy makers, covering perspectives from the U.S., Europe and Japan. It is based on the Automated Vehicles Symposium 2015 which was jointly organized by the Association of Unmanned Vehicle Systems International (AUVSI) and the Transportation Research Board (TRB) in Ann Arbor, Michigan, in July 2015. The topical spectrum includes, but is not limited to, public sector activities, human factors, ethical and business aspects, energy and technological perspectives, vehicle systems and transportation infrastructure. This book is an indispensable source of information for academic researchers, industrial engineers and policy makers interested in the topic of road vehicle automation.

  2. Objectives of the symposium

    International Nuclear Information System (INIS)

    Osborne, R.V.

    1992-01-01

    The author defined the objectives of the symposium as follows: to present and examine the recent evidence associating clusters of leukemia with sources of ionizing radiation; to examine the statistical basis for the analysis of clustering; to examine the underlying assumptions in epidemiological studies that clusters must have an environmental cause; to examine the extent to which we can take into account the biological causes of non-randomness in populations, particularly those of geographic and genetic origin; to evaluate the relative merits of different kinds of epidemiological studies for yielding significant information concerning clustering; to consider the potential utility of combining the results from existing studies, and whether new epidemiological studies might be helpful; to consider what other directions, including application of the technologies of molecular biology, are likely to help clarify the underlying mechanisms or causes

  3. SYMPOSIUM: Particle identification

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1989-07-15

    Typical elementary particle experiments consist of a source of interactions (an external beam and a fixed target or two colliding beams) and a detector system including most of the following components: a tracking system and analysis magnet, calorimetry (measurement of energy deposition), hadron and electron identification, muon detection, trigger counters and processors, and data acquisition electronics. Experiments aimed at future high luminosity hadron collider (proton-proton or proton-antiproton) projects such as an upgraded Tevatron at Fermilab, the Large Hadron Collider (LHC) idea at CERN, and the proposed US Superconducting Supercollider (SSC), must ideally cover the entire solid angle and be capable of not only surviving the collisions, but also providing high resolution event information at incredible interaction rates. The Symposium on Particle Identification at High Luminosity Hadron Colliders held at Fermilab from 5-7 April (sponsored by Fermilab, the US Department of Energy, and the SSC Central Design Group) focused on this single facet of detector technology.

  4. Automated Vehicles Symposium 2014

    CERN Document Server

    Beiker, Sven; Road Vehicle Automation 2

    2015-01-01

    This paper collection is the second volume of the LNMOB series on Road Vehicle Automation. The book contains a comprehensive review of current technical, socio-economic, and legal perspectives written by experts coming from public authorities, companies and universities in the U.S., Europe and Japan. It originates from the Automated Vehicle Symposium 2014, which was jointly organized by the Association for Unmanned Vehicle Systems International (AUVSI) and the Transportation Research Board (TRB) in Burlingame, CA, in July 2014. The contributions discuss the challenges arising from the integration of highly automated and self-driving vehicles into the transportation system, with a focus on human factors and different deployment scenarios. This book is an indispensable source of information for academic researchers, industrial engineers, and policy makers interested in the topic of road vehicle automation.

  5. Field Measurements of Trace Gases and Aerosols Emitted by Undersampled Combustion Sources Including Wood and Dung Cooking Fires, Garbage and Crop Residue Burning, and Indonesian Peat Fires

    Science.gov (United States)

    Stockwell, C.; Jayarathne, T. S.; Goetz, D.; Simpson, I. J.; Selimovic, V.; Bhave, P.; Blake, D. R.; Cochrane, M. A.; Ryan, K. C.; Putra, E. I.; Saharjo, B.; Stone, E. A.; DeCarlo, P. F.; Yokelson, R. J.

    2017-12-01

    Field measurements were conducted in Nepal and in the Indonesian province of Central Kalimantan to improve characterization of trace gases and aerosols emitted by undersampled combustion sources. The sources targeted included cooking with a variety of stoves, garbage burning, crop residue burning, and authentic peat fires. Trace gas and aerosol emissions were studied using a land-based Fourier transform infrared spectrometer, whole air sampling, photoacoustic extinctiometers (405 and 870nm), and filter samples that were analyzed off-line. These measurements were used to calculate fuel-based emission factors (EFs) for up to 90 gases, PM2.5, and PM2.5 constituents. The aerosol optical data measured included EFs for the scattering and absorption coefficients, the single scattering albedo (at 870 and 405 nm), as well as the absorption Ångström exponent. The emissions varied significantly by source, although light absorption by both brown and black carbon (BrC and BC, respectively) was important for all non-peat sources. For authentic peat combustion, the emissions of BC were negligible and absorption was dominated by organic aerosol. The field results from peat burning were in reasonable agreement with recent lab measurements of smoldering Kalimantan peat and compare well to the limited data available from other field studies. The EFs can be used with estimates of fuel consumption to improve regional emissions inventories and assessments of the climate and health impacts of these undersampled sources.

  6. 4th Abel Symposium

    CERN Document Server

    Friedlander, Eric; Jahren, Björn; Østvær, Paul

    2009-01-01

    The 2007 Abel Symposium took place at the University of Oslo in August 2007. The goal of the symposium was to bring together mathematicians whose research efforts have led to recent advances in algebraic geometry, algebraic K-theory, algebraic topology, and mathematical physics. A common theme of this symposium was the development of new perspectives and new constructions with a categorical flavor. As the lectures at the symposium and the papers of this volume demonstrate, these perspectives and constructions have enabled a broadening of vistas, a synergy between once-differentiated subjects, and solutions to mathematical problems both old and new.

  7. Indoor combustion and asthma.

    Science.gov (United States)

    Belanger, Kathleen; Triche, Elizabeth W

    2008-08-01

    Indoor combustion produces both gases (eg, nitrogen dioxide, carbon monoxide) and particulate matter that may affect the development or exacerbation of asthma. Sources in the home include both heating devices (eg, fireplaces, woodstoves, kerosene heaters, flued [ie, vented] or nonflued gas heaters) and gas stoves for cooking. This article highlights the recent literature examining associations between exposure to indoor combustion and asthma development and severity. Since asthma is a chronic condition affecting both children and adults, both age groups are included in this article. Overall, there is some evidence of an association between exposure to indoor combustion and asthma, particularly asthma symptoms in children. Some sources of combustion such as coal stoves have been more consistently associated with these outcomes than other sources such as woodstoves.

  8. 29th International Symposium on Shock Waves

    CERN Document Server

    Ranjan, Devesh

    2015-01-01

    This proceedings present the results of the 29th International Symposium on Shock Waves (ISSW29) which was held in Madison, Wisconsin, U.S.A., from July 14 to July 19, 2013. It was organized by the Wisconsin Shock Tube Laboratory, which is part of the College of Engineering of the University of Wisconsin-Madison. The ISSW29 focused on the following areas: Blast Waves, Chemically Reactive Flows, Detonation and Combustion,  Facilities, Flow Visualization, Hypersonic Flow, Ignition, Impact and Compaction, Industrial Applications, Magnetohydrodynamics, Medical and Biological Applications, Nozzle Flow, Numerical Methods, Plasmas, Propulsion, Richtmyer-Meshkov Instability, Shock-Boundary Layer Interaction, Shock Propagation and Reflection, Shock Vortex Interaction, Shock Waves in Condensed Matter, Shock Waves in Multiphase Flow, as well as Shock Waves in Rarefield Flow. The two Volumes contain the papers presented at the symposium and serve as a reference for the participants of the ISSW 29 and individuals interes...

  9. 30th International Symposium on Shock Waves

    CERN Document Server

    Sadot, Oren; Igra, Ozer

    2017-01-01

    These proceedings collect the papers presented at the 30th International Symposium on Shock Waves (ISSW30), which was held in Tel-Aviv Israel from July 19 to July 24, 2015. The Symposium was organized by Ortra Ltd. The ISSW30 focused on the state of knowledge of the following areas: Nozzle Flow, Supersonic and Hypersonic Flows with Shocks, Supersonic Jets, Chemical Kinetics, Chemical Reacting Flows, Detonation, Combustion, Ignition, Shock Wave Reflection and Interaction, Shock Wave Interaction with Obstacles, Shock Wave Interaction with Porous Media, Shock Wave Interaction with Granular Media, Shock Wave Interaction with Dusty Media, Plasma, Magnetohyrdrodynamics, Re-entry to Earth Atmosphere, Shock Waves in Rarefied Gases, Shock Waves in Condensed Matter (Solids and Liquids), Shock Waves in Dense Gases, Shock Wave Focusing, Richtmyer-Meshkov Instability, Shock Boundary Layer Interaction, Multiphase Flow, Blast Waves, Facilities, Flow Visualization, and Numerical Methods. The two volumes serve as a reference ...

  10. Particulate Matter 2.5 Exposure and Self-Reported Use of Wood Stoves and Other Indoor Combustion Sources in Urban Nonsmoking Homes in Norway.

    Directory of Open Access Journals (Sweden)

    Annah B Wyss

    Full Text Available Few studies have examined particulate matter (PM exposure from self-reported use of wood stoves and other indoor combustion sources in urban settings in developed countries. We measured concentrations of indoor PM < 2.5 microns (PM2.5 for one week with the MicroPEM™ nephelometer in 36 households in the greater Oslo, Norway metropolitan area. We examined indoor PM2.5 levels in relation to use of wood stoves and other combustion sources during a 7 day monitoring period using mixed effects linear models with adjustment for ambient PM2.5 levels. Mean hourly indoor PM2.5 concentrations were higher (p = 0.04 for the 14 homes with wood stove use (15.6 μg/m3 than for the 22 homes without (12.6 μg/m3. Moreover, mean hourly PM2.5 was higher (p = 0.001 for use of wood stoves made before 1997 (6 homes, 20.2 μg/m3, when wood stove emission limits were instituted in Norway, compared to newer wood stoves (8 homes, 11.9 μg/m3 which had mean hourly values similar to control homes. Increased PM2.5 levels during diary-reported burning of candles was detected independently of concomitant wood stove use. These results suggest that self-reported use of wood stoves, particularly older stoves, and other combustion sources, such as candles, are associated with indoor PM2.5 measurements in an urban population from a high income country.

  11. Overview of major hazards. Part 2: Source term; dispersion; combustion; blast, missiles, venting; fire; radiation; runaway reactions; toxic substances; dust explosions

    Science.gov (United States)

    Vilain, J.

    Approaches to major hazard assessment and prediction are reviewed. Source term: (phenomenology/modeling of release, influence on early stages of dispersion); dispersion (atmospheric advection, diffusion and deposition, emphasis on dense/cold gases); combustion (flammable clouds and mists covering flash fires, deflagration, transition to detonation; mostly unconfined/partly confined situations); blast formation, propagation, interaction with structures; catastrophic fires (pool fires, torches and fireballs; highly reactive substances) runaway reactions; features of more general interest; toxic substances, excluding toxicology; and dust explosions (phenomenology and protective measures) are discussed.

  12. Symposium on neutron scattering

    International Nuclear Information System (INIS)

    Lehmann, M.S.; Saenger, W.; Hildebrandt, G.; Dachs, H.

    1984-01-01

    Extended abstracts of the named symposium are presented. The first part of this report contains the abstracts of the lectures, the second those of the posters. Topics discussed on the symposium include neutron diffraction and neutron scattering studies in magnetism, solid state chemistry and physics, materials research. Some papers discussing instruments and methods are included too. (GSCH)

  13. Source apportionment of carbonaceous chemical species to fossil fuel combustion, biomass burning and biogenic emissions by a coupled radiocarbon-levoglucosan marker method

    Science.gov (United States)

    Salma, Imre; Németh, Zoltán; Weidinger, Tamás; Maenhaut, Willy; Claeys, Magda; Molnár, Mihály; Major, István; Ajtai, Tibor; Utry, Noémi; Bozóki, Zoltán

    2017-11-01

    An intensive aerosol measurement and sample collection campaign was conducted in central Budapest in a mild winter for 2 weeks. The online instruments included an FDMS-TEOM, RT-OC/EC analyser, DMPS, gas pollutant analysers and meteorological sensors. The aerosol samples were collected on quartz fibre filters by a low-volume sampler using the tandem filter method. Elemental carbon (EC), organic carbon (OC), levoglucosan, mannosan, galactosan, arabitol and mannitol were determined, and radiocarbon analysis was performed on the aerosol samples. Median atmospheric concentrations of EC, OC and PM2.5 mass were 0.97, 4.9 and 25 µg m-3, respectively. The EC and organic matter (1.6 × OC) accounted for 4.8 and 37 %, respectively, of the PM2.5 mass. Fossil fuel (FF) combustion represented 36 % of the total carbon (TC = EC + OC) in the PM2.5 size fraction. Biomass burning (BB) was a major source (40 %) for the OC in the PM2.5 size fraction, and a substantial source (11 %) for the PM10 mass. We propose and apply here a novel, straightforward, coupled radiocarbon-levoglucosan marker method for source apportionment of the major carbonaceous chemical species. The contributions of EC and OC from FF combustion (ECFF and OCFF) to the TC were 11.0 and 25 %, respectively, EC and OC from BB (ECBB and OCBB) were responsible for 5.8 and 34 %, respectively, of the TC, while the OC from biogenic sources (OCBIO) made up 24 % of the TC. The overall relative uncertainty of the OCBIO and OCBB contributions was assessed to be up to 30 %, while the relative uncertainty for the other apportioned species is expected to be below 20 %. Evaluation of the apportioned atmospheric concentrations revealed some of their important properties and relationships among them. ECFF and OCFF were associated with different FF combustion sources. Most ECFF was emitted by vehicular road traffic, while the contribution of non-vehicular sources such as domestic and industrial heating or cooking using gas, oil or coal

  14. Collection of abstracts. 6. national symposium on radiation dosimetry

    International Nuclear Information System (INIS)

    1983-08-01

    Abstracts are given of the total of 137 papers presented at the symposium. The papers discussed radiation dosimetry methods, dosemeters and detectors, the metrology and calibration of radiation sources, calibration standards, and radioactivity monitoring. (J.P.)

  15. SNEAP 78: symposium of Northeastern accelerator personnel

    Energy Technology Data Exchange (ETDEWEB)

    Bair, J.K.; Jones, C.M. (comps.)

    1979-06-01

    Session topics of the symposium include: tubes, vacuum, and conditioning; gaseous insulation and gas handling systems; charging systems; safety; ion sources; projects recently completed or under construction; stripping; beam transport; control systems; and telemetry. Twenty eight items were included separately in the data base. (GHT)

  16. CONTEXT 2015 Doctorial Symposium

    DEFF Research Database (Denmark)

    Eklund, Peter; wegener, rebekah

    2015-01-01

    What is the CONTEXT 2015 Doctoral Symposium? The CONTEXT 2015 Doctoral Symposium is an opportunity for doctoral researchers to showcase their work and discuss problems, challenges, and ideas in an open and collegial environment with expert feedback. The Doctoral Symposium is a workshop for doctoral...... feedback and general advice in a constructive atmosphere. Doctoral researchers will present and discuss their research in a supportive atmosphere with other doctoral researchers and an international panel of established researchers that provide expert feedback. The workshop will take place on a single full...... day, Monday November 2, 2015, the day prior to the start of the main CONTEXT 2015 conference....

  17. 78 FR 54606 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2013-09-05

    ... Combustion Engines; New Source Performance Standards for Stationary Internal Combustion Engines AGENCY... hazardous air pollutants for stationary reciprocating internal combustion engines and the standards of performance for stationary internal combustion engines. Subsequently, the EPA received three petitions for...

  18. Combustion engineering

    CERN Document Server

    Ragland, Kenneth W

    2011-01-01

    Introduction to Combustion Engineering The Nature of Combustion Combustion Emissions Global Climate Change Sustainability World Energy Production Structure of the Book   Section I: Basic Concepts Fuels Gaseous Fuels Liquid Fuels Solid Fuels Problems Thermodynamics of Combustion Review of First Law Concepts Properties of Mixtures Combustion StoichiometryChemical EnergyChemical EquilibriumAdiabatic Flame TemperatureChemical Kinetics of CombustionElementary ReactionsChain ReactionsGlobal ReactionsNitric Oxide KineticsReactions at a Solid SurfaceProblemsReferences  Section II: Combustion of Gaseous and Vaporized FuelsFlamesLaminar Premixed FlamesLaminar Flame TheoryTurbulent Premixed FlamesExplosion LimitsDiffusion FlamesGas-Fired Furnaces and BoilersEnergy Balance and EfficiencyFuel SubstitutionResidential Gas BurnersIndustrial Gas BurnersUtility Gas BurnersLow Swirl Gas BurnersPremixed-Charge Engine CombustionIntroduction to the Spark Ignition EngineEngine EfficiencyOne-Zone Model of Combustion in a Piston-...

  19. XXth symposium neuroradiologicum 2014

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-09-15

    The volume includes abstracts from lectures and poster presentations during the XXth symposium neuroradiologicum 2014 covering the following issues: Stroke, head and neck, pediatric diagnostic neuroradiology, spine and interventional neuroradiology, adult diagnostic neuroradiology, intravascular interventional neuroradiology.

  20. COST 516 Tribology Symposium

    Energy Technology Data Exchange (ETDEWEB)

    Ronkainen, H.; Holmberg, K. [eds.

    1998-11-01

    Cost 516 Tribology action is the first joint European research action focusing on tribology, which originates in the approval of its Memorandum of understanding in February 1994. The COST 516 Tribology Symposium took place in Espoo, Finland from 14th to 15th May 1998. This was the first Symposium of the COST 516 Tribology action. The large number of research contributions at the Symposium, altogether almost SO, and their scientific and technical level, is an indication of the importance and significance of tribology research. The symposium proceedings contain papers in a wide variety of subjects, covering the three categories of the COST 516 Tribology action, namely Grease lubrication (GRIT), Tribology of renewable environmentally adapted lubricants (REAL) and Coatings and surface treatments (CAST). (orig.)

  1. Combustion synthesized indium-tin-oxide (ITO) thin film for source/drain electrodes in all solution-processed oxide thin-film transistors

    International Nuclear Information System (INIS)

    Tue, Phan Trong; Inoue, Satoshi; Takamura, Yuzuru; Shimoda, Tatsuya

    2016-01-01

    We report combustion solution synthesized (SCS) indium-tin-oxide (ITO) thin film, which is a well-known transparent conductive oxide, for source/drain (S/D) electrodes in solution-processed amorphous zirconium-indium-zinc-oxide TFT. A redox-based combustion synthetic approach is applied to ITO thin film using acetylacetone as a fuel and metal nitrate as oxidizer. The structural and electrical properties of SCS-ITO precursor solution and thin films were systematically investigated with changes in tin concentration, indium metal precursors, and annealing conditions such as temperature, time, and ambient. It was found that at optimal conditions the SCS-ITO thin film exhibited high crystalline quality, atomically smooth surface (RMS ∝ 4.1 Aa), and low electrical resistivity (4.2 x 10 -4 Ω cm). The TFT using SCS-ITO film as the S/D electrodes showed excellent electrical properties with negligible hysteresis. The obtained ''on/off'' current ratio, subthreshold swing factor, subthreshold voltage, and field-effect mobility were 5 x 10 7 , 0.43 V/decade, 0.7 V, and 2.1 cm 2 /V s, respectively. The performance and stability of the SCS-ITO TFT are comparable to those of the sputtered-ITO TFT, emphasizing that the SCS-ITO film is a promising candidate for totally solution-processed oxide TFTs. (orig.)

  2. Study of a Slightly Enriched R Reactor Fuel by Means of a Pulsed Neutron Source; Etude d'un reacteur a combustible legerement enrichi (rubeole) a l'aide de sources pulsees de neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Sagot, M.; Tellier, H. [Commissariat a l' Energie Atomique. Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

    1962-04-01

    A Be O moderated reactor using slightly enriched uranium oxide as fuel was studied by the pulsed neutron source technique. The neutron lifetime was measured in two different cores without reflector, then attempts were made at the measurement of great negative reactivities introduced into the reactor under the following forms: decrease of the volume of the un reflected core, introduction of absorbing cadmium rods, removal of fuel at the periphery of the critical core while maintaining a constant height, and substitution of fuel elements by less reactive elements. In all cases, the results are compared with the data obtained by another type of experiment or by computation. (author) [French] Nous avons applique la methode des sources pulsees de neutrons a un reacteur utilisant de l'oxyde d'uranium legerement enrichi, modere a l'oxyde de beryllium et, apres avoir mesure le temps de vie des neutrons dans deux coeurs differents non reflechis, nous avons porte notre effort, sur la mesure de reactivites negatives importantes introduites dans le reacteur sous differentes formes: - diminution du volume du coeur non reflechi, - introduction de barres absorbantes en cadmium, - enlevement de combustible a la peripherie du coeur critique, tout en conservant une hauteur constante, - substitution d'elements de combustible par des elements moins reactifs. Dans tous les cas, les resultats sont compares aux valeurs obtenues par un autre type d'experience ou par le calcul. (auteur)

  3. Study of a Slightly Enriched R Reactor Fuel by Means of a Pulsed Neutron Source; Etude d'un reacteur a combustible legerement enrichi (rubeole) a l'aide de sources pulsees de neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Sagot, M; Tellier, H [Commissariat a l' Energie Atomique. Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

    1962-04-01

    A Be O moderated reactor using slightly enriched uranium oxide as fuel was studied by the pulsed neutron source technique. The neutron lifetime was measured in two different cores without reflector, then attempts were made at the measurement of great negative reactivities introduced into the reactor under the following forms: decrease of the volume of the un reflected core, introduction of absorbing cadmium rods, removal of fuel at the periphery of the critical core while maintaining a constant height, and substitution of fuel elements by less reactive elements. In all cases, the results are compared with the data obtained by another type of experiment or by computation. (author) [French] Nous avons applique la methode des sources pulsees de neutrons a un reacteur utilisant de l'oxyde d'uranium legerement enrichi, modere a l'oxyde de beryllium et, apres avoir mesure le temps de vie des neutrons dans deux coeurs differents non reflechis, nous avons porte notre effort, sur la mesure de reactivites negatives importantes introduites dans le reacteur sous differentes formes: - diminution du volume du coeur non reflechi, - introduction de barres absorbantes en cadmium, - enlevement de combustible a la peripherie du coeur critique, tout en conservant une hauteur constante, - substitution d'elements de combustible par des elements moins reactifs. Dans tous les cas, les resultats sont compares aux valeurs obtenues par un autre type d'experience ou par le calcul. (auteur)

  4. 10. Symposium energy and environment - responsibility for the future

    International Nuclear Information System (INIS)

    2003-01-01

    The symposium discussed important aspects relating to the subject of energy and environment. The detailed and well-funded lectures and statements were received with great interest by the 120 attendants. The discussion focused on problems of power generation and consumption, increased shares of renewable energy sources, ethical and theological questions. The symposium received funds from Deutsche Bundesstiftung Umwelt and was well accepted by the press [de

  5. Proceedings of the 5th underground coal conversion symposium

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-05-01

    The 5th underground coal conversion symposium was held at Alexandria, Virginia, June 18--21, 1979. Thirty-three papers have been entered individually into EDB and ERA. Seven papers were also abstracted for Energy Abstracts for Policy Analysis. Seven papers had been entered previously from other sources. The symposium was sponsored by the US Department of Energy, Division of Fossil Fuel Extraction. (LTN)

  6. Symposium on risk assessment and adoption of decisions: VALDOR-2001

    International Nuclear Information System (INIS)

    Kovalevich, O.M.

    2001-01-01

    The symposium was held in Stockholm (Sweden), 9 - 15 June 2001. Reports involved following fundamental problems: prospects for radioactive waste management, investigations into risk control, risk control and regulations, bases for risk assessment, the role of mass media and participation of the community in adoption of complex decisions. Much attention at the symposium is given to radioactive wastes, radiation sources, risk of chemical plants and risk assessment in biotechnology. Practically all reports were devoted to relations with the community [ru

  7. Source apportionment of carbonaceous chemical species to fossil fuel combustion, biomass burning and biogenic emissions by a coupled radiocarbon–levoglucosan marker method

    Directory of Open Access Journals (Sweden)

    I. Salma

    2017-11-01

    Full Text Available An intensive aerosol measurement and sample collection campaign was conducted in central Budapest in a mild winter for 2 weeks. The online instruments included an FDMS-TEOM, RT-OC/EC analyser, DMPS, gas pollutant analysers and meteorological sensors. The aerosol samples were collected on quartz fibre filters by a low-volume sampler using the tandem filter method. Elemental carbon (EC, organic carbon (OC, levoglucosan, mannosan, galactosan, arabitol and mannitol were determined, and radiocarbon analysis was performed on the aerosol samples. Median atmospheric concentrations of EC, OC and PM2.5 mass were 0.97, 4.9 and 25 µg m−3, respectively. The EC and organic matter (1.6  ×  OC accounted for 4.8 and 37 %, respectively, of the PM2.5 mass. Fossil fuel (FF combustion represented 36 % of the total carbon (TC  =  EC + OC in the PM2.5 size fraction. Biomass burning (BB was a major source (40 % for the OC in the PM2.5 size fraction, and a substantial source (11 % for the PM10 mass. We propose and apply here a novel, straightforward, coupled radiocarbon–levoglucosan marker method for source apportionment of the major carbonaceous chemical species. The contributions of EC and OC from FF combustion (ECFF and OCFF to the TC were 11.0 and 25 %, respectively, EC and OC from BB (ECBB and OCBB were responsible for 5.8 and 34 %, respectively, of the TC, while the OC from biogenic sources (OCBIO made up 24 % of the TC. The overall relative uncertainty of the OCBIO and OCBB contributions was assessed to be up to 30 %, while the relative uncertainty for the other apportioned species is expected to be below 20 %. Evaluation of the apportioned atmospheric concentrations revealed some of their important properties and relationships among them. ECFF and OCFF were associated with different FF combustion sources. Most ECFF was emitted by vehicular road traffic, while the contribution of non-vehicular sources such as

  8. International symposium 'Energetics 2004'. Symposium proceedings. Book 1

    International Nuclear Information System (INIS)

    2004-01-01

    The holding of this Symposium was initiated by ZEMAK - Macedonian Energy Association that for the last tens of years established itself in the national and international scientific and professional circles as a competent association of professionals with the main goal to follow, promote and improve the energy sector in the country. Having in mind the fact that the power energy sector as a fundamental sector plays a main role in the development and the improvement of the rest of the industry, and in the same time has a tremendous impact on the sustainable development of the entire economy of a country, power energy sector in fact has the paramount importance in the business environment of our country. Thus, ZEMAK has historically important role as a responsible and permanent driver, promoter and initiator for resolving of all-important questions directly or indirectly interconnected with the power energy sector in the country, and therefore the entire economy in the country as well. Following the past, ZEMAK had and would always have needs of organizing national and international symposiums and workshops as a panel where directly at one place national and international power energy experts could initiate, debate and resolve all up-to-date questions in the present energy sector in Macedonia, could analyze the modern world trends in the energy sector and try to find appropriate models for their application for further development and improvement of the energy sector in our country. This international symposium has the main goal to concentrate on a single place everybody who has power energy as a permanent preoccupation and/or vocation and professional interest. To aggregate on one place various experts, from the Academy and Universities, from the business circles and companies who are preoccupied with power energy directly or indirectly in their everyday life and work. During the Symposium more than 90 scientific and/or professional papers were presented and discussed

  9. International symposium 'Energetics 2004'. Symposium proceedings. Book 2

    International Nuclear Information System (INIS)

    2004-01-01

    The holding of this Symposium was initiated by ZEMAK - Macedonian Energy Association that for the last tens of years established itself in the national and international scientific and professional circles as a competent association of professionals with the main goal to follow, promote and improve the energy sector in the country. Having in mind the fact that the power energy sector as a fundamental sector plays a main role in the development and the improvement of the rest of the industry, and in the same time has a tremendous impact on the sustainable development of the entire economy of a country, power energy sector in fact has the paramount importance in the business environment of our country. Thus, ZEMAK has historically important role as a responsible and permanent driver, promoter and initiator for resolving of all-important questions directly or indirectly interconnected with the power energy sector in the country, and therefore the entire economy in the country as well. Following the past, ZEMAK had and would always have needs of organizing national and international symposiums and workshops as a panel where directly at one place national and international power energy experts could initiate, debate and resolve all up-to-date questions in the present energy sector in Macedonia, could analyze the modern world trends in the energy sector and try to find appropriate models for their application for further development and improvement of the energy sector in our country. This international symposium has the main goal to concentrate on a single place everybody who has power energy as a permanent preoccupation and/or vocation and professional interest. To aggregate on one place various experts, from the Academy and Universities, from the business circles and companies who are preoccupied with power energy directly or indirectly in their everyday life and work. During the Symposium more than 90 scientific and/or professional papers were presented and discussed

  10. Coal combustion by-product quality at two stoker boilers: Coal source vs. fly ash collection system design

    Energy Technology Data Exchange (ETDEWEB)

    Mardon, Sarah M. [Kentucky Department for Environmental Protection, Division of Water, Frankfort, KY 40601 (United States); Hower, James C. [University of Kentucky Center for Applied Energy Research, 2540 Research Park Drive, Lexington, KY 40511 (United States); O' Keefe, Jennifer M.K. [Morehead State University, Department of Physical Sciences, Morehead, KY 40351 (United States); Marks, Maria N. [Environmental Consulting Services, Lexington, KY 40508 (United States); Hedges, Daniel H. [University of Kentucky, Department of Earth and Environmental Sciences, Lexington, KY 40506 (United States)

    2008-09-15

    Fly ashes from two stoker boilers burning Pennsylvanian Eastern Kentucky high volatile A bituminous coal blends were examined for their petrology and chemistry. The source coals have similar trace element contents. One of the ash collection systems was retrofitted with a baghouse (fabric filter) system, collecting a finer fly ash at a cooler flue gas temperature than the plant that has not been reconfigured. The baghouse ash has a markedly higher trace element content than the coarser fly ash from the other plant. The enhanced trace element content is most notable in the As concentration, reaching nearly 9000 ppm (ash basis) for one of the collection units. Differences in the ash chemistry are not due to any substantial differences in the coal source, even though the coal sources were from different counties and from different coal beds, but rather to the improved pollution control system in the steam plant with the higher trace element contents. (author)

  11. Abel Symposium 2015

    CERN Document Server

    Larsen, Nadia; Neshveyev, Sergey; Skau, Christian

    2016-01-01

    Like the first Abel Symposium, held in 2004, the Abel Symposium 2015 focused on operator algebras. It is interesting to see the remarkable advances that have been made in operator algebras over these years, which strikingly illustrate the vitality of the field. A total of 26 talks were given at the symposium on a variety of themes, all highlighting the richness of the subject. The field of operator algebras was created in the 1930s and was motivated by problems of quantum mechanics. It has subsequently developed well beyond its initial intended realm of applications and expanded into such diverse areas of mathematics as representation theory, dynamical systems, differential geometry, number theory and quantum algebra. One branch, known as “noncommutative geometry”, has become a powerful tool for studying phenomena that are beyond the reach of classical analysis. This volume includes research papers that present new results, surveys that discuss the development of a specific line of research, and articles ...

  12. 77 FR 33811 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2012-06-07

    ... 63 National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines; New Source Performance Standards for Stationary Internal Combustion Engines; Proposed Rule #0;#0... Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines; New Source...

  13. 77 FR 37361 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2012-06-21

    ... National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines; New Source Performance Standards for Stationary Internal Combustion Engines AGENCY: Environmental Protection... Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines; New Source Performance...

  14. The Abel Symposium 2013

    CERN Document Server

    Irgens, Marius; Wold, Erlend

    2015-01-01

    This book focuses on complex geometry and covers highly active topics centered around geometric problems in several complex variables and complex dynamics, written by some of the world’s leading experts in their respective fields. This book features research and expository contributions from the 2013 Abel Symposium, held at the Norwegian University of Science and Technology Trondheim on July 2-5, 2013. The purpose of the symposium was to present the state of the art on the topics, and to discuss future research directions.

  15. Real-time measurements of particulate matter and polycyclic aromatic hydrocarbon emissions from stationary combustion sources used in oil and gas production

    International Nuclear Information System (INIS)

    Hahn, D. W.; Hencken, K. R.; Johnsen, H. A.; Ross, J. R.; Walsh, P. M.

    1998-01-01

    Particulate matter emissions and some components of the particles were measured in the exhaust from combustion equipment used in oil and gas production operations near Bakersfield, California. The combustion sources included a 22.5 MW (electric) turbine generator, a 342-Bhp rich-burn spark ignition engine, and a 50 million Btu/h steam generator, all fired using natural gas. The particle components and measurement techniques were as follows: (1) Calcium, magnesium, sodium, silicon, and iron were measured using laser-induced breakdown spectroscopy (LIBS), (2) particle-bound polycyclic aromatic hydrocarbons (PAH) were detected using the charge produced by photoionization, (3) particles having sizes between 0.1 and 7.5 (micro)m were counted using an instrument based on light scattering, and (4) total particulate matter was measured according to US EPA Method 5. Not all of the methods were applied to all of the sources. Measurements were also made in the ambient air near the combustion air inlets to the units, for comparison with the concentrations in the exhaust, but the inlet and outlet measurements were not done simultaneously. Calcium, sodium, and silicon were found in the exhaust from the steam generator at concentrations similar to those in the ambient air near the inlet to the burner. Sodium and silicon were observed in the engine exhaust at levels a factor of four higher than their concentrations in the air. The principal metal observed in the engine exhaust was calcium, a component of the lubricating oil, at a concentration of 11.6 (micro)g/m 3 . The air entering the gas turbine is filtered, so the average concentrations of metals in the turbine exhaust under steady operating conditions were even lower than in the air. During start-up following a shut-down to wash the turbine, silicon and iron were the major species in the stack, at concentrations of 6.4 and 16.2 (micro)g/m 3 , respectively. A possible source of silicon is the water injected into the turbine

  16. Summary of Numerical Modeling for Underground Nuclear Test Monitoring Symposium

    International Nuclear Information System (INIS)

    Taylor, S.R.; Kamm, J.R.

    1993-01-01

    This document contains the Proceedings of the Numerical Modeling for Underground Nuclear Test Monitoring Symposium held in Durango, Colorado on March 23-25, 1993. The symposium was sponsored by the Office of Arms Control and Nonproliferation of the United States Department of Energy and hosted by the Source Region Program of Los Alamos National Laboratory. The purpose of the meeting was to discuss state-of-the-art advances in numerical simulations of nuclear explosion phenomenology for the purpose of test ban monitoring. Another goal of the symposium was to promote discussion between seismologists and explosion source-code calculators. Presentation topics include the following: numerical model fits to data, measurement and characterization of material response models, applications of modeling to monitoring problems, explosion source phenomenology, numerical simulations and seismic sources

  17. Sixth underground coal-conversion symposium

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The sixth annual underground coal conversion symposium was held at Shangri-la near Afton, Oklahoma, July 13 to 17, 1980. Sessions were developed to: Doe Field Programs, Major Industry Activity, Mathematical Modeling, Laboratory Studies, Environmental Studies, Economics, Instruments and Controls, and General Topics. Fifty-two papers from the proceedings have been entered individually into EDB and ERA. Thirteen papers had been entered previously from other sources. (LTN)

  18. Transient flow combustion

    Science.gov (United States)

    Tacina, R. R.

    1984-01-01

    Non-steady combustion problems can result from engine sources such as accelerations, decelerations, nozzle adjustments, augmentor ignition, and air perturbations into and out of the compressor. Also non-steady combustion can be generated internally from combustion instability or self-induced oscillations. A premixed-prevaporized combustor would be particularly sensitive to flow transients because of its susceptability to flashback-autoignition and blowout. An experimental program, the Transient Flow Combustion Study is in progress to study the effects of air and fuel flow transients on a premixed-prevaporized combustor. Preliminary tests performed at an inlet air temperature of 600 K, a reference velocity of 30 m/s, and a pressure of 700 kPa. The airflow was reduced to 1/3 of its original value in a 40 ms ramp before flashback occurred. Ramping the airflow up has shown that blowout is more sensitive than flashback to flow transients. Blowout occurred with a 25 percent increase in airflow (at a constant fuel-air ratio) in a 20 ms ramp. Combustion resonance was found at some conditions and may be important in determining the effects of flow transients.

  19. Alcohol combustion chemistry

    KAUST Repository

    Sarathy, Mani

    2014-10-01

    Alternative transportation fuels, preferably from renewable sources, include alcohols with up to five or even more carbon atoms. They are considered promising because they can be derived from biological matter via established and new processes. In addition, many of their physical-chemical properties are compatible with the requirements of modern engines, which make them attractive either as replacements for fossil fuels or as fuel additives. Indeed, alcohol fuels have been used since the early years of automobile production, particularly in Brazil, where ethanol has a long history of use as an automobile fuel. Recently, increasing attention has been paid to the use of non-petroleum-based fuels made from biological sources, including alcohols (predominantly ethanol), as important liquid biofuels. Today, the ethanol fuel that is offered in the market is mainly made from sugar cane or corn. Its production as a first-generation biofuel, especially in North America, has been associated with publicly discussed drawbacks, such as reduction in the food supply, need for fertilization, extensive water usage, and other ecological concerns. More environmentally friendly processes are being considered to produce alcohols from inedible plants or plant parts on wasteland. While biofuel production and its use (especially ethanol and biodiesel) in internal combustion engines have been the focus of several recent reviews, a dedicated overview and summary of research on alcohol combustion chemistry is still lacking. Besides ethanol, many linear and branched members of the alcohol family, from methanol to hexanols, have been studied, with a particular emphasis on butanols. These fuels and their combustion properties, including their ignition, flame propagation, and extinction characteristics, their pyrolysis and oxidation reactions, and their potential to produce pollutant emissions have been intensively investigated in dedicated experiments on the laboratory and the engine scale

  20. Influence of transport from urban sources and domestic biomass combustion on the air quality of a mountain area.

    Science.gov (United States)

    Petracchini, Francesco; Romagnoli, Paola; Paciucci, Lucia; Vichi, Francesca; Imperiali, Andrea; Paolini, Valerio; Liotta, Flavia; Cecinato, Angelo

    2017-02-01

    The environmental influence of biomass burning for civil uses was investigated through the determination of several air toxicants in the town of Leonessa and its surroundings, in the mountain region of central Italy. Attention was focussed on PM 10 , polycyclic aromatic hydrocarbons (PAHs) and regulated gaseous pollutants (nitrogen dioxide, ozone and benzene). Two in-field campaigns were carried out during the summer 2012 and the winter 2013. Contemporarily, air quality was monitored in Rome and other localities of Lazio region. In the summer, all pollutants, with the exception of ozone, were more abundant in Rome. On the other hand, in the winter, PAH concentration was higher in Leonessa (15.8 vs. 7.0 ng/m 3 ), while PM 10 was less concentrated (22 vs. 34 μg/m 3 ). Due to lack of other important sources and to limited impact of vehicle traffic, biomass burning was identified as the major PAH source in Leonessa during the winter. This hypothesis was confirmed by PAH molecular signature of PM 10 (i.e. concentration diagnostic ratios and 206 ion mass trace in the chromatograms). A similar phenomenon (i.e. airborne particulate levels similar to those of the capital city but higher PAH loads) was observed in other locations of the province, suggesting that uncontrolled biomass burning contributed to pollution across the Rome metropolitan area.

  1. Birch symposium proceedings

    Science.gov (United States)

    W.T. Doolittle; P.E. Bruns

    1969-01-01

    This symposium on yellow and paper birch is the third in a series of meetings devoted to discussion of our fine hardwood timber species. The first meeting, held at Carbondale, Illinois, in 1966, dealt with black walnut. The second, held at Houghton, Michigan, in 1968, dealt with sugar maple. The purpose of this third meeting is to bring together our present knowledge...

