WorldWideScience

Sample records for sorbitan monooleate tween-80

  1. Phase Manifestation and Formation of Nanoemulsions Composed of Imidazolium-based Ionic Liquid, Tween 80/Span 80 and Labrafac Lipophile WL 1349

    Directory of Open Access Journals (Sweden)

    S. H. Ng

    2017-07-01

    Full Text Available onic liquids (ILs can enhance topical and transdermal delivery, as well as increase the solubility of sparingly soluble drugs. In the present work, pseudo-ternary phase diagrams of emulsions were composed of a mixture of non-ionic surfactants, polyoxyethylene sorbitan monooleate (Tween 80® and sorbitan monooleate (Span 80® in weight fraction: 1:1, 1:2, 2:1 and 2:3, LabrafacTM Lipophile WL 1349 as an oil phase and 1-hexyl-3-methylimidazolium chloride [(HMIM (Cl] as a continuous phase. Emulsion formulations were selected with 10% surfactants from the pseudo-ternary phase diagrams and further prepared at 298.2 ± 0.1 K. Acoustic emulsificationmethod was used to prepare nanoemulsions that were mixed with freshly prepared hydrocolloid gum. The area of the single-phase zone in pseudo-ternary phase diagrams that varied with Tween 80® /Span 80® ratio in the order of 2:1 > 1:1 > 2:3 > 1:2 where Span 80® was replaced by an equivalent weight of Tween 80®  to form IL-based nanoemulsions. [HMIM] [Cl] tended to create a two-phase system. Addition of carbopol® ultrez 20 copolymer into the continuous phase of the formulations gave single-phase nanoemulsions with good stability. The mixture of surfactants with weight ratio of 1:2 (Tween 80®/Span 80® showed a good stability with the smallest particle size and greater surface charges in the system. These ionic liquid-based nanoemulsions might have the potential in drug delivery systems.

  2. Novel Polyoxyethylene-Containing Glycolipids Are Synthesized in Corynebacterium matruchotii and Mycobacterium smegmatis Cultured in the Presence of Tween 80

    Directory of Open Access Journals (Sweden)

    Cindy Wang

    2011-01-01

    Full Text Available The addition of polyoxyethylene sorbitan monooleate (Tween 80 to a culture of mycobacteria greatly influences cell permeability and sensitivity to antibiotics but very little is known regarding the underlying mechanism. Here we show that Corynebacterium matruchotii (surrogate of mycobacteria converts Tween 80 to a structural series of polyoxyethylenic acids which are then used to form novel series-2A and series-2B glycolipids. Minor series-3 glycolipids were also synthesized. The polyoxyethylenic acids replaced corynomycolic acids in the cell wall. Correspondingly the trehalose dicorynomycolate content was reduced. MALDI mass spectrometry, MS-MS, 1H-NMR, and 13C-NMR were used to characterize the series-2 glycolipids. Series-2A glycolipid is trehalose 6-C36:2-corynomycolate-6′-polyoxyethylenate and series-2B glycolipid is trehalose 6-C36:2-corynomycolate-6′-furan ring-containing polyoxyethylenate. Mycobacterium smegmatis grown in the presence of Tween 80 also synthesizes series-2 type glycolipids. The synthesis of these novel glycolipids in corynebacteria and mycobacteria should result in gross changes in the cell wall permeability and drug sensitivity.

  3. Effect of carbon coating on cycle performance of LiFePO4/C composite cathodes using Tween80 as carbon source

    International Nuclear Information System (INIS)

    Huang, You-Guo; Zheng, Feng-Hua; Zhang, Xiao-Hui; Li, Qing-Yu; Wang, Hong-Qiang

    2014-01-01

    Highlights: • The Tween80 addition could enhance cycle stability of LiFePO 4 material. • The FTIR spectrum confirms Tween80 surfactant can bond with LiFePO 4 particles. • Some chemical bonds between material and carbon layer still exist after sintering. - Abstract: The influence of carbon coating on the cycle performance of LiFePO 4 /C composite cathodes using polyoxyethylenesorbitan monooleate (Tween80) as carbon source against lithium metal foil anode for Li-ion batteries was investigated in this paper. According to Infrared spectrum analysis (FTIR), the Tween80 surfactant molecules bond to the surface of LiFePO 4 and form an adsorption layer, which contribute to the formation of a homogeneous carbon layer tightly coating on the surface of LiFePO 4 particles in the process of sintering, due to a strong binding force provided by surface chemical bonds. The transmission electron microscopy (TEM) shows that the carbon layer around LiFePO 4 using Tween80 as carbon source still coating on the surface of LiFePO 4 after 200 cycles at 5 C rate while the carbon layer shed from the surface of LiFePO 4 using glucose as carbon source. As a result, the carbon-coated LiFePO 4 using Tween80 as carbon source exhibits much higher capacity retention than the sample using glucose as carbon source. Electrochemical impedance measurement (EIS) reveals that the carbon-coated LiFePO 4 electrode using Tween80 surfactant has a lower charge transfer resistance than the electrode using glucose as carbon source electrode after 100 and 200 cycles at 5 C rate

  4. [Effect of concomitant substances and addition order on the adsorption of Tween 80 on sand].

    Science.gov (United States)

    Xu, Wei; Zhao, Yong-sheng; Li, Sui; Dai, Ning

    2008-08-01

    Adsorption of Tween 80 on sand was investigated, and the effect of inorganic salts (CaCl2), anionic surfactant (SDS) and lignosulphonates (sodium lignosulphonate or ammonium lignosulphonate) on the adsorption of Tween 80 on sand were evaluated at 25 degrees C. The results show that saturated adsorption amount of Tween 80 on sand enhance when CaCl2 or SDS is added into flushing solution of Tween 80. And the adsorption of Tween 80 on sand increase with the increase of molar fraction of CaCl2 or SDS in mixed flushing solution. And adsorption amount of Tween 80 on sand also enhance when SDS is added into sand firstly. The effects of mixing ratios and addition order of lignosulphonates on adsorption of Tween 80 were considered. The results show that with the increase of molar fraction of lignosulphonates in mixing flushing solution, adsorption amount of Tween 80 on sand decrease. The adsorption amount of Tween 80 reduce 20%-75% due to the exist of ammonium lignosulphonate is superior to sodium lignosulphonate (10%-60%) when mix the lignosulphonates-Tween 80 at the total mass ratios of 1:10, while the adsorption amount of Tween 80 reduce 70%-90% at the total mass ratios of 1:2. Lignosulphonates added into sand firstly is more efficient than that together. Therefore,use of lignosulphonates as a preflush can reduce the adsorption of surfactants on sand and is a better method to applied in in situ flushing.

  5. Effects of Tween 80 on growth and biofilm formation in laboratory media

    Directory of Open Access Journals (Sweden)

    Christina Krogsård Nielsen

    2016-11-01

    Full Text Available Tween 80 is a widely used nonionic emulsifier that is added to cosmetics, pharmaceuticals and foods. Because of its widespread use we need to understand how it affects bacteria on our skin, in our gut, and in food products. The aim of this study is to investigate how Tween 80 affects the growth and antimicrobial susceptibility of Staphylococcus aureus, Listeria monocytogenes and Pseudomonas fluorescens, which are common causes of spoilage and foodborne illnesses. Addition of 0.1% Tween 80 to laboratory growth media increased the growth rate of planktonic S. aureus batch cultures, and it also increased the total biomass when S. aureus was grown as biofilms. In contrast, Tween 80 had no effect on batch cultures of L. monocytogenes, it slowed the growth rate of P. fluorescens, and it led to formation of less biofilm by both L. monocytogenes and P. fluorescens. Furthermore, Tween 80 lowered the antibacterial efficacy of two hydrophobic antimicrobials: rifampicin and the essential oil isoeugenol. Our findings underline the importance of documenting indirect effects of emulsifiers when studying the efficacy of hydrophobic antimicrobials that are dispersed in solution by emulsification, or when antimicrobials are applied in food matrixes that include emulsifiers. Furthermore, the species-specific effects on microbial growth suggests that Tween 80 in cosmetics and food products could affect the composition of skin and gut microbiota, and the effect of emulsifiers on the human microbiome should therefore be explored to uncover potential health effects.

  6. Sorbitan sesquioleate

    DEFF Research Database (Denmark)

    Bennike, Niels Højsager; Johansen, Jeanne Duus

    2016-01-01

    BACKGROUND: Sorbitan sesquioleate (SSO) has been added to fragrance mix I (FM I) as an emulsifier since the 1990s. Being a contact allergen itself, SSO has the potential to cause false-positive reactions to FM I. Recent results obtained with selected FM I-positive patients have shown that 5% have...... concomitant positive reactions to SSO. OBJECTIVES: To investigate the 5-year prevalence of contact allergy to SSO and evaluate the importance of SSO allergy when patch test results for FM I are interpreted. METHODS: This was a retrospective database study of consecutively patch tested eczema patients (n = 4......,637) from 2010 to 2014. All patients were tested with our baseline series including FM I and SSO 20% in pet. RESULTS: Sensitization to SSO was identified in 9 (0.2%) patients. The proportion of FM I-positive patients with concomitant positive reactions to SSO was 1.4%. CONCLUSIONS: SSO is a rare cause...

  7. Sorption of a nonionic surfactant Tween 80 by minerals and soils

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Soyoung, E-mail: soyoung@pusan.ac.kr; Jeong, Hoon Young, E-mail: hjeong@pusan.ac.kr

    2015-03-02

    Highlights: • Tween 80 sorption varies significantly among soil minerals. • Sorption mechanisms and atomic compositions explain to mineral-specific sorption. • Clay minerals and SOM in soils are the key contributors to Tween 80 sorption. • Hysteresis suggests the potential difficulty in removing residual surfactants. - Abstract: Batch experiments were conducted to evaluate Tween 80 sorption by oxides, aluminosilicates, and soils. For oxides, the sorption by silica and alumina follow linear isotherms, and that by hematite follows a Langmuir isotherm. Considering isotherm type and surface coverage, Tween 80 may partition into the silica/alumina–water interface, whereas it may bind to hematite surface sites. Among aluminosilicates, montmorillonite shows the greatest sorption due to the absorption of Tween 80 into interlayers. For other aluminosilicates, it sorbs to surfaces, with the sorption increasing as plagioclase < vermiculite < kaolinite. This results from the relative reactivity among surface sites: ≡NaOH, ≡CaOH << ≡SiOH < ≡AlOH. Experiments using dry- and wet-sieved soils reveal that fine-grained clay minerals, difficult to separate by dry-sieving, contribute significantly to Tween 80 sorption. The greater sorption by untreated soils than H{sub 2}O{sub 2}-treated soils indicates that soil organic matter is a vital sorbent. The sorption hysteresis, contributed to by clay minerals and soil organic matter, is characterized by the greater sorption during the desorption than the sorption stages. This suggests the potential difficulty in removing surfactants from soils. Also, sorption of surfactants can adversely affect surfactant-enhanced remediation by decreasing the aquifer permeability and the availability of surfactants for micellar solubilization.

  8. Hyaluronan/Tween 80-assisted synthesis of silver nanoparticles for biological application

    Science.gov (United States)

    Li, Hui-Jun; Zhang, An-Qi; Sui, Li; Qian, Dong-Jin; Chen, Meng

    2015-02-01

    Water-soluble and well-stabilized silver nanoparticles (NPs) of small size have been synthesized using hyaluronan (HA) and Tween 80 as reducing and stabilizing agents. The effect of reaction conditions on the formation process of silver NPs was studied, and an aggregative growth mechanism of the silver NPs dominated in HA/Tween 80 system at pH 12 has been proposed. The obtained Ag NPs were characterized by UV-Vis spectroscopy, transmission electron microscopy, X-ray powder diffraction, and X-ray photoelectron spectroscopy. Moreover, the stability of the HA-Tween 80-silver NPs in normal saline was also studied, and a flexible blend membrane containing chitosan, gelatin, and the HA-Tween 80-silver NPs was prepared for further biological applications. Due to the high specific surface area and improved stability of silver NPs, the chitosan-gelatin-silver membrane has shown high antibacterial activity for strains of Escherichia coli. The cell viability tests indicate that the polymer membrane is non-cytotoxic to HepG2 cells, which might be attributed to its good biocompatibility.

  9. Hyaluronan/Tween 80-assisted synthesis of silver nanoparticles for biological application

    International Nuclear Information System (INIS)

    Li, Hui-Jun; Zhang, An-Qi; Sui, Li; Qian, Dong-Jin; Chen, Meng

    2015-01-01

    Water-soluble and well-stabilized silver nanoparticles (NPs) of small size have been synthesized using hyaluronan (HA) and Tween 80 as reducing and stabilizing agents. The effect of reaction conditions on the formation process of silver NPs was studied, and an aggregative growth mechanism of the silver NPs dominated in HA/Tween 80 system at pH 12 has been proposed. The obtained Ag NPs were characterized by UV–Vis spectroscopy, transmission electron microscopy, X-ray powder diffraction, and X-ray photoelectron spectroscopy. Moreover, the stability of the HA–Tween 80-silver NPs in normal saline was also studied, and a flexible blend membrane containing chitosan, gelatin, and the HA–Tween 80-silver NPs was prepared for further biological applications. Due to the high specific surface area and improved stability of silver NPs, the chitosan–gelatin-silver membrane has shown high antibacterial activity for strains of Escherichia coli. The cell viability tests indicate that the polymer membrane is non-cytotoxic to HepG2 cells, which might be attributed to its good biocompatibility

  10. Preparation of Tween 80-Zn/Al-Levodopa-Layered Double Hydroxides Nanocomposite for Drug Delivery System

    Directory of Open Access Journals (Sweden)

    Aminu Umar Kura

    2014-01-01

    Full Text Available We incorporated anti-Parkinsonian drug, levodopa (dopa, in Zn/Al-LDH by coprecipitation method to form dopa-LDH nanocomposite. Further coating of Tween-80 on the external surfaces of dopa-LDH nanocomposite was achieved through the oxygen of C=O group of Tween-80 with the layer of dopa-LDH nanocomposite. The final product is called Tween-dopa-LDH nanocomposite. The X-ray diffraction indicates that the Tween-dopa-LDH nanocomposite was formed by aggregation structure. From the TGA data, the Tween-80 loading on the surface of LDH and dopa-LDH was 8.6 and 7.4%, respectively. The effect of coating process on the dopa release from Tween-dopa-LDH nanocomposite was also studied. The release from Tween-dopa-LDH nanocomposite shows slower release compared to the release of the drug from dopa-LDH nanocomposite as done previously in our study, presumably due to the retarding shielding effect. The cell viability study using PC12 showed improved viability with Tween-80 coating on dopa-LDH nanocomposite as studied by mitochondrial dehydrogenase activity (MTT assay.

  11. Formulation and optimization of virgin coconut oil with Tween-80 incorporated in gellan gum hydrogel

    Science.gov (United States)

    Muktar, Muhammad Zulhelmi; Rose, Laili bt Che; Amin, Khairul Anuar Mat

    2017-09-01

    The demand for wound care products especially advance and active wound care product are huge. Honey and virgin coconut oil (VCO) are well-known as an ancient treatment to treat wound with its great properties such as antibacterial, anti-inflammatory and anti-viral. In this study, the potential of VCO incorporated in gellan gum (GG) hydrogel was examined. A surfactant, Tween-80 was introduced to reduce the interfacial tension between VCO and water. Ternary phase diagram was constructed to get the microemulsion of VCO. The compositions of VCO and Tween-80 at stable region were chosen and incorporated in GG solution. The swelling, water vapor transmission rates (WVTR) and gel fraction were significantly affected by the composition of VCO. Higher amount of VCO in GG hydrogel increased the tensile strength and gel fraction at a cost of decreased in swelling and WVTR values.

  12. Tween 80 containing lipid nanoemulsions for delivery of indinavir to brain

    Directory of Open Access Journals (Sweden)

    Kandadi Prabhakar

    2013-09-01

    Full Text Available Indinavir is a protease inhibitor used in the treatment of HIV infection. However, it has limited efficacy in eradicating the virus in the brain due to efflux by P-glycoprotein (P-gp expressed at the blood–brain barrier (BBB. The objective of this work was to develop an o/w lipid nanoemulsion (LNE of indinavir using Tween 80 as co-emulsifier to improve its brain specific delivery. LNEs were prepared with different compositions and were characterized for globule size, polydispersity index, zeta potential and in vitro drug release. Five formulations were then evaluated for drug content, entrapment efficiency and stability after which brain uptake studies were carried out using fluorescent labeled LNEs and pharmacokinetic (PK and tissue distribution studies were conducted after intravenous administration in mice. Brain uptake of indinavir was shown to be improved for a 1% Tween 80 containing formulation (F5 compared to a formulation containing 0.3% cholesterol (F2. In PK studies, the brain level of indinavir subsequent to administration of F5 was significantly (P<0.05 higher than produced by administration of a drug solution (2.44-fold or a control nanoemulsion (F1 (1.48-fold or formulation F2 (1.6-fold. The increased brain specific accumulation of indinavir from F5 is probably due to enhanced low density lipoprotein-mediated endocytosis and P-gp inhibition by Tween 80 at the BBB. These results suggest Tween 80 containing LNEs could provide a simple but effective means of delivering indinavir to brain.

  13. Mutagenicity of Tween 80-solvated mild gasification products in the Ames salmonella microsomal assay system

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-13

    The results of the Tween 80-solvated Ames testing of six mild gasification samples indicate significant mutagenic activity only in the composite materials (MG-119 and MG-120), previously suspected from the DMSO-solvated assays, which had shown some variable but ultimately insignificant mutagenic responses. The activity of these samples from the Tween 80-solvated assays was quite low when compared to either the positive controls or the SRC-II HD coal-liquefaction reference material. The class of mutagenic activity expressed by these samples solvated in Tween 80 was that of an indirect-acting, frameshift mutagen(s) since significant activity was found only on tester strain TA98 in the presence of the metabolic activation fraction (S9). Because DMSO and other solvents have been shown to affect the mutagenic activity of certain pure chemicals, the possibility of solvent/mutagen interactions in complex mixtures such as coal-derived liquids exists. Thus, the testing of the genotoxic activity of undefined, chemically complex compounds may require the use of at least two solvent systems to reduce the possibility of artifactual findings. 10 refs., 4 tabs.

  14. Diagnosis of spontaneous bacterial peritonitis: Role of tween 80 and triton X in ascitic fluid cultures

    Directory of Open Access Journals (Sweden)

    Iyer R

    2009-01-01

    Full Text Available A patient with alcoholic cirrhosis of the liver, portal hypertension with hepatic encephalopathy and spontaneous bacterial peritonitis (SBP was admitted in an obtunded condition. Attempts at delineating the aetiology of the SBP using conventional cultures as well as automated systems were not successful. The use of non-anionic surfactant agents such as Tween 80-incorporated blood agar and Triton X treatment of the specimens facilitated the growth of Klebsiella pneumoniae from the ascitic fluid, which otherwise would have been concluded to represent culture-negative neutrocytic ascites. Thus, the use of the aforementioned agents could be explored in elucidating the aetiology of body cavity infections when conventional methods fail.

  15. Current generation in microbial electrolysis cells with addition of amorphous ferric hydroxide, Tween 80, or DNA

    KAUST Repository

    Ren, Lijiao

    2012-11-01

    Iron-oxide nanoparticles and the Tween 80 have previously been shown to improve power generation in microbial fuel cells (MFCs), presumably by improving electron transfer from the bacteria to the anode. We examined whether several chemicals would affect current production in single-chamber microbial electrolysis cells (MECs), where hydrogen gas is produced at the cathode, using mixed cultures and Geobacter sulfurreducens. Tween 80 did not increase the current. Fe(OH) 3 addition increased the maximum current density of both the mixed cultures (from 6.1 ± 0.9 A/m 2 to 8.8 ± 0.3 A/m 2) and pure cultures (from 4.8 ± 0.5 A/m 2 to 7.4 ± 1.1 A/m 2). Improved current production was sustained even after iron was no longer added to the medium. It was demonstrated that increased current resulted from improved cathode performance. Analysis using electrochemical impedance spectroscopy (EIS) showed that the iron primarily reduced the diffusion resistances of the cathodes, and scanning electron microscopy (SEM) images showed the formation of highly porous structures on the cathode. The addition of DNA also did not improve MEC or MFC performance. These results demonstrated that among these treatments only Fe(OH) 3 addition was a viable method for enhancing current densities in MECs, primarily by improving cathode performance. Copyright © 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights.

  16. A specific Tween-80-Rhodamine S-MWNTs phosphorescent reagent for the detection of trace calcitonin

    Energy Technology Data Exchange (ETDEWEB)

    Liu Jiaming, E-mail: zzsyliujiaming@163.com [Department of Chemistry and Environmental Science, Zhangzhou Normal College, Zhangzhou, 363000 (China); Huang Xiaomei; Zhang Lihong; Zheng Zhiyong [Department of Chemistry and Environmental Science, Zhangzhou Normal College, Zhangzhou, 363000 (China); Department of Food and Biological Engineering, Zhangzhou Institute of Technology, Zhangzhou, 363000 (China); Lin Xuan; Zhang Xiaoyang; Jiao Li; Cui Malin [Department of Chemistry and Environmental Science, Zhangzhou Normal College, Zhangzhou, 363000 (China); Jiang Shulian [Fujian Provincial Bureau of Quality and Technical Supervision, Zhangzhou, 363000 (China); Lin Shaoqin [Department of Biochemistry, Fujian Education College, Fuzhou 350001 (China)

    2012-09-26

    Graphical abstract: A new Tween-80-Rhodamine S-water-soluble multi-walled carbon nanotubes (Tween-80-Rhod.S-MWNTs-EDC-NHS, TRMEN) phosphorescent labelling reagent was developed. High sensitive solid substrate room temperature phosphorescence immunoassay (SSRTPIA) for the determination of calcitonin (CT) in human serum and the prediction of human diseases based on the TRMEN could be used to label anti-calcitonin antibody (Ab{sub CT}) to form the TRMEN-Ab{sub CT} labelling product, which could take high specific immunoreaction with CT causing that the {Delta}I{sub p} of the system was linear to the content of CT. Moreover, the reaction mechanisms of both labelling Ab{sub CT} by TRMEN and SSRTPIA for the determination of trace CT were discussed. This research not only provides a new hormones analysis method, but also expands the application field of MWNTs and promotes the development of SSRTP and IA. --Highlights: Black-Right-Pointing-Pointer A Tween-80-Rhodamine S-multi-walled carbon nanotubes labelling reagent was developed. Black-Right-Pointing-Pointer The phosphorescence immunoassay was established for the determination of calcitonin. Black-Right-Pointing-Pointer This method has been applied to determine CT and the prediction of diseases. Black-Right-Pointing-Pointer The structure of MWNTs was characterized with SEM and IR. Black-Right-Pointing-Pointer The mechanisms for both determining trace CT and labelling Ab{sub CT} were discussed. - Abstract: The present study proposed a simple sensitive and specific immunoassay for the quantification of calcitonin (CT) in human serum with water-soluble multi-walled carbon nanotubes (MWNTs). The -COOH group of MWNTs could react with the -NH- group of rhodamine S (Rhod.S) molecules to form Rhod.S-MWNTs, which could emit room temperature phosphorescence (RTP) on acetate cellulose membrane (ACM) and react with Tween-80 to form micellar compound. Tween-80-Rhod.S-MWNTs (TRM), as a phosphorescent labelling reagent, could

  17. Influence of Sodium Lauryl Sulfate and Tween 80 on Carbamazepine–Nicotinamide Cocrystal Solubility and Dissolution Behaviour

    Science.gov (United States)

    Li, Mingzhong; Qiao, Ning; Wang, Ke

    2013-01-01

    The influence of the surfactants of sodium lauryl sulfate (SLS) and Tween 80 on carbamazepine–nicotinamide (CBZ–NIC) cocrystal solubility and dissolution behaviour has been studied in this work. The solubility of the CBZ–NIC cocrystal was determined by measuring the eutectic concentrations of the drug and the coformer. Evolution of the intrinsic dissolution rate (IDR) of the CBZ–NIC cocrystal was monitored by the UV imaging dissolution system during dissolution. Experimental results indicated that SLS and Tween 80 had little influence upon the solubility of the CBZ–NIC cocrystal but they had totally opposite effects on the IDR of the CBZ–NIC cocrystal during dissolution. SLS significantly increased the IDR of the CBZ–NIC cocrystal while Tween 80 decreased its IDR. PMID:24300560

  18. Influence of Sodium Lauryl Sulfate and Tween 80 on Carbamazepine–Nicotinamide Cocrystal Solubility and Dissolution Behaviour

    Directory of Open Access Journals (Sweden)

    Ke Wang

    2013-10-01

    Full Text Available The influence of the surfactants of sodium lauryl sulfate (SLS and Tween 80 on carbamazepine–nicotinamide (CBZ–NIC cocrystal solubility and dissolution behaviour has been studied in this work. The solubility of the CBZ–NIC cocrystal was determined by measuring the eutectic concentrations of the drug and the coformer. Evolution of the intrinsic dissolution rate (IDR of the CBZ–NIC cocrystal was monitored by the UV imaging dissolution system during dissolution. Experimental results indicated that SLS and Tween 80 had little influence upon the solubility of the CBZ–NIC cocrystal but they had totally opposite effects on the IDR of the CBZ–NIC cocrystal during dissolution. SLS significantly increased the IDR of the CBZ–NIC cocrystal while Tween 80 decreased its IDR.

  19. Influence of sodium lauryl sulfate and tween 80 on carbamazepine-nicotinamide cocrystal solubility and dissolution behaviour.

    Science.gov (United States)

    Li, Mingzhong; Qiao, Ning; Wang, Ke

    2013-10-11

    The influence of the surfactants of sodium lauryl sulfate (SLS) and Tween 80 on carbamazepine-nicotinamide (CBZ-NIC) cocrystal solubility and dissolution behaviour has been studied in this work. The solubility of the CBZ-NIC cocrystal was determined by measuring the eutectic concentrations of the drug and the coformer. Evolution of the intrinsic dissolution rate (IDR) of the CBZ-NIC cocrystal was monitored by the UV imaging dissolution system during dissolution. Experimental results indicated that SLS and Tween 80 had little influence upon the solubility of the CBZ-NIC cocrystal but they had totally opposite effects on the IDR of the CBZ-NIC cocrystal during dissolution. SLS significantly increased the IDR of the CBZ-NIC cocrystal while Tween 80 decreased its IDR.

  20. Stability studies of silymarin nanoemulsion containing Tween 80 as a surfactant

    Directory of Open Access Journals (Sweden)

    Rabea Parveen

    2015-01-01

    Full Text Available Background: Silymarin, a flavonolignan from "milk thistle" (Silybum marianum plant is used almost exclusively for hepatoprotection. Because of its low bioavailability, it was incorporated into a nanoemulsion formulation. The aim of the present study was to check the stability of silymarin nanoemulsion at different temperatures for 3 months. Materials and Methods: The oil-in-water based nanoemulsion formulation was prepared by titration method. Silymarin nanoemulsion was characterized by droplet size, viscosity, and refractive index. Droplet size, viscosity, and refractive index were determined every month. The shelf-life of silymarin nanoemulsion was determined by accelerated stability testing. Results: It was found that there was no significant change in the droplet size, viscosity, and refractive index at refrigerator and room temperature during the period of 3 months. The half-life of the optimized nanoemulsion formulation was found to be 4.74 years at room temperature. Conclusion: These results indicated that stability of silymarin can be enhanced in nanoemulsion formulation using Tween 80 as a surfactant.

  1. Impact of lactose starvation on the physiology of Lactobacillus casei GCRL163 in the presence or absence of tween 80.

    Science.gov (United States)

    Al-Naseri, Ali; Bowman, John P; Wilson, Richard; Nilsson, Rolf E; Britz, Margaret L

    2013-11-01

    The global proteomic response of the nonstarter lactic acid bacteria Lactobacillus casei strain GCRL163 under carbohydrate depletion was investigated to understand aspects of its survival following cessation of fermentation. The proteome of L. casei GCRL163 was analyzed quantitatively after growth in modified MRS (with and without Tween 80) with different levels of lactose (0% lactose, starvation; 0.2% lactose, growth limiting; 1% lactose, non-growth-limited control) using gel-free proteomics. Results revealed that carbohydrate starvation lead to suppression of lactose and galactose catabolic pathways as well as pathways for nucleotide and protein synthesis. Enzymes of the glycolysis/gluconeogenesis pathway, amino acid synthesis, and pyruvate and citrate metabolism become more abundant as well as other carbohydrate catabolic pathways, suggesting increased optimization of intermediary metabolism and scavenging. Tween 80 did not affect growth yield; however, proteins related to fatty acid biosynthesis were repressed in the presence of Tween 80. The data suggest that L. casei adeptly switches to a scavenging mode, using both citrate and Tween 80, and efficiently adjusts energetic requirements when carbohydrate starved and thus can sustain survival for weeks to months. Explaining the adaptation of L. casei during lactose starvation will assist efforts to maintain viability of L. casei and extend its utility as a beneficial dietary adjunct and fermentation processing aid.

  2. Influence of Tween 80 on DNA repair in E.Coli B/rT- after gamma irradiation

    International Nuclear Information System (INIS)

    Turanitz, K.; Stehlik, G.; Hammerschmid, F.; Delac, M.

    1974-01-01

    Escherichia coli B/rT - was used to study the effect of Tween 80 (2 hours incubation in 0,002 per cent solution) on the total DNA-repair process after exposure to γ-rays. The mutant E.coli B/rT - was able to repair DNA damages after 2,5 krad ( 60 Co) within 25 minutes in such a way, that this DNA showed no difference in its gradient ultracentrifugation pattern as compared with the control DNA; DNA damages after 23 krad were repaired only to about 80% as compared to the control sample. It was found that even at this low concentration sample Tween 80 reduces the velocity as well as the total amount DNA-repair. After irradiation with 30 krad 60 Co and a repair period of 25 minutes (37 - C, in darkness) radiation damaged DNA in phosphate buffer (M9) was repaired to only 50% in samples preincubated with 0,002 percent Tween 80, as compared to irradiated control samples without Tween 80. (author)

  3. Effect of tween 80 on nanoparticle preparation of modified chitosan for targeted delivery of combination doxorubicin and curcumin analogue

    Science.gov (United States)

    Sukmawati, Anita; Utami, Wahyu; Yuliani, Ratna; Da'i, Muhammad; Nafarin, Akhmad

    2018-02-01

    Delivery of anticancer is facing several problems including unspecific delivery of active substance to the targeted cell. The conjugation between chitosan and folate (chitosan-FA) was used for nanoparticle preparation containing combination of doxorubicin (DOX) and curcumin analogue, 2,5-bis-(4-hydroxi,3,5-dimethyl)-benzylidincylopentanone, as active substances. The purpose of this research is investigating formulation aspect for chitosan-FA nanoparticle by addition various tween 80 to achieve desired nano-size particle. The ionic gelation method was used for nanoparticle preparation using 0.05% w/v chitosan-FA with addition of 0.1 and 0.5% v/v of tween 80. The result showed that the high concentration of tween 80 during nanoparticle preparation lead to formation of smaller size particle. The 111.8 ±4.11 nm particle size was revealed by addition of 0.5% v/v tween 80 during chitosan-FA nanoparticle preparation loaded with active substances.

  4. Modification of crystal habit of ibuprofen using the phase partition technique: effect of aerosil and tween 80 in binding solvent.

    Science.gov (United States)

    Umprayn, K; Luengtummuen, A; Kitiyadisai, C; Pornpiputsakul, T

    2001-11-01

    A ternary diagram, representing the solubility of binding solvent (chloroform) in a mixture of ethanol and water, was constructed. For this study, the solvent mixture that gave the best ibuprofen pellets (IPs) was composed of chloroform.ethanol:water at a ratio of 1.5%:8%:90.5%. The suitable agitator speed, temperature, and mixing time were found to be 1,500 rpm, 25 degrees C +/- 2 degrees C, and 20 min, respectively. In addition, suitable stirring time when the phase partition process of IPs began was 15 min. IPs obtained from these conditions were small and round, approximately 1 mm; surface determination by scanning electron microscopy (SEM) indicated that the IPs were composed of drug microcrystals rearranged on the surface. For the dissolution, IPs showed lower drug release when compared with pure ibuprofen crystal (IC) (f2 analysis). An attempt to modify the dissolution property of IP by incorporating various concentrations of Aerosil and Tween 80 in the binding solvent was made. Microscopic appearance showed that both Aerosil and Tween 80 gave less spherical pellets when compared with the use of binding solvent alone. For both the Aerosil and Tween 80 employed, the results indicated a change in rearrangement of drug microcrystals and a change in crystal habit. However, Tween 80 gave more change of the crystallographic direction of drug microcrystals than Aerosil. In term of dissolution, the results showed that employing Tween 80 at 1.2% gave the highest drug release compared to the use of Aerosil and IC alone (f2 analysis). These pellets had a good flow property, as indicated by Carr's compressibility, flow rate, and angle of repose, and they can be compressed into a tablet, encapsulated by suitable polymer, or pulverized to obtain micronized crystals. In the case of compression into tablets, the dissolution profiles of these tablets compared with those of commercial product meet the USP 24 requirement (Q > or = 80% at 60 min).

  5. Effects of the surfactant Tween 80 on the growth and dibenzothiophene utilization by Exophiala spinifera isolated from oil- contaminated soil

    Directory of Open Access Journals (Sweden)

    Fatemeh Elmi

    2016-06-01

    Full Text Available Introduction: Oil is one of the most important energy sources that contain variety of organosulfur compounds that are combustible and can produce sulfur dioxide which will cause pollution over the atmosphere and the soil. Dibenzothiophene (DBT is often used as a model for biodesulfurization studies and surfactant Tween80 increases the solubility of DBT in water that leads to higher consumption by microorganisms. Materials and methods: DBT specific UV spectrophotometry at a wavelength of 323 nm was used to evaluate the ability of isolated Exophiala spinifera fungus in removal of DBT. The effect of various concentrations of surfactant Tween80 on the growth of the fungus and DBT utilization was studied. Results: Exophiala spinifera was able to remove 100% DBT after 7 days of incubation at 30 ° C and 180 rpm shaking. The effect of different concentrations of surfactant Tween80 on growth and DBT utilization by this fungus was examined and it was observed that the presence of surfactant in the culture medium increased the growth and removal of DBT, therefore the amount of DBT utilized with 0.4% concentration of the surfactant was about 30% more than that utilized without surfactant. However, higher concentrations of surfactant Tween80 decreased the growth and consumption of DBT by fungi. Discussion and conclusion: Exophiala spinifera was isolated from oil contaminated soil and able to utilize toxic compound DBT as a sulfur source in the presence of other carbon sources such as glucose. So this isolated strain could be a good candidate for the petroleum desulfurization and it is the first report about desulfurization of DBT by fungus Exophiala spinifera. Growth and removal of DBT by fungus increased in the presence of surfactant Tween80. It can be concluded that the surfactant increases the total DBT transfer between the organic and aqueous phases and has a potential application in DBT bioremediation system by the studied fungus biocatalyst.

  6. Behavior of microemulsion systems of virgin coconut oil (VCO) using igepal CO-520 and tween 80 surfactant

    Science.gov (United States)

    Safuan, A.; Hamdan, S.; Laili, C. R.

    2017-09-01

    Virgin Coconut Oil (VCO) has been applied in many application and products. Formation of microemulsion region with surfactant was investigated by using phase diagram. The surfactants used are igepal CO-520 and tween 80. The studies showed that formation of microemulsion region were dependent on the behaviour of the surfactant toward VCO. The result showed that microemulsion regions were present in igepal CO-520 system formed a larger water-in-oil microemulsion region compared to tween 80 system. Certain weight ratios of VCO to surfactants were studied by using evaporation test in order to study the water loss of the microemulsion in ambient condition. The evaporation rate of samples was varies depending their compositon of VCO, surfactant and water.

  7. Influence of Sodium Lauryl Sulfate and Tween 80 on Carbamazepine–Nicotinamide Cocrystal Solubility and Dissolution Behaviour

    OpenAIRE

    Ke Wang; Ning Qiao; Mingzhong Li

    2013-01-01

    The influence of the surfactants of sodium lauryl sulfate (SLS) and Tween 80 on carbamazepine–nicotinamide (CBZ–NIC) cocrystal solubility and dissolution behaviour has been studied in this work. The solubility of the CBZ–NIC cocrystal was determined by measuring the eutectic concentrations of the drug and the coformer. Evolution of the intrinsic dissolution rate (IDR) of the CBZ–NIC cocrystal was monitored by the UV imaging dissolution system during dissolution. Experimental results indicated...

  8. Effect of Tween 80 on 9a-steroid hydroxylating activity and ultrastructural characteristics of Rhodococcus sp. cells

    OpenAIRE

    Avramova , Tatyana; Spassova , Dimitrina; Mutafov , Sava; Momchilova , Svetlana; Boyadjieva , Lilyana; Damyanova , Boryana; Angelova , Blaga

    2010-01-01

    International audience; Studied is the effect of the non-ionic surfactant Tween 80 on the microbial transformation of 4-androstene- 3,17-dione into its 9a-hydroxy-derivative by resting Rhodococcus sp. cells. The surfactant was applied in the cultivation medium as an additional source of carbon, in the transformation reaction medium as a mediator of the steroid substrate solubility or was used for permeabilization of the glucose grown Rhodococcus sp. cells. Special attention is paid to the fac...

  9. Effect of nonionic compound emulsifiers Tween80 and Span80 on the properties of microencapsulated phase change materials.

    Science.gov (United States)

    Zhan, Shiping; Zhou, Zhiyi; Wang, Weijing; Zhao, Qicheng; Hou, Weimin

    2014-01-01

    In this article, the nonionic compound emulsifiers Tween80 and Span80 were used to prepare microcapsules containing phase change materials (microPCMs) with melamine-formaldehyde (MF) shells by in situ polymerization method. The effects of compound emulsifiers Tween80 and Span80 on the structure, morphologies and properties of microPCMs containing paraffin were studied. SEM morphological investigation suggests that a complex of Tween80 and Span80 as emulsifiers are optimal for the fabrication of microPCMs in this study compared to Tween60 or OP-10. The diameter distributions of microPCMs synthesized with different amounts of compound emulsifiers are uniform, whereas compound emulsifiers' amount affect the mean diameter of microPCMs decreasing from 5.34 to 3.05 µm. These microPCMs with the core/shell weight ratio 3/1 have smoother surface and a higher core content of 68.7% than other core/shell ratio. Anti-osmosis measurements indicate that microPCMs have good compactness and stable performance compared to those synthesized by one type of emulsifier.

  10. Morphological identification of Candida species on glucose agar, rice extract agar and corn meal agar with and without Tween-80.

    Science.gov (United States)

    Joshi, K R; Solanki, A; Prakash, P

    1993-01-01

    A comparative study for the identification of 32 known strains of Candida species on the basis of morphology on glucose agar, rice extract agar and corn meal agar with and without Tween 80 revealed that when Tween 80 is incorporated in the media identification is possible for 96.8% of the species within 48 hours on rice extract agar and for 96.8% of the species within 48 hours on rice extract agar and for 90.6% of the species on glucose agar. The germ tubes and chlamydospores were also produced more on rice extract agar than on 0.1% glucose agar. Rice extract agar with Tween 80 can be used as single medium for morphologic identification of Candida species. The inoculated medium is first incubated at 37 degrees C for 3 hours and examined for germ tube formation and then incubated at 25 degrees C for 24 to 72 hours and examined for appearance of chlamydospores and mycelial morphology.

  11. Enhanced cellulase hydrolysis of eucalyptus waste fibers from pulp mill by Tween80-assisted ferric chloride pretreatment.

    Science.gov (United States)

    Chen, Liheng; Fu, Shiyu

    2013-04-03

    Pretreatment combining FeCl3 and Tween80 was performed for cellulose-to-ethanol conversion of eucalyptus alkaline peroxide mechanical pulping waste fibers (EAWFs). The FeCl3 pretreatment alone showed a good effect on the enzymatic hydrolysis of EAWFs, but inhibited enzyme activity to some extent. A surfactant, Tween80, added during FeCl3 pretreatment was shown to significantly enhance enzyme reaction by eluting enzymatic inhibitors such as iron(III) that are present at the surface of the pretreated biomass. Treatment temperature, liquid-solid ratio, treatment time, FeCl3 concentration, and Tween80 dosage for pretreatment were optimized as follows: 180 °C, 8:1, 30 min, 0.15 mol/L, and 1% (w/v). Pretreated EAWFs under such optimal conditions provided enzymatic glucose (based on 100 g of oven-dried feedstock) and substrate enzymatic digestibility of EAWFs of 34.8 g and 91.3% after 72 h of enzymatic hydrolysis, respectively, with an initial cellulase loading of 20 FPU/g substrate.

  12. Colloidal Characteristics of Water Systems of Rhamnolipid Biocomplex of Strain Pseudomonas sp. PS-17 with Tween-80 and their Prospects for Biotechnology

    Directory of Open Access Journals (Sweden)

    Elena V. Karpenko

    2017-12-01

    Conclusions. The peculiarities of colloid-chemical characteristics of RBC and Tween-80 systems are determined, the prospects of their use for increasing efficiency of emulsification and sunflower growth stimulation are determined.

  13. Development of span 80-tween 80 based fluid-filled organogels as a matrix for drug delivery

    Directory of Open Access Journals (Sweden)

    Charulata Bhattacharya

    2012-01-01

    Full Text Available Background: Organogels are defined as 3-dimensional networked structures which immobilize apolar solvents within them. These gelled formulations are gaining importance because of their ease of preparation and inherent stability with improved shelf life as compared to the ointments. Aim: Development of span 80-tween 80 mixture based organogels for the first time by fluid-filled fiber mechanism. Materials and Methods: Span 80 and tween 80 were used as surfactant and co-surfactant, respectively. The surfactant mixtures were dissolved in oil followed by the addition of water which led to the formation of organogels at specific compositions. The formulations were analyzed by microscopy, X-ray diffraction (XRD, time-dependent stability test and accelerated thermal stability test by thermocycling method. Ciprofloxacin, a fourth-generation fluoroquinolone, was incorporated within the organogels. The antimicrobial activity of the drug loaded organogels and in vitro drug release from the gels was also determined. Results and Conclusions: Microscopic results indicated that the gels contained clusters of water-filled spherical structures. XRD study indicated the amorphous nature of the organogels. The release of the drug was found to be diffusion controlled and showed marked antimicrobial property. In short, the prepared organogels were found to be stable enough to be used as pharmaceutical formulation.

  14. Pharmacokinetics study of ferulic acid in rats after oral administration of γ-oryzanol under combined use of Tween 80 by LC/MS/MS.

    Science.gov (United States)

    Pan, Y; Cai, L; He, S; Zhang, Z

    2014-01-01

    γ-oryzanol (OZ) is a rich source of commercially-important bioactive phytochemicals, most of them of interest in nutrition, pharmacy and cosmetics. However, the poor solubility of OZ limited the use. In the paper, ultraviolet-visible (UV-Vis) analysis was conducted to analysis the solubilization of OZ under combined use of Tween 80 in vitro. In addition, to further confirm the solubilizing effect of Tween 80, a pharmacokinetic study of ferulic acid (FA) in rats after oral administration of OZ 100 mg/kg under combined use of Tween 80 though LCMS/MS was carried out. Solubility enhancement as high as 100-fold is achieved using 1% Tween 80 in vitro. Following oral administration of OZ-Tween 80 100 mg/kg, the values of Tmax, Cmax, AUC0-∞, T1/2Ka and MRT0-∞ were 46.667 ± 39.328, 129.498 ± 27.025, 63738.28 ± 599, 14.274 ± 7.309 and 859.592 ± 108.780 respectively. The values of T1/2Ka, AUC0-∞, MRT0-t, and Tmax showed up to increase 16%, 58%, 44% and 47% while Cmax and CL/F decreased 22% and 12%, respectively. The decreased Cmax value indicated that Tween 80 can hardly enhance the absorption of FA in rats. However, T1/2Ka and Tmax values showed that the absorption of FA was extended, which resulted the increased values of AUC0-∞ and MRT0-∞. Our results reveal that Tween 80 improves solubility of OZ in vitro and could enhance the bioavailability of OZ by extending its absorption and elimination.

  15. Steam-exploded biomass saccharification is predominately affected by lignocellulose porosity and largely enhanced by Tween-80 in Miscanthus.

    Science.gov (United States)

    Sun, Dan; Alam, Aftab; Tu, Yuanyuan; Zhou, Shiguang; Wang, Yanting; Xia, Tao; Huang, Jiangfeng; Li, Ying; Zahoor; Wei, Xiaoyang; Hao, Bo; Peng, Liangcai

    2017-09-01

    In this study, total ten Miscanthus accessions exhibited diverse cell wall compositions, leading to largely varied hexoses yields at 17%-40% (% cellulose) released from direct enzymatic hydrolysis of steam-exploded (SE) residues. Further supplied with 2% Tween-80 into the enzymatic digestion, the Mis7 accession showed the higher hexose yield by 14.8-fold than that of raw material, whereas the Mis10 had the highest hexoses yield at 77% among ten Miscanthus accessions. Significantly, this study identified four wall polymer features that negatively affect biomass saccharification as pbiomass enzymatic digestion. Hence, this study provides the potential strategy to enhance biomass saccharification using optimal biomass process technology and related genetic breeding in Miscanthus and beyond. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Effect of Sodium Dodecyl Sulfate (SDS) and Tween 80 on Cell Viability in an Air-Cathode Microbial Fuel Cell

    KAUST Repository

    Fregoso, Luisa

    2011-07-01

    Microbial fuel cells (MFCs) generate current via electrochemical reactions produced by bacteria attached to the anode that oxidize organic matter. Due to their high volume use in household products, some concentration of surfactant will reach wastewater treatment plants. The average surfactant concentration in wastewater ranges from 10 to 20 mg L-1, and up to 300 mg L-1, for domestic and industrial wastewaters, respectively. This study aimed to demonstrate the feasibility of enhancing power production by adding Tween 80 and SDS surfactants to air-cathode MFCs, and their effect in cell viability at the anodic biofilm. In order to analyze the effect of anionic and nonionic surfactants in MFCs performance, eight MFCs were spiked with two types of surfactants, the anionic surfactant sodium dodecyl sulfate (SDS) and the nonionic surfactant Tween® 80 at two different concentrations 10 and 100 mg L-1. Cell viability at the anodic biofilms was examined using the LIVE/DEAD BacLight viability assay and images were visualized with a confocal laser scanning microscope. The electrochemical results demonstrate that, for an air-cathode MFC operating on 1 g L-1 acetate in a fed-batch mode, reactors where SDS was added show a lower overall performance, maximum PD of 544 mW m-2, CE of 12.3%, Rint of 322 Ω (10 mg L-1) and maximum PD of 265 mW m-2, CE of 9.4%, Rint of 758 Ω (100 mg L-1). Reactors where Tween 80 was added show quite stable performance, maximum PD of 623 mW m-2, CE of 15.4%, Rint of 216 Ω (10 mg L-1) and maximum PD of 591 mW m-2, CE of 10.8%, Rint of 279 Ω (100 mg L-1), compared with reactors operating at only acetate as a substrate, maximum PD of 574 mW m-2. Confocal microscopy images confirm this observation and biofilm viability appeared severely compromised in SDS reactors, especially at high concentrations. This study has opened up a whole new research area in determining which types of surfactants are toxic to the anodic biofilm and to further investigate the

  17. Preparation and physicochemical evaluation of emulsified virgin coconut oil (VCO)-carica papaya extract concoction using Tween80

    Science.gov (United States)

    Omar, Hazreen; Zubairi, Saiful Irwan; Fadhilah, Mohd Faizulhelmi; Omar, Dzolkhifli; Asib, Norhayu

    2016-11-01

    Carica papaya is a member of the Caricaceae. Its leaves have been used in folk medicine for centuries. Recent studies have shown its beneficial effects as an anti-inflammatory agent (Owoyele et al 2008) and anti-tumour15 as well as antioxidant and wound healing properties7. The study has shown that the effect of carica papaya leaves juice intake also can accelerate the rate of increase in platelet count among the patients infected with dengue fever and dengue haemorrhagic fever18. With all the goodness of carica papaya leaves, a formulation with addition of virgin coconut oil (VCO) is produced to give an enhanced supplement beverage to market nowadays. Virgin coconut oil is well known as anti-oxidant4. The combination of these two substances gives a balance combination in healthy supplement. In recent years the application of emulsion is rapidly increasing in many fields such as cosmetics and paints. Emulsions are dispersions of droplets of one liquid in another, immiscible, liquid in which the droplets are of colloidal or near-colloidal sizes. The combination of water and oil (VCO) with addition of non-ionic surfactant Tween80 was constructed using ternary phase diagram. By considering the Hydrophilic-Lipophilic Balance (HLB) value of each substance will help in producing a stable emulsion.

  18. Effects of miglyol 812 on rats after 4 weeks of gavage as compared with methylcellulose/tween 80.

    Science.gov (United States)

    Sellers, Rani S; Antman, M; Phillips, J; Khan, K N; Furst, S M

    2005-01-01

    Miglyol 812 is a medium-chain triglyceride used in toxicology studies as an excipient to improve test compound solubility/absorption. As part of a larger toxicology study, 15 Wistar Han IGS rats/sex/group were dosed by oral gavage for 4 weeks with 10 mL kg(-1) day(-1) of 100% Miglyol 812 or 0.5% methylcellulose/0.1% Tween 80 in water (MC-T) followed by 4 weeks without treatment to evaluate the potential effects of this excipient in long-term toxicology studies relative to a traditional excipient such as MC-T. Clinical signs evident during the dosing phase included soft and/or mucoid stool in 12/15 males and 11/15 females treated with Miglyol 812 but in no animals treated with MC-T. Animals treated with Miglyol 812 had a 6-7% statistically significant reduction in body weight gain as compared to MC-T-treated animals. Statistically significant changes in clinical chemistry parameters as compared to MC-T included decreased blood urea nitrogen (50% and 29% in males and females, respectively), increased cholesterol (1.6-fold and 1.5-fold in males and females, respectively), decreased total protein (6% and 8% in males and females, respectively), decreased globulins (15% and 11% in males and females, respectively), and increased triglycerides (2.8-fold and 1.7-fold in males and females, respectively). Absolute and relative thymic weights decreased 28% and 24%, respectively, in males, and 18% and 17%, respectively, in females without histological alterations. Histopathology revealed increased alveolar histiocytosis with focal interstitial inflammation in lungs in 5/10 males and 7/10 females treated with Miglyol 812 compared to only 1/10 males and 1/10 females treated with MC-T. All effects were reversible during the recovery period. Results of this study indicate that 100% miglyol 812 produces reversible gastrointestinal effects and decreases in body weight gains along with changes in several serum chemistry parameters. Therefore, it should not be considered innocuous when

  19. Conductometric study of sodium dodecyl sulfate - nonionic surfactant (Triton X-100, Tween 20, Tween 60, Tween 80 or Tween 85 mixed micelles in aqueous solution

    Directory of Open Access Journals (Sweden)

    Ćirin Dejan M.

    2012-01-01

    Full Text Available The present study is concerned with the determination of the critical micelle concentration (cmc of mixed micelles of sodium dodecyl sulfate with one of five nonionic surfactants (Triton X-100, Tween 20, Tween 60, Tween 80 or Tween 85 from conductance measurements. Based on the calculated values of the β parameters we have noticed that SDS-nonionic surfactants mostly showed strong synergistic effect. It was found that nonionic surfactants with mainly longer and more hydrophobic tail show stronger interactions with hydrophobic part of SDS, thus expressing stronger synergism. In SDS-Tween 80 binary system the strongest synergistic effect was noticed. SDS-Tween 85 micellar system showed antagonistic effect, most probably because the presence of the double bond in its three hydrophobic tails (three C18 tails makes it sterically rigid.

  20. Mutagenicity of Tween 80-solvated mild gasification products in the Ames salmonella microsomal assay system. [Quarterly report, October--December 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-13

    The results of the Tween 80-solvated Ames testing of six mild gasification samples indicate significant mutagenic activity only in the composite materials (MG-119 and MG-120), previously suspected from the DMSO-solvated assays, which had shown some variable but ultimately insignificant mutagenic responses. The activity of these samples from the Tween 80-solvated assays was quite low when compared to either the positive controls or the SRC-II HD coal-liquefaction reference material. The class of mutagenic activity expressed by these samples solvated in Tween 80 was that of an indirect-acting, frameshift mutagen(s) since significant activity was found only on tester strain TA98 in the presence of the metabolic activation fraction (S9). Because DMSO and other solvents have been shown to affect the mutagenic activity of certain pure chemicals, the possibility of solvent/mutagen interactions in complex mixtures such as coal-derived liquids exists. Thus, the testing of the genotoxic activity of undefined, chemically complex compounds may require the use of at least two solvent systems to reduce the possibility of artifactual findings. 10 refs., 4 tabs.

  1. A cytochemical study of acid carbohydrates on the surface of Candida lipolytica grown in tween 80-containing medium Estudo citoquímico dos carboidratos ácidos na superfície de Candida lipolytica crescida em meio contendo tween 80

    Directory of Open Access Journals (Sweden)

    Aline E. Nascimento

    2000-03-01

    Full Text Available Carbohydrate-containing molecules were located on the surface of Candida lipolytica by using ruthenium red in a cytochemical study. The yeast was grown in media containing Tween 80. The surfactant, at 1.0% and 0.5%, was added to the culture medium in different intervals of time, correspondent to the beginning of exponential growth phase, mid of logarithimic phase and beginning of stationary growth phase. Control cultures were grown in a medium containing glucose. The growth of the yeast in media containing glucose and Tween 80 induced changes in the pattern of distribution and location of acid polyssacharides in the cell wall of the microorganism. In adition, the pattern also changed according to Tween 80 concentration. The influence of Tween 80 on cellular carbohydrate expression is discussed.Moléculas contendo resíduos de açúcares foram localizadas sobre a superfície de Candida lipolytica utilizando-se o vermelho de rutênio como marcador citoquímico. A levedura foi semeada em meio contendo Tween 80. O surfactante, nas concentrações de 1,0% e 0,5%, foi adicionado ao meio de cultivo em diferentes intervalos de tempo, correspondentes ao início da fase exponencial de crescimento, meio da fase logarítmica e final da fase exponencial de crescimento, Culturas-controles foram cultivadas em meio contendo glicose como fonte de carbono. O crescimento da levedura em meios contendo glicose ou Tween 80 induziu o surgimento de alterações na distribuição e na localização de polissacarídeos ácidos na parede celular do organismo. Células crescidas em glicose ou Tween 80 exibiram variações citoquímicas em função de sua fase de crescimento. Adicionalmente, o padrão de marcação citoquímica também sofreu variações de acordo com a concentração do surfactante. A influência do surfactante na expressão de carboidratos é discutida.

  2. 78 FR 46260 - Sorbitan Monooleate Ethylene Oxide Adduct; Exemption From the Requirement of a Tolerance

    Science.gov (United States)

    2013-07-31

    ... not a dermal sensitizer in guinea pigs. Acute dermal toxicity was not observed in rabbits exposed to... them. Potentially affected entities may include: Crop production (NAICS code 111). Animal production...

  3. In vitro investigation on the impact of the surface-active excipients Cremophor EL, Tween 80 and Solutol HS 15 on the metabolism of midazolam.

    Science.gov (United States)

    Bravo González, Roberto C; Huwyler, Jörg; Boess, Franziska; Walter, Isabelle; Bittner, Beate

    2004-01-01

    The impact of the surface-active formulation ingredients Cremophor EL, Tween 80 and Solutol HS 15 on the intrinsic clearance (Clint) of midazolam (MDZ) was investigated in rat hepatocytes and microsomes. In rat hepatocytes with 0.003%, 0.03% and 0.3% (w/v) Solutol HS 15 already present in the incubation medium, the Clint was significantly reduced in a dose-dependent manner by about 25%, 30% and 50%, respectively. In the presence of Cremophor EL and Tween 80 a significant reduction in Clint by about 30% and 25%, respectively, was observed at 0.03% surfactant concentration. At 0.3% of Cremophor EL and Tween 80, Clint was reduced by about 50% and 20%, respectively. A reduction in Clint was also observed in experiments with rat liver microsomes. At surfactant concentrations up to 0.03%, cytotoxicity assays (lactate dehydrogenase release, adenosine triphosphate content) as well as light microscope investigations did not reveal any cytotoxic impact of the surfactants on the hepatocyte monolayer. A potential interaction of the surfactants with biological membranes was determined using phosphatidylcholine-cholesterol liposomes loaded with self-quenching concentrations of carboxyfluorescein. No marked release of carboxyfluorescein from the liposomes (that would be an indication for a surfactant-dependent disruption of membrane integrity) was observed up to concentrations of 0.03% of the different surfactants. It is concluded that cytochrome P450 3A mediated metabolism of MDZ seems to be prevented by all surfactants at concentrations above 0.03%. In our experiments the surfactants did not show toxic effects at concentrations that resulted in a decreased Clint of MDZ. Thus, a direct inhibition of the metabolizing enzymes, a molecular interaction with the microsomes as well as an alteration of membrane properties that did not yet result in a release of LDH have to be taken into consideration as reasons for the observed changes in the metabolism of MDZ. Copyright 2004 John

  4. Stealth lipid polymer hybrid nanoparticles loaded with rutin for effective brain delivery - comparative study with the gold standard (Tween 80): optimization, characterization and biodistribution.

    Science.gov (United States)

    Ishak, Rania A H; Mostafa, Nada M; Kamel, Amany O

    2017-11-01

    The blood-brain barrier is considered the leading physiological obstacle hindering the transport of neurotherapeutics to brain cells. The application of nanotechnology coupled with surfactant coating is one of the efficacious tactics overcoming this barrier. The aim of this study was to develop lipid polymer hybrid nanoparticles (LPHNPs), composed of a polymeric core and a phospholipid shell entangled, for the first time, with PEG-based surfactants (SAA) viz. TPGS or Solutol HS 15 in comparison with the gold standard Tween 80, aiming to enhance brain delivery and escape opsonization. LPHNPs were successfully prepared using modified single-step nanoprecipitation technique, loaded with the flavonoid rutin (RU), extracted from the flowers of Calendula officinalis L., and recently proved as a promising anti-Alzheimer. The effect of the critical process parameters (CPP) viz. PLGA amount, W lecithin /W PLGA ratio, and Tween 80 concentration on critical quality attributes (CQA); entrapment, size and size distribution, was statistically analyzed via design of experiments, and optimized using the desirability function. The optimized CPP were maintained while substituting Tween 80 with other PEG-SAA. All hybrid particles exhibited spherical shape with perceptible lipid shells. The biocompatibility of the prepared NPs was confirmed by hemolysis test. The pharmacokinetic assessments, post-intravenous administration to rats, revealed a significant higher RU bioavailability for NPs relative to drug solution. Biodistribution studies proved non-significant differences in RU accumulation within brain, but altered phagocytic uptake among various LPHNPs. The present study endorses the successful development of LPHNPs using PEG-SAA, and confirms the prospective applicability of TPGS and Solutol in enhancing brain delivery.

  5. Studi perbandingan biosurfaktan Pseudomonas aeruginosa IA7d dan surfaktan sintetik Tween-80 dalam biodegradasi solar oleh mikroba perairan Pelabuhan Tanjung Perak Surabaya

    Directory of Open Access Journals (Sweden)

    Ni’matuzahroh Ni’matuzahroh

    2012-02-01

    Full Text Available This research aimed to know the influence of addition crude product Pseudomonas aeruginosa IA7d biosurfactant from substrate hexadecane and diesel fuel in supporting activity of diesel fuel biodegradation and both potention to replace synthetic surfactant for hydrocarbon remediation. Biodegradation test was done by experimental in laboratory scale by Tween-80 as synthetic surfactant comparator. Growth culture was from seawater of Tanjung Perak Harbor Surabaya include various microbe types in its. 2% ( w/v of diesel fuel and three surfactants test (0.70% w/v crude product P. aeruginosa IA7d biosurfactant from hexadecane substrate; 60,69% w/v crude product P. aeruginosa IA7d biosurfactant from diesel fuel substrate; and 0.10% w/v synthetic surfactant Tween-80 at uniform surface tension of surfactant solution (54.03 mN/m were added into 30 ml seawater sample. Cultures were incubated at room temperature (30 °C during 14 days with shaking (90 rpm. Result of biodegradation test showed the third addition of surfactants test had an effect on acceleration of diesel fuel biodegradation activity that proved at the increased of microbial count (bacterium, yeast, and mould and decreased of diesel fuel concentration was shown by chromatograms area of diesel fuel. Highest degradation was successively reached by culture got crude product P. aeruginosa IA7d biosurfactant from diesel fuel substrate (88.034%, crude product P. aeruginosa IA7d biosurfactant from hexadecane substrate (80.908%, synthetic surfactant Tween-80 (54.732%, and control that was without addition surfactant test (0.132%. Base on number of microbial count, percentage of decreasing chromatogram peaks of diesel fuel from each surfactant test, and price substrate produce (diesel fuel and hexadecane among both crude product P. aeruginosa IA7d biosurfactant, known that the crude product P. aeruginosa IA7d biosurfactant from diesel fuel substrate had highest ability acceleration to biodegradation

  6. Inactivation of Escherichia coli O157:H7 in vitro and on the surface of spinach leaves by biobased surfactants

    Science.gov (United States)

    This study was conducted to evaluate the effect of biosurfactants on the populations of Escherichia coli O157:H7 in suspension and on spinach leaves. Eight surfactants including four soybean oil-based biosurfactants, sodium dodecyl sulfate (SDS), polyoxyethylene sorbitan monooleate (Tween 80), sopho...

  7. Development and validation of in silico models for estimating drug preformulation risk in PEG400/water and Tween80/water systems.

    Science.gov (United States)

    Crivori, Patrizia; Morelli, Amedea; Pezzetta, Daniele; Rocchetti, Maurizio; Poggesi, Italo

    2007-11-01

    Solubility is one of the most important properties of drug candidates for achieving the targeted plasma concentrations following oral dosing. Furthermore, the formulations adopted in the in vivo preclinical studies, for both oral and intravenous administrations, are usually solutions. To formulate compounds sparingly soluble in water, pharmaceutically acceptable cosolvents or surfactants are typically employed to increase solubility. Compounds poorly soluble also in these systems will likely show severe formulation issues. In such cases, relatively high amount of compounds, rarely available in the early preclinical phases, are needed to identify the most appropriate dosing vehicles. Hence, the purpose of this study was to build two computational models which, on the basis of the molecular structure, are able to predict the compound solubility in two vehicle systems (40% PEG400/water and 10% Tween80/water) used in our company as screening tools for anticipating potential formulation issues. The two models were developed using the solubility data obtained from the analysis of approximately 2000 chemically diverse compounds. The structural diversity and the drug-like space covered by these molecules were investigated using the ChemGPS methodology. The compounds were classified (high/low preformulation risk) based on the experimental solubility value range. A combination of descriptors (i.e. logD at two different pH, E-state indices and other 2D structural descriptors) was correlated to these classes using partial least squares discriminant (PLSD) analysis. The overall accuracy of each PLSD model applied to independent sets of compounds was approximately 78%. The accuracy reached when the models were used in combination to identify molecules with low preformulation risk in both systems was 83%. The models appeared a valuable tool for predicting the preformulation risk of drug candidates and consequently for identifying the most appropriate dosing vehicles to be further

  8. Hidrofilicidade de filmes de amido/poli(butileno adipato co-tereftalato (Pbat adicionados de tween 80 e óleo de soja Hydrophilicity of starch and poly(butylene adipate-co-terephthalate (Pbat films containing tween 80 and soybean oil

    Directory of Open Access Journals (Sweden)

    Renata P. Herrera Brandelero

    2013-01-01

    Full Text Available A incorporação de amido ao polímero poli (butilenoadipatoco-tereftalato (PBAT através de blendas com alto teor de amido pode ser uma alternativa para obter embalagens biodegradáveis, minimizar custos e o uso de recursos não renováveis. No entanto, a adição de amido aumenta a permeabilidade ao vapor de água (PVA. A incorporação em filmes com amido de substâncias como óleos vegetais e surfactantes pode diminuir a hidrofilicidade, favorecendo as aplicações destes como embalagens. A hidrofilicidade dos filmes elaborados por blendas de amido/PBAT adicionados de óleo de soja (OS e tween 80 (TW foi avaliada considerando o efeito do OS e TW nas isotermas de sorção dos filmes, na PVA e nos coeficientes de difusão (Dw e solubilidade (β do vapor de água. Filmes com OS com ou sem TW apresentaram menor quantidade de água de sorção, sendo os filmes com menores quantidades de OS e sem TW menos hidrofílicos e menos permeáveis aos vapores de água. A adição de OS reduziu os valores de β e Dw dos filmes de amido/PBAT. O efeito foi relacionado com o aumento das porções hidrofóbicas e da compatibilidade entre o amido e PBAT na presença de OS.Incorporating starch into the poly(butylene adipate-co-terephthalate (PBAT polymer by means of blends with high starch contents is a possible option for producing biodegradable packaging using renewable resources and reducing costs. However, the addition of starch increases the water vapour permeability (WVP. The incorporation of substances as lipids and surfactants can reduce the hydrophilicity of films containing starch, favouring their use as packaging. The hydrophilicity of films produced from blends of starch/PBAT with added soybean oil (SO and tween 80 (TW was studied. The effects of these substances on the sorption isotherm, on the WVP and on the water vapour diffusion (Dw and solubility (β coefficients of the films were evaluated. The water sorption in films with SO, with or without TW

  9. Structuring edible oil with lecithin and sorbitan tri-stearate

    NARCIS (Netherlands)

    Pernetti, M.; Malssen, van K.; Kalnin, D.J.E.; Flöter, E.

    2007-01-01

    The gelation of edible oil by a mixture of lecithin and sorbitan tri-stearate (STS) was studied. The two components individually in oil do not give structure at concentrations between 6% and 20% w/w: viscous, pourable solutions are obtained. A synergetic effect is observed with their mixture, at

  10. Ultrasmall, water dispersible, TWEEN80 modified Yb:Er:NaGd(WO4)2 nanoparticles with record upconversion ratiometric thermal sensitivity and their internalization by mesenchymal stem cells

    Science.gov (United States)

    Cascales, Concepción; Paíno, Carlos L.; Bazán, Eulalia; Zaldo, Carlos

    2017-05-01

    This work presents the synthesis by coprecipitation of diamond shaped Yb:Er:NaGd(WO4)2 crystalline nanoparticles (NPs) with diagonal dimensions in the 5-7 nm × 10-12 nm range which have been modified with TWEEN80 for their dispersion in water, and their interaction with mesenchymal stem cells (MSCs) proposed as cellular NP vehicles. These NPs belong to a large family of tetragonal Yb:Er:NaT(XO4)2 (T = Y, La, Gd, Lu; X = Mo, W) compounds with green (2H11/2 + 4S3/2 → 4I15/2) Er-related upconversion (UC) efficiency comparable to that of Yb:Er:β-NaYF4 reference compound, but with a ratiometric thermal sensitivity (S) 2.5-3.5 times larger than that of the fluoride. At the temperature range of interest for biomedical applications (˜293-317 K/20-44 °C) S = 108-118 × 10-4 K-1 for 20 at%Yb:5 at%Er:NaGd(WO4)2 NPs, being the largest values so far reported using the 2H11/2/4S3/2 Er intensity ratiometric method. Cultured MSCs, incubated with these water NP emulsions, internalize and accumulate the NPs enclosed in endosomes/lysosomes. Incubations with up to 10 μg of NPs per ml of culture medium maintain cellular metabolism at 72 h. A thermal assisted excitation path is discussed as responsible for the UC behavior of Yb:Er:NaT(XO4)2 compounds.

  11. Reactivity to sorbitan sesquioleate affects reactivity to fragrance mix I.

    Science.gov (United States)

    Geier, Johannes; Schnuch, Axel; Lessmann, Holger; Uter, Wolfgang

    2015-11-01

    Fragrance mix I (FM I) and its single constituents contain 5% and 1% sorbitan sesquioleate (SSO), respectively. SSO is a rare sensitizer and a potential irritant. To determine whether the outcome of the FM I breakdown test is affected by positive patch test reactivity to SSO. A retrospective analysis of data from the Information Network of Departments of Dermatology, 1998-2013, was performed. The full FM I breakdown test including SSO was tested in 2952 patients. Of these, 154 (5.2%) had a positive patch test reaction to SSO 20% pet. and 2709 (91.8%) had a negative patch test reaction. Positive reactions to one or more of the single fragrances contained in the mix were significantly more common (82.5% versus 57.3%) in SSO-positive patients, who also had more multiple reactions than FM I-positive patients with negative SSO reactions (61.5% versus 21.3% patients with reactions to two or more fragrances). Our results indicate that reactivity to SSO markedly affects the outcome of patch testing with FM I and its single constituents. SSO must be an obligatory part of the full FM I breakdown test, and should ideally be included in the baseline series. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  12. Influence of Surfactant Sorbitan Monolaurate to Suspension Polymerization of Polyacrylic Acid Super absorbent

    International Nuclear Information System (INIS)

    Dewi Sondari; Nuri Astrini; Lik Anah; Agus Haryono

    2008-01-01

    A super absorbent polymer has been prepared by suspension polymerization reaction using acrylic acid, sodium hydroxide, cyclohexane, potassium persulfate as initiator and sorbitan monolaurate as surfactant. The effect of different weight ratio of acrylic acid/sorbitan monolaurate 20/1, 20/2 and 20/3 were investigated based on its swelling properties, chemical structure by using Fourier Transform-Infra Red (FTIR) Spectroscopy and the surface morphology by scanning electron microscopy (SEM). The molecular weight of polyacrylic acid super absorbent was determinate by intrinsic viscosity measurements in 2 M aqueous sodium hydroxide at 25 o C. The study showed sample with weight ratio of acrylic acid/sorbitan monolaurate = 20/2 have best swelling properties. (author)

  13. Enzymatic synthesis of sorbitan esters using a low-boiling-point azeotrope as a reaction solvent.

    Science.gov (United States)

    Sarney, D B; Barnard, M J; Virto, M; Vulfson, E N

    1997-05-20

    Sorbitan esters were prepared by controlled dehydration of sorbitol followed by lipase-catalyzed esterification of the resulting "sorbitan." The reaction was carried out in azeotropic mixtures of tert-butanol/n-hexane. A partial phase diagram to determine the temperature required for the distillation of the azeotrope at a given ratio of the solvents was constructed. The effect of varying concentrations of the two solvents on the rate of esterification and the monoester/diester ratio of the final product was investigated in detail. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 54: 351-356, 1997.

  14. Bioremediation of Crude Oil Contaminated Desert Soil: Effect of Biostimulation, Bioaugmentation and Bioavailability in Biopile Treatment Systems.

    Science.gov (United States)

    Benyahia, Farid; Embaby, Ahmed Shams

    2016-02-15

    This work was aimed at evaluating the relative merits of bioaugmentation, biostimulation and surfactant-enhanced bioavailability of a desert soil contaminated by crude oil through biopile treatment. The results show that the desert soil required bioaugmentation and biostimulation for bioremediation of crude oil. The bioaugmented biopile system led to a total petroleum hydrocarbon (TPH) reduction of 77% over 156 days while the system with polyoxyethylene (20) sorbitan monooleate (Tween 80) gave a 56% decrease in TPH. The biostimulated system with indigenous micro-organisms gave 23% reduction in TPH. The control system gave 4% TPH reduction. The addition of Tween 80 led to a respiration rate that peaked in 48 days compared to 88 days for the bioaugmented system and respiration declined rapidly due to nitrogen depletion. The residual hydrocarbon in the biopile systems studied contained polyaromatics (PAH) in quantities that may be considered as hazardous. Nitrogen was found to be a limiting nutrient in desert soil bioremediation.

  15. SEPARATION OF T-MAZ ETHOXYLATED SORBITAN FATTY ACID ESTERS BY SUPERCRITICAL FLUID CHROMATOGRAPHY

    Science.gov (United States)

    The application of supercritical fluid chromatography (SFC) to the analysis of T-MAZ ethoxylated sorbitan fatty acid esters is described. FC separation methods utilize a density programming technique and a 50 um I.D. capillary column. his work demonstrates that capillary column S...

  16. Chitosan and Glyceryl Monooleate Nanostructures Containing Gemcitabine: Potential Delivery System for Pancreatic Cancer Treatment

    OpenAIRE

    Trickler, William J.; Khurana, Jatin; Nagvekar, Ankita A.; Dash, Alekha K.

    2010-01-01

    The objectives of this study are to enhance cellular accumulation of gemcitabine with chitosan/glyceryl monooleate (GMO) nanostructures, and to provide significant increase in cell death of human pancreatic cancer cells in vitro. The delivery system was prepared by a multiple emulsion solvent evaporation method. The nanostructure topography, size, and surface charge were determined by atomic force microscopy (AFM), and a zetameter. The cellular accumulation, cellular internalization and cytot...

  17. Polysorbates 20 and 80 used in the formulation of protein biotherapeutics: structure and degradation pathways.

    Science.gov (United States)

    Kerwin, Bruce A

    2008-08-01

    Polysorbates 20 and 80 (Tween 20 and Tween 80) are used in the formulation of biotherapeutic products for both preventing surface adsorption and as stabilizers against protein aggregation. The polysorbates are amphipathic, nonionic surfactants composed of fatty acid esters of polyoxyethylene sorbitan being polyoxyethylene sorbitan monolaurate for polysorbate 20 and polyoxyethylene sorbitan monooleate for polysorbate 80. The polysorbates used in the formulation of biopharmaceuticals are mixtures of different fatty acid esters with the monolaurate fraction of polysorbate 20 making up only 40-60% of the mixture and the monooleate fraction of polysorbate 80 making up >58% of the mixture. The polysorbates undergo autooxidation, cleavage at the ethylene oxide subunits and hydrolysis of the fatty acid ester bond. Autooxidation results in hydroperoxide formation, side-chain cleavage and eventually formation of short chain acids such as formic acid all of which could influence the stability of a biopharmaceutical product. Oxidation of the fatty acid moiety while well described in the literature has not been specifically investigated for polysorbate. This review focuses on the chemical structure of the polysorbates, factors influencing micelle formation and factors and excipients influencing stability and degradation of the polyoxyethylene and fatty acid ester linkages.

  18. Phase Behaviour Study of Swiftlet Nest Using Virgin Coconut Oil with Non-Ionic Surfactants

    International Nuclear Information System (INIS)

    Siti Salwa Abd Gani; Siti Zulaika Adisah; Siti Salwa Abd Gani

    2015-01-01

    Virgin coconut oil (VCO) is the oil that obtained from fresh and mature kernel of the coconut by mechanical or natural means with or without the application of heat, which does not lead to alteration of the nature of the oil. It have advantages such as strengthens the immune system because of its lauric acid content. It also has medium-chain fatty acids which heighten metabolism and energy, thus stimulating the thyroid. Swiftlet nest as an active ingredient need to be dispersed in a carrier system. Thus, ternary phase diagrams were constructed to find the suitable and stable system for it. The phase behavior of systems has been investigated by constructing ternary phase diagrams consisting of non-ionic surfactants/VCO:bird nest/water. The surfactants used were Sorbitan tri-oleate (Span 85), Sorbitan mono-oleate (Span 80), Sorbitan monolaurate (Span 20), Polyoxyethylene(20) sorbitan tri-oleate (Tween 85) and Polyoxyethylene (20) sorbitan mono-oleate (Tween 80). These systems include several phase regions such as homogeneous, isotropic, two-phase and three-phase regions. Different hydrophilic lipophilic balance (HLB) value of non-ionic surfactants exhibit different ternary diagram characteristics. A lower HLB shows a more oil-soluble and a more water-soluble surfactant (larger homogeneous and isotropic region in ternary phase diagrams) whereas high value of HLB shows the reverse of that result. The results show that the T85/VCO:bird nest/water system gave better performance than the other four individual surfactant systems. As a conclusion, high hydrophilic lipophilic balance (HLB) values of surfactant were found to be a good surfactant for the formulation of VCO:bird nest emulsion for cosmetic and pharmaceutical purposes. (author)

  19. Effect of polyoxyethylene sorbitan esters and sodium caseinate on physicochemical properties of palm-based functional lipid nanodispersions.

    Science.gov (United States)

    Cheong, Jean Ne; Mirhosseini, Hamed; Tan, Chin Ping

    2010-06-01

    The main objective of the present study was to investigate the effect of polyoxyethylene sorbitan esters and sodium caseinate on physicochemical properties of palm-based functional lipid nanodispersions prepared by the emulsification-evaporation technique. The results indicated that the average droplet size increased significantly (P sodium caseinate-stabilized nanodispersions containing carotenoids had the largest average droplet size (386 nm), thus indicating a greater emulsifying role for Polysorbate 20 compared with sodium caseinate.

  20. Lyotropic Liquid Crystalline Nanoparticles of Amphotericin B: Implication of Phytantriol and Glyceryl Monooleate on Bioavailability Enhancement.

    Science.gov (United States)

    Jain, Sanyog; Yadav, Pooja; Swami, Rajan; Swarnakar, Nitin Kumar; Kushwah, Varun; Katiyar, Sameer S

    2018-05-01

    Implication of different dietary specific lipids such as phytantriol (PT) and glyceryl monooleate (GMO) on enhancing the oral bioavailability of amphotericin B (AmB) was examined. Liquid crystalline nanoparticles (LCNPs) were prepared using hydrotrope method, followed by in vitro characterization, Caco-2 cell monolayer uptake, and in vivo pharmacokinetic and toxicity evaluation. Optimized AmB-LCNPs displayed small particle size (< 210 nm) with a narrow distribution (~ 0.2), sustained drug release and high gastrointestinal stability, and reduced hemolytic toxicity. PLCNPs presented slower release, i.e., ~ 80% as compared to ~ 90% release in case of GLCNPs after 120 h. Significantly higher uptake in Caco-2 monolayer substantiated the role of LCNPs in increasing the intestinal permeability followed by increased drug titer in plasma. Pharmacokinetic studies demonstrated potential of PT in enhancing the bioavailability (approximately sixfold) w.r.t. of its native counterpart with reduced nephrotoxicity as presented by reduced nephrotoxicity biomarkers and histology studies. These studies established usefulness of PLCNPs over GLCNPs and plain drug. It can be concluded that acid-resistant lipid, PT, can be utilized efficiently as an alternate lipid for the preparation of LCNPs to enhance bioavailability and to reduce nephrotoxicity of the drug as compared to other frequently used lipid, i.e., GMO.

  1. Rheology of oleogels based on sorbitan and glyceryl monostearates and vegetable oils for lubricating applications

    Directory of Open Access Journals (Sweden)

    Sánchez, R.

    2011-09-01

    Full Text Available Oleogels based on sorbitan and glyceryl monostearates and different types of vegetable oils, potentially applicable as biodegradable alternatives to traditional lubricating greases, have been studied. In particular, the rheological behavior, by means of small-amplitude oscillatory shear (SAOS measurements, and some lubrication performance-related properties (mechanical stability and tribological response have been evaluated in this work. SAOS response and mechanical stability of these oleogels are significantly influenced by the type and concentration of the organogelator and the vegetable oil used in the formulations. Glyceryl monostearate (GMS generally produces stronger gels than sorbitan monostearate (SMS. The use of low-viscosity oils, such as rapeseed and soybean oils, yields gels with significantly higher values of the linear viscoelastic functions than oleogels prepared with high-viscosity oils, i.e. castor oil. The rheological behavior of SMS-based oleogels also depends on the cooling rate applied during the gelification process. On the other hand, the oleogels studied present low values of the friction coefficient obtained in a tribological contact, although only some GMS/castor oil-based oleogels exhibit a suitable mechanical stability.

    En el presente trabajo se han estudiado diferentes oleogeles, basados en monoestearatos de sorbitano y glicerilo y aceites vegetales, que podrían ser potencialmente empleados como alternativas biodegradables a las grasas lubricantes tradicionales. En concreto, se ha evaluado su comportamiento reológico, a través de ensayos en cizalla oscilatoria, y algunas propiedades relacionadas con su rendimiento en la lubricación, tales como su estabilidad mecánica y comportamiento tribológico. La respuesta reológica y la estabilidad mecánica de los oleogeles estudiados están significativamente influenciadas por el tipo y la concentración del agente gelificante y por el aceite vegetal empleado. As

  2. A quantitative assessment method for Ascaris eggs on hands

    DEFF Research Database (Denmark)

    Jeandron, Aurelie; Ensink, Jeroen H. J.; Thamsborg, Stig Milan

    2014-01-01

    The importance of hands in the transmission of soil transmitted helminths, especially Ascaris and Trichuris infections, is under-researched. This is partly because of the absence of a reliable method to quantify the number of eggs on hands. Therefore, the aim of this study was to develop a method...... to assess the number of Ascaris eggs on hands and determine the egg recovery rate of the method. Under laboratory conditions, hands were seeded with a known number of Ascaris eggs, air dried and washed in a plastic bag retaining the washing water, in order to determine recovery rates of eggs for four...... different detergents (cationic [benzethonium chloride 0.1% and cetylpyridinium chloride CPC 0.1%], anionic [7X 1% - quadrafos, glycol ether, and dioctyl sulfoccinate sodium salt] and non-ionic [Tween80 0.1% -polyethylene glycol sorbitan monooleate]) and two egg detection methods (McMaster technique...

  3. Synthesis and characterization of silver-copper core-shell nanoparticles using polyol method for antimicrobial agent

    Science.gov (United States)

    Hikmah, N.; Idrus, N. F.; Jai, J.; Hadi, A.

    2016-06-01

    Silver and copper nanoparticles are well-known as the good antimicrobial agent. The nano-size of particles influences in enhancing the antimicrobial activity. This paper discusses the effect of molarity on the microstructure and morphology of silver-copper core-shell nanoparticles prepared by a polyol method. In this study, silver-copper nanoparticles are synthesized through the green approach of polyol method using ethylene glycol (EG) as green solvent and reductant, and polyoxyethylene-(80)-sorbitan monooleate (Tween 80) as a nontoxic stabilizer. The phase and morphology of silver-copper nanoparticles are characterized by X-ray diffraction (XRD) and Field emission scanning electron microscope (FESEM) and Transmission electron microscope (TEM). The results XRD confirm the pure crystalline of silver and copper nanoparticles with face-centered cubic (FCC) structure. FESEM and TEM analysis confirm the existence of Ag and Cu nanoparticles in core-shell shape.

  4. Fabrication and Properties of Micro-Nanoencapsulated Phase Change Materials for Internally-Cooled Liquid Desiccant Dehumidification.

    Science.gov (United States)

    Niu, Xiaofeng; Xu, Qing; Zhang, Yi; Zhang, Yue; Yan, Yufeng; Liu, Tao

    2017-04-29

    Micro-nanoencapsulated phase change materials (M-NEPCMs) are proposed to be useful in liquid desiccant dehumidification by restraining the temperature rise in the moisture-removal process and improving the dehumidification efficiency. In this paper, the n -octadecane M-NEPCMs with desirable thermal properties for internally-cooled dehumidification were fabricated by using compound emulsifiers through the in-situ polymerization method. Melamine-formaldehyde resin was used as the shell material. The effects of the mixing ratio, emulsification methods and amount of the compound emulsifiers on the morphology, size and thermal properties of the M-NEPCMs were investigated experimentally. The optimum weight mixing ratio of the compound emulsifiers is SDS (sodium dodecyl sulfate):Tween80 (polyoxyethylene sorbitan monooleate):Span80 (sorbitan monooleate) = 0.1:0.6:0.3, which achieves the best stability of the n -octadecane emulsion. When the compound emulsifiers are 10 wt. % of the core material, the melting enthalpy of M-NEPCMs reaches its maximum of 145.26 J/g of capsules, with an encapsulation efficiency of 62.88% and a mean diameter of 636 nm. The sub-cooling of the prepared M-NEPCMs is lower than 3 °C, with an acceptable thermal reliability after the thermal cycling test. A pre-emulsification prior to the addition of deionized water in the emulsification is beneficial to the morphology of the capsules, as the phase change enthalpy can be increased by 123.7%.

