Stabilizing Stick-Slip Friction

International Nuclear Information System (INIS)

Capozza, Rosario; Barel, Itay; Urbakh, Michael; Rubinstein, Shmuel M.; Fineberg, Jay

2011-01-01

Even the most regular stick-slip frictional sliding is always stochastic, with irregularity in both the intervals between slip events and the sizes of the associated stress drops. Applying small-amplitude oscillations to the shear force, we show, experimentally and theoretically, that the stick-slip periods synchronize. We further show that this phase locking is related to the inhibition of slow rupture modes which forces a transition to fast rupture, providing a possible mechanism for observed remote triggering of earthquakes. Such manipulation of collective modes may be generally relevant to extended nonlinear systems driven near to criticality.

Phytoplankton aggregate formation: observations of patterns and mechanisms of cell sticking and the significance of exopolymeric material

DEFF Research Database (Denmark)

Kiørboe, Thomas; Hansen, Jorgen L. S.

1993-01-01

are sticky in themselves, and coagulation depends on cell-cell sticking and does not involve mucus. Aggregates are composed solely of cells. Cells of the diatom Chaetoceros affinis, on the other hand, are not in themselves sticky. Transparent exopolymeric particles (TEP), produced by the diatom, cause...... the cells to aggregate and coagulation depends on TEP-cell rather than cell-cell sticking. Aggregates are formed of a mixture of mucus and cells. We found several species of diatoms and one flagellate species to produce copious amounts of TEP. TEP from some species (e.g. Coscinodiscus sp.) is sticky and may...

Preparation of graphene by electrical explosion of graphite sticks.

Science.gov (United States)

Gao, Xin; Xu, Chunxiao; Yin, Hao; Wang, Xiaoguang; Song, Qiuzhi; Chen, Pengwan

2017-08-03

Graphene nanosheets were produced by electrical explosion of high-purity graphite sticks in distilled water at room temperature. The as-prepared samples were characterized by various techniques to find different forms of carbon phases, including graphite nanosheets, few-layer graphene, and especially, mono-layer graphene with good crystallinity. Delicate control of energy injection is critical for graphene nanosheet formation, whereas mono-layer graphene was produced under the charging voltage of 22.5-23.5 kV. On the basis of electrical wire explosion and our experimental results, the underlying mechanism that governs the graphene generation was carefully illustrated. This work provides a simple but innovative route for producing graphene nanosheets.

Found a USB stick? Go and infect your PC!

CERN Document Server

Computer Security Team

2012-01-01

Err. Wait. Please no! USB sticks are not innocent little things. They can quickly mutate into malicious nasty beasts! Just in the recent past, at least two physics experiments were suffering as their control and data acquisition PCs, respectively, were infected by USB sticks holding malicious code. A bit longer ago, a series of laptops were infected at a 2008 computing conference as an infected USB stick made its tour around. Bad luck for those who ran a Windows operating system and inserted that stick…   So, you found a USB stick in the cafeteria? Take care. If this were a lollipop, you wouldn’t just pick it up and lick it, would you? So beware of USB sticks whose origin or previous usage you don’t know. They might infect your PC once plugged in. In order to be on the safe side, accept and share only USB sticks whose owner you trust. Run up-to-date anti-virus software on your PC, make sure that its operating system is patched...

Sticking in muon catalyzed D-T fusion

International Nuclear Information System (INIS)

Petitjean, C.; Sherman, R.H.; Bossy, H.; Daniel, H.; Hartmann, F.J.; Neumann, W.; Schmidt, G.; Egidy, T. von

1986-10-01

The issue of μα sticking after muon catalyzed DT fusion is controversial, since a number of theoretical and experimental results came out recently with sticking values ω s varying over a large range. After a review of this situation, our measurements at SIN and methods of sticking analysis from neutron time structures are presented in detail. The important point is the correct understanding of the experimentally observed time distributions. At high density (liquid DT) we find, after correction for other fusion channels, for DT sticking ω s (0.45 +- 0.05)%, not dependent on tritium concentration c t and in accordance with our X-ray observations. At low density (DT gas, φ 3% - 8%) our preliminary result is 0.50 +- 0.10%, giving a ratio 1.1 +- 0.2 in agreement with conventional theories, but strongly disagreeing with the LAMPF experiment of S.E. Jones et al. Our result sets the maximum fusion output per muon to less than 220 +- 20. (author)

The Existence of a Sticking Region in Free Weight Squats

Directory of Open Access Journals (Sweden)

Tillaar Roland van den

2014-10-01

Full Text Available The aim of this study was to investigate the existence of the sticking region in two legged free weight squats. Fifteen resistance-training males (age 24 ± 4 years, body mass 82 ± 11 kg, body height 179 ± 6 cm with 6 ± 3 years of resistance-training experience performed 6-RM in free weight squats. The last repetition was analyzed for the existence of a sticking region. Only in 10 out of 15 participants a sticking region was observed. The observed sticking region was much shorter than in the bench press. Furthermore, rectus femoris decreased the EMG activity in contrast to increased EMG activity in biceps femoris around the sticking and surrounding region. No significant change in EMG activity was found for the lateral and medial vastus muscles. It is suggested that a combination of these muscle activity changes could be one of the causes of the existence of the sticking region in free weight squats

The existence of a sticking region in free weight squats.

Science.gov (United States)

van den Tillaar, Roland; Andersen, Vidar; Saeterbakken, Atle Hole

2014-09-29

The aim of this study was to investigate the existence of the sticking region in two legged free weight squats. Fifteen resistance-training males (age 24 ± 4 years, body mass 82 ± 11 kg, body height 179 ± 6 cm) with 6 ± 3 years of resistance-training experience performed 6-RM in free weight squats. The last repetition was analyzed for the existence of a sticking region. Only in 10 out of 15 participants a sticking region was observed. The observed sticking region was much shorter than in the bench press. Furthermore, rectus femoris decreased the EMG activity in contrast to increased EMG activity in biceps femoris around the sticking and surrounding region. No significant change in EMG activity was found for the lateral and medial vastus muscles. It is suggested that a combination of these muscle activity changes could be one of the causes of the existence of the sticking region in free weight squats.

Learning control of a flight simulator stick

NARCIS (Netherlands)

Velthuis, W.J.R.; de Vries, Theodorus J.A.; Vrielink, Koen H.J.; Wierda, G.J.; Borghuis, André

1998-01-01

Aimportant part of a flight simulator is its control loading system, which is the part that emulates the behaviour of an aircraft as experienced by the pilot through the stick. Such a system consists of a model of the aircraft that is to be simulated and a stick that is driven by an electric motor.

Stick-slip substructure in rapid tape peeling

KAUST Repository

Thoroddsen, Sigurdur T.

2010-10-15

The peeling of adhesive tape is known to proceed with a stick-slip mechanism and produces a characteristic ripping sound. The peeling also produces light and when peeled in a vacuum, even X-rays have been observed, whose emissions are correlated with the slip events. Here we present direct imaging of the detachment zone when Scotch tape is peeled off at high speed from a solid surface, revealing a highly regular substructure, during the slip phase. The typical 4-mm-long slip region has a regular substructure of transverse 220 μm wide slip bands, which fracture sideways at speeds over 300 m/s. The fracture tip emits waves into the detached section of the tape at ∼100 m/s, which promotes the sound, so characteristic of this phenomenon.

Stick-slip substructure in rapid tape peeling

KAUST Repository

Thoroddsen, Sigurdur T; Nguyen, H. D.; Takehara, K.; Etoh, T. G.

2010-01-01

The peeling of adhesive tape is known to proceed with a stick-slip mechanism and produces a characteristic ripping sound. The peeling also produces light and when peeled in a vacuum, even X-rays have been observed, whose emissions are correlated with the slip events. Here we present direct imaging of the detachment zone when Scotch tape is peeled off at high speed from a solid surface, revealing a highly regular substructure, during the slip phase. The typical 4-mm-long slip region has a regular substructure of transverse 220 μm wide slip bands, which fracture sideways at speeds over 300 m/s. The fracture tip emits waves into the detached section of the tape at ∼100 m/s, which promotes the sound, so characteristic of this phenomenon.

Powder properties and compaction parameters that influence punch sticking propensity of pharmaceuticals.

Science.gov (United States)

Paul, Shubhajit; Taylor, Lisa J; Murphy, Brendan; Krzyzaniak, Joseph F; Dawson, Neil; Mullarney, Matthew P; Meenan, Paul; Sun, Changquan Calvin

2017-04-15

Punch sticking is a frequently occurring problem that challenges successful tablet manufacturing. A mechanistic understanding of the punch sticking phenomenon facilitates the design of effective strategies to solve punch sticking problems of a drug. The first step in this effort is to identify process parameters and particle properties that can profoundly affect sticking performance. This work was aimed at elucidating the key material properties and compaction parameters that influence punch sticking by statistically analyzing punch sticking data of 24 chemically diverse compounds obtained using a set of tooling with removable upper punch tip. Partial least square (PLS) analysis of the data revealed that particle surface area and tablet tensile strength are the most significant factors attributed to punch sticking. Die-wall pressure, ejection force, and take-off force also correlate with sticking, but to a lesser extent. Copyright © 2017 Elsevier B.V. All rights reserved.

Science 101: Why Don't Spiders Stick to Their Own Webs?

Science.gov (United States)

Robertson, Bill

2011-01-01

This article explains why spiders don't stick to their webs. Spiders don't get stuck in their own webs (and they aren't immune to their own glue) because they use a combination of sticky and nonsticky threads (different glands for producing those), and the glue is in droplets that the spider can avoid but the prey can't. The spider's nervous…

D'Nealian Handwriting versus Circle-Stick Print.

Science.gov (United States)

Thurber, Donald N.

This paper argues against teaching children to make letters using circle-stick writing. It contends that the circle-stick method requires continued pen/pencil lifts hindering rhythm or flow in the writing process and that there is little carry-over value into cursive writing as the two scripts are totally different. D'Nealian print, one type of…

Dissuasive cigarette sticks: the next step in standardised ('plain') packaging?

Science.gov (United States)

Hoek, Janet; Gendall, Philip; Eckert, Christine; Louviere, Jordan

2016-11-01

Standardised (or 'plain') packaging has reduced the appeal of smoking by removing imagery that smokers use to affiliate themselves with the brand they smoke. We examined whether changing the appearance of cigarette sticks could further denormalise smoking and enhance the negative impact of standardised packaging. We conducted an online study of 313 New Zealand smokers who comprised a Best-Worst Choice experiment and a rating task. The Best-Worst experiment used a 2×3×3×6 orthogonal design to test the following attributes: on-pack warning message, branding level, warning size and stick appearance. We identified three segments whose members' choice patterns were strongly influenced by the stick design, warning theme and size, and warning theme, respectively. Each of the dissuasive sticks tested was less preferred and rated as less appealing than the most common stick in use; a 'minutes of life lost' stick was the most aversive of the stimuli tested. Dissuasive sticks could enhance the effect of standardised packaging, particularly among older smokers who are often more heavily addicted and resistant to change. Countries introducing standardised packaging legislation should take the opportunity to denormalise the appearance of cigarette sticks, in addition to removing external tobacco branding from packs and increasing the warning size. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Experiments on vibration-driven stick-slip locomotion: A sliding bifurcation perspective

Science.gov (United States)

Du, Zhouwei; Fang, Hongbin; Zhan, Xiong; Xu, Jian

2018-05-01

Dry friction appears at the contact interface between two surfaces and is the source of stick-slip vibrations. Instead of being a negative factor, dry friction is essential for vibration-driven locomotion system to take effect. However, the dry-friction-induced stick-slip locomotion has not been fully understood in previous research, especially in terms of experiments. In this paper, we experimentally study the stick-slip dynamics of a vibration-driven locomotion system from a sliding bifurcation perspective. To this end, we first design and build a vibration-driven locomotion prototype based on an internal piezoelectric cantilever. By utilizing the mechanical resonance, the small piezoelectric deformation is significantly amplified to drive the prototype to achieve effective locomotion. Through identifying the stick-slip characteristics in velocity histories, we could categorize the system's locomotion into four types and obtain a stick-slip categorization diagram. In each zone of the diagram the locomotion exhibits qualitatively different stick-slip dynamics. Such categorization diagram is actually a sliding bifurcation diagram; crossing from one stick-slip zone to another corresponds to the triggering of a sliding bifurcation. In addition, a simplified single degree-of-freedom model is established, with the rationality of simplification been explained theoretically and numerically. Based on the equivalent model, a numerical stick-slip categorization is also obtained, which shows good agreement with the experiments both qualitatively and quantitatively. To the best of our knowledge, this is the first work that experimentally generates a sliding bifurcation diagram. The obtained stick-slip categorizations deepen our understanding of stick-slip dynamics in vibration-driven systems and could serve as a base for system design and optimization.

PENGEMBANGAN MODEL ALAT STICK HOCKEY UNTUK LATIHAN PEMAIN PEMULA HOCKEY

Directory of Open Access Journals (Sweden)

In’am Attaqi

2016-10-01

Full Text Available Background issues that hamper the development of hockey in Central Java due to the lack of means of stick that is expensive and so difficult to get it. The focus of this research problem is to design products hockey stick model development tool for training novice players and test products hockey stick model development tool for training novice players.The approach used in this research is the Research and Development. Phase of the study include preliminary research, design modeling, model development testing procedures, expert Judgment, small-scale trials, trials broad scale. The subject of this study is Mts Miftahussalam 1 Wonosalam Demak. Hockey expert of experts and specialists timber expert. The data analysis phase of field work and data analysis stage include observation, observation, interviews, documentation and effectiveness testing of products, expert judgment hockey expert of experts and specialists timber expert.The results of this study are the product hockey stick for beginner hockey players training in Mts Miftahussalam 1 Wonosalam.PANDAWA hockey stick product can be used as a means of practicing basic techniques for beginner hockey players, hockey stick PANDAWA product can be used as a training tool in improving the ability of the basic techniques of playing hockey, hockey stick PANDAWA product can be used as a means of playing hockey for the novice player.

Fatigue effects upon sticking region and electromyography in a six-repetition maximum bench press.

Science.gov (United States)

van den Tillaar, Roland; Saeterbakken, Atle Hole

2013-01-01

The aim of the study was to examine the sticking region and concomitant neuromuscular activation of the prime movers during six-repetition maximum (RM) bench pressing. We hypothesised that both peak velocities would decrease and that the electromyography (EMG) of the prime movers (deltoid, major pectoralis and triceps) would increase during the pre-sticking and sticking region during the six repetitions due to fatigue. Thirteen resistance-trained males (age 22.8 ± 2.2 years, stature 1.82 ± 0.06 m, body mass 83.4 ± 7.6 kg) performed 6-RM bench presses. Barbell kinematics and EMG activity of pectoralis major, deltoid anterior, and triceps brachii during the pre-, sticking and post-sticking region of each repetition in a 6-RM bench press were analysed. For both the sticking as the post-sticking region, the time increased significantly from the first to the sixth repetition. Vertical barbell height at the start of sticking region was lower, while the height at the end of the sticking region and post-sticking region did not change during the six repetitions. It was concluded that in 6-RM bench pressing performance, the sticking region is a poor mechanical force region due to the unchanged barbell height at the end of the sticking region. Furthermore, when fatigue occurs, the pectoralis and the deltoid muscles are responsible for surpassing the sticking region as indicated by their increased activity during the pre- and sticking region during the six-repetitions bench press.

Ice Cream Stick Math.

Science.gov (United States)

Paddock, Cynthia

1992-01-01

Described is a teaching technique which uses the collection of ice cream sticks as a means of increasing awareness of quantity in a self-contained elementary special class for students with learning disabilities and mild mental retardation. (DB)

Some remarks on sticking fraction calculations in muon-catalyzed deuterium-tritium fusion

International Nuclear Information System (INIS)

Biedenharn, L.C.; Ciftci, A.K.

1992-01-01

The sticking coefficient in muon catalyzed dt fusion is an important parameter affecting feasibility for practical applications. This paper discusses a procedure, developed for an accurate calculation of this parameter, and show that a well-defined limit produces precisely the often-criticized heuristic sudden approximation. Why this should be is discussed in some detail from a very different, possibly surprising, point of view

Existence of Stick-Slip Periodic Solutions in a Dry Friction Oscillator

International Nuclear Information System (INIS)

Li Qun-Hong; Chen Yu-Ming; Qin Zhi-Ying

2011-01-01

The stick-slip behavior in friction oscillators is very complicated due to the non-smoothness of the dry friction, which is the basic form of motion of dynamical systems with friction. In this paper, the stick-slip periodic solution in a single-degree-of-freedom oscillator with dry friction is investigated in detail. Under the assumption of kinetic friction being the Coulomb friction, the existence of the stick-slip periodic solution is considered to give out an analytic criterion in a class of friction systems. A two-parameter unfolding diagram is also described. Moreover, the time and states of motion on the boundary of the stick and slip motions are semi-analytically obtained in a single stick-slip period. (general)

The effects of grip width on sticking region in bench press.

Science.gov (United States)

Gomo, Olav; Van Den Tillaar, Roland

2016-01-01

The aim of this study was to examine the occurrence of the sticking region by examining how three different grip widths affect the sticking region in powerlifters' bench press performance. It was hypothesised that the sticking region would occur at the same joint angle of the elbow and shoulder independent of grip width, indicating a poor mechanical region for vertical force production at these joint angles. Twelve male experienced powerlifters (age 27.7 ± 8.8 years, mass 91.9 ± 15.4 kg) were tested in one repetition maximum (1-RM) bench press with a narrow, medium and wide grip. Joint kinematics, timing, bar position and velocity were measured with a 3D motion capture system. All participants showed a clear sticking region with all three grip widths, but this sticking region was not found to occur at the same joint angles in all three grip widths, thereby rejecting the hypothesis that the sticking region would occur at the same joint angle of the elbow and shoulder independent of grip width. It is suggested that, due to the differences in moment arm of the barbell about the elbow joint in the sticking region, there still might be a poor mechanical region for total force production that is joint angle-specific.

The efficacy of mechanical vibration analgesia for relief of heel stick pain in neonates: a novel approach.

Science.gov (United States)

Baba, Lisa R; McGrath, Jacqueline M; Liu, Jiexin

2010-01-01

Hospitalized infants are often exposed to many painful procedures as a result of their illness or disease process. Untreated or poorly treated pain can have deleterious effects on normal nociceptive pain development as well as future development of pain pathways. Mechanical vibration has been found to be efficacious in adult and pediatric populations for the relief of mild-to-moderate acute and chronic pain. However, little is known about the efficacy of this intervention in the neonatal population. The purpose of this study was to test the hypothesis that mechanical vibration would be efficacious in the relief of pain associated with heel sticks in neonates. Heel sticks are one of the most common painful procedures during neonatal hospitalization. A random-sequencing crossover design was used with infants acting as their own controls. Newborn infants of 35 weeks' gestation or greater (N = 20) met the inclusion criteria for the study. Pain during heel stick was measured with the Neonatal Infant Pain Scale. The Neonatal Infant Pain Scale is a nonintrusive tool with extensive evidence of its reliability and validity in the neonatal population, when used by trained observers. Mechanical vibration produced an analgesic effect for infants who had previously experienced painful heel sticks that approached statistical significance. The apparent limitations of mechanical vibration as analgesia may be due to the concurrent use of sucrose and pacifier, the effects of order (ie, habituation), or type II error. Because vibration produced the predicted positive effect in some circumstances, further investigation in larger samples within a randomized clinical trial is warranted.

Stick-slip and Torsional Friction Factors in Inclined Wellbores

Directory of Open Access Journals (Sweden)

Aarsnes Ulf Jakob F.

2018-01-01

The model is shown to have a good match with the surface and downhole behavior of two deviated wellbores for depths ranging from 1500 to 3000 meters. In particular, the model replicates the amplitude and period of the oscillations, in both the topside torque and the downhole RPM, as caused by the along-string stick slip. It is further shown that by using the surface behavior of the drill-string during rotational startup, an estimate of the static and dynamic friction factors along the wellbore can be obtained, even during stick-slip oscillations, if axial tension in the drillstring is considered. This presents a possible method to estimate friction factors in the field when off-bottom stick slip is encountered, and points in the direction of avoiding stick slip through the design of an appropriate torsional start-up procedure without the need of an explicit friction test.

Quantum dynamics of hydrogen atoms on graphene. II. Sticking

Energy Technology Data Exchange (ETDEWEB)

Bonfanti, Matteo, E-mail: matteo.bonfanti@unimi.it [Dipartimento di Chimica, Università degli Studi di Milano, v. Golgi 19, 20133 Milano (Italy); Jackson, Bret [Department of Chemistry, University of Massachusetts, Amherst, Massachusetts 01003 (United States); Hughes, Keith H. [School of Chemistry, Bangor University, Bangor, Gwynedd LL57 2UW (United Kingdom); Burghardt, Irene [Institute of Physical and Theoretical Chemistry, Goethe University Frankfurt, Max-von-Laue-Str. 7, 60438 Frankfurt/Main (Germany); Martinazzo, Rocco, E-mail: rocco.martinazzo@unimi.it [Dipartimento di Chimica, Università degli Studi di Milano, v. Golgi 19, 20133 Milano (Italy); Istituto di Scienze e Tecnologie Molecolari, Consiglio Nazionale delle Richerche, v. Golgi 19, 20133 Milano (Italy)

2015-09-28

Following our recent system-bath modeling of the interaction between a hydrogen atom and a graphene surface [Bonfanti et al., J. Chem. Phys. 143, 124703 (2015)], we present the results of converged quantum scattering calculations on the activated sticking dynamics. The focus of this study is the collinear scattering on a surface at zero temperature, which is treated with high-dimensional wavepacket propagations with the multi-configuration time-dependent Hartree method. At low collision energies, barrier-crossing dominates the sticking and any projectile that overcomes the barrier gets trapped in the chemisorption well. However, at high collision energies, energy transfer to the surface is a limiting factor, and fast H atoms hardly dissipate their excess energy and stick on the surface. As a consequence, the sticking coefficient is maximum (∼0.65) at an energy which is about one and half larger than the barrier height. Comparison of the results with classical and quasi-classical calculations shows that quantum fluctuations of the lattice play a primary role in the dynamics. A simple impulsive model describing the collision of a classical projectile with a quantum surface is developed which reproduces the quantum results remarkably well for all but the lowest energies, thereby capturing the essential physics of the activated sticking dynamics investigated.

Quantum dynamics of hydrogen atoms on graphene. II. Sticking

Science.gov (United States)

Bonfanti, Matteo; Jackson, Bret; Hughes, Keith H.; Burghardt, Irene; Martinazzo, Rocco

2015-09-01

Following our recent system-bath modeling of the interaction between a hydrogen atom and a graphene surface [Bonfanti et al., J. Chem. Phys. 143, 124703 (2015)], we present the results of converged quantum scattering calculations on the activated sticking dynamics. The focus of this study is the collinear scattering on a surface at zero temperature, which is treated with high-dimensional wavepacket propagations with the multi-configuration time-dependent Hartree method. At low collision energies, barrier-crossing dominates the sticking and any projectile that overcomes the barrier gets trapped in the chemisorption well. However, at high collision energies, energy transfer to the surface is a limiting factor, and fast H atoms hardly dissipate their excess energy and stick on the surface. As a consequence, the sticking coefficient is maximum (˜0.65) at an energy which is about one and half larger than the barrier height. Comparison of the results with classical and quasi-classical calculations shows that quantum fluctuations of the lattice play a primary role in the dynamics. A simple impulsive model describing the collision of a classical projectile with a quantum surface is developed which reproduces the quantum results remarkably well for all but the lowest energies, thereby capturing the essential physics of the activated sticking dynamics investigated.

Quantum dynamics of hydrogen atoms on graphene. II. Sticking.

Science.gov (United States)

Bonfanti, Matteo; Jackson, Bret; Hughes, Keith H; Burghardt, Irene; Martinazzo, Rocco

2015-09-28

Following our recent system-bath modeling of the interaction between a hydrogen atom and a graphene surface [Bonfanti et al., J. Chem. Phys. 143, 124703 (2015)], we present the results of converged quantum scattering calculations on the activated sticking dynamics. The focus of this study is the collinear scattering on a surface at zero temperature, which is treated with high-dimensional wavepacket propagations with the multi-configuration time-dependent Hartree method. At low collision energies, barrier-crossing dominates the sticking and any projectile that overcomes the barrier gets trapped in the chemisorption well. However, at high collision energies, energy transfer to the surface is a limiting factor, and fast H atoms hardly dissipate their excess energy and stick on the surface. As a consequence, the sticking coefficient is maximum (∼0.65) at an energy which is about one and half larger than the barrier height. Comparison of the results with classical and quasi-classical calculations shows that quantum fluctuations of the lattice play a primary role in the dynamics. A simple impulsive model describing the collision of a classical projectile with a quantum surface is developed which reproduces the quantum results remarkably well for all but the lowest energies, thereby capturing the essential physics of the activated sticking dynamics investigated.

Quantum dynamics of hydrogen atoms on graphene. II. Sticking

International Nuclear Information System (INIS)

Bonfanti, Matteo; Jackson, Bret; Hughes, Keith H.; Burghardt, Irene; Martinazzo, Rocco

2015-01-01

Following our recent system-bath modeling of the interaction between a hydrogen atom and a graphene surface [Bonfanti et al., J. Chem. Phys. 143, 124703 (2015)], we present the results of converged quantum scattering calculations on the activated sticking dynamics. The focus of this study is the collinear scattering on a surface at zero temperature, which is treated with high-dimensional wavepacket propagations with the multi-configuration time-dependent Hartree method. At low collision energies, barrier-crossing dominates the sticking and any projectile that overcomes the barrier gets trapped in the chemisorption well. However, at high collision energies, energy transfer to the surface is a limiting factor, and fast H atoms hardly dissipate their excess energy and stick on the surface. As a consequence, the sticking coefficient is maximum (∼0.65) at an energy which is about one and half larger than the barrier height. Comparison of the results with classical and quasi-classical calculations shows that quantum fluctuations of the lattice play a primary role in the dynamics. A simple impulsive model describing the collision of a classical projectile with a quantum surface is developed which reproduces the quantum results remarkably well for all but the lowest energies, thereby capturing the essential physics of the activated sticking dynamics investigated

More Popsicle-Stick Multiplication.

Science.gov (United States)

Dunkels, Andrejs

1982-01-01

A way to use tongue depressors in a model of multiplication is presented. The original intent was to use the sticks to teach about fractions, but "mistakes" in student responses led to new ideas. It is felt that teachers should use the model in teaching multiplication. (MP)

Prevalence of Needle Stick Injuries among Healthcare Workers in ...

African Journals Online (AJOL)

Background: Needle stick injuries represent one of the most important occupational hazards to which health workers are exposed. These injuries result from accidental piercing of the skin and or mucous membranes by sharp objects. Needle stick injuries carry the risk of exposure to blood-borne pathogens, especially ...

Evaluating non-stick properties of different surface materials for contact frying

DEFF Research Database (Denmark)

Ashokkumar, Saranya; Adler-Nissen, Jens

2011-01-01

to evaluate non-stick and cleaning properties of the coatings. In accordance with industry standards pancake was selected as the food model for the non-stick properties. The performance of different frying surfaces (stainless steel, aluminium, PTFE (polytetrafluoroethylene) and three ceramic coatings with two...... on their non-stick properties, so that the smoother surfaces gave a higher force of adhesion between pancake and surface....

21 CFR 102.45 - Fish sticks or portions made from minced fish.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Fish sticks or portions made from minced fish. 102... for Specific Nonstandardized Foods § 102.45 Fish sticks or portions made from minced fish. (a) The common or usual name of the food product that resembles and is of the same composition as fish sticks or...

Sticking it to Instruction

OpenAIRE

Ellie Collier

2008-01-01

Made to Stick: Why Some Ideas Survive and Others Die by Chip Heath & Dan Heath I always feel the need to preface my praise for this book with a little background. I’ve read a slew of best sellers on behavior. I started when a friend was raving about Malcolm Gladwell. I picked up Blink [...

Sampling problems for randomly broken sticks

Energy Technology Data Exchange (ETDEWEB)

Huillet, Thierry [Laboratoire de Physique Theorique et Modelisation, CNRS-UMR 8089 et Universite de Cergy-Pontoise, 5 mail Gay-Lussac, 95031, Neuville sur Oise (France)

2003-04-11

Consider the random partitioning model of a population (represented by a stick of length 1) into n species (fragments) with identically distributed random weights (sizes). Upon ranking the fragments' weights according to ascending sizes, let S{sub m:n} be the size of the mth smallest fragment. Assume that some observer is sampling such populations as follows: drop at random k points (the sample size) onto this stick and record the corresponding numbers of visited fragments. We shall investigate the following sampling problems: (1) what is the sample size if the sampling is carried out until the first visit of the smallest fragment (size S{sub 1:n})? (2) For a given sample size, have all the fragments of the stick been visited at least once or not? This question is related to Feller's random coupon collector problem. (3) In what order are new fragments being discovered and what is the random number of samples separating the discovery of consecutive new fragments until exhaustion of the list? For this problem, the distribution of the size-biased permutation of the species' weights, as the sequence of their weights in their order of appearance is needed and studied.

The Role of Lipsticks and Blush Sticks in Genetic Profiling for Human Identification

OpenAIRE

Nouman Rasool; Ahmad Farooq

2016-01-01

The core objectives of the current study are to generate human DNA profiles from used lipsticks and blush sticks of various brands available in Pakistan. A total of 12 international and local brands of lipsticks and blush sticks were selected. The lipsticks and blush sticks were applied by twenty different healthy female volunteers of 21-30 years of age. The heads of used lipsticks and blush sticks were swabbed with dry sterile cotton swabs. The qualitative and quantitative analysis was done ...

Sticking it to Instruction

Directory of Open Access Journals (Sweden)

Ellie Collier

2008-11-01

Full Text Available Made to Stick: Why Some Ideas Survive and Others Die by Chip Heath & Dan Heath I always feel the need to preface my praise for this book with a little background. I’ve read a slew of best sellers on behavior. I started when a friend was raving about Malcolm Gladwell. I picked up Blink [...

The physics of a popsicle stick bomb

Science.gov (United States)

Sautel, Jérémy; Bourges, Andréane; Caussarieu, Aude; Plihon, Nicolas; Taberlet, Nicolas

2017-10-01

Popsicle sticks can be interlocked in the so-called "cobra weave" to form a chain under tension. When one end of the chain is released, the sticks rapidly disentangle, forming a traveling wave that propagates down the chain. In this paper, the properties of the traveling front are studied experimentally, and classical results from the theory of elasticity allow for a dimensional analysis of the height and speed of the traveling wave. The study presented here can help undergraduate students familiarize themselves with experimental techniques of image processing, and it also demonstrates the power of dimensional analysis and scaling laws.

Development of Stick and Ball Sports on Gateball

Directory of Open Access Journals (Sweden)

Indriyanti

2017-10-01

Full Text Available The purpose of this research is to make product design development of stick and ball sports in gateball. The approach used in this study is a method of Research and Development. The subject of this research is the Central Java on gateball club event gateball in Semarang and Yogyakarta. Experts and expert expert gateball expert in mechanical engineering. The data analysis phase the work field, and the data analysis stage include observation, observation, interviews, and documentation of the test kefektifan products, expert judgment expert expert gateball and expert mechanical engineering expert. The results of this research are stick and ball exercise for beginner players gateball gateball. The result of the validator 3 expert expert from the expert gateball and expert mechanical engineering product validation data beginning the first phase obtained a score above 73 definitions of the criteria of “good”, on the second stage of the product validation data obtained a score above the 81 criteria for “excellent”. The results of the interviews to the development of gateball players 19 stick and ball gateball can not be used to play in a match and can be used for subsequent exercises but for beginners a product development tool model stick and ball gateball “ INC. “can be used to enhance the ability of basic techniques in motion game for players, gateball.

Electrical Potentials Observed During Frictional Stick-Slip - A Semiconductor Mechanism

Science.gov (United States)

Leeman, J.; Scuderi, M.; Marone, C.; Saffer, D. M.

2013-12-01

coincide with stick-slip failure. This behavior is consistent at both 1 and 30 μm/s loading velocity. At a load point velocity of 100μm/s, the anomalies exhibit sharp potential spikes on the order of 20 volts coincident with stick slip failure events with gradual charging between events. Experiments conducted under 100% humidity and submerged conditions showed no associated electrical anomalies. We interpret that the observed signal is a convolution of two effects: charging of the forcing blocks and anomalies associated with the stress state of the material. Charging of the blocks is accomplished by grain movement along the boundaries during initial arrangement of force chain networks. Anomalies associated with the material originate from electron holes produced when peroxy links are broken. The defects then propagate away from stressed regions during loading, separating charge. A return current results in a potential drop as a semi-homogeneous stress state is attained after failure of the force chain network. Electrical anomalies during material failure could potentially be used to remotely monitor stress states and cracking during the inter-seismic stage of the seismic cycle. Potential changes could result in detectable low-frequency signals that may signal the early stages of failure, providing a modest warning of the event.

Development by extrusion of soyabari snack sticks: a nutritionally improved soya-maize product based on the Nigerian snack (kokoro).

Science.gov (United States)

Omueti, O; Morton, I D

1996-01-01

A nutritionally improved local snack compared to existing kokoro has been developed by extrusion cooking of different formulations of maize, soybean and condiments such as pepper, onion, salt, palm oil, plantain and banana. The improved snack was named as the 'soyabari snack stick'. The chemical composition of representative extruded products indicates a high level of crude protein, fat, energy, available lysine and improved in vitro digestibility compared to the usual maize-based products. The level of stachyose and raffinose were greatly reduced in the extruded products compared to raw soya. Formulations using various additives yielded products suitable for different consumers' preferences such as hot, sweet, bland, gritty or crispy and acceptable to taste assessors. Soyabari snack sticks were equally acceptable as Bombay mix, a product on the market in London. Sensory analysis showed no significant differences in the two products but the crude fibre content of Bombay mix was higher while the protein was slightly lower than for soyabari sticks. Local ingredients can produce acceptable extrudates.

Transorbital impalement by a wooden stick in a 3-year-old child

DEFF Research Database (Denmark)

Damm, Anders; Lauritsen, Anne Øberg; Klemp, Kristian

2015-01-01

We present a case of a 3-year-old girl with a transorbital impalement injury due to a wooden stick penetrating the lower inferior palpebra and progressing through the orbita, after the child jumped from a table and hit a wooden basket containing pieces of exposed stick. CT revealed the stick prog...... and discharged 2 days later. Follow-up examination 2 months after the trauma demonstrated normal visual acuity and ocular motility, with no diplopia, tearing or pain....

Human stick balancing: Tuning Lèvy flights to improve balance control

Science.gov (United States)

Cabrera, Juan Luis; Milton, John G.

2004-09-01

State-dependent, or parametric, noise is an essential component of the neural control mechanism for stick balancing at the fingertip. High-speed motion analysis in three dimensions demonstrates that the controlling movements made by the fingertip during stick balancing can be described by a Lévy flight. The Lévy index, α, is approximately 0.9; a value close to optimal for a random search. With increased skill, the index α does not change. However, the tails of the Lévy distribution become broader. These observations suggest a Lévy flight that is truncated by the properties of the nervous and musculoskeletal system; the truncation decreasing as skill level increases. Measurements of the cross-correlation between the position of the tip of the stick and the fingertip demonstrate that the role of closed-loop feedback changes with increased skill. Moreover, estimation of the neural latencies for stick balancing show that for a given stick length, the latency increases with skill level. It is suggested that the neural control for stick balancing involves a mechanism in which brief intervals of consciously generated, corrective movements alternate with longer intervals of prediction-free control. With learning the truncation of the Lévy flight becomes better optimized for balance control and hence the time between successive conscious corrections increases. These observations provide the first evidence that changes in a Lévy flight may have functional significance for the nervous system. This work has implications for the control of balancing problems ranging from falling in the elderly to the design of two-legged robots and earthquake proof buildings.

Characterization of cosmetic sticks at Xiaohe Cemetery in early Bronze Age Xinjiang, China.

Science.gov (United States)

Mai, Huijuan; Yang, Yimin; Abuduresule, Idelisi; Li, Wenying; Hu, Xingjun; Wang, Changsui

2016-01-28

Cosmetics have been studied for a long time in the society and culture research, and its consumption is regarded as a cultural symbol of human society. This paper focuses on the analysis of the red cosmetic sticks, found in Xiaohe Cemetery (1980-1450BC), Xinjiang, China. The structure of the red cosmetic sticks was disclosed by SR-μCT scanning (Synchrotron Radiation Micro-computed Tomography), while the chemical components were characterized by FTIR (Fourier Transform Infrared Spectroscopy), Raman Spectroscopy and Proteomics. The results suggested that the cosmetic sticks were made from the cattle heart and covered with a layer of hematite powders as the pigment. Given the numerous red painted relics in Xiaohe Cemetery, this kind of cosmetic sticks might be used as a primitive form of crayon for makeup and painting. The usage of cattle hearts as cosmetic sticks is firstly reported up to our knowledge, which not only reveals the varied utilizations of cattle in Xiaohe Cemetery but also shows the distinctive religious function. Furthermore, these red cosmetic sticks were usually buried with women, implying that the woman may be the painter and play a special role in religious activities.

Knowledge, attitude and practices about needle stick injuries in health care workers

International Nuclear Information System (INIS)

Waqar, S.H.; Siraj, M.U.; Razzaq, Z.; Malik, Z.I.; Zahid, M.A.

2011-01-01

Objectives: To assess knowledge, attitude and practices about needle stick Injuries in health care workers. Study type, settings and duration: Hospital based study carried out at Pakistan Institute of Medical Sciences, Islamabad, from August 2010 to November 2010. Subjects and Methods: A self administered 19 items questionnaire was prepared which contained information about needle stick injuries, its awareness, frequency of injury and the protocols that were followed after an injury had occurred. These questionnaires were given to 500 health care workers working in different wards and theaters of the hospital after obtaining their informed written consent. The health care workers included doctors, nurses and paramedical staff of Pakistan Institute of Medical Sciences, Islamabad. The data was entered and analyzed using SPSS version 15. Results: A total of 500 health care workers filled the questionnaire and returned it. Out of these 416(83.2%) reported ever experiencing needle stick injuries in their professional life. Health care workers working in Emergency department were most frequently affected (65%) followed by those working in different wards (27%) and operation theatre (8%). Most (93.6%) workers had knowledge about needle stick injuries and only 6.4% were not aware of it. Needle stick injury occurred from a brand new (unused) syringe in 51.2% cases, while in 32.8% cases, the needle caused an injury after it had been used for an injection. In 5% cases, injury occurred with blood stained needles. The commonest reasons for needle injury in stick injuries were heavy work load (36.8%) followed by hasty work (33.6%) and needle recapping (18.6%). About 66% health care workers were already vaccinated against hepatitis B. Only 13% workers followed universal guidelines of needle stick injuries and no case was reported to hospital authorities. Conclusions: Health care workers had inadequate knowledge about the risk associated with needle stick injuries and do not

Constellation Stick Figures Convey Information about Gravity and Neutrinos

Science.gov (United States)

Mc Leod, David Matthew; Mc Leod, Roger David

2008-10-01

12/21/98, at America's Stonehenge, DMM detected, and drew, the full stick-figure equivalent of Canis Major, CM, as depicted by our Wolf Clan leaders, and many others. Profound, foundational physics is implied, since this occurred in the Watch House there, hours before the ``model rose.'' Similar configurations like Orion, Osiris of ancient Egypt, show that such figures are projected through solid parts of the Earth, as two-dimensional equivalents of the three-dimensional star constellations. Such ``sticks'' indicate that ``line equivalents'' connect the stars, and the physical mechanism projects outlines detectable by traditional cultures. We had discussed this ``flashlight'' effect, and recognized some of its implications. RDM states that the flashlight is a strong, distant neutrino source; the lines represent neutrinos longitudinally aligned in gravitational excitation, opaque, to earthbound, transient, transversely excited neutrinos. ``Sticks'' represent ``graviton'' detection. Neutrinos' longitudinal alignment accounts for the weakness of gravitational force.

Biofuel from jute stick by pyrolysis technology

Science.gov (United States)

Ferdous, J.; Parveen, M.; Islam, M. R.; Haniu, H.; Takai, K.

2017-06-01

In this study the conversion of jute stick into biofuels and chemicals by externally heated fixed-bed pyrolysis reactor have been taken into consideration. The solid jute stick was characterized through proximate and ultimate analysis, gross calorific values and thermo-gravimetric analysis to investigate their suitability as feedstock for this consideration. The solid biomass particles were fed into the reactor by gravity feed type reactor feeder. The products were oil, char and gases. The liquid and char products were collected separately while the gas was flared into the atmosphere. The process conditions were varied by fixed-bed temperature; feed stock particle size, N2 gas flow rate and running time. All parameters were found to influence the product yields significantly. The maximum liquid yields were 50 wt% of solid jute stick at reactor temperature 425°C for N2 gas flow rate 6 l/min, feed particle size 1180-1700 µm and running time 30 min. Liquid products obtained at these conditions were characterized by physical properties, chemical analysis and GC-MS techniques. The results show that it is possible to obtained liquid products that are comparable to petroleum fuels and valuable chemical feedstock from the selected biomass if the pyrolysis conditions are chosen accordingly.

The Role of Lipsticks and Blush Sticks in Genetic Profiling for Human Identification

Directory of Open Access Journals (Sweden)

Nouman Rasool

2016-06-01

Full Text Available The core objectives of the current study are to generate human DNA profiles from used lipsticks and blush sticks of various brands available in Pakistan. A total of 12 international and local brands of lipsticks and blush sticks were selected. The lipsticks and blush sticks were applied by twenty different healthy female volunteers of 21-30 years of age. The heads of used lipsticks and blush sticks were swabbed with dry sterile cotton swabs. The qualitative and quantitative analysis was done by real time polymerase chain reaction (PCR, using a Quantifiler® Duo DNA Quantification Kit on Real Time PCR ABI™ 7500. Samples were amplified for 16 STR loci using an AmpFlSTR® Identifiler® PCR amplification kit on Thermocycler ABI 9700. The amplified product was run on Applied Biosystems 3130™ Genetic Analyzer. The genetic profiles were analyzed on GeneMapper® ID-X software version 1.0. The quantification results showed that the yield of DNA obtained from lipstick samples was greater than that of DNA obtained from blush stick samples. The real-time PCR results showed that only 16% of cosmetic samples had shown inhibition. The DNA profiles obtained from all blush stick samples were of good quality compared to those from lipstick samples. No profile was obtained from one blush stick sample (DNA 0.001 ng/μL and four lipstick samples (DNA 0.001-0.003 ng/μL because the amount of DNA in each of these samples was less than the amount required for successful amplification. DNA profiles were successfully generated from most of the samples of various available brands of lipsticks and blush sticks. This is the first study proving that DNA profiles can be generated from various lip and face cosmetics.

Listening in on Friction: Stick-Slip Acoustical Signatures in Velcro

Science.gov (United States)

Hurtado Parra, Sebastian; Morrow, Leslie; Radziwanowski, Miles; Angiolillo, Paul

2013-03-01

The onset of kinetic friction and the possible resulting stick-slip motion remain mysterious phenomena. Moreover, stick-slip dynamics are typically accompanied by acoustic bursts that occur temporally with the slip event. The dry sliding dynamics of the hook-and-loop system, as exemplified by Velcro, manifest stick-slip behavior along with audible bursts that are easily micrphonically collected. Synchronized measurements of the friction force and acoustic emissions were collected as hooked Velcro was driven at constant velocity over a bed of looped Velcro in an anechoic chamber. Not surprising, the envelope of the acoustic bursts maps well onto the slip events of the friction force time series and the intensity of the bursts trends with the magnitude of the difference of the friction force during a stick-slip event. However, the analysis of the acoustic emission can serve as a sensitive tool for revealing some of the hidden details of the evolution of the transition from static to kinetic friction. For instance, small acoustic bursts are seen prior to the Amontons-Coulomb threshold, signaling precursor events prior to the onset of macroscopically observed motion. Preliminary spectral analysis of the acoustic emissions including intensity-frequency data will be presented.

Dissociative sticking of CH4 on Ru(0001)

DEFF Research Database (Denmark)

Nielsen, Jane Hvolbæk; Holmblad, Peter Mikal; Chorkendorff, Ib

1999-01-01

In this study the CH4 dissociation probability on Ru(0001) is found for various translational and vibrational energies. The absolute sticking values are determined from King and Wells experiments and carbon uptake curves. The carbon amount is determined from the recombination signal of carbon...... with oxygen obtained after the beam exposure when heating in an oxygen atmosphere. The measured sticking coefficient of CH4 is strongly enhanced both by increasing the translational and the vibrational energy of the CH4 molecule. A model is applied to the data and an estimate of the thermal activation energy...

Needle stick injury in a radiology department: a decade analysis

International Nuclear Information System (INIS)

Sayani, R.; Rajani, A.

2012-01-01

Objectives: To determine the frequency of needle stick injury in health care workers of radiology department. Study type, settings and duration: Cross sectional, observational study conducted at the Radiology department of Aga Khan University hospital from January 2000 to May 2010. Subject and Methods: All self-reported needle stick injuries data of Health care workers of radiology department was recorded. The personnel involved (Radiologist, resident, radiographer, nurses etc), area of working and the causes of injury were identified including the procedural or post procedural details. Patient's status of hepatitis or blood borne infection was also noted. Data was recorded and analyzed in Excel worksheet. Results: A total of 55 health workers reported needle stick injuries at all sections of radiology departments with maximum number needle stick injuries at general radiography, fluoroscopy and IVP section. Radiographers and radiology residents received the maximum number of injuries. Major cause of injury was cannulation however, many injuries occurred during disposing or handling of bin. In majority of cases the patients were not infected with any known blood borne infections. Conclusions: Doctors and nurses get needle-stick injuries while carrying out clinical procedures, while, ancillary staff get infected post procedure during disposal of garbage. Policy message: Good occupational health and safety practices must be promoted to all staff. Safer disposal of needles is an important area where practice and procedure needs to be carefully reviewed. It is necessary to undertake a risk assessment, to offer counseling and Post Exposure Prophylaxis and treatment where necessary. (author)

The effect of a 10-week Zulu stick fighting intervention programme ...

African Journals Online (AJOL)

The article is based on the study that investigated the influence that traditional martial arts of Zulu stick fighting has on body composition of prepubescent males. A sample of fortyfive children were divided into an experimental group (n=22) which underwent a ten week stick fighting intervention programme facilitated by two ...

Squeal vibrations, glass sounds, and the stick-slip effect

International Nuclear Information System (INIS)

Patitsas, A.J.

2010-01-01

The origin of the squeal acoustic emissions when a chalk is rubbed on a blackboard or better on a ceramic plate, and those when a wet finger is rubbed on a smooth surface, such as a glass surface, is sought in the stick-slip effect between the rubbing surfaces. In the case of the squealing chalk, the stick-slip effect is anchored by shear modes of vibration in about a 0.3 mm thick chalk powder band at the rubbing interface, while in the case of the wet finger on glass, by such modes in a band comprising the finger skin. Furthermore, there are the interfacial bands at the contact areas that result in the decrease of the friction coefficient with relative velocity of slide, i.e., the condition for the stick-slip effect to occur. Such bands are basically composed of the asperities on the surface of the chalk band and of the epidermis ridges and the water layer, respectively. (author)

Light-stick: A problem of marine pollution in Brazil.

Science.gov (United States)

Cesar-Ribeiro, Caio; Rosa, Helena Costi; Rocha, Daniele Oliveira; Dos Reis, Camila Galli Baldini; Prado, Tabata Sarti; Muniz, Daniela Hernandes Coimbra; Carrasco, Raquel; Silva, Flávia Milão; Martinelli-Filho, José Eduardo; Palanch-Hans, Maria Fernanda

2017-04-15

Light-sticks are used as bait in surface long-line fishing, to capture swordfish and other large pelagic predators. When discharged in the ocean, it may reach the beaches. The traditional Brazilian community of Costa dos Coqueiros, Bahia, use light-sticks as a medicine for rheumatism, vitiligo and mycoses. It may affect the marine life when its content leak in the open ocean. This work evaluated and identified the acute and chronic toxicity of the light-stick. A high acute toxicity was observed in the mobility/mortality of Artemia sp.; in the fertilization of sea urchin eggs, and a high chronic toxicity in the development of the pluteus larvae of the same sea urchin. The main compounds that probably caused toxicity were the volatiles such as the fluorescent PAH and oxidants such as the hydrogen peroxide. Its disposal in the open ocean is a potential threat for marine life. Copyright © 2017 Elsevier Ltd. All rights reserved.

New Surface-Treatment Technique of Concrete Structures Using Crack Repair Stick with Healing Ingredients.

Science.gov (United States)

Ahn, Tae-Ho; Kim, Hong-Gi; Ryou, Jae-Suk

2016-08-04

This study focused on the development of a crack repair stick as a new repair method along with self-healing materials that can be used to easily repair the cracks in a concrete structure at the construction site. In developing this new repair technique, the self-healing efficiency of various cementitious materials was considered. Likewise, a crack repair stick was developed to apply to concrete structures with 0.3 mm or lower crack widths. The crack repair stick was made with different materials, such as cement, an expansive material (C 12 A₇), a swelling material, and calcium carbonate, to endow it with a self-healing property. To verify the performance of the crack repair stick for concrete structures, two types of procedures (field experiment and field absorption test) were carried out. As a result of such procedures, it was concluded that the developed crack repair stick could be used on concrete structures to reduce repair expenses and for the improved workability, usability, and serviceability of such structures. On the other hand, to evaluate the self-healing performance of the crack repair stick, various tests were conducted, such as the relative dynamic modulus of elasticity test, the water tightness test, the water permeability test, observation via a microscope, and scanning electron microscope (SEM) analysis. From the results, it is found that water leakage can be prevented and that the durability of a concrete structure can be improved through self-healing. Also, it was verified that the cracks were perfectly closed after 28 days due to application of the crack repair stick. These results indicate the usability of the crack repair stick for concrete structures, and its self-healing efficiency.

Development of flow-through and dip-stick immunoassays for screening of sulfonamide residues.

Science.gov (United States)

Zhang, Hongyan; Zhang, Yan; Wang, Shuo

2008-08-20

Two formats of membrane-based competitive enzyme immunoassays (flow-through and dip-stick) have been developed for the screening of sulfonamide residues in pig muscle and milk. Membrane was coated with anti-sulfonamide antibody and a sulfonamide hapten D2-horseradish peroxidase (HRP) conjugant was used as the labeled antigen for competitive assay of sulfonamides. Visual detection limits of the flow-through or dip-stick assay were 1-5 microg L(-1) or 1-10 microg L(-1) in buffer for seven sulfonamides, respectively. Assay validation was performed using samples spiked with single sulfonamide, spiked samples were tested using the developed strip assays and results were compared with those obtained by a validated high-performance liquid chromatograph (HPLC) method. Results showed that the two strip assays were correlated well with HPLC, respectively. With assay times of 5 min (flow-through) and 15 min (dip-stick), these rapid tests could offer simple, rapid and cost-effective on-site screening tools to detect sulfonamides in pig muscle (flow-through or dip-stick) or milk (only dip-stick).

Effects of alloying elements on sticking occurring during hot rolling of ferritic stainless steels

International Nuclear Information System (INIS)

Ha, Dae Jin; Kim, Yong Jin; Lee, Yong Deuk; Lee, Sung Hak; Lee, Jong Seog

2008-01-01

In this study, effects of alloying elements on the sticking occurring during hot rolling of five kinds of ferritic STS430J1L stainless steels were investigated by analyzing high-temperature hardness and oxidation behavior of the rolled steels. Hot-rolling simulation tests were conducted by a high-temperature wear tester which could simulate actual hot rolling. The simulation test results revealed that the sticking process proceeded with three stages, i.e., nucleation, growth, and saturation. Since the hardness continuously decreased as the test temperature increased, whereas the formation of Fe-Cr oxides in the rolled steel surface region increased, the sticking of five stainless steels was evaluated by considering both the high-temperature hardness and oxidation effects. The addition of Zr, Cu, or Si had a beneficial effect on the sticking resistance, while the Ni addition did not show any difference in the sticking. Particularly in the case of the Si addition, Si oxides formed first in the initial stage of high-temperature oxidation, worked as initiation sites for Fe-Cr oxides, accelerated the formation of Fe-Cr oxides, and thus raised the sticking resistance by about 10 times in comparison with the steel without Si content

[Survey of studies on time factor in acupoint sticking therapy for the bronchial asthma].

Science.gov (United States)

Huang, Dong-e; Guo, Jian-hong; Lin, Ying

2010-02-01

Based on the retrieval of literatures in recent fifteen years, the time factors in the acupoint sticking therapy for the bronchial asthma are analyzed and compared in terms of the stage classification of patients, timing selection of acupoint sticking therapy and medication application, and times of application. The acupoint sticking therapy is mostly practiced during remittent stage of bronchial asthma; the timing selection is mostly during the hottest period of summer, the timing selection in certain cases is the coldest period of winter or any day; the duration of medication application is not consistent; therefore, the effectiveness of these cases is different. It may be that the ef fectiveness is proportional to the times and courses of acupoint sticking therapy for the bronchial asthma. In the future, the scientific designs which involve time factor are needed to elucidate the importance of time factor in acupoint sticking therapy for the bronchial asthma.

On a credit oscillatory system with the inclusion of stick-slip

Directory of Open Access Journals (Sweden)

Parovik Roman

2016-01-01

Full Text Available The work was a mathematical model that describes the effect of the sliding attachment (stick-slip, taking into account hereditarity. This model can be regarded as a mechanical model of earthquake preparation. For such a model was proposed explicit finite- difference scheme, on which were built the waveform and phase trajectories hereditarity effect of stick-slip.

Method to determine the sticking coefficient of precursor molecules in atomic layer deposition

International Nuclear Information System (INIS)

Rose, M.; Bartha, J.W.

2009-01-01

A method to determine the sticking coefficient of precursor molecules used in atomic layer deposition (ALD) will be introduced. The sticking coefficient is an interesting quantity for comparing different ALD processes and reactors but it cannot be observed easily. The method relies on free molecular flow in nanoscale cylindrical holes. The sticking coefficient is determined for tetrakis(dimethylamino)titanium in combination with ozone. The proposed method can be applied independent of the type of reactor, precursor delivery system and precursors.

Parametric analysis of the statistical model of the stick-slip process

Science.gov (United States)

Lima, Roberta; Sampaio, Rubens

2017-06-01

In this paper it is performed a parametric analysis of the statistical model of the response of a dry-friction oscillator. The oscillator is a spring-mass system which moves over a base with a rough surface. Due to this roughness, the mass is subject to a dry-frictional force modeled as a Coulomb friction. The system is stochastically excited by an imposed bang-bang base motion. The base velocity is modeled by a Poisson process for which a probabilistic model is fully specified. The excitation induces in the system stochastic stick-slip oscillations. The system response is composed by a random sequence alternating stick and slip-modes. With realizations of the system, a statistical model is constructed for this sequence. In this statistical model, the variables of interest of the sequence are modeled as random variables, as for example, the number of time intervals in which stick or slip occur, the instants at which they begin, and their duration. Samples of the system response are computed by integration of the dynamic equation of the system using independent samples of the base motion. Statistics and histograms of the random variables which characterize the stick-slip process are estimated for the generated samples. The objective of the paper is to analyze how these estimated statistics and histograms vary with the system parameters, i.e., to make a parametric analysis of the statistical model of the stick-slip process.

Process Development for the Design and Manufacturing of Personalizable Mouth Sticks.

Science.gov (United States)

Berger, Veronika M; Pölzer, Stephan; Nussbaum, Gerhard; Ernst, Waltraud; Major, Zoltan

2017-01-01

To increase the independence of people with reduced hand/arm functionality, a process to generate personalizable mouth sticks was developed based on the participatory design principle. In a web tool, anybody can choose the geometry and the materials of their mouth piece, stick and tip. Manufacturing techniques (e.g. 3D printing) and materials used in the process are discussed and evaluated.

Studying friction while playing the violin: exploring the stick-slip phenomenon.

Science.gov (United States)

Casado, Santiago

2017-01-01

Controlling the stick-slip friction phenomenon is of major importance for many familiar situations. This effect originates from the periodic rupture of junctions created between two rubbing surfaces due to the increasing shear stress at the interface. It is ultimately responsible for the behavior of many braking systems, earthquakes, and unpleasant squeaky sounds caused by the scratching of two surfaces. In the case of a musical bow-stringed instrument, stick-slip is controlled in order to provide well-tuned notes at different intensities. A trained ear is able to distinguish slight sound variations caused by small friction differences. Hence, a violin can be regarded as a perfect benchmark to explore the stick-slip effect at the mesoscale. Two violin bow hairs were studied, a natural horse tail used in a professional philharmonic orchestra, and a synthetic one used with a violin for beginners. Atomic force microscopy characterization revealed clear differences when comparing the surfaces of both bow hairs, suggesting that a structure having peaks and a roughness similar to that of the string to which both bow hairs rubbed permits a better control of the stick-slip phenomenon.

Smart Blinding Stick with Holes,Obstacles and Ponds Detector Based on Microcontroller

Directory of Open Access Journals (Sweden)

Mohammed Azher Therib

2017-08-01

Full Text Available In this work, a device is designed and implemented that it is doing three jobs in order to help blind people to walk without accidents may occur. The first proposed one is accomplished by putting the ultrasonic sensor in a measured angle about 40o on a suitable blinding stick to detect if there is a hole or stair in front of blind at about 48 cm distance to prevent him from falling and as a result may be causing many injuries. The second one uses a moisture sensor in the first leg of the four legs stick to measure the degree of the land soil moisture in front of the blind and alert him when that degree exceeds a measured level that may immerse the feet of him. While, the third one is made by using another ultrasonic sensor on the stick to turn an alarm ON when there is an obstacle, person, or wall at a small distance about 50 cm near him to prevent a collision accident. The stick is implemented practically using four leg blinding cane, Arduino microcontroller and the three sensors. Also, the three buzzers and one vibrator motor and three LEDs are used on the stick to turn on when a such problems occur. The device gives good results when many visually impaired people in Merjan medical city in Babylon used it.

A study of needle stick injuries among non-consultant hospital doctors in Ireland.

LENUS (Irish Health Repository)

O'Connor, M B

2011-06-01

NCHDs are exposed to a great number of blood-borne infections. Needle stick injuries are possibly the main route of acquiring such infections from a non-consultant hospital doctors (NCHDs) perspective. This study examines NCHDs experiences surrounding needle stick injuries.

Functionally different pads on the same foot allow control of attachment: stick insects have load-sensitive "heel" pads for friction and shear-sensitive "toe" pads for adhesion.

Directory of Open Access Journals (Sweden)

David Labonte

Full Text Available Stick insects (Carausius morosus have two distinct types of attachment pad per leg, tarsal "heel" pads (euplantulae and a pre-tarsal "toe" pad (arolium. Here we show that these two pad types are specialised for fundamentally different functions. When standing upright, stick insects rested on their proximal euplantulae, while arolia were the only pads in surface contact when hanging upside down. Single-pad force measurements showed that the adhesion of euplantulae was extremely small, but friction forces strongly increased with normal load and coefficients of friction were [Formula: see text] 1. The pre-tarsal arolium, in contrast, generated adhesion that strongly increased with pulling forces, allowing adhesion to be activated and deactivated by shear forces, which can be produced actively, or passively as a result of the insects' sprawled posture. The shear-sensitivity of the arolium was present even when corrected for contact area, and was independent of normal preloads covering nearly an order of magnitude. Attachment of both heel and toe pads is thus activated partly by the forces that arise passively in the situations in which they are used by the insects, ensuring safe attachment. Our results suggest that stick insect euplantulae are specialised "friction pads" that produce traction when pressed against the substrate, while arolia are "true" adhesive pads that stick to the substrate when activated by pulling forces.

The Philippine "Hip Hop Stick Dance"

Science.gov (United States)

Lewis, Lisa

2012-01-01

This article introduces a dance that blends the traditional cultural heritage of the Philippines with modern music and moves. "Hip Hop Stick Dance" incorporates Tinikling (the Philippine national dance) and Arnis (a Filipino style of martial arts) to create a contemporary combination of rhythm, dance, and fitness. It was designed to introduce…

Fracture energy of stick-slip events in a large scale biaxial experiment

International Nuclear Information System (INIS)

Okubo, P.G.; Dieterich, J.H.

1981-01-01

The concept of apparent fracture energy for the shear failure process is employed by many authors in modeling earthquake sources as dynamically extending shear cracks. Using records of shear strain and relative displacement from stick-slip events generated along a simulated, prepared fault surface in a large (1.5m x 1.5m x 0.4m) granite block and a slip-weakening model for the fault, direct estimates of the apparent shear fracture energy of the stick-slip events have been obtained. For events generated on a finely ground fault surface, apparent fracture energy ranges from 0.06 J/m 2 at a normal stress of 1.1 MPa to 0.8 J/m 2 at a normal stress of 4.6 MPa. In contrast to estimates for tensile crack formation, we find that the apparent fracture energy of stick-slip events increases linearly with normal stress. The results for the slip-weakening model for the stick-slip events are generally consistent with constitutive fault models suggested by observations of stable sliding in smaller scale experiments

Natural oils and waxes: studies on stick bases.