  2. Symposium summary and prognosis

    International Nuclear Information System (INIS)

    Bjorken, J.D.

    1975-11-01

    The summary of the symposium on high energy physics experiments includes phenomena at low energies, the foundations of physics (considered to be mainly gravitation and quantum electrodynamics), standards of reference used for interpretation of experimental data, the new physics, particle proliferation, theoretical development, and a prognosis for the future

  3. European Cosmic Ray Symposium

    CERN Multimedia

    Pattison,B

    1992-01-01

    13me Symposium qui se déroule du 27 au 31 juillet pour la première fois au Cern. Brian Pattison ouvre la cérémonie et donne la parole à Dr.Ugland (qui représente le DG C.Rubbia excusé) et d'autres intervenants

  4. Issues of HRD. Symposium.

    Science.gov (United States)

    2002

    This document contains three papers from a symposium on issues of human resource development (HRD). "The Complex Roots of Human Resource Development" (Monica Lee) discusses the roots of HRD within the framework of the following views of management: (1) classic (the view that managers must be able to create appropriate rules and…

  5. Biofuels combustion.

    Science.gov (United States)

    Westbrook, Charles K

    2013-01-01

    This review describes major features of current research in renewable fuels derived from plants and from fatty acids. Recent and ongoing fundamental studies of biofuel molecular structure, oxidation reactions, and biofuel chemical properties are reviewed, in addition to combustion applications of biofuels in the major types of engines in which biofuels are used. Biofuels and their combustion are compared with combustion features of conventional petroleum-based fuels. Two main classes of biofuels are described, those consisting of small, primarily alcohol, fuels (particularly ethanol, n-butanol, and iso-pentanol) that are used primarily to replace or supplement gasoline and those derived from fatty acids and used primarily to replace or supplement conventional diesel fuels. Research efforts on so-called second- and third-generation biofuels are discussed briefly.

  6. Fast combustion waves and chemi-ionization processes in a flame initiated by a powerful local plasma source in a closed reactor

    Science.gov (United States)

    Artem'ev, K. V.; Berezhetskaya, N. K.; Kazantsev, S. Yu.; Kononov, N. G.; Kossyi, I. A.; Popov, N. A.; Tarasova, N. M.; Filimonova, E. A.; Firsov, K. N.

    2015-01-01

    Results are presented from experimental studies of the initiation of combustion in a stoichiometric methane–oxygen mixture by a freely localized laser spark and by a high-current multispark discharge in a closed chamber. It is shown that, preceding the stage of ‘explosive’ inflammation of a gas mixture, there appear two luminous objects moving away from the initiator along an axis: a relatively fast and uniform wave of ‘incomplete combustion’ under laser spark ignition and a wave with a brightly glowing plasmoid behind under ignition from high-current slipping surface discharge. The gas mixtures in both the ‘preflame’ and developed-flame states are characterized by a high degree of ionization as the result of chemical ionization (plasma density ne≈1012 cm−3) and a high frequency of electron–neutral collisions (νen≈1012 s−1). The role of chemical ionization in constructing an adequate theory for the ignition of a gas mixture is discussed. The feasibility of the microwave heating of both the preflame and developed-flame plasma, supplementary to a chemical energy source, is also discussed. PMID:26170426

  7. Combustion 2000

    Energy Technology Data Exchange (ETDEWEB)

    A. Levasseur; S. Goodstine; J. Ruby; M. Nawaz; C. Senior; F. Robson; S. Lehman; W. Blecher; W. Fugard; A. Rao; A. Sarofim; P. Smith; D. Pershing; E. Eddings; M. Cremer; J. Hurley; G. Weber; M. Jones; M. Collings; D. Hajicek; A. Henderson; P. Klevan; D. Seery; B. Knight; R. Lessard; J. Sangiovanni; A. Dennis; C. Bird; W. Sutton; N. Bornstein; F. Cogswell; C. Randino; S. Gale; Mike Heap

    2001-06-30

    . To achieve these objectives requires a change from complete reliance of coal-fired systems on steam turbines (Rankine cycles) and moving forward to a combined cycle utilizing gas turbines (Brayton cycles) which offer the possibility of significantly greater efficiency. This is because gas turbine cycles operate at temperatures well beyond current steam cycles, allowing the working fluid (air) temperature to more closely approach that of the major energy source, the combustion of coal. In fact, a good figure of merit for a HIPPS design is just how much of the enthalpy from coal combustion is used by the gas turbine. The efficiency of a power cycle varies directly with the temperature of the working fluid and for contemporary gas turbines the optimal turbine inlet temperature is in the range of 2300-2500 F (1260-1371 C). These temperatures are beyond the working range of currently available alloys and are also in the range of the ash fusion temperature of most coals. These two sets of physical properties combine to produce the major engineering challenges for a HIPPS design. The UTRC team developed a design hierarchy to impose more rigor in our approach. Once the size of the plant had been determined by the choice of gas turbine and the matching steam turbine, the design process of the High Temperature Advanced Furnace (HITAF) moved ineluctably to a down-fired, slagging configuration. This design was based on two air heaters: one a high temperature slagging Radiative Air Heater (RAH) and a lower temperature, dry ash Convective Air Heater (CAH). The specific details of the air heaters are arrived at by an iterative sequence in the following order:-Starting from the overall Cycle requirements which set the limits for the combustion and heat transfer analysis-The available enthalpy determined the range of materials, ceramics or alloys, which could tolerate the temperatures-Structural Analysis of the designs proved to be the major limitation-Finally the commercialization

  8. Design of an hybrid source with fuel cell and super-capacitors; Conception d'une source hybride utilisant une pile a combustible et des supercondensateurs

    Energy Technology Data Exchange (ETDEWEB)

    Thounthong, Ph

    2005-12-15

    The design and testing of a purely super-capacitor energy storage device as auxiliary power source in electrical vehicle applications having a PEM fuel cell as main source are presented. The two control strategies are explained. The control algorithms are that fuel cell is simply operating in almost steady state conditions in order to lessen the mechanical stresses of fuel cell and to ensure a good synchronization between fuel flow and fuel cell current. Super-capacitors are functioning during absence of energy from fuel cell, transient energy delivery or transient energy recovery. The system utilizes two modules of SAFT super-capacitive storage device. This device is connected to a 42 V DC bus by a 2-quadrant dc/dc converter, and fuel cell is connected to the dc bus by a boost converter. The system structure is realized by analogical current loops and digital control (dSPACE) for voltage loops and estimation algorithms. Experimental results with a 500 W PEM fuel cell point out the slow dynamics naturally of fuel cell because of thermodynamic and mechanical operation, and also substantiate that the super-capacitors can improve dynamics and power conditioning for automotive electrical system. (author)

  9. Design of an hybrid source with fuel cell and super-capacitors; Conception d'une source hybride utilisant une pile a combustible et des supercondensateurs

    Energy Technology Data Exchange (ETDEWEB)

    Thounthong, Ph.

    2005-12-15

    The design and testing of a purely super-capacitor energy storage device as auxiliary power source in electrical vehicle applications having a PEM fuel cell as main source are presented. The two control strategies are explained. The control algorithms are that fuel cell is simply operating in almost steady state conditions in order to lessen the mechanical stresses of fuel cell and to ensure a good synchronization between fuel flow and fuel cell current. Super-capacitors are functioning during absence of energy from fuel cell, transient energy delivery or transient energy recovery. The system utilizes two modules of SAFT super-capacitive storage device. This device is connected to a 42 V DC bus by a 2-quadrant dc/dc converter, and fuel cell is connected to the dc bus by a boost converter. The system structure is realized by analogical current loops and digital control (dSPACE) for voltage loops and estimation algorithms. Experimental results with a 500 W PEM fuel cell point out the slow dynamics naturally of fuel cell because of thermodynamic and mechanical operation, and also substantiate that the super-capacitors can improve dynamics and power conditioning for automotive electrical system. (author)

  10. Fourth Tennessee water resources symposium

    International Nuclear Information System (INIS)

    Sale, M.J.; Presley, P.M.

    1991-01-01

    The annual Tennessee Water Resources Symposium was initiated in 1988 as a means to bring together people with common interests in the state's important water-related resources at a technical, professional level. Initially the symposium was sponsored by the American Institute of Hydrology and called the Hydrology Symposium, but the Tennessee Section of the American Water Resources Association (AWRA) has taken on the primary coordination role for the symposium over the last two years and the symposium name was changed in 1990 to water resources to emphasize a more inter-disciplinary theme. This year's symposium carries on the successful tradition of the last three years. Our goal is to promote communication and cooperation among Tennessee's water resources professionals: scientists, engineers, and researchers from federal, state, academic, and private institutions and organizations who have interests and responsibilities for the state's water resources. For these conference proceedings, individual papers are processed separately for the Energy Data Base

  11. Third international symposium on alcohol fuels technology

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-04-01

    At the opening of the Symposium, Dr. Sharrah, Senior Vice President of Continental Oil Company, addressed the attendees, and his remarks are included in this volume. The Symposium was concluded by workshops which addressed specific topics. The topical titles are as follows: alcohol uses; production; environment and safety; and socio-economic. The workshops reflected a growing confidence among the attendees that the alcohols from coal, remote natural gas and biomass do offer alternatives to petroleum fuels. Further, they may, in the long run, prove to be equal or superior to the petroleum fuels when the aspects of performance, environment, health and safety are combined with the renewable aspect of the biomass derived alcohols. Although considerable activity in the production and use of alcohols is now appearing in many parts of the world, the absence of strong, broad scale assessment and support for these fuels by the United States Federal Government was a noted point of concern by the attendees. The environmental consequence of using alcohols continues to be more benign in general than the petroleum based fuels. The exception is the family of aldehydes. Although the aldehydes are easily suppressed by catalysts, it is important to understand their production in the combustion process. Progress is being made in this regard. Of course, the goal is to burn the alcohols so cleanly that catalytic equipment can be eliminated. Separate abstracts are prepared for the Energy Data Base for individual presentations.

  12. Tenth international symposium on environmental biogeochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Ehrlich, H.L.

    1992-01-01

    The primary task of this Symposium on Environmental Biogeochemistry was to examine our current understanding of GLOBAL CHANGE AND THE BIOGEOCHEMISTRY OF RADIATIVE TRACE GASES. The symposium was divided into 12 non-overlapping sessions: Paleoatmospheres and paleoclimates; Global distributions and atmospheric reactions; Poster presentations on the topics of sessions 1, 2, 4, 5, and 7; Terrestrial systems and land use change - 1; Terrestrial and land use change - 11; Fluxes and cycling in aquatic systems; Metals, organics, and depositional environments; Poster presentations on the topics of sessions 6, 9, 10 and 12; Biological Mechanisms of formation and destruction - 1; Biological mechanisms of formation and destruction - 11; High latitude systems; and Global sources, sinks, and feedbacks.

  13. International symposium on marine pollution. Extended synopses

    International Nuclear Information System (INIS)

    1998-01-01

    The marine environment - understanding and protecting for the future were at the forefront of the International Symposium on Marine Pollution convened in Monaco from 5 to 9 October 1998, as one of the major events of the UN International Year of the Oceans. New achievements were reported in identifying the sources of pollution, on the behaviour and fate of contaminants in seawater, biota and sediments, on the use of radioactive and non-radioactive tracers for studies of transport and circulation processes in the world's oceans and seas, on studies of radioactive waste dumping sites and nuclear weapons test sites, on local, regional and global computer modelling of the transport of contaminants and on many other topics in marine pollution. New developments in high sensitivity analytical measurements of contaminants with emphasis on nuclear and isotopic methods were also presented. This document contains extended synopses of 390 oral and poster presentations made at the symposium. Each synopsis was indexed separately

  14. COMPUTING: International symposium

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    Recent Developments in Computing, Processor, and Software Research for High Energy Physics, a four-day international symposium, was held in Guanajuato, Mexico, from 8-11 May, with 112 attendees from nine countries. The symposium was the third in a series of meetings exploring activities in leading-edge computing technology in both processor and software research and their effects on high energy physics. Topics covered included fixed-target on- and off-line reconstruction processors; lattice gauge and general theoretical processors and computing; multiprocessor projects; electron-positron collider on- and offline reconstruction processors; state-of-the-art in university computer science and industry; software research; accelerator processors; and proton-antiproton collider on and off-line reconstruction processors

  15. International RILEM Symposium

    CERN Document Server

    Birgisson, Björn; Frost, David; Wang, Linbing

    2013-01-01

    The micro- and nano-modification of infrastructure materials and the associated multi-scale characterization and simulation has the potential to open up whole new uses and classes of materials, with wide-ranging implications for society. The use of multi-scale characterization and simulation brings the ability to target changes at the very small scale that predictably effect the bulk behavior of the material and thus allowing for the optimization of material behavior and performance.   The International RILEM Symposium on Multi-Scale Modeling and Characterization of Infrastructure Materials (Stockholm, June 10-12, 2013) brought together key researchers from around the world to present their findings and ongoing research in this field in a focused environment with extended discussion times. From asphalt to concrete, from chemistry to mechanics, from nano- to macro-scale: the collection of topics covered by the Symposium represents the width and depth of the currently ongoing efforts of developing more sustain...

  16. Symposium 2 of JENAM

    CERN Document Server

    Pasquali, Anna; Environment and the Formation of Galaxies : 30 years later

    2011-01-01

    The publication of the morphology - density relation by Alan Dressler in 1980 brought into the limelight the role played by environment in the formation and evolution of galaxies. The symposium Environment and the Formation of Galaxies: 30 years later, was organised with the purpose of establishing the environmental impact on the evolution of galaxies and its dependence on look-back time. Special emphasis was placed on the physical mechanisms that are responsible for transforming galaxies once they are accreted by a group or a cluster, including the observable imprint left in the galaxy HI distribution. Other major topics of the symposium were the environmental dependence of galaxy properties at z ≥ 1 and the implementation of environmental effects in cosmological models of galaxy formation and evolution. This book presents the edited proceedings of this stimulating meeting.

  17. Space 2000 Symposium

    Science.gov (United States)

    1999-01-01

    The purpose of the Space 2000 Symposium is to present the creativity and achievements of key figures of the 20th century. It offers a retrospective discussion on space exploration. It considers the future of the enterprise, and the legacy that will be left for future generations. The symposium includes panel discussions, smaller session meetings with some panelists, exhibits, and displays. The first session entitled "From Science Fiction to Science Facts" commences after a brief overview of the symposium. The panel discussions include talks on space exploration over many decades, and the missions of the millennium to search for life on Mars. The second session, "Risks and Rewards of Human Space Exploration," focuses on the training and health risks that astronauts face on their exploratory mission to space. Session three, "Messages and Messengers Informing and Inspire Space Exploration and the Public," focuses on the use of TV medium by educators and actors to inform and inspire a wide variety of audiences with adventures of space exploration. Session four, "The Legacy of Carl Sagan," discusses the influences made by Sagan to scientific research and the general public. In session five, "Space Exploration for a new Generation," two student speakers and the NASA Administrator Daniel S. Goldin address the group. Session six, "Destiny or Delusion? -- Humankind's Place in the Cosmos," ends the symposium with issues of space exploration and some thought provoking questions. Some of these issues and questions are: what will be the societal implications if we discover the origin of the universe, stars, or life; what will be the impact if scientists find clear evidence of life outside the domains of the Earth; should there be limits to what humans can or should learn; and what visionary steps should space-faring people take now for future generations.

  18. SYMPOSIUM: Rare decays

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1989-04-15

    Late last year, a symposium entitled 'Rare Decays' attracted 115 participants to a hotel in Vancouver, Canada. These participants were particle physicists interested in checking conventional selection rules to look for clues of possible new behaviour outside today's accepted 'Standard Model'. For physicists, 'rare decays' include processes that have so far not been seen, explicitly forbidden by the rules of the Standard Model, or processes highly suppressed because the decay is dominated by an easier route, or includes processes resulting from multiple transitions.

  19. 1979 DOE statistical symposium

    Energy Technology Data Exchange (ETDEWEB)

    Gardiner, D.A.; Truett T. (comps. and eds.)

    1980-09-01

    The 1979 DOE Statistical Symposium was the fifth in the series of annual symposia designed to bring together statisticians and other interested parties who are actively engaged in helping to solve the nation's energy problems. The program included presentations of technical papers centered around exploration and disposal of nuclear fuel, general energy-related topics, and health-related issues, and workshops on model evaluation, risk analysis, analysis of large data sets, and resource estimation.

  20. 1979 DOE statistical symposium

    International Nuclear Information System (INIS)

    Gardiner, D.A.; Truett, T.

    1980-09-01

    The 1979 DOE Statistical Symposium was the fifth in the series of annual symposia designed to bring together statisticians and other interested parties who are actively engaged in helping to solve the nation's energy problems. The program included presentations of technical papers centered around exploration and disposal of nuclear fuel, general energy-related topics, and health-related issues, and workshops on model evaluation, risk analysis, analysis of large data sets, and resource estimation

  1. XV ESLAB Symposium

    CERN Document Server

    1981-01-01

    The 15th ESLAB symposium was held at the end of June 1981 in Amsterdam with the topic being X-ray astronomy. The aim of this symposium was to bring together the international astrophysical community in order to 1. review the present state of X-ray astronomy in the light of new observations gathered in recent missions and to review data on interesting objects in correlated wavelen8th regions; 2. discuss theoretical models describing the phenomena observed; 3. present ESA's European X-ray Observatory Satellite (EXOSAT) and to discuss future X-ray missions and their associated instrumenta­ tion. These topics seemed to be so interesting for the scientific community that more than 120 contributions were submitted. Of these, 94 were finally accepted and approximately 200 participants attended the 5-day meeting. The symposium was organised in nine sessions covering the whole field. Every main topic was introduced by a review lecture covering the state­ of-the-art. The aim of the meeting was to assess the impact of...

  2. LHC Nobel Symposium Proceedings

    Science.gov (United States)

    Ekelöf, Tord

    2013-12-01

    In the summer of 2012, a great discovery emerged at the Large Hadron Collider (LHC) at CERN in Geneva. A plethora of new precision data had already by then been collected by the ATLAS and CMS experiments at LHC, providing further extensive support for the validity of the Standard Model of particle physics. But what now appeared was the first evidence for what was not only the last unverified prediction of the Standard Model, but also perhaps the most decisive one: the prediction made already in 1964 of a unique scalar boson required by the theory of François Englert and Peter Higgs on how fundamental particles acquire mass. At that moment in 2012, it seemed particularly appropriate to start planning a gathering of world experts in particle physics to take stock of the situation and try to answer the challenging question: what next? By May 2013, when the LHC Nobel Symposium was held at the Krusenberg Mansion outside Uppsala in Sweden, the first signs of a great discovery had already turned into fully convincing experimental evidence for the existence of a scalar boson of mass about 125 GeV, having properties compatible with the 50-year-old prediction. And in October 2013, the evidence was deemed so convincing that the Swedish Royal Academy of Sciences awarded the Nobel Prize in Physics to Englert and Higgs for their pioneering work. At the same time the search at the LHC for other particles, beyond those predicted by the Standard Model, with heavier masses up to—and in some cases beyond—1 TeV, had provided no positive result. The triumph of the Standard Model seems resounding, in particular because the mass of the discovered scalar boson is such that, when identified with the Higgs boson, the Standard Model is able to provide predictions at energies as high as the Planck mass, although at the price of accepting that the vacuum would be metastable. However, even if there were some feelings of triumph, the ambience at the LHC Nobel Symposium was more one of

  3. Symposium on isotope production and applications

    International Nuclear Information System (INIS)

    1981-01-01

    This report contains the papers delivered at the symposium on isotope production and applications, held at Pelindaba, Pretoria, South Africa. The following topics were discussed: facilities for the production of radioisotopes at Pelindaba; the role of the chemist in the development and production of radioisotopic preparations; quality control of radioisotopic products; applications of radioisotopes in medicine; concepts and current status of nuclear imaging; industrial and research applications of radioisotopic tracers and radioisotopic radiation sources; radiation processing using intense radioisotopic radiation sources; a review of current and future radioisotope production activities at the Council for Scientific and Industrial Research

  4. 7th International Fermi Symposium

    Science.gov (United States)

    2017-10-01

    The two Fermi instruments have been surveying the high-energy sky since August 2008. The Large Area Telescope (LAT) has discovered more than three thousand gamma-ray sources and many new source classes, bringing the importance of gamma-ray astrophysics to an ever-broadening community. The LAT catalog includes supernova remnants, pulsar wind nebulae, pulsars, binary systems, novae, several classes of active galaxies, starburst galaxies, normal galaxies, and a large number of unidentified sources. Continuous monitoring of the high-energy gamma-ray sky has uncovered numerous outbursts from a wide range of transients. Fermi LAT's study of diffuse gamma-ray emission in our Galaxy revealed giant bubbles, as well as an excess of gamma-rays from the Galactic center region, both observations have become exciting puzzles for the astrophysics community. The direct measurement of a harder-than- expected cosmic-ray electron spectrum may imply the presence of nearby cosmic-ray accelerators. LAT data have provided stringent constraints on new phenomena such as supersymmetric dark-matter annihilations as well as tests of fundamental physics. The full reprocessing of the entire mission dataset with Pass 8 includes improved event reconstruction, a wider energy range, better energy measurements, and significantly increased effective area, all them boosting the discovery potential and the ability to do precision observations with LAT. The Gamma-ray Burst Monitor (GBM) continues to be a prolific detector of gamma-ray transients: magnetars, solar flares, terrestrial gamma-ray flashes and gamma-ray bursts at keV to MeV energies, complementing the higher energy LAT observations of those sources in addition to providing valuable science return in their own right. All gamma-ray data are made immediately available at the Fermi Science Support Center (http://fermi.gsfc.nasa.gov/ssc). These publicly available data and Fermi analysis tools have enabled a large number of important studies. We

  5. Advanced Combustion

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, Gordon R. [NETL

    2013-03-11

    The activity reported in this presentation is to provide the mechanical and physical property information needed to allow rational design, development and/or choice of alloys, manufacturing approaches, and environmental exposure and component life models to enable oxy-fuel combustion boilers to operate at Ultra-Supercritical (up to 650{degrees}C & between 22-30 MPa) and/or Advanced Ultra-Supercritical conditions (760{degrees}C & 35 MPa).

  6. Welcome and introduction to symposium

    OpenAIRE

    humanities, Symposium on Information and technology in the arts and; McLaughlin, Jeremy Lee; Matusiak, Krystyna; Hirsh, Sandra

    2015-01-01

    Welcome and introduction slides used for presentation at the Virtual Symposium on Information and Technology in the Arts and Humanities, held April 22 and 23, 2015. The Symposium was co-sponsored by the ASIS&T (Association for Information Science and Technology) Special Interest Group for Arts and Humanities (SIG AH) and the Special Interest Group for Visualization, Images, and Sound (SIG VIS).

  7. EMISIONES AL AIRE DE LA COMBUSTION DE LLANTAS USADAS (SPANISH VERSION)

    Science.gov (United States)

    The report discusses air emissions from two types of scrap tire combustion: uncontrolled and controlled. Uncontrolled sources are open tire fires, which produce many unhealthful products of incomplete combustion and release them directly into the atmosphere. Controlled combustion...

  8. 77 FR 60341 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

    Science.gov (United States)

    2012-10-03

    ... National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines; New Source Performance Standards for Stationary Internal Combustion Engines AGENCY: Environmental Protection... Pollutants for Stationary Reciprocating Internal Combustion Engines to solicit comment on specific issues...

  9. Technology and use of lignite. Proceedings of the tenth biennial lignite symposium

    Energy Technology Data Exchange (ETDEWEB)

    Kube, W. R.; Gronhovd, G. H. [comps.

    1979-01-01

    The symposium on the technology and use of lignite was sponsored by the US Department of Energy and the University of North Dakota, and held at Grand Forks, North Dakota, May 30-31, 1979. Twenty-one papers from the proceedings of this tenth biennial lignite symposium have been entered into EDB and ERA and three also into EAPA. The papers discuss lignite deposits in the USA, mining plans, gasification and in-situ gasification, and combustion in fossil-fuel power plants. (LTN)

  10. Evaluation of the health impact of aerosols emitted from different combustion sources: Comprehensive characterization of the aerosol physicochemical properties as well as the molecular biological and toxicological effects of the aerosols on human lung cells and macrophages.

    Science.gov (United States)

    Zimmermann, R.; Dittmar, G.; Kanashova, T.; Buters, J.; Öder, S.; Paur, H. R.; Mülhopt, S.; Dilger, M.; Weiss, C.; Harndorf, H.; Stengel, B.; Hirvonen, M. R.; Jokiniemi, J.; Hiller, K.; Sapcariu, S.; Sippula, O.; Streibel, T.; Karg, E.; Weggler, B.; Schnelle-Kreis, J.; Lintelmann, J.; Sklorz, M.; Orasche, J.; Müller, L.; Passig, J.; Gröger, T.; Jalava, P. I.; Happo, M.; Uski, O.

    2017-12-01

    . Detailed analyses suggest a large difference in relative toxicity for different combustion sources. Recently the cell experiments were successively evaluated and verified by animal exposure tests. This is important to develop a reliable animal-test free-monitoring method for aerosol-induced health effects.

  11. Combustion strategy : United Kingdom

    Energy Technology Data Exchange (ETDEWEB)

    Greenhalgh, D. [Heriot-Watt Univ., Edingburgh, Scotland (United Kingdom). School of Engineering and Physical Sciences

    2009-07-01

    The United Kingdom's combustion strategy was briefly presented. Government funding sources for universities were listed. The United Kingdom Research Councils that were listed included the Arts and Humanities Research Council (AHRC) and the Biotechnology and Biological Sciences Research Council (BBSRC); the Engineering and Physical Sciences Research Council (EPSRC); the Economic and Social Research Council; the Medical Research Council; the Natural Environment Research Council; and the Science and Technology Facilities Council. The EPSRC supported 65 grants worth 30.5 million pounds. The combustion industry was noted to be dominated by three main players of which one was by far the largest. The 3 key players were Rolls-Royce; Jaguar Land Rover; and Doosan Babcock. Industry and government involvement was also discussed for the BIS Technology Strategy Board, strategy technology areas, and strategy application areas.

  12. SYMPOSIUM: Rare decays

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    Late last year, a symposium entitled 'Rare Decays' attracted 115 participants to a hotel in Vancouver, Canada. These participants were particle physicists interested in checking conventional selection rules to look for clues of possible new behaviour outside today's accepted 'Standard Model'. For physicists, 'rare decays' include processes that have so far not been seen, explicitly forbidden by the rules of the Standard Model, or processes highly suppressed because the decay is dominated by an easier route, or includes processes resulting from multiple transitions

  13. Reaching the hip-hop generation: Final (symposium proceedings) report

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The goal of this final (closing) report is to capture the flavor of the symposium held March 1 and 2, 1993 in New York City convened by Motivational Educational Entertainment, Inc. (MEE), a black-owned communications research, consulting, and video production company based in Philadelphia, Pennsylvania. The mission of MEE is to understand, reach, and positively affect inner-city youth. Traditional communication approaches from mainstream sources to at-risk youth often don`t account for the unique way youth communicate among themselves and how they relate to the media. This understanding, however, is crucial. To understand youth communication, the people who create and send both entertaining and educational messages to urban youth must be brought into the dialogue. The meeting in New York was intended to provide an important opportunity for senders to meet and evaluate the appropriateness and effectiveness of their messages. In addition, the MEE symposium provided a forum for the continuing public debate about what needs to be done to reach today`s urban teens. Included in this document is a description of symposium goals/objectives, symposium activities, the reaction to and analysis of the symposium, recommendations for future MEE courses of action, and an appendix containing copies of press articles.

  14. Pt Combustion Catalysts Prepared from W/O Microemulsions

    Czech Academy of Sciences Publication Activity Database

    Rymeš, Jan; Ehret, G.; Hilaire, L.; Jirátová, Květa

    2002-01-01

    Roč. 143, - (2002), s. 121-129 ISSN 0167-2991. [International Symposium Scientific Bases for the Preparation of Heterogeneous Catalysts /8./. Louvain-la-Neuve, 09.09.2002-12.09.2002] R&D Projects: GA AV ČR IAA4072904 Keywords : combustion catalysts * microemulsion s Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 3.468, year: 2002

  15. A guidance manual for estimating greenhouse gas emissions from fuel combustion and process-related sources for primary base metals smelting and refining

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-03-01

    This technical guidance manual is a useful resource for helping the metals industry compile inventories of its greenhouse gas (GHG) emissions. The guidance is consistent with Canada's national GHG accounting methodologies. It provides information to smelters and refiners of base metals on how to estimate their GHG emissions from fuel combustion and specific process-related activities. The base metals group in this manual included copper, nickel, lead, zinc, and cobalt. Fuel combustion includes all stationary combustion activities for generating heat or work, and includes waste incineration if the waste heat is used for energy. It also includes mobile fuel combustion activities such as on-site transportation of raw materials from one process to another. Guidance is provided for carbon dioxide (CO{sub 2}), methane (CH{sub 4}) and nitrous oxide (N{sub 2}O). Process-related activities include specific industrial processes that contribute to GHG emissions. For base metal smelting, this includes CO{sub 2} emissions from use of carbonate reagents, use of reducing agents, electrode consumption, and hydrofluorocarbons (HFC) emissions from use in refrigeration systems. This document also included sections on quality assurance; aspects of uncertainty assessment; verification; and, reporting of emissions information. refs., tabs., figs.

  16. 3rd symposium on tires and chassis; 3. Symposium Reifen und Fahrwerk

    Energy Technology Data Exchange (ETDEWEB)

    Geringer, B.; Stumpf, H. (comps.)

    2005-07-01

    The present volume contains the talks, which were held at the 3rd symposium on ''Tires and chassis'' at the Institute for combustion machines at the Technical University Vienna on 26th September 2005 in cooperation with UAMTTC and Semperit Reifen Ges.m.H. Apart from technical improvements on chassis, tires and carriageway the overall perspective will get more important in the future, which also includes the driver, the neighbour, the environment and the traffic policy. Due to an increasing number of international participants, discussions can be expected, which will take into consideration extraordinary and manifold perspectives. The third symposium on ''Tires and chassis'' discusses the following developments, of which some are evolutionary. (a) Tire engineering; environmental aspects of tires, roll resistance of tires, driving comfort of tires, winter tires for passenger vehicles and trucks. (b) vehicle engineering, engineering of a race car chassis by means of telemetric measuring data acquisition; simulation of steering wheel vibrations on a complete vehicle test stand. (c) Vehicle steering; chassis of tracklaying vehicles; automatic air pressure control. (orig.)

  17. Army symposium: Electrical energy engineering today; Wehrtechnisches Symposium: Moderne elektrische Energietechnik

    Energy Technology Data Exchange (ETDEWEB)

    Busse, H. (ed.) [Bundesakademie fuer Wehrverwaltung und Wehrtechnik, Mannheim (Germany). Fachgebiet Elektrotechnik und Elektroenergiewesen

    2000-05-01

    This symposium was held in Mannheim on May 20/21, 2000. All aspects of energy engineering were discussed, including electrochemical energy sources like accumulator batteries and fuel cells. The proceedings volume contains 26 papers which reflect the state of the art and current trends in electrical energy engineering in the German army. [German] Das Wehrtechnische Symposium 'Moderne elektrische Energietechnik' wurde von der Lehrabteilung Wehrtechnik der Bundesakademie fuer Wehrverwaltung und Wehrtechnik in Mannheim in der Zeit vom 20.05.-21.05.2000 durchgefuehrt. Das Programm enthaelt die aktuellen Themen der elektrischen Energietechnik. Die elektroschemischen Energiequellen (Batterien und Brennstoffzellen) wurden in das Programm integriert. Dadurch konnte das gesamte Spektrum der Energietechnik vielschichtig dargestellt und in der Diskussion unter z.T. sehr verschiedenen Gesichtspunkten beleuchtet werden. Die im vorliegenden Tagungsband abgedruckten 26 Skripte wurden weder gekuerzt noch ergaenzt. Sie zeigen insgesamt den aktuellen Stand und die erfolgversprechenden Entwicklungstendenzen der elektrischen Energietechnik in der Bundeswehr auf. (orig.)

  18. Evaluation of the health impact of nanoparticles emitted from combustion sources: Comprehensive characterization of the physicochemical properties of nanoparticle emissions from wood combustion compliances, car- and ship diesel-engines as well as investigation of their toxicological effects on human lung cells and macrophages.

    Science.gov (United States)

    Zimmermann, R.; Dittmar, G.; Kanashova, T.; Buters, J.; Öder, S.; Paur, H. R.; Mülhopt, S.; Dilger, M.; Weiss, C.; Harndorf, H.; Stengel, B.; Hirvonen, M. R.; Jokiniemi, J.; Hiller, K.; Sapcariu, S.; Sippula, O.; Streibel, T.; Karg, E.; Weggler, B.; Schnelle-Kreis, J.; Lintelmann, J.; Sklorz, M.; Orasche, J.; Müller, L.; Passig, J.; Gröger, T.; BéruBé, K.; Krebs, T.

    2016-12-01

    with murine RAW macrophages. Detailed analyses of the activated cellular response pathways, such as pro-inflammatory responses, xenobiotic metabolism, phagocytosis and oxidative stress were performed. The data is suggesting a large difference in relative toxicity for different combustion sources.

  19. 36th International Symposium on Combustion (ISOC2016)

    Science.gov (United States)

    2016-12-01

    droplet evaporation using 1D global rainbow refractometry J. Promvongsa, P. Vallikul, B. Fungtammasan, A. Garo, G. Grehan, S. Saengkaew 5F07...aforementioned optical diagnostics, Global Rainbow Refractometry Technique (GRT) has been used as a novelty to measure droplet temperature in the...RAINBOW REFRACTOMETRY Jantarat Promvongsa1,2, Pumyos Vallikul2, Bundit Fungtammasan2, Annie Garo1, Gerard Grehan1, Sawitree Saengkaew1 1CORIA-UMR6614

  20. 5th symposium on neutron dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Spurny, F

    1985-03-01

    The symposium was held in Neuherberg near Munich on September 17-20, 1984 and was attended by 200 specialists from 20 coutries. The participants discussed the following areas of neutron dosimetry: basic concept and analysis of irradiation, basic data, proportional counters in radiation protection, detector response and spectrometry, enviromental monitoring, radiobiology and biophysical models, analysis of neutron fields, thermoluminescent detectors, personnel monitoring, calibration, measurement in the environment of /sup 252/Cf sources, analysis of fields and detector response, standardization dosimetry, ionization chambers, planning of therapeutical irradiation study of depth dose distribution, facilities for neutron therapy and international comparison. (E.S.).

  1. 5th symposium on neutron dosimetry

    International Nuclear Information System (INIS)

    Spurny, F.

    1985-01-01

    The symposium was held in Neuherberg near Munich on September 17-20, 1984 and was attended by 200 specialists from 20 coutries. The participants discussed the following areas of neutron dosimetry: basic concept and analysis of irradiation, basic data, proportional counters in radiation protection, detector response and spectrometry, enviromental monitoring, radiobiology and biophysical models, analysis of neutron fields, thermoluminescent detectors, personnel monitoring, calibration, measurement in the environment of 252 Cf sources, analysis of fields and detector response, standardization dosimetry, ionization chambers, planning of therapeutical irradiation study of depth dose distribution, facilities for neutron therapy and international comparison. (E.S.)

  2. NIC symposium 2010. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Muenster, Gernot [Muenster Univ. (Germany). Inst. fuer Theoretische Physik 1; Wolf, Dietrich [Duisburg-Essen Univ., Duisburg (Germany). Fakultaet fuer Physik; Kremer, Manfred (eds.) [Forschungszentrum Juelich GmbH (DE). Juelich Supercomputing Centre (JSC)

    2012-06-21

    The fifth NIC-Symposium gave an overview of the activities of the John von Neumann Institute for Computing (NIC) and of the results obtained in the last two years by research groups supported by the NIC. The large recent progress in supercomputing is highlighted by the fact that the newly installed Blue Gene/P system in Juelich - with a peak performance of 1 Petaflop/s - currently ranks number four in the TOP500 list. This development opens new dimensions in simulation science for researchers in Germany and Europe. NIC - a joint foundation of Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) and Gesellschaft fuer Schwerionenforschung (GSI) - supports with its members' supercomputer facilities about 130 research groups at universities and national labs working on computer simulations in various fields of science. Fifteen invited lectures covered selected topics in the following fields: Astrophysics Biophysics Chemistry Elementary Particle Physics Condensed Matter Materials Science Soft Matter Science Environmental Research Hydrodynamics and turbulence Plasma Physics Computer Science The talks are intended to inform a broad audience of scientists and the interested public about the research activities at NIC. The proceedings of the symposium cover projects that have been supported by the IBM supercomputers JUMP and IBM Blue Gene/P in Juelich and the APE topical computer at DESY-Zeuthen in an even wider range than the lectures.

  3. NIC symposium 2010. Proceedings

    International Nuclear Information System (INIS)

    Muenster, Gernot

    2012-01-01

    The fifth NIC-Symposium gave an overview of the activities of the John von Neumann Institute for Computing (NIC) and of the results obtained in the last two years by research groups supported by the NIC. The large recent progress in supercomputing is highlighted by the fact that the newly installed Blue Gene/P system in Juelich - with a peak performance of 1 Petaflop/s - currently ranks number four in the TOP500 list. This development opens new dimensions in simulation science for researchers in Germany and Europe. NIC - a joint foundation of Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) and Gesellschaft fuer Schwerionenforschung (GSI) - supports with its members' supercomputer facilities about 130 research groups at universities and national labs working on computer simulations in various fields of science. Fifteen invited lectures covered selected topics in the following fields: Astrophysics Biophysics Chemistry Elementary Particle Physics Condensed Matter Materials Science Soft Matter Science Environmental Research Hydrodynamics and turbulence Plasma Physics Computer Science The talks are intended to inform a broad audience of scientists and the interested public about the research activities at NIC. The proceedings of the symposium cover projects that have been supported by the IBM supercomputers JUMP and IBM Blue Gene/P in Juelich and the APE topical computer at DESY-Zeuthen in an even wider range than the lectures.

  4. NIC symposium 2010. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Muenster, Gernot [Muenster Univ. (Germany). Inst. fuer Theoretische Physik 1; Wolf, Dietrich [Duisburg-Essen Univ., Duisburg (Germany). Fakultaet fuer Physik; Kremer, Manfred [Forschungszentrum Juelich GmbH (DE). Juelich Supercomputing Centre (JSC)

    2012-06-21

    The fifth NIC-Symposium gave an overview of the activities of the John von Neumann Institute for Computing (NIC) and of the results obtained in the last two years by research groups supported by the NIC. The large recent progress in supercomputing is highlighted by the fact that the newly installed Blue Gene/P system in Juelich - with a peak performance of 1 Petaflop/s - currently ranks number four in the TOP500 list. This development opens new dimensions in simulation science for researchers in Germany and Europe. NIC - a joint foundation of Forschungszentrum Juelich, Deutsches Elektronen-Synchrotron (DESY) and Gesellschaft fuer Schwerionenforschung (GSI) - supports with its members' supercomputer facilities about 130 research groups at universities and national labs working on computer simulations in various fields of science. Fifteen invited lectures covered selected topics in the following fields: Astrophysics Biophysics Chemistry Elementary Particle Physics Condensed Matter Materials Science Soft Matter Science Environmental Research Hydrodynamics and turbulence Plasma Physics Computer Science The talks are intended to inform a broad audience of scientists and the interested public about the research activities at NIC. The proceedings of the symposium cover projects that have been supported by the IBM supercomputers JUMP and IBM Blue Gene/P in Juelich and the APE topical computer at DESY-Zeuthen in an even wider range than the lectures.

