WorldWideScience

Sample records for som laboratory prototype

  1. Rapid Prototyping Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The ARDEC Rapid Prototyping (RP) Laboratory was established in December 1992 to provide low cost RP capabilities to the ARDEC engineering community. The Stratasys,...

  2. Light Guide Collector Prototype: Laboratory Testing

    OpenAIRE

    Jitka - Mohelnikova; Stanislav Darula; Ayodeji Omishore; Petr Mohelnik; Denis Micek

    2017-01-01

    The article reviews the potential of light guide system equipped by a concentrator device capturing daylight applicable for illumination of building interiors and presents results of experiments on performance of its prototype. The main goal is focused on the comparison of traditional solutions and newly developed prototype of the light guide system and presents examination of its light transmission efficiency based on the laboratory experiments.

  3. Light Guide Collector Prototype: Laboratory Testing

    Directory of Open Access Journals (Sweden)

    Jitka - Mohelnikova

    2017-12-01

    Full Text Available The article reviews the potential of light guide system equipped by a concentrator device capturing daylight applicable for illumination of building interiors and presents results of experiments on performance of its prototype. The main goal is focused on the comparison of traditional solutions and newly developed prototype of the light guide system and presents examination of its light transmission efficiency based on the laboratory experiments.

  4. The PIAA Coronagraph Prototype: First Laboratory Results.

    Science.gov (United States)

    Pluzhnik, Eugene; Guyon, O.; Colley, S.; Gallet, B.; Ridgway, S.; Woodruff, R.; Tanaka, S.; Warren, M.

    2006-12-01

    The phase-induced amplitude apodization (PIAA) coronagraph combines the main advantages of classical pupil apodization with high throughput ( 100%), high angular resolution ( 2λ/D) and low chromaticity. These advantages can allow direct imaging of nearby extrasolar planets with a 4-meter telescope. The PIAA coronagraph laboratory prototype has been successfully manufactured and starts to operate at the Subary Telescope facility. We present here our first laboratory results with this prototype where we have achieved 2x10-6 contrast within 2 λ/D. We also discuss the main constrains limiting the contrast and describe our future efforts. This work was carried out under JPL contract numbers 1254445 and 1257767 for Development of Technologies for the Terrestrial Planet Finder Mission, with the support and hospitality of the National Astronomical Observatory of Japan.

  5. Evaluation of Strontium Selectivity by Sandia Octahedral Molecular Sieves (SOMS).

    Energy Technology Data Exchange (ETDEWEB)

    Rigali, Mark J.; Stewart, Thomas Austin

    2016-01-01

    Sandia National Laboratories has collaborated with Pleasanton Ridge Research Company (PRRC) to determine whether Sandia Octahedral Molecular Sieves (SOMS) and modified SOMs materials can be synthesized in large batches and produced in granular form. Sandia National Laboratories tested these SOMS and its variants based in aqueous chemical environments for an application-based evaluation of material performance as a sorbent. Testing focused primarily on determining the distribution coefficients (K d ) and chemical selectivity SOMs for alkali earth (Sr) ions in aqueous and dilute seawater solutions. In general the well-crystallized SOMS materials tested exhibited very high K d values (>10 6 ) in distilled water but K d values dropped substantially (%7E10 2 -10 3 ) in the dilute seawater (3%). However, one set of SOMS samples (1.4.2 and 1.4.6) provided by PRRC yielded relatively high K d (approaching 10 4 ) in dilute seawater. Further examination of these samples by scanning electron microscopy (SEM) revealed the presence of at least two phases at least one of which may be accounting for the improved K d values in dilute seawater. Evaluation of Strontium Selectivity by Sandia Octahedral Molecular Sieves (SOMS) January 20, 2016

  6. Prototype_Matematikforløb_Sct-Hans

    DEFF Research Database (Denmark)

    Davidsen, Helle Munkholm; Sørensen, Kirsten Bonde; Klitø, Nanna Breinholt

    2015-01-01

    Forløbet udgør en prototype på et matematikforløb til 8. klasse, som er udviklet til at styrke og fastholde elevers motivation for læring. Formålet med denne prototype er at styrke motivationen for læring gennem synlige læringsmål, faglig differentiering og elevernes medbestemmelse. Didaktisk mål...

  7. Prototype_Danskforløb_Sct.Hans

    DEFF Research Database (Denmark)

    Davidsen, Helle Munkholm; Sørensen, Kirsten Bonde; Klitø, Nanna Breinholt

    2015-01-01

    Forløbet udgør en prototype på et danskforløb til 4. klasse, som er udviklet til at styrke og fastholde elevers motivation for læring. Formålet med denne prototype er at styrke motivationen for læring gennem synlige læringsmål, faglig differentiering og elevernes medbestemmelse. Didaktisk mål: at...

  8. On the Relationship between Variational Level Set-Based and SOM-Based Active Contours

    Science.gov (United States)

    Abdelsamea, Mohammed M.; Gnecco, Giorgio; Gaber, Mohamed Medhat; Elyan, Eyad

    2015-01-01

    Most Active Contour Models (ACMs) deal with the image segmentation problem as a functional optimization problem, as they work on dividing an image into several regions by optimizing a suitable functional. Among ACMs, variational level set methods have been used to build an active contour with the aim of modeling arbitrarily complex shapes. Moreover, they can handle also topological changes of the contours. Self-Organizing Maps (SOMs) have attracted the attention of many computer vision scientists, particularly in modeling an active contour based on the idea of utilizing the prototypes (weights) of a SOM to control the evolution of the contour. SOM-based models have been proposed in general with the aim of exploiting the specific ability of SOMs to learn the edge-map information via their topology preservation property and overcoming some drawbacks of other ACMs, such as trapping into local minima of the image energy functional to be minimized in such models. In this survey, we illustrate the main concepts of variational level set-based ACMs, SOM-based ACMs, and their relationship and review in a comprehensive fashion the development of their state-of-the-art models from a machine learning perspective, with a focus on their strengths and weaknesses. PMID:25960736

  9. Evaluering som kvalitetsstøtte og mål som guide

    DEFF Research Database (Denmark)

    Levinsen, Karin Tweddell; Sørensen, Birgitte Holm

    2017-01-01

    Dette kapitel omhandler sammenhængen mellem det didaktiske design og evalueringspraksisser som aktivite der understøtter elevernes læring både som proces og produkt. Først gøres der rede for de anvendte begreber, og der argumenteres for, at formative og summative evalueringer kan forstås som...

  10. Studerende som co-creators

    DEFF Research Database (Denmark)

    Andersen, Line Palle

    En kogebog blev udviklet med studerende som co-creators på 3 moduler om innovation, skriftlig kommunikation og praktik med redigering. Healeys model om student-partnerships blev anvendt som fundament......En kogebog blev udviklet med studerende som co-creators på 3 moduler om innovation, skriftlig kommunikation og praktik med redigering. Healeys model om student-partnerships blev anvendt som fundament...

  11. Mobning som socialt begreb

    DEFF Research Database (Denmark)

    Schott, Robin May

    2009-01-01

    Artiklen analyserer mobning i skolen som et socialt fænomen snarere end som en relation mellem individuelle mobbere og deres ofre. Denne tilgang afspejler nyere forskning, der har fokuseret på mobningens sociale dynamik, og står derved i modsætning til den individualistisk tilgang, der ellers har...... domineret feltet. Jeg undersøger tre definition af mobning: 1) mobning som en form for individuel aggression, 2) mobning som en slags samfundsmæssig vold og 3) mobning som en form for dysfunktionel gruppedynamik og kommer med et forslag til en ny definition....

  12. Subsurface oxidation for micropatterning silicon (SOMS).

    Science.gov (United States)

    Zhang, Feng; Sautter, Ken; Davis, Robert C; Linford, Matthew R

    2009-02-03

    Here we present a straightforward patterning technique for silicon: subsurface oxidation for micropatterning silicon (SOMS). In this method, a stencil mask is placed above a silicon surface. Radio-frequency plasma oxidation of the substrate creates a pattern of thicker oxide in the exposed regions. Etching with HF or KOH produces very shallow or much higher aspect ratio features on silicon, respectively, where patterning is confirmed by atomic force microscopy, scanning electron microscopy, and optical microscopy. The oxidation process itself is studied under a variety of reaction conditions, including higher and lower oxygen pressures (2 and 0.5 Torr), a variety of powers (50-400 W), different times and as a function of reagent purity (99.5 or 99.994% oxygen). SOMS can be easily executed in any normal chemistry laboratory with a plasma generator. Because of its simplicity, it may have industrial viability.

  13. Leg som ustyrlig deltagelseskultur

    DEFF Research Database (Denmark)

    Toft, Herdis

    2017-01-01

    - og spilteoretikere Johan Huizinga og Roger Caillois. Deres teorier og begrebsdannelser har været brugt til at påpege leg dels som et æstetisk baseret betydningssystem, dels som et affektivt og stemningsbaseret oplevelsessystem samt endelig som et socialt baseret relationssystem. I artiklen vælger vi...... at fokusere på leg som et socialt baseret relationssystem og yderligere zoome ind på et af legens systemiske væsenstræk, nemlig brugen af regulerbare regelsæt, som legerne uden ’politi’ forhandler sig frem til før, under og efter legen. Fælles for Huizinga og Caillois er, at de knytter leg uløseligt sammen...

  14. Proto-2, an ALICE detector prototype, part of the STAR experiment at the Brookhaven National Laboratory

    CERN Multimedia

    2002-01-01

    Proto-2, an LAICE detector prototype, overcame its prototype status to become a real part of the SDTAR, epxeriment at the US Brookhaven National Laboratory. After more than two years across the ocean, it has just arrived back at CERN.

  15. Laboratory test of an APS-based sun sensor prototype

    Science.gov (United States)

    Rufino, Giancarlo; Perrotta, Alessandro; Grassi, Michele

    2017-11-01

    This paper deals with design and prototype development of an Active Pixel Sensor - based miniature sun sensor and a laboratory facility for its indoor test and calibration. The miniature sun sensor is described and the laboratory test facility is presented in detail. The major focus of the paper is on tests and calibration of the sensor. Two different calibration functions have been adopted. They are based, respectively, on a geometrical model, which has required least-squares optimisation of system physical parameters estimates, and on neural networks. Calibration results are presented for the above solutions, showing that accuracy in the order of 0.01° has been achieved. Neural calibration functions have attained better performance thanks to their intrinsic auto-adaptive structure.

  16. Musik som analogi og metafor

    DEFF Research Database (Denmark)

    Bonde, Lars Ole

    2014-01-01

    Indeholder underkapitlerne: 2.5.1 Musik som analogi 2.5.2 Musik som metafor 2.5.3 Musikkens psykologiske funktioner - en taxonomi og metaforisk lytning til fire baroksatser......Indeholder underkapitlerne: 2.5.1 Musik som analogi 2.5.2 Musik som metafor 2.5.3 Musikkens psykologiske funktioner - en taxonomi og metaforisk lytning til fire baroksatser...

  17. Kulturen som krænkelsens virkelighed

    DEFF Research Database (Denmark)

    Brock, Steen

    2006-01-01

    En analyse af forholdet mellem natur og kultur i relation til en opfattelse af kultur, som har sin oprindelse i Cicero, og som har sin genklang i moderne tænkere som Goethe, Wittgenstein, Cavell og E. Wolfgang Orth.......En analyse af forholdet mellem natur og kultur i relation til en opfattelse af kultur, som har sin oprindelse i Cicero, og som har sin genklang i moderne tænkere som Goethe, Wittgenstein, Cavell og E. Wolfgang Orth....

  18. Boken som medium

    OpenAIRE

    Pelle, Snickars

    2012-01-01

    I slutet av september 2011 presenterade Amazon ett ny slags surfplatta, Kindle Fire. Till skillnad från företagets tidigare läsplattor, som (nästan) enbart handlat om läsning på skärm, var detta en Kindle som behärskade hela det samtidsmediala spektrat. Under ledning av Amazons VD Jeff Bezos var själva lanseringen av Kindle Fire visserligen en ganska platt historia. Bezos är ingen estradör och en föga karismatisk företagsledare med än mindre publikreaktioner gör inte någon succé – eller som e...

  19. Gipskroppe som performance

    DEFF Research Database (Denmark)

    Holm, Henrik

    2010-01-01

    Analyse af den Kgl. Afstøbningssamlings nøgne gipsfigurer og samlingens nedtur igennem historien, med Judith Butler og andres performativitetsteorietiske begrebsapparat som metode.......Analyse af den Kgl. Afstøbningssamlings nøgne gipsfigurer og samlingens nedtur igennem historien, med Judith Butler og andres performativitetsteorietiske begrebsapparat som metode....

  20. Supervision som undervisningsform i voksenspecialundervisningen

    DEFF Research Database (Denmark)

    Kristensen, René

    2000-01-01

    Supervision som undervisningsform i voksenspecialundervisningen. Procesarbejde i undervisning af voksne.......Supervision som undervisningsform i voksenspecialundervisningen. Procesarbejde i undervisning af voksne....

  1. Soil organic matter (SOM) dynamics determined by stable isotope techniques

    International Nuclear Information System (INIS)

    Gerzabek, M. H.

    1998-09-01

    Being aware of limitations and possible bias the 13 C natural abundance technique using the different 13 C enrichments in plants with differing photosynthetic pathways in a powerful tool to quantify turnover processes, both in long-term field studies and short-term laboratory experiments. Special care is needed in choosing reference plots and the proper number of replicate samples. The combination of 13 C and 14 C measurements has a high potential for a further improvement of isotope techniques in SOM studies. Natural abundance of 15 N is less powerful with respect to quantification of SOM processes than the isotope dilution technique. However its usefulness could be distinctly improved by introducing other stable isotopes into the studies.(author)

  2. Komponist som kirkefader?

    DEFF Research Database (Denmark)

    Petersen, Nils Holger

    2016-01-01

    En diskussion primært af Karl Barths anvendelse Mozart in sin Kirchliche Dogmatik under læren om "das Nichtige", som en slags løsning på theodicé-problemet.......En diskussion primært af Karl Barths anvendelse Mozart in sin Kirchliche Dogmatik under læren om "das Nichtige", som en slags løsning på theodicé-problemet....

  3. Forskere som nano-arkitekter

    DEFF Research Database (Denmark)

    Nielsen, Morten Muhlig; Andersen, Ebbe Sloth

    2009-01-01

    Dna er et fantastisk byggemateriale, som ud fra enkle principper kan samle sig selv til umådeligt komplicerede strukturer. Forskerne udnytter nu disse egenskaber til at lave deres egne, hjemmedesignede dna-strukturer, som kan tænkes anvendt i mange forskellige sammenhænge. Udgivelsesdato: juli...

  4. Intelligent design som videnskab?

    DEFF Research Database (Denmark)

    Klausen, Søren Harnow

    2007-01-01

    Diskuterer hvorvidt intelligent design kan betegnes som videnskab; argumenterer for at dette grundet fraværet af klare demarkationskriterier næppe kan afvises.......Diskuterer hvorvidt intelligent design kan betegnes som videnskab; argumenterer for at dette grundet fraværet af klare demarkationskriterier næppe kan afvises....

  5. Selected laboratory evaluations of the whole-water sample-splitting capabilities of a prototype fourteen-liter Teflon churn splitter

    Science.gov (United States)

    Horowitz, A.J.; Smith, J.J.; Elrick, K.A.

    2001-01-01

    A prototype 14-L Teflon? churn splitter was evaluated for whole-water sample-splitting capabilities over a range of sediment concentratons and grain sizes as well as for potential chemical contamination from both organic and inorganic constituents. These evaluations represent a 'best-case' scenario because they were performed in the controlled environment of a laboratory, and used monomineralic silica sand slurries of known concentration made up in deionized water. Further, all splitting was performed by a single operator, and all the requisite concentration analyses were performed by a single laboratory. The prototype Teflon? churn splitter did not appear to supply significant concentrations of either organic or inorganic contaminants at current U.S. Geological Survey (USGS) National Water Quality Laboratory detection and reporting limits when test samples were prepared using current USGS protocols. As with the polyethylene equivalent of the prototype Teflon? churn, the maximum usable whole-water suspended sediment concentration for the prototype churn appears to lie between 1,000 and 10,000 milligrams per liter (mg/L). Further, the maximum grain-size limit appears to lie between 125- and 250-microns (m). Tests to determine the efficacy of the valve baffle indicate that it must be retained to facilitate representative whole-water subsampling.

  6. Yoga som terapeutisk aktivitet

    DEFF Research Database (Denmark)

    Broge, Julie Wolf

    2014-01-01

    Artiklen præsenterer yoga som terapeutisk aktivitet til børn og unge med særlige behov. Den gavnlige virkning af yoga uddybes.......Artiklen præsenterer yoga som terapeutisk aktivitet til børn og unge med særlige behov. Den gavnlige virkning af yoga uddybes....

  7. Test-beam and laboratory characterisation of the TORCH prototype detector

    CERN Document Server

    Ros, A; Castillo-Garcia, L; Conneely, T; Cussans, D; Foehl, K; Forty, R; Frei, C; Gao, R; Gys, T; Harnew, N; Milnes, J; Piedigrossi, D; Rademacker, J; Van Dijk, M

    2017-01-01

    The TORCH time-of-flight (TOF) detector is being developed to provide particle identification up to a momentum of 10 GeV/c over a flight distance of 10 m. It has a DIRC-like construction with View the MathML source10mm thick synthetic amorphous fused-silica plates as a Cherenkov radiator. Photons propagate by total internal reflection to the plate periphery where they are focused onto an array of customised position-sensitive micro-channel plate (MCP) detectors. The goal is to achieve a 15 ps time-of-flight resolution per incident particle by combining arrival times from multiple photons. The MCPs have pixels of effective size 0.4 mm×6.6 mm2 in the vertical and horizontal directions, respectively, by incorporating a novel charge-sharing technique to improve the spatial resolution to better than the pitch of the readout anodes. Prototype photon detectors and readout electronics have been tested and calibrated in the laboratory. Preliminary results from testbeam measurements of a prototype TORCH detector are a...

  8. Auto-fotografi som metode

    DEFF Research Database (Denmark)

    Mogensen, Mette

    2014-01-01

    Artiklen sætter fokus på auto-fotografi som metode i arbejdsmiljøforskningen. Den organisationsæstetiske tilgang, som metoden ofte forbindes med, udfordres med afsæt i en performativ og aktørnetværks-teoretisk position. Gennem en analyse af et enkelt auto-fotografi vises hvordan en artikulation af...

  9. Værk som handling

    DEFF Research Database (Denmark)

    Jalving, Camilla

    , er det stadig kun ved at blive en del af kunsthistoriens metode. Bogen afdækker derfor først begrebets skiftende betydninger fra J.L. Austins sprogfilosofi til Judith Butlers kønsteori og afprøver derefter, hvordan det kan bruges som metode i kunsthistorien og spores som tema i billedkunsten. Det...

  10. Statistikeren skiftede spor som 49-årig

    DEFF Research Database (Denmark)

    Sølund, Sune; Rootzén, Helle

    2010-01-01

    En uddannelse til coach har ændret Helle Rototzens liv. Som 49-årig forlod hun et forskerliv på deltid til fordel for en karriere som DTU's eneste kvindelige institutdirektør.......En uddannelse til coach har ændret Helle Rototzens liv. Som 49-årig forlod hun et forskerliv på deltid til fordel for en karriere som DTU's eneste kvindelige institutdirektør....

  11. Interaktionsforskning som metode i erhvervsforskningen

    DEFF Research Database (Denmark)

    Goldschmidt, Lars; Elkjær-Larsen, Jens Kr.

    aktionsforskningen er ikke konsolideret som én fælles forskningstradition. Der er derimod udviklet en række forskningsmetodiske tilgange såsom: Aktionsforskning, Action science,Sociologisk fantasi, Bruger/borger involvering i udviklingsprojekter, Dialogforskning, Reflectivepractice, Action learning, Appreciative...... inquiry, Communities of Inquiry in Communities ofpractice, Clinical inquiry (Baskerville 1996). Metoderne er udviklet i relation til det felt eller problemstilling, som forskergrupperne var engagerede i, og kun enkelte er tænkt ind i enerhvervsforskningskontekst. Denne mangfoldighed har ført til, at det...

  12. Straf som penibel ledelsesform

    DEFF Research Database (Denmark)

    Knudsen, Hanne; Bjerg, Helle

    2014-01-01

    Kan klasseledelse fungere uden muligheden for at straffe? Kan man have en skole uden straf? Hvis man ser tilbage på skolens historie, ser svaret ud til at være nej. Skolen som institution ser ud til at være uløseligt forbundet med disciplinering af eleverne til at gøre noget, som de ikke nødvendi...

  13. Inter-laboratory assessment of a prototype multiplex kit for determination of recent HIV-1 infection.

    Directory of Open Access Journals (Sweden)

    Kelly A Curtis

    Full Text Available BACKGROUND: Accurate and reliable laboratory-based assays are needed for estimating HIV-1 incidence from cross-sectional samples. We recently described the development of a customized, HIV-1-specific Bio-Plex assay that allows for the measurement of HIV-specific antibody levels and avidity to multiple analytes for improved HIV-1 incidence estimates. METHODS: To assess intra- and inter-laboratory assay performance, prototype multiplex kits were developed and evaluated by three distinct laboratories. Longitudinal seroconversion specimens were tested in parallel by each laboratory and kit performance was compared to that of an in-house assay. Additionally, the ability of the kit to distinguish recent from long-term HIV-1 infection, as compared to the in-house assay, was determined by comparing the reactivity of known recent (infected 12 months drug naïve specimens. RESULTS: Although the range of reactivity for each analyte varied between the prototype kit and in-house assay, a measurable distinction in reactivity between recent and long-term specimens was observed with both assays in all three laboratories. Additionally, kit performance was consistent between all three laboratories. The intra-assay coefficient of variation (CV, between sample replicates for all laboratories, ranged from 0.5% to 6.1%. The inter-laboratory CVs ranged from 8.5% to 21.3% for gp160-avidity index (a and gp120-normalized mean fluorescent intensity (MFI value (n, respectively. CONCLUSION: We demonstrate the feasibility of producing a multiplex kit for measuring HIV antibody levels and avidity, with the potential for improved incidence estimates based on multi-analyte algorithms. The availability of a commercial kit will facilitate the transfer of technology among diverse laboratories for widespread assay use.

  14. Lannister som statsminister

    DEFF Research Database (Denmark)

    Konzack, Lars

    2014-01-01

    Der er fuld skrue på intriger, sex og død i Game of Thrones. Det er stærkt underholdende og kan også ses som et billede på de moderne politiske spil. Hvem er seriens Putin? Og hvilken politisk leder ligner Prins Joffrey?......Der er fuld skrue på intriger, sex og død i Game of Thrones. Det er stærkt underholdende og kan også ses som et billede på de moderne politiske spil. Hvem er seriens Putin? Og hvilken politisk leder ligner Prins Joffrey?...

  15. Diagnoser som styringshybrider

    DEFF Research Database (Denmark)

    Bossen, Claus; Danholt, Peter; Ubbesen, Morten Bonde

    2016-01-01

    - Relaterede Grupper (DRG). DRG er et internationalt udbredt system til at knytte patienter og deres behandlingsomkostninger sammen i faste kategorier med henblik på at måle hospitalers produktivitet. Med afsæt i Science-Technology-Studies (STS)-feltet analyserer artiklen, hvorledes diagnoser overskrider deres......, hvordan DRG-systemet alternativt kan anskues som en samfundsudviklende infrastruktur, idet det forsamler og skaber gensidigt involverende interaktioner imellem politiske, administrative og sundhedsprofessionelle domæner. En sådan indsigt bidrager til en udvidet forståelse af infrastrukturers roller som...

  16. Filosofisk terapi som social atilpasning

    DEFF Research Database (Denmark)

    Sørensen, Anders Dræby

    Den dominerende psykopatologi forstår psykiske lidelser som udtryk for en patologisk utilpassethed, og psykoterapiens mål bliver normalisering gennem social og psykisk gentilpasning. Eksistentiel fænomenologi forstår lidelsen som etisk vildfarelse i det normale, og terapiens knytter an begreber o...

  17. Interval Analysis Approach to Prototype the Robust Control of the Laboratory Overhead Crane

    Science.gov (United States)

    Smoczek, J.; Szpytko, J.; Hyla, P.

    2014-07-01

    The paper describes the software-hardware equipment and control-measurement solutions elaborated to prototype the laboratory scaled overhead crane control system. The novelty approach to crane dynamic system modelling and fuzzy robust control scheme design is presented. The iterative procedure for designing a fuzzy scheduling control scheme is developed based on the interval analysis of discrete-time closed-loop system characteristic polynomial coefficients in the presence of rope length and mass of a payload variation to select the minimum set of operating points corresponding to the midpoints of membership functions at which the linear controllers are determined through desired poles assignment. The experimental results obtained on the laboratory stand are presented.

  18. Interval Analysis Approach to Prototype the Robust Control of the Laboratory Overhead Crane

    International Nuclear Information System (INIS)

    Smoczek, J; Szpytko, J; Hyla, P

    2014-01-01

    The paper describes the software-hardware equipment and control-measurement solutions elaborated to prototype the laboratory scaled overhead crane control system. The novelty approach to crane dynamic system modelling and fuzzy robust control scheme design is presented. The iterative procedure for designing a fuzzy scheduling control scheme is developed based on the interval analysis of discrete-time closed-loop system characteristic polynomial coefficients in the presence of rope length and mass of a payload variation to select the minimum set of operating points corresponding to the midpoints of membership functions at which the linear controllers are determined through desired poles assignment. The experimental results obtained on the laboratory stand are presented

  19. Fantasy som religion

    DEFF Research Database (Denmark)

    Davidsen, Markus

    2010-01-01

    Artiklen redegør for George Lucas' religionspædagogiske projekt med Star Wars og jediismens brug af Star Wars som religiøs tekst i en fantasybaseret religion. Afslutningsvist gives en række forslag til hvordan man kan anvende Star Wars og jediismen i folkeskolens religionsundervisning.......Artiklen redegør for George Lucas' religionspædagogiske projekt med Star Wars og jediismens brug af Star Wars som religiøs tekst i en fantasybaseret religion. Afslutningsvist gives en række forslag til hvordan man kan anvende Star Wars og jediismen i folkeskolens religionsundervisning....

  20. Kollektivet som korrektiv

    DEFF Research Database (Denmark)

    Krøjer, Jo; Hutters, Camilla

    2008-01-01

    I Danmark har de unge individuel valgfrihed, når det kommer til valget af videregående uddannelse. Der er ikke nogen uddannelsespligt - valget er op til den unge. Den etablerede uddannelsesvejledning initierer et selvarbejde, hvorunder de unge anspores til at arbejde individuelt med at træffe det...... rette uddannelsesvalg. De unge oplever uddannelsesvalget som et ensomt og belastende arbejde. Så hvad sker der, når unge kollektivt reflekterer over at skulle vælge uddannelse? Artiklen præsenterer fortælleværksteder som metode til kollektive korrektioner af neoliberal regulering....

  1. Fokusgruppeinterview som led i en evalueringsproces

    DEFF Research Database (Denmark)

    Andersen-Mølgaard, Hanna; Harrit, Ole

    2006-01-01

    Teoretiske begrundelser og perspektiver, responsiv-konstruktivistisk evaluering, fokusgruppeinterview som led i BIKVAmodellen, eksempler, vurdering og perspektivering......Teoretiske begrundelser og perspektiver, responsiv-konstruktivistisk evaluering, fokusgruppeinterview som led i BIKVAmodellen, eksempler, vurdering og perspektivering...

  2. Ulikhet som impuls for nye oppdagelser i dans: Å tøye både muskler og meninger gjennom mangfold i Danselaboratoriet

    Directory of Open Access Journals (Sweden)

    Tone Pernille Østern

    2014-12-01

    Full Text Available I denne artikkelen har forfatterne fokus på hvordan ulikhet mellom mennesker kan fungere som en impuls som bidrar til meningsskaping, nye oppdagelser og transformasjon i improvisasjon i dans. Artikkelen tar utgangspunkt i Østerns avhandling ”Meaning-making in the Dance Laboratory. Exploring dance improvisation with differently bodied dancers” (2009. I artikkelen vever forfatterne sammen sine ulike stemmer. Tone Pernille Østerns perspektiv er som initiativtaker og tidligere koreograf-dansepedagog i Danselaboratoriet, mens Elen Øyens perspektiv er som danser i den samme gruppen. Øyen er danser og rullestolbruker. Hovedkonklusjonen i artikkelen er at gjennom å forstå ulikhet som en verdi og impuls til å møtes og skape i improvisasjon i dans, så kan deltakerne i gruppen gjennomgå kraftfulle transformative endringsprosesser når det gjelder synet på ”den andre”. Dette har en betydning som går langt ut over det konkrete, kunstneriske undervisningsrommet. ”Den andre” forstås i artikkelen som en konstruksjon som både muliggjør adskillelse og utestenging fra et fellesskap, men også som en mulighet til å forstå at ”den andre” ikke nødvendigvis er, eller skal være, som meg.

  3. Kakkelovnen som arkiv

    DEFF Research Database (Denmark)

    Duedahl, Poul

    2005-01-01

    "Folk gjorde såmænd klogt i at gøre som jeg - jeg bruger kakkelovnen som arkiv" gentog tidligere konseilspræsident J.C. Christensen (1856-1930) ofte over for venner og bekendte. Selv destruerede han de fleste af sine breve, mens han var i live, og i mange år troede man, at hans dagbøger blev bræn...... anledning til nogle refleksioner over, hvad man skal stille op med dem; hvad det er, der får folk til at skrive dagbøger og hvad det er, der får folk til at skille sig af med dem igen....

  4. "Hvem er som jeg blandt Guder?"

    DEFF Research Database (Denmark)

    Holst, Søren

    2004-01-01

    En hymne fra Dødehavsrullerne beskriver en persons opstigning til himlen, hvor den pågældende får tildelt overmenneskelig indsigt, som giver ham autoritet til at belære sine tilhængere på jorden. Hymnen analyseres, og der foretages en kritisk gennemgang af Israel Knohls bog "The Messiah Before Je...... Jesus", som hævder at teksten skulle handle om et medlem af Qumran-menigheden, som blev dræbt i Jerusalem og senere hævdedes at være opstået fra de døde....

  5. An Embedded Systems Laboratory to Support Rapid Prototyping of Robotics and the Internet of Things

    Science.gov (United States)

    Hamblen, J. O.; van Bekkum, G. M. E.

    2013-01-01

    This paper describes a new approach for a course and laboratory designed to allow students to develop low-cost prototypes of robotic and other embedded devices that feature Internet connectivity, I/O, networking, a real-time operating system (RTOS), and object-oriented C/C++. The application programming interface (API) libraries provided permit…

  6. Byen som bevægelsesgrund?

    DEFF Research Database (Denmark)

    Højbjerre Larsen, Signe

    2013-01-01

    Parkour er en bevægelseskultur der ikke udfolder sig i afgrænsede rum eller på bestemte tidspunkter. Den er i stedet betinget af at byens rum anvendes som bevægelsesgrund. Parkourudøvernes særegne brug af byrummet kalder på opmærksomhed og analytisk undren: Hvordan kan vi forstå et fænomen som pa...

  7. Gruppeeksamen som strategisk kommunikation

    DEFF Research Database (Denmark)

    Andersen, Tem Frank; Bang, Janne

    2014-01-01

    Artiklen har fokus på at skabe et grundlag for en teoretisk diskussion af gruppeeksamen som den bedste og mest egnede form for eksamen, når problembaseret læring er mål og middel i regi af Aalborg Universitet.......Artiklen har fokus på at skabe et grundlag for en teoretisk diskussion af gruppeeksamen som den bedste og mest egnede form for eksamen, når problembaseret læring er mål og middel i regi af Aalborg Universitet....

  8. Assembly and maintenance of full scale NIF amplifiers in the amplifier module prototype laboratory (AMPLAB)

    International Nuclear Information System (INIS)

    Horvath, J. A.

    1998-01-01

    Mechanical assembly and maintenance of the prototype National Ignition Facility amplifiers in the Amplifier Module Prototype Laboratory (AMPLAB) at Lawrence Livermore National Laboratory requires specialized equipment designed to manipulate large and delicate amplifier components in a safe and clean manner. Observations made during the operation of this assembly and maintenance equipment in AMPLAB provide design guidance for similar tools being built for the National Ignition Facility. Fixtures used for amplifier frame installation, laser slab and flashlamp cassette assembly, transport, and installation, and in-situ blastshield exchange are presented. Examples include a vacuum slab gripper, slab handling clean crane, slab cassette assembly fixture, sealed transport vehicle for slab cassette movement between the cleanroom and amplifier, slab cassette transfer fixture between the cleanroom and transport vehicle, and equipment needed for frame assembly unit, blastshield, an d flashlamp cassette installation and removal. The use of these tools for amplifier assembly, system reconfiguration, reflector replacement, and recovery from an abnormal occurrence such as a flashlamp explosion is described. Observations are made on the design and operation of these tools and their contribution to the final design

  9. Artikelskrivning som eksamensform

    Directory of Open Access Journals (Sweden)

    Lars Domino Østergaard

    2013-09-01

    Full Text Available I denne artikel vil vi diskutere, hvordan studerendes arbejde med udformning af en videnskabelig artikel som afsæt for summativ evaluering af undervisningsmoduler, kan bidrage såvel til de studerendes oplevelse af motivation som til oplevelse af, at de gives muligheder for at udvikle konkrete aka­demiske kompetencer. Vi tager udgangspunkt i en række teoretiske over­vejelser, der knytter den summative evaluering til begreber som autentiske rammer, kompetenceudvikling og motivation. Disse overvejelser supplerer vi med resultaterne af en konkret undersøgelse af et pilotforsøg gen­nem­ført ved 2. semester på kandidatuddannelsen i Idræt på Aalborg Uni­versitet. I relation til to kursusmoduler har de studerende udarbejdet en videnskabelig artikel med afsæt i indsamlet empiri. Undersøgelsen viser, at de studerende i altovervejende grad er positive over for artikelskrivning som udgangspunkt for deres evaluering. Undersøgelsen viser videre, at de studerende oplever en følelse af motivation ved bl.a. at arbejde med selv­valgte problemstillinger. Hvorvidt de studerende faktisk udviklede kom­­petencer i forløbet, som de ikke kunne udvikle ved andre evalueringsformer, er fortsat ikke afdækket men vil være et naturligt næste genstandsfelt for undersøgelse.     In this paper we discuss how setting students a scientific paper to write as part of their course module summative assessment may help motivate students and contribute to their academic competencies. We depart from theoretical considerations that connect summative evaluation to concepts of authentic frameworks, competence development and motivation, and instead argue that writing a scientific paper as part of evaluation may be both motivational to students and provide a framework for developing competencies. We supplement these observations by presenting the results from a study conducted in a 2nd semester master programme in sport science at Aalborg University, Denmark

  10. Introduktionslæger som vejledere - hvorfor?

    DEFF Research Database (Denmark)

    Skaarup, Anne Marie; Ringsted, Charlotte Vibeke

    2004-01-01

    Statusartiklen har til hensigt at beskrive det pædagogiske rationale for at anvende introduktionslæger som vejledere, holdningen blandt introduktionslæger og speciallæger til at bruge introduktionslæger som vejledere, og hvilke ulemper der kan identificeres, og hvordan de eventuelt kan overvindes...

  11. Tavs viden som led i vidensdiskursen

    DEFF Research Database (Denmark)

    Christensen, Jens

    2004-01-01

    Bidraget giver en  erkendelsesteoretisk tilgang til tavs viden som ressource i en teknologisk forandringsproces. Der tages udgangspunkt i, at tavs viden ikke kan betragtes uden at forholde sig til den mere generelle og historiske vidensdiskurs, som igen indgår i en kontekst af relationer mellem e...

  12. Sociale medier som læringsredskaber

    Directory of Open Access Journals (Sweden)

    Lill Ingstad

    2011-03-01

    Full Text Available Kan sociale medier anvendes som læringsredskaber til støtte for sociale, kollaborative processer, der er udfordrende og motiverende, og som samtidig understøtter (fremmedsprogstilegnelsen?Artiklen diskuterer eksempler på fagdidaktiske udfordringer i sprogundervisningen på CBS med fokus på engelsk.

  13. "Tryllefløjten" som musik-historisk allegori

    DEFF Research Database (Denmark)

    Jensen, Jørgen I.

    1991-01-01

    Musikhistorie, Mozarts "Tryllefløjten", Mozart som historisk fænomen, oplysningstid, frimureri, musik og religion......Musikhistorie, Mozarts "Tryllefløjten", Mozart som historisk fænomen, oplysningstid, frimureri, musik og religion...

  14. Tema 1: Robotdidaktik. Læringsrobotter som indhold i undervisningen.

    Directory of Open Access Journals (Sweden)

    Jens Jørgen Hansen

    2016-01-01

    Full Text Available Robotter er en teknologi som i disse år bevæger sig ind i skolen. Spørgsmålet er med hvilken didaktisk begrundelse og dermed læringsmæssig relevans man kan arbejde med robotter i skolen? Hvorfor skal eleverne beskæftige sig med robotter? Dette spørgsmål er en opgave for didaktikken at svare på, hvilket sætter robotdidaktik på didaktikkens landkort. I artiklen undersøges en række didaktiske designs fra projektet Fremtek,hvor lærere bl.a. har eksperimenteret med at udvikle undervisningsforløb med humanidrobotter – en slags læringsrobotter -­‐ som omdrejningspunkt (Majgaard 2014. Robotters funktion som indhold i disse didaktiske design analyseres ud fra Frede V. Nielsens fire indholdskategorier: indhold som fænomen, som realia og kontekst, som aktivitet og metode og som personligog social erfaringsfelt. Målet er at udvikle en kritisk og kreativ refleksion over og diskussion af robotteknologi som mål og middel i skolen og andre uddannelsesinstitutioner og bidrage til udvikling af en robotdidaktik, der kan støtte og vejlede undervisere i at foretage didaktiske valg og kvalificere eksperimenter med robotter i undervisningen.

  15. Tema 1: Robotdidaktik. Læringsrobotter som indhold i undervisningen.

    Directory of Open Access Journals (Sweden)

    Jens Jørgen Hansen

    2015-12-01

    Full Text Available Robotter er en teknologi som i disse år bevæger sig ind i skolen. Spørgsmålet er med hvilken didaktisk begrundelse og dermed læringsmæssig relevans man kan arbejde med robotter i skolen? Hvorfor skal eleverne beskæftige sig med robotter? Dette spørgsmål er en opgave for didaktikken at svare på, hvilket sætter robotdidaktik på didaktikkens landkort. I artiklen undersøges en række didaktiske designs fra projektet Fremtek,hvor lærere bl.a. har eksperimenteret med at udvikle undervisningsforløb med humanidrobotter – en slags læringsrobotter -­‐ som omdrejningspunkt (Majgaard 2014. Robotters funktion som indhold i disse didaktiske design analyseres ud fra Frede V. Nielsens fire indholdskategorier: indhold som fænomen, som realia og kontekst, som aktivitet og metode og som personligog social erfaringsfelt. Målet er at udvikle en kritisk og kreativ refleksion over og diskussion af robotteknologi som mål og middel i skolen og andre uddannelsesinstitutioner og bidrage til udvikling af en robotdidaktik, der kan støtte og vejlede undervisere i at foretage didaktiske valg og kvalificere eksperimenter med robotter i undervisningen.

  16. Rwanda - eller hvor som helst

    DEFF Research Database (Denmark)

    Sonne, Charlotte Kærgaard; Weis, Rikke Lise

    2010-01-01

    Sundhedspersonalets rolle under konflikter er ofte et springende punkt, ikke mindst fordi intellektuelle og hermed også uddannet sundhedspersonale ikke sjældent er blandt ofrene i konflikten, som vi har set det med eksemplet i Rwanda.......Sundhedspersonalets rolle under konflikter er ofte et springende punkt, ikke mindst fordi intellektuelle og hermed også uddannet sundhedspersonale ikke sjældent er blandt ofrene i konflikten, som vi har set det med eksemplet i Rwanda....

  17. The biomonitoring and bioremediation of toxic water resulting from municipal waste storage of Somârd, Sibiu county

    OpenAIRE

    Ioan C. Oprea; Dana Malschi; Liviu O. Muntean

    2013-01-01

    This paper presents information from the specialty literature and laboratory experimental results on biomonitoring, phytoextraction, biodegradation, and biotransformation of toxic water pollutants at the biotechnology laboratory of the Faculty of Environmental Science and Engineering. The study was conducted in laboratory micro tanks with contaminated water from the municipal landfill water storage pit with toxic bund of Somârd/Medias, Sibiu County, in order to research and develo...

  18. Informatikken som utopi

    Directory of Open Access Journals (Sweden)

    Jørgen Poulsen

    1986-08-01

    Full Text Available Medieforskerne mødte den nye informationsteknologi med be- tydelig skepsis i begyndelsen af 1980érne. Nu synes pendu- let at være i et andet yderpunkt og utopierne omkring in- formatikkens muligheder blomstrer. Denne artikel forsøger at se informationsteknologien i et socialt perspektiv, i forhold til brugen af andre medier, især TV og radio, og ikke som en kraft "i sig selv". Vores behov for at udføre nye kommunikative handlinger vil være afgørende for infor- matikkens succes. Og her véd vi faktisk moget: I analysen af behovene og deres sociale kontekst (som visse informa- tikutopister synes at glemme synes indsigterne fra de sid- ste 20 års positivestiske og kritiske medieforskning at være brugbare.

  19. Kunst som metode i interaktiv forskning

    DEFF Research Database (Denmark)

    Jensen, Julie Borup

    for at påvirke feltet og skabe ny viden i interaktionsprocesser, bygger dette på en antagelse om, at interaktion mellem mennesker betjener sig af såkaldte medier for kommunikation og læring (Säljö 2003:196, Bruner 1996:76). I denne forståelse kan et medium eksempelvis være sproget, skriften, praksisrutiner, men...... et medium kan også være kunst og kunstværker. Kunstværker kan ses som et udtryk for en given kulturs antagelser om virkeligheden (Bruner 1996:), men også som en provokation eller udfordring til denne virkelighedsopfattelse (Darsø 2004). I forlængelse heraf kan kunst og kunstværker ses som...

  20. Some Learning Properties of Modular Network SOMs

    Science.gov (United States)

    Takeda, Manabu; Ikeda, Kazushi; Furukawa, Tetsuo

    The Modular Network Self-Organizing Map (mnSOM) is a generalization of the SOM, where each node represents a parametric function such as a multi-layer perceptron or another SOM. Since given datasets are, in general, fewer than nodes, some nodes never win in competition and have to update their parameters from the winners in the neighborhood. This is a process that can be regarded as interpolation. This study derives the interpolation curve between winners in simple cases and discusses the distribution of winners based on the neighborhood function.

  1. Differences in SOM decomposition and temperature sensitivity among soil aggregate size classes in a temperate grasslands.

    Science.gov (United States)

    Wang, Qing; Wang, Dan; Wen, Xuefa; Yu, Guirui; He, Nianpeng; Wang, Rongfu

    2015-01-01

    The principle of enzyme kinetics suggests that the temperature sensitivity (Q10) of soil organic matter (SOM) decomposition is inversely related to organic carbon (C) quality, i.e., the C quality-temperature (CQT) hypothesis. We tested this hypothesis by performing laboratory incubation experiments with bulk soil, macroaggregates (MA, 250-2000 μm), microaggregates (MI, 53-250 μm), and mineral fractions (MF, temperature and aggregate size significantly affected on SOM decomposition, with notable interactive effects (Ptemperature in the following order: MA>MF>bulk soil >MI(P classes (P temperature is closely associated withsoil aggregation and highlights the complex responses of ecosystem C budgets to future warming scenarios.

  2. Poster som et pædagogisk redskab i sygeplejerskeuddannelsen

    DEFF Research Database (Denmark)

    Bagger, Bettan; Kelly, Hélène

    2008-01-01

    Som undervisere har vi gode erfaringer med, at de studerende anvender posters som redskab for formidling af viden. Posterne bruges som udgangspunkt for en mundtlig formidling af faglige perspektiver til de øvrige studerende. Formålet med at anvende formidling ved hjælp af en poster i...

  3. Idrætten som social generator

    DEFF Research Database (Denmark)

    Kural, René

    2002-01-01

    Med henvisning til to svømmehaller i hhv. Manchester og Berlin illustrerers det, hvorledes idrætten, store sportslige begivenheder og sportsfaciliteterne kan fungere som social generator for hele byafsnit.......Med henvisning til to svømmehaller i hhv. Manchester og Berlin illustrerers det, hvorledes idrætten, store sportslige begivenheder og sportsfaciliteterne kan fungere som social generator for hele byafsnit....

  4. Tv-fiktion som tværmedial oplevelsesdesign

    DEFF Research Database (Denmark)

    Sandvik, Kjetil

    2010-01-01

    konstrueres og et bestemt handlingsforløb simuleres, fra de mere kulørte og parapsykologisk funderede fremgangmetoder i serier som The Profiler og Medium, til mere realistiske praksiser som i Rejseholdet og CSI. Og jeg vil endvidere lave en sammenlignende analyse med virkelighedens gerningsstedsefterforskning...

  5. Videokameraet som etnografisk redskab online og offline

    DEFF Research Database (Denmark)

    Rehder, Mads Middelboe

    2013-01-01

    “Med udgangspunkt i et visuelt feltarbejde såvel online som offline, på YouTube og i New York City, beskæftiger dette kapitel sig med kameraet som medieringsteknologi, med fokus på levende billeder. Det diskuteres, hvordan kameraets multiple anvendelsesmuligheder empirisk og metodisk kan skabe...... forskellige muligheder og begrænsninger i et feltarbejde, samt hvordan det visuelle materiale kan variere som resultat af disse forskellige anvendelser. Den indledende del af kapitlet består af en beskrivelse af det empiriske felt online på YouTube, og det diskuteres, hvordan et online felt relaterer sig til...

  6. Queer eller manden som ideal

    DEFF Research Database (Denmark)

    Sjørup, Karen

    2016-01-01

    Forestillingen om barnet som den i kønslig forstand renvaskede tavle er fejlagtig og selvmodsigende. I stedet bør forældre og samfund give børn ballast til at begive sig ud i livet uden for mange normative direktiver.......Forestillingen om barnet som den i kønslig forstand renvaskede tavle er fejlagtig og selvmodsigende. I stedet bør forældre og samfund give børn ballast til at begive sig ud i livet uden for mange normative direktiver....

  7. Fællesskab som fællesgørende bevægelse?

    DEFF Research Database (Denmark)

    Khawaja, Iram

    2014-01-01

    man kan tale om, og som noget, der konstant forhandles. 3. Fællesskab som situeret og forbundet med subjektivering 4. Fællesskab som hverken overindividuel eller subjektiv bevægelse og 5. Fællesskab som forbundet med belonging. Artiklen bevæger sig imellem teoretisk og empirisk analyse og inddrager et...... fokus på belonging som en central dimension i forståelsen af konstruktionen af fællesskaber....

  8. Space Charge Effects for the ERL Prototype Injector Line at Daresbury Laboratory

    CERN Document Server

    Muratori, Bruno; Owen, Hywel; de Loos, Marieke; van der Geer, Bas

    2005-01-01

    Daresbury Laboratory is currently building an Energy Recovery Linac Prototype (ERLP) that will operate at a beam energy of 35 MeV. In this paper we examine the space charge effects on the beam dynamics in the ERLP injector line. A Gaussian particle distribution is tracked with GPT (General Particle Tracer) through the injection line to the main linac to calculate the effect of 3Dspace charge in the dipoles. The nominal beam energy in the injection line is 8.3 MeV and the bunch charge 80 pC. The effects of space charge on the transverse and longitudinal emittance are studied for various electron beam parameter settings.

  9. Musikterapi som samværsform

    DEFF Research Database (Denmark)

    Ridder, Hanne Mette Ochsner

    2005-01-01

    Det kan være svært for mennesker med omfattende demenssymptomer at deltage i aktiviteter eller samvær med andre – og uden interaktion med andre kan det være svært at få dækket psykosociale behov. Der er derfor brug for samvær og aktiviteter som er specielt tilrettelagt for at opfylde psykosociale...... erfaringer indenfor demensområdet. Der vil i foredraget blive taget udgangspunkt i praksiserfaring som musikterapeut på Plejehjemmet Caritas samt i et forskningsprojekt om individuel musikterapi, hvorfra der bliver vist videoeksempler....

  10. Fænomenologisk dekonstruktion som udspørgning

    DEFF Research Database (Denmark)

    Keller, Kurt Dauer

    Merleau-Ponty skelner udspørgning (interrogation) fra de dominerende opfattelser af refleksion, dialektik og intuition. Udspørgning må betragtes som hans bud på den begrebs- og traditionskritik, Heidegger kaldte ”destruktion”, og som Derrida førte videre under den mere adækvate betegnelse...

  11. Coloured solar collectors. Phase II : from laboratory samples to collector prototypes. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Schueler, A; Roecker, Ch; Chambrier, E de; Munari Probst, M

    2007-07-01

    This illustrated final report for the Swiss Federal Office of Energy (SFOE) deals with the second phase of a project concerning the architectural integration of glazed solar collectors into the facades of buildings for heat production. The factors that limit the integration of photovoltaic panels in facades are discussed. The authors state that, for a convincing demonstration, sufficiently large samples and high quality levels are needed. The sol-gel deposition of the multi-layered coatings on A4-sized glass panes demonstrated in the laboratory by EPFL-LESO are discussed. The coatings produced exhibit a coloured reflection in combination with a high solar transmittance, a homogenous appearance, and are free of visible defects. Film hardening by UV exposure is discussed: This should result in the speeding up of the sol-gel process and thus save energy, thereby significantly reducing costs. Collaboration with industry is discussed in which full-scale glass panes are to be coated with novel multiple layers. The novel glazing is to be integrated into first prototype collectors. The manufacturing and test processes for the prototypes manufactured are discussed in detail.

  12. Engineering prototypes for theta-pinch devices

    International Nuclear Information System (INIS)

    Hansborough, L.D.; Hammer, C.F.; Hanks, K.W.; McDonald, T.E.; Nunnally, W.C.

    1975-01-01

    Past, present, and future engineering prototypes for theta-pinch plasma-physics devices at Los Alamos Scientific Laboratory are discussed. Engineering prototypes are designed to test and evaluate all components under system conditions expected on actual plasma-physics experimental devices. The importance of engineering prototype development increases as the size and complexity of the plasma-physics device increases. Past experiences with the Scyllac prototype and the Staged Theta-Pinch prototype are discussed and evaluated. The design of the proposed Staged Scyllac prototype and the Large Staged Scyllac implosion prototype assembly are discussed

  13. Brands som ideologiske parasitter

    DEFF Research Database (Denmark)

    Hermansen, Judy

    2009-01-01

    De store, stærke brands, som rager op over alle andre som repræsentanter for nogle værdier, der bliver lagt vægt på i samfundet, kalder Douglas Holt for ikoniske. Vi snakker Coca Cola, Nike, Apple ligaen. For at opnå en sådan status er brandingen nødt til at holde et vågent øje med tendenser og...

  14. Selvskade som selvteknologi

    DEFF Research Database (Denmark)

    Rasmussen, Anna Lanken; Rasmussen, Svend Aage

    2016-01-01

    livshandlinger” – selvskade som social lidelse. Herefter argumenterer forfatterne med udgangspunkt i et feltstudie af Helen Gremillion for vigtigheden af at kaste et kritisk blik på behandlingskultur. Denne kritik videreføres i et afsnit om den postmoderne udfordring i forhold til selvskade. Afslutningsvis...

  15. Evaluation of a prototype infrasound system

    International Nuclear Information System (INIS)

    Whitaker, R.; Sandoval, T.; Breding, D.; Kromer, D.

    1997-01-01

    Under Department of Energy sponsorship, Sandia National Laboratories and Los Alamos National Laboratory cooperated to develop a prototype infrasonic array, with associated documentation, that could be used as part of the International Monitoring System. The United States Government or foreign countries could procure commercially available systems based on this prototype to fulfill their Comprehensive Test Ban Treaty (CTBT) obligations. The prototype is a four-element array in a triangular layout as recommended in CD/NTB/WP.224 with an element at each corner and one in the center. The prototype test configuration utilize an array spacing of 1 km. The prototype infrasound system has the following objectives: (1) Provide a prototype that reliably acquires and transmits near real-time infrasonic data to facilitate the rapid location and identification of atmospheric events. (2) Provide documentation that could be used by the United States and foreign countries to procure infrasound systems commercially to fulfill their CTBT responsibilities. Infrasonic monitoring is an effective, low cost technology for detecting atmospheric explosions. The low frequency components of explosion signals propagate to long ranges (few thousand kilometers) where they can be detected with an array of sensors. Los Alamos National Laboratory's expertise in infrasound systems and phenomenology when combined with Sandia's expertise in providing verification quality system for treaty monitoring make an excellent team to provide the prototype infrasound sensor system. By September 1997, the prototype infrasound system will have been procured, integrated, evaluated and documented. Final documentation will include a system requirements document, an evaluation report and a hardware design document. The hardware design document will describe the various hardware components used in the infrasound prototype and their interrelationships

  16. Varehusbesøget som fornøjeligt hverdagsdrama

    DEFF Research Database (Denmark)

    Bouchet, Julie Kirstine Linderoth; Jantzen, Christian

    2014-01-01

    Artiklen analyserer de koreografiske, scenografiske og dramaturgiske virkemidler, som IKEA har anvendt til at skabe et succesfuldt oplevelsesdesign.......Artiklen analyserer de koreografiske, scenografiske og dramaturgiske virkemidler, som IKEA har anvendt til at skabe et succesfuldt oplevelsesdesign....

  17. Colors and prototypes

    DEFF Research Database (Denmark)

    Madsen, Klaus; Thomsen, Bente Dahl

    2012-01-01

    Farvesætning af produkter udnyttes især som et middel til at højne produktets visuelle appel. Farver kan forholdsvis let tilføjes og udskiftes, og udnyttes som en billig måde at forny et produkt. Det er et problem ud fra et designsynspunkt, idet den visuelle appel er en æstetisk kvalitet, der sjæ...... Performance Indicatoren1 (KPI). Indslagene sætter fokus på frembringelse af modeloverflader som formidler designeres intentioner for produktets overflader så sandt som muligt....

  18. Digitalisering som kulturpolitik

    DEFF Research Database (Denmark)

    Lund, Niels Dichov

    2009-01-01

    Begreberne kulturarv, digitalisering og formidling drøftes generelt som væsentlige nutidsagendaer i lyset af en treeninghed af teknologi, demokrati og kultur. Digital formidling af kulturarv belyses i forhold til en længere dobbbeltsporet forskningskontekst mellem IKT og humaniora og ses primært...

  19. IKT som empowerment af lærer og elever!

    DEFF Research Database (Denmark)

    Christiansen, René B.; Binggeli, Andreas

    2011-01-01

    I denne korte artikel ønsker vi at pege på at ikt kan fungere som empowerment for både lærere og elever i skolen. It optræder i forvejen i alt for mange menneskers bevidsthed som en barriere eller som en sten i den pædagogiske sundhedssandal. Vi har begge på egen krop oplevet at arbejdet med ny t...

  20. Kan Batman dateres? Om massekommunikasjonen som kulturhistorie

    Directory of Open Access Journals (Sweden)

    Hans Frederik Dahl

    1990-08-01

    Full Text Available Hans Frederik Dahls artikel er et bud på om massekommunikationen kan tænkes ind i kulturhistorien.Første halvdel af artiklen fremhæver de prob- lemer, det rejser, når massekommunikation med dens karakteristika i form af serialitet, triviatitet og internationalitet skal reflekteres i forhold til en kulturhistorisk tradition, som normalt tænker i begreber som tidsånd, kunstnerisk originalitet og nationalt særpræg. Sidste halvdel focuserer på tre centrale aspekter ved massekommunikationen, som også er af- gørende for dens kulturhistorie: dens nære forbindelse til musikken, dens internationale karakter og dens konstante tilbagevenden til tidligere pro- dukter.