  5. Impacts of Residual Surfactant on Tetrachloroethene (PCE) Degradation Following Pilot-Scale SEAR Treatment at a Chloroethene-Impacted Site

    Science.gov (United States)

    Ramsburg, C. A.; Abriola, L. M.; Pennell, K. D.; Löffler, F. E.; Gamache, M.; Petrovskis, E. A.

    2003-04-01

    A pilot-scale surfactant-enhanced aquifer remediation (SEAR) demonstration was completed during the summer of 2000 at the Bachman Road site (Oscoda, MI USA). For this test, an aqueous solution of 60 g/L Tween 80 (polyoxyethylene (20) sorbitan monooleate) was used to recover tetrachloroethene (PCE) from a suspected source zone, located underneath a former dry-cleaning facility. Tween 80 was selected for use based upon its demonstrated capacity to solubilize PCE, “food-grade” status, and biodegradative potential. Hydraulic control was maintained throughout the test, with 95% of the injected surfactant mass recovered by a single extraction well. Source-zone monitoring conducted 15 months after SEAR treatment revealed the presence of previously undetected volatile fatty acids (acetate and formate) and PCE degradation products (trichloroethene, cis-1,2-dichloroethene, trans-1,2-dichlorethene, and vinyl chloride), in conjunction with PCE concentration reductions of approximately two orders-of-magnitude. The detection of volatile fatty acids is relevant, as they are likely fermentation products of residual Tween 80. Microbial reductive dechlorination is limited by available electron donors, and microcosm studies demonstrated that both acetate and formate support reductively dechlorinating populations present at the oligotrophic Bachman Road site aquifer. Surfactant transport simulations, using a regional flow model developed for the site, were employed to determine appropriate down-gradient monitoring locations. Drive point samples taken 15 months post-treatment in the vicinity of the simulated residual surfactant plume, contained elevated concentrations of acetate and PCE daughter products. Ongoing efforts include continued site-monitoring, and microcosm studies to corroborate a causal relationship between Tween 80 fermentation and PCE dechlorination.

  6. Chitosan and glyceryl monooleate nanostructures containing gemcitabine: potential delivery system for pancreatic cancer treatment.

    Science.gov (United States)

    Trickler, William J; Khurana, Jatin; Nagvekar, Ankita A; Dash, Alekha K

    2010-03-01

    The objectives of this study are to enhance cellular accumulation of gemcitabine with chitosan/glyceryl monooleate (GMO) nanostructures, and to provide significant increase in cell death of human pancreatic cancer cells in vitro. The delivery system was prepared by a multiple emulsion solvent evaporation method. The nanostructure topography, size, and surface charge were determined by atomic force microscopy (AFM), and a zetameter. The cellular accumulation, cellular internalization and cytotoxicity of the nanostructures were evaluated by HPLC, confocal microscopy, or MTT assay in Mia PaCa-2 and BxPC-3 cells. The average particle diameter for 2% and 4% (w/w) drug loaded delivery system were 382.3 +/- 28.6 nm, and 385.2 +/- 16.1 nm, respectively with a surface charge of +21.94 +/- 4.37 and +21.23 +/- 1.46 mV. The MTT cytotoxicity dose-response studies revealed the placebo at/or below 1 mg/ml has no effect on MIA PaCa-2 or BxPC-3 cells. The delivery system demonstrated a significant decrease in the IC50 (3 to 4 log unit shift) in cell survival for gemcitabine nanostructures at 72 and 96 h post-treatment when compared with a solution of gemcitabine alone. The nanostructure reported here can be resuspended in an aqueous medium that demonstrate increased effective treatment compared with gemcitabine treatment alone in an in vitro model of human pancreatic cancer. The drug delivery system demonstrates capability to entrap both hydrophilic and hydrophobic compounds to potentially provide an effective treatment option in human pancreatic cancer.

  7. Bioadhesive drug delivery system using glyceryl monooleate for the intravesical administration of paclitaxel.

    Science.gov (United States)

    Lee, Seung-Ju; Kim, Sae Woong; Chung, Hesson; Park, Yeong Taek; Choi, Young Wook; Cho, Yong-Hyun; Yoon, Moon Soo

    2005-10-01

    Many reports have shown that the efficacy of intravesical therapy for bladder cancer is in part limited by the poor penetration of drugs into the urothelium. The present study evaluated the effect of glyceryl monooleate (GMO) on the absorption of intravesically administered paclitaxel in a rabbit model of bladder cancer. Urine, plasma, and tissue pharmacokinetics were determined in rabbits treated for 120 min with paclitaxel (500 microg/20 ml) by intravesical instillation. Two formulations of GMO/paclitaxel were evaluated using different proportions of water, 15 and 30%, and Taxol was used as a control. Animals were observed for clinical signs of toxicity and necropsy was performed. 120 min after instillation, the bladder was emptied and excised. In the urine, paclitaxel concentration was decreased by 39.6 and 41.2% in the two experimental groups and by 25.2% in the control group. The paclitaxel concentrations in the urothelium were 53 and 56% of the urine concentration in both experimental groups, but 11% in the control group. The concentration then declined exponentially in the underlying capillary-perfused tissues, reaching equilibrium at a depth of 1,400-1,700 microm. The plasma concentrations were extremely low compared with concentrations in urine and bladder tissues and were not associated with clinical toxicity. We conclude that GMO has a significantly increased bioadhesiveness to bladder mucosa. Therefore, intravesical administration of GMO/paclitaxel/water provides a significant advantage for drugs targeting the bladder tissue, and paclitaxel represents a viable option for intravesical bladder cancer therapy. Copyright 2005 S. Karger AG, Basel.

  8. Testing with fragrance mix. Is the addition of sorbitan sesquioleate to the constituents useful?

    Science.gov (United States)

    Frosch, P J; Pilz, B; Burrows, D; Camarasa, J G; Lachapelle, J M; Lahti, A; Menné, T; Wilkinson, J D

    1995-05-01

    In a multicentre study, the value of adding sorbitan sesquioleate (SSO) to the constituents of the 8% fragrance mix (FM) was investigated. In 7 centres, 709 consecutive patients were tested with 2 types of FM from different sources, its 8 constituents with 1% SSO, its 8 constituents without SSO, and 20% SSO. 5 patients (0.71%) reacted to the emulsifier SSO itself, read as definitely allergic on day 3/4. 53 patients reacted to either one of the mixes with an allergic type of reaction. When tested with the constituents without SSO, 41.5% showed an allergic reaction versus 54.7% with SSO. If both types of reactions were considered (allergic and irritant) 38.3% of 73 patients showed a positive "breakdown" result without SSO, versus 54.8% with SSO. The differences were statistically significant. Reactivity to FM constituents was changed in a specific pattern by addition of SSO--irritant reactions increased, particularly for cinnamic alcohol, eugenol, geraniol, oak moss and hydroxycitronellal, whereas others showed only a slight change. Allergic reactions were also increased by SSO, but the rank order of the top 3 sensitizers (isoeugenol, oak moss and eugenol) did not change. Cinnamic alcohol was the only constituent with decreased reactivity after addition of SSO. A positive history of fragrance sensitivity (HFS) was clearly associated with a positive allergic reaction to either the mix or 1 of its constituents (51% versus 28.6% with a negative HFS). Irritant reactions were linked to a negative HFS in a high proportion (64.3%).(ABSTRACT TRUNCATED AT 250 WORDS)

  9. Effect of reaction time and polyethylene glycol monooleate-isocyanate composition on the properties of polyurethane-polysiloxane modified epoxy

    Science.gov (United States)

    Triwulandari, Evi; Ramadhan, Mohammad Kemilau; Ghozali, Muhammad

    2017-11-01

    Polyurethane-polysiloxane modified epoxy based on polyethylene glycol monooleate (PSME-PEGMO) was synthesized. Polyethylene glycol monooleate (PEGMO) for the synthesis of PSME-GMO was synthesized via esterification between oleic acid and polyethylene glycol by using sodium hydroxide as catalyst. Synthesis of PSME-PEGMO was conducted by reacting epoxy, isocyanate, PEGMO, and polysiloxane (hydrolyzed and condensable 3-glycidyloxypropyltrimethoxysilane) simultaneously in one step. This synthesis was carried out by varied the reaction time (1, 2, 3 hours), PEGMO-isocyanate composition (PI composition: 10 and 20 % toward epoxy), and isocyanate/PEGMO ratio (NCO/OH ratio: 1.5 and 2.5). Characterization of PSME-PEGMO was conducted by determining the isocyanate conversion, viscosity analysis, mechanical properties (tensile strength and elongation at break) and thermal analysis using thermogravimetric analysis (TGA). The data show that the PI composition and NCO/OH ratio does not affect the isocyanate conversion linearly. The viscosity of PSME-PEGMO product at ratio and composition variation show has tended to increase with increasing of reaction time. The highest tensile strength and elongation at break PSME-PEGMO was shown by PI composition 20%, NCO/OH ratio 2.5 and reaction time 3 hours.

  10. Rheology of oleo gels based on sorbitan and glyceryl mono stearates and vegetable oils for lubricating applications

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, R.; Franco, J. M.; Delgado, M. A.; Valencia, C.; Gallegos, C.

    2011-07-01

    Oleo gels based on sorbitan and glyceryl mono stearates and different types of vegetable oils, potentially applicable as biodegradable alternatives to traditional lubricating greases, have been studied. In particular, the rheological behavior, by means of small-amplitude oscillatory shear (SAOS) measurements, and some lubrication performance-related properties (mechanical stability and tribological response) have been evaluated in this work. SAOS response and mechanical stability of these oleo gels are significantly influenced by the type and concentration of the organogelator and the vegetable oil used in the formulations. Glyceryl monostearate (GMS) generally produces stronger gels than sorbitan monostearate (SMS). The use of low-viscosity oils, such as rapeseed and soybean oils, yields gels with significantly higher values of the linear viscoelastic functions than oleo gels prepared with high-viscosity oils, i.e. castor oil. The rheological behavior of SMS-based oleo gels also depends on the cooling rate applied during the gelification process. On the other hand, the oleo gels studied present low values of the friction coefficient obtained in a tribological contact, although only some GMS/castor oil-based oleo gels exhibit a suitable mechanical stability. (Author) 28 refs.

  11. Pharmacokinetics and enhanced oral bioavailability in beagle dogs of cyclosporine A encapsulated in glyceryl monooleate/poloxamer 407 cubic nanoparticles

    Directory of Open Access Journals (Sweden)

    Jie Lai

    2009-12-01

    Full Text Available Jie Lai1,2, Yi Lu1, Zongning Yin2, Fuqiang Hu3, Wei Wu11School of Pharmacy, Fudan University, Shanghai, China, 2West China School of Pharmacy, Sichuan University, Chengdu, China, 3School of Pharmacy, Zhejiang University, Hangzhou, ChinaAbstract: Efforts to improve the oral bioavailability of cyclosporine A (CyA remains a challenge in the field of drug delivery. In this study, glyceryl monooleate (GMO/poloxamer 407 cubic nanoparticles were evaluated as potential vehicles to improve the oral bioavailability of CyA. Cubic nanoparticles were prepared via the fragmentation of a bulk GMO/poloxamer 407 cubic phase gel by sonication and homogenization. The cubic inner structure formed was verified using Cryo-TEM. The mean diameters of the nanoparticles were about 180 nm, and the entrapment efficiency of these particles for CyA was over 85%. The in vitro release of CyA from these nanoparticles was less than 5% at 12 h. The results of a pharmacokinetic study in beagle dogs showed improved absorption of CyA from cubic nanoparticles as compared to microemulsion-based Neoral®; higher Cmax (1371.18 ± 37.34 vs 969.68 ± 176.3 ng mL-1, higher AUC0–t (7757.21 ± 1093.64 vs 4739.52 ± 806.30 ng h mL-1 and AUC0–∞ (9004.77 ± 1090.38 vs 5462.31 ± 930.76 ng h mL-1. The relative oral bioavailability of CyA cubic nanoparticles calculated on the basis of AUC0–∞ was about 178% as compared to Neoral®. The enhanced bioavailability of CyA is likely due to facilitated absorption by cubic nanoparticles rather than improved release.Keywords: nanoparticles, cubosomes, cyclosporine A, glyceryl monooleate, oral drug delivery, bioavailability, beagle dogs

  12. Effects of manganese, 2,5-xylidine, veratryl alcohol and tween 80 on ...

    African Journals Online (AJOL)

    During the cultivations, the exhaustion of glucose in the medium promoted nutritional stress, which, in turn, led to cell autolysis; reflected by an apparent reduction in the concentration of mycelium, and by an increase in the concentration of ammonium. The concentrations of extracellular proteins increased throughout the ...

  13. Effects of manganese, 2,5-xylidine, veratryl alcohol and tween 80 on ...

    African Journals Online (AJOL)

    patience

    2015-05-06

    May 6, 2015 ... been used for biopulping in industrial scale (Akhtar et al.,. 2000), is known for its selectivity in lignin degradation, due to its inefficiency in degrading wood .... weighing bottles, and oven-dried at 105°C until constant mass; which was used to determine biomass concentrations, after discounting the foam dry ...

  14. Current generation in microbial electrolysis cells with addition of amorphous ferric hydroxide, Tween 80, or DNA

    KAUST Repository

    Ren, Lijiao; Tokash, Justin C.; Regan, John M.; Logan, Bruce E.

    2012-01-01

    the maximum current density of both the mixed cultures (from 6.1 ± 0.9 A/m 2 to 8.8 ± 0.3 A/m 2) and pure cultures (from 4.8 ± 0.5 A/m 2 to 7.4 ± 1.1 A/m 2). Improved current production was sustained even after iron was no longer added to the medium

  15. Crystallization of low saturated lipid blends of palm and canola oils with sorbitan monostearate and fully hydrogenated palm oil.

    Science.gov (United States)

    Barbosa, Karina Martins; Cardoso, Lisandro Pavie; Ribeiro, Ana Paula Badan; Kieckbusch, Theo Guenter; Buscato, Monise Helen Masuchi

    2018-03-01

    Several scientific investigations have focused on providing new strategies for supporting the development of low saturated and zero trans lipid materials, as healthier fat alternatives for food application. This work evaluated the consistency, crystallization behavior, microstructure and polymorphism of six blends composed of palm and canola oils at different concentrations (100:0, 80:20, 60:40, 40:60, 20:80 and 0:100, in w/w%) added with 5.0% of fully hydrogenated palm oil (FHPO) or with a mixture of 2.5% of FHPO and 2.5% of sorbitan monostearate (SMS). The results were compared with the non-structured blends (standard samples). Through microstructure images, the formation of a more homogeneous and denser packed crystal network was observed for samples added with both crystallization modifiers (FHPO/SMS) compared to the corresponding standard samples, after stabilization at 25 °C during 3 h. In particular, enhanced crystallization modifications were observed for the 40:60 blend, in which the crystal form β' emerged after the addition of FHPO/SMS. Moreover, the 40:60 blend structured with FHPO/SMS showed increased consistency (from 30 to 658 g F /cm 2 ) and induced onset crystallization in a higher temperature (from 13.1 to 23.9 °C) compared with the non-structured one, due to the specific crystallization effects provided by both added structurants.

  16. Fabrication and Properties of Micro-Nanoencapsulated Phase Change Materials for Internally-Cooled Liquid Desiccant Dehumidification

    Directory of Open Access Journals (Sweden)

    Xiaofeng Niu

    2017-04-01

    Full Text Available Micro-nanoencapsulated phase change materials (M-NEPCMs are proposed to be useful in liquid desiccant dehumidification by restraining the temperature rise in the moisture-removal process and improving the dehumidification efficiency. In this paper, the n-octadecane M-NEPCMs with desirable thermal properties for internally-cooled dehumidification were fabricated by using compound emulsifiers through the in-situ polymerization method. Melamine-formaldehyde resin was used as the shell material. The effects of the mixing ratio, emulsification methods and amount of the compound emulsifiers on the morphology, size and thermal properties of the M-NEPCMs were investigated experimentally. The optimum weight mixing ratio of the compound emulsifiers is SDS (sodium dodecyl sulfate:Tween80 (polyoxyethylene sorbitan monooleate:Span80 (sorbitan monooleate = 0.1:0.6:0.3, which achieves the best stability of the n-octadecane emulsion. When the compound emulsifiers are 10 wt. % of the core material, the melting enthalpy of M-NEPCMs reaches its maximum of 145.26 J/g of capsules, with an encapsulation efficiency of 62.88% and a mean diameter of 636 nm. The sub-cooling of the prepared M-NEPCMs is lower than 3 °C, with an acceptable thermal reliability after the thermal cycling test. A pre-emulsification prior to the addition of deionized water in the emulsification is beneficial to the morphology of the capsules, as the phase change enthalpy can be increased by 123.7%.

  17. Microemulsion Using Polyoxyethylene Sorbitan Trioleate and its Usage for Skin Delivery of Resveratrol to Protect Skin against UV-Induced Damage.

    Science.gov (United States)

    Yutani, Reiko; Teraoka, Reiko; Kitagawa, Shuji

    2015-01-01

    We examined the phase behavior of various polyoxyethylene sorbitan fatty acid ester (polysorbates)/ethanol/isopropyl myristate (IPM)/150 mM NaCl solution (NaClaq) systems in order to prepare a microemulsion containing a low ratio of ethanol, which is more suitable for in vivo application. Using polyoxyethylene sorbitan trioleate (Tween 85), which has a large lipophilic moiety, as a surfactant component, single-phase domain of the phase diagram was the largest of all the polysorbates examined, and in particular a large oil-rich single-phase domain was obtained. When the ratio of Tween 85 to ethanol was changed from 1 : 1 to 3 : 1, the oil-rich single-phase domain further expanded, which led to a reduced ethanol concentration in the preparation. Thus, we determined the composition of the microemulsion to be Tween 85 : ethanol : IPM : NaClaq=30 : 10 : 53 : 7, and used it for skin delivery of resveratrol. Microemulsion gel was also prepared by adding 6.5% Aerosil) 200 into the microemulsion for ease of topical application. When applied with each vehicle, delivery of resveratrol into guinea pig skin in vitro was significantly enhanced compared with that by IPM, and resveratrol incorporated into the skin by microemulsion gel decreased lipid peroxidation to 29.5% compared with that of the control. Pretreatment of guinea pig dorsal skin with the microemulsion gel containing resveratrol almost completely prevented UV-B-induced erythema formation in vivo. These findings demonstrate that the microemulsion using Tween 85 containing a minimal concentration of ethanol enhanced the skin delivery of resveratrol and the incorporated resveratrol exhibited a protective effect against UV-induced oxidative damage.

  18. Influence of metacide - surfactant complexes on agricultural crops

    Directory of Open Access Journals (Sweden)

    Orynkul Esimova

    2014-12-01

    Full Text Available The complexes based on surfactants and polyhexamethyleneguanidine hydrochloride (metacide are important for agriculture. This paper considers compositions of known bactericidal metacide with different surfactants: anionic surfactant sodium dodecylsulphate (DDSNa and nonionic surfactant Tween 80 (monooleate of oxyethylenated anhydrosorbitols. The effect of individual components and associates of metacide and surfactants on productivity and infection of cereals was studied. According to the study, the highest productivity and infection rate were shown by the associate of metacide and Tween-80. At concentration of Tween-80 in aqueous solution equal to 0.001% in combination with metacide, efficiency was 98% at 0% infection. The surface tension and the wetting of metacide, DDSNa, Tween-80, and associates of metacide with surfactants were studied. In comparison with individual components, metacide-DDSNa and metacide-Tween-80 associates have higher surface activity.

  19. Microemulsion of babassu oil as a natural product to improve human immune system function.

    Science.gov (United States)

    Pessoa, Rafael Souza; França, Eduardo Luzia; Ribeiro, Elton Brito; Lanes, Patrícia Kelly Dias; Chaud, Natalina Galdeano Abud; Moraes, Lucélia Campelo Albuquerque; Honorio-França, Adenilda Cristina

    2015-01-01

    The aim of this study was to develop and characterize a babassu oil microemulsion system and determine the effect of this microemulsion on the functional activity of phagocytes. The microemulsion was formulated using distilled water, babassu as the oil phase component, Sorbitan monooleate-Span 80(®) (SP), Polysorbate 80-Tween 80(®) (TW), and 1-butanol (BT). Pseudoternary diagrams were prepared, and microemulsion diagram regions were preselected. Rheological characterization and preliminary and accelerated stability tests were performed. The effect of the microemulsion on the interactions between leukocytes and bacteria was determined by superoxide release, phagocytosis, and microbicidal activity. The developed formulation SP/TW/BT (4.2/4.8/1.0) was classified as oil/water, showed a Newtonian profile, and had linear viscosity. When we assessed the interaction of the microemulsion or babassu oil with phagocytes, we observed an increase in superoxide, phagocytosis, and microbicidal activity. The babassu oil microemulsion system is an option for future applications, including for vaccine delivery systems. Babassu oil is a natural product, so is an alternative for future immunotherapy strategies, in particular for infectious diseases.

  20. Kinetic formation of silver-copper nanoparticles and its characterization

    Science.gov (United States)

    Zulkafi, Nurul Hikmah; Idrus, Nor Faeqah; Jai, Junaidah; Hadi, Abdul

    2017-12-01

    A study of the kinetic formation of silver-copper nanoparticles in aqueous medium on the basis of size distribution and its characterization has been carried out and reported in this paper. The Ag-Cu nanoparticles were synthesized through polyol method that using Ethylene Glycol (H2C6O12) as a reduction agent and solvent and Polyoxyethylene-(80)-Sorbitan Monooleate (Tween 80) as a stabilizer. The kinetic formation of Ag-Cu nanoparticles was observed using Dynamic Light Scattering (DLS) and characterized by using X-ray Diffraction (XRD), Field Emission Scanning Electron Microscope (FESEM) and Transmission Electron Microscope (TEM). The XRD analysis results confirmed that size distribution was strongly dependent on molarity of precursors of silver (AgNO3) and copper (Cu(NO3)2.3H2O). The FESEM and TEM analysis indicated the existence of Ag and Cu nanoparticles in the core-shell shape. The silver-copper nanoparticles were spherical and uniform particles size with the average size of about 28 nm and 38 nm for silver and copper, respectively. DLS observation showed the growth of nanoparticles at the temperature of 140°C as the effect of reaction time at 1, 2, 3, 4 and 5 hours.

  1. Evaluation of the mechanism of skin enhancing surfactants on the biomembrane of shed snake skin.

    Science.gov (United States)

    Wonglertnirant, Nanthida; Ngawhirunpat, Tanasait; Kumpugdee-Vollrath, Mont

    2012-01-01

    The aim of the present work was to investigate the effects of different surfactants at various concentrations as a skin penetration enhancer through the biomembrane of the shed skin of Naja kaouthia. Additionally, the enhancer mechanism(s) of each class of surfactants were evaluated using physical characterization techniques, such as scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, and small and wide angle X-ray scattering (SWAXS). Our results showed that skin permeability increased with increasing concentrations of surfactants and the degree of increase was higher for the model hydrophilic permeant, deuterium dioxide (D(2)O), than the lipophilic permeant, ketoprofen (KP). Ionic surfactants, sodium lauryl sulfate (SLS) and cetyl trimethyl ammonium bromide (CTAB), demonstrated higher enhancement ability than the polyoxyethylene (20) sorbitan mono-oleate (Tween 80) non-ionic surfactant, which was consistent with the results from physical characterization studies. Increasing amounts of permeated drug resulted in an increase in membrane interactions. From our observations, it can be assumed that SLS and CTAB can be localized inside the biomembrane and thereby enhance drug permeation mainly through interactions with intercellular lipids in the stratum corneum (SC) and the creation of a perturbed microenvironment among lipid alkyl chains and polar head groups.

  2. Effect of calcination temperature on structural properties and photocatalytic activity of Mn-C-codoped TiO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Jianbo; Xin, Wei; Liu, Guanglong; Lin, Die; Zhu, Duanwei, E-mail: liugl@mail.hzau.edu.cn [Laboratory of Eco-Environmental Engineering Research, College of Resources and Environment, Huazhong Agricultural University (HZAU), Wuhan (China)

    2016-03-15

    Mn-C-codoped TiO{sub 2} catalysts were synthesized by modified sol-gel method based on the self-assembly technique using polyoxyethylene sorbitan monooleate (Tween 80) as template and carbon precursor and the effect of calcination temperature on their structural properties and photocatalytic activity were investigated. The XRD results showed undoped and Mn-C-codoped TiO{sub 2} calcined at 400 deg C only include anatase phase and the rutile phase appears when the calcination temperature reached to 600 deg C. UV-vis absorption spectroscopy demonstrates that the absorption spectra are strongly modified by the calcination temperature. Moreover, the Mn-C-TiO{sub 2} calcined at 400 deg C showed the lowest PL intensity due to a decrease in the recombination rate of photogenerated electrons and holes under light irradiation. The photocatalytic activity of Mn-C-codoped TiO{sub 2} were evaluated by the degradation of methyl orange (MO) under the simulate daylight irradiation and all the prepared Mn-C-codoped TiO{sub 2} samples exhibited high photocatalytic activities for photocatalytic decolorisation of methyl orange aqueous solution. At 400 deg C, the Mn-C-codoped TiO{sub 2} samples showed the highest photocatalytic activity due to synergetic effects of good crystallize ation, appropriate phase composition and slower recombination rate of photogenerated charge carriers, which further confirms the calcination temperature could affect the properties of Mn-C-codoped TiO2 significantly. (author)

  3. Topical glycerol monooleate/propylene glycol formulations enhance 5-aminolevulinic acid in vitro skin delivery and in vivo protophorphyrin IX accumulation in hairless mouse skin.

    Science.gov (United States)

    Steluti, Regilene; De Rosa, Fernanda Scarmato; Collett, John; Tedesco, Antônio Cláudio; Bentley, Maria Vitória Lopes Badra

    2005-08-01

    Photodynamic therapy (PDT), a potential therapy for cancer treatment, utilizes exogenously applied or endogenously formed photosensitizers, further activated by light in an appropriate wavelength and dose to induce cell death through free radical formation. 5-Aminolevulinic acid (5-ALA) is a pro-drug which can be converted to the effective photosensitizer, protoporphyrin IX (PpIX). However, the use of 5-ALA in PDT is limited by the low penetration capacity of this highly hydrophilic molecule into appropriate skin layers. In the present study, we propose to increase 5-ALA penetration by using formulations containing glycerol monooleate (GMO), an interesting and useful component of pharmaceutical formulations. Propylene glycol solutions containing different concentrations of GMO significantly increased the in vitro skin permeation/retention of 5-ALA in comparison to control solutions. In vivo studies also showed increased PpIX accumulation in mouse hairless skin, after the use of topical 5-ALA formulations containing GMO in a concentration-dependent manner. The results show that skin 5-ALA penetration and PpIX accumulation, important factors for the success of topical 5-ALA-PDT in skin cancer, are optimized by GMO/propylene glycol formulations.

  4. Evaluation of biostimulation and Tween 80 addition for the bioremediation of long-term DDT-contaminated soil.

    Science.gov (United States)

    Betancur-Corredor, Bibiana; Pino, Nancy J; Cardona, Santiago; Peñuela, Gustavo A

    2015-02-01

    The bioremediation of a long-term contaminated soil through biostimulation and surfactant addition was evaluated. The concentrations of 1,1,1-trichloro-2,2-bis(4-chlorophenyl) ethane (DDT) and its metabolites 1,1-dichloro-2,2-bis(4-chlorophenyl) ethane (DDD) and 1,1-dichloro-2,2-bis(4-chlorophenyl) ethylene (DDE) were monitored during an 8-week remediation process. Physicochemical characterization of the treated soil was performed before and after the bioremediation process. The isolation and identification of predominant microorganisms during the remediation process were also carried out. The efficiency of detoxification was evaluated after each bioremediation protocol. Humidity and pH and the heterotrophic microorganism count were monitored weekly. The DDT concentration was reduced by 79% after 8 weeks via biostimulation with surfactant addition (B+S) and 94.3% via biostimulation alone (B). Likewise, the concentrations of the metabolites DDE and DDD were reduced to levels below the quantification limits. The microorganisms isolated during bioremediation were identified as Bacillus thuringiensis, Flavobacterium sp., Cuprivadius sp., Variovorax soli, Phenylobacterium sp. and Lysobacter sp., among others. Analysis with scanning electron microscopy (SEM) allowed visualization of the colonization patterns of soil particles. The toxicity of the soil before and after bioremediation was evaluated using Vibrio fischeri as a bioluminescent sensor. A decrease in the toxic potential of the soil was verified by the increase of the concentration/effect relationship EC50 to 26.9% and 27.2% for B+S and B, respectively, compared to 0.4% obtained for the soil before treatment and 2.5% by natural attenuation after 8 weeks of treatment. Copyright © 2014. Published by Elsevier B.V.

  5. Optimisation and Characterisation of Lipase-Catalysed Synthesis of a Kojic Monooleate Ester in a Solvent-Free System by Response Surface Methodology.

    Directory of Open Access Journals (Sweden)

    Khairulazhar Jumbri

    Full Text Available Kojic acid is widely used to inhibit the browning effect of tyrosinase in cosmetic and food industries. In this work, synthesis of kojic monooleate ester (KMO was carried out using lipase-catalysed esterification of kojic acid and oleic acid in a solvent-free system. Response Surface Methodology (RSM based on central composite rotatable design (CCRD was used to optimise the main important reaction variables, such as enzyme amount, reaction temperature, substrate molar ratio, and reaction time along with immobilised lipase from Candida Antarctica (Novozym 435 as a biocatalyst. The RSM data indicated that the reaction temperature was less significant in comparison to other factors for the production of a KMO ester. By using this statistical analysis, a quadratic model was developed in order to correlate the preparation variable to the response (reaction yield. The optimum conditions for the enzymatic synthesis of KMO were as follows: an enzyme amount of 2.0 wt%, reaction temperature of 83.69°C, substrate molar ratio of 1:2.37 (mmole kojic acid:oleic acid and a reaction time of 300.0 min. Under these conditions, the actual yield percentage obtained was 42.09%, which is comparably well with the maximum predicted value of 44.46%. Under the optimal conditions, Novozym 435 could be reused for 5 cycles for KMO production percentage yield of at least 40%. The results demonstrated that statistical analysis using RSM can be used efficiently to optimise the production of a KMO ester. Moreover, the optimum conditions obtained can be applied to scale-up the process and minimise the cost.

  6. Optimisation and Characterisation of Lipase-Catalysed Synthesis of a Kojic Monooleate Ester in a Solvent-Free System by Response Surface Methodology.

    Science.gov (United States)

    Jumbri, Khairulazhar; Al-Haniff Rozy, Mohd Fahruddin; Ashari, Siti Efliza; Mohamad, Rosfarizan; Basri, Mahiran; Fard Masoumi, Hamid Reza

    2015-01-01

    Kojic acid is widely used to inhibit the browning effect of tyrosinase in cosmetic and food industries. In this work, synthesis of kojic monooleate ester (KMO) was carried out using lipase-catalysed esterification of kojic acid and oleic acid in a solvent-free system. Response Surface Methodology (RSM) based on central composite rotatable design (CCRD) was used to optimise the main important reaction variables, such as enzyme amount, reaction temperature, substrate molar ratio, and reaction time along with immobilised lipase from Candida Antarctica (Novozym 435) as a biocatalyst. The RSM data indicated that the reaction temperature was less significant in comparison to other factors for the production of a KMO ester. By using this statistical analysis, a quadratic model was developed in order to correlate the preparation variable to the response (reaction yield). The optimum conditions for the enzymatic synthesis of KMO were as follows: an enzyme amount of 2.0 wt%, reaction temperature of 83.69°C, substrate molar ratio of 1:2.37 (mmole kojic acid:oleic acid) and a reaction time of 300.0 min. Under these conditions, the actual yield percentage obtained was 42.09%, which is comparably well with the maximum predicted value of 44.46%. Under the optimal conditions, Novozym 435 could be reused for 5 cycles for KMO production percentage yield of at least 40%. The results demonstrated that statistical analysis using RSM can be used efficiently to optimise the production of a KMO ester. Moreover, the optimum conditions obtained can be applied to scale-up the process and minimise the cost.

  7. Enhanced transdermal delivery with less irritation by magainin pore-forming peptide with a N-lauroylsarcosine and sorbitan monolaurate mixture.

    Science.gov (United States)

    Lee, Haerin; Park, Juhyun; Kim, Yeu-Chun

    2018-02-01

    Transdermal drug delivery is advantageous over other conventional drug administration routes. However, it can be inefficient because of the natural barrier of the stratum corneum which is the uppermost layer of the skin. A previous study verified that the treatment of magainin pore-forming peptide with N-lauroylsarcosine (NLS) on human skin can increase skin permeability by 47-fold. However, NLS is well known as a potential skin irritant. The irritation potential of NLS is known to decrease when mixed with sorbitan monolaurate (S20). Encouraged by these results, we combined S20 with magainin-NLS to enhance transdermal drug transport with less skin irritation. In this study, nine groups with magainin and NLS:S20 mixtures at different concentrations and weight fractions were screened to maximize their synergistic effect. To quantify the efficacy to toxicity ratio of each formulation, we defined the ratio as the "enhancement ratio/irritation potential (ER/IP)." The ER was observed by Franz cell diffusion of the target drug fluorescein, and the IP was measured by the cytotoxicity of the NIH/3T3 mouse fibroblast cell line. As a result, the magainin with the NLS:S20 mixture increased the permeability of porcine skin as well as decreased the toxicity. Among the various combinations, a formulation of 2% (w/v) NLS:S20 with a weight fraction of 0.6:0.4 had the largest ER/IP. ATR-FTIR spectroscopy of the formulations and skin was done to analyze the interactions in the formulations themselves and between the formulations and the skin. Both the intercellular lipidic route and transcellular route through the stratum corneum protein were involved in the delivery of fluorescein. This study turned pore-forming peptides into an efficient and safe penetration enhancer by combining them with other chemical penetration enhancers. Moreover, this discovery could be a possible method for enabling the transdermal delivery of macromolecules.

  8. Efficiency modeling of solidification/stabilization of multi-metal contaminated industrial soil using cement and additives

    International Nuclear Information System (INIS)

    Voglar, Grega E.; Lestan, Domen

    2011-01-01

    Highlights: → We assess the feasibility of using soil S/S for industrial land reclamation. → Retarders, accelerators, plasticizers were used in S/S cementitious formulation. → We proposed novel S/S efficiency model for multi-metal contaminated soils. - Abstract: In a laboratory study, formulations of 15% (w/w) of ordinary Portland cement (OPC), calcium aluminate cement (CAC) and pozzolanic cement (PC) and additives: plasticizers cementol delta ekstra (PCDE) and cementol antikorodin (PCA), polypropylene fibers (PPF), polyoxyethylene-sorbitan monooleate (Tween 80) and aqueous acrylic polymer dispersion (Akrimal) were used for solidification/stabilization (S/S) of soils from an industrial brownfield contaminated with up to 157, 32,175, 44,074, 7614, 253 and 7085 mg kg -1 of Cd, Pb, Zn, Cu, Ni and As, respectively. Soils formed solid monoliths with all cementitious formulations tested, with a maximum mechanical strength of 12 N mm -2 achieved after S/S with CAC + PCA. To assess the S/S efficiency of the used formulations for multi-element contaminated soils, we propose an empirical model in which data on equilibrium leaching of toxic elements into deionized water and TCLP (toxicity characteristic leaching procedure) solution and the mass transfer of elements from soil monoliths were weighed against the relative potential hazard of the particular toxic element. Based on the model calculation, the most efficient S/S formulation was CAC + Akrimal, which reduced soil leachability of Cd, Pb, Zn, Cu, Ni and As into deionized water below the limit of quantification and into TCLP solution by up to 55, 185, 8750, 214, 4.7 and 1.2-times, respectively; and the mass transfer of elements from soil monoliths by up to 740, 746, 104,000, 4.7, 343 and 181-times, respectively.

  9. Efficiency modeling of solidification/stabilization of multi-metal contaminated industrial soil using cement and additives.

    Science.gov (United States)

    Voglar, Grega E; Leštan, Domen

    2011-08-30

    In a laboratory study, formulations of 15% (w/w) of ordinary Portland cement (OPC), calcium aluminate cement (CAC) and pozzolanic cement (PC) and additives: plasticizers cementol delta ekstra (PCDE) and cementol antikorodin (PCA), polypropylene fibers (PPF), polyoxyethylene-sorbitan monooleate (Tween 80) and aqueous acrylic polymer dispersion (Akrimal) were used for solidification/stabilization (S/S) of soils from an industrial brownfield contaminated with up to 157, 32,175, 44,074, 7614, 253 and 7085mg kg(-1) of Cd, Pb, Zn, Cu, Ni and As, respectively. Soils formed solid monoliths with all cementitious formulations tested, with a maximum mechanical strength of 12N mm(-2) achieved after S/S with CAC+PCA. To assess the S/S efficiency of the used formulations for multi-element contaminated soils, we propose an empirical model in which data on equilibrium leaching of toxic elements into deionized water and TCLP (toxicity characteristic leaching procedure) solution and the mass transfer of elements from soil monoliths were weighed against the relative potential hazard of the particular toxic element. Based on the model calculation, the most efficient S/S formulation was CAC+Akrimal, which reduced soil leachability of Cd, Pb, Zn, Cu, Ni and As into deionized water below the limit of quantification and into TCLP solution by up to 55, 185, 8750, 214, 4.7 and 1.2-times, respectively; and the mass transfer of elements from soil monoliths by up to 740, 746, 104,000, 4.7, 343 and 181-times, respectively. Copyright © 2011 Elsevier B.V. All rights reserved.

  10. Microemulsion of babassu oil as a natural product to improve human immune system function

    Directory of Open Access Journals (Sweden)

    Pessoa RS

    2014-12-01

    Full Text Available Rafael Souza Pessoa,1 Eduardo Luzia França,1,2­ Elton Brito Ribeiro,1 Patrícia Kelly Dias Lanes,1 Natalina Galdeano Abud Chaud,1 Lucélia Campelo Albuquerque Moraes,2 Adenilda Cristina Honorio-França1,2 1Post Graduate Program in Material Science, 2Institute of Biological and Health Science, Federal University of Mato Grosso, Barra do Garças, MT, Brazil Background: The aim of this study was to develop and characterize a babassu oil microemulsion system and determine the effect of this microemulsion on the functional activity of phagocytes.Methods: The microemulsion was formulated using distilled water, babassu as the oil phase component, Sorbitan monooleate-Span 80® (SP, Polysorbate 80-Tween 80® (TW, and 1-butanol (BT. Pseudoternary diagrams were prepared, and microemulsion diagram regions were preselected. Rheological characterization and preliminary and accelerated stability tests were performed. The effect of the microemulsion on the interactions between leukocytes and bacteria was determined by superoxide release, phagocytosis, and microbicidal activity.Results: The developed formulation SP/TW/BT (4.2/4.8/1.0 was classified as oil/water, showed a Newtonian profile, and had linear viscosity. When we assessed the interaction of the microemulsion or babassu oil with phagocytes, we observed an increase in superoxide, phagocytosis, and microbicidal activity.Conclusion: The babassu oil microemulsion system is an option for future applications, including for vaccine delivery systems. Babassu oil is a natural product, so is an alternative for future immunotherapy strategies, in particular for infectious diseases. Keywords: vegetable oil, babassu, microemulsion, phagocytes, delivery systems

  11. Efficiency modeling of solidification/stabilization of multi-metal contaminated industrial soil using cement and additives

    Energy Technology Data Exchange (ETDEWEB)

    Voglar, Grega E. [RDA - Regional Development Agency Celje, Kidriceva ulica 25, 3000 Celje (Slovenia); Lestan, Domen, E-mail: domen.lestan@bf.uni-lj.si [Agronomy Department, Centre for Soil and Environmental Science, Biotechnical Faculty, University of Ljubljana, Jamnikarjeva 101, 1000 Ljubljana (Slovenia)

    2011-08-30

    Highlights: {yields} We assess the feasibility of using soil S/S for industrial land reclamation. {yields} Retarders, accelerators, plasticizers were used in S/S cementitious formulation. {yields} We proposed novel S/S efficiency model for multi-metal contaminated soils. - Abstract: In a laboratory study, formulations of 15% (w/w) of ordinary Portland cement (OPC), calcium aluminate cement (CAC) and pozzolanic cement (PC) and additives: plasticizers cementol delta ekstra (PCDE) and cementol antikorodin (PCA), polypropylene fibers (PPF), polyoxyethylene-sorbitan monooleate (Tween 80) and aqueous acrylic polymer dispersion (Akrimal) were used for solidification/stabilization (S/S) of soils from an industrial brownfield contaminated with up to 157, 32,175, 44,074, 7614, 253 and 7085 mg kg{sup -1} of Cd, Pb, Zn, Cu, Ni and As, respectively. Soils formed solid monoliths with all cementitious formulations tested, with a maximum mechanical strength of 12 N mm{sup -2} achieved after S/S with CAC + PCA. To assess the S/S efficiency of the used formulations for multi-element contaminated soils, we propose an empirical model in which data on equilibrium leaching of toxic elements into deionized water and TCLP (toxicity characteristic leaching procedure) solution and the mass transfer of elements from soil monoliths were weighed against the relative potential hazard of the particular toxic element. Based on the model calculation, the most efficient S/S formulation was CAC + Akrimal, which reduced soil leachability of Cd, Pb, Zn, Cu, Ni and As into deionized water below the limit of quantification and into TCLP solution by up to 55, 185, 8750, 214, 4.7 and 1.2-times, respectively; and the mass transfer of elements from soil monoliths by up to 740, 746, 104,000, 4.7, 343 and 181-times, respectively.

  12. Development and evaluation of exemestane-loaded lyotropic liquid crystalline gel formulations

    OpenAIRE

    Musa, Muhammad Nuh; David, Sheba Rani; Zulkipli, Ihsan Nazurah; Mahadi, Abdul Hanif; Chakravarthi, Srikumar; Rajabalaya, Rajan

    2017-01-01

    Introduction: The use of liquid crystalline (LC) gel formulations for drug delivery has considerably improved the current delivery methods in terms of bioavailability and efficacy. The purpose of this study was to develop and evaluate LC gel formulations to deliver the anti-cancer drug exemestane through transdermal route. Methods: Two LC gel formulations were prepared by phase separation coacervation method using glyceryl monooleate (GMO), Tween 80 and Pluronic® F127 (F127). The formulations...

  13. Phase diagram studies for microencapsulation of pharmaceuticals using cellulose acetate trimellitate.

    Science.gov (United States)

    Sanghvi, S P; Nairn, J G

    1991-04-01

    Phase diagrams were prepared to indicate the region of microcapsule formation for the following system: cellulose acetate trimellitate, light mineral oil, and the solvent mixture (acetone:ethanol), using chloroform as the hardening agent. The effect of sorbitan monoleate, sorbitan monolaurate, and sorbitan trioleate on the region of the phase diagram for the formation of microcapsules was investigated. The results indicate that microcapsules are readily formed when the polymer concentration is in the 0.5-1.5% range and the solvent concentration is in the 5-10% range. Aggregation of microcapsules was minimized by using lower solvent concentration. Low concentrations of sorbitan monooleate in mineral oil (less than or equal to 1%) gave products that had smoother coats and more uniform particle size. Surfactants with low hydrophile:lipophile balance produced larger regions on the phase diagram for microencapsulation compared with a surfactant with higher hydrophile:lipophile balance. A mechanism for microencapsulation is described. Tartrazine microcapsules produced using different concentrations of surfactant were tested for dissolution characteristics in both acidic and neutral conditions. Tartrazine-containing microcapsules prepared by using 3% sorbitan monooleate had the lowest release in acidic conditions. The effect of surfactant and formulation concentration on microcapsule size was studied by analyzing the particle size distribution for both blank and tartrazine-containing microcapsules. The smallest microcapsule size was obtained when the sorbitan monooleate concentration was 3%. It appears that there is an upper limit for the surfactant concentration that could be used to achieve successful microencapsulation.

  14. Microemulsion based hybrid biofuels using glycerol monooleate

    International Nuclear Information System (INIS)

    Bora, Plaban; Konwar, Lakhya Jyoti; Deka, Dhanapati

    2016-01-01

    Highlights: • Fuel quality of GMO based MHBFs. • Effect of externally added monoglyceride surfactant (GMO) on fuel characteristics of MHBF. • Structural and dynamic behaviors of GMO based MHBFs. • Can offer strong candidature for future biofuel industry. - Abstract: The present investigation aims to highlighten the effect of monoglyceride surfactant (GMO) on structure and dynamic behavior and other fuel characteristics of microemulsion based hybrid biofuels (MHBFs). Fuel quality of MHBFs formulated using purified GMO (>90%), which was prepared by esterification of glycerol, was investigated in the study. Phase behaviors, droplet size distribution, number of droplets present in the system, average droplet size and average length of surface active agents were studied as a part of structural investigations of the GMO based MHBFs. Diffusion coefficient, energy barrier to droplet coalescence and rate of coalescence of droplets were also investigated for the formulated MHBFs. The number of droplets, length of surface active agent and the diffusion co-efficient were in the ranges of 1.87 × 10"2"1–5.66 × 10"2"1/m"3, 0.92–1.07 nm and 1.00 × 10"−"1"1–1.79 × 10"−"1"1 m"2/s, respectively. The rate of droplet coalescence was obtained in the range 2.77 × 10"−"4–8.78 × 10"−"4 times the collision factor. MHBFs incorporating the glycerol derived bio-based nonionic surfactant GMO exhibited viscosity of 4.12 mm"2/s (at 40 °C), gross calorific value (GCV) of 39.17 MJ/kg and pour point of −7 °C.

  15. and α-Fe 2 O 3 nano powders synthesized by emulsion precipitation

    African Journals Online (AJOL)

    Nano crystals of γ-Fe2O3 (maghemite) were synthesized by emulsion precipitation method using kerosene as oil phase, SPAN- 80 (sorbitane monooleate) as the surfactant and sodium hydroxide as the precipitating agent. The characterization of the samples by FTIR (Fourier transform infra-red) and XRD (X-ray diffraction) ...

  16. Validation of {sup 99m}Tc-labeled '4+1' fatty acids for myocardial metabolism and flow imaging

    Energy Technology Data Exchange (ETDEWEB)

    Mirtschink, Peter [Institute of Physiology, Technical University Dresden, 01307 Dresden (Germany)], E-mail: peter_mirtschink@web.de; Stehr, Sebastian N. [Department of Anesthesiology, Technical University Dresden, 01307 Dresden (Germany); Walther, Martin; Pietzsch, Jens; Bergmann, Ralf; Pietzsch, Hans-Juergen [Institute of Radiopharmacy, Forschungszentrum Dresden-Rossendorf, 01314 Dresden (Germany); Weichsel, Johannes; Pexa, Annette; Dieterich, Peter [Institute of Physiology, Technical University Dresden, 01307 Dresden (Germany); Wunderlich, Gerd [Department of Nuclear Medicine, Technical University Dresden, 01307 Dresden (Germany); Binas, Bert [Department of Veterinary Pathobiology, Texas A and M University, College Station, TX 77843 (United States); Kropp, Joachim [Department of Nuclear Medicine Carl-Thiem Hospital Cottbus, 03048 Cottbus (Germany); Deussen, Andreas [Institute of Physiology, Technical University Dresden, 01307 Dresden (Germany)

    2009-10-15

    Introduction: {sup 13}C, {sup 18}F and {sup 123}I fatty acids (FA) are used for myocardial imaging. Recently, our group showed that [{sup 99m}Tc]-labeled '4+1' FA are extracted into the rat and guinea pig myocardium. The present study evaluates determinants of myocardial uptake and whole body biodistribution of these FA derivatives. Methods: Studies were performed with isolated perfused hearts of Wistar-Kyoto (WKY) and spontaneously hypertensive rats (SHR) with a FAT/CD36 deficiency, as well as with heart type FA binding protein knockout mice (H-FABP){sup -/-} and H-FABP{sup +/+}. Eight 4+1-{sup 99m}Tc-FA were applied for 3 min followed by 1-min washout. A mathematical model was used to analyze FA dynamics and binding to proteins. Whole-body distribution was studied in rats with and without Tween 80. In vitro fractionation studies with [{sup 99m}Tc]-FA assessed red blood cell uptake as well as association with plasma lipoproteins very low-density lipoprotein (VLDL), low-density lipoprotein (LDL) and high-density lipoprotein (HDL). Results: Myocardial extraction was 19.0-33.0% of the infused dose in isolated WKY and 15.2-26.4% in SHR hearts. However, H-FABP{sup -/-} showed a marked reduction of tracer extraction [2.8{+-}0.6%ID (percent injected dose) vs. 17{+-}2%ID P<.001]. Uptake in red blood cells (<1.2%ID) and incorporation into lipoproteins were negligible. Incubation of {sup 99m}Tc-FA with albumin reduced ventricular extraction (P<.001) into the range of established iodinated FA tracers. polyoxyethylene(20) sorbitan monooleate improved the heart-to-liver ratio in the biodistribution studies. Conclusions: Myocardial uptake of [{sup 99m}Tc]-FA 4+1 derivatives is dependent on H-FABP. These substances may therefore provide a new tool to specifically assess regional myocardial changes of H-FABP.

  17. A mucoadhesive in situ gel delivery system for paclitaxel

    OpenAIRE

    Jauhari, Saurabh; Dash, Alekha K.

    2006-01-01

    MUC1 gene encodes a transmembrane mucin glycoprotein that is overexpressed in human breast cancer and colon cancer. The objective of this study was to develop an in situ gel delivery system containing paclitaxel (PTX) and mucoadhesives for sustained and targeted delivery of anticancer drugs. The delivery system consisted of chitosan and glyceryl monooleate (GMO) in 0.33M citric acid containing PTX. The in vitro release of PTX from the gel was performed in presence and absence of Tween 80 at d...

  18. Carbopol hydrogel/sorbitan monostearate-almond oil based ...

    African Journals Online (AJOL)

    stiff' and 'semi-fluid' to evaluate the spreadability of creams ... mechanical characteristics of the system, which would affect ... hydrocarbon chain of SMS may be the stabilizing factor in ... mechanical characterizations and in vitro drug delivery.

  19. Glycerol monooleate/solvents systems for progesterone transdermal delivery: In vitro permeation and microscopic studies Sistemas monoleína/solventes para a liberação transdérmica da progesterona: estudos de permeação cutânea e microscópicos

    Directory of Open Access Journals (Sweden)

    Gislaine R Pereira

    2002-03-01

    Full Text Available Transdermal delivery of most drugs is precluded by the barrier characteristics of the stratum corneum (SC. Chemical penetration enhancers are capable of interacting with SC constituents, inducing a temporary reversible increase in the skin permeability. The aim of this work was to assess the influence of glycerol monooleate (GMO/solvents systems on percutaneous absorption across hairless mouse SC of a lipophilic drug, progesterone (PG, as well as its effect on the SC structural characteristics, by scanning electron microscopy (SEM and confocal laser scanning microscopy (CLSM. The morphological changes observed in the hairless mouse SC suggest a GMO effect on the skin barrier. In addition, the increase in the In vitro PG flux and in vivo penetration of a fluorescent label point towards GMO as a potential absorption enhancer. The results obtained showed that GMO/solvents systems provoked changes in the SC that could be causing increased permeation of PG across hairless mouse skin, optimising in this way the transdermal delivery of this drug.A liberação transdérmica de muitos fármacos é dificultada pelas características de barreira do estrato córneo. Promotores químicos de absorção cutânea são capazes de interagir com os constituintes do estrato córneo, induzindo aumento temporário e reversível na permeabilidade da pele. O objetivo deste trabalho foi avaliar a influência de sistemas monoleína (monoleato de glicerol/solventes na absorção percutânea de um fármaco lipofílico (a progesterona, através do estrato córneo de camundongos sem pelo, bem como o efeito da monoleína nas características estruturais do estrato córneo, por meio de microscopia eletrônica de varredura (SEM e microscopia de varredura confocal a laser (CLSM. As alterações morfológicas observadas no estrato córneo de camundongos sem pelo sugerem efeito da monoleína na barreira da pele. E, ainda, o aumento no fluxo In vitro da progesterona, bem como na

  20. Synthesis of Barium Titanate from Titanyl Acylate Precursor by Sol-precipitate Method

    International Nuclear Information System (INIS)

    Thandar Win; Kyaw Naing; Khin Mar Tun

    2008-03-01

    Nanometersize barium titanates (BaTiO3:BT) powders can be obtained by sol-precipitate method in the presence of polyoxyethylene (20) sorbiton monooleate (Tween-80) as a polymeric surface modifier in a strong alkaline solution (pH > 13). FT-IR, TG/DTA, SEM and XRD were used to investigate the effects of the surfactant influence on the morphology of the obtained BaTiO3 powders. With adding surfactant, a slower rate of hydrolyzation is observed and the rate of condensation is slower. The addition of Tween-80 surfactant in general leads to the formation of smaller particle size of BaTi)3 (70-100 nm). Without adding surfactant, larger particle size of BaTiO3 (100-200 nm) was obtained. The nanometersize BaTiO3 powders were readily sintered at 1000-1200C. Raman-active modes of tetragonal phase BT were detected from Raman spectra of BaTiO3 between 800 0 C to 1200 0 C.

  1. Microemulsion for simultaneous transdermal delivery of benzocaine and indomethacin: in vitro and in vivo evaluation.

    Science.gov (United States)

    El Maghraby, Gamal M; Arafa, Mona F; Osman, Mohamed A

    2014-12-01

    This study investigated simultaneous transdermal delivery of indomethacin and benzocaine from microemulsion. Eucalyptus oil based microemulsion was used with Tween 80 and ethanol being employed as surfactant and cosurfactant, respectively. A microemulsion formulation comprising eucalyptus oil, polyoxyethylene sorbitan momooleate (Tween 80), ethanol and water (20:30:30:20) was selected. Indomethacin (1% w/w) and benzocaine (20% w/w) were incorporated separately or combined into this formulation before in vitro and in vivo evaluation. Application of indomethacin microemulsion enhanced the transdermal flux and reduced the lag time compared to saturated aqueous control. The same trend was evident for benzocaine microemulsion. Simultaneous application of the two drugs in microemulsion provided similar enhancement pattern. The in vivo evaluation employed the pinprick method and revealed rapid anesthesia after application of benzocaine microemulsion with the onset being 10 min and the action lasting for 50 min. For indomethacin microemulsion, the analgesic effect was recorded after 34.5 min and lasted for 70.5 min. Simultaneous application of benzocaine and indomethacin provided synergistic effect. The onset of action was achieved after 10 min and lasted for 95 min. The study highlighted the potential of microemulsion formulation in simultaneous transdermal delivery of two drugs.

  2. Bioremediation of diesel fuel contaminated soil: effect of non ionic surfactants and selected bacteria addition.

    Science.gov (United States)

    Collina, Elena; Lasagni, Marina; Pitea, Demetrio; Franzetti, Andrea; Di Gennaro, Patrizia; Bestetti, Giuseppina

    2007-09-01

    Aim of this work was to evaluate influence of two commercial surfactants and inoculum of selected bacteria on biodegradation of diesel fuel in different systems. Among alkyl polyethossilates (Brij family) and sorbitan derivates (Tween family) a first selection of surfactants was performed by estimation of Koc and Dafnia magna EC50 with molecular descriptor and QSAR model. Further experiments were conducted to evaluate soil sorption, biodegradability and toxicity. In the second part of the research, the effect of Brij 56, Tween 80 and selected bacteria addition on biodegradation of diesel fuel was studied in liquid cultures and in slurry and solid phase systems. The latter experiments were performed with diesel contaminated soil in bench scale slurry phase bioreactor and solid phase columns. Tween 80 addition increased the biodegradation rate of hydrocarbons both in liquid and in slurry phase systems. Regarding the effect of inoculum, no enhancement of biodegradation rate was observed neither in surfactant added nor in experiments without addition. On the contrary, in solid phase experiments, inoculum addition resulted in enhanced biodegradation compared to surfactant addition.

  3. Bioremediation of Diesel Fuel Contaminated Soil: Effect of Non Ionic Surfactants and Selected Bacteria Addition

    International Nuclear Information System (INIS)

    Collina, E.; Lasagni, M.; Pitea, D.; Franzetti, A.; Di Gennaro, P.; Bestetti, G.

    2007-01-01

    Aim of this work was to evaluate influence of two commercial surfactants and inoculum of selected bacteria on biodegradation of diesel fuel in different systems. Among alkyl polyethossilates (Brij family) and sorbitan derivates (Tween family) a first selection of surfactants was performed by estimation of Koc and Dafnia magna EC 50 with molecular descriptor and QSAR model. Further experiments were conducted to evaluate soil sorption, biodegradability and toxicity. In the second part of the research, the effect of Brij 56, Tween 80 and selected bacteria addition on biodegradation of diesel fuel was studied in liquid cultures and in slurry and solid phase systems. The latter experiments were performed with diesel contaminated soil in bench scale slurry phase bioreactor and solid phase columns. Tween 80 addition increased the biodegradation rate of hydrocarbons both in liquid and in slurry phase systems. Regarding the effect of inoculum, no enhancement of biodegradation rate was observed neither in surfactant added nor in experiments without addition. On the contrary, in solid phase experiments, inoculum addition resulted in enhanced biodegradation compared to surfactant addition

  4. Citrem Modulates Internal Nanostructure of Glyceryl Monooleate Dispersions and Bypasses Complement Activation

    DEFF Research Database (Denmark)

    Wibroe, Peter P; Mat Azmi, Intan Diana Binti; Nilsson, Christa

    2015-01-01

    Lyotropic non-lamellar liquid crystalline (LLC) aqueous nanodispersions hold a great promise in drug solubilization and delivery, but these nanosystems often induce severe hemolysis and complement activation, which limit their applications for safe intravenous administration. Here, we engineer an...

  5. A mucoadhesive in situ gel delivery system for paclitaxel.

    Science.gov (United States)

    Jauhari, Saurabh; Dash, Alekha K

    2006-06-02

    MUC1 gene encodes a transmembrane mucin glycoprotein that is overexpressed in human breast cancer and colon cancer. The objective of this study was to develop an in situ gel delivery system containing paclitaxel (PTX) and mucoadhesives for sustained and targeted delivery of anticancer drugs. The delivery system consisted of chitosan and glyceryl monooleate (GMO) in 0.33M citric acid containing PTX. The in vitro release of PTX from the gel was performed in presence and absence of Tween 80 at drug loads of 0.18%, 0.30%, and 0.54% (wt/wt), in Sorensen's phosphate buffer (pH 7.4) at 37 degrees C. Different mucin-producing cell lines (Calu-3>Caco-2) were selected for PTX transport studies. Transport of PTX from solution and gel delivery system was performed in side by side diffusion chambers from apical to basal (A-B) and basal to apical (B-A) directions. In vitro release studies revealed that within 4 hours, only 7.61% +/- 0.19%, 12.0% +/- 0.98%, 31.7% +/- 0.40% of PTX were released from 0.18%, 0.30%, and 0.54% drug-loaded gel formulation, respectively, in absence of Tween 80. However, in presence of surfactant (0.05% wt/vol) in the dissolution medium, percentages of PTX released were 28.1% +/- 4.35%, 44.2% +/- 6.35%, and 97.1% +/- 1.22%, respectively. Paclitaxel has shown a polarized transport in all the cell monolayers with B-A transport 2 to 4 times higher than in the A-B direction. The highest mucin-producing cell line (Calu-3) has shown the lowest percentage of PTX transport from gels as compared with Caco-2 cells. Transport of PTX from mucoadhesive gels was shown to be influenced by the mucin-producing capability of cell.

  6. Preparation and Oxidation Stability Evaluation of Tea Polyphenols-Loaded Inverse Micro-Emulsion.

    Science.gov (United States)

    Lan, Xiaohong; Sun, Jingjing; Yang, Ying; Chen, Mengjie; Liu, Jianhua; Wu, Jinhong; Wang, Zhengwu

    2017-05-01

    Compared to synthetic antioxidants, tea polyphenols (TPs) has its own advantages in edible oil industry, however, the hydrophilic properties have restricted its applications. In this study, the ternary phase diagram of TPs-loaded micro-emulsion (ME) system was constructed, in which glyceryl monooleate (GMO), Tween80, linoleic acid as the surfactants, ethanol as the co-surfactant and soybean, corn, sunflower oil as the oil phase, have been used for the preparation of ME. The results indicated that a composition of ME (57.5% oil, 18% Tween80, 18% GMO, 4% Linolic acid, and 2.5% water+ethanol) could dissolve maximum water and could stable for 2 mo at room temperature with an average diameter of 6 to 7 nm, as detected by means of dynamic light scattering (DLS). The loaded of TPs into ME led to an increase of particle size to 15 to 16 nm, due to increased polarity of the water phase. The antioxidant capacity of TPs in ME was characterized by the peroxide value (POV) method. The addition of 1% water phase with 0.1 g/mL TPs could retain the POV at low value for 30 d at accelerating temperature 50 °C. Meanwhile, comparing the three edible oil, ME with corn oil has lower conductivity and higher value of POV during the storage. This work provides an efficient and environmentally friendly approach for the preparation of TPs-loaded ME, which is beneficial to the application of TPs in edible oil. © 2017 Institute of Food Technologists®.

  7. Nanocrystalline TiO{sub 2} photocatalytic membranes with a hierarchical mesoporous multilayer structure: synthesis, characterization, and multifunction

    Energy Technology Data Exchange (ETDEWEB)

    Choi, H.; Dionysiou, D.D. [Department of Civil and Environmental Engineering, University of Cincinnati, Cincinnati, OH 45221-0071 (United States); Sofranko, A.C. [Department of Chemical Engineering, University of Virginia, Charlottesville, VA 22904-4741 (United States)

    2006-05-19

    A novel sol-gel dip-coating process to fabricate nanocrystalline TiO{sub 2} photocatalytic membranes with a robust hierarchical mesoporous multilayer and improved performance has been studied. Various titania sols containing poly(oxyethylenesorbitan monooleate) (Tween 80) surfactant as a pore-directing agent to tailor-design the porous structure of TiO{sub 2} materials at different molar ratios of Tween 80/isopropyl alcohol/acetic acid/titanium tetraisopropoxide = R:45:6:1 have been synthesized. The sols are dip-coated on top of a homemade porous alumina substrate to fabricate TiO{sub 2}/Al{sub 2}O{sub 3} composite membranes, dried, and calcined, and this procedure is repeated with varying sols in succession. The resulting asymmetric mesoporous TiO{sub 2} membrane with a thickness of 0.9 {mu}m exhibits a hierarchical change in pore diameter from 2-6, through 3-8, to 5-11 nm from the top to the bottom layer. Moreover, the corresponding porosity is incremented from 46.2, through 56.7, to 69.3 %. Compared to a repeated-coating process using a single sol, the hierarchical multilayer process improves water permeability significantly without sacrificing the organic retention and photocatalytic activity of the TiO{sub 2} membranes. The prepared TiO{sub 2} photocatalytic membrane has great potential in developing highly efficient water treatment and reuse systems, for example, decomposition of organic pollutants, inactivation of pathogenic microorganisms, physical separation of contaminants, and self-antifouling action because of its multifunctional capability. (Abstract Copyright [2006], Wiley Periodicals, Inc.)

  8. Surfactant-enhanced solubilization of residual dodecane in soil columns. 2. Mathematical modeling

    International Nuclear Information System (INIS)

    Abriola, L.M.; Dekker, T.J.; Pennell, K.D.

    1993-01-01

    A mathematical model is developed to describe surfactant-enhanced solubilization of nonaqueous-phase liquids (NAPLs) in porous media. The model incorporates aqueous-phase transport equations for organic and surfactant components as well as a mass balance for the organic phase. Rate-limited solubilization and surfactant sorption are represented by a linear driving force expression and a Langmuir isotherm, respectively. The model is implemented in a one-dimensional Galerkin finite element simulator which idealizes the entrapped residual organic as a collection of spherical globules. Soil column data for the solubilization of residual dodecane by an aqueous solution of polyoxyethylene (20) sorbitan monooleate are used to evaluate the conceptual model. Input parameters were obtained, where possible, from independent batch experiments. Calibrated model simulations exhibit good agreement with measured effluent concentrations, supporting the utility of the conceptual modeling approach. Sensitivity analyses explore the influence of surfactant concentration and flushing strategy on NAPL recovery. 45 refs., 6 figs., 3 tabs

  9. Synthesis and Characterization of Mn–C–Codoped TiO2 Nanoparticles and Photocatalytic Degradation of Methyl Orange Dye under Sunlight Irradiation

    Directory of Open Access Journals (Sweden)

    Wei Xin

    2012-01-01

    Full Text Available Novel visible-light-active Mn–C–TiO2 nanoparticles were synthesized by modified sol-gel method based on the self-assembly technique using polyoxyethylenes orbitan monooleate (Tween 80 as template and carbon precursor and manganese acetate as manganese precursor. The samples were characterized by XRD, FTIR, UV-vis diffuse reflectance, XPS, and laser particle size analysis. The XRD results showed that Mn–C–TiO2 sample exhibited anatase phase and no other crystal phase was identified. High specific surface area, small crystallite size, and small particle size distribution could be obtained by manganese and carbon codoped and Mn–C–TiO2 exhibited greater red shift in absorption edge of samples in visible region than that of C–TiO2 and pure TiO2. The photocatalytic activity of synthesized catalyst was evaluated by photocatalytic oxidation of methyl orange (MO solution under the sunlight irradiation. The results showed that Mn–C–TiO2 nanoparticles have higher activity than other samples under sunlight, which could be attributed to the high specific surface area, smaller particle size, and lower band gap energy.

  10. Iron Nanoparticles-Encapsulating Silica Microspheres for Arterial Embolization Hyperthermia

    Energy Technology Data Exchange (ETDEWEB)

    Li, Z; Kawashita, M, E-mail: zhixia@ecei.tohoku.ac.jp [Graduate School of Biomedical Engineering, Tohoku University (Japan)

    2011-10-29

    We attempted to prepare {alpha}-Fe-encapsulating silica ({alpha}FeSi) microspheres by a sol-gel process using tetramethoxysilane (TMOS) in water-in-oil emulsion. The effect of preparation conditions on the structure, magnetic and heating properties of resultant products were investigated. Oil phase consisted of kerosene with 32 wt% of surfactants (sorbitan monooleate / sorbitan monostearate in 3:1 weight ratio). Water phase consisted of TMOS, ethanol (CH{sub 2}CH{sub 3}OH), water and iron nitrate (Fe(NO{sub 3}){sub 3{center_dot}}9H{sub 2}O) with TMOS / CH{sub 2}CH{sub 3}OH/H{sub 2}O/Fe{sup 3+} in 1:7.4:16.2:0.4{approx}1.2 molar ratio. Fe{sup 3+}-containing silica gel (FeSiG) microspheres 5 to 30 {mu}m in size were successfully obtained by adding the water phase into the oil phase at 60 deg. C under stirring of 1500 rpm for 100 min. {alpha}FeSi microspheres was obtained by heating the FeSiG microspheres at 850deg. C in argon atmosphere. The obtained {alpha}FeSi microspheres have a saturation magnetization (Ms) up to 21 emu g{sup -1} and a coercive force (Hc) of 133 Oe. The in vitro heating generation was evaluated under an alternating current (AC) magnetic field of 300 Oe and 100 kHz.

  11. Effects of various polyoxyethylene sorbitan monooils (Tweens) and sodium dodecyl sulfate on reflux synthesis of copper nanoparticles

    International Nuclear Information System (INIS)

    Zhang Xifeng; Yin Hengbo; Cheng Xiaonong; Hu Huifeng; Yu Qi; Wang Aili

    2006-01-01

    Size-controlled synthesis of phase pure Cu nanoparticles was carried out by using copper sulfate pentahydrate as a precursor, ascorbic acid as a reductant, Tweens and sodium dodecyl sulfate (SDS) as modifiers in an aqueous solution at 80 deg. C. The as-prepared Cu nanoparticles were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and Fourier transform infrared (FT-IR). The stabilizing effects of SDS and Tweens on the Cu nanoparticles should be through the coordination between Cu nanoparticles and the respective sulfate group and oxygen-containing bond. The synergic effect of the composite SDS and Tweens on Cu nanoparticles was different from those arising from the individuals

  12. Preparation, Characterization and Performance Studies of Active PVDF Ultrafiltration-Surfactants Membranes Containing PVP as Additive

    International Nuclear Information System (INIS)

    Nur Izzah Md Fadilah; Abdul Rahman Hassan

    2016-01-01

    The role of surfactants in the formation of active Poly(vinylidene fluoride) (PVDF) ultrafiltration (AUF) membranes was studied. The effect combination of surfactants that are Sodium dodecyl sulfate (SDS)/ Tween 80 and Tween 80/ Triton X-100 formulations on performance and morphological structures were investigated for the first time. The influence of surfactants blends on the membrane pores was also examined. Experimental data showed that combination of Tween 80/ Triton X-100 give the highest BSA permeation flux with a value of 285.51 Lm -2 h -1 . With combination of SDS/ Tween 80, the AUF membrane showed the highest protein rejection up to 93 % and 79 % for Bovine Serum Albumin (BSA) and Egg Albumin (EA), respectively. Moreover, membranes characterization demonstrated that the addition of SDS/ Tween 80 and Tween 80/ Triton X-100 were found to affect the performance, surface morphologies and membrane pores of AUF PVDF membranes. (author)

  13. Development and evaluation of exemestane-loaded lyotropic liquid crystalline gel formulations.

    Science.gov (United States)

    Musa, Muhammad Nuh; David, Sheba Rani; Zulkipli, Ihsan Nazurah; Mahadi, Abdul Hanif; Chakravarthi, Srikumar; Rajabalaya, Rajan

    2017-01-01

    Introduction: The use of liquid crystalline (LC) gel formulations for drug delivery has considerably improved the current delivery methods in terms of bioavailability and efficacy. The purpose of this study was to develop and evaluate LC gel formulations to deliver the anti-cancer drug exemestane through transdermal route. Methods: Two LC gel formulations were prepared by phase separation coacervation method using glyceryl monooleate (GMO), Tween 80 and Pluronic® F127 (F127). The formulations were characterized with regard to encapsulation efficiency (EE), vesicle size, Fourier transform infrared (FTIR) spectroscopy, surface morphology (using light and fluorescence microscopy), in vitro release, ex vivo permeation, in vitro effectiveness test on MDA-MB231 cancer cell lines and histopathological analysis. Results: Results exhibited that the EE was 85%-92%, vesicle size was 119.9-466.2 nm while morphology showed spherical vesicles after hydration. An FTIR result also revealed that there was no significant shift in peaks corresponding to Exemestane and excipients. LC formulations release the drug from cellulose acetate and Strat-MTM membrane from 15%-88.95%, whereas ex vivo permeation ranges from 37.09-63%. The in vitro effectiveness study indicated that even at low exemestane concentrations (12.5 and 25 μg/mL) the formulations were able to induce cancer cell death, regardless of the surfactant used. Histopathological analysis thinning of the epidermis as the formulations penetrate into the intercellular regions of squamous cells. Conclusion: The results conjectured that exemestane could be incorporated into LC gels for the transdermal delivery system and further preclinical studies such as pharmacokinetic and pharmacodynamic studies will be carried out with suitable animal models.

  14. Magnetic SiO{sub 2} gel microspheres for arterial embolization hyperthermia

    Energy Technology Data Exchange (ETDEWEB)

    Li Zhixia; Kawashita, Masakazu [Graduate School of Biomedical Engineering, Tohoku University, 6-6-11-1306-1, Aramaki-Aoba, Aoba-ku, Sendai 980-8579 (Japan); Araki, Norio [National Hospital Organization Kyoto Medical Center, Kyoto 612-8555 (Japan); Mitsumori, Michihide; Hiraoka, Masahiro [Graduate School of Medicine, Kyoto University, Kyoto 606-8507 (Japan); Doi, Masaaki, E-mail: zhixia@ecei.tohoku.ac.j, E-mail: zhixiali@hotmail.co [Graduate School of Engineering, Tohoku University, Sendai 980-8579 (Japan)

    2010-12-15

    We have prepared magnetic SiO{sub 2} microspheres with a diameter of 20-30 {mu}m as thermoseeds for hyperthermia of cancer. These were prepared by directly introducing preformed magnetic iron oxide nanoparticles (IONPs) into microspheres of a SiO{sub 2} gel matrix derived from the hydrolysis of tetramethoxysilane (TMOS) in a water-in-oil (W/O) emulsion. Dimethylformamide (DMF) was used as a stabilizer, methanol (CH{sub 3}OH) as a dispersant and ammonia (NH{sub 4}OH) as the catalyst for the formation of the spherical particles in the aqueous phase of the W/O emulsion. The magnetic IONPs were synthesized hydrochemically in an aqueous system composed of ferrous chloride, sodium nitrate and sodium hydroxide. Mono-dispersed magnetic SiO{sub 2} gel microspheres with a diameter of approximately 20 {mu}m were successfully obtained by adding a determined amount of solution with a molar ratio of TMOS/DMF/CH{sub 3}OH/H{sub 2}O/NH{sub 4}OH = 1:1.4:9:20:0.03 to kerosene with a surfactant (sorbitan monooleate/sorbitan monostearate = 3:1 by weight ratio) that was 30 wt% of the total amount of the oil phase. These were estimated to contain up to 60 wt% of IONPs that consisted mainly of Fe{sub 3}O{sub 4} and showed a higher specific absorption rate (SAR = 27.9-43.8 W g{sup -1}) than that of the starting IONPs (SAR = 25.3 W g{sup -1}) under an alternating current magnetic field of 300 Oe and 100 kHz.

  15. Magnetic SiO2 gel microspheres for arterial embolization hyperthermia

    International Nuclear Information System (INIS)

    Li Zhixia; Kawashita, Masakazu; Araki, Norio; Mitsumori, Michihide; Hiraoka, Masahiro; Doi, Masaaki

    2010-01-01

    We have prepared magnetic SiO 2 microspheres with a diameter of 20-30 μm as thermoseeds for hyperthermia of cancer. These were prepared by directly introducing preformed magnetic iron oxide nanoparticles (IONPs) into microspheres of a SiO 2 gel matrix derived from the hydrolysis of tetramethoxysilane (TMOS) in a water-in-oil (W/O) emulsion. Dimethylformamide (DMF) was used as a stabilizer, methanol (CH 3 OH) as a dispersant and ammonia (NH 4 OH) as the catalyst for the formation of the spherical particles in the aqueous phase of the W/O emulsion. The magnetic IONPs were synthesized hydrochemically in an aqueous system composed of ferrous chloride, sodium nitrate and sodium hydroxide. Mono-dispersed magnetic SiO 2 gel microspheres with a diameter of approximately 20 μm were successfully obtained by adding a determined amount of solution with a molar ratio of TMOS/DMF/CH 3 OH/H 2 O/NH 4 OH = 1:1.4:9:20:0.03 to kerosene with a surfactant (sorbitan monooleate/sorbitan monostearate = 3:1 by weight ratio) that was 30 wt% of the total amount of the oil phase. These were estimated to contain up to 60 wt% of IONPs that consisted mainly of Fe 3 O 4 and showed a higher specific absorption rate (SAR = 27.9-43.8 W g -1 ) than that of the starting IONPs (SAR = 25.3 W g -1 ) under an alternating current magnetic field of 300 Oe and 100 kHz.

  16. The in-situ decontamination of sand and gravel aquifers by chemically enhanced solubilization of multiple-compound DNAPLs with surfactant solutions: Phase 1 -- Laboratory and pilot field-scale testing and Phase 2 -- Solubilization test and partitioning and interwell tracer tests. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-24

    Laboratory, numerical simulation, and field studies have been conducted to assess the potential use of micellar-surfactant solutions to solubilize chlorinated solvents contaminating sand and gravel aquifers. Ninety-nine surfactants were screened for their ability to solubilize trichloroethene (TCE), perchloroethylene (PCE), and carbon tetrachloride (CTET). The field test was conducted in the alluvial aquifer which is located 20 to 30 meters beneath a vapor degreasing operation at Paducah Gaseous Diffusion Plant. This aquifer has become contaminated with TCE due to leakage of perhaps 40,000 liters of TCE, which has generated a plume of dissolved TCE extending throughout an area of approximately 3 km{sup 2} in the aquifer. Most of the TCE is believed to be present in the overlying lacustrine deposits and in the aquifer itself as a dense, non-aqueous phase liquid, or DNAPL. The objective of the field test was to assess the efficacy of the surfactant for in situ TCE solubilization. Although the test demonstrated that sorbitan monooleate was unsuitable as a solubilizer in this aquifer, the single-well test was demonstrated to be a viable method for the in situ testing of surfactants or cosolvents prior to proceeding to full-scale remediation.

  17. Microemulsion-loaded hydrogel formulation of butenafine hydrochloride for improved topical delivery.

    Science.gov (United States)

    Pillai, Anilkumar B; Nair, Jyothilaksmi V; Gupta, Nishant Kumar; Gupta, Swati

    2015-09-01

    Topical microemulsion systems for the antifungal drug, butenafine hydrochloride (BTF) were designed and developed to overcome the problems associated with the cutaneous delivery due to poor water solubility. The solubility of BTF in oils, surfactants and co-surfactants was evaluated to screen the components of the microemulsion. Isopropyl palmitate was used as the oil phase, aerosol OT as the surfactant and sorbitan monooleate as co-surfactant. The pseudoternary diagrams were constructed to identify the area of microemulsion existence and optimum systems were designed. The systems were assessed for drug-loading efficiency and characterized for pH, robustness to dilution, globule size, drug content and stability. Viscosity analysis, spreadability, drug content assay, ex vivo skin permeation study and antifungal activity assay were performed for the optimized microemulsion-loaded hydrogel. The optimized BTF microemulsion had a small and uniform globule size. The incorporation of microemulsion system into Carbopol 940 gel was found to be better as compared to sodium alginate or hydroxyl propyl methyl cellulose (HPMC K4 M) gel. The developed gel has shown better ex vivo skin permeation and antifungal activity when compared to marketed BTF cream. Thus, the results provide a basis for the successful delivery of BTF from microemulsion-loaded hydrogel formulation, which resulted in improved penetration of drug and antifungal activity in comparison with commercial formulation of BTF.

  18. Comparison of the tribology performance of nano-diesel soot and graphite particles as lubricant additives

    International Nuclear Information System (INIS)

    Zhang, Zu-chuan; Cai, Zhen-bing; Peng, Jin-fang; Zhu, Min-hao

    2016-01-01

    The tribology behavior of exhaust diesel soot as a lubricant additive was investigated and then compared with that of a selection of commercial nano-graphite particles. Specifically, 0.01 wt% particles were dispersed in PAO4 oil with 1 wt% sorbitan monooleate (Span 80) as a dispersing agent, and wear tests based on the ball against plate mode were conducted at various temperatures. Different analytical techniques (e.g. transmission electron, scanning electron and infrared microscopy; energy dispersive x-ray and Raman spectroscopy; and charge measurement) were employed to characterize the chemistry and morphology of the additives and their tribology performance. The oil containing only 0.01 wt% diesel soot clearly improved wear resistance over 60 °C. In particular, at 100 °C the wear rate decreased by approximately 90% compared to the function of base oil. In the same test conditions, diesel soot exhibited better anti-wear performance than nano-graphite at high temperatures. The potential measure showed that the nano-graphite had positive charge and the diesel soot had negative charge. Electrochemical action may play an important role in the lubricant mechanisms of diesel soot and graphite as oil additives. (paper)

  19. Interfacial adsorption and surfactant release characteristics of magnetically functionalized halloysite nanotubes for responsive emulsions.

    Science.gov (United States)

    Owoseni, Olasehinde; Nyankson, Emmanuel; Zhang, Yueheng; Adams, Daniel J; He, Jibao; Spinu, Leonard; McPherson, Gary L; Bose, Arijit; Gupta, Ram B; John, Vijay T

    2016-02-01

    Magnetically responsive oil-in-water emulsions are effectively stabilized by a halloysite nanotube supported superparamagnetic iron oxide nanoparticle system. The attachment of the magnetically functionalized halloysite nanotubes at the oil-water interface imparts magnetic responsiveness to the emulsion and provides a steric barrier to droplet coalescence leading to emulsions that are stabilized for extended periods. Interfacial structure characterization by cryogenic scanning electron microscopy reveals that the nanotubes attach at the oil-water interface in a side on-orientation. The tubular structure of the nanotubes is exploited for the encapsulation and release of surfactant species that are typical of oil spill dispersants such as dioctyl sulfosuccinate sodium salt and polyoxyethylene (20) sorbitan monooleate. The magnetically responsive halloysite nanotubes anchor to the oil-water interface stabilizing the interface and releasing the surfactants resulting in reduction in the oil-water interfacial tension. The synergistic adsorption of the nanotubes and the released surfactants at the oil-water interface results in oil emulsification into very small droplets (less than 20μm). The synergy of the unique nanotubular morphology and interfacial activity of halloysite with the magnetic properties of iron oxide nanoparticles has potential applications in oil spill dispersion, magnetic mobilization and detection using magnetic fields. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. Phytotoxicity of citric acid and Tween® 80 for potential use as soil amendments in enhanced phytoremediation.

    Science.gov (United States)

    Agnello, A C; Huguenot, D; van Hullebusch, E D; Esposito, G

    2015-01-01

    Enhanced phytoremediation adding biodegradable amendments like low molecular weight organic acids and surfactants is an interesting area of current research to overcome the limitation that represents low bioavailability of pollutants in soils. However, prior to their use in assisted phytoremediation, it is necessary to test if amendments per se exert any toxic effect to plants and to optimize their application mode. In this context, the present study assessed the effects of citric acid and Tween® 80 (polyethylene glycol sorbitan monooleate) on the development of alfalfa (Medicago sativa) plants, as influenced by their concentration and frequency of application, in order to evaluate the feasibility for their future use in enhanced phytoremediation of multi-contaminated soils. The results showed that citric acid negatively affected plant germination, while it did not have any significant effect on biomass or chlorophyll content. In turn, Tween® 80 did not affect plant germination and showed a trend to increase biomass, as well as it did not have any significant effect on chlorophyll levels. M. sativa appeared to tolerate citric acid and Tween® 80 at the tested concentrations, applied weekly. Consequently, citric acid and Tween® 80 could potentially be utilized to assist phytoremediation of contaminated soils vegetated with M. sativa.

  1. UV-induced polymerization of size-controlled platinum/poly[styrene-divinylbenzene-tri(propylene glycol) diacrylate] hydrophobic catalyst beads in microfluidics

    International Nuclear Information System (INIS)

    Wi, Jun; Li, Xiang; Song, Tong; Song, Zi Fan; Chang, Zhen Qi; Meng, Da Qiao

    2015-01-01

    The catalytic exchange of hydrogen isotopes between hydrogen and water has been known to be a very useful process for the separation of tritium from tritiated water. For the process, a highly active hydrophobic catalyst is needed. This study provides an effective fabrication method of size-controlled platinum/poly[styrene-divinylbenzene-tri(propylene glycol) diacrylate] [Pt/poly(SDB-TPGDA)] hydrophobic catalyst beads with a narrow size distribution. Platinum nanoparticles were prepared by γ-ray-induced reduction in the aqueous phase first, and then uniformly dispersed in SDB-TPGDA comonomer after the hydrophobization of platinum nanoparticles with alkylamine stabilizers. The porous Pt/poly(SDB-TPGDA) hydrophobic catalyst beads were synthesized by the UV-initiated polymerization of the mixture droplets prepared in a capillary-based microfluidic system. The size of as-prepared catalyst beads can be controlled in the range of 200-1,000 μm by adjusting the flow rate of dispersed and continuous phases, as well as the viscosity of the continuous phase. Sorbitan monooleate and cyclohexanol were used as coporogens to control the porosities of the catalyst beads

  2. Hypoglycaemic and hypolipidaemic effects of crude extracts and chromatographic fractions of Morinda morindoides root bark in diabetic rats

    Directory of Open Access Journals (Sweden)

    Johnny Olufemi Olukunle

    2012-01-01

    Full Text Available Hypoglycaemic and hypolipidaemic effects of different extracts and fractions of root bark from the plant Morinda morindoides (Baker Milne-Redh of the family Rubiaceae were evaluated in alloxan-induced diabetic rats. The aqueous and methanolic extracts were administered to 48 rats orally at a dose of 400 mg·kg-1 for 21 days. Fractions (hydromethanol, hexane, chloroform and ethyl acetate from bio-activity guided fractionation and chromatographic sub fractions (CsF A-F from accelerated gradient chromatography were also evaluated in 45 rats for the hypoglycaemic activity at doses of 400 mg·kg-1, 200 mg·kg-1 and 100 mg·kg-1 of solvent fractions and (CsF A-F, respectively. Glibenclamide was used as positive control. Polyoxyethylene sorbitan monooleate and distilled water administered to rats were used as negative controls. The dose of 400 mg·kg-1 of aqueous and methanolic extracts and 100 mg·kg-1 of chloroform CsF B of Morinda morindoides caused (62.8%, 56% and 74%, respectively reductions in blood glucose level (BGL. The aqueous extract caused significant (P -1, low density lipoprotein (66.38 ± 2.5 mg·dl-1 and significant (P -1 when compared to the control. These results confirm the folkloric claim of the hypoglycaemic and hypolipidaemic activities of Morinda morindoides root bark.