Science.gov (United States)

Budai, Lívia; Antal, István; Klebovich, Imre; Budai, Marianna

2012-01-01

The objective of the present article was to examine the role of origin and quantity of selected natural oils and waxes in the determination of the thermal properties and hardness of stick bases. The natural oils and waxes selected for the study were sunflower, castor, jojoba, and coconut oils. The selected waxes were yellow beeswax, candelilla wax, and carnauba wax. The hardness of the formulations is a critical parameter from the aspect of their application. Hardness was characterized by the measurement of compression strength along with the softening point, the drop point, and differential scanning calorimetry (DSC). It can be concluded that coconut oil, jojoba oil, and carnauba wax have the greatest influence on the thermal parameters of stick bases.

The Effect of Stick Stiffness of Friction Models on the Bending Behavior in Non-Bonded Flexible Risers

OpenAIRE

Dai, Tianjiao; Ye, Naiquan; Sævik, Svein

2017-01-01

This paper investigates the effect of stick stiffness on the bending behavior in non-bonded flexible risers. The stick stiffness was normally implemented in the friction model for calculating the friction stress between layers in such structures. As the stick stiffness may be too small to achieve the plane-surfaces-remain-plane assumption under low contact pressure in some friction models [1], a new friction model was proposed for maintaining the constant stick stiffness in the present work. ...

Study of the influences of rotary table speed on stick-slip vibration of the drilling system

Directory of Open Access Journals (Sweden)

Liping Tang

2015-12-01

Full Text Available Stick-slip vibration presents one of the major causes of drilling problems, such as premature tool failures, low drilling efficiency and poor wellbore quality. The objective of this work is to investigate the influences of rotary table speed (RTS on stick-slip phenomenon of the drilling system. In this study, the drilling system is treated as a lumped torsional pendulum model of which the bit/rock interaction is regarded as Coulomb friction. By analyzing cases with different RTS, two types of vibrations on the bit are found: stick-slip vibration and uniform motion. With an increase in the RTS, the stick-slip vibration on the drill bit disappears once the RTS arrives at its critical value. For the cases that stick-slip vibrations occur, the phase trajectories converge toward a limit cycle. For the cases that stick-slip vibration does not appear, the drill bit tends to stabilize at a uniform motion and the phase trajectories correspond to contracting spirals observed in the phase plane.

Effect of video-game experience and position of flight stick controller on simulated-flight performance.

Science.gov (United States)

Cho, Bo-Keun; Aghazadeh, Fereydoun; Al-Qaisi, Saif

2012-01-01

The purpose of this study was to determine the effects of video-game experience and flight-stick position on flying performance. The study divided participants into 2 groups; center- and side-stick groups, which were further divided into high and low level of video-game experience subgroups. The experiment consisted of 7 sessions of simulated flying, and in the last session, the flight stick controller was switched to the other position. Flight performance was measured in terms of the deviation of heading, altitude, and airspeed from their respective requirements. Participants with high experience in video games performed significantly better (p increase (0.78 %). However, after switching from a center- to a side-stick controller, performance scores decreased (4.8%).

Numerical Simulations of Slow Stick Slip Events with PFC, a DEM Based Code

Science.gov (United States)

Ye, S. H.; Young, R. P.

2017-12-01

Nonvolcanic tremors around subduction zone have become a fascinating subject in seismology in recent years. Previous studies have shown that the nonvolcanic tremor beneath western Shikoku is composed of low frequency seismic waves overlapping each other. This finding provides direct link between tremor and slow earthquakes. Slow stick slip events are considered to be laboratory scaled slow earthquakes. Slow stick slip events are traditionally studied with direct shear or double direct shear experiment setup, in which the sliding velocity can be controlled to model a range of fast and slow stick slips. In this study, a PFC* model based on double direct shear is presented, with a central block clamped by two side blocks. The gauge layers between the central and side blocks are modelled as discrete fracture networks with smooth joint bonds between pairs of discrete elements. In addition, a second model is presented in this study. This model consists of a cylindrical sample subjected to triaxial stress. Similar to the previous model, a weak gauge layer at a 45 degrees is added into the sample, on which shear slipping is allowed. Several different simulations are conducted on this sample. While the confining stress is maintained at the same level in different simulations, the axial loading rate (displacement rate) varies. By varying the displacement rate, a range of slipping behaviour, from stick slip to slow stick slip are observed based on the stress-strain relationship. Currently, the stick slip and slow stick slip events are strictly observed based on the stress-strain relationship. In the future, we hope to monitor the displacement and velocity of the balls surrounding the gauge layer as a function of time, so as to generate a synthetic seismogram. This will allow us to extract seismic waveforms and potentially simulate the tremor-like waves found around subduction zones. *Particle flow code, a discrete element method based numerical simulation code developed by

The Donkey and the Stick: Revisited.

Science.gov (United States)

Smith, Clifford E.

The fable of the "Donkey and the Stick" is used as an analogy to present day industrial relations problems. The managerial approach of autocratic leadership has long since outlived its usefulness; rewards based along Maslow's hierarchy of needs should be used for employee motivation. The point is made from the fable that employees can't be…

Earthquake source properties from instrumented laboratory stick-slip

Science.gov (United States)

Kilgore, Brian D.; McGarr, Arthur F.; Beeler, Nicholas M.; Lockner, David A.; Thomas, Marion Y.; Mitchell, Thomas M.; Bhat, Harsha S.

2017-01-01

Stick-slip experiments were performed to determine the influence of the testing apparatus on source properties, develop methods to relate stick-slip to natural earthquakes and examine the hypothesis of McGarr [2012] that the product of stiffness, k, and slip duration, Δt, is scale-independent and the same order as for earthquakes. The experiments use the double-direct shear geometry, Sierra White granite at 2 MPa normal stress and a remote slip rate of 0.2 µm/sec. To determine apparatus effects, disc springs were added to the loading column to vary k. Duration, slip, slip rate, and stress drop decrease with increasing k, consistent with a spring-block slider model. However, neither for the data nor model is kΔt constant; this results from varying stiffness at fixed scale.In contrast, additional analysis of laboratory stick-slip studies from a range of standard testing apparatuses is consistent with McGarr's hypothesis. kΔt is scale-independent, similar to that of earthquakes, equivalent to the ratio of static stress drop to average slip velocity, and similar to the ratio of shear modulus to wavespeed of rock. These properties result from conducting experiments over a range of sample sizes, using rock samples with the same elastic properties as the Earth, and scale-independent design practices.

Occurrence and knowledge about needle stick injury in nursing students

International Nuclear Information System (INIS)

Prasuna, J.; Sharma, R.

2015-01-01

Needle stick injury (NSI) became a major issue and most of the research focuses on Nurses, Doctors and other health care workers, but at the same time nursing students in clinical duties are at high risk. Studies are available which examined NSI only in Medical students and health care workers. The present study is aimed to measure the occurrence of needle stick injury along with post exposure measures and evaluation of the knowledge regarding needle stick injury among nursing student. Methods: A cross-sectional study was conducted in North-East India in 2013. The study participants comprised of 83 nursing students studying in 4th year B.Sc. (N) and 3rd year General Nursing and Midwifery (GNM). Students were questioned regarding their occurrence to Needle Stick Injury throughout their clinical training and measures taken following the exposure. They were also asked to complete the Knowledge questionnaire on NSI. Results: The study among 83 nursing students included 43 (51.81%) GNM 3rd year and 40 (48.19%) B.Sc. Nursing Students. Out of a total 83 students, 75 (90.36%) were females. The occurrence of NSI during their course was reported by 33 (39.76%) participants. The maximum NSI occurred during first year of course (57.57%). It was found that 18 (54.54%) of NSIs were not reported. Among those exposed, only 5 (15.15%) students had undergone blood investigation and very few students took post exposure measures. It was found that, only 23 (69.69%) students were immunized against Hepatitis B before NSI. Conclusion: The present study indicated a high incidence of needle stick injuries among nursing students with more under-reported cases and subjects were not aware of post exposure measures. It is essential to deal above problems by regular training on real-life procedure at the entry level and reporting system should be more user-friendly platform. (author)

The surface temperature effect on the dissociative sticking of N2 on Fe(111)

DEFF Research Database (Denmark)

Henriksen, Niels Engholm; Hansen, Flemming Yssing; Billing, Gert Due

1995-01-01

We present the first realistic calculation of the surface temperature effect on the dissociative sticking probability of molecular nitrogen on Fe(111). Extensive quantum dynamical calculations show that, depending on the impact point in the unit cell, the sticking probabilities can increase as well...... as decrease as a function of the surface temperature. The magnitude of the temperature effect on randomly chosen impact points is comparable with the experimental observation. Since only a small fraction of the impacts give a significant contribution to the sticking and the alternating temperature effect...

The CRESST-III iStick veto. Stable operation of multiple transition edge sensors in one readout circuit

Energy Technology Data Exchange (ETDEWEB)

Rothe, Johannes [Max-Planck-Institut f. Physik (Werner-Heisenberg-Institut) (Germany); Ludwig-Maximilians-Universitaet Muenchen (Germany); Collaboration: CRESST-Collaboration

2016-07-01

To enable complete rejection of holder-related events in the upcoming CRESST-III dark matter search experiment, the scintillating target crystals are held by calcium tungstate sticks (iSticks) instrumented with tungsten transition edge sensors (TESs). Since the iStick signals are used exclusively for vetoing, it is sufficient to register if an event happened in any stick, without knowing which one. This allows the operation of all iSticks in a single readout circuit, requiring just one SQUID magnetometer. The talk describes the effect of bias current heating and corresponding hysteresis phenomena known in single-TES circuits, and the resulting conditions for stability in multiple-TES circuits. The fundamentally different behaviour of parallel and series circuits and resulting design choices are explored.

Prevalence of needle stick injuries among healthcare workers

African Journals Online (AJOL)

Abe Olugbenga

stick injury among healthcare workers at the Federal Medical Centre (FMC), Owerri. Materials and ... health workers when exposed to work .... factors and prevention of Health care workers at .... software called Statistical Package for Social.

Numerical analysis for the stick-slip vibration of a transversely moving beam in contact with a frictional wall

Science.gov (United States)

Won, Hong-In; Chung, Jintai

2018-04-01

This paper presents a numerical analysis for the stick-slip vibration of a transversely moving beam, considering both stick-slip transition and friction force discontinuity. The dynamic state of the beam was separated into the stick state and the slip state, and boundary conditions were defined for both. By applying the finite element method, two matrix-vector equations were derived: one for stick state and the other for slip state. However, the equations have different degrees of freedom depending on whether the end of a beam sticks or slips, so we encountered difficulties in time integration. To overcome the difficulties, we proposed a new numerical technique to alternatively use the matrix-vector equations with different matrix sizes. In addition, to eliminate spurious high-frequency responses, we applied the generalized-α time integration method with appropriate value of high-frequency numerical dissipation. Finally, the dynamic responses of stick-slip vibration were analyzed in time and frequency domains: the dynamic behavior of the beam was explained to facilitate understanding of the stick-slip motion, and frequency characteristics of the stick-slip vibration were investigated in relation to the natural frequencies of the beam. The effects of the axial load and the moving speed upon the dynamic response were also examined.

Sticking efficiency of nanoparticles in high-velocity collisions with various target materials

International Nuclear Information System (INIS)

Reissaus, Philipp; Waldemarsson, Tomas; Blum, Juergen; Clement, Dominik; Llamas, Isabel; Mutschke, Harald; Giovane, Frank

2006-01-01

In order to find reliable collector surfaces for the Mesospheric Aerosol - Genesis, Interaction and Composition (MAGIC) sounding rocket experiment, intended to collect atmospheric nanoparticles, the sticking efficiency of nanoparticles was measured on several targets of different materials. The nanoparticles were generated by a molecular beam apparatus in Jena, Germany, by laser ablation (Al 2 O 3 particles, diameter 5-50 nm) and by laser pyrolysis (carbon particles, diameter 10-20 nm). In a vacuum environment (>10 -5 mbar) the particles condensed from the gas phase, formed a particle beam, and were accelerated to ∼∼1 km/s. The sticking efficiency on the target materials carbon, gold and grease was measured by a microbalance. Results demonstrate moderate to high sticking probabilities. Thus, the capture and retrieval of atmospheric nanoparticles was found to be quantitatively feasible

Determination of the sticking coefficient of low-energy hydrocarbon ions

International Nuclear Information System (INIS)

Tichmann, Klaus Markus

2011-01-01

The maximum lifetime of future fusion facilities like ITER will be limited by the retention of radioactive tritium in the vessel walls. The retention is significantly affected by the sticking coefficient of hydrocarbon molecules that form in the machine. Using a particle-beam experiment, this sticking coefficient was determined for multiple species at energies below 200 eV. The equipment for the production of the particle beam was optimised and a new ion source for hydrocarbon ions was developed. Simulations using molecular dynamics were performed in parallel to improve the understanding of the processes at the surface.

Craft Stick Beams

Science.gov (United States)

Karplus, Alan K.

1996-01-01

The objective of this exercise is to provide a phenomenological 'hands-on' experience that shows how geometry can affect the load carrying capacity of a material used in construction, how different materials have different failure characteristics, and how construction affects the performance of a composite material. This will be accomplished by building beams of a single material and composite beams of a mixture of materials (popsicle sticks, fiberboard sheets, and tongue depressors); testing these layered beams to determine how and where they fail; and based on the failure analysis, designing a layered beam that will fail in a predicted manner. The students will learn the effects of lamination, adhesion, and geometry in layered beam construction on beam strength and failure location.

Creep to inertia dominated stick-slip behavior in sliding friction modulated by tilted non-uniform loading

Science.gov (United States)

Tian, Pengyi; Tao, Dashuai; Yin, Wei; Zhang, Xiangjun; Meng, Yonggang; Tian, Yu

2016-09-01

Comprehension of stick-slip motion is very important for understanding tribological principles. The transition from creep-dominated to inertia-dominated stick-slip as the increase of sliding velocity has been described by researchers. However, the associated micro-contact behavior during this transition has not been fully disclosed yet. In this study, we investigated the stick-slip behaviors of two polymethyl methacrylate blocks actively modulated from the creep-dominated to inertia-dominated dynamics through a non-uniform loading along the interface by slightly tilting the angle of the two blocks. Increasing the tilt angle increases the critical transition velocity from creep-dominated to inertia-dominated stick-slip behaviors. Results from finite element simulation disclosed that a positive tilt angle led to a higher normal stress and a higher temperature on blocks at the opposite side of the crack initiating edge, which enhanced the creep of asperities during sliding friction. Acoustic emission (AE) during the stick-slip has also been measured, which is closely related to the different rupture modes regulated by the distribution of the ratio of shear to normal stress along the sliding interface. This study provided a more comprehensive understanding of the effect of tilted non-uniform loading on the local stress ratio, the local temperature, and the stick-slip behaviors.

Multielement analysis of Nigerian chewing sticks by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Asubiojo, O.I.; Guinn, V.P.

1982-01-01

In Nigeria, various parts of various species of native plants have long been used for dental hygiene, with reportedly considerable effectiveness. These materials are known as 'chewing sticks'. This study was an effort to ascertain whether any unusual trace element concentrations might be present in Nigerian chewing sticks. Results are presented for 17 elements (Na, Mg, Al, Cl, K, Ca, Sc, V, Mn, Fe, Co, Zn, Br, Cs, La, Sm, Au) detected and measured in 12 species of such plants, via instrumental thermal-neutron activation analysis. (author)

Design and Experimental Research of a Novel Stick-Slip Type Piezoelectric Actuator

Directory of Open Access Journals (Sweden)

Mingxing Zhou

2017-05-01

Full Text Available A linear piezoelectric actuator based on the stick-slip principle is presented and tested in this paper. With the help of changeable vertical preload force flexure hinge, the designed linear actuator can achieve both large travel stick-slip motion and high-resolution stepping displacement. The developed actuator mainly consists of a bridge-type flexure hinge mechanism, a compound parallelogram flexure hinge mechanism, and two piezoelectric stacks. The mechanical structure and motion principle of the linear actuator were illustrated, and the finite element method (FEM is adopted. An optimal parametric study of the flexure hinge is performed by a finite element analysis-based response surface methodology. In order to investigate the actuator’s working performance, a prototype was manufactured and a series of experiments were carried out. The results indicate that the maximum motion speed is about 3.27 mm/s and the minimum stepping displacement is 0.29 μm. Finally, a vibration test was carried out to obtain the first natural frequency of the actuator, and an in situ observation was conducted to investigate actuator’s stick-slip working condition. The experimental results confirm the feasibility of the proposed actuator, and the motion speed and displacement are both improved compared with the traditional stick-slip motion actuator.

Evaluation of rheological, bioactives and baking characteristics of mango ginger (curcuma amada) enriched soup sticks.

Science.gov (United States)

Crassina, K; Sudha, M L

2015-09-01

Wheat flour was replaced with mango ginger powder (MGP) at 0, 5, 10 and 15 %. Influence of MGP on rheological and baking characteristics was studied. Farinograph was used to study the mixing profile of wheat flour-MGP blend. Pasting profile of the blends namely gelatinization and retrogradation were carried out using micro-visco-amylograph. Test baking was done to obtain the optimum level of replacement and processing conditions. Sensory attributes consisting texture, taste, overall quality and breaking strength were assessed. Nutritional characterization of the soup sticks in terms of protein and starch in vitro digestibility, dietary fiber, minerals, polyphenols and antioxidant activity were determined using standard methods. With the increasing levels of MGP from 0 to 15 %, the farinograph water absorption increased from 60 to 66.7 %. A marginal increase in the gelatinization temperature from 65.4 to 66.2 °C was observed. Retrogradation of gelatinized starch granules decreased with the addition of MGP. The results indicated that the soup stick with 10 % MG had acceptable sensory attributes. The soup stick showed further improvement in terms of texture and breaking strength with the addition of gluten powder, potassium bromate and glycerol monostearate. The total dietary fiber and antioxidant activity of the soup sticks having 10 % MGP increased from 3.31 to 8.64 % and 26.83 to 48.06 % respectively as compared to the control soup sticks. MGP in soup sticks improved the nutritional profile.

An experimental and numerical investigation of head dynamics due to stick impacts in girls' lacrosse.

Science.gov (United States)

Morse, Justin D; Franck, Jennifer A; Wilcox, Bethany J; Crisco, Joseph J; Franck, Christian

2014-12-01

A method of investigating head acceleration and intracranial dynamics from stick impacts in girls' and women's lacrosse was developed using headform impact experiments and a finite element head model. Assessing the likelihood of head injury due to stick-head impacts is of interest in girls' and women's lacrosse due to the current lack of head protection during play. Experimental and simulation data were compared to characterize the head acceleration caused by stick-head impacts. Validation against cadaver head impact experiments ensures that the finite element model, with its relatively simple material properties, can provide means to develop a better understanding of the intracranial dynamics during lacrosse stick impacts. Our numerical results showed the peak acceleration at the center of gravity increased linearly with impact force, and was generally in agreement with the experimental data. von Mises stresses and peak principal strains, two common literature injury indicators, were examined within the finite element model, and peak values were below the previously reported thresholds for mild traumatic brain injury. By reconstructing typical in-game, unprotected stick-head impacts, this investigation lays the foundation for a quantitative methodology of injury prediction in girls' and womens' lacrosse.

Phytochemical screening and mineral composition of chewing sticks ...

African Journals Online (AJOL)

Phytochemical screening of the stems of Garcinia kola, Dennettia tripetala, Acioa barteri, Dialium guineense, Maesobotrya barteri, Mallotus oppositifolius and Psidium guajava which are commonly used as chewing sticks in southern Nigeria revealed the presence of bioactive compounds comprising saponins, tannins, ...

'Food Sticking in My Throat': Videofluoroscopic Evaluation of a Common Symptom.

Science.gov (United States)

Madhavan, Aarthi; Carnaby, Giselle D; Crary, Michael A

2015-06-01

Prevalence of the symptom of food 'sticking' during swallowing has been reported to range from 5 to 50%, depending on the assessment setting. However, limited objective evidence has emerged to clarify factors that contribute to this symptom. Three hundred and fifteen patient records from an outpatient dysphagia clinic were reviewed to identify patients with symptoms of 'food sticking in the throat.' Corresponding videofluoroscopic swallowing studies for patients with this complaint were reviewed for the following variables: accuracy of symptom localization, identification and characteristics (anatomic, physiologic) of an explanatory cause for the symptom, and the specific swallowed material that identified the explanatory cause. One hundred and forty one patients (45%) were identified with a complaint of food 'sticking' in their throat during swallowing. Prevalence of explanatory findings on fluoroscopy was 76% (107/141). Eighty five percent (91/107) of explanatory causes were physiologic in nature, while 15% (16/107) were anatomic. The majority of explanatory causes were identified in the esophagus (71%). Symptom localization was more accurate when the explanatory cause was anatomic versus physiologic (75 vs. 18%). A non-masticated marshmallow presented with the highest diagnostic yield in identification of explanatory causes (71%). Patients complaining of 'food sticking in the throat' are likely to present with esophageal irregularities. Thus, imaging studies of swallowing function should include the esophagus. A range of materials, including a non-masticated marshmallow, is helpful in determining the location and characteristics of swallowing deficits contributing to this symptom.

Multielement analysis of Nigerian chewing sticks by instrumental neutron activation analysis

Energy Technology Data Exchange (ETDEWEB)

Asubiojo, O.I.; Guinn, V.P. (California Univ., Irvine (USA). Dept. of Chemistry); Okunuga, A. (California Polytechnic Univ., Pomona, CA (USA))

1982-01-01

In Nigeria, various parts of various species of native plants have long been used for dental hygiene, with reportedly considerable effectiveness. These materials are known as 'chewing sticks'. This study was an effort to ascertain whether any unusual trace element concentrations might be present in Nigerian chewing sticks. Results are presented for 17 elements (Na, Mg, Al, Cl, K, Ca, Sc, V, Mn, Fe, Co, Zn, Br, Cs, La, Sm, Au) detected and measured in 12 species of such plants, via instrumental thermal-neutron activation analysis.

Molecular beam study of dissociative sticking of methane on Ni(100)

DEFF Research Database (Denmark)

Holmblad, Peter Mikal; Wambach, Jørg; Chorkendorff, Ib

1995-01-01

of the methane leads to a dramatic enhancement of the sticking, emphasizing that the initial vibrational state is of crucial importance. These results are consistent with a mechanism of direct activated dissociative chemisorption where the dynamics is dominated by a barrier in the potential energy surface mainly...... located in the vibrational coordinates. Normal-energy scaling is only approximately observed. The effect of surface temperature is also investigated but is found to be smaller than activation by translational or vibrational energy. A simplified analysis in terms of state resolved sticking curves, Snu...... American Institute of Physics....

Vehicle steering by side stick: optimising steering characteristics

NARCIS (Netherlands)

Zuurbier, J.; Hogema, J.H.; Brekelmans, J.A.W.J.

2000-01-01

This paper describes a study that was conducted to investigate the possibilities for optimizing task performance when driving a side stick-steered vehicle. Using steer-by-wire technology, a conventional steering system was mimicked, thus yielding the possibility to modify the steering

Spatio-temporal foreshock activity during stick-slip experiments of large rock samples

Science.gov (United States)

Tsujimura, Y.; Kawakata, H.; Fukuyama, E.; Yamashita, F.; Xu, S.; Mizoguchi, K.; Takizawa, S.; Hirano, S.

2016-12-01

Foreshock activity has sometimes been reported for large earthquakes, and has been roughly classified into the following two classes. For shallow intraplate earthquakes, foreshocks occurred in the vicinity of the mainshock hypocenter (e.g., Doi and Kawakata, 2012; 2013). And for intraplate subduction earthquakes, foreshock hypocenters migrated toward the mainshock hypocenter (Kato, et al., 2012; Yagi et al., 2014). To understand how foreshocks occur, it is useful to investigate the spatio-temporal activities of foreshocks in the laboratory experiments under controlled conditions. We have conducted stick-slip experiments by using a large-scale biaxial friction apparatus at NIED in Japan (e.g., Fukuyama et al., 2014). Our previous results showed that stick-slip events repeatedly occurred in a run, but only those later events were preceded by foreshocks. Kawakata et al. (2014) inferred that the gouge generated during the run was an important key for foreshock occurrence. In this study, we proceeded to carry out stick-slip experiments of large rock samples whose interface (fault plane) is 1.5 meter long and 0.5 meter wide. After some runs to generate fault gouge between the interface. In the current experiments, we investigated spatio-temporal activities of foreshocks. We detected foreshocks from waveform records of 3D array of piezo-electric sensors. Our new results showed that more than three foreshocks (typically about twenty) had occurred during each stick-slip event, in contrast to the few foreshocks observed during previous experiments without pre-existing gouge. Next, we estimated the hypocenter locations of the stick-slip events, and found that they were located near the opposite end to the loading point. In addition, we observed a migration of foreshock hypocenters toward the hypocenter of each stick-slip event. This suggests that the foreshock activity observed in our current experiments was similar to that for the interplate earthquakes in terms of the

First observation of Dorylus ant feeding in Budongo chimpanzees supports absence of stick-tool culture.

Science.gov (United States)

Mugisha, Steven; Zuberbühler, Klaus; Hobaiter, Catherine

2016-07-01

The use of stick- or probe-tools is a chimpanzee universal, recorded in all long-term study populations across Africa, except one: Budongo, Uganda. Here, after 25 years of observation, stick-tool use remains absent under both natural circumstances and strong experimental scaffolding. Instead, the chimpanzees employ a rich repertoire of leaf-tools for a variety of dietary and hygiene tasks. One use of stick-tools in other communities is in feeding on the aggressive Dorylus 'army ant' species, consumed by chimpanzees at all long-term study sites outside of mid-Western Uganda. Here we report the first observation of army-ant feeding in Budongo, in which individuals from the Waibira chimpanzee community employed detached leaves to feed on a ground swarm. We describe the behaviour and discuss whether or not it can be considered tool use, together with its implication for the absence of stick-tool 'culture' in Budongo chimpanzees.

Use of Pleurotus sajor-caju in upgrading green jute plants and jute sticks as ruminant feed

Directory of Open Access Journals (Sweden)

Zinat Mahal

2013-01-01

Full Text Available In this study, superfluous jute plants and jute stick were converted into upgraded animal feed by solid state fermentation (SSF using a cellulolytic fungus, Pleurotus sajor-caju. Prior to fermentation, substrates were subjected to several pretreatments such as soaking with water overnight and alkali or lime pretreatment. SSF was carried out with 20 g of substrate in 100 ml conical flask and was incubated at 30C for 8 weeks. In all treatments, the highest amount of reducing sugar, soluble protein as well as the cellulolytic activities of three enzymes viz. cellobiase, carboxymethyl cellulase and avicelase were obtained at 6th week of fermentation. Compared to raw, unsoaked substrates, soaking treatment alone could produce 10% more soluble protein in both substrates whereas reducing sugar increment was 5% and 6% in jute sticks and jute plants, respectively. From all treatments, combination of soaking and lime treatment in green jute plants yielded higher value than jute sticks in terms of reducing sugar, soluble protein and enzymatic activity. The radiation doses at 20, 30 and 40 kGy appeared to have no effect on sugar and protein accretion. During eight weeks of fermentation, relatively higher cellobiase activity was found compared to that of carboxymethyl cellulase and avicelase. The present investigation indicates that fungal conversion with pretreatment can turn these lignocellulosic agro-wastes to a nutritionally enriched animal feed by increasing the crude protein and reducing sugar content. However, further research is necessary to develop strategies for industrial scale production to overcome the crisis of nutritionally improved animal feed.

Waffle Production: Influence of Baking Plate Material on Sticking of Waffles.

Science.gov (United States)

Huber, Regina; Kalss, Georg; Schoenlechner, Regine

2017-01-01

Background of this study was to understand the factors that contribute to sticking of fresh egg waffles on baking plates. The aim of this study was to investigate the sticking (adhesion) behavior of waffles on 4 different baking plate materials (ductile iron, grey iron, low alloyed steel, and steel with titanium nitrite coating) at different baking parameters (temperature and time) and application of 3 different release agents (different fat compositions). Baking plates from ductile and grey iron showed lower release properties of waffles than the 2 steel baking plates. Baking parameters had to be high enough to allow rapid product crust formation but prevent burning, which again increases sticking behavior. Release agents based on short-chain fatty acids with higher degree of saturation provided better release behavior of waffles than those based on long-chain fatty acids or on emulsifier-acid combinations. Baking plates with increased hardness, good heat storage capacity, and smooth surface seemed to be best suitable. Further research on appropriate coating material might be promising for future. © 2016 Institute of Food Technologists®.

Effects of variable sticking coefficients on the stability of reactive sputtering process

International Nuclear Information System (INIS)

Li Chuan; Hsieh Janghsing

2004-01-01

In reactive sputtering, the introduction of a reactive gas can lead to a hysteresis transition from metal to compounds in both the target and substrate. The hysteresis transition is characterized by a sudden change in partial pressure, sputtering rate, fraction of compound formation, etc. Therefore, stability is an important issue in the process control. In this paper, a mathematical model with variable sticking coefficients based on surface kinetics is used to study the stability of the process. The variable sticking coefficient represents different mechanisms for surface reactions from the Langmuir to precursor type. In order to facilitate the analysis, several nondimensional parameters are identified and used for formulation. Results show that an unsteady system converges to a steady state relatively fast at low inflow rates. With an eigenvalue analysis, the range of positive eigenvalues is consistent with the presence of a hysteresis loop. It is also found that when the chemical reaction on the substrate is moderate, a higher sputter yield of the compound leads to a more stable steady state at lower inflow rates. Regarding the sticking mechanism, for the type of precursors with the parameter k < 1, the compound is easier to form and saturate on the surface due to the higher default sticking coefficient and the lower operating conditions for the hysteresis transition

The Los Alamos Gap Stick Test

Science.gov (United States)

Preston, Daniel; Hill, Larry; Johnson, Carl

2015-06-01

In this paper we describe a novel shock sensitivity test, the Gap Stick Test, which is a generalized variant of the ubiquitous Gap Test. Despite the popularity of the Gap Test, it has some disadvantages: multiple tests must be fired to obtain a single metric, and many tests must be fired to obtain its value to high precision and confidence. Our solution is a test wherein multiple gap tests are joined in series to form a rate stick. The complex re-initiation character of the traditional gap test is thereby retained, but the propagation speed is steady when measured at periodic intervals, and initiation delay in individual segments acts to decrement the average speed. We measure the shock arrival time before and after each inert gap, and compute the average detonation speed through the HE alone (discounting the gap thicknesses). We perform tests for a range of gap thicknesses. We then plot the aforementioned propagation speed as a function of gap thickness. The resulting curve has the same basic structure as a Diameter Effect (DE) curve, and (like the DE curve) terminates at a failure point. Comparison between experiment and hydrocode calculations using ALE3D and the Ignition and Growth reactive burn model calibrated for short duration shock inputs in PBX 9501 is discussed.

Effect of the improving teaching method on the prevention of needle stick injuries in the department of infectious disease

Directory of Open Access Journals (Sweden)

Yi CHEN

2014-11-01

Full Text Available Objective: To discuss the effect of improving teaching method and strengthening the training of occupational protection on the prevention of needle stick injuries in the department of infectious disease. Methods: Collect 17 cases of needle stick injuries that occurred in 2012 among 178 nurses in department of infectious disease. The same cases occurred in 2013 when the nurses had received the occupational protection training and targeted countermeasures were also collected. Results: The incidence of needle stick injuries was 9.55% in infectious department in 2012, and it is down to 3.4% in 2013. Conclusion: Nursing students are more likely to cause needle stick injuries. Training of occupational protection together with nursing technical operation specification can effectively control the occurrence of needle stick injuries.

Measuring sticking and stripping in muon catalyzed dt fusion with multilayer thin films

International Nuclear Information System (INIS)

Fujiwara, M.C.; Bailey, J.M.; Beer, G.A.

1995-12-01

The authors propose a direct measurement of muon sticking to alpha particles in muon catalyzed dt fusion at a high density. Exploiting the features of a multilayer thin film target developed at TRIUMF, the sticking is determined directly by detection of charged fusion products. Experimental separation of initial ticking and stripping may become possible for the first time. Monte Carlo simulations, as well as preliminary results of test measurements are described

Prediction of Seismic Slope Displacements by Dynamic Stick-Slip Analyses

International Nuclear Information System (INIS)

Ausilio, Ernesto; Costanzo, Antonio; Silvestri, Francesco; Tropeano, Giuseppe

2008-01-01

A good-working balance between simplicity and reliability in assessing seismic slope stability is represented by displacement-based methods, in which the effects of deformability and ductility can be either decoupled or coupled in the dynamic analyses. In this paper, a 1D lumped mass ''stick-slip'' model is developed, accounting for soil heterogeneity and non-linear behaviour, with a base sliding mechanism at a potential rupture surface. The results of the preliminary calibration show a good agreement with frequency-domain site response analysis in no-slip conditions. The comparison with rigid sliding block analyses and with the decoupled approach proves that the stick-slip procedure can result increasingly unconservative for soft soils and deep sliding depths

Ballasting pipeline moving in horizontal well as method of control sticking phenomenon

Science.gov (United States)

Toropov, V. S.; Toropov, E. S.

2018-05-01

The mechanism of the phenomenon of sticking a pipeline moving in a well while pulled by the facility horizontal directional drilling is investigated. A quantitative evaluation of the force arising from sticking is given. At the same time, the working hypothesis takes a view of the combined effect of adhesion and friction interactions as the reasons that cause this phenomenon. As a measure to control the occurrence of sticking and to reduce the resistance force to movement of the pipeline in the well, several methods of ballasting the working pipeline are proposed, depending on the profile of the well and the ratio of the length of the curved sections of the inlet and outlet and the straight horizontal sections of the profile. It is shown that for crossings, which profile contains an extended horizontal section, it is possible to partially fill the pipeline with water to achieve zero buoyancy, and for crossings with curvature along the entire profile, the ballasting efficiency will be minimal.

Inertial and stick-slip regimes of unstable adhesive tape peeling.

Science.gov (United States)

Dalbe, Marie-Julie; Villey, Richard; Ciccotti, Matteo; Santucci, Stéphane; Cortet, Pierre-Philippe; Vanel, Loïc

2016-05-18

We present an experimental characterization of the detachment front unstable dynamics observed during the peeling of pressure sensitive adhesives. We use an experimental set-up specifically designed to control the peeling angle θ and the peeled tape length L, while peeling an adhesive tape from a flat substrate at a constant driving velocity V. High-speed imaging allows us to report the evolution of the period and amplitude of the front oscillations, as well as the relative durations of their fast and slow phases, as a function of the control parameters V, L and θ. Our study shows that, as the driving velocity or the peeling angle increases, the oscillations of the peeling front progressively evolve from genuine "stick-slip" oscillations, made of alternating long stick phases and very brief slip phases, to sinusoidal oscillations of amplitude twice the peeling velocity. We propose a model which, taking into account the peeling angle-dependent kinetic energy cost to accelerate and decelerate the peeled tape, explains the transition from the "stick-slip" to the "inertial" regime of the dynamical instability. Using independent direct measurements of the effective fracture energy of the adhesive-substrate joint, we show that our model quantitatively accounts for the two regimes of the unstable dynamics.

Moxa-stick suffumigation for disinfecting air in hematology and hematopoietic stem cell transplantation wards with class 100 laminar flow.

Science.gov (United States)

He, Jing-song; Yang, Qing; Huang, Wei-jia; Hu, Xiao-rong

2014-04-01

To evaluate the effect of moxa-stick suffumigation in the hematology and hematopoietic stem cell transplantation (HSCT) wards with luminar flow. The plate exposure method was used to measure the effect of air-disinfection of moxa-stick suffumigation in hematology and HSCT wards. The yearly average qualified rates of air sampling in HSCT wards were evaluated from 2007 to 2010. To further investigate the disinfecting effect of moxa-stick suffumigation, the colony counts of common pathogens (including Staphylcoccus aureus and Pseudomonas aeruginosa) before and after moxa-stick suffumigation were compared. The mean air quality rates of the HSCT wards with class 100 laminar flow were all above 90.0% (91.2%-96.2%) from 2007 to 2010. Moxa-stick suffumigation effectively decreased the presence of bacteria in the hematology ward's air (Pplates exposed to air treated with moxa-stick suffumigation (77.1±52.9 cfu/m(2) vs 196.1±87.5 cfu/m(2), P<0.01; and 100.2±35.3 cfu/m(2) vs 371.5±35.3 cfu/m(2), P<0.01). Moxa-stick suffumigation proved to be a reliable and effective airdisinfection method for hematology and HSCT wards, and hence, it should be employed extensively.

Hypothenar hammer syndrome from ice hockey stick-handling.

Science.gov (United States)

Zayed, Mohamed A; McDonald, Joey; Tittley, Jacques G

2013-11-01

Ulnar artery thrombosis and hypothenar hammer syndrome are rare vascular complications that could potentially occur with repeated blows or trauma to the hand. Although initially reported as an occupational hazard among laborers and craftsmen, it has been observed more recently among recreationalists and athletes. Until now, it has never been reported as a complication in ice hockey players. In this case report, a 26-year-old Canadian professional ice hockey player presented with acute dominant right hand paleness, coolness, and pain with hand use. The patient used a wooden hockey stick with a large knob of tape at the end of the handle, which he regularly gripped in the palm of his right hand to help with face-offs and general stick-handling. Sonographic evaluation demonstrated no arterial flow in the distal right ulnar artery distribution, and ulnar artery occlusion with no aneurysmal degeneration was confirmed by magnetic resonance angiogram. Intraarterial thrombolytic therapy was initiated, and subsequent serial angiograms demonstrated significant improvement in distal ulnar artery flow as well as recanalization of right hand deep palmar arch and digital arteries. The patient's symptoms resolved, and he was maintained on therapeutic anticoagulation for 3 months prior to returning to playing ice hockey professionally, but with a padded glove and no tape knob at the handle tip. This case highlights a unique presentation of hockey stick-handling causing ulnar artery thrombosis that was likely from repeated palmar hypothenar trauma. Appropriate diagnostic imaging, early intraarterial thrombolysis, and postoperative surveillance and follow-up were crucial for the successful outcome in this patient. Copyright © 2013 Elsevier Inc. All rights reserved.

Cultural Adaptation of the Portuguese Version of the "Sniffin' Sticks" Smell Test: Reliability, Validity, and Normative Data.

Science.gov (United States)

Ribeiro, João Carlos; Simões, João; Silva, Filipe; Silva, Eduardo D; Hummel, Cornelia; Hummel, Thomas; Paiva, António

2016-01-01

The cross-cultural adaptation and validation of the Sniffin`Sticks test for the Portuguese population is described. Over 270 people participated in four experiments. In Experiment 1, 67 participants rated the familiarity of presented odors and seven descriptors of the original test were adapted to a Portuguese context. In Experiment 2, the Portuguese version of Sniffin`Sticks test was administered to 203 healthy participants. Older age, male gender and active smoking status were confirmed as confounding factors. The third experiment showed the validity of the Portuguese version of Sniffin`Sticks test in discriminating healthy controls from patients with olfactory dysfunction. In Experiment 4, the test-retest reliability for both the composite score (r71 = 0.86) and the identification test (r71 = 0.62) was established (pPortuguese version of Sniffin`Sticks test is provided, showing good validity and reliability and effectively distinguishing patients from healthy controls with high sensitivity and specificity. The Portuguese version of Sniffin`Sticks test identification test is a clinically suitable screening tool in routine outpatient Portuguese settings.

Slip-stick excitation and travelling waves excite silo honking

Science.gov (United States)

Warburton, Katarzyna; Porte, Elze; Vriend, Nathalie

2017-06-01

Silo honking is the harmonic sound generated by the discharge of a silo filled with a granular material. In industrial storage silos, the acoustic emission during discharge of PET-particles forms a nuisance for the environment and may ultimately result in structural failure. This work investigates the phenomenon experimentally using a laboratory-scale silo, and successfully correlates the frequency of the emitted sound with the periodicity of the mechanical motion of the grains. The key driver is the slip-stick interaction between the wall and the particles, characterized as a wave moving upwards through the silo. A quantitative correlation is established for the first time between the frequency of the sound, measured with an electret microphone, and the slip-frequency, measured with a high-speed camera. In the lower regions of the tube, both the slip-stick motion and the honking sound disappear.

A geophone wireless sensor network for investigating glacier stick-slip motion

Science.gov (United States)

Martinez, Kirk; Hart, Jane K.; Basford, Philip J.; Bragg, Graeme M.; Ward, Tyler; Young, David S.

2017-08-01

We have developed an innovative passive borehole geophone system, as part of a wireless environmental sensor network to investigate glacier stick-slip motion. The new geophone nodes use an ARM Cortex-M3 processor with a low power design capable of running on battery power while embedded in the ice. Only data from seismic events was stored, held temporarily on a micro-SD card until they were retrieved by systems on the glacier surface which are connected to the internet. The sampling rates, detection and filtering levels were determined from a field trial using a standard commercial passive seismic system. The new system was installed on the Skalafellsjökull glacier in Iceland and provided encouraging results. The results showed that there was a relationship between surface melt water production and seismic event (ice quakes), and these occurred on a pattern related to the glacier surface melt-water controlled velocity changes (stick-slip motion). Three types of seismic events were identified, which were interpreted to reflect a pattern of till deformation (Type A), basal sliding (Type B) and hydraulic transience (Type C) associated with stick-slip motion.

Stick-slip chaos in a mechanical oscillator with dry friction

Science.gov (United States)

Kousaka, Takuji; Asahara, Hiroyuki; Inaba, Naohiko

2018-03-01

This study analyzes a forced mechanical dynamical system with dry friction that can generate chaotic stick-slip vibrations. We find that the dynamics proposed by Yoshitake et al. [Trans. Jpn. Soc. Mech. Eng. C 61, 768 (1995)] can be expressed as a nonautonomous constraint differential equation owing to the static friction force. The object is constrained to the surface of a moving belt by a static friction force from when it sticks to the surface until the force on the object exceeds the maximal static friction force. We derive a 1D Poincaré return map from the constrained mechanical system, and prove numerically that this 1D map has an absolutely continuous invariant measure and a positive Lyapunov exponent, providing strong evidence for chaos.

R.E.A.C.H. to Teach: Making Patient and Family Education "Stick".

Science.gov (United States)

Cutilli, Carolyn Crane

2016-01-01

Healthcare professionals teach patients and families about their health every day. Regulatory and accreditation organizations mandate patient and family education to promote better health outcomes. And recently, financial rewards for healthcare organizations are being tied to patient satisfaction (Hospital Consumer Assessment of Healthcare Providers and Systems-HCAHPS). A University of Pennsylvania Health System group of staff and patients, devoted to excellence in patient and family education, developed the graphic "R.E.A.C.H. to Teach." The purpose of the graphic is to make evidence-based practice (EBP) for patient and family education "stick" with staff. The group used concepts from the marketing book, Made to Stick, to demonstrate how to develop effective staff and patient and family education. Ideas (education) that survive ("stick") have the following attributes: simple, unexpected, concrete, credible, emotional, and narrative (story). This article demonstrates how to apply these principles and EBP to patient and family education.

Short stick exercises for fall prevention among older adults: a cluster randomized trial.

Science.gov (United States)

Yokoi, Katsushi; Yoshimasu, Kouichi; Takemura, Shigeki; Fukumoto, Jin; Kurasawa, Shigeki; Miyashita, Kazuhisa

2015-01-01

To investigate the effects of short stick exercise (SSEs) on fall prevention and improvement of physical function in older adults. A cluster randomized trial was conducted in five residential care facilities. The intervention group (n = 51) practiced SSEs for six months, followed by routine care for six more months. The control group (n = 54) received ordinary care for 12 months. The primary outcome measure was the number of fallers, taking into account the time to first fall using the Kaplan-Meier method. The secondary outcome measures were physical and mental functions. The number of fallers was significantly lower in the intervention group (n = 6) than in the control group (n = 16) during the 12 months. The adjusted hazard ratio for a first fall in the intervention group compared with the control group was 0.15 (CI, 0.03 to 0.74, p = 0.02). The fall-free period was significantly longer in the intervention group than in controls (mean ± SD, 10.1 ± 3.0 versus 9.0 ± 4.1 months, p = 0.027). The functional reach and sit and reach tests were significantly improved at three and six months. The SSEs appeared effective for fall prevention and improvement of physical function in older adults. Implications for Rehabilitation The newly developed short stick exercises appear an effective means of reducing falls among older adults in residential care facilities. The short stick exercises seem to have an immediate effect on improving physical functions. Effects gained by performing the short stick exercises, such as static balance, flexibility and agility may last for six months. The short stick exercises were found to be easy for older adults to practice continuously in residential care facilities.

Investigation of PDC bit failure base on stick-slip vibration analysis of drilling string system plus drill bit

Science.gov (United States)

Huang, Zhiqiang; Xie, Dou; Xie, Bing; Zhang, Wenlin; Zhang, Fuxiao; He, Lei

2018-03-01

The undesired stick-slip vibration is the main source of PDC bit failure, such as tooth fracture and tooth loss. So, the study of PDC bit failure base on stick-slip vibration analysis is crucial to prolonging the service life of PDC bit and improving ROP (rate of penetration). For this purpose, a piecewise-smooth torsional model with 4-DOF (degree of freedom) of drilling string system plus PDC bit is proposed to simulate non-impact drilling. In this model, both the friction and cutting behaviors of PDC bit are innovatively introduced. The results reveal that PDC bit is easier to fail than other drilling tools due to the severer stick-slip vibration. Moreover, reducing WOB (weight on bit) and improving driving torque can effectively mitigate the stick-slip vibration of PDC bit. Therefore, PDC bit failure can be alleviated by optimizing drilling parameters. In addition, a new 4-DOF torsional model is established to simulate torsional impact drilling and the effect of torsional impact on PDC bit's stick-slip vibration is analyzed by use of an engineering example. It can be concluded that torsional impact can mitigate stick-slip vibration, prolonging the service life of PDC bit and improving drilling efficiency, which is consistent with the field experiment results.

Neutral Evolution of Duplicated DNA: An Evolutionary Stick-Breaking Process Causes Scale-Invariant Behavior

Science.gov (United States)

Massip, Florian; Arndt, Peter F.

2013-04-01

Recently, an enrichment of identical matching sequences has been found in many eukaryotic genomes. Their length distribution exhibits a power law tail raising the question of what evolutionary mechanism or functional constraints would be able to shape this distribution. Here we introduce a simple and evolutionarily neutral model, which involves only point mutations and segmental duplications, and produces the same statistical features as observed for genomic data. Further, we extend a mathematical model for random stick breaking to analytically show that the exponent of the power law tail is -3 and universal as it does not depend on the microscopic details of the model.

Development of low energy electron beam irradiation techniques. Application to sticking adhesive

International Nuclear Information System (INIS)

Ito, Hisashi; Enomoto, Ichiro

1997-01-01

Sticking adhesives were developed by use of blend with electron beam crosslinked type stylene - isoprene block copolymer (SIS) as a basic component. The sticking adhesive has object to change from sticking to adhesion and peeling by irradiation. SIS was blended with reactive monomer and resins or alicyclic hydrocarbon as tackifier and investigated. The results showed change of peel force by irradiation was influenced by compatibility, composition and the quality of objective materials. SIS such as Kraton D1320X (Shell Co. Ltd.) and tackifier such as rosin (ROSIN) and arcone P100 (ARP) were used at the basic ratio SIS/tackifier=64. Modified urethane acrylate (UA306H), isobornyl acrylate (IBXA), epoxy ester (3002M), lauryl methacrylate (LM) and lauryl acrylate (LA) were used as monomer. The large changes of peel force were observed by blends with UA306H or 3002M of which properties were incompatibility. These results indicated that we made possible to control the peel force by irradiation by means of adding the specific incompatibility monomer to the mixture of SIS and tackifier. (S.Y.)

Slip-stick excitation and travelling waves excite silo honking

Directory of Open Access Journals (Sweden)

Warburton Katarzyna

2017-01-01

Full Text Available Silo honking is the harmonic sound generated by the discharge of a silo filled with a granular material. In industrial storage silos, the acoustic emission during discharge of PET-particles forms a nuisance for the environment and may ultimately result in structural failure. This work investigates the phenomenon experimentally using a laboratory-scale silo, and successfully correlates the frequency of the emitted sound with the periodicity of the mechanical motion of the grains. The key driver is the slip-stick interaction between the wall and the particles, characterized as a wave moving upwards through the silo. A quantitative correlation is established for the first time between the frequency of the sound, measured with an electret microphone, and the slip-frequency, measured with a high-speed camera. In the lower regions of the tube, both the slip-stick motion and the honking sound disappear.

Cigarette stick as valuable communicative real estate: a content analysis of cigarettes from 14 low-income and middle-income countries.

Science.gov (United States)

C Smith, Katherine; Washington, Carmen; Welding, Kevin; Kroart, Laura; Osho, Adami; Cohen, Joanna E

2016-09-01

The current cigarette market is heavily focused on low-income and middle-income countries. Branding of tobacco products is key to establishing and maintaining a customer base. Greater restrictions on marketing and advertising of tobacco products create an incentive for companies to focus more on branding via the product itself. We consider how tobacco sticks are used for communicative purposes in 14 low-income and middle-income countries with extensive tobacco markets. In 2013, we collected and coded 3232 cigarette and kretek packs that were purchased from vendors in diverse neighbourhoods in 44 cities across the 14 low-income and middle-income countries with the greatest number of smokers. A single stick from each pack was assessed for branding, decorative and communicative elements using a common coding framework. Stick communication variables included brand name, brand image/logo, brand descriptor, colour and design carried through from pack, 'capsule cigarette' symbol, and embellishment of filter end. Communication and branding on the stick is essentially ubiquitous (99.75%); 97% of sticks include explicit branding (brand name or logo present). Colour is commonly carried through from the pack (95%), and some sticks (13%) include decorative elements matching the pack. Decorative elements can be found anywhere on the stick, including the filter tip (8%), and 'convertible' cigarettes include a symbol to show where to push. Cigarette sticks are clearly valuable 'real estate' that tobacco companies are using for communicative purposes. Across all countries and brands, the stick communicates branding via text, colour and imagery. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

A study of needle stick injuries among non-consultant hospital doctors in Ireland.

LENUS (Irish Health Repository)

O'Connor, M B

2012-02-01

INTRODUCTION: NCHDs are exposed to a great number of blood-borne infections. Needle stick injuries are possibly the main route of acquiring such infections from a non-consultant hospital doctors (NCHDs) perspective. This study examines NCHDs experiences surrounding needle stick injuries. METHODS: A cross-sectional self-administered anonymous questionnaire survey was conducted on 185 NCHDs working in a clinical setting among seven teaching hospitals in Ireland. Implied consent was obtained. The data was analysed using Excel spreadsheets. Ethical approval was received. RESULTS: A response rate of 85.4% (158\\/185) was achieved. Findings of the study are shown in the manuscript table. CONCLUSIONS: A needle stick injury (NI) history is greater among surgical NCHDs than medical NCHDs. The level of disposable glove usage is worryingly poor. Training in sharps handling and dealing with a NI needs to be addressed. HIV is the blood-borne infection most fear of being contracting as a consequence of a NI.

Sustained frictional instabilities on nanodomed surfaces: Stick-slip amplitude coefficient

DEFF Research Database (Denmark)

Quignon, Benoit; Pilkington, Georgia A.; Thormann, Esben

2013-01-01

to sustained frictional instabilities, effectively with no contact frictional sliding. The amplitude of the stick-slip oscillations, σf, was found to correlate with the topographic properties of the surfaces and scale linearly with the applied load. In line with the friction coefficient, we define the slope......-defined nanodomes comprising densely packed prolate spheroids, of diameters ranging from tens to hundreds of nanometers. Our results show that the average lateral force varied linearly with applied load, as described by Amontons' first law of friction, although no direct correlation between the sample topographic...... properties and their measured friction coefficients was identified. Furthermore, all the nanodomed textures exhibited pronounced oscillations in the shear traces, similar to the classic stick-slip behavior, under all the shear velocities and load regimes studied. That is, the nanotextured topography led...

On the stick-slip vibration in the suspension of a freight wagon

Directory of Open Access Journals (Sweden)

Mazilu Traian

2017-01-01

Full Text Available Damping based on the dry friction is frequently in suspensions of the freight wagons. The paper presents some aspects of vertical vibration of freight wagons. It uses a simple model considering that the vehicle was reduced to a mass suspended on a wheel, moving at constant speed on a rigid track with harmonic irregularity. Stick-slip vibration can occur due to the friction and it is characterized by sudden changes in the wheel acceleration affecting the ride quality. The paper shows the influence of stick-slip vibration on the wheel-rail dynamic force.

New non-stick expoxy-silicone water-based coatings part 1: Physical and surface properties

Energy Technology Data Exchange (ETDEWEB)

Garti, N. [Hebrew Univ. of Jerusalem (Israel); Smith, J. [Decora Manufacturing, Fort Edward, NY (United States)

1995-06-01

In search for tomorrow`s technology for water-based coating, Decora Manufacturing and The Hebrew University of Jerusalem, have initiated an intensive research program for designing, developing and manufacturing new coatings based on cross-linked, room temperature-cured silicone-expoxy resins. The new water-borne coatings have most exciting characteristics such as: non-stick properties, effective release, high lubricity, corrosion protection and abrasion resistance. The coatings are environmentally-friendly and easy to use. These coatings are ideal for marine, agricultural, industrial and maintenance applications. This paper brings quantitative measurements related to the dispersion technology (particle size, stability, shelf-life), to the non-stick properties (deicing, low surface energy, easy-release and non-stick), lubricity, adhesion to substrates, viscosity, dynamic and static friction coefficients and environmental impact (low VOC, non-toxicity, low-leaching). The coating was tested in various industrial coating systems and was found to exhibit excellent non-stick and release properties. Special attention was given to Zebra Mussels, Quagga Mussels and other bacterial and algeal bioforms. The coating proved to be efficient as foul-release coating with very low biofouling adhesion. The low adhesion applied to many other substances in which foul-release means easy-clean and low-wear.

Low Velocity Seismic Waves Produced by Stick-Slip Processes During the Drainage of Two Supraglacial Lakes in Greenland

Science.gov (United States)

Kenyon, P. M.; Orantes, E. J.; Grynewize, S.; Tedesco, M.

2016-12-01

The drainage of supraglacial lakes over the Greenland ice sheet has been shown to have a significant impact on ice dynamics and subglacial hydrology. As supraglacial lakes drain, they produce seismic waves that can be detected on both local and regional scales. Studying such waves and the originating phenomena has the potential to advance our understanding of the subglacial processes involved. Here we present the results of an analysis of high frequency seismic waves generated during the drainage of two supraglacial lakes in southwestern Greenland. The two lakes drained by contrasting mechanisms. One (Lake Half Moon) drained slowly by overflow into an existing moulin. Here GPS data, recorded during the drainage, show an increase in ice sheet velocity that begins well before the time of maximum lake depth. The other lake (Lake Ponting) drained suddenly by hydrofracture through the lake bed. In this case, the GPS data show an increase in velocity that is essentially simultaneous with the maximum lake depth. In both cases, vertical component seismograms were obtained from the Greenland Ice Sheet Monitoring Network (GLISN) for several hours before and after the lake drainage. Arrival times were picked manually, using the criterion that an arrival must have a minimum amplitude of twice the noise level. The arrivals were then plotted on graphs of time versus distance from the lake in question. Several linear trends are visible on each graph. The velocities calculated from the slopes of these trends are unexpectedly low. We suggest that one explanation for this might be that the waves are traveling in a layer of till at the base of the ice sheet, that forms a low velocity channel. When compared with GPS and lake depth data, the origin times of the waves coincide with the velocity increase in both cases. Therefore, we conclude that the waves are being generated by stick-slip processes involving the slippage of the ice sheet on an underlying layer of till.

IE Information Notice No. 85-17, Supplement 1: Possible sticking of ASCO solenoid valves

International Nuclear Information System (INIS)

Jordan, E.L.

1992-01-01

This notice is to inform recipients of the results of follow up investigations regarding the reasons for sticking of Automatic Switch Company (ASCO) solenoid valves used to shut main steam isolation valves (MSIVs) under accident conditions. GE has recommend that the licensee replace the potentially contaminated MSIV solenoid valves and institute a periodic examination and cleaning of the MSIV solenoid valves. Grand Gulf has replaced the eight MSIV HTX832320V dual solenoid valves with fully environmentally qualified ASCO Model NP 8323A20E dual solenoid valves. The environmentally qualified valve Model NP 8323A20E was included in a control sample placed in the test ovens with the solenoid valves that stuck at Grand Gulf. The environmentally qualified model did not stick under the test conditions that cause sticking in the other solenoid valves

The influence of testing apparatus stiffness on the source properties of laboratory stick-slip

Science.gov (United States)

Kilgore, B. D.; McGarr, A.; Beeler, N. M.; Lockner, D. A.

2016-12-01

Stick-slip experiments were performed to determine the influence of the testing apparatus stiffness on source properties, to develop methods to relate stick-slip to natural earthquakes, and to examine the hypothesis of McGarr [2012] that the product of unloading stiffness, k, and slip duration, T, is both scale-independent and approximately constant for both laboratory and natural earthquakes. A double-direct shear load frame was used with Sierra White Granite samples at 2 MPa normal stress, and a remote loading rate of 0.2 µm/s. The stiffness of the test apparatus was varied by more than an order of magnitude by inserting disk springs into the shear loading column adjacent to the granite samples. Servo-controlling slip at a point between the forcing ram and the shear force load cell, produced repeatable slip events. Slip and slip duration decrease as k increases, as they do for natural earthquakes. In contrast to earthquakes, stress drop and slip rate decrease with increasing k, and the product kT for these experiments is not constant, but decreases with k. These data, collected over a range of k, do not conform to McGarr's [2012] hypothesis. However, analysis of stick-slip studies from other testing apparatuses is consistent with McGarr's hypothesis; kT is scale-independent, similar to that of earthquakes, equal to the ratio of static stress drop to average slip velocity, and similar to the ratio of shear modulus to wavespeed of rock. These properties result from conducting experiments over a range of sample sizes, using rock samples with the same elastic properties as the Earth, and using testing machines whose stiffnesses decrease, and characteristic periods increase with scale. A consequence of our experiments and analysis is that extrapolation of lab scale earthquake source properties to the Earth is more difficult than previously thought, requiring an accounting for the properties of the testing machines and additional research beyond that reported here.

Wooden Calendar Sticks in Eastern Europe

Science.gov (United States)

Koleva, Vesselina; Koleva, Svetlana

Wooden calendar sticks have preserved an archaic time-keeping tradition, which, during the Middle Ages, was one of the tools for establishing and disseminating Christian chronology and the liturgical calendars of the Western and Eastern Churches. The calendars vary in size and shape, type of signs, and structure of the record. Christian symbols interwoven with signs and pictograms mark days of importance in the ritual and economic year cycle. The wooden calendars are considered one of the proofs of the syncretism between the pagan tradition and Christian rites in folk cultures.

Styrofoam-and-Velcro: An Alternative to Ball-and-Stick Models

Directory of Open Access Journals (Sweden)

Sawyer Rowan Masonjones

2014-07-01

Full Text Available For students learning biology at introductory levels, one of the most significant instructional barriers is their lack of preparation in chemistry. In upper-division college chemistry and biology courses, students employ ball-and-stick models in order to visualize molecular structures, but at the introductory biology level, models are inconsistently used and at the secondary level they are avoided altogether. Traditional ball-and-stick models perform poorly at all levels because they only show bonds, never valence electrons. This poses a problem for students who are visual or kinesthetic learners, as modeling electrons in the bonding process may be critical to understanding the mechanisms behind the biochemical reactions that serve as a foundation for biological concepts. Our molecular modeling kits show the action of valence electrons and correctly deal with the issue of polarity and partial charge, while still illustrating structure and function similarly to ball-and-stick models, allowing students to model nearly every reaction or molecule they may need to learn.  Additionally, this kit will foster model building exercises required as part of the Next Generation Science Standards (http://www.nextgenscience.org/next-generation-science-standards. This model was devloped in conjunction with 'Molecular Twister: A Game for Exploring Solution Chemistry' (JMBE Vol 15, No 1; http://jmbe.asm.org/index.php/jmbe/article/view/652 by the same authors, which uses principles derived from the present paper.

On the formation of limit cycle of the friction-induced stick-slip vibration in oilwell drillstring

Directory of Open Access Journals (Sweden)

Xiaohua Zhu

2015-03-01

Full Text Available In this paper, the stick-slip vibration in oilwell drillstring is studied. The drilling system is modelled as a lumped-parameter torsional pendulum and the interaction between the drill bit and the rock is treated as Coulomb friction. Equation of motion of the drill bit is established and the dynamic responses of the drill bit are obtained. A drilling system with the drillstring length 3000 m is analysed, in which the system parameters are selected by reference to the actual drilling situation. After the slip vibrations in the initial stage, final state of the drill bit is a stable stick-slip vibration of which the limit cycle is a closed loop. In order to find the stability of the limit cycle corresponds to the periodically stick-slip vibration, different initial conditions for the drill bit are studied. Results show that the drill bit will lead to a periodic motion and the phase trajectories ultimately converge to the same limit cycle corresponds to stable stick-slip vibration.