  1. Kan Batman dateres? Om massekommunikasjonen som kulturhistorie

    Directory of Open Access Journals (Sweden)

    Hans Frederik Dahl

    1990-06-01

    Full Text Available Hans Frederik Dahls artikel er et bud på om massekommunikationen kan tænkes ind i kulturhistorien.Første halvdel af artiklen fremhæver de prob- lemer, det rejser, når massekommunikation med dens karakteristika i form af serialitet, triviatitet og internationalitet skal reflekteres i forhold til en kulturhistorisk tradition, som normalt tænker i begreber som tidsånd, kunstnerisk originalitet og nationalt særpræg. Sidste halvdel focuserer på tre centrale aspekter ved massekommunikationen, som også er af- gørende for dens kulturhistorie: dens nære forbindelse til musikken, dens internationale karakter og dens konstante tilbagevenden til tidligere pro- dukter.

  2. Om filmteori og filmhistorie: Stumfilmen som eksempel

    Directory of Open Access Journals (Sweden)

    Casper Tybjerg

    1995-09-01

    Full Text Available Tilbage til filmene og filmmagerne siger Casper Tybjerg i denne artikel. Han plæderer dog ikke nødvendigvis for en tilbagevending til "gammel- dags filmhistorieskrivning" og til en fokusering kun på film som æstetik og kunst. Med udgangspunkt i konkrete overvejelser over den danske stumfilm og gennemgang af væsentlige nyere filmhistoriske værker og teorier polemiserer han mod det han opfatter som upræcise og meget abstrakte kulturalistiske positioner, som enten glemmer de konkrete film eller overbetoner det blot formelle i filmhistorien. Samtidig tegner han også et levende billede af den kultur og de betingelser den tidlige film blev til i.

  3. Rapid BeagleBoard prototyping with MATLAB and Simulink

    CERN Document Server

    Qin, Fei

    2013-01-01

    This book is a fast-paced guide with practical, hands-on recipes which will show you how to prototype Beagleboard-based audio/video applications using Matlab/Simlink and Sourcery Codebench on a Windows host.Beagleboard Embedded Projects is great for students and academic researchers who have practical ideas and who want to build a proof-of-concept system on an embedded hardware platform quickly and efficiently. It is also useful for product design engineers who want to ratify their applications and reduce the time-to-market. It is assumed that you are familiar with Matlab/Simulink and have som

  4. Kierkegaard som eksistentiel fænomenolog

    DEFF Research Database (Denmark)

    Kierkegaard som eksistentiel fænomenolog er en antologi, som fremhæver de fænomenologiske aspekter i Kierkegaards beskrivelser af de grundlæggende fænomener i den menneskelige tilværelse. Den fokuserer på Kierkegaards anskuelse af mennesket som en konkret eksisterende person, et tænkende, følende...... og handlende subjekt, der altid har til opgave at forholde sig til sig selv, sin omverden og de andre. Bogen behandler for det første Kierkegaards eget fænomenologiske projekt og hans analyser af angst, fortvivlelse, blufærdighed, samvittighed, selvbedrag og autenticitet. For det andet hans forhold...... til samtidens eksistentielle tænkning (bl.a. Schelling og Poul Martin Møller) og ikke mindst hans forhold til eftertidens eksistentielle tænkning (bl.a. Jaspers, Wittgenstein, Agampen og Zisek). Og for det tredje Kierkegaards betydning for den senere eksistentielle psykologi og psykiatri....

  5. Multi-SOM: an Algorithm for High-Dimensional, Small Size Datasets

    Directory of Open Access Journals (Sweden)

    Shen Lu

    2013-04-01

    Full Text Available Since it takes time to do experiments in bioinformatics, biological datasets are sometimes small but with high dimensionality. From probability theory, in order to discover knowledge from a set of data, we have to have a sufficient number of samples. Otherwise, the error bounds can become too large to be useful. For the SOM (Self- Organizing Map algorithm, the initial map is based on the training data. In order to avoid the bias caused by the insufficient training data, in this paper we present an algorithm, called Multi-SOM. Multi-SOM builds a number of small self-organizing maps, instead of just one big map. Bayesian decision theory is used to make the final decision among similar neurons on different maps. In this way, we can better ensure that we can get a real random initial weight vector set, the map size is less of consideration and errors tend to average out. In our experiments as applied to microarray datasets which are highly intense data composed of genetic related information, the precision of Multi-SOMs is 10.58% greater than SOMs, and its recall is 11.07% greater than SOMs. Thus, the Multi-SOMs algorithm is practical.

  6. Industrirobotten som servomekanisme

    DEFF Research Database (Denmark)

    Sørensen, Torben

    2001-01-01

    ). Bevægeleddene er typisk enten roterende drejeled, eller lineære forskydningsled. Rotationen eller forskydningen mellem to bevægeled varetages af en servostyret motor. Selve robotarmen er forbundet til robottens base gennem et bevægeled (servoakse) som bærer hele armen - det vil sige alle armens elementer og...

  7. Krisen som udfordring

    DEFF Research Database (Denmark)

    Højrup, Thomas

    2009-01-01

    Om Thorupstrand Kystfiskerlaug, Han Herred Puljefiskeri og Han Herred Havbådes innovative bidrag til en samlet indsats for at sikre kystfiskeriet i Skagerrak fra åben strand som en levende og håndværksbåret kystkultur i Danmark. Den venturekapitalistiske højkonjunktur, regeringens privatiseringsp...

  8. Det nordiske som brandværdi

    DEFF Research Database (Denmark)

    Hermansen, Judy

    2009-01-01

    Kommunikation spiller en vigtig rolle for, hvilke associationer forbrugeren har til brandet. Og da brand image består af summen af alle corporate aktiviteter, er der ifølge Roncha især én fællesnævner, som styrker strategierne bag nordisk brand management: Opbygningen af et globalt og konsistent...... brand under en nordisk designparaply, fordi design i mange år reelt har været en integreret del af det kulturelle og samfundsmæssige liv i Skandinavien. Men ikke alle nordiske designere, er tilfredse med de stilistiske associationer og begrænsninger, som er vokset op omkring det nordiske brand. Derfor...... er det også vigtigt at arbejde aktivt på at udvikle dets symbolske værdi. Der er ifølge Roncha en unik chance for at skabe et bæredygtigt brand, som ikke kun handler om bestemte stilarter eller kunstneriske værdier, men også om kvalitet og innovation. Udgivelsesdato: April...

  9. Corporate film som værktøj til employer branding

    DEFF Research Database (Denmark)

    Hansen, Heidi

    2016-01-01

    En corporate film kan ses som organisationens autoritative tekst kommunikeret i en enkelt digital fortælling. I denne artikel belyses corporate film som genre fra henholdsvis kommunikationsdirektørens, forskerens, det kreative bureau og filmskaberens side.......En corporate film kan ses som organisationens autoritative tekst kommunikeret i en enkelt digital fortælling. I denne artikel belyses corporate film som genre fra henholdsvis kommunikationsdirektørens, forskerens, det kreative bureau og filmskaberens side....

  10. Insulin som trickster

    DEFF Research Database (Denmark)

    Lassen, Aske Juul

    2011-01-01

    grænser nedbrydes i en konstant penetrering af huden, når blodsukkeret måles eller insulinen indsprøjtes. Insulin analyseres som en tricksterfigur, der udøver et grænsearbejde på kroppen, leger med dens kategorier og vender forholdet mellem gift og medicin, frihed og ufrihed, kunstighed og naturlighed...

  11. Kroppen som monitor

    DEFF Research Database (Denmark)

    Filges, Tine

    2005-01-01

    Tine Filges tager fat i de unges brug og forhold til porno, og har som en central pointe, at unge langt fra er en homogen gruppe. Der er væsentlige forskelle i unges forhold til deres krop. Dette lyder måske banalt og indlysende, men det er en pointe, der ofte glemmes i den offentlige debat om unge...... og deres kroppe. Abstract: Unges kroppe forbindes ofte med risici og farer. Vi lurer farer alle steder, og medierne er fulde af overskrifter: Fedmeepidemier. Unge med åreforkalkning. Druk. Porno. Spiseforstyrrelser. Selvskadende adfærd. I takt med at kroppen monitoreres, er den i stigende grad blevet...... koloniseret af en bekymret hær af forskere, forældre, pædagoger og terapeuter. Vi spørger ængsteligt: Vil de unge lave deres krop om livet igennem? Vil de virkelig have plastik i brysterne? Vil den næste generation tage Viagra som 18-årige? Kan unge indgå i intime relationer, når de er vokset op med porno på...

  12. Music playlist generation by assimilating GMMs into SOMs

    NARCIS (Netherlands)

    Balkema, Wietse; van der Heijden, Ferdinand

    A method for music playlist generation, using assimilated Gaussian mixture models (GMMs) in self organizing maps (SOMs) is presented. Traditionally, the neurons in a SOM are represented by vectors, but in this paper we propose to use GMMs instead. To this end, we introduce a method to adapt a GMM

  13. Om dass-sætninger som afficeret eller efficeret objekt

    DEFF Research Database (Denmark)

    Holsting, Alexandra

    2013-01-01

    Temaet for nærværende artikel er en diskussion af muligheden for at fastlægge en tysk dass-sætnings semantiske funktion som afficeret eller efficeret objekt , når den optræder i rollen som komplement for verber, der har såvel en afficerende som en efficerende betydningsvariant, hvorved dass......-sætningen i det første tilfælde betegner et forhold, matrixsætningens subjektsreferent reagerer på, og i det andet indholdet af en ytring, der fremsættes af matrixsætningens subjektsreferent. Jeg går i artiklen særligt ind i diskussionen om, hvorvidt dass-sætningens modus kan tjene som formel indikation på...... den semantiske funktion, dvs. om en dass-sætning i konjunktiv utvetydigt kan tilskrives en funktion som efficeret objekt for matrixsætningsverbet....

  14. Field evaluation of prototype electrofibrous filters

    International Nuclear Information System (INIS)

    Kuhl, W.D.; Bergman, W.; Biermann, A.H.; Lum, B.Y.

    1982-01-01

    New prototype electrofibrous filters were designed, built and evaluated in laboratory tests and in field installations. Two prototypes were designed for use in nuclear ventilation ducts as prefilters to HEPA filters. One prototype is designed to be a permanent component of the ventilation system while the other is a disposable unit. The disposable electrofibrous prefilter was installed in the exhaust stream of a glove box in which barrels of uranium turnings are burned. Preliminary tests show the disposal prefilter is effectively prolonging the HEPA filter life. An earlier prototype of the rolling prefilter was upgraded to meet the increased requirements for installation in a nuclear facility. This upgraded prototype was evaluated in the fire test facility at LLNL and shown to be effective in protecting HEPA filters from plugging under the most severe smoke conditions. The last prototype described in this report is a recirculating air filter. After demonstrating a high performance in laboratory tests the unit was shipped to Savannah River where it is awaiting installation in a Pu fuel fabrication facility. An analysis of the particulate problem in Savannah River indicates that four recirculating air filter will save $172,000 per year in maintenance costs

  15. Udvidelsen af relationsfeltets didaktik – med religionsundervisningen som eksempel

    DEFF Research Database (Denmark)

    Skovmand, Keld

    beskrive denne dobbeltbevægelse som en almen fagdidaktik (Nielsen 1998 [1994]) eller – med inspiration fra Klafki – en relationsfeltets didaktik (Nielsen 2012). Dobbeltblikket på didaktikken som et relationsfelt kan kvalificeres ved hjælp af de fire kriterier for indholdsvalg, som er udformet af Frede V...... specificere indhold (DuFour & Marzano 2011). Referencer DuFour, Richard & Marzano, Robert J. 2011: Leaders of learning. How district, school, and classroom leaders improve student achievement. Bloomington, IN: Solution Tree Press. Hattie, John 2009: Visible learning. A synthesis of over 800 meta...

  16. Ole Rømer som enevældens administrator

    DEFF Research Database (Denmark)

    Olden-Jørgensen, Sebastian

    2002-01-01

    En gennemgang af Ole Rømers liv med vægt på hans rolle som embedsmand og hans deltagelse eller mangel på samme i det politiske spil.......En gennemgang af Ole Rømers liv med vægt på hans rolle som embedsmand og hans deltagelse eller mangel på samme i det politiske spil....

  17. Sprog som musikalsk notation

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    Artiklen behandler sprogbrug som supplement til noderne fra barokken og frem; Fluxus og Scratch Orchestra; den engelske Verbal Anthology; Stockhausens brug af verbal notation før tekst-samlingerne; detaljerede analyser af de to samlinger. Der konkluderes bla. om forskellige grader af fastlæggelse...

  18. Fabrication and Prototyping Lab

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose: The Fabrication and Prototyping Lab for composite structures provides a wide variety of fabrication capabilities critical to enabling hands-on research and...

  19. A COMPUTERIZED OPERATOR SUPPORT SYSTEM PROTOTYPE

    Energy Technology Data Exchange (ETDEWEB)

    Thomas A. Ulrich; Roger Lew; Ronald L. Boring; Ken Thomas

    2015-03-01

    A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. A prototype COSS was developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, piping and instrumentation diagram system representations, and a recommender module for mitigation actions. The initial version of the prototype is now operational at the Idaho National Laboratory using the Human System Simulation Laboratory.

  20. Distribution of peptidergic populations in the human dentate gyrus (somatostatin [SOM-28, SOM-12] and neuropeptide Y [NPY]) during postnatal development.

    Science.gov (United States)

    Cebada-Sánchez, S; Insausti, R; González-Fuentes, J; Arroyo-Jiménez, M M; Rivas-Infante, E; Lagartos, M J; Martínez-Ruiz, J; Lozano, G; Marcos, P

    2014-10-01

    The postnatal development of the human hippocampal formation establishes the time and place at which we start autobiographical memories. However, data concerning the maturation of the neurochemical phenotypes characteristic of interneurons in the human hippocampus are scarce. We have studied the perinatal and postnatal changes of the dentate gyrus (DG) interneuron populations at three rostrocaudal levels. Immunohistochemically identified neurons and fibers for somatostatin (SOM-12 and SOM-28) and neuropeptide Y (NPY) and the co-localization of SOM-28 and NPY were analyzed. In total, 13 cases were investigated from late pregnancy (1 case), perinatal period (6 cases), first year (1 case), early infancy (3 cases), and late infancy (2 cases). Overall, the pattern of distribution of these peptides in the DG was similar to that of the adult. The distribution of cells was charted, and the cell density (number of positive cells/mm(2)) was calculated. The highest density corresponded to the polymorphic cell layer and was higher at pre- and perinatal periods. At increasing ages, neuron density modifications revealed a decrease from 5 postnatal months onward. In contrast, by late infancy, two immunoreactive bands for SOM-28 and NPY in the molecular layer were much better defined. Double-immunohistochemistry showed that NPY-positive neurons co-localized with SOM-28, whereas some fibers contained only one or other of the neuropeptides. Thus, this peptidergic population, presumably inhibitory, probably has a role in DG maturation and its subsequent functional activity in memory processing.

  1. Schelling og Nietzsche som kritikere af Descartes

    DEFF Research Database (Denmark)

    Liisberg, Sune

    2008-01-01

    : 'Hvad er det første for mig' - og svaret var: 'Det er jeg selv'. Cogito-argumentet, der implicerer en forudgående beslutning om at drage alt i tvivl, manifesterer således en historisk enestående 'frigørelse fra al autoritet' (Schelling). Ifølge Schelling - der ligesom Schopenhauer og Nietzsche havde...... blik for, at cogito-argumentet og dets problemer har med dets sprogbundethed at gøre - er ytringsdimensionen nu helt afgørende for cogito-argumentets meningsfuldhed, da allerede 'den blotte tanke 'Jeg er' kan forstås som en indre ytring og forudsætter et talende jeg'. Nietzsche henleder opmærksomheden...... på, at 'eftersom Descartes formulerer cogito-argumentet sprogligt, kan det ikke være nogen umiddelbar, første erkendelse'. Nietzsche antager nemlig, at Descartes selv fejlagtigt betragtede cogito-argumentet som en umiddelbar vished - altså strengt taget ikke som et argument. Men Descartes blev...

  2. Deep SOMs for automated feature extraction and classification from big data streaming

    Science.gov (United States)

    Sakkari, Mohamed; Ejbali, Ridha; Zaied, Mourad

    2017-03-01

    In this paper, we proposed a deep self-organizing map model (Deep-SOMs) for automated features extracting and learning from big data streaming which we benefit from the framework Spark for real time streams and highly parallel data processing. The SOMs deep architecture is based on the notion of abstraction (patterns automatically extract from the raw data, from the less to more abstract). The proposed model consists of three hidden self-organizing layers, an input and an output layer. Each layer is made up of a multitude of SOMs, each map only focusing at local headmistress sub-region from the input image. Then, each layer trains the local information to generate more overall information in the higher layer. The proposed Deep-SOMs model is unique in terms of the layers architecture, the SOMs sampling method and learning. During the learning stage we use a set of unsupervised SOMs for feature extraction. We validate the effectiveness of our approach on large data sets such as Leukemia dataset and SRBCT. Results of comparison have shown that the Deep-SOMs model performs better than many existing algorithms for images classification.

  3. Portræt af litteraturkritikeren som ungt menneske

    DEFF Research Database (Denmark)

    Schatz-Jakobsen, Claus

    2004-01-01

    Artiklen præsenterer den amerikanske litteraturkritiker Geoffrey Hartmans tidlige forfatterskab og fremdrager dets selvbiografiske undertekst som nødvendig effekt af den unge Hartmans fascination af den engelske romantiker William Wordsworths forfatterskab.......Artiklen præsenterer den amerikanske litteraturkritiker Geoffrey Hartmans tidlige forfatterskab og fremdrager dets selvbiografiske undertekst som nødvendig effekt af den unge Hartmans fascination af den engelske romantiker William Wordsworths forfatterskab....

  4. Visual interaction: models, systems, prototypes. The Pictorial Computing Laboratory at the University of Rome La Sapienza.

    Science.gov (United States)

    Bottoni, Paolo; Cinque, Luigi; De Marsico, Maria; Levialdi, Stefano; Panizzi, Emanuele

    2006-06-01

    This paper reports on the research activities performed by the Pictorial Computing Laboratory at the University of Rome, La Sapienza, during the last 5 years. Such work, essentially is based on the study of humancomputer interaction, spans from metamodels of interaction down to prototypes of interactive systems for both synchronous multimedia communication and groupwork, annotation systems for web pages, also encompassing theoretical and practical issues of visual languages and environments also including pattern recognition algorithms. Some applications are also considered like e-learning and collaborative work.

  5. Development of a laboratory prototype water quality monitoring system suitable for use in zero gravity

    Science.gov (United States)

    Misselhorn, J. E.; Witz, S.; Hartung, W. H.

    1973-01-01

    The development of a laboratory prototype water quality monitoring system for use in the evaluation of candidate water recovery systems and for study of techniques for measuring potability parameters is reported. Sensing techniques for monitoring of the most desirable parameters are reviewed in terms of their sensitivities and complexities, and their recommendations for sensing techniques are presented. Rationale for selection of those parameters to be monitored (pH, specific conductivity, Cr(+6), I2, total carbon, and bacteria) in a next generation water monitor is presented along with an estimate of flight system specifications. A master water monitor development schedule is included.

  6. Børn med diagnoser som pædagogisk-psykologisk udfordring

    DEFF Research Database (Denmark)

    Bøttcher, Louise

    2013-01-01

    hovedsageligt vanskelighederne ud fra en social vinkel. Den artikels dialektiske balancegang mellem de to positioner vil udfolde en forståelse af diagnoser som ADHD eller autismespektrumforstyrrelser, som tager udgangspunkt i at en eller flere biologiske afvigelser meget vel kan være den oprindelige årsag til...... hvordan uoverensstemmelsen mellem barnet og omgivelserne skaber problemer og udfordringer, kan diagnosen blive nyttig. Nemlig som dialektisk redskab til at analysere de psykologiske og pædagogiske udviklingsmæssige konsekvenser af at have en psykisk udviklingsforstyrrelse af typen ASD eller ADHD – frem...

  7. Turistkort som geografisk kommunikation

    DEFF Research Database (Denmark)

    Nielsen, Niels Christian

    2009-01-01

      Kort har længe spillet en central rolle i turisters ferieplanlægning og aktiviteter på feriestedet, og forventes at gøre det i fremtiden, suppleret med andre kilder til geografisk information. Men først i forbindelse med introduktionen af GIS og mobile applikationer som telefon og GPS er den...

  8. Som at noget lettede

    DEFF Research Database (Denmark)

    Berliner, Peter; Glendøs, Mia

    2010-01-01

    Den høje voldsrate i Kalaallit Nunaat (Grønland) forklares ofte ud fra alkoholmisbrug og affektive handlinger. I denne artikel vises det gennem en kvantitativ og kvalitativ undersøgelse, at den episodiske vold må forstås som symptomer på strukturel vold. Den strukturelle vold er en kontekst, der ...

  9. Prototype HL-LHC magnet undergoes testing

    CERN Multimedia

    Corinne Pralavorio

    2016-01-01

    A preliminary short prototype of the quadrupole magnets for the High-Luminosity LHC has passed its first tests.   The first short prototype of the quadrupole magnet for the High Luminosity LHC. (Photo: G. Ambrosio (US-LARP and Fermilab), P. Ferracin and E. Todesco (CERN TE-MSC)) Momentum is gathering behind the High-Luminosity LHC (HL-LHC) project. In laboratories on either side of the Atlantic, a host of tests are being carried out on the various magnet models. In mid-March, a short prototype of the quadrupole magnet underwent its first testing phase at the Fermilab laboratory in the United States. This magnet is a pre-prototype of the quadrupole magnets that will be installed near to the ATLAS and CMS detectors to squeeze the beams before collisions. Six quadrupole magnets will be installed on each side of each experiment, giving a total of 24 magnets, and will replace the LHC's triplet magnets. Made of superconducting niobium-tin, the magnets will be more powerful than their p...

  10. Naval Prototype Optical Interferometer (NPOI)

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Used for astrometry and astronomical imaging, the Naval Prototype Optical Interferometer (NPOI) is a distributed aperture optical telescope. It is operated...

  11. Facility for the testing of the TFTR prototype neutral beam injector

    Energy Technology Data Exchange (ETDEWEB)

    Haughian, J.M.

    1977-07-01

    The design of the prototype neutral beam injection system for TFTR is nearing completion at the Lawrence Livermore Laboratory. This paper describes some of the features of the facility at the Lawrence Berkeley Laboratory where this prototype will be assembled and tested.

  12. Facility for the testing of the TFTR prototype neutral beam injector

    International Nuclear Information System (INIS)

    Haughian, J.M.

    1977-07-01

    The design of the prototype neutral beam injection system for TFTR is nearing completion at the Lawrence Livermore Laboratory. This paper describes some of the features of the facility at the Lawrence Berkeley Laboratory where this prototype will be assembled and tested

  13. Interaktiv forskning som samarbejdsdrevet innovation

    DEFF Research Database (Denmark)

    Martinez, Laia

    2012-01-01

    Hovedformålet med denne artikel er at formidle nogle af de metodiske overvejelser, som jeg har gjort mig om samspillet mellem forskere og praktikere i forbindelse med gennemførelsen af mit Ph.d.-projekt om innovationsledelse i danske kommuner....

  14. Gruppen som container og potentielt læringsrum gennem refleksion

    DEFF Research Database (Denmark)

    Søbirk, Helle Henni

    2012-01-01

    Al psykomotorisk intervention foregår i en relation mellem den psykomotoriske terapeut og individ eller gruppe. Derfor anses relations- og refleksionskompetencer som fagpersonlige kernekompetencer i den psykomotoriske praksis og er et centralt formål med "anvendte grupper" som hhv. udviklings-, t...

  15. CEMSKUM - Anvendelighed som isoleringsmateriale i bygninger

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place

    2002-01-01

    Resume af rapport om mulighederne for at anvende Cemskum som isoleringsmateriale i bygningskonstruktioner, udarbejdet af Cemsystems I/S under Energistyrelsens udviklingsprogram "Miljø- og arbejdsmiljøvenlig isolering"...

  16. «Halvdød av frost, men levende og beredt». Speiderbevegelsen som disiplineringsprosjekt

    OpenAIRE

    Schaanning, Espen

    2013-01-01

    I det som gjerne betegnes som speidernes Bibel, Scouting for Boys (1908), løftet speiderbevegelsens grunnlegger, Robert Baden-Powell (1857–1941), fram personer som alle speidergutter burde ha som forbilder. Et slikt forbilde beskrives slik: «Den romerske soldaten fra gamle dager, som ble stående på sin post da Pompeii ble begravd av lava og aske fra vulkanen Vesuv, viste lojalitet mot sin plikt. De har funnet liket hans og kan se hvordan han holdt hånden foran munn og nese for ikke å bli kval...

  17. Comparative Study of Laboratory-Scale and Prototypic Production-Scale Fuel Fabrication Processes and Product Characteristics

    International Nuclear Information System (INIS)

    2014-01-01

    An objective of the High Temperature Gas Reactor fuel development and qualification program for the United States Department of Energy has been to qualify fuel fabricated in prototypic production-scale equipment. The quality and characteristics of the tristructural isotropic coatings on fuel kernels are influenced by the equipment scale and processing parameters. Some characteristics affecting product quality were suppressed while others have become more significant in the larger equipment. Changes to the composition and method of producing resinated graphite matrix material has eliminated the use of hazardous, flammable liquids and enabled it to be procured as a vendor-supplied feed stock. A new method of overcoating TRISO particles with the resinated graphite matrix eliminates the use of hazardous, flammable liquids, produces highly spherical particles with a narrow size distribution, and attains product yields in excess of 99%. Compact fabrication processes have been scaled-up and automated with relatively minor changes to compact quality to manual laboratory-scale processes. The impact on statistical variability of the processes and the products as equipment was scaled are discussed. The prototypic production-scale processes produce test fuels that meet fuel quality specifications.

  18. Lekfull kreativitet. Fysiska användargränssnitt som erbjuder social och fysisk interaktion

    DEFF Research Database (Denmark)

    Brooks, Eva Irene

    2017-01-01

    I den här artikeln presenteras en studie som ägde rum under två år i fem olika förskolor i Danmark och som inkluderade 55 barn. Specifikt undersökte vi hur fysiska användargränssnitt kan stötta social och fysisk interaktion. Studien applicerade en design-baserad metodologi som följde en iterativ,......, cyklisk process. Analysen visade att fysiska gränssnitt som främjar utforskande aktiviteter, verbala interaktioner och samarbete har en potential att erbjuda lekfulla lärande situationer som understödjer fria men också guidade aktiviteter....

  19. Kongehuset som varemærke og nationalt symbol

    DEFF Research Database (Denmark)

    Ravn Sørensen, Anders

    2016-01-01

    Kongehuset er ikke bare et nationalt symbol. Det er også et varemærke, som der er al mulig grund til at beskytte og vogte nidkært over. Kronen har nemlig god brandmæssig værdi.......Kongehuset er ikke bare et nationalt symbol. Det er også et varemærke, som der er al mulig grund til at beskytte og vogte nidkært over. Kronen har nemlig god brandmæssig værdi....

  20. Tangiplay: prototyping tangible electronic games

    OpenAIRE

    Boileau, Jason

    2010-01-01

    Tangible electronic games currently exist in research laboratories around the world but have yet to transition to the commercial sector. The development process of a tangible electronic game is one of the factors preventing progression, as it requires much time and money. Prototyping tools for tangible hardware and software development are becoming more available but are targeted to programmers and technically trained developers. Paper prototyping board and video games is a proven and rapid m...

  1. NIF/LMJ prototype amplifier mechanical design

    International Nuclear Information System (INIS)

    Horvath, J.

    1996-10-01

    Amplifier prototypes for the National Ignition Facility and the Laser Megajoule will be tested at Lawrence Livermore National Laboratory. The prototype amplifier, which is an ensemble of modules from LLNL and Centre d'Etudes de Limeil-Valenton, is cassette-based with bottom access for maintenance. A sealed maintenance transfer vehicle which moves optical cassettes between the amplifier and the assembly cleanroom, and a vacuum gripper which holds laser slabs during cassette assembly will also be tested. The prototype amplifier will be used to verify amplifier optical performance, thermal recovery time, and cleanliness of mechanical operations

  2. Validering som kommunikationsfärdighet till par där kvinnan har vaginism

    OpenAIRE

    Bernling, Marit; Munck af Rosenschöld, Lisa

    2009-01-01

    Vaginism är ett sexuellt problem som förekommer hos kvinnor och som i tidigare utvärderade behandlingar betraktats som kvinnans problem. Forskning inom området vaginism är begränsad och kunskap om parrelationens roll för vidmakthållandet av problematiken och upplevd relationstillfredsställelse saknas. Studiens syfte var att utforma en parbehandling där kommunikationsinterventionen validering lärs ut som färdighet, utforska om det fanns ett intresse för deltagande, samt utvärdera om behandling...

  3. Safety evaluation and bacterial community of kung-som using PCR-DGGE technique

    Directory of Open Access Journals (Sweden)

    Sutanate Saelao

    2016-08-01

    Full Text Available This study evaluates the safety of kung-som which was distributed in local markets and using PCR-DGGE technique to identify microflora in kung-som. Lactic acid bacteria (LAB were found at counts of more than 7 log CFU g-1 in all samples and the total viable counts were about 5-8 log CFU g-1 . Bacillus cereus and yeasts were detected at around 2 log CFU g-1 and 5-6log CFU g-1, respectively. For DGGE analysis, LAB and coagulase negative staphylococci (CNS bacteria dominated over other microorganisms. The sequencing of the DNA bands from DGGE gels corresponding to kung-som samples showed the presence of LAB as the major microflora in the products, namely: Lactobacillus farciminis, Lactobacillus plantarum, Lactococcus garvieae, Tetragenococcus halophilus and Weissella thailandensis. In addition, Staphylococcus carnosus was detected in kung-som as minor microflora. These dominant strains would allow the development of defined starter cultures for improving the quality of kung-som.

  4. E-tiviteter som eksamensform

    Directory of Open Access Journals (Sweden)

    Anette Grønning

    2011-12-01

    Full Text Available Med udgangspunkt i faget "Digital kommunikation på arbejde" præsenterer og diskuterer denne artikel en række anvendte digitale eksamensformer (e-tiviteter. E-tiviteterne er udarbejdet på baggrund af Gilly Salmons 5-fase-model og e-tivitetskoncept. Den anvendte e-læringsplatform er Blackboard, som de studerende og underviseren kender i forvejen. I artiklen præsenteres fagets e-tiviteter og undervisningsforløbet med e-tiviteter som eksamensform diskuteres. En række fordele og ulemper ved at veksle mellem offline- og online-aktiviteter (blended learning bliver behandlet. Det konkluderes, at de studerendes engagement og motivation kan øges ved at koble e-tiviteter sammen med eksamensformen "80% tilstedeværelse og aktiv deltagelse". Desuden fremhæves det, at aktivitetsniveauet mellem lektionerne og forberedelsesomfaget øges, ligesom de studerende motiveres til higher order thinking ved fx at tage ansvar for egen læring, udføre analyse og indgå i processen med kritisk refleksion. Endelig muliggør online-forløbet, at hele processen dokumenteres i faget til gavn for både underviser og studerende.

  5. Usage of virtual research laboratory "Climate" prototype for Northern Eurasia climatic and ecological studies

    Science.gov (United States)

    Gordov, Evgeny; Okladnikov, Igor; Titov, Alexander; Shulgina, Tamara

    2015-04-01

    Reported are some results of Northern Eurasia regional climatic and ecological monitoring and modeling obtained using recently developed prototype of thematic virtual research laboratory (VRL) Climate (http://climate.scert.ru/). The prototype integrates distributed thematic data storage, processing and analysis systems and set of models of complex climatic and environmental processes run on supercomputers. Its specific tools are aimed at high resolution rendering on-going climatic processes occurring in Northern Eurasia and reliable and found prognoses of their dynamics for selected sets of future mankind activity scenario. Currently VRL integrates on the base of geoportal the WRF and «Planet Simulator» models, basic reanalysis, meteorological stations data and support profound statistical analysis of storage and modeled on demand data. In particular, one can run the integrated models, preprocess modeling results data, using dedicated modules for numerical processing perform analysys and visualize obtained results. The prototype can provide specialists involved into multidisciplinary research projects with reliable and practical instruments for integrated research of climate and ecosystems changes on global and regional scales. With its help even a user without programming skills would be able to process and visualize multidimensional observational and model data through unified web-interface using a web-browser. Location, frequency and magnitude of observed in Siberia extremes has been studied using recently added prototype functionality allowing detailed statistical analysis studies of regional climatic extremes. Firstly it was shown that ECMWF ERA Interim Reanalysis data are closest to near surface temperature time series measured at regional meteorological stations. Statistical analysis of ERA Interim daily temperature time series (1979-2012) indicates the asymmetric changes in distribution tails of such extreme indices as warm/cold days/nights. Namely, the

  6. Medborgerskab som skolefag i Malaysia

    DEFF Research Database (Denmark)

    Tiemensma, Britt Due; Hald, Anne Mette

    2009-01-01

    Globalisering og internationalisering indgår med selvfølgelighed i uddannelsessektorens begrebsverden. Men hvad mener vi egentlig, når vi bruger begreberne? Benyttes de som abstrakte talemåder, for at vi skal kunne forholde os til uoverskueligheden i den aktuelle udvikling, eller kan begreberne k...

  7. Ole Rømer som enevældens administrator

    DEFF Research Database (Denmark)

    Olden-Jørgensen, Sebastian

    2004-01-01

    En biografisk skitse af Ole Rømers virke med vægt på hans rolle som embedsmand og rådgiver for Christian V. Hans virke analyseres på baggrund af en ny forståelse for den tidlige enevældes politiske kultur.......En biografisk skitse af Ole Rømers virke med vægt på hans rolle som embedsmand og rådgiver for Christian V. Hans virke analyseres på baggrund af en ny forståelse for den tidlige enevældes politiske kultur....

  8. Krisekommunikation som model for virksomhedsretorik?

    DEFF Research Database (Denmark)

    Rasmussen, Rasmus Kjærgaard

    2017-01-01

    kommunikativt konstitueret fænomener. Her argumenterer jeg for en analytisk syntese mellem framingteorier og det såkaldte CCO-paradigme, til sammen kan hjælpe krisekommunikationsteorierne med at slippe den aprioriske tilgang til kriser ved at forstå såvel kriser og organisationer som resultatet af kommunikative...

  9. Vehicle Development Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Supports the development of prototype deployment platform vehicles for offboard countermeasure systems.DESCRIPTION: The Vehicle Development Laboratory is...

  10. Identification of illicit drugs by using SOM neural networks

    Energy Technology Data Exchange (ETDEWEB)

    Liang Meiyan; Shen Jingling; Wang Guangqin [Beijing Key Lab for Terahertz Spectroscopy and Imaging, Key Laboratory of Terahertz Optoelectronics, Ministry of Education, Department of Physics, Capital Normal University, Beijing 100037 (China)], E-mail: liangyan661982@163.com, E-mail: jinglingshen@gmail.com, E-mail: pywgq2004@163.com

    2008-07-07

    Absorption spectra of six illicit drugs were measured by using the terahertz time-domain spectroscopy technique in the range 0.2-2.6 THz and then clustered with self-organization feature map (SOM) artificial neural network. After the network training process, the spectra collected at another time were identified successfully by the well-trained SOM network. An effective distance was introduced as a quantitative criterion to decide which cluster the new spectra were affiliated with.

  11. Identification of illicit drugs by using SOM neural networks

    International Nuclear Information System (INIS)

    Liang Meiyan; Shen Jingling; Wang Guangqin

    2008-01-01

    Absorption spectra of six illicit drugs were measured by using the terahertz time-domain spectroscopy technique in the range 0.2-2.6 THz and then clustered with self-organization feature map (SOM) artificial neural network. After the network training process, the spectra collected at another time were identified successfully by the well-trained SOM network. An effective distance was introduced as a quantitative criterion to decide which cluster the new spectra were affiliated with

  12. Modeling soil organic matter (SOM) from satellite data using VISNIR-SWIR spectroscopy and PLS regression with step-down variable selection algorithm: case study of Campos Amazonicos National Park savanna enclave, Brazil

    Science.gov (United States)

    Rosero-Vlasova, O.; Borini Alves, D.; Vlassova, L.; Perez-Cabello, F.; Montorio Lloveria, R.

    2017-10-01

    Deforestation in Amazon basin due, among other factors, to frequent wildfires demands continuous post-fire monitoring of soil and vegetation. Thus, the study posed two objectives: (1) evaluate the capacity of Visible - Near InfraRed - ShortWave InfraRed (VIS-NIR-SWIR) spectroscopy to estimate soil organic matter (SOM) in fire-affected soils, and (2) assess the feasibility of SOM mapping from satellite images. For this purpose, 30 soil samples (surface layer) were collected in 2016 in areas of grass and riparian vegetation of Campos Amazonicos National Park, Brazil, repeatedly affected by wildfires. Standard laboratory procedures were applied to determine SOM. Reflectance spectra of soils were obtained in controlled laboratory conditions using Fieldspec4 spectroradiometer (spectral range 350nm- 2500nm). Measured spectra were resampled to simulate reflectances for Landsat-8, Sentinel-2 and EnMap spectral bands, used as predictors in SOM models developed using Partial Least Squares regression and step-down variable selection algorithm (PLSR-SD). The best fit was achieved with models based on reflectances simulated for EnMap bands (R2=0.93; R2cv=0.82 and NMSE=0.07; NMSEcv=0.19). The model uses only 8 out of 244 predictors (bands) chosen by the step-down variable selection algorithm. The least reliable estimates (R2=0.55 and R2cv=0.40 and NMSE=0.43; NMSEcv=0.60) resulted from Landsat model, while Sentinel-2 model showed R2=0.68 and R2cv=0.63; NMSE=0.31 and NMSEcv=0.38. The results confirm high potential of VIS-NIR-SWIR spectroscopy for SOM estimation. Application of step-down produces sparser and better-fit models. Finally, SOM can be estimated with an acceptable accuracy (NMSE 0.35) from EnMap and Sentinel-2 data enabling mapping and analysis of impacts of repeated wildfires on soils in the study area.

  13. RK-TBA prototype RF source

    International Nuclear Information System (INIS)

    Houck, T.; Anderson, D.; Giordano, G.

    1996-01-01

    A prototype rf power source based on the Relativistic Klystron Two-Beam Accelerator (RK-TBA) concept is being constructed at the Lawrence Berkeley National Laboratory to study physics, engineering, and costing issues. The prototype is described and compared to a full scale design appropriate for driving the Next Linear Collider (NLC). Specific details of the induction core tests and pulsed power system are presented. The 1-MeV, 1.2-kA induction gun currently under construction is also described in detail

  14. Skønlitteraturen som opposition

    DEFF Research Database (Denmark)

    Larsen, Pelle Oliver

    2011-01-01

    Troels Troels-Lund er kendt som foregangsmanden i den første kulturhistoriske bølge i Danmark fra omkring 1880. Hans form for kulturhistorie vandt imidlertid aldrig for alvor faghistorikernes anerkendelse, og Troels-Lund blev udgrænset. Denne artikel går tilbage til 1870’erne og indeholder en ana...

  15. Med det sociale som designmateriale

    DEFF Research Database (Denmark)

    Brandt, Eva; Binder, Thomas

    2016-01-01

    Samarbejde, samskabelse og social nysgerrighed er i dag en præmis for den nyskabende designer. Det sociale er det nye designmateriale som unge designere giver sig i kast med når f.eks. Emmy Linde samarbejder med plejehjemsbeboere, deres pårørende, plejepersonale og fysioterapeuter for at designe ...

  16. Utholdenhetstrening i fotball: En analyse av smålagsspill brukt som utholdenhetstrening

    OpenAIRE

    Lorvik, Knut

    2013-01-01

    Utholdenhet er en fysisk egenskap som har betydning for fotballprestasjonen. Det viser flere studier. Helgerud (et al. 2001) fant signifikante forbedringer i forhold til flere fysiske mål som ble testet. Impellizzeri (et al. 2008) fant i sin studie at en forbedring i VO2max påvirket kortpasningsferdighetene positivt. I denne oppgaven har jeg fokusert på utholdenhetstrening i fotball og har to problemstillinger. Den første problemstillingen handler om hvilke studier som er gjort av utholde...

  17. Kina som stormagt i Arktis

    DEFF Research Database (Denmark)

    Nørup Sørensen, Camilla Tenna

    I slutningen af januar 2018 offentliggjorde Kina sin længe ventede Arktisstrategi. Den står som en foreløbig kulmination på de senere års udvikling af et mere selvsikkert, proaktivt og sofistikeret kinesisk diplomati i Arktis. Beijing har intensiveret bestræbelserne på at etablere stærke og...

  18. Electro-Deposition Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The electro-deposition laboratory can electro-deposit various coatings onto small test samples and bench level prototypes. This facility provides the foundation for...

  19. Fermi field and Dirac oscillator in a Som-Raychaudhuri space-time

    Science.gov (United States)

    de Montigny, Marc; Zare, Soroush; Hassanabadi, Hassan

    2018-05-01

    We investigate the relativistic dynamics of a Dirac field in the Som-Raychaudhuri space-time, which is described by a Gödel-type metric and a stationary cylindrical symmetric solution of Einstein field equations for a charged dust distribution in rigid rotation. In order to analyze the effect of various physical parameters of this space-time, we solve the Dirac equation in the Som-Raychaudhuri space-time and obtain the energy levels and eigenfunctions of the Dirac operator by using the Nikiforov-Uvarov method. We also examine the behaviour of the Dirac oscillator in the Som-Raychaudhuri space-time, in particular, the effect of its frequency and the vorticity parameter.

  20. Værdibasering som kommunal praksis

    DEFF Research Database (Denmark)

    Ostrowski, Kasper

    2009-01-01

    og tværkommunale forskelle foranlediget af kommunalreformen i Danmark. Begrebet ’værdibaseret ledelse’ gestaltes ofte med en både frustrerende lethed og på fascinerende vis som fænomen. Dette har ansporet min interesse for i denne afhandling at undersøge, hvorledes værdibaseret ledelse kan forstås...

  1. Sæbeopera som Forestillingsgenererende Teknologi

    DEFF Research Database (Denmark)

    Waltorp, Karen

    2013-01-01

    Gennem en række empiriske eksempler fra Mauretanien, Danmark og Sydafrika analyserer artiklen dramaserier på tv som en art social teknologi, der tillader infor- manterne at generere forestillinger om andre liv og andre verdener, der på én gang er langt væk og tæt på. 'Soap operas' produceret i USA...

  2. Feltarbejde som læringsrum

    DEFF Research Database (Denmark)

    Lund, Lisbeth Revsbæk

    2010-01-01

    artiklen beskrives, hvordan refleksionsrum og metakommunikative processer opleves af studerende, og hvilken betydning disse rum får for deres forståelse af såvel egne som uddannelsens læreprocesser. Artiklen er en del af en antologi, der tager sit udgangspunkt i de mange rum mellem uddannelse og profession......, databearbejdning, feltarbejde og teaching lab....

  3. EUSO-TA prototype telescope

    Energy Technology Data Exchange (ETDEWEB)

    Bisconti, Francesca, E-mail: francesca.bisconti@kit.edu

    2016-07-11

    EUSO-TA is one of the prototypes developed for the JEM-EUSO project, a space-based large field-of-view telescope to observe the fluorescence light emitted by cosmic ray air showers in the atmosphere. EUSO-TA is a ground-based prototype located at the Telescope Array (TA) site in Utah, USA, where an Electron Light Source and a Central Laser Facility are installed. The purpose of the EUSO-TA project is to calibrate the prototype with the TA fluorescence detector in presence of well-known light sources and cosmic ray air showers. In 2015, the detector started the first measurements and tests using the mentioned light sources have been performed successfully. A first cosmic ray candidate has been observed, as well as stars of different magnitude and color index. Since Silicon Photo-Multipliers (SiPMs) are very promising for fluorescence telescopes of next generation, they are under consideration for the realization of a new prototype of EUSO Photo Detector Module (PDM). The response of this sensor type is under investigation through simulations and laboratory experimentation.

  4. EUSO-TA prototype telescope

    Science.gov (United States)

    Bisconti, Francesca; JEM-EUSO Collaboration

    2016-07-01

    EUSO-TA is one of the prototypes developed for the JEM-EUSO project, a space-based large field-of-view telescope to observe the fluorescence light emitted by cosmic ray air showers in the atmosphere. EUSO-TA is a ground-based prototype located at the Telescope Array (TA) site in Utah, USA, where an Electron Light Source and a Central Laser Facility are installed. The purpose of the EUSO-TA project is to calibrate the prototype with the TA fluorescence detector in presence of well-known light sources and cosmic ray air showers. In 2015, the detector started the first measurements and tests using the mentioned light sources have been performed successfully. A first cosmic ray candidate has been observed, as well as stars of different magnitude and color index. Since Silicon Photo-Multipliers (SiPMs) are very promising for fluorescence telescopes of next generation, they are under consideration for the realization of a new prototype of EUSO Photo Detector Module (PDM). The response of this sensor type is under investigation through simulations and laboratory experimentation.

  5. Løgnene er ikke så nemme at huske som sandheden

    DEFF Research Database (Denmark)

    Bertelsen, Bettina

    2005-01-01

    Formålet med denne artikel er at belyse og diskutere, hvordan og hvorvidt prostituion kan forstås som et socialt problem. Dette vil jeg gøre gennem en teoretisk diskussion og analyse af prostitution som et socialt problem belyst ud fra konkrete projekterfaringer. Erfaringerne stammer dels fra...

  6. Machinima som kreativ praksis

    DEFF Research Database (Denmark)

    Frølunde, Lisbeth

    2014-01-01

    Video: Machinima som Kreativ Praksis. Videoen fortæller om de overordnede temaer i et forskningsprojekt der undersøgte nye former for online multimedie- og filmproduktion og fællesskaber med fokus på 'machinima' animation. Studiet af machinima var en del af et større dansk projekt og et nordisk f...... forskningprojekt om virtuelle verdener og teknologiudvikling, 2010-13. Videoen er præsenteret på Audiovisual Thinking nr. 7 under temaet: Den kreative økonomi....

  7. Aespoe Hard Rock Laboratory. Prototype Repository. Analyses of microorganisms, gases and water chemistry in buffer and backfill, 2009

    Energy Technology Data Exchange (ETDEWEB)

    Lydmark, Sara (Microbial Analytics Sweden AB (Sweden))

    2010-09-15

    The Prototype repository is an international project to build and study a full-scale model of the planned Swedish final repository for spent nuclear fuel. The Prototype repository differs from a real storage in that it is drained. For example, this makes the swelling pressure lower in the Prototype repository compared with a real storage. The project is being conducted at the Aespoe Hard Rock Laboratory (HRL) in crystalline rock at a depth of approximately 450 m. A monitoring programme is investigating the evolution of the water chemistry, gas, and microbial activity at the site, and one of the specific aims is to monitor the microbial consumption of oxygen in situ in the Prototype repository. This document describes the results of the analyses of microbes, gases, and chemistry inside and outside the Prototype in 2009. Hydrogen, helium, nitrogen, oxygen, carbon monoxide, carbon dioxide, methane, ethane, and ethene were analysed in the following sampling points in the Prototype repository: KBU10001, KBU10002, KBU10004, KBU10006, KBU10008, KFA01 and KFA04. Where the sampling points in the Prototype delivered pore water, the water was analysed for amount of ATP (i.e., the biovolume), cultivable heterotrophic aerobic bacteria (CHAB), sulphate-reducing bacteria (SRB), methane-oxidizing bacteria (MOB), autotrophic acetogens (AA) and in some cases iron-reducing bacteria (IRB). Cultivation methods were also compared with qPCR molecular techniques to evaluate these before next year's decommission of the Prototype repository. The collected pore water from the Prototype repository was subject to chemistry analysis (as many analyses were conducted as the amount of water allowed). In addition, groundwater from two borehole sections in the rock surrounding the Prototype was analysed regarding its gas composition, microbiology and redox. Chemistry data from a previous investigation of the groundwater outside the Prototype repository were compared with the pore water

  8. Aespoe Hard Rock Laboratory. Prototype Repository. Analyses of microorganisms, gases and water chemistry in buffer and backfill, 2009

    International Nuclear Information System (INIS)

    Lydmark, Sara

    2010-09-01

    The Prototype repository is an international project to build and study a full-scale model of the planned Swedish final repository for spent nuclear fuel. The Prototype repository differs from a real storage in that it is drained. For example, this makes the swelling pressure lower in the Prototype repository compared with a real storage. The project is being conducted at the Aespoe Hard Rock Laboratory (HRL) in crystalline rock at a depth of approximately 450 m. A monitoring programme is investigating the evolution of the water chemistry, gas, and microbial activity at the site, and one of the specific aims is to monitor the microbial consumption of oxygen in situ in the Prototype repository. This document describes the results of the analyses of microbes, gases, and chemistry inside and outside the Prototype in 2009. Hydrogen, helium, nitrogen, oxygen, carbon monoxide, carbon dioxide, methane, ethane, and ethene were analysed in the following sampling points in the Prototype repository: KBU10001, KBU10002, KBU10004, KBU10006, KBU10008, KFA01 and KFA04. Where the sampling points in the Prototype delivered pore water, the water was analysed for amount of ATP (i.e., the biovolume), cultivable heterotrophic aerobic bacteria (CHAB), sulphate-reducing bacteria (SRB), methane-oxidizing bacteria (MOB), autotrophic acetogens (AA) and in some cases iron-reducing bacteria (IRB). Cultivation methods were also compared with qPCR molecular techniques to evaluate these before next year's decommission of the Prototype repository. The collected pore water from the Prototype repository was subject to chemistry analysis (as many analyses were conducted as the amount of water allowed). In addition, groundwater from two borehole sections in the rock surrounding the Prototype was analysed regarding its gas composition, microbiology and redox. Chemistry data from a previous investigation of the groundwater outside the Prototype repository were compared with the pore water chemistry

  9. Defense Waste Processing Facility prototypic analytical laboratory

    International Nuclear Information System (INIS)

    Policke, T.A.; Bryant, M.F.; Spencer, R.B.

    1991-01-01

    The Defense Waste Processing Technology (DWPT) Analytical Laboratory is a relatively new laboratory facility at the Savannah River Site (SRS). It is a non-regulated, non-radioactive laboratory whose mission is to support research and development (R ampersand D) and waste treatment operations by providing analytical and experimental services in a way that is safe, efficient, and produces quality results in a timely manner so that R ampersand D personnel can provide quality technical data and operations personnel can efficiently operate waste treatment facilities. The modules are sample receiving, chromatography I, chromatography II, wet chemistry and carbon, sample preparation, and spectroscopy

  10. [Study on mechanism of SOM stabilization of paddy soils under long-term fertilizations].

    Science.gov (United States)

    Luo, Lu; Zhou, Ping; Tong, Cheng-Li; Shi, Hui; Wu, Jin-Shui; Huang, Tie-Ping

    2013-02-01

    Fourier transform infrared spectroscopy (FTIR) was applied to study the structure of soil organic matter (SOM) of paddy soils under long-term different fertilization treatments. The aim was to clarify the different distribution of SOM between different fertilization methods and between topsoil and subsoil, and to explore the stability mechanism of SOM under different fertilization treatments. The results showed that the content of topsoil organic carbon (SOC) was the highest under organic-inorganic fertilizations, with the increment of SOC by 18.5%, 12.9% and 18.4% under high organic manure (HOM), low organic manure (LOM) and straw returning (STW) respectively compared with no fertilization treatment (CK). The long-term fertilizations also changed the chemical structure of SOM. As compared with CK, different fertilization treatments increased the functional group absorbing intensity of chemical resistance compounds (aliphatic, aromaticity), carbohydrate and organo-silicon compounds, which was the most distinctive under treatments of HOM, LOM and STW. For example, the absorbing intensity of alkyl was 0.30, 0.25 and 0.29 under HOM, LOM and STW, respectively. These values were increased by 87% , 56% and 81% as compared with that under CK treatment. The functional group absorbing intensity of SOM in the topsoil was stronger than that in the subsoil, with the most distinctive difference under HOM, LOM and STW treatments. The present research indicated that the enhanced chemical resistance of functional group of SOM may contribute to the high contents of SOC in the paddy soils under long-term organic-inorganic fertilizations, which also suggested a chemical stabilization mechanism of SOM in the paddy soils.

  11. Laboratory prototype for experimental validation of MR-guided radiofrequency head and neck hyperthermia

    Science.gov (United States)

    Paulides, M. M.; Bakker, J. F.; Hofstetter, L. W.; Numan, W. C. M.; Pellicer, R.; Fiveland, E. W.; Tarasek, M.; Houston, G. C.; van Rhoon, G. C.; Yeo, D. T. B.; Kotek, G.

    2014-05-01

    Clinical studies have established a strong benefit from adjuvant mild hyperthermia (HT) to radio- and chemotherapy for many tumor sites, including the head and neck (H&N). The recently developed HYPERcollar allows the application of local radiofrequency HT to tumors in the entire H&N. Treatment quality is optimized using electromagnetic and thermal simulators and, whenever placement risk is tolerable, assessed using invasively placed thermometers. To replace the current invasive procedure, we are investigating whether magnetic resonance (MR) thermometry can be exploited for continuous and 3D thermal dose assessment. In this work, we used our simulation tools to design an MR compatible laboratory prototype applicator. By simulations and measurements, we showed that the redesigned patch antennas are well matched to 50 Ω (S11<-10 dB). Simulations also show that, using 300 W input power, a maximum specific absorption rate (SAR) of 100 W kg-1 and a temperature increase of 4.5 °C in 6 min is feasible at the center of a cylindrical fat/muscle phantom. Temperature measurements using the MR scanner confirmed the focused heating capabilities and MR compatibility of the setup. We conclude that the laboratory applicator provides the possibility for experimental assessment of the feasibility of hybrid MR-HT in the H&N region. This versatile design allows rigorous analysis of MR thermometry accuracy in increasingly complex phantoms that mimic patients' anatomies and thermodynamic characteristics.

  12. Supply Chain Management som interaktionel praksis

    DEFF Research Database (Denmark)

    Smith, Leo Feddersen; Lund, Anders

    2016-01-01

    I dette bidrag undersøger vi Supply Chain Management som en interaktionel praksis forankret i kommunikation. Med udgangspunkt i e-mail korrespondancer undersøger vi, hvordan køber-leverandør forholdet kommunikativt konstitueres mellem to danske SMVer og deres kinesiske leverandører. Det...

  13. Får - ett miljövänligt alternativ som ogräsbekämpning

    DEFF Research Database (Denmark)

    Jensen, Anne Mette Dahl; Sintorn, Kim

    2010-01-01

    Erfarenhetsutbyte omkring fårbete som ogräsbekämpning var bland annat på dagordningen då svenska och danska greenkeepers som helt eller delvis sköter sina banor pesticidfritt möttes på Furesö Golfklubb den 4 maj i år.......Erfarenhetsutbyte omkring fårbete som ogräsbekämpning var bland annat på dagordningen då svenska och danska greenkeepers som helt eller delvis sköter sina banor pesticidfritt möttes på Furesö Golfklubb den 4 maj i år....

  14. Perception som forståelsens grundlag

    DEFF Research Database (Denmark)

    Nielsen, Charlotte Marie Bisgaard

    2005-01-01

    sprogpsykologisk som sense-making procedurer. Perception har ifølge William James at gøre med personers forståelser. Monets katedralmalerier fra Rouen og Cézannes billeder fra Aix-en Provence samt hans Selvportræt med Bowlerhat (Ny Carlsberg Glyptotek) sammenholdes med Merleau-Pontys Perceptionens Primat og...

  15. Massemedier som forum for politisk debat

    DEFF Research Database (Denmark)

    Laursen, Bo; Trapp, Leila

    2015-01-01

    Ifølge normative teorier om politisk offentlighed og demokrati bør der i deliberative demokratier som det danske foregå en bred offentlig debat, inden politikere træffer beslutninger. Debatten, der i dagens Danmark hovedsagelig foregår i massemedierne, skal blandt andet sikre, at alle synspunkter...