  3. UV-induced polymerization of size-controlled platinum/poly[styrene-divinylbenzene-tri(propylene glycol) diacrylate] hydrophobic catalyst beads in microfluidics

    Energy Technology Data Exchange (ETDEWEB)

    Wi, Jun; Li, Xiang; Song, Tong; Song, Zi Fan; Chang, Zhen Qi [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei (China); Meng, Da Qiao [Si Chuan Institute of Materials and Technology, Jiang You (China)

    2015-10-15

    The catalytic exchange of hydrogen isotopes between hydrogen and water has been known to be a very useful process for the separation of tritium from tritiated water. For the process, a highly active hydrophobic catalyst is needed. This study provides an effective fabrication method of size-controlled platinum/poly[styrene-divinylbenzene-tri(propylene glycol) diacrylate] [Pt/poly(SDB-TPGDA)] hydrophobic catalyst beads with a narrow size distribution. Platinum nanoparticles were prepared by γ-ray-induced reduction in the aqueous phase first, and then uniformly dispersed in SDB-TPGDA comonomer after the hydrophobization of platinum nanoparticles with alkylamine stabilizers. The porous Pt/poly(SDB-TPGDA) hydrophobic catalyst beads were synthesized by the UV-initiated polymerization of the mixture droplets prepared in a capillary-based microfluidic system. The size of as-prepared catalyst beads can be controlled in the range of 200-1,000 μm by adjusting the flow rate of dispersed and continuous phases, as well as the viscosity of the continuous phase. Sorbitan monooleate and cyclohexanol were used as coporogens to control the porosities of the catalyst beads.

  4. The in-situ decontamination of sand and gravel aquifers by chemically enhanced solubilization of multiple-component DNAPLS with surfactant solutions. Topical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    Laboratory, numerical simulation, and field studies have been conducted to assess the potential use of micellar-surfactant solutions to solubilize chlorinated solvents contaminating sand and gravel aquifers. Laboratory studies were conducted at the State University of New York at Buffalo (SUNY) while numerical simulation and field work were undertaken by INTERA Inc. in collaboration with Martin Marietta Energy Systems Inc. at the Paducah Gaseous Diffusion Plant (PGDP) in Kentucky. Ninety-nine surfactants were screened for their ability to solubilize trichloroethene (TCE), perchloroethylene (PCE), and carbon tetrachloride (CTET). Ten of these were capable of solubilizing TCE to concentrations greater than 15,000 mg/L, compared to its aqueous solubility of 1,100 mg/L. Four surfactants were identified as good solubilizers of all three chlorinated solvents. Of these, a secondary alcohol ethoxylate was the first choice for in situ testing because of its excellent solubilizing ability and its low propensity to sorb. However, this surfactant did not meet the Commonwealth of Kentucky`s acceptance criteria. Consequently, it was decided to use a surfactant approved for use by the Food and Drug Administration as a food-grade additive. As a 1% micellar-surfactant solution, this sorbitan monooleate has a solubilization capacity of 16,000 mg TCE/L, but has a higher propensity to sorb to clays than has the alcohol ethoxylate.

  5. The in-situ decontamination of sand and gravel aquifers by chemically enhanced solubilization of multiple-compound DNAPLs with surfactant solutions. Phase 1: Laboratory and pilot field-scale testing. Phase 2: Solubilization test and partitioning interwell tracer tests. Final report

    International Nuclear Information System (INIS)

    1997-01-01

    Laboratory, numerical simulation, and field studies have been conducted to assess the potential use of micellar-surfactant solutions to solubilize chlorinated solvents contaminating sand and gravel aquifers. Ninety-nine surfactants were screened for their ability to solubilize trichloroethene (TCE), perchloroethylene (PCE), and carbon tetrachloride (CTET). The field test was conducted in the alluvial aquifer which is located 20 to 30 meters beneath a vapor degreasing operation at Paducah Gaseous Diffusion Plant. This aquifer has become contaminated with TCE due to leakage of perhaps 40,000 liters of TCE, which has generated a plume of dissolved TCE extending throughout an area of approximately 3 km 2 in the aquifer. Most of the TCE is believed to be present in the overlying lacustrine deposits and in the aquifer itself as a dense, non-aqueous phase liquid, or DNAPL. The objective of the field test was to assess the efficacy of the surfactant for in situ TCE solubilization. Although the test demonstrated that sorbitan monooleate was unsuitable as a solubilizer in this aquifer, the single-well test was demonstrated to be a viable method for the in situ testing of surfactants or cosolvents prior to proceeding to full-scale remediation

  6. Multielement preconcentration of trace heavy metals in seawater with an emulsion containing 8-quinolinol for graphite-furnace atomic absorption spectrometry

    International Nuclear Information System (INIS)

    Matsumiya, Hiroaki; Kageyama, Tomohiro; Hiraide, Masataka

    2004-01-01

    A water-in-oil type emulsion containing 8-quinolinol has been used for the concentration of traces of heavy metals from seawater prior to their determinations by graphite-furnace atomic absorption spectrometry. The emulsion used was prepared by dissolving 40 mg of 8-quinolinol and 60 mg of sorbitan monooleate (Span-80) in 3.0 ml of toluene and vigorously mixing with 0.70 ml of aqueous hydrochloric acid solution (1.5 mol l -1 ) by ultrasonic irradiation. The resulting emulsion was gradually injected into 100 ml of sample solution (pH 8.5) and dispersed by stirring as numerous tiny globules. Four heavy metals (Co, Ni, Cu, and Cd) in the sample solution were quantitatively transported through the organic layer into the acidic aqueous droplets encapsulated in the emulsion. After collecting the dispersed emulsion globules, they were demulsified by heating and the heavy metals in the segregated aqueous phase were determined by atomic absorption spectrometry. Owing to the highly efficient concentration (100-fold), these heavy metals at sub-ng ml -1 levels in seawater were determined with satisfactory accuracy and precision, being confirmed with certified reference samples

  7. BENCH-SCALE VISUALIZATION OF DNAPL REMEDIATION PROCESSES IN ANALOG HETEROGENEOUS AQUIFERS: SURFACTANT FLOODS, AND IN SITU OXIDATION USING PERMANGANATE

    Science.gov (United States)

    We have conducted well-controlled DNAPL remediation experiments using surfactants (Aerosol MA and Tween 80) to increase solubility and an oxidant (permanganate) to chemically degrade the DNAPL. Photographs and digital image analysis illustrate previously unobserved interactions b...

  8. Development and Evaluation of Floating Microspheres of Curcumin

    African Journals Online (AJOL)

    including anti-inflammatory, antibacterial, antifungal, anticancer .... hydrochloric acid containing 0.02 % Tween. 80. ... experiments were performed in triplicate. Cumulative ... Table 4: In-vitro drug release kinetics of the formulations. Zero order.

  9. Identification of a new strain of Actinomadura isolated from Saharan ...

    African Journals Online (AJOL)

    Jane

    2011-10-17

    Oct 17, 2011 ... decomposition, gelatin liquefaction, starch, Tween 80 hydrolysis and nitrate ... ability to grow on glucose-yeast extract agar (GYEA) medium. (Athalye et al. ... The conditions for thermal cycling were as follows: denaturation of.

  10. Cultivation of parasitic leptospires: effect of pyruvate.

    Science.gov (United States)

    Johnson, R C; Walby, J; Henry, R A; Auran, N E

    1973-07-01

    Sodium pyruvate (100 mug/ml) is a useful addition to the Tween 80-albumin medium for the cultivation of parasitic serotypes. It is most effective in promoting growth from small inocula and growth of the nutritionally fastidious serotypes.

  11. The influence of nonionic surfactant Brij 30 on biodegradation of ...

    African Journals Online (AJOL)

    ONOS

    2010-09-06

    Sep 6, 2010 ... polluted air stream using biological process is highly efficient and has low ... Brij 30 was the most biodegradable surfactant among Brij 30, Tween 80 and ... The filter material contained surfactants that would enhance the ...

  12. Study of five strains of Saccharomyces cerevisiae with regard to their metabolism towards geraniol

    Directory of Open Access Journals (Sweden)

    Emilia García-Moruno

    2002-12-01

    The influence of tween 80, added to the medium as a source of oleic acid, on the biosynthesis of citronellol was evaluated as well. The results showed that tween 80 increases the production of citronellol, though no remarkable changes in the consumption of geraniol were observed. It can therefore be concluded that the production of citronellol by yeasts is a minor way of utilizing geraniol when no longer needed for the synthesis of cell fats.

  13. Removal of Radioactive Pollutants by Liquid Emulsion Membrane From Liquid Waste

    International Nuclear Information System (INIS)

    Yossef, Y.A.A.

    2013-01-01

    Radioactive liquid waste should be safely managed because it is potentially hazardous to human health and the environment. Several methods were used for treatment of liquid waste, such as liquid emulsion membrane (LEM). In this work, liquid emulsion membrane using Tri-butyl phosphate (TBP) plus Bis (2-ethylhexyl) phosphate (HDEHP) as mobile carriers, hydrochloric acid (HCl) as stripping agents and an emulsifying agent (span 80) was used for the extraction of uranium ions from radioactive liquid waste. Various parameters influencing the permeation of uranium ions through the membrane have been optimized to separate uranium ions from radioactive liquid waste such as: the effects of membrane material, carrier concentration, operating conditions, etc. were examined; moreover, the transport mechanism of this uranium was also studied. The internal mass transfer in the water/oil (W/O) emulsion drop, the external mass transfer around the drop, the rates of formation, and the decomposition of the complex at the external aqueous-organic interface were considered. The results show that, the liquid emulsion membrane which consists of (25% by volume HDEHP, 0.005 M + 75% by volume TBP, 0.01 M) as extractant (carrier), span 80, 4% (v/v) (sorbitan monooleate) as surfactant agent, hydrochloric acid (HCl), (1.0 M) as stripping agent. From the results, the maximum extraction percent of uranium ions (nearly about of 100%) occurred at the operating conditions: stirring speed =500 rpm, the ratio between LEM and feed phase (liquid waste) = 20 ml: 100 ml, the ratio between organic phase (membrane phase) to internal aqueous phase (stripping phase) = 1.0 and the ph value of the external aqueous phase equal to 5.0.

  14. Evaluation and optimization of pH-responsive niosomes as a carrier for efficient treatment of breast cancer.

    Science.gov (United States)

    Salem, Heba F; Kharshoum, Rasha M; Abo El-Ela, Fatma I; F, Amr Gamal; Abdellatif, Khaled R A

    2018-02-27

    Tamoxifen citrate (TXC) is commonly indicated to prevent cell multiplication and development of breast cancer. However, it is usually associated with limited activity and development of toxicity and resistance. This study aimed to describe an in situ pH-responsive niosomes as a carrier for localized and sustained delivery of TXC. The thin film hydration method was utilized to produce TXC niosomes using sorbitan monostearate and cholesterol of 1:1 Molar ratio. The produced formula displayed nano-spherical shape with entrapment efficiency (EE) of 88.90 ± 0.72% and drug release of 49.2 ± 1.51% within 8 h. This formula was incorporated into chitosan/glyceryl monooleate (CH/GMO) as a localized in situ pH-responsive hydrogel delivery system. Different formulae were produced by Design-Expert software based on user-defined response surface design utilizing different chitosan concentration (A) and GMO concentration (B) characterized for mean viscosity (R 2 ) and in vitro release studies (R 1 ). The results displayed that R 1 was significantly antagonistic with both of A and B while R 2 was significantly synergistic with both of them. The optimum formula was selected and capped with gold as an ideal candidate for computed tomography (CT) to evaluate the efficacy and tissue distribution of TXC utilizing Ehrlich carcinoma mice model. The optimum formula showed localized TXC in a tumour and consequently a significant anti-tumour efficacy compared with free TXC. Based on these outcomes, the novel in situ pH-responsive TXC-loaded noisome could be a promising formula for the efficient treatment of breast cancer.

  15. Lecithin-linker formulations for self-emulsifying delivery of nutraceuticals.

    Science.gov (United States)

    Chu, Jacquelene; Cheng, Yu-Ling; Rao, A Venketeshwer; Nouraei, Mehdi; Zarate-Muñoz, Silvia; Acosta, Edgar J

    2014-08-25

    Lecithin-linker microemulsions are formulations produced with soybean lecithin in combination with a highly lipophilic (lipophilic linker) and highly hydrophilic (hydrophilic linkers) surfactant-like additives. In this work, lecithin-linker systems were formulated to produce self-emulsifying delivery systems for β-carotene and β-sitosterol. The concentration of the lipophilic linker, sorbitan monooleate, was adjusted to minimize the formation of liquid crystals. The concentration of hydrophilic linkers, decaglyceryl caprylate/caprate and PEG-6-caprylic/capric glycerides, was gradually increased (scanned) until single phase clear microemulsions were obtained. For these scans, the oil (ethyl caprate) to water ratio was set to 1. The single phase, clear microemulsions were diluted with fed-state simulated intestinal fluid (FeSSIF) and produced stable emulsions, with drop sizes close to 200 nm. Using pseudo-ternary phase diagrams to evaluate the process of dilution of microemulsion preconcentrates (mixtures of oil, lecithin and linkers with little or no water) with FeSSIF, it was determined that self-emulsifying systems are obtained when the early stages of the dilution produce single phase microemulsions. If liquid crystals or multiple phase systems are obtained during those early stages, then the emulsification yields unstable emulsions with large drop sizes. An in vitro permeability study conducted using a Flow-Thru Dialyzer revealed that stable emulsions with drop sizes of 150-300 nm produce large and irreversible permeation of β-carotene to sheep intestine. On the other hand, unstable emulsions produced without the linker combination separated in the dialyzer chamber. Copyright © 2014 Elsevier B.V. All rights reserved.

  16. Effect of Synthesis Time on Morphology of Hollow Porous Silica Microspheres

    Directory of Open Access Journals (Sweden)

    Qian CHEN

    2012-03-01

    Full Text Available Hollow porous silica microspheres may be applicable as containers for the controlled release in drug delivery systems (DDS, foods, cosmetics, agrochemical, textile industry, and in other technological encapsulation use. In order to control the surface morphological properties of the silica microspheres, the effect of synthesis time on their formation was studied by a method of water-in-oil (W/O emulsion mediated sol-gel techniques. An aqueous phase of water, ammonium hydroxide and a surfactant Tween 20 was emulsified in an oil phase of 1-octanol with a stabilizer, hydroxypropyl cellulose (HPC, and a surfactant, sorbitan monooleate (Span 80 with low hydrophile-lipophile balance (HLB value. Tetraethyl orthosilicate (TEOS as a silica precursor was added to the emulsion. The resulting silica particles at different synthesis time 24, 48, and 72 hours were air-dried at room temperature and calcinated at 773 K for 3 hours. The morphology of the particles was characterized by scanning electron microscopy and the particle size distribution was measured by laser diffraction. The specific surface areas were studied by 1-point BET method, and pore sizes were measured by Image Tool Software. Both dense and porous silica microspheres were observed after all three syntheses. Hollow porous silica microspheres were formed at 24 and 48 hours synthesis time. Under base catalyzed sol-gel solution, the size of silica particles was in the range of 5.4 μm to 8.2 μm, and the particles had surface area of 111 m2/g – 380 m2/g. The longer synthesis time produced denser silica spheres with decreased pore sizes.DOI: http://dx.doi.org/10.5755/j01.ms.18.1.1344

  17. Development and statistical optimization of nefopam hydrochloride loaded nanospheres for neuropathic pain using Box–Behnken design

    Directory of Open Access Journals (Sweden)

    S. Sukhbir

    2016-09-01

    Full Text Available Nefopam hydrochloride (NFH is a non-opioid centrally acting analgesic drug used to treat chronic condition such as neuropathic pain. In current research, sustained release nefopam hydrochloride loaded nanospheres (NFH-NS were auspiciously synthesized using binary mixture of eudragit RL 100 and RS 100 with sorbitan monooleate as surfactant by quasi solvent diffusion technique and optimized by 35 Box–Behnken designs to evaluate the effects of process and formulation variables. Fourier transform infrared spectroscopy (FTIR, differential scanning calorimetric (DSC and X-ray diffraction (XRD affirmed absence of drug–polymer incompatibility and confirmed formation of nanospheres. Desirability function scrutinized by design-expert software for optimized formulation was 0.920. Optimized batch of NFH-NS had mean particle size 328.36 nm ± 2.23, % entrapment efficiency (% EE 84.97 ± 1.23, % process yield 83.60 ± 1.31 and % drug loading (% DL 21.41 ± 0.89. Dynamic light scattering (DLS, zeta potential analysis and scanning electron microscopy (SEM validated size, charge and shape of nanospheres, respectively. In-vitro drug release study revealed biphasic release pattern from optimized nanospheres. Korsmeyer Peppas found excellent kinetics model with release exponent less than 0.45. Chronic constricted injury (CCI model of optimized NFH-NS in Wistar rats produced significant difference in neuropathic pain behavior (p < 0.05 as compared to free NFH over 10 h indicating sustained action. Long term and accelerated stability testing of optimized NFH-NS revealed degradation rate constant 1.695 × 10−4 and shelf-life 621 days at 25 ± 2 °C/60% ± 5% RH.

  18. Development and statistical optimization of nefopam hydrochloride loaded nanospheres for neuropathic pain using Box-Behnken design.

    Science.gov (United States)

    Sukhbir, S; Yashpal, S; Sandeep, A

    2016-09-01

    Nefopam hydrochloride (NFH) is a non-opioid centrally acting analgesic drug used to treat chronic condition such as neuropathic pain. In current research, sustained release nefopam hydrochloride loaded nanospheres (NFH-NS) were auspiciously synthesized using binary mixture of eudragit RL 100 and RS 100 with sorbitan monooleate as surfactant by quasi solvent diffusion technique and optimized by 3 5 Box-Behnken designs to evaluate the effects of process and formulation variables. Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetric (DSC) and X-ray diffraction (XRD) affirmed absence of drug-polymer incompatibility and confirmed formation of nanospheres. Desirability function scrutinized by design-expert software for optimized formulation was 0.920. Optimized batch of NFH-NS had mean particle size 328.36 nm ± 2.23, % entrapment efficiency (% EE) 84.97 ± 1.23, % process yield 83.60 ± 1.31 and % drug loading (% DL) 21.41 ± 0.89. Dynamic light scattering (DLS), zeta potential analysis and scanning electron microscopy (SEM) validated size, charge and shape of nanospheres, respectively. In-vitro drug release study revealed biphasic release pattern from optimized nanospheres. Korsmeyer Peppas found excellent kinetics model with release exponent less than 0.45. Chronic constricted injury (CCI) model of optimized NFH-NS in Wistar rats produced significant difference in neuropathic pain behavior ( p  accelerated stability testing of optimized NFH-NS revealed degradation rate constant 1.695 × 10 -4 and shelf-life 621 days at 25 ± 2 °C/60% ± 5% RH.

  19. Citric acid- and Tween(®) 80-assisted phytoremediation of a co-contaminated soil: alfalfa (Medicago sativa L.) performance and remediation potential.

    Science.gov (United States)

    Agnello, A C; Huguenot, D; van Hullebusch, E D; Esposito, G

    2016-05-01

    A pot experiment was designed to assess the phytoremediation potential of alfalfa (Medicago sativa L.) in a co-contaminated (i.e., heavy metals and petroleum hydrocarbons) soil and the influence of citric acid and Tween(®) 80 (polyethylene glycol sorbitan monooleate), applied individually and combined together, for their possible use in chemically assisted phytoremediation. The results showed that alfalfa plants could tolerate and grow in a co-contaminated soil. Over a 90-day experimental time, shoot and root biomass increased and negligible plant mortality occurred. Heavy metals were uptaken by alfalfa to a limited extent, mostly by plant roots, and their concentration in plant tissues were in the following order: Zn > Cu > Pb. Microbial population (alkane-degrading microorganisms) and activity (lipase enzyme) were enhanced in the presence of alfalfa with rhizosphere effects of 9.1 and 1.5, respectively, after 90 days. Soil amendments did not significantly enhance plant metal concentration or total uptake. In contrast, the combination of citric acid and Tween(®) 80 significantly improved alkane-degrading microorganisms (2.4-fold increase) and lipase activity (5.3-fold increase) in the rhizosphere of amended plants, after 30 days of experiment. This evidence supports a favorable response of alfalfa in terms of tolerance to a co-contaminated soil and improvement of rhizosphere microbial number and activity, additionally enhanced by the joint application of citric acid and Tween(®) 80, which could be promising for future phytoremediation applications.

  20. Production, solubility and antioxidant activity of curcumin nanosuspension

    Directory of Open Access Journals (Sweden)

    Deivis de Moraes Carvalho

    2015-03-01

    Full Text Available Curcumin is a powerful bioactive agent and natural antioxidant, but it is practically water-insoluble and has low bioavailability; a possible solution to this obstacle would be formulations of curcumin nanoparticles. Surfactants such as tween 80 can be used to stabilize low-solubility molecules preventing particle aggregation. The objectives of this study were the preparation of a suspension with curcumin nanoparticles in tween 80, the testing of pure curcumin solubility and of a simple mixture of curcumin with tween 80 and nanosuspension in water and ethanol as solvents, and finally the assessment of the antioxidant activity. We prepared the nanosuspension by injecting a curcumin solution in dichloromethane at low flow in water with tween 80 under heating and ultrasound. The analysis of particles size was conducted through dynamic light scattering; the non-degradation of curcumin was verified through thin-layer chromatography. The analyses of antioxidant activity were carried out according to the DPPH method. The method applied to reduce the particles size was efficient. Both the curcumin suspension and nanosuspension in tween 80 increased its solubility. Curcumin and the formulations presented antioxidant activity.

  1. Polysorbate 80 and low-osmolality water-soluble contrast medium enema in diagnosis and treatment of faecal obstruction in malignant phaeochromocytoma

    International Nuclear Information System (INIS)

    Ratcliffe, J.F.

    1986-01-01

    Stercoral obstruction in a young woman with disseminated phaeochromocytoma was diagnosed and treated successfully using an enema of isosmolar iohexol (Omnipaque) and 1% polysorbate 80 (Tween 80) without complication. Surgical intervention was thus avoided. A low osmolality water-soluble contrast medium (iohexol 150 mg I/ml) with a wetting agent (1% Tween 80) was used because a barium suspension would have inspissated, exacerbating the constipation and a hyperosmolar contrast medium might have precipitated a hypertensive crisis and destablished her critical salt and water balance. (orig.)

  2. Lipase production by Penicillium restrictum using solid waste of industrial babassu oil production as substrate.

    Science.gov (United States)

    Palma, M B; Pinto, A L; Gombert, A K; Seitz, K H; Kivatinitz, S C; Castilho, L R; Freire, D M

    2000-01-01

    Lipase, protease, and amylase production by Penicillium restrictum in solid-state fermentation was investigated. The basal medium was an industrial waste of babassu oil (Orbignya oleifera) production. It was enriched with peptone, olive oil, and Tween-80. The supplementation positively influenced both enzyme production and fungal growth. Media enriched with Tween-80 provided the highest protease activity (8.6 U/g), whereas those enriched with peptone and olive oil led to the highest lipase (27.8 U/g) and amylase (31.8 U/g) activities, respectively.

  3. The influence of DNA repair inhibitors on the mutation rate

    International Nuclear Information System (INIS)

    Auzinger, Th.; Hruby, R.

    1980-12-01

    The simultaneous influence of gamma-radiation and DNA-repair inhibiting substances on the mutation frequency of mice was investigated in vivo with the micronucleus test. The detergens Tween 80, vitamin A, and the antiphlogisticum phenylbutazone were used as DNA-repair inhibiting substances. Using the same irradiation doses, a statistic significant increase of mutagenicity respectively micronucleus frequency was found in high concentrations of Tween 80 and in all used dosages of vitamin A, but not in phenylbutazone and in low concentrations of tween. (auth.)

  4. Influence on DNA repair inhibitors on dominant lethal factors after gamma irradiation

    International Nuclear Information System (INIS)

    Engl, D.

    1978-01-01

    Experiments were performed in order to test the hypothesis of a correlation between ionizing radiation and DNA repair inhibition under in vivo conditions. In a biometrically planned dominant lethal test on mice, the repair inhibition on the male gametes by butazolidine, TWEEN 80 and vitamin A was studied after gamma irradiation at 20 rad/10 min. No effect was observed in the case of butazolidine and TWEEN 80, whereas the influence of a high concentration of vitamin A (1 million IE/kg) was just at the statistical significancy threshold. (G.G.)

  5. Estudo das dispersões aquosas de nanotubos de carbono utilizando diferentes surfactantes Study of aqueous dispersions of carbon nanotubes using different surfactants

    Directory of Open Access Journals (Sweden)

    Isabella R. da Silva

    2013-01-01

    Full Text Available The dispersion of carbon nanotubes in water for their utilization in nanoscale devices is a challenging task. Comparative studies on interaction and dispersion of multi-wall carbon nanotubes (MWNT using two different surfactants (sodium dodecyl sulfate, SDS, and polyoxyethylenesorbitanmonooleate, Tween 80 are presented. The interaction between carbon nanotubes and surfactants was studied by tensiometry, conductivimetry, and fluorimetry. The dispersions of MWNT in surfactants were characterized using a UV-vis spectrophotometer. For effective dispersion, the minimum weight ratio of MWNT to surfactant was 1:41 and 1:3 for SDS and Tween 80, respectively.

  6. Estudo das dispersões aquosas de nanotubos de carbono utilizando diferentes surfactantes

    Directory of Open Access Journals (Sweden)

    Isabella R. da Silva

    2013-01-01

    Full Text Available The dispersion of carbon nanotubes in water for their utilization in nanoscale devices is a challenging task. Comparative studies on interaction and dispersion of multi-wall carbon nanotubes (MWNT using two different surfactants (sodium dodecyl sulfate, SDS, and polyoxyethylenesorbitanmonooleate, Tween 80 are presented. The interaction between carbon nanotubes and surfactants was studied by tensiometry, conductivimetry, and fluorimetry. The dispersions of MWNT in surfactants were characterized using a UV-vis spectrophotometer. For effective dispersion, the minimum weight ratio of MWNT to surfactant was 1:41 and 1:3 for SDS and Tween 80, respectively.

  7. Methane recovery from coal mine gas using hydrate formation in water-in-oil emulsions

    International Nuclear Information System (INIS)

    Zhong, Dong-Liang; Ding, Kun; Lu, Yi-Yu; Yan, Jin; Zhao, Wei-Long

    2016-01-01

    Highlights: • A water-in-oil emulsion was developed for CH_4 separation from coal mine methane gas. • Stable W/O emulsions were obtained with water cut in the range of (10–70%). • Gas hydrates nucleated faster with the reduction of water–oil volume ratio. • Gas uptake increased with the decrease of water–oil volume ratio. • CH_4 recovery was greatly enhanced by hydrate formation in W/O emulsions. - Abstract: In this work, a water-in-oil (W/O) emulsion was developed using liquid water, mineral oil, Sorbitan monooleate (Span 80), and cyclopentane. It was employed to enhance gas hydrate formation for CH_4 separation from a simulated coal mine methane (CMM) gas (30 mol% CH_4, 60 mol% N_2, and 10 mol% O_2). The stability test at atmospheric pressure and at a high pressure of 3.5 MPa showed that stable W/O emulsions were obtained when the water–oil volume ratio (WOR) was below 80%. The emulsified droplets size was measured with WOR ranging from 10% to 70%. Then kinetic experiments of CH_4 separation by hydrate formation in W/O emulsions were carried out at 273.6 K and (3.5–5.0) MPa in batch operation. The results indicated that water–oil volume ratio is a key factor that affects the kinetics of gas hydrate formation from the CMM gas mixture. Hydrate nucleation was observed to occur faster while WOR was decreased, and gas uptake increased significantly with the decrease of WOR. CH_4 concentration in the recovered gas mixture was increased to 52 mol% as compared to 30 mol% in the original gas mixture through one-stage hydrate formation in the W/O emulsions. It was found that the experimental conditions of 273.6 K, 3.5 MPa and WOR = 30% were favorable for CH_4 recovery from the CMM gas. The CH_4 recovery obtained under these conditions was 43%. It was higher than those obtained at WOR = 10% and 70%, and was greatly increased as compared with those obtained in the same reactor with the presence of TBAB (26%) and CP (33%).

  8. Emulsifier development for high-concentrated reverse emulsions

    Directory of Open Access Journals (Sweden)

    I.L. Kovalenko

    2016-05-01

    Full Text Available The reverse emulsions have found broad application in ore mining industry as matrixes of emulsion explosive substances and boring washing waters. The defining characteristic of reverse emulsions of industrial explosive substances is the high stability and immunity to crystallization. Aim: The aim of this work is to assess the mechanism of emulsifiers effect like SMO and some PIBSA-derivatives, that are most abundantly used in world practice, and also to develop an effective domestic emulsifier of reverse emulsions. Materials and methods: Using the semi-dynamic method with use of the reverse stalagmometer it was determined the decreasing in interfacial tension on “water / diesel fuel” border in the presence of 0.5 wt % sorbitan monooleate of various producers. Emulsions with use of the chosen emulsifiers using the dynamic mixer on the basis of monosolution of ammonium nitrate and diesel fuel have been produced. The emulsions have the following composition, wt %: ammonium nitrate – 76.8; water – 15.6; diesel fuel – 6.0; emulsifier – 1.6. Results: By the researches results of the interfacial tension “surfactant water / solution in diesel fuel”, the stability of emulsions using monosolution of ammonium nitrate and the IR spectrums of SMO of various producers it is established that presence in product of impurity of oleic acid, di- and trioleates leads to decreasing in interphase activity, increasing of emulsifier oil solubility and decreasing the resistance of emulsions to crystallization. On the basis of the spectral data analysis it is suggested about possibility of specific interaction on the mechanism of “spectral resonance” between emulsifiers of the PIBSA-MEA, LZX type and crystals nucleus of NH4NO3 ammonium nitrate in dispersed phase of emulsion. Amidation of vegetable oils by monoethanol amine is implemented at the reduced temperatures (90…100 °C. It was proved the availability mainly of fatty acids amides in product

  9. Piper betle LEAVES EXTRACT PATCH: EVALUATION OF ANTIBACTERIAL ACTIVITY, RELEASE PROFILE OF EUGENOL, AND LOCAL TOLERANCE

    Directory of Open Access Journals (Sweden)

    Mufrod Mufrod

    2016-08-01

    Full Text Available Piper betle leaf in extract form is more effective than crude drug. Eugenol is a component in the extract that has antibacterial activity but irritate. Patch of piper betle leaf extract was used on the mucosa to make oral cavity hygiene. Antibacterial activity was influenced by the release of eugenol from the patch. Release enhancer substances (RES such as glycerin, propylen glicol and tween 80 were added in patch formulation to increase the release of active substances. The aim of the research was to investigate the physicochemical properties, eugenol release profiles, and local tolerance test of the patch. Extract of piper betle leaf was made using infundation method. Patch was made according to the variation concentration of extract (1, 2 and 4% and RES (glycerine, propylen glycol and tween 80 using chitosan as vehicle. Patch produced solvent casting method. Patch obtained was tested for swelling index, folding endurance, surface pH, antibacterial activity, release of eugenol, and local tolerance. Data obtained were analyzed descriptively. The result showed that the addition of RES did not affect the surface pH but increase the water absorption with in inconsistent way except patch with tween 80. The flexibility (folding endurance value increased, and the highest amount of eugenol released was achieved by patch using propylen glicol. Patch with tween 80 and glycerin for all extract concentration and patch with 1% extract concentration using propylen glycol showed medium sensation (local tolerance, and patch with 2 and 4% extract using propylen glycol showed severe sensation.

  10. MIKROEMULSIFIKASI FRAKSI TIDAK TERSABUNKAN DISTILAT ASAM LEMAK MINYAK SAWIT [Microemulsification of Unsaponifiable Fractions of Palm Fatty Acid Distillate

    Directory of Open Access Journals (Sweden)

    Teti Estiasih

    2015-12-01

    Full Text Available Palm fatty acid distillate (PFAD is a by-product of palm oil refining that contains valuable bioactive compounds such as phytosterols, tocopherol, tocotrienols, and squalene which acummulates in unsaponifiable fraction (USF. In emulsion form, USF will be convenient and easy to use as food supplements or fortificants. Microemulsion is a type of emulsion that has stable droplet sizes of less than 10 m. Hence, the best emulsifier for USF microemulsion is important to be determined. The USF microemulsion was prepared by homogenizing the sample mixtures at 12.000 rpm for 20 min at USF concentration of 10% (w/v with lecithin and tween 80 as the emulsifiers at concentratiosn of 0.5, 1.0, and 1.5% (w/v. The microemulsions were analyzed for their viscosity, stability, and particle size distributions, as well as microstructures. The results showed that characteristics of microemulsion were affected by emulsifier types and concentrations. Tween 80 produced better microemulsion than lecithin as indicated by more stable emulsions, smaller droplet sizes, and narrower ranges of droplet size distributions. Increasing lectihin concentrations resulted in a narrower droplet size distribution but the average droplet size was not always smaller. Conversely, increasing tween 80 concentrations increased the average droplet sizes and ranges of particle size distributions. The most suitable emulsifier for USF microemulsion was tween 80 at concentration of 0.5%. This microemulsion contained bioactive compounds derived from USF, namely vitamin E (mainly tocotrienols, phytosterols, and squalene.

  11. Solubility of Meloxicam in Mixed Solvent Systems | Babu | Ethiopian ...

    African Journals Online (AJOL)

    The solubility of meloxicam is higher in phosphate buffer (pH 7.4) compared to water, probably due to ionization of the drug. The solubility of meloxicam is marginally enhanced in surfactant systems (Tween 80 and Brij 35) at concentrations higher than cmc, proving the micellar solubilization. Meloxicam solubility studies in ...

  12. Species identification and antifungal susceptibility pattern of ...

    African Journals Online (AJOL)

    Swabs were subjected to Gram-stain and culture on Sabouraud dextrose agar. ... (71.4%) and fifty-five (87.3%) Candida isolates were correctly speciated by Rice Tween-80 Agar and API 20C AUX, respectively, while fifty-seven isolates (90.5%) were correctly assigned into the 3 groups of yeasts identified by CAN2 agar.

  13. [Interference for Various Quench Agents of Chemical Disinfectants on Detection of Endotoxin Activities in Water].

    Science.gov (United States)

    Zhang, Can; Liu, Wen-jun; Shi, Yun; An, Dai-zhi; Bai, Miao; Xu, Wen

    2015-05-01

    The quenching agents such as histidine, glycine, ascorbic acid, Tween-80, sodium sulfite and sodium hyposulfite are commonly used for quenching the residual disinfectant in water. In this paper, in order to select the optimal type and concentration range of quenching agents prior to the Limulus assays, the interference effects of each quenching agent at different concentrations on endotoxin detection were investigated by the Limulus assays of kinetic-turbidity. Our results identified that, as for 0-1.0% concentration of histidine, ascorbic acid, Tween-80, sodium sulfite (pH unadjusted and pH neutral), interference on the Limulus assays was existed. Hence, these quenching agents could not be applied as neutralizers prior to Limulus assays. Although, there was no interference on endotoxin detection for the glycine, a yellow color, developed by the quenching products of glycine and glutaric dialdehyde, contributed to false positive results. Hence, glycine should not be used as quenching agents in Limulus assays for samples containing glutaric dialdehyde. Compared with other quenching agents as histidine, glycine, ascorbic acid, Tween-80, sodium sulfite, 0-1.0% concentration of sodium hyposulfite elicited no obvious interference, while 1.0%-5.0% concentration of sodium hyposulfite illustrated exhibition effect for endotoxin detection. All in all, compared with other quenching agents as histidine, glycine, ascorbic acid, Tween-80 and sodium sulfite, sodium hyposulfite is suitable for quenching chemicals prior to endotoxin detection and less than 0.5% of concentration is allowable.

  14. Effects of surfactants on the formation of gelatin nanofibres for controlled release of curcumin.

    Science.gov (United States)

    Deng, Lingli; Kang, Xuefan; Liu, Yuyu; Feng, Fengqin; Zhang, Hui

    2017-09-15

    This work studied the effects of non-ionic Tween 80, anionic sodium dodecyl sulfonate (SDS) and cationic cetyltrimethyl ammonium bromide (CTAB) surfactants on the morphology of electrospun gelatin nanofibres, and on the release behaviour, antioxidant activity and antimicrobial activity of encapsulated curcumin. Scanning electron micrographs showed that addition of SDS significantly increased the nanofibre diameter. Fourier transform infrared and differential scanning calorimetry analysis indicated that gelatin and SDS intimately interacted via electrostatic and hydrophobic interactions. However, these interactions inhibited the release of curcumin from the nanofibres with SDS, while CTAB and Tween 80 both facilitated the release. SDS and Tween 80 showed protective effects on curcumin from the attack of 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) radicals, and the increased release of curcumin from nanofibres with CTAB or Tween 80 resulted in a higher reducing power. The antimicrobial activity results suggested that the curcumin encapsulated gelatin nanofibres with CTAB exhibited effective inhibition against Staphylococcus aureus. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Extracellular proteolytic activity of Deinococcus geothermalis ...

    African Journals Online (AJOL)

    Nonionic detergents like Triton X-100 and Tween 80 did not affect catalytic properties. It suggested that the enzyme produced by D. geothermalis could be used as a component of detergents. Keywords: Deinococcus geothermalis, alkaline protease, detergents, thermostability. African Journal of Biotechnology Vol. 12(25) ...

  16. Enhanced sensitivity of Cypridina luciferin analog (CLA) chemiluminescence for the detection of O2- with non ionic detergents

    NARCIS (Netherlands)

    Osman, A.M.; Laane, C.; Hilhorst, R.

    2000-01-01

    Superoxide anion-triggered chemiluminescence of Cypridina luciferin analogue (CLA), 2-methyl-6-phenyl-3,7-dohydroimidazo[1,2-]pyrazin-3-one, is enhanced by non-ionic detergents such as Tween 20, Triton X-100 and Tween 80. At the concentration of 0.6øv/v) the largest increase (2.7-fold) of CLA light

  17. Download this PDF file

    African Journals Online (AJOL)

    Proff.Adewunmi

    Tween 80 was significantly higher (P<0.05) than those formulated in hydrophobic bases. Lippia oil ointment formulations showed greater antimicrobial activities than salicylic acid ointments. Two of the lippia oil ointment formulations bled when subjected to centrifugal force. Conclusion: Ointment formulations of lippia oil (10 ...

  18. Identification of the Allergenic Ingredients in Reduning Injection by Ultrafiltration and High-Performance Liquid Chromatography

    Directory of Open Access Journals (Sweden)

    Fang Wang

    2016-01-01

    Full Text Available Reduning injection is a traditional Chinese medicine injection which has multiple functions such as clearing heat, dispelling wind, and detoxification. Although Reduning injection was widely utilized, reports of its allergenicity emerged one after another. However, there is little research on its allergenic substances. The aim of this study is to evaluate the sensitization of Reduning injection and explore the underlying cause of the anaphylactic reaction. The main ingredients in Reduning injection were analyzed before and after ultrafiltration. Ultrafiltrate Reduning injection, unfiltered Reduning injection, egg albumin, Tween-80, and nine effective components in Reduning injection were utilized to sensitize guinea pigs. The serum 5-hydroxytryptamine level was used to assess the sensitization effect of Reduning injection. We found a significant decrease in Tween-80 content comparing to other components in the injection after ultrafiltration. Unfiltered Reduning injection, Tween-80, chlorogenic acid, and cryptochlorogenin acid caused remarkable anaphylactoid reaction on guinea pigs while ultrafiltration Reduning resulted in a significantly lower degree of sensitization. Our results suggest that ultrafiltration could significantly reduce the sensitization of Reduning injection, which is likely due to the decrease of Tween-80. We also conjectured that the form of chlorogenic acid and cryptochlorogenin acid within the complex solution mixture may also affect the sensitizing effect.

  19. anti-diarrhoeal and antispasmodic effects of leaf extract

    African Journals Online (AJOL)

    ... diphenoxylate hydrochloride (5 mg/kg). The extract also at 200 mg/kg dose level showed a significant inhibition (P<0.05) on gastrointestinal motility when compared with the vehicle (3 % Tween 80). The extract also exhibited a dose dependent inhibition on the contraction induced by acetylcholine and histamine on rabbit ...

  20. Mass Transfer from Entrapped DNAPL Sources Undergoing Remediation: Characterization Methods and Prediction Tools

    Science.gov (United States)

    2006-08-31

    volumetric depletion efficiency ( VDE ) considers how much DNAPL is depleted from the system , relative to the total volume of solution flushed through the...Gamma and x-ray attenuation systems ......................................................33 v 3.3 Experimental design and methods for investigation...Batch tests to determine partition coefficient of Tween 80 in a TCE DNAPL-water system

  1. Simple, Reliable, and Cost-Effective Yeast Identification Scheme for the Clinical Laboratory

    OpenAIRE

    Koehler, Ann P.; Chu, Kai-Cheong; Houang, Elizabeth T. S.; Cheng, Augustine F. B.

    1999-01-01

    The appearance of colonies on the chromogenic medium CHROMagar Candida combined with observation of morphology on corn meal–Tween 80 agar was used for the identification of 353 clinical yeast isolates. The results were compared with those obtained with API yeast identification kits. The accuracy of identification and the turnaround time were equivalent for each method, and our cultural method was less expensive.

  2. Alterations induced by x-rays and ultraviolet light on the synthesis and maintenance of macromolecular components within cells. Progress report, March 1, 1975--February 1, 1976

    International Nuclear Information System (INIS)

    Billen, D.

    1976-01-01

    Progress is reported on the following research projects: role of DNA polymerases and DNA ligase in repair synthesis in Escherichia coli and Bacillus subtilis following exposure to x radiation; effects of Tween-80 on permeability of hamster ovary cells to nucleotides; effects of uv radiation on DNA metabolism in B. subtilis; and studies on the nature of repair-deficient mutants of B. subtilis

  3. Evaluation of Antimicrobial Activity of the Essential Oil of Myrtus ...

    African Journals Online (AJOL)

    Since the plant is traditionally used in the treatment of gingivitis, the oil was formulated as gum paint using glycerol and blend of surfactants (Tween 80 and Span 80). In vitro efficacy test of the formulation showed a promising activity having a mean zone of inhibition of 38 mm against S. auresus and E.coli, 43 mm against S.

  4. Surface tension of compositions of polyhexametyleneguanidine hydrochloride - surfactants

    Directory of Open Access Journals (Sweden)

    S. Kumargaliyeva

    2012-12-01

    Full Text Available We made up songs bactericidal polyhexamethyleneguanidine hydrochloride (metacyde with the surface-active substances - anionic sodium dodecylsulfate, cationic cetylpyridinium bromide, and nonionic Tween-80 and measured the surface tension of water solutions. The study showed that the composition metacyde with surface-active agents have a greater surface activity than the individual components.

  5. Cationic solid-lipid nanoparticles can efficiently bind and transfect plasmid DNA

    NARCIS (Netherlands)

    Olbrich, C; Bakowsky, U; Muller, RH; Kneuer, C

    2001-01-01

    The suitability of cationically modified solid-lipid nanoparticles (SLN) as a novel transfection agent was investigated. SLN were produced by hot homogenisation using either Compritol ATO 888 or paraffin as matrix lipid, a mixture of Tween 80 and Span 85 as tenside and either EQ1

  6. Effect of nifedipine, imipramine and sertraline on the antidepressant ...

    African Journals Online (AJOL)

    The objective of the study was to determine the effect of nifedipine, imipramine and sertraline on the acute and long-term antidepressant-like responses of furosemide in the forced swim (FST) and tail suspension (TST) tests in mice. Groups of mice of six in each group were treated for 30 days with Tween 80, furosemide (10 ...

  7. Cytotoxicity of Gemcitabine-Loaded-Microemulsions in Breast and ...

    African Journals Online (AJOL)

    Purpose: To evaluate the antitumor activity of gemcitabine (GEM), incorporated in microemulsions with varying surfactant-to-oil (S/O) ratio, against MCF-7 breast cancer cells and HCT 116 colon cancer cells. Methods: The microemulsion formulations consisted of Tween 80, Span 20, isopropyl myristate (IPM) and aqueous ...

  8. Ofokansi, KC

    African Journals Online (AJOL)

    Ofokansi, KC. Vol 5, No 1 (2006) - Articles The use of liquid self-emulsifying drug delivery systems based on peanut oil/tween 80 in the delivery of griseofulvin. Abstract · Vol 8, No 1 (2010) - Articles A Novel Self-Nanoemulsifying Drug Delivery System Based on a Homolipid from Capra Hircus for the Delivery of Indomethacin

  9. Cultivation of Parasitic Leptospires: Effect of Pyruvate

    Science.gov (United States)

    Johnson, R. C.; Walby, J.; Henry, R. A.; Auran, N. E.

    1973-01-01

    Sodium pyruvate (100 μg/ml) is a useful addition to the Tween 80-albumin medium for the cultivation of parasitic serotypes. It is most effective in promoting growth from small inocula and growth of the nutritionally fastidious serotypes. Images PMID:4580191

  10. Evaluation of glycerol derivative as emulsifier for oil based drilling fluids; Avaliacao de derivados de glicerina como emulsificante para fluidos de perfuracao de base oleo

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Susan A. [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil). Escola de Quimica; Cavalcanti, Milena Y.; Rodrigues Junior, Jorge; Lachter, Elizabeth R.; Nascimento, Regina Sandra V. [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil). Inst. de Quimica

    2008-07-01

    In view of the growing search for new applications for the surplus glycerine of biodiesel production, the use of a glycerine derivative as emulsifier in oil based muds is proposed in this work. Glycerine monooleate was synthesized through esterification reaction, and characterized by NMR{sup 13}C. Its applicability as emulsifier was verified through electric stability tests performed on inverted phase drilling fluids. The obtained results were compared with two formulations containing different emulsifiers (sorbitol monooleate and trimethylolpropane monooleate). It was also evaluated the rheological properties of the formulated fluids through standard tests. It was verified that the fluid that contained the glycerine derivative showed considerably better electric stability results than the other systems. It also presented rheological properties similar to the ones shown by the system that contained the commercial emulsifier (sorbitol monooleate). Thus, it was found that glycerine monooleate is a potential substitute to the currently emulsifiers (author)

  11. Microbial inhibitory and radical scavenging activities of cold-pressed terpeneless Valencia orange (Citrus sinensis) oil in different dispersing agents.

    Science.gov (United States)

    Chalova, Vesela I; Crandall, Philip G; Ricke, Steven C

    2010-04-15

    Due to their low solubility in water, oil-based bioactive compounds require dispersion in a surface-active agent or appropriate solvents to ensure maximum contact with microorganisms. These combinations, however, may change their physical and/or chemical characteristics and consequently alter the desired functionality. The objective of this study was to determine the impact of selected dispersing agents, ethanol, dimethyl sulfoxide (DMSO), and Tween-80, on cold-pressed terpeneless (CPT) Valencia orange oil to function as a free radical scavenger and an antimicrobial food additive. When dissolved in ethanol or DMSO, the orange oil fraction had similar minimum inhibitory concentrations (MIC) for Listeria monocytogenes ATCC 19 115 (0.3% and 0.25% v/v respectively), which were significantly lower (P orange oil (up to 3%) in an aqueous solution of 0.1% Tween-80 yielded no inhibitory activities against any of the test bacteria. However, the 1% natural orange oil dispersed in Tween-80 exhibited 56.86% 2,2-diphenyl-1-picryl hydrazyl (DPPH) radical inhibition versus 18.37% and 16.60% when the same level of orange oil was dissolved in DMSO or ethanol, respectively. At the same orange oil concentration, the oil/Tween-80 suspension yielded 57.92% neutralization of hydroxyl radicals. This represents 71.37% of the mannitol antioxidant activity, which was used as a positive control. These findings suggest that Tween-80 is an appropriate dispersing agent only if the antioxidant functionality is desired. If both antimicrobial and antioxidant properties are needed, the CPT Valencia orange oil should be dispersed in either DMSO or ethanol. (c) 2010 Society of Chemical Industry.

  12. A plasmonic nanosensor for lipase activity based on enzyme-controlled gold nanoparticles growth in situ

    Science.gov (United States)

    Tang, Yan; Zhang, Wei; Liu, Jia; Zhang, Lei; Huang, Wei; Huo, Fengwei; Tian, Danbi

    2015-03-01

    A plasmonic nanosensor for lipase activity was developed based on one-pot nanoparticle growth. Tween 80 was selected not only as the substrate for lipase recognition but also as the reducing and stabilizing agent for the sensor fabrication. The different molecular groups in Tween 80 could have different roles in the fabrication procedure; the H2O2 produced by the autoxidation of the ethylene oxide subunits in Tween 80 could reduce the AuCl4- ions to Au atoms, meanwhile, the lipase could hydrolyze its carboxyl ester bond, which could, in turn, control the rate of nucleation of the gold nanoparticles (AuNPs) and tailor the localized surface plasmon resonance (LSPR) of the AuNP transducers. The color changes, which depend on the absence or presence of the lipase, could be used to sense the lipase activity. A linear response ranging from 0.025 to 4 mg mL-1 and a detection limit of the lipase as low as 3.47 μg mL-1 were achieved. This strategy circumvents the problems encountered by general enzyme assays that require sophisticated instruments and complicated assembling steps. The methodology can benefit the assays of heterogeneous-catalyzed enzymes.A plasmonic nanosensor for lipase activity was developed based on one-pot nanoparticle growth. Tween 80 was selected not only as the substrate for lipase recognition but also as the reducing and stabilizing agent for the sensor fabrication. The different molecular groups in Tween 80 could have different roles in the fabrication procedure; the H2O2 produced by the autoxidation of the ethylene oxide subunits in Tween 80 could reduce the AuCl4- ions to Au atoms, meanwhile, the lipase could hydrolyze its carboxyl ester bond, which could, in turn, control the rate of nucleation of the gold nanoparticles (AuNPs) and tailor the localized surface plasmon resonance (LSPR) of the AuNP transducers. The color changes, which depend on the absence or presence of the lipase, could be used to sense the lipase activity. A linear response

  13. The influence of bovine milk high or low in isoflavones on hepatic gene expression in mice

    DEFF Research Database (Denmark)

    Skaanild, Mette Tingleff; Nielsen, Tina Skau

    2012-01-01

    Isoflavones have generated much attention due to their potential positive effects in various diseases. Phytoestrogens especially equol can be found in bovine milk, as feed ration for dairy cows is comprised of plants containing phytoestrogens. The aim of this study was to analyze the changes...... in hepatic gene expression after dietary intake of milk high and low in isoflavones. In addition to pelleted feed female NMRI mice were offered water, water added either 17β-estradiol, equol, Tween 80, and milk high and low in isoflavone content for a week. Gene expression was analyzed using an array q......PCR kit. It was revealed that Tween 80 and 17β-estradiol upregulated both phase I and phase II genes to the same extent whereas equol alone, high and low isoflavone milk did not alter the expression of phase I genes but decreased the expression of phase II genes. This study shows that dietary isoflavones...

  14. A generally adoptable radiotracing method for tracking carbon nanotubes in animals

    Energy Technology Data Exchange (ETDEWEB)

    Deng Xiaoyong; Yang Shengtao; Nie Haiyu; Wang Haifang; Liu Yuanfang [Beijing National Laboratory for Molecular Sciences, Department of Chemical Biology, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871 (China)], E-mail: haifangw@pku.edu.cn

    2008-02-20

    Carbon nanotube (CNT) mediated drug delivery systems have currently aroused a great deal of interest. Such delivery systems for drugs, proteins and genes have been preliminarily studied using cellular and animal models. For the further study of the pharmacokinetics and related biological behaviours of CNTs in vivo, a fast and convenient tracing method is particularly demanded. In this paper, we developed a generally adoptable tracing method for the biodistribution study of functionalized CNTs in vivo. Taurine covalently functionalized multi-walled carbon nanotubes (tau-MWNTs) and Tween-80 wrapped MWNTs (Tween-MWNTs) were labelled with {sup 125}I, and then their distribution in mice was determined. It is interesting that Tween-80 can reduce the RES uptake of MWNTs remarkably. The resulting distribution of {sup 125}I-tau-MWNTs was very consistent with that using {sup 14}C-taurine-MWNTs as the CNTs tracer, which means the easy {sup 125}I labelling method is reliable and effective.

  15. Chlamydospore production and germ-tube formation by auxotrophs of Candida albicans.

    Science.gov (United States)

    Balish, E

    1973-04-01

    A prototrophic strain and 21 auxotrophic strains of Candida albicans were assessed for their capacity to produce chlamydospores and germ tubes. All of the mutants were able to produce germ-tubes in human serum but only two mutants produced them in defined medium with L-alpha-amino-n-butyric acid as the sole source of nitrogen. Most auxotrophs were not able to produce chlamydospores on corn meal agar with 1% Tween 80, but they could be induced to do so if the medium was supplemented with their growth requirement(s). Although L-cysteine was able to support the growth of two methionine mutants, it did not support chlamydospore formation when added to corn meal agar with 1% Tween 80. Mutants of C. albicans that do not form chlamydospores could be incorrectly identified in laboratories that rely on chlamydospore formation for identification.

  16. New milk medium for germ tube and chlamydoconidia production by Candida albicans.

    Science.gov (United States)

    Jitsurong, S; Kiamsiri, S; Pattararangrong, N

    1993-08-01

    A new medium consisting of UHT milk, tween 80 and agar is described for the development of both germ tube and chlamydoconidia by Candida albicans. In total 172 isolates from clinical specimens, including C. albicans (112), C. guilliermondii (4), C. krusei (3), C. parasilopsis (16). C. tropicalis (28), Torulopsis glabrata (6) and Trichosporon beigellii (3), were examined in this medium by using the standard method. A higher percentage (98.2%) of germ tube production by C. albicans was found in this medium than in undiluted serum (90.2%). In addition, only C. albicans was found to be able to produce a high percentage of chlamydoconidia (95.5%) after 48 hours' incubation. In comparison with the conventional medium, corn meal tween 80 agar (21.4%), this new medium gives a significantly higher percentage and abundance of chlamydoconidia production. Being simple, cheap and easy to prepare, the new milk medium is proposed as very practical in the clinical mycology laboratory.

  17. An investigation into the preservation of microbial cell banks for α-amylase production during 5 l fed-batch Bacillus licheniformis fermentations.

    Science.gov (United States)

    Hancocks, Nichola H; Thomas, Colin R; Stocks, Stuart M; Hewitt, Christopher J

    2010-10-01

    Fluorescent staining techniques were used for a systematic examination of methods used to cryopreserve microbial cell banks. The aim of cryopreservation here is to ensure subsequent reproducible fermentation performance rather than just post thaw viability. Bacillus licheniformis cell physiology post-thaw is dependent on the cryopreservant (either Tween 80, glycerol or dimethyl sulphoxide) and whilst this had a profound effect on the length of the lag phase, during subsequent 5 l fed-batch fermentations, it had little effect on maximum specific growth rate, final biomass concentration or α-amylase activity. Tween 80 not only protected the cells during freezing but also helped them recover post-thaw resulting in shorter process times.

  18. Immobilization of cellulase mixtures on magnetic particles for hydrolysis of lignocellulose and ease of recycling

    DEFF Research Database (Denmark)

    Alftrén, Johan; Hobley, Timothy John

    2014-01-01

    In the present study whole cellulase mixtures were covalently immobilized on non-porous magnetic particles to enable enzyme reuse. It was shown that CellicCTec2 immobilized on magnetic particles activated with cyanuric chloride gave the highest bead activity measured by mass of reducing sugar...... serum albumin (BSA)) on hydrolysis yield was studied for free and immobilized CellicCTec2. It was observed that for both free and immobilized CellicCTec2 the hydrolysis yield was increased when Tween 80, PEG 6000 or BSA was included. Interaction between magnetic particles (containing immobilized Cellic......CTec2) and lignin was examined and it was demonstrated that addition of BSA completely inhibited interaction while Tween 80 and PEG 6000 had no effect on decreasing magnetic particle-lignin interaction. Hydrolysis of pretreated wheat straw biomass was performed in two consecutive cycles using...

  19. Optimized formation of detergent micelles of beta-carotene and retinal production using recombinant human beta,beta-carotene 15,15'-monooxygenase.

    Science.gov (United States)

    Kim, Nam-Hee; Kim, Yeong-Su; Kim, Hye-Jung; Oh, Deok-Kun

    2008-01-01

    The formation of beta-carotene detergent micelles and their conversion into retinal by recombinant human beta,beta-carotene 15,15'-monooxygenase was optimized under aqueous conditions. Toluene was the most hydrophobic among the organic solvents tested; thus, it was used to dissolve beta-carotene, which is a hydrophobic compound. Tween 80 was selected as the detergent because it supported the highest level of retinal production among all of the detergents tested. The maximum production of retinal was achieved in detergent micelles containing 200 mg/L of beta-carotene and 2.4% (w/v) Tween 80. Under these conditions, the recombinant enzyme produced 97 mg/L of retinal after 16 h with a conversion yield of 48.5% (w/w). The amount of retinal produced, which is the highest ever reported, is a result of the ability of our system to dissolve large amounts of beta-carotene.

  20. Molecular Theory and Simulation of Water-Oil Contacts

    Science.gov (United States)

    Tan, Liang

    . Eventually the dispersant COREXIT 9500 was used predominantly in responding to this accident. The formulation of COREXIT dispersants is somewhat complicated and the various constituents (and their interactions) deserve exhaustive study. Here we focus on sorbitan monooleate (SPAN80), one important component of COREXIT 9500, and we investigate its behavior in oil-water-surfactant systems. Extensive all-atom molecular dynamics calculations on the water-squalane interface for nine different loadings with SPAN80, at T = 300K, are analyzed for the surface tension equation of state, desorption free energy profiles as they depend on loading, and to evaluate escape times for absorbed SPAN80 into the bulk phases. These results suggest that loading only weakly affects accommodation of a SPAN80 molecule by this squalane-water interface. Specifically, the surface tension equation of state is simple from conditions of low loading (high tension) to high loading (lower tension) studied, and the desorption free energy profiles are weakly dependent on loading here. The perpendicular motion of the centroid of the SPAN80 head-group ring is well-described by a diffusional model near the minimum of the desorption free energy profile. Lateral diffusional motion is weakly dependent on loading. Escape times evaluated on the basis of a diffusional model and the desorption free energies are 0.07 s (into the squalane) and 300 h (into the water). The latter value is consistent with irreversible absorption observed by related experimental work.

  1. Research Abstracts of 1980.

    Science.gov (United States)

    1980-12-01

    and EDTA were diluted in supplemented veal infusion broth. Serial dilutions of benzalkonium chloride , cetylpyridinum chloride , Tween 80, Tween 60...a prime virulence factor in dental caries initiation. Enzymatic hydrolysis of these water-insoluble glucans could result in the reduction or control...Increasing concentrations of T-10 prolonged the delay. When 1% T-10 was added to diet 2000, containing 56% sucrose, there was no significant reduction in

  2. Purification of 2-oxo acid dehydrogenase multienzyme complexes from ox heart by a new method.

    OpenAIRE

    Stanley, C J; Perham, R N

    1980-01-01

    A new method is described that allows the parallel purification of the pyruvate dehydrogenase and 2-oxoglutarate dehydrogenase multienzyme complexes from ox heart without the need for prior isolation of mitochondria. All the assayable activity of the 2-oxo acid dehydrogenase complexes in the disrupted tissue is made soluble by the inclusion of non-ionic detergents such as Triton X-100 or Tween-80 in the buffer used for the initial extraction of the enzyme complexes. The yields of the pyruvate...

  3. Near-Infrared Fluorescence Imaging Guided Therapy: Molecular Beacon-Based Photosensitizers Triggered by Breast Cancer-Specific mRNA

    Science.gov (United States)

    2007-05-01

    experiments was first dissolved in dimethylsulfoxide ( DMSO ) (no more than 0.5% of total volume) and then diluted with 0.1% Tween 80 in DNA-water, filtered...Abbreviations: BSA, bovine serum albumin; DCM, dichlo- romethane; DIPEA, diisopropylethylamine; DMSO , dimethylsulfoxide ; EDTA...example, the standard aqueous solution-based oligonucleotide conjugation protocol, even with the help of organic solvents (ACN), can not be used for

  4. Alkylresorcinols in rye (Secale cereale L. caryopses. III. Application of detergents for extraction of proteins and alkylresorcinols

    Directory of Open Access Journals (Sweden)

    W. Mejbaum-Katzenellenbogen

    2015-01-01

    Full Text Available In the work here described sodium dodecyl sulphate solutions (SDS, tween 80 and triton X 100 were used for isolation of proteins and 5-n-alkylresorcinols from ground rye grain. It was found that the above named detergents extract different protein and various amounts of alkylresorcin derivatives. The results indicate that 5-n-alkylresorcinols are localized in the membraneous structures of rye caryopses.

  5. Enhanced cellulase recovery without β-glucosidase supplementation for cellulosic ethanol production using an engineered strain and surfactant.

    Science.gov (United States)

    Huang, Renliang; Guo, Hong; Su, Rongxin; Qi, Wei; He, Zhimin

    2017-03-01

    Recycling cellulases by substrate adsorption is a promising strategy for reducing the enzyme cost of cellulosic ethanol production. However, β-glucosidase has no carbohydrate-binding module (CBM). Thus, additional enzymes are required in each cycle to achieve a high ethanol yield. In this study, we report a new method of recycling cellulases without β-glucosidase supplementation using lignocellulosic substrate, an engineered strain expressing β-glucosidase and Tween 80. The cellulases and Tween 80 were added to an aqueous suspension of diluted sulfuric acid/ammonia-treated corncobs in a simultaneous saccharification and fermentation (SSF) process for ethanol production. Subsequently, the addition of fresh pretreated corncobs to the fermentation liquor and remaining solid residue provided substrates with absorbed cellulases for the next SSF cycle. This method provided excellent ethanol production in three successive SSF cycles without requiring the addition of new cellulases. For a 10% (w/v) solid loading, a cellulase dosage of 30 filter paper units (FPU)/g cellulose, 0.5% Tween 80, and 2 g/L of the engineered strain, approximately 90% of the initial ethanol concentration from the first SSF process was obtained in the next two SSF processes, with a total ethanol production of 306.27 g/kg corncobs and an enzyme productivity of 0.044 g/FPU. Tween 80 played an important role in enhancing cellulase recovery. This new enzyme recycling method is more efficient and practical than other reported methods. Biotechnol. Bioeng. 2017;114: 543-551. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  6. Influence of polysorbate 80 and cyclopropane fatty acid synthase activity on lactic acid production by Lactobacillus casei ATCC 334 at low pH.

    Science.gov (United States)

    Broadbent, J R; Oberg, T S; Hughes, J E; Ward, R E; Brighton, C; Welker, D L; Steele, J L

    2014-03-01

    Lactic acid is an important industrial chemical commonly produced through microbial fermentation. The efficiency of acid extraction is increased at or below the acid's pKa (pH 3.86), so there is interest in factors that allow for a reduced fermentation pH. We explored the role of cyclopropane synthase (Cfa) and polysorbate (Tween) 80 on acid production and membrane lipid composition in Lactobacillus casei ATCC 334 at low pH. Cells from wild-type and an ATCC 334 cfa knockout mutant were incubated in APT broth medium containing 3 % glucose plus 0.02 or 0.2 % Tween 80. The cultures were allowed to acidify the medium until it reached a target pH (4.5, 4.0, or 3.8), and then the pH was maintained by automatic addition of NH₄OH. Cells were collected at the midpoint of the fermentation for membrane lipid analysis, and media samples were analyzed for lactic and acetic acids when acid production had ceased. There were no significant differences in the quantity of lactic acid produced at different pH values by wild-type or mutant cells grown in APT, but the rate of acid production was reduced as pH declined. APT supplementation with 0.2 % Tween 80 significantly increased the amount of lactic acid produced by wild-type cells at pH 3.8, and the rate of acid production was modestly improved. This effect was not observed with the cfa mutant, which indicated Cfa activity and Tween 80 supplementation were each involved in the significant increase in lactic acid yield observed with wild-type L. casei at pH 3.8.

  7. Effects of Two Surfactants and Beta-Cyclodextrin on Beta-Cypermethrin Degradation by Bacillus licheniformis B-1.

    Science.gov (United States)

    Zhao, Jiayuan; Chi, Yuanlong; Liu, Fangfang; Jia, Dongying; Yao, Kai

    2015-12-23

    The biodegradation efficiency of beta-cypermethrin (β-CY) is low especially at high concentrations mainly due to poor contact between this hydrophobic pesticide and microbial cells. In this study, the effects of two biodegradable surfactants (Tween-80 and Brij-35) and β-cyclodextrin (β-CD) on the growth and cell surface hydrophobicity (CSH) of Bacillus licheniformis B-1 were studied. Furthermore, their effects on the solubility, biosorption, and degradation of β-CY were investigated. The results showed that Tween-80 could slightly promote the growth of the strain while Brij-35 and β-CD exhibited little effect on its growth. The CSH of strain B-1 and the solubility of β-CY were obviously changed by using Tween-80 and Brij-35. The surfactants and β-CD could enhance β-CY biosorption and degradation by the strain, and the highest degradation was obtained in the presence of Brij-35. When the surfactant or β-CD concentration was 2.4 g/L, the degradation rate of β-CY in Brij-35, Tween-80, and β-CD treatments was 89.4%, 50.5%, and 48.1%, respectively. The half-life of β-CY by using Brij-35 was shortened by 69.1 h. Beta-CY content in the soil with both strain B-1 and Brij-35 decreased from 22.29 mg/kg to 4.41 mg/kg after incubation for 22 d. This work can provide a promising approach for the efficient degradation of pyrethroid pesticides by microorganisms.

  8. Behavior of isolated nuclei and chromosomes of Rhynchosciara in vitro

    International Nuclear Information System (INIS)

    Cestari, A.N.; Simoes, L.C.G.

    1980-01-01

    Nuclei and chromosomes were isolated from salivary glands of Rhynchosciara by a method involving micropipette manipulation, after diluting the intercellular cement with a mixture of citric acid, tween 80 and sucrose. Culture media supplemented and not supplemented with different concentrations of lobster hemolymph or calf serum, were compared. In the best medium, isolated nuclei and chromosomes treated with tritiated precursors showed nucleic acid and protein synthesis. (Author) [pt

  9. Behavior of isolated nuclei and chromosomes of Rhynchosciara in vitro

    Energy Technology Data Exchange (ETDEWEB)

    Cestari, A N; Simoes, L C.G. [Sao Paulo Univ. (Brazil). Inst. de Biociencias

    1980-09-01

    Nuclei and chromosomes were isolated from salivary glands of Rhynchosciara by a method involving micropipette manipulation, after diluting the intercellular cement with a mixture of citric acid, tween 80 and sucrose. Culture media supplemented and not supplemented with different concentrations of lobster hemolymph or calf serum, were compared. In the best medium, isolated nuclei and chromosomes treated with tritiated precursors showed nucleic acid and protein synthesis.

  10. Design of cationic nanostructured heterolipid matrices for ocular delivery of methazolamide

    Directory of Open Access Journals (Sweden)

    Youshia J

    2012-05-01

    Full Text Available John Youshia, Amany O Kamel, Abdelhameed El Shamy, Samar MansourPharmaceutics and Industrial Pharmacy Department, Faculty of Pharmacy, Ain Shams University, Cairo, EgyptAbstract: Solid lipid nanoparticles (SLNs formulated from one type of lipid (homolipid suffer from low drug encapsulation and drug bursting due to crystallization of the lipid into the more ordered β modification, which leads to decreased drug entrapment and faster drug release. This study assessed the feasibility of using nanostructured lipid matrices (NLMs for ocular delivery of methazolamide-(MZA adopting heterolipids composed of novel mixtures of Compritol® and cetostearyl alcohol (CSA, and stabilized by Tween 80®. The systems were prepared using the modified high shear homogenization followed by ultrasonication method, which avoids the use of organic solvents. A 32 full factorial design was constructed to study the influence of two independent variables, namely the ratio of CSA:Compritol and the concentration of Tween 80, each in three levels. The dependent variables were the entrapment efficiency percentages (EE%, mean particle size (PS, polydispersity index (PDI, and zeta potential (ZP. In vivo intraocular pressure (IOP lowering activity for the selected formulae was compared to that of MZA solution. The results showed that increasing the ratio of CSA to Compritol increased the EE% and PS, while increasing the concentration of Tween 80, decreased PS with no significant effect on EE%. The ZP values of all formulae were positive, and greater than 30 mV. The best formula, composed of 4% CSA, 2% Compritol, 0.15% stearylamine, and 2% Tween 80, with EE% of 25.62%, PS of 207.1 nm, PDI of 0.243, and ZP of 41.50 mV, showed in vitro sustained release properties for 8 hours and lowered the intraocular pressure by 8.3 mmHg within 3 hours, with this drop in pressure lasting for 12 hours.Keywords: nanostructured lipid matrices, heterolipids, factorial design, cetostearyl alcohol

  11. The DTIC Review: Volume 2, Number 4, Surviving Chemical and Biological Warfare

    Science.gov (United States)

    1996-12-01

    formulated with PA strategic defeat. plus Monophosphoryl Lipid A (MPL) in a Squalenel Lecithin / Tween 80 emulsion (SLT) and PA plus the saponin QS-21...PIGS, LYOPHILIZATION, IMMUNOGENS, LECITHIN . IDENTIFIERS: (U) MPL (MONOPHOSPHORYL LIPID A), SLT(SQUELENEL LECITHIN /TWEEN) + Included in The DTIC Review...mass spectrometric methods have and expressed in E. coli, and has been shown to hydrolyze the been developed as independent highly sensitive techniques

  12. PENGGUNAAN EKSTRAK BIOTA LAUTAGLAOPHENIA SP. UNTUK MENGENDALIKANFUSARIUM OXYSPORUM F.SP.VANILLAE PENYEBAB BUSUK BATANG VANILI

    Directory of Open Access Journals (Sweden)

    I KETUT SUADA

    2012-11-01

    Full Text Available The Use of Aglaophenia sp. Marine Biota Extract to Control Fusarium oxysporum f. sp. vanillae, a Pathogen of Vanilla Stem Rot The use of marine biota for organic fungicide material has enormous potential to be developed. The organic fungicide was directed to substitute synthetic fungicide for vanilla cultivation. Application of synthetic fungicide degraded environmental quality, therefore its applications does not support sustainable agriculture. The objective of this research was to know the potence of Aglaopheniain suppressing the growth of F. oxysporum f. sp.vanillae, the pathogen of vanilla stem rot. The research was done in green house in order to find the best substance for formulation of the extract. The substances screened were water, tween-80, and detergents with two different concentrations. Subsequently, two best formulas were chosen to apply in endemic area in Tabanan. The green house and field trial research used Randomized Completely Design with three and five replications respectively. Results showed that tween was the best substance used for formulation and concentration of 0.2% was better than other concentrations. The extract diluted in tween-80 on the concentration of 0.2% showed the lowest rot on stem, longest shoot, and the most leaves on vanilla shoot. Because of its significant performance, the 0.1% extract ofAglaopheniain 0.1% tween-80 was proposed to be the best formula to suppress the vanilla stem rot disease.

  13. Synthesis and functionalization of NaGdF4:Yb,Er@NaGdF4 core–shell nanoparticles for possible application as multimodal contrast agents

    Directory of Open Access Journals (Sweden)

    Dovile Baziulyte-Paulaviciene

    2017-09-01

    Full Text Available Upconverting nanoparticles (UCNPs are promising, new imaging probes capable of serving as multimodal contrast agents. In this study, monodisperse and ultrasmall core and core–shell UCNPs were synthesized via a thermal decomposition method. Furthermore, it was shown that the epitaxial growth of a NaGdF4 optical inert layer covering the NaGdF4:Yb,Er core effectively minimizes surface quenching due to the spatial isolation of the core from the surroundings. The mean diameter of the synthesized core and core–shell nanoparticles was ≈8 and ≈16 nm, respectively. Hydrophobic UCNPs were converted into hydrophilic ones using a nonionic surfactant Tween 80. The successful coating of the UCNPs by Tween 80 has been confirmed by Fourier transform infrared (FTIR spectroscopy. Scanning electron microscopy (SEM, powder X-ray diffraction (XRD, photoluminescence (PL spectra and magnetic resonance (MR T1 relaxation measurements were used to characterize the size, crystal structure, optical and magnetic properties of the core and core–shell nanoparticles. Moreover, Tween 80-coated core–shell nanoparticles presented enhanced optical and MR signal intensity, good colloidal stability, low cytotoxicity and nonspecific internalization into two different breast cancer cell lines, which indicates that these nanoparticles could be applied as an efficient, dual-modal contrast probe for in vivo bioimaging.

  14. Solid Lipid Nanoparticle Formulations of Docetaxel Prepared with High Melting Point Triglycerides: In Vitro and in Vivo Evaluation

    Science.gov (United States)

    2015-01-01

    Docetaxel (DCX) is a second generation taxane. It is approved by the U.S. Food and Drug Administration for the treatment of various types of cancer, including breast, non-small cell lung, and head and neck cancers. However, side effects, including those related to Tween 80, an excipient in current DCX formulations, can be severe. In the present study, we developed a novel solid lipid nanoparticle (SLN) composition of DCX. Trimyristin was selected from a list of high melting point triglycerides as the core lipid component of the SLNs, based on the rate at which the DCX was released from the SLNs and the stability of the SLNs. The trimyristin-based, PEGylated DCX-incorporated SLNs (DCX-SLNs) showed significantly higher cytotoxicity against various human and murine cancer cells in culture, as compared to DCX solubilized in a Tween 80/ethanol solution. Moreover, in a mouse model with pre-established tumors, the new DCX-SLNs were significantly more effective than DCX solubilized in a Tween 80/ethanol solution in inhibiting tumor growth without toxicity, likely because the DCX-SLNs increased the concentration of DCX in tumor tissues, but decreased the levels of DCX in major organs such as liver, spleen, heart, lung, and kidney. DCX-incorporated SLNs prepared with one or more high-melting point triglycerides may represent an improved DCX formulation. PMID:24621456

  15. Combined high-power ultrasound and high-pressure homogenization nanoemulsification: The effect of energy density, oil content and emulsifier type and content.

    Science.gov (United States)

    Calligaris, Sonia; Plazzotta, Stella; Valoppi, Fabio; Anese, Monica

    2018-05-01

    Combinations of ultrasound (US) and high-pressure homogenization (HPH) at low-medium energy densities were studied as alternative processes to individual US and HPH to produce Tween 80 and whey protein stabilized nanoemulsions, while reducing the energy input. To this aim, preliminary trials were performed to compare emulsification efficacy of single and combined HPH and US treatments delivering low-medium energy densities. Results highlighted the efficacy of US-HPH combined process in reducing the energy required to produce nanoemulsions stabilized with both Tween 80 and whey protein isolate. Subsequently, the effect of emulsifier content (1-3% w/w), oil amount (10-20% w/w) and energy density (47-175 MJ/m 3 ) on emulsion mean particle diameter was evaluated by means of a central composite design. Particles of 140-190 nm were obtained by delivering 175 MJ/m 3 energy density at emulsions containing 3% (w/w) Tween 80 and 10% (w/w) oil. In the case of whey protein isolate stabilized emulsions, a reduced emulsifier amount (1% w/w) and intermediate energy density (120 MJ/m 3 ) allowed a minimum droplet size around 220-250 nm to be achieved. Results showed that, in both cases, at least 50% of the energy density should be delivered by HPH to obtain the minimum particle diameter. Copyright © 2018 Elsevier Ltd. All rights reserved.

  16. Rapid production of Candida albicans chlamydospores in liquid media under various incubation conditions.

    Science.gov (United States)

    Alicia, Zavalza-Stiker; Blanca, Ortiz-Saldivar; Mariana, García-Hernández; Magdalena, Castillo-Casanova; Alexandro, Bonifaz

    2006-01-01

    The production of chlamydospores is a diagnostic tool used to identify Candida albicans; these structures also represent a model for morphogenetic research. The time required to produce them with standard methods is 48-72 hours in rice meal agar and tensoactive agents. This time can be shorted using liquid media such as cornmeal broth (CMB) and dairy supplements. Five media were tested: CMB plus 1% Tween-80, CMB plus 5% milk, CMB plus 5% milk serum, milk serum, and milk serum plus 1% Tween-80, under different incubation conditions: at 28 degrees C and 37 degrees C in a metabolic bath stirring at 150 rpm, and at 28 degrees C in a culture stove. The reading time points were established at 8 and 16 hours. The best results were obtained at 16 hours with CMB plus 5% milk under incubation at 28 degrees C and stirring at 150 rpm. The next most efficient methods were CMB plus 5% milk serum and CMB plus 1% Tween-80, under the same incubation conditions. The other media were ineffective in producing chlamydospores. The absence of stirring at 28 degrees C prevented the formation of chlamydospores within the set time points, and incubation at 37 degrees C decreased their production. This paper reports that the time to form C. albicans chlamydospores can be reduced.

  17. ISOLATION AND IDENTIFICATION OF LIPASE-PRODUCING FUNGI FROM LOCAL OLIVE OIL MANUFACTURE IN EAST OF ALGERIA

    Directory of Open Access Journals (Sweden)

    ALIMA RIHANI

    2018-03-01

    Full Text Available The main objective of this work was primary screening and isolation of lipase-producing microorganisms from oil-mill waste. For the screening of fungal strains with lipolytic activity, we employed a sensitive agar plate method, using a medium supplemented with CaCl2 and Tween 80. Another Tributyrin lipase activity was detected from clearing zones due to the hydrolysis of the triacylglycerols. The evolution of biomass and enzyme production has been assayed. A quantitative analysis of lipase activity was performed by the titration method using olive oil as a substrate supplemented with glucose or Tween 80. We have isolated some lipolytic strains from oil-mill effluent. Three of them were found to be excellent lipase producers that were identified as Penicillium sp, Aspergillus fumigatus and Aspergillus terreus. Lipolytic activity and biomass were enhanced in the medium supplemented by glucose. Tween 80 is also considered as a best inducer at the concentration of 1 %. In this condition, these isolates showed maximum lipase production within 24 h; achieved (3.91 IU‧mL-1 ± 0.12 for Penicillium sp.

  18. Preparation and characterization of ketoprofen-loaded solid lipid nanoparticles made from beeswax and carnauba wax.

    Science.gov (United States)

    Kheradmandnia, Soheila; Vasheghani-Farahani, Ebrahim; Nosrati, Mohsen; Atyabi, Fatemeh

    2010-12-01

    Solid lipid nanoparticles (SLNs) have been proposed as suitable colloidal carriers for delivery of drugs with limited solubility. Ketoprofen as a model drug was incorporated into SLNs prepared from a mixture of beeswax and carnauba wax using Tween 80 and egg lecithin as emulsifiers. The characteristics of the SLNs with various lipid and surfactant composition were investigated. The mean particle size of drug-loaded SLNs decreased upon mixing with Tween 80 and egg lecithin as well as upon increasing total surfactant concentration. SLNs of 75 ± 4 nm with a polydispersity index of 0.2 ± 0.02 were obtained using 1% (vol/vol) mixed surfactant at a ratio of 60:40 Tween 80 to egg lecithin. The zeta potential of these SLNs varied in the range of -15 to -17 (mV), suggesting the presence of similar interface properties. High drug entrapment efficiency of 97% revealed the ability of SLNs to incorporate a poorly water-soluble drug such as ketoprofen. Differential scanning calorimetry thermograms and high-performance liquid chromatographic analysis indicated the stability of nanoparticles with negligible drug leakage after 45 days of storage. It was also found that nanoparticles with more beeswax content in their core exhibited faster drug release as compared with those containing more carnauba wax in their structure. Copyright © 2010 Elsevier Inc. All rights reserved.

  19. Understanding the distribution of natural wax in starch-wax films using synchrotron-based FTIR (S-FTIR).

    Science.gov (United States)

    Muscat, Delina; Tobin, Mark J; Guo, Qipeng; Adhikari, Benu

    2014-02-15

    High amylose starch-glycerol (HAG) films were produced incorporating beeswax, candelilla wax and carnauba wax in the presence and absence of Tween-80 in order to determine the distribution of wax in the films during the film formation process. The distribution of these waxes within the film was studied using Synchrotron based Fourier Transform Infrared Spectroscopy (S-FTIR) which provided 2D mapping along the thickness of the film. The incorporation of 5% and 10% wax in HAG films produced randomly distributed wax or wax-rich domains, respectively, within these films. Consequently, the addition of these waxes to HAG increased the surface roughness and hydrophobicity of these films. The addition of Tween-80 caused variations in wax-rich bands within the films. The HAG+carnauba wax+Tween-80 films exhibited domed wax-rich domains displayed with high integrated CH2 absorption value at the interior of the films, rougher surface and higher contact angle values than the other films. The S-FTIR 2D images indicated that the distribution of wax in starch-wax films correlated with the roughness and hydrophobicity of the starch-wax films. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. Effect of chemicals on production, composition and antioxidant activity of polysaccharides of Inonotus obliquus.

    Science.gov (United States)

    Xu, Xiangqun; Quan, Lili; Shen, Mengwei

    2015-01-01

    Polysaccharides are important secondary metabolites from the medicinal mushroom Inonotus obliquus. Various fatty acids, surfactants and organic solvents as cell membrane-reorganizing chemicals were investigated for their stimulatory effects on the growth of fungal mycelium and production of exopolysaccharides (EPS) and endopolysaccharides (IPS) by submerged fermentation of I. obliquus. After evaluation of 14 chemicals, oleic acid, Tween 80, and TritonX-100 were chosen for optimization of addition concentration and addition time. Among the three chemicals, 0.1% (v/v) Tween 80 gave maximum production of mycelial biomass, EPS, IPS1, and IPS2 with a increase of 16.6, 81.6, 37.7 and 18.1%, respectively, when supplemented at the early growth phase (24h after inoculation). These EPS, IPS1, and IPS2 had significantly (pmonosaccharide compositions than those from the control. The simultaneously enhanced accumulation of bioactive EPS and IPS of cultured I. obliquus supplemented with Tween 80 was evident. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Preparation and Characterization of Naringenin-Loaded Elastic Liposomes for Topical Application.

    Directory of Open Access Journals (Sweden)

    Ming-Jun Tsai

    Full Text Available Excessive production of radical oxygen species in skin is a contributor to a variety of skin pathologies. Naringenin is a potent antioxidant. The purpose of the present study was to develop elastic liposomes for naringenin topical application. Naringenin-loaded elastic liposomes containing different amounts of Tween 80 and cholesterol were prepared. The physicochemical properties including vesicle size, surface charge, encapsulation efficiency, and permeability capacity were determined to evaluate the effect of components. The stability of formulation and skin irritation caused by drug-loaded elastic liposomes were also evaluated for assessment of the clinical utility of elastic liposomes. Saturated aqueous solution of naringenin and naringenin dissolved in 10% Tween 80 solution (5 mg/mL were used as the control group. The result showed that in using elastic liposomes as carrier, the deposition amounts in the skin of naringenin were significantly increased about 7.3~11.8-fold and 1.2~1.9-fold respectively, when compared with the saturated aqueous solution and Tween 80 solution-treated groups. The level of drug was more than 98.89±3.90% after 3 months of storage at 4℃. In a skin irritation test, the result showed experimental formulation exhibit considerably less irritating than the positive control (paraformaldehyde-treated group, suggesting its potential therapeutic application.