  5. International Evoked Potentials Symposium

    CERN Document Server

    1980-01-01

    The past decade has seen great progress in the measurement of evoked potentials in man; a steady increase in our understanding of their charac­ teristics, their origins and their usefulness; and a growing application in the field of clinical diagnosis. The topic is a truly multidisciplinary one. Important research contributions have been made by workers of many different backgrounds and clinical applications span the specialities. This book represents a revised and updated version of the work originally presented at the international evoked potential symposium held in Nottingham 4-6 1978. The Nottingham Symposium provided a forum for a state-of-the-art discussion amongst workers from many different disciplines and from many different countries. For each major topic in the field an expert review set the scene for discussion of current research presentations. This format is retained in the book: the chapters in Part A provide the context in which the research presented in Part B is set. The task of selecting m...

  6. Symposium Gyro Technology 1997

    Energy Technology Data Exchange (ETDEWEB)

    Sorg, H [ed.; Stuttgart Univ. (Germany). Inst. A fuer Mechanik

    1997-10-01

    This volume includes the twenty papers which were presented at the Symposium Gyro Technology 1997. The subjects that have been treated during the symposium were as follows: Performance and design of silicon micromachined gyro; improved rate gyroscope designs designated for fabrication by modern deep silicon etching; micromechanical vibratory rate gyroscopes fabricated in conventional CMOS; error modelling of silicon angular rate sensor; a capacitive accelerometer as an example for surface micromachined inertial sensors; initial production results of a new family of fiber optic gyroscopes; dual-axis multiplexed open loop fiber optic gyroscope; flattely supported vibratory gyro-sensor using a Trident-type tuning fork resonator; innovative mechanizations to optimize inertial sensors for high or low rate operations; design of a planar vibratory gyroscope using electrostatic actuation and electromanetic detection; fiber optic gyro based land navigation system; FOG AHRS and AHRS/GPS navigation system: the low cost solution; GPS/GLONASS/INS-navigation (GLOGINAV); small-sized integrated system of the sea mobile objects attitude and navigation; concepts for hybrid positioning; preliminary results from a large ring laser gyroscope for fundamental physics and geophysics; a `sense of balance` - AHRS with low-cost vibrating-gyroscopes for medical diagnostics; application of strapdown inertial systems of orientation and navigation in intrapipe moving diagnostic apparatus; investigation of a digital readout system for laser gyro; the use of angular rate multiple integrals as input signals for strapdown attitude algorithms. (AKF)

  7. Proceedings of the second US Department of Energy environmental control symposium. Volume 2. Nuclear energy, conservation, and solar energy

    International Nuclear Information System (INIS)

    1980-06-01

    These proceedings document the presentations given at the Second Environmental Control Symposium. Symposium presentations highlighted environmental control activities which span the entire DOE. Volume II contains papers relating to: environmental control aspects of nuclear energy use and development; nuclear waste management; renewable energy sources; transportation and building conservation (fuel economy, gasohol, building standards, and industry); and geothermal energy, power transmission, and energy storage

  8. Proceedings of the second US Department of Energy environmental control symposium. Volume 2. Nuclear energy, conservation, and solar energy

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-06-01

    These proceedings document the presentations given at the Second Environmental Control Symposium. Symposium presentations highlighted environmental control activities which span the entire DOE. Volume II contains papers relating to: environmental control aspects of nuclear energy use and development; nuclear waste management; renewable energy sources; transportation and building conservation (fuel economy, gasohol, building standards, and industry); and geothermal energy, power transmission, and energy storage. (DMC)

  9. High Combustion Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — At NETL's High-Pressure Combustion Research Facility in Morgantown, WV, researchers can investigate new high-pressure, high-temperature hydrogen turbine combustion...

  10. Combustion Research Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Combustion Research Laboratory facilitates the development of new combustion systems or improves the operation of existing systems to meet the Army's mission for...

  11. Proceedings of the 2009 IAGT symposium : innovative and reliable energy solutions

    International Nuclear Information System (INIS)

    2009-01-01

    This symposium hosted by the Industrial Application of Gas Turbines (IAGT) Committee, provided a forum to review new developments in the industrial application of gas turbines in Canada. The sectors of industry involved at the symposium included research and development, application, performance, operation, maintenance and user experience. Both technical presentations and expert panel discussions focused on the challenging issues facing industrial gas turbine operations in power generation as well as oil and gas applications. Operational experiences with gas turbines were highlighted with reference to mechanical efficiency, power performance, maintenance and reliability as well as their ability to reduce emissions to the environment. The sessions were entitled: fuel combustion and emissions; cogeneration, gasification and power applications; reliability and applications in the oil sands. The symposium featured 21 presentations, of which 18 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  12. Combustion chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Brown, N.J. [Lawrence Berkeley Laboratory, CA (United States)

    1993-12-01

    This research is concerned with the development and use of sensitivity analysis tools to probe the response of dependent variables to model input variables. Sensitivity analysis is important at all levels of combustion modeling. This group`s research continues to be focused on elucidating the interrelationship between features in the underlying potential energy surface (obtained from ab initio quantum chemistry calculations) and their responses in the quantum dynamics, e.g., reactive transition probabilities, cross sections, and thermal rate coefficients. The goals of this research are: (i) to provide feedback information to quantum chemists in their potential surface refinement efforts, and (ii) to gain a better understanding of how various regions in the potential influence the dynamics. These investigations are carried out with the methodology of quantum functional sensitivity analysis (QFSA).

  13. Research symposium proceedings. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-12-31

    THE research symposium was organized to present the cutting edge research for PET by individuals from leading institutions throughout the world. The Institute for Clinical PET (ICP) has focused its annual meeting on the clinical applications of PET.

  14. International symposium on NMR spectroscopy

    International Nuclear Information System (INIS)

    The publication consists of 32 papers and presentations from the field of NMR spectroscopy applications submitted to the International Symposium on NMR Spectroscopy held at Smolenice between 29 Sep and 3 Oct, 1980. (B.S.)

  15. Proceedings Forest & Field Fuels Symposium

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-07-01

    The purpose of the symposium is to examine two specific renewable resources, forest and field fuels, to pinpoint areas where funding of RD&D would be effective in expanding their marketability and use as substitutes for imported oil.

  16. Third Symposium on Macrocyclic Compounds

    International Nuclear Information System (INIS)

    1979-01-01

    At the Third Symposium on Macrocyclic Compounds there were sessions on facilitated transport, analytical applications, organic synthesis and reactions, phase transfer catalysis, and metal complexation. Abstracts of the individual presentations are included

  17. VIII international electric vehicle symposium

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    The proceedings from the symposium are presented. Major topics discussed include: battery technology, powertrains; hybrid vehicles, marketing and economics, propulsion, and electric vehicle design and performance. Each paper has been separately indexed for inclusion in the Energy Data Base.

  18. Fourth symposium on macrocyclic compounds

    International Nuclear Information System (INIS)

    Christensen, J.J.; Izatt, R.M.

    1980-01-01

    Both theoretical and experimental aspects of the properties and behavior of synthetic and naturally occurring macrocyclic compounds are covered in this symposium. This document contains abstracts of the papers

  19. ACS Symposium on Molecular Tribology

    National Research Council Canada - National Science Library

    Gellman, Andrew

    2002-01-01

    .... The aspects of tribology covered by the symposium were quite broad but included a number of areas of importance to Air Force technologies including vapor phase lubrication, lubrication of MEMS...

  20. 10th Schaeffler Symposium

    CERN Document Server

    2014-01-01

    Every four years, Schaeffler provides an insight into its latest developments and technologies from the engine, transmission and chassis as well as hybridization and electric mobility sectors. In 2014 the Schaeffler Symposium with the motto “Solving the Powertrain Puzzle” took place from 3th to 4th of April in Baden-Baden. Mobility for tomorrow is the central theme of this proceeding. The authors are discussing the different requirements, which are placed on mobility in different regions of the world. In addition to the company's work in research and development, a comprehensive in-house mobility study also provides a reliable basis for the discussion. The authors are convinced that there will be a paradigm shift in the automotive industry. Issues such as increasing efficiency and advancing electrification of the powertrain, automatic and semi-automatic driving, as well as integration in information networks will define the automotive future. In addition, the variety of solutions available worldwide will ...

  1. NATO Telecommunications Symposium

    CERN Document Server

    Lucas, William; Conrath, David

    1978-01-01

    This book contains the proceedings of the first international symposium devoted to research on the evaluation and planning of new person-to-person telecommunication systems. It was sponsored by NATO's Special Programme Panel on Systems Science and took place, in September 1977, at the University of Bergamo in the north of Italy. Telecommunication systems which provide for communication be­ tween people, rather than computers or other instruments, are of two kinds. There are mass communication systems (broadcast radio and television) and interpersonal systems (for example, the telephone and Telex) which join together individuals or small groups. Here we have included in the interpersonal category certain systems for re­ trieving information from computers, essentially those systems in which the role of the computer 1s primarily to act as a store and to identify that information which best fits a user's request. (This excludes management information systems in which the computer performs important transformat...

  2. Objectives of the symposium

    International Nuclear Information System (INIS)

    Genter, N.E.

    1996-01-01

    The objective of this symposium was to discuss the sorts of evidence of molecular alterations in DNA which can be used to study causation of the stochastic effects of importance in radiation protection. Specifically, the aim was to address the following: what sort of indications might show whether a cancer was caused by radiation; whether there is a radiogenic signature to distinguish damage caused by ionizing radiation; whether bio-markers might be available for susceptibility, for exposure, for biological consequences. Despite a number of epidemiological studies (referred to), there is no clear, credible, defensible answer as to whether low-level radiation increases the risk of cancer. A new ethical question is, what rules should be in place for identifying and protecting genetically sensitive individuals. 1 tab

  3. Design Modelling Symposium 2015

    CERN Document Server

    Tamke, Martin; Gengnagel, Christoph; Faircloth, Billie; Scheurer, Fabian

    2015-01-01

    This book reflects and expands on the current trend in the building industry to understand, simulate and ultimately design buildings by taking into consideration the interlinked elements and forces that act on them. This approach overcomes the traditional, exclusive focus on building tasks, while posing new challenges in all areas of the industry from material and structural to the urban scale. Contributions from invited experts, papers and case studies provide the reader with a comprehensive overview of the field, as well as perspectives from related disciplines, such as computer science. The chapter authors were invited speakers at the 5th Symposium "Modelling Behaviour", which took place at the CITA in Copenhagen in September 2015.

  4. 2nd Abel Symposium

    CERN Document Server

    Nunno, Giulia; Lindstrøm, Tom; Øksendal, Bernt; Zhang, Tusheng

    2007-01-01

    Kiyosi Ito, the founder of stochastic calculus, is one of the few central figures of the twentieth century mathematics who reshaped the mathematical world. Today stochastic calculus is a central research field with applications in several other mathematical disciplines, for example physics, engineering, biology, economics and finance. The Abel Symposium 2005 was organized as a tribute to the work of Kiyosi Ito on the occasion of his 90th birthday. Distinguished researchers from all over the world were invited to present the newest developments within the exciting and fast growing field of stochastic analysis. The present volume combines both papers from the invited speakers and contributions by the presenting lecturers. A special feature is the Memoirs that Kiyoshi Ito wrote for this occasion. These are valuable pages for both young and established researchers in the field.

  5. SYMPOSIUM: Multiparticle 82

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    The thirteenth symposium in the successful series on multiparticle dynamics was held from 6-11 June in the picturesque North Holland village of Volendam. While originally confined to hadron-hadron interactions, multiparticle dynamics is now of interest in all types of particle collision. Results on proton-antiproton collisions at CERN, both in the SPS and the ISR, are a talking point wherever particle physicists meet, and Volendam was no exception. Also prominent at Volendam were ultrarelativistic effects in nucleus-nucleus collisions. However the main aim of this year's meeting was to review the common features of hadrons produced in different types of collision (lepton-lepton, lepton-hadron and hadron-hadron)

  6. Renewable Energy Symposium

    International Nuclear Information System (INIS)

    2016-01-01

    Representatives of state universities, public institutions and Costa Rican private sector, and American experts have exposed projects or experiences about the use and generation of renewable energy in different fields. The thematics presented have been about: development of smart grids and design of electrical energy production systems that allow money saving and reducing emissions to the environment; studies on the use of non-traditional plants and agricultural waste; sustainable energy model in the process of coffee production; experiments from biomass for the fabrication of biodiesel, biogas production and storage; and the use of non-conventional energy. Researches were presented at the Renewable Energy Symposium, organized by the Centro de Investigacion en Estructuras Microscopicas and support of the Vicerrectoria de Investigacion, both from the Universidad de Costa Rica [es

  7. 3rd Abel Symposium

    CERN Document Server

    Owren, Brynjulf

    2008-01-01

    The 2006 Abel symposium is focusing on contemporary research involving interaction between computer science, computational science and mathematics. In recent years, computation has been affecting pure mathematics in fundamental ways. Conversely, ideas and methods of pure mathematics are becoming increasingly important within computational and applied mathematics. At the core of computer science is the study of computability and complexity for discrete mathematical structures. Studying the foundations of computational mathematics raises similar questions concerning continuous mathematical structures. There are several reasons for these developments. The exponential growth of computing power is bringing computational methods into ever new application areas. Equally important is the advance of software and programming languages, which to an increasing degree allows the representation of abstract mathematical structures in program code. Symbolic computing is bringing algorithms from mathematical analysis into the...

  8. SYMPOSIUM: Multiparticle Dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1984-09-15

    How is the seemingly simple world of quarks and leptons related to the complicated phenomena that particle physicists see in their detectors? This was the theme of the 15th Symposium on multiparticle dynamics held in Lund, Sweden, from 11-16 June. Apart from the many results from the CERN proton-antiproton Collider, a recurrent theme during the conference was the growing awareness of the importance of quark 'hadronization'. Everyone knows that isolated quarks have never been found in Nature. Only those combinations of quarks and antiquarks that form hadrons have been detected. The dressing of the quarks to become hadrons goes under the name 'hadronization' and this process is very difficult to describe theoretically from first principles. Even the currently accepted theory for strong quark interactions — quantum chromodynamics, QCD — has difficulties. QCD has been shown to be a good theory describing 'small distance phenomena' — small compared to a hadron.

  9. Summary Report on the SAE 2016 Range Extenders for Electric Vehicles Symposium

    Energy Technology Data Exchange (ETDEWEB)

    Curran, Scott [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wagner, Robert M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Campbell, Russ [SRA International, Inc., Arlington, VA (United States)

    2017-03-01

    The SAE 2016 Range Extenders for Electric Vehicles Symposium was a 2-day technical meeting focused on the role of advanced internal combustion engines (ICEs) and other novel energy converter technologies for extending the range of electric vehicles (EVs). The first-of-its-kind symposium was notable for focusing solely on the range extender (REx) technologies and not the EVs. The technical program featured presentations from international leaders from industry, government, national laboratories, and academia. The opening keynote presentations covered a broad range of topics including consumer behavior, policy implications, regulatory considerations, and REx architectures as enablers for advanced technologies. The technical sessions focused on an array of REx technologies including conventional ICEs, as well as less conventional or emerging technologies such as microturbines, fuel cells, low-temperature combustion engines, and aluminum-air batteries. The symposium included two panel sessions. The trend toward increasing vehicle electrification and the changing role of ICEs and other auxiliary power unit technologies for use as REx’s is leading to new research and design development needs. The symposium captured the interest of the industry and research communities in exploring the opportunities and challenges associated with REx’s for EVs. This report includes key takeaways, summarized below, and draft notes for each presentation and panel discussion.

  10. New technologies reducing emissions from combustion of biofuels

    International Nuclear Information System (INIS)

    Oravainen, H.

    1997-01-01

    In reducing CO 2 emissions, bioenergy will be the most important source of renewable energy in the next few decades. In principle, combustion of biomass is friendly to the environment because CO 2 released during combustion is recycled back into natural circulation. Biofuels normally contain little nitrogen and sulphur. However, depending on the combustion technology used, emissions may be quite high. This is true of combustion of biomass fuels in small appliances like wood stoves, fireplaces, small boilers etc. When fuels having high content of volatile matter are burnt in appliances using batch type combustion, the process is rather an unsteady-state combustion. Emissions of carbon monoxide, other combustible gases and particulates are quite difficult to avoid. With continuous combustion processes this is not normally a problem. This conference paper presents some means of reducing emissions from combustion of biofuels. 5 refs., 4 figs

  11. Rotary combustion device

    NARCIS (Netherlands)

    2008-01-01

    Rotary combustion device (1) with rotary combustion chamber (4). Specific measures are taken to provide ignition of a combustible mixture. It is proposed that a hollow tube be provided coaxially with the axis of rotation (6), so that a small part of the mixture is guided into the combustion chamber.

  12. Mitigating the effect of siloxanes on internal combustion engines using landfill gasses

    Science.gov (United States)

    Besmann, Theodore M

    2014-01-21

    A waste gas combustion method that includes providing a combustible fuel source, in which the combustible fuel source is composed of at least methane and siloxane gas. A sodium source or magnesium source is mixed with the combustible fuel source. Combustion of the siloxane gas of the combustible fuel source produces a silicon containing product. The sodium source or magnesium source reacts with the silicon containing product to provide a sodium containing glass or sodium containing silicate, or a magnesium containing silicate. By producing the sodium containing glass or sodium containing silicate, or the magnesium containing silicate, or magnesium source for precipitating particulate silica instead of hard coating, the method may reduce or eliminate the formation of silica deposits within the combustion chamber and the exhaust components of the internal combustion engine.

  13. A chemometric investigation of aromatic emission profiles from a marine engine in comparison with residential wood combustion and road traffic: Implications for source apportionment inside and outside sulphur emission control areas

    Science.gov (United States)

    Czech, Hendryk; Stengel, Benjamin; Adam, Thomas; Sklorz, Martin; Streibel, Thorsten; Zimmermann, Ralf

    2017-10-01

    Ship emissions are known to cause severe impacts on human health, but are less restricted than land-based emissions. A regulation to improve air quality in coastal regions and frequented waterways is the limitation of fuel sulphur content to 0.1% in sulphur emission control areas (SECAs), which has caused a switch from heavy fuel oil (HFO) towards diesel-like marine gas oil (MGO) or marine diesel oil (MDO). The fraction of aromatic organic vapours in the exhaust from a marine engine, operating on HFO and MGO, was investigated by resonance-enhanced multi-photon ionisation time-of-flight mass spectrometry (REMPI-TOFMS). MGO with fuel sulphur content (FSC) below 0.1% and HFO with an average FSC of 2.7% denote representative marine fuels inside and outside SECAs, respectively. The obtained emission spectra were combined with data of previous REMPI-TOFMS studies of combustion engines and wood combustion in statistical analyses to derive marker substances for ship emissions inside and outside SECAs. A diagnostic ratio of C2-naphthalenes to methyl-naphthalenes was found to hold for a good discriminator between ship emissions on the one hand and road traffic and wood combustion on the other hand. Furthermore, random REMPI spectra from all emission sources were mixed with different proportions in a simulation to create a model based on partial least square (PLS) regression for the prediction of ship contribution to aromatic organic vapours. We point out that in particular PAHs with higher degree of alkylation are significant markers for primary ship emissions which may support source apportionment studies inside and outside SECAs to assess the benefits of fuel sulphur content regulation on air quality.

  14. Symposium Promotes Technological Literacy through STEM

    Science.gov (United States)

    Havice, Bill; Marshall, Jerry

    2009-01-01

    This article describes a symposium which promotes technological literacy through science, technology, engineering, and mathematics (STEM). The three-day symposium titled, "The Anderson, Oconee, Pickens Symposium on Teaching and Learning STEM Standards for the 21st Century," was held August 4-6, 2008 at the Tri-County Technical College…

  15. Scrutinizing the combustion, performance and emissions of safflower biodiesel–kerosene fueled diesel engine used as power source for a generator

    International Nuclear Information System (INIS)

    Aydın, Hüseyin

    2016-01-01

    Highlights: • Effects of kerosene addition to biodiesel in a diesel engine were investigated. • S90&K10, S75&K25 and S50&K50 were tested and comparisons have been made with D2. • Patterns of combustion parameters have found be quite similar for blend fuels and D2. • The highest efficiency value is obtained for S50&K50 blend. • HC emissions a bit increased and NOx emissions were decreased. - Abstract: When neat biodiesel or its blends with diesel fuel that contain high amounts of biodiesel are used in diesel engines some operational problems such as poor injection, bad atomization and incomplete combustion occur mainly due to higher viscosity and surface tension. Engine problems with the use of biodiesel–fuel blends that contain higher percentages of biodiesel need to be solved in order to utilize the advantages of biodiesel in environmental and economical ways. The mentioned problems can also be solved by blending biodiesel with another low density or viscosity fuel such as kerosene. In present study biodiesel was produced from safflower oil. S90&K10, S75&K25 and S50&K50 were prepared by blending biodiesel with kerosene. A 4 cylinder diesel engine that was used to drive an electric generator was used to deeply investigate the similarity of combustion, performance and emission characteristics of the blend fuels to D2. All experiments were carried out at constant loads of 3.6, 7.2 and 10.8 kW generated powers. Patterns of combustion parameters found to be quite similar for blends and D2 fuel. NO_x emissions were considerably decreased with percentages of 68.2%, 56.9% and 55.1% for S50&K50, S75&K25 and S90&K10, respectively while unburned HC emissions were a bit increased. Mass fuel consumption and BSFC were slightly increased for S75&K25 and S90&K10, but they were decreased with an average increase in BTE by 3.84% for S50&K50 fuel when compared to D2. Eventually, it was concluded that high percentages of safflower oil biodiesel can be a potential

  16. International Symposium on Nuclear Safety

    International Nuclear Information System (INIS)

    2013-03-01

    Nuclear Regulatory Authority of the Slovak Republic and the Embassy of Japan in the Slovak Republic, under the auspices of the Deputy Prime Minister and Minister of Foreign and European Affairs Mr Lajcak organized International Symposium on Nuclear Safety on 14 and 15 March 2013. The symposium took place almost exactly two years after the occurrence of accidents at the Japanese nuclear power plant Fukushima Daichi. The main mission of the symposium was an attempt to contribute to the improvement of nuclear safety by sharing information and lessons presented by Japanese experts with experts from the region, the International Atomic Energy Agency (IAEA) and the European Commission. The aim of the symposium, unlike many other events organized in connection with the events in Fukushima Daichi NPP, was a summary of the results of stress tests and measures update adopted by the international community, especially within Europe. Panel discussion was included to the program of the symposium for this aim was, mainly focused on the current state of implementation of the National Action Plan of the Slovak Republic, the Czech Republic, Poland, Ukraine and Switzerland and the IAEA Action Plan.

  17. Reduced NOX combustion method

    International Nuclear Information System (INIS)

    Delano, M.A.

    1991-01-01

    This patent describes a method for combusting fuel and oxidant to achieve reduced formation of nitrogen oxides. It comprises: It comprises: heating a combustion zone to a temperature at least equal to 1500 degrees F.; injecting into the heated combustion zone a stream of oxidant at a velocity within the range of from 200 to 1070 feet per second; injecting into the combustion zone, spaced from the oxidant stream, a fuel stream at a velocity such that the ratio of oxidant stream velocity to fuel stream velocity does not exceed 20; aspirating combustion gases into the oxidant stream and thereafter intermixing the aspirated oxidant stream and fuel stream to form a combustible mixture; combusting the combustible mixture to produce combustion gases for the aspiration; and maintaining the fuel stream substantially free from contact with oxidant prior to the intermixture with aspirated oxidant

  18. Wood chemistry symposium: from muka to lignin

    Energy Technology Data Exchange (ETDEWEB)

    MacLeod, M.

    1979-01-01

    The Canadian Wood Chemistry Symposium held during September, 1979, is reviewed. The chemical and physical explanations of delignification were debated. Problems of mechanical pulping include insufficient brightness, yellowing, and low strength relative to energy consumption. A session on chemicals, energy, and food from wood began with criteria for a viable project, which included adequate return on investment, modest capital investment requirements, identified pre-existing markets, and favorable thermodynamic balances. The pulp and paper industry should improve its methods of using bark and wood waste in direct combustion (by pre-drying wastes and improving furnace efficiency) rather than supporting oil-from-wood projects, since using a waste for fuel will free fossil fuels for uses in synthetic fibers and thermoplastics. In the area of food, there are modest successes with cellulose fiber additives to bread and snack food and single cell protein (which, though made from wastes, cannot compete with soy protein). However, making monomeric sugars from wood polysaccharides is not an efficient process, and muka, animal feed supplement from foliage, is successful only in Russia. In Canada it cannot compete with agricultural products. Alpha cellulose is a major wood chemical product. Promising uses include cellulose derived thermoplastics and lignosulphonates for secondary oil recovery. Instead of breaking wood polysaccharides and lignin into monomers and then repolymerizing them, it is possible to use the pre-built polymers; such an approach is illustrated by use of lignin in polyurethane foams, adhesives, and coatings.

  19. Memorial Symposium for Willibald Jentschke

    CERN Multimedia

    2002-01-01

    Willibald 'Willi' Jentschke, Director General of CERN from 1971 to 1975 and founder of the DESY Laboratory in Hamburg, died last March, just a few months after celebrating his 90th birthday. At that time, the Bulletin dedicated an article to him (Bulletin n°19-20/2002). Now, CERN has organised a Memorial Symposium for next Thursday 31 October, where you are cordially invited. This tribute will include the following speechs: L. Maiani : Welcome E. Lohrmann : Message from DESY H. Schopper : Willi Jentschke M. Veltman and D. Perkins : The Neutral Currents K. Johnsen : The ISR in Jentschke's time K. Winter : Some recollections of Jentschke The Memorial Symposium will take place in the Council Chamber, Thursday 31 October at 15 hrs. Drinks will be served at 17:30 hrs following the symposium.

  20. The 1956 CERN Symposium

    CERN Document Server

    Jarlskog, Cecilia

    2014-01-01

    CERN, currently the largest organization in the world for particle physics, was founded in 1954. Originally located in Meyrin, at the outskirts of the city of Geneva in Switzerland, it has with time extended into neighboring France. The Theoretical Study Division of CERN, however, was created already in 1952, i.e., before the official inauguration of CERN. It was situated in Copenhagen. Christian Møller [1] was appointed (part-time) as the Director and there were two full time senior staff members, Gunnar Källén and Ben R. Mottelson. While constructing buildings and accelerators were in progress, an international conference was organized by CERN in the city of Geneva. This “CERN Symposium on High Energy Accelerators and Pion Physics”, 11–23 June 1956, attracted about 250 participants from outside CERN, among them at least 18 Nobel Laureates or future Laureates. Unfortunately, the participants from CERN are not listed in the Proceedings [2]. The conference focused on measuring devices such as bubbl...

  1. Marine pollution. Proceedings of an international symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    The marine environment - understanding and protecting for the future were at the forefront of the International Symposium on Marine Pollution convened in Monaco from 5 to 9 October 1998, as one of the major events of the UN International Year of Oceans. Over 400 international experts from 61 Member States and 8 international organizations delivered 114 oral presentations in plenary and parallel sessions and made 215 poster presentations. New achievements were reported in identifying the sources of pollution, on the behaviour and fate of contaminants in seawater, biota and sediments, on the use of radioactive and non-radioactive tracers for the studies of transport and circulation processes in the world`s oceans and seas, on studies of radioactive waste dumping sites and nuclear weapons test sites, on local, regional and global computer modelling of the transport of contaminants and on many other topics in marine pollution. New developments in high sensitivity analytical measurements of contaminants with emphasis on nuclear and isotopic methods were also presented. Information on global and regional marine pollution studies programmes was also given and participants had the chance to interacts with leading experts in the field and ro discuss future trends in marine pollution studies. This TECDOC contains some of the papers submitted on issues falling within the thematic scope od the symposium which were presented in oral and poster presentations Refs, figs, tabs

  2. International symposium on marine pollution. Extended synopses

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-12-31

    The marine environment - understanding and protecting for the future were at the forefront of the International Symposium on Marine Pollution convened in Monaco from 5 to 9 October 1998, as one of the major events of the UN International Year of the Oceans. New achievements were reported in identifying the sources of pollution, on the behaviour and fate of contaminants in seawater, biota and sediments, on the use of radioactive and non-radioactive tracers for studies of transport and circulation processes in the world`s oceans and seas, on studies of radioactive waste dumping sites and nuclear weapons test sites, on local, regional and global computer modelling of the transport of contaminants and on many other topics in marine pollution. New developments in high sensitivity analytical measurements of contaminants with emphasis on nuclear and isotopic methods were also presented. This document contains extended synopses of 390 oral and poster presentations made at the symposium. Each synopsis was indexed separately. Refs, figs, tabs

  3. Marine pollution. Proceedings of an international symposium

    International Nuclear Information System (INIS)

    1999-07-01

    The marine environment - understanding and protecting for the future were at the forefront of the International Symposium on Marine Pollution convened in Monaco from 5 to 9 October 1998, as one of the major events of the UN International Year of Oceans. Over 400 international experts from 61 Member States and 8 international organizations delivered 114 oral presentations in plenary and parallel sessions and made 215 poster presentations. New achievements were reported in identifying the sources of pollution, on the behaviour and fate of contaminants in seawater, biota and sediments, on the use of radioactive and non-radioactive tracers for the studies of transport and circulation processes in the world's oceans and seas, on studies of radioactive waste dumping sites and nuclear weapons test sites, on local, regional and global computer modelling of the transport of contaminants and on many other topics in marine pollution. New developments in high sensitivity analytical measurements of contaminants with emphasis on nuclear and isotopic methods were also presented. Information on global and regional marine pollution studies programmes was also given and participants had the chance to interacts with leading experts in the field and ro discuss future trends in marine pollution studies. This TECDOC contains some of the papers submitted on issues falling within the thematic scope od the symposium which were presented in oral and poster presentations

  4. Proceedings of the Fourth Compton Symposium. Proceedings

    International Nuclear Information System (INIS)

    Dermer, C.D.; Strickman, M.S.; Kurfess, J.D.

    1997-01-01

    These proceedings represent the papers presented at the Fourth Compton Symposium held in Williamsburg, Virginia in April, 1997. This symposium gives the latest development in gamma ray astronomy and summarizes the results obtained by the Compton Gamma Ray Observatory. One of the missions of the Observatory has been the study of physical processes taking place in the most dynamic sites in the Universe, including supernovae, novae, pulsars, black holes, active galaxies, and gamma-ray bursts. The energies covered range from hard X-ray to gamma-ray regions from 15 KeV to 30 GeV. The Burst and Transient Experiment (BASTE) measures brightness variations in gamma-ray bursts and solar flares. The Oriented Scintillation Spectroscopy Experiment (OSSE), measures spectral output of astrophysical sources in the 0.05 to 10 MeV range. The Imaging Compton Telescope (COMPTEL) detects gamma-rays and performs sky survey in the energy range 1 to 30 MeV. The Energetic Gamma Ray Experiment Telescope (EGRET) covers the broadest energy range from 20 MeV to 30 GeV. The papers presented result from all of the above. There were 249 papers presented and out of these, 6 have been abstracted for the Energy, Science and Technology database

  5. Extended lattice Boltzmann scheme for droplet combustion.

    Science.gov (United States)

    Ashna, Mostafa; Rahimian, Mohammad Hassan; Fakhari, Abbas

    2017-05-01

    The available lattice Boltzmann (LB) models for combustion or phase change are focused on either single-phase flow combustion or two-phase flow with evaporation assuming a constant density for both liquid and gas phases. To pave the way towards simulation of spray combustion, we propose a two-phase LB method for modeling combustion of liquid fuel droplets. We develop an LB scheme to model phase change and combustion by taking into account the density variation in the gas phase and accounting for the chemical reaction based on the Cahn-Hilliard free-energy approach. Evaporation of liquid fuel is modeled by adding a source term, which is due to the divergence of the velocity field being nontrivial, in the continuity equation. The low-Mach-number approximation in the governing Navier-Stokes and energy equations is used to incorporate source terms due to heat release from chemical reactions, density variation, and nonluminous radiative heat loss. Additionally, the conservation equation for chemical species is formulated by including a source term due to chemical reaction. To validate the model, we consider the combustion of n-heptane and n-butanol droplets in stagnant air using overall single-step reactions. The diameter history and flame standoff ratio obtained from the proposed LB method are found to be in good agreement with available numerical and experimental data. The present LB scheme is believed to be a promising approach for modeling spray combustion.

  6. 43rd Aerospace Mechanisms Symposium

    Science.gov (United States)

    Boesiger, Edward A.

    2016-01-01

    The Aerospace Mechanisms Symposium (AMS) provides a unique forum for those active in the design, production and use of aerospace mechanisms. A major focus is the reporting of problems and solutions associated with the development and flight certification of new mechanisms. Sponsored and organized by the Mechanisms Education Association, responsibility for hosting the AMS is shared by the National Aeronautics and Space Administration and Lockheed Martin Space Systems Company (LMSSC). Now in its 43rd symposium, the AMS continues to be well attended, attracting participants from both the U.S. and abroad. The 43rd AMS was held in Santa Clara, California on May 4, 5 and 6, 2016. During these three days, 42 papers were presented. Topics included payload and positioning mechanisms, components such as hinges and motors, CubeSats, tribology, and mechanism testing. Hardware displays during the supplier exhibit gave attendees an opportunity to meet with developers of current and future mechanism components. The high quality of this symposium is a result of the work of many people, and their efforts are gratefully acknowledged. This extends to the voluntary members of the symposium organizing committee representing the eight NASA field centers, LMSSC, and the European Space Agency. Appreciation is also extended to the session chairs, the authors, and particularly the personnel at ARC responsible for the symposium arrangements and the publication of these proceedings. A sincere thank you also goes to the symposium executive committee who is responsible for the year-to-year management of the AMS, including paper processing and preparation of the program. The use of trade names of manufacturers in this publication does not constitute an official endorsement of such products or manufacturers, either expressed or implied, by the National Aeronautics and Space Administration.

  7. Mining and Reclamation Technology Symposium

    Energy Technology Data Exchange (ETDEWEB)

    None Available

    1999-06-24

    The Mining and Reclamation Technology Symposium was commissioned by the Mountaintop Removal Mining/Valley Fill Environmental Impact Statement (EIS) Interagency Steering Committee as an educational forum for the members of the regulatory community who will participate in the development of the EIS. The Steering Committee sought a balanced audience to ensure the input to the regulatory community reflected the range of perspectives on this complicated and emotional issue. The focus of this symposium is on mining and reclamation technology alternatives, which is one of eleven topics scheduled for review to support development of the EIS. Others include hydrologic, environmental, ecological, and socio-economic issues.

  8. The Third International Symposium on Space Terahertz Technology: Symposium proceedings

    Science.gov (United States)

    1992-01-01

    Papers from the symposium are presented that are relevant to the generation, detection, and use of the terahertz spectral region for space astronomy and remote sensing of the Earth's upper atmosphere. The program included thirteen sessions covering a wide variety of topics including solid-state oscillators, power-combining techniques, mixers, harmonic multipliers, antennas and antenna arrays, submillimeter receivers, and measurement techniques.

  9. Combustion Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — For more than 30 years The Combustion Research Facility (CRF) has served as a national and international leader in combustion science and technology. The need for a...

  10. Alcohol combustion chemistry

    KAUST Repository

    Sarathy, Mani; Oß wald, Patrick; Hansen, Nils; Kohse-Hö inghaus, Katharina

    2014-01-01

    . While biofuel production and its use (especially ethanol and biodiesel) in internal combustion engines have been the focus of several recent reviews, a dedicated overview and summary of research on alcohol combustion chemistry is still lacking. Besides

  11. Conference/Symposium: 2017 Princeton-Combustion Institute Summer School on Combustion

    Science.gov (United States)

    2018-02-07

    Technology (KAUST). On behalf of all the attendees, the organizers of the Summer School express their profound gratitude to the lecturers, sponsors...professors. Personally, I want to thank you, Professor Law, and express my gratitude for the tremendous arrangement, great munificence, and the new

  12. Maximal combustion temperature estimation

    International Nuclear Information System (INIS)

    Golodova, E; Shchepakina, E

    2006-01-01

    This work is concerned with the phenomenon of delayed loss of stability and the estimation of the maximal temperature of safe combustion. Using the qualitative theory of singular perturbations and canard techniques we determine the maximal temperature on the trajectories located in the transition region between the slow combustion regime and the explosive one. This approach is used to estimate the maximal temperature of safe combustion in multi-phase combustion models

  13. Symposium: What Is College English?

    Science.gov (United States)

    Bloom, Lynn Z.; White, Edward M.; Enoch, Jessica; Hawk, Byron

    2013-01-01

    This symposium explores the role(s) College English has (or has not) had in the scholarly work of four scholars. Lynn Bloom explores the many ways College English influenced her work and the work of others throughout their scholarly lives. Edward M. White examines four articles he has published in College English and draws connections between…

  14. SYMPOSIUM ON PLANT PROTEIN PHOSPHORYLATION

    Energy Technology Data Exchange (ETDEWEB)

    JOHN C WALKER

    2011-11-01

    Protein phosphorylation and dephosphorylation play key roles in many aspects of plant biology, including control of cell division, pathways of carbon and nitrogen metabolism, pattern formation, hormonal responses, and abiotic and biotic responses to environmental signals. A Symposium on Plant Protein Phosphorylation was hosted on the Columbia campus of the University of Missouri from May 26-28, 2010. The symposium provided an interdisciplinary venue at which scholars studying protein modification, as it relates to a broad range of biological questions and using a variety of plant species, presented their research. It also provided a forum where current international challenges in studies related to protein phosphorylation could be examined. The symposium also stimulated research collaborations through interactions and networking among those in the research community and engaged students and early career investigators in studying issues in plant biology from an interdisciplinary perspective. The proposed symposium, which drew 165 researchers from 13 countries and 21 States, facilitated a rapid dissemination of acquired knowledge and technical expertise regarding protein phosphorylation in plants to a broad range of plant biologists worldwide.

  15. Diversity in the Workplace. Symposium.

    Science.gov (United States)

    2002

    Three papers comprise this symposium on diversity in the workplace. "Factors That Assist and Barriers That Hinder the Success of Diversity Initiatives in Multinational Corporations" (Rose Mary Wentling) reports that factors that assisted in the success were classified under diversity department, human, and work environment; barriers were…

  16. Indian symposium reviews tsunami response

    Directory of Open Access Journals (Sweden)

    Paula Banerjee

    2005-07-01

    Full Text Available A symposium of academics and human rights activists organised by the Calcutta Research Group assessed the extent to which relief and rehabilitation initiatives in Tamil Nadu and the Andaman and Nicobar islands have recognised the rights of those affected to receive aid without discrimination based on caste, religion or gender.

  17. National symposium on food irradiation

    International Nuclear Information System (INIS)

    Beyers, M.; Brodrick, H.T.; Van Niekerk, W.C.A.

    1980-01-01

    This report contains proceedings of papers delivered at the national symposium on food irradiation held in Pretoria. The proceedings have been grouped into the following sections: general background; meat; agricultural products; marketing; and radiation facilities - cost and plant design. Each paper has been submitted separately to INIS. Tables listing irradiated food products cleared for human consumption in different countries are given

  18. 44th Aerospace Mechanisms Symposium

    Science.gov (United States)

    Boesiger, Edward A. (Compiler)

    2018-01-01

    The Aerospace Mechanisms Symposium (AMS) provides a unique forum for those active in the design, production and use of aerospace mechanisms. A major focus is the reporting of problems and solutions associated with the development and flight certification of new mechanisms.

  19. 2016 Gilbert W. Beebe symposium

    Science.gov (United States)

    The National Academies of Sciences, Engineering, and Medicine is hosting the 2016 Gilbert W. Beebe Symposium. Its focus will be on commemorating the 1986 Chernobyl nuclear reactor accident and discussing the achievements of 30 years of studies on the radiation health effects following the accident and future research directions.