  16. Modelling bare fallow SOM dynamics on a Chernozem soil in Central Germany

    Science.gov (United States)

    Franko, Uwe; Merbach, Ines

    2017-04-01

    The level of our process understanding about carbon and nitrogen fluxes in soils becomes visible at extreme situations like bare fallow soils. The observed dynamics of soil organic carbon (SOC) and total nitrogen (TN) in the top soil on a 28 years old fallow experiment on Haplic Chernozem in Bad Lauchstädt (Germany) was modelled using the Candy Carbon Balance (CCB) model that in its standard version was previously validated with LTFE data from Central Europe and a tillage experiment in Austria. For this study we selected two treatments of the fallow experiment in Bad Lauchstädt where the soil was kept bare with mechanical or chemical treatments. For this extreme land use (no input of fresh organic matter) the CCB model was improved to include the SOC related change of soil physical parameters and a dynamic handling of the physically stabilized soil organic matter (SOM) pool. The results from observation and modelling reflected the increased SOM turnover due to soil tillage for carbon as well as nitrogen and thus confirmed the modelling approach for non-tillage in CCB. The added sub model for the dynamics of physically stabilized SOM was also verified. The long term stabilized SOM is very important on this site. The modelled size of the physically stabilized SOC pool was about 55% of total SOC and reduced only slowly during the nearly three decades but the implementation of this effect resulted in improved simulation results. Thus we conclude that scenarios that lead to bigger changes of SOM stocks require a modelling approach that acknowledges the interaction between SOM and soil physical properties.

  17. Orbitrap mass analyser for in situ characterisation of planetary environments: Performance evaluation of a laboratory prototype

    Science.gov (United States)

    Briois, Christelle; Thissen, Roland; Thirkell, Laurent; Aradj, Kenzi; Bouabdellah, Abdel; Boukrara, Amirouche; Carrasco, Nathalie; Chalumeau, Gilles; Chapelon, Olivier; Colin, Fabrice; Coll, Patrice; Cottin, Hervé; Engrand, Cécile; Grand, Noel; Lebreton, Jean-Pierre; Orthous-Daunay, François-Régis; Pennanech, Cyril; Szopa, Cyril; Vuitton, Véronique; Zapf, Pascal; Makarov, Alexander

    2016-10-01

    For decades of space exploration, mass spectrometry has proven to be a reliable instrumentation for the characterisation of the nature and energy of ionic and neutral, atomic and molecular species in the interplanetary medium and upper planetary atmospheres. It has been used as well to analyse the chemical composition of planetary and small bodies environments. The chemical complexity of these environments calls for the need to develop a new generation of mass spectrometers with significantly increased mass resolving power. The recently developed OrbitrapTM mass analyser at ultra-high resolution shows promising adaptability to space instrumentation, offering improved performances for in situ measurements. In this article, we report on our project named ;Cosmorbitrap; aiming at demonstrating the adaptability of the Orbitrap technology for in situ space exploration. We present the prototype that was developed in the laboratory for demonstration of both technical feasibility and analytical capabilities. A set of samples containing elements with masses ranging from 9 to 208 u has been used to evaluate the performance of the analyser, in terms of mass resolving power (reaching 474,000 at m/z 9) and ability to discriminate between isobaric interferences, accuracy of mass measurement (below 15 ppm) and determination of relative isotopic abundances (below 5%) of various samples. We observe a good agreement between the results obtained with the prototype and those of a commercial instrument. As the background pressure is a key parameter for in situ exploration of atmosphere planetary bodies, we study the effect of background gas on the performance of the Cosmorbitrap prototype, showing an upper limit for N2 in our set-up at 10-8 mbar. The results demonstrate the strong potential to adapt this technology to space exploration.

  18. Mindfulness som smertehåndteringsredskab for kvinder med endometriose

    DEFF Research Database (Denmark)

    Jensen, Mette Kold; Vedsted-Hansen, Hanne; Hansen, Tia G. B.

    2011-01-01

    Endometriose er en kronisk underlivssygdom med smerter og en række afledte problemer, som ikke nødvendigvis kan behandles med lægelige tiltag. Artiklen argumenterer for, at en mindfulness-baseret tilgang med fokus på smertehåndtering kan anvendes til denne klientgruppe. I vestlig terapeutisk...... sammenhæng kan mindfulness karakteriseres som nærvær, observation og beskrivelse af sansninger uden vurdering eller reaktion. Mindfulness-træning har effekt mod andre typer stress og kroniske smerter, og artiklen opridser et koncept til anvendelse ved endometriose. Konceptet belyses med en case, hvor...

  19. Prototype prosperity-diversity game for the Laboratory Development Division of Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    VanDevender, P.; Berman, M.; Savage, K.

    1996-02-01

    The Prosperity Game conducted for the Laboratory Development Division of National Laboratories on May 24--25, 1995, focused on the individual and organizational autonomy plaguing the Department of Energy (DOE)-Congress-Laboratories` ability to manage the wrenching change of declining budgets. Prosperity Games are an outgrowth and adaptation of move/countermove and seminar War Games. Each Prosperity Game is unique in that both the game format and the player contributions vary from game to game. This particular Prosperity Game was played by volunteers from Sandia National Laboratories, Eastman Kodak, IBM, and AT&T. Since the participants fully control the content of the games, the specific outcomes will be different when the team for each laboratory, Congress, DOE, and the Laboratory Operating Board (now Laboratory Operations Board) is composed of executives from those respective organizations. Nevertheless, the strategies and implementing agreements suggest that the Prosperity Games stimulate cooperative behaviors and may permit the executives of the institutions to safely explore the consequences of a family of DOE concert.

  20. Brands som brikker i konstruktionen af identitet

    DEFF Research Database (Denmark)

    Hermansen, Judy

    2008-01-01

    Forbrug spiller en vigtig rolle i produktionen af mening og værdier, som kan skabe og vedligeholde både forbrugerens personlige og sociale verden - og derfor er reklame også en vigtig kilde til disse symbolske betydninger. Udgivelsesdato: juni...

  1. Norcal Prototype LNG Truck Fleet: Final Results

    Energy Technology Data Exchange (ETDEWEB)

    2004-07-01

    U.S. DOE and National Renewable Energy Laboratory evaluated Norcal Waste Systems liquefied natural gas (LNG) waste transfer trucks. Trucks had prototype Cummins Westport ISXG engines. Report gives final evaluation results.

  2. Aespoe Hard Rock Laboratory. Prototype repository. Analyses of microorganisms, gases, and water chemistry in buffer and backfill, 2010

    International Nuclear Information System (INIS)

    Lydmark, Sara

    2011-06-01

    The prototype repository (hereafter, 'Prototype') is an international project to build and study a fullscale model of the planned Swedish final repository for spent nuclear fuel. However, the Prototype differs from a real storage in that it is drained, which makes the swelling pressure lower in the Prototype than in a real storage facility. The heat from the radioactive decay is simulated by electrical heaters. The project is being conducted at the Aespoe Hard Rock Laboratory (HRL) in crystalline rock at a depth of approximately 450 m. A monitoring programme is investigating the evolution of the water chemistry, gas, and microbial activity at the site, and a specific aim is to monitor the microbial consumption of oxygen in situ in the Prototype. This document describes the results of the analyses of microbes, gases, and chemistry inside the Prototype in 2010. Hydrogen, helium, nitrogen, oxygen, carbon monoxide, carbon dioxide, methane, ethane, and ethene were analysed at the following sampling points in the Prototype: KBU10001, KBU10002, KBU10004, KBU10008, and KFA04. Where the sampling points in the Prototype delivered pore water, the water was analysed for amount of ATP (i.e. the biovolume), culturable heterotrophic aerobic bacteria (CHAB), sulphate-reducing bacteria (SRB), methane-oxidizing bacteria (MOB), and iron-reducing bacteria (IRB). The pore water collected from the Prototype was subject to as many chemical analyses as the amount of water allowed. Chemical analyses were also performed on pore water from two additional sampling points, KBU10005 and KBU10006. Chemical data from a previous investigation of the groundwater outside the Prototype were compared with the pore water chemistry. The improved sampling and analysis protocols introduced in 2007 worked very well. The International Progress Report (IPR) 08-01 (Eriksson 2008) revealed that many of the hydrochemical sampling points differ greatly from each other. The 16 sampling points were therefore

  3. Aespoe Hard Rock Laboratory. Prototype repository. Analyses of microorganisms, gases, and water chemistry in buffer and backfill, 2010

    Energy Technology Data Exchange (ETDEWEB)

    Lydmark, Sara [Microbial Analytics Sweden AB, Moelnlycke (Sweden)

    2011-06-15

    The prototype repository (hereafter, 'Prototype') is an international project to build and study a fullscale model of the planned Swedish final repository for spent nuclear fuel. However, the Prototype differs from a real storage in that it is drained, which makes the swelling pressure lower in the Prototype than in a real storage facility. The heat from the radioactive decay is simulated by electrical heaters. The project is being conducted at the Aespoe Hard Rock Laboratory (HRL) in crystalline rock at a depth of approximately 450 m. A monitoring programme is investigating the evolution of the water chemistry, gas, and microbial activity at the site, and a specific aim is to monitor the microbial consumption of oxygen in situ in the Prototype. This document describes the results of the analyses of microbes, gases, and chemistry inside the Prototype in 2010. Hydrogen, helium, nitrogen, oxygen, carbon monoxide, carbon dioxide, methane, ethane, and ethene were analysed at the following sampling points in the Prototype: KBU10001, KBU10002, KBU10004, KBU10008, and KFA04. Where the sampling points in the Prototype delivered pore water, the water was analysed for amount of ATP (i.e. the biovolume), culturable heterotrophic aerobic bacteria (CHAB), sulphate-reducing bacteria (SRB), methane-oxidizing bacteria (MOB), and iron-reducing bacteria (IRB). The pore water collected from the Prototype was subject to as many chemical analyses as the amount of water allowed. Chemical analyses were also performed on pore water from two additional sampling points, KBU10005 and KBU10006. Chemical data from a previous investigation of the groundwater outside the Prototype were compared with the pore water chemistry. The improved sampling and analysis protocols introduced in 2007 worked very well. The International Progress Report (IPR) 08-01 (Eriksson 2008) revealed that many of the hydrochemical sampling points differ greatly from each other. The 16 sampling points were

  4. Djævelen som Guds advokat - Nietzsche, filosofien og Paulus

    DEFF Research Database (Denmark)

    Pallesen, Carsten

    2012-01-01

    Artiklen tegner et dobbeltportræt af Paulus og Nietzsche ud fra en række nyere diskussioner om Nietzsches syn på Paulus hos aktuelle Nietzscheforskere, men også med udblik til den Paulus-renæssance, som har fundet sted i filosofien. Med det sidste tænkes navnlig på den franske filosof Alain Badious...... tese om Paulus som universalismens tænker. Artiklen fremhæver, hvordan hermeneutiske, kommunikationsteoretiske og semiotiske tilgange i den nyere tyske forskning navnlig hos Werner Stegmaier har ændret synet på forholdet mellem Nietzsches ’tegn’ (Dionysos, Zarathustra, ’anti-krist’) over for Nietzsches...... retfærdiggørelse ved troen. Nietzsches forhold til kristendommen er ikke kun bestemt af negative vurderinger, men tillige af en ambivalent taknemmelighed, som når han i den sene fase af forfatterskabet på en gang identificerer sig med Dionysos og ’den korsfæstede’....

  5. FLEXIBLE FOOD PACKAGING LABORATORY

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory contains equipment to fabricate and test prototype packages of many types and sizes (e.g., bags, pouches, trays, cartons, etc.). This equipment can...

  6. Symptom-specific course trajectories and their determinants in primary care patients with Major Depressive Disorder: Evidence for two etiologically distinct prototypes.

    Science.gov (United States)

    Wardenaar, K J; Monden, R; Conradi, H J; de Jonge, P

    2015-07-01

    The course-heterogeneity of Major Depressive Disorder (MDD) hampers development of better prognostic models. Although latent class growth analyses (LCGA) have been used to explain course-heterogeneity, such analyses have failed to also account for symptom-heterogeneity of depressive symptoms. Therefore, the aim was to identify more specific data-driven subgroups based on patterns of course-trajectories on different depressive symptom domains. In primary care MDD patients (n=205), the presence of the MDD criterion symptoms was determined for each week during a year. Weekly 'mood/cognition' (MC) and 'somatic' (SOM) scores were computed and parallel processes-LCGA (PP-LCGA) was used to identify subgroups based on the course on these domains. The classes׳ associations with baseline predictors and 2-/3-year outcomes were investigated. PP-LCGA identified four classes: quick recovery, persisting SOM, persisting MC, and persisting SOM+MC (chronic). Persisting SOM was specifically predicted by higher baseline somatic symptomatology and somatization, and was associated with more somatic depressive symptomatology at long-term follow-up. Persisting MC was specifically predicted by higher depressive severity, thinking insufficiencies, neuroticism, loneliness and lower self-esteem, and was associated with lower mental health related quality of life and more mood/cognitive depressive symptomatology at follow-up. The sample was small and contained only primary care MDD patients. The weekly depression assessments were collected retrospectively at 3-month intervals. The results indicate that there are two specific prototypes of depression, characterized by either persisting MC or persisting SOM, which have different sets of associated prognostic factors and long-term outcomes, and could have different etiological mechanisms. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. "Vi har ikke noget at sige, men vi gør det så koncentreret som muligt"

    DEFF Research Database (Denmark)

    Hansen, Kamma Overgaard

    mellemposition mellem på den ene side Arthur C. Dantos udråbelse af postmodernismen som The End of Art og Fredric Jamesons kritiske udlægning af den postmoderne kunst som simulerende og hans begrædelse af en tabt autenticitet - og på den anden side Linda Hutcheons langt mere positive definering af det...... postmoderne som ironisk og parodisk og dermed nytænkende og metareflekterende. Herudfra karakteriserer jeg De Unge Vilde som ironikere ud fra Søren Kierkegaards karakteristisk af ironikeren som en mellemfase mellem det æstetiske og det etiske livsstadie. Videre argumenterer jeg for, at Dantos ’end of art...

  8. Evaluation of prototype electrofibrous filters for nuclear ventilation ducts

    International Nuclear Information System (INIS)

    Bergman, W.; Kuhl, W.D.; Biermann, A.H.; Johnson, J.S.; Lum, B.Y.

    1983-01-01

    Two prototype electrofibrous filters were designed, built and evaluated in laboratory tests and in field installations. These prototypes were designed for use in nuclear ventilation ducts as prefilters to HEPA filters. One prototype is designed to be a permanent component of the ventilation system while the other is a disposable unit. The disposable electrofibrous prefilter was installed in the exhaust stream of a glove box in which barrels of uranium turnings are burned. Preliminary tests show the disposable prefilter is effectively prolonging the HEPA filter life

  9. Evaluation of prototype electrofibrous filters for nuclear-ventilation ducts

    International Nuclear Information System (INIS)

    Bergman, W.; Kuhl, W.D.; Biermann, A.H.; Johnson, J.S.; Lum, B.Y.

    1982-01-01

    Two prototypes electrofibrous filters were designed, built and evaluated in laboratory tests and in field installations. These prototypes were designed for use in nuclear ventilation ducts as prefilters to HEPA filters. One prototype is designed to be a permanent component of the ventilation system while the other is a disposable unit. The disposable electrofibrous prefilter was installed in the exhaust stream of a glove box in which barrels of uranium turnings are burned. Preliminary tests show the disposable prefilter is effectively prolonging the HEPA filter life

  10. Aespoe Hard Rock Laboratory. Prototype Repository. Acoustic emission and ultrasonic monitoring results from deposition hole DA3545G01 in the Prototype Repository between October 2007 and March 2008

    Energy Technology Data Exchange (ETDEWEB)

    Duckworth, D.; Haycox, J.; Pettitt, W.S. (Applied Seismology Consultants, Shrewsbury (United Kingdom))

    2008-12-15

    This report describes results from acoustic emission (AE) and ultrasonic monitoring around a canister deposition hole (DA3545G01) in the Prototype Repository Experiment at SKB's Hard Rock Laboratory (HRL), Sweden. The experiment has been designed to simulate a disposal tunnel in a real deep repository environment for storage of high-level radioactive waste. The test consists of a 90 m long, 5 m diameter subhorizontal tunnel excavated in dioritic granite. The monitoring aims to examine changes in the rock mass caused by an experimental repository environment, in particular due to thermal stresses induced from canister heating and pore pressures induced from tunnel sealing.

  11. Aespoe Hard Rock Laboratory. Prototype Repository. Acoustic emission and ultrasonic monitoring results from deposition hole DA3545G01 in the Prototype Repository between October 2007 and March 2008

    International Nuclear Information System (INIS)

    Duckworth, D.; Haycox, J.; Pettitt, W.S.

    2008-12-01

    This report describes results from acoustic emission (AE) and ultrasonic monitoring around a canister deposition hole (DA3545G01) in the Prototype Repository Experiment at SKB's Hard Rock Laboratory (HRL), Sweden. The experiment has been designed to simulate a disposal tunnel in a real deep repository environment for storage of high-level radioactive waste. The test consists of a 90 m long, 5 m diameter subhorizontal tunnel excavated in dioritic granite. The monitoring aims to examine changes in the rock mass caused by an experimental repository environment, in particular due to thermal stresses induced from canister heating and pore pressures induced from tunnel sealing

  12. From poverty to power? Brasiliansk sosialpolitikk som soft power-ressurs

    OpenAIRE

    Flatjord, Inger-Marie

    2015-01-01

    Grunnet markant fattigdomsreduksjon det siste tiåret, har Brasil gått fra å være det klassiske eksemplet på et land med stor fattigdom og enorme sosiale forskjeller, til å innta en posisjon som foregangsland i den globale utviklingsdiskursen. Landets sosialpolitikk har høstet annerkjennelse fra både FN og Verdensbanken, og Brasil opplever en stor etterspørsel fra utviklingsland som vil lære av landets sosialpolitiske erfaringer. I lys av dette har jeg i denne oppgaven analysert hvordan landet...

  13. Djur som en del i omvårdnad : En litteraturstudie

    OpenAIRE

    Jirback, Fia; Olsson, Malin

    2011-01-01

    Bakgrund: Äldre på boende idag kan känna att de saknar sociala interaktioner med vårdpersonal, familj eller vänner. För att uppleva god livskvalitet krävs bland annat trygghet, sociala interaktioner och aktiviteter. Djur kan användas som behandlingsmetod i vården i form av Animal-Assisted Activity (AAA) och Animal-Assisted Therapy (AAT). Syfte: Syftet med litteraturstudien var att belysa sällskapsdjurs betydelse för äldres livskvalitet på äldreboende. Metod: Studien har genomförts som en allm...

  14. Time travel in the homogeneous Som-Raychaudhuri Universe

    International Nuclear Information System (INIS)

    Paiva, F.M.; Reboucas, M.J.; Teixeira, A.F.F.

    1987-01-01

    Properties of the rotating Som-Raychaudhuri homogeneous space-time are investigated: time-like and null geodesics, causality features, horizons and invariant characterization. An integral representation of its five isometries is also discussed. (author) [pt

  15. Historiens Mening som et Kreativt Produkt - En Analyse av Camille Paglias "The Birth of the Western Eye"

    OpenAIRE

    Kyllingstad, Elisabeth

    2016-01-01

    Dette prosjektet er en metodisk tilnærming til Camille Paglias filosofiske historietekst ”The Birth of the Western Eye”. Sexual Personae – Art and Decadence from Nefertiti to Emily Dickinson (1991) er en revidert versjon av doktorgradsavhendlingen hennes, som hun forsvarte i 1974. Den forteller om det Paglia identifiserer som grunnleggende drivkrefter i det vestlige mennesket, og dets kunstneriske produksjon. På denne måten kan verket leses som en guide gjennom vestlig tenkning så vel som kun...

  16. Snehvides Billede som virkelighedsteater

    DEFF Research Database (Denmark)

    Krøgholt, Ida

    2015-01-01

    nyere affektforskning, der er rettet mod kunstens henvendelsesformer og virkninger (bl.a. Massumi og Deleuze), markeres der en interesseforskydning fra følelse til affekt. Det får den konsekvens, at forklaringer på hvordan kunst fungerer og virker ikke søges i tilskuerens følelsesregistreringer men...... affektive henvendelsesform, henter jeg inspiration i aktør-netværks teorien (Latour) og denne teoris materialitets- og tingsbegreb. Den kølige form for virkelighedsteater, som Snehvides Billede repræsenterer, vil ikke vække tilskuerens trang til at gribe ind i virkeligheden. Den vil snarere, via affekt...

  17. Hvordan ser den ost ud, som De ikke ved, De vil elske om to år?

    DEFF Research Database (Denmark)

    Grunert, Klaus G.

    2006-01-01

    Kender de Deres "latente behov"? Det gør De selvfølgelig ikke. Det er jo definitionen af begrebet: Et latent behov er et behov, som man ikke ved, at man har, men som kommer til overfladen, når man møder det rigtige produkt, som opfylder netop dette behov. Latente behov vedrører derfor den ost, vi...

  18. Med sjefen på Facebook: En studie av ledere som er "venner" med sine ansatte

    OpenAIRE

    Jensen, Anita

    2014-01-01

    MR690 Masteroppgave i organisasjon og ledelse - utdanningsledelse Formålet med studien er å belyse hvordan aktiv bruk av sosiale medier, i dette tilfellet Facebook, påvirker relasjoner mellom mennesker. Hva skjer når en tar i bruk en websjanger som i utgangspunktet er umiddelbar og uformell, til jobbrelatert og mer formell kommunikasjon? Er det sjangeren eller relasjonen som endres? Søkelyset rettes mot ledere som er “venner” med sine medarbeidere, og problemstillingen er...

  19. Filosofisk terapi som træning til døden

    DEFF Research Database (Denmark)

    Dræby, Anders

    Den eksistentielfænomenologiske terapi deler den opfattelse med stoicismen, at filosofiens hovedopgave er at hjælpe mennesket med at finde vej i en problematisk verden. Oplægget udforsker desuden et overlap, som består i den indsigt, at terapeutisk udfrielse fra menneskelig lidelse til livsduelig......Den eksistentielfænomenologiske terapi deler den opfattelse med stoicismen, at filosofiens hovedopgave er at hjælpe mennesket med at finde vej i en problematisk verden. Oplægget udforsker desuden et overlap, som består i den indsigt, at terapeutisk udfrielse fra menneskelig lidelse til...

  20. Forholdet mellem public relations og marketing som ledelsesfunktioner

    Directory of Open Access Journals (Sweden)

    James E. Grunig

    1993-09-01

    Full Text Available I forsommeren 1993 tildelte Dansk Public Relations Forening årets PR- pris til mesterkommunikatøren Lars Larsen, Jysk Sengetøjslager/Larsen Rejser. I motiveringen hedder det, at Lars Larsen hædres for "en prisvær- dig Public Relations indsats, der kan motivere til en øget anvendelse af Public Relations i den danske forretningsverden". Blandt PR-foreningens medlemmer vakte pristildelingen en vis furore; et indlæg i foreningens blad PRspektiv invendte, at Lars Larsen driver "publicity" (dvs. et reklame- værktøj - "Præcis den slags PR, som vi i mange år har arbejdet på at distancere Public Relation-begrebet fra". Lars Larsen selv sagde, at han slet ikke skelner mellem Public Relations, PR og markedsføring. Et andet indlæg i bladet argumenterede for, at det ikke længere giver mening at adskille begreberne Public Relations og markedsføring, fordi grænsen mellem det offentlige og det private ude i virkeligheden er mere og mere flydende. James Grunigs artikel, der søger at afklare forholdet mellem PR og marketing teoretisk og praktisk, er derfor brændende aktuelt, ikke mindst for PR-fagets bestræbelser på at blive anerkendt som en respek- tabel profession. Den blev præsenteret som foredrag under Grunigs Dan- marksbesøg i marts 1993, er redigeret af Kim Schrøder og oversat fra engelsk af Kenja Henriksen.

  1. Rousseau som modsvar til forceret talentudvikling

    DEFF Research Database (Denmark)

    Holm, Claus; Nielsen, Jens Christian

    2015-01-01

    pædagogisk syn på børn og unges udvikling. Men dette syn er nu under pres. Det kommer for eksempel til udtryk, når en international idrætsaktør som FC Barcelona vil oprette elitært orienterede fodboldakademier for børn ned til 6-årsalderen i Danmark. Men inspireret af filosoffen Jean-Jacques Rousseau og...

  2. Laboratory for Large Data Research

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: The Laboratory for Large Data Research (LDR) addresses a critical need to rapidly prototype shared, unified access to large amounts of data across both the...

  3. Evaluation of a Prototype Low-Cost, Modular, Wireless Electroencephalography (EEG) Headset Design for Widespread Application

    Science.gov (United States)

    2016-06-01

    therefore did not implement or test actual sensors or electronic components (analog-to-digital conversion, power , and the wireless transmission ...ARL-TR-7703 ● JUNE 2016 US Army Research Laboratory Evaluation of a Prototype Low-Cost, Modular, Wireless Electroencephalography...originator. ARL-TR-7703 ● JUNE 2016 US Army Research Laboratory Evaluation of a Prototype Low-Cost, Modular, Wireless

  4. Livsvalg konceptualiseret som dynamisk realisering af livsbaner

    DEFF Research Database (Denmark)

    Schnieber, Anette

    2009-01-01

    De valgsituationer, man i daglig tale kender som ”tilværelsens store valg”, mangler definition i den psykologiske litteratur, og det er således ikke klart, hvorvidt og evt. hvorledes disse valg adskiller sig fra andre typer. I artiklen gives en definition af ”de store valg”, og de adskilles fra...

  5. Læring som improviseret udvikling af praksis

    DEFF Research Database (Denmark)

    Brinck, Lars

    2010-01-01

    Med afsæt i forfatterens fænomenografiske studie af amerikanske musikeres oplevelse af det at jamme diskuterer artiklen, hvorvidt jam-bandets spontant improviserende praksis kan give ny forståelse af rytmiske musikeres læring som et overordnet socialt fænomen. Ved at betragte jam-bandets praksis i...

  6. Feedback i professionsuddannelsen som pædagog

    DEFF Research Database (Denmark)

    Rold, Mette; Bjørnshave, Inge Andrea

    2015-01-01

    Feedback som begreb er her og nu kommet i søgelyset på de videregående uddannelser, fordi mange studerende, blandt andet i medierne, tilkendegiver at de ikke modtager nok feedback i forhold til den undervisning, de modtager. Dette paper er udgangspunkt for en fælles diskussion om netop dette....

  7. An HTS machine laboratory prototype

    DEFF Research Database (Denmark)

    Mijatovic, Nenad; Jensen, Bogi Bech; Træholt, Chresten

    2012-01-01

    This paper describes Superwind HTS machine laboratory setup which is a small scale HTS machine designed and build as a part of the efforts to identify and tackle some of the challenges the HTS machine design may face. One of the challenges of HTS machines is a Torque Transfer Element (TTE) which...... conduction compared to a shaft. The HTS machine was successfully cooled to 77K and tests have been performed. The IV curves of the HTS field winding employing 6 HTS coils indicate that two of the coils had been damaged. The maximal value of the torque during experiments of 78Nm was recorded. Loaded with 33...

  8. Selvrefleksion som uddannelsesgreb – en kritisk diskussion

    DEFF Research Database (Denmark)

    Feilberg, Casper

    2015-01-01

    Hvordan kan ureflekteret motivation gribe forstyrrende ind i de studerendes videnskabelige arbejde, og hvordan kan man som vejleder forholde sig til disse private forhold på en både faglig og etisk forsvarlig måde? I artiklen vises eksempler på, at studerende nemt kan komme til at agere ud fra ur...

  9. A new design for SLAM front-end based on recursive SOM

    Science.gov (United States)

    Yang, Xuesi; Xia, Shengping

    2015-12-01

    Aiming at the graph optimization-based monocular SLAM, a novel design for the front-end in single camera SLAM is proposed, based on the recursive SOM. Pixel intensities are directly used to achieve image registration and motion estimation, which can save time compared with the current appearance-based frameworks, usually including feature extraction and matching. Once a key-frame is identified, a recursive SOM is used to actualize loop-closure detecting, resulting a more precise location. The experiment on a public dataset validates our method on a computer with a quicker and effective result.

  10. Fiskeren som forsvant? En studie av avfolking, overbefolking og endringsprosesser i norsk fiskerinæring

    OpenAIRE

    Johnsen, Jahn Petter

    2003-01-01

    Hva er en fisker? Dette er det sentrale spørsmålet i denne avhandlinga. Spørsmålet er utgangspunkt for å utforske endringsprosesser i fiskerinæringa, både i fortida og i samtida. På bakgrunn av dette drøfter avhandlinga hvilke oppfatninger, forståelser og beskrivelser som til enhver tid benyttes til å definere hva fiskere er i ulike sammenhenger. Undersøkelsen starter i det som kan kalles rekrutteringsdiskursen i fiske, som nettopp handler om hva fiskere er og hvordan de skapes...

  11. Proto-2, an ALICE detector prototype, went to the United States (during transport)

    CERN Multimedia

    2002-01-01

    Proto-2, an ALICE detector prototype, overcame its prototype status to become a real part of the STAR experiment at the US Brookhaven National Laboratory.After more than two years across the ocean, it has just arrived back at CERN

  12. Feedback som indgang til læringsprocessen

    DEFF Research Database (Denmark)

    Kirkegaard, Preben Olund

    2017-01-01

    Feedback har til formål at forbedre dine studerendes færdigheder i et fag. Feedback skal tage udgangspunkt i den studerendes nuværende færdigheder og inkludere anvisninger på, hvordan den studerende fremadrettet kan arbejde for at opfylde et ønsket læringsmål. Måden hvorpå du som underviser...

  13. Applications of Self-Organising Map (SOM) for prioritisation of endemic zones of filariasis in Andhra Pradesh, India.

    Science.gov (United States)

    Murty, Upadhayula Suryanaryana; Rao, Mutheneni Srinivasa; Sriram, K; Rao, K Madhusudhan

    2011-01-01

    Entomological and epidemiological data of Lymphatic Filariasis (LF) was collected from 120 villages of four districts of Andhra Pradesh, India. Self-Organising Maps (SOMs), data-mining techniques, was used to classify and prioritise the endemic zones of filariasis. The results show that, SOMs classified all the villages into three major clusters by considering the data of Microfilaria (MF) rate, infection, infectivity rate and Per Man Hour (PMH). By considering the patterns of cluster, appropriate decision can be drawn for each parameter that is responsible for disease transmission of filariasis. Hence, SOM will certainly be a suitable tool for management of filariasis. The detailed application of SOM is discussed in this paper.

  14. Courthouse Prototype Building

    Energy Technology Data Exchange (ETDEWEB)

    Malhotra, Mini [ORNL; New, Joshua Ryan [ORNL; Im, Piljae [ORNL

    2018-02-01

    As part of DOE's support of ANSI/ASHRAE/IES Standard 90.1 and IECC, researchers at Pacific Northwest National Laboratory (PNNL) apply a suite of prototype buildings covering 80% of the commercial building floor area in the U.S. for new construction. Efforts have started on expanding the prototype building suite to cover 90% of the commercial building floor area in the U.S., by developing prototype models for additional building types including place of worship, public order and safety, public assembly. Courthouse is courthouse is a sub-category under the “Public Order and Safety" building type category; other sub-categories include police station, fire station, and jail, reformatory or penitentiary.ORNL used building design guides, databases, and documented courthouse projects, supplemented by personal communication with courthouse facility planning and design experts, to systematically conduct research on the courthouse building and system characteristics. This report documents the research conducted for the courthouse building type and proposes building and system characteristics for developing a prototype building energy model to be included in the Commercial Building Prototype Model suite. According to the 2012 CBECS, courthouses occupy a total of 436 million sqft of floor space or 0.5% of the total floor space in all commercial buildings in the US, next to fast food (0.35%), grocery store or food market (0.88%), and restaurant or cafeteria (1.2%) building types currently included in the Commercial Prototype Building Model suite. Considering aggregated average, courthouse falls among the larger with a mean floor area of 69,400 sqft smaller fuel consumption intensity building types and an average of 94.7 kBtu/sqft compared to 77.8 kBtu/sqft for office and 80 kBtu/sqft for all commercial buildings.Courthouses range in size from 1000 sqft to over a million square foot building gross square feet and 1 courtroom to over 100 courtrooms. Small courthouses

  15. Molecular characterization of charcoal to identify adsorbed SOM and assess the effectiveness of common SOM-removing pretreatments prior to radiocarbon dating

    NARCIS (Netherlands)

    Wagner, T.V.; Mouter, A.K.; Parsons, J.R.; Sevink, J.; van der Plicht, J.; Jansen, B.

    A significant part of our knowledge on Holocene landscape development and associated human history in northwestern Europe is based on radiocarbon dating of charcoal originating from podzols. However, these soils are characterized by leaching of soil organic matter (SOM) that may adsorb to older

  16. Surhetsvariasjoner som følge av nedtapping av et regulert vann.

    OpenAIRE

    Selmer-Olsen, A. R.

    1981-01-01

    Det har vært utført analyser og lagringsforsøk med prøver av tørrlagt bunnmateriale fra Trevatn tatt våren 1976. Prøver tatt ute i terrenget om høsten etter en lang tørr sommer viste stort sett samme bilde som prøvene fra våren etter lagring i laboratoriet under aerobe betingelser. Tabell 2 viser hvordan pH og SO4-S varierer med Iagringsbetingelsene. Oksydasjonsprosessene som slikt materiale blir utsatt for ved lufttilgang over et lengre tidsrom kan resultere i utvasking av meget sure forbind...

  17. Changes in SOM composition and stability to microbial degradation over time in response to wood chip ash fertilisation

    DEFF Research Database (Denmark)

    Hansen, Mette; Saarsalmi, Anna; Peltre, Clement

    2016-01-01

    spectroscopy (FTIR-PAS) analysis of bulk soil samples. Ash fertilisation of forest soils affected SOM composition in the O-horizon, but not in the top 5 cm of the mineral soil. The pH and biodegradability of SOM were increased in the O-horizon. The changes in SOM composition consisted of enrichment of Fe...... in Denmark, where ash had been spread at different times. Changes in SOM biodegradability were estimated based on an incubation experiment, expressed as percentage of initial carbon. Changes in SOM composition were characterised using thermal analysis and Fourier transform mid-infrared photoacoustic......- and Al-oxides/hydroxides, depletion of carboxylic and aromatic groups and lower thermal stability in soils with older and greater ash application. Ash fertilisation increased soil pH, either right after ash application or through a buffering effect of the ash on acidification caused by decomposing...

  18. [SOMS-2: translation into portuguese of the screening for Somatoform Disorders].

    Science.gov (United States)

    Fabião, Cristina; Costa E Silva, Carolina; Fleming, Manuela; Barbosa, António

    2008-01-01

    The diagnosis of Somatization Disorder (SD) requires the presence of somatic medically unexplained symptoms (MUS) which must be assessed so that organic diseases may be excluded. SOMS-2 is a self-report measure for SD that assesses medically unexplained symptoms by requiring participants to answer affirmatively and qualify any of the complaints as MUS, only if they have obtained from his doctor the opinion that the said complaint is not due to an organic disease. According to the authors, original SOMS-2 has a good internal consistency with Cronbach's a = .87 and a good correlation between selfratings and interview (r = .75). After obtaining the author's permission, translation from and into English has been made by experienced translators. The resulting questionnaire has been used on a small group of patients. Afterwards the items in which there were difficulties in understanding during the pretest were identified and experienced practitioners were asked for suggestions. The resulting version was answered by 123 primary health care patients (sample I). After some modifications of the SOMS-2, another group of 190 primary health care patients answered the questionnaire (sample II). Most patients, in the first sample, found it difficult to understand that, in order to answer affirmatively it was necessary to answer three questions: 1) is the symptom present? 2) has your doctor found no clear causes for the symptom? 3) does the symptom affect your well-being? The difficulties in understanding items 21 and 45 (pre-test) were confirmed. Items 11, 28 and 38 were more easily understood when worded differently. In sample I, less than 5% of positive answers were given to items 20, 21, 23, 40, 43, 45, and 51. Probably because of the low education level of the Portuguese population which this sample reflects, difficulties in carrying out the instructions given at the beginning made it advisable to modify the SOMS-2, so that the three implicit questions in each question of the

  19. Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL)

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose:The Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL) provides a variety of research, design engineering and prototype fabrication services...

  20. SOM storage and pool distribution in forest soils along climatic and altitudinal gradients across Switzerland

    Science.gov (United States)

    Gosheva, Sia; Müller, Mirjam; Walthert, Lorenz; Zimmermann, Stephan; Niklaus, Pascal A.; González Domínguez, Beatriz R.; Abiven, Samuel; Hagedorn, Frank

    2016-04-01

    Soil organic matter (SOM) plays a key role for a number of soil and ecosystem functions. Yet our quantitative understanding of the main driving factors is uncertain. SOM consists of a continuum of compounds ranging from slightly altered plant residues, known as particulate OM (POM) to mineral-associated OM (mOM). POM is the most rapidly cycling and hence vulnerable fraction of SOM. Therefore, it might respond particularly sensitive to climate change. In grassland soils, SOM content as well as the contribution of POM was found to increase with increasing elevation, which suggests that climate exerts a major control on SOM stability and storage. Little is known, however, for forest soils where a substantial fraction of POM is stored in the organic layer. In our study based on 1000 soil profiles, we explore the controlling factors of SOM stocks and the distribution of POM in the organic layer as well as within mineral soils in forests across Switzerland. We hypothesize that (i) elevation and hence climate have rather negligible effects on carbon (C) stocks, but exert large effects on SOM quality (contribution of POM, SOM depth distribution, and C/N ratio); (ii) furthermore, we postulate to find an elevational effect on C stocks in the organic layer but not in the mineral soil. We examined SOM stocks in the organic layer and the mineral soil of 1000 soil profiles. Mineral soils (0-20cm) from a subset of 54 sites were separated into free light fraction and occluded light fraction, representing POM, while fine heavy fraction and coarse heavy fraction represented the mineral-associated OM. The sites, all located in Swiss forests, were distributed along a great elevational gradient ranging between 277 and 2207 m a.s.l., and spanning a gradient in mean annual temperatures (MAT) from 0.6 to 11.9 °C, and mean annual precipitation (MAP) from 704 to 2340 mm. Our results indicate that POM and C/N ratio are more closely related to elevation and climate compared to mOM. For C

  1. Design of a prototype gap shaping spiral dipole for a variable energy protontherapy FFAG

    International Nuclear Information System (INIS)

    Planche, T.; Fourrier, J.; Lancelot, J.L.; Meot, F.; Neuveglise, D.; Pasternak, J.

    2009-01-01

    The design, fabrication and measurement of a prototype magnet is part of the RACCAM ANR medical FFAG project. This magnet prototyping work, started in early 2006, is being performed in collaboration between the IN2P3/LPSC laboratory team and the magnet engineering firm SIGMAPHI. Magnetic computations and parameters of the magnet prototype will be presented in this paper.

  2. Rushdie som symbol på blasfemi mod islam

    DEFF Research Database (Denmark)

    Jacobsen, Brian Arly

    2012-01-01

    Vil man forstå dødsdommen over Rushdie, skal man forstå billederne om Iran, der er konstrueret af Rushdie i De Sataniske Vers. Det handler om Rushdies brug af forskellige narrativer, eksempelvis brugen af begrebet 'Jahilia', som er velkendt af alle muslimer, der anvendes til at karakterisere Mekk...

  3. Sansning som redskab og metode for faget Modedesign

    DEFF Research Database (Denmark)

    Ræbild, Ulla

    2009-01-01

      Abstract / dansk Intentionen i denne afhandling er at undersøge, hvornår og hvordan designere anvender sansemæssig viden og kompetence i deres arbejdsproces, for igennem denne afdækning at kunne foretage en eksplicitering og artikulation af sansning som redskab og metode i designprocessen. Afha...

  4. Socialpædagogik iagttaget som et socialt praksisfelt

    DEFF Research Database (Denmark)

    Hansen, Janne Hedegaard

    2013-01-01

    Ved at iagttage socialpædagogers situerede handlinger i praksis er det muligt at opnå viden om de forståelser, socialpædagoger handler på grundlag af, og som sætter betingelser for brugernes handle- og livsmuligheder. Men brugerne er ikke blot underlagt socialpædagogers betydningskonstruktioner...

  5. Pave Benedikt XVI som social kritiker og moderniseringsteoretiker

    DEFF Research Database (Denmark)

    Thomassen, Bjørn

    2013-01-01

    former for kritik af det moderne projekt, en kritik som deler mange lighedspunkter med Frankfurterskolen. Disse ligheder kom blandt andet til syne i Kardinal Ratzingers berømte debat med Habermas, men ligeledes i nogle af hans seneste skrifter, især hans meget omtalte tredje encyklik, Caritas in Veritate...

  6. Development of Prototype Laboratory Setup for Selective Detection of Ethylene Based on Multiwalled Carbon Nanotubes

    Directory of Open Access Journals (Sweden)

    J. Kathirvelan

    2014-01-01

    Full Text Available We report here a prototype laboratory setup for detecting ethylene (C2H4 in ppm level employing a sensor made of multiwalled carbon nanotubes of 40 nm average tube diameter. The proposed reversible chemoresistive ethylene sensor is fabricated using Kapton as the substrate onto which carbon nanotubes are coated using thick film technology. IDT silver electrodes are printed using piezo head based ink-jet printing technology. The increases in electrical resistance of the sensor element are measured on exposure to ethylene for different ethylene concentrations using a potentiostat and data acquisition system. The increase in resistance of the calibrated sensor element on exposure to ethylene (analyte is about 18.4% at room temperature for 50 ppm ethylene concentration. This change is reversible. Our sensor element exhibits a better performance than those reported earlier (1.8% and it has got the rise and fall time of 10 s and 60 s, respectively. It could be used for testing the ripening of fruits.

  7. 40 år gamle kvinner som bruker hormonregimer – sunne utvalg eller risikogrupper?

    Directory of Open Access Journals (Sweden)

    Sidsel Graff-Iversen

    2009-11-01

    Full Text Available  SAMMENDRAGFormålet med denne artikkelen var å studere brukerne av kombinerte antikonsepsjonsmidler, regimer med progesteronalene og østrogensubstitusjon blant norske 40-åringer. Var det først og fremst lavrisikogrupper – friske ogrøykfrie kvinner – som brukte p-piller av kombinasjonstype, slik gjeldende anbefalinger råder til? Var progesteronbrukerneet utvalg av særlig helsebevisste kvinner? Hvor utbredt var bruken av østrogen i denne aldersgruppen?Var det tegn til at østrogenbrukerne er en “healthy selection”, slik utenlandske studier har vist?Materialet er fra 40-åringsundersøkelser i 11 norske fylker i tiden 1997-99. Resultatene viser at 3,5% avkvinnene brukte kombinerte antikonseptiva og at disse utgjorde et “sunt utvalg” med lave andeler røykere og godhelse. De 9,4% av kvinnene som brukte progesteron alene, skilte seg derimot lite fra premenopausale kvinner utenhormonbruk. De 2,4% av kvinnene som brukte østrogen, hadde mindre god helse, høyere andel røykere og lavereutdanningsnivå, sammenlignet med premenopausale kvinner. Men sammenligning innen gruppen av post- og perimenopausalekvinner viste ingen vesentlig forskjell mellom østrogenbrukerne og andre. Resultatet fra den førstekontrollerte studien av østrogen og hjertesykdom kom i 1998, men førte ikke til noen påviselig forskjell i seleksjonentil østrogenbruk fra 1997 til 1999.Konklusjonen er at kvinnene som brukte kombinerte antikonseptiva i 40-årsalderen var en “sunn seleksjon” itråd med det som blir anbefalt, mens de som brukte progesteron alene skilte seg lite ut fra kvinner som ikke bruktehormoner. Kvinner som brukte østrogen i denne unge alderen, sto fram som en helsemessig risikogruppe imaterialet som helhet, men skilte seg lite ut fra andre antatt post- eller perimenopausale kvinner i 40-årsalderen.Graff-Iversen, S. 40-year old female sex hormone users: healthy selections or risk groups? Results fromhealth surveys in 11 Norwegian

  8. Musik som værk og handling

    DEFF Research Database (Denmark)

    Vandsø, Anette

    Denne bog handler om den nye musik som både har værkkarakter men også en udpræget handlingskarakter. Her sys på symaskiner og smadres violiner, men hvad gør det ved værkkarakteren? ved værkanalysen ? og ved 'musikken'? På baggrund af disse spørgsmål tilbyder bogen en grundlagsteoretisk gentænkning...

  9. Studiemiljøundersøgelse som empowerment

    DEFF Research Database (Denmark)

    Keller, Hanne Dauer; Jensen, Annie Aarup

    2012-01-01

    Artiklen fokuserer på det metodemæssige i at arbejde med studiemiljø og studiemiljøundersøgelser i en kvalitativ, procesorienteret form, der står i kontrast til de traditionelle kvantitative metoder. En alternativ organisering med de studerende som ansvarlige aktører gav andre, mere nuancerede da...... datatyper og aktiverede de studerende i forhold til at påvirke eget studiemiljø....

  10. Data splitting for artificial neural networks using SOM-based stratified sampling.

    Science.gov (United States)

    May, R J; Maier, H R; Dandy, G C

    2010-03-01

    Data splitting is an important consideration during artificial neural network (ANN) development where hold-out cross-validation is commonly employed to ensure generalization. Even for a moderate sample size, the sampling methodology used for data splitting can have a significant effect on the quality of the subsets used for training, testing and validating an ANN. Poor data splitting can result in inaccurate and highly variable model performance; however, the choice of sampling methodology is rarely given due consideration by ANN modellers. Increased confidence in the sampling is of paramount importance, since the hold-out sampling is generally performed only once during ANN development. This paper considers the variability in the quality of subsets that are obtained using different data splitting approaches. A novel approach to stratified sampling, based on Neyman sampling of the self-organizing map (SOM), is developed, with several guidelines identified for setting the SOM size and sample allocation in order to minimize the bias and variance in the datasets. Using an example ANN function approximation task, the SOM-based approach is evaluated in comparison to random sampling, DUPLEX, systematic stratified sampling, and trial-and-error sampling to minimize the statistical differences between data sets. Of these approaches, DUPLEX is found to provide benchmark performance with good model performance, with no variability. The results show that the SOM-based approach also reliably generates high-quality samples and can therefore be used with greater confidence than other approaches, especially in the case of non-uniform datasets, with the benefit of scalability to perform data splitting on large datasets. Copyright 2009 Elsevier Ltd. All rights reserved.

  11. Faktorer som påverkar barndödligheten i Etiopien

    OpenAIRE

    Östman, Hanna

    2014-01-01

    Temat för detta examensarbete är barndödlighet i Etiopien. Syftet är att undersöka den höga småbarnsdödligheten, orsakad av diarré och malaria. Detta är ett beställningsarbete för organisationen PADet, som har ett samarbete med yrkeshögskolan Arcada. Med småbarn menas i denna studie, barn under fem år. Frågeställningarna för arbetet är, Vilka är de främsta orsakerna som påverkar småbarnsdödligheten vid diarré och malaria? Och Vad görs idag för att minska på småbarnsdödligheten vid diarré och ...

  12. Specialet som glasloft – hvorfor får mandlige studerende bedre specialekarakterer?

    Directory of Open Access Journals (Sweden)

    Vibeke Lehmann Nielsen

    2012-03-01

    Full Text Available Selvom de mandlige universitetsstuderende ikke klarer sig bedre end kvinderne frem til specialet, får de gennemsnitligt bedre specialekarakterer. Artiklens analyser viser, at det hverken handler om specialevejlederens køn eller om typen af universitetsstudium. Mulige forklaringer, som det er værd for kommende forskning at forfølge, er dels generel diskrimination af kvindelige specialestuderende og dels de studerendes møde med specialet, hvor kønnenes livssituation og/eller deres reaktioner på rollen som specialestuderende kan være forskellige.

  13. Differences in SOM decomposition and temperature sensitivity among soil aggregate size classes in a temperate grasslands.

    Directory of Open Access Journals (Sweden)

    Qing Wang

    Full Text Available The principle of enzyme kinetics suggests that the temperature sensitivity (Q10 of soil organic matter (SOM decomposition is inversely related to organic carbon (C quality, i.e., the C quality-temperature (CQT hypothesis. We tested this hypothesis by performing laboratory incubation experiments with bulk soil, macroaggregates (MA, 250-2000 μm, microaggregates (MI, 53-250 μm, and mineral fractions (MF, MF>bulk soil >MI(P <0.05. The Q10 values were highest for MA, followed (in decreasing order by bulk soil, MF, and MI. Similarly, the activation energies (Ea for MA, bulk soil, MF, and MI were 48.47, 33.26, 27.01, and 23.18 KJ mol-1, respectively. The observed significant negative correlations between Q10 and C quality index in bulk soil and soil aggregates (P<0.05 suggested that the CQT hypothesis is applicable to soil aggregates. Cumulative C emission differed significantly among aggregate size classes (P <0.0001, with the largest values occurring in MA (1101 μg g-1, followed by MF (976 μg g-1 and MI (879 μg g-1. These findings suggest that feedback from SOM decomposition in response to changing temperature is closely associated withsoil aggregation and highlights the complex responses of ecosystem C budgets to future warming scenarios.

  14. Studerendes caseundersøgelser som omdrejningspunkt for forskningsbaseret holdundervisning

    Directory of Open Access Journals (Sweden)

    Nina Bonderup Dohn

    2013-03-01

    Full Text Available Artiklen indledes med en diskussion af, hvori forskningsbaseret undervisning (FU består. Vi bestemmer FU som undervisning, hvor studerende involveres som aktive deltagere i processen med at producere ny viden ved brug af forskningsmetode. Vores overordnede forskningsspørgsmål lyder: Hvilke muligheder giver et didaktisk design baseret på, at de studerende inddrages som bidragydere til forskningsprocessen, for at realisere de forskellige begrundelser for forskningsbaseret undervisning? Hvilke problemstillinger viser der sig i forsøget herpå? Spørgsmålet undersøges med fokus på læringsteoretiske begrundelser og filosofiske begrundelser for FU. Vi rapporterer resultater fra et følgeforskningsprojekt i et undervisningsforløb, designet ud fra vores bestemmelse af FU. I diskussionen argumenterer vi for, at de læringsteoretiske begrundelser har rimelige muligheder for at realiseres med det didaktiske design, mens de filosofiske begrundelser kræver mere understøttelse. Resultaterne peger på en række problemstillinger og barrierer for realiseringen af FU (i en bestemmelse som vores og af begrundelserne for FU. Blandt disse er, at det didaktiske design indebærer en uvant arbejds- og studieform for de studerende, at der kan være en spænding mellem studieordningens faglige mål og FU (i en bestemmelse som vores, og at studerendes instrumentalistiske, erhvervsrettede mål kan være en barriere for realisering af de filosofiske begrundelser for FU. The article starts with a short discussion of different views on research-based teaching (RT. We characterize RT as teaching where students are involved as active participants in the process of producing new knowledge through the use of research methods. Our overall research question is: What possibilities does a pedagogical design based on involving students as contributors to the research process offer for realizing the different reasons for RT? What problems can arise? The research question

  15. Digital portfolio som metode og pædagogik

    DEFF Research Database (Denmark)

    Toft, Hanne; Luplau Schnefeld, Mette

    2004-01-01

    Artiklen præsenterer erfaringer med digital portfolio som didaktik og metode. Fokus er på kobling mellem didaktiske læreprocesser på en grunduddannelse og så understøttelse af disse via brug af en digital portfolio. Portfolioen adskiller en række forskellige dokumentsamlinger i privat og offentlig...

  16. Luhmanns masmedieteori och Internet som ett artificiellt intelligent semiotiskt system Luhmanns massmedieteori och Internet som ett artificiellt intelligent semiotiskt system [Luhmann’s mass-media theory and Internet as an artificial intelligent semiotic system

    Directory of Open Access Journals (Sweden)

    Peter Kåhre

    2010-11-01

    Full Text Available Artikeln diskuterar hur en modern form av AI-programmering, som kallas Konnektionism i en design som kallas Distribuerad AI (DAI, påverkar den uppfattning Luhmann har om massmediernas roll för den andra ordningens observationer. DAI använder noder för att skapa aktivitet i systemen och inte de koder som styr processerna i den klassiska eller symboliska formen av AI. Luhmanns teori kan utvecklas genom att ersätta systemens koder med noder som förändras beroende på i vilken relation de står till andra noder. På så sätt kan kommunikationsbegreppet utvecklas så att det också omfattar systemens interaktioner med omvärlden. Det skapar en bättre förutsättning för att observationsmöjligheter direkt uppstår genom systemens relationer till omvärlden. Internet och AI-programmerade söksystem och robotar kan då fungera som ett artificiellt semiotiskt system som skapar möjligheter att göra observationer.The article discusses how a modern form of AI programming, known as Connectionism in a design known as Distributed Artificial Intelligence (DAI, affects the perception Luhmann has on mass media's role concerning second-order observations. DAI uses nodes to create activity in the systems and not the codes used by the Classic or Symbolic form of AI. Luhmann’s theory can be developed by replacing the systems codes with nodes that change depending on their relations to other nodes. In this way, we can reformulate the concept of communication, so that it includes the systems interactions with the environment. It creates better conditions so that observing opportunities may arise directly from these interactions. Internet and AI-programmed search systems and robots can then act as an artificial semiotic system that creates opportunities for making observations.

  17. Som i et spejl - Hans Egede-receptionen gennem tre hundrede år

    DEFF Research Database (Denmark)

    Kjærgaard, Kathrine

    2008-01-01

    stor, og længe ville man ikke vide af Hans Egede, der - skønt født i Norge - opfattedes som dansk. Først efter 1945, hvor Norge i kølvandet på Danskehjælpen under Anden Verdenskrig omsider forsonede sig med Danmark, tog man atter Hans Egede til sig. Blandt større mindesmærker, som er blevet til siden...... 1945, kan nævnes Nicolai Schiølls ungdommelige statue af grønlandsmissionæren i det centrale Oslo (1965) og Axel Revolds monumentale udskmykning af kirken i Hans Egedes nordnorske fødeby Harstad (1958). I Danmark, hvor sorgen over tabet af Norge var stor, var man i årene efter 1814 meget...... tilbageholdende med at omklamre tidligere norske landsmænd som Hans Egede. Først hen mod slutningen af 1800-tallet begyndte forbeholdene at smelte et efter et. Den definitive omdefinering af den dansk-norske 1700-tals patriot til national dansk kirkefyrste kom med opstillingen 1913 af hans statue ved Marmorkirken...

  18. Prototype thermochemical heat storage with open reactor system

    NARCIS (Netherlands)

    Zondag, H.A.; Kikkert, B.; Smeding, S.F.; Boer, de R.; Bakker, M.