  2. Poly-3-hydroxybutyrate (PHB) production from alkylphenols, mono and poly-aromatic hydrocarbons using Bacillus sp. CYR1: A new strategy for wealth from waste.

    Science.gov (United States)

    Venkateswar Reddy, M; Mawatari, Yasuteru; Yajima, Yuka; Seki, Chigusa; Hoshino, Tamotsu; Chang, Young-Cheol

    2015-09-01

    In the present study five different types of alkylphenols, each of the two different types of mono and poly-aromatic hydrocarbons were selected for degradation, and conversion into poly-3-hydroxybutyrate (PHB) using the Bacillus sp. CYR1. Strain CYR1 showed growth with various toxic organic compounds. Degradation pattern of all the organic compounds at 100 mg/l concentration with or without addition of tween-80 were analyzed using high pressure liquid chromatography (HPLC). Strain CYR1 showed good removal of compounds in the presence of tween-80 within 3 days, but it took 6 days without addition of tween-80. Strain CYR1 showed highest PHB production with phenol (51 ± 5%), naphthalene (42 ± 4%), 4-chlorophenol (32 ± 3%) and 4-nonylphenol (29 ± 3%). The functional groups, structure, and thermal properties of the produced PHB were analyzed. These results denoted that the strain Bacillus sp. CYR1 can be used for conversion of different toxic compounds persistent in wastewaters into useable biological polyesters. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Modified chemically defined medium for enhanced respiratory growth of Lactobacillus casei and Lactobacillus plantarum groups.

    Science.gov (United States)

    Ricciardi, A; Ianniello, R G; Parente, E; Zotta, T

    2015-09-01

    Members of the Lactobacillus casei and Lactobacillus plantarum groups are capable of aerobic and respiratory growth. However, they grow poorly in aerobiosis in the currently available chemically defined media, suggesting that aerobic and respiratory growth require further supplementation. The effect of Tween 80, L-alanine, L-asparagine, L-aspartate, L-proline and L-serine on anaerobic and respiratory growth of Lact. casei N87 was investigated using a 2(5) factorial design. The effectiveness of modified CDM (mCDM) was validated on 21 strains of Lact. casei and Lact. plantarum groups. Tween 80 supplementation did not affect anaerobic growth, but improved respiratory growth. L-asparagine, L-proline and L-serine were stimulatory for respiring cells, while the presence of L-aspartate, generally, impaired biomass production. mCDM promoted the growth of Lact. casei and Lact. plantarum, with best results for strains showing a respiratory phenotype. The nutritional requirements of anaerobic and respiratory cultures of members of the Lact. casei and Lact. plantarum groups differ. Tween 80 and selected amino acids derived from pathways related to TCA cycle, pyruvate conversion and NADH recycling are required for respiration. The availability of mCDM will facilitate the study of aerobic metabolism of lactobacilli under controlled conditions. © 2015 The Society for Applied Microbiology.

  4. Development and evaluation of nitrendipine nanoemulsion for intranasal delivery.

    Science.gov (United States)

    Jain, Ratnesh; Patravale, Vandana B

    2009-02-01

    The clinical efficacy of Nitrendipine (NDP), a potent antihypertensive molecule, is limited due to its low oral bioavailability (10% to 20%) resulting from its extensive first-pass metabolism. The purpose of the present investigation was to enhance the bioavailability of NDP through formulating a nanoemulsion for its intranasal delivery. A Caproyl 90 based nanoemulsion sytem with Tween 80 as the surfactant, Transcutol P and Solutol HS-15 as solubiliser and cosurfactant respectively, was developed. A single isotropic region, which is considered as a bicontinuous nanoemulsion, was identified in the pseudo-ternary phase diagrams developed at various Tween 80: Transcutol P: Solutol HS-15 ratios. NDP was solubilized in a system consisting of Tween 80: Transcutol P: Solutol HS-15 at 1:2:1 weight ratio. The developed nanoemulsion was safe for nasal administration as confirmed by nasal histopathlogy studies with the mean globule size of 98.50 nm. The drug content per actuation was found to be 99.58 +/- 0.05%, with no significant changes over a period of one month. In vivo absorption studies revealed that NDP absorption from the nanoemulsion had a rapid onset of action and a relative bioavailability of 60.44%, significantly greater than the marketed oral tablets.

  5. Fabrication of large size alginate beads for three-dimensional cell-cluster culture

    Science.gov (United States)

    Zhang, Zhengtao; Ruan, Meilin; Liu, Hongni; Cao, Yiping; He, Rongxiang

    2017-08-01

    We fabricated large size alginate beads using a simple microfluidic device under a co-axial injection regime. This device was made by PDMS casting with a mold formed by small diameter metal and polytetrafluorothylene tubes. Droplets of 2% sodium alginate were generated in soybean oil through the device and then cross-linked in a 2% CaCl2 solution, which was mixed tween80 with at a concentration of 0.4 to 40% (w/v). Our results showed that the morphology of the produced alginate beads strongly depends on the tween80 concentration. With the increase of concentration of tween80, the shape of the alginate beads varied from semi-spherical to tailed-spherical, due to the decrease of interface tension between oil and cross-link solution. To access the biocompatibility of the approach, MCF-7 cells were cultured with the alginate beads, showing the formation of cancer cells clusters which might be useful for future studies.

  6. Development, optimization and evaluation of surfactant-based pulmonary nanolipid carrier system of paclitaxel for the management of drug resistance lung cancer using Box-Behnken design.

    Science.gov (United States)

    Kaur, Prabhjot; Garg, Tarun; Rath, Goutam; Murthy, R S Rayasa; Goyal, Amit K

    2016-07-01

    In the present study, nanostructured lipid carriers (NLCs) along with various surfactants loaded with paclitaxel (PTX) were prepared by an emulsification technique using a Box-Behnken design. The Box-Behnken design indicated that the most effective factors on the size and PDI were at high surfactant concentration (1.5%), low lipids ratio (6:4) and medium homogenization speed (6000 rpm). Among all the formulations, Tween 20-loaded NLCs show least particle size compared to Tween 80 and Tween 60. Entrapment efficiency of Tween 20, Tween 80 and Tween 60-loaded formulations were 82.40, 85.60 and 79.78%, respectively. Drug release of Tween 80, Tween 20 and Tween 60-loaded NLCs is 64.9, 62.3 and 59.7%, respectively (within 72 h). Maximum cellular uptake was observed with Tween 20 formulation on Caco-2 cell lines. Furthermore, spray drying of resultant NLCs was showed good flow properties and was selected for drug delivery to deeper airways. In-vivo studies demonstrated the better localization of drug within the lungs using different surfactant-based pulmonary delivery systems. From this study, we have concluded that delivering drugs through pulmonary route is advantageous for local action in lungs as maximum amount of drug concentration was observed in lungs. The surfactants could prove to be beneficial in treating drug resistance lung cancer by inhibiting P-gp efflux in the form of nano lipidic carriers.

  7. Dispersant affects the cellular influences of single-wall carbon nanotube: the role of CNT as carrier of dispersants.

    Science.gov (United States)

    Horie, Masanori; Stowe, Mayumi; Tabei, Miki; Kato, Haruhisa; Nakamura, Ayako; Endoh, Shigehisa; Morimoto, Yasuo; Fujita, Katsuhide

    2013-06-01

    The application of carbon nanotube (CNT) as a functional material to engineering and life sciences is advanced. In order to evaluate the cytotoxicity of CNT in vitro, some chemical and biological reagents are used for dispersants. In the present study, the cellular influences of six kinds of chemical or biological reagents used as dispersants were examined. Pluronic F-127, Pluronic F-68, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), pulmonary surfactant preparation Surfacten®, bovine serum albumin (BSA) and Tween 80 were used in the preparation of CNT-medium dispersants. The influences of each reagent on cell viability in human lung carcinoma A549 cells were small. However, Pluronic F-127, DPPC, Surfacten® and Tween 80 induced an increase of intracellular reactive oxygen species (ROS) level. Next, CNT-medium dispersions were prepared, using each reagent as a dispersant and applied to A549 cells. The cellular influences depended on the kind of dispersant. Cells exposed to CNT dispersion including Pluronic® F-127, Surfacten®, DPPC and Tween 80 showed LDH release to the culture supernatant. Induction of intracellular ROS level was observed in cells exposed to CNT dispersion including each reagent except BSA. These results suggest that the adsorbed dispersant reagents on the surface of the CNT affect its cellular influences, particularly the induction of oxidative stress.

  8. Combination of surfactant enhanced soil washing and electro-Fenton process for the treatment of soils contaminated by petroleum hydrocarbons.

    Science.gov (United States)

    Huguenot, David; Mousset, Emmanuel; van Hullebusch, Eric D; Oturan, Mehmet A

    2015-04-15

    In order to improve the efficiency of soil washing treatment of hydrocarbon contaminated soils, an innovative combination of this soil treatment technique with an electrochemical advanced oxidation process (i.e. electro-Fenton (EF)) has been proposed. An ex situ soil column washing experiment was performed on a genuinely diesel-contaminated soil. The washing solution was enriched with surfactant Tween 80 at different concentrations, higher than the critical micellar concentration (CMC). The impact of soil washing was evaluated on the hydrocarbons concentration in the leachates collected at the bottom of the soil columns. These eluates were then studied for their degradation potential by EF treatment. Results showed that a concentration of 5% of Tween 80 was required to enhance hydrocarbons extraction from the soil. Even with this Tween 80 concentration, the efficiency of the treatment remained very low (only 1% after 24 h of washing). Electrochemical treatments performed thereafter with EF on the collected eluates revealed that the quasi-complete mineralization (>99.5%) of the hydrocarbons was achieved within 32 h according to a linear kinetic trend. Toxicity was higher than in the initial solution and reached 95% of inhibition of Vibrio fischeri bacteria measured by Microtox method, demonstrating the presence of remaining toxic compounds even after the complete degradation. Finally, the biodegradability (BOD₅/COD ratio) reached a maximum of 20% after 20 h of EF treatment, which is not enough to implement a combined treatment with a biological treatment process. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. SOL-Gel microspheres and nanospheres for controlled release applications

    International Nuclear Information System (INIS)

    Barbe, C.; Beyer, R.; Kong, L.; Blackford, M.; Trautman, R.; Bartlett, J.

    2002-01-01

    We present a novel approach to the synthesis of inorganic sol-gel microspheres for encapsulating organic and bioactive molecules, and controlling their subsequent release kinetics. The bioactive species are incorporated, at ambient temperature, into the inorganic particles using an emulsion gelation process. Independent control of the release rate (by adapting the nanostructure of the internal pore network to the physico-chemical properties of the bioactive molecules) and particle size (by tailoring the emulsion chemistry) is demonstrated. Sol-gel chemistry has been shown to be a flexible technique for producing inorganic silica matrices with tailored microstructures, which can be used for the encapsulation and controlled release of organic and bioactive molecules. The present paper extends this concept by combining sol-gel chemistry with an emulsion approach for producing inorganic particles with controlled dimensions, and demonstrates how the particle size and microstructure can be independently controlled. Sol-Gel Chemistry and Encapsulation of Model Compounds. A stock solution of 4-(2-hydroxy-l-naphthylazo) benzene sulfonic acid (Orange II) was produced by dissolving Orange II in water (0.1 wt%), and adjusting the pH to the required value. Sol-gel solutions were subsequently prepared by mixing the aqueous solution with tetramethylorthosilicate (TMOS) and methanol (MeOH), to achieve H 2 O:TMOS (W] and MeOH:TMOS mole ratios (D) of four. The resulting solution was stirred and left to age at ambient temperature for one day. A transparent emulsion was prepared by mixing selected surfactants and organic solvents. The surfactants used included sorbitan monooleate, sorbitan monolaurate and bis-2-ethylhexylsulfo-succinate (AOT), while the organic phase was typically chosen from the group consisting of kerosene, hexane, heptane, octane, decane, dodecane and cyclohexane. The sol-gel solution was added to the emulsion, and the resulting mixture was stirred at 500 rpm for

  10. Quantitative determination of BAF312, a S1P-R modulator, in human urine by LC-MS/MS: prevention and recovery of lost analyte due to container surface adsorption.

    Science.gov (United States)

    Li, Wenkui; Luo, Suyi; Smith, Harold T; Tse, Francis L S

    2010-02-15

    Analyte loss due to non-specific binding, especially container surface adsorption, is not uncommon in the quantitative analysis of urine samples. In developing a sensitive LC-MS/MS method for the determination of a drug candidate, BAF312, in human urine, a simple procedure was outlined for identification, confirmation and prevention of analyte non-specific binding to a container surface and to recover the 'non-specific loss' of an analyte, if no transfer has occurred to the original urine samples. Non-specific binding or container surface adsorption can be quickly identified by using freshly spiked urine calibration standards and pre-pooled QC samples during a LC-MS/MS feasibility run. The resulting low recovery of an analyte in urine samples can be prevented through the use of additives, such as the non-ionic surfactant Tween-80, CHAPS and others, to the container prior to urine sample collection. If the urine samples have not been transferred from the bulk container, the 'non-specific binding' of an analyte to the container surface can be reversed by the addition of a specified amount of CHAPS, Tween-80 or bovine serum albumin, followed by appropriate mixing. Among the above agents, Tween-80 is the most cost-effective. beta-cyclodextrin may be suitable in stabilizing the analyte of interest in urine via pre-treating the matrix with the agent. However, post-addition of beta-cyclodextrin to untreated urine samples does not recover the 'lost' analyte due to non-specific binding or container surface adsorption. In the case of BAF312, a dynamic range of 0.0200-20.0 ng/ml in human urine was validated with an overall accuracy and precision for QC sample results ranging from -3.2 to 5.1% (bias) and 3.9 to 10.2% (CV), respectively. Pre- and post-addition of 0.5% (v/v) Tween-80 to the container provided excellent overall analyte recovery and minimal MS signal suppression when a liquid-liquid extraction in combination with an isocratic LC separation was employed. The

  11. FORMULASI MIKROEMULSI MINYAK DALAM AIR (O/W YANG STABIL MENGGUNAKAN KOMBINASI TIGA SURFAKTAN NON IONIK DENGAN NILAI HLB RENDAH, TINGGI DAN SEDANG Stable O/W Microemulsion Formulation Using Combination of Three Nonionic Surfactants with Low, High and Med

    Directory of Open Access Journals (Sweden)

    Sih Yuwanti

    2012-05-01

    Full Text Available The aim of this research was to determine the proportion of oil, surfactant and water which could produce a stable O/W microemulsion using combination of three nonionic surfactants with low, high and medium HLB values; and to determine the role of surfactant with a medium HLB value in O/W microemulsion formulation. The first group of microemulsions were prepared using combination of Tween 80, Span 80 and Span 40 (80 %:10 %:10 % with dif- ferent proportions of VCO:surfactant (1:3, 1:3.5 dan 1:4.  The second goups of microemulsion were prepared using combination of Tween 80, Span 80 and Span 40 (90 %:5 %:5 % with different proportions of VCO:surfactant 1:4,1:4.5 dan 1:5.  The stability of microemulsion was determined during storage at room temperature and after being ovened at 105 0C 5 hours and centrifuged at 2300 g 15 minutes. Microemulsion stability was determined by measur- ing absorbance of the microemulsion at 502 nm and then converted to turbidity (%.  In order to determine the role of surfactant with a medium HLB value in the formulation of O/W microemulsion, one set microemulsions were made without surfactant with a medium HLB value, and another set of microemulsions were prepared with different ratios of low and medium HLB surfactant (1:1, 2:1 and 1:2. The most stable microemulsion was achieved when the proportion of VCO:surfactant:water was 4:20:76 and combination of Tween 80:Span 80:Span 40 with the ratio of 90:3.33:6.67. A more stable O/W microemulsion could be obtained when surfactant with a medium HLB value was added to O/W microemulsion formulation. Surfactant with a medium HLB value would link the oil phase and water phase with sur- factant layer, interaction of surfactant-oil and surfactant-water increased. It provided a smooth transition between oil phase and water phase, and the microemulsion became more stable. ABSTRAK Tujuan dari penelitian ini adalah untuk menentukan proporsi minyak, surfaktan dan air yang dapat

  12. A statistical experimental design approach to evaluate the influence of various penetration enhancers on transdermal drug delivery of buprenorphine

    Directory of Open Access Journals (Sweden)

    S.Mojtaba Taghizadeh

    2015-03-01

    Full Text Available A series of drug-in-adhesive transdermal drug delivery systems (patch with different chemical penetration enhancers were designed to deliver drug through the skin as a site of application. The objective of our effort was to study the influence of various chemical penetration enhancers on skin permeation rate and adhesion properties of a transdermal drug delivery system using Box–Behnken experimental design. The response surface methodology based on a three-level, three-variable Box–Behnken design was used to evaluate the interactive effects on dependent variables including, the rate of skin permeation and adhesion properties, namely peel strength and tack value. Levulinic acid, lauryl alcohol, and Tween 80 were used as penetration enhancers (patch formulations, containing 0–8% of each chemical penetration enhancer. Buprenorphine was used as a model penetrant drug. The results showed that incorporation of 20% chemical penetration enhancer into the mixture led to maximum skin permeation flux of buprenorphine from abdominal rat skin while the adhesion properties decreased. Also that skin flux in presence of levulinic acid (1.594 μg/cm2 h was higher than Tween 80 (1.473 μg/cm2 h and lauryl alcohol (0.843 μg/cm2 h, and in mixing these enhancers together, an additional effect was observed. Moreover, it was found that each enhancer increased the tack value, while levulinic acid and lauryl alcohol improved the peel strength but Tween 80 reduced it. These findings indicated that the best chemical skin penetration enhancer for buprenorphine patch was levulinic acid. Among the designed formulations, the one which contained 12% (wt/wt enhancers exhibited the highest efficiency.

  13. Skin Permeation Enhancers and their Effects on Narcotic Transdermal Drug Delivery Systems through Response Surface Experimental Design

    Directory of Open Access Journals (Sweden)

    A. Moghimi

    2014-02-01

    Full Text Available Drug delivery through skin is often obstructed by low permeability of skin towards most drugs; however, such problem would be solved by application of skin penetration enhancers in the formulations. In the present study, a drug in adhesive patch with buprenorphine as active ingredient was prepared. Drug-in-adhesive transdermal drug delivery systems with different chemical penetration enhancers were designed. For this purpose a response-surface experimental design was used. Response surface methodology based on a three-level, three-variable Box–Behnken design was used to evaluate the interactive effects of dependent variables such as: the rate of skin permeation and adhesion properties including peel strength and tack value. The parameters such as drug release and adhesion were used as independent variables. Levulinic acid, lauryl alcohol and Tween 80 were used as penetration enhancers. In order to prepare samples, buprenorphine with constant concentration was incorporated into acrylic pressure sensitive adhesive with carboxylic functionality and this mixture was added to chemical penetration enhancer with different concentrations. The results show that the cumulative amount of drug release in presence of Tween 80 is 462.9 ± 0.006 μg so it is higher than cumulative amount of drug release in presence of levulinic acid (357.9 ± 0.005 μg and lauryl alcohol (269.5 ± 0.001 μg. Results of adhesion properties such as peel strength and tack reveal that using levulinic acid and lauryl alcohol will increase peel strength while Tween 80 will decrease it. Besides, the results show that all these permeation enhancers have increased tack values.

  14. Do oil-in-water (O/W) nano-emulsions have an effect on survival and growth of bacteria?

    Science.gov (United States)

    Kadri, Hani El; Devanthi, Putu Virgina Partha; Overton, Tim W; Gkatzionis, Konstantinos

    2017-11-01

    Nano-emulsions (typically droplet diameternano-emulsions even in reference to similar microbial species and formulations. Following up, this study aimed to investigate the effect of nano-emulsions on four bacterial species (Staphylococcus epidermidis, Bacillus cereus, Lactobacillus acidophilus and five Escherichia coli strains) possessing different surface charge and hydrophobicity. Model oil-in-water (O/W) emulsions with different size of oil droplets were prepared with sunflower oil stabilised by polysorbate 80 (Tween80) emulsifier (hydrophilic), using high shear mixing followed by ultrasonication. The viability of bacteria was monitored by culture, membrane integrity was assessed with flow cytometric analysis with propidium iodide (PI) staining and fluorescence microscopy monitored the spatial distribution of cells within the O/W emulsions. The stability of the nano-O/W emulsions in the presence of bacteria was assessed by monitoring the droplet size [D (4, 3)] and creaming height. In contrast to other reports the survival and growth of bacteria was not affected by the size of the oil droplets, no damage to the bacterial membrane was evident with flow cytometry and emulsion stability was not affected by the presence of bacteria during 7days of storage. Furthermore, the antimicrobial activity of caprylic acid (CA) was compared between O/W coarse and nano-emulsions while varying the concentration of the hydrophilic surfactant Tween80. The activity of CA was similar in nano-emulsion and coarse emulsion; however, it was higher than in bulk oil and was reduced with increasing Tween80 concentration, suggesting that its efficacy is dictated by formulation rather than oil droplet size. The results demonstrated no enhanced antimicrobial activity due to nano-sized oil droplets and that conclusions on nano-emulsions should be taken with caution. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. [Identification of Candida dubliniensis strains using heat tolerance tests, morphological characteristics and molecular methods].

    Science.gov (United States)

    Arikan, Sevtap; Darka, Ozge; Hasçelik, Gülşen; Günalp, Ayfer

    2003-01-01

    Described in 1995, Candida dubliniensis is a novel Candida species closely related to Candida albicans due primarily to its ability to produce germ tube and chlamydospores. Given these phenotypic similarities between the two species, C. dubliniensis cannot be readily distinguished from Candida albicans by routine laboratory work-up. We explored the frequency of isolation of C. dubliniensis among 213 strains previously defined as C. albicans based on their ability to produce germ tube. The test isolates were initially examined for their morphological features on cornmeal tween 80 agar, inability to grow at 45 degrees C, and the biochemical assimilation profile (ID 32C system, bioMerieux, France). Among all, 2 (0.9%) of the isolates were identified as C. dubliniensis based on the production of numerous chlamydospores in chains on cornmeal tween 80 agar and the lack of growth at 45 degrees C. The assimilation profile of these isolates was found to be in accordance with this identification. In an effort to confirm the identification, polymerase chain reaction (PCR) studies were carried out by using the C. dubliniensis specific primer set, DUBF and DUBR. Both of the isolates yielded C. dubliniensis-specific 288 base pair amplification products, confirming the previous identification obtained with the initial screening tests. The isolates were found to be susceptible to fluconazole and itraconazole, and generated amphotericin B minimal inhibitory concentrations of 0.5-1 microgram/ml by NCCLS M27-A2 microdilution method. These data suggest that the isolation rate of C. dubliniensis among our clinical isolates is low. The morphological features on cornmeal tween 80 agar and the lack of ability to grow at 45 degrees C appear as reliable, cheap, and practical screening tests in initial identification of C. dubliniensis among germ tube-producing Candida strains.

  16. Creating Drug Solubilization Compartments via Phase Separation in Multicomponent Buccal Patches Prepared by Direct Hot Melt Extrusion-Injection Molding.

    Science.gov (United States)

    Alhijjaj, Muqdad; Bouman, Jacob; Wellner, Nikolaus; Belton, Peter; Qi, Sheng

    2015-12-07

    Creating in situ phase separation in solid dispersion based formulations to allow enhanced functionality of the dosage form, such as improving dissolution of poorly soluble model drug as well as being mucoadhesive, can significantly maximize the in vitro and in vivo performance of the dosage form. This formulation strategy can benefit a wide range of solid dosage forms for oral and alternative routes of delivery. This study using buccal patches as an example created separated phases in situ of the buccal patches by selecting the excipients with different miscibility with each other and the model drug. The quaternary dispersion based buccal patches containing PEG, PEO, Tween 80, and felodipine were prepared by direct hot melt extrusion-injection molding (HME-IM). The partial miscibility between Tween 80 and semicrystalline PEG-PEO led to the phase separation after extrusion. The Tween phases acted as drug solubilization compartments, and the PEG-PEO phase had the primary function of providing mucoadhesion and carrier controlled dissolution. As felodipine was preferably solubilized in the amorphous regions of PEG-PEO, the high crystallinity of PEG-PEO resulted in an overall low drug solubilizing capacity. Tween 80 was added to improve the solubilization capacity of the system as the model drug showed good solubility in Tween. Increasing the drug loading led to the supersaturation of drug in Tween compartments and crystalline drug dispersed in PEG-PEO phases. The spatial distribution of these phase-separated compartments was mapped using X-ray micro-CT, which revealed that the domain size and heterogeneity of the phase separation increased with increasing the drug loading. The outcome of this study provides new insights into the applicability of in situ formed phase separation as a formulation strategy for the delivery of poorly soluble drugs and demonstrated the basic principle of excipient selection for such technology.

  17. Antioxidant Activity and Thermal Stability of Oleuropein and Related Phenolic Compounds of Olive Leaf Extract after Separation and Concentration by Salting-Out-Assisted Cloud Point Extraction

    Directory of Open Access Journals (Sweden)

    Konstantinos Stamatopoulos

    2014-04-01

    Full Text Available A fast, clean, energy-saving, non-toxic method for the stabilization of the antioxidant activity and the improvement of the thermal stability of oleuropein and related phenolic compounds separated from olive leaf extract via salting-out-assisted cloud point extraction (CPE was developed using Tween 80. The process was based on the decrease of the solubility of polyphenols and the lowering of the cloud point temperature of Tween 80 due to the presence of elevated amounts of sulfates (salting-out and the separation from the bulk solution with centrifugation. The optimum conditions were chosen based on polyphenols recovery (%, phase volume ratio (Vs/Vw and concentration factor (Fc. The maximum recovery of polyphenols was in total 95.9%; Vs/Vw was 0.075 and Fc was 15 at the following conditions: pH 2.6, ambient temperature (25 °C, 4% Tween 80 (w/v, 35% Na2SO4 (w/v and a settling time of 5 min. The total recovery of oleuropein, hydroxytyrosol, luteolin-7-O-glucoside, verbascoside and apigenin-7-O-glucoside, at optimum conditions, was 99.8%, 93.0%, 87.6%, 99.3% and 100.0%, respectively. Polyphenolic compounds entrapped in the surfactant-rich phase (Vs showed higher thermal stability (activation energy (Ea 23.8 kJ/mol compared to non-entrapped ones (Ea 76.5 kJ/mol. The antioxidant activity of separated polyphenols remained unaffected as determined by the 1,1-diphenyl-2-picrylhydrazyl method.

  18. Vehicle-Dependent Disposition Kinetics of Fluoranthene in Fisher-344 Rats

    Directory of Open Access Journals (Sweden)

    Aramandla Ramesh

    2008-03-01

    Full Text Available The objective of this study was to evaluate how the vehicles of choice affect the pharmacokinetics of orally administered Fluoranthene [FLA] in rats. Fluoranthene is a member of the family of polycyclic aromatic hydrocarbon chemicals. Fluoranthene exposure to humans may occur as a result of cigarette smoking, consumption of contaminated food and water, heating woods in stoves and boilers, industrial sources such as coal gasification, carbon and graphite electrode manufacturing. Adult male Fisher-344 rats were given single oral doses of 25 and 50 μg/kg FLA in tricaprylin, peanut oil, cod liver oil, tween 80/isotonic saline (1:5 and 2% Alkamuls-EL620 through gavage. After administration, the rats were housed individually in metabolic cages and sacrificed at 2, 4, 6, 8, 10 and 12 hours post FLA exposure. Blood, lung, liver, small intestine, adipose tissue samples, urine, and feces were collected at each time point. Samples were subjected to a liquid-liquid extraction using methanol, chloroform, and water. The extracts were analyzed by a reverse-phase HPLC, equipped with a fluorescence detector. The results revealed a dose-dependent increase in FLA concentrations in plasma and tissues for all the vehicles used. Plasma and tissue FLA concentrations were greater for peanut oil; cod liver oil, and tricaprylin vehicles compared to Alkamuls (p peanut oil > tricaprylin > alkamuls > tween 80/isotonic saline (1:5]. These findings suggest that uptake and elimination of FLA is accelerated when administered through oil-based vehicles. The low uptake of FLA from alkamuls and tween 80/isotonic saline may have been a result of the poor solubility of the chemical. In summary, our findings reiterate that absorption characteristics of FLA were governed by the dose as well as the dosing vehicle. The vehicle-dependent bioavailability of FLA suggests a need for the judicious selection of vehicles in evaluating oral toxicity studies for risk assessment purposes.

  19. Effects of ionic and nonionic surfactants on milk shell wettability during co-spray-drying of whole milk particles.

    Science.gov (United States)

    Lallbeeharry, P; Tian, Y; Fu, N; Wu, W D; Woo, M W; Selomulya, C; Chen, X D

    2014-09-01

    Mixing surfactants with whole milk feed before spray drying could be a commercially favorable approach to produce instant whole milk powders in a single step. Pure whole milk powders obtained directly from spray drying often have a high surface fat coverage (up to 98%), rendering them less stable during storage and less wettable upon reconstitution. Dairy industries often coat these powders with lecithin, a food-grade surfactant, in a secondary fluidized-bed drying stage to produce instant powders. This study investigated the changes in wetting behavior on the surface of a whole milk particle caused by the addition of surfactants before drying. Fresh whole milk was mixed with 0.1% (wt/wt) Tween 80 or 1% (wt/wt) lecithin (total solids), and the wetting behavior of the shell formed by each sample was captured using a single-droplet drying device at intermediate drying stages as the shell was forming. The addition of surfactants improved shell wettability from the beginning of shell formation, producing more wettable milk particles after drying. The increase in surfactant loading by 10 times reduced the wetting time from around 30s to 30s). We proposed that Tween 80 could adsorb at the oil-water interface of fat globules, making the surface fat more wettable, whereas lecithin tends to combine with milk proteins to form a complex, which then competes for the air-water surface with fat globules. Spray-drying experiments confirmed the greatly improved wettability of whole milk powders by the addition of either 0.1% (wt/wt) Tween 80 or 1% (wt/wt) lecithin; wetting time was reduced from 35±4s to drying system has been used to elucidate the complex interactions between ionic or nonionic surfactants and milk components (both proteins and fat), as well as the resultant effect on the development of milk particle functionality during drying. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  20. A statistical experimental design approach to evaluate the influence of various penetration enhancers on transdermal drug delivery of buprenorphine.

    Science.gov (United States)

    Taghizadeh, S Mojtaba; Moghimi-Ardakani, Ali; Mohamadnia, Fatemeh

    2015-03-01

    A series of drug-in-adhesive transdermal drug delivery systems (patch) with different chemical penetration enhancers were designed to deliver drug through the skin as a site of application. The objective of our effort was to study the influence of various chemical penetration enhancers on skin permeation rate and adhesion properties of a transdermal drug delivery system using Box-Behnken experimental design. The response surface methodology based on a three-level, three-variable Box-Behnken design was used to evaluate the interactive effects on dependent variables including, the rate of skin permeation and adhesion properties, namely peel strength and tack value. Levulinic acid, lauryl alcohol, and Tween 80 were used as penetration enhancers (patch formulations, containing 0-8% of each chemical penetration enhancer). Buprenorphine was used as a model penetrant drug. The results showed that incorporation of 20% chemical penetration enhancer into the mixture led to maximum skin permeation flux of buprenorphine from abdominal rat skin while the adhesion properties decreased. Also that skin flux in presence of levulinic acid (1.594 μg/cm(2) h) was higher than Tween 80 (1.473 μg/cm(2) h) and lauryl alcohol (0.843 μg/cm(2) h), and in mixing these enhancers together, an additional effect was observed. Moreover, it was found that each enhancer increased the tack value, while levulinic acid and lauryl alcohol improved the peel strength but Tween 80 reduced it. These findings indicated that the best chemical skin penetration enhancer for buprenorphine patch was levulinic acid. Among the designed formulations, the one which contained 12% (wt/wt) enhancers exhibited the highest efficiency.

  1. Surfactant flushing remediation of o-dichlorobenzene and p-dichlorobenzene contaminated soil.

    Science.gov (United States)

    Pei, Guangpeng; Zhu, Yuen; Cai, Xiatong; Shi, Weiyu; Li, Hua

    2017-10-01

    Surfactant-enhanced remediation is used to treat dichlorobenzene (DCB) contaminated soil. In this study, soil column experiments were conducted to investigate the removal efficiencies of o-dichlorobenzene (o-DCB) and p-dichlorobenzene (p-DCB) from contaminated soil using micellar solutions of biosurfactants (saponin, alkyl polyglycoside) compare to a chemically synthetic surfactant (Tween 80). Leachate was collected and analyzed for o-DCB and p-DCB content. In addition, soil was analyzed to explore the effect of surfactants on soil enzyme activities. Results showed that the removal efficiency of o-DCB and p-DCB was highest for saponin followed by alkyl polyglycoside and Tween 80. The maximum o-DCB and p-DCB removal efficiencies of 76.34% and 80.43%, respectively, were achieved with 4 g L -1 saponin solution. However, an opposite result was observed in the cumulative mass of o-DCB and p-DCB in leachate. The cumulative extent of o-DCB and p-DCB removal by the biosurfactants saponin and alkyl polyglycoside was lower than that of the chemically synthetic surfactant Tween 80 in leachate. Soil was also analyzed to explore the effect of surfactants on soil enzyme activities. The results indicated that surfactants were potentially effective in facilitating soil enzyme activities. Thus, it was confirmed that the biosurfactants saponin and alkyl polyglycoside could be used for remediation of o-DCB and p-DCB contaminated soil. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Comparative study of different application methods of 14C-Fosthiazate in tomato plants

    International Nuclear Information System (INIS)

    Nitesh Sharma; Surendra Kumar

    2011-01-01

    A comparative study of different application methods of nematicide 14 C-Fosthiazate was done for the uptake in tomato plants in two varieties Pusa Ruby and Pusa Early Dwarf. The application methods used for the research purpose are seed treatment, soil supplication and drip application in presence and absence of surfactant (Tween-80).It as found that percent absorption was the highest in the drip irrigation method in presence of surfactant. The percent uptake of 14 C-Fosthiazate in two varieties of tomato plants was found to be higher in Pusa Early Dwarf in all the treatment methods. (author)

  3. PENGEMBANGAN SISTEM NANOSTRUCTURED LIPID CARRIERS (NLC) MELOXICAM DENGAN LIPID MONOSTEARIN DAN MIGLYOL 808 MENGGUNAKAN METODE EMULSIFIKASI

    OpenAIRE

    Rahmi Annisa; Esti Hendradi; Dewi Melani

    2016-01-01

    The aim this study was to determine the effect of Monostearin and Miglyol 808 lipid ratio in NLC system formulation resulting in physicochemical characteristics, release rate, and penetration rate. The NLC making was done by using emulsification method. In the formulation of NLC meloxicam, 3 different lipid ratios were used, including ratios of 6:4, 7:3, 8:2.  Meloxicam served as active ingredient, monostearin served as solid lipid, miglyol 808 served as a liquid lipid, and tween 80 was surfa...

  4. Partial characterization of amylases of two indigenous Central Amazonian rhizobia strains

    Directory of Open Access Journals (Sweden)

    Arlem Nascimento de Oliveira

    2010-02-01

    Full Text Available Amylase production and partial characterization of crude enzyme preparations from two rhizobia strains (R-926 and R-991 were evaluated. For both the strains, maximal amylase activities were achieved during the early-to-mid- exponential growth phase; both were active over a pH range from 4.5 to 8.5 and temperature from 30 to 50 ºC. None of the ions studied (K+, Na+, Ca2+, Hg2+, Mg2+, Mn2+, Cu2+ and Zn2+ was required for the catalytic activity of strain R-926; amylase activity of strain R-991 was stimulated in the presence of K+, Hg2+ and Zn2+. The surfactants SDS, Triton X-100 and Tween-80 did not have a pronounced inhibitory effect on enzyme activities; SDS and Tween-80 caused the highest stimulatory effects. Amylase activities from the rhizobia strains were reduced by up to 30% in the presence of EDTA; amylase activity of R-926 was also inhibited by HgCl2, suggesting that Ca2+and cysteine residues could be important for activity of this strain.A produção e parcial caracterização de extratos brutos de amilase de duas estirpes de rizóbio (R-926 e R-991 foram avaliadas. Para ambas as estirpes, as máximas atividades amilolíticas foram obtidas no início/meio da fase exponencial de crescimento. As amilases rizobiais foram ativas numa variação de pH de 4,5 a 8,5 e temperatura de 30 a 50 ºC. Nenhum dos íons testados (K+, Na+, Ca2+, Hg2+, Mg2+, Mn2+, Cu2+ e Zn2+ foi exigido para a atividade catalítica da estirpe R-926. A amilase produzida pelo R991 foi estimulada na presença de K+, Hg2+ e Zn2+. Os surfactantes SDS, Triton X-100 e Tween-80 não exerceram um pronunciado efeito inibitório sobre as atividades enzimáticas, e SDS e Tween-80 causaram os maiores efeitos estimulatórios. A atividade amilolítica rizobial foi reduzida em até 30% na presença de EDTA; a amilase produzida pela estirpe R-926 também foi inibida pelo HgCl2, sugerindo, ao menos em parte, a importância de Ca2+ e resíduos de cisteína na atividade amilolítica dessa

  5. Determination of ethamsylate in pharmaceutical preparations based on an auto-oxidation chemiluminescence reaction.

    Science.gov (United States)

    Yang, Fengzhen; Zhang, Chao; Baeyens, Willy R G; Zhang, Xinrong

    2002-10-15

    Strong chemiluminescence emission has been observed by mixing alkaline hydrolytic products of ethamsylate with Tween 80 in acidic rhodamine 6G solution. This phenomenon has been utilized to design a flow-injection chemiluminescence method for the determination of ethamsylate in a pharmaceutical preparation. Under the optimum conditions, the proposed procedure has a linear range between 0.05 and 2.0 microg ml(-1), with a detection limit of 0.02 microg ml(-1) for ethamsylate. The method was applied to the determination of ethamsylate in pharmaceutical preparations. The possible mechanism of this chemiluminescence reaction was proposed. Copyright 2002 Elsevier Science B.V.

  6. Fate, behaviour and toxicity of engineered nanomaterials in the environmental systems

    CSIR Research Space (South Africa)

    Musee, N

    2012-04-01

    Full Text Available ? Environmental risks of ENMs to biological organisms in the environment MUST satisfy two conditions: Hazard & Exposure ? Hazard (toxic effect): due to nano/bio interface ?interactions of ENMs with: Biomolecules, cell membranes, the cellular interior...., Langmuir, 2011, Effect of surface coating A: Unmodified AgNPs B: Modified SDS AgNPs Steric effects due to EDL, increased zeta potential and enhanced AgNPs stability DLS size measurements B: Modified Tween 80 AgNPs A: Unmodified AgNPs A: 0 ?L...

  7. Emulsifier type, metal chelation and pH affect oxidative stability of n-3-enriched emulsions

    DEFF Research Database (Denmark)

    Haahr, Anne-Mette; Jacobsen, Charlotte

    2008-01-01

    -enriched oil-in-water emulsion. The selected food emulsifiers were Tween 80, Citrem, sodium caseinate and lecithin. Lipid oxidation was evaluated by determination of peroxide values and secondary volatile oxidation products. Moreover, the zeta potential and the droplet sizes were determined. Twen resulted...... in the least oxidatively stable emulsions, followed by Citrem. When iron was present, caseinate-stabilized emulsions oxidized slower than lecithin emulsions at pH 3, whereas the opposite was the case at pH 7. Oxidation generally progressed faster at pH 3 than at pH 7, irrespective of the addition of iron. EDTA...

  8. STUDI CAMPURAN SURFACTANT UNTUK MENENTUKAN FUNGSI SOLUBILIZER DAN FIXATIVE PADA INDUSTRI PARFUM

    Directory of Open Access Journals (Sweden)

    K N Adli

    2016-03-01

    Full Text Available Kualitas parfum  ditentukan oleh kejernihan dan longlasting parfum. Campuran surfaktan dapat meningkatkan kualitas parfum dengan biaya produksi yang murah. Penelitian ini bertujuan untuk mengkaji rasio campuran surfaktan untuk menentukan fungsi solubilizer dan fixative. Bibit parfum yang digunakan dalam penelitian ini adalah eugenol, surfaktan dengan fungsi solubilizer adalah portasol 40 dan tween 80 sedangkan surfaktan dengan fungsi fixative adalah glucam P20 dan patchouli alkohol. Rasio yang digunakan pada penelitian ini antara lain rasio glucam p20 : portasol (r G/P, rasio portasol 40 : tween 80 (r P/T dan rasio glucam P20 : patchouli alkohol (r G/PA. Hasil penelitian menunjukkan campuran surfaktan dapat meningkatkan kejernihan dan longlasting parfum lebih baik daripada surfaktan tunggal. Optimasi menggunakan RSM didapatkan rasio campuran yang paling berpengaruh terhadap kejernihan adalah r P/T sedangkan rasio yang paling berpengaruh terhadap longlasting parfum adalah r G/PA. Hasil optimum dengan respon turbiditas r G/P = 3,59; r P/T = 0,48; r G/PA = 0,41 dan respon longlasting  r G/P = 4,51; r P/T = 0,40; r G/PA = 0,42 menghasilkan turbiditas 0,0489 NTU serta longlasting 3,68 jam.Perfume quality is determined by the clarity and longlasting perfume. Surfactant mixture can improve the quality of perfumes at low production costs. This study objectives are to examines the blending ratio surfactant and to determine the function of solubilizer and fixative. Perfume seeds used in this study is eugenol, surfactants with solubilizer function is Portasol 40 and Tween 80 while surfactant with fixative function are glucam P20 and patchouli alcohol. The ratio used in this study include glucam ratio P20: portasol (r G/P, the ratio portasol 40: tween 80 (rP/T and the ratio of glucam P20: patchouli alcohol (r G/PA. The results showed a mixture of surfactants may improve the clarity and longlasting perfume is better than a single surfactant. RSM

  9. [A stable reagent for the-single stage determination of inorganic phosphate].

    Science.gov (United States)

    Pupyshev, A B

    1991-01-01

    A recipe of a simple reagent for phosphorus detection has been developed, consisting of ammonium molybdate (4 mM), sulfuric acid (0.2 N), and Tween-80 (0.2%). The developing phosphate staining may be registered in 15 min at a wavelength of 350 nm. The product molar extinction is equal to 1.20.10(4) M-1.cm-1, this being close to that of molybdic blue. Phosphate staining is characterized by the stability of results and insensitivity to the presence of a number of substances used in enzymology. The prepared reagent is fit for experiments within a fortnight if stored in the cold.

  10. Identification and characterization of a GDSL esterase gene located proximal to the swr quorum-sensing system of Serratia liquefaciens MG1

    DEFF Research Database (Denmark)

    Riedel, K.; Talker-Huiber, D.; Givskov, Michael Christian

    2003-01-01

    direction, designated estA, which encodes an esterase that belongs to family II of lipolytic enzymes. EstA was heterologously expressed in Escherichia coli, and the substrate specificity of the enzyme was determined in crude extracts. With the aid of zymograms visualizing EstA on polyacrylamide gels...... and by the analysis of a transcriptional fusion of the estA promoter to the promoterless lux4B genes, we showed that expression of the esterase is not regulated by the swr quorum-sensing system. An estA mutant was generated and was found to exhibit growth defects on minimal medium containing Tween 20 or Tween 80...

  11. Electrodialytic remediation of polychlorinated biphenyls contaminated soil with iron nanoparticles and two different surfactants

    DEFF Research Database (Denmark)

    Gomes, Helena I.; Dias-Ferreira, Celia; Ottosen, Lisbeth M.

    2014-01-01

    Polychlorinated biphenyls (PCB) are persistent organic pollutants (POP) that strongly adsorb in soils and sediments. There is a need to develop new and cost-effective solutions for the remediation of PCB contaminated soils. The suspended electrodialytic remediation combined with zero valent iron......ZVI showed encouraging tendencies and a base is thus formed for further optimization towards a new method for remediation of PCB polluted soils....... nanoparticles (nZVI) could be a competitive alternative to the commonly adapted solutions of incineration or landfilling. Surfactants can enhance the PCB desorption, dechlorination, and the contaminated soil cleanup. In this work, two different surfactants (saponin and Tween 80) were tested to enhance PCB...

  12. Fungitoxic effect of essential oil from aroeira (Schinus terebinthifolius RADDI) on Colletotrichum gloeosporioides

    OpenAIRE

    Oliveira Junior, L.F.G; Santos, R.B.; Reis, F.O.; Matsumoto, S.T; Bispo, W.M.S.; Machado, L.P.; Oliveira, L.F.M.

    2013-01-01

    Neste trabalho foi avaliado o efeito do óleo essencial do fruto de Schinus terebinthifolius sobre o crescimento micelial do fungo Colletotrichum gloeosporioides in vitro, e no desenvolvimento da antracnose no período de pós-colheita em mamões. As diferentes concentrações de óleo foram diluídas em Tween 80 a 8%. No experimento in vitro foram preparados meios de cultura BDA nas concentrações de 0,05; 0,10; 0,25 e 0,50% do óleo essencial. O controle negativo foi realizado apenas com meio BDA e o...

  13. Potencial acaricida do óleo de andiroba Carapa guianensis Aubl. sobre fêmeas adultas ingurgitadas de Anocentor nitens Neumann, 1897 e Rhipicephalus sanguineus Latreille, 1806 Acaricide potencial of andiroba (Carapa guianensis Aubl. oil on engorged adult females of Anocentor nitens (Neumann, 1897 and Rhipicephalus sanguineus (Latreille, 1806

    Directory of Open Access Journals (Sweden)

    M.P.O. Farias

    2009-08-01

    Full Text Available Avaliou-se o potencial acaricida in vitro do óleo da semente da andiroba (Carapa guianensis sobre fêmeas ingurgitadas de Anocentor nitens (n=210 e Rhipicephalus sanguineus (n=140, coletadas manualmente, respectivamente, de equinos e de cães naturalmente infestados. Para o teste de imersão, empregaram-se cinco diluições do óleo de andiroba, 100%, 50%, 30%, 25% e 10%, em água destilada, utilizando-se tween 80 como dispersante. No teste com A. nitens, foram usadas três repetições para cada diluição, utilizando-se 10 fêmeas ingurgitadas para cada tratamento. No teste com R. sanguineus, usaram-se duas repetições, e formaram-se, ainda, dois grupos-controle para cada espécie de ixodídeo, um com água destilada e outro com tween 80 mais água destilada. Após os testes, as fêmeas foram mantidas em laboratório sob temperatura ambiente. Observou-se mortalidade das fêmeas ingurgitadas e redução de postura, neste caso, com ovos inférteis, demonstrando eficácia de 100% nas duas espécies em todas as diluições testadas. Os dados obtidos evidenciaram a potencialidade do uso do extrato de andiroba contra A. nitens e R. sanguineus.In vitro acaricide potential of the oil from andiroba seed (Carapa guianensis was evaluated on engorged females of Anocentor nitens (n=210 and Rhipicephalus sanguineus (n=140 manually collected, from horses and dogs naturally infested, respectively. Five dilutions, 100%, 50%, 30%, 25%, and 10% of andiroba seed oil in deionized water, using tween 80 as dispersant, were employed for the engorged females immersion test. For A. nitens test, three repetitions were made with each dilution, using 10 engorged females for each treatment, and two repetitions for R. sanguineus test. Two control groups were used for each tick species, one with deionized water and another one with tween 80 and deionized water. After the tests, the females were kept in the laboratory under room temperature. Engorged female mortality and

  14. Avaliação in vitro dos efeitos do óleo da semente de Carapa guianensis Aubl. sobre larvas de nematóides gastrintestinais de caprinos e ovinos In vitro evaluation of Carapa guianensis Aubl. seed oil effects on larvae from gastrointestinal nematodes of goats and sheep

    Directory of Open Access Journals (Sweden)

    M.P.O Farias

    2010-06-01

    Full Text Available Com objetivo de avaliar in vitro a ação do óleo da semente da Carapa guianensis (Andiroba no cultivo de larvas de nematóides gastrintestinais de animais das espécies caprina e ovina, foram testadas cinco diluições do óleo de andiroba (100, 50, 30, 25 e 10%, com três repetições por tratamento, utilizando-se tween 80 como dispersante, formando-se ainda três grupos controle, um controle negativo (água destilada, outro controle negativo (água destilada + tween 80 e um controle positivo (Doramectina. A atividade da andiroba sobre os ovos de nematóides gastrintestinais foi determinada pelo cálculo dos percentuais de redução de larvas por gramas de fezes. Os resultados revelaram na espécie caprina redução altamente efetiva no número de larvas totais para os tratamentos 100, 50 e 30% com médias nulas para todos os gêneros de nematóides. Na espécie ovina observou-se redução altamente efetiva no número de larvas totais em todos os tratamentos, com médias nulas nos tratamentos 100, 50 e 30%. Os resultados obtidos neste experimento demonstram que o óleo da semente de Carapa guianensis possui atividade in vitro contra larvas de nematóides gastrintestinais de caprinos e ovinos.This study aimed to evaluate the in vitro action of Carapa guianensis (Andiroba seed oil on the cultivation of larvae from gastrointestinal nematodes of goats and sheep. Five andiroba oil dilutions (100, 50, 30, 25, and 10% were assayed, with three replicates per treatment, using Tween 80 as surfactant. Three control groups were formed: a negative control (distilled water, another negative control (distilled water + Tween 80 and a positive control (Doramectin. The activity of andiroba on the eggs from gastrointestinal nematodes was obtained by calculating larva reduction percentages per gram of feces. In goats, a highly effective reduction in the total number of larvae was detected for treatments 100, 50 and 30%, with null means for all nematode genera

  15. Pharmacokinetic comparison of different flubendazole formulations in pigs: A further contribution to its development as a macrofilaricide molecule

    Directory of Open Access Journals (Sweden)

    L. Ceballos

    2015-12-01

    Full Text Available Despite the well established ivermectin activity against microfilaria, the success of human filariasis control programmes requires the use of a macrofilaricide compound. Different in vivo trials suggest that flubendazole (FLBZ, an anthelmintic benzimidazole compound, is a highly efficacious and potent macrofilaricide. However, since serious injection site reactions were reported in humans after the subcutaneous FLBZ administration, the search for alternative pharmaceutical strategies to improve the systemic availability of FLBZ has acquired special relevance both in human and veterinary medicine. The goal of the current experimental work was to compare the pharmacokinetic plasma behavior of FLBZ, and its metabolites, formulated as either an aqueous hydroxypropyl- β -cyclodextrin-solution (HPBCD, an aqueous carboxymethyl cellulose-suspension (CMC or a Tween 80-based formulation, in pigs. Animals were allocated into three groups and treated (2 mg/kg with FLBZ formulated as either a HPBCD-solution (oral, CMC-suspension (oral or Tween 80-based formulation (subcutaneous. Only trace amounts of FLBZ parent drug and its reduced metabolite were measured after administration of the different FLBZ formulations in pigs. The hydrolyzed FLBZ (H-FLBZ metabolite was the main analyte recovered in the bloodstream in pigs treated with the three experimental FLBZ formulations. The oral administration of the HPBCD-solution accounted for significantly higher (P < 0.05 Cmax and AUC (23.1 ± 4.4 μg h/mL values for the main metabolite (H-FLBZ, compared with those observed for the oral CMC-suspension (AUC = 3.5 ± 1.0 μg h/mL and injectable Tween 80-based formulation (AUC: 7.5 ± 1.7 μg h/mL. The oral administration of the HPBCD-solution significantly improved the poor absorption pattern (indirectly assessed as the H-FLBZ plasma concentrations observed after the oral administration of the FLBZ-CMC suspension or the subcutaneous injection of the

  16. Semiconductor particle mediated photoelectron transfers in bilayer lipid membranes

    International Nuclear Information System (INIS)

    Fendler, J.H.; Baral, S.

    1989-01-01

    This paper discusses semiconductor particles in situ generated on the cis surface of glyceryl monooleate (GMO) bilayer lipid membranes (BLMs), that have been used to mediate photoelectric effects. The presence of semiconductors on the BLM surface is addressed. The observed photoelectric effects are rationalized and presented

  17. Impact of surfactants on the target recognition of Fab-conjugated PLGA nanoparticles.

    Science.gov (United States)

    Kennedy, Patrick J; Perreira, Ines; Ferreira, Daniel; Nestor, Marika; Oliveira, Carla; Granja, Pedro L; Sarmento, Bruno

    2018-06-01

    Targeted drug delivery with nanoparticles (NPs) requires proper surface ligand presentation and availability. Surfactants are often used as stabilizers in the production of targeted NPs. Here, we evaluated the impact of surfactants on ligand functionalization and downstream molecular recognition. Our model system consisted of fluorescent poly(lactic-co-glycolic acid) (PLGA) NPs that were nanoprecipitated in one of a small panel of commonly-used surfactants followed by equivalent washes and conjugation of an engineered Fab antibody fragment. Size, polydispersity index and zeta potential were determined by dynamic light scattering and laser Doppler anemometry, and Fab presence on the NPs was assessed by enzyme-linked immunosorbent assay. Most importantly, Fab-decorated NP binding to the cell surface receptor was monitored by fluorescence-activated cell sorting. 2% polyvinyl alcohol, 1% sodium cholate, 0.5% Pluronic F127 (F127) and 2% Tween-80 were initially tested. Of the four surfactants tested, PLGA NPs in 0.5% F127 and 2% Tween-80 had the highest cell binding. These two surfactants were then retested in two different concentrations, 0.5% and 2%. The Fab-decorated PLGA NPs in 2% F127 had the highest cell binding. This study highlights the impact of common surfactants and their concentrations on the downstream targeting of ligand-decorated NPs. Similar principles should be applied in the development of future targeted nanosystems where surfactants are employed. Copyright © 2018 Elsevier B.V. All rights reserved.

  18. ISOLASI DAN KARAKTERISASI PROTEASE ALKALIN DARI ISOLAT BAKTERI LIMBAH TERNAK DI EXFARM FAKULTAS PETERNAKAN UNSOED

    Directory of Open Access Journals (Sweden)

    Zusfahair

    2011-05-01

    Full Text Available Protease is one of the widely used enzymes for the industry. The potential resource of microorganism that produced protease is milk cow waste. In this research, isolation and characterization has been done toward isolated protease from milk cow waste of the Exfarm’s Animal Husbandry Faculty at University of Jenderal Soedirman, Purwokerto. The research used experiment method and the parameters observed were the genus of bacteria which produce protease and the activity of protease. The characterizations of protease were determination of optimum pH and temperature, the influence of metal ions, EDTA, surfactant, and commercial detergent toward enzyme activity, and also the study of enzyme stability. The results from the research showed that the isolated bacteria from the Exfarm’s of Animal Husbandry Faculty of UNSOED, which produced protease was Salmonella sp. Characterization of isolated Salmonella sp. from 45% ammonium sulphate fraction indicated that the optimum temperature was 50 ºC, optimum pH was 8, the enzyme was activated by Ca2+ dan Mg2+ ion, whereas it was inhibited by Zn2+, Cu2+ ions and EDTA. The addition of Tween-80 with the concentration of 0.2% and 0.4% increased protease activity, however the addition of Tween-80 with concentration higher than 0.6% decreased the protease activity. Enzyme protease from isolated Salmonella sp. was relatively stable with the addition of commercial detergent such as Attack, Surf, and Bukrim.

  19. Formulation of avanafil in a solid self-nanoemulsifying drug delivery system for enhanced oral delivery.

    Science.gov (United States)

    Soliman, Kareem AbuBakr; Ibrahim, Howida Kamal; Ghorab, Mahmoud Mohammed

    2016-10-10

    Avanafil was incorporated into solid self-nanoemulsifying systems with the aim of improving its oral bioavailability. Labrafil, Labrafac, and Miglyol 812 N were investigated as oils, Tween 80 and Cremophor EL as surfactants, and Transcutol HP as a co-surfactant. Nine formulations produced clear solutions of 13.89-38.09nm globules after aqueous dilution. Adsorption of preconcentrate onto Aeroperl 300 Pharma at a 2:1 ratio had no effect on nanoemulsion particle size. Differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy indicated that avanafil was molecularly dispersed within the solid nanosystems. A formulation containing 10% Labrafil, 60% Tween 80, and 30% Transcutol HP had the highest drug loading (44.48mg/g) and an acceptable in vitro dissolution profile (96.42% within 30min). This formulation was chemically and physically stable for 6months under accelerated storage conditions and it produced a 3.2-fold increase in bioavailability in rabbits, as compared to conventional commercially available avanafil tablets (Spedra(®)). Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Remediation of soil co-contaminated with petroleum and heavy metals by the integration of electrokinetics and biostimulation.

    Science.gov (United States)

    Dong, Zhi-Yong; Huang, Wen-Hui; Xing, Ding-Feng; Zhang, Hong-Feng

    2013-09-15

    Successful remediation of soil co-contaminated with high levels of organics and heavy metals is a challenging task, because that metal pollutants in soil can partially or completely suppress normal heterotrophic microbial activity and thus hamper biodegradation of organics. In this study, the benefits of integrating electrokinetic (EK) remediation with biodegradation for decontaminating soil co-contaminated with crude oil and Pb were evaluated in laboratory-scale experiments lasting for 30 days. The treated soil contained 12,500 mg/kg of total petroleum hydrocarbons (TPH) and 450 mg/kg Pb. The amendments of EDTA and Tween 80, together with a regular refreshing of electrolyte showed the best performance to remediate this contaminated soil. An important function of EDTA-enhanced EK treatment was to eliminate heavy metal toxicity from the soil, thus activating microbial degradation of oil. Although Tween 80 reduced current, it could serve as a second substrate for enhancing microbial growth and biodegradation. It was found that oil biodegradation degree and microbial numbers increased toward the anode and cathode. Microbial metabolism was found to be beneficial to metal release from the soil matrix. Under the optimum conditions, the soil Pb and TPH removal percentages after 30 days of running reached 81.7% and 88.3%, respectively. After treatment, both the residual soil Pb and TPH concentrations met the requirement of the Chinese soil environmental quality standards. Copyright © 2013 Elsevier B.V. All rights reserved.

  1. The effect of formulative parameters on the size and physical stability of SLN based on "green" components.

    Science.gov (United States)

    Soddu, Elena; Rassu, Giovanna; Cossu, Massimo; Giunchedi, Paolo; Cerri, Guido; Gavini, Elisabetta

    2016-01-01

    Cocoa butter (CB) is a largely used excipient in pharmaceutical field. Aim of this work was to set formulative parameters for the preparation of SLN based on "green" lipid matrix for drug delivery as natural, both human and environmental safe systems. Double emulsion technique (w1/o/w2) was selected for SLN preparation. The effect on the dimensional properties of different surfactants (Tween 80 and PEG 40 monostearate) and co-surfactants (PEG400 monostearate, Emulium® Kappa2 and Plurol®Stearique) at different concentrations was evaluated. Stability tests were performed. SLN dispersions were exsiccated and the effect of the dried process on SLN size was evaluated. The influence of temperature on SLN dimensions was investigated at 37 °C. MTT test was performed on raw materials and formulations. The w1/o/w2 is suitable, rapid and economic technique for the preparation of CB SLN. Tween 80-Plurol Stearique combination gives the best results: particles size less than 400 nm and PI of about 0.4 are obtained when PS 2% is used. Both raw materials and formulations are safe. The importance to evaluate the effect of different surfactant and/or co-surfactant on the dimensional properties of SLN is evident by selecting substances with preferable safety profiles, and favorable environmental properties to develop stable "green" SLN.

  2. Formulation and optimization of mucoadhesive microemulsion containing mirtazapine for intranasal delivery

    Directory of Open Access Journals (Sweden)

    Hetal P Thakkar

    2014-01-01

    Full Text Available Background: Mirtazapine, an antidepressant drug, has absolute bioavailability of only 50% due to high first pass metabolism. Aim: The purpose of this study was to develop and optimize mucoadhesive microemulsion containing mirtazapine for intranasal delivery. Materials and Methods: Based on solubility study, Capmul Medium chain Monoglyceride, Tween 80 and polyethylene glycol (PEG 400 were selected as oil, surfactant and co surfactant respectively. Microemulsions were prepared using water titration method. 3:1% w/w ratio (Tween 80: PEG 400 was selected for formulation development. The prepared microemulsions were optimized for globule size, zeta potential, % transmittance and polydispersity index. The optimized batch was further characterized for % drug content, conductivity and transmission electron microscopy. Results and Conclusion: All the parameters showed the suitability of microemulsion of mirtazapine for intranasal delivery. Chitosan (0.5% w/w was used as a polymer for the preparation of mucoadhesive microemulsion to enhance the retention time in the nasal mucosa. Results of nasal toxicity study using excised sheep nasal mucosa showed comparatively no damage to epithelium and so formulation was considered safe for nasal administration. mirtazapine mucoadhesive microemulsion showed the highest percentage of diffusion (57.11 ± 0.710% after 210 min during in-vitro drug diffusion study through sheep nasal mucosa, followed by mirtazapine microemulsion (46.08 ± 0.674% and finally by mirtazapine solution (17.63 ± 0.612%.

  3. Evolution and role of corded cell aggregation in Mycobacterium tuberculosis cultures.

    Science.gov (United States)

    Caceres, Neus; Vilaplana, Cristina; Prats, Clara; Marzo, Elena; Llopis, Isaac; Valls, Joaquim; Lopez, Daniel; Cardona, Pere-Joan

    2013-11-01

    The aim of this study was to evaluate the evolution and role of corded cell aggregation in Mycobacterium tuberculosis cultures according to growth time and conditions. Thus, in standard culture using aerated 7H9 Middlebrook broth supplemented with 0.05% Tween 80, a dramatic CFU decrease was observed at the end of the exponential phase. This phase was followed by a stable stationary phase that led to dissociation between the optical density (O.D.) and CFU values, together with the formation of opaque colonies in solid culture. Further analysis revealed that this was due to cording. Scanning electron microscopy showed that cording led to the formation of very stable coiled structures and corded cell aggregations which proved impossible to disrupt by any of the physical means tested. Modulation of cording with a high but non-toxic concentration of Tween 80 led to a slower growth rate, avoidance of a sudden drop-off to the stationary phase, the formation of weaker cording structures and the absence of opaque colonies, together with a lower survival at later time-points. An innovative automated image analysis technique has been devised to characterize the cording process. This analysis has led to important practical consequences for the elaboration of M. tuberculosis inocula and suggests the importance of biofilm formation in survival of the bacilli in the extracellular milieu. Copyright © 2013. Published by Elsevier Ltd.

  4. Spectrophotometric determination of cobalt(II), nickel(II) and copper (II) with 1-(2 pyridylazo)-2-naphthol in micellar medium

    International Nuclear Information System (INIS)

    Shar, G.A.; Soomro, G.A.

    2004-01-01

    Spectrophotometric determination of cobalt(II), nickel(II) and copper(II) is carried out with 1-(2 pyridylazo)-2-naphthol as a complexing reagent in aqueous phase using non-ionic surfactant Tween 80. Beer's law is obeyed for Co(II), Ni(II) and Cu(II) over the range 0.5 - 4.0, 0.5 - 4.0 and 0.5 - 3.0 ngmL/sup -1/ with detection limit (2 σ) of 6.7, 3.2 and 3.9 ngmL/sup -1/. The max molar absorption, molar absorptivity, Sandell's sensitivity of Co(II), Ni(II) and Cu(II) are 580 nm, 570 nm and 555 nm; max (104 mol/sup -1/ cm /sup -1/) is 0.87, 1.8 and 1.6 and 6.8, 3.3 and 3.9 ng cm-2 respectively. The pH at which complex is formed for Co(II), Ni(II) and Cu(II) is 5, 5.5 and 6.5 respectively. The critical micelle concentration (CMC) of Tween 80 is 5%. The present method is compared with that of atomic absorption spectroscopy and no significant difference is noted between the two methods at 95% confidence level. The method has been applied to the determination of Co(II), Ni(II) and Cu(II) in industrial waste water and pharmaceutical samples. (author)

  5. Identification of newly isolated Talaromyces pinophilus and statistical optimization of β-glucosidase production under solid-state fermentation.

    Science.gov (United States)

    El-Naggar, Noura El-Ahmady; Haroun, S A; Oweis, Eman A; Sherief, A A

    2015-01-01

    Fungi able to degrade agriculture wastes were isolated from different soil samples, rice straw, and compost; these isolates were screened for their ability to produce β-glucosidase. The most active fungal isolate was identified as Talaromyces pinophilus strain EMOO 13-3. The Plackett-Burman design is used for identifying the significant variables that influence β-glucosidase production under solid-state fermentation. Fifteen variables were examined for their significances on the production of β-glucosidase in 20 experimental runs. Among the variables screened, moisture content, Tween 80, and (NH4)2SO4 had significant effects on β-glucosidase production with confidence levels above 90% (p fermentation conditions: substrate amount 0.5 (g/250 mL flask), NaNO3 0.5 (%), KH2PO4 0.3 (%), KCl 0.02 (%), MgSO4 · 7H2O 0.01 (%), CaCl2 0.01 (%), yeast extract 0.07 (%), FeSO4 · 7H2O 0.0002 (%), Tween 80 0.02 (%), (NH4)2SO4 0.3 (%), pH 6.5, temperature 25°C, moisture content 1 (mL/g dry substrate), inoculum size 0.5 (mL/g dry substrate), and incubation period 5 days.

  6. Effective Biotransformation of Ethyl 4-Chloro-3-Oxobutanoate into Ethyl (S)-4-Chloro-3-Hydroxybutanoate by Recombinant E. coli CCZU-T15 Whole Cells in [ChCl][Gly]-Water Media.

    Science.gov (United States)

    Dai, Yong; Huan, Bin; Zhang, Hai-Sheng; He, Yu-Cai

    2017-04-01

    To increase the biocatalytic activity of Escherichia coli CCZU-T15 whole cells, choline chloride/glycerol ([ChCl][Gly]) was firstly used as biocompatible solvent for the effective biotransformation of ethyl 4-chloro-3-oxobutanoate (COBE) into ethyl (S)-4-chloro-3-hydroxybutanoate [(S)-CHBE]. Furthermore, L-glutamine (150 mM) was added into [ChCl][Gly]-water ([ChCl][Gly] 12.5 vol%, pH 6.5) media instead of NAD + for increasing the biocatalytic efficiency. To further improve the biosynthesis of (S)-CHBE (>99 % e.e.) by E. coli CCZU-T15 whole cells, Tween-80 (7.5 mM) was also added into this reaction media, and (S)-CHBE (>9 % e.e.) could be effectively synthesized from 2000 and 3000 mM COBE in the yields of 100 and 93.0 % by whole cells of recombinant E. coli CCZU-T15, respectively. TEM image indicated that the cell membrane was permeabilized and lost its integrity and when the cell was exposed to [ChCl][Gly]-water media with Tween-80. Clearly, this bioprocess has high potential for the effective biosynthesis of (S)-CHBE (>99 % e.e.).

  7. Bioremediation of the oil spill polluted marine intertidal zone and its toxicity effect on microalgae.

    Science.gov (United States)

    Pi, Yongrui; Xu, Nana; Bao, Mutai; Li, Yiming; Lv, Dong; Sun, Peiyan

    2015-04-01

    Custom-designed devices with 0.6 m (L) × 0.3 m (W) × 0.4 m (H) and a microbial consortium were applied to simulate bioremediation on the oil spill polluted marine intertidal zone. After the bioremediation, the removal efficiency of n-alkanes and polycyclic aromatic hydrocarbon homologues in crude oil evaluated by GC-MS were higher than 58% and 41% respectively. Besides, the acute toxicity effects of crude oil on three microalgae, i.e. Dicrateria sp., Skeletonema costatum and Phaeodactylum tricornutum, varied with concentration. The effects of microbe and surfactant treated water on the three microalgae followed a decreasing order: the microbial consortium plus Tween-80 > the microbial consortium > Tween-80. During 96 h, the cell densities of the three microalgae in treated seawater increased from 4.0 × 10(5), 1.0 × 10(5) and 2.5 × 10(5) cells per mL to 1.7 × 10(6), 8.5 × 10(5) and 2.5 × 10(6) cells per mL, respectively, which illustrated that the quality of seawater contaminated by crude oil was significantly improved by the bioremediation.

  8. Olfactory response of Phytoseiulus persimilis (Acari: Phytoseiidae) to untreated and Beauveria bassiana-treated Tetranychus urticae (Acari: Tetranychidae).

    Science.gov (United States)

    Seiedy, Marjan; Saboori, Alireza; Zahedi-Golpayegani, Azadeh

    2013-06-01

    Determination of attraction and avoidance behavior of predators is important in concomitant use of multiple natural enemies to control a pest. The olfactory response of the predatory mite Phytoseiulus persimilis was studied to odors related to Tetranychus urticae adults infected by Beauveria bassiana DEBI008 in 0, 24, 48 and 72 h intervals, both in absence and in presence of plants. In plant-present experiments, P. persimilis attraction was neither towards adults of T. urticae infected by 0.02 % Tween 80 (as control), nor to the ones infected by B. bassiana for 0 or 24 h, whereas significant attraction towards the control was observed when tested against T. urticae infected by B. bassiana for 48 or 72 h. In absence of plants, P. persimilis displayed significant avoidance of T. urticae infected by B. bassiana for 48 or 72 h, when their alternative option was 0.02 % Tween 80-infected T. urticae adults. These results indicate that P. persimilis can recognize the presence of B. bassiana and that the predator avoids the fungus. This suggests that the two natural enemy species can be used together in biological control programmes.

  9. Effect of Food Emulsifiers on Aroma Release

    Directory of Open Access Journals (Sweden)

    Jia-Jia Li

    2016-04-01

    Full Text Available This study aimed to determine the influence of different emulsifiers or xanthan-emulsifier systems on the release of aroma compounds. Solid-phase microextraction (SPME and GC-MS were used to study the effects of varying concentrations of xanthan gum, sucrose fatty acid ester, Tween 80 and soybean lecithin on the release of seven aroma compounds. The effects of the emulsifier systems supplemented with xanthan gum on aroma release were also studied in the same way. The results showed varying degrees of influence of sucrose fatty acid ester, soybean lecithin, Tween 80 and xanthan gum on the release of aroma compounds. Compared with other aroma compounds, ethyl acetate was more likely to be conserved in the solution system, while the amount of limonene released was the highest among these seven aroma compounds. In conclusion, different emulsifiers and complexes showed different surface properties that tend to interact with different aroma molecules. The present studies showed that the composition and structure of emulsifiers and specific interactions between emulsifiers and aroma molecules have significant effects on aroma release.

  10. PAHs soil decontamination in two steps: desorption and electrochemical treatment.

    Science.gov (United States)

    Alcántara, M Teresa; Gómez, Jose; Pazos, Marta; Sanromán, M Angeles

    2009-07-15

    The presence of carcinogenic polycyclic aromatic hydrocarbons (PAHs) in soils poses a potential threat to human health if exposure levels are too high. Nevertheless, the removal of these contaminants presents a challenge to scientists and engineers. The high hydrophobic nature of PAHs enables their strong sorption onto soil or sediments. Thus, the use of surfactants could favour the release of sorbed hydrophobic organic compounds from contaminated soils. In this work, five surfactants, namely Brij 35, Tergitol NP10, Tween 20, Tween 80 and Tyloxapol, are evaluated on the desorption of PAHs [benzanthracene (BzA), fluoranthene (FLU), and pyrene (PYR), single and in mixture] from a model sample such as kaolin. In all cases, the best results were obtained when Tween 80 was employed. In order to obtain the global decontamination of PAHs, their electrochemical degradation is investigated. It is concluded that the order of increasing degradation for single compounds is BzA>FLU>PYR when they are subject to the same electrochemical treatment. In addition, there is a direct relationship between the ionization potential and the electrochemical degradation of PAH.

  11. Advantages of celecoxib nanosuspension formulation and transformation into tablets.

    Science.gov (United States)

    Dolenc, Andrej; Kristl, Julijana; Baumgartner, Sasa; Planinsek, Odon

    2009-07-06

    Drugs with low aqueous solubility and high permeability (BCS class II) present a high proportion of all drugs. This study examines the critical issues regarding engineering of a nanosuspension tailored to increase drug dissolution rate and its transformation into dry powder suitable for tabletting. Nanosuspensions of celecoxib, a selective COX-2 inhibitor with low water solubility, were produced by the emulsion-diffusion method using three different stabilizers (Tween) 80, PVP K-30 and SDS) and characterized by particle size analysis, dissolution testing, scanning electron microscopy imaging, differential scanning calorimetry and X-ray powder diffraction. Spray-dried nanosuspension was blended with microcrystalline cellulose, and compressed to tablets, and their tensile strength, porosity and elastic recovery of tablets were investigated. The selection of solvent and stabilizers is critical, firstly to achieve controlled crystallization and size, and secondly to increase the wettability of the hydrophobic drug. The crystalline nano-sized celecoxib alone or in tablets showed a dramatic increase of dissolution rate and extent compared to micronized. SEM images showed that the nanoparticle morphology was influenced by the choice of stabilizers. Celecoxib nanosuspension stabilized with PVP K-30 and SDS showed advantages over Tween 80 due to sticking of the dried product and unexpected changes observed on DSC curves. Markedly lower compaction forces are needed for nano-sized compared to micro-sized celecoxib to produce tablets of equal tensile strength.

  12. FeCl3-catalyzed ethanol pretreatment of sugarcane bagasse boosts sugar yields with low enzyme loadings and short hydrolysis time.

    Science.gov (United States)

    Zhang, Hongdan; Zhang, Shuaishuai; Yuan, Hongyou; Lyu, Gaojin; Xie, Jun

    2018-02-01

    An organosolv pretreatment system consisting of 60% ethanol and 0.025 mol·L -1 FeCl 3 under various temperatures was developed in this study. During the pretreatment, the highest xylose yield was 11.4 g/100 g raw material, representing 49.8% of xylose in sugarcane bagasse. Structural features of raw material and pretreated substrates were characterized to better understand how hemicellulose removal and delignification affected subsequent enzymatic hydrolysis. The 160 °C pretreated solid presented a remarkable glucose yield of 93.8% for 72 h. Furthermore, the influence of different additives on the enzymatic hydrolysis of pretreated solid was investigated. The results indicated that the addition of Tween 80 shortened hydrolysis time to 6 h and allowed a 50% reduction of enzyme loading to achieve the same level of glucose yield. This work suggested that FeCl 3 -catalyzed organosolv pretreatment could improve the enzymatic hydrolysis significantly and reduce the hydrolysis time and enzyme dosage with the addition of Tween 80. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Removal of Mercury by Foam Fractionation Using Surfactin, a Biosurfactant

    Directory of Open Access Journals (Sweden)

    Shashi B. Atla

    2011-11-01

    Full Text Available The separation of mercury ions from artificially contaminated water by the foam fractionation process using a biosurfactant (surfactin and chemical surfactants (SDS and Tween-80 was investigated in this study. Parameters such as surfactant and mercury concentration, pH, foam volume, and digestion time were varied and their effects on the efficiency of mercury removal were investigated. The recovery efficiency of mercury ions was highly sensitive to the concentration of the surfactant. The highest mercury ion recovery by surfactin was obtained using a surfactin concentration of 10 × CMC, while recovery using SDS required < 10 × CMC and Tween-80 >10 × CMC. However, the enrichment of mercury ions in the foam was superior with surfactin, the mercury enrichment value corresponding to the highest metal recovery (10.4% by surfactin being 1.53. Dilute solutions (2-mg L−1 Hg2+ resulted in better separation (36.4%, while concentrated solutions (100 mg L−1 enabled only a 2.3% recovery using surfactin. An increase in the digestion time of the metal solution with surfactin yielded better separation as compared with a freshly-prepared solution, and an increase in the airflow rate increased bubble production, resulting in higher metal recovery but low enrichment. Basic solutions yielded higher mercury separation as compared with acidic solutions due to the precipitation of surfactin under acidic conditions.

  14. In situ electro-osmotic cleanup of tar contaminated soil—Removal of polycyclic aromatic hydrocarbons

    KAUST Repository

    Lima, Ana T.

    2012-12-01

    An in situ electro-osmosis experiment was set up in a tar contaminated clay soil in Olst, the Netherlands, at the site of a former asphalt factory. The main goal of this experiment was to remove polycyclic aromatic hydrocarbons (PAHs) from the contaminated clay layer by applying an electric gradient of 12 V m-1 across the soil over an electrode distance of 1 m. With the movement of water by electro-osmosis and the addition of a non-ionic surfactant (Tween 80), the non-polar PAHs were dragged along by convection and removed from the fine soil fraction. Soil samples were taken at the start and after 159 days at the end of the experiment. Water at the electrode wells was sampled regularly during the course of the experiment. The results reflect the heterogeneity of the soil characteristics and show the PAH concentrations within the experimental set up. After first having been released into the anolyte solution due to extraction by Tween 80 and subsequent diffusion, PAH concentrations increased significantly in the electrode reservoirs at the cathode side after 90 days of experiment. Although more detailed statistical analysis is necessary to quantify the efficiency of the remediation, it can be concluded that the use of electro-osmosis together with a non-ionic surfactant is a feasible technique to mobilize non-polar organic contaminants in clayey soils. Crown Copyright © 2011 Published by Elsevier Ltd. All rights reserved.

  15. Increased release of fermentable sugars from elephant grass by enzymatic hydrolysis in the presence of surfactants

    International Nuclear Information System (INIS)

    Menegol, Daiane; Scholl, Angélica Luisi; Fontana, Roselei Claudete; Dillon, Aldo José Pinheiro; Camassola, Marli

    2014-01-01

    Highlights: • Milling is an attractive method to enhance the enzymatic hydrolysis of biomass. • Surfactants improve the efficiency of lignocellulose enzymatic hydrolysis. • Pretreatment with NaOH, smaller particle size and Tween 80® were more efficient. - Abstract: In the search for renewable energy sources, elephant grass is an alternative substrate for ethanol production, but this substrate must be hydrolyzed by cellulases and xylanases to liberate fermentable sugars. During enzymatic hydrolysis, cellulase activity is reduced by the irreversible adsorption of cellulase onto cellulose, decreasing the rate of hydrolysis. Adding surfactants during hydrolysis can improve the process. The effects of Tween® and Triton® surfactants on the enzymatic hydrolysis of elephant grass were evaluated in this context. The data indicate that pretreatment with sodium hydroxide, along with a smaller particle size (0.075–0.152 mm) and the use of Tween 80®, increased the efficiency of releasing reducing sugars from pretreated elephant grass biomass. Thus, it is possible to reduce grinding costs in second-generation ethanol production through the use of surfactants, as they allow efficient hydrolysis of larger biomass particles

  16. Selectivity of Beauveria bassiana and Metarrhizium anisopliae to Trichogramma pretiosum Riley (Hymenoptera: Trichogrammatidae)

    International Nuclear Information System (INIS)

    Potrich, Michele; Silva, Everton L. da; Neves, Pedro M.O.J.; Alves, Luis F.A.; Daros, Alaxsandra; Haas, Jucelaine; Pietrowski, Vanda

    2009-01-01

    Trichogramma pretiosum Riley and the entomopathogenic fungi Beauveria bassiana and Metarhizium anisopliae are efficient biological control agents and are thought to be used jointly. In here, we investigated if these entomopathogens could have any side-effects on T. pretiosum. Therefore, 1 x 8 cards containing sterilized eggs of Anagasta kuehniella (Zeller) that were sprayed with 0.2 ml of B. bassiana or M. anisopliae (1.0 X 10 9 conidia/ml) were offered to a T. pretiosum female for 24h (30 cards/fungus = 30 replicates). Afterwards, females were isolated in glass tubes. The control group was sprayed with sterile distillated water + Tween 80 (0.01%). In addition, 60 cards with sterilized eggs of A. kuehniella were submitted to parasitism by females of T. pretiosum for 24h. Of these cards, 30 were sprayed with B. bassiana or M. anisopliae and 30 with distillated water + Tween 80 (0.01%), and observed daily until parasitoid emergence. Metarhizium anisopliae decreased parasitoid emergence and caused confirmed mortality. Therefore, field and semi-field experiments should be conducted for a final assessment of the side-effects of these entomopathogens on Trichogramma as a ways to develop a control strategy in which both can be used. (author)

  17. Effect of surfactants and temperature on germination and vegetative growth of Beauveria bassiana

    Directory of Open Access Journals (Sweden)

    Lizzy A. Mwamburi

    2015-03-01

    Full Text Available Three non-ionic surfactants: Tween20, Tween80 and Breakthru® were screened for their effects on spore germination and mycelial growth rates and for their influence on three isolates of Beauveria bassianaspore germination at various temperatures. Tween20 and Tween80 were compatible with all the B. bassiana isolates in the germination studies, but inhibited germination at higher surfactant concentrations, irrespective of the conidial concentrations. Breakthru® had an inhibitory effect on germination even at the lowest concentration of 0.1% on all the B. bassiana isolates. The effects of the surfactants on spore germination did not correspond with their effects on colony growth. Conidial viability within the same formulation declined significantly with increases in temperature, irrespective of the surfactant. The optimal temperature for conidial germination of B. bassiana isolates was approximately 25 °C with an upper limit at 30 °C. Isolate 7320 was identified as the least affected by the different surfactants. This isolate was able to germinate rapidly in a broad temperature range of 25–30 °C after 24 h, this characteristic being an essential factor in controlling house fly populations in poultry houses.

  18. In vitro susceptibility of the pea leafminer liriomyza huidobrensis pupae to entomopathogenic heterorhabditis indica and beauveria

    International Nuclear Information System (INIS)

    Noujeim, E.; Sakr, J.; El Sayegh, D.; Nemer, N.

    2015-01-01

    Given the substantial economic losses associated with various aspects of Liriomyza huidobrensis Blanchard feeding on different crops in Lebanon as well as the ability of this pest to rapidly develop resistance to insecticides, the current study attempted to use biological control agents in vitro to manage this pest. For this reason,sensibility of L. huido brensis pupae was tested against indigeneous entomopathogenic nematode (Heterorhabditis indica) and fungus(Beauveria bassiana). Entomopathogenic nematode solution at 1000IJs per mL was placed in contact with Liriomyza pupae on one hand and pupae of L. huido brensis in direct contact with B. bassianaat the rate of 5000, 500, 50 and 5spores/pupa on the other hand. Results showed a mortality of 53±1.5% for the Liriomyza pupae following the application of entomopathogenic nematodes characterized by a red color and bioluminescence without any emergence of infective juvenile nematodes, one month following the infestation. Treatments with B. bassiana were able to kill 73-97% of the pupae and similarly treatments with B. bassiana and the surfactant Tween 80 were able to kill 73-93% of the pupae. Tween 80 demonstrated to increase the sporulation rate during the first 7 days following the application of the spores of B. bassiana. (author)

  19. Laboratory evaluation of a native strain of Beauveria bassiana for controlling Dermanyssus gallinae (De Geer, 1778) (Acari: Dermanyssidae).

    Science.gov (United States)

    Immediato, Davide; Camarda, Antonio; Iatta, Roberta; Puttilli, Maria Rita; Ramos, Rafael Antonio Nascimento; Di Paola, Giancarlo; Giangaspero, Annunziata; Otranto, Domenico; Cafarchia, Claudia

    2015-09-15

    The poultry red mite, Dermanyssus gallinae (De Geer, 1778) (Acari: Dermanyssidae) is one of the most economically important ectoparasites of laying hens worldwide. Chemical control of this mite may result in environmental and food contamination, as well as the development of drug resistance. High virulence of Beauveria bassiana sensu lato strains isolated from naturally infected hosts or from their environment has been demonstrated toward many arthropod species, including ticks. However, a limited number of studies have assessed the use of B. bassiana for the control of D. gallinae s.l. and none of them have employed native strains. This study reports the pathogenicity of a native strain of B. bassiana (CD1123) against nymphs and adults of D. gallinae. Batches of nymph and adult mites (i.e., n=720 for each stage) for treated groups (TGs) were placed on paper soaked with a 0.1% tween 80 suspension of B. bassiana (CIS, 10(5), 10(7) and 10(9) conidia/ml), whilst 240 untreated control mites for each stage (CG) were exposed only to 0.1% tween 80. The mites in TG showed a higher mortality at all stages (pbassiana suspension containing 10(9) conidia/ml was highly virulent towards nymph and adult stages of D. gallinae, therefore representing a possible promising natural product to be used in alternative or in combination to other acaricidal compounds currently used for controlling the red mite. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. Effects of Beauveria bassiana on predation and behavior of the predatory mite Phytoseiulus persimilis.