Impact of subject related factors and position of flight control stick on acquisition of simulated flying skills using a flight simulator

Science.gov (United States)

Cho, Bo-Keun

Increasing demand on aviation industry calls for more pilots. Thus, pilot training systems and pilot-candidate screening systems are essential for civil and military flying training institutes. Before actual flight training, it is not easy to determine whether a flight trainee will be successful in the training. Due to the high cost of actual flight training, it would be better if there were low cost methods for screening and training candidates prior to the actual flight training. This study intended to determine if subject related factors and flight control stick position have an impact on acquisition of simulated flying skills using a PC-based flight simulator. The experimental model was a factorial design with repeated measures. Sixty-four subjects participated in the experiment and were divided into 8 groups. Experiment consisted of 8 sessions in which performance data, such as heading, altitude and airspeed were collected every 15 seconds. Collected data were analyzed using SAS statistical program. Result of multivariate analysis of variance indicated that the three independent variables: nationality, computer game experience, and flight stick position have significant impact on acquiring simulated flying skill. For nationality, Americans recorded higher scores in general (mean: 81.7) than Koreans (mean: 78.9). The difference in mean scores between Americans and Koreans was 2.8 percent. Regarding computer game experience, the difference between high experience group (82.3) and low experience group (78.3) is significant. For high experience group, American side-stick group recorded the highest (mean: 85.6), and Korean side-stick group (mean: 77.2) scored the lowest. For the low experience group, American center-stick group scored the highest (80.6), and the Korean side-stick group (74.2) scored the lowest points. Therefore, there is a significant difference between high experience group and low experience group. The results also reveal that the center-stick

The Rise of Carrots and the Decline of Sticks

NARCIS (Netherlands)

de Geest, G.; Dari-Mattiacci, G.

2013-01-01

There is a remarkable tendency in modern legal systems to increasingly use carrots. This trend is not limited to legal systems but can also be observed in, for instance, parenting styles, social control mechanisms, and even law schools’ teaching methods. Yet, at first glance, sticks appear to be a

The hockey-stick method to estimate evening dim light melatonin onset (DLMO) in humans.

Science.gov (United States)

Danilenko, Konstantin V; Verevkin, Evgeniy G; Antyufeev, Viktor S; Wirz-Justice, Anna; Cajochen, Christian

2014-04-01

The onset of melatonin secretion in the evening is the most reliable and most widely used index of circadian timing in humans. Saliva (or plasma) is usually sampled every 0.5-1 hours under dim-light conditions in the evening 5-6 hours before usual bedtime to assess the dim-light melatonin onset (DLMO). For many years, attempts have been made to find a reliable objective determination of melatonin onset time either by fixed or dynamic threshold approaches. The here-developed hockey-stick algorithm, used as an interactive computer-based approach, fits the evening melatonin profile by a piecewise linear-parabolic function represented as a straight line switching to the branch of a parabola. The switch point is considered to reliably estimate melatonin rise time. We applied the hockey-stick method to 109 half-hourly melatonin profiles to assess the DLMOs and compared these estimates to visual ratings from three experts in the field. The DLMOs of 103 profiles were considered to be clearly quantifiable. The hockey-stick DLMO estimates were on average 4 minutes earlier than the experts' estimates, with a range of -27 to +13 minutes; in 47% of the cases the difference fell within ±5 minutes, in 98% within -20 to +13 minutes. The raters' and hockey-stick estimates showed poor accordance with DLMOs defined by threshold methods. Thus, the hockey-stick algorithm is a reliable objective method to estimate melatonin rise time, which does not depend on a threshold value and is free from errors arising from differences in subjective circadian phase estimates. The method is available as a computerized program that can be easily used in research settings and clinical practice either for salivary or plasma melatonin values.

Implications of basal micro-earthquakes and tremor for ice stream mechanics: Stick-slip basal sliding and till erosion

Science.gov (United States)

Barcheck, C. Grace; Tulaczyk, Slawek; Schwartz, Susan Y.; Walter, Jacob I.; Winberry, J. Paul

2018-03-01

The Whillans Ice Plain (WIP) is unique among Antarctic ice streams because it moves by stick-slip. The conditions allowing stick-slip and its importance in controlling ice dynamics remain uncertain. Local basal seismicity previously observed during unstable slip is a clue to the mechanism of ice stream stick-slip and a window into current basal conditions, but the spatial extent and importance of this basal seismicity are unknown. We analyze data from a 2010-2011 ice-plain-wide seismic and GPS network to show that basal micro-seismicity correlates with large-scale patterns in ice stream slip behavior: Basal seismicity is common where the ice moves the least between unstable slip events, with small discrete basal micro-earthquakes happening within 10s of km of the central stick-slip nucleation area and emergent basal tremor occurring downstream of this area. Basal seismicity is largely absent in surrounding areas, where inter-slip creep rates are high. The large seismically active area suggests that a frictional sliding law that can accommodate stick-slip may be appropriate for ice stream beds on regional scales. Variability in seismic behavior over inter-station distances of 1-10 km indicates heterogeneity in local bed conditions and frictional complexity. WIP unstable slips may nucleate when stick-slip basal earthquake patches fail over a large area. We present a conceptual model in which basal seismicity results from slip-weakening frictional failure of over-consolidated till as it is eroded and mobilized into deforming till.

[Correlation between physical characteristics of sticks and quality of traditional Chinese medicine pills prepared by plastic molded method].

Science.gov (United States)

Wang, Ling; Xian, Jiechen; Hong, Yanlong; Lin, Xiao; Feng, Yi

2012-05-01

To quantify the physical characteristics of sticks of traditional Chinese medicine (TCM) honeyed pills prepared by the plastic molded method and the correlation of adhesiveness and plasticity-related parameters of sticks and quality of pills, in order to find major parameters and the appropriate range impacting pill quality. Sticks were detected by texture analyzer for their physical characteristic parameters such as hardness and compression action, and pills were observed by visual evaluation for their quality. The correlation of both data was determined by the stepwise discriminant analysis. Stick physical characteristic parameter l(CD) can exactly depict the adhesiveness, with the discriminant equation of Y0 - Y1 = 6.415 - 41.594l(CD). When Y0 Y1, pills were adhesive with each other. Pills' physical characteristic parameters l(CD) and l(AC), Ar, Tr can exactly depict smoothness of pills, with the discriminant equation of Z0 - Z1 = -195.318 + 78.79l(AC) - 3 258. 982Ar + 3437.935Tr. When Z0 Z1, pills were rough on surface. The stepwise discriminant analysis is made to show the obvious correlation between key physical characteristic parameters l(CD) and l(AC), Ar, Tr of sticks and appearance quality of pills, defining the molding process for preparing pills by the plastic molded and qualifying ranges of key physical characteristic parameters characterizing intermediate sticks, in order to provide theoretical basis for prescription screening and technical parameter adjustment for pills.

Simple and easy assessment of falling risk in the elderly by functional reach test using elastic stick.

Science.gov (United States)

Demura, Shin-Ichi; Yamada, Takayoshi

2007-10-01

Dynamic balance ability related to maintaining postural stability during movement is closely tied to fall risk in the elderly. The functional reach (FR) test has been developed to evaluate their dynamic balance. Although a simple and new FR test using an elastic stick has been proposed by modifying the above original FR test, the abilities related to both FR tests are judged to differ because of the large difference in the testing method. This study aimed to compare center of gravity fluctuation, muscle activity and functional reach distance as measured by the original FR test and the elastic stick FR test. First, reach distance, back/forth and right/left moving distance of the center of gravity, and activity of the lower leg muscles (soleus and tibialis anterior) were compared between both tests based on data obtained from 30 young male adults. All parameters except for the right/left moving distance were significantly larger in the elastic stick FR test. Next, the reach distance was examined in both FR tests using 53 elderly subjects; it was significantly longer in the elastic stick FR test, but showed no significant sex difference. The reach distance in both tests was significantly shorter (about 7 cm) in the elderly than in young adults. In conclusion, the elastic stick FR test involves greater leg muscle strength exertion and forward transferring of the center of gravity as compared with the original FR test. Because the elastic stick FR test relates largely to leg muscle function and equilibrium function, it may be more useful for evaluating the dynamic balance ability of the elderly.

On a Desert Island with Unit Sticks, Continued Fractions and Lagrange

Directory of Open Access Journals (Sweden)

Victor J. Ricchezza

2016-07-01

Full Text Available GLY 4866, Computational Geology, provides an opportunity, welcomed by our faculty, to teach quantitative literacy to geology majors at USF. The course continues to evolve although the second author has been teaching it for some 20 years. This paper describes our experiences with a new lab activity that we are developing on the core issue of measurement and units. The activity is inspired by a passage in the 2008 publication of lectures that Joseph Louis Lagrange delivered at the Ecole Normale in 1795. The activity envisions that young scientists are faced with the need to determine the dimensions of a rectangle with no measuring device other than an unruled stick of unknown length – to hundredths of a stick length. Following Lagrange, the students use the stick to measure the lengths with continued fractions, and then they reduce the continued fractions and convert them to decimal form. In the process, these student veterans of calculus instruction learn that as a group they are not very good at the arithmetic of fractions, which they thought they learned in the fifth grade. The group score on a continued fraction item improved from 44% on the pre-course test to 84% on the post-course test in the first semester in which the new lab was included (Fall 2015.

A Novel Tactile Sensor with Electromagnetic Induction and Its Application on Stick-Slip Interaction Detection

Directory of Open Access Journals (Sweden)

Yanjie Liu

2016-03-01

Full Text Available Real-time detection of contact states, such as stick-slip interaction between a robot and an object on its end effector, is crucial for the robot to grasp and manipulate the object steadily. This paper presents a novel tactile sensor based on electromagnetic induction and its application on stick-slip interaction. An equivalent cantilever-beam model of the tactile sensor was built and capable of constructing the relationship between the sensor output and the friction applied on the sensor. With the tactile sensor, a new method to detect stick-slip interaction on the contact surface between the object and the sensor is proposed based on the characteristics of friction change. Furthermore, a prototype was developed for a typical application, stable wafer transferring on a wafer transfer robot, by considering the spatial magnetic field distribution and the sensor size according to the requirements of wafer transfer. The experimental results validate the sensing mechanism of the tactile sensor and verify its feasibility of detecting stick-slip on the contact surface between the wafer and the sensor. The sensing mechanism also provides a new approach to detect the contact state on the soft-rigid surface in other robot-environment interaction systems.

A Novel Tactile Sensor with Electromagnetic Induction and Its Application on Stick-Slip Interaction Detection

Science.gov (United States)

Liu, Yanjie; Han, Haijun; Liu, Tao; Yi, Jingang; Li, Qingguo; Inoue, Yoshio

2016-01-01

Real-time detection of contact states, such as stick-slip interaction between a robot and an object on its end effector, is crucial for the robot to grasp and manipulate the object steadily. This paper presents a novel tactile sensor based on electromagnetic induction and its application on stick-slip interaction. An equivalent cantilever-beam model of the tactile sensor was built and capable of constructing the relationship between the sensor output and the friction applied on the sensor. With the tactile sensor, a new method to detect stick-slip interaction on the contact surface between the object and the sensor is proposed based on the characteristics of friction change. Furthermore, a prototype was developed for a typical application, stable wafer transferring on a wafer transfer robot, by considering the spatial magnetic field distribution and the sensor size according to the requirements of wafer transfer. The experimental results validate the sensing mechanism of the tactile sensor and verify its feasibility of detecting stick-slip on the contact surface between the wafer and the sensor. The sensing mechanism also provides a new approach to detect the contact state on the soft-rigid surface in other robot-environment interaction systems. PMID:27023545

Hepatitis B Vaccination Status and Needle stick Injuries among ...

African Journals Online (AJOL)

Background: Hepatits B virus (HBV) is the most common blood borne pathogen that poses an occupational risk to Health-care workers. The incidence of infection following needle stick injury has been reported to be high among medical students. Effective vaccines against HBV are available. The aim of this study was to ...

Studying Hooke's Law by Using a Pogo Stick

Science.gov (United States)

Silva, Nicolas

2011-01-01

Perhaps the pogo stick was little Robert Hooke's favorite childhood toy, consisting of a stiff spring inserted in a tube fixed at the upper end and connected to a moveable rod at the other. Hand grips and a foot rest are connected to the tube. The idea is to jump on it taking advantage of the force provided by the spring when it is compressed.…

TALKING STICK SEBAGAI INOVASI DALAM AKTIVITAS MENGOMUNIKASIKAN UNTUK MENINGKATKAN PEMAHAMAN SISWA

Directory of Open Access Journals (Sweden)

Anak Agung Gede Agung

2017-10-01

Full Text Available Penelitian ini bertujuan untuk mengetahui pengaruh aktivitas mengomunikasikan dalam pendekatan saintifik berbantuan talking stick terhadap dimensi proses kognitif siswa kelas IV tahun pelajaran 2016/2017 di Sd Kabupaten Buleleng.  Penelitian ini merupakan penelitian eksperimen semu dengan populasi seluruh kelompok siswa kelas IV di SD rintisan kurikulum  2013 di Kabupaten buleleng. Sampel penelitian sebanyak dua kelas yang berjumlah 76 siswa. Data dikumpulkan dengan teknik tes serta dianalisis dengan teknik statistik deskriptif dan  inferensial (uji t. Hasil penelitian ini menunjukkan bahwa terdapat perbedaan dimensi proses kognitif yang signifikan antara siswa yang dibelajarkan dengan aktivitas mengomunikasikan dalam pendekatan saintifik berbantuan talking stick dan siswa yang dibelajarkan dengan aktivitas pembelajaran konvensional (thitung = 5,27 > ttabel = 1,99, serta kategori pemahaman dalam dimensi proses kognitif lebih tinggi dari pada kategori lainnya.

Modelling the tuned criticality in stick-slip friction during metal cutting

International Nuclear Information System (INIS)

Wang, Q; Ye, G G; Dai, L H; Lu, C

2015-01-01

Cutting is a ubiquitous process in nature and man-made systems. Here we demonstrate that, based on morphological patterns observed in experiments, the friction behaviour of metal cutting exhibits a criticality with cutting speed as a tuned parameter. The corresponding stick-slip events can be described by a power law distribution. A dynamic thermo-mechanical model is developed to investigate how such a tuned criticality occurs. It is shown that, in terms of the linear stability analysis, stick-slip friction is due to the thermo-mechanical instability and dynamical interaction between shear dissipation and nonlinear friction. Moreover, there is a secondary transition from a criticality state to a limit cycle that is dominated by the inertia effect, which is similar to the frequency lock phenomenon in a forced Duffing oscillator. (paper)

"Fist, Stick, Knife, Gun": Getting Real in Upward Bound.

Science.gov (United States)

Pace, Barbara G.; Adkins, Theresa A.

2002-01-01

Describes how a teacher found literature for Upward Bound students. Presents Geoffrey Canada's "Fist, Stick, Knife, Gun: A Personal History of Violence in America" as a nonfiction work to provide clarity and connections that might not have been available in a fictional work, yet it had elements of literary fiction that made the text…

Relating stick-slip friction experiments to earthquake source parameters

Science.gov (United States)

McGarr, Arthur F.

2012-01-01

Analytical results for parameters, such as static stress drop, for stick-slip friction experiments, with arbitrary input parameters, can be determined by solving an energy-balance equation. These results can then be related to a given earthquake based on its seismic moment and the maximum slip within its rupture zone, assuming that the rupture process entails the same physics as stick-slip friction. This analysis yields overshoots and ratios of apparent stress to static stress drop of about 0.25. The inferred earthquake source parameters static stress drop, apparent stress, slip rate, and radiated energy are robust inasmuch as they are largely independent of the experimental parameters used in their estimation. Instead, these earthquake parameters depend on C, the ratio of maximum slip to the cube root of the seismic moment. C is controlled by the normal stress applied to the rupture plane and the difference between the static and dynamic coefficients of friction. Estimating yield stress and seismic efficiency using the same procedure is only possible when the actual static and dynamic coefficients of friction are known within the earthquake rupture zone.

Non-desired transitions and sliding-mode control of a multi-DOF mechanical system with stick-slip oscillations

International Nuclear Information System (INIS)

Navarro-Lopez, Eva M.; Liceaga-Castro, Eduardo

2009-01-01

Systems with discontinuous elements exhibit a wide variety of complex phenomena which must be considered in the control design process. A dynamical sliding-mode control is used to avoid different bit sticking problems appearing in conventional vertical oilwell drillstrings. The aim of the control system is to drive the rotary velocities of drillstring components to specified values. A discontinuous lumped-parameter torsional model of four degrees of freedom is considered. This model is more generic than those so far reported in the literature. The closed-loop system dynamics have four discontinuity surfaces. One of these surfaces is introduced in order to accomplish the control goal despite variations of key drilling parameters, such as, the weight on the bit, the top-rotary velocity and friction characteristics. Self-excited bit stick-slip oscillations and sticking phenomena are avoided with the controller here proposed. Moreover, an alternative procedure to investigate the stick-slip motion is presented, it is based on the study of the stability characteristics of the different system equilibria and their relationships to different sliding motions.

Stick-slip friction of gecko-mimetic flaps on smooth and rough surfaces.

Science.gov (United States)

Das, Saurabh; Cadirov, Nicholas; Chary, Sathya; Kaufman, Yair; Hogan, Jack; Turner, Kimberly L; Israelachvili, Jacob N

2015-03-06

The discovery and understanding of gecko 'frictional-adhesion' adhering and climbing mechanism has allowed researchers to mimic and create gecko-inspired adhesives. A few experimental and theoretical approaches have been taken to understand the effect of surface roughness on synthetic adhesive performance, and the implications of stick-slip friction during shearing. This work extends previous studies by using a modified surface forces apparatus to quantitatively measure and model frictional forces between arrays of polydimethylsiloxane gecko footpad-mimetic tilted microflaps against smooth and rough glass surfaces. Constant attachments and detachments occur between the surfaces during shearing, as described by an avalanche model. These detachments ultimately result in failure of the adhesion interface and have been characterized in this study. Stick-slip friction disappears with increasing velocity when the flaps are sheared against a smooth silica surface; however, stick-slip was always present at all velocities and loads tested when shearing the flaps against rough glass surfaces. These results demonstrate the significance of pre-load, shearing velocity, shearing distances, commensurability and shearing direction of gecko-mimetic adhesives and provide us a simple model for analysing and/or designing such systems. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Accurate alpha sticking fractions from improved calculations relevant for muon catalyzed fusion

International Nuclear Information System (INIS)

Szalewicz, K.

1990-05-01

Recent experiments have shown that under proper conditions a single muon may catalyze almost two hundred fusions in its lifetime. This process proceeds through formation of muonic molecular ions. Properties of these ions are central to the understanding of the phenomenon. Our work included the most accurate calculations of the energy levels and Coulombic sticking fractions for tdμ and other muonic molecular ions, calculations of Auger transition rates, calculations of corrections to the energy levels due to interactions with the most molecule, and calculation of the reactivation of muons from α particles. The majority of our effort has been devoted to the theory and computation of the influence of the strong nuclear forces on fusion rates and sticking fractions. We have calculated fusion rates for tdμ including the effects of nuclear forces on the molecular wave functions. We have also shown that these results can be reproduced to almost four digit accuracy by using a very simple quasifactorizable expression which does not require modifications of the molecular wave functions. Our sticking fractions are more accurate than any other theoretical values. We have used a more sophisticated theory than any other work and our numerical calculations have converged to at least three significant digits

Spectral analysis of the stick-slip phenomenon in "oral" tribological texture evaluation.

Science.gov (United States)

Sanahuja, Solange; Upadhyay, Rutuja; Briesen, Heiko; Chen, Jianshe

2017-08-01

"Oral" tribology has become a new paradigm in food texture studies to understand complex texture attributes, such as creaminess, oiliness, and astringency, which could not be successfully characterized by traditional texture analysis nor by rheology. Stick-slip effects resulting from intermittent sliding motion during kinetic friction of oral mucosa could constitute an additional determining factor of sensory perception where traditional friction coefficient values and their Stribeck regimes fail in predicting different lubricant (food bolus and saliva) behaviors. It was hypothesized that the observed jagged behavior of most sliding force curves are due to stick-slip effects and depend on test velocity, normal load, surface roughness as well as lubricant type. Therefore, different measurement set-ups were investigated: sliding velocities from 0.01 to 40 mm/s, loads of 0.5 and 2.5 N as well as a smooth and a textured silicone contact surface. Moreover, dry contact measurements were compared to model food systems, such as water, oil, and oil-in-water emulsions. Spectral analysis permitted to extract the distribution of stick-slip magnitudes for specific wave numbers, characterizing the occurrence of jagged force peaks per unit sliding distance, similar to frequencies per unit time. The spectral features were affected by all the above mentioned tested factors. Stick-slip created vibration frequencies in the range of those detected by oral mechanoreceptors (0.3-400 Hz). The study thus provides a new insight into the use of tribology in food psychophysics. Dynamic spectral analysis has been applied for the first time to the force-displacement curves in "oral" tribology. Analyzing the stick-slip phenomenon in the dynamic friction provides new information that is generally overlooked or confused with machine noise and which may help to understand friction-related sensory attributes. This approach allows us to differentiate samples that have similar friction coefficient

Antioxidant capacity of chewing stick miswak Salvadora persica

OpenAIRE

Mohamed, Saleh A; Khan, Jalaluddin A

2013-01-01

Background Chewing stick (miswak Salvadora persica L.) is an effective tool for oral hygiene. It possessed various biological properties including significant antibacterial and anti-fungal effects. In the present study, we evaluated the antioxidant compounds in miswak. Method Miswak root was extracted with 80% methanol. Methanol extract as antioxidant was evaluated by using DPPH, ABTS and phosphomolybdenum complex assays and analysis by GC-MS. Peroxidase, catalase and polyphenoloxidase assays...

The sticking probability for H-2 on some transition metals at a hydrogen pressure of 1 bar

DEFF Research Database (Denmark)

Johansson, Martin; Lytken, Ole; Chorkendorff, Ib

2008-01-01

The sticking probability for hydrogen on films of Co, Ni, Cu, Ru, Rh, Pd, Ir, and Pt supported on graphite has been measured at a hydrogen pressure of 1 bar in the temperature range 40–200 °C. The sticking probability is found to increase in the order Ni, Co, Ir, Pd, Pt, Rh, and Ru at temperature...

The sticking probability for H-2 in presence of CO on some transition metals at a hydrogen pressure of 1 bar

DEFF Research Database (Denmark)

Johansson, Martin; Lytken, Ole; Chorkendorff, Ib

2008-01-01

The sticking probability for H-2 on Ni, Co, Cu, Rh, Ru, Pd, it and Pt metal films supported on graphite has been investigated in a gas mixture consisting of 10 ppm carbon monoxide in hydrogen at a total pressure of 1 bar in the temperature range 40-200 degrees C. Carbon monoxide inhibits the stic......The sticking probability for H-2 on Ni, Co, Cu, Rh, Ru, Pd, it and Pt metal films supported on graphite has been investigated in a gas mixture consisting of 10 ppm carbon monoxide in hydrogen at a total pressure of 1 bar in the temperature range 40-200 degrees C. Carbon monoxide inhibits...... the sticking probability significantly for all the metals, even at 200 degrees C. In the presence of 10 ppm CO, the sticking probability increases in the order It, Pt, Ni, Co, Pd, Rh, Ru, whereas for Cu, it is below the detection limit of the measurement, even in pure H2. The sticking probability for H2...

Detonation Propagation in Slabs and Axisymmetric Rate Sticks

Science.gov (United States)

Romick, Christopher; Aslam, Tariq

Insensitive high explosives (IHE) have many benefits; however, these IHEs exhibit longer reaction zones than more conventional high explosives (HE). This makes IHEs less ideal explosives and more susceptible to edge effects as well as other performance degradation issues. Thus, there is a resulting reduction in the detonation speed within the explosive. Many HE computational models, e. g. WSD, SURF, CREST, have shock-dependent reaction rates. This dependency places a high value on having an accurate shock speed. In the common practice of shock-capturing, there is ambiguity in the shock-state due to smoothing of the shock-front. Moreover, obtaining an accurate shock speed with shock-capturing becomes prohibitively computationally expensive in multiple dimensions. The use of shock-fitting removes the ambiguity of the shock-state as it is one of the boundaries. As such, the required resolution for a given error in the detonation speed is less than with shock-capturing. This allows for further insight into performance degradation. A two-dimensional shock-fitting scheme has been developed for unconfined slabs and rate sticks of HE. The HE modeling is accomplished by Euler equations utilizing several models with single-step irreversible kinetics in slab and rate stick geometries. Department of Energy - LANL.

SMART STICK DESIGN WITH OBSTACLE DETECTION AND NAVIGATION AS THE HELPING TOOL FOR BLIND PEOPLE

OpenAIRE

Sumar Hadi*, Susilo Adi Widyanto, Paryanto, Kurnia Chamid, Rachmat Muhamad Andika

2018-01-01

Smart stick designed for the blind people, this appliance can help detect obstacles with the use of infrared sensor, ultrasonic and water. The obstacles in a distance of about 3 m can be detected assistance from this sensor. In addition, we use GPS (Global Positioning System) to give the position and navigation on the stick. Using GPS (Global Positioning System) help the blind people reaches its destination. GPS (Global Positioning System) recipients to get the location of the latest and the ...

Influence of movement regime of stick-slip process on the size distribution of accompanying acoustic emission characteristics

Science.gov (United States)

Matcharashvili, Teimuraz; Chelidze, Tamaz; Zhukova, Natalia; Mepharidze, Ekaterine; Sborshchikov, Alexander

2010-05-01

Many scientific works on dynamics of earthquake generation are devoted to qualitative and quantitative reproduction of behavior of seismic faults. Number of theoretical, numerical or physical models are already designed for this purpose. Main assumption of these works is that the correct model must be capable to reproduce power law type relation for event sizes with magnitudes greater than or equal to a some threshold value, similar to Gutenberg-Richter (GR) law for the size distribution of earthquakes. To model behavior of a seismic faults in laboratory conditions spring-block experimental systems are often used. They enable to generate stick-slip movement, intermittent behavior occurring when two solids in contact slide relative to each other driven at a constant velocity. Wide interest to such spring-block models is caused by the fact that stick-slip is recognized as a basic process underlying earthquakes generation along pre-existing faults. It is worth to mention, that in stick slip experiments reproduction of power law, in slip events size distribution, with b values close or equal to the one found for natural seismicity is possible. Stick-slip process observed in these experimental models is accompanied by a transient elastic waves propagation generated during the rapid release of stress energy in spring-block system. Oscillations of stress energy can be detected as a characteristic acoustic emission (AE). Accompanying stick slip AE is the subject of intense investigation, but many aspects of this process are still unclear. In the present research we aimed to investigate dynamics of stick slip AE in order to find whether its distributional properties obey power law. Experiments have been carried out on spring-block system consisting of fixed and sliding plates of roughly finished basalt samples. The sliding block was driven with a constant velocity. Experiments have been carried out for five different stiffness of pulling spring. Thus five different regimes

Nonparametric Bayesian models through probit stick-breaking processes.

Science.gov (United States)

Rodríguez, Abel; Dunson, David B

2011-03-01

We describe a novel class of Bayesian nonparametric priors based on stick-breaking constructions where the weights of the process are constructed as probit transformations of normal random variables. We show that these priors are extremely flexible, allowing us to generate a great variety of models while preserving computational simplicity. Particular emphasis is placed on the construction of rich temporal and spatial processes, which are applied to two problems in finance and ecology.

Age estimates and stick-nest rat middens

International Nuclear Information System (INIS)

Pearson, S.; Lawson, E.

1998-01-01

A total of 112 radiocarbon analyses on stick-nest rat middens gathered from published and grey literature show (see figure) that the middens of stick-nest rats have a positively skewed distribution. The average of all the estimates is ca. 2967 BP with the oldest midden dated at around 10870 BP. Over 75% of the results are younger than -4480 BP. Possible explanations for this pattern include; sample bias, rate of midden and cave decay, a real pattern of midden age distribution and development of techniques. The components of the midden being used for radiocarbon analysis has been remarkably uniform. This reflects the small number of researchers in the field and the experience of the American packrat midden research. Early researchers using conventional methods used charcoal and large mixtures of material whereas AMS now allows individual scats to be analysed. In fact 37% of analyses have been on scats as these provide direct evidence of midden occupation and are plentiful in the midden matrix. 66% of analyses used AINSE's AMS method and 23% used conventional methods - the distribution of results using the two methods are similar. A number of dates have incomplete laboratory or methods information. Similar analysis of packrat midden dates in the United States identified both ecological and systematic bias in the age patterns (Webb 1986). The efficacy of midden analysis in Australia, as in America, is limited by the cost of age estimates

Fault healing and earthquake spectra from stick slip sequences in the laboratory and on active faults

Science.gov (United States)

McLaskey, G. C.; Glaser, S. D.; Thomas, A.; Burgmann, R.

2011-12-01

Repeating earthquake sequences (RES) are thought to occur on isolated patches of a fault that fail in repeated stick-slip fashion. RES enable researchers to study the effect of variations in earthquake recurrence time and the relationship between fault healing and earthquake generation. Fault healing is thought to be the physical process responsible for the 'state' variable in widely used rate- and state-dependent friction equations. We analyze RES created in laboratory stick slip experiments on a direct shear apparatus instrumented with an array of very high frequency (1KHz - 1MHz) displacement sensors. Tests are conducted on the model material polymethylmethacrylate (PMMA). While frictional properties of this glassy polymer can be characterized with the rate- and state- dependent friction laws, the rate of healing in PMMA is higher than room temperature rock. Our experiments show that in addition to a modest increase in fault strength and stress drop with increasing healing time, there are distinct spectral changes in the recorded laboratory earthquakes. Using the impact of a tiny sphere on the surface of the test specimen as a known source calibration function, we are able to remove the instrument and apparatus response from recorded signals so that the source spectrum of the laboratory earthquakes can be accurately estimated. The rupture of a fault that was allowed to heal produces a laboratory earthquake with increased high frequency content compared to one produced by a fault which has had less time to heal. These laboratory results are supported by observations of RES on the Calaveras and San Andreas faults, which show similar spectral changes when recurrence time is perturbed by a nearby large earthquake. Healing is typically attributed to a creep-like relaxation of the material which causes the true area of contact of interacting asperity populations to increase with time in a quasi-logarithmic way. The increase in high frequency seismicity shown here

Neither a Toddler nor a Stick-in-the-Mud

Science.gov (United States)

Smith, Andrea Livi

2011-01-01

The goal of this paper is to express the views from the "outside," from laypeople who want to go to museums, but perhaps find themselves not going very often. Adult visitors to history museums are often treated as either toddlers or sticks-in-the-mud, where they are assumed to break anything they touch, or enjoy didactic lectures. As a result,…

On evaluation of the nuclear interaction effect on muon sticking in μ-catalyzed dt synthesis

International Nuclear Information System (INIS)

Khiger, L.Ya.

1994-01-01

The effect of nucler interaction on the muon -alpha-particle sticking coefficient is considered on the basis of the previously developed formalism of description of the deuterium and tritium nuclei muon catalysed fusion. The account of Coulomb interaction between the muon and nuclear subsystem in the intermediate state is shown to change substantially this coefficient. The results of numerical calculations of the sticking coefficient are presented, the value of the coefficient turns out to be 3 - 4% higher than that found in the sudden approximation

Physicochemical and functional properties, microstructure, and storage stability of whey protein/polyvinylpyrrolidone based glue sticks

Directory of Open Access Journals (Sweden)

Guorong Wang

2012-11-01

Full Text Available A glue stick is comprised of solidified adhesive mounted in a lipstick-like push-up tube. Whey is a byproduct of cheese making. Direct disposal of whey can cause environmental pollution. The objective of this study was to use whey protein isolate (WPI as a natural polymer along with polyvinylpyrrolidone (PVP to develop safe glue sticks. Pre-dissolved WPI solution, PVP, sucrose, 1,2-propanediol (PG, sodium stearate, defoamer, and preservative were mixed and dissolved in water at 90 oC and then molded in push-up tubes. Chemical composition, functional properties (bonding strength, glue setting time, gel hardness, extension/retraction, and spreading properties, microstructure, and storage stability of the prototypes were evaluated in comparison with a commercial control. Results showed that all WPI/PVP prototypes had desirable bonding strength and exhibited faster setting than PVP prototypes and control. WPI could reduce gel hardness and form less compact and rougher structures than that of PVP, but there was no difference in bonding strength. PVP and sucrose could increase the hygroscopicity of glue sticks, thus increasing storage stability. Finally, the optimized prototype GS3 (major components: WPI 8.0%, PVP 12.0%, 1,2-propanediol 10.0%, sucrose 10.0%, and stearic sodium 7.0% had a comparable functionality to the commercial control. Results indicated that whey protein could be used as an adhesive polymer for glue stick formulations, which could be used to bond fiber or cellulose derived substrates such as paper.

Development of Stick and Ball Sports on Gateball

OpenAIRE

Indriyanti; Tri Nur Harsono; Rumini

2017-01-01

The purpose of this research is to make product design development of stick and ball sports in gateball. The approach used in this study is a method of Research and Development. The subject of this research is the Central Java on gateball club event gateball in Semarang and Yogyakarta. Experts and expert expert gateball expert in mechanical engineering. The data analysis phase the work field, and the data analysis stage include observation, observation, interviews, and documentation of the te...

A semi-analytical study of stick-slip oscillations in drilling systems

NARCIS (Netherlands)

Besselink, B.; Wouw, van de N.; Nijmeijer, H.

2011-01-01

Rotary drilling systems are known to exhibit torsional stick-slip vibrations, which decrease drilling efficiency and accelerate the wear of drag bits. The mechanisms leading to these torsional vibrations are analyzed using a model that includes both axial and torsional drill string dynamics, which

The Sticking Probability for Hydrogen on Ni, Pd, and Pt at a Hydrogen pressure of 1 bar

DEFF Research Database (Denmark)

Johansson, Martin; Lytken, Ole; Chorkendorff, Ib

2007-01-01

A technique for measurements of the sticking probability of hydrogen on metal surfaces at high (ambient) pressure is described. As an example, measurements for Ni, Pd and Pt at a hydrogen pressure of 1 bar and temperatures between 40 and 200 degrees C are presented. The sticking probabilities are......, Pt. The transition between beta- and alpha-phase in the H-Pd system has a significant effect on the activity for Pd....

Push-and-stick mechanism for charged and excited small cluster emission under ion bombardment

International Nuclear Information System (INIS)

Bitensky, I.S.; Parilis, E.S.; Wojciechowski, I.A.

1992-01-01

The mechanism for the formation, excitation and ionization of small clusters emitted under ion bombardment is discussed. It is shown that the increased degree of ionization for the transition metal dimers, trimers and tetramers can be explained by the existence of an additional effective channel for their formation, namely the associative ionization process. A simple estimate shows that the sticking together of a fast cascade atom and the pushed out surface atom is 30-40 times more effective for dimer formation, than the recombination of two fast atoms. This push-and-stick mechanism of cluster formation could also be effective for the formation of trimers and tetramers. (orig.)

Evaluation of the dimethylglyoxime stick test for the detection of nickel

DEFF Research Database (Denmark)

Menné, T; Andersen, Klaus Ejner; Kaaber, K

1987-01-01

The value of the dimethylglyoxime stick test for the detection of nickel was determined for 54 randomly purchased metal objects designed for prolonged skin contact, and for 15 metal alloys of known composition. Surface nickel content was determined by EDAX analysis (energy dispersive X-ray) and n...

The effect of vacuum packaging on histamine changes of milkfish sticks at various storage temperatures.

Science.gov (United States)

Kung, Hsien-Feng; Lee, Yi-Chen; Lin, Chiang-Wei; Huang, Yu-Ru; Cheng, Chao-An; Lin, Chia-Min; Tsai, Yung-Hsiang

2017-10-01

The effects of polyethylene packaging (PEP) (in air) and vacuum packaging (VP) on the histamine related quality of milkfish sticks stored at different temperatures (-20°C, 4°C, 15°C, and 25°C) were studied. The results showed that the aerobic plate count (APC), pH, total volatile basic nitrogen (TVBN), and histamine contents increased as storage time increased when the PEP and VP samples were stored at 25°C. At below 15°C, the APC, TVBN, pH, and histamine levels in PEP and VP samples were retarded, but the VP samples had considerably lower levels of APC, TVBN, and histamine than PEP samples. Once the frozen fish samples stored at -20°C for 2 months were thawed and stored at 25°C, VP retarded the increase of histamine in milkfish sticks as compared to PEP. In summary, this result suggested the milkfish sticks packed with VP and stored below 4°C could prevent deterioration of product quality and extend shelf-life. Copyright © 2017. Published by Elsevier B.V.

3D straight-stick laparoscopy versus 3D robotics for task performance in novice surgeons: a randomised crossover trial.

Science.gov (United States)

Shakir, Fevzi; Jan, Haider; Kent, Andrew

2016-12-01

The advent of three-dimensional passive stereoscopic imaging has led to the development of 3D laparoscopy. In simulation tasks, a reduction in error rate and performance time is seen with 3D compared to two-dimensional (2D) laparoscopy with both novice and expert surgeons. Robotics utilises 3D and instrument articulation through a console interface. Robotic trials have demonstrated that tasks performed in 3D produced fewer errors and quicker performance times compared with those in 2D. It was therefore perceived that the main advantage of robotic surgery was in fact 3D. Our aim was to compare 3D straight-stick laparoscopic task performance (3D) with robotic 3D (Robot), to determine whether robotic surgery confers additional benefit over and above 3D visualisation. We randomised 20 novice surgeons to perform four validated surgical tasks, either with straight-stick 3D laparoscopy followed by 3D robotic surgery or in the reverse order. The trial was conducted in two fully functional operating theatres. The primary outcome of the study was the error rate as defined for each task, and the secondary outcome was the time taken to complete each task. The participants were asked to perform the tasks as quickly and as accurately as possible. Data were analysed using SPSS version 21. The median error rate for completion of all four tasks with the robot was 2.75 and 5.25 for 3D with a P value performance time for completion of all four tasks with the robot was 157.1 and 342.5 s for 3D with a P value 3D robotic systems over 3D straight-stick laparoscopy, in terms of reduced error rate and quicker task performance time.

An unusual cause of duodenal perforation due to a lollipop stick

Directory of Open Access Journals (Sweden)

Mi Jin Kim

2013-04-01

Full Text Available Children have a natural tendency to explore objects with their mouths; this can result in the swallowing of foreign objects. Most ingested foreign bodies pass uneventfully through the gastrointestinal tract.However, some foreign bodies cause obstruction or perforation of the gastrointestinal tract, requiring surgical intervention. Perforation of the gastrointestinal tract may be associated with considerable morbidity and mortality. The most common sites of intestinal foreign body perforation are the ileocecal and rectosigmoid regions. Foreign body perforation of the duodenum is relatively uncommon. We report the first Korean case of duodenal perforation by an ingested 8-cm lollipop stick. Lollipops are popular with the children and fairly accessible to them, as most parents are not aware of their potential harm. Pediatric clinicians should be aware of the risks associated with lollipop stick ingestion. Our report also describes the feasibility and safety of laparoscopic diagnosis and management of pediatric patients with peritonitis induced by the ingestion of foreign bodies.

Coordination of the Walking Stick Insect Using a System of Nonlinear Coupled Oscillators

National Research Council Canada - National Science Library

Marvin, Daryl J

1992-01-01

The area of walking machines is investigated. A design for a central pattern generator composed of nonlinear coupled oscillators which generates the characteristic gaits of the walking stick insect is presented...

Carbon nanotube forests: a non-stick workbench for nanomanipulation

International Nuclear Information System (INIS)

Gjerde, Kjetil; Kjelstrup-Hansen, Jakob; Clausen, Casper H; Teo, Kenneth B K; Milne, William I; Rubahn, Horst-Guenter; Boeggild, Peter

2006-01-01

The ubiquitous static friction (stiction) and adhesion forces comprise a major obstacle in the manipulation of matter at the nanoscale (Falvo et al 1999 Nature 397 236; Urbakh M et al 2004 Nature 430 525). In this work it is shown that a surface coated with vertically aligned carbon nanotubes-a nanotube forest-acts as an effective non-stick workbench for the manipulation of micro-objects and fibres/wires with one or more dimensions in the nano-range. These include organic nanofibres (Balzer and Rubahn 2001 Appl. Phys. Lett. 79 3860) and microsized latex beads, which adhere strongly even to a conventional low surface-energy material like Teflon. Although organic nanofibres are attractive as device components due to their chemical adaptability, adhesion forces nearly always rule out manipulation as a route to assembly of prototype devices based on such materials, because organic materials are soft and fragile, and tend to stick to any surface. We demonstrate here that the nanotube forest due to its roughness not only exhibits very low stiction and dynamic friction; it also acts as a springy and mechanically compliant surface, making it possible to lift up and manipulate delicate nanostructures such as organic nanofibres in ways not possible on planar, rigid surfaces

Surface free energy of non-stick coatings deposited using closed field unbalanced magnetron sputter ion plating

International Nuclear Information System (INIS)

Sun, C.-C.; Lee, S.-C.; Dai, S.-B.; Tien, S.-L.; Chang, C.-C.; Fu, Y.-S.

2007-01-01

Semiconductor IC packaging molding dies require wear resistance, corrosion resistance and non-sticking (with a low surface free energy). The molding releasing capability and performance are directly associated with the surface free energy between the coating and product material. The serious sticking problem reduces productivity and reliability. Depositing TiN, TiMoS, ZrN, CrC, CrN, NiCr, NiCrN, CrTiAlN and CrNiTiAlN coatings using closed field unbalanced magnetron sputter ion plating, and characterizing their surface free energy are the main object in developing a non-stick coating system for semiconductor IC molding tools. The contact angle of water, diiodomethane and ethylene glycol on the coated surfaces were measured at temperature in 20 deg. C using a Dataphysics OCA-20 contact angle analyzer. The surface free energy of the coatings and their components (dispersion and polar) were calculated using the Owens-Wendt geometric mean approach. The surface roughness was investigated by atomic force microscopy (AFM). The adhesion force of these coatings was measured using direct tensile pull-off test apparatus. The experimental results showed that NiCrN, CrN and NiCrTiAlN coatings outperformed TiN, ZrN, NiCr, CiTiAlN, CrC and TiMoS coatings in terms of non-sticking, and thus have the potential as working layers for injection molding industrial equipment, especially in semiconductor IC packaging molding applications

CPW-fed Circularly Polarized Slot Antenna with Small Gap and Stick-shaped Shorted Strip for UHF FRID Readers

Science.gov (United States)

Pan, Chien-Yuan; Su, Chum-Chieh; Yang, Wei-Lin

2018-04-01

A new circularly polarized (CP) slot antenna with a small gap and a stick-shaped shorted strip is presented. The proposed antenna has a sufficient bandwidth for ultrahigh frequency (UHF) radio-frequency identification (RFID) reader applications. The antenna structure consists of a rectangular slot with a small gap, a stick-shaped shorted strip and a 50 Ω coplanar waveguide (CPW) feedline with an asymmetrical ground plane. By using the stick -shaped shorted strip to disturb magnetic current distribution on the slot, the CP radiation can be generated. The measured results demonstrate that the proposed antenna can reach a 10 dB return loss impedance bandwidth of 14.1 % (894-1030 MHz) and a 3 dB axial ratio (AR) bandwidth of 6.4 % (910-970 MHz). The whole antenna size is 80 × 80 × 1.6 mm3.

Creep and stick-slip in subglacial granular beds forced by ocean tides

DEFF Research Database (Denmark)

Damsgaard, Anders; Egholm, David Lundbek; Beem, Lucas H.

and laboratory experiments provide important constraints, but existing models have not been able to explain the internal processes driving transitions from stability to stick-slip within the sediment. In this presentation we use a coupled numerical model of grain and fluid dynamics to show that rapid...

Grain scale observations of stick-slip dynamics in fluid saturated granular fault gouge

Science.gov (United States)

Johnson, P. A.; Dorostkar, O.; Guyer, R. A.; Marone, C.; Carmeliet, J.

2017-12-01

We are studying granular mechanics during slip. In the present work, we conduct coupled computational fluid dynamics (CFD) and discrete element method (DEM) simulations to study grain scale characteristics of slip instabilities in fluid saturated granular fault gouge. The granular sample is confined with constant normal load (10 MPa), and sheared with constant velocity (0.6 mm/s). This loading configuration is chosen to promote stick-slip dynamics, based on a phase-space study. Fluid is introduced in the beginning of stick phase and characteristics of slip events i.e. macroscopic friction coefficient, kinetic energy and layer thickness are monitored. At the grain scale, we monitor particle coordination number, fluid-particle interaction forces as well as particle and fluid kinetic energy. Our observations show that presence of fluids in a drained granular fault gouge stabilizes the layer in the stick phase and increases the recurrence time. In saturated model, we observe that average particle coordination number reaches higher values compared to dry granular gouge. Upon slip, we observe that a larger portion of the granular sample is mobilized in saturated gouge compared to dry system. We also observe that regions with high particle kinetic energy are correlated with zones of high fluid motion. Our observations highlight that spatiotemporal profile of fluid dynamic pressure affects the characteristics of slip instabilities, increasing macroscopic friction coefficient drop, kinetic energy release and granular layer compaction. We show that numerical simulations help characterize the micromechanics of fault mechanics.

Locating the origin of stick slip instabilities in sheared granular layers

Science.gov (United States)

Korkolis, Evangelos; Niemeijer, André

2017-04-01

Acoustic emission (AE) monitoring is a non-invasive technique widely used to evaluate the state of materials and structures. We have developed a system that can locate the source of AE events associated with unstable sliding (stick-slip) of sheared granular layers during laboratory friction experiments. Our aim is to map the spatial distribution of energy release due to permanent microstructural changes, using AE source locations as proxies. This will allow us to determine the distribution of applied work in a granular medium, which will be useful in developing constitutive laws that describe the frictional behavior of such materials. The AE monitoring system is installed on a rotary shear apparatus. This type of apparatus is used to investigate the micromechanical processes responsible for the macroscopic frictional behavior of granular materials at large shear displacements. Two arrays of 8 piezoelectric sensors each are installed into the ring-shaped steel pistons that confine our samples. The sensors are connected to a high-speed, multichannel oscilloscope that can record full waveforms. The apparatus is also equipped with a system that continuously records normal and lateral (shear) loads and displacements, as well as pore fluid pressure. Thus, we can calculate the frictional and volumetric response of our granular aggregates, as well as the location of AE sources. Here, we report on the results of room temperature experiments on granular aggregates consisting of glass beads or segregated mixtures of glass beads and calcite, at up to 5 MPa normal stress and sliding velocities between 1 and 100 μm/s. Under these conditions, glass beads exhibit unstable sliding behavior accompanied by significant AE activity, whereas calcite exhibits stable sliding and produces no AEs. We recorded a range of unstable sliding behaviors, from fast, regular stick slip at high normal stress (> 4 MPa) and sliding velocities below 20 μm/s, to irregular stick slip at low normal

Changes in Quality Properties and Kinetics of Reducing Sugar Removal in Potato Sticks during Blanching

Directory of Open Access Journals (Sweden)

M. Asadi

2015-01-01

Full Text Available Due to problems in storage, transportation and price fluctuation of fresh potato, production of ready-to-use products like French fries is of particular importance. French fries quality mainly depends on the appearance, taste, color, texture and oil uptake. One of the important steps in product processing is blanching. This step improves product texture and color due to the decrease in reducing sugar content, and causes reduction of oil uptake due to the gelatinization of surface starch. Therefore, by selecting a suitable method and condition, the improvement of product quality is possible. In order to investigate the effect of blanching temperature on kinetic of the reducing sugar content and changes in potato stick color and texture, sticks with 0.8 0.8 8 cm dimensions were prepared and blanching was carried out with hot water at different temperatures (60, 70, 80 and 90°C and various times up to 120 minutes. Color, texture and reducing sugar content of samples were measured during blanching. The results showed that reducing sugar content was reduced during the blanching as a function of temperature and time. Also, product color and texture were mainly affected by blanching temperature, with the low temperature being more suitable to improve potato stick quality. According to the results, there was no significant difference between blanching at 80, 90°C and 60°C for reducing sugar content. Also, for this parameter, there was no significant difference between times of 100 and 5 minutes at 60°C. The least texture damage was obtained by blanching at 60°C in a short time. It could be concluded that to preserve potato stick color and texture and reduce energy consumption, blanching can be done at 60°C for 5 minutes if enzymes are inactivated.

Stick-slip behaviour of a viscoelastic flat sliding along a rigid indenter

NARCIS (Netherlands)

Budi Setiyana, Budi; Ismail, Rifky; Jamari, J.; Schipper, Dirk Jan

2016-01-01

The sliding contact of soft material surface due to a rigid indenter is different from metal and some other polymers. A stick-slip motion is more frequently obtained than a smooth motion. By modeling the soft material as low damping viscoelastic material, this study proposes an analytical model to

Experimental evidence of reduced sticking of nanoparticles on a metal grid

NARCIS (Netherlands)

Gulijk, C. van; Bal, E.A.; Schmidt-Ott, A.

2009-01-01

Filtering of NaCl, CaCl2, (NH4)2SO4 and NiSO4 aerosol particles 7–20 nm in diameter by a stainless steel grid was studied in order to find out if there is perfect sticking or partial rebound. Our experiment used particles from a spray-drying process, the majority of which were electrically neutral.

StickOn Adhesive Limited: A Strategic Pursuit in Challenging Environment

OpenAIRE

Sumita Rai; Ashok Banerjee

2012-01-01

This case focuses upon the issues that have arisen as StickOn Adhesive Limited (SOAL) faces the challenges of competition in the industry through two-pronged strategies — backward integration and product diversification. The case discusses various initiatives taken by SOAL to meet strategic goals. SOAL has initiated changes in its marketing policies, re-layered the organization structure, and empowered the internal management to realize growth objectives. The case examines the corporate dilem...

Premonitory acoustic emissions and stick-slip in natural and smooth-faulted Westerly granite

Science.gov (United States)

Thompson, B.D.; Young, R.P.; Lockner, David A.

2009-01-01

A stick-slip event was induced in a cylindrical sample of Westerly granite containing a preexisting natural fault by loading at constant confining pressure of 150 MPa. Continuously recorded acoustic emission (AE) data and computer tomography (CT)-generated images of the fault plane were combined to provide a detailed examination of microscale processes operating on the fault. The dynamic stick-slip event, considered to be a laboratory analog of an earthquake, generated an ultrasonic signal that was recorded as a large-amplitude AE event. First arrivals of this event were inverted to determine the nucleation site of slip, which is associated with a geometric asperity on the fault surface. CT images and AE locations suggest that a variety of asperities existed in the sample because of the intersection of branch or splay faults with the main fault. This experiment is compared with a stick-slip experiment on a sample prepared with a smooth, artificial saw-cut fault surface. Nearly a thousand times more AE were observed for the natural fault, which has a higher friction coefficient (0.78 compared to 0.53) and larger shear stress drop (140 compared to 68 MPa). However at the measured resolution, the ultrasonic signal emitted during slip initiation does not vary significantly between the two experiments, suggesting a similar dynamic rupture process. We propose that the natural faulted sample under triaxial compression provides a good laboratory analogue for a field-scale fault system in terms of the presence of asperities, fault surface heterogeneity, and interaction of branching faults. ?? 2009.

Stick-Slip Motion of Moving Contact Line on Chemically Patterned Surfaces

KAUST Repository

Wu, Congmin; Lei, Siulong; Qian, Tiezheng; Wang, Xiaoping

2009-01-01

Based on our continuum hydrodynamic model for immiscible two-phase flows at solid surfaces, the stick-slip motion has been predicted for moving contact line at chemically patterned surfaces [Wang et al., J. Fluid Mech., 605 (2008), pp. 59-78]. In this paper we show that the continuum predictions can be quantitatively verified by molecular dynamics (MD) simulations. Our MD simulations are carried out for two immiscible Lennard-Jones fluids confined by two planar solid walls in Poiseuille flow geometry. In particular, one solid surface is chemically patterned with alternating stripes. For comparison, the continuum model is numerically solved using material parameters directly measured in MD simulations. From oscillatory fluid-fluid interface to intermittent stick-slip motion of moving contact line, we have quantitative agreement between the continuum and MD results. This agreement is attributed to the accurate description down to molecular scale by the generalized Navier boundary condition in our continuum model. Numerical results are also presented for the relaxational dynamics of fluid-fluid interface, in agreement with a theoretical analysis based on the Onsager principle of minimum energy dissipation. © 2010 Global-Science Press.

Stick and feel system design: Systèmes de restitution des efforts au manche

National Research Council Canada - National Science Library

Gibson, J. C; Hess, R. A

1997-01-01

Since the earliest days of manned flight, designers have to sought to assist the pilot in the performance of tasks by using stick and feel systems to bring these tasks within the bounds of human physical capabilities...

Analysis of bit-rock interaction during stick-slip vibrations using PDC cutting force model

Energy Technology Data Exchange (ETDEWEB)

Patil, P.A.; Teodoriu, C. [Technische Univ. Clausthal, Clausthal-Zellerfeld (Germany). ITE

2013-08-01

Drillstring vibration is one of the limiting factors maximizing the drilling performance and also causes premature failure of drillstring components. Polycrystalline diamond compact (PDC) bit enhances the overall drilling performance giving the best rate of penetrations with less cost per foot but the PDC bits are more susceptible to the stick slip phenomena which results in high fluctuations of bit rotational speed. Based on the torsional drillstring model developed using Matlab/Simulink for analyzing the parametric influence on stick-slip vibrations due to drilling parameters and drillstring properties, the study of relations between weight on bit, torque on bit, bit speed, rate of penetration and friction coefficient have been analyzed. While drilling with the PDC bits, the bit-rock interaction has been characterized by cutting forces and the frictional forces. The torque on bit and the weight on bit have both the cutting component and the frictional component when resolved in horizontal and vertical direction. The paper considers that the bit is undergoing stick-slip vibrations while analyzing the bit-rock interaction of the PDC bit. The Matlab/Simulink bit-rock interaction model has been developed which gives the average cutting torque, T{sub c}, and friction torque, T{sub f}, values on cutters as well as corresponding average weight transferred by the cutting face, W{sub c}, and the wear flat face, W{sub f}, of the cutters value due to friction.

Peeling-angle dependence of the stick-slip instability during adhesive tape peeling.

Science.gov (United States)

Dalbe, Marie-Julie; Santucci, Stéphane; Vanel, Loïc; Cortet, Pierre-Philippe

2014-12-28

The influence of peeling angle on the dynamics observed during the stick-slip peeling of an adhesive tape has been investigated. This study relies on a new experimental setup for peeling at a constant driving velocity while keeping constant the peeling angle and peeled tape length. The thresholds of the instability are shown to be associated with a subcritical bifurcation and bistability of the system. The velocity onset of the instability is moreover revealed to strongly depend on the peeling angle. This could be the consequence of peeling angle dependance of either the fracture energy of the adhesive-substrate joint or the effective stiffness at play between the peeling front and the point at which the peeling is enforced. The shape of the peeling front velocity fluctuations is finally shown to progressively change from typical stick-slip relaxation oscillations to nearly sinusoidal oscillations as the peeling angle is increased. We suggest that this transition might be controlled by inertial effects possibly associated with the propagation of the peeling force fluctuations through elongation waves in the peeled tape.

Clinical use of femoral artery hemostasis sticking after interventional procedure via femoral artery access

International Nuclear Information System (INIS)

Zhu Zhongsheng; Chen Shaoliang; Ye Fei; Zhang Junjie; Zhou Jie; Tian Nailiang; Lin Song; Liu Zhizhong; Xiao Pingxi; Qu Hong

2010-01-01

Objective: To observe the clinical effect of the use of femoral artery hemostasis sticking V+PAD after the interventional procedure via femoral artery access. Methods: By using random permutation list 80 patients, who decided to receive coronary angiography and percutaneous transluminal coronary angioplasty, were randomly selected. Of the 80 patients, hemostasis sticking V + PAD was employed in 40 patients with even numbers (trial group), only manual compression was adopted to stop bleeding in another 40 patients with odd numbers (control group). All the patients were informed about this trial and had to sign a consent letter. The pressure time, the treatment method of access site after hemostasis, the posture in bed, the immobilization time, the comfort degree of patients, the complications of access site prior to discharge, etc. were observed and the results were compared between two groups. Results: There was no significant difference between two groups as respect to age, gender ratios,activated clotting time (ACT) value and blood pressure. However, significantly difference in the compression time and bed rest time existed between the two groups. The compression time in trial group and control group was (7.9 ± 0.5) min and (19.8 ± 5.1) min respectively (P<0.01), while the bed rest time in trial group and control group was (6.1 ± 5.0) hours and (23.9 ± 0.2) hours respectively (P<0.01). All patients in trial group was supine in bed with the head side of the bed raised at 30 degree immediately after the procedure, and the head side of the bed was further raised to 90 degree one hour later. The puncture site was bandaged with conventional compression and immobilization was not employed. Patients could lie in bed with free posture and the patient's comfort degree was greatly improved. During hospitalization no complications related to puncture site occurred in all patients except one obese woman in trial group who developed pseudoaneurysm. Conclusion: Femoral

Robust output-feedback control to eliminate stick-slip oscillations in drill-string systems

NARCIS (Netherlands)

Vromen, T.G.M.; Dai, C.H.; van de Wouw, N.; Oomen, T.A.E.; Astrid, P.; Nijmeijer, H.

2015-01-01

The aim of this paper is to design a robust output-feedback controller to eliminate torsional stick-slip vibrations. A multi-modal model of the torsional dynamics with a nonlinear bit-rock interaction model is used. The controller design is based on skewed-μ DK-iteration and the stability of the

Waffle production: influence of batter ingredients on sticking of fresh egg waffles at baking plates-Part I: effect of starch and sugar components.

Science.gov (United States)

Huber, Regina; Schoenlechner, Regine

2017-05-01

Fresh egg waffles are a sweet convenience product typically baked from eggs, water, sugar, flour, fat, leavening agents, emulsifiers, preservatives, and flavors. In industrial production, waffles are baked continuously in high amounts of up to 200 kg raw material per hour. Therefore, it is important that the waffles do not stick onto the baking plates, which can cause significant product loss and increased costs due to interruption of the baking process, required cleaning procedures, and restarting of the energy-consuming start-up phase. Sticking of waffles is greatly influenced not only by baking plate material, release agent, baking temperature, and time, but also by the batter ingredients. In this study, effects of different starches and sugar components were investigated. Within the selected starches, potato starch demonstrated the highest effects on increasing waffle stability and releasing properties compared to wheat and lupine flour (less than 7% sticking waffles). Rice flour performed worst, with almost 50% of sticking waffles. Most of these waffles were broken during take-off, due to their crumbly texture. Within the sugar components, glycerine was better suitable than sorbitol and crystal sugar was superior compared to powdered sugar. They required less take-off force. It could be demonstrated that waffles with increased stability and texture were those that showed the least number of sticking waffles, thus the main aim of batter ingredients was to improve waffle quality. Waffle quality was influenced by batter parameters, significant correlations could be found, for example, a positive correlation between pH- and L-value, negative correlations between pH- and a-value, or density and aw-value. This resulted in significant correlations with take-off-force, which was correlated with L*- and b*-value (negative) and positive to a*-value. Sticking behavior was strongly associated with b*-value (positive) and to a*-value (negative).

Antioxidant capacity of chewing stick miswak Salvadora persica.

Science.gov (United States)

Mohamed, Saleh A; Khan, Jalaluddin A

2013-02-21

Chewing stick (miswak Salvadora persica L.) is an effective tool for oral hygiene. It possessed various biological properties including significant antibacterial and anti-fungal effects. In the present study, we evaluated the antioxidant compounds in miswak. Miswak root was extracted with 80% methanol. Methanol extract as antioxidant was evaluated by using DPPH, ABTS and phosphomolybdenum complex assays and analysis by GC-MS. Peroxidase, catalase and polyphenoloxidase assays were performed for crude extract of miswak root. The methanol extract of miswak contained the highest amount of crude extract among the various solvent extracts. The methanol extract showed a concentration dependent scavenging of DPPH and ABTS radicals with IC50 values 4.8 and 1.6 μg crude extract, respectively. The total antioxidant activities, based on the reduction of molybdenum (VI) to molybdenum (V), increased with increasing crude extract content. The correlation coefficients (R2) between total crude extract and DPPH, ABTS scavenging activities and the formation of phosphomolybdenum complex were 0.97, 0.99 and 0.95, respectively. The GC-MS analysis showed that the methanol extract doesn't contain phenolic and flavonoid compounds or under detected limit. After silylation of methanol extract, three compounds namely 2-furancarboxaldehyde-5-(hydroxymethyl), furan-2-carboxylic acid-3-methyl- trimethylsilyl ester and D-erythro-pentofuranose-2-deoxy-1,3,5-tris-O-(trimethylsilyl) were identified by GC-MS analysis. These furan derivatives as they contain hydroxyl groups could be possessed antioxidant activities. The antioxidant enzymes were also detected in the miswak extract with high level of peroxidase and low level of catalase and polyphenoloxidase. The synergistic actions of antioxidant compounds and antioxidant enzymes make miswak is a good chewing stick for oral hygiene and food purposes.