    2013-01-01

    Thermochemical (TC) heat storage is an interesting technology for future seasonal storage of solar heat in the built environment. This technology enables high thermal energy storage densities and low energy storage losses. A small-scale laboratory prototype TC storage system has been realized at

  19. Study on development of virtual reactor core laboratory (1). Development of prototype coupled neutronic, thermal-hydraulic and structural analysis system

    International Nuclear Information System (INIS)

    Uto, Nariaki; Sugaya, Toshio; Tsukimori, Kazuyuki; Negishi, Hitoshi; Enuma, Yasuhiro; Sakai, Takaaki

    1999-09-01

    A study on development of virtual reactor core laboratory, which is to conduct numerical experiments representative of complicated physical phenomena in practical reactor core systems on a computational environment, has progressed at Japan Nuclear Cycle Development Institute (JNC). The study aims at systematic evaluation of these phenomena into which nuclear reactions, thermal-hydraulic characteristics, structural responses and fuel behaviors combine, and effective utilization of the obtained comprehension for core design. This report presents a production of a prototype computational system which is required to construct the virtual reactor core laboratory. This system is to evaluate reactor core performance under the coupled neutronic, thermal-hydraulic and structural phenomena, and is composed of two analysis tools connected by a newly developed interface program; 1) an existing space-dependent coupled neutronic and thermal-hydraulic analysis system arranged at JNC and 2) a core deformation analysis code. It acts on a cluster of several DEC/Alpha workstations. A specific library called MPI1 (Message Passing Interface 1) is incorporated as a tool for communicating among the analysis modules consisting of the system. A series of calculations for simulating a sequence of Unprotected Loss Of Heat Sink (ULOHS) coupled with rapid drop of some neutron absorber devices in a prototype fast reactor is tried to investigate how the system works. The obtained results show the core deformation behavior followed by the reactivity change that can be properly evaluated. The results of this report show that the system is expected to be useful for analyzing sensitivity of reactor core performance with respect to uncertainties of various design parameters and establishing a concept of passive safety reactor system, taking into account space distortion of neutron flux distribution during abnormal events as well as reactivity feedback from core deformation. (author)

  20. Encapsulation of polymer photovoltaic prototypes

    Energy Technology Data Exchange (ETDEWEB)

    Krebs, Frederik C. [The Danish Polymer Centre, RISOE National Laboratory, P.O. Box 49, DK-4000 Roskilde (Denmark)

    2006-12-15

    A simple and efficient method for the encapsulation of polymer and organic photovoltaic prototypes is presented. The method employs device preparation on glass substrates with subsequent sealing using glass fiber reinforced thermosetting epoxy (prepreg) against a back plate. The method allows for transporting oxygen and water sensitive devices outside a glove box environment after sealing and enables sharing of devices between research groups such that efficiency and stability can be evaluated in different laboratories. (author)

  1. Den Pædagogiske Refleksionsmodel som sammenhængskraft

    DEFF Research Database (Denmark)

    Voergaard Poulsen, Bettina; Lucht, Camill; Vibholm Persson, Stine

    Den Pædagogiske Refleksions Model (PRM) illustrerer de vidensdimensioner, der indgår i en kvalificeret klinisk beslutning. I projektet 'Sammenhæng på TVÆRS i fremtidens sygeplejeuddannelse (PÅ TVÆRS)" indgår PRM som pædagogisk greb. Der undersøges om PRM skaber sammenhæng for studerendes læring i...

  2. Sociale teknologier og web 2.0 som vidensmedier

    DEFF Research Database (Denmark)

    Johannsen, Carl Gustav

    2011-01-01

    Artiklen fokuserer på effekten af brugen af sociale teknologier i folkebibliotekerne med fokus på i hvilken udstrækning de sociale teknologier lader sig forstå og analysere som vidensmedier, kommunikationsmønstre ved brug af sociale medier, de sociale mediers virkninger i undervisningssammenhænge...... og endelig de kulturpolitiske konsekvenser af bibliotekernes inddragelse af sociale teknologier....

  3. Lyd som kommunikation. En tværfaglig forskningsoversigt og en dagsorden for medieforskningen

    Directory of Open Access Journals (Sweden)

    Klaus Bruhn Jensen

    2008-06-01

    Full Text Available Lyden har ikke noget videnskabeligt hjem – i modsætning til f.eks. faste og levende billeder, der traditionelt er blevet studeret af henholdsvis kunsthistorien og filmvidenskaben. Denne artikel giver en oversigt over de mange, meget forskellige slags forskning om lyd. Formålet er at stimulere og kvalificere mere medieforskning om lyd. Hovedvægten ligger på lyd som kommunikation i og omkring medierne – som en kilde til mening og en ressource i social og kulturel handling, snarere end på lyd i et teknisk eller akustisk perspektiv (se f.eks. Plomp, 2002. Første del af artiklen gennemgår forskellige humanistiske og samfundsvidenskabelige tilgange til lydens tre grundformer – tale, musik og soundscapes eller lydmiljøer. Det midterste afsnit diskuterer den tidligere forsknings relevans for forskellige slags medier; artiklen skelner her mellem tre grader af medier. Og artiklens sidste del samler de tværfaglige indsigter i en dagsorden for (meget mere medieforskning om lyd som kommunikation.

  4. Lyd som kommunikation. En tværfaglig forskningsoversigt og en dagsorden for medieforskningen

    Directory of Open Access Journals (Sweden)

    Klaus Bruhn Jensen

    2006-06-01

    Full Text Available Lyden har ikke noget videnskabeligt hjem – i modsætning til f.eks. faste og levende billeder, der traditionelt er blevet studeret af henholdsvis kunsthistorien og filmvidenskaben. Denne artikel giver en oversigt over de mange, meget forskellige slags forskning om lyd. Formålet er at stimulere og kvalificere mere medieforskning om lyd. Hovedvægten ligger på lyd som kommunikation i og omkring medierne – som en kilde til mening og en ressource i social og kulturel handling, snarere end på lyd i et teknisk eller akustisk perspektiv (se f.eks. Plomp, 2002. Første del af artiklen gennemgår forskellige humanistiske og samfundsvidenskabelige tilgange til lydens tre grundformer – tale, musik og soundscapes eller lydmiljøer. Det midterste afsnit diskuterer den tidligere forsknings relevans for forskellige slags medier; artiklen skelner her mellem tre grader af medier. Og artiklens sidste del samler de tværfaglige indsigter i en dagsorden for (meget mere medieforskning om lyd som kommunikation.

  5. Infiltrationsanæstesi som postoperativ smertebehandling ved hoftenær femurfraktur - et igangværende studie

    DEFF Research Database (Denmark)

    Bech, Rune Dueholm

    2008-01-01

    pertrochantær femurfraktur og collum femoris fraktur inkluderes. 50 patienter indgår i hver af de to diagnose-grupper (to delstudier). Ved randomisering tildeles patienterne hhv. Ropivacain eller placebo (NaCl), der gives som 1 peroperativ og 6 postoperative bolusinstillationer via et kateter, som fjernes efter...

  6. Adversary phase change detection using S.O.M. and text data

    International Nuclear Information System (INIS)

    Speed, Ann Elizabeth; Doser, Adele Beatrice; Warrender, Christina E.

    2010-01-01

    In this work, we developed a self-organizing map (SOM) technique for using web-based text analysis to forecast when a group is undergoing a phase change. By 'phase change', we mean that an organization has fundamentally shifted attitudes or behaviors. For instance, when ice melts into water, the characteristics of the substance change. A formerly peaceful group may suddenly adopt violence, or a violent organization may unexpectedly agree to a ceasefire. SOM techniques were used to analyze text obtained from organization postings on the world-wide web. Results suggest it may be possible to forecast phase changes, and determine if an example of writing can be attributed to a group of interest.

  7. Architectures of prototypes and architectural prototyping

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius; Christensen, Michael; Sandvad, Elmer

    1998-01-01

    together as a team, but developed a prototype that more than fulfilled the expectations of the shipping company. The prototype should: - complete the first major phase within 10 weeks, - be highly vertical illustrating future work practice, - continuously live up to new requirements from prototyping......This paper reports from experience obtained through development of a prototype of a global customer service system in a project involving a large shipping company and a university research group. The research group had no previous knowledge of the complex business of shipping and had never worked...... sessions with users, - evolve over a long period of time to contain more functionality - allow for 6-7 developers working intensively in parallel. Explicit focus on the software architecture and letting the architecture evolve with the prototype played a major role in resolving these conflicting...

  8. Collaborative Prototyping

    DEFF Research Database (Denmark)

    Bogers, Marcel; Horst, Willem

    2014-01-01

    of the prototyping process, the actual prototype was used as a tool for communication or development, thus serving as a platform for the cross-fertilization of knowledge. In this way, collaborative prototyping leads to a better balance between functionality and usability; it translates usability problems into design......This paper presents an inductive study that shows how collaborative prototyping across functional, hierarchical, and organizational boundaries can improve the overall prototyping process. Our combined action research and case study approach provides new insights into how collaborative prototyping...... can provide a platform for prototype-driven problem solving in early new product development (NPD). Our findings have important implications for how to facilitate multistakeholder collaboration in prototyping and problem solving, and more generally for how to organize collaborative and open innovation...

  9. Arbejdspladsen som læringsmiljø

    DEFF Research Database (Denmark)

    Andersen, Vibeke; Hoyrup Pedersen, Steen

    Læring på arbejdspladsen er kommet i fokus både nationalt og internationalt som et stadigt vigtigere svar på videnssamfundets hurtigt eskalerende behov for kompetenceudvikling. Selvfølgelig kan arbejdspladslæring ikke erstatte de formaliserede erhvervs- og efteruddannelser, men arbejdspladsen er...... Workplace Learning. Konsortiet gennemfører i perioden 2001-2004 et større forskningsprogram, der udforsker læreprocesser i arbejdslivet og i samspillet mellem arbejdspladser og det formelle uddannelsessystem. Forskningsprogrammet er finansieret af Undervisningsministeriet og fokuserer primært på de...

  10. Nuclear Astrophysics at ELI-NP: the ELISSA prototype tested at Laboratori Nazionali del Sud

    Science.gov (United States)

    Guardo, Giovanni Luca; Anzalone, Antonello; Balabanski, Dimiter; Chesnevskaya, Svetlana; Crucillá, Walter; Filipescu, Dan; Gulino, Marisa; La Cognata, Marco; Lattuada, Dario; Matei, Catalin; Pizzone, Rosario Gianluca; Rapisarda, Giuseppe; Romano, Stefano; Spitaleri, Claudio; Taffara, Alessandra; Tumino, Aurora; Xu, Yi

    2018-01-01

    The Extreme Light Infrastructure-Nuclear Physics (ELI-NP) facility, under construction in Magurele near Bucharest in Romania, will provide high-intensity and high-resolution gamma ray beams that can be used to address hotly debated problems in nuclear astrophysics, such as the accurate measurements of the cross sections of the 24Mg(γ,α)20Ne reaction, that is fundamental to determine the effective rate of 28Si destruction right before the core collapse and the subsequent supernova explosion. For this purpose, a silicon strip detector array (named ELISSA, acronym for Extreme Light Infrastructure Silicon Strip Array) will be realized in a common effort by ELI-NP and Laboratori Nazionali del Sud (INFN-LNS), in order to measure excitation functions and angular distributions over a wide energy and angular range. A prototype of ELISSA was built and tested at INFN-LNS in Catania (Italy) with the support of ELI-NP. In this occasion, we have carried out experiments with alpha sources and with a 11 MeV 7Li beam. Thanks to our approach, the first results of those tests show up a very good energy resolution (better than 1%) and very good position resolution, of the order of 1 mm. Moreover, a threshold of 150 keV can be easily achieved with no cooling.

  11. Rommet som den tredje pedagog - En studie av pedagogers forståelse av rommets betydning - med fokus på estetisk virksomhet

    OpenAIRE

    Krokstad, Inger Elisabeth

    2014-01-01

    Masteroppgaven «Rommet som den tredje pedagog i tre Reggio Emilia-inspirerte barnehager. En studie av pedagogers forståelse av rommets betydning –med fokus på estetisk virksomhet» har til hensikt å bidra til økt kunnskap om estetisk virksomhet som er forbundet med Reggio Emilias tanke om rommet som den tredje pedagog. Avhandlingens problemstilling er: Hvilke mønster kan identifiseres i barnehagepedagogens forståelse av rommet som den tredje pedagog-med fokus på estetisk virksomhet? ...

  12. Design and Construction of Prototype Dark Matter Detectors

    Energy Technology Data Exchange (ETDEWEB)

    Peter Fisher

    2012-03-23

    The Lepton Quark Studies (LQS) group is engaged in searching for dark matter using the Dark Matter Time Projection Chamber (DMTPC) at the Waste Isolation Pilot Plant (WIPP) (Carlsbad, NM). DMTPC is a direction-sensitive dark matter detector designed to measure the recoil direction and energy deposited by fluorine nuclei recoiling from the interaction with incident WIMPs. In the past year, the major areas of progress have been: to publish the first dark matter search results from a surface run of the DMTPC prototype detector, to build and install the 10L prototype in the underground laboratory at WIPP which will house the 1 m{sup 3} detector, and to demonstrate charge and PMT readout of the TPC using prototype detectors, which allow triggering and {Delta}z measurement to be used in the 1 m{sup 3} detector under development.

  13. Second LaBr3 Compton Telescope Prototype

    International Nuclear Information System (INIS)

    Llosa, Gabriela; Cabello, Jorge; Gillam, John-E.; Lacasta, Carlos; Oliver, Josep F.; Rafecas, Magdalena; Solaz, Carles; Solevi, Paola; Stankova, Vera; Torres-Espallardo, Irene; Trovato, Marco

    2013-06-01

    A Compton telescope for dose delivery monitoring in hadron therapy is under development at IFIC Valencia within the European project ENVISION. The telescope will consist of three detector planes, each one composed of a LaBr 3 continuous scintillator crystal coupled to four silicon photomultiplier (SiPM) arrays. After the development of a first prototype which served to assess the principle, a second prototype with larger crystals has been assembled and is being tested. The current version of the prototype consists of two detector layers, each one composed of a 32.5 x 35 mm 2 crystal coupled to four SiPM arrays. The VATA64HDR16 ASIC has been employed as front-end electronics. The readout system consists of a custom made data acquisition board. Tests with point-like sources have been carried out in the laboratory, assessing the correct functioning of the device. The system optimization is ongoing. (authors)

  14. Rethink! prototyping transdisciplinary concepts of prototyping

    CERN Document Server

    Nagy, Emilia; Stark, Rainer

    2016-01-01

    In this book, the authors describe the findings derived from interaction and cooperation between scientific actors employing diverse practices. They reflect on distinct prototyping concepts and examine the transformation of development culture in their fusion to hybrid approaches and solutions. The products of tomorrow are going to be multifunctional, interactive systems – and already are to some degree today. Collaboration across multiple disciplines is the only way to grasp their complexity in design concepts. This underscores the importance of reconsidering the prototyping process for the development of these systems, particularly in transdisciplinary research teams. “Rethinking Prototyping – new hybrid concepts for prototyping” was a transdisciplinary project that took up this challenge. The aim of this programmatic rethinking was to come up with a general concept of prototyping by combining innovative prototyping concepts, which had been researched and developed in three sub-projects: “Hybrid P...

  15. Mixed reality for neurosurgery: a novel prototype.

    Science.gov (United States)

    Alcañiz Raya, Mariano; Varvaro Marcinek, Hugo; Martinez Saez, José Miguel; Torres Sanchez, Roque; Juan Lizandra, M Carmen; Monserrat Aranda, Carlos; Gil Gomez, José Antonio

    2003-01-01

    Microscopes and neuronavigators are often used in neurosurgical procedures. Our Mixed Reality prototype proposes to show neuronavigator imaging overlayed onto the surgical field of view. The proposal is to replace the traditional optical microscope with a digital one. The system is presented in this article. Firsts trials have been performed at the laboratory with satisfactory results.

  16. Prototype plutonium-storage monitor

    International Nuclear Information System (INIS)

    Bliss, M.; Craig, R.A.; Sunberg, D.S.; Warner, R.A.

    1996-01-01

    Pacific Northwest National Laboratory (PNNL) has fabricated cerium-activated lithium silicate scintillating fibers via a hot-downdraw process. These fibers typically have an operational transmission length (e -1 length) of greater than 2 meters. This permits the fabrication of devices that, hitherto, were not possible to consider. A prototype neutron monitor for scrap Pu-storage containers was fabricated and tested for 70 days, taking data with a variety of sources in a high-background environment. These data and their implication in the context of a storage-monitor situation are discussed

  17. SINs and SOMs: Neural microcircuits for size tuning in the zebrafish and mouse visual pathway.

    Directory of Open Access Journals (Sweden)

    Alison J. Barker

    2013-05-01

    Full Text Available In many animals, a fast and reliable circuit for discriminating between predator-sized objects and edible (prey-sized objects is necessary for survival. How are receptive fields in visual brain areas organized to extract information about size? Recent studies from the zebrafish optic tectum and the mouse visual cortex suggest de novo shaping of receptive fields by subtypes of inhibitory neurons. Del Bene et al. (2010 describe a population of GABAergic neurons in the zebrafish optic tectum (Superficial Interneurons, SINs that are necessary for size filtering during prey capture. Adesnik et al. (2012 describe a somatostatin-expressing interneuron population (SOMs that confers surround suppression on layer II/III pyramidal cells in mouse V1. Strikingly both the SINs and the SOMs, display size-dependent response properties. Increasing visual stimulus size increases excitatory input to these neurons. Dampening SIN or SOM activity alters tuning of neighboring circuits such that they lose preference for small objects. Both results provide exciting evidence for mechanisms of size filtering in visual circuits. Here we review the roles of the SINs and the SOMs and speculate on the similarity of such spatial filters across species.

  18. Som Energia: sostenibilitat energètica i cooperativisme

    OpenAIRE

    Duran i Grant, Alexandre; Huijink, Gijsbert; Roselló, Marc

    2013-01-01

    La cooperativa Som Energia és una organització innovadora en el sector energètic a casa nostra. Proposa una forma de fer diferent de la de les empreses tradicionals del sector: ven energia renovable certificada, no té ànim de lucre i busca el bé comú. La proposta treballa per la sostenibilitat energètica.

  19. Human Factors and Technical Considerations for a Computerized Operator Support System Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Ulrich, Thomas Anthony [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lew, Roger Thomas [Idaho National Lab. (INL), Idaho Falls, ID (United States); Medema, Heather Dawne [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald Laurids [Idaho National Lab. (INL), Idaho Falls, ID (United States); Thomas, Kenneth David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    A prototype computerized operator support system (COSS) has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, PI&D system representations, and a recommender module for mitigation actions. At this point, the prototype simulates an interface to a sensor validation module and a fault diagnosis module. These two modules will be fully integrated in the next version of the prototype. The initial version of the prototype is now operational at the Idaho National Laboratory using the U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) Human Systems Simulation Laboratory (HSSL). The HSSL is a full-scope, full-scale glass top simulator capable of simulating existing and future nuclear power plant main control rooms. The COSS is interfaced to the Generic Pressurized Water Reactor (gPWR) simulator with industry-typical control board layouts. The glass top panels display realistic images of the control boards that can be operated by touch gestures. A section of the simulated control board was dedicated to the COSS human-system interface (HSI), which resulted in a seamless integration of the COSS into the normal control room environment. A COSS demonstration scenario has been developed for the prototype involving the Chemical & Volume Control System (CVCS) of the PWR simulator. It involves a primary coolant leak outside of containment that would require tripping the reactor if not mitigated in a very short timeframe. The COSS prototype presents a series of operator screens that provide the needed information and soft controls to successfully mitigate the event.

  20. Aespoe Hard Rock Laboratory. Prototype Repository. Sensors data report (Period 010917-091201) Report No: 22

    International Nuclear Information System (INIS)

    Goudarzi, Reza; Johannesson, Lars-Erik

    2009-12-01

    The Prototype Repository Test consists of two sections. The installation of the first Section of Prototype Repository was made during summer and autumn 2001 and Section 2 was installed in spring and summer 2003. This report presents data from measurements in the Prototype Repository during the period 010917-091201. The report is organized so that the actual measured results are shown in Appendix 1-10, where Appendix 8 deals with measurements of canister displacements (by AITEMIN), Appendix 9 deals with geo-electric measurements in the backfill (by GRS), Appendix 10 deals with stress and strain measurement in the rock (by AaF) and Appendix 11 deals with measurement of water pressure in the rock (by VBB/VIAK). The main report and Appendix 1-7 deal with the rest of the measurements

  1. Aespoe Hard Rock Laboratory. Prototype Repository. Sensors data report (Period 010917-090601) Report No: 21

    International Nuclear Information System (INIS)

    Goudarzi, Reza; Johannesson, Lars-Erik

    2009-07-01

    The Prototype Repository Test consists of two sections. The installation of the first Section of Prototype Repository was made during summer and autumn 2001 and Section 2 was installed in spring and summer 2003. This report presents data from measurements in the Prototype Repository during the period 010917-090601. The report is organized so that the actual measured results are shown in Appendix 1-10, where Appendix 8 deals with measurements of canister displacements (by AITEMIN), Appendix 9 deals with geo-electric measurements in the backfill (by GRS), Appendix 10 deals with stress and strain measurement in the rock (by BBK) and Appendix 11 deals with measurement of water pressure in the rock (by VBB/VIAK). The main report and Appendix 1-7 deal with the rest of the measurements

  2. Aespoe Hard Rock Laboratory. Prototype Repository. Sensors data report (Period 010917-081201) Report No: 20

    International Nuclear Information System (INIS)

    Goudarzi, Reza; Johannesson, Lars-Erik

    2009-03-01

    The Prototype Repository Test consists of two sections. The installation of the first Section of Prototype Repository was made during summer and autumn 2001 and Section 2 was installed in spring and summer 2003. This report presents data from measurements in the Prototype Repository during the period 010917-081201. The report is organized so that the actual measured results are shown in Appendix 1-10, where Appendix 8 deals with measurements of canister displacements (by AITEMIN), Appendix 9 deals with geo-electric measurements in the backfill (by GRS), Appendix 10 deals with stress and strain measurement in the rock (by BBK) and Appendix 11 deals with measurement of water pressure in the rock (by VBB/VIAK). The main report and Appendix 1-7 deal with the rest of the measurements

  3. Aespoe Hard Rock Laboratory. Prototype Repository. Sensors data report (Period 010917-090601) Report No: 21

    Energy Technology Data Exchange (ETDEWEB)

    Goudarzi, Reza; Johannesson, Lars-Erik (Clay Technology AB, Lund (Sweden))

    2009-07-15

    The Prototype Repository Test consists of two sections. The installation of the first Section of Prototype Repository was made during summer and autumn 2001 and Section 2 was installed in spring and summer 2003. This report presents data from measurements in the Prototype Repository during the period 010917-090601. The report is organized so that the actual measured results are shown in Appendix 1-10, where Appendix 8 deals with measurements of canister displacements (by AITEMIN), Appendix 9 deals with geo-electric measurements in the backfill (by GRS), Appendix 10 deals with stress and strain measurement in the rock (by BBK) and Appendix 11 deals with measurement of water pressure in the rock (by VBB/VIAK). The main report and Appendix 1-7 deal with the rest of the measurements.

  4. Aespoe Hard Rock Laboratory. Prototype Repository. Sensors data report (Period 010917-081201) Report No: 20

    Energy Technology Data Exchange (ETDEWEB)

    Goudarzi, Reza; Johannesson, Lars-Erik (Clay Technology AB, Lund (Sweden))

    2009-03-15

    The Prototype Repository Test consists of two sections. The installation of the first Section of Prototype Repository was made during summer and autumn 2001 and Section 2 was installed in spring and summer 2003. This report presents data from measurements in the Prototype Repository during the period 010917-081201. The report is organized so that the actual measured results are shown in Appendix 1-10, where Appendix 8 deals with measurements of canister displacements (by AITEMIN), Appendix 9 deals with geo-electric measurements in the backfill (by GRS), Appendix 10 deals with stress and strain measurement in the rock (by BBK) and Appendix 11 deals with measurement of water pressure in the rock (by VBB/VIAK). The main report and Appendix 1-7 deal with the rest of the measurements.

  5. Aespoe Hard Rock Laboratory. Prototype Repository. Sensors data report (Period 010917-091201) Report No: 22

    Energy Technology Data Exchange (ETDEWEB)

    Goudarzi, Reza; Johannesson, Lars-Erik (Clay Technology AB, Lund (Sweden))

    2009-12-15

    The Prototype Repository Test consists of two sections. The installation of the first Section of Prototype Repository was made during summer and autumn 2001 and Section 2 was installed in spring and summer 2003. This report presents data from measurements in the Prototype Repository during the period 010917-091201. The report is organized so that the actual measured results are shown in Appendix 1-10, where Appendix 8 deals with measurements of canister displacements (by AITEMIN), Appendix 9 deals with geo-electric measurements in the backfill (by GRS), Appendix 10 deals with stress and strain measurement in the rock (by AaF) and Appendix 11 deals with measurement of water pressure in the rock (by VBB/VIAK). The main report and Appendix 1-7 deal with the rest of the measurements.

  6. Bysykler : perspektiver på bysykkelordninger som en del av en bærekraftig bytransport og urban identitet

    OpenAIRE

    Langfeldt, Tuva

    2011-01-01

    SAMMENDRAG - Byutviklingen er de senere årene preget av grønne visjoner og planlegging for levende og bærekraftige byer. Et viktig ledd i denne utviklingen er menneskelig bevegelse og mobilitet, og det ses flere og flere steder med nye øyne på hvordan mobiliteten i byen kan og bør være. Fokus på sykkel som framkomstmiddel har blitt stadig mer populært, i Europa som USA, og som et resultat av behov for en mer syklende og mindre bilkjørende befolkning er det dukket opp bysykkelordninger i bå...

  7. Content Management som platform og pædagogisk strategi

    DEFF Research Database (Denmark)

    Petersen, Kim Bach; Rasmussen, Steen Cnops

    2005-01-01

    Med afsæt i konkrete erfaringer på pædagoguddannelsen argumenteres der for, at implementeringen af it-systemer og udviklingen af de ansattes it-kompetencer bør tage afsæt i en pædagogisk tænkning, som prioriterer enkelthed og brugervenlighed højt....

  8. DUT som didaktisk felt

    DEFF Research Database (Denmark)

    Qvortrup, Ane; Keiding, Tina B.

    2015-01-01

    undervisningsformer. [Abstract in English] The paper presents a systematic categorization of 115 papers published in the Danish Journal for Teaching and Learning in Higher Education. (DUT) from 2006 to 2013. The aim is to explore which didactic topics the journal deals with and how it contributes to the Danish...... the scholarship of teaching and learning. The categorization shows that most of the contributions deal with teaching methods. A subsequent analysis shows that the contributions almost exclusively deal with active and social teaching methods (teaching as experience and teaching as interaction)......(In Danish and English) Artiklen foretager en systematisk kategorisering og analyse af de bidrag, som har været bragt i Dansk Universitetspædagogisk Tidsskrift (DUT) fra 2006-2013. Formålet er at undersøge, hvilke didaktiske temaer tidskriftet har været optaget af og at diskutere mulige...

  9. Importancia del conteo de células somáticas en la calidad de la leche

    OpenAIRE

    Hernández Reyes, Juan Manuel; Bedolla Cedeño, José Luís Carlos

    2008-01-01

    Este trabajo es una revisión sobre la importancia de las células somáticas en la calidad de la leche. Las células somáticas son, entre otras, células blancas propias del organismo que le sirven como defensa a la glándula mamaria de la vaca contra organismos patógenos. La determinación del contenido de células somáticas de la leche del tanque, o de los cuartos de la glándula mamaria de las vacas, es el medio auxiliar de diagnóstico más importante para juzgar el estado de salud de la ubre de un...

  10. Soil Response to Natural Vegetation Dynamics During the Late Holocene in Minnesota, USA, and Implications for SOM Accumulation and Loss

    Science.gov (United States)

    Mason, J. A.; Kasmerchak, C. S.; Keita, H.; Gruley, K. E.

    2016-12-01

    We studied soil response to late Holocene shifts in the dynamic boundary between forest and grassland, in two contrasting landscapes of Minnesota, USA. On both the glaciated landscape of northwestern Minnesota and steep bedrock slopes of southeastern Minnesota, forest has replaced grassland in the late Holocene (after 4 ka in the NW, during at least the last few 100 yr in the SE). Two distinct soil morphologies coexist in essentially the same climate and parent materials, Mollisols with deep SOM accumulation under grassland and Alfisols with most SOM in thin A horizons under forest. Organic carbon stocks of the Mollisols we sampled (to 1 m depth) are at least 50% greater than those of the Alfisols; thus, replacement of grassland by forest involves substantial SOM loss. Ultimately, the transition from Alfisols to Mollisols can probably be explained by much lower proportions of belowground SOM addition, and possibly less bioturbation, under forest; however, the timescale of this change is of great interest. Mollisols and transitional soils occur under forest today near the 19th century location of the vegetation boundary in NW Minnesota, and in certain slope positions in SE Minnesota. Stable C isotope profiles within those soils record the transition from C4 or mixed C3/C4 vegetation (tallgrass prairie or savanna) to C3 forest vegetation. Combined with 14C dating these data demonstrate a substantial lag in loss of the Mollisol morphology—thick SOM-rich A horizons with highly stable aggregates—after forest occupation. In fact, these thick A horizons may persist even when C4 grass-derived SOM has largely been replaced by SOM added after forest occupation. We are exploring possible explanations for this persistence in NW Minnesota. In SE Minnesota, it is likely related to parent material rich in dolomite fragments, with stable aggregation and SOM accumulation favored by abundant Ca2+and Mg2+. This parent material effect results in localization of high SOM

  11. Ares I-X Ground Diagnostic Prototype

    Science.gov (United States)

    Schwabacher, Mark A.; Martin, Rodney Alexander; Waterman, Robert D.; Oostdyk, Rebecca Lynn; Ossenfort, John P.; Matthews, Bryan

    2010-01-01

    The automation of pre-launch diagnostics for launch vehicles offers three potential benefits: improving safety, reducing cost, and reducing launch delays. The Ares I-X Ground Diagnostic Prototype demonstrated anomaly detection, fault detection, fault isolation, and diagnostics for the Ares I-X first-stage Thrust Vector Control and for the associated ground hydraulics while the vehicle was in the Vehicle Assembly Building at Kennedy Space Center (KSC) and while it was on the launch pad. The prototype combines three existing tools. The first tool, TEAMS (Testability Engineering and Maintenance System), is a model-based tool from Qualtech Systems Inc. for fault isolation and diagnostics. The second tool, SHINE (Spacecraft Health Inference Engine), is a rule-based expert system that was developed at the NASA Jet Propulsion Laboratory. We developed SHINE rules for fault detection and mode identification, and used the outputs of SHINE as inputs to TEAMS. The third tool, IMS (Inductive Monitoring System), is an anomaly detection tool that was developed at NASA Ames Research Center. The three tools were integrated and deployed to KSC, where they were interfaced with live data. This paper describes how the prototype performed during the period of time before the launch, including accuracy and computer resource usage. The paper concludes with some of the lessons that we learned from the experience of developing and deploying the prototype.

  12. Using the adaptive blockset for simulation and rapid prototyping

    DEFF Research Database (Denmark)

    Ravn, Ole

    1999-01-01

    the gap between simulation and prototype controller implementation. This is done using the code generation capabilities of Real Time Workshop in combination with C s-function blocks for adaptive control in Simulink. In the paper the design of each group of blocks normally fund in adaptive controllers...... is outlined. The block types are, identification, controller design, controller and state variable filter.The use of the Adaptive Blockset is demonstrated using a simple laboratory setup. Both the use of the blockset for simulation and for rapid prototyping of a real-time controller are shown.......The paper presents the design considerations and implementational aspects of the Adaptive Blockset for Simulink which has been developed in a prototype implementation. The basics of indirect adaptive controllers are summarized. The concept behind the Adaptive Blockset for Simulink is to bridge...

  13. Reklamen som pastiche. Om Dansk Sygeplejeråds annoncekampagne efteråret 1986

    Directory of Open Access Journals (Sweden)

    Gunhild Agger

    1989-08-01

    Full Text Available Der er flere og flere medieproducenter, der anser modtagerne for at besidde en vis tekstuel intelligens. Fra detektivpasticher som Dick Spanner og Batman over den konstant genreparodierende "Moon- lighting" (De heldige helte til Poul og Nulles respektløse faktion "I sandhedens Tjeneste" leges der med betydningsdannelsen. Seerne/læserne indbydes til selv at spille ping-pong med billeder og tekst. Gunhild Agger analyserer her denne tendens, sådan som den kom- mer til udtryk inden for reklamen: Anker Jørgensen som James Bond, og kondomer til Prinsessen på Ærten! Mest indgående beskæftiger hun sig med Dansk Sygeplejeråds brug af myten om sygeplejersken i en annoncekampagne op mod overenskomstforhandlingerne i 1987. Gunhild Agger nøjes ikke med en indholdsanalyse af annoncerne, men beskriver hele kampagnen: Dansk Sygeplejeråds hensigter med frem- stødet, kampagnens lancering over for den tre-dobbelte målgruppe, læsernes formodede reception, og kampagnens politiske og holdnings- mæssige effekter.

  14. Prototype international quality assurance program

    International Nuclear Information System (INIS)

    Broadway, J.A.; Chambless, D.A.; Sapozhnikov, Yu.A.; Kalmykov, S.N.

    1998-01-01

    The international community presently lacks the ability to determine the quality and credibility of environmental measurements that is required to make sound decisions in matters related to international security, public health, and investment-related considerations. The ultimate goal of the work described in this article is to develop a credible information base including measurement capability for determination of environmental contamination and the potential for proliferation of material components of chemical or nuclear weapons. This study compared the accuracy obtained by six Russian and six U.S. laboratories for samples representative of classes of trace metals, dioxing-furans, and radioactive substances. The results obtained in this work indicate that current estimates for laboratory accuracy are likely overly optimistic. The weaknesses discovered by this prototype U.S. - Russia study also exist within the broader international community of laboratories. Further work is proposed to address the urgent need for the international community to improve performance evaluations for analytical measurements. (author)

  15. Programproduktion som Kritisk Teori – eller tv-teksten som industriel iscenesættelse

    Directory of Open Access Journals (Sweden)

    John Caldwell

    2003-09-01

    Full Text Available Denne artikel peger på nødvendigheden af en revurdering af den tre-delte model, som Fiske og Gripsrud har fremført, ved at vise, hvorledes ‘sekundære’ og ‘tertiære’ tv-tekster uafladeligt bevæger sig eller rejser hen imod en ‘primær’ tekstuel status i det amerikan- ske multikanals-»flow«. En detaljeret gennemgang af industriens tekstuelle praksis – programbegivenheder, network-branding, ka- nallogoer, filmene bag filmen, pressemateriale på video, salgsma- teriale og tilgrænsende digitale medier – viser hvorledes industrien teoretiserer sine egne vilkår direkte på skærmen, og dermed også hvordan publikum vejledes igennem en sådan offentlig cirkulation af »inside«-viden om tv-systemet. Artiklen er oversat af Henrik Bødker.

  16. Fjernsynet som shaman: Om store mediebegivenheders transformative virkninger

    Directory of Open Access Journals (Sweden)

    Daniel Dayan

    1988-08-01

    Full Text Available Den direkte transmission af levende begivenheder har altid været TV- mediets særlige styrke, hvad enten det drejer sig om fodboldkampe, Lørdagskanalen eller kongebrylluper. Medieforskerne har da også interesseret sig for fjernsynets formidling af sportsbegivenheder og der er blevet lavet analyser af Kanaludsendelserne. Men hverken i Danmark eller andre steder har forskerne fundet det interessant at undersøge de store, ceremonielle mediebegivenheder. Det er Dayan & Katz´ projekt at udfylde dette tomrum i medie- og kul- turforskningen: Hvad er det, der fascinerer millioner ved disse TV- ceremonier, der ofte ikke blot henvender sig til et enkelt lands seere, men transmitteres til og ses af store dele af verden? Hvordan fungere disse begivenheder - hvad enten det drejer sig om Præsident Kennedys begravelse, Sadats besøg i Jerusalem, Månelandingen eller Watergate- høringerne - ideologisk, og hvilke interesser tjener de dermed i den politiske offentlighed? I denne artikel, der er et bearbejdet uddrag af den bog, projektet skal munde ud i, beskæftiger Dayan & Katz sig især med det de kalder "transformative" mediebegivenheder, dvs. TV-ceremonier der markerer, at et samfund står ved en tærskel mellem den herskende orden og en ny mulig orden, og som selv er et aktivt og aktiverende bidrag til forvand- lingen af kulturelle opfattelser og værdier. Artiklens perpektiv er udpræget tværvidenskabeligt, idet der trækkes på såvel kulturantropologiske (Levi-Strauss, Geertz, Turner som filosofiske (Bakhtin, Baudrillard, sprogteoretiske (Austin og traditionelt samfunds- videnskabelige/mediesociologiske (Boorstin arbejder. I artiklens første halvdel foretages der en afgrænsning af transformative over for andre ceremonielle begivenheder. I anden halvdel gennemgås de fem faser, som udgør transformative begivenheders typiske struktur. Artiklen er bearbejdet af Jørgen Bang og Kim Schrøder. Den er oversat af Kim Schrøder.

  17. Distinct roles of SOM and VIP interneurons during cortical Up states

    Directory of Open Access Journals (Sweden)

    Garrett T. Neske

    2016-07-01

    Full Text Available During cortical network activity, recurrent synaptic excitation among pyramidal neurons is approximately balanced by synaptic inhibition, which is provided by a vast diversity of inhibitory interneurons. The relative contributions of different interneuron subtypes to inhibitory tone during cortical network activity is not well understood. We previously showed that many of the major interneuron subtypes in mouse barrel cortex are highly active during Up states (Neske et al., 2015; while fast-spiking (FS, parvalbumin (PV-positive cells were the most active interneuron subtype, many non-fast-spiking (NFS, PV-negative interneurons were as active or more active than neighboring pyramidal cells. This suggests that the NFS cells could play a role in maintaining or modulating Up states. Here, using optogenetic techniques, we further dissected the functional roles during Up states of two major NFS, PV-negative interneuron subtypes: somatostatin (SOM-positive cells and vasoactive intestinal peptide (VIP-positive cells. We found that while pyramidal cell excitability during Up states significantly increased when SOM cells were optogenetically silenced, VIP cells did not influence pyramidal cell excitability either upon optogenetic silencing or activation. VIP cells failed to contribute to Up states despite their ability to inhibit SOM cells strongly. We suggest that the contribution of VIP cells to the excitability of pyramidal cells may vary with cortical state.

  18. Design and construction of a prototype to obtain TeO2

    International Nuclear Information System (INIS)

    Roque H, I.

    1997-01-01

    At the National Institute of Nuclear Research is developed the process to produce the radioisotope Iodine 131 which is employed in medicine with therapeutical purposes. The raw material to produce iodine 131 is tellurium dioxide (TeO 2 ). TeO 2 is intended to be produced from a prototype being this aim of this thesis named D esign and construction of a prototype to obtain TeO 2 . The TeO 2 obtained must have specific physicochemical characteristics, being necessary an special design of a prototype which will guarantee the quality of tellurium dioxide obtention. Design and building the final prototype project, was developed in to three stages. At the first stage, the TeO 2 was obtained at the laboratory, this allows to know the basic reaction characteristics. The second stage purpose, was to work with an former prototype which allowed to produce 100 g of tellurium dioxide. In the last stage a depurated chemical process parameters was made and the prototype was refined in regard to its mechanical design, giving us as result the final prototype. With this final prototype, the production reaches 2 Kg/week of tellurium dioxide with the best physicochemical properties which is to be employed as raw material in order to produce iodine 131. (Author)

  19. Optimizing Classroom Instruction through Self-Paced Learning Prototype

    Science.gov (United States)

    Bautista, Romiro G.

    2015-01-01

    This study investigated the learning impact of self-paced learning prototype in optimizing classroom instruction towards students' learning in Chemistry. Two sections of 64 Laboratory High School students in Chemistry were used as subjects of the study. The Quasi-Experimental and Correlation Research Design was used in the study: a pre-test was…

  20. Sporløs – Om biologi, identitet og slægten som fjernsyn [Find My Family - On biology, identity and kinship on television] Sporløs – Om biologi, identitet og slægten som fjernsyn

    Directory of Open Access Journals (Sweden)

    Birgitta Frello

    2011-12-01

    Full Text Available During recent years, the Danish public service television station (DR has launched several documentary serials that focus on kinship and genealogy. Genealogy makes ‘good TV’ because it enables an immediate identification with the protagonist of the programme. Furthermore, the protagonist’s personal story can function as a vehicle for telling other stories. However, the way kinship is depicted in the serials presupposes that a person’s knowledge about her biological kin equals knowledge about her personal identity. The article analyses the serial Find my Family (Danish: Sporløs, discussing the naturalisation of biological kin and the possible consequences of the conceptualisation of kinship that is taken for granted in the serial.DR har i de senere år lanceret flere programserier, som har slægt og slægtsforskning som fokus. Slægtsprogrammer er ’godt fjernsyn’ i den forstand, at de giver mulighed for en umiddelbar identifikation med hovedpersonen, samtidig med at dennes historie kan bruges som løftestang for andre historier. Imidlertid anlægger programmerne en vinkel på slægten, som forudsætter, at et øget kendskab til den biologiske slægt automatisk medfører et øget kendskab til den personlige identitet. Denne selvfølgeliggørelse af den biologiske slægts betydning problematiseres i artiklen, og med udgangspunkt i Sporløs diskuteres mulige implikationer og konsekvenser af den forståelse af slægten, som programmerne tager udgangspunkt i og tager for givet.

  1. Livsstil som tv-underholdning

    Directory of Open Access Journals (Sweden)

    Christa Lykke Christensen

    2008-09-01

    Full Text Available Livsstilsprogrammer har siden slutningen af 1990’erne domineret programfladen i den tidlige prime time på de danske public service-kanaler DR og TV 2. Dermed er emner, som figurerer i bl.a. magasiner og ugeblade, massivt rykket ind på tv’s sendeflade. Bolig, have, mad, ferie, krop og sundhed er indholdet i programmer, der både vil informere, give gode råd og underholde seerne. Artiklen fokuserer på underholdningsdimensionen i tre kategorier af livsstilsprogrammer og undersøger elementer, der kan tænkes at fremme motivationen for at se dem. Her lægges vægten på hhv. vidensperspektivets kompetenceaspekt og livsstilsbegrebets imaginative muligheder i relation til drømmen om ’det gode liv’ og ønsket om den forjættende forandring. Artiklen diskuterer endvidere, hvorledes public service-fjernsynet med disse livsstilsprogrammer har suppleret dets oplysende funktion med en opdaterende funktion, og hvordan dets tidligere kulturelt dannende funktion i kraft af disse programmers karakter af manual kan opfattes som en slags livsstilsguide i forhold til markedets forbrugsmuligheder. Lifestyle as TV entertainment Since the late 1990s lifestyle programmes have dominated early prime time on the Danish public service channels, DR and TV 2. For this reason topics that have traditionally figured in magazines extensively have entered television programming. House, garden, vacation, body, and health form the content of programmes which aim to both inform, advise and entertain viewers. The article primarily focuses on the aspects of entertainment in three main lifestyle categories and is concerned with elements that might promote viewers’ motivation for watching such programmes. Importance is attached to the competence aspect of knowledge and to the imaginative possibilities connected to the idea of lifestyle, related to daydreams, ideas of ‘the good life’, and a desire for promising change. Furthermore, the article discusses how public

  2. Livsstil som tv-underholdning

    Directory of Open Access Journals (Sweden)

    Christa Lykke Christensen

    2008-12-01

    Full Text Available Livsstilsprogrammer har siden slutningen af 1990’erne domineret programfladen i den tidlige prime time på de danske public service-kanaler DR og TV 2. Dermed er emner, som figurerer i bl.a. magasiner og ugeblade, massivt rykket ind på tv’s sendeflade. Bolig, have, mad, ferie, krop og sundhed er indholdet i programmer, der både vil informere, give gode råd og underholde seerne. Artiklen fokuserer på underholdningsdimensionen i tre kategorier af livsstilsprogrammer og undersøger elementer, der kan tænkes at fremme motivationen for at se dem. Her lægges vægten på hhv. vidensperspektivets kompetenceaspekt og livsstilsbegrebets imaginative muligheder i relation til drømmen om ’det gode liv’ og ønsket om den forjættende forandring. Artiklen diskuterer endvidere, hvorledes public service-fjernsynet med disse livsstilsprogrammer har suppleret dets oplysende funktion med en opdaterende funktion, og hvordan dets tidligere kulturelt dannende funktion i kraft af disse programmers karakter af manual kan opfattes som en slags livsstilsguide i forhold til markedets forbrugsmuligheder. Lifestyle as TV entertainment Since the late 1990s lifestyle programmes have dominated early prime time on the Danish public service channels, DR and TV 2. For this reason topics that have traditionally figured in magazines extensively have entered television programming. House, garden, vacation, body, and health form the content of programmes which aim to both inform, advise and entertain viewers. The article primarily focuses on the aspects of entertainment in three main lifestyle categories and is concerned with elements that might promote viewers’ motivation for watching such programmes. Importance is attached to the competence aspect of knowledge and to the imaginative possibilities connected to the idea of lifestyle, related to daydreams, ideas of ‘the good life’, and a desire for promising change. Furthermore, the article discusses how public

  3. BNL 56 MHz HOM Damper Prototype Fabrication at JLab

    Energy Technology Data Exchange (ETDEWEB)

    Huque, Naeem A. [Jefferson Lab., Newport News, VA (United States); Daly, Edward F. [Jefferson Lab., Newport News, VA (United States); Clemens, William A. [Jefferson Lab., Newport News, VA (United States); McIntyre, Gary T. [Brookhaven National Lab. (BNL), Upton, NY (United States); Wu, Qiong [Brookhaven National Lab. (BNL), Upton, NY (United States); Seberg, Scott [Brookhaven National Lab. (BNL), Upton, NY (United States); Bellavia, Steve [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-09-01

    A prototype Higher-Order Mode (HOM) Damper was fabricated at JLab for the Relativistic Heavy-Ion Collider's (RHIC) 56 MHz cavity at Brookhaven National Laboratory (BNL). Primarily constructed from high RRR Niobium and Sapphire, the coaxial damper presented significant challenges in electron-beam welding (EBW), brazing and machining via acid etching. The results of the prototype operation brought about changes in the damper design, due to overheating braze alloys and possible multi-pacting. Five production HOM dampers are currently being fabricated at JLab. This paper outlines the challenges faced in the fabrication process, and the solutions put in place.

  4. Proactive Review som læringsrum for online-ledere

    DEFF Research Database (Denmark)

    Kolbæk, Ditte

    2017-01-01

    . Kapitlet undersøger, hvordan online lederen kan lære af erfaringer skabt i hans/hendes online team. Kapitlet tager udgangspunkt i Engeströms virksomhedsteori og Proactive Review som praksisser for, hvordan ledere konkret kan lære sammen med deres team (Kolbæk 2011). Kapitlet udvikler en model for lederens...... læring på basis af ovenstående teorier. Da læring og kommunikation i teamet foregår online, er det nærliggende at benytte netnografi som metodisk tilgang. Kapitlet undersøger online lederens læringsrum i en global IT virksomhed, hvor Proactive Reviews er implementeret i flere end 40 lande......, at medarbejdere og ledere opholder sig i forskellige lande, og at de kun sjældent eller måske aldrig mødes fysisk, men altid samarbejder og kommunikerer online. Kapitlet kalder det online teams og online ledelse. Dette kapitel fokuserer på lederens læring i et læringsrum, hvor ledelse og samarbejde foregår online...

  5. A Computuerized Operator Support System Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lew, Roger [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ulrich, Tom [Idaho National Lab. (INL), Idaho Falls, ID (United States); Villim, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2013-11-01

    A report was published by the Idaho National Laboratory in September of 2012, entitled Design to Achieve Fault Tolerance and Resilience, which described the benefits of automating operator actions for transients. The report identified situations in which providing additional automation in lieu of operator actions would be advantageous. It recognized that managing certain plant upsets is sometimes limited by the operator’s ability to quickly diagnose the fault and to take the needed actions in the time available. Undoubtedly, technology is underutilized in the nuclear power industry for operator assistance during plant faults and operating transients. In contrast, other industry sectors have amply demonstrated that various forms of operator advisory systems can enhance operator performance while maintaining the role and responsibility of the operator as the independent and ultimate decision-maker. A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. The COSS does not supplant the role of the operator, but rather provides rapid assessments, computations, and recommendations to reduce workload and augment operator judgment and decision-making during fast-moving, complex events. This project proposes a general model for a control room COSS that addresses a sequence of general tasks required to manage any plant upset: detection, validation, diagnosis, recommendation, monitoring, and recovery. The model serves as a framework for assembling a set of technologies that can be interrelated to assist with each of these tasks. A prototype COSS has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based

  6. A Computuerized Operator Support System Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lew, Roger [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ulrich, Tom [Idaho National Lab. (INL), Idaho Falls, ID (United States); Villim, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2013-08-01

    A report was published by the Idaho National Laboratory in September of 2012, entitled Design to Achieve Fault Tolerance and Resilience, which described the benefits of automating operator actions for transients. The report identified situations in which providing additional automation in lieu of operator actions would be advantageous. It recognized that managing certain plant upsets is sometimes limited by the operator’s ability to quickly diagnose the fault and to take the needed actions in the time available. Undoubtedly, technology is underutilized in the nuclear power industry for operator assistance during plant faults and operating transients. In contrast, other industry sectors have amply demonstrated that various forms of operator advisory systems can enhance operator performance while maintaining the role and responsibility of the operator as the independent and ultimate decision-maker. A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. The COSS does not supplant the role of the operator, but rather provides rapid assessments, computations, and recommendations to reduce workload and augment operator judgment and decision-making during fast-moving, complex events. This project proposes a general model for a control room COSS that addresses a sequence of general tasks required to manage any plant upset: detection, validation, diagnosis, recommendation, monitoring, and recovery. The model serves as a framework for assembling a set of technologies that can be interrelated to assist with each of these tasks. A prototype COSS has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based

  7. Bærme (DDGS) som proteinfoder til malkekøer

    DEFF Research Database (Denmark)

    Sehested, Jakob; Sørensen, Martin Tang; Weisbjerg, Martin Riis

    2015-01-01

    DDGS er et proteinrigt fodermiddel fra produktionen af bio-etanol baseret på korn og majs, og det forventes på markedet i stigende mængder. Kornbaseret DDGS kan være et godt proteinfoder som uden negativ effekt på mælkeproduktion eller -kvalitet kan indgå med 15 % af rationens tørstof og kan...

  8. How the type of pyrogenic organic matter determines the SOM quality in amended soils

    Science.gov (United States)

    Merino, Agustin; Gartzia-Bengoetxea, Nahia; Morangues, Lur; Arias-Gonzalez, Ander

    2016-04-01

    Charred biomass can be used as an organic amendment and to enhance the C sink capacity of soils. There are two types of by-products containing pyrogenic OM that could be used to improve in agricultural or forestry, biochar and wood ash. Due to their different heating conditions under which it is produced (pyrolysis, combustion and different temperatures, feedstocks,..), the properties of this pyrogenic OM might be highly variable, which could affect the SOM quality and the C sink capacity of the amended soil. The purpose of this study was to assess how SOM quality is influenced by pyrogenic organic matter with different degree of carbonization. Biochar and bottom wood ash were added to two Atlantic forest soils (Pinus radiata, 12 °C, 1200 mm) with different texture, clayey loam and sandy loam. The experiment consisted in a randomized block trials, in which different doses of biochar (0, 3, 9, 18 Mh ha-1) and wood ash (0, 1.5, 4.5, and 9 Mg ha-1) were added. The Biochar applied (pH: 9.8; C: 87 %) was produced by the pyrolysis of Myscanthus sp. at 450°C in a Pyreg® pyrolysis unit. The bottom wood ash (pH: 10.6; C: 30 %) was produced by combustion in a biomass power plant. The aromatization/carbonization was lightly higher in biochar than in wood ash. This latter by-product, in addition to the black carbon, it also contained mineral ash, as well as unburnt or lightly charred plant biomass. The evolution of soil chemical and SOM properties were monitored over three years by solid state Differential Scanning Calorimetry (DSC) and 13C CPMAS NMR. These techniques were applied in bulk samples and also in fractions of different densityes. The changes in microbial activity were studied by analysis of microbial biomass C and basal respiration and soil microbial community. Three years after applications the SOM content increased lightly in the treatment receiving the highest doses of biochar and wood ash, specially in the clay loam soil. SOM in the treated soils displayed a

  9. Physics design and scaling of recirculating induction accelerators: from benchtop prototypes to drivers

    International Nuclear Information System (INIS)

    Barnard, J.J.; Cable, M.D.; Callahan, D.A.

    1996-01-01

    Recirculating induction accelerators (recirculators) have been investigated as possible drivers for inertial fusion energy production because of their potential cost advantage over linear induction accelerators. Point designs were obtained and many of the critical physics and technology issues that would need to be addressed were detailed. A collaboration involving Lawrence Livermore National Laboratory and Lawrence Berkeley National Laboratory researchers is now developing a small prototype recirculator in order to demonstrate an understanding of nearly all of the critical beam dynamics issues that have been raised. We review the design equations for recirculators and demonstrate how, by keeping crucial dimensionless quantities constant, a small prototype recirculator was designed which will simulate the essential beam physics of a driver. We further show how important physical quantities such as the sensitivity to errors of optical elements (in both field strength and placement), insertion/extraction, vacuum requirements, and emittance growth, scale from small-prototype to driver-size accelerator

  10. Aespoe Hard Rock Laboratory. Prototype Repository. Acoustic emission and ultrasonic monitoring results from deposition hole DA3545G01 in the Prototype Repository between April 2008 and September 2008

    Energy Technology Data Exchange (ETDEWEB)

    Duckworth, D.; Haycox, J.; Pettitt, W.S. (Applied Seismology Consultants, Shrewsbury (United Kingdom))

    2009-03-15

    This report describes results from acoustic emission (AE) and ultrasonic monitoring around a canister deposition hole (DA3545G01) in the Prototype Repository Experiment at SKB's Hard Rock Laboratory (HRL), Sweden. The monitoring aims to examine changes in the rock mass caused by an experimental repository environment, in particular due to thermal stresses induced from canister heating and pore pressures induced from tunnel sealing. Monitoring of this volume has previously been performed during excavation [Pettitt et al., 1999], and during stages of canister heating and tunnel pressurisation [Haycox et al., 2005a and 2005b; Haycox et al., 2006a and 2006b; Zolezzi et al., 2007 and Duckworth et al., 2008]. Further information on this monitoring can be found in Appendix I. This report covers the period between 1st April 2008 and 30th September 2008 and is the seventh instalment of the 6-monthly processing and interpretation of the results from the experiment.

  11. Aespoe Hard Rock Laboratory. Prototype Repository. Acoustic emission and ultrasonic monitoring results from deposition hole DA3545G01 in the Prototype Repository between April 2008 and September 2008

    International Nuclear Information System (INIS)

    Duckworth, D.; Haycox, J.; Pettitt, W.S.

    2009-03-01

    This report describes results from acoustic emission (AE) and ultrasonic monitoring around a canister deposition hole (DA3545G01) in the Prototype Repository Experiment at SKB's Hard Rock Laboratory (HRL), Sweden. The monitoring aims to examine changes in the rock mass caused by an experimental repository environment, in particular due to thermal stresses induced from canister heating and pore pressures induced from tunnel sealing. Monitoring of this volume has previously been performed during excavation [Pettitt et al., 1999], and during stages of canister heating and tunnel pressurisation [Haycox et al., 2005a and 2005b; Haycox et al., 2006a and 2006b; Zolezzi et al., 2007 and Duckworth et al., 2008]. Further information on this monitoring can be found in Appendix I. This report covers the period between 1st April 2008 and 30th September 2008 and is the seventh instalment of the 6-monthly processing and interpretation of the results from the experiment

  12. Impact of Fe(III)-OM complexes and Fe(III) polymerization on SOM pools reactivity under different land uses

    Science.gov (United States)

    Giannetta, B.; Plaza, C.; Zaccone, C.; Siebecker, M. G.; Rovira, P.; Vischetti, C.; Sparks, D. L.