    Science.gov (United States)

    Wu, Shengyong; Xing, Zhenlong; Sun, Weinan; Xu, Xuenong; Meng, Ruixia; Lei, Zhongren

    2018-03-01

    Determination of intraguild interactions between entomopathogens and predators is important when attempting to use a combination of these two natural enemy groups for biological control of their shared arthropod pest species. This study assessed the effects of Beauveria bassiana on the predation and associated behavior of the predatory mite, Phytoseiulus persimilis, against Tetranychus urticae. The functional response tests showed that P. persimilis exhibited a Holling type II response on the spider mite, Tetranychus urticae, when treated with either a B. bassiana or Tween-80 suspension. There were no significant differences between the treatments in the number of T. urticae consumed. The laboratory choice test indicated that P. persimilis displayed a significant avoidance response to B. bassiana on bean leaves immediately following spray application. They also spent significantly longer time in self-grooming behavior on leaf disks sprayed with fungal conidia than on discs treated with Tween-80. There were no significant differences in the predation rates on T. urticae eggs between the different treatments. The potted plant investigations indicated that P. persimilis showed significant aversion behavior to the initial fungal spray, but gradually dispersed over the entire bean plants. Observations using scanning electron microscopy revealed that fungal conidia were attached to the body of P. persimilis after mounting the leaf disk treated with B. bassiana, which would account for its varied behavioral responses. Our study suggests that fungal spray did not affect the predation capability of P. persimilis and poses a negligible risk to their behavior. Copyright © 2018 Elsevier Inc. All rights reserved.

  1. Effect of surfactants and temperature on germination and vegetative growth of Beauveria bassiana.

    Science.gov (United States)

    Mwamburi, Lizzy A; Laing, Mark D; Miller, Ray M

    2015-03-01

    Three non-ionic surfactants: Tween20, Tween80 and Breakthru (®) were screened for their effects on spore germination and mycelial growth rates and for their influence on three isolates of Beauveria bassiana spore germination at various temperatures. Tween20 and Tween80 were compatible with all the B. bassiana isolates in the germination studies, but inhibited germination at higher surfactant concentrations, irrespective of the conidial concentrations . Breakthru (®) had an inhibitory effect on germination even at the lowest concentration of 0.1% on all the B. bassiana isolates. The effects of the surfactants on spore germination did not correspond with their effects on colony growth. Conidial viability within the same formulation declined significantly with increases in temperature, irrespective of the surfactant. The optimal temperature for conidial germination of B. bassiana isolates was approximately 25 °C with an upper limit at 30 °C. Isolate 7320 was identified as the least affected by the different surfactants. This isolate was able to germinate rapidly in a broad temperature range of 25-30 °C after 24 h, this characteristic being an essential factor in controlling house fly populations in poultry houses.

  2. The Influence of Emulgator on Stability of Emulsion H3PO4 in Topo-Kerosene and Efficiency at Emulsion Membrane Extraction of La and Nd Concentrate Product of Monazite Sand Treatment

    International Nuclear Information System (INIS)

    Purwani, MV.; Bintarti, AN.; Subagiono, R.

    2002-01-01

    The making of La and Nd concentrate from monazite sand have been done. The separation of La and Nd by emulsion 1M H 3 PO 4 in 5 % TOPO-Kerosene membrane extraction. The feed or aqueous phase was La and Nd concentrate in 1M HNO 3 . Emulgator Span-80 and Tween-80 were used to stabilize emulsion membrane. The influence parameters were percentage of Span-80 and ratio of Span-80 and Tween-80. After formation of emulsion membrane, the extraction process was carried out. Ratio of volume of feed : volume membrane phase = 1 : 1, ratio of volume of 5% TOPO - Kerosene : ratio of volume of 1M H 3 PO 4 1 : 1. The best yield were obtained time of emulsification was 10 minutes with the speed of emulsion was 6000 rpm and concentration of span-80 was 5%. At this condition was obtained the extraction efficiency of La was 55.55%, the extraction efficiency of Nd was 41.6% the stripping efficiency of La was 35.05%, the stripping efficiency of Nd was 87.32 %, the total efficiency of La was 19.46%, the total efficiency of Nd was 36.30% and Separation factor of Nd and La = 1.87. (author)

  3. Determination of piroxicam in pharmaceutical formulations and urine samples using europium-sensitized luminescence

    Energy Technology Data Exchange (ETDEWEB)

    Al-Kindy, Salma M.Z. [Department of Chemistry, College of Science, P.O. Box 36, Al-Khod 123, Sultan Qaboos University (Oman)], E-mail: alkindy@squ.edu.om; Suliman, Fakhr Eldin O.; Al-Wishahi, Aisha A.; Al-Lawati, Haidar A.J.; Aoudia, Muhammed [Department of Chemistry, College of Science, P.O. Box 36, Al-Khod 123, Sultan Qaboos University (Oman)

    2007-12-15

    A simple, selective and sensitive luminescence method for the assay of piroxicam (PX) in aqueous solution is developed. The method is based on the luminescence sensitization of europium (Eu{sup 3+}) by formation of ternary complex with PX in the presence of TOPO and Tween-80 as surfactant. The signal for Eu-PX-TOPO is monitored at {lambda}{sub ex}=359 nm and {lambda}{sub em}=615 nm. Optimum conditions for the formation of the complex in sequential injection analysis (SIA) were 0.01 M Tris buffer, pH 7.5, TOPO 5.0x10{sup -5} M, Tween-80 0.15% and 1.5 mM of Eu{sup 3+}, which allows the determination of 100-1000 ppb of PX with limit of detection (LOD) of 29 ppb. The relative standard deviations of the method range between 0.5% and 3.9% indicating excellent reproducibility of the method. The proposed method was successfully applied for the assay of PX in pharmaceutical formulations and in urine samples. Average recoveries of 100.8{+-}1.7% was obtained in tablet, whereas a recovery of 97.5{+-}2.0% was obtained for the total PX (PX+hydoxy-PX) in urine sample.

  4. Induction of fungal laccase production under solid state bioprocessing of new agroindustrial waste and its application on dye decolorization.

    Science.gov (United States)

    Akpinar, Merve; Ozturk Urek, Raziye

    2017-06-01

    Lignocellulosic wastes are generally produced in huge amounts worldwide. Peach waste of these obtained from fruit juice industry was utilized as the substrate for laccase production by Pleurotus eryngii under solid state bioprocessing (SSB). Its chemical composition was determined and this bioprocess was carried out under stationary conditions at 28 °C. The effects of different compounds; copper, iron, Tween 80, ammonium nitrate and manganese, and their variable concentrations on laccase production were investigated in detail. The optimum production of laccase (43,761.33 ± 3845 U L -1 ) was achieved on the day of 20 by employing peach waste of 5.0 g and 70 µM Cu 2+ , 18 µM Fe 2+ , 0.025% (v/v) Tween 80, 4.0 g L -1 ammonium nitrate, 750 µM Mn 2+ as the inducers. The dye decolorization also researched to determine the degrading capability of laccase produced from peach culture under the above-mentioned conditions. Within this scope of the study, methyl orange, tartrazine, reactive red 2 and reactive black dyes were treated with this enzyme. The highest decolorization was performed with methyl orange as 43 ± 2.8% after 5 min of treatment when compared to other dyes. Up to now, this is the first report on the induction of laccase production by P. eryngii under SSB using peach waste as the substrate.

  5. Design of Agglomerated Crystals of Ibuprofen During Crystallization: Influence of Surfactant

    Directory of Open Access Journals (Sweden)

    Maryam Maghsoodi

    2011-01-01

    Full Text Available Objective(sIbuprofen is a problematic drug in tableting, and dissolution due to its poor solubility, hydrophobicity, and tendency to stick to surface. Because of the bad compaction behavior ibuprofen has to be granulated usually before tableting. However, it would be more satisfactory to obtain directly during the crystallization step crystalline particles that can be directly compressed and quickly dissolved. Materials and Methods Crystallization of ibuprofen was carried out using the quasi emulsion solvent diffusion method in presence of surfactant (sodium lauryl sulfate (SLS, Tween 80. The particles were characterized by differential scanning calorimetry (DSC, powder X-ray diffraction (XRPD and were evaluated for particle size, flowability, drug release and tableting behavior. ResultsIbuprofen particles obtained in the presence of surfactants consisted of numerous plate- shaped crystals which had agglomerated together as near spherical shape. The obtained agglomerates exhibited significantly improved micromeritic properties as well as tableting behavior than untreated drug crystals. The agglomerates size and size distribution was largely controlled by surfactant concentration, but there was no significant influence found on the tableting properties. The dissolution tests showed that the agglomerates obtained in presence of SLS exhibited enhanced dissolution rate while the agglomerates made in the presence of Tween 80 had no significant impact on dissolution rate of ibuprofen in comparison to untreated sample. The XRPD and DSC results showed that during the agglomeration process, ibuprofen did not undergo any polymorphic changes.Conclusion The study highlights the influence of surfactants on crystallization process leading to modified performance.

  6. Comparison on Promotion Effect of Various Types of Surfactants on HCFC-141b Hydrate Induction Time

    Science.gov (United States)

    Li, Juan; Sun, Zhigao; Liu, Chenggang; Zhu, Minggui

    2018-03-01

    Cold storage in air conditioning based on refrigerant hydrate is a new-type energy saving technology to reduce initial investment and running cost of air conditioning equipments and improve system stability. Refrigerant hydrate is generated under critical temperature and pressure condition, while surfactant is an effective medium to promote its phase equilibrium. In this paper, in order to research such promotion effect, different type of surfactants with unique mechanism, SDS, Tween80 and Span80, n-BA were selected to compare the respective impact on HCFC141b hydrate induction time based on temperature curve. Experimental results showed that no obvious change had been discovered when no surfactant was added into pure water system, which coincided with phase equilibrium diagram of HCFC141b. All the four kinds of surfactants had realized promotion effect to various degrees. For each hydration system, a large gap existed between the longest and the shortest induction time in 6 groups of parallel experiments, meaning relatively poor system stability. Under the combined effect of Tween80 (2wt%), Span80 (0.1wt%) and n-BA (0.1wt%), average and the shortest induction time was 20.9min and 17.5min respectively, corresponding to the best promotion effect.

  7. Effect of hydrogen bond formation/replacement on solubility characteristics, gastric permeation and pharmacokinetics of curcumin by application of powder solution technology

    Directory of Open Access Journals (Sweden)

    Vijay Sharma

    2016-10-01

    Full Text Available The present research aimed to improve the dissolution rate and bioavailability of curcumin using the potential of liquisolid technology. Twelve drug-loaded liquisolid systems (LS-1 to LS-12 were prepared using different vehicles (PEG 200, PEG 400 and Tween 80 and curcumin concentrations in vehicle (40%, 50%, 60% and 70%, w/w. The carrier [microcrystalline cellulose (MCC PH102] to coat (Aerosil® ratio was 20 in all formulations. The systems were screened for pre-compression properties before being compressed to liquisolid tablets (LT-1 to LT-12. Post compression tests and in vitro dissolution of LTs were conducted and the results compared with those obtained for a directly compressed tablet (DCT made of curcumin, MCC PH102 and Aerosil®. LTs exhibited higher cumulative drug release (CDR than the DCT and the optimum formulation, LT-9 (made using Tween 80, was studied by powder XRD, DSC, SEM and FTIR. Ex-vivo permeation of curcumin from LT-9 through goat gastrointestinal mucosa was significantly (P<0.05 enhanced and its oral bioavailability was increased 18.6-fold in New Zealand rabbits. In vitro cytotoxicity (IC50 of LT-9 towards NCL 87 cancer cells was 40.2 µmol/L substantiating its anticancer efficacy. Accelerated stability studies revealed insignificant effects of temperature and humidity on LT-9. In summary, solubility enhancement of curcumin in LTs produced significant improvements in its permeation and bioavailability.

  8. Eucalyptus oil nanoemulsion-impregnated chitosan film: antibacterial effects against a clinical pathogen, Staphylococcus aureus, in vitro

    Directory of Open Access Journals (Sweden)

    Sugumar S

    2015-10-01

    Full Text Available Saranya Sugumar, Amitava Mukherjee, Natarajan Chandrasekaran Centre for Nanobiotechnology, VIT University, Vellore, India Abstract: Eucalyptus oil (Eucalyptus globulus nanoemulsion was formulated using low- and high-energy emulsification methods. Development of nanoemulsion was optimized for system parameters such as emulsifier type, emulsifier concentration, and emulsification methods to obtain a lower droplet size with greater stability. The minimized droplet diameter was achieved using the high-energy method of ultrasonication. Tween 80 was more effective in reducing droplet size and emulsion appearance when compared to Tween 20. Stable nanoemulsion was formulated with Tween 80 as a surfactant, and the particle size was found to be 9.4 nm (1:2 v/v. The eucalyptus oil nanoemulsion was impregnated into chitosan (1% as a biopolymer in varying concentrations. Further, the film was characterized by moisture content, microscopic study, X-ray diffraction, and Fourier transform infrared spectroscopy. Also, the film with and without nanoemulsion was evaluated against Staphylococcus aureus. The nanoemulsion-impregnated chitosan film showed higher antibacterial activity than chitosan film. These results support the inclusion of nanoemulsion-impregnated chitosan film in wound management studies. Keywords: essential oil, emulsion, biopolymer, impregnation, thin film, wound isolate

  9. Determination of piroxicam in pharmaceutical formulations and urine samples using europium-sensitized luminescence

    International Nuclear Information System (INIS)

    Al-Kindy, Salma M.Z.; Suliman, Fakhr Eldin O.; Al-Wishahi, Aisha A.; Al-Lawati, Haidar A.J.; Aoudia, Muhammed

    2007-01-01

    A simple, selective and sensitive luminescence method for the assay of piroxicam (PX) in aqueous solution is developed. The method is based on the luminescence sensitization of europium (Eu 3+ ) by formation of ternary complex with PX in the presence of TOPO and Tween-80 as surfactant. The signal for Eu-PX-TOPO is monitored at λ ex =359 nm and λ em =615 nm. Optimum conditions for the formation of the complex in sequential injection analysis (SIA) were 0.01 M Tris buffer, pH 7.5, TOPO 5.0x10 -5 M, Tween-80 0.15% and 1.5 mM of Eu 3+ , which allows the determination of 100-1000 ppb of PX with limit of detection (LOD) of 29 ppb. The relative standard deviations of the method range between 0.5% and 3.9% indicating excellent reproducibility of the method. The proposed method was successfully applied for the assay of PX in pharmaceutical formulations and in urine samples. Average recoveries of 100.8±1.7% was obtained in tablet, whereas a recovery of 97.5±2.0% was obtained for the total PX (PX+hydoxy-PX) in urine sample

  10. Mixed reverse micelles facilitated downstream processing of lipase involving water-oil-water liquid emulsion membrane.

    Science.gov (United States)

    Bhowal, Saibal; Priyanka, B S; Rastogi, Navin K

    2014-01-01

    Our earlier work for the first time demonstrated that liquid emulsion membrane (LEM) containing reverse micelles could be successfully used for the downstream processing of lipase from Aspergillus niger. In the present work, we have attempted to increase the extraction and purification fold of lipase by using mixed reverse micelles (MRM) consisting of cationic and nonionic surfactants in LEM. It was basically prepared by addition of the internal aqueous phase solution to the organic phase followed by the redispersion of the emulsion in the feed phase containing enzyme, which resulted in globules of water-oil-water (WOW) emulsion for the extraction of lipase. The optimum conditions for maximum lipase recovery (100%) and purification fold (17.0-fold) were CTAB concentration 0.075 M, Tween 80 concentration 0.012 M, at stirring speed of 500 rpm, contact time 15 min, internal aqueous phase pH 7, feed pH 9, KCl concentration 1 M, NaCl concentration 0.1 M, and ratio of membrane emulsion to feed volume 1:1. Incorporation of the nonionic surfactant (e.g., Tween 80) resulted in remarkable improvement in the purification fold (3.1-17.0) of the lipase. LEM containing a mixture of nonionic and cationic surfactants can be successfully used for the enhancement in the activity recovery and purification fold during downstream processing of enzymes/proteins. © 2014 American Institute of Chemical Engineers.

  11. Selectivity of Beauveria bassiana and Metarrhizium anisopliae to Trichogramma pretiosum Riley (Hymenoptera: Trichogrammatidae); Seletividade de Beauveria bassiana e Metarhizium anisopliae a Trichogramma pretiosum Riley (Hymenoptera: Trichogrammatidae)

    Energy Technology Data Exchange (ETDEWEB)

    Potrich, Michele; Silva, Everton L. da; Neves, Pedro M.O.J. [Universidade Estadual de Londrina (UEL), PR (Brazil). Centro de Ciencias Agrarias], e-mail: profmichele@gmail.com, e-mail: evertonloz@gmail.com, e-mail: pedroneves@uel.br; Alves, Luis F.A.; Daros, Alaxsandra [Universidade do Oeste do Parana (UNIOESTE), Cascavel, PR (Brazil). Centro de Ciencias Biologicas e da Saude. Lab. de Zoologia de Invertebrados], e-mail: lfaalves@unioeste.br; Haas, Jucelaine; Pietrowski, Vanda [Universidade do Oeste do Parana (UNIOESTE), Marechal Candido Rondon, PR (Brazil). Centro de Ciencias Agrarias], e-mail: jubarth@gmail.com, e-mail: vandapietrowski@gmail.com

    2009-07-01

    Trichogramma pretiosum Riley and the entomopathogenic fungi Beauveria bassiana and Metarhizium anisopliae are efficient biological control agents and are thought to be used jointly. In here, we investigated if these entomopathogens could have any side-effects on T. pretiosum. Therefore, 1 x 8 cards containing sterilized eggs of Anagasta kuehniella (Zeller) that were sprayed with 0.2 ml of B. bassiana or M. anisopliae (1.0 X 10{sup 9} conidia/ml) were offered to a T. pretiosum female for 24h (30 cards/fungus = 30 replicates). Afterwards, females were isolated in glass tubes. The control group was sprayed with sterile distillated water + Tween 80 (0.01%). In addition, 60 cards with sterilized eggs of A. kuehniella were submitted to parasitism by females of T. pretiosum for 24h. Of these cards, 30 were sprayed with B. bassiana or M. anisopliae and 30 with distillated water + Tween 80 (0.01%), and observed daily until parasitoid emergence. Metarhizium anisopliae decreased parasitoid emergence and caused confirmed mortality. Therefore, field and semi-field experiments should be conducted for a final assessment of the side-effects of these entomopathogens on Trichogramma as a ways to develop a control strategy in which both can be used. (author)

  12. [Selectivity of Beauveria bassiana and Metarhizium anisopliae to Trichogramma pretiosum Riley (Hymenoptera: Trichogrammatidae)].

    Science.gov (United States)

    Potrich, Michele; Alves, Luis F A; Haas, Jucelaine; Da Silva, Everton R L; Daros, Alaxsandra; Pietrowski, Vanda; Neves, Pedro M O J

    2009-01-01

    Trichogramma pretiosum Riley and the entomopathogenic fungi Beauveria bassiana and Metarhizium anisopliae are efficient biological control agents and are thought to be used jointly. In here, we investigated if these entomopathogens could have any side-effects on T. pretiosum. Therefore, 1 x 8 cards containing sterilized eggs of Anagasta kuehniella (Zeller) that were sprayed with 0.2 ml of B. bassiana or M. anisopliae (1.0 x 10(9) conidia/ml) were offered to a T. pretiosum female for 24h (30 cards/fungus = 30 replicates). Afterwards, females were isolated in glass tubes. The control group was sprayed with sterile distillated water + Tween 80 (0.01%). In addition, 60 cards with sterilized eggs of A. kuehniella were submitted to parasitism by females of T. pretiosum for 24h. Of these cards, 30 were sprayed with B. bassiana or M. anisopliae and 30 with distillated water + Tween 80 (0.01%), and observed daily until parasitoid emergence. Metarhizium anisopliae decreased parasitoid emergence and caused confirmed mortality. Therefore, field and semi-field experiments should be conducted for a final assessment of the side-effects of these entomopathogens on Trichogramma as a ways to develop a control strategy in which both can be used.

  13. Chemical labeling studies on isolated and vesicular bovine heart mitochondrial cytochrome c oxidase

    International Nuclear Information System (INIS)

    Venzke, K.S.; Reynolds, K.A.; Prochaska, L.J.

    1987-01-01

    Bovine heart cytochrome c oxidase dispersed in Triton X-100, Tween 80, or dodecyl maltoside was reacted with the water-soluble reagents [ 35 S]-diazonium benzene sulfonate (DABS) (10-100 μM) or [ 125 I]-iodo-DABS (34-55 nM) to map the surface topography of the enzyme in different protein aggregation states. Both reagents gave similar labeling profiles of the enzyme under all conditions. Subunits II, III, and VII were extensively labeled by DABS, while subunits I and VI were unreactive with DABS in each detergent. Subunit V exhibited an increase in DABS labeling when the enzyme was reacted in Tween 80 as compared to the enzyme in Triton X-100 or dodecyl maltoside. Also, components b and c showed an increase in DABS reactivity when the enzyme was modified in dodecyl maltoside. In general, the labeling profile of the enzyme in dodecyl maltoside resembled that of the enzyme in Triton X-100, emphasizing that the mechanism of dispersal of the enzyme by both detergents is similar. Cytochrome c oxidase incorporated into phosphatidylglycerol:phosphatidylcholine(1:20)(w:w) phospholipid vesicles (COV) by cholate dialysis was reacted with DABS and subunits II and III were significantly labeled. Approximately 65-70% of the enzyme in COV was oriented with the cytochrome c binding domain facing the extravesicular medium, as determined by comparison of the DABS labeling in subunit IV in detergent-lysed and intact COV

  14. Solubility of Acetaminophen in Some Alcohol Free Solvent Systems

    Directory of Open Access Journals (Sweden)

    H. Barzegar-Jalali

    1990-07-01

    Full Text Available In an attempt to formulate an alcohol free acetaminophen solution for use in pediatrics, the effect of different concentra¬tions of polyethylene glycol 400 (PEG 400 and polysorbate 80 ( Iween 80 on the solubility of the drug in water .as well as in the vehicles composed of (propylene glycol 10?o V/V + glycerol 20% V/V in water and (propylene glycol 12?o V/V + glycerol 40?o V/V in water was investigated at 20 C. There was a linear relationship between the logarithm of the drug solubility and volume fraction of PEG 400 in the vehicles. Also, a linear relation was established between the solubility of the drug in water and the volume fraction of Tween 80. After the solubilization studies, the appropriate concentration of the cosolvents and Tween 80 were chosen for the tolerance test of the solutions at a low temperature (4 C against crystalization. These studies led us to propose two alcohol free drug solutions with suitable sweetening and flavoring agents. Properties of the products including a simple method of determination of drug concentration, density and viscosity measure¬ments have been also reported.

  15. Reversal of multidrug resistance by surfactants.

    Science.gov (United States)

    Woodcock, D. M.; Linsenmeyer, M. E.; Chojnowski, G.; Kriegler, A. B.; Nink, V.; Webster, L. K.; Sawyer, W. H.

    1992-01-01

    Cremophor EL, a pharmacologically inactive solubilising agent, has been shown to reverse multidrug resistance (MDR). Using flow cytometric evaluation of equilibrium intracellular levels of daunorubicin (DNR), we found that eight other surface active agents will also reverse MDR. All the active detergents contain polyethoxylated moieties but have no similarities in their hydrophobic components. The properties of three polyethoxylated surfactants that showed the lowest toxicities, Cremophor, Tween 80 and Solutol HS15, were examined in more detail. The concentrations of Tween 80 and Solutol required to reverse DNR exclusion were 10-fold lower than for Cremophor. However while concentrations greater than or equal to 1:10(2) of the former two surfactants resulted in breakdown of cells, even 1:10 of Cremophor did not lyse cells. Studies of the effects of Cremophor on the uptake and efflux of DNR in normal and MDR cell types showed that Cremophor increases intracellular DNR primarily by locking the rapid efflux from the cells. This blockage of drug efflux may be mediated by a substantial alteration in the fluidity of cell membranes induced by Cremophor, as shown by decreased fluorescence anisotropy of a membrane probe. Consistent with these data, coinjection of adriamycin plus Cremophor into mice carrying a multidrug resistant P388 transplantable tumour significantly increased the survival time of the mice compared with adriamycin treatment alone. PMID:1637678

  16. Effect of Presence and Concentration of Plasticizers, Vegetable Oils, and Surfactants on the Properties of Sodium-Alginate-Based Edible Coatings

    Directory of Open Access Journals (Sweden)

    Tugce Senturk Parreidt

    2018-03-01

    Full Text Available Achieving high quality of a coated food product is mostly dependent on the characteristics of the food material to be coated, the properties of the components in the coating solution, and the obtained coating material. In the present study, usability and effectiveness of various components as well as their concentrations were assessed to produce an effective coating material. For this purpose, different concentrations of gelling agent (sodium alginate 0–3.5%, w/w, plasticizers (glycerol and sorbitol (0–20%, w/w, surfactants (tween 40, tween 80, span 60, span 80, lecithin (0–5%, w/w, and vegetable oils (sunflower oil, olive oil, rapeseed oil (0–5%, w/w were used to prepare edible coating solutions. Formulations were built gradually, and characteristics of coatings were evaluated by analyzing surface tension values and its polar and dispersive components, emulsion droplet size, and optical appearance in microscopic scale. The results obtained showed that 1.25% sodium alginate, 2% glycerol, 0.2% sunflower oil, 1% span 80, and 0.2% tween 40 or tween 80 can be used in formulation to obtain an effective coating for hydrophobic food surfaces. Three formulations were designed, and their stability (emulsion droplet size, optical characteristics, and creaming index and wettability tests on strawberry showed that they could be successfully used in coating applications.

  17. Control of Black Rot Disease in Tomato Fruits by Using Formulated Ginger Essential oil Treated by Gamma Radiation

    International Nuclear Information System (INIS)

    Helal, I.M.; Abdeldaiem, M.H.

    2008-01-01

    Ginger essential oil (Zingiber officinale) treated by gamma radiation at dose of 10 kGy was selected as an active ingredient for formulation of the biocide. Liquid formulations (emulsifiable concentrates) were prepared using different emulsifiers (Emulgator B.L.M. and tween 80 or tween 20) and additive oil (soybean oil). Physicochemical properties of the formulated oil (spontaneous emulsification, emulsion stability; cold stability and heat stability, viscosity, surface tension and ph) were measured. The formulated oil was tested in vivo to investigate its efficiency for controlling the growth of Alternaria alternata inoculated into tomato fruits. The results indicated that soaking inoculated tomato fruits in the formulated oil (ginger essential oil + soybean oil + emulgator B.L.M. + tween 80) treatment at concentration of 300 ppm for a period of 12 minute was the most effective for controlling the growth of the tested fungus. In addition, the formulated oil had efficiency for controlling the rot development on tomato fruits when applied as therapeutic and protective agents

  18. Screening for Extracellular Lipase Enzymes with Transesterification Capacity in Mucoromycotina Strains

    Directory of Open Access Journals (Sweden)

    Alexandra Kotogán

    2014-01-01

    Full Text Available In this study, 169 zygomycetes fungal strains including some cold-tolerant isolates were screened for their extracellular lipolytic activity towards tributyrin. Nineteen of them were outstanding in their enzyme production as they developed the largest lipolytic halo around the colonies in plate tests. Mortierella alpina, M. echinosphaera, Mucor corticolus, Rhizomucor miehei, Rhizopus oryzae, Rh. stolonifer, Umbelopsis autotrophica, U. isabellina, U. ramanniana var. angulispora and U. versiformis were selected for further studies to characterise their lipolytic enzyme production in detail. In these assays, effect of Tween 80 and palm, soybean, sunflower, olive, extra virgin olive, wheat germ, corn germ, sesame seed, pumpkin seed and cottonseed oils on the enzyme activities was investigated, and wheat bran-based submerged and solid-state fermentations were also tested. Tween 80 and olive oil proved to be efficient inductors for lipolytic enzyme production, which was also enhanced when wheat bran was used as support. Addition of mineral salts and olive oil to the solid fermentation medium resulted in at least 1.5-fold increment in the enzyme activities of the crude extracts. Organic synthesis was also assayed by the selected lipases, in which enzymes from the fungi R. miehei, Rh. stolonifer and M. echinosphaera gave the best yields during transesterification reactions between p-nitrophenyl palmitate and ethanol.

  19. Effect of Presence and Concentration of Plasticizers, Vegetable Oils, and Surfactants on the Properties of Sodium-Alginate-Based Edible Coatings

    Science.gov (United States)

    Schott, Michael; Müller, Kajetan

    2018-01-01

    Achieving high quality of a coated food product is mostly dependent on the characteristics of the food material to be coated, the properties of the components in the coating solution, and the obtained coating material. In the present study, usability and effectiveness of various components as well as their concentrations were assessed to produce an effective coating material. For this purpose, different concentrations of gelling agent (sodium alginate 0–3.5%, w/w), plasticizers (glycerol and sorbitol (0–20%, w/w), surfactants (tween 40, tween 80, span 60, span 80, lecithin (0–5%, w/w), and vegetable oils (sunflower oil, olive oil, rapeseed oil (0–5%, w/w) were used to prepare edible coating solutions. Formulations were built gradually, and characteristics of coatings were evaluated by analyzing surface tension values and its polar and dispersive components, emulsion droplet size, and optical appearance in microscopic scale. The results obtained showed that 1.25% sodium alginate, 2% glycerol, 0.2% sunflower oil, 1% span 80, and 0.2% tween 40 or tween 80 can be used in formulation to obtain an effective coating for hydrophobic food surfaces. Three formulations were designed, and their stability (emulsion droplet size, optical characteristics, and creaming index) and wettability tests on strawberry showed that they could be successfully used in coating applications. PMID:29509669

  20. Shifts in microbial community structure during in situ surfactant-enhanced bioremediation of polycyclic aromatic hydrocarbon-contaminated soil.

    Science.gov (United States)

    Wang, Lingwen; Li, Feng; Zhan, Yu; Zhu, Lizhong

    2016-07-01

    This study aims to reveal the microbial mechanism of in situ surfactant-enhanced bioremediation (SEBR). Various concentrations of rhamnolipids, Tween 80, and sodium dodecyl benzenesulfonate (SDBS) were separately sprayed onto soils contaminated with polycyclic aromatic hydrocarbons (PAHs) for years. Within 90 days, the highest level of degradation (95 %) was observed in the soil treated with rhamnolipids (10 mg/kg), followed by 92 % degradation with Tween 80 (50 mg/kg) and 90 % degradation with SDBS (50 mg/kg). The results of the microbial phospholipid fatty acids (PLFAs) suggest that bacteria dominated the enhanced PAH biodegradation (94 % of the maximum contribution). The shift of bacterial community structure during the surfactant treatment was analyzed by using the 16S rRNA gene high-throughput sequencing. In the presence of surfactants, the number of the operational taxonomic units (OTUs) associated with Bacillus, Pseudomonas, and Sphingomonas increased from 2-3 to 15-30 % at the end of the experiment (two to three times of control). Gene prediction with phylogenetic investigation of communities by reconstruction of unobserved states (PICRUSt) shows that the PAH-degrading genes, such as 1-hydroxy-2-naphthoate dioxygenase and PAH dioxygenase large subunit, significantly increased after the surfactant applications (p bioremediation.

  1. Filme ativo de acetato de celulose incorporado com nanosuspensão de curcumina

    Directory of Open Access Journals (Sweden)

    Deivis de Moraes Carvalho

    Full Text Available Resumo As embalagens ativas podem liberar substâncias para inibir a microbiota e as reações na superfície dos alimentos. Dentre essas substâncias a curcumina pode ser usada pois apresenta atividade antimicrobiana e antioxidante. A difusão de compostos ativos em filmes de acetato de celulose pode ser estendida por longos períodos a taxa controlada. Sua adição pode afetar as propriedades mecânicas e de barreira dos filmes, tornando-se necessário mensurar estas alterações. Assim, objetivou-se preparar filmes ativos de acetato de celulose e tween 80 incorporados com mistura simples de curcumina e nanosuspensão de curcumina e avaliar cor, propriedades mecânicas, permeabilidade ao CO2 e migração do componente ativo. A curcumina influenciou as características mecânicas, ópticas e não afetou a permeabilidade dos filmes. O tween 80 favoreceu a migração da curcumina e a redução do tamanho das partículas não aumentou a migração de curcumina.

  2. Solvent-Detergent Treatment of IgM-Enriched Immunoglobulin

    Directory of Open Access Journals (Sweden)

    Mojgan Pourmokhtar

    2003-08-01

    Full Text Available Viral safety of human plasma products plays a key role in their safe uses. Solvent- detergent (SD virus-inactivation method has gained widespread popularity in the manufacture of biological products. This treatment which inactivates lipid-enveloped viruses effectively consists of incubation of a plasma protein solution in the presence of a non-volatile organic solvent and a detergent. In this study, IgM-enriched immunoglobulin was incubated at 24 °C for 6 h under slow stirring in the presence of tri(n-butyl phosphate (0.3% w/w as solvent and tween 80 (1% w/w as detergent. After completion of the inactivation process and removal of the solvent-detergent, the ability of SD-treatment to remove Infectious Bovine Rhinotracheitis (IBR virus (a lipid-enveloped virus and Foot-and-Mouth Disease virus (a non-enveloped virus were evaluated by "virus spiking studies" using a scaled down process. Reduction factor of 4 log was obtained for the SD-treatment of IgM-enriched immunoglobulin spiked with IBR virus. No virus inactivation was observed in the SD-treated IgM-enriched immunoglobulin, spiked with Foot-and-Mouth Disease virus. It was concluded that treatment of IgM-enriched immunoglobulin with TNBP-TWEEN 80 may be considered as an efficient lipid-enveloped virus inactivation step in the manufacture of this product.

  3. Studies on the performance of glyphosate in the control of graminaceous weeds in rice fields

    Energy Technology Data Exchange (ETDEWEB)

    Swamy, P M [Department of Botany, Sri Venkateswara Univ., Tirupati (India)

    1998-02-01

    Absorption and translocation of {sup 14}C-labelled glyphosate was studied from the commercial formulation `Roundup` to which three different surfactants, singly or in combination, four different oil adjuvants and ammonium sulfate were added. Increased penetration of the herbicide was observed after 1, 2 and 24 h by the addition of Triton X-100, ammonium sulfate and coconut oil. Addition of Neem oil instead of coconut oil also showed increased penetration after 24 h. Addition of Tween 80 and diesel oil increased the penetration with or without ammonium sulfate; whereas, Tween 20 with the added peanut oil or coconut oil and Tween 80 with Neem oil increased penetration only in the presence of ammonium sulfate. Therefore, the absorption of glyphosate seems to be dependent on the nature of surfactant and the oil (adjuvant) used. Field tests were carried out to study the effect of hand weeding, one dose of unamended and three different doses of amended (0.5, 0.75 and 1.5 kg a.i. ha{sup -1}) `Roundup` on weed control. The herbicide was applied at 9 am and 4 pm in cropped and uncropped plots. Visual rating, after 15 days suggested better control in hand weeded plots. However, this may be due to the fact that the hand weeding, was performed later than the herbicide application. Herbicide treatment with unamended Roundup resulted in significantly better weed control than the amended Roundup plots. (author). 31 refs, 9 tabs.

  4. Studies on the performance of glyphosate in the control of graminaceous weeds in rice fields

    International Nuclear Information System (INIS)

    Swamy, P.M.

    1998-01-01

    Absorption and translocation of 14 C-labelled glyphosate was studied from the commercial formulation 'Roundup' to which three different surfactants, singly or in combination, four different oil adjuvants and ammonium sulfate were added. Increased penetration of the herbicide was observed after 1, 2 and 24 h by the addition of Triton X-100, ammonium sulfate and coconut oil. Addition of Neem oil instead of coconut oil also showed increased penetration after 24 h. Addition of Tween 80 and diesel oil increased the penetration with or without ammonium sulfate; whereas, Tween 20 with the added peanut oil or coconut oil and Tween 80 with Neem oil increased penetration only in the presence of ammonium sulfate. Therefore, the absorption of glyphosate seems to be dependent on the nature of surfactant and the oil (adjuvant) used. Field tests were carried out to study the effect of hand weeding, one dose of unamended and three different doses of amended (0.5, 0.75 and 1.5 kg a.i. ha -1 ) 'Roundup' on weed control. The herbicide was applied at 9 am and 4 pm in cropped and uncropped plots. Visual rating, after 15 days suggested better control in hand weeded plots. However, this may be due to the fact that the hand weeding, was performed later than the herbicide application. Herbicide treatment with unamended Roundup resulted in significantly better weed control than the amended Roundup plots. (author)

  5. Effects of different combinations of nanocrystallization technologies on avanafil nanoparticles: in vitro, in vivo and stability evaluation.

    Science.gov (United States)

    Soliman, Kareem AbuBakr; Ibrahim, Howida Kamal; Ghorab, Mahmoud Mohammed

    2017-01-30

    The study investigated the effects of different combined top-down and bottom-up nanocrystallization technologies on particle size and solid state of avanafil nanoparticles. Combined antisolvent precipitation-ultrasonication (sonoprecipitation) technique was adopted to prepare 18 formulas according to 3 2 .2 1 factorial design using 3 stabilizers; Tween 80, polyvinyl alcohol (PVA) and Pluronic F68 at different concentrations with different cryoprotectants. Particle size analysis of the lyophilized formulas showed that Tween 80 was an effective nanoparticles stabilizer in contrast to Pluronic F68 and PVA which failed to prevent nanoparticles flocculation when they were used at high concentration. The combined effects of nanonization and amorphism contributed to the improvement in solubility. Further processing of the sonoprecipitated formulas by high pressure homogenization (HPH) (modified NANOEDGE™ technology) resulted in further size reduction of PVA-stabilized particles, while it stimulated flocculation of Tween-stabilized nanoparticles. Nevertheless, all of the homogenized formulas partially retrieved their crystallinity which reduced their solubility. Non-homogenized formula 2E composed of 1:2 (avanafil: Tween) with glucose as cryoprotectant, exhibited 13.68- and 2.59-fold improvement in solubility and in vitro dissolution, respectively. This formula had oral bioavailability of 137.02% relative to Spedra ® tablets and it maintained its nanosize, amorphism and dissolution behavior over 6 months of storage under stress conditions. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. Modeling and analysis of film composition on mechanical properties of maize starch based edible films.

    Science.gov (United States)

    Prakash Maran, J; Sivakumar, V; Thirugnanasambandham, K; Kandasamy, S

    2013-11-01

    The present study investigates the influence of composition (content of maize starch (1-3 g), sorbitol (0.5-1.0 ml), agar (0.5-1.0 g) and tween-80 (0.1-0.5 ml)) on the mechanical properties (tensile strength, elongation, Young's modulus, puncture force and puncture deformation) of the maize starch based edible films using four factors with three level Box-Behnken design. The edible films were obtained by casting method. The results showed that, tween-80 increases the permeation of sorbitol in to the polymer matrix. Increasing concentration of sorbitol (hydrophilic nature and plasticizing effect of sorbitol) decreases the tensile strength, Young's modulus and puncture force of the films. The results were analyzed by Pareto analysis of variance (ANOVA) and second order polynomial models were obtained for all responses with high R(2) values (R(2)>0.95). 3D response surface plots were constructed to study the relationship between process variables and the responses. Copyright © 2013 Elsevier B.V. All rights reserved.

  7. Enhancement of encapsulation efficiency of nanoemulsion-containing aripiprazole for the treatment of schizophrenia using mixture experimental design.

    Science.gov (United States)

    Masoumi, Hamid Reza Fard; Basri, Mahiran; Samiun, Wan Sarah; Izadiyan, Zahra; Lim, Chaw Jiang

    2015-01-01

    Aripiprazole is considered as a third-generation antipsychotic drug with excellent therapeutic efficacy in controlling schizophrenia symptoms and was the first atypical anti-psychotic agent to be approved by the US Food and Drug Administration. Formulation of nanoemulsion-containing aripiprazole was carried out using high shear and high pressure homogenizers. Mixture experimental design was selected to optimize the composition of nanoemulsion. A very small droplet size of emulsion can provide an effective encapsulation for delivery system in the body. The effects of palm kernel oil ester (3-6 wt%), lecithin (2-3 wt%), Tween 80 (0.5-1 wt%), glycerol (1.5-3 wt%), and water (87-93 wt%) on the droplet size of aripiprazole nanoemulsions were investigated. The mathematical model showed that the optimum formulation for preparation of aripiprazole nanoemulsion having the desirable criteria was 3.00% of palm kernel oil ester, 2.00% of lecithin, 1.00% of Tween 80, 2.25% of glycerol, and 91.75% of water. Under optimum formulation, the corresponding predicted response value for droplet size was 64.24 nm, which showed an excellent agreement with the actual value (62.23 nm) with residual standard error <3.2%.

  8. Applications of Circular Dichroism for Structural Analysis of Gelatin and Antimicrobial Peptides

    Directory of Open Access Journals (Sweden)

    Yoonkyung Park

    2012-03-01

    Full Text Available Circular dichroism (CD is a useful technique for monitoring changes in the conformation of antimicrobial peptides or gelatin. In this study, interactions between cationic peptides and gelatin were observed without affecting the triple helical content of the gelatin, which was more strongly affected by anionic surfactant. The peptides did not adopt a secondary structure in the presence of aqueous solution or Tween 80, but a peptide secondary structure formed upon the addition of sodium dodecyl sulfate (SDS. The peptides bound to the phosphate group of lipopolysaccharide (LPS and displayed an alpha-helical conformation while (KW4 adopted a folded conformation. Further, the peptides did not specifically interact with the fungal cell wall components of mannan or laminarin. Tryptophan blue shift assay indicated that these peptides interacted with SDS, LPS, and gelatin but not with Tween 80, mannan, or laminarin. The peptides also displayed antibacterial activity against P. aeruginosa without cytotoxicity against HaCaT cells at MIC, except for HPA3NT3-analog peptide. In this study, we used a CD spectroscopic method to demonstrate the feasibility of peptide characterization in numerous environments. The CD method can thus be used as a screening method of gelatin-peptide interactions for use in wound healing applications.

  9. Chemical-assisted phytoremediation of CD-PAHs contaminated soils using Solanum nigrum L.

    Science.gov (United States)

    Yang, Chuanjie; Zhou, Qixing; Wei, Shuhe; Hu, Yahu; Bao, Yanyu

    2011-09-01

    A well-characterized cadmium (Cd) hyperaccumulating plant Solanum nigrum was grown in Cd and polycyclic aromatic hydrocarbons (PAHs) co-contaminated soil that was repeatedly amended with chemicals, including EDTA, cysteine (CY), salicylic acid (Sa), and Tween 80 (TW80), to test individual and combined treatment effects on phytoremediation of Cd-PAHs contaminated soils. Plant growth was negatively affected by exogenous chemicals except for EDTA. S. nigrum could accumulate Cd in tissues without assistant chemicals, while there was no visible effect on the degradation of PAHs. Cysteine had significant effects on phytoextraction of Cd and the highest metal extraction ratio (1.27%) was observed in 0.9 mmol/kg CY treatment. Both salicylic acid and Tween 80 had stimulative effects on the degradation of PAHs and there was the maximal degradation rate (52.6%) of total PAHs while 0.9 mmol/kg Sa was applied. Furthermore, the combined treatment T(0.1EDTA+0.9CY+0.5TW80) and T(0.5EDTA+0.9CY+03Sa) could not only increase the accumulation of Cd in plant tissues, but also promote the degradation of PAHs. These results indicated that S. nigrum might be effective in phytoextracting Cd and enhancing the biodegradation of PAHs in the co-contaminated soils with assistant chemicals.

  10. Sorption of streptococcus faecium to glass

    International Nuclear Information System (INIS)

    Oerstavik, D.

    1977-01-01

    A method has been developed by which to study the sorption of Streptococcus faecium to soda-lime cover glasses. Conditions were chosen to minimize the influence on sorption of bacterial polymer production, passive sorption being studied rather than attachment mediated by metabolic activities. Sorption of S. faecium increased with increasing temperature (to 50degC), time, and cell concentration, but equilibrium apparently was not reached even after incubation for 8 hours or at a cell concentration of 3 x 10 10 per ml. Sorption increased with solute molarity up to 0.1 M concentration of NaCl and KCl, indicating an effect of the electrical double layers on the apposition of cells to the glass surface. Desorption of bacteria could be obtained after multiple washings of the glasses in buffer or by the action of Tween 80, but not if sorbed bacteria were left in distilled water, various salt solutions, urea, or in suspensions of unlabelled bacteria. It was concluded that sorption occurred as a result of chemical interactions between the glass and the cell surface. Tween 80 at a concentration of 1 per cent inhibited sorption to 26 per cent of buffer controls, 2 M urea was less effective, and 1 M NaCl was without effect. It is suggested that hydrophobic interactions may be of importance in the binding of S. faecium to glass. (author)

  11. 21 CFR 175.320 - Resinous and polymeric coatings for polyolefin films.

    Science.gov (United States)

    2010-04-01

    ... lauryl sulfate Sorbitan and sorbitol esters of fatty acids from vegetable or animal oils Spermaceti wax... only as a polymerization inhibitor in 2-sulfoethyl methacrylate, sodium salt. 2-Ethylhexyl acrylate... scale as measured in 50 percent mineral spirits solution 2-Sulfoethyl methacrylate, sodium salt Chemical...

  12. Method of forming a dianhydrosugar alcohol

    Science.gov (United States)

    Holladay, Johnathan E [Kennewick, WA; Hu, Jianli [Kennewick, WA; Wang, Yong [Richland, WA; Werpy, Todd A [West Richland, WA; Zhang, Xinjie [Burlington, MA

    2010-01-19

    The invention includes methods of producing dianhydrosugars. A polyol is reacted in the presence of a first catalyst to form a monocyclic sugar. The monocyclic sugar is transferred to a second reactor where it is converted to a dianhydrosugar alcohol in the presence of a second catalyst. The invention includes a process of forming isosorbide. An initial reaction is conducted at a first temperature in the presence of a solid acid catalyst. The initial reaction involves reacting sorbitol to produce 1,4-sorbitan, 3,6-sorbitan, 2,5-mannitan and 2,5-iditan. Utilizing a second temperature, the 1,4-sorbitan and 3,6-sorbitan are converted to isosorbide. The invention includes a method of purifying isosorbide from a mixture containing isosorbide and at least one additional component. A first distillation removes a first portion of the isosorbide from the mixture. A second distillation is then conducted at a higher temperature to remove a second portion of isosorbide from the mixture.

  13. Impact of non-ionic surfactant chemical structure on morphology and stability of polystyrene nanocomposite latex

    CSIR Research Space (South Africa)

    Greesh, N

    2016-01-01

    Full Text Available Polystyrene (PS) colloid particles in presence of non-ionic surfactant-modified clay particles were prepared by the free-radical polymerization of styrene monomers in emulsion. Three different types of non-ionic surfactants, sorbitan monopalmitate...

  14. Larvicidal efficacy of essential oil of betel leaf ( Piper betle on the larvae of the old World screwworm fly, Chrysomya bezziana in vitro

    Directory of Open Access Journals (Sweden)

    Wardhana April

    2007-01-01

    Full Text Available Larvae of Chrysomya bezziana are the commonest cause of wound myiasis in some parts of the world. This obligatory parasite is important in humans and in commercial livestock. Kumarasinghe et al have reported that essential oil of betel leaf (EOBL is larvicidal to C. megacephala but there are no publications on its effect on C. bezziana . This study was done to evaluate the efficacy of essential oil of betel leaf ( Piper betle against the larvae of C. bezziana in vitro . EOBL was prepared at the Industrial Technology Institute Colombo, Sri Lanka, according to a standard protocol. The experiment on larvae was carried out at the Research Institute for Veterinary Sciences in Bogor, Indonesia. EOBL concentrations of 2%, 3% and 4% were prepared with Tween 80. Two ml of 4%, 3% and 2% EOBL in 1% Tween 80 (v/v/aq were poured into separate Petri dishes. Ten 1st and 2nd instar larvae were placed in each Petri dish. Asuntol (Chaumaphos 1% was used as positive control and distilled water with 1% tween 80 was the negative control. Larval mortality was assessed half-hourly. The experiment was repeated five times and averages were compared. Sustained immobility of the larvae, after exposure to the relevant substances was considered as death. The efficacy of EOBL depended on, the stages of C. bezziana larvae and the concentration. With 4% EOBL, all first instar larvae were killed within two hours and the second instar larvae were killed by four hours. The positive control showed no mortality until four hours but all larvae were weak, from the first 30 minutes. In the negative control, larvae were mobile and active. EOBL 3% killed all the first instar larvae by 150 minutes and 74% of the second instar at four hours. By 210 minutes, 2% preparation had killed 100% of the first instars. EOBL is an effective larvicidal for C. bezziana first and second instar larvae in vitro . This natural product has a great potential to be developed as a novel larvicide against this

  15. In vivo modulation of foreign body response on polyurethane by surface entrapment technique.

    Science.gov (United States)

    Khandwekar, Anand P; Patil, Deepak P; Hardikar, Anand A; Shouche, Yogesh S; Doble, Mukesh

    2010-11-01

    Implanted polymeric materials, such as medical devices, provoke the body to initiate an inflammatory reaction, known as the foreign body response (FBR), which causes several complications. In this study, polyurethane (Tecoflex®, PU) surface modified with the nonionic surfactant Tween80® (PU/T80) and the cell adhesive PLL-RGD peptide (PU/PLL-RGD) by a previously described entrapment technique were implanted in the peritoneal cavity of Wistar rats for 30 days. Implants were retrieved and examined for tissue reactivity and cellular adherence by various microscopic and analytical techniques. Surface-induced inflammatory response was assessed by real-time PCR based quantification of proinflammatory cytokine transcripts, namely, TNF-α and IL-1β, normalized to housekeeping gene GAPDH. Cellular adherence and their distribution profile were assessed by microscopic examination of H&E stained implant sections. It was observed that PU/PLL-RGD followed by the bare PU surface exhibited severe inflammatory and fibrotic response with an average mean thickness of 19 and 12 μm, respectively, in 30 days. In contrast, PU/T80 surface showed only a cellular monolayer of 2-3 μm in thickness, with a mild inflammatory response and no fibrotic encapsulation. The PU/PLL-RGD peptide-modified substrate promoted an enhanced rate of macrophage cell fusion to form foreign body giant cell (FBGCs), whereas FBGCs were rarely observed on Tween80®-modified substrate. The expression levels of proinflammatory cytokines (TNF-α and IL-1β) were upregulated on PU/PLL-RGD surface followed by bare PU, whereas the cytokine expressions were significantly suppressed on PU/T80 surface. Thus, our study highlights modulation of foreign body response on polyurethane surfaces through surface entrapment technique in the form of differential responses observed on PLL-RGD and Tween80® modified surfaces with the former effective in triggering tissue cell adhesion thereby fibrous encapsulation, while the later

  16. Cytoplasmic fungal lipases release fungicides from ultra-deformable vesicular drug carriers.

    Directory of Open Access Journals (Sweden)

    Gero Steinberg

    Full Text Available The Transfersome® is a lipid vesicle that contains membrane softeners, such as Tween 80, to make it ultra-deformable. This feature makes the Transfersome® an efficient carrier for delivery of therapeutic drugs across the skin barrier. It was reported that TDT 067 (a topical formulation of 15 mg/ml terbinafine in Transfersome® vesicles has a much more potent antifungal activity in vitro compared with conventional terbinafine, which is a water-insoluble fungicide. Here we use ultra-structural studies and live imaging in a model fungus to describe the underlying mode of action. We show that terbinafine causes local collapse of the fungal endoplasmic reticulum, which was more efficient when terbinafine was delivered in Transfersome® vesicles (TFVs. When applied in liquid culture, fluorescently labeled TFVs rapidly entered the fungal cells (T(1/2~2 min. Entry was F-actin- and ATP-independent, indicating that it is a passive process. Ultra-structural studies showed that passage through the cell wall involves significant deformation of the vesicles, and depends on a high concentration of the surfactant Tween 80 in their membrane. Surprisingly, the TFVs collapsed into lipid droplets after entry into the cell and the terbinafine was released from their interior. With time, the lipid bodies were metabolized in an ATP-dependent fashion, suggesting that cytosolic lipases attack and degrade intruding TFVs. Indeed, the specific monoacylglycerol lipase inhibitor URB602 prevented Transfersome® degradation and neutralized the cytotoxic effect of Transfersome®-delivered terbinafine. These data suggest that (a Transfersomes deliver the lipophilic fungicide Terbinafine to the fungal cell wall, (b the membrane softener Tween 80 allows the passage of the Transfersomes into the fungal cell, and (c fungal lipases digest the invading Transfersome® vesicles thereby releasing their cytotoxic content. As this mode of action of Transfersomes is independent of the

  17. Solubility of ocular therapeutic agents in self-emulsifying oils. I. Self-emulsifying oils for ocular drug delivery: solubility of indomethacin, aciclovir and hydrocortisone.

    Science.gov (United States)

    Czajkowska-Kośnik, Anna; Sznitowska, Małgorzata

    2009-01-01

    Self-emulsifying drug delivery systems (SEDDS) were prepared by dissolving Cremophor EL, Tween 20, Tween 80 and Span 80 (1% or 5%) in oils (Miglyol 812 or castor oil). Solubilities of three ophthalmic drugs, namely aciclovir, hydrocortisone and indomethacin were determined in these systems. In addition, the effect of a small amount of water (0.5% and 2%) on solubilization properties of the systems was estimated. Of the three substances, indomethacin showed the best solubility in Miglyol while aciclovir was practically insoluble in this oil. The surfactants usually increased drug solubility in the oily phase. Only Tween 20 was found to decrease the solubility of aciclovir and hydrocortisone in Miglyol. Addition of a small amount of water to the oil/surfactant system increased solubility of hydrocortisone, but not of indomethacin. The results of the current study may be utilized to design a suitable composition of SEDDS and allow continuation of research on this type of drug carriers.

  18. Comparison of cytotoxicity in vitro and irritation in vivo for aqueous and oily solutions of surfactants.

    Science.gov (United States)

    Czajkowska-Kośnik, Anna; Wolska, Eliza; Chorążewicz, Juliusz; Sznitowska, Małgorzata

    2015-01-01

    The in vivo model on rabbit eyes and the in vitro cytotoxicity on fibroblasts were used to compare irritation effect of aqueous and oily (Miglyol 812) solutions of surfactants. Tween 20, Tween 80 and Cremophor EL were tested in different concentrations (0.1, 1 or 5%) and the in vitro test demonstrated that surfactants in oil are less cytotoxic than in aqueous solutions. In the in vivo study, the aqueous solutions of surfactants were characterized as non-irritant while small changes in conjunctiva were observed after application the oily solutions of surfactants and the preparations were classified as slightly irritant, however this effect was similar when Miglyol was applied alone. In conclusion, it is reported that the MTT assay does not correlate well with the Draize scores.

  19. Antigenotoxic effects of Citrus aurentium L. fruit peel oil on mutagenicity of two alkylating agents and two metals in the Drosophila wing spot test.

    Science.gov (United States)

    Demir, Eşref; Kocaoğlu, Serap; Cetin, Huseyin; Kaya, Bülent

    2009-07-01

    Antigenotoxic effects of Citrus aurentium L. (Rutaceae) fruit peel oil (CPO) in combination with mutagenic metals and alkylating agents were studied using the wing spot test of D. melanogaster. The four reference mutagens, potassium dichromate (K2Cr2O7), cobalt chloride (CoCl2), ethylmethanesulfonate (EMS), and N-ethyl-N-nitrosourea (ENU) were clearly genotoxic. CPO alone at doses from 0.1 to 0.5% in Tween 80 was not mutagenic and did not enhance the mutagenic effect of the reference mutagens. However, antigenotoxic effects of CPO were clearly demonstrated in chronic cotreatments with mutagens and oil, by a significant decrease in wing spots induced by all four mutagens. The D. melanogaster wing spot test was found to be a suitable assay for detecting antigenotoxic effects in vivo. Copyright 2009 Wiley-Liss, Inc.

  20. Benefits from additives and xylanase during enzymatic hydrolysis of bamboo shoot and mature bamboo.

    Science.gov (United States)

    Li, Kena; Wang, Xiao; Wang, Jingfeng; Zhang, Junhua

    2015-09-01

    Effects of additives (BSA, PEG 6000, and Tween 80) on enzymatic hydrolysis of bamboo shoot and mature bamboo fractions (bamboo green, bamboo timber, bamboo yellow, bamboo node, and bamboo branches) by cellulases and/or xylanase were evaluated. The addition of additives was comparable to the increase of cellulase loadings in the conversion of cellulose and xylan in bamboo fractions. Supplementation of xylanase (1 mg/g DM) with cellulases (10 FPU/g DM) in the hydrolysis of bamboo fractions was more efficient than addition of additives in the production of glucose and xylose. Moreover, addition of additives could further increase the glucose release from different bamboo fractions by cellulases and xylanase. Bamboo green exhibited the lowest hydrolyzability. Almost all of the polysaccharides in pretreated bamboo shoot fractions were hydrolyzed by cellulases with the addition of additives or xylanase. Additives and xylanase showed great potential for reducing cellulase requirement in the hydrolysis of bamboo. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. [BCG vaccination in low risk tuberculosis; first experiences after the suspension of BCG vaccination of newborns in Czechoslovakia].

    Science.gov (United States)

    Trnka, L; Danková, D

    1989-01-01

    With the steadily declining risk of tuberculosis infection in CSR the question arose whether vaccination of infants remains worthwhile considering not only resources spent but also complications to vaccination vis-a-vis benefits derived. A prospective study has been designed in which BCG vaccination of newborns is discontinued in an area with 30,000 newborns yearly. In the period from April 1, 1986 to January 31, 1988 there were not vaccinated 43,428 children (84.8% of the newborns). The collaboration of mothers was good. The one year old non-vaccinated children were tested with 2 TU PPD RT 23 with Tween 80. The distribution of positive tuberculin reactions appears unimodal, relatively large reactions being absent. 8 children had reactions with 6 or more mm induration. That corresponds to a risk of infection of 0.04%. The project continues in the research area and might be extended to another area.

  2. Synthesis and toxicity test of magnetic nanoparticle via biocompatible microemulsion system as template for application in targeted drug delivery

    Science.gov (United States)

    Kader, Razinah Abdul; Rose, Laili Che; Suhaimi, Hamdan; Manickam, Mariessa Soosai

    2017-09-01

    This work reports the preparation of magnetic nanoparticles (FeNPs) using biocompatible W/O microemulsion for biomedical applications. W/O microemulsion was formed using decane as oil phase, water, tween 80 as non-ionic surfactant and hexanol as organic solvent. The synthesized FeNPs were characterised by using Fourier Transform Infrared Resonance Spectroscopy (FTIR), Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD). The FTIR showed that Fe-O bond exist on 581cm-1 having strong magnetic strength whereas SEM showed the morphology surface of magnetic nanoparticles (FeNPs). Furthermore, analysis of XRD pattern magnetic nanoparticles (FeNPs) reveals a cubic iron oxide phase with good crystallize structure. Furthermore, toxicity test on human liver cells proved that it is 70% safe on human and proved to be a safety nanomedicine.

  3. Alkyl caffeates as antioxidants in O/W emulsions: Impact of emulsifier type and endogenous tocopherols

    DEFF Research Database (Denmark)

    Sørensen, Ann-Dorit Moltke; Villeneuve, Pierre; Jacobsen, Charlotte

    2017-01-01

    , the aim was to evaluate the impact of emulsifiers (Citrem and Tween80) and presence of endogenous tocopherols on the efficacies of caffeic acid and caffeates (C1–C20) as antioxidants in emulsions. Lipid oxidation was evaluated during storage and partitioning of caffeic acid and caffeates was estimated...... by measuring their concentrations in the aqueous phase. Partitioning of caffeic acid and caffeates was influenced by emulsifier type and the presence of endogenous tocopherols. Caffeic acid was the most efficient antioxidant in Citrem and Tween stabilized emulsions in the presence of endogenous tocopherol....... In contrast, for Tween stabilized emulsions, caffeic acid acted as a prooxidant and the evaluated caffeates acted as strong antioxidants in the absence of endogenous tocopherol. Thus, when endogenous tocopherol was present lipophilization of caffeic acid did not increase its efficacy as an antioxidant...

  4. Multivariable parameter optimization for the endoglucanase production by Trichoderma reesei Rut C30 from Ocimum gratissimum seed

    Directory of Open Access Journals (Sweden)

    Mithu Das

    2008-02-01

    Full Text Available The aim of this study was to evaluate the interaction effects of the physico-chemical parameters on the endoglucanase (CMCase production by Trichoderma reesei Rut C30 on a cellulosic agro-residue by the solid-state fermentation (SSF and to determine their optimum values by the EVOP factorial design technique. The best combination of physical parameters for the maximum production of the endoglucanase (CMCase was 28ºC temperature, 79% relative humidity and 4.8 pH of the medium. The best combination of the chemical parameters was (mg/L nicotinic acid 15, naphthalene acetic acid 7, ferric chloride 5 and Tween-80 6. With the application of this technique, the yield of the CMCase increased by ~ 2.3 fold.

  5. Niosome Encapsulation of Curcumin: Characterization and Cytotoxic Effect on Ovarian Cancer Cells

    Directory of Open Access Journals (Sweden)

    Ying-Qi Xu

    2016-01-01

    Full Text Available Curcumin, a natural chemical compound found in Curcuma longa, has been applied in multiple medicinal areas from antibiotic to antitumor treatment. However, the chemical structure of curcumin results in poor stability, low solubility, and rapid degradation in vivo, hindering its clinical utilization. To address these issues, we have developed a novel niosome system composed of nonionic surfactants: Span 80, Tween 80, and Poloxamer 188. Curcumin was encapsulated in the niosomes with a high entrapment efficiency of 92.3±0.4%. This system provided controlled release of curcumin, thereby improving its therapeutic capability. Dynamic dialysis was conducted to evaluate the in vitro drug release of curcumin-niosomes. Curcumin-niosomes exhibited enhanced cytotoxic activity and apoptotic rate against ovarian cancer A2780 cells compared with freely dispersed curcumin. These results demonstrate that the curcumin-niosome system is a promising strategy for the delivery of curcumin and ovarian cancer therapy.

  6. Optimization of Emulsifying Effectiveness of Phytosterol in Milk Using Two-Level Fractional Factorial Design

    Directory of Open Access Journals (Sweden)

    He Yunxia

    2017-12-01

    Full Text Available In this paper emulsifying effects of seven emulsifiers including Tween 80, Span 80, tripolyglycerol monostearate, sodium stearoyl lactylate, sucrose ester, soy lecithin and monoglyceride on phytosterol in milk were investigated using single factor test and fractional factorial design. The addition for seven emulsifiers were in the following concentrations: 0.1%, 0.2%, 0.3%, 0.4%, 0.5% and 0.6%. The results revealed that tripolyglycerol monostearate, sucrose ester and monoglyceride had a significant emulsifying effect on phytosterol in milk, Tripolyglycerol monostearate showed a positive emulsifying effect on phytosterol in milk, while sucrose ester and monoglyceride exhibited a negative emulsifying effect on phytosterol in milk.

  7. Preparation of poly(urethane-urea nanoparticles containing açaí oil by miniemulsion polymerization

    Directory of Open Access Journals (Sweden)

    Alexsandra Valério

    2013-01-01

    Full Text Available Polyurethane nanoparticles (NPs are promising candidates for the controlled and targeted delivery of therapeutics in a variety of biomedical applications. In this work, a report is made of NPs produced by miniemulsion polymerization with isophorone diisocyanate (IPDI and castor oil, glycerol, and poly(ethylene glycol (PEG with molar masses 400 and 1000 as monomers and Tween 80, Span 80 and Lutensol AT 25 as surfactant and açaí oil as costabilizer. Stable dispersions with sizes between 100 - 500 nm were achieved. The effects from polyol, types and concentration of surfactant and reaction temperature on the size of the NPs and weight average molar mass were evaluated. Morphological characterization was accomplished using images from Transmission Electron Microscopy (TEM and Scanning Electron Microscope (SEM.

  8. Optimization of γ-amino butyric acid production in a newly isolated Lactobacillus brevis.

    Science.gov (United States)

    Binh, Tran Thi Thanh; Ju, Wan-Taek; Jung, Woo-Jin; Park, Ro-Dong

    2014-01-01

    An isolate from kimchi, identified as Lactobacillus brevis, accumulated γ-aminobutyric acid (GABA), a major inhibitory neurotransmitter, in the culture medium. Optimal culture conditions for growth of L. brevis and production of GABA were 6 % (w/v) l-glutamic acid, 4 % (w/v) maltose, 2 % (w/v) yeast extract, 1 % (w/v) NaCl, 1 % (w/v) CaCl2, 2 g Tween 80/l, and 0.02 mM pyridoxal 5′-phosphate at initial pH 5.25 and 37 °C. GABA reached 44.4 g/l after 72 h cultivation with a conversion rate 99.7 %, based on the amount (6 %) of l-glutamic acid added. GABA was purified using ion exchange column chromatography with 70 % recovery and 97 % purity.

  9. Efeito fungitóxico do óleo essencial de aroeira da praia (Schinus terebinthifolius RADDI sobre Colletotrichum gloeosporioides Fungitoxic effect of essential oil from aroeira (Schinus terebinthifolius RADDI on Colletotrichum gloeosporioides

    Directory of Open Access Journals (Sweden)

    L.F.G Oliveira Junior

    2013-01-01

    Full Text Available Neste trabalho foi avaliado o efeito do óleo essencial do fruto de Schinus terebinthifolius sobre o crescimento micelial do fungo Colletotrichum gloeosporioides in vitro, e no desenvolvimento da antracnose no período de pós-colheita em mamões. As diferentes concentrações de óleo foram diluídas em Tween 80 a 8%. No experimento in vitro foram preparados meios de cultura BDA nas concentrações de 0,05; 0,10; 0,25 e 0,50% do óleo essencial. O controle negativo foi realizado apenas com meio BDA e o controle solvente com meio BDA e Tween 80 a 8%. A inibição do crescimento do fungo foi diretamente proporcional à quantidade do óleo e a maior inibição encontrada foi de 79,07% na concentração de óleo de 0,50%. No experimento in vivo os frutos do mamoeiro foram inoculados com o fungo em quatro tratamentos: com biofilme; com biofilme mais 0,50% do óleo; com fungicida Prochloraz e frutos controle. Embora o tratamento com óleo tenha sido eficiente contra o fungo, não foi indicado comercialmente, pois apresentou valores elevados de perda de massa fresca, de firmeza, e também sintomas de fitotoxidade. O óleo tem propriedade antifúngica contra C. gloeosporioides in vitro e in vivo, contudo, não é recomendado para o mamão em função da fitotoxidezThis study evaluated the effect of essential oil from Schinus terebinthifolius fruit on the mycelial growth of the fungus Colletotrichum gloeosporioides in vitro and on the anthracnose development during the postharvest period of papaya fruits. The different oil concentrations were diluted in 8% Tween 80. For the in vitro experiment, PDA culture media were prepared at the concentrations of 0.05, 0.10, 0.25 and 0.50% essential oil. Negative control was prepared with PDA medium alone, while solvent control was prepared with PDA medium and 8% Tween 80. Fungal growth inhibition was directly proportional to the oil amount and the greatest inhibition was 79.07% at 0.50% oil concentration. For the

  10. Comparison of several ethanol productions using xylanase, inorganic salts, surfactant

    Science.gov (United States)

    Wu, Yan; Lu, Jie; Yang, Rui-feng; Song, Wen-jing; Li, Hai-ming; Wang, Hai-song; Zhou, Jing-hui

    2017-03-01

    Liquid hot water (LHW) pretreatment is an effective and environmentally friendly method to produce bioethanol with lignocellulosic materials. Corn stover was pretreated with liquid hot water (LHW) and then subjected to semi-simultaneous saccharification and fermentation (S-SSF) to obtain high ethanol concentration and yield. The present study aimed to confirm the effect of several additives on the fermentation digestibility of unwashed WIS of corn stover pretreated with LHW. So we also investigated the process, such as enzyme addition, inorganic salts, surfactant and different loading Triton. Results show that high ethanol concentration is necessary to add xylanase in the stage of saccharification. The ethanol concentration increased mainly with magnesium ion on fermentation. Comparing with Tween 80, Span 80 and Polyethylene glycol, Triton is the best surfactant. In contrast to using xylanase and Triton respectively, optimization can make up the lack of stamina and improve effect of single inorganic salts.

  11. A Comparison between Use of Spray and Freeze Drying Techniques for Preparation of Solid Self-Microemulsifying Formulation of Valsartan and In Vitro and In Vivo Evaluation

    Science.gov (United States)

    Singh, Sanjay Kumar; Vuddanda, Parameswara Rao; Singh, Sanjay; Srivastava, Anand Kumar

    2013-01-01

    The objective of the present study was to develop self micro emulsifying formulation (SMEF) of valsartan to improve its oral bioavailability. The formulations were screened on the basis of solubility, stability, emulsification efficiency, particle size and zeta potential. The optimized liquid SMEF contains valsartan (20% w/w), Capmul MCM C8 (16% w/w), Tween 80 (42.66% w/w) and PEG 400 (21.33% w/w) as drug, oil, surfactant and co-surfactant, respectively. Further, Liquid SMEF was adsorbed on Aerosol 200 by spray and freeze drying methods in the ratio of 2 : 1 and transformed into free flowing powder. Both the optimized liquid and solid SMEF had the particle size valsartan as compared to existing formulations with improved bioavailability. PMID:23971048

  12. Assessing PAH removal from clayey soil by means of electro-osmosis and electrodialysis

    DEFF Research Database (Denmark)

    Lima, Ana T.; Ottosen, Lisbeth M.; Heister, Katja

    2012-01-01

    Polycyclic aromatic hydrocarbons (PAH) are persistent and toxic contaminants which are difficult to remove from fine porous material like clayey soils. The present work aims at studying two electroremediation techniques for the removal of PAHs from a spiked natural silt soil from Saudi Arabia...... and a silty loam soil from The Netherlands which has been exposed to tar contamination for over 100years. The two techniques at focus are electro-osmosis and electrodialysis. The latter is applied for the first time for the removal of PAH. The efficiency of the techniques is studied using these two soils......, having been subjected to different PAH contact times.Two surfactants were used: the non-ionic surfactant Tween 80 and anionic surfactant sodium dodecyl sulphate (SDS) to aid desorption of PAHs from the soil. Results show a large discrepancy in the removal rates between spiked soil and long-term field...

  13. Isolation of a variant of Candida albicans.

    Science.gov (United States)

    Buckley, H R; Price, M R; Daneo-Moore, L

    1982-01-01

    During the course of Candida albicans antigen production, a variant of this organism was encountered which did not produce hyphae at 37 degrees C. Presented here are some of the characteristics of this variant. It produces hyphae at 25 degrees C on cornmeal agar and synthetic medium plus N-acetylglucosamine and Tween 80. At 37 degrees C, it does not produce hyphae on these media, although C. albicans normally does produce hyphae under these circumstances. In liquid synthetic medium, this variant does not produce hyphae at 37 degrees C. The variant strain was analyzed for DNA, RNA, protein content, and particle size. After 50 to 70 h in balanced exponential-phase growth, particle size distribution was narrow, and there were no differences in the DNA, RNA, or protein content per particle in the two strains. When balanced exponential-phase cultures were brought into stationary phase, both strains contained the same amount of DNA per cell. Images PMID:6752021

  14. Clinical, microbiological, and experimental animal studies of Candida lipolytica.

    Science.gov (United States)

    Walsh, T J; Salkin, I F; Dixon, D M; Hurd, N J

    1989-01-01

    Candida lipolytica was recovered from six patients in three different clinical centers. The index isolate caused a persistent fungemia with catheter-associated Candida thrombophlebitis, the second isolate was from a polymicrobial sinusitis, and the remaining four isolates were involved in tissue colonization. These and 20 other isolates were consistent in their morphological and physiological characteristics. All formed true hyphae and blastoconidia on cornmeal-Tween 80 agar and all assimilated glucose, glycerol, and erythritol. In a murine model of disseminated candidiasis, the index isolate that caused clinical fungemia caused no mortality and produced only two lesions on a kidney, as determined at necropsy. The nine isolates selected for in vitro antifungal susceptibility studies had intermediate susceptibilities to amphotericin B but were susceptible to ketoconazole. We conclude that C. lipolytica is a weakly virulent pathogen which may require an intravascular foreign body to cause fungemia. Images PMID:2745702

  15. Isolation of a variant of Candida albicans.

    Science.gov (United States)

    Buckley, H R; Price, M R; Daneo-Moore, L

    1982-09-01

    During the course of Candida albicans antigen production, a variant of this organism was encountered which did not produce hyphae at 37 degrees C. Presented here are some of the characteristics of this variant. It produces hyphae at 25 degrees C on cornmeal agar and synthetic medium plus N-acetylglucosamine and Tween 80. At 37 degrees C, it does not produce hyphae on these media, although C. albicans normally does produce hyphae under these circumstances. In liquid synthetic medium, this variant does not produce hyphae at 37 degrees C. The variant strain was analyzed for DNA, RNA, protein content, and particle size. After 50 to 70 h in balanced exponential-phase growth, particle size distribution was narrow, and there were no differences in the DNA, RNA, or protein content per particle in the two strains. When balanced exponential-phase cultures were brought into stationary phase, both strains contained the same amount of DNA per cell.

  16. Bacteriocinogenic Lactococcus lactis subsp. lactis DF04Mi isolated from goat milk: characterization of the bacteriocin

    Directory of Open Access Journals (Sweden)

    Danielle N. Furtado

    2014-12-01

    Full Text Available Lactic acid bacteria capable of producing bacteriocins and presenting probiotic potential open innovative technological applications in the dairy industry. In this study, a bacteriocinogenic strain (Lactococcus lactis subsp. lactis DF4Mi was isolated from goat milk, and studied for its antimicrobial activity. The bacteriocin presented a broad spectrum of activity, was sensitive to proteolytic enzymes, resistant to heat and pH extremes, and not affected by the presence of SDS, Tween 20, Tween 80, EDTA or NaCl. Bacteriocin production was dependent on the components of the culture media, especially nitrogen source and salts. When tested by PCR, the bacteriocin gene presented 100% homology to nisin Z gene. These properties indicate that this L. lactis subsp. lactis DF4Mi can be used for enhancement of dairy foods safety and quality.

  17. Development of novel Alicyclobacillus spp. isolation medium.

    Science.gov (United States)

    Chang, S; Kang, D-H

    2005-01-01

    To develop a new isolation medium with higher recovery rates of Alicyclobacillus spp. SK agar was developed with optimized incubation temperature, pH, acidulant, Tween 80 concentration and divalent cation addition. Results indicate that detection of Alicyclobacillus spp. by SK agar was significantly higher (P > 0.05) than those obtained by K agar, orange serum agar, and potato dextrose agar. Current media used for Alicyclobacillus spp. isolation still resulted in high numbers of false negative products. The sensitivity of SK agar to Alicyclobacillus spp. allows detection of low numbers of Alicyclobacillus spp. and also provides a more higher isolation results compared with currently used media. SK agar will be useful to the fruit juice industry to obtain more accurate numbers of contaminant Alicyclobacillus spp. With this media, false negative samples can be reduced, and the likelihood of exported products being rejected can be greatly reduced.

  18. Structurally modified pectin for targeted lipid antioxidant capacity in linseed/sunflower oil-in-water emulsions.

    Science.gov (United States)

    Celus, Miete; Salvia-Trujillo, Laura; Kyomugasho, Clare; Maes, Ine; Van Loey, Ann M; Grauwet, Tara; Hendrickx, Marc E

    2018-02-15

    The present work explored the lipid antioxidant capacity of citrus pectin addition to 5%(w/v) linseed/sunflower oil emulsions stabilized with 0.5%(w/v) Tween 80, as affected by pectin molecular characteristics. The peroxide formation in the emulsions, containing tailored pectin structures, was studied during two weeks of storage at 35°C. Low demethylesterified pectin (≤33%) exhibited a higher antioxidant capacity than high demethylesterified pectin (≥58%), probably due to its higher chelating capacity of pro-oxidative metal ions (Fe 2+ ), whereas the distribution pattern of methylesters along the pectin chain only slightly affected the antioxidant capacity. Nevertheless, pectin addition to the emulsions caused emulsion destabilization probably due to depletion or bridging effect, independent of the pectin structural characteristics. These results evidence the potential of structurally modified citrus pectin as a natural antioxidant in emulsions. However, optimal conditions for emulsion stability should be carefully selected. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. SENSITIVITY OF MOLDS ISOLATED FROM WAREHOUSES OF FOOD PRODUCTION FACILITY ON SELECTED ESSENTIAL OILS

    Directory of Open Access Journals (Sweden)

    Łukasz Kręcidło

    2015-07-01

    Full Text Available Storage of raw materials is one of steps in food production chain. The aim of this study was to estimate the influence of selected essential oils on the growth of four fungal strains: Trichoderma viride, Rhizomucor miehei, Penicillium chrysogenum, Penicillium janthinellum. Strains were isolated from warehouses of the food production facility. Selected essential oils: thyme oil, rosewood oil and rosemary oil were used to assess antifungal activity. Chemical composition of essential oils was determined by Gas Chromatography-Mass Spectroscopy (GC-MS. Antifungal activity of essential oils was estimated in relative to peracetic acid (PAA and sterile water with Tween 80 (0,5%. The influence of essential oils on fungal growth was carried by medium poisoning method. Increment of fungal mycelium was measured every day by 10 days. The thyme essential oils totally inhibited fungal growth in the lowest concentration of 1 mm3·cm-3. The most resistant strain was Penicillium janthinellum.

  20. Modulation of drug release from nanocarriers loaded with a poorly water soluble drug (flurbiprofen) comprising natural waxes.

    Science.gov (United States)

    Baviskar, D T; Amritkar, A S; Chaudhari, H S; Jain, D K

    2012-08-01

    In this study, flurbiprofen (FLB) Solid Lipid Nanoparticles (SLN) composed from a mixture of beeswax and carnauba wax, Tween 80 and egg lecithin as emulsifiers have been prepared. FLB was incorporated as model lipophilic drug to assess the influence of matrix composition in the drug release profile. SLN were produced by microemulsion technique. In vitro studies were performed in Phosphate Buffered Saline (PBS). The FLB loaded SLN showed a mean particle size of 75 +/- 4 nm, a polydispersity index approximately 0.2 +/- 0.02 and an entrapment efficiency (EE) of more than 95%. Suspensions were stable, with zeta potential values in the range of -15 to -17 mV. DSC thermograms and UV analysis indicated the stability of nanoparticles with negligible drug leakage. Nanoparticles with higher beeswax content in their core exhibited faster drug release than those containing more carnauba wax.

  1. Preparation of poly(Urethane-urea) nanoparticles containing acai oil by mini emulsion polymerization

    International Nuclear Information System (INIS)

    Valerio, Alexsandra; Araujo, Pedro H.H.; Sayer, Claudia

    2013-01-01

    Polyurethane nanoparticles (NPs) are promising candidates for the controlled and targeted delivery of therapeutics in a variety of biomedical applications. In this work, a report is made of NPs produced by mini emulsion polymerization with isophorone diisocyanate (IPDI) and castor oil, glycerol, and poly(ethylene glycol) (PEG) with molar masses 400 and 1000 as monomers and Tween 80, Span 80 and Lutensol AT 25 as surfactant and acai oil as costabilizer. Stable dispersions with sizes between 100 - 500 nm were achieved. The effects from polyol, types and concentration of surfactant and reaction temperature on the size of the NPs and weight average molar mass were evaluated. Morphological characterization was accomplished using images from Transmission Electron Microscopy (TEM) and Scanning Electron Microscope (SEM). (author)

  2. Synthesis of mesoporous silica microsphere from dual surfactant

    Directory of Open Access Journals (Sweden)

    Venkatathri Narayanan

    2008-12-01

    Full Text Available A new procedure is reported to synthesis mesoporous silica micro sphere for the first time. In these method two surfactants namely Span 80 and Tween 80 were used. Small angle X ray diffraction and N2 adsorption analysis shows the synthesized material has mesoporous property. The material has spherical morphology with 1-10 µm particle size. Beside the material found to have microcapsule property as observed from the Transmission electron microscopy. The Fourier transform Infrared spectroscopic analysis reveals that the materials are similar to other mesoporous materials. We also encapsulated an UV-absorber Ibuprofen inside the microcapsule, by mixing it before the synthesis. This shows a possibility of the materials in cosmetic applications.

  3. Bioconversion potential of Trichoderma viride HN1 cellulase for a lignocellulosic biomass Saccharum spontaneum.

    Science.gov (United States)

    Iqtedar, Mehwish; Nadeem, Mohammad; Naeem, Hira; Abdullah, Roheena; Naz, Shagufta; Qurat ul Ain Syed; Kaleem, Afshan

    2015-01-01

    The industrialisation of lignocellulose conversion is impeded by expensive cellulase enzymes required for saccharification in bioethanol production. Current research undertakes cellulase production from pretreated Saccharum spontaneum through Trichoderma viride HN1 under submerged fermentation conditions. Pretreatment of substrate with 2% NaOH resulted in 88% delignification. Maximum cellulase production (2603 ± 16.39 U/mL/min carboxymethyl cellulase and 1393 ± 25.55 U/mL/min FPase) was achieved at 6% substrate at pH 5.0, with 5% inoculum, incubated at 35°C for 120 h of fermentation period. Addition of surfactant, Tween 80 and metal ion Mn(+2), significantly enhanced cellulase yield. This study accounts proficient cellulase yield through process optimisation by exploiting cheaper substrate to escalate their commercial endeavour.

  4. Utilization of coconut oil cake for the production of lipase using Bacillus coagulans VKL1.

    Science.gov (United States)

    Gowthami, Palanisamy; Muthukumar, Karuppan; Velan, Manickam

    2015-01-01

    The overproduction of enzymes was performed by manipulating the medium components. In our study, solvent-tolerant thermophilic lipase-producing Bacillus coagulans was isolated from soil samples and a stepwise optimization strategy was employed to increase the lipase production using coconut oil cake basal medium. In the first step, the influence of pH, temperature, carbon source, nitrogen source and inducers on lipase activity was investigated by the One-Factor-At-A-Time (OFAT) method. In the second step, the three significant factors resulted from OFAT were optimized by the statistical approach (CCD).The optimum values of olive oil (0.5%), Tween 80 (0.6%) and FeSO4 (0.05%) was found to be responsible for a 3.2-fold increase in the lipase production identified by Central Composite Design.

  5. Preparation of poly(Urethane-urea) nanoparticles containing acai oil by mini emulsion polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Valerio, Alexsandra; Araujo, Pedro H.H.; Sayer, Claudia, E-mail: csayer@enq.ufsc.br [Universidade Federal de Santa catarina (UFSC), SC (Brazil). Dept. de Quimica e Engenharia de Alimentos

    2013-07-01

    Polyurethane nanoparticles (NPs) are promising candidates for the controlled and targeted delivery of therapeutics in a variety of biomedical applications. In this work, a report is made of NPs produced by mini emulsion polymerization with isophorone diisocyanate (IPDI) and castor oil, glycerol, and poly(ethylene glycol) (PEG) with molar masses 400 and 1000 as monomers and Tween 80, Span 80 and Lutensol AT 25 as surfactant and acai oil as costabilizer. Stable dispersions with sizes between 100 - 500 nm were achieved. The effects from polyol, types and concentration of surfactant and reaction temperature on the size of the NPs and weight average molar mass were evaluated. Morphological characterization was accomplished using images from Transmission Electron Microscopy (TEM) and Scanning Electron Microscope (SEM). (author)

  6. Larvicidal effects of mineral turpentine, low aromatic white spirits, aqueous extracts of Cassia alata, and aqueous extracts, ethanolic extracts and essential oil of betel leaf (Piper betle) on Chrysomya megacephala.