Creep and stick-slip in subglacial granular beds forced by variations in water pressure

DEFF Research Database (Denmark)

Damsgaard, Anders; Egholm, David Lundbek; Beem, Lucas H.

of these sediment remains poorly understood. Measurements and laboratory experiments provide important constraints, but existing models have not been able to explain the internal processes driving transitions from stability to stick-slip within the sediment. In this presentation we use a coupled numerical model...

Effect of anisotropy on the sticking in muon-catalyzed fusion determined by the x-ray method

International Nuclear Information System (INIS)

Cohen, J.S.; Padial, N.T.

1989-01-01

The initial sticking in the 2p/sub m/ states of muonic helium in muon-catalyzed fusion (μCF) and the subsequent collisional excitation to these states are shown to have nonstatistical dependences on m that result in spatial anisotropy of the emitted x rays. This anisotropy, I(0 0 )/I(90 0 ), is found to be 0.71 for d-d μCF and 1.12 for d-t μCF in liquid targets, where the angle is between the coincidentally detected x ray and neutron. The effect is predicted to increase the actual Kα x-ray yield and corresponding sticking observed in a recent d-t μCF experiment by 4%. The Doppler broadening of the radiation observed at different angles is also examined

A change management approach to improving safety and preventing needle stick injuries.

Science.gov (United States)

Aziz, Ann-Marie

2017-09-01

Key drivers for preventing healthcare-associated infection (HCAI) include evidence-based practices and procedures that prevent infection. Among the current guidance for preventing HCAIs is evidence and mandatory requirements for reducing needle stick injuries (NSIs). This article highlights how John Kotter's model for change could help healthcare workers plan for successful and sustained deployment of needle safety devices (NSDs) and ultimately reduce the risk of a NSI.

Miniature stick-packaging--an industrial technology for pre-storage and release of reagents in lab-on-a-chip systems.

Science.gov (United States)

van Oordt, Thomas; Barb, Yannick; Smetana, Jan; Zengerle, Roland; von Stetten, Felix

2013-08-07

Stick-packaging of goods in tubular-shaped composite-foil pouches has become a popular technology for food and drug packaging. We miniaturized stick-packaging for use in lab-on-a-chip (LOAC) systems to pre-store and on-demand release the liquid and dry reagents in a volume range of 80-500 μl. An integrated frangible seal enables the pressure-controlled release of reagents and simplifies the layout of LOAC systems, thereby making the package a functional microfluidic release unit. The frangible seal is adjusted to defined burst pressures ranging from 20 to 140 kPa. The applied ultrasonic welding process allows the packaging of temperature sensitive reagents. Stick-packs have been successfully tested applying recovery tests (where 99% (STDV = 1%) of 250 μl pre-stored liquid is released), long-term storage tests (where there is loss of only <0.5% for simulated 2 years) and air transport simulation tests. The developed technology enables the storage of a combination of liquid and dry reagents. It is a scalable technology suitable for rapid prototyping and low-cost mass production.

Moiré superlattice-level stick-slip instability originated from geometrically corrugated graphene on a strongly interacting substrate

Science.gov (United States)

Shi, Ruoyu; Gao, Lei; Lu, Hongliang; Li, Qunyang; Ma, Tian-Bao; Guo, Hui; Du, Shixuan; Feng, Xi-Qiao; Zhang, Shuai; Liu, Yanmin; Cheng, Peng; Hu, Yuan-Zhong; Gao, Hong-Jun; Luo, Jianbin

2017-06-01

Two dimensional (2D) materials often exhibit novel properties due to various coupling effects with their supporting substrates. Here, using friction force microscopy (FFM), we report an unusual moiré superlattice-level stick-slip instability on monolayer graphene epitaxially grown on Ru(0 0 0 1) substrate. Instead of smooth friction modulation, a significant long-range stick-slip sawtooth modulation emerges with a period coinciding with the moiré superlattice structure, which is robust against high external loads and leads to an additional channel of energy dissipation. In contrast, the long-range stick-slip instability reduces to smooth friction modulation on graphene/Ir(1 1 1) substrate. The moiré superlattice-level slip instability could be attributed to the large sliding energy barrier, which arises from the morphological corrugation of graphene on Ru(0 0 0 1) surface as indicated by density functional theory (DFT) calculations. The locally steep humps acting as obstacles opposing the tip sliding, originates from the strong interfacial electronic interaction between graphene and Ru(0 0 0 1). This study opens an avenue for modulating friction by tuning the interfacial atomic interaction between 2D materials and their substrates.

Foreshocks during the nucleation of stick-slip instability

Science.gov (United States)

McLaskey, Gregory C.; Kilgore, Brian D.

2013-01-01

We report on laboratory experiments which investigate interactions between aseismic slip, stress changes, and seismicity on a critically stressed fault during the nucleation of stick-slip instability. We monitor quasi-static and dynamic changes in local shear stress and fault slip with arrays of gages deployed along a simulated strike-slip fault (2 m long and 0.4 m deep) in a saw cut sample of Sierra White granite. With 14 piezoelectric sensors, we simultaneously monitor seismic signals produced during the nucleation phase and subsequent dynamic rupture. We observe localized aseismic fault slip in an approximately meter-sized zone in the center of the fault, while the ends of the fault remain locked. Clusters of high-frequency foreshocks (Mw ~ −6.5 to −5.0) can occur in this slowly slipping zone 5–50 ms prior to the initiation of dynamic rupture; their occurrence appears to be dependent on the rate at which local shear stress is applied to the fault. The meter-sized nucleation zone is generally consistent with theoretical estimates, but source radii of the foreshocks (2 to 70 mm) are 1 to 2 orders of magnitude smaller than the theoretical minimum length scale over which earthquake nucleation can occur. We propose that frictional stability and the transition between seismic and aseismic slip are modulated by local stressing rate and that fault sections, which would typically slip aseismically, may radiate seismic waves if they are rapidly stressed. Fault behavior of this type may provide physical insight into the mechanics of foreshocks, tremor, repeating earthquake sequences, and a minimum earthquake source dimension.

78 FR 76248 - Special Conditions: Airbus, Model A350-900 Series Airplane; Side Stick Controller

Science.gov (United States)

2013-12-17

... one hand. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards...-hand operation by wrist and not by arms. Discussion Special conditions for Airbus side stick...

METODE TALKING STICK DENGAN MEDIA AUDIO UNTUK MENINGKATKAN MOTIVASI BELAJAR SISWA PADA MATA PELAJARAN STENOGRAFI

Directory of Open Access Journals (Sweden)

Wahyuni Sri Utami

2015-03-01

Full Text Available Stenography learning in class X Office Administration 3 at SMK Negeri 1Pemalang indicated the low learning motivation. The purpose of this research was toknow the students’ learning motivation improvement after using talking stick methodwith audio media at Stenography subject in class X Office Administration at SMK N 1Pemalang. It was a classroom action research conducted in three cycles which eachcycle was consisted of planning, implementation, observation, and reflection. The datawere collected by observation and test. Then, the data were analyzed by percentagedescriptive. The results showed that talking stick method with audio media can improvestudents' motivation at Stenography subject in class X Office Administration 3 at SMKN 1 Pemalang. The average of students’ motivation on the first cycle was 63.08%, thenincreased up to 72.08% on the second cycle and finally, it went up to 85.08% on thethird cycle.

Novel hockey-stick mesogens with the nematic, synclinic and anticlinic smectic C phase sequence

Czech Academy of Sciences Publication Activity Database

Novotná, Vladimíra; Žurek, J.; Kozmik, V.; Svoboda, J.; Glogarová, Milada; Kroupa, Jan; Pociecha, D.

2008-01-01

Roč. 35, č. 8 (2008), 1023-1036 ISSN 0267-8292 R&D Projects: GA AV ČR IAA100100710 Institutional research plan: CEZ:AV0Z10100520 Keywords : liquid crystals * synclinic and anticlinic ordering * hockey-stick mezogens Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.132, year: 2008

MolPrint3D: Enhanced 3D Printing of Ball-and-Stick Molecular Models

Science.gov (United States)

Paukstelis, Paul J.

2018-01-01

The increased availability of noncommercial 3D printers has provided instructors and students improved access to printing technology. However, printing complex ball-and-stick molecular structures faces distinct challenges, including the need for support structures that increase with molecular complexity. MolPrint3D is a software add-on for the…

"Sticking Together": The Adolescent Experience of the Cohesion Process in Rural School Counseling Groups

Science.gov (United States)

Gray, Tara M.; Rubel, Deborah

2018-01-01

The purpose of this study was to develop a grounded theory of how adolescents experience the cohesion process in rural school counseling groups. A total of 20 individual interviews with 7 participants were conducted. Data analysis generated the central category of the cohesion process as "sticking together," which describes a "tight…

Study on adsorption behavior of radioiodine gas using incense stick aerosol

International Nuclear Information System (INIS)

Murata, Mikio; Noguchi, Hiroshi; Kato, Shohei; Kokubu, Morinobu

1987-01-01

Adsorption of radioactive elemental iodine gas ( 131 I 2 ) on incense stick aerosol particles has been studied to provide basic data for a realistic and precise assessment of dose to the public due to radioiodine released from nuclear facilities. A mixture of iodine gas and aerosol was passed once through a glass vessel to cause the adsorption reaction. The adsorption was studied at different reaction times, initial I 2 gas concentrations and particle number concentrations. The results showed that the adsorption reached an equilibrium in about 2 min at the initial I 2 gas concentration of 10 -10 g/cm 3 . The proportion of iodine adsorbed by the aerosol particles was almost constant, about 25 % at the initial I 2 gas concentrations below 10 -11 g/cm 3 and at the reaction time of 1 min, and decreased with increase of the initial concentration over 10 -11 g/cm 3 . The adsorption isotherm of the aerosol for the gas was obtained from the experimental data. The semi-empirical equations to explain the adsorption reaction were also obtained based on the experimental data and the FUCHS's equation relating to vaporization of a droplet. The sticking probability in the equations was estimated to be 7.6 x 10 -3 . The calculated results using the equations were in good agreement with the experimental ones. (author)

Reticulate evolution in stick insects: the case of Clonopsis (Insecta Phasmida).

Science.gov (United States)

Milani, Liliana; Ghiselli, Fabrizio; Pellecchia, Marco; Scali, Valerio; Passamonti, Marco

2010-08-25

Phasmids show noteworthy abilities to overcome species-specific reproductive isolation mechanisms, including hybridization, polyploidy, parthenogenesis, hybridogenesis and androgenesis. From an evolutionary standpoint, such tangled reproductive interactions lead to the complex phyletic relationships known as "reticulate evolution". Moroccan stick insects of the genus Clonopsis include one bisexual (C. felicitatis) and two closely related parthenogenetic forms (C. gallica, C. soumiae), which represent a polyploid series in chromosome number, but with apparent diploid karyotypes. Moreover, two Clonopsis strains of ameiotic males have been described, C. androgenes-35 and C. androgenes-53. As a consequence, Clonopsis stick insects may have experienced complex micro-evolutionary events, which we try to disentangle in this study. Mitochondrial cox2 analysis supports a recent divergence of Clonopsis, while AFLPs evidence genetic differentiation not linked to karyotypes, so that parthenogenetic C. gallica and C. soumiae appear to be a mix of strains of polyphyletic origin rather than single parthenogenetic species. Moreover, an admixed hybrid origin seems to be confirmed for C. androgenes. On the whole, Clonopsis is an intriguing case of reticulate evolution. Actually, complex cladogenetic events should be taken into account to explain the observed genetic structure, including diploidization of polyploid karyotypes, possibly coupled with hybridization and androgenesis. We also proposed a "working hypothesis" to account for the observed data, which deserves further studies, but fits the observed data very well.

Micro transflection on a metallic stick: an innovative approach of reflection infrared spectroscopy for minimally invasive investigation of painting varnishes.

Science.gov (United States)

Rosi, Francesca; Legan, Lea; Miliani, Costanza; Ropret, Polonca

2017-05-01

A new analytical approach, based on micro-transflection measurements from a diamond-coated metal sampling stick, is presented for the analysis of painting varnishes. Minimally invasive sampling is performed from the varnished surface using the stick, which is directly used as a transflection substrate for micro Fourier transform infrared (FTIR) measurements. With use of a series of varnished model paints, the micro-transflection method has been proved to be a valuable tool for the identification of surface components thanks to the selectivity of the sampling, the enhancement of the absorbance signal, and the easier spectral interpretation because the profiles are similar to transmission mode ones. Driven by these positive outcomes, the method was then tested as tool supporting noninvasive reflection FTIR spectroscopy during the assessment of varnish removal by solvent cleaning on paint models. Finally, the integrated analytical approach based on the two reflection methods was successfully applied for the monitoring of the cleaning of the sixteenth century painting Presentation in the Temple by Vittore Carpaccio. Graphical Abstract Micro-transflection FTIR on a metallic stick for the identification of varnishes during painting cleanings.

PERBEDAAN HASIL BELAJAR SISWA MENGGUNAKAN MODEL PEMBELAJARAN TIPE TALKING STICK DENGAN PEMBELAJARAN KONVENSIONAL PADAMATA PELAJARAN EKONOMI SISWA KELAS X SMAN 1 BONJOL KABUPATEN PASAMAN

Directory of Open Access Journals (Sweden)

Cici Idrus

2013-10-01

Full Text Available Riset didasari oleh hasil belajar ekonomi kelas X SMAN 1 Bonjol yang masih rendah, yang masih memakai metode Teacher Center Learning, sehingga para siswa kurang aktifi dan kreatif. Satu usaha untuk meningkatkan hasil pelajaran siswa adalah dengan menerapkan jenis model pelajaran ekonomi Talking Stick. Tujuan Studi ini untuk menentukan perbedaan antara hasil belajar menggunakan metode Talking Stick dan konvensional pada kelas X SMAN 1 Bonjol. Riset ini adalah semacam eksperimen. Populasi Studi adalah suatu para siswa nilai/kelas X Sma Negeri 1 Bonjol, sedangkan kelas X3 menggunakan jenis model pelajaran Talking Stick sebagai kelas eksperimen dan X4 Kelas sebagai kelas yag dikendalikan dengan metode konvensional. Hasil menunjukkan rata-rata hasil belajar kelas eksperimen lebih tinggi( 79.62 dibanding kelas kontrol ( 73.21. Pada hasil pengujian hipotesis yang menggunakan SPSS versi 16. nilai yang diperoleh t= 2.892 dan t tabel= 1.671 maka> ttable kemudian Tolak H0 dan menerima H1. Maka dapat disimpulkan bahwa Ada perbedaan penting pada hasil pelajaran siswa yang menggunakan tipe Talking Stick dan konvensional pada mata pelajaran ekonomi kelas X SMAN 1 Bonjol.

Vessel Enhancement and Segmentation of 4D CT Lung Image Using Stick Tensor Voting

Science.gov (United States)

Cong, Tan; Hao, Yang; Jingli, Shi; Xuan, Yang

2016-12-01

Vessel enhancement and segmentation plays a significant role in medical image analysis. This paper proposes a novel vessel enhancement and segmentation method for 4D CT lung image using stick tensor voting algorithm, which focuses on addressing the vessel distortion issue of vessel enhancement diffusion (VED) method. Furthermore, the enhanced results are easily segmented using level-set segmentation. In our method, firstly, vessels are filtered using Frangi's filter to reduce intrapulmonary noises and extract rough blood vessels. Secondly, stick tensor voting algorithm is employed to estimate the correct direction along the vessel. Then the estimated direction along the vessel is used as the anisotropic diffusion direction of vessel in VED algorithm, which makes the intensity diffusion of points locating at the vessel wall be consistent with the directions of vessels and enhance the tubular features of vessels. Finally, vessels can be extracted from the enhanced image by applying level-set segmentation method. A number of experiments results show that our method outperforms traditional VED method in vessel enhancement and results in satisfied segmented vessels.

Orientation with a Viking sun-compass, a shadow-stick, and two calcite sunstones under various weather conditions.

Science.gov (United States)

Bernáth, Balázs; Blahó, Miklós; Egri, Adám; Barta, András; Kriska, György; Horváth, Gábor

2013-09-01

It is widely accepted that Vikings used sun-compasses to derive true directions from the cast shadow of a gnomon. It has been hypothesized that when a cast shadow was not formed, Viking navigators relied on crude skylight polarimetry with the aid of dichroic or birefringent crystals, called "sunstones." We demonstrate here that a simple tool, that we call "shadow-stick," could have allowed orientation by a sun-compass with satisfying accuracy when shadows were not formed, but the sun position could have reliably been estimated. In field tests, we performed orientation trials with a set composed of a sun-compass, two calcite sunstones, and a shadow-stick. We show here that such a set could have been an effective orientation tool for Vikings only when clear, blue patches of the sky were visible.

Waffle production: influence of batter ingredients on sticking of waffles at baking plates-Part II: effect of fat, leavening agent, and water.

Science.gov (United States)

Huber, Regina; Schoenlechner, Regine

2017-05-01

Fresh egg waffles are continuously baked in tunnel baking ovens in industrial scale. Waffles that partly or fully stick to the baking plates cause significant product loss and increased costs. The aim of this study was, therefore, to investigate the effect of different recipe ingredients on the sticking behavior of waffles. In this second part, ingredients investigated were different leavening agents (sodium acid pyrophosphate, ammonium bicarbonate, magnesium hydroxide carbonate, or monocalcium phosphate), different fat sources (rapeseed oil, cocos fat, butter, or margarine), and different water sources (tap water 12°dH and distilled water). Within the different types of fats, solid fats with high amount of short-chain fatty acids (cocos fat or butter) decreased the number of sticking waffles compared to liquid oils (rapeseed oil). Regarding leavening agents, magnesium hydroxide carbonate and ammonium bicarbonate were superior to sodium acid pyrophosphate or monocalcium phosphate. Between the two water sources, effects were small.

78 FR 67077 - Special Conditions: Airbus, Model A350-900 Series Airplane; Side Stick Controllers

Science.gov (United States)

2013-11-08

... adequacy under section 611 of Public Law 92-574, the ``Noise Control Act of 1972.'' The FAA issues special... crew. 3. Pilot control: It must be shown by flight tests that the use of side stick controllers does... and roll control instead of conventional wheels and columns. The applicable airworthiness regulations...

Epidemiology of Injuries in Women Playing Competitive Team Bat-or-Stick Sports: A Systematic Review and a Meta-Analysis.

Science.gov (United States)

Panagodage Perera, Nirmala Kanthi; Joseph, Corey; Kemp, Joanne Lyn; Finch, Caroline Frances

2018-03-01

Team bat-or-stick sports, including cricket, softball and hockey, are popular among women. However, little is known about the injury profile in this population. The aim was to describe the incidence, nature and anatomical location of injuries in bat-or-stick sports played by women in a competitive league. This review was prospectively registered (PROSPERO CRD42015026715). CINAHL, MEDLINE, PsycINFO, PubMed, SPORTDiscus were systematically searched from January 2000 to September 2016, inclusive. Peer-reviewed original research articles reporting the incidence, nature and anatomical location of injuries sustained by women aged 18 + years in competitive bat-or-stick sports were included. Two meta-analyses based on injury incidence proportions (injury IP) and injury rates per 1000 person-days of athletic exposure (AE) were performed. A total of 37 studies satisfied the inclusion criteria, and five had low risk of bias. The weighted injury IP was 0.42 [95% confidence interval (CI) 0.39-0.45]. The weighted injury rate was 6.12 (95% CI 6.05-6.18) overall, and greater in games [15.79 (95% CI 15.65-15.93)] than in practice [3.07 (95% CI 2.99-3.15)]. The ankle was the most commonly injured anatomical location, followed by the hand (including wrist and fingers), knee and head. Soft tissue and ligament injuries were most common types of injuries. Injury prevention in women's sports is a novel and emerging field of research interest. This review highlights that injury incidence is high among female bat-or-stick players, but little information is known about direct causal mechanisms. This review clearly establishes the need for enhancements to injury data collection. Without this information, it will not be possible to develop evidence-based injury prevention interventions.

Pyothorax induced by an intrathoracic foreign body in a miniature dachshund: Migration of a popsicle stick from the stomach.

Science.gov (United States)

Choi, Yi-Don; Han, Hyun-Jung

2017-08-10

A four-year-old dachshund presented with a two-week history of pyrexia, depression, and cough. Four months earlier, the owner observed the dog swallow a whole popsicle stick, but the animal showed no clinical signs at that time. Radiography, ultrasonography, and computed tomography confirmed an intrathoracic linear foreign body and pleural effusion in the right thorax. The pleural fluid was bloody and purulent, and contained inflammatory cells and Escherichia coli. The dog was diagnosed with pyothorax induced by a foreign body, and was treated successfully by surgical removal of the foreign body, partial lung lobectomy, thoracic lavage, and antibiotics. The foreign body was identified as a popsicle stick that the dog had eaten.

The diversity of stick insects (phasmatodea) on Gunung Jerai, Kedah

Science.gov (United States)

Rabihah, I.; Lailatul-Nadhirah, A.; Azman, S.

2018-04-01

A total of 14 stick insects species from 11 genera under 4 families (Aschiphasmatidae: one species in one genus; Heteronemiidae, 10 species in 7 genera; Phasmatidae: two species in two genera; Bacillidae: one species in one genus) was recorded for Gunung Jerai, Kedah. This was based on 86 individuals obtained through five sampling occasions in December 2016 until April 2017, by active searching using high intensity LED torch lights at three sampling locations down the trails starting at (L1: 1130m; L2: 800m; L3: 230m) that were selected based on altitudes. The most common and abundant species in L1 is Abrosoma festinatum Brock & Seow-Choen. Lopaphus iolas (Westwood) appeared as the most common and abundant species in L2, represented by 5 individuals which covers 31.25 % of the total collected specimen in that area. In L3, Lopaphus iolas (Westwood) is also appeared as the most abundant species represented by 6 individuals or 54.54 %. Shannon's Species Diversity Index (H') in L2 was the highest (H'=1.836) followed by L3 (H'=1.295) and L1 (H'=1.264), and the evenness index in L2 was the highest (E= 0.7843), followed by L3 (E= 0.7229), and L1 (E= 0.4424). Margalef Species Richness Index in L2 was the highest (R'=2.525), followed by L1 (R'=1.717) and L3 (R'=1.668). It can be summarized that L2 at the altitude 800m appear as the best sampling site for stick insects species in Gunung Jerai, Kedah with the highest value of species diversity and richness index.

SenStick: Comprehensive Sensing Platform with an Ultra Tiny All-In-One Sensor Board for IoT Research

Directory of Open Access Journals (Sweden)

Yugo Nakamura

2017-01-01

Full Text Available We propose a comprehensive sensing platform called SenStick, which is composed of hardware (ultra tiny all-in-one sensor board, software (iOS, Android, and PC, and 3D case data. The platform aims to allow all the researchers to start IoT research, such as activity recognition and context estimation, easily and efficiently. The most important contribution is the hardware that we have designed. Various sensors often used for research are embedded in an ultra tiny board with the size of 50 mm (W × 10 mm (H × 5 mm (D and weight around 3 g including a battery. Concretely, the following sensors are embedded on this board: acceleration, gyro, magnetic, light, UV, temperature, humidity, and pressure. In addition, this board has BLE (Bluetooth low energy connectivity and capability of a rechargeable battery. By using 110 mAh battery, it can run more than 15 hours. The most different point from other similar boards is that our board has a large flash memory for logging all the data without a smartphone. By using SenStick, all the users can collect various data easily and focus on IoT data analytics. In this paper, we introduce SenStick platform and some case studies. Through the user study, we confirmed the usefulness of our proposed platform.

STUDI KOMPARATIF MODEL PEMBELAJARAN TALKING STICK DAN SNOWBALL THROWING TERHADAP HASIL BELAJAR TEKNOLOGI INFORMASI DAN KOMUNIKASI (TIK SISWA KELAS XI SMA NEGERI 1 SERIRIT TAHUN AJARAN 2015/2016

Directory of Open Access Journals (Sweden)

Ni Made Dwi Antari

2016-10-01

Abstract TIK learning must have to prepared student’s activities and creativities to obtained the own knowledge by means of learning process. An appropriate learning model election agree with students characteristics would help an success learning. The comparative study research would have to compared both of learning model, to know which model was better. This research aimed to know (1 The influenced about the result of students’ TIK study used Talking stick and Snowball Throwing learning model (2 the highest result of study between Talking stick and Snowball Throwing learning model (3 the students’ response toward Talking stick and Snowball Throwing learning model application. Kind of this research was quasi experiment by Post Test Only with Non Equivalent Control Group Design. The data accumulation done by multiple choice tests to measured cognitive domain and skill test to psychomotor domain. The students’ result study analyzed by prerequisite test was normality test and homogeneity by the result of the three group which normal distribution and homogeneous, continued by hypothesis test used a strip Anova then continued by t-Sheffe The result of one way onova exist a significance influenced on the used of Talking Stick leaarning model, Snowball Throwing and conventional. Because of thee was a significance difereences between each partner. Afterwards, seen from the result average of study  can be concluded the Talking Stick learning model better than the higest result average of study. Meanwhile, the respond of used questionnaire method, the result of Talking stick model questionnaire known 36% very positive responses, 61% positive responses and 3% positive sufficient responses. Then, Snowball Throwing model known 25% very positive responses, 67% positive responses, and 8% positive sufficient responses.   Keywords : The Comparrative Study, TIK, Talking stick, Snowball Throwing, the                    study result,  students’ respond

Identification, rearing, and distribution of stick insects of Madeira Island: an example of raising biodiversity awareness.

Science.gov (United States)

Aguiar, António M F; Pombo, Dora Aguin; Gonçalves, Ysabel M

2014-04-10

Two species of stick insects are currently known to be present in the Macaronesian archipelagos: Clonopsis gallica (Charpentier) (Phasmatodea: Bacillidae) on the Canary Islands and in the Azores and Carausius morosus (Sinéty) (Phasmatidae) in the Azores. Here, we provide the first reliable records of the presence and distribution of C. gallica and C. morosus on Madeira Island. Egg and adult stages are briefly described along with some notes on the life history of these species in captivity. Data on islandwide distribution are based on specimens donated by the public in response to an article published in a daily newspaper. This method of data collection raised great popular interest in stick insects. The role of newspapers as a means of communicating awareness in biodiversity issues is discussed. This is an open access paper. We use the Creative Commons Attribution 3.0 license that permits unrestricted use, provided that the paper is properly attributed.

Stick-slip behavior of Indian gabbro as studied using a NIED large-scale biaxial friction apparatus

Science.gov (United States)

Togo, Tetsuhiro; Shimamoto, Toshihiko; Yamashita, Futoshi; Fukuyama, Eiichi; Mizoguchi, Kazuo; Urata, Yumi

2015-04-01

This paper reports stick-slip behaviors of Indian gabbro as studied using a new large-scale biaxial friction apparatus, built in the National Research Institute for Earth Science and Disaster Prevention (NIED), Tsukuba, Japan. The apparatus consists of the existing shaking table as the shear-loading device up to 3,600 kN, the main frame for holding two large rectangular prismatic specimens with a sliding area of 0.75 m2 and for applying normal stresses σ n up to 1.33 MPa, and a reaction force unit holding the stationary specimen to the ground. The shaking table can produce loading rates v up to 1.0 m/s, accelerations up to 9.4 m/s2, and displacements d up to 0.44 m, using four servocontrolled actuators. We report results from eight preliminary experiments conducted with room humidity on the same gabbro specimens at v = 0.1-100 mm/s and σ n = 0.66-1.33 MPa, and with d of about 0.39 m. The peak and steady-state friction coefficients were about 0.8 and 0.6, respectively, consistent with the Byerlee friction. The axial force drop or shear stress drop during an abrupt slip is linearly proportional to the amount of displacement, and the slope of this relationship determines the stiffness of the apparatus as 1.15 × 108 N/m or 153 MPa/m for the specimens we used. This low stiffness makes fault motion very unstable and the overshooting of shear stress to a negative value was recognized in some violent stick-slip events. An abrupt slip occurred in a constant rise time of 16-18 ms despite wide variation of the stress drop, and an average velocity during an abrupt slip is linearly proportional to the stress drop. The use of a large-scale shaking table has a great potential in increasing the slip rate and total displacement in biaxial friction experiments with large specimens.

Interventions to reduce needle stick injuries at a tertiary care centre

Directory of Open Access Journals (Sweden)

Mehta A

2010-01-01

Full Text Available Background: Occupational exposure to blood/body fluids is associated with risk of infection with blood borne pathogens like human immunodeficiency virus (HIV, hepatitis B virus (HBV and hepatitis C virus (HCV. Materials and Methods: We carefully document needle stick injuries (NSI and implement post-exposure prophylaxis (PEP. We report a four-year continuing surveillance study where 342 healthcare workers (HCWs sustained NSI. PEP was given to HCWs injured from seropositive sources. If the source was HbsAg positive, HCWs were given a hepatitis B immunization booster. If the HCW was antiHBs negative, both hepatitis B immunoglobulin (HBIG and hepatitis B vaccine were administered. For HCWs who sustained injuries from HIV positive sources, antiretroviral therapy was started. Follow-up was done after three and six months of exposure. Recent interventions by the infection control committee at our hospital reduced NSI considerably during intravenous line administration and glucose monitoring. Results and Discussion: Of 342 injuries, 254 were from known sources and 88 from unknown sources. From known sources, 37 were seropositive; 13 for HIV, 15 for HCV, nine for HBV. Sixty six sharp injuries were sustained through garbage bags, 43 during IV line administration, 41 during injection administration, 35 during needle recapping, 32 during blood collection, 27 during blood glucose monitoring, 24 from OT instruments, 17 during needle disposal, 16 while using surgical blade, 7 during suturing and 34 from miscellaneous sources. Conclusion: No case of seroconversion has taken place, so far, as a result of needle stick injuries at our centre.

Development of a New Punch Head Shape to Replicate Scale-Up Issues on a Laboratory Tablet Press III: Replicating sticking phenomenon using the SAS punch and evaluation by checking the tablet surface using 3D laser scanning microscope.

Science.gov (United States)

Ito, Manabu; Aoki, Shigeru; Uchiyama, Jumpei; Yamato, Keisuke

2018-04-20

Sticking is a common observation in the scale-up stage on the punch tip using a commercial tableting machine. The difference in the total compression time between a laboratory and a commercial tableting machine is considered one of the main root causes of scale up issues in the tableting processes. The proposed Size Adjusted for Scale-up (SAS) punch can be used to adjust the consolidation and dwell times for commercial tableting machine. As a result, the sticking phenomenon is able to be replicated at the pilot scale stage. As reported in this paper, the quantification of sticking was measured using a 3D laser scanning microscope to check the tablet surface. It was shown that the sticking area decreased with the addition of magnesium stearate in the formulation, but the sticking depth was not affected by the additional amount of magnesium stearate. It is proposed that use of a 3D laser scanning microscope can be applied to evaluate sticking as a process analytical technology (PAT) tool and so sticking can be monitored continuously without stopping the machine. Copyright © 2018. Published by Elsevier Inc.

Deodorant effects of a sage extract stick: Antibacterial activity and sensory evaluation of axillary deodorancy

Directory of Open Access Journals (Sweden)

Mohammad Ali Shahtalebi

2013-01-01

Full Text Available Background: Deodorant products prevent the growth and activity of the degrading apocrine gland bacteria living in the armpit. Common antibacterial agents in the market like triclosan and aluminum salts, in spite of their suitable antibacterial effects, increase the risk of Alzheimer′s disease, breast and prostate cancers or induce contact dermatitis. Therefore, plant extracts possessing antibacterial effects are of interest. The aim of the present study was to verify the in vitro antimicrobial effects of different sage extracts against two major bacteria responsible for axillary odor, and to evaluate the deodorant effect of a silicon-based stick containing sage extracts in different densities in humans. Materials and Methods: Different fractions of methanolic extract of Salvia officinalis (sage were evaluated on a culture of armpit skin surface of volunteers through agar microdilution antimicrobial assay. Then, randomized, double-blind placebo-controlled clinical trial with the best antibacterial fraction was conducted on 45 female healthy volunteers. Participants were treated with a single dose in four groups, each containing 15 individuals: Group 1 (200 μg/mL, 2 (400 μg/mL, 3 (600 μg/mL of dichloromethane sage extract, and placebo (without extract. A standard sensory evaluation method for the evaluation of deodorant efficacy was used before, and two hours, four hours, and eight hours after single application of a deodorant or placebo (ASTM method E 1207-87 Standard Practice for the Sensory Evaluation of Axillary Deodorancy. Results: The data were analyzed with two factors relating to densities and time. In 45 participants with a mean [± standard deviation (SD] age of 61.5±11.8 years, statistically significant within-group differences were observed before and two, four, and eight hours after deodorant treatment for groups 1, 2, and 3. Groups 1, 2, and 3 had a significantly smaller odor score than placebo after two, four, and eight hours

Colonic, ureteral, and vascular injuries secondary to stick impalement in a dog.

Science.gov (United States)

Menard, Julie; Schoeffler, Gretchen L

2011-08-01

To report the surgical repair, case management, and outcome of a dog with sepsis and severe intraabdominal trauma secondary to a penetrating stick injury. A 1.5-year-old, spayed female, mixed-breed dog was presented to the emergency service after incurring a small laceration on the medial aspect of the left pelvic limb while running in the woods. The wound was surgically explored and a primary closure achieved. The patient was discharged the same day with oral antimicrobial therapy. The following morning the dog was represented to the emergency service for acute vomiting. Abdominal radiographs were performed and demonstrated loss of serosal detail and pneumoperitoneum. An emergency celiotomy was performed and revealed distal colonic perforation, left ureteral laceration, and lacerations of the left common iliac vein. Ureteronephrectomy, as well as primary closure of the distal colonic perforation and left common iliac vein lacerations, were performed. The patient recovered and was ultimately discharged from the hospital 5 days later. Follow-up 1 year later revealed no significant physical exam or biochemical abnormalities. A seemingly benign penetrating stick injury initially deemed to be superficial in nature was later demonstrated to have resulted in sepsis following severe intraabdominal trauma that included lacerations of the distal colon, left ureter, and left common iliac vein in a dog. Successful surgical management and intensive care led to a full recovery without any residual impairment noted a year later. © Veterinary Emergency and Critical Care Society 2011.

Green-fuel-mediated synthesis of self-assembled NiO nano-sticks for dual applications—photocatalytic activity on Rose Bengal dye and antimicrobial action on bacterial strains

Science.gov (United States)

Iyyappa Rajan, P.; Vijaya, J. Judith; Jesudoss, S. K.; Kaviyarasu, K.; Kennedy, L. John; Jothiramalingam, R.; Al-Lohedan, Hamad A.; Vaali-Mohammed, Mansoor-Ali

2017-08-01

With aim of promoting the employability of green fuels in the synthesis of nano-scaled materials with new kinds of morphologies for multiple applications, successful synthesis of self-assembled NiO nano-sticks was achieved through a 100% green-fuel-mediated hot-plate combustion reaction. The synthesized NiO nano-sticks show excellent photocatalytic activity on Rose Bengal dye and superior antibacterial potential towards both Gram-positive and Gram-negative bacteria.

Limited Investigation of the Effects of Elevator Rate Limiting and Stick Dynamics on Longitudinal Pilot Induced Oscillations (HAVE GRIP)

National Research Council Canada - National Science Library

Peters, Patrick

1996-01-01

This report presents the results of the HAVE GRIP flight test program. This program performed a limited investigation of the effects of stick dynamics and elevator rate limiting on longitudinal pilot induced oscillations (PIOs...

Mobilizing cities towards a low-carbon future: Tambourines, carrots and sticks

International Nuclear Information System (INIS)

Azevedo, Isabel; Delarue, Erik; Meeus, Leonardo

2013-01-01

In the transition towards a low-carbon future in Europe, cities' actions are of major importance due to the prominence of urbanization, both in terms of population and in terms of greenhouse gas (GHG) emissions. As a result, we need city authorities to act, by using their competences as policy makers as well as energy users. However, cities are still not moving as fast as one might expect, indicating the need for additional incentives to prompt local action. Therefore, the aim of this paper is to present an overview of external incentives that might prompt cities to act and to highlight good practices that could be used in future initiatives. This paper first discusses how to evaluate the climate and energy performance of a city and how local authorities can contribute to its improvements. Moreover, it analyses the disincentives that local governments are confronted with, categorizing them as simple market failures, institutional failures and multi-agent failures. The paper then presents a survey of initiatives at national and EU levels to promote local action towards a low-carbon future; grouping them into tambourines, carrots and sticks. We focus on Austria, Germany, the Netherlands and Sweden because they are pioneering countries regarding energy policies for cities. - Highlights: • CO 2 and energy consumption could be used to evaluate the performance of cities. • Simple market, institutional and multi-agent failures are hampering local action. • National and EU actions use mainly tambourines and carrots, rather than sticks. • Covenant of Mayors is one of the most noteworthy tambourine type of instruments. • Carrots notable features are: use of competition and involvement of third-parties

Lifted graphene nanoribbons on gold: from smooth sliding to multiple stick-slip regimes

OpenAIRE

Gigli, Lorenzo; Manini, Nicola; Tosatti, Erio; Guerra, Roberto; Vanossi, Andrea

2018-01-01

Graphene nanoribbons (GNRs) physisorbed on a Au(111) surface can be picked up, lifted at one end, and made slide by means of the tip of an atomic-force microscope. The dynamical transition from smooth sliding to multiple stick-slip regimes, the pushing/pulling force asymmetry, the presence of pinning, and its origin are real frictional processes in a nutshell, in need of a theoretical description. To this purpose, we conduct classical simulations of frictional manipulations for GNRs up to 30 ...

Vanishing stick-slip friction in few-layer graphenes: the thickness effect.

Science.gov (United States)

Xu, Liang; Ma, Tian-Bao; Hu, Yuan-Zhong; Wang, Hui

2011-07-15

We report the thickness dependence of intrinsic friction in few-layer graphenes, adopting molecular dynamics simulations. The friction force drops dramatically with decreasing number of layers and finally approaches zero with two or three layers. The results, which are robust over a wide range of temperature, shear velocity, and pressure are quantitatively explained by a theoretical model with regard to lateral stiffness, slip length, and maximum lateral force, which could provide a new conceptual framework for understanding stick-slip friction. The results reveal the crucial role of the dimensional effect in nanoscale friction, and could be helpful in the design of graphene-based nanodevices.

New lumped-mass-stick model based on modal characteristics of structures: development and application to a nuclear containment building

Science.gov (United States)

Roh, Hwasung; Lee, Huseok; Lee, Jong Seh

2013-06-01

In this study, a new lumped-mass-stick model (LMSM) is developed based on the modal characteristics of a structure such as eigenvalues and eigenvectors. The simplified model, named the "frequency adaptive lumped-massstick model," hasonly a small number of stick elements and nodes to provide the same natural frequencies of the structure and is applied to a nuclear containment building. To investigate the numerical performance of the LMSM, a time history analysis is carried out on both the LMSM and the finite element model (FEM) for a nuclear containment building. A comparison of the results shows that the dynamic responses of the LMSM in terms of displacement and acceleration are almost identical to those of the FEM. In addition, the results in terms of fl oor response spectra at certain elevations are also in good agreement.

Strain, size and composition of InAs quantum sticks, embedded in InP, determined via X-ray anomalous diffraction and diffraction anomalous fine structure in grazing incidence

International Nuclear Information System (INIS)

Letoublon, A.; Favre-Nicolin, V.; Renevier, H.; Proietti, M.G.; Monat, C.; Gendry, M.; Marty, O.; Priester, C.

2005-01-01

We report on the study of strain, size and composition of small-size encapsulated semiconductor nanostructures. We show that the partial structure factor of As atoms in InAs stick-like nanostructures (quantum sticks), embedded in InP, can be directly extracted from grazing incidence anomalous X-ray diffraction maps at the As K-edge. We have recovered the average height and strain of the islands and determined their composition. The average height of the quantum sticks (QSs), as deduced from the width of the structure factor profile is 2.54 nm. The InAs out of plane deformation, relative to InP, is equal to 6.1%. Fixed-Q anomalous diffraction spectra, measured at the As K-edge, in grazing incidence provide clear evidence of pure InAs QSs. This is confirmed by the analysis of the diffraction anomalous fine structure (DAFS) that also gives a direct way to recover the strain accomodation inside the quantum sticks. Finite difference method calculations reproduce well the diffraction data. Chemical mixing at interfaces is at most 1 ML. This paper shows that ultimate application of anomalous diffraction and DAFS together with reciprocal space maps is a powerful method to sudy the structural properties of nanostructures

Evaluation of Aution Max AX-4030 and 9UB Uriflet, 10PA Aution Sticks urine dipsticks in the automated urine test strip analysis.

Science.gov (United States)

Rota, Cristina; Biondi, Marco; Trenti, Tommaso

2011-09-26

Aution Max AX-4030, a test strip analyzer recently introduced to the market, represents an upgrade of the Aution Max AX-4280 widely employed for urinalysis. This new instrument model can allocate two different test strips at the same time. In the present study the two instruments have been compared together with the usage of Uriflet 9UB and the recently produced Aution Sticks 10PA urine strips, the latter presenting an additional test area for the measurement of urinary creatinine. Imprecision and correlation between instruments and strips have been evaluated for chemical-physical parameters. Accuracy was evaluated for protein, glucose and creatinine by comparing the semi-quantitative results to those obtained by quantitative methods. The well-known interference effect of high ascorbic acid levels on urine glucose test strip determination was evaluated, ascorbic acid influence was also evaluated on protein and creatinine determination. The two instruments have demonstrated comparable performances: precision and correlation between instruments and strips, evaluated for chemical-physical parameters, were always good. Furthermore, accuracy was always very good: results of protein and glucose semi-quantitative measurements resulted to be highly correlated with those obtained by quantitative methods. Moreover, the semi-quantitative measurements of creatinine, employing Aution Sticks 10PA urine strips, were highly comparable with quantitative results. 10PA urine strips are eligible for urine creatinine determination with the possibility of correcting urinalysis results for urinary creatinine concentration, whenever necessary and calculating the protein creatinine ratio. Further studies should be carried out to evaluate effectiveness and appropriateness of the usage of creatinine semi-quantitative analysis.

[Comparison of clinical effects of Co-Cr alloy cast post-core and everStick fiber post in restoration of labially or lingually inclined maxillary central incisor].

Science.gov (United States)

Qian, Yu-Mei; Zhong, Qun; Chen, Shuang

2017-02-01

To compare the clinical effect of Co-Cr alloy cast post-core and everStick fiber post in restoration of maxillary central incisor with labial or lingual inclination, and provide theoretical basis for clinical application. Ninety-seven labially or lingually inclined maxillary central incisors were treated in our hospital from March 2012 to March 2014. The patients were randomly divided into group A (n=49) and group B (n=48), and received post -core and crown restoration. Patients in group A underwent Co-Cr alloy cast post and core restoration and patients in group B underwent everStick fiber post and core restoration. After two-year of follow-up, root fracture, post break, crown or post dislodgment and gingival marginal discoloration were recorded and analyzed using SPSS 19.0 software package. Chi-square test showed that the success rate of restoration was significantly different between 2 groups (P<0.05). The incidence of root fracture and gingival marginal discoloration of Co-Cr alloy cast post-core was higher than that of everStick fiber post, but there was no significant difference in the incidence of post break, crown or post dislodgment. EverStick fiber post is better than Co-Cr alloy cast post and core to prevent root fracture and gingival marginal discoloration. Its fracture pattern is repairable and favorable for preserving tooth.

Recognition of tennis serve performed by a digital player: comparison among polygon, shadow, and stick-figure models.

Directory of Open Access Journals (Sweden)

Hirofumi Ida

Full Text Available The objective of this study was to assess the cognitive effect of human character models on the observer's ability to extract relevant information from computer graphics animation of tennis serve motions. Three digital human models (polygon, shadow, and stick-figure were used to display the computationally simulated serve motions, which were perturbed at the racket-arm by modulating the speed (slower or faster of one of the joint rotations (wrist, elbow, or shoulder. Twenty-one experienced tennis players and 21 novices made discrimination responses about the modulated joint and also specified the perceived swing speeds on a visual analogue scale. The result showed that the discrimination accuracies of the experienced players were both above and below chance level depending on the modulated joint whereas those of the novices mostly remained at chance or guessing levels. As far as the experienced players were concerned, the polygon model decreased the discrimination accuracy as compared with the stick-figure model. This suggests that the complicated pictorial information may have a distracting effect on the recognition of the observed action. On the other hand, the perceived swing speed of the perturbed motion relative to the control was lower for the stick-figure model than for the polygon model regardless of the skill level. This result suggests that the simplified visual information can bias the perception of the motion speed toward slower. It was also shown that the increasing the joint rotation speed increased the perceived swing speed, although the resulting racket velocity had little correlation with this speed sensation. Collectively, observer's recognition of the motion pattern and perception of the motion speed can be affected by the pictorial information of the human model as well as by the perturbation processing applied to the observed motion.

Recognition of tennis serve performed by a digital player: comparison among polygon, shadow, and stick-figure models.

Science.gov (United States)

Ida, Hirofumi; Fukuhara, Kazunobu; Ishii, Motonobu

2012-01-01

The objective of this study was to assess the cognitive effect of human character models on the observer's ability to extract relevant information from computer graphics animation of tennis serve motions. Three digital human models (polygon, shadow, and stick-figure) were used to display the computationally simulated serve motions, which were perturbed at the racket-arm by modulating the speed (slower or faster) of one of the joint rotations (wrist, elbow, or shoulder). Twenty-one experienced tennis players and 21 novices made discrimination responses about the modulated joint and also specified the perceived swing speeds on a visual analogue scale. The result showed that the discrimination accuracies of the experienced players were both above and below chance level depending on the modulated joint whereas those of the novices mostly remained at chance or guessing levels. As far as the experienced players were concerned, the polygon model decreased the discrimination accuracy as compared with the stick-figure model. This suggests that the complicated pictorial information may have a distracting effect on the recognition of the observed action. On the other hand, the perceived swing speed of the perturbed motion relative to the control was lower for the stick-figure model than for the polygon model regardless of the skill level. This result suggests that the simplified visual information can bias the perception of the motion speed toward slower. It was also shown that the increasing the joint rotation speed increased the perceived swing speed, although the resulting racket velocity had little correlation with this speed sensation. Collectively, observer's recognition of the motion pattern and perception of the motion speed can be affected by the pictorial information of the human model as well as by the perturbation processing applied to the observed motion.

Cohesion-Induced Stabilization in Stick-Slip Dynamics of Weakly Wet, Sheared Granular Fault Gouge

Science.gov (United States)

Dorostkar, Omid; Guyer, Robert A.; Johnson, Paul A.; Marone, Chris; Carmeliet, Jan

2018-03-01

We use three-dimensional discrete element calculations to study stick-slip dynamics in a weakly wet granular layer designed to simulate fault gouge. The granular gouge is constituted by 8,000 spherical particles with a polydisperse size distribution. At very low liquid content, liquids impose cohesive and viscous forces on particles. Our simulations show that by increasing the liquid content, friction increases and granular layer shows higher recurrence time between slip events. We also observe that slip events exhibit larger friction drop and layer compaction in wet system compared to dry. We demonstrate that a small volume of liquid induces cohesive forces between wet particles that are responsible for an increase in coordination number leading to a more stable arrangement of particles. This stabilization is evidenced with 2 orders of magnitude lower particle kinetic energy in wet system during stick phase. Similar to previous experimental studies, we observe enhanced frictional strength for wet granular layers. In experiments, the physicochemical processes are believed to be the main reason for such behavior; we show, however, that at low confining stresses, the hydromechanical effects of induced cohesion are sufficient for observed behavior. Our simulations illuminate the role of particle interactions and demonstrate the conditions under which induced cohesion plays a significant role in fault zone processes, including slip initiation, weakening, and failure.

Role of Salvadora persica chewing stick (miswak): A natural toothbrush for holistic oral health

OpenAIRE

Niazi, Fayez; Naseem, Mustafa; Khurshid, Zohaib; Zafar, Muhammad S.; Almas, Khalid

2016-01-01

From an ancient tool to a modern way of improving oral health, miswak (chewing stick) has proven to be an effective tool for oral health. The miswak removes the bacterial plaque by mechanical and chemical actions. It provides a cheap and easily accessible way of improving oral health of the individuals and populations. The use of miswak was promoted centuries ago by Prophet Muhammad (Peace be Upon Him). In the modern era, the beneficial role of using miswak such as antiseptic, antimicrobial, ...

[Clinical study of cervical spondylotic radiculopathy treated with massage therapy combined with Magnetic sticking therapy at the auricular points and the cost comparison].

Science.gov (United States)

Wang, Saina; Sheng, Feng; Pan, Yunhua; Xu, Feng; Wang, Zhichao; Cheng, Lei

2015-08-01

To compare the clinical efficacy on cervical spondylotic radiculopathy between the combined therapy of massage and magnetic-sticking at the auricular points and the simple massage therapy, and conduct the health economics evaluation. Seventy-two patients of cervical spondylotic radiculopathy were randomized into a combined therapy group, and a simple massage group, 36 cases in each one. Finally, 35 cases and 34 cases were met the inclusive criteria in the corresponding groups separately. In the combined therapy group, the massage therapy and the magnetic sticking therapy at auricular points were combined in the treatment. Massage therapy was mainly applied to Fengchi (GB 20), Jianjing (GB 21), Jianwaishu (SI 14), Jianyu (LI 15) and Quchi (LI 11). The main auricular points for magnetic sticking pressure were Jingzhui (AH13), Gan (On12) Shen (CO10), Shenmen (TF4), Pizhixia (AT4). In the simple massage group, the simple massage therapy was given, the massage parts and methods were the same as those in the combined therapy group. The treatment was given once every two days, three times a week, for 4 weeks totally. The cervical spondylosis effect scale and the simplified McGill pain questionnaire were adopted to observe the improvements in the clinical symptoms, clinical examination, daily life movement, superficial muscular pain in the neck and the health economics cost in the patients of the two groups. The effect was evaluated in the two groups. The effective rate and the clinical curative rate in the combined therapy group were better than those in the control group [100. 0% (35/35) vs 85. 3% (29/34), 42. 9% (15/35) vs 17. 6% (6/34), both Pmassage therapy, the massage therapy combined with magnetic sticking therapy at auricular points achieves the better effect and lower cost in health economics.

Characterization of microsatellite loci in the stick insects Bacillus rossius rossius, Bacillus rossius redtenbacheri and Bacillus whitei (Insecta : Phasmatodea)

DEFF Research Database (Denmark)

Andersen, DH; Pertoldi, C; Loeschcke, V

2005-01-01

Five microsatellite markers were obtained from a dinucleotide enriched genomic library of the stick insect Bacillus rossius rossius. The markers were tested in three species of Bacillus. All loci were polymorphic when tested across species. The number of alleles at each locus was low (maximum four...

Relationship between the frequency magnitude distribution and the visibility graph in the synthetic seismicity generated by a simple stick-slip system with asperities.

Directory of Open Access Journals (Sweden)

Luciano Telesca

Full Text Available By using the method of the visibility graph (VG the synthetic seismicity generated by a simple stick-slip system with asperities is analysed. The stick-slip system mimics the interaction between tectonic plates, whose asperities are given by sandpapers of different granularity degrees. The VG properties of the seismic sequences have been put in relationship with the typical seismological parameter, the b-value of the Gutenberg-Richter law. Between the b-value of the synthetic seismicity and the slope of the least square line fitting the k-M plot (relationship between the magnitude M of each synthetic event and its connectivity degree k a close linear relationship is found, also verified by real seismicity.

Algorithm for prevention of molten steel sticking onto mold in continous casting process

Directory of Open Access Journals (Sweden)

Blažević, D.

2008-01-01

Full Text Available In continuous casting steel production a significant loss reduction – in terms of scrap material, time and money – can be achieved by developing an appropriate algorithm for the prevention of molten steel sticking onto mould. The logic of such algorithm should be simple and manageable to ensure its practical implementation on a computer system via the usage of thermo sensors. This suggests that both the algorithm and the automated data collection can be implemented by means of applicative software. Despite its simplicity, the algorithm should accurately trace physical phenomena in molten steel.

Numerical study on the stick-slip motion of contact line moving on heterogeneous surfaces

Science.gov (United States)

Liu, Ming; Chen, Xiao-Peng

2017-08-01

We present a numerical study of a moving contact line (CL) crossing the intersecting region of hydrophilic and hydrophobic patterns on a solid wall using lattice Boltzmann methods (LBMs). To capture the interface between the two phases properly, we applied a phase field model coupled with the LBM. The evolutions of the CL velocity, dynamic contact angle, and apparent contact angle are analyzed for the so-called "stick" and "slip" processes. In the two processes, the evolution of the quantities follows different rules shortly after the initial quick transition, which is probably caused by finite interfacial thickness or non-equilibrium effects. For the stick process, the CL is almost fixed and energy is extracted from the main flow to rebuild the meniscus' profile. The evolution of the meniscus is mainly governed by mass conservation. The CL is depinned after the apparent contact angle surpasses the dynamic one, which implies that the interfacial segment in the vicinity of contact line is bended. For the slip process, the quantities evolve with features of relaxation. In the microscopic scale, the velocity of the CL depends on the balance between unbalanced Young's capillary force and viscous drag. To predict the apparent contact angle evolution, a model following the dynamics of an overdamped spring-mass system is proposed. Our results also show that the capillary flows in a channel with heterogeneous wall can be described generally with the Poiseuille flow superimposed by the above transient one.

Improved analysis and visualization of friction loop data: unraveling the energy dissipation of meso-scale stick-slip motion

Science.gov (United States)

Kokorian, Jaap; Merlijn van Spengen, W.

2017-11-01

In this paper we demonstrate a new method for analyzing and visualizing friction force measurements of meso-scale stick-slip motion, and introduce a method for extracting two separate dissipative energy components. Using a microelectromechanical system tribometer, we execute 2 million reciprocating sliding cycles, during which we measure the static friction force with a resolution of \

Electricity Submetering on the Cheap: Stick-on Electricity Meters

Energy Technology Data Exchange (ETDEWEB)

Lanzisera, Steven; Lorek, Michael; Pister, Kristofer

2014-08-17

We demonstrate a low-cost, 21 x 12 mm prototype Stick-on Electricity Meter (SEM) to replace traditional in-circuit-breaker-panel current and voltage sensors for building submetering. A SEM sensor is installed on the external face of a circuit breaker to generate voltage and current signals. This allows for the computation of real and apparent power as well as capturing harmonics created by non-linear loads. The prototype sensor is built using commercially available components, resulting in a production cost of under $10 per SEM. With no highvoltage install work requiring an electrician, home owners or other individuals can install the system in a few minutes with no safety implications. This leads to an installed system cost that is much lower than traditional submetering technology.. Measurement results from lab characterization as well as a real-world residential dwelling installation are presented, verifying the operation of our proposed SEM sensor. The SEM sensor can resolve breaker power levels below 10W, and it can be used to provide data for non-intrusive load monitoring systems at full sample rate.

Tactile Reflex Development Through Wing Tsun’s “Sticking Hands” Practice, by Jeff Webb

Directory of Open Access Journals (Sweden)

Jeff Webb

2012-07-01

Full Text Available It was the late Bruce Lee who first demonstrated Wing Tsun gongfu’s “sticking hands” (chi-sau exercise in the US, during the 1964 Long Beach International Karate Championships. Forty-four years later, very few outside of the art truly understand the purpose of chi-sau let alone how it develops tactile reflexes. This article will describe both the fundamental and complex methods of chi-sau training in detail. It will also explain the rationale and theories behind this method as well as discuss a variety of factors that can either improve or retard the acquisition of tactile reflexes.

Commitment with or without a stick of paid work: comparison of paid and unpaid workers in a non-profit organization

NARCIS (Netherlands)

van Vuuren, Hubrecht A.; de Jong, Menno D.T.; Seydel, E.R.

2008-01-01

The aim of this study is to investigate whether nonpaid volunteers have other reasons to be a member of an organization than paid workers. Volunteers are assumed to be hard to manage, because there is no “stick of a paid contract” to keep them in line. Therefore, we studied different dimensions

Innovative Climate Communication Strategies: What Sticks?

Science.gov (United States)

Fitzpatrick, M. F.; Heid, M.; Spanger-Siegfried, E.; Sideris, J.; Sanford, T. J.; Nurnberger, L.; Huertas, A.; Ekwurzel, B.; Cleetus, R.; Cell, K.

2013-12-01

A unique aspect of our work at the Union of Concerned Scientists (UCS) is the melding of scientific research and a robust communications initiative to bring salient information to decision makers and the public. Over the years, we have tried many different strategies to convey complex scientific information in an effective and appealing way, from movie stars to hope psychology, from dire warnings to academic appeals. But now that we are seeing climate impacts locally and climate change is no longer a future reality, what new vision do we need to support ongoing education? In this session we will present some of the techniques we have used to convey climate science concepts including our use of metaphors, data visualization, photography, blogs, social media, video, and public outreach events. Realizing that messages that stick are those that contain powerful narrative and speak to the emotional centers of our brains, we use innovative infographics as well as personal stories to encourage people to care about creating a healthier, cleaner planet. Reaching new audiences using unexpected messengers is a key focus. Some of the questions we will explore are: What metrics can we use to determine the efficacy of these tools? What are the best ways to convey urgency without a sense of hopelessness? How can we improve our communication at a time when action on climate is a necessity? Research shows infographics convey concepts much more easily and quickly than text alone, as our brains are wired to process visual scenes. Making complex scientific information accessible to the non-specialist public involves creativity and excellent data visualization.

The Stick Design Test on the assessment of older adults with low formal education: evidences of construct, criterion-related and ecological validity.

Science.gov (United States)

de Paula, Jonas Jardim; Costa, Mônica Vieira; Bocardi, Matheus Bortolosso; Cortezzi, Mariana; De Moraes, Edgar Nunes; Malloy-Diniz, Leandro Fernandes

2013-12-01

The assessment of visuospatial abilities is usually performed by drawing tasks. In patients with very low formal education, the use of these tasks might be biased by their cultural background. The Stick Design Test was developed for the assessment of this population. We aim to expand the test psychometric properties by assessing its construct, criterion-related and ecological validity in older adults with low formal education. Healthy older adults (n = 63) and Alzheimer's disease patients (n = 92) performed the Stick Design Test, Mini-Mental State Examination, Digit Span Forward and the Clock Drawing Test. Their caregivers answered Personal Care and Instrumental Activities of Daily Living). Construct validity was assessed by factor analysis, convergent correlations (with the Clock Drawing Test), and divergent correlations (with Digit Span Forward); criterion-related validity by receiver operating characteristic curve analysis and binary logistic regression; and Ecological validity by correlations with ADL. The test factor structure was composed by one component (R 2 = 64%). Significant correlations with the Clock Drawing Test and Digit Span Forward were found, and the relationship was stronger with the first measure. The test was less associated with formal education than the Clock Drawing Test. It classified about 76% of the participants correctly and had and additive effect with the Mini-Mental State Examination (84% of correct classification). The test also correlated significantly with measures of ADL, suggesting ecological validity. The Stick Design Test shows evidence of construct, criterion-related and ecological validity. It is an interesting alternative to drawing tasks for the assessment of visuospatial abilities.

RF Energy Harvesting Peel-and-Stick Sensors

Energy Technology Data Exchange (ETDEWEB)

Lalau-Keraly, Christopher [PARC; Schwartz, David; Daniel, George; Lee, Joseph

2017-08-29

PARC, a Xerox Company, is developing a low-cost system of peel-and-stick wireless sensors that will enable widespread building environment sensor deployment with the potential to deliver up to 30% energy savings. The system is embodied by a set of RF hubs that provide power to the automatically located sensor nodes, and relays data wirelessly to the building management system (BMS). The sensor nodes are flexible electronic labels powered by rectified RF energy transmitted by a RF hub and can contain multiple printed and conventional sensors. The system design overcomes limitations in wireless sensors related to power delivery, lifetime, and cost by eliminating batteries and photovoltaic devices. The sensor localization is performed automatically by the inclusion of a programmable multidirectional antenna array in the RF hub. Comparison of signal strengths when the RF beam is swept allows for sensor localization, further reducing installation effort and enabling automatic recommissioning of sensors that have been relocated, overcoming a significant challenge in building operations. PARC has already demonstrated wireless power and temperature data transmission up to a distance of 20m with a duty cycle less than a minute between measurements, using power levels well within the FCC regulation limits in the 902-928 MHz ISM band. The sensor’s RF energy harvesting antenna dimensions was less than 5cmx9cm, demonstrating the possibility of small form factor for the sensor nodes.

