WorldWideScience

Sample records for sonde electronique applications

  1. An electronic probe micro-analyser. A linear scan device; Microanalyseur a sonde electronique. Dispositif de balayage lineaire

    Energy Technology Data Exchange (ETDEWEB)

    Kirianenko, A; Maurice, F [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    The Castaing electronic probe micro-analyser makes possible static analysis at successive points. For two years this apparatus has been equipped by its constructor with an automatic device for surface scanning. In order to increase the micro-analyser's efficiency a 'linear' scan device has been incorporated making it possible to obtain semi-quantitative analyses very rapidly. (authors) [French] Le microanalyseur a sonde electronique de Castaing permet l'analyse statique en des points successifs. Depuis deux ans, cet appareil a ete equipe par son constructeur d'un dispositif de balayage automatique 'surface'. Afin d'augmenter l'efficacite du microanalyaeur, on a adapte un dispositif de balayage 'lineaire' qui permet d'obtenir tres rapidement des analyses semi-quantitative. (auteurs)

  2. New measurements in plutonium L X ray emission spectrum using an electron probe micro-analyser; Nouvelles mesures dans le spectre d'emission L du plutonium au moyen d'un micro analyseur a sonde electronique

    Energy Technology Data Exchange (ETDEWEB)

    Bobin, J L; Despres, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-07-01

    Further studies by means of an electron-probe micro-analyser, allowed report CEA-R--1798 authors to set up a larger plutonium X ray spectrum table. Measurements of plutonium L{sub II} and L{sub III} levels excitation potentials have also been achieved. Some remarks about apparatus performance data (such as spectrograph sensibility, resolving power and accuracy) will be found in the appendix. (authors) [French] Poursuivant les etudes exposees dans le rapport CEA-R--1798, les auteurs ont pu dresser un tableau plus etendu du spectre L du plutonium, au moyen du micro-analyseur a sonde electronique. Ils ont egalement effectue des mesures de potentiel d'excitation des niveaux L{sub II} et L{sub III} du plutonium. On trouvera en annexe quelques notes sur les constantes d'appareillage (sensibilite, pouvoir de resolution et precision des spectrographes). (auteurs)

  3. Contribution to the study of molecular movements in cyclohexane by electron spin resonance and electron-nuclear double resonance using a radical probe; Contribution a l'etude des mouvements moleculaires dans le cyclohexane par resonance paramagnetique electronique et double resonance electronique-nucleaire a l'aide d'une sonde radicalaire

    Energy Technology Data Exchange (ETDEWEB)

    Volino, F [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    Solutions of stable free radicals of the nitroxide type have been studied as a function of temperature. In the plastic or globular state, the cyclohexane molecules have rapid rotational and diffusional movements. They transmit this movement to dissolved free radicals. Conversely, measurements by electron spin resonance of the absolute movement of the radicals, and by electron nuclear double resonance of their movement relative to the cyclohexane molecules give very precise methods for local analyses of the movement present in the cyclohexane matrix. The principle of these techniques makes up the 'radical probe method'. (author) [French] Des solutions de radicaux libres stables, du type nitroxyde dans le cyclohexane ont ete etudiees, en fonction de la temperature. Les molecules de cyclohexane, dans l'etat plastique ou globulaire, sont animees de mouvements rapides de rotation sur elles-memes et de diffusion. Elles transmettent leur mobilite aux radicaux libres dissous. Reciproquement, la mesure du mouvement absolu des radicaux, a l'aide de la resonance paramagnetique electronique, et celle du mouvement relatif des radicaux et des molecules de cyclohexane par double resonance electronique-nucleaire, constituent des methodes tres precises pour analyser localement les mouvements presents dans la matrice de cyclohexane. Ce principe et ces techniques constituent la 'methode de la sonde radicalaire'. (auteur)

  4. Contribution to the study of molecular movements in cyclohexane by electron spin resonance and electron-nuclear double resonance using a radical probe; Contribution a l'etude des mouvements moleculaires dans le cyclohexane par resonance paramagnetique electronique et double resonance electronique-nucleaire a l'aide d'une sonde radicalaire

    Energy Technology Data Exchange (ETDEWEB)

    Volino, F. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    Solutions of stable free radicals of the nitroxide type have been studied as a function of temperature. In the plastic or globular state, the cyclohexane molecules have rapid rotational and diffusional movements. They transmit this movement to dissolved free radicals. Conversely, measurements by electron spin resonance of the absolute movement of the radicals, and by electron nuclear double resonance of their movement relative to the cyclohexane molecules give very precise methods for local analyses of the movement present in the cyclohexane matrix. The principle of these techniques makes up the 'radical probe method'. (author) [French] Des solutions de radicaux libres stables, du type nitroxyde dans le cyclohexane ont ete etudiees, en fonction de la temperature. Les molecules de cyclohexane, dans l'etat plastique ou globulaire, sont animees de mouvements rapides de rotation sur elles-memes et de diffusion. Elles transmettent leur mobilite aux radicaux libres dissous. Reciproquement, la mesure du mouvement absolu des radicaux, a l'aide de la resonance paramagnetique electronique, et celle du mouvement relatif des radicaux et des molecules de cyclohexane par double resonance electronique-nucleaire, constituent des methodes tres precises pour analyser localement les mouvements presents dans la matrice de cyclohexane. Ce principe et ces techniques constituent la 'methode de la sonde radicalaire'. (auteur)

  5. Development of a Low-Cost Arduino-Based Sonde for Coastal Applications

    Science.gov (United States)

    Lockridge, Grant; Dzwonkowski, Brian; Nelson, Reid; Powers, Sean

    2016-01-01

    This project addresses the need for an expansion in the monitoring of marine environments by providing a detailed description of a low cost, robust, user friendly sonde, built on Arduino Mega 2560 (Mega) and Arduino Uno (Uno) platforms. The sonde can be made without specialized tools or training and can be easily modified to meet individual application requirements. The platform allows for internal logging of multiple parameters of which conductivity, temperature, and GPS position are demonstrated. Two design configurations for different coastal hydrographic applications are highlighted to show the robust and versatile nature of this sensor platform. The initial sonde design was intended for use on a Lagrangian style surface drifter that recorded measurements of temperature; salinity; and position for a deployment duration of less than 24 h. Functional testing of the sensor consisted of a 55 h comparison with a regularly maintained water quality sensor (i.e., YSI 6600 sonde) in Mobile Bay, AL. The temperature and salinity data were highly correlated and had acceptable RMS errors of 0.154 °C and 1.35 psu for the environmental conditions. A second application using the sonde platform was designed for longer duration (~3–4 weeks); subsurface (1.5–4.0 m depths) deployment, moored to permanent structures. Design alterations reflected an emphasis on minimizing power consumption, which included the elimination of the GPS capabilities, increased battery capacity, and power-saving software modifications. The sonde designs presented serve as templates that will expand the hydrographic measurement capabilities of ocean scientists, students, and teachers. PMID:27089337

  6. Development of a Low-Cost Arduino-Based Sonde for Coastal Applications.

    Science.gov (United States)

    Lockridge, Grant; Dzwonkowski, Brian; Nelson, Reid; Powers, Sean

    2016-04-13

    This project addresses the need for an expansion in the monitoring of marine environments by providing a detailed description of a low cost, robust, user friendly sonde, built on Arduino Mega 2560 (Mega) and Arduino Uno (Uno) platforms. The sonde can be made without specialized tools or training and can be easily modified to meet individual application requirements. The platform allows for internal logging of multiple parameters of which conductivity, temperature, and GPS position are demonstrated. Two design configurations for different coastal hydrographic applications are highlighted to show the robust and versatile nature of this sensor platform. The initial sonde design was intended for use on a Lagrangian style surface drifter that recorded measurements of temperature; salinity; and position for a deployment duration of less than 24 h. Functional testing of the sensor consisted of a 55 h comparison with a regularly maintained water quality sensor (i.e., YSI 6600 sonde) in Mobile Bay, AL. The temperature and salinity data were highly correlated and had acceptable RMS errors of 0.154 °C and 1.35 psu for the environmental conditions. A second application using the sonde platform was designed for longer duration (~3-4 weeks); subsurface (1.5-4.0 m depths) deployment, moored to permanent structures. Design alterations reflected an emphasis on minimizing power consumption, which included the elimination of the GPS capabilities, increased battery capacity, and power-saving software modifications. The sonde designs presented serve as templates that will expand the hydrographic measurement capabilities of ocean scientists, students, and teachers.

  7. Probes and their application to the study of H.F. plasmoids; Les sondes et leur application dans l'etude des plasmoides H.F

    Energy Technology Data Exchange (ETDEWEB)

    Brunet, A; Geller, R [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    In the first part of this paper, we study the single Langmuir probe and the double-probe method. In the second part, we describe the probe-technique in connection with R.F. plasmoids. (author) [French] Dans la premiere partie de cet article, nous rappelons les principes d'utilisation de la sonde simple de Langmuir ainsi que la methode de la sonde double. La seconde partie est consacree a la pratique des sondes dans l'etude des plasmoides H.F. (auteur)

  8. Caliper variable sonde for thermal conductivity measurements in situ

    Energy Technology Data Exchange (ETDEWEB)

    Oelsner, C; Leischner, H; Pischel, S

    1968-01-01

    For the measurement of the thermal conductivity of the formations surrounding a borehole, a sonde having variable diameter (consisting of an inflatable rubber cylinder with heating wires embedded in its wall) is described. The conditions for the usual sonde made of metal are no longer fulfilled, but the solution to the problem of determining the thermal conductivity from the temperature rise is given, based on an approach by Carslaw and Jaeger, which contains the Bessel functions of the second kind. It is shown that a simpler solution for large values of time can be obtained through the Laplace transformation, and the necessary series developments for computer application are also given. The sonde and the necessary measuring circuitry are described. Tests measurements have indicated that the thermal conductivity can be determined with this sonde with a precision of + 10%.

  9. Atmospheric Sondes and Method for Tracking

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A system for wind profiling comprises sondes for being borne through the atmosphere by balloons and transmitting signals enabling identifying the sondes, and...

  10. Statistical treatment of data. Application to nuclear electronics; Traitement des informations en regime statistique. Applications a l'electronique nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Sicard, F [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    In this report the data of probability calculations are applied to the analyses of counting losses in experiments on chance events encountered in nuclear physics. The distribution of time intervals according to Poisson's law is studied and various applications of this are given: calculation of counting losses on a scale preceded by a fast de-multiplying circuit, decrease of the counting rate on the multichannel selectors, recording of statistical distribution phenomena on magnetic bands. (author) [French] Ce rapport applique les donnees du calcul des probabilites a l'analyse des pertes de comptage dans les experiences sur des evenements aleatoires rencontres en physique nucleaire. La distribution des intervalles de temps suivant une loi de Poisson est etudiee et differentes applications en sont donnees: calcul des pertes de comptage sur une echelle precedee d'un circuit de demultiplication rapide, diminution du taux de comptage sur les selecteurs multicanaux, enregistrement de phenomenes a distribution statistique sur bandes magnetiques. (auteur)

  11. Calibration of langmuir probes by a microwave method; Etalonnage des sondes de langmuir par une methode hyperfrequence

    Energy Technology Data Exchange (ETDEWEB)

    Consoli, T [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Measurements of the electronic density of a plasma between 10{sup 6} and 10{sup 8} e/cm{sup 3}, made by the Langmuir probe and by resonance frequency shift of a cavity are compared. (author) [French] On compare les mesures de la densite electronique d'un plasma peu dense 10{sup 6} < ne < 10{sup 8} e/cm{sup 3}, par sonde de Langmuir et par glissement de la frequence de resonance d'une cavite contenant le plasma. (auteur)

  12. Progressive and resonant wave helices application to electron paramagnetic resonance; Helices a ondes progressives et resonnantes application a la resonance paramagnetique electronique

    Energy Technology Data Exchange (ETDEWEB)

    Volino, F [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    We show that helices can be used as resonant systems. Their properties are theoretically and experimentally studied. We describe resonant helices for electron paramagnetic resonance in X-band and develop a comparison between their sensitivity and the sensitivity of a normal resonant cavity. For cylindrical samples less than 3 mm diameter, the helix is more sensitive and can produce more intense microwave magnetic fields. (author) [French] Il est montre que les helices peuvent etre utilisees comme systeme resonnant. Leurs proprietes sont discutees theoriquement et experimentalement. Des helices resonnantes en bande X pour la resonance paramagnetique electronique sont decrites et leur sensibilite est comparee a celle des cavites resonnantes. Pour des echantillons cylindriques de moins de 3 mm de diametre, l'helice est plus sensible et peut produire des champs magnetiques hyper fins plus intenses. (auteur)

  13. Magnetic rotational polarisation in plasmas. Application to the measurement of electronic density; Polarisation rotatoire magnetique dans les plasmas. Application a la mesure de la densite electronique

    Energy Technology Data Exchange (ETDEWEB)

    Consoli, Terenzio; Dagai, Michel [Commissariat a l' energie atomique et aux energies alternatives - CEA (France)

    1960-07-01

    The rotation of a linearly polarised wave passing through a layer of plasma is determined. A network of curves enables these results to be applied to the electronic density measurement in a plasma during its evolution. Reprint of a paper published in Comptes rendus des seances de l'Academie des Sciences, t. 250, p. 1010-1012, sitting of 8 February 1960 [French] On determine la rotation d'une onde polarisee lineairement, traversant une couche de plasma. Un reseau de courbes permet d'appliquer ces resultats a la mesure de la densite electronique d'un plasma en evolution. Reproduction d'un article publie dans les Comptes rendus des seances de l'Academie des Sciences, t. 250, p. 1010-1012, seance du 8 fevrier 1960.

  14. Progressive and resonant wave helices application to electron paramagnetic resonance; Helices a ondes progressives et resonnantes application a la resonance paramagnetique electronique

    Energy Technology Data Exchange (ETDEWEB)

    Volino, F. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    We show that helices can be used as resonant systems. Their properties are theoretically and experimentally studied. We describe resonant helices for electron paramagnetic resonance in X-band and develop a comparison between their sensitivity and the sensitivity of a normal resonant cavity. For cylindrical samples less than 3 mm diameter, the helix is more sensitive and can produce more intense microwave magnetic fields. (author) [French] Il est montre que les helices peuvent etre utilisees comme systeme resonnant. Leurs proprietes sont discutees theoriquement et experimentalement. Des helices resonnantes en bande X pour la resonance paramagnetique electronique sont decrites et leur sensibilite est comparee a celle des cavites resonnantes. Pour des echantillons cylindriques de moins de 3 mm de diametre, l'helice est plus sensible et peut produire des champs magnetiques hyper fins plus intenses. (auteur)

  15. Onset in-river conductivity sonde data

    Data.gov (United States)

    U.S. Environmental Protection Agency — Onset HOBO Model U24-01 in-river sondes were deployed to measure water temperature and electrical conductivity at each of the ISCO sampling sites at 5 min intervals....

  16. The thin layer technique and its application to electron microscopy; La technique des couches minces et son application a la microscopie electronique

    Energy Technology Data Exchange (ETDEWEB)

    Ranc, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-10-15

    This work deals with the technique of thin layers obtained by evaporation under vacuum, in the thickness range extending from a few monoatomic layers to several hundred angstroms. The great theoretical and practical interest of these layers has, it is well known, given rise to many investigations from Faraday onwards. Within the necessarily restricted limits of this study, we shall approach the problem more particularly from the point of view of: - their production; - their use in electron microscopy. A critical appraisal is made, in the light of present-day knowledge, based on our personal experience and on an extensive bibliography which we have collected on the subject. (author) [French] Le present travail concerne la technique des couches minces obtenues par evaporation sous vide, dans le domaine d'epaisseur qui s'etend de quelques couches monoatomiques a plusieurs centaines d'angstroms. L'interet theorique et pratique considerable de ces couches a suscite, comme on sait, de nombreux travaux depuis Faraday. Dans le cadre necessairement restreint de cette these, nous aborderons plus particulierement le point de vue de: - leur obtention; - leur utilisation en microscopie electronique. Il s'agit d'une mise au point critique, a la lumiere des connaissances actuelles, appuyee sur notre experience personnelle et sur une importante bibliographie, qu'il nous a ete donne de reunir a ce sujet. (auteur)

  17. The thin layer technique and its application to electron microscopy; La technique des couches minces et son application a la microscopie electronique

    Energy Technology Data Exchange (ETDEWEB)

    Ranc, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-10-15

    This work deals with the technique of thin layers obtained by evaporation under vacuum, in the thickness range extending from a few monoatomic layers to several hundred angstroms. The great theoretical and practical interest of these layers has, it is well known, given rise to many investigations from Faraday onwards. Within the necessarily restricted limits of this study, we shall approach the problem more particularly from the point of view of: - their production; - their use in electron microscopy. A critical appraisal is made, in the light of present-day knowledge, based on our personal experience and on an extensive bibliography which we have collected on the subject. (author) [French] Le present travail concerne la technique des couches minces obtenues par evaporation sous vide, dans le domaine d'epaisseur qui s'etend de quelques couches monoatomiques a plusieurs centaines d'angstroms. L'interet theorique et pratique considerable de ces couches a suscite, comme on sait, de nombreux travaux depuis Faraday. Dans le cadre necessairement restreint de cette these, nous aborderons plus particulierement le point de vue de: - leur obtention; - leur utilisation en microscopie electronique. Il s'agit d'une mise au point critique, a la lumiere des connaissances actuelles, appuyee sur notre experience personnelle et sur une importante bibliographie, qu'il nous a ete donne de reunir a ce sujet. (auteur)

  18. Applications of electron spin resonance to some problems of radiation chemistry; Applications de la resonance paramagnetique electronique a quelques problemes de chimie sous rayonnements

    Energy Technology Data Exchange (ETDEWEB)

    Chachaty, C [Commissariat a l' Energie Atomique Saclay (France). Centre d' Etudes Nucleaires

    1968-06-01

    The electron spin resonance (E.S.R.) spectra of gamma irradiated polar organic glasses, at 77 K, shows a single line centered at g {approx} 2, attributed to solvated electrons. The radicals produced on scavenging this species by electron acceptors, such as aromatic hydrocarbons, nitro-compounds and azines have been studied by E.S.R. In most cases, the radicals from these solutes, the spectra of which are observed after elimination by warming of the radicals from the matrices, are produced by protonation of the anions formed by scavenging of electrons at 77 K. Thus, in the case of glassy solutions of nitro-compounds, the radicals R NO{sub 2}H are formed. They are characterized by a{sub N} = 15 G (nitrobenzene) or a{sub N} = 28 G (nitro-alkane). These radicals are also generated by U.V, photolysis at room temperature of solutions of nitro-compounds in alcohols and are shown to be the precursors of nitroxide radicals R - N - R (with N - O) observed simultaneously. Gamma irradiation of solutions of pyridine and of the three diazines, in alcohol glasses at 77 K, produces the radical formed by hydrogen addition to these compounds. The value of the coupling constant of the additional proton (7-10 G) indicates that it is bound to a nitrogen in the sp{sup 2} hydridation state. One has shown, taking pyridine as an example, that the addition to a carbon gives a much greater value of the coupling constant, of the order of 50-60 G. (author) [French] Les spectres de resonance paramagnetique electronique (R.P.E.) obtenus apres irradiation gamma, a 77 K, de verres organiques polaires tels que les alcools, comportent une bande unique centree a g {approx} 2, attribuable aux electrons solvates. On etudie par R.P.E. les radicaux provenant de leur capture par des solutes ayant une affinite electronique, en particulier les hydrocarbures aromatiques, les composes nitres et les azines. En general, les radicaux provenant de ces solutes, dont on observe les spectres apres elimination

  19. Electronic specific heat of transition metal carbides; Chaleur specifique electronique de carbures de metaux de transition

    Energy Technology Data Exchange (ETDEWEB)

    Conte, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-15

    The experimental results that make it possible to define the band structure of transition metal carbides having an NaCI structure are still very few. We have measured the electronic specific heat of some of these carbides of varying electronic concentration (TiC, either stoichiometric or non-stoichiometric, TaC and mixed (Ti, Ta) - C). We give the main characteristics (metallography, resistivity, X-rays) of our samples and we describe the low temperature specific heat apparatus which has been built. In one of these we use helium as the exchange gas. The other is set up with a mechanical contact. The two use a germanium probe for thermometer. The measurement of the temperature using this probe is described, as well as the various measurement devices. The results are presented in the form of a rigid band model and show that the density of the states at the Fermi level has a minimum in the neighbourhood of the group IV carbides. (author) [French] Les donnees experimentales permettant de preciser la structure de bandes des carbures de metaux de transition de structure NaCI sont encore peu.nombreuses. Nous avons mesure la chaleur specifique electronique de certains de ces carbures, de differentes concentrations electroniques (TiC stoechiometrique ou non, TaC et mixtes (Ti, Ta) - C). Nous donnons les principales caracteristiques (metallographie, resistivite, rayon X), de nos echantillons, et nous decrivons l'appareillage de chaleur specifique a basse temperature realise. Dans l'un nous utilisons l'helium comme gaz d'echange. L'autre est monte avec un contact mecanique. Les deux utilisent une sonde au germanium comme thermometre. La mesure de la resistance de cette sonde est decrite, ainsi que les differents montages de mesure. Les resultats, presentes dans un modele de bande rigide, font apparaitre que la densite des etats au niveau de Fermi presente un minimum au voisinage des carbures du groupe IV. (auteur)

  20. Evaluation of the Hydrolab HL4 water-quality sonde and sensors

    Science.gov (United States)

    Snazelle, Teri T.

    2017-12-18

    The U.S. Geological Survey (USGS) Hydrologic Instrumentation Facility evaluated three Hydrolab HL4 multiparameter water-quality sondes by OTT Hydromet. The sondes were equipped with temperature, conductivity, pH, dissolved oxygen (DO), and turbidity sensors. The sensors were evaluated for compliance with the USGS National Field Manual for the Collection of Water-Quality Data (NFM) criteria for continuous water-quality monitors and to verify the validity of the manufacturer’s technical specifications. The conductivity sensors were evaluated for the accuracy of the specific conductance (SC) values (conductance at 25 degrees Celsius [oC]), that were calculated by using the vendor default method, Hydrolab Fresh. The HL4’s communication protocols and operating temperature range along with accuracy of the water-quality sensors were tested in a controlled laboratory setting May 1–19, 2016. To evaluate the sonde’s performance in a surface-water field application, an HL4 equipped with temperature, conductivity, pH, DO, and turbidity sensors was deployed June 20–July 22, 2016, at USGS water-monitoring site 02492620, Pearl River at National Space Technology Laboratories (NSTL) Station, Mississippi, located near Bay Saint Louis, Mississippi, and compared to the adjacent well-maintained EXO2 site sonde.The three HL4 sondes met the USGS temperature testing criteria and the manufacturer’s technical specifications for temperature based upon the median room temperature difference between the measured and standard temperatures, but two of the three sondes exceeded the allowable difference criteria at the temperature extremes of approximately 5 and 40 ºC. Two sondes met the USGS criteria for SC. One of the sondes failed the criteria for SC when evaluated in a 100,000-microsiemens-per-centimeter (μS/cm) standard at room temperature, and also failed in a 10,000-μS/cm standard at 5, 15, and 40 ºC. All three sondes met the USGS criteria for pH and DO at room temperature

  1. Resonance probe; La sonde a resonance

    Energy Technology Data Exchange (ETDEWEB)

    Lepechinsky, D; Messiaen, A; Rolland, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-07-01

    After a brief review of papers recently published on the resonance probe as a tool for plasma diagnostics, the main features of the theory proposed by one of us are recalled. In this theory the geometry of the resonator formed by the probe, the ion sheath and the plasma is explicitly taken into account with the quasi-static and cold plasma approximations. Some new results emerging from this theory are indicated and a comparison with experimental data obtained with a spherical probe placed in a quiescent mercury-vapour plasma is made. A good quantitative agreement has been observed, indicating that the theory is satisfactory and justifying the assumptions involved. Nevertheless it appears that in some cases experimental results can only be interpreted when non collisional damping phenomena are taken into consideration. (author) [French] Apres un apercu des etudes recemment publiees sur la sonde a resonance pour le diagnostic des plasmas, on rappelle l'essentiel de la theorie proposee par l'un de nous ou il est tenu compte explicitement de la geometrie du resonateur forme par le systeme sonde-gaine ionique-plasma dans l'approximation quasi-statique et du plasma froid. On indique quelques resultats nouveaux pouvant etre tires de cette theorie et on la confronte avec les donnees experimentales obtenues pour une sonde spherique placee dans un plasma de mercure en equilibre. Un tres bon accord quantitatif a ete constate, indiquant que la theorie est satisfaisante et justifiant les approximations faites dans celle-ci. Il apparait toutefois que certains resultats experimentaux ne peuvent etre interpretes qu'en tenant compte des phenomenes d'amortissement non collisionnels. (auteur)

  2. Study of secondary electronic emission in some piezo-electric materials: application to ultrasonic visualization; Etude de l'emission electronique secondaire de quelques materiaux piezoelectriques: application a la visualisation ultrasonore

    Energy Technology Data Exchange (ETDEWEB)

    Marini, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    Methods allowing the visualization of acoustic images appear at the moment to be of great interest in the field of non-destructive testing as well as in that of underwater detection. In order to carry out certain calculations on the operation of an ultrasonic camera, it has been necessary to study the secondary electron emission of some piezoelectric materials liable to be incorporated into the equipment. The secondary electron emission of insulators is a rather complex phenomenon; in order to find a rational explanation for the observations made, a theory has been developed for the energy spectrum of the emitted electrons. The experimental results of this work have then been used to build an ultrasonic visualization installation. Some examples of acoustic images which have been visualized are also presented. (author) [French] Les methodes qui permettent de visualiser des images acoustiques trouvent a l'heure actuelle un grand interet dans le domaine du controle non destructif comme dans celui de la detection sous-marine. De maniere a effectuer certains calculs sur le fonctionnement d'une camera ultrasons, il a ete necessaire d'etudier l'emission electronique secondaire de quelques materiaux piezoelectriques susceptibles d'etre utilises dans sa construction. L'emission electronique secondaire des isolants est un phenomene assez complexe et de maniere a trouver des explications coherentes aux observations effectuees, une theorie du spectre energetique des electrons emis a ete elaboree. Une installation de visualisation ultrasonore a alors ete realisee a partir des donnees experimentales de cette etude. Quelques exemples d'images acoustiques visualisees par cette methode sont egalement presentees. (auteur)

  3. Study of secondary electronic emission in some piezo-electric materials: application to ultrasonic visualization; Etude de l'emission electronique secondaire de quelques materiaux piezoelectriques: application a la visualisation ultrasonore

    Energy Technology Data Exchange (ETDEWEB)

    Marini, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    Methods allowing the visualization of acoustic images appear at the moment to be of great interest in the field of non-destructive testing as well as in that of underwater detection. In order to carry out certain calculations on the operation of an ultrasonic camera, it has been necessary to study the secondary electron emission of some piezoelectric materials liable to be incorporated into the equipment. The secondary electron emission of insulators is a rather complex phenomenon; in order to find a rational explanation for the observations made, a theory has been developed for the energy spectrum of the emitted electrons. The experimental results of this work have then been used to build an ultrasonic visualization installation. Some examples of acoustic images which have been visualized are also presented. (author) [French] Les methodes qui permettent de visualiser des images acoustiques trouvent a l'heure actuelle un grand interet dans le domaine du controle non destructif comme dans celui de la detection sous-marine. De maniere a effectuer certains calculs sur le fonctionnement d'une camera ultrasons, il a ete necessaire d'etudier l'emission electronique secondaire de quelques materiaux piezoelectriques susceptibles d'etre utilises dans sa construction. L'emission electronique secondaire des isolants est un phenomene assez complexe et de maniere a trouver des explications coherentes aux observations effectuees, une theorie du spectre energetique des electrons emis a ete elaboree. Une installation de visualisation ultrasonore a alors ete realisee a partir des donnees experimentales de cette etude. Quelques exemples d'images acoustiques visualisees par cette methode sont egalement presentees. (auteur)

  4. Design of a transport calculation system for logging sondes simulation

    International Nuclear Information System (INIS)

    Marquez Damian, Jose Ignacio

    2005-01-01

    Analysis of available resources in earth crust is performed by different techniques, one of them is neutron logging. Design of sondes that are used to make such logging is supported by laboratory experiments as well as by numerical calculations.This work presents several calculation schemes, designed to simplify the task of whom has to planify such experiments or optimize parameters of this kind of sondes.These schemes use transport calculation codes, especially DaRT, TORT and MCNP, and cross section processing modules from SCALE system.Additionally a system for DaRT and TORT data postprocessing using OpenDX is presented.It allows scalar flux spatial distribution analysis, as wells as cross section condensation and reaction rates calculation

  5. Intercomparison of ozone measurements between Lidar and ECC-sondes

    Energy Technology Data Exchange (ETDEWEB)

    Grabbe, G.C. [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); Boesenberg, J. [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); Dier, H. [Meteorologisches Obs., Lindenberg (Germany); Goersdorf, U. [Meteorologisches Obs., Lindenberg (Germany); Matthias, V. [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); Peters, G. [Meteorologisches Obs., Lindenberg (Germany); Schaberl, T. [Hamburg Univ. (Germany). Meteorologisches Inst.; Senff, C. [Hamburg Univ. (Germany). Meteorologisches Inst.

    1996-02-01

    An intercomparison experiment for measurements of ozone vertical profiles in the lower troposphere was performed using a ground-based ozone DIAL (DIfferential Absorption Lidar) and ECC-sondes (Electrochemical Concentration Cell) attached to tethered as well as free flying balloons, which took place in June of 1994. The tethered balloon was used for ozone soundings in the planetary boundary layer up to an altitude of 500 m, while in the free troposphere free flying balloons were used. For the time series of up to 90 min obtained with the tethersondes both averages and standard deviations are compared. The mean difference for all measurements amounted to 3.5 {mu}g/m{sup 3} only, corresponding to 3.5%. For the instantaneous profiles compared to the free flying sondes the differences were only marginally larger, with a mean value of 3.6 {mu}g/m{sup 3} corresponding to 4.1%. With two exceptions all averages for a single profile stayed below 7 {mu}g/m{sup 3}. Larger individual excursions were observed. In some cases, in particular in regions of steep aerosol gradients at layer boundaries, most probably the lidar values cause the deviation, while in other cases the ECC-sonde is suspected to yield erroneous results. For the measured standard deviation those retrieved from DIAL measurements are generally larger than measured by the ECC-sondes, especially in regions of inhomogeneous aerosol distribution. For the measurements reported here, this is attributed to residual errors in the aerosol correction of the DIAL measurements. The general agreement found in this intercomparison is regarded as excellent, DIAL is proven to be a very valuable tool for detailed studies of the ozone distribution in the lower troposphere. (orig.)

  6. Applications of electrical resistivity measurements to research into the purification of uranium using floating molten zone by electronic bombardment; Applications des mesures de resistivite electrique a l'etude de la purification de l'uranium par fusion de zone flottante par bombardement electronique

    Energy Technology Data Exchange (ETDEWEB)

    Pascal, J L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-02-01

    The purification of uranium has been achieved by zone melting. Because of the high affinity of uranium towards elements such as oxygen, contamination has been avoided by adopting the floating zone technique and by working under high vacuum. The difficulties created by the deformations of uranium rod, which are caused by anisotropy of dilatation of phases {alpha} and {beta} and allotropic transformations {alpha} {r_reversible} {beta} and {beta} {r_reversible} {alpha}, have been overcome by the use of electron bombardment stabilized by feedback. A rough control of the purification was obtained by micrographic examination, microhardness measurements, and tests of secondary recrystallization, allowed us to appreciate the new degree of purity of the uranium obtained. The investigation of the purity degree was pursued by electrical resistivity measurements at 20 deg. K. But one had to take care in the interpretation of those measurements of the anisotropy of the uranium resistivity and the influence of structure on residual resistivity. Those measurements have led us, by determination of single crystal and uranium resistivity, to be able to distinguish between the principal resistivity against axis [100] and [010]. (author) [French] La purification de l'uranium a ete realisee par l'application de la methode dite de la zone fondue. L'uranium etant particulierement reactif vis-a-vis d'elements tels que l'oxygene, les risques de contamination ont ete supprimes en adoptant la technique de la zone flottante et en operant sous vide eleve. Les difficultes creees par les deformations du barreau d'uranium, dues a l'anisotropie de dilatation des phases {alpha} et {beta} et ou passage des deux points de transformation allotropiques {alpha} {r_reversible} {beta} et {beta} {r_reversible} {alpha}, ont pu etre surmontees par l'emploi du chauffage par bombardement electronique, stabilise par un systeme tres simple de contre reaction. Un premier controle de la purification effectue par

  7. Study of hydrogenated amorphous silicon devices under intense electric field: application to nuclear detection; Etude de dispositifs electroniques en silicium amorphe hydrogene sous fort champ electrique: application a la detection nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Ilie, A. [CEA Centre d`Etudes de Saclay, 91 - Gif-sur-Yvette (France). Direction des Technologies Avancees]|[Paris-11 Univ., 91 - Orsay (France)

    1996-12-31

    The goal of this work was the study, development and optimization of hydrogenated amorphous silicon (a-Si:H) devices for use in detection of ionizing radiation. Thick p-i-n devices, capable of withstanding large electric fields (up to 10{sup 6} V/cm) with small currents (nA/cm{sup 2}), were developed. To decrease fabrication time, films were made using the `He diluted` PECVD process and compared to standard a-Si:H films. Aspects connected to specific detector applications as well as to the fundamental physics of a-Si:H were considered: the internal electric field technique, in which the depletion charge was measured as a function of the applied bias voltage; study of the leakage current of p-i-n devices permitted us to demonstrate different regimes: depletion, field-enhanced thermal generation and electronic injection across the p layer. The effect of the electric field on the thermal generation of the carriers was studied considering the Poole-Frenkel and tunneling mechanisms. A model was developed taking under consideration the statistics of the correlated states and electron-phonon coupling. The results suggest that mechanisms not included in the `standard model` of a Si:h need to be considered, such as defect relaxation, a filed-dependent mobility edge etc...; a new metastable phenomenon, induced by prolonged exposure to a strong electric field, was observed and studied. It is characterized by marked decrease of the leakage current and the detector noise, and increase in the breakdown voltage, as well as an improvement of carrier collection efficiency. This forming process appears to be principally due to an activation of the dopants in the p layer; finally, the capacity of thick p-i-n a Si:H devices to detect ionizing radiation has been evaluated. We show that it is possible, with 20-50 micron thick p-i-n devices, to detect the full spectrum of alpha and beta particles. With an appropriate converter, neutron detection then becomes possible. (author). 137 refs.

  8. Electronic sorting of radioactive ores; Triage electronique des minerais radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Sandier, J.

    1958-01-15

    Electronic sorting of radioactive ores consists in passing the rock lumps, after sieving, one by one in front of radioactivity detectors; these detectors command electromechanical systems which class the ores according to their radioactivity level. This note sets on the state of progress of the work going on at the D.R.E.M.: use of scintillometers for γ-ray detection, with circuits carrying magnetic memories to improve their operation; results of laboratory and semi-industrial tests on several deposits; description of the material, data on the first factory project; notes on the financial returns of the process. A description is also given of the electronic sorting material used skip by skip for a first rough classification of the ores according to their content, as they leave the shaft. (author) [French] Le triage electronique des minerais radioactifs consiste a faire passer, apres criblage, les cailloux un par un devant des detecteurs de radioactivite; ces detecteurs commandent des systemes electromecaniques qui classent les minerais selon leur niveau de radioactivite. La note expose l'etat d'avancement des travaux en cours a la D.R.E.M: utilisation des scintillometres pour la detection des rayonnements γ, de circuits comportant des memoires magnetiques pour ameliorer le fonctionnement; resultats d'essais de laboratoire et semi-industriels sur plusieurs gisements; description du materiel, donnees sur le premier projet d'usine; notes sur la rentabilite du procede. Est egalement decrit le materiel de triage electronique skip par skip utilise pour une premiere classification grossiere des minerais selon leurs teneurs, des la sortie des puits. (auteur)

  9. Fundamental study of ionization and dissociation processes caused by electron impact in aromatic molecules; application of the quasi-equilibrium theory to phenanthrene and to methylphenanthrenes; Etudes fondamentales des processus d'ionisation et de dissociation des molecules aromatiques par impact electronique et application de la theorie du quasi-equilibre au phenanthrene et aux methyl-phenanthrenes

    Energy Technology Data Exchange (ETDEWEB)

    Nounou, P [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    The quasi-equilibrium theory has been applied only to the family of long chain aliphatic hydrocarbons. We have tried to extend it to phenanthrene and methyl-phenanthrenes molecules, i.e. to aromatic molecules possessing a great number of degrees of freedom. In a first part, we have attempted to give a method of interpretation of the ionization and dissociation processes of the phenanthrenic molecules. These preliminary experimental studies of the behaviour under electron impact of the compounds provide us a great wealth of information about important structural transformations of the molecular and fragment ions, and also about auto-ionization and excitation processes of the studied molecules. The experimental study of the metastable peaks has then confirmed the validity of the preceding dissociation processes, while it gave with more accuracy some thermodynamical values in connection with decomposition reactions. The three studies of the ionization, then dissociation processes and of the metastable peaks, represent the three phases of a general method of interpretation of the fragmentation in mass spectrometry. In order to give this method a theoretical basis, we have carried out the molecular diagrams of each of the studied, compounds, showing by this way the aid of Quantum Mechanics to the study of excited and ionic states. In a second part, we have carried out the mass spectra of the phenanthrene and methyl-phenanthrenes molecules by means of the rate constants expression given by ROSENSTOCK. We have proposed new methods of calculation of the frequency factors, for the aliphatic molecules as well as the aromatic ones. If the rather good agreement observed between the experimental and calculated results cannot be surely attributed to the validity of the theory, however it out-lines the interest presented by the application of this theory to large aromatic molecules. Furthermore, the results at which we arrived provide us with interesting information about the

  10. Climatology 2011: An MLS and Sonde Derived Ozone Climatology for Satellite Retrieval Algorithms

    Science.gov (United States)

    McPeters, Richard D.; Labow, Gordon J.

    2012-01-01

    The ozone climatology used as the a priori for the version 8 Solar Backscatter Ultraviolet (SBUV) retrieval algorithms has been updated. The Microwave Limb Sounder (MLS) instrument on Aura has excellent latitude coverage and measures ozone daily from the upper troposphere to the lower mesosphere. The new climatology consists of monthly average ozone profiles for ten degree latitude zones covering pressure altitudes from 0 to 65 km. The climatology was formed by combining data from Aura MLS (2004-2010) with data from balloon sondes (1988-2010). Ozone below 8 km (below 12 km at high latitudes) is based on balloons sondes, while ozone above 16 km (21 km at high latitudes) is based on MLS measurements. Sonde and MLS data are blended in the transition region. Ozone accuracy in the upper troposphere is greatly improved because of the near uniform coverage by Aura MLS, while the addition of a large number of balloon sonde measurements improves the accuracy in the lower troposphere, in the tropics and southern hemisphere in particular. The addition of MLS data also improves the accuracy of climatology in the upper stratosphere and lower mesosphere. The revised climatology has been used for the latest reprocessing of SBUV and TOMS satellite ozone data.

  11. Modified ECC ozone sonde for long-duration flights aboard isopicnic drifting balloons

    Science.gov (United States)

    Gheusi, Francois; Durand, Pierre; Verdier, Nicolas; Dulac, François; Attié, Jean-Luc; Commun, Philippe; Barret, Brice; Basdevant, Claude; Clénet, Antoine; Fontaine, Alain; Jambert, Corinne; Meyerfeld, Yves; Roblou, Laurent; Tocquer, Flore

    2015-04-01

    Since few years, the French space agency CNES has developed boundary-layer pressurized balloons (BLPB) with the capability to transport scientific payloads at isopicnic level over very long distances and durations (up to several weeks in absence of navigation limits). However, the autonomy of conventional electrochemical concentration cell (ECC) ozone sondes, that are widely used for tropospheric and stratospheric soundings, is limited to few hours due to power consumption and electrolyte evaporation (owing to air bubbling in the cathode solution). In collaboration with the French research community, CNES has developed a new ozone payload suited for long duration flights aboard BLPB. The mechanical elements (Teflon pump and motor) and the electrochemical cell of conventional ECC sondes have been kept but the electronic implementation is entirely new. The main feature is the possibility of programming periodic measurement sequences -- with possible remote control during the flight. To increase the ozone sonde autonomy, a strategy has been adopted of short measurement sequences (typically 2-3 min) regularly spaced in time (e.g. every 15 min, which is usually sufficient for air quality studies). The rest of the time, the sonde is at rest (pump motor off). The response time of an ECC sonde to an ozone concentration step is below one minute. Consequently, the measurement sequence is typically composed of a one-minute spin-up period after the pump has been turned on, followed by a one- to two-minute acquisition period. All time intervals can be adjusted before and during the flight. Results of a preliminary ground-based test in spring 2012 are first presented. The sonde provided correct ozone concentrations against a reference UV analyzer every 15 minutes during 4 days. Then we illustrate results from 16 BLBP flights launched in the low troposphere over the Mediterranean during summer field campaings in 2012 and 2013 (TRAQA and ChArMEx programmes). BLPB drifting

  12. Evaluation of the Eureka Manta2 Water-Quality Multiprobe Sonde

    Science.gov (United States)

    Tillman, Evan F.

    2017-11-08

    Two Eureka Manta2 3.5 water-quality multiprobe sondes by Eureka Water Probes were tested at the U.S. Geological Survey (USGS) Hydrologic Instrumentation Facility (HIF) against known standards over the sonde operating temperatures to verify the manufacturer’s stated accuracy specifications for pH, specific conductance (SC) at 25 degrees Celsius (°C), dissolved oxygen (DO), and turbidity. The Manta2 sondes were evaluated for compliance with the USGS National Field Manual for the Collection of Water-Quality Data (NFM) criteria for continuous water-quality monitors, and for compliance with the manufacturer’s technical specifications. The Manta2 was also evaluated for its compliance to Serial Digital Interface at 1200 baud (SDI-12) version 1.3.The Manta2 met the NFM recommendations and manufacturer’s accuracy specifications for DO and turbidity at all values tested. The Manta2 pH sensors met the NFM recommendations and manufacturer’s accuracy specification for nominal pH values of 10 and lower. One of the two sensors was out of compliance by 1.2 units for pH 11.16 at 15 °C and by 0.25 unit for pH 10.78 at 40 °C. The Manta2 sensors were within the NFM recommendations for SC, except at 100 microsiemens (μS/cm) at 40 °C, where the SC sensor exceeded the test standard value by as much as 25 percent. One of two sensors was within manufacturer’s accuracy specifications at 25 °C for all the tested SC values, while the other SC sensor was outside the manufacturer’s accuracy specifications at 100 μS/cm, exceeding the test standard value by 9 percent. One of two sensors was outside the manufacturer’s accuracy specifications at 10,000 μS/cm at 15°C, exceeding the test standard value by 3 percent. One Manta2 passed SDI-12 compliance testing with a NR Systems SDI-12 Verifier. One Manta2 was field tested for 6 weeks at USGS station 02492620, National Space Technology Laboratories (NSTL) Station, Mississippi, on the Pearl River and showed overall good agreement

  13. Field intercomparison of channel master ADCP with RiverSonde Radar for measuring river discharge

    Science.gov (United States)

    Spain, P.; Marsden, R.; Barrick, D.; Teague, C.; Ruhl, C.

    2005-01-01

    The RiverSonde radar makes non-contact measurement of a horizontal swath of surface velocity across a river section. This radar, which has worked successfully at several rivers in the Western USA, has shown encouraging correlation with simultaneous measurements of average currents at one level recorded by an acoustic travel-time system. This work reports a field study intercomparing data sets from a 600 kHz Channel Master ADCP with the RiverSonde radar. The primary goal was to begin to explore the robustness of the radar data as a reliable index of discharge. This site Is at Three Mile Slough in Northern California, USA. The larger intent of the work is to examine variability in space and time of the radar's surface currents compared with subsurface flows across the river section. Here we examine data from a couple of periods with strong winds. ?? 2005 IEEE.

  14. Invagination intestinale sur sonde de jéjunostomie: à propos d'un cas

    African Journals Online (AJOL)

    L'invagination intestinale sur sonde de jéjunostomie est une complication très rare.Nous rapportons le cas d'un patient âgé de 28 ans ayant ingéré l'esprit de sel dans le cadre d'une tentative de suicide. Une fibroscopie 'sogastroduodénale a montré des lésions oesophagiennes et gastriques stade IIb selon la classification ...

  15. Five Blind Men and an Elephant: Comparing Aura Ozone Datasets and Sonde with Model Simulations

    Science.gov (United States)

    Tang, Q.; Prather, M. J.

    2011-12-01

    The four Earth Observing System (EOS) Aura satellite ozone measurements (HIRDLS, MLS, OMI, and TES) as well as the coincident WOUDC sonde are the five ``blind men'' touching the ``elephant'' (ozone). They all measure ozone (O3) in the upper troposphere and lower stratosphere (UT/LS) region, providing the great opportunity to study how the tropospheric ozone is influenced by the stratospheric source, an important tropospheric ozone budget term with large uncertainties and discrepancies across different models and methods. Based upon the 2-D autocorrelation for the tropospheric column ozone anomalies of the OMI swaths, we show that the stratosphere-troposphere exchange (STE) processes occur on the scale of a few hundred kilometers. Applying the high resolution (1o±1o±40-layer±0.5 hr) atmospheric chemistry transport model (CTM) as a transfer standard, we compare the noncoincident Aura level 2 swath datasets with the exact matching simulations of each measurement to investigate the consistency of different instruments as well as evaluate the accuracy of modeled ozone. Different signs of the CTM biases against HIRDLS, MLS, and TES are found from tropics to northern hemisphere (NH) mid-latitudes in July 2005 at 215 hPa and over tropics at 147 hPa for July 2005 and January 2006, suggesting inconsistency across these Aura datasets. On the other hand, the CTM has great positive biases against satellite observations in the lower stratosphere of winter time southern hemisphere (SH) mid-latitudes, which is probably attributed to the problems in the stratospheric circulation of the driving met-fields. The model's ability of reproducing STE-related processes, such as tropospheric folds (TFs), is confirmed by the comparisons with WOUDC sonde. We found eight cases in year 2005 with all the four Aura measurements available and folding structures in the coincident sonde profile. The case studies indicate that all the four Aura instruments demonstrate some skills in catching the

  16. Rauvolfianine, a new antimycobacterial glyceroglycolipid and other constituents from Rauvolfia caffra. Sond (Apocynaceae).

    Science.gov (United States)

    Ebeh Messanga, Robert; Dominique Serge, Ngono Bikobo; Abouem A Zintchem, Auguste; Norbert, Mbabi Nyemeck Ii; Esther Del Florence, Moni Ndedi; Patrick Hervé, Betote Diboué; Maximilienne Ascension, Nyegue; Alex De Théodore, Atchadé; Dieudonné Emmanuel, Pegnyemb; Christian G, Bochet; Koert, Ulrich

    2017-08-16

    The chemical investigation of the extract of the dried leaves of Rauvolfia caffra (Sond) (synonym Rauvolfia macrophylla) (Apocynaceae) led to isolation of a new glycoside derivative, rauvolfianine (1) as well as six known compounds: oleanolic acid (2), sitosterol-3-O-β-D-glucopyranoside (3), betulinic acid (4), vellosimine (5), sarpagine (6) and D-fructofuranosyl-β-(2→1)-α-D-glucopyranoside (7). Compounds 1, 2, 3, 4 and 7 were evaluated for antitubercular activity. Compounds 1 and 2 were the most active (MIC = 7.8125 and 31.25 μg/mL) towards the Isoniazid resistant strain of Mycobacterium tuberculosis AC45. Their structures and relative stereochemistry were elucidated by spectroscopic methods.

  17. Fabrication de transistors mono-electroniques en silicium pour le traitement classique et quantique de l'information: une approche nanodamascene

    Science.gov (United States)

    Harvey-Collard, Patrick

    Les transistors mono-electroniques (SETs) sont des dispositifs ayant un grand potentiel d'applications, comme la detection de charge ultra-sensible, la logique a basse consommation de puissance, la memoire ou la metrologie. De plus, la possibilite de pieger un seul electron et de manipuler son etat de spin pourrait permettre des applications en informatique quantique. Le silicium est un materiau interessant pour fabriquer l'ilot d'un SET. Son gap semi-conducteur permet le fonctionnement du dispositif dans le regime a un seul electron ou trou et pourrait permettre d'etendre la plage d'operation du SET en temperature en augmentant l'energie d'addition du diamant central de la valeur du gap. En outre, le silicium beneficie de plus de quarante annees d'expertise en microfabrication et d'une compatibilite avec la technologie metal--oxyde--semi-conducteur complementaire (CMOS). Cependant, la fabrication de ces dispositifs fait face a de serieuses limitations a cause de la taille nanometrique requise pour l'ilot. A ce jour, les procedes de fabrication proposes permettant l'operation a la temperature ambiante sont trop peu reproductibles pour permettre des applications a grande echelle. Dans ce memoire de maitrise, la fabrication de transistors mono-electroniques en silicium (Si-SETs) pour le traitement classique et quantique de l'information est realisee avec un procede nanodamascene. Le polissage chimico-mecanique (CMP) est introduit comme etape clef de la fabrication du transistor, permettant le controle au nanometre pres (nanodamascene) de l'epaisseur du transistor. Cet outil permet la fabrication de dispositifs ayant une geometrie auparavant impossible a realiser et ouvre la porte a l'innovation technologique. De plus, un procede de gravure du silicium par plasma a couplage inductif (ICP) est developpe pour permettre la fabrication de nanostructures de silicium sur une nanotopographie alliant le nano et le 3D. Les Si-SETs fabriques sont caracterises a basse

  18. A superheterodyne spectrometer for electronic paramagnetic. Resonance; Spectrometre superheterodyne de resonance paramagnetique electronique

    Energy Technology Data Exchange (ETDEWEB)

    Laffon, J L [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1963-12-15

    After a few generalities about electron paramagnetic resonance, a consideration of different experimental techniques authorises the choice of a particular type of apparatus. An EPR superheterodyne spectrometer built in the laboratory and having a novel circuit is described in detail. With this apparatus, many experimental results have been obtained and some of these are described as example. (author) [French] Apres quelques generalites sur le phenomene de resonance paramagnetique electronique, une synthese des differentes techniques experimentales, permet de fixer le choix d'un type d'appareillage. Un spectrometre de RPE superheterodyne realise en laboratoire et comportant un circuit original est expose dans le detail. Cet appareil a permis de nombreux resultats experimentaux dont quelques-uns sont decrits a titre d'exemple. (auteur)

  19. Remote sensing of surface currents in the Fraser River plume with the SeaSonde HF radar

    International Nuclear Information System (INIS)

    Hodgins, D.O.; Hardy, J.S.; Tinis, S.E.

    1994-09-01

    The SeaSonde 12.5-MHz radar system was deployed to measure surface currents in the Juan de Fuca Strait in July 1992. Reliable data were obtained from the two radars installed, and successful trials were conducted with the Infosat satellite link to transmit data from the remote site. Data recovery from the SeaSonde was generally good, with maximum ranges varying from 15 km to over 30 km. Sea echo return strength at both radars was correlated with wind, consistent with lower Bragg scattering at lower wind speeds. A simple surface current forecasting algorithm, based on decomposing the signal into tidal and residual bands, was examined. It was found that tides account for the greatest portion of currents in the study area, and could be forecasted out to 48 h with 1-2 d of input data. The nonpredictable, fluctuating part of the current signal was isolated and its statistics were calculated. The algorithm tests showed that the SeaSonde data can be used to measure and predict the slowly varying tidal and mean flow velocities, as well as the random part of the signal, both of which are important in oil spill modelling. Surface flow patterns and time-series data from the SeaSonde measurements, and from a three-dimensional hydrodynamic model, were compared from an oil spill modelling perspective. In general, surface flow patterns from the model were smoother than those observed. The differences were most noticeable in the cross-channel direction. The radar data indicate that a flow-dependent eddy viscosity formulation, with coefficients calibrated to reproduce the features observed with the radar, would improve agreement and yield a good model for data assimilation. 21 refs., 478 figs., 3 tabs

  20. In-Situ Detection of SO2 Plumes in Costa Rica from Turrialba Volcano using Balloon-borne Sondes

    Science.gov (United States)

    Diaz, J. A.; Selkirk, H. B.; Morris, G. A.; Krotkov, N. A.; Pieri, D. C.; Corrales, E.

    2012-12-01

    The Turrialba Volcano near San Jose, Costa Rica regularly emits plumes containing SO2. These plumes have been detected by the Ozone Monitoring Instrument (OMI), and evidence of these plumes has also appeared in the in-situ Ticosonde project record: a continuous balloon-borne ozonesonde launch experiment conducted in a weekly basis in Costa Rica. In the case of the latter, the interference reaction of SO2 in the cathode cell of the standard electrochemical concentration cell (ECC) ozonesonde results in apparent "notches" in the ozone profile at the altitudes of the plume. In this paper, we present an overview of the Ticosonde observations and correlate the appearance of the notches with air mass back trajectory calculations that link the profiles features to emissions from the volcano. In addition, during February 2012, we deployed the dual O3/SO2 sonde from the University of Costa Rica and detected a plume of SO2 linked by back trajectory calcluations to Turrialba as well as an urban plume resulting from diesel exhaust in the boundary layer. The integrated column SO2 from the sonde profile data agree well with the OMI overpass data for this event. Data from a tethersonde measurement two days prior to the dual sonde reveal concentrations at the ppm level at the volcanic source.

  1. Evaluation by electronic paramagnetic resonance of the number of free radicals produced in irradiated rat bone; Evaluation par resonance paramagnetique electronique du nombre de radicaux libres produits dans l'os de rat irradie

    Energy Technology Data Exchange (ETDEWEB)

    Marble, G; Valderas, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1966-07-01

    The number of long half-life free radicals created by gamma irradiation in the bones of the rat has been determined from the electrons paramagnetic resonance spectrum. This number decreases slowly with time (calculated half life: 24 days). It is proportional to the dose of gamma radiation given to the rat. The method could find interesting applications in the field of biological dosimetry. (authors) [French] Le nombre de radicaux libres a vie longue crees par irradiation gamma dans l'os de rat a ete determine a partir du spectre de resonance paramagnetique electronique. Ce nombre decroit lentement avec le temps (demi-vie calculee {approx_equal} 24 jours). IL est proportionnel a la dose de rayonnement gamma delivree au rat. La methode pourra trouver en dosimetrie biologique des applications interessantes. (auteurs)

  2. Evaluation by electronic paramagnetic resonance of the number of free radicals produced in irradiated rat bone; Evaluation par resonance paramagnetique electronique du nombre de radicaux libres produits dans l'os de rat irradie

    Energy Technology Data Exchange (ETDEWEB)

    Marble, G.; Valderas, R. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1966-07-01

    The number of long half-life free radicals created by gamma irradiation in the bones of the rat has been determined from the electrons paramagnetic resonance spectrum. This number decreases slowly with time (calculated half life: 24 days). It is proportional to the dose of gamma radiation given to the rat. The method could find interesting applications in the field of biological dosimetry. (authors) [French] Le nombre de radicaux libres a vie longue crees par irradiation gamma dans l'os de rat a ete determine a partir du spectre de resonance paramagnetique electronique. Ce nombre decroit lentement avec le temps (demi-vie calculee {approx_equal} 24 jours). IL est proportionnel a la dose de rayonnement gamma delivree au rat. La methode pourra trouver en dosimetrie biologique des applications interessantes. (auteurs)

  3. Electronic analogue simulator of radio cardiograms; Simulateur analogique electronique de radiocardiogrammes

    Energy Technology Data Exchange (ETDEWEB)

    Roux, G; Lansiart, A; Vernejoul, P de; Kellershohn, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    The various parameters of the heart pump and of the blood circulation can be determined by radio-cardio-graphical techniques. The curves thus obtained can be more easily used in radiocardiography if the electronic analogue simulator described here is employed. The experimental and simulated radio-cardiograms are made to coincide by varying the electrical parameters of the simulator. Using simple charts it is possible to obtain directly the actual original physiological parameters from these electrical parameters. Some examples are given showing the excellent accuracy obtained in the determination of ejection indices by the simulator. (authors) [French] Les differents parametres de la pompe cardiaque et de la circulation sanguine peuvent etre determines par les techniques de radiocardiographie. L'exploitation des courbes obtenues en radiocardiographie est rendue plus aisee par l'utilisation du simulateur analogique electronique presente ici. Le radiocardiogramme experimental et le radiocardiogramme simule sont superposes en agissant sur les parametre electriques du simulateur. Par l'utilisation d'abaques simples, ces parametres electriques permettent de retrouver directement les parametres reels d'origine physiologique. Quelques exemples sont donnes montrant l'excellente precision obtenue dans la determination des indices d'ejection a l'aide du simulateur. (auteurs)

  4. The use of probe characteristics in plasma in the presence of a magnetic field (1960); Utilisation des caracteristiques de sondes dans des plasmas en presence de champ magnetique (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Brunet, A; Geller, R; Leroy, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    In this article we recall the principal methods of interpretation of probe characteristics in plasma in the presence of magnetic fields. Our purpose is to resume and to present the methods in such a form as to be immediately applicable in a particular case. This article is therefore principally useful to experimenters. Finally we expose our practical view points by comparing of experimental methods. (author) [French] Dans cet article, nous rappelons les principales methodes d'interpretation des caracteristiques de sonde dans des plasmas en presence de champs magnetiques. Notre but est de resumer et de presenter sous forme inmediatement applicable ces methodes. Cet article est donc destine aux experimentateurs. Enfin, nous developpons nos etudes pratiques sur la question en etablissant des comparaisons experimentales entre les methodes. (auteur)

  5. Ozone sonde cell current measurements and implications for observations of near-zero ozone concentrations in the tropical upper troposphere

    Directory of Open Access Journals (Sweden)

    H. Vömel

    2010-04-01

    Full Text Available Laboratory measurements of the Electrochemical Concentration Cell (ECC ozone sonde cell current using ozone free air as well as defined amounts of ozone reveal that background current measurements during sonde preparation are neither constant as a function of time, nor constant as a function of ozone concentration. Using a background current, measured at a defined timed after exposure to high ozone may often overestimate the real background, leading to artificially low ozone concentrations in the upper tropical troposphere, and may frequently lead to operator dependent uncertainties. Based on these laboratory measurements an improved cell current to partial pressure conversion is proposed, which removes operator dependent variability in the background reading and possible artifacts in this measurement. Data from the Central Equatorial Pacific Experiment (CEPEX have been reprocessed using the improved background treatment based on these laboratory measurements. In the reprocessed data set near-zero ozone events no longer occur. At Samoa, Fiji, Tahiti, and San Cristóbal, nearly all near-zero ozone concentrations occur in soundings with larger background currents. To a large extent, these events are no longer observed in the reprocessed data set using the improved background treatment.