    Science.gov (United States)

    Kumarasinghe, Sujith Prasad W; Karunaweera, Nadira D; Ihalamulla, Ranjan L; Arambewela, Lakshmi S R; Dissanayake, Roshinie D S C T

    2002-12-01

    Many methods have been employed, with variable success, in the treatment of cutaneous myiasis caused by Chrysomya species. Experiment 1: to assess the larvicidal effect of mineral turpentine (MT) and the main ingredient of MT, low aromatic white spirits (LAWS), on Chrysomya megacephala larvae in vitro. Experiment 2: to assess the larvicidal effects of aqueous extracts of winged senna (Cassia alata), and aqueous extracts, ethanolic extracts and essential oil of betel leaf (Piper betle). In experiment 1, two samples of LAWS were obtained from two industrialists (samples 1 and 2). Adult flies of C. megacephala were bred in the insectory of the Department of Parasitology, Faculty of Medicine, University of Colombo. Petri dishes were prepared with pads of cotton wool. These cotton pads were soaked separately in MT, LAWS samples 1 and 2, and normal saline as a control. Ten larvae were placed in each Petri dish. The activity of the larvae was observed and recorded half-hourly. MT and the two samples of LAWS were analyzed by chromatography. In experiment 2, volatile essential oil of betel was prepared using a standard steam distillation process. An ethanolic extract of betel was obtained after boiling the crushed leaf with water, and mixing the stock with ethanol. Betel oil dilutions of 1-4% were prepared using 1% Tween 80 (v/v aq) as a solvent, with 0.05 g/100 mL sodium lauryl sulphate (as stabilizer) and 0.01 g/100 mL methyl paraben (as a preservative). Cotton wool swabs soaked in 1, 2, 3 and 4% essential oil of betel in 1% Tween 80 (v/v aq) prepared as above, 1, 2, 3 and 4% ethanolic extract of betel, 50 and 25% aqueous extract of C. alata, and 50 and 25% aqueous extract of betel were placed in separate Petri dishes. Ten larvae were placed in each Petri dish. 1% Tween 80 solvent with the stabilizer and the preservative, but without betel essential oil, was used as a negative control and MT was used as a positive control. Larval motility was assessed as before. MT and

  7. Physico-chemical characterisation, cytotoxic activity, and biocompatibility studies of tamoxifen-loaded solid lipid nanoparticles prepared via a temperature-modulated solidification method.

    Science.gov (United States)

    Lakkadwala, Sushant; Nguyen, Sanko; Lawrence, Joseph; Nauli, Surya M; Nesamony, Jerry

    2014-01-01

    Solid lipid nanoparticles (SLNs) can efficiently and efficaciously incorporate anti-cancer agents. To prepare and characterise tamoxifen (TAM)-loaded SLNs. Glyceryl monostearate, Tween-80, and trehalose were used in SLNs. SLNs were tested via dynamic light scattering (DLS), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). Characterisation studies revealed SLNs of about 540 nm with a negative surface charge and confirmed the entrapment of TAM in the SLNs. The entrapment efficiency was estimated to be 60%. The in vitro drug release profile demonstrated a gradual increase followed by a release plateau for several days. A drug concentration-dependent increase in cytotoxic activity was observed when the SLNs were evaluated in cell cultures. Biocompatible and stable lyophilised SLNs were successfully prepared and found to possess properties that may be utilised in an anti-cancer drug delivery system.

  8. The study of stability, combustion characteristics and performance of water in diesel emulsion fuel

    Directory of Open Access Journals (Sweden)

    Syafiq Zulkifli

    2017-01-01

    Full Text Available A single cylinder diesel engine study of water in diesel emulsions was conducted to investigate the stability effect of emulsion fuel on three different fuel blends and the water emulsification effect on the engine performance. Emulsified fuels contained 2% of surfactant including Span 80 Tween 80 and tested 10 HLB number. The blends also varied of 5%, 10% and 15% of water in diesel ratios namely as BSW5, BSW10 and BSW15. The fuel blends performance was tested using a single cylinder, direct injection diesel engine, operating at 1860 rpm. The results on stability reveal that high shear homogenizer yields more stability on emulsion fuel than mechanical stirrer and ultrasonic water bath. The engine performance results show that the ignition delay and peak pressure increase with the increment of water percentage up to 15%. However, the results indicate the increment of water percentage is also shows a significant decrease in engine power.

  9. 聚苯乙烯包覆正十四醇微胶囊的制备及表征%Preparation and Characterization of Myristyl Alcohol Microcapsules Coated with Polystyrene

    Institute of Scientific and Technical Information of China (English)

    黄云峰; 闵洁; 叶琳; 王丽萍; 李帅涛; 宋晓秋

    2017-01-01

    选用过硫酸钾(K2S2O8)为引发剂,司班80(Span 80)和吐温80(Tween80)为复配乳化剂,聚乙烯吡咯烷酮K30(PVP-K30)为分散剂,季戊四醇四丙烯酸酯(PETA)为交联剂,采用乳液聚合法制备出了以正十四醇(MA)为芯材,聚苯乙烯(PS)为壁材的正十四醇-聚苯乙烯相变微胶囊(MA/PS微胶囊);通过差示扫描量热仪、扫描电镜、傅里叶变换红外光谱仪和热重分析仪等仪器对制备的微胶囊进行检测袁征.结果表明,当聚乙烯吡咯烷酮K30和复配乳化剂(m(Span80):m(Tween80)=3:13)加入量分别为正十四醇质量的5%和4%,过硫酸钾和季戊四醇四丙烯酸酯加入量分别为苯乙烯单体质量的10%和37.5%,芯壁比为2.5:1,搅拌速度为1000 r/min时,所制备的MA/PS微胶囊具有良好的热稳定性和致密性.%Myristyl alcohol-polystyrene phase change microcapsules (MA/PS microcapsules) were prepared by emulsion polymerization with myristyl alcohol (MA) as core material,polystyrene (PS) as outer shell,potassium peroxodisulfate (K2S2O8) as initiator,Span 80 and Tween 80 as complex emulsifiers,the polyvinyl pyrrolidone K30 (PVP-K30) as dispersant and pentaerythritol tetraacrylate (PETA) as crosslinking agent.The microcapsules were characterized by differential scanning calorimetry (DSC),scanning electron microscopy (SEM),Fourier transform infrared spectroscopy (FT-IR),thermogravimetric analyzer (TGA),et al.The results show that the prepared MA/ PS microcapsules have good thermal stability and compactness when the amount of polyvinylpyrrolidone K30 and compound emulsifier (m(Span80):m(Tween80)=3:13) is 5% and 4% of the mass of myristyl alcohol,respectively,potassium persulfate and pentaerythritol tetraacrylate are added 10 % and 37.5 % of the mass of styrene monomer respectively,the ratio of core to wall is 2.5:1 and the stirring speed is 1000 r/min.

  10. Survival of encapsulated potentially probiotic Lactobacillus plantarum D6SM3 with bioemulsifier derived from spent yeast in simulated gastrointestinal conditions

    Directory of Open Access Journals (Sweden)

    Paweena Dikit

    2015-08-01

    Full Text Available The effect of encapsulation with three kinds of emulsifier (Tween 80, gum arabic and bioemulsifier extracted from spent yeast on the survival of Lactobacillus plantarum D6SM3 in simulated gastrointestinal tract during storage at 4°C and room temperature was investigated. The survival of all encapsulated cells treated in simulated gastric juice was higher than free cells at both pH 2.5 and 3.0. The viability of the free and encapsulated cells showed a gradual decline throughout the storage period at 4°C. However, the viability rapidly declined at room temperature. In addition, the droplet size distribution of encapsulated cells was compared between those with and without an emulsifier by using the laser diffraction method. The particle size and polydispersity value of encapsulated cells were controlled better in emulsion with emulsifier added. The surface of encapsulated cells with emulsifier exhibited smoother characteristics than those without emulsifier.

  11. Application of Surfactant Micellar Solutions as Extractants and Mobile Phases for TLC-Determination of Purine Bases and Doping Agents in Biological Liquids

    Directory of Open Access Journals (Sweden)

    Daria Victorovna Yedamenko

    2015-04-01

    Full Text Available Separation of caffeine and its metabolites (theophylline and theobromine and doping agents (spironolactone, propranolol, and ephedrine and determination of caffeine in serum sample and propranolol and ephedrine in urine were studied on normal-phase thin layers (“Sorbfil-UV-254”. Aqueous organic solvents and aqueous micellar surfactant solutions were compared as the mobile phases for separation. The acceptable separation of purine bases and doping agents was achieved by micellar Thin Layer Chromatography and normal-phase Thin Layer Chromatography. Anionic surfactant solution with added 1-propanol was the best eluent as for caffeine, theophylline, and theobromine separation, as for doping agents. The best characteristics of caffeine extraction from serum, and propranolol and ephedrine from urine were achieved when micellar eluent based on non-ionic Tween-80 surfactant was used. DOI: http://dx.doi.org/10.17807/orbital.v7i1.632

  12. Isolation of Yersinia from raw meat (pork and chicken) and precooked meat (porcine tongues and sausages) collected from commercial establishments in Mexico City.

    Science.gov (United States)

    Ramírez, E I; Vázquez-Salinas, C; Rodas-Suárez, O R; Pedroche, F F

    2000-04-01

    A total of 160 meat product samples were collected from commercial outlets in Mexico City to investigate the presence of different species of Yersinia by the 4 degrees C enrichment method after 1, 3, 5, and 7 days of incubation using alkaline treatment and isolating in cefsulodin-Irgasan-novobiocin and MacConkey agars with Tween 80. Overall, Yersinia spp. were isolated from 27% of the samples analyzed, whereas 40% of the raw and only 13% of the precooked samples were contaminated. Although 2,970 colonies showed Yersinia characteristics, only 706 (24%) actually corresponded to this genus: 49% were Yersinia enterocolitica, 25% Yersinia kristensenii, 15% Yersinia intermedia, 9% Yersinia frederiksenii, and 2% Yersinia aldovae; 10% corresponded to biotype 2, 2% to biotype 3, and 4% to biotype 4. The presence of Yersinia in raw and cooked meat products represents a health risk for consumers in Mexico, where further clinical studies are needed to assess the epidemiological importance of this pathogen.

  13. Topical microemulsion containing Punica granatum extract: its control over skin erythema and melanin in healthy Asian subjects.

    Science.gov (United States)

    Parveen, Rashida; Akhtar, Naveed; Mahmood, Tariq

    2014-12-01

    Punica granatum is apotent source of polyphenolic compounds with strong free radicals scavenging activity. The skin lightening effects of Punica granatum are assumed due to ellagic acid which acts by chelating copper at the active site of tyrosinase. To explore a topical microemulsion (O/W) of pomegranate (Punica granatum) extract for its control on skin erythema and melanin. Microemulsions were formulated using a polysorbate surfactant (Tween 80(®)) along with cosurfactant (propylene glycol) and were characterized regarding their stability. The placebo microemulsion (without extract) and the active microemulsion (containing Punica extract) were applied in a split face fashion by the volunteers (n = 11) for a period of 12 weeks. Skin erythema and melanin were measured at baseline and after every 15 days to determine any effect produced by these formulations. Active formulation showed a significant impact on skin erythema and melanin (p Punica granatum extract for conditions where elevated skin melanin and erythema have significantly prone skin physiology.

  14. MOLECULAR CLONING AND CHARACTERIZATION OF NOVEL THERMOSTABLE LIPASE FROM SHEWANELLA PUTREFACIENS AND USING ENZYMATIC BIODIESEL PRODUCTION

    Directory of Open Access Journals (Sweden)

    Fahri Akbas

    2015-02-01

    Full Text Available A novel thermostable lipase from Shewanella putrefaciens was identified, expressed in Escherichia coli, characterized and used in biodiesel production. Enzyme characterization was carried out by enzyme assay, SDS-PAGE and other biochemical reactions. The recombinant lipase was found to have a molecular mass of 29 kDa and exhibited lipase activity when Tween 80 was used as the substrate. The purified enzyme showed maximum activity at pH 5.0 and at 80°C. The recombinant lipase was used for the transesterification of canola oil and waste oil. The enzyme retains 50% of its activity at 90°C for 30 minutes. It is also able to retain 20% of its activity even at 100 °C for 20 minutes. These properties of the obtained new recombinant thermostable lipase make it promising as a biocatalyst for industrial processes.

  15. Effects of emulsion droplet sizes on the crystallisation of milk fat.

    Science.gov (United States)

    Truong, Tuyen; Bansal, Nidhi; Sharma, Ranjan; Palmer, Martin; Bhandari, Bhesh

    2014-02-15

    The crystallisation properties of milk fat emulsions containing dairy-based ingredients as functions of emulsion droplet size, cooling rate, and emulsifier type were investigated using a differential scanning calorimeter (DSC). Anhydrous milk fat and its fractions (stearin and olein) were emulsified with whey protein concentrate, sodium caseinate, and Tween80 by homogenisation to produce emulsions in various size ranges (0.13-3.10 μm). Particle size, cooling rate, and types of emulsifier all had an influence on the crystallisation properties of fat in the emulsions. In general, the crystallisation temperature of emulsified fats decreased with decreasing average droplet size and was of an exponent function of size, indicating that the influence of particle size on crystallisation temperature is more pronounced in the sub-micron range. This particle size effect was also verified by electron microscopy. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Bacteriocinogenic Lactococcus lactis subsp. lactis DF04Mi isolated from goat milk: Characterization of the bacteriocin

    Science.gov (United States)

    Furtado, Danielle N.; Todorov, Svetoslav D.; Landgraf, Mariza; Destro, Maria T.; Franco, Bernadette D.G.M.

    2014-01-01

    Lactic acid bacteria capable of producing bacteriocins and presenting probiotic potential open innovative technological applications in the dairy industry. In this study, a bacteriocinogenic strain (Lactococcus lactis subsp. lactis DF4Mi) was isolated from goat milk, and studied for its antimicrobial activity. The bacteriocin presented a broad spectrum of activity, was sensitive to proteolytic enzymes, resistant to heat and pH extremes, and not affected by the presence of SDS, Tween 20, Tween 80, EDTA or NaCl. Bacteriocin production was dependent on the components of the culture media, especially nitrogen source and salts. When tested by PCR, the bacteriocin gene presented 100% homology to nisin Z gene. These properties indicate that this L. lactis subsp. lactis DF4Mi can be used for enhancement of dairy foods safety and quality. PMID:25763065

  17. Phytase Production and Development of an Ideal Dephytinization Process for Amelioration of Food Nutrition Using Microbial Phytases.

    Science.gov (United States)

    Jain, Jinender; Singh, Bijender

    2017-04-01

    Development of an ideal process for reduction of food phytates using microbial phytases is a demanding task by all food and feed industries all over the world. Phytase production by Bacillus subtilis subsp. subtilis JJBS250 isolated from soil sample was optimized in submerged fermentation using statistical tools. Among all the culture variables tested, sucrose, sodium phytate and Tween-80 were identified as the most significant variables using the Placket-Burman design. Further optimization of these variables resulted in a 6.79-fold improvement in phytase production (7170 U/L) as compared to unoptimized medium. Supplementation of microbial phytases (fungal and bacterial) resulted in improved bioavailability of nutritional components with the concomitant liberation of inorganic phosphorus, reducing sugar, soluble protein and amino acids, thus mitigating anti-nutritional properties of phytic acid.

  18. Laser mutagenesis and producing cellulase condition optimization of Trichoderma virid protoplast

    International Nuclear Information System (INIS)

    Chen Shuli; Zhang Qin; Han Jingjing; Lv Jiangtao; Wang Shilong; Yao Side

    2009-01-01

    The protoplast of Trichoderma virid CICC13038 was mutated using Nd:YAG laser of 266 nm light. And a high-cellulase producing strain JG13 was bred by screening with cellulose microcrystalline. Under the condition of 28 degree C, 180 rpm and 72 h of fermentation time, optimal conditions for the celluase ferment by orthogonal experiment were: 2% bran as the carbon source, 1% (NH 4 ) 2 SO 4 as the nitrogen source, 0.5% Tween-80 as a enzyme-promoting agent,and 25 mL of medium volume in a 250 mL bottle. The cellulase activity of the mutant reached 35.68 U/mL, 25.76% higher than that of the original strain under the same conditions. The mutant JG13 has a great potential in industrial production. And it also can be used as the original strain for further mutagenesis to get the strain of higher cellulase activity. (authors)

  19. Combined effect of radiation and environmental contaminants on DNA repair mechanisms

    International Nuclear Information System (INIS)

    Altmann, H.

    1975-11-01

    Investigations on the influence of various environmental contamination agents on DNA repair (in combination with irradiation) were reviewed. The agents tested were: detergents (Tween 80, Nonidel P40, Cremophor), aflatoxin B 1 , furocumarines, drugs (indometacin, cyclophosphamide, vincristine, vinblastine, procarbacine), fluorides, irradiated food constituents, food additives (saccharin), metal ions (Cd, Hg), pesticides (2,4,5-trichlorophenoxyethanol) and infective agents (mycoplasmas). Most of the tests were carried out in vitro with γ-irradiated mouse spleen cells. The detergents and aflatoxin were tested also on E. coli, and irradiated glucose solutions were tested in vivo on Swiss albino mice injected with Salmonella typhimurium TA 1530. Most of the tested agents showed some kind of inhibitory or mutagenic effect. The experiments and results are explained briefly with references to earlier investigations

  20. A new asymmetric diamide from the seed cake of Jatropha curcas L.

    Science.gov (United States)

    Yao, Licheng; Han, Changri; Chen, Guangying; Song, Xiaoping; Chang, Yonghui; Zang, Wenxia

    2012-12-01

    A new asymmetric diamide (E)-N-(3-acetamidopropyl)-cinnamamide named curcamide (1) has been isolated from the ethanol extract of the seed cake of Jatropha curcas L. along with 7 known compounds identified as isoamericanin (2), isoprincepin (3), caffeoylaldehyde (4), isoferulaldehyde (5), glycerol monooleate (6), syringaldehyde (7), and β-ethyl-d-glucopyranoside (8). The synthesis and antibacterial activity of the new compound have been also studied. Copyright © 2012 Elsevier B.V. All rights reserved.

  1. Biocompatible and Biomimetic Self-Assembly of Functional Nanostructures

    Science.gov (United States)

    2010-02-28

    evaporation induced self-assembly of aqueous silica precursors with a biologically compatible surfactant, glycerol monooleate ( GMO ) via dip-coating...film is first deposited, it has a relatively low contact angle with water and remains in a semi-solid state. Upon exposure to UV/ozone, the GMO begins...Figure 8. A) Water contact angle of a GMO -templated silica film as a function of UV light and ozone exposure time, B) Localization of fluorescently

  2. Self-nanoemulsifying drug delivery system for enhanced bioavailability and improved hepatoprotective activity of biphenyl dimethyl dicarboxylate.

    Science.gov (United States)

    El-Laithy, Hanan M

    2008-07-01

    Biphenyl Dimethyl Dicarboxylate (BDD) is insoluble in aqueous solution and the bioavailability after oral administration is low. Self-nanoemulsifying drug delivery system (SNEDDS) containing BDD has been successfully prepared using carefully selected ingredients which are less affected by pH and ionic strength changes to improve its bioavailability. SNEDDS is an isotropic mixture of lipid, surfactant, and cosurfactant which are spontaneously emulsified in aqueous medium under gentle digestive motility in the gastrointestinal tract. Pseudo ternary phase diagrams composed of various excipients were plotted to identify self -nano -emulsifying area. Droplet size changes upon dilution with aqueous media and in vitro release of BDD from SNEDDS in 0.1N HCl and phosphate buffer (pH 7.4) were studied and compared with commercial chinese pilules and Pennel capsules. The hepatoprotective activity upon oral administration of SNEDDS against carbon tetrachloride-induced oxidative stress in albino rats was assessed by measuring biochemical parameters like serum glutamic oxalacetate transaminase (SGOT), serum glutamic pyruvate transaminase (SGPT) and lactate dehydrogenase (LDH). Results showed that using a proper ratio of Tween 80 to Transcutol as surfactant and co-surfactant respectively and Miglyol 812 as oil to surfactants mixture resulted in production of infinitely diluted formulations in nano droplet size range. BDD self nano emulsified formula composed of 20% Miglyol 812, 60% Tween 80 and 20% Transcutol released 99% of the drug very rapidly within 10-15 minutes regardless of the pH condition. The oral absorption and bioavailability of BDD self nano emulsified formula in albino rats were significantly enhanced (P<0.01) with an average improvement of 1.7 and 6-folds that of commercial chinese pilules and Pennel capsules respectively. This improvement was also confirmed histopathologically in chemically injured rats and by the significant decrease in elevated liver enzymes

  3. Solubilization and mineralization of polycyclic aromatic hydrocarbons by Pseudomonas putida in the presence of surfactant

    International Nuclear Information System (INIS)

    Doong Rueyan; Lei Wengang

    2003-01-01

    The solubilization and mineralization of polycyclic aromatic hydrocarbons (PAHs) in a soil system amended with different surfactants was examined. Mineralization experiments were conducted with the addition of [ 14 C]pyrene. An inoculum of the PAH-degrading microorganism, Pseudomonas putida, was investigated for its sensitivity towards four non-ionic and one anionic surfactants with different polyoxyethylene (POE) chain lengths. The addition of surfactant was found to enhance the bioavailability of naphthalene, phenanthrene and pyrene with efficiencies ranging from 21.1 to 60.6%, 33.3 to 62.8% and 26.8 to 70.9%, respectively. The enhanced efficiency followed the order of Brij 30, Triton X-100, Tween 80, and Brij 35, which is correlated with the polyoxyethylene chain of the surfactants. Brij 35 and Tween 80 inhibited the growth of P. putida. However, microorganisms can utilize Triton X-100 and Brij 30 as the sole carbon and energy sources at concentrations above CMC values. In the aqueous system without the addition of surfactants, microorganisms could mineralize [ 14 C]pyrene to 14 CO 2 which corresponds to 28% of mineralization. The addition of surfactants decreased the mineralization rate of pyrene. Also, the fraction of the micellar-phase pyrene that can be directly biodegraded decreased as the concentration of micelle increases. However, the mineralization rate can be enhanced by the amendment of Brij 30 when soil was applied to the cultures. This suggests that biodegradable surfactants can be applicable for increasing the bioavailability and mineralization of PAHs in soil systems

  4. Preparation, characterization and in vitro evaluation of microemulsion of raloxifene hydrochloride.

    Science.gov (United States)

    Golmohammadzadeh, Shiva; Farhadian, Nafiseh; Biriaee, Amir; Dehghani, Faranak; Khameneh, Bahman

    2017-10-01

    Raloxifene hydrochloride (RLX) is a selective estrogen receptor modulator which is orally used for treatment of osteoporosis and prevention of breast cancer. The drug has low aqueous solubility and bioavailability. The aim of the present study is to formulate and characterize oil-in-water microemulsion systems for oral delivery of RLX. To enhance the drug aqueous solubility, microemulsion based on sesame oil was prepared. Sesame oil and Tween 80 were selected as the drug solvent oil and surfactant, respectively. In the first and second formulations, Edible glycerin and Span 80 were applied as co-surfactant, respectively. Pseudo-ternary phase diagrams showed that the best surfactant/co-surfactant ratios in the first and second formulations were 4:1 and 9:1, respectively. The particle size of all free drug-loaded and drug loaded samples were in the range of 31.25 ± 0.3 nm and 60.9 ± 0.1 nm, respectively. Electrical conductivity coefficient and refractive index of all microemulsion samples confirmed the formation of oil-in-water type of microemulsion. In vitro drug release profile showed that after 24 hours, 46% and 63% of the drug released through the first formulation in 0.1% (w/v) Tween 80 in distilled water as a release medium and phosphate buffer solution (PBS) at pH = 5.5, respectively. These values were changed to 57% and 98% for the second formulation. Results confirmed that the proposed microemulsion system containing RLX could improve and control the drug release profile in comparison to conventional dosage form.

  5. [Optimize preparation of compound licorice microemulsion with D-optimal design].

    Science.gov (United States)

    Ma, Shu-Wei; Wang, Yong-Jie; Chen, Cheng; Qiu, Yue; Wu, Qing

    2018-03-01

    In order to increase the solubility of essential oil in compound licorice microemulsion and improve the efficacy of the decoction for treating chronic eczema, this experiment intends to prepare the decoction into microemulsion. The essential oil was used as the oil phase of the microemulsion and the extract was used as the water phase. Then the microemulsion area and maximum ratio of water capacity was obtained by plotting pseudo-ternary phase diagram, to determine the appropriate types of surfactant and cosurfactant, and Km value-the mass ratio between surfactant and cosurfactant. With particle size and skin retention of active ingredients as the index, microemulsion prescription was optimized by D-optimal design method, to investigate the in vitro release behavior of the optimized prescription. The results showed that the microemulsion was optimal with tween-80 as the surfactant and anhydrous ethanol as the cosurfactant. When the Km value was 1, the area of the microemulsion region was largest while when the concentration of extract was 0.5 g·mL⁻¹, it had lowest effect on the particle size distribution of microemulsion. The final optimized formulation was as follows: 9.4% tween-80, 9.4% anhydrous ethanol, 1.0% peppermint oil and 80.2% 0.5 g·mL⁻¹ extract. The microemulsion prepared under these conditions had a small viscosity, good stability and high skin retention of drug; in vitro release experiment showed that microemulsion had a sustained-release effect on glycyrrhizic acid and liquiritin, basically achieving the expected purpose of the project. Copyright© by the Chinese Pharmaceutical Association.

  6. Enzymatic Degradation of Dynasan 114 SLN - Effect of Surfactants and Particle Size

    International Nuclear Information System (INIS)

    Olbrich, Carsten; Kayser, Oliver; Mueller, Rainer Helmut

    2002-01-01

    The degradation velocity of solid lipid nanoparticles (SLN) is - apart from drug diffusion - an important parameter determining drug release in vivo. To assess the effect of stabilizers systematically, Dynasan 114 SLN were produced with ionic surfactants (e.g. cholic acid sodium salt (NaCh), sodium dodecyl sulfate (SDS), cetylpyridiniumchloride (CPC)) and steric stabilizers (Tween 80, Poloxamer 188, 407 and Poloxamine 908) including a mixture of cholic acid sodium salt and Poloxamer 407. In addition, the size effects were investigated. The degradation velocity was measured using an in vitro lipase assay. SLN stabilized with lecithin and NaCh showed the fastest, Tween 80 the intermediate and the high molecular weight Poloxamer 407 the slowest degradation. Size effects were less pronounced for fast degrading particles (e.g. those stabilized with NaCh). No difference in the size range of 180-300-nm was observed, but a distinctly slower degradation of 800-nm SLN could be detected. For slowly degrading particles, more pronounced size effects were found. Size effects are more difficult to assess when the PCS diameters are similar, but small fractions of micrometer particles are present, besides the nanometer bulk population. The measured FFA formation is then a superposition of particles degrading at different speeds due to differences in the shape of the size distribution. Admixing of Poloxamer to NaCh had no delaying effect on the degradation of the Dynasan 114 SLN, indicating an influence of the nature of the lipid matrix that is affecting the stabilizers affinity to and anchoring onto the SLN surface

  7. Preparation of factor VII concentrate using CNBr-activated Sepharose 4B immunoaffinity chromatography.

    Science.gov (United States)

    Mousavi Hosseini, Kamran; Nasiri, Saleh

    2015-01-01

    Factor VII concentrates are used in patients with congenital or acquired factor VII deficiency or treatment of hemophilia patients with inhibitors. In this research, immunoaffinity chromatography was used to purify factor VII from prothrombin complex (Prothrombin- Proconvertin-Stuart Factor-Antihemophilic Factor B or PPSB) which contains coagulation factors II, VII, IX and X. The aim of this study was to improve purity, safety and tolerability as a highly purified factor VII concentrate. PPSB was prepared using DEAE-Sephadex and was used as the starting material for purification of coagulation factor VII. Prothrombin complex was treated by solvent/detergent at 24°C for 6 h with constant stirring. The mixture of PPSB in the PBS buffer was filtered and then chromatographed using CNBr-activated Sepharose 4B coupled with specific antibody. Factors II, IX, VII, X and VIIa were assayed on the fractions. Fractions of 48-50 were pooled and lyophilized as a factor VII concentrate. Agarose gel electrophoresis was performed and Tween 80 was measured in the factor VII concentrate. Specific activity of factor VII concentrate increased from 0.16 to 55.6 with a purificationfold of 347.5 and the amount of activated factor VII (FVIIa) was found higher than PPSB (4.4-fold). RESULTS of electrophoresis on agarose gel indicated higher purity of Factor VII compared to PPSB; these finding revealed that factor VII migrated as alpha-2 proteins. In order to improve viral safety, solvent-detergent treatment was applied prior to further purification and nearly complete elimination of tween 80 (2 μg/ml). It was concluded that immuonoaffinity chromatography using CNBr-activated Sepharose 4B can be a suitable choice for large-scale production of factor VII concentrate with higher purity, safety and activated factor VII.

  8. Impact of bacterial and fungal processes on {sup 14}C-hexadecane mineralisation in weathered hydrocarbon contaminated soil

    Energy Technology Data Exchange (ETDEWEB)

    Adetutu, Eric M.; Ball, Andy S. [School of Biological Sciences, Flinders University, Adelaide, South Australia, 5001 (Australia); Weber, John; Aleer, Samuel; Dandie, Catherine E. [Centre for Environmental Risk Assessment and Remediation (CERAR), University of South Australia, Mawson Lakes Campus, Adelaide, South Australia, 5095 (Australia); Cooperative Research Centre for Contamination Assessment and Remediation of the Environment (CRC CARE), Mawson Lakes, Adelaide, South Australia, 5095 (Australia); Juhasz, Albert L., E-mail: Albert.Juhasz@unisa.edu.au [Centre for Environmental Risk Assessment and Remediation (CERAR), University of South Australia, Mawson Lakes Campus, Adelaide, South Australia, 5095 (Australia); Cooperative Research Centre for Contamination Assessment and Remediation of the Environment (CRC CARE), Mawson Lakes, Adelaide, South Australia, 5095 (Australia)

    2012-01-01

    In this study, the impact of bacterial and fungal processes on {sup 14}C-hexadecane mineralisation was investigated in weathered hydrocarbon contaminated soil. The extent of {sup 14}C-hexadecane mineralisation varied depending on the bioremediation strategy employed. Under enhanced natural attenuation conditions, {sup 14}C-hexadecane mineralisation after 98 days was 8.5 {+-} 3.7% compared to < 1.2% without nitrogen and phosphorus additions. {sup 14}C-hexadecane mineralisation was further enhanced through Tween 80 amendments (28.9 {+-} 2.4%) which also promoted the growth of a Phanerochaete chyrsosporium fungal mat. Although fungal growth in weathered hydrocarbon contaminated soil could be promoted through supplementing additional carbon sources (Tween 80, sawdust, compost, pea straw), fungal {sup 14}C-hexadecane mineralisation was negligible when sodium azide was added to soil microcosms to inhibit bacterial activity. In contrast, when fungal activity was inhibited through nystatin additions, {sup 14}C-hexadecane mineralisation ranged from 6.5 {+-} 0.2 to 35.8 {+-} 3.8% after 98 days depending on the supplied amendment. Bacteria inhibition with sodium azide resulted in a reduction in bacterial diversity (33-37%) compared to microcosms supplemented with nystatin or microcosms without inhibitory supplements. However, alkB bacterial groups were undetected in sodium azide supplemented microcosms, highlighting the important role of this bacterial group in {sup 14}C-hexadecane mineralisation. - Highlights: Black-Right-Pointing-Pointer The roles of different microbial groups in hydrocarbon mineralisation was assessed. Black-Right-Pointing-Pointer Inhibiting fungal growth did not affect {sup 14}C-hexadecane mineralisation. Black-Right-Pointing-Pointer Inhibiting bacterial growth resulted in negligible {sup 14}C-hexadecane mineralisation. Black-Right-Pointing-Pointer alkB bacterial groups were undetected in sodium azide supplemented microcosms. Black

  9. Impact of bacterial and fungal processes on 14C-hexadecane mineralisation in weathered hydrocarbon contaminated soil

    International Nuclear Information System (INIS)

    Adetutu, Eric M.; Ball, Andy S.; Weber, John; Aleer, Samuel; Dandie, Catherine E.; Juhasz, Albert L.

    2012-01-01

    In this study, the impact of bacterial and fungal processes on 14 C-hexadecane mineralisation was investigated in weathered hydrocarbon contaminated soil. The extent of 14 C-hexadecane mineralisation varied depending on the bioremediation strategy employed. Under enhanced natural attenuation conditions, 14 C-hexadecane mineralisation after 98 days was 8.5 ± 3.7% compared to 14 C-hexadecane mineralisation was further enhanced through Tween 80 amendments (28.9 ± 2.4%) which also promoted the growth of a Phanerochaete chyrsosporium fungal mat. Although fungal growth in weathered hydrocarbon contaminated soil could be promoted through supplementing additional carbon sources (Tween 80, sawdust, compost, pea straw), fungal 14 C-hexadecane mineralisation was negligible when sodium azide was added to soil microcosms to inhibit bacterial activity. In contrast, when fungal activity was inhibited through nystatin additions, 14 C-hexadecane mineralisation ranged from 6.5 ± 0.2 to 35.8 ± 3.8% after 98 days depending on the supplied amendment. Bacteria inhibition with sodium azide resulted in a reduction in bacterial diversity (33–37%) compared to microcosms supplemented with nystatin or microcosms without inhibitory supplements. However, alkB bacterial groups were undetected in sodium azide supplemented microcosms, highlighting the important role of this bacterial group in 14 C-hexadecane mineralisation. - Highlights: ► The roles of different microbial groups in hydrocarbon mineralisation was assessed. ► Inhibiting fungal growth did not affect 14 C-hexadecane mineralisation. ► Inhibiting bacterial growth resulted in negligible 14 C-hexadecane mineralisation. ► alkB bacterial groups were undetected in sodium azide supplemented microcosms. ► The importance of alkB groups in 14 C-hexadecane mineralisation was highlighted.

  10. Application of Taguchi Design and Response Surface Methodology for Improving Conversion of Isoeugenol into Vanillin by Resting Cells of Psychrobacter sp. CSW4.

    Science.gov (United States)

    Ashengroph, Morahem; Nahvi, Iraj; Amini, Jahanshir

    2013-01-01

    For all industrial processes, modelling, optimisation and control are the keys to enhance productivity and ensure product quality. In the current study, the optimization of process parameters for improving the conversion of isoeugenol to vanillin by Psychrobacter sp. CSW4 was investigated by means of Taguchi approach and Box-Behnken statistical design under resting cell conditions. Taguchi design was employed for screening the significant variables in the bioconversion medium. Sequentially, Box-Behnken design experiments under Response Surface Methodology (RSM) was used for further optimization. Four factors (isoeugenol, NaCl, biomass and tween 80 initial concentrations), which have significant effects on vanillin yield, were selected from ten variables by Taguchi experimental design. With the regression coefficient analysis in the Box-Behnken design, a relationship between vanillin production and four significant variables was obtained, and the optimum levels of the four variables were as follows: initial isoeugenol concentration 6.5 g/L, initial tween 80 concentration 0.89 g/L, initial NaCl concentration 113.2 g/L and initial biomass concentration 6.27 g/L. Under these optimized conditions, the maximum predicted concentration of vanillin was 2.25 g/L. These optimized values of the factors were validated in a triplicate shaking flask study and an average of 2.19 g/L for vanillin, which corresponded to a molar yield 36.3%, after a 24 h bioconversion was obtained. The present work is the first one reporting the application of Taguchi design and Response surface methodology for optimizing bioconversion of isoeugenol into vanillin under resting cell conditions.

  11. Ibuprofen nanocrystals developed by 22 factorial design experiment: A new approach for poorly water-soluble drugs

    Directory of Open Access Journals (Sweden)

    A.R. Fernandes

    2017-12-01

    Full Text Available The reduction of the particle size of drugs of pharmaceutical interest down to the nano-sized range has dramatically changed their physicochemical properties. The greatest disadvantage of nanocrystals is their inherent instability, due to the risk of crystal growth. Thus, the selection of an appropriate stabilizer is crucial to obtain long-term physicochemically stable nanocrystals. High pressure homogenization has enormous advantages, including the possibility of scaling up, lack of organic solvents and the production of small particles diameter with low polydispersity index. The sequential use of high shear homogenization followed by high pressure homogenization, can modulate nanoparticles’ size for different administration routes. The present study focuses on the optimization of the production process of two formulations composed of different surfactants produced by High Shear Homogenization followed by hot High Pressure Homogenization. To build up the surface response charts, a 22 full factorial design experiment, based on 2 independent variables, was used to develop optimized formulations. The effects of the production process on the mean particle size and polydispersity index were evaluated. The best ibuprofen nanocrystal formulations were obtained using 0.20% Tween 80 and 1.20% PVP K30 (F1 and 0.20% Tween 80 and 1.20% Span 80 (F2. The estimation of the long-term stability of the aqueous suspensions of ibuprofen nanocrystals was studied using the LUMISizer. The calculated instability index suggests that F1 was more stable when stored at 4 °C and 22 °C, whereas F2 was shown to be more stable when freshly prepared.

  12. Non-ionic Surfactants and Non-Catalytic Protein Treatment on Enzymatic Hydrolysis of Pretreated Creeping Wild Ryegrass

    Science.gov (United States)

    Zheng, Yi; Pan, Zhongli; Zhang, Ruihong; Wang, Donghai; Jenkins, Bryan

    Our previous research has shown that saline Creeping Wild Ryegrass (CWR), Leymus triticoides, has a great potential to be used for bioethanol production because of its high fermentable sugar yield, up to 85% cellulose conversion of pretreated CWR. However, the high cost of enzyme is still one of the obstacles making large-scale lignocellulosic bioethanol production economically difficult. It is desirable to use reduced enzyme loading to produce fermentable sugars with high yield and low cost. To reduce the enzyme loading, the effect of addition of non-ionic surfactants and non-catalytic protein on the enzymatic hydrolysis of pretreated CWR was investigated in this study. Tween 20, Tween 80, and bovine serum albumin (BSA) were used as additives to improve the enzymatic hydrolysis of dilute sulfuric-acid-pretreated CWR. Under the loading of 0.1 g additives/g dry solid, Tween 20 was the most effective additive, followed by Tween 80 and BSA. With the addition of Tween 20 mixed with cellulase loading of 15 FPU/g cellulose, the cellulose conversion increased 14% (from 75 to 89%), which was similar to that with cellulase loading of 30 FPU/g cellulose and without additive addition. The results of cellulase and BSA adsorption on the Avicel PH101, pretreated CWR, and lignaceous residue of pretreated CWR support the theory that the primary mechanism behind the additives is prevention of non-productive adsorption of enzymes on lignaceous material of pretreated CWR. The addition of additives could be a promising technology to improve the enzymatic hydrolysis by reducing the enzyme activity loss caused by non-productive adsorption.

  13. Curcumin-loaded ultradeformable nanovesicles as a potential delivery system for breast cancer therapy.

    Science.gov (United States)

    Abdel-Hafez, Salma M; Hathout, Rania M; Sammour, Omaima A

    2018-07-01

    In the current study, the transdermal route has been investigated to deliver the poorly bioavailable drug; curcumin into the systemic circulation, aiming to target both superficial and subcutaneous tumors such as the breast tumors. Accordingly, different colloidal carriers viz. ultradeformable nanovesicles comprising various penetration enhancers were exploited. Curcumin-loaded deformable vesicles were prepared by the thin film hydration method followed by extrusion. Sodium cholate and Tween 80 were set as standard edge activators and Labrasol, Transcutol, limonene and oleic acid were the penetration enhancers that were evaluated for their efficacy in skin permeation. The particle size and zeta potential of the prepared vesicles were significantly affected by the type of surfactant/penetration enhancer. The polydispersity measurements showed uniform particle size distribution indicating the sufficiency of the extrusion cycles performed. Curcumin, as a hydrophobic molecule, was well accommodated within the lipid bilayers of the prepared vesicles with entrapment efficiency (EE%) percentages and drug loading percentages (DL%) as high as 93.91% and 7.04%, respectively. The ex-vivo permeation studies were performed on male albino mice skin mounted on Franz diffusion cells. Oleic acid and Transcutol exhibited comparable fluxes to sodium cholate and Tween 80 (∼16 μg cm -2  h -1 ), whereas the fluxes of Labrasol and limonene were significantly lower. Cytotoxicity studies were performed using MTT assay on human breast cancer cell lines (MCF-7 cells). The results of the MTT assay demonstrated that oleic acid ultradeformable nanovesicles scored an IC 50 of 20 μg/ml which introduce these new curcumin-loaded nanovesicles as a successful delivery system for breast cancer therapy. Copyright © 2018 Elsevier B.V. All rights reserved.

  14. Optimization of phytase production by Penicillium purpurogenum GE1 under solid state fermentation by using Box-Behnken design.

    Science.gov (United States)

    Awad, Ghada E A; Helal, Mohamed M I; Danial, Enas N; Esawy, Mona A

    2014-01-01

    Phytase production by Penicillium purpurogenum GE1 isolated from soil around bean root nodules was investigated by solid state fermentation (SSF) using mixed substrates consisted of corn cob and corn bran. The SSF conditions were optimized by using one-variable-at-a-time strategy. The optimum conditions for phytase production were at 27 °C, pH 8 and 66% moisture content. The study of different carbon and nitrogen sources revealed that glucose and peptone registered the highest enzyme productivity (92 ± 5.6 U/g ds, 125 ± 4.9 U/g ds). Among different surfactants, maximum phytase productivity was observed with Tween 80 at 0.001 concentrations (170 ± 4.2 U/g ds). A Box-Behnken design was employed to investigate the optimization of the most significant variables affecting the enzyme production. Maximal phytase production was detected after the addition of (g/5 g ds): 0.75 glucose, 0.375 peptone and 0, 01 tween 80. This result represented an improvement in phytase production of 2.6 folds when compared to that previously obtained using the basal medium under the same cultivation conditions. The generated model was found to be very adequate for phytase production (90% accuracy) as the experimental value was 444 ± 3.5 U/g ds compared to 401 U/g ds for the predicted value. In brief, the production of phytase using corn cob and corn bran is a novel and cheap way for the production of this important enzyme and opens a new way for researchers to discover and explore this arena.

  15. Toxicological evaluation of ethanolic extract of Anacyclus pyrethrum in albino wistar rats

    Directory of Open Access Journals (Sweden)

    Kuttan Sujith

    2017-12-01

    Full Text Available Objective: To evaluate the sub chronic toxicity of ethanolic extract of Anacyclus pyrethrum (A. pyrethrum in albino wistar rats. Methods: In sub chronic toxicity study ethanolic extract of A. pyrethrum prepared in 2%v/v tween 80 was administered to rats at the dose of 1 000 mg/kg per day for 90 days by oral gavage. A control group received only 2%v/v tween 80. During study period the rats were observed for changes body weight. At the end of dosing period rats relative organ weight of the liver, kidney, brain, lungs and spleen in rats treated with A. pyrethrum extract and control group were examined and also rats were subjected to haematological, biochemical and histopathological examination. Results: The administration of ethanolic extract of A. pyrethrum had no effect on body weight, growth and survival. There was no significant difference in the relative organ weight of the liver, kidney, brain, lungs and spleen in rats treated with A. pyrethrum extract and control group. In the present study, all the haematological and biochemical parameters at the end of dosing and observation period did not reveal difference between drug treated and control groups. Studies on histopathological examination of vital organs showed normal architecture suggesting no evidence of pathological lesions. Conclusions: The studies on sub chronic toxicity reveals that no mortalities or evidence of adverse effects on oral administration of extract. The findngs of the study indicate that ethanolic extract of A. pyrethrum had no treatment related toxicological abnormalities and can be considerd as safe for long-term treatment.

  16. A Direct Comparison of Anti-ulcer Effects of Coenzyme Q10 and Vitamin C on Indomethacin-induced Gastric Ulcer in Rat: A Controlled Experimental Study

    Directory of Open Access Journals (Sweden)

    2013-08-01

    Full Text Available Introduction: Indomethacin increases generation of mitochondrial reactive oxygen species (ROS which have a crucial role in the indomethacin-induced gastric ulcer. Coenzyme Q10 has an antioxidant activity on mitochondria and cell membranes and protects lipids from oxidation and is essential for stabilizing biological membranes. Superoxide dismutase (SOD acts as one of the defense mechanisms against free radicals. When the generation of ROS overwhelms, the antioxidant defense, lipid peroxiation of cell membrane occurs and cause cell damage. Materials and Methods: Male adult Wistar rats were divided into A and B groups. The rats in group A were then further divided into three subgroups of 6 animals each and received one of the following treatments: Animals in the first subgroup received saline. Animals in the second subgroup received saline and indomethacin. Animals in the third subgroup received vitamin C and indomethacin. The rats in group B were also further divided into 3 subgroups of 6 rats each and treated with one of the following treatments: Animals in first subgroup received 1% Tween 80 as vehicle. Animals In second subgroup received 1% Tween 80 and indomethacin. Animals in third subgroup received CoQ10 and indomethacin. Four hours after the last treatment, animals were killed and the stomachs removed were cut and gastric mucosal lesions were examined. Ulcer indexes were determined and SOD activity measured in plasma                                                             Results: Pretreatment with both vitamin C and coenzyme Q10 was associated with attenuation of ulcer index and increased SOD activity compared with animals treated with indomethacin alone (P

  17. Synthesis, characterization, release kinetics and toxicity profile of drug-loaded starch nanoparticles.

    Science.gov (United States)

    El-Naggar, Mehrez E; El-Rafie, M H; El-sheikh, M A; El-Feky, Gina S; Hebeish, A

    2015-11-01

    The current research work focuses on the medical application of the cost-effective cross-linked starch nanoparticles, for the transdermal delivery using Diclofenac sodium (DS) as a model drug. The prepared DS-cross-linked starch nanoparticles were synthesized using nanoprecipitation technique at different concentrations of sodium tripolyphosphate (STPP) in the presence of Tween 80 as a surfactant. The resultant cross-linked starch nanoparticles loaded with DS were characterized using world-class facilities such as TEM, DLS, FT-IR, XRD, and DSc. The efficiency of DS loading was also evaluated via entrapment efficiency as well as in vitro release and histopathological study on rat skin. The optimum nanoparticles formulation selected by the JMP(®) software was the formula that composed of 5% maize starch, 57.7mg DS and 0.5% STPP and 0.4% Tween 80, with particle diameter of about 21.04nm, polydispersity index of 0.2 and zeta potential of -35.3mV. It is also worth noting that this selected formula shows an average entrapment efficiency of 95.01 and sustained DS release up to 6h. The histophathological studies using the best formula on rat skin advocate the use of designed transdermal DS loaded cross-linked starch nanoparticles as it is safe and non-irritant to rat skin. The overall results indicate that, the starch nanoparticles could be considered as a good carrier for DS drug regarding the enhancement in its controlled release and successful permeation, thus, offering a promising nanoparticulate system for the transdermal delivery non-steroidal anti-inflammatory drug (NSAID). Copyright © 2015 Elsevier B.V. All rights reserved.

  18. Removal of PAHs from contaminated clayey soil by means of electro-osmosis

    KAUST Repository

    Lima, Ana T.

    2011-06-01

    The removal of polycyclic aromatic hydrocarbons (PAHs) from clayey soils is an intricate task. The low porosity of compacted clayey soil hinders bacterial activity and makes convective removal by hydraulic flow impossible. Electro-osmosis is a process that has been used for the mobilization and cleanup of contaminants in clayey soils with varying successes. The present study focuses on the remediation of a contaminated peaty clay soil, located in Olst - the Netherlands, by means of electro-osmosis. The soil was originally contaminated by an asphalt production plant, active from 1903 to 1983, and presents high levels of all 16 priority PAHs indicated by the US Environmental Protection Agency (EPA). Such a long contact times of PAH with the soil (≥100 years) presents a unique study material with well established solid/liquid contaminant partitioning equilibrium, preferable to artificially spiked soil. A batch of 6 electro-osmosis laboratory experiments was carried out to study the removal of 16 PAHs through electro-osmosis. In these experiments, water and a surfactant (Tween 80) were used to enhance the PAH desorption. The electro-osmotic conductivities ranged from 2.88 × 10-10 to a substantial 1.19 × 10-7 m2 V-1 s -1 when applying a current density of 0.005-0.127 A m-2. Electro-osmosis was expected to occur towards the cathode, because of natural soil characteristics (negative zeta potential), but presented scattered directions. The use of reference electrodes proved to be very effective to the prediction of the flow direction. Finally, the addition of Tween 80 as a surfactant enhanced PAH removal up to 30% of the total PAH content of the soil in 9 days. © 2011 Elsevier B.V.

  19. Acute toxicity of functionalized single wall carbon nanotubes: A biochemical, histopathologic and proteomics approach.

    Science.gov (United States)

    Ahmadi, Homa; Ramezani, Mohammad; Yazdian-Robati, Rezvan; Behnam, Behzad; Razavi Azarkhiavi, Kamal; Hashem Nia, Azadeh; Mokhtarzadeh, Ahad; Matbou Riahi, Maryam; Razavi, Bibi Marjan; Abnous, Khalil

    2017-09-25

    Recently carbon nanotubes (CNTs) showed promising potentials in different biomedical applications but their safe use in humans and probable toxicities are still challenging. The aim of this study was to determine the acute toxicity of functionalized single walled carbon nanotubes (SWCNTs). In this project, PEGylated and Tween functionalized SWCNTs were prepared. BALB/c mice were randomly divided into nine groups, including PEGylated SWCNTs (75,150μg/mouse) and PEG, Tween80 suspended SWCNTs, Tween 80 and a control group (intact mice). One or 7 days after intravenous injection, the mice were killed and serum and livers were collected. The oxidative stress markers, biochemical and histopathological changes were studied. Subsequently, proteomics approach was used to investigate the alterations of protein expression profiles in the liver. Results showed that there were not any significant differences in malondealdehyde (MDA), glutathione (GSH) levels and biochemical enzymes (ALT and AST) between groups, while the histopathological observations of livers showed some injuries. The results of proteomics analysis revealed indolethylamine N-Methyltransferase (INMT), glycine N-Methyltransferase (GNMT), selenium binding protein (Selenbp), thioredoxin peroxidase (TPx), TNF receptor associated protein 1(Trap1), peroxiredoxin-6 (Prdx6), electron transport flavoprotein (Etf-α), regucalcin (Rgn) and ATP5b proteins were differentially expressed in functionalized SWCNTs groups. Western blot analyses confirmed that the changes in Prdx6 were consistent with 2-DE gel analysis. In summary, acute toxicological study on two functionalized SWCNTs did not show any significant toxicity at selected doses. Proteomics analysis also showed that following exposure to functionalized SWCNTs, the expression of some proteins with antioxidant activity and detoxifying properties were increased in liver tissue. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. SIFAT ORGANOLEPTIK, SIFAT FISIK, SERTA KADAR β-KAROTEN DAN α-TOKOFEROL EMULSI BUAH MERAH (Pandanus conoideus (The Organoleptic Properties, Physical Properties, and the Level of β-carotene and α-tocopherol of Red Fruit (Pandanus conoideus Oil Emulsion

    Directory of Open Access Journals (Sweden)

    Zita Letviany Sarungallo

    2014-07-01

    Full Text Available The objective of this study was to determine the organoleptic and physical properties, and the level of β-carotene and α-tocopherol of red fruit (Pandanus conoideus emulsion. The emulsion was made by mixing red fruit oil and water in ratio of 7:3, with addition of some emulsifiers as treatments, namely 0.20% of CMC (carboxyl methyl cellulose (F0, 0.5% of Tween 80 and 0.2% of CMC  (F1, and 0.5% of Tween 20 and 0.2% of CMC  (F2. Based on the organoleptic evaluation, the most preferred formulation of red fruit emulsion was F1, which have complementary ingredients, namely 0.50% of Tween 80, 0.20% of CMC, 0.06% of sodium benzoate, 0.02% of ethylene diamine tetra acetic acid (EDTA, 1.5% of orange citrus essence, and 15% of sugar. The acceptance scores of the formulation for color, taste, aroma, and texture were 4.5 (like-extremely like, 3.8 (neutral-like, 3.8 (neutral-like, and 4.1 (like, respectively, and the level of viscosity was thick with organoleptic score of 6.1 (thick. Physically, red fruit emulsion has red orange in color, citrus in aroma, sweet in taste, viscous in texture, viscosity 20.5 dPa.s, pH 6.4,  and stability 100% in strorage for 30 days at room temperature.  The content  of β-carotene  and α-tocopherol were 14 mg/kg and 229.4 mg/kg respectively. Keywords: Red fruit (Pandanus conoideus, emulsion, organoleptic and physical properties, β-carotene, α-tocopherol

  1. Conversion of Exogenous Cholesterol into Glycoalkaloids in Potato Shoots, Using Two Methods for Sterol Solubilisation

    Science.gov (United States)

    Petersson, Erik V.; Nahar, Nurun; Dahlin, Paul; Broberg, Anders; Tröger, Rikard; Dutta, Paresh C.; Jonsson, Lisbeth; Sitbon, Folke

    2013-01-01

    Steroidal glycoalkaloids (SGA) are toxic secondary metabolites naturally occurring in the potato, as well as in certain other Solanaceous plant species, such as tomato, eggplant and pepper. To investigate the steroidal origin of SGA biosynthesis, cut potato shoots were fed cholesterol labelled with deuterium (D) in the sterol ring structure (D5- or D6-labelled), or side chain (D7-labelled), and analysed after three or five weeks. The labelled cholesterol and presence of D-labelled SGA were analysed by GC-MS and LC-MS/MS, respectively. When feeding D-labelled cholesterol solubilised in Tween-80, labelled cholesterol in free form became present in both leaves and stems, although the major part was recovered as steryl esters. Minor amounts of D-labelled SGA (α-solanine and α-chaconine) were identified in cholesterol-treated shoots, but not in blank controls, or in shoots fed D6-27-hydroxycholesterol. Solubilising the labelled cholesterol in methyl-β-cyclodextrin instead of Tween-80 increased the levels of labelled SGA up to 100-fold, and about 1 mole% of the labelled cholesterol was recovered as labelled SGA in potato leaves. Both side chain and ring structure D labels were retained in SGA, showing that the entire cholesterol molecule is converted to SGA. However, feeding side chain D7-labelled cholesterol resulted in D5-labelled SGA, indicating that two hydrogen atoms were released during formation of the SGA nitrogen-containing ring system. Feeding with D7-sitosterol did not produce any labelled SGA, indicating that cholesterol is a specific SGA precursor. In conclusion, we have demonstrated a superior performance of methyl-β-cyclodextrin for delivery of cholesterol in plant tissue feeding experiments, and given firm evidence for cholesterol as a specific sterol precursor of SGA in potato. PMID:24349406

  2. Androgen receptor (AR) degradation enhancer ASC-J9® in an FDA-approved formulated solution suppresses castration resistant prostate cancer cell growth.

    Science.gov (United States)

    Cheng, Max A; Chou, Fu-Ju; Wang, Keliang; Yang, Rachel; Ding, Jie; Zhang, Qiaoxia; Li, Gonghui; Yeh, Shuyuan; Xu, Defeng; Chang, Chawnshang

    2018-03-28

    ASC-J9 ® is a recently-developed androgen receptor (AR)-degradation enhancer that effectively suppresses castration resistant prostate cancer (PCa) cell proliferation and invasion. The optimal half maximum inhibitory concentrations (IC 50 ) of ASC-J9 ® at various PCa cell confluences (20%, 50%, and 100%) were assessed via both short-term MTT growth assays and long-term clonogenic proliferation assays. Our results indicate that the IC 50 values for ASC-J9 ® increased with increasing cell confluency. The IC 50 values were significantly decreased in PCa AR-positive cells compared to PCa AR-negative cells or in normal prostate cells. This suggests that ASC-J9 ® may function mainly via targeting the AR-positive PCa cells with limited unwanted side-effects to suppress the surrounding normal prostate cells. Mechanism dissection indicated that ASC-J9 ® might function via altering the apoptosis signals to suppress the PCa AR-negative PC-3 cells. Preclinical studies using multiple in vitro PCa cell lines and an in vivo mouse model with xenografted castration-resistant PCa CWR22Rv1 cells demonstrated that ASC-J9 ® has similar AR degradation effects when dissolved in FDA-approved solvents, including DMSO, PEG-400:Tween-80 (95:5), DMA:Labrasol:Tween-80 (10:45:45), and DMA:Labrasol:Tween-20 (10:45:45). Together, results from preclinical studies suggest a potential new therapy with AR-degradation enhancer ASC-J9 ® may potentially be ready to be used in human clinical trials in order to better suppress PCa at later castration resistant stages. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Investigations of labeling insulin-like growth factor-1 analogue with 188Re

    International Nuclear Information System (INIS)

    Zhang Bin; Wu Yiwei; Fan Wo

    2007-01-01

    Objective: To establish a stable method for labeling insulin-like growth factor-1 analogue (IGF-1A) with 188 Re. Methods: The directly labeling method was adopted. Several labeling conditions were tested, such as the volume of Tween-80, the concentration of SnCl 2 ·2H 2 O, the amount of IGF-1A, and the volume of 188 Re perrhenate. The labeling efficiency was determined from 15 min to 8 h after labeling. The in vitro stability of 188 Re-IGF-1A was analyzed by using human serum or sodium chloride as challenging agent, and the labeling efficiency was determined from 2 to 24 h after added challenging agent. Results: The optimum labeling conditions were 10 μl 0.1% Tween-80, 100 μl SnCl 2 · 2H 2 O (10 mg/ml), 50 μl IGF-1A (2 mg/ml), and 50 μl 188 Re perrhenate, incubated 30 min at room temperature. The labeling efficiency of 188 Re-IGF-1A could reach (94.07 ± 0.32)% and the amount of radiocolloid was (5.50 ± 1.50)%. It was (89.07 ± 0.74)% after incubation for 6 h at room temperature, and was (76.57 ± 9.96)% after incubation for 24 h with human serum. Conclusion: This method of labeling IGF- 1A with 188 Re using SnCl 2 ·2H 2 O is stable and high labeling efficiency can be obtained. (authors)

  4. Optimization and scale-up of fermentation of glucansucrase and branched glucan by Pediococcus pentosaceus CRAG3 using Taguchi methodology in bioreactor

    Directory of Open Access Journals (Sweden)

    RISHIKESH SHUKLA

    2012-01-01

    Full Text Available The present investigation focuses on screening and optimization of media components to enhance glucansucrase and glucan production by Pediococcus pentosaceus CRAG3 at shake-flask and bioreactor level using Taguchi orthogonal array design. A three-level Taguchi orthogonal array layout of L27 (33 was employed, in which six variables were studied for their influence on glucansucrase and glucan production. The results showed that sucrose, K2HPO4 and Tween-80 were the most significant factors to improve glucansucrase production while the glucan production was mostly affected by sucrose, peptone and K2HPO4. The optimized medium composition for maximum glucansucrase and glucan production were: sucrose 3.5% and 5%; yeast extract 0.2% and 2.0%; beef extract 0.5% and 0.5%; peptone 3.0% and 1.0%; K2HPO4 0.2% and 0.2%, and Tween-80 1.0 and 0.1%, respectively. The optimized medium gave 10.1 U/ml and 10.2 U/ml glucansucrase activity while glucan concentrations were 56 mg/ml and 80 mg/ml in shake flask and bioreactor level, respectively which were in good agreement with predicted values (10.1 U/ml and 54.5 mg/ml. The optimized medium gave 2 fold enhancement in enzyme activity and 4 fold increase in glucan concentration as compared to non-optimized medium (4.5 U/ml and 15 mg/ml, respectively at shake flask level.

  5. Enrichment, development, and assessment of Indian basil oil based antiseptic cream formulation utilizing hydrophilic-lipophilic balance approach.

    Science.gov (United States)

    Yadav, Narayan Prasad; Meher, Jaya Gopal; Pandey, Neelam; Luqman, Suaib; Yadav, Kuldeep Singh; Chanda, Debabrata

    2013-01-01

    The present work was aimed to develop an antiseptic cream formulation of Indian basil oil utilizing hydrophilic-lipophilic balance approach. In order to determine the required-hydrophilic lipophilic balance (rHLB) of basil oil, emulsions of basil oil were prepared by phase inversion temperature technique using water, Tween 80, and Span 80. Formulated emulsions were assessed for creaming (BE9; 9.8, BE10; 10.2), droplet size (BE18; 3.22 ± 0.09 μ m), and turbidity (BE18; 86.12 ± 2.1%). To ensure correctness of the applied methodology, rHLB of light liquid paraffin was also determined. After rHLB determination, basil oil creams were prepared with two different combinations of surfactants, namely, GMS : Tween 80 (1 : 3.45) and SLS : GMS (1 : 3.68), and evaluated for in vitro antimicrobial activity, skin irritation test, viscosity and consistency. The rHLB of basil oil and light liquid paraffin were found to be 13.36 ± 0.36 and 11.5 ± 0.35, respectively. Viscosity, and consistency parameters of cream was found to be consistent over 90 days. Cream formulations showed net zone of growth inhibition in the range of 5.0-11.3 mm against bacteria and 4.3-7.6 mm against fungi. Primary irritation index was found to be between 0.38 and1.05. Conclusively stable, consistent, non-irritant, enriched antiseptic basil oil cream formulations were developed utilizing HLB approach.

  6. Mycobacterium sarraceniae sp. nov. and Mycobacterium helvum sp. nov., isolated from the pitcher plant Sarracenia purpurea.

    Science.gov (United States)

    Tran, Phuong M; Dahl, John L

    2016-11-01

    Several fast- to intermediate-growing, acid-fast, scotochromogenic bacteria were isolated from Sarracenia purpurea pitcher waters in Minnesota sphagnum peat bogs. Two strains (DL734T and DL739T) were among these isolates. On the basis of 16S rRNA gene sequences, the phylogenetic positions of both strains is in the genus Mycobacterium with no obvious relation to any characterized type strains of mycobacteria. Phenotypic characterization revealed that neither strain was similar to the type strains of known species of the genus Mycobacterium in the collective properties of growth, pigmentation or fatty acid composition. Strain DL734T grew at temperatures between 28 and 32 °C, was positive for 3-day arylsulfatase production, and was negative for Tween 80 hydrolysis, urease and nitrate reduction. Strain DL739T grew at temperatures between 28 and 37 °C, and was positive for Tween 80 hydrolysis, urea, nitrate reduction and 3-day arylsulfatase production. Both strains were catalase-negative while only DL739T grew with 5 % NaCl. Fatty acid methyl ester profiles were unique for each strain. DL739T showed an ability to survive at 8 °C with little to no cellular replication and is thus considered to be psychrotolerant. Therefore, strains DL734T and DL739T represent two novel species of the genus Mycobacterium with the proposed names Mycobacterium sarraceniae sp. nov. and Mycobacterium helvum sp. nov., respectively. The type strains are DL734T (=JCM 30395T=NCCB 100519T) and DL739T (=JCM 30396T=NCCB 100520T), respectively.

  7. Efficiency and protective effect of encapsulation of milk immunoglobulin G in multiple emulsion.

    Science.gov (United States)

    Chen, C C; Tu, Y Y; Chang, H M

    1999-02-01

    Milk immunoglobulin G (IgG), separated with protein G affinity chromatography, and IgG in colostral whey were encapsulated by 0.5% (w/v) of Tween 80, sucrose stearate, or soy protein, which were used as secondary emulsifiers in the water in oil in water type multiple emulsion. The residual contents of separated IgG and IgG in colostral whey, ranging from 58.7 to 49.7% and from 13.2 to 21.3%, respectively, in the inner water phase (water phase surrounded by oil phase) with emulsifiers were determined by ELISA. However, the emulsion stability decreased after 24 h, and the residual IgG content in the inner water phase was lowered. Encapsulation of IgG in the multiple emulsion increased the stability of separated IgG against acid (pH 2.0) and alkali (pH 12.0) by 21-56% and 33-62%, respectively, depending on the emulsifier used. Moreover, multiple emulsion also provided a remarkable protective effect on separated IgG stability against proteases. The residual contents of separated IgG in multiple emulsion, using Tween 80 as secondary emulsifier, incubated for 2 h with pepsin (pH 2.0) and trypsin and chymotrypsin (pH 7.6) (enzyme/substrate = 1/20) were 35.4, 72.5, and 82.3%, whereas those of separated IgG in enzyme solution were only 7.2, 33. 1, and 35.2%, respectively. However, the separated IgG loss during the preparation of multiple emulsion was almost 41-50%.

  8. Liposomal α-galactosylceramide is taken up by gut-associated lymphoid tissue and stimulates local and systemic immune responses.

    Science.gov (United States)

    Kaneko, Kan; McDowell, Arlene; Ishii, Yasuyuki; Hook, Sarah

    2017-12-01

    α-Galactosylceramide (α-GalCer), a synthetic glycosphingolipid that exhibits potent immunostimulatory effects through activation of natural killer T (NKT) cells, can be used to treat conditions such as atopy, cancer, infection and autoimmunity. Administration of therapeutics through the oral route has advantages such as patient convenience, safety and reduced cost; however, there has been little research to investigate whether oral delivery of α-GalCer is possible. The aim of this study was therefore to determine whether α-GalCer formulated in either DMSO/Tween 80 or in liposomes, could access lymphoid tissue and stimulate immune activation following oral administration. Fluorescently labelled cationic liposomes incorporating α-GalCer were prepared, characterized and administered by oral gavage to fasted mice. Liposomes were detected inside the Peyer's patches (PPs), in the subepithelial dome just under the follicle-associated epithelium. CD11b + cells and CD11c + were shown to have taken up the formulation in a higher proportion compared to the total cell proportion in the PPs, suggesting that cells with these markers may be the prominent antigen-presenting cells involved in selective uptake. Finally, the liposomal formulation demonstrated a higher degree of immune stimulation compared to the DMSO/Tween 80 solubilized α-GalCer in the PPs, mesenteric lymph nodes and spleen as shown by the increased expression of IL-4 mRNA expression and increased proportion of NKT cells at 6 h and 3 days after administration. These results show that oral delivery of a liposomal α-GalCer can stimulate local and systemic immune responses to a different degree compared to the non-liposomal form. © 2017 Royal Pharmaceutical Society.

  9. Optimization of phytase production by Penicillium purpurogenum GE1 under solid state fermentation by using Box–Behnken design

    Science.gov (United States)

    Awad, Ghada E.A.; Helal, Mohamed M.I.; Danial, Enas N.; Esawy, Mona A.

    2013-01-01

    Phytase production by Penicillium purpurogenum GE1 isolated from soil around bean root nodules was investigated by solid state fermentation (SSF) using mixed substrates consisted of corn cob and corn bran. The SSF conditions were optimized by using one-variable–at-a-time strategy. The optimum conditions for phytase production were at 27 °C, pH 8 and 66% moisture content. The study of different carbon and nitrogen sources revealed that glucose and peptone registered the highest enzyme productivity (92 ± 5.6 U/g ds, 125 ± 4.9 U/g ds). Among different surfactants, maximum phytase productivity was observed with Tween 80 at 0.001 concentrations (170 ± 4.2 U/g ds). A Box–Behnken design was employed to investigate the optimization of the most significant variables affecting the enzyme production. Maximal phytase production was detected after the addition of (g/5 g ds): 0.75 glucose, 0.375 peptone and 0, 01 tween 80. This result represented an improvement in phytase production of 2.6 folds when compared to that previously obtained using the basal medium under the same cultivation conditions. The generated model was found to be very adequate for phytase production (90% accuracy) as the experimental value was 444 ± 3.5 U/g ds compared to 401 U/g ds for the predicted value. In brief, the production of phytase using corn cob and corn bran is a novel and cheap way for the production of this important enzyme and opens a new way for researchers to discover and explore this arena. PMID:24596503

  10. Development of zolmitriptan transfersomes by Box-Behnken design for nasal delivery: in vitro and in vivo evaluation.

    Science.gov (United States)

    Pitta, Shravan Kumar; Dudhipala, Narendar; Narala, Arjun; Veerabrahma, Kishan

    2018-03-01

    The aim was to prepare an optimized zolmitriptan (ZT)-loaded transfersome formulation using Box-Behnken design for improving the bioavailability by nasal route for quick relief of migraine and further to compare with a marketed nasal spray. Here, three factors were evaluated at three levels. Independent variables include: amount of soya lecithin (X 1 ), amount of drug (X 2 ) and amount of tween 80 (X 3 ). The dependent responses were vesicle size (Y 1 ), flexibility index (Y 2 ) and regression coefficient of drug release kinetics (Y 3 ). Prepared formulations were evaluated for physical characters and an optimal system was identified. Further, in vivo pharmacokinetic study was performed in male wistar rats to compare the amount of drug in systemic circulation after intranasal administration. Optimized ZT-transfersome formulation containing 82.74 mg of lecithin (X 1 ), 98.37 mg of zolmitriptan (X 2 ) and 32.2 mg of Tween 80 (X 3 ) and had vesicle size of 93.3 nm, flexibility index of 20.25 and drug release regression coefficient of 0.992. SEM picture analysis revealed that the vesicles were spherical in morphology and had a size more than 1 µm. The formulations were found to be physically stable upon storage at room temperature up to 2 months period, as there were no significant changes noticed in size and ZP. The nasal bioavailability of optimized transfersome formulation was found to be increased by 1.72 times than that of marketed nasal spray (Zolmist ® ). The design and development of zolmitriptan as transfersome provided improved nasal delivery over a conventional nasal spray for a better therapeutic effect.

  11. Alteration in cell surface properties of Burkholderia spp. during surfactant-aided biodegradation of petroleum hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Mohanty, Sagarika; Mukherji, Suparna [Indian Institute of Technology Bombay, Mumbai (India). Centre for Environmental Science and Engineering (CESE)

    2012-04-15

    Chemical surfactants may impact microbial cell surface properties, i.e., cell surface hydrophobicity (CSH) and cell surface charge, and may thus affect the uptake of components from non-aqueous phase liquids (NAPLs). This work explored the impact of Triton X-100, Igepal CA 630, and Tween 80 (at twice the critical micelle concentration, CMC) on the cell surface characteristics of Burkholderia cultures, Burkholderia cepacia (ES1, aliphatic degrader) and Burkholderia multivorans (NG1, aromatic degrader), when grown on a six-component model NAPL. In the presence of Triton X-100, NAPL biodegradation was enhanced from 21% to 60% in B. cepacia and from 18% to 53% in B. multivorans. CSH based on water contact angle (50-52 ) was in the same range for both strains while zeta potential at neutral pH was -38 and -31 mV for B. cepacia and B. multivorans, respectively. In the presence of Triton X-100, their CSH increased to greater than 75 and the zeta potential decreased. This induced a change in the mode of uptake and initiated aliphatic hydrocarbon degradation by B. multivorans and increased the rate of aliphatic hydrocarbon degradation in B. cepacia. Igepal CA 630 and Tween 80 also altered the cell surface properties. For B. cepacia grown in the presence of Triton X-100 at two and five times its CMC, CSH increased significantly in the log growth phase. Growth in the presence of the chemical surfactants also affected the abundance of chemical functional groups on the cell surface. Cell surface changes had maximum impact on NAPL degradation in the presence of emulsifying surfactants, Triton X-100 and Igepal CA630.

  12. Enhancement of encapsulation efficiency of nanoemulsion-containing aripiprazole for the treatment of schizophrenia using mixture experimental design

    Directory of Open Access Journals (Sweden)

    Fard Masoumi HR

    2015-10-01

    Full Text Available Hamid Reza Fard Masoumi, Mahiran Basri, Wan Sarah Samiun, Zahra Izadiyan, Chaw Jiang Lim Nanodelivery Group, Department of Chemistry, Faculty of Science, Universiti Putra Malaysia, Serdang, Selangor, Malaysia Abstract: Aripiprazole is considered as a third-generation antipsychotic drug with excellent therapeutic efficacy in controlling schizophrenia symptoms and was the first atypical anti­psychotic agent to be approved by the US Food and Drug Administration. Formulation of nanoemulsion-containing aripiprazole was carried out using high shear and high pressure homo­genizers. Mixture experimental design was selected to optimize the composition of nanoemulsion. A very small droplet size of emulsion can provide an effective encapsulation for delivery system in the body. The effects of palm kernel oil ester (3–6 wt%, lecithin (2–3 wt%, Tween 80 (0.5–1 wt%, glycerol (1.5–3 wt%, and water (87–93 wt% on the droplet size of aripiprazole nanoemulsions were investigated. The mathematical model showed that the optimum formulation for preparation of aripiprazole nanoemulsion having the desirable criteria was 3.00% of palm kernel oil ester, 2.00% of lecithin, 1.00% of Tween 80, 2.25% of glycerol, and 91.75% of water. Under optimum formulation, the corresponding predicted response value for droplet size was 64.24 nm, which showed an excellent agreement with the actual value (62.23 nm with residual standard error <3.2%. Keywords: schizoaffective disorder, antipsychotic drug, bipolar I disorder, D-optimal mixture design, optimization formulation

  13. Catechol estrogen formation by brain tissue: characterization of a direct product isolation assay for estrogen-2- and 4-hydroxylase activity and its application to studies of 2- and 4-hydroxyestradiol formation by rabbit hypothalamus

    International Nuclear Information System (INIS)

    Hersey, R.M.; Williams, K.I.; Weisz, J.

    1981-01-01

    A direct product isolation assay for quantifying the formation of 2- and 4-hydroxyestradiol (2-OHE2 and 4-OHE2) from [6,7-3H]estradiol by rabbit hypothalami in vitro was developed, and the assay was used to characterize some properties of estrogen-2- and 4-hydroxylase activity in this tissue. The reaction was carried out under conditions that minimized further metabolism of enzymatically formed catechol estrogens. A simple two-step separation procedure, involving the use of a neutral alumina column, followed by thin layer chromatography, was developed to isolate the enzymatically formed catechol estrogens in a radiochemically homogeneous form. The detergent, Tween-80, was found to activate the enzyme and was used routinely at a concentration of 0.1% in the assay. The formation of 2-OHE2 was linear up to 10 min and with increasing protein concentrations up to 150 micrograms/incubation. Similar values were obtained for 4-OHE2. Maximum velocities (Vmax) for the formation of 2- and 4-OHE2 were 190 and 270 pmol/mg protein . 10 min, respectively. The apparent Km values with respect to estradiol for 2-OHE2 and 4-OHE2 were 125 and 150 microM, respectively. The highest specific activity for the enzyme was present in the 100,000 X g supernatant (S3), while the activity in the microsomal fraction (P3) was less than that in the original homogenate. Enzyme activity depended on the presence of NADPH and oxygen and was inhibited by CO as well as by high concentrations of SKF-525A. Estrogen-2- and 4-hydroxylase activity in rabbit hypothalamus differed from that in rat liver in two respects. In the liver, enzyme activity was localized in the microsomal fraction and was virtually abolished by Tween-80. In contrast, enzyme activity in rabbit hypothalamus was maximal in the soluble fraction (100,000 X g supernatant)and was stimulated by the detergent

  14. Characterisation of colloidal drug delivery systems from the naked eye to Cryo-FESEM

    DEFF Research Database (Denmark)

    Krauel, Karen; Girvan, Liz; Hook, Sarah

    2007-01-01

    Poly(ethylcyanoacrylate) nanoparticles prepared by interfacial polymerisation on the basis of microemulsions were prepared in this study and both colloidal systems, nanoparticles and microemulsions, were analysed by visual observation and several microscopic techniques. Phase boundaries...... for the microemulsions of the two pseudoternary systems ethyloleate, polyoxyethylene 20 sorbitan mono-oleate/sorbitan monolaurate and water with and without butanol as a cosurfactant were determined by visual observation of the samples. Microemulsions containing liquid crystals were determined by polarisation light...... microscopy. Using freeze-fracture transmission electron microscopy and Cryo-field emission scanning electron microscopy the type of microemulsion (w/o droplet, bicontinuous, solution) was characterised. Nanoparticles prepared from the different types of microemulsion were additionally observed...

  15. Adsorption at air-water and oil-water interfaces and self-assembly in aqueous solution of ethoxylated polysorbate nonionic surfactants.

    Science.gov (United States)

    Penfold, Jeffrey; Thomas, Robert K; Li, Peixun X; Petkov, Jordan T; Tucker, Ian; Webster, John R P; Terry, Ann E

    2015-03-17

    The Tween nonionic surfactants are ethoxylated sorbitan esters, which have 20 ethylene oxide groups attached to the sorbitan headgroup and a single alkyl chain, lauryl, palmityl, stearyl, or oleyl. They are an important class of surfactants that are extensively used in emulsion and foam stabilization and in applications associated with foods, cosmetics and pharmaceuticals. A range of ethoxylated polysorbate surfactants, with differing degrees of ethoxylation from 3 to 50 ethylene oxide groups, have been synthesized and characterized by neutron reflection, small-angle neutron scattering, and surface tension. In conjunction with different alkyl chain groups, this provides the opportunity to modify their surface properties, their self-assembly in solution, and their interaction with macromolecules, such as proteins. Adsorption at the air-water and oil-water interfaces and solution self-assembly of the range of ethoxylated polysorbate surfactants synthesized are presented and discussed.

  16. Synthesis of insulin-like growth factor 1 analogue (188Re/99Tcm-IGF-1A) and the binding with pancreatic carcinoma cell

    International Nuclear Information System (INIS)

    Zhang Bin; Wu Yiwei; Fan Guanglei; Fan Wo

    2007-01-01

    Objective: An useful and stable method was developed for labeling insulin-like growth factor 1 analogue (IGF-1A) with 188 Re/ 99 Tc m , and its binding characteristic was studied with human pancreatic cancer cell Patu8988 in this study. Methods: The direct labeling method was adopted to label IGF- 1A under different conditions: 2 to 10 μl Tween80; 0.75 to 25 g/L SnCl 2 ·2H 2 O; 20 to 100 μg IGF-1A; 10 to 500 μl 188 ReO 4 - . The labeling rate was dynamically measured from 5 min to 6 h after labeling. The in vitro stabilities of 188 Re/ 99 Tc m -IGF-1A were accessed by dynamic labeling rates measured at 2 to 24 h. SPECT imaging after intravenous injection of 99 Tc m -IGF-1A and intratumoral injection of 188 Re-IGF-1A in nude mice was performed. Results: The best condition for labeling 188 Re was: 100 μl SnCl 2 ·2H 2 O (10 g/L), 50 μl IGF-1A (2 g/L), 300 μl Na 3 PO 4 , l0 μl 0.1% Tween80, 50 μl 188 ReO 4 - with 30 min reaction time at room temperature and pH 7.0. The maximum labeling rate of 188 Re-IGF-1A was (94.07 ± 0.32)%. The radiochemical purity was (76.57 ± 9.96)% at 24 h after mixing with human serum. The maximum binding efficiency of 188 Re-IGF-1A with Patu8988 cell was (24.13 ± 2.03)% , and the specific binding was 12.68%. The best labeling condition of 99 Tc m was: 100 μl SnCl 2 ·2H 2 O (3 g/L), 40 μl IGF-1A (2 g/L), 2 μl 0.1% Tween80, 50 μl 99 Tc m O - 4. The maximum labeling rate of 99 Tc m -IGF-1A was (94.43 ± 0.75)% and the radiochemical purity was (54.07 ± 3.86)% at 24 h after mixing with human serum. The maximum binding with Patu8988 cell was (22.95 ± 3.94)%, and the specific binding rate was 19.31%. The tumors in nude mice could be best imaged at 6 h after intravenous injection of 99 Tc m -IGF-1A and 48 h after intratumoral injection of 188 Re-IGF-1A. Conclusions: The presented method of labeling IGF-1A with 188 Re/ 99 Tc m was stable and efficient. 188 Re/ 99 Tc m -IGF-1A could bind with the pancreatic cancer cell Patu8988

  17. Development of a synthetic pathway for a sustainable plasticizer

    DEFF Research Database (Denmark)

    Søndergaard, Helle

    monooleate originating from sunflower oil. Sunflower oil is less expensive and more accessible compared to castor oil and the SNS-A has been tested to have the same plasticizing effect and non-toxic effects as SNS. However, a sustainable and cheap way of synthesizing SNS-A has not been developed. The aim...... and three different catalysts, known to be efficient in CTH reactions. However, no satisfying results were obtained using CTH as a hydrogenation method. Using molecular hydrogen gas for hydrogenation also resulted in problems. The hydrogenation of the epoxide obtained from epoxidation with peracetic acid...

  18. Characterization of particle-induced Clara cell hyperplasia in rat lungs; Charakterisierung der Partikel-induzierten Clarazell-Hyperplasie in der Rattenlunge

    Energy Technology Data Exchange (ETDEWEB)

    Albrecht, C.; Adolf, B.; Weishaupt, C.; Hoehr, D.; Zeittraeger, I.; Borm, P.J.A. [Heinrich-Heine Univ., Duesseldorf (Germany). Medizinisches Inst. fuer Umwelthygiene; Friemann, J. [Unfallkrankenhaus Berlin (Germany). Inst. fuer Pathologie

    2001-10-01

    The aim of this study was to examine Clara cells after particle exposure by in situ hybridization as well as to characterize cell proliferation and function in xenobiotic metabolism. Female Wistar rats were intratracheally instilled with coal dust samples of variable quartz content, quartz (DQ12), Titanium dioxide, or saline solution containing 0.5% Tween 80. After 126-129 weeks, all particle-exposed animals developed Clara cell hyperplasia i.e. up to 0.48% of the total lung area which was significantly increased compared to Titanium dioxide and control animals. Our data also showed proliferation and hyperplasia of bronchiolar Clara cells by coal dusts independent of their quartz content. The lack of proliferating cell nuclear antigen staining in most of the hyperplastic Clara cells suggests that following damage of alveolar epithelial cells, Clara cells migrate in and remodulate the alveolar epithelium. After the migration they keep their function in the xenobiotic metabolism as shown by expansion of CYP2E1 active Clara cells. The minor development of Clara cell hyperplasia in Titanium dioxide treated rats indicates that this is not a general particle effect, and possibly due to its lower toxicity to epithelial cells. (orig.) [German] Ziel dieser Studie war die Untersuchung der Clarazellen nach Partikelexposition mittels in situ Hybridisierung sowie die Charakterisierung hinsichtlich Zellproliferation und Funktion im xenobiotischen Stoffwechsel. Weibliche Wistar-Ratten wurden intratracheal mit Kohlenstaeuben unterschiedlichen Quarzgehaltes, Quarz DQ12, Titandioxide oder physiologischer Kochsalzloesung mit einem Gehalt von 0,5% Tween 80 instilliert. Die 126-129 Wochen nach der intratrachealen Instillation mit schwerloeslichen Partikeln obduzierten Tiere wiesen alle eine Clarazellhyperplasie in bis zu 0,48% des gesamten Lungengewebes auf, die gegenueber den Titandioxid-behandelten und den Kontrolltieren statistisch signifikant war. Die Clarazellproliferation und

  19. Determination of some significant batch culture conditions affecting acetyl-xylan esterase production by Penicillium notatum NRRL-1249

    Directory of Open Access Journals (Sweden)

    Akhtar MN

    2011-05-01

    Full Text Available Abstract Background Acetyl-xylan esterase (AXE, EC 3.1.1.72 hydrolyses acetate group from the linear chain of xylopyranose residues bound by β-1,4-linkage. The enzyme finds commercial applications in bio-bleaching of wood pulp, treating animal feed to increase digestibility, processing food to increase clarification and converting lignocellulosics to feedstock and fuel. In the present study, we report on the production of an extracellular AXE from Penicillium notatum NRRL-1249 by solid state fermentation (SSF. Results Wheat bran at a level of 10 g (with 4 cm bed height was optimized as the basal substrate for AXE production. An increase in enzyme activity was observed when 7.5 ml of mineral salt solution (MSS containing 0.1% KH2PO4, 0.05% KCl, 0.05% MgSO4.7H2O, 0.3% NaNO3, 0.001% FeSO4.2H2O and 0.1% (v/w Tween-80 as an initial moisture content was used. Various nitrogen sources including ammonium sulphate, urea, peptone and yeast extract were compared for enzyme production. Maximal enzyme activity of 760 U/g was accomplished which was found to be highly significant (p ≤ 0.05. A noticeable enhancement in enzyme activity was observed when the process parameters including incubation period (48 h, initial pH (5, 0.2% (w/w urea as nitrogen source and 0.5% (v/w Tween-80 as a stimulator were further optimized using a 2-factorial Plackett-Burman design. Conclusion From the results it is clear that an overall improvement of more than 35% in terms of net enzyme activity was achieved compared to previously reported studies. This is perhaps the first report dealing with the use of P. notatum for AXE production under batch culture SSF. The Plackett-Burman model terms were found highly significant (HS, suggesting the potential commercial utility of the culture used (df = 3, LSD = 0.126.