    2017-12-01

    Soil organic matter (SOM) protection and long-term accumulation are controlled by adsorption to mineral surfaces in different ways, depending on its molecular structure and pedo-climatic conditions. Iron (Fe) oxides are known to be key regulators of the soil carbon (C) cycle, and Fe speciation in soils is highly dependent on environmental conditions and chemical interactions with SOM. However, the molecular structure and hydrolysis of Fe species formed in association with SOM is still poorly described. We hypothesize the existence of two pools of Fe which interact with SOM: mononuclear Fe(III)-SOM complexes and precipitated Fe(III) hydroxides. To verify our hypothesis, we investigated the interactions between Fe(III) and physically isolated soil fractions by means of batch experiments at pH 7. Specifically, we examined the fine silt plus clay (FSi+C) fraction, obtained by ultrasonic dispersion and wet sieving. The soil samples spanned several land uses, including coniferous forest (CFS), grassland (GS), technosols (TS) and agricultural (AS) soils. Solid phase products and supernatants were analyzed for C and Fe content. X-ray diffraction (XRD) and Brunauer-Emmett-Teller (BET) analysis were also performed. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) was used to assess the main C functional groups involved in C complexation and desorption experiments. Preliminary linear combination fitting (LCF) of Fe K-edge extended X-ray absorption fine structure (EXAFS) spectra suggested the formation of ferrihydrite-like polymeric Fe(III) oxides in reacted CFS and GS samples, with higher C and Fe concentration. Conversely, mononuclear Fe(III) OM complexes dominated the speciation for TS and AS samples, characterized by lower C and Fe concentration, inhibiting the hydrolysis and polymerization of Fe (III). This approach will help revealing the mechanisms by which SOM pools can control Fe(III) speciation, and will elucidate how both Fe

  13. Feature combination analysis in smart grid based using SOM for Sudan national grid

    Science.gov (United States)

    Bohari, Z. H.; Yusof, M. A. M.; Jali, M. H.; Sulaima, M. F.; Nasir, M. N. M.

    2015-12-01

    In the investigation of power grid security, the cascading failure in multicontingency situations has been a test because of its topological unpredictability and computational expense. Both system investigations and burden positioning routines have their limits. In this project, in view of sorting toward Self Organizing Maps (SOM), incorporated methodology consolidating spatial feature (distance)-based grouping with electrical attributes (load) to evaluate the vulnerability and cascading impact of various part sets in the force lattice. Utilizing the grouping result from SOM, sets of overwhelming stacked beginning victimized people to perform assault conspires and asses the consequent falling impact of their failures, and this SOM-based approach viably distinguishes the more powerless sets of substations than those from the conventional burden positioning and other bunching strategies. The robustness of power grids is a central topic in the design of the so called "smart grid". In this paper, to analyze the measures of importance of the nodes in a power grid under cascading failure. With these efforts, we can distinguish the most vulnerable nodes and protect them, improving the safety of the power grid. Also we can measure if a structure is proper for power grids.

  14. Autobalancing and FDIR for a space-based centrifuge prototype

    Science.gov (United States)

    Wilson, Edward; Mah, Robert W.

    2005-01-01

    This report summarizes centrifuge-related work performed at the Smart Systems Research Laboratory at NASA Ames Research Center's Computational Sciences Division from 1995 through 2003. The goal is to develop an automated system that will sense an imbalance (both static and dynamic3) in a centrifuge and issue control commands to drive counterweights to eliminate the effects of the imbalance. This autobalancing development began when the ISS centrifuge design was not yet finalized, and was designed to work with the SSRL Centrifuge laboratory prototype, constructed in 1993-1995. Significant differences between that prototype and the current International Space Station (ISS) Centrifuge design are that: the spin axis for the SSRL Centrifuge prototype can translate freely in x and y, but not wobble, whereas the ISS centrifuge spin axis has 3 translational and two rotational degrees of freedom, supported by a vibration 34. The imbalance sensors are strained gauges both in the rotor and the stator, measuring the imbalance forces, whereas the ISS centrifuge uses eddy current displacement sensors to measure the displacements resulting from imbalance. High fidelity autobalancing and FDIR systems (for both counterweights and strain gauges) are developed and tested in MATLAB simulation, for the SSRL Centrifuge configuration. Hardware implementation of the autobalancing technology was begun in 1996, but was terminated due to lack of funding. The project lay dormant until 2001-2002 when the FDIR capability was added.

  15. Architectural prototyping

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2004-01-01

    A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders...

  16. Specialestuderendes læringsudfordringer i vejledningen - nudging som handlemulighed

    DEFF Research Database (Denmark)

    Jensen, Hanne Nexø; Juul Jensen, Christina

    2015-01-01

    teoretiske afsæt er generiske læringsudfordringer i vejledningsprocesser, hvor læring opstår, når de studerende passerer en læringsudfordring. Vejledere kan bruge forståelsen af læringsudfordringer til at ”nudge”- plante en idé – som en måde at få studerende til at passere læringsudfordringerne....

  17. Rapid Turn-Around Flight Testing of a Next-Generation Prototype RNLV (Preprint)

    National Research Council Canada - National Science Library

    Garvey, John M; Besnard, Eric

    2008-01-01

    ...) with an earlier prototype RNLV first stage (the Prospector 7) that was developed under a Phase I SBIR sponsored by the Air Force Research Laboratory - Propulsion Directorate with support from the Air...

  18. Pædagogiske læreplaner som redskab til evaluering, læring og kvalitetsudvikling?

    Directory of Open Access Journals (Sweden)

    Poul Skov Dahl

    2016-02-01

    Full Text Available Den nyligt afsluttede, landsdækkende evaluering af loven om pædagogiske læreplaner har vist, at pædagogiske læreplaner indtil nu har været en faglig succes i dagtilbuddene. Men den viser også, at evalueringsarbejdet endnu spiller en begrænset rolle i arbejdet. Hvis de pædagogiske læreplaner fremadrettet skal forblive en succes og medvirke til at udvikle den pædagogiske praksis, er evalueringskapacitet et vigtigt omdrejningspunkt. Med systematisk evaluering som en integreret del af arbejdet med de pædagogiske læreplaner har de - som en form for ”systemtænknings-redskab -” potentiale til at være løftestang for organisatorisk læring i dagtilbuddet - den læring, som er en forudsætning for kvalitetsudviklingen af den pædagogiske praksis. Vi sætter i denne artikel fokus på sammenhængen mellem pædagogiske læreplaner, evaluering og organisatorisk læring i dagtilbuddene.

  19. Empowerment som frigørelse?

    DEFF Research Database (Denmark)

    Andersen, Pernille Tanggaard

    2010-01-01

    Empowerment er et at tidens modeord, og sættes i forbindelse med vidt forskellige termer eksempelvis personlighedsudvikling, borgerinddragelse og styringsideologi. Begrebet empowerment rummer efterhånden så mange betydninger, at man kan diskuterer selve essensen – i dette kapitel gøres dog et...... forsøg og forskellige dele af begrebet udfoldes. Direkte oversat betyder empowermemt at bemyndige eller sætter i stand til. Empowerment er et ofte anvendt begreb indenfor sundhedsvidenskab og i tilrettelæggelse af sundhedsfremmende initiativer. Begrebet bliver ofte defineret og benyttet forskelligt alt...... efter det bagvedliggende ideologiske perspektiv, og derfor er udgangspunktet i dette kapitel også at illustrerer forskellige ”blikke på empowerment”. Derudover inddrages to eksempler; studier af lokalsamfund og borgerinddragelse og ’den motiverende samtale’ som illustration på, hvilke udfordringer, der...

  20. Med øjeblikket som udgangspunkt

    DEFF Research Database (Denmark)

    Bo, Inger Glavind

    Artiklen er motiveret af, at Meads temporale analyser tilsyneladende ikke har fået den plads og opmærksomhed, de fortjener, og formålet er at argumentere for, at disse er afgørende for forståelsen af helt centrale aspekter i hans tænkning. Meads udgangspunkt for sin analyse af temporalitet er en...... perspektiv på identitet og social interaktion i hans socialpsykologi. Denne artikels formål er således dobbelt og er for det første at præsentere og diskutere Meads temporale perspektiv som en relevant indgang og nøgle til hans socialpsykologi og sideløbende hermed for det andet at argumentere for, at de...... temporale analyser er centrale for at få greb om Meads genialitet....

  1. Det retlige sprog som virkelighedsskabende - graviditetsvært kontra surrogatmoder

    DEFF Research Database (Denmark)

    Pedersen, Frank Høgholm

    2018-01-01

    I dag er det undtagelsen, at kvinden, der bærer graviditeten og føder barnet i et surrogati-arrangement, er genetisk relateret til barnet. I artiklen foreslås som en supplerende betegnelse til surrogatmoder derfor betegnelsen: graviditetsvært. Valget af en retlig betegnelse til beskrivelse af fak...

  2. Yrkesforberedelse eller fagopplæring med fagbrev? Med design og håndverk som kontekst

    Directory of Open Access Journals (Sweden)

    Bjørn Magne Aakre

    2013-09-01

    Full Text Available Artikkelen drøfter forholdet mellom yrkesforberedelse og fagopplæring med utgangspunkt i den kombinerte studieretningen formgivingsfag som ble innført i Norge i 1994. I 2006 ble den delt i et programfag under studiespesialiserende fag, og et nytt yrkesfaglig program med betegnelse design og håndverk. Hvilke interesser lå til grunn for endringene, hvor dyptgripende ble de og hvilke overveieleser kan en gjøre i ettertid om forholdet mellom yrkesforberedelse og fagopplæring? Artikkelen søker å svare på spørsmålene ut fra relevante dokumenter og to kvantitative undersøkelser med elever og lærere som informanter. Artikkelen konkluderer med at innholdet forble nokså likt, antall elever ble halvert og at frafallet økte. Det konkluderes videre med at mange forhold bidrar til å legitimere et fag og dets innhold som henholdsvis skolefag, vitenskapsfag eller yrkesfag. Legitimeringen preges ofte av motstridende motiver og interesser, og sjelden bare faglige begrunnelser.

  3. Litteraturarbete i ett svenska som andraspråksklassrum

    Directory of Open Access Journals (Sweden)

    Catarina Economou

    2015-06-01

    Full Text Available AbstractThis article considers the role of reading fiction in Swedish as a second language instruction. The study examines how a group of advanced second language learners in a Swedish upper secondary school read, interpret and discuss a contemporary Swedish novel, how they interact with the text and with each other in relation to the text. Furthermore, it analyses which forms of reading the students use. It is a qualitative, empirical study based on field studies, transcriptions of tape recorded interaction and of written texts. The results indicate that second language learners in this context have a positive attitude towards reading and discussing what they read using several forms of reading. They often compare the content of the text to their own lives. One conclusion is that literature teaching and literature can be integrated into one Swedish subject in order to create even more meaningful interactions between students from different backgrounds. Another is that literature can be a means of language development as well as personal development.Keywords: Second language learners, literature pedagogy and didactics, forms of reading, democracy. SammandragDenna artikel handlar om skönlitteraturens roll i skolämnet svenska som andraspråk. Studien undersöker hur en grupp avancerade andraspråksinlärare i en svensk gymnasieskola läser, tolkar och diskuterar en modern svensk roman och hur de interagerar med texten och med varandra i relation till texten. Dessutom analyseras vilka läsarter som eleverna använde sig av. Den är en kvalitativ, empirisk studie som baseras på fältstudier, transkriptioner av inspelade boksamtal och elevtexter. Resultaten visar att andraspråkseleverna hade en positiv attityd till boksamtal och de använde sig av flera läsarter. De jämförde ofta texten till sina egna liv och erfarenheter.  En slutsats är att litteraturundervisning och litteraturarbete skulle kunna integreras i ett gemensamt ämne så att

  4. Faktorer som förklarar miljövänligt beteende hos unga vuxna

    OpenAIRE

    Rikner, Amanda

    2009-01-01

    Människors miljörelaterade beteenden behöver förbättras. I studien undersöktes unga vuxna universitetsstuderandes syn på klimatproblematiken. En enkät delades ut som mätte miljövänligt beteende, ansvarskänsla, tillit till forskning, upplevelse av att kunna påverka och kunskap när det gäller klimatproblematiken. Deltagarna fick också beskriva anledningar som möjliggör eller förhindrar en förbättring av klimatproblematiken. Deltog gjorde 97 personer. Resultatet visade på signifikanta samband me...

  5. BIM som Informationsbärare in i Förvaltningen : En studie vid Forsmarks Kraftgrupp

    OpenAIRE

    Svens, Therése

    2013-01-01

    BIM, Building Information Modeling, börjar vinna mark inom byggbranschen i Sverige och är en vedertagen process i vart och vartannat byggprojekt. Forsmarks Kraftgrupp står inför både upprustningar av sina anläggningar och nyproduktion av bland annat kontor, verkstad och hotell. BIM framstår nu som en lukrativ metod för att dra ner på projektkostnaderna, men även för att få ytterligare ordning och struktur på den enorma mängd dokumentation som ackumulerat under de dryga trettio åren av drift. ...

  6. Nightshade Prototype Experiments (Silverleaf)

    Energy Technology Data Exchange (ETDEWEB)

    Danielson, Jeremy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bauer, Amy L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-12-23

    The Red Sage campaign is a series of subcritical dynamic plutonium experiments designed to measure ejecta. Nightshade, the first experiments in Red Sage scheduled for fiscal year 2019, will measure the amount of ejecta emission into vacuum from a double-­shocked plutonium surface. To address the major technical risks in Nightshade, a Level 2 milestone was developed for fiscal year 2016. Silverleaf, a series of four experiments, was executed at the Los Alamos National Laboratory in July and August 2016 to demonstrate a prototype of the Nightshade package and to satisfy this Level 2 milestone. This report is documentation that Red Sage Level 2 milestone requirements were successfully met.

  7. Forskeres arbejde med oplevelser af børns tegninger som forskningsmetode

    DEFF Research Database (Denmark)

    Nielsen, Anne Maj

    2012-01-01

    , experiences, intentions and engagement that may be difficult to articulate verbally. Research can include children’s art and drawings to study phenomena such as children’s feelings, emotions, experiences, intentions and engagements. Transparency of the ways in which art and drawings in specific ways...... at gøre rede for hvordan forskerens sanselige og æstetiske oplevelser af børns tegninger kan gøres transparente ved at tegninger betragtes som ’æstetiske objekter’ som led i forskningsprocessen. In art and drawing children can visually express phenomena in their mind such as feelings, emotions...... contribute to knowledge is a challenge in research. The aim of this article is to describe and discuss how the construct ‘aesthetic object’ may offer researchers an approach to children’s art and drawings that can explicitly include the researcher’s sensory and aesthetic experiences as knowledge....

  8. Betyder modellering det samme i naturfag som i matematik?

    DEFF Research Database (Denmark)

    Ejersbo, Lisser Rye

    2014-01-01

    Med de nye målformuleringer og læseplaner bruges udtrykket modellering nu både indenfor naturfag og matematik. Matematiklærere, som er vant til at arbejde med modellering tror måske, at det betyder det samme begge steder, men det behøver slet ikke at være tilfældet. Måske vi trænger til en...

  9. Using Self-Organizing Map (SOM) Clusters of Ozonesonde Profiles to Evaluate Climatologies and Create Linkages between Meteorology and Pollution

    Science.gov (United States)

    Stauffer, R. M.; Thompson, A. M.; Young, G. S.; Oltmans, S. J.; Johnson, B.

    2016-12-01

    Ozone (O3) climatologies are typically created by averaging ozonesonde profiles on a monthly or seasonal basis, either for specific regions or zonally. We demonstrate the advantages of using a statistical clustering technique, self-organizing maps (SOM), over this simple averaging, through analysis of more than 4500 sonde profiles taken from the long-term US sites at Boulder, CO; Huntsville, AL; Trinidad Head, CA; and Wallops Island, VA. First, we apply SOM to O3 mixing ratios from surface to 12 km amsl. At all four sites, profiles in SOM clusters exhibit similar tropopause height, 500 hPa height and temperature, and total and tropospheric column O3. Second, when profiles from each SOM cluster are compared to monthly O3 means, near-tropopause O3 in three of the clusters is double (over +100 ppbv) the climatological O3 mixing ratio. The three clusters include 13-16% of all profiles, mostly from winter and spring. Large mid-tropospheric deviations from monthly means are found in two highly-populated clusters that represent either distinctly polluted (summer) or clean O3 (fall-winter, high tropopause) profiles. Thus, SOM indeed appear to represent US O3 profile statistics better than conventional climatologies. In the case of Trinidad Head, SOM clusters of O3 profile data from the lower troposphere (surface-6 km amsl) can discriminate background vs polluted O3 and the meteorology associated with each. Two of nine O3 clusters exhibit thin layers ( 100s of m thick) of high O3, typically between 1 and 4 km. Comparisons between clusters and downwind, high-altitude surface O3 measurements display a marked impact of the elevated tropospheric O­­3. Days corresponding to the high O3 clusters exhibit hourly surface O3 anomalies at surface sites of +5 -10 ppbv compared to a climatology; the anomalies can last up to four days. We also explore applications of SOM to tropical ozonesonde profiles, where tropospheric O3 variability is generally smaller.

  10. Prototyping Practice

    DEFF Research Database (Denmark)

    Ramsgaard Thomsen, Mette; Tamke, Martin

    2015-01-01

    This paper examines the role of the prototyping in digital architecture. During the past decade, a new research field has emerged exploring the digital technology’s impact on the way we think, design and build our environment. In this practice the prototype, the pavilion, installation or demonstr......This paper examines the role of the prototyping in digital architecture. During the past decade, a new research field has emerged exploring the digital technology’s impact on the way we think, design and build our environment. In this practice the prototype, the pavilion, installation...

  11. Multi-digit handwritten sindhi numerals recognition using som neural network

    International Nuclear Information System (INIS)

    Chandio, A.A.; Jalbani, A.H.; Awan, S.A.

    2017-01-01

    In this research paper a multi-digit Sindhi handwritten numerals recognition system using SOM Neural Network is presented. Handwritten digits recognition is one of the challenging tasks and a lot of research is being carried out since many years. A remarkable work has been done for recognition of isolated handwritten characters as well as digits in many languages like English, Arabic, Devanagari, Chinese, Urdu and Pashto. However, the literature reviewed does not show any remarkable work done for Sindhi numerals recognition. The recognition of Sindhi digits is a difficult task due to the various writing styles and different font sizes. Therefore, SOM (Self-Organizing Map), a NN (Neural Network) method is used which can recognize digits with various writing styles and different font sizes. Only one sample is required to train the network for each pair of multi-digit numerals. A database consisting of 4000 samples of multi-digits consisting only two digits from 10-50 and other matching numerals have been collected by 50 users and the experimental results of proposed method show that an accuracy of 86.89% is achieved. (author)

  12. DOE's annealing prototype demonstration projects

    International Nuclear Information System (INIS)

    Warren, J.; Nakos, J.; Rochau, G.

    1997-01-01

    One of the challenges U.S. utilities face in addressing technical issues associated with the aging of nuclear power plants is the long-term effect of plant operation on reactor pressure vessels (RPVs). As a nuclear plant operates, its RPV is exposed to neutrons. For certain plants, this neutron exposure can cause embrittlement of some of the RPV welds which can shorten the useful life of the RPV. This RPV embrittlement issue has the potential to affect the continued operation of a number of operating U.S. pressurized water reactor (PWR) plants. However, RPV material properties affected by long-term irradiation are recoverable through a thermal annealing treatment of the RPV. Although a dozen Russian-designed RPVs and several U.S. military vessels have been successfully annealed, U.S. utilities have stated that a successful annealing demonstration of a U.S. RPV is a prerequisite for annealing a licensed U.S. nuclear power plant. In May 1995, the Department of Energy's Sandia National Laboratories awarded two cost-shared contracts to evaluate the feasibility of annealing U.S. licensed plants by conducting an anneal of an installed RPV using two different heating technologies. The contracts were awarded to the American Society of Mechanical Engineers (ASME) Center for Research and Technology Development (CRTD) and MPR Associates (MPR). The ASME team completed its annealing prototype demonstration in July 1996, using an indirect gas furnace at the uncompleted Public Service of Indiana's Marble Hill nuclear power plant. The MPR team's annealing prototype demonstration was scheduled to be completed in early 1997, using a direct heat electrical furnace at the uncompleted Consumers Power Company's nuclear power plant at Midland, Michigan. This paper describes the Department's annealing prototype demonstration goals and objectives; the tasks, deliverables, and results to date for each annealing prototype demonstration; and the remaining annealing technology challenges

  13. Remote maintenance lessons learned on prototypical reprocessing equipment

    International Nuclear Information System (INIS)

    Kring, C.T.; Schrock, S.L.

    1990-01-01

    A major objective of the Consolidated Fuel Reprocessing Program at the Oak Ridge National Laboratory is to develop and demonstrate the technology required to reprocess spent nuclear fuel. The Fuel Recycle Division, over the past 16 years, has undertaken this objective by designing and testing prototypical hardware representing essentially every major equipment item currently included in most fuel reprocessing plant conceptual designs. These designs are based on total remote maintenance to increase plant availability and reduce radiation exposure to plant operators. The designs include modular equipment to facilitate maintainability and the remote manipulation necessary to accomplish maintenance tasks. Prototypic equipment has been installed and tested in a cold mock-up of a reprocessing hot cell, called the remote operations and maintenance demonstration facility. The applied maintenance concept utilizes the dexterity and mobility of bridge-mounted, force-reflecting servomanipulators. Prototypic processing equipment includes a remote disassembly system, a remote shear system, a rotary dissolver, a remote automated sampler system, removable equipment racks to support chemical process equipment items, and the advanced servomanipulators. Each of these systems and a brief description of functions are discussed

  14. Minihusfellesskap som verkemiddel i stadsutvikling av Undredal

    OpenAIRE

    Underdal, Brita

    2017-01-01

    Små bygdesamfunn i Noreg slit med nedgang i folketalet, og det går ut over utvikling, handel og trivsel hjå dei som vert verande i bygda. I verste fall blir bygdene heilt fråflytta, husa forfell og naturressursane går til spille. Dette kan vere framtidsbiletet til Undredal om ikkje noko vert gjort. På 20 år har folketalet gått ned frå 130 innbyggjarar til 70. Dersom utviklinga ikkje stagnerer, vil bygda snart vere tom for fastbuande. Oppgåva stiller difor spørsmålet: Korleis kan ein auk...

  15. Comparative Study of Laboratory-Scale and Prototypic Production-Scale Fuel Fabrication Processes and Product Characteristics

    International Nuclear Information System (INIS)

    Marshall, Douglas W.

    2014-01-01

    An objective of the High Temperature Gas Reactor fuel development and qualification program for the United States Department of Energy has been to qualify fuel fabricated in prototypic production-scale equipment. The quality and characteristics of the tristructural isotropic (TRISO) coatings on fuel kernels are influenced by the equipment scale and processing parameters. The standard deviations of some TRISO layer characteristics were diminished while others have become more significant in the larger processing equipment. The impact on statistical variability of the processes and the products, as equipment was scaled, are discussed. The prototypic production-scale processes produce test fuels meeting all fuel quality specifications. (author)

  16. Esplenectomia subtotal para tratamento do hipodesenvolvimento somático e sexual secundário a esplenomegalia

    Directory of Open Access Journals (Sweden)

    Andy Petroianu

    Full Text Available OBJETIVO: "Nanismo esplênico" é condição clínica decorrente de processo imunitário relacionado ao baço e tem como tratamento preconizado a esplenectomia total. Seguindo uma linha de pesquisa voltada ao estudo da esplenectomia subtotal em diferentes afecções, o objetivo do presente trabalho foi avaliar o crescimento somático de pacientes portadores deste hipodesenvolvimento esplenomegálico, submetidos à esplenectomia subtotal com preservação do pólo superior esplênico irrigado apenas pelos vasos esplenogástricos. MÉTODO: Quatro pacientes masculinos (14, 14, 16 e 17 anos com esplenomegalia (três de etiologia esquistossomática e um com cirrose auto-imune e retardo do desenvolvimento somático e sexual foram submetidos à esplenectomia subtotal. As indicações para cirurgia foram sangramento de varizes do esôfago e pancitopenia. RESULTADOS: Em todos os casos houve retomada do crescimento e após um ano eles já se encontravam dentro da faixa de desenvolvimento somático e sexual compatível com a idade. CONCLUSÃO: O hipodesenvolvimento esplenomegálico não é decorrente da presença do baço, mas de seu crescimento; a esplenectomia subtotal é um procedimento adequado para tratar o retardo de desenvolvimento somático e sexual por esplenomegalia.

  17. Sundhed som tema på den pædagogiske dagsorden

    DEFF Research Database (Denmark)

    Pedersen, Ulla; Schulz, Anette

    2015-01-01

    Dagtilbud og skole fremhæves i de nationale mål for danskernes sundhed som vigtige indsatsmiljøer (Regeringen, 2014). I dette kapitel berøres indledningsvist dagtilbuddets og skolens sundhedsfremmende rolle. Herefter præsenteres en række cases, hvor to faktorer har været særligt afgørende for at ...

  18. Manufacturing implant supported auricular prostheses by rapid prototyping techniques.

    Science.gov (United States)

    Karatas, Meltem Ozdemir; Cifter, Ebru Demet; Ozenen, Didem Ozdemir; Balik, Ali; Tuncer, Erman Bulent

    2011-08-01

    Maxillofacial prostheses are usually fabricated on the models obtained following the impression procedures. Disadvantages of conventional impression techniques used in production of facial prosthesis are deformation of soft tissues caused by impression material and disturbance of the patient due to. Additionally production of prosthesis by conventional methods takes longer time. Recently, rapid prototyping techniques have been developed for extraoral prosthesis in order to reduce these disadvantages of conventional methods. Rapid prototyping technique has the potential to simplify the procedure and decrease the laboratory work required. It eliminates the need for measurement impression procedures and preparation of wax model to be performed by prosthodontists themselves In the near future this technology will become a standard for fabricating maxillofacial prostheses.

  19. Macro Micro Studio: A Prototype Energy Autonomous Laboratory

    Directory of Open Access Journals (Sweden)

    Neil Burford

    2016-05-01

    Full Text Available In 2011, the Departments of Architecture, Physics and Engineering began the development of a small Passivhaus standard, renewable energy self-sufficient studio at the University Botanical Gardens in Dundee. The prototype was conceived as an experimental, integrated technical platform to monitor the performance of an ultra-low-energy consumption, energy positive building in the Scottish climate, and understand user behaviour in relation to managing energy in-use and reducing occupant’s energy consumption. The building fabric has been constructed using regional sustainable materials, including a low-thermal bridging timber kit relying on Scottish small cross-section timber and a novel foam concrete (air entrained slab foundation. While further work is required to complete the installation of the renewable energy system, predictive modelling indicates that energy autonomy can be largely achieved. With the recent introduction of the new Passivhaus 2009 criteria in October 2015, this project provides an insight into the practical application of an autarkic energy system in a northern European climate. The following paper describes the research rationale, the processes and decision making in the development of the formal and technical design of the building and discusses our current thinking in the design and quantification of the energy system.

  20. Det moderne projekt – og portfolioen som en af mange succesteknologier

    DEFF Research Database (Denmark)

    Helms, Niels Henrik

    2010-01-01

    I artiklen diskuteres portfolioen i lyset af den canadiske fi losof Taylors begreber om rationel selvkontrol og ekspressiv artikulering som forskellige udtryk for det moderne. En række pædagogiske succesteknologier problematiseres og afsluttende foreslås en kommunitarisk forståelse af det...

  1. Praksisnær skoleudvikling og PLC som strategisk udviklingsaktør

    DEFF Research Database (Denmark)

    Christensen, Ole; Bach, Anna

    2017-01-01

    I det følgende belyses, hvorledes PLC kan udvikles som strategisk udviklingsaktør og understøtte praksisnær skoleudvikling. Vi ønsker at belyse hvorledes Bekendtgørelsens overordnede intentioner kan få retning og rammer og dermed medvirke til, at hele det pædagogiske personale indgår i skoleudvik......I det følgende belyses, hvorledes PLC kan udvikles som strategisk udviklingsaktør og understøtte praksisnær skoleudvikling. Vi ønsker at belyse hvorledes Bekendtgørelsens overordnede intentioner kan få retning og rammer og dermed medvirke til, at hele det pædagogiske personale indgår i...... skoleudviklingen. I den forbindelse er det vores erfaring, at PLC kan spille en central rolle i forbindelse med den praksisnære og lokale skoleudvikling. Erfaringerne bygger især på udviklings- og forskningsprojekter fra kommunerne Kolding, København, Roskilde og Tårnby. Der har været tale om praksisnære...

  2. CLUSTER ANALYSIS UNTUK MEMPREDIKSI TALENTA PEMAIN BASKET MENGGUNAKAN JARINGAN SARAF TIRUAN SELF ORGANIZING MAPS (SOM

    Directory of Open Access Journals (Sweden)

    Gregorius Satia Budhi

    2008-01-01

    Full Text Available Basketball World has grown rapidly as the time goes on. This is signed by many competition and game all over the world. With the result there are many basketball players with their different playing characteristics. Demand for a coach or scout to look for or search great players to make a solid team as a coach requirement. With this application, a coach or scout will be helped in analyzing in decision making. This application uses Self Organizing Maps algorithm (SOM for Cluster Analysis. The real NBA player data is used for competitive learning or training process and real player data from Indonesian or Petra Christian University Basketball Players is used for testing process. The NBA Player data is prepared through cleaning process and then is transformed into a form that can be processed by SOM Algorithm. After that, the data is clustered with the SOM algorithm. The result of that clusters is displayed into a form that is easy to view and analyze. This result can be saved into a text file. By using the output / result of this application, that are the clusters of NBA player, the user can see the statistics of each cluster. With these cluster statistics coach or scout can predict the statistic and the position of a testing player who is in the same cluster. This information can give a support for the coach or scout to make a decision. Abstract in Bahasa Indonesia : Dunia bola basket telah berkembang dengan pesat seiring dengan berjalannya waktu. Hal ini ditandai dengan munculnya berbagai macam dan jenis kompetisi dan pertandingan baik dunia maupun dalam negeri. Sehingga makin banyak dilahirkannya pemain berbakat dengan berbagai karakteristik permainan yang berbeda. Tuntutan bagi seorang pelatih/pemandu bakat, untuk dapat melihat secara jeli dalam memenuhi kebutuhan tim untuk membentuk tim yang solid. Dengan dibuatnya aplikasi ini, maka akan membantu proses analisis dan pengambilan keputusan bagi pelatih maupun pemandu bakat Aplikasi ini

  3. Sinéreses cromossômicas: projeto de complementaridade semiósica entre som e cor

    Directory of Open Access Journals (Sweden)

    Eufrásio Prates

    2008-11-01

    Full Text Available O trabalho de Basbaum transita, transdisciplinarmente, pelos campos da neurologia cognitiva, arte, fí­sica, matemática, tecnologia, misticismo e teosofia, trazidos à baila para compor a teia da sinestesia ontológica do cromo-som, complexo indissociável e simultâneo de som e cor, como busca de interconexões originárias entre som e cor a partir da esfera da primeiridade peirciana, da constituição mesma do fenômeno sinestésico. Palavras-chave Sinestesia, primeiridade. Abstract The work of Basbaum as a research on the originary interconnections between sound and color based upon the Peircian firstness sphere concern, the constitution of the synesthesic phenomenon itself , goes transdisciplinarly through the fields of cognitive neurology, arts, physics, mathematics, technology, mysticism and theosophy, all of them with regard to the weaving of the ontological; synesthesia of the chromosound, an indissociable and simultaneous complex ofsound and color. Keywords Synesthesic phenomenon, Peircian firstness.

  4. Innovativ formidling af førsteårsstuderende som et design-based research-forløb

    Directory of Open Access Journals (Sweden)

    Ole Eggers Bjælde

    2016-11-01

    Full Text Available 14 videoproduktioner, 4 tegneserier, 3 filmfortællinger, 2 sange, 2 nyhedsindslag, 2 børnebøger, 2 facebook-sider, 1 novelle og 1 toiletrulle var blandt resultaterne, da 112 førsteårsstuderende i det obligatoriske kursus Astrofysik på fysikuddannelsen på Aarhus Universitet blev deltagere i et learning design-forløb, som en del af deres eksamen i kurset. Målet med forløbet var dels at sætte fokus på faglig formidling som en væsentlig kompetence blandt universitetsstuderende, men samtidig også at bringe værdier som kreativitet og innovation i spil. Forløbet var tilrettelagt efter principperne for design-based research, og publikationen her sætter fokus på intention, implementering, realisering og perspektivering af det underliggende design med henblik på forbedring af designet til fremtidig brug samt på en vurdering af forløbets samlede impact.

  5. Kombineret laser Doppler flowmetri og spectrophotometri som metode til vurdering af mikrocirculation

    DEFF Research Database (Denmark)

    Berggren Olsen, Mette; Sørensen, Hanne Birke; Houlind, Kim Christian

    Kombineret laser Doppler flowmetri og spectrophotometri som metode til vurdering af mikrocirculation Berggren, MB, reservelæge, Karkirurgisk Afdeling, Kolding, mette.marie.berggren.olsen@slb.regionsyddanmark.dk; Houlind, K, lektor, afdelingslæge, Ph.d., Karkirurgisk afdeling, Kolding, kim...

  6. John Deweys pædagogik som filosofisk livskunst

    DEFF Research Database (Denmark)

    Dræby, Anders

    De senere år har der været forøget fokus på John Deweys slægtskab med antikkens filosofiske tradition. Oplægget stiller i den forbindelse skarpt på spørgsmålet om, hvorvidt og hvordan det giver mening at forstå Deweys pædagogiske filosofi i sammenhæng med Hellenismens og Romerrigets filosofiske...... livskunst. Er det med andre ord muligt at begribe Deweys pædagogik som en særlig form for filosofisk livskunst?...

  7. Aktionslæring som metode til udvikling af inkluderende praksis

    DEFF Research Database (Denmark)

    Olsson, Janne; Maltzahn, Lene Nyboe

    2014-01-01

    Kapitlet handler om, hvordan genkendelige hverdagspraksisser i daginstitutioner i nogle tilfælde ekskluderer børn, mens andre praksisser understøtter, at børn kan tage del i fællesskaber. Med afsæt i en konkret case argumenteres der for, at aktionslæring som metode kan gøre det muligt for pædagog...

  8. Technology Marketing using PCA , SOM, and STP Strategy Modeling

    OpenAIRE

    Sunghae Jun

    2011-01-01

    Technology marketing is a total processing about identifying and meeting the technological needs of human society. Most technology results exist in intellectual properties like patents. In our research, we consider patent document as a technology. So patent data are analyzed by Principal Component Analysis (PCA) and Self Organizing Map (SOM) for STP(Segmentation, Targeting, and Positioning) strategy modeling. STP is a popular approach for developing marketing strategies. We use STP strategy m...

  9. Optimizing classroom instruction through self-paced learning prototype

    Directory of Open Access Journals (Sweden)

    Romiro Gordo Bautista

    2015-09-01

    Full Text Available This study investigated the learning impact of self-paced learning prototype in optimizing classroom instruction towards students’ learning in Chemistry. Two sections of 64 Laboratory High School students in Chemistry were used as subjects of the study. The Quasi-Experimental and Correlation Research Design was used in the study: a pre-test was conducted, scored and analyzed which served as the basis in determining the initial learning schema of the respondents. A questionnaire was adopted to find the learning motivation of the students in science. Using Pearson-r correlation, it was found out that there is a highly significant relationship between their internal drive and their academic performance. Moreover, a post-test was conducted after self-paced learning prototype was used in the development of select topics in their curricular plot. It was found out that the students who experienced the self-paced learning prototype performed better in their academic performance as evidenced by the difference of their mean post-test results. ANCOVA results on the post-test mean scores of the respondents were utilized in establishing the causal-effect of the learning prototype to the academic performance of the students in Chemistry. A highly significant effect on their academic performance (R-square value of 70.7% and significant interaction of the models to the experimental grouping and mental abilities of the respondents are concluded in the study.

  10. Velfærdsteknologi og læringsteknologi med MOOC som eksempel

    DEFF Research Database (Denmark)

    Helms, Niels Henrik; Heilesen, Simon

    2015-01-01

    Kapitlet redegører for ‘Velfærdsteknologi’ i forhold til begrebet 'læringsteknologi’. Læringsteknologi bestemmes som velfærdsteknologi udfoldet inden for uddannelsessystemet. Ligesom velfærdsteknologi indføres læringsteknologi med multiple dagsordener, hvor hensigterne både er at tilskynde den læ...

  11. Teamcoaching som kvalificering af Cooperative Learning på læreruddannelsen

    DEFF Research Database (Denmark)

    Madsen, Henrik

    2008-01-01

    Projektet tager med et systemisk udgangspunkt et blik på coachingens muligheder som kvalificerende redskab for de studerendes tilegnelse af teoretiske og praktiske færdigheder i udviklingen af Cooperative Learning. Der er et teoretisk udgangspunkt i Luhmann og Vygotsky ligesom forskellige stadier i...... udviklingen fra gruppe til team skildres....

  12. Effect of variable soil texture, metal saturation of soil organic matter (SOM) and tree species composition on spatial distribution of SOM in forest soils in Poland.

    Science.gov (United States)

    Gruba, Piotr; Socha, Jarosław; Błońska, Ewa; Lasota, Jarosław

    2015-07-15

    In this study we investigated the effect of fine (ϕclay (FF) content in soils, site moisture, metal (Al and Fe) of soil organic matter (SOM) and forest species composition on the spatial distribution of carbon (C) pools in forest soils at the landscape scale. We established 275 plots in regular 200×200m grid in a forested area of 14.4km(2). Fieldwork included soil sampling of the organic horizon, mineral topsoil and subsoil down to 40cm deep. We analysed the vertical and horizontal distribution of soil organic carbon (SOC) stocks, as well as the quantity of physically separated fractions including the free light (fLF), occluded light (oLF) and mineral associated fractions (MAF) in the mineral topsoil (A, AE) horizons. Distribution of C in soils was predominantly affected by the variation in the FF content. In soils richer in the FF more SOC was accumulated in mineral horizons and less in the organic horizons. Accumulation of SOC in mineral soil was also positively affected by the degree of saturation of SOM with Al and Fe. The increasing share of beech influenced the distribution of C stock in soil profiles by reducing the depth of O horizon and increasing C stored in mineral soil. The content of FF was positively correlated with the content of C in MAF and fLF fractions. The content of oLF and MAF fractions was also positively influenced by a higher degree of metal saturation, particularly Al. Our results confirmed that Al plays an important role in the stabilization of SOM inside aggregates (CoLF) and as in CMAF fractions. We also found a significant, positive effect of beech on the CfLF and fir on the CoLF content. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Prototype steam generator test at SCTI/ETEC. Acoustic program test plan

    International Nuclear Information System (INIS)

    Greene, D.A.; Thiele, A.; Claytor, T.N.

    1981-10-01

    This document is an integrated test plan covering programs at General Electric (ARSD), Rockwell International (RI) and Argonne National Laboratory (CT). It provides an overview of the acoustic leak detection test program which will be completed in conjunction with the prototype LMFBR steam generator at the Energy Technology Engineering Laboratory. The steam generator is installed in the Sodium Components Test Installation (SCTI). Two acoustic detection systems will be used during the test program, a low frequency system developed by GE-ARSD (GAAD system) and a high frequency system developed by RI-AI (HALD system). These systems will be used to acquire data on background noise during the thermal-hydraulic test program. Injection devices were installed during fabrication of the prototype steam generator to provide localized noise sources in the active region of the tube bundle. These injectors will be operated during the steam generator test program, and it will be shown that they are detected by the acoustic systems

  14. Enhancing experience prototyping by the help of mixed-fidelity prototypes

    OpenAIRE

    Yasar, Ansar-Ul-Haque

    2007-01-01

    In this research review I undertook the problem related to the usage of a new concept known as the Mixed- Fidelity Prototype which is a mixture of its predecessors Low- and High- Fidelity Prototypes in Experience Prototyping. Experience Prototyping is a good way to explore, communicate and interact with the designs we develop like experiencing cycling on the ice, although the mood, snow conditions, bicycle type and many other factors really matter and tend to change with time. Experience Prot...

  15. Prototype dining hall energy efficiency study

    Energy Technology Data Exchange (ETDEWEB)

    Mazzucchi, R.P.; Bailey, S.A.; Zimmerman, P.W.

    1988-06-01

    The energy consumption of food service facilities is among the highest of any commercial building type, owing to the special requirements for food preparation, sanitation, and ventilation. Consequently, the US Air Force Engineering and Services Center (AFESC) contracted with Pacific Northwest Laboratory (PNL) to collect and analyze end-use energy consumption data for a prototypical dining hall and make specific recommendations on cost-effective energy conservation options. This information will be used to establish or update criteria for dining hall designs and retrofits as appropriate. 6 refs., 21 figs., 23 tabs.

  16. Thermal phase shift - Optimisation and prototype; Dephaseur thermique. Optimisation et prototype integre

    Energy Technology Data Exchange (ETDEWEB)

    Hollmuller, P.; Lachal, B.

    2006-07-01

    This illustrated report for the Swiss Federal Office of Energy (SFOE) summarises the work done at the University of Geneva's Centre for Research into Energy Problems on a new concept for the storage of thermal energy in ventilation systems in order to reduce the effect of daytime heating of the fresh air taken into the system. The study involved the development of prototypes using water as a storage medium and the determination of the direction which the development of an industrial product should take. Work done in the laboratory is described, as is the configuration of the storage elements examined. These consisted of PVC tubes filled with water on the one hand, and concrete slabs on the other.

  17. First Study Of HEPA Filter Prototype Performance To Control The Airborne Pollution

    International Nuclear Information System (INIS)

    Soetomo; Suwarno

    2000-01-01

    This paper will report the efficiency test result of the filtration tool prototype of High Efficiency Particulate Air (HEPA filter) for low temperature, to control the airborne pollution of aerosol particle of solid and liquid. The prototype design of HEPA filter was based on the characteristic data of filter material (fibrous diameter, density, filter thickness), flow rate of air and first pressure drop. From the result of laboratory scale test, using DOP/PSL aerosol with 0,3 mum diameter and the flow rate of 3,78 m exp.3/min, was obtained filtration efficiency revolve between 89,90 and 99,94 % for the filter prototype of A, B, C, and D. the efficiency estimation of theory with filtration programme and the experiment was different amount 1 %. The value of the prototype efficiency of D filter was not far different with AAF-USA filter and its price is cheaper 30 % than the price of AAF-USA filter

  18. High dimension feature extraction based visualized SOM fault diagnosis method and its application in p-xylene oxidation process☆

    Institute of Scientific and Technical Information of China (English)

    Ying Tian; Wenli Du; Feng Qian

    2015-01-01

    Purified terephthalic acid (PTA) is an important chemical raw material. P-xylene (PX) is transformed to terephthalic acid (TA) through oxidation process and TA is refined to produce PTA. The PX oxidation reaction is a complex process involving three-phase reaction of gas, liquid and solid. To monitor the process and to im-prove the product quality, as wel as to visualize the fault type clearly, a fault diagnosis method based on self-organizing map (SOM) and high dimensional feature extraction method, local tangent space alignment (LTSA), is proposed. In this method, LTSA can reduce the dimension and keep the topology information simultaneously, and SOM distinguishes various states on the output map. Monitoring results of PX oxidation reaction process in-dicate that the LTSA–SOM can wel detect and visualize the fault type.

  19. Claus Beck-Nielsen som spøgelse

    DEFF Research Database (Denmark)

    Larsen, Peter Stein

    2012-01-01

    Med Brian Grahams artikel “Sympathy for the Spectres: The Double Nature of Blake’s Spectral Figures in Jerusalem” forbliver vi inden for den litterære tradition, men bevæger os en smule længere frem i tiden. Graham retter blikket mod William Blakes forfatterskab og påpeger, at Blakes univers er...... feministisk synsvinkel – er spøgelserne dobbelte: de spiller en rolle i kristendommens historie, samtidig med at de spiller en kontrasterende sympatisk rolle i den universelle strid mellem Blakes ”male and female powers”, denne evige strid mellem disse to poler ses af Blake som grundlaget for al skabelse og...

  20. Brand management og den refleksive forbruger - med semiotik som hjælpedisciplin

    DEFF Research Database (Denmark)

    Hermansen, Judy

    2009-01-01

      Kritisk eftertanke er et væsentligt træk ved den refleksive forbruger - ofte parret med en vis negativitet overfor et brand, en reklame eller forbrugerisme i al almindelighed. Den refleksive forbrugertype kommer til udtryk hos for eksempel en anti-branding guru som Naomi Klein og hendes...... bestseller bog "No Logo" eller i græsrodsbevægelsen Adbusters ( https://www.adbusters.org/ ), der efterhånden i mange år har udsendt et månedsmagasin med kritik af forbrugersamfundet og al dets reklame og branding. Disse anti-forbrugs og anti-branding bevægelser udspringer af, og er identifikationspunkter...... - den refleksive forbruger skal have noget, der kan "brande" ham som anderledes end alle mainstreamforbrugerne. Den refleksive forbruger er med andre ord en Feinschmecker og i lighed med - eller måske rettere i endnu højere grad end - alle andre forbrugere signalerer den refleksive forbruger sin...

  1. Embriogênese somática em cana-de-açúcar e aspectos morfoanatômicos

    OpenAIRE

    Melo, Emanuelle Ferreira

    2011-01-01

    O presente estudo teve como objetivos avaliar os efeitos de diferentes tipos de explantes e reguladores de crescimento nas diferentes fases da embriogênese somática de cana-de-açúcar, cultivar RB867515 e caracterizar anatomicamente as fases deste processo nesta cultivar. Além disso, foi avaliada a regeneração in vitro, via embriogênese somática, nas cultivares RB855536 e RB92579. Na primeira etapa do trabalho foram avaliados o uso de dois tipos de explantes iniciais: folhas imaturas e ápices ...

  2. Nordkapp som bærekraftig destinasjon - Et case-studie av aktørers drivere og barrierer

    OpenAIRE

    Berg, Marianne; Røkholt, Solveig

    2016-01-01

    Tittelen på oppgaven er “Nordkapp som bærekraftig destinasjon: Et case-studie av aktørers drivere og barrierer”. Vi har utviklet problemstillingen: “Hvilke drivere og barrierer ligger til grunn for utviklingen av et bærekraftig reiseliv blant aktørene på destinasjon Nordkapp?” Temaet vi ønsker å ta for oss er derfor bærekraftig destinasjonsutvikling på naturdestinasjoner. Bærekraft er en tematikk som må tas hensyn til for reiselivets overlevelsesevne. For å undersøke dette har vi brukt et kva...

  3. Skrivehandlinger som redskab til klar faglig formidling på PharmaSchool

    DEFF Research Database (Denmark)

    Laursen, Katja Årosin

    2016-01-01

    Denne artikel beskriver et pilotprojekt fra 2013, som havde til formål at øge opmærksomheden på klar skriftlig faglig formidling hos undervisere og studerende i kurset Dynamisk Biokemi på PharmaSchool ved Københavns Universitet (KU). På baggrund af en grundig behovsafdækning udviklede en akademisk...

  4. Spatial Heterogeneity of SOM Concentrations Associated with White-rot Versus Brown-rot Wood Decay.

    Science.gov (United States)

    Bai, Zhen; Ma, Qiang; Dai, Yucheng; Yuan, Haisheng; Ye, Ji; Yu, Wantai

    2017-10-23

    White- and brown-rot fungal decay via distinct pathways imparts characteristic molecular imprints on decomposing wood. However, the effect that a specific wood-rotting type of fungus has on proximal soil organic matter (SOM) accumulation remains unexplored. We investigated the potential influence of white- and brown-rot fungi-decayed Abies nephrolepis logs on forest SOM stocks (i.e., soil total carbon (C) and nitrogen (N)) and the concentrations of amino sugars (microbial necromass) at different depths and horizontal distances from decaying woody debris. The brown-rot fungal wood decay resulted in higher concentrations of soil C and N and a greater increase in microbial necromass (i.e., 1.3- to 1.7-fold greater) than the white-rot fungal wood decay. The white-rot sets were accompanied by significant differences in the proportions of the bacterial residue index (muramic acid%) with soil depth; however, the brown-rot-associated soils showed complementary shifts, primarily in fungal necromass, across horizontal distances. Soil C and N concentrations were significantly correlated with fungal rather than bacterial necromass in the brown-rot systems. Our findings confirmed that the brown-rot fungi-dominated degradation of lignocellulosic residues resulted in a greater SOM buildup than the white-rot fungi-dominated degradation.

  5. Validation of Reverse-Engineered and Additive-Manufactured Microsurgical Instrument Prototype.

    Science.gov (United States)

    Singh, Ramandeep; Suri, Ashish; Anand, Sneh; Baby, Britty

    2016-12-01

    With advancements in imaging techniques, neurosurgical procedures are becoming highly precise and minimally invasive, thus demanding development of new ergonomically aesthetic instruments. Conventionally, neurosurgical instruments are manufactured using subtractive manufacturing methods. Such a process is complex, time-consuming, and impractical for prototype development and validation of new designs. Therefore, an alternative design process has been used utilizing blue light scanning, computer-aided designing, and additive manufacturing direct metal laser sintering (DMLS) for microsurgical instrument prototype development. Deviations of DMLS-fabricated instrument were studied by superimposing scan data of fabricated instrument with the computer-aided designing model. Content and concurrent validity of the fabricated prototypes was done by a group of 15 neurosurgeons by performing sciatic nerve anastomosis in small laboratory animals. Comparative scoring was obtained for the control and study instrument. T test was applied to the individual parameters and P values for force (P direct application of these additive-manufactured instruments in the operating room requires further validation. © The Author(s) 2016.

  6. Victoria's Secret : Märket som skapade en drömvärld och blev till en framgångssaga

    OpenAIRE

    Jonsson, Christine; Stenlo, Andrea

    2014-01-01

    Victoria’s Secret grundades 1977 i Kalifornien, USA. Idag har märket, som främst säljer underkläder, nått en enorm popularitet. I USA finns det, hösten 2014, över 1 000 butiker. Företagets främsta sätt att marknadsföra sig på är genom dess modeshow – The Victoria’s Secret Fashion Show - som sänds en gång per år på CBS. Den påkostade showen blandar modevisningen, som är uppdelad i ett antal olika teman, med uppträdanden av de för tillfället mest populära artisterna.      Syftet med uppsatsen ä...

  7. Emma Bentz: I stadens skugga. Den medeltida landsbygden som arkeologiskt forskningsfält

    DEFF Research Database (Denmark)

    Kristiansen, Mette Svart

    2009-01-01

    Anmeldelse af doktordisputats, Lunds Universitet. Afhandlingen omhandler etableringen af den middelalderlige landbebyggelse som arkæologisk forskningsfelt fra 1930érne til i dag samt etableringen og vedligeholdelsen af et forskningsfelt indenfor den humanistiske videnskab....

  8. Investigating the role of implicit prototypes in the prototype willingness model.

    Science.gov (United States)

    Howell, Jennifer L; Ratliff, Kate A

    2017-06-01

    One useful theory to predict health behavior is the prototype-willingness model (PWM), which posits that people are more willing to engage in behavior to the extent that they have a positive view of the prototypical person who performs that behavior. The goal of the present research is to test whether adding an implicit measure of prototype favorability might improve explanatory power in the PWM. Two studies examined whether implicit prototype favorability uniquely predicted White women's intentions to engage in healthy sun behavior over the next 3-6 months, and their willingness to engage in risky sun behavior, should the opportunity arise. The results suggested that implicit prototype favorability, particularly implicit prototypes of those who engage in risky UV-related behaviors, uniquely predicted intentions to engage in healthy sun behavior and willingness to engage in risky sun behavior in the PWM.

  9. Software Prototyping

    Science.gov (United States)

    Del Fiol, Guilherme; Hanseler, Haley; Crouch, Barbara Insley; Cummins, Mollie R.

    2016-01-01

    Summary Background Health information exchange (HIE) between Poison Control Centers (PCCs) and Emergency Departments (EDs) could improve care of poisoned patients. However, PCC information systems are not designed to facilitate HIE with EDs; therefore, we are developing specialized software to support HIE within the normal workflow of the PCC using user-centered design and rapid prototyping. Objective To describe the design of an HIE dashboard and the refinement of user requirements through rapid prototyping. Methods Using previously elicited user requirements, we designed low-fidelity sketches of designs on paper with iterative refinement. Next, we designed an interactive high-fidelity prototype and conducted scenario-based usability tests with end users. Users were asked to think aloud while accomplishing tasks related to a case vignette. After testing, the users provided feedback and evaluated the prototype using the System Usability Scale (SUS). Results Survey results from three users provided useful feedback that was then incorporated into the design. After achieving a stable design, we used the prototype itself as the specification for development of the actual software. Benefits of prototyping included having 1) subject-matter experts heavily involved with the design; 2) flexibility to make rapid changes, 3) the ability to minimize software development efforts early in the design stage; 4) rapid finalization of requirements; 5) early visualization of designs; 6) and a powerful vehicle for communication of the design to the programmers. Challenges included 1) time and effort to develop the prototypes and case scenarios; 2) no simulation of system performance; 3) not having all proposed functionality available in the final product; and 4) missing needed data elements in the PCC information system. PMID:27081404

  10. Laboratory simulation of maintenance activity

    International Nuclear Information System (INIS)

    Kantowitz, B.H.

    1988-01-01

    Laboratory research in highly controlled settings can augment, but not replace, studies in plant or training center locations. A laboratory simulation involves abstraction of the human information processing and social interactions required in prototypical maintenance tasks. A variety of independent variables can be studied quickly, efficiently, and at relatively low cost. Sources of human error can be identified in terms of models of human perception, cognition, action, attention, and social/organizational processes. This paper discusses research in progress at the Battelle Human Performance Laboratory. Both theoretical aspects and practical implications are considered. Directions for future human factors research are indicated

  11. Making the future palpable: Notes from a major incident Future Laboratory

    DEFF Research Database (Denmark)

    Büscher, Monika; Kristensen, Margit; Mogensen, Preben Holst

    2008-01-01

    In this paper we describe experiences from a Future Laboratory. Future laboratories allow users to experiment with prototypes of future technologies in as realistic as possible conditions. We have devised this method because, to realize the potential of advanced ubiquitous computing technologies...... it is essential to anticipate and design for future practices, but for prospective users it is often difficult to imagine and articulate future practices and provide design specifications. However, they readily invent new ways of working in engagement with new technologies and, by facilitating realistic use...... of prototype technologies in Future Laboratories, designers and users can define and study both opportunities and constraints for design. We present 11 scenes from a Major Incidents Future Laboratory held in September 2005. Many raise tough questions rather than provide quick answers. In addition, many also...

  12. Test results for three prototype models of a linear induction launcher

    International Nuclear Information System (INIS)

    Zabar, Z.; Lu, X.N.; He, J.L.; Birenbaum, L.; Levi, E.; Kuznetsov, S.B.; Nahemow, M.D.

    1991-01-01

    This paper reports on the work on the linear induction launcher (LIL) started with an analytical study tht was followed by computer simulations and then was tested by laboratory models. Two mathematical representations have been developed to describe the launcher. The first, based on the field approach with sinusoidal excitation, has been validated by static tests on a small scale prototype fed at constant current and variable frequency. The second, a transient representation using computer simulation allows consideration of energization by means of a capacitor bank and a power conditioner. Tests performed on three small-scale prototypes up to 100 m/s muzzle velocities show good agreement with predicted performance

  13. Plating laboratory

    International Nuclear Information System (INIS)

    Seamster, A.G.; Weitkamp, W.G.

    1984-01-01

    The lead plating of the prototype resonator has been conducted entirely in the plating laboratory at SUNY Stony Brook. Because of the considerable cost and inconvenience in transporting personnel and materials to and from Stony Brook, it is clearly impractical to plate all the resonators there. Furthermore, the high-beta resonator cannot be accommodated at Stony Brook without modifying the set up there. Consequently the authors are constructing a plating lab in-house

  14. Photoacoustic mammography laboratory prototype: imaging of breast tissue phantoms

    NARCIS (Netherlands)

    Manohar, Srirang; Kharine, Alexei; van Hespen, Johan C. G.; Steenbergen, Wiendelt; van Leeuwen, Ton G.

    2004-01-01

    We present a laboratory version of a photoacoustic mammoscope, based on a parallel plate geometry. The instrument is built around a flat high-density ultrasound detector matrix. The light source is a Q-switched Nd:YAG laser with a pulse duration of 5 ns. To test the instrument, a novel photoacoustic

  15. Chemical characterization of soil organic matter in a Chesapeake Bay salt marsh: analyzing microbial and vegetation inputs to SOM

    Science.gov (United States)

    Bye, E.; Schreiner, K. M.; Abdulla, H. A.; Minor, E. C.; Guntenspergen, G. R.