  20. AAAI 1993 Fall Symposium Reports

    OpenAIRE

    Levinson, Robert; Epstein, Susan; Terveen, Loren; Bonasso, R. Peter; Miller, David P.; Bowyer, Kevin; Hall, Lawrence

    1994-01-01

    The Association for the Advancement of Artificial Intelligence held its 1993 Fall Symposium Series on October 22-24 in Raleigh, North Carolina. This article contains summaries of the six symposia that were conducted: Automated Deduction in Nonstandard Logics; Games: Planning and Learning; Human-Computer Collaboration: Reconciling Theory, Synthesizing Practice; Instantiating Intelligent Agents; and Machine Learning and Computer Vision: What, Why, and How?

  1. 11. European cosmic ray symposium

    International Nuclear Information System (INIS)

    1989-03-01

    The biannual Symposium includes all aspects of cosmic ray research. The scientific programme was organized under three main headings: Cosmic rays in the heliosphere, Cosmic rays in the interstellar and extragalactic space, Properties of high-energy interactions as studied by cosmic rays. Seven invited talks were indexed seprately for the INIS database. (R.P.)

  2. Systems and methods of storing combustion waste products

    Science.gov (United States)

    Chen, Shen-En; Wang, Peng; Miao, Xiexing; Feng, Qiyan; Zhu, Qianlin

    2016-04-12

    In one aspect, methods of storing one or more combustion waste products are described herein. Combustion waste products stored by a method described herein can include solid combustion waste products such as coal ash and/or gaseous combustion products such as carbon dioxide. In some embodiments, a method of storing carbon dioxide comprises providing a carbon dioxide storage medium comprising porous concrete having a macroporous and microporous pore structure and flowing carbon dioxide captured from a combustion flue gas source into the pore structure of the porous concrete.

  3. The VLT Opening Symposium

    Science.gov (United States)

    1999-02-01

    Scientists Meet in Antofagasta to Discuss Front-Line Astrophysics To mark the beginning of the VLT era, the European Southern Observatory is organizing a VLT Opening Symposium which will take place in Antofagasta (Chile) on 1-4 March 1999, just before the start of regular observations with the ESO Very Large Telescope on April 1, 1999. The Symposium occupies four full days and is held on the campus of the Universidad Catolica del Norte. It consists of plenary sessions on "Science in the VLT Era and Beyond" and three parallel Workshops on "Clusters of Galaxies at High Redshift" , "Star-way to the Universe" and "From Extrasolar Planets to Brown Dwarfs" . There will be many presentations of recent work at the major astronomical facilities in the world. The meeting provides a very useful forum to discuss the latest developments and, in this sense, contributes to the planning of future research with the VLT and other large telescopes. The symposium will be opened with a talk by the ESO Director General, Prof. Riccardo Giacconi , on "Paranal - an observatory for the 21st century". It will be followed by reports about the first scientific results from the main astronomical instruments on VLT UT1, FORS1 and ISAAC. The Symposium participants will see the VLT in operation during special visits to the Paranal Observatory. Press conferences are being arranged each afternoon to inform about the highlights of the conference. After the Symposium, there will be an Official Inauguration Ceremony at Paranal on 5 March Contributions from ESO ESO scientists will make several presentations at the Symposium. They include general reviews of various research fields as well as important new data and results from the VLT that show the great potential of this new astronomical facility. Some of the recent work is described in this Press Release, together with images and spectra of a large variety of objects. Note that all of these data will soon become publicly available via the VLT Archive

  4. Sources

    International Nuclear Information System (INIS)

    Duffy, L.P.

    1991-01-01

    This paper discusses the sources of radiation in the narrow perspective of radioactivity and the even narrow perspective of those sources that concern environmental management and restoration activities at DOE facilities, as well as a few related sources. Sources of irritation, Sources of inflammatory jingoism, and Sources of information. First, the sources of irritation fall into three categories: No reliable scientific ombudsman to speak without bias and prejudice for the public good, Technical jargon with unclear definitions exists within the radioactive nomenclature, and Scientific community keeps a low-profile with regard to public information. The next area of personal concern are the sources of inflammation. This include such things as: Plutonium being described as the most dangerous substance known to man, The amount of plutonium required to make a bomb, Talk of transuranic waste containing plutonium and its health affects, TMI-2 and Chernobyl being described as Siamese twins, Inadequate information on low-level disposal sites and current regulatory requirements under 10 CFR 61, Enhanced engineered waste disposal not being presented to the public accurately. Numerous sources of disinformation regarding low level radiation high-level radiation, Elusive nature of the scientific community, The Federal and State Health Agencies resources to address comparative risk, and Regulatory agencies speaking out without the support of the scientific community

  5. IAEA symposium on international safeguards

    International Nuclear Information System (INIS)

    1999-01-01

    The eighth IAEA Symposium on International Safeguards was organized by the IAEA in cooperation with the Institute of Nuclear Materials Management and the European Safeguards Research and Development Association. It was attended by over 350 specialists and policy makers in the field of nuclear safeguards and verification from more than 50 countries and organizations. The purpose of the Symposium was to foster a broad exchange of information on concepts and technologies related to important developments in the areas of international safeguards and security. For the first time in the history of the symposia, the IAEA is issuing proceedings free of charge to participants on CD-ROM. The twenty-two plenary, technical, and poster sessions featured topics related to technological and policy aspects from national, regional and global perspectives. The theme of the Symposium: Four Decades of Development - Safeguarding into the New Millennium set the stage for the commemoration of a number of significant events in the annals of safeguards. 1997 marked the Fortieth Anniversary of the IAEA, the Thirtieth Anniversary of the Tlatelolco Treaty, and the Twentieth Anniversary of the Department of Safeguards Member State Support Programmes. There were special events and noted presentations featuring these anniversaries and giving the participants an informative retrospective view of safeguards development over the past four decades. The proceedings of this symposium provide the international community with a comprehensive view of where nuclear safeguards and verification stood in 1997 in terms of the growing demands and expectations. The Symposium offered thoughtful perspectives on where safeguards are headed within the broader context of verification issues. As the world of international nuclear verification looks towards the next millennium, the implementation of the expanding and strengthened safeguards system presents formidable challenges

  6. Uncertainties in hydrogen combustion

    International Nuclear Information System (INIS)

    Stamps, D.W.; Wong, C.C.; Nelson, L.S.

    1988-01-01

    Three important areas of hydrogen combustion with uncertainties are identified: high-temperature combustion, flame acceleration and deflagration-to-detonation transition, and aerosol resuspension during hydrogen combustion. The uncertainties associated with high-temperature combustion may affect at least three different accident scenarios: the in-cavity oxidation of combustible gases produced by core-concrete interactions, the direct containment heating hydrogen problem, and the possibility of local detonations. How these uncertainties may affect the sequence of various accident scenarios is discussed and recommendations are made to reduce these uncertainties. 40 references

  7. Symposium on the Foundations of Newtonian Scholarship

    CERN Document Server

    Nauenberg, Michael; The foundations of Newtonian scholarship

    2000-01-01

    Newtonian scholarship has taken great steps forward in the last half-century.The recent completion of critical editions of Newton's mathematical papers and of his scientific correspondence, as well as the publication of the first volume of his optical papers and of variant readings of the Principia in the original Latin, have made most of Newton's scientific work generally available for study and analysis for the first time. This has provided a better understanding of Newton's Principia and Optics especially regarding their origin and interpretation, much of which has remained obscure for several centuries. Some of the new developments and insights are presented in this book by several of the scholars who have made these primary sources accessible, and by others who are using them to elucidate Newton's work. Most of the papers included were presented at the Symposium on the Foundations of Newtonian Scholarship, held at the Royal Society in London in March 1997.

  8. Coal combustion technology in China

    International Nuclear Information System (INIS)

    Huang, Z.X.

    1994-01-01

    Coal is the most important energy source in China, the environmental pollution problem derived from coal burning is rather serious in China. The present author discusses coal burning technologies both in boilers and industrial furnaces and their relations with environmental protection problems in China. The technological situations of Circulating Fluidized Bed Coal Combustor, Pulverized Coal Combustor with Aerodynamic Flame Holder and Coal Water Slurry Combustion have been discussed here as some of the interesting problems in China only. (author). 3 refs

  9. New class of combustion processes

    International Nuclear Information System (INIS)

    Merzhanov, A.G.; Borovinskaya, I.P.

    1975-01-01

    A short review is given of the results of work carried out since 1967 on studying the combustion processes caused by the interaction of chemical elements in the condensed phase and leading to the formation of refractory compounds. New phenomena and processes are described which are revealed when investigating the combustion of the systems of this class, viz solid-phase combustion, fast combustion in the condensed phase, filtering combustion, combustion in liquid nitrogen, spinning combustion, self-oscillating combustion, and repeated combustion. A new direction in employment of combustion processes is discussed, viz. a self-propagating high-temperature synthesis of refractory nitrides, carbides, borides, silicides and other compounds

  10. EDITORIAL: Nobel Symposium 148: Graphene and Quantum Matter Nobel Symposium 148: Graphene and Quantum Matter

    Science.gov (United States)

    Niemi, Antti; Wilczek, Frank; Ardonne, Eddy; Hansson, Hans

    2012-01-01

    The 2010 Nobel Symposium on Graphene and Quantum Matter, was held at the Grand Hotel in Saltsjöbaden south of Stockholm on 27-31 May. The main theme of the meeting was graphene, and the symposium turned out to be very timely: two of the participants, Andre Geim and Kanstantin Novoselov returned to Stockholm less then six months later to receive the 2010 Nobel Prize in Physics. In these proceedings leading experts give up-to-date, historical, experimental, theoretical and technological perspectives on the remarkable material graphene, and several papers also make connections to other states of quantum matter. Saltsjöbaden is beautifully situated in the inner archipelago of Stockholm. It provided a pleasant setting for the talks and the ensuing discussions that took place in an enthusiastic and friendly atmosphere. The social programme included a boat trip in the light summer night and a dinner at the renowned Grand Hotel. These proceedings are ordered thematically, starting with historical overviews, followed by first experimental and then theoretical papers on the physics of graphene. Next are several papers addressing more general topics in quantum matter and finally contributions on the technological applications of graphene. We hope that this volume will serve as a source of knowledge and inspiration for any physicist interested in graphene, and at the same time provide a snapshot of a young field of research that is developing at very high speed. We are grateful to Marja Fahlander for excellent administrative support, and to the Nobel Foundation who funded the symposium.

  11. A Real-Time Systems Symposium Preprint.

    Science.gov (United States)

    1983-09-01

    Real - Time Systems Symposium Preprint Interim Tech...estimate of the occurence of the error. Unclassii ledSECUqITY CLASSIF’ICA T" NO MI*IA If’ inDI /’rrd erter for~~ble. ’Corrputnqg A REAL - TIME SYSTEMS SYMPOSIUM...ABSTRACT This technical report contains a preprint of a paper accepted for presentation at the REAL - TIME SYSTEMS SYMPOSIUM, Arlington,

  12. sources

    Directory of Open Access Journals (Sweden)

    Shu-Yin Chiang

    2002-01-01

    Full Text Available In this paper, we study the simplified models of the ATM (Asynchronous Transfer Mode multiplexer network with Bernoulli random traffic sources. Based on the model, the performance measures are analyzed by the different output service schemes.

  13. Combustion modeling in internal combustion engines

    Science.gov (United States)

    Zeleznik, F. J.

    1976-01-01

    The fundamental assumptions of the Blizard and Keck combustion model for internal combustion engines are examined and a generalization of that model is derived. The most significant feature of the model is that it permits the occurrence of unburned hydrocarbons in the thermodynamic-kinetic modeling of exhaust gases. The general formulas are evaluated in two specific cases that are likely to be significant in the applications of the model.

  14. Boiler using combustible fluid

    Science.gov (United States)

    Baumgartner, H.; Meier, J.G.

    1974-07-03

    A fluid fuel boiler is described comprising a combustion chamber, a cover on the combustion chamber having an opening for introducing a combustion-supporting gaseous fluid through said openings, means to impart rotation to the gaseous fluid about an axis of the combustion chamber, a burner for introducing a fluid fuel into the chamber mixed with the gaseous fluid for combustion thereof, the cover having a generally frustro-conical configuration diverging from the opening toward the interior of the chamber at an angle of between 15/sup 0/ and 55/sup 0/; means defining said combustion chamber having means defining a plurality of axial hot gas flow paths from a downstream portion of the combustion chamber to flow hot gases into an upstream portion of the combustion chamber, and means for diverting some of the hot gas flow along paths in a direction circumferentially of the combustion chamber, with the latter paths being immersed in the water flow path thereby to improve heat transfer and terminating in a gas outlet, the combustion chamber comprising at least one modular element, joined axially to the frustro-conical cover and coaxial therewith. The modular element comprises an inner ring and means of defining the circumferential, radial, and spiral flow paths of the hot gases.

  15. International Symposium on Monitoring Behavior and Supervisory Control

    CERN Document Server

    Johannsen, Gunnar

    1976-01-01

    This book includes all papers presented at the International Symposium on Monitoring Behavior and Supervisory Control held at Berchtesgaden, Federal Republic of Germany, March 8-12, 1976. The Symposium was sponsored by the Scientific Affairs Division of the North Atlantic Treaty Organization, Brussels, and the government of the Federal Republic of Germany, Bonn. We believe the book constitutes an important and timely status report on monitoring behavior and supervisory control by human operators of complex man-machine systems in which the computer is sharing key functions with the man. These systems include aircraft and other vehicles, nuclear and more conventional power plants, and processes for the manu­ facture of chemicals, petroleum, and discrete parts. By "monitoring" we mean the systematic observation by a human operator of mul tiple sources of information, e. g. , ranging from integrated display consoles to disparate "live situations". The monitor's purpose is to determine whether operations are norm...

  16. Radioisotopes in Hydrology. Proceedings of a Symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1963-08-15

    The increasing emphasis on the development of water resources poses problems which are of interest to all countries, both developing and advanced, where the demand for water is continuously rising. There is no doubt that greater efforts must be made to evaluate, control and develop water resources using all scientific means available and during recent years increasing attention has been directed to the supplementation of hydrological methods with radioisotope techniques. These techniques have already been applied to a number of problems and their potential usefulness demonstrated. Radioisotopes can be used for stream discharge measurements with an accuracy as good as that obtainable with conventional methods. They are also finding increasing application in the measurement of groundwater direction and velocity, the study of suspected interconnections between different sources of water, and the investigation of mixing processes in rivers and lakes. Radioisotope techniques have been used in different parts of the world for studying the transport of silt in rivers and harbours. Present research is directed towards making these investigations on a quantitative basis which, if successful, would be of great importance in the design of hydraulic structures. The method of finding out the age of groundwater by measuring its natural tritium content can be applied to the determination of the recharge rate of groundwater bodies, so enabling a more rational use of the groundwater reserves without fear of overexploitation. Current research is aimed at using carbon-14 for groundwater-dating to extend the age measurable by tritium. A Symposium on the use of radioisotopes in hydrology was organized by the Agency and held in March 1963 in Tokyo in co-operation with the Japanese Government, for whose material and other assistance and generous hospitality the Agency wishes to record its grateful appreciation. The Symposium was attended by about 100 participants from 14 countries and 5

  17. Bifurcation, pattern formation and chaos in combustion

    International Nuclear Information System (INIS)

    Bayliss, A.; Matkowsky, B.J.

    1991-01-01

    In this paper problems in gaseous combustion and in gasless condensed phase combustion are studied both analytically and numerically. In gaseous combustion we consider the problem of a flame stabilized on a line source of fuel. The authors find both stationary and pulsating axisymmetric solutions as well as stationary and pulsating cellular solutions. The pulsating cellular solutions take the form of either traveling waves or standing waves. Transitions between these patterns occur as parameters related to the curvature of the flame front and the Lewis number are varied. In gasless condensed phase combustion both planar and nonplanar problems are studied. For planar condensed phase combustion we consider two models: accounts for melting and does not. Both models are shown to exhibit a transition from uniformly to pulsating propagating combustion when a parameter related to the activation energy is increased. Upon further increasing this parameter both models undergo a transition to chaos: by intermittency and by a period doubling sequence. In nonplanar condensed phase combustion the nonlinear development of a branch of standing wave solutions is studied and is shown to lead to relaxation oscillations and subsequently to a transition to quasi-periodicity

  18. Ninth international symposium on radiopharmacology

    International Nuclear Information System (INIS)

    1995-01-01

    The goal of this Symposium is to provide a forum for those international scientists involved in applying the principles of pharmacology and radiation biology to the development of agents for the diagnosis and treatment of disease. The program will highlight state-of-the-art progress in the development of those agents used in conjunction with some form of radiation such as radiopharmaceuticals, radiopaques, photo- and radiosensitizing drugs, and neutron capture agents. An underlying pharmacokinetic parameter associated with all these agents is the need for site-specific delivery to an organ or tumor. Therefore, a major goal of the symposium will be to address those pharmacologic principles for targeting molecules to specific tissue sites. Accordingly, session themes will include receptor-mediated processes, membrane transporters, antibody interactions, metabolic trapping, and oligonucleotide-antisense mechanisms

  19. Memorial Symposium for Victor Weisskopf

    CERN Multimedia

    2002-01-01

    Victor 'Viki' Weisskopf, former Director General of CERN from 1961 to 1965, passed away five months ago. At that time, the Bulletin dedicated its coverpage to this brilliant physicist (19-20/2002). Now, CERN has organised a Memorial Symposium for next Tuesday 17 September, where you are cordially invited. This tribute will include the following speechs: L. Maiani: Welcome J. D. Jackson: Highlights from the career and scientific works of Victor F. Weisskopf M. Hine and K. Johnsen: Working with Viki at CERN M. Jacob: Knowledge and Wonder A member of Viki's family: Reminiscences. The Memorial Symposium will take place in the Main Auditorium at 15h. Drinks will be served in Pas Perdus at 17h 30.

  20. Ninth international symposium on radiopharmacology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The goal of this Symposium is to provide a forum for those international scientists involved in applying the principles of pharmacology and radiation biology to the development of agents for the diagnosis and treatment of disease. The program will highlight state-of-the-art progress in the development of those agents used in conjunction with some form of radiation such as radiopharmaceuticals, radiopaques, photo- and radiosensitizing drugs, and neutron capture agents. An underlying pharmacokinetic parameter associated with all these agents is the need for site-specific delivery to an organ or tumor. Therefore, a major goal of the symposium will be to address those pharmacologic principles for targeting molecules to specific tissue sites. Accordingly, session themes will include receptor-mediated processes, membrane transporters, antibody interactions, metabolic trapping, and oligonucleotide-antisense mechanisms.

  1. A shift in emission time profiles of fossil fuel combustion due to energy transitions impacts source receptor matrices for air quality

    NARCIS (Netherlands)

    Hendriks, C.; Kuenen, J.; Kranenburg, R.; Scholz, Y.; Schaap, M.

    2015-01-01

    Effective air pollution and short-lived climate forcer mitigation strategies can only be designed when the effect of emission reductions on pollutant concentrations and health and ecosystem impacts are quantified. Within integrated assessment modeling source-receptor relationships (SRRs) based on

  2. Lump wood combustion process

    Science.gov (United States)

    Kubesa, Petr; Horák, Jiří; Branc, Michal; Krpec, Kamil; Hopan, František; Koloničný, Jan; Ochodek, Tadeáš; Drastichová, Vendula; Martiník, Lubomír; Malcho, Milan

    2014-08-01

    The article deals with the combustion process for lump wood in low-power fireplaces (units to dozens of kW). Such a combustion process is cyclical in its nature, and what combustion facility users are most interested in is the frequency, at which fuel needs to be stoked to the fireplace. The paper defines the basic terms such as burnout curve and burning rate curve, which are closely related to the stocking frequency. The fuel burning rate is directly dependent on the immediate thermal power of the fireplace. This is also related to the temperature achieved in the fireplace, magnitude of flue gas losses and the ability to generate conditions favouring the full burnout of the fuel's combustible component, which, at once ensures the minimum production of combustible pollutants. Another part of the paper describes experiments conducted in traditional fireplaces with a grate, at which well-dried lump wood was combusted.

  3. Symposium 3 of JENAM 2011

    CERN Document Server

    Georgieva, Katya; Nagovitsyn, Yury; The sun : new challenges

    2012-01-01

    These are the proceedings of the Symposium 3 of JENAM 2011 on new scientific challenges posed by the Sun. The topics covered are   1. The unusual sunspot minimum, which poses challenges to the solar dynamo theory 2. The Sun’s Terra-Hertz emission, which opens a new observational window 3. Corona wave activity 4. Space weather agents - initiation, propagation, and forecasting In 21 in-depth contributions, the reader will be presented with the latest findings.

  4. Memorial symposium for Victor Weisskopf.

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    A memorial symposium for Victor Weisskopf, CERN Director-General from 1961 to 1965, was held at CERN on 17 September 2002. Photo 01: L. Maiani: Welcome.Photo 02: J. D. Jackson: Highlights from the career and scientific works of Victor F. Weisskopf.Photos 05 09: M. Hine and K. Johnsen: Working with Viki at CERN.Photo 10: M. Jacob: Knowledge and Wonder.Photo 14: K. Worth (Viki's daughter): Reminiscences.

  5. Scandinavian Symposium on Reactor Waste

    International Nuclear Information System (INIS)

    1981-09-01

    More than 100 delegates forom the Scandinavian countries were gathered for a symposium on September 14-16 1981 at Kungaelv Sweden to discuss nuclear reactor waste. The organisation for the handling of radioactive waste at different countries was presented and the principles of radioactive safety were discussed. The planning of the deposition and storage of waste was described. The proceedings are reproduced on some twenty papers, a number of them written in English. (G.B.)

  6. National symposium on food irradiation

    International Nuclear Information System (INIS)

    1979-10-01

    This report contains abstracts of papers delivered at the National symposium on food irradiation held in Pretoria. The abstracts have been grouped into the following sections: General background, meat, agricultural products, marketing and radiation facilities - cost and plant design. Each abstract has been submutted separately to INIS. Tables listing irradiated food products cleared for human consumption in different countries are given as well as a table listing those irradiated food items that have been cleared in South Africa

  7. Rapporteurs report of the symposium

    International Nuclear Information System (INIS)

    Myerscough, Dan

    2014-01-01

    The objective of the symposium was to share current practice, experiences and innovations within the management of contaminated metallic radioactive material. The symposium was a forum for: Learning about current practices, Highlight strategic issues related to metals recycling, Exchange of experiences, Discussion of innovative and new techniques and needs for improvements, Developing and maintenance of networks in the area of metals recycling. The aim was to bring together operators, regulators, decision makers, scientists, consultants, contractors and other stakeholders. A short introduction by representatives from Studsvik, IAEA and OECD/NEA started the symposium followed by presentations by invited speakers from international organisations. Seven topical sessions covered issues relating to: 1 - Regulations and recommendations: - International recommendations and national legislation, - Application of regulations, - Regulator views; 2 - Minimising waste amounts: - Experience in minimising the generation of waste in the form of radioactive or potentially radioactive metals, - Activities to minimise the waste volumes for disposal; 3 - Characterisation and categorisation of metals to be recycled; 4 - Decontamination of metals for clearance; 5 - Melting of metals for clearance, reuse or volume reduction; 6 - Best practice in management of metals for clearance and recycling; 7 - Sustainability and public acceptance. Each session contained three to five presentations and group discussions. Each session was concluded with a short analysis of the presentations and the outcome of the group discussions. Conclusions of each session and outcome of the group discussions were presented on a Summing up the third day. The symposium also held a poster session with topics as above. This report provides a short summary of the various presentations and discussions concentrating on the key messages and outcomes of the sessions

  8. 10th International Symposium on Applications of Laser Techniques to Fluid Mechanics

    CERN Document Server

    Adrian, R J; Heitor, M V; Maeda, M; Tropea, C; Whitelaw, J H

    2002-01-01

    This volume includes revised and extended versions of selected papers presented at the Tenth International Symposium on Applications of Laser Techniques to Fluid Mechanics held at the Calouste Gulbenkian Foundation in Lisbon, during the period of July 10 to 13, 2000. The papers describe instrumentation developments for Velocity, Scalar and Multi-Phase Flows and results of measurements of Turbulent Flows, and Combustion and Engines. The papers demonstrate the continuing and healthy interest in the development of understanding of new methodologies and implementation in terms of new instrumentation. The prime objective of the Tenth Symposium was to provide a forum for the presentation of the most advanced research on laser techniques for flow measurements, and communicate significant results to fluid mechanics. The application of laser techniques to scientific and engineering fluid flow research was emphasized, but contributions to the theory and practice of laser methods were also considered where they facilita...

  9. Flameless Combustion Workshop

    National Research Council Canada - National Science Library

    Gutmark, Ephraim

    2005-01-01

    .... "Flameless Combustion" is characterized by high stability levels with virtually no thermoacoustic instabilities, very low lean stability limits and therefore extremely low NOx production, efficient...

  10. Research Combustion Laboratory (RCL)

    Data.gov (United States)

    Federal Laboratory Consortium — The Research Combustion Laboratory (RCL) develops aerospace propulsion technology by performing tests on propulsion components and materials. Altitudes up to 137,000...

  11. Combustion Byproducts Recycling Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Paul Ziemkiewicz; Tamara Vandivort; Debra Pflughoeft-Hassett; Y. Paul Chugh; James Hower

    2008-08-31

    Ashlines: To promote and support the commercially viable and environmentally sound recycling of coal combustion byproducts for productive uses through scientific research, development, and field testing.

  12. Microscale combustion and power generation

    CERN Document Server

    Cadou, Christopher; Ju, Yiguang

    2014-01-01

    Recent advances in microfabrication technologies have enabled the development of entirely new classes of small-scale devices with applications in fields ranging from biomedicine, to wireless communication and computing, to reconnaissance, and to augmentation of human function. In many cases, however, what these devices can actually accomplish is limited by the low energy density of their energy storage and conversion systems. This breakthrough book brings together in one place the information necessary to develop the high energy density combustion-based power sources that will enable many of these devices to realize their full potential. Engineers and scientists working in energy-related fields will find: An overview of the fundamental physics and phenomena of microscale combustion; Presentations of the latest modeling and simulation techniques for gasphase and catalytic micro-reactors; The latest results from experiments in small-scale liquid film, microtube, and porous combustors, micro-thrusters, a...

  13. SPECIFIC EMISSIONS FROM BIOMASS COMBUSTION

    Directory of Open Access Journals (Sweden)

    Pavel Skopec

    2014-02-01

    Full Text Available This paper deals with determining the specific emissions from the combustion of two kinds of biomass fuels in a small-scale boiler. The tested fuels were pellets made of wood and pellets made of rape plant straw. In order to evaluate the specific emissions, several combustion experiments were carried out using a commercial 25 kW pellet-fired boiler. The specific emissions of CO, SO2 and NOx were evaluated in relation to a unit of burned fuel, a unit of calorific value and a unit of produced heat. The specific emissions were compared with some data acquired from the reference literature, with relatively different results. The differences depend mainly on the procedure used for determining the values, and references provide no information about this. Although some of our experimental results may fit with one of the reference sources, they do not fit with the other. The reliability of the references is therefore disputable.

  14. Specifics of phytomass combustion in small experimental device

    Science.gov (United States)

    Lenhard, Richard; Mičieta, Jozef; Jandačka, Jozef; Gavlas, Stanislav

    2015-05-01

    A wood pellet combustion carries out with high efficiency and comfort in modern pellet boilers. These facts help to increase the amount of installed pellet boilers in households. The combustion process quality depends besides the combustion conditions also on the fuel quality. The wood pellets, which don`t contain the bark and branches represent the highest quality. Because of growing pellet demand, an herbal biomass (phytomass), which is usually an agricultural by-product becomes economically attractive for pellet production. Although the phytomass has the net calorific value relatively slightly lower than the wood biomass, it is often significantly worse in view of the combustion process and an emission production. The combustion of phytomass pellets causes various difficulties in small heat sources, mainly due to a sintering of fuel residues. We want to avoid the ash sintering by a lowering of temperature in the combustion chamber below the ash sintering temperature of phytomass via the modification of a burner design. For research of the phytomass combustion process in the small boilers is constructed the experimental combustion device. There will investigate the impact of cooling intensity of the combustion chamber on the combustion process and emissions. Arising specific requirements from the measurement will be the basis for the design of the pellet burner and for the setting of operating parameters to the trouble-free phytomass combustion was guaranteed.

  15. Specifics of phytomass combustion in small experimental device

    Directory of Open Access Journals (Sweden)

    Lenhard Richard

    2015-01-01

    Full Text Available A wood pellet combustion carries out with high efficiency and comfort in modern pellet boilers. These facts help to increase the amount of installed pellet boilers in households. The combustion process quality depends besides the combustion conditions also on the fuel quality. The wood pellets, which don`t contain the bark and branches represent the highest quality. Because of growing pellet demand, an herbal biomass (phytomass, which is usually an agricultural by-product becomes economically attractive for pellet production. Although the phytomass has the net calorific value relatively slightly lower than the wood biomass, it is often significantly worse in view of the combustion process and an emission production. The combustion of phytomass pellets causes various difficulties in small heat sources, mainly due to a sintering of fuel residues. We want to avoid the ash sintering by a lowering of temperature in the combustion chamber below the ash sintering temperature of phytomass via the modification of a burner design. For research of the phytomass combustion process in the small boilers is constructed the experimental combustion device. There will investigate the impact of cooling intensity of the combustion chamber on the combustion process and emissions. Arising specific requirements from the measurement will be the basis for the design of the pellet burner and for the setting of operating parameters to the trouble-free phytomass combustion was guaranteed.

  16. Combustion Stratification for Naphtha from CI Combustion to PPC

    KAUST Repository

    Vallinayagam, R.; Vedharaj, S.; An, Yanzhao; Dawood, Alaaeldin; Izadi Najafabadi, Mohammad; Somers, Bart; Johansson, Bengt

    2017-01-01

    This study demonstrates the combustion stratification from conventional compression ignition (CI) combustion to partially premixed combustion (PPC). Experiments are performed in an optical CI engine at a speed of 1200 rpm for diesel and naphtha (RON

  17. A shift in emission time profiles of fossil fuel combustion due to energy transitions impacts source receptor matrices for air quality.

    Science.gov (United States)

    Hendriks, Carlijn; Kuenen, Jeroen; Kranenburg, Richard; Scholz, Yvonne; Schaap, Martijn

    2015-03-01

    Effective air pollution and short-lived climate forcer mitigation strategies can only be designed when the effect of emission reductions on pollutant concentrations and health and ecosystem impacts are quantified. Within integrated assessment modeling source-receptor relationships (SRRs) based on chemistry transport modeling are used to this end. Currently, these SRRs are made using invariant emission time profiles. The LOTOS-EUROS model equipped with a source attribution module was used to test this assumption for renewable energy scenarios. Renewable energy availability and thereby fossil fuel back up are strongly dependent on meteorological conditions. We have used the spatially and temporally explicit energy model REMix to derive time profiles for backup power generation. These time profiles were used in LOTOS-EUROS to investigate the effect of emission timing on air pollutant concentrations and SRRs. It is found that the effectiveness of emission reduction in the power sector is significantly lower when accounting for the shift in the way emissions are divided over the year and the correlation of emissions with synoptic situations. The source receptor relationships also changed significantly. This effect was found for both primary and secondary pollutants. Our results indicate that emission timing deserves explicit attention when assessing the impacts of system changes on air quality and climate forcing from short lived substances.

  18. Coal-water slurry fuel internal combustion engine and method for operating same

    Science.gov (United States)

    McMillian, Michael H.

    1992-01-01

    An internal combustion engine fueled with a coal-water slurry is described. About 90 percent of the coal-water slurry charge utilized in the power cycle of the engine is directly injected into the main combustion chamber where it is ignited by a hot stream of combustion gases discharged from a pilot combustion chamber of a size less than about 10 percent of the total clearance volume of main combustion chamber with the piston at top dead center. The stream of hot combustion gases is provided by injecting less than about 10 percent of the total coal-water slurry charge into the pilot combustion chamber and using a portion of the air from the main combustion chamber that has been heated by the walls defining the pilot combustion chamber as the ignition source for the coal-water slurry injected into the pilot combustion chamber.

  19. Crispy Cracks Symposium Explores Crispness and Water Management

    NARCIS (Netherlands)

    Hamer, R.J.; Vliet, van T.

    2008-01-01

    This article provides an overview of the first international symposium on crispness creation and retention. The symposium, entitled, ¿Crispy Cracks Symposium,¿ was organized by Cereals & Europe and TI Food and Nutrition. The symposium contained three sessions: 1) Crispiness¿The Fundamentals; 2)

  20. Symposium on Differential Geometry and Differential Equations

    CERN Document Server

    Berger, Marcel; Bryant, Robert

    1987-01-01

    The DD6 Symposium was, like its predecessors DD1 to DD5 both a research symposium and a summer seminar and concentrated on differential geometry. This volume contains a selection of the invited papers and some additional contributions. They cover recent advances and principal trends in current research in differential geometry.

  1. Conserving biodiversity on native rangelands: Symposium proceedings

    Science.gov (United States)

    Daniel W. Uresk; Greg L. Schenbeck; James T. O' Rourke

    1997-01-01

    These proceedings are the result of a symposium, "Conserving biodiversity on native rangelands" held on August 17, 1995 in Fort Robinson State Park, NE. The purpose of this symposium was to provide a forum to discuss how elements of rangeland biodiversity are being conserved today. We asked, "How resilient and sustainable are rangeland systems to the...

  2. 4th International Language Management Symposium

    Czech Academy of Sciences Publication Activity Database

    Prošek, Martin

    2016-01-01

    Roč. 77, č. 3 (2016), s. 233-240 ISSN 0037-7031. [international language management symposium] Institutional support: RVO:68378092 Keywords : language management theory * international language symposium * language management Subject RIV: AI - Linguistics OBOR OECD: Linguistics Impact factor: 0.625, year: 2016

  3. 6th European symposium on uroradiology

    International Nuclear Information System (INIS)

    Bujlov, V.M.

    1999-01-01

    Materials of the 6th European symposium on uroradiology held in Strasbourg (France) in September, 1998. Symposium topics included problems of radiological diagnosis of kidneys, renovascular hypertension, man and woman sterility, pelvis organs of men and women, functional studies of lower urinary tract, pediatric and interventional uroradiology. Great attention is paid to magnetic resonance tomography, ultrasonography and conventional biomedical radiography [ru

  4. HEAO Science Symposium

    Science.gov (United States)

    Dailey, C. (Editor); Johnson, W. (Editor)

    1979-01-01

    Scientific results from the early analysis of data from the HEAO 1 mission are presented. Development of astronomical catalogs and maps, X-ray variability, extragalactic astronomy, X-ray iron line emission, and optical identification and spectroscopy of X-ray sources are among the topics discussed. Results from HEAO 2 imaging and nonimaging instruments are included.

  5. Strobes: An oscillatory combustion

    NARCIS (Netherlands)

    Corbel, J.M.L.; Lingen, J.N.J. van; Zevenbergen, J.F.; Gijzeman, O.L.J.; Meijerink, A.

    2012-01-01

    Strobe compositions belong to the class of solid combustions. They are mixtures of powdered ingredients. When ignited, the combustion front evolves in an oscillatory fashion, and flashes of light are produced by intermittence. They have fascinated many scientists since their discovery at the

  6. Catalytically enhanced combustion process

    International Nuclear Information System (INIS)

    Rodriguez, C.

    1992-01-01

    This patent describes a fuel having improved combustion efficiency. It comprises a petroleum based liquid hydrocarbon; and a combustion catalyst comprising from about 18 to about 21 weight percent naphthalene, from about 75 to about 80 weight percent toluene, and from about 2.8 to about 3.2 weight percent benzyl alcohol

  7. Fifteenth combustion research conference

    International Nuclear Information System (INIS)

    1993-01-01

    The BES research efforts cover chemical reaction theory, experimental dynamics and spectroscopy, thermodynamics of combustion intermediates, chemical kinetics, reaction mechanisms, combustion diagnostics, and fluid dynamics and chemically reacting flows. 98 papers and abstracts are included. Separate abstracts were prepared for the papers

  8. 14. European cosmic ray symposium. Symposium program and abstracts

    International Nuclear Information System (INIS)

    1994-08-01

    The abstracts of the 14. European Cosmic Ray Symposium are presented. The papers cover a large variety of topics in cosmic ray physics, both from the theoretical and the experimental point of view. Sun physics, and the effects on the inner heliosphere, the composition, and the properties of the primary and secondary cosmic radiation, galactic acceleration and the results of accelerator physics relevant to cosmic radiation physics, and the description and the results of large detector systems are presented. 63 items are indexed for INIS database. (K.A.)

  9. Fuels and Combustion

    KAUST Repository

    Johansson, Bengt

    2016-08-17

    This chapter discusses the combustion processes and the link to the fuel properties that are suitable for them. It describes the basic three concepts, including spark ignition (SI) and compression ignition (CI), and homogeneous charge compression ignition (HCCI). The fuel used in a CI engine is vastly different from that in an SI engine. In an SI engine, the fuel should sustain high pressure and temperature without autoignition. Apart from the dominating SI and CI engines, it is also possible to operate with a type of combustion: autoignition. With HCCI, the fuel and air are fully premixed before combustion as in the SI engine, but combustion is started by the increased pressure and temperature during the compression stroke. Apart from the three combustion processes, there are also a few combined or intermediate concepts, such as Spark-Assisted Compression Ignition (SACI). Those concepts are discussed in terms of the requirements of fuel properties.

  10. Fuels and Combustion

    KAUST Repository

    Johansson, Bengt

    2016-01-01

    This chapter discusses the combustion processes and the link to the fuel properties that are suitable for them. It describes the basic three concepts, including spark ignition (SI) and compression ignition (CI), and homogeneous charge compression ignition (HCCI). The fuel used in a CI engine is vastly different from that in an SI engine. In an SI engine, the fuel should sustain high pressure and temperature without autoignition. Apart from the dominating SI and CI engines, it is also possible to operate with a type of combustion: autoignition. With HCCI, the fuel and air are fully premixed before combustion as in the SI engine, but combustion is started by the increased pressure and temperature during the compression stroke. Apart from the three combustion processes, there are also a few combined or intermediate concepts, such as Spark-Assisted Compression Ignition (SACI). Those concepts are discussed in terms of the requirements of fuel properties.

  11. Restoration of environments with radioactive residues. Papers and discussions. Proceedings of an international symposium

    International Nuclear Information System (INIS)

    2000-01-01

    After the use of radioactive substances or the application of nuclear energy, radioactive residues may remain in the environment and may give rise to radiation exposure of people. Radioactive residues can originate from several sources. They may be remnants following the termination of a practice such as the decommissioning of a nuclear power plant. Occasionally, residues can derive from the accumulation of radionuclides from normal discharges to the environment of radioactive effluents from practices. Most commonly, they are the result of human activities that have been performed in the past without proper regard for the current international radiation protection requirements. They can also be the consequence of accidents that have released radioactive material to the environment. Radioactive residues are also generated by nature, e.g. in natural deposits of radioactive material found in the earth. Spring waters convey these materials. No matter what the cause of radioactive residues may be, there is the question of whether any restoration of the affected environment is required and, if so, to what extent it should be performed. The International Symposium on Restoration of Environments with Radioactive Residues was devoted to discussing these questions and to fostering the exchange of information on this subject. The Symposium explored five main topics: global overview of the problem; restoration principles and criteria; case studies of actual radiological assessments; a critical analysis of the case studies; and the role of public participation in the decision aiding and decision making processes. The Programme Committee of the Symposium accepted a number of contributed papers and posters for consideration at the Symposium, and these were published shortly before the Symposium. In early 2000, the IAEA released as Working Material a draft, unedited compilation of the present Proceedings Series publication. The present publication, which constitutes the record of

  12. PDF Modeling of Turbulent Combustion

    National Research Council Canada - National Science Library

    Pope, Stephen B

    2006-01-01

    .... The PDF approach to turbulent combustion has the advantages of fully representing the turbulent fluctuations of species and temperature, and of allowing realistic combustion chemistry to be implemented...