Chronic toxicity test with sea urchin Echinometra lucunter and Lytechinus variegatus (Echinodermata: Echinoidea, exposed to light-stick - flag paternoster used for longline surface fishing

Directory of Open Access Journals (Sweden)

Caio Cesar-Ribeiro

2010-06-01

Full Text Available In this work, the chronic toxicity of a mixture of light-stick chemicals and water was tested. The light-stick is used in fishery activities to catch swordfish. The tubes were collected on the beaches of the Costa dos Coqueiros - BA, Brazil, in the period from 14th to 31st July 2007. The method used was a short chronic toxicity test where embryos of the sea urchins Echinometra lucunter and Lytechinus variegatus were exposed to a stock solution consisting of the supernatant formed from a mixture of sea water and the orange-colored light-stick chemical. After a preliminary test, concentrations defined were 0.002, 0.003, 0.01, 0.02, 0.1, 1.0% of stock solution. The final test ran for 36 hours for E. Lucunter and 24 hours for L. variegatus with 4 replicates for each concentration. The value of EC50 - 36h was 0.062% with confidence limits ranging from 0.042 to 0.079% and the EC50 - 24h was 0.011% with confidence limits ranging from 0.009 to 0.014%, i.e., the chemical mix present in the light-stick is potentially toxic. So, as these flags are commonly used for fishing there is potential danger in their disposal in the open ocean.O objetivo deste trabalho foi avaliar a toxicidade crônica da água do mar em contato com o líquido contido no light-stick, sinalizador utilizado em pesca de espinhel de superfície para a captura de espadarte. Os tubos foram coletados nas praias da Costa dos Coqueiros - BA, no período de 14 a 31 de Julho de 2007. O método utilizado para a verificação da toxicidade crônica foi o teste de curta duração com embriões de ouriço-do-mar Echinometra lucunter e Lytechinus variegatus, os ensaios foram realizados com solução estoque que consiste do sobrenadante formado a partir de uma mistura de água do mar com o líquido do sinalizador de coloração laranja. Após um teste preliminar as concentrações definidas foram 0.002; 0.003; 0.01; 0.02; 0.1; 1.0%. O teste definitivo teve duração de 36 horas para E. lucunter e 24

Innovation That Sticks Case Study Report: Ottawa Catholic School Board. Leading and Learning for Innovation, A Framework for District-Wide Change

Science.gov (United States)

Canadian Education Association, 2016

2016-01-01

A Canadian Education Association (CEA) Selection Jury chose the Ottawa Catholic School Board (OCSB) out of 35 School District applicants from across Canada to participate in the 2015 "Innovation that Sticks" Case Study Program. From September to December 2015--through an Appreciative Inquiry interview process--the CEA researched how the…

Risk of needle stick injuries in health care workers - A report

Directory of Open Access Journals (Sweden)

Rele M

2002-01-01

Full Text Available Health care workers (HCW are at a risk of occupational acquisition of Human Immunodeficiency Virus (HIV infection, primarily due to accidental exposure to infected blood and body fluids. In our general public hospital, over a period of one year (June 2000 - 2001 a total number of 38 self reported incidences of needlestick injuries and other exposures to patient′s blood and body fluids were reported by HCWs. A greater incidence of occupational exposure was seen in surgery residents as compared to medicine residents. Till date, i.e. in one and a half-year follow up period, no seroconversion was seen in any of the reported accidental injury cases. This data emphasizes, that needle stick injuries present the single greatest risk to medical personnel and the importance of increased awareness and training in universal safety precautions (USP, for prevention of nosocomial infection.

Assembling large genomes: analysis of the stick insect (Clitarchus hookeri) genome reveals a high repeat content and sex-biased genes associated with reproduction.

Science.gov (United States)

Wu, Chen; Twort, Victoria G; Crowhurst, Ross N; Newcomb, Richard D; Buckley, Thomas R

2017-11-16

Stick insects (Phasmatodea) have a high incidence of parthenogenesis and other alternative reproductive strategies, yet the genetic basis of reproduction is poorly understood. Phasmatodea includes nearly 3000 species, yet only the genome of Timema cristinae has been published to date. Clitarchus hookeri is a geographical parthenogenetic stick insect distributed across New Zealand. Sexual reproduction dominates in northern habitats but is replaced by parthenogenesis in the south. Here, we present a de novo genome assembly of a female C. hookeri and use it to detect candidate genes associated with gamete production and development in females and males. We also explore the factors underlying large genome size in stick insects. The C. hookeri genome assembly was 4.2 Gb, similar to the flow cytometry estimate, making it the second largest insect genome sequenced and assembled to date. Like the large genome of Locusta migratoria, the genome of C. hookeri is also highly repetitive and the predicted gene models are much longer than those from most other sequenced insect genomes, largely due to longer introns. Miniature inverted repeat transposable elements (MITEs), absent in the much smaller T. cristinae genome, is the most abundant repeat type in the C. hookeri genome assembly. Mapping RNA-Seq reads from female and male gonadal transcriptomes onto the genome assembly resulted in the identification of 39,940 gene loci, 15.8% and 37.6% of which showed female-biased and male-biased expression, respectively. The genes that were over-expressed in females were mostly associated with molecular transportation, developmental process, oocyte growth and reproductive process; whereas, the male-biased genes were enriched in rhythmic process, molecular transducer activity and synapse. Several genes involved in the juvenile hormone synthesis pathway were also identified. The evolution of large insect genomes such as L. migratoria and C. hookeri genomes is most likely due to the

Stick-Slip Analysis of a Drill String Subjected to Deterministic Excitation and Stochastic Excitation

Directory of Open Access Journals (Sweden)

Hongyuan Qiu

2016-01-01

Full Text Available Using a finite element model, this paper investigates the torsional vibration of a drill string under combined deterministic excitation and random excitation. The random excitation is caused by the random friction coefficients between the drill bit and the bottom of the hole and assumed as white noise. Simulation shows that the responses under random excitation become random too, and the probabilistic distribution of the responses at each discretized time instant is obtained. The two points, entering and leaving the stick stage, are examined with special attention. The results indicate that the two points become random under random excitation, and the distributions are not normal even when the excitation is assumed as Gaussian white noise.

Effects of age and cognition on a cross-cultural paediatric adaptation of the Sniffin' Sticks Identification Test.

Science.gov (United States)

Bastos, Laís Orrico Donnabella; Guerreiro, Marilisa Mantovani; Lees, Andrew John; Warner, Thomas T; Silveira-Moriyama, Laura

2015-01-01

To study the effects of age and cognition on the performance of children aged 3 to 18 years on a culturally adapted version of the 16 item smell identification test from Sniffin' Sticks (SS16). A series of pilots were conducted on 29 children aged 3 to 18 years old and 23 adults to produce an adapted version of the SS16 suitable for Brazilian children (SS16-Child). A final version was applied to 51 children alongside a picture identification test (PIT-SS16-Child) to access cognitive abilities involved in the smell identification task. In addition 20 adults performed the same tasks as a comparison group. The final adapted SS16-Child was applied to 51 children with a mean age of 9.9 years (range 3-18 years, SD=4.25 years), of which 68.3% were girls. There was an independent effect of age (pPIT-SS16-Child (p<0.001) on the performance on the SS16-Child, and older children reached the ceiling for scoring in the cognitive and olfactory test. Pre-school children had difficulties identifying items of the test. A cross-culturally adapted version of the SS16 can be used to test olfaction in children but interpretation of the results must take age and cognitive abilities into consideration.

Effects of age and cognition on a cross-cultural paediatric adaptation of the Sniffin' Sticks Identification Test.

Directory of Open Access Journals (Sweden)

Laís Orrico Donnabella Bastos

Full Text Available To study the effects of age and cognition on the performance of children aged 3 to 18 years on a culturally adapted version of the 16 item smell identification test from Sniffin' Sticks (SS16.A series of pilots were conducted on 29 children aged 3 to 18 years old and 23 adults to produce an adapted version of the SS16 suitable for Brazilian children (SS16-Child. A final version was applied to 51 children alongside a picture identification test (PIT-SS16-Child to access cognitive abilities involved in the smell identification task. In addition 20 adults performed the same tasks as a comparison group.The final adapted SS16-Child was applied to 51 children with a mean age of 9.9 years (range 3-18 years, SD=4.25 years, of which 68.3% were girls. There was an independent effect of age (p<0.05 and PIT-SS16-Child (p<0.001 on the performance on the SS16-Child, and older children reached the ceiling for scoring in the cognitive and olfactory test. Pre-school children had difficulties identifying items of the test.A cross-culturally adapted version of the SS16 can be used to test olfaction in children but interpretation of the results must take age and cognitive abilities into consideration.

Muon sticking factor in muon catalyzed fusion and the other aspect of this fusion process

International Nuclear Information System (INIS)

Takahashi, H.

1986-01-01

The effect of resonance nuclear fusion reaction on the initial muon sticking factor is formulated. The analysis shows that it is very sensitive to the resonance parameter, and the factor calculated, using the molecular wave function obtained by the Diffusion Monte Carlo method, is 0.1 +- 0.01 for the presently evaluated resonance parameter. The analysis of the multistep excitation effect on the reactivation factor shows that the effect is not so large, and the analysis of muonic x-ray spectra of μ 3 He from Pμd and dμd fusions is in good agreement with the values measured by Bossy et al

PENGARUH PENAMBAHAN SIKA GROUT PADA MORTAR SEBAGAI BAHAN GROUTING TERHADAP LEKATAN TULANGAN DALAM BETON DENGAN COPPER SLAG SEBAGAI CEMENTITIOUS

Directory of Open Access Journals (Sweden)

Mohammad Sulton

2012-09-01

Full Text Available Abstract: The Impact of Sika Grout Addition on Grouting Mortar Toward Concrete Reinforcement Stickness with Copper Slag as Cementitious. The aim of this research is to identify the impact of Sika Grout addition on grouting mortar toward concrete reinforcement stickness with copper slag as cementitious. The experiment result of this research shows that (1 the addition of Sika Grout 215 in grouting mortar can improve the reinforcement stickness; (2 the use of 100% Sika Grout 215 in grouting mortar produces maximum stickness; (3 the stickness of 100% Sika Grout 215 has 12.800 kg stronger (2,8% of improvement than those of using copper slag reinforcement (without grouting as 12.450 kg; (4 the use of less than 100% Sika Grout produces less stickness of no-grouting reinforcement; and (5 there is similar slip characteristic between  concrete reinforcement added with grouting and without grouting as 2,5 mm on outer part of the mortar.

A Case of endoscopic retrieval of a long bamboo stick from a Humboldt penguin (Spheniscus humboldti).

Science.gov (United States)

Jung, Woo-Sung; Ko, Minho; Cho, Hyun Kee; Kang, Byung-Jae; Choi, Jung Hoon; Chung, Jin-Young

2017-02-28

An eighteen-month-old female Humboldt penguin (Spheniscus humboldti) that was 50 cm in length and 4.5 kg in weight was presented with anorexia and vomiting. The hematological and blood biochemical profiles revealed no remarkable findings, and no Salmonella, Shigella or Vibrio spp. were isolated from the fecal culture. However, radiographic imaging revealed a long linear foreign body presenting from the lower esophagus to the stomach. To retrieve this foreign body, flexible endoscopic extraction was performed using flexible rat tooth grasping forceps. A long bamboo stick (29 × 1 cm) was removed from the stomach, and the penguin fully recovered.

InAs/InP(001) quantum dots and quantum sticks grown by MOVPE: shape, anisotropy and formation process

International Nuclear Information System (INIS)

Michon, A.; Patriarche, G.; Sagnes, I.; Beaudoin, G.; Saint-Girons, G.

2006-01-01

This contribution presents a thermodynamical analysis of the formation process of InAs/InP(001) quantum dots (QDs) or quantum sticks (QSs) grown by metalorganic vapor phase epitaxy. This study, based on an analytical model of Tersoff et al. adapted to our QD geometry, describes the origin of QD shape anisotropy and size dispersion. It also explains the shape transition from QDs to QSs under As-poor growth conditions. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Basics of compounding: Tips and hints: powders, capsules, tablets, suppositories, and sticks, part 1.

Science.gov (United States)

Allen, Loyd V

2014-01-01

No matter the profession, professionals should never stop learning. This is especially true and important in the profession of compounding pharmacy. Compounding pharmacists are continuously faced with the challenge of finding new and inventive ways to assist patients with their individual and specific drug requirements. As compounding pharmacists learn, be it through formal continuing education or experience, they should be willing to share their knowledge with other compounders. In our goal of providing compounding pharmacists with additional knowledge to improve their skills in the art and practice of compounding, this article, which provides tips and hits on compounding with powders, capsules, tablets, suppositories, and sticks, represents the first in a series of articles to assist compounding pharmacists in the preparation of compounded medications.

Sticking to the story: outstanding challenges in gecko-inspired adhesives.

Science.gov (United States)

Niewiarowski, Peter H; Stark, Alyssa Y; Dhinojwala, Ali

2016-04-01

The natural clinging ability of geckos has inspired hundreds of studies seeking design principles that could be applied to creating synthetic adhesives with the same performance capabilities as the gecko: adhesives that use no glue, are self-cleaning and reusable, and are insensitive to a wide range of surface chemistries and roughness. Important progress has been made, and the basic mechanics of how 'hairy' adhesives work have been faithfully reproduced, advancing theory in surface science and portending diverse practical applications. However, after 15 years, no synthetic mimic can yet perform as well as a gecko and simultaneously meet of all the criteria listed above. Moreover, processes for the production of inexpensive and scalable products are still not clearly in view. Here, we discuss our perspective on some of the gaps in understanding that still remain; these gaps in our knowledge should stimulate us to turn to deeper study of the way in which free-ranging geckos stick to the variety of surfaces found in their natural environments and to a more complete analysis of the materials composing the gecko toe pads. © 2016. Published by The Company of Biologists Ltd.

Critical Velocity for Stick-Slip Motion of an Elastic Block

Science.gov (United States)

Luan, Binquan; Robbins, Mark

2003-03-01

Molecular dynamics simulations are used to study stick-slip motion of an elastic slider over a rigid substrate covered by a thin film. We study the variation of force with time and the critical velocity vc above which steady sliding is observed as a function of the mass M, size, geometry and stiffness of the slider. The results resolve a controversy over the relationship between vc and M. When the cross-section of the slider is independent of height above the contact, vc becomes independent of M as M increases.^1 However, when the cross-section rises with distance from the contact, as in the Surface Force Apparatus,^2 the stiffness is dominated by regions near the contact. In this case, the slider is effectively rigid and vc decreases as M-1/2 as predicted by Robbins and Thompson.^3 ^1B. N. J. Persson, Sliding Friction: Physical Principles and Applications (Springer, Berlin, 1998). ^2M. L. Gee, P. M. McGuiggan, J. N. Israelachvili and A. M. Homola, J. Chem. Phys. 93, 1895 (1990). ^3M. O. Robbins and P. A. Thompson, Science 253, 916 (1991).

Seismogenic frictional melting in the magmatic column as the driving force of stick-slip motion

Science.gov (United States)

Kendrick, J. E.; Lavallee, Y.; Hirose, T.; Di Toro, G.; Hornby, A.; De Angelis, S.; Henton De Angelis, S.; Ferk, A.; Hess, K.; Leonhardt, R.; Dingwell, D. B.

2013-12-01

Lava dome eruptions subjected to high extrusion rates commonly evolve from endogenous to exogenous growth and limits to their structural stability hold catastrophic potential as explosive eruption triggers. In the conduit strain localisation in magma, accompanied by seismogenic failure, marks the onset of brittle magma ascent dynamics. The rock record of exogenous dome structures preserves vestiges of cataclastic processes and of thermal anomalies, key to unravelling subsurface processes. A combined structural, thermal and magnetic investigation of shear bands from Mount St. Helens (MSH) and Soufrière Hills volcano (SHV) reveal evidence of faulting and frictional melting within the magmatic column. High velocity rotary shear (HVR) experiments demonstrate the propensity for melting of andesitic and dacitic material (from SHV and MSH respectively) at upper conduit stress conditions. Such melting events may be linked to the step-wise extrusion of magma accompanied by repetitive long-period (LP) seismicity. Using a source duration calculated from the waveforms at seismic stations around SHV, and slip distance per drumbeat calculated from extrusion rate, frictional melting of SHV andesite in a high velocity rotary shear apparatus can be achieved at small slip distances (HVR experiments which mimic rapid velocity fluctuations in stick-slip behavior demonstrate velocity-weakening behavior of melt, with a tendency for unstable slip. We postulate that pseudotachylyte generation could be the underlying cause of stick-slip motion and associated seismic 'drumbeats', which are so commonly observed at dome-building volcanoes, allowing for a fixed spatial locus and the occurrence of 'families' of similar seismic events. We conclude that, given the ease with which melting is achieved in volcanic rocks, and considering the high ambient temperatures in volcanic conduits, frictional melting is a highly probable consequence of viscous magma ascent.

Pyothorax induced by an intrathoracic foreign body in a miniature dachshund: Migration of a popsicle stick from the stomach

OpenAIRE

CHOI, Yi-Don; HAN, Hyun-Jung

2017-01-01

A four-year-old dachshund presented with a two-week history of pyrexia, depression, and cough. Four months earlier, the owner observed the dog swallow a whole popsicle stick, but the animal showed no clinical signs at that time. Radiography, ultrasonography, and computed tomography confirmed an intrathoracic linear foreign body and pleural effusion in the right thorax. The pleural fluid was bloody and purulent, and contained inflammatory cells and Escherichia coli. The dog was diagnosed with ...

Acidity, oxophilicity and hydrogen sticking probability of supported metal catalysts for hydrodeoxygenation process

Science.gov (United States)

Lup, A. Ng K.; Abnisa, F.; Daud, W. M. A. W.; Aroua, M. K.

2018-03-01

Hydrodeoxygenation is an oxygen removal process that occurs in the presence of hydrogen and catalysts. This study has shown the importance of acidity, oxophilicity and hydrogen sticking probability of supported metal catalysts in having high hydrodeoxygenation activity and selectivity. These properties are required to ensure the catalyst has high affinity for C-O or C=O bonds and the capability for the adsorption and activation of H2 and O-containing compounds. A theoretical framework of temperature programmed desorption technique was also discussed for the quantitative understanding of these properties. By using NH3-TPD, the nature and abundance of acid sites of catalyst can be determined. By using H2-TPD, the nature and abundance of metallic sites can also be determined. The desorption activation energy could also be determined based on the Redhead analysis of TPD spectra with different heating rates.

Peel-and-Stick Sensors Powered by Directed RF Energy

Energy Technology Data Exchange (ETDEWEB)

Lalau-Keraly, Christopher; Daniel, George; Lee, Joseph; Schwartz, David

2017-08-30

PARC, a Xerox Company, is developing a low-cost system of peel-and-stick wireless sensors that will enable widespread building environment sensor deployment with the potential to deliver up to 30% energy savings. The system is embodied by a set of RF hubs that provide power to automatically located sensor nodes, and relay data wirelessly to the building management system (BMS). The sensor nodes are flexible electronic labels powered by rectified RF energy transmitted by an RF hub and can contain multiple printed and conventional sensors. The system design overcomes limitations in wireless sensors related to power delivery, lifetime, and cost by eliminating batteries and photovoltaic devices. Sensor localization is performed automatically by the inclusion of a programmable multidirectional antenna array in the RF hub. Comparison of signal strengths while the RF beam is swept allows for sensor localization, reducing installation effort and enabling automatic recommissioning of sensors that have been relocated, overcoming a significant challenge in building operations. PARC has already demonstrated wireless power and temperature data transmission up to a distance of 20m with less than one minute between measurements, using power levels well within the FCC regulation limits in the 902-928 MHz ISM band. The sensor’s RF energy harvesting antenna achieves high performance with dimensions below 5cm x 9cm

Application of the Ta liner technique to produce Ca beams at INFN-Legnaro National Laboratories (INFN-LNL)

Energy Technology Data Exchange (ETDEWEB)

Galatà, A., E-mail: alessio.galata@lnl.infn.it; Sattin, M.; Manzolaro, M.; Martini, D.; Facco, A. [INFN-Legnaro National Laboratories, Legnaro (Pd) (Italy); Tinschert, K.; Spaedtke, P.; Lang, R. [GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt (Germany); Kulevoy, T. [Institute for Theoretical and Experimental Physics, Moscow (Russian Federation)

2014-02-15

The ECR ion sources are able to produce a wide variety of highly charged metallic ion beams thanks to the development of different techniques (ovens, sputtering, direct insertion, metal ions from volatile compounds (MIVOC)). In the case of the ovens, the sticking of the hot vapors on the surface of the plasma chamber leads to high material consumption rates. For elements like Ca, a tantalum liner inserted inside the chamber can be used to limit this phenomenon. The modeling of temperature distribution inside the chamber with and without the liner was carried out with COMSOL-multiphysics code. Results of simulation and the comparison with experiments performed at INFN-Legnaro National Laboratories with Ca beams are discussed.

Multiple Identified Neurons and Peripheral Nerves Innervating the Prothoracic Defense Glands in Stick Insects Reveal Evolutionary Conserved and Novel Elements of a Chemical Defense System

Directory of Open Access Journals (Sweden)

Johannes Strauß

2017-11-01

Full Text Available The defense glands in the dorsal prothorax are an important autapomorphic trait of stick insects (Phasmatodea. Here, we study the functional anatomy and neuronal innervation of the defense glands in Anisomorpha paromalus (Westwood, 1859 (Pseudophasmatinae, a species which sprays its defense secretions when disturbed or attacked. We use a neuroanatomical approach to identify the nerves innervating the gland muscles and the motoneurons with axons in the different nerves. The defense gland is innervated by nerves originating from two segments, the subesophageal ganglion (SOG, and the prothoracic ganglion. Axonal tracing confirms the gland innervation via the anterior subesophageal nerve, and two intersegmental nerves, the posterior subesophageal nerve, and the anterior prothoracic nerve. Axonal tracing of individual nerves reveals eight identified neuron types in the subesophageal or prothoracic ganglion. The strongest innervating nerve of the gland is the anterior subesophageal nerve, which also supplies dorsal longitudinal thorax muscles (neck muscles by separate nerve branches. Tracing of individual nerve branches reveals different sets of motoneurons innervating the defense gland (one ipsilateral and one contralateral subesophageal neuron or the neck muscle (ventral median neurons. The ipsilateral and contralateral subesophageal neurons have no homologs in related taxa like locusts and crickets, and thus evolved within stick insects with the differentiation of the defense glands. The overall innervation pattern suggests that the longitudinal gland muscles derived from dorsal longitudinal neck muscles. In sum, the innervating nerves for dorsal longitudinal muscles are conserved in stick insects, while the neuronal control system was specialized with conserved motoneurons for the persisting neck muscles, and evolutionarily novel subesophageal and prothoracic motoneurons innervating the defense gland.

Comparison of the Effectiveness of Oral Sucrose and Emla Cream in Reduction of Acute Pain Due to Heel Sticks for Blood Sampling in Neonates

Directory of Open Access Journals (Sweden)

S Abyari

2007-04-01

Full Text Available Introduction: Certain painful, invasive procedures are necessary for care, and are commonly performed in both healthly and sick neonates. Current evidence shows that the newborn infant has both physiologic and anatomic capacity to experience pain. Recent research suggests that pain experienced in the neonatal period might have long-term effects later in life. Previous research has shown that orally administered sweet-tasting solutions reduce signs of pain during painful procedures. This effect is considered to be mediated both by the release of endorphins and by a preabsorptive mechanism related to the sweet taste. Methods: This study was a controlled , randomized and double – blind study on 210 neonates. These newborns were randomly divided into 3 groups; A, B and C. Group A received 2 ml of 25% sucrose orally as well as base cream was applied at the site for heel stick, group B received 2 ml of distilled water and application of EMLA cream, while group C received 2 ml of distilled water and base cream. The heart rates of the newborn were recorded by the cardiac monitor before and after heel stick blood sampling and the duration of crying was determined as well. Pain was scored by DAN scale.There were no differences in demographic characteristics of all neonates. Results: The results showed that the DAN scale was significantly lower in the sucrose group (mean : 3.840 as compared to the EMLA group (mean: 3.366 and the placebo group(5.557, but the difference in the duration of crying was not significantly different in the sucrose group (mean: 10.5 second and the EMLA group(mean 8.76. Conclusion: Both sucrose and EMLA are effective in reducing stress associated with heel lancet in newborns, but as sucrose acts faster and is healthier, its usage is proposed in neonates requiring heel sticks for blood sampling.

Needle-Stick Injury among Health Care Workers in Hemodialysis Units in Nigeria: A Multi-Center Study

Directory of Open Access Journals (Sweden)

CO Amira

2014-01-01

Full Text Available Background: Needle-stick and sharps injuries carry the risk of infection and are occupational hazards for all health care professionals involved in clinical care. Objective: To determine the frequency and factors contributing to needle-stick injury (NSI among health care workers of dialysis units in Lagos, Nigeria. Methods: Data were obtained by anonymous, self-reporting questionnaire from staff of 4 hemodialysis units between October and December 2011. Information on demographics, job category and duration, details of NSI in the past, kind of activity and procedure under which the NSI occurred, if injury was reported, vaccination status of staff, and post-exposure treatment received were obtained. Results: The study population included 38 (37.3% doctors, 42 nurses (41.2%, 14 (13.7% dialysis technicians and 8 (7.8% ancillary staff. There were 39 (38.2% males. The mean±SD age of the study population was 34.4±8.3 years. 25 (24.5% staff had suffered NSI in the last 12 months and 41 (40.2% in their entire working career. The most common activity leading to NSI was recapping of needles (45%, improper disposal of needles (30%, and venous cannulation and setting of drips (27.5%. NSI was significantly (p=0.016 higher among those with work experience between 6 and 10 years than others. Hollow bore needles were responsible for 82.9% of the NSIs. Only 15 (37% respondents reported their NSI to their unit head or designated officer in order to get medical advice. Conclusion: In Lagos, Nigeria, NSI is common among hemodialysis staff and is under-reported. Many NSIs can be prevented by adhering to the practice of universal precautions as well as education of staff on such precautionary methods.

Effects of Bufei Yishen Granules Combined with Acupoint Sticking Therapy on Pulmonary Surfactant Proteins in Chronic Obstructive Pulmonary Disease Rats

Directory of Open Access Journals (Sweden)

Yange Tian

2016-01-01

Full Text Available Our previous studies have demonstrated the beneficial effects of Bufei Yishen granules combined with acupoint sticking therapy (the integrated therapy in chronic obstructive pulmonary disease (COPD, but the underlying mechanism remains unclear. Dysfunction of pulmonary surfactant proteins (SPs, including SP-A, SP-B, SP-C, and SP-D may be included in pathophysiology of COPD. This study aimed to explore the mechanism of the integrated therapy on SPs. COPD rat models were established. The treatment groups received Bufei Yishen granules or acupoint sticking or their combination. Using aminophylline as a positive control drug. The levels of SPs in serum, BALF, and lung were measured. The results showed that the integrated therapy markedly reduced the levels of SPs in serum and increased these indicators in the lung. The integrated therapy was better than aminophylline in reducing the levels of SPs and was better than Bufei Yishen granules in reducing SP-A, SP-C, and SP-D in serum. The integrated therapy was better than aminophylline and Bufei Yishen granules in increasing SP-A, SP-B, and SP-D mRNA in the lung. SP-A and SP-D in BALF were positively correlated with PEF and EF50. The levels of SPs are associated with airway limitation. The beneficial effects of the integrated therapy may be involved in regulating pulmonary surfactant proteins.

Slip-Stick Mechanism in Training the Superconducting Magnets in the Large Hadron Collider

CERN Document Server

Granieri, P P; Todesco, E

2011-01-01

Superconducting magnets can exhibit training quenches during successive powering to reaching nominal performance. The slip–stick motion of the conductors is considered to be one of the mechanisms of training. In this paper, we present a simple quantitative model where the training is described as a discrete dynamical system matching the equilibrium between the energy margin of the superconducting cable and the frictional energy released during the conductor motion. The model can be explicitly solved in the linearized case, showing that the short sample limit is reached via a power law. Training phenomena have a large random component. A large set of data of the large hadron collider magnet tests is postprocessed according to previously defined methods to extract an average training curve for dipoles and quadrupoles. These curves show the asymptotic power law predicted by the model. The curves are then fit through the model, which has two free parameters. The model shows good agreement over a large range, bu...

Slip-Stick Mechanism in Training the Superconducting Magnets in the Large Hadron Collider

CERN Document Server

Granieri, P P; Lorin, C

2011-01-01

Superconducting magnets can exhibit training quenches during successive powering to reaching nominal performance. The slip-stick motion of the conductors is considered to be one of the mechanisms of training. In this paper, we present a simple quantitative model where the training is described as a discrete dynamical system matching the equilibrium between the energy margin of the superconducting cable and the frictional energy released during the conductor motion. The model can be explicitly solved in the linearized case, showing that the short sample limit is reached via a power law. Training phenomena have a large random component. A large set of data of the large hadron collider magnet tests is postprocessed according to previously defined methods to extract an average training curve for dipoles and quadrupoles. These curves show the asymptotic power law predicted by the model. The curves are then fit through the model, which has two free parameters. The model shows good agreement over a large range, but ...

Deodorant effects of a sage extract stick: Antibacterial activity and sensory evaluation of axillary deodorancy.

Science.gov (United States)

Shahtalebi, Mohammad Ali; Ghanadian, Mustafa; Farzan, Ali; Shiri, Niloufar; Shokri, Dariush; Fatemi, Syed Ali

2013-10-01

Deodorant products prevent the growth and activity of the degrading apocrine gland bacteria living in the armpit. Common antibacterial agents in the market like triclosan and aluminum salts, in spite of their suitable antibacterial effects, increase the risk of Alzheimer's disease, breast and prostate cancers or induce contact dermatitis. Therefore, plant extracts possessing antibacterial effects are of interest. The aim of the present study was to verify the in vitro antimicrobial effects of different sage extracts against two major bacteria responsible for axillary odor, and to evaluate the deodorant effect of a silicon-based stick containing sage extracts in different densities in humans. Different fractions of methanolic extract of Salvia officinalis (sage) were evaluated on a culture of armpit skin surface of volunteers through agar microdilution antimicrobial assay. Then, randomized, double-blind placebo-controlled clinical trial with the best antibacterial fraction was conducted on 45 female healthy volunteers. Participants were treated with a single dose in four groups, each containing 15 individuals: Group 1 (200 μg/mL), 2 (400 μg/mL), 3 (600 μg/mL) of dichloromethane sage extract, and placebo (without extract). A standard sensory evaluation method for the evaluation of deodorant efficacy was used before, and two hours, four hours, and eight hours after single application of a deodorant or placebo (ASTM method E 1207-87 Standard Practice for the Sensory Evaluation of Axillary Deodorancy). The data were analyzed with two factors relating to densities and time. In 45 participants with a mean [± standard deviation (SD)] age of 61.5±11.8 years, statistically significant within-group differences were observed before and two, four, and eight hours after deodorant treatment for groups 1, 2, and 3. Groups 1, 2, and 3 had a significantly smaller odor score than placebo after two, four, and eight hours (P sage extract sticks (P sage extract of 200, 400, or 600

'Dip-sticks' calibration handles self-attenuation and coincidence effects in large-volume gamma-ray spectrometry

CERN Document Server

Wolterbeek, H T

2000-01-01

Routine gamma-spectrometric analyses of samples with low-level activities (e.g. food, water, environmental and industrial samples) are often performed in large samples, placed close to the detector. In these geometries, detection sensitivity is improved but large errors are introduced due to self-attenuation and coincidence summing. Current approaches to these problems comprise computational methods and spiked standard materials. However, the first are often regarded as too complex for practical routine use, the latter never fully match real samples. In the present study, we introduce a dip-sticks calibration as a fast and easy practical solution to this quantification problem in a routine analytical setting. In the proposed set-up, calibrations are performed within the sample itself, thus making it a broadly accessible matching-reference approach, which is principally usable for all sample matrices.

Neurons of self-defence: neuronal innervation of the exocrine defence glands in stick insects.

Science.gov (United States)

Stolz, Konrad; von Bredow, Christoph-Rüdiger; von Bredow, Yvette M; Lakes-Harlan, Reinhard; Trenczek, Tina E; Strauß, Johannes

2015-01-01

Stick insects (Phasmatodea) use repellent chemical substances (allomones) for defence which are released from so-called defence glands in the prothorax. These glands differ in size between species, and are under neuronal control from the CNS. The detailed neural innervation and possible differences between species are not studied so far. Using axonal tracing, the neuronal innervation is investigated comparing four species. The aim is to document the complexity of defence gland innervation in peripheral nerves and central motoneurons in stick insects. In the species studied here, the defence gland is innervated by the intersegmental nerve complex (ISN) which is formed by three nerves from the prothoracic (T1) and suboesophageal ganglion (SOG), as well as a distinct suboesophageal nerve (Nervus anterior of the suboesophageal ganglion). In Carausius morosus and Sipyloidea sipylus, axonal tracing confirmed an innervation of the defence glands by this N. anterior SOG as well as N. anterior T1 and N. posterior SOG from the intersegmental nerve complex. In Peruphasma schultei, which has rather large defence glands, only the innervation by the N. anterior SOG was documented by axonal tracing. In the central nervous system of all species, 3-4 neuron types are identified by axonal tracing which send axons in the N. anterior SOG likely innervating the defence gland as well as adjacent muscles. These neurons are mainly suboesophageal neurons with one intersegmental neuron located in the prothoracic ganglion. The neuron types are conserved in the species studied, but the combination of neuron types is not identical. In addition, the central nervous system in S. sipylus contains one suboesophageal and one prothoracic neuron type with axons in the intersegmental nerve complex contacting the defence gland. Axonal tracing shows a very complex innervation pattern of the defence glands of Phasmatodea which contains different neurons in different nerves from two adjacent body segments

Numerical Application of a Stick-Slip Control and Experimental Analysis using a Test Rig

Directory of Open Access Journals (Sweden)

Pereira Leonardo D.

2018-01-01

Full Text Available Part of the process of exploration and development of an oil field consists of the drilling operations for oil and gas wells. Particularly for deep water and ultra deep water wells, the operation requires the control of a very flexible structure which is subjected to complex boundary conditions such as the nonlinear interactions between drill bit and rock formation and between the drill string and borehole wall. Concerning this complexity, the stick-slip phenomenon is a major component related to the torsional vibration and it can excite both axial and lateral vibrations. With these intentions, this paper has the main goal of confronting the torsional vibration problem over a test rig numerical model using a real-time conventional controller. The system contains two discs in which dry friction torques are applied. Therefore, the dynamical behaviour were analysed with and without controlling strategies.

On the stick-slip behaviour of water-lubricated rubber sealings

Science.gov (United States)

Thörmann, Stefan; Markiewicz, Marian; von Estorff, Otto

2017-07-01

The phenomenon of friction-induced vibration is investigated, focussing on the automobile topic of a car door window in sliding contact with the adjacent rubber seal. Within this study, the influencing parameters on the stick-slip motion are explored experimentally and using FE-simulation. A test rig is established to represent the situation at the car door window under defined and repeatable conditions. It consists of a rotating glass disc in sliding contact with a rubber specimen. The frictional properties of the rubber specimen and the glass disc as well as their vibration response and sound radiation are examined. Parameter studies regarding the influence of the relative sliding velocity and the contact normal force on the vibration response and the sound radiation are carried out experimentally and the results are discussed. A finite element model of the test setup is generated and validated with the spectral results of the recorded sound from experiment. With the use of FE-simulation a detailed analysis on the behaviour of friction-induced vibration of rubber specimen and glass disc is carried out. It can be identified, that the main impact on the spectral results of the friction-induced vibration is derived from the underlying frictional properties. Their influence is demonstrated in detail by picturing the motion of the rubber specimen, represented by the limit cycle, for different friction characteristics.

Why do sleeping nematodes adopt a hockey-stick-like posture?

Directory of Open Access Journals (Sweden)

Nora Tramm

Full Text Available A characteristic posture is considered one of the behavioral hallmarks of sleep, and typically includes functional features such as support for the limbs and shielding of sensory organs. The nematode C. elegans exhibits a sleep-like state during a stage termed lethargus, which precedes ecdysis at the transition between larval stages. A hockey-stick-like posture is commonly observed during lethargus. What might its function be? It was previously noted that during lethargus, C. elegans nematodes abruptly rotate about their longitudinal axis. Plausibly, these "flips" facilitate ecdysis by assisting the disassociation of the old cuticle from the new one. We found that body-posture during lethargus was established using a stereotypical motor program and that body bends during lethargus quiescence were actively maintained. Moreover, flips occurred almost exclusively when the animals exhibited a single body bend, preferentially in the anterior or mid section of the body. We describe a simple biomechanical model that imposes the observed lengths of the longitudinally directed body-wall muscles on an otherwise passive elastic rod. We show that this minimal model is sufficient for generating a rotation about the anterior-posterior body axis. Our analysis suggests that posture during lethargus quiescence may serve a developmental role in facilitating flips and that the control of body wall muscles in anterior and posterior body regions are distinct.

Identification of differences in chemical composition among whole stick and sliced Nitran salamis trough principal component analysis

Directory of Open Access Journals (Sweden)

Tomáš Fekete

2016-05-01

Full Text Available The subject of this work was to examine differences in chemical composition of sliced and whole stick Nitran salamis, purchased from various manufacturers. Nitran salamis are traditional dry fermented meat products of Slovak origin. Taking into account variations in raw materials, production process and potential adulteration, differences in chemical composition within one brand of salami from different manufacturers might be expected. Ten salamis were determined for basic chemical composition attributes and Principal Component Analysis was applied on data matrix to identify anomalous ones. It has been shown that six attributes, namely: protein without collagen of total protein, total protein, total meat, total fat, collagen of total protein and NaCl, were the most important for salamis as first two Principal Components together explained 70.16% of variance among them. Nitran D was found to be the most anomalous salami, as had the lowest value of protein without collagen of total protein (14.14% ±0.26%, total protein (17.42% ±0.44%, total meat (120.29% ±0.98% and the highest one of total fat (50.85% ±0.95%, collagen of total protein (18.83% ±0.50% and NaCl (9.55% ±1.93%, when compared to its whole stick variant Nitran C and other samples. In addition to collagen of total protein content, Nitran D together with Nitran A, F and H did not satisfied the legislatively determined criterion, which is ≤16%. This suggested that extra connective tissues were added to intermediate products, which resulted in high variability and inferior quality of final products. It is a common practice in the meat industry to increase the protein content or water binding properties of meat products.

Investigation of humidity-dependent nanotribology behaviors of Si(1 0 0)/SiO2 pair moving from stick to slip

International Nuclear Information System (INIS)

Yu Jiaxin; Chen Lei; Qian Linmao; Song Danlu; Cai Yong

2013-01-01

Highlights: ► The effect of humidity on the motion behavior of Si(1 0 0)/SiO 2 pair was clarified. ► With increase in humidity, adhesion force increases slowly firstly, then sharply. ► With increase in humidity, friction force increases sharply firstly, then slowly. ► The wear degree of Si is relative to the physical state of absorbed water film. ► The tribochemical reaction of Si(1 0 0) in humid air was verified by ToF-SIMS. - Abstract: With an atomic force microscopy, the humidity-dependent nanotribology behaviors of Si(1 0 0) against SiO 2 microsphere were investigated while the relative movement translated from stick to slip. The relative humidity RH of air exhibits a strong effect on the motion behavior of Si(1 0 0)/SiO 2 pair. With the increase in RH, relative movement of Si(1 0 0)/SiO 2 pair is easier to keep into stick state, namely, the relative slip becomes more difficult to occur in a higher humidity range. The adhesion F a will increase with the increase in RH in the given humidity range. In the low RH range ( a increases very slowly. However, in relative higher RH range (>20%), F a increases very sharply once ‘liquid-like’ adsorbed water layer forms, because it increases the capillary force. The initial friction forces F t of Si(1 0 0)/SiO 2 pair also increase with the increase in RH in the given humidity range. However, different from F a , it increases sharply in the low RH range ( 30%). During the cyclic friction process, under the higher RH, relative stable tangential force is easier to be observed at higher displacement amplitude, here, the relative movement usually keeps into stick state. With the increase in RH, the surface damage of Si(1 0 0) transforms from mechanical deformation (forming hillock) to tribochemical wear (material removal). The tribochemical wear is sensitive to the absorbed water film with ‘solid-like’ structure, here, the wear volume increases drastically in this RH range (<20%); further increase of wear is

A comparative study of two statistical approaches for the analysis of real seismicity sequences and synthetic seismicity generated by a stick-slip experimental model

Science.gov (United States)

Flores-Marquez, Leticia Elsa; Ramirez Rojaz, Alejandro; Telesca, Luciano

2015-04-01

The study of two statistical approaches is analyzed for two different types of data sets, one is the seismicity generated by the subduction processes occurred at south Pacific coast of Mexico between 2005 and 2012, and the other corresponds to the synthetic seismic data generated by a stick-slip experimental model. The statistical methods used for the present study are the visibility graph in order to investigate the time dynamics of the series and the scaled probability density function in the natural time domain to investigate the critical order of the system. This comparison has the purpose to show the similarities between the dynamical behaviors of both types of data sets, from the point of view of critical systems. The observed behaviors allow us to conclude that the experimental set up globally reproduces the behavior observed in the statistical approaches used to analyses the seismicity of the subduction zone. The present study was supported by the Bilateral Project Italy-Mexico Experimental Stick-slip models of tectonic faults: innovative statistical approaches applied to synthetic seismic sequences, jointly funded by MAECI (Italy) and AMEXCID (Mexico) in the framework of the Bilateral Agreement for Scientific and Technological Cooperation PE 2014-2016.

[Effect of joss stick moxibustion combined with pricking and cupping for acute herpes zoster and its mechanism of analgesia].

Science.gov (United States)

Ye, Guoping; Su, Meiling; Zhu, Dingyu; Zhang, Linyun; Lin, Wang; Huang, Li; Wu, Mingxia

2017-12-12

To observe the effects of conventional western medication and joss stick moxibustion combined with pricking and cupping for herpes zoster in acute stage, and to explore its analgesic mechanism. Seventy patients with acute herpes zoster were randomized into an observation group (33 cases after 2 dropping) and a control group (34 cases after 1 dropping). Patients in the observation group were treated with joss stick moxibustion combined with pricking and cupping at local ashi points for 7 times, once every other day. Oral acyclovir, vitamin B 1 and mecobalamin tablets were applied in the control group for continuous 14 days, and interferon injection was used for continuous 6 days, etc. The herpes evaluation indexes of blister stopping time, scab time and decrustation time as well as pain intensity were observed before and after treatment. Peripheral serum substance P (SP) content of herpes local situation was detected. The comprehensive effects were evaluated. The blister stopping time, scab time and decrustation time in the observation group were shorter than those in the control group (all P 0.05). The pain beginning to ease time and duration time in the observation group were better than those in the control group (both P 0.05). The cured rate of the observation group was better than that of the control group [66.7% (22/33) vs 58.8% (20/34), P cupping are effective for herpes zoster, which have quicker and good analgesic effects than conventional western medication. Its mechanism may be related to reducing the content of SP more fast and to a larger degree.

Intervention study of needle stick injury in Iran

International Nuclear Information System (INIS)

Mobasherizadeh, Sina; Abne-Shahidi, Sayed A.; Mohammadi, Nazafarin A.; Abazari, Fereshteh

2005-01-01

Injury resulting from contaminated sharp devices among health care workers (HCWs) is one of the most important concerns in medical centers. This can lead to dangerous infections such as human immunodeficiency virus, hepatitis B virus and hepatitis C virus among such people. The documentation of needle stick injuries started in Sadi Hospital, Isfahan, Iran in 2003, and our objective was to study cases of injuries by sharp devices before and after the implementation of intervention methods. In an intervention survey of the type of before and after study, we studied injuries by needle and other sharp devices among 87 HCWs in Sadi Hospital, a private hospital in Isfahan, Iran, during the years 2003-2004. The groups under study were workers and paramedical staff; and the wards under study included surgery, internal, lab, x-ray and laundry. We entered and evaluated the data in SPSS software. In the first phase of the study in 2003, 55.2% of those injured had been injured by sharp devices. After intervention in 2004, this percentage was reduced to 19.5% (p < 0.05). At the beginning of the study, 26.4% of the injured had been injured by sharp devices more than twice, and at the end of the study this number was reduced to 2.3% (p < 0.05). Also, injuries resulting from recapping were 45.8% at the beginning of the study, which was reduced to 5.9% at the end (p < 0.05). With regard to this study and other studies carried out in other countries, a large number of injuries by contaminated sharp devices can be prevented by implementing suitable educational programs regarding disposal of sharp devices, and by using safe needle devices. (author)

Drawing of metals inclined to sticking to tools surfaces

International Nuclear Information System (INIS)

Vatrushin, L.S.; Osintsev, V.G.

1975-01-01

A technological process is described of coating metals and alloys which have a tendency to stick to tools during rolling and drawing of wires and pipes. For electrodeposition it is the best to use chlorides of tin, bismuth, zinc, copper and indium bromide or a combination of metal salts with nonmetallic salts. Such coatings are applied to such stock materials as stainless steel, Kh18N10T and titanium alloys, VT1-0, OT4, VT16, VT20. The speeds employed during wire drawing reach 8-15 m/min and during rolling- 1-3.6 m/min. When applying a mixture of zinc chloride and nonmetallic salt the surface of titanium and zirconium alloys is first coated with a metallic sublayer. In drawing and rolling pipes of T10 alloys, the degree of elongation between the intermediate annealings reach 6.34%, and for alloys 100, VT1-0 and VT22- 23, 10 and 2.3% respectively. The coating has a strong adhesion to base metal and good plasticity characteristics. Industrial-scale tests show that a preliminary zinc coating on zirconium semi-finished stock makes it possible to shorten the technological process 1.5 times and achieve a twofold decrease in labor intensiveness and the cost of the treatment, to obtain a 7% increase in the output of non-detective product and to exclude sandblasting and hand scouring. Preliminary estimates indicate that about 4.4 thousand rubles per ton of wire can be saved by using the coating procedure

Sticking your neck out and burying the hatchet: what idioms reveal about embodied simulation.

Science.gov (United States)

Kacinik, Natalie A

2014-01-01

Idioms are used in conventional language twice as frequently as metaphors, but most research, particularly recent work on embodiment has focused on the latter. However, idioms have the potential to significantly deepen our understanding of embodiment because their meanings cannot be derived from their component words. To determine whether sensorimotor states could activate idiomatic meaning, participants were instructed to engage in postures/actions reflecting various idioms (e.g., sticking your neck out) relative to non-idiomatic control postures/actions while reading and responding to statements designed to assess idiomatic meaning. The results showed that statements were generally more strongly endorsed after idiom embodiment than control conditions, indicating that the meaning of idiomatic expressions may not be as disconnected from perceptual and motor experiences than previously thought. These findings are discussed in terms of the mirror neuron system and the necessity of pluralistic contributions from both sensorimotor and amodal linguistic systems to fully account for the representation and processing of idioms and other figurative expressions.

Sticking your neck out and burying the hatchet: What idioms reveal about embodied simulation

Directory of Open Access Journals (Sweden)

Natalie A Kacinik

2014-09-01

Full Text Available Idioms are used in conventional language twice as frequently as metaphors, but most research, particularly recent work on embodiment has focused on the latter. However, idioms have the potential to significantly deepen our understanding of embodiment because their meanings cannot be derived from their component words. To determine whether sensorimotor states could activate idiomatic meaning, participants were instructed to engage in postures/actions reflecting various idioms (e.g., sticking your neck out relative to non-idiomatic control postures/actions while reading and responding to statements designed to assess idiomatic meaning. The results showed that statements were generally more strongly endorsed after idiom embodiment than control conditions, indicating that the meaning of idiomatic expressions may not be as disconnected from perceptual and motor experiences than previously thought. These findings are discussed in terms of the mirror neuron system and the necessity of pluralistic contributions from both sensorimotor and amodal linguistic systems to fully account for the representation and processing of idioms and other figurative expressions.

Sticking your neck out and burying the hatchet: what idioms reveal about embodied simulation

Science.gov (United States)

Kacinik, Natalie A.

2014-01-01

Idioms are used in conventional language twice as frequently as metaphors, but most research, particularly recent work on embodiment has focused on the latter. However, idioms have the potential to significantly deepen our understanding of embodiment because their meanings cannot be derived from their component words. To determine whether sensorimotor states could activate idiomatic meaning, participants were instructed to engage in postures/actions reflecting various idioms (e.g., sticking your neck out) relative to non-idiomatic control postures/actions while reading and responding to statements designed to assess idiomatic meaning. The results showed that statements were generally more strongly endorsed after idiom embodiment than control conditions, indicating that the meaning of idiomatic expressions may not be as disconnected from perceptual and motor experiences than previously thought. These findings are discussed in terms of the mirror neuron system and the necessity of pluralistic contributions from both sensorimotor and amodal linguistic systems to fully account for the representation and processing of idioms and other figurative expressions. PMID:25309381

Laboratory triggering of stick-slip events by oscillatory loading in the presence of pore fluid with implications for physics of tectonic tremor

Science.gov (United States)

Bartlow, Noel M.; Lockner, David A.; Beeler, Nicholas M.

2012-01-01

The physical mechanism by which the low-frequency earthquakes (LFEs) that make up portions of tectonic (also called non-volcanic) tremor are created is poorly understood. In many areas of the world, tectonic tremor and LFEs appear to be strongly tidally modulated, whereas ordinary earthquakes are not. Anomalous seismic wave speeds, interpreted as high pore fluid pressure, have been observed in regions that generate tremor. Here we build upon previous laboratory studies that investigated the response of stick-slip on artificial faults to oscillatory, tide-like loading. These previous experiments were carried out using room-dry samples of Westerly granite, at one effective stress. Here we augment these results with new experiments on Westerly granite, with the addition of varying effective stress using pore fluid at two pressures. We find that raising pore pressure, thereby lowering effective stress can significantly increase the degree of correlation of stick-slip to oscillatory loading. We also find other pore fluid effects that become important at higher frequencies, when the period of oscillation is comparable to the diffusion time of pore fluid into the fault. These results help constrain the conditions at depth that give rise to tidally modulated LFEs, providing confirmation of the effective pressure law for triggering and insights into why tremor is tidally modulated while earthquakes are at best only weakly modulated.

Evaluation of purity with its uncertainty value in high purity lead stick by conventional and electro-gravimetric methods.

Science.gov (United States)

Singh, Nahar; Singh, Niranjan; Tripathy, S Swarupa; Soni, Daya; Singh, Khem; Gupta, Prabhat K

2013-06-26

A conventional gravimetry and electro-gravimetry study has been carried out for the precise and accurate purity determination of lead (Pb) in high purity lead stick and for preparation of reference standard. Reference materials are standards containing a known amount of an analyte and provide a reference value to determine unknown concentrations or to calibrate analytical instruments. A stock solution of approximate 2 kg has been prepared after dissolving approximate 2 g of Pb stick in 5% ultra pure nitric acid. From the stock solution five replicates of approximate 50 g have been taken for determination of purity by each method. The Pb has been determined as PbSO4 by conventional gravimetry, as PbO2 by electro gravimetry. The percentage purity of the metallic Pb was calculated accordingly from PbSO4 and PbO2. On the basis of experimental observations it has been concluded that by conventional gravimetry and electro-gravimetry the purity of Pb was found to be 99.98 ± 0.24 and 99.97 ± 0.27 g/100 g and on the basis of Pb purity the concentration of reference standard solutions were found to be 1000.88 ± 2.44 and 1000.81 ± 2.68 mg kg-1 respectively with 95% confidence level (k = 2). The uncertainty evaluation has also been carried out in Pb determination following EURACHEM/GUM guidelines. The final analytical results quantifying uncertainty fulfills this requirement and gives a measure of the confidence level of the concerned laboratory. Gravimetry is the most reliable technique in comparison to titremetry and instrumental method and the results of gravimetry are directly traceable to SI unit. Gravimetric analysis, if methods are followed carefully, provides for exceedingly precise analysis. In classical gravimetry the major uncertainties are due to repeatability but in electro-gravimetry several other factors also affect the final results.

Development and evaluation of a drop-and-stick method to assess landing skills in various levels of competitive surfers.

Science.gov (United States)

Tran, Tai T; Lundgren, Lina; Secomb, Josh; Farley, Oliver R; Haff, G Gregory; Newton, Robert U; Nimphius, Sophia; Sheppard, Jeremy M

2015-04-01

The purpose of this study was to develop and evaluate a drop-and-stick (DS) test method and to assess dynamic postural control in senior elite (SE), junior elite (JE), and junior development (JD) surfers. Nine SE, 22 JE, and 17 JD competitive surfers participated in a single testing session. The athletes completed 5 drop-and-stick trials barefoot from a predetermined box height (0.5 m). The lowest and highest time-to-stabilization (TTS) trials were discarded, and the average of the remaining trials was used for analysis. The SE group demonstrated excellent single-measures repeatability (ICC = .90) for TTS, whereas the JE and JD demonstrated good single-measures repeatability (ICC .82 and .88, respectively). In regard to relative peak landing force (rPLF), SE demonstrated poor single-measures reliability compared with JE and JD groups. Furthermore, TTS for the SE (0.69 ± 0.13 s) group was significantly (P = .04) lower than the JD (0.85 ± 0.25 s). There were no significant (P = .41) differences in the TTS between SE (0.69 ± 0.13 s) and JE (0.75 ± 0.16 s) groups or between the JE and JD groups (P = .09). rPLF for the SE (2.7 ± 0.4 body mass; BM) group was significantly lower than the JE (3.8 ± 1.3 BM) and JD (4.0 ± 1.1 BM), with no significant (P = .63) difference between the JE and JD groups. A possible benchmark approach for practitioners would be to use TTS and rPLF as a qualitative measure of dynamic postural control using a reference scale to discriminate among groups.

Investigations of a Possible Chemical Effect of Salvadora persica Chewing Sticks

Directory of Open Access Journals (Sweden)

Reham Albabtain

2017-01-01

Full Text Available Salvadora persica is commonly used chewing sticks in many parts of the world as an oral hygiene tool. This study measured the amount of benzyl isothiocyanate (BITC released into the mouth and assessed its retention time in saliva. The study also tested if the released amount of BITC could potentially be antibacterial or cytotoxic. Twelve subjects brushed their teeth with fresh Miswak once, twice, and four times. The amount of BITC in the saliva and in the used brushes was quantified using gas chromatography-mass spectrometry. The antibacterial effect of BITC and Miswak essential oil (MEO was tested against Haemophilus influenzae, Aggregatibacter actinomycetemcomitans, and Porphyromonas gingivalis. The cytotoxic effect on gingival fibroblasts and keratinocytes was tested using MTT. The highest amount of the active compounds was detected in saliva after using the Miswak tip for once and immediately. It significantly decreased when the Miswak tip was used more than once and thus after 10 min. The growth of the tested bacteria was inhibited by MEO and BITC in a dose dependent manner, P. gingivalis being the most sensitive. MTT assay showed that BITC and MEO were cytotoxic towards gingival fibroblasts while oral keratinocytes showed resistance. This study suggests that the Miswak tip should be cut before each use to ensure the maximum effect.

Correlation between fuel rack sticking and unintentional re-starting of EDG

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Cheol; Chung, Woo geun; Kang, Seung Hee; Kim, Myeong hoon [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

The Emergency Diesel Generator (EDG) was being tested after overhaul maintenance. While the EDG was running at the rated speed (450 rpm), an operator pressed the manual stop button. But the EDG failed to stop and unintentionally started again. After the unintentional re-start, the EDG maintained running speed of 340 rpm. In the category of a governing system, this paper analyzes the cause of unintentional restart of the EDG that unintentionally re-started and maintained a speed at 340 rpm. The results of the analysis were then verified by a test run. Finally, we identified a correlation between fuel rack sticking and unintentional re-starting of the EDG. An analysis was conducted to confirm the cause of an EDG which was unintentionally restarting and running at 340rpm (rated speed is 450 rpm). Through a test run, it was confirmed that the results of the analysis are correct. The cause of the EDG unintentionally restarting was that it still rotated at 55 rpm over the minimum starting speed at the moment when the shutdown cylinder stopped blocking the fuel, because of a stuck fuel rack at the R7 cylinder. At the same time, the fuel that had been supplied into the cylinders (combustion chamber) by the governing system exploded and the EDG restarted unintentionally.

End of life environmental assessment of micro technologies: the need for the carrot or the stick?

DEFF Research Database (Denmark)

De Grave, Arnaud; Gentil, Emmanuel; Hansen, Hans Nørgaard

2010-01-01

The paper presents the importance of understanding the environmental implications of the end of life of micro technology. A brief overview of different management approaches of micro waste is shown, such as landfill, incineration, recycling, reuse and prevention is given. However, the management...... of waste is subject to a number of directives and regulations (in Europe) or a “stick” forcing the industry to minimise the environmental impacts of micro waste. In contrast, there are strong drivers, the “carrot” that can stimulate the industry to design micro technology following EcoDesign principle....... On one hand the industry is faced with legal sticks to minimise the impacts of waste, on the other hand the industry is offered a number of carrots that could present strong financial and environmental advantages compared to other products providing the same service....

The risk on contact people with different serotypes of sticks the Yersinia

Directory of Open Access Journals (Sweden)

Nimfa Maria Stojek

2011-03-01

Full Text Available Experts are anxious because “American serotype” Yersinia entorocolitica O:8 unexpectedly appeared in Europe in the years 2000 because of its high pathogenicity. The aim of the investigations was to determine people risk contact with different serotypes of Yersinia, based on serological investigations in the years 1997–99 in relation to current epidemiological situation. The study covered 573 sera, from 300 healthy persons and 157 suspicious of yersiniosis, and 116 suspicious of other zoonosis. Tests were performed by passive hemaglutination reaction with antigens viewed as pathogenic to humans Y. enterocolitica O:3, O:5, O:6, O:8, O:9 and Y. pseudotuberculosis group I and III. The most frequently detected antibodies were anti-Y.e. O:5 (41,2% and then anti-Y.e. O:8 (36,6%, anti-Y.e. O;3 (20,1%, anti-Y.e. O;6 (9,2%, anti-Y.e. O:9 (4,6% and anti-Y. pseudotuberculosis I i III (11,8% and 10,3%. The results of investigations show, that already in the years 1997–1999 over 30% of population had contact with Yersinia sticks, including serotypes thought as pathogenic: Y. enterocolitica O:3 (20,1 %, Y. enterocolitica O:9 (4,6 % and particularly with Y. enterocolitica O:8 (36,6 %.

Water motion and movement without sticking, weight loss and cross-contaminant in superhydrophobic glass tube.

Science.gov (United States)

Yuan, Jian-Jun; Jin, Ren-Hua

2010-02-10

We report that a simple fabrication of a superhydrophobic nanosurface consisted of a grass-like silica thin film on the inner wall of a glass tube and its feature in water motion and water movement. The glass tube with a superhydrophobic inner wall can make the water flow with friction-drag reduction and completely preventing water sticking. Transferring water by this tube did not cause weight loss at all. Therefore, aqueous solutions containing high content metal ions were cross-moved without washing the tube used and no cross-contamination occurred after cross-movement. Furthermore, in an inside diameter of 6.0 mm glass tube where the half-length of the inner surface is covered by superhydrophobic nanograss and the other half is an unmodified hydrophilic surface, the water droplets flowing down from the hydrophilic side can be stopped spontaneously at the hydrophilic-superhydrophobic boundary as if there is an invisible flow-stopping fence built inside the glass tube.

Design and properties of a cryogenic dip-stick scanning tunneling microscope with capacitive coarse approach control.

Science.gov (United States)

Schlegel, R; Hänke, T; Baumann, D; Kaiser, M; Nag, P K; Voigtländer, R; Lindackers, D; Büchner, B; Hess, C

2014-01-01

We present the design, setup, and operation of a new dip-stick scanning tunneling microscope. Its special design allows measurements in the temperature range from 4.7 K up to room temperature, where cryogenic vacuum conditions are maintained during the measurement. The system fits into every (4)He vessel with a bore of 50 mm, e.g., a transport dewar or a magnet bath cryostat. The microscope is equipped with a cleaving mechanism for cleaving single crystals in the whole temperature range and under cryogenic vacuum conditions. For the tip approach, a capacitive automated coarse approach is implemented. We present test measurements on the charge density wave system 2H-NbSe2 and the superconductor LiFeAs which demonstrate scanning tunneling microscopy and spectroscopy data acquisition with high stability, high spatial resolution at variable temperatures and in high magnetic fields.

Prevalence and correlates of needle-stick injuries among active duty police officers in Tijuana, Mexico.

Science.gov (United States)

Mittal, María Luisa; Beletsky, Leo; Patiño, Efraín; Abramovitz, Daniela; Rocha, Teresita; Arredondo, Jaime; Bañuelos, Arnulfo; Rangel, Gudelia; Strathdee, Steffanie A

2016-01-01

Police officers are at an elevated risk for needle-stick injuries (NSI), which pose a serious and costly occupational health risk for HIV and viral hepatitis. However, research on NSIs among police officers is limited, especially in low- and middle-income countries. Despite the legality of syringe possession in Mexico, half of people who inject drugs (PWID) in Tijuana report extrajudicial syringe-related arrests and confiscation by police, which has been associated with needle-sharing and HIV infection. We assessed the prevalence and correlates of NSIs among Tijuana police officers to inform efforts to improve occupational safety and simultaneously reduce HIV risks among police and PWID. Tijuana's Department of Municipal Public Safety (SSPM) is among Mexico's largest. Our binational, multi-sectoral team analyzed de-identified data from SSPM's 2014 anonymous self-administered occupational health survey. The prevalence of NSI and syringe disposal practices was determined. Logistic regression with robust variance estimation via generalized estimating equations identified factors associated with ever having an occupational NSI. Approximately one-quarter of the Tijuana police force was given the occupational health survey (N=503). Respondents were predominantly male (86.5%) and ≤35 years old (42.6%). Nearly one in six officers reported ever having a NSI while working at SSPM (15.3%), of whom 14.3% reported a NSI within the past year. Most participants reported encountering needles/syringes while on duty (n=473, 94%); factors independently associated with elevated odds of NSIs included frequently finding syringes that contain drugs (adjusted odds ratio (AOR): 2.98; 95% confidence interval (CI): 1.56-5.67) and breaking used needles (AOR: 2.25; 95% CI: 1.29-3.91), while protective factors included being willing to contact emergency services in case of NSIs (AOR: 0.39; 95% CI: 0.22-0.69), and wearing needle-stick resistant gloves (AOR: 0.43; 95% CI: 0.19-0.91). Tijuana

Ecological niche dimensionality and the evolutionary diversification of stick insects.