  20. Production of endoglucanase by the native strains of Streptomyces isolates in submerged fermentation

    Directory of Open Access Journals (Sweden)

    P. Chellapandi

    2008-03-01

    Full Text Available Cellulase is a complex enzyme system, commercially produced by filamentous fungi under solid-state and submerged cultivation. It has wide applicability in textile, food and beverage industry for effective saccharification process. In this study, cellulolytic enzyme activity, particularly endoglucanase of 26 Streptomyces strains isolated from garden soil was examined, including two isolates selected on the basis of potential cellulolytic activity on Bennett's agar medium. To enhance the endoglucanase formation in broth culture, different conditions including carbon and nitrogen sources, and growth conditions were tested. The maximum endoglucanase activity (11.25-11.90 U/mL was achieved within 72-88 h in fermentation medium containing Tween-80, followed by phosphate sources. Both cellulolytic Streptomyces isolates gave almost equal quantity of enzyme in all trials. However the effect of medium ingredients on endoglucanase induction diverged with strains in some extent.A celulase é um sistema enzimático complexo, produzido comercialmente a partir de fungos filamentosos através de cultivo em estádio sólido e submerso. Tem uma grande aplicação na indústria têxtil e de alimentos e bebidas no processo de sacarificação. Nesse estudo, examinou-se a atividade celulolítica, especialmente de englucanase, de 26 cepas de Streptomyces isoladas de solo, incluindo duas cepas selecionadas por sua atividade celulolítica no ágar Bennett. Para estimular a produção de englucanase em meio de cultura, diferentes condições de cultivo, incluindo fonte de carbono e nitrogênio e condições de crescimento, foram avaliadas. A atividade máxima de glucanase (11,25 a 11,90 U/mL foi obtida em 72-88h em meio de cultura contendo Tween-80, seguido por fontes de fosfato. Ambas as cepas celulolíticas de Streptomyces produziram quase a mesma quantidade de enzima em todos os experimentos. Entretanto, o efeito dos ingredientes do meio na indução da glucanase

  1. Assessing storage of stability and mercury reduction of freeze-dried Pseudomonas putida within different types of lyoprotectant

    Science.gov (United States)

    Azoddein, Abdul Aziz Mohd; Nuratri, Yana; Azli, Faten Ahada Mohd; Bustary, Ahmad Bazli

    2017-12-01

    Pseudomonas putida is a potential strain in biological treatment to remove mercury contained in the effluent of petrochemical industry due to its mercury reductase enzyme that able to reduce ionic mercury to elementary mercury. Freeze-dried P. putida allows easy, inexpensive shipping, handling and high stability of the product. This study was aimed to freeze dry P. putida cells with addition of lyoprotectant. Lyoprotectant was added into the cells suspension prior to freezing. Dried P. putida obtained was then mixed with synthetic mercury. Viability of recovery P. putida after freeze dry was significantly influenced by the type of lyoprotectant. Among the lyoprotectants, tween 80/ sucrose was found to be the best lyoprotectant. Sucrose was able to recover more than 78% (6.2E+09 CFU/ml) of the original cells (7.90E+09CFU/ml) after freeze dry and able to retain 5.40E+05 viable cells after 4 weeks storage at 4 °C without vacuum. Polyethylene glycol (PEG) pre-treated freeze dried cells and broth pre-treated freeze dried cells after the freeze-dry process recovered more than 64% (5.0 E+09CFU/ml) and >0.1% (5.60E+07CFU/ml). Freeze-dried P. putida cells in PEG and broth cannot survive after 4 weeks storage. Freeze dry also does not really change the pattern of growth P. putida but extension of lag time was found 1 hour after 3 weeks of storage. Additional time was required for freeze-dried P. putida cells to recover before introducing freeze-dried cells to more complicated condition such as mercury solution. The maximum mercury reduction of PEG pre-treated freeze-dried cells after freeze dry and after storage of 3 weeks was 17.91 %. The maximum of mercury reduction of tween 80/sucrose pre-treated freeze-dried cells after freeze dry and after storage 3 weeks was 25.03%. Freeze dried P. putida was found to have lower mercury reduction compare to the fresh P. putida that has been grown in agar. Result from this study may be beneficial and useful as initial reference before

  2. Synthesis and characterization of C-doped TiO{sub 2} thin films for visible-light-induced photocatalytic degradation of methyl orange

    Energy Technology Data Exchange (ETDEWEB)

    Hassan, Mohamed Elfatih; Cong, Longchao; Liu, Guanglong, E-mail: liugl@mail.hzau.edu.cn; Zhu, Duanwei; Cai, Jianbo

    2014-03-01

    Graphical abstract: - Highlights: • C-TiO{sub 2} thin films were successfully synthesized by modified sol–gel method based on the self-assembly technique. • Tween 80, one kind of hydrocarbon surfactants, was used as template and carbon precursor. • A thorough material characterization was performed to determine the effect of calcination time on the structural and optical properties of the synthesized catalyst films. - Abstract: C-TiO{sub 2} thin films were synthesized by a modified sol–gel route based on the self-assembly technique exploiting Tween80 (T80) as a pore directing agent and carbon source. The effect of calcination time on the photocatalytic activity of C-doped TiO{sub 2} catalyst was studied. The samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transforms infrared (FTIR), UV–vis diffuse reflectance spectroscopy, and photoluminescence spectra (PL). The XRD results showed that C-TiO{sub 2} sample calcined at 400 °C for various times exhibited anatase phase and no other crystal phase was identified. C-TiO{sub 2} exhibited a shift in an absorption edge of samples in the visible region than that of conventional or reference TiO{sub 2}. The XPS results showed an existence of C in the TiO{sub 2} catalysts and C might be existed as C-O-Ti group. Moreover, the C-TiO{sub 2} thin film calcined at 400 °C for 30 min showed the lowest PL intensity due to a decrease in the recombination rate of photogenerated electrons and holes under UV light irradiation. Also the photocatalytic activity of synthesized catalyst was evaluated by decomposition of methyl orange (MO) under visible light irradiation. The results showed that the optimum preparations of C-TiO{sub 2} thin films were found to be under calcination temperature of 400, calcination time of 30 min, and with preparation 9 layers film.

  3. Development and evaluation of targeting ligands surface modified paclitaxel nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Sohn, Jeong Sun [Division of Undeclared Majors, Chosun University, Gwangju 501-759 (Korea, Republic of); Yoon, Doo-Soo; Sohn, Jun Youn [Department of Bioenvironmental & Chemical Engineering, Chosun College of Science & Technology, Gwangju 501-744 (Korea, Republic of); Park, Jeong-Sook, E-mail: eicosa@cnu.ac.kr [College of Pharmacy and Institute of Drug Research and Development, Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon 34134 (Korea, Republic of); Choi, Jin-Seok, E-mail: c34281@gmail.com [College of Pharmacy and Institute of Drug Research and Development, Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon 34134 (Korea, Republic of)

    2017-03-01

    To overcome the toxicity of excipient or blank nanoparticles for drug delivery nano-system, the surface modified paclitaxel nanocrystals (PTX-NC) have been developed. PTX-NCs were prepared by nano-precipitation method. The surface of PTX-NCs were modified by grafting with apo-transferrin (Tf) or hyaluronic acid (HA). The physical properties of PTX-NCs were evaluated by field emission scanning electron microscope (FE-SEM), zeta-sizer, zeta-potential, differential scanning calorimetry (DSC) and Fourier transform infrared (FT-IR) spectrometry. In vitro drug release study was performed in phosphate buffered saline (PBS) with or without 0.5% (w/v) Tween 80 for 24 h. Cellular uptake was studied at time intervals of 0.5, 1, and 2 h in MCF-7 cells, and cell growth inhibition study was performed for 24 h using MCF-7 cells (cancer cells), and HaCaT cells (normal cells). Three different types of PTX-NCs with a mean size of 236.0 ± 100.6 nm (PTX-NC), 302.0 ± 152.0 nm (Tf-PTX-NC) and 339 ± 180.6 nm (HA-PTX-NC) were successfully prepared. The drug release profiles showed 29.1%/6.9% (PTX (pure)), 40.7%/23.9% (PTX-NC), 50.5%/25.1% (Tf-PTX-NC) and 46.8/24.8% (HA-PTX-NC) in PBS with/without 0.5% (w/v) Tween 80 for 24 h, respectively. As per the results, the drug release of PTX-NCs showed the faster release as compared to that of PTX (pure). Surface modified PTX-NCs exhibited higher values for cell permeability than unmodified PTX-NC in the cellular uptake study. Surface modified PTX-NCs inhibited the cell growth approximately to 60% in MCF-7 cells, however effect of surface modified PTX-NCs on normal cell line was lower than the PTX-NC and PTX (pure). In conclusion, biological macromolecules (Tf or HA) surface modified PTX-NC enhanced the cellular uptake and the cell growth inhibition. - Highlights: • Surface modified PTX-NCs with HA and Tf are successfully prepared by adsorption method. • Enhanced cellular uptake of modified PTX-NCs compared to unmodified PTX-NC • Improved

  4. The Host Response to a Clinical MDR Mycobacterial Strain Cultured in a Detergent-Free Environment: A Global Transcriptomics Approach.

    Science.gov (United States)

    Leisching, Gina; Pietersen, Ray-Dean; Mpongoshe, Vuyiseka; van Heerden, Carel; van Helden, Paul; Wiid, Ian; Baker, Bienyameen

    2016-01-01

    During Mycobacterium tuberculosis (M.tb) infection, the initial interactions between the pathogen and the host cell determines internalization and innate immune response events. It is established that detergents such as Tween alter the mycobacterial cell wall and solubilize various lipids and proteins. The implication of this is significant since induced changes on the cell wall affect macrophage uptake and the immune response to M.tb. Importantly, during transmission between hosts, aerosolized M.tb enters the host in its native form, i.e. in a detergent-free environment, thus in vitro and in vivo studies should mimic this as closely as possible. To this end, we have optimized a procedure for growing and processing detergent-free M.tb and assessed the response of murine macrophages (BMDM) infected with multi drug-resistant M.tb (R179 Beijing 220 clinical isolate) using RNAseq. We compared the effects of the host response to M.tb cultured under standard laboratory conditions (Tween 80 containing medium -R179T), or in detergent-free medium (R179NT). RNAseq comparisons reveal 2651 differentially expressed genes in BMDMs infected with R179T M.tb vs. BMDMs infected with R179NT M.tb. A range of differentially expressed genes involved in BMDM receptor interaction with M.tb (Mrc1, Ifngr1, Tlr9, Fpr1 and Itgax) and pro-inflammatory cytokines/chemokines (Il6, Il1b, Tnf, Ccl5 and Cxcl14) were selected for analysis through qPCR. BMDMs infected with R179NT stimulate a robust inflammatory response. Interestingly, R179NT M.tb induce transcription of Fpr1, a receptor which detects bacterial formyl peptides and initiates a myriad of immune responses. Additionally we show that the host components Cxcl14, with an unknown role in M.tb infection, and Tlr9, an emerging role player, are only stimulated by infection with R179NT M.tb. Taken together, our results suggest that the host response differs significantly in response to Tween 80 cultured M.tb and should therefore not be used in

  5. The Host Response to a Clinical MDR Mycobacterial Strain Cultured in a Detergent-Free Environment: A Global Transcriptomics Approach.

    Directory of Open Access Journals (Sweden)

    Gina Leisching

    Full Text Available During Mycobacterium tuberculosis (M.tb infection, the initial interactions between the pathogen and the host cell determines internalization and innate immune response events. It is established that detergents such as Tween alter the mycobacterial cell wall and solubilize various lipids and proteins. The implication of this is significant since induced changes on the cell wall affect macrophage uptake and the immune response to M.tb. Importantly, during transmission between hosts, aerosolized M.tb enters the host in its native form, i.e. in a detergent-free environment, thus in vitro and in vivo studies should mimic this as closely as possible. To this end, we have optimized a procedure for growing and processing detergent-free M.tb and assessed the response of murine macrophages (BMDM infected with multi drug-resistant M.tb (R179 Beijing 220 clinical isolate using RNAseq. We compared the effects of the host response to M.tb cultured under standard laboratory conditions (Tween 80 containing medium -R179T, or in detergent-free medium (R179NT. RNAseq comparisons reveal 2651 differentially expressed genes in BMDMs infected with R179T M.tb vs. BMDMs infected with R179NT M.tb. A range of differentially expressed genes involved in BMDM receptor interaction with M.tb (Mrc1, Ifngr1, Tlr9, Fpr1 and Itgax and pro-inflammatory cytokines/chemokines (Il6, Il1b, Tnf, Ccl5 and Cxcl14 were selected for analysis through qPCR. BMDMs infected with R179NT stimulate a robust inflammatory response. Interestingly, R179NT M.tb induce transcription of Fpr1, a receptor which detects bacterial formyl peptides and initiates a myriad of immune responses. Additionally we show that the host components Cxcl14, with an unknown role in M.tb infection, and Tlr9, an emerging role player, are only stimulated by infection with R179NT M.tb. Taken together, our results suggest that the host response differs significantly in response to Tween 80 cultured M.tb and should therefore not

  6. Medio EMJH modificado para el cultivo de Leptospira interrogans serogrupo Ballum Modified EMJH medium for cultivation of Leptospira interrogans serogroup Ballum

    Directory of Open Access Journals (Sweden)

    A. González

    2006-04-01

    Full Text Available El serogrupo Ballum agrupa cepas de crecimiento fastidioso, con requerimientos nutricionales más exigentes que otras cepas patógenas de Leptospira. Fue evaluada la influencia de 37 compuestos nutricionales sobre el crecimiento de Leptospira interrogans serogrupo Ballum, tomando como base para el estudio al medio sintético EMJH. El crecimiento microbiano fue estimado espectrofotométricamente y por conteo directo en cámara de Petroff-Hausser. La estabilidad de la virulencia fue evaluada en hamsters mediante el cálculo de la dosis letal media. La estabilidad de la antigenicidad fue evaluada mediante Western blotting con antisuero policlonal específico. Bajo condiciones de cultivo controladas se logró triplicar los rendimientos de biomasa comúnmente obtenidos en el medio EMJH sin afectación de la virulencia y antigenicidad tras el incremento de la concentración de Tween 80 y la incorporación de acetato de sodio y extracto de carne. El incremento de la concentración de al menos 6 componentes del EMJH o la incorporación de una variedad de nuevos nutrientes no estimularon apreciablemente los rendimientos de biomasa o la velocidad específica de crecimiento del microorganismo. Los resultados obtenidos permiten disponer de un medio de cultivo enriquecido capaz de sustentar elevados rendimientos de biomasa de este serogrupo exigente de mayor circulación en humanos en Cuba.Strains within the Ballum serogroup of spirochete Leptospira show fastidious growth with more exigent nutritional requirements than those of other Leptospira pathogenic strains. The influence of 37 nutritional compounds on the growth of Leptospira interrogans serogroup Ballum was investigated employing the synthetic EMJH medium as the base for the study. Microbial growth was estimated spectrophotometrically and direct counts were performed with a Petroff-Hausser counting chamber. Virulence stability was evaluated by calculating the mean lethal dose in hamsters

  7. Solid self-nanoemulsifying drug delivery systems for oral delivery of polypeptide-k: Formulation, optimization, in-vitro and in-vivo antidiabetic evaluation.

    Science.gov (United States)

    Garg, Varun; Kaur, Puneet; Singh, Sachin Kumar; Kumar, Bimlesh; Bawa, Palak; Gulati, Monica; Yadav, Ankit Kumar

    2017-11-15

    Development of self-nanoemulsifying drug delivery systems (SNEDDS) of polypeptide-k (PPK) is reported with the aim to achieve its oral delivery. Box-Behnken design (BBD) was adopted to develop and optimize the composition of SNEDDS. Oleoyl polyoxyl-6 glycerides (A), Tween 80 (B), and diethylene glycol monoethyl ether (C) were used as oil, surfactant and co-surfactant, respectively as independent variables. The effect of variation in their composition was observed on the mean droplet size (y1), polydispersity index (PDI) (y2), % drug loading (y3) and zeta potential (y4). As per the optimal design, seventeen SNEDDS prototypes were prepared. The optimized composition of SNEDDS formulation was 25% v/v Oleoyl polyoxyl-6 glycerides, 37% v/v Tween 80, 38% v/v diethylene glycol monoethyl ether, and 3% w/v PPK. The optimized formulation revealed values of y1, y2, y3, and y4 as 31.89nm, 0.16, 73.15%, and -15.65mV, respectively. Further the optimized liquid SNEDDS were solidified through spray drying using various hydrophilic and hydrophobic carriers. Among the various carriers, Aerosil 200 was found to provide desirable flow, compression, disintegration and dissolution properties. Both, liquid and solid-SNEDDS have shown release of >90% within 10min. The formulation was found stable with change in pH, dilution, temperature variation and freeze thaw cycles in terms of droplet size, zeta potential, drug precipitation and phase separation. Crystalline PPK was observed in amorphous state in solid SNEDDS when characterized through DSC and PXRD studies. The biochemical, hematological and histopathological results of streptozotocin induced diabetic rats shown promising antidiabetic potential of PPK loaded in SNEDDS at its both the doses (i.e. 400mg/kg and 800mg/kg) as compared to its naïve form at both the doses. The study revealed successful formulation of SNEDDS for oral delivery of PPK. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Separation of neutral compounds by microemulsion electrokinetic chromatography

    DEFF Research Database (Denmark)

    Gabel-Jensen, Charlotte; Hansen, Steen Honore'; Pedersen-Bjergaard, S

    2001-01-01

    by replacement of half the content of sodium dodecyl sulfate (SDS) with either sodium dioctyl sulfosuccinate (SDOSS), 3-(N,N-dimethylmyristylammonio) propanesulfonate (MAPS), polyoxyethylene sorbitan monolaurate (Tween 21), and polyoxyethylene 23 lauryl ether (Brij 35). MEEKC was also accomplished with 3.......3% of the anionic surfactant sodium cholate and with the cationic surfactant N-cetyl-N,N,N-trimethylammonium bromide (CTMA). Both provided substantial differences in selectivity as compared to the SDS-based systems. With SDS as surfacant, the concentration was varied within 1.0-4.5%. Minor selectivity changes were...

  9. Estimation of the Intestinal Absorption and Metabolism Behaviors of 2- and 3-Monochloropropanediol Esters.

    Science.gov (United States)

    Kaze, Naoki; Watanabe, Yomi; Sato, Hirofumi; Murota, Kaeko; Kotaniguchi, Miyako; Yamamoto, Hiroshi; Inui, Hiroshi; Kitamura, Shinichi

    2016-08-01

    The regioisomers of the di- and mono-oleate of monochloropropanediol (MCPD) have been synthesized and subsequently hydrolyzed with pancreatic lipase and pancreatin to estimate the intestinal digestion and absorption of these compounds after their intake. The hydrolysates were analyzed by HPLC using a corona charged aerosol detection system, which allowed for the separation and detection of the different regioisomers of the MCPD esters. The hydrolysates were also analyzed by GC-MS to monitor the free MCPD. The results indicated that the two acyl groups of 2-MCPD-1,3-dioleate were smoothly hydrolyzed by pancreatic lipase and pancreatin to give free 2-MCPD. In contrast, the hydrolysis of 3-MCPD-1,2-dioleate proceeded predominantly at the primary position to produce 3-MCPD-2-oleate. 2-MCPD-1-oleate and 3-MCPD-1-oleate were further hydrolyzed to free 2- and 3-MCPD by pancreatic lipase and pancreatin, although the hydrolysis of 3-MCPD-2-oleate was 80 % slower than that of 3-MCPD-1-oleate. The intestinal absorption characteristics of these compounds were evaluated in vitro using a Caco-2 cell monolayer. The results revealed that the MCPD monooleates, but not the MCPD dioleates, were hydrolyzed to produce the free MCPD in the presence of the Caco-2 cells. The resulting free MCPD permeated the Caco-2 monolayer most likely via a diffusion mechanism because their permeation profiles were independent of the dose. Similar permeation profiles were obtained for 2- and 3-MCPDs.

  10. Effect of Polysorbate 20 and Polysorbate 80 on the Higher-Order Structure of a Monoclonal Antibody and Its Fab and Fc Fragments Probed Using 2D Nuclear Magnetic Resonance Spectroscopy.

    Science.gov (United States)

    Singh, Surinder M; Bandi, Swati; Jones, David N M; Mallela, Krishna M G

    2017-12-01

    We examined how polysorbate 20 (PS20; Tween 20) and polysorbate 80 (PS80; Tween 80) affect the higher-order structure of a monoclonal antibody (mAb) and its antigen-binding (Fab) and crystallizable (Fc) fragments, using near-UV circular dichroism and 2D nuclear magnetic resonance (NMR). Both polysorbates bind to the mAb with submillimolar affinity. Binding causes significant changes in the tertiary structure of mAb with no changes in its secondary structure. 2D 13 C- 1 H methyl NMR indicates that with increasing concentration of polysorbates, the Fab region showed a decrease in crosspeak volumes. In addition to volume changes, PS20 caused significant changes in the chemical shifts compared to no changes in the case of PS80. No such changes in crosspeak volumes or chemical shifts were observed in the case of Fc region, indicating that polysorbates predominantly affect the Fab region compared to the Fc region. This differential effect of polysorbates on the Fab and Fc regions was because of the lesser thermodynamic stability of the Fab compared to the Fc. These results further indicate that PS80 is the preferred polysorbate for this mAb formulation, because it offers higher protection against aggregation, causes lesser structural perturbation, and has weaker binding affinity with fewer binding sites compared to PS20. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  11. Characterization of L-asparaginase from marine-derived Aspergillus niger AKV-MKBU, its antiproliferative activity and bench scale production using industrial waste.

    Science.gov (United States)

    Vala, Anjana K; Sachaniya, Bhumi; Dudhagara, Dushyant; Panseriya, Haresh Z; Gosai, Haren; Rawal, Rakesh; Dave, Bharti P

    2018-03-01

    L-asparaginase (LA), an enzyme with anticancer activities, produced by marine-derived Aspergillus niger was subjected to purification and characterization. The purified enzyme was observed to have molecular weight ∼90KDa. The enzyme retained activity over a wide range of pH, i.e. pH 4-10. The enzyme was quite stable in temperature range 20-40°C. Tween 80 and Triton X-100 were observed to enhance LA activity while inhibition of LA activity was observed in presence of heavy metals. The values for K m was found to be 0.8141 mM and V max was 6.228μM/mg/min. The enzyme exhibited noteworthy antiproliferative activity against various cancer cell lines tested. Successful bench scale production (in 5L bioreacator) of LA using groundnut oil cake as low cost substrate has also been carried out. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. ATR-FTIR Based Pre and Post Formulation Compatibility Studies for the Design of Niosomal Drug Delivery System Containing Nonionic Amphiphiles and Chondroprotective Drug

    International Nuclear Information System (INIS)

    Khan, M.I.; Madni, A.; Ahmad, S.; Rehmanand, M.; Mahmood, M.A.; Khan, A.

    2015-01-01

    Pharmaceutical compatibility studies are considered as the most important and first screening stage during development of pharmaceutical drug product. Attenuated total reflectance/fourier transform infrared (ATR-FTIR) is one of the techniques currently available to pharmaceutical scientists for investigating the compatibilities between active drug and inactive pharmaceutical ingredients. The present study was designed to assess the interaction among different niosomes forming components i.e nonionic amphiphiles and chondroprotective/antiinflamatory drug Diacerein by ATR-FTIR method. Physical mixtures and niosomes were prepared by physical mixing and thin film hydration method, respectively. The individual niosomal components, physical mixtures as well as niosomal formulations were analyzed. The spectra of Diacerein showed characteristic peaks at 3300 cm/sup -1/(-COOH) and 760 cm/sup -1/(msubstituted benzene), Span 60 at 2916 cm/sup -1/(-OH), Span 80 at 1740 cm/sup -1/(5- membered ring), Span 85 at 1643 cm/sup -1/(ketone with 5-membered ring), Tween 20 at 1734 cm/sup 1/ (5-membered ring) and Tween 80 at 3488 cm/sup -1/(-OH). The characteristic peaks of Diacerein were present in niosomal formulations with slight shift at 3355-3379 cm/sup -1/(-COOH) and 760-770 cm/sup -1/(m-substituted benzene). This work suggested no significant interaction in characteristic peaks of Diacerein after combining with nonionic surfactants as physical mixtures and niosomal formulations which proposed potential for niosomes to encapsulate diacerein in their micro vicinity. (author)

  13. Characterization of nanoparticles of lidocaine in w/o microemulsions using small-angle neutron scattering and dynamic light scattering

    International Nuclear Information System (INIS)

    Shukla, A.; Kiselev, M.A.; Hoell, A.; Neubert, R.H.H.

    2004-01-01

    Microemulsions (MEs) are of special interest because a variety of reactants can be introduced into the nanometer-sized aqueous domains, leading to materials with controlled size and shape. In the past few years, significant research has been conducted in the reverse ME-mediated synthesis of organic nanoparticles. In this study, a w/o ME medium was employed for the synthesis of lidocaine by direct precipitation in w/o microemulsion systems: water/isopropylpalmitat/Tween80/Span80. The particle size as well as the location of nanoparticles in the ME droplet were characterized by means of dynamic light scattering (DLS) and small angle neutron scattering (SANS). It is observed that lidocaine precipitated in the aqueous cores because of its insolubility in water. Hydrodynamic radius and gyration radius of microemulsion droplets were estimated as ∼15 nm and ∼4.50 nm from DLS and SANS respectively. Furthermore, different size parameters obtained by DLS and SANS experiments were compared. (author)

  14. Characterization of nanoparticles of lidocaine in w/o microemulsions using small-angle neutron scattering and dynamic light scattering

    Science.gov (United States)

    Shukla, A.; Kiselev, M. A.; Hoell, A.; Neubert, R. H. H.

    2004-08-01

    Microemulsions (MEs) are of special interest because a variety of Reactants can be introduced into the nanometer-sized aqueous domains, leading to materials with controlled size and shape [1,2]. In the past few years, significant research has been conducted in the reverse ME-mediated synthesis of organic nanoparticles [3,4]. In this study, a w/o ME medium was employed for the synthesis of lidocaine by direct precipitation in w/o microemulsion systems: water/isopropylpalmitat/Tween80/Span80. The particle size as well as the location of nanoparticles in the ME droplet were characterized by means of dynamic light scattering (DLS) and small angle neutron scattering (SANS). It is observed that lidocaine precipitated in the aqueous cores because of its insolubility in water. Hydrodynamic radius and gyration radius of microemulsion droplets were estimated as ~15 nm and ~4.50 nm from DLS and SANS respectively. Furthermore, different size parameters obtained by DLS and SANS experiments were compared

  15. Is Oxidative Stress in Mice Brain Regions Diminished by 2-[(2,6-Dichlorobenzylideneamino]-5,6-dihydro-4H-cyclopenta[b]thiophene-3-carbonitrile?

    Directory of Open Access Journals (Sweden)

    A. C. Fortes

    2013-01-01

    Full Text Available 2-[(2,6-Dichlorobenzylideneamino]-5,6-dihydro-4H-cyclopenta[b]thiophene-3-carbonitrile, 5TIO1, is a new 2-aminothiophene derivative with promising pharmacological activities. The aim of this study was to evaluate its antioxidant activity in different areas of mice central nervous system. Male Swiss adult mice were intraperitoneally treated with Tween 80 dissolved in 0.9% saline (control group and 5TIO1 (0.1, 1, and 10 mg kg−1. Brain homogenates—hippocampus, striatum, frontal cortex, and cerebellum—were obtained after 24 h of observation. Superoxide dismutase and catalase activities, lipid peroxidation and nitrite content were measured using spectrophotometrical methods. To clarify the 5TIO1’s mechanism on oxidative stress, western blot analysis of superoxide dismutase and catalase was also performed. 5TIO1 decreased lipid peroxidation and nitrite content in all brain areas and increased the antioxidant enzymatic activities, specially, in cerebellum. The data of Western blot analysis did not demonstrate evidence of the upregulation of these enzymes after the administration of this compound. Our findings strongly support that 5TIO1 can protect the brain against neuronal damages regularly observed during neuropathologies.

  16. [Ovicidal and larvicidal activity in vitro of Eucalyptus globulus essential oils on Haemonchus contortus].

    Science.gov (United States)

    Macedo, Iara T F; Bevilaqua, Claudia M L; de Oliveira, Lorena M B; Camurça-Vasconcelos, Ana L F; Vieira, Luiz da S; Oliveira, Fabrício R; Queiroz-Junior, Eudson M; Portela, Bruno G; Barros, Renata S; Chagas, Ana C S

    2009-01-01

    The objective of this work was to evaluate ovicidal and larvicidal effects of Eucalyptus globulus essential oil (EGEO) on Haemonchus contortus. The chemical composition determination of EGEO was through gas chromatography and mass spectrometry. Egg hatch test (EHT) was performed in concentrations 21.75; 17.4; 8.7; 5.43 e 2.71 mg x mL(-1). In larval development test (LDT) were used the concentrations 43.5; 21.75; 10.87; 5.43 e 2.71 mg x mL(-1). Each trial was conducted by negative control with Tween 80 (3%) and positive control, 0.02 mg x mL(-1) of thiabendazole in EHT and 0.008 mg x mL(-1) of ivermectin in LDT. The maximum effectiveness of EGEO on eggs was 99.3% in concentration of 21.75 mg x mL(-1) and on larvae was 98.7% in concentration 43.5 mg x mL(-1). The concentration of EGEO that inhibits 50% of the eggs and larvae was 8.3 and 6.92 mg x mL(-1), respectively. The oil chemical analysis identified as main component the monoterpen 1,8-cineol. EGEO presented ovicidal and larvicidal activities in vitro, revealing a good potential for use in the control of sheep and goat gastrointestinal nematodes.

  17. Physico-chemical characterization of nano-emulsions in cosmetic matrix enriched on omega-3.

    Science.gov (United States)

    Kabri, Tin-Hinan; Arab-Tehrany, Elmira; Belhaj, Nabila; Linder, Michel

    2011-09-21

    Nano-emulsions, as non-equilibrium systems, present characteristics and properties which depend not only on composition but also on their method of preparation. To obtain better penetration, nanocosmeceuticals use nano-sized systems for the delivery of active ingredients to targeted cells. In this work, nano-emulsions composed of miglyol, rapeseed oil and salmon oil were developed as a cosmetic matrix. Measurements of different physico-chemical properties of nano-emulsions were taken according to size, electrophoretic mobility, conductivity, viscosity, turbidity, cristallization and melting point. The RHLB was calculated for each formulation in order to achieve maximum stability. Both tween 80 and soya lecithin were found to stabilize formulations. The results showed that rapeseed oil and miglyol are the predominant parameters for determining the expression of results concerning the characterization of emulsion. Based on the mixture design, we achieved the optimal point using the following formulation: 56.5% rapessed oil, 35.5% miglyol, and 8% salmon oil. We considered this formulation to be the best as a nanocosmeceutical product due to the small size, good turbidity, and average HLB. This study demonstrates the influence of formulation on the physico-chemical properties of each nano-emulsion obtained by the mixture design.

  18. Nanoemulsion formulation of fisetin improves bioavailability and antitumour activity in mice.

    Science.gov (United States)

    Ragelle, Héloïse; Crauste-Manciet, Sylvie; Seguin, Johanne; Brossard, Denis; Scherman, Daniel; Arnaud, Philippe; Chabot, Guy G

    2012-05-10

    The natural flavonoid fisetin (3,3',4',7-tetrahydroxyflavone) has shown antitumour activity but its administration is complicated by its low water solubility. Our aim was to incorporate fisetin into a nanoemulsion to improve its pharmacokinetics and therapeutic efficacy. Solubility and emulsification tests allowed to develop an optimal nanoemulsion composed of Miglyol 812N/Labrasol/Tween 80/Lipoid E80/water (10%/10%/2.5%/1.2%/76.3%). The nanoemulsion had an oil droplet diameter of 153 ± 2 nm, a negative zeta potential (-28.4 ± 0.6 mV) and a polydispersity index of 0.129. The nanoemulsion was stable at 4 °C for 30 days, but phase separation occurred at 20 °C. Pharmacokinetic studies in mice revealed that the fisetin nanoemulsion injected intravenously (13 mg/kg) showed no significant difference in systemic exposure compared to free fisetin. However, when the fisetin nanoemulsion was administered intraperitoneally, a 24-fold increase in fisetin relative bioavailability was noted, compared to free fisetin. Additionally, the antitumour activity of the fisetin nanoemulsion in Lewis lung carcinoma bearing mice occurred at lower doses (36.6 mg/kg) compared to free fisetin (223 mg/kg). In conclusion, we have developed a stable nanoemulsion of fisetin and have shown that it could improve its relative bioavailability and antitumour activity. Copyright © 2012 Elsevier B.V. All rights reserved.

  19. Vitamin D3-Loaded Nanostructured Lipid Carriers as a Potential Approach for Fortifying Food Beverages; in Vitro and in Vivo Evaluation

    Directory of Open Access Journals (Sweden)

    Maryam Mohammadi

    2017-04-01

    Full Text Available Purpose: Nanostructured lipid carriers (NLCs composed of solid lipid and oil are a new generation of lipid nanoparticles which have exhibited some merits over traditional used lipid nanoparticles in fortifying food and beverages and nutraceuticals delivery systems such as liposomes and solid lipid nanoparticles. Methods: In this study, Precirol and Compritol as solid lipids, Miglyol and Octyloctanoat as liquid lipids, Tween80, Tween20 and Poloxamer407 as surfactants were used to prepare vitamin D3-loaded NLC dispersion using hot homogenization method. The particle size and size distribution for all formulations were evaluated by immediately after production and during a storage period of 60 days. Results: The Precirol-based NLC showed superiority over Compritol-based NLC in the point of physical stability. Results clearly suggested that an optimum concentration of 3% of Poloxamer407 or 2% of Tween20 was sufficient to cover the surface of nanoparticles effectively and prevent agglomeration during the homogenization process. Octyloctanoat was introduced for the first time as a good substituent for Miglyol in the preparation of NLC formulations. The vitamin D3 Intestinal absorption enhanced by the incorporating in NLCs. Conclusion: It was concluded that NLC showed a promising approach for fortifying beverages by lipophilic nutraceuticals such as vitamin D.

  20. Technology of stable, prolonged-release eye-drops containing Cyclosporine A, distributed between lipid matrix and surface of the solid lipid microspheres (SLM).

    Science.gov (United States)

    Wolska, Eliza; Sznitowska, Małgorzata

    2013-01-30

    The aim of this study was to prepare solid lipid microspheres (SLM) with incorporated Cyclosporine A (Cs), suitable for ocular application. For this purpose, SLM were formulated by using different lipids and three different nonionic surfactants. The SLM were produced using a hot emulsification method. The SLM dispersions contained 10, 20 or 30% of lipid (w/w) and up to 2% (w/w) of Cs. The size of the microspheres with Cs ranged from 1 to 15 μm. Physically stable SLM with Cs were prepared using Compritol, as a lipid matrix, and Tween 80, as a surfactant. In contrast, dispersion with Precirol alone, formed semi-solid gels during storage, while in formulations with Precirol and Miglyol, crystals of Cs were observed. In vitro release profile of Compritol formulations showed that 40% of Cs is released within 1h, while the release of the following 40% takes more time, depending on lipid content in the formulations. The large part of Cs, added to SLM formulations (from 45 to 80%), was found on the surface of microparticles, but no drug crystallization occurred during a long-term storage. Copyright © 2012 Elsevier B.V. All rights reserved.

  1. Physico-chemical characterization of nano-emulsions in cosmetic matrix enriched on omega-3

    Directory of Open Access Journals (Sweden)

    Linder Michel

    2011-09-01

    Full Text Available Abstract Background Nano-emulsions, as non-equilibrium systems, present characteristics and properties which depend not only on composition but also on their method of preparation. To obtain better penetration, nanocosmeceuticals use nano-sized systems for the delivery of active ingredients to targeted cells. In this work, nano-emulsions composed of miglyol, rapeseed oil and salmon oil were developed as a cosmetic matrix. Measurements of different physico-chemical properties of nano-emulsions were taken according to size, electrophoretic mobility, conductivity, viscosity, turbidity, cristallization and melting point. The RHLB was calculated for each formulation in order to achieve maximum stability. Results Both tween 80 and soya lecithin were found to stabilize formulations. The results showed that rapeseed oil and miglyol are the predominant parameters for determining the expression of results concerning the characterization of emulsion. Based on the mixture design, we achieved the optimal point using the following formulation: 56.5% rapessed oil, 35.5% miglyol, and 8% salmon oil. We considered this formulation to be the best as a nanocosmeceutical product due to the small size, good turbidity, and average HLB. Conclusions This study demonstrates the influence of formulation on the physico-chemical properties of each nano-emulsion obtained by the mixture design.

  2. The effect of a lipid composition and a surfactant on the characteristics of the solid lipid microspheres and nanospheres (SLM and SLN).

    Science.gov (United States)

    Sznitowska, Malgorzata; Wolska, Eliza; Baranska, Helena; Cal, Krzysztof; Pietkiewicz, Justyna

    2017-01-01

    Solid lipid microparticles (SLM) were produced by a two-step process that, firstly, involved the emulsification of the molten lipid phase in a heated aqueous phase and, secondly, the system cooling. Compritol 888 ATO and Precirol ATO 5, including their mixtures with Miglyol 812 or Witepsol H15 were used as lipid components (10-30% w/w). The average size of the SLM prepared with Compritol and Tween 80 as an emulsifier was 3-7μm and the influence of lipid concentration and thermal sterilization was not large. Dispersions of SLM with Precirol (10-20% w/w) gellified upon storage. SLM stabilized with another surfactant, Tego Care 450, were larger in size and measured 40μm on average. The use of the sonication step (5-15min) in hot formulations containing 5% w/w of Compritol resulted in the formation of the solid lipid nanoparticles (SLN) with average size 200-300nm. The smallest SLN size (below 100nm on average) was obtained in SLN that contained Tego Care and an antimicrobial agent Euxyl PE 9010; such combination evoked synergism between the surfactant and Euxyl components. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. Variables Associated with Adherence to Stress Ulcer Prophylaxis in Patients Admitted to the General Hospital Wards: A Prospective Study

    Directory of Open Access Journals (Sweden)

    Shadi Farsaei

    2017-04-01

    Full Text Available Purpose: Nanostructured lipid carriers (NLCs composed of solid lipid and oil are a new generation of lipid nanoparticles which have exhibited some merits over traditional used lipid nanoparticles in fortifying food and beverages and nutraceuticals delivery systems such as liposomes and solid lipid nanoparticles. Methods: In this study, Precirol and Compritol as solid lipids, Miglyol and Octyloctanoat as liquid lipids, Tween80, Tween20 and Poloxamer407 as surfactants were used to prepare vitamin D3-loaded NLC dispersion using hot homogenization method. The particle size and size distribution for all formulations were evaluated by immediately after production and during a storage period of 60 days. Results: The Precirol-based NLC showed superiority over Compritol-based NLC in the point of physical stability. Results clearly suggested that an optimum concentration of 3% of Poloxamer407 or 2% of Tween20 was sufficient to cover the surface of nanoparticles effectively and prevent agglomeration during the homogenization process. Octyloctanoat was introduced for the first time as a good substituent for Miglyol in the preparation of NLC formulations. The vitamin D3 Intestinal absorption enhanced by the incorporating in NLCs. Conclusion: It was concluded that NLC showed a promising approach for fortifying beverages by lipophilic nutraceuticals such as vitamin D.

  4. PENGEMBANGAN SISTEM NANOSTRUCTURED LIPID CARRIERS (NLC MELOXICAM DENGAN LIPID MONOSTEARIN DAN MIGLYOL 808 MENGGUNAKAN METODE EMULSIFIKASI

    Directory of Open Access Journals (Sweden)

    Rahmi Annisa

    2016-06-01

    Full Text Available The aim this study was to determine the effect of Monostearin and Miglyol 808 lipid ratio in NLC system formulation resulting in physicochemical characteristics, release rate, and penetration rate. The NLC making was done by using emulsification method. In the formulation of NLC meloxicam, 3 different lipid ratios were used, including ratios of 6:4, 7:3, 8:2.  Meloxicam served as active ingredient, monostearin served as solid lipid, miglyol 808 served as a liquid lipid, and tween 80 was surfactant. NLC meloxicam physicochemical characteristics include tests of organoleptic, pH, viscosity, particle size, particle morphology and entrapment efficiency. NLC meloxicam belongs to semisolid preparations with pH value range of 5,72-5,87. Increasing viscosity of NLC system are cause by increase of solid lipid. The measurement results of particle size of three different lipid formulas indicated that the lipid particle size was 80%. The determination of release rate (flux and penetration rate (flux was conducted by using Franz diffusion cells with a cellophane membrane for the release and Wistar rat’s skin membrane for the penetration. The release rate values of three NLC meloxicam formulas showed p value (sig 0,005, while the penetration rate obtained p value (sig 0,091. Keywords: NLC, meloxicam, physicochemical characterization, release rate and penetration rate

  5. Vitamin D3-Loaded Nanostructured Lipid Carriers as a Potential Approach for Fortifying Food Beverages; in Vitro and in Vivo Evaluation.

    Science.gov (United States)

    Mohammadi, Maryam; Pezeshki, Akram; Mesgari Abbasi, Mehran; Ghanbarzadeh, Babak; Hamishehkar, Hamed

    2017-04-01

    Purpose: Nanostructured lipid carriers (NLCs) composed of solid lipid and oil are a new generation of lipid nanoparticles which have exhibited some merits over traditional used lipid nanoparticles in fortifying food and beverages and nutraceuticals delivery systems such as liposomes and solid lipid nanoparticles. Methods: In this study, Precirol and Compritol as solid lipids, Miglyol and Octyloctanoat as liquid lipids, Tween80, Tween20 and Poloxamer407 as surfactants were used to prepare vitamin D 3 -loaded NLC dispersion using hot homogenization method. The particle size and size distribution for all formulations were evaluated by immediately after production and during a storage period of 60 days. Results: The Precirol-based NLC showed superiority over Compritol-based NLC in the point of physical stability. Results clearly suggested that an optimum concentration of 3% of Poloxamer407 or 2% of Tween20 was sufficient to cover the surface of nanoparticles effectively and prevent agglomeration during the homogenization process. Octyloctanoat was introduced for the first time as a good substituent for Miglyol in the preparation of NLC formulations. The vitamin D 3 Intestinal absorption enhanced by the incorporating in NLCs. Conclusion: It was concluded that NLC showed a promising approach for fortifying beverages by lipophilic nutraceuticals such as vitamin D.

  6. Promising ion-sensitive in situ ocular nanoemulsion gels of terbinafine hydrochloride: design, in vitro characterization and in vivo estimation of the ocular irritation and drug pharmacokinetics in the aqueous humor of rabbits.

    Science.gov (United States)

    Tayel, Saadia Ahmed; El-Nabarawi, Mohamed Ahmed; Tadros, Mina Ibrahim; Abd-Elsalam, Wessam Hamdy

    2013-02-25

    Terbinafine hydrochloride (T-HCl) is recommended for the management of fungal keratitis. To maintain effective aqueous humor concentrations, frequent instillation of T-HCl drops is necessary. This work aimed to develop alternative controlled-release in situ ocular drug-loaded nanoemulsion (NE) gels. Twelve pseudoternary-phase diagrams were constructed using oils (isopropyl myristate/Miglyol 812), surfactants (Tween 80/Cremophor EL), a co-surfactant (polyethylene glycol 400) and water. Eight drug-loaded (0.5%, w/v) NEs were evaluated for thermodynamic stability, morphology, droplet size and drug release in simulated tear fluid (pH 7.4). Following dispersion in gellan gum solution (0.2%, w/w), the in situ NE gels were characterized for transparency, rheological behavior, mucoadhesive force, drug release and histopathological assessment of ocular irritation. Drug pharmacokinetics of sterilized F31 [Miglyol 812, Cremophor EL: polyethylene glycol 400 (1:2) and water (5, 55 and 40%, w/w, respectively)] in situ NE gel and oily drug solution were evaluated in rabbit aqueous humor. The NEs were thermodynamically stable and have spherical droplets (<30 nm). The gels were transparent, pseudoplastic, mucoadhesive and showed more retarded zero-order drug release rates. F31 in situ NE gel showed the least ocular irritation potential and significantly (P<0.01) higher C(max), delayed T(max), prolonged mean residence time and increased bioavailability. Copyright © 2013 Elsevier B.V. All rights reserved.

  7. Extra-cellular isoamylase production by Rhizopus oryzae in solid-state fermentation of agro wastes

    Directory of Open Access Journals (Sweden)

    Barnita Ghosh

    2011-10-01

    Full Text Available Extra-cellular isoamylase was produced by Rhizopus oryzae PR7 in solid-state fermentations of various agro wastes, among which millet, oat, tapioca, and arum (Colocasia esculenta showed promising results. The highest amount of enzyme production was obtained after 72 h of growth at 28°C. The optimum pH for enzyme production was - 8.0. Among the various additives tested, enzyme production increased with ions such as Ca2+, Mg2+ and also with cysteine, GSH, and DTT. The enzyme synthesis was reduced in the presence of thiol inhibitors like Cu2+ and pCMB. The surfactants like Tween-40, Tween-80 and Triton X-100 helped in enhancing the enzyme activity. The production could be further increased by using the combinations of substrates. The ability to produce high amount of isoamylase within a relatively very short period and the capability of degrading wastes could make the strain suitable for commercial production of the enzyme.

  8. Possible modulation of the antidiabetic effect of rosiglitazone by buspirone

    Directory of Open Access Journals (Sweden)

    Wafaa R. Mohamed

    2012-06-01

    Full Text Available Diabetes mellitus (DM is a group of metabolic disorders characterized by chronic hyperglycemia resulting from relative or absolute insulin deficiency with or without insulin resistance. As anxiolytics may have influence on glycemic control in diabetics, the present study was conducted to investigate the possible influence of buspirone in streptozotocin-induced DM and its possible interactions with rosiglitazone, an insulin sensitizer. Diabetes was induced by streptozotocin (50 mg/kg i.p.. Rats were classified into five groups namely: normal control, diabetic control, rosiglitazone (10 mg/kg p.o., buspirone (20 mg/kg i.p. or combination of both rosiglitazone and buspirone, respectively. All groups received daily treatments for 2 weeks after induction of DM including the normal group which received 1% Tween 80. There was no significant interaction between rosiglitazone and buspirone on the levels of serum glucose, insulin and C-peptide or liver glycogen content. Similarly, no interaction was observed between rosiglitazone and buspirone on oxidative stress parameters including serum malondialdehyde and blood glutathione levels or blood superoxide dismutase activity. In conclusion, the present study revealed that co-administration of buspirone with rosiglitazone does not produce serious reactions and buspirone can be safely administered as an anxiolytic in diabetic patients treated with rosiglitazone.

  9. Solid lipid nanoparticles carrying chemotherapeutic drug across the blood-brain barrier through insulin receptor-mediated pathway.

    Science.gov (United States)

    Kuo, Yung-Chih; Shih-Huang, Chun-Yuan

    2013-09-01

    Carmustine (BCNU)-loaded solid lipid nanoparticles (SLNs) were grafted with 83-14 monoclonal antibody (MAb) (83-14 MAb/BCNU-SLNs) and applied to the brain-targeting delivery. Human brain-microvascular endothelial cells (HBMECs) incubated with 83-14 MAb/BCNU-SLNs were stained to demonstrate the interaction between the nanocarriers and expressed insulin receptors (IRs). The results revealed that the particle size of 83-14 MAb/BCNU-SLNs decreased with an increasing weight percentage of Dynasan 114 (DYN). Storage at 4 °C for 6 weeks slightly deformed the colloidal morphology. In addition, poloxamer 407 on 83-14 MAb/BCNU-SLNs induced cytotoxicity to RAW264.7 cells and inhibited phagocytosis by RAW264.7 cells. An increase in the weight percentage of DYN from 0% to 67% slightly reduced the viability of RAW264.7 cells and promoted phagocytosis. Moreover, the transport ability of 83-14 MAb/BCNU-SLNs across the blood-brain barrier (BBB) in vitro enhanced with an increasing weight percentage of Tween 80. 83-14 MAb on MAb/BCNU-SLNs stimulated endocytosis by HBMECs via IRs and enhanced the permeability of BCNU across the BBB. 83-14 MAb/BCNU-SLNs can be a promising antitumor drug delivery system for transporting BCNU to the brain.

  10. Production of solid lipid submicron particles for protein delivery using a novel supercritical gas-assisted melting atomization process.

    Science.gov (United States)

    Salmaso, Stefano; Elvassore, Nicola; Bertucco, Alberto; Caliceti, Paolo

    2009-02-01

    A supercritical carbon dioxide micronization technique based on gas-assisted melting atomization has been designed to prepare protein-loaded solid lipid submicron particles. The supercritical process was applied to homogeneous dispersions of insulin in lipid mixtures: (1) tristearin, Tween-80, phosphatidylcholine and 5 kDa PEG (1:0.1:0.9:1 and 1:0.1:0.9:2 weight ratio); and (2) tristearin, dioctyl sulfosuccinate and phosphatidylcholine (1:1:0.5 weight ratio). Optimized process conditions yielded dry nonagglomerated powders with high product recovery (70%, w/w). Dynamic light scattering and transmission electron microscopy showed that two size fractions of particles, with 80-120 and 200-400 nm diameters, were produced. In all final products, dimethylsulfoxide used to prepare the insulin/lipid mixture was below 20 ppm. Protein encapsulation efficiency increased up to 80% as the DMSO content in the insulin/lipid mixture increased. Compared to the particles without PEG, the polymer-containing particles dispersed rapidly in water, and the dispersions were more stable under centrifugation as less than 20% of suspended particles precipitated after extensive centrifugation. In vitro, the protein was slowly released from the formulation without PEG, while a burst and faster release were obtained from the formulations containing PEG. Subcutaneous injection to diabetic mice of insulin extracted from the particles showed that the supercritical process did not impair the protein hypoglycemic activity.

  11. Antitrypanosomal effect of methanolic extract of Zingiber officinale (ginger on Trypanosoma brucei brucei-infected Wistar mice

    Directory of Open Access Journals (Sweden)

    P. I. Kobo

    2014-10-01

    Full Text Available Aim: The study was carried out to determine the in vivo antitrypanosomal effect of methanolic extract of Zingiber officinale (ginger in Trypanosoma brucei brucei-infected mice. Materials and Methods: Twenty-five mice were randomly allocated into five groups of five animals each. Group I and II were given Tween 80 (1 ml/kg and diminazene aceturate (3.5 mg/kg to serve as untreated and treated controls, respectively. Groups III-V received the extract at 200, 400 and 800 mg/kg body weight, respectively. All treatments were given for 6 consecutive days and through the oral route. The mean body weight, mean survival period and daily level of parasitaemia were evaluated. Results: Acute toxicity showed the extract to be relatively safe. There was an insignificant increase in body weight and survival rate of mice treated with the extract. The level of parasitaemia in the extract treated groups was decreased. Conclusion: This study shows the in vivo potential of methanolic extract of Z. officinale in the treatment of trypanosomiasis.

  12. Sterile Reverse Osmosis Water Combined with Friction Are Optimal for Channel and Lever Cavity Sample Collection of Flexible Duodenoscopes

    Directory of Open Access Journals (Sweden)

    Michelle J. Alfa

    2017-11-01

    Full Text Available IntroductionSimulated-use buildup biofilm (BBF model was used to assess various extraction fluids and friction methods to determine the optimal sample collection method for polytetrafluorethylene channels. In addition, simulated-use testing was performed for the channel and lever cavity of duodenoscopes.Materials and methodsBBF was formed in polytetrafluorethylene channels using Enterococcus faecalis, Escherichia coli, and Pseudomonas aeruginosa. Sterile reverse osmosis (RO water, and phosphate-buffered saline with and without Tween80 as well as two neutralizing broths (Letheen and Dey–Engley were each assessed with and without friction. Neutralizer was added immediately after sample collection and samples concentrated using centrifugation. Simulated-use testing was done using TJF-Q180V and JF-140F Olympus duodenoscopes.ResultsDespite variability in the bacterial CFU in the BBF model, none of the extraction fluids tested were significantly better than RO. Borescope examination showed far less residual material when friction was part of the extraction protocol. The RO for flush-brush-flush (FBF extraction provided significantly better recovery of E. coli (p = 0.02 from duodenoscope lever cavities compared to the CDC flush method.Discussion and conclusionWe recommend RO with friction for FBF extraction of the channel and lever cavity of duodenoscopes. Neutralizer and sample concentration optimize recovery of viable bacteria on culture.

  13. Surfactant assisted disperser pretreatment on the liquefaction of Ulva reticulata and evaluation of biodegradability for energy efficient biofuel production through nonlinear regression modelling.

    Science.gov (United States)

    Kumar, M Dinesh; Tamilarasan, K; Kaliappan, S; Banu, J Rajesh; Rajkumar, M; Kim, Sang Hyoun

    2018-05-01

    The present study aimed to increase the disintegration potential of marine macroalgae, (Ulva reticulata) through chemo mechanical pretreatment (CMP) in an energy efficient manner. By combining surfactant with disperser, the specific energy input was considerably reduced from 437.1 kJ/kg TS to 264.9 kJ/kg TS to achieve 10.7% liquefaction. A disperser rpm (10,000), pretreatment time (30 min) and tween 80 dosage (21.6 mg/L) were considered as an optimum for effective liquefaction of algal biomass. CMP was designated as an appropriate pretreatment resulting in a higher soluble organic release 1250 mg/L, respectively. Anaerobic fermentation results revealed that the volatile fatty acid (VFA) concentration was doubled (782 mg/L) in CMP when compared to mechanical pretreatment (MP) (345 mg/L). CMP pretreated algal biomass was considered as the suitable for biohydrogen production with highest H 2 yield of about 63 mL H 2 /g COD than (MP) (45 mL H 2 /g COD) and control (10 mL H 2 /g COD). Copyright © 2018 Elsevier Ltd. All rights reserved.

  14. Modulation of the wettability of excipients by surfactant and its impacts on the disintegration and release of tablets.

    Science.gov (United States)

    Yang, Baixue; Xu, Lu; Wang, Qiuxiao; Li, Sanming

    2016-12-01

    To investigate the modulation of the wettability of excipients by different types of surfactants and its impacts on the disintegration of tablets and drug release. The critical micelle concentration (CMC) of surfactants, including sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS), dodecyl trimethyl ammonium bromide (DTAB), cetyltrimethyl ammonium bromide (CTAB) and polysorbate (Tween-20 and Tween-80), was obtained using the platinum ring method. Contact angles of surfactant solutions on the excipient compacts and double-distilled water on the mixture of surfactant and the other excipient (magnesium stearate (MgSt) or sodium alginate (SA)) were measured by the sessile drop technique. Besides, surface free energy of excipients was calculated by the Owens method. Finally, the disintegration of tablets and in vitro dissolution testing were performed according to the method described in USP. The wettability of excipients could be enhanced to different extent with low concentration of surfactant solutions and maintained stable basically after CMC. For MgSt (hydrophobic excipient), the shorter the hydrophobic chain (C 12 , including SDS and DTAB), the better the wettability with the addition of surfactant in the formulation, leading to the shorter disintegration time of tablets and higher drug release rate. In contrast, the wettability of SA (hydrophilic excipient) was reduced by adding surfactant, resulting in the longer disintegration time of tablets and lower release rate. The modulation of the wetting of pharmaceutical excipients by surfactant had changed the disintegration time of tablets and drug release rate to a greater extent.

  15. Microstructure characterization of a food-grade U-type microemulsion system by differential scanning calorimetry and electrical conductivity techniques.

    Science.gov (United States)

    Zhang, Hui; Taxipalati, Maierhaba; Que, Fei; Feng, Fengqin

    2013-12-01

    The microstructure transitions of a food-grade U-type microemulsion system containing glycerol monolaurate and propionic acid at a 1:1 mass ratio as oil phase and Tween 80 as surfactant were investigated along a water dilution line at a ratio of 80:20 mass% surfactant/oil phase, based on a previously studied phase diagram. From the water thermal behaviours detected by differential scanning calorimetry, three structural regions are identified along the dilution line. In the first region, all water molecules are confined to the water core of the reverse micelles, leading to the formation of w/o microemulsion. As the water content increases, the water gains mobility, transforms into bicontinuous in the second region, and finally the microemulsion become o/w in the third region. The thermal transition points coincide with the structural phase transitions by electrical conductivity measurements, indicating that the structural transitions occur at 35 and 65 mass% of water along the dilution line. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Effects of concentration, head group, and structure of surfactants on the degradation of phenanthrene

    International Nuclear Information System (INIS)

    Jin Danyue; Jiang Xia; Jing Xin; Ou Ziqing

    2007-01-01

    The effects of concentration, polar/ionic head group, and structure of surfactants on the biodegradation of polycyclic aromatic hydrocarbons (PAHs) in the aqueous phase, as well as their effects on the bacterial activity were investigated. The toxicity ranking of studied surfactants is: non-ionic surfactants (Tween 80, Brij30, 10LE and Brij35) -1 ) served the sole carbon and energy resource. However, the degradation of 14 C-phenanthrene showed either a decrease or no obvious change with the surfactants present at all tested concentrations (5-40 mg L -1 ). Thus, the surfactant addition is not beneficial to the removal of phenanthrene or other PAH contaminants due presumably to the preferential utilization of surfactants at low levels as the non-toxic nutrient resource and to the high toxicity of the surfactants at high levels to the microorganism activity. Biodegradation of phenanthrene was also influenced by the surfactant concentration, head group type, and structure. Much more research has yet to be completed on the use of surfactants for soil remediation due to the surfactant toxicity or biodegradation effect

  17. Formulation of vitamin D encapsulated cinnamon oil nanoemulsion: Its potential anti-cancerous activity in human alveolar carcinoma cells.

    Science.gov (United States)

    Meghani, Nikita; Patel, Pal; Kansara, Krupa; Ranjan, Shivendu; Dasgupta, Nandita; Ramalingam, Chidambaram; Kumar, Ashutosh

    2018-06-01

    Cinnamon oil is used for medicinal purpose since ancient time because of its antioxidant activity. Oil-in-water nanoemulsion (NE) of cinnamon oil was formulated using cinnamon oil, nonionic surfactant Tween 80 and water by ultrasonication technique. Phase diagram was constructed to investigate the influence of oil, water and surfactant concentration. Vitamin D encapsulated cinnamon oil NE was fabricated by wash out method followed by ultrasonication in similar fashion. The hydrodynamic size of cinnamon oil NE and vitamin D encapsulated cinnamon oil NE was observed as 40.52 and 48.96 nm in complete DMEM F12 media respectively. We focused on the cytotoxic and genotoxic responses of NEs in A549 cells in concentration dependent manner. We observed that both NEs induce DNA damage along with corresponding increase in micronucleus frequency that is evident from the comet and CBMN assay. Both the NEs arrested the cell cycle progression in G0/G1 phase, showed increased expression of Bax, capase-3 and caspase-9 and decrease expression of BcL2 proteins along with significant (p oil as carrier for lipophilic nutraceutical like vitamin D. Copyright © 2018 Elsevier B.V. All rights reserved.

  18. Microemulsion-Based Topical Hydrogels of Tenoxicam for Treatment of Arthritis.

    Science.gov (United States)

    Goindi, Shishu; Narula, Manleen; Kalra, Atin

    2016-06-01

    Tenoxicam (TNX) is a non-steroidal anti-inflammatory drug (NSAID) used for the treatment of rheumatoid arthritis, osteoarthritis, ankylosing spondylitis, backache and pain. However, prolonged oral use of this drug is associated with gastrointestinal adverse events like peptic ulceration, thus necessitating its development as topical formulation that could obviate the adverse effects and improve patient compliance. The present study was aimed at development of microemulsion-based formulations of TNX for topical delivery at the affected site. The pseudoternary phase diagrams were developed and microemulsion formulations were prepared using Captex 300/oleic acid as oil, Tween 80 as surfactant and n-butanol/ethanol as co-surfactant. Optimized microemulsions were characterized for drug content, droplet size, viscosity, pH and zeta potential. The ex vivo permeation studies through Laca mice skin were performed using Franz diffusion cell assembly, and the permeation profile of the microemulsion formulation was compared with aqueous suspension of drug and drug incorporated in conventional cream. Microemulsion formulations of TNX showed significantly higher (p Microemulsion formulations were found to be superior in controlling inflammation as compared to conventional topical dosage forms and showed efficacy equivalent to oral formulation. Results suggest that the developed microemulsion formulations may be used for effective topical delivery of TNX to treat various inflammatory conditions.

  19. PREPARATION AND PROPERTIES OF COMPOUND ARNEBIAE RADIX MICROEMULSION GEL.

    Science.gov (United States)

    Chen, Jing; He, Yanping; Gao, Ting; Zhang, Licheng; Zhao, Yuna

    2017-01-01

    Compound Arnebiae radix oil has been clinically applied to treat burns and scalds for a long time. However, it is unstable and inconvenient to use. The aim of this study was to prepare a compound Arnebiae radix microemulsion gel for transdermal delivery system and evaluate its characteristics. Based on the solubility of Shikonin, the active component of Arnebiae radix and the results of phase studies, adequate ratio of each component in microemulsion was determined. The optimized microemulsion gel was prepared using Carbomer 940. The gels were characterized in terms of appearance, preliminary stability test and the content of Shikonin in the compound Arnebiae radix microemulsion gel with HPLC analysis. The optimized conditions for preparing microemulsion were Tween-80, glycerin, isopropyl myristate (IPM) with the ratio of 6:3:2. The optimal microemulsion gel was obtained with Carbomer 940 (1.0%). The prepared compound Arnebiae radix microemulsion gel showed good stability over time. It is more convenience in application than the previous used formulations.

  20. Formulation Optimization and Ex Vivo and In Vivo Evaluation of Celecoxib Microemulsion-Based Gel for Transdermal Delivery.

    Science.gov (United States)

    Cao, Mengyuan; Ren, Lili; Chen, Guoguang

    2017-08-01

    Celecoxib (CXB) is a poorly aqueous solubility sulfonamide non-steroidal anti-inflammatory drug (NSAID). Hence, the formulation of CXB was selected for solubilization and bioavailability. To find out suitable formulation for microemulsion, the solubility of CXB in triacetin (oil phase), Tween 80 (surfactant), and Transcutol-P (co-surfactant) was screened respectively and optimized by using orthogonal experimental design. The Km value and concentration of oil, S mix , and water were confirmed by pseudo-ternary phase diagram studies and central composite design. One percent carbopol 934 was added to form CXB microemulsion-based gel. The final formulation was evaluated for its appearance, pH, viscosity, stability, drug content determination, globule size, and zeta potential. Its ex vivo drug permeation and the in vivo pharmacokinetic was investigated. Further research was performed to ensure the safety and validity by skin irritation study and in vivo anti-inflammatory activity study. Ex vivo permeation study in mice was designed to compare permeation and transdermal ability between microemulsion formulation and conventional gel. The results revealed that optimized microemulsion-based gel gained higher permeation based on smaller globule size and high drug loading of microemulsion. Transdermal ability was also greatly improved. Bioavailability was compared to market Celebrex® by the in vivo pharmacokinetic study in rabbits. The results indicated that CXB microemulsion-based gel had better bioavailability than Celebrex®.

  1. Determination of in vivo behavior of mitomycin C-loaded o/w soybean oil microemulsion and mitomycin C solution via gamma camera imaging.

    Science.gov (United States)

    Kotmakçı, Mustafa; Kantarcı, Gülten; Aşıkoğlu, Makbule; Ozkılıç, Hayal; Ertan, Gökhan

    2013-09-01

    In this study, a microemulsion system was evaluated for delivery of mitomycin C (MMC). To track the distribution of the formulated drug after intravenous administration, radiochemical labeling and gamma scintigraphy imaging were used. The aim was to evaluate a microemulsion system for intravenous delivery of MMC and to compare its in vivo behavior with that of the MMC solution. For microemulsion formulation, soybean oil was used as the oil phase. Lecithin and Tween 80 were surfactants and ethanol was the cosurfactant. To understand the whole body localization of MMC-loaded microemulsion, MMC was labeled with radioactive technetium and gamma scintigraphy was applied for visualization of drug distribution. Radioactivity in the bladder 30 minutes after injection of the MMC solution was observed, according to static gamma camera images. This shows that urinary excretion of the latter starts very soon. On the other hand, no radioactivity appeared in the urinary bladder during the 90 minutes following the administration of MMC-loaded microemulsion. The unabated radioactivity in the liver during the experiment shows that the localization of microemulsion formulation in the liver is stable. In the light of the foregoing, it is suggested that this microemulsion formulation may be an appropriate carrier system for anticancer agents by intravenous delivery in hepatic cancer chemotherapy.

  2. Efficacy of nano- and microemulsion-based topical gels in delivery of ibuprofen: an in vivo study.

    Science.gov (United States)

    Azizi, Mosayeb; Esmaeili, Fariba; Partoazar, Alireza; Ejtemaei Mehr, Shahram; Amani, Amir

    2017-03-01

    Nanoemulsion has shown many advantages in drug delivery systems. In this study, for the first time, analgesic and anti-inflammatory properties of a nanomelusion of almond oil with and without ibuprofen was compared with corresponding microemulsion and commercial topical gel of the drug using formalin and carrageenan tests, respectively. Almond oil (oil phase) was mixed with Tween 80 and Span 80 (surfactants), and ethanol (co-surfactant) and them distilled water (aqueous phase) was then added to the mixture at once. Prepared nanoemulsions were pre-emulsified into a 100 ml beaker using magnet/stirrer (1000 rpm). Then, using a probe ultrasonicator (Hielscher UP400s, Hielscher, Ringwood, NJ) the nanoemulsions were formed. The optimised nanoemulsion formulation containing 2.5% ibuprofen, showed improved analgesic and anti-inflammatory effects compared with commercial product and corresponding microemulsion product containing 5% ibuprofen (i.e. twice the content of ibuprofen in the nanoemulsion) in vivo. The nanoemulsion preparation showed superior analgesic activities during chronic phase. Also, it decreased the inflammation from the first hour, while the microemulsion and the commercial product started to show their anti-inflammatory effects after 2 and 3 h, respectively. Our finding suggests that the size of the emulsion particles must be considered as an important factor in topical drug delivery systems.

  3. Evaluation of nicotinamide microemulsion on the skin penetration enhancement.

    Science.gov (United States)

    Boonme, Prapaporn; Boonthongchuay, Chalida; Wongpoowarak, Wibul; Amnuaikit, Thanaporn

    2016-01-01

    This study purposed to evaluate a microemulsion containing nicotinamide for its characteristics, stability, and skin penetration and retention comparing with a solution of nicotinamide in 2:1 mixture of water and isopropyl alcohol (IPA). The microemulsion system was composed of 1:1 mixture of Span80 and Tween80 as a surfactant mixture, isopropyl palmitate (IPP) as an oil phase, and 2:1 mixture of water and IPA as an aqueous phase. Nicotinamide microemulsion was prepared by dissolving the active in the aqueous phase before simply mixing with the other components. It was determined for its characteristics and stability under various conditions. The skin penetration and retention studies of nicotinamide microemulsion and solution were performed by modified Franz diffusion cells, using newborn pig skin as the membrane. The results showed that nicotinamide microemulsion could be obtained as clear yellowish liquid, was water-in-oil (w/o) type, possessed Newtonian flow, and exhibited physicochemical stability when kept at 4 °C and room temperature (≈30 ± 2 °C) during 3 months. From the skin penetration data, the microemulsion could enhance the skin penetration of nicotinamide comparing with the solution. Additionally, nicotinamide microemulsion could provide much higher amount of skin retention than that of skin penetration, resulting in suitability for a cosmeceutical product.

  4. Preparation and Evaluation of Tretinoin Microemulsion Based on Pseudo-Ternary Phase Diagram

    Directory of Open Access Journals (Sweden)

    Fatemeh Leis

    2012-06-01

    Full Text Available Purpose: The aim of the present research was to formulate a transparent microemolsion as a topical delivery system for tretinoin for the treatment of acne. Methods: Microemulsion formulations prepared by mixing appropriate amount of surfactant including Tween 80 and Labrasol, co-surfactant such as propylene glycol (PG and oil phase including isopropyl myristate – transcutol P (10:1 ratio. The prepared microemolsions were evaluated regarding their particle size, zeta potential, conductivity, stability, viscosity, differential scanning calorimetry (DSC, scanning electron microscopy (SEM, refractory index (RI and pH. Results: The results showed that maximum oil was incorporated in microemolsion system that was contained surfactant to co-surfactant ratio (Km of 4:1. The mean droplets size range of microemulsion formulation were in the range of 14.1 to 36.5 nm and its refractory index (RI and pH were 1.46 and 6.1, respectively. Viscosity range was 200-350 cps. Drug release profile showed 49% of the drug released in the first 8 hours of experiment belong to ME-7. Also, Hexagonal and cubic structures were seen in the SEM photograph of the microemulsions. Conclusion: physicochemical properties and in vitro release were dependent upon the contents of S/C, water and, oil percentage in formulations.Also, ME-7 may be preferable for topical tretinoin formulation.

  5. Polycaprolactone nanofibres loaded with 20(S)-protopanaxadiol for in vitro and in vivo anti-tumour activity study

    Science.gov (United States)

    Liu, Dan-qing; Cheng, Zhi-qiang; Feng, Qing-jie; Li, He-jie; Ye, Shu-feng

    2018-01-01

    In this work, 20(S)-protopanaxadiol (PPD)-loaded polycaprolactone (PCL) nanofibres were successfully fabricated by the electrospinning technique using Tween 80 as a solubilizer. Firstly, smooth and continuous nanofibres were collected using suitable solvents and appropriate spinning conditions. Secondly, nanofibre mats were characterized by scanning electron microscopy, thermogravimetric (TG) analysis, Fourier transform infrared spectroscopy and mechanical testing. Finally, nanofibrous membranes were evaluated using water contact angle, in vitro drug release, biodegradation test, in vitro and in vivo anti-tumour activity and cell apoptosis assay. Scanning electron microscopic observations indicated that the diameter of the drug-loaded nanofibres increased with the increase of drug concentration. TG analysis and mechanical test showed that nanofibres were equipped with great thermal and mechanical properties. Biodegradation test exhibited that the structure of fabricated nanofibres had a certain degree of change after 15 days. An in vitro release study showed that PPD from drug-loaded nanofibres could be released in a sustained and prolonged mode. The cytotoxic effect of drug-loaded nanofibre mats examined on human laryngeal carcinoma cells (Hep-2 cells) demonstrated that the prepared nanofibres had a remarkable anti-tumour effect. Meanwhile, the drug-loaded fibre mats showed a super anti-tumour effect in an in vivo anti-tumour study. All in all, PCL nanofibres could be a potential carrier of PPD for cancer treatment. PMID:29892448

  6. Development of lycopene micelle and lycopene chylomicron and a comparison of bioavailability

    International Nuclear Information System (INIS)

    Chen, Yi Jyun; Inbaraj, Baskaran Stephen; Chen, Bing Huei; Pu, Yeong Shiau

    2014-01-01

    The objectives of this study were to develop lycopene micelles and lycopene chylomicrons from tomato extracts for the enhancement and comparison of bioavailability. Lycopene micelles and chylomicrons were prepared by a microemulsion technique involving tomato extract, soybean oil, water, vitamin E and surfactant Tween 80 or lecithin in different proportions. The encapsulation efficiency of lycopene was 78% in micelles and 80% in chylomicrons, with shape being roughly spherical and mean particle size being 7.5 and 131.5 nm. A bioavailability study was conducted in rats by both gavage and i.v. administration, with oral bioavailability of lycopene, phytoene and phytofluene being 6.8, 4.3 and 3.1% in micelles and 9.5, 9.4 and 7.1% in chylomicrons, respectively. This outcome reveals higher lycopene bioavailability through incorporation into micelle or chylomicron systems. Both size and shape should be considered for oral bioavailability determination. For i.v. injection, lycopene micelles should be more important than lycopene chylomicrons for future clinical applications. (paper)

  7. Development of Organogel-Derived Capsaicin Nanoemulsion with Improved Bioaccessibility and Reduced Gastric Mucosa Irritation.

    Science.gov (United States)

    Lu, Muwen; Cao, Yong; Ho, Chi-Tang; Huang, Qingrong

    2016-06-15

    Capsaicin (CAP) is the major active component in chili peppers with health-promoting benefits. However, the low bioavailability and irritating quality of CAP greatly limit its applications in functional foods. The objective of this study was to develop a food-grade nanoemulsion to increase the dissolution and bioaccessibility of CAP and to alleviate its irritating effects. To achieve this goal, CAP was first dissolved in medium-chain triacylglycerol (MCT), followed by the addition of sucrose stearate S-370 as organogelator to develop CAP-loaded organogel. The oil-in-water (O/W) emulsion was formed using organogel as the oil phase and Tween 80 as the emulsifier. After ultrasonication treatment, droplet sizes of emulsion were decreased to 168 nm with enhanced dissolution rate and bioaccessibility. In vivo study further confirmed the reduced rat gastric mucosa irritation caused by CAP. The organogel-derived nanoemulsion was proved to be an effective delivery system for CAP-based functional food products.

  8. Ultradeformable Liposomes: a Novel Vesicular Carrier For Enhanced Transdermal Delivery of Procyanidins: Effect of Surfactants on the Formation, Stability, and Transdermal Delivery.

    Science.gov (United States)

    Chen, Rencai; Li, Rongli; Liu, Qian; Bai, Chao; Qin, Benlin; Ma, Yue; Han, Jing

    2017-07-01

    The aims of this work were to develop a novel vesicular carrier, procyanidins, ultradeformable liposomes (PUDLs), to expand the applications for procyanidins, and increase their stability and transdermal delivery. In this study, we prepared procyanidins ultradeformable liposomes using thin film hydration method and evaluated their encapsulation efficiency, vesicle deformability, storage stability, and skin permeation in vitro. The influence of different surfactants on the properties of PUDLs was also investigated. The results obtained showed that the PUDLs containing Tween 80 had a high entrapment efficiency (80.27 ± 0.99%), a small particle size (140.6 ± 19 nm), high elasticity, and prolonged drug release. Compared with procyanidins solution, the stability of procyanidins in PUDLs improved significantly when stored at 4, 25, and 30°C. The penetration rate of PUDLs was 6.25-fold greater than that of procyanidins solution. Finally, the results of our study suggested that PUDLs could increase the transdermal flux, prolong the release and improve the stability of procyanidins, and could serve as an effective dermal delivery system for procyanidins.

  9. Functionalities of chitosan conjugated with stearic acid and gallic acid and application of the modified chitosan in stabilizing labile aroma compounds in an oil-in-water emulsion.

    Science.gov (United States)

    Yang, Tsung-Shi; Liu, Tai-Ti; Lin, I-Hwa

    2017-08-01

    The aims of this research were to conjugate chitosan (CT) with stearic acid (SA) and gallic acid (GA), and apply the modified chitosan to stabilize labile aroma compounds such as allyl isothiocyanate (AITC) and limonene in oil-in-water emulsions. Generally, the antioxidant activity of CT-SA-GA increased as the GA content in the conjugate increased. In most assays, GA had a lower IC 50 value than that of CT-SA-GA; however, CT-SA-GA exhibited better performance than GA in the Fe 2+ -chelating activity. In accelerated tests (heating or illumination) for evaluating the chemical stability of AITC and limonene during storage, CT-SA and CT-SA-GA were used to prepare AITC and limonene O/W emulsions, respectively. Tween 80 and Span 80 (T-S-80), an emulsifier mixture, were used as a control in both emulsions for comparison. The results show that CT-SA or CT-SA-GA could protect AITC or limonene from degradation or oxidation more effectively than T-S-80. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. An ionic liquid-in-water microemulsion as a potential carrier for topical delivery of poorly water soluble drug: Development, ex-vivo and in-vivo evaluation.

    Science.gov (United States)

    Goindi, Shishu; Kaur, Ramanpreet; Kaur, Randeep

    2015-11-30

    In this paper, we report an ionic liquid-in-water (IL/w) microemulsion (ME) formulation which is able to solubilize etodolac (ETO), a poorly water soluble drug for topical delivery using BMIMPF6 (1-butyl-3-methylimidazolium hexafluorophosphate) as IL, Tween 80 as surfactant and ethanol as co-surfactant. The prepared ME was characterized for physicochemical parameters, subjected to ex-vivo permeation studies as well as in-vivo pharmacodynamic evaluation. The ex-vivo drug permeation studies through rat skin was performed using Franz-diffusion cell and the IL/w based ME showed maximum mean cumulative percent permeation of 99.030±0.921% in comparison to oil-in-water (o/w) ME (61.548±1.875%) and oily solution (48.830±2.488%) of ETO. In-vivo anti-arthritic and anti-inflammatory activities of the prepared formulations were evaluated using different rodent models and the results revealed that ETO loaded IL/w based ME was found to be more effective in controlling inflammation than oily solution, o/w ME and marketed formulation of ETO. Histopathological studies also demonstrated that IL/w based ME caused no anatomical and pathological changes in the skin. Copyright © 2015 Elsevier B.V. All rights reserved.

  11. Effect of seven different additives on the properties of MR fluids

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, J Q; Zhang, J; Jing, Q [Department of Technical Support Engineering, Academy of Armored Force Engineering, Beijing 100072 (China)], E-mail: zhangjq63@yahoo.com.cn

    2009-02-01

    Magnetorheological (MR) fluids have been developed for application in semi-active magnetorheological fluid dampers and other magnetorheological fluid devices. In order to prepare special MR fluids to satisfy the demands of tracked vehicle, two different carrier fluids were chose to prepare MR fluids. Preparation of MR fluids, which are based on carriers such as special shock absorption fluid and 45 transformer oil, was finished. And characteristics of these samples were tested and analyzed. Results indicate, Tween-80 and Span-80 can improve sedimentary stability. Using 45 transformer oil instead of special shock absorption fluid as a carrier, the shear yield stress remains nearly invariable but the viscosity and the sedimentary stability are reduced. MR fluids with diameter of 2.73{mu}m show better sedimentary stability than that of the MR fluids with diameter of 2.3{mu}m, or 4.02{mu}m. Stearic acid obviously improves sedimentary stability and off-state viscosity, but don't perform an obvious function on shear yield stress. In magnetic field of 237KA/m, the shear yield stress of MR fluid based on special shock absorption fluid and 45 transformer oil is 18.34KPa, 14.26KPa, respectively.

  12. Statistical media and process optimization for biotransformation of rice bran to vanillin using Pediococcus acidilactici.

    Science.gov (United States)

    Kaur, Baljinder; Chakraborty, Debkumar

    2013-11-01

    An isolate of P. acidilactici capable of producing vanillin from rice bran was isolated from a milk product. Response Surface Methodology was employed for statistical media and process optimization for production of biovanillin. Statistical medium optimization was done in two steps involving Placket Burman Design and Central Composite Response Designs. The RSM optimized vanillin production medium consisted of 15% (w/v) rice bran, 0.5% (w/v) peptone, 0.1% (w/v) ammonium nitrate, 0.005% (w/v) ferulic acid, 0.005% (w/v) magnesium sulphate, and 0.1% (v/v) tween-80, pH 5.6, at a temperature of 37 degrees C under shaking conditions at 180 rpm. 1.269 g/L vanillin was obtained within 24 h of incubation in optimized culture medium. This is the first report indicating such a high vanillin yield obtained during biotransformation of ferulic acid to vanillin using a Pediococcal isolate.

  13. Evaluation of effects of dichloromethane fraction from Platonia insignis on pilocarpine-induced seizures

    Directory of Open Access Journals (Sweden)

    Joaquim S. da Costa Júnior

    2011-09-01

    Full Text Available The objective of present study was to evaluate the antioxidant and anticonvulsant activities of dichloromethane fraction (DMF from Platonia insignis Mart., Clusiaceae. The DMF from P. insignis (2 mg/kg was tested by intraperitoneal (i.p. to evaluate effects on lipid peroxidation level, nitrite formation, as well as on locomotor and anticonvulsant activities. Wistar rats were treated with, (saline/Tween 80 0.5%, i.p., control group, DMF (2 mg/kg, i.p., DMF group, pilocarpine (400 mg/kg, i.p., P400 group, or the combination of DMF (2 mg/kg, i.p. and pilocarpine (400 mg/kg, i.p., DMF plus P400. After the treatments all groups were observed for 24 h. In P400 group rats there was a decrease in the motor activity when compared with control group. In DMF plus P400 co-administered rats was observed an increase in motor activity when compared with P400 group. In P400 group rats there was a significant increase in lipid peroxidation and nitrite levels. In DMF plus P400 co-administered rats, antioxidant treatment significantly reduced the lipid peroxidation level and nitrite content after seizures. Previous findings strongly support the hypothesis that oxidative stress occurs in rat striatum during pilocarpine-induced seizures, and our results imply that strong neuprotective effect on this brain region could be achieved using DMF from P. insignis.

  14. EFFECT OF CULTURE MEDIUM ON BACTERIOCIN PRODUCTION BY LACTOBACILLUS RHAMNOSUS HN001 AND LACTOBACILLUS REUTERI ATCC 53608

    Directory of Open Access Journals (Sweden)

    Aguilar-Uscanga B. R.

    2013-06-01

    Full Text Available The aim of this study was to evaluate the effect of media on bacteriocin production by Lactobacillus rhamnosus HN001 and Lactobacillus reuteri ATCC 53608 using three different media: YPM, YPF and MRS supplemented with glucose and K2HPO4. The optimum temperature was 37°C and initial pH 6.5. Bacteriocin-like substances produced by tested bacteria in MRS medium supplemented with glucose and K2HPO4 exhibited a broad antimicrobial spectrum determined by well diffusion assay against indicator bacteria Listeria monocytogenes, Lactobacillus sakei, Enterococcus faecium, Lactobacillus delbrueckii, Lactobacillus acidophilus, but no antimicrobial spectrum against E. coli O157:H7, Salmonella typhimurium, Staphylococcus aureus, Bacillus cereus was detected. Bacteriocin was sensitive to protease IV, trypsin, pepsin and -amylases, but resistant to lipase. It was also resistant to detergents such as Tween 80, Triton-X and SDS. This bacteriocin was thermo-stable (resistant at 60°C, 90°C and 100°C for 30 min. Tested bacteria showed the best antimicrobial (bacteriocin-like activity after growth in MRS medium. Bacteriocin substances produced by tested bacteria showed promising thermo-stable technological properties.

  15. Recovery of surface bacteria from and surface sanitization of cantaloupes.

    Science.gov (United States)

    Barak, Jeri D; Chue, Bryan; Mills, Daniel C

    2003-10-01

    Practical, effective methods that could be implemented in a food service establishment (restaurant or delicatessen) for the surface sanitization of cantaloupes were microbiologically evaluated. Cantaloupes (Cucumis melo L. var. reticulates) were immersed in an inoculum containing Salmonella enterica serovar Poona or Pantoea agglomerans at ca. 10(4) to 10(5) CFU/ml. An efficient method for the recovery of bacteria from the cantaloupe surface was developed and validated. The method consisted of washing the entire melon with Butterfield's buffer containing 1% Tween 80 in a plastic bag placed inside a plastic pail affixed to an orbital shaker. Levels of S. enterica Poona recovered by washing the entire melon were significantly higher than those recovered by the more common laboratory method of blending the rind. P. agglomerans can be used as a non-pathogenic proxy for S. enterica Poona. A three-compartment surface sanitization method consisting of washing with an antimicrobial soap solution, scrubbing with a brush in tap water, and immersion in 150 ppm of sodium hypochlorite reduced the initial level of recoverable viable bacteria by 99.8%. When examined separately, scrubbing with a vegetable brush in tap water, washing with soap, and dipping in chlorine were found to reduce the bacterial load by 70, 80, and 90%, respectively.