    2017-12-01

    Coastal wetlands play a critical role in the global carbon cycle. These ecosystems sequester and store carbon, known as "blue carbon," at a rate two or three orders of magnitude larger than other terrestrial ecosystems, such as temperate, tropical, and boreal forests. Anthropogenic changes to the climate are threatening blue carbon stores in coastal wetland ecosystems. To understand and predict how these important carbon stores will be affected by anthropogenic climate changes, it is necessary to understand the formation and preservation of soil organic matter (SOM) in these ecosystems. This study will present organic geochemical data from two sediment cores collected from the Smithsonian Environmental Research Center site on a salt marsh in Maryland along the Chesapeake Bay. One core is from a location that recently transitioned from a C4 to C3 plant regime, currently dominated by the sedge Shoenplectis americanus. The second core is from a C4 plant (Spartina patens) dominated location in the marsh. The organic geochemistry of these 100 cm deep sediment cores was studied through multiple bulk analyses including stable isotopes, elemental ratios, Fourier-transform infrared spectroscopy (FTIR), solid-state magic-angle-spinning Nuclear Magnetic Resonance (NMR), and compound specific lignin-phenol analysis. By using comprehensive chemical characterization techniques, this study aims to discern between vegetation- and microbially-derived inputs to SOM in blue carbon ecosystems. The results show a general increase in the aromatic content with a concomitant decrease of carbohydrates with depth in both cores. However, substantial differences between the two cores, indicates differing inputs and/or stabilization mechanisms within SOM formed from different vegetation regimes. Further compound specific work will help to elucidate the specific source of compounds within each compound class, in surface and deep SOM, and additionally can help provide evidence for different

  16. Digitalisering af færdighedstræning og laboratorieøvelser

    DEFF Research Database (Denmark)

    Nørgaard, Cita; Dahl, Mads R; Fridorff-Jens, Peter K.

    2014-01-01

    Dette temanummer af “Læring og Medier” sætter fokus på digitalisering af færdighedstræning og laboratorieøvelser på universiteter og UC’er. Der er mange krav og hensyn, som skal tilgodeses, når vi digitaliserer, og det har altid indflydelse på arbejdsgange, kommunikation og læringen. Helt....... Af eksempler kan nævnes simulerede rollespil, virtuel case undervisning, sproglig færdighedstræning, simulatorer og digitale laboratorier. I dette temanummer lægges der op til, at dele erfaringer og best practice man har gjort sig med digitalisering af færdighedstræning og anden inddragelse af medier...

  17. Solution Prototype

    DEFF Research Database (Denmark)

    Efeoglu, Arkin; Møller, Charles; Serie, Michel

    2013-01-01

    This paper outlines an artifact building and evaluation proposal. Design Science Research (DSR) studies usually consider encapsulated artifact that have relationships with other artifacts. The solution prototype as a composed artifact demands for a more comprehensive consideration in its systematic...... environment. The solution prototype that is composed from blending product and service prototype has particular impacts on the dualism of DSR’s “Build” and “Evaluate”. Since the mix between product and service prototyping can be varied, there is a demand for a more agile and iterative framework. Van de Ven......’s research framework seems to fit this purpose. Van de Ven allows for an iterative research approach to problem solving with flexible starting point. The research activity is the result between the iteration of two dimensions. This framework focuses on the natural evaluation, particularly on ex...

  18. Hvad kan du tilbyde mig som muslim, præst?

    DEFF Research Database (Denmark)

    Skovsgaard, Steen

    2005-01-01

    . islam og kristendom var jeg i 1995 inviteret til et møde med en stor gruppe muslimer i Gellerup. Det var et debatmøde om islam og kristendom, hvor skoleleder og imam Abdul Wahid Pedersen og jeg skulle komme med oplæg og debattere. Og så kunne der efterfølgende stilles spørgsmål fra salen. Det var hér...... andre mennesker, eller om Gud elsker dig og vil ha’ noget med dig at gøre, den dag må du love mig at komme tilbage. For så har jeg noget at tilbyde dig. Indtil da må du nøjes med islam!” Et sådant svar ville ganske vist ha’ været længere, men der ville også ha’ været mere for den unge muslim at tænke på...... og overkommelige krav, som stilles dig i islam. Selv her har du svigtet og er skyldig! Skyldig til dom og til straf!”. Og hvis så muslimen skulle finde på at sige, at han da bestemt har opfyldt Guds vilje iflg. islam, så kan vi jo passende fortælle ham, at de krav som stilles i islam kun er en bleg...

  19. Børnetegninger som orienteringsspor og forskningsdata

    DEFF Research Database (Denmark)

    Nielsen, Anne Maj

    2012-01-01

    orientation and to discuss how children’s art and drawings can be approached as research data. The construct of children’s art and drawings are comprised of a double approach: Children’s drawings are conceptualized as articulations of not yet thematized emotions, experiences and meaningfulness...... hvordan de er blevet anvendt i forskning samt diskuterer forskellige perspektiver på tegninger som forskningsmateriale og anvendelse af tegninger i forskning. The article aims to illustrate how children’s art and drawings can produce knowledge of children’s personal, experience-based and gendered...... and the articulations include use and learning of visual socio-cultural codes and symbols. The construct comprise an existential-phenomenological and a socio-cultural learning oriented approach. A variation of examples is presented to illustrate the use of children’s drawings in research and to discuss the introduced...

  20. Knowledge-based approach for functional MRI analysis by SOM neural network using prior labels from Talairach stereotaxic space

    Science.gov (United States)

    Erberich, Stephan G.; Willmes, Klaus; Thron, Armin; Oberschelp, Walter; Huang, H. K.

    2002-04-01

    Among the methods proposed for the analysis of functional MR we have previously introduced a model-independent analysis based on the self-organizing map (SOM) neural network technique. The SOM neural network can be trained to identify the temporal patterns in voxel time-series of individual functional MRI (fMRI) experiments. The separated classes consist of activation, deactivation and baseline patterns corresponding to the task-paradigm. While the classification capability of the SOM is not only based on the distinctness of the patterns themselves but also on their frequency of occurrence in the training set, a weighting or selection of voxels of interest should be considered prior to the training of the neural network to improve pattern learning. Weighting of interesting voxels by means of autocorrelation or F-test significance levels has been used successfully, but still a large number of baseline voxels is included in the training. The purpose of this approach is to avoid the inclusion of these voxels by using three different levels of segmentation and mapping from Talairach space: (1) voxel partitions at the lobe level, (2) voxel partitions at the gyrus level and (3) voxel partitions at the cell level (Brodmann areas). The results of the SOM classification based on these mapping levels in comparison to training with all brain voxels are presented in this paper.

  1. Toward a new task assignment and path evolution (TAPE) for missile defense system (MDS) using intelligent adaptive SOM with recurrent neural networks (RNNs).

    Science.gov (United States)

    Wang, Chi-Hsu; Chen, Chun-Yao; Hung, Kun-Neng

    2015-06-01

    In this paper, a new adaptive self-organizing map (SOM) with recurrent neural network (RNN) controller is proposed for task assignment and path evolution of missile defense system (MDS). We address the problem of N agents (defending missiles) and D targets (incoming missiles) in MDS. A new RNN controller is designed to force an agent (or defending missile) toward a target (or incoming missile), and a monitoring controller is also designed to reduce the error between RNN controller and ideal controller. A new SOM with RNN controller is then designed to dispatch agents to their corresponding targets by minimizing total damaging cost. This is actually an important application of the multiagent system. The SOM with RNN controller is the main controller. After task assignment, the weighting factors of our new SOM with RNN controller are activated to dispatch the agents toward their corresponding targets. Using the Lyapunov constraints, the weighting factors for the proposed SOM with RNN controller are updated to guarantee the stability of the path evolution (or planning) system. Excellent simulations are obtained using this new approach for MDS, which show that our RNN has the lowest average miss distance among the several techniques.

  2. Mechanical properties used for the qualification of transport casks: Prototype development and extension to serial production

    International Nuclear Information System (INIS)

    Salzbrenner, R.; Crenshaw, T.B.; Sorenson, K.B.

    1991-01-01

    A thorough understanding of the mechanical behavior of material in a specific cask is required to properly analyze the structural response of the cask. An appropriate way to establish this understanding is through laboratory testing of cask material. The laboratory testing that was done to support the MOSAIK Drop Test Program is summarized as an example of how mechanical properties can be mapped for a prototype cask. The broad range behavior to be understood. This is necessary for the proper application of fracture mechanics, and focuses on fracture toughness as the inherent materials property which quantifies the fracture resistance of a material. The understanding established by a mechanics to a particular prototype, behavior of a prototype must be correctly associated with parameters which can be measured on production casks. Since the production casks cannot be destructively tested, measurements are commonly made on sub-size specimens. This may prevent direct measurement of valid design properties. An additional database may then be required to establish the correlation between sub-size specimen measurements and valid design properties. This is illustrated by outlining the additional testing which would be necessary to allow the successful verification of the MOSAIK Drop Test Program to be extended from the prototype to serially produced casks

  3. Characterisation of pixel sensor prototypes for the ALICE ITS upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Reidt, Felix [CERN (Switzerland); Physikalisches Institut, Universitaet Heidelberg (Germany); Collaboration: ALICE-Collaboration

    2014-07-01

    ALICE is preparing a major upgrade of its experimental apparatus to be installed in the second long LHC shutdown (LS2) in the years 2018-2019. A key element of the upgrade is the replacement of the Inner Tracking System (ITS) deploying Monolithic Active Pixel Sensors (MAPS). The upgraded ITS will have a reduced material budget while increasing the pixel density and readout rate capabilities. The novel design leads to higher pointing and momentum resolution as well as a p{sub T} acceptance extended to lower values. The corresponding sensor prototypes were qualified in laboratory measurements and beam tests with respect to their radiation tolerance and detection efficiency. This talk summarises recent results on the characterisation of prototypes belonging to the ALPIDE family.

  4. Removal of CO2 from the terrestrial atmosphere to curtail global warming: From methodology to laboratory prototype

    Science.gov (United States)

    Orton, Andrea E.

    This research has focused on the initial phase of required investigations in pursuit of a global scale methodology for reduction of CO 2 in terrestrial air for the purpose of curtailment of global warming. This methodology was initially presented by Agee, Orton, and Rogers (2013), and has provided the basis for pursuing this thesis research. The first objective of the research project was to design and build a laboratory prototype system, capable of depleting CO2 from terrestrial air at 1 bar of pressure through LN2 refrigeration. Design considerations included a 26.5L cylindrical Pyrex glass sequestration chamber, a container to hold a reservoir of LN2 and an interface between the two to allow for cooling and instrumentation ports for measurements inside the sequestration chamber. Further, consideration was given to the need for appropriate insulating material to enclose the assembled apparatus to help achieve efficient cooling and the threshold depositional temperature of 135 K. The Amy Facility in the Department of Chemistry provided critical expertise to machine the apparatus to specifications, especially the stainless steel interface plate. Research into available insulating materials resulted in the adaption of TRYMER RTM 2500 Polyisocyanurate, effective down to 90 K. The above described DAC prototype designed for CO2 sequestration accomplished two of the initial research objectives investigated: 1) conduct refrigeration experiments to achieve CO2 terrestrial deposition temperature of 135 K (uniformly) and 2) deplete CO2 from the chamber air at 1 bar of pressure, documented by appropriate measurements. It took approximately 5.5 hours for the chamber to be completely uniform in temperature of 135 K (and below) through the use of LN2 poured into the container sitting on an aluminum interface on top of the sequestration Pyrex chamber. As expected, Rayleigh-Taylor instability (more dense fluid over less dense fluid) was observed through the duration of the

  5. Simulation and Rapid Prototyping of Adaptive Control Systems using the Adaptive Blockset for Simulink

    DEFF Research Database (Denmark)

    Ravn, Ole

    1998-01-01

    The paper describes the design considerations and implementational aspects of the Adaptive Blockset for Simulink which has been developed in a prototype implementation. The concept behind the Adaptive Blockset for Simulink is to bridge the gap between simulation and prototype controller implement...... design, controller and state variable filter.The use of the Adaptive Blockset is demonstrated using a simple laboratory setup. Both the use of the blockset for simulation and for rapid prototyping of a real-time controller are shown.......The paper describes the design considerations and implementational aspects of the Adaptive Blockset for Simulink which has been developed in a prototype implementation. The concept behind the Adaptive Blockset for Simulink is to bridge the gap between simulation and prototype controller...... implementation. This is done using the code generation capabilities of Real Time Workshop in combination with C s-function blocks for adaptive control in Simulink. In the paper the design of each group of blocks normally found in adaptive controllers is outlined. The block types are, identification, controller...

  6. Cooperative Prototyping Experiments

    DEFF Research Database (Denmark)

    Bødker, Susanne; Grønbæk, Kaj

    1989-01-01

    This paper describes experiments with a design technique that we denote cooperative prototyping. The experiments consider design of a patient case record system for municipal dental clinics in which we used HyperCard, an off the shelf programming environment for the Macintosh. In the ecperiments we...... tried to achieve a fluent work-like evaluation of prototypes where users envisioned future work with a computer tool, at the same time as we made on-line modifications of prototypes in cooperation with the users when breakdown occur in their work-like evaluation. The experiments showed...... that it was possible to make a number of direct manipulation changes of prototypes in cooperation with the users, in interplay with their fluent work-like evaluation of these. However, breakdown occurred in the prototyping process when we reached the limits of the direct manipulation support for modification. From...

  7. Unikabeton Prototype

    DEFF Research Database (Denmark)

    Søndergaard, Asbjørn; Dombernowsky, Per

    2011-01-01

    The Unikabeton prototype structure was developed as the finalization of the cross-disciplinary research project Unikabeton, exploring the architectural potential in linking the computational process of topology optimisation with robot fabrication of concrete casting moulds. The project was elabor......The Unikabeton prototype structure was developed as the finalization of the cross-disciplinary research project Unikabeton, exploring the architectural potential in linking the computational process of topology optimisation with robot fabrication of concrete casting moulds. The project...... of Architecture was to develop a series of optimisation experiments, concluding in the design and optimisation of a full scale prototype concrete structure....

  8. Design of master control unit for laboratory prototype of traction converter for locomotives

    OpenAIRE

    Žák, Jan; Peroutka, Zdeněk; Ovaska, Seppo J.

    2008-01-01

    This paper deals with the prototype of a main traction converter with medium-frequency transformer for AC trolley wire-fed locomotives. The attention is paid to the new master control and diagnostic unit. The designed master control unit has been implemented in the LabVIEW environment. Our master control unit ensures an effective human interface between a user and the control hardware. In this case, the master unit makes possible both extensive control and diagnostic operations of the laborat...

  9. Indução e desenvolvimento de calos e embriões somáticos em mamoeiro

    OpenAIRE

    Almeida,Eliane Pires de; Oliveira,Roberto Pedroso de; Dantas,Jorge Luis Loyola

    2001-01-01

    Este trabalho teve por objetivo estabelecer um protocolo para a indução e desenvolvimento de calos e embriões somáticos em mamoeiro (Carica papaya L. cv. Tainung n.1). Foram utilizados quatro tipos de explantes (hipocótilo com folhas cotiledonares, hipocótilo, folhas cotiledonares e epicótilo) e duas condições de cultivo (escuro e 16 horas de luz). A indução e o desenvolvimento de calos foram avaliados nos meios de cultura ½MS2, ½MS10 e HMH e a indução e o desenvolvimento de embriões somático...

  10. Testing of Prototype Magnetic Suspension Cryogenic Transfer Line

    Science.gov (United States)

    Fesmire, J. E.; Augustynowicz, S. D.; Nagy, Z. F.; Sojourner, S. J.; Shu, Q. S.; Cheng, G.; Susta, J. T.

    2006-04-01

    A 6-meter prototype cryogenic transfer line with magnetic suspension was tested for its mechanical and thermal performance at the Cryogenics Test Laboratory of NASA Kennedy Space Center (KSC). A test facility with two cryogenic end-boxes was designed and commissioned for the testing. Suspension mechanisms were verified through a series of tests with liquid nitrogen. The thermal performance of the prototype was determined using the new test apparatus. The tested prototype has incorporated temperature and vacuum pressure data acquisition ports, customized interfaces to cryogenic end-boxes, and instrumentation. All tests were conducted under simulated onsite transfer line working conditions. A static (boiloff rate measurement) testing method was employed to demonstrate the gross heat leak in the tested article. The real-time temperature distribution, vacuum level, levitation distance, and mass flow rate were measured. The main purpose of this paper is to summarize the testing facility design and preparation, test procedure, and primary test results. Special arrangements (such as turning on/off mechanical support units, observing levitation gap, and setting up the flowmeter) in testing of such a magnetically levitated transfer line are also discussed. Preliminary results show that the heat leak reduction of approximately one-third to one-half is achievable through such transfer lines with a magnetic suspension system.

  11. Tool application CAD / CAM for design and construction of a prototype of plastic injection mold

    Directory of Open Access Journals (Sweden)

    Albert Miyer Suárez Castrillón

    2015-11-01

    Full Text Available The study, development and production of injection molds comes with the implementation of CAD and CAM tools available on the market; using these tools, a prototype injection mold for thermoplastic materials was designed and built, based on a mold is injection in the laboratory of the University of Pamplona, in which a couple of modifications were made in order to experiment with its design. The prototype was manufactured through a 3D scan of the original mold to provide the CAD / CAM files with the simulated 3D printing technique for performing an experimental study with the prototype for adjusting temperature and pressure sensors and for coatings metallic materials for use in the injection molding process.

  12. Void -spelprototyp för Xbox360 / Void -game prototype for Xbox360

    OpenAIRE

    Lindberg, Joakim; Gullbrandson, Fredrik; Nilsson, Bo Martin

    2008-01-01

    Detta examensarbete består utav av två delar, en produktionsdel och denna slutreflektion. Produktionsdelen varade i 15 veckor och gick ut på att utveckla en spelprototyp. Spelprototypen är ämnad för spelkonsolen Xbox360, som är den nya generationens tv-spel. För att kunna utveckla till denna konsol måste man använda sig av XNA, som är ett utvecklingsverktyg ämnat specifikt för Xbox360 och ett måste om man vill kunna utveckla till denna konsol som icke licensierad spelutvecklare. Denna rapport...

  13. Self Oscillating Mixer with Dielectric Resonator for Low Noise Block Application

    Directory of Open Access Journals (Sweden)

    Endon Bharata

    2011-08-01

    Full Text Available In this paper, the development of a self oscillating mixer (SOM as part of a low noise block (LNB for a satellite television receiver is investigated numerically and experimentally. In contrast to other mixers, the developed SOM requires no separate local oscillator as it generates own local oscillator signal. The SOM is developed using a monolithic microwave integrated circuit (MMIC comprised of two bipolar transistors coupled as a Darlington pair and a dielectric resonator to establish a local oscillator signal. The SOM is designed to oscillate at 3.62GHz driven from 50W signal generator. The prototype of SOM is fabricated on a dielectric substrate of glass-reinforced hydrocarbon/ceramic lamination (RO4350B board which has a thickness of 0.762mm and relative permittivity of 3.66. The prototype is then characterized experimentally and exhibits a conversion gain of 8dB with the input and output voltage standing wave ratio (VSWR less than 2 across the 2520MHz to 2670MHz operating frequency band.

  14. Pyrolysis model for an alpha waste incinerator prototype

    International Nuclear Information System (INIS)

    Orloff, D.I.

    1979-01-01

    The development of a theoretical model of the pyrolysis stage of a Savnnah River Laboratory prototype alpha waste incinerator is discussed. pyrolysis rates for single-component porous bed of Teflon (registered trademark of Du Pont de Nemours and Co.) have been measured on a bench-scale furnace. Experimental pyrolysis rates compare favorably to the predictions of a quasisteady regression model. In addition, the pyrolysis rate is shown to be a weak function of the thermal diffusivity of the porous polymer bed. 13 refs

  15. A room-temperature liquid calorimeter prototype for the SSC

    International Nuclear Information System (INIS)

    Brandenburg, G.W.; Geer, S.H.; Oliver, J.; Sadowski, E.; Theriot, D.

    1990-01-01

    Calorimeters will be an extremely important part of SSC detectors as they have been in existing collider detectors. The main issues that need to be addressed are: (1) energy resolution of jets and electrons, (2) segmentation, (3) hermiticity, (4) response time, and (5) radiation resistance. An attractive possibility on all these counts is the use of room-temperature liquids together with uranium, as pioneered by UA1. The authors are planning a prototype calorimeter which consists of a sealed vessel containing both the radiator plates and the readout pads. This geometry has been appropriately named the swimming pool design. The general mechanical starting point is similar to the SLD liquid argon calorimeters. The points they wish to address are the following: (1) Simple and reliable modular construction techniques, (2) Satisfactory electrical connections with minimal geometric impact, (3) The necessity of isolating radiator plates and liquid to maintain purity, (4) What materials can be immersed without compromising the liquid purity. The design and construction of the swimming pool electromagnetic calorimeter prototype is being carried out at the Harvard High Energy Physics Laboratory. This is one of the first attempts to build a full-scale prototype of such a design

  16. En teoretisk utdyping av rom og materialitet som pedagogisk ressurs i barnehagen

    Directory of Open Access Journals (Sweden)

    Solveig Nordtømme

    2015-07-01

    Full Text Available Abstract: This article is a theoretical exploration with the aim of discussing an ontological basis for space and materiality as educational resources in kindergarten. Attention is directed on children’s play experiences interacting with space and materiality, and how children use and create space. The metaphors front stage, space in between, and backstage (inspired from Erving Goffman, 1969, which form the study's main findings, are used as the backdrop for the issue and analyzes. The empirical material used in this exploration has been collected with an ethnographic methodological approach in two kindergartens. Maurice Merleau-Ponty’s (1962 focus on bodily experience and presence in space, along with concepts from Latour’s (2005 actor-network theory, is used to explore the data. The article contributes with theoretical tools for professionals in kindergarten teaching, to shed light on the importance of space, materiality and play in children's everyday life in kindergarten.Sammendrag: Denne artikkelen diskuterer et ontologisk grunnlag og er en teoretisk utforskning av rom og materialitet som en pedagogisk ressurs i barnehagen. Oppmerksomheten er rettet mot barns lekeerfaringer i samspill med rom og materialitet, og hvordan barn bruker og skaper rom. Metaforene hovedrom, mellomrom, og bakrom (inspirert fra Erving Goffman, 1969, som danner studiens hovedfunn, blir brukt som et bakteppe for problemstilling og analyser av det empiriske materialet fra to barnehager. Maurice Merleau-Ponty publikasjoner The Phenomenology of Perception (Merleau-Ponty, 1962 med sitt fokus på kroppslig erfaring i levd rom, blir brukt sammen med begreper fra Latours aktør-nettverksteori (Latour 2005 til å utforske hvordan rom og materialitet kan være pedagogiske ressurser. Artikkelens kunnskapsbidrag er å presentere et teoretisk verktøy for barnehageprofesjonen og kunnskaper om lekens betydning i barns hverdag i barnehagen.

  17. Usefulness of temporal bone prototype for drilling training: A prospective study.

    Science.gov (United States)

    Aussedat, C; Venail, F; Nguyen, Y; Lescanne, E; Marx, M; Bakhos, D

    2017-12-01

    Dissection of cadaveric temporal bones (TBs) is considered the gold standard for surgical training in otology. For many reasons, access to the anatomical laboratory and cadaveric TBs is difficult for some facilities. The aim of this prospective and comparative study was to evaluate the usefulness of a physical TB prototype for drilling training in residency. Prospective study. Tertiary referral centre. Thirty-four residents were included. Seventeen residents (mean age 26.7±1.6) drilled on only cadaveric TBs ("traditional" group), in the traditional training method, while seventeen residents (mean age 26.5±1.7) drilled first on a prototype and then on a cadaveric TB ("prototype" group). Drilling performance was assessed using a validated scale. Residents completed a mastoid image before and after each drilling to enable evaluation of mental representations of the mastoidectomy. No differences were observed between the groups with respect to age, drilling experience and level of residency. Regarding drilling performance, we found a significant difference across the groups, with a better score in the prototype group (P=.0007). For mental representation, the score was statistically improved (P=.0003) after drilling in both groups, suggesting that TB drilling improves the mental representation of the mastoidectomy whether prototype or cadaveric TB is used. The TB prototype improves the drilling performance and mental representation of the mastoidectomy in the young resident population. A drilling simulation with virtual or physical systems seems to be a beneficial tool to improve TB drilling. © 2017 John Wiley & Sons Ltd.

  18. Sandia Agile MEMS Prototyping, Layout Tools, Education and Services Program

    Energy Technology Data Exchange (ETDEWEB)

    Schriner, H.; Davies, B.; Sniegowski, J.; Rodgers, M.S.; Allen, J.; Shepard, C.

    1998-05-01

    Research and development in the design and manufacture of Microelectromechanical Systems (MEMS) is growing at an enormous rate. Advances in MEMS design tools and fabrication processes at Sandia National Laboratories` Microelectronics Development Laboratory (MDL) have broadened the scope of MEMS applications that can be designed and manufactured for both military and commercial use. As improvements in micromachining fabrication technologies continue to be made, MEMS designs can become more complex, thus opening the door to an even broader set of MEMS applications. In an effort to further research and development in MEMS design, fabrication, and application, Sandia National Laboratories has launched the Sandia Agile MEMS Prototyping, Layout Tools, Education and Services Program or SAMPLES program. The SAMPLES program offers potential partners interested in MEMS the opportunity to prototype an idea and produce hardware that can be used to sell a concept. The SAMPLES program provides education and training on Sandia`s design tools, analysis tools and fabrication process. New designers can participate in the SAMPLES program and design MEMS devices using Sandia`s design and analysis tools. As part of the SAMPLES program, participants` designs are fabricated using Sandia`s 4 level polycrystalline silicon surface micromachine technology fabrication process known as SUMMiT (Sandia Ultra-planar, Multi-level MEMS Technology). Furthermore, SAMPLES participants can also opt to obtain state of the art, post-fabrication services provided at Sandia such as release, packaging, reliability characterization, and failure analysis. This paper discusses the components of the SAMPLES program.

  19. Contingency Contractor Optimization Phase 3 Sustainment Platform Requirements - Contingency Contractor Optimization Tool - Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Durfee, Justin David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Frazier, Christopher Rawls [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bandlow, Alisa [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gearhart, Jared Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Katherine A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-06-01

    Sandia National Laboratories (Sandia) is in Phase 3 Sustainment of development of a prototype tool, currently referred to as the Contingency Contractor Optimization Tool - Prototype (CCOTP), under the direction of OSD Program Support. CCOT-P is intended to help provide senior Department of Defense (DoD) leaders with comprehensive insight into the global availability, readiness and capabilities of the Total Force Mix. The CCOT-P will allow senior decision makers to quickly and accurately assess the impacts, risks and mitigating strategies for proposed changes to force/capabilities assignments, apportionments and allocations options, focusing specifically on contingency contractor planning. During Phase 2 of the program, conducted during fiscal year 2012, Sandia developed an electronic storyboard prototype of the Contingency Contractor Optimization Tool that can be used for communication with senior decision makers and other Operational Contract Support (OCS) stakeholders. Phase 3 used feedback from demonstrations of the electronic storyboard prototype to develop an engineering prototype for planners to evaluate. Sandia worked with the DoD and Joint Chiefs of Staff strategic planning community to get feedback and input to ensure that the engineering prototype was developed to closely align with future planning needs. The intended deployment environment was also a key consideration as this prototype was developed. Initial release of the engineering prototype was done on servers at Sandia in the middle of Phase 3. In 2013, the tool was installed on a production pilot server managed by the OUSD(AT&L) eBusiness Center. The purpose of this document is to specify the CCOT-P engineering prototype platform requirements as of May 2016. Sandia developed the CCOT-P engineering prototype using common technologies to minimize the likelihood of deployment issues. CCOT-P engineering prototype was architected and designed to be as independent as possible of the major deployment

  20. Prototyping real-time systems

    OpenAIRE

    Clynch, Gary

    1994-01-01

    The traditional software development paradigm, the waterfall life cycle model, is defective when used for developing real-time systems. This thesis puts forward an executable prototyping approach for the development of real-time systems. A prototyping system is proposed which uses ESML (Extended Systems Modelling Language) as a prototype specification language. The prototyping system advocates the translation of non-executable ESML specifications into executable LOOPN (Language of Object ...

  1. Argonne National Laboratory: Laboratory Directed Research and Development FY 1993 program activities. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1993-12-23

    The purposes of Argonne`s Laboratory Directed Research and Development (LDRD) Program are to encourage the development of novel concepts, enhance the Laboratory`s R&D capabilities, and further the development of its strategic initiatives. Projects are selected from proposals for creative and innovative R&D studies which are not yet eligible for timely support through normal programmatic channels. Among the aims of the projects supported by the Program are establishment of engineering ``proof-of-principle`` assessment of design feasibility for prospective facilities; development of an instrumental prototype, method, or system; or discovery in fundamental science. Several of these projects are closely associated with major strategic thrusts of the Laboratory as described in Argonne`s Five Year Institutional Plan, although the scientific implications of the achieved results extend well beyond Laboratory plans and objectives. The projects supported by the Program are distributed across the major programmatic areas at Argonne as indicated in the Laboratory LDRD Plan for FY 1993.

  2. Tidlige brukere av alkohol – hvem er de? Kjennetegn ved ungdom som starter tidlig med alkohol

    Directory of Open Access Journals (Sweden)

    Anders Grimsmo

    2009-10-01

    Full Text Available  SAMMENDRAGDebutalder med alkoholrus er en sterk prediktor for senere alkoholbruk. I denne undersøkelsen har visammenliknet de som starter med alkohol tidlig og før det er kulturelt akseptert, med ungdommenesom begynner i konfirmasjonsalder og de som utsetter alkoholdebuten. Vi finner at gruppen sombegynner tidlig ikke bare bryter de lokale tradisjonene for alkoholkonsum, men er i opposisjon tilnormer og autoriteter generelt. Alkohol er et positivt symbol for gruppen og det å ruse seg et ritualesom gir mening i deres miljø. Hjemmet står i den sterkeste posisjonen til å kunne utsette ungdommensalkoholdebut. Vi skisserer hvilke implikasjoner dette bør ha for strategien i det forebyggende arbeidet.

  3. Inducción de la embriogénesis somática en mango de hilacha (Mangifera indica L.

    Directory of Open Access Journals (Sweden)

    Margarita Perea Dallos

    2006-01-01

    Full Text Available En esta investigación se estudió el establecimiento de un medio de cultivo para la inducción de la embriogénesis somática a partir de embriones cigóticos y tejido nucelar de frutos inmaduros de mango de hilacha. Se ensayaron nueve tratamientos de desinfección resultantes de la combinación de tres concentraciones de hipoclorito de sodio (2,5, 3,5 y 4,5%, aplicadas durante tres intervalos de tiempo (30, 45 ó 60 min. El medio de cultivo para la inducción de la embriogénesis somática se estableció probando 18 medios de cultivo, cinco adicionados con 0, 0,5, 1,0, 2,0 y 3,0 mg/L de 2,4-D y 13 medios suplementados con 0, 0,5, 1,0, 1,5 y 2,0 mg/L de TDZ en combinación con 0, 1,0 y 2,0 mg/L de 2,4-D.  Adicionalmente, se experimentó con cuatro medios de cultivo adicionados con 0, 0,5, 1,0 y 2,0 mg/L de ácido giberélico para la germinación de los embriones somáticos. Mediante observación, se estudió la influencia de las diferentes concentraciones de ácido diclorofenoxiacético y de thidiazurom sobre los explantes utilizados; adicionalmente, se evaluó la formación de las diferentes etapas de la embriogénesis somática. Por medio de cortes histológicos, se estableció el origen de los embriones somáticos y las diferencias, a nivel celular, entre cada uno de sus estadios. Se estudió el proceso de formación del callo friable y embriogénico. Todos los tratamientos de desinfección fueron igualmente efectivos, pero se recomienda el uso de una concentración de 4,5 % de  hipoclorito de sodio, durante 60 minutos. El medio de cultivo más favorable para la inducción de la embriogénesis somática fue el que contenía 0,5 mg/L de TDZ y 1 mg/L de 2,4-D; y para la germinación, el carente de reguladores de crecimiento. En los medios de cultivo suplementados únicamente con 2,4-D se formaron embriones indirectos, mientras que en los que contenían 2,4-D más TDZ se observaron embriones directos e indirectos, de acuerdo con el regulador

  4. Por que a percussão de uma mola produz o mesmo som de “pistolas laser” do filme Star Wars?

    Directory of Open Access Journals (Sweden)

    Jair Lúcio Prados Ribeiro

    2014-03-01

    Full Text Available http://dx.doi.org/10.5007/2175-7941.2014v31n2p385 Ao se bater lateralmente em uma mola metálica esticada, é produzido  um sibilo,  um  efeito  sonoro  que  se  tornou parte da cultura atual devido à sua popularização como o som de uma “pistola laser” no filme Star Wars. O sibilo ocorre devido à dispersão do som em um metal, mas a revisão de obras didáticas de ensino médio e superior mostra que a discussão desse fenômeno não está presente. Apresentamos uma atividade experimental possível de ser conduzida no ensino médio, a fim de detectar o sibilo e analisá-lo em um programa de edição de som. A análise gráfica permitiu determinar, de forma aproximada, que há uma relação inversamente proporcional entre a frequência do som que se propaga na mola e o tempo de detecção.

  5. Bearing performance degradation assessment based on time-frequency code features and SOM network

    International Nuclear Information System (INIS)

    Zhang, Yan; Tang, Baoping; Han, Yan; Deng, Lei

    2017-01-01

    Bearing performance degradation assessment and prognostics are extremely important in supporting maintenance decision and guaranteeing the system’s reliability. To achieve this goal, this paper proposes a novel feature extraction method for the degradation assessment and prognostics of bearings. Features of time-frequency codes (TFCs) are extracted from the time-frequency distribution using a hybrid procedure based on short-time Fourier transform (STFT) and non-negative matrix factorization (NMF) theory. An alternative way to design the health indicator is investigated by quantifying the similarity between feature vectors using a self-organizing map (SOM) network. On the basis of this idea, a new health indicator called time-frequency code quantification error (TFCQE) is proposed to assess the performance degradation of the bearing. This indicator is constructed based on the bearing real-time behavior and the SOM model that is previously trained with only the TFC vectors under the normal condition. Vibration signals collected from the bearing run-to-failure tests are used to validate the developed method. The comparison results demonstrate the superiority of the proposed TFCQE indicator over many other traditional features in terms of feature quality metrics, incipient degradation identification and achieving accurate prediction. Highlights • Time-frequency codes are extracted to reflect the signals’ characteristics. • SOM network served as a tool to quantify the similarity between feature vectors. • A new health indicator is proposed to demonstrate the whole stage of degradation development. • The method is useful for extracting the degradation features and detecting the incipient degradation. • The superiority of the proposed method is verified using experimental data. (paper)

  6. Legalisering som lösning? Erfarenheter av holländsk eutanasipraxis

    NARCIS (Netherlands)

    Boer, Th.A.

    2002-01-01

    Fastän vi lever i ett Europa som växer samman, så fortsätter dock många gränser att bestå. Vissa skillnader förblir eller har i de förgångna årtiondena till och med blivit djupare. Dödshjälpsdebatterna i Holland och Skandinavien ger oss ett exempel. Två stater med till stor del lika kultur, men

  7. Attribute measurement systems prototypes and equipment in the United States

    International Nuclear Information System (INIS)

    Langner, D.C.; Landry, R.P.; Hsue, S.-T.; MacArthur, D.W.; Mayo, D.R.; Smith, M.K.; Nicholas, N.J.; Whiteson, R.

    2001-01-01

    Since the fall of 1997, the United States has been developing prototypical attribute verification technology for potential use by the International Atomic Energy Agency (IAEA) under the Trilateral Initiative. The first attribute measurement equipment demonstration took place in December 1997 at the Lawrence Livermore National Laboratory. This demonstration led to a series of joint Russian Federatioin/US/IAEA technical discussions that focused on attribute measurement technology that could be applied to plutonium bearing items having classified characteristics. A first prototype attribute verification system with an information barrier was demonstrated at a Trilateral Technical Workshop in June 1999 at Los Alamos. This prototype nourished further fruitful discussions between the three parties that has in turn led to the documents discussed in a previous paper. Prototype development has continued in the US, under other initiatives, using an integrated approach that includes the Trilatleral Initiative. Specifically for the Trilateral Initiative, US development has turned to some peripheral equipment that would support verifications by the IAEA. This equipment includes an authentication tool for measurement systems with information barriers and in situ probes that would facilitate inspections by reducing the need to move material out of storage locations for reverification. In this paper, we will first summarize the development of attribute verification measurement system technology in the US and then report on the status of the development of other equipment to support the Trilateral Initiative.

  8. Indução de embriogênese somática em cana-de-açúcar RB935744

    Directory of Open Access Journals (Sweden)

    Rodrigo de Oliveira Almeida

    2014-06-01

    Full Text Available O objetivo deste trabalho foi avaliar a resposta morfogênica do genótipo RB935744 à indução de embriogênese somática com subsequente regeneração dos embriões. Segmentos transversais de folhas jovens medindo 2-3 mm de espessura foram cultivados em meio MS sólido contendo três diferentes concentrações de ácido 2,4-diclorofenoxiacético (2,4-D para indução de calos embriogênicos. Os melhores resultados foram obtidos usando 31.5 µM L-1 de 2,4-D em 45 ou 60 dias de incubação em meio de indução, realizando de um a três subcultivos e incubando em meio de regeneração por 15 a 45 dias. Este resultado mostra que o protocolo de embriogênese somática para o genótipo RB935744 necessita de ajustes para se alcançar uma satisfatória produção de embriões somáticos.

  9. Engelsk som tredjespråk: Har lærere kompetanse til å støtte flerspråklighet?

    Directory of Open Access Journals (Sweden)

    Anne Dahl

    2016-01-01

    Full Text Available Denne artikkelen handler om norske engelsklæreres kompetanse i å arbeide med barn som har et annet morsmål enn norsk, og som lærer engelsk som fremmedspråk. Problemstillingene er "Hva slags utdanning og kunnskap innen flerspråklighet har engelsklærere i Norge?," "I hvilken grad føler engelsklærere i Norge seg forberedt på å undervise i flerkulturelle og flerspråklige klasserom?" og "Hvilken type kunnskap, ferdigheter og ressurser føler de behov for?". Vi presenterer resultater fra en nasjonal spørreundersøkelse hvor i alt 176 engelsklærere deltok. I tillegg presenterer vi resultater fra fokusintervjuer med i alt fire lærere fra to skoler. Resultatene viser at selv om engelsklærerne til en viss grad føler seg forberedt på arbeid med elever som ikke har norsk som morsmål, har svært få av dem utdanning som fokuserer på flerspråklighet. Svarene fra spørreundersøkelsen og fra intervjuene viser at engelsklærerne gjerne vil ha mer kompetanse på dette området. Vi vil derfor understreke betydningen av utdanning i teori og praksis om flerspråklig utvikling og flerkulturell utdanningsteori, og ikke minst betydningen av tilgang til faglig utvikling som fokuserer på flerspråklighet i skolen og i samfunnet for engelsklærere i Norge.Nøkkelord: engelsklærere, kompetanse, språkpedagogisk kunnskap,flerspråklighet, lærerutdanningAbstractThis paper examines the extent to which English teachers in Norway are prepared to work with children whose mother tongue is not Norwegian, and who are acquiring English as a foreign language. The research questions are “What type of education and knowledge in the area of multilingualism do English teachers in Norway have?,” To what extent do English teachers in Norway feel they are prepared to teach in a multicultural and multilingual classroom?,” and “What kinds of knowledge, skills and resources do they feel a need for?” We present the results of a national survey completed by 176

  10. Summary report on safety and licensing strategy support for the ABR prototype

    International Nuclear Information System (INIS)

    Cahalan, J. E.; Nuclear Engineering Division

    2007-01-01

    Argonne National Laboratory is providing support to the US Department of Energy in the Global Nuclear Energy Partnership (GNEP) in certification of an advanced, sodium-cooled fast reactor. The reactor is to be constructed as a prototype for future commercial power reactors that will produce electricity while consuming actinides recovered from light water reactor spent fuel. This prototype reactor has been called the Advanced Burner Reactor, or ABR, and is now often referred to as the advanced recycle reactor. As part of its activities, Argonne is providing technical services to assist definition of a safety and licensing strategy for the ABR prototype, and to further implementation of the strategy. In FY06, an organizational meeting was held for DOE and its laboratory contractors to discuss licensing alternatives and review previous licensing experience for the Fast Flux Test Facility (FFTF) and the Clinch River Breeder Reactor Plant (CRBRP). Near the end of FY06, a report summarizing the discussions and conclusions was written. One of the top-level conclusions recorded in the report was a recommendation to follow a licensing strategy that included the US Nuclear Regulatory Commission (NRC) as the regulatory review and licensing authority. In FY07, activities ar Argonne to support safety and licensing progress have continued. These activities have focused on further evaluation of licensing alternatives; assessment of design, analysis, and documentation implications of licensing paths; and initial technical interactions with the Nuclear Regulatory Commission. This report summarizes FY07 activities

  11. Faults detection approach using PCA and SOM algorithm in PMSG-WT system

    Directory of Open Access Journals (Sweden)

    Mohamed Lamine FADDA

    2016-07-01

    Full Text Available In this paper, a new approach for faults detection in observable data system wind turbine - permanent magnet synchronous generator (WT-PMSG, the studying objective, illustrate the combination (SOM-PCA to build Multi-local-PCA models faults detection in system (WT-PMSG, the performance of the method suggested to faults detection in system data, finding good results in simulation experiment.

  12. Imagining the prototype

    OpenAIRE

    Brouwer, C. E.; Bhomer, ten, M.; Melkas, H.; Buur, J.

    2013-01-01

    This article reports on the analysis of a design session, employing conversation analysis. In the design session three experts and a designer discuss a prototype of a shirt, which has been developed with the input from these experts. The analysis focuses on the type of involvement of the participants with the prototype and how they explicate the points they make in the discussion with or without making use of the prototype. Three techniques for explicating design issues that exploit the proto...

  13. Förändring av förpackning som utökning av marknadsmixen : En studie av fem snabbrörliga konsumentvaror inom livsmedelsbranschen

    OpenAIRE

    Sandström, Carolina; Eriksson, Sofie

    2011-01-01

    Denna uppsats behandlar förändring av förpackning som en möjlig utökning av produktkategorin i Kotler & Kellers utvidgade marknadsmix. I marknadsmixen behandlas förpackningen som statisk under en varas livstid och studiens syfte var att se om förpackningsförändringar istället bör ske vid flertalet tillfällen. Genom existerande litteratur identifierades tre centrala begrepp som ansågs betydelsefulla för studien; förpackning, förändring av förpackning och differentiering. Fem olika företag ...

  14. Arbeid som berører : en studie av miljøarbeideres møter med ungdom på ungdomshjem

    OpenAIRE

    Viervang, Irene

    2008-01-01

    Master i sosialt arbeid Det er miljøarbeideres fortellinger om relasjonen og møtet med ungdommer på institusjon som mitt blikk er rettet mot i denne studien. Det settes derfor søkelys på interaksjonen mellom miljøarbeideren og ungdommer, og spesielt hvordan denne berører miljøarbeideren. Dette er en kvalitativ undersøkelse hvor jeg intervjuer syv miljøarbeidere som arbeider på fire forskjellige ungdomshjem. Alle informantene hadde sosialfaglig utdanning og praksiserfaring fr...

  15. Inducción de la embriogénesis somática en mango de hilacha (Mangifera indica L.)

    OpenAIRE

    Margarita Perea Dallos

    2006-01-01

    En esta investigación se estudió el establecimiento de un medio de cultivo para la inducción de la embriogénesis somática a partir de embriones cigóticos y tejido nucelar de frutos inmaduros de mango de hilacha. Se ensayaron nueve tratamientos de desinfección resultantes de la combinación de tres concentraciones de hipoclorito de sodio (2,5, 3,5 y 4,5%), aplicadas durante tres intervalos de tiempo (30, 45 ó 60 min). El medio de cultivo para la inducción de la embriogénesis somática se estable...

  16. dc readout experiment at the Caltech 40m prototype interferometer

    International Nuclear Information System (INIS)

    Ward, R L; Adhikari, R; Abbott, B; Abbott, R; Bork, R; Fricke, T; Heefner, J; Ivanov, A; Miyakawa, O; Smith, M; Taylor, R; Vass, S; Waldman, S; Weinstein, A; Barron, D; Frolov, V; McKenzie, K; Slagmolen, B

    2008-01-01

    The Laser Interferometer Gravitational Wave Observatory (LIGO) operates a 40m prototype interferometer on the Caltech campus. The primary mission of the prototype is to serve as an experimental testbed for upgrades to the LIGO interferometers and for gaining experience with advanced interferometric techniques, including detuned resonant sideband extraction (i.e. signal recycling) and dc readout (optical homodyne detection). The former technique will be employed in Advanced LIGO, and the latter in both Enhanced and Advanced LIGO. Using dc readout for gravitational wave signal extraction has several technical advantages, including reduced laser and oscillator noise couplings as well as reduced shot noise, when compared to the traditional rf readout technique (optical heterodyne detection) currently in use in large-scale ground-based interferometric gravitational wave detectors. The Caltech 40m laboratory is currently prototyping a dc readout system for a fully suspended interferometric gravitational wave detector. The system includes an optical filter cavity at the interferometer's output port, and the associated controls and optics to ensure that the filter cavity is optimally coupled to the interferometer. We present the results of measurements to characterize noise couplings in rf and dc readout using this system

  17. A biometric approach to laboratory rodent identification.

    Science.gov (United States)

    Cameron, Jens; Jacobson, Christina; Nilsson, Kenneth; Rögnvaldsson, Thorsteinn

    2007-03-01

    Individual identification of laboratory rodents typically involves invasive methods, such as tattoos, ear clips, and implanted transponders. Beyond the ethical dilemmas they may present, these methods may cause pain or distress that confounds research results. The authors describe a prototype device for biometric identification of laboratory rodents that would allow researchers to identify rodents without the complications of other methods. The device, which uses the rodent's ear blood vessel pattern as the identifier, is fast, automatic, noninvasive, and painless.

  18. An open microcomputer-based laboratory system for perceptional experimentality

    Science.gov (United States)

    Hamalainen, Ari

    A computer, equipped with hardware for acquiring data about the properties of a physical system and programs for processing that data, is a powerful tool for physics research and instruction. There is strong evidence that utilizing microcomputer-based laboratories (MBLs) in instruction can lead to significantly improved learning. The perceptional approach is a method for physics instruction, developed at the Department of Physics, University of Helsinki. Its main arguments are that the meanings of the concepts must be learnt before their formal definitions and adoption, and that learning and research are fundamentally similar concept formation processes. Applying the perceptional approach requires the ability to perform quantitative experiments, either as students' laboratory exercises or as lecture demonstrations, and to process their results. MBL tools are essential for this. In student's laboratory exercises, they reduce the routine work and leave more time for the actual learning. In lecture demonstrations, they make it possible to perform the experiments in the tight time limits. At a previous stage of the research, a set of requirements was found that the perceptional approach places on MBL systems. The primary goal of this thesis is to build a prototype of a MBL system that would fulfil these requirements. A secondary goal is to describe technical aspects of a computerized measurement system from the standpoint of educational use. The prototype was built using mostly commercial sensors and data acquisition units. The software was written with a visual programming language, designed for instrumentation applications. The prototype system was developed and tested with a set of demonstrations of various topics in the Finnish high school physics curriculum, which were implemented according to the perceptional approach. Limited usability tests were also performed. The prototype was improved, until it could perform the test demonstrations. It was found to meet the

  19. ADHD SOM SOCIALT OG KULTURELT FÆNOMEN

    DEFF Research Database (Denmark)

    Berger, Nichlas Permin

    Der har i Danmark de seneste årtier været en eksplosiv vækst i antallet af mennesker, der stilles en ADHD-diagnose. Der eksisterer et væld af forskellige bud på forklaringer på dette fænomen. Lige fra epidemiologiske og medicinske tolkninger, der peger på, at mennesker generelt er blevet mere syge...... at forbinde psykiske lidelser, herunder i væsentlig grad ADHD, som en risikofaktor for kriminalitet, antisocial adfærd, misbrug og en række andre sociale problemer. Med interesse i dette komplekse fænomen belyses empirisk den sociale og kulturelle forudsætning for ADHD-diagnosen i Kriminalforsorgens...... institutioner i en kulturanalytisk og socialkonstruktivistisk optik. Afhandlingen undersøger, hvordan ADHD og kriminalitet diskursivt kobles sammen af voksne kriminelle med en ADHD-diagnose og frontmedarbejdere i Kriminalforsorgen....

  20. Prototyping Advanced Control Systems on FPGA

    Directory of Open Access Journals (Sweden)

    Simard Stéphane

    2009-01-01

    Full Text Available In advanced digital control and mechatronics, FPGA-based systems on a chip (SoCs promise to supplant older technologies, such as microcontrollers and DSPs. However, the tackling of FPGA technology by control specialists is complicated by the need for skilled hardware/software partitioning and design in order to match the performance requirements of more and more complex algorithms while minimizing cost. Currently, without adequate software support to provide a straightforward design flow, the amount of time and efforts required is prohibitive. In this paper, we discuss our choice, adaptation, and use of a rapid prototyping platform and design flow suitable for the design of on-chip motion controllers and other SoCs with a need for analog interfacing. The platform consists of a customized FPGA design for the Amirix AP1000 PCI FPGA board coupled with a multichannel analog I/O daughter card. The design flow uses Xilinx System Generator in Matlab/Simulink for system design and test, and Xilinx Platform Studio for SoC integration. This approach has been applied to the analysis, design, and hardware implementation of a vector controller for 3-phase AC induction motors. It also has contributed to the development of CMC's MEMS prototyping platform, now used by several Canadian laboratories.

  1. Supporting Active User Involvment in Prototyping

    DEFF Research Database (Denmark)

    Grønbæk, Kaj

    1990-01-01

    The term prototyping has in recent years become a buzzword in both research and practice of system design due to a number of claimed advantages of prototyping techniques over traditional specification techniques. In particular it is often stated that prototyping facilitates the users' involvement...... in the development process. But prototyping does not automatically imply active user involvement! Thus a cooperative prototyping approach aiming at involving users actively and creatively in system design is proposed in this paper. The key point of the approach is to involve users in activities that closely couple...... development of prototypes to early evaluation of prototypes in envisioned use situations. Having users involved in such activities creates new requirements for tool support. Tools that support direct manipulation of prototypes and simulation of behaviour have shown promise for cooperative prototyping...

  2. Med fodbold som "hook" - et udviklingsprojekt på tværs af grænser

    DEFF Research Database (Denmark)

    Klausen, Bodil; Greve, Charlotte

    2009-01-01

    Artiklen beskriver et socialt innovationsprojekt som udspringer af et samarbejde mellem de to fodboldklubber: Premier League-fodboldklubben West Ham United fra East London og fodboldklubben AC Horsens & de to uddannelsesinstitutioner: VIA University College, Pædagoguddannelsen i Gedved og Univers...

  3. Palaeocene-early Eocene inversion of the Phuquoc-Kampot Som Basin

    DEFF Research Database (Denmark)

    Fyhn, Michael B. W.; Pedersen, Stig A.S.; Boldreel, Lars Ole

    2010-01-01

    /Pb analysis is used to unravel the basin history. This reveals a hitherto unknown earliest Palaeogene basin inversion associated with the Luconian suturing to SE Asia and the shutdown of palaeo-Pacific subduction underneath SE Asia. The Phuquoc–Kampot Som Basin and the Khorat Basin in Thailand constitute...... the erosional remnants of a larger basin that covered large parts of SE Asia in Late Mesozoic time, and subsequently became segregated during earliest Palaeogene inversion and erosion. Inversion was focused along the several hundred kilometres long Kampot and Khmer–Chanthaburi fold belts that confine...

  4. Latest developments on the highly granular Silicon-Tungsten Electromagnetic Calorimeter technological prototype for the International Large Detector

    CERN Document Server

    Irles, Adrián

    2017-01-01

    High precision physics at future colliders requires unprecedented highly granular calorimeters for the application of the Particle Flow (PF) algorithm. The physical proof of concept was given in the previous campaign of beam tests of physic prototypes within the CALICE collaboration. We present here the latest beam and laboratory test results and R&D developments for the Silicon-Tungsten Electromagnetic Calorimeter technological prototype with fully embedded very front-end (VFE) electronics for the International Large Detector at the International Linear Collider project.

  5. Embriogénesis somática secundaria en el genotipo de cacao (Theobroma cacao L.) inifap 1 y su descripción histológica

    OpenAIRE

    Lázaro, A. Alejandro; Azpeitia-Morales, A.; Sáenz-Carbonell, L.; Mirafuentes Hernández, F.

    2015-01-01

    La embriogénesis somática aplicada para la propagación clonal de plantas de cacao, aun es de baja eficiencia, por lo que el objetivo de esta investigación fue evaluar la respuesta de los cotiledones procedentes de embriones somáticos primarios como fuente de explante para inducir embriogénesis somática secundaria (ESS) en presencia de fitohormonas y sin estas en el genotipo de cacao inifap 1, asi como describir los eventos de la ESS desde los 30 hasta los 240 días de cultivo. El uso de las fi...

  6. Embriogénesis somática secundaria en el genotipo de cacao (Theobroma cacao L.) inifap 1 y su descripción histológica

    OpenAIRE

    A. Alejandro-Lázaro; A. Azpeitia-Morales; L. Sáenz-Carbonell; F . Mirafuentes Hernández

    2015-01-01

    La embriogénesis somática aplicada para la propagación clonal de plantas de cacao, aun es de baja eficiencia, por lo que el objetivo de esta investigación fue evaluar la respuesta de los cotiledones procedentes de embriones somáticos primarios como fuente de explante para inducir embriogénesis somática secundaria (ESS) en presencia de fitohormonas y sin estas en el genotipo de cacao inifap 1, asi como describir los eventos de la ESS desde los 30 hasta los 240 días de cultivo. El uso de l...

  7. Advanced Prototype Fan Operating Experience, Post Test Evaluation, and Refurbishment for PLSS 2.0 Test Use

    Science.gov (United States)

    Hodgson, Edward; Oehler, William; Dionne, Steve; Converse, David; Jennings, Mallory A.

    2012-01-01

    NASA s plans for Extravehicular Activity (EVA) portable life support systems for future exploration missions result in different design requirements than those which led to the combined fan / pump / separator in the current ISS Extravehicular Mobility Unit (EMU). To meet these new requirements, NASA contracted with Hamilton Sundstrand to provide two new prototype fans designed to meet anticipated future system requirements. Based on design trade studies, a high speed fan with mechanical bearing support of the rotating elements and a novel non-metallic barrier canned motor design was developed and implemented in the deliverable prototypes. The prototypes, which used two different bearing lubricants, have been extensively tested in both stand-alone and integrated system tests in NASA laboratories and proven to meet the anticipated performance requirements. Subsequently, they have been subjected to post test inspection and analysis in Hamilton Sundstrand laboratories to assess the effects of integrated operation and resultant exposure to vent loop contaminants. Results have confirmed expectations that one of the lubricants would be superior in this application and the prototype fans have been reassembled with new bearings with the superior lubricant. They have now been returned to the Johnson Space Center for further testing and maturation as part of NASA s PLSS 2.0 integrated test effort. This paper will discuss the test history of these units, resulting test data, the results of post test evaluation, and plans for further testing in the near future.