Directory of Open Access Journals (Sweden)

Patrik Nosil

Full Text Available The degree of phenotypic divergence and reproductive isolation between taxon pairs can vary quantitatively, and often increases as evolutionary divergence proceeds through various stages, from polymorphism to population differentiation, ecotype and race formation, speciation, and post-speciational divergence. Although divergent natural selection promotes divergence, it does not always result in strong differentiation. For example, divergent selection can fail to complete speciation, and distinct species pairs sometimes collapse ('speciation in reverse'. Widely-discussed explanations for this variability concern genetic architecture, and the geographic arrangement of populations. A less-explored possibility is that the degree of phenotypic and reproductive divergence between taxon pairs is positively related to the number of ecological niche dimensions (i.e., traits subject to divergent selection. Some data supporting this idea stem from laboratory experimental evolution studies using Drosophila, but tests from nature are lacking. Here we report results from manipulative field experiments in natural populations of herbivorous Timema stick insects that are consistent with this 'niche dimensionality' hypothesis. In such insects, divergent selection between host plants might occur for cryptic colouration (camouflage to evade visual predation, physiology (to detoxify plant chemicals, or both of these niche dimensions. We show that divergent selection on the single niche dimension of cryptic colouration can result in ecotype formation and intermediate levels of phenotypic and reproductive divergence between populations feeding on different hosts. However, greater divergence between a species pair involved divergent selection on both niche dimensions. Although further replication of the trends reported here is required, the results suggest that dimensionality of selection may complement genetic and geographic explanations for the degree of

An experimental and theoretical investigation of stick-slip, steady-state and roughness dominated sliding in fiber-reinforced composites

International Nuclear Information System (INIS)

Mackin, T.J.

1995-01-01

The mechanical properties of fiber reinforced composites depends strongly upon the properties of the fiber/matrix interface. Enhanced fracture resistance and strain to failure are synonymous with debonding and sliding of the reinforcement phase. Thus, the two key properties of the composite are the interfacial toughness and the post-debond sliding stress. After debonding a variety of interfacial sliding phenomena are noted, including: stick-slip, steady-state, and roughness dominated sliding. The interfacial properties, including the coefficient of friction, the radial clamping pressure, asperity amplitude, the elastic properties of the constituents, and the compliance of the test machine, each play a role in the operative sliding phenomenon. Experiments have been conducted to explore each of these phenomena. In addition, models have been developed that rationalize all of the observed behavior

Accurate alpha sticking fractions from improved three-body calculations relevant for muon catalyzed fusion. Progress report, September 1, 1985-August 31, 1986

International Nuclear Information System (INIS)

Szalewicz, K.; Monkhorst, H.J.

1986-04-01

A solution of the Coulomb three-body problem is the beginning point for calculations of sticking fractions in muon catalyzed fusion. The basis set is constructed from the following functions xi/sup r/n/sup s/e/sup - αxi - β n/R/sup -3 /2//H/sub eta/(x)exp(-x 2 /2), where xi and eta are elliptic coordinates of muon, R is the internuclear distance, H/sub eta/ is the nth Hermite polynomial, and x = γ (R-R/sub e/). The nonlinear parameters α, β, γ, and R/sub e/ are to be optimized. 21 refs., 1 tab

Meat species identification and Halal authentication using PCR analysis of raw and cooked traditional Turkish foods.

Science.gov (United States)

Ulca, Pelin; Balta, Handan; Çağın, Ilknur; Senyuva, Hamide Z

2013-07-01

The method performance characteristics of commercially available PCR kits for animal species identification were established. Comminuted meat products containing different levels of pork were prepared from authentic beef, chicken, and turkey. These meat products were analysed in the raw state and after cooking for 20 min at 200 °C. For both raw and cooked meats, the PCR kit could correctly identify the animal species and could reliably detect the addition of pork at a level below 0.1%. A survey of 42 Turkish processed meat products such as soudjouk, salami, sausage, meatball, cured spiced beef and doner kebap was conducted. Thirty-six samples were negative for the presence of pork (meatball sample labelled as 100% beef was found to contain chicken. Another turkey meatball sample was predominantly chicken. Copyright © 2013 Elsevier Ltd. All rights reserved.

Thermonuclear fusion plasma produced by lasers

International Nuclear Information System (INIS)

Yamanaka, C.; Yokoyama, M.; Nakai, S.; Sasaki, T.; Yoshida, K.; Matoba, M.; Yamabe, C.; Tschudi, T.; Yamanaka, T.; Mizui, J.; Yamaguchi, N.; Nishikawa, K.

1975-01-01

Recently, much attention has been focused on laser fusion schemes using high-density plasmas produced by implosion. Scientific-feasibility laser-fusion experiments are now in time. But the physics of interaction between laser and plasma, the high-compression technique and the development of high-power lasers are still important problems to be solved if laser fusion is to make some progress. In the field of laser-plasma coupling, experiments were carried out in which hydrogen and deuterium sticks were bombarded by laser beams; in these experiments, a glass-laser system, LETKKO-I, with an energy of 50 J in a nanosecond pulse, and a double-discharge TEA CO 2 laser system with an energy of 100 J in a 100-ns pulse were used. A decrease in reflectivity occurred at a laser intensity one order of magnitude higher than the parametric-instability threshold. Self-phase modulation of scattered light due to modulational instability was found. A Brillouin-backscattering isotope effect due to the hydrogen and deuterium plasma has also been observed in the red-side part of the SHG-light. Preliminary compression experiments have been carried out using a glass-laser system LETKKO-II, with an energy of 250-1000 J in a ns-pulse. A hologram has been used to study shock waves in the plasma due to the SHG-light converted from the main laser beam. Development of high-power lasers has been promoted, such as disc-glass lasers, E-beam CO 2 lasers and excimer lasers. (author)

Membrane Distillation of Meat Industry Effluent with Hydrophilic Polyurethane Coated Polytetrafluoroethylene Membranes

Directory of Open Access Journals (Sweden)

M. G. Mostafa

2017-09-01

Full Text Available Meat rendering operations produce stick water waste which is rich in proteins, fats, and minerals. Membrane distillation (MD may further recover water and valuable solids, but hydrophobic membranes are contaminated by the fats. Here, commercial hydrophobic polytetrafluorethylene (PTFE membranes with a hydrophilic polyurethane surface layer (PU-PTFE are used for the first time for direct contact MD (DCMD on real poultry, fish, and bovine stick waters. Metal membrane microfiltration (MMF was also used to capture fats prior to MD. Although the standard hydrophobic PTFE membranes failed rapidly, PU-PTFE membranes effectively processed all stick water samples to colourless permeate with sodium rejections >99%. Initial clean solution fluxes 5–6 L/m2/h declined to less than half during short 40% water recovery tests for all stick water samples. Fish stick water uniquely showed reduced fouling and up to 78% water recovery. Lost flux was easily restored by rinsing the membrane with clean water. MMF prior to MD removed 92% of fats, facilitating superior MD performance. Differences in fouling between stick waters were attributed to temperature polarisation from higher melt temperature fats and relative proportions to proteins. Hydrophilic coated MD membranes are applicable to stick water processing but further studies should consider membrane cleaning and longer-term stability.

Membrane Distillation of Meat Industry Effluent with Hydrophilic Polyurethane Coated Polytetrafluoroethylene Membranes.

Science.gov (United States)

Mostafa, M G; Zhu, Bo; Cran, Marlene; Dow, Noel; Milne, Nicholas; Desai, Dilip; Duke, Mikel

2017-09-29

Meat rendering operations produce stick water waste which is rich in proteins, fats, and minerals. Membrane distillation (MD) may further recover water and valuable solids, but hydrophobic membranes are contaminated by the fats. Here, commercial hydrophobic polytetrafluorethylene (PTFE) membranes with a hydrophilic polyurethane surface layer (PU-PTFE) are used for the first time for direct contact MD (DCMD) on real poultry, fish, and bovine stick waters. Metal membrane microfiltration (MMF) was also used to capture fats prior to MD. Although the standard hydrophobic PTFE membranes failed rapidly, PU-PTFE membranes effectively processed all stick water samples to colourless permeate with sodium rejections >99%. Initial clean solution fluxes 5-6 L/m²/h declined to less than half during short 40% water recovery tests for all stick water samples. Fish stick water uniquely showed reduced fouling and up to 78% water recovery. Lost flux was easily restored by rinsing the membrane with clean water. MMF prior to MD removed 92% of fats, facilitating superior MD performance. Differences in fouling between stick waters were attributed to temperature polarisation from higher melt temperature fats and relative proportions to proteins. Hydrophilic coated MD membranes are applicable to stick water processing but further studies should consider membrane cleaning and longer-term stability.

Integration of topological modification within the modeling of multi-physics systems: Application to a Pogo-stick

Science.gov (United States)

Abdeljabbar Kharrat, Nourhene; Plateaux, Régis; Miladi Chaabane, Mariem; Choley, Jean-Yves; Karra, Chafik; Haddar, Mohamed

2018-05-01

The present work tackles the modeling of multi-physics systems applying a topological approach while proceeding with a new methodology using a topological modification to the structure of systems. Then the comparison with the Magos' methodology is made. Their common ground is the use of connectivity within systems. The comparison and analysis of the different types of modeling show the importance of the topological methodology through the integration of the topological modification to the topological structure of a multi-physics system. In order to validate this methodology, the case of Pogo-stick is studied. The first step consists in generating a topological graph of the system. Then the connectivity step takes into account the contact with the ground. During the last step of this research; the MGS language (Modeling of General System) is used to model the system through equations. Finally, the results are compared to those obtained by MODELICA. Therefore, this proposed methodology may be generalized to model multi-physics systems that can be considered as a set of local elements.

What Governs Ice-Sticking in Planetary Science Experiments?

Science.gov (United States)

Gaertner, Sabrina; Gundlach, B.; Blum, J.; Fraser, H. J.

2018-06-01

Water ice plays an important role, alongside dust, in current theories of planet formation. Decades of laboratory experiments have proven that water ice is far stickier in particle collisions than dust. However, water ice is known to be a metastable material. Its physical properties strongly depend on its environmental parameters, the foremost being temperature and pressure. As a result, the properties of ice change not only with the environment it is observed in, but also with its thermal history.The abundance of ice structures that can be created by different environments likely explains the discrepancies observed across the multitude of collisional laboratory studies in the past [1-16]; unless the ices for such experiments have been prepared in the same way and are collided under the same environmental conditions, these experiments simply do not collide the same ices.This raises several questions:1. Which conditions and ice properties are most favourable for ice sticking?2. Which conditions and ice properties are closest to the ones observed in protoplanetary disks?3. To what extent do these two regimes overlap?4. Consequently, which collisional studies are most relevant to planetary science and therefore best suited to inform models of planet formation?In this presentation, I will give a non-exhaustive overview of what we already know about the properties of ice particles, covering those used in planetary science experiments and those observed in planet forming regions. I will discuss to what extent we can already answer questions 1-3, and what information we still need to obtain from observations, laboratory experiments, and modelling to be able to answer question 4.References:1. Bridges et al. 1984 Natur 309.2. Bridges et al. 1996 Icar 123.3. Deckers & Teiser 2016 MNRAS 456.4. Dilley & Crawford 1996 JGRE 101.5. Gundlach & Blum 2015 ApJ 798.6. Hatzes et al. 1991 Icar 89.7. Hatzes et al. 1988 MNRAS 231.8. Heißelmann et al. 2010 Icar 206.9. Higa et al. 1996 P

Carrots that Look Like Sticks

DEFF Research Database (Denmark)

Al-Ubaydli, Omar; Andersen, Steffen; Gneezy, Uri

Constructing compensation schemes for effort in multi-dimensional tasks is complex, particularly when some dimensions are not easily observable. When incentive schemes contractually reward workers for easily observed measures, such as quantity produced, the standard model predicts that unrewarded...... dimensions, such as quality, will be neglected. Yet, there remains mixed empirical evidence in favor of this standard principal-agent model prediction. This paper reconciles the literature by using both theory and empirical evidence. The theory outlines conditions under which principals can use a piece rate...

Carrots that Look Like Sticks

DEFF Research Database (Denmark)

Al-Ubaydli, Omar; Andersen, Steffen; Gneezy, Uri

2015-01-01

Constructing compensation schemes for effort in multi-dimensional tasks is complex, particularly when some dimensions are not easily observable. When incentive schemes contractually reward workers for easily observed measures, such as quantity produced, the standard model predicts that unrewarded...... dimensions, such as quality, will be neglected. Yet, there remains mixed empirical evidence in favor of this standard principal-agent model prediction. This paper reconciles the literature by using both theory and empirical evidence. The theory outlines conditions under which principals can use a piece rate...

Needle stick injuries among dental students: risk factors and recommendations for prevention

Science.gov (United States)

Gaballah, Kamis; Warbuton, Dorothy; Sihmbly, Kamal; Renton, Tara

2012-01-01

Aim To evaluate the risk factors of needle stick injuries (NSIs) sustained by undergraduate dental students and nurse students at the King's College London (KCL) Dental Institute. Materials and methods A retrospective study evaluated the incident reports relating to NSIs reported over a period of 2 years. Factors including the dental department, study year, and when the injury took place during administration of local anaesthesia (LA) and recapping conventional syringe or clearing work surface or during disposal. Results This report showed that students are at the highest risk of NSIs at the fourth year of their 5-year BDS course. About one-third of injuries were reported among this group of students followed by year 5 students (25%). Oral surgery clinics were the major source of incident reporting when compared with other specialised dental clinics within the institute. The left hands of the students were the most frequently affected by such injuries and then the right hands of student dental nurses. The attempt of needle recapping of conventional syringes was the least reported mechanism of injuries and constituted only 15% of the total injuries and mainly occurred in third year students. The most frequent injuries among student nurses were during disposal of the needle. Conclusion Less NSIs occur when using safety syringes. A non-recapping policy with immediate disposal of either the conventional or safety syringe systems after injection would prevent all clearance-related NSIs sustained by nurses. To avoid NSIs, education plays a vital role particularly with effective implementation of the change to safety syringes with appropriate training. PMID:22741025

Needle stick injuries among dental students: risk factors and recommendations for prevention

Directory of Open Access Journals (Sweden)

Kamis Gaballah

2012-06-01

Full Text Available Aim: To evaluate the risk factors of needle stick injuries (NSIs sustained by undergraduate dental students and nurse students at the King's College London (KCL Dental Institute. Materials and methods: A retrospective study evaluated the incident reports relating to NSIs reported over a period of 2 years. Factors including the dental department, study year, and when the injury took place during administration of local anaesthesia (LA and recapping conventional syringe or clearing work surface or during disposal. Results: This report showed that students are at the highest risk of NSIs at the fourth year of their 5-year BDS course. About one-third of injuries were reported among this group of students followed by year 5 students (25%. Oral surgery clinics were the major source of incident reporting when compared with other specialised dental clinics within the institute. The left hands of the students were the most frequently affected by such injuries and then the right hands of student dental nurses. The attempt of needle recapping of conventional syringes was the least reported mechanism of injuries and constituted only 15% of the total injuries and mainly occurred in third year students. The most frequent injuries among student nurses were during disposal of the needle. Conclusion: Less NSIs occur when using safety syringes. A non-recapping policy with immediate disposal of either the conventional or safety syringe systems after injection would prevent all clearance-related NSIs sustained by nurses. To avoid NSIs, education plays a vital role particularly with effective implementation of the change to safety syringes with appropriate training.

Recidivism and rehabilitation of criminal offenders: a carrot and stick evolutionary game.

Directory of Open Access Journals (Sweden)

Bijan Berenji

Full Text Available Motivated by recent efforts by the criminal justice system to treat and rehabilitate nonviolent offenders rather than focusing solely on their punishment, we introduce an evolutionary game theoretic model to study the effects of "carrot and stick" intervention programs on criminal recidivism. We use stochastic simulations to study the evolution of a population where individuals may commit crimes depending on their past history, surrounding environment and, in the case of recidivists, on any counseling, educational or training programs available to them after being punished for their previous crimes. These sociological factors are embodied by effective parameters that determine the decision making probabilities. Players may decide to permanently reform or continue engaging in criminal activity, eventually reaching a state where they are considered incorrigible. Depending on parameter choices, the outcome of the game is a society with a majority of virtuous, rehabilitated citizens or incorrigibles. Since total resources may be limited, we constrain the combined punishment and rehabilitation costs per crime to be fixed, so that increasing one effort will necessarily decrease the other. We find that the most successful strategy in reducing crime is to optimally allocate resources so that after being punished, criminals experience impactful intervention programs, especially during the first stages of their return to society. Excessively harsh or lenient punishments are less effective. We also develop a system of coupled ordinary differential equations with memory effects to give a qualitative description of our simulated societal dynamics. We discuss our findings and sociological implications.

Physico-mechanical comparison of urea formaldehyde bonded particle board manufactured from jute sticks and wood of Trewia nudiflora

Directory of Open Access Journals (Sweden)

Abu Saleh Md. Golam Kibria

2012-12-01

Full Text Available This study is to know the physical and mechanical properties of particle board made up of jute sticks (jutex board and wood chips (woodex board of Trewia nudiflora. Two leading particle board manufacturing industries of Bangladesh were selected first which have the same manufacturing process and adhesive composition. Boards of available thicknesses were collected randomly. From each thickness category, three replications were taken. The parameters were studied as adhesive composition,mass of a board, density, bending strength, modulus of elasticity,surface soundness, tensile strength, screw withdrawal, pressure and pressing time. Urea formaldehyde resin is used to manufacture both types of particle board. For achieving the greater efficiency of boards, some chemical compounds were mixed with the resin. Due to the change in thicknesses, boards were not always different in terms of the physical and mechanical properties. Moreover, except the modulus of elasticity (MOE, woodex boards were superior to the properties of jutex boards. 

Metal-Embedded Porous Graphitic Carbon Fibers Fabricated from Bamboo Sticks as a Novel Cathode for Lithium-Sulfur Batteries.

Science.gov (United States)

Zhang, Xuqing; Zhong, Yu; Xia, Xinhui; Xia, Yang; Wang, Donghuang; Zhou, Cheng'ao; Tang, Wangjia; Wang, Xiuli; Wu, J B; Tu, Jiangping

2018-04-25

Lithium-sulfur batteries (LSBs) are deemed to be among the most prospective next-generation advanced high-energy batteries. Advanced cathode materials fabricated from biological carbon are becoming more popular due to their unique properties. Inspired by the fibrous structure of bamboo, herein we put forward a smart strategy to convert bamboo sticks for barbecue into uniform bamboo carbon fibers (BCF) via a simple hydrothermal treatment proceeded in alkaline solution. Then NiCl 2 is used to etch the fibers through a heat treatment to achieve Ni-embedded porous graphitic carbon fibers (PGCF/Ni) for LSBs. The designed PGCF/Ni/S electrode exhibits improved electrochemical performances including high initial capacity (1198 mAh g -1 at 0.2 C), prolonged cycling life (1030 mAh g -1 at 0.2 C after 200 cycles), and improved rate capability. The excellent properties are attributed to the synergistic effect of 3D porous graphitic carbon fibers with highly conductive Ni nanoparticles embedded.

The modified inverse hockey stick technique for adjuvant irradiation after mastectomy

International Nuclear Information System (INIS)

Kukolowicz, P.; Selerski, B.; Kuszewski, T.; Wieczorek, A.

2004-01-01

To present the technique of irradiation of post-mastectomy patients used in the Holycross Cancer Centre in Kielce.The paper presents a detailed description of the technique which is referred to as the 'modified inverse hockey stick technique (MIHS)'. The dosimetric characteristic of dose distribution for the MIHS technique is presented basing on dose distributions calculated for 40 patients. The measurements used to evaluate dose distribution included standard deviation of the dose in the Planning Target Volume (PTV) and the percentage of the PTV volume receiving a dose larger than 110% and smaller than 90%; the lung volume received at least 20 Gy (LV20) and the heart volume received at least 30 Gy (HV30). The distribution of the electron beam energy is also presented. The standard deviation of the dose in the PTV was approx. 10% in a majority of patients. About 12% of the PTV volume received a dose more than 10% smaller than intended and about 10% of the PTV volume received a dose more than 10% greater than intended. For patients irradiated on the left side of the chest wall the LV20 was always lesser than 25% and for patients irradiated on the right side of the chest wall - always less than 35%, except for one patient, in whom it reached 37%. The HV30 was always below 8%. The MIHS technique is a safe and reliable modality. The main advantages of the technique include very convenient and easily repeated positioning of the patient and small doses applied to the organs at risk. The individually calculated bolus plays an important role in diminishing the dose to the lung and heart. The disadvantages of the technique include poor dose homogeneity within the PTV and long matching lines of the electron and photon beams. (author)

Stick-slip Cycles and Tidal Modulation of Ice Stream Flow

Science.gov (United States)

Lipovsky, B.; Dunham, E. M.

2016-12-01

The reactivation of a single dormant Antarctic ice stream would double the continent's mass imbalance. Despite importance of understanding the likelihood of such an event, direct observation of the basal processes that lead to the activation and stagnation of streaming ice are minimal. As the only ice stream undergoing stagnation, the Whillans Ice Plain (WIP) occupies a central role in our understanding of these subglacial processes. Complicating matters is the observation, from GPS records, that the WIP experiences most of its motion during episodes of rapid sliding. These sliding events are tidally modulated and separated by 12 hour periods of quiescence. We conduct numerical simulations of ice stream stick-slip cycles. Our simulations include rate- and state-dependent frictional sliding, tidal forcing, inertia, upstream loading in a cross-stream, thickness-averaged formulation. Our principal finding is that ice stream motion may respond to ocean tidal forcing with one of two end member behaviors. In one limit, tidally modulated slip events have rupture velocities that approach the shear wave speed and slip events have a duration that scales with the ice stream width divided by the shear wave speed. In the other limit, tidal modulation results in ice stream sliding velocities with lower amplitude variation but at much longer timescales, i.e. semi-diurnal and longer. This latter behavior more closely mimics the behavior of several active ice streams (Bindschadler, Rutford). We find that WIP slip events exist between these two end member behaviors: rupture velocities are far below the inertial limit yet sliding occurs only episodically. The continuum of sliding behaviors is governed by a critical ice stream width over which slip event nucleate. When the critical width is much longer than the ice stream width, slip events are unable to nucleate. The critical width depends on the subglacial effective pressure, ice thickness, and frictional and elastic constitutive

Effects of acoustic waves on stick-slip in granular media and implications for earthquakes

Science.gov (United States)

Johnson, P.A.; Savage, H.; Knuth, M.; Gomberg, J.; Marone, Chris

2008-01-01

It remains unknown how the small strains induced by seismic waves can trigger earthquakes at large distances, in some cases thousands of kilometres from the triggering earthquake, with failure often occurring long after the waves have passed. Earthquake nucleation is usually observed to take place at depths of 10-20 km, and so static overburden should be large enough to inhibit triggering by seismic-wave stress perturbations. To understand the physics of dynamic triggering better, as well as the influence of dynamic stressing on earthquake recurrence, we have conducted laboratory studies of stick-slip in granular media with and without applied acoustic vibration. Glass beads were used to simulate granular fault zone material, sheared under constant normal stress, and subject to transient or continuous perturbation by acoustic waves. Here we show that small-magnitude failure events, corresponding to triggered aftershocks, occur when applied sound-wave amplitudes exceed several microstrain. These events are frequently delayed or occur as part of a cascade of small events. Vibrations also cause large slip events to be disrupted in time relative to those without wave perturbation. The effects are observed for many large-event cycles after vibrations cease, indicating a strain memory in the granular material. Dynamic stressing of tectonic faults may play a similar role in determining the complexity of earthquake recurrence. ??2007 Nature Publishing Group.

A facile prestrain-stick-release assembly of stretchable supercapacitors based on highly stretchable and sticky hydrogel electrolyte

Science.gov (United States)

Tang, Qianqiu; Chen, Mingming; Wang, Gengchao; Bao, Hua; Saha, Petr

2015-06-01

A facile prestrain-stick-release assembly strategy for the stretchable supercapacitor device is developed based on a novel Na2SO4-aPUA/PAAM hydrogel electrolyte, saving the stretchable rubber base conventionally used. The Na2SO4-aPUA/PAAM hydrogel electrolyte exhibits high stretchability (>1000%), electrical conductivity (0.036 S cm-1) and stickiness. Due to the unique features of the hydrogel electrolyte, the carbon nanotube@MnO2 film electrodes can be firmly stuck to two sides of the prestrained hydrogel electrolyte. Then, by releasing the hydrogel electrolyte, homogenous buckles are formed for the film electrodes to get a full stretchable supercapacitor device. Besides, the high stickiness of the hydrogel electrolyte ensures its strong adhesion with the film electrodes, facilitating ion and electronic transfer of the supercapacitor. As a result, excellent electrochemical performance is achieved with the specific capacitance of 478.6 mF cm-2 at 0.5 mA cm-2 (corresponding to 201.1 F g-1) and capacitance retention of 91.5% after 3000 charging-discharging cycles under 150% strain, which is the best for the stretchable supercapacitors.

Forty-nine cases of insomnia treated by acupoint catgut-embedding therapy in combination with auricular point sticking%穴位埋线配合耳穴贴压治疗失眠49例

Institute of Scientific and Technical Information of China (English)

郝玉林; WANG Fang

2011-01-01

@@ Insomnia is defined as difficulty in falling into sleep and failure to acquire normal sleep, resulting in short sleep time, even staying asleep the whole night in serious case, which impacts on the normal daytime activity and brings the deep pains to the patients.The author had treated 49 cases of insomnia with acupoint catgut-embedding therapy in combination with auricular point sticking from February 2008 to August 2009.The report is as follows.

Incense, sparklers and cigarettes are significant contributors to indoor benzene and particle levels

Directory of Open Access Journals (Sweden)

Werner Tirler

2015-03-01

Full Text Available Introduction. The increased use of incense, magic candles and other flameless products often produces indoor pollutants that may represent a health risk for humans. Today, in fact, incense and air fresheners are used inside homes as well as in public places including stores, shopping malls and places of worship. As a source of indoor contamination, the impact of smoke, incense and sparklers on human health cannot be ignored. Aim. In the present work, we report the results of an emission study regarding particles (PM10 and particle number concentration, PNC and benzene, produced by various incense sticks and sparklers. Results and discussion.The results obtained for benzene, PM10 and PNC, showed a strong negative influence on air quality when these products were used indoors. Various incense sticks gave completely different benzene results: from a small increase of the benzene concentration in the air, just slightly above the background levels of ambient air, to very high concentrations, of more than 200 µg/m³ of benzene in the test room after the incense sticks had been tested.

Incense, sparklers and cigarettes are significant contributors to indoor benzene and particle levels.

Science.gov (United States)

Tirler, Werner; Settimo, Gaetano

2015-01-01

The increased use of incense, magic candles and other flameless products often produces indoor pollutants that may represent a health risk for humans. Today, in fact, incense and air fresheners are used inside homes as well as in public places including stores, shopping malls and places of worship. As a source of indoor contamination, the impact of smoke, incense and sparklers on human health cannot be ignored. In the present work, we report the results of an emission study regarding particles (PM10 and particle number concentration, PNC) and benzene, produced by various incense sticks and sparklers. The results obtained for benzene, PM10 and PNC, showed a strong negative influence on air quality when these products were used indoors. Various incense sticks gave completely different benzene results: from a small increase of the benzene concentration in the air, just slightly above the background levels of ambient air, to very high concentrations, of more than 200 µg/m of benzene in the test room after the incense sticks had been tested.

Fat and Moisture Content in Chinese Fried Bread Sticks: Assessment and Rapid Near-Infrared Spectroscopic Method Development

Directory of Open Access Journals (Sweden)

Zhuqing Xiao

2013-01-01

Full Text Available Fried bread sticks (FBS are one of the most widely consumed deep fried food products in China. Understanding the fat and moisture content in FBS will help consumers make healthy food choices as well as assist food processors to provide FBS with desirable quality. Rapid Fourier transform near-infrared methods (FT-NIR were developed for determining fat and moisture content in FBS collected from 123 different vendors in Shanghai, China. FBS samples with minimum sample preparation (either finely or coarsely ground were used for NIR analyses. Spectra of FBS were treated with different mathematic pretreatments before being used to build models between the spectral information and fat (7.71%–30.89% or moisture (17.39%–32.65% content in FBS. Finely ground samples may lead to slightly more robust PLS models, but the particle sizes of ground FBS samples did not seriously affect the predictability of the models with appropriate mathematical treatments. The fat and moisture content in FBS predicted by FT-NIR methods had very good correlation with their values determined via traditional methods (fat, R2=0.965; moisture, R2=0.983, which clearly indicated that FT-NIR methods could be used as an effective tool for rapid determination of fat and moisture content in FBS.

Spatiotemporal evolution of premonitory fault slip prior to stick-slip instability: New insight into the earthquake preparation

Science.gov (United States)

Zhuo, Y. Q.; Liu, P.; Guo, Y.; Ji, Y.; Ma, J.

2017-12-01

Premonitory fault slip, which begins with quasistatic propagation followed by quasidynamic propagation, may be a key clue bridging the "stick" state and "slip" state of a fault. More attentions have been paid for a long time to the temporal resolution of measurement than the spatial resolution, leading to the incomplete interpretation for the spatial evolution of premonitory slip, particularly during the quasistatic phase. In the present study, measurement of the quasistatic propagation of premonitory slip is achieved at an ultrahigh spatial resolution via a digital image correlation method. Multiple premonitory slip zones are observed and found to be controlled spatially by the fault contact heterogeneity, particularly the strong contact patches that prevent the propagation of premonitory slip and accumulate strain. As a result, premonitory slip is accelerated within constrained week contact spaces and consequently triggers the breakout of quasidynamic propagation. The results provide new insights into the quasistatic propagation of premonitory slip and may offer new interpretations for the earthquake nucleation process. This work is fund by the National Natural Science Foundation of China (Grant No. 41572181), the Basic Scientific Funding of Chinese National Nonprofit Institutes (Grant No. IGCEA1415, IGCEA1525), and the Early-Stage Work of Key Breakthrough Plan in Seismology from China Earthquake Administration.

Systematic study of influence of growth parameters on island morphology during molecular beam epitaxy growth: A Monte Carlo study

International Nuclear Information System (INIS)

Shankar Prasad Shrestha; Park, C.-Y.

2006-05-01

We have made a systematic study of influence of diffusion flux ratio (D/F), diffusional anisotropy (DA) and sticking anisotropy (SA) on island morphology to show the influence of each growth parameter on island morphology in presence of the other growth parameters. Our results show that the influence of D/F ratio and DA on island morphology depends on the sticking anisotropy of the adatoms. At the intermediate anisotropic case, increase in D/F ratio results in transition of the island morphology from 1d nature to 2 d nature. In anisotropic diffusion case, D/F ratio can change the growth direction of the island morphology. We also find that only sticking anisotropy is not sufficient to produce elongated islands, low D/F ratio is also essential. (author)

Students nurses' knowledge and prevalence of Needle Stick Injury in Jordan.

Science.gov (United States)

Suliman, Mohammad; Al Qadire, Mohammad; Alazzam, Manar; Aloush, Sami; Alsaraireh, Arwa; Alsaraireh, Faris A

2018-01-01

Student nurses are at high risk of blood-borne pathogens transmitted via Needle Stick Injury (NSI). Understanding various aspects of NSI is essential if they are to avoid the risks associated with it. The study was conducted to measure student nurses' level of knowledge about NSI and to examine its prevalence and post-exposure measures in Jordan. A cross-sectional and descriptive design was used. A sample of 279 student nurses studying at one private and four government universities distributed throughout Jordan. The study used an online survey composed of 22 questions developed from NSI literature. The questionnaire was divided into three parts: background, to measure students' demographics; knowledge, to measure nurses' understanding of NSI; and prevalence, to measure exposure to NSI and the follow-up measures. Student nurses were recruited through Facebook. The survey was available online for one full semester in 2016/2017. The total number of completed surveys was 279 (response rate=61%). Most of the students were female (n=198; 71%), in their fourth year (n=114; 40.9%). Their mean age was 21years (SD=2.5). The mean score for the knowledge part was 7 out of 10 (SD=1.7). Almost a third of the students had at least one incident of exposure to NSI (n=73; 26.2%). Most of the students who had suffered NSI did not inform their clinical instructors (67.1%) or write an incident report (86.3%). The results showed that there was no significant difference in the knowledge total scores between males and females or between students across different universities. However, a significant difference was found between students in different years of study (F (276, 2)=6.77, p=0.001). Student nurses in Jordan have a moderate understanding of issues regarding NSI. This knowledge improved with seniority. However, exposure to NSI and its under-reporting is a prevalent problem. This study recommends focusing on NSI in the nursing curriculum, and providing more protection and post

Looking Islam in the Teeth: The Social Life of a Somali Toothbrush.

Science.gov (United States)

Laird, Lance D; Barnes, Linda L; Hunter-Adams, Jo; Cochran, Jennifer; Geltman, Paul L

2015-09-01

The Arabic miswak (Somali, adayge) is a tooth-cleaning stick from the Salvadora persica plant. In this article, we trace the social life of a "thing," examining meanings inscribed in the stick brush, drawing on interviews with 82 Somali refugees in Massachusetts and an analysis of local and transnational science and marketing. The miswak toothbrush symbolizes relationships to nature, homeland culture, global Islam, globalizing dental medicine, and the divine as it intersects with the lives of producers, marketers, distributors, and users, creating hybrid cultural forms in new contexts. © 2015 by the American Anthropological Association.

Foreshocks and Aftershocks Detected from Stick-slip Events on a 3 m Biaxial Apparatus and their Relationship to Quasistatic Nucleation and Wear Processes

Science.gov (United States)

Wu, S.; Mclaskey, G.

2017-12-01

We investigate foreshocks and aftershocks of dynamic stick-slip events generated on a newly constructed 3 m biaxial friction apparatus at Cornell University (attached figure). In a typical experiment, two rectangular granite blocks are squeezed together under 4 or 7 MPa of normal pressure ( 4 or 7 million N on a 1 m2 fault surface), and then shear stress is increased until the fault slips 10 - 400 microns in a dynamic rupture event similar to a M -2 to M -3 earthquake. Some ruptures nucleate near the north end of the fault, where the shear force is applied, other ruptures nucleate 2 m from the north end of the fault. The samples are instrumented with 16 piezoelectric sensors, 16 eddy current sensors, and 8 strain gage rosettes, evenly placed along the fault to measure vertical ground motion, local slip, and local stress, respectively. We studied sequences of tens of slip events and identified a total of 194 foreshocks and 66 aftershocks located within 6 s time windows around the stick-slip events and analyzed their timing and locations relative to the quasistatic nucleation process. We found that the locations of the foreshocks and aftershocks were distributed all along the length of the fault, with the majority located at the ends of the fault where local normal and shear stress is highest (caused by both edge effects and the finite stiffness of the steel frame surrounding the granite blocks). We also opened the laboratory fault and inspected the fault surface and found increased wear at the sample ends. To explore the foreshocks' and aftershocks' relationship to the nucleation and afterslip, we compared the occurrence of foreshocks to the local slip rate on the laboratory fault closest to each foreshock in space and time. We found that that majority of foreshocks were generated from local slip rates between 1 and 100 microns/s, though we were not able to resolve slip rate lower than about 1 micron/s. Our experiments provide insight into how foreshocks and

"Let's stick together"--a grounded theory exploration of interprofessional working used to provide person centered chronic back pain services.

Science.gov (United States)

Howarth, Michelle; Warne, Tony; Haigh, Carol

2012-11-01

Chronic back pain is a global phenomenon and a common reason why patients seek help from health professionals. Person-centered interprofessional working is acknowledged as the main strategy for chronic back pain management; however, the complexity of chronic pain can present significant challenges for teams. Although methods used by interprofessional teams to collaborate have been previously explored, how they work together to deliver person-centered chronic back pain care has received limited attention. The aim of this study was to explore person-centered care from the perspectives of people with chronic back pain and the interprofessional teams who cared for them. A grounded theory methodology was used to capture the interprofessional team's perspectives of person-centered working. A purposive sample of four chronic back pain management teams participated in semi-structured face-to-face interviews and focus groups. Data were thematically analyzed using a constant comparative method. Three categories emerged, collective efficacy, negotiated space and team maturity, which illustrated the attributes of interprofessional teams that influenced person-centered working. The findings suggest that collective efficacy matures over time within a negotiated coalesced space and re-enforces the need for teams to stick together to ensure effective person-centered care.

Determination of the concentration of alum additive in deep-fried dough sticks using dielectric spectroscopy

Directory of Open Access Journals (Sweden)

Wenyu Kang

2015-09-01

Full Text Available The concentration of alum additive in deep-fried dough sticks (DFDSs was investigated using a coaxial probe method based on dielectric properties in the 0.3–10-GHz frequency range. The dielectric spectra of aqueous solutions with different concentrations of alum, sodium bicarbonate, and mixtures thereof were used. The correspondence between dielectric loss and alum concentration was thereby revealed. A steady, uniform correspondence was successfully established by introducing ω·ε″(ω, the sum of dielectric loss and conductor loss (i.e., total loss, according to the electrical conductivity of the alum-containing aqueous solutions. Specific, resonant-type dielectric dispersion arising from alum due to atomic polarization was identified around 1 GHz. This was used to discriminate the alum additive in the DFDS from other ingredients. A quantitative relationship between alum and sodium bicarbonate concentrations in the aqueous solutions and the differential dielectric loss Δε″(ω at 0.425 GHz was also established with a regression coefficient over 0.99. With the intention of eliminating the effects of the chemical reactions with sodium bicarbonate and the physical processes involved in leavening and frying during preparation, the developed technique was successfully applied to detect the alum dosage in a commercial DFDS (0.9942 g/L. The detected value agreed well with that determined using graphite furnace atomic absorption spectrometry (0.9722 g/L. The relative error was 2.2%. The results show that the proposed dielectric differential dispersion and loss technique is a suitable and effective method for determining the alum content in DFDSs.

Linking the Pilot Structural Model and Pilot Workload

Science.gov (United States)

Bachelder, Edward; Hess, Ronald; Aponso, Bimal; Godfroy-Cooper, Martine

2018-01-01

Behavioral models are developed that closely reproduced pulsive control response of two pilots using markedly different control techniques while conducting a tracking task. An intriguing find was that the pilots appeared to: 1) produce a continuous, internally-generated stick signal that they integrated in time; 2) integrate the actual stick position; and 3) compare the two integrations to either issue or cease a pulse command. This suggests that the pilots utilized kinesthetic feedback in order to sense and integrate stick position, supporting the hypothesis that pilots can access and employ the proprioceptive inner feedback loop proposed by Hess's pilot Structural Model. A Pilot Cost Index was developed, whose elements include estimated workload, performance, and the degree to which the pilot employs kinesthetic feedback. Preliminary results suggest that a pilot's operating point (parameter values) may be based on control style and index minimization.

Ash formation and deposition in coal and biomass fired combustion systems: Progress and challenges in the field of ash particle sticking and rebound behavior

DEFF Research Database (Denmark)

Kleinhans, Ulrich; Wieland, Christoph; Frandsen, Flemming J.

2018-01-01

. The impaction of solid, molten or partially molten particles on surfaces is dependent on the particle and surface characteristics. For instance, a particulate deposit might capture incoming particles or be removed due to erosion, while a molten layer will collect all impacting particles, no matter...... if they are sticky or not. The main properties affecting the particle stickiness are the viscosity and surface tension for silicate-rich ashes. On the contrary, the stickiness of salt-rich ashes – typical for herbaceous biomass and wood- or waste-based fuels – is often described using the liquid melt fraction......, their required parameters are discussed and typical particle and surface properties found in combustion systems, are summarized. Eight different sticking criteria are implemented in a computational fluid dynamics code and computations are compared against measurements from an entrained flow reactor. Uniform...

A Virtual Joy-Stick Study of Emotional Responses and Social Motivation in Children with Autism Spectrum Disorder.

Science.gov (United States)

Kim, Kwanguk; Rosenthal, M Zachary; Gwaltney, Mary; Jarrold, William; Hatt, Naomi; McIntyre, Nancy; Swain, Lindsay; Solomon, Marjorie; Mundy, Peter

2015-12-01

A new virtual reality task was employed which uses preference for interpersonal distance to social stimuli to examine social motivation and emotion perception in children with Autism Spectrum Disorders. Nineteen high function children with higher functioning Autism Spectrum Disorder (HFASD) and 23 age, gender, and IQ matched children with typical development (TD) used a joy stick to position themselves closer or further from virtual avatars while attempting to identify six emotions expressed by the avatars, happiness, fear, anger, disgust, sadness, and surprise that were expressed at different levels of intensity. The results indicated that children with HFASD displayed significantly less approach behavior to the positive happy expression than did children with TD, who displayed increases in approach behavior to higher intensities of happy expressions. Alternatively, all groups tended to withdraw from negative emotions to the same extent and there were no diagnostic group differences in accuracy of recognition of any of the six emotions. This pattern of results is consistent with theory that suggests that some children with HFASD display atypical social-approach motivation, or sensitivity to the positive reward value of positive social-emotional events. Conversely, there was little evidence that a tendency to withdraw from social-emotional stimuli, or a failure to process social emotional stimuli, was a component of social behavior task performance in this sample of children with HFASD.

Sticking non-stick: Surface and Structure control of Diamond-like Carbon in Plasma Enhanced Chemical Vapour Deposition

Science.gov (United States)

Jones, B. J.; Nelson, N.

2016-10-01

This short review article explores the practical use of diamond-like carbon (DLC) produced by plasma enhanced chemical vapour deposition (PECVD). Using as an example issues relating to the DLC coating of a hand-held surgical device, we draw on previous works using atomic force microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, scanning electron microscopy, tensiometry and electron paramagnetic resonance. Utilising data from these techniques, we examine the surface structure, substrate-film interface and thin film microstructure, such as sp2/sp3 ratio (graphitic/diamond-like bonding ratio) and sp2 clustering. We explore the variations in parameters describing these characteristics, and relate these to the final device properties such as friction, wear resistance, and diffusion barrier integrity. The material and device characteristics are linked to the initial plasma and substrate conditions.

Sticking non-stick: Surface and Structure control of Diamond-like Carbon in Plasma Enhanced Chemical Vapour Deposition

International Nuclear Information System (INIS)

Jones, B J; Nelson, N

2016-01-01

This short review article explores the practical use of diamond-like carbon (DLC) produced by plasma enhanced chemical vapour deposition (PECVD). Using as an example issues relating to the DLC coating of a hand-held surgical device, we draw on previous works using atomic force microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, scanning electron microscopy, tensiometry and electron paramagnetic resonance. Utilising data from these techniques, we examine the surface structure, substrate-film interface and thin film microstructure, such as sp 2 /sp 3 ratio (graphitic/diamond-like bonding ratio) and sp 2 clustering. We explore the variations in parameters describing these characteristics, and relate these to the final device properties such as friction, wear resistance, and diffusion barrier integrity. The material and device characteristics are linked to the initial plasma and substrate conditions. (paper)

The Prevalence of Accidental Needle Stick Injury and their Reporting among Healthcare Workers in Orthopaedic Wards in General Hospital Melaka, Malaysia

Directory of Open Access Journals (Sweden)

Bhardwaj A

2014-07-01

Full Text Available Accidental needle-stick injuries (NSIs are a hazard for health-care workers and general public health. Orthopaedic surgeons may be more prone to NSIs due to the prevalence of bone spikes in the operative field and the use of sharp orthopaedic instruments such as drills, saws and wires. A hospital-based cross sectional study was conducted in the orthopedic wards of Melaka General Hospital. The prevalence of NSIs was 32 (20.9% and majority of it occurred during assisting in operation theatre 13(37.4%. Among them six (18.8% were specialist, 12(37.5% medical officer, 10 (31.2% house officer and four staff nurses (12.5%. Among the respondents 142 (92.8% had been immunized against Hepatitis B and 148 (96.7% participants had knowledge regarding universal precaution. The incidence of NSI among health care workers at orthopaedics ward was not any higher in comparison with the similar studies and it was found out that the prevalence was more in junior doctors compared with specialist and staff nurses and it was statistically significant.

Knowledge and beliefs among health care workers regarding hepatitis B infection and needle stick injuries at a tertiary care hospital, Karachi

International Nuclear Information System (INIS)

Habib, F.; Zafar, A.

2011-01-01

Hepatitis B virus (HBV) infection is a recognized occupational risk for health care workers (HCWs). This study aimed to assess the knowledge and beliefs of HCWs regarding HBV transmission and needle stick injuries (NSIs). A cross-sectional questionnaire based KAP study was conducted at Civil Hospital, Karachi, during the period of January to September 2006. HCWs were inquired about possible modes of HBV transmission and association with NSIs. Data were entered using EpiInfo 6.04d software. Statistical analysis was performed using SPSS 12.5 software. A total of 343 HCWs participated, and those answered at least 5 correct modes of HBV transmission were considered knowledgeable. Knowledgeable group was more likely to report NSIs (p < 0.006), more vaccinated (p < 0.001) and were also more likely to attend awareness session (p < 0.009). Overall knowledge were inadequate and behaviour and attitude towards clinical practices were found compromised. To reduce the occupational risk, effort should be focused to establish effective infection control program and training of staff. (author)

Frequency of vaccination and exposure to needle-stick sharp injuries among a group of nurses in Turkey: a meta regression analysis

International Nuclear Information System (INIS)

Kosgeroglu, N.; Ayranci, U.; Sahin, F.; Sayiner, D.; Ozerdogan, N.

2010-01-01

Objectives: To determine the prevalence of needle stick sharps injuries (NSSIs) and the frequency of vaccination, and to determine the risk of exposure to hepatitis B virus (HBV) and hepatitis C virus (HCV) infections. Methodology: We found 14 NSSIs-related studies conducted between January 1996 and January 2006 in Turkey. Out of those, 10 studies selected according to systematic review were related to vaccination. Analyses were prepared using a Meta Regression Analysis. Results: In 14 case-control studies, the rate of NSSIs among nurses for the last year was found to be 64%. The frequency of injury among nurses aged 30 and below when compared to that of nurses aged 31 and over was 1.071-fold higher. The frequency of vaccination among nurses in the age of 30 and under was 1.01 fold lower when compared to those in the age of 31 and over. Conclusions: We conclude that the prevention of NSSIs through education and training of nurses, especially younger nurses, is of great importance. (author)

Teaching: the Wave Mechanics of McLeods' Stringy Electron, Explicit Nucleons, and Through-the-Earth Projections of Constellations' Stick Figures

Science.gov (United States)

McLeod, Roger David; McLeod, David Matthew

2012-02-01

This shows how Hooke's law, for electron, proton and neutron, 2D and 3D, strings, builds electromagnetic string-waves, extending, and pleasing, Schr"odinger. These are composed of spirally linked, parallel, north-pole oriented, neutrino and antineutrino strings, stable by magnetic repulsions. Their Dumbo Proton is antineutrino-scissor cut, and compressed in the vicinity of a neutron star, where electrostatic marriage occurs with a neutrino-scissor cut, and compressed, electron, so a Mickey Neutron emerges. Strings predict: electron charge is - 1/3 e, Dumbo P is 25 % longer than Mickey N, and Hooke says relaxing springs fuel three, separate, non-eternal, inflations, after Big Bangs. Gravity is strings, longitudinally linked. Einstein says Herman Grid's black diagonals prove human vision reads its information from algebraically-signed electromagnetic field distributions, (diffraction) patterns, easily known by ray-tracing, not requiring difficult Spatial Fourier Transformation. High-schoolers understand its application to Wave Mechanics, agreeing that positive-numbered probabilities do not enter, to possibly displease God. Detected stick-figure forms of constellations: like Phoenix, Leo, Canis Major, and especially Orion, fool some observers into false beliefs in things like UFHumanoids, or Kokopelli, Pele and Pamola!

Hybridogenesis and a potential case of R2 non-LTR retrotransposon horizontal transmission in Bacillus stick insects (Insecta Phasmida).

Science.gov (United States)

Scavariello, Claudia; Luchetti, Andrea; Martoni, Francesco; Bonandin, Livia; Mantovani, Barbara

2017-02-06

Horizontal transfer (HT) is an event in which the genetic material is transferred from one species to another, even if distantly related, and it has been demonstrated as a possible essential part of the lifecycle of transposable elements (TEs). However, previous studies on the non-LTR R2 retrotransposon, a metazoan-wide distributed element, indicated its vertical transmission since the Radiata-Bilateria split. Here we present the first possible instances of R2 HT in stick insects of the genus Bacillus (Phasmida). Six R2 elements were characterized in the strictly bisexual subspecies B. grandii grandii, B. grandii benazzii and B. grandii maretimi and in the obligatory parthenogenetic taxon B. atticus. These elements were compared with those previously retrieved in the facultative parthenogenetic species B. rossius. Phylogenetic inconsistencies between element and host taxa, and age versus divergence analyses agree and support at least two HT events. These HT events can be explained by taking into consideration the complex Bacillus reproductive biology, which includes also hybridogenesis, gynogenesis and androgenesis. Through these non-canonical reproductive modes, R2 elements may have been transferred between Bacillus genomes. Our data suggest, therefore, a possible role of hybridization for TEs survival and the consequent reshaping of involved genomes.

Long-term dynamics of tropical walking sticks in response to multiple large-scale and intense disturbances.

Science.gov (United States)

Willig, Michael R; Presley, Steven J; Bloch, Christopher P

2011-02-01

Understanding the effects of disturbance and secondary succession on spatio-temporal patterns in the abundance of species is stymied by a lack of long-term demographic data, especially in response to infrequent and high intensity disturbances, such as hurricanes. Moreover, resistance and resilience to hurricane-induced disturbance may be mediated by legacies of previous land use, although such interactive effects are poorly understood, especially in tropical environments. We address these central issues in disturbance ecology by analyzing an extensive dataset, spanning the impacts of Hurricanes Hugo and Georges, on the abundance of a Neotropical walking stick, Lamponius portoricensis, in tabonuco rainforest of Puerto Rico during the wet and dry seasons from 1991 to 2007. By synthesizing data from two proximate sites in tabonuco forest, we show that resistance to Hurricane Hugo (97% reduction in abundance) was much less than resistance to Hurricane Georges (21% reduction in abundance). Based on a powerful statistical approach (generalized linear mixed-effects models with Poisson error terms), we documented that the temporal trajectories of abundance during secondary succession (i.e., patterns of resilience) differed between hurricanes and among historical land use categories, but that the effects of hurricanes and land use histories were independent of each other. These complex results likely arise because of differences in the intensities of the two hurricanes with respect to microclimatic effects (temperature and moisture) in the forest understory, as well as to time-lags in the response of L. portoricensis to changes in the abundance and distribution of preferred food plants (Piper) in post-hurricane environments.

Comparing Finger-stick β-Hydroxybutyrate with Dipstick Urine Tests in the Detection of Ketone Bodies

Directory of Open Access Journals (Sweden)

Baris KURU

2014-06-01

Full Text Available SUMMARY: Objectives: Blood ketone (beta-hydroxybutyrate measurements are suggested instead of urine ketone (acetoacetate measurements in the diagnosis of diabetic ketoacidosis. Urine ketone examination is difficult and time consuming, and may result in an incorrect interpretation. Studies performed in emergency departments on blood ketones are limited. Our objective is to compare urine ketones and capillary blood ketones in patients whose serum glucose levels were ≥150 mg/dl. Methods: In our cross-sectional prospective study, finger-stick blood beta-hydroxybutyrate, arterial blood gas and urine ketone measurements of patients whose serum glucose levels were 150 mg/dL and higher were performed in the emergency department. Results: A total of 265 patients were included in the study. The mean age of the patients was 62.4±14.9 years, and 65.7% of them were female. The mean of the capillary blood ketone levels of the patients was determined to be 0.524±0.9 mmol/L (min: 0 mmol/L, max: 6.7 mmol/L. In 29 (13.1% of the 221 patients whose urine ketone levels were negative, the finger-stick blood ketone levels were positive. Three of these patients were severely ketonemic, six were moderately ketonemic, and 20 were mildly ketonemic. Conclusions: In patients admitted to the emergency department with a blood glucose level of 150 mg/dL or higher, performing a capillary blood ketone measurement instead of a urine ketone measurement was a better predictor of ketonemia. ÖZET: Amaç: Diyabetik keto asidoz tanısında idrar ketonu (asetoasetat yerine kan ketonu (beta-hidroksibütirat ölçümü önerilmektedir. İdrar ketonu bakılması zahmetli, zaman alıcı ve yanlış yorumlara yol açabilen bir testtir. Acil servislerde kan ketonu ile ilgili yapılan çalışmalar sınırlıdır. Bu çalışmadaki amacımız serum glikoz düzeyi ≥150 mg/dl tespit edilen hastalarda idrar ketonu ile kapiller kanda keton varlığını karşılaştırmaktır. Gereç ve Y�

Economic activities results and problems of the farm engaged in production of stick tomatoes in Erdemli (Mersin) Province

Science.gov (United States)

Direk, M.; Topkara, S.

2018-03-01

This study was carried out to investigate the socio-economic status of the stick-grown tomatoes located in Erdemli district of Mersin province and to examine the annual activity results and to reveal the problems. The data used in the research were obtained from questionnaires conducted with 44 selected farms by stratified random sampling method. The data obtained is for the 2016 production period. In the farmer surveyed, the operating area per farm was 7.01 da. In the enterprises, the average active capital per farm (69,916 ), 89.62% of the land capital and 2,40% of the operating capital. The ratio of own capital in the passive capital is 85.22%. In the examined farm, the average net yield was 3,150 , the agricultural income was 5,483 , the financial profitability was 4.29% and the economic profitability was 4.39%. As a result of the pie tomato cost analysis, the cost of tomato was determined to be below the tomato sales price. In the study, the cost of 1 kg product was calculated as 0,23 . The surplus supply in the time of the intensive production of tomatoes in the region of the study causes the prices to decrease. For this reason, it is necessary to try to ensure price stability by ensuring balanced distribution of the accrual during the season.

Stick it! Articulated tracking using spatial rigid object priors

DEFF Research Database (Denmark)

Hauberg, Søren; Pedersen, Kim Steenstrup

2010-01-01

the phrased problem is interesting, the resulting algorithm is computationally too demanding to be of practical use. We present a simple and elegant model for describing this problem. The resulting algorithm is computationally much more efficient, while it at the same time produces superior results....

Needle stick injuries during fine needle aspiration procedure: Frequency, causes and knowledge, attitude and practices of cytopathologists

Directory of Open Access Journals (Sweden)

Neeta Kumar

2011-01-01

Full Text Available Background: There is no study available on the frequency, predisposing factors and outcome of needle stick injury (NSI in cytopathologists who perform fine needle aspiration (FNA. Aim: To know the frequency, circumstances and sequlae of NSI sustained by cytopathologists, assess their knowledge about risks of NSI and attitudes and practices towards use of standard precautions and post-injury wound care. Materials and Methods: Study design: cross sectional. Setting: Tertiary care teaching and non-teaching hospitals and private laboratories. Data collection method: Knowledge, attitude and practices survey using a questionnaire. Results: Majority (90.5% of the respondents have had NSI in their total career. In the previous year, more than half (71.4% had at least one NSI (mean 3.2. NSI was the most common in index finger of non-dominant hand (59.6% and occurred during step two of FNA procedure when the needle was being manipulated within the lump. The major predisposing factors were uncooperative patients (88.9%, small children (54%, deep masses (36.5%, hot humid climate (88.9%, heavy workload (76.2% and poor administrative arrangement (54%. The adherence to standard precautions was not optimal (74.6%. None of them reported NSI to the authorities, nor investigated source patient or themselves. 82.5% of the respondents were not aware of any formal exposure reporting system in their hospital. Conclusion: Cytopathologists frequently experience NSI while performing FNA. Frequency of injury is also related to patient characteristics and work site factors. Education and motivation for adhering to standard precautions and post-exposure prophylaxis are often lacking.

Grain Formation Processes in Oxygen-Rich Circumstellar Outflows: Testing the Metastable Eutectic Condensation Hypothesis and Measuring Atom-Grain & Grain-Grain Sticking Coefficients (A Sub-orbital Investigation)

Science.gov (United States)

Nuth, Joseph

hypothesis would be a major step in establishing a simple, chemical kinetic model for the nucleation, growth and annealing of circumstellar oxide dust. Since strong convective flows in the terrestrial laboratory make it almost impossible to measure the growth and aggregation of freshly condensed, refractory grains, we will conduct experiments in microgravity to eliminate these flows. We propose to measure the efficiency of grain growth from simple SiO, AlO and FeO vapors and the sticking coefficients for dust coagulation via analyses of the grain morphology and size distribution of condensates collected and returned to earth during each rocket experiment. We will discuss the unique experimental systems used to produce our analog samples and the general nature of these materials. We note that these experimental systems were not designed to produce samples at equilibrium like typical petrologic systems. Indeed, they were designed to make samples that will help us to understand the properties of materials produced under highly dynamic conditions, quite far from equilibrium, that are often found in nature wherever steep temperature, pressure and/or compositional gradients result in highly unequilibrated solid systems. This design is an advantage as it presents the chance to compare and contrast samples produced at equilibrium with unequilibrated samples in order to identify distinctive traits that could be used to identify conditions under which natural samples have been formed. We will describe both the laboratory system and the rocket payload. We will present data from previous experiments in these systems and discuss why recovery of the flight payload and analyses of the particles produced is essential to build a rigorous, laboratory-based model of grain formation in astrophysical environments.

Spectroscopic characterization of TeF and oxygen chemisorption onto silicon (111)

International Nuclear Information System (INIS)

Newlin, D.E.

1979-01-01

Chemiluminescence from the reactions of H 2 Te and D 2 Te with fluorine was observed at 3900 to 8600 A. Two separate band systems are attributed to the B 2 Σ-X 2 π and A 2 π-X 2 π transitions of the TeF radical. Moessbauer spectra were obtained of H 2 Te and D 2 Te in an argon matrix, and of TeF produced in the reaction of hydrogen telluride with fluorine. These are discussed with respect to the isotope effect and electron density calculations for the tellurium nucleus. Kinetics of chemisorption of oxygen on a silicon (111) surface were studied at 298 to 473 0 K using ESCA. Results are interpreted assuming immobile adsorption requiring two nearest neighbor surface sites. The initial sticking coefficient (theta << 1) is found to be S approx. = 0.1, and the activation energy of adsorption is determined as E/sub a/ = 1.6 +- 0.3 kcal/mole at theta = 0.4. Higher values of the sticking coefficient are obtained when the surface is contaminated with carbon produced at heated filaments in the vacuum system, so any consideration of oxygen adsorption onto an atomically clean silicon surface should use the lower values of the sticking coefficient reported in the literature. Results of this study are consistent with a model for oxygen chemisorption involving two surface sites per oxygen molecule

Benzyl isothiocyanate, a major component from the roots of Salvadora persica is highly active against Gram-negative bacteria.

Directory of Open Access Journals (Sweden)

Abier Sofrata

Full Text Available Plants produce a number of antimicrobial substances and the roots of the shrub Salvadora persica have been demonstrated to possess antimicrobial activity. Sticks from the roots of S. persica, Miswak sticks, have been used for centuries as a traditional method of cleaning teeth. Diverging reports on the chemical nature and antimicrobial repertoire of the chewing sticks from S. persica led us to explore its antibacterial properties against a panel of pathogenic or commensal bacteria and to identify the antibacterial component/s by methodical chemical characterization. S. persica root essential oil was prepared by steam distillation and solid-phase microextraction was used to sample volatiles released from fresh root. The active compound was identified by gas chromatography-mass spectrometry and antibacterial assays. The antibacterial compound was isolated using medium-pressure liquid chromatography. Transmission electron microscopy was used to visualize the effect on bacterial cells. The main antibacterial component of both S. persica root extracts and volatiles was benzyl isothiocyanate. Root extracts as well as commercial synthetic benzyl isothiocyanate exhibited rapid and strong bactericidal effect against oral pathogens involved in periodontal disease as well as against other Gram-negative bacteria, while Gram-positive bacteria mainly displayed growth inhibition or remained unaffected. The short exposure needed to obtain bactericidal effect implies that the chewing sticks and the essential oil may have a specific role in treatment of periodontal disease in reducing Gram-negative periodontal pathogens. Our results indicate the need for further investigation into the mechanism of the specific killing of Gram-negative bacteria by S. persica root stick extracts and its active component benzyl isothiocyanate.