  13. Impacts of Combustion Conditions and Photochemical Processing on the Light Absorption of Biomass Combustion Aerosol.

    Science.gov (United States)

    Martinsson, J; Eriksson, A C; Nielsen, I Elbæk; Malmborg, V Berg; Ahlberg, E; Andersen, C; Lindgren, R; Nyström, R; Nordin, E Z; Brune, W H; Svenningsson, B; Swietlicki, E; Boman, C; Pagels, J H

    2015-12-15

    The aim was to identify relationships between combustion conditions, particle characteristics, and optical properties of fresh and photochemically processed emissions from biomass combustion. The combustion conditions included nominal and high burn rate operation and individual combustion phases from a conventional wood stove. Low temperature pyrolysis upon fuel addition resulted in "tar-ball" type particles dominated by organic aerosol with an absorption Ångström exponent (AAE) of 2.5-2.7 and estimated Brown Carbon contributions of 50-70% to absorption at the climate relevant aethalometer-wavelength (520 nm). High temperature combustion during the intermediate (flaming) phase was dominated by soot agglomerates with AAE 1.0-1.2 and 85-100% of absorption at 520 nm attributed to Black Carbon. Intense photochemical processing of high burn rate flaming combustion emissions in an oxidation flow reactor led to strong formation of Secondary Organic Aerosol, with no or weak absorption. PM1 mass emission factors (mg/kg) of fresh emissions were about an order of magnitude higher for low temperature pyrolysis compared to high temperature combustion. However, emission factors describing the absorption cross section emitted per kg of fuel consumed (m(2)/kg) were of similar magnitude at 520 nm for the diverse combustion conditions investigated in this study. These results provide a link between biomass combustion conditions, emitted particle types, and their optical properties in fresh and processed plumes which can be of value for source apportionment and balanced mitigation of biomass combustion emissions from a climate and health perspective.

  14. 6th Asian Physics Symposium

    International Nuclear Information System (INIS)

    2016-01-01

    Preface: The 6th Asian Physics Symposium 2015 (APS 2015) The 6th Asian Physics Symposium 2015 (APS 2015) is organized by the Physics Department, Faculty of Mathematics and Natural Sciences, Bandung Institute of Technology, in collaboration with HFI (Indonesian Physical Society), PAPSI (Physics and Applied Physics Society of Indonesia), HANI (Indonesian Nuclear Scientist Society), HRMI (Indonesian Material Research Society), HAGI (Indonesian Geophysicist Society) - West Java Chapter, and HFMBI (Indonesian Medical Physicist and Biophysicist Society). APS 2015 is aimed at providing a forum of scientific communication and interaction among distinguished scientists working in physics and its related fields. In this scientific event the latest research will be presented, and state-of-the-art developments in the field discussed, to help to guide our future research directions. It is also designed to offer the opportunity for young Indonesian scientists and students to make direct contacts with well-known scientists abroad and thereby foster the existing research collaborations and extend international research networking for the future. The scope of research presented and discussed in this symposium covers theoretical high energy physics, materials sciences and technology, biophysics and medical physics, nuclear science and engineering, earth and planetary sciences, computational physics, instrumentation and measurement, physics education, and interdisciplinary physics. The program of APS 2016 features 6 invited talks and 208 contributed oral presentations, which come from 7 different countries: Japan, South Korea, Singapore, Malaysia, Iraq, Ethiopia, and Indonesia. All papers have been reviewed after they are presented in this event. Selected papers are published in this Institute of Physics (IoP) Conference Series. Finally, I would like to express my sincere appreciation to all of authors for their valuable contributions and also to the members of the committee for

  15. Aarhus Regenerative Orthopaedics Symposium (AROS)

    DEFF Research Database (Denmark)

    Foldager, Casper B.; Bendtsen, Michael; Berg, Lise C.

    2016-01-01

    to musculoskeletal pain and disability. The Aarhus Regenerative Orthopaedics Symposium (AROS) 2015 was motivated by the need to address regenerative challenges in an ageing population by engaging clinicians, basic scientists, and engineers. In this position paper, we review our contemporary understanding of societal......, patient-related, and basic science-related challenges in order to provide a reasoned roadmap for the future to deal with this compelling and urgent healthcare problem. © 2017 The Author(s). Published by Taylor & Francis on behalf of the Nordic Orthopedic Federation....

  16. Third symposium on underground mining

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-01-01

    The Third Symposium on Underground Mining was held at the Kentucky Fair and Exposition Center, Louisville, KY, October 18--20, 1977. Thirty-one papers have been entered individually into EDB and ERA. The topics covered include mining system (longwall, shortwall, room and pillar, etc.), mining equipment (continuous miners, longwall equipment, supports, roof bolters, shaft excavation equipment, monitoring and control systems. Maintenance and rebuilding facilities, lighting systems, etc.), ventilation, noise abatement, economics, accidents (cost), dust control and on-line computer systems. (LTN)

  17. Stanford Lepton-Photon Symposium

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1989-10-15

    With CERN's new LEP electron-positron collider poised to make its physics debut, the physics at the 14th International Symposium on Lepton and Photon Interactions, held at Stanford from 7-12 August, featured a ripple of new results on the Z and W bosons, the carriers of respectively the electrically neutral and charged components of the weak nuclear force. These new W and Z results, combined with refined measurements in other sectors, have interesting implications for expected but as yet unseen particles, notably the sixth ('top') quark.

  18. Proceedings of the 1980 symposium on instrumentation and control for fossil energy processes

    Energy Technology Data Exchange (ETDEWEB)

    Doering, R.W. (comp.)

    1980-01-01

    The 1980 symposium on Instrumentation and Control for Fossil Energy Processes was held June 9-11, 1980, New Cavalier, Virginia Beach, Virginia. It was sponsored by the Argonne National Laboratory and the US Department of Energy, Office of Fossil Energy. Forty-five papers have been entered individually into EDB and ERA; nine papers had been entered previously from other sources. (LTN)

  19. Introduction to the Symposium on Post-Keynesian and Feminist Economics

    NARCIS (Netherlands)

    I.P. van Staveren (Irene); C. Danby (Colin)

    2010-01-01

    textabstractThe papers in this symposium treat feminist economics as a source of foundational insight and critique. They extend a dialogue between the feminist and post-Keynesian literatures on questions of theory, method, epistemology and ontology. Dialogues across literatures raise questions of

  20. International Ocean Symposium (IOS) 1996; Kokusai kaiyo symposium 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-18

    This is a proceedings of the International Ocean Symposium 1996. On the first day of the symposium, the following were given with a theme `The Ocean, Can She Save Us`: Underwater research and future of mankind as a commemorative speech; The ocean, can she save us -- trying to discover the true figure of the ocean as a keynote speech. Panel discussion was held on The global environment and the infinite potential of the ocean. On the second day, an approach was made mostly from a cultural aspect with a theme `The Ocean and the Japanese.` The following were given: Human links between east and west as a commemorative speech; The ocean and Japanese culture as a keynote speech; Civilization spanning across oceans as a panel discussion. The Japanese have been developing their individual technologies in shipbuilding, shipping, and ocean development, have been raised by Mother Ocean, and have lived together. Ocean has been supplying humans food, water, oxygen, marine routes, and even dream and hope. The environmental pollution is the result of the human greediness. It is fear and friendship between humans and ocean that can save humans and ocean.

  1. Fuel Combustion Laboratory | Transportation Research | NREL

    Science.gov (United States)

    Fuel Combustion Laboratory Fuel Combustion Laboratory NREL's Fuel Combustion Laboratory focuses on designs, using both today's technology and future advanced combustion concepts. This lab supports the combustion chamber platform for fuel ignition kinetics research, was acquired to expand the lab's

  2. Formation of fuel NOx during black-liquor combustion

    International Nuclear Information System (INIS)

    Nichols, K.M.; Lien, S.J.

    1993-01-01

    Fuel NOx and thermal NOx were measured in combustion gases from black liquors in two laboratory furnaces. Combustion at 950 C in air (8% O 2 ) produced NOx concentrations of 40-80ppm. Combustion at 950 C in synthetic air containing no nitrogen (21% 0 2 in Ar) produced the same result, demonstrating that all of the NOx produced during combustion at 950 C was fuel NOx. Formation of fuel NOx increased moderately with increasing temperature in the range of 800-1,000 C, but temperature sensitivity of fuel NOx was much less than that of thermal NOx. The results imply that the major source of NOx in recovery furnace emissions is the fuel NOx in recovery furnace formed by conversion of liquor-bound nitrogen during combustion. This is consistent with thermal NOx theory, which postulates that black-liquor combustion temperatures are too low to generate significant amounts of thermal NOx

  3. The composition of matter symposium honouring Johannes Geiss on the occasion of his 80th birthday

    CERN Document Server

    Gloeckler, George; Mason, G M

    2007-01-01

    This volume consists of papers developed from a joint ACE/ISSI symposium on the "Composition of Matter" honoring the occasion of Johannes Geiss's 80th birthday. The reader will find new insights into the composition of solar-system and galactic matter and fractionation processes affecting samples of this matter. These findings are based on measurements by recent space instruments, ground-based studies, and theoretical advances. The five symposium sessions reflect the areas of research presented in this book: linking primordial to solar composition, planetary samples, solar sources and fractionation processes, interstellar gas, and cosmic rays. The structure of the volume at hand largely follows the structure of the symposium. It includes almost all of the overview and invited papers and many of the contributed ones.

  4. XI International Symposium on Radiation from Relativistic Electrons in Periodic Structures (RREPS2015)

    International Nuclear Information System (INIS)

    2016-01-01

    These Proceedings are published as a recollection of contributions presented at the XI International Symposium on “Radiation from Relativistic Electrons in Periodic Structures” (RREPS-15), which was held in Saint Petersburg, September 6-11, 2015, Russian Federation. RREPS-15 was co-organized by Saint-Petersburg State University, National Research Tomsk Polytechnic University, and National Research Nuclear University (MEPhI). The main goal of the symposium was to bring together the scientists from around the world who work on designs of new radiation sources and their applications. There were 108 participants registered from 12 countries. The website of the symposium is available at http://rreps.tpu.ru/. (paper)

  5. Motor vehicles and internal combustion engines; Kraftfahrwesen und Verbrennungsmotoren

    Energy Technology Data Exchange (ETDEWEB)

    Bargende, M.; Wiedemann, J. [eds.

    1999-07-01

    The book comprises the papers presented at the 3rd Stuttgart symposium. It reviews the state of the art in science and engineering and outlines future perspectives in the fields of motor vehicles and internal combustion engines. As the conference, the book comprises three sections: 'Engines' on DI spark ignition engines and diesel engines, mixing, combustion and exhaust purification. 'Motor cars' discusses acoustics and aeroacoustics, aerodynamics and wind tunnel technology, comfort, driving gear and stability control. 'Motor vehicle systems' contains papers on thermomanagement, control and automation, real-time applications in motor car simulation, software tools in the control systems development process, and simulation in motor vehicle systems development. Finally, the plenary paper 'Fuel cells, a solution for non-polluting motor car drives' by Dr.-Ing. F. Panik is also contained in the book. [German] Das vorliegende Buch enthaelt die Vortraege des 3. Stuttgarter Symposiums. Es gibt einen Ueberblick ueber den aktuellen Stand von Wissenschaft und Technik und zeigt zukuenftige Perspektiven im Bereich Kraftfahrwesen und Verbrennungsmotoren. Entsprechend der Tagung gliedert sich das Buch in drei Teile. Teil 1 'Motoren' besteht aus Vortraegen ueber Ottomotoren mit Direkteinspritzung und Dieselmotoren, Gemischbildung, Verbrennung und Abgasnachbehandlung, Analyse, Simulation und Motorkomponenten. Teil 2 'Kraftfahrzeuge' enthaelt Arbeiten ueber Fahrzeugakustik und Aeroakustik, Fahrzeug-Aerodynamik und Windkanaltechnik, Fahrzeugkomfort, Fahrwerk und Fahrdynamik. Teil 3 'Kraftfahrzeugsystemtechnik' enthaelt Beitraege ueber Thermomanagement, Regelungs- und Automatisierungstechnik, Echtzeitanwendungen in der Kfz-Simulationstechnik, Softwaretools im Steuergeraete-Entwicklungsprozess und Simulation in der Kraftfahrzeug-Systementwicklung. Der abschliessende Plenarvortrag des Symposiums &apos

  6. Determination of primary combustion source organic carbon-to-elemental carbon (OC / EC ratio using ambient OC and EC measurements: secondary OC-EC correlation minimization method

    Directory of Open Access Journals (Sweden)

    C. Wu

    2016-05-01

    Full Text Available Elemental carbon (EC has been widely used as a tracer to track the portion of co-emitted primary organic carbon (OC and, by extension, to estimate secondary OC (SOC from ambient observations of EC and OC. Key to this EC tracer method is to determine an appropriate OC / EC ratio that represents primary combustion emission sources (i.e., (OC / ECpri at the observation site. The conventional approaches include regressing OC against EC within a fixed percentile of the lowest (OC / EC ratio data (usually 5–20 % or relying on a subset of sampling days with low photochemical activity and dominated by local emissions. The drawback of these approaches is rooted in its empirical nature, i.e., a lack of clear quantitative criteria in the selection of data subsets for the (OC / ECpri determination. We examine here a method that derives (OC / ECpri through calculating a hypothetical set of (OC / ECpri and SOC followed by seeking the minimum of the coefficient of correlation (R2 between SOC and EC. The hypothetical (OC / ECpri that generates the minimum R2(SOC,EC then represents the actual (OC / ECpri ratio if variations of EC and SOC are independent and (OC / ECpri is relatively constant in the study period. This Minimum R Squared (MRS method has a clear quantitative criterion for the (OC / ECpri calculation. This work uses numerically simulated data to evaluate the accuracy of SOC estimation by the MRS method and to compare with two commonly used methods: minimum OC / EC (OC / ECmin and OC / EC percentile (OC / EC10 %. Log-normally distributed EC and OC concentrations with known proportion of SOC are numerically produced through a pseudorandom number generator. Three scenarios are considered, including a single primary source, two independent primary sources, and two correlated primary sources. The MRS method consistently yields the most accurate SOC estimation. Unbiased SOC estimation by OC

  7. 6th interventional MRI symposium. Abstracts

    International Nuclear Information System (INIS)

    2006-01-01

    The ongoing progress in the field of interventional MRI and the great success of our last symposium 2004 in Boston have stimulated us to organize the 6th Interventional MRI Symposium to be held September 15-16, 2006 in Leipzig. This meeting will highlight ground-breaking research as well as cutting-edge reports from many groups. The symposium also provides a forum to network with leaders and innovators in the field. Session topics are: intraoperative MRI, vascular applications, targeted drug delivery, cryotherapy, thermometry, pulse sequences, LITT, percutaneous procedures, navigation, robotics, focused ultrasound. (uke)

  8. 10th German nuclear law symposium

    International Nuclear Information System (INIS)

    Koch, H.J.; Rossnagel, A.

    2000-01-01

    This 10th symposium on nuclear law in Germany was held eight years after the 9th symposium. Due to the change of government after the last general elections, there had been a turnaround in Germany's energy policy. 'Phasing out nuclear energy' was the major strategy of the new Federal Government. The topics of the papers presented at the symposium therefore focus on: a new time frame for NPP shutdown and termination of operating licences; ensuring the safe operation of nuclear power plants for the remaining operating periods; new concepts for radwaste management and ultimate disposal. (orig./CB) [de

  9. 6{sup th} interventional MRI symposium. Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The ongoing progress in the field of interventional MRI and the great success of our last symposium 2004 in Boston have stimulated us to organize the 6th Interventional MRI Symposium to be held September 15-16, 2006 in Leipzig. This meeting will highlight ground-breaking research as well as cutting-edge reports from many groups. The symposium also provides a forum to network with leaders and innovators in the field. Session topics are: intraoperative MRI, vascular applications, targeted drug delivery, cryotherapy, thermometry, pulse sequences, LITT, percutaneous procedures, navigation, robotics, focused ultrasound. (uke)

  10. 6th international symposium on finite volumes for complex applications

    CERN Document Server

    Halama, Jan; Herbin, Raphaèle; Hubert, Florence; Fort, Jaroslav; FVCA 6; Finite Volumes for Complex Applications VI : Problems and perspectives

    2011-01-01

    Finite volume methods are used for various applications in fluid dynamics, magnetohydrodynamics, structural analysis or nuclear physics. A closer look reveals many interesting phenomena and mathematical or numerical difficulties, such as true error analysis and adaptivity, modelling of multi-phase phenomena or fitting problems, stiff terms in convection/diffusion equations and sources. To overcome existing problems and to find solution methods for future applications requires many efforts and always new developments. The goal of The International Symposium on Finite Volumes for Complex Applica

  11. II. symposium of radiological physicists with international participation

    International Nuclear Information System (INIS)

    1986-01-01

    The symposium proceedings contains 40 brief abstracts of presented papers. The session on treatment planning heard papers on the preparation of patients, calculations of the radiation field, optimization of procedures and computer-aided control of the irradiation process; the session on clinical dosimetry dealt with the techniques of dosimetry in different irradiation procedures; the session on equipment and quality assurance in radiotherapy discussed experience with the use of accelerator and other sources and their calibration; the session on radiation protection problems dealt with the measurement of absorbed dose in the vicinity of the irradiated patient and with spectrometry; a further session dealt with biological problems in radiotherapy. (M.D.)

  12. Annual Symposium in Electronics Packaging

    CERN Document Server

    1991-01-01

    Each May, the Continuing Education Division of the T.J.Watson School of Engineering, Applied Science and Technology at the State University of New York at Binghamton sponsors an Annual Symposium in Electronics Packaging in cooperation with local professional societies (IEEE, ASME, SME, IEPS) and UnlPEG (the University-Industry Partnership for Economic Growth.) Each volume of this Electronics Packaging Forum series is based on the the preceding Symposium, with Volume Two based on the 1990 presentations. The Preface to Volume One included a brief definition of the broad scope of the electronics packaging field with some comments on why it has recently assumed such a more prominent priority for research and development. Those remarks will not be repeated here; at this point it is assumed that the reader is a professional in the packaging field, or possibly a student of one of the many academic disciplines which contribute to it. It is worthwhile repeating the series objectives, however, so the reader will be cle...

  13. 2015 International Symposium in Statistics

    CERN Document Server

    2016-01-01

    This proceedings volume contains eight selected papers that were presented in the International Symposium in Statistics (ISS) 2015 On Advances in Parametric and Semi-parametric Analysis of Multivariate, Time Series, Spatial-temporal, and Familial-longitudinal Data, held in St. John’s, Canada from July 6 to 8, 2015. The main objective of the ISS-2015 was the discussion on advances and challenges in parametric and semi-parametric analysis for correlated data in both continuous and discrete setups. Thus, as a reflection of the theme of the symposium, the eight papers of this proceedings volume are presented in four parts. Part I is comprised of papers examining Elliptical t Distribution Theory. In Part II, the papers cover spatial and temporal data analysis. Part III is focused on longitudinal multinomial models in parametric and semi-parametric setups. Finally Part IV concludes with a paper on the inferences for longitudinal data subject to a challenge of important covariates selection from a set of large num...

  14. NITROUS OXIDE EMISSIONS FROM FOSSIL FUEL COMBUSTION

    Science.gov (United States)

    The role of coal combustion as a significant global source of nitrous oxide (N2O) emissions was reexamined through on-line emission measurements from six pulverized-coal-fired utility boilers and from laboratory and pilot-scale combustors. The full-scale utility boilers yielded d...

  15. Sandia Combustion Research: Technical review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    This report contains reports from research programs conducted at the Sandia Combustion Research Facility. Research is presented under the following topics: laser based diagnostics; combustion chemistry; reacting flow; combustion in engines and commercial burners; coal combustion; and industrial processing. Individual projects were processed separately for entry onto the DOE databases.

  16. Shale oil combustion

    International Nuclear Information System (INIS)

    Al-dabbas, M.A.

    1992-05-01

    A 'coutant' carbon steel combustion chamber cooled by water jacket was conslructed to burn diesel fuel and mixlure of shale oil and diesel fuels. During experimental work nir fuel ratio was determined, temperaturces were measured using Chromel/ Almel thermocouple, finally the gasous combustion product analysis was carricd out using gas chromatograph technique. The constructed combustion chamber was operating salisfactory for several hours of continous work. According to the measurements it was found that: the flame temperature of a mixture of diesel and shale oil fuels was greater than the flame temperature of diesel fuel. and the sulfer emissious of a mixture of diesel and shale oil fuels was higher than that of diesel fuel. Calculation indicated that the dry gas energy loss was very high and the incomplete combustion energy loss very small. (author). 23 refs., 35 figs

  17. Shale oil combustion

    Energy Technology Data Exchange (ETDEWEB)

    Al-dabbas, M A

    1992-05-01

    A `coutant` carbon steel combustion chamber cooled by water jacket was conslructed to burn diesel fuel and mixlure of shale oil and diesel fuels. During experimental work nir fuel ratio was determined, temperaturces were measured using Chromel/ Almel thermocouple, finally the gasous combustion product analysis was carricd out using gas chromatograph technique. The constructed combustion chamber was operating salisfactory for several hours of continous work. According to the measurements it was found that: the flame temperature of a mixture of diesel and shale oil fuels was greater than the flame temperature of diesel fuel. and the sulfer emissious of a mixture of diesel and shale oil fuels was higher than that of diesel fuel. Calculation indicated that the dry gas energy loss was very high and the incomplete combustion energy loss very small. (author). 23 refs., 35 figs.

  18. Sandia Combustion Research Program

    Energy Technology Data Exchange (ETDEWEB)

    Johnston, S.C.; Palmer, R.E.; Montana, C.A. (eds.)

    1988-01-01

    During the late 1970s, in response to a national energy crisis, Sandia proposed to the US Department of Energy (DOE) a new, ambitious program in combustion research. Shortly thereafter, the Combustion Research Facility (CRF) was established at Sandia's Livermore location. Designated a ''user facility,'' the charter of the CRF was to develop and maintain special-purpose resources to support a nationwide initiative-involving US inventories, industry, and national laboratories--to improve our understanding and control of combustion. This report includes descriptions several research projects which have been simulated by working groups and involve the on-site participation of industry scientists. DOE's Industry Technology Fellowship program, supported through the Office of Energy Research, has been instrumental in the success of some of these joint efforts. The remainder of this report presents results of calendar year 1988, separated thematically into eleven categories. Referred journal articles appearing in print during 1988 and selected other publications are included at the end of Section 11. Our traditional'' research activities--combustion chemistry, reacting flows, diagnostics, engine and coal combustion--have been supplemented by a new effort aimed at understanding combustion-related issues in the management of toxic and hazardous materials.

  19. Combustion driven NF3 chemical laser

    International Nuclear Information System (INIS)

    1975-01-01

    Stable, inert, non-corrosive nitrogen trifluoride gas and an inorganic source of hydrogen or deuterium gas are used as reactants in a compact combustion driven chemical laser. Nitrogen trifluoride is introduced into the combustion chamber of a chemical laser together with a hydrogen source selected from hydrogen, hydrazine, ammonia, acetylene, or benzene and the deuterated isotopes thereof and an optional inert diluent gas wherein the nitrogen trifluoride and the hydrogen- or deuterium-source gas hypergolically reacted upon heating to initiation temperature. Dissociated products from the reaction pass into a laser cavity at supersonic velocities where they are reacted with a source gas which is the isotopic opposite of the gas introduced into the combustor and which has been heated by regenerative cooling. Excited molecules of hydrogen fluoride or deuterium fluoride produce laser radiation which leaves the optical resonator cavity transversely to the flow of gases

  20. Symposium on high spin phenomena in nuclei

    International Nuclear Information System (INIS)

    1979-10-01

    Separate abstracts were prepared for 44 of the papers given at this symposium. Six other papers have already been cited in ERA; these papers can be located by reference to the entry CONF-790323 - in the Report Number Index

  1. Proceedings of the 1994 nuclear simulation symposium

    Energy Technology Data Exchange (ETDEWEB)

    Laughton, P J [ed.; Atomic Energy of Canada Ltd., Chalk River, ON (Canada). Chalk River Nuclear Labs.

    1994-12-31

    This symposium on nuclear simulation included sessions on reactor physics, on thermalhydraulics, and on fuel and fuel channels of CANDU type reactors. The individual papers have all been abstracted separately.

  2. Symposium on unsaturated flow and transport modeling

    International Nuclear Information System (INIS)

    Arnold, E.M.; Gee, G.W.; Nelson, R.W.

    1982-09-01

    This document records the proceedings of a symposium on flow and transport processes in partially saturated groundwater systems, conducted at the Battelle Seattle Research Center on March 22-24, 1982. The symposium was sponsored by the US Nuclear Regulatory Commission for the purpose of assessing the state-of-the-art of flow and transport modeling for use in licensing low-level nuclear waste repositories in partially saturated zones. The first day of the symposium centered around research in flow through partially saturated systems. Papers were presented with the opportunity for questions following each presentation. In addition, after all the talks, a formal panel discussion was held during which written questions were addressed to the panel of the days speakers. The second day of the Symposium was devoted to solute and contaminant transport in partially saturated media in an identical format. Individual papers are abstracted

  3. Symposium on unsaturated flow and transport modeling

    Energy Technology Data Exchange (ETDEWEB)

    Arnold, E.M.; Gee, G.W.; Nelson, R.W. (eds.)

    1982-09-01

    This document records the proceedings of a symposium on flow and transport processes in partially saturated groundwater systems, conducted at the Battelle Seattle Research Center on March 22-24, 1982. The symposium was sponsored by the US Nuclear Regulatory Commission for the purpose of assessing the state-of-the-art of flow and transport modeling for use in licensing low-level nuclear waste repositories in partially saturated zones. The first day of the symposium centered around research in flow through partially saturated systems. Papers were presented with the opportunity for questions following each presentation. In addition, after all the talks, a formal panel discussion was held during which written questions were addressed to the panel of the days speakers. The second day of the Symposium was devoted to solute and contaminant transport in partially saturated media in an identical format. Individual papers are abstracted.

  4. CUBE (Computer Use By Engineers) symposium abstracts

    International Nuclear Information System (INIS)

    Ruminer, J.J.

    1978-07-01

    This report presents the abstracts for the CUBE (Computer Use by Engineers) Symposium, October 4, through 6, 1978. Contributors are from Lawrence Livermore Laboratory, Los Alamos Scientific Laboratory, and Sandia Laboratories

  5. International symposium on utilization of accelerators. Proceedings

    International Nuclear Information System (INIS)

    2003-01-01

    The programme of the IAEA in the Utilization of Low Energy Accelerators is implemented through the Department of Nuclear Sciences and Applications and the Department of Technical Cooperation. One aspect of the IAEA programme is to conduct symposia to highlight new developments, promote training and transfer of technology. Particle accelerators, originally developed for basic research in nuclear physics, have matured into versatile tools for applications in other branches of science, as well as in industry and medicine. In terms of numbers, electron accelerators have achieved the greatest usage being applied routinely for tasks like polymerisation of plastics, waste and flue gas treatment and sterilization of foodstuffs and medical devices. In addition, they are in widespread use in hospitals for cancer treatment. In the electronics industry, ion accelerators are utilized for implanting atoms into the surface layer of semiconductor materials. Ion implanters are also used for hardening metallic surfaces for medical implants and bearings. In the medical field, medium energy cyclotrons are used to produce isotopes for diagnostic, as well as, therapeutic applications. Recently, there has been an increased interest in proton accelerators with energies of a few hundred MeV for the treatment of deep lying tumours. Protons deposit most of their energy near the end of their path minimizing the radiation dose to surface tissue and vital organs that must be crossed to reach the target zone. Synchrotron radiation sources utilize high energy electrons that can be contained for many hours in storage rings in conjunction with specialized magnetic systems to emit synchrotron radiation in the wavelength range from infrared to X rays. Synchrotron radiation is used increasingly in macromolecular crystallography to locate the position of atoms in large protein molecules, to facilitate the understanding of the human genome and to design new anti-viral drugs. Synchrotron based X ray

  6. Gas Emissions in Combustion of Biofuel

    Directory of Open Access Journals (Sweden)

    Vitázek Ivan

    2014-10-01

    Full Text Available Nowadays, biomass or more precisely biofuel is more and more being exploited as a substitute for fossil fuels for heating as well as for example for heating a drying environment. This contribution focuses on assessing a heat source by combusting various types of solid biofuels. It is a boiler VIGAS 25 with AK 2000 regulation for heating a family house. Gaseous emissions were measured using a device TESTO 330-2LL. Firewood, peat briquettes, bark briquettes and hardwood briquettes were burnt. Results of experimental measurements concerning the production of gaseous emissions are processed in tables and graphs depending on boiler performance and combustion time.

  7. Resonance ionization detection of combustion radicals

    Energy Technology Data Exchange (ETDEWEB)

    Cool, T.A. [Cornell Univ., Ithaca, NY (United States)

    1993-12-01

    Fundamental research on the combustion of halogenated organic compounds with emphasis on reaction pathways leading to the formation of chlorinated aromatic compounds and the development of continuous emission monitoring methods will assist in DOE efforts in the management and disposal of hazardous chemical wastes. Selective laser ionization techniques are used in this laboratory for the measurement of concentration profiles of radical intermediates in the combustion of chlorinated hydrocarbon flames. A new ultrasensitive detection technique, made possible with the advent of tunable VUV laser sources, enables the selective near-threshold photoionization of all radical intermediates in premixed hydrocarbon and chlorinated hydrocarbon flames.

  8. The 2002 Starting Artificial Intelligence Researchers Symposium

    OpenAIRE

    Vidal, Thierry

    2003-01-01

    During the 2002 European Conference on Artificial Intelligence (ECAI-02) was introduced the Starting Artificial Intelligence Researchers Symposium STAIRS), the first-ever international symposium specifically aimed at Ph.D. students in AI. The outcome was a thorough, high-quality, and successful event, with all the features one usually finds in the best international conferences: large international committees, comprehensive coverage, published proceedings, renowned speakers and panelists, sub...

  9. Welcome and introduction to symposium - Day 2

    OpenAIRE

    humanities, Symposium on Information and technology in the arts and; McLaughlin, Jeremy Lee; Matusiak, Krystyna

    2015-01-01

    Welcome and introduction slides used for presentation at Day 2 of the Virtual Symposium on Information and Technology in the Arts and Humanities, held April 22 and 23, 2015. The Symposium was co-sponsored by the ASIS&T (Association for Information Science and Technology) Special Interest Group for Arts and Humanities (SIG AH) and the Special Interest Group for Visualization, Images, and Sound (SIG VIS).

  10. XXXIX Symposium on Nuclear Physics

    International Nuclear Information System (INIS)

    Acosta, Luis; Bijker, Roelof

    2016-01-01

    In the present volume of Journal of Physics: Conference Series we publish the proceedings of the “XXXIX Symposium on Nuclear Physics”, that was held from January 5-8, 2016 at the Hacienda Cocoyoc, Morelos, Mexico. The proceedings consist of 20 contributions that were presented as plenary talks at the meeting. The abstracts of all contributions, invited talks and posters, were published in the Conference Handbook. The Symposium on Nuclear Physics has a long and distinguished history. From the beginning it was intended to be a relatively small meeting designed to bring together some of the leading nuclear scientists in the field. Its most distinctive feature is to provide a forum for specialists in different areas of nuclear physics, both theorists and experimentalists, students, postdocs and senior scientists, in a relaxed and informal environment providing them with a unique opportunity to exchange ideas. After the first meeting in Oaxtepec in 1978, the Symposium was organized every year without interruption which makes the present one the 39th in a row. The scientific program consisted of 29 invited talks and a poster session on a wide variety of hot topics in contemporary nuclear physics, ranging from the traditional fields of nuclear structure and nuclear reactions to radioactive beams, nuclear astrophysics, hadronic physics, fundamental symmetries and relativistic heavy ions, as well as progress reports of large international projects like the HAWC Observatory in Puebla, Mexico, and the ATLAS and ALICE Collaborations of the LHC accelerator at CERN, Switzerland. In addition, there were several contributions highlighting interesting new results from foreign laboratories like Notre Dame, RIKEN, Jefferson Lab, Oak Ridge, INFN-Legnaro and INFN-LNS, as well as Mexican laboratories at ININ, LEMA and the Carlos Graef Laboratory at IF-UNAM. On the theoretical side there were talks on recent developments in nuclear structure, weakly bound nuclei, cluster models

  11. Proceedings of the TOUGH Symposium 2009

    Energy Technology Data Exchange (ETDEWEB)

    Moridis, George J.; Doughty, Christine; Finsterle, Stefan; Sonnenthal, Eric

    2009-10-01

    Welcome to the TOUGH Symposium 2009. Within this volume are the Symposium Program for eighty-nine papers to be presented in both oral and poster formats. The full papers are available as pdfs linked from the Symposium Program posted on the TOUGH Symposium 2009 website http://esd.lbl.gov/newsandevents/events/toughsymposium09/program.html Additional updated information including any changes to the Program will also be available at the website. The papers cover a wide range of application areas and reflect the continuing trend toward increased sophistication of the TOUGH codes. A CD containing the proceedings papers will be published immediately following the Symposium and sent to all participants. As in the prior Symposium, selected papers will be invited for submission to a number of journals for inclusion in Special Issues focused on applications and developments of the TOUGH codes. These journals include, Transport in Porous Media, Geothermics, Energy Conversion and Management, Journal of Nuclear Science and Technology, and the Vadose Zone Journal.

  12. Proceedings of the Numerical Modeling for Underground Nuclear Test Monitoring Symposium

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, S.R.; Kamm, J.R. [eds.

    1993-11-01

    The purpose of the meeting was to discuss the state-of-the-art in numerical simulations of nuclear explosion phenomenology with applications to test ban monitoring. We focused on the uniqueness of model fits to data, the measurement and characterization of material response models, advanced modeling techniques, and applications of modeling to monitoring problems. The second goal of the symposium was to establish a dialogue between seismologists and explosion-source code calculators. The meeting was divided into five main sessions: explosion source phenomenology, material response modeling, numerical simulations, the seismic source, and phenomenology from near source to far field. We feel the symposium reached many of its goals. Individual papers submitted at the conference are indexed separately on the data base.

  13. Proceedings of the Numerical Modeling for Underground Nuclear Test Monitoring Symposium

    International Nuclear Information System (INIS)

    Taylor, S.R.; Kamm, J.R.

    1993-11-01

    The purpose of the meeting was to discuss the state-of-the-art in numerical simulations of nuclear explosion phenomenology with applications to test ban monitoring. We focused on the uniqueness of model fits to data, the measurement and characterization of material response models, advanced modeling techniques, and applications of modeling to monitoring problems. The second goal of the symposium was to establish a dialogue between seismologists and explosion-source code calculators. The meeting was divided into five main sessions: explosion source phenomenology, material response modeling, numerical simulations, the seismic source, and phenomenology from near source to far field. We feel the symposium reached many of its goals. Individual papers submitted at the conference are indexed separately on the data base

  14. FY 1994 annual report. Advanced combustion science utilizing microgravity

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-10-01

    Researches on combustion in microgravity were conducted to develop combustion devices for advanced combustion techniques, and thereby to cope with the requirements for diversification of energy sources and abatement of environmental pollution by exhaust gases. This project was implemented under the research cooperation agreement with US's NASA, and the Japanese experts visited NASA's test facilities. NASA's Lewis Research Center has drop test facilities, of which the 2.2-sec drop test facilities are useful for researches by Japan. The cooperative research themes for combustion in microgravity selected include interactions between fuel droplets, high-pressure combustion of binary fuel sprays, and ignition and subsequent flame propagation in microgravity. An ignition test equipment, density field measurement equipment and flame propagation test equipment were constructed in Japan to conduct the combustion tests in microgravity for, e.g., combustion and evaporation of fuel droplets, combustion characteristics of liquid fuels mixed with solid particles, combustion of coal/oil mixture droplets, and estimating flammability limits. (NEDO)

  15. Sixth BHD Symposium and First International Upstate Kidney Cancer Symposium: latest scientific and clinical discoveries

    OpenAIRE

    Bratslavsky, Gennady; Woodford, Mark R.; Daneshvar, Michael; Mollapour, Mehdi

    2016-01-01

    The Sixth BHD Symposium and First International Upstate Kidney Cancer Symposium concluded in September 2015, in Syracuse, NY, USA. The program highlighted recent findings in a variety of areas, including drug development, therapeutics and surgical management of patients with BHD and multi-focal renal tumors, as well as multidisciplinary approaches for patients with localized, locally advanced and metastatic renal cell carcinoma.

  16. Sixth BHD Symposium and First International Upstate Kidney Cancer Symposium: latest scientific and clinical discoveries.

    Science.gov (United States)

    Bratslavsky, Gennady; Woodford, Mark R; Daneshvar, Michael; Mollapour, Mehdi

    2016-03-29

    The Sixth BHD Symposium and First International Upstate Kidney Cancer Symposium concluded in September 2015, in Syracuse, NY, USA. The program highlighted recent findings in a variety of areas, including drug development, therapeutics and surgical management of patients with BHD and multi-focal renal tumors, as well as multidisciplinary approaches for patients with localized, locally advanced and metastatic renal cell carcinoma.

  17. Spectroscopy, Kinetics, and Dynamics of Combustion Radicals

    Energy Technology Data Exchange (ETDEWEB)

    Nesbitt, David J. [Research/Professor

    2013-08-06

    Spectroscopy, kinetics and dynamics of jet cooled hydrocarbon transients relevant to the DOE combustion mission have been explored, exploiting i) high resolution IR lasers, ii) slit discharge sources for formation of jet cooled radicals, and iii) high sensitivity detection with direct laser absorption methods and near the quantum shot noise limit. What makes this combination powerful is that such transients can be made under high concentrations and pressures characteristic of actual combustion conditions, and yet with the resulting species rapidly cooled (T ≈10-15K) in the slit supersonic expansion. Combined with the power of IR laser absorption methods, this provides novel access to spectral detection and study of many critical combustion species.

  18. Symposium on accelerator mass spectrometry

    International Nuclear Information System (INIS)

    1981-01-01

    The area of accelerator mass spectrometry has expanded considerably over the past few years and established itself as an independent and interdisciplinary research field. Three years have passed since the first meeting was held at Rochester. A Symposium on Accelerator Mass Spectrometry was held at Argonne on May 11-13, 1981. In attendance were 96 scientists of whom 26 were from outside the United States. The present proceedings document the program and excitement of the field. Papers are arranged according to the original program. A few papers not presented at the meeting have been added to complete the information on the status of accelerator mass spectrometry. Individual papers were prepared separately for the data base

  19. Symposium on accelerator mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-01-01

    The area of accelerator mass spectrometry has expanded considerably over the past few years and established itself as an independent and interdisciplinary research field. Three years have passed since the first meeting was held at Rochester. A Symposium on Accelerator Mass Spectrometry was held at Argonne on May 11-13, 1981. In attendance were 96 scientists of whom 26 were from outside the United States. The present proceedings document the program and excitement of the field. Papers are arranged according to the original program. A few papers not presented at the meeting have been added to complete the information on the status of accelerator mass spectrometry. Individual papers were prepared separately for the data base.