  8. 3 Years Experience with Energy Production on the Nissum Bredning Wave Dragon Prototype

    DEFF Research Database (Denmark)

    Frigaard, Peter; Tedd, James; Kofoed, Jens Peter

    2006-01-01

    Wave Dragon is a floating wave energy converter working by extracting energy principally by means of overtopping of waves into a reservoir. A 1:4.5 scale prototype has been sea tested for 20 months. This paper presents results from testing, experiences gained and developments made during this ext......Wave Dragon is a floating wave energy converter working by extracting energy principally by means of overtopping of waves into a reservoir. A 1:4.5 scale prototype has been sea tested for 20 months. This paper presents results from testing, experiences gained and developments made during...... this extended period. The prototype is highly instrumented. The overtopping characteristic and the power produced are presented here. This has enabled comparison between the prototype and earlier results from both laboratory model and computer simulation. This gives the optimal operating point and the expected...... power of the device. The project development team has gained much soft experience from working in the harsh offshore environment. In particular the effect of marine growth in the draft tubes of the turbines has been investigated. The control of the device has been a focus for development as is operates...

  9. A prototype sensor system for the early detection of microbially linked spoilage in stored wheat grain

    Science.gov (United States)

    de Lacy Costello, B. P. J.; Ewen, R. J.; Gunson, H.; Ratcliffe, N. M.; Sivanand, P. S.; Spencer-Phillips, P. T. N.

    2003-04-01

    Sensors based on composites of metal oxides were fabricated and tested extensively under high-humidity and high-flow conditions with exposure to vapours reported to increase in the headspace of wheat grain (Triticum aestivum cv Hereward) colonized by fungi. The sensors that exhibited high sensitivity to target vapours combined with high stability were selected for inclusion into a four-sensor array prototype system. A sampling protocol aligned to parallel gas chromatography-mass spectrometry and human olfactory assessment studies was established for use with the sensor system. The sensor system was utilized to assess irradiated wheat samples that had been conditioned to 25% moisture content and inoculated with pathogens known to cause spoilage of grain in storage. These included the fungi Penicillium aurantiogriseum, Penicillium vulpinum, Penicillium verrucosum, Fusarium culmorum, Aspergillus niger, and Aspergillus flavus and the actinomycete, Streptomyces griseus. The sensor system successfully tracked the progress of the infections from a very early stage and the results were compared with human olfactory assessment panels run concurrently. A series of dilution studies were undertaken using previously infected grain mixed with sound grain, to improve the sensitivity and maximize the differentiation of the sensor system. An optimum set of conditions including incubation temperature, incubation time, sampling time, and flow rate were ascertained utilizing this method. The sensor system differentiated samples of sound grain from samples of sound grain with 1% (w/w) fungus infected grain added. Following laboratory trials, the prototype sensor system was evaluated in a commercial wheat grain intake facility. Thresholds calculated from laboratory tests were used to differentiate between sound and infected samples (classified by intake laboratory technicians) collected routinely from trucks delivering grain for use in food manufacture. All samples identified as having

  10. Er internethandel kommet for at blive? Eller er det bare krisen som kradser?

    DEFF Research Database (Denmark)

    Ivang, Reimer

    2012-01-01

    I de seneste dage har Jyllandsposten sat fokus på, at omsætningen i den danske detailhandel falder, der fyres, der spares, og det bliver endnu værre i de kommende måneder og år. I artiklen udråbes finanskrisen, som den store skurk, men er det nu den fulde sandhed?...

  11. Computer assisted instruction in the general chemistry laboratory

    Science.gov (United States)

    Pate, Jerry C.

    This dissertation examines current applications concerning the use of computer technology to enhance instruction in the general chemistry laboratory. The dissertation critiques widely-used educational software, and explores examples of multimedia presentations such as those used in beginning chemistry laboratory courses at undergraduate and community colleges. The dissertation describes a prototype compact disc (CD) used to (a) introduce the general chemistry laboratory, (b) familiarize students with using chemistry laboratory equipment, (c) introduce laboratory safety practices, and (d) provide approved techniques for maintaining a laboratory notebook. Upon completing the CD portion of the pre-lab, students are linked to individual self-help (WebCT) quizzes covering the information provided on the CD. The CD is designed to improve student understanding of basic concepts, techniques, and procedures used in the general chemistry laboratory.

  12. EPCiR prototype

    DEFF Research Database (Denmark)

    2003-01-01

    A prototype of a residential pervasive computing platform based on OSGi involving among other a mock-up of an health care bandage.......A prototype of a residential pervasive computing platform based on OSGi involving among other a mock-up of an health care bandage....

  13. Direct containment heating experiments in Zion Nuclear Power Plant geometry using prototypic materials

    International Nuclear Information System (INIS)

    Binder, J.L.; McUmber, L.M.; Spencer, B.W.

    1993-01-01

    Direct Containment Heating (DCH) experiments have been completed which utilize prototypic core materials. The experiments reported on here are a continuation of the Integral Effects Testing (IET) DCH program. The experiments incorporated a 1/40 scale model of the Zion Nuclear Power Plant containment structures. The model included representations of the primary system volume, RPV lower head, cavity and instrument tunnel, and the lower containment structures. The experiments were steam driven. Iron-alumina thermite with chromium was used as a core melt stimulant in the earlier IET experiments. These earlier IET experiments at Argonne National Laboratory (ANL) and Sandia National Laboratories (SNL) provided useful data on the effect of scale on DCH phenomena; however, a significant question concerns the potential experiment distortions introduced by the use of non-prototypic iron/alumina thermite. Therefore, further testing with prototypic materials has been carried out at ANL. Three tests have been completed, DCH-U1A, U1B and U2. DCH-U1A and U1B employed an inerted containment atmosphere and are counterpart to the IET-1RR test with iron/alumina thermite. DCH-U2 employed nominally the same atmosphere composition of its counterpart iron/alumina test, IET-6. All tests, with prototypic material, have produced lower peak containment pressure rises; 45, 111 and 185 kPa in U1A, U1B and U2, compared to 150 and 250 kPa IET-1RR and 6. Hydrogen production, due to metal-steam reactions, was 33% larger in U1B and U2 compared to IET-1RR and IET-6. The pressurization efficiency was consistently lower for the corium tests compared to the IET tests

  14. Prototype explosives detection system based on nuclear resonance absorption in nitrogen

    International Nuclear Information System (INIS)

    Morgado, R.E.; Arnone, G.J.; Cappiello, C.C.

    1996-01-01

    A laboratory prototype system has been developed for the experimental evaluation of an explosives detection technique based on nuclear resonance absorption of gamma rays in nitrogen. Major subsystems include a radiofrequency quadrupole proton accelerator and associated beam transport system, a high-power gamma-ray production target, an airline-luggage tomographic inspection system, and an image- processing/detection-alarm subsystem. The detection system performance, based on a limited experimental test, is reported

  15. Fast-prototyping of VLSI

    International Nuclear Information System (INIS)

    Saucier, G.; Read, E.

    1987-01-01

    Fast-prototyping will be a reality in the very near future if both straightforward design methods and fast manufacturing facilities are available. This book focuses, first, on the motivation for fast-prototyping. Economic aspects and market considerations are analysed by European and Japanese companies. In the second chapter, new design methods are identified, mainly for full custom circuits. Of course, silicon compilers play a key role and the introduction of artificial intelligence techniques sheds a new light on the subject. At present, fast-prototyping on gate arrays or on standard cells is the most conventional technique and the third chapter updates the state-of-the art in this area. The fourth chapter concentrates specifically on the e-beam direct-writing for submicron IC technologies. In the fifth chapter, a strategic point in fast-prototyping, namely the test problem is addressed. The design for testability and the interface to the test equipment are mandatory to fulfill the test requirement for fast-prototyping. Finally, the last chapter deals with the subject of education when many people complain about the lack of use of fast-prototyping in higher education for VLSI

  16. Efeitos do som basal em fendas glóticas Effects of vocal fry incomplete glottal closure

    Directory of Open Access Journals (Sweden)

    Geovana de Paula Bolzan

    2008-01-01

    Full Text Available TEMA: som basal em fendas glóticas. PROCEDIMENTOS: participaram desta pesquisa dois sujeitos do sexo feminino, com idades entre 20 e 40 anos e diagnóstico otorrinolaringológico de fenda em ampulheta. Houve gravação da emissão sustentada da vogal /a/ e exame videolaringoestroboscópico, imediatamente a seguir, os sujeitos realizaram o som basal em três séries de 15 repetições, e foram submetidos a novo exame laríngeo e gravação da vogal. Os dados pré e pós-realização do som basal foram submetidos às analises acústica, perceptivo-auditiva e videolaringoestroboscópica, realizadas por juízes (três fonoaudiólogas e três otorrinolaringologistas, respectivamente. RESULTADOS: em ambos os sujeitos, houve melhora no fechamento glótico e amplitude de vibração da mucosa das pregas vocais; piora no tipo de voz; aumento das medidas de ruído e de Jitter. CONCLUSÃO: o som basal promoveu redução das fendas glóticas e aumento da amplitude de vibração da mucosa das pregas vocais; piora do tipo de voz, que ficou mais ruidoso; aumento das medidas de ruído e de Jitter, sugerindo irregularidade vibratória, provavelmente devido ao efeito do ajuste do som basal ao mobilizar intensamente a mucosa.BACKGROUND: vocal fry in incomplete glottal closure. PROCEDURE: two individuals aged between 20 and 40 years old presenting an otolaryngological diagnosis of ampoule chink were part of the study. A recording of the sustained emission of /a/ vowel took place, as well as a videostroboscopic examination. Right after, the individuals completed the vocal fry in three series of 15 repetitions, being submitted to a new laryngeal examination and to the vowel’s recording. Both pre-vocal and post vocal fry data were assessed through acoustic, perceptive-auditive and videostroboscopic analysis, carried out by judges (three speech and language pathologists and three otolaryngologists, respectively. RESULTS: for both individuals, there was an improvement

  17. Innovative technology summary report: Road Transportable Analytical Laboratory (RTAL)

    International Nuclear Information System (INIS)

    1998-10-01

    The Road Transportable Analytical Laboratory (RTAL) has been used in support of US Department of Energy (DOE) site and waste characterization and remediation planning at Fernald Environmental Management Project (FEMP) and is being considered for implementation at other DOE sites, including the Paducah Gaseous Diffusion Plant. The RTAL laboratory system consists of a set of individual laboratory modules deployable independently or as an interconnected group to meet each DOE site's specific analysis needs. The prototype RTAL, deployed at FEMP Operable Unit 1 Waste Pits, has been designed to be synergistic with existing analytical laboratory capabilities, thereby reducing the occurrence of unplanned rush samples that are disruptive to efficient laboratory operations

  18. Bilderboken ur ett genusperspektiv : En bilderboksanalys av tre svenska böcker som utmanar stereotypa könsroller

    OpenAIRE

    Malmqvist, Hanna

    2015-01-01

    Syftet med denna studie är att se hur några bilderböcker utmanar de stereotypa könsrollerna. Jag kommer att granska hur pojkar och flickor framställs ur ett genusperspektiv och även titta på hur text och bild kompletterar varandra, med hjälp av Nikolajevas (2000) analysmodell för bilderböcker. Jag har valt att analysera tre stycken böcker och två av dessa har pojkar som huvudkaraktärer och en har en flicka som huvudkaraktär. Med den medvetenhet man har idag kring genus så kan dessa böcker var...

  19. NeuLAND MRPC-based detector prototypes tested with fast neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Caesar, C., E-mail: c.caesar@gsi.de [GSI Helmholtzzentrum fuer Schwerionenforschung, Darmstadt (Germany); Aumann, T. [GSI Helmholtzzentrum fuer Schwerionenforschung, Darmstadt (Germany); Bemmerer, D. [Forschungszentrum Dresden-Rossendorf, Dresden (Germany); Boretzky, K. [GSI Helmholtzzentrum fuer Schwerionenforschung, Darmstadt (Germany); Elekes, Z. [Forschungszentrum Dresden-Rossendorf, Dresden (Germany); ATOMKI, Debrecen (Hungary); Gonzalez-Diaz, D.; Hehner, J.; Heil, M. [GSI Helmholtzzentrum fuer Schwerionenforschung, Darmstadt (Germany); Kempe, M. [Forschungszentrum Dresden-Rossendorf, Dresden (Germany); Maroussov, V. [Universitaet zu Koeln, Koeln (Germany); Nusair, O. [GSI Helmholtzzentrum fuer Schwerionenforschung, Darmstadt (Germany); Al-Balqa Applied University, Salt (Jordan); Reifarth, R.; Rossi, D.; Simon, H. [GSI Helmholtzzentrum fuer Schwerionenforschung, Darmstadt (Germany); Stach, D.; Wagner, A.; Yakorev, D. [Forschungszentrum Dresden-Rossendorf, Dresden (Germany); Zilges, A. [ATOMKI, Debrecen (Hungary)

    2012-01-01

    Recent results from a first irradiation of multi-gap resistive plate chambers with fast neutrons are presented. The counters have been built at GSI and FZD. The experiment was performed at the 'The Svedberg Laboratory' (TSL) in Uppsala, Sweden, utilizing a quasi-monoenergetic neutron beam with an energy E{sub n}=175 MeV. For a 2 Multiplication-Sign 4 gap prototype operated at E=100 kV/cm, an efficiency of (0.77 {+-}0.33)% was measured.

  20. Konstruktionen af it-systemet ”Digitalisering – Udsatte Børn og Unge” som løsningen på problemer i den socialfaglige sagsbehandling

    DEFF Research Database (Denmark)

    Fahnøe, Kristian

    2015-01-01

    Denne artikel undersøger hvordan it-systemet ”Digitalisering – Udsatte Børn og Unge” (DUBU) konstrueres som løsning på problemer på området vedrørende udsatte børn og unge. It-systemet, der skal bidrage til digitalisering af den kommunale sagsbehandling på området, er udviklet i et nationalt...... at løse via digitalisering, der fremstår som en simpel løsning. Med det afsæt undersøges to påstande om it-DUBU, der i forbindelse med udviklingen og implementeringen fremstiller systemet som relevant og attraktiv for kommunerne. Den først påstand er, at digitaliseringen med DUBU kan reducere udgifterne...

  1. Embriogénesis somática secundaria en el genotipo de cacao (Theobroma cacao L. inifap 1 y su descripción histológica

    Directory of Open Access Journals (Sweden)

    A. Alejandro-Lázaro

    2015-01-01

    Full Text Available La embriogénesis somática aplicada para la propagación clonal de plantas de cacao, aun es de baja eficiencia, por lo que el objetivo de esta investigación fue evaluar la respuesta de los cotiledones procedentes de embriones somáticos primarios como fuente de explante para inducir embriogénesis somática secundaria (ESS en presencia de fitohormonas y sin estas en el genotipo de cacao inifap 1, asi como describir los eventos de la ESS desde los 30 hasta los 240 días de cultivo. El uso de las fitohormonas ácido 2,4-Diclorofenoxiácetico (2,4-D y thidiazuron (TDZ son importantes para inducir la embriogénesis somática (ES primaria en cacao. Adicionalmente para generar la ESS se han utilizado fitohormonas. En la presente investigación, fueron establecidos cuatro tratamientos con fregmentos de cotiledón, con 2,4-D y TDZ en forma combinada e independiente, incluyendo un testigo sin fitohormonas. Los resultados mostraron, que los fragmentos de cotiledón cultivados sin fitohormonas favorece la ESS, obteniendo un promedio de seis embriones somáticos secundarios (ESs a los 210 días de cultivo contra uno para el tratamiento suplementado con TDZ. El meristemo apical y radicular se presentó en un periodo de 240 días, se observaron embriones somáticos con estructuras externas como: cotiledones, ápices y raíces. Los resultados mostraron que la exclusión del 2,4-D y el thidiazuron no son importantes para inducir la ESS. El mayor número de ESs se encontró en un medio desprovisto de fitohormonas por lo que esta información es relevante, debido a que los explantes de cotiledones procedentes de embriones somáticos primarios, generan mayor número de ESs en esta especie. Estos resultados constituyen el primer reporte de la inducción de la ESs sin fitohormonas.

  2. Prototype particulate stack sampler with single-cut nozzle and microcomputer calculating/display system

    International Nuclear Information System (INIS)

    Eler, J.C.; Littlefield, L.G.; Tillery, M.I.

    1979-01-01

    A prototype particulate stack sampler (PPSS) has been developed to improve on the existing EPA Method 5 sampling apparatus. Its primary features are (1) higher sampling rate (56 1/min); (2) display (on demand) of all required variables and calculated values by a microcomputer-based calculating and display system; (3) continuous stack gas moisture determination; (4) a virtual impactor nozzle with 3 μm mass median diameter cutpoint which collects fine and coarse particle fractions on separate glass fiber filters; (5) a variable-area inlet to maintain isokinetic sampling conditions; and (6) conversion to stainless steel components from the glass specified by EPA Method 5. The basic sampling techniques of EPA Method 5 have been retained; however, versatility in the form of optional in-stack filters and general modernization of the stack sampler have been provided in the prototype design. Laboratory testing with monodisperse dye aerosols has shown the present variable inlet, virtual impactor nozzle to have a collection efficiency which is less than 77% and significant wall losses. This is primarily due to lack of symmetry in this rectangular jet impactor and short transition lengths dictated by physical design constraints (required passage of the nozzle through a 7.6 cm (3 in) diameter stack port). Electronic components have shown acceptable service in laboratory testing although no field testing of the prototype under a broad range of temperature, humidity, and SO 2 concentration has been undertaken

  3. Development and prototype testing of MgCl 2 /graphite foam latent heat thermal energy storage system

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Dileep; Yu, Wenhua; Zhao, Weihuan; Kim, Taeil; France, David M.; Smith, Roger K.

    2018-01-01

    Composites of graphite foam infiltrated with a magnesium chloride phase-change material have been developed as high-temperature thermal energy storage media for concentrated solar power applications. This storage medium provides a high thermal energy storage density, a narrow operating temperature range, and excellent heat transfer characteristics. In this study, experimental investigations were conducted on laboratory-scale prototypes with magnesium chloride/graphite foam composite as the latent heat thermal energy storage system. Prototypes were designed and built to monitor the melt front movement during the charging/discharging tests. A test loop was built to ensure the charging/discharging of the prototypes at temperatures > 700 degrees C. Repeated thermal cycling experiments were carried out on the fabricated prototypes, and the experimental temperature profiles were compared to the predicted results from numerical simulations using COMSOL Multiphysics software. Experimental results were found to be in good agreement with the simulations to validate the thermal models.

  4. Lean i Norge : opplever norske bedrifter som er mer lean, større økning i kundetilfredshet enn de som er mindre lean?

    OpenAIRE

    Fagereng, Hanne Eline; Askevold, Elisabeth Cathrine

    2010-01-01

    Vi ønsker å måle i hvor stor grad norske bedrifter har implementert lean, og for å måle grad av lean har vi utviklet et rammeverk basert på lean teori. Hovedformålet med lean er å øke kundeverdi med minst mulig ressursbruk, anstrengelse, energi, utstyr, tid, plass, material og kapital (Womack, Roos and Jones 2007). Vi vil utforske om høyere grad av lean fører til mer tilfredse kunder enn de som har lavere grad av lean. Altså om hovedformålet med lean blir oppnådd hvis man implementerer lean i...

  5. Tv-serien som vor tids roman?

    DEFF Research Database (Denmark)

    Nielsen, Jakob Isak

    2012-01-01

    Artiklen gør rede for de forbindelseslinjer, der er mellem den nyere amerikanske tv-serie og en række andre udtryksformer (fx radiospillet og spillefilmen) for dernæst at fokusere på tv-seriens slægtskab med romanen. Alene i Danmark har såvel kulturjournalister som forskere påpeget ligheder de...... to udtryksformer imellem, og artiklen vil forsøge at skabe et overblik over berøringsfladerne og parallellerne. Artiklens tese er, at sammenligningen er gangbar i forhold til en række parametre – særligt hvis man indsnævrer de i udgangspunktet temmelig heterogene og vidtfavnende udtryksformer ”romanen” og ”tv......-serien” og fokuserer på bestemte eksempler og strømninger samt på bestemte distributions-, brugs- og oplevelsesformer (særligt DVD-udgivelsen ifm. tv-serier fx). Eksemplerne er primært fra en række nyere amerikanske tv-serier fra The Sopranos (HBO, 1999-2007) og frem, og artiklen vil afslutningsvist påpege...

  6. Fysisk träning som vård av muskuloskeletala störningar bland datorarbetande : - en litteraturöversikt

    OpenAIRE

    Renvall, Ralf

    2010-01-01

    Sammandrag: Ämnet för denna litteraturöversikt är fysisk träning som vård av muskuloskeletala funktionsstörningar bland datorarbetande. Dessa arbetsrelaterade muskuloskeletala funktionsstörningar är mycket vanliga. Arbetsförhållandena nuförtiden gör att tiden som används vid datorn förlängs och att minska belastningen med endast rätt arbetsergonomi kan orsaka andra problem. Förlängda arbetspass, låg variation i muskelns kontraktionsnivå och ökad monotoni kan bli följden av optimerad erg...

  7. Solar energy e-learning laboratory - Remote experimentation over the Internet

    Directory of Open Access Journals (Sweden)

    Polyvios C Eleftheriou

    2005-11-01

    Full Text Available This paper presents the solar energy e-learning laboratory, developed at the Higher Technical Institute (HTI within the framework of the Leonardo da Vinci project MARVEL, focuses on the system architecture and its features, and elaborates on the learning platform employed. The laboratory focuses on experiential based learning-arrangements allowing remote and distributed training with the laboratory of solar energy. As a prototype working example the HTI solar energy laboratory comprises a remotely accessible pilot solar energy conversion plant employing the state of the art in software design.

  8. Prototypes as Platforms for Participation

    DEFF Research Database (Denmark)

    Horst, Willem

    developers, and design it accordingly. Designing a flexible prototype in combination with supportive tools to be used by both interaction designers and non-designers during development is introduced as a way to open up the prototyping process to these users. Furthermore I demonstrate how such a flexible...... on prototyping, by bringing to attention that the prototype itself is an object of design, with its users and use context, which deserves further attention. Moreover, in this work I present concrete tools and methods that can be used by interaction designers in practice. As such this work addresses both......The development of interactive products in industry is an activity involving different disciplines – such as different kinds of designers, engineers, marketers and managers – in which prototypes play an important role. On the one hand, prototypes can be powerful boundary objects and an effective...

  9. Prototype Combined Heater/Thermoelectric Power Generator for Remote Applications

    Science.gov (United States)

    Champier, D.; Favarel, C.; Bédécarrats, J. P.; Kousksou, T.; Rozis, J. F.

    2013-07-01

    This study presents a prototype thermoelectric generator (TEG) developed for remote applications in villages that are not connected to the electrical power grid. For ecological and economic reasons, there is growing interest in harvesting waste heat from biomass stoves to produce some electricity. Because regular maintenance is not required, TEGs are an attractive choice for small-scale power generation in inaccessible areas. The prototype developed in our laboratory is especially designed to be implemented in stoves that are also used for domestic hot water heating. The aim of this system is to provide a few watts to householders, so they have the ability to charge cellular phones and radios, and to get some light at night. A complete prototype TEG using commercial (bismuth telluride) thermoelectric modules has been built, including system integration with an electric DC/DC converter. The DC/DC converter has a maximum power point tracker (MPPT) driven by an MC9SO8 microcontroller, which optimizes the electrical energy stored in a valve-regulated lead-acid battery. Physical models were used to study the behavior of the thermoelectric system and to optimize the performance of the MPPT. Experiments using a hot gas generator to simulate the exhaust of the combustion chamber of a stove are used to evaluate the system. Additionally, potential uses of such generators are presented.

  10. Application of rapid prototyping technology in the prototype manufacturing for evaluation of NPP components and equipments

    International Nuclear Information System (INIS)

    Park, C. Y.; Kim, J. W.; Shon, H. K.; Choi, H. S.; Yang, D. Y.

    2001-01-01

    A brief overview of rapid prototyping technology in which a part with complex shape can be produced easily and rapidly in a layer-by-layer additive manner is given in this article. In addition, a prototype model of a complex fan is manufactured using three-dimensional solid CAD modeling and Laminated Object Manufacturing (LOM), a rapid prototyping technology. This enables designers to verify and modify design rapidly at an early stage of product development; and the prototype model of a fan can be used as a pattern for various secondary casting process such as vacumm casting, lost-paper casting to make prototypes of a fan. It has been shown that the combination of three-dimensional solid CAD modeling and rapid prototyping technology can reduce greatly the cost and time of prototyping of fans and turbine blades in comparison with conventional CNC machining. It should also be noted that rapid prototyping technology enables the visualization of various physical and chemical defects at a nuclear power plant so that it can help engineers understand those defects in an effective way

  11. Med ordet som våpen. Husittane og ålmenta

    OpenAIRE

    Øystese, Martin Berland

    2015-01-01

    I denne oppgåva har eg undersøkt korleis husittane såg på ålmenta i Bøhmen tidleg på 1400-talet. Gjennom song, talar og propaganda skapa dei ei ålmente som var særs open for si tid, og skulle stå seg mot fem krosstog send frå den katolske kyrkja. Deira lære skulle endre Bøhmens historie dei neste 200 åra. The Hussite movement occurred in a volatile period. After ending the papal schism in the Catholic Church, the Conciliar Movement searched for ways to again unif...

  12. A prototype analysis of vengeance

    NARCIS (Netherlands)

    Elshout, Maartje; Nelissen, Rob; van Beest, Ilja

    2015-01-01

    The authors examined the concept of vengeance from a prototype perspective. In 6 studies, the prototype structure of vengeance was mapped. Sixty-nine features of vengeance were identified (Study 1), and rated on centrality (Study 2). Further studies confirmed the prototype structure. Compared to

  13. Laboratory Scale Prototype of a Low-Speed Electrodynamic Levitation System Based on a Halbach Magnet Array

    Science.gov (United States)

    Iniguez, J.; Raposo, V.

    2009-01-01

    In this paper we analyse the behaviour of a small-scale model of a magnetic levitation system based on the Inductrack concept. Drag and lift forces acting on our prototype, moving above a continuous copper track, are studied analytically following a simple low-speed approach. The experimental results are in good agreement with the theoretical…

  14. Review on CNC-Rapid Prototyping

    International Nuclear Information System (INIS)

    M Nafis O Z; Nafrizuan M Y; Munira M A; Kartina J

    2012-01-01

    This article reviewed developments of Computerized Numerical Control (CNC) technology in rapid prototyping process. Rapid prototyping (RP) can be classified into three major groups; subtractive, additive and virtual. CNC rapid prototyping is grouped under the subtractive category which involves material removal from the workpiece that is larger than the final part. Richard Wysk established the use of CNC machines for rapid prototyping using sets of 2½-D tool paths from various orientations about a rotary axis to machine parts without refixturing. Since then, there are few developments on this process mainly aimed to optimized the operation and increase the process capabilities to stand equal with common additive type of RP. These developments include the integration between machining and deposition process (hybrid RP), adoption of RP to the conventional machine and optimization of the CNC rapid prototyping process based on controlled parameters. The article ended by concluding that the CNC rapid prototyping research area has a vast space for improvement as in the conventional machining processes. Further developments and findings will enhance the usage of this method and minimize the limitation of current approach in building a prototype.

  15. Effect of microbial enzyme allocation strategies on stoichiometry of soil organic matter (SOM) decomposition

    Science.gov (United States)

    Wutzler, Thomas

    2014-05-01

    We explored different strategies of soil microbial community to invest resources into extracellular enzymes by conceptual modelling. Similar to the EEZY model by Moorhead et al. (2012), microbial community can invest into two separate pools of enzymes that depolymerize two different SOM pools. We show that with assuming that a fixed fraction of substrate uptake is allocated to enzymes, the microbial dynamics decouples from decomposition dynamics. We propose an alternative formulation where investment into enzymes is proportional to microbial biomass. Next, we show that the strategy of optimizing stoichiometry of decomposition flux according to microbial biomass stoichiometry yield less microbial growth than the strategy of optimizing revenue of the currently limiting element. However, both strategies result in better usage of the resources, i.e. less C overflow or N mineralization, than the strategy of equal allocation to both enzymes. Further, we discuss effects of those strategies on decomposition of SOM and priming at different time scales and discuss several abstractions from the detailed model dynamics for usage in larger scale models.

  16. Analysis of quench in the NHMFL REBCO prototype coils for the 32 T Magnet Project

    International Nuclear Information System (INIS)

    Breschi, M; Cavallucci, L; Ribani, P L; Gavrilin, A V; Weijers, H W

    2016-01-01

    A 32 T all-superconductive magnet with high field REBCO inner coils is under development at the National High Magnetic Field Laboratory, Tallahassee, Florida, USA. As part of the development activity, two prototype coils with full scale radial dimensions and final design features, but with reduced axial length were constructed. The prototype coils consist of six dry-wound double pancakes modules with uninsulated conductor and insulated stainless steel cowind. Quench studies on one of the prototype coils at 4.2 K in self-field and in a background magnetic field of 15 T were performed by activating a set of quench protection heaters. In this paper, we present a numerical analysis of the experimental results of the quench tests of one of the prototype coils. The numerical analysis was carried out through a coupled electro-thermal FEM model developed at the University of Bologna. The model is based on the coupling with distributed contact resistances of the coil pancakes described as 2D elements. A homogenization procedure of the REBCO tape and other coil materials is presented, which allows reducing the number of degrees of freedom and the computational effort. The model is applied to the analysis of the current and voltage evolutions during the experimental quench tests on the prototype coil. (paper)

  17. Spontane strategier i innovationsnetværk: materialitetens betydning for stabiliseringen af virtuelle verdner som professionelt kommunikationsmedie [Spontaneous strategies in innovation networks: The importance of materiality in stabilising virtual worlds

    Directory of Open Access Journals (Sweden)

    Emil Husted

    2012-09-01

    Full Text Available Megen forskning har beskæftiget sig med, hvordan sociale og organisatoriske processer ændres, når de finder sted i virtuelle rum. Denne artikel tager udgangspunkt i innovationsprocesser, hvor aktører forsøger at etablere virtuelle verdner som platform for professionel kommunikation, men i stedet for at fokusere på kommunikationsprocesser internt i virtuelle verdner vil artiklen stille spørgsmålstegn ved dikotomien mellem den fysiske og den virtuelle verden og undersøge materialitetens betydning for organiseringen af det virtuelle. Ved at anlægge et perspektiv inspireret af Aktør Netværks Teori vil artiklen argumentere for, at fysiske steder og objekter ikke blot fungerer som kontekst for innovationsprocesser, men tværtimod inddrages som strategiske ressourcer, der aktivt medskaber de virtuelle verdner. Empirisk funderes analysen i fem danske virksomheder og viser, hvordan virksomhederne benytter sig af fysiske steder og objekter som strategisk ressource i innovationsprocessen. Hermed bidrager artiklen til litteraturen omkring innovation inden for nye medier såsom virtuelle verdner.

  18. Prototyping in theory and in practice

    DEFF Research Database (Denmark)

    Yu, Fei; Brem, Alexander; Pasinell, Michele

    2018-01-01

    and functions of a prototype and needed to meet specific goals in order to push the process forward. Designers, on the other hand, used prototypes to investigate the design space for new possibilities, and were more open to a variety of prototyping materials and tools, especially for low-fidelity prototypes...

  19. Utilizing a Rapid Prototyping Approach in the Building of a Hypermedia-Based Reference Station.

    Science.gov (United States)

    Sell, Dan

    This paper discusses the building of a hypermedia-based reference station at the Wright Laboratory Technical Library, Wright-Patterson Air Force Base, Ohio. Following this, the paper focuses on an electronic user survey from which data is collected and analysis is made. The survey data is used in a rapid prototyping approach, which is defined as…

  20. Sandia octahedral molecular sieves (SOMS): structural and property effects of charge-balancing the M(IV)-substituted (M = Ti, Zr) Niobate framework.

    Science.gov (United States)

    Nyman, May; Tripathi, Akhilesh; Parise, John B; Maxwell, Robert S; Nenoff, Tina M

    2002-02-27

    Sandia octahedral molecular sieves (SOMS) is an isostructural, variable composition class of ion exchangers with the general formula Na(2)Nb(2-x)M(IV)(x)O (6-x)(OH)(x).H(2)O (M(IV) = Ti, Zr; x = 0.04-0.40) where up to 20% of the framework Nb(V) can be substituted with Ti(IV) or Zr(IV). This class of molecular sieves is easily converted to perovskite through low-temperature heat treatment (500-600 degrees C). This report provides a detailed account of how the charge imbalance of this Nb(V)-M(IV) substitution is compensated. X-ray powder diffraction with Rietveld refinement, infrared spectroscopy, thermogravimetric analysis, (23)Na MAS NMR, and (1)H MAS NMR were used to determine how the framework anionic charge is cation-balanced over a range of framework compositions. All spectroscopic evidence indicated a proton addition for each M(IV) substitution. Evidences for variable proton content included (1) increasing OH observed by (1)H MAS NMR with increasing M(IV) substitution, (2) increased infrared band broadening indicating increased H-bonding with increasing M(IV) substitution, (3) increased TGA weight loss (due to increased OH content) with increasing M(IV) substitution, (4) no variance in population on the sodium sites (indicated by Rietveld refinement) with variable composition, and (5) no change in the (23)Na MAS NMR spectra with variable composition. Also observed by infrared spectroscopy and (23)Na MAS NMR was increased disorder on the Nb(V)/M(IV) framework sites with increasing M(IV) substitution, evidenced by broadening of these spectral features. These spectroscopic studies, along with ion exchange experiments, also revealed the effect of the Nb(V)/M(IV) framework substitution on materials properties. Namely, the temperature of conversion to NaNb(1-x)M(IV)(x)O(3) (M = Ti, Zr) perovskite increased with increasing Ti in the framework and decreased with increasing Zr in the framework. This suggested that Ti stabilizes the SOMS framework and Zr destabilizes

  1. Arbejdsmiljøseminarer som en metode til at skabe motivation, ansvar og ejerskab til sikkerhedsarbejdet

    DEFF Research Database (Denmark)

    Pedersen, Louise

    2011-01-01

    arbejdsmiljøseminarer som en ny metode til på en meningsfuld måde systematisk at involvere mellemlederne og de ansatte i virksomhedernes sikkerhedsarbejde og dermed potentielt at fremme deres motivation, ansvar og ejerskab til dette. Arbejdsmiljøseminarer tager udgangspunkt i de ansattes faglige ekspertise og...

  2. Mobile prototyping with Axure 7

    CERN Document Server

    Hacker, Will

    2013-01-01

    This book is a step-by-step tutorial which includes hands-on examples and downloadable Axure files to get you started with mobile prototyping immediately. You will learn how to develop an application from scratch, and will be guided through each and every step.If you are a mobile-centric developer/designer, or someone who would like to take their Axure prototyping skills to the next level and start designing and testing mobile prototypes, this book is ideal for you. You should be familiar with prototyping and Axure specifically, before you read this book.

  3. Rapid Prototyping Technologies and their Applications in Prosthodontics, a Review of Literature.

    Science.gov (United States)

    Torabi, Kianoosh; Farjood, Ehsan; Hamedani, Shahram

    2015-03-01

    The early computer-aided design/computer-aided manufacturing (CAD/CAM) systems were relied exclusively on subtractive methods. In recent years, additive methods by employing rapid prototyping (RP) have progressed rapidly in various fields of dentistry as they have the potential to overcome known drawbacks of subtractive techniques such as fit problems. RP techniques have been exploited to build complex 3D models in medicine since the 1990s. RP has recently proposed successful applications in various dental fields, such as fabrication of implant surgical guides, frameworks for fixed and removable partial dentures, wax patterns for the dental prosthesis, zirconia prosthesis and molds for metal castings, and maxillofacial prosthesis and finally, complete dentures. This paper aimed to offer a comprehensive literature review of various RP methods, particularly in dentistry, that are expected to bring many improvements to the field. A search was made through MEDLINE database and Google scholar search engine. The keywords; 'rapid prototyping' and 'dentistry' were searched in title/abstract of publications; limited to 2003 to 2013, concerning past decade. The inclusion criterion was the technical researches that predominately included laboratory procedures. The exclusion criterion was meticulous clinical and excessive technical procedures. A total of 106 articles were retrieved, recited by authors and only 50 met the specified inclusion criteria for this review. Selected articles had used rapid prototyping techniques in various fields in dentistry through different techniques. This review depicted the different laboratory procedures employed in this method and confirmed that RP technique have been substantially feasible in dentistry. With advancement in various RP systems, it is possible to benefit from this technique in different dental practices, particularly in implementing dental prostheses for different applications.

  4. Prototype-Incorporated Emotional Neural Network.

    Science.gov (United States)

    Oyedotun, Oyebade K; Khashman, Adnan

    2017-08-15

    Artificial neural networks (ANNs) aim to simulate the biological neural activities. Interestingly, many ''engineering'' prospects in ANN have relied on motivations from cognition and psychology studies. So far, two important learning theories that have been subject of active research are the prototype and adaptive learning theories. The learning rules employed for ANNs can be related to adaptive learning theory, where several examples of the different classes in a task are supplied to the network for adjusting internal parameters. Conversely, the prototype-learning theory uses prototypes (representative examples); usually, one prototype per class of the different classes contained in the task. These prototypes are supplied for systematic matching with new examples so that class association can be achieved. In this paper, we propose and implement a novel neural network algorithm based on modifying the emotional neural network (EmNN) model to unify the prototype- and adaptive-learning theories. We refer to our new model as ``prototype-incorporated EmNN''. Furthermore, we apply the proposed model to two real-life challenging tasks, namely, static hand-gesture recognition and face recognition, and compare the result to those obtained using the popular back-propagation neural network (BPNN), emotional BPNN (EmNN), deep networks, an exemplar classification model, and k-nearest neighbor.

  5. Prototype Effect and the Persuasiveness of Generalizations.

    Science.gov (United States)

    Dahlman, Christian; Sarwar, Farhan; Bååth, Rasmus; Wahlberg, Lena; Sikström, Sverker

    An argument that makes use of a generalization activates the prototype for the category used in the generalization. We conducted two experiments that investigated how the activation of the prototype affects the persuasiveness of the argument. The results of the experiments suggest that the features of the prototype overshadow and partly overwrite the actual facts of the case. The case is, to some extent, judged as if it had the features of the prototype instead of the features it actually has. This prototype effect increases the persuasiveness of the argument in situations where the audience finds the judgment more warranted for the prototype than for the actual case (positive prototype effect), but decreases persuasiveness in situations where the audience finds the judgment less warranted for the prototype than for the actual case (negative prototype effect).

  6. Z-2 Prototype Space Suit Development

    Science.gov (United States)

    Ross, Amy; Rhodes, Richard; Graziosi, David; Jones, Bobby; Lee, Ryan; Haque, Bazle Z.; Gillespie, John W., Jr.

    2014-01-01

    NASA's Z-2 prototype space suit is the highest fidelity pressure garment from both hardware and systems design perspectives since the Space Shuttle Extravehicular Mobility Unit (EMU) was developed in the late 1970's. Upon completion the Z-2 will be tested in the 11 foot human-rated vacuum chamber and the Neutral Buoyancy Laboratory (NBL) at the NASA Johnson Space Center to assess the design and to determine applicability of the configuration to micro-, low- (asteroid), and planetary- (surface) gravity missions. This paper discusses the 'firsts' that the Z-2 represents. For example, the Z-2 sizes to the smallest suit scye bearing plane distance for at least the last 25 years and is being designed with the most intensive use of human models with the suit model.

  7. First Results on the Prototype of the Laser-Megajoule Cryotarget Positioner

    International Nuclear Information System (INIS)

    Paquignon, G.; Brisset, D.; Cathala, B.; Lamaison, V.; Chatain, D.; Bonnay, P.; Bouleau, E.; Perin, J.P.

    2004-01-01

    The Laser Megajoule cryotarget positioner will be used to set the cryogenic targets at the center of the experimental vacuum chamber. It will consist of a 6-meter carbon boom at the end of which a target will be held by a cryogenic grip at 20 K. In the French concept, the targets will be transferred at 20 K to the cryotarget positioner using another cryostat. Some of the specifications are very ambitious. Indeed, the targets must be positioned with a high accuracy (+/-5 μm), the temperature must be controlled with a very good stability and the cryostat must have a 5 day autonomy. To reach these requirements, some technical solutions have been considered. To validate these choices, a scale one prototype has been studied and built at the Low Temperature Laboratory (SBT) of CEA/Grenoble (France). We present here the first results obtained with this prototype

  8. Project management strategies for prototyping breakdowns

    DEFF Research Database (Denmark)

    Granlien, Maren Sander; Pries-Heje, Jan; Baskerville, Richard

    2009-01-01

    , managing the explorative and iterative aspects of prototyping projects is not a trivial task. We examine the managerial challenges in a small scale prototyping project in the Danish healthcare sector where a prototype breakdown and project escalation occurs. From this study we derive a framework...... of strategies for coping with escalation in troubled prototyping projects; the framework is based on project management triangle theory and is useful when considering how to manage prototype breakdown and escalation. All strategies were applied in the project case at different points in time. The strategies led...

  9. Specifications in software prototyping

    OpenAIRE

    Luqi; Chang, Carl K.; Zhu, Hong

    1998-01-01

    We explore the use of software speci®cations for software prototyping. This paper describes a process model for software prototyping, and shows how specifications can be used to support such a process via a cellular mobile phone switch example.

  10. Prototyping and testing of the Continuous External Rogowski ITER magnetic sensor

    Energy Technology Data Exchange (ETDEWEB)

    Moreau, Ph., E-mail: philippe.jacques.moreau@cea.fr [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Le-Luyer, A.; Malard, P.; Pastor, P.; Saint-Laurent, F.; Spuig, P. [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Lister, J.; Toussaint, M.; Marmillod, P.; Testa, D. [Centre de Recherches en Physique des Plasmas, EPFL (Switzerland); Peruzzo, S. [Consorzio RFX, Association EURATOM-ENEA, C.so Stati Uniti 4, 35127 Padova (Italy); Knaster, J. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); IFMIF EVEDA, Rokkasho (Japan); Vayakis, G.; Hughes, S.; Patel, K.M. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France)

    2013-10-15

    Highlights: ► ITER Continuous External Rogowski (CER) are designed for plasma and vacuum vessel current measurement. ► CER are located in the casing of Toroidal Field Coils and thus will operate at 4 K. ► The design of the sensors has been completed. ► CER prototypes have been manufactured by 2 suppliers. ► The R and D campaign on CER prototypes consisted in the measurement of about 100 parameters to characterize the CER. -- Abstract: The measurement of the plasma current in ITER plays an outstanding role as it is part of the machine protection and is a safety-relevant measurement: it will be used in relation with regulatory limits to show that the operation remains within the safe envelope defined in the ITER license. The Continuous External Rogowski (CER) is an inductive sensor designed for current measurements and located in the casing of 3 Toroidal Field Coils (TFCs). After the completion of the design of the CER, 4 prototypes of the sensor were manufactured and R and D activities were performed under a Grant with the European Domestic Agency (F4E-GRT-012). The work was carried out between 2010 and 2011 by the ITERMAG consortium comprising 3 laboratories: CRPP (Switzerland) as leader, CEA (France) and RFX (Italy). The R and D campaign on CER prototypes consisted in the measurement of about 100 parameters to characterize the CER in terms of electrical, thermal, mechanical and also of vacuum compatibility. From these results, electromagnetic modeling of the CER response was performed. It is demonstrated that the CER fulfills ITER requirements. However, the vacuum compatibility of the prototype has to be improved and solutions to cope with this issue are proposed.

  11. Prototyping and testing of the Continuous External Rogowski ITER magnetic sensor

    International Nuclear Information System (INIS)

    Moreau, Ph.; Le-Luyer, A.; Malard, P.; Pastor, P.; Saint-Laurent, F.; Spuig, P.; Lister, J.; Toussaint, M.; Marmillod, P.; Testa, D.; Peruzzo, S.; Knaster, J.; Vayakis, G.; Hughes, S.; Patel, K.M.

    2013-01-01

    Highlights: ► ITER Continuous External Rogowski (CER) are designed for plasma and vacuum vessel current measurement. ► CER are located in the casing of Toroidal Field Coils and thus will operate at 4 K. ► The design of the sensors has been completed. ► CER prototypes have been manufactured by 2 suppliers. ► The R and D campaign on CER prototypes consisted in the measurement of about 100 parameters to characterize the CER. -- Abstract: The measurement of the plasma current in ITER plays an outstanding role as it is part of the machine protection and is a safety-relevant measurement: it will be used in relation with regulatory limits to show that the operation remains within the safe envelope defined in the ITER license. The Continuous External Rogowski (CER) is an inductive sensor designed for current measurements and located in the casing of 3 Toroidal Field Coils (TFCs). After the completion of the design of the CER, 4 prototypes of the sensor were manufactured and R and D activities were performed under a Grant with the European Domestic Agency (F4E-GRT-012). The work was carried out between 2010 and 2011 by the ITERMAG consortium comprising 3 laboratories: CRPP (Switzerland) as leader, CEA (France) and RFX (Italy). The R and D campaign on CER prototypes consisted in the measurement of about 100 parameters to characterize the CER in terms of electrical, thermal, mechanical and also of vacuum compatibility. From these results, electromagnetic modeling of the CER response was performed. It is demonstrated that the CER fulfills ITER requirements. However, the vacuum compatibility of the prototype has to be improved and solutions to cope with this issue are proposed

  12. Effects of fermentation time and low temperature during the production process of Thai pickled fish (pla-som) on the viability and infectivity of Opisthorchis viverrini metacercariae.

    Science.gov (United States)

    Onsurathum, Sudarat; Pinlaor, Porntip; Haonon, Ornuma; Chaidee, Apisit; Charoensuk, Lakhanawan; Intuyod, Kitti; Boonmars, Thidarut; Laummaunwai, Porntip; Pinlaor, Somchai

    2016-02-02

    Contamination of a popular fermented fish dish, pla-som, by Opisthorchis viverrini metacercariae (OVMC) is a possible cause of carcinogenic liver fluke infection in Thailand. Affected individuals are at risk of bile duct cancer, which is a major health problem for people in the Greater Mekong Subregion. In order to investigate concerns about food safety, we studied the effects of fermentation time and low temperature on the viability and infectivity of OVMC during the pla-som production process. Pla-som was prepared at room temperature for up to 1 week in duplicate experiments using cyprinid freshwater fish obtained from an O. viverrini-endemic area. OVMC were then isolated and identified under a stereomicroscope. Complete and viable OVMC were found on days 1-4 of fermentation, while their morphology was degenerated thereafter. After OVMC were fed to hamsters, the percentage of the worm recovery after 1 to 2 months of infection was 52%, 44.7%, 11.3% and 1% for days 1, 2, 3 and 4, respectively. In order to measure the effect of low temperature on OVMC, fish were kept in a refrigerator (4 °C) for up to five days and then subsequently fermented for three days. In fish stored in a refrigerator for 1 and 2 days, viable OVMC were clearly observed and were able to infect hamsters, a worm-recovery percentage of 3.3% and 12.7%, respectively. By contrast, in pla-som prepared from fish stored for 3 to 5 days, OVMC were degenerated and could not infect the host. In conclusion, pla-som fermentation for more than four days and refrigerating fish for three days before pla-som processing can prevent O. viverrini infection. This study may increase awareness of fermented-fish dish preparation to prevent liver fluke infection. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Som, fúria, crítica e audiência: aspectos da recepção da série Som & fúria, de Fernando Meirelles

    Directory of Open Access Journals (Sweden)

    Marcelo de Lima

    2016-07-01

    Full Text Available Este artigo procura analisar aspectos da recepção da minissérie Som & fúria, exibida pela Rede Globo de Televisão em 2009. Produzida em conjunto com a O2 Filmes, a minissérie narra a história de uma trupe teatral que adapta obras do dramaturgo inglês William Shakespeare. Ao mesmo tempo em que recebeu críticas extremamente positivas da crítica jornalística, Som & fúria alcançou baixos números de audiência para os padrões da Globo, o que levou a seu cancelamento após apenas uma temporada. Consideramos que as referências à literatura shakespeariana e a presença da linguagem teatral na minissérie podem ter provocado um ruído de comunicação com o público, minimizando, assim, as possibilidades de diálogo e de construção de uma relação afetiva entre o programa e uma audiência mais abrangente. Utilizamos principalmente os conceitos de dialogismo e carnavalização (BAKHTIN, 2010; STAM, 1992 e a abordagem cognitivista aplicada a produtos audiovisuais (BORDWELL, 2007; PUCCI, 2012 na tentativa de compreender essa discrepância entre a recepção do público e da crítica. Procuramos contribuir, assim, para os estudos de recepção de audiovisuais, considerando os diversos atores que compõem o público e seus locus recepcionais, suas particularidades e as influências que determinam a forma através qual eles se relacionam com produtos culturais diversos.

  14. Validation of a FAST Model of the SWAY Prototype Floating Wind Turbine

    Energy Technology Data Exchange (ETDEWEB)

    Koh, J. H. [Nanyang Technological Univ. (Singapore); Ng, E. Y. K. [Nanyang Technological Univ. (Singapore); Robertson, Amy [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jonkman, Jason [National Renewable Energy Lab. (NREL), Golden, CO (United States); Driscoll, Frederick [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-06-01

    As part of a collaboration of the National Renewable Energy Laboratory (NREL) and SWAY AS, NREL installed scientific wind, wave, and motion measurement equipment on the spar-type 1/6.5th-scale prototype SWAY floating offshore wind system. The equipment enhanced SWAY's data collection and allowed SWAY to verify the concept and NREL to validate a FAST model of the SWAY design in an open-water condition. Nanyang Technological University (NTU), in collaboration with NREL, assisted with the validation. This final report gives an overview of the SWAY prototype and NREL and NTU's efforts to validate a model of the system. The report provides a summary of the different software tools used in the study, the modeling strategies, and the development of a FAST model of the SWAY prototype wind turbine, including justification of the modeling assumptions. Because of uncertainty in system parameters and modeling assumptions due to the complexity of the design, several system properties were tuned to better represent the system and improve the accuracy of the simulations. Calibration was performed using data from a static equilibrium test and free-decay tests.

  15. Advanced laboratory for testing plasma thrusters and Hall thruster measurement campaign

    Directory of Open Access Journals (Sweden)

    Szelecka Agnieszka

    2016-06-01

    Full Text Available Plasma engines are used for space propulsion as an alternative to chemical thrusters. Due to the high exhaust velocity of the propellant, they are more efficient for long-distance interplanetary space missions than their conventional counterparts. An advanced laboratory of plasma space propulsion (PlaNS at the Institute of Plasma Physics and Laser Microfusion (IPPLM specializes in designing and testing various electric propulsion devices. Inside of a special vacuum chamber with three performance pumps, an environment similar to the one that prevails in space is created. An innovative Micro Pulsed Plasma Thruster (LμPPT with liquid propellant was built at the laboratory. Now it is used to test the second prototype of Hall effect thruster (HET operating on krypton propellant. Meantime, an improved prototype of krypton Hall thruster is constructed.

  16. Implicit face prototype learning from geometric information.

    Science.gov (United States)

    Or, Charles C-F; Wilson, Hugh R

    2013-04-19

    There is evidence that humans implicitly learn an average or prototype of previously studied faces, as the unseen face prototype is falsely recognized as having been learned (Solso & McCarthy, 1981). Here we investigated the extent and nature of face prototype formation where observers' memory was tested after they studied synthetic faces defined purely in geometric terms in a multidimensional face space. We found a strong prototype effect: The basic results showed that the unseen prototype averaged from the studied faces was falsely identified as learned at a rate of 86.3%, whereas individual studied faces were identified correctly 66.3% of the time and the distractors were incorrectly identified as having been learned only 32.4% of the time. This prototype learning lasted at least 1 week. Face prototype learning occurred even when the studied faces were further from the unseen prototype than the median variation in the population. Prototype memory formation was evident in addition to memory formation of studied face exemplars as demonstrated in our models. Additional studies showed that the prototype effect can be generalized across viewpoints, and head shape and internal features separately contribute to prototype formation. Thus, implicit face prototype extraction in a multidimensional space is a very general aspect of geometric face learning. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. Novice designers’ use of prototypes in engineering design

    Science.gov (United States)

    Deininger, Michael; Daly, Shanna R.; Sienko, Kathleen H.; Lee, Jennifer C.

    2017-01-01

    Prototypes are essential tools in product design processes, but are often underutilized by novice designers. To help novice designers use prototypes more effectively, we must first determine how they currently use prototypes. In this paper, we describe how novice designers conceptualized prototypes and reported using them throughout a design project, and compare reported prototyping use to prototyping best practices. We found that some of the reported prototyping practices by novice designers, such as using inexpensive prototypes early and using prototypes to define user requirements, occurred infrequently and lacked intentionality. Participants’ initial descriptions of prototypes were less sophisticated than how they later described using them and only upon prompted reflection did participants recognize more specific benefits of using prototypes. PMID:29398740

  18. Manufacturing of neutral beam sources at Lawrence Livermore Laboratory

    International Nuclear Information System (INIS)

    Baird, E.D.; Duffy, T.J.; Harter, G.A.; Holland, E.D.; Kloos, W.A.; Pastrone, J.A.

    1979-01-01

    Over 50 neutral beam sources (NBS) of the joint Lawrence Berkeley Laboratory (LBL)/Lawrence Livermore Laboratory (LLL) design have been manufactured, since 1973, in the LLL Neutral Beam Source Facility. These sources have been used to provide start-up and sustaining neutral beams for LLL mirror fusion experiments, including 2XIIB, TMX, and Beta II. Experimental prototype 20-kV and 80-kV NBS have also been designed, built, and tested for the Mirror Fusion Test Facility (MFTF)

  19. A prototype for a mammographic head and related developments

    Energy Technology Data Exchange (ETDEWEB)

    Amendolia, S.R.; Annovazzi, A.; Bigongiari, A.; Bisogni, M.G.; Catarsi, F.; Cesqui, F.; Cetronio, A.; Chianella, M.; Delogu, P.; Fantacci, M.E.; Galimberti, D.; Lanzieri, C.; Lavanga, S.; Novelli, M.; Passuello, G.; Stefanini, A.; Testa, A.; Venturelli, L

    2004-02-01

    The Integrated Mammographic Imaging (IMI) project aims to realize innovative instrumentations for morphological and functional mammography, in particular, one of the research topics is the design and development of a prototype of a mammographic head. Innovative industrial processes for the production of GaAs pixel detectors and for their bump-bonding to the read-out VLSI electronics have been developed by AMS. The data acquisition and processing have been developed by LABEN; the power supply and distribution system has been realized by CAEN; while the integration of the head in a standard mammograph has been carried on by the Laboratori di Ricerca Gilardoni.

  20. A prototype for a mammographic head and related developments

    International Nuclear Information System (INIS)

    Amendolia, S.R.; Annovazzi, A.; Bigongiari, A.; Bisogni, M.G.; Catarsi, F.; Cesqui, F.; Cetronio, A.; Chianella, M.; Delogu, P.; Fantacci, M.E.; Galimberti, D.; Lanzieri, C.; Lavanga, S.; Novelli, M.; Passuello, G.; Stefanini, A.; Testa, A.; Venturelli, L.

    2004-01-01

    The Integrated Mammographic Imaging (IMI) project aims to realize innovative instrumentations for morphological and functional mammography, in particular, one of the research topics is the design and development of a prototype of a mammographic head. Innovative industrial processes for the production of GaAs pixel detectors and for their bump-bonding to the read-out VLSI electronics have been developed by AMS. The data acquisition and processing have been developed by LABEN; the power supply and distribution system has been realized by CAEN; while the integration of the head in a standard mammograph has been carried on by the Laboratori di Ricerca Gilardoni

  1. Prototyping of user interfaces for mobile applications

    CERN Document Server

    Bähr, Benjamin

    2017-01-01

    This book investigates processes for the prototyping of user interfaces for mobile apps, and describes the development of new concepts and tools that can improve the prototype driven app development in the early stages. It presents the development and evaluation of a new requirements catalogue for prototyping mobile app tools that identifies the most important criteria such tools should meet at different prototype-development stages. This catalogue is not just a good point of orientation for designing new prototyping approaches, but also provides a set of metrics for a comparing the performance of alternative prototyping tools. In addition, the book discusses the development of Blended Prototyping, a new approach for prototyping user interfaces for mobile applications in the early and middle development stages, and presents the results of an evaluation of its performance, showing that it provides a tool for teamwork-oriented, creative prototyping of mobile apps in the early design stages.