For AAPT: Teaching the Wave Mechanics of McLeods' Stringy Electron, Explicit Nucleons, and Through-the-Earth Projections of Constellations' Stick Figures

Science.gov (United States)

McLeod, David Matthew

2011-11-01

McLeods' NEF11#22 submission is from their same-title INVITED presentation at Frontiers in Optics 2011, San Jose, CA. It shows how Hooke's law for electron, proton and neutron strings build electromagnetic waves from strings. These are composed of spirally linked, parallel, north-pole oriented, neutrino and antineutrino strings, stable because of magnetic repulsions. Their Dumbo Proton is antineutrino-scissor cut, and compressed in the vicinity of a neutron star, where electrostatic marriage occurs with a neutrino-scissor cut, and compressed, electron, so a Mickey Neutron emerges. Strings then predict electron charge is -- 1/3 e, Dumbo P is 25 % longer than Mickey N, and Hooke says relaxing springs fuel three separate inflations after each Big Bang oscillation. Gravity can be strings longitudinally linked. Einstein says Herman Grid's black diagonals prove human vision reads its information from algebraically-signed electromagnetic field diffraction patterns known by ray-tracing, not difficult Spatial Fourier Transformation. High-schoolers understand its application to Wave Mechanics, and agree that positive-numbered probabilities do not enter to possibly displease God. Stick figure constellations detected, like Phoenix, Leo, Canis Major, and especially Orion, fool some observers into false beliefs in things like UFHumanoids, or Kokopelli, Pele and Pamola!

Pectoral sound generation in the blue catfish Ictalurus furcatus.

Science.gov (United States)

Mohajer, Yasha; Ghahramani, Zachary; Fine, Michael L

2015-03-01

Catfishes produce pectoral stridulatory sounds by "jerk" movements that rub ridges on the dorsal process against the cleithrum. We recorded sound synchronized with high-speed video to investigate the hypothesis that blue catfish Ictalurus furcatus produce sounds by a slip-stick mechanism, previously described only in invertebrates. Blue catfish produce a variably paced series of sound pulses during abduction sweeps (pulsers) although some individuals (sliders) form longer duration sound units (slides) interspersed with pulses. Typical pulser sounds are evoked by short 1-2 ms movements with a rotation of 2°-3°. Jerks excite sounds that increase in amplitude after motion stops, suggesting constructive interference, which decays before the next jerk. Longer contact of the ridges produces a more steady-state sound in slides. Pulse pattern during stridulation is determined by pauses without movement: the spine moves during about 14 % of the abduction sweep in pulsers (~45 % in sliders) although movement appears continuous to the human eye. Spine rotation parameters do not predict pulse amplitude, but amplitude correlates with pause duration suggesting that force between the dorsal process and cleithrum increases with longer pauses. Sound production, stimulated by a series of rapid movements that set the pectoral girdle into resonance, is caused by a slip-stick mechanism.

Structural interpretation of “Zulu” oil field, Niger Delta | Ibe | Scientia ...

African Journals Online (AJOL)

Faults were interpreted and identified (F1, F2, and F3) using fault sticks, which was modeled to generate the skeletons. It was observed that the fault skeletons showed pillar gridded pattern that produced the reservoir which shows enclosed anticline structures that serves as a good traps for hydrocarbon accumulation.

Three-Dimensional Reconstruction Optical System Using Shadows Triangulation

Science.gov (United States)

Barba, J. Leiner; Vargas, Q. Lorena; Torres, M. Cesar; Mattos, V. Lorenzo

2008-04-01

In this work is developed a three-dimensional reconstruction system using the Shades3D tool of the Matlab® Programming Language and materials of low cost, such as webcam camera, a stick, a weak structured lighting system composed by a desk lamp, and observation plane in which the object is located. The reconstruction is obtained through a triangulation process that is executed after acquiring a sequence of images of the scene with a shadow projected on the object; additionally an image filtering process is done for obtaining only the part of the scene that will be reconstructed. Previously, it is necessary to develop a calibration process for determining the internal camera geometric and optical characteristics (intrinsic parameters), and the 3D position and orientation of the camera frame relative to a certain world coordinate system (extrinsic parameters). The lamp and the stick are used to produce a shadow which scans the object; in this technique, it is not necessary to know the position of the light source, instead the triangulation is obtained using shadow plane produced by intersection between the stick and the illumination pattern. The webcam camera captures all images with the shadow scanning the object, and Shades3D tool processes all information taking into account captured images and calibration parameters. Likewise, this technique is evaluated in the reconstruction of parts of the human body and its application in the detection of external abnormalities and elaboration of prosthesis or implant.

Biofilm plasmids with a rhamnose operon are widely distributed determinants of the 'swim-or-stick' lifestyle in roseobacters.

Science.gov (United States)

Michael, Victoria; Frank, Oliver; Bartling, Pascal; Scheuner, Carmen; Göker, Markus; Brinkmann, Henner; Petersen, Jörn

2016-10-01

Alphaproteobacteria of the metabolically versatile Roseobacter group (Rhodobacteraceae) are abundant in marine ecosystems and represent dominant primary colonizers of submerged surfaces. Motility and attachment are the prerequisite for the characteristic 'swim-or-stick' lifestyle of many representatives such as Phaeobacter inhibens DSM 17395. It has recently been shown that plasmid curing of its 65-kb RepA-I-type replicon with >20 genes for exopolysaccharide biosynthesis including a rhamnose operon results in nearly complete loss of motility and biofilm formation. The current study is based on the assumption that homologous biofilm plasmids are widely distributed. We analyzed 33 roseobacters that represent the phylogenetic diversity of this lineage and documented attachment as well as swimming motility for 60% of the strains. All strong biofilm formers were also motile, which is in agreement with the proposed mechanism of surface attachment. We established transposon mutants for the four genes of the rhamnose operon from P. inhibens and proved its crucial role in biofilm formation. In the Roseobacter group, two-thirds of the predicted biofilm plasmids represent the RepA-I type and their physiological role was experimentally validated via plasmid curing for four additional strains. Horizontal transfer of these replicons was documented by a comparison of the RepA-I phylogeny with the species tree. A gene content analysis of 35 RepA-I plasmids revealed a core set of genes, including the rhamnose operon and a specific ABC transporter for polysaccharide export. Taken together, our data show that RepA-I-type biofilm plasmids are essential for the sessile mode of life in the majority of cultivated roseobacters.

Reviewing the analysis of silicons produced in Iran; design and construction of furnaces to produce lead glass by sintering and analyzing the end products

International Nuclear Information System (INIS)

Shariatmadar Qoochan, Sharam.

1995-01-01

In this project there was always the need of a furnace and cast; therefore, the work was concentrated on construction the furnace and designing the cast. Many numbers of graphites were prepared and by altering their dimensions it was tried to obtain the best conditions from point of view of material and dimensions. Because in this type of furnace having the proper graphite in fact prepared to work with the furnace, because graphite was the heat transfer to the body and also was the cast of the body. The advantage of using graphite furnaces was the heating up of graphite soon, and there was not the problem of sticking to the cast. The disadvantage was the restriction of dimensions. Therefore, the glass size was also limited. another disadvantage was the temperature range to melt the sample. By varying the glass formulation the melting point of the sample also varied. So that by reducing the lead percentage the melting point increased, and restricted to fabricate glass with low percentage of lead

Reviews Book: Marie Curie: A Biography Book: Fast Car Physics Book: Beautiful Invisible Equipment: Fun Fly Stick Science Kit Book: Quantum Theory Cannot Hurt You Book: Chaos: The Science of Predictable Random Motion Book: Seven Wonders of the Universe Book: Special Relativity Equipment: LabVIEWTM 2009 Education Edition Places to Visit: Edison and Ford Winter Estates Places to Visit: The Computer History Museum Web Watch

Science.gov (United States)

2011-07-01

WE RECOMMEND Fun Fly Stick Science Kit Fun fly stick introduces electrostatics to youngsters Special Relativity Text makes a useful addition to the study of relativity as an undergraduate LabVIEWTM 2009 Education Edition LabVIEW sets industry standard for gathering and analysing data, signal processing, instrumentation design and control, and automation and robotics Edison and Ford Winter Estates Thomas Edison's home is open to the public The Computer History Museum Take a walk through technology history at this computer museum WORTH A LOOK Fast Car Physics Book races through physics Beautiful Invisible The main subject of this book is theoretical physics Quantum Theory Cannot Hurt You A guide to physics on the large and small scale Chaos: The Science of Predictable Random Motion Book explores the mathematics behind chaotic behaviour Seven Wonders of the Universe A textual trip through the wonderful universe HANDLE WITH CARE Marie Curie: A Biography Book fails to capture Curie's science WEB WATCH Web clips to liven up science lessons

The evolution of the Gutenberg-Richter, b-value, throughout periodic and aperiodic stick-slip cycles

Science.gov (United States)

Bolton, D. C.; Riviere, J.; Marone, C.; Johnson, P. A.

2017-12-01

The Gutenberg-Richter earthquake size statistic, b value, is a useful proxy for documenting the state of stress on a fault and understanding precursory phenomena preceding dynamic failure. It has been shown that the b value varies systematically as a function of position within the seismic cycle. Frictional studies on intact rock samples with saw-cut faults have shown that b value decreases continuously preceding failure. For intact rock samples, the spatiotemporal changes in b value are thought to be related to the evolution of asperities and micro-cracks. However, few studies have shown how b value evolves spatially and temporally for fault zones containing gouge and wear materials. We hypothesize that the micromechanical mechanisms acting within fault gouge, such as creation and destruction of force chains, grain rolling, sliding, jamming and fracturing play an important role in the evolution of b value and that they may have distinct signatures during periodic and aperiodic cycles of stick-slip frictional motion. We report results from experiments conducted on simulated fault gouge using a biaxial deformation apparatus in a double-direct shear configuration. Acoustic emissions (AEs) are recorded at 4 MHz from 36 P-polarized piezoelectric transducers, which are embedded in steel blocks located adjacent to the fault zone. We compute the frequency-magnitude distribution of detected AEs using a moving window in events where each window is overlapped by 75%. We report on the evolution of b value as a function of normal stress and gouge layer thickness. For periodic slip events, b value reaches a maximum value immediately after a slip event and decreases continuously until the next failure. Aperiodic slip events show similar trends in b-value initially, however unlike periodic slip events, b value reaches a steady state value before failure occurs. In addition, for periodic slip events the magnitude of the change in b value scales inversely with gouge layer thickness

ORTEP-III: Oak Ridge Thermal Ellipsoid Plot Program for crystal structure illustrations

Energy Technology Data Exchange (ETDEWEB)

Burnett, M.N.; Johnson, C.K.

1996-07-01

This report describes a computer program for drawing crystal structure illustrations. Ball-and-stick type illustrations of a quality suitable for publication are produced with either spheres or thermal-motion probability ellipsoids on the atomic sites. The program can also produce stereoscopic pairs of illustrations which aid in the visualization of complex packing arrangements of atoms and thermal motion patterns. Interatomic distances, bond angles, and principal axes of thermal motion are also calculated to aid the structural study.

Volume 10 No. 6 June 2010 2658 ORGANOLEPTIC EFFECT OF ...

African Journals Online (AJOL)

user

2010-06-06

Jun 6, 2010 ... north coast and at times finds its way near freshwater catfish landing areas. ... products produced due to the type of wood fuel used for smoking have ... trees like mangroves. ... general quality deterioration of smoked fish in Tana Delta area ... liquid food vegetable oil so that fish did not stick during smoking.

A randomized controlled trial of interventions to impede date palm sap contamination by bats to prevent nipah virus transmission in Bangladesh.

Directory of Open Access Journals (Sweden)

Salah Uddin Khan

Full Text Available BACKGROUND: Drinking raw date palm sap is a risk factor for human Nipah virus (NiV infection. Fruit bats, the natural reservoir of NiV, commonly contaminate raw sap with saliva by licking date palm's sap producing surface. We evaluated four types of physical barriers that may prevent bats from contacting sap. METHODS: During 2009, we used a crossover design and randomly selected 20 date palm sap producing trees and observed each tree for 2 nights: one night with a bamboo skirt intervention applied and one night without the intervention. During 2010, we selected 120 trees and randomly assigned four types of interventions to 15 trees each: bamboo, dhoincha (local plant, jute stick and polythene skirts covering the shaved part, sap stream, tap and collection pot. We enrolled the remaining 60 trees as controls. We used motion sensor activated infrared cameras to examine bat contact with sap. RESULTS: During 2009 bats contacted date palm sap in 85% of observation nights when no intervention was used compared with 35% of nights when the intervention was used [p<0.001]. Bats were able to contact the sap when the skirt did not entirely cover the sap producing surface. Therefore, in 2010 we requested the sap harvesters to use larger skirts. During 2010 bats contacted date palm sap [2% vs. 83%, p<0.001] less frequently in trees protected with skirts compared to control trees. No bats contacted sap in trees with bamboo (p<0.001 compared to control, dhoincha skirt (p<0.001 or polythene covering (p<0.001, but bats did contact sap during one night (7% with the jute stick skirt (p<0.001. CONCLUSION: Bamboo, dhoincha, jute stick and polythene skirts covering the sap producing areas of a tree effectively prevented bat-sap contact. Community interventions should promote applying these skirts to prevent occasional Nipah spillovers to human.

Stable, fertile, high polyhydroxyalkanoate producing plants and methods of producing them

Energy Technology Data Exchange (ETDEWEB)

Bohmert-Tatarev, Karen; McAvoy, Susan; Peoples, Oliver P.; Snell, Kristi D.

2015-08-04

Transgenic plants that produce high levels of polyhydroxybutyrate and methods of producing them are provided. In a preferred embodiment the transgenic plants are produced using plastid transformation technologies and utilize genes which are codon optimized. Stably transformed plants able to produce greater than 10% dwt PHS in tissues are also provided.

Fiber-reinforced Composite Resin Prosthesis to Restore Missing ...

African Journals Online (AJOL)

A fiber-reinforced composite inlay-onlay FPD was used for a single posterior tooth replacement in a patient refusing implant for psychological reasons. The FRC-FPD was made of pre-impregnated E-glass fibers (everStick, StickTeck, Turku, Finland) embedded in a resin matrix (Stick Resin, StickTeck, Turku, Finland).

Arterial stick

Science.gov (United States)

... be some throbbing. Why the Test Is Performed Blood transports oxygen, nutrients, waste products, and other materials within ... venous blood) mainly in its content of dissolved gases . Testing arterial blood shows the makeup of the blood before any ...

Stick-Jump (SJ) Evaporation of Strongly Pinned Nanoliter Volume Sessile Water Droplets on Quick Drying, Micropatterned Surfaces.

Science.gov (United States)

Debuisson, Damien; Merlen, Alain; Senez, Vincent; Arscott, Steve

2016-03-22

We present an experimental study of stick-jump (SJ) evaporation of strongly pinned nanoliter volume sessile water droplets drying on micropatterned surfaces. The evaporation is studied on surfaces composed of photolithographically micropatterned negative photoresist (SU-8). The micropatterning of the SU-8 enables circular, smooth, trough-like features to be formed which causes a very strong pinning of the three phase (liquid-vapor-solid) contact line of an evaporating droplet. This is ideal for studying SJ evaporation as it contains sequential constant contact radius (CCR) evaporation phases during droplet evaporation. The evaporation was studied in nonconfined conditions, and forced convection was not used. Micropatterned concentric circles were defined having an initial radius of 1000 μm decreasing by a spacing ranging from 500 to 50 μm. The droplet evaporates, successively pinning and depinning from circle to circle. For each pinning radius, the droplet contact angle and volume are observed to decrease quasi-linearly with time. The experimental average evaporation rates were found to decrease with decreasing pining radii. In contrast, the experimental average evaporation flux is found to increase with decreasing droplet radii. The data also demonstrate the influence of the initial contact angle on evaporation rate and flux. The data indicate that the total evaporation time of a droplet depends on the specific micropattern spacing and that the total evaporation time on micropatterned surfaces is always less than on flat, homogeneous surfaces. Although the surface patterning is observed to have little effect on the average droplet flux-indicating that the underlying evaporation physics is not significantly changed by the patterning-the total evaporation time is considerably modified by patterning, up to a factor or almost 2 compared to evaporation on a flat, homogeneous surface. The closely spaced concentric circle pinning maintains a large droplet radius and

Adsorption behavior of modified Iron stick yam skin with Polyethyleneimine as a potential biosorbent for the removal of anionic dyes in single and ternary systems at low temperature.

Science.gov (United States)

Zhang, Yan-Zhuo; Li, Jun; Zhao, Jing; Bian, Wei; Li, Yun; Wang, Xiu-Jie

2016-12-01

The skin of Iron stick yam (ISY) was modified with Polyethyleneimine (ISY@PEI) and evaluated for use as a potential biosorbent to remove the anionic dyes Sunset yellow (SY), Lemon yellow (LY), and Carmine (CM) from wastewater under low temperature conditions (5-15°C) in single and ternary dye systems. Both in the single and ternary systems, experimental data showed that adsorption capacity reached the highest value at 5°C, and adsorption capacity decreased when the temperature increased (10-50°C). The equilibrium data fitted very well to the Langmuir model and the extended Langmuir isotherm, for the single and ternary systems, respectively. The maximum adsorption capability was 138.92, 476.31, and 500.13mg/g for LY, SY, and CM, respectively, in a single system and 36.63, 303.31, and 294.12mg/g for LY, SY, and CM, respectively, in a ternary system. The adsorption followed pseudo-second-order kinetics. The thermodynamic parameters indicated that it was a spontaneous and exothermic process. Copyright © 2016 Elsevier Ltd. All rights reserved.

Putting a finger on the problem: Finger stick blood draw and immunization at the well-child exam elicit a cortisol response to stress among one-year-old children.

Science.gov (United States)

Kertes, Darlene A; Kamin, Hayley S; Liu, Jingwen; Bhatt, Samarth S; Kelly, Maria

2018-07-01

Research examining stress reactivity of the hypothalamic-pituitary-adrenocortical (HPA) axis in young children has historically been hampered by a lack of reliable methods to invoke a cortisol stress response. This report details an effective method of eliciting a cortisol rise in one-year-old children (N = 83) by modifying and combining two naturalistic stressors previously used with infants and children. Salivary cortisol levels were collected from children before and after a finger stick blood draw and immunizations performed during their one year well-child checkup at their pediatrician's office. Results indicated that the stressor was successful at eliciting a significant cortisol response. An extensive set of potential demographic and clinical confounds were also assessed in order to identify methodological considerations important in studies of infant cortisol. The stress paradigm presented here provides a promising alternative for studies of infant HPA activity to enable investigators to more effectively evaluate early functioning of the biological stress system during this developmentally important life stage. Copyright © 2018 Elsevier Ltd. All rights reserved.

Carrots that look like sticks: toward an understanding of multitasking incentive schemes

NARCIS (Netherlands)

Al-Ubaydli, O.; Andersen, S.; Gneezy, U.; List, J.A.

2015-01-01

Constructing compensation schemes for effort in multidimensional tasks is complex, particularly when some dimensions are not easily observable. When incentive schemes contractually reward workers for easily observed measures, such as quantity produced, the standard model predicts that unrewarded

CCT`s in a deregulated environment: A producer`s perspective

Energy Technology Data Exchange (ETDEWEB)

Edmonds, R.F. Jr.; Fayssoux, J.O. [Duke Power Co., Charlotte, NC (United States)

1997-12-31

The US electric industry will be deregulated (or substantially re-regulated) within 5 years. Several states, including California, Rhode Island, and New Hampshire, already have passed legislation to introduce competition into the electric markets before the year 2000. As this trend sweeps across the country, the resulting competitive market for generation will reward the lowest cost producers and force high cost producers out of the market. As a result, at least in the short run, it may be very difficult for new power plants employing Clean Coal Technologies (CCTs) to compete. This paper discusses a producer`s perspective of the new competitive market, and suggests several short and long term strategies and niches for CCTs.

Control of a nonlinear ice cream crystallization process

OpenAIRE

Casenave, Céline; Dochain, Denis; Alvarez, Graciela; Arellano, Marcela; Benkhelifa, Hayat; Leducq, Denis

2013-01-01

International audience; In the ice cream industry, the type of final desired product (large cartons (sqrounds) or ice creams on a stick) determine the viscosity at which the ice cream has to be produced. One of the objectives of the ice cream crystallization processes is therefore to produce an ice cream of specified viscosity. In this paper, a nonlinear control strategy is proposed for the control of the viscosity of the ice cream in a continuous crystallizer. It has been designed on the bas...

Pneumatic strength assessment device: design and isometric measurement.

Science.gov (United States)

Paulus, David C; Reiser, Raoul F; Troxell, Wade O

2004-01-01

In order to load a muscle optimally during resistance exercise, it should be heavily taxed throughout the entire range of motion for that exercise. However, traditional constant resistance squats only tax the lower-extremity muscles to their limits at the "sticking region" or a critical joint configuration of the exercise cycle. Therefore, a linear motion (Smith) exercise machine was modified with pneumatics and appropriate computer control so that it could be capable of adjusting force to control velocity within a repetition of the squat exercise or other exercise performed with the device. Prior to application of this device in a dynamic squat setting, the maximum voluntary isometric force (MVIF) produced over a spectrum of knee angles is needed. This would reveal the sticking region and overall variation in strength capacity. Five incremental knee angles (90, 110, 130, 150, and 170 degrees, where 180 degrees defined full extension) were examined. After obtaining university-approved informed consent, 12 men and 12 women participated in the study. The knee angle was set, and the pneumatic cylinder was pressurized such that the subject could move the barbell slightly but no more than two-centimeters. The peak pressure exerted over a five-second maximum effort interval was recorded at each knee angle in random order and then repeated. The average of both efforts was then utilized for further analysis. The sticking region occurred consistently at a 90 degrees knee angle, however, the maximum force produced varied between 110 degrees and 170 degrees with the greatest frequency at 150 degrees for both men and women. The percent difference between the maximum and minimum MVIF was 46% for men and 57% for women.

Biology, life history, and laboratory rearing of Spathius galinae (Hymenoptera: Braconidae), a larval parasitoid of the invasive emerald ash borer (Coleoptera: Buprestidae).

Science.gov (United States)

Duan, Jian J; Watt, Timothy J; Larson, Kristi

2014-06-01

Spathius galinae Belokobylskij & Strazanac is a recently described parasitoid of the emerald ash borer, Agrilus planipennis Fairmaire, in the Russian Far East, and is currently being considered for biocontrol introduction in the United States. Using A. planipennis larvae reared with freshly cut ash (Fraxinus spp.) sticks, we investigated the biology, life cycle, and rearing of S. galinae in the laboratory under normal rearing conditions (25 +/- 1 degrees C, 65 +/- 10% relative humidity, and a photoperiod of 16:8 [L:D] h). Our study showed that S. galinae took approximately 1 mo (29 d) to complete a single generation (from egg to adult) under the laboratory rearing conditions. After eclosion from eggs, larvae of S. galinae molted four times to reach the fifth instar, which then spun cocoons for pupation and development to adults. Adult female wasps had a median survival time of 7 wk with fecundity peaking 3 wk after emergence when reared in groups (of five females and five males) and 2 wk in single pairs. Throughout the life span, a single female S. galinae produced a mean (+/- SE) of 31 (+/- 3.0) progeny when reared in groups, and a mean (+/- SE) of 47 (+/- 5.3) progeny when reared in single pairs. Results from our study also showed that S. galinae could be effectively reared with A. planipennis larvae reared in both green (Fraxinus pennsylvanica Marshall) and tropical [Fraxinus uhdei (Wenzig) Lingelsh] ash sticks. However, the abortion (unemergence) rate of S. galinae progeny was much higher (20%) when reared with host larvae in green ash sticks than that (2.1%) in tropical ash sticks.

Dominance of IMP-4-Producing Enterobacter cloacae among Carbapenemase-Producing Enterobacteriaceae in Australia

Science.gov (United States)

Townell, Nicola; Nimmo, Graeme R.; George, Narelle M.; Robson, Jennifer; Vohra, Renu; Davis, Louise; Heney, Claire; Paterson, David L.

2015-01-01

The prevalence of carbapenemase-producing Enterobacteriaceae (CPE) has been increasing worldwide. blaIMP has been reported to be the predominant carbapenemase-encoding gene within Enterobacteriaceae in Australia. However, there are limited data currently available on CPE from Queensland, Australia. A total of 58 CPE isolates were isolated between July 2009 and March 2014 from Queensland hospitals. The clonality of isolates was determined by Diversilab repetitive sequence-based PCR. The isolates were investigated for the resistance mechanisms carbapenemase, extended-spectrum β-lactamase, and AmpC β-lactamase and for aminoglycoside resistance and plasmid-mediated quinolone resistance genes by PCR. The plasmid types associated with carbapenemase-encoding genes were characterized. The majority of the CPE were Enterobacter cloacae (n = 29). The majority of Queensland CPE isolates were IMP producers and comprised 11 species (n = 48). Nine NDM-producing Enterobacteriaceae were identified. One NDM-producing Klebsiella pneumoniae isolate coproduced OXA-48. One K. pneumoniae isolate was an OXA-181 producer. The incidence of IMP producers increased significantly in 2013. blaIMP-4 was found in all IMP-producing isolates. blaTEM, qnrB, and aacA4 were common among IMP-4 producers. The HI2 (67%) and L/M (21%) replicons were associated with blaIMP-4. All HI2 plasmids were of sequence type 1 (ST1). All but one of the NDM producers possessed blaCTX-M-15. The 16S rRNA methylase genes found among NDM producers were armA, rmtB, rmtC, and rmtF. The substantial increase in the prevalence of CPE in Queensland has been associated mainly with the emergence E. cloacae strains possessing HI2 plasmids carrying blaIMP-4 over the past 2 years. The importation of NDM producers and/or OXA-48-like producers in patients also contributed to the increased emergence of CPE. PMID:25918153

Does gene flow constrain adaptive divergence or vice versa? A test using ecomorphology and sexual isolation in Timema cristinae walking-sticks.

Science.gov (United States)

Nosil, P; Crespi, B J

2004-01-01

Population differentiation often reflects a balance between divergent natural selection and the opportunity for homogenizing gene flow to erode the effects of selection. However, during ecological speciation, trait divergence results in reproductive isolation and becomes a cause, rather than a consequence, of reductions in gene flow. To assess both the causes and the reproductive consequences of morphological differentiation, we examined morphological divergence and sexual isolation among 17 populations of Timema cristinae walking-sticks. Individuals from populations adapted to using Adenostoma as a host plant tended to exhibit smaller overall body size, wide heads, and short legs relative to individuals using Ceonothus as a host. However, there was also significant variation in morphology among populations within host-plant species. Mean trait values for each single population could be reliably predicted based upon host-plant used and the potential for homogenizing gene flow, inferred from the size of the neighboring population using the alternate host and mitochondrial DNA estimates of gene flow. Morphology did not influence the probability of copulation in between-population mating trials. Thus, morphological divergence is facilitated by reductions in gene flow, but does not cause reductions in gene flow via the evolution of sexual isolation. Combined with rearing data indicating that size and shape have a partial genetic basis, evidence for parallel origins of the host-associated forms, and inferences from functional morphology, these results indicate that morphological divergence in T. cristinae reflects a balance between the effects of host-specific natural selection and gene flow. Our findings illustrate how data on mating preferences can help determine the causal associations between trait divergence and levels of gene flow.

An advanced cold moderator using solid methane pellets

International Nuclear Information System (INIS)

Foster, C.A.; Carpenter, J.M.

2001-01-01

This paper reports developments of the pellet formation and transport technologies required for producing a liquid helium or hydrogen cooled methane pellet moderator. The Phase I US DOE SBIR project, already completed, demonstrated the production of 3 mm transparent pellets of frozen methane and ammonia and transport of the pellets into a 40 cc observation cell cooled with liquid helium. The methane pellets, formed at 72 K, stuck together during the loading of the cell. Ammonia pellets did not stick and fell readily under vibration into a packed bed with a 60% fill fraction. A 60% fill fraction should produce a very significant increase in long-wavelength neutron production and advantages in shorter pulse widths as compared to a liquid hydrogen moderator. The work also demonstrated a method of rapidly changing the pellets in the moderator cell. The Phase II project, just now underway, will develop a full-scale pellet source and transport system with a 1.5 L 'moderator' cell. The Phase II effort will also produce an apparatus to sub-cool the methane pellets to below 20 K, which should prevent the methane pellets from sticking together. In addition to results of the phase I experiments, the presentation includes a short video of the pellets, and a description of plans for the Phase II project. (author)

Producing charcoal from wastes

Energy Technology Data Exchange (ETDEWEB)

Pogorelov, V.A.

1983-01-01

Experimental works to use wood wastes for producing charcoal are examined, which are being conducted in the Sverdlovsk assembly and adjustment administration of Soyuzorglestekhmontazh. A wasteless prototype installation for producing fine charcoal is described, along with its subsequent briqueting, which is made on the basis of units which are series produced by the factories of the country. The installation includes subassemblies for preparing and drying the raw material and for producing the charcoal briquets. In the opinion of specialists, the charcoal produced from the wastes may be effectively used in ferrous and nonferrous metallurgy and in the production of pipes.

Physics of the mechanical toy Gee-Haw Whammy Diddle.

Science.gov (United States)

Marek, Martin; Badin, Matej; Plesch, Martin

2018-02-27

Gee-Haw Whammy Diddle is a seemingly simple mechanical toy consisting of a wooden stick and a second stick that is made up of a series of notches with a propeller at its end. When the wooden stick is pulled over the notches, the propeller starts to rotate. Despite its simplicity, physical principles governing the motion of the stick and the propeller are rather complicated and interesting. Here we provide a thorough analysis of the system and parameters influencing the motion. We show that contrary to the results published on this topic so far, neither elliptic motion of the stick nor frequency synchronization is needed for starting a stable motion of the propeller.

Consumers and Producers

NARCIS (Netherlands)

E. Maira (Elisa)

2018-01-01

markdownabstractIn the last few decades, advances in information and communication technology have dramatically changed the way consumers and producers interact in the marketplace. The Internet and social media have torn down the information barrier between producers and consumers, leading to

Biologically produced sulfur

NARCIS (Netherlands)

Kleinjan, W.E.; Keizer, de A.; Janssen, A.J.H.

2003-01-01

Sulfur compound oxidizing bacteria produce sulfur as an intermediate in the oxidation of hydrogen sulfide to sulfate. Sulfur produced by these microorganisms can be stored in sulfur globules, located either inside or outside the cell. Excreted sulfur globules are colloidal particles which are

Evaluation of different physical treatments in minimally processed green and red pepper (Capsicum annuum L.

Directory of Open Access Journals (Sweden)

L M Rodoni

2017-03-01

Full Text Available This work evaluates three different conservation methods for red and green fresh-cut peppers. Red and green fruit were processed into sticks and treated as follows: A water batch immersion (45 oC, 3 min (TT, B UV-C radiation (20 kJ m-2 or C modified atmosphere storage (AM. Other group of pepper sticks were left untreated (control. The sticks were stored at 5 oC during 12 d. Fruit decay, soft-rot and respiratory rate were evaluated during storage. The three treatments were effective to reduce sticks deterioration and the treated fruit evidenced lower respiratory rate at 7 d of storage with respect to control. While the three methods were beneficial to maintain quality, in the red sticks the best results were found with TT and UV, mainly because the AM had less control of the soft-rot at the end of storage. In green sticks all the treatments were equally effective.

Analysis of Handling Qualities Design Criteria for Active Inceptor Force-Feel Characteristics

Science.gov (United States)

Malpica, Carlos A.; Lusardi, Jeff A.

2013-01-01

ratio. While these two studies produced boundaries for acceptable/unacceptable stick dynamics for rotorcraft, they were not able to provide guidance on how variations of the stick dynamics in the acceptable region impact handling qualities. More recently, a ground based simulation study [5] suggested little benefit was to be obtained from variations of the damping ratio for a side-stick controller exhibiting high natural frequencies (greater than 17 rad/s) and damping ratios (greater than 2.0). A flight test campaign was conducted concurrently on the RASCAL JUH-60A in-flight simulator and the ACT/FHS EC-135 in flight simulator [6]. Upon detailed analysis of the pilot evaluations the study identified a clear preference for a high damping ratio and natural frequency of the center stick inceptors. Side stick controllers were found to be less sensitive to the damping. While these studies have compiled a substantial amount of data, in the form of qualitative and quantitative pilot opinion, a fundamental analysis of the effect of the inceptor force-feel system on flight control is found to be lacking. The study of Ref. [6] specifically concluded that a systematic analysis was necessary, since discrepancies with the assigned handling qualities showed that proposed analytical design metrics, or criteria, were not suitable. The overall goal of the present study is to develop a clearer fundamental understanding of the underlying mechanisms associated with the inceptor dynamics that govern the handling qualities using a manageable analytical methodology.

Producing metallurgic coke

Energy Technology Data Exchange (ETDEWEB)

Abe, T.; Isida, K.; Vada, Y.

1982-11-18

A mixture of power producing coals with coal briquets of varying composition is proposed for coking in horizontal chamber furnaces. The briquets are produced from petroleum coke, coal fines or semicoke, which make up less than 27 percent of the mixture to be briquetted and coals with a standard coking output of volatile substances and coals with high maximal Gizeler fluidity. The ratio of these coals in the mixture is 0.6 to 2.1 or 18 to 32 percent, respectively. Noncaking or poorly caking coals are used as the power producing coals. The hardness of the obtained coke is DJ15-30 = 90.5 to 92.7 percent.

Whole genome sequencing of Rhodotorula mucilaginosa isolated from the chewing stick (Distemonanthus benthamianus): insights into Rhodotorula phylogeny, mitogenome dynamics and carotenoid biosynthesis.

Science.gov (United States)

Gan, Han Ming; Thomas, Bolaji N; Cavanaugh, Nicole T; Morales, Grace H; Mayers, Ashley N; Savka, Michael A; Hudson, André O

2017-01-01

In industry, the yeast Rhodotorula mucilaginosa is commonly used for the production of carotenoids. The production of carotenoids is important because they are used as natural colorants in food and some carotenoids are precursors of retinol (vitamin A). However, the identification and molecular characterization of the carotenoid pathway/s in species belonging to the genus Rhodotorula is scarce due to the lack of genomic information thus potentially impeding effective metabolic engineering of these yeast strains for improved carotenoid production. In this study, we report the isolation, identification, characterization and the whole nuclear genome and mitogenome sequence of the endophyte R. mucilaginosa RIT389 isolated from Distemonanthus benthamianus, a plant known for its anti-fungal and antibacterial properties and commonly used as chewing sticks. The assembled genome of R. mucilaginosa RIT389 is 19 Mbp in length with an estimated genomic heterozygosity of 9.29%. Whole genome phylogeny supports the species designation of strain RIT389 within the genus in addition to supporting the monophyly of the currently sequenced Rhodotorula species. Further, we report for the first time, the recovery of the complete mitochondrial genome of R. mucilaginosa using the genome skimming approach. The assembled mitogenome is at least 7,000 bases larger than that of Rhodotorula taiwanensis which is largely attributed to the presence of large intronic regions containing open reading frames coding for homing endonuclease from the LAGLIDADG and GIY-YIG families. Furthermore, genomic regions containing the key genes for carotenoid production were identified in R. mucilaginosa RIT389, revealing differences in gene synteny that may play a role in the regulation of the biotechnologically important carotenoid synthesis pathways in yeasts.

Whole genome sequencing of Rhodotorula mucilaginosa isolated from the chewing stick (Distemonanthus benthamianus): insights into Rhodotorula phylogeny, mitogenome dynamics and carotenoid biosynthesis

Science.gov (United States)

Thomas, Bolaji N.; Cavanaugh, Nicole T.; Morales, Grace H.; Mayers, Ashley N.; Savka, Michael A.

2017-01-01

In industry, the yeast Rhodotorula mucilaginosa is commonly used for the production of carotenoids. The production of carotenoids is important because they are used as natural colorants in food and some carotenoids are precursors of retinol (vitamin A). However, the identification and molecular characterization of the carotenoid pathway/s in species belonging to the genus Rhodotorula is scarce due to the lack of genomic information thus potentially impeding effective metabolic engineering of these yeast strains for improved carotenoid production. In this study, we report the isolation, identification, characterization and the whole nuclear genome and mitogenome sequence of the endophyte R. mucilaginosa RIT389 isolated from Distemonanthus benthamianus, a plant known for its anti-fungal and antibacterial properties and commonly used as chewing sticks. The assembled genome of R. mucilaginosa RIT389 is 19 Mbp in length with an estimated genomic heterozygosity of 9.29%. Whole genome phylogeny supports the species designation of strain RIT389 within the genus in addition to supporting the monophyly of the currently sequenced Rhodotorula species. Further, we report for the first time, the recovery of the complete mitochondrial genome of R. mucilaginosa using the genome skimming approach. The assembled mitogenome is at least 7,000 bases larger than that of Rhodotorula taiwanensis which is largely attributed to the presence of large intronic regions containing open reading frames coding for homing endonuclease from the LAGLIDADG and GIY-YIG families. Furthermore, genomic regions containing the key genes for carotenoid production were identified in R. mucilaginosa RIT389, revealing differences in gene synteny that may play a role in the regulation of the biotechnologically important carotenoid synthesis pathways in yeasts. PMID:29158974

Analisis Pengaruh Strategi Bauran Pemasaran Terhadap Keputusan Konsumen Untuk Menggunakan Jasa Pos Di PT. Pos Indonesia (PERSERO) Cabang Pematangsiantar

OpenAIRE

Evadine, Rebecca

2011-01-01

The shipping service industries in Pematangsiantar do the same activities creating competition in getting their consumers. To maintain its existence, PT. Pos Indonesia (Limited Liability Company) Pematangsiantar Branch regards that the mix service marketing strategies are essential to be implemented in influencing consumer’s decision to use the postal service and stick with it. Consumer’s decision is influenced by the variables of mix marketing service strategies consisting of produc...

A COMPREHENSIVE STUDY OF HYDROGEN ADSORBING TO AMORPHOUS WATER ICE: DEFINING ADSORPTION IN CLASSICAL MOLECULAR DYNAMICS

Energy Technology Data Exchange (ETDEWEB)

Dupuy, John L.; Lewis, Steven P.; Stancil, P. C. [Department of Physics and Astronomy and the Center for Simulational Physics, University of Georgia, Athens, GA 30602 (United States)

2016-11-01

Gas–grain and gas–phase reactions dominate the formation of molecules in the interstellar medium (ISM). Gas–grain reactions require a substrate (e.g., a dust or ice grain) on which the reaction is able to occur. The formation of molecular hydrogen (H{sub 2}) in the ISM is the prototypical example of a gas–grain reaction. In these reactions, an atom of hydrogen will strike a surface, stick to it, and diffuse across it. When it encounters another adsorbed hydrogen atom, the two can react to form molecular hydrogen and then be ejected from the surface by the energy released in the reaction. We perform in-depth classical molecular dynamics simulations of hydrogen atoms interacting with an amorphous water-ice surface. This study focuses on the first step in the formation process; the sticking of the hydrogen atom to the substrate. We find that careful attention must be paid in dealing with the ambiguities in defining a sticking event. The technical definition of a sticking event will affect the computed sticking probabilities and coefficients. Here, using our new definition of a sticking event, we report sticking probabilities and sticking coefficients for nine different incident kinetic energies of hydrogen atoms [5–400 K] across seven different temperatures of dust grains [10–70 K]. We find that probabilities and coefficients vary both as a function of grain temperature and incident kinetic energy over the range of 0.99–0.22.

"They all work...when you stick to them": A qualitative investigation of dieting, weight loss, and physical exercise, in obese individuals

Directory of Open Access Journals (Sweden)

Kausman Rick

2008-11-01

Full Text Available Abstract Background To explore the extent to which people living with obesity have attempted to lose weight, their attitudes towards dieting, physical exercise and weight loss solutions, why their weight loss attempts have failed, and their opinions about what would be most beneficial to them in their struggle with their weight. Method Qualitative study, using open-ended interviews, of 76 people living with obesity in Victoria, Australia in 2006/7. Individuals with a BMI of 30 or over were recruited using articles in local newspapers, convenience sampling, and at a later stage purposive sampling techniques to diversify the sample. Data analysis was conducted by hand using a constant, comparative method to develop and test analytical categories. Data were interpreted both within team meetings and through providing research participants the chance to comment on the study findings. Results Whilst participants repeatedly turned to commercial diets in their weight loss attempts, few had used, or were motivated to participate in physical activity. Friends or family members had introduced most individuals to weight loss techniques. Those who took part in interventions with members of their social network were more likely to report feeling accepted and supported. Participants blamed themselves for being unable to maintain their weight loss or 'stick' to diets. Whilst diets did not result in sustained weight loss, two thirds of participants felt that dieting was an effective way to lose weight. Conclusion Individuals with obesity receive numerous instructions about what to do to address their weight, but very few are given appropriate long term guidance or support with which to follow through those instructions. Understanding the positive role of social networks may be particularly important in engaging individuals in physical activity. Public health approaches to obesity must engage and consult with those currently living with obesity, if patterns of

7 CFR 1206.16 - Producer.

Science.gov (United States)

2010-01-01

... producing, or causing to be produced, mangos beyond the person's own family use and having value at first... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.16 Producer. Producer means...

A Randomized Controlled Trial of Interventions to Impede Date Palm Sap Contamination by Bats to Prevent Nipah Virus Transmission in Bangladesh

Science.gov (United States)

Khan, Salah Uddin; Gurley, Emily S.; Hossain, M. Jahangir; Nahar, Nazmun; Sharker, M. A. Yushuf; Luby, Stephen P.

2012-01-01

Background Drinking raw date palm sap is a risk factor for human Nipah virus (NiV) infection. Fruit bats, the natural reservoir of NiV, commonly contaminate raw sap with saliva by licking date palm’s sap producing surface. We evaluated four types of physical barriers that may prevent bats from contacting sap. Methods During 2009, we used a crossover design and randomly selected 20 date palm sap producing trees and observed each tree for 2 nights: one night with a bamboo skirt intervention applied and one night without the intervention. During 2010, we selected 120 trees and randomly assigned four types of interventions to 15 trees each: bamboo, dhoincha (local plant), jute stick and polythene skirts covering the shaved part, sap stream, tap and collection pot. We enrolled the remaining 60 trees as controls. We used motion sensor activated infrared cameras to examine bat contact with sap. Results During 2009 bats contacted date palm sap in 85% of observation nights when no intervention was used compared with 35% of nights when the intervention was used [psap when the skirt did not entirely cover the sap producing surface. Therefore, in 2010 we requested the sap harvesters to use larger skirts. During 2010 bats contacted date palm sap [2% vs. 83%, psap in trees with bamboo (psap during one night (7%) with the jute stick skirt (psap producing areas of a tree effectively prevented bat-sap contact. Community interventions should promote applying these skirts to prevent occasional Nipah spillovers to human. PMID:22905160

Oral health practices among pregnant women in North Eastern Nigeria

African Journals Online (AJOL)

2011-08-27

Aug 27, 2011 ... Nigeria has not received the desired attention to the extent that even obstetricians hardly ... toothbrush and chewing stick and a few used charcoals. ... Variable. Number. Percentage. Nature of oral care. Toothbrush/paste. 264. 89.8. Chewing stick. 26. 8.8. Charcoal. 2. 0.7. Toothbrush+chewing stick. 2. 0.7.

Let's Not Stick Together: Anticipation of Cartel and Merger Control in The Netherlands

NARCIS (Netherlands)

Baarsma, B.; Kemp, R.G.M.; Noll, van der R.; Seldeslachts, J.

2012-01-01

Does enforcement action by the Netherlands Competition Authority (NMa) in the case of cartels and mergers produce an anticipatory effect? We use surveys among firms and their advisers to test whether merger plans that may fail to gain clearance from the NMa are not notified and whether the

Carrot and stick

DEFF Research Database (Denmark)

Hansen, Ernst Jan de Place

2013-01-01

information about the cost-benefit and the easy access to avoid taking out an insurance policy. Mandatory systems seem to be preferable, depending on the target group and the institutional settings. Since 2009, authorities no longer examine the project documentation when issuing building permissions...... or less voluntary benchmarking or insurance-based systems aimed at specific sub-sectors. Based on a literature review including web-pages the different systems and initiatives are presented. The different approaches and some of the fundamentals or institutional settings in which these systems operate...... are discussed. Insurance-based mandatory systems for social housing and urban renewal introduced around 1990 showed remarkable reduction in the volume of defects, but when more or less voluntary systems were introduced for single-family houses a similar success was not seen. This is explained by too little...

Making It Stick

Science.gov (United States)

Ewers, Justin

2009-01-01

It seems to happen every day. A meeting is called to outline a new strategy or sales plan. Down go the lights and up goes the PowerPoint. Strange phrases appear--"unlocking shareholder value," "technology-focused innovation," "maximizing utility." Lists of numbers come and go. Bullet point by bullet point, the…

Bioavailability of isoflavones from soy products in equol producers and non-producers in Japanese women

Directory of Open Access Journals (Sweden)

Ayako Miura

2016-12-01

Conclusions: The results in this study suggest that bioavailability of isoflavones are different between equol producers and non-producers, because the 24 h urinary excretion of equol in the equol producers were significantly lower than those in the equol non-producers.

Study on the vibrational scraping of uranium product from a solid cathode of electrorefiner

Energy Technology Data Exchange (ETDEWEB)

Park, Sung Bin; Kang, Young Ho; Hwang, Sung Chan; Lee, Han Soo; Paek, Seung Woo; Ahn, Do Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-12-15

A high-throughput electrorefiner has been developed for commercialization use by enhancing the uranium recovery from the reduced metal which is produced from the oxide reduction process. It is necessary to scrap and effectively collect uranium dendrites from the surface of the solid cathode for high yield. When a steel electrode is used as the cathode in the electrorefining process, uranium is deposited and regularly stuck to the steel cathode during electrorefining. The sticking coefficient of a steel cathode is very high. In order to decrease the sticking coefficient of the steel cathode effectively, vibration mode was applied to the electrode in this study. Uranium dendrites were scraped and fell apart from the steel cathode by a vibration force. The vibrational scraping of the steel cathode was compared to the self-scraping of the graphite cathode. Effects of the applied current density and the vibration stroke on the scraping of the uranium dendrites were also investigated.

Optimization of resistance spot welding on the assembly of refractory alloy 50Mo-50Re thin sheet

Energy Technology Data Exchange (ETDEWEB)

Xu, Jianhui [Department of Chemical and Materials Engineering, University of Kentucky, 177 Anderson Hall, Lexington, KY 40506 (United States); Jiang, Xiuping [Department of Chemical and Materials Engineering, University of Kentucky, 177 Anderson Hall, Lexington, KY 40506 (United States); Zeng, Qiang [Department of Chemical and Materials Engineering, University of Kentucky, 177 Anderson Hall, Lexington, KY 40506 (United States); Zhai, Tongguang [Department of Chemical and Materials Engineering, University of Kentucky, 177 Anderson Hall, Lexington, KY 40506 (United States)]. E-mail: tzhai0@engr.uky.edu; Leonhardt, Todd [Rhenium Alloys Inc., Elyria, OH 44036 (United States); Farrell, John [Semicon Associates, 695 Laco Drive, Lexington, KY 40510 (United States); Umstead, Williams [Semicon Associates, 695 Laco Drive, Lexington, KY 40510 (United States); Effgen, Michael P. [Semicon Associates, 695 Laco Drive, Lexington, KY 40510 (United States)

2007-07-01

Resistance spot welding (RSW) was employed to pre-join refractory alloy 50Mo-50Re (wt%) sheet with a 0.127 mm gage. Five important welding parameters (hold time, electrode, ramp time, weld current and electrode force) were adjusted in an attempt to optimize the welding quality. It was found that increasing the hold time from 50 ms to 999 ms improved the weld strength. Use of rod-shaped electrodes produced symmetric nugget and enhanced the weld strength. Use of a ramp time of 8 ms minimized electrode sticking and molten metal expulsion. The weld strength continuously increased with increasing the weld current up to 1100 A, but the probabilities of occurrence of electrode sticking and molten metal expulsion were also increased. Electrode force was increased from 4.44 N to 17.8 N, in order to reduce the inconsistency of the welding quality. Welding defects including porosities, columnar grains and composition segregation were also studied.

Effectiveness of hydrogen rich water on antioxidant status of subjects with potential metabolic syndrome-an open label pilot study.

Science.gov (United States)

Nakao, Atsunori; Toyoda, Yoshiya; Sharma, Prachi; Evans, Malkanthi; Guthrie, Najla

2010-03-01

Metabolic syndrome is characterized by cardiometabolic risk factors that include obesity, insulin resistance, hypertension and dyslipidemia. Oxidative stress is known to play a major role in the pathogenesis of metabolic syndrome. The objective of this study was to examine the effectiveness of hydrogen rich water (1.5-2 L/day) in an open label, 8-week study on 20 subjects with potential metabolic syndrome. Hydrogen rich water was produced, by placing a metallic magnesium stick into drinking water (hydrogen concentration; 0.55-0.65 mM), by the following chemical reaction; Mg + 2H(2)O --> Mg (OH)(2) + H(2). The consumption of hydrogen rich water for 8 weeks resulted in a 39% increase (pfasting glucose levels during the 8 week study. In conclusion, drinking hydrogen rich water represents a potentially novel therapeutic and preventive strategy for metabolic syndrome. The portable magnesium stick was a safe, easy and effective method of delivering hydrogen rich water for daily consumption by participants in the study.

Low-Profile, Dual-Wavelength, Dual-Polarized Antenna

Science.gov (United States)

Carswell, James R.

2010-01-01

A single-aperture, low-profile antenna design has been developed that supports dual-polarization and simultaneous operation at two wavelengths. It realizes multiple beams in the elevation plane, and supports radiometric, radar, and conical scanning applications. This antenna consists of multiple azimuth sticks, with each stick being a multilayer, hybrid design. Each stick forms the h-plane pattern of the C and Ku-band vertically and horizontally polarized antenna beams. By combining several azimuth sticks together, the elevation beam is formed. With a separate transceiver for each stick, the transmit phase and amplitude of each stick can be controlled to synthesize a beam at a specific incidence angle and to realize a particular side-lobe pattern. By changing the transmit phase distribution through the transceivers, the transmit antenna beam can be steered to different incidence angles. By controlling the amplitude distribution, different side lobe patterns and efficiencies can be realized. The receive beams are formed using digital beam synthesis techniques, resulting in very little loss in the receive path, thus enabling a very-low loss receive antenna to support passive measurements.

Optimization of ISOL targets based on Monte-Carlo simulations of ion release curves

International Nuclear Information System (INIS)

Mustapha, B.; Nolen, J.A.

2003-01-01

A detailed model for simulating release curves from ISOL targets has been developed. The full 3D geometry is implemented using Geant-4. Produced particles are followed individually from production to release. The delay time is computed event by event. All processes involved: diffusion, effusion and decay are included to obtain the overall release curve. By fitting to the experimental data, important parameters of the release process (diffusion coefficient, sticking time, ...) are extracted. They can be used to improve the efficiency of existing targets and design new ones more suitable to produce beams of rare isotopes

Optimization of ISOL targets based on Monte-Carlo simulations of ion release curves

CERN Document Server

Mustapha, B

2003-01-01

A detailed model for simulating release curves from ISOL targets has been developed. The full 3D geometry is implemented using Geant-4. Produced particles are followed individually from production to release. The delay time is computed event by event. All processes involved: diffusion, effusion and decay are included to obtain the overall release curve. By fitting to the experimental data, important parameters of the release process (diffusion coefficient, sticking time, ...) are extracted. They can be used to improve the efficiency of existing targets and design new ones more suitable to produce beams of rare isotopes.

Brookhaven Linac Isotope Producer

Data.gov (United States)

Federal Laboratory Consortium — The Brookhaven Linac Isoptope Producer (BLIP)—positioned at the forefront of research into radioisotopes used in cancer treatment and diagnosis—produces commercially...

Effects of skin-to-skin contact on autonomic pain responses in preterm infants.

Science.gov (United States)

Cong, Xiaomei; Cusson, Regina M; Walsh, Stephen; Hussain, Naveed; Ludington-Hoe, Susan M; Zhang, Di

2012-07-01

The purpose of this randomized crossover trial was to determine the effects on autonomic responses in preterm infants of longer Kangaroo Care (30 minutes, KC30) and shorter KC (15 minutes, KC15) before and throughout heel stick compared with incubator care (IC). Beat-to-beat heart rate (HR) and spectral power analysis of heart rate variability, low frequency power (LF), high frequency power (HF), and LF/HF ratio were measured in 26 infants. HR changes from Baseline to Heel Stick were significantly less in KC30 and KC15 than in IC, and more infants had HR decrease in IC than in 2 KC conditions. In IC, LF and HF significantly increased from Baseline to Heel Stick and dropped from Heel Stick to Recovery; in 2 KC conditions, no changes across study phases were found. During Heel Stick, LF and HF were significantly higher in IC than in KC30. In all 3 conditions, LF/HF ratio decreased from Baseline to Heel Stick and increased to Recovery; no differences were found between IC and two KC conditions. Both longer and shorter KC before and throughout heel stick can stabilize HR response in preterm infants, and longer KC significantly affected infants' sympathetic and parasympathetic responses during heel stick compared with incubator care. This study showed that KC has a significant effect on reducing autonomic pain responses in preterm infants. The findings support that KC is a safe and effective pain intervention in the neonatal intensive care unit. Copyright © 2012 American Pain Society. Published by Elsevier Inc. All rights reserved.

Spectra of electrons emitted as a result of the sticking and annihilation of low energy positrons to the surfaces of graphene and highly oriented pyrolytic graphite (HOPG)

Science.gov (United States)

Chrysler, M.; Chirayath, V.; McDonald, A.; Lim, Z.; Shastry, K.; Gladen, R.; Fairchild, A.; Koymen, A.; Weiss, A.

Positron annihilation induced Auger electron spectroscopy (PAES) was used to study the positron induced low energy electron spectra from HOPG and a sample composed of 6-8 layers of graphene grown on polycrystalline copper. A low energy (~2eV) beam of positrons was used to implant positrons into a surface localized state on the graphene and HOPG samples. Measurements of the energy spectra of the positron induced electrons obtained using a TOF spectrometer indicate the presence of an annihilation induced KLL C Auger peak (at ~263 eV) along with a narrow low energy secondary peak due to an Auger mediated positron sticking (AMPS) process. A broad spectral feature was also observed below ~15 eV which we believe may be due to a VVV C Auger transition not previously observed. The energy dependence of the integrated intensity of the AMPS peak was measured for a series of incident positron kinetic energies ranging from ~1.5 eV up to 11 eV from which the binding energy of the surface localized positron state on graphene and HOPG was estimated. The implication of our results regarding the applicability of AMPS and PAES to the study of graphene surfaces and interfaces will be discussed. This work was supported by NSF Grant No. DMR 1508719 and DMR 1338130.

Microstructure and Textural Properties of Yoghurts Produced by Exopolysaccharides- Producing Starter Cultures

DEFF Research Database (Denmark)

Zhang, Lanjun

conferred a ropy texture and resulted in yoghurts with decreased water holding capacity and an open microstructure. In addition, one of the LB strains with high amounts of EPS producing capacity improved water retention, when it was combined with an ST strain that produced negligible amounts of EPS...

Producers give prices a boost

International Nuclear Information System (INIS)

Anon.

1992-01-01

Uranium producers came alive in August, helping spot prices crack the $8.00 barrier for the first time since March. The upper end of NUKEM's price range actually finished the month at $8.20. Scrambling to fulfill their long-term delivery contracts, producers dominate the market. In the span of three weeks, five producers came out for 2 million lbs U3O8, ultimately buying nearly 1.5 million lbs. One producer accounted for over half this volume. The major factor behind rising prices was that producers required specific origins to meet contract obligations. Buyers willing to accept open origins created the lower end of NUKEM's price range

Producing the Spielberg Brand

OpenAIRE

Russell, J.

2016-01-01

This chapter looks at the manufacture of Spielberg’s brand, and the limits of its usage. Spielberg’s directorial work is well known, but Spielberg’s identity has also been established in other ways, and I focus particularly on his work as a producer. At the time of writing, Spielberg had produced (or executive produced) 148 movies and television series across a range of genres that takes in high budget blockbusters and low budget documentaries, with many more to come. In these texts, Spielber...

Polysaccharide-producing microalgae

Energy Technology Data Exchange (ETDEWEB)

Braud, J.P.; Chaumont, D.; Gudin, C.; Thepenier, C.; Chassin, P.; Lemaire, C.

1982-11-01

The production of extracellular polysaccharides is studied with Nostoc sp (cyanophycus), Porphiridium cruentum, Rhodosorus marinus, Rhodella maculata (rhodophyci) and Chlamydomonas mexicana (chlorophycus). The polysaccharides produced are separated by centrifugation of the culture then precipitation with alcohol. Their chemical structure was studied by infrared spectrometry and acid hydrolysis. By their rheological properties and especially their insensitivity to temperatrure and pH variations the polysaccharides produced by Porphryridium cruentum and Rhodella maculata appear as suitable candidates for industrial applications.

Adaptive evolution of drug targets in producer and non-producer organisms

DEFF Research Database (Denmark)

Hansen, Bjarne Gram; Sun, Xin E.; Genee, Hans Jasper

2012-01-01

MPA (mycophenolic acid) is an immunosuppressive drug produced by several fungi in Penicillium subgenus Penicillium. This toxic metabolite is an inhibitor of IMPDH (IMP dehydrogenase). The MPA-biosynthetic cluster of Penicillum brevicompactum contains a gene encoding a B-type IMPDH, IMPDH-B, which...... confers MPA resistance. Surprisingly, all members of the subgenus Penicillium contain genes encoding IMPDHs of both the A and B types, regardless of their ability to produce MPA. Duplication of the IMPDH gene occurred before and independently of the acquisition of the MPAbiosynthetic cluster. Both P....... brevicompactum IMPDHs are MPA-resistant, whereas the IMPDHs from a non-producer are MPA-sensitive. Resistance comes with a catalytic cost: whereas P. brevicompactum IMPDH-B is >1000-fold more resistant to MPA than a typical eukaryotic IMPDH, its value of kcat/Km is 0.5%of ‘normal’. Curiously, IMPDH...

Link lengths and their growth powers

International Nuclear Information System (INIS)

Huh, Youngsik; No, Sungjong; Oh, Seungsang; Rawdon, Eric J

2015-01-01

For a certain infinite family F of knots or links, we study the growth power ratios of their stick number, lattice stick number, minimum lattice length and minimum ropelength compared with their minimum crossing number c(K) for every K∈F. It is known that the stick number and lattice stick number grow between the (1/2) and linear power of the crossing number, and minimum lattice length and minimum ropelength grow with at least the (3/4) power of crossing number (which is called the four-thirds power law). Furthermore, the minimal lattice length and minimum ropelength grow at most as O (c(K)[ln(c(K))] 5 ), but it is unknown whether any family exhibits superlinear growth. For any real number r between (1/2) and 1, we give an infinite family of non-splittable prime links in which the stick number and lattice stick number grow exactly as the rth power of crossing number. Furthermore for any real number r between (3/4) and 1, we give another infinite family of non-splittable prime links in which the minimum lattice length and minimum ropelength grow exactly as the rth power of crossing number. (paper)

Fidelity of Simulation for Pilot Training

Science.gov (United States)

1980-12-01

indicators of joint angles. The combination of all the pro- prioceptive senses permits subjects to perceive body accelerations based on the biomechanical ...constraints III. Controllers A. Flight controls 1. Center stick, column, side stick, collective 2. Pedals (yaw control, brakes) 3. Thrust controllers 4...the most sensitive elements in terms of fidelity require- ments. The force-generating systems associated with the stick or column and pedals are

Producers and oil markets

International Nuclear Information System (INIS)

Greaves, W.

1993-01-01

This article attempts an assessment of the potential use of futures by the Middle East oil producers. It focuses on Saudi Arabia since the sheer size of Saudi Arabian sales poses problems, but the basic issues discussed are similar for the other Middle East producers. (Author)

[Distiller Yeasts Producing Antibacterial Peptides].

Science.gov (United States)

Klyachko, E V; Morozkina, E V; Zaitchik, B Ts; Benevolensky, S V

2015-01-01

A new method of controlling lactic acid bacteria contamination was developed with the use of recombinant Saccharomyces cerevisiae strains producing antibacterial peptides. Genes encoding the antibacterial peptides pediocin and plantaricin with codons preferable for S. cerevisiae were synthesized, and a system was constructed for their secretory expression. Recombinant S. cerevisiae strains producing antibacterial peptides effectively inhibit the growth of Lactobacillus sakei, Pediacoccus pentasaceus, Pediacoccus acidilactici, etc. The application of distiller yeasts producing antibacterial peptides enhances the ethanol yield in cases of bacterial contamination. Recombinant yeasts producing the antibacterial peptides pediocin and plantaricin can successfully substitute the available industrial yeast strains upon ethanol production.

OR TEP-II: a FORTRAN Thermal-Ellipsoid Plot Program for crystal structure illustrations

International Nuclear Information System (INIS)

Johnson, C.K.

1976-03-01

A computer program is described for drawing crystal structure illustrations using a mechanical plotter. Ball-and-stick type illustrations of a quality suitable for publication are produced with either spheres or thermal-motion probability ellipsoids on the atomic sites. The program can produce stereoscopic pairs of illustrations which aid in the visualization of complex packing arrangements of atoms and thermal motion patterns. Interatomic distances, bond angles, and principal axes of thermal motion are also calculated to aid the structural study. The most recent version of the program, OR TEP-II, has a hidden-line-elimination feature to omit those portions of atoms or bonds behind other atoms or bonds

OR TEP-II: a FORTRAN Thermal-Ellipsoid Plot Program for crystal structure illustrations

Energy Technology Data Exchange (ETDEWEB)

Johnson, C.K.