  20. World Population Day special symposium.

    Science.gov (United States)

    1998-08-01

    This article describes Japan's celebration of World Population Day, and provides excerpts from speeches at the symposium held on July 8, 1998. The symposium, in Tokyo, was attended by about 300 people. The Chairman of JOICFP gave the opening address. The executive director of UNFPA congratulated Japan for its efforts in the field of population awareness and noted Japan's self-sufficiency despite its importation of 40% of its food and most of its raw materials. A keynote address was delivered by the president of CPE and the former UN Secretary General, who stressed income inequities in the 66% of developing countries within the 185 UN member states. The UN has been promoting sustainable development, but is facing the issue of limited arable land and population growth. The Tutsi and Hutus are fighting due to population based issues. The emphasis should be on women's reproductive rights and protection of women's human rights. 1998 is the 50th year of human rights; progress has been made. The UNFPA Goodwill Ambassador spoke about the disparity between the rich and poor in the Philippines. A small donation reaps incredible progress. Manila has high levels of adolescent childbearing. Men appear to be unaware of the disadvantages of childbearing too early. Rural areas are dominated by strict Roman Catholic beliefs. Manila has commercial sex workers who provide services to Japanese men. The 1998 Kato Award was given to women who raised awareness about coercion in the sex trade and female genital mutilation. The economic situation in Japan creates even greater need to promote family planning and reproductive health.

  1. International waste-management symposium

    International Nuclear Information System (INIS)

    Shoup, R.L.

    1977-01-01

    An International Symposium on the Management of Wastes from the LWR Fuel Cycle was held in Denver, Colo., on July 11 to 16, 1976. The symposium covered a broad range of topics, from policy issues to technology. Presentations were made by national and international speakers involved in all aspects of waste management, government and agency officials; laboratory managers, directors, and researchers; and industrial representatives. Many speakers advocated pragmatic action on programs for the management of commercial nuclear wastes to complete the light-water reactor (LWR) fuel cycle. The industrialized nations' demand for increasing supplies of energy and their increasing dependence on nuclear energy to fulfill this demand will necessitate the development of an acceptable solution to the disposal of nuclear wastes within the next decade for some industrial nations. Waste-disposal technology should be implemented on a commercial scale, but the commercialization must be accompanied by the decision to use the technology. An important issue in the use of nuclear energy is the question of sharing the technology with the less industrialized nations and with nations that may not have suitable means to dispose of nuclear wastes. The establishment of international and multinational cooperation will be an important key in realizing this objective. Pressing issues that international organizations or task groups will have to address are ocean disposal, plutonium recycling and safeguards, and disposal criteria. The importance of achieving a viable waste-management program is made evident by the increased funding and attention that the back end of the fuel cycle is now receiving

  2. Dioxins and polyvinylchloride in combustion and fires.

    Science.gov (United States)

    Zhang, Mengmei; Buekens, Alfons; Jiang, Xuguang; Li, Xiaodong

    2015-07-01

    This review on polyvinylchloride (PVC) and dioxins collects, collates, and compares data from selected sources on the formation of polychlorinated dibenzofurans (PCDFs) and dibenzo-p-dioxins (PCDDs), or in brief dioxins, in combustion and fires. In professional spheres, the incineration of PVC as part of municipal solid waste is seldom seen as a problem, since deep flue gas cleaning is required anyhow. Conversely, with its high content of chlorine, PVC is frequently branded as a major chlorine donor and spitefully leads to substantial formation of dioxins during poorly controlled or uncontrolled combustion and open fires. Numerous still ill-documented and diverse factors of influence may affect the formation of dioxins during combustion: on the one hand PVC-compounds represent an array of materials with widely different formulations; on the other hand these may all be exposed to fires of different nature and consequences. Hence, attention should be paid to PVC with respect to the ignition and development of fires, as well as attenuating the emission of objectionable compounds, such as carbon monoxide, hydrogen chloride, polycyclic aromatic hydrocarbons, and dioxins. This review summarises available dioxin emissions data, gathers experimental and simulation studies of fires and combustion tests involving PVC, and identifies and analyses the effects of several local factors of influence, affecting the formation of dioxins during PVC combustion. © The Author(s) 2015.

  3. International senior expert symposium on electricity and the environment: Highlights and conclusions from Helsinki

    International Nuclear Information System (INIS)

    Bennett, L.L.

    1991-01-01

    This article summarizes briefly the Senior Expert Symposium on Electricity and the Environment, held in May 1991. Four Expert Groups considered key issues: the implications for the global environment of energy and electricity supply and demand; energy sources and technologies for electricity generation; comparative environmental and health effects of different energy sources for electricity generation; and the incorporation of environmental and health impacts into policy, planning and decision making for the electricity sector. The conclusions of these groups are presented

  4. Global cloud condensation nuclei influenced by carbonaceous combustion aerosol

    Directory of Open Access Journals (Sweden)

    D. V. Spracklen

    2011-09-01

    Full Text Available Black carbon in carbonaceous combustion aerosol warms the climate by absorbing solar radiation, meaning reductions in black carbon emissions are often perceived as an attractive global warming mitigation option. However, carbonaceous combustion aerosol can also act as cloud condensation nuclei (CCN so they also cool the climate by increasing cloud albedo. The net radiative effect of carbonaceous combustion aerosol is uncertain because their contribution to CCN has not been evaluated on the global scale. By combining extensive observations of CCN concentrations with the GLOMAP global aerosol model, we find that the model is biased low (normalised mean bias = −77 % unless carbonaceous combustion aerosol act as CCN. We show that carbonaceous combustion aerosol accounts for more than half (52–64 % of global CCN with the range due to uncertainty in the emitted size distribution of carbonaceous combustion particles. The model predicts that wildfire and pollution (fossil fuel and biofuel carbonaceous combustion aerosol causes a global mean cloud albedo aerosol indirect effect of −0.34 W m−2, with stronger cooling if we assume smaller particle emission size. We calculate that carbonaceous combustion aerosol from pollution sources cause a global mean aerosol indirect effect of −0.23 W m−2. The small size of carbonaceous combustion particles from fossil fuel sources means that whilst pollution sources account for only one-third of the emitted mass they cause two-thirds of the cloud albedo aerosol indirect effect that is due to carbonaceous combustion aerosol. This cooling effect must be accounted for, along with other cloud effects not studied here, to ensure that black carbon emissions controls that reduce the high number concentrations of fossil fuel particles have the desired net effect on climate.

  5. Introduction and Overview of the Symposium Anil Kumar (Indian ...

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Introduction and Overview of the Symposium Anil Kumar (Indian Institute of Science, Bangalore). Symposium on Quantum Computing and Quantum Information. Notes:

  6. Combustion Byproducts Recycling Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Paul Ziemkiewicz; Tamara Vandivort; Debra Pflughoeft-Hassett; Y. Paul Chugh; James Hower

    2008-08-31

    The Combustion Byproducts Recycling Consortium (CBRC) program was developed as a focused program to remove and/or minimize the barriers for effective management of over 123 million tons of coal combustion byproducts (CCBs) annually generated in the USA. At the time of launching the CBRC in 1998, about 25% of CCBs were beneficially utilized while the remaining was disposed in on-site or off-site landfills. During the ten (10) year tenure of CBRC (1998-2008), after a critical review, 52 projects were funded nationwide. By region, the East, Midwest, and West had 21, 18, and 13 projects funded, respectively. Almost all projects were cooperative projects involving industry, government, and academia. The CBRC projects, to a large extent, successfully addressed the problems of large-scale utilization of CCBs. A few projects, such as the two Eastern Region projects that addressed the use of fly ash in foundry applications, might be thought of as a somewhat smaller application in comparison to construction and agricultural uses, but as a novel niche use, they set the stage to draw interest that fly ash substitution for Portland cement might not attract. With consideration of the large increase in flue gas desulfurization (FGD) gypsum in response to EPA regulations, agricultural uses of FGD gypsum hold promise for large-scale uses of a product currently directed to the (currently stagnant) home construction market. Outstanding achievements of the program are: (1) The CBRC successfully enhanced professional expertise in the area of CCBs throughout the nation. The enhanced capacity continues to provide technology and information transfer expertise to industry and regulatory agencies. (2) Several technologies were developed that can be used immediately. These include: (a) Use of CCBs for road base and sub-base applications; (b) full-depth, in situ stabilization of gravel roads or highway/pavement construction recycled materials; and (c) fired bricks containing up to 30%-40% F

  7. Combustion and regulation; Combustion et reglementation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This conference was organized after the publication of the French by-law no 2010 relative to combustion installations and to the abatement of atmospheric pollution. Five topics were discussed during the conference: the new regulations, their content, innovations and modalities of application; the means of energy suppliers to face the new provisions and their schedule; the manufacturers proposals for existing installations and the new equipments; the administration control; and the impact of the new measures on exploitation and engineering. Twenty papers and 2 journal articles are reported in these proceedings. (J.S.)

  8. Combustible structural composites and methods of forming combustible structural composites

    Science.gov (United States)

    Daniels, Michael A.; Heaps, Ronald J.; Steffler, Eric D.; Swank, W. David

    2013-04-02

    Combustible structural composites and methods of forming same are disclosed. In an embodiment, a combustible structural composite includes combustible material comprising a fuel metal and a metal oxide. The fuel metal is present in the combustible material at a weight ratio from 1:9 to 1:1 of the fuel metal to the metal oxide. The fuel metal and the metal oxide are capable of exothermically reacting upon application of energy at or above a threshold value to support self-sustaining combustion of the combustible material within the combustible structural composite. Structural-reinforcing fibers are present in the composite at a weight ratio from 1:20 to 10:1 of the structural-reinforcing fibers to the combustible material. Other embodiments and aspects are disclosed.

  9. Optical Tomography in Combustion

    DEFF Research Database (Denmark)

    Evseev, Vadim

    spectral measurements at several line-of-sights with a view to applications for tomographic measurements on full-scale industrial combustion systems. The system was successfully applied on industrial scale for simultaneous fast exhaust gas temperature measurements in the three optical ports of the exhaust......D project, it was also important to investigate the spectral properties of major combustion species such as carbon dioxide and carbon monoxide in the infrared range at high temperatures to provide the theoretical background for the development of the optical tomography methods. The new software....... JQSRT 113 (2012) 2222, 10.1016/j.jqsrt.2012.07.015] included in the PhD thesis as an attachment. The knowledge and experience gained in the PhD project is the first important step towards introducing the advanced optical tomography methods of combustion diagnostics developed in the project to future...

  10. Internal combustion engine

    Science.gov (United States)

    Baker, Quentin A.; Mecredy, Henry E.; O'Neal, Glenn B.

    1991-01-01

    An improved engine is provided that more efficiently consumes difficult fuels such as coal slurries or powdered coal. The engine includes a precombustion chamber having a portion thereof formed by an ignition plug. The precombustion chamber is arranged so that when the piston is proximate the head, the precombustion chamber is sealed from the main cylinder or the main combustion chamber and when the piston is remote from the head, the precombustion chamber and main combustion chamber are in communication. The time for burning of fuel in the precombustion chamber can be regulated by the distance required to move the piston from the top dead center position to the position wherein the precombustion chamber and main combustion chamber are in communication.

  11. Fuel and combustion stratification study of Partially Premixed Combustion

    OpenAIRE

    Izadi Najafabadi, M.; Dam, N.; Somers, B.; Johansson, B.

    2016-01-01

    Relatively high levels of stratification is one of the main advantages of Partially Premixed Combustion (PPC) over the Homogeneous Charge Compression Ignition (HCCI) concept. Fuel stratification smoothens heat release and improves controllability of this kind of combustion. However, the lack of a clear definition of “fuel and combustion stratifications” is obvious in literature. Hence, it is difficult to compare stratification levels of different PPC strategies or other combustion concepts. T...

  12. Aerosols from biomass combustion

    Energy Technology Data Exchange (ETDEWEB)

    Nussbaumer, T

    2001-07-01

    This report is the proceedings of a seminar on biomass combustion and aerosol production organised jointly by the International Energy Agency's (IEA) Task 32 on bio energy and the Swiss Federal Office of Energy (SFOE). This collection of 16 papers discusses the production of aerosols and fine particles by the burning of biomass and their effects. Expert knowledge on the environmental impact of aerosols, formation mechanisms, measurement technologies, methods of analysis and measures to be taken to reduce such emissions is presented. The seminar, visited by 50 participants from 11 countries, shows, according to the authors, that the reduction of aerosol emissions resulting from biomass combustion will remain a challenge for the future.

  13. High Gravity (g) Combustion

    Science.gov (United States)

    2006-02-01

    UNICORN (Unsteady Ignition and Combustion with Reactions) code10. Flame propagation in a tube that is 50-mm wide and 1000-mm long (similar to that...turbine engine manufacturers, estimating the primary zone space heating rate. Both combustion systems, from Company A and Company B, required a much...MBTU/atm-hr-ft3) Te m pe ra tu re R is e (K ) dP/P = 2% dP/P = 2.5% dP/P = 3% dP/P = 3.5% dP/P = 4% Company A Company B Figure 13: Heat Release Rate

  14. Combustibility of tetraphenylborate solids

    International Nuclear Information System (INIS)

    Walker, D.D.

    1989-01-01

    Liquid slurries expected under normal in-tank processing (ITP) operations are not ignitible because of their high water content. However, deposits of dry solids from the slurries are combustible and produce dense, black smoke when burned. The dry solids burn similarly to Styrofoam and more easily than sawdust. It is the opinion of fire hazard experts that a benzene vapor deflagration could ignite the dry solids. A tetraphenylborate solids fire will rapidly plug the waste tank HEPA ventilation filters due to the nature of the smoke produced. To prevent ignition and combustion of these solids, the waste tanks have been equipped with a nitrogen inerting system

  15. Studies in combustion dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Koszykowski, M.L. [Sandia National Laboratories, Livermore, CA (United States)

    1993-12-01

    The goal of this program is to develop a fundamental understanding and a quantitative predictive capability in combustion modeling. A large part of the understanding of the chemistry of combustion processes comes from {open_quotes}chemical kinetic modeling.{close_quotes} However, successful modeling is not an isolated activity. It necessarily involves the integration of methods and results from several diverse disciplines and activities including theoretical chemistry, elementary reaction kinetics, fluid mechanics and computational science. Recently the authors have developed and utilized new tools for parallel processing to implement the first numerical model of a turbulent diffusion flame including a {open_quotes}full{close_quotes} chemical mechanism.

  16. Turbulent Combustion Modeling Advances, New Trends and Perspectives

    CERN Document Server

    Echekki, Tarek

    2011-01-01

    Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book ...

  17. Combustion stratification for naphtha from CI combustion to PPC

    NARCIS (Netherlands)

    Vallinayagam, R.; Vedharaj, S.; An, Y.; Dawood, A.; Izadi Najafabadi, M.; Somers, L.M.T.; Johansson, B.H.

    2017-01-01

    This study demonstrated the change in combustion homogeneity from conventional diesel combustion via partially premixed combustion towards HCCI. Experiments are performed in an optical diesel engine at a speed of 1200 rpm with diesel fuel. Single injection strategy is employed and the fuel is

  18. PREFACE: International Symposium on `Vacuum Science and Technology' (IVS 2007)

    Science.gov (United States)

    Mittal, K. C.; Gupta, S. K.

    2008-03-01

    The Indian Vacuum Society (established in 1970) has organized a symposium every alternate year on various aspects of vacuum science and technology. There has been considerable participation from R & D establishments, universities and Indian industry in this event. In view of the current global scenario and emerging trends in vacuum technology, this year, the executive committee of IVS felt it appropriate to organize an international symposium at Tata Institute of Fundamental Research, Colaba, Mumbai 400 005 from 29-30 November 2007. This symposium provided a forum for exchange of information among vacuum scientists, technologists and industrialists on recent advances made in the areas of large vacuum systems, vacuum production, its measurement and applications in industry, and material processing in vacuum. Vacuum science and technology has made vital contributions in high tech areas like space, high energy particle accelerators, large plasma systems, electronics, thin films, melting and refining of metals, extraction and processing of advanced materials etc. The main areas covered in the symposium were the production and measurement of vacuums, leak detection, large vacuum systems, vacuum metallurgy, vacuum materials and processing inclusive of applications of vacuum in industry. Large vacuum systems for high energy particle accelerators, plasma devices and light sources are of special significance for this symposium. Vacuum evaporation, hard coatings, thin films, joining techniques, sintering, melting and heat treatment, furnaces and thermo dynamics are also covered in this symposium. There were eighteen invited talks from the best experts in the respective fields and more than one hundred contributed papers. This fact itself indicates the interest that has been generated amongst the scientists, technologists and industrialists in this field. In view of the industrial significance of the vacuum technology, an exhibition of vacuum and vacuum processing related

  19. 2. Symposium environmental geotechnics. Papers; 2. Symposium Umweltgeotechnik. Konferenzband

    Energy Technology Data Exchange (ETDEWEB)

    Klapperich, H. [TU Bergakademie Freiberg (Germany). Inst. fuer Geotechnik]|[Kompetenz-Zentrum fuer interdisziplinaeres Flaechenrecycling CIF e.V., Freiberg (ED); Katzenbach, R. [Deutsche Gesellschaft fuer Geotechnike e.V., Essen (Germany); Witt, K.J. [Bauhaus-Universitaet Weimar (Germany); Griessl, D. (eds.) [Verein Freiberger Geotechniker e.V. (Germany)

    2005-07-01

    The 2nd symposium of the chapter section 'Environmental Geotechnics' of DGGT follows the event in Weimar 2003 and focuses on the central topics of Landfill - Contaminated Sites - Brownfields. The stream 'Waste management - Waste Site technology' discusses legal requirements and technical alternatives, especially in view of many upcoming closures of landfill sites and associated surface sealing, as well as technical reports of case studies and developments. The contribution 'Ultimate storage of radioactive waste' illustrates the wider dimensions to geotechnical questions. Between the streams of 'Remediation Techniques' and 'Land Recycling/Land Management' a panel discussion 'From Brownfield Remediation to Land Management' is taking place. The aim is to discuss the way forward and the need to take up the opportunity for future town planning as well as the design of conversion sites and expansive former mining areas. Representatives of authorities involved and project participants have submitted their statements in advance to the following question: 1.) status of remediation - research and practice 2.) what practical significance is attributed to different remediation techniques for the remediation of brownfields? 3.) modern town planning/redevelopment of former mining areas - spatial planning - real estate economy - financing models for redeveloping land - which parameters/instruments work? (orig.)

  20. Toward human organ printing: Charleston Bioprinting Symposium.

    Science.gov (United States)

    Mironov, Vladimir

    2006-01-01

    The First Annual Charleston Bioprinting Symposium was organized by the Bioprinting Research Center of the Medical University of South Carolina (MUSC) and convened July 21, 2006, in Charleston, South Carolina. In broad terms, bioprinting is the application of rapid prototyping technology to the biomedical field. More specifically, it is defined as the layer by layer deposition of biologically relevant material. The 2006 Symposium included four sessions: Computer-aided design and Bioprinting, Bioprinting Technologies; Hydrogel for Bioprinting and, finally, a special session devoted to ongoing research projects at the MUSC Bioprinting Research Center. The Symposium highlight was the presentation of the multidisciplinary Charleston Bioengineered Kidney Project. This symposium demonstrated that bioprinting or robotic biofabrication is one of the most exciting and fast-emerging branches in the tissue engineering field. Robotic biofabrication will eventually lead to industrial production of living human organs suitable for clinical transplantation. The symposium demonstrated that although there are still many technological challenges, organ printing is a rapidly evolving feasible technology.

  1. The 12th International Symposium on Spermatology

    Science.gov (United States)

    Aitken, R John; Cummins, Jim M; Nixon, Brett

    2015-01-01

    The 12th International Symposium of Spermatology continued the excellent tradition of this meeting since its inception in 1969 when the first Symposium was held in Italy under the Chairmanship of Professor Baccio Baccetti. This unique Symposium is held every 4 years and serves as a beacon for sperm cell biologists from all over the world, regardless of which species, animal or plant, they are working on. This willingness to embrace the fundamental biology of this distinctive cell type without species limitations is one of the hallmarks of this Symposium. For sperm biologists – it is our Olympics. The meeting in Newcastle, NSW brought together around 300 biologists from more than 22 different countries covering North and South America, Africa, Europe, Asia and Australia. Given the considerable distances and high cost involved in travelling to the East Coast of NSW, this was an outstanding outcome. The Symposium featured a series of 31 plenary lectures culminating in the prestigious Thaddeus Mann Memorial Lecture, which was delivered with typical grace and brilliance by Professor Masaru Okabe. PMID:25994646

  2. Proceedings of the symposium on networking

    International Nuclear Information System (INIS)

    Karita, Yukio; Abe, Fumio

    1989-06-01

    The first symposium on networking was held on February 6-7, 1989. Due to the increase of the needs of computer networks, several networks which connect among universities and laboratories are going to be constructed in Japan. However, the techniques in networking are not familiar to most people, and the information about these techniques is sometimes difficult to get, especially in multivendor connection. In such situation, an opportunity to hold a symposium on networking at the National Laboratory for High Energy Physics (KEK) was given. More than 200 people took part in this symposium, and the local area networks in institutions, the networks among institutions, the networks for high energy physics, the application of networks, the networks for academic research and so on are reported. The valuable discussion about networks was carried out, including the plans for near future. At the time of this symposium, the construction of the Gakujo-net and the Pacific network project of University of Hawaii were in progress, and many Japanese universities are going to construct their campus LANs, so the symposium seemed to be very timely. (K.I.)

  3. Underground treatment of combustible minerals

    Energy Technology Data Exchange (ETDEWEB)

    Sarapuu, E

    1954-10-14

    A process is described for treating oil underground, consisting in introducing several electrodes spaced one from the other in a bed of combustibles underground so that they come in electric contact with this bed of combustibles remaining insulated from the ground, and applying to the electrodes a voltage sufficient to produce an electric current across the bed of combustibles, so as to heat it and create an electric connection between the electrodes on traversing the bed of combustibles.

  4. Supersonic Combustion Ramjet Research

    Science.gov (United States)

    2012-08-01

    was in collaboration with Prof. R. Bowersox (Texas A&M University) and Dr. K. Kobayashi ( Japanese Aerospace Exploration Agency, JAXA). 4.2 Ignition... cinema stereoscopic PIV system for the measurement of micro- and meso-scale turbulent premixed flame dynamics,” Paper B13, 5th US Combustion

  5. Infrared monitoring of combustion

    International Nuclear Information System (INIS)

    Bates, S.C.; Morrison, P.W. Jr.; Solomon, P.R.

    1991-01-01

    In this paper, the use of Fourier Transform Infrared (FT-IR) spectroscopy for combustion monitoring is described. A combination of emission, transmission, and reflection FT-IR spectroscopy yields data on the temperature and composition of the gases, surfaces and suspended particles in the combustion environment. Detection sensitivity of such trace exhaust gases as CO, CO 2 , SO 2 , NO x , and unburned hydrocarbons is at the ppm level. Tomographic reconstruction converts line-of-sight measurements into spatially resolved temperature and concentration data. Examples from various combustion processes are used to demonstrate the capabilities of the technique. Industrial measurements are described that have been performed directly in the combustion zone and in the exhaust duct of a large chemical recovery boiler. Other measurements of hot slag show how FT-IR spectroscopy can determine the temperature and optical properties of surfaces. In addition, experiments with water droplets show that transmission FT-IR data yield spectra that characterize particle size and number density

  6. Combustible dust tests

    Science.gov (United States)

    The sugar dust explosion in Georgia on February 7, 2008 killed 14 workers and injured many others (OSHA, 2009). As a consequence of this explosion, OSHA revised its Combustible Dust National Emphasis (NEP) program. The NEP targets 64 industries with more than 1,000 inspections and has found more tha...

  7. Emission of toxic air pollutants from biomass combustion

    International Nuclear Information System (INIS)

    Houck, J.E.; Barnett, S.G.; Roholt, R.B.; Rock, M.E.

    1991-01-01

    Combustion of biomass for power generation, home heating, process steam generation, and waste disposal constitutes a major source of air pollutants nationwide. Emissions from hog-fueled boilers, demolition wood-fired power plants, municipal waste incinerators, woodstoves, fireplaces, pellet stoves, agricultural burning, and forestry burning have been characterized for a variety of purposes. These have included risk assessment, permitting, emission inventory development, source profiling for receptor modeling, and control technology evaluations. From the results of the source characterization studies a compilation of emission factors for criteria and non-criteria pollutants are presented here. Key among these pollutants are polycyclic aromatic hydrocarbons, priority pollutant metals, carbon monoxide, sulfur dioxide, nitrous oxides, and PM 10 particles. The emission factors from the biomass combustion processes are compared and contrasted with other pollutant sources. In addition, sampling and analysis procedures most appropriate for characterizing emissions from the biomass combustion sources are also discussed

  8. Working group report: methane emissions from fuel combustion and industrial processes

    International Nuclear Information System (INIS)

    Berdowski, J.J.M.; Beck, L.; Piccot, S.; Olivier, J.G.J.; Veldt, C.

    1993-01-01

    This paper lists the source categories which are currently recognised as minor sources of methane. These fall into five broad groups: stationary fuel combustion (residential combustion of fuels, solid waste incineration at home sites, on-site agricultural waste burning, industrial and utility combustion of coal, wood, oil and gas, commercial and industrial waste incineration); mobile fuel combustion; non-combustion industrial processes (primary metals production, chemical manufacturing processes, petroleum refining, commercial charcoal manufacturing waste treatments); minor energy production sources (storage and distribution of automotive fuels, geothermal energy production; peat mining operations, oil shale mining operations); and miscellaneous sources. The paper also presents a preliminary estimate of global methane emissions from these minor sources and the results of the working group's discussion on recommendations for the IPCC/OECD methodology and specific research needs. A list of control options for emissions from minor sources is provided. 2 tabs

  9. Use of regenerative energy sources and hydrogen technology 2006. Proceedings

    International Nuclear Information System (INIS)

    Lehmann, J.; Luschtinetz, T.

    2006-01-01

    This volume contains 25 contributions, which were held on the 13th symposium ''Use of regenerative energy sources and hydrogen technology'' in Stralsund (Germany). Separate documentation items analysing 16 of the contributions have been prepared for the ENERGY database

  10. Proceedings of the second ERDA statistical symposium

    Energy Technology Data Exchange (ETDEWEB)

    Tietjen, G.; Campbell, K. (comps.)

    1977-04-01

    The Second ERDA Statistical Symposium, sponsored by the Energy Research and Development Administration, was held at Oak Ridge, Tennessee, October 25-27, 1976. This was the second annual symposium designed to promote interlaboratory communications among ERDA statisticians as well as contacts with statisticians from other institutions. The proceedings of the first symposium, held at Los Alamos in November, 1975, have been published by Batelle Pacific Northwest Laboratories (BNWL-1986). Separate abstracts were prepared for seven of the papers in this proceeding, all going in ERDA Energy Research Abstracts (ERA) and two in Energy Abstracts for Policy Analysis (EAPA). The remaining four have already been cited in ERA and can be found by referring to CONF-761023-- in the report number index. (RWR)

  11. 6th International Symposium on Thermal Expansion

    CERN Document Server

    1978-01-01

    This 6th International Symposium on Thermal Expansion, the first outside the USA, was held on August 29-31, 1977 at the Gull Harbour Resort on Hecla Island, Manitoba, Canada. Symposium Chairman was Ian D. Peggs, Atomic Energy of Canada Limited, and our continuing sponsor was CINDAS/Purdue University. We made considerable efforts to broaden the base this year to include more users of expansion data but with little success. We were successful, however, in establishing a session on liquids, an area which is receiving more attention as a logical extension to the high-speed thermophysical property measurements on materials at temperatures close to their melting points. The Symposium had good international representation but the overall attendance was, disappointingly, relatively low. Neverthe­ less, this enhanced the informal atmosphere throughout the meeting with a resultant frank exchange of information and ideas which all attendees appreciated. A totally new item this year was the presentation of a bursary to ...

  12. 22nd DAE High Energy Physics Symposium

    CERN Document Server

    2018-01-01

    These proceedings gather invited and contributed talks presented at the XXII DAE-BRNS High Energy Physics (HEP) Symposium, which was held at the University of Delhi, India, on 12–16 December 2016. The contributions cover a variety of topics in particle physics, astroparticle physics, cosmology and related areas from both experimental and theoretical perspectives, namely (1) Neutrino Physics, (2) Standard Model Physics (including Electroweak, Flavour Physics), (3) Beyond Standard Model Physics, (4) Heavy Ion Physics & QCD (Quantum Chromodynamics), (5) Particle Astrophysics & Cosmology, (6) Future Experiments and Detector Development, (7) Formal Theory, and (8) Societal Applications: Medical Physics, Imaging, etc. The DAE-BRNS High Energy Physics Symposium, widely considered to be one of the leading symposiums in the field of Elementary Particle Physics, is held every other year in India and supported by the Board of Research in Nuclear Sciences (BRNS), Department of Atomic Energy (DAE), India. As man...

  13. 28th International Acoustical Imaging Symposium

    CERN Document Server

    André, Michael P; Andre, Michael; Arnold, Walter; Bamber, Jeff; Burov, Valentin; Chubachi, Noriyoshi; Erikson, Kenneth; Ermert, Helmut; Fink, Mathias; Gan, Woon S; Granz, Bernd; Greenleaf, James; Hu, Jiankai; Jones, Joie P; Khuri-Yakub, Pierre; Laugier, Pascal; Lee, Hua; Lees, Sidney; Levin, Vadim M; Maev, Roman; Masotti, Leonardo; Nowicki, Andrzej; O’Brien, William; Prasad, Manika; Rafter, Patrick; Rouseff, Daniel; Thijssen, Johan; Tittmann, Bernard; Tortoli, Piero; Steen, Anton; Waag, Robert; Wells, Peter; Acoustical Imaging

    2007-01-01

    The International Acoustical Imaging Symposium has been held continuously since 1968 as a unique forum for advanced research, promoting the sharing of technology, developments, methods and theory among all areas of acoustics. The interdisciplinary nature of the Symposium and the wide international participation are two of its main strengths. Scientists from around the world present their papers in an informal environment conducive to lively discussion and cross-fertilization. The fact that a loyal community of scientists has supported this Series since 1968 is evidence of its impact on the field. The Symposium Series continues to thrive in a busy calendar of scientific meetings without the infrastructure of a professional society. It does so because those who attend and those who rely on the Proceedings as a well-known reference work acknowledge its value. This Volume 28 of the Proceedings likewise contains an excellent collection of papers presented in six major categories, offering both a broad perspective ...

  14. 30th International Acoustical Imaging Symposium

    CERN Document Server

    Jones, Joie; Lee, Hua

    2011-01-01

    The International Symposium on Acoustical Imaging is a unique forum for advanced research, covering new technologies, developments, methods and theories in all areas of acoustics. This interdisciplinary Symposium has been taking place every two years since 1968. In the course of the years the proceedings volumes in the Acoustical Imaging Series have become a reference for cutting-edge research in the field. In 2009 the 30th International Symposium on Acoustical Imaging was held in Monterey, CA, USA, March 1-4. Offering both a broad perspective on the state-of-the-art as well as  in-depth research contributions by the specialists in the field, this Volume 30 in the Series contains an excellent collection of forty three papers presented in five major categories: Biomedical Imaging Acoustic Microscopy Non-Destructive Evaluation Systems Analysis Signal Analysis and Image Processing Audience Researchers in medical imaging and biomedical instrumentation experts.

  15. Interdisciplinary Symposium on Complex Systems

    CERN Document Server

    Zelinka, Ivan; Rössler, Otto

    2014-01-01

    The book you hold in your hands is the outcome of the "ISCS 2013: Interdisciplinary Symposium on Complex Systems" held at the historical capital of Bohemia as a continuation of our series of symposia in the science of complex systems. Prague, one of the most beautiful European cities, has its own beautiful genius loci. Here, a great number of important discoveries were made and many important scientists spent fruitful and creative years to leave unforgettable traces. The perhaps most significant period was the time of Rudolf II who was a great supporter of the art and the science and attracted a great number of prominent minds to Prague. This trend would continue. Tycho Brahe, Niels Henrik Abel, Johannes Kepler, Bernard Bolzano, August Cauchy Christian Doppler, Ernst Mach, Albert Einstein and many others followed developing fundamental mathematical and physical theories or expanding them. Thus in the beginning of the 17th century, Kepler formulated here the first two of his three laws of planetary motion on ...

  16. Symposium 1 of JENAM 2010

    CERN Document Server

    Molaro, Paolo; From Varying Couplings to Fundamental Physics

    2011-01-01

    Nature is characterized by a number of physical laws and fundamental dimensionless couplings. These determine the  properties of our physical universe, from the size of atoms, cells and mountains to the ultimate fate of the universe as a whole. Yet it is rather remarkable how little we know about them. The constancy of physical laws is one of the cornerstones of the scientific research method, but for fundamental couplings this is an assumption with no other justification  than a historical assumption. There is no 'theory of constants' describing their role in the underlying theories and how they relate to one another or how many  of them are truly fundamental.  Studying the behaviour of these quantities throughout the history of the universe is an effective way to probe fundamental physics. This explains why the ESA and ESO include varying fundamental constants among their key science drivers for the next generation of facilities. This symposium discussed the state-of-the-art in the field, as well as the...

  17. Fourth international radiopharmaceutical dosimetry symposium

    International Nuclear Information System (INIS)

    Schlafke-Stelson, A.T.; Watson, E.E.

    1986-04-01

    The focus of the Fourth International Radiopharmaceutical Dosimetry Symposium was to explore the impact of current developments in nuclear medicine on absorbed dose calculations. This book contains the proceedings of the meeting including the edited discussion that followed the presentations. Topics that were addressed included the dosimetry associated with radiolabeled monoclonal antibodies and blood elements, ultrashort-lived radionuclides, and positron emitters. Some specific areas of discussion were variations in absorbed dose as a result of alterations in the kinetics, the influence of radioactive contaminants on dose, dose in children and in the fetus, available instrumentation and techniques for collecting the kinetic data needed for dose calculation, dosimetry requirements for the review and approval of new radiopharmaceuticals, and a comparison of the effect on the thyroid of internal versus external irradiation. New models for the urinary blader, skeleton including the active marrow, and the blood were presented. Several papers dealt with the validity of traditional ''average-organ'' dose estimates to express the dose from particulate radiation that has a short range in tissue. These problems are particularly important in the use of monoclonal antibodies and agents used to measure intracellular functions. These proceedings have been published to provide a resource volume for anyone interested in the calculation of absorbed radiation dose

  18. Symposium 3 of JENAM 2010

    CERN Document Server

    Recchi, Simone; Hensler, Gerhard; Dwarf Galaxies Keys to Galaxy Formation and Evolution

    2012-01-01

    Dwarf galaxy research constitutes an extremely vibrant field of astrophysical research, with many long-standing questions still unsettled and new ones constantly arising. The intriguing diversity of the dwarf galaxy population, observed with advanced ground-based and space-borne observatories over a wide spectral window providing an unprecedented level of detail, poses new challenges for both observers and theoreticians. The aim of this symposium was to bring together these two groups to exchange ideas and new results on the many evolutionary aspects of and open issues concerning dwarf galaxies. The main topics addressed include: • the birth of dwarf galaxies: theoretical concepts and observable relics across wavelength and time • the morphological, structural and chemical evolution of dwarf galaxies • possible evolutionary connections between early-type and late-type dwarfs • the star formation history of dwarf galaxies and its dependence on intrinsic and environmental properties • the origin ...

  19. Symposium 5 of JENAM 2010 /

    CERN Document Server

    Alves, João; Star clusters in the era of large surveys

    2012-01-01

    The symposium “Star Clusters in the Era of Large Surveys” was held in Lisbon on Sep 9-10 during the JENAM 2010. It served as a platform for discussing what and how recent, on-going and planned large-area ground-based and space-based surveys can contribute to producing a major leap in this research field, which has a strong European history. Scientific topics addressed included: • Cluster searches • Clustered vs. isolated star formation, large-scale star formation, enrichment of the field population • Structure, populations and evolution of the Milky Way • Cluster dynamics (internal and within the Milky Way) • Variability of stars in clusters (from time-resolved surveys) • Analysis techniques for large samples • Archiving This proceedings book provides a snapshot of the ongoing discussion on the role of large surveys in star cluster research, and serves as a reference volume for the state-of-the art in the field.

  20. 2. Symposium environmental geotechnics. Papers

    International Nuclear Information System (INIS)

    Klapperich, H.; Katzenbach, R.; Witt, K.J.; Griessl, D.

    2005-01-01

    The 2nd symposium of the chapter section 'Environmental Geotechnics' of DGGT follows the event in Weimar 2003 and focuses on the central topics of Landfill - Contaminated Sites - Brownfields. The stream 'Waste management - Waste Site technology' discusses legal requirements and technical alternatives, especially in view of many upcoming closures of landfill sites and associated surface sealing, as well as technical reports of case studies and developments. The contribution 'Ultimate storage of radioactive waste' illustrates the wider dimensions to geotechnical questions. Between the streams of 'Remediation Techniques' and 'Land Recycling/Land Management' a panel discussion 'From Brownfield Remediation to Land Management' is taking place. The aim is to discuss the way forward and the need to take up the opportunity for future town planning as well as the design of conversion sites and expansive former mining areas. Representatives of authorities involved and project participants have submitted their statements in advance to the following question: 1.) status of remediation - research and practice 2.) what practical significance is attributed to different remediation techniques for the remediation of brownfields? 3.) modern town planning/redevelopment of former mining areas - spatial planning - real estate economy - financing models for redeveloping land - which parameters/instruments work? (orig.)

  1. Trace emissions from gaseous combustion

    Energy Technology Data Exchange (ETDEWEB)

    Seebold, J.G. [Chevron Research and Technology Co., Richmond, CA (United States)

    2000-07-01

    The U.S. Clean Air Act (CAA) was amended in 1990 to include the development of maximum achievable control technology (MACT) emission standards for hazardous air pollutants (HAPs) for certain stationary sources by November 2000. MACT emissions standards would affect process heaters and industrial boilers since combustion processes are a potential source for many air toxins. The author noted that one of the problems with MACT is the lack of a clear solid scientific footing which is needed to develop environmentally responsible regulations. In order to amend some of these deficiencies, a 4-year, $7 million research project on the origin and fate of trace emissions in the external combustion of gaseous hydrocarbons was undertaken in a collaborative effort between government, universities and industry. This collaborative project entitled the Petroleum Environmental Research Forum (PERF) Project 92-19 produced basic information and phenomenological understanding in two important areas, one basic and one applied. The specific objectives of the project were to measure emissions while operating different full-scale burners under various operating conditions and then to analyze the emission data to identify which operating conditions lead to low air toxic emissions. Another objective was to develop new chemical kinetic mechanisms and predictive models for the formation of air toxic species which would explain the origin and fate of these species in process heaters and industrial boilers. It was determined that a flame is a very effective reactor and that trace emissions from a typical gas-fired industry burner are very small. An unexpected finding was that trace emissions are not affected by hydrocarbon gaseous fuel composition, nor by the use of ultra low nitrous oxide burners. 2 refs., 8 figs.

  2. 170th Symposium of the International Astronomical Union

    CERN Document Server

    Radford, Simon; Jewell, Philip; Mangum, Jeffrey; Bally, John

    1997-01-01

    Interstellar carbon monoxide (CO) was first detected in 1970 with the 36 foot diameter telescope of the National Radio Astronomy Observatory! on Kitt Peak in Southern Arizona. R. W. Wilson, K. B. Jefferts, and A. A. Penzias of Bell Labs reported, "We have found intense 2.6 mm line radiation 2 from nine Galactic sources which we attribute to carbon monoxide." Soon afterward, several other basic molecules were also observed in space. IAU Symposium 170, CO: Twenty Five Years of Millimeter Wave Spectroscopy, was organized to commemorate those discoveries. The Symposium reviewed the accomplishments of a quarter century of research on interstellar molec­ ular gas, surveyed the current state of millimeter-wave spectroscopy, and gave a glimpse of what the next 25 years might hold. Studies of interstellar CO have revolutionized our understanding of the phases and dynamics of the interstellar medium, the initial and final stages of stellar evolution, the chemistry of dense and diffuse interstellar matter and of the so...