  2. Mechanical properties used for the qualification of transport casks: Prototype development and extension to serial production

    International Nuclear Information System (INIS)

    Salzbrenner, R.; Crenshaw, T.B.; Sorenson, K.B.

    1992-01-01

    A thorough understanding of the mechanical behavior of material in a specific cask is required to properly analyze the structural response of the cask. An appropriate way to establish this understanding is through laboratory testing of cask material. The laboratory testing that was done to support the MOSAIK Drop Test Program is summarized as an example of how mechanical properties can be mapped for a prototype cask. The broad range of measured properties allows the critical aspects of mechanical behavior to be understood. This is necessary for the proper application of fracture mechanics, and focuses on fracture toughness as the inherent materials property which quantifies the fracture resistance of a material. The general fracture mechanics approach and its application to specific cask designs are described elsewhere (Salzbrenner et al. 1990, Sorenson et al. 1992a, Sorenson et al. 1992b). The understanding established by a thorough mapping of the mechanical properties is necessary to apply fracture mechanics to a particular prototype, but it is not sufficient for qualifying serially produced casks. The mechanical behavior of a prototype must be correctly associated with parameters which can be measured on production casks. Since the production casks cannot be destructively tested, measurements are commonly made on sub-size specimens. This may prevent direct measurement of valid design properties. An additional database may then be required to establish the correlation between sub-size specimen measurements and valid design properties. This is illustrated by outlining the additional testing which would be necessary to allow the successful verification of the MOSAIK Drop Test Program to be extended from the prototype to serially produced casks

  3. Method comparison and validation of a prototype device for measurement of ionized calcium concentrations cow-side against a point-of-care instrument and a benchtop blood-gas analyzer reference method.

    Science.gov (United States)

    Neves, R C; Stokol, T; Bach, K D; McArt, J A A

    2018-02-01

    The objective of this study was to assess an optimized ion-selective electrode Ca-module prototype as a potential cow-side device for ionized Ca (iCa) measurements in bovine blood. A linearity experiment showed no deviation from linearity over a range of iCa concentrations compared with a commercial point-of-care (POC) device commonly used in the field (POC VS ; VetScan i-STAT, Abaxis North America, Union City, CA) and a laboratory gold standard benchtop blood-gas analyzer [reference analyzer (RA); ABL-800 FLEX, Radiometer Medical, Copenhagen, Denmark]. Coefficient of variation on 3 samples with high, within-range, and low iCa concentrations ranged from 1.0 to 3.9% for the prototype. A follow-up validation experiment was performed, in which our objectives were to (1) assess the performance of the prototype cow-side against the POC VS (farm gold-standard) using fresh non-anticoagulated whole-blood samples; (2) assess the performance of the prototype and the POC VS against the RA in a diagnostic laboratory using blood collected in a heparin-balanced syringe; and (3) assess the agreement of the prototype and POC VS on-farm (fresh non-anticoagulated whole blood) against the RA on heparin-balanced blood. Finally, sensitivity and specificity of the results obtained by the prototype and the POC VS cow-side compared with the results obtained by the laboratory RA using 3 different iCa cut points for classification of subclinical hypocalcemia were calculated. A total of 101 periparturient Holstein cows from 3 dairy farms in New York State were used for the second experiment. Ionized Ca results from the prototype cow-side were, on average, 0.06 mmol/L higher than the POC VS . With heparin-balanced samples under laboratory conditions, the prototype and POC VS measured an average 0.04 mmol/L higher and lower, respectively, compared with the RA. Results from the prototype and POC VS cow-side were 0.01 mmol/L higher and 0.05 mmol/L lower, respectively, compared with results from

  4. Designtænkning som didaktisk metode: Læringsdesign for teknologisk forestillingskraft og handlekraft

    Directory of Open Access Journals (Sweden)

    Rikke Berggreen Paaskesen

    2016-11-01

    Full Text Available Det er et problem, at undervisere, lærerstuderende og elever ikke bliver mødt med tilstrækkelig inspiration, metoder og design til, hvorledes de kan anvende teknologier i undervisningen på måder der understøtter teknologisk forestillingskraft, handlekraft og kritisk-kreativ teknologisk dannelse. Dette forsøger denne artikel at adressere gennem at tilbyde forståelsesramme, struktur, procesmodel og konkret case-eksempel for hvorledes man kan arbejde med designtænkning som didaktisk metode til udformning læringsdesign for kritisk-kreativ teknologisk forestillingskraft og handlekraft. Artiklen kobler designtænkning og læringsdesign sammen til designtænkende læringsdesign for undervisere og læringsdesign for designtænkning for studerende og elever. Disse formater beskrives dernæst som åbne didaktisk-pædagogiske læringsdesign og centrale strukturer, elementer og faser fremstilles og beskrives. Pædagogisk tænkning for kritisk-kreativt medborgerskab inddrages til at underbygge modellens didaktisk-pædagogiske potentiale. Designtænkende læringsdesign for demokratisk dannelse præsenteres dernæst gennem en konkret case Future-Tech-Town Year 2060. I konklusionen udvides perspektivet til uddannelsesarbejde med læringsdesign der sigter mod kritisk-kreative fremtids-skabere med teknologier.

  5. Mobile robot prototype detector of gamma radiation

    International Nuclear Information System (INIS)

    Vazquez C, R.M.; Duran V, M. D.; Jardon M, C. I.

    2014-10-01

    In this paper the technological development of a mobile robot prototype detector of gamma radiation is shown. This prototype has been developed for the purpose of algorithms implementation for the applications of terrestrial radiation monitoring of exposed sources, search for missing radioactive sources, identification and delineation of radioactive contamination areas and distribution maps generating of radioactive exposure. Mobile robot detector of radiation is an experimental technology development platform to operate in laboratory environment or flat floor facilities. The prototype integrates a driving section of differential configuration robot on wheels, a support mechanism and rotation of shielded detector, actuator controller cards, acquisition and processing of sensor data, detection algorithms programming and control actuators, data recording (Data Logger) and data transmission in wireless way. The robot in this first phase is remotely operated in wireless way with a range of approximately 150 m line of sight and can extend that range to 300 m or more with the use of signal repeaters. The gamma radiation detection is performed using a Geiger detector shielded. Scan detection is performed at various time sampling periods and diverse positions of discrete or continuous angular orientation on the horizon. The captured data are geographical coordinates of robot GPS (latitude and longitude), orientation angle of shield, counting by sampling time, date, hours, minutes and seconds. The data is saved in a file in the Micro Sd memory on the robot. They are also sent in wireless way by an X Bee card to a remote station that receives for their online monitoring on a laptop through an acquisition program by serial port on Mat Lab. Additionally a voice synthesizing card with a horn, both in the robot, periodically pronounced in Spanish, data length, latitude, orientation angle of shield and detected accounts. (Author)

  6. EUCLID ARCHIVE SYSTEM PROTOTYPE

    NARCIS (Netherlands)

    Belikov, Andrey; Williams, Owen; Droge, Bob; Tsyganov, Andrey; Boxhoorn, Danny; McFarland, John; Verdoes Kleijn, Gijs; Valentijn, E; Altieri, Bruno; Dabin, Christophe; Pasian, F.; Osuna, Pedro; Soille, P.; Marchetti, P.G.

    2014-01-01

    The Euclid Archive System prototype is a functional information system which is used to address the numerous challenges in the development of fully functional data processing system for Euclid. The prototype must support the highly distributed nature of the Euclid Science Ground System, with Science

  7. Simple photolithographic rapid prototyping of microfluidic chips

    DEFF Research Database (Denmark)

    Kunstmann-Olsen, Casper; Hoyland, James; Rubahn, Horst-Günter

    2012-01-01

    Vi præsenterer en simpel metode til at producere støbeforme til støbning af PDMS mikrofluide chips vha. fotolitografi, med 35mm fotonegativer som masker. Vi demonstrer metodens muligheder og begrænsninger. Vi har optimeret processen til at fremstille planare lab-on-a-chip strukturer med meget høj...

  8. Design and fabrication of the prototype superconducting quadrupole for the CERN LHC project

    International Nuclear Information System (INIS)

    Baze, J.M.; Cacaut, D.; Jacquemin, J.P.; Lyraud, C.; Michez, C.; Pabot, Y.; Perot, J.; Rifflet, J.M.; Toussaint, J.C.; Vedrine, P.

    1992-01-01

    Within the framework of the LHC R and D program, CERN and CEA/Saclay have established a collaboration to carry out, amongst others, the design, building and testing of a superconducting LHC prototype quadrupole at the Saclay laboratory. The cold mass of this quadrupole is presently under construction at Saclay. The quadrupole design features a twin aperture configuration, a gradient design features a twin aperture configuration, a gradient of 250T/m, a length of 3m and a free coil aperture of 56mm. European industries participate in this project by delivering components and fabrication the tooling according to specifications prepared by Saclay. This paper gives details of the magnet design and construction. Coil winding will start in summer 1991 and the first prototype should be assembled and ready for testing by mid 1992

  9. EBR-2 [Experimental Breeder Reactor-2], IFR [Integral Fast Reactor] prototype testing programs

    International Nuclear Information System (INIS)

    Lehto, W.K.; Sackett, J.I.; Lindsay, R.W.; Planchon, H.P.; Lambert, J.D.B.

    1990-01-01

    The Experimental Breeder Reactor-2 (EBR-2) is a sodium cooled power reactor supplying about 20 MWe to the Idaho National Engineering Laboratory (INEL) grid and, in addition, is the key component in the development of the Integral Fast Reactor (IFR). EBR-2's testing capability is extensive and has seen four major phases: (1) demonstration of LMFBR power plant feasibility, (2) irradiation testing for fuel and material development. (3) testing the off-normal performance of fuel and plant systems and (4) operation as the IFR prototype, developing and demonstrating the IFR technology associated with fuel and plant design. Specific programs being carried out in support of the IFR include advanced fuels and materials development and component testing. This paper discusses EBR-2 as the IFR prototype and the associated testing programs. 29 refs

  10. PRMS Data Warehousing Prototype

    Science.gov (United States)

    Guruvadoo, Eranna K.

    2002-01-01

    Project and Resource Management System (PRMS) is a web-based, mid-level management tool developed at KSC to provide a unified enterprise framework for Project and Mission management. The addition of a data warehouse as a strategic component to the PRMS is investigated through the analysis, design and implementation processes of a data warehouse prototype. As a proof of concept, a demonstration of the prototype with its OLAP's technology for multidimensional data analysis is made. The results of the data analysis and the design constraints are discussed. The prototype can be used to motivate interest and support for an operational data warehouse.

  11. A prototype of on-line digital flow rate meter based on cross-correlation principle

    International Nuclear Information System (INIS)

    Sun Xiaodong; Dai Zhenxi; Xu Jijun

    1997-01-01

    An on-line, digital prototype of flow rate measurement system based on cross-correlation principle is developed. Laboratory measurements using the prototype show that sufficiently large temperature fluctuations exist naturally and that measurements are possible. Temperature fluctuations are detected by two identical thermocouples spaced along the flow direction and are pre-processed by a thermocouple signal amplifier. The pre-processed temperature fluctuations are analyzed by a cross-correlator which measures the transit time of temperature fluctuations between two thermocouples directly. Thus, the so-called correlation velocity can be determined by a chip microprocessor 8031. Experimental results with single-phase under steady conditions also show that the distance between two thermocouples and the Reynolds number of fluid are the most important parameters to the measurement

  12. Designing and testing prototypes

    NARCIS (Netherlands)

    Vereijken, P.; Wijnands, F.; Stol, W.

    1995-01-01

    This second progress report focuses on designing a theoretical prototype by linking parameters to methods and designing the methods in this context until they are ready for initial testing. The report focuses also on testing and improving the prototype in general and the methods in particular until

  13. Building a Laboratory-Scale Biogas Plant and Verifying its Functionality

    Science.gov (United States)

    Boleman, Tomáš; Fiala, Jozef; Blinová, Lenka; Gerulová, Kristína

    2011-01-01

    The paper deals with the process of building a laboratory-scale biogas plant and verifying its functionality. The laboratory-scale prototype was constructed in the Department of Safety and Environmental Engineering at the Faculty of Materials Science and Technology in Trnava, of the Slovak University of Technology. The Department has already built a solar laboratory to promote and utilise solar energy, and designed SETUR hydro engine. The laboratory is the next step in the Department's activities in the field of renewable energy sources and biomass. The Department is also involved in the European Union project, where the goal is to upgrade all existed renewable energy sources used in the Department.

  14. Interior Architectural Requirements for Electronic Circuits and its Applications Research Laboratory

    International Nuclear Information System (INIS)

    ElDib, A.A.

    2014-01-01

    This paper discusses the pivotal role of the Interior Architecture As one of the scientific disciplines minute to complete the Architectural Sciences, which relied upon the achievement and development of facilities containing scientific research laboratories, in terms of planning and design, particularly those containing biological laboratories using radioactive materials, adding to that, the application of the materials or raw materials commensurate with each discipline of laboratory and its work nature, and by the discussion the processing of design techniques and requirements of interior architecture dealing with Research Laboratory for electronic circuits and their applications with the making of its prototypes

  15. Prototypes in engineering design: Definitions and strategies

    DEFF Research Database (Denmark)

    Jensen, Lasse Skovgaard; Özkil, Ali Gürcan; Mortensen, Niels Henrik

    2016-01-01

    By reviewing literature, we investigate types, purposes and definitions of prototypes. There is no overarching definition of a prototype, but we identify five categories of prototypes in litterature. We further synthesize and reference previous work to create an overview of aspects in prototyping...

  16. DEVELOPMENT OF A LOW COST INFERENTIAL NATURAL GAS ENERGY FLOW RATE PROTOTYPE RETROFIT MODULE

    Energy Technology Data Exchange (ETDEWEB)

    E. Kelner; D. George; T. Morrow; T. Owen; M. Nored; R. Burkey; A. Minachi

    2005-05-01

    In 1998, Southwest Research Institute began a multi-year project to develop a working prototype instrument module for natural gas energy measurement. The module will be used to retrofit a natural gas custody transfer flow meter for energy measurement, at a cost an order of magnitude lower than a gas chromatograph. Development and evaluation of the prototype energy meter in 2002-2003 included: (1) refinement of the algorithm used to infer properties of the natural gas stream, such as heating value; (2) evaluation of potential sensing technologies for nitrogen content, improvements in carbon dioxide measurements, and improvements in ultrasonic measurement technology and signal processing for improved speed of sound measurements; (3) design, fabrication and testing of a new prototype energy meter module incorporating these algorithm and sensor refinements; and (4) laboratory and field performance tests of the original and modified energy meter modules. Field tests of the original energy meter module have provided results in close agreement with an onsite gas chromatograph. The original algorithm has also been tested at a field site as a stand-alone application using measurements from in situ instruments, and has demonstrated its usefulness as a diagnostic tool. The algorithm has been revised to use measurement technologies existing in the module to measure the gas stream at multiple states and infer nitrogen content. The instrumentation module has also been modified to incorporate recent improvements in CO{sub 2} and sound speed sensing technology. Laboratory testing of the upgraded module has identified additional testing needed to attain the target accuracy in sound speed measurements and heating value.

  17. En bok for meg? Litteraturvalg med knyttneveprøven som metode.

    OpenAIRE

    Nyhus, Mari

    2016-01-01

    Sammendrag Denne masteroppgaven har følgende problemstilling: Kan elever gjennom en strukturert metode klare å finne egnet litteratur på biblioteket på egenhånd? Studien oppgaven bygger på har til hensikt å undersøke om elever klarer å finne seg egnet litteratur på skolebiblioteket på egenhånd. Forskning viser at elever som leser på egenhånd for å utvikle lesingen sin, trenger tekster på et umiddelbart lesenivå. Det vil si at elevene skal forstå og kunne avkode 94% av ordene de leser. (Frost ...

  18. Grønland som del af den bibelske fortælling - en 1700-tals studie

    DEFF Research Database (Denmark)

    Kjærgaard, Kathrine

    2010-01-01

     For missionærerne i Grønland som for de fleste andre i 1700-tallet var Bibelen en historisk sand fortælling om verden, der omfattede hele verdenshistorien fra Skabelsen til de sidste tider. Bibelen var ikke bare en sand historie om fortiden, den var også en sand historie om nutiden og om fremtid...

  19. Prototype moving-ring reactor

    International Nuclear Information System (INIS)

    Smith, A.C. Jr.; Ashworth, C.P.; Abreu, K.E.

    1981-01-01

    The objective of this work was to design a prototype fusion reactor based on fusion plasmas confined as ''Compact Toruses.' Six major criteria guided the prototype design. The prototype must: (1) produce net electricity decisively (P/sub net/ >70% of P/sub gross/), with P/sub net/ approximately 100 MW(e); (2) have small physical size (low project cost) but commercial plant; (3) have all features required of commerical plants; (4) avoid unreasonable extrapolation of technology; (5) minimize nuclear issues substantially, i.e. accident and waste issues of public concern, and (6) be modular (to permit repetitive fabrication of parts) and be maintainable with low occupational radiological exposures

  20. Silicon telescope for prototype sensor characterisation using particle beam and cosmic rays

    CERN Multimedia

    Fu, Jinlin

    2016-01-01

    We present the design and the performance of a silicon strip telescope that we have built and recently used as reference tracking system for prototype sensor characterisation. The telescope was operated on beam at the CERN SPS and also using cosmic rays in the laboratory. We will describe the data acquisition system, based on a custom electronic board that we have developed, and the online monitoring system to control the quality of the data in real time.

  1. Eight plane IPND [Integration Prototype Near Detector] mechanical testing

    International Nuclear Information System (INIS)

    Zhao, A.; Guarino, V.; Wood, K.; Nephew, T.; Ayres, D.

    2008-01-01

    A mechanical test of an 8 plane IPND mechanical prototype, which was constructed using extrusions from the testing/tryout of the 16 cell prototype extrusion die in Argonne National Laboratory, was conducted. There were 4 vertical and 4 horizontal planes in this 8 plane IPND prototype. Each vertical plane had four 16 cell extrusions, while each horizontal plane had six 16 cell extrusions. Each plane was glued together using the formulation of Devcon adhesive, Devcon 60. The vertical extrusions used in the vertical planes shares the same dimensions as the horizontal extrusions in the horizontal planes with the average web thickness of 2.1 mm and the average wall thickness of 3.1 mm. This mechanical prototype was constructed with end-seals on the both ends of the vertical extrusions. The gaps were filled with epoxy between extrusions and end-seals. The overall dimension of IPND is 154.8 by 103.1 by 21.7 inches with the weight of approximately 1200 kg, as shown in a figure. Two similar mechanical tests of 3 layer and 11 layer prototypes have been done in order to evaluate the strength of the adhesive joint between extrusions in the NOvA detector. The test showed that the IPND prototype was able to sustain under the loading of weight of itself and scintillator. Two FEA models were built to verify the measurement data from the test. The prediction from FEA slice model seems correlated reasonably well to the test result, even under a 'rough' estimated condition for the wall thickness (from an untuned die) and an unknown property of 'garage type' extrusion. A full size of FEA 3-D model also agrees very well with the test data from strain gage readings. It is worthy to point out that the stress distribution of the structure is predominantly determined by the internal pressure, while the buckling stability relies more on the loading weight from the extrusions themselves and scintillate. Results of conducted internal pressure tests, including 3- cell, 11-cell and the IPND

  2. Different chemical composition of free light, occluded light and extractable SOM fractions in soils of Cerrado and tilled and untilled fielfds, Minas Gerais, Brazil: a pyrolysis-GC/MS study

    NARCIS (Netherlands)

    Buurman, P.; Roscob, R.

    2011-01-01

    To investigate both the effect of land-use systems on SOM characteristics and the effect of occlusion in aggregates on chemical composition of the occluded fraction, SOM fractions of soils under Cerrado, no-tillage and conventional tillage, were investigated. Free light, occluded light and

  3. Fokus på fremme af livskvalitet og trivsel hos personer med demens gennem læringsmodel med musikterapi og Dementia Care Mapping som det fælles omdrejningspunkt

    DEFF Research Database (Denmark)

    Ottesen, Aase Marie

    . Beskrivelse af den metode som er anvendt Metodisk er projektet tilrettelagt som et casestudie af et musikterapiforløb. I læringsmodellen tages afsæt i Tom Kitwoods teori og værdigrundlag om en personorienteret omsorg. Dementia Care Mapping (DCM) anvendes i læringsforløbet til at belyse de relationelle møder......, der opstår i musikterapien. Samtidig anvendes DCM som pædagogisk metode i feedbackprocessen med omsorgsgiverne, hvor der arbejdes på at give omsorgsgiverne redskaber til at bruge musik aktivt i deres interaktion med personer med demens i forskellige samværssituationer. Projektets teoretiske...

  4. Arbejdsmiljøseminarer som et redskab til at skabe motivation, ansvarlighed og ejerskab til arbejdet omkring forebyggelse af ulykker i små-, mellemstore og store virksomheder, såvel blandt ansatte som deres ledere

    DEFF Research Database (Denmark)

    Pedersen, Louise; Kines, Pete

    2009-01-01

    af arbejdsulykker. Vellykkede arbejdsmiljøseminarer kan være en metode til skabe motivation, ansvarlighed og ejerskab samt at mindske den modstand, der kan være imod forandringerne. Med andre ord at arbejde med nogle af de processer, som kan være svære at få indblik i og overskud til at arbejde med i...

  5. Laboratory directed research and development

    Energy Technology Data Exchange (ETDEWEB)

    1991-11-15

    The purposes of Argonne's Laboratory Directed Research and Development (LDRD) Program are to encourage the development of novel concepts, enhance the Laboratory's R D capabilities, and further the development of its strategic initiatives. Among the aims of the projects supported by the Program are establishment of engineering proof-of-principle''; development of an instrumental prototype, method, or system; or discovery in fundamental science. Several of these project are closely associated with major strategic thrusts of the Laboratory as described in Argonne's Five Year Institutional Plan, although the scientific implications of the achieved results extend well beyond Laboratory plans and objectives. The projects supported by the Program are distributed across the major programmatic areas at Argonne. Areas of emphasis are (1) advanced accelerator and detector technology, (2) x-ray techniques in biological and physical sciences, (3) advanced reactor technology, (4) materials science, computational science, biological sciences and environmental sciences. Individual reports summarizing the purpose, approach, and results of projects are presented.

  6. Prototype spent-fuel canister design, analysis, and test

    International Nuclear Information System (INIS)

    Leisher, W.B.; Eakes, R.G.; Duffey, T.A.

    1982-03-01

    Sandia National Laboratories was asked by the US Energy Research and Development Administration (now US Department of Energy) to design the spent fuel shipping cask system for the Clinch River Breeder Reactor Plant (CRBRP). As a part of this task, a canister which holds liquid sodium and the spent fuel assembly was designed, analyzed, and tested. The canister body survived the regulatory Type-B 9.1-m (30-ft) drop test with no apparent leakage. However, the commercially available metal seal used in this design leaked after the tests. This report describes the design approach, analysis, and prototype canister testing. Recommended work for completing the design, when funding is available, is included

  7. Towards an Operational Framework for Architectural Prototyping

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    2005-01-01

    We use a case study in architectural prototyping as input for presenting a first, tentative, framework describing key concepts and their relationships in architectural prototyping processes.......We use a case study in architectural prototyping as input for presenting a first, tentative, framework describing key concepts and their relationships in architectural prototyping processes....

  8. Life sciences payload definition and integration study. Volume 4: Appendix, costs, and data management requirements of the dedicated 30-day laboratory. [carry-on laboratory for Spacelab

    Science.gov (United States)

    1974-01-01

    The results of the updated 30-day life sciences dedicated laboratory scheduling and costing activities are documented, and the 'low cost' methodology used to establish individual equipment item costs is explained in terms of its allowances for equipment that is commerical off-the-shelf, modified commercial, and laboratory prototype; a method which significantly lowers program costs. The costs generated include estimates for non-recurring development, recurring production, and recurring operations costs. A cost for a biomedical emphasis laboratory and a Delta cost to provide a bioscience and technology laboratory were also generated. All cost reported are commensurate with the design and schedule definitions available.

  9. Miniaturized inertial impactor for personal airborne particulate monitoring: Prototyping

    Science.gov (United States)

    Pasini, Silvia; Bianchi, Elena; Dubini, Gabriele; Cortelezzi, Luca

    2017-11-01

    Computational fluid dynamic (CFD) simulations allowed us to conceive and design a miniaturized inertial impactor able to collect fine airborne particulate matter (PM10, PM2.5 and PM1). We created, by 3D printing, a prototype of the impactor. We first performed a set of experiments by applying a suction pump to the outlets and sampling the airborne particulate of our laboratory. The analysis of the slide showed a collection of a large number of particles, spanning a wide range of sizes, organized in a narrow band located below the exit of the nozzle. In order to show that our miniaturized inertial impactor can be truly used as a personal air-quality monitor, we performed a second set of experiments where the suction needed to produce the airflow through the impactor is generated by a human being inhaling through the outlets of the prototype. To guarantee a number of particles sufficient to perform a quantitative characterization, we collected particles performing ten consecutive deep inhalations. Finally, the potentiality for realistic applications of our miniaturized inertial impactor used in combination with a miniaturized single-particle detector will be discussed. CARIPLO Fundation - project MINUTE (Grant No. 2011-2118).

  10. Search for electron decay mode e- → γ + νe with prototype of Borexino detector

    International Nuclear Information System (INIS)

    Back, H.O.; Balata, M.; Bari, A. de.

    2002-01-01

    The prototype of the Borexino detector Counting Test Facility, located in the Gran Sasso laboratory, has been used to obtain a bound on the stability of the electron. The new lower limit on the mean lifetime defined on 32.1 days of data set is τ(e - → γ + ν e ) ≥ 4.6 · 10 26 years (90 % C.L.)

  11. «Ikke stå som en slapp potet» - elevsynspunkter på opplæring i muntlige ferdigheter

    Directory of Open Access Journals (Sweden)

    Sigrun Svenkerud

    2013-06-01

    Full Text Available Tema for artikkelen er arbeid med muntlige ferdigheter. Jeg studerer hva elever mener de lærer om muntlige ferdigheter og hvordan de erfarer dette arbeidet, inkludert hva slags veiledning og støtte elevene får underveis i arbeids-prosessen. Analysen baserer seg på enkeltintervjuer med tolv elever, sju jenter og fem gutter på 9. trinn (15 år fra to skoler. Resultatet viser at arbeidet med muntlige ferdigheter hovedsakelig består i elevframføringer, som er en relativt fri og elevaktiv arbeidsform. Elevene får lite undervisning og veiledning fra lærerne underveis i arbeidet, og det forventes at de kan arbeide selvstendig. Det er selve utførelsen av de muntlige framføringene elevene definerer som muntlige ferdigheter. Elevene er opptatt av å framstå som frie og sikre talere, og mange øver seg på framføringene hjemme. De har få eksempler på hva de har lært, og få svar på hva de trenger kunnskap om. Det kan være et uttrykk for elevenes begrensede innsikt i kunnskapsområdet for muntlige ferdigheter, men også for at de mangler et begrepsapparat for å formidle hva de kan. For videre arbeid med muntlighet ligger det en utfordring i å utvikle et eksplisitt og bredere repertoar i undervisningsformer knyttet til muntlige ferdigheter.

  12. Usefulness of Computed Tomography in pre-surgical evaluation of maxillo-facial pathology with rapid prototyping and surgical pre-planning by virtual reality

    International Nuclear Information System (INIS)

    Toso, Francesco; Zuiani, Chiara; Vergendo, Maurizio; Bazzocchi, Massimo; Salvo, Iolanda; Robiony, Massimo; Politi, Massimo

    2005-01-01

    Purpose. To validate a protocol for creating virtual models to be used in the construction of solid prototypes useful for the planning-simulation of maxillo-facial surgery, in particular for very complex anatomical and pathologic problems. To optimize communications between the radiology, engineering and surgical laboratories. Methods and materials. We studied 16 patients with different clinical problems of the maxillo-facial district. Exams were performed with multidetector computed tomography (MDCT) and single slice computed tomography (SDCT) with axial scans and collimation of 0.5-2 mm, and reconstruction interval of 1 mm. Subsequently we performed 2D multiplanar reconstructions and 3D volume-rendering reconstructions. We exported the DICOM images to the engineering laboratory, to recognize and isolate the bony structures by software. With these data the solid prototypes were generated using stereolitography. To date, surgery has been preformed on 12 patients after simulation of the procedure on the stereolitography model. Results. The solid prototypes constructed in the difficult cases were sufficiently detailed despite problems related to the artefacts generated by dental fillings and prostheses. In the remaining cases the MPR/3D images were sufficiently detailed for surgical planning. The surgical results were excellent in all patients who underwent surgery, and the surgeons were satisfied with the improvement in quality and the reduction in time required for the procedure. Conclusions. MDCT enables rapid prototyping using solid replication, which was very helpful in maxillofacial surgery, despite problems related to artifacts due to dental fillings and prosthesis within the acquisition field; solutions for this problem are work in progress. The protocol used for communication between the different laboratories was valid and reproducible [it

  13. Rapid Prototyping of Formally Modelled Distributed Systems

    OpenAIRE

    Buchs, Didier; Buffo, Mathieu; Titsworth, Frances M.

    1999-01-01

    This paper presents various kinds of prototypes, used in the prototyping of formally modelled distributed systems. It presents the notions of prototyping techniques and prototype evolution, and shows how to relate them to the software life-cycle. It is illustrated through the use of the formal modelling language for distributed systems CO-OPN/2.

  14. Discursos em disputa: uma leitura alternativa acerca dos dilemas da ação internacional na Somália durante a década de 1990

    Directory of Open Access Journals (Sweden)

    Marta Regina Fernandez Y Garcia Moreno

    2014-01-01

    Full Text Available O artigo aborda os dilemas enfrentados pelos atores internacionais nas operações de paz levadas a cabo na Somália na década de 1990. Busca-se evidenciar as narrativas divergentes articuladas pelos Estados Unidos e pelas Nações Unidas vis-à-vis o "Outro" somali. Sugere-se que os principais dilemas experimentados pela ONU e pelos Estados Unidos na Somália não foram de natureza técnica, concernente a problemas de coordenação entre as principais forças envolvidas, como usualmente se argumenta. Diferentemente, argumenta-se que existiu uma disputa de natureza política entre os Estados Unidos e a ONU na Somália, amparada por discursos distintos sobre o "Outro" somali.

  15. Tester og testtilbakemeldinger som direkte bidragsytere til dypere læring blant studenter

    Directory of Open Access Journals (Sweden)

    Henrik Herrebrøden

    2014-11-01

    Full Text Available Denne artikkelen diskuterer forskning som tilsier at tester og testtilbakemeldinger kan bidra til dypere læring blant studenter. Testing har vist seg å forbedre langtidshukommelsen av innlært kunnskap sammenlignet med repetert lesing, noe som kalles for testeffekten. For at testeffekten skal optimaliseres, bør tester utformes med mål om å bidra til dyp prosessering av innlært kunnskap. Testtilbakemeldingers rolle i utdanning kan være å bidra til økt metakognitiv selvregulering blant studenter. For at selvregulering skal promoteres best mulig, bør testtilbakemeldinger inneholde utdypende informasjon. Samlet ser tester og testtilbakemeldinger ut til å være nyttige læringsverktøy og potensielle bidragsytere til dypere læring blant studenter.AbstractThis article discusses research supporting that tests and test feedback are learning tools that may promote deeper learning among students. Testing improves long-term retention of knowledge compared to repeated study, a phenomenon known as the testing effect. In order to promote the testing effect, tests should facilitate deep processing of knowledge among students. Test feedback has the potential to increase students’ metacognitive self-regulation. For this type of metacognition to be enhanced, feedback should contain elaborate information. Conclusively, tests and test feedback appear to be valuable learning tools and potential promoters of deeper learning.

  16. Development of New, Low-Head Hydropower Turbine - Modeling & Laboratory Test DE-EE0005426

    Energy Technology Data Exchange (ETDEWEB)

    Krouse, Wayne [Hydro Green Energy, Westmont, IL (United States)

    2014-12-05

    Hydro Green Energy, LLC (HGE) will complete the design, fabrication and laboratory testing of a scaled, vertically stackable, low-head hydropower turbine called the Modular Bulb Turbine (MBT). HGE will also complete a summary report that includes the laboratory testing results and analysis of the tests. Project Goals: Design, model and test modular bulb turbine for installation in numerous HGE low-head hydropower projects at non-powered USACE dams. Project Results: The sub-scale prototype was tested successfully at a leading US hydraulic laboratory. Laboratory data results agreed well with predicted results from numerical modeling.

  17. Laboratory scale prototype of a low-speed electrodynamic levitation system based on a Halbach magnet array

    International Nuclear Information System (INIS)

    Iniguez, J; Raposo, V

    2009-01-01

    In this paper we analyse the behaviour of a small-scale model of a magnetic levitation system based on the Inductrack concept. Drag and lift forces acting on our prototype, moving above a continuous copper track, are studied analytically following a simple low-speed approach. The experimental results are in good agreement with the theoretical calculations. 3D-numerical simulations are also used to highlight the significance of the edge effects and to extrapolate the results to higher speeds

  18. Laboratory scale prototype of a low-speed electrodynamic levitation system based on a Halbach magnet array

    Energy Technology Data Exchange (ETDEWEB)

    Iniguez, J; Raposo, V [Departamento de Fisica Aplicada, Universidad de Salamanca, E-37071 (Spain)

    2009-03-15

    In this paper we analyse the behaviour of a small-scale model of a magnetic levitation system based on the Inductrack concept. Drag and lift forces acting on our prototype, moving above a continuous copper track, are studied analytically following a simple low-speed approach. The experimental results are in good agreement with the theoretical calculations. 3D-numerical simulations are also used to highlight the significance of the edge effects and to extrapolate the results to higher speeds.

  19. Architectural Prototyping in Industrial Practice

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2008-01-01

    Architectural prototyping is the process of using executable code to investigate stakeholders’ software architecture concerns with respect to a system under development. Previous work has established this as a useful and cost-effective way of exploration and learning of the design space of a system......, in addressing issues regarding quality attributes, in addressing architectural risks, and in addressing the problem of knowledge transfer and conformance. Little work has been reported so far on the actual industrial use of architectural prototyping. In this paper, we report from an ethnographical study...... and focus group involving architects from four companies in which we have focused on architectural prototypes. Our findings conclude that architectural prototypes play an important role in resolving problems experimentally, but less so in exploring alternative solutions. Furthermore, architectural...

  20. PEAR: Prototyping Expressive Animated Robots - A framework for social robot prototyping

    OpenAIRE

    Balit , Etienne; Vaufreydaz , Dominique; Reignier , Patrick

    2018-01-01

    International audience; Social robots are transitioning from lab experiments to commercial products, creating new needs for proto-typing and design tools. In this paper, we present a framework to facilitate the prototyping of expressive animated robots. For this, we start by reviewing the design of existing social robots in order to define a set of basic components of social robots. We then show how to extend an existing 3D animation software to enable the animation of these components. By co...

  1. POLOCAM: a millimeter wavelength cryogenic polarimeter prototype for MUSIC-POL

    Science.gov (United States)

    Laurent, Glenn T.; Vaillancourt, John E.; Savini, Giorgio; Ade, Peter A. R.; Beland, Stephane; Glenn, Jason; Hollister, Matthew I.; Maloney, Philip R.; Sayers, Jack

    2012-09-01

    As a proof-of-concept, we have constructed and tested a cryogenic polarimeter in the laboratory as a prototype for the MUSIC instrument (Multiwavelength Sub/millimeter Kinetic Inductance Camera). The POLOCAM instrument consists of a rotating cryogenic polarization modulator (sapphire half-waveplate) and polarization analyzer (lithographed copper polarizers deposited on a thin film) placed into the optical path at the Lyot stop (4K cold pupil stop) in a cryogenic dewar. We present an overview of the project, design and performance results of the POLOCAM instrument (including polarization efficiencies and instrumental polarization), as well as future application to the MUSIC-POL instrument.

  2. Influencia del tipo e intensidad de luz en la formación y multiplicación de embriones somáticos de soya

    Directory of Open Access Journals (Sweden)

    Jorge Liusvert Pérez Pérez

    2012-07-01

    Full Text Available Título en ingles: Influence of light type and intensity on induction and proliferation of somatic embryos in soybean Resumen: La embriogénesis somática representa una alternativa para la regeneración de plantas, sobre la cual influyen diversos factores durante el cultivo in vitro. Entre estos, las condiciones de iluminación durante la formación de embriones somáticos es determinante. Sin embargo, no existen trabajos que refieran el efecto de la luz solar en la formación de embriones somáticos de soya. Este trabajo tuvo como objetivo evaluar el efecto del tipo e intensidad de luz en la formación y multiplicación de embriones somáticos de soya cultivar INCASoy-27. Para ello, cotiledones inmaduros de 3,0-4,0 mm de longitud fueron colocados en medio de cultivo con 40 mg.l-1 de ácido 2,4-diclorofenoxiacético, sacarosa 3% y pH 7,0 en cámaras de crecimiento con luz artificial e intensidades luminosas de 5-10 µmol.m-2.s-1 y 68-73 µmol.m-2.s-1, y en cámaras de crecimiento con luz solar con 50-65µmol.m-2.s-1. El mayor número de cotiledones embriogénicos (95,31 se obtuvo en condiciones de luz artificial con alta intensidad luminosa. La mayor formación de embriones somáticos se obtuvo en luz artificial (9,65 y luz solar (8,45 respectivamente con alta intensidad luminosa. No se encontraron diferencias significativas en la multiplicación de los embriones somáticos, al emplear ambas fuente de luz con alta intensidad luminosa. Esta es la primera referencia sobre formación y multiplicación de embriones somáticos de soya con empleo de luz solar. Palabras clave: Cultivo de tejido; embriogénesis somática; fotoperíodo; Glycine max. Abstract: The somatic embryogenesis represents an alternative for the regeneration of plants, in which influence diverse factors during the cultivation. Among these factors, the conditions of illumination during the induction of somatic embryos are determinant. However, works not exist that refer the effect

  3. Results from a prototype MAPS sensor telescope and readout system with zero suppression for the heavy flavor tracker at STAR

    International Nuclear Information System (INIS)

    Greiner, L.; Matis, H.S.; Ritter, H.G.; Rose, A.; Stezelberger, T.; Sun, X.; Szelezniak, M.; Thomas, J.; Vu, C.; Wieman, H.

    2008-01-01

    We describe a three Mimostar-2 Monolithic Active Pixel Sensor (MAPS) sensor telescope prototype with an accompanying readout system incorporating on-the-fly data sparsification. The system has been characterized and we report on the measured performance of the sensor telescope and readout system in beam tests conducted both at the Advanced Light Source (ALS) at Lawrence Berkeley National Laboratory (LBNL) and in the STAR experiment at the Relativistic Heavy Ion Collider (RHIC). This effort is part of the development and prototyping work that will lead to a vertex detector for the STAR experiment

  4. Optimering av nanocellulosa för tillämpning som papperstyrkeadditiv

    OpenAIRE

    Englöf, Johan

    2015-01-01

    Syftet med projektet var att undersöka hur homogeniserings förhållanden (tryck antal passager och därmed energiinsatsen) vid framställning av MFC (mikrofibrillär cellulosa), från enzymatiskt förbehandlade pappersmassafibrer påverkar hållfastheten av papper förstärkt med MFC. Arbetsgivaren för projektet var Innventia och det laborativa arbetet har utförts i deras lokaler. Fördelen med att använda MFC som tillsats i papper är att arket blir starkare [1]. Detta medför att en mindre mängd materia...

  5. The Scintillator Tile Hadronic Calorimeter Prototype

    International Nuclear Information System (INIS)

    Rusinov, V.

    2006-01-01

    A high granularity scintillator hadronic calorimeter prototype is described. The calorimeter is based on a novel photodetector - Silicon Photo-Multiplier (SiPM). The main parameters of SiPM are discussed as well as readout cell construction and optimization. The experience with a small prototype production and testing is described. A new 8 k channel prototype is being manufactured now

  6. Virtual Video Prototyping for Healthcare Systems

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Bossen, Claus; Lykke-Olesen, Andreas

    2002-01-01

    Virtual studio technology enables the mixing of physical and digital 3D objects and thus expands the way of representing design ideas in terms of virtual video prototypes, which offers new possibilities for designers by combining elements of prototypes, mock-ups, scenarios, and conventional video....... In this article we report our initial experience in the domain of pervasive healthcare with producing virtual video prototypes and using them in a design workshop. Our experience has been predominantly favourable. The production of a virtual video prototype forces the designers to decide very concrete design...... issues, since one cannot avoid paying attention to the physical, real-world constraints and to details in the usage-interaction between users and technology. From the users' perspective, during our evaluation of the virtual video prototype, we experienced how it enabled users to relate...

  7. Thermo-mechanical modelling and experimental validation of CLIC prototype module type 0

    CERN Document Server

    Kortelainen, Lauri; Koivurova, Hannu; Riddone, Germana; Österberg, Kenneth

    Micron level stability of the two-meter repetitive modules constituting the two main linacs is one of the most important requirements to achieve the luminosity goal for the Compact Linear Collider. Structural deformations due to thermal loads and related to the RF power dissipated inside the modules affect the alignment of the linacs and therefore the resulting luminosity performance. A CLIC prototype module has been assembled in a dedicated laboratory and a thermal test program has been started in order to study its thermo-mechanical behaviour. This thesis focuses on the finite elements modelling of the first CLIC prototype module 0. The aim of the modelling is to examine the temperature distributions and the resulting deformations of the module in different operating conditions defined in the thermal test program. The theoretical results have been compared to the experimental ones; the comparison shows that the results are in good agreement both for the thermal behaviour of the module and for the resulting ...

  8. Prompt and Precise Prototyping

    Science.gov (United States)

    2003-01-01

    For Sanders Design International, Inc., of Wilton, New Hampshire, every passing second between the concept and realization of a product is essential to succeed in the rapid prototyping industry where amongst heavy competition, faster time-to-market means more business. To separate itself from its rivals, Sanders Design aligned with NASA's Marshall Space Flight Center to develop what it considers to be the most accurate rapid prototyping machine for fabrication of extremely precise tooling prototypes. The company's Rapid ToolMaker System has revolutionized production of high quality, small-to-medium sized prototype patterns and tooling molds with an exactness that surpasses that of computer numerically-controlled (CNC) machining devices. Created with funding and support from Marshall under a Small Business Innovation Research (SBIR) contract, the Rapid ToolMaker is a dual-use technology with applications in both commercial and military aerospace fields. The advanced technology provides cost savings in the design and manufacturing of automotive, electronic, and medical parts, as well as in other areas of consumer interest, such as jewelry and toys. For aerospace applications, the Rapid ToolMaker enables fabrication of high-quality turbine and compressor blades for jet engines on unmanned air vehicles, aircraft, and missiles.

  9. Guasom Analysis Of The Alhambra Survey

    Science.gov (United States)

    Garabato, Daniel; Manteiga, Minia; Dafonte, Carlos; Álvarez, Marco A.

    2017-10-01

    GUASOM is a data mining tool designed for knowledge discovery in large astronomical spectrophotometric archives developed in the framework of Gaia DPAC (Data Processing and Analysis Consortium). Our tool is based on a type of unsupervised learning Artificial Neural Networks named Self-organizing maps (SOMs). SOMs permit the grouping and visualization of big amount of data for which there is no a priori knowledge and hence they are very useful for analyzing the huge amount of information present in modern spectrophotometric surveys. SOMs are used to organize the information in clusters of objects, as homogeneously as possible according to their spectral energy distributions, and to project them onto a 2D grid where the data structure can be visualized. Each cluster has a representative, called prototype which is a virtual pattern that better represents or resembles the set of input patterns belonging to such a cluster. Prototypes make easier the task of determining the physical nature and properties of the objects populating each cluster. Our algorithm has been tested on the ALHAMBRA survey spectrophotometric observations, here we present our results concerning the survey segmentation, visualization of the data structure, separation between types of objects (stars and galaxies), data homogeneity of neurons, cluster prototypes, redshift distribution and crossmatch with other databases (Simbad).

  10. Uso do ultra-som para punção venosa central em paciente obeso com adenomegalia cervical

    Directory of Open Access Journals (Sweden)

    Jaderson Wollmeister

    2008-08-01

    Full Text Available JUSTIFICATICA E OBJETIVOS: As técnicas clássicas para punção venosa central são realizadas com base em referências anatômicas de superfície e conhecimento da anatomia vascular da região em que se realizará a punção. O uso do ultra-som permite a realização da punção sob visão direta das estruturas vasculares, peri-vasculares e da agulha de punção. O objetivo deste relato foi descrever o uso do ultra-som no auxílio de acesso venoso central em paciente obeso e com adenomegalias. RELATO DO CASO: Paciente do sexo masculino, branco, 28 anos, 1,70 m, 120 kg, com diagnóstico de linfoma de Hodgkin esclerose nodular. Solicitado ao Serviço de Anestesiologia do Hospital Governador Celso Ramos, punção de veia jugular interna direita guiada por ultra-som devido à presença de gânglio supraclavicular que prejudicava a referência anatômica de punção e à obesidade do paciente. Após a obtenção da melhor imagem a veia jugular interna esquerda foi puncionada e colocado um cateter venoso de triplo lúmen. A punção foi única, com progressão fácil do cateter e realizada sem complicações. CONCLUSÕES: O uso da ultra-sonografia para punção venosa central pode evitar complicações tornando o procedimento mais seguro para o paciente.

  11. Rapid prototyping: een veelbelovende methode

    NARCIS (Netherlands)

    Haverman, T.M.; Karagozoglu, K.H.; Prins, H.; Schulten, E.A.J.M.; Forouzanfar, T.

    2013-01-01

    Rapid prototyping is a method which makes it possible to produce a three-dimensional model based on two-dimensional imaging. Various rapid prototyping methods are available for modelling, such as stereolithography, selective laser sintering, direct laser metal sintering, two-photon polymerization,

  12. Combined heat pump for sanitary hot water and space heating with CO{sub 2} as refrigerant; Kombineret brugsvands- og rumvarmepumpe med CO{sub 2} som koelemiddel

    Energy Technology Data Exchange (ETDEWEB)

    Schoen Poulsen, C. [Teknologisk Institut (Denmark)

    2006-05-19

    This project report describes the implementation of the Danish project called 'Combined heat pump for sanitary hot water and space heating with CO{sub 2} as refrigerant'. In the course of the project, a combined heat pump has been developed for heating sanitary hot water and producing domestic space heating. The project shows that CO2 has excellent properties in systems where a high temperature is desired on the gas cooler side and that it is possible to combine the production of sanitary hot water with the production of domestic space heating. During the project, a number of system solutions have been analysed and at the end of the project a prototype was built. It was tested in the laboratory according to a current Dutch standard for heat pumps for sanitary hot water. The prototype was constructed without the space heat part which solely has been analysed according to calculations. The reason is that there currently are no applicable European standards for the testing of combined systems and as the total efficiency of the system mainly depends on the temperature out of the gas cooler it was decided not to spend resources on the construction of the combined system in the prototype version of the unit. Instead, a number of proposals have been submitted to how the system with a space heat section could be constructed. The main components used in the prototype (compressor, exchangers, valve, control and tank) are all partly commercially available and therefore focus has been on the system construction. During the project, a number of CFD calculations have been carried out on the gas cooler in the hot water tank and the results show how important it is that the gas cooler is designed and placed correctly. The laboratory tests carried out on the unit show that the COP of the heat pump plant in connection with sanitary hot water tapping (according to Dutch standard) is 1.4 1.5 which is not immediately satisfactory. But when it is considered that the unit is a

  13. Detection of pigments of halophilic endoliths from gypsum: Raman portable instrument and European Space Agency's prototype analysis

    Science.gov (United States)

    Culka, Adam; Osterrothová, Kateřina; Hutchinson, Ian; Ingley, Richard; McHugh, Melissa; Oren, Aharon; Edwards, Howell G. M.; Jehlička, Jan

    2014-01-01

    A prototype instrument, under development at the University of Leicester, for the future European Space Agency (ESA) ExoMars mission, was used for the analysis of microbial pigments within a stratified gypsum crust from a hypersaline saltern evaporation pond at Eilat (Israel). Additionally, the same samples were analysed using a miniaturized Raman spectrometer, featuring the same 532 nm excitation. The differences in the position of the specific bands, attributed to carotenoid pigments from different coloured layers, were minor when analysed by the ESA prototype instrument; therefore, making it difficult to distinguish among the different pigments. The portable Delta Nu Advantage instrument allowed for the discrimination of microbial carotenoids from the orange/green and purple layers. The purpose of this study was to complement previous laboratory results with new data and experience with portable or handheld Raman systems, even with a dedicated prototype Raman system for the exploration of Mars. The latter is equipped with an excitation wavelength falling within the carotenoid polyene resonance region. The ESA prototype Raman instrument detected the carotenoid pigments (biomarkers) with ease, although further detailed distinctions among them were not achieved. PMID:25368354

  14. Detection of pigments of halophilic endoliths from gypsum: Raman portable instrument and European Space Agency's prototype analysis.

    Science.gov (United States)

    Culka, Adam; Osterrothová, Kateřina; Hutchinson, Ian; Ingley, Richard; McHugh, Melissa; Oren, Aharon; Edwards, Howell G M; Jehlička, Jan

    2014-12-13

    A prototype instrument, under development at the University of Leicester, for the future European Space Agency (ESA) ExoMars mission, was used for the analysis of microbial pigments within a stratified gypsum crust from a hypersaline saltern evaporation pond at Eilat (Israel). Additionally, the same samples were analysed using a miniaturized Raman spectrometer, featuring the same 532 nm excitation. The differences in the position of the specific bands, attributed to carotenoid pigments from different coloured layers, were minor when analysed by the ESA prototype instrument; therefore, making it difficult to distinguish among the different pigments. The portable Delta Nu Advantage instrument allowed for the discrimination of microbial carotenoids from the orange/green and purple layers. The purpose of this study was to complement previous laboratory results with new data and experience with portable or handheld Raman systems, even with a dedicated prototype Raman system for the exploration of Mars. The latter is equipped with an excitation wavelength falling within the carotenoid polyene resonance region. The ESA prototype Raman instrument detected the carotenoid pigments (biomarkers) with ease, although further detailed distinctions among them were not achieved. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

  15. Exploring the Potential of Smartphones and Tablets for Performance Support in Food Chemistry Laboratory Classes

    Science.gov (United States)

    van der Kolk, Koos; Hartog, Rob; Beldman, Gerrit; Gruppen, Harry

    2013-12-01

    Increasingly, mobile applications appear on the market that can support students in chemistry laboratory classes. In a multiple app-supported laboratory, each of these applications covers one use-case. In practice, this leads to situations in which information is scattered over different screens and written materials. Such a multiple app-supported laboratory will become awkward with the growth of the number of applications and use cases. In particular, using and switching between applications is likely to induce extraneous cognitive load that can easily be avoided. The manuscript describes the design of a prototype smartphone web app (LabBuddy) designed to support students in food chemistry laboratory classes. The manuscript describes a case study ( n = 26) of the use of a LabBuddy prototype in such a laboratory class. Based on the evaluation of this case study, design requirements for LabBuddy were articulated. LabBuddy should work on HTML5 capable devices, independent of screen size, by having a responsive layout. In addition, LabBuddy should enable a student using LabBuddy to switch between devices without much effort. Finally, LabBuddy should offer an integrated representation of information.

  16. Window prototypes during the project

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe

    1996-01-01

    The conditions for the PASSYS test and the results of the measurements on one of the aerogel window prototypes are described.......The conditions for the PASSYS test and the results of the measurements on one of the aerogel window prototypes are described....

  17. Sandia Laboratories plutonium protection system

    International Nuclear Information System (INIS)

    Bernard, E.A.; Miyoshi, D.S.; Gutierrez, F.D.

    1977-01-01

    Sandia Laboratories is developing an improved plutonium protection system (PPS) to demonstrate new concepts for enhancing special nuclear materials safeguards. PPS concepts include separation of functions, real-time item accountability and improved means for control of materials, activities and personnel access. Physical barriers and a secure communications network are designed into the system to offer greater protection against sabotage, diversion and theft attempts. Prototype systems are being constructed at Hanford, Washington and Albuquerque, New Mexico and will be subjected to a comprehensive testing and evaluation program

  18. Test case preparation using a prototype

    OpenAIRE

    Treharne, Helen; Draper, J.; Schneider, Steve A.

    1998-01-01

    This paper reports on the preparation of test cases using a prototype within the context of a formal development. It describes an approach to building a prototype using an example. It discusses how a prototype contributes to the testing activity as part of a lifecycle based on the use of formal methods. The results of applying the approach to an embedded avionics case study are also presented.

  19. Self-organizing maps of Kohonen (SOM) applied to multidimensional monitoring data of the IEA-R1 nuclear research reactor

    International Nuclear Information System (INIS)

    Affonso, Gustavo S.; Pereira, Iraci M.; Mesquita, Roberto N. de; Bueno, Elaine I.

    2011-01-01

    Multivariate statistics comprise a set of statistical methods used in situations where many variables are database space subsets. Initially applied to human, social and biological sciences, these methods are being applied to many other areas such as education, geology, chemistry, physics, engineering, and many others. This spectra expansion was possible due to recent technological development of computation hardware and software that allows high and complex databases to be treated iteratively enabling further analysis. Following this trend, the neural networks called Self-Organizing Maps are turning into a powerful tool on visualization of implicit and unknown correlations in big sized database sets. Originally created by Kohonen in 1981, it was applied to speech recognition tasks. The SOM is being used as a comparative parameter to evaluate the performance of new multidimensional analysis methodologies. Most of methods require good variable input selection criteria and SOM has contributed to clustering, classification and prediction of multidimensional engineering process variables. This work proposes a method of applying SOM to a set of 58 IEA-R1 operational variables at IPEN research reactor which are monitored by a Data Acquisition System (DAS). This data set includes variables as temperature, flow mass rate, coolant level, nuclear radiation, nuclear power and control bars position. DAS enables the creation and storage of historical data which are used to contribute to Failure Detection and Monitoring System development. Results show good agreement with previous studies using other methods as GMDH and other predictive methods. (author)

  20. Self-organizing maps of Kohonen (SOM) applied to multidimensional monitoring data of the IEA-R1 nuclear research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Affonso, Gustavo S.; Pereira, Iraci M.; Mesquita, Roberto N. de, E-mail: rnavarro@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Bueno, Elaine I., E-mail: ebueno@ifsp.gov.b [Instituto Federal de Educacao, Ciencia e Tecnologia de Sao Paulo (IFSP), SP (Brazil)

    2011-07-01

    Multivariate statistics comprise a set of statistical methods used in situations where many variables are database space subsets. Initially applied to human, social and biological sciences, these methods are being applied to many other areas such as education, geology, chemistry, physics, engineering, and many others. This spectra expansion was possible due to recent technological development of computation hardware and software that allows high and complex databases to be treated iteratively enabling further analysis. Following this trend, the neural networks called Self-Organizing Maps are turning into a powerful tool on visualization of implicit and unknown correlations in big sized database sets. Originally created by Kohonen in 1981, it was applied to speech recognition tasks. The SOM is being used as a comparative parameter to evaluate the performance of new multidimensional analysis methodologies. Most of methods require good variable input selection criteria and SOM has contributed to clustering, classification and prediction of multidimensional engineering process variables. This work proposes a method of applying SOM to a set of 58 IEA-R1 operational variables at IPEN research reactor which are monitored by a Data Acquisition System (DAS). This data set includes variables as temperature, flow mass rate, coolant level, nuclear radiation, nuclear power and control bars position. DAS enables the creation and storage of historical data which are used to contribute to Failure Detection and Monitoring System development. Results show good agreement with previous studies using other methods as GMDH and other predictive methods. (author)

Some links on this page may take you to non-federal websites. Their policies may differ from this site.