  6. French achievements in the field of nuclear electronics; Realisations francaises dans le domaine de l'electronique nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Doireau, M; Fabre, R; Guillon, H; Guyot, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Nuclear electronic equipment used by the french Atomic Energy Commission has been developed, with an increasing participation of the radioelectric industry (manufacture under AEC license, contracts for prototypes). The equipment for general use has been standardized and satis the technical specification sheets in which are specified more particularly, the conditions for construction, the choice of the spare parts and the conditions for acceptance by the french AEC at factory. The electronic equipment is classified in nine classes, and a brief description of the principal instruments is given in each class. The reliability of the equipment in use is satisfactory, as it is shown by the mean frequency of faults per 1000 hours operation. (author)Fren. [French] L'appareillage d'electronique nucleaire utilise au Commissariat a l'Energie atomique fran is a ete developpe en demandant un concours de plus en plus important a l'industrie radioelectrique (fabrications sous licence CEA, marches de prototypes, etc...). Le materiel d'emploi courant a ete standardise et repond aux specifications de cahiers des charges ou sont precises en particulier les conditions de realisation du materiel, le choix des pieces detachees et les conditions de recette en usine. L'appareillage electronique est classe en neuf rubriques et une description sommaire des principaux appareils est donnee dans chacune des rubriques. La tenue en service du materiel est satisfaisante, ainsi que le montre la frequence moyenne des pannes observees par 1000 heures de fonctionnement. (auteur)

  7. Geophysical borehole logging, dummy-sonding and optical imaging of the borehole OL-KR24 at Olkiluoto 2005

    International Nuclear Information System (INIS)

    Majapuro, J.

    2006-03-01

    Suomen Malmi Oy conducted geophysical borehole logging, dummy-sonding and optical imaging surveys of the borehole OL-KR24 at the Olkiluoto site in Eurajoki during 1.10.2005 - 4.10.2005. The survey is a part of Posiva Oy's detailed investigation program for the final disposal of spent nuclear fuel. The methods applied are caliper survey and optical imaging. The assignment included the field work of surveys, interpretation and processing of the data. The report describes the field operation, equipment as well as processing procedures and shows the obtained results and their quality in the appendices. The raw and processed data are delivered digitally in WellCAD and Excel format. (orig.)

  8. A new global real-time Lagrangian diagnostic system for stratosphere-troposphere exchange: evaluation during a balloon sonde campaign in eastern Canada

    Directory of Open Access Journals (Sweden)

    M. S. Bourqui

    2012-03-01

    Full Text Available A new global real-time Lagrangian diagnostic system for stratosphere-troposphere exchange (STE developed for Environment Canada (EC has been delivering daily archived data since July 2010. The STE calculations are performed following the Lagrangian approach proposed in Bourqui (2006 using medium-range, high-resolution operational global weather forecasts. Following every weather forecast, trajectories are started from a dense three-dimensional grid covering the globe, and are calculated forward in time for six days of the forecast. All trajectories crossing either the dynamical tropopause (±2 PVU or the 380 K isentrope and having a residence time greater than 12 h are archived, and also used to calculate several diagnostics. This system provides daily global STE forecasts that can be used to guide field campaigns, among other applications. The archived data set offers unique high-resolution information on transport across the tropopause for both extra-tropical hemispheres and the tropics. This will be useful for improving our understanding of STE globally, and as a reference for the evaluation of lower-resolution models. This new data set is evaluated here against measurements taken during a balloon sonde campaign with daily launches from three stations in eastern Canada (Montreal, Egbert, and Walsingham for the period 12 July to 4 August 2010. The campaign found an unexpectedly high number of observed stratospheric intrusions: 79% (38% of the profiles appear to show the presence of stratospheric air below than 500 hPa (700 hPa. An objective identification algorithm developed for this study is used to identify layers in the balloon-sonde profiles affected by stratospheric air and to evaluate the Lagrangian STE forecasts. We find that the predictive skill for the overall intrusion depth is very good for intrusions penetrating down to 300 and 500 hPa, while it becomes negligible for intrusions penetrating below 700 hPa. Nevertheless, the

  9. Analysis of electronic circuits using digital computers; L'analyse des circuits electroniques par les calculateurs numeriques

    Energy Technology Data Exchange (ETDEWEB)

    Tapu, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    Various programmes have been proposed for studying electronic circuits with the help of computers. It is shown here how it possible to use the programme ECAP, developed by I.B.M., for studying the behaviour of an operational amplifier from different point of view: direct current, alternating current and transient state analysis, optimisation of the gain in open loop, study of the reliability. (author) [French] Differents programmes ont ete proposes pour l'etude des circuits electroniques a l'aide des calculateurs. On montre comment on peut utiliser le programme ECAP, mis au point par I. B. M., pour etudier le comportement d'un amplificateur operationnel, a differents points de vue: analyse en courant continu, courant alternatif et regime transitoire, optimalisation du gain en boucle ouverte, etude de la fiabilite. (auteur)

  10. Quick electronics in the field of high energy physics; L'electronique rapide en physique de hautes energies

    Energy Technology Data Exchange (ETDEWEB)

    Meunier, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    An extensive technical development of particle counting in the field of high energy physics near any large modern accelerator is a necessary condition for efficient work with its beams of particles. In this review article, the basic principles of more commonly used circuite described with special emphasis on the explanation of the limits of their use. (author)Fren. [French] L'utilisation efficace des faisceaux de particules produits par les grands accelerateurs modernes a rendu necessaire un progres des techniques de comptage et de mesure electronique. Cet article decrit les principes de fonctionnement des differents circuits les plus communement utilises et explique plus particulierement les raisons de leurs limites d'utilisation. (auteur)

  11. Electronic commutating equipment for the automatic recording of pulses; Ensemble commutateur electronique pour enregistrement automatique d'impulsions

    Energy Technology Data Exchange (ETDEWEB)

    Garnaud, P [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1961-07-01

    This electronic selector allows to record six parted channels of pulses with only one automatic recorder type S.F.A.T. 57.3B. The numbers of pulses issuing from different counters or P.M. during a marc h time, are recorded on a tape of paper by one 'Elettrosumma 14 Olivetti' during the stop-time. (author) [French] Ce commutateur electronique permet d'enregistrer 6 voies separees d'impulsions avec un seul appareil d'enregistrement automatique type S.F.A.T. 57.3B. Les nombres d'impulsions provenant de differents compteurs ou P.M. pendant un temps de marche sont enregistres pendant l'arret des comptages sur une bande de papier par une machine imprimante 'Elettrosumma 14 Olivetti'. (auteur)

  12. Observations on the electronic equipment employed for making measurements on the pile G1; Observations sur le materiel electronique utilise pour les mesures sur la pile G1

    Energy Technology Data Exchange (ETDEWEB)

    Ailloud, J; Belin, P; Meunier, A; Tarabella, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    The electronic apparatus employed during the manipulations carried out on the pile G1 is briefly described, with the aim of putting on record the inconveniences encountered in the course of the operation of this equipment. (author) [French] On decrit succinctement l'appareillage electronique utilise durant les manipulations effectuees sur la pile G1, dans le but de noter les inconvenients rencontres au cours de l'exploitation de cet appareillage. (auteur)

  13. Surface current measurements in Juan de Fuca Strait using the SeaSonde HF [high frequency] radar

    International Nuclear Information System (INIS)

    Hodgins, D.O.

    1994-09-01

    The shore-based SeaSonde high-frequency (HF) radar was deployed for three weeks in summer 1993 to measure surface currents in the Strait of Georgia, British Columbia. Experimental objectives included documenting the complex flow regime generated by large tides and the brackish plume of the Fraser River, and determining the radar performance under low-wind, low-salinity conditions. The radar data showed that surface flows are dominated by the plume jet formed by the Fraser River outflow, giving rise to recurring, energetic eddies with scales of 8-12 km, strong flow meanders, and convergent fronts. These features were continuously modulated by the along-channel tidal flows. Comparisons with a detailed numerical model hindcast gave good correlation between observed and predicted flow fields, especially at tidal and low frequencies. Radar return was found to be correlated with local winds and radar performance was independent of salinity variations in the plume. Synthetic aperture radar (SAR) provides a map of the radar scattering characteristics of the ocean surface on a capillary wave scale. ERS-1 satellite and airborne SAR images for July 28, 1993 were obtained and surface features were examined in the context of the HF radar current fields. Results show that SAR images alone cannot reliably provide the dynamical data required in this region by oil spill models. Under certain conditions, however, the radar imagery offers valuable physical information on phenomena affecting oil slick development. Interpretation of SAR imagery in conjunction with other remote sensing information would offer more quantitative prediction data. 28 refs., 334 figs., 1 tab

  14. The Eyjafjallajökull eruption in April 2010 – detection of volcanic plume using in-situ measurements, ozone sondes and lidar-ceilometer profiles

    Directory of Open Access Journals (Sweden)

    H. Flentje

    2010-10-01

    Full Text Available Volcanic emissions from the Eyjafjallajökull volcano eruption on the Southern fringe of Iceland in April 2010 were detected at the Global Atmosphere Watch (GAW station Zugspitze/Hohenpeissenberg (Germany by means of in-situ measurements, ozone sondes and ceilometers. Information from the German Meteorological Service (DWD ceilometer network (Flentje et al., 2010 aided identifying the air mass origin. We discuss ground level in-situ measurements of sulphur dioxide (SO2, sulphuric acid (H2SO4 and particulate matter as well as ozone sonde profiles and column measurements of SO2 by a Brewer spectrometer. At Hohenpeissenberg, a number of reactive gases, e.g. carbon monoxide and nitrogen oxides, and particle properties, e.g. size distribution and ionic composition, were additionally measured during this period. Our results describe the arrival of the volcanic plume at Zugspitze and Hohenpeissenberg during 16 and 17 April 2010 and its residence in the planetary boundary layer (PBL for several days thereafter. The ash plume was first seen in the ceilometer backscatter profiles at Hohenpeissenberg in about 6–7 km altitude. After entrainment into the PBL at noon of 17 April, largely enhanced values of sulphur dioxide, sulphuric acid and super-micron-particle number concentration were recorded at Zugspitze/Hohenpeissenberg till 21 April.

  15. Electronic diffraction study of the chlorination of nickel; Etude par diffraction electronique de la chloruration du nickel

    Energy Technology Data Exchange (ETDEWEB)

    Vigner, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    A study has been made of the chlorination of the (100), (110) and (111) crystal faces of nickel using high energy electron diffraction and electron microscopy. Two methods have been used: bombardment with chlorine ions having an energy of between 10 and 30 keV, and direct chlorination in a diffractor at pressures of about 10{sup -4} torr. It has thus been possible to show the very special properties of nickel chloride (CdBr{sub 2} type, space group R 3-bar m) which is always formed along the (0001) plane, whatever the orientation of the substrate. It has also been possible to attain the metal-halide interface and to show the existence of two-dimensional chemisorbed films which are ordered or disordered according to the crystal orientation. (author) [French] La chloruration des faces (100) (110) et (111) du nickel a ete etudiee par diffraction des electrons de haute energie et par microscopie electronique. Deux methodes ont ete utilisees: le bombardement avec des ions chlore ayant une energie comprise entre 10 et 30 keV, et la chloruration directe dans un diffracteur pour des pressions de l'ordre de 10{sup -4} torr. Ainsi ont ete mises en evidence les proprietes tres particulieres du chlorure de nickel (type CdBr{sub 2}, groupe spatial R 3-bar m) qui s'accole toujours suivant le plan (0001), quelle que soit l'orientation du substrat. Il a ete egalement possible d'atteindre l'interface metal-halogenure et de montrer l'existence de couches chimisorbees bidimensionnelles, ordonnees ou desordonnees suivant l'orientation cristalline etudiee. (auteur)

  16. Study of the machining of uranium carbide rods obtained by continuous casting under electronic bombardment; Etude de l'usinage de barreaux de carbure d'uranium obtenus par coulee continue sous bombardement electronique

    Energy Technology Data Exchange (ETDEWEB)

    Rousset, P; Accary, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The authors consider the various methods of machining uranium mono-carbide and compare them critically in the case of their application to uranium carbide obtained by fusion under an electronic bombardment and continuous casting. This study leads them to propose two mechanical machining methods: cylindrical rectification and center-less rectification, preceded by a preliminary roughing out of a cylinder, the latter appearing more suitable. A study of the machining yields as a function of the diameter of the rough bars and of the diameter of the finished rods has shown that an optimum value of the rough bar diameter exists for each value of the finished rod diameter. It is found that the yield increases as the diameter itself increases, this yield rising from 45 per cent to around 70 per cent as the diameter of the rough bars increases from 25-26 mm to 37-38 mm. (authors) [French] Les auteurs envisagent les differentes methodes d'usinage du monocarbure d'uranium et se livrent a une etude critique de celles-ci, dans le cas de leur application a l'usinage de barreaux de carbure d'uranium obtenus par fusion sous bombardement electronique et coulee continue. Cette etude les conduit a proposer deux methodes d'usinage mecanique: la rectification cylindrique et la rectification 'centerless', precedee d'un ebauchage par carottage, la seconde paraissant la plus appropriee. L'etude des rendements d'usinage en fonction du diametre des barreaux bruts et du diametre des barreaux finis, a mis en evidence une valeur optimale du diametre des barreaux bruts pour chaque valeur du diametre des barreaux usines. Elle a montre que le rendement croit lorsque le diametre croit lui-meme, ce rendement passant d'environ 45 pour cent a environ 70 pour cent, lorsque le diametre des barreaux bruts passe de 25-26 mm a 37-38 mm.

  17. Etude de la formation de resonances electroniques et de leur role dans la fragmentation neutre de molecules d'interet biologique

    Science.gov (United States)

    Lepage, Martin

    1998-12-01

    Cette these est presentee a la Faculte de medecine de l'Universite de Sherbrooke en vue de l'obtention du grade de Ph.D. en Radiobiologie. Elle contient des resultats experimentaux enregistres avec un spectrometre d'electrons a haute resolution. Ces resultats portent sur la formation de resonances electroniques en phase condensee et de differents canaux pour leur decroissance. En premier lieu, nous presentons des mesures d'excitations vibrationnelles de l'oxygene dilue en matrice d'argon pour des energies des electrons incidents de 1 a 20 eV. Les resultats suggerent que le temps de vie des resonances de l'oxygene est modifie par la densite d'etats d'electrons dans la bande de conduction de l'argon. Nous presentons aussi des spectres de pertes d'energie d'electrons des molecules de tetrahydrofuranne (THF) et d'acetone. Dans les deux cas, la position en energie des pertes associees aux excitations vibrationnelles est en excellent accord avec les resultats trouves dans la litterature. Les fonctions d'excitation de ces modes revelent la presence de plusieurs nouvelles resonances electroniques. Nous comparons les resonances du THF et celles de la molecule de cyclopentane en phase gazeuse. Nous proposons une origine commune aux resonances ce qui implique qu'elles ne sont pas necessairement attribuees a l'excitation des electrons non-apparies de l'oxygene du THF. Nous proposons une nouvelle methode basee sur la spectroscopie par pertes d'energie des electrons pour detecter la production de fragments neutres qui demeurent a l'interieur d'un film mince condense a basse temperature. Cette methode se base sur la detection des excitations electroniques du produit neutre. Nous presentons des resultats de la production de CO dans un film de methanol. Le taux de production de CO en fonction de l'energie incidente des electrons est calibre en termes d'une section efficace totale de diffusion des electrons. Les resultats indiquent une augmentation lineaire du taux de production de

  18. International symposium on Electron-magnetic fields in mechatronics, electrical and electronique engineering

    CERN Document Server

    Krawczyk, Andrzej; Dolezel, Ivo

    2008-01-01

    Includes contributions on electromagnetic fields in electrical engineering which intends at joining theory and practice. This book helps the world-wide electromagnetic community, both academic and engineering, in understanding electromagnetism itself and its application to technical problems.

  19. Conception et exploitation d'une sonde électronique d'auscultation des réseaux d'assainissement urbains non visitables

    OpenAIRE

    Bedrani , Mourad

    1983-01-01

    Partant de l'hypothèse que, d'une part, aucun rejet ne peut se trouver à une température rigoureusement identique à celle des eaux drainées dans le réseau, et que, d'autre part, la température de la nappe phréatique est systématiquement plus basse que celle de différents rejets domestiques ou industriels, nous avons conçu une sonde autonome à double paramètre : température et conductivité, baptisée Ichtyotherme, pour l'auscultation des réseaux. L'appareil développé est couplé à un microordina...

  20. Electron microscope observation of single - crystalline beryllium thin foils; Observation de lames minces monocristallines de beryllium en microscopie electronique

    Energy Technology Data Exchange (ETDEWEB)

    Antolin, J; Poirier, J P; Dupouy, J M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    Thin foils prepared from single crystalline beryllium simples deformed at room temperature, have been observed by transmission electron microscopy. The various deformation modes have been investigated separately, from their early stages and their characteristic dislocation configurations have been observed. Basal slip is characterized at is outset by the presence of numerous dipoles and elongated prismatic loops. More pronounced cold work leads to the formation of dislocation tangles and bundles which eventually give a cellular structure. Prismatic slip begins by the cross-slip of dislocations from the basal plane into the prismatic plane. A cellular structure is equally observed in heavily deformed samples. Sessile dislocations have been observed in twin boundaries; they are produced by reactions between slip dislocations and twin dislocations. Finally, the study of samples quenched from 1100 deg. C and annealed at 200 deg. C has shown that the observed loops lie in prismatic planes and have a Burgers vector b 1/3<1 1 2-bar 0>. (authors) [French] On a observe en microscopie electronique par transmission des lames minces tirees d'eprouvettes monocristallines de beryllium deformees a l'ambiante. On a etudie separement les differents modes de deformation a partir de leur stade elementaire en observant les configurations de dislocations caracteristiques. Le glissement basal est caracterise a son debut par la presence de nombreux dipoles et de boucles prismatiques allongees. Des ecrouissages plus forts conduisent a la formation d'echeveaux et de gerbes qui finissent par donner une structure cellulaire. Le glissement prismatique debute par le glissement des dislocations hors du plan de base dans les plans prismatiques. On trouve egalement une structure cellulaire pour de forts ecrouissages. Dans les joints de macle, on a observe des dislocations sessiles formees par la reaction entre dislocations de macle et dislocations de glissement. Enfin l'etude d

  1. Electron microscope study of vacancy clusters produced by quenching in magnesium; Etude par microscopie electronique des amas de lacunes crees par trempe dans le magnesium

    Energy Technology Data Exchange (ETDEWEB)

    Levy, V; Espinasse, J; Mairy, C; Hillairet, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    Vacancy clustering in quenched magnesium has been studied by transmission electron microscopy. The nature of the vacancy loops observed, seems to depend essentially on the impurity content of the metal; this effect can be attributed to a variation of the stacking fault energy of magnesium due to impurities. (authors) [French] On a etudie par microscopie electronique en transmission les defauts crees par trempe dans le magnesium. Un effet considerable des impuretes du metal sur la nature des boucles obtenues par condensation de lacunes a ete mis en evidence; cet effet semble s'expliquer de facon satisfaisante par un abaissement de l'energie de faute d'empilement du magnesium du aux impuretes. (auteur)

  2. Mechanics and electronics as auxiliary techniques in nuclear research and exploitation; Mecanique et electronique auxiliaires de la recherche et de l'exploitation nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Weill, J. [Commissariat a l' energie atomique et aux energies alternatives - CEA, Centre d' Etudes nucleaires de Saclay, Departement Electronique, Groupe Controle des Reacteurs (France)

    1959-07-01

    Electronics and mechanics form the basic techniques used in the field of measurement and control in nuclear physics experiments, and in nuclear machine installations. The delegate describes some instruments typical of the use of these techniques in the fields of calculation, detection, amplification and nuclear Installations. Reprint of a paper published in 'Bulletin S.F.M.' n. 25 (3. quarter 1957) [French] L'electronique et la mecanique constituent les techniques de base utilisees clans le domaine des mesures et du controle effectues dans les experiences de physique nucleaire et dans les installations des engins nucleaires. Le Conferencier decrit plusieurs appareils caracteristiques de l'emploi de ces techniques dans les domaines du calcul, des detecteurs, de l'amplification et des lnstallations nucleaires. Reproduction d'un article publie dans le 'Bulletin S.F.M.' n. 25 (3e trimestre 1957)

  3. Experimental transmission electron microscopy studies and phenomenological model of bismuth-based superconducting compounds; Etudes experimentales par microscopie electronique en transmission et modele phenomenologique des composes supraconducteurs a base de bismuth

    Energy Technology Data Exchange (ETDEWEB)

    Elboussiri, Khalid

    1991-09-26

    The main part of this thesis is devoted to an experimental study by transmission electron microscopy of the different phases of the superconducting bismuth cuprates Bi{sub 2}Sr{sub 2}Ca{sub n-1}Cu{sub n}O{sub 2n+4}. In high resolution electron microscopy, the two types of incommensurate modulation realized in these compounds have been observed. A model of structure has been proposed from which the simulated images obtained are consistent with observations. The medium resolution images correlated with the electron diffraction data have revealed existence of a multi-soliton regime with latent lock in phases of commensurate periods between 4b and 10b. At last, a description of different phases of these compounds as a result of superstructures from a disordered perovskite type structure is proposed (author) [French] Le travail presente dans cette these consiste en une etude experimentale essentiellement par microscopie electronique en transmission des differentes phases supraconductrices presentes dans les composes appartenant a la famille des cuprates de bismuth Bi{sub 2}Sr{sub 2}Ca{sub n-1}Cu{sub n}O{sub 2n+4}. Les obsevations de microscopie electronique a haute resolution ont permis de mettre en evidence les differentes modulations incommensurables realisees dans ces composes. Un modele de structure est propose et a permis d'obtenir des images simulees compatibles avec les observations. D'autre part, les observations de microscopie electronique en moyenne resolution sur ces composes, combinees avec les resultats de diffraction electronique, ont montre l'existence d'un regime multisoliton associe a des phases de Lock-in latentes de parametres compris entre 4b et 10b. Enfin, une description des differentes phases de ces composes en terme de surstructures derivees de structure perovskite desordonnee est exposee. (auteur)

  4. Study of the machining of uranium carbide rods obtained by continuous casting under electronic bombardment; Etude de l'usinage de barreaux de carbure d'uranium obtenus par coulee continue sous bombardement electronique

    Energy Technology Data Exchange (ETDEWEB)

    Rousset, P.; Accary, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The authors consider the various methods of machining uranium mono-carbide and compare them critically in the case of their application to uranium carbide obtained by fusion under an electronic bombardment and continuous casting. This study leads them to propose two mechanical machining methods: cylindrical rectification and center-less rectification, preceded by a preliminary roughing out of a cylinder, the latter appearing more suitable. A study of the machining yields as a function of the diameter of the rough bars and of the diameter of the finished rods has shown that an optimum value of the rough bar diameter exists for each value of the finished rod diameter. It is found that the yield increases as the diameter itself increases, this yield rising from 45 per cent to around 70 per cent as the diameter of the rough bars increases from 25-26 mm to 37-38 mm. (authors) [French] Les auteurs envisagent les differentes methodes d'usinage du monocarbure d'uranium et se livrent a une etude critique de celles-ci, dans le cas de leur application a l'usinage de barreaux de carbure d'uranium obtenus par fusion sous bombardement electronique et coulee continue. Cette etude les conduit a proposer deux methodes d'usinage mecanique: la rectification cylindrique et la rectification 'centerless', precedee d'un ebauchage par carottage, la seconde paraissant la plus appropriee. L'etude des rendements d'usinage en fonction du diametre des barreaux bruts et du diametre des barreaux finis, a mis en evidence une valeur optimale du diametre des barreaux bruts pour chaque valeur du diametre des barreaux usines. Elle a montre que le rendement croit lorsque le diametre croit lui-meme, ce rendement passant d'environ 45 pour cent a environ 70 pour cent, lorsque le diametre des barreaux bruts passe de 25-26 mm a 37-38 mm.

  5. Detectors - Electronics; Detecteurs - Electronique

    Energy Technology Data Exchange (ETDEWEB)

    Bregeault, J.; Gabriel, J.L.; Hierle, G.; Lebotlan, P.; Leconte, A.; Lelandais, J.; Mosrin, P.; Munsch, P.; Saur, H.; Tillier, J. [Lab. de Physique Corpusculaire, Caen Univ., 14 (France)

    1998-04-01

    The reports presents the main results obtained in the fields of radiation detectors and associated electronics. In the domain of X-ray gas detectors for the keV range efforts were undertaken to rise the detector efficiency. Multiple gap parallel plate chambers of different types as well as different types of X {yields} e{sup -} converters were tested to improve the efficiency (values of 2.4% at 60 KeV were reached). In the field of scintillators a study of new crystals has been carried out (among which Lutetium orthosilicate). CdTe diode strips for obtaining X-ray imaging were studied. The complete study of a linear array of 8 CdTe pixels has been performed and certified. The results are encouraging and point to this method as a satisfying solution. Also, a large dimension programmable chamber was used to study the influence of temperature on the inorganic scintillators in an interval from -40 deg. C to +150 deg. C. Temperature effects on other detectors and electronic circuits were also investigated. In the report mentioned is also the work carried out for the realization of the DEMON neutron multidetector. For neutron halo experiments different large area Si detectors associated with solid and gas position detectors were realized. In the frame of a contract with COGEMA a systematic study of Li doped glasses was undertaken aiming at replacing with a neutron probe the {sup 3}He counters presently utilized in pollution monitoring. An industrial prototype has been realised. Other studies were related to integrated analog chains, materials for Cherenkov detectors, scintillation probes for experiments on fundamental processes, gas position sensitive detectors, etc. In the field of associated electronics there are mentioned the works related to the multidetector INDRA, data acquisition, software gamma spectrometry, automatic gas pressure regulation in detectors, etc

  6. Parcours d’un roman postcolonial francophone en France et en Allemagne : Le Cœur des enfants léopards, de Wilfried N’Sondé

    Directory of Open Access Journals (Sweden)

    Myriam Louviot

    2010-12-01

    Full Text Available En 2007, Wilfried N’Sondé, Franco-congolais vivant à Berlin, publie en France son premier roman, Le Cœur des enfants léopards. Le livre rencontre un certain succès. Un an plus tard, la traduction allemande, Das Herz der Leopardenkinder semble faire une carrière comparable en Allemagne. On serait donc tenté de conclure qu’il n’y a pas tant de différence entre le lectorat français et le lectorat allemand. Un bon roman est un bon roman et il semble normal qu’il trouve son public des deux côtés du Rhin... Mais à y regarder de plus près, il apparaît que la réception du roman de Wilfried N’Sondé en France et en Allemagne suit des voies bien différentes. En France, les littératures postcoloniales sont essentiellement considérées à l’intérieur du cadre conceptuel de la francophonie et le roman de N’Sondé apparaît effectivement d’abord comme un roman francophone ; en Allemagne, il est plutôt rattaché à la littérature de la migration et est compris en fonction des traditions d’analyse qui s’y rattachent.2007 veröffentlicht der in Berlin lebende und aus Kongo stammende Franzose Wilfried N’Sondé, seinen ersten Roman, Le cœur des enfants léopards. Das Buch erfreut sich in Frankreich einer regen Aufmerksamkeit. Ein Jahr später scheint die deutsche Übersetzung, Das Herz der Leopardenkinder, am französischen Erfolg anzuknüpfen : ein guter Roman bleibt ein guter Roman und so scheint es nur normal dass, er auf beiden Seiten des Rheins sein Publikum findet. Dennoch wäre es falsch, daraus auf eine sehr ähnliche Leserschaft in den beiden Sprachräumen zu schließen. Bei genauerem Hinsehen zeigt sich, dass die Rezeption von Wilfried N’Sondés Roman in Frankreich und in Deutschland sehr unterschiedlich verläuft. Während der Roman in Frankreich im Kontext der postkolonialen Literatur in erster Linie als frankophones Werk rezipiert wird, konzentriert sich die deutsche Rezeption vornehmlich auf den

  7. Measurement of the electronic density of ionised media by hyper frequency methods; Mesure de la densite electronique des milieux ionises par des methodes hyperfrequences

    Energy Technology Data Exchange (ETDEWEB)

    Consoli, T [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Within the limits of the I.N.S.T.N. courses on plasmas, this analytical study summarizes the articles quoted in the references on hyper-frequency techniques for the measurement of electronic density of an ionised gas. It is neither exhaustive nor complete and further details may be obtained by referring to the works mentioned. The first part, devoted to the theoretical side, concert the propagation of electromagnetic waves ionised media and the excitation of stationary raves in electromagnetic cavities. The second part deals with the measurement techniques themselves. It includes those techniques which hare become classic, and also more recent ones being developed in various laboratories and in the Service of Applied Physics at Saclay. (author) [French] Dans le cadre des cours sur les plasmas a l'l.N.S.T. cette etude d'analyse resume les articles cites en bibliographie sur les techniques hyperfrequences pour la mesure de la densite electronique d'un gas ionise. Elle n'est ni exhaustive, ni complete. Pour plus de details on voudra bien se rapporter aux travaux mentionnes. La premiere partie consacree a des rappels theoriques, concerne la propagation des ondes electromagnetiques dans les milieux ionises et sur l'excitation d'ondes stationnaires dans les cavites electromagnetiques. La seconde se rapporte aux techniques de mesures proprement dites. On a fait figurer dans cette partie des techniques devenues classiques et celles plus recentes en cours d'etudes dans divers laboratoires et au Service de Physique Appliquee a SACLAY. (auteur)

  8. Design and construction of a faraday cup for measuring small electron currents; Etudes et realisation d'une ''coupe de faraday'' pour les mesures de faibles courants electroniques

    Energy Technology Data Exchange (ETDEWEB)

    Veyssiere, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    This paper describes the design of a device for measuring and integrating very small currents generated by the impact of a charged particle beam upon a Faraday cup. Part one considers the detector as such. The main component is a graphite bloc capable of stopping practically all the incident charges. Part two describes the associated electrode apparatus required to measure better than 10{sup -13} ampere with a precision- of 1 per cent: Integration of such weak currents over periods of several hours, in the presence of a strong background current, is also discussed. (author) [French] Ce rapport decrit l'etude et la realisation d'un ensemble permettant de mesurer et d'integrer sur des periodes de plusieurs heures des courants electroniques tres faibles provenant d'un faisceau de particules chargees, Dans la premiere partie du rapport nous etudierons le capteur proprement dit qui se compose essentiellement d'un bloc de graphite dont la forme et les dimensions sont telles, que la majeure partie des charges (positons et negatons de 60 MeV) est captee (1 pour mille reussissent a s'echapper). Dans la deuxieme partie nous decrivons l'appareillage associe au capteur capable de mesurer moins de 10{sup -13} ampere avec une precision de l'ordre du pour cent et d'integrer ce courant sur des periodes de temps variables, compte tenu de l'ambiance 'bruyante' (Accelerateur Lineaire) dans laquelle la mesure s'effectue. (auteur)

  9. Example of dealing with the accident during therapeutical application of Co-60 at one institute of oncology and radiology in Serbia

    International Nuclear Information System (INIS)

    Ilic, Z.; Perisic, J.; Vukcevic, M.; Joksic, G.; Spasojevic-Tisma, V.; Cuknic, O.; Milanovic, S.; Djuric, J.; Konstantinovic, J.; Ilic, Z.)

    2007-01-01

    This article describes an example of dealing with the accident during therapeutical application of Co-60 to a gynaecological patient. The accident happened when the sonde with Ca-60 drop out from the original postament, and was held by nurse and with bare hands storaged into his own special container [sr

  10. Study of the nature and of the properties of paramagnetic centers observed by electron spin resonance in conjugated polymers; Etude de la nature des propriete des centres paramagnetiques observes par resonance paramagnetique electronique dans les polymeres conjugues

    Energy Technology Data Exchange (ETDEWEB)

    Nechtschein, M [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1967-06-15

    Conjugated polymers contain paramagnetic centers. It is established that these centers are free radicals and a model which defines their electronic structure is proposed. The interactions between these centers are studied, notably by dynamic polarisation experiments. Finally it is shown that the centers have catalytic properties. (author) [French] Les polymeres conjugues contiennent des centres paramagnetiques. L'origine radicalaire de ces centres est etablie et un modele precisant leur structure electronique est propose. Les interactions entre ces centres sont etudiees, notamment a l'aide d'experiences de polarisation dynamique. Des proprietes catalytiques sont mises en evidence. (auteur)

  11. Study of the nature and of the properties of paramagnetic centers observed by electron spin resonance in conjugated polymers; Etude de la nature des propriete des centres paramagnetiques observes par resonance paramagnetique electronique dans les polymeres conjugues

    Energy Technology Data Exchange (ETDEWEB)

    Nechtschein, M. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1967-06-15

    Conjugated polymers contain paramagnetic centers. It is established that these centers are free radicals and a model which defines their electronic structure is proposed. The interactions between these centers are studied, notably by dynamic polarisation experiments. Finally it is shown that the centers have catalytic properties. (author) [French] Les polymeres conjugues contiennent des centres paramagnetiques. L'origine radicalaire de ces centres est etablie et un modele precisant leur structure electronique est propose. Les interactions entre ces centres sont etudiees, notamment a l'aide d'experiences de polarisation dynamique. Des proprietes catalytiques sont mises en evidence. (auteur)

  12. Utilisation d'une sonde fluorimétrique benthique (la BenthoTorch, bbe) pour mesurer la croissance des diatomées, algues vertes et cyanobactéries périphytiques en plans d'eau

    OpenAIRE

    Roubeix, V.

    2015-01-01

    / Une sonde fluorimétrique benthique, la BenthoTorch (bbe) a été acquise par le pôle Onema-Irstea d'Hydroécologie des Plans d'eau pour développer un indice fonctionnel de production primaire dans les plans d'eau. Cet indice sera basé sur la dynamique de croissance du périphyton sur des substrats artificiels. Il constituerait un outil de diagnostic du fonctionnement écologique des systèmes lentiques, particulièrement utile dans le cadre du suivi de mesures de restauration. La BenthoTorch me...

  13. E. P. R. spectroscopic study of nitroxide mono- and bi-radicals; Etude par spectroscopie de resonance paramagnetique electronique de monoradicaux et de biradicaux nitroxydes

    Energy Technology Data Exchange (ETDEWEB)

    Lemaire, H [Commissariat a l' Energie Atomique, Grenoble, 38 (France). Centre d' Etudes Nucleaires

    1967-07-01

    parfaitement bien definis au point de vue structure chimique. L'etude par resonance paramagnetique electronique de monoradicaux nitroxydes conduit a la determination des axes et des elements du tenseur d'interaction hyperfine electron-noyau d'azote et du tenseur d'anisotropie du facteur de Lande: les resultats sont relies a la structure electronique des radicaux. On interprete qualitativement l'influence du solvant sur les elements des tenseurs, ainsi que les elargissements selectifs des raies hyperfines en milieu visqueux. Dans les biradicaux nitroxydes, la structure hyperfine depend non seulement des interactions magnetiques propres a chaque monomere, mais egalement de la grandeur de l'interaction d'echange separant les etats singulet et triplet du dimere; les biradicaux etudies ici sont les premiers composes organiques pour lesquels l'influence de l'echange sur la structure hyperfine est clairement mise en evidence. La presence de deux electrons non apparies introduit egalement une interaction magnetique dipolaire electron-electron, que l'on peut mettre a profit, dans le cas d'un echange intermediaire, pour determiner le signe de l'echange en etudiant le biradical dans un cristal liquide. Ces composes presentent egalement des elargissements selectifs de transitions hyperfines lorsque la viscosite du solvant croit. La theorie utilisee pour interpreter les largeurs de raie des monoradicaux est etendue au cas des biradicaux; elle rend compte des resultats experimentaux si l'on introduit simultanement les anisotropies des facteurs de Lande et des interactions dipolaires electrons-noyaux et electron-electron, en conduisant a une autre determination du signe de l'echange. (auteur)

  14. Electronic Modification of the Scintigram and its Limitations; Modification Electronique des Scintigrammes: Limitations; Ehlektronnoe usovershenstvovanie stsintigrammy i ego ogranicheniya; Modificacion Electronica de los Centelleogramas: Sus Limitaciones

    Energy Technology Data Exchange (ETDEWEB)

    Conrad, B.; Horst, W. [University Clinic for Radiotherapy and Nuclear Medicine Cantonal Hospital, Zurich (Switzerland)

    1964-10-15

    An investigation of the basic principles of contrast enhancement is presented. Certain fundamental laws should be observed in the design of transforming systems as well as in their application in order to visualize a maximum of information. These laws are developed using the following parameters and functions, which in general characterize all kinds of transforming systems: (1) The elementary cell of primary information, defined by time intervals or pre-selected number of counts etc; (2) The information-transforming function, according to which the elementary cell is represented in the scintigram (by the degree of blackening of a photo-dot, for example). Often this function is regarded as the final characteristic of the transforming system; this is true, however, only when statistical fluctuations are negligible. The behaviour of a transforming system including statistical fluctuations is described by the following functions, which show the quality of a scintigram in quantitative terms. (3) The picture-generating function, according to which the mean value of counting rate over an area is transformed into a mean blackening of the corresponding area in the scintigram. This function gives the contrast enhancement. (4) The significance function, which describes the loss of information caused by the transformation. This function gives the degree of regularity of representation. On the basis of the above definitions, the paper deals with the following problems: optimal ''size'' of the primary information cell, depending on the resolution of the detector; optimal shape of transforming function for various purposes; some electronic circuits for realization of such functions. In particular, an apparatus is described in detail which gives an optimum of linear presentation using a suitable selected non- linear transforming function. Thus the range of net counting rate between background and maximal counting rate is projected to the full range of blackening in the scintigram

  15. Electronique appliquée, électromécanique sous Simscape & SimPowerSystems (Matlab/Simulink)

    CERN Document Server

    Mokhtari, Mohand

    2012-01-01

    Cet ouvrage permet d'apprendre à utiliser les Outils Simscape et SimpowerSystems pour modéliser et simuler des circuits électroniques, électromécaniques et électronique de puissance. Pour utiliser ces deux outils, la connaissance de MATLAB et SIMULINK est indispensable. Cet ouvrage possède trois types de chapitres: prise en main de l'outil, description des différentes bibliothèques avec quelques applications et enfin chapitre d'applications très utilisées dans les domaines universitaires et industriels.

  16. Study of the point defects formed in cobalt by electron bombardment; Etude des defauts ponctuels crees par bombardement electronique dans le cobalt

    Energy Technology Data Exchange (ETDEWEB)

    Sulpice, G [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

    1968-12-01

    A study of the point defects formed in cobalt by electron bombardment is presented. The results are compared with those previously obtained for two other ferromagnetic metals of different structure, iron and nickel. In the first part we give a review of the literature concerning the creation of point defects, their contribution to resistivity and their annihilation mode in the three structure types. We then describe the experimental techniques adapted, in particular the study of the resistivity increase during a linear temperature rise. Our investigations concern the following, essential points : the observation of the successive annihilation stages of the point defects formed in pure cobalt, a study of the variations with respect to the doses and energy of the incident particles, and the determination of the annealing kinetics and the corresponding activation energies. The results are finally compared with the various models of point defect annihilation proposed for other metals: none of these interpretations is in perfect agreement with our results. In the case of cobalt we are thus led to modify the model proposed by our laboratory for iron an nickel. The difference between these three metals is explained by the anisotropic character of the cobalt matrix. (author) [French] Nous presentons une etude des defauts ponctuels crees par bombardement electronique dans le cobalt et comparons nos resultats a ceux obtenus precedemment dans deux autres metaux ferromagnetiques de structure differente, le fer et le nickel. Dans une premiere partie nous faisons une mise au point bibliographique comparee sur la creation des defauts, leur contribution a la resistivite et leur mode d'annihilation dans les trois types de structure. Nous decrivons ensuite les techniques experimentales mises au point, en particulier l'etude du revenu de la resistivite au cours d'une montee lineaire de temperature. Au cours de ce travail, nous avons mis en evidence les stades successifs d

  17. Contribution to the study of point defects formed in nickel by electron bombardment; Contribution a l'etude des defauts ponctuels crees par bombardement electronique dans le nickel

    Energy Technology Data Exchange (ETDEWEB)

    Oddou, J L [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

    1968-12-01

    After a short account of the experimental techniques employed in our studies, the experimental results obtained on pure nickel samples are exposed. The apparition of the successive annihilation stages of point defects created by electron bombardment is established by isochronal heat treatments: the annihilation kinetics and the corresponding activation energies are determined. The effect of the incident particle doses is also studied. The experimental results are then compared with R.A. Johnson's theoretical calculations of the stability and the migration of point defects in nickel, and taking into account the results obtained by Peretto in magnetic after effect measurements. This leads us to a model in good agreement with calculations and experiment for the first stages. In a second chapter the behaviour of nickel doped by certain impurities is studied. First, the results concerning the rate of increase of resistivity (function of sample purity) is investigated. Two possible explanations of the observed phenomenon are proposed: either a deviation with respect to Mathiessen's law, or an increase of the number of defects formed in the presence of impurity atoms. Finally, a study of the resistivity recovery of the doped samples permits us to suggest an order of magnitude for the binding energy interstitial/impurity atom in the nickel matrix. (author) [French] Apres avoir brievement rappele les techniques experimentales que nous avons utilisees pour cette etude, nous exposons les resultats experimentaux obtenus sur des echantillons de nickel pur. Les stades successifs d'annihilation des defauts ponctuels crees par bombardement electronique sont mis en evidence par traitements thermiques isochrones; les cinetiques de disparition, et les energies d'activation correspondantes sont determinees. Nous etudions egalement l'effet de la dose des particules incidentes. Les resultats experimentaux sont ensuite compares avec les calculs theoriques de R.A JOHNSON sur la stabilite

  18. Compilation of the calculation elements of the electronic equipments reliability; Recueil des elements de calcul de la fiabilite des equipements electroniques

    Energy Technology Data Exchange (ETDEWEB)

    Lefevre, R.; D' Harcourt, A.; Dupuy, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    The aim of this work is to allow the practical execution of the estimated calculation of the electronic devices reliability and to standardize the source and the approach of the calculations while giving a systematic character to their execution mode. The systematic character of the calculations allows a comparison of the reliability of different materials and a rapid control of the calculations validity; at last, it brings out the use conditions of all the components of a set. A reliability calculation made according to the method described here reveals: -components badly used -the relative influence on the reliability of the set, of a component or a components group taking into account of the number, of the characteristics and of the use of these ones. At last, the results of the calculation allows to organize the exploitation (availability) and the maintenance (staff, stock of components) of the materials. The failure rates given in this book are only relating to the components service-life and do not correspond to precocious failures. (authors) [French] L'objet du present recueil est d'une part de permettre l'execution pratique du calcul previsionnel de la fiabilite des equipements electroniques et d'autre part d'uniformiser l'origine et la presentation de calculs en donnant un caractere systematique a leur mode d'execution. Le caractere systematique des calculs permet une comparaison de la fiabilite de differents materiels et un controle rapide de la validite des calculs; enfin il met en relief les conditions d'utilisation de tous les composants d'un ensemble. Un calcul de fiabilite realise selon la methode preconise par ce document permet la mise en evidence: -des composants mal utilises -de l'influence relative sur la fiabilite de l'ensemble, d'un composant ou d'un groupe de composants compte tenu du nombre, des caracteristiques et de l'utilisation de ceux-ci. Enfin, les resultats du

  19. Potentialities in electronics of new high critical temperature superconductors. Potentialites en electronique des nouveaux supraconducteurs a haute temperature critique

    Energy Technology Data Exchange (ETDEWEB)

    Hartemann, P [Thomson-CSF, 75 - Paris (FR)

    1989-09-01

    The main electronic applications of superconductors involve the signal processing, the electromagnetic wave detection and the magnetometry. Characteristics of devices based on conventional superconductors cooled by liquid helium are given and the changes induced by incorporating high-temperature superconductors are estimated. After a survey of new superconductor properties, the superconducting devices for analog or digital signal processing are reviewed. The gains predicted for high-temperature superconducting analog devices are considered in greater detail. Different sections deal with the infrared or (sub)millimeter wave detection. The most sensitive apparatuses for magnetic measurements are based on SQUIDs. Features of SQUIDs made of granular high-temperature superconducting material samples (grain boundaries behave as barriers of intrinsic junctions) are discussed.

  20. Applications of outcrop gamma-ray logging to field development and exploration

    International Nuclear Information System (INIS)

    Jordan, D.W.; Slatt, R.M.; Gillespie, R.H.; D'Agostino, A.E.; Scheihing, M.H.

    1991-01-01

    Gamma-ray logs of outcrops have been generated using two techniques. These techniques demonstrate the applicability of outcrop logging to better understand reservoir facies architecture and exploration type problems. The first logging technique employs the use of a standard logging truck and gamma-ray sonde. The truck is positioned near the top of the cliff face and the sonde is lowered to the bottom of the cliff. Gamma-ray counts are recorded as the sonde is raised at a constant rate. The second logging technique employs the use of a commercially available, hand-held, gamma-ray scintillometer. The tool measures total radiation at the outcrop. Equally-spaced measurements are made along the section and are displayed as a function of depth below a reference point. In this paper examples of gamma-ray logging experiments conducted on turbidities of the Jackfork Group (Pennsylvanian) in central and southern Arkansas are discussed, as are application of outcrop gamma-ray logging in the Long Beach Unit of Wilmington Oil Field, California, and Point Mugu (Santa Barbara Channel), California

  1. Study by electron spin resonance of the free radicals created under irradiation in glycine; Etude par la technique de resonance paramagnetique electronique des radicaux crees sous irradiation dans la glycine

    Energy Technology Data Exchange (ETDEWEB)

    Thomet, P; Rassat, A; Servoz-Gavin, P; Choudens, H de [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1967-07-01

    The free radicals created by different radiations in glycine are measured by electron spin resonance and their number is evaluated in function of the absorbed dose. This number decreases when the LET of the radiations increases ; in other words,high LET radiations gives less radiochemical effects; in contrary with the fact that high LET radiations creates more damage in biological materials. The decreasing with time of the number of free radicals and the speed of this decrease is a function of temperature; by the study of the kinetics of this decrease, an attempt has been made to prove the presence of three radicals. (authors) [French] Les radicaux crees par divers rayonnements dans la glycine sont detectes par resonance paramagnetique electronique et leur nombre est evalue en fonction de la dose. Ce nombre varie dans le sens inverse du T.E.L moyen, c'est-a-dire que les rayonnements de T.E.L eleves donnent des effets radiochimiques plus petits alors que les effets radiobiologiques sont importants avec des T.E.L eleves. La decroissance dans le temps du nombre de radicaux est observee et la vitesse de diminution des radicaux est liee a la temperature. Etudiant la cinetique de recombinaison, on peut faire l'hypothese de l'existence de 3 radicaux. (auteurs)

  2. Statistical pulses generator. Application to nuclear instrumentation (1962); Generateur d'impulsions aleatoires. Application a l'instrumentation nucleaire (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Beranger, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    This report describes a random pulses generator adapted to nuclear instrumentation. After a short survey on the statistical nature of electronic signals, the different ways for generating pulses with a Poisson's time-distribution are studied. The final generator built from a gaseous thyratron in a magnetic field is then described. Several tests are indicated : counting-rate stability, Pearson's criterion, distribution of time-intervals. Applications of the generator in 'whole testing' of nuclear instrumentation are then indicated for sealers, dead time measurements, time analyzers. In this application, pulse-height spectrums have been made by Poissonian sampling of a recurrent or random low-frequency signal. (author) [French] Cette etude decrit un generateur d'impulsions aleatoires et ses applications a l'instrumentation nucleaire. Apres un bref rappel sur la nature statistique des signaux en electronique nucleaire, sont passes en revue les principaux moyens d'obtenir des impulsions distribuees en temps suivant une loi de Poisson. Le generateur utilisant un thyratron a gaz dans un champ magnetique est ensuite decrit; diverses methodes de test sont appliquees (stabilite du taux de comptage, criterium de Pearson, spectre des intervalles ds temps). Les applications du generateur a l'electronique nucleaire dans le domaine des 'essais globaux' sont indiques: test des echelles de comptage et mesure des temps morts, test des analyseurs en temps apres division du taux de comptage par une puissance de deux, test des analyseurs multicanaux en amplitude. Pour cette derniere application, on a realise des spectres d'amplitudes suivant une loi connue, par echantillonnage poissonien d'un signal basse frequence recurrent ou aleatoire. (auteur)

  3. Application of californium-252 neutron sources for analytical chemistry

    International Nuclear Information System (INIS)

    Ishii, Daido

    1976-01-01

    The researches made for the application of Cf-252 neutron sources to analytical chemistry during the period from 1970 to 1974 including partly 1975 are reviewed. The first part is the introduction to the above. The second part deals with general review of symposia, publications and the like. Attention is directed to ERDA publishing the periodical ''Californium-252 Progress'' and to a study group of Cf-252 utilization held by Japanese Radioisotope Association in 1974. The third part deals with its application for radio activation analysis. The automated absolute activation analysis (AAAA) of Savannha River is briefly explained. The joint experiment of Savannha River operation office with New Brunswick laboratory is mentioned. Cf-252 radiation source was used for the non-destructive analysis of elements in river water. East neutrons of Cf-252 were used for the quantitative analysis of lead in paints. Many applications for industrial control processes have been reported. Attention is drawn to the application of Cf-252 neutron sources for the field search of neutral resources. For example, a logging sonde for searching uranium resources was developed. the fourth part deals with the application of the analysis with gamma ray by capturing neutrons. For example, a bore hole sonde and the process control analysis of sulfur in fuel utilized capture gamma ray. The prompt gamma ray by capturing neutrons may be used for the nondestructive analysis of enrivonment. (Iwakiri, K.)

  4. The diode pump: its application to nuclear particle counting and to the detection of rapid neutronic power excursions in atomic piles (1962); La pompe a diodes, son application au comptage de particules nucleaires et a la detection des excursions rapides de puissance neutronique d'une pile atomique (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Nicolo, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-05-15

    This work deals in particular with three applications of an electronic device whose principle is based on that of the diode pump. 1- Linear response circuit 2- Logarithmic response circuit 3- Detection of neutronic power excursions in atomic piles using a circuit or a combination of several circuits of the linear response type. Each of the applications has been studied theoretically and experimentally. Finally, the detection of rapid power excursions is extensively discussed with reference to the many methods available, emphasis being laid on the rapidity of the electronic response. (author) [French] Cet ouvrage traite plus particulierement de trois applications d'un dispositif electronique dont le principe de fonctionnement est base sur celui de la pompe a diodes. 1- Circuit a reponse lineaire 2- Circuit a reponse logarithmique 3- Detection des excursions de puissance neutronique d'une pile atomique a l'aide d'un circuit ou d'une association de plusieurs circuits a reponse lineaire. Chacune des applications fait l'objet d'une etude theorique et experimentale. Enfin, la detection des excursions rapides de puissance est tres largement discutee a travers plusieurs methodes, notamment sur la partie concernant la rapidite de reponse de l'electronique. (auteur)

  5. A study of point defects created by electron irradiation of dilute iron-carbon alloys; Etude des defauts crees par irradiation electronique dans les alliages de fer carbone dilues

    Energy Technology Data Exchange (ETDEWEB)

    Leveque, J L [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-10-01

    Resistivity and magnetic after effect (m.a.e.) measurements are used to study the influence of carbon atoms on the annealing process of point defects created by electron irradiation (3 MeV) at low temperature (20 deg. K). The presence of the carbon atoms has a strong influence on the recovery sub-stage I{sub E} and stage III. For the former, the carbon impurity traps the freely migrating iron interstitial. For the latter the effect is interpreted as being due to formation during annealing, of a carbon vacancy pair. A pronounced m.a.e. band is attributed to the reorientation of this carbon vacancy complex. All these results are coherent with the interpretation of a low temperature migrating free interstitial. (author) [French] L'influence des atomes de carbone sur le recuit des defauts ponctuels crees par irradiation electronique (3 MeV) a basse temperature (20 deg. K) dans le fer est mise en evidence par des mesures de resistivite electrique, et de trainage magnetique. Cette influence se manifeste principalement au cours du sous stade I{sub E} et du stade III de resistivite. Au sous stade I{sub E} les atomes de carbone piegeraient les interstitiels libres de fer au cours de leur migration. Le stade III est interprete comme etant du a la recombinaison du carbone dans les lacunes. Une importante bande de tramage magnetique etant attribuee a la reorientation de ce complexe. Ces resultats sont coherents avec l'interpretation faisant migrer a basse temperature l'interstitiel libre. (auteur)

  6. Study of certain random variations in the measurement of low level radioactivities by means of electric circuits (1963); Etude, au moyen de circuits electroniques, de certaines fluctuations aleatoires dans les mesures de radioactivite a bas niveau (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Moghimi, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-03-15

    The aim of this work is to find a control method which ensures that there is really a statistical distribution of pulses during the measurement of very low activities. The use of a method based on the distribution of time intervals is examined first, as well as the graphical representation to which it leads. The second method is a study of the distribution of the number of pulses in a given time interval. It makes it possible to use two tests for verifying Gauss's law: Henry's graphical test and the {chi}{sup 2} mathematical test. The electronic devices necessary for these tests have been built; they have made it possible to study the fluctuations in on installation for measuring the natural activity of carbon. (author) [French] Le but de ce travail est de rechercher des methodes de controle qui permettent de s'assurer qu'au cours de mesures de tres faibles activites, on a bien une distribution statistique des impulsions. L'utilisation d'une premiere methode basee sur la distribution des intervalles de temps est d'abord examinee, ainsi que la representation graphique a laquelle elle conduit. La deuxieme methode est une etude de la repartition du nombre d'impulsions pendant un temps determine. Elle permet l'utilisation de 2 tests de verification de la loi de Gauss: le test graphique de Henry et le test mathematique de {chi}{sup 2}. Les dispositifs electroniques necessaires pour l'utilisation de ces tests ont ete realises.; ils ont ensuite permis l'etude des fluctuations dans une installation de mesure d'activite naturelle du carbone. (auteur)

  7. Electron density and temperature study of plasmas using a millimeter-wave Fabry-Perot interferometer; Etude de la densite electronique et de la temperature de plasmas a l'aide d'un interferometre Fabry-Perot en ondes millimetriques

    Energy Technology Data Exchange (ETDEWEB)

    Bize, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    The contents of this article, which have been used as a basis for a State doctorate thesis, deal with research into focussing systems of the Fabry-Perot, millimetre wave type. With the help of this equipment, measurements have been made of the electronic density using interferometry in the range from 10{sup 9} to 10{sup 14} electrons/cm{sup 3}, and of the electron temperature by Thomson diffusion, of plasmas formed by laser ionisation and by high frequency. (author) [French] Le contenu de cet article, qui a fait l'objet d'une these d'Etat, se rapporte a l'etude des systemes focalisant de type Fabry-Perot en ondes millimetriques. A l'aide de ces dispositifs, on mesure la densite electronique par interferometrie dans la gamme de densites de 10{sup 9} a 10{sup 14} e/cm{sup 3} et la temperature electronique par diffusion Thomson de plasmas crees par ionisation laser et par haute frequence. (auteur)

  8. Electron spin resonance and E.N.D.O.R. double resonance study of free radicals produced by gamma irradiation of imidazole single crystals; Etude par resonance paramagnetique electronique et double resonance E.N.D.O.R. des radicaux libres crees par irradiation gamma de monocristaux d'imidazole

    Energy Technology Data Exchange (ETDEWEB)

    Lamotte, B [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1970-07-01

    Gamma irradiation of imidazole single crystals at 300 deg. K gives two radicals. Identification and detailed studies of their electronic and geometric structure have been made by ESR and ENDOR techniques. A study of the hydrogen bonded protons hyperfine tensor is made and let us conclude to the inexistence of movement and tunneling of these protons. The principal low temperature radical, produced by gamma irradiation at 77 deg. K has been also studied by ESR and a model has been proposed. (author) [French] L'irradiation gamma de monocristaux d'imidazole a 300 deg. K conduit a deux radicaux dont l'identification et l'etude detaillee des structures electroniques et geometriques ont ete obtenues par la resonance paramagnetique electronique (RPE) et la double resonance ENDOR. En particulier l'examen des protons de la liaison hydrogene permet de conclure, pour ceux-ci, a l'inexistence de tout mouvement par effet tunnel. De plus, l'analyse des spectres de RPE du radical principal cree par irradiation gamma de l'imidazole a 77 deg. K nous a permis de proposer un modele pour ce radical. (auteur)

  9. Electron density and temperature study of plasmas using a millimeter-wave Fabry-Perot interferometer; Etude de la densite electronique et de la temperature de plasmas a l'aide d'un interferometre Fabry-Perot en ondes millimetriques

    Energy Technology Data Exchange (ETDEWEB)

    Bize, D. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    The contents of this article, which have been used as a basis for a State doctorate thesis, deal with research into focussing systems of the Fabry-Perot, millimetre wave type. With the help of this equipment, measurements have been made of the electronic density using interferometry in the range from 10{sup 9} to 10{sup 14} electrons/cm{sup 3}, and of the electron temperature by Thomson diffusion, of plasmas formed by laser ionisation and by high frequency. (author) [French] Le contenu de cet article, qui a fait l'objet d'une these d'Etat, se rapporte a l'etude des systemes focalisant de type Fabry-Perot en ondes millimetriques. A l'aide de ces dispositifs, on mesure la densite electronique par interferometrie dans la gamme de densites de 10{sup 9} a 10{sup 14} e/cm{sup 3} et la temperature electronique par diffusion Thomson de plasmas crees par ionisation laser et par haute frequence. (auteur)

  10. Consistency between GRUAN sondes, LBLRTM and IASI

    Directory of Open Access Journals (Sweden)

    X. Calbet

    2017-06-01

    Full Text Available Radiosonde soundings from the GCOS Reference Upper-Air Network (GRUAN data record are shown to be consistent with Infrared Atmospheric Sounding Instrument (IASI-measured radiances via LBLRTM (Line-By-Line Radiative Transfer Model in the part of the spectrum that is mostly affected by water vapour absorption in the upper troposphere (from 700 hPa up. This result is key for climate data records, since GRUAN, IASI and LBLRTM constitute reference measurements or a reference radiative transfer model in each of their fields. This is specially the case for night-time radiosonde measurements. Although the sample size is small (16 cases, daytime GRUAN radiosonde measurements seem to have a small dry bias of 2.5 % in absolute terms of relative humidity, located mainly in the upper troposphere, with respect to LBLRTM and IASI. Full metrological closure is not yet possible and will not be until collocation uncertainties are better characterized and a full uncertainty covariance matrix is clarified for GRUAN.