  16. Draft genome of Kocuria polaris CMS 76or(T) isolated from cyanobacterial mats, McMurdo Dry Valley, Antarctica: an insight into CspA family of proteins from Kocuria polaris CMS 76or(T).

    Science.gov (United States)

    Gundlapally, Sathyanarayana Reddy; Ara, Srinivas; Sisinthy, Shivaji

    2015-10-01

    Kocuria polaris strain CMS 76or(T) is a gram-positive, orange-pigmented bacterium isolated from a cyanobacterial mat sample from a pond located in McMurdo Dry Valley, Antarctica. It is psychrotolerant, orange pigmented, hydrolyses starch and Tween 80 and reduces nitrate. We report the 3.78-Mb genome of K. polaris strain CMS 76or(T), containing 3416 coding sequences, including one each for 5S rRNA, 23S rRNA, 16S rRNA and 47 tRNA genes, and the G+C content of DNA is 72.8%. An investigation of Csp family of proteins from K. polaris strain CMS 76or(T) indicated that it contains three different proteins of CspA (peg.319, peg.2255 and 2832) and the length varied from 67 to 69 amino acids. The three different proteins contain all the signature amino acids and two RNA binding regions that are characteristic of CspA proteins. Further, the CspA from K. polaris strain CMS 76or(T) was different from CspA of four other species of the genus Kocuria, Cryobacterium roopkundense and E. coli indirectly suggesting the role of CspA of K. polaris strain CMS 76or(T) in psychrotolerant growth of the bacterium.

  17. Characterization and properties of biosurfactants produced by a newly isolated strain Bacillus methylotrophicus DCS1 and their applications in enhancing solubility of hydrocarbon.

    Science.gov (United States)

    Jemil, Nawel; Ben Ayed, Hanen; Hmidet, Noomen; Nasri, Moncef

    2016-11-01

    Six biosurfactant-producing bacteria were isolated from hydrocarbon contaminated soils in Sfax, Tunisia. Isolates were screened for biosurfactant production by different conventional methods including hemolytic activity, surface tension reduction, drop-collapsing and oil displacement tests. All these screening tests show that all the isolates behave differently. Among the isolated bacteria, DCS1 strain was selected for further studies based on its highest activities and it was identified as Bacillus methylotrophicus DCS1. This strain was found to be a potent producer of biosurfactant when cultivated in mineral-salts medium supplemented with diesel oil (2 %, v/v) as a sole carbon source. Physicochemical properties and stability of biosurfactants synthesized by B. methylotrophicus DCS1 were investigated. The produced biosurfactants DCS1, from Landy medium, possess high surface activity that could lower the surface tension of water to a value of 31 from 72 mN m(-1) and have a critical micelle concentration (CMC) of 100 mg L(-1). Compared with SDS and Tween 80, biosurfactants showed excellent emulsification activities against different hydrocarbon substrates and high solubilization efficiency towards diesel oil. Biosurfactants DCS1 showed good stability in a wide range of temperature, pH and salinity. These results suggested that biosurfactants produced by B. methylotrophicus DCS1 could be an alternative to chemically synthesized surfactants for use in bioremediation processes to enhance the solubility of hydrophobic compounds.

  18. Biosurfactants from Acinetobacter calcoaceticus BU03 enhance the solubility and biodegradation of phenanthrene.

    Science.gov (United States)

    Zhao, Zhenyong; Wong, Jonathan W C

    2009-03-01

    A thermophilic bacterial strain, Acinetobacter calcoaceticus BU03, with a biosurfactant-producing capability, was isolated from petroleum-contaminated soil with an improved procedure which employed the solubilization of polycyclic aromatic hydrocarbons (PAHs), i.e. naphthalene in agar plate, as a selection criterion. Crude biosurfactant was recovered from the culture of BU03 by extraction with n-hexane, and its properties were investigated. Biosurfactants from A. calcoaceticus BU03 constitute a thermo-stable mixture, composed of different agents with surface activities. At their critical micelle concentration (CMC) of 152.4 mg L(-1), the crude biosurfactants produced from A. calcoaceticus BU03 decreased the air-water surface tension to 38.4 mN m(-1). In thermophilic conditions, the emulsifying activity is 2.8 times that of Tween 80. The effects of the biosurfactants produced by A. calcoaceticus on the solubility and biodegradation of PAHs were investigated in batch systems. Biosurfactants produced by A. calcoaceticus BU03 at 25 times their CMC significantly increased the apparent aqueous solubility of phenanthrene (PHE), pyrene (PYR) and benzo(a)pyrene (B[a]P) to 54.3, 6.33 and 2.08 mg L(-1), respectively. In aqueous system, the biosurfactants at concentrations of 0.5 CMC and 1 CMC slightly enhanced the biodegradation of PHE by a consortium of PAH-degrading microrganisms. Results indicate that biosurfactants from A. calcoaceticus BU03 have potential to enhance the removal of PAHs from contaminated sites.

  19. Preparation of TPP-crosslinked chitosan microparticles by spray drying for the controlled delivery of progesterone intended for estrus synchronization in cattle.

    Science.gov (United States)

    Helbling, Ignacio M; Busatto, Carlos A; Fioramonti, Silvana A; Pesoa, Juan I; Santiago, Liliana; Estenoz, Diana A; Luna, Julio A

    2018-02-20

    Planned reproduction in cattle involves regulation of estrous cycle and the use of artificial insemination. Cycle control includes the administration of exogenous progesterone during 5-8 days in a controlled manner allowing females to synchronize their ovulation. Several progesterone delivery systems are commercially available but they have several drawbacks. The aim of the present contribution was to evaluate chitosan microparticles entrapping progesterone as an alternative system. Microparticles were prepared by spray drying. The effect of formulation parameters and experimental conditions on particle features and delivery was studied. A mathematical model to predict progesterone plasma concentration in animals was developed and validated with experimental data. Microparticle size was not affected by formulation parameters but sphericity enhances as Tween 80 content increases and it impairs as TPP content rises. Z potential decreases as phosphate content rises. Particles remain stable in acidic solution but the addition of surfactant is required to stabilize dispersions in neutral medium. Encapsulation efficiencies was 69-75%. In vitro delivery studies showed burst and diffusion-controlled phases, being progesterone released faster at low pH. In addition, delivery extend in cows was affected mainly by particle size and hormone initial content, while the amount injected altered plasma concentration. Theoretical predictions with excellent accuracy were obtained. The mathematical model developed can help to find proper particle features to reach specific delivery rates in the animals. This not only save time, money and effort but also minimized experimentation with animals which is desired from an ethical point of view.

  20. Preparation and Optimization OF Palm-Based Lipid Nanoparticles Loaded with Griseofulvin.

    Science.gov (United States)

    Huei Lim, Wen; Jean Tan, Yann; Sin Lee, Choy; Meng Er, Hui; Fung Wong, Shew

    2017-01-01

    Palm-based lipid nanoparticle formulation loaded with griseofulvin was prepared by solvent-free hot homogenization method. The griseofulvin loaded lipid nanoparticles were prepared via stages of optimisation, by altering the high pressure homogenisation (HPH) parameters, screening on palm-based lipids and Tween series surfactants and selection of lipid to surfactant ratios. A HPLC method has been validated for the drug loading capacity study. The optimum HPH parameter was determined to be 1500 bar with 5 cycles and among the palm-based lipid materials; Lipid C (triglycerides) was selected for the preparation of lipid nanoparticles. Tween 80 was chosen from the Tween series surfactants for its highest saturated solubility of griseofulvin at 53.1 ± 2.16 µg/mL. The optimum formulation of the griseofulvin loaded lipid nanoparticles demonstrated nano-range of particle size (179.8 nm) with intermediate distribution index (PDI) of 0.306, zeta potential of -27.9 mV and drug loading of 0.77%. The formulation was stable upon storage for 1 month at room temperature (25 ° C) and 45 ° C with consistent drug loading capacity.

  1. Annual risks of tuberculous infection in East Nusa Tenggara and Central Java Provinces, Indonesia.

    Science.gov (United States)

    Bachtiar, A; Miko, T Y; Machmud, R; Besral, B; Yudarini, P; Mehta, F; Chadha, V K; Basri, C; Loprang, F; Jitendra, R

    2009-01-01

    East Nusa Tenggara (NTT) and Central Java Provinces, Indonesia. To estimate the average annual risk of tuberculous infection (ARTI) among school children aged 6-9 years in each province. Children attending Classes 1-4 in 65 schools in NTT and 79 in Central Java, selected by two-stage sampling, were intradermally administered 2 tuberculin units of purified protein derivative RT23 with Tween 80 on the mid-volar aspect of the left forearm. The maximum transverse diameter of induration was measured 72 h later. The analysis was carried out among 5479 satisfactorily test-read children in NTT and 6943 in Central Java. One hundred and fifty-five new sputum smear-positive pulmonary tuberculosis (PTB) cases (78 in NTT and 77 in Central Java) were also tuberculin tested. Based on the frequency distribution of reaction sizes among the children and PTB cases, the prevalence of infection was estimated by the mirror-image method using the modes of tuberculous reactions at 15 and 17 mm. Using the 15 mm mode, ARTI was estimated at 1% in NTT and 0.9% in Central Java. Using the 17 mm mode, ARTI was estimated at 0.5% in NTT and 0.4% in Central Java. Transmission of tuberculous infection may be further reduced by intensification of tuberculosis control efforts.

  2. Development of a Lipid Particle for β-Carotene Encapsulation Using a Blend of Tristearin and Sunflower Oil: Choice of Lipid Matrix and Evaluation of Shelf Life of Dispersions

    Directory of Open Access Journals (Sweden)

    Graziela V. L. Gomes

    2013-01-01

    Full Text Available Solid lipid particles are colloidal carriers that have been studied for almost 20 years in the pharmaceutical field and recently have been investigated by food researchers due to their capacity to enhance the incorporation of lipophilic bioactives and their bioavailability in aqueous formulations. The aims of this study are to choose a suitable lipid matrix to produce solid lipid particles, which would be used to encapsulate β-carotene, and to evaluate the capacity of dispersions to protect the incorporated carotenoid. Bulk lipid mixtures of tristearin and sunflower oil were analysed by differential scanning calorimetry and wide angle X-ray diffraction, and the mixture with the highest degree of structural disorganisation was chosen. β-Carotene was then encapsulated in solid lipid particles produced with this mixture, composed of 70 % tristearin and 30 % sunflower oil (6 % total lipid and stabilised with hydrogenated soy lecithin and Tween 80 (3 % total surfactant by hot pressure homogenisation. Two types of particles were produced, using one or two passages in the homogenisation step. Average particle size, zeta potential, thermal behaviour, crystallinity and β-carotene concentration were monitored over 4 months of storage (under refrigerated conditions. The results showed minor differences between the systems in terms of size distribution, although the particles produced with one passage through the homogeniser were slightly more efficient at protecting the β-carotene from degradation and also suffered few microstructural alterations after 4 months.

  3. Characterization of a Potential Probiotic Lactobacillus brevis RK03 and Efficient Production of γ-Aminobutyric Acid in Batch Fermentation

    Directory of Open Access Journals (Sweden)

    Chien-Hui Wu

    2018-01-01

    Full Text Available Lactic acid bacteria were isolated from fish and evaluated for their γ-aminobutyric acid (GABA-producing abilities. Out of thirty-two isolates, Lactobacillus brevis RK03 showed the highest GABA production ability. The effects of various fermentation parameters including initial glutamic acid level, culture temperature, initial pH, and incubation time on GABA production were investigated via a singleparameter optimization strategy. For industrial large-scale production, a low-cost GABA producing medium (GM broth was developed for fermentation with L. brevis RK03. We found that an optimized GM broth recipe of 1% glucose; 2.5% yeast extract; 2 ppm each of CaCO3, MnSO4, and Tween 80; and 10 μM pyridoxal phosphate (PLP resulted in a maximum GABA yield of 62,523 mg/L after 88 h following the addition of 650 mM monosodium glutamate (MSG, for a conversion rate of 93.28%. Our data provide a practical approach for the highly efficient and economic production of GABA. In addition, L. brevis RK03 is highly resistant to gastric acid and bovine bile salt. Thus, the discovery of Lactobacillus strains with the ability to synthesize GABA may offer new opportunities in the design of improved health-promoting functional foods.

  4. Optimization of enzyme complexes for efficient hydrolysis of corn stover to produce glucose.

    Science.gov (United States)

    Yu, Xiaoxiao; Liu, Yan; Meng, Jiatong; Cheng, Qiyue; Zhang, Zaixiao; Cui, Yuxiao; Liu, Jiajing; Teng, Lirong; Lu, Jiahui; Meng, Qingfan; Ren, Xiaodong

    2015-05-01

    Hydrolysis of cellulose to glucose is the critical step for transferring the lignocellulose to the industrial chemicals. For improving the conversion rate of cellulose of corn stover to glucose, the cocktail of celllulase with other auxiliary enzymes and chemicals was studied in this work. Single factor tests and Response Surface Methodology (RSM) were applied to optimize the enzyme mixture, targeting maximum glucose release from corn stover. The increasing rate of glucan-to-glucose conversion got the higher levels while the cellulase was added 1.7μl tween-80/g cellulose, 300μg β-glucosidase/g cellulose, 400μg pectinase/g cellulose and 0.75mg/ml sodium thiosulphate separately in single factor tests. To improve the glucan conversion, the β-glucosidase, pectinase and sodium thiosulphate were selected for next step optimization with RSM. It is showed that the maximum increasing yield was 45.8% at 377μg/g cellulose Novozyme 188, 171μg/g cellulose pectinase and 1mg/ml sodium thiosulphate.

  5. Gum arabic based composite edible coating on green chillies

    Science.gov (United States)

    Valiathan, Sreejit; Athmaselvi, K. A.

    2018-04-01

    Green chillies were coated with a composite edible coating composed of gum arabic (5%), glycerol (1%), thyme oil (0.5%) and tween 80 (0.05%) to preserve the freshness and quality of green chillies and thus reduce the cost of preservation. In the present work, the chillies were coated with the composite edible coating using the dipping method with three dipping times (1, 3 and 5 min). The physicochemical parameters of the coated and control chillies stored at room temperature (28±2ºC) were evaluated at regular intervals of storage. There was a significant difference (p≤0.05) in the physicochemical properties between the control chillies and coated chillies with 1, 3 and 5 min dipping times. The coated green chillies showed significantly (p≤0.05) lower weight loss, phenolic acid production, capsaicin production and significantly (p≤0.05) higher retention of ascorbic acid, total chlorophyll content, colour, firmness and better organoleptic properties. The composite edible coating of gum arabic and thyme oil with 3 min dipping was effective in preserving the desirable physico-chemical and organoleptic properties of the green chillies up to 12 days, compared to the uncoated chillies that had a shelf life of 6 days at room temperature.

  6. A p-coumaroyl esterase from Rhizoctonia solani with a pronounced chlorogenic acid esterase activity.

    Science.gov (United States)

    Nieter, Annabel; Kelle, Sebastian; Linke, Diana; Berger, Ralf G

    2017-07-25

    Extracellular esterase activity was detected in submerged cultures of Rhizoctonia solani grown in the presence of sugar beet pectin or Tween 80. Putative type B feruloyl esterase (FAE) coding sequences found in the genome data of the basidiomycete were heterologously expressed in Pichia pastoris. Recombinant enzyme production on the 5-L bioreactor scale (Rs pCAE: 3245UL -1 ) exceeded the productivity of the wild type strain by a factor of 800. Based on substrate specificity profiling, the purified recombinant Rs pCAE was classified as a p-coumaroyl esterase (pCAE) with a pronounced chlorogenic acid esterase side activity. The Rs pCAE was also active on methyl cinnamate, caffeate and ferulate and on feruloylated saccharides. The unprecedented substrate profile of Rs pCAE together with the lack of sequence similarity to known FAEs or pCAEs suggested that the Rs pCAE represents a new type of enzyme. Hydroxycinnamic acids were released from agro-industrial side-streams, such as destarched wheat bran (DSWB), sugar beet pectin (SBP) and coffee pulp (CP). Overnight incubation of coffee pulp with the Rs pCAE resulted in the efficient release of p-coumaric (100%), caffeic (100%) and ferulic acid (85%) indicating possible applications for the valorization of food processing wastes and for the enhanced degradation of lignified biomass. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Micellar Enhanced Ultrafiltration for the Removal of Polycyclic Aromatic Hydrocarbons (PAHs Mixtures in Underground Contaminated Water in Oman

    Directory of Open Access Journals (Sweden)

    Mohamed Aoudia

    2011-12-01

    Full Text Available In an attempt to analyze polycyclic aromatic hydrocarbons (PAHs in diesel contaminated underground water in Oman (Rustaq, Gas chromatography-Mass spectrometry was first used to determine the different concentrations in a standard mixture containing 16 PAHs. Retention time and calibration curves were obtained for all aromatic compounds and were used to identify a given analyte as well as its concentration in the contaminated underground water. Micellar enhanced ultrafiltration (MEUF was then used to treat standard aqueous solution of PAHs at low concentration (~ 1 ppb using an edible nonionic surfactant (Tween 80. The totality of the mixture components was completely rejected. Within the experimental detection limit (± 0.01 ppb, the residual PAH concentrations were less than 0.01 ppb in accord with the allowed concentrations in drinking water. Likewise, excellent rejections of PAHs in MEUF treatment of diesel contaminated underground water at an Omani site (Rustaq were observed. The concentration of PAHs was reduced to less than 0.01 ppb, the accepted limit for the most toxic member of the PAH group (benzo(apyrene.

  8. Genotyping of Giardia duodenalis in vegetables cultivated with organic and chemical fertilizer from street markets and community vegetable gardens in a region of Southern Brazil.

    Science.gov (United States)

    Rafael, Katyelle; Marchioro, Ariella A; Colli, Cristiane M; Tiyo, Bruna T; Evangelista, Fernanda F; Bezagio, Renata C; Falavigna-Guilherme, Ana L

    2017-12-01

    In order to investigate the occurrence of Giardia duodenalis and its genotypes in vegetables that are consumed raw, we analyzed samples cultivated with organic or chemical fertilizer, sold in street markets and from community vegetable gardens in an urban area located in Southern Brazil. We analyzed 130 samples of vegetables such as crisp lettuce, regular lettuce, kale, chicory and rocket, from street markets, and 130 from community gardens. From each sample, 50 g were washed in Tween 80 solution (1%) and the solution obtained was filtered through a cellulose acetate membrane. The retained material was used for DNA extraction with the commercial kit Purelink®. GDH gene was amplified by semi-nested PCR using the GDHeF, GDHiR and GDHiF primers. Positive samples were genotyped using the PCR-RFLP technique with the restriction enzyme NlaIV. We obtained 7.3% (19/260) positive samples for G. duodenalis, both from street markets (10/130) and from community gardens (9/130), including organic and non-organic products. The assemblage AI was predominant, but assemblages B and E were also found. The molecular technique revealed genotypes with zoonotic potential, evidencing the importance of investigating commercialized vegetables that are consumed raw and establishing a more rigid quality control.

  9. Implementation of quality by design principles in the development of microsponges as drug delivery carriers: Identification and optimization of critical factors using multivariate statistical analyses and design of experiments studies.

    Science.gov (United States)

    Simonoska Crcarevska, Maja; Dimitrovska, Aneta; Sibinovska, Nadica; Mladenovska, Kristina; Slavevska Raicki, Renata; Glavas Dodov, Marija

    2015-07-15

    Microsponges drug delivery system (MDDC) was prepared by double emulsion-solvent-diffusion technique using rotor-stator homogenization. Quality by design (QbD) concept was implemented for the development of MDDC with potential to be incorporated into semisolid dosage form (gel). Quality target product profile (QTPP) and critical quality attributes (CQA) were defined and identified, accordingly. Critical material attributes (CMA) and Critical process parameters (CPP) were identified using quality risk management (QRM) tool, failure mode, effects and criticality analysis (FMECA). CMA and CPP were identified based on results obtained from principal component analysis (PCA-X&Y) and partial least squares (PLS) statistical analysis along with literature data, product and process knowledge and understanding. FMECA identified amount of ethylcellulose, chitosan, acetone, dichloromethane, span 80, tween 80 and water ratio in primary/multiple emulsions as CMA and rotation speed and stirrer type used for organic solvent removal as CPP. The relationship between identified CPP and particle size as CQA was described in the design space using design of experiments - one-factor response surface method. Obtained results from statistically designed experiments enabled establishment of mathematical models and equations that were used for detailed characterization of influence of identified CPP upon MDDC particle size and particle size distribution and their subsequent optimization. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Effect of surfactants on separate hydrolysis fermentation and simultaneous saccharification fermentation of pretreated lodgepole pine.

    Science.gov (United States)

    Tu, Maobing; Zhang, Xiao; Paice, Mike; McFarlane, Paul; Saddler, Jack N

    2009-01-01

    The effects of surfactants addition on enzymatic hydrolysis and subsequent fermentation of steam exploded lodgepole pine (SELP) and ethanol pretreated lodgepole pine (EPLP) were investigated in this study. Supplementing Tween 80 during cellulase hydrolysis of SELP resulted in a 32% increase in the cellulose-to-glucose yield. However, little improvement was obtained from hydrolyzing EPLP in the presence of the same amount of surfactant. The positive effect of surfactants on SELP hydrolysis led to an increase in final ethanol yield after the fermentation. It was found that the addition of surfactant led to a substantial increase in the amount of free enzymes in the 48 h hydrolysates derived from both substrates. The effect of surfactant addition on final ethanol yield of simultaneous saccharification and fermentation (SSF) was also investigated by using SELP in the presence of additional furfural and hydroxymethylfurfural (HMF). The results showed that the surfactants slightly increased the conversion rates of furfural and HMF during SSF process by Saccharomyces cerevisiae. The presence of furfural and HMF at the experimental concentrations did not affect the final ethanol concentration either. The strategy of applying surfactants in cellulase recycling to reduce enzyme cost is presented. (c) 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009.

  11. Recycling cellulases during the hydrolysis of steam exploded and ethanol pretreated Lodgepole pine.

    Science.gov (United States)

    Tu, Maobing; Chandra, Richard P; Saddler, Jack N

    2007-01-01

    Recycling of cellulases is one way of reducing the high cost of enzymes during the bioconversion process. The effects of surfactant addition on enzymatic hydrolysis and the potential recycling of cellulases were studied during the hydrolysis of steam exploded Lodgepole pine (SELP) and ethanol pretreated Lodgepole pine (EPLP). Three cellulase preparations (Celluclast, Spezyme CP, and MSUBC) were evaluated to determine their hydrolysis efficiencies over multiple rounds of recycling. The surfactant, Tween 80, significantly increased the yield from 63% to 86% during the hydrolysis of the SELP substrate. The addition of surfactant to the hydrolysis of the EPLP substrate increased the free enzymes in the supernatant from 71% of the initial protein to 96%. Based on the Langmuir adsorption constants, cellulases (Celluclast and Spezyme CP) from Trichoderma reesei showed a higher affinity (3.48 mL/mg and 3.17 mL/mg) for the EPLP substrate than did the Penicillium enzyme (0.62 mg/mg). The Trichoderma reesei enzyme was used in four successive rounds of enzyme recycling using surfactant addition and readsorption onto fresh substrates during the hydrolysis of EPLP. In contrast, the Penicillium-derived enzyme preparation (MSUBC) could only be recycled once. When the same recycling strategy was carried out using the SELP substrate, the hydrolysis yield declined during each enzyme recycling round. These results suggested that the higher lignin content of the SELP substrate, and the low affinity of cellulases for the SELP substrate limited enzyme recycling by readsorption onto fresh substrates.

  12. Formulation of sage essential oil (Salvia officinalis, L.) monoterpenes into chitosan hydrogels and permeation study with GC-MS analysis.

    Science.gov (United States)

    Kodadová, Alexandra; Vitková, Zuzana; Herdová, Petra; Ťažký, Anton; Oremusová, Jarmila; Grančai, Daniel; Mikuš, Peter

    2015-01-01

    This study deals with the formulation of natural drugs into hydrogels. For the first time, compounds from the sage essential oil were formulated into chitosan hydrogels. A sample preparation procedure for hydrophobic volatile analytes present in a hydrophilic water matrix along with an analytical method based on the gas chromatography coupled with the mass spectrometry (GC-MS) was developed and applied for the evaluation of the identity and quantity of essential oil components in the hydrogels and saline samples. The experimental results revealed that the chitosan hydrogels are suitable for the formulation of sage essential oil. The monoterpene release can be effectively controlled by both chitosan and caffeine concentration in the hydrogels. Permeation experiment, based on a hydrogel with the optimized composition [3.5% (w/w) sage essential oil, 2.0% (w/w) caffeine, 2.5% (w/w) chitosan and 0.1% (w/w) Tween-80] in donor compartment, saline solution in acceptor compartment, and semi-permeable cellophane membrane, demonstrated the useful permeation selectivity. Here, (according to lipophilicity) an enhanced permeation of the bicyclic monoterpenes with antiflogistic and antiseptic properties (eucalyptol, camphor and borneol) and, at the same time, suppressed permeation of toxic thujone (not exceeding its permitted applicable concentration) was observed. These properties highlight the pharmaceutical importance of the developed chitosan hydrogel formulating sage essential oil in the dermal applications.

  13. Molecular Identification of a Newly Isolated Bacillus subtilis BI19 and Optimization of Production Conditions for Enhanced Production of Extracellular Amylase

    Directory of Open Access Journals (Sweden)

    Biplab Kumar Dash

    2015-01-01

    Full Text Available A study was carried out with a newly isolated bacterial strain yielding extracellular amylase. The phylogenetic tree constructed on the basis of 16S rDNA gene sequences revealed this strain as clustered with the closest members of Bacillus sp. and identified as Bacillus subtilis BI19. The effect of various fermentation conditions on amylase production through shake-flask culture was investigated. Rice flour (1.25% as a cheap natural carbon source was found to induce amylase production mostly. A combination of peptone and tryptone as organic and ammonium sulfate as inorganic nitrogen sources gave highest yield. Maximum production was obtained after 24 h of incubation at 37°C with an initial medium pH 8.0. Addition of surfactants like Tween 80 (0.25 g/L and sodium lauryl sulfate (0.2 g/L resulted in 28% and 15% increase in enzyme production, respectively. Amylase production was 3.06 times higher when optimized production conditions were used. Optimum reaction temperature and pH for crude amylase activity were 50°C and 6.0, respectively. The crude enzyme showed activity and stability over a fair range of temperature and pH. These results suggest that B. subtilis BI19 could be exploited for production of amylase at relatively low cost and time.

  14. EFFICACY THE MIXTURE OF TWO STRAINS OF Metarhizium anisopliae (Deuteromycotina: Hyphomycetes TO CONTROL Rhipicephalus microplus ON NATURAL INFESTATION OF CATTLE

    Directory of Open Access Journals (Sweden)

    Roger Ivan Rodriguez-Vivas

    2014-08-01

    Full Text Available The objective of the present study was to evaluate the efficacy of Metarhizium anisopliae on the control of Rhipicephalus microplus in cattle infested naturally in the Mexican tropics. The study was carried out on a ranch in the Mexican tropics. Base on the number of adult and immature (larvae and nymphs R. microplus ticks 20 steers were assigned into two groups of 10 cattle. Animals in the treated group (average of 73.4 y 27.5 adult and immature ticks respectively were sprayed with a mixture of Ma14+Ma34 of M. anisopliae at a concentration of 1x108 conidios/ml. The other group remained as untreated control (average of 77.7 y 24.7 adult and immature ticks respectively and treated with water+Tween 80. Each group received 4 applications every 14 days. Adult and immature stages of ticks were recorded on days 0, 3, 5, 7 and 14 post-treatment. From the first application treatment to the end of the experiment, animals in the treated group had lower counts (P < 0.05 of adult (30.9-87% and immature (35.8-72% ticks. The results demonstrate the efficacy of repeated treatment with the strains Ma14+Ma34 of M. anisopliae can be used as an alternative to control natural infestation of R. microplus on cattle in the Mexican tropics.

  15. Synthesize and preliminary biodistribution of 99Tcm(CO)3-PNP5

    International Nuclear Information System (INIS)

    Chu Jinfeng; Kong Dejing; Li Bin; Wang Xuebin

    2007-01-01

    99 Tc m (CO) 3 -PNP5 (PNP5: bis (dimethoxypropylphosphinoethyl) ethoxyethyl- amine) is synthesized through a simple two-step procedure by ligand exchange reaction and its biological characters are studied. Labelling conditions of 99 Tc m (CO) 3 -PNP5 are optimized. Its labelling yield and radio chemical purity are all over 90% determined by TLC. The results of partition coefficient, charge character and stability studies indicate that 99 Tc m (CO) 3 -PNP5 is a lipophilic cation ligand with complex with positiue charge and good stability. Biological properties of 99 Tc m (CO) 3 -PNP5 and 99 Tc m (CO) 3 -PNP5 (T) (adding Tween) are valued contrastively in mice. The results show that 99 Tc m (CO) 3 -PNP5(T) have higher myocardial uptake, lower liver uptake, and higher heart-to-liver ratio. It indicats that the biological properties of 99 Tc m (CO) 3 -PNP5 are improved obviously by adding Tween-80. (authors)

  16. Organically Modified Silica Nanoparticles Interaction with Macrophage Cells: Assessment of Cell Viability on the Basis of Physicochemical Properties.

    Science.gov (United States)

    Kumar, Dhiraj; Mutreja, Isha; Keshvan, Prashant C; Bhat, Madhusudan; Dinda, Amit K; Mitra, Susmita

    2015-11-01

    Silica nanoparticles have drawn a lot of attention for nanomedicine application, and this is attributed to their biocompatibility and ease of surface functionalization. However, successful utilization of these inorganic systems for biomedical application depends on their physicochemical properties. This study, therefore, discusses in vitro toxicity of organically modified silica nanoparticles on the basis of size, shape, and surface properties of silica nanoparticles. Spherical- and oval-shaped nanoparticles having hydroxyl and amine groups were synthesized in Tween 80 micelles using different organosilanes. Nanoparticles of similar size and morphology were considered for comparative assessment. "As-prepared" nanoparticles were characterized in terms of size, shape, and surface properties using ZetaSizer, transmission electron microscopy, and Fourier transform infrared to establish the above parameters. In vitro analysis in terms of nanoparticle-based toxicity was performed on J-774 (macrophage) cell line using propidium iodide-4',6-diamidino-2-phenylindol and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays. Fluorescent dye-entrapped nanoparticles were used to visualize the uptake of the nanoparticles by macrophage cells. Results from cell studies suggested low levels of toxicity for different nanoparticle formulations studied, therefore are suitable for nanocarrier application for poorly soluble molecules. On the contrary, the nanoparticles of similar size and shape, having amine groups and low net negative charge, do not exhibit any in vitro cytotoxicity. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

  17. A role for analytical chemistry in advancing our understanding of the occurrence, fate, and effects of Corexit Oil Dispersants

    Science.gov (United States)

    Place, Ben; Anderson, Brian; Mekebri, Abdou; Furlong, Edward T.; Gray, James L.; Tjeerdema, Ron; Field, Jennifer

    2010-01-01

    On April 24, 2010, the sinking of the Deepwater Horizon oil rig resulted in the release of oil into the Gulf of Mexico. As of July 19, 2010, the federal government's Deepwater Horizon Incident Joint Information Center estimates the cumulative range of oil released is 3,067,000 to 5,258,000 barrels, with a relief well to be completed in early August. By comparison, the Exxon Valdez oil spill released a total of 260,000 barrels of crude oil into the environment. As of June 9, BP has used over 1 million gallons of Corexit oil dispersants to solubilize oil and help prevent the development of a surface oil slick. Oil dispersants are mixtures containing solvents and surfactants that can exhibit toxicity toward aquatic life and may enhance the toxicity of components of weathered crude oil. Detailed knowledge of the composition of both Corexit formulations and other dispersants applied in the Gulf will facilitate comprehensive monitoring programs for determining the occurrence, fate, and biological effects of the dispersant chemicals. The lack of information on the potential impacts of oil dispersants has caught industry, federal, and state officials off guard. Until compositions of Corexit 9500 and 9527 were released by the U.S. Environmental Protection Agency online, the only information available consisted of Material Safety Data Sheets (MSDS), patent documentation, and a National Research Council report on oil dispersants. Several trade and common names are used for the components of the Corexits. For example, Tween 80 and Tween 85 are oligomeric mixtures.

  18. FORMULASI MIKROEMULSI EKSTRAK TERPURIFIKASI DAUN BAYAM MERAH (Amaranthus tricolor L. SEBAGAI SUPLEMEN ANTIOKSIDAN

    Directory of Open Access Journals (Sweden)

    Dwi Lestari Handayani

    2017-03-01

    Full Text Available A research has conducted about the microemulsion formulation of purified extract of red spinach leaves (Amaranthus tricolor L. as an antioxidant supplement with the aim to be able to know the formula to form a microemulsion which meet the physical quality stability and determine antioxidant activity (IC50 of the preparation. Extracts prepared by maceration method using ethanol 96% and then later do the purification using solvent n-hexane and ethyl acetate, after it tested its antioxidant activity. Formula to form a microemulsion purified extract of red spinach leaves clear is to use virgin coconut oil (VCO by 15%, tween 80 for 40%, 35% glycerin and 10% distilled water. Physical stability test was conducted on the organoleptic test, measuring the diameter of globules, pH test, test and test viscosity centrifugation. Test of antioxidant activity in vitro using DPPH method and using Vitamin C as a positive control. Measurement data were statistically analyzed using paired samples T test. The test results of antioxidant activity microemulsion purified extracts of spinach leaves, red show IC50 values on day 1 was 1.83 ppm and the 28th day amounted to 3.71 ppm. While vitamin C microemulsion shows IC50 values on day 1 of 0.24 ppm and the 28th day of 2.51 ppm. Despite the decreased antioxidant activity, but each of the stocks included in the category of very powerful antioxidants.

  19. Microemulsion Formulation of Combination of Virgin Coconut Oil and Rice Bran Oil for Hair Growth

    Directory of Open Access Journals (Sweden)

    Wira Noviana Suhery

    2018-04-01

    Full Text Available Research on micro emulsion formulation of combination of virgin coconut oil (VCO and rice bran oil (RBO as a hair growth promoter has been done. The purpose of this study was to formulate and produce the best formula that is physically stable and optimally promoting the hair growth by varying the content of VCO and RBO in the form of micro emulsions. These dosage formulations were prepared in three formulas using 45% tween 80 as surfactants and 20% glycerin as co surfactant i.e.: F,I containing a combination of VCO and RBO 1:1; FII (1:2 and FIII (2:1. Physical evaluation of the preparation was carried out for 8 weeks of storage which included organoleptic examination, pH, homogeneity, density, globule particle size, phase freeze thaw, and rabbit hair growth activity test for 18 days. Based on the results of the evaluation, it was found that the FI, FII and FIII micro emulsion formulations were physically stable for 8 weeks of storage with a pH ranging from 6.7 to 7.0, density of 1.085-1.088 g/mL, average globul particle size of FI (34.6 nm , FII (54 nm and FIII (68.8 nm. The best formulas is FIII for hair growth length of 1.26 cm for 18 days.

  20. A sustainable and green process for scouring of cotton fabrics using xylano-pectinolytic synergism: switching from noxious chemicals to eco-friendly catalysts.

    Science.gov (United States)

    Singh, Avtar; Kaur, Amanjot; Patra, Arun Kumar; Mahajan, Ritu

    2018-04-01

    The objective of this research was to develop an appropriate, eco-friendly, cost-effective bioscouring methodology for removing natural impurities from cotton fabric. Maximum bioscouring was achieved using 5.0 IU xylanase and 4.0 IU pectinase with material to liquid ratio of 1:15 in a 50 mM buffer (glycine-NaOH buffer, 1.0 mM EDTA and 1% Tween-80, pH 8.5) with a treatment time of 60 min at 50 °C and an agitation speed of 60 rpm. The bioscoured cotton fabrics showed a gain of 1.17% in whiteness, 3.23% in brightness and a reduction of 4.18% in yellowness in comparison to fabric scoured with an alkaline scouring method. Further, after bleaching, the whiteness, brightness and tensile strength of the bioscoured fabrics were increased by 2.18, 2.33 and 11.74% along with a decrease of 4.61% in yellowness of bioscoured plus bleached fabrics in comparison to chemically scoured plus bleached fabrics. From the results, it is clear that bioscouring is more efficient, energy saving and an eco-friendly process and has the potential to replace the environment-damaging scouring process with the xylano-pectinolytic bioscouring process.

  1. A Case of Onychomycosis Caused by Rhodotorula glutinis

    Directory of Open Access Journals (Sweden)

    Hatice Uludag Altun

    2014-01-01

    Full Text Available Rhodotorula spp. have emerged as opportunistic pathogens, particularly in immunocompromised patients. The current study reports a case of onychomycosis caused by Rhodotorula glutinis in a 74-year-old immunocompetent female. The causative agent was identified as R. glutinis based on the pinkish-orange color; mucoid-appearing yeast colonies on Sabouraud Dextrose Agar at 25°C; morphological evaluation in the Corn Meal-Tween 80 agar; observed oval/round budding yeast at 25°C for 72 hours; no observed pseudohyphae; positive urease activity at 25°C for 4 days; and assimilation features detected by API ID 32C kit and automated Vitek Yeast Biochemical Card 2 system. Antifungal susceptibility test results were as follows: amphotericin B (MIC = 0.5 µg/mL, fluconazole (MIC = 128 µg/mL, itraconazole (MIC = 0.125 µg/mL, voriconazole (MIC = 1 µg/mL, posaconazole (MIC = 0.5 µg/mL, anidulafungin (MIC = 0.5 µg/mL, and caspofungin (MIC = 16 µg/mL. Antifungal therapy was initiated with oral itraconazole at a dose of 400 mg/day; seven-day pulse therapy was planned at intervals of three weeks. Clinical recovery was observed in the clinical evaluation of the patient before the start of the third cure. Although R. glutinis has rarely been reported as the causative agent of onychomycosis, it should be considered.

  2. Preparation and Evaluation of Novel In Situ Gels Containing Acyclovir for the Treatment of Oral Herpes Simplex Virus Infections

    Directory of Open Access Journals (Sweden)

    Binu Chaudhary

    2014-01-01

    Full Text Available The objective of this work was to develop an oral mucosal drug delivery system to facilitate the local and systemic delivery of acyclovir for the treatment of oral herpes infection caused by the herpes simplex virus (HSV. An in situ gelling system was used to increase the residence time and thus the bioavailability of acyclovir in oral mucosa. Temperature and pH trigged in situ gel formulations were prepared by cold method using polymers like poloxamer 407, carbopol 934, and HPMC. Glycerin and a mixture of tween 80 and ethanol (1 : 2 ratio were used as the drug dissolving solvent. The pH of carbopol containing formulation was adjusted to pH 5.8 while the pH of poloxamer solution was adjusted to pH 7. These formulations were evaluated for sol-gel transition temperature, gelling capacity, pH, viscosity, spreadability, gel strength, drug content, ex-vitro permeation, and mucoadhesion. The gelation temperatures of all the formulations were within the range of 28–38°C. All the formulations exhibited fairly uniform drug content (98.15–99.75%. Drug release study of all the formulations showed sustained release properties. The release of drug through these in situ gel formulations followed the Higuchi model and Korsmeyer peppas model mechanism.

  3. Foam Properties and Detergent Abilities of the Saponins from Camellia oleifera

    Science.gov (United States)

    Chen, Yu-Fen; Yang, Chao-Hsun; Chang, Ming-Shiang; Ciou, Yong-Ping; Huang, Yu-Chun

    2010-01-01

    The defatted seed meal of Camellia oleifera has been used as a natural detergent and its extract is commercially utilized as a foam-stabilizing and emulsifying agent. The goal of this study was to investigate the foam properties and detergent ability of the saponins from the defatted seed meal of C. oleifera. The crude saponin content in the defatted seed meal of C. oleifera was 8.34 and the total saponins content in the crude saponins extract was 39.5% (w/w). The foaming power of the 0.5 crude saponins extract solution from defatted seed meal of C. oleifera was 37.1 of 0.5 SLS solution and 51.3% to that of 0.5% Tween 80 solution. The R5 value of 86.0% represents good foam stability of the crude saponins extracted from the defatted seed meal of the plant. With the reduction of water surface tension from 72 mN/m to 50.0 mN/m, the 0.5% crude saponins extract solution has wetting ability. The sebum-removal experiment indicated that the crude saponins extract has moderate detergency. The detergent abilities of the saponins from C. oleifera and Sapindus mukorossi were also compared. PMID:21151446

  4. Experimental and clinical studies on simultaneous fat and protein tolerance digestion-absorption test using 131I-triolein and 125I-RISA

    International Nuclear Information System (INIS)

    Tokura, Yasunobu

    1979-01-01

    Simultaneous fat and protein tolerance digestion-absorption test using 131 I-triolein and 125 I-RISA was investigated experimentally in rats and clinically in 148 inpatients with various diseases. The results were as follows: Animal experiments. Fat absorption was markedly impaired in the exclusion of bile from the intestine. Each function of fat and protein absorption was independently detected. These animal experiments gave the clinical evaluation of this test for fat and protein digestion-absorption function. Clinical investigations. The test meal was prepared without using commercial Tween 80 as an emulgent. Either fat or protein absorption was markedly impaired in some patients with various diseases. Inpatients with various diseases investigated were divided into 3 groups by correlation coefficient between fecal excretion ratios of fat and protein. Each function of fat and protein digestion-absorption was able to be detected independently by this test simultaneously. This test can further be used as a labolatory aid in evaluating fat and protein digestion-absorption function in patients with malabsorption syndrome. (author)

  5. Design of Cobalt Nanoparticles with Tailored Structural and Morphological Properties via O/W and W/O Microemulsions and Their Deposition onto Silica

    Directory of Open Access Journals (Sweden)

    Gabriella Di Carlo

    2015-03-01

    Full Text Available Cobalt nanostructures with different size and morphology, i.e., spherical nanoparticles, nanorods, and particles arranged into elongated structures, were prepared using micelles and microemulsions as confined reaction media. The syntheses were carried out using three types of systems: aqueous surfactant solutions, oil-in water (O/W, and water-in-oil (W/O microemulsions. The influence of the surfactant and the precipitating agent used for synthesis was also investigated. For this purpose, cobalt nanostructures were prepared using different non-ionic surfactants, namely Synperonic® 10/6, Pluronic® P123 and a mixture of SPAN 20–TWEEN 80. Three different precipitating agents were used: sodium borohydride, sodium hydroxide, and oxalic acid. Our findings revealed that by changing the type of reaction media as well as the precipitating agent it is possible to modify the shape and size of the cobalt nanostructures. Moreover, the use of O/W microemulsion generates better results in terms of colloidal stability and uniformity of particle size with respect to W/O microemulsion. The different cobalt nanostructures were supported on commercial and mesoporous silica; transmission electron microscopy (TEM images showed that after deposition the Co nanocrystals remain well dispersed on the silica supports. This behavior suggests their great potential in catalytic applications.

  6. In vitro investigations on host specificity of ralstonia solanacearum among solanaceous crops and its biological control in tomato

    International Nuclear Information System (INIS)

    Hasan, S.; Haq, M. I.; Naz, F.; Tahir, M. I.

    2016-01-01

    Ralstonia solanacearum, the causal organism of bacterial wilt of solanaceous crops is a major limitation on the production of solanaceous crops worldwide. The present studies were carried out to explore the prevalence, severity, virulence and host specificity range of R. solanacearum in chili, tomato, eggplant and potato plants while biocontrol of this pathogen was studied on tomato. The isolation and the initial identification of bacterium were done on TTC and 523 media. Out of 32 isolates, 30 showed positive hypersensitive reaction (HR) with variable response and were confirmed as R. solanacearum by performing biochemical tests i.e. Gram staining, KOH, catalase oxidation, Kovacs oxidation, levan production from sucrose, lipase activity on tween 80 agar, production of fluorescent pigment, and oxidation/fermentation of glucose. Race identification studies showed that all the isolates belonged to Race 3 while biovar confirmation tests revealed that 4, 3 and 23 isolates belonged to biovar 1, biovar 2 and biovar 3, respectively. The isolates belonging to distinct biovar class were tested for their wideness of host range by challenging them to chili, tomato, eggplant and potato plants. It was observed that biovar 3 is the most aggressive and has widest host range as compared to counterparts. Biocontrol studies through antagonistic rhizobacteria resulted four antagonistic isolates; PRB10, PAP5, PAT1 and PTR6 having the highest biocontrol activity with 98.75%, 97.5%, 93.75% and 91.25% respectively. (author)

  7. An Artificial Neural Network Based Analysis of Factors Controlling Particle Size in a Virgin Coconut Oil-Based Nanoemulsion System Containing Copper Peptide.

    Science.gov (United States)

    Samson, Shazwani; Basri, Mahiran; Fard Masoumi, Hamid Reza; Abdul Malek, Emilia; Abedi Karjiban, Roghayeh

    2016-01-01

    A predictive model of a virgin coconut oil (VCO) nanoemulsion system for the topical delivery of copper peptide (an anti-aging compound) was developed using an artificial neural network (ANN) to investigate the factors that influence particle size. Four independent variables including the amount of VCO, Tween 80: Pluronic F68 (T80:PF68), xanthan gum and water were the inputs whereas particle size was taken as the response for the trained network. Genetic algorithms (GA) were used to model the data which were divided into training sets, testing sets and validation sets. The model obtained indicated the high quality performance of the neural network and its capability to identify the critical composition factors for the VCO nanoemulsion. The main factor controlling the particle size was found out to be xanthan gum (28.56%) followed by T80:PF68 (26.9%), VCO (22.8%) and water (21.74%). The formulation containing copper peptide was then successfully prepared using optimum conditions and particle sizes of 120.7 nm were obtained. The final formulation exhibited a zeta potential lower than -25 mV and showed good physical stability towards centrifugation test, freeze-thaw cycle test and storage at temperature 25°C and 45°C.

  8. An Artificial Neural Network Based Analysis of Factors Controlling Particle Size in a Virgin Coconut Oil-Based Nanoemulsion System Containing Copper Peptide.

    Directory of Open Access Journals (Sweden)

    Shazwani Samson

    Full Text Available A predictive model of a virgin coconut oil (VCO nanoemulsion system for the topical delivery of copper peptide (an anti-aging compound was developed using an artificial neural network (ANN to investigate the factors that influence particle size. Four independent variables including the amount of VCO, Tween 80: Pluronic F68 (T80:PF68, xanthan gum and water were the inputs whereas particle size was taken as the response for the trained network. Genetic algorithms (GA were used to model the data which were divided into training sets, testing sets and validation sets. The model obtained indicated the high quality performance of the neural network and its capability to identify the critical composition factors for the VCO nanoemulsion. The main factor controlling the particle size was found out to be xanthan gum (28.56% followed by T80:PF68 (26.9%, VCO (22.8% and water (21.74%. The formulation containing copper peptide was then successfully prepared using optimum conditions and particle sizes of 120.7 nm were obtained. The final formulation exhibited a zeta potential lower than -25 mV and showed good physical stability towards centrifugation test, freeze-thaw cycle test and storage at temperature 25°C and 45°C.

  9. The genotoxic effect of oxcarbazepine on mice blood lymphocytes.

    Science.gov (United States)

    Akbar, Huma; Khan, Ajmal; Mohammadzai, Imdadullah; Khisroon, Muhammad; Begum, Ilham

    2018-04-01

    This study was conducted to assess the amount of DNA damage caused by Oxcarbazepine (OXC) through single cell gel electrophoresis (SCGE) technique/comet assay. OXC derived from dibenzazepine series is an effective second generation antiepileptic drug (AED) for both children and adults. Side effects like genotoxic effects of AEDs are of prime importance resulting from toxic metabolites, free radicals and reactive oxygen species (ROS). Forty Eight adult male Bagg's albino mice (BALB/c) were randomly classified into eight groups, each comprising of six animals. Two of these groups were control and six were tested groups. Control groups were injected with 1% tween 80 while tested groups were injected with 10, 20, and 40 mg/kg-day OXC for seven days (acute therapy) and 28 days (subchronic therapy) in peritoneal cavity. Blood samples were collected by cardiac puncture and subjected to comet assay for the analysis of DNA damage. Per sample 100 cells were scored and classified according to comet tail length. The results showed that OXC in acute and long term therapies had significantly higher (p < 0.05) genotoxicity in treated groups as compared to control groups. Our study suggests that OXC may cause significant DNA damage in both acute as well as in subchronic therapies.

  10. A potential tocopherol acetate loaded palm oil esters-in-water nanoemulsions for nanocosmeceuticals

    Directory of Open Access Journals (Sweden)

    Rahman Raja

    2010-02-01

    Full Text Available Abstract Background Cosmeceuticals are cosmetic-pharmaceutical hybrids intended to enhance health and beauty of the skin. Nanocosmeceuticals use nano-sized system for the delivery of active ingredients to the targeted cells for better penetration. In this work, nanoemulsion from palm oil esters was developed as a delivery system to produce nanocosmeceuticals. The stability of the resulting formulation was tested using various methods. In addition, the effect of components i.e. Vitamin E and Pluronic F-68 on the formulation was also studied. Results Both vitamin E and Pluronic F-68 were found to co-emulsify and co-stabilized the formulations. The best formulation was found to be the one having the composition of 10% Palm Oil Esters (POEs, 10% vitamin E, 24% Tween 80, 2.4% Pluronic F-68 and 53.6% deionised water. Those compositions are considered to be the best as a nanocosmeceutical product due to the small particle size (94.21 nm, low occurrence of Ostwald ripening and stable at different storing temperatures (5, 25 and 45°C for four weeks. Conclusions Palm oil esters-in-water nanoemulsions loaded with vitamin E was successfully formulated and has the potential for the use as nanocosmeceuticals.

  11. DNA-repair after irradiation of cells with gamma-rays and neutrons

    International Nuclear Information System (INIS)

    Altmann, H.

    1975-11-01

    The structural alterations of calf thymus DNA produced by neutron or gamma irradiation were observed by absorption spectra, sedimentation rate and viscosity measurements. Mixed neutron-gamma irradiation produced fewer single and double strand breaks compared with pure gamma irradiation. RBE-values for mixed neutron-gamma radiation were less than 1, and DNA damage decreased with increasing neutron dose rate. Repair processes of DNA occuring after irradiation were measured in mouse spleen suspensions and human lymphocytes using autoradiographic methods and gradient centrifugations. The number of labelled cells was smaller after mixed neutron-gamma irradiation than after gamma irradiation. The rejoining of strand breaks in alkaline and neutral sucrose was more efficient after gamma irradiation than after mixed neutron-gamma irradiation. Finally, the effect of detergents Tween 80 and Nonident P40 on unscheduled DNA synthesis was studied by autoradiography after mixed neutron-gamma irradiation (Dn=5 krad). The results showed that the DNA synthesis was inhibited by detergent solutions of 0.002%

  12. A versatile bio-based material for efficiently removing toxic dyes, heavy metal ions and emulsified oil droplets from water simultaneously.

    Science.gov (United States)

    Li, Daikun; Li, Qing; Mao, Daoyong; Bai, Ningning; Dong, Hongzhou

    2017-12-01

    Developing versatile materials for effective water purification is significant for environment and water source protection. Herein, a versatile bio-based material (CH-PAA-T) was reported by simple thermal cross-linking chitosan and polyacrylic acid which exhibits excellent performances for removing insoluble oil, soluble toxic dyes and heavy metal ions from water, simultaneously. The adsorption capacities are 990.1mgg -1 for methylene blue (MB) and 135.9mgg -1 for Cu 2+ , which are higher than most of present advanced absorbents. The adsorption towards organic dyes possesses high selectivity which makes CH-PAA-T be able to efficiently separate dye mixtures. The stable superoleophobicity under water endows CH-PAA-T good performance to separate toluene-in-water emulsion stabilized by Tween 80. Moreover, CH-PAA-T can be recycled for 10 times with negligible reduction of efficiency. Such versatile bio-based material is a potential candidate for water purification. Copyright © 2017. Published by Elsevier Ltd.

  13. Biosynthesis of tert-butyl (3R,5S)-6-chloro-3,5-dihydroxyhexanoate by carbonyl reductase from Rhodosporidium toruloides in mono and biphasic media.

    Science.gov (United States)

    Liu, Zhi-Qiang; Wu, Lin; Zheng, Ling; Wang, Wen-Zhong; Zhang, Xiao-Jian; Jin, Li-Qun; Zheng, Yu-Guo

    2018-02-01

    tert-Butyl (3R,5S)-6-chloro-3,5-dihydroxyhexanoate ((3R,5S)-CDHH) is the key intermediate for synthesis of atorvastatin and rosuvastatin. Carbonyl reductase exhibits excellent activity toward tert-butyl (S)-6-chloro-5-hydroxy-3-oxohexanoate ((S)-CHOH) to synthesize (3R,5S)-CDHH. In this study, a whole cell biosynthesis reaction system to produce (3R,5S)-CDHH was constructed in organic solvents. A solution of 10% (v/v) Tween-80 was introduced to the reaction system as a co-solvent, which greatly enhanced biotransformation process, giving 98.9% yield, >99% ee and 1.8-fold higher space time yield in 5 h bioconversion of 1 M (S)-CHOH, compared with 98.7% yield and >99% ee in 9 h bioconversion of a purely aqueous reaction system. Moreover, a water-octanol biphasic reaction system was built and 20% of octanol was added as reservoir of substrate resulting in 98% yield, >99% ee and 4.08 mmol L -1  h -1  g -1 (wet cell weight) space time yield. This study paved a way for the whole cell biosynthesis of (3R,5S)-CDHH in mono and biphasic media. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Fungal biotrap for retrieval of heavy metals from industrial wastewaters

    International Nuclear Information System (INIS)

    Crusberg, T.C.; Weathers, P.; Baker, E.

    1989-01-01

    Biotraps are living cells or specific cell components capable of removing or stabilizing toxic substances form waste streams. The fungus Penicillium ochro-chloron was discovered growing in an electroplating wastewater stream in Japan. It is not only tolerant to very high concentrations of divalent metal ions, but it can effectively remove heavy metals (such as uranium cadmium, nickel, etc.) from almost any aqueous waste stream. This paper discussed P. ochro-chloron biotrap which was prepared by growing spores in a glucose-minimal salts medium supplemented with 0.5 percent Tween 80 for 5 days with constant gentle agitation. The while mycelia beads 4-6 mm dia. were treated in a Buchner funnel with 80% ethanol to kill the cells, 15 percent sodium carbonate/bicarbonate pH 9.5, and then resuspended in an aqueous slurry at pH 4.0. The mycelia beads were used as an adsorbent in a batch experiment to determine copper-to-mycelia binding. This system should be capable of heavy metal uptake and recovery from both electroplating wastewaters and contaminated aqueous environments. The use of this fungus biotrap will rival synthetic cation environments. The use of this fungus biotrap will rival synthetic cation exchange resins because of lower cost, lower weight per unit of exchange capacity and ease of application

  15. Isolasi dan Karakterisasi Bakteriosin yang Dihasilkan Oleh Lactobacillus lactis dari Sedimen Laut

    Directory of Open Access Journals (Sweden)

    Rofiq Sunaryanto

    2015-04-01

    Full Text Available Telah dilakukan isolasi dan karakterisasi bakteriosin yang dihasilkan oleh Lactobacillus lactis yang berasal dari sedimen laut. Karakterisasi bakteriosin meliputi uji aktivitas antimikroba, stabilitas terhadap suhu, pH, penambahan enzim, surfaktan, dan stabilitas bakteriosin terhadap penyinaran lampu UV. Aktivitas antimikroba bakteriosin diuji melawan bakteri uji Escherichia coli ATCC 25922, Enterococcus faecalis ATCC 29212, Bacillus subtilis ATCC 66923, Staphyllococcus aureus ATCC 25923, Lactobacillus plantarum, Lactobacillus bulgaricus, Lactobacillus casei, dan Candida albican. Hasil penelitian menunjukkan bahwa bakteriosin mampu menghambat pertumbuhan E.coli ATCC 25922, E. faecalis ATCC 29212, S. aureus ATCC 25923 dan B. subtilis ATCC 66923, namun demikian tidak mampu menghambat pertumbuhan L. plantarum, L. bulgaricus, L. casei, dan C. albican. Bakteriosin yang dihasilkan oleh Lactobacillus lactis stabil terhadap pemanasan sampai dengan suhu 70 °C dan stabil pada rentang pH 3 sampai dengan 7. Aktivitas bakteriosin hilang dengan penambahan tripsin, pepsin, dan proteinase-K, namun aktivitas bakteriosin stabil terhadap penambahan a-amilase. Penambahan tween 20, tween 80, dan EDTA mampu meningkatkan aktivitas bakteriosin sebesar 1,1 sampai dengan 1,2 kali dibandingkan dengan tanpa penambahan surfaktan. Penyinaran lampu UV selama 15 menit tidak berpengaruh terhadap aktivitas bakteriosin.

  16. Identification, recombinant production and partial biochemical characterization of an extracellular cold-active serine-metalloprotease from an Antarctic Pseudomonas isolate

    Directory of Open Access Journals (Sweden)

    Natalia Fullana

    2017-08-01

    Full Text Available Cold-adapted enzymes are generally derived from psychrophilic microorganisms and have features that make them very attractive for industrial and biotechnological purposes. In this work, we identified a 50 kDa extracellular protease (MP10 from the Antarctic isolate Pseudomonas sp. AU10. The enzyme was produced by recombinant DNA technology, purified using immobilized metal affinity chromatography and partially characterized. MP10 is an alkaline thermosensitive serine-metallo protease with optimal activity at pH 8.0 and 40 ℃, in the presence of 1.5 mM Ca2+. MP10 showed 100% residual activity and stability (up to 60 min when incubated with 7% of non-ionic surfactants (Triton X-100, Tween-80 and Tween-20 and 1.5% of the oxidizing agent hydrogen peroxide. The 3D MP10 structure was predicted and compared with the crystal structure of mesophilic homologous protease produced by Pseudomonas aeruginosa PA01 (reference strain and other proteases, showing similarity in surface area and volume of proteins, but a significantly higher surface pocket area and volume of MP10. The observed differences presumably may explain the enhanced activity of MP10 for substrate binding at low temperatures. These results give insight to the potential use of MP10 in developing new biotechnologically processes active at low to moderate temperatures, probably with focus in the detergent industry.

  17. Characterization of Lipase from Bacillus subtilisI-4 and Its Potential Use in Oil Contaminated Wastewater

    Directory of Open Access Journals (Sweden)

    Syeda Abeer Iqbal

    2015-10-01

    Full Text Available ABSTRACTA lipase producing bacterium was isolated from oil contaminated effluents of various industries from Sheikhupura Road, Pakistan, and, on the basis of biochemical and 16S rRNA ribotyping, was identified asBacillus subtilis. The optimum temperature and pH for the growth of the culture were 37ºC and 7.0, respectively.B. subtilis I-4 had a lag phase of 4 h in LB medium while this phase prolonged to 6 h in oil containing medium. The optimum temperature and pH for the enzyme activity were 50ºC and 7.0, respectively. Maximum lipase activity was found in the presence of Ca ions. Olive oil and Tween 80 induced lipase gene in the bacterium while concentration of oil greater than 2% retarded the growth of the organism. In addition to lipaseB. subtilis I-4 also produced alkane hydroxylase and biosurfactant which could make this bacterium potential candidate for lipase production as well as bioremediation of oil-contaminated wastewater.

  18. Effects of oil dispersants on settling of marine sediment particles and particle-facilitated distribution and transport of oil components.

    Science.gov (United States)

    Cai, Zhengqing; Fu, Jie; Liu, Wen; Fu, Kunming; O'Reilly, S E; Zhao, Dongye

    2017-01-15

    This work investigated effects of three model oil dispersants (Corexit EC9527A, Corexit EC9500A and SPC1000) on settling of fine sediment particles and particle-facilitated distribution and transport of oil components in sediment-seawater systems. All three dispersants enhanced settling of sediment particles. The nonionic surfactants (Tween 80 and Tween 85) play key roles in promoting particle aggregation. Yet, the effects varied with environmental factors (pH, salinity, DOM, and temperature). Strongest dispersant effect was observed at neutral or alkaline pH and in salinity range of 0-3.5wt%. The presence of water accommodated oil and dispersed oil accelerated settling of the particles. Total petroleum hydrocarbons in the sediment phase were increased from 6.9% to 90.1% in the presence of Corexit EC9527A, and from 11.4% to 86.7% for PAHs. The information is useful for understanding roles of oil dispersants in formation of oil-sediment aggregates and in sediment-facilitated transport of oil and PAHs in marine eco-systems. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. A New Emulsion Liquid Membrane Based on a Palm Oil for the Extraction of Heavy Metals

    Directory of Open Access Journals (Sweden)

    Sanna Björkegren

    2015-04-01

    Full Text Available The extraction efficiency of hexavalent chromium, Cr(VI, from water has been investigated using a vegetable oil based emulsion liquid membrane (ELM technique. The main purpose of this study was to create a novel ELM formulation by choosing a more environmentally friendly and non-toxic diluent such as palm oil. The membrane phase so formulated includes the mobile carrier tri-n-octylmethylammonium chloride (TOMAC, to facilitate the metal transport, and the hydrophilic surfactant Tween 80 to facilitate the dispersion of the ELM phase in the aqueous solution. Span 80 is used as surfactant and butanol as co-surfactant. Our results demonstrate that this novel ELM formulation, using the vegetable palm oil as diluent, is useful for the removal of hexavalent chromium with an efficiency of over 99% and is thus competitive with the already existing, yet less environmentally friendly, ELM formulations. This result was achieved with an optimal concentration of 0.1 M NaOH as stripping agent and an external phase pH of 0.5. Different water qualities have also been investigated showing that the type of water (deionized, distilled, or tap water does not significantly influence the extraction rate.

  20. Solubility investigation of ether and ester essential oils in water using spectrometry and GC/MS

    Directory of Open Access Journals (Sweden)

    B. Khodabandeloo

    2017-11-01

    Full Text Available Background and objectives: Essential oils (volatiles are aromatic oily liquids prepared from different parts of plants and demonstrate various therapeutic and cosmetic properties. The dissolution of essential oils are not desirable in water, therefore the aim of this research was evaluation and selection the best co-solvents for increasing their solubility and bio availability. Methods:The solubility of six  plants essential oils were investigated in presence of propylene glycol (PG, polyethylene glycol 300 (PEG, glycerin and ethanol as solvent and tween 80 or lecithin as co-solvent by observation and spectrophotometric assay. Chemical composition of the essential oils and supersaturated 50% ethanol (SSE and 50% PG or PEG (SSP solutions were analyzed by GC/MS, too. Results: Ester (Lavandula dentata, Heracleum persicum and, Elettaria cardamomum essential oils showed the best solubility in ethanol and PG, respectively. Ether (Foeniculum vulgare, Pimpinella anisum and Petroselinum crispum essential oils had the best solubility in ethanol and PEG, respectively. In ester class, mixture of ethanol/water was the best solvent according to solubility and total amounts of major compounds of the essential oils. In ether class, all samples had better solubility in mixtures of ethanol/water than PEG, but the amounts of total phenols or ethers in SSP of some samples were higher than SSE. Therefore selecting the best solvent for these class need more experiments. Conclusion: Selecting the solvent for essential oils changes their chemical composition; therefore the best solvent was different for various purposes.

  1. Survey of Bacterial and Fungal Contaminations in Iranian Alginate, Foreign Alginate and Speedex Used for Impression in Dentistry

    Directory of Open Access Journals (Sweden)

    Abbas Falah Tafti

    2012-02-01

    Full Text Available Background and Aims: Since impression materials usually contact with saliva, blood, and oral soft tissues, their microbial contamination are harmful in immunocompromised patients. The aim of the present study was to determine the bacterial and fungal contamination in common impression materials. Materials and Methods: In current lab trial study, 5 different samples from each 4 impression materials were homogenized in 1 ml Tween 80 and then 100µl of each sample were cultured onto blood agar, EMB, or sabouraud dextrose agar. Bacterial and fungal cultures were incubated at 37º C and 30º C, respectively. The isolated bacterial and fungal colonies were enumerated and identified using specific diagnostic media and tests. Data were analyzed using Kruskal-Wallis test. Results: Totally 75% of samples had one or several bacterial contaminations. Iranian alginate and Speedex (putty were the most contaminated samples. On the other hand, Speedex (light body and foreign alginate showed lower contamination. Species of Micrococcus, Staphylococcus, Bacilluses, Corynebacteria, gram negative Citrobacter, Actinomycetes and Neisseria were isolated from the analyzed impression materials. Aspergillus, Penicillium, Alternaria, Cladosporium and Sepdonium were the fungi isolated from impression materials. Statistical significant difference was shown between bacterial contamination of Iranian and foreign alginates (P=0.001. There was no statistical significant differences between the bacterial and fungal isolated colonies (CFU/gr of 4 tested impression materials (P=0.21. Conclusion: Several opportunistic bacteria and fungi were isolated from impression materials especially from Iranian alginate and Speedex putty which indicated their contamination.

  2. Removal of mercury by foam fractionation using surfactin, a biosurfactant.

    Science.gov (United States)

    Chen, Hau-Ren; Chen, Chien-Cheng; Reddy, A Satyanarayana; Chen, Chien-Yen; Li, Wun Rong; Tseng, Min-Jen; Liu, Hung-Tsan; Pan, Wei; Maity, Jyoti Prakash; Atla, Shashi B

    2011-01-01

    The separation of mercury ions from artificially contaminated water by the foam fractionation process using a biosurfactant (surfactin) and chemical surfactants (SDS and Tween-80) was investigated in this study. Parameters such as surfactant and mercury concentration, pH, foam volume, and digestion time were varied and their effects on the efficiency of mercury removal were investigated. The recovery efficiency of mercury ions was highly sensitive to the concentration of the surfactant. The highest mercury ion recovery by surfactin was obtained using a surfactin concentration of 10 × CMC, while recovery using SDS required 10 × CMC. However, the enrichment of mercury ions in the foam was superior with surfactin, the mercury enrichment value corresponding to the highest metal recovery (10.4%) by surfactin being 1.53. Dilute solutions (2-mg L(-1) Hg(2+)) resulted in better separation (36.4%), while concentrated solutions (100 mg L(-1)) enabled only a 2.3% recovery using surfactin. An increase in the digestion time of the metal solution with surfactin yielded better separation as compared with a freshly-prepared solution, and an increase in the airflow rate increased bubble production, resulting in higher metal recovery but low enrichment. Basic solutions yielded higher mercury separation as compared with acidic solutions due to the precipitation of surfactin under acidic conditions.

  3. Mild chemical pretreatments are sufficient for complete saccharification of steam-exploded residues and high ethanol production in desirable wheat accessions.

    Science.gov (United States)

    Zahoor; Tu, Yuanyuan; Wang, Lingqiang; Xia, Tao; Sun, Dan; Zhou, Shiguang; Wang, Yanting; Li, Ying; Zhang, Heping; Zhang, Tong; Madadi, Meysam; Peng, Liangcai

    2017-11-01

    In this study, a combined pretreatment was performed in four wheat accessions using steam explosion followed with different concentrations of H 2 SO 4 or NaOH, leading to increased hexoses yields by 3-6 folds from enzymatic hydrolysis. Further co-supplied with 1% Tween-80, Talq90 and Talq16 accessions exhibited an almost complete enzymatic saccharification of steam-exploded (SE) residues after 0.5% H 2 SO 4 or 1% NaOH pretreatment, with the highest bioethanol yields at 18.5%-19.4%, compared with previous reports about wheat bioethanol yields at 11%-17% obtained under relatively strong pretreatment conditions. Furthermore, chemical analysis indicated that much enhanced saccharification in Talq90 and Talq16 may be partially due to their relatively low cellulose CrI and DP values and high hemicellulose Ara and H-monomer levels in raw materials and SE residues. Hence, this study has not only demonstrated a mild pretreatment technology for a complete saccharification, but it has also obtained the high ethanol production in desirable wheat accessions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Heat dissipation for the Intel Core i5 processor using multiwalled carbon-nanotube-based ethylene glycol

    International Nuclear Information System (INIS)

    Thang, Bui Hung; Trinh, Pham Van; Quang, Le Dinh; Khoi, Phan Hong; Minh, Phan Ngoc; Huong, Nguyen Thi

    2014-01-01

    Carbon nanotubes (CNTs) are some of the most valuable materials with high thermal conductivity. The thermal conductivity of individual multiwalled carbon nanotubes (MWCNTs) grown by using chemical vapor deposition is 600 ± 100 Wm -1 K -1 compared with the thermal conductivity 419 Wm -1 K -1 of Ag. Carbon-nanotube-based liquids - a new class of nanomaterials, have shown many interesting properties and distinctive features offering potential in heat dissipation applications for electronic devices, such as computer microprocessor, high power LED, etc. In this work, a multiwalled carbon-nanotube-based liquid was made of well-dispersed hydroxyl-functional multiwalled carbon nanotubes (MWCNT-OH) in ethylene glycol (EG)/distilled water (DW) solutions by using Tween-80 surfactant and an ultrasonication method. The concentration of MWCNT-OH in EG/DW solutions ranged from 0.1 to 1.2 gram/liter. The dispersion of the MWCNT-OH-based EG/DW solutions was evaluated by using a Zeta-Sizer analyzer. The MWCNT-OH-based EG/DW solutions were used as coolants in the liquid cooling system for the Intel Core i5 processor. The thermal dissipation efficiency and the thermal response of the system were evaluated by directly measuring the temperature of the micro-processor using the Core Temp software and the temperature sensors built inside the micro-processor. The results confirmed the advantages of CNTs in thermal dissipation systems for computer processors and other high-power electronic devices.

  5. Physicochemical Characterization and Thermodynamic Studies of Nanoemulsion-Based Transdermal Delivery System for Fullerene

    Directory of Open Access Journals (Sweden)

    Cheng Loong Ngan

    2014-01-01

    Full Text Available Fullerene nanoemulsions were formulated in palm kernel oil esters stabilized by low amount of mixed nonionic surfactants. Pseudoternary phase diagrams were established in the colloidal system of PKOEs/Tween 80 : Span 80/water incorporated with fullerene as antioxidant. Preformulation was subjected to combination of high and low energy emulsification methods and the physicochemical characteristics of fullerene nanoemulsions were analyzed using electroacoustic spectrometer. Oil-in-water (O/W nanoemulsions with particle sizes in the range of 70–160 nm were formed. The rheological characteristics of colloidal systems exhibited shear thinning behavior which fitted well into the power law model. The effect of xanthan gum (0.2–1.0%, w/w and beeswax (1–3%, w/w in the estimation of thermodynamics was further studied. From the energetic parameters calculated for the viscous flow, a moderate energy barrier for transport process was observed. Thermodynamic study showed that the enthalpy was positive in all xanthan gum and beeswax concentrations indicating that the formation of nanoemulsions could be endothermic in nature. Fullerene nanoemulsions with 0.6% or higher xanthan gum content were found to be stable against creaming and flocculation when exposed to extreme environmental conditions.

  6. Enhanced biodegradation of asphalt in the presence of Tween surfactants, Mn(2+) and H2O2 by Pestalotiopsis sp. in liquid medium and soil.

    Science.gov (United States)

    Yanto, Dede Heri Yuli; Tachibana, Sanro

    2014-05-01

    Asphalt and fractions thereof can contaminate water and soil environments. Forming as residues in distillation products in crude oil refineries, asphalts consist mostly of asphaltene instead of aliphatics, aromatics, and resins. The high asphaltene content might be responsible for the decrease in bioavailability to microorganisms and therefore reduce the biodegradability of asphalt in the environment. In this study, the effect on asphalt biodegradation by Pestalotiopsis sp. in liquid medium and soil of nonionic Tween surfactants in the presence of Mn2+ and H2O2 was examined. The degradation was enhanced by Tween 40 or Tween 80 (0.1%) in the presence of Mn2+ (1 mM) and H2O2 (0.05 mM). A Tween surfactant, Mn2+, and H2O2 can overcome bioavailability-mediated constraints and increase ligninolytic activities, particularly manganese peroxidase and laccase activities. The study is significant for the bioremediation of asphalt and/or viscous-crude oil-contaminated environments. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. Investigation of optical properties and the photocatalytic activity of synthesized YbYO4 nanoparticles and YbVO4/NiWO4 nanocomposites by polymeric capping agents

    Science.gov (United States)

    Pourmasoud, Saeid; Sobhani-Nasab, Ali; Behpour, Mohsen; Rahimi-Nasrabadi, Mehdi; Ahmadi, Farhad

    2018-04-01

    YbVO4 nanoparticles YbVO4/NiWO4 nanocomposites were synthesized by simple and new method. The effect of various polymeric capping agents such as Tween 80, Tween 20 and PEG on the shape and size of YbVO4/NiWO4 nanocomposites were investigated. YbVO4/NiWO4 nanocomposites were analyzed through some techniques including, X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, vibrating sample magnetometer (VSM), thermogravimetry differential thermal analysis (TG-DTA), transmission electron microscopy (TEM), field emission electron microscopy (FESEM), ultraviolet-visible spectroscopy (UV-Vis), and energy-dispersive X-ray spectroscopy (EDX). This attempt is the first study on the photocatalytic performance of the YbVO4/NiWO4 nanocomposites in various conditions such as size of particles and kind of dyes (rhodamine B (Rh B), methylene blue (MB), methyl orange (MO), and phenol red (Ph R)), under visible light.

  8. Performance of chromogenic media for Candida in rapid presumptive identification of Candida species from clinical materials.

    Science.gov (United States)

    Pravin Charles, M V; Kali, Arunava; Joseph, Noyal Mariya

    2015-06-01

    In perspective of the worldwide increase in a number of immunocompromised patients, the need for identification of Candida species has become a major concern. The development of chromogenic differential media, introduced recently, facilitate rapid speciation. However, it can be employed for routine mycology workup only after an exhaustive evaluation of its benefit and cost effectiveness. This study was undertaken to evaluate the benefit and cost effectiveness of chromogenic media for speciation of Candida clinical isolates. Sputum samples of 382 patients were screened for the presence of Candida spp. by Gram stain and culture on sabouraud dextrose agar. Candida species were identified using Gram stain morphology, germ tube formation, cornmeal agar with Tween-80, sugar fermentation tests and morphology on HiCrome Candida differential agar. All the Candida isolates were inoculated on HiCrome Candida agar (HiMedia, Mumbai, India). The sensitivity and specificity of HiCrome agar for identification of Candida albicans were 90% and 96.42%, respectively whereas sensitivity and specificity of carbohydrate fermentation test were 86.67% and 74.07%, respectively. Sensitivity and specificity values of HiCrome agar for detection of C. albicans, Candida parapsilosis and Candida glabrata were above 90%. We found HiCrome agar has high sensitivity and specificity comparable to that of the conventional method. In addition, use of this differential media could significantly cut down the turnaround time as well as cost of sample processing.

  9. Evaluation of SOC for the presumptive identification of Candida albicans and Cryptococcus neoformans.

    Science.gov (United States)

    Fleming, W H; Knezek, K L; Dorn, G L

    1987-01-01

    SOC, a fungal growth medium composed of Solryth, oxgall, and caffeic acid, was evaluated as a medium to provide rapid, differential identification of Candida albicans and Cryptococcus neoformans. Using a variety of common isolation media to produce the yeast inocula, the germ tube methods tested ranked in the following order of decreasing sensitivity: SOC (97% +/- 1), serum (92% +/- 5), rabbit coagulase plasma with EDTA in combination with tryptic soy broth (89% +/- 5), TOC (89% +/- 6), and rabbit coagulase plasma with EDTA (83% +/- 4). In chlamydospore production, SOC also proved to be the most sensitive after 24 h incubation: SOC (96% +/- 2), TOC (80% +/- 2), and cornmeal-Tween 80 agar (14% +/- 3). Other medically important yeasts showed normal patterns of growth within 24 h on SOC, thus assisting in their identification. Eighty strains of Cryptococcus neoformans showed characteristic brown pigmentation on SOC and TOC within 18 h, while all other species of the genus Cryptococcus and 229 Candida isolates did not show a change in pigmentation.

  10. Potential for entomopathogenic fungi to control Triatoma dimidiata (Hemiptera: Reduviidae, a vector of Chagas disease in Mexico

    Directory of Open Access Journals (Sweden)

    María Guadalupe Vázquez-Martínez

    2014-12-01

    Full Text Available Introduction The use of entomopathogenic fungi to control disease vectors has become relevant because traditional chemical control methods have caused damage to the environment and led to the development of resistance among vectors. Thus, this study assessed the pathogenicity of entomopathogenic fungi in Triatoma dimidiata. Methods Preparations of 108 conidia/ml of Gliocladium virens, Talaromyces flavus, Beauveria bassiana and Metarhizium anisopliae were applied topically on T. dimidiata nymphs and adults. Controls were treated with the 0.0001% Tween-80 vehicle. Mortality was evaluated and recorded daily for 30 days. The concentration required to kill 50% of T. dimidiata (LC50 was then calculated for the most pathogenic isolate. Results Pathogenicity in adults was similar among B. bassiana, G. virens and T. flavus (p>0.05 and differed from that in triatomine nymphs (p=0.009. The most entomopathogenic strains in adult triatomines were B. bassiana and G. virens, which both caused 100% mortality. In nymphs, the most entomopathogenic strain was B. bassiana, followed by G. virens. The native strain with the highest pathogenicity was G. virens, for which the LC50 for T. dimidiata nymphs was 1.98 x108 conidia/ml at 13 days after inoculation. Conclusions Beauveria bassiana and G. virens showed entomopathogenic potential in T. dimidiata nymphs and adults. However, the native G. virens strain presents a higher probability of success in the field, and G. virens should thus be considered a potential candidate for the biological control of triatomine Chagas disease vectors.

  11. The preliminary assessment and isolation of entomopathogenic fungi to be used in biological control with twospotted spider mite [Tetranychus urticae (acari, tetranychidae)] from East Anatolia

    Science.gov (United States)

    Örtücü, Serkan; Algur, Ömer Faruk

    2017-04-01

    This study was conducted to isolation entomopathogenic fungi for possible use in biocontrol of two-spotted spider mite Tetranychus urticae Koch. and to determine their pathogenicity. For this purpose, plant leaves infected with T. urticae were collected from Erzurum, Kars and Ardahan. At laboratory, the internal and external mycoflora of T.urticae individuals on plant leaves were determined. As a result of isolation, twenty-five different fungi species belonging to the genera Acremonium, Alternaria, Aspergillus, Beauveria, Cladosporium, Gliocladium, Humicola, Penicillium, Trichoderma, Isaria, Ulocladium and Verticillium were obtained. Pathogenicity of this forty-five isolate belonging to twenty-five species were evaluated. As a test organism, T. urticae was used and suspensions (1 × 108conidia ml-1) were prepared in Tween 80. 2ml suspension of a single dose was sprayed onto down side of bean leaf discs using hand sprayer. Mortality was recorded daily for 7 days. A total of twelve isolates belonging to three species were determined to be pathogen against T.urticae. According to scale used: AT020 Isaria farinosa and AT025 Cladosporium cladosporioides were determined as least pathogen, AT037 and AT101 Beauveria bassiana, and AT019 and AT026 C. cladosporioides, and AT035 and AT036 I. farinosa as moderate pathogen, AT007, AT021, AT034 and AT076 B. bassiana as highly pathogen. The other thirty-three isolates found that not pathogenic against T.urticae.

  12. Short communication: Intestinal digestibility of amino acids in fluid- and particle-associated rumen bacteria determined using a precision-fed cecectomized rooster bioassay.

    Science.gov (United States)

    Fonseca, A C; Fredin, S M; Ferraretto, L F; Parsons, C M; Utterback, P L; Shaver, R D

    2014-01-01

    Microbial protein represents the majority of metabolizable protein absorbed by ruminant animals. Enhanced understanding of the AA digestibility of rumen microbes will improve estimates of metabolizable protein. The objective of this experiment was to determine the digestibility of AA in fluid- (FAB) and particle-associated bacteria (PAB) using the precision-fed cecectomized rooster bioassay. Bacteria were isolated from 4 ruminally cannulated lactating Holstein cows by differential centrifugation, including particle suspension in 0.1% Tween-80 for increased removal of PAB from ruminal digesta. Samples of FAB and PAB were fed to 9 cecectomized roosters to determine standardized digestibility of AA. Total AA digestibility was 76.8 and 75.5% for FAB and PAB, respectively, but did not differ. Differences existed in AA digestibilities within bacterial type when compared with the mean essential AA digestibility value. Compared with previous literature estimates of AA digestibility in microbes (mean = 76%; range = 57-87%) and relative to National Research Council estimates of total AA from rumen bacteria (80%), the precision-fed cecectomized rooster assay is an acceptable in vivo model to determine AA digestibility of rumen bacteria. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  13. Fouling reduction by ozone-enhanced backwashing process in ultrafiltration of petroleum-based oil in water emulsion

    Science.gov (United States)

    Aryanti, Nita; Prihatiningtyas, Indah; Kusworo, Tutuk Djoko

    2017-06-01

    Ultrafiltration membrane has been successfully applied for oily waste water treatment. However, one significant drawback of membrane technology is fouling which is responsible for permeate flux decline as well as reducing membrane performance. One method commonly used to reduce fouling is a backwashing process. The backwashing is carried out by a push of reversed flow from permeate side to the feed side of a membrane to remove fouling on the membrane pore and release fouling release fouling layer on the external side. However, for adsorptive fouling, the backwashing process was not effective. On the other hand, Ozone demonstrated great performance for reducing organics fouling. Hence this research was focused on backwashing process with ozone for removing fouling due to ultrafiltration of petroleum based oil emulsion. Gasoline and diesel oil were selected as dispersed phase, while as continuous phase was water added with Tween 80 as a surfactant. This research found that the Ozone backwashing was effective to improve flux recovery. In ultrafiltration of gasoline emulsion, the flux recovery after Ozone backwashing was in the range of 42-74%. For ultrafiltration of diesel oil emulsion, the permeate flux recovery was about 35-84%. In addition, foulant deposition was proposed and predicting that foulant deposition for ultrafiltration of gasoline-in-water emulsion was surfactant as the top layer and the oil was underneath the surfactant. On the other hand, for ultrafiltration of diesel oil-in-water emulsion, the oil was predicted as a top layer above the surfactant foulant.

  14. Surfactant-enhanced recovery of dissolved hydrocarbons at petroleum production facilities

    International Nuclear Information System (INIS)

    Freeman, J.T.; Mayes, M.; Wassmuth, F.; Taylor, K.; Rae, W.; Kuipers, F.

    1997-01-01

    The feasibility and cost effectiveness of surfactant-enhanced pumping to reduce source concentrations of petroleum hydrocarbons from contaminated soils was discussed. Light non-aqueous phase liquids (LNAPL) hydrocarbons are present beneath many petroleum production processing facilities in western Canada. Complete removal of LNAPLs from geologic materials is difficult and expensive. Treatment technologies include costly ex-situ methods such as excavation and in-situ methods such as physical extraction by soil venting and pumping, bioremediation, and combination methods such as bioventing, bioslurping or air sparging. Surfactant-aided pumping can reduce source hydrocarbon concentrations when used in conjunction with traditional pump and treat, or deep well injection. This study involved the selection of an appropriate surfactant from a wide variety of commercially available products. A site contaminated by hydrocarbons in Turner Valley, Alberta, was used for field scale testing. One of the major problems was quantifying the increase in the dissolved hydrocarbon concentrations in the recovered water once a surfactant was added. From the 30 surfactants screened in a series of washing and oil solubilization tests, two surfactants, Brij 97 and Tween 80, were selected for further evaluation. Increased hydrocarbon recovery was observed within 10 days of the introduction of the first surfactant. 2 refs., 7 figs

  15. Characterization and spray drying of lipase produced by the endophytic fungus Cercospora kikuchii

    Directory of Open Access Journals (Sweden)

    T. A. Costa-Silva

    2014-12-01

    Full Text Available A lipase from the endophytic fungus Cercospora kikuchii was purified, biochemicall