  3. International symposium 'Energetics 2004'. Symposium proceedings. Book 2; Megjunarodno sovetuvanje 'Energetika 2004'. Zbornik na referati. Kniga 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The holding of this Symposium was initiated by ZEMAK - Macedonian Energy Association that for the last tens of years established itself in the national and international scientific and professional circles as a competent association of professionals with the main goal to follow, promote and improve the energy sector in the country. Having in mind the fact that the power energy sector as a fundamental sector plays a main role in the development and the improvement of the rest of the industry, and in the same time has a tremendous impact on the sustainable development of the entire economy of a country, power energy sector in fact has the paramount importance in the business environment of our country. Thus, ZEMAK has historically important role as a responsible and permanent driver, promoter and initiator for resolving of all-important questions directly or indirectly interconnected with the power energy sector in the country, and therefore the entire economy in the country as well. Following the past, ZEMAK had and would always have needs of organizing national and international symposiums and workshops as a panel where directly at one place national and international power energy experts could initiate, debate and resolve all up-to-date questions in the present energy sector in Macedonia, could analyze the modern world trends in the energy sector and try to find appropriate models for their application for further development and improvement of the energy sector in our country. This international symposium has the main goal to concentrate on a single place everybody who has power energy as a permanent preoccupation and/or vocation and professional interest. To aggregate on one place various experts, from the Academy and Universities, from the business circles and companies who are preoccupied with power energy directly or indirectly in their everyday life and work. During the Symposium more than 90 scientific and/or professional papers were presented and discussed

  4. International symposium 'Energetics 2004'. Symposium proceedings. Book 1; Megjunarodno sovetuvanje 'Energetika 2004'. Zbornik na referati. Kniga 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The holding of this Symposium was initiated by ZEMAK - Macedonian Energy Association that for the last tens of years established itself in the national and international scientific and professional circles as a competent association of professionals with the main goal to follow, promote and improve the energy sector in the country. Having in mind the fact that the power energy sector as a fundamental sector plays a main role in the development and the improvement of the rest of the industry, and in the same time has a tremendous impact on the sustainable development of the entire economy of a country, power energy sector in fact has the paramount importance in the business environment of our country. Thus, ZEMAK has historically important role as a responsible and permanent driver, promoter and initiator for resolving of all-important questions directly or indirectly interconnected with the power energy sector in the country, and therefore the entire economy in the country as well. Following the past, ZEMAK had and would always have needs of organizing national and international symposiums and workshops as a panel where directly at one place national and international power energy experts could initiate, debate and resolve all up-to-date questions in the present energy sector in Macedonia, could analyze the modern world trends in the energy sector and try to find appropriate models for their application for further development and improvement of the energy sector in our country. This international symposium has the main goal to concentrate on a single place everybody who has power energy as a permanent preoccupation and/or vocation and professional interest. To aggregate on one place various experts, from the Academy and Universities, from the business circles and companies who are preoccupied with power energy directly or indirectly in their everyday life and work. During the Symposium more than 90 scientific and/or professional papers were presented and discussed

  5. Combustion and utilization of low calorific value gases (LCVG)

    Energy Technology Data Exchange (ETDEWEB)

    Kishore, Puneet; Ray, Anjan

    2010-09-15

    Combustion becomes increasingly difficult / inefficient / impossible with decrease in hydrocarbon content / calorific value of gas with available technologies. Through analysis it was postulated that Low Calorific Value Gas would be combustible with Oxygen in existing burner equipment with minor changes, and experimentally tested in the laboratory. The broad conclusion is that LCVG (with 8% or more Hydrocarbon content) could be combusted as efficiently as a normal High CV natural gas. This creates opportunity to translate significant promise and potential of LCVG from a variety of un-conventional sources globally into reliable long term energy resources.

  6. 2016 AMS Mario J. Molina Symposium

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Renyi [Texas A & M Univ., College Station, TX (United States)

    2016-11-29

    A named symposium to honor Dr. Mario J. Molina was held 10–14 January 2016, as part of the 96th American Meteorological Society (AMS) Annual Meeting in New Orleans, Louisiana. Dr. Molina first demonstrated that industrially produced chlorofluorocarbons (CFCs) decompose in the stratosphere and release chlorine atoms, leading to catalytic ozone destruction. His research in stratospheric chemistry was instrumental to the establishment of the 1987 United Nations Montreal Protocol to ban ozone-depleting substances worldwide. Dr. Molina’s contributions to preserving the planet Earth not only save the atmospheric ozone layer, but also protect the climate by reducing the emissions of greenhouse gases. He was awarded the 1995 Nobel Prize in Chemistry for his pioneering research in understanding the stratospheric ozone loss mechanism. In 2013, President Barack Obama announced Dr. Molina as a recipient of the Presidential Medal of Freedom. The 2016 AMS Molina Symposium honored Dr. Molina’s distinguished contributions to research related to atmospheric chemistry. The symposium contained an integrated theme related to atmospheric chemistry, climate, and policy. Dr. Molina delivered a keynote speech at the Symposium. The conference included invited keynote speeches and invited and contributed oral and poster sessions, and a banquet was held on Tuesday January 12, 2016. The symposium covered all aspects of atmospheric chemistry, with topics including (1) Stratospheric chemistry, (2) Tropospheric chemistry, (3) Aerosol nucleation, growth, and transformation, (4) Aerosol properties, (5) Megacity air pollution, and (6) Atmospheric chemistry laboratory, field, and modeling studies. This DOE project supported 14 scientists, including graduate students, post docs, junior research scientists, and non-tenured assistant professors to attend this symposium.

  7. Modification of combustion aerosols in the atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Weingartner, E [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1996-07-01

    Combustion aerosols particles are released on large scale into the atmosphere in the industrialized regions as well as in the tropics (by wood fires). The particles are subjected to various aging processes which depend on the size, morphology, and chemical composition of the particles. The interaction of combustion particles with sunlight and humidity as well as adsorption and desorption of volatile material to or from the particles considerably changes their physical and chemical properties and thus their residence time in the atmosphere. This is of importance because combustion particles are known to have a variety of health effects on people. Moreover, atmospheric aerosol particles have an influence on climate, directly through the reflection and absorption of solar radiation and indirectly through modifying the optical properties and lifetime of clouds. In a first step, a field experiment was carried out to study the sources and characteristics of combustion aerosols that are emitted from vehicles in a road tunnel. It was found that most of the fine particles were tail pipe emissions of diesel powered vehicles. The calculation shows that on an average these vehicles emit about 300 mg fine particulate matter per driven kilometer. This emission factor is at least 100 times higher than the mean emission factor estimated for gasoline powered vehicles. Furthermore, it is found that during their residence time in the tunnel, the particles undergo significant changes: The particles change towards a more compact structure. The conclusion is reached that this is mainly due to adsorption of volatile material from the gas phase to the particle surface. In the atmosphere, the life cycle as well as the radiative and chemical properties of an aerosol particle is strongly dependent on its response to humidity. Therefore the hygroscopic behavior of combustion particles emitted from single sources (i.e. from a gasoline and a diesel engine) were studied in laboratory experiments.

  8. Low emission internal combustion engine

    Science.gov (United States)

    Karaba, Albert M.

    1979-01-01

    A low emission, internal combustion compression ignition engine having a cylinder, a piston movable in the cylinder and a pre-combustion chamber communicating with the cylinder near the top thereof and in which low emissions of NO.sub.x are achieved by constructing the pre-combustion chamber to have a volume of between 70% and 85% of the combined pre-chamber and main combustion chamber volume when the piston is at top dead center and by variably controlling the initiation of fuel injection into the pre-combustion chamber.

  9. 11th AG STAB/DGLR Symposium

    CERN Document Server

    Heinemann, Hans-Joachim; Hilbig, Reinhard

    1999-01-01

    This volume contains the papers of the 11th Symposium of the AG STAB (German Aerospace Aerodynamics Association). In this association those scientists and engineers from universities, research-establishments and industry are involved, who are doing research and project work in numerical and experimental fluid mechanics and aerodynamics for aerospace and other applications. Many of the contributions are giving results from the "Luftfahrtforschungsprogramm der Bundesregierung (German Aeronautical Research Programme). Some of the papers report on work sponsored by the Deutsche Forschungsgemeinschaft, DFG, which also was presented at the symposium. The volume gives a broad overview over the ongoing work in this field in Germany.

  10. Transport arrangements for the scientific symposium

    CERN Multimedia

    2000-01-01

    Parking in the region of building 180 will be severely restricted during the LEPFest scientific symposium of 10-11 October, and a special bus service will operate to ferry people to and from the event. From 8:00 am, buses will leave the reception at building 33, stop to pickup passengers outside the hostels (buildings 38 and 39), and drop people off at the symposium venue - building 180. At the end of each day’s proceedings, the buses will bring people back, and through out the day a shuttle service will operate around every 15-20 minutes. Attendees are strongly recommended to use the buses.

  11. Outcome of UNIDO symposium on biomass energy

    International Nuclear Information System (INIS)

    Nazemi, A.H.

    1997-01-01

    The results of the UNIDO symposium are presented. The symposium covered a variety of subjects, beginning with a comparison of biomass energy production and potential uses in different regions, specific country case studies about the present situation and trends in biomass energy utilisation. Technological aspects discussed included the production of biomass resources, their conversion into energy carriers and technology transfer to developing countries. An analysis of financial resources available and mechanisms for funding biomass projects were given. Environmental effects and some relatively successful biomass projects under development were described. (K.A.)

  12. Proceedings of the international symposium NUCEF 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-08-01

    Japan Atomic Energy Research Institute (JAERI) held the international symposium NUCEF 2005 at Techno Community Square RICOTTI in Tokai-mura on February 9 and 10, 2005. This symposium was co-organized by Japan Nuclear Cycle Development Institute (JNC), and Nuclear Fuel Cycle Safety Research Committee authorized the program. Two hundred thirty-nine participants from 11 countries presented fifty-nine papers, and discussed recent research activities and its outputs on waste disposal safety, fuel cycle facility safety including criticality safety, and separation process development. The presented papers are compiled in the proceedings. (author)

  13. Symposium on high temperature and materials chemistry

    International Nuclear Information System (INIS)

    1989-10-01

    This volume contains the written proceedings of the Symposium on High Temperature and Materials Chemistry held in Berkeley, California on October 24--25, 1989. The Symposium was sponsored by the Materials and Chemical Sciences Division of Lawrence Berkeley Laboratory and by the College of Chemistry of the University of California at Berkeley to discuss directions, trends, and accomplishments in the field of high temperature and materials chemistry. Its purpose was to provide a snapshot of high temperature and materials chemistry and, in so doing, to define status and directions

  14. Quality assurance and demolition: 2006 symposium

    International Nuclear Information System (INIS)

    Thierfeldt, S.

    2006-01-01

    The '2006 Symposium: Quality Assurance and Demolition' jointly organized by compra GmbH and Brenk Systemplanung GmbH this year again focused on quality assurance and the demolition of nuclear facilities as its main topics. The papers presented ranged from issues of clearance and disposal to demolition technologies and status reports about specific demolition projects. The sixteen presentations at the '2006 Symposium: Quality Assurance and Demolition' offered an interesting and very topical cross section of decommissioning and demolition of nuclear facilities in Germany. In 2007, the conference about similar main topics will again be held at the Schloss Bensberg Grand Hotel. (orig.)

  15. Eleventh symposium on energy engineering sciences: Proceedings

    International Nuclear Information System (INIS)

    1993-01-01

    The Eleventh Symposium on Energy Engineering Sciences was held on May 3--5, 1993, at the Argonne National Laboratory, Argonne, Illinois. These proceedings include the program, list of participants, and the papers that were presented during the eight technical sessions held at this meeting. This symposium was organized into eight technical sessions: Surfaces and interfaces; thermophysical properties and processes; inelastic behavior; nondestructive characterization; multiphase flow and thermal processes; optical and other measurement systems; stochastic processes; and large systems and control. Individual projects were processed separately for the databases

  16. Symposium on high temperature and materials chemistry

    Energy Technology Data Exchange (ETDEWEB)

    1989-10-01

    This volume contains the written proceedings of the Symposium on High Temperature and Materials Chemistry held in Berkeley, California on October 24--25, 1989. The Symposium was sponsored by the Materials and Chemical Sciences Division of Lawrence Berkeley Laboratory and by the College of Chemistry of the University of California at Berkeley to discuss directions, trends, and accomplishments in the field of high temperature and materials chemistry. Its purpose was to provide a snapshot of high temperature and materials chemistry and, in so doing, to define status and directions.

  17. 2. symposium energy crops 2009; 2. Symposium Energiepflanzen 2009

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-27

    Within the meeting '2nd Symposium energy plants 2009', held at 17th to 18th November, 2009, in Berlin (Federal Republic of Germany), the following lectures were held: (1) The bio energy policy of the Federal Government in the area of attention between climatic protection, ecology and economy (Ilse Aigner); (2) Chances and threatens of cultivation of energy plants for a sustainable energy supply (Alois Heissenhuber); (3) Certification as a prerequisite of the global exploration of bio energy (Andreas Feige); (4) A project support in the field of cultivation of energy plants, a review (Andreas Schuette); (5) Results from the investigation of the crop rotation in the EVA network (Armin Vater); (6) Optimisation of the cultivation technology of sorghum millets (Christian Roehricht); (7) The two-culture utilization system - a comparison between ecologic and conventional cultivation (Reinhold Stuelpnagel); (8) Crop rotation with energy plants - Chances and threatens for the plant protection (Baerbel Gerowitt); (9) Efficiency of utilization of water for energy plants (Siegfried Schittenhelm); (10) Utilization of arable food grasses and permanent grassland as a substrate for biogas (Matthias Benke); (11) Economical evaluation of plant fermentation substrates (Dominik Reus); (12) Energy plants as a challenge for the agricultural engineering (Heiner Bruening); (13) Influence of the design of cultivation on the subsequent effects of the cultivation of energy plants (Michael Glemnitz); (14) Energy plants and waters protection - Key aspects and possible options of action (Heike Nitsch); (15) Neophytes as energy plants - Chances and threatens (Werner Kuhn); (16) Manifold in te landscape - extensive cultivation systems with renewable raw materials as an option for nature protection? (Peer Heck); (17) Ecologic aspects of agro forestry systems (Holger Gruenewald); (18) Enhancement of the potential of energy yield of winter wheat (Wolfgang Friedt); (19) Interspersed silphie

  18. Hydrogen assisted diesel combustion

    Energy Technology Data Exchange (ETDEWEB)

    Lilik, Gregory K.; Boehman, Andre L. [The EMS Energy Institute, The Pennsylvania State University, University Park, PA 16802 (United States); Zhang, Hedan; Haworth, Daniel C. [Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA 16802 (United States); Herreros, Jose Martin [Escuela Tecnica Superior de Ingenieros Industriales, Universidad de Castilla La-Mancha, Avda. Camilo Jose Cela s/n, 13071 Ciudad Real (Spain)

    2010-05-15

    Hydrogen assisted diesel combustion was investigated on a DDC/VM Motori 2.5L, 4-cylinder, turbocharged, common rail, direct injection light-duty diesel engine, with a focus on exhaust emissions. Hydrogen was substituted for diesel fuel on an energy basis of 0%, 2.5%, 5%, 7.5%, 10% and 15% by aspiration of hydrogen into the engine's intake air. Four speed and load conditions were investigated (1800 rpm at 25% and 75% of maximum output and 3600 rpm at 25% and 75% of maximum output). A significant retarding of injection timing by the engine's electronic control unit (ECU) was observed during the increased aspiration of hydrogen. The retarding of injection timing resulted in significant NO{sub X} emission reductions, however, the same emission reductions were achieved without aspirated hydrogen by manually retarding the injection timing. Subsequently, hydrogen assisted diesel combustion was examined, with the pilot and main injection timings locked, to study the effects caused directly by hydrogen addition. Hydrogen assisted diesel combustion resulted in a modest increase of NO{sub X} emissions and a shift in NO/NO{sub 2} ratio in which NO emissions decreased and NO{sub 2} emissions increased, with NO{sub 2} becoming the dominant NO{sub X} component in some combustion modes. Computational fluid dynamics analysis (CFD) of the hydrogen assisted diesel combustion process captured this trend and reproduced the experimentally observed trends of hydrogen's effect on the composition of NO{sub X} for some operating conditions. A model that explicitly accounts for turbulence-chemistry interactions using a transported probability density function (PDF) method was better able to reproduce the experimental trends, compared to a model that ignores the influence of turbulent fluctuations on mean chemical production rates, although the importance of the fluctuations is not as strong as has been reported in some other recent modeling studies. The CFD results confirm

  19. Combustion characteristics of the mustard methyl esters

    International Nuclear Information System (INIS)

    Bannikov, M.G.; Vasilev, I.P.

    2011-01-01

    Mustard Methyl Esters (further bio diesel) and regular diesel fuel were tested in direct injection diesel engine. Analysis of experimental data was supported by an analysis of fuel injection and combustion characteristics. Engine fuelled with bio diesel had increased brake specific fuel consumption, reduced nitrogen oxides emission and smoke opacity, moderate increase in carbon monoxide emission with essentially unchanged unburned hydrocarbons emission. Increase in fuel consumption was attributed to lesser heating value of bio diesel and partially to decreased fuel conversion efficiency. Analysis of combustion characteristics revealed earlier start of injection and shorter ignition delay period of bio diesel. Resulting decrease in maximum rate of heat release and cylinder pressure was the most probable reason for reduced emission of nitrogen oxides. Analysis of combustion characteristics also showed that cetane index determined by ASTM Method D976 is not a proper measure of ignition quality of bio diesel. Conclusion was made on applicability of mustard oil as a source for commercial production of bio diesel in Pakistan. Potentialities of on improving combustion and emissions characteristics of diesel engine by reformulating bio diesel were discussed. (author)

  20. 40 CFR 60.1370 - What records must I keep for municipal waste combustion units that use activated carbon?

    Science.gov (United States)

    2010-07-01

    ... waste combustion unit at your plant. Include supporting calculations. (b) Records of low carbon feed... waste combustion units that use activated carbon? 60.1370 Section 60.1370 Protection of Environment... SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is...

  1. 40 CFR 60.1200 - What are the operating practice requirements for my municipal waste combustion unit?

    Science.gov (United States)

    2010-07-01

    ... requirements for my municipal waste combustion unit? 60.1200 Section 60.1200 Protection of Environment... SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is... Good Combustion Practices: Operating Requirements § 60.1200 What are the operating practice...

  2. 40 CFR 60.1690 - What are the operating practice requirements for my municipal waste combustion unit?

    Science.gov (United States)

    2010-07-01

    ... requirements for my municipal waste combustion unit? 60.1690 Section 60.1690 Protection of Environment... SOURCES Emission Guidelines and Compliance Times for Small Municipal Waste Combustion Units Constructed on or Before August 30, 1999 Model Rule-Good Combustion Practices: Operating Requirements § 60.1690 What...

  3. 40 CFR 60.4239 - What are my compliance requirements if I am a manufacturer of stationary SI internal combustion...

    Science.gov (United States)

    2010-07-01

    ... I am a manufacturer of stationary SI internal combustion engines >19 KW (25 HP) that use gasoline or... NEW STATIONARY SOURCES Standards of Performance for Stationary Spark Ignition Internal Combustion... manufacturer of stationary SI internal combustion engines >19 KW (25 HP) that use gasoline or a manufacturer of...

  4. Proceedings of the Third Annual Student Symposium on Marine Affairs (University of Hawaii, Manoa Campus, January 13, 1978).

    Science.gov (United States)

    1978

    This volume of the proceedings of the Third Annual Student Symposium on Marine Affairs contains 32 papers in eight categories: (1) coastal zone management; (2) marine resources; (3) aquaculture; (4) alternative marine energy sources; (5) ocean engineering; (6) recreational facilities; (7) marine biology; and (8) options. The papers are the…

  5. Final Report: 8th International Symposium on Neutron Capture Therapy (NCT) for Cancer, May 15, 1998 - May 15, 1999

    International Nuclear Information System (INIS)

    Hawthorne, M.F.

    1999-01-01

    The 8th International Symposium on Neutron Capture Therapy for Cancer (8th ISNCTC) was held in La Jolla, CA on Sept. 13-18, 1998. This biennial meeting of the International Society for Neutron Capture Therapy (ISNCT) was hosted by Society President M.F. Hawthorne (UCLA Dept. of Chemistry and Biochemistry). The Symposium brought together scientists (300 registrants from 21 countries) from diverse fields to report the latest developments in NCT. Topics of the 275 papers presented (30 plenary lectures, 81 oral presentations, and 164 posters) included the physics of neutron sources, chemistry of tumor-targeting agents, dosimetry, radiobiological studies, and clinical applications

  6. Senior expert symposium on electricity and the environment, Helsinki, Finland, 13-17 May 1991. Key issues papers

    International Nuclear Information System (INIS)

    1991-07-01

    This volume contains the four Key Issues Papers prepared as background papers by international expert groups for the Senior Expert Symposium on Electricity and the Environment held in Helsinki, Finland in May 1991. The papers are on topics selected as the central themes of the symposium: energy and electricity supply and demand - implications for the global environment; energy sources and technologies for electricity generation; comparative environmental and health effects of different energy systems for electricity generation; and the incorporation of environmental and health impacts into policy, planning and decision making for the electricity sector. The four papers have been indexed separately. Refs, figs and tabs

  7. Symposium report of Inter-COE international symposium on energy systems

    International Nuclear Information System (INIS)

    2006-10-01

    The symposium of the title aims to discuss a comprehensive possibility of energy system technologies for future society utilizing both specialties of five COEs in energy technology field. The symposium topics include, 'Primary energy production', 'Energy conversion, storage and transportation', 'Energy materials', 'Energy system' by specialists from the COEs. Posters were presented by doctoral course students and others in the COEs, in addition special session 'Energy Research and Human Resources Development'. (J.P.N.)

  8. Aerosols from biomass combustion

    Energy Technology Data Exchange (ETDEWEB)

    Nussbaumer, T.

    2001-07-01

    This report is the proceedings of a seminar on biomass combustion and aerosol production organised jointly by the International Energy Agency's (IEA) Task 32 on bio energy and the Swiss Federal Office of Energy (SFOE). This collection of 16 papers discusses the production of aerosols and fine particles by the burning of biomass and their effects. Expert knowledge on the environmental impact of aerosols, formation mechanisms, measurement technologies, methods of analysis and measures to be taken to reduce such emissions is presented. The seminar, visited by 50 participants from 11 countries, shows, according to the authors, that the reduction of aerosol emissions resulting from biomass combustion will remain a challenge for the future.

  9. Plasma Assisted Combustion

    Science.gov (United States)

    2007-02-28

    Tracking an individual streamer branch among others in a pulsed induced discharge J. Phys. D: Appl. Phys. 35 2823--9 [29] van Veldhuizen E M and Rutgers...2005) AIAA–2005–0405. [99] E.M. Van Veldhuizen (ed) Electrical Discharges for Environmental Purposes: Fun- damentals and Applications (New York: Nova...Vandooren J, Van Tiggelen P J 1977 Reaction Mechanism and Rate Constants in Lean Hydrogen–Nitrous Oxide Flames Combust. Flame 28 165 [201] Dean A M, Steiner

  10. Fluid-bed combustion

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, G.; Schoebotham, N.

    1981-02-01

    In Energy Equipment Company's two-stage fluidized bed system, partial combustion in a fluidized bed is followed by burn-off of the generated gases above the bed. The system can be retrofitted to existing boilers, and can burn small, high ash coal efficiently. It has advantages when used as a hot gas generator for process drying. Tests on a boiler at a Cadbury Schweppes plant are reported.

  11. Combustion science and engineering

    CERN Document Server

    Annamalai, Kalyan

    2006-01-01

    Introduction and Review of Thermodynamics Introduction Combustion Terminology Matter and Its Properties Microscopic Overview of Thermodynamics Conservation of Mass and Energy and the First Law of Thermodynamics The Second Law of Thermodynamics Summary Stoichiometry and Thermochemistry of Reacting Systems Introduction Overall Reactions Gas Analyses Global Conservation Equations for Reacting Systems Thermochemistry Summary Appendix Reaction Direction and Equilibrium Introduction Reaction Direction and Chemical Equilibrium Chemical Equilibrium Relations Vant Hoff Equation Adi

  12. Proceedings of the 1981 symposium on instrumentation and control for fossil-energy processes

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    The 1981 symposium on instrumentation and control for fossil-energy processes was held June 8-10, 1981, at the Sheraton-Palace Hotel, San Francisco, California. It was sponsored by the US Department of Energy; Office of Fossil Energy; Argonne National Laboratory; and the Society for Control and Instrumentation of Energy Processes. Sixty-seven articles from the proceedings have been entered individually into EDB and ERA; thirteen articles had been entered previously from other sources. (LTN)

  13. Technologically enhanced natural radiation (TENR II). Proceedings of an international symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-02-01

    Natural radiation is ubiquitous. In recent decades, there has been a developing interest in fully documenting exposure of human beings to radiation of natural origin. Radiation experts have recognized that natural sources of radiation can cause exposure of members of the general public and workers to levels that warrant consideration of whether controls should be applied. The second International Symposium on Technologically Enhanced Natural Radiation (TENR II) was held in Rio de Janeiro from 12 to 17 September 1999. The objective of the symposium was to provide a forum for the international exchange of information on the scientific and technical aspects of those components of exposure to natural radiation that warrant consideration. These components were examined under the headings: the technological enhancement of natural radiation in mining and non-nuclear industries; radon indoors and outdoors; mobility and transfer of natural radionuclides; natural radiation and health effects; analytical techniques and methodologies; the remediation of contaminated sites; and regulatory and legal aspects. The symposium found that exposures to natural sources of radiation should be considered from the point of view of their amenability to control. This approach is reflected in the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS) and the associated IAEA documents on occupational exposure and rehabilitation of contaminated lands. The concepts of exclusion and intervention are particularly relevant to the amenability to control of natural sources of radiation. Indeed, the BSS specify that any exposure whose magnitude is essentially unamenable to control through the requirements of the BSS is out of the scope of the BSS. The BSS further indicate that protective or remedial actions shall be undertaken whenever they are justified in terms of the benefit to be obtained. Following their deliberations, the

  14. Issues in waste combustion

    Energy Technology Data Exchange (ETDEWEB)

    Gustavsson, Lennart; Robertson, Kerstin; Tullin, Claes [Swedish National Testing and Research Inst., Boraas (Sweden); Sundquist, Lena; Wrangensten, Lars [AaF-Energikonsult AB, Stockholm (Sweden); Blom, Elisabet [AaF-Processdesign AB, Stockholm (Sweden)

    2003-05-01

    The main purpose of this review is to provide an overview of the state-of-the-art on research and development issues related to waste combustion with relevance for Swedish conditions. The review focuses on co-combustion in grate and fluidised bed furnaces. It is primarily literature searches in relevant databases of scientific publications with to material published after 1995. As a complement, findings published in different report series, have also been included. Since the area covered by this report is very wide, we do not claim to cover the issues included completely and it has not been possitile to evaluate the referred studies in depth. Basic knowledge about combustion issues is not included since such information can be found elsewhere in the literature. Rather, this review should be viewed as an overview of research and development in the waste-to-energy area and as such we hope that it will inspire scientists and others to further work in relevant areas.

  15. Historical perspective of the H- Ion Source Symposia

    International Nuclear Information System (INIS)

    Schmidt, C.W.

    1997-11-01

    The International Symposium on the Production and Neutralization of Negative Hydrogen Ions and Beams is entering its third decade of providing a forum for the H - ion source community. The first meeting was held at Brookhaven National Laboratory in 1977 and has returned there every three years to 1995. This is the eighth meeting in this series and for the first time is in Europe, hosted by CEA/Center de Cadarache. Since this Symposium is meeting in Europe many new people have had an opportunity to attend and many of these are of a younger generation. On the 20th anniversary of the First Symposium it seems fitting that a historical review should be given. The Symposium meetings and its archiving of information has been a valuable asset to this community. I hope to briefly describe the early H - source work and provide some insight into the success of the H - source effort

  16. Historical perspective of the H- ion source symposia

    International Nuclear Information System (INIS)

    Schmidt, C.W.

    1998-01-01

    The International Symposium on the Production and Neutralization of Negative Hydrogen Ions and Beams is entering its third decade of providing a forum for the H - ion source community. The first meeting was held at Brookhaven National Laboratory in 1977 and has returned there every three years to 1995. This is the eighth meeting in this series and for the first time is in Europe, hosted by CEA/Center de Cadarache. Since this Symposium is meeting in Europe many new people have had an opportunity to attend and many of these are of a younger generation. On the 20th anniversary of the First Symposium it seems fitting that a historical review should be given. The Symposium meetings and its archiving of information has been a valuable asset to this community. I hope to briefly describe the early H - source work and provide some insight into the success of the H - source effort. copyright 1998 American Institute of Physics

  17. Historical perspective of the H- ion source symposia

    International Nuclear Information System (INIS)

    Schmidt, C. W.

    1998-01-01

    The International Symposium on the Production and Neutralization of Negative Hydrogen Ions and Beams is entering its third decade of providing a forum for the H - ion source community. The first meeting was held at Brookhaven National Laboratory in 1977 and has returned there every three years to 1995. This is the eighth meeting in this series and for the first time is in Europe, hosted by CEA/Center de Cadarache. Since this Symposium is meeting in Europe many new people have had an opportunity to attend and many of these are of a younger generation. On the 20th anniversary of the First Symposium it seems fitting that a historical review should be given. The Symposium meetings and its archiving of information has been a valuable asset to this community. I hope to briefly describe the early H - source work and provide some insight into the success of the H - source effort

  18. Modern trends in radiopharmaceuticals for diagnosis and therapy. Proceedings of a symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-08-01

    The IAEA held an International Symposium on Modern Trends in Radiopharmaceuticals for Diagnosis and Therapy in Lisbon, Portugal, from 30 March to 3 April 1998. Two earlier symposia were organized on similar topics in Copenhagen, Denmark in 1973 and in Tokyo, Japan, in 1984. The proceedings of these symposia have been published and widely used as reference sources. To facilitate faster publication and more widespread availability, the IAEA has decided to publish the proceedings of this symposium as a cost-free TECDOC. The symposium was organized into 14 sessions consisting of five on {sup 99m}Tc radiopharmaceuticals, two each on therapeutic radiopharmaceuticals and radiohalogens/other isotopes and one each on bioevaluation, radiometric assay, medical isotope production, good radiopharmacy practice and technology transfer. In the proceedings the papers from multiple sessions on the same topic have been grouped together for the convenience of the reader. The papers presented in the symposium reflect current and future developments in diagnostic and therapeutic agents. The largest number of papers presented dealt with {sup 99m}Tc, highlighting its continuing importance to nuclear medicine and the role of imaging as an important tool. The emerging interest in therapeutic radiopharmaceuticals based on beta emitting short lived isotopes such as {sup 186}Re and {sup 153}Sm was evident from the papers presented in two sessions devoted to this topic. Also of steady interest was the development of agents labelled with other established isotopes, radioiodine in particular and also {sup 111}In and {sup 67}Ga. Regulation, training and good manufacturing practices are important for ensuring safety in regular use of radiopharmaceuticals and were discussed in a separate session. The production of radiopharmaceuticals has become a regular activity in many developing countries, often facilities were presented at the symposium Refs, figs, tabs

  19. Modern trends in radiopharmaceuticals for diagnosis and therapy. Proceedings of a symposium

    International Nuclear Information System (INIS)

    1998-08-01

    The IAEA held an International Symposium on Modern Trends in Radiopharmaceuticals for Diagnosis and Therapy in Lisbon, Portugal, from 30 March to 3 April 1998. Two earlier symposia were organized on similar topics in Copenhagen, Denmark in 1973 and in Tokyo, Japan, in 1984. The proceedings of these symposia have been published and widely used as reference sources. To facilitate faster publication and more widespread availability, the IAEA has decided to publish the proceedings of this symposium as a cost-free TECDOC. The symposium was organized into 14 sessions consisting of five on 99m Tc radiopharmaceuticals, two each on therapeutic radiopharmaceuticals and radiohalogens/other isotopes and one each on bioevaluation, radiometric assay, medical isotope production, good radiopharmacy practice and technology transfer. In the proceedings the papers from multiple sessions on the same topic have been grouped together for the convenience of the reader. The papers presented in the symposium reflect current and future developments in diagnostic and therapeutic agents. The largest number of papers presented dealt with 99m Tc, highlighting its continuing importance to nuclear medicine and the role of imaging as an important tool. The emerging interest in therapeutic radiopharmaceuticals based on beta emitting short lived isotopes such as 186 Re and 153 Sm was evident from the papers presented in two sessions devoted to this topic. Also of steady interest was the development of agents labelled with other established isotopes, radioiodine in particular and also 111 In and 67 Ga. Regulation, training and good manufacturing practices are important for ensuring safety in regular use of radiopharmaceuticals and were discussed in a separate session. The production of radiopharmaceuticals has become a regular activity in many developing countries, often facilities were presented at the symposium

  20. The Diesel Combustion Collaboratory: Combustion Researchers Collaborating over the Internet

    Energy Technology Data Exchange (ETDEWEB)

    C. M. Pancerella; L. A. Rahn; C. Yang

    2000-02-01

    The Diesel Combustion Collaborator (DCC) is a pilot project to develop and deploy collaborative technologies to combustion researchers distributed throughout the DOE national laboratories, academia, and industry. The result is a problem-solving environment for combustion research. Researchers collaborate over the Internet using DCC tools, which include: a distributed execution management system for running combustion models on widely distributed computers, including supercomputers; web-accessible data archiving capabilities for sharing graphical experimental or modeling data; electronic notebooks and shared workspaces for facilitating collaboration; visualization of combustion data; and video-conferencing and data-conferencing among researchers at remote sites. Security is a key aspect of the collaborative tools. In many cases, the authors have integrated these tools to allow data, including large combustion data sets, to flow seamlessly, for example, from modeling tools to data archives. In this paper the authors describe the work of a larger collaborative effort to design, implement and deploy the DCC.

  1. Internal combustion engine using premixed combustion of stratified charges

    Science.gov (United States)

    Marriott, Craig D [Rochester Hills, MI; Reitz, Rolf D [Madison, WI

    2003-12-30

    During a combustion cycle, a first stoichiometrically lean fuel charge is injected well prior to top dead center, preferably during the intake stroke. This first fuel charge is substantially mixed with the combustion chamber air during subsequent motion of the piston towards top dead center. A subsequent fuel charge is then injected prior to top dead center to create a stratified, locally richer mixture (but still leaner than stoichiometric) within the combustion chamber. The locally rich region within the combustion chamber has sufficient fuel density to autoignite, and its self-ignition serves to activate ignition for the lean mixture existing within the remainder of the combustion chamber. Because the mixture within the combustion chamber is overall premixed and relatively lean, NO.sub.x and soot production are significantly diminished.

  2. 4. Danish symposium in analytical chemistry

    International Nuclear Information System (INIS)

    1996-01-01

    At the 4th Danish Symposium of Analytical Chemistry 11 lectures and 32 posters were presented during two session days on the 20 and 21 August 1996. Various analytical techniques were discussed for foodstuff, pesticide, pharmaceutical, industrial and other analyses. (EG)

  3. Proceedings of radiation and occupational health Symposium

    International Nuclear Information System (INIS)

    Ng Kwan Hoong

    1995-07-01

    This book compiled the papers presented at this symposium. The were papers on policy of radiation safety regulations, radiation safety measures, radiation in medicine and radiation protection, radiation measurements, radon measurement, radiation in petroleum industry, radiation monitoring and non ionizing radiation safety

  4. 12th International Symposium Continuous Surface Mining

    CERN Document Server

    2015-01-01

    This edited volume contains research results presented at the 12th International Symposium Continuous Surface Mining, ISCSM Aachen 2014. The target audience primarily comprises researchers in the lignite mining industry and practitioners in this field but the book may also be beneficial for graduate students.

  5. SIAM symposium on control problems in industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    This symposium focused on industrial control applications that have benefited from recent mathematical and technological developments. The themes featured included: applications of control techniques in aerospace industry, automotive industry, environmental sciences, manufacturing processes, and petroleum industry; optimal shape design in aerospace applications; optimal design of micro-optics; robust control and H-infinity methods.

  6. The seventh international symposium on radiopharmacology

    International Nuclear Information System (INIS)

    1991-01-01

    Abstracts are presented from the symposium on radiopharmacology. Sessions included: pharmokinetics of Tc-99m labeled agents; pharmokinetics and tumor imaging; miscellaneous pharmokinetic studies; pharmokinetics of brain/receptor imaging; pharmokinetics of radiolabeled antibodies; pharmokinetics of radiolabeled lipids; pharmokinetics of heart/infection imaging. Individual reports are processed separately for the databases

  7. 7th International Symposium on Gaseous Dielectrics

    CERN Document Server

    James, David

    1994-01-01

    The Seventh International Symposium on Gaseous Dielectrics was held in Knoxville, Tennessee, U. S. A. , on April 24-28, 1994. The symposium continued the interdisciplinary character and comprehensive approach of the preceding six symposia. Gaseous DielecIries VII is a detailed record of the symposium proceedings. It covers recent advances and developments in a wide range of basic, applied and industrial areas of gaseous dielectrics. It is hoped that Gaseous DielecIries VII will aid future research and development in, and encourage wider industrial use of, gaseous dielectrics. The Organizing Committee of the Seventh International Symposium on Gaseous Dielectrics consisted of G. Addis (U. S. A. ), L. G. Christophorou (U. S. A. ), F. Y. Chu (Canada), A. H. Cookson (U. S. A. ), O. Farish (U. K. ), I. Gallimberti (Italy) , A. Garscadden (U. S. A. ), D. R. James (U. S. A. ), E. Marode (France), T. Nitta (Japan), W. Pfeiffer (Germany), Y. Qiu (China), I. Sauers (U. S. A. ), R. J. Van Brunt (U. S. A. ), and W. Zaengl...

  8. 8. European sewage and refuse symposium. Documentation

    International Nuclear Information System (INIS)

    1990-01-01

    The subject of the 8. European Sewage and Refuse Symposium is covered under the following headings: collection and control in sewers, industrial waste water management, pretreatment, combined treatment, special cases, industrial waste water sludges disposal and the European waste business. (orig./BBR)

  9. Proceedings of the International Symposium on Biotechnology

    International Nuclear Information System (INIS)

    2008-01-01

    This is a book of abstracts of oral communications and posters that were presented during the International Symposium on Biotechnology that was held in Sfax, Tunisia from May 4th to 8th, 2008. The following themes were covered : - Biotechnology for animal and human health and biopharmaceuticals; - Microbial and environmental biotechnology; - Agricultural, Food and marine biotechnology

  10. Symposium on Massive Open Online Courses

    Science.gov (United States)

    Krause, Steven D.; Rice, Jeff

    2013-01-01

    In this Symposium focused on MOOCs, this journal carries forward a tradition of attending to the technologies associated with composing and the teaching of composing. In the May 1983 issue of "College Composition and Communication," for example, most of the articles focus on composing and include a mix of inquiries, from Jack Selzer's on the…

  11. First symposium accelerated partial breast irradiation

    International Nuclear Information System (INIS)

    2012-01-01

    The First symposium accelerated partial breast irradiation, was organized by the Marie Curie Foundation, between the 14 to 16 june 2012, in the Cordoba city of Argentina. In this event were presented some papers on the following topics: radiotherapy in breast cancer; interaction between systemic treatments and radiotherapy; interstitial brachytherapy.