  11. The generation of harmonics of the electron cyclotron half-frequency in a double-beam interaction experiment; Generation d'harmoniques de la demi-frequence giromagnetique electronique dans un systeme 'double-faisceau'

    Energy Technology Data Exchange (ETDEWEB)

    Olivain, J [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1966-06-01

    The generation of harmonics of the electron cyclotron half-frequency in a double-beam interaction experiment has been studied. A theoretical discussion is presented in which the transverse velocity distributions are represented by Dirac delta functions. The experimental measurements show the structure of the waves generated, for the fundamental mode (( {omega}={omega}/2).ce), i. e., their azimuthal wave number, wave length and radial profile of the oscillating potential, density and current. The quasi-electrostatic character of these waves has been established from these results by evaluating the ratio: vectorial product ({nabla}, E) / scalar product ({nabla}, E) which is always much smaller than unity. Measurements have also been made of the amplitudes and line-widths of several harmonics as well as the growth rate of the first of them. Finally, a number of observations have been made which show that nonlinear wave interactions play an important role in this system and which suggest an interpretation based on this mechanism for the generation of high order harmonics. (author) [French] Nous presentons les resultats obtenus sur la generation d'harmoniques de la demi-frequence giromagnetique electronique dans une experience interraction 'double-faisceau'. Nous discutons theoriquement ce systeme dans lequel les vitesses transversales sont introduites sous forme de distributions de Dirac. Les mesures experimentales ont permis, par le mode fondamental (({omega}={omega})/2.ce), de connaitre la structure des ondes engendrees (nombre d'onde 2 azimutal - longueur d'onde - profil radial du potentiel oscillant, amplitude des perturbations de potentiel, de densite et de courant). Le caractere quasi-electrostatique de ces ondes a pu etre etabli a partir de ces resultats en evaluant le rapport: produit vectoriel ({nabla}, E) / produit scalaire ({nabla}, E) qui reste toujours tres inferieur a l'unite. Les mesures ont egalement porte sur l'amplitude et la largeur des raies ainsi

  12. Application of a proportional counter to some particular cases of {alpha} measurements; Applications d'un compteur proportionnel a quelques cas particuliers de mesures {alpha}

    Energy Technology Data Exchange (ETDEWEB)

    Ferret, J; Gasc, M T; Le Du, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    de presentation variee. - IV - L'ensemble realise comprend un compteur proportionnel de dimensions reduites associe a une sonde {gamma} ainsi que l'appareillage electronique auxiliaire (hautes tensions stabilisees, amplificateurs, unite de coincidences, echelle de comptage). (auteurs)

  13. Lexicon on automatic network operation. 1, computing and electronics. Lexique de l'exploitation automatisee du reseau. Fascicule 1: informatique et electronique

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    This bilingual dictionary covers terminology relating to the operation of electric power networks. This particular volume includes those terms applicable to data processing, computing, electricity and electronics, telecommunications, and related equipment and processes. It is intended for use by specialists working in the field of technical specifications and in computerized network operation systems as well as for use by those working with such systems. It is in two parts: French to English and English to French.

  14. Reduce consumption, improve production. Electronic adjustable speed drives and high performance motors; Consommez moins, produisez mieux. Variateurs electroniques de vitesse et moteurs performants

    Energy Technology Data Exchange (ETDEWEB)

    David, A.; Pratmarty, D.; Dessoude, M. [Electricite de France (EDF), 92 - Clamart (France). Direction des Etudes et Recherches

    1995-10-01

    The electric power consumption from electric motors accounts for up to two third of industry`s electric power consumption. When equipped with electronic adjustable speed drives (ASD), energy savings of 10 to 50 percent, with an estimated average of 25 percent, may be achieved for pumps, fans and compressors, which account for 63 percent of motor applications. The advantages of electronic ASD, the installation recommendations which should be applied, the sensibility of ASDs to power cuts and harmonics, the characteristics of high efficiency motors, the energy aspects of motors with or without electronic ASD, and the EDF-ADEME (French energy conservation agency) approach for electricity demand side management, are described

  15. Application of new fast-electronic techniques to the determination of the exact moment of particle detection; Application des techniques nouvelles de l'electronique rapide a la determination de l'instant precis de detection d'une particule

    Energy Technology Data Exchange (ETDEWEB)

    Hesse, M [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1965-06-01

    Fluctuations in the time response of photomultipliers employed in scintillation counting are studied and experimentally checked. Statistical measurements of the output pulses show that the relative variance of the time fluctuations is minimum for the portion located around the bending point of the leading edge. A shaping circuit using this property is described. Experimental results are given, showing an improvement of the resolving time. (author) [French] Les fluctuations de la reponse temporelle des photomultiplicateurs, utilises dans les detecteurs a scintillations, sont etudiees et mesurees experimentalement. L'etude statistique des signaux de sortie montre que les fluctuations en temps presentent une variance relative minimale pour la region situee autour du point d'inflexion du front de montee. Un circuit de mise en forme utilisant cette propriete est decrit. Des resultats experimentaux sont donnes; ils montrent une amelioration sensible du pouvoir de resolution. (auteur)

  16. NMR of proteins (4Fe-4S): structural properties and intramolecular electron transfer; RMN de proteines (4Fe-4S): proprietes structurales et transfert electronique intramoleculaire

    Energy Technology Data Exchange (ETDEWEB)

    Huber, J G

    1996-10-17

    NMR started to be applied to Fe-S proteins in the seventies. Its use has recently been enlarged as the problems arising from the paramagnetic polymetallic clusters ware overcome. Applications to [4Fe-4S] are presented herein. The information derived thereof deepens the understanding of the redox properties of these proteins which play a central role in the metabolism of bacterial cells. The secondary structure elements and the overall folding of Chromatium vinosum ferredoxin (Cv Fd) in solution have been established by NMR. The unique features of this sequence have been shown to fold as an {alpha} helix at the C-terminus and as a loop between two cysteines ligand of one cluster: these two parts localize in close proximity from one another. The interaction between nuclear and electronic spins is a source of additional structural information for (4Fe-AS] proteins. The conformation of the cysteine-ligands, as revealed by the Fe-(S{sub {gamma}}-C{sub {beta}}-H{sub {beta}})Cys dihedral angles, is related to the chemical shifts of the signals associated with the protons of these residues. The longitudinal relaxation times of the protons depend on their distance to the cluster. A quantitative relationship has been established and used to show that the solution structure of the high-potential ferredoxin from Cv differs significantly from the crystal structure around Phe-48. Both parameters (chemical shifts and longitudinal relaxation times) give also insight into the electronic and magnetic properties of the [4Fe-4S] clusters. The rate of intramolecular electron transfer between the two [4FE-4S] clusters of ferredoxins has been measured by NMR. It is far slower in the case of Cv Fd than for shorter ferredoxins. The difference may be associated with changes in the magnetic and/or electronic properties of one cluster. The strong paramagnetism of the [4Fe-4S] clusters, which originally limited the applicability of NMR to proteins containing these cofactors, has been proven

  17. Contribution to the experimental study of wave particle interactions in a plasma having a two-population electronic distribution function; Contribution a l'etude experimentale de l'interaction ondes-particules dans un plasma presentant une fonction de distribution electronique a deux populations

    Energy Technology Data Exchange (ETDEWEB)

    Frank, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    The aim of this work is the experimental study of the interaction between electrostatic waves and electrons in a plasma characterized by a so called 'bump in tail' distribution function. To study experimentally the mechanism of this interaction it is necessary to measure precisely the electron distribution and its evolution in space or in time. This was performed with an electrostatic separation probe which was designed especially. We measured also the evolution in space and time of the noise spectrum. We studied this mechanism in two different regimes of our discharge: - In the first case the distribution function is very close to that describing the interaction of a semi-infinite plasma with a cold beam injected at its edge. We showed that the instability resulting from this interaction is convective and that the growth of the waves results in a very important modification of the distribution function. The ionization due to the electric field related to the waves is also important. This modification is similar to that described by the quasi linear theory. The mechanism described by this theory remains then qualitatively valid in a strongly non linear case. - In the second case the conditions necessary for the quasi linear theory to be valid are satisfactorily fulfilled. It is then possible to measure, simultaneously, and precisely, the evolution of the distribution function and of the noise spectrum. From these measurements one can deduce the mechanism of the energy exchange between waves and particles and show that it is in good agreement with that described by the quasi linear theory. (author) [French] On presente ici l'etude experimentale detaillee du mecanisme de l'echange d'energie entre les oscillations e la frequence plasma des electrons et des electrons energetiques dans un plasma presentant une fonction de distribution du type a 'double bosse'. Pour realiser cette etude on a mis au point, une 'sonde a separation electrostatique' qui permet de mesurer

  18. Electronic de-multipliers; Demultiplicateurs electroniques

    Energy Technology Data Exchange (ETDEWEB)

    Ailloud, J

    1948-07-01

    The counting of a huge number of events, randomly or periodically distributed, requires the use of electronic counters which can work with a flow of up to 500000 events per second, while mechanical systems have a much lower resolution which leads to an important percentage of losses (non-counted events). Thus, hybrid systems are generally used which comprise an electronic part with fast counting capabilities but low recording capacities, and a mechanical part for the recording of the successive resets of the electronic part. This report describes the basic elementary circuits of these electronic counters (de-multipliers): dividers by 2 and 5 and flip-flop circuits using triode and pentode valves for the counting of events in the decimal system. (J.S.)

  19. Electronic methods for discriminating scintillation shapes; Methodes electroniques de discrimination des formes des impulsions issues de scintillateurs; Ehlektronnye metody diskriminatsii form stsintillyatsii; Metodos electronicos de discriminacion de forma de impulsos de centelleo

    Energy Technology Data Exchange (ETDEWEB)

    Forte, M; Konsta, A; Maranzana, C [European Atomic Energy Community, CCR, ISPRA (Italy)

    1962-04-15

    As reported previously, the scintillation pulse shape, which is characteristic of the excitating particle type (electron, proton, alpha, etc.), can be converted into a pulse-height independent parameter. This displays, by means of a multichannel analyser, the composition of a mixed particle beam which excites the scintillator. This method was successful with several scintillators, both of the organic and the inorganic type. Details are given of the electronic techniques used for converting the pulse shapes. For the simpler case of discrimination between only two classes of pulses (e.g. neutron-gamma discrimination) the use of passive networks has also been considered possible for further improvements and simplifications. A few networks were tried, the main results being that, in the presence of gamma background, the discrimination of recoil protons in liquid scintillators was extended to small pulses of a few decades of photoelectrons and the discrimination of neutron-capture fragments in boronloaded liquids was obtained. Some of these networks operated with pulses of the same polarity, from two of the last dynode, or even with the output from a single electrode. This may be useful when it is convenient to use the anode independently, e. g. for operating fast time circuits. (author) [French] On sait que la forme des impulsions delivrees par un detecteur a scintillations, qui est fonction du type de particule excitatrice (electron, proton, particule alpha, etc.), peut etre convertie en un parametre d'amplitude d'impulsion independant. Cette propriete permet de determiner, a l'aide d'un selecteur multicanaux, la composition d'un faisceau de particules mixte qui frappe le scintillateur. Cette methode a ete utilisee avec succes dans le cas de plusieurs scintillateurs, tant organiques qu'inorganiques. Les auteurs donnent des precisions sur les procedes electroniques employes pour convertir la forme de l'impulsion. Dans le cas le plus simple, celui ou la discrimination

  20. Measurement of the electron density of a plasma by interferometry with a He - Ne laser ({lambda} = 3.39 {mu}); Mesure de la densite electronique d'un plasma par interferometrie avec un laser He - Ne ({lambda} = 3.39 {mu})

    Energy Technology Data Exchange (ETDEWEB)

    Belland, P [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-07-01

    The characteristics of the He-Ne gas laser used in a simple interferometric technique have been studied. After passing through the plasma, the beam is reflected back into the laser cavity, and the intensity of the laser itself, modulated by this optical feedback, is used to observe the fringes. Furthermore, owing to the coupling of the two laser transitions 0.63{mu} (red) and 3.39{mu} (infra red), interferences in the infra red can be detected by a simple photomultiplier monitoring the red line. This method has been applied to two plasma machines (E.P.P.E. and SABLIER) for spatial and temporal measurements of the mean electron density. (author) [French] Nous avons etudie les caracteristiques d'un laser a gaz He-Ne utilise dans une technique simple d'interferometrie. La lumiere qui traverse le plasma est reinjectee dans le laser, et l'intensite propre de celui-ci, modulee par cette reinjection, sert a observer les franges. De plus, a cause du couplage des deux transitions laser: 0.63{mu} (rouge) et 3.39{mu} (infrarouge), les interferences dans l'infrarouge peuvent etre detectees par un simple photomultiplicateur sensible au rouge. Nous avons applique cette methode a deux machines a plasma (E.P.P.E. et SABLIER) pour la mesure de la densite electronique moyenne en fonction du temps et de l'espace. (auteur)

  1. Electronic device for measuring the polarization parameter in the {pi}{sup -}p {yields} {pi}{sup 0}n charge exchange reaction on a polarized proton target; Un appareillage electronique destine a la mesure du parametre de polarisation dans la reaction d'echange de charge {pi}{sup -}p {yields} {pi}{sup 0}n sur cible de protons polarises

    Energy Technology Data Exchange (ETDEWEB)

    Brehin, S [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-12-15

    An electronic apparatus has been constructed to measure the polarization parameter P{sub 0}(t) in {pi}{sup -}p {yields} {pi}{sup 0}n charge exchange scattering at 5.9 GeV/c and 11,2 GeV/c on polarized proton target. This device insures triggering of a heavy plate spark chamber, allowing visualisation of {gamma} rays from the {pi}{sup 0} decays when the associated neutron offers suitable characteristics in direction and energy. The neutron is detected by an array of 32 counters and his energy is measured by a time of flight method. Electronic circuits of this apparatus are described as test and calibration methods used. (author) [French] Un appareillage electronique a ete realise pour mesurer le parametre de polarisation P{sub 0}(t) dans la reaction d'echange de charge {pi}{sup -}p {yields} {pi}{sup 0}n a 5,9 GeV/c et 11,2 GeV/c sur une cible de protons polarises. Ce dispositif assure le declenchement d'une chambre a etincelles a plaques lourdes, permettant de visualiser les {gamma} de desitegration du {pi}{sup 0}, lorsque le neutron associe presente les caracteristiques convenables en direction et en energie. Le neutron est detecte par un ensemble de 32 compteurs et son energie est mesuree par une methode de temps de vol. Les circuits composant cet appareillage sont decrits ainsi que les methodes d'etalonnage et de verification utilisees. (auteur)

  2. New methods and applications in emission spectroscopy (1960); Methodes et applications nouvelles en spectroscopie d'emission (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Baudin, G [Commissariat a l' Energie Atomique, Grenoble (France).Centre d' Etudes Nucleaires

    1960-07-01

    Emission spectroscopy, are already well-established instrumental analytical technique, has in recent years known important developments. Two mains factors are responsible; firstly the demands of metallurgy for purer and purer materials or alloys which are increasingly complex and difficult to analyse by chemical means; secondly, progress in optics, especially in the production of gratings, and in electronics in the field of photomultiplier tubes. We will not here catalogue all the new applications and methods, but we will consider a few amongst the most representative outside the conventional field. (author) [French] La spectroscopie d'emission, technique analytique instrumentale deja ancienne, a pris, depuis quelques annees, une extension notable. Deux facteurs principaux ont contribue a ce succes: d'une part, l'exigence de la metallurgie en materiaux de plus en plus pur ou en alliages de plus en plus complexes, difficiles a analyser chimiquement, d'autre part, les progres realises en optique, principalement dans la fabrication des reseaux, et en electronique dans le domaine des tubes photomultiplicateurs. Nous ne ferons pas ici le recensement de toutes les applications ou methodes nouvelles, mais nous en choisirons quelques unes des plus representatives hors du domaine classique. (auteur)

  3. Electronic device for measuring the polarization parameter in the {pi}{sup -}p {yields} {pi}{sup 0}n charge exchange reaction on a polarized proton target; Un appareillage electronique destine a la mesure du parametre de polarisation dans la reaction d'echange de charge {pi}{sup -}p {yields} {pi}{sup 0}n sur cible de protons polarises

    Energy Technology Data Exchange (ETDEWEB)

    Brehin, S. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-12-15

    An electronic apparatus has been constructed to measure the polarization parameter P{sub 0}(t) in {pi}{sup -}p {yields} {pi}{sup 0}n charge exchange scattering at 5.9 GeV/c and 11,2 GeV/c on polarized proton target. This device insures triggering of a heavy plate spark chamber, allowing visualisation of {gamma} rays from the {pi}{sup 0} decays when the associated neutron offers suitable characteristics in direction and energy. The neutron is detected by an array of 32 counters and his energy is measured by a time of flight method. Electronic circuits of this apparatus are described as test and calibration methods used. (author) [French] Un appareillage electronique a ete realise pour mesurer le parametre de polarisation P{sub 0}(t) dans la reaction d'echange de charge {pi}{sup -}p {yields} {pi}{sup 0}n a 5,9 GeV/c et 11,2 GeV/c sur une cible de protons polarises. Ce dispositif assure le declenchement d'une chambre a etincelles a plaques lourdes, permettant de visualiser les {gamma} de desitegration du {pi}{sup 0}, lorsque le neutron associe presente les caracteristiques convenables en direction et en energie. Le neutron est detecte par un ensemble de 32 compteurs et son energie est mesuree par une methode de temps de vol. Les circuits composant cet appareillage sont decrits ainsi que les methodes d'etalonnage et de verification utilisees. (auteur)

  4. Microscopie thermique par sonde thermoélectrique

    OpenAIRE

    Bontempi , Alexia

    2015-01-01

    This PhD thesis deals with the development of a thermalmicroscope using a local probe. This imagingsystem presents two functioning modes that allow determining either surface temperature or thermalproperties of materials. A micro-wire thermocouple is used as a thermal sensor. It is less invasiveand allows measuring the surface temperature with a large temperature range. Furthermore, themicroscope offers an advantage to be less sensitive to the optical nature of a sample surface thanoptical me...

  5. Aqueous root extract of Dicoma anomala Sond ameliorates ...

    African Journals Online (AJOL)

    isoproterenol–induced myocardial infarction in Wistar rats ... myocardial rats treated with D. anomala revealed evidence of oedema and ... in conventional medicines of natural sources ... The use of herbal therapies against numerous diseases ...

  6. Aqueous root extract of Dicoma anomala Sond ameliorates ...

    African Journals Online (AJOL)

    Purpose: To evaluate the protective potentials of the aqueous root extract of Dicoma anomala (AQRED) against isoproterenol (ISP)-induced myocardial damage in Wistar rats. Methods: Myocardial damage was induced in Wistar rats by isoproterenol (60 mg/kg body weight, b.w.) Various concentrations (125, 250, and 500 ...

  7. Ultra-Low Dark Current HgCdTe Detector in SWIR for Space Applications

    Science.gov (United States)

    Cervera, C.; Boulade, O.; Gravrand, O.; Lobre, C.; Guellec, F.; Sanson, E.; Ballet, P.; Santailler, J. L.; Moreau, V.; Zanatta, J. P.; Fieque, B.; Castelein, P.

    2017-10-01

    This paper presents recent developments at Commissariat à l'Energie atomique, Laboratoire d'Electronique et de Technologie de l'Information infrared laboratory on processing and characterization of p-on- n HgCdTe (MCT) planar infrared focal plane arrays (FPAs) in short-wave infrared (SWIR) spectral band for the astrophysics applications. These FPAs have been grown using both liquid phase epitaxy and molecular beam epitaxy on a lattice-matched CdZnTe substrate. This technology exhibits lower dark current and lower series resistance in comparison with n-on- p vacancy-doped architecture and is well adapted for low flux detection or high operating temperature. This architecture has been evaluated for space applications in long-wave infrared and very-long-wave infrared spectral bands with cut-off wavelengths from 10 μm up to 17 μm at 78 K and is now evaluated for the SWIR range. The metallurgical nature of the absorbing layer is also examined and both molecular beam epitaxy and liquid phase epitaxy have been investigated. Electro-optical characterizations have been performed on individual photodiodes from test arrays, whereas dark current investigation has been performed with a fully functional readout integrated circuit dedicated to low flux operations.

  8. Study of the effect of neutron and electron irradiations on the low temperature thermal conductivity of germanium and silicon; Etude de l'effet des irradiations neutronique et electronique sur la conductibilite thermique aux basses temperatures du germanium et du silicium

    Energy Technology Data Exchange (ETDEWEB)

    Vandevyver, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-06-15

    The main results obtained from this work are the following: 1 Neutron irradiation (at 300 deg. K) produces lattice defects in germanium and silicon, and a corresponding very large lowering of the thermal conductivity is observed in the low temperature region (4-300 ). The results obtained have been explained with the help of the following hypotheses: for silicon a scattering of phonons by the stress fields produced by the defects; for germanium, a supplementary scattering of the electron phonon type. 2 Annealing treatments carried out on these materials above 373 deg. K restored the thermal conductivity over the whole temperature range of the measurements (4-300 deg. K); in the case of both germanium and silicon there were two steps in the annealing process. 3 A study of the thermal conductivity of germanium (initially P or N) after an electronic irradiation showed that the scattering of phonons could depend on the state of charge of the defects thus produced. (author) [French] Les principaux resultats obtenus au cours de ce travail sont les suivants : 1 Les irradiations neutroniques (a 300 deg. K) introduisent des defauts de reseau dans le germanium et le silicium et l'on observe correlativement pour ces materiaux, une tres importante diminution de conductibilite thermique dans le domaine des basses temperatures (4-300 deg. K). Les resultats obtenus ont pu etre interpretes en admettant principalement: pour le silicium, une diffusion des phonons par les champs de contrainte dus aux defauts; pour le germanium, une diffusion additionnelle du type electron-phonon. 2 Des recuits effectues sur ces materiaux au-dessus de 373 deg. K ont montre une restauration de la conductibilite thermique dans tout l'intervalle de temperature de mesure (4-300 deg. K) et comportant pour le germanium et le silicium, deux etapes de recuit 3 L'etude de la conductibilite thermique de germanium (initialement N ou P) apres une irradiation electronique, a montre que la diffusion des phonons

  9. Contribution to the study of time-resolution in pulse electronics for nuclear physics: phase control circuits; Contribution a l'etude de la resolution en temps de l'electronique impulsionnelle pour physique nucleaire: les circuits de mise en phase

    Energy Technology Data Exchange (ETDEWEB)

    Cortet, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    Phase control circuits make it possible to improve quite markedly the time resolution in pulse electronics. They replace a random pulse, of which the time of arrival with respect to a reference zero is being measured, by another pulse whose phase is well determined with respect to that, of a clock taken as reference. The time spectrum of the output, delayed, can always be situated inside channels of width {delta}T defined by the clock. The time statistics of the events analyzed is always correct even if the transition time for the circuits defining the channels represents a large fraction of {delta}T: the coding of the time becomes perfect, The phase control circuits, used in precision chronometry, are widely applied in Nuclear Physics since the lime spectra obtained are representative, indirectly, of certain values which are required to be measured with great accuracy. A description is given of: the constitution and operation of phase control circuits; a chain with automatic analysis and automatic reading, built for testing these circuits. Finally the measurement results are given. (author) [French] Les circuits de mise en phase permettent d'ameliorer notablement la resolution en temps de l'electronique impulsionnelle. Ils substituent a une impulsion aleatoire, dont on cherche a mesurer l'instant d'arrivee par rapport a un instant pris pour origine, une autre impulsion dont la phase est bien determinee par rapport a celle d'une horloge prise comme reference. Le spectre temporel de sortie, retarde, peut toujours etre situe a l'interieur des canaux de largeur {delta}T, definis par l'horloge. La statistique temporelle des evenements analyses est toujours correcte, meme si la duree de transition des circuits definissant les canaux represente une grande fraction de {delta}T: le codage de temps devient parfait. Les circuits de mise en phase, utilises en chronometrie fine, sont tres employes en Physique Nucleaire car les spectres temporels oblenus sont representatifs

  10. Study of a pulsed discharge in hydrogen using the far ultraviolet emission of an additional element: electron temperature measurement; Etude d'une decharge pulsee dans l'hydrogene a partir de l'emission dans l'ultraviolet lointain d'un element additionnel: mesure de la temperature electronique

    Energy Technology Data Exchange (ETDEWEB)

    Schwob, J L [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-06-15

    Ionization and excitation of an additional element in a pulsed annular discharge in hydrogen at low pressure (T.A.2000) are described by means of a simple coronal type analytical model. This model allows us to interpret the time variation of the intensity of spectral lines observed in the vacuum ultraviolet region. From this analysis two methods of electron temperature determination are deduced. The first method is based on the apparition time measurement of the intensity maximum for the spectral lines emitted from successive ions of the additional element (nitrogen). In the second method the electron temperature is determined from the intensity ratio of two spectral lines of an alkali-like ion. The transition couples (2s-2p, 2s-3p) and (2s-2p, 3s-3p) of C IV, N V and O VI have been used. The results obtained with these two independent methods are in good agreement. The electron temperature varies from a few electron-volts at the beginning of the discharge, to 70 eV at the time of N V emission (at 55 {mu}s), before the current maximum in the discharge (at 170 {mu}s). (author) [French] On etudie l'ionisation et l'excitation d'un element additionnel dans une decharge annulaire pulsee dans l'hydrogene sous faible pression (T.A.2000) a ralde d'un modele analytique simple du type coronal. Ce modele permet d'interpreter l'evolution de l'intensite des raies spectrales observees dans l'ultraviolet lointain. On deduit de cette etude deux methodes de determination de la temperature electronique. La premiere est basee sur la meaure des temps d'apparition des maximums d'intensite des raies emises par les ions successifs de l'element additionnel (azote). Dans la deuxieme methode la temperature est determinee a partir du rapport d'intensite des deux raies d'un ion alcalinoide. On a utilise les couples de transitions (2s-2p, 2s-3p) et (2e-2p, 3s-3p) des ions C IV, N V et 0 VI. Les resultats obtenus par ces deux voies independantes montrent un assez bon accord. La temperature

  11. Study of electronic field emission from large surfaces under static operating conditions and hyper-frequency; Etude de l'emision electronique par effet de champ sur des surfaces larges en regime statique et hyperfrequence

    Energy Technology Data Exchange (ETDEWEB)

    Luong, M

    1997-09-01

    The enhanced electronic field emission from large area metallic surfaces lowers performances of industrial devices that have to sustain high electric field under vacuum. Despite of numerous investigations in the past, the mechanisms of such an emission have never been well clarified. Recently, research in our laboratory has pointed out the importance played by conducting sites (particles and protrusions). A refined geometrical model, called superposed protrusions model has been proposed to explain the enhanced emission by local field enhancement. As a logical continuation, the present work aims at testing this model and, in the same time, investigating the means to suppress the emission where it is undesirable. Thus, we have showed: the cause of current fluctuations in a continuous field regime (DC), the identity of emission characteristics ({beta}, A{sub e}) in both radiofrequency (RF) and DC regimes, the effectiveness of a thermal treatment by extern high density electronic bombardment, the effectiveness of a mechanical treatment by high pressure rinsing with ultra pure water, the mechanisms and limits of an in situ RF processing. Furthermore, the electronic emission from insulating particles has also been studied concurrently with a spectral analysis of the associated luminous emission. Finally, the refined geometrical model for conducting sites is reinforced while another model is proposed for some insulating sites. Several emission suppressing treatments has been explored and validated. At last, the characteristic of a RF pulsed field emitted electron beam has been checked for the first time as a possible application of such a field emission. (author)

  12. Modeling of polarization phenomena due to RF sheaths and electron beams in magnetized plasma; Modelisation de phenomenes de polarisation par des gaines rf et des faisceaux electroniques dans un plasma magnetise

    Energy Technology Data Exchange (ETDEWEB)

    Faudot, E

    2005-07-01

    This work investigates the problematic of hot spots induced by accelerated particle fluxes in tokamaks. It is shown that the polarization due to sheaths in the edge plasma in which an electron beam at a high level of energy is injected, can reach several hundreds volts and thus extend the deposition area. The notion of obstructed sheath is introduced and explains the acceleration of energy deposition by the decreasing of the sheath potential. Then, a 2-dimensional fluid modeling of flux tubes in front of ICRF antennae allows us to calculate the rectified potentials taking into account RF polarization currents transverse to magnetic field lines. The 2-dimensional fluid code designed validates the analytical results which show that the DC rectified potential is 50% greater with polarization currents than without. Finally, the simultaneous application of an electron beam and a RF potential reveals that the potentials due to each phenomenon are additives when RF potential is much greater than beam polarization. The density depletion of polarized flux tubes in 2-dimensional PIC (particles in cells) simulations is characterized but not yet explained. (author)

  13. Study of electronic field emission from large surfaces under static operating conditions and hyper-frequency; Etude de l'emision electronique par effet de champ sur des surfaces larges en regime statique et hyperfrequence

    Energy Technology Data Exchange (ETDEWEB)

    Luong, M

    1997-09-01

    The enhanced electronic field emission from large area metallic surfaces lowers performances of industrial devices that have to sustain high electric field under vacuum. Despite of numerous investigations in the past, the mechanisms of such an emission have never been well clarified. Recently, research in our laboratory has pointed out the importance played by conducting sites (particles and protrusions). A refined geometrical model, called superposed protrusions model has been proposed to explain the enhanced emission by local field enhancement. As a logical continuation, the present work aims at testing this model and, in the same time, investigating the means to suppress the emission where it is undesirable. Thus, we have showed: the cause of current fluctuations in a continuous field regime (DC), the identity of emission characteristics ({beta}, A{sub e}) in both radiofrequency (RF) and DC regimes, the effectiveness of a thermal treatment by extern high density electronic bombardment, the effectiveness of a mechanical treatment by high pressure rinsing with ultra pure water, the mechanisms and limits of an in situ RF processing. Furthermore, the electronic emission from insulating particles has also been studied concurrently with a spectral analysis of the associated luminous emission. Finally, the refined geometrical model for conducting sites is reinforced while another model is proposed for some insulating sites. Several emission suppressing treatments has been explored and validated. At last, the characteristic of a RF pulsed field emitted electron beam has been checked for the first time as a possible application of such a field emission. (author)

  14. Production and study of mixed Al-Al{sub 2}O{sub 3} thin films for passive electronic circuits; Realisation et etude des couches minces mixtes Al-Al{sub 2}O{sub 3} pour circuits electroniques passifs

    Energy Technology Data Exchange (ETDEWEB)

    Pruniaux, B [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

    1967-07-01

    A new vacuum deposition process, named reactive evaporation, is used to realize passive thin film circuits. Using aluminium, oxidized at various steps in its vapor phase, we obtain: - Al-Al{sub 2}O{sub 3} cermet resistors (R{sub {open_square}} = 10000 {omega}{sub {open_square}}, CTR <{+-} 150 ppm/deg. C) which show oscillations of the resistivity versus the thickness of the layer, in distinction to classical theory. - Al{sub 2}O{sub 3} capacitors (C{sub {open_square}} = 60000 pf/cm{sup 2}, tg {delta} < 0.5 per cent). These thin film components present good electrical behaviour and should find interesting applications in integrated circuits. (author) [French] Une nouvelle technique de depot sous vide, l'evaporation reactive est utilisee pour realiser des circuits passifs en couches minces. En oxydant, en phase vapeur, de l'aluminium a differents degres, on obtient: - des resistances en cermet Al-Al{sub 2}O{sub 3} (R{sub {open_square}} = 10000 {omega}{sub {open_square}}, CTR <{+-} 150 ppm) dont Ia resistivite oscille en fonction de l'epaisseur, contrairement aux previsions de la theorie classique. - Des capacites en Al{sub 2}O{sub 3} (C{sub {open_square}} = 60000 pf/cm{sup 2}, tg {delta} < 0.5 pour cent). Ces elements presentent de bonnes caracteristiques electriques et seraient avantageusement utilises en circuits integres. (auteur)

  15. Study of thermodynamics and electronics properties of hybrids of substituted Haucke compounds; Contribution a l'etude des proprietes thermodynamiques et electroniques d'hydrures de composes de Haucke substitues

    Energy Technology Data Exchange (ETDEWEB)

    Crivello, J.C

    2005-06-15

    This manuscript presents a combined experimental and theoretical contribution to the study of the substituted Haucke phase AB5. These compounds can reversibly absorb hydrogen under conditions of pressure and temperature satisfactory for many technological applications including hydrogen storage. The thermodynamic characterization of the solid-gas reaction was carried out for mono and poly-substituted compounds. In the respect of good conditions of growth (decomposition) of the hydride phase, we sought to determine the thermodynamic trajectories allowed during some various transformations. The experimental results showed that the rate of transformation and the hierarchy of the return-points memory are the only parameters allowing to draw a general law related to the irreversible character of hysteresis. These systems evolve in 'static' mode, independent of the time and whatever the nature of host materials. Moreover, the effect of substitution elements on electronic properties has been studied using ab initio band structure calculations for the ANi{sub 5} (A=La, Y, Ca) and LaNi{sub 5-x}M{sub x} compounds, where M is an element of the type s-p (Al, Si, Ge, Sn), of type s (Cu), or a transition metal (Mn, Fe, Co). While dissociating the structural effects, the role of the chemical interaction with hydrogen was analyzed. These results made it possible to identify the factors which control the stability of the hydrides and their maximum absorption capacity. The bulk moduli of these materials were calculated and their variation was discussed in relation to the properties of hydrogen absorption. (author)

  16. Studies of suprathermal emission due to cyclotron-electronic heating of the tokamak TCV plasma; Etudes du rayonnement suprathermique emis lors du chauffage cyclotronique electronique du plasma du tokamak TCV

    Energy Technology Data Exchange (ETDEWEB)

    Blanchard, P

    2002-07-01

    Photo sensitization of wide band gap semiconductors is used in a wide range of application like silver halide photography and xerography. The development of a new type of solar cells, based on the sensitization of meso porous metal oxide films by panchromatic dyes, has triggered a lot of fundamental research on electron transfer dynamics. Upon excitation, the sensitizer transfers an electron in the conduction band of the semiconductor. Recombination of the charge separated state is prevented by the fast regeneration of the dye by an electron donor present in solution. Until recently, most of the work in this area has been focused on the competition between the recombination and the regeneration processes, which take place in the nanosecond to millisecond regime. With the development of solid-state femtosecond laser, the measurement of the dynamics of the first electron transfer step occurring in the solar cell has become possible . Electron injection from ruthenium(Il) poly pyridyl complexes into titanium dioxide has been found to occur with a poly exponential rate, with time constants ranging from < 100 fs up to > 10 ps. In spite of the lately acquired capacity to measure the dynamics of these reactions, the physical meaning of this poly exponential kinetics and the factors that can influence this process are still poorly understood. In this work, the development of a new femtosecond pump-probe spectrometer, intended to monitor the ultrafast dynamics of electron injection, is presented. The study of this process requires an excellent temporal resolution and a large wavelength tunability to be able to excite a great variety of dyes and to probe the different products of the reaction. These specifications were met using the latest progress made in optical parametric amplification, which allowed the construction of a versatile experimental set-up. The interfacing by computer of the different devices used during the experiments increase the ease of use of the set

  17. Meteorites as space probes for cosmic rays; Les meteorites en tant que sondes spatiales pour les rayons cosmiques; Meteority v kachestve prob mezhplanetnogo prostranstva dlya izucheniya kosmicheskikh luchej; Los meteoritos como sondas espaciales para evaluar la actividad inducida por los rayos cosmicos

    Energy Technology Data Exchange (ETDEWEB)

    Schaeffer, O A; Stoenner, R W; Davis, R Jr [Chemistry Department, Brookhaven National Laboratory, Upton, L. I., NY (United States)

    1962-01-15

    Meteorites as space probes for cosmic rays. An experiment has been performed to test the spatial constancy of high-energy cosmic radiation within the solar system by measuring a short-lived and a long-lived cosmic-ray-induced radioactivity in a recently fallen meteorite. This test depends on the fact that meteorites have highly eccentric orbits and therefore serve as space probes over the region between the earth's orbit and the asteroidal belt. The short-lived activity is produced while the meteorite is in the vicinity of the earth's orbit, while the long-lived activity is produced over the entire orbit of the meteorite. The measurement was performed on the chondrite that fell at Hamlet, Ind., on 13 October 1959. The 35-day argon-37 and the 325-year argon-39 activities wore observed in the meteorite. The relative amounts of these activities are compared with the production rates of these isotopes derived from bombarding a sample of the meteorite with 3-GeV protons. It was concluded that the cosmic-ray flux within the limits of error is the same in the asteroidal belt as it is near the earth's orbit. (author) [French] Les auteurs ont essaye de controler la constance spatiale des rayonnements cosmiques de grande energie a l'interieur du systeme solaire en mesurant la radioactivite - induite par les rayons cosmiques - d'un element de courte periode et d'un element de longue periode dans une meteorite recemment tombee. Ce controle est fonde sur le fait que les meteorites ont des orbites tres excentriques et jouent par consequent le role de sondes spatiales dans la region situee entre l'orbite de la terre et la zone des asteroides. L'activite de courte periode est produite pendant que la meteorite est a proximite de l'orbite de la terre tandis que l'activite de longue periode est produite sur toute l'orbite de la meteorite. Les auteurs ont procede a des mesures sur la chondrite Hamlet, qui est tombee le 13 octobre 1959. Ils ont en particulier evalue l

  18. The Combined Use of Autoradiographic and Electron Microscopic Techniques for Studies on Ultra-Thin Sections of Tritium-Labelled Cells of the Intestinal Epithelium; Emploi Combine de l'Autoradiographie et du Microscope Electronique pour L'Etude de Coupes Ultra-Fines de Cellules Tritiees de l'Epithelium Intestinal; 0421 043e 0432 043c 0435 0414 ; Empleo Combinado de Tecnicas de Autorradiografia y de MicroscopiA Electronica para Estudiar Cortes Ultrafinos de Celulas Tritiadas del Epitelio Intestinal

    Energy Technology Data Exchange (ETDEWEB)

    Hampton, J. C. [Division of Experimental Biology, Baylor University College of Medicine, TX (United States); Quastler, H. [Brookhaven National Laboratory, Upton, Long Island, NY (United States)

    1962-02-15

    The high resolution now obtainable in sectioned cells studied in the electron microscope offers some promise of visualizing some of the intracellular events leading to the synthesis of proteins. The specificity of incorporation of tritiated thymidine into DNA provides a system which can be accurately followed with respect to time and localization within the cell. The work to be reported here demonstrates that it is possible to study ultra-thin sections of labelled cells in the electron microscope, to remove the specimen after suitable electron micrographs have been taken, to apply a coating of emulsion sufficiently thick to obtain an autoradiograph but still thin enough' to permit re-examination of the specimen in the electron microscope and to obtain electron micrographic images of autoradiography of cells previously recorded. The autoradiographic emulsion was applied as follows: a thin film was formed by dipping a small wire loop into liquid emulsion and transferring the film by passing the loop over the mounted specimen which was fixed to the top of a small plastic peg. Adequate control can be achieved by taking a one-half micron section after each ultra-thin section during sectioning, mounting it on a glass slide and applying conventional autoradiographic techniques. Because of the fragile nature of ultra-thin sections, the yield of successful autoradiographs is quite low. In spite of this objection it is expected that with improvements in skill and techniques the method will facilitate a better understanding of vital cell processes. (author) [French] Le haut degre de resolution que l'on peut maintenant obtenir dans l'etude des coupes de cellules au microscope electronique offre quelque possiblite d'observer certains des processus intracellulaires qui menent a la synthese des proteines. Le fait que la thymidine tritiee s'incorpore a l'ADN de facon specifique permet de suivre avec precision le deroulement d'un autre processus dans le temps et leur localisation

  19. DIAGNOSTIC SPECTROSCOPIQUE EN TEMPERATURE ELECTRONIQUE DES PLASMAS PHOTOIONISES

    Directory of Open Access Journals (Sweden)

    A. K Ferouani

    2009-12-01

    Full Text Available In this work, we are interested in the diagnostics in electronic temperature of a plasma purely photoionized, based on the intensity ration of lines emitted by ions helium-like, witch have an atomic number Z relatively small. We considered the three lines corresponding to the transitions starting from the excited levels 1s2l towards the fundamental level 1s2 1S0, like appropriate lines. More precisely, the line of resonance w due to the transition 1s2p 1P1 1s2 1 S0, the line of intercombinaison (x,y 1s2p 3 P2,1 1s2 1 S0 as well as prohibited line z due to the transition 1s2 3 S1 1s2 1 S0. These lines appear clearly in the spectra of astrophysical plasmas. As helium-like ion, we chose two, the oxygen O6+ (Z=8 and neon Ne8+ (Z=10. We carried out calculations of the ration of lines intensity G=(zxy/w of O6+ and Ne8+ according to the electronic temperature in the range going from 105 to 107 K. We will see that, like it was shown by Gabriel and Jordan in 1969, this intensity ration can be very sensitive to the temperature electronic and practically independent of the electronic density. Consequently, the ration G can be used to determine in a reliable way the electronic temperature of plasma observed.

  20. Electronic structure of the actinides and their dioxides. Application to the defect formation energy and krypton solubility in uranium dioxide; Etude de la structure electronique des actinides et de leurs dioxydes. Application aux defauts ponctuels et aux gaz de fission dans le dioxyde d`uranium

    Energy Technology Data Exchange (ETDEWEB)

    Petit, T. [CEA Centre d`Etudes Nucleaires de Grenoble, 38 (France)]|[CEA Centre d`Etudes de Grenoble, 38 (France). Dept. de Thermohydraulique et de Physique

    1996-09-28

    Uranium dioxide is the standard nuclear fuel used in French h power plants. During irradiation, fission products such as krypton and xenon are created inside fuel pellets. So, gas release could become, at very high burnup, a limiting factor in the reactor exploitation. To study this subject, we have realised calculations using the Density Functional Theory (DFT) into the Local Density Approximation (LDA) and the Atomic Sphere Approximation (ASA). First, we have validated our approach by calculating cohesive properties of thorium, protactinium and uranium metals. The good agreement between our results and experimental values implies that 5f electrons are itinerant. Calculated lattice parameter, cohesive energy and bulk modulus for uranium and thorium dioxides are in very good agreement with experiment. We show that binding between uranium and oxygen atoms is not completely ionic but partially covalent. The question of the electrical conductivity still remains an open problem. We have been able to calculate punctual defect formation energies in uranium dioxide. Accordingly to experimental observations, we find that it is easier to create a defect in the oxygen sublattice than in the uranium sublattice. Finally, we have been able to predict a probable site of krypton atoms in nuclear fuel: the Schottky trio. Experiences of Extended X-ray Absorption Fine structure Spectroscopy (EXAFS) and X-ray Photoelectron Spectroscopy (XPS) on uranium dioxide doped by ionic implantation will help us in the comprehension of the studied phenomena and the interpretation of our calculations. (author). 256 refs.

  1. X-spectrographic method for plutonium detection. Application to contamination measurements in humans; Etude d'une methode de detection du plutonium par spectrographie X. Application a la mesure des contaminations sur l'homme

    Energy Technology Data Exchange (ETDEWEB)

    Trouble, Michel [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    After reviewing the radio-toxicology of plutonium 239 and conventional detection methods using its {alpha}-radiation, the author considers the measurement of the X emission spectrum of plutonium 239 using a proportional counter filled with argon under pressure. This preliminary work leads to the third part of this research involving the detailed study of the possibilities of applying thin alkali halide crystal scintillators to the detection of soft plutonium X-rays; there follows a systematic study of all the parameters liable to render the detection as sensitive as possible: movement due to the photomultiplier itself and its accessory electronic equipment, nature and size of the crystal scintillator as well as its mode of preparation, shielding against external parasitic radiation. Examples of some applications to the measurement of contamination in humans give an idea of the sensitivity of this method. (author) [French] Apres un apercu de la radiotoxicologie du plutonium 239 et des methodes classiques de detection par son rayonnement {alpha}, on etudie le spectre d'emission X du plutonium 239 avec un compteur proportionnel rempli avec de l'argon sous pression. Ce travail preliminaire permet d'aborder la troisieme partie de cette etude dans laquelle nous examinons d'une fagon approfondie les possibilites d'application des cristaux scintillateurs minces d'halogenure alcalin a la detection du rayonnement X mou du plutonium; suit une etude systematique de tous les parametres susceptibles de rendre la detection aussi sensible que possible: mouvement propre du photomultiplicateur et de l'electronique associee, nature et dimensions du cristal scintillateur ainsi que son mode de fabrication, blindage contre les rayonnements parasites exterieurs. Quelques applications a la mesure des contaminations sur l'homme permettent d'apprecier la sensibilite de cette methode. (auteur)

  2. Application of general methods for the study of porous materials to the determination of the characteristics of barriers; Application des methodes generales d'etudes des corps poreux a la determination des caracteristiques des barrieres

    Energy Technology Data Exchange (ETDEWEB)

    Plurien, P; Charpin, J; Mommejac, S [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Barriers foreseen for the separation of uranium isotopes by gaseous diffusion must posses pores of about 100 Angstrom radius and as high an output as possible. They should thus be of small but uniform thickness. In view of these conditions it is necessary to adapt the normal methods available for studying porous materials in order to check the characteristics of the prototypes examined. It has been found that only by cross-comparison of data from various methods can progress in the development of different prototypes be followed. The following account consists of two parts: 1) A review of the main experimental methods we have used: a) various absorption methods, b) electron microscopy, c) X-ray studies, d) mercury porosimetry, e) liquid permeability, f) gas permeability, g) measurement of separation efficiency. 2) Comparison of the results obtained using these various methods and their application with a view to acquiring as complete a knowledge as possible of the structure of the barrier. (author) [French] Les barrieres susceptibles d'etre utilisees pour la separation des isotopes de l'uranium, par diffusion gazeuse, doivent presenter des pores de rayon de l'ordre de 100 Angstrom et un debit aussi grand que possible. Elles doivent donc avoir une epaisseur faible et constante. Ces conditions necessitent une adaptation des methodes usuelles d'etude des corps poreux pour controler les caracteristiques des prototypes etudies. Il est apparu que seul le recoupement entre diverses methodes permet de suivre les progres dans la realisation de differents prototypes. L'expose qui va suivre comprend deux parties: 1) Une revue des principales methodes experimentales que nous utilisons: a) differentes methodes d'absorption, b) microscopie electronique, c) rayons X, d) porosimetrie a mercure, e) permeabilite aux liquides, f) permeabilite aux gaz, g) mesure de l'efficacite de separation. 2) Comparaison des differents resultats obtenus par ces diverses methodes et leur application

  3. Szilard-Chalmers Processes in Ammonium Dihydrogen Phosphate as Studied by Electrophoresis and Electron Spin Resonance Techniques; Processus Szilard-Chalmers dans le Phosphate d'Ammonium Biacide Etudies par ELectro- Phorese et Resonance de Spin Electronique; 0418 0417 0423 0427 0414 ; Procesos Szilard-Chalmers en el Fosfato Monoamonico Estudiados por Electroforesis y Resonancia del Spin Electronico

    Energy Technology Data Exchange (ETDEWEB)

    Fenger, J.; Nielsen, S. O. [Danish AEC Research Establishment, Riso (Denmark)

    1965-04-15

    'un cristal expose a des neutrons. En vue de caracteriser et d'identifier ces defauts par la resonance de spin electronique (RSE), les auteurs donnent les resultats d'une etude qu'ils ont faite, a l'aide d'une methode fondee sur l'electrophorese et la RSE, sur des monocristaux de phosphate d'ammonium biacide apres exposition aux neutrons dans une colonne thermique a des temperatures de -196 Degree-Sign C a 40 Degree-Sign C. Les spectres RSE ont ete obtenus a l'aide de monocristaux irradies de ND{sub 4}D{sub 2}PO{sub 4}. On a decouvert quatre systemes de raies. Trois de ces systemes, formant la partie exterieure du spectre, se reduisent a des doublets pour certaines orientations du cristal, ce qui laisse supposer un couplage hyperfin avec {sup 31}P. Rien ne prouve jusqu'a present qu'il existe un couplage avec {sup 32}P. La partie centrale du spectre a pu etre egalement obtenue sous l'effet d'une irradiation gamma pure. Un systeme de raies de la partie exterieure du spectre qui avait pour origine des atomes chauds de recul provenant de la reaction {sup 14}N(n, p){sup 14}C a ete attribue a des radicaux phosphites qui sont orientes de huit facons differentes dans le reseau cristallin. Les resultats du recuit thermique et du radiorecuit, etudies par electrophorese, font l'objet d'un bref examen critique. La constatation la plus interessante a ete le fait que ND{sub 4}D{sub 2}PO{sub 4} et NH{sub 4}H{sub 2}PO{sub 4} exposes aux neutrons a 4 Degree-Sign C, -78 Degree-Sign C et -196 Degree-Sign C different par la retention qui est d'environ 50% plus elevee pour ND{sub 4}D{sub 2}PO{sub 4} a ces trois temperatures. (author) [Spanish] Se poseen escasos datos directos sobre los efectos producidos en los fosfatos cristalinos por los atomos calientes de retroceso, resultantes de la reaccion nuclear {sup 31}p (n, {gamma}){sup 32}p, aunque se dispone de amplia informacion sobre el estado del {sup 32}P despues de la disolucion de los cristales irradiados con neutrones. Los autores procuran

  4. Gamma Camera with Image Amplifier: Application in Nuclear Medicine; Camera Gamma a Amplificateur d'Image: Application en Medecine Nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Kellershohn, C.; Vernejoul, P. de; Desgrez, A. [CEA, Service Hospitalier Frederic Joliot, Orsay (France); Lequais, J.; Roux, G.; Lansiart, A. [CEA, Centre d' Etudes Nucleaires de Saclay, Gif-Sur-Yvette (France)

    1969-05-15

    cardiac haemodynamics as well as pulmonary ventilation. (author) [French] La camera decrite comprend une optique constituee par une grille de plomb collimatrice a 649 canaux cylindriques de 130 mm de longueur et 5,5 mm de diametre, un detecteur constitue par une mosaieque de 700 cristaux de Nal(Tl) d'un diametre utile de 5, 5 mm et d'une longueur de 20 mm avec une distance entre les axes de 7,5 mm, et un dispositif d'amplification de lumiere constitue par un premier amplificateur d'image n Ring-Operator 9463 de la Compagnie francaise Thomson-Houston dont la photocathode est en contact optique avec le detecteur et qui est lui-meme couple optiquement a un deuxieme amplificateur a grand gain de lumiere P829A de English Electric Valve. Suivant un principe expose pour la premiere fois durant la precedente conference organisee par l'Agence internationale de l'energie atomique sur l'exploration medicale (scanning) ce deuxieme amplificateur peut etre egalement utilise comme un obturateur electronique dont l'ouverture est commandee par un photomultiplicateur selectionnant la lumiere ayant pour origine la source radioactive examinee. Ce dispositif elimine tres efficacement le bruit de fond du premier tube amplificateur. Sur le plan des applications la camera est utilisee sous deux regimes de fonctionnement: d'une part,en mettant en jeu le dispositif d'obturation electronique dont la cadence d'ouverture et de fermeture peut atteindre 10 kHz, le bruit de fond est pratiquement elimine et il est possible de realiser avec des doses traceuses de radioelements conventionnels des images d'organes tels que la thyroiede, le foie, le rein, etc. en des temps de pose tres courts par rapport a la scintigraphie habituelle; d'autre part,en utilisant des radioelements a demi-vie effective tres courte a de tres hautes activites, de l'ordre de plusieurs millicuries Inverted-Question-Mark il n'est plus necessaire de mettre en jeu la suppression du bruit de fond et sa frequence de repetition limitee a

  5. Blocage de Coulomb dans une boite quantique laterale contenant un faible nombre d'electrons

    Science.gov (United States)

    Gould, Charles

    Dans ce travail on utilise une nouvelle geometrie pour augmenter le controle sur le nombre d'electrons contenus dans une boite quantique laterale, et ainsi atteindre un regime de petit nombre d'electrons. Ces echantillons permettent une etude du blocage de Coulomb quand les electrons sont injectes a partir d'un gaz electronique a deux dimensions (2DEG). Les mesures a faible champ magnetique demontrent la grande flexibilite des echantillons et montrent que l'on peut faire varier le nombre d'electrons dans une boite quantique a partir de plus de 40 electrons jusqu'a un seul electron, ce qui est assez courant dans les boites quantiques verticales, mais ce qui n'avait jamais ete reussi dans une boite quantique laterale. Nos resultats montrent egalement que dans les boites quantiques laterales il est possible de determiner le spin du niveau qui participe au transport a l'aide du phenomene de blocage de spin. De plus, dans certaines circonstances il est meme possible de determiner le spin total de la boite quantique, ce qui peut avoir des applications pratiques dans des domaines tels l'informatique quantique. Les mesures dans le regime de renversement de spin a un champ magnetique plus eleve montrent l'importance des correlations electrons---electrons dans ces boites quantiques, qui menent a des depolarisations et a des structures de spins qui ont un effet sur le transport. En particulier, ces correlations menent a l'existence de niveaux excites de basse energie qui causent une dependance anormale de l'amplitude des pics de blocage de Coulomb en fonction de la temperature. Nos experiences demontrent egalement la possibilite d'utiliser ces boites quantiques comme sondes pour etudier les proprietes du bord d'un 2DEG. Une voie de recherche a etre exploree.