1976-03-01

A computer program is described for drawing crystal structure illustrations using a mechanical plotter. Ball-and-stick type illustrations of a quality suitable for publication are produced with either spheres or thermal-motion probability ellipsoids on the atomic sites. The program can produce stereoscopic pairs of illustrations which aid in the visualization of complex packing arrangements of atoms and thermal motion patterns. Interatomic distances, bond angles, and principal axes of thermal motion are also calculated to aid the structural study. The most recent version of the program, OR TEP-II, has a hidden-line-elimination feature to omit those portions of atoms or bonds behind other atoms or bonds.

Human body may produce bacteria.

Science.gov (United States)

Salerian, Alen J

2017-06-01

"Human body may produce bacteria" proposes that human body may produce bacteria and represent an independent source of infections contrary to the current paradigm of infectious disorders proposed by Louis Pasteur in 1880. The following observations are consistent with this hypothesis: A. Bidirectional transformations of both living and nonliving things have been commonly observed in nature. B. Complex multicellular organisms harbor the necessary properties to produce bacteria (water, nitrogen and oxygen). C. Physical laws suggest any previously observed phenomenon or action will occur again (life began on earth; a non living thing). D. Animal muscle cells may generate energy (fermentation). E. Sterilized food products (i.e. boiled eggs), may produce bacteria and fungus under special conditions and without any exposure to foreign living cells. "Human body may produce bacteria" may challenge the current medical paradigm that views human infectious disorders as the exclusive causative byproducts of invading foreign cells. It may also introduce new avenues to treat infectious disorders. Copyright © 2017 Elsevier Ltd. All rights reserved.

A comparison of muscle activity in concentric and counter movement maximum bench press.

Science.gov (United States)

van den Tillaar, Roland; Ettema, Gertjan

2013-01-01

The purpose of this study was to compare the kinematics and muscle activation patterns of regular free-weight bench press (counter movement) with pure concentric lifts in the ascending phase of a successful one repetition maximum (1-RM) attempt in the bench press. Our aim was to evaluate if diminishing potentiation could be the cause of the sticking region. Since diminishing potentiation cannot occur in pure concentric lifts, the occurrence of a sticking region in this type of muscle actions would support the hypothesis that the sticking region is due to a poor mechanical position. Eleven male participants (age 21.9 ± 1.7 yrs, body mass 80.7 ± 10.9 kg, body height 1.79 ± 0.07 m) conducted 1-RM lifts in counter movement and in pure concentric bench presses in which kinematics and EMG activity were measured. In both conditions, a sticking region occurred. However, the start of the sticking region was different between the two bench presses. In addition, in four of six muscles, the muscle activity was higher in the counter movement bench press compared to the concentric one. Considering the findings of the muscle activity of six muscles during the maximal lifts it was concluded that the diminishing effect of force potentiation, which occurs in the counter movement bench press, in combination with a delayed muscle activation unlikely explains the existence of the sticking region in a 1-RM bench press. Most likely, the sticking region is the result of a poor mechanical force position.

Dynamics of dissociative adsorption of hydrogen on Ni(100)

International Nuclear Information System (INIS)

Hamza, A.V.; Madix, R.J.

1985-01-01

Nearly monoenergetic beams of hydrogen and deuterium were used to determine dissociative sticking probabilities for H 2 and D 2 on Ni(100) at various energies. Variation of the surface temperature between 90 and 300 K had no effect on the dissociative sticking probability of H 2 at 3.6 and 5.8 kJ/mol incident beam energy, indicating a direct mechanism of dissociation. A four fold increase in the initial dissociative sticking probability for H 2 from 0.2 to 0.8 was observed by increasing the translational kinetic energy from 0.7 to 7.0 kJ/mol. The initial dissociative sticking probability for D 2 was slightly lower, increasing from 0.15 to 0.75 with increasing translational kinetic energy from 1.3 to 10.5 kJ/mol. The form of the increase with kinetic energy was explained by tunnelling through a low activation barrier, accounting as well for the high dissociation probability at low kinetic energies. The dissociative sticking probability decreased with hydrogen or deuterium adatom coverage at all energies. The decline in sticking probability with hydrogen coverage was fit to a s(theta) = s 0 (1 - a theta)/sup n/ functional form. From this relationship it was deduced that hydrogen adatoms block only single sites and that four vacant sites are needed for dissociation. The dissociative sticking probability for H 2 declined precipitously from 0.77 to 0.16 with oxygen adatom coverage from 0 to 5% of a monolayer at a translational energy of 9.6 kJ.mol. 36 references, 8 figures

Methods of producing transportation fuel

Science.gov (United States)

Nair, Vijay [Katy, TX; Roes, Augustinus Wilhelmus Maria [Houston, TX; Cherrillo, Ralph Anthony [Houston, TX; Bauldreay, Joanna M [Chester, GB

2011-12-27

Systems, methods, and heaters for treating a subsurface formation are described herein. At least one method for producing transportation fuel is described herein. The method for producing transportation fuel may include providing formation fluid having a boiling range distribution between -5.degree. C. and 350.degree. C. from a subsurface in situ heat treatment process to a subsurface treatment facility. A liquid stream may be separated from the formation fluid. The separated liquid stream may be hydrotreated and then distilled to produce a distilled stream having a boiling range distribution between 150.degree. C. and 350.degree. C. The distilled liquid stream may be combined with one or more additives to produce transportation fuel.

Relay cropping of wheat (Triticum aestivum L.) in cotton (Gossypium hirsutum L.) improves the profitability of cotton-wheat cropping system in Punjab, Pakistan.

Science.gov (United States)

Sajjad, Aamer; Anjum, Shakeel Ahmad; Ahmad, Riaz; Waraich, Ejaz Ahmad

2018-01-01

Delayed sowing of wheat (Triticum aestivum L.) in cotton-based system reduces the productivity and profitability of the cotton-wheat cropping system. In this scenario, relay cropping of wheat in standing cotton might be a viable option to ensure the timely wheat sowing with simultaneous improvement in wheat yields and system profitability. This 2-year study (2012-2013 and 2013-2014) aimed to evaluate the influence of sowing dates and relay cropping combined with different management techniques of cotton sticks on the wheat yield, soil physical properties, and the profitability of the cotton-wheat system. The experiment consisted of five treatments viz. (S1) sowing of wheat at the 7th of November by conventional tillage (two disc harrows + one rotavator + two plankings) after the removal of cotton sticks, (S2) sowing of wheat at the 7th of November by conventional tillage (two disc harrows + two plankings) after the incorporation of cotton sticks in the field with a rotavator, (S3) sowing of wheat at the 7th of November as relay crop in standing cotton with broadcast method, (S4) sowing of wheat at the 15th of December by conventional tillage (two disc harrows + one rotavator + two plankings) after the removal of cotton sticks, and (S5) sowing of wheat at the 15th of December by conventional tillage (two disc harrows + two plankings) after the incorporation of cotton sticks in the field with a rotavator. The highest seed cotton yield was observed in the S5 treatment which was statistically similar with the S3 and S4 treatments; seed cotton yield in the S1 and S2 treatments has been the lowest in both years of experimentation. However, the S2 treatment produced substantially higher root length, biological yield, and grain yield of wheat than the other treatments. The lower soil bulk density at 0-10-cm depth was recorded in the S2 treatment which was statistically similar with the S5 treatment during both years of experimentation. The volumetric water contents, net

Contact conditions in skin-pass rolling

DEFF Research Database (Denmark)

Kijima, Hideo; Bay, Niels

2007-01-01

The special contact conditions in skin-pass rolling of steel strip is analysed by studying plane strain upsetting of thin sheet with low reduction applying long narrow tools and dry friction conditions. An extended sticking region is estimated by an elasto-plastic FEM analysis of the plane strain...... upsetting. This sticking region causes a highly inhomogeneous elasto-plastic deformation with large influence of work-hardening and friction. A numerical analysis of skin-pass rolling shows the same contact conditions, i.e. an extended sticking region around the center of the contact zone. The calculated...... size of the sticking region with varying contact length and pressure/reduction is experimentally verified by plane strain upsetting tests measuring the local surface deformation of the work pieces after unloading....

Course/workshop on muon catalyzed fusion and fusion with polarized nuclei

International Nuclear Information System (INIS)

Kulsrud, R.M.

1987-08-01

There seems to be some real connection between the spin states of the d-t nuclei in the muon mesomolecule dtμ and the resultant sticking probability. This paper discusses this connection. No new experimental results on spin polarization are reported, but illuminating ideas emerged as to the role spin polarized plasmas could play in inertial confinement fusion and magnetic fusion. In addition, realistic evaluations were made as to the possibility of producing and preserving spin polarized plasmas. 4 refs

Trusted Remote Operation of Proximate Emergy Robots (TROOPER): DARPA Robotics Challenge

Science.gov (United States)

2015-12-01

method for activating the drill is to press the button by visual servoing in with the POKEY stick, described below. 3.3.5.4 Button Tracking and Stick...involving visual servoing much easier to accomplish. Figure 7. POKEY Stick Since the camera is mounted at a more maneuverable position (i.e., end...In the wall task, the cutting tool can be activated using a visual servoing approach to find the button with the hand camera then steadily move

Trusted Remote Operation of Proximate Emergency Robots (TROOPER): DARPA Robotics Challenge

Science.gov (United States)

2015-12-01

method for activating the drill is to press the button by visual servoing in with the POKEY stick, described below. 3.3.5.4 Button Tracking and Stick...involving visual servoing much easier to accomplish. Figure 7. POKEY Stick Since the camera is mounted at a more maneuverable position (i.e., end...In the wall task, the cutting tool can be activated using a visual servoing approach to find the button with the hand camera then steadily move

Price satisfaction and producer loyalty

DEFF Research Database (Denmark)

Mutonyi, Sarah; Beukel, Karin; Gyau, Amos

2016-01-01

Purpose The purpose of this paper is to investigate which dimensions of price satisfaction influence producers’ trust in buyers and assess the mediating role of such trust in the relationship between price satisfaction and producer loyalty in fresh fruit supply chains. Design/methodology/approach......Purpose The purpose of this paper is to investigate which dimensions of price satisfaction influence producers’ trust in buyers and assess the mediating role of such trust in the relationship between price satisfaction and producer loyalty in fresh fruit supply chains. Design...... reliability, and relative price are dimensions of price satisfaction that affect producers’ trust in the buyer. Moreover, trust between the producer and the buyer is found to be a strong mediator between price satisfaction and producer loyalty. The findings support recent studies about trust and its mediating...... between the multi-dimensional nature of price satisfaction and producer loyalty with trust as a mediating variable in the business-to-business (B2B) context. Although B2B relationships have been shown to be of great importance for smallholders in enhancing business performance with their buyers, little...

Bacteriocin producers from traditional food products

Directory of Open Access Journals (Sweden)

Thonart P.

2007-01-01

Full Text Available A total of 220 strains of LAB isolated from 32 samples of traditional fermented food from Senegal were screened for bacteriocin production. Two bacteriocin producers, Lactococcus lactis subsp. lactis and Enterococcus faecium, were identified from 12 bacteriocin-producing isolates on the basis of phenotypic analyses and 16S rDNA sequence. Both bacteriocins produced by new isolates show antimicrobial activity against Listeria monocytogenes and Bacillus coagulans whereas only that produced by Lactococcus lactis has an activity against Bacillus cereus. Bacteriocin-producing Lactococcus lactis strains were found in a variety of traditional foods indicating a high potential of growth of this strain in variable ecological complex environment. Partial 16S rDNA of the two bacteriocin producers obtained in this study has been registered to Genbank databases under the accession number AY971748 for Lactococcus lactis subsp. lactis (named CWBI-B1410 and AY971749 for Enterococcus faecium (named CWBI-B1411. The new bacteriocin-producing Lactococcus lactis subsp. lactis strain has been selected for identification and application of the bacteriocin to food preservation.

Methods for producing diterpenes

DEFF Research Database (Denmark)

2015-01-01

The present invention discloses that by combining different di TPS enzymes of class I and class II different diterpenes may be produced including diterpenes not identified in nature. Surprisingly it is revealed that a di TPS enzyme of class I of one species may be combined with a di TPS enzyme...... of class II from a different species, resulting in a high diversity of diterpenes, which can be produced....

Process for producing ethanol from syngas

Science.gov (United States)

Krause, Theodore R; Rathke, Jerome W; Chen, Michael J

2013-05-14

The invention provides a method for producing ethanol, the method comprising establishing an atmosphere containing methanol forming catalyst and ethanol forming catalyst; injecting syngas into the atmosphere at a temperature and for a time sufficient to produce methanol; and contacting the produced methanol with additional syngas at a temperature and for a time sufficient to produce ethanol. The invention also provides an integrated system for producing methanol and ethanol from syngas, the system comprising an atmosphere isolated from the ambient environment; a first catalyst to produce methanol from syngas wherein the first catalyst resides in the atmosphere; a second catalyst to product ethanol from methanol and syngas, wherein the second catalyst resides in the atmosphere; a conduit for introducing syngas to the atmosphere; and a device for removing ethanol from the atmosphere. The exothermicity of the method and system obviates the need for input of additional heat from outside the atmosphere.

7 CFR 1212.19 - Producer.

Science.gov (United States)

2010-01-01

... producing, or causing to be produced, honey beyond personal use and having value at first point of sale. ... person who is engaged in the production and sale of honey in any State and who owns, or shares the...

Consumer's Fresh Produce Food Safety Practices: Outcomes of a Fresh Produce Safety Education Program

Science.gov (United States)

Scott, Amanda R.; Pope, Paul E.; Thompson, Britta M.

2009-01-01

The Centers for Disease Control and Prevention estimate that there are 76 million cases of foodborne disease annually. Foodborne disease is usually associated with beef, poultry, and seafood. However, there is an increasing number of foodborne disease cases related to fresh produce. Consumers may not associate fresh produce with foodborne disease…

Rasch analysis of the 23-item version of the Roland Morris Disability Questionnaire

DEFF Research Database (Denmark)

Kent, Peter; Grotle, Margreth; Dunn, Kate

2015-01-01

participants (35 villagers and 13 healthcare providers). Analysis included constant comparative methods followed by a structured approach to identify and assemble walking stick text for interpretation. Results: Observations and discussions revealed that many walking sticks were handcrafted from natural...... or household objects. From a therapeutic perspective, homemade and commercial aids were improperly fitted and poorly maintained. Villagers reported walking stick use to: uphold posture and balance; relieve MuBoJo pain; honour fashionable tradition; and assist visually impaired persons to negotiate rough...

Cellulase producing microorganism ATCC 55702

Science.gov (United States)

Dees, H. Craig

1997-01-01

Bacteria which produce large amounts of cellulase--containing cell-free fermentate have been identified. The original bacterium (ATCC 55703) was genetically altered using nitrosoguanidine (MNNG) treatment to produce the enhanced cellulase producing bacterium (ATCC 55702), which was identified through replicate plating. ATCC 55702 has improved characteristics and qualifies for the degradation of cellulosic waste materials for fuel production, food processing, textile processing, and other industrial applications. ATCC 55702 is an improved bacterial host for genetic manipulations using recombinant DNA techniques, and is less likely to destroy genetic manipulations using standard mutagenesis techniques.

Methods of producing cesium-131

Science.gov (United States)

Meikrantz, David H; Snyder, John R

2012-09-18

Methods of producing cesium-131. The method comprises dissolving at least one non-irradiated barium source in water or a nitric acid solution to produce a barium target solution. The barium target solution is irradiated with neutron radiation to produce cesium-131, which is removed from the barium target solution. The cesium-131 is complexed with a calixarene compound to separate the cesium-131 from the barium target solution. A liquid:liquid extraction device or extraction column is used to separate the cesium-131 from the barium target solution.

Agricultural Producer Certificates

Data.gov (United States)

Montgomery County of Maryland — A Certified Agricultural Producer, or representative thereof, is an individual who wishes to sell regionally-grown products in the public right-of-way. A Certified...

29 CFR 780.213 - Produce business.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Produce business. 780.213 Section 780.213 Labor Regulations... Specific Situations Hatchery Operations § 780.213 Produce business. In some instances, hatcheries also engage in the produce business as such and commingle with the culled eggs and chickens other eggs and...

A method of producing hydroxymethyfurfural

DEFF Research Database (Denmark)

2011-01-01

The present invention relates to a method of producing 5-hydroxymethylfurfural by dehydration of fructose and/or glucose and/or mannose.......The present invention relates to a method of producing 5-hydroxymethylfurfural by dehydration of fructose and/or glucose and/or mannose....

What Stick Figures Tell Us about Irish Politics: Creating a Critical and Collaborative Learning Space

Science.gov (United States)

Feeney, Sharon; Hogan, John; Donnelly, Paul F.

2015-01-01

This paper focuses upon the interpretation of freehand drawings produced by a small sample of 220 first-year students taking an Irish politics introductory module in response to the question, "What is Irish Politics?" By sidestepping cognitive verbal-processing routes, through employing freehand drawing, we aim to create a critical and…

7 CFR 1033.13 - Producer milk.

Science.gov (United States)

2010-01-01

... Handling Definitions § 1033.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of components of skim milk), including nonfat components, and butterfat in milk of a producer that is: (a... percentages in paragraph (d)(4) of this section may be increased or decreased by the market administrator if...

7 CFR 1001.13 - Producer milk.

Science.gov (United States)

2010-01-01

... Handling Definitions § 1001.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of components of skim milk) and butterfat contained in milk of a producer that is: (a) Received by the operator... be increased or decreased by the Market Administrator if the Market Administrator finds that such...

7 CFR 1126.13 - Producer milk.

Science.gov (United States)

2010-01-01

... Handling Definitions § 1126.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of components of skim milk), including nonfat components, and butterfat contained in milk of a producer that is...) of this section may be increased or decreased by the market administrator if there is a finding that...

Make Computer Learning Stick.

Science.gov (United States)

Casella, Vicki

1985-01-01

Teachers are using computer programs in conjunction with many classroom staples such as art supplies, math manipulatives, and science reference books. Twelve software programs and related activities are described which teach visual and auditory memory and spatial relations, as well as subject areas such as anatomy and geography. (MT)

Making process improvement 'stick'.

Science.gov (United States)

Studer, Quint

2014-06-01

To sustain gains from a process improvement initiative, healthcare organizations should: Explain to staff why a process improvement initiative is needed. Encourage leaders within the organization to champion the process improvement, and tie their evaluations to its outcomes. Ensure that both leaders and employees have the skills to help sustain the sought-after process improvements.

Beyond Carrots and Sticks

DEFF Research Database (Denmark)

Reisch, Lucia A.; Sunstein, Cass R.; Gwozdz, Wencke

2017-01-01

Europeans favour such nudges. The simplest answer is that majorities in six European nations (Denmark, France, Germany, Hungary, Italy, and the UK) do so. We find majority approval for a series of nudges, including educational messages in movie theaters, calorie and warning labels, store placement promoting...

How Do Geckos Stick?

Science.gov (United States)

Short, Harold; Lundsgaard, Morten F. V.; Krajcik, Joseph S.

2008-01-01

Understanding how geckos--small lizards belonging to the family "Gekkonindae"--can "defy gravity" and walk across a ceiling provides a fascinating frame through which students can not only learn valuable content about electrostatic forces, but also engage in authentic scientific practice and explore new technologies based on gecko adhesion. In…

Producers' Complex Risk Management Choices

NARCIS (Netherlands)

Pennings, J.M.E.; Isengildina, O.; Irwin, S.H.; Garcia, P.; Good, D.L.

2008-01-01

Producers have a wide variety of risk management instruments available, making their choice(s) complex. The way producers deal with this complexity can vary and may influence the impact that the determinants, such as risk aversion, have on their choices. A recently developed choice bracketing

Producing colour pictures from SCAN

International Nuclear Information System (INIS)

Robichaud, K.

1982-01-01

The computer code SCAN.TSK has been written for use on the Interdata 7/32 minicomputer which will convert the pictures produced by the SCAN program into colour pictures on a colour graphics VDU. These colour pictures are a more powerful aid to detecting errors in the MONK input data than the normal lineprinter pictures. This report is intended as a user manual for using the program on the Interdata 7/32, and describes the method used to produce the pictures and gives examples of JCL, input data and of the pictures that can be produced. (U.K.)

Producing new radionuclides for medicine

International Nuclear Information System (INIS)

Michaut, C.

2009-01-01

The Arronax cyclotron, a new particle accelerator dedicated to the production of radionuclides for medicine and research has been commissioned in Nantes (France). Because of its unique features: an energy of 70 MeV and an intensity of 750 μA, Arronax will produce radionuclides that can not be produce in present cyclotrons. Among others it will produce Strontium-82 and Germanium-68 that are the precursors for Rubidium-82 and Gallium-68 respectively. 20 per cent of the research works will be dedicated to other domains like radioactive wastes, the radiation biological damage and the radiation damage on electronic devices. (A.C.)

7 CFR 1006.13 - Producer milk.

Science.gov (United States)

2010-01-01

... Handling Definitions § 1006.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of components of skim milk) and butterfat contained in milk of a producer that is: (a) Received by the operator... (d) (1) through (3) of this section may be increased or decreased by the market administrator if the...

7 CFR 1205.319 - Cotton-producing region.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Cotton-producing region. 1205.319 Section 1205.319... Cotton Research and Promotion Order Definitions § 1205.319 Cotton-producing region. Cotton-producing region means each of the following groups of cotton-producing States: (a) Southeast Region: Alabama...

7 CFR 1131.13 - Producer milk.

Science.gov (United States)

2010-01-01

... Handling Definitions § 1131.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of components of skim milk) and butterfat in milk of a producer that is: (a) Received by the operator of a pool... percentage in paragraph (d)(2) of this section may be increased or decreased by the market administrator if...

7 CFR 760.303 - Eligible livestock producer.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Eligible livestock producer. 760.303 Section 760.303... AGRICULTURE SPECIAL PROGRAMS INDEMNITY PAYMENT PROGRAMS Livestock Forage Disaster Program § 760.303 Eligible livestock producer. (a) To be considered an eligible livestock producer, the eligible producer on a farm...

Urinary Tract Infections (For Kids)

Medline Plus

Full Text Available ... Teens Teens site Sitio para adolescentes Body Mind Sexual Health Food & Fitness Diseases & Conditions Infections Drugs & Alcohol ... stick into your cup of urine. The stick has specially treated paper on it and if it ...

Analysis of potential fumonisin-producing Fusarium species in corn products from three main maize-producing areas in eastern China.

Science.gov (United States)

Zhang, Liping; Wang, Jiansheng; Zhang, Chulong; Wang, Qiaomei

2013-02-01

Fusarium species are common fungal contaminants of maize and a number of them can produce mycotoxin fumonisins. China is one of the largest maize producers in the world. This study investigated the contamination of maize samples from three areas in eastern China by Fusarium and fumonisin-producing fungi as well as their fumonisin-producing potential. A total of 22 Fusarium strains were isolated, 19 of which were able to produce fumonisin. Among the 19 strains, 16 belonged to F. verticillioides, two to F. subglutinans and one to F. proliferatum. The majority (17/19) of the fumonisin-forming strains were high FB(1) producers, which is a potential health risk for the population in these areas. Fusarium contamination in samples from the mideastern area was the most serious (11 Fusarium strains, with nine producing fumonisin, isolated from 24 samples), followed by the northeastern area (nine Fusarium strains, with all nine producing fumonisin, isolated from 21 samples) and the southeastern area (two Fusarium strains, with one producing fumonisin, isolated from 19 samples). Although the overall levels of FBs and contamination by fumonisin-producing fungi in corn samples were not serious, the contaminating Fusarium strains possessed fairly strong toxicogenic ability and potential risk for food safety. Copyright © 2012 Society of Chemical Industry.

All great ape species (Gorilla gorilla, Pan paniscus, Pan troglodytes, Pongo abelii) and two-and-a-half-year-old children (Homo sapiens) discriminate appearance from reality.

Science.gov (United States)

Karg, Katja; Schmelz, Martin; Call, Josep; Tomasello, Michael

2014-11-01

Nonhuman great apes and human children were tested for an understanding that appearance does not always correspond to reality. Subjects were 29 great apes (bonobos [Pan paniscus], chimpanzees [Pan troglodytes], gorillas [Gorilla gorilla], and orangutans [Pongo abelii]) and 24 2½-year-old children. In our task, we occluded portions of 1 large and 1 small food stick such that the size relations seemed reversed. Subjects could then choose which one they wanted. There was 1 control condition and 2 experimental conditions (administered within subjects). In the control condition subjects saw only the apparent stick sizes, whereas in the 2 experimental conditions they saw the true stick sizes as well (the difference between them being what the subjects saw first: the apparent or the real stick sizes). All great ape species and children successfully identified the bigger stick, despite its smaller appearance, in the experimental conditions, but not in the control. We discuss these results in relation to the understanding of object permanence and conservation, and exclude reversed reward contingency learning as an explanation. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

Producing superhydrophobic roof tiles

International Nuclear Information System (INIS)

Carrascosa, Luis A M; Facio, Dario S; Mosquera, Maria J

2016-01-01

Superhydrophobic materials can find promising applications in the field of building. However, their application has been very limited because the synthesis routes involve tedious processes, preventing large-scale application. A second drawback is related to their short-term life under outdoor conditions. A simple and low-cost synthesis route for producing superhydrophobic surfaces on building materials is developed and their effectiveness and their durability on clay roof tiles are evaluated. Specifically, an organic–inorganic hybrid gel containing silica nanoparticles is produced. The nanoparticles create a densely packed coating on the roof tile surface in which air is trapped. This roughness produces a Cassie–Baxter regime, promoting superhydrophobicity. A surfactant, n-octylamine, was also added to the starting sol to catalyze the sol–gel process and to coarsen the pore structure of the gel network, preventing cracking. The application of ultrasound obviates the need to use volatile organic compounds in the synthesis, thereby making a ‘green’ product. It was also demonstrated that a co-condensation process effective between the organic and inorganic species is crucial to obtain durable and effective coatings. After an aging test, high hydrophobicity was maintained and water absorption was completely prevented for the roof tile samples under study. However, a transition from a Cassie–Baxter to a Wenzel state regime was observed as a consequence of the increase in the distance between the roughness pitches produced by the aging of the coating. (paper)

Produced Water Management and Beneficial Use

International Nuclear Information System (INIS)

Brown, Terry; Frost, Carol; Hayes, Thomas; Heath, Leo; Johnson, Drew; Lopez, David; Saffer, Demian; Urynowicz, Michael; Wheaton, John; Zoback, Mark

2007-01-01

Large quantities of water are associated with the production of coalbed methane (CBM) in the Powder River Basin (PRB) of Wyoming. The chemistry of co-produced water often makes it unsuitable for subsequent uses such as irrigated agriculture. However, co-produced waters have substantial potential for a variety of beneficial uses. Achieving this potential requires the development of appropriate water management strategies. There are several unique characteristics of co-produced water that make development of such management strategies a challenge. The production of CBM water follows an inverse pattern compared to traditional wells. CBM wells need to maintain low reservoir pressures to promote gas production. This need renders the reinjection of co-produced waters counterproductive. The unique water chemistry of co-produced water can reduce soil permeability, making surface disposal difficult. Unlike traditional petroleum operations where co-produced water is an undesirable by-product, co-produced water in the PRB often is potable, making it a highly valued resource in arid western states. This research project developed and evaluated a number of water management options potentially available to CBM operators. These options, which focus on cost-effective and environmentally-sound practices, fall into five topic areas: Minimization of Produced Water, Surface Disposal, Beneficial Use, Disposal by Injection and Water Treatment. The research project was managed by the Colorado Energy Research Institute (CERI) at the Colorado School of Mines (CSM) and involved personnel located at CERI, CSM, Stanford University, Pennsylvania State University, the University of Wyoming, the Argonne National Laboratory, the Gas Technology Institute, the Montana Bureau of Mining and Geology and PVES Inc., a private firm

Produced Water Management and Beneficial Use

Energy Technology Data Exchange (ETDEWEB)

Terry Brown; Carol Frost; Thomas Hayes; Leo Heath; Drew Johnson; David Lopez; Demian Saffer; Michael Urynowicz; John Wheaton; Mark Zoback

2007-10-31

Large quantities of water are associated with the production of coalbed methane (CBM) in the Powder River Basin (PRB) of Wyoming. The chemistry of co-produced water often makes it unsuitable for subsequent uses such as irrigated agriculture. However, co-produced waters have substantial potential for a variety of beneficial uses. Achieving this potential requires the development of appropriate water management strategies. There are several unique characteristics of co-produced water that make development of such management strategies a challenge. The production of CBM water follows an inverse pattern compared to traditional wells. CBM wells need to maintain low reservoir pressures to promote gas production. This need renders the reinjection of co-produced waters counterproductive. The unique water chemistry of co-produced water can reduce soil permeability, making surface disposal difficult. Unlike traditional petroleum operations where co-produced water is an undesirable by-product, co-produced water in the PRB often is potable, making it a highly valued resource in arid western states. This research project developed and evaluated a number of water management options potentially available to CBM operators. These options, which focus on cost-effective and environmentally-sound practices, fall into five topic areas: Minimization of Produced Water, Surface Disposal, Beneficial Use, Disposal by Injection and Water Treatment. The research project was managed by the Colorado Energy Research Institute (CERI) at the Colorado School of Mines (CSM) and involved personnel located at CERI, CSM, Stanford University, Pennsylvania State University, the University of Wyoming, the Argonne National Laboratory, the Gas Technology Institute, the Montana Bureau of Mining and Geology and PVES Inc., a private firm.

Analysis of activity in swine producers group based on agricultural producers association in Biała district

Directory of Open Access Journals (Sweden)

Damian Knecht

2013-03-01

Full Text Available The process of pigs producer groups formation in Poland is quite dynamic. Currently on the pork market 181 groups operate, which includes about 4000 swine producers. The aim of this study was to characterize the activities of the Agricultural Producers Association in Biała District. The research tool was a personal questionnaire and the research sample consisted of 30 farmers. It has been shown that after joining the producers group, the investigated households reported an increase in sales volume and improved the flock production parameters. Majority of the respondents were not satisfied with the cooperation with meat processing companies.

Producing deep-water hydrocarbons

International Nuclear Information System (INIS)

Pilenko, Thierry

2011-01-01

Several studies relate the history and progress made in offshore production from oil and gas fields in relation to reserves and the techniques for producing oil offshore. The intention herein is not to review these studies but rather to argue that the activities of prospecting and producing deep-water oil and gas call for a combination of technology and project management and, above all, of devotion and innovation. Without this sense of commitment motivating men and women in this industry, the human adventure of deep-water production would never have taken place

Tekna's produced water conference 2005

International Nuclear Information System (INIS)

2005-01-01

The conference has 22 presentations discussing topics on discharge reduction, produced water quality, produced water re-injection, chemicals particularly environmentally friendly ones, separation technology, reservoir souring, total water management systems, pollution, oil in water problems and platform operation. Various field tests and experiences particularly from the offshore petroleum sector are presented (tk)

Faecal carriage of extended-spectrum b-lactamase-producing and AMpC b-lactamase-producing bacteria among Danish army recruits

DEFF Research Database (Denmark)

Hammerum, A.M; Lester, C.H; Jakobsen, L

2011-01-01

During May and June 2008, 84 Danish army recruits were tested for faecal carriage of extended-spectrum b-lactamase (ESBL)- producing and AmpC b-lactamase-producing bacteria. Three ESBL-producing (CTX-M-14a) Escherichia coli isolates, two AmpC-producing (CMY-2) E. coli isolates and one Amp...

Analysis of High Speed Jets Produced by a Servo Tube Driven Liquid Jet Injector

Science.gov (United States)

Portaro, Rocco; Ng, Hoi Dick

2017-11-01

In today's healthcare environment many types of medication must be administered through the use of hypodermic needles. Although this practice has been in use for many years, drawbacks such as accidental needle stick injuries, transmission of deadly viruses and bio-hazardous waste are still present. This study focuses on improving a needle free technology known as liquid jet injection, through the implementation of a linear servo tube actuator for the construction of a fully closed loop liquid jet injection system. This device has the ability to deliver both micro- and macro- molecules, high viscosity fluids whilst providing real time control of the jet pressure profile for accurate depth and dispersion control. The experiments are conducted using a prototype that consists of a 3 kW servo tube actuator, coupled to a specially designed injection head allowing nozzle size and injection volume to be varied. The device is controlled via a high speed servo amplifier and FPGA. The high speed jets emanating from the injector are assessed via high speed photography and through the use of a force transducer. Preliminary results indicate that the system allows for accurate shaping of the jet pressure profile, making it possible to target different tissue depths/types accurately.

Produced water - composition and analysis

International Nuclear Information System (INIS)

Kvernheim, Arne Lund

1998-01-01

Produced water can be defined as ''High volume waste-water separated from oil and gas that is produced from subsurface formations''. The water contains aliphatic and aromatic hydrocarbons, particulate matter and soluble salts as well as elements originating from formations and from sea water injections. Residues of chemicals may also be present. The accepted North Sea discharge limit is 40 ppm. In this presentation the focus will be on the chemical composition of produced water and on the challenges involved in developing and implementing analytical methods. The focus will also be on the development of a new oil-in-water analytical method as a replacement for the Freon method. 7 refs., 1 tab

Comparison of the virulence of exopolysaccharide-producing Prevotella intermedia to exopolysaccharide non-producing periodontopathic organisms.

Science.gov (United States)

Yamanaka, Takeshi; Yamane, Kazuyoshi; Furukawa, Tomoyo; Matsumoto-Mashimo, Chiho; Sugimori, Chieko; Nambu, Takayuki; Obata, Noboru; Walker, Clay B; Leung, Kai-Poon; Fukushima, Hisanori

2011-08-25

Evidence in the literature suggests that exopolysaccharides (EPS) produced by bacterial cells are essential for the expression of virulence in these organisms. Secreted EPSs form the framework in which microbial biofilms are built. This study evaluates the role of EPS in Prevotella intermedia for the expression of virulence. This evaluation was accomplished by comparing EPS-producing P. intermedia strains 17 and OD1-16 with non-producing P. intermedia ATCC 25611 and Porphyromonas gingivalis strains ATCC 33277, 381 and W83 for their ability to induce abscess formation in mice and evade phagocytosis. EPS-producing P. intermedia strains 17 and OD1-16 induced highly noticeable abscess lesions in mice at 107 colony-forming units (CFU). In comparison, P. intermedia ATCC 25611 and P. gingivalis ATCC 33277, 381 and W83, which all lacked the ability to produce viscous materials, required 100-fold more bacteria (109 CFU) in order to induce detectable abscess lesions in mice. Regarding antiphagocytic activity, P. intermedia strains 17 and OD1-16 were rarely internalized by human polymorphonuclear leukocytes, but other strains were readily engulfed and detected in the phagosomes of these phagocytes. These results demonstrate that the production of EPS by P. intermedia strains 17 and OD1-16 could contribute to the pathogenicity of this organism by conferring their ability to evade the host's innate defence response.

Incense smoke: clinical, structural and molecular effects on airway disease

Directory of Open Access Journals (Sweden)

Krishnaswamy Guha

2008-04-01

Full Text Available Abstract In Asian countries where the Buddhism and Taoism are mainstream religions, incense burning is a daily practice. A typical composition of stick incense consists of 21% (by weight of herbal and wood powder, 35% of fragrance material, 11% of adhesive powder, and 33% of bamboo stick. Incense smoke (fumes contains particulate matter (PM, gas products and many organic compounds. On average, incense burning produces particulates greater than 45 mg/g burned as compared to 10 mg/g burned for cigarettes. The gas products from burning incense include CO, CO2, NO2, SO2, and others. Incense burning also produces volatile organic compounds, such as benzene, toluene, and xylenes, as well as aldehydes and polycyclic aromatic hydrocarbons (PAHs. The air pollution in and around various temples has been documented to have harmful effects on health. When incense smoke pollutants are inhaled, they cause respiratory system dysfunction. Incense smoke is a risk factor for elevated cord blood IgE levels and has been indicated to cause allergic contact dermatitis. Incense smoke also has been associated with neoplasm and extracts of particulate matter from incense smoke are found to be mutagenic in the Ames Salmonella test with TA98 and activation. In order to prevent airway disease and other health problem, it is advisable that people should reduce the exposure time when they worship at the temple with heavy incense smokes, and ventilate their house when they burn incense at home.

Methods and systems for producing syngas

Science.gov (United States)

Hawkes, Grant L; O& #x27; Brien, James E; Stoots, Carl M; Herring, J. Stephen; McKellar, Michael G; Wood, Richard A; Carrington, Robert A; Boardman, Richard D

2013-02-05

Methods and systems are provided for producing syngas utilizing heat from thermochemical conversion of a carbonaceous fuel to support decomposition of at least one of water and carbon dioxide using one or more solid-oxide electrolysis cells. Simultaneous decomposition of carbon dioxide and water or steam by one or more solid-oxide electrolysis cells may be employed to produce hydrogen and carbon monoxide. A portion of oxygen produced from at least one of water and carbon dioxide using one or more solid-oxide electrolysis cells is fed at a controlled flow rate in a gasifier or combustor to oxidize the carbonaceous fuel to control the carbon dioxide to carbon monoxide ratio produced.

Producing liquid fuels from biomass

Science.gov (United States)

Solantausta, Yrjo; Gust, Steven

The aim of this survey was to compare, on techno-economic criteria, alternatives of producing liquid fuels from indigenous raw materials in Finland. Another aim was to compare methods under development and prepare a proposal for steering research related to this field. Process concepts were prepared for a number of alternatives, as well as analogous balances and production and investment cost assessments for these balances. Carbon dioxide emissions of the alternatives and the price of CO2 reduction were also studied. All the alternatives for producing liquid fuels from indigenous raw materials are utmost unprofitable. There are great differences between the alternatives. While the production cost of ethanol is 6 to 9 times higher than the market value of the product, the equivalent ratio for substitute fuel oil produced from peat by pyrolysis is 3 to 4. However, it should be borne in mind that the technical uncertainties related to the alternatives are of different magnitude. Production of ethanol from barley is of commercial technology, while biomass pyrolysis is still under development. If the aim is to reach smaller carbon dioxide emissions by using liquid biofuels, the most favorable alternative is pyrolysis oil produced from wood. Fuels produced from cultivated biomass are more expensive ways of reducing CO2 emissions. Their potential of reducing CO2 emissions in Finland is insignificant. Integration of liquid fuel production to some other production line is more profitable.

Produced water treatment methods for SAGD

Energy Technology Data Exchange (ETDEWEB)

Minnich, K. [Veolia Water Solutions and Technologies, Mississauga, ON (Canada)

2008-07-01

Produced water treatment methods for steam assisted gravity drainage (SAGD) processes were presented. Lime softening is used to remove sludge before weak acid cation processes. However, the process is not reliable in cold climates, and disposal of the sludge is now posing environmental problems in Alberta. High pH MVC evaporation processes use sodium hydroxide (NaOH) additions to prevent silica scaling. However the process produces silica wastes that are difficult to dispose of. The sorption slurry process was designed to reduce the use of caustic soda and develop a cost-effective method of disposing evaporator concentrates. The method produces 98 per cent steam quality for SAGD injection. Silica is sorbed onto crystals in order to prevent silica scaling. The evaporator concentrate from the process is suitable for on- and off-site deep well disposal. The ceramic membrane process was designed to reduce the consumption of chemicals and improve the reliability of water treatment processes. The ion exchange desilication process uses 80 per cent less power and produces 80 per cent fewer CO{sub 2} emissions than MVC evaporators. A comparative operating cost evaluation of various electric supply configurations and produced water treatment processes was also included, as well as an analysis of produced water chemistry. tabs., figs.

Comparative genomics of citric-acid-producing Aspergillus niger ATCC 1015 versus enzyme-producing CBS 513.88

DEFF Research Database (Denmark)

Andersen, Mikael Rørdam; Salazar, Margarita Pena; Schaap, Peter J.

2011-01-01

The filamentous fungus Aspergillus niger exhibits great diversity in its phenotype. It is found globally, both as marine and terrestrial strains, produces both organic acids and hydrolytic enzymes in high amounts, and some isolates exhibit pathogenicity. Although the genome of an industrial enzyme......-producing A. niger strain (CBS 513.88) has already been sequenced, the versatility and diversity of this species compel additional exploration. We therefore undertook whole-genome sequencing of the acidogenic A. niger wild-type strain (ATCC 1015) and produced a genome sequence of very high quality. Only 15...

Method of producing molybdenum-99

Science.gov (United States)

Pitcher, Eric John

2013-05-28

Method of producing molybdenum-99, comprising accelerating ions by means of an accelerator; directing the ions onto a metal target so as to generate neutrons having an energy of greater than 10 MeV; directing the neutrons through a converter material comprising techentium-99 to produce a mixture comprising molybdenum-99; and, chemically extracting the molybdenum-99 from the mixture.

Must producers earn a resource rent?

International Nuclear Information System (INIS)

Austvik, Ole Gunnar

2003-01-01

In petroleum producing countries it has been a prevailing opinion that a resource rent should be earned by petroleum producers due to the commodities' non-renewable nature. An important element in this logic is that the supply of oil and natural gas is limited to relatively few places in the world. As the resources are exploited, the remaining reserves are reduced. What is extracted today cannot be extracted tomorrow. Rationing of the scarce resource takes place through pricing mechanisms. Due to the scarcity the consumers must pay a higher price than the marginal production costs, so that the amounts supplied and demanded become equal. Most producers of oil and gas and not just the ones that produce the cheapest, have therefore until now earned an economic rent

Friction factor of CP aluminium and aluminium–zinc alloys

Indian Academy of Sciences (India)

zinc alloys using ring compression test at different temperatures from 303 K to 773 K. It is found that CP aluminium exhibits stick- ing whereas Al–Zn alloys do not exhibit sticking at elevated temperatures. Hot working of Al–Zn alloy is easier.

Assessing the feasibility, acceptability, and potential effectiveness of a behavioral-automaticity focused lifestyle intervention for African Americans with metabolic syndrome: The Pick two to Stick to protocol.

Science.gov (United States)

Fritz, Heather; Brody, Aaron; Levy, Philip

2017-09-01

Metabolic syndrome (MetS) significantly increases the risk of developing diabetes and cardiovascular disease. Being physically active and eating a healthy diet can reduce MetS risk factors. Too frequently, however, studies report that the effects of interventions targeting those factors are not maintained once interventions are withdrawn. A potential solution to the problem is targeting behavioral automaticity (habit-development) to aid in initiation and maintenance of health-behavior changes. The Pick two to Stick To (P2S2), is an 8-week, theory-based hybrid (face-to-face/telecoaching) habit focused lifestyle intervention designed to increase healthful physical activity and dietary behavioral automaticity. The purpose of this article is to describe the rationale and protocol for evaluating the P2S2 program's feasibility, acceptability and potential effectiveness. Using a prospective, non-comparative design, the P2S2 program will be implemented by trained occupational therapy 'coaches' to 40 African Americans aged 40 and above with MetS recruited from the emergency department. Semi-structured interviews with participants, bi-weekly research meetings with study staff, and observations of intervention delivery will provide data for a process evaluation. Estimates of effectiveness include weight, blood pressure, waist circumference, BMI, and behavioral automaticity measures that will be collected at baseline and week 20. The P2S2 program could facilitate the development of healthful dietary and physical activity habits in an underserved population. Whether interventions aimed at changing habits can feasibly influence this automaticity, particularly for high-risk, low resource communities where other barriers exist, is not known. This pilot study, therefore, will fill an important gap, providing insight to inform subsequent trials.

Features of static and dynamic friction profiles in one and two dimensions on polymer and atomically flat surfaces using atomic force microscopy

International Nuclear Information System (INIS)

Watson, G S; Watson, J A

2008-01-01

In this paper we correlate the Atomic Force Microscope probe movement with surface location while scanning in the imaging and Force versus distance modes. Static and dynamic stick-slip processes are described on a scale of nanometres to microns on a range of samples. We demonstrate the limits and range of the tip apex being fixed laterally in the force versus distance mode and static friction slope dependence on probe parameters. Micron scale static and dynamic friction can be used to purposefully manipulate soft surfaces to produce well defined frictional gradients

DOES ELECTRIC CAR PRODUCE EMISSIONS?

Directory of Open Access Journals (Sweden)

Vladimír RIEVAJ

2017-03-01

Full Text Available This article focuses on the comparison of the amount of emissions produced by vehicles with a combustion engine and electric cars. The comparison, which is based on the LCA factor results, indicates that an electric car produces more emissions than a vehicle with combustion engine. The implementation of electric cars will lead to an increase in the production of greenhouse gases.

Wintertime Emissions from Produced Water Ponds

Science.gov (United States)

Evans, J.; Lyman, S.; Mansfield, M. L.

2013-12-01

Every year oil and gas drilling in the U.S. generates billions of barrels of produced water (water brought to the surface during oil or gas production). Efficiently disposing of produced water presents a constant financial challenge for producers. The most noticeable disposal method in eastern Utah's Uintah Basin is the use of evaporation ponds. There are 427 acres of produced water ponds in the Uintah Basin, and these were used to evaporate more than 5 million barrels of produced water in 2012, 6% of all produced water in the Basin. Ozone concentrations exceeding EPA standards have been observed in the Uintah Basin during winter inversion conditions, with daily maximum 8 hour average concentrations at some research sites exceeding 150 parts per billion. Produced water contains ozone-forming volatile organic compounds (VOC) which escape into the atmosphere as the water is evaporated, potentially contributing to air quality problems. No peer-reviewed study of VOC emissions from produced water ponds has been reported, and filling this gap is essential for the development of accurate emissions inventories for the Uintah Basin and other air sheds with oil and gas production. Methane, carbon dioxide, and VOC emissions were measured at three separate pond facilities in the Uintah Basin in February and March of 2013 using a dynamic flux chamber. Pond emissions vary with meteorological conditions, so measurements of VOC emissions were collected during winter to obtain data relevant to periods of high ozone production. Much of the pond area at evaporation facilities was frozen during the study period, but areas that actively received water from trucks remained unfrozen. These areas accounted for 99.2% of total emissions but only 9.5% of the total pond area on average. Ice and snow on frozen ponds served as a cap, prohibiting VOC from being emitted into the atmosphere. Emissions of benzene, toluene, and other aromatic VOCs averaged over 150 mg m-2 h-1 from unfrozen pond

Molecular beam studies of oxide reduction by atomic hydrogen

International Nuclear Information System (INIS)

Olander, D.R.

1978-01-01

The graphite and oxide internals of a CTR are susceptible to chemical corrosion as well as to physical degradation by high-energy particles. Reactions of thermal atomic hydrogen with oxides are being studied. The hydrogen used is at thermal energy (0.22 eV). Typical data are reported for the H/UO 2 system. The reaction probability is plotted as a function of solid temperature at fixed beam intensity and moculation frequency. The reaction probability increases from low temperature to a high-temperature plateau at about 1300 0 C. Here the reaction rate is limited solely by the sticking probability of H on the surface; about one in seven of the incident atoms is chemisorbed by the surface and ultimately returns to the gas phase as water vapor. A reaction model comprising sticking, recombination to H 2 , solution and diffusion of H in the bulk of the UO 2 , surface reaction of adsorbed H with lattice oxygen atoms to produce the hydroxyl radical, and production of water is constructed. The rate constants for the elementary steps in the mechanism are tabulated. 2 figures, 2 tables

Dynamic Friction Performance of a Pneumatic Cylinder with Al2O3 Film on Cylinder Surface.

Science.gov (United States)

Chang, Ho; Lan, Chou-Wei; Wang, Hao-Xian

2015-11-01

A friction force system is proposed for accurately measuring friction force and motion properties produced by reciprocating motion of piston in a pneumatic cylinder. In this study, the proposed system is used to measure the effects of lubricating greases of different viscosities on the friction properties of pneumatic cylinder, and improvement of stick-slip motion for the cylinder bore by anodizing processes. A servo motor-driven ball screw is used to drive the pneumatic cylinder to be tested and to measure the change in friction force of the pneumatic cylinder. Experimental results show, that under similar test conditions, the lubricating grease with viscosity VG100 is best suited for measuring reciprocating motion of the piston of pneumatic cylinder. The wear experiment showed that, in the Al2O3 film obtained at a preset voltage 40 V in the anodic process, the friction coefficient and hardness decreased by 55% and increased by 274% respectively, thus achieving a good tribology and wear resistance. Additionally, the amplitude variation in the friction force of the pneumatic cylinder wall that received the anodizing treatment was substantially reduced. Additionally, the stick-slip motion of the pneumatic cylinder during low-speed motion was substantially improved.

Nanocrystalline TiAl powders synthesized by high-energy ball milling: effects of milling parameters on yield and contamination

International Nuclear Information System (INIS)

Bhattacharya, Prajina; Bellon, Pascal; Averback, Robert S.; Hales, Stephen J.

2004-01-01

High-energy ball milling was employed to produce nanocrystalline Ti-Al powders. As sticking of the powders can be sufficiently severe to result in a near zero yield, emphasis was placed on varying milling conditions so as to increase the yield, while avoiding contamination of the powders. The effects of milling parameters such as milling tools, initial state of the powders and addition of process control agents (PCA's) were investigated. Cyclohexane, stearic acid and titanium hydride were used as PCA's. Milling was conducted either in a Cr-steel vial with C-steel balls, or in a tungsten carbide (WC) vial with WC balls, using either elemental or pre-alloyed powders. Powder samples were characterized using X-ray diffraction, scanning and transmission electron microscopy. In the absence of PCA's mechanical alloying in a WC vial and attrition milling in a Cr-steel vial were shown to lead to satisfactory yields, about 65-80%, without inducing any significant contamination of the powders. The results suggest that sticking of the powders on to the milling tools is correlated with the phase evolution occurring in these powders during milling

Nonneutral plasma diagnostic commissioning for the ALPHA Antihydrogen experiment

Science.gov (United States)

Konewko, S.; Friesen, T.; Tharp, T. D.; Alpha Collaboration

2017-10-01

The ALPHA experiment at CERN creates antihydrogen by mixing antiproton and positron plasmas. Diagnostic measurements of the precursor plasmas are performed using a diagnostic suite, colloquially known as the ``stick.'' This stick has a variety of sensors and is able to move to various heights to align the desired diagnostic with the beamline. A cylindrical electrode, a faraday cup, an electron gun, and a microchannel-plate detector (MCP) are regularly used to control and diagnose plasmas in ALPHA. We have designed, built, and tested a new, upgraded stick which includes measurement capabilities in both beamline directions.

A comparison of successful and unsuccessful attempts in maximal bench pressing.

Science.gov (United States)

van den Tillaar, Roland; Ettema, Gertjan

2009-11-01

This study was designed to compare the differences in EMG and kinematics between successful and unsuccessful attempts in bench pressing at one repetition maximum (1RM) in recreational weight-trained subjects. We hypothesized that failure occurs during the sticking period (the period during which there is a temporary reduction in movement velocity). Eleven male subjects (age = 21.9 +/- 1.8 yr, mass = 80.0 +/- 11.2 kg, height = 1.79 +/- 0.08 m) with at least 1 yr of bench press training experience participated in this study. They performed attempts at 1RM and 1RM + 2.5 kg in bench press during which kinematics and muscle activity were recorded. One successful attempt and one unsuccessful attempt were used for further analysis. Both attempts showed the same sticking period, but only half of the failures occurred during that period. The main differences in the kinematics occurred during the sticking period. Muscle activity, in contrast, showed the same pattern in both attempts and only differed during the downward and the start of the upward movement of the lift. The sticking period occurs in both successful and unsuccessful attempts in maximal bench press. However, failure does not always occur during the sticking period.

Vibrational Interaction of Two Rotors with Friction Coupling

Directory of Open Access Journals (Sweden)

H. Larsson

2016-01-01

Full Text Available A lumped parameter model is presented for studying the dynamic interaction between two disks in relative rotational motion and in friction contact. The contact elastic and dissipative characteristics are represented by equivalent stiffness and damping coefficient in the axial as well as torsional direction. The formulation accounts for the coupling between the axial and angular motions by viewing the contact normal force a result of axial behavior of the system. The model is used to investigate stick-slip behavior of a two-disk friction system. In this effort the friction coefficient is represented as an exponentially decaying function of relative angular velocity, varying from its static value at zero relative velocity to its kinetic value at very high velocities. This investigation results in the establishment of critical curve defining two-parameter regions: one in which stick-slip occurs and that in which stick-slip does not occur. Moreover, the onset and termination of stick-slip, when it occurs, are related to the highest component frequency in the system. It is found that stick-slip starts at a period nearly equal to that of the highest component frequency and terminates at a period almost three times that of the highest component frequency.

Inventory transparency for agricultural produce through IOT

Science.gov (United States)

Srinivasan, S. P.; Sorna Shanthi, D.; Anand, Aashish V.

2017-06-01

Re-structuring the practices of traditional inventory management is becoming more essential to optimize the supply chain transparency and accuracy of agricultural produce. A flexible and transparent inventory management system is becoming the need of any agricultural commodity. It was noticed that the major setback for the farmers who are the suppliers of the farm produce is due to poor supply chain integration. The recent advent technologies and IT explosion can bring up a greater impact in the process of storing, tracking, distributing and monitoring perishable agriculture produce of day to day life. The primary focus of this paper is to integrate IoT into inventory management and other inbound logistics management of agriculture produce. The unique features of agricultural produce like a prediction of supply, demand, the location of warehouses, distribution and tracking of inventory can be integrated through IoT. This paper proposes a conceptual framework for inventory management transparency involved in the supply chain of agriculture produce.

24 CFR 3280.707 - Heat producing appliances.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Heat producing appliances. 3280.707... Systems § 3280.707 Heat producing appliances. (a) Heat-producing appliances and vents, roof jacks and... appliance, the heating appliance shall be installed by the manufacturer of the manufactured home in...

US producers in a competitive market

International Nuclear Information System (INIS)

Beck, M.

1987-01-01

The current (1986) situation in the world-wide uranium market is explained and the competitiveness of United States producers is considered in this context. Historical export contracts by US producers are examined to evaluate how sales quantities by region have changed. The influence of inflation and exchange rates on production costs are considered. The threat of US protectionism is discussed. Despite the contraction of the US uranium industry in recent years a number of US producers have remained competitive. Factors which could increase US competitiveness are listed. (U.K.)

Method of producing grouting mortar

Energy Technology Data Exchange (ETDEWEB)

Shelomov, I K; Alchina, S I; Dizer, E I; Gruzdeva, G A; Nikitinskii, V I; Sabirzyanov, A K

1980-10-07

A method of producing grouting mortar by mixing the cement with an aqueous salt solution is proposed. So as to increase the quality of the mortar through an acceleration of the time for hardening, the mixture is prepared in two stages, in the first of which 20-30% of the entire cement batch hardens, and in the second of which the remainder of the cement hardens; 1-3-% of an aqueous salt solution is used in quantities of 0.5/1 wt.-% of weight of the cement. The use of this method of producing grouting mortar helps to increase the flexural strength of the cement brick up to 50% after two days ageing by comparison with the strength of cement brick produced from grouting mortar by ordinary methods utilizing identical quantities of the initial components (cement, water, chloride).

7 CFR 1206.8 - Foreign producer.

Science.gov (United States)

2010-01-01

... produced, mangos beyond the person's own family use and having value at first point of sale. ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.8 Foreign producer. Foreign...

USA coal producer perspective

Energy Technology Data Exchange (ETDEWEB)

Porco, J. [Alpha Natural Resources, Latrobe, PA (US). Alpha Energy Global Marketing

2004-07-01

The focus is on the Central Appalachian coal industry. Alpha Natural Resources was formed in 2002 from Pittston Coal's Virginia and Coastal operations. AMCI's U.S. operations and Mears Enterprises in Pennsylvania were acquired later. The company produces 20-21 million tonnes per year and sells 20 million tonnes of steam coal and 10 million tonnes of exports, including some coal that is brokered. Foundry coke is a major product. Capital investment has resulted in increased productivity. Central Appalachia is expected to continue as a significant coal-producing region for supplying metallurgical coke. Production is expected to stabilize, but not increase; so the mines will have a longer life. 31 slides/overheads are included.

Size scaling of static friction.

Science.gov (United States)

Braun, O M; Manini, Nicola; Tosatti, Erio

2013-02-22

Sliding friction across a thin soft lubricant film typically occurs by stick slip, the lubricant fully solidifying at stick, yielding and flowing at slip. The static friction force per unit area preceding slip is known from molecular dynamics (MD) simulations to decrease with increasing contact area. That makes the large-size fate of stick slip unclear and unknown; its possible vanishing is important as it would herald smooth sliding with a dramatic drop of kinetic friction at large size. Here we formulate a scaling law of the static friction force, which for a soft lubricant is predicted to decrease as f(m)+Δf/A(γ) for increasing contact area A, with γ>0. Our main finding is that the value of f(m), controlling the survival of stick slip at large size, can be evaluated by simulations of comparably small size. MD simulations of soft lubricant sliding are presented, which verify this theory.

Modelling of internal structure in seismic analysis of a PHWR building

International Nuclear Information System (INIS)

Reddy, G.R.; Vaze, K.K.; Kushawaha, H.S.; Ingle, R.K.; Subramanian, K.V.

1991-01-01

Seismic analysis of complex and large structures, consisting of thick shear walls, such as Reactor Building is very involved and time consuming. It is a standard practice to model the structure as a stick model to predict reasonably the dynamic behaviour of the structure. It is required to determine approximate equivalent sectional properties of Internal Structure for representation in the stick model. The restraint to warping can change the stress distribution thus affecting the centre of rigidity and torsional inertia, Hence, standard formulae does not hold good for determination of sectional properties of the Internal Structure. In this case the equivalent sectional properties for the Internal Structure are calculated using a Finite Element Model (FEM) of the Internal Structure and applying unit horizontal forces in each direction. A 3-D stick model is developed using the guidelines. Using the properties calculated by FEM and also by standard formulae, the responses of the 3-D stick model are compared. (J.P.N.)

Stuck pipe: Causes, detection and prevention

Energy Technology Data Exchange (ETDEWEB)

Bailey, L; Jomnes, T [Schlumberger Cambridge Research (UK); Belaskie, J; Orban, J; Sheppard, M [Anadrill, Sugarland, TX (USA); Houwen, O; Jardine, S; McCann, D [Sedco Forex, Montrouge (France)

1991-10-01

Stuck pipe remains a major headache that demands and is getting industry-wide attention. It costs the oil industry between $200 and $500 million each year, occurs in 15% of wells, and in many cases is preventable. Several operators are making determined efforts to codify the warning signs and to improve communication for all on-site drilling and service company personnel, for which the data gathering ability of a computerized information system is a necessity. Meanwhile, better rig sensors and information systems are providing rig-floor smart'' alarms to help the driller recognize trouble before it gets out of hand. The causes of stuck pipe can be divided broadly among differential sticking, formation-related sticking and mechanical sticking. One of the results of the industry's current attention is a better understanding of the events leading up to stuck pipe and their interpretationn in terms of the causes of sticking. Knowing the causes is essential for taking remedial action. 15 figs., 19 refs.

Role of rotational energy component in the dynamics of 16O+198Pt reaction

Directory of Open Access Journals (Sweden)

Sharma Manoj K.

2017-01-01

Full Text Available The role of rotational energy is investigated in reference to the dynamics of 16O+198Pt →214Rn∗ reaction using the sticking (IS and the non-sticking (INS limits of moment of inertia within the framework of dynamical cluster decay model. The decay barrier height and barrier position get significantly modified for the use of sticking or non-sticking choice, which in turn reproduce the evaporation residue and the fusion-fission cross-sections nicely by the IS approach, while the INS approach provides feasible addressal of data only for evaporation residue channel. Moreover, the fragmentation path of decaying fragments of 214Rn∗ compound nucleus gets influenced for different choices of moment of inertia. Beside this, the role of nuclear deformations i.e. static, dynamic quadurpole (β2 and higher order static deformation up to β4 are duly investigated for both choices of the moment of inertia.

Stuck pipe: Causes, detection and prevention

Energy Technology Data Exchange (ETDEWEB)

Bailey, L.; Jomnes, T. (Schlumberger Cambridge Research (UK)); Belaskie, J.; Orban, J.; Sheppard, M (Anadrill, Sugarland, TX (USA)); Houwen, O.; Jardine, S.; McCann, D. (Sedco Forex, Montrouge (France))

1991-10-01

Stuck pipe remains a major headache that demands and is getting industry-wide attention. It costs the oil industry between $200 and $500 million each year, occurs in 15% of wells, and in many cases is preventable. Several operators are making determined efforts to codify the warning signs and to improve communication for all on-site drilling and service company personnel, for which the data gathering ability of a computerized information system is a necessity. Meanwhile, better rig sensors and information systems are providing rig-floor smart'' alarms to help the driller recognize trouble before it gets out of hand. The causes of stuck pipe can be divided broadly among differential sticking, formation-related sticking and mechanical sticking. One of the results of the industry's current attention is a better understanding of the events leading up to stuck pipe and their interpretationn in terms of the causes of sticking. Knowing the causes is essential for taking remedial action. 15 figs., 19 refs.