  12. Second invitational well-testing symposium proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-01

    The symposium dealt with the state of the art of injection of fluids underground, and its application to geothermal systems in particular. Separate abstracts were prepared for fourteen papers and three abstracts of papers were listed by title. Three papers were previously abstracted for EDB.

  13. Highlights of the heavy ion fusion symposium

    International Nuclear Information System (INIS)

    Keefe, D.

    1986-01-01

    The current status and prospects for inertial confinement fusion based on the use of intense beams of heavy ions will be described in the light of results presented at the International Symposium on Heavy Ion Fusion, (Washington, DC, May 27-29, 1986)

  14. Highlights of the heavy ion fusion symposium

    International Nuclear Information System (INIS)

    Keefe, D.

    1986-07-01

    The current status and prospects for inertial confinement fusion based on the use of intense beams of heavy ions will be described in the light of results presented at the International Symposium on Heavy Ion Fusion, (Washington, DC, May 27-29, 1986)

  15. The ninth international veterinary immunology symposium

    Science.gov (United States)

    This Introduction to the special issue of Veterinary Immunology and Immunopathology summarizes the Proceedings of the 9th International Veterinary Immunology Symposium (9th IVIS) held August, 2010, in Tokyo, Japan. Over 340 delegates from 30 countries discussed research progress analyzing the immune...

  16. The Psychology of Adolescents: Symposium IV A.

    Science.gov (United States)

    Keng, Chiam Heng; Park, Joon Hee

    These two symposium papers provide: (1) a profile of rural adolescents in Malaysia, by Chiam Heng Keng; and (2) report the findings of a study of the psychology and life of Korean children and adolescents, by Joon Hee Park. In the former report, 521 boys and 550 girls completed a checklist consisting of 195 problems and indicated problems which…

  17. Culinary Arts Hospitality Symposium Planning Guide.

    Science.gov (United States)

    Borgie, Karen; Wang, Yeimei

    This guide was developed as part of a project to standardize California's statewide culinary arts curriculum based on industry guidelines and standards. It details a process that California community colleges can use to plan a hospitality symposium that will accomplish the following objectives: provide students with a forum to demonstrate their…

  18. The Wharton Symposium: Facing the Issues.

    Science.gov (United States)

    Sullivan, David M.

    1982-01-01

    A public relations practitioner reports enthusiastically on his return to the campus for an "intellectually-broadening" public relations symposium. He summarizes critical social and economic issues addressed by distinguished scholars and experienced practitioners. For journal availability, see CS 705 902. (PD)

  19. Abstracts: 2nd interventional MRI symposium

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1997-09-01

    Main topics of the 2nd interventional MRI symposium were: MR compatibility and pulse sequences; MR thermometry, biopsy, musculoskeletal system; laser-induced interstitial thermotherapy, radiofrequency ablations; intraoperative MR; vascular applications, breast, endoscopy; focused ultrasound, cryotherapy, perspectives; poster session with 34 posters described. (AJ)

  20. Abstracts: 2nd interventional MRI symposium

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    Main topics of the 2nd interventional MRI symposium were: MR compatibility and pulse sequences; MR thermometry, biopsy, musculoskeletal system; laser-induced interstitial thermotherapy, radiofrequency ablations; intraoperative MR; vascular applications, breast, endoscopy; focused ultrasound, cryotherapy, perspectives; poster session with 34 posters described. (AJ)

  1. 16. International oil field chemistry symposium

    International Nuclear Information System (INIS)

    2006-03-01

    The symposium deals with topics on well chemicals, petrochemicals, well injection fluids, reservoir describing methods, reservoir exploitation enhancing chemicals, corrosion inhibitors, production methods and chemical aspects of maintenance, multiphase flow and reservoir geochemistry. The environmental effects of the chemicals and preservation of the environment is also focussed on. Some aspects of decommissioning of oil fields are dealt with

  2. MEMORIAL SYMPOSIUM:
    Willi Jentschke

    CERN Multimedia

    CERN. Geneva

    2002-01-01

    - Welcome by L. Maiani - Message from DESY by E. Lohrmann - Willi Jentschke by H. Schopper - The Neutral Currents by M. Veltman and D. Perkins - The ISR in Jentschke's time by K. Johnsen - Some recollections of Jentschke by K. WinterNote: Participants are cordially invited to drinks at 17h.30 following the symposium

  3. Aircraft Piston Engine Exhaust Emission Symposium

    Science.gov (United States)

    1976-01-01

    A 2-day symposium on the reduction of exhaust emissions from aircraft piston engines was held on September 14 and 15, 1976, at the Lewis Research Center in Cleveland, Ohio. Papers were presented by both government organizations and the general aviation industry on the status of government contracts, emission measurement problems, data reduction procedures, flight testing, and emission reduction techniques.

  4. Counselling and Career Planning: Symposium V A.

    Science.gov (United States)

    Awang, Amir; And Others

    Focusing generally on counseling and career planning, this symposium provides (1) a review and critique of guidance and counseling in Malaysian schools, by Amir Awang and Latiff Mirasa; (2) a discussion of the needs of Malaysian youth, by Mohd. Yunus Mohd. Noor; and (3) an abstract of the findings of a study of some aspects of student development…

  5. Intergas `95: International unconventional gas symposium. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The International Unconventional Gas Symposium was held on May 14--20, 1995 in Tuscaloosa, Alabama where 52 reports were presented. These reports are grouped in this proceedings under: geology and resources; mine degasification and safety; international developments; reservoir characterization/coal science; and environmental/legal and regulatory. Each report has been processed separately for inclusion in the Energy Science and Technology Database.

  6. Abstracts, Third Space Processing Symposium, Skylab results

    Science.gov (United States)

    1974-01-01

    Skylab experiments results are reported in abstracts of papers presented at the Third Space Processing Symposium. Specific areas of interest include: exothermic brazing, metals melting, crystals, reinforced composites, glasses, eutectics; physics of the low-g processes; electrophoresis, heat flow, and convection demonstrations flown on Apollo missions; and apparatus for containerless processing, heating, cooling, and containing materials.

  7. Development of flameless combustion; Desarrollo de la combustion sin flama

    Energy Technology Data Exchange (ETDEWEB)

    Flores Sauceda, M. Leonardo; Cervantes de Gortari, Jaime Gonzalo [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)]. E-mail: 8344afc@prodigy.net.mx; jgonzalo@servidor.unam.mx

    2010-11-15

    The paper intends contribute to global warming mitigation joint effort that develops technologies to capture the CO{sub 2} produced by fossil fuels combustion and to reduce emission of other greenhouse gases like the NO{sub x}. After reviewing existing combustion bibliography is pointed out that (a) touches only partial aspects of the collective system composed by Combustion-Heat transfer process-Environment, whose interactions are our primary interest and (b) most specialists think there is not yet a clearly winning technology for CO{sub 2} capture and storage. In this paper the study of combustion is focused as integrated in the aforementioned collective system where application of flameless combustion, using oxidant preheated in heat regenerators and fluent gas recirculation into combustion chamber plus appropriated heat and mass balances, simultaneously results in energy saving and environmental impact reduction. [Spanish] El trabajo pretende contribuir al esfuerzo conjunto de mitigacion del calentamiento global que aporta tecnologias para capturar el CO{sub 2} producido por la combustion de combustibles fosiles y para disminuir la emision de otros gases invernadero como NOx. De revision bibliografica sobre combustion se concluye que (a) trata aspectos parciales del sistema compuesto por combustion-proceso de trasferencia de calor-ambiente, cuyas interacciones son nuestro principal interes (b) la mayoria de especialistas considera no hay todavia una tecnologia claramente superior a las demas para captura y almacenaje de CO{sub 2}. Se estudia la combustion como parte integrante del mencionado sistema conjunto, donde la aplicacion de combustion sin flama, empleando oxidante precalentado mediante regeneradores de calor y recirculacion de gases efluentes ademas de los balances de masa y energia adecuados, permite tener simultaneamente ahorros energeticos e impacto ambiental reducido.

  8. 1998 annual report of advanced combustion science utilizing microgravity

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For the purpose of stabilizing energy supply, diversifying energy supply sources and reducing the worsening of global environment caused by combustion exhaust gases, advanced combustion technology was studied and the FY 1998 results were summarized. Following the previous year, the following were conducted: international research jointly with NASA, experiments using microgravity test facilities of Japan Space Utilization Promotion Center (JSUP), evaluation studies made by universities/national research institutes/private companies, etc. In the FY 1998 joint study, a total of 52 drop experiments were carried out on 4 themes using test facilities of Japan Microgravity Center (JAMIC), and 100 experiments were conducted on one theme using test facilities of NASA. In the study using microgravity test facilities, the following were carried out: study of combustion and evaporation of fuel droplets, study of ignition/combustion of fuel droplets in the suspending state, study of combustion of spherical/cylinder state liquid fuels, study of high pressure combustion of binary fuel spray, study of interaction combustion of fuel droplets in the microgravity field, etc. (NEDO)

  9. Topic of nuclear power plant wastes at fifth CMEA symposium on research of fuel and radioactive solution reprocessing

    International Nuclear Information System (INIS)

    Kyrs, M.; Napravnik, J.

    1982-01-01

    A survey is presented of the results of the work of Session 3 of the Symposium held in Marianske Lazne from April 7 to 10, 1981. The participants heard 44 papers mainly related to the following problem areas: existing methods and methods being developed of handling radioactive wastes from nuclear power plants; improvements in the technology of the concentration of liquid wastes by evaporation and other methods; solidification of concentrated liquid wastes into suitable form; methods of the treatment of solid (combustible, non-combustible and compactable) wastes; improvements in methods of the treatment of gaseous effluents. A survey was organized on criteria applied to methods used for radioactive waste processing. The inquiry showed that the principal criteria are the product Quality, costs for waste processing and the release of harmful substances into the environment. (Ha)

  10. Combustion of Waste Wood. Second phase of the collaboration project on waste wood combustion

    International Nuclear Information System (INIS)

    Andersson, Annika; Andersson, Christer; Eriksson, Jan; Hemstroem, Bengt; Jungstedt, Jenny; Kling, Aasa; Bahr, Bo von; Ekvall, Annika; Eskilsson, David; Tullin, Claes; Harnevie, Henrik; Sieurin, Jan; Keihaes, Juha; Mueller, Christian; Berg, Magnus; Wikman, Karin

    2003-08-01

    Combustion of waste wood has during the last decade increased dramatically and this has resulted in a number of Swedish plants using this fuel, e.g. Handeloe P11 (Norrkoeping) and ldbaecken P3 (Nykoeping), and yet other plants that are under construction (e.g. Nynaeshamn). The experience from these plants are that waste wood combustion results in a number of operational problems. To some extent these problems are different compared with the problems related to combustion of other biofuels but the situation is not directly comparable to waste incinerators. The problems are mainly related to slagging and fouling of heat exchanger surfaces and accelerated corrosion at relatively low temperature compared to the situation for ordinary biofuels. In some cases an increase in the emissions of specific substances can also result in difficulties to fulfil the EC-directive on waste combustion. Within previous projects the main problems related to combustion of waste wood have been identified and to some extent the cause of these problems has been clarified. One result of this reported investigation is a deeper understanding of the actual causes of these problems. However, the most important result is a number of recommendations for different measures on how to achieve disturbance-free combustion of waste wood. These recommendations actually summarises the most important possible solutions on how to achieve a disturbance-free operation and a lower maintenance cost for boilers combusting waste wood and can thereby be regarded as a short summery of the whole project: 1) Improving fuel quality by Improved sorting at the source and Sieving of the fuel -> Reducing the amount of metals and chlorine and Separation of fines and thereby reducing the amount of metals. 2) Combustion modifications by Avoiding reducing conditions at the heat exchanger surfaces -> Minimising slagging, fouling and corrosion. 3) Additives or co-combustion by Addition of sulphur with the fuel; Injection of

  11. Proceedings of the third annual underground coal conversion symposium

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-01-01

    The Third Annual Underground Coal Conversion Symposium was held at Fallen Leaf Lake, CA, June 6--9, 1977. It was sponsored by the U.S. Department of Energy and hosted by Lawrence Livermore Laboratory. Forty-one papers have been entered individually into EDB and ERA; ten papers had been entered previously from other sources. The papers cover the in-situ gasification of lignite, subbituminous coal and bituminous coal, in flat lying seams and a steeply dipping beds, at moderate and at greater depths, and describe various technologies of (borehole linking, well spacings, gasifying agents (air, oxygen, steam, hydrogen, including mixtures). Measuring instruments for diagnostic and process control purposes are described. Environmental impacts (ground subsidence and possible groundwater pollution) are the subject of several papers. Finally, mathematical modelling and projected economics of the process are developed. (LTN)

  12. Advances in ''radiation processing''. Repeat of a symposium

    International Nuclear Information System (INIS)

    Drawe, H.

    1984-01-01

    A symposium entitled ''International Meeting on Radiation Processing'' was held in Dubrovnik from 4th to 8th October, 1982. The current status of and the most recent developments in the field of radiation chemistry were presented. In the report presented here the reader is given a critical review of papers presented at the meeting, the following aspects being treated: Radiation measurements and quality control; radiation source technology; environmental application of radiation technology; radiation chemistry as related to nuclear technology; developments in applied polymer chemistry; radiation sterilization; radiation technological aspects in the food industry; low energy electron radiation applications; applied radiation chemistry and physics; bio-compatible materials, radiation plants; engineering economics and process optimization. (orig./RB) [de

  13. Sulfur Chemistry in Combustion I

    DEFF Research Database (Denmark)

    Johnsson, Jan Erik; Glarborg, Peter

    2000-01-01

    of the sulphur compounds in fossil fuels and the possibilities to remove them will be given. Then the combustion of sulphur species and their influence on the combustion chemistry and especially on the CO oxidation and the NOx formation will be described. Finally the in-situ removal of sulphur in the combustion...... process by reaction between SO2 and calcium containing sorbents and the influence on the NOx chemistry will be treated....

  14. Book Symposium: Duncan Pritchard, Epistemic Angst (Princeton University Press, 2015, xiii + 236 pages

    Directory of Open Access Journals (Sweden)

    Duncan Pritchard

    Full Text Available ABSTRACT This book symposium features three critical pieces dealing with Duncan Pritchard's book, 'Epistemic Angst'; the symposium also contains Pritchard's replies to his critics.

  15. Study on Combustion Characteristics and Propelling Projectile Motion Process of Bulk-Loaded Liquid Propellant

    Science.gov (United States)

    Xue, Xiaochun; Yu, Yonggang; Mang, Shanshan

    2017-07-01

    Data are presented showing that the problem of gas-liquid interaction instability is an important subject in the combustion and the propellant projectile motion process of a bulk-loaded liquid propellant gun (BLPG). The instabilities themselves arise from the sources, including fluid motion, to form a combustion gas cavity called Taylor cavity, fluid turbulence and breakup caused by liquid motion relative to the combustion chamber walls, and liquid surface breakup arising from a velocity mismatch on the gas-liquid interface. Typically, small disturbances that arise early in the BLPG combustion interior ballistic cycle can become amplified in the absence of burn rate limiting characteristics. Herein, significant attention has been given to developing and emphasizing the need for better combustion repeatability in the BLPG. Based on this goal, the concept of using different geometries of the combustion chamber is introduced and the concept of using a stepped-wall structure on the combustion chamber itself as a useful means of exerting boundary control on the combustion evolution to thus restrain the combustion instability has been verified experimentally in this work. Moreover, based on this background, the numerical simulation is devoted to a special combustion issue under transient high-pressure and high-temperature conditions, namely, studying the combustion mechanism in a stepped-wall combustion chamber with full monopropellant on one end that is stationary and the other end can move at high speed. The numerical results also show that the burning surface of the liquid propellant can be defined geometrically and combustion is well behaved as ignition and combustion progressivity are in a suitable range during each stage in this combustion chamber with a stepped-wall structure.

  16. Pulsating combustion - Combustion characteristics and reduction of emissions

    Energy Technology Data Exchange (ETDEWEB)

    Lindholm, Annika

    1999-11-01

    In the search for high efficiency combustion systems pulsating combustion has been identified as one of the technologies that potentially can meet the objectives of clean combustion and good fuel economy. Pulsating combustion offers low emissions of pollutants, high heat transfer and efficient combustion. Although it is an old technology, the interest in pulsating combustion has been renewed in recent years, due to its unique features. Various applications of pulsating combustion can be found, mainly as drying and heating devices, of which the latter also have had commercial success. It is, however, in the design process of a pulse combustor, difficult to predict the operating frequency, the heat release etc., due to the lack of a well founded theory of the phenomenon. Research concerning control over the combustion process is essential for developing high efficiency pulse combustors with low emissions. Natural gas fired Helmholtz type pulse combustors have been the experimental objects of this study. In order to investigate the interaction between the fluid dynamics and the chemistry in pulse combustors, laser based measuring techniques as well as other conventional measuring techniques have been used. The experimental results shows the possibilities to control the combustion characteristics of pulsating combustion. It is shown that the time scales in the large vortices created at the inlet to the combustion chamber are very important for the operation of the pulse combustor. By increasing/decreasing the time scale for the large scale mixing the timing of the heat release is changed and the operating characteristics of the pulse combustor changes. Three different means for NO{sub x} reduction in Helmholtz type pulse combustors have been investigated. These include exhaust gas recirculation, alteration of air/fuel ratio and changed inlet geometry in the combustion chamber. All used methods achieved less than 10 ppm NO{sub x} emitted (referred to stoichiometric

  17. Combustion from basics to applications

    CERN Document Server

    Lackner, Maximilian; Winter, Franz

    2013-01-01

    Combustion, the process of burning, is defined as a chemical reaction between a combustible reactant (the fuel) and an oxidizing agent (such as air) in order to produce heat and in most cases light while new chemical species (e.g., flue gas components) are formed. This book covers a gap on the market by providing a concise introduction to combustion. Most of the other books currently available are targeted towards the experienced users and contain too many details and/or contain knowledge at a fairly high level. This book provides a brief and clear overview of the combustion basics, suitable f

  18. Mathematical Modeling in Combustion Science

    CERN Document Server

    Takeno, Tadao

    1988-01-01

    An important new area of current research in combustion science is reviewed in the contributions to this volume. The complicated phenomena of combustion, such as chemical reactions, heat and mass transfer, and gaseous flows, have so far been studied predominantly by experiment and by phenomenological approaches. But asymptotic analysis and other recent developments are rapidly changing this situation. The contributions in this volume are devoted to mathematical modeling in three areas: high Mach number combustion, complex chemistry and physics, and flame modeling in small scale turbulent flow combustion.

  19. Advanced coal combustion technologies and their environmental impact

    International Nuclear Information System (INIS)

    Bozicevic, Maja; Feretic, Danilo; Tomsic, Zeljko

    1997-01-01

    Estimations of world energy reserves show that coal will remain the leading primary energy source for electricity production in the foreseeable future. In order to comply with ever stricter environmental regulations and to achieve efficient use of limited energy resources, advanced combustion technologies are being developed. The most promising are the pressurised fluidized bed combustion (PFBC) and the integrated gasification combined cycle (IGCC). By injecting sorbent in the furnace, PFBC removes more than 90 percent of SO 2 in flue gases without additional emission control device. In addition, due to lower combustion temperature, NO x emissions are around 90 percent lower than those from pulverised coal (PC) plant. IGCC plant performance is even more environmentally expectable and its high efficiency is a result of a combined cycle usage. Technical, economic and environmental characteristics of mentioned combustion technologies will be presented in this paper. Comparison of PFBC, IGCC and PC power plants economics and air impact will also be given. (Author)

  20. Numerical modeling of straw combustion in a fixed bed

    DEFF Research Database (Denmark)

    Zhou, Haosheng; Jensen, Anker; Glarborg, Peter

    2005-01-01

    . The straw combustion processes include moisture evaporation, straw pyrolysis, gas combustion, and char combustion. The model provides detailed information of the structure of the ignition flame front. Simulated gas species concentrations at the bed surface, ignition flame front rate, and bed temperature......Straw is being used as main renewable energy source in grate boilers in Denmark. For optimizing operating conditions and design parameters, a one-dimensional unsteady heterogeneous mathematical model has been developed and experiments have been carried out for straw combustion in a fixed bed...... are in good agreement with measurements at different operating conditions such as primary air-flow rate, pre-heating of the primary air, oxygen concentration, moisture content in straw, and bulk density of the straw in the fixed bed. A parametric study indicates that the effective heat conductivity, straw...

  1. Combustion Byproducts Recycling Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Ziemkiewicz, Paul; Vandivort, Tamara; Pflughoeft-Hassett, Debra; Chugh, Y Paul; Hower, James

    2008-08-31

    Each year, over 100 million tons of solid byproducts are produced by coal-burning electric utilities in the United States. Annual production of flue gas desulfurization (FGD) byproducts continues to increase as the result of more stringent sulfur emission restrictions. In addition, stricter limits on NOx emissions mandated by the 1990 Clean Air Act have resulted in utility burner/boiler modifications that frequently yield higher carbon concentrations in fly ash, which restricts the use of the ash as a cement replacement. Controlling ammonia in ash is also of concern. If newer, “clean coal” combustion and gasification technologies are adopted, their byproducts may also present a management challenge. The objective of the Combustion Byproducts Recycling Consortium (CBRC) is to develop and demonstrate technologies to address issues related to the recycling of byproducts associated with coal combustion processes. A goal of CBRC is that these technologies, by the year 2010, will lead to an overall ash utilization rate from the current 34% to 50% by such measures as increasing the current rate of FGD byproduct use and increasing in the number of uses considered “allowable” under state regulations. Another issue of interest to the CBRC would be to examine the environmental impact of both byproduct utilization and disposal. No byproduct utilization technology is likely to be adopted by industry unless it is more cost-effective than landfilling. Therefore, it is extremely important that the utility industry provide guidance to the R&D program. Government agencies and privatesector organizations that may be able to utilize these materials in the conduct of their missions should also provide input. The CBRC will serve as an effective vehicle for acquiring and maintaining guidance from these diverse organizations so that the proper balance in the R&D program is achieved.

  2. The combustion of sodium

    International Nuclear Information System (INIS)

    Newman, R.N.

    1978-01-01

    The burning rates of sodium in the form of vapour jets, droplets, sprays and unconfined and confined pools have been reviewed. Attention has been paid to assessing the value of models in the various combustion modes. Additional models have been constructed for the descriptions of laminar and turbulent vapour jets, stationary droplets, forced convection over ambient pool fires together with correlations for peak pressures in confined pool environments. Where appropriate experiments with sodium have not been conducted, the likely behaviour is predicted by comparison with the burning of other fuels, particularly in the field of large free ambient fires. Some areas where further knowledge is required are highlighted. (author)

  3. Alternate fuels; Combustibles alternos

    Energy Technology Data Exchange (ETDEWEB)

    Romero Paredes R, Hernando; Ambriz G, Juan Jose [Universidad Autonoma Metropolitana. Iztapalapa (Mexico)

    2003-07-01

    In the definition and description of alternate fuels we must center ourselves in those technological alternatives that allow to obtain compounds that differ from the traditional ones, in their forms to be obtained. In this article it is tried to give an overview of alternate fuels to the conventional derivatives of petroleum and that allow to have a clear idea on the tendencies of modern investigation and the technological developments that can be implemented in the short term. It is not pretended to include all the tendencies and developments of the present world, but those that can hit in a relatively short term, in accordance with agreed with the average life of conventional fuels. Nevertheless, most of the conversion principles are applicable to the spectrum of carbonaceous or cellulosic materials which are in nature, are cultivated or wastes of organic origin. Thus one will approach them in a successive way, the physical, chemical and biological conversions that can take place in a production process of an alternate fuel or the same direct use of the fuel such as burning the sweepings derived from the forests. [Spanish] En la definicion y descripcion de combustibles alternos nos debemos centrar en aquellas alternativas tecnologicas que permitan obtener compuestos que difieren de los tradicionales, al menos en sus formas de ser obtenidos. En este articulo se pretende dar un panorama de los combustibles alternos a los convencionales derivados del petroleo y que permita tener una idea clara sobre las tendencias de la investigacion moderna y los desarrollos tecnologicos que puedan ser implementados en el corto plazo. No se pretende abarcar todas las tendencias y desarrollos del mundo actual, sino aquellas que pueden impactar en un plazo relativamente corto, acordes con la vida media de los combustibles convencionales. Sin embargo, la mayor parte de los principios de conversion son aplicables al espectro de materiales carbonaceos o celulosicos los cuales se

  4. Fluidised bed combustion system

    International Nuclear Information System (INIS)

    McKenzie, E.C.

    1976-01-01

    Fluidized bed combustion systems that facilitates the maintenance of the depth of the bed are described. A discharge pipe projects upwardly into the bed so that bed material can flow into its upper end and escape downwardly. The end of the pipe is surrounded by an enclosure and air is discharged into the enclosure so that material will enter the pipe from within the enclosure and have been cooled in the enclosure by the air discharged into it. The walls of the enclosure may themselves be cooled

  5. Combustion and direct energy conversion inside a micro-combustor

    International Nuclear Information System (INIS)

    Lei, Yafeng; Chen, Wei; Lei, Jiang

    2016-01-01

    Highlights: • The flammability range of micro-combustor was broadened with heat recirculation. • The quenching diameter decreased with heat recirculation compared to without recirculation. • The surface areas to volume ratio was the most important parameter affecting the energy conversion efficiency. • The maximum conversion efficiency (3.15%) was achieved with 1 mm inner diameter. - Abstract: Electrical energy can be generated by employing a micro-thermophotovoltaic (TPV) cell which absorbs thermal radiation from combustion taking place in a micro-combustor. The stability of combustion in a micro-combustor is essential for operating a micro-power system using hydrogen and hydrocarbon fuels as energy source. To understand the mechanism of sustaining combustion within the quenching distance of fuel, this study proposed an annular micro combustion tube with recirculation of exhaust heat. To explore the feasibility of combustion in the micro annular tube, the parameters influencing the combustion namely, quenching diameter, and flammability were studied through numerical simulation. The results indicated that combustion could be realized in micro- combustor using heat recirculation. Following results were obtained from simulation. The quenching diameter reduced from 1.3 mm to 0.9 mm for heat recirculation at equivalence ratio of 1; the lean flammability was 2.5%–5% lower than that of without heat recirculation for quenching diameters between 2 mm and 5 mm. The overall energy conversion efficiency varied at different inner diameters. A maximum efficiency of 3.15% was achieved at an inner diameter of 1 mm. The studies indicated that heat recirculation is an effective strategy to maintain combustion and to improve combustion limits in micro-scale system.

  6. Oxygen isotopic signature of CO2 from combustion processes

    Directory of Open Access Journals (Sweden)

    W. A. Brand

    2011-02-01

    Full Text Available For a comprehensive understanding of the global carbon cycle precise knowledge of all processes is necessary. Stable isotope (13C and 18O abundances provide information for the qualification and the quantification of the diverse source and sink processes. This study focuses on the δ18O signature of CO2 from combustion processes, which are widely present both naturally (wild fires, and human induced (fossil fuel combustion, biomass burning in the carbon cycle. All these combustion processes use atmospheric oxygen, of which the isotopic signature is assumed to be constant with time throughout the whole atmosphere. The combustion is generally presumed to take place at high temperatures, thus minimizing isotopic fractionation. Therefore it is generally supposed that the 18O signature of the produced CO2 is equal to that of the atmospheric oxygen. This study, however, reveals that the situation is much more complicated and that important fractionation effects do occur. From laboratory studies fractionation effects on the order of up to 26%permil; became obvious in the derived CO2 from combustion of different kinds of material, a clear differentiation of about 7‰ was also found in car exhausts which were sampled directly under ambient atmospheric conditions. We investigated a wide range of materials (both different raw materials and similar materials with different inherent 18O signature, sample geometries (e.g. texture and surface-volume ratios and combustion circumstances. We found that the main factor influencing the specific isotopic signatures of the combustion-derived CO2 and of the concomitantly released oxygen-containing side products, is the case-specific rate of combustion. This points firmly into the direction of (diffusive transport of oxygen to the reaction zone as the cause of the isotope fractionation. The original total 18O signature of the material appeared to have little influence, however, a contribution of specific bio

  7. Pre-Combustion Carbondioxide Capture in Integrated Gasification Combined Cycles

    Directory of Open Access Journals (Sweden)

    M. Zeki YILMAZOĞLU

    2010-02-01

    Full Text Available Thermal power plants have a significant place big proportion in the production of electric energy. Thermal power plants are the systems which converts heat energy to mechanical energy and also mechanical energy to electrical energy. Heat energy is obtained from combustion process and as a result of this, some harmful emissions, like CO2, which are the reason for global warming, are released to atmosphere. The contribution of carbondioxide to global warming has been exposed by the previous researchs. Due to this fact, clean energy technologies are growing rapidly all around the world. Coal is generally used in power plants and when compared to other fossil energy sources unit electricity production cost is less than others. When reserve rate is taken into account, coal may be converted to energy in a more efficient and cleaner way. The aim for using the clean coal technologies are to eradicate the harmful emissions of coal and to store the carbondioxide, orginated from combustion, in different forms. In line with this aim, carbondioxide may be captured by either pre-combustion, by O2/CO2 recycling combustion systems or by post combustion. The integrated gasification combined cycles (IGCC are available in pre-combustion capture systems, whereas in O2/CO2 recycling combustion systems there are ultrasuper critical boiler technologies and finally flue gas washing systems by amines exists in post combustion systems. In this study, a pre-combustion CO2 capture process via oxygen blown gasifiers is compared with a conventional power plant in terms of CO2 emissions. Captured carbondioxide quantity has been presented as a result of the calculations made throughout the study.

  8. 3rd International Symposium on Innovative Management, Information and Production

    CERN Document Server

    Xu, Bing; Wu, Berlin

    2014-01-01

    Innovative Management in Information and Production is based on the proceedings of the Third International Symposium on Innovative Managemet, Information and Production. This symposium is held by International Society of Management Engineers. The symposium took place on October 8-10, in Ho Chi Minh City, Vietnam. This book examines recent innovative management of information and productions such as digital collection management and operations planning, scheduling and control.

  9. 1st Jagiellonian Symposium on Fundamental and Applied Subatomic Physics

    CERN Document Server

    2016-01-01

    Following the success of two meetings "II Symposium on applied nuclear physics and innovative technologies" and "II Symposium on Positron Emission Tomography" organized in 2014, this event will start a new series of conferences which will bring together scientists from the physics, nuclear medicine and healthcare. One of the main purposes of the symposium is to exchange experience and and expertise gained by various institutions in the field of applied and fundamental nuclear as well as particle physics, medical imaging, radiotherapy and healthcare.

  10. Proceedings of the international nuclear power plant aging symposium

    International Nuclear Information System (INIS)

    Beranek, A.

    1989-03-01

    This report presents the proceedings of the International Nuclear Power Plant Aging Symposium that was held at the Hyatt Regency Hotel in Bethesda, Maryland, on August 30-31 and September 1, 1988. The Symposium was presented in cooperation with the American Nuclear Society, the American Society of Civil Engineers, the American Society of Mechanical Engineers, and the Institute of Electrical and Electronics Engineers. There were approximately 550 participants from 16 countries at the Symposium

  11. NIFS symposium: toward the research of fusion burning plasmas

    International Nuclear Information System (INIS)

    Itoh, Sanae

    1993-07-01

    NIFS symposium, entitled 'Toward the research of Fusion Burning Plasmas - Present status and Future Strategy' was held at NIFS on July 15th 1992. This NIFS symposium covers various topics related to burning plasma, e.g., JET DT experiment, Plan for DT experiment on TFTR as well as the future trends among researchers. To study the critical issues and trends of future research, a questionnaire was sent to about 100 researchers. This report presents such activities in the NIFS symposium. (author)

  12. CONFERENCE NOTE: Sixth Symposium on Temperature Scheduled for March 1982

    Science.gov (United States)

    1981-07-01

    The call for papers for the 6th Symposium on Temperature, Its Measurement and Control in Science and Industry has been issued. The Symposium is scheduled to take place in Washington, DC, USA during the week of March 14 18, 1982. Like its predecessors held in the years 1919, 1939, 1954, 1961, and 1971, the 6th Symposium will stress advances in the measurement of thermodynamic values of temperature, in temperature reference points, in temperature sensors and instruments for the control of temperature, and in the development and use of temperature scales. For the first time, an exhibit of thermometry will be a part of the Symposium. Manuscripts to be submitted for inclusion in the Symposium should be sent to the 6th Temperature Symposium Program Chairman, National Bureau of Standards, by September 15, 1981. Those papers accepted for the Symposium will be due in camera-ready form by February 15, 1982. Original papers on all of the topics listed above, as well as reviews of the past decade's progress in thermometry and temperature control, are solicited by the Symposium organizers. The Symposium arrangements and registration are in the care of the Instrument Society of America (represented on the Symposium General Committee by Mr C T Glazer, 67 Alexander Drive, PO Box 12277, Research Triangle Park, North Carolina, 27709, USA). Questions regarding the instrument exhibits should also be addressed to the ISA. The technical program for the Symposium is the responsibility of a committee headed by Dr J F Schooley, Room B-128 Physics Building, National Bureau of Standards, Washington, DC, 20234, USA. The Symposium proceedings will be published by the American Institute of Physics.

  13. Fuel and combustion stratification study of Partially Premixed Combustion

    NARCIS (Netherlands)

    Izadi Najafabadi, M.; Dam, N.; Somers, B.; Johansson, B.

    2016-01-01

    Relatively high levels of stratification is one of the main advantages of Partially Premixed Combustion (PPC) over the Homogeneous Charge Compression Ignition (HCCI) concept. Fuel stratification smoothens heat release and improves controllability of this kind of combustion. However, the lack of a

  14. 10th Asia-Oceania Symposium on Fire Science and Technology

    CERN Document Server

    Matsuyama, Ken; Himoto, Keisuke; Nakamura, Yuji; Wakatsuki, Kaoru

    2017-01-01

    This book focuses on topics in the entire spectrum of fire safety science, targeting research in fires, explosions, combustion science, heat transfer, fluid dynamics, risk analysis, structural engineering, and other subjects. The book contributes to a gain in advanced scientific knowledge and presents or advances new ideas in all topics in fire safety science. Two decades ago, the 1st Asia-Oceania Symposium on Fire Science and Technology was held in Hefei, China. Since then, the Asia-Oceania Symposia have grown in size and quality. This book, reflecting that growth, helps readers to understand fire safety technology, design, and methodology in diverse areas including historical buildings, photovoltaic panels, batteries, and electric vehicles.

  15. Combustion Stratification for Naphtha from CI Combustion to PPC

    KAUST Repository

    Vallinayagam, R.

    2017-03-28

    This study demonstrates the combustion stratification from conventional compression ignition (CI) combustion to partially premixed combustion (PPC). Experiments are performed in an optical CI engine at a speed of 1200 rpm for diesel and naphtha (RON = 46). The motored pressure at TDC is maintained at 35 bar and fuelMEP is kept constant at 5.1 bar to account for the difference in fuel properties between naphtha and diesel. Single injection strategy is employed and the fuel is injected at a pressure of 800 bar. Photron FASTCAM SA4 that captures in-cylinder combustion at the rate of 10000 frames per second is employed. The captured high speed video is processed to study the combustion homogeneity based on an algorithm reported in previous studies. Starting from late fuel injection timings, combustion stratification is investigated by advancing the fuel injection timings. For late start of injection (SOI), a direct link between SOI and combustion phasing is noticed. At early SOI, combustion phasing depends on both intake air temperature and SOI. In order to match the combustion phasing (CA50) of diesel, the intake air temperature is increased to 90°C for naphtha. The combustion stratification from CI to PPC is also investigated for various level of dilution by displacing oxygen with nitrogen in the intake. The start of combustion (SOC) was delayed with the increase in dilution and to compensate for this, the intake air temperature is increased. The mixture homogeneity is enhanced for higher dilution due to longer ignition delay. The results show that high speed image is initially blue and then turned yellow, indicating soot formation and oxidation. The luminosity of combustion images decreases with early SOI and increased dilution. The images are processed to generate the level of stratification based on the image intensity. The level of stratification is same for diesel and naphtha at various SOI. When O concentration in the intake is decreased to 17.7% and 14

  16. Proceedings of the seventh symposium on laser spectroscopy

    International Nuclear Information System (INIS)

    1999-01-01

    This proceedings contains articles of the 7th symposium on laser spectroscopy and this symposium is held on Nov. 5-6, 1999 by KAERI. Both the laser and laser beams are critically used in many most precise measurements in science and technology. We discussed about the recently developed subjects in detail during the this symposium. This proceedings is composed of two major parts. One is the invitational lectures and the other is the research papers. And we have a number of invited speakers from several advanced countries. Their talks are the highlights of this symposium. (Cho, G. S.)

  17. Proceedings of the eighth symposium on laser spectroscopy

    International Nuclear Information System (INIS)

    2000-01-01

    This proceedings contains articles of the 8th symposium on laser spectroscopy and this symposium is held on Nov. 3-4, 2000 by KAERI. Both the laser and laser beams are critically used in many most precise measurements in science and technology. We discussed about the recently developed subjects in detail during the this symposium. This proceedings is composed of two major parts. One is the invitational lectures and the other is the research papers. And we have a number of invited speakers from several advanced countries. Their talks are the highlights of this symposium. (Yi, J. H.)

  18. Some Factors Affecting Combustion in an Internal-Combustion Engine

    Science.gov (United States)

    Rothrock, A M; Cohn, Mildred

    1936-01-01

    An investigation of the combustion of gasoline, safety, and diesel fuels was made in the NACA combustion apparatus under conditions of temperature that permitted ignition by spark with direct fuel injection, in spite of the compression ratio of 12.7 employed. The influence of such variables as injection advance angle, jacket temperature, engine speed, and spark position was studied. The most pronounced effect was that an increase in the injection advance angle (beyond a certain minimum value) caused a decrease in the extent and rate of combustion. In almost all cases combustion improved with increased temperature. The results show that at low air temperatures the rates of combustion vary with the volatility of the fuel, but that at high temperatures this relationship does not exist and the rates depend to a greater extent on the chemical nature of the fuel.

  19. Preliminary assessment of combustion modes for internal combustion wave rotors

    Science.gov (United States)

    Nalim, M. Razi

    1995-01-01

    Combustion within the channels of a wave rotor is examined as a means of obtaining pressure gain during heat addition in a gas turbine engine. Several modes of combustion are considered and the factors that determine the applicability of three modes are evaluated in detail; premixed autoignition/detonation, premixed deflagration, and non-premixed compression ignition. The last two will require strong turbulence for completion of combustion in a reasonable time in the wave rotor. The compression/autoignition modes will require inlet temperatures in excess of 1500 R for reliable ignition with most hydrocarbon fuels; otherwise, a supplementary ignition method must be provided. Examples of combustion mode selection are presented for two core engine applications that had been previously designed with equivalent 4-port wave rotor topping cycles using external combustion.

  20. Tenth international symposium on environmental biogeochemistry. Final technical report, December 15, 1990--December 14, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Ehrlich, H.L.

    1992-01-01

    The primary task of this Symposium on Environmental Biogeochemistry was to examine our current understanding of GLOBAL CHANGE AND THE BIOGEOCHEMISTRY OF RADIATIVE TRACE GASES. The symposium was divided into 12 non-overlapping sessions: Paleoatmospheres and paleoclimates; Global distributions and atmospheric reactions; Poster presentations on the topics of sessions 1, 2, 4, 5, and 7; Terrestrial systems and land use change - 1; Terrestrial and land use change - 11; Fluxes and cycling in aquatic systems; Metals, organics, and depositional environments; Poster presentations on the topics of sessions 6, 9, 10 and 12; Biological Mechanisms of formation and destruction - 1; Biological mechanisms of formation and destruction - 11; High latitude systems; and Global sources, sinks, and feedbacks.