  6. Application of the similitude principle to gamma-gamma density measurements; Application du principe de similitude a la mesure gamma-gamma de densite

    Energy Technology Data Exchange (ETDEWEB)

    Czubek, J A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires. Departement d' Electronique Generale, Service d' Electronique Industrielle; Institut de Recherches Nucleaires, Dep. VI, Cracow (Poland)

    1966-07-01

    The work presented here deals with the problem of the application of the similitude principle to rock density measurements by the gamma-gamma method. A formula is presented which makes it possible to transform results of gamma-gamma measurements carried out on models in order to make them suitable for comparison with results obtained under actual field conditions. Both the space coordinates and the densities are transformed. This transformation makes it possible to obtain a calibration curve as a function of the density for a gamma-gamma probe using only a single model of given density. The influence has also been studied of the chemical composition on the results obtained from gamma-gamma measurements. A method has been developed for estimating the equivalent Z parameter of the medium; the possibility of completely eliminating the influence of the chemical composition of the medium on the measurement results has been studied. (author) [French] L'etude presentee ci-dessous traite le probleme de l'application du principe de similitude aux mesures de densite des roches par la methode gamma-gamma. Nous indiquons une formule qui permet de transformer les resultats des mesures gamma-gamma effectuees sur les modeles pour les comparer aux resultats obtenus dans les conditions reelles sur le terrain. On transforme les coordonnees spatiales ainsi que les densites. Cette transformation donne la possibilite d'obtenir une courbe d'etalonnage (en fonction de la densite) pour une sonde gamma-gamma en utilisant un seul modele de densite donnee. On a etudie aussi l'influence de la composition chimique sur les resultats obtenus des mesures gamma-gamma. On a etabli une methode d'estimation du parametre Z equivalent du milieu, ainsi que la possibilite d'eliminer completement l'influence de la composition chimique du milieu sur les resultats des mesures de densite. (auteur)

  7. A spectrometer using semi-conductor detectors; study and applications (1963); Spectrometre utilisant les detecteurs a semi-conducteur: etudes et applications (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Roux, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    The low average energy, 2.5 to 3.5 eV, required to produce one hole-electron pair in a semiconductor allows an accurate measurement of the energy of the ionizing particles. A high resolution spectrometer has been built using semiconductor detectors. The limit of resolution, due to electronics associated to the detector, to the detector itself and to the source of particles is studied here. The present practical limit of resolution of the spectrometer is 1700 elementary electric charges (full width at half maximum of a ray of a spectrum) or 6 keV in terms of energy lost by a particle in a silicon detector. The physical resolution usually obtained is 20 keV (0.33 per cent) with {alpha} particles of the {sup 212}Bi (6.087 MeV). It depends a lot of the kind of detector used. Some results, concerning the background of the detectors and limit of measurements for low energies are given. Various applications are presented: spectrometry {beta}, spectrometry {gamma} and X, spectrometry of mixtures of {alpha} radioactive elements, collection of {alpha} spectra. (author) [French] La faible energie moyenne, 2,5 a 3,5 eV, necessaire pour produire une paire electron-trou dans un semi-conducteur, permet une mesure precise de l'energie des particules ionisantes. Un spectrometre a haute resolution a ete construit utilisant des detecteurs a semi-conducteur. La limitation en resolution due a l'electronique associee au detecteur, au detecteur lui-meme et a la source de particules, est etudiee. La resolution pratique limite actuelle du spectrometre est 1700 charges electriques elementaires (largeur a mi-hauteur d'une raie de spectre) ou 6 keV exprimee en energie perdue par une particule dans un detecteur au silicium. La resolution physique couramment obtenue est de 20 keV (0,33 pour cent) pour les particules {alpha} du bismuth 212 (6,087 MeV). Elle depend beaucoup du detecteur utilise. Quelques resultats sont donnes concernant le mouvement propre des detecteurs et la limitation des

  8. Study of the potential of using geocooling of an installation with vertical geothermal probes applied to an administrative building in Chiasso - final report; Etude du potentiel d'utilisation de 'geocooling' d'une installation avec sondes geothermiques verticales applique a un batiment administratif 'Minergie' a Chiasso - Rapport final

    Energy Technology Data Exchange (ETDEWEB)

    Pahud, D.; Caputo, P.; Branca, G.; Generelli, M.

    2008-12-15

    The new office building of Brogeda-Chiasso Swiss custom has been built to satisfy the 'Minergie' standard. Low energy requirements for heating and cooling make it possible to use active concrete plates for thermal energy emission (they are called TABS in German). Further, there are ideal conditions for the integration of a geothermal system based on geocooling: a borehole heat exchanger field is coupled to a heat pump in winter and to the cooling distribution through a flat plate heat exchanger in summer. The building has been considered as a reference case in the framework of a study about geocooling applications. A dynamic system model has been developed to simulate the building, the emission of thermal energy, the technical installation and the thermal interactions between them. The simulation tool, called COOLSIM, has been developed using TRNSYS and benefits of developments and validations performed with previous simulation tools such as PILESIM2 and BRIDGESIM. A procedure has been defined to assess the technical feasibility of a system based on geocooling and to establish its sizing. A sensitivity study has been performed to assess and show the influences of the main system parameters on the system sizing. The sizing of the borehole heat exchanger field has been evaluated by determining the total borehole length of the boreholes in relation to the heat pump power and the cooling requirements that have to be met by geocooling. The most influential parameters related to thermal requirements are the heat extraction rate from the boreholes, the temperature level in the geocooling distribution and the ratio between the annual heating and cooling energy requirements. The lowest possible heat power and the highest possible temperature have to be identified. It is important to have a large enough temperature difference between the initial ground temperature and the forward fluid temperature in the cooling distribution. The annual cooling energy transferred

  9. Study of the potential of using geocooling of an installation with vertical geothermal probes applied to an administrative building in Chiasso - final report; Etude du potentiel d'utilisation de 'geocooling' d'une installation avec sondes geothermiques verticales applique a un batiment administratif 'Minergie' a Chiasso - Rapport final

    Energy Technology Data Exchange (ETDEWEB)

    Pahud, D.; Caputo, P.; Branca, G.; Generelli, M.

    2008-12-15

    The new office building of Brogeda-Chiasso Swiss custom has been built to satisfy the 'Minergie' standard. Low energy requirements for heating and cooling make it possible to use active concrete plates for thermal energy emission (they are called TABS in German). Further, there are ideal conditions for the integration of a geothermal system based on geocooling: a borehole heat exchanger field is coupled to a heat pump in winter and to the cooling distribution through a flat plate heat exchanger in summer. The building has been considered as a reference case in the framework of a study about geocooling applications. A dynamic system model has been developed to simulate the building, the emission of thermal energy, the technical installation and the thermal interactions between them. The simulation tool, called COOLSIM, has been developed using TRNSYS and benefits of developments and validations performed with previous simulation tools such as PILESIM2 and BRIDGESIM. A procedure has been defined to assess the technical feasibility of a system based on geocooling and to establish its sizing. A sensitivity study has been performed to assess and show the influences of the main system parameters on the system sizing. The sizing of the borehole heat exchanger field has been evaluated by determining the total borehole length of the boreholes in relation to the heat pump power and the cooling requirements that have to be met by geocooling. The most influential parameters related to thermal requirements are the heat extraction rate from the boreholes, the temperature level in the geocooling distribution and the ratio between the annual heating and cooling energy requirements. The lowest possible heat power and the highest possible temperature have to be identified. It is important to have a large enough temperature difference between the initial ground temperature and the forward fluid temperature in the cooling distribution. The annual cooling energy transferred by

  10. Making of an electronic interferometer to study emissive properties of field-effect microtips. Diffraction and interferences of slow electrons; Construction d`un interferometre electronique pour l`etude des proprietes emissives de micropointes a effet de champ. Diffraction et interferences d`electrons lents

    Energy Technology Data Exchange (ETDEWEB)

    Py, C

    1993-10-01

    The substitution of hot filaments by field-effect microtips has several advantages in many electronic applications. LETI has already proved the interest of this principle for flat panel displays; many people believe it could also provide novel microwave sources. Moreover, the properties of the emission enable to seek new electron optics applications that were not possible with hot filaments. An interferometry experiment was designed, developed and characterized in order to evaluate the potential of the microtips fabricated in the LETI for such applications. This experiment is composed of a Mollenstedt biprism, of electrostatic lenses and an imaging system composed of deflection plates, a small aperture diaphragm (1 {mu}m) and a channel electron multiplier. Quantum wave effects have been observed, which confirms the good coherence properties of the source. Moreover, this experimental setup enables to better understand the physical phenomenon of the emission of the tips fabricated in the LETI, and to propose some technological improvements for the applications we seek. It is also designed for electron holography applications, and should allow the study of new compact electron optics apparatus taking account of the wave properties of the electrons emitted by microtips. (author). 68 figs. 2 annexes. 41 refs.

  11. ARMAZENAMENTO DE SEMENTES DE IPÊ-AMARELO-DO-BREJO (Handroanthus umbellatus (Sond. Mattos. Bignoniaceae

    Directory of Open Access Journals (Sweden)

    Cibele Chalita Martins

    2014-01-01

    Full Text Available Seed storage under controlled environmental conditions represents one of the most important lines of research to be applied on short-lived forest species as Handroanthus . The present research aimed to identify the most suitable seed storage conditions and longevity behavior of Handroanthus umbellatus seeds subject to the following storage treatments: packaging permeable paper bags under a no-controlled laboratory temperature and humidity (control and multiwall semipermeable bag at temperatures of -18 ºC, 1 ºC and 25 ºC. Seeds were dried to 6.3% of water content. Stored seeds were evaluated every three months until 24 months for water content, germination percentage and vigor utilizing first counting test. Seeds of T. umbellata are orthodox, with low longevity under natural conditions, once they remain viable for less than 5 months. The best conditions of seed preservation of these species were obtained by storage at -18° C in multiwall bags. Under these conditions physiological seed quality remains unchanged for a 24-month period.

  12. UHF RiverSonde Observations of Water Surface Velocity at Threemile Slough, California

    National Research Council Canada - National Science Library

    Teague, Calvin C; Barrick, Donald E; Lilleboe, Peter M; Cheng, Ralph T; Ruhl, Catherine A

    2005-01-01

    .... The velocity is measured every 15 minutes by an ultrasonic velocity meter (UVM) which determines the water velocity from two-way acoustic propagation time-difference measurements made across the channel...

  13. Seston Data from Flow Cytometers and Microscope Environmental Data from Sondes

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Seston data with phytoplankton and size fractioned non-living particles counted by flow cytomter from Penebscot River, Maine in April, May, and June of 2015. High...

  14. The link between ozone and temperature as derived from sonde measurements

    Energy Technology Data Exchange (ETDEWEB)

    Fortuin, J P.F. [Royal Netherlands Meteorological Inst., De Bilt (Netherlands)

    1996-12-31

    The current study is based on ozone and temperature measurements, recorded at 8 ozonesonde stations over the period 1971 -1991. The ozonesonde and raw instruments are attached to the same balloon, which has the advantage that datasets are truly synoptic. The ozonesonde stations are located in Canada (Resolute, Edmonton, Churchill and Goose Bay), Japan (Sapporo, Tateno and Kagoshima U.S.) (Wallops Island). The ozone and temperature datasets are submitted to a multiple linear regression analysis. The predictors are time cycle, solar flux at 10.7 cm, quasi-biennial oscillation (equatorial wind at 30 hPa where available), the wind direction recorded during the same balloon flight. To account possible changes in ozonesonde instruments, a step function is used. The El Chichon volcanic eruption is accounted for using the 9-season window technique. Results are presented for the warm and cold half year periods of the annual cycle

  15. Efektifitas sinar ultraviolet terhadap cemaran bakteri patogen pada makanan cair sonde untuk pasien immune-compremissed

    Directory of Open Access Journals (Sweden)

    Ni Luh Sulatri

    2017-06-01

    Full Text Available Background : Food safety remained as critical concern to immune-compremissed patient. Food safety assurance can be achieved through inhibition of pathogenic bacteria by physical treatment such as UV light radiation. However, a study regarding the effect of UV light on growth of pathogenic bacteria in contaminated liquid food are scarce. Objective : To determine the effectiveness of UV light on contamination of pathogenic bacteria in liquid food for immune-compremissed patient. Methods : Randomized design with two factor which were holding time for 60 and 120 minutes and radiation exposure (0, 5, 10 and 15 minutes. The data was analyzed using ANOVA Result : The viscosity and pH of liquid foods were 20 centipoise and 7,15 respectively. Radiation of UV light on contaminated food that have been incubated for 60 and 120 minutes at 37oC showed significant increase (1-2 log cycle on growth of pathogenic bacteria. Conclusion : Radiation of UV light on contaminated liquid food were not effective to inhibit or kill pathogenic bacteria during holding time (60 and 120 minutes.

  16. Resistance probe for liquid hydrogen; Sonde a resistance pour l'hydrogene liquide

    Energy Technology Data Exchange (ETDEWEB)

    Beauval, J J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    A simple device for determining the level of a liquid in equilibrium with its vapour is described. It makes use of the variation in heat exchange between a filament heated by a current and the atmosphere, on passing from the liquid to the gas. This apparatus is used to measure liquid hydrogen levels in liquefying dewar vessels. (author) [French] On decrit un dispositif simple permettant de determiner le niveau d'un liquide en equilibre avec sa vapeur. Il utilise la variation de l'echange thermique entre un filament chauffe par un courant et le milieu ambiant, quand on passe du liquide au gaz. Cet appareil est utilise pour mesurer des niveaux d'hydrogene liquide dans les dewars du liquefacteur. (auteur)

  17. The link between ozone and temperature as derived from sonde measurements

    Energy Technology Data Exchange (ETDEWEB)

    Fortuin, J.P.F. [Royal Netherlands Meteorological Inst., De Bilt (Netherlands)

    1995-12-31

    The current study is based on ozone and temperature measurements, recorded at 8 ozonesonde stations over the period 1971 -1991. The ozonesonde and raw instruments are attached to the same balloon, which has the advantage that datasets are truly synoptic. The ozonesonde stations are located in Canada (Resolute, Edmonton, Churchill and Goose Bay), Japan (Sapporo, Tateno and Kagoshima U.S.) (Wallops Island). The ozone and temperature datasets are submitted to a multiple linear regression analysis. The predictors are time cycle, solar flux at 10.7 cm, quasi-biennial oscillation (equatorial wind at 30 hPa where available), the wind direction recorded during the same balloon flight. To account possible changes in ozonesonde instruments, a step function is used. The El Chichon volcanic eruption is accounted for using the 9-season window technique. Results are presented for the warm and cold half year periods of the annual cycle

  18. Semi-conducting plastics for disposable electronic devices - What are the organic semi-conductors arriving on the market?; Des plastiques semi-conducteurs pour l'electronique jetable. Qui sont les semi-conducteurs organiques qui arrivent sur le marche?

    Energy Technology Data Exchange (ETDEWEB)

    Nueesch, F. A. [EMPA, Duebendorf (Switzerland)

    2010-07-01

    This is a popularization article that describes basic properties of semi-conductors and reports on the status of research and development of organic semi-conductors. In a first part, fundamentals of semi-conductors are recalled. Comparisons are made between inorganic and organic (i.e. based on carbon polymers) compounds. Indications are given on how semi-conducting polymers are obtained. Potential applications are listed: flexible organic solar cells, light emitting diodes, flexible organic displays, intelligent cards for ticketing, etc. Research on organic semi-conductors is of great interest for industry, worldwide, and several companies are widely investing in this area.

  19. Contribution to the electrothermal simulation in power electronics. Development of a simulation methodology applied to switching circuits under variable operating conditions; Contribution a la simulation electrothermique en electronique de puissance. Developpement d`une methode de simulation pour circuits de commutation soumis a des commandes variables

    Energy Technology Data Exchange (ETDEWEB)

    Vales, P.

    1997-03-19

    In modern hybrid or monolithic integrated power circuits, electrothermal effects can no longer be ignored. A methodology is proposed in order to simulate electrothermal effects in power circuits, with a significant reduction of the computation time while taking into account electrical and thermal time constants which are usually widely different. A supervising program, written in Fortran, uses system call sequences and manages an interactive dialog between a fast thermal simulator and a general electrical simulator. This explicit coupling process between two specific simulators requires a multi-task operating system. The developed software allows for the prediction of the electrothermal power dissipation drift in the active areas of components, and the prediction of thermally-induced coupling effects between adjacent components. An application to the study of hard switching circuits working under variable operating conditions is presented

  20. A study of an optimal technological solution for the electronics of particle position sensitive gas detectors (multiwire proportional chambers); Etude d`une solution technologique optimale pour l`electronique de localisation des particules avec des detecteurs a gaz (chambre proportionelle multifils)

    Energy Technology Data Exchange (ETDEWEB)

    Zojceski, Z. [Institut de Physique Nucleaire, CNRS - IN2P3 Universite Paris Sud, 91406 Orsay Cedex (France)

    1997-12-31

    This work aims at optimizing the electronics for position sensitive gas detectors. The first part is a review of proportional chamber operation principles and presents the different possibilities for the architecture of the electronics. The second part involves electronic signal processing for best signal-to-noise ratio. We present a time-variant filter based on a second order base line restorer.It allows a simple pole-zero and tail cancellation at high counting rates. Also, various interpolating algorithms for cathode strip chambers have been studied. The last part reports the development of a complete electronic system, from the preamplifiers up to the readout and control interface, for the cathode strip chambers in the focal plane of the BBS Spectrometer at KVI, Holland. The system is based on application specific D-size VXI modules. In all modules, the 16-bit ADCs and FIFO memory are followed by a Digital Signal Processor, which performs data filtering and cathode induced charge interpolation. Very good analog noise performance is obtained in a multi-processor environment. (author). 127 refs.

  1. A study of an optimal technological solution for the electronics of particle position sensitive gas detectors (multiwire proportional chambers); Etude d`une solution technologique optimale pour l`electronique de localisation des particules avec des detecteurs a gaz (chambre proportionelle multifils)

    Energy Technology Data Exchange (ETDEWEB)

    Zojceski, Z [Institut de Physique Nucleaire, CNRS - IN2P3 Universite Paris Sud, 91406 Orsay Cedex (France)

    1998-12-31

    This work aims at optimizing the electronics for position sensitive gas detectors. The first part is a review of proportional chamber operation principles and presents the different possibilities for the architecture of the electronics. The second part involves electronic signal processing for best signal-to-noise ratio. We present a time-variant filter based on a second order base line restorer.It allows a simple pole-zero and tail cancellation at high counting rates. Also, various interpolating algorithms for cathode strip chambers have been studied. The last part reports the development of a complete electronic system, from the preamplifiers up to the readout and control interface, for the cathode strip chambers in the focal plane of the BBS Spectrometer at KVI, Holland. The system is based on application specific D-size VXI modules. In all modules, the 16-bit ADCs and FIFO memory are followed by a Digital Signal Processor, which performs data filtering and cathode induced charge interpolation. Very good analog noise performance is obtained in a multi-processor environment. (author). 127 refs.

  2. Abstracts and electronic proceedings of the Canadian Dam Association's 2009 annual conference : protecting people, property and the environment; Resumes et actes electroniques du congres annuel 2009 de l'Association canadienne des barrages : proteger les personnes, les biens et l'environnement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    The Canadian Dam Association (CDA) is the Canadian leader in advancing knowledge and practices related to dams. This annual conference provided a professional development opportunity on a broad range of dam-related topics. The technical sessions addressed issues such as adaptation to climate change; the application of safety design for discharge facilities; risks associated with rockfill dams; underlying problems of design floods and dam safety; guidelines for public safety around dams and psychology of safety; the dam safety review process; and run-of-river hydro dams. During the related sessions, Canadian members of the International Committee on Large Dams (ICOLD) commented on international practice and developments. The workshops focused on incident investigations; reliability-centered maintenance; flow discharge gate reliability; piping damage to till core dams; and mining dams. The sessions of the conference were entitled: design floods and dam safety; dam breach flood modelling; dam safety management; public safety; mining dams; flood handling and modelling; case studies; ice loads on structures; seepage control; dam safety reviews and remediation; remote sensing for dams; protecting the environment; seismic hazard and response modelling; and the performance of dams in 2008 earthquake in Sichuan, China. The conference featured 61 presentations, of which 59 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  3. Scanning electron microscopy and X-ray photoelectron studies of high temperature oxidation mechanism of a Fe-Cr-Al alloy; Etude par microscopie electronique a balayage et spectroscopie de photoelectrons des mecanismes d'oxydation a haute temperature d'un alliage Fe-Cr-Al

    Energy Technology Data Exchange (ETDEWEB)

    Delaunay, F.; Berthier, C.; Lameille, J.M. [CEA Saclay, Dept. d' Entreposage et de Stockage des Dechets (DCC/DPE/SPCP), 91 - Gif-sur-Yvette (France)

    2000-07-01

    The lifetime of high temperature materials is strongly dependent on their resistance to high temperature oxidation. Hence the technical applications of these materials require the formation of a protective, slow growing oxide scale. The efficiency of Cr{sub 2}O{sub 3}- forming alloys above 1100 deg C is limited because Cr{sub 2}O{sub 3} reacts with oxygen to form volatile CrO{sub 3}. It is known that doping alloys with small additions (< 0.1 wt %) can improve mechanical properties and/or alloy oxidation resistance. Fe{sub 20}Cr{sub 5}Al based alloys form protective scale of alumina with slow growth rates at temperatures above 1000 deg C. The alloy composition is given in Table 1. Various techniques have been used to determine the scale morphology, structure and composition of oxide scale, including Scanning Electron Microscopy coupled with Energy Dispersive X-ray Spectrometry, grazing incidence X-ray diffraction, and XPS. During heat treatment at 1150 C, ranging from 5 minutes to 24 hours, a parabolic regime is observed, leading to a protective layer against oxidation. The oxide scale structure mainly consists of thermodynamically stable {alpha}-Al{sub 2}O{sub 3}. After 1 hour, (Mg{sub 1-X}Fe{sub X})Al{sub 2}O{sub 4} appears and increases with treatment time. After 5 minutes at 1150 deg C, X ray maps indicating the location of the elements in the oxide scale were prepared with SEM-EDS. Figure 2 shows that the oxide scale mainly consists of alumina. The secondary electron image shows little islands consisting of yttrium and zirconium on the oxide scale. For longer oxidation time, I hour, XPS results reveal chemical species like Al{sub 2}O{sub 3}),Ti(IV) (TiO{sub 2}), Cr(III) that yttrium and zirconium are not detected. After 24 hours, scale thickness is about 2 {mu}m. Small islands of yttrium and zirconium (and to a lesser degree titanium) are still present. In Figure 4, magnesium and titanium are located on the alumina scale. X-ray maps on cross-sections in Figure

  4. Electronic Warfare Test and Evaluation (Essai et evaluation en matiere de guerre electronique)

    Science.gov (United States)

    2012-12-01

    temperature measurements in a beam dump , converting it into a calorimeter. T&E OF EA SYSTEMS 3 - 40 RTO-AG-300-V28 Common laboratory and...simulation. Aircraft and other services • Cooling, hydraulics , pressurised air, ground power for aircraft; • Fire suppression, control room, CCTV...instrumentation, two man-rated hoists , a turntable, interconnecting networks, a test control room, presentation rooms, and office space, and a small

  5. Electronic de-multipliers II (ring-shape systems); Demultiplieurs electroniques II (systeme en anneau)

    Energy Technology Data Exchange (ETDEWEB)

    Raievski, V

    1948-09-01

    This report describes a new type of ring-shape fast electronic counter (de-multiplier) with a resolution capacity equivalent to the one made by Regener (Rev. of Scientific Instruments USA 1946, 17, 180-89) but requiring two-times less electronic valves. This report follows the general description of electronic de-multipliers made by J. Ailloud (CEA--001). The ring comprises 5 flip-flop circuits with two valves each. The different elements of the ring are calculated with enough details to allow the transfer of this calculation to different valve types. (J.S.)

  6. Conception et Réalisation d'une Toupie Electronique Pour la ...

    African Journals Online (AJOL)

    Verification of exposure time with Spinning Manual takes place on a single phase generator X-rays; the spinning top is for Motorized generators powered polyphase. In addition to these two restrictions are other disadvantages such as the timing of irradiation with the speed of rotation of the Spinning-Top or the need for ...

  7. Electromagnetic compatibility design and cabling system rules; Regles de conception et de cablage des systemes electroniques

    Energy Technology Data Exchange (ETDEWEB)

    Raimbourg, J.

    2009-07-01

    This report is devoted to establish EMC (Electromagnetic Compatibility) design and cabling system rules. It is intended for hardware designers in charge of designing electronic maps or integrating existing materials into a comprehensive system. It is a practical guide. The rules described in this document do not require enhanced knowledge of advanced mathematical or physical concepts. The key point is to understand phenomena with a pragmatic approach to highlight the design and protection rules. (author)

  8. Project for an analogue divider using electronic counting; Projet de diviseur analogique par comptage electronique

    Energy Technology Data Exchange (ETDEWEB)

    Novat, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The apparatus which has been developed is designed to give the reciprocal of a number between 10{sup 3} and 10{sup 7}. In practice this number can be the pulse count provided during a given time by a detector of the BF{sub 3} type during a criticality experiment. The apparatus is made up of two parts: one provides, by means of relays, a voltage proportional to the reciprocal required, the other is a numeric voltmeter measuring this voltage between 0.1 and 1 volt. The relative error of the result is under 5 per cent. (author) [French] L'appareillage etudie et realise, est destine a fournir l'inverse d'un nombre compris entre 10{sup 3} et 10{sup 7}. En pratique ce nombre est le taux d'impulsions delivrees pendant un temps donne, par un detecteur du type BF{sub 3}, au cours d'une manipulation de criticalite. L'appareillage est compose de deux parties: l'une fournit a l'aide de relais une tension proportionnelle a l'inverse cherche, l'autre est un voltmetre numerique mesurant cette tension comprise entre 0,1 et 1 Volt, L'erreur relative sur le resultat est inferieure a 5%. (auteur)

  9. Application of a powder sintering-extrusion process to the fabrication of U-Al and UO{sub 2}-stainless steel dispersed fuel elements; Application de frittage-filage de poudres a la fabrication d'elements combustibles disperses U-Al et UO{sub 2} inox

    Energy Technology Data Exchange (ETDEWEB)

    Meny, L.; Buffet, J.; Sauve, Ch.

    1962-07-01

    Within the scope of an investigation of dispersion-type fuel elements, the fabrication by extrusion and sintering of cladded bars and tubes with core of either uranium-aluminum or uranium oxide-stainless steel fuel was investigated. The powder mixtures are first pre-densified in a 'pot', whereupon the sheathed compact is degassed and sealed in a vacuum by electron-beam welding. The subsequent co-extrusion is performed at low temperature and with slow pressure application in the case of U-Al dispersions; and at high temperature with rapid pressure application, using the Ugine-Sejournet process, in the case of UO{sub 2}-stainless steel dispersions. The procedure permits the production of practically fully dense bars and tubes more than 1 m. in length and 10-30 mm in diameter, the wall thickness of the tubes ranging from 2-5 mm. The physical and mechanical characteristics of the dispersion, as well as the mechanical characteristics of the cladded elements, were investigated as a function of the uranium content and the temperature. (authors) [French] Dans le cadre de l'etude des elements combustibles disperses, nous avons etudie la fabrication par frittage-filage de barreaux et de tubes gaines renfermant un noyau combustible soit en uranium-aluminium, soit en UO{sub 2}-inox. Les melanges de poudres sont comprimes dans un 'pot'. La billette composite ainsi obtenue est degazee, fermee et soudee sous vide par bombardement electronique. Le cofilage est ensuite effectue, a basse temperature et sur presse lente pour les disperses U-Al, a haute temperature et sur presse rapide par le procede Ugine-Sejournet pour les disperses UO{sub 2}-inox. Nous avons ainsi obtenu des barres et des tubes de porosite pratiquement nulle de plus de 1 metre de longueur et de 10 a 30 mm de diametre; les epaisseurs des tubes sont comprises entre 2 et 5 mm. Les proprietes physiques et mecaniques des disperses ainsi que les proprietes mecaniques des ensembles gaines, ont ete etudiees en fonction de

  10. Medical Applications

    OpenAIRE

    Biscari, C.; Falbo, L.

    2016-01-01

    The use of accelerators for medical applications has evolved from initial experimentation to turn-key devices commonly operating in hospitals. New applications are continuously being developed around the world, and the hadrontherapy facilities of the newest generation are placed at the frontier between industrial production and advanced R&D. An introduction to the different medical application accelerators is followed by a description of the hadrontherapy facilities, with special emphasis on ...

  11. LCA Applications

    DEFF Research Database (Denmark)

    Owsianiak, Mikołaj; Bjørn, Anders; Laurent, Alexis

    2018-01-01

    The chapter gives examples of applications of LCA by the central societal actors in government, industry and citizens, and discusses major motivations and challenges for the use of LCA to support science-based decision-making from their respective perspectives. We highlight applications of LCA...... environmental impacts of products and systems and support decisions around production and consumption and highlights factors that prevent its even more widespread application....

  12. PSA applications

    Energy Technology Data Exchange (ETDEWEB)

    Dubreuil Chambardel, A

    1997-12-31

    The IAEA now defines three types of PSA applications: Validation of design and of operation procedures; optimization of plant operation; and regulatory applications. The applications of PSA are manifold: only a few are dealt with here (precursor analysis is dealt with in session 3, topic 4). For each of them, we will do the utmost to demonstrate the main difficulties encountered, EDF`s viewpoint on the matter, and the points remaining to be solved. In what follows, unless explicitly stated otherwise, we have made every effort to represent the different applications as they are practiced by all concerned in the international community, and to describe the inherent difficulties the international community has encountered with these applications with all objectivity. It goes without saying that the comments below are simply those of the ESF department, and are submitted here for discussion by the experts. 13 refs.

  13. PSA applications

    International Nuclear Information System (INIS)

    Dubreuil Chambardel, A.

    1996-01-01

    The IAEA now defines three types of PSA applications: Validation of design and of operation procedures; optimization of plant operation; and regulatory applications. The applications of PSA are manifold: only a few are dealt with here (precursor analysis is dealt with in session 3, topic 4). For each of them, we will do the utmost to demonstrate the main difficulties encountered, EDF's viewpoint on the matter, and the points remaining to be solved. In what follows, unless explicitly stated otherwise, we have made every effort to represent the different applications as they are practiced by all concerned in the international community, and to describe the inherent difficulties the international community has encountered with these applications with all objectivity. It goes without saying that the comments below are simply those of the ESF department, and are submitted here for discussion by the experts. 13 refs

  14. Implementation en VHDl/FPGA d'afficheur video numerique (AVN) pour des applications aerospatiales

    Science.gov (United States)

    Pelletier, Sebastien

    L'objectif de ce projet est de developper un controleur video en langage VHDL afin de remplacer la composante specialisee presentement utilisee chez CMC Electronique. Une recherche approfondie des tendances et de ce qui se fait actuellement dans le domaine des controleurs video est effectuee afin de definir les specifications du systeme. Les techniques d'entreposage et d'affichage des images sont expliquees afin de mener ce projet a terme. Le nouveau controleur est developpe sur une plateforme electronique possedant un FPGA, un port VGA et de la memoire pour emmagasiner les donnees. Il est programmable et prend peu d'espace dans un FPGA, ce qui lui permet de s'inserer dans n'importe quelle nouvelle technologie de masse a faible cout. Il s'adapte rapidement a toutes les resolutions d'affichage puisqu'il est modulaire et configurable. A court terme, ce projet permettra un controle ameliore des specifications et des normes de qualite liees aux contraintes de l'avionique.

  15. Medical Applications

    CERN Document Server

    Biscari, C.

    2014-12-19

    The use of accelerators for medical applications has evolved from initial experimentation to turn-key devices commonly operating in hospitals. New applications are continuously being developed around the world, and the hadrontherapy facilities of the newest generation are placed at the frontier between industrial production and advanced R&D. An introduction to the different medical application accelerators is followed by a description of the hadrontherapy facilities, with special emphasis on CNAO, and the report closes with a brief outlook on the future of this field.

  16. Medical Applications

    International Nuclear Information System (INIS)

    Biscari, C; Falbo, L

    2014-01-01

    The use of accelerators for medical applications has evolved from initial experimentation to turn-key devices commonly operating in hospitals. New applications are continuously being developed around the world, and the hadrontherapy facilities of the newest generation are placed at the frontier between industrial production and advanced R&D. An introduction to the different medical application accelerators is followed by a description of the hadrontherapy facilities, with special emphasis on CNAO, and the report closes with a brief outlook on the future of this field

  17. Superconductivity - applications

    International Nuclear Information System (INIS)

    The paper deals with the following subjects: 1) Electronics and high-frequency technology, 2) Superconductors for energy technology, 3) Superconducting magnets and their applications, 4) Electric machinery, 5) Superconducting cables. (WBU) [de

  18. Photovoltaic applications

    International Nuclear Information System (INIS)

    Sidrach, M.

    1992-01-01

    The most common terrestrial applications of photovoltaic plants are reviewed. Classification of applications can be done considering end-use sectors and load profiles (consumption demand). For those systems with direct coupling the working point is determined by the intersection of the load line with the I-V curve Design guidelines are provided for photovoltaic systems. This lecture focusses on the distribution system and safeguards

  19. Possibility of applying the gamma-gamma method to the in situ determination of uranium-ore densities; Les possibilites d'application de la methode gamma-gamma a la determination en place de la densite des minerais d'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Czubek, J; Guitton, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The principles of the gamma-gamma method are reviewed. It is shown in particular that, under certain conditions, the method makes it possible to obtain a representative measurement of the electronic density. Chemical analyses have been carried out on samples obtained from uranium deposits. The results show that an exact correlation exists between the massive and electronic densities. It is possible to consider the possibility of measuring the density of uranium-containing rocks by the gamma-gamma method. (authors) [French] Les principes de la methode gamma-gamma sont rappeles. En particulier, il est montre que, dans certaines conditions, la methode permet une mesure representative de la densite electronique. Des analyses chimiques ont ete effectuees sur des echantillons provenant de gisements uraniferes. Les resultats indiquent qu'il existe une correlation precise entre leur densite massique et leur densite electronique. Il est possible d'envisager la mesure de la densite des roches uraniferes par la methode gamma-gamma.

  20. Fluorescence Lyman-Alpha Stratospheric Hygrometer (FLASH): application on meteorological balloons, long duration balloons and unmanned aerial vehicles.

    Science.gov (United States)

    Lykov, Alexey; Khaykin, Sergey; Yushkov, Vladimir; Efremov, Denis; Formanyuk, Ivan; Astakhov, Valeriy

    The FLASH instrument is based on the fluorescent method, which uses H2O molecules photodissociation at a wavelength lambda=121.6 nm (Lalpha - hydrogen emission) followed by the measurement of the fluorescence of excited OH radicals. The source of Lyman-alpha radiation is a hydrogen discharge lamp while the detector of OH fluorescence at 308 -316 nm is a photomultiplier run in photon counting mode. The intensity of the fluorescent light as well as the instrument readings is directly proportional to the water vapor mixing ratio under stratospheric conditions with negligible oxygen absorption. Initially designed for rocket-borne application, FLASH has evolved into a light-weight balloon sonde (FLASH-B) for measurements in the upper troposphere and stratosphere on board meteorological and small plastic balloons. This configuration has been used in over 100 soundings at numerous tropical mid-latitude and polar locations within various international field campaigns. An airborne version of FLASH instrument is successfully utilized onboard stratospheric M55-Geophysica aircraft and tropospheric airborne laboratory YAK42-Roshydromet. The hygrometer was modified for application onboard stratospheric long-duration balloons (FLASH-LDB version). This version was successfully used onboard CNES super-pressure balloon launched from SSC Esrange in March 2007 and flown during 10 days. Special design for polar long duration balloon PoGOLite was created for testing work during polar day in June 2013. Installation and measurement peculiarities as well as observational results are presented. Observations of water vapour using FLASH-B instrument, being of high quality are rather costly as the payload recovery is often complicated and most of the time impossible. Following the goal to find a cost-efficient solution, FLASH was adapted for use onboard Unmanned Aerial Vehicles (UAV). This solution was only possible thanks to compactness and light-weight (0.5 kg) of FLASH instrument. The

  1. Catch and Release: A dense, longitudinal array of water quality sondes reveals spatial and temporal complexities in suspended sediment flux

    Science.gov (United States)

    Guilinger, J. J.; Crosby, B. T.

    2017-12-01

    Excessive suspended sediment in streams is one of the most common causes for industrial, ecological and recreational stream impairment in the US. Identifying the primary geomorphic or anthropogenic sources of sediment is a key step in the effective mitigation of impairment. This study seeks to identify sources of suspended sediment in an agriculturally impaired watershed, Marsh Creek, in southeast Idaho. We employ thirteen multi-parameter water quality sensors to simultaneously measure stage, turbidity, temperature and conductivity every 15 minutes over a full calendar year. Examined at both the event and annual scale, these data enable mass balance calculations for mainstem and tributary contributions. Revealed in this monitoring is an approximately eight-fold longitudinal increase in sediment flux over 74 km that is largely augmented by eroding mainstem banks in reaches with higher stream power in the lower 30 km, with less than 20% contributed from tributaries. Independent data confirming the bank source were acquired through cost-effective sediment fingerprinting using 15N and C:N signatures from potential soil endmembers. Additionally, Google Street View-type longitudinal imagery of banks was collected via a kayak survey to confirm the spatial extent and magnitude of bank erosion along Marsh Creek. These data converge on bank erosion as the primary source of fine sediment. Sediment load at various hierarchical temporal and spatial scales is impacted by in-stream storage and remobilization, especially over shorter timescales ranging from daily to seasonal periods. Once averaged over the annual scale, local, temporary in-channel storage is overcome and these data reveal source reaches that can be prioritized for restoration and mitigation projects.

  2. Imagerie de plasmons de surface et d’électrons chauds par thermoréflectance pompe-sonde femtoseconde

    OpenAIRE

    Lozan , Olga

    2015-01-01

    In this work we explored the ultrafast dynamics of photo-excited hot electrons in plasmonic structures. The particular interest of this field resides on the fact surface plasmons (SP), because of their unrivaled temporal and spatial characteristics, provide a technological route for ultrafast information processes at the nanoscale. In this context, this manuscript provides a comprehension and the harnessing of one of the major limitation of the SP-based technologies : absorption losses by Jou...

  3. PRIBIC Application

    International Nuclear Information System (INIS)

    Pascual Alonso, J.L.; Barcala Riveira, J.M.

    2002-01-01

    PRIBIC plant (Pollutants Reduction In small Biomass Combustion systems) at CEDER is a facility specifically designed to do biomass combustion tests. In these tests is necessary to know the values of different sensors in real time. With this information the PRIBIC plant is regulated to its optimum point of work and its possible to follow the operation criteria and get test objectives. Different electronic instruments record information about the plant operation. A software application was developed to let a centralised motorization of that information. The application communicates with the instrumentation, recovers data, lets operators see data in real time and saves the information in files. An important part of this document describes that application, and some considerations to generalise this kind of developments to other Experimental Plants, including cost estimations. Descriptions of plant, analysis of the problem, result evaluations, and conclusions can also be found in the document. (Author) 13 refs

  4. Other applications

    International Nuclear Information System (INIS)

    Ligou, J.; Benoist, P.; Boffi, V.; Stenic, B.

    1981-01-01

    This chapter reports about the work done by four groups in Italy, France, Switzerland and Yugoslavia on the new applications of transport theory. Among them problems dealing with controlled thermonuclear reactions and/or fusion devices, nonlinear electric conductivity, atomic and crystal models were discussed

  5. The study by means of a photomultiplier of the scintillations produced by {alpha} particles striking a zinc sulphide screen; Etude, au photomultiplicateur, des scintillations produites par les particules {alpha} dans un ecran de sulfure de zinc. Application a la numeration precise des particules {alpha}

    Energy Technology Data Exchange (ETDEWEB)

    Anthony, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-06-15

    The object of the study is the accurate counting of {alpha} particles by p-m. detection of their scintillations upon impact with a zinc sulphide screen. The main advantage of the method is the extreme simplicity of the electronics used: the possibility of obtaining a utilizable pulse from the p-m. (EMI5311) without any amplification, and in linear response, is demonstrated. The scintillation produced by an impact on Zn-S has also been studied experimentally. The decrease of light intensity in relation to time may be interpreted by the exponential relation: I = I{sub 0} exp (-t / {tau}) whereby {tau} = (39 {+-} 0,1) 10{sup -6} s. The relation between scintillation intensity and remaining trajectory after travel through a given air-space has also been determined. Possible suitable applications of this method of {alpha} counting are those where good stability and low background are necessary. Results stated bear on air contamination studies, isotopic composition variation measurement of uranium, bismuth content measurement in alloys by irradiation of specimens in a thermal neutron flux and {alpha} count on the Po formed. (author) [French] Ce travail est consacre a l'etude de la numeration precise des particules {alpha} par detection au photomultiplicateur des scintillations produites par ces particules dans un ecran de sulfure de zinc. Le principal avantage de cette methode reside dans l'extreme simplicite de l'appareillage electronique; il est en effet montre qu'il est possible, tout en convoyant une reponse lineaire, d'obtenir du photomultiplicateur (EMI5311) un signal electrique utilisable sans aucune amplification. La scintillation produite par l'impact des particules {alpha} sur un ecran de Zn-S est etudiee experimentalement. La decroissance de l'intensite lumineuse en fonction du temps est interpretable par la relation exponentielle I = I{sub 0} exp (-t / {tau}) avec {tau} = (39 {+-} 0,1) 10{sup -6} s. La relation entre l'intensite de la scintillation et le

  6. Application note :

    Energy Technology Data Exchange (ETDEWEB)

    Russo, Thomas V.

    2013-08-01

    The development of the XyceTM Parallel Electronic Simulator has focused entirely on the creation of a fast, scalable simulation tool, and has not included any schematic capture or data visualization tools. This application note will describe how to use the open source schematic capture tool gschem and its associated netlist creation tool gnetlist to create basic circuit designs for Xyce, and how to access advanced features of Xyce that are not directly supported by either gschem or gnetlist.

  7. Photography applications

    Science.gov (United States)

    Cochran, Susan A.; Goodman, James A.; Purkis, Samuel J.; Phinn, Stuart R.

    2013-01-01

    Photographic imaging is the oldest form of remote sensing used in coral reef studies. This chapter briefly explores the history of photography from the 1850s to the present, and delves into its application for coral reef research. The investigation focuses on both photographs collected from low-altitude fixed-wing and rotary aircraft, and those collected from space by astronauts. Different types of classification and analysis techniques are discussed, and several case studies are presented as examples of the broad use of photographs as a tool in coral reef research.

  8. Detector applications

    International Nuclear Information System (INIS)

    Pehl, R.H.

    1977-10-01

    Semiconductor detectors are now applied to a very wide range of problems. The combination of relatively low cost, excellent energy resolution, and simultaneous broad energy-spectrum analysis is uniquely suited to many applications in both basic and applied physics. Alternative techniques, such as magnetic spectrometers for charged-particle spectroscopy, while offering better energy resolution, are bulky, expensive, and usually far more difficult to use. Furthermore, they do not directly provide the broad energy-spectrum measurements easily accomplished using semiconductor detectors. Scintillation detectors, which are approximately equivalent to semiconductor detectors in convenience and cost, exhibit 10 to 100 times worse energy resolution. However, their high efficiency and large potential size recommend their use in some measurements

  9. Connected vehicle applications : environment.

    Science.gov (United States)

    2016-01-01

    The U.S. Department of Transportation has developed a number of connected vehicle environmental applications, including the Applications for the Environment Real-Time Information Synthesis (AERIS) research program applications and road weather applic...

  10. Teleneurology applications

    Science.gov (United States)

    Wechsler, Lawrence R.; Tsao, Jack W.; Levine, Steven R.; Swain-Eng, Rebecca J.; Adams, Robert J.; Demaerschalk, Bart M.; Hess, David C.; Moro, Elena; Schwamm, Lee H.; Steffensen, Steve; Stern, Barney J.; Zuckerman, Steven J.; Bhattacharya, Pratik; Davis, Larry E.; Yurkiewicz, Ilana R.; Alphonso, Aimee L.

    2013-01-01

    Objective: To review current literature on neurology telemedicine and to discuss its application to patient care, neurology practice, military medicine, and current federal policy. Methods: Review of practice models and published literature on primary studies of the efficacy of neurology telemedicine. Results: Teleneurology is of greatest benefit to populations with restricted access to general and subspecialty neurologic care in rural areas, those with limited mobility, and those deployed by the military. Through the use of real-time audio-visual interaction, imaging, and store-and-forward systems, a greater proportion of neurologists are able to meet the demand for specialty care in underserved communities, decrease the response time for acute stroke assessment, and expand the collaboration between primary care physicians, neurologists, and other disciplines. The American Stroke Association has developed a defined policy on teleneurology, and the American Academy of Neurology and federal health care policy are beginning to follow suit. Conclusions: Teleneurology is an effective tool for the rapid evaluation of patients in remote locations requiring neurologic care. These underserved locations include geographically isolated rural areas as well as urban cores with insufficient available neurology specialists. With this technology, neurologists will be better able to meet the burgeoning demand for access to neurologic care in an era of declining availability. An increase in physician awareness and support at the federal and state level is necessary to facilitate expansion of telemedicine into further areas of neurology. PMID:23400317

  11. Electron cyclotron waves transmission: new approach for the characterization of electron distribution functions in Tokamak hot plasmas; La transmission d`ondes cyclotroniques electroniques: une approche nouvelle pour caracteriser les fonctions de distribution electronique des plasmas chauds de Tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Michelot, Y

    1995-10-01

    Fast electrons are one of the basic ingredients of plasma operations in many existing thermonuclear fusion research devices. However, the understanding of fast electrons dynamics during creation and sustainment of the superthermal electrons tail is far for being satisfactory. For this reason, the Electron Cyclotron Transmission (ECT) diagnostic was implemented on Tore Supra tokamak. It consists on a microwave transmission system installed on a vertical chord crossing the plasma center and working in the frequency range 77-109 GHz. Variations of the wave amplitude during the propagation across the plasma may be due to refraction and resonant absorption. For the ECT, the most common manifestation of refraction is a reduction of the received power density with respect to the signal detected in vacuum, due to the spreading and deflection of the wave beam. Wave absorption is observed in the vicinity of the electron cyclotron harmonics and may be due both to thermal plasma and to superthermal electron tails. It has a characteristic frequency dependence due to the relativistic mass variation in the wave-electron resonance condition. This thesis presents the first measurements of: the extraordinary mode optical depth at the third harmonics, the electron temperature from the width of a cyclotron absorption line and the relaxation times of the electron distribution during lower hybrid current drive from the ordinary mode spectral superthermal absorption line at the first harmonic. (J.S.). 175 refs., 110 figs., 9 tabs., 3 annexes.

  12. Study of electronic heat transport in plasma through diagnosis based on modulated electron cyclotron heating; Etudes de transport de la chaleur electronique par injection modulee d'ondes a la frequence cyclotronique electronique

    Energy Technology Data Exchange (ETDEWEB)

    Clemencon, A.; Guivarch, C

    2003-07-01

    In order to make nuclear fusion energetically profitable, it is crucial to heat and confine the plasma efficiently. Studying the behavior of the heat diffusion coefficient is a key issue in this matter. The use of modulated electron cyclotron heating as a diagnostic has suggested the existence of a transport barrier under certain plasma conditions. We have determined the solution to the heat transport equation, for several heat diffusion coefficient profiles. By comparing the analytical solutions with experimental data; we are able to study the heat diffusion coefficient profile. Thus, in certain experiments, we can confirm that the heat diffusion coefficient switches from low to high values at the radius where the electron cyclotron heat deposition is made. (authors)

  13. Molecular and electronic structure of actinide hexa-cyanoferrates; Structure moleculaire et electronique des hexacyanoferrates d'actinides

    Energy Technology Data Exchange (ETDEWEB)

    Bonhoure, I

    2001-07-01

    The goal of this work is to improve our knowledge on the actinide-ligand bond properties. To this end, the hexacyanoferrate entities have been used as pre-organized ligand. We have synthesized, using mild chemistry, the following series of complexes: An{sup IV}[Fe{sup II}(CN){sub 6}].xH{sub 2}O (An = Th, U, Np, Pu); Am{sup III}[Fe{sup III}(CN){sub 6}].xH{sub 2}O; Pu {sup III}[Co{sup III}(CN){sub 6}].xH{sub 2}O and K(H?)An{sup III}[Fe{sup II}(CN){sub 6}].xH{sub 2}O (An = Pu, Am). The metal oxidation states have been obtained thanks to the {nu}{sub CN}, stretching vibration and to the actinide L{sub III} absorption edge studies. As Prussian Blue, the An{sup IV}[Fe{sup II}(CN){sub 6}].xH{sub 2}O (An = Np, Pu) are class II of Robin and Day compounds. X-ray Diffraction has shown besides that these complexes crystallize in the P6{sub 3}/m space group, as the isomorphic LaKFe(CN){sub 6}.4H{sub 2}O complex used as structural model. The EXAFS oscillations at the iron K edge and at the An L{sub III} edge allowed to determine the An-N, An-O, Fe-C and Fe-N distances. The display of the multiple scattering paths for both edges explains the actinide contribution absence at the iron edge, whereas the iron signature is present at the actinide edge. We have shown that the actinide coordination sphere in actinides hexa-cyanoferrates is comparable to the one of lanthanides. However, the actinides typical behavior towards the lanthanides is brought to the fore by the An{sup IV} versus Ln{sup III} ions presence in this family of complexes. Contrarily to the 4f electrons, the 5f electrons influence the electronic properties of the compounds of this family. However, the gap between the An-N and Ln-N distances towards the corresponding metals ionic radii do not show any covalence bond evolution between the actinide and lanthanide series. (author)

  14. Analyse des proprietes electroniques de supraconducteurs a l'aide de la theorie de la fonctionnelle de la densite

    Science.gov (United States)

    Blackburn, Simon

    In this thesis, the electronic structure of different kinds of superconductors is explored with the density functional theory. A brief explanation of this theory is done in the introduction. The Hubbard model is also presented as it can be used to solve shortcomings of the theory in some materials such as cuprates. The blend of the two theories is the DFT+U which is used to describe materials with strongly correlated electrons. Afterward, a paper describing the electron-phonon coupling in the superconductor NbC1- xNx is presented. Results from this work show the role of the Fermi surface in the electron pairing mechanism leading to superconductivity. Based on these results, a model is developed explaining how the critical temperature is influenced by the change in frequency of the vibration modes. Then, quantum oscillation results based on a detailed analysis of Fermi surfaces, allowing a direct comparison with experimental data, are presented within two papers. The first one is about a material in the iron pnictide family, the LaFe2P2. Our calculations show that the Fermi surface of this material is different from the superconducting doped BaFe2As2 which explains why this material shows no sign of superconductivity. The second paper is about the heavy fermion system YbCoIn5. To do this, a new efficient method to calculate de Haas-van Alphen frequencies is developed. Finally, a paper on superconducting YBa2Cu3O6.5 is presented. Using DFT+U, the role of various magnetic orders on the Fermi surface are studied. The results allow a better understanding of the measured quantum oscillations in this material.

  15. Modeling of the response under radiation of electronic dosemeters; Modelisations de la reponse sous rayonnements de dosimetres electroniques

    Energy Technology Data Exchange (ETDEWEB)

    Menard, S. [Institut de Radioprotection et de Surete Nucleaire (IRSN), 92 - Fontenay-aux-Roses (France)

    2003-07-01

    The simulation with with calculation codes the interactions and the transport of primary and secondary radiations in the detectors allows to reduce the number of developed prototypes and the number of experiments under radiation. The simulation makes possible the determination of the response of the instrument for exposure configurations more extended that these ones of references radiations produced in laboratories. The M.C.N.P.X. allows to transport, over the photons, electrons and neutrons, the charged particles heavier than the electrons and to simulate the radiation - matter interactions for a certain number of particles. The present paper aims to present the interest of the use of the M.C.N.P.X. code in the study, research and evaluation phases of the instrumentation necessary to the dosimetry monitoring. To do that the presentation gives the results of the modeling of a prototype of a equivalent tissue proportional counter (C.P.E.T.) and of the C.R.A.M.A.L. ( radiation protection apparatus marketed by the Eurisys Mesures society). (N.C.)

  16. Electron microscope study of irradiated beryllium oxide; Etude au microscope electronique de l'oxyde de beryllium irradie

    Energy Technology Data Exchange (ETDEWEB)

    Bisson, A A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-06-01

    The beryllium oxide is studied first by fractography, before and after irradiation, using sintered samples. The fractures are examined under different aspects. The higher density sintered samples, with transgranular fractures are the most interesting for a microscopic study. It is possible to mark the difference between the 'pores' left by the sintering process and the 'bubbles' of gases that can be produced by former thermal treatments. After irradiation, the grain boundaries are very much weakened. By annealing, it is possible to observe the evolution of the gases produced by the reaction (n, 2n) and (n. {alpha}) and gathered on the grain boundaries. The irradiated beryllium oxide is afterwards studied by transmission. For that, a simple method has been used: little chips of the crushed material are examined. Clusters of point defects produced by neutrons are thus detected in crystals irradiated at the three following doses: 6 x 10{sup 19}, 9 x 10{sup 19} and 2 x 10{sup 20} n{sub f} cm{sup -2} at a temperature below 100 deg. C. For the irradiation at 6 x 10{sup 19} n{sub f} cm{sup -2}, the defects are merely visible, but at 2 x l0{sup 20} n{sub f} cm{sup -2} the crystals an crowded with clusters and the Kikuchi lines have disappeared from the micro-diffraction diagrams. The evolution of the clusters into dislocation loops is studied by a series of annealings. The activation energy (0,37 eV) calculated from the annealing curves suggests that it must be interstitials that condense into dislocation loops. Samples irradiated at high temperatures (650, 900 and 1100 deg. C) are also studied. In those specimens the size of the loops is not the same as the equilibrium size obtained after out of pile annealing at the same temperature. Those former loops are more specifically studied and their Burgers vector is determined by micro-diffraction. (author) [French] L'oxyde de beryllium est d'abord etudie, par une methode fractographique, avant et apres irradiation, en utilisant des echantillons frittes. Les fractures sont examinees sous differents aspects. Ce sont les frittes les plus denses a fractures intragranulaires qui sont les plus interessants pour l'etude microscopique. Le 'pore' resultant du frittage est differencie de la 'bulle' qui peut se former au cours de traitements thermiques ulterieurs par suite de reactions donnant naissance a des gaz. Apres irradiation, la fragilisation intergranulaire est importante. Par recuit, on suit l'evolution des gaz, produits par les reactions (n. 2n) et (n, {alpha}), qui s'accumulent aux joints de grains. L oxyde de beryllium irradie est ensuite etudie par transmission. Pour cela, une methode simple a ete mise au point; elle consiste a examiner les eclats de cristaux broyes. Les amas de defauts ponctuels, formes par les neutrons, sont ainsi mis en evidence dans les cristaux irradies aux trois doses suivantes: 6.10{sup 19}, 9.10{sup 19} et 2.10{sup 20} n{sub r}.cm{sup -2} a une temperature inferieure a 100 deg. C. Pour l'irradiation a 6.10{sup 19} n{sub r}.cm{sup -2} les defauts sont a peine visibles mais a 2.10{sup 20} n{sub r}.cm{sup -2} les cristaux sont cribles d'amas alors que les lignes de Kikuchi ont disparu des diagrammes de microdiffraction. L'evolution des amas de defauts en boucles de dislocation est etudiee par des recuits successifs. L'energie d'activation de 0.37 eV, calculee a partir des courbes de recuits, incite a penser que ce sont les defauts interstitiels qui se condensent en boucles de dislocation. Des echantillons irradies a haute temperature sont egalement etudies (650, 900 et 1100 deg. C). Dans ceux-ci les boucles de dislocation atteignent un etat d'equilibre different de celui des precedentes. Ces dernieres boucles de dislocation sont etudiees plus specialement et leur vecteur de Burgers est determine par microdiffraction. (auteur)

  17. Wavelets as basis functions in electronic structure calculations; Les ondelettes comme fonction de base dans le calcul de structures electroniques

    Energy Technology Data Exchange (ETDEWEB)

    Chauvin, C

    2005-11-15

    This thesis is devoted to the definition and the implementation of a multi-resolution method to determine the fundamental state of a system composed of nuclei and electrons. In this work, we are interested in the Density Functional Theory (DFT), which allows to express the Hamiltonian operator with the electronic density only, by a Coulomb potential and a non-linear potential. This operator acts on orbitals, which are solutions of the so-called Kohn-Sham equations. Their resolution needs to express orbitals and density on a set of functions owing both physical and numerical properties, as explained in the second chapter. One can hardly satisfy these two properties simultaneously, that is why we are interested in orthogonal and bi-orthogonal wavelets basis, whose properties of interpolation are presented in the third chapter. We present in the fourth chapter three dimensional solvers for the Coulomb's potential, using not only the preconditioning property of wavelets, but also a multigrid algorithm. Determining this potential allows us to solve the self-consistent Kohn-Sham equations, by an algorithm presented in chapter five. The originality of our method consists in the construction of the stiffness matrix, combining a Galerkin formulation and a collocation scheme. We analyse the approximation properties of this method in case of linear Hamiltonian, such as harmonic oscillator and hydrogen, and present convergence results of the DFT for small electrons. Finally we show how orbital compression reduces considerably the number of coefficients to keep, while preserving a good accuracy of the fundamental energy. (author)

  18. Electron spin resonance studies of gamma irradiated saccharides. Etudes par resonance paramagnetique electronique de saccharides soumis a un rayonnement gamma

    Energy Technology Data Exchange (ETDEWEB)

    Raffi, J.; Thiery, C.; Battesti, C.; Agnel, J.P.; Triolet, J.; Vincent, P. (CEA Centre d' Etudes de Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Physiologie Vegetale et Ecosystemes)

    1993-04-01

    The radiolysis mechanism of several saccharides was studied in order to understand the radiolysis mechanism of starches. Electron Spin Resonance first performed in powder state did not allow determination of the chemical structure of the induced radicals. The spin-trapping method combined with HPLC however, followed by ESR spectra analysis with the 'Voyons' simulation program was applied to the study of glucose, glucose oligomers and disaccharides. We were thus able to further our understanding of the radiolysis mechanism of starches. 2 tabs., 4 figs.

  19. Paramagnetic resonance and electronic conduction in organic semiconductors; Resonance paramagnetique et conduction electroniques dans les semi-conducteurs organiques

    Energy Technology Data Exchange (ETDEWEB)

    Nechtschein, M. [Commissariat a l' energie atomique et aux energies alternatives - CEA, Laboratoire de Resonance Magnetique (France)

    1963-07-01

    As some organic bodies simultaneously display semi-conducting properties and a paramagnetism, this report addresses the study of conduction in organic bodies. The author first briefly recalls how relationships between conductibility and Electron Paramagnetic Resonance (EPR) can be noticed in a specific case (mineral and metallic semiconductors). He discusses published results related to paramagnetism and conductibility in organic bodies. He reviews various categories of organic bodies in which both properties are simultaneously present. He notably addresses radical molecular crystals, non-radical molecular crystals, charge transfer complexes, pyrolyzed coals, and pseudo-ferromagnetic organic structures. He discusses the issue of relationships between conduction (charge transfer by electrons) and ERP (which reveals the existence of non-paired electrons which provide free spins)

  20. Proprietes optiques dans l'infrarouge lointain et de transport electrique de systemes electroniques a basse dimensionalite

    Science.gov (United States)

    Lefebvre, Jacques

    Cette these presente une etude experimentale de deux systemes ayant des proprietes physiques particulieres decoulant de leur caractere anisotrope. Le premier systeme est un conducteur organique quasi-unidimensionnel, le sel de Bechgaard (TMTSF)sb2ClOsb4. Le second est un systeme mesoscopique base sur une heterostructure a base de GaAs/Alsb{x}Gasb{1-x}As pour lequel la dimensionalite peut etre variee continuement entre deux et un. En dimension un, ce systeme porte le nom de fil quantique. Pour le sel de Bechgaard (TMTSF)sb2ClOsb4, une mesure de la photoconductivite dans l'infrarouge lointain a permis d'identifier une resonance dans la phase onde de densite de spin sous champ magnetique (ou ODSIC). Cette resonance, visible dans la gamme de longueurs d'onde entre 410 et 599 mum, se deplace vers les forts champs magnetiques avec l'augmentation de l'energie du photon. Malgre qu'elle s'apparente a une resonance cyclotron, un calcul theorique du coefficient d'absorption a montre qu'elle est intimement liee a la phase ODSIC et que son energie est donnee par sqrt{4deltasbsp{N}{2}+omegasbsp{c}{2}} avec deltasb{N}, l'amplitude de la bande interdite ODSIC au niveau de Fermi et omegasb{c}, l'energie cyclotron. Le gaz d'electrons dans une heterostructure a base de GaAs/Alsb{x}Gasb{1-x}As a ete etudie dans les regimes dimensionnels entre deux et un (de 2D a quasi-1D en passant par quasi-2D). En combinant des mesures de transport electrique a des mesures de transmission optique dans l'infrarouge lointain obtenues quasi-simultanement sur un meme echantillon, plusieurs conclusions emergent. Entre autres, trois regimes de modulation sont identifies et a leurs frontieres, des signes distinctifs apparaissent autant dans les mesures de transport que dans les mesures de la transmission optique. Une analyse globale permet de degager une vue coherente des modes collectifs dans les differents regimes dimensionnels.

  1. Electronic Information Management for PfP Nations (La gestion electronique des informations pour les pays du PfP)

    Science.gov (United States)

    2003-04-01

    the mind. Chicago: University of Chicago Press. Lindley, J.A. (2000). Strategic issues in electronic librarianship . Bilgi Dünyası, 1(2): 330-341. Lyman...Issues in Science and Technology Librarianship , Summer 2001. [Online]. Available: http://www.library.ucsb.edu/istl/01- summer/refereed.html [4 June... Librarianship 34, Spring 2002. [Online]. Available: http://www.istl.org/02-spring/ article3.html [4 June 2002]. Luce, R. (2001). E-prints intersect the

  2. Some techniques for studying actomyosin by electron microscopy; Quelques techniques d'etude de l'actomyosine par microscopie electronique

    Energy Technology Data Exchange (ETDEWEB)

    Herzberg, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires. Departement de Biologie

    1967-07-01

    A method has been developed for shadowing using a platinum-carbon alloy; it has been applied to the study of the interaction of actomyosin with its substrate ATP. The results obtained seem to favour the hypothesis of a dissociation of the actomyosin into its two components: actin and myosin. Pictures have been obtained showing particles resembling non-polymerized myosin but no rigorous proof of this exists. (author) [French] Une methode d'ombrage par un alliage de platine et carbone a ete mise au point et appliquee a l'etude de l'interaction de l'actomyosine et de son substrat l'ATP. Les resultats obtenus semblent pencher en faveur de la these d'une dissociation de l'actomyosine en ses deux constituants: l'actine et la myosine. Des images ont ete obtenues montrant des particules dont l'identite avec la myosine non polymerisee reste a demontrer plus rigoureusement. (auteur)

  3. Learning Android application testing

    CERN Document Server

    Blundell, Paul

    2015-01-01

    If you are an Android developer looking to test your applications or optimize your application development process, then this book is for you. No previous experience in application testing is required.

  4. Promise Zones for Applicants

    Data.gov (United States)

    Department of Housing and Urban Development — This tool assists applicants to HUD's Promise Zone initiative prepare data to submit with their application by allowing applicants to draw the exact location of the...

  5. Radiation transport methods for nuclear log assessment - an overview

    International Nuclear Information System (INIS)

    Badruzzaman, A.

    1996-01-01

    Methods of radiation transport have been applied to well-logging problems with nuclear sources since the early 1960s. Nuclear sondes are used in identifying rock compositions and fluid properties in reservoirs to predict the porosity and oil saturation. Early computational effort in nuclear logging used diffusion techniques. As computers became more powerful, deterministic transport methods and, finally, Monte Carlo methods were applied to solve these problems in three dimensions. Recently, the application has been extended to problems with a new generation of devices, including spectroscopic sondes that measure such quantities as the carbon/oxygen ratio to predict oil saturation and logging-while-drilling (LWD) sondes that take neutron and gamma measurements as they rotate in the borehole. These measurements present conditions that will be difficult to calibrate in the laboratory

  6. Credential Application Awaiting Information

    Data.gov (United States)

    Department of Homeland Security — When a Credential application or required documentation is incomplete, an Awaiting Information letter is issued. The application process cannot continue until all...

  7. Use of charge storage tube in the building of a buffer memory; Application des tubes a memoire a la realisation d'une memoire tampon

    Energy Technology Data Exchange (ETDEWEB)

    Marcovici, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The apparatus manufactured is a buffer memory to be located between a detector and a multichannel pulse height analyser which received the pulses at regular times. The buffer memory and the detector have the same order of dead time, then the whole is equivalent to a detector plus an analyser without dead time, but that is true only if the mean time between two consecutive pulses from the detector is greater than the analyser time resolution. The apparatus used two electrostatic barrier grid tubes; the first one stores temporarily the data from the detector during the time necessary to analyse the data recorded on the other one. At the end of the analysis, the roles of the two tubes are permuted. The advantage on similar other apparatus is the uninterrupted recording of the pulse height informations from the detector and the uninterrupted analysis. In addition, the transistorization is interesting for reliability and maintainability. The document presents principles and data on the barrier grid storage tube, considers its conventional uses in nuclear electronics studies statistically the reduction of counting losses. It describes the test equipment and the tests which permits the screening of the best cathode ray storage tube for this application. Finally, it describes the item and gives the wave shapes in various points of the buffer memory. (author) [French] Le dispositif realise est une memoire tampon destinee a etre placee entre un detecteur et un selecteur d'amplitude multicanaux. Elle permet a ce dernier de recevoir et analyser les impulsions a intervalles de temps reguliers. Son temps de resolution est comparable a celui du detecteurs, l'ensemble est donc equivalent a un systeme constitue d'un detecteur suivi d'un selecteur sans temps mort, mais ceci n'est valable que tant que l'intervalle de temps moyen entre deux impulsions issues du detecteur est superieur au temps d'analyse necessite par le selecteur. Ce dispositif est constitue de deux tubes a memoire

  8. Binary analysis: 1. part: definitions and treatment of binary functions; 2. part: applications and functions of trans-coding; Analyse binaire: 1ere partie: definitions et traitements des fonctions binaires; 2eme partie: applications et fonctions de transcodage

    Energy Technology Data Exchange (ETDEWEB)

    Vallee, R L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    The study of binary groups under their mathematical aspects constitutes the matter of binary analysis, the purpose of which consists in developing altogether simple, rigorous and practical methods needed by the technicians, the engineers and all those who may be mainly concerned by digital processing. This subject, fast extending if not determining, however tends actually to play a main part in nuclear electronics as well as in several other research areas. (authors) [French] L'analyse binaire a pour objet l'etude mathematique des proprietes d'ensembles binaires algebriques et pour but l'elaboration de methodes simples, rigoureuses et pratiques, destinees aux techniciens, aux ingenieurs et a tous ceux qu'interesse directement le traitement numerique de l'information, discipline en expansion rapide qui, deja, en electronique nucleaire comme dans de nombreux autres domaines de la recherche, tend a jouer un role essentiel sinon determinant. (auteurs)

  9. Sight Application Analysis Tool

    Energy Technology Data Exchange (ETDEWEB)

    Bronevetsky, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-09-17

    The scale and complexity of scientific applications makes it very difficult to optimize, debug and extend them to support new capabilities. We have developed a tool that supports developers’ efforts to understand the logical flow of their applications and interactions between application components and hardware in a way that scales with application complexity and parallelism.

  10. Evolution des quasiparticules nodales du cuprate supraconducteur YBa2Cu3Oy en conductivite thermique

    Science.gov (United States)

    Rene de Cotret, Samuel

    Ce memoire presente des mesures de conductivite thermique sur les supraconducteurs YBCO et Tl-2201 afin de statuer sur la presence possible d'un point critique quantique (QCP) dans le diagramme de phase de cuprates. Ce point critique quantique serait a l'origine de la reconstruction de la surface de Fermi, d'un large cylindre de trous en de petites poches de trous et d'electrons. La conductivite thermique dans le regime T → 0 permet d'extraire une quantite purement electronique liee aux vitesses de Fermi et du gap, au noeud. Une discontinuite dans cette quantite pourrait signaler la traversee du dopage critique qui reconstruit la surface de Fermi. Plusieurs sondes experimentales distinguent une transition de phase ou un crossover a T* a temperature finie. D'autres sondes mettent en evidence une transition de phase sous l'effet d'un champ magnetique. La presence ou non de cet ordre, a temperature et champ magnetique nul questionne la communaute depuis plusieurs annees. Dans cette etude, nous detectons une variation brusque de kappa0/T a p = 0.18 dans YBCO et a p = 0.20 dans Tl-2201. Ces sauts sont interpretes comme un signe de la transition a temperature nulle et sont en faveur d'un QCP. Le manque de donnees d'un meme materiau a ces dopages ne permet pas de valider hors de tout doute l'existence d'un point critique quantique. Le modele theorique YRZ decrit aussi bien les donnees de conductivite thermique. Des pistes de travaux experimentaux a poursuivre sont proposees pour determiner la presence ou non du QCP de facon franche. Mots-cles : Supraconducteurs, cuprates, conductivite thermique, point critique quantique.

  11. Microwave power engineering applications

    CERN Document Server

    Okress, Ernest C

    2013-01-01

    Microwave Power Engineering, Volume 2: Applications introduces the electronics technology of microwave power and its applications. This technology emphasizes microwave electronics for direct power utilization and transmission purposes. This volume presents the accomplishments with respect to components, systems, and applications and their prevailing limitations in the light of knowledge of the microwave power technology. The applications discussed include the microwave heating and other processes of materials, which utilize the magnetron predominantly. Other applications include microwave ioni

  12. Wapice News Mobile Application

    OpenAIRE

    Söylemez, Ilke

    2017-01-01

    Since the mobile phones started to have an increasingly significant role in daily life, the mobile application development also started to be an important area in the software industry. The problem for mobile application developers is to develop a mobile application which supports all the devices and platforms on the market. This issue created a need for cross platform mobile applications. The cross platform mobile development refers to the development of mobile applications that could be use...

  13. Connected vehicle applications : safety.

    Science.gov (United States)

    2016-01-01

    Connected vehicle safety applications are designed to increase situational awareness : and reduce or eliminate crashes through vehicle-to-infrastructure, vehicle-to-vehicle, : and vehicle-to-pedestrian data transmissions. Applications support advisor...

  14. Applicant Satisfaction Survey

    Data.gov (United States)

    Office of Personnel Management — The Chief Human Capital Officers developed 3 surveys that asks applicants to assess their satisfaction with the application process on a 1-10 point scale, with 10...

  15. Web Application Vulnerabilities

    OpenAIRE

    Yadav, Bhanu

    2014-01-01

    Web application security has been a major issue in information technology since the evolvement of dynamic web application. The main objective of this project was to carry out a detailed study on the top three web application vulnerabilities such as injection, cross site scripting, broken authentication and session management, present the situation where an application can be vulnerable to these web threats and finally provide preventative measures against them. ...

  16. Mobile food ordering application

    OpenAIRE

    Yang, Fan

    2014-01-01

    The purpose of this thesis was to build a food ordering client server application for Tom Yum Thai Oy, which is a Thai restaurant in Vaasa. For the customer, this application provides a view of current food information (category, name, image,price, description etc.) on the website and Android application. The customer can order food from these two platforms. For the administrator in restaurant, this application offers a series of operations to add, update, delete and query the information of ...

  17. SIMS applications workshop. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    The first ANSTO/AINSE SIMS Workshop drew together a mixture of Surface Analysis experts and Surface Analysis users with the concept that SIMS analysis has to be enfolded within the spectrum of surface analysis techniques and that the user should select the technique most applicable to the problem. With this concept in mind the program was structured as sessions on SIMS Facilities; Applications to Mineral Surfaces; Applications to Biological Systems, Applications to Surfaces as Semi- conductors, Catalysts and Surface Coatings; and Applications to Ceramics

  18. Application Portable Parallel Library

    Science.gov (United States)

    Cole, Gary L.; Blech, Richard A.; Quealy, Angela; Townsend, Scott

    1995-01-01

    Application Portable Parallel Library (APPL) computer program is subroutine-based message-passing software library intended to provide consistent interface to variety of multiprocessor computers on market today. Minimizes effort needed to move application program from one computer to another. User develops application program once and then easily moves application program from parallel computer on which created to another parallel computer. ("Parallel computer" also include heterogeneous collection of networked computers). Written in C language with one FORTRAN 77 subroutine for UNIX-based computers and callable from application programs written in C language or FORTRAN 77.

  19. Criteria for Social Applications

    DEFF Research Database (Denmark)

    Atzenbeck, Claus; Tzagarakis, Manolis

    2007-01-01

    Social networks are becoming increasingly important for a wide number of applications. This is in particular true in the context of the Web 2.0 movement where a number of Web-based applications emerged - termed social networking applications or services - that allow the articulation of social...... relationships between individuals thus creating social networks. Although Web 2.0 applications are a popular and characteristic class of such applications they are not the only representatives that permit such functionality. Applications in the Personal Information Management domain exhibit similar...... characteristics but have never been mentioned in the context of social networking. The increasing number and diversity of such applications makes their study, analysis and evaluation from a systems point of view critical and important as their study may help identify relationships that are useful when attempting...

  20. Electronic Submissions of Pesticide Applications

    Science.gov (United States)

    Applications for pesticide registration can be submitted electronically, including forms, studies, and draft product labeling. Applicants need not submit multiple electronic copies of any pieces of their applications.

  1. Conception et synthèse de sondes moléculaires pour l'étude d'interactions polyphénol-protéine

    OpenAIRE

    Tran , Dong tien

    2015-01-01

    Polyphenols are plant secondary metabolites. These natural substances, known for their antioxidant and anti-free radical properties, generally contribute to the protection of human health not only against cardiovascular and neurodegenerative diseases, but also against certain cancers and diabetes. In some cases, these beneficial biological effects could also be related to specific polyphenol-protein interactions. However, studying this type of interactions has suffered from the lack of adequa...

  2. Probe for detection of denting in PWR steam generator tubes; Sonde de detection du denting des tubes de generateurs de vapeur REP

    Energy Technology Data Exchange (ETDEWEB)

    Gerardin, J P; Germain, J L; Nio, J C

    1994-07-01

    In certain types of PWR steam generator, oxide deposits can lead to embedding, and subsequently to deformation of a tube (the phenomenon of ``denting``). Such embedding changes the vibratory behavior of the tubes and can result in fatigue cracking. This type of cracking can also be worsened in the event of improper assembly of the anti-vibration spacer bars supporting the U-bends. To prevent such incidents and provide for effective preventive condition-directed maintenance of its PWR steam generators, EDF has undertaken the study and development of a probe to detect this type of phenomenon. The studies began in 1990 and led to the building of an initial prototype probe. The principle behind the probe consists in inducing vibration in the U-bend and determining the main resonance modes of the tube. Measurements of frequency and amplitude and calculation of damping enable characterization of the mechanical behavior of the U-bend. The most important parameter is damping, for which the value must be sufficiently high to ensure that the tube is not subjected to major vibratory amplitudes during operation. Numerous tests have been performed with the first prototype version of the probe, on a mock-up in the test area and on one of the demounted steam generators on the Dampierre site. These different tests have enabled validation of the operating principle, fine-tuning the process, pinpointing certain mechanical problems in the probe design, and obtaining the first indications as to the real vibratory behavior of U-bends on a steam generator. On the basis of these preliminary tests, the specifications were drawn up for an industrial version of the probe. Following a call for bids and the choice of a manufacturer, work began on fabrication of a new probe model in 1993. This version was delivered at the end of 1993 and testing began in 1994. (authors). 5 figs., 2 tabs.

  3. Analysis of 2015 Winter In-Flight Icing Case Studies with Ground-Based Remote Sensing Systems Compared to In-Situ SLW Sondes

    Science.gov (United States)

    Serke, David J.; King, Michael Christopher; Hansen, Reid; Reehorst, Andrew L.

    2016-01-01

    National Aeronautics and Space Administration (NASA) and the National Center for Atmospheric Research (NCAR) have developed an icing remote sensing technology that has demonstrated skill at detecting and classifying icing hazards in a vertical column above an instrumented ground station. This technology has recently been extended to provide volumetric coverage surrounding an airport. Building on the existing vertical pointing system, the new method for providing volumetric coverage utilizes a vertical pointing cloud radar, a multi-frequency microwave radiometer with azimuth and elevation pointing, and a NEXRAD radar. The new terminal area icing remote sensing system processes the data streams from these instruments to derive temperature, liquid water content, and cloud droplet size for each examined point in space. These data are then combined to ultimately provide icing hazard classification along defined approach paths into an airport. To date, statistical comparisons of the vertical profiling technology have been made to Pilot Reports and Icing Forecast Products. With the extension into relatively large area coverage and the output of microphysical properties in addition to icing severity, the use of these comparators is not appropriate and a more rigorous assessment is required. NASA conducted a field campaign during the early months of 2015 to develop a database to enable the assessment of the new terminal area icing remote sensing system and further refinement of terminal area icing weather information technologies in general. In addition to the ground-based remote sensors listed earlier, in-situ icing environment measurements by weather balloons were performed to produce a comprehensive comparison database. Balloon data gathered consisted of temperature, humidity, pressure, super-cooled liquid water content, and 3-D position with time. Comparison data plots of weather balloon and remote measurements, weather balloon flight paths, bulk comparisons of integrated liquid water content and icing cloud extent agreement, and terminal-area hazard displays are presented. Discussions of agreement quality and paths for future development are also included.

  4. Photoelectron imaging, probe of the dynamics: from atoms... to clusters; Imagerie de photoelectrons, sonde de la dynamique: des atomes... aux agregats

    Energy Technology Data Exchange (ETDEWEB)

    Lepine, F

    2003-06-15

    This thesis concerns the study of the deexcitation of clusters and atoms by photoelectron imaging. The first part is dedicated to thermionic emission of a finite size system. A 3-dimensional imaging setup allows us to measure the time evolution of the kinetic energy spectrum of electrons emitted from different clusters (W{sub n}{sup -}, C{sub n}{sup -}, C{sub 60}). Then we have a direct access to the fundamental quantities which characterize this statistical emission: the temperature of the finite heat bath and the decay rate. The second part concerns the ionization of atomic Rydberg states placed in a static electric field. We performed the first experiment of photoionization microscopy which allows us to obtain a picture which is the macroscopic projection of the electronic wave function. Then we have access to the detail of the photoionization and particularly to the quantum properties of the electron usually confined at the atomic scale. (author)

  5. X ray emission: a tool and a probe for laser - clusters interaction; L'emission X: un outil et une sonde pour l'interaction laser - agregats

    Energy Technology Data Exchange (ETDEWEB)

    Prigent, Ch

    2004-12-01

    In intense laser-cluster interaction, the experimental results show a strong energetic coupling between radiation and matter. We have measured absolute X-ray yields and charge state distributions under well control conditions as a function of physical parameters governing the interaction; namely laser intensity, pulse duration, wavelength or polarization state of the laser light, the size and the species of the clusters (Ar, Kr, Xe). We have highlighted, for the first time, an intensity threshold in the X-ray production very low ({approx} 2.10{sup 14} W/cm{sup 2} for a pulse duration of 300 fs) which can results from an effect of the dynamical polarisation of clusters in an intense electric field. A weak dependence with the wavelength (400 nm / 800 nm) on the absolute X-ray yields has been found. Moreover, we have observed a saturation of the X-ray emission probability below a critical cluster size. (author)

  6. Antagonistic effect of alkaloids and saponins on bioactivity in the quinine tree (Rauvolfia caffra sond.): further evidence to support biotechnology in traditional medicinal plants.

    Science.gov (United States)

    Milugo, Trizah K; Omosa, Leonida K; Ochanda, James O; Owuor, Bethwell O; Wamunyokoli, Fred A; Oyugi, Julius O; Ochieng, Joel W

    2013-10-26

    The Quinine tree (Rauvolfia caffra) is used as a medicinal plant among traditional communities in many countries to manage tumors and other diseases associated with oxidative stress. To validate indigenous knowledge and possibly position this herb for technology uptake and utilization, we established the level of antioxidant activity in R. caffra, and probed for the presence of associated phytochemicals. Antioxidant activity was determined on 1,1-diphenyl-2-picrylhydrazyl (DPPH) while major phytochemicals were identified by multiple tests on methanol fractions. R. caffra showed promise as a cure, with antioxidant activity comparable to the commercially used drug quercetin (R. caffra = 79.7% ±1.9; quercetin = 82.6% ± 2.0). However, we found two phytochemicals with possible antagonistic effect: co-occurrence of alkaloids and saponins significantly reduced antioxidant activity (alkaloids only = 63%; alkaloids plus saponins = 15%; steroids, terpenoids and cardiac glycosides = 82%), thus alkaloids and saponins should be exclusive to each other in drug formulations. Antagonistic relationship among phytochemicals would affect the efficacy of crude extracts as used in traditional medicine. Unlike in herbal medicine, use of modern biotechnology in extraction, purification and design of optimal combinations will ensure efficient drug formulations with optimum bioactivity and minimum toxicity. Metabolic pathway engineering under a controlled environment may optimize availability of desired compounds.

  7. Validation of Copernicus Height-resolved Ozone data Products from Sentinel-5P TROPOMI using global sonde and lidar networks (CHEOPS-5P)

    Science.gov (United States)

    Keppens, Arno; Lambert, Jean-Christopher; Hubert, Daan; Verhoelst, Tijl; Granville, José; Ancellet, Gérard; Balis, Dimitris; Delcloo, Andy; Duflot, Valentin; Godin-Beekmann, Sophie; Koukouli, Marilisa; Leblanc, Thierry; Stavrakou, Trissevgeni; Steinbrecht, Wolfgang; Stübi, Réné; Thompson, Anne

    2017-04-01

    Monitoring of and research on air quality, stratospheric ozone and climate change require global and long-term observation of the vertical distribution of atmospheric ozone, at ever-improving resolution and accuracy. Global tropospheric and stratospheric ozone profile measurement capabilities from space have therefore improved substantially over the last decades. Being a part of the space segment of the Copernicus Atmosphere and Climate Services that is currently under implementation, the upcoming Sentinel-5 Precursor (S5P) mission with its imaging spectrometer TROPOMI (Tropospheric Monitoring Instrument) is dedicated to the measurement of nadir atmospheric radiance and solar irradiance in the UV-VIS-NIR-SWIR spectral range. Ozone profile and tropospheric ozone column data will be retrieved from these measurements by use of several complementary retrieval methods. The geophysical validation of the enhanced height-resolved ozone data products, as well as support to the continuous evolution of the associated retrieval algorithms, is a key objective of the CHEOPS-5P project, a contributor to the ESA-led S5P Validation Team (S5PVT). This work describes the principles and implementation of the CHEOPS-5P quality assessment (QA) and validation system. The QA/validation methodology relies on the analysis of S5P retrieval diagnostics and on comparisons of S5P data with reference ozone profile measurements. The latter are collected from ozonesonde, stratospheric lidar and tropospheric lidar stations performing network operation in the context of WMO's Global Atmosphere Watch, including the NDACC global and SHADOZ tropical networks. After adaptation of the Multi-TASTE versatile satellite validation environment currently operational in the context of ESA's CCI, EUMETSAT O3M-SAF, and CEOS and SPARC initiatives, a list of S5P data Quality Indicators (QI) will be derived from complementary investigations: (1) data content and information content studies of the S5P data retrievals; (2) traceable preparation of the S5P data and correlative measurements in view of data comparisons (co-location studies, unit and representation conversions, handling of smoothing and sampling issues, independent estimate of tropopause altitude, (sub-)column integration...), with associated error propagation; (3) data comparisons leading to statistical estimates of the systematic bias and random difference between S5P and reference network data as a function of latitude, their cycles, their long-term evolution, and their dependences on influence quantities (e.g., clouds, solar zenith angle, and slant column density); (4) and finally the assessment of compliance with user requirements as formulated, e.g., by Copernicus Atmosphere and Climate services and by GCOS.

  8. A strange nucleon probe: the parity violation in ep{yields}ep; Une etrange sonde du nucleon: la violation de parite en diffusion ep{yields}ep

    Energy Technology Data Exchange (ETDEWEB)

    Cavata, Ch

    1998-10-01

    Recent experiments have confirmed the importance of strange quarks in the description of the spin structure of the proton. This unexpected fact has spurred an intense experimental activity to study the contribution of strange quarks to other aspects of the nucleon. In this framework experiments have been designed to weigh up this contribution to the charge distribution and the magnetization of the nucleon. The experimental way that leads to the measuring of the s-quark contribution is presented. The strange form factor can be deduced from the weak form factor of the proton combined with its electromagnetic form factors. The weak form factor can be measured by studying parity violation in ep elastic scattering. One of the chapters reviews the experimental equipment required to perform parity breaking measurements.The preliminary results of 2 experiments: SAMPLE and HAPPEX are given. (A.C.)

  9. Rare earth(III) complexes for the development of new magnetic and luminescent probes; Complexes de lanthanides(III) pour le developpement de nouvelles sondes magnetiques et luminescentes

    Energy Technology Data Exchange (ETDEWEB)

    Nonat, A

    2007-10-15

    The simultaneous optimisation of the molecular parameters determining the relaxivity (number of coordinated water molecules, water-exchange, rotation dynamics of the whole complex, electronic relaxation, Gd(III)-proton distance) is essential to prepare efficient contrast agents. The aim of this work is on the one hand to design and study complexes with a high number of bound water molecules and to understand the influence of the coordination sphere on the stability and on the electronic relaxation and on the other hand, to use the ligand as a chromophore for the development of luminescent probes for biomedical imaging. We present the structure, the stability and the relaxivity of Gd(III) complexes of two series of tripodal ligands containing picolinate units based either on the 1,4,7-tri-aza-cyclononane ring or on a tertiary amine. These complexes show high relaxivity in water and in serum and can establish a non covalent interaction with serum albumin. The interpretation of the water proton relaxivity with the help of new relaxometric methods based on an auxiliary probe solute has allowed us to show that both the presence of the picolinate groups and the 1,4,7-tri-aza-cyclononane framework can lead to Gd(III) complexes with favourable electronic relaxation properties. This ligands have also been used for Eu(III) and Tb(III) complexation leading to strong luminescence in visible light. Other complexes derived from 8-hydroxyquinoline unit which display a very high luminescence in infrared are also studied. (author)

  10. Reactions on catalytic probe surface during oxygen plasma treatment of polyether sulphone: Reakcije na površini katalitične sonde med plazemsko obdelavo polieter sulfona:

    OpenAIRE

    Mozetič, Miran

    1998-01-01

    Experiments on the behavior of a nickel catalytic probe during activation of the surface of polyether sulphone in oxygen plasma are described. The temperature of the probe mounted 30 cm apart from inductively coupled RF oxygen plasma was measured for the case of empty dischaarge vessel and the case a sample with the dimensions of 8 cm x 1.2 cm x 0.4 cm was mounted in the middle of the discharge coil. It was found that both the maximum temperature and the first time derivative of the probe was...

  11. Technical applications of aerogels

    International Nuclear Information System (INIS)

    Hrubesh, L.W.

    1997-01-01

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels

  12. Industrial Application of Accelerators

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    At CERN, we are very familiar with large, high energy particle accelerators. However, in the world outside CERN, there are more than 35000 accelerators which are used for applications ranging from treating cancer, through making better electronics to removing harmful micro-organisms from food and water. These are responsible for around $0.5T of commerce each year. Almost all are less than 20 MeV and most use accelerator types that are somewhat different from what is at CERN. These lectures will describe some of the most common applications, some of the newer applications in development and the accelerator technology used for them. It will also show examples of where technology developed for particle physics is now being studied for these applications. Rob Edgecock is a Professor of Accelerator Science, with a particular interest in the medical applications of accelerators. He works jointly for the STFC Rutherford Appleton Laboratory and the International Institute for Accelerator Applications at the Univer...

  13. Industrial Application of Accelerators

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    At CERN, we are very familiar with large, high energy particle accelerators. However, in the world outside CERN, there are more than 35000 accelerators which are used for applications ranging from treating cancer, through making better electronics to removing harmful micro-organisms from food and water. These are responsible for around $0.5T of commerce each year. Almost all are less than 20 MeV and most use accelerator types that are somewhat different from what is at CERN. These lectures will describe some of the most common applications, some of the newer applications in development and the accelerator technology used for them. It will also show examples of where technology developed for particle physics is now being studied for these applications. Rob Edgecock is a Professor of Accelerator Science, with a particular interest in the medical applications of accelerators. He works jointly for the STFC Rutherford Appleton Laboratory and the International Institute for Accelerator Applications at the Uni...

  14. Applications of Photocatalytic Disinfection

    Directory of Open Access Journals (Sweden)

    Joanne Gamage

    2010-01-01

    Full Text Available Due to the superior ability of photocatalysis to inactivate a wide range of harmful microorganisms, it is being examined as a viable alternative to traditional disinfection methods such as chlorination, which can produce harmful byproducts. Photocatalysis is a versatile and effective process that can be adapted for use in many applications for disinfection in both air and water matrices. Additionally, photocatalytic surfaces are being developed and tested for use in the context of “self-disinfecting” materials. Studies on the photocatalytic technique for disinfection demonstrate this process to have potential for widespread applications in indoor air and environmental health, biological, and medical applications, laboratory and hospital applications, pharmaceutical and food industry, plant protection applications, wastewater and effluents treatment, and drinking water disinfection. Studies on photocatalytic disinfection using a variety of techniques and test organisms are reviewed, with an emphasis on the end-use application of developed technologies and methods.

  15. Support vector machines applications

    CERN Document Server

    Guo, Guodong

    2014-01-01

    Support vector machines (SVM) have both a solid mathematical background and good performance in practical applications. This book focuses on the recent advances and applications of the SVM in different areas, such as image processing, medical practice, computer vision, pattern recognition, machine learning, applied statistics, business intelligence, and artificial intelligence. The aim of this book is to create a comprehensive source on support vector machine applications, especially some recent advances.

  16. Microprocessors principles and applications

    CERN Document Server

    Debenham, Michael J

    1979-01-01

    Microprocessors: Principles and Applications deals with the principles and applications of microprocessors and covers topics ranging from computer architecture and programmed machines to microprocessor programming, support systems and software, and system design. A number of microprocessor applications are considered, including data processing, process control, and telephone switching. This book is comprised of 10 chapters and begins with a historical overview of computers and computing, followed by a discussion on computer architecture and programmed machines, paying particular attention to t

  17. Applications of combinatorial optimization

    CERN Document Server

    Paschos, Vangelis Th

    2013-01-01

    Combinatorial optimization is a multidisciplinary scientific area, lying in the interface of three major scientific domains: mathematics, theoretical computer science and management. The three volumes of the Combinatorial Optimization series aims to cover a wide range of topics in this area. These topics also deal with fundamental notions and approaches as with several classical applications of combinatorial optimization. "Applications of Combinatorial Optimization" is presenting a certain number among the most common and well-known applications of Combinatorial Optimization.

  18. Android Applications Security

    OpenAIRE

    Paul POCATILU

    2011-01-01

    The use of smartphones worldwide is growing very fast and also the malicious attacks have increased. The mobile security applications development keeps the pace with this trend. The paper presents the vulnerabilities of mobile applications. The Android applications and devices are analyzed through the security perspective. The usage of restricted API is also presented. The paper also focuses on how users can prevent these malicious attacks and propose some prevention measures, including the a...

  19. Galileo Timing Applications

    Science.gov (United States)

    2007-11-01

    public bodies like university and research institutes. The user community analysis also includes a market analysis performed by a specialized company to... companies and public institutions (e.g., universities, research laboratories) that work in several different application domains in order to virtually...Summary of application domains for the use of time in cryptography. B2G B2B B2C Applications Military waypoints, judicial reports, construction

  20. Refrigeration systems and applications

    CERN Document Server

    Dincer, Ibrahim

    2010-01-01

    Refrigeration Systems and Applications, 2nd edition offers a comprehensive treatise that addresses real-life technical and operational problems, enabling the reader to gain an understanding of the fundamental principles and the practical applications of refrigeration technology. New and unique analysis techniques (including exergy as a potential tool), models, correlations, procedures and applications are covered, and recent developments in the field are included - many of which are taken from the author's own research activities in this area. The book also includes so

  1. Exploiting chaos for applications

    Energy Technology Data Exchange (ETDEWEB)

    Ditto, William L., E-mail: wditto@hawaii.edu [Department of Physics and Astronomy, University of Hawaii at Mānoa, Honolulu, Hawaii 96822 (United States); Sinha, Sudeshna, E-mail: sudeshna@iisermohali.ac.in [Indian Institute of Science Education and Research (IISER), Mohali, Knowledge City, Sector 81, SAS Nagar, PO Manauli 140306, Punjab (India)

    2015-09-15

    We discuss how understanding the nature of chaotic dynamics allows us to control these systems. A controlled chaotic system can then serve as a versatile pattern generator that can be used for a range of application. Specifically, we will discuss the application of controlled chaos to the design of novel computational paradigms. Thus, we present an illustrative research arc, starting with ideas of control, based on the general understanding of chaos, moving over to applications that influence the course of building better devices.

  2. Microcomputer interfacing and applications

    CERN Document Server

    Mustafa, M A

    1990-01-01

    This is the applications guide to interfacing microcomputers. It offers practical non-mathematical solutions to interfacing problems in many applications including data acquisition and control. Emphasis is given to the definition of the objectives of the interface, then comparing possible solutions and producing the best interface for every situation. Dr Mustafa A Mustafa is a senior designer of control equipment and has written many technical articles and papers on the subject of computers and their application to control engineering.

  3. Exploiting chaos for applications.

    Science.gov (United States)

    Ditto, William L; Sinha, Sudeshna

    2015-09-01

    We discuss how understanding the nature of chaotic dynamics allows us to control these systems. A controlled chaotic system can then serve as a versatile pattern generator that can be used for a range of application. Specifically, we will discuss the application of controlled chaos to the design of novel computational paradigms. Thus, we present an illustrative research arc, starting with ideas of control, based on the general understanding of chaos, moving over to applications that influence the course of building better devices.

  4. Application Layer Multicast

    Science.gov (United States)

    Allani, Mouna; Garbinato, Benoît; Pedone, Fernando

    An increasing number of Peer-to-Peer (P2P) Internet applications rely today on data dissemination as their cornerstone, e.g., audio or video streaming, multi-party games. These applications typically depend on some support for multicast communication, where peers interested in a given data stream can join a corresponding multicast group. As a consequence, the efficiency, scalability, and reliability guarantees of these applications are tightly coupled with that of the underlying multicast mechanism.

  5. REST based mobile applications

    Science.gov (United States)

    Rambow, Mark; Preuss, Thomas; Berdux, Jörg; Conrad, Marc

    2008-02-01

    Simplicity is the major advantage of REST based webservices. Whereas SOAP is widespread in complex, security sensitive business-to-business aplications, REST is widely used for mashups and end-user centric applicatons. In that context we give an overview of REST and compare it to SOAP. Furthermore we apply the GeoDrawing application as an example for REST based mobile applications and emphasize on pros and cons for the use of REST in mobile application scenarios.

  6. Irregular Applications: Architectures & Algorithms

    Energy Technology Data Exchange (ETDEWEB)

    Feo, John T.; Villa, Oreste; Tumeo, Antonino; Secchi, Simone

    2012-02-06

    Irregular applications are characterized by irregular data structures, control and communication patterns. Novel irregular high performance applications which deal with large data sets and require have recently appeared. Unfortunately, current high performance systems and software infrastructures executes irregular algorithms poorly. Only coordinated efforts by end user, area specialists and computer scientists that consider both the architecture and the software stack may be able to provide solutions to the challenges of modern irregular applications.

  7. Nanomaterials for Defense Applications

    Science.gov (United States)

    Turaga, Uday; Singh, Vinitkumar; Lalagiri, Muralidhar; Kiekens, Paul; Ramkumar, Seshadri S.

    Nanotechnology has found a number of applications in electronics and healthcare. Within the textile field, applications of nanotechnology have been limited to filters, protective liners for chemical and biological clothing and nanocoatings. This chapter presents an overview of the applications of nanomaterials such as nanofibers and nanoparticles that are of use to military and industrial sectors. An effort has been made to categorize nanofibers based on the method of production. This chapter particularly focuses on a few latest developments that have taken place with regard to the application of nanomaterials such as metal oxides in the defense arena.

  8. Application Technology Research Unit

    Data.gov (United States)

    Federal Laboratory Consortium — To conduct fundamental and developmental research on new and improved application technologies to protect floricultural, nursery, landscape, turf, horticultural, and...

  9. Mongoose for application development

    CERN Document Server

    Holmes, Simon

    2013-01-01

    This book is a mini tutorial full of code examples and strategies to give you plenty of options when building your own applications with MongoDB.This book is ideal for people who want to develop applications on the Node.js stack quickly and efficiently. Prior knowledge of the stack is not essential as the book briefly covers the installation of the core components and builds all aspects of the example application. The focus of the book is on what Mongoose adds to you applications, so experienced Node.js developers will also benefit.

  10. Hardening Azure applications

    CERN Document Server

    Gaurav, Suraj

    2015-01-01

    Learn what it takes to build large scale, mission critical applications -hardened applications- on the Azure cloud platform. This 208 page book covers the techniques and engineering principles that every architect and developer needs to know to harden their Azure/.NET applications to ensure maximum reliability and high availability when deployed at scale. While the techniques are implemented in .NET and optimized for Azure, the principles here will also be valuable for users of other cloud-based development platforms. Applications come in a variety of forms, from simple apps that can be bui

  11. Electrical applications 2

    CERN Document Server

    Tyler, David W

    1998-01-01

    Electrical Applications 2 covers the BTEC NII level objectives in Electrical Applications U86/330. To understand the applications, a knowledge of the underlying principles is needed and these are covered briefly in the text. Key topics discussed are: the transmission and distribution of electrical energy; safety and regulations; tariffs and power factor correction; materials and their applications in the electrical industry; transformers; DC machines; illumination; and fuse protection. Included in each chapter are worked examples which should be carefully worked through before progressing to t

  12. Nanotechnology in Aerospace Applications

    National Research Council Canada - National Science Library

    Meyyappan, M

    2007-01-01

    The aerospace applications for nanotechnology include high strength, low weight composites, improved electronics and displays with low power consumption, variety of physical sensors, multifunctional...

  13. High temperature elastic constant measurements: application to plutonium; Mesure des constantes elastiques a haute temperature application au plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Bouchet, J M [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-03-01

    We present an apparatus with which we have measured the Young's modulus and the Poisson's ratio of several compounds from the resonance frequency of cylinders in the temperature range 0 deg. C-700 deg. C. We especially studied the elastic constants of plutonium and measured for the first time to our knowledge the Young's modulus of Pu{sub {delta}} and Pu{sub {epsilon}}. E{sub {delta}} 360 deg. C = 1.6 10{sup 11} dy/cm{sup 2}; E{sub {epsilon}} 490 deg. C = 1.1 10{sup 11} dy/cm{sup 2}, {sigma}{sub {epsilon}} = 0.25 {+-} 0.03 Using our results, we have calculated the compressibility, the Debye temperature, the Grueneisen constant and the electronic specific heat of Pu{sub {epsilon}}. (author) [French] Nous decrivons un appareil qui permet de mesurer les constantes elastiques (module de Young et module de Poisson) jusqu'a 700 deg. C a partir des frequences de resonance de barreaux cylindriques. Nous avons plus specialement etudie le plutonium et determine pour la premiere fois a notre connaissance le module de Young des phases {delta} et {epsilon}: E{sub {delta}} 360 deg. C = 1.6 10{sup 11} dy/cm{sup 2}; E{sub {epsilon}} 490 deg. C = 1.1 10{sup 11} dy/cm{sup 2}, {sigma}{sub {epsilon}} = 0.25 {+-} 0.03 Nos mesures nous ont permis de calculer la compressibilite, la temperature de Debye, la constante de Gruneisen et la chaleur specifique electronique de Pu{sub {epsilon}}. (auteur)

  14. Effect of impurities on the high-temperature brittleness of commercial grade beryllium; Influence des impuretes sur la fragilite a chaud du beryllium de purete commerciale

    Energy Technology Data Exchange (ETDEWEB)

    Mallen-Herrero, J M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-05-15

    Portevin-Le Chatelier dans la zone de temperature ou la ductilite diminue, nous a permis de relier la fragilite a une interaction dislocation - impurete. Dans une deuxieme partie, on etudie l'influence des differents traitements thermiques sur la ductilite a 600 deg. C, sur la presence du phenomene. Portevin-Le Chatelier, sur l'aspect de la cassure et sur la formation d'un compose c.f.c (a = 6,07 A) dont la presence s'accompagne d'une amelioration de la ductilite. Nous montrons l'existence d'une correlation entre ces differents parametres. Des etudes au microanalyseur a sonde electronique et par rayons X nous ont permis de voir comment le role des trois impuretes principales (Fe, Al et Si) est capital dans le mecanisme de la fragilite a chaud du beryllium de purete commerciale, le fer en solution etant responsable de l'interaction dislocation - impurete, l'aluminium et le silicium etant sous la forme d'un eutectique ternaire Be-Al-Si fondant a 430 deg. C. Au cours de traitements thermiques appropries le fer migre vers la phase liquide de l'eutectique, situe aux joints des grains, pour former an compose Be-Al-Fe c.f.c. a = 6,07 A. Ceci a deux consequences: la matrice devient plus deformable et la phase liquide disparait au profit d'un compose a haut point de fusion. Ces deux effets se traduisent par une importante amelioration de la ductilite a chaud du beryllium de purete commerciale. (auteur)

  15. Effect of impurities on the high-temperature brittleness of commercial grade beryllium; Influence des impuretes sur la fragilite a chaud du beryllium de purete commerciale

    Energy Technology Data Exchange (ETDEWEB)

    Mallen-Herrero, J.M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-05-15

    'un phenomene Portevin-Le Chatelier dans la zone de temperature ou la ductilite diminue, nous a permis de relier la fragilite a une interaction dislocation - impurete. Dans une deuxieme partie, on etudie l'influence des differents traitements thermiques sur la ductilite a 600 deg. C, sur la presence du phenomene. Portevin-Le Chatelier, sur l'aspect de la cassure et sur la formation d'un compose c.f.c (a = 6,07 A) dont la presence s'accompagne d'une amelioration de la ductilite. Nous montrons l'existence d'une correlation entre ces differents parametres. Des etudes au microanalyseur a sonde electronique et par rayons X nous ont permis de voir comment le role des trois impuretes principales (Fe, Al et Si) est capital dans le mecanisme de la fragilite a chaud du beryllium de purete commerciale, le fer en solution etant responsable de l'interaction dislocation - impurete, l'aluminium et le silicium etant sous la forme d'un eutectique ternaire Be-Al-Si fondant a 430 deg. C. Au cours de traitements thermiques appropries le fer migre vers la phase liquide de l'eutectique, situe aux joints des grains, pour former an compose Be-Al-Fe c.f.c. a = 6,07 A. Ceci a deux consequences: la matrice devient plus deformable et la phase liquide disparait au profit d'un compose a haut point de fusion. Ces deux effets se traduisent par une importante amelioration de la ductilite a chaud du beryllium de purete commerciale. (auteur)

  16. Some Non-Destructive Testing Methods Applicable to Sintered Materials; Quelques Methodes d'Essais Non Destructifs Applicables aux Materiaux Frittes; Nekotorye metody nedestruktivnykh ispytanii, primenimye k spechennym materialam; Algunos Metodos de Ensayo No Destructivo Aplicables a los Materiales Sinterizados

    Energy Technology Data Exchange (ETDEWEB)

    Labusca, Elena; Mirion, I.; Andreescu, N.; Alecu, M.; Biscoveanu, I. [Institut de Physique Atomique, Bucarest (Romania)

    1965-10-15

    solides frittes, a l'aide de la metallographie et de la microscopie electronique. Ces methodes mettent en evidence l'homogeneite de la structure, les dimensions et l'orientation des grains, la presence de defauts divers (inclusions, pores) et revolution meme du processus de frittage, y compris la formation des cristaux, la croissance granulaire, etc. Dans quelques cas, on peut combiner l'examen microscopique a des essais de microdurete. Cet examen de la structure microcristalline represente l'une des methodes principales de controle qualitatif des materiaux frittes, et ne peut etre remplace par aucun autre moyen d'investigation. 2. Controle du degre de consolidation, qui determine essentiellement la qualite des materiaux frittes. Ce controle est effectue par la mesure de quelques proprietes, telles que la conductibilite electrique et thermique, en correlation avec la densite, etant donne que la conductibilite des materiaux frittes est directement porportionnelle au degre de frittage. On a essaye aussi une methode adequate de controle de la porosite; on a obtenu des donnees experimentales interessantes, surtout au point de vue de la porosite libre, laquelle est susceptible aux inclusions gazeuses. Le memoire contient des donnees experimentales concernant l'application de ces methodes de controle a quelques materiaux frittes interessants pour la technologie nucleaire. (author) [Spanish] Teniendo en cuenta la estructura granular especifica de los materiales sinterizados, elaborados a partir de polvos, cuyo proceso de consolidacion se desarrolla en funcion del tratamiento de sinterizacion, los autores han estudiado algunos metodos para verificar el grado de sinterizacion y controlar ciertas propiedades. Entre los metodos no destructivos utilizados, se mencionan en la presente memoria: 1. Examen de la estructura cristalina de los solidos sinterizados por metalografia y microscopfa electronica. Estos metodos ponen de manifiesto el giado de homogeneidad estructural, la dimension

  17. Rapid instrument prototyping with open source hardware and software: Application to water quality in hypersaline estuaries.

    Science.gov (United States)

    Loose, B.; O'Shea, R.

    2016-02-01

    We describe the design and deployment of a water quality sonde that utilizes mobile phone networks for near-real time data telemetry. The REOL or Realtime Estuary Ocean Logger has the unique and valuable capability of logging data internally and simultaneously relaying the information to a webserver using a cellular modem. The internal circuitry consists of a GSM cellular modem, a microcontroller, and an SD card for data storage - these components are low cost, and backed up with circuit diagrams and programming libraries that are published under open source license. This configuration is versatile and is capable of reading instrument output from a broad spectrum of devices, including serial, TTL, analog voltage (0 - 5V), and analog current (typically 4-20 mA). We find the greatest challenges lie in development of smart software that is capable of handling the conditions brought on by this harsh environment. We have programmed the sonde to first determine whether it is submerged by water, and record the temperature on the electronics before deciding whether to telemeter measurements over the cellular network. The Google App EngineTM provides an interactive visualization platform. We have tested the REOL with a variety of water quality sensors. In the configuration described here, we use a thermistor, depth gauge and torroidal conductivity sensor to measure water temperature, water level and conductivity up to 200 mS/cm. The latter is necessary for studies in hypersaline estuaries, where porewater salinity can exceed 100 g/kg. We present data from two estuaries in West Africa and from a longer-term deployment in the Narragansett Bay, Rhode Island.

  18. Advertising on mobile applications

    OpenAIRE

    Sobolevsky, Alexandr

    2015-01-01

    The article analyzes the new method of mobile advertising. Advertising in mobile applications - a subspecies of mobile marketing, where advertising is distributed using mobile phones and smartphones. Ad placement is going on inside of applications and games for smartphones. It has a high potential due to the large number of mobile phone users (over 6.5 billion in 2013).

  19. Dilemmas in SEA application

    DEFF Research Database (Denmark)

    Lyhne, Ivar

    Dilemmas in SEA Application: The DK Energy SectorIvar Lyhne - lyhne@plan.aau.dk. Based on three years of collaborative research, this paper outlines dilemmas in the application of SEA in the strategic development of the Danish energy sector. The dilemmas are based on concrete examples from practice...

  20. Medical application of EPR

    International Nuclear Information System (INIS)

    Eichhoff, Uwe; Hoefer, Peter

    2015-01-01

    Selected applications of continuous-wave EPR in medicine are reviewed. This includes detection of reactive oxygen and nitrogen species, pH measurements and oxymetry. Applications of EPR imaging are demonstrated on selected examples and future developments to faster imaging methods are discussed

  1. Connected vehicle application : safety.

    Science.gov (United States)

    2015-01-01

    Connected vehicle safety applications are designed to increase situational awareness : and reduce or eliminate crashes through vehicle-to-infrastructure (V2I), vehicle-to-vehicle (V2V), and vehicle-to-pedestrian (V2P) data transmissions. Applications...

  2. Industrial applications and metallurgy

    International Nuclear Information System (INIS)

    Torres M, N.; Melendrez C, G.; Morales, F.L.

    1989-01-01

    From 1961 the use of nuclear energy in the industrial field in Colombia has a big advance. Today nuclear isotopes are used by private companies in this kind of application the Area of Industrial Applications and Metallurgy was the institution section that has trained and has transferred the technology needed for this purpose

  3. Energy applications of superconductivity

    International Nuclear Information System (INIS)

    Schneider, T.R.; Dale, S.J.; Wolf, S.M.

    1991-01-01

    Recent progress in developing high-temperature superconductors has enhanced the economic viability of energy applications such as power systems, motors, material processing and handling, refrigeration, transportation, and power electronics. This paper discusses the technical and economic issues associated with these applications

  4. Applications of Evolutionary Computation

    NARCIS (Netherlands)

    Mora, Antonio M.; Squillero, Giovanni; Di Chio, C; Agapitos, Alexandros; Cagnoni, Stefano; Cotta, Carlos; Fernández De Vega, F; Di Caro, G A; Drechsler, R.; Ekárt, A; Esparcia-Alcázar, Anna I.; Farooq, M; Langdon, W B; Merelo-Guervós, J.J.; Preuss, M; Richter, O.-M.H.; Silva, Sara; Sim$\\$~oes, A; Squillero, Giovanni; Tarantino, Ernesto; Tettamanzi, Andrea G B; Togelius, J; Urquhart, Neil; Uyar, A S; Yannakakis, G N; Smith, Stephen L; Caserta, Marco; Ramirez, Adriana; Voß, Stefan; Squillero, Giovanni; Burelli, Paolo; Mora, Antonio M.; Squillero, Giovanni; Jan, Mathieu; Matthias, M; Di Chio, C; Agapitos, Alexandros; Cagnoni, Stefano; Cotta, Carlos; Fernández De Vega, F; Di Caro, G A; Drechsler, R.; Ekárt, A; Esparcia-Alcázar, Anna I.; Farooq, M; Langdon, W B; Merelo-Guervós, J.J.; Preuss, M; Richter, O.-M.H.; Silva, Sara; Sim$\\$~oes, A; Squillero, Giovanni; Tarantino, Ernesto; Tettamanzi, Andrea G B; Togelius, J; Urquhart, Neil; Uyar, A S; Yannakakis, G N; Caserta, Marco; Ramirez, Adriana; Voß, Stefan; Squillero, Giovanni; Burelli, Paolo; Esparcia-Alcazar, Anna I; Silva, Sara; Agapitos, Alexandros; Cotta, Carlos; De Falco, Ivanoe; Cioppa, Antonio Della; Diwold, Konrad; Ekart, Aniko; Tarantino, Ernesto; Vega, Francisco Fernandez De; Burelli, Paolo; Sim, Kevin; Cagnoni, Stefano; Simoes, Anabela; Merelo, J.J.; Urquhart, Neil; Haasdijk, Evert; Zhang, Mengjie; Squillero, Giovanni; Eiben, A E; Tettamanzi, Andrea G B; Glette, Kyrre; Rohlfshagen, Philipp; Schaefer, Robert; Caserta, Marco; Ramirez, Adriana; Voß, Stefan

    2015-01-01

    The application of genetic and evolutionary computation to problems in medicine has increased rapidly over the past five years, but there are specific issues and challenges that distinguish it from other real-world applications. Obtaining reliable and coherent patient data, establishing the clinical

  5. Application Security Automation

    Science.gov (United States)

    Malaika, Majid A.

    2011-01-01

    With today's high demand for online applications and services running on the Internet, software has become a vital component in our lives. With every revolutionary technology comes challenges unique to its characteristics; for online applications, security is one huge concern and challenge. Currently, there are several schemes that address…

  6. Engineering Adaptive Applications

    DEFF Research Database (Denmark)

    Dolog, Peter

    for a domain.In this book, we propose a new domain engineering framework which extends a development process of Web applications with techniques required when designing such adaptive customizable Web applications. The framework is provided with design abstractions which deal separately with information served...

  7. Modelling Foundations and Applications

    DEFF Research Database (Denmark)

    This book constitutes the refereed proceedings of the 8th European Conference on Modelling Foundations and Applications, held in Kgs. Lyngby, Denmark, in July 2012. The 20 revised full foundations track papers and 10 revised full applications track papers presented were carefully reviewed...

  8. Computer algebra applications

    International Nuclear Information System (INIS)

    Calmet, J.

    1982-01-01

    A survey of applications based either on fundamental algorithms in computer algebra or on the use of a computer algebra system is presented. Recent work in biology, chemistry, physics, mathematics and computer science is discussed. In particular, applications in high energy physics (quantum electrodynamics), celestial mechanics and general relativity are reviewed. (Auth.)

  9. Nanomaterials in biomedical applications

    DEFF Research Database (Denmark)

    Christiansen, Jesper de Claville; Potarniche, Catalina-Gabriela; Vuluga, Z.

    2011-01-01

    Advances in nano materials have lead to applications in many areas from automotive to electronics and medicine. Nano composites are a popular group of nano materials. Nanocomposites in medical applications provide novel solutions to common problems. Materials for implants, biosensors and drug del...

  10. Progressive Web applications

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    Progressive Web Applications are native-like applications running inside of a browser context. In my presentation I would like describe their characteristics, benchmarks and building process using a quick and simple case study example with focus on Service Workers api.

  11. Rayleigh reciprocity relations: Applications

    International Nuclear Information System (INIS)

    Lin Ju; Li Xiao-Lei; Wang Ning

    2016-01-01

    Classical reciprocity relations have wide applications in acoustics, from field representation to generalized optical theorem. In this paper we introduce our recent results on the applications and generalization of classical Rayleigh reciprocity relation: higher derivative reciprocity relations as a generalization of the classical one and a theoretical proof on the Green’s function retrieval from volume noises. (special topic)

  12. Database Application Schema Forensics

    Directory of Open Access Journals (Sweden)

    Hector Quintus Beyers

    2014-12-01

    Full Text Available The application schema layer of a Database Management System (DBMS can be modified to deliver results that may warrant a forensic investigation. Table structures can be corrupted by changing the metadata of a database or operators of the database can be altered to deliver incorrect results when used in queries. This paper will discuss categories of possibilities that exist to alter the application schema with some practical examples. Two forensic environments are introduced where a forensic investigation can take place in. Arguments are provided why these environments are important. Methods are presented how these environments can be achieved for the application schema layer of a DBMS. A process is proposed on how forensic evidence should be extracted from the application schema layer of a DBMS. The application schema forensic evidence identification process can be applied to a wide range of forensic settings.

  13. Geometry and its applications

    CERN Document Server

    Meyer, Walter J

    2006-01-01

    Meyer''s Geometry and Its Applications, Second Edition, combines traditional geometry with current ideas to present a modern approach that is grounded in real-world applications. It balances the deductive approach with discovery learning, and introduces axiomatic, Euclidean geometry, non-Euclidean geometry, and transformational geometry. The text integrates applications and examples throughout and includes historical notes in many chapters. The Second Edition of Geometry and Its Applications is a significant text for any college or university that focuses on geometry''s usefulness in other disciplines. It is especially appropriate for engineering and science majors, as well as future mathematics teachers.* Realistic applications integrated throughout the text, including (but not limited to): - Symmetries of artistic patterns- Physics- Robotics- Computer vision- Computer graphics- Stability of architectural structures- Molecular biology- Medicine- Pattern recognition* Historical notes included in many chapters...

  14. Applications of ionizing radiations

    International Nuclear Information System (INIS)

    2014-01-01

    Developments in standard applications and brand new nuclear technologies, with high impact on the future of the agriculture, medicine, industry and the environmental preservation. The Radiation Technology Center (CTR) mission is to apply the radiation and radioisotope technologies in Industry, Health, Agriculture, and Environmental Protection, expanding the scientific knowledge, improving human power resources, transferring technology, generating products and offering services for the Brazilian society. The CTR main R and D activities are in consonance with the IPEN Director Plan (2011-2013) and the Applications of Ionizing Radiation Program, with four subprograms: Irradiation of Food and Agricultural Products; Radiation and Radioisotopes Applications in Industry and Environment; Radioactive Sources and Radiation Applications in Human Health; and Radioactive Facilities and Equipment for the Applications of Nuclear Techniques

  15. GPU computing and applications

    CERN Document Server

    See, Simon

    2015-01-01

    This book presents a collection of state of the art research on GPU Computing and Application. The major part of this book is selected from the work presented at the 2013 Symposium on GPU Computing and Applications held in Nanyang Technological University, Singapore (Oct 9, 2013). Three major domains of GPU application are covered in the book including (1) Engineering design and simulation; (2) Biomedical Sciences; and (3) Interactive & Digital Media. The book also addresses the fundamental issues in GPU computing with a focus on big data processing. Researchers and developers in GPU Computing and Applications will benefit from this book. Training professionals and educators can also benefit from this book to learn the possible application of GPU technology in various areas.

  16. Applications of ionizing radiations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    Developments in standard applications and brand new nuclear technologies, with high impact on the future of the agriculture, medicine, industry and the environmental preservation. The Radiation Technology Center (CTR) mission is to apply the radiation and radioisotope technologies in Industry, Health, Agriculture, and Environmental Protection, expanding the scientific knowledge, improving human power resources, transferring technology, generating products and offering services for the Brazilian society. The CTR main R and D activities are in consonance with the IPEN Director Plan (2011-2013) and the Applications of Ionizing Radiation Program, with four subprograms: Irradiation of Food and Agricultural Products; Radiation and Radioisotopes Applications in Industry and Environment; Radioactive Sources and Radiation Applications in Human Health; and Radioactive Facilities and Equipment for the Applications of Nuclear Techniques.

  17. Stirling engine application study

    Science.gov (United States)

    Teagan, W. P.; Cunningham, D.

    1983-01-01

    A range of potential applications for Stirling engines in the power range from 0.5 to 5000 hp is surveyed. Over one hundred such engine applications are grouped into a small number of classes (10), with the application in each class having a high degree of commonality in technical performance and cost requirements. A review of conventional engines (usually spark ignition or Diesel) was then undertaken to determine the degree to which commercial engine practice now serves the needs of the application classes and to detemine the nature of the competition faced by a new engine system. In each application class the Stirling engine was compared to the conventional engines, assuming that objectives of ongoing Stirling engine development programs are met. This ranking process indicated that Stirling engines showed potential for use in all application classes except very light duty applications (lawn mowers, etc.). However, this potential is contingent on demonstrating much greater operating life and reliability than has been demonstrated to date by developmental Stirling engine systems. This implies that future program initiatives in developing Stirling engine systems should give more emphasis to life and reliability issues than has been the case in ongoing programs.

  18. OCT for industrial applications

    Science.gov (United States)

    Song, Guiju; Harding, Kevin

    2012-11-01

    Optical coherence tomography (OCT), as an interferometric method, has been studied as a distance ranger. As a technology capable of producing high-resolution, depth-resolved images of biological tissue, OCT had been widely used for the application of ophthalmology and has been commercialized in the market today. Enlightened by the emerging research interest in biomedical domain, the applications of OCT in industrial inspection were rejuvenated by a few groups to explore its potential for characterizing new materials, imaging or inspecting industrial parts as a service solution[3]. Benefiting from novel photonics components and devices, the industrial application of the older concepts in OCT can be re-visited with respect to the unique performance and availability. Commercial OCT developers such as Michelson Diagnostics (MDL; Orpington, U.K.) and Thorlabs (Newton, NJ) are actively exploring the application of OCT to industrial applications and they have outlined meaningful path toward the metrology application in emerging industry[3]. In this chapter, we will introduce the fundamental concepts of OCT and discuss its current and potential industrial applications.

  19. The application of RFQs

    International Nuclear Information System (INIS)

    Schempp, A.

    1992-01-01

    The Radio Frequency Quadrupole Accelerator (RFQ) has found wide application, not only as the preinjector linac for new high energy light ion accelerators but also in a variety of other projects. Progress in development has made ion linacs practical for medical and industrial applications including radiation therapy, isotope and neutron production, material modification and ion beam diagnostic. The paper discusses various projects together with applications in science where RFQs serve as stand-alone tools, for example for the calibration of detectors, as decelerators or as small compact beam sources for atomic physics and materials research. (Author) 7 figs., 40 refs

  20. Lift application development cookbook

    CERN Document Server

    Garcia, Gilberto T

    2013-01-01

    Lift Application Development Cookbook contains practical recipes on everything you will need to create secure web applications using this amazing framework.The book first teaches you basic topics such as starting a new application and gradually moves on to teach you advanced topics to achieve a certain task. Then, it explains every step in detail so that you can build your knowledge about how things work.This book is for developers who have at least some basic knowledge about Scala and who are looking for a functional, secure, and modern web framework. Prior experience with HTML and JavaScript

  1. Biomedical applications of polymers

    CERN Document Server

    Gebelein, C G

    1991-01-01

    The biomedical applications of polymers span an extremely wide spectrum of uses, including artificial organs, skin and soft tissue replacements, orthopaedic applications, dental applications, and controlled release of medications. No single, short review can possibly cover all these items in detail, and dozens of books andhundreds of reviews exist on biomedical polymers. Only a few relatively recent examples will be cited here;additional reviews are listed under most of the major topics in this book. We will consider each of the majorclassifications of biomedical polymers to some extent, inclu

  2. Underground engineering applications

    Energy Technology Data Exchange (ETDEWEB)

    Nordyke, M D [Lawrence Radiation Laboratory, Livermore, CA (United States)

    1969-07-01

    Developments of any underground engineering application utilizing nuclear explosives involve answering the same questions one encounters in any new area of technology: What are the characteristics of the new tool? How is it applicable to the job to be done? Is it safe to use? and, most importantly, is its use economically acceptable? The many facets of the answers to these questions will be explored. The general types of application presently under consideration will also be reviewed, with particular emphasis on those specific projects actively being worked on by commercial interests and by the U.S. Atomic Energy Commission. (author)

  3. Excimer laser applications

    International Nuclear Information System (INIS)

    Fantoni, R.

    1988-01-01

    This lecture deals with laser induced material photoprocessing, especially concerning those processes which are initiated by u.v. lasers (mostly excimer laser). Advantages of using the u.v. radiation emitted by excimer lasers, both in photophysical and photochemical processes of different materials, are discussed in detail. Applications concerning microelectronics are stressed with respect to other applications in different fields (organic chemistry, medicine). As further applications of excimer lasers, main spectroscopic techniques for ''on line'' diagnostics which employ excimer pumped dye lasers, emitting tunable radiation in the visible and near u.v. are reviewed

  4. Android Applications Security

    Directory of Open Access Journals (Sweden)

    Paul POCATILU

    2011-01-01

    Full Text Available The use of smartphones worldwide is growing very fast and also the malicious attacks have increased. The mobile security applications development keeps the pace with this trend. The paper presents the vulnerabilities of mobile applications. The Android applications and devices are analyzed through the security perspective. The usage of restricted API is also presented. The paper also focuses on how users can prevent these malicious attacks and propose some prevention measures, including the architecture of a mobile security system for Android devices.

  5. Handbook of satellite applications

    CERN Document Server

    Madry, Scott; Camacho-Lara, Sergio

    2017-01-01

    The first edition of this ground breaking reference work was the most comprehensive reference source available about the key aspects of the satellite applications field. This updated second edition covers the technology, the markets, applications and regulations related to satellite telecommunications, broadcasting and networking—including civilian and military systems; precise satellite navigation and timing networks (i.e. GPS and others); remote sensing and meteorological satellite systems. Created under the auspices of the International Space University based in France, this brand new edition is now expanded to cover new innovative small satellite constellations, new commercial launching systems, innovation in military application satellites and their acquisition, updated appendices, a useful glossary and more.

  6. Professional Tizen application development

    CERN Document Server

    Jaygarl, HoJun; Kim, YoonSoo; Choi, Eunyoung; Bradwick, Kevin; Lansdell

    2014-01-01

    Create powerful, marketable applications with Tizen for the smartphone and beyond  Tizen is the only platform designed for multiple device categories that is HTML5-centric and entirely open source. Written by experts in the field, this comprehensive guide includes chapters on both web and native application development, covering subjects such as location and social features, advanced UIs, animations, sensors and multimedia. This book is a comprehensive resource for learning how to develop Tizen web and native applications that are polished, bug-free and ready to sell on a range of smart dev

  7. Underground engineering applications

    International Nuclear Information System (INIS)

    Nordyke, M.D.

    1969-01-01

    Developments of any underground engineering application utilizing nuclear explosives involve answering the same questions one encounters in any new area of technology: What are the characteristics of the new tool? How is it applicable to the job to be done? Is it safe to use? and, most importantly, is its use economically acceptable? The many facets of the answers to these questions will be explored. The general types of application presently under consideration will also be reviewed, with particular emphasis on those specific projects actively being worked on by commercial interests and by the U.S. Atomic Energy Commission. (author)

  8. Mobile Application Recommender System

    OpenAIRE

    Davidsson, Christoffer

    2010-01-01

    With the amount of mobile applications available increasing rapidly, users have to put a lot of effort into finding applications of interest. The purpose of this thesis is to investigate how to aid users in the process of discovering new mobile applications by providing them with recommendations. A prototype system is then built as a proof-of-concept. The work of the thesis is divided into three phases where the aim of the first phase is to study related work and related systems to identify p...

  9. Professional Cocoa Application Security

    CERN Document Server

    Lee, Graham J

    2010-01-01

    The first comprehensive security resource for Mac and iPhone developers. The Mac platform is legendary for security, but consequently, Apple developers have little appropriate security information available to help them assure that their applications are equally secure. This Wrox guide provides the first comprehensive go-to resource for Apple developers on the available frameworks and features that support secure application development.: While Macs are noted for security, developers still need to design applications for the Mac and the iPhone with security in mind; this guide offers the first

  10. Developing Large Web Applications

    CERN Document Server

    Loudon, Kyle

    2010-01-01

    How do you create a mission-critical site that provides exceptional performance while remaining flexible, adaptable, and reliable 24/7? Written by the manager of a UI group at Yahoo!, Developing Large Web Applications offers practical steps for building rock-solid applications that remain effective even as you add features, functions, and users. You'll learn how to develop large web applications with the extreme precision required for other types of software. Avoid common coding and maintenance headaches as small websites add more pages, more code, and more programmersGet comprehensive soluti

  11. Superconductivity and its application

    International Nuclear Information System (INIS)

    Spadoni, M.

    1988-01-01

    This paper, after a short introduction to superconductivity and to multifilamentary superconducting composites is aiming to review the state of the art and the future perspective of some of the applications of the superconducting materials. The main interest is focussed to large scale applications like, for istance, magnets for accelerators or fusion reactors, superconducting system for NMR thomography, etc. A short paragraph is dedicated to applications for high sensitivity instrumentation. The paper is then concluded by some considerations about the potentialities of the newly discovered high critical temperature materials

  12. Express web application development

    CERN Document Server

    Yaapa, Hage

    2013-01-01

    Express Web Application Development is a practical introduction to learning about Express. Each chapter introduces you to a different area of Express, using screenshots and examples to get you up and running as quickly as possible.If you are looking to use Express to build your next web application, ""Express Web Application Development"" will help you get started and take you right through to Express' advanced features. You will need to have an intermediate knowledge of JavaScript to get the most out of this book.

  13. Application of expert systems

    Energy Technology Data Exchange (ETDEWEB)

    Basden, A

    1983-11-01

    This article seeks to bring together a number of issues relevant to the application of expert systems by discussing their advantages and limitations, their roles and benefits, and the influence that real-life applications might have on the design of expert systems software. Part of the expert systems strategy of one major chemical company is outlined. Because it was in constructing one particular expert system that many of these issues became important this system is described briefly at the start of the paper and used to illustrate much of the later discussion. It is of the plausible-inference type and has application in the field of materials engineering. 22 references.

  14. Biomaterials and therapeutic applications

    Science.gov (United States)

    Ferraro, Angelo

    2016-03-01

    A number of organic and inorganic, synthetic or natural derived materials have been classified as not harmful for the human body and are appropriate for medical applications. These materials are usually named biomaterials since they are suitable for introduction into living human tissues of prosthesis, as well as for drug delivery, diagnosis, therapies, tissue regeneration and many other clinical applications. Recently, nanomaterials and bioabsorbable polymers have greatly enlarged the fields of application of biomaterials attracting much more the attention of the biomedical community. In this review paper I am going to discuss the most recent advances in the use of magnetic nanoparticles and biodegradable materials as new biomedical tools.

  15. Building Social Web Applications

    CERN Document Server

    Bell, Gavin

    2009-01-01

    Building a web application that attracts and retains regular visitors is tricky enough, but creating a social application that encourages visitors to interact with one another requires careful planning. This book provides practical solutions to the tough questions you'll face when building an effective community site -- one that makes visitors feel like they've found a new home on the Web. If your company is ready to take part in the social web, this book will help you get started. Whether you're creating a new site from scratch or reworking an existing site, Building Social Web Applications

  16. Professional mobile application development

    CERN Document Server

    McWherter, Jeff

    2012-01-01

    Create applications for all major smartphone platforms Creating applications for the myriad versions and varieties of mobile phone platforms on the market can be daunting to even the most seasoned developer. This authoritative guide is written in such as way that it takes your existing skills and experience and uses that background as a solid foundation for developing applications that cross over between platforms, thereby freeing you from having to learn a new platform from scratch each time. Concise explanations walk you through the tools and patterns for developing for all the mobile platfo

  17. User Types in Online Applications

    Directory of Open Access Journals (Sweden)

    Ion IVAN

    2011-08-01

    Full Text Available Online applications are presented in the context of information society. Online applications characteristics are analyzed. Quality characteristics are presented in relation to online applications users. Types of users for AVIO application are presented. Use cases for AVIO application are identified. The limitations of AVIO application are defined. Types of users in online applications are identified. The threedimensional matrix of access to the online application resources is built. The user type-oriented database is structured. Access management of the fields related to the database tables is analyzed. The classification of online applications users is done.

  18. Designing Adaptive Web Applications

    DEFF Research Database (Denmark)

    Dolog, Peter

    2008-01-01

    Learning system to study a discipline. In business to business interaction, different requirements and parameters of exchanged business requests might be served by different services from third parties. Such applications require certain intelligence and a slightly different approach to design. Adpative web......The unique characteristic of web applications is that they are supposed to be used by much bigger and diverse set of users and stakeholders. An example application area is e-Learning or business to business interaction. In eLearning environment, various users with different background use the e......-based applications aim to leave some of their features at the design stage in the form of variables which are dependent on several criteria. The resolution of the variables is called adaptation and can be seen from two perspectives: adaptation by humans to the changed requirements of stakeholders and dynamic system...

  19. Nanobiomaterials development and applications

    CERN Document Server

    Papaefthymiou-Davis, Georgia C

    2013-01-01

    Nanomaterials in Nanobiotechnologies: Preparation, Characterization, and ApplicationsBio-Inspired Magnetic NanoparticlesGeorgia C. Papaefthymiou and Eamonn DevlinNanoparticles for BioimagingHye Sun Park and Yong Taik LimBiomedical Applications of Dendrimer Porphyrin or PhthalocyanineWoo-Dong Jang and Won-Gun KohPolymeric Nanoparticles in Cancer TherapyHeebeom Koo, Ji Young Yhee, Ick Chan Kwon, Kwangmeyung Kim, and Ramesh SubbiahCarbon Nanotube BioconjugatesMonica Samal, Dong Kee Yi, and Shashadhar SamalBiocatalytic NanosystemsJaehong Lim and Su Seong LeeMagnetically Induced Hyperthermia for Biomedical ApplicationsMichael Fardis, Ioannis Rabias, Georgios Diamantopoulos, Eleni Karakosta, Danai Tsitrouli, Vassilios Tzitzios, and Georgios PapavassiliouSoft Block Nanobuilding: New Preparation Routes of Soft Nanomaterials Using BiomoleculesEngineered Biomolecules as NanomaterialsYun Jung Lee and Ki Tae NamNanomaterials and Bio-MEMS: Nano- and Microscale Hybridization of Materials and ApplicationsMicrofluidic-Based ...

  20. Pedal Application Errors

    Science.gov (United States)

    2012-03-01

    This project examined the prevalence of pedal application errors and the driver, vehicle, roadway and/or environmental characteristics associated with pedal misapplication crashes based on a literature review, analysis of news media reports, a panel ...

  1. Microtron for radiation applications

    International Nuclear Information System (INIS)

    Soni, H.C.; Ramamurthi, S.S.

    1993-01-01

    The electron accelerator called microtron is a powerful tool for research, medical and industrial applications which need electron beam in energy range of few tens of MeV. Either electron beam from microtron is directly used for radiation applications or electron beam is utilized to produce x-rays or neutrons which are eventually used for radiation applications. After considering the vast potential, lower cost, simpler construction and excellent quality of electron beam from microtron, it was decided to develop this machine at Centre for Advanced Technology (CAT). The microtrons in two standard models have been developed which will cover all the above mentioned applications except free electron lasers. The microtron of model 1 provides electron beam of 20 MeV, 15/30 mA and that of model 2 provides electron beam of 8/12 MeV, 50/30 mA. (author). 2 figs., 1 tab

  2. Applications of quantum chromodynamics

    International Nuclear Information System (INIS)

    Field, R.D.

    1979-01-01

    Perturbative application of the theory of Quantum Chromodynamics (QCQ) are examined and compared with experimental data. Particular emphasis is placed on understanding the similarities and differences between the QCD results and the expectations of the naive parton model

  3. Thermoluminescence and applications

    International Nuclear Information System (INIS)

    Rodrigues, G.V.

    1986-01-01

    The theory of thermoluminescent emission, the characteristics of main thermoluminescent phosphorus, and some applications are presented. The main thermoluminescent dosemeters used in dosimetry are related. (M.C.K.)

  4. Thermoluminescence and their applications

    International Nuclear Information System (INIS)

    Rodrigues, G.V.

    1986-01-01

    The theory involved in the phenomenon of thermoluminescence emission, the characteristics of the main thermoluminescent phosphorus and some of their applications are presented. Some of the main thermoluminescent dosemeters used in dosimetry are described. (M.C.K.) [pt

  5. BIOSENSORS FOR ENVIRONMENTAL APPLICATIONS

    Science.gov (United States)

    A review, with 19 references, is given on challenges and possible opportunities for the development of biosensors for environmental monitoring applications. The high cost and slow turnaround times typically associated with the measurement of regulated pollutants clearly indicates...

  6. Nuclear Technology applications

    International Nuclear Information System (INIS)

    Cibils Machado, W. E- mail: wrcibils@adinet.com.uy

    2002-01-01

    The present work tries on the applications of the nuclear technology in the life daily, such as agriculture and feeding, human health, industry, non destructive essays, isotopic hydrology, and the nuclear power stations for electricity production and radioisotopes production

  7. Evolution of Mobile Applications

    Directory of Open Access Journals (Sweden)

    Phongtraychack Anachack

    2018-01-01

    Full Text Available Currently, we can see the rapid evolution of mobile technology, which involves mobile communication, mobile hardware, and mobile software. Features of mobile phones largely depend on software. In contemporary information and communication age [1–4], mobile application is one of the most concerned and rapidly developing areas. At the same time, the development of mobile application undergoes great changes with the introduction of new software, service platforms and software development kits (SDK. These changes lead to appearance of many new service platforms such as Google with Android and Apple with iOS. This article presents the information about the evolution of mobile application, gives some statistical data on the past and present situation, demonstrates how individual users of mobile devices can benefit, and shows how mobile applications affect society from the ethical perspective.

  8. Thermal Cameras and Applications

    DEFF Research Database (Denmark)

    Gade, Rikke; Moeslund, Thomas B.

    2014-01-01

    Thermal cameras are passive sensors that capture the infrared radiation emitted by all objects with a temperature above absolute zero. This type of camera was originally developed as a surveillance and night vision tool for the military, but recently the price has dropped, significantly opening up...... a broader field of applications. Deploying this type of sensor in vision systems eliminates the illumination problems of normal greyscale and RGB cameras. This survey provides an overview of the current applications of thermal cameras. Applications include animals, agriculture, buildings, gas detection......, industrial, and military applications, as well as detection, tracking, and recognition of humans. Moreover, this survey describes the nature of thermal radiation and the technology of thermal cameras....

  9. Thermodynamics foundations and applications

    CERN Document Server

    Gyftopoulos, Elias P

    2005-01-01

    Designed by two MIT professors, this authoritative text discusses basic concepts and applications in detail, emphasizing generality, definitions, and logical consistency. More than 300 solved problems cover realistic energy systems and processes.

  10. Wordpress web application development

    CERN Document Server

    Ratnayake, Rakhitha Nimesh

    2015-01-01

    This book is intended for WordPress developers and designers who want to develop quality web applications within a limited time frame and for maximum profit. Prior knowledge of basic web development and design is assumed.

  11. Applications of decelerated ions

    International Nuclear Information System (INIS)

    Johnson, B.M.

    1985-03-01

    Many facilities whose sole purpose had been to accelerate ion beams are now becoming decelerators as well. The development and current status of accel-decel operations is reviewed here. Applications of decelerated ions in atomic physics experiments are discussed

  12. Applications of Piezoelectric Ceramics

    Indian Academy of Sciences (India)

    Applications of Piezoelectric Ceramics. Piezoelectric Actuators. Nano and Micropositioners. Vibration Control Systems. Computer Printers. Piezoelectric Transformers,Voltage Generators, Spark Plugs, Ultrasonic Motors,. Ultrasonic Generators and Sensors. Sonars, Medical Diagnostic. Computer Memories. NVFRAM ...

  13. Engineering Adaptive Web Applications

    DEFF Research Database (Denmark)

    Dolog, Peter

    2007-01-01

    suit the user profile the most. This paper summarizes the domain engineering framework for such adaptive web applications. The framework provides guidelines to develop adaptive web applications as members of a family. It suggests how to utilize the design artifacts as knowledge which can be used......Information and services on the web are accessible for everyone. Users of the web differ in their background, culture, political and social environment, interests and so on. Ambient intelligence was envisioned as a concept for systems which are able to adapt to user actions and needs....... With the growing amount of information and services, the web applications become natural candidates to adopt the concepts of ambient intelligence. Such applications can deal with divers user intentions and actions based on the user profile and can suggest the combination of information content and services which...

  14. Special functions & their applications

    CERN Document Server

    Lebedev, N N

    1972-01-01

    Famous Russian work discusses the application of cylinder functions and spherical harmonics; gamma function; probability integral and related functions; Airy functions; hyper-geometric functions; more. Translated by Richard Silverman.

  15. Capital Projects Application (CPA)

    Data.gov (United States)

    General Services Administration — Capital Projects application (CPA) provides users with the ability to maintain project related financial data for Budget Activity (BA) 51, 55, 64, 01, 02, 03, 04....

  16. Electronic applications presentation

    Science.gov (United States)

    Grants.gov requirement effective February 17, 2015. All initial applications submitted for competitiveawards based on solicitations issued on or after February 17, 2015 must be submitted to EPAelectronically through Grants.gov.

  17. Neutron sources and applications

    Energy Technology Data Exchange (ETDEWEB)

    Price, D.L. [ed.] [Argonne National Lab., IL (United States); Rush, J.J. [ed.] [National Inst. of Standards and Technology, Gaithersburg, MD (United States)

    1994-01-01

    Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications.

  18. Applications of Clustering

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Applications of Clustering. Biology – medical imaging, bioinformatics, ecology, phylogenies problems etc. Market research. Data Mining. Social Networks. Any problem measuring similarity/correlation. (dimensions represent different parameters)

  19. Food Applications and Regulation

    Science.gov (United States)

    Gálvez, Antonio; Abriouel, Hikmate; Omar, Nabil Ben; Lucas, Rosario

    This chapter deals with food applications of bacteriocins. Regulatory issues on the different possibilities for incorporating bacteriocins as bioprotectants are discussed. Specific applications of bacteriocins or bacteriocin-producing strains are described for main food categories, including milk and dairy products, raw meats, ready-to-eat meat and poultry products, fermented meats, fish and fish products or fermented fish. The last section of the chapter deals with applications in foods and beverages derived from plant materials, such as raw vegetable foods, fruits and fruit juices, cooked food products, fermented vegetable foods and ­fermented beverages. Results obtained for application of bacteriocins in combination with other hurdles are also discussed for each specific case, with a special emphasis on novel food packaging and food-processing technologies, such as irradiation, pulsed electric field treatments or high hydrostatic pressure treatment.

  20. Neutron sources and applications

    International Nuclear Information System (INIS)

    Price, D.L.; Rush, J.J.

    1994-01-01

    Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications

  1. Magnesium motorcycle applications

    International Nuclear Information System (INIS)

    Jianyong Cao; Zonghe Zhang; Dongxia Xiang; Jun Wang

    2005-01-01

    Magnesium, the lightest engineering structural metal, has been comprehensively used in castings of aviation and aerospace, communication and transportation, and IT components. This paper introduced the history, advantages and difficulties of magnesium castings for motorcycle application as well as its application state in China. It also indicated the production situation of magnesium motorcycle components in CQMST and difficulties need to overcome for further development. (orig.)

  2. Applications of Genetic Programming

    DEFF Research Database (Denmark)

    Gaunholt, Hans; Toma, Laura

    1996-01-01

    In this report a study of genetic programming (GP) has been performed with respect to a number of applications such as Symbolic function regression, Solving Symbolic Differential Equations, Image encoding, the ant problem etc.......In this report a study of genetic programming (GP) has been performed with respect to a number of applications such as Symbolic function regression, Solving Symbolic Differential Equations, Image encoding, the ant problem etc....

  3. Applications for alliform carbon

    Energy Technology Data Exchange (ETDEWEB)

    Gogotsi, Yury; Mochalin, Vadym; McDonough, IV, John Kenneth; Simon, Patrice; Taberna, Pierre Louis

    2017-02-21

    This invention relates to novel applications for alliform carbon, useful in conductors and energy storage devices, including electrical double layer capacitor devices and articles incorporating such conductors and devices. Said alliform carbon particles are in the range of 2 to about 20 percent by weight, relative to the weight of the entire electrode. Said novel applications include supercapacitors and associated electrode devices, batteries, bandages and wound healing, and thin-film devices, including display devices.

  4. Applications of neutron irradiation

    International Nuclear Information System (INIS)

    Ito, Yasuo

    1999-01-01

    The present state of art of applications of neutron irradiation is overviewed taking neutron activation analysis, prompt gamma-ray analysis, fission/alpha track methods, boron neutron capture therapy as examples. What is common among them is that the technologies are nearly matured for wide use by non- nuclear scientists. But the environment around research reactors is not prospective. These applications should be encouraged by incorporating in the neutron science society. (author)

  5. Superconductivity and their applications

    OpenAIRE

    Roque, António; Sousa, Duarte M.; Fernão Pires, Vítor; Margato, Elmano

    2017-01-01

    Trabalho apresentado em International Conference on Renewable Energies and Power Quality (ICREPQ’17), 4 a 6 de Abril de 2017, Málaga, Espanha The research in the field of superconductivity has led to the synthesis of superconducting materials with features that allow you to expand the applicability of this kind of materials. Among the superconducting materials characteristics, the critical temperature of the superconductor is framing the range and type of industrial applications that can b...

  6. Mobile Augmented Reality Applications

    OpenAIRE

    Prochazka, David; Stencl, Michael; Popelka, Ondrej; Stastny, Jiri

    2011-01-01

    Augmented reality have undergone considerable improvement in past years. Many special techniques and hardware devices were developed, but the crucial breakthrough came with the spread of intelligent mobile phones. This enabled mass spread of augmented reality applications. However mobile devices have limited hardware capabilities, which narrows down the methods usable for scene analysis. In this article we propose an augmented reality application which is using cloud computing to enable using...

  7. Modular Mobile Application Design

    OpenAIRE

    Jim Hahn; Nathaniel Ryckman

    2012-01-01

    This article describes the development of the Minrva library app for Android phones. The decisions to build a native application with Java and use a modular design are discussed. The application includes five modules: catalog search, in-building navigation, a barcode scanning feature, and up to date notifications of circulating technology availability. A sixth module, Amazon recommendations, that is not included in the version of the app that was released is also discussed. The article also r...

  8. Accounting Applications---Introduction

    OpenAIRE

    Joshua Ronen

    1980-01-01

    Introduction to special issue on accounting applications. By publishing these papers together in one issue of Management Science we wish to accomplish the dual purpose of exposing management scientists to the application of their discipline to important accounting problems and of allowing management scientists and accountants to interact in areas of research and problem-solving, thus stimulating the interest of readers who are concerned with the problems of accounting.

  9. Technological laser application

    International Nuclear Information System (INIS)

    Shia, D.O.; Kollen, R.; Rods, U.

    1980-01-01

    Problems of the technological applications of lasers are stated in the popular form. Main requirements to a technological laser as well as problems arising in designing any system using lasers have been considered. Areas of the laser applications are described generally: laser treatment of materials, thermal treatment, welding, broach and drilling of holes, scribing, microtreatment and adjustment of resistors, material cutting, investigations into controlled thermonuclear fussion

  10. Applications of Nuclear Physics

    OpenAIRE

    Hayes, Anna C.

    2017-01-01

    Today the applications of nuclear physics span a very broad range of topics and fields. This review discusses a number of aspects of these applications, including selected topics and concepts in nuclear reactor physics, nuclear fusion, nuclear non-proliferation, nuclear-geophysics, and nuclear medicine. The review begins with a historic summary of the early years in applied nuclear physics, with an emphasis on the huge developments that took place around the time of World War II, and that und...

  11. Particles beams and applications

    International Nuclear Information System (INIS)

    Uzureau, J.L.

    1996-01-01

    This issue of the ''Chocs'' journal is devoted to particles beams used by the D.A.M. (Direction of Military Applications) and to their applications. The concerned beams are limited to those in an energy range from hundred of Kev to several Gev. Light ions (protons, deuterons, alpha) where it is easy to produce neutrons sources and heavy ions (from carbon to gold). (N.C.). 8 refs., 2 figs

  12. Technology Applications Team: Applications of aerospace technology

    Science.gov (United States)

    1993-01-01

    Highlights of the Research Triangle Institute (RTI) Applications Team activities over the past quarter are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. The authors gratefully acknowledge the contributions of many individuals to the RTI Technology Applications Team program. The time and effort contributed by managers, engineers, and scientists throughout NASA were essential to program success. Most important to the program has been a productive working relationship with the NASA Field Center Technology Utilization (TU) Offices. The RTI Team continues to strive for improved effectiveness as a resource to these offices. Industry managers, technical staff, medical researchers, and clinicians have been cooperative and open in their participation. The RTI Team looks forward to continuing expansion of its interaction with U.S. industry to facilitate the transfer of aerospace technology to the private sector.

  13. LCS Content Document Application

    Science.gov (United States)

    Hochstadt, Jake

    2011-01-01

    My project at KSC during my spring 2011 internship was to develop a Ruby on Rails application to manage Content Documents..A Content Document is a collection of documents and information that describes what software is installed on a Launch Control System Computer. It's important for us to make sure the tools we use everyday are secure, up-to-date, and properly licensed. Previously, keeping track of the information was done by Excel and Word files between different personnel. The goal of the new application is to be able to manage and access the Content Documents through a single database backed web application. Our LCS team will benefit greatly with this app. Admin's will be able to login securely to keep track and update the software installed on each computer in a timely manner. We also included exportability such as attaching additional documents that can be downloaded from the web application. The finished application will ease the process of managing Content Documents while streamlining the procedure. Ruby on Rails is a very powerful programming language and I am grateful to have the opportunity to build this application.

  14. Radioisotopes production and applications

    International Nuclear Information System (INIS)

    Dash, Ashutosh

    2015-01-01

    Application of radioisotopes for both medical and industrial applications constitutes one of the most important peaceful uses of atomic energy. The striking diffusion and the exciting perspective of radioisotope for a plethora of medical and industrial applications are mainly attributable to the penetrating and ionization properties of radiation emanating from radioisotopes. The revolutionary medical applications of radioisotopes for the diagnosis and treatment of a multitude of diseases are causing a rapid expansion of the nuclear medicine field. While the industrial uses of radioisotopes are not expanding as quickly, also require large amounts of radioisotopes. Production of radioisotopes is not only the first step, but also the most crucial for the success as well as sustainable growth of radioisotope applications. With the rapid growth and expanding areas of applications, the demands for isotopes have increased several folds. A number of radioisotopes of different physical half-life, energy of the particle or gamma emission, specific activity and chemistry are now regularly produced both at commercial centers as well as at selected nuclear science research institutes utilizing reactors and cyclotrons to meet the ever growing need

  15. Amorphous silicon solid-state detectors and their future application in medical X-ray imaging

    International Nuclear Information System (INIS)

    Spahn, M.; Alexander, J.; Gmeinwieser, J.

    1997-01-01

    With the goal of testing the new technology under clinical conditions, in a cooperation between Thomson Tubes Electroniques (Moirans, France) and the Siemens Medical Engineering Group the first a-Si detector prototypes have been developed. On the basis of these activities and together with another European partner the independent company Trixell S.A.S. was established. A technological prototype with a matrix size of 1k x 1k and a pixel size of 200 μm [4] was installed in 1995 in the Cardiology Department of the University Hospital in Freiburg (Germany). The system was designed to operate at 12.5 frames per seconds with full geometrical resolution and 25 frames per second with half the full geometrical resolution. In the clinical environment, both the high contrast and the good image impression, especially at cinematographic doses, was acknowledged. In this early stage of development, however, the signal-to-noise ratio was somewhat inferior to that of I.I.-TV systems at fluoroscopic doses. (orig.)

  16. Automated Inadvertent Intruder Application

    International Nuclear Information System (INIS)

    Koffman, Larry D.; Lee, Patricia L.; Cook, James R.; Wilhite, Elmer L.

    2008-01-01

    The Environmental Analysis and Performance Modeling group of Savannah River National Laboratory (SRNL) conducts performance assessments of the Savannah River Site (SRS) low-level waste facilities to meet the requirements of DOE Order 435.1. These performance assessments, which result in limits on the amounts of radiological substances that can be placed in the waste disposal facilities, consider numerous potential exposure pathways that could occur in the future. One set of exposure scenarios, known as inadvertent intruder analysis, considers the impact on hypothetical individuals who are assumed to inadvertently intrude onto the waste disposal site. Inadvertent intruder analysis considers three distinct scenarios for exposure referred to as the agriculture scenario, the resident scenario, and the post-drilling scenario. Each of these scenarios has specific exposure pathways that contribute to the overall dose for the scenario. For the inadvertent intruder analysis, the calculation of dose for the exposure pathways is a relatively straightforward algebraic calculation that utilizes dose conversion factors. Prior to 2004, these calculations were performed using an Excel spreadsheet. However, design checks of the spreadsheet calculations revealed that errors could be introduced inadvertently when copying spreadsheet formulas cell by cell and finding these errors was tedious and time consuming. This weakness led to the specification of functional requirements to create a software application that would automate the calculations for inadvertent intruder analysis using a controlled source of input parameters. This software application, named the Automated Inadvertent Intruder Application, has undergone rigorous testing of the internal calculations and meets software QA requirements. The Automated Inadvertent Intruder Application was intended to replace the previous spreadsheet analyses with an automated application that was verified to produce the same calculations and

  17. Computer Applications in Educational Audiology.

    Science.gov (United States)

    Mendel, Lisa Lucks; And Others

    1995-01-01

    This article provides an overview of how computer technologies can be used by educational audiologists. Computer technologies are classified into three categories: (1) information systems applications; (2) screening and diagnostic applications; and (3) intervention applications. (Author/DB)

  18. Quality attributes for mobile applications

    OpenAIRE

    Fernandes, João M.; Ferreira, André Leite

    2016-01-01

    A mobile application is a type of software application developed to run on a mobile device. The chapter discusses the main characteristics of mobile devices, since they have a great impact on mobile applications. It also presents the classification of mobile applications according to two main types: native and web-based applications. Finally, this chapter identifies the most relevant types of quality attributes for mobile applications. It shows that the relevant quality attributes for mobile ...

  19. Retirement Applicant Satisfaction Survey Results

    Data.gov (United States)

    Social Security Administration — This dataset contains information about the Retirement Applicant Survey (RAS). The survey measured satisfaction results with the retirement application process. The...

  20. Applications of Cell Microencapsulation.

    Science.gov (United States)

    Opara, Emmanuel C

    2017-01-01

    The goal of this chapter is to provide an overview of the different purposes for which the cell microencapsulation technology can be used. These include immunoisolation of non-autologous cells used for cell therapy; immobilization of cells for localized (targeted) delivery of therapeutic products to ablate, repair, or regenerate tissue; simultaneous delivery of multiple therapeutic agents in cell therapy; spatial compartmentalization of cells in complex tissue engineering; expansion of cells in culture; and production of different probiotics and metabolites for industrial applications. For each of these applications, specific examples are provided to illustrate how the microencapsulation technology can be utilized to achieve the purpose. However, successful use of the cell microencapsulation technology for whatever purpose will ultimately depend upon careful consideration for the choice of the encapsulating polymers, the method of fabrication (cross-linking) of the microbeads, which affects the permselectivity, the biocompatibility and the mechanical strength of the microbeads as well as environmental parameters such as temperature, humidity, osmotic pressure, and storage solutions.The various applications discussed in this chapter are illustrated in the different chapters of this book and where appropriate relevant images of the microencapsulation products are provided. It is hoped that this outline of the different applications of cell microencapsulation would provide a good platform for tissue engineers, scientists, and clinicians to design novel tissue constructs and products for therapeutic and industrial applications.

  1. Nonlinear Optics and Applications

    Science.gov (United States)

    Abdeldayem, Hossin A. (Editor); Frazier, Donald O. (Editor)

    2007-01-01

    Nonlinear optics is the result of laser beam interaction with materials and started with the advent of lasers in the early 1960s. The field is growing daily and plays a major role in emerging photonic technology. Nonlinear optics play a major role in many of the optical applications such as optical signal processing, optical computers, ultrafast switches, ultra-short pulsed lasers, sensors, laser amplifiers, and many others. This special review volume on Nonlinear Optics and Applications is intended for those who want to be aware of the most recent technology. This book presents a survey of the recent advances of nonlinear optical applications. Emphasis will be on novel devices and materials, switching technology, optical computing, and important experimental results. Recent developments in topics which are of historical interest to researchers, and in the same time of potential use in the fields of all-optical communication and computing technologies, are also included. Additionally, a few new related topics which might provoke discussion are presented. The book includes chapters on nonlinear optics and applications; the nonlinear Schrodinger and associated equations that model spatio-temporal propagation; the supercontinuum light source; wideband ultrashort pulse fiber laser sources; lattice fabrication as well as their linear and nonlinear light guiding properties; the second-order EO effect (Pockels), the third-order (Kerr) and thermo-optical effects in optical waveguides and their applications in optical communication; and, the effect of magnetic field and its role in nonlinear optics, among other chapters.

  2. Practical applications of phosphors

    CERN Document Server

    Yen, William M; Yamamoto, Hajime

    2006-01-01

    Drawn from the second edition of the best-selling Phosphor Handbook, Practical Applications of Phosphors outlines methods for the production of various phosphors and discusses a broad spectrum of applications. Beginning with methods for synthesis and related technologies, the book sets the stage by classifying and then explaining practical phosphors according to usage. It describes the operating principle and structure of phosphor devices and the phosphor characteristics required for a given device, then covers the manufacturing processes and characteristics of phosphors. The book discusses research and development currently under way on phosphors with potential for practical usage and touches briefly on phosphors that have played a historical role, but are no longer of practical use. It provides a comprehensive treatment of applications including lamps and cathode-ray tubes, x-ray and ionizing radiation, and for vacuum fluorescent and field emission displays and covers inorganic and organic electroluminescen...

  3. Radioisotope applications in industry

    International Nuclear Information System (INIS)

    Frevert, E.

    1983-03-01

    The practical applications of the isotope technique are reported and illustrated by examples of works of the Department of Isotope Application of the Austrian Research Centre Seibersdorf. First the field of process controlling device and controll is described, including thickness, density and moisture gauging, the estimation of coatings and material compounds, the location of material defects and the level control. After this a detailed description of all kinds of tracer investigations is given like measurements of flow rate, intermixture, distribution and volume, investigations of corrosion, wear and lubrication and locations of all kind. A short description of gas ionisation, sources of light and isotope batteries is mentioned. Finally a general view of the applications in the fields of chemistry, biology, agriculture and medicine and the most important of the Austrian law of protective screen and its enactment are given. (Author) [de

  4. Lie algebras and applications

    CERN Document Server

    Iachello, Francesco

    2015-01-01

    This course-based primer provides an introduction to Lie algebras and some of their applications to the spectroscopy of molecules, atoms, nuclei and hadrons. In the first part, it concisely presents the basic concepts of Lie algebras, their representations and their invariants. The second part includes a description of how Lie algebras are used in practice in the treatment of bosonic and fermionic systems. Physical applications considered include rotations and vibrations of molecules (vibron model), collective modes in nuclei (interacting boson model), the atomic shell model, the nuclear shell model, and the quark model of hadrons. One of the key concepts in the application of Lie algebraic methods in physics, that of spectrum generating algebras and their associated dynamic symmetries, is also discussed. The book highlights a number of examples that help to illustrate the abstract algebraic definitions and includes a summary of many formulas of practical interest, such as the eigenvalues of Casimir operators...

  5. Discrete mathematics with applications

    CERN Document Server

    Koshy, Thomas

    2003-01-01

    This approachable text studies discrete objects and the relationsips that bind them. It helps students understand and apply the power of discrete math to digital computer systems and other modern applications. It provides excellent preparation for courses in linear algebra, number theory, and modern/abstract algebra and for computer science courses in data structures, algorithms, programming languages, compilers, databases, and computation.* Covers all recommended topics in a self-contained, comprehensive, and understandable format for students and new professionals * Emphasizes problem-solving techniques, pattern recognition, conjecturing, induction, applications of varying nature, proof techniques, algorithm development and correctness, and numeric computations* Weaves numerous applications into the text* Helps students learn by doing with a wealth of examples and exercises: - 560 examples worked out in detail - More than 3,700 exercises - More than 150 computer assignments - More than 600 writing projects*...

  6. Applications of stable isotopes

    International Nuclear Information System (INIS)

    Gregg, C.T.

    1977-01-01

    Clinical applications include the galactose breath test which consists of oral administration of 13 C-labeled galactose and measurement of the 13 C content of respired CO 2 as a function of time in patients with cirrhotic livers for diagnosis of liver dysfunction. Another application was the breath test to study glucose metabolism in children. Respired 13 CO 2 from ingested glucose- 13 C was measured for normal and diabetic children. Studies on mice in which 60 percent of the body carbon was replaced with 13 C failed to show significant effects of the isotope. Studies on biochemical applications include nuclear magnetic resonance studies of 13 C-labeled amino acids from Chlorella pyrenoidosa; studies on 15 N nmr spectra of arginine-guanidino- 13 C-2,3-- 15 N 2 as a function of pH; and isolation of fatty acids from algae

  7. Elasticity theory and applications

    CERN Document Server

    Saada, Adel S; Hartnett, James P; Hughes, William F

    2013-01-01

    Elasticity: Theory and Applications reviews the theory and applications of elasticity. The book is divided into three parts. The first part is concerned with the kinematics of continuous media; the second part focuses on the analysis of stress; and the third part considers the theory of elasticity and its applications to engineering problems. This book consists of 18 chapters; the first of which deals with the kinematics of continuous media. The basic definitions and the operations of matrix algebra are presented in the next chapter, followed by a discussion on the linear transformation of points. The study of finite and linear strains gradually introduces the reader to the tensor concept. Orthogonal curvilinear coordinates are examined in detail, along with the similarities between stress and strain. The chapters that follow cover torsion; the three-dimensional theory of linear elasticity and the requirements for the solution of elasticity problems; the method of potentials; and topics related to cylinders, ...

  8. Functional analysis and applications

    CERN Document Server

    Siddiqi, Abul Hasan

    2018-01-01

    This self-contained textbook discusses all major topics in functional analysis. Combining classical materials with new methods, it supplies numerous relevant solved examples and problems and discusses the applications of functional analysis in diverse fields. The book is unique in its scope, and a variety of applications of functional analysis and operator-theoretic methods are devoted to each area of application. Each chapter includes a set of problems, some of which are routine and elementary, and some of which are more advanced. The book is primarily intended as a textbook for graduate and advanced undergraduate students in applied mathematics and engineering. It offers several attractive features making it ideally suited for courses on functional analysis intended to provide a basic introduction to the subject and the impact of functional analysis on applied and computational mathematics, nonlinear functional analysis and optimization. It introduces emerging topics like wavelets, Gabor system, inverse pro...

  9. Superconductivity: materials and applications

    International Nuclear Information System (INIS)

    Duchateau, J.L.; Kircher, F.; Leveque, J.; Tixador, P.

    2008-01-01

    This digest paper presents the different types of superconducting materials: 1 - the low-TC superconductors: the multi-filament composite as elementary constituent, the world production of NbTi, the superconducting cables of the LHC collider and of the ITER tokamak; 2 - the high-TC superconductors: BiSrCaCuO (PIT 1G) ribbons and wires, deposited coatings; 3 - application to particle physics: the the LHC collider of the CERN, the LHC detectors; 4 - applications to thermonuclear fusion: Tore Supra and ITER tokamaks; 5 - NMR imaging: properties of superconducting magnets; 6 - applications in electrotechnics: cables, motors and alternators, current limiters, transformers, superconducting energy storage systems (SMES). (J.S.)

  10. Applications of interval computations

    CERN Document Server

    Kreinovich, Vladik

    1996-01-01

    Primary Audience for the Book • Specialists in numerical computations who are interested in algorithms with automatic result verification. • Engineers, scientists, and practitioners who desire results with automatic verification and who would therefore benefit from the experience of suc­ cessful applications. • Students in applied mathematics and computer science who want to learn these methods. Goal Of the Book This book contains surveys of applications of interval computations, i. e. , appli­ cations of numerical methods with automatic result verification, that were pre­ sented at an international workshop on the subject in EI Paso, Texas, February 23-25, 1995. The purpose of this book is to disseminate detailed and surveyed information about existing and potential applications of this new growing field. Brief Description of the Papers At the most fundamental level, interval arithmetic operations work with sets: The result of a single arithmetic operation is the set of all possible results as the o...

  11. Applications of photovoltaics

    International Nuclear Information System (INIS)

    Pearsall, N.

    1999-01-01

    The author points out that although photovoltaics can be used for generating electricity for the same applications as many other means of generation, they really come into their own where disadvantages associated with an intermittent unpredictable supply are not severe. The paper discusses the advantages and disadvantages to be taken into account when considering a photovoltaic power system. Five main applications, based on the system features, are listed and explained. They are: consumer, professional, rural electrification, building-integrated, centralised grid connected and space power. A brief history of the applications of photovoltaics is presented with statistical data on the growth of installed capacity since 1992. The developing market for photovoltaics is discussed together with how environmental issues have become a driver for development of building-integrated photovoltaics

  12. Optimized packings with applications

    CERN Document Server

    Pintér, János

    2015-01-01

    This volume presents a selection of case studies that address a substantial range of optimized object packings (OOP) and their applications. The contributing authors are well-recognized researchers and practitioners. The mathematical modelling and numerical solution aspects of each application case study are presented in sufficient detail. A broad range of OOP problems are discussed: these include various specific and non-standard container loading and object packing problems, as well as the stowing of hazardous and other materials on container ships, data centre resource management, automotive engineering design, space station logistic support, cutting and packing problems with placement constraints, the optimal design of LED street lighting, robust sensor deployment strategies, spatial scheduling problems, and graph coloring models and metaheuristics for packing applications. Novel points of view related to model development and to computational nonlinear, global, mixed integer optimization and heuristic st...

  13. Engineering Web Applications

    DEFF Research Database (Denmark)

    Casteleyn, Sven; Daniel, Florian; Dolog, Peter

    Nowadays, Web applications are almost omnipresent. The Web has become a platform not only for information delivery, but also for eCommerce systems, social networks, mobile services, and distributed learning environments. Engineering Web applications involves many intrinsic challenges due...... to their distributed nature, content orientation, and the requirement to make them available to a wide spectrum of users who are unknown in advance. The authors discuss these challenges in the context of well-established engineering processes, covering the whole product lifecycle from requirements engineering through...... design and implementation to deployment and maintenance. They stress the importance of models in Web application development, and they compare well-known Web-specific development processes like WebML, WSDM and OOHDM to traditional software development approaches like the waterfall model and the spiral...

  14. Plasmonics theory and applications

    CERN Document Server

    Shahbazyan, Tigran V

    2014-01-01

    This contributed volume summarizes recent theoretical developments in plasmonics and its applications in physics, chemistry, materials science, engineering, and medicine. It focuses on recent advances in several major areas of plasmonics including plasmon-enhanced spectroscopies, light scattering, many-body effects, nonlinear optics, and ultrafast dynamics. The theoretical and computational methods used in these investigations include electromagnetic calculations, density functional theory calculations, and nonequilibrium electron dynamics calculations. The book presents a comprehensive overview of these methods as well as their applications to various current problems of interest.

  15. Pump characteristics and applications

    CERN Document Server

    Volk, Michael

    2013-01-01

    Providing a wealth of information on pumps and pump systems, Pump Characteristics and Applications, Third Edition details how pump equipment is selected, sized, operated, maintained, and repaired. The book identifies the key components of pumps and pump accessories, introduces the basics of pump and system hydraulics as well as more advanced hydraulic topics, and details various pump types, as well as special materials on seals, motors, variable frequency drives, and other pump-related subjects. It uses example problems throughout the text, reinforcing the practical application of the formulae

  16. Application of stepping motor

    International Nuclear Information System (INIS)

    1980-10-01

    This book is divided into three parts, which is about practical using of stepping motor. The first part has six chapters. The contents of the first part are about stepping motor, classification of stepping motor, basic theory og stepping motor, characteristic and basic words, types and characteristic of stepping motor in hybrid type and basic control of stepping motor. The second part deals with application of stepping motor with hardware of stepping motor control, stepping motor control by microcomputer and software of stepping motor control. The last part mentions choice of stepping motor system, examples of stepping motor, measurement of stepping motor and practical cases of application of stepping motor.

  17. Experimental approaches and applications

    CERN Document Server

    Crasemann, Bernd

    1975-01-01

    Atomic Inner-Shell Processes, Volume II: Experimental Approaches and Applications focuses on the physics of atomic inner shells, with emphasis on experimental aspects including the use of radioactive atoms for studies of atomic transition probabilities. Surveys of modern techniques of electron and photon spectrometry are also presented, and selected practical applications of inner-shell processes are outlined. Comprised of six chapters, this volume begins with an overview of the general principles underlying the experimental techniques that make use of radioactive isotopes for inner-sh

  18. Superconductors and their applications

    Energy Technology Data Exchange (ETDEWEB)

    Fahlenbrach, H

    1976-05-01

    A brief introduction is given to the physics and technology of superconductivity, covering the proposed application of V/sub 3/Ga and Nb/sub 3/Sn which have a Tc at 20K and of Nb/sub 3/Ge (in thin layers) with a Tc of up to 23K. A table is given of the latest materials with Tc values around 11K, and high Hc values (up to 440 kA/cm), all based on molybdenum compounds. A brief discussion of practical applications includes a Hover vehicle with linear motor propulsion and low current usage in measuring and computing devices based on the Josephson effect.

  19. Medical applications of accelerators

    CERN Document Server

    Rossi, Sandro

    1998-01-01

    At Present, about five thousands accelerators are devoted to biomedical applications. They are mainly used in radiotherapy, research and medical radioisotopes production. In this framework oncological hadron-therapy deserves particular attention since it represents a field in rapid evolution thanks to the joint efforts of laboratories with long experiences in particle physics. It is the case of CERN where the design of an optimised synchrotron for medical applications has been pursued. These lectures present these activities with particular attention to the new developments which are scientifically interesting and/or economically promising.

  20. Gas solubilities widespread applications

    CERN Document Server

    Gerrard, William

    1980-01-01

    Gas Solubilities: Widespread Applications discusses several topics concerning the various applications of gas solubilities. The first chapter of the book reviews Henr's law, while the second chapter covers the effect of temperature on gas solubility. The third chapter discusses the various gases used by Horiuti, and the following chapters evaluate the data on sulfur dioxide, chlorine data, and solubility data for hydrogen sulfide. Chapter 7 concerns itself with solubility of radon, thoron, and actinon. Chapter 8 tackles the solubilities of diborane and the gaseous hydrides of groups IV, V, and

  1. Medical applications of cyclotrons

    International Nuclear Information System (INIS)

    Jean, R.; Fauchet, M.

    1978-01-01

    Isochronous cyclotrons used to accelerate different charged particles (protons, deuterons, alphas...) at variable energies, have important medical applications, for neutron teletherapy, in vivo or in vitro activation analysis or production of short-lived radioisotopes for nuclear medicine. The characteristics of the cyclotron presently available are described for these three applications (low energy 'compact' cyclotrons, cyclotrons of intermediate and high energies), and their advantages are discussed from the points of view of the medical requirements, the financial investments and the results obtained. (orig.) [de

  2. Modular Mobile Application Design

    Directory of Open Access Journals (Sweden)

    Jim Hahn

    2012-10-01

    Full Text Available This article describes the development of the Minrva library app for Android phones. The decisions to build a native application with Java and use a modular design are discussed. The application includes five modules: catalog search, in-building navigation, a barcode scanning feature, and up to date notifications of circulating technology availability. A sixth module, Amazon recommendations, that is not included in the version of the app that was released is also discussed. The article also reports on the findings of two rounds of usability testing and the plans for future development of the app.

  3. Location Based Application Availability

    Science.gov (United States)

    Naeem Akram, Raja; Markantonakis, Konstantinos; Mayes, Keith

    Smart cards are being integrated into a diverse range of industries: ranging from banking, telecom, transport, home/office access control to health and E-passport. Traditionally, cardholders are required to carry a smart card for each application. However, recent developments in the Near Field Communication (NFC) have renewed the interest in multiple applications for different services on a single device. This paper builds onto the NFC initiative and avoids the smart card ownership issues that hinder the adoption of such devices. The proposal integrates the Global Positioning System with the NFC in mobile phones to provide a ubiquitously and flexible service access model.

  4. Developing Web Applications

    CERN Document Server

    Moseley, Ralph

    2007-01-01

    Building applications for the Internet is a complex and fast-moving field which utilizes a variety of continually evolving technologies. Whether your perspective is from the client or server side, there are many languages to master - X(HTML), JavaScript, PHP, XML and CSS to name but a few. These languages have to work together cleanly, logically and in harmony with the systems they run on, and be compatible with any browsers with which they interact. Developing Web Applications presents script writing and good programming practice but also allows students to see how the individual technologi

  5. Optimization : insights and applications

    CERN Document Server

    Brinkhuis, Jan

    2005-01-01

    This self-contained textbook is an informal introduction to optimization through the use of numerous illustrations and applications. The focus is on analytically solving optimization problems with a finite number of continuous variables. In addition, the authors provide introductions to classical and modern numerical methods of optimization and to dynamic optimization. The book's overarching point is that most problems may be solved by the direct application of the theorems of Fermat, Lagrange, and Weierstrass. The authors show how the intuition for each of the theoretical results can be s

  6. Laravel application development blueprints

    CERN Document Server

    Kiliçdagi, Arda

    2013-01-01

    Follow along as we work together to build 10 different applications using Laravel 4. Since each chapter is devoted to the design of a different application, there is no need to read the book in any particular order. Instead, you can pick and choose the blueprints that are of most interest to you and dive right in.This book is for intermediate to advanced level PHP programmers who want to master Laravel. It's assumed that you will have some experience with PHP already. This book is also for those who are already using a different PHP framework and are looking for better solutions.

  7. Nanoelectronic device applications handbook

    CERN Document Server

    Morris, James E

    2013-01-01

    Nanoelectronic Device Applications Handbook gives a comprehensive snapshot of the state of the art in nanodevices for nanoelectronics applications. Combining breadth and depth, the book includes 68 chapters on topics that range from nano-scaled complementary metal-oxide-semiconductor (CMOS) devices through recent developments in nano capacitors and AlGaAs/GaAs devices. The contributors are world-renowned experts from academia and industry from around the globe. The handbook explores current research into potentially disruptive technologies for a post-CMOS world.These include: Nanoscale advance

  8. Tunable laser applications

    CERN Document Server

    Duarte, FJ

    2008-01-01

    Introduction F. J. Duarte Spectroscopic Applications of Tunable Optical Parametric Oscillators B. J. Orr, R. T. White, and Y. He Solid-State Dye Lasers Costela, I. García-Moreno, and R. Sastre Tunable Lasers Based on Dye-Doped Polymer Gain Media Incorporating Homogeneous Distributions of Functional Nanoparticles F. J. Duarte and R. O. James Broadly Tunable External-Cavity Semiconductor Lasers F. J. Duarte Tunable Fiber Lasers T. M. Shay and F. J. Duarte Fiber Laser Overview and Medical Applications

  9. Cluster analysis for applications

    CERN Document Server

    Anderberg, Michael R

    1973-01-01

    Cluster Analysis for Applications deals with methods and various applications of cluster analysis. Topics covered range from variables and scales to measures of association among variables and among data units. Conceptual problems in cluster analysis are discussed, along with hierarchical and non-hierarchical clustering methods. The necessary elements of data analysis, statistics, cluster analysis, and computer implementation are integrated vertically to cover the complete path from raw data to a finished analysis.Comprised of 10 chapters, this book begins with an introduction to the subject o

  10. Mixtures Estimation and Applications

    CERN Document Server

    Mengersen, Kerrie; Titterington, Mike

    2011-01-01

    This book uses the EM (expectation maximization) algorithm to simultaneously estimate the missing data and unknown parameter(s) associated with a data set. The parameters describe the component distributions of the mixture; the distributions may be continuous or discrete. The editors provide a complete account of the applications, mathematical structure and statistical analysis of finite mixture distributions along with MCMC computational methods, together with a range of detailed discussions covering the applications of the methods and features chapters from the leading experts on the subject

  11. Language Modelling for Collaborative Filtering: Application to Job Applicant Matching

    OpenAIRE

    Schmitt , Thomas; Gonard , François; Caillou , Philippe; Sebag , Michèle

    2017-01-01

    International audience; This paper addresses a collaborative retrieval problem , the recommendation of job ads to applicants. Specifically, two proprietary databases are considered. The first one focuses on the context of unskilled low-paid jobs/applicants; the second one focuses on highly qualified jobs/applicants. Each database includes the job ads and applicant resumes together with the collaborative filtering data recording the applicant clicks on job ads. The proposed approach, called LA...

  12. Distributed Parameter Modelling Applications

    DEFF Research Database (Denmark)

    Sales-Cruz, Mauricio; Cameron, Ian; Gani, Rafiqul

    2011-01-01

    and the development of a short-path evaporator. The oil shale processing problem illustrates the interplay amongst particle flows in rotating drums, heat and mass transfer between solid and gas phases. The industrial application considers the dynamics of an Alberta-Taciuk processor, commonly used in shale oil and oil...... the steady state, distributed behaviour of a short-path evaporator....

  13. Forensic Applications of LIBS

    Science.gov (United States)

    Hark, Richard R.; East, Lucille J.

    Forensic science is broadly defined as the application of science to matters of the law. Practitioners typically use multidisciplinary scientific techniques for the analysis of physical evidence in an attempt to establish or exclude an association between a suspect and the scene of a crime.

  14. Beaming teaching application

    DEFF Research Database (Denmark)

    Markovic, Milos; Madsen, Esben; Olesen, Søren Krarup

    2012-01-01

    BEAMING is a telepresence research project aiming at providing a multimodal interaction between two or more participants located at distant locations. One of the BEAMING applications allows a distant teacher to give a xylophone playing lecture to the students. Therefore, rendering of the xylophon...

  15. Medical applications of colloids

    CERN Document Server

    Matijevic, Egon

    2008-01-01

    The first book of its type on the medical and biomedical applications of colloids, although there are some related titles on different topicsDiscusses the effects of uniform particles in drug formulations and releaseEvaluates particle transport and deposition in the human body.

  16. Permit application modifications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This document contains the Permit Application Modifications for the Y-12 Industrial Landfill V site on the Oak Ridge Reservation. These modifications include the assessment of stability of the proposed Landfill V under static and loading conditions. Analyses performed include the general slope stability, veneer stability of the bottom liner and cover system, and a liquefaction potential assessment of the foundation soils.

  17. Applications Using AIRS Data

    Science.gov (United States)

    Ray, S. E.; Pagano, T. S.; Fetzer, E. J.; Lambrigtsen, B.; Olsen, E. T.; Teixeira, J.; Licata, S. J.; Hall, J. R.; Thompson, C. K.

    2015-12-01

    The Atmospheric Infrared Sounder (AIRS) on NASA's Aqua spacecraft has been returning daily global observations of Earth's atmospheric constituents and properties since 2002. With a 12-year data record and daily, global observations in near real-time, AIRS data can play a role in applications that fall under many of the NASA Applied Sciences focus areas. For vector-borne disease, research is underway using AIRS near surface retrievals to assess outbreak risk, mosquito incubation periods and epidemic potential for dengue fever, malaria, and West Nile virus. For drought applications, AIRS temperature and humidity data are being used in the development of new drought indicators and improvement in the understanding of drought development. For volcanic hazards, new algorithms using AIRS data are in development to improve the reporting of sulfur dioxide concentration, the burden and height of volcanic ash and dust, all of which pose a safety threat to aircraft. In addition, anomaly maps of many of AIRS standard products are being produced to help highlight "hot spots" and illustrate trends. To distribute it's applications imagery, AIRS is leveraging existing NASA data frameworks and organizations to facilitate archiving, distribution and participation in the BEDI. This poster will communicate the status of the applications effort for the AIRS Project and provide examples of new maps designed to best communicate the AIRS data.

  18. Microfluidics for medical applications

    NARCIS (Netherlands)

    van den Berg, Albert; van den Berg, A.; Segerink, L.I.; Segerink, Loes Irene; Unknown, [Unknown

    2015-01-01

    Lab-on-a-chip devices for point of care diagnostics have been present in clinics for several years now. Alongside their continual development, research is underway to bring the organs and tissue on-a-chip to the patient, amongst other medical applications of microfluidics. This book provides the

  19. Intertwiners and their applications

    International Nuclear Information System (INIS)

    Breitenecker, M.; Gruemm, H.R.

    1982-01-01

    The concept of 'intertwiner' - less familiar to physicists - appears to be quite useful for the applications of group theory. We present as examples the change of ground field as well as a basis-free version of the Wigner-Eckart theorem. (Author)

  20. Applications of QCD

    International Nuclear Information System (INIS)

    Landshoff, P.V.

    1983-01-01

    The author describes the application of quantum chromodynamics to deep inelastic lepton scattering, the Drell-Yan process, e + e - -annihilation, #betta##betta#-physics, large psub(T) processes, and wide angle quark-quark scattering. Furthermore higher order terms are considered. (HSI)

  1. Thermoelectricity: materials and applications

    International Nuclear Information System (INIS)

    Elberg, S.; Mathonnet, P.

    1975-01-01

    After a brief recall of the basic principles of thermoelectricity, the essential characteristics intervening in the different thermoelectric devices operating modes are defined. Properties of the materials the most used nowadays and performances of the apparatus that they allow to realize are indicated. Advantages and drawbacks of the principal applications in the form of electrical generators, refrigerators and heat pumps are pointed out [fr

  2. Biomedical applications engineering tasks

    Science.gov (United States)

    Laenger, C. J., Sr.

    1976-01-01

    The engineering tasks performed in response to needs articulated by clinicians are described. Initial contacts were made with these clinician-technology requestors by the Southwest Research Institute NASA Biomedical Applications Team. The basic purpose of the program was to effectively transfer aerospace technology into functional hardware to solve real biomedical problems.

  3. Application of ion exchangers

    International Nuclear Information System (INIS)

    Markhol, M.

    1985-01-01

    Existing methods of multi-element separation for radiochemical analysis are considered. The majority of existing methods is noted to be based on application of organic and inorganic ion exchangers. Distillation, coprecipitation, extraction as well as combination of the above methods are also used. Concrete flowsheets of multi-element separation are presented

  4. Business Applications of WAP.

    Science.gov (United States)

    van Steenderen, Margaret

    2002-01-01

    Explains the development of WAP (wireless application protocol), how it works, and what the major advantages and disadvantages are, especially when applied to the use of information. Topics include standardization; mobile communications; the effect of WAP on business tools, electronic commerce, and information services; consumers; corporate users;…

  5. Permit application modifications

    International Nuclear Information System (INIS)

    1995-11-01

    This document contains the Permit Application Modifications for the Y-12 Industrial Landfill V site on the Oak Ridge Reservation. These modifications include the assessment of stability of the proposed Landfill V under static and loading conditions. Analyses performed include the general slope stability, veneer stability of the bottom liner and cover system, and a liquefaction potential assessment of the foundation soils

  6. Knotoids, Braidoids and Applications

    Directory of Open Access Journals (Sweden)

    Neslihan Gügümcü

    2017-12-01

    Full Text Available This paper is an introduction to the theory of braidoids. Braidoids are geometric objects analogous to classical braids, forming a counterpart theory to the theory of knotoids. We introduce these objects and their topological equivalences, and we conclude with a potential application to the study of proteins.

  7. Learning analytics dashboard applications

    NARCIS (Netherlands)

    Verbert, K.; Duval, E.; Klerkx, J.; Govaerts, S.; Santos, J.L.

    2013-01-01

    This article introduces learning analytics dashboards that visualize learning traces for learners and teachers. We present a conceptual framework that helps to analyze learning analytics applications for these kinds of users. We then present our own work in this area and compare with 15 related

  8. Zirconia in biomedical applications.

    Science.gov (United States)

    Chen, Yen-Wei; Moussi, Joelle; Drury, Jeanie L; Wataha, John C

    2016-10-01

    The use of zirconia in medicine and dentistry has rapidly expanded over the past decade, driven by its advantageous physical, biological, esthetic, and corrosion properties. Zirconia orthopedic hip replacements have shown superior wear-resistance over other systems; however, risk of catastrophic fracture remains a concern. In dentistry, zirconia has been widely adopted for endosseous implants, implant abutments, and all-ceramic crowns. Because of an increasing demand for esthetically pleasing dental restorations, zirconia-based ceramic restorations have become one of the dominant restorative choices. Areas covered: This review provides an updated overview of the applications of zirconia in medicine and dentistry with a focus on dental applications. The MEDLINE electronic database (via PubMed) was searched, and relevant original and review articles from 2010 to 2016 were included. Expert commentary: Recent data suggest that zirconia performs favorably in both orthopedic and dental applications, but quality long-term clinical data remain scarce. Concerns about the effects of wear, crystalline degradation, crack propagation, and catastrophic fracture are still debated. The future of zirconia in biomedical applications will depend on the generation of these data to resolve concerns.

  9. Electron beam simulation applicators

    International Nuclear Information System (INIS)

    Purdy, J.A.

    1983-01-01

    A system for simulating electron beam treatment portals using low-temperature melting point alloy is described. Special frames having the same physical dimensions as the electron beam applicators used on the Varian Clinac 20 linear accelerator were designed and constructed

  10. Microcontroller for automation application

    Science.gov (United States)

    Cooper, H. W.

    1975-01-01

    The description of a microcontroller currently being developed for automation application was given. It is basically an 8-bit microcomputer with a 40K byte random access memory/read only memory, and can control a maximum of 12 devices through standard 15-line interface ports.

  11. Star Products and Applications

    OpenAIRE

    Iida, Mari; Yoshioka, Akira

    2010-01-01

    Star products parametrized by complex matrices are defined. Especially commutative associative star products are treated, and star exponentials with respect to these star products are considered. Jacobi's theta functions are given as infinite sums of star exponentials. As application, several concrete identities are obtained by properties of the star exponentials.

  12. Technology and applications

    International Nuclear Information System (INIS)

    Bogdany, J.; Vesztergombi, G.

    1994-07-01

    The workshop on Parallel Processing, Technology and Applications, held February 10-11, Budapest, Hungary, covered a variety of topics on computer data processing and parallel computing. One of the 17 presentations discussed the need for massively parallel processing in support of future high energy experiments

  13. Assessment Applications of Ontologies.

    Science.gov (United States)

    Chung, Gregory K. W. K.; Niemi, David; Bewley, William L.

    This paper discusses the use of ontologies and their applications to assessment. An ontology provides a shared and common understanding of a domain that can be communicated among people and computational systems. The ontology captures one or more experts' conceptual representation of a domain expressed in terms of concepts and the relationships…

  14. AUTOMATED INADVERTENT INTRUDER APPLICATION

    International Nuclear Information System (INIS)

    Koffman, L; Patricia Lee, P; Jim Cook, J; Elmer Wilhite, E

    2007-01-01

    The Environmental Analysis and Performance Modeling group of Savannah River National Laboratory (SRNL) conducts performance assessments of the Savannah River Site (SRS) low-level waste facilities to meet the requirements of DOE Order 435.1. These performance assessments, which result in limits on the amounts of radiological substances that can be placed in the waste disposal facilities, consider numerous potential exposure pathways that could occur in the future. One set of exposure scenarios, known as inadvertent intruder analysis, considers the impact on hypothetical individuals who are assumed to inadvertently intrude onto the waste disposal site. Inadvertent intruder analysis considers three distinct scenarios for exposure referred to as the agriculture scenario, the resident scenario, and the post-drilling scenario. Each of these scenarios has specific exposure pathways that contribute to the overall dose for the scenario. For the inadvertent intruder analysis, the calculation of dose for the exposure pathways is a relatively straightforward algebraic calculation that utilizes dose conversion factors. Prior to 2004, these calculations were performed using an Excel spreadsheet. However, design checks of the spreadsheet calculations revealed that errors could be introduced inadvertently when copying spreadsheet formulas cell by cell and finding these errors was tedious and time consuming. This weakness led to the specification of functional requirements to create a software application that would automate the calculations for inadvertent intruder analysis using a controlled source of input parameters. This software application, named the Automated Inadvertent Intruder Application, has undergone rigorous testing of the internal calculations and meets software QA requirements. The Automated Inadvertent Intruder Application was intended to replace the previous spreadsheet analyses with an automated application that was verified to produce the same calculations and

  15. The fusion applications study - FAME

    International Nuclear Information System (INIS)

    Schultz, K.R.; Engholm, B.A.; Bourque, R.F.; Cheng, E.T.; Schaffer, M.J.; Wong, C.P.C.

    1986-01-01

    The Fusion Applications and Market Evaluation (''FAME'') study, being conducted by GA Technologies for Lawrence Livermore National Laboratory (LLNL) and US Department of Energy, Office of Fusion Energy, (US DOE) is described. This two-year program has a FY86 objective of Evaluating Alternative Applications of Fusion, and a FY87 goal of Exploring Innovative Applications. Applications are being reviewed and categorized into Baseline, Nuclear, Chemical, Electromagnetic, and Thermal application categories. The ''traditional'' applications of electricity generation, fissile fuel and tritium production, and hydrogen production continue to look attractive. Particularly promising new applications to date, with potential for near-term markets, are isotope production and radiation processing, especially when allied with the traditional application of electricity production. The economics of separate applications as well as coproduction are discussed. The combination of electricity and /sup 60/Co production appears to be one of the most attractive

  16. Laravel application development cookbook

    CERN Document Server

    Matula, Terry

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks.A short and precise guide to get you started with EaselJS , helping you to create some cool applications and games.EaselJS greatly simplifies application development in HTML5 Canvas using a syntax and an architecture very similar to the ActionScript 3.0 language. As a result, Flash / Flex developers will immediately feel at home but it's very easy to learn even if you've never opened Flash in your life. The book targets Web designers, animators,

  17. Mechanisms, Transmissions and Applications

    CERN Document Server

    Corves, Burkhard

    2012-01-01

    The first Workshop on Mechanisms, Transmissions and Applications -- MeTrApp-2011 was organized by the Mechatronics Department at the Mechanical Engineering Faculty, “Politehnica” University of Timisoara, Romania, under the patronage of the IFToMM Technical Committees Linkages and Mechanical Controls and Micromachines. The workshop brought together researchers and students who work in disciplines associated with mechanisms science and offered a great opportunity for scientists from all over the world to present their achievements, exchange innovative ideas and create solid international links, setting the trend for future developments in this important and creative field. The topics treated in this volume are mechanisms and machine design, mechanical transmissions, mechatronic and biomechanic applications, computational and experimental methods, history of mechanism and machine science and teaching methods.

  18. Quality Control Applications

    CERN Document Server

    Chorafas, Dimitris N

    2013-01-01

    Quality control is a constant priority in electrical, mechanical, aeronautical, and nuclear engineering – as well as in the vast domain of electronics, from home appliances to computers and telecommunications. Quality Control Applications provides guidance and valuable insight into quality control policies; their methods, their implementation, constant observation and associated technical audits. What has previously been a mostly mathematical topic is translated here for engineers concerned with the practical implementation of quality control. Once the fundamentals of quality control are established, Quality Control Applications goes on to develop this knowledge and explain how to apply it in the most effective way. Techniques are described and supported using relevant, real-life, case studies to provide detail and clarity for those without a mathematical background. Among the many practical examples, two case studies dramatize the importance of quality assurance: A shot-by-shot analysis of the errors made ...

  19. Ceramics for fusion applications

    International Nuclear Information System (INIS)

    Clinard, F.W. Jr.

    1987-01-01

    Ceramics are required for a variety of uses in both near-term fusion devices and in commercial powerplants. These materials must retain adequate structural and electrical properties under conditions of neutron, particle and ionizing irradiation; thermal and applied stresses; and physical and chemical sputtering. Ceramics such as Al 2 O 3 , MgAl 2 O 4 , BeO, Si 3 N 4 and SiC are currently under study for fusion applications, and results to date show widely-varying responses to the fusion environment. Materials can be identified today that will meet initial operating requirements, but improvements in physical properties are needed to achieve satisfactory lifetimes for critical applications. (author)

  20. Applications of QCD

    International Nuclear Information System (INIS)

    Ellis, J.

    1978-05-01

    A review is given of reliable quantum chromodynamics predictions which either have or soon can be verified by experiment. Included are a discussion of the classic application of quantum chromodynamics perturbation theory and asymptotic freedom to predict scaling violations in deep inelastic leptoproduction experiments, with emphasis on the first direct experimental confirmation of the numerical values of the anomalous dimensions; a review of recent advances in developing and justifying quantum chromodynamics perturbation theory predictions for a number of physical applications not underwritten by the operator product expansion and renormalization group arguments; and mention of attempts to consider the reliability of quantum chromodynamics perturbation theory predictions, given the fact that nonperturbative effects are presumably crucial in quantum chromodynamics. 100 references

  1. Optical Polarizationin Biomedical Applications

    CERN Document Server

    Tuchin, Valery V; Zimnyakov, Dmitry A

    2006-01-01

    Optical Polarization in Biomedical Applications introduces key developments in optical polarization methods for quantitative studies of tissues, while presenting the theory of polarization transfer in a random medium as a basis for the quantitative description of polarized light interaction with tissues. This theory uses the modified transfer equation for Stokes parameters and predicts the polarization structure of multiple scattered optical fields. The backscattering polarization matrices (Jones matrix and Mueller matrix) important for noninvasive medical diagnostic are introduced. The text also describes a number of diagnostic techniques such as CW polarization imaging and spectroscopy, polarization microscopy and cytometry. As a new tool for medical diagnosis, optical coherent polarization tomography is analyzed. The monograph also covers a range of biomedical applications, among them cataract and glaucoma diagnostics, glucose sensing, and the detection of bacteria.

  2. Information Engineering and Applications

    CERN Document Server

    Ma, Yan; International Conference on Information Engineering and Applications (IEA) 2011

    2012-01-01

    The International Conference on Information Engineering and Applications (IEA) 2011 will be held on October 21-24, 2011, in Chongqing, China. It is organized by Chongqing Normal University, Chongqing University, Shanghai Jiao Tong University, Nanyang Technological University, the University of Michigan, Chongqing University of Arts and Sciences, and sponsored by the National Natural Science Foundation of China. The objective of IEA 2011 is to facilitate an exchange of information on best practices for the latest research advances in the area of information engineering and intelligence applications, which mainly includes computer science and engineering, informatics, communications and control, electrical engineering, information computing, business intelligence and management. IEA 2011 will provide a forum for engineers and scientists in academia, industry, and government to address the most innovative research and development including technical challenges, social and economic issues, and to present and disc...

  3. Handbook of satellite applications

    CERN Document Server

    Madry, Scott; Camacho-Lara, Sergio

    2013-01-01

    Top space experts from around the world have collaborated to produce this comprehensive, authoritative, and clearly illustrated reference guide to the fast growing, multi-billion dollar field of satellite applications and space communications. This handbook, done under the auspices of the International Space University based in France, addresses not only system technologies but also examines market dynamics, technical standards and regulatory constraints. The handbook is a completely multi-disciplinary reference book that covers, in an in-depth fashion, the fields of satellite telecommunications, Earth observation, remote sensing, satellite navigation, geographical information systems, and geosynchronous meteorological systems. It covers current practices and designs as well as advanced concepts and future systems. It provides a comparative analysis of the common technologies and design elements for satellite application bus structures, thermal controls, power systems, stabilization techniques, telemetry, com...

  4. Nuclear applications for health

    International Nuclear Information System (INIS)

    Cuaron, A.

    1995-01-01

    Just before the turn of the 20th century, the discoveries of X-rays, in 1895, and of radioactivity, in 1896, opened up whole new worlds of science. For the medical community, the world has been changing ever since, in some countries far more rapidly than in others. Over the past 100 years, the X-ray has become as familiar to most people as the dentist's chair. As we move into the next century, greater attention is being placed upon less known but more far-reaching radiation technologies and nuclear applications that today's physicians are able to use for earlier diagnosis and treatment of serious illness. This article, in question-and-answer format, explains the differences between the various types of nuclear applications for human health and looks at the evolution of the IAEA's related activities. (author)

  5. Application of ecological mapping

    International Nuclear Information System (INIS)

    Sherk, J.A.

    1982-01-01

    The US Fish and Wildlife Service has initiated the production of a comprehensive ecological inventory map series for use as a major new planning tool. Important species data along with special land use designations are displayed on 1:250,000 scale topographic base maps. Sets of maps have been published for the Atlantic and Pacific coastal areas of the United States. Preparation of a map set for the Gulf of Mexico is underway at the present time. Potential application of ecological inventory map series information to a typical land disposal facility could occur during the narrowing of the number of possible disposal sites, the design of potential disposal site studies of ecological resources, the preparation of the environmental report, and the regulatory review of license applications. 3 figures, 3 tables

  6. Technology applications bulletins

    International Nuclear Information System (INIS)

    Koncinski, W. Jr.

    1989-02-01

    Martin Marietta Energy Systems, Inc. (Energy Systems), operates five facilities for the US Department of Energy (DOE): the Oak Ridge National Laboratory (ORNL), which is a large, multidisciplinary research and development (R and D) center whose primary mission is energy research; the Oak Ridge Y-12 Plant, which engages in defense research, development, and production; and the uranium-enrichment plants at Oak Ridge; Paducah, Kentucky; and Portsmouth, Ohio. Much of the research carried out at these facilities is of interest to industry and to state or local governments. To make information about this research available, the Energy Systems Office of Technology Applications publishes brief descriptions of selected technologies and reports. These technology applications bulletins describe the new technology and inform the reader about how to obtain further information, gain access to technical resources, and initiate direct contact with Energy Systems researchers

  7. Ceramics for fusion applications

    International Nuclear Information System (INIS)

    Clinard, F.W. Jr.

    1986-01-01

    Ceramics are required for a variety of uses in both near-term fusion devices and in commercial powerplants. These materials must retain adequate structural and electrical properties under conditions of neutron, particle, and ionizing irradiation; thermal and applied stresses; and physical and chemical sputtering. Ceramics such as Al 2 O 3 , MgAl 2 O 4 , BeO, Si 3 N 4 and SiC are currently under study for fusion applications, and results to date show widely-varying response to the fusion environment. Materials can be identified today which will meet initial operating requirements, but improvements in physical properties are needed to achieve satisfactory lifetimes for critical applications

  8. Prospects for HTS applications

    International Nuclear Information System (INIS)

    Gamble, B.B.; Snitchler, G.L.; Schwall, R.E.

    1996-01-01

    High temperature superconductor (HTS) wire is rapidly maturing into a working material being produced in ever larger quantities and being used in more significant demonstrations and prototypes. Conductor is now produced routinely in several hundred meter lengths with reproducible results. Current density has progressed to a level suitable for demonstration of many applications. Wire strength has improved and large prototypes fabricated or under consideration using HTS include Superconducting Magnetic Energy Storage (SMES), rotating electrical machines including synchronous ac and dc homopolar motors and drives, generators and condensers, underground transmission cables, utility distribution equipment such as transformers and current limiters, commercial processing applications such as magnetic separation, and specialty magnets such as high field inserts. In this paper the requirements, progress toward these requirements, and the prospects for the future are reviewed

  9. Multifractals theory and applications

    CERN Document Server

    Harte, David

    2001-01-01

    Although multifractals are rooted in probability, much of the related literature comes from the physics and mathematics arena. Multifractals: Theory and Applications pulls together ideas from both these areas using a language that makes them accessible and useful to statistical scientists. It provides a framework, in particular, for the evaluation of statistical properties of estimates of the Renyi fractal dimensions.The first section provides introductory material and different definitions of a multifractal measure. The author then examines some of the various constructions for describing multifractal measures. Building from the theory of large deviations, he focuses on constructions based on lattice coverings, covering by point-centered spheres, and cascades processes. The final section presents estimators of Renyi dimensions of integer order two and greater and discusses their properties. It also explores various applications of dimension estimation and provides a detailed case study of spatial point patte...

  10. Applications of optical imaging

    International Nuclear Information System (INIS)

    Schellenberger, E.

    2005-01-01

    Optical imaging in the form of near infrared fluorescence and bioluminescence has proven useful for a wide range of applications in the field of molecular imaging. Both techniques provide a high sensitivity (in the nanomolar range), which is of particular importance for molecular imaging. Imaging with near infrared fluorescence is especially cost-effective and can be performed, in contrast to radioactivity-based methods, with fluorescence dyes that remain stable for months. The most important advantage of bioluminescence, in turn, is the lack of background signal. Although molecular imaging with these techniques is still in the experimental phase, an application of near infrared fluorescence is already foreseeable for the imaging of superficial structures. (orig.)

  11. Diverse applications of radioimmunoassay

    International Nuclear Information System (INIS)

    Yalow, R.S.

    1981-01-01

    The author discussed the issues concerning insulins of the different species (pig, dog and sperm whale) and the applications of species specific antisera in experimental and clinical settings. The possible role of a new form of ACTH as a hormonal marker was also discussed. Three species of insulin (pig, dog, and sperm whale) were separated by human antisera. Immune reaction was utilized to distinguish between endogenous human insulin and exogenously administered animal insulin. The longer acting insulins was found to be more immunogenic than regular crystalline insulins. Insulin concentrations in acid/ethanol extracts of the whole rat brain was about 25 times higher than plasma insulin. Plasma concentration of ACTH could be applicable to effect the distinction between tumor primary in or metastatic to the lung. (Nakanishi, T.)

  12. Calculus with applications

    CERN Document Server

    Lax, Peter D

    2014-01-01

    This new edition of Lax, Burstein, and Lax's Calculus with Applications and Computing offers meaningful explanations of the important theorems of single variable calculus. Written with students in mathematics, the physical sciences, and engineering in mind, and revised with their help, it shows that the themes of calculation, approximation, and modeling are central to mathematics and the main ideas of single variable calculus. This edition brings the innovation of the first edition to a new generation of students. New sections in this book use simple, elementary examples to show that when applying calculus concepts to approximations of  functions, uniform convergence is more natural and easier to use than point-wise convergence. As in the original, this edition includes material that is essential for students in science and engineering, including an elementary introduction to complex numbers and complex-valued functions, applications of calculus to modeling vibrations and population dynamics, and an introduc...

  13. Applications of mesoscopic physics

    International Nuclear Information System (INIS)

    Feng, Shechao.

    1993-01-01

    Research activities in the area ''applications of mesoscopic physics to novel correlations and fluctuations of speckle patterns: imaging and tomography with multiply scattered classical waves'' are briefly summarized. The main thrust in fundamental research is in the general areas of mesoscopic effects in disordered semiconductors and metals and the related field of applications of mesoscopic physics to the subject matter of classical wave propagation through disordered scattering media. Specific topics are Fabry-Perot interferometer with disorder: correlations and light localization; electron-phonon inelastic scattering rate and the temperature scaling exponent in integer quantum Hall effect; and transmission and reflection correlations of second harmonic waves in nonlinear random media. Research in applied physics centered on far infrared photon-assisted transport through quantum point contact devices and photon migration distributions in multiple scattering media. 7 refs

  14. Biophotonics concepts to applications

    CERN Document Server

    Keiser, Gerd

    2016-01-01

    This book is designed to introduce senior-level and postgraduate students to the principles and applications of biophotonics. It also will serve well as a working reference to practicing physicians, clinicians, biomedical researchers, and biomedical engineers dealing with photonics-based tools and instruments. The book topics include the fundamentals of optics and photonics, the optical properties of biological tissues, various types of light-tissue interactions, microscopy for visualizing tissue components, spectroscopy for optically analyzing the properties of healthy and diseased tissue, and optical biomedical imaging. The tools and techniques described in the book include laser and LED optical sources, photodetectors, optical fibers, bioluminescent probes for labeling cells, optical-based biosensors, nanophotonics, surface plasmon resonance, and lab-on-a-chip technologies. Among the applications are optical coherence tomography (OCT), flow cytometery, photodynamic therapy (PDT), low-level light therapy (L...

  15. Justification: theory and application

    International Nuclear Information System (INIS)

    Rowe, W.D.

    1979-01-01

    The concept of justification implies that a specific decision as to the relative merits of benefits and costs and detriment be made whenever: (1) a new practice is introduced that involves an indirect or direct increase in radiation exposure; or (2) an existing practice affecting radiation exposure is modified; or (3) an increase in radiation protection of an existing practice is to be considered. Such decisions are imprecise and involve intangible values. ICRP has, however, developed a mathematical model to express the structure of such decisions. The utility of this model for making the key paramters of justification decisions visible is explored in this paper in two ways. First, the structure of the model and its implications are explored in the abstract. Secondly, several specific applications are studied to determine if the model has utility in structuring application decisions, and the extent to which conclusions can be evolved in a meaningful, visible manner. (author)

  16. Numerical semigroups and applications

    CERN Document Server

    Assi, Abdallah

    2016-01-01

    This work presents applications of numerical semigroups in Algebraic Geometry, Number Theory, and Coding Theory. Background on numerical semigroups is presented in the first two chapters, which introduce basic notation and fundamental concepts and irreducible numerical semigroups. The focus is in particular on free semigroups, which are irreducible; semigroups associated with planar curves are of this kind. The authors also introduce semigroups associated with irreducible meromorphic series, and show how these are used in order to present the properties of planar curves. Invariants of non-unique factorizations for numerical semigroups are also studied. These invariants are computationally accessible in this setting, and thus this monograph can be used as an introduction to Factorization Theory. Since factorizations and divisibility are strongly connected, the authors show some applications to AG Codes in the final section. The book will be of value for undergraduate students (especially those at a higher leve...

  17. Metagraphs and their applications

    CERN Document Server

    Basu, Amit

    2007-01-01

    The graph is a critical and useful concept in designing many information processing systems. Systems such as transaction processing systems, decision support systems, and workflow systems are all helped immensely by a graphical structure. Simple graphs and digraphs allow for the construction of a variety of system design tools that provide a convenient and appealing format for illustrating information infrastructures, while allowing any subsequent analyses to be performed by the user. However, the metagraph, a new graphical structure that is developed in this book, goes beyond the representational and provides Information Systems with a robust, analytical modeling graphic tool. METAGRAPHS AND THEIR APPLICATIONS is a presentation of metagraph theory and its applications that begins by defining a metagraph and its uses. They are more complex than a simple graph structure, but they allow for representation and analysis of more complex systems. The material contained in this book is presented in two parts. The fi...

  18. Finite fields and applications

    CERN Document Server

    Mullen, Gary L

    2007-01-01

    This book provides a brief and accessible introduction to the theory of finite fields and to some of their many fascinating and practical applications. The first chapter is devoted to the theory of finite fields. After covering their construction and elementary properties, the authors discuss the trace and norm functions, bases for finite fields, and properties of polynomials over finite fields. Each of the remaining chapters details applications. Chapter 2 deals with combinatorial topics such as the construction of sets of orthogonal latin squares, affine and projective planes, block designs, and Hadamard matrices. Chapters 3 and 4 provide a number of constructions and basic properties of error-correcting codes and cryptographic systems using finite fields. Each chapter includes a set of exercises of varying levels of difficulty which help to further explain and motivate the material. Appendix A provides a brief review of the basic number theory and abstract algebra used in the text, as well as exercises rel...

  19. Biomedical applications of nanotechnology.

    Science.gov (United States)

    Ramos, Ana P; Cruz, Marcos A E; Tovani, Camila B; Ciancaglini, Pietro

    2017-04-01

    The ability to investigate substances at the molecular level has boosted the search for materials with outstanding properties for use in medicine. The application of these novel materials has generated the new research field of nanobiotechnology, which plays a central role in disease diagnosis, drug design and delivery, and implants. In this review, we provide an overview of the use of metallic and metal oxide nanoparticles, carbon-nanotubes, liposomes, and nanopatterned flat surfaces for specific biomedical applications. The chemical and physical properties of the surface of these materials allow their use in diagnosis, biosensing and bioimaging devices, drug delivery systems, and bone substitute implants. The toxicology of these particles is also discussed in the light of a new field referred to as nanotoxicology that studies the surface effects emerging from nanostructured materials.

  20. Nattokinase: production and application.

    Science.gov (United States)

    Dabbagh, Fatemeh; Negahdaripour, Manica; Berenjian, Aydin; Behfar, Abdolazim; Mohammadi, Fatemeh; Zamani, Mozhdeh; Irajie, Cambyz; Ghasemi, Younes

    2014-11-01

    Nattokinase (NK, also known as subtilisin NAT) (EC 3.4.21.62) is one of the most considerable extracellular enzymes produced by Bacillus subtilis natto. The main interest about this enzyme is due to its direct fibrinolytic activity. Being stable enough in the gastrointestinal tract makes this enzyme a useful agent for the oral thrombolytic therapy. Thus, NK is regarded as a valuable dietary supplement or nutraceutical. Proven safety and ease of mass production are other advantages of this enzyme. In addition to these valuable advantages, there are other applications attributed to NK including treatment of hypertension, Alzheimer's disease, and vitreoretinal disorders. This review tends to bring a brief description about this valuable enzyme and summarizes the various biotechnological approaches used in its production, recovery, and purification. Some of the most important applications of NK, as well as its future prospects, are also discussed.

  1. Thin film device applications

    CERN Document Server

    Kaur, Inderjeet

    1983-01-01

    Two-dimensional materials created ab initio by the process of condensation of atoms, molecules, or ions, called thin films, have unique properties significantly different from the corresponding bulk materials as a result of their physical dimensions, geometry, nonequilibrium microstructure, and metallurgy. Further, these characteristic features of thin films can be drasti­ cally modified and tailored to obtain the desired and required physical characteristics. These features form the basis of development of a host of extraordinary active and passive thin film device applications in the last two decades. On the one extreme, these applications are in the submicron dimensions in such areas as very large scale integration (VLSI), Josephson junction quantum interference devices, magnetic bubbles, and integrated optics. On the other extreme, large-area thin films are being used as selective coatings for solar thermal conversion, solar cells for photovoltaic conver­ sion, and protection and passivating layers. Ind...

  2. Nonlocal diffusion and applications

    CERN Document Server

    Bucur, Claudia

    2016-01-01

    Working in the fractional Laplace framework, this book provides models and theorems related to nonlocal diffusion phenomena. In addition to a simple probabilistic interpretation, some applications to water waves, crystal dislocations, nonlocal phase transitions, nonlocal minimal surfaces and Schrödinger equations are given. Furthermore, an example of an s-harmonic function, its harmonic extension and some insight into a fractional version of a classical conjecture due to De Giorgi are presented. Although the aim is primarily to gather some introductory material concerning applications of the fractional Laplacian, some of the proofs and results are new. The work is entirely self-contained, and readers who wish to pursue related subjects of interest are invited to consult the rich bibliography for guidance.

  3. Applications of isotopes

    International Nuclear Information System (INIS)

    Kirby-Smith, J.S.

    1976-01-01

    Current and potential applications of stable isotopes as tracers in a number of biomedical and environmental areas are discussed. It is pointed out that a wide variety of problems exist in these fields whose solutions in principle are amenable to the isotopic approach. The number and diversity of these problems as well as the unique role stable isotopes can play in their solution illustrate the importance of achieving and maintaining a broad inventory of isotopic species. Experience has demonstrated unequivocally an additional overriding requirement for widespread exploration of stable isotopes by the scientific and technical community, i.e., the need for low cost availability of the materials in quantity. Some representative applications of 12 C, 13 C, 14 N, 15 N, 16 O, 17 O, and 18 O are discussed

  4. Magnetism basics and applications

    CERN Document Server

    Stefanita, Carmen-Gabriela

    2012-01-01

    This textbook is aimed at engineering students who are likely to come across magnetics applications in their professional practice. Whether designing lithography equipment containing ferromagnetic brushes, or detecting defects in aeronautics, some basic knowledge of 21st century magnetism is needed. From the magnetic tape on the pocket credit card to the read head in a personal computer, people run into magnetism in many products. Furthermore, in a variety of disciplines tools of the trade exploit magnetic principles, and many interdisciplinary laboratory research areas cross paths with magnetic phenomena that may seem mysterious to the untrained mind. Therefore, this course offers a broad coverage of magnetism topics encountered more often in this millenium, revealing key concepts on which many practical applications rest. Some traditional subjects in magnetism are discussed in the first half of the book, followed by areas likely to spark the curiosity of those more interested in today’s technological achi...

  5. Industrial applications at GANIL

    International Nuclear Information System (INIS)

    Delagrange, H.

    1993-01-01

    After a first round of industrial applications using heavy ion beams, GANIL has refocused these activities along the lines defined by a strategy and market study. Heavy ion industrial applications take their roots in the physical effects of the interactions occurring between heavy ion projectiles and matter. Specific equipments operated by GANIL or CIRIL allow users to take benefit from these effects. By heavy ion irradiation, industrial companies qualify radiation hardened electronic components and sensitize plastic films to produce 'nuclear track' membranes. Research and development programs with laboratories of the public sector, focus on heavy ion lithography dedicated to large area luminescent flat screens with field emitter microtips and on tribology with radioactive implanted ions. Even sometimes facing difficulties to fill the gap between industry and research, GANIL is eager to promote heavy ion beam technologies. (author) 36 refs., 6 figs., 5 tabs

  6. Applications of supramolecular chemistry

    CERN Document Server

    Schneider, Hans-Jörg

    2012-01-01

    ""The time is ripe for the present volume, which gathers thorough presentations of the numerous actually realized or potentially accessible applications of supramolecular chemistry by a number of the leading figures in the field. The variety of topics covered is witness to the diversity of the approaches and the areas of implementation…a broad and timely panorama of the field assembling an eminent roster of contributors.""-Jean-Marie Lehn, 1987 Noble Prize Winner in Chemistry

  7. Advanced Welding Applications

    Science.gov (United States)

    Ding, Robert J.

    2010-01-01

    Some of the applications of advanced welding techniques are shown in this poster presentation. Included are brief explanations of the use on the Ares I and Ares V launch vehicle and on the Space Shuttle Launch vehicle. Also included are microstructural views from four advanced welding techniques: Variable Polarity Plasma Arc (VPPA) weld (fusion), self-reacting friction stir welding (SR-FSW), conventional FSW, and Tube Socket Weld (TSW) on aluminum.

  8. Personal network (PN) applications

    DEFF Research Database (Denmark)

    Prasad, R.; Skouby, Knud Erik

    2005-01-01

    The applications of PN will be realised under many scenarios where users can have access to their personal network all the time. This network will enable the user to share critical information, play games, control their home remotely, etc. All this will be achieved with seamless interworking...... and handover between networks and user devices. This paper presents an array of use case scenarios that validates the ubiquitous usage of PN....

  9. Iontophoresis: principles and applications

    Directory of Open Access Journals (Sweden)

    Eddy Krueger

    Full Text Available Introduction Iontophoresis is a noninvasive technique used to increase transdermal penetration of substances through the skin layer (epidermis, dermis and hypodermis in a controlled manner. Technological advance in recent decades have provided reduced cost of equipment needed for implementation, which allowed for the expansion of this technique. Objective The aim of this paper is to present the state of the art on iontophoresis, ranging from the atomic characteristics of the ion formation to the current applications of the technique. Methods Were researched papers from databases: IOP publishing, ScienceDirect, Pubmed, Springer, IEEE Xplore, Google Scholar and books with keywords iontophoresis, ions, topical applications between 1967 and 2010. Results Were selected (number of papers and database 1 IOP Publishing, 1 from ScienceDirect, Central, 1 from Springer, 2 from PubMed, 11 from IEEE Xplore, 35 from Google Scholar, and 15 books, totaling 66 references and websites with nationally marketed electrotherapy products. Conclusion Iontophoresis is suitable for applications such as acetic acid (calcific tendinitis and myositis ossificans, calcium chloride and magnesium sulfate (control of musculoskeletal spasms, dexamethasone (inflammation, lidocaine (inflammation of soft tissues, zinc oxide (rheumatoid arthritis. It is also used in cosmetic applications with devices attached to the skin and for eye treatment aimed at specific tissues of the eye, providing a treatment option for various eye diseases, reducing the complications secondary to traditional methods of treatment. The advantages are the significant increase in the release and control of therapeutic agents, including drugs with high molecular weight. The disadvantages of iontophoresis are the complexity of the drug release system and prolonged exposure of the skin to an electrical current.

  10. Flywheels: Mobile applications

    Science.gov (United States)

    Rabenhorst, D. W.

    1981-06-01

    The characteristics of modern flywheel energy storage systems uniquely qualify the flywheel for use in a variety of road vehicles, off road vehicles and rail vehicles. About sixty studies and vehicle demonstration programs in a dozen countries indicate that future such flywheel powered vehicles will have improved performance, reduced energy and fuel consumption and reduced life cycle cost. Flywheel capabilities and mobile applications were reviewed.

  11. Biotechnological applications of microalgae

    OpenAIRE

    Wan-Loy Chu

    2012-01-01

    Microalgae are important biologicalresources that have a wide range of biotechnologicalapplications. Due to their high nutritional value,microalgae such as Spirulina and Chlorella are beingmass cultured for health food. A variety of high-valueproducts including polyunsaturated fatty acids (PUFA),pigments such as carotenoids and phycobiliproteins, andbioactive compounds are useful as nutraceuticals andpharmaceuticals, as well as for industrial applications. Interms of environmental biotechnolo...

  12. Hardware characteristic and application

    International Nuclear Information System (INIS)

    Gu, Dong Hyeon

    1990-03-01

    The contents of this book are system board on memory, performance, system timer system click and specification, coprocessor such as programing interface and hardware interface, power supply on input and output, protection for DC output, Power Good signal, explanation on 84 keyboard and 101/102 keyboard,BIOS system, 80286 instruction set and 80287 coprocessor, characters, keystrokes and colors, communication and compatibility of IBM personal computer on application direction, multitasking and code for distinction of system.

  13. Application of Auto CAD

    International Nuclear Information System (INIS)

    Park, Yong Un; Kim, Geun Ho

    1989-05-01

    This book has introduction to use this book and explanation of application on Auto CAD, which includes, sub directories, batch files, robot wrist, design of standard paper, title block, robort weld room, robert wrist joint, PC board, plant sym, electro, PID, machines, robots, bubbles, plant, schema, Pid, plant assembly, robots, dim plant, PL-ASSM, plotting line weight control, symbol drawing joint, Auto CAD using script file, set up of workout · MNU, workout MNU, ACAD, LSP and workout · MNU.

  14. Mobile application for surveys

    OpenAIRE

    Pifko, Luka

    2012-01-01

    The main objective of the diploma thesis is to produce a system that supports field interviewers. The introduction defines the problem and reasons for making such a system. All the technologies which we have used to achieve the objective are described within. We have made a web application designed for questionnaire designers. The designing of the questionnaires is dynamic and client-side up until the user decides to send the data to the database. In addition to designing questionnaires, ...

  15. Corrosimetry: examples of applications

    International Nuclear Information System (INIS)

    Feron, D.; Ritti, D.; Plante, G.

    1991-01-01

    Corrosion rate of materials in industrial plants are often measured by weighing and examination of specimens. For real time determination of corrosion rate of metallic structures, two kinds of techniques are examined in this paper: continuous measurement of resistivity increase produced by corrosion of a specimen and electrochemical polarization of a corrosion electrode. Applications are briefly presented for corrosion of stainless steel by nitric acid in reprocessing plants, corrosion of ordinary steel by geothermal fluids and corrosion in marine environment

  16. Graph theory with applications

    CERN Document Server

    Vasudev, C

    2006-01-01

    Salient Features Over 1500 problems are used to illustrate concepts, related to different topics, and introduce applications. Over 1000 exercises in the text with many different types of questions posed. Precise mathematical language is used without excessive formalism and abstraction. Care has been taken to balance the mix of notation and words in mathematical statements. Problem sets are stated clearly and unambiguously, and all are carefully graded for various levels of difficulty. This text has been carefully designed for flexible use.

  17. Android application security essentials

    CERN Document Server

    Rai, Pragati

    2013-01-01

    Android Application Security Essentials is packed with examples, screenshots, illustrations, and real world use cases to secure your apps the right way.If you are looking for guidance and detailed instructions on how to secure app data, then this book is for you. Developers, architects, managers, and technologists who wish to enhance their knowledge of Android security will find this book interesting. Some prior knowledge of development on the Android stack is desirable but not required.

  18. Application Specific Optical Fibers

    OpenAIRE

    Pal, Bishnu P.

    2010-01-01

    In this chapter we have attempted to provide a unified summary description of the most important propagation characteristics of an optical fiber followed by discussion on several variety of special fibers for realizing fiber amplifiers, dispersion compensating fibers, microstructured optical fibers, and so on. Even though huge progress has been made on development of optical fibers for telecom application, a need for developing special fibers, not necessarily for telecom alone, has arisen. Th...

  19. Nanotechnology and cancer applications

    OpenAIRE

    Gökdeniz, Mehmet; Akbaba, Muhsin; Nazlıcan, Ersin

    2018-01-01

    Applicationsof nanotechnology in various disciplines of medicine particularly cancer careare becoming increasingly popular so much so that the process of replacingtraditional health‑care by nanomedicine had already begun. Nanomedicine focuseson the formulations of imaging, diagnostic and therapeutic agents, which can becarried by biocompatible nanoparticles, for the purpose of cancer/ diseasemanagement.Common nanomaterials and devices applicable in cancer medicine are liposomes,polymeric‑mice...

  20. Optimization algorithms and applications

    CERN Document Server

    Arora, Rajesh Kumar

    2015-01-01

    Choose the Correct Solution Method for Your Optimization ProblemOptimization: Algorithms and Applications presents a variety of solution techniques for optimization problems, emphasizing concepts rather than rigorous mathematical details and proofs. The book covers both gradient and stochastic methods as solution techniques for unconstrained and constrained optimization problems. It discusses the conjugate gradient method, Broyden-Fletcher-Goldfarb-Shanno algorithm, Powell method, penalty function, augmented Lagrange multiplier method, sequential quadratic programming, method of feasible direc

  1. Biomaterials and their applications

    CERN Document Server

    Reza Rezaie, Hamid; Öchsner, Andreas

    2015-01-01

    This short book presents an overview of different types of biomaterial such as bio ceramics, bio polymers, metals and bio composites, while especially focusing on nano biomaterials and their applications in different tissues. It provides a compact introduction to nano materials for drug delivery systems, tissue engineering and implants, while also reviewing essential trends in the biomaterial field over the last few decades and the latest developments.

  2. Microdosimetry and its applications

    International Nuclear Information System (INIS)

    Sedlak, A.

    1989-01-01

    Basic microdosimetry principles and their theoretical and experimental aspects are explained and discussed. Part A gives a description of stochastic processes and presents the principles of microdosimetry, defines basic quantities and methods, such as linear energy transfer, the straggling theory, the theory of particle path structure, etc. Part B deals with practical applications of microdosimetry in radiobiology, radiotherapy, radiation protection, radiation chemistry, thermoluminescence and microelectronics. (J.J.). 57 figs

  3. Homomorphic encryption and applications

    CERN Document Server

    Yi, Xun; Bertino, Elisa

    2014-01-01

    This book introduces the fundamental concepts of homomorphic encryption. From these foundations, applications are developed in the fields of private information retrieval, private searching on streaming data, privacy-preserving data mining, electronic voting and cloud computing. The content is presented in an instructional and practical style, with concrete examples to enhance the reader's understanding. This volume achieves a balance between the theoretical and the practical components of modern information security. Readers will learn key principles of homomorphic encryption as well as their

  4. Applications of particle accelerators

    International Nuclear Information System (INIS)

    Barbalat, O.

    1994-01-01

    Particle accelerators are now widely used in a variety of applications for scientific research, applied physics, medicine, industrial processing, while possible utilisation in power engineering is envisaged. Earlier presentations of this subject, given at previous CERN Accelerator School sessions have been updated with papers contributed to the first European Conference on Accelerators in Applied Research and Technology (ECAART) held in September 1989 in Frankfurt and to the Second European Particle Accelerator Conference in Nice in June 1990. (orig.)

  5. Commercial applications for COIL

    Science.gov (United States)

    Solomon, Wayne C.; Carroll, David L.; King, D. M.; Fockler, L. A.; Stromberg, D. S.; Sexauer, M.; Milmoe, A.; Sentman, Lee H.

    2000-01-01

    The chemical oxygen-iodine laser (COIL) is a high power, fiber deliverable tool, which can be used for a number of different industrial applications. COIL is of particular interest because of its short fiber deliverable wavelength, high scaleable continuous wave power, and excellent material interaction properties. In past research the University of Illinois at Urbana-Champaign identified and decommissioning and decontamination (DD) of nuclear facilities as a primary focus for COIL technology. DD will be a major challenge in the coming decades. The use of a robotically driven fiber delivered cutting/ablation tool in contaminated areas promises to lower risks to workers for the DD mission. Further, the high cutting speed of COIL will significantly reduce the time required to cut contaminated equipment, reducing costs. The high power of COIL will permit the dismantling of thick stacks of piping and equipment as well as reactor vessels. COIL is very promising for the removal of material from contaminated surfaces, perhaps to depths thicker than an inch. Laser cutting and ablation minimizes dust and fumes, which reduces the required number of high efficiency particulate accumulator filters, thus reducing costly waste disposal. Other potential industrial applications for COIL are shipbuilding, automotive manufacturing, heavy machinery manufacturing, tasks requiring underwater cutting or welding, and there appear to be very promising applications for high powers lasers in the oil industry.

  6. Load Balancing Scientific Applications

    Energy Technology Data Exchange (ETDEWEB)

    Pearce, Olga Tkachyshyn [Texas A & M Univ., College Station, TX (United States)

    2014-12-01

    The largest supercomputers have millions of independent processors, and concurrency levels are rapidly increasing. For ideal efficiency, developers of the simulations that run on these machines must ensure that computational work is evenly balanced among processors. Assigning work evenly is challenging because many large modern parallel codes simulate behavior of physical systems that evolve over time, and their workloads change over time. Furthermore, the cost of imbalanced load increases with scale because most large-scale scientific simulations today use a Single Program Multiple Data (SPMD) parallel programming model, and an increasing number of processors will wait for the slowest one at the synchronization points. To address load imbalance, many large-scale parallel applications use dynamic load balance algorithms to redistribute work evenly. The research objective of this dissertation is to develop methods to decide when and how to load balance the application, and to balance it effectively and affordably. We measure and evaluate the computational load of the application, and develop strategies to decide when and how to correct the imbalance. Depending on the simulation, a fast, local load balance algorithm may be suitable, or a more sophisticated and expensive algorithm may be required. We developed a model for comparison of load balance algorithms for a specific state of the simulation that enables the selection of a balancing algorithm that will minimize overall runtime.

  7. Radioisotopes for medical applications

    International Nuclear Information System (INIS)

    Carr, S.

    1998-01-01

    For more than 3 decades, the Australian Nuclear Science and Technology Organisation has been the country's main supplier of radioisotopes for medical applications. The use of radioisotopes in medicine has revolutionised the diagnosis, management and treatment of many serious diseases such as cancer, heart disease and stroke. It is also beginning to play a key role in neurological disorders such as Parkinson and Alzheimers disease and epilepsy. More recently there has been considerable growth in the application of nuclear medicine to treat sport-related injuries - especially wrist, ankle and knees where more common techniques do not always enable accurate diagnosis. Australia is a recognised leader in nuclear medicine. This can be partially attributed to the close relationship between ANSTO and the medical community in providing opportunities to develop and evaluate new agents to support more effective patient care. A list of commercial isotopes produced in the reactor or the cyclotron and used in medical applications is given. Nuclear medicine plays an important role in the clinical environment and the timely supply of radioisotopes is a key element. ANSTO will continue to be the premier supplier of currently available and developing isotopes to support the health and well being of the Australian community

  8. Bayesian theory and applications

    CERN Document Server

    Dellaportas, Petros; Polson, Nicholas G; Stephens, David A

    2013-01-01

    The development of hierarchical models and Markov chain Monte Carlo (MCMC) techniques forms one of the most profound advances in Bayesian analysis since the 1970s and provides the basis for advances in virtually all areas of applied and theoretical Bayesian statistics. This volume guides the reader along a statistical journey that begins with the basic structure of Bayesian theory, and then provides details on most of the past and present advances in this field. The book has a unique format. There is an explanatory chapter devoted to each conceptual advance followed by journal-style chapters that provide applications or further advances on the concept. Thus, the volume is both a textbook and a compendium of papers covering a vast range of topics. It is appropriate for a well-informed novice interested in understanding the basic approach, methods and recent applications. Because of its advanced chapters and recent work, it is also appropriate for a more mature reader interested in recent applications and devel...

  9. Applications of nuclear physics

    Science.gov (United States)

    Hayes, A. C.

    2017-02-01

    Today the applications of nuclear physics span a very broad range of topics and fields. This review discusses a number of aspects of these applications, including selected topics and concepts in nuclear reactor physics, nuclear fusion, nuclear non-proliferation, nuclear-geophysics, and nuclear medicine. The review begins with a historic summary of the early years in applied nuclear physics, with an emphasis on the huge developments that took place around the time of World War II, and that underlie the physics involved in designs of nuclear explosions, controlled nuclear energy, and nuclear fusion. The review then moves to focus on modern applications of these concepts, including the basic concepts and diagnostics developed for the forensics of nuclear explosions, the nuclear diagnostics at the National Ignition Facility, nuclear reactor safeguards, and the detection of nuclear material production and trafficking. The review also summarizes recent developments in nuclear geophysics and nuclear medicine. The nuclear geophysics areas discussed include geo-chronology, nuclear logging for industry, the Oklo reactor, and geo-neutrinos. The section on nuclear medicine summarizes the critical advances in nuclear imaging, including PET and SPECT imaging, targeted radionuclide therapy, and the nuclear physics of medical isotope production. Each subfield discussed requires a review article unto itself, which is not the intention of the current review; rather, the current review is intended for readers who wish to get a broad understanding of applied nuclear physics.

  10. Therapeutic applications of radiopharmaceuticals

    International Nuclear Information System (INIS)

    Baker, W.J.; Datz, F.L.; Beightol, R.W.

    1987-01-01

    Whether a radiopharmaceutical has diagnostic or therapeutic application depends on both the isotope and pharmaceutical used. For diagnostic applications, the isotope should undergo only γ-decay, since usually only γ-radiation is detected by nuclear medicine cameras. The half-life should be just long enough to allow the procedure to be performed. In contrast, the isotope needed for therapeutic purposes should have particulate radiation, such as a β-particle (electron), since these are locally absorbed an increase the local radiation dose. γ-Radiation, which penetrates the tissues, produces less radiation dose than do Β-particles. Several references dealing with radioactive decay, particulate interactions, and diagnostic and therapeutic applications of radiopharmaceuticals are available. Radiopharmaceuticals can legally be used only by physicians who are qualified by specific training in the safe handling of radionuclides. The experience and training of these physicians must be approved by the Nuclear Regulatory Commission or Agreement State Agency authorized to license the use of radiopharmaceuticals. A list of all byproduct material and procedures is available in the Code of Federal Regulations. Of the many radiopharmaceuticals available for diagnostic and therapeutic use, only those commonly used are discussed in this chapter

  11. Applications of nuclear physics

    International Nuclear Information System (INIS)

    Hayes-Sterbenz, Anna Catherine

    2017-01-01

    Today the applications of nuclear physics span a very broad range of topics and fields. This review discusses a number of aspects of these applications, including selected topics and concepts in nuclear reactor physics, nuclear fusion, nuclear non-proliferation, nuclear-geophysics, and nuclear medicine. The review begins with a historic summary of the early years in applied nuclear physics, with an emphasis on the huge developments that took place around the time of World War II, and that underlie the physics involved in designs of nuclear explosions, controlled nuclear energy, and nuclear fusion. The review then moves to focus on modern applications of these concepts, including the basic concepts and diagnostics developed for the forensics of nuclear explosions, the nuclear diagnostics at the National Ignition Facility, nuclear reactor safeguards, and the detection of nuclear material production and trafficking. The review also summarizes recent developments in nuclear geophysics and nuclear medicine. The nuclear geophysics areas discussed include geo-chronology, nuclear logging for industry, the Oklo reactor, and geo-neutrinos. The section on nuclear medicine summarizes the critical advances in nuclear imaging, including PET and SPECT imaging, targeted radionuclide therapy, and the nuclear physics of medical isotope production. Lastly, each subfield discussed requires a review article unto itself, which is not the intention of the current review; rather, the current review is intended for readers who wish to get a broad understanding of applied nuclear physics.

  12. Future applications of heterostructures

    Science.gov (United States)

    König, Ulf

    1996-01-01

    In this review the status and future of heterostructure devices is discussed. The author concentrates on III/V and Si/SiGe. Performance and applications are folded to the data and expectations of the micro- and opto-electronic market and to the traditional Si-mainstream. New trends, i.e. the SIA-roadmap, are checked how heterodevices can fit in. Only the most attractive candidates for applications are considered, i.e. the heterobipolar-, the hetero field effect-transistors, the resonant tunnel diode and to a less extent, some optoelectronic devices. Considered figures of merit are frequencies, transconductance, noise at high and low frequencies, threshold voltage, power delay, threshold current and quantum efficiencies. It is pointed out how to optimize those by material and design. Extrapolations to the future potential of heterodevices are made, just taking the claimed scaling of lateral dimensions into consideration. Field of applications are presented, where heterodevices offer exclusive qualities, i.e. high frequency transmission and sensors, and new mixed systems. In the case of logic the trend goes to nanoscaled devices and ICs targeting nanoelectronics beyond traditional electronics. Heterostructure layers allow a vertical nanoscaling and thus give an additional degree of freedom for designing and optimation. It is an attractive challenge for scientists and engineers to solve the related technological problems like thin, low thermal budget oxides, like defect free buffer layers etc. Special attention is put on Si/SiGe, which is now on an upswing in electronics and photonics.

  13. Radioisotopes for medical applications

    Energy Technology Data Exchange (ETDEWEB)

    Carr, S. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia). Radiopharmaceuticals Division

    1998-03-01

    For more than 3 decades, the Australian Nuclear Science and Technology Organisation has been the country`s main supplier of radioisotopes for medical applications. The use of radioisotopes in medicine has revolutionised the diagnosis, management and treatment of many serious diseases such as cancer, heart disease and stroke. It is also beginning to play a key role in neurological disorders such as Parkinson and Alzheimers disease and epilepsy. More recently there has been considerable growth in the application of nuclear medicine to treat sport-related injuries - especially wrist, ankle and knees where more common techniques do not always enable accurate diagnosis. Australia is a recognised leader in nuclear medicine. This can be partially attributed to the close relationship between ANSTO and the medical community in providing opportunities to develop and evaluate new agents to support more effective patient care. A list of commercial isotopes produced in the reactor or the cyclotron and used in medical applications is given. Nuclear medicine plays an important role in the clinical environment and the timely supply of radioisotopes is a key element. ANSTO will continue to be the premier supplier of currently available and developing isotopes to support the health and well being of the Australian community 2 tabs., 1 fig.

  14. Transactional Network Platform: Applications

    Energy Technology Data Exchange (ETDEWEB)

    Katipamula, Srinivas; Lutes, Robert G.; Ngo, Hung; Underhill, Ronald M.

    2013-10-31

    In FY13, Pacific Northwest National Laboratory (PNNL) with funding from the Department of Energy’s (DOE’s) Building Technologies Office (BTO) designed, prototyped and tested a transactional network platform to support energy, operational and financial transactions between any networked entities (equipment, organizations, buildings, grid, etc.). Initially, in FY13, the concept demonstrated transactions between packaged rooftop air conditioners and heat pump units (RTUs) and the electric grid using applications or "agents" that reside on the platform, on the equipment, on a local building controller or in the Cloud. The transactional network project is a multi-lab effort with Oakridge National Laboratory (ORNL) and Lawrence Berkeley National Laboratory (LBNL) also contributing to the effort. PNNL coordinated the project and also was responsible for the development of the transactional network (TN) platform and three different applications associated with RTUs. This document describes two applications or "agents" in details, and also summarizes the platform. The TN platform details are described in another companion document.

  15. IMS applications analysis

    Energy Technology Data Exchange (ETDEWEB)

    RODACY,PHILIP J.; REBER,STEPHEN D.; SIMONSON,ROBERT J.; HANCE,BRADLEY G.

    2000-03-01

    This report examines the market potential of a miniature, hand-held Ion Mobility Spectrometer. Military and civilian markets are discussed, as well as applications in a variety of diverse fields. The strengths and weaknesses of competing technologies are discussed. An extensive Ion Mobility Spectrometry (IMS) bibliography is included. The conclusions drawn from this study are: (1) There are a number of competing technologies that are capable of detecting explosives, drugs, biological, or chemical agents. The IMS system currently represents the best available compromise regarding sensitivity, specificity, and portability. (2) The military market is not as large as the commercial market, but the military services are more likely to invest R and D funds in the system. (3) Military applications should be addressed before commercial applications are addressed. (4) There is potentially a large commercial market for rugged, hand-held Ion Mobility Spectrometer systems. Commercial users typically do not invest R and D funds in this type of equipment rather, they wait for off-the-shelf availability.

  16. [The applicability of results].

    Science.gov (United States)

    Marín-León, I

    2015-11-01

    The ultimate aim of the critical reading of medical literature is to use the scientific advances in clinical practice or for innovation. This requires an evaluation of the applicability of the results of the studies that have been published, which begins with a clear understanding of these results. When the studies do not provide sufficient guarantees of rigor in design and analysis, the conditions necessary for the applicability of the results are not met; however, the fact that the results are reliable is not enough to make it worth trying to use their conclusions. This article explains how carrying out studies in experimental or artificial conditions often moves them away from the real conditions in which they claim to apply their conclusions. To evaluate this applicability, the article proposes evaluating a set of items that will enable the reader to determine the likelihood that the benefits and risks reported in the studies will yield the least uncertainty in the clinical arena where they aim to be applied. Copyright © 2015 SERAM. Published by Elsevier España, S.L.U. All rights reserved.

  17. Comparative performance of fluorescent iron-core ballasts and electronic ballasts. Rendement comparatif des ballasts a noyau de fer et des ballasts electroniques pour eclairage fluorescent

    Energy Technology Data Exchange (ETDEWEB)

    Pasini, I

    1987-01-01

    Commercially available one- and two-lamp fluorescent luminaires were tested, and a number of electrical parameters were measured using varying combinations of lamps and either iron-core or electronic ballasts. Comprehensive photometric tests and thermal measurements were also conducted. The test results were tabulated and compared. The performance of the iron-core ballasts was found to be sufficiently close to nominally rated values to not raise concerns. Results from testing the electronic ballasts showed that the user has to be careful when selecting these ballasts, as they far exceed standard specification limits for current and voltage crest factors. All other electrical, photometric and thermal parameters are within accepted levels. An economic analysis was undertaken to determine cost benefits and payback periods for using electronic ballasts, the use of which will result in higher efficiency and lower power consumption. A project life of 20 years was assumed, and analysis was run for a power cost of $0.04/kWh. A unit made by Fyrnetics showed the lowest total annual owning and operating costs and had a payback period of 12.1 years. 13 figs., 13 tabs.

  18. Use of commercial VDMOSFETS in an electronic system subjected to radiation; Utilisation des VDMOSFETs commerciaux dans un systeme electronique soumis aux radiations

    Energy Technology Data Exchange (ETDEWEB)

    Picard, C.; Brisset, C.; Quittard, O.; Marceau, M.; Joffre, F. [CEA Saclay, Lab. d' Electronique et de Technologie de l' Informatique, LETI, 91 - Gif-sur-Yvette (France); Hoffmann, A.; Charles, J.P. [centre Lorrain d' Optique et Electronique des Solides, Supelec, 57 - Metz (France)

    1999-07-01

    This study explores the usefulness of pre-irradiation as a hardening technique for NMOS transistors. NMOS transistors have been exposed to Co-60 gamma radiation with a dose-rate of 10 krad(SiO{sub 2})/h. The pre-irradiation technique is based on 2 phenomena occurring when the polarization is negative or equals to 0: the weak shift and the saturation of the threshold voltage.

  19. Etude, par principes premiers, des effets de la correlation entre electrons sur les proprietes electroniques et magnetiques de polymeres pontes et de supraconducteurs a haute temperature critique

    Science.gov (United States)

    Pesant, Simon

    Description of complex systems by Density functional theory is treated in this thesis. First, the Density functional theory and a few functionals used to simulate cristals are presented. Specifically, the LDA and GGA functionnals are described and their limits are exposed. Furthermore, the Hubbard model as well as the LDA+U functionnal are addressed in this chapter. These methods enable the study of highly correlated materials. Then, results obtained on polymers are summarized in two articles. The first one treats the band gap variation of ladder-type polymers compared to non ladder type ones. The second article considers small band gap polymers. In this case, it will be shown that an hybrid functional, which contains exact exchange, is required to describe the electronic properties of the polymers under study. Finally, the last chapter address the study of cuprates superconductors. The LDA+U can account for the localization of electrons in copper orbitals. Consequently, a study of the impact of this functionnal on electronic properties of cuprates is conducted. The chapter is ended by an article treating magnetic orders in doped La 2CuO4. Supplementary materials of the second article and a description of the theory of superconductivity of Bardeen, Cooper and Schrieffer are put in annex. Keywords : Electronic correlation, DFT, LDA+U, cuprates, polymers, magnetic orders

  20. Study of the electron heat transport in Tore-Supra tokamak; Etude du transport de la chaleur electronique dans le Tokamak Tore Supra

    Energy Technology Data Exchange (ETDEWEB)

    Harauchamps, E

    2004-07-01

    This work presents analytical solutions to the electron heat transport equation involving a damping term and a convection term in a cylindrical geometry. These solutions, processed by Matlab, allow the determination of the evolution of the radial profile of electron temperature in tokamaks during heating. The modulated injection of waves around the electron cyclotron frequency is an efficient tool to study heat transport experimentally in tokamaks. The comparison of these analytical solutions with experimental results from Tore-Supra during 2 discharges (30550 and 31165) shows the presence of a sudden change for the diffusion and damping coefficients. The hypothesis of the presence of a pinch spread all along the plasma might explain the shape of the experimental temperature profiles. These analytical solutions could be used to determine the time evolution of plasma density as well or of any parameter whose evolution is governed by a diffusion-convection equation. (A.C.)

  1. New generation of monolithic active pixel sensors for charged particle detection; Developpement d'un capteur de nouvelle generation et son electronique integree pour les collisionneurs futurs

    Energy Technology Data Exchange (ETDEWEB)

    Deptuch, G

    2002-09-01

    Vertex detectors are of great importance in particle physics experiments, as the knowledge of the event flavour is becoming an issue for the physics programme at Future Linear Colliders. Monolithic Active Pixel Sensors (MAPS) based on a novel detector structure have been proposed. Their fabrication is compatible with a standard CMOS process. The sensor is inseparable from the readout electronics, since both of them are integrated on the same, low-resistivity silicon wafer. The basic pixel configuration comprises only three MOS transistors and a diode collecting the charge through thermal diffusion. The charge is generated in the thin non-depleted epitaxial layer underneath the readout electronics. This approach provides, at low cost, a high resolution and thin device with the whole area sensitive to radiation. Device simulations using the ISE-TCAD package have been carried out to study the charge collection mechanism. In order to demonstrate the viability of the technique, four prototype chips have been fabricated using different submicrometer CMOS processes. The pixel gain has been calibrated using a {sup 55}Fe source and the Poisson sequence method. The prototypes have been exposed to high-energy particle beams at CERN. The tests proved excellent detection performances expressed in a single-track spatial resolution of 1.5 {mu}m and detection efficiency close to 100%, resulting from a SNR ratio of more than 30. Irradiation tests showed immunity of MAPS to a level of a few times 10{sup 12} n/cm{sup 2} and a few hundred kRad of ionising radiation. The ideas for future work, including on-pixel signal amplification, double sampling operation and current mode pixel design are present as well. (author)

  2. Study of luminous emissions associated to electron emissions in radiofrequency cavities; Etude des emissions lumineuses associees aux emissions electroniques dans les cavites hyperfrequences

    Energy Technology Data Exchange (ETDEWEB)

    Maissa, S

    1996-11-26

    This study investigates luminous emissions simultaneously to electron emissions and examines their features in order to better understand the field electron emission phenomenon. A RF cavity, operating at room temperature and in pulsed mode, joined to a sophisticated experimental apparatus has been especially developed. The electron and luminous emissions are investigated on cleaned or with metallic, graphitic and dielectric particles contaminated RF surfaces in order to study their influence on these phenomena. During the surface processing, unstable luminous spots glowing during one RF pulse are detected. Their apparition is promoted in the vicinity of the metallic particles or scratches. Two hypotheses could explain their origin: the presence of micro-plasmas associated to electronic explosive emission during processing or the thermal radiation of the melted metal during this emission. Stable luminous spots glowing during several RF pulses are also detected and appear to increase on RF surfaces contaminated with dielectric particles, leading to strong and explosive luminous emissions. Two interpretations are considered: the initiation of surface breakdowns on the dielectric particles or the heating by the RF field at temperatures sufficiently intense to provoke their thermal radiation then their explosion. Finally a superconducting cavity has been adapted to observe luminous spots, which differ from the former ones bu their star shape and could be associated to micro-plasmas, revealed by the starbursts observed on superconducting cavity walls. (author) 102 refs.

  3. Semiconductor GaAs: electronic paramagnetic resonance new data; GaAs semi-isolant: nouvelles donnees de resonance paramagnetique electronique

    Energy Technology Data Exchange (ETDEWEB)

    Benchiguer, T.

    1994-04-01

    The topic of this study was to put to the fore, thanks to our electron spin resonance experiments, one charge transfer process, which was optically induced between the deep donor As{sup +}{sub G}a and the different acceptors, which were present in the material. We described these processes through a theoretical model, which we named charge transfer model. With this latter, we were able to trace a graph network, representing the As{sup +}{sub G}a concentration kinetics. Then we verified the compatibility of our model with one transport experiment. One experimental verification of our model were delivered, thanks to neutronic transmutation doping. The following stage was the study of defects, induced by thermal strains, to which the crystal was submitted during the cooling phase. At last we wanted to get round the non solved super hyperfine structure problem for GaAs by studying another III-V material for which she was resolved, namely gallium phosphide. (MML). 150 refs., 72 figs., 16 tabs., 3 annexes.

  4. Conducting polymers and hybrid nano-materials for electrochemical storage; Polymeres conducteurs electroniques et nanomateriaux hybrides pour le stockage de l'energie

    Energy Technology Data Exchange (ETDEWEB)

    Mallouki, M.

    2006-02-15

    In this work, we report first on the preparation of nano-structures based on poly-pyrrole and iron oxide nano-particles by oxidative polymerisation of pyrrole in colloidal solution of Fe{sub 2}O{sub 3}. The conductivity and the morphology of nano-composites were studied and related to the doping agent role and the weight ratio (Fe{sub 2}O{sub 3}/PPy). The specific capacity measurement on the composite electrode (based on the nano-composite, acetylene black and binders) indicate a significant enhancement of charge storage for nano-composites compared to pure poly-pyrrole. Then, we investigated the synthesis and characterisation of composite electrode based on poly 3-methyl-thiophene (PMeT), which depend on different methods of preparation, electrolyte and doping potential. Finally, a room temperature ionic liquid (RTIL) such as imidazolium tri-fluoro-methane-sulfonimide (EMITFSI), was used and seem to be a promising electrolyte since it increases further the capacity with a high stability during charge-discharge processes. (author)

  5. Efficiency evaluation of an electronic equipment: availability,reliability and maintenance; Notion d'efficacite d'un equipement electronique: disponibilite, fiabilite et maintenabilite

    Energy Technology Data Exchange (ETDEWEB)

    Guyot, C

    1966-07-01

    This concept of efficiency often called ''system effectiveness'', is presented and analyzed in terms of reliability and maintenance. It allows to define the availability factor of an electronic equipment. A procedure of evaluation is proposed. (A.L.B.)

  6. Design and electronic power supply of double salience variable reluctance machines; Conception et alimentation electronique des machines a reluctance variable a double saillance

    Energy Technology Data Exchange (ETDEWEB)

    Multon, B

    1994-05-15

    This work deals with the optimization of double salience variable reluctance motors with electronic switching. It includes the control laws, the electromagnetic structure and the direct and indirect self-driving sensors. The first chapter presents the state-of-the-art of double salience reluctance machines, their characteristics, their inverters and the evolutions of their electromagnetic structure. Chapters 2 and 3 treat of the optimization of power supplies and of the electromagnetic structure, respectively. Finally, the last chapter treats of original solutions of position measurement for the self-control, one using a variable reluctance sensor, and the other using an indirect sensor. The impact of the motor characteristics on the power supply has been analyzed with the optimization of the control laws in permanent regime and low torque undulation regime. The influence of the motor structure geometry on the electromagnetic characteristics has been studied using analytic methods coupled with punctual finite-element calculations. Using a particular example, a self-oscillating power supply mode has been implemented in order to reduce the losses and the electromagnetic pollution. (J.S.)

  7. Semiconductor device models for circuit simulation power electronics; Modeles de composants semiconducteurs pour la simulation des circuits en electronique de puissance

    Energy Technology Data Exchange (ETDEWEB)

    Berraies, M.O.

    1998-09-10

    In this thesis, an alternative strategy based on a regional approach to modeling and a new partition of the model library in the simulation is proposed. The main objective is to substitute for the usual concept of `one device, on model` that of an adaptable assembly of a limited number of submodels associated with well-identified regions of semiconductor structures. In other words, the library will only contain the primitive building-blocks of the power device models. This strategy guarantees the compatibility of the various semiconductor models in terms of physical concepts, validity domain, accuracy, homogeneity of parameter identification procedures, similarly of implementation in the simulator. This approach has been applied to PIN diodes and IGBTs for experimental validation. The next step consisted on the simulation of circuit involving several interacting devices. A simple IGBT/PIN diode chopper cell has been chosen. The results obtained compare well with experiment. This demonstrates the consistency of the proposed approach. (author) 43 refs.

  8. Numerical study of the atomic and electronic structure of some silicon grain boundaries; Etude numerique de la structure atomique et electronique de quelques joints de grains du silicium

    Energy Technology Data Exchange (ETDEWEB)

    Torrent, M

    1996-07-01

    This work contributes to the theoretical study of extended defects in covalent materials. The study is especially devoted to the tilt grain boundaries in silicon as a model material. The theoretical model is based on the self-consistent tight-binding approximation and is applied within two numerical techniques: the fast 'order N' density-matrix method and the diagonalization technique which allows the sampling of the reciprocal space. Total energy parameters of the model have been fitted in order to reproduce the silicon band structure (with a correct gap value) and the transferability of crystalline and mechanical properties of this material. A new type of boundary conditions is proposed and tested. These conditions, named 'ante-periodic' or 'Moebius', allow only one grain boundary per box instead of two and decrease the CPU time by a factor of two. The model is then applied to the study of the {sigma}=25 [001] (710) grain boundary. The results show the possible presence in this boundary of low energy non-reconstructed atomic structures which are electrically active. This confirms what had been suggested by some experimental observations. The same study is also performed for the {sigma}=13 [001] (510) grain boundary. In order to compare the intrinsic electrical activity in the previous grain boundaries with the one induced by impurities, a total energy parametrization for the silicon-nickel bond is achieved and used in preliminary calculations. Finally the two variants of the {sigma}=11 [011] (2-33) interface are studied, especially their respective interfacial energies. The result disagrees with previous calculations using phenomenological potentials. (author)

  9. Conference Proceedings of Machine Intelligence for Aerospace Electronic Systems Held in Lisbon, Portugal on 13-16 May 1991 (L’Intelligence Artificielle dans les Systemes Electroniques Aerospatiaux)

    Science.gov (United States)

    1991-09-01

    primrily in the diagnostic Response to Theme (3). The MI programs of and navigation arena . Also, a USA Navy the future will provide choices for the program...a software research arena ) from which to chose; engineering tool. however, there was a sufficient amount of activity to report from each member nation...weights Z W2 X2.6 2 vProcessingn W Element " °tu X m n (Neuron) VIAJ X X 1n 91-15516’IIIIIIII 9-4 Each processing element may have many input signals

  10. The promises of fuel cells seduce the electronics manufacturers; Les promesses des piles a combustible seduisent les geants de l'electronique

    Energy Technology Data Exchange (ETDEWEB)

    Chalmet, E.; Maridet, R.

    2001-07-01

    The cell using the hydrogen seems to be an attractive alternative energy source. Useful for the portable telephones, the automobiles or in the houses, it may cover a market of 60 milliards of dollars in 2010. (A.L.B.)

  11. Conducting polymers and hybrid nano-materials for electrochemical storage; Polymeres conducteurs electroniques et nanomateriaux hybrides pour le stockage de l'energie

    Energy Technology Data Exchange (ETDEWEB)

    Mallouki, M

    2006-02-15

    In this work, we report first on the preparation of nano-structures based on poly-pyrrole and iron oxide nano-particles by oxidative polymerisation of pyrrole in colloidal solution of Fe{sub 2}O{sub 3}. The conductivity and the morphology of nano-composites were studied and related to the doping agent role and the weight ratio (Fe{sub 2}O{sub 3}/PPy). The specific capacity measurement on the composite electrode (based on the nano-composite, acetylene black and binders) indicate a significant enhancement of charge storage for nano-composites compared to pure poly-pyrrole. Then, we investigated the synthesis and characterisation of composite electrode based on poly 3-methyl-thiophene (PMeT), which depend on different methods of preparation, electrolyte and doping potential. Finally, a room temperature ionic liquid (RTIL) such as imidazolium tri-fluoro-methane-sulfonimide (EMITFSI), was used and seem to be a promising electrolyte since it increases further the capacity with a high stability during charge-discharge processes. (author)

  12. Numerical study of the atomic and electronic structure of some silicon grain boundaries; Etude numerique de la structure atomique et electronique de quelques joints de grains du silicium

    Energy Technology Data Exchange (ETDEWEB)

    Torrent, M

    1996-07-01

    This work contributes to the theoretical study of extended defects in covalent materials. The study is especially devoted to the tilt grain boundaries in silicon as a model material. The theoretical model is based on the self-consistent tight-binding approximation and is applied within two numerical techniques: the fast 'order N' density-matrix method and the diagonalization technique which allows the sampling of the reciprocal space. Total energy parameters of the model have been fitted in order to reproduce the silicon band structure (with a correct gap value) and the transferability of crystalline and mechanical properties of this material. A new type of boundary conditions is proposed and tested. These conditions, named 'ante-periodic' or 'Moebius', allow only one grain boundary per box instead of two and decrease the CPU time by a factor of two. The model is then applied to the study of the {sigma}=25 [001] (710) grain boundary. The results show the possible presence in this boundary of low energy non-reconstructed atomic structures which are electrically active. This confirms what had been suggested by some experimental observations. The same study is also performed for the {sigma}=13 [001] (510) grain boundary. In order to compare the intrinsic electrical activity in the previous grain boundaries with the one induced by impurities, a total energy parametrization for the silicon-nickel bond is achieved and used in preliminary calculations. Finally the two variants of the {sigma}=11 [011] (2-33) interface are studied, especially their respective interfacial energies. The result disagrees with previous calculations using phenomenological potentials. (author)

  13. Adaptation to the electronics of fast and highly efficient fission chambers; Adaptation a l'electronique de chambres a fission rapides et de grande efficacite

    Energy Technology Data Exchange (ETDEWEB)

    Buisson, Jacques

    1968-09-04

    When designing a fast and highly efficient sensor, not only optimal values of the sensor per se (nature of the filling gas, pressure, electric field, etc.), but also its adaptation to the cable of connection to the electronics must be taken into account. The author reports the development of the expression of the characteristic impedance of fission chambers and the determination of elementary tubes. He reports the theoretical study of the amplitude of pulses produced by a sensor in the case of a non-adapted sensor and in the case of an adapted sensor. It appears that an adapted chamber does not possess only benefits, but is an interesting solution only when the sensor collection time is very short and when the compliance with its speed is the essential objective. Some recommendations are made for the electronics characteristics, and for the connection cable (very low losses, which means a greater diameter than the current one)

  14. Materials contamination control in the microelectronic industry; Controle de la contamination des materiaux dans l`industrie de la micro-electronique

    Energy Technology Data Exchange (ETDEWEB)

    Tardif, F

    1994-12-31

    This paper deals with many aspects of the contamination of materials in the microelectronic industry. The contamination`s control of chemicals, process gases, silicon and the survey of the ions free water`s purity are treated. (TEC). 29 figs., 7 tabs.

  15. Theoretical and experimental study of cyclotronic waves in a fusion plasma; Etude theorique et experimentale des ondes cyclotroniques electroniques dans un plasma de fusion

    Energy Technology Data Exchange (ETDEWEB)

    Vezard, D

    1994-12-20

    This thesis presents a study concerning cyclotronic waves in a plasma. It starts with an illustration of the elementary interaction between electromagnetic waves and matter.It shows that electrons from tokamak absorbs waves at cyclotronic frequency. Cyclotronic waves are studied by solving the dispersion relation in plasma; it concerns polarisation, absorption, dispersion, extinction. Then, classical theories are reminded in order to speak about decoupled electrons and their interactions. Absorption and emission properties of cyclotronic waves by electrons from a queue are described. After that, cyclotronic waves propagation is studied taking into account resonance. The last part of this thesis is dedicated to the electronic distribution function that is made by a wave spectra at a inferior hybrid frequency. (TEC). 129 refs., 75 figs.

  16. New generation of monolithic active pixel sensors for charged particle detection; Developpement d'un capteur de nouvelle generation et son electronique integree pour les collisionneurs futurs

    Energy Technology Data Exchange (ETDEWEB)

    Deptuch, G

    2002-09-01

    Vertex detectors are of great importance in particle physics experiments, as the knowledge of the event flavour is becoming an issue for the physics programme at Future Linear Colliders. Monolithic Active Pixel Sensors (MAPS) based on a novel detector structure have been proposed. Their fabrication is compatible with a standard CMOS process. The sensor is inseparable from the readout electronics, since both of them are integrated on the same, low-resistivity silicon wafer. The basic pixel configuration comprises only three MOS transistors and a diode collecting the charge through thermal diffusion. The charge is generated in the thin non-depleted epitaxial layer underneath the readout electronics. This approach provides, at low cost, a high resolution and thin device with the whole area sensitive to radiation. Device simulations using the ISE-TCAD package have been carried out to study the charge collection mechanism. In order to demonstrate the viability of the technique, four prototype chips have been fabricated using different submicrometer CMOS processes. The pixel gain has been calibrated using a {sup 55}Fe source and the Poisson sequence method. The prototypes have been exposed to high-energy particle beams at CERN. The tests proved excellent detection performances expressed in a single-track spatial resolution of 1.5 {mu}m and detection efficiency close to 100%, resulting from a SNR ratio of more than 30. Irradiation tests showed immunity of MAPS to a level of a few times 10{sup 12} n/cm{sup 2} and a few hundred kRad of ionising radiation. The ideas for future work, including on-pixel signal amplification, double sampling operation and current mode pixel design are present as well. (author)

  17. Hybrid electric vehicle thermal management and study of the power electronics cooling; Gestion thermique du vehicule hybride et etude du refroidissement de l'electronique de puissance

    Energy Technology Data Exchange (ETDEWEB)

    Rouaud, C.

    2004-07-01

    For decreasing the engine's consumption and pollutant emissions, automobile makers are developing hybrid electric vehicles incorporating an electric motor and power electronics leading to new under-hood thermal constraints. This is why we first present the tests results of a new common cooling circuit for all the vehicle components. With the aim of developing new energy management strategies between the components, we have chosen the nodal method to simulate the thermal behaviour of the engine, the electric motor, the power electronics and the cooling circuit. The second part of this thesis deals with a thermal-hydraulic analysis of several power electronics cooling methods, which has led us to choose the multiple jet impingement cooling. Several tests have been made for characterising the performances of this technique and enabled us to establish an optimal configuration. The last part shows the thermal simulation results run with the help of an innovative reduction method of thermal models applied to the power electronics. This technique allowed us to have a low cost of time simulation and will permit, in the future, the real-time control of the hybrid electric vehicle components. (author)

  18. Monitoring of the current profile by using cyclotronic electron waves in tokamaks; Controle du profil de courant par ondes cyclotroniques electroniques dans les tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Dumont, R

    2001-08-01

    The subject of this thesis is the study of the cyclotronic electron wave as a monitoring tool of the current profile. The first chapter is dedicated to basic notions concerning tokamak plasmas and current generation. The second chapter is centered on the use of fast electrons to generate current and on its modelling. The propagation and absorption of the cyclotronic electron wave require a specific polarization state whose characteristics must be carefully chosen according to some parameters of the discharge, the chapter 3 deals with this topic. The absorption of a wave in a plasma depends greatly on the velocity distribution of the particles that make up the plasma and this distribution is constantly modified by the energy of the wave, so this phenomenon is non-linear and its physical description is difficult. In a case of a fusion plasma, a sophisticated approximation called quasi-linear theory can be applied with some restrictions that are presented in chapter 4. Chapters 5 and 6 are dedicated to kinetics scenarios involving the low hybrid wave and the cyclotronic electron wave inside the plasma. Some experiments dedicated to the study of the cyclotronic electron wave have been performed in Tore-supra (France) and FTU (Italy) tokamaks, they are presented in the last chapter. (A.C.)

  19. WAP - based telemedicine applications

    International Nuclear Information System (INIS)

    Hung, K.; Zhang, Y.T.

    2001-01-01

    Telemedicine refers to the utilization of telecommunication technology for medical diagnosis, treatment, and patient care. Its aim is to provide expert-based health care to remote sites through telecommunication and information technologies. The significant advances in technologies have enabled the introduction of a broad range of telemedicine applications, which are supported by computer networks, wireless communication, and information superhighway. For example, some hospitals are using tele-radiology for remote consultation. Such a system includes medical imaging devices networked with computers and databases. Another growing area is patient monitoring, in which sensors are used to acquire biomedical signals, such as electrocardiogram (ECG), blood pressure, and body temperature, from a remote patient, who could be in bed or moving freely. The signals are then relayed to remote systems for viewing and analysis. Telemedicine can be divided into two basic modes of operations: real-time mode, in which the patient data can be accessed remotely in real-time, and store-and-forward mode, in which the acquired data does not have to be accessed immediately. In the recent years, many parties have demonstrated various telemedicine applications based on the Internet and cellular phone as these two fields have been developing rapidly. A current, recognizable trend in telecommunication is the convergence of wireless communication and computer network technologies. This has been reflected in recently developed telemedicine systems. For example, in 1998 J. Reponen, et al. have demonstrated transmission and display of computerized tomography (CT) examinations using a remote portable computer wirelessly connected to a computer network through TCP/IP on a GSM cellular phone. Two years later, they carried out the same tests with a GSM-based wireless personal digital assistant (PDA). The WAP (Wireless Application Protocol) Forum was founded in 1997 to create a global protocol

  20. Creation of web applications by Rich Internet Application Adobe Flex

    OpenAIRE

    PEKA, Karel

    2011-01-01

    Bachelor work focuses on explaining the functions and development of interactive applications in Adobe Flex RIA also compared to similar web technologies such as AJAX, Microsoft Silverlight or Adobe Flash. Explain the difference between "ordinary" sites and Rich Internet Application (RIA) and the difference shows a series of demonstration examples were processed in Adobe Flash Builder (environment for building Flex applications). Also will be created large-scale application for comprehensive ...

  1. Game theory and its applications

    CERN Document Server

    Matsumoto, Akio

    2015-01-01

    This book integrates the fundamentals, methodology and major application fields of noncooperative and cooperative games, including conflict resolution. It includes a wide range of applications in many different areas, from economics to homeland security.

  2. Applications of Nano-optics.

    Science.gov (United States)

    Zhou, Changhe; Fainman, Yeshaiahu; Sheng, Yunlong

    2011-11-01

    As nanoscale fabrication techniques advance, nano-optics continues to offer enabling solutions to numerous practical applications for information optics. This Applied Optics feature issue focuses on the Application of Nano-optics. © 2011 Optical Society of America

  3. Ultrabroadband spectroscopy for security applications

    DEFF Research Database (Denmark)

    Engelbrecht, Sunniva; Berge, Luc; Skupin, Stefan

    2015-01-01

    Ultrabroadband spectroscopy is a promising novel approach to overcome two major hurdles which have so far limited the application of THz spectroscopy for security applications: the increased bandwidth enables to record several characteristic spectroscopic features and the technique allows...

  4. Android application development with Maven

    CERN Document Server

    Papapetrou, Patroklos

    2015-01-01

    Android Application Development with Maven is intended for Android developers or devops engineers who want to use Maven to effectively develop quality Android applications. It would be helpful, but not necessary, if you have some previous experience with Maven.

  5. Manure application and ammonia volatilization

    NARCIS (Netherlands)

    Huijsmans, J.F.M.

    2003-01-01

    Keywords: manure application, ammonia volatilization, environmental conditions, application technique, incorporation technique, draught force, work organization, costs Livestock manure applied on farmland is an important source of ammonia (NH3) volatilization, and NH3 is a major atmospheric

  6. E-commerce Smartphone Application

    OpenAIRE

    Abdullah Saleh Alqahtani; Robert Goodwin

    2012-01-01

    Mobile and e-commerce applications are tools for accessing the Internet and for buying products and services. These applications are constantly evolving due to the high rate of technological advances being made. This paper provides a new perspective on the types of applications that can be used. It describes and analyses device requirements, provides a literature review of important aspects of mobile devices that can use such applications and the requirements of websites designed for m-commer...

  7. Developing iPhone application

    OpenAIRE

    Nebo, Charles

    2015-01-01

    IPhone application popularity and demand are continuously on the increase since 2008 when Apple launched iPhone. Consequently, many applications are built targeting different user needs. But developing iPhone applications do have challenges. This research study explores current development study for developing iPhone application where the development environment and technologies are problematic. This paper intends to review some software development methodologies, methods, and techniques for ...

  8. Applications of nonlinear fiber optics

    CERN Document Server

    Agrawal, Govind

    2008-01-01

    * The only book describing applications of nonlinear fiber optics * Two new chapters on the latest developments: highly nonlinear fibers and quantum applications* Coverage of biomedical applications* Problems provided at the end of each chapterThe development of new highly nonlinear fibers - referred to as microstructured fibers, holey fibers and photonic crystal fibers - is the next generation technology for all-optical signal processing and biomedical applications. This new edition has been thoroughly updated to incorporate these key technology developments.The bo

  9. Finite mathematics models and applications

    CERN Document Server

    Morris, Carla C

    2015-01-01

    Features step-by-step examples based on actual data and connects fundamental mathematical modeling skills and decision making concepts to everyday applicability Featuring key linear programming, matrix, and probability concepts, Finite Mathematics: Models and Applications emphasizes cross-disciplinary applications that relate mathematics to everyday life. The book provides a unique combination of practical mathematical applications to illustrate the wide use of mathematics in fields ranging from business, economics, finance, management, operations research, and the life and social sciences.

  10. Quality Analysis of Mobile Applications

    Directory of Open Access Journals (Sweden)

    Ion IVAN

    2011-01-01

    Full Text Available Mobile applications are defined and different types of mobile applications are identified. Characteristics of quality are defined and their indicators are constructed to measure levels. Take into account 11 parameters analysis for mobile applications, which are arranged using weights and do a detailed analysis of the system of weights. For SMSEncrypt application performance measurement is done using an aggregate indicator based on the obtained weights system.

  11. Applications of Research Reactors

    International Nuclear Information System (INIS)

    2014-01-01

    One of the IAEA's statutory objectives is to 'seek to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world.' One way this objective is achieved is through the publication of a range of technical series. Two of these are the IAEA Nuclear Energy Series and the IAEA Safety Standards Series. According to Article III.A.6 of the IAEA Statute, the safety standards establish 'standards of safety for protection of health and minimization of danger to life and property'. The safety standards include the Safety Fundamentals, Safety Requirements and Safety Guides. These standards are written primarily in a regulatory style, and are binding on the IAEA for its own programmes. The principal users are the regulatory bodies in Member States and other national authorities. The IAEA Nuclear Energy Series comprises reports designed to encourage and assist R and D on, and application of, nuclear energy for peaceful uses. This includes practical examples to be used by owners and operators of utilities in Member States, implementing organizations, academia, and government officials, among others. This information is presented in guides, reports on technology status and advances, and best practices for peaceful uses of nuclear energy based on inputs from international experts. The IAEA Nuclear Energy Series complements the IAEA Safety Standards Series. The purpose of the earlier publication, The Application of Research Reactors, IAEA-TECDOC-1234, was to present descriptions of the typical forms of research reactor use. The necessary criteria to enable an application to be performed were outlined for each one, and, in many cases, the minimum as well as the desirable requirements were given. This revision of the publication over a decade later maintains the original purpose and now specifically takes into account the changes in service requirements demanded by the relevant stakeholders. In particular, the significant improvements in

  12. Applicant Perspectives on the Otolaryngology Residency Application Process

    Science.gov (United States)

    2017-09-09

    ndorsing, Suggestion No.(%) (n=98) Establish a hard cap on the number of applications 43 (43.8) altov:ed per applicant Increase information and...Applicants are overall amenable to a hard cap on applicationsApplicants are interested in being part of the solution to the problem References...better the chances of match·ng. Alch Otoo1yngo/ Head~:< Surg_ 2008: 4 34(10)·1038. 3. Christophel JJ. Levine PA Too much of .a good thing . lAMA

  13. PSO-Ensemble Demo Application

    DEFF Research Database (Denmark)

    2004-01-01

    Within the framework of the PSO-Ensemble project (FU2101) a demo application has been created. The application use ECMWF ensemble forecasts. Two instances of the application are running; one for Nysted Offshore and one for the total production (except Horns Rev) in the Eltra area. The output...

  14. Pervasive Application Rights Management Architecture

    OpenAIRE

    Dusparic, Ivana

    2005-01-01

    This dissertation describes an application rights management architecture that combines license management with digital rights management to provide an integrated platform for the specification, generation, delivery and management of application usage rights for pervasive computing environments. A new rights expression language is developed, extended from the existing language, ODRL, which allows the expression of mobile application usage rights and supports fine-grained usage ...

  15. MHD pilot industrial applications

    International Nuclear Information System (INIS)

    Freeman, M.; Riviere-Wekstein, G.

    1994-01-01

    MHD industrial applications (and their historical developments) are sketched in the fields of nuclear fission, nuclear fusion and marine vehicles propelling. Nuclear fission projects resulted in promising prototypes between 1972 and 1980, especially for liquid-metal MHD generators. All of them have been stopped by the scientific policies of the governments. Nuclear fusion projects used mainly the equilibrium plasma of tokamak type reactors; some military projects used pulsed plasma to perform pulsed MHD generators. Marine vehicle propelling is the most advanced field. By june 1992, the japanese sea-going boat 'Yamato 1' was sailing with two MHD propellers. A few months later, the building of 'Yamato 2' has begun

  16. Biomedical applications of batteries

    Energy Technology Data Exchange (ETDEWEB)

    Latham, Roger [Faculty of Health and Life Sciences, De Montfort University, The Gateway, Leicester, LE1 9BH (United Kingdom); Linford, Roger [The Research Office, De Montfort University, The Gateway, Leicester, LE1 9BH (United Kingdom); Schlindwein, Walkiria [School of Pharmacy, De Montfort University, The Gateway, Leicester, LE1 9BH (United Kingdom)

    2004-08-31

    An overview is presented of the many ways in which batteries and battery materials are used in medicine and in biomedical studies. These include the use of batteries as power sources for motorised wheelchairs, surgical tools, cardiac pacemakers and defibrillators, dynamic prostheses, sensors and monitors for physiological parameters, neurostimulators, devices for pain relief, and iontophoretic, electroporative and related devices for drug administration. The various types of battery and fuel cell used for this wide range of applications will be considered, together with the potential harmful side effects, including accidental ingestion of batteries and the explosive nature of some of the early cardiac pacemaker battery systems.

  17. Games, theory and applications

    CERN Document Server

    Thomas, L C

    2011-01-01

    Anyone with a knowledge of basic mathematics will find this an accessible and informative introduction to game theory. It opens with the theory of two-person zero-sum games, two-person non-zero sum games, and n-person games, at a level between nonmathematical introductory books and technical mathematical game theory books. Succeeding sections focus on a variety of applications - including introductory explanations of gaming and meta games - that offer nonspecialists information about new areas of game theory at a comprehensible level. Numerous exercises appear with full solutions, in addition

  18. Applications in solid mechanics

    DEFF Research Database (Denmark)

    Ølgaard, Kristian Breum; Wells, Garth N.

    2012-01-01

    Problems in solid mechanics constitute perhaps the largest field of application of finite element methods. The vast majority of solid mechanics problems involve the standard momentum balance equation, posed in a Lagrangian setting, with different models distinguished by the choice of nonlinear...... or linearized kinematics, and the constitutive model for determining the stress. For some common models, the constitutive relationships are rather complex. This chapter addresses a number of canonical solid mechanics models in the context of automated modeling, and focuses on some pertinent issues that arise...

  19. Heroku cloud application development

    CERN Document Server

    Hanjura, Anubhav

    2014-01-01

    An easy-to-follow, hands-on guide that clearly explains the various components of the Heroku platform and provides step-by-step guidance as well as numerous examples on how to build and troubleshoot robust and scalable production-ready web applications on the Heroku platform.This book is intended for those who want to learn Heroku the right way. Perhaps you are new to Heroku or are someone who has heard about Heroku but have not built anything significant with it. You should have knowledge or familiarity with cloud computing and basic knowledge of database and network deployment.

  20. Cold regions isotope applications

    International Nuclear Information System (INIS)

    Perrigo, L.D.; Divine, T.E.

    1976-04-01

    Pacific Northwest Laboratories (PNL) started the Cold Regions Isotope Applications Program in FY-1975 to identify special conditions in the Arctic and similar geographic areas (Cold Regions) where radioisotope power, heater, or sterilization systems would be desirable and economically viable. Significant progress was made in the first year of this program and all objectives for this initial 12-month period were achieved. The major conclusions and recommendations resulting for this effort are described below. The areas of interest covered include: radiosterilization of sewage; heating of septic tanks; and radioisotope thermoelectric generators as power sources for meteorological instruments and navigational aids

  1. Nuclear cratering applications

    International Nuclear Information System (INIS)

    Williamson, M.M.

    1969-01-01

    The development of nuclear excavation technology is based on the promise that the relatively inexpensive energy available from thermonuclear explosives can be used to simultaneously break and move age quantities of rock and earth economically and safety. This paper discusses the economic and other advantages of using nuclear excavation for large engineering projects. A brief description of the phenomenology of nuclear excavation is given. Each of the several proposed general applications of nuclear excavation is discussed to include a few specific example of possible nuclear excavation projects. The discussion includes nuclear excavation for harbors, canals, terrain transits, aggregate production, mining and water resource development and conservation. (author)

  2. Rock engineering applications, 1991

    International Nuclear Information System (INIS)

    Franklin, J.A.; Dusseault, M.B.

    1991-01-01

    This book demonstrates how to apply the theories and principles of rock engineering to actual engineering and construction tasks. It features insights on geology for mining and tunnelling applications. It is practical resource that focuses on the latest technological innovation and examines up-to-date procedures used by engineers for coping with complex rock conditions. The authors also discuss question related to underground space, from design approaches to underground housing and storage. And they cover the monitoring of storage caverns for liquid and gaseous products or toxic and radioactive wastes

  3. Product Licenses Database Application

    CERN Document Server

    Tonkovikj, Petar

    2016-01-01

    The goal of this project is to organize and centralize the data about software tools available to CERN employees, as well as provide a system that would simplify the license management process by providing information about the available licenses and their expiry dates. The project development process is consisted of two steps: modeling the products (software tools), product licenses, legal agreements and other data related to these entities in a relational database and developing the front-end user interface so that the user can interact with the database. The result is an ASP.NET MVC web application with interactive views for displaying and managing the data in the underlying database.

  4. Mesotherapy: cosmetic applications.

    Science.gov (United States)

    Stachowski, Jill; Botts, Kayla; Rine, Lesley; Kato, Danielle; Pollock, Jennifer

    2006-01-01

    Mesotherapy, which has been compared to the anti-wrinkle injection Botox, has only recently become popular in the United States for providing body contouring and spot weight loss. Most adverse reactions associated with mesotherapy are mild and transient, and supporters of the procedure consider it a safer alternative to liposuction. Mainly owing to the absence of safety and efficacy data pertaining to mesotherapy, liposuction is currently the only method for fat removal that is endorsed by the American Society of Plastic Surgeons . Although mesotherapy has been used as a treatment for pain syndromes, arthritis, and many other disorders, this article focuses on its cosmetic applications.

  5. Shopify application development

    CERN Document Server

    Larkin, Michael

    2014-01-01

    This is an easy-to follow manual that will guide you through the entire process of application development with Shopify, beginning with the installation and configuration of your local development environment for your app to the deployment of the app to Heroku. If you are a web developer or a designer who wants to extend Shopify stores by building apps, then this book is for you. A basic understanding of programming concepts and some familiarity with Shopify is all that is required to get started with Shopify app development.

  6. Ultracapacitors for automotive applications

    Science.gov (United States)

    Ashtiani, Cyrus; Wright, Randy; Hunt, Gary

    In response to a growing consensus in the auto industry that ultracapacitors can potentially play a key role in the modern vehicle power distribution network, a task force was created at the United States Advanced Battery Consortium (USABC) to tackle issues facing the fledging industry. The task force embarked on first developing and establishing standards for performance and abuse tolerance of ultracapacitors in collaboration with the U.S. Department of Energy and National Labs. Subsequently, potential applications in the automotive industry were identified and a consensus requirement specification was drawn as a development guide for the industry.

  7. Nuclear cratering applications

    Energy Technology Data Exchange (ETDEWEB)

    Williamson, M M [U.S. Atomic Energy Commission, Germantown, MD (United States)

    1969-07-01

    The development of nuclear excavation technology is based on the promise that the relatively inexpensive energy available from thermonuclear explosives can be used to simultaneously break and move age quantities of rock and earth economically and safety. This paper discusses the economic and other advantages of using nuclear excavation for large engineering projects. A brief description of the phenomenology of nuclear excavation is given. Each of the several proposed general applications of nuclear excavation is discussed to include a few specific example of possible nuclear excavation projects. The discussion includes nuclear excavation for harbors, canals, terrain transits, aggregate production, mining and water resource development and conservation. (author)

  8. Visual languages and applications

    CERN Document Server

    Zhang, Kang

    2010-01-01

    Visual languages have long been a pursuit of effective communication between human and machine. With rapid advances of the Internet and Web technology, human-human communication through the Web or electronic mobile devices is becoming more and more prevalent. Visual Languages and Applications is a comprehensive introduction to diagrammatical visual languages. This book discusses what visual programming languages are, and how such languages and their underlying foundations can be usefully applied to other fields in computer science. It also covers a broad range of contents from the underlying t

  9. Application testing with Capybara

    CERN Document Server

    Robbins, Matthew

    2013-01-01

    Start performing integration testing with Capybara immediately. This book will get you up and running quickly and assumes no knowledge or experience of the technology.This book is for developers and testers who have had some exposure to Ruby but who want to know how to test their applications using Capybara and its compatible drivers, such as Selenium-Webdriver and Rack-Test. The examples are deliberately kept simple and example HTML mark-up is always included so that you can copy the examples to practice and experiment on your own machine.

  10. Best Sale Mobile Application

    OpenAIRE

    Chittugnanamoorthy, Balakumar

    2014-01-01

    The aim of this thesis was to find a best way to advertise short-term sales and reduce paper waste. Another aim was to help the seller to identify a potential customer for a specific product, by means of providing a number of people accessing an advertisement. A mobile phone is one of the widely used electronic devices by many people. Modern mobile phones support a good internet connection. Also, people carry their mobile devices with them even outside their homes. So a mobile application ...

  11. Nonextensive entropy interdisciplinary applications

    CERN Document Server

    Tsallis, Constantino

    2004-01-01

    A great variety of complex phenomena in many scientific fields exhibit power-law behavior, reflecting a hierarchical or fractal structure. Many of these phenomena seem to be susceptible to description using approaches drawn from thermodynamics or statistical mechanics, particularly approaches involving the maximization of entropy and of Boltzmann-Gibbs statistical mechanics and standard laws in a natural way. The book addresses the interdisciplinary applications of these ideas, and also on various phenomena that could possibly be quantitatively describable in terms of these ideas.

  12. Optimization Foundations and Applications

    CERN Document Server

    Miller, H Ronald

    2011-01-01

    A thorough and highly accessible resource for analysts in a broad range of social sciences. Optimization: Foundations and Applications presents a series of approaches to the challenges faced by analysts who must find the best way to accomplish particular objectives, usually with the added complication of constraints on the available choices. Award-winning educator Ronald E. Miller provides detailed coverage of both classical, calculus-based approaches and newer, computer-based iterative methods. Dr. Miller lays a solid foundation for both linear and nonlinear models and quickly moves on to dis

  13. Photocathodes in accelerator applications

    International Nuclear Information System (INIS)

    Fraser, J.S.; Sheffield, R.L.; Gray, E.R.; Giles, P.M.; Springer, R.W.; Loebs, V.A.

    1987-01-01

    Some electron accelerator applications require bursts of short pulses at high microscopic repetition rates and high peak brightness. A photocathode, illuminated by a mode-locked laser, is well suited to filling this need. The intrinsic brightness of a photoemitter beam is high; experiments are under way at Los Alamos to study the brightness of short bunches with high space charge after acceleration. A laser-illuminated Cs 3 Sb photoemitter is located in the first rf cavity of an injector linac. Diagnostics include a pepper-pot emittance analyzer, a magnetic spectrometer, and a streak camera

  14. Android Studio application development

    CERN Document Server

    Zapata, Belén Cruz

    2013-01-01

    A practical guide, which will show you how to create Android applications using the new Google official IDE, Android Studio.If you are a developer who wants to learn the key features of Android Studio, and learn how to create their first app, this book is ideal for you! Developers interested in this book should be familiar with the object- oriented programming paradigm, and the Java programming language. It is also recommended that you understand the main characteristics of the Android mobile system.

  15. Ultracapacitors for automotive applications

    Energy Technology Data Exchange (ETDEWEB)

    Ashtiani, Cyrus [DaimlerChrysler Corp., CIMS 526-00-00, 1870 Technology Dr., Troy, MI 48083 (United States); Wright, Randy; Hunt, Gary [Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 834415-3830 (United States)

    2006-03-21

    In response to a growing consensus in the auto industry that ultracapacitors can potentially play a key role in the modern vehicle power distribution network, a task force was created at the United States Advanced Battery Consortium (USABC) to tackle issues facing the fledging industry. The task force embarked on first developing and establishing standards for performance and abuse tolerance of ultracapacitors in collaboration with the U.S. Department of Energy and National Labs. Subsequently, potential applications in the automotive industry were identified and a consensus requirement specification was drawn as a development guide for the industry. (author)

  16. Unix Application Migration Guide

    CERN Document Server

    Microsoft. Redmond

    2003-01-01

    Drawing on the experience of Microsoft consultants working in the field, as well as external organizations that have migrated from UNIX to Microsoft® Windows®, this guide offers practical, prescriptive guidance on the issues you are likely to face when porting existing UNIX applications to the Windows operating system environment. Senior IT decision makers, network managers, and operations managers will get real-world guidance and best practices on planning and implementation issues to understand the different methods through which migration or co-existence can be accomplished. Also detailing

  17. Applicability of vulnerability maps

    International Nuclear Information System (INIS)

    Andersen, L.J.; Gosk, E.

    1989-01-01

    A number of aspects to vulnerability maps are discussed: the vulnerability concept, mapping purposes, possible users, and applicability of vulnerability maps. Problems associated with general-type vulnerability mapping, including large-scale maps, universal pollutant, and universal pollution scenario are also discussed. An alternative approach to vulnerability assessment - specific vulnerability mapping for limited areas, specific pollutant, and predefined pollution scenario - is suggested. A simplification of the vulnerability concept is proposed in order to make vulnerability mapping more objective and by this means more comparable. An extension of the vulnerability concept to the rest of the hydrogeological cycle (lakes, rivers, and the sea) is proposed. Some recommendations regarding future activities are given

  18. Gasdynamics: theory and applications

    International Nuclear Information System (INIS)

    Emanuel, G.

    1986-01-01

    The fundamental principles and applications of gasdynamic theory are presented in an introductory textbook intended for senior and graduate engineering students. The emphasis is on supersonic inviscid adiabatic flows with negligible body forces, and the approach aims to bridge the gap between traditional gasdynamics and CFD. Topics examined include thermodynamics, one-dimensional conservation equations, steady streamtube flows, normal and oblique shock waves, nozzle and diffuser flows, exact solutions for the steady homentropic flow of a perfect gas, and waverider aerodynamics. A glossary of symbols, summaries of the equations for each aspect of the theory, and fully worked problems for each chapter are provided. 82 references

  19. Materials for Photovoltaic Applications

    Science.gov (United States)

    Dimova-Malinovska, Doriana

    Energy priorities are changing nowadays. As mankind will probably have to face energy crisis, factors such as energy independence, energy security, stability of energy supply and the variety of energy sources become much more vital these days. Photovoltaics is exceptional compared to other renewable sources of energy due to its wide opportunity to gain energetic and environmental benefits. An overview of the present state of knowledge of the materials aspects of photovoltaic cells will be given, and new semiconductor materials, including nanomaterials, with potential for application in photovoltaic devices will be identified.

  20. Industrial applications of radiations

    International Nuclear Information System (INIS)

    Gallien, C.L.

    1988-01-01

    Radiation processing refers to the use of ionizing radiation to initiate chemical or biological changes in various materials as a substitute for conventional thermal or chemical processes. The method was inroduced in the industrial field 30 years ago and is now being widely used for numerous applications, among which industrial radiography, polymer modification, sterilization or decontamination, and food preservation. Both electron beam accelerators and gamma sources can be used, depending mainly of the amount of radiation and the penetration required. Radiation processing presents an increasing economical importance; in 1986 the market volume of ionized products ranged 3 billion $ [fr