WorldWideScience

Sample records for solvent takes place

  1. Taking place, screening place

    DEFF Research Database (Denmark)

    Hansen, Kim Toft; Waade, Anne Marit

    2019-01-01

    We introduce location studies as a new empirical approach to screen studies. Location studies represent an interdisciplinary perspective, including media, aesthetics and geography, and reflect a growing interest in places in a global media and consumption culture. The chapter analyses two recent......) with one being traditional and the other being commercial; both dramas include discussions of localities and social heritage, and both use local sports as a common metaphor for social cohesion; and both series have been partly funded by a local film Danish commissioner. However, The Legacy is shot...... to a large extent in studios, while Norskov is shot entirely on location. The study is based on interviews with producers, broadcasters, location scouts, production designers and writers, as well as quantitative and qualitative textual analyses of television drama series, the geographical places, and related...

  2. Then Daddy Takes His Place in an Australian Landscape

    OpenAIRE

    ERIN GAYLE CROUCH

    2018-01-01

    This writing accompanies a 62 minute, single channel, digital film work also titled Then Daddy Takes His Place in an Australian Landscape. The research considers themes of loss and disorientation in the above film and the film practice of Belgian filmmaker Chantal Akerman. Formally, the following writing interweaves critical engagements with Akerman’s films including No Home Movie (2015), Jeanne Dielman, 23 Commerce Quay, 1080 Brussels(1975), Là Bas (2006), with personal stories and reflecti...

  3. Mathematical modeling of phase interaction taking place in materials processing

    International Nuclear Information System (INIS)

    Zinigrad, M.

    2002-01-01

    The quality of metallic products depends on their composition and structure. The composition and the structure are determined by various physico-chemical and technological factors. One of the most important and complicated problems in the modern industry is to obtain materials with required composition, structure and properties. For example, deep refining is a difficult task by itself, but the problem of obtaining the material with the required specific level of refining is much more complicated. It will take a lot of time and will require a lot of expanses to solve this problem empirically and the result will be far from the optimal solution. The most effective way to solve such problems is to carry out research in two parallel direction. Comprehensive analysis of thermodynamics, kinetics and mechanisms of the processes taking place at solid-liquid-gaseous phase interface and building of the clear well-based physico-chemical model of the above processes taking into account their interaction. Development of mathematical models of the specific technologies which would allow to optimize technological processes and to ensure obtaining of the required properties of the products by choosing the optimal composition of the raw materials. We apply the above unique methods. We developed unique methods of mathematical modeling of phase interaction at high temperatures. These methods allows us to build models taking into account: thermodynamic characteristics of the processes, influence of the initial composition and temperature on the equilibrium state of the reactions, kinetics of homogeneous and heterogeneous processes, influence of the temperature, composition, speed of the gas flows, hydrodynamic and thermal factors on the velocity of the chemical and diffusion processes. The models can be implemented in optimization of various metallurgical processes in manufacturing of steels and non-ferrous alloys as well as in materials refining, alloying with special additives

  4. Does olfactory specific satiety take place in a natural setting?

    Science.gov (United States)

    Fernandez, P; Bensafi, M; Rouby, C; Giboreau, A

    2013-01-01

    Olfactory-specific satiety (OSS) is characterized by a specific decrease in the odor pleasantness of a food eaten to satiety or smelled without ingestion. The usual protocol for studying OSS takes place in laboratory, a setting rather removed from the real world. Here, we set out to examine OSS in a natural setting: during a meal in a restaurant. We hypothesized that an aroma contained in a food that is eaten at the beginning of a meal decreases the pleasantness of the flavor of a food with the same aroma eaten at the end of the meal. In the first experiment (Experiment 1), a test group received an appetizer flavored with a test aroma (anise) at the beginning of the meal. After the main dish, they received a dessert flavored with the same aroma. A control group received the same aromatized dessert, but after a non-aromatized appetizer. This experiment was replicated (Experiment 2) using verbena as the test aroma. For both experiments, results revealed that aroma pleasantness, but not intensity or familiarity, significantly decreased in the test groups vs. the control groups. These findings extend the concept of OSS to a realistic eating context. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Key European Grid event to take place in Geneva

    CERN Multimedia

    2006-01-01

    EGEE'06 is the main conference of the EGEE project, which is co-funded by the European Union and hosted by CERN. More than 90 partners all over Europe and beyond are working together in EGEE to provide researchers in both academia and industry with access to major computing resources, independent of their geographic location. The largest user community of the EGEE Grid is the High-Energy Physics community and in particular the LHC experiments, which are already making heavy use of the infrastructure to prepare for data taking. However, with the many new challenges faced by EGEE in its second phase that started in April this year, an even broader audience than at previous EGEE conferences is expected. In particular, a large number of related Grid projects will feature prominently in both plenary and parallel sessions during the 5 days of this event. Industry will also be well represented, highlighting the EGEE project's commitment to technology transfer to industry. CERN is the host of the conference, which i...

  6. 4th openlab Board of Sponsors Meeting takes place at CERN on July 6, 2005

    CERN Multimedia

    Patrice Loïez

    2005-01-01

    The 4th openlab Board of Sponsors Meeting is taking place at CERN, room 513, 1-024, the 6th July 2005. The meeting will open with an Executive Session in the presence of Dr. Robert Aymar, Director General of CERN

  7. Waste Disposal: Processes Taking Place (on the way) from the Repository to the Biosphere

    International Nuclear Information System (INIS)

    Put, M.

    2000-01-01

    The main objective of SCK-CEN's R and D programme on the processes taking place on the way from the repository to the biosphere is to provide reliable and defensible models and parameters on the migration of dissolved radionuclides and gases through the host formation (Boom Clay) and the backfill materials of a deep geological repository for high level radioactive waste. The programme and main achievements in this topical area in 1999 are summarised

  8. Diffusion mechanisms taking place at the early stages of cobalt deposition on Au(111)

    International Nuclear Information System (INIS)

    Oviedo, O A; Leiva, E P M; Mariscal, M M

    2008-01-01

    In the present work a detailed atomic-level analysis of some of the main diffusion mechanisms which take place during cobalt adatom deposition are studied within atom dynamics (AD) and the nudged elastic band (NEB) method. Our computer simulations reveal a very fast exchange between Co and Au atoms when the deposit is a single cobalt adatom. However, when the nucleus size increases, a decrease in the exchange probability is observed. Activation energies for different transitions are obtained using AD in combination with the NEB method

  9. DETERMINING THE FEATURES OF SPORTSWEAR TAKING PLACE IN FAST FASHION COLLECTIONS

    Directory of Open Access Journals (Sweden)

    Birsen ÇİLEROĞLU

    2014-07-01

    Full Text Available Spor ts occupies the first place among most siginificant factors increasing quality of life . It has b ecome difficult to allocate proper time for sports in the course of heavy work pace and flow of life . Such circumstances have led people to increase minor sport activities which could be done during short times allocated from daily living, thus, orienting people‟s clothing preference towards sportswear . The feeling of easiness and comfort sportswear offer to individuals enhances further such preference . The feeling of comfort individuals feel in their clothing depends on the presence of physiologic and psy chologic coherence between their bodies and environment . Demand for sportswear allowing easy - movement increased upon rise in life dynamism and standards, it began to be preferred regarding comfort of use and to take its place in daily clothing, too, define d as “casual” clothing . Spor tswear being preferred very much ; has caused the firms making and producing fashion and clothing design to give place in their collections to sportswear category . Particularly, in firms where model and clothing varieties are pl enty and new model design is made in short intervals, named as, “fast fashion” , tendency towards sportswear is growing increasingly . The sale rates of sportswear, utilization rates of which are growing increasingly, has maximum value among total clothing s ales in E - business field, too. In this research, it has been aimed to determine the features of sportswear taking place in “fast fashion” clothing collections . In order to accomplish this aim, 2014 collections of four different brands taking place in natio nal and international markets have been examined through visual analysis method . In the examinations; sportswear styles of the brand, model and style differences between brands and states of using 2014 fashion trends have been taken into account. The data obtained at the end of the analyses made have been

  10. [Marketing approval and market surveillance of medical devices in Germany: Where does policy integration take place?].

    Science.gov (United States)

    Lang, Achim

    2014-01-01

    Since 2011 new regulatory measures regarding medical devices have been set up with the aim to eliminate obstacles to innovations and to find more coordinated ways to marketing authorisation and market surveillance. This essay investigates whether these new and existing coordination mechanisms build up to a Joined-up Government approach. The analysis shows that the regulatory process should be adjusted along several dimensions. First, many organisations lack awareness regarding their stakeholders and focus solely on their immediate organisational activities. Second, the regulatory process (marketing authorisation and market surveillance) is too fragmented for an effective communication to take place. Finally, the underlying strategy process is an ad-hoc approach lacking continuity and continued involvement of, in particular, the responsible federal ministries. Copyright © 2013. Published by Elsevier GmbH.

  11. What it Takes to Successfully Implement Technology for Aging in Place: Focus Groups With Stakeholders.

    Science.gov (United States)

    Peek, Sebastiaan Theodorus Michaël; Wouters, Eveline J M; Luijkx, Katrien G; Vrijhoef, Hubertus J M

    2016-05-03

    There is a growing interest in empowering older adults to age in place by deploying various types of technology (ie, eHealth, ambient assisted living technology, smart home technology, and gerontechnology). However, initiatives aimed at implementing these technologies are complicated by the fact that multiple stakeholder groups are involved. Goals and motives of stakeholders may not always be transparent or aligned, yet research on convergent and divergent positions of stakeholders is scarce. To provide insight into the positions of stakeholder groups involved in the implementation of technology for aging in place by answering the following questions: What kind of technology do stakeholders see as relevant? What do stakeholders aim to achieve by implementing technology? What is needed to achieve successful implementations? Mono-disciplinary focus groups were conducted with participants (n=29) representing five groups of stakeholders: older adults (6/29, 21%), care professionals (7/29, 24%), managers within home care or social work organizations (5/29, 17%), technology designers and suppliers (6/29, 21%), and policy makers (5/29, 17%). Transcripts were analyzed using thematic analysis. Stakeholders considered 26 different types of technologies to be relevant for enabling independent living. Only 6 out of 26 (23%) types of technology were mentioned by all stakeholder groups. Care professionals mentioned fewer different types of technology than other groups. All stakeholder groups felt that the implementation of technology for aging in place can be considered a success when (1) older adults' needs and wishes are prioritized during development and deployment of the technology, (2) the technology is accepted by older adults, (3) the technology provides benefits to older adults, and (4) favorable prerequisites for the use of technology by older adults exist. While stakeholders seemed to have identical aims, several underlying differences emerged, for example, with regard

  12. Model of Wagons’ Placing-In and Taking-Out Problem in a Railway Station and Its Heuristic Algorithm

    Directory of Open Access Journals (Sweden)

    Chuijiang Guo

    2014-01-01

    Full Text Available Placing-in and taking-out wagons timely can decrease wagons’ dwell time in railway stations, improve the efficiency of railway transportation, and reduce the cost of goods transportation. We took the locomotive running times between goods operation sites as weights, so the wagons’ placing-in and taking-out problem could be regarded as a single machine scheduling problem, 1pijCmax, which could be transformed into the shortest circle problem in a Hamilton graph whose relaxation problem was an assignment problem. We used a Hungarian algorithm to calculate the optimal solution of the assignment problem. Then we applied a broken circle and connection method, whose computational complexity was O(n2, to find the available satisfactory order of wagons’ placing-in and taking-out. Complex problems, such as placing-in and transferring combined, taking-out and transferring combined, placing-in and taking-out combined, or placing-in, transferring, and taking-out combined, could also be resolved with the extended algorithm. A representative instance was given to illustrate the reliability and efficiency of our results.

  13. Taking back place-names – from dusty library to digital life

    DEFF Research Database (Denmark)

    Knudsen, Bo Nissen

    Danish place-names have been under publication since 1922 in the scientific series Danmarks Stednavne (Place-Names of Denmark) but only recently the huge project of a digitization of the series has been undertaken. Around 120,000 name articles are now on their way to the web as part of the Digital...... atlas of the Danish historical-administrative geography. Digitization and presentation of a scientific place-names edition poses many interesting problems in itself, especially regarding the variation over time in both the selection of names and the build-up of scholarly knowledge. How are we to convey...... mobility of the book format into a digital context – by making the content available as an application for mobile devices such as smart phones and iPads? Adding geocodes to the name articles could open up the possibility of a digital place-name lexicon allowing the end user to move around in a place...

  14. DSC studies of retrogradation and amylose-lipid transition taking place in gamma-irradiated wheat starch

    International Nuclear Information System (INIS)

    Ciesla, K.; Gluszewski, W.; Eliasson, A.C.

    2006-01-01

    It has been already shown that degradation resulting from gamma irradiation induces a decrease in order of starch granules and influences gelatinisation taking place during heating of starch and flour suspensions. In presented paper, DSC (differential scanning calorimetry) studies were carried out for wheat starch, non-irradiated and irradiated using doses in the range from 5 to 30 kGy. The influence of the conditions applied during DSC measurements on the possibility to observe differences between the amylose-lipid complex transition and retrogradation taking place in the non-irradiated and particularly irradiated starch samples was checked. The better differentiation between the amylose-lipid complex transition taking place in particular samples accompanied by the better reproducity were obtained in the case of dense suspensions as compared to the watery suspensions as well as during the first analysis performed for the recrystallised gels

  15. What it takes to successfully implement technology for aging in place: focus groups with stakeholders

    NARCIS (Netherlands)

    Eveline J.M. Wouters; Katrien G. Luijkx; Hubertus J.M. Vrijhoef; Sebastiaan Theodorus Michaël Peek MSc

    2016-01-01

    BACKGROUND: There is a growing interest in empowering older adults to age in place by deploying various types of technology (ie, eHealth, ambient assisted living technology, smart home technology, and gerontechnology). However, initiatives aimed at implementing these technologies are complicated by

  16. Advice from Rural Elders: What It Takes to Age in Place

    Science.gov (United States)

    Dye, Cheryl J.; Willoughby, Deborah F.; Battisto, Dina G.

    2011-01-01

    Older adults prefer to age in place (AIP), and there are psychological, physiological, and economic benefits in doing so. However, it is especially challenging to AIP in rural communities. AIP models have been tested in urban settings and age-segregated communities, but they are not appropriate for rural communities. This paper presents rural AIP…

  17. DETERMINING THE FEATURES OF SPORTSWEAR TAKING PLACE IN FAST FASHION COLLECTIONS

    OpenAIRE

    ÇİLEROĞLU, Birsen; KIVILCIMLAR, İnci

    2015-01-01

    Sports occupies the first place among most siginificant factors increasing quality of life. It has become difficult to allocate proper time for sports in the course of heavy work pace and flow of life. Such circumstances have led people to increase minor sport activities which could be done during short times allocated from daily living, thus, orienting people’s clothing preference towards sportswear. The feeling of easiness and comfort sportswear offer to individuals enhances further such pr...

  18. Beyond stereotypes of adolescent risk taking: Placing the adolescent brain in developmental context

    Directory of Open Access Journals (Sweden)

    Daniel Romer

    2017-10-01

    Full Text Available Recent neuroscience models of adolescent brain development attribute the morbidity and mortality of this period to structural and functional imbalances between more fully developed limbic regions that subserve reward and emotion as opposed to those that enable cognitive control. We challenge this interpretation of adolescent development by distinguishing risk-taking that peaks during adolescence (sensation seeking and impulsive action from risk taking that declines monotonically from childhood to adulthood (impulsive choice and other decisions under known risk. Sensation seeking is primarily motivated by exploration of the environment under ambiguous risk contexts, while impulsive action, which is likely to be maladaptive, is more characteristic of a subset of youth with weak control over limbic motivation. Risk taking that declines monotonically from childhood to adulthood occurs primarily under conditions of known risks and reflects increases in executive function as well as aversion to risk based on increases in gist-based reasoning. We propose an alternative Life-span Wisdom Model that highlights the importance of experience gained through exploration during adolescence. We propose, therefore, that brain models that recognize the adaptive roles that cognition and experience play during adolescence provide a more complete and helpful picture of this period of development.

  19. Understanding Where Americas Public Discussion Takes Place In Todays Society: Case Studies of Concealed Weapons Carry Reform

    Science.gov (United States)

    2016-06-01

    arguing that concealed carry permit holders are a danger to public safety and that mass shootings are taking place by citizens who are legally armed.2...who worked at an abortion clinic that had recently been bombed and whose life had been threatened was denied a license to carry because he was not...populace. The new law laid out new prohibitions and penalties enforceable statewide. Additionally, the Preemption Act was necessary to set the legal

  20. Coronavirus and influenza virus proteolytic priming takes place in tetraspanin-enriched membrane microdomains.

    Science.gov (United States)

    Earnest, James T; Hantak, Michael P; Park, Jung-Eun; Gallagher, Tom

    2015-06-01

    Coronaviruses (CoVs) and low-pathogenicity influenza A viruses (LP IAVs) depend on target cell proteases to cleave their viral glycoproteins and prime them for virus-cell membrane fusion. Several proteases cluster into tetraspanin-enriched microdomains (TEMs), suggesting that TEMs are preferred virus entry portals. Here we found that several CoV receptors and virus-priming proteases were indeed present in TEMs. Isolated TEMs, when mixed with CoV and LP IAV pseudoparticles, cleaved viral fusion proteins to fusion-primed fragments and potentiated viral transductions. That entering viruses utilize TEMs as a protease source was further confirmed using tetraspanin antibodies and tetraspanin short hairpin RNAs (shRNAs). Tetraspanin antibodies inhibited CoV and LP IAV infections, but their virus-blocking activities were overcome by expressing excess TEM-associated proteases. Similarly, cells with reduced levels of the tetraspanin CD9 resisted CoV pseudoparticle transductions but were made susceptible by overproducing TEM-associated proteases. These findings indicated that antibodies and CD9 depletions interfere with viral proteolytic priming in ways that are overcome by surplus proteases. TEMs appear to be exploited by some CoVs and LP IAVs for appropriate coengagement with cell receptors and proteases. Enveloped viruses use their surface glycoproteins to catalyze membrane fusion, an essential cell entry step. Host cell components prime these viral surface glycoproteins to catalyze membrane fusion at specific times and places during virus cell entry. Among these priming components are proteases, which cleave viral surface glycoproteins, unleashing them to refold in ways that catalyze virus-cell membrane fusions. For some enveloped viruses, these proteases are known to reside on target cell surfaces. This research focuses on coronavirus and influenza A virus cell entry and identifies TEMs as sites of viral proteolysis, thereby defining subcellular locations of virus

  1. Let us play: (unshackling liaisons, (unmasking games and (unhindered dialogue in the arena where theology takes place

    Directory of Open Access Journals (Sweden)

    Tanya van Wyk

    2017-10-01

    Full Text Available This contribution is a political-theological and hermeneutical reflection on the origin, nature, intention and contribution of a research theme identified within the dynamics of an institutional space, by taking a critical look at the �rules� and the �game� of university academia. Specific reference is made to institutional and faculty research themes, namely �reconciling diversity� and �Ecodomy � life in its fullness�. The institutional academic space is compared to a Hunger Games-style panopticon, with its �rules� and �play�. It is argued that these research themes can only make an authentic contribution if the �play� and �game�of the space in which these themes originate, are deconstructed. If this deconstruction can take place, there might be an authentic chance for unhindered dialogue towards the transformation of the academic space and the greater community it serves.

  2. The albedo problem in the case of multiple synthetic scattering taking place in a plane-symmetric slab

    International Nuclear Information System (INIS)

    Shafiq, A.; Meyer, H.E. de; Grosjean, C.C.

    1985-01-01

    An approximate model based on an improved diffusion-type theory is established for treating multiple synthetic scattering in a homogeneous slab of finite thickness. As in the case of the exact treatment given in the preceding paper (Part I), it appears possible to transform the considered transport problem into an equivalent fictitious one involving multiple isotropic scattering, therefore permitting the application of an established corrected diffusion theory for treating isotropic scattering taking place in a convex homogeneous medium bounded by a vacuum in the presence of various types of sources. The approximate values of the reflection and transmission coefficients are compared with the rigorous values listed in Part I. In this way, the high accuracy of the approximation is clearly demonstrated. (author)

  3. DSC Studies of Retrogradation and Amylose-Lipid Complex Transition Taking Place in Gamma Irradiated Wheat Starch

    International Nuclear Information System (INIS)

    Ciesla, K.

    2006-01-01

    Degradation resulting from gamma irradiation induces decrease in order of starch granules and influences the processes occurring in starch-water system. Differential scanning calorimetry (DSC) was applied at present for studying the effect of radiation with doses of 5 - 30 kGy on amylose-lipid complex transition and retrogradation occurring in wheat starch gels. Influence of the conditions applied during DSC measurements and intermediate storage was tested on the possibility to observe radiation effect. Wheat starch was irradiated with 60 C o gamma rays in a gamma cell Issledovatiel placed in the Department of Radiation Chemistry, INCT. DSC measurements were performed for ca. 50% and ca. 20% gels during heating - cooling - heating cycles (up to 3 cycles) in the temperature range 10 - 150 degree at heating and cooling rates of 10, 5 and 2.5 degree min - 1. The Seiko DSC 6200 calorimeter was used. Decrease in amylose-lipid complex transition temperature was found already after irradiation of wheat starch with a dose of 5 kGy showing modificatin of the complex structure. The differences between the irradiated and the non-irradiated samples became the easier seen in the every foregoing heating or cooling cycle as compared to the preceeding one. It is because that thermal treatment causes decrease of transition temperature in all the irradiated samples, with no effect or increase of that temperature observed in the non-irradiated ones. Irradiation hinders retrogradation taking place in ca. 50% gels but facilitates retrogradation occurring in ca. 20 % gels. Moreover, the expanded differences between the amylose-lipid complex formed in the irradiated and non-irradiated gels result due to their recrystallisation. Storage of the gels induces decrease in the temperature of the complex transition as compared to the last cycle of the first analysis. That decrease was, however, more significant in the case of all the irradiated samples than in the case of the initial sample. In

  4. Where and How Do Aging Processes Take Place in Everyday Life? Answers From a New Materialist Perspective

    Directory of Open Access Journals (Sweden)

    Grit Höppner

    2018-04-01

    Full Text Available In the last decade, the focus of studies on age and aging has fundamentally changed from biological to symbolic, discursive, and cultural phenomena. Currently, the most studied topic in material gerontology is the materiality of age and aging in the context of everyday life. Scholars in this area have thus been making an important contribution to a material understanding of aging processes. As we understand them, however, both social constructivist and material gerontological concepts reach their limit when it comes to the questions of where and how aging processes actually take place in everyday life. In order to answer these two questions, we review social constructivist ideas with a particular focus on the “doing age” concept and material gerontological assumptions regarding human subjects, their material environments, and their relations. We then suggest rethinking bodily limitations and agencies addressed by scholars in the field of new materialism. The aim is to develop a new materialist-inspired understanding of aging processes that helps to reconstruct the material-discursive co-production of aging processes. These processes are deployed as mutual entanglements of materiality and meaning as well as of humans and non-human agency. This approach emphasizes the decentralization of the human actor and thus helps to map the material-discursive complexity of aging processes as relational co-products of humans and non-humans in everyday life.

  5. What does it take to make them stay? : how place satisfaction relates to willingness to stay of the creative class

    OpenAIRE

    Annell, Jonas; Terman, Felix

    2017-01-01

    Swedish students in smaller university host cities leave in favor of more attractive places after having completed their studies. Failing to retain newly graduated students is a problem for university host cities as educated people are associated with the group referred to as the creative class. Members of the creative class are drivers of regional economic growth, and have historically proven to be important for creating and developing the well-being of cities. Different place attributes hav...

  6. Young People Take Their Rightful Places as Full and Contributing Members of a World Class Workforce: Philadelphia Youth Network Annual Report 2006

    Science.gov (United States)

    Philadelphia Youth Network, 2006

    2006-01-01

    The title of this year's annual report has particular meaning for all of the staff at the Philadelphia Youth Network. The phrase derives from Philadelphia Youth Network's (PYN's) new vision statement, developed as part of its recent strategic planning process, which reads: All of our city's young people take their rightful places as full and…

  7. Stuck between a ROC and a hard place? Barriers to the take up of green energy in the UK

    International Nuclear Information System (INIS)

    Diaz-Rainey, Ivan; Ashton, John K.

    2008-01-01

    This paper examines the UK mechanisms for ensuring future investment in renewable energy through consumer adoption of green energy tariffs and the Renewable Obligation Certificate (ROC) system. Using a national survey and focus groups the stated willingness by UK customers to pay a premium for renewable or green energy and actual take up of such tariffs is assessed. Substantial differences between willingness to pay for and the adoption of green energy tariffs are reported. This disparity is linked to a range of factors including consumer confusion, lack of supply, complexities of constructing 'green source' tariffs under the ROC system and a lack of customer trust. It is concluded that the re-definition of the green energy market in favour of 'green source' tariffs, greater direct compliance with the Renewable Obligation by addressing supply constraints, and efforts in providing clearer information and choices for consumers via a compulsory green energy accreditation scheme are required if willing consumers' are to contribute to investment in renewable energy

  8. The Investigation of Mobbing Events Taking Place at Higher Education Institutions in Turkey Considering the Reflections on Media

    Directory of Open Access Journals (Sweden)

    Çubukçu Zühal

    2015-08-01

    considering that they are published nationally, reference newspapers and belong to different publication groups. The data used in this study was taken from the archive of the three newspapers. When the archives of the newspapers was scanned, the word “mobbing” was taken as key word for the search. In qualitative researches, newspapers are considered to be public archive and used as reference documents. The data obtained was grouped depending on the newspapers which it was taken from, on the year of publication, on where they took place, on the gender of the victims and on who the sufferers are.

  9. When and Where Learning is Taking Place: Multisynaptic Changes in Strength During Different Behaviors Related to the Acquisition of an Operant Conditioning Task by Behaving Rats.

    Science.gov (United States)

    Fernández-Lamo, Iván; Delgado-García, José M; Gruart, Agnès

    2018-03-01

    Although it is generally assumed that brain circuits are modified by new experiences, the question of which changes in synaptic efficacy take place in cortical and subcortical circuits across the learning process remains unanswered. Rats were trained in the acquisition of an operant conditioning in a Skinner box provided with light beams to detect animals' approaches to lever and feeder. Behaviors such as pressing the lever, eating, exploring, and grooming were also recorded. Animals were chronically implanted with stimulating and recording electrodes in hippocampal, prefrontal, and subcortical sites relevant to the task. Field synaptic potentials were evoked during the performance of the above-mentioned behaviors and before, during, and after the acquisition process. Afferent pathways to the hippocampus and the intrinsic hippocampal circuit were slightly modified in synaptic strength during the performance of those behaviors. In contrast, afferent and efferent circuits of the medial prefrontal cortex were significantly modified in synaptic strength across training sessions, mostly at the moment of the largest change in the learning curve. Performance of behaviors nondirectly related to the acquisition process (exploring, grooming) also evoked changes in synaptic strength across training. This study helps to understand when and where learning is being engraved in the brain. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  10. Thin Places

    OpenAIRE

    Lockwood, Sandra Elizabeth

    2013-01-01

    This inquiry into the three great quests of the twentieth century–the South Pole, Mount Everest, and the Moon–examines our motivations to venture into these sublime, yet life-taking places. The Thin Place was once the destination of the religious pilgrim seeking transcendence in an extreme environment. In our age, the Thin Place quest has morphed into a challenge to evolve beyond the confines of our own physiology; through human ingenuity and invention, we reach places not meant to accommod...

  11. Solvent selection methodology for pharmaceutical processes: Solvent swap

    DEFF Research Database (Denmark)

    Papadakis, Emmanouil; Kumar Tula, Anjan; Gani, Rafiqul

    2016-01-01

    A method for the selection of appropriate solvents for the solvent swap task in pharmaceutical processes has been developed. This solvent swap method is based on the solvent selection method of Gani et al. (2006) and considers additional selection criteria such as boiling point difference...... in pharmaceutical processes as well as new solvent swap alternatives. The method takes into account process considerations such as batch distillation and crystallization to achieve the swap task. Rigorous model based simulations of the swap operation are performed to evaluate and compare the performance...

  12. Solvent extraction

    Energy Technology Data Exchange (ETDEWEB)

    Coombs, D.M.; Latimer, E.G.

    1988-01-05

    It is an object of this invention to provide for the demetallization and general upgrading of heavy oil via a solvent extracton process, and to improve the efficiency of solvent extraction operations. The yield and demetallization of product oil form heavy high-metal content oil is maximized by solvent extractions which employ either or all of the following techniques: premixing of a minor amount of the solvent with feed and using countercurrent flow for the remaining solvent; use of certain solvent/free ratios; use of segmental baffle tray extraction column internals and the proper extraction column residence time. The solvent premix/countercurrent flow feature of the invention substantially improves extractions where temperatures and pressures above the critical point of the solvent are used. By using this technique, a greater yield of extract oil can be obtained at the same metals content or a lower metals-containing extract oil product can be obtained at the same yield. Furthermore, the premixing of part of the solvent with the feed before countercurrent extraction gives high extract oil yields and high quality demetallization. The solvent/feed ratio features of the invention substanially lower the captial and operating costs for such processes while not suffering a loss in selectivity for metals rejection. The column internals and rsidence time features of the invention further improve the extractor metals rejection at a constant yield or allow for an increase in extract oil yield at a constant extract oil metals content. 13 figs., 3 tabs.

  13. Deasphalting solvents

    International Nuclear Information System (INIS)

    Carrillo, J. A; Caceres, J; Vela, G; Bueno, H

    1996-01-01

    This paper describes how the deasphalted oil (DMO) or demetalized oil (DMO) quality (CCR, Ni, V end asphaltenes contents) changes with: DAO or DMO yield, solvent/feed ratio, type of vacuum reside (from paraffinic to blends with vis breaking bottoms), extraction temperature and extraction solvent (propane, propylene, n-butane and I butane)

  14. Effect of health-promoting posters placed on the platforms of two train stations in Copenhagen, Denmark, on the choice between taking the stairs or the escalators

    DEFF Research Database (Denmark)

    Iversen, Mette Kathrine; Händel, M N; Nydal Jensen, Eva

    2007-01-01

    OBJECTIVE: The purpose of this study was to determine whether posters placed on the platforms of two train stations in Copenhagen, promoting use of the stairs, would encourage people to use the stairs rather than the adjacent escalator. An additional purpose was to see if the effect of the interv......OBJECTIVE: The purpose of this study was to determine whether posters placed on the platforms of two train stations in Copenhagen, promoting use of the stairs, would encourage people to use the stairs rather than the adjacent escalator. An additional purpose was to see if the effect...... of the intervention was maintained for a week after the poster was removed. MEASUREMENTS: The number of people using stairs and escalators at Copenhagen Central Station and Østerport Train Station in Copenhagen was recorded before and during posters promoting stair use were placed on the platforms, and a week after...... the posters were removed. Two years after the posters were removed, data were collected for 1 week at Østerport Train Station (long-term post-intervention). RESULTS: At Copenhagen Central Station, the overall stair use increased from 12% before the intervention to 16% (P

  15. Solvent substitution

    International Nuclear Information System (INIS)

    1990-01-01

    The DOE Environmental Restoration and Waste Management Office of Technology Development and the Air Force Engineering and Services Center convened the First Annual International Workshop on Solvent Substitution on December 4--7, 1990. The primary objectives of this joint effort were to share information and ideas among attendees in order to enhance the development and implementation of required new technologies for the elimination of pollutants associated with industrial use of hazardous and toxic solvents; and to aid in accelerating collaborative efforts and technology transfer between government and industry for solvent substitution. There were workshop sessions focusing on Alternative Technologies, Alternative Solvents, Recovery/Recycling, Low VOC Materials and Treatment for Environmentally Safe Disposal. The 35 invited papers presented covered a wide range of solvent substitution activities including: hardware and weapons production and maintenance, paint stripping, coating applications, printed circuit boards, metal cleaning, metal finishing, manufacturing, compliance monitoring and process control monitoring. This publication includes the majority of these presentations. In addition, in order to further facilitate information exchange and technology transfer, the US Air Force and DOE solicited additional papers under a general ''Call for Papers.'' These papers, which underwent review and final selection by a peer review committee, are also included in this combined Proceedings/Compendium. For those involved in handling, using or managing hazardous and toxic solvents, this document should prove to be a valuable resource, providing the most up-to-date information on current technologies and practices in solvent substitution. Individual papers are abstracted separated

  16. Solvent substitution

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    The DOE Environmental Restoration and Waste Management Office of Technology Development and the Air Force Engineering and Services Center convened the First Annual International Workshop on Solvent Substitution on December 4--7, 1990. The primary objectives of this joint effort were to share information and ideas among attendees in order to enhance the development and implementation of required new technologies for the elimination of pollutants associated with industrial use of hazardous and toxic solvents; and to aid in accelerating collaborative efforts and technology transfer between government and industry for solvent substitution. There were workshop sessions focusing on Alternative Technologies, Alternative Solvents, Recovery/Recycling, Low VOC Materials and Treatment for Environmentally Safe Disposal. The 35 invited papers presented covered a wide range of solvent substitution activities including: hardware and weapons production and maintenance, paint stripping, coating applications, printed circuit boards, metal cleaning, metal finishing, manufacturing, compliance monitoring and process control monitoring. This publication includes the majority of these presentations. In addition, in order to further facilitate information exchange and technology transfer, the US Air Force and DOE solicited additional papers under a general Call for Papers.'' These papers, which underwent review and final selection by a peer review committee, are also included in this combined Proceedings/Compendium. For those involved in handling, using or managing hazardous and toxic solvents, this document should prove to be a valuable resource, providing the most up-to-date information on current technologies and practices in solvent substitution. Individual papers are abstracted separated.

  17. NS [Nuclear Safety] update. Current safety and security activities and developments taking place in the Department of Nuclear Safety and Security, Issue no. 6, March 2008

    International Nuclear Information System (INIS)

    2008-03-01

    The current issue presents information about the following activities: 1) International Conference on Illicit Nuclear Trafficking which took place in November 2007 in Edinburgh. The principal aim of the conference was to examine the threat and context of illicit nuclear trafficking of radioactive material, specifically, what is being done to combat such trafficking and where more needs to be done. The conference was also to consider how the obligations and commitments of the legally binding and non-binding international instruments could be and are being implemented by various States. 2) INSAG Message on Nuclear Safety Infrastructure in which the INSAG Chairman Richard Meserve addressed nuclear safety in the current context and various issues that warrant special attention. 3) approved for publication the Safety Requirements publication on Safety of Nuclear Fuel Cycle Facilities. 4) The Asian Nuclear Safety Network (ANSN)

  18. NS [Nuclear Safety] update. Current safety and security activities and developments taking place in the Department of Nuclear Safety and Security, Issue no. 8, September 2008

    International Nuclear Information System (INIS)

    2008-09-01

    The current issue presents information about the following activities: 1) International Workshops on Denial of Shipments raise awareness of suppliers, recipients, regulators, carriers/consignors and international organizations of the problems relating to denials of radioactive shipments to determine effective measures to prevent or reduce the instances of shipment denials and delays. 2) Communication and knowledge Management in the Department of Nuclear Safety and Security (NS). 3) Nuclear Security at the Beijing Olympics - an excellent example of the IAEA's work in protecting large scale public events. 4) The Incident and Emergency Centre's Participation in the ConvEx 3 Exercise, 9-10 July 2008, which took place at the Laguna Verde nuclear power plant in Mexico. During the 43 hour long exercise, the Incident and Emergency Centre (IEC) was fully activated. Staff members participating in the exercise represented different departments within the IAEA and the diversity of their knowledge and experience ensured an effective response

  19. NS [Nuclear Safety] update. Current safety and security activities and developments taking place in the Department of Nuclear Safety and Security. Issue no. 2, January 2007

    International Nuclear Information System (INIS)

    2006-08-01

    This newsletter reports on the training of cardiologists in radiation protection, IAEA's safety review services and the operational safety assessment review team (OSART), the international conference on management of spent fuel and the recent INSAG (International Nuclear Safety Group) publications. The IAEA has begun a major international initiative to train interventional cardiologists in radiation protection. Starting with the first course in May 2004, so far 6 regional and 3 national training courses have been conducted with the participation of over 400 health professionals putting the IAEA in a leading role in this area. A programme of two days' training has been developed, covering possible and observed radiation effects among patients and staff, international standards, dose management techniques, examples of good and bad practice and examples indicating prevention of possible injuries as a result of good practice in radiation protection. The training material is freely available on CD and will be placed on the Radiological Protection of Patients website at http://rpop.iaea.org/

  20. Place-focused physical activity research, human agency, and social justice in public health: taking agency seriously in studies of the built environment.

    Science.gov (United States)

    Blacksher, Erika; Lovasi, Gina S

    2012-03-01

    Built environment characteristics have been linked to health outcomes and health disparities. However, the effects of an environment on behavior may depend on human perception, interpretation, motivation, and other forms of human agency. We draw on epidemiological and ethical concepts to articulate a critique of research on the built environment and physical activity. We identify problematic assumptions and enumerate both scientific and ethical reasons to incorporate subjective perspectives and public engagement strategies into built environment research and interventions. We maintain that taking agency seriously is essential to the pursuit of health equity and the broader demands of social justice in public health, an important consideration as studies of the built environment and physical activity increasingly focus on socially disadvantaged communities. Attention to how people understand their environment and navigate competing demands can improve the scientific value of ongoing efforts to promote active living and health, while also better fulfilling our ethical obligations to the individuals and communities whose health we strive to protect. Copyright © 2011 Elsevier Ltd. All rights reserved.

  1. Leaf processing behaviour in Atta leafcutter ants: 90% of leaf cutting takes place inside the nest, and ants select pieces that require less cutting.

    Science.gov (United States)

    Garrett, Ryan W; Carlson, Katherine A; Goggans, Matthew Scott; Nesson, Michael H; Shepard, Christopher A; Schofield, Robert M S

    2016-01-01

    Leafcutter ants cut trimmings from plants, carry them to their underground nests and cut them into smaller pieces before inoculating them with a fungus that serves as a primary food source for the colony. Cutting is energetically costly, so the amount of cutting is important in understanding foraging energetics. Estimates of the cutting density, metres of cutting per square metre of leaf, were made from samples of transported leaf cuttings and of fungal substrate from field colonies of Atta cephalotes and Atta colombica. To investigate cutting inside the nest, we made leaf-processing observations of our laboratory colony, A. cephalotes. We did not observe the commonly reported reduction of the leaf fragments into a pulp, which would greatly increase the energy cost of processing. Video clips of processing behaviours, including behaviours that have not previously been described, are linked. An estimated 2.9 (±0.3) km of cutting with mandibles was required to reduce a square metre of leaf to fungal substrate. Only about 12% (±1%) of this cutting took place outside of the nest. The cutting density and energy cost is lower for leaf material with higher ratios of perimeter to area, so we tested for, and found that the laboratory ants had a preference for leaves that were pre-cut into smaller pieces. Estimates suggest that the energy required to transport and cut up the leaf material is comparable to the metabolic energy available from the fungus grown on the leaves, and so conservation of energy is likely to be a particularly strong selective pressure for leafcutter ants.

  2. Hypoxia and inactivity related physiological changes precede or take place in absence of significant rearrangements in bacterial community structure: The PlanHab randomized trial pilot study.

    Directory of Open Access Journals (Sweden)

    Robert Šket

    Full Text Available We explored the assembly of intestinal microbiota in healthy male participants during the randomized crossover design of run-in (5 day and experimental phases (21-day normoxic bed rest (NBR, hypoxic bed rest (HBR and hypoxic ambulation (HAmb in a strictly controlled laboratory environment, with balanced fluid and dietary intakes, controlled circadian rhythm, microbial ambiental burden and 24/7 medical surveillance. The fraction of inspired O2 (FiO2 and partial pressure of inspired O2 (PiO2 were 0.209 and 133.1 ± 0.3 mmHg for NBR and 0.141 ± 0.004 and 90.0 ± 0.4 mmHg for both hypoxic variants (HBR and HAmb; ~4000 m simulated altitude, respectively. A number of parameters linked to intestinal environment such as defecation frequency, intestinal electrical conductivity (IEC, sterol and polyphenol content and diversity, indole, aromaticity and spectral characteristics of dissolved organic matter (DOM were measured (64 variables. The structure and diversity of bacterial microbial community was assessed using 16S rRNA amplicon sequencing. Inactivity negatively affected frequency of defecation and in combination with hypoxia increased IEC (p < 0.05. In contrast, sterol and polyphenol diversity and content, various characteristics of DOM and aromatic compounds, the structure and diversity of bacterial microbial community were not significantly affected over time. A new in-house PlanHab database was established to integrate all measured variables on host physiology, diet, experiment, immune and metabolic markers (n = 231. The observed progressive decrease in defecation frequency and concomitant increase in IEC suggested that the transition from healthy physiological state towards the developed symptoms of low magnitude obesity-related syndromes was dose dependent on the extent of time spent in inactivity and preceded or took place in absence of significant rearrangements in bacterial microbial community. Species B. thetaiotamicron, B. fragilis, B

  3. Designated Places

    Data.gov (United States)

    California Natural Resource Agency — Census 2000 Place Names provides a seamless statewide GIS layer of places, including census designated places (CDP), consolidated cities, and incorporated places,...

  4. Solvent substitutes

    International Nuclear Information System (INIS)

    Evanoff, S.P.

    1995-01-01

    The environmental and industrial hygiene regulations promulgated since 1980, most notably the Superfund Amendments and Reauthorization Act (SARA), the Hazardous and Solid Waste Amendments to the Resources Conservation and Recovery Act (RCRA), and the Clean Air Act Amendments of 1990, have brought about an increased emphasis on user exposure, hazardous waste generation, and air emissions. As a result, industry is performing a fundamental reassessment of cleaning solvents, processes, and procedures. The more progressive organizations have made their goal the elimination of solvents that may pose significant potential human health and environmental hazards. This chapter discusses solvent cleaning in metal-finishing, metal-manufacturing, and industrial maintenance applications; precision cleaning; and electronics manufacturing. Nonmetallic cleaning, adhesives, coatings, inks, and aerosols also will be addressed, but in a more cursory manner

  5. Density Changes in the Optimized CSSX Solvent System

    Energy Technology Data Exchange (ETDEWEB)

    Lee, D.D.

    2002-11-25

    Density increases in caustic-side solvent extraction (CSSX) solvent have been observed in separate experimental programs performed by different groups of researchers. Such changes indicate a change in chemical composition. Increased density adversely affects separation of solvent from denser aqueous solutions present in the CSSX process. Identification and control of factors affecting solvent density are essential for design and operation of the centrifugal contactors. The goals of this research were to identify the factors affecting solvent density (composition) and to develop correlations between easily measured solvent properties (density and viscosity) and the chemical composition of the solvent, which will permit real-time determination and adjustment of the solvent composition. In evaporation experiments, virgin solvent was subjected to evaporation under quiescent conditions at 25, 35, and 45 C with continuously flowing dry air passing over the surface of the solvent. Density and viscosity were measured periodically, and chemical analysis was performed on the solvent samples. Chemical interaction tests were completed to determine if any chemical reaction takes place over extended contact time that changes the composition and/or physical properties. Solvent and simulant, solvent and strip solution, and solvent and wash solution were contacted continuously in agitated flasks. They were periodically sampled and the density measured (viscosity was also measured on some samples) and then submitted to the Chemical Sciences Division of Oak Ridge National Laboratory for analysis by nuclear magnetic resonance (NMR) spectrometry and high-performance liquid chromatography (HPLC) using the virgin solvent as the baseline. Chemical interaction tests showed that solvent densities and viscosities did not change appreciably during contact with simulant, strip, or wash solution. No effects on density and viscosity and no chemical changes in the solvent were noted within

  6. Major growth in coke production takes place

    International Nuclear Information System (INIS)

    Swain, E.J.

    1991-01-01

    U.S. petroleum coke production has increased 64% during the 10-year period from 1980 to 1990. This dramatic rise makes it timely to discuss the history and future of U.S. coking capacity, production, and processing. The article covers the properties and uses of the various grades of petroleum coke, as well as pricing and market trends

  7. Solvent annealing induced phase separation and dewetting in PMMA∕SAN blend film: film thickness and solvent dependence.

    Science.gov (United States)

    You, Jichun; Zhang, Shuangshuang; Huang, Gang; Shi, Tongfei; Li, Yongjin

    2013-06-28

    The competition between "dewetting" and "phase separation" behaviors in polymer blend films attracts significant attention in the last decade. The simultaneous phase separation and dewetting in PMMA∕SAN [poly(methyl methacrylate) and poly(styrene-ran-acrylonitrile)] blend ultrathin films upon solvent annealing have been observed for the first time in our previous work. In this work, film thickness and annealing solvent dependence of phase behaviors in this system has been investigated using atomic force microscopy and grazing incidence small-angle X-ray scattering (GISAXS). On one hand, both vertical phase separation and dewetting take place upon selective solvent vapor annealing, leading to the formation of droplet∕mimic-film structures with various sizes (depending on original film thickness). On the other hand, the whole blend film dewets the substrate and produces dispersed droplets on the silicon oxide upon common solvent annealing. GISAXS results demonstrate the phase separation in the big dewetted droplets resulted from the thicker film (39.8 nm). In contrast, no period structure is detected in small droplets from the thinner film (5.1 nm and 9.7 nm). This investigation indicates that dewetting and phase separation in PMMA∕SAN blend film upon solvent annealing depend crucially on the film thickness and the atmosphere during annealing.

  8. Solvent consumption in non-catalytic alcohol solvolysis of biorefinery lignin

    DEFF Research Database (Denmark)

    Nielsen, J. B.; Jensen, A.; Schandel, Christian Bækhøj

    2017-01-01

    Lignin solvolysis in supercritical alcohols provides a method for producing a deoxygenated liquid bio-oil. Solvent consumption is however inevitable and due to the high cost of alcohols, relative to a bio-oil product, it can hinder commercial viability. In order to investigate the reactions...... of solvent consumption we studied solvolysis of biorefinery lignin in several primary alcohols. Lignin solvolysis in methanol, ethanol, 1-propanol and 1-butanol performed similarly with respect to bio-oil composition; however, methanol gave much lower bio-oil yield. Solvent consumption increases...... with reaction temperature for all alcohols and from 10 wt% at 300 °C to 35 wt% at 400 °C when using ethanol. The mechanism for solvent consumption was found mainly to take place through three different reactions: direct decomposition to gas through decarbonylation, formation of light condensation products...

  9. Connecting people to place

    NARCIS (Netherlands)

    Horlings, L.G.

    2016-01-01

    The article describes a process of preparing a research design on place-shaping, as outcome of a process of co-design between academic actors and non-academic actors in Brazil, South Africa and The Netherlands, taking place in the context of the project TRANSPLACE. The joint research design

  10. Children's Places

    DEFF Research Database (Denmark)

    Using a cross-cultural approach the book investigates children's places in different societies. "Children's Places" examines the ways in which children and adults, from their different vantage-points in society, negotiate proper places of children in both social and spatial terms. It looks at some...

  11. Women take the island: nation, profession, place Women take the island: nation, profession, place

    Directory of Open Access Journals (Sweden)

    Ruth Morse

    2008-04-01

    Full Text Available The Tempest has been one of Shakespeare’s most adapted plays. Its stage history is concomitantly a history of the British theatre, from regularized comedy to semi-opera to pantomime to opera. It has had other lives, too, from its position in romantic ideas of Shakespeare’s biography and his so-called farewell to the stage, to a supporting role as witness for the nineteenth-century Darwinians’ idea of the missing link, to a veritable efflorescence of walk-on parts, cameos, and star vehicles in twentieth-century psychoanalytic and social arguments about European expansion.2 The play has given us individual poems and paintings, not to speak of screen-plays for several film adaptations. The Tempest has been one of Shakespeare’s most adapted plays. Its stage history is concomitantly a history of the British theatre, from regularized comedy to semi-opera to pantomime to opera. It has had other lives, too, from its position in romantic ideas of Shakespeare’s biography and his so-called farewell to the stage, to a supporting role as witness for the nineteenth-century Darwinians’ idea of the missing link, to a veritable efflorescence of walk-on parts, cameos, and star vehicles in twentieth-century psychoanalytic and social arguments about European expansion.2 The play has given us individual poems and paintings, not to speak of screen-plays for several film adaptations.

  12. Place Branding

    DEFF Research Database (Denmark)

    Medway, Dominic; Swanson, Kathryn; Neirotti, Lisa Delpy

    2015-01-01

    Purpose: – The purpose of this paper is to report on a special session entitled “Place branding: Are we wasting our time?”, held at the American Marketing Association’s Summer Marketing Educators’ conference in 2014. Design/methodology/approach: – The report details the outcome of an Oxford......: – The outcome of the debate points towards a need for place brands to develop as more inclusive and organic entities, in which case it may be best for place practitioners to avoid creating and imposing a place brand and instead help shape it from the views of stakeholder constituencies. This shifts the notion...... of place branding towards an activity centred on “curation”. Originality/value: – The use of a competitive debating format as a means for exploring academic ideas and concepts in the place management field....

  13. Solvent/Non-Solvent Sintering To Make Microsphere Scaffolds

    Science.gov (United States)

    Laurencin, Cato T.; Brown, Justin L.; Nair, Lakshmi

    2011-01-01

    A solvent/non-solvent sintering technique has been devised for joining polymeric microspheres to make porous matrices for use as drug-delivery devices or scaffolds that could be seeded with cells for growing tissues. Unlike traditional sintering at elevated temperature and pressure, this technique is practiced at room temperature and pressure and, therefore, does not cause thermal degradation of any drug, protein, or other biochemical with which the microspheres might be loaded to impart properties desired in a specific application. Also, properties of scaffolds made by this technique are more reproducible than are properties of comparable scaffolds made by traditional sintering. The technique involves the use of two miscible organic liquids: one that is and one that is not a solvent for the affected polymer. The polymeric microspheres are placed in a mold having the size and shape of the desired scaffold, then the solvent/non-solvent mixture is poured into the mold to fill the void volume between the microspheres, then the liquid mixture is allowed to evaporate. Some of the properties of the resulting scaffold can be tailored through choice of the proportions of the liquids and the diameter of the microspheres.

  14. Calculation of 125Te NMR Chemical Shifts at the Full Four-Component Relativistic Level with Taking into Account Solvent and Vibrational Corrections: A Gateway to Better Agreement with Experiment.

    Science.gov (United States)

    Rusakova, Irina L; Rusakov, Yuriy Yu; Krivdin, Leonid B

    2017-06-29

    Four-component relativistic calculations of 125 Te NMR chemical shifts were performed in the series of 13 organotellurium compounds, potential precursors of the biologically active species, at the density functional theory level under the nonrelativistic and four-component fully relativistic conditions using locally dense basis set scheme derived from relativistic Dyall's basis sets. The relativistic effects in tellurium chemical shifts were found to be of as much as 20-25% of the total calculated values. The vibrational and solvent corrections to 125 Te NMR chemical shifts are about, accordingly, 6 and 8% of their total values. The PBE0 exchange-correlation functional turned out to give the best agreement of calculated tellurium shifts with their experimental values giving the mean absolute percentage error of 4% in the range of ∼1000 ppm, provided all corrections are taken into account.

  15. Better Place

    DEFF Research Database (Denmark)

    Rask, Morten; Bakke, Nikolas; Lindhøj, Jan

    Better Place is trying to reshape the automotive industry by shifting transportation from a dependency on oil to a reliance on environmentally friendly renewable energy. Better Place is developing an extensive infrastructure system that will utilise overcapacity in the production of wind power...... among others and that will drive the global transportation industry to becoming driven by electric vehicles (EVs). Better Place does this by selling its customers 'mileage' and a car without a battery. The case highlights the internationalisation process of Better Place from an international business...... perspective in order to encourage a discussion and debate about how Better Place can make their grand vision a reality in the future by overcoming the obstacles that historically have been challenging the rise of the EV industry. The case includes a historical background of the EV industry by using Denmark...

  16. Part I: the effect of long-term exposure to organic solvents on memory: a cross sectional study.

    Science.gov (United States)

    Ratzon, N Z; Vakil, E; Derazne, E; Sculsky, M

    1998-01-01

    This study focuses on a wide range of different aspects of memory functions trying to ascertain a possible profile of memory changes, which take place following long-term exposure to organic solvents. The research design was cross-sectional. Study population included 31 industrial painters who were exposed at work to organic solvents and 31 unexposed workers. Workers after long-term exposure to organic solvents showed significant decline in memory as indicated in all three standard memory tests (i.e. Wechsler Memory Scale - Revised, Benton Revised Visual Retention Test, and Rey Auditory Verbal Learning Test). The results of Rey Auditory Verbal Learning Test showed a negative correlation with exposure index indicating that the more intensive and longer the time of exposure was, the more impaired is the verbal memory. It was also found that the affect of age on memory was stronger among workers after long-term exposure to organic solvents compared to the unexposed workers.

  17. Distribution of radioisotopes between some solvents and filter papers, 1- principle of the method and a study on Sb(V) isotopes. Vol. 3

    International Nuclear Information System (INIS)

    Zakareia, N.; Nofal, M.; El-Sweify, F.; Alian, A.

    1996-01-01

    A procedure was described for the separation of thorium-234 (UX1) from uranyl nitrate by dissolving the latter in diethyl ether and placing the solution in a beaker containing filter paper at its bottom. UX1 was almost completely absorbed on the filter paper and could be eluted therefrom by a dilute acid solution. This idea was generalized to involve other isotopes and solvents. In the present work, a study is conducted on the distribution of the radioisotopes of antimony ( 122 Sb and 1 24 Sb) in the trivalent and pentavalent states between nonpolar solvents (benzene, toluene, xylene, chloroform or carbon tetrachloride), and filter papers. Antimony in each oxidation state was first extracted as antimony chloride (Sb Cl 3 or Sb Cl 5 ) from a strong sulphuric acid solution by any of the above mentioned solvents. Two equal aliquots (20 M1) of each loaded solvent were then placed in two similar beakers, one of them having at its bottom a filter paper of the same inner diameter of the beaker. Adsorption of antimony was followed by measuring 1 m1 portions of the two solvent solutions at various intervals of time. It has been found from the activity of the solvent solution-time that appreciable adsorption on the filter paper takes place within few hours. The adsorption rate varies with the solvent. The results are discussed in the light of known theories of adsorption; and also the possibility of separation of the two oxidation states of antimony. 6 figs

  18. Healthy Places

    Centers for Disease Control (CDC) Podcasts

    Every person has a stake in environmental public health. As the environment deteriorates, so does the physical and mental health of the people within it. Healthy places are those designed and built to improve the quality of life for all people who live, work, worship, learn, and play within their borders -- where every person is free to make choices amid a variety of healthy, available, accessible, and affordable options. The CDC recognizes significant health issues and places that are vital in developing the Healthy Places program and provides examples in this report.

  19. Place (National)

    Data.gov (United States)

    Department of Transportation — This map layer includes cities and towns in the United States, Puerto Rico, and the U.S. Virgin Islands (NTAD). A city or town is a place with a recorded population,...

  20. Co-solvent effects on reaction rate and reaction equilibrium of an enzymatic peptide hydrolysis.

    Science.gov (United States)

    Wangler, A; Canales, R; Held, C; Luong, T Q; Winter, R; Zaitsau, D H; Verevkin, S P; Sadowski, G

    2018-04-25

    This work presents an approach that expresses the Michaelis constant KaM and the equilibrium constant Kth of an enzymatic peptide hydrolysis based on thermodynamic activities instead of concentrations. This provides KaM and Kth values that are independent of any co-solvent. To this end, the hydrolysis reaction of N-succinyl-l-phenylalanine-p-nitroanilide catalysed by the enzyme α-chymotrypsin was studied in pure buffer and in the presence of the co-solvents dimethyl sulfoxide, trimethylamine-N-oxide, urea, and two salts. A strong influence of the co-solvents on the measured Michaelis constant (KM) and equilibrium constant (Kx) was observed, which was found to be caused by molecular interactions expressed as activity coefficients. Substrate and product activity coefficients were used to calculate the activity-based values KaM and Kth for the co-solvent free reaction. Based on these constants, the co-solvent effect on KM and Kx was predicted in almost quantitative agreement with the experimental data. The approach presented here does not only reveal the importance of understanding the thermodynamic non-ideality of reactions taking place in biological solutions and in many technological applications, it also provides a framework for interpreting and quantifying the multifaceted co-solvent effects on enzyme-catalysed reactions that are known and have been observed experimentally for a long time.

  1. Solvent-mediated pathways to gelation and phase separation in suspensions of grafted nanoparticles

    KAUST Repository

    Anyfantakis, Manos

    2009-01-01

    We explore the role of the solvent medium on the interplay between gelation and phase separation in suspensions of organosilicate planar hybrids grafted with hydrocarbon chains. We establish their phase diagram by means of dynamic light scattering, rheology and visual observations, and different routes to gelation, depending on the solvent used. In agreement with earlier works, the solvent quality for the grafted chains at a given temperature controls the balance between attractions and repulsions, and hence the phase diagram of the nanoparticles and their tendency to gel. Here we show how to tune the suspension state and hence its rheology. For decane, a good solvent for the hydrocarbon chains, gelation occurs at rather low volume fractions in the presence of phase separation. This is due to the interdigitation of solvent molecules with the grafted chains, resulting in their crystalline packing that promotes the attraction between particles. For toluene, a solvent of reduced quality for the hydrocarbon chains, no interdigitation takes place, and hence gelation is triggered by clustering at higher volume fractions before phase separation. Our results support the generic picture of complex kinetic arrest/phase separation interplay in soft matter, where phase separation can proceed, be interrupted or be completely inhibited. A number of interesting possibilities for tailoring the rheology of grafted colloidal systems emerge. © 2009 The Royal Society of Chemistry.

  2. Taking antacids

    Science.gov (United States)

    Heartburn - antacids; Reflux - antacids; GERD - antacids ... Antacids are a good treatment for heartburn that occurs once in a while. Take antacids about 1 hour after eating or when you have heartburn. If you are taking ...

  3. Solvents and solvent effects in organic chemistry

    National Research Council Canada - National Science Library

    Reichardt, C; Welton, T

    2011-01-01

    .../guest complexation equilibria and reactions in biphasic solvent systems and neoteric solvents, respectively. More than 900 new references have been added, giving preference to review articles, and many older ones have been deleted. New references either replace older ones or are added to the end of the respective reference list of each chapter. Th...

  4. Organic Solvent Tropical Report

    International Nuclear Information System (INIS)

    COWLEY, W.L.

    2000-01-01

    This report provides the basis for closing the organic solvent safety issue. Sufficient information is presented to conclude that risk posed by an unmitigated organic solvent fire is within risk evaluation guidelines

  5. Canyon solvent cleaning

    International Nuclear Information System (INIS)

    Reif, D.J.

    1986-01-01

    The HM Process at the Savannah River Plant (SRP) uses 7.5% tributylphosphate in n-paraffin as an extraction solvent. During use, the solvent is altered due to hydrolysis and radiolysis, forming materials that influence product losses, produce decontamination, and separation efficiencies. Laboratory studies to improve online solvent cleaning have shown the carbonate washing, although removing residual solvent activity does not remove binding ligands that hold fission products in the solvent. Treatment of solvent by an alumina adsorption process removes binding ligands and significantly improves recycle solvent performance. Both laboratory work defining a full-scale alumina adsorption process and the use of the process to clean HM Process first cycle solvent are presented

  6. Solvent wash solution

    International Nuclear Information System (INIS)

    Neace, J.C.

    1986-01-01

    This patent describes a process for removing diluent degradation products from a solvent extraction solution comprising an admixture of an organic extractant for uranium and plutonium and a non-polar organic liquid diluent, which has been used to recover uranium and plutonium from spent nuclear fuel. Comprising combining a wash solution consisting of: (a) water; and (b) a positive amount up to about, an including, 50 volume percent of at least one highly-polar water-miscible organic solvent, based on the total volume of the water and the highly-polar organic solvent, with the solvent extraction solution after uranium and plutonium values have been stripped from the solvent extraction solution, the diluent degradation products dissolving in the highly-polar organic solvent and the extractant and diluent of the extraction solution not dissolving in the highly-polar organic solvent, and separating the highly-polar organic solvent and the extraction solution to obtain a purified extraction solution

  7. Healthy Places

    Centers for Disease Control (CDC) Podcasts

    2007-04-10

    Every person has a stake in environmental public health. As the environment deteriorates, so does the physical and mental health of the people within it. Healthy places are those designed and built to improve the quality of life for all people who live, work, worship, learn, and play within their borders -- where every person is free to make choices amid a variety of healthy, available, accessible, and affordable options. The CDC recognizes significant health issues and places that are vital in developing the Healthy Places program and provides examples in this report.  Created: 4/10/2007 by CDC National Center for Environmental Health.   Date Released: 4/13/2007.

  8. Designed Places

    DEFF Research Database (Denmark)

    Stender, Marie

    The 2008 financial crisis has left traces in the built environment of Copenhagen like many other places: Building projects are left unfinished or their function or finish is changed due to new economic circumstances. An ethnographic exploration of these traces exposes central aspects of what is a......, and when the ceilings leak water, the residents suspect it to be a consequence of the crisis. The paper discusses how market forces interact with the material surroundings we inhabit and explores the relationship between controlled and uncontrollable in the design of places....

  9. Secret Places.

    Science.gov (United States)

    Ridolfi, Kerry

    1997-01-01

    Argues that children are as deep as the ocean, with secret places inside of them waiting to be opened. Notes that it is powerful for students to learn they can make sense of the world through words, and describes inviting them into poetry as they read poetry, create poetry packets, and write and revise poems. (SR)

  10. Envisioning place

    DEFF Research Database (Denmark)

    Schmidt, Garbi; Glick Schiller, Nina

    2016-01-01

    together, the articles contribute to an emerging relational social science by approaching urban sociabilities through four interrelated parameters: (1) a concept of place-making situated within trajectories of differential and multiscalar power; (2) a discursive analysis of narratives and silences...

  11. Excited-state dynamics of mononucleotides and DNA strands in a deep eutectic solvent.

    Science.gov (United States)

    Zhang, Yuyuan; de La Harpe, Kimberly; Hariharan, Mahesh; Kohler, Bern

    2018-04-17

    The photophysics of several mono- and oligonucleotides were investigated in a deep eutectic solvent for the first time. The solvent glyceline, prepared as a 1 : 2 mole ratio mixture of choline chloride and glycerol, was used to study excited-state deactivation in a non-aqueous solvent by the use of steady-state and time-resolved spectroscopy. DNA strands in glyceline retain the secondary structures that are present in aqueous solution to some degree, thus enabling a study of the effects of solvent properties on the excited states of stacked bases and stacked base pairs. The excited-state lifetime of the mononucleotide 5'-AMP in glyceline is 630 fs, or twice as long as in aqueous solution. Even slower relaxation is seen for 5'-TMP in glyceline, and a possible triplet state with a lifetime greater than 3 ns is observed. Circular dichroism spectra show that the single strand (dA)18 and the duplex d(AT)9·d(AT)9 adopt similar structures in glyceline and in aqueous solution. Despite having similar conformations in both solvents, femtosecond transient absorption experiments reveal striking changes in the dynamics. Excited-state decay and vibrational cooling generally take place more slowly in glyceline than in water. Additionally, the fraction of long-lived excited states in both oligonucleotide systems is lower in glyceline than in aqueous solution. For a DNA duplex, water is suggested to favor decay pathways involving intrastrand charge separation, while the deep eutectic solvent favors interstrand deactivation channels involving neutral species. Slower solvation dynamics in the viscous deep eutectic solvent may also play a role. These results demonstrate that the dynamics of excitations in stacked bases and stacked base pairs depend not only on conformation, but are also highly sensitive to the solvent.

  12. Places Connected:

    DEFF Research Database (Denmark)

    Hansen, Annette Skovsted

    This paper argues that development assistance contributed to the globalization of the 20th century by financing truly global networks of people. By focusing on the networks financed by development assistance bound by the national histories of Denmark and Japan, I illustrate how the people who...... experiences of place, however, when it is often the same people who experience many different places? Along with many other so-called donors in the 1950s, Denmark and Japan chose to invest in the education of own and other nationals involved in development and thereby financed personal connections between...... individuals throughout the world. Development assistance , where there are two or three links only between a Bangladeshi farmer, a street child in Sao Paolo and the President of the United States, the Queen of Denmark, or a suburban house wife in Japan, who has never left the Osaka area, but mothered a United...

  13. Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) C++ for Particle Physicists : 17 – 21.11.03 (6 X 3-hour lectures) Programmation automate Schneider TSX Premium – niveau 2 : 18 – 21.11.03 (4 jours) JAVA 2 Enterprise Edition – Part 1 : WEB Applications : 20 & ...

  14. Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Places available The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses : Introduction à Outlook : 19.8.2004 (1 journée) Outlook (short course I) : E-mail : 31.8.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes : 31.8.2004 (2 hours, afternoon) Instructor-led WBTechT Study or Follow-up for Microsoft Applications : 7.9.2004 (morning) Outlook (short course III) : Meetings and Delegation : 7.9.2004 (2 hours, afternoon) Introduction ...

  15. Places disponibles*/Places available **

    CERN Multimedia

    2003-01-01

    Des places sont disponibles dans les cours suivants : Places are available in the following course : Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 20 - 22.1.03 (3 days) Introduction to PVSS : 27.1.03 (Afternoon) free course but registration necessary Basic PVSS : 28 - 30.1.03 (3 days) MAGNE-03 - Magnétisme pour l'électrotechnique : 28 - 30.1.03 (3 jours) MAGNE-03 - Magnetism for Technical Electronics : 11 - 13.2.03 (3 days) AutoCAD 2002 - niveau 1 : 24, 25.2 et 3, 4.3.03 (4 jours) AutoCAD 2002 - niveau 2 : 10 & 11.3.03 (2 jours) C++ for Particle Physicists : 10 - 14.3.03 (6 X 3 hour lectures) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 17, 18, 24 & 25.3.03 (6 jours) * Etant donné le délai d'impression du Bulletin, ces places peuvent ne plus être disponibles au moment de sa parution. Veuillez consulter notre site Web pour avoir la dernière mise à jour. ** The number of places available may vary. Please check our Web site to find out the current availability. Si vous désirez ...

  16. Structural transition of a homopolymer in solvents mixture

    Energy Technology Data Exchange (ETDEWEB)

    Guettari, Moez [Laboratoire de Physique de la Matiere Molle, Faculte des Sciences de Tunis, Campus Universitaire, 2092 Tunisia (Tunisia)], E-mail: gtarimoez@yahoo.fr; Aschi, Adel; Gomati, Riadh; Gharbi, Abdelhafidh [Laboratoire de Physique de la Matiere Molle, Faculte des Sciences de Tunis, Campus Universitaire, 2092 Tunisia (Tunisia)

    2008-07-01

    The present work is aimed at studying the thermodynamic behaviour of a polymer in solvents mixture. Dynamic light scattering is used to measure the hydrodynamic radius of polyvinylpyrrolidone (M{sub w} = 360,000 g/mol), in water/methanol solvents mixture, versus the mixed solvents composition at 25 deg. C. Then, we show that the polymer conformation adopts the Coil-Globule-Coil structure when the methanol molar fraction X{sub A} is varied. This transition is attributed to solvent quality change which result from water and methanol complex formation. The polymer contraction rate calculated for each composition takes its maximum value at X{sub A} = 0.17. Hildebrand theory assuming the solvents mixture as an equivalent solvent was used to analyze the change in mixed solvents quality. These changes can be attributed to dispersive forces in solvents mixture.

  17. Structural transition of a homopolymer in solvents mixture

    International Nuclear Information System (INIS)

    Guettari, Moez; Aschi, Adel; Gomati, Riadh; Gharbi, Abdelhafidh

    2008-01-01

    The present work is aimed at studying the thermodynamic behaviour of a polymer in solvents mixture. Dynamic light scattering is used to measure the hydrodynamic radius of polyvinylpyrrolidone (M w = 360,000 g/mol), in water/methanol solvents mixture, versus the mixed solvents composition at 25 deg. C. Then, we show that the polymer conformation adopts the Coil-Globule-Coil structure when the methanol molar fraction X A is varied. This transition is attributed to solvent quality change which result from water and methanol complex formation. The polymer contraction rate calculated for each composition takes its maximum value at X A = 0.17. Hildebrand theory assuming the solvents mixture as an equivalent solvent was used to analyze the change in mixed solvents quality. These changes can be attributed to dispersive forces in solvents mixture

  18. A radiochemical technique for the establishment of a solvent-independent scale of ion activities in amphiprotic solvents

    International Nuclear Information System (INIS)

    Kim, J.I.; Duschner, H.; Born, H.J.

    1975-01-01

    The radiochemical determination of solubilities of hardly soluble compounds of silver (Ph 4 BAg, AgCl), by means of Ag-110m in amphiprotic solutions is used for setting-up a solvent-independent scale of ion activities based on the concept of the media effect. The media effects of the salts are calculated from the solubility data of the Ag compounds in question. The splitting into the media effects of single ions takes place with the extrathermodynamic assumption of the same media effects for large ions, such as Ph 4 B - = Ph 4 As - . A standardized ion activity scale in connection with the activity coefficients for the solvent in question can be established with water as the basic state of the chemical potential. As the sum of the media effects of the single ions gives the media effect of the salt concerned, which is easily obtained from data which are experimentally accessible (solubility, vapour pressure, ion exchange ect.), this method leads to single ion activities of a large number of ions in a multitude of solvents. (orig./LH) [de

  19. Taking Stock.

    Science.gov (United States)

    Merriam, Sharan B.

    1993-01-01

    A complete theory of adult learning must take into consideration the learner, learning process, and context. Andragogy, self-directed learning, consciousness, critical theory, feminism, transformational learning, and situated cognition contribute to understanding of this complex phenomenon. (SK)

  20. Planned place of birth

    DEFF Research Database (Denmark)

    Overgaard, Charlotte; Coxon, Kirstie; Stewart, Mary

    Title Planned place of birth: issues of choice, access and equity. Outline In Northern European countries, giving birth is generally safe for healthy women with uncomplicated pregnancies, and their babies. However, place of birth can affect women’s outcomes and experiences of birth. Whilst tertiary...... countries, maternity care is provided free to women, through public financing of health care; universal access to care is therefore secured. Nevertheless, different models of care exist, and debates about the appropriateness of providing maternity care in different settings take place in both countries...... in Denmark Coxon K et al: Planned place of birth in England: perceptions of accessing obstetric units, midwife led units and home birth amongst women and their partners. How these papers interrelate These papers draw upon recent research in maternity care, undertaken in Denmark and in England. In both...

  1. Places available**

    CERN Multimedia

    Places are available in the following courses: Hands-on Introduction to Python Programming: 11-13.08.2003 (3 days) Introduction to the CERN Engineering Data Management System (EDMS): 26.08.2003 (1 day) The CERN Engineering Data Management System (EDMS) for Engineers: 27.08.2003 (1 day) CLEAN-2002 : Travailler en salle blanche : 4.09.2003 (une demi-journée) AutoCAD 2002 - Level 1: 4, 5, 15, 16.09.2003 (2 x 2 days) AutoCAD Mechanical 6 PowerPack : 17, 18, 25, 26.09.2003 et 2, 3.10.2003 (3 x 2 journées, français) AutoCAD 2002 - niveau 1 : 23, 24, 30.09.2003 et 1.10.2003 (2 x 2 journées) Introduction to the CERN Engineering Data Management System (EDMS): 23.09.2003 (1 day) The CERN Engineering Data Management System (EDMS) for Local Administrators: 24-25.09.2003 (2 days) AutoCAD 2002 - niveau 2 : 8 et 10.10.2003 (2 journées) CLEAN-2002: Working in a Cleanroom: 23.10.2003 (half day, p.m.) ** The number of places available may vary. Please check our Web site to find out the current availabili...

  2. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses: Hands-on Introduction to Python Programming: 11-13.08.2003(3 days) Introduction to the CERN Engineering Data Management System (EDMS): 26.08.2003 (1 day) The CERN Engineering Data Management System (EDMS) for Engineers: 27.08.2003 (1 day) CLEAN-2002 : Travailler en salle blanche : 4.09.2003 (une demi-journée) AutoCAD 2002 - Level 1: 4, 5, 15, 16.09.2003 (2 x 2 days) AutoCAD Mechanical 6 PowerPack : 17, 18, 25, 26.09.2003 et 2, 3.10.2003 (3 x 2 journées, français) AutoCAD 2002 - niveau 1 : 23, 24, 30.09.2003 et 1.10.2003 (2 x 2 journées) Introduction to the CERN Engineering Data Management System (EDMS): 23.09.2003 (1 day) The CERN Engineering Data Management System (EDMS) for Local Administrators: 24-25.09.2003 (2 days) AutoCAD 2002 - niveau 2 : 8 et 10.10.2003 (2 journées) CLEAN-2002: Working in a Cleanroom: 23.10.2003 (half day, p.m.) ** The number of places available may vary. Please ch...

  3. Media places

    DEFF Research Database (Denmark)

    Linde, Per; Messeter, Jörn

    The impact that ubiquitous wireless network technologies and mobile phones have on our experience of the modern cityscape, has been a driving force in many research projects in recent years. The agendas differ in relation to perspectives, but it seems safe to claim that such technologies are no l......The impact that ubiquitous wireless network technologies and mobile phones have on our experience of the modern cityscape, has been a driving force in many research projects in recent years. The agendas differ in relation to perspectives, but it seems safe to claim that such technologies...... construction of place in the urban setting. The concept of Hertzian space, put forth by Anthony Dunne and others (Dunne, 1999) also carries a dimension of how spaces of wireless communication may be problematized, and how we can criticize cultural phenomena taken for granted through innovative technology. From...... this perspective wireless technology can also be a way of temporarily appropriating places within the city space for a variety of different groups, at times questioning hierarchical structures of ownership of public spaces. These spaces can be said to be hybrid spaces, bringing forth the fundamental question...

  4. Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval Tel. 74924technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: MATLAB Fundamentals and Programming Techniques (ML01) : 2 & 3.12.03 (2 days) Oracle 8i : SQL : 3 - 5.12.03 (3 days) The EDMS MTF in practice : 5.12.03 (afternoon, free of charge) Modeling Dynamic Systems with Simulink (SL01) : 8 & 9.12.03 (2 days) Signal Processing with MATLAB (SG01) : 11 & 12.12.03 (2 days) The JAVA Programming Language - l...

  5. Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: MATLAB Fundamentals and Programming Techniques (ML01) :2 & 3.12.03 (2 days) Oracle 8i : SQL : 3 - 5.12.03 (3 days) The EDMS MTF in practice : 5.12.03 (afternoon, free of charge) Modeling Dynamic Systems with Simulink (SL01) : 8 & 9.12.03 (2 days) Signal Processing with MATLAB (SG01) : 11 & ...

  6. Places available**

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt.TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 : 9 & 10.1.2004 (2 days) The JAVA Programming Language Level 2 : 11 to 13.1.2004 (3 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions) LabVIEW Basics 1 : 22 - 24.3.20...

  7. Places available**

    CERN Document Server

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 :9 & 10.1.2004 (2 days) The JAVA Programming Language Level 2 : 11 to 13.1.2004 (3 days) Hands-on Introduction to Python Programming : 16 - 18.2.2004 (3 days - free of charge) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004...

  8. Places available**

    CERN Document Server

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval Tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: JAVA 2 Enterprise Edition - Part 1 : WEB Applications : 20 & 21.11.03(2 days) FrontPage 2000 - niveau 1 : 20 & 21.11.03 (2 jours) Oracle 8i : SQL : 3 - 5.12.03 (3 days) Oracle 8i : Programming with PL/SQL : 8 - 10.12.03 (3 days) The JAVA Programming Language - leve...

  9. Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Project Planning with MS-Project : 15 & 22.1.2004 (2 days) Joint PVSS JCOP Framework Course : 2 sessions : 2 - 6.2.2004 and 16 - 20-2-2004 (5 days) Hands-on Introduction to Python Programming : 16 - 18.2.2004 (3 days - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions)

  10. Places available **

    CERN Multimedia

    2003-01-01

    Des places sont disponibles dans les cours suivants : Places are available in the following courses : WorldFIP 2003 pour utilisateurs : 11-14.2.03 (4 jours) DISP-2003 ? Spring I Term : Introduction to Digital Signal Processing : 20, 27.2, 6, 13, 20, 27.3, 3.4.03 (7 X 2-hour lectures) AXEL-2003 - Introduction to Accelerators : 24-28.2.03 (10 X 1-hour lectures) AutoCAD 2002 - niveau 1 : 24, 25.2 & 3, 4.3.03 (4 jours) Introduction à Windows 2000 au CERN : 25.2.03 (1/2 journée) LabView base 2/LabView Basics 2 : 10 & 11.3.03 (2 jours/2 days) langue à définir/Language to be decided C++ for Particle Physicists : 10 ? 14.3.03 (6 X 3-hour lectures) Introduction to PVSS : 10.3.03 (half day, afternoon) Basic PVSS : 11 - 13.3.03 (3 days) LabView avancé /LabView Advanced : 12 - 14.3.03 (3 jours/3days) Langue à définir/language to be decided AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 17, 18, 24 & 25.3.03 (6 jours) PVSS - JCOP Framework Tutorial : 14.3.03 (1 day) MAGNE-03 - Magnetism for Technical Ele...

  11. Places available **

    CERN Multimedia

    2003-01-01

    Des places sont disponibles dans les cours suivants : Places are available in the following courses : Introduction à Windows 2000 au CERN : 25.2.03 (1/2 journée) LabView base 2/LabView Basics 2 : 10 & 11.3.03 (2 jours/2 days) langue à définir/Language to be decided C++ for Particle Physicists : 10 - 14.3.03 (6 X 3-hour lectures) Introduction to PVSS : 10.3.03 (half day, afternoon) Basic PVSS : 11 - 13.3.03 (3 days) LabView avancé /LabView Advanced : 12 - 14.3.03 (3 jours/3days) Langue à définir/Language to be decided AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 17, 18, 24 & 25.3.03 (6 jours) PVSS - JCOP Framework Tutorial : 14.3.03 (1 day) CLEAN-2002 : Working in a cleanroom : 2.4.03 (half-day, afternoon, free course, registration required) LabView base 1/LabView Basics 1 : 9 - 11.4.03 (3 jours/3 days) Langue à définir/Language to be decided DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (...

  12. Places available **

    CERN Multimedia

    2003-01-01

    Des places sont disponibles dans les cours suivants : Places are available in the following courses : DISP-2003 - Spring I Term : Introduction to Digital Signal Processing : 20, 27.2, 6, 13, 20, 27.3, 3.4.03 (7 X 2-hour lectures) AXEL-2003 - Introduction to Accelerators : 24 - 28.2.03 (10 X 1-hour lectures) AutoCAD 2002 - niveau 1 : 24, 25.2 & 3, 4.3.03 (4 jours) Introduction à Windows 2000 au CERN : 25.2.03 (1/2 journée) LabView base 2/LabView Basics 2 : 10 & 11.3.03 (2 jours/2 days) langue à définir/Language to be decided C++ for Particle Physicists : 10 - 14.3.03 (6 X 3-hour lectures) Introduction to PVSS : 10.3.03 (half day, afternoon) Basic PVSS : 11 - 13.3.03 (3 days) LabView avancé /LabView Advanced : 12 - 14.3.03 (3 jours/3days) Langue à définir/language to be decided AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 17, 18, 24 & 25.3.03 (6 jours) PVSS - JCOP Framework Tutorial : 14.3.03 (1 day) CLEAN-2002 : Working in a cleanroom : 2.4.03 (half-day, afternoon, free course, regis...

  13. Places available **

    CERN Multimedia

    2003-01-01

    Des places sont disponibles dans les cours suivants : Places are available in the following courses : C++ for Particle Physicists : 10 - 14.3.03 (6 X 3-hour lectures) Introduction to PVSS : 10.3.03 (half day, afternoon) Basic PVSS : 11 - 13.3.03 (3 days) PVSS - JCOP Framework Tutorial : 14.3.03 (1 day) CLEAN-2002 : Working in a cleanroom : 2.4.03 (half-day, afternoon, free course, registration required) LabView base 1/LabView Basics 1 : 9 - 11.4.03 (3 jours/3 days) Langue à définir/language to be decided DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) AutoCAD 2002 - niveau 1 : 29, 30.4 et 7, 8.5.03 (4 jours) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03 (6 jours) Formation Siemens SIMATIC /Siemens SIMATIC Training : Introduction à STEP7 /Introduction to STEP7 : 11 & 12.3.03 / 3 & 4.6.03 (2 jours/2 days) Programmation STEP7/STEP7 Programming : 31.3 - 4.4.03 / 16...

  14. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses: Conception de PCB rapides dans le flot Cadence : 11.6.03 (matin) EXCEL 2000 - level 1 : 12 & 13.6.03 (2 days) Introduction to PVSS : 16.6.03 (p.m.) Basic PVSS : 17 - 19.6.03 (3 days) Réalisation de PCB rapides dans le flot Cadence : 17.6.03 (matin) PVSS - JCOP Framework Tutorial : 20.6.03 (1 day) Programmation automate Schneider : Programmation automate Schneider TSX Premium - 2ème niveau : 24 - 27.6.03 (4 jours) - audience : toute personne qui veux maitriser la mise en uvre et la programmation des fonctions spécialisées d'un automate TSX Premium - objectifs : maitriser la mise en uvre et la programmation des fonctions spécialisées d'un automate TSX Premium Cours de sécurité : Etre TSO au CERN : Prochaines sessions : 24, 25 & 27.6.03 - 4, 5 & 7.11.03 (session de 3 jours) ** The number of places available may vary. Please check our Web site to find out the current availability. If you wish to participate in one of these courses, pl...

  15. Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses : EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) CLEAN-2002 : Working in a Cleanroom (free of charge) : 23.10.03 (half day) The EDMS-MTF in practice (free of charge) :  28 -  30.10.03 (6 half-day sessions) AutoCAD 2002 - Level 1 : 3, 4, 12, 13.11.03 (4 days) LabVIEW TestStand ver. 3 : 4 & 5.11.03 (2 days) Introduction to Pspice : 4.11.03 p.m. (half-day) Hands-on Introduction to Python Programm...

  16. PLACES AVAILABLE

    CERN Multimedia

    Enseignement Technique; Tél. 74924; Technical Training; Monique Duval; Tel. 74924

    2000-01-01

    Places available Places are available in the following courses:   LabView hands-on 13.11.00 4 hours LabView Basics 1 14 - 16.11.00 3 days Nouveautés de WORD 19 et 20.10.00 2 jours ACCESS 1er niveau 30 - 31.10.00 2 jours Advanced aspects of the C language 2 - 3.11.00 2 days Introduction to Oracle SQL and PL/SQL 13 - 17.11.00 5 days C++ for Particle Physicists 20 - 24.11.00 6 lectures Develop PL/SQL Program Units 20 - 22.11.00 3 days Oracle Application Server Develop Web-Based Applications with PL/SQL 27 - 28.11.00 2 days Programmation TSX Premium 1 28.11 - 1.12.00 4 jours Programmation TSX Premium 2 12 - 15.12.00 4 jours If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : http://www.cern.ch/Training/ or fill in an “application for training” form available from your Divisional Secretariat or from your DTO (Divisional Training Offi...

  17. Place identity and place scale: the impact of place salience.

    OpenAIRE

    Bernardo, Fátima; Palma-Oliveira, José-Manuel

    2013-01-01

    Research about place, place identity and attachment supports the idea that bonds with places may differ depending on the place scale. Based on the view that identity is context-dependent, this paper brings to the table the impact of manipulating the salience of place on the intensity of place identity and place attachment reported. A study was designed to examine place identity and place attachment in two groups of residents (permanent and temporary) at three different scales (nei...

  18. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Introduction to Databases :  3 - 4.7.01 (2 days) The JAVA programming language Level 2 : 4 - 6.7.01 (3 days) Enterprise JavaBeans :  9 - 11.7.01 (3 days) Design Patterns :  10 - 12.7.01 (3 days) C++ for Particle Physicists :  23 - 27.7.01 (6 3-hour lectures) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt.

  19. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Introduction to Perl 5 : 2 - 3.7.01 (2 days) Introduction to Databases :  3 - 4.7.01 (2 days) JAVA programming language Level 2 : 4 - 6.7.01 (3 days) Enterprise JavaBeans :  9 - 11.7.01 (3 days) Design Patterns :  10 - 12.7.01 (3 days) C++ for Particle Physicists :  23 - 27.7.01 (6 3-hour lectures) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt.

  20. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: CLEAN-2002 : Travailler en salle blanche (cours gratuit) : 13.08.2002 (matin) Introduction to the CERN Enginnering Data Management System :  27.8.02  (1 day) The CERN Engineering Data Management System for Advanced Users :  28.8.02  (1 day) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval Tel.74924 monique.duval@cern.ch    

  1. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: C++ Programming Level 2 - Traps & Pitfalls:  16 - 19.7.02 (4 days) Frontpage 2000 - level 1 :  22 - 23.7.02  (2 days) Introduction à Windows 2000 au CERN : 24.7.02 (après-midi) CLEAN-2002 : Travailler en salle blanche (cours gratuit) : 13.08.2002 (matin) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval Tel.74924 monique.duval@cern.ch

  2. Placing knowledge

    DEFF Research Database (Denmark)

    Adriansen, Hanne Kirstine; Valentin, Karen; Nielsen, Gritt B.

    ; on the other hand, the rationale for strengthening mobility through internationalisation is based on an imagination of the potentials of particular locations (academic institutions). Intrigued by this tension between universality and particularity in academic knowledge production, this paper presents...... preliminary findings from a project that study internationalisation of higher education as an agent in the interrelated processes of place-making and knowledge-making. The project is based on three case-studies. In this paper, focus is on PhD students’ change of research environment. This is used as a case......Internationalisation of higher education is premised by a seeming paradox: On the one hand, academic knowledge strives to be universal in the sense that it claims to produce generalizable, valid and reliable knowledge that can be used, critiqued, and redeveloped by academics from all over the world...

  3. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: December 2002   PCAD Schémas - Débutants :  5 & 6.12.02  (2 jours) PCAD PCB - Débutants :  9 - 11.12.02  (3 jours) FrontPage 2000 - level 1:  9 & 10.12.02  (2 days) Introduction à la CAO Cadence (cours gratuit) :  10 & 11.12.02  (2 jours) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval Tel.74924 monique.duval@cern.ch

  4. Influence of Solvent-Solvent and Solute-Solvent Interaction Properties on Solvent-Mediated Potential

    International Nuclear Information System (INIS)

    Zhou Shiqi

    2005-01-01

    A recently proposed universal calculational recipe for solvent-mediated potential is applied to calculate excess potential of mean force between two large Lennard-Jones (LJ) or hard core attractive Yukawa particles immersed in small LJ solvent bath at supercritical state. Comparison between the present prediction with a hypernetted chain approximation adopted for solute-solute correlation at infinitely dilute limit and existing simulation data shows high accuracy for the region with large separation, and qualitative reliability for the solute particle contact region. The calculational simplicity of the present recipe allows for a detailed investigation on the effect of the solute-solvent and solvent-solvent interaction details on the excess potential of mean force. The resultant conclusion is that gathering of solvent particles near a solute particle leads to repulsive excess PMF, while depletion of solvent particles away from the solute particle leads to attractive excess PMF, and minor change of the solvent-solvent interaction range has large influence on the excess PMF.

  5. [Chemical hazards when working with solvent glues].

    Science.gov (United States)

    Domański, Wojciech; Makles, Zbigniew

    2012-01-01

    Solvent glues are used in a wide variety of industries, e.g., textile, footwear and rubber. The problem of workers' exposure to solvent vapors is rarely tackled within the area of occupational safety and health in small and medium-sized enterprises. In order to assess exposure to solvents, organic solvents emitted by glues were identified in the samples of workplace air. The concentration of acetone, benzene, cyclohexane, ethylbenzene, n-hexane, methylcyclohexane, butyl acetate and toluene were determined. The obtained results evidenced the presence of cyclohexane, ethylbenzene, ethylcyclohexane, heptane, n-hexane, o-xylene, methylcyclohexane, methylcyclopentane, butyl acetate and toluene in workplace air. The concentration of those compounds in workplace air was low, usually below 0.15 of MAC. At some workstations the presence of benzene was also observed. Occupational risk was assessed at workstations where gluing took place. It showed that the risk at those workstations was medium or low.

  6. Places available **

    CERN Multimedia

    2003-01-01

    Places are available in the following courses: PIPES-2003 - Pratique du Sertissage de tubes métalliques et multicouches : 26.8.03 (stage pratique) The CERN Engineering Data Management System (EDMS) for Engineers : 27.8.03 (1 day, free of charge) CLEAN-2002 : Travailler en salle blanche : 4.9.03 (une demi-journée, séminaire gratuit) The CERN Engineering Data Management System (EDMS) for Local Administrators : 24 & 25.9.03 (2 days, free of charge) Siemens SIMATIC Training : Programmation STEP7 - niveau 1 : 29 - 2.10.03 (4 jours) - ouverture des inscriptions fin août Programmation STEP7 - niveau 2 : 13 - 17.10.03 (5 jours) - ouverture des inscriptions fin août Réseau Simatic Net : 22 & 23.10.03 (2 jours) - ouverture des inscriptions fin août CLEAN-2002 : Working in a Cleanroom : 23.20.03 (half day, free of charge) These courses will be given in French or Englis...

  7. Places available**

    CERN Document Server

    2003-01-01

    Places are available in the following courses : FrontPage 2000 - niveau 1: 20 & 21.5.03 (2 jours) PIPES-2003 : Pratique du sertissage de tubes métalliques et multicouches: 21.5.03 (1 jour) Introduction à la CAO Cadence: de la saisie de schéma Concept-HDL au PCB : 20 & 22.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (E): 5, 6, 12, 13, 26, 27.6.03 (6 days) EXCEL 2000 - niveau 1: 10 & 11.6.03 (2 jours) Conception de PCB rapides dans le flot Cadence: 11.6.03 (matin) EXCEL 2000 - level 1: 12 & 13.6.03 (2 days) Introduction to PVSS: 16.6.03 (half-day, pm) Basic PVSS: 17 - 19.6.03 (3 days) Réalisation de PCB rapides dans le flot Cadence: 17.6.03 (matin) LabView DSC (language to be defined): 19 & 20.6.03 PVSS - JCOP Framework Tutorial: 20.6.03 (1 day) EXCEL 2000 - niveau 2: 24 & 25.6.03 (2 jours) Siemens SIMATIC Training: Introduction to STEP7: 3 & 4.6.03 (2 days) STEP7 Programming: 16 - 20.6.03 (5 days) Simatic Net Network: 26 & 27.6.03 (2 days) These courses will be given...

  8. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: LabView Hands-on (bilingue/bilingual - gratuit/free of charge) : 13.9.02 (a.m.) LabView DAQ Hands-on (bilingue/bilingual - gratuit/free of charge) : 13.9.02 (p.m.) AutoCAD 2002 - niveau 1 : 19, 20, 26, 27.9.02 (4 jours) LabView Base 1 : 23 - 25.9.02 (3 jours) LabView DAQ (E) : 26 - 27.9.02 (2 days) AutoCAD Mechanical 6 PowerPack (F) : 30.9, 1, 2, 9, 10, 11.10.02 (6 jours) CLEAN-2002 : Working in a Cleanroom (free of charge) : 10.10.02 (half-day, p.m.) AutoCAD 2002 - niveau 2 : 14 - 15.10.02 (2 jours) AutoCAD 2002 - Level 1 : 17, 18, 24, 25.10.02 (4 days) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Of...

  9. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: Introduction to Oracle 8i : SQL and PL/SQL:  7 - 11.10.02  (5 days) CLEAN-2002 : Working in a Cleanroom (free of charge):  10.10.02  (half-day, p.m.) AutoCAD 2002 - niveau 2 :  14 - 15.10.02  (2 jours) Introduction à DesignSpace :  16.10.02  (1 journée) Introduction to DesignSpace:  17.10.02  (1 day) AutoCAD 2002 - Level 1:  17, 18, 24, 25.10.02  (4 days) AutoCAD Mechanical 6 PowerPack (F) :  21, 22, 23.10 et 4, 5, 6.11.02  (6 jours) Introduction à ANSYS/Introduction to ANSYS (langue à définir suivant demande/ Language to be chosen according to demand):  21 - 25.10.02  (5 jours/days) HREF-2002: Helium Refrigeration Techniques (English-French, bilingual) :  21 - 25.10.2002  (7 half days) HREF-2002: Techniques de la Réfri...

  10. Places available**

    CERN Document Server

    2003-01-01

    Places are available in the following courses : The CERN EDMS for Local Administrators : 24 & 25.9.03 (2 days, free of charge) HeREF-2003 : Techniques de la réfrigération Hélium (cours en français avec support en anglais) : 6 - 10.10.2003 (7 demi-journées) The Java Programming Language Level 1 : 6 - 7.10.2003 (2 days) Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 8 - 10.10.2003 (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) AutoCAD 2002 - niveau 1 : 20, 21, 27, 28.10.03 (4 jours) CLEAN-2002 : Working in a Cleanroom : 23.10.03 (half day, free of charge) AutoCAD 2002 - Level 1 : 3, 4, 12, 13.11.03 (4 days) AutoCAD 2002 - niveau 2 : 10 & 11.11.03 (2 jours) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) AutoCAD Mechanical 6 PowerPack (E) : 17, 18, 24, 25.11 & 1, 2.12.03 (6...

  11. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: Introduction à DesignSpace :  16.10.02  (1 journée) AutoCAD Mechanical 6 PowerPack (F) :  21, 22, 23.10 et 4, 5, 6.11.02  (6 jours) Introduction à ANSYS 21 - 25.10.02  (5 jours/days) HREF-2002: Helium Refrigeration Techniques (English-French, bilingual) :  21 - 25.10.2002  (7 half days) LabVIEW Basics 1 (English):  21 - 23.10.02  (3 days) LabVIEW Basics 2 (English):  24 & 25.10.02  (2 days) Oracle 8i : Access the Database with Java:  7 & 8.11.02  (2 days) AutoCAD 2002 - niveau 2 :  7 & 8.11.02  (2 jours) AutoCAD 2002 - Level 1:  14, 15, 21, 22.11.02  (4 days) LabVIEW - Advanced (English) :  18 - 20.11.2002  (3 days) AutoCAD 2002 - niveau 1 :  19, 20, 25, 26.11.02 (4 jours) Oracle iDS Designer: First Class:&...

  12. Places available**

    CERN Document Server

    2003-01-01

    Places are available in the following courses: CLEAN-2002 : Travailler en salle blanche (séminaire gratuit) : 4.9.03 (une demi-journée) The CERN EDMS for Local Administrators (free of charge) : 24 & 25.9.03 (2 days) HeREF-2003 : Techniques de la réfrigération Hélium (cours en français avec support en anglais) : 6 - 10.10.2003 (7 demi-journées) The Java Programming Language Level 1 : 6 - 7.10.2003 (2 days) Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 8 - 10.10.2003 (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) AutoCAD 2002 - niveau 1 : 20, 21, 27, 28.10.03 (4 jours) CLEAN-2002 : Working in a Cleanroom (free of charge) : 23.10.03 (half day) AutoCAD Mechanical 6 PowerPack (E) : 23, 24, 30, 31.10 & 12, 13.11.03 (6 days) AutoCAD 2002 - niveau 2 : 10 & 11.11.03 (2 jours)...

  13. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses: The CERN EDMS for Local Administrators : 24 & 25.9.03 (2 days, free of charge) HeREF-2003 : Techniques de la réfrigération Hélium cours en français avec support en anglais) : 6 - 10.10.2003 (7 demi-journées) The Java Programming Language Level 1 : 6 - 7.10.2003 (2 days) Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 8 - 10.10.2003 (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) AutoCAD 2002 - niveau 1 : 20, 21, 27, 28.10.03 (4 jours) CLEAN-2002 : Working in a Cleanroom : 23.10.03 (half day, free of charge) AutoCAD 2002 - Level 1 : 3, 4, 12, 13.11.03 (4 days) AutoCAD 2002 - niveau 2 : 10 & 11.11.03 (2 jours) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) AutoCAD Mechanical 6 PowerPack (E) : 17, 18, 24, 25.11 & 1, 2.12.03 (6 days) FrontPage 2000 - niveau 1 : 20 & 21.11.03 (2 jours) MAGNE-03 : Magnétisme pour l'électrotechnique : 25 - 27.11.03 (3 jours) ...

  14. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: LabView hands-on (bilingue/bilingual): 5.11.02 (matin/morning) LabView DAQ hands-on (bilingue/bilingual):  5.11.02  (après-midi afternoon) Introduction au PC et Windows 2000 au CERN:  6 & 7.11.02  (2 jours) Oracle 8i : Access the Database with Java:  7 & 8.11.02  (2 days) AutoCAD 2002 - niveau 2:  7 & 8.11.02  (2 jours) Introduction to PVSS (free of charge):  11.11.2002 pm  (1/2 day) Basic PVSS:  12 - 14.11.02  (3 days) EXCEL 2000 - niveau 1:  12 & 13.11.02  (2 jours) CLEAN-2002: Working in a Cleanroom (English, free of charge):  13.11.2002  (afternoon) LabView Base 1 :  13 - 15.11.02  (3 jours) AutoCAD 2002 - Level 1:  14, 15, 21, 22.11.2002  (4 days) LabVIEW - Advanced:  18 - 20.11.02  (3 days) Auto...

  15. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses: PIPES-2003 - Pratique du sertissage de tubes métalliques et multicouches :26.8.03(stage pratique) The CERN EDMS for Engineers (free of charge) : 27.8.03 (1 day) CLEAN-2002 : Travailler en salle blanche (séminaire gratuit) : 4.9.03(une demi-journée) The CERN EDMS for Local Administrators (free of charge) : 24 & 25.9.03 (2 days) HeREF-2003 : Techniques de la réfrigération Hélium (cours en français avec support en anglais) : 6 - 10.10.2003 (7 demi-journées) The Java Programming Language Level 1 : 6 - 7.10.2003 (2 days) Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 8 - 10.10.2003 (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) AutoCAD 2002 - niveau 1 : 20, 21, 27, 28.10.03 (4 jours) CLEAN-2002 : Working in a Cleanroom (free of charge) : 23.10.03 (half day) AutoCAD Mechanical 6 PowerPack (E) : 23, 24, 30, 31.10 & 12, 13.11.03 (6 days) AutoCAD 2002 - niveau 2...

  16. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses: The CERN EDMS for Local Administrators (free of charge) : 24 & 25.9.03 (2 days) HeREF-2003 : Techniques de la réfrigération Hélium (cours en français avec support en anglais) : 6 - 10.10.2003 (7 demi-journées) The Java Programming Language Level 1 : 6 - 7.10.2003 (2 days) Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 8 - 10.10.2003 (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) AutoCAD 2002 - niveau 1 : 20, 21, 27, 28.10.03 (4 jours) CLEAN-2002 : Working in a Cleanroom (free of charge) : 23.10.03 (half day) AutoCAD Mechanical 6 PowerPack (E) : 23, 24, 30, 31.10 & 12, 13.11.03 (6 days) AutoCAD 2002 - niveau 2 : 10 & 11.11.03 (2 jours) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) FrontPage 2000 - niveau 1 : 20...

  17. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: October 2002   Introduction to the CERN Engineering Data Management System (free of charge):  29.10.2002  (1 day) The CERN EDMS for Advanced users (free of charge):  30.10.2002  (1 day) November 2002   LabView hands-on (bilingue/bilingual): 5.11.02 (matin/morning) LabView DAQ hands-on (bilingue/bilingual):  5.11.02  (après-midi afternoon) Introduction au PC et Windows 2000 au CERN :  6 & 7.11.02  (2 jours) Oracle 8i : Access the Database with Java:  7 & 8.11.02  (2 days) AutoCAD 2002 - niveau 2 :  7 & 8.11.02  (2 jours) Introduction to PVSS (free of charge):  11.11.2002 pm  (1/2 day) Basic PVSS:  12 - 14.11.02  (3 days) EXCEL 2000 - niveau 1 :  12 & 13.11.02  (2 jours) CLEAN-2002: Working in a Cleanroom (English, free ...

  18. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: Introduction to Oracle 8i : SQL and PL/SQL:  7 - 11.10.02  (5 days) CLEAN-2002 : Working in a Cleanroom (free of charge):  10.10.02  (half-day, p.m.) LabView Hands-on (bilingue/bilingual) : 10.10.02 (matin/morning) LabView DAQ Hands-on (bilingue/bilingual)  10.10.02 (après-midi /afternoon) Introduction à DesignSpace :  16.10.02  (1 journée) Introduction to DesignSpace:  17.10.02  (1 day) AutoCAD Mechanical 6 PowerPack (F) :  21, 22, 23.10 et 4, 5, 6.11.02  (6 jours) Introduction à ANSYS/Introduction to ANSYS (langue à définir suivant demande/ Language to be chosen according to demand):  21 - 25.10.02  (5 jours/days) HREF-2002: Helium Refrigeration Techniques (English-French, bilingual) :  21 - 25.10.2002  (7 half days) HREF-2002: Techniques de la...

  19. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel 74924

    2002-01-01

    Places are available in the following courses: LabView hands-on : 21.01.02 (1/2 journée) LabView DAQ hands-on : 21.01.02 (1/2 journée) FileMaker Pro : 22 - 25.1.02 (4 jours) MS-Project 2000 : 24 & 25.01.02 (2 jours) Introduction au PC et à Windows 2000 au CERN : 29 - 30.1.02 (2 jours) LabView Base 1 : 4 - 6.2.02 (3 jours) LabView DAQ (E) : 7 & 8.02.02 (2 days) Hands-on Object-Oriented Design & Programming with Java : 11 - 13.02.02 (3 days) C++ for Particle Physicists : 11 - 15.3.2002 (6 * 3 hour lectures) Cours sur la migration AutoCAD : AutoCAD : Mise à jour AutoCAD r-14 vers 2002 (2 jours) AutoCAD Mechanical PowerPack 6 basé sur AutoCAD 2002 (5 jours) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO ...

  20. PLACES AVAILABLE

    CERN Multimedia

    Enseignement Technique; Tél. 74924; Technical Training; Monique Duval; Tel. 74924

    2000-01-01

    Places are available in the following courses : Premiers pas avec votre PC 12 - 15.9.00 (4 demi-journées) WORD 20, 21 et 26, 27.9.2000 (4 jours) JAVA programming level 1 25 - 26.9.2000 (2 days) Gaz inflammables 1 26.9.2000 (1 journée) Advanced aspects of PERL 5 6.10.2000 (1 day) Initiation au WWW 10 - 12.10.00 (3 demi-journées) WORD : importer et manipuler des images 16.10.2000 (1 journée) FileMaker 17, 18 et 24, 25.10.00 (4 jours) Nouveautés de WORD 19 et 20.10.2000 (2 jours) ACCESS 1er niveau 30 - 31.10.00 (2 jours)Introduction à PowerPoint 6.11.00 (1 journée)Nouveautés d’EXCEL 7.11.2000(4 demi-journées)Excel 13, 14 et 20, 21.11.00 (4 jours) LabView hands-on 13.11.2000(4 hours)LabView Basics 1 14 - 16.11.2000 (3 days) MS-Project 1er niveau 14-17.11.00 (4 demi-journées) If you wish to participate in one of these courses, please discuss with your supervisor and apply elec...

  1. PLACES AVAILABLE

    CERN Multimedia

    TECHNICAL TRAINING; Tel. 74460

    2001-01-01

    Places are available in the following courses: MS-Project 1er niveau : 20 - 23.2.01 (4 matins) Architecture d'automatisme : 20 - 21.2.01 (2 jours) Introduction à PowerPoint : 26.2.01 (1 journée) Programmation TSX Premium 1 (Schneider) : 26.2 - 2.3.01 (5 jours) Premiers pas avec votre PC : 27.2 - 2.3.01 (4 matins) C++ for Particle Physicists : 5 - 9.3.01 (6*3 hour lectures) EXCEL : 6, 7 et 13, 14.3.01 (4 jours) The JAVA programming language level 2 :  12 - 14.3.01 (3 days) Nouveautés de FileMaker :  20 - 23.03.01 (4 matins) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt.

  2. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2002-01-01

    Places are available in the following courses: LabView hands-on : 21.01.02 (1/2 journée) LabView DAQ hands-on : 21.01.02 (1/2 journée) FileMaker Pro : 22 - 25.1.02 (4 jours) MS-Project 2000 : 22, 24 & 25.01.02 (3 jours) Introduction au PC et à Windows 2000 au CERN : 29 - 30.1.02 (2 jours) LabView Base 1 : 4 - 6.2.02 (3 jours) LabView DAQ  (E) :  7 & 8.02.02 (2 days) Hands-on Object-Oriented Design & Programming with Java :  11 - 13.02.02 (3 days) PVSS basics :  11 - 15.2.02 (5 days) Introduction à Windows 2000 : 18.2.02 (1 demi-journée) Introduction to the CERN Engineering Data Management System :  20.2.02 (1 day) The CERN Engineering Data Management System for Advanced users :  21.2.02  (1 day) C++ for Particle Physicists :  11 - 15.3.2002  (6 * 3 hour lectures) Cours sur la migration AutoCAD : AutoCAD : Mise à...

  3. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: LabVIEW - Basics 1 :  10 - 12.12.01 (3 days) Introduction to XML :  12 & 13.12.01 (2 days) Introduction au PC et Windows 2000 : 12 & 14.12.01 (2 jours) LabVIEW - Basics 2 :  13 - 14.12.01 (2 days) Habilitation électrique : superviseurs : 17.12.2001 (1/2 journée) MS-Project 2000 : 10 & 11.01.02 (2 jours) EXCEL 2000 - niveau 2 : 15 - 16.1.02 (2 jours) Sécurité dans les installations cryogéniques: 15-17.1.2002 (2 demi-journées) C++ Programming Level 2 - Traps and Pitfalls :  15 - 18.1.2002  (4 days) ELEC-2002 Winter Term: Readout and system electronics for Physics  15.1.2002 - 7.2.2002 (8 half- days) Nouveautés de WORD 2000 : 18.1.02 (1/2 journée) LabView hands-on : 21.01.02 (1/2 journée) LabView DAQ hands-on : 21.01.02 (1/2 journée) FileMaker Pro : 22 -...

  4. PLACES AVAILABLE

    CERN Multimedia

    Enseignement Technique; Tel. 74924

    2001-01-01

    Places are available in the following courses: MS-Project 2000 : 10 & 11.01.02 (2 jours) EXCEL 2000 - niveau 2 : 15 - 16.1.02 (2 jours) Sécurité dans les installations cryogéniques: 15-17.1.2002 (2 demi-journées) C++ Programming Level 2 - Traps and Pitfalls :  15 - 18.1.2002  (4 days) ELEC-2002 Winter Term: Readout and system electronics for Physics  15.1.2002 - 7.2.2002 (8 half- days) Nouveautés de WORD 2000 : 18.1.02 (1/2 journée) LabView hands-on : 21.01.02 (1/2 journée) LabView DAQ hands-on : 21.01.02 (1/2 journée) FileMaker Pro : 22 - 25.1.02 (4 jours) MS-Project 2000 : 24 & 25.01.02 (2 jours) Introduction au PC et à Windows 2000 au CERN : 29 - 30.1.02 (2 jours) LabView Base 1 : 4 - 6.2.02 (3 jours) LabView DAQ  (E) :  7 & 8.02.02 (2 days) Hands-on Object-Oriented Design & Programming with Java :&nbs...

  5. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : CLEAN-2002 : Working in a cleanroom (free course, registration required) : 2.4.03 (half-day, afternoon) LabView base 1/LabView Basics 1 (Langue à définir/ language to be decided) : 9 - 11.4.03 (3 jours/3 days) DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) AutoCAD 2002 - niveau 1 : 29, 30.4 et 7, 8.5.03 (4 jours) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03(6 jours) Formation Siemens SIMATIC /Siemens SIMATIC Training : Introduction à STEP7 /Introduction to STEP7 : 3 & 4.6.03 (2 jours/2 days) Programmation STEP7/STEP7 Programming : 31.3 - 4.4.03 / 16 - 20.6.03 (5 jours/5 days) Réseau Simatic Net /Simatic Net Network : 15 & 16.4.03 / 26 & 27.6.03 These courses will be given in French or English following the requests. Cours de sécurité : Etre TSO au CERN : 3 sessions sont programmées pour 2003 : 25...

  6. Places available **

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : CLEAN-2002 : Working in a cleanroom (free course, registration required): 11.4.03 (half-day, afternoon, ) LabView Basics 2 : 10 - 11.4.03 (3 days) DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) AutoCAD 2002 - niveau 1 : 29, 30.4 et 7, 8.5.03 (4 jours) Oracle iDS Reports : Build Internet Reports : 5 - 9.5.03 (5 days) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03 (6 jours) Formation Siemens SIMATIC /Siemens SIMATIC Training : Introduction à STEP7 /Introduction to STEP7 : 3 & 4.6.03 (2 jours/2 days) Programmation STEP7/STEP7 Programming : 31.3 - 4.4.03 / 16 - 20.6.03 (5 jours/5 days) Réseau Simatic Net /Simatic Net Network : 15 & 16.4.03 / 26 & 27.6.03 These courses will be given in French or English following the requests. Cours de sécurité : Etre TSO au CERN : Prochaines sessions : 24, 25 & 27.6....

  7. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) Oracle iDS Reports : Build Internet Reports : 5 - 9.5.03 (5 days) LabView DAQ (language to be defined) : 8 & 9.5.03 AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03 (6 jours) AutoCAD 2002 - niveau 2 : 3 & 4.6.03 (2 jours) LabView DSC (language to be defined) : 19 & 20.6.03 Siemens SIMATIC Training : Introduction to STEP7 : 3 & 4.6.03 (2 days) STEP7 Programming : 16 - 20.6.03 (5 days) Simatic Net Network : 15 & 16.4.03 / 26 & 27.6.03 (sessions of 2 days) These courses will be given in French or English following the requests. Cours de sécurité : Etre TSO au CERN : Prochaines sessions : 24, 25 & 27.6.03 - 4, 5 & 7.11.03 (session de 3 jours) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description ...

  8. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: Habilitation électrique : recyclage HT/BT : 11 - 15.3.2002  (2 * 2 heures) PVSS Basics :  8 - 12.4.02  (5 days) ELEC-2002 : Spring Term :  9, 11, 16, 18, 23, 25, 30.4.02 (7 * 2.5 hours) LabVIEW base 1 : 22 - 24.4.02 (3 jours) LabVIEW DSC (F) 25 & 26.4.02 (2 jours) LabVIEW Basics 2 : 13 & 14.5.02 (2 days) LabVIEW DAQ (F) : 15 & 16.5.02 (2 jours) Cours sur la migration AutoCAD :   AutoCAD : Mise à jour AutoCAD r-14 vers 2002 (2 jours) AutoCAD Mechanical PowerPack 6 basé sur AutoCAD 2002 (5 jours) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applica...

  9. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : CLEAN-2002 : Working in a cleanroom (free course, registration required): 11.4.03 (half-day, afternoon, ) LabView Basics 2 : 10 - 11.4.03 (3 days) DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) AutoCAD 2002 - niveau 1 : 29, 30.4 et 7, 8.5.03 (4 jours) Oracle iDS Reports : Build Internet Reports : 5 - 9.5.03 (5 days) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03(6 jours) Formation Siemens SIMATIC /Siemens SIMATIC Training : Introduction à STEP7 /Introduction to STEP7 : 3 & 4.6.03 (2 jours/2 days) Programmation STEP7/STEP7 Programming : 31.3 - 4.4.03 / 16 - 20.6.03 (5 jours/5 days) Réseau Simatic Net /Simatic Net Network : 15 & 16.4.03 / 26 & 27.6.03 These courses will be given in French or English following the requests. Cours de sécurité : Etre TSO au CERN : Prochaines sessions : 24, 25 & 27.6...

  10. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) Programmation de pilotes périphériques : 5 - 8.5.03 (4 jours) Oracle iDS Reports : Build Internet Reports : 5 - 9.5.03 (5 days) LabView DAQ (language to be defined) : 8 & 9.5.03 AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.0 (6 jours) FrontPage 2000 - niveau 1 : 20 & 21.5.03 (2 jours) AutoCAD 2002 - niveau 2 : 3 & 4.6.03 (2 jours) EXCEL 2000 - niveau 1 : 10 & 11.6.03 (2 jours) EXCEL 2000 - level 1 : 12 & 13.6.03 (2 days) PowerPoint 2000 (F) : 17 & 18.6.03 (2 jours) FrontPage 2000 - niveau 2 : 19 & 20.6.03 (2 jours) LabView DSC (langue à décider/language to be defined) : 19 & 20.6.03 EXCEL 2000 - niveau 2 : 24 & 25.6.03 (2 jours) Siemens SIMATIC Training : Introduction to STEP7 : 3 & 4.6.03 (2 days) STEP7 Programming : 16 - 20.6.03 (5 days) Simatic Net Network : 26 & 27.6.03 ...

  11. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : CLEAN-2002 : Working in a cleanroom (free course, registration required): 11.4.03 (half-day, afternoon) LabView Basics 2 : 10 - 11.4.03 (3 days) DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) AutoCAD 2002 - niveau 1 : 29, 30.4 et 7, 8.5.03 (4 jours) Oracle iDS Reports : Build Internet Reports : 5 - 9.5.03 (5 days) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03(6 jours) Formation Siemens SIMATIC /Siemens SIMATIC Training : Introduction à STEP7 /Introduction to STEP7 : 3 & 4.6.03 (2 jours/2 days) Programmation STEP7/STEP7 Programming : 16 - 20.6.03 (5 jours/5 days) Réseau Simatic Net /Simatic Net Network : 15 & 16.4.03 / 26 & 27.6.03 These courses will be given in French or English following the requests. Cours de sécurité : Etre TSO au CERN : Prochaines sessions : 24, 25 & 27.6.03 - 4, 5 & 7....

  12. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : Introduction to PVSS : 10.3.03 (half-day, afternoon) CLEAN-2002 : Working in a cleanroom : 2.4.03 (half-day, afternoon, free course, registration required) LabView Basics 1 : 9 - 11.4.03 (3 days) Language to be decided. DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures). AutoCAD 2002 - niveau 1 : 29, 30.4 et 7, 8.5.03 (4 jours) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03 (6 jours) Siemens SIMATIC Training: Introduction to STEP7 : 3 & 4.6.03 (2 days) STEP7 Programming : 31.3 - 4.4.03 / 16 - 20.6.03 (5 days) Simatic Net Network : 15 & 16.4.03 / 26 & 27.6.03 These courses will be given in French or English following the requests. Cours de sécurité: Etre TSO au CERN : 3 sessions sont programmées pour 2003 : 25, 26 & 28.3.03 - 24, 25 & 27.6.03 - 4, 5 & 7.11.03 (sessions de 3 jours) ** The number o...

  13. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: November 2002   Hands-on Object-Oriented Design and Programming with C++:  19 - 21.11.02  (3 days)  December 2002   LabVIEW - DSC (English) :  2 - 3.12.02  (2 days) AutoCAD 2002 - niveau 2 :  2 & 3.12.02  (2 jours) FileMaker (Français) :  2 - 5.12.02  (4 jours) PCAD Schémas - Débutants :  5 & 6.12.02  (2 jours) PCAD PCB - Débutants :  9 - 11.12.02  (3 jours) FrontPage 2000 - level 1:  9 & 10.12.02  (2 days) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisiona...

  14. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: November 2002   Java Programming Language level 1 :  28 & 29.11.02  (2 days) December 2002   LabVIEW - DSC (English) :  2 - 3.12.02  (2 days) FileMaker (Français) :  2 - 5.12.02  (4 jours) PCAD Schémas - Débutants :  5 & 6.12.02  (2 jours) PCAD PCB - Débutants :  9 - 11.12.02  (3 jours) FrontPage 2000 - level 1:  9 & 10.12.02  (2 days) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training M...

  15. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: November 2002   Introduction to PVSS (free of charge): 11.11.02  (afternoon) EXCEL 2000 - niveau 1 :  12 & 13.11.02  (2 jours) CLEAN-2002: Working in a Cleanroom (English, free of charge):  13.11.2002  (afternoon) AutoCAD 2002 - niveau 1 :  14, 15, 21, 22.11.02  (4 jours) Hands-on Object-Oriented Design and Programming with C++:  19 - 21.11.02  (3 days)  EXCEL 2000 - niveau 2 :  25 & 26.11.02  (2 jours) FrontPage 2000 - niveau 1 :  27 & 28.11.02  (2 jours) December 2002   LabVIEW - DSC (English) :  2 - 3.12.02  (2 days) AutoCAD 2002 - niveau 2 :  2 & 3.12.02  (2 jours) FileMaker (Français) :  2 - 5.12.02  (4 jours) PCAD Schémas - Débutants :  5 & 6.12.02 ...

  16. PLACES AVAILABLE

    CERN Multimedia

    Technical training; Tel. 74924

    2001-01-01

    Places are available in the following courses: PROFIBUS : 25 - 26.9.01 (2 jours) PROFIBUS : 27 - 28.9.01 (2 days) Automates et réseaux de terrain : 3 - 4.10.2001 (2 jours) PCAD Schémas - débutants : 4 - 5.10.01 (2 jours) PCAD PCB - débutants : 8 - 10.10.01 (3 jours) Programmation TSX Premium 1 : 15 - 19.10.01 (5 jours) Programmation TSX Premium 1 : 22 - 26.10.01 (5 jours) Programming TSX Premium 2: 19 - 23.11.01 (5 days) Programmation TSX Premium 2 : 26 - 30.11.01 (5 jours) Autocad Migration support courses: a detailed calendar will be published shortly for this series of sessions which will start on 15.10.2001. Registration is already open AutoCAD : Mise à jour AutoCAD r-14 vers 2002 (2 jours) AutoCAD Mechanical PowerPack 6 basé sur AutoCAD 2002 (5 jours) The following LabView courses will be given in either English or French according to demand LabVIEW - Base 1 / LabVIEW - Basics 1 : 10 - 12.9.01 (3 jours / 3 days)...

  17. PLACES AVAILABLES

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: PVSS Basics : 20 - 24.8.01 (5 days) PROFIBUS : 25 - 26.9.01 (2 jours) PROFIBUS : 27 - 28.9.01 (2 days) PCAD Schémas - débutants : 4 - 5.10.01 (2 jours) PCAD PCB - débutants : 8 - 10.10.01 (3 jours) Programming TSX Premium 1: 15 - 19.10.01 (5 days) Programmation TSX Premium 1 : 22 - 26.10.01 (5 jours) Programming TSX Premium 2: 19 - 23.11.01 (5 days) Programmation TSX Premium 2 : 26 - 30.11.01 (5 jours) The following LabView courses will be given in either English or French according to demand LabVIEW - Base 1 / LabVIEW - Basics 1 : 10 - 12.9.01 (3 jours / 3 days) LabVIEW - DAQ / LabVIEW - DAQ : 13 - 14.9.01 (2 jours / 2 days) LabVIEW - Base 1 / LabVIEW - Basics 1 : 15 - 17.10.01 (3 jours / 3 days) LabVIEW - Base 2 / LabVIEW - Basics 2 : 18 - 19.10.01 (2 jours / 2 days) LabVIEW - Base 1 / LabVIEW - Basics 1 : 12 - 14.11.01 (3 jours / 3 days) LabVIEW - DAQ / LabVIEW - DAQ : 15 - 16.11.01 (2 jours / 2...

  18. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: November 2002   LabView hands-on (bilingue/bilingual): 5.11.02 (matin/morning) LabView DAQ hands-on (bilingue/bilingual):  5.11.02  (après-midi afternoon) PCAD Schémas - Débutants :  5 & 6.11.02  (2 jours) PCAD PCB - Débutants :  9 - 11.11.02  (3 jours) Introduction au PC et Windows 2000 au CERN :  6 & 7.11.02  (2 jours) Oracle 8i : Access the Database with Java :  7 & 8.11.02  (2 days) Introduction to PVSS (free of charge):  11.11.2002 pm  (1/2 day) Basic PVSS:  12 - 14.11.02  (3 days) EXCEL 2000 - niveau 1 :  12 & 13.11.02  (2 jours) CLEAN-2002: Working in a Cleanroom (English, free of charge):  13.11.2002  (afternoon) LabView Base 1 :  13 - 15.11.02  (3 jours) AutoCAD 2002 - niveau 1 :  14, 15, 21, 22.11.02  (4 jours) LabVIEW - Advanced:  18 - 20.11.02  (3 days) Hands-on Object-Oriented Design and Programming with C++ :  19 - 21.11.02  (3 days)  LabVIEW - Basics 2:  21 - 22.11.02 ...

  19. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : EXCEL 2000 - niveau 1 : 10 & 11.6.03 (2 jours) Conception de PCB rapides dans le flot Cadence : 11.6.03 (matin) EXCEL 2000 - level 1 : 12 & 13.6.03 (2 days) Introduction to PVSS : 16.6.03 (p.m.) Basic PVSS : 17 - 19.6.03 (3 days) Réalisation de PCB rapides dans le flot Cadence : 17.6.03 (matin) PVSS - JCOP Framework Tutorial : 20.6.03 (1 day) EXCEL 2000 - niveau 2 : 24 & 25.6.03 (2 jours) Siemens SIMATIC Training : Introduction to STEP7 : 3 & 4.6.03 (2 jours/2 days) STEP7 Programming : 16 - 20.6.03 (5 jours/5 days) Simatic Net Network : 26 & 27.6.03 (2 jours/2 days) These courses will be given in French or English following the requests. Programmation automate Schneider : Programmation automate Schneider TSX Premium - 1er niveau : 10 - 13.6.03 (4 jours) - audience : toute personne qui veux maitriser la msie en uvre et la programmation d'un automate TSX Premium - objectifs : maitriser la mise en uvre et la programmation d'un autom...

  20. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : FrontPage 2000 - niveau 1 : 20 & 21.5.03 (2 jours) PIPES-2003 : Pratique du sertissage de tubes métalliques et multicouches : 21.5.03 (1 jour) Introduction à la CAO Cadence : de la saisie de schéma Concept-HDL au PCB : 20 & 22.5.03 (2 jours) AutoCAD 2002 - niveau 2 : 3 & 4.6.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 5, 6, 12, 13, 26, 27.6.03 (6 jours) EXCEL 2000 - niveau 1 : 10 & 11.6.03 (2 jours) Conception de PCB rapides dans le flot Cadence : 11.6.03 (matin) EXCEL 2000 - level 1 : 12 & 13.6.03 (2 days) PowerPoint 2000 (F) : 17 & 18.6.03 (2 jours) Réalisation de PCB rapides dans le flot Cadence : 17.6.03 (matin) FrontPage 2000 - niveau 2 : 19 & 20.6.03 (2 jours) LabView DSC (langue à décider/language to be defined) : 19 & 20.6.03 EXCEL 2000 - niveau 2 : 24 & 25.6.03 (2 jours) Siemens SIMATIC Training: Introduction to STEP7 : 3 & 4.6.03 (2 days) STEP7 Programming : 16 - 20.6.03 (5 days) Simatic...

  1. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: PVSS Basics : 20 - 24.8.01 (5 days) PROFIBUS : 25 - 26.9.01 (2 jours) PROFIBUS : 27 - 28.9.01 (2 days) PCAD Schémas - débutants : 4 - 5.10.01 (2 jours) PCAD PCB - débutants : 8 - 10.10.01 (3 jours) Programming TSX Premium 1: 15 - 19.10.01 (5 days) Programmation TSX Premium 1 : 22 - 26.10.01 (5 jours) Programming TSX Premium 2: 19 - 23.11.01 (5 days) Programmation TSX Premium 2 : 26 - 30.11.01 (5 jours) The following LabView courses will be given in either English or French according to demand LabVIEW - Base 1 / LabVIEW - Basics 1 : 10 - 12.9.01 (3 jours / 3 days) LabVIEW - DAQ / LabVIEW - DAQ : 13 - 14.9.01 (2 jours / 2 days) LabVIEW - Base 1 / LabVIEW - Basics 1 : 15 - 17.10.01 (3 jours / 3 days) LabVIEW - Base 2 / LabVIEW - Basics 2 : 18 - 19.10.01 (2 jours / 2 days) LabVIEW - Base 1 / LabVIEW - Basics 1 : 12 - 14.11.01 (3 jours / 3 days) LabVIEW - DAQ / LabVIEW - DAQ : 15 - 16.11.01 (2 jours / 2...

  2. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Introduction à Windows 2000 au CERN : 2 sessions de _ journée les 24 et 25.9.01 PROFIBUS : 25 - 26.9.01 (2 jours) PROFIBUS : 27 - 28.9.01 (2 days) PowerPoint 2000 : 1 et 2.10.01 (2 jours) EXCEL 2000 - niveau 1 : 3 et 4.10.01 (2 jours) Automates et réseaux de terrain : 3 - 4.10.2001 (2 jours) PCAD Schémas - débutants : 4 - 5.10.01 (2 jours) Introduction à Outlook : 5.10.01 (1 journée) Frontpage 2000 - niveau 1 : 8 et 9.10.01 (2 jours) PCAD PCB - débutants : 8 - 10.10.01 (3 jours) C++ for Particle Physicists : 8 - 12.10.01 (6 3-hour lectures) MS-Project 2000 - niveau 1 : 15 - 18.10.01 (4 demi-journées) LabView Basics 1 :  15 - 17.10.01  (3 days) Programmation TSX Premium 1 : 15 - 19.10.01 (5 jours) WORD 2000 : importer et manipuler des images : 19.10.01 (1 journée) Programmation TSX Premium 1 : 22 - 26.10.01...

  3. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Cadence Board Design tools : Upgrading to release 14 :  3 1-day sessions on 9, 10 & 11.10.01 MS-Project 2000 - niveau 1 : 15 - 18.10.01 (4 demi-journées) LabView Base 2 : 18 & 19.10.01 (2 jours) WORD 2000 : importer et manipuler des images : 19.10.01 (1 journée) Contract Follow-up (F) :  30.10.01 (1/2 journée) The CERN Engineering Data Management System for Electronics Design :  30.10.01 (1 day) UNIX pour non-programmeurs : 5 - 7.11.01 (3 jours) The Java programming language Level 1: 8 - 9.11.01 (2 days) LabView Base 1 : 12 - 14.11.01 (3 jours) Introduction to PERL 5 :  15 - 16.11.01  (2 days) Introduction to XML :  19 - 20.11.01 (2 days) Programming TSX Premium 1 :  19 - 23.11.01  (5 days) Introduction to C Programming :  21- 23.11.01 (3 days) The Java programming language Level 2:  26 - 28.11.01 (...

  4. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Introduction à Windows 2000 au CERN : 2 sessions de _ journée les 24 et 25.9.01 PROFIBUS : 25 - 26.9.01 (2 jours) PROFIBUS : 27 - 28.9.01 (2 days) EXCEL 2000 - niveau 1 : 3 et 4.10.01 (2 jours) Automates et réseaux de terrain : 3 - 4.10.2001 (2 jours) Introduction à Outlook : 5.10.01 (1 journée) Frontpage 2000 - niveau 1 : 8 et 9.10.01 (2 jours) C++ for Particle Physicists : 8 - 12.10.01 (6 lectures) MS-Project 2000 - niveau 1 : 15 - 18.10.01 (4 demi-journées) Programmation TSX Premium 1 : 15 - 19.10.01 (5 jours) WORD 2000 : importer et manipuler des images : 19.10.01 (1 journée) Programmation TSX Premium 1 : 22 - 26.10.01 (5 jours) UNIX pour non-programmeurs : 5 - 7.11.01 (3 jours) The Java programming language Level 1: 8 - 9.11.01 (2 days) Introduction to PERL 5 :  15 - 16.11.01  (2 days) Introduction to XML :  19 - 20.11.01 (2...

  5. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: EXCEL 2000 - niveau 1 : 3 et 4.10.01 (2 jours) Automates et réseaux de terrain : 3 - 4.10.2001 (2 jours) Introduction à Outlook : 5.10.01 (1 journée) C++ for Particle Physicists : 8 - 12.10.01 (6 lectures) Cadence Board Design tools : Upgrading to release 14 : 3 1-day sessions on 9, 10 & 11.10.01 MS-Project 2000 - niveau 1 : 15 - 18.10.01 (4 demi-journées) LabView Base 2 : 18 & 19.10.01 (2 jours) WORD 2000 : importer et manipuler des images : 19.10.01 (1 journée) The CERN Engineering Data Management System for Electronics Design :  30.10.01 (1 day) UNIX pour non-programmeurs : 5 - 7.11.01 (3 jours) The Java programming language Level 1: 8 - 9.11.01 (2 days) Introduction to PERL 5 :  15 - 16.11.01  (2 days) Introduction to XML :  19 - 20.11.01 (2 days) Programming TSX Premium 1 :  19 - 23.11.01  (5 days) Introd...

  6. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: MS-Project 2000 - niveau 1 : 15 - 18.10.01 (4 demi-journées) LabView Base 2 : 18 & 19.10.01 (2 jours) WORD 2000 : importer et manipuler des images : 19.10.01 (1 journée) Contract Follow-up (F) : 30.10.01 (1/2 journée) The CERN Engineering Data Management System for Electronics Design :  30.10.01 (1 day) UNIX pour non-programmeurs : 5 - 7.11.01 (3 jours) The Java programming language Level 1: 8 - 9.11.01 (2 days) LabView Base 1 : 12 - 14.11.01 (3 jours) Automates et réseaux de terrain : 13 & 14.11.01 (2 jours) Introduction to PERL 5 :  15 - 16.11.01  (2 days) Introduction to XML :  19 - 20.11.01 (2 days) Programming TSX Premium 1 :  19 - 23.11.01  (5 days) Introduction to C Programming :  21- 23.11.01 (3 days) The Java programming language Level 2:  26 - 28.11.01 (3 days) Programmation TSX Premium 2 : 26 ...

  7. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: LabView Base 1 :  23 - 25.9.02  (3 jours) Object-Oriented Analysis & Design using UML:  25 - 27.9.02  (3 days) LabView DAQ (E):  26 - 27.9.02  (2 days) Introduction to Oracle 8i : SQL and PL/SQL:  7 - 11.10.02  (5 days) CLEAN-2002 : Working in a Cleanroom (free of charge):  10.10.02  (half-day, p.m.) AutoCAD 2002 - niveau 2 :  14 - 15.10.02  (2 jours) Introduction à DesignSpace :  16.10.02  (1 journée) Introduction to DesignSpace:  17.10.02  (1 day) AutoCAD 2002 - Level 1:  17, 18, 24, 25.10.02  (4 days) AutoCAD Mechanical 6 PowerPack (F) :  21, 22, 23.10 et 4, 5, 6.11.02  (6 jours) Introduction à ANSYS/Introduction to ANSYS (langue à définir suivant demande/ Language to be chosen according to demand):...

  8. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: Java 2 Enterprise Edition - Part 2: Enterprise JavaBeans:  18 - 20.9.02  (3 days) AutoCAD 2002 - niveau 1 :  19, 20, 26, 27.9.02  (4 jours) LabView Base 1 :  23 - 25.9.02  (3 jours) Object-Oriented Analysis & Design using UML:  25 - 27.9.02  (3 days) LabView DAQ (E):  26 - 27.9.02  (2 days) Introduction to Oracle 8i : SQL and PL/SQL:  7 - 11.10.02  (5 days) CLEAN-2002 : Working in a Cleanroom (free of charge):  10.10.02  (half-day, p.m.) AutoCAD 2002 - niveau 2 :  14 - 15.10.02  (2 jours) Introduction à DesignSpace :  16.10.02  (1 journée) Introduction to DesignSpace:  17.10.02  (1 day) AutoCAD 2002 - Level 1:  17, 18, 24, 25.10.02  (4 days) AutoCAD Mechanical 6 PowerPack (F) :  21, 22, 23.10 et 4, 5, 6.11....

  9. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Automates et réseaux de terrain : 13 & 14.11.01 (3 jours) Introduction à Windows 2000 au CERN : 12 - 14.11.01 (1/2 journée) Introduction to Windows 2000 at CERN :  14.11.01  (half-day) Introduction to PERL 5 :  15 - 16.11.01  (2 days) Sécurité dans les installations cryogéniques : 21 - 22.11.2001 (2 demi-journées) Introduction to C Programming :  21- 23.11.01 (3 days) Programmation TSX Premium 2 : 26 - 30.11.01 (5 jours) Contract Follow-up (F) : 26.11.01 (1/2 journée) Object-Oriented Analysis and Design :  27 - 30.11.2001  (4 days) Introduction to the CERN Engineering Data Management System :  30.11.2001 (1 day) Electromagnetic Compatibility (EMC): Introduction (bilingual) :  3.12.01 (half-day) Introduction to the CERN Engineering Data Management System : 07.12.2001...

  10. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Contract Follow-up (F) : 30.10.01 (1/2 journée) The CERN Engineering Data Management System for Electronics Design :  30.10.01 (1 day) UNIX pour non-programmeurs : 5 - 7.11.01 (3 jours) Nouveautés d'EXCEL : 5.11.01 (1/2 journée) Introduction a Windows 2000 au CERN : 6.11.01 (1/2 journée) The Java programming language Level 1: 8 - 9.11.01 (2 days) LabView Base 1 : 12 - 14.11.01 (3 jours) Automates et réseaux de terrain : 13 & 14.11.01 (2 jours) Introduction to PERL 5 :  15 - 16.11.01  (2 days) Introduction to XML :  19 - 20.11.01 (2 days) Programming TSX Premium 1 :  19 - 23.11.01  (5 days) Introduction to C Programming :  21- 23.11.01 (3 days) The Java programming language Level 2:  26 - 28.11.01 (3 days) Programmation TSX Premium 2 : 26 - 30.11.01 (5 jours) Autocad Migration support courses: a detail...

  11. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Contract Follow-up (F) : 30.10.01 (1/2 journée) The CERN Engineering Data Management System for Electronics Design :  30.10.01 (1 day) Nouveautés d'Excel 2000 : 5.11.01 (1/2 journée) UNIX pour non-programmeurs : 5 - 7.11.01 (3 jours) Introduction à Windows 2000 au CERN : 6.11.01 (1/2 journée) The Java programming language Level 1: 8 - 9.11.01 (2 days) LabView Base 1 : 12 - 14.11.01 (3 jours) LabVIEW DAQ (F) : 15 & 16.11.01 (2 jours) Automates et réseaux de terrain : 13 & 14.11.01 (2 jours) Introduction to PERL 5 :  15 - 16.11.01  (2 days) LabVIEW - DAQ : 15 - 16.11.01 (2 jours) Introduction to XML :  19 - 20.11.01 (2 days) Introduction to C Programming :  21- 23.11.01 (3 days) Programmation TSX Premium 2 : 26 - 30.11.01 (5 jours) Object-Oriented Analysis and Design :  27 - 30.11.2001 (4 days) Hands...

  12. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Nouveautés d'EXCEL : 5.11.01 (1/2 journée) Introduction a Windows 2000 au CERN : 6.11.01 (1/2 journée) UNIX pour non-programmeurs : 5 - 7.11.01 (3 jours) Design Patterns :  7 - 8.11.01 (2 days) The Java programming language Level 1: 8 - 9.11.01 (2 days) Automates et réseaux de terrain : 13 & 14.11.01 (3 jours) Introduction à Windows 2000 au CERN : 12 - 14.11.01 (1/2 journée) Introduction to Windows 2000 at CERN :  14.11.01  (half-day) Introduction to PERL 5 :  15 - 16.11.01  (2 days) Introduction to C Programming :  21- 23.11.01 (3 days) Programmation TSX Premium 2 : 26 - 30.11.01 (5 jours) Contract Follow-up (F) : 26.11.01 (1/2 journée) Object-Oriented Analysis and Design :  27 - 30.11.2001  (4 days) Hands-on Object-Oriented Design and Programming with C++ :  11 - 13.12.2...

  13. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: ELEC-2002 : Spring Term :  9, 11, 16, 18, 23, 25, 30.4.02 (7 * 2.5 hours) Object-Oriented Analysis & Design: 16 - 19.4.02  (4 days) The CERN Engineering Data Management System for Advanced users:  16.4.02  (1 day) Migration from AutoCAD 14 towards AutoCAD Mechanical6 PowerPack:  17 - 19.4 and 2 &3.5.02  (5 days) AutoCAD - niveau 1 : 22, 23, 29, 30.4 et 6, 7.5.02 (6 jours) LabVIEW base 1 : 22 - 24.4.02 (3 jours) CLEAN 2002 : working in a cleanroom:  24.4.02  (half-day, pm) LabVIEW DSC (F) 25 & 26.4.02 (2 jours) AutoCAD : Mise à jour AutoCAD r-14 vers 2002 : 25 & 26.4.02 (2 jours) Cotations selon les normes GPS de l'ISO : 29 - 30.4.02 (2 jours) Introduction to the CERN Engineering Data Management System:  7.5.02  (1 day) LabVIEW Basics 2 : 13 & 14.5.02 (2 days) AutoCAD Mechanical 6 PowerPack (F) : 13-...

  14. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: Introduction to the CERN Engineering Data Management System:  7.5.02  (1 day) LabVIEW Basics 2: 13 & 14.5.02 (2 days) AutoCAD Mechanical 6 PowerPack (F) : 13-14, 17, 21, 27-28.5.02 (6 jours) WorldFIP - Généralités : 14.5.2002 (1/2 journée) WorldFIP - Développer avec MicroFIP HANDLER : 14.5 - après-midi, 15.5.02 - matin (1 jour) WorldFIP - FullFIP FDM : FIP Device Manager (F) : 15.5 - après-midi, 16.5.02 - matin (1 jour) LabVIEW DAQ (F) : 15 & 16.5.02 (2 jours) EXCEL 2000 - niveau 2 : 22 & 23.5.02 (2 jours) The CERN Engineering Data Management System for Advanced users:  30.5.02  (1 day) LabVIEW Basics 1:  3 - 5.6.02  (3 days) AutoCAD 2002 - condensé : 4 - 6.6.02 (3 jours) LabVIEW DAQ (E):  6 & 7.6.02  (2 days) AutoCAD 2002 - Level 1:  10 - ...

  15. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: The CERN Engineering Data Management System for Advanced users : 16.4.02  (1 day) Migration from AutoCAD 14 towards AutoCAD Mechanical6 PowerPack:  17 - 19.4 and 2 &3.5.02  (5 days) AutoCAD - niveau 1 : 22, 23, 29, 30.4 et 6, 7.5.02 (6 jours) LabVIEW base 1 : 22 - 24.4.02 (3 jours) CLEAN 2002 : working in a cleanroom:  24.4.02  (half-day, pm) LabVIEW DSC (F) 25 & 26.4.02 (2 jours) AutoCAD : Mise à jour AutoCAD r-14 vers 2002 : 25 & 26.4.02 (2 jours) Cotations selon les normes GPS de l'ISO : 29 - 30.4.02 (2 jours) Introduction to the CERN Engineering Data Management System:  7.5.02  (1 day) LabVIEW Basics 2: 13 & 14.5.02 (2 days) AutoCAD Mechanical 6 PowerPack (F) : 13-14, 17, 21, 27-28.5.02 (6 jours) WorldFIP - Généralités : 14.5.2002 (1/2 journée) WorldFIP - Développer avec Micr...

  16. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: LabVIEW Basics 2: 13 & 14.5.02 (2 days) WorldFIP - Généralités : 14.5.2002 (1/2 journée) WorldFIP - Développer avec MicroFIP HANDLER : 14.5 - après-midi, 15.5.02 - matin (1 jour) WorldFIP - FullFIP FDM : FIP Device Manager (F) : 15.5 - après-midi, 16.5.02 - matin (1 jour) LabVIEW DAQ (F) : 15 & 16.5.02 (2 jours) EXCEL 2000 - niveau 2 : 22 & 23.5.02 (2 jours) The CERN Engineering Data Management System for Advanced users:  30.5.02  (1 day) LabVIEW Basics 1:  3 - 5.6.02  (3 days) AutoCAD 2002 - condensé : 4 - 6.6.02 (3 jours) LabVIEW DAQ (E):  6 & 7.6.02  (2 days) AutoCAD 2002 - Level 1:  10 - 12 and 24 - 26.6.02  (6 days) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the c...

  17. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: LabVIEW base 1 : 22 - 24.4.02 (3 jours) CLEAN 2002 : working in a cleanroom:  24.4.02  (half-day, pm) LabVIEW DSC (F) 25 & 26.4.02 (2 jours) AutoCAD : Mise à jour AutoCAD r-14 vers 2002 : 25 & 26.4.02 (2 jours) Cotations selon les normes GPS de l'ISO : 29 - 30.4.02 (2 jours) Introduction to the CERN Engineering Data Management System:  7.5.02  (1 day) LabVIEW Basics 2: 13 & 14.5.02 (2 days) AutoCAD Mechanical 6 PowerPack (F) : 13-14, 17, 21, 27-28.5.02 (6 jours) WorldFIP - Généralités : 14.5.2002 (1/2 journée) WorldFIP - Développer avec MicroFIP HANDLER : 14.5 - après-midi, 15.5.02 - matin (1 jour) WorldFIP - FullFIP FDM : FIP Device Manager (F) : 15.5 - après-midi, 16.5.02 - matin (1 jour) LabVIEW DAQ (F) : 15 & 16.5.02 (2 jours) EXCEL 2000 - niveau 2 : 22 & 23.5.02 (2 jours)...

  18. ‘We are a community [but] that takes a certain amount of energy’: Exploring shared visions, social action, and resilience in place-based community-led energy initiatives

    International Nuclear Information System (INIS)

    Parkhill, K.A.; Shirani, F.; Butler, C.; Henwood, K.L.; Groves, C.; Pidgeon, N.F.

    2015-01-01

    Highlights: • We engage with conceptual characteristics of 3 community-led energy case studies. • We examine data from interviews to explore the issues community energy groups face. • Shared visions, social action and social resilience are important to community energy. • Creating and maintaining shared visions, social action and social resilience is extremely challenging. - Abstract: In UK energy policy, community-led energy initiatives are increasingly being imbued with transformative power to facilitate low carbon transitions. The ways that such expectations for communities are manifesting in practice remains, however, relatively poorly understood. In particular, key conceptual developments in unpacking what constitutes ‘community’ that highlight the significance of ‘place’ along with important characteristics, such as shared visions, collective social action, and resilience, have yet to be comprehensively explored in the context of community-led energy initiatives. This paper uses an interpretive stance to engage with these conceptual ideas about community and provides insights into the nature of community and its meaning for developing energy-related initiatives and realising the wider goals of energy policy. The paper draws on data from in-depth qualitative, longitudinal interviews undertaken in two residential communities and one purely workplace-based community, which are engaged in community energy initiatives. We argue that there are difficulties and ambiguities in creating shared visions, achieving social action, and developing resilience that are related to the specificities of community in place, but that all three characteristics are likely to be important for the making of sustainable places

  19. Hazardous solvent substitution

    International Nuclear Information System (INIS)

    Twitchell, K.E.

    1995-01-01

    This article is an overview of efforts at INEL to reduce the generation of hazardous wastes through the elimination of hazardous solvents. To aid in their efforts, a number of databases have been developed and will become a part of an Integrated Solvent Substitution Data System. This latter data system will be accessible through Internet

  20. Brand new authentic places

    DEFF Research Database (Denmark)

    Stender, Marie

    the relation and interplay between the two. This study strives to fill this gap by ethnographically tracing the process from design to occupancy including the role of branding as a means to create authenticity. The concept of authenticity is often associated with old houses and neighbourhoods, but also in new......How are places and material surroundings ascribed with meaning when new residential neighbourhoods are designed, branded and taken into use? Existing research on housing, neighbourhoods and urban design tends to take the perspective of either the architect or the user rather than to explore...... neighbourhoods stories of authenticity seems to be of great importance giving value and identity to place and people. By way of design and branding new places are implied with notions of the real, the original and the unique referring to e.g. its historical past, architectural uniqueness, sustainability or sense...

  1. Places disponibles/Places available

    CERN Multimedia

    2004-01-01

    Si vous désirez participer à l'un des cours suivants, veuillez en discuter avec votre superviseur et vous inscrire électroniquement en direct depuis les pages de description des cours dans le Web que vous trouvez à l'adresse : http://www.cern.ch/Training/ ou remplissez une « demande de formation » disponible auprès du Secrétariat de votre Division ou de votre DTO (Délégué divisionnaire à la formation). Les places seront attribuées dans l'ordre de réception des inscriptions. If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Off...

  2. Method of purifying phosphoric acid after solvent extraction

    International Nuclear Information System (INIS)

    Kouloheris, A.P.; Lefever, J.A.

    1979-01-01

    A method of purifying phosphoric acid after solvent extraction is described. The phosphoric acid is contacted with a sorbent which sorbs or takes up the residual amount of organic carrier and the phosphoric acid separated from the organic carrier-laden sorbent. The method is especially suitable for removing residual organic carrier from phosphoric acid after solvent extraction uranium recovery. (author)

  3. THE EFFECT OF SULPHURIC ACID CONCENTRATION ON SOLVENT EXTRACTION OF ReO4 - BY THE LONG-CHAIN ALIPHATIC TERTIARY AMINES AND ALCOHOLS

    Directory of Open Access Journals (Sweden)

    Aleksander G. Kasikov

    2010-06-01

    Full Text Available The effect of sulphuric acid concentration on solvent extraction of ReO4- by the long-chain aliphatic tertiary amines and alcohols in a wide range of H2SO4 concentrations in initial solutions is discussed. It has been established that the influence of the sulphuric acid concentration on rhenium solvent extraction is largely due to the extraction process mechanism. In the case of the anion-exchange mechanism, ReO4- is best extracted from weakly acidic solutions, whereas when the hydrate-solvate mechanism takes place – from solutions containing 4-7 mole/l H2SO4.

  4. What is taking place in science classrooms?: A case study analysis of teaching and learning in seventh-grade science of one Alabama school and its impact on African American student learning

    Science.gov (United States)

    Norman, Lashaunda Renea

    This qualitative case study investigated the teaching strategies that improve science learning of African American students. This research study further sought the extent the identified teaching strategies that are used to improve African American science learning reflect culturally responsive teaching. Best teaching strategies and culturally responsive teaching have been researched, but there has been minimal research on the impact that both have on science learning, with an emphasis on the African American population. Consequently, the Black-White achievement gap in science persists. The findings revealed the following teaching strategies have a positive impact on African American science learning: (a) lecture-discussion, (b) notetaking, (c) reading strategies, (d) graphic organizers, (e) hands-on activities, (f) laboratory experiences, and (g) cooperative learning. Culturally responsive teaching strategies were evident in the seventh-grade science classrooms observed. Seven themes emerged from this research data: (1) The participating teachers based their research-based teaching strategies used in the classroom on all of the students' learning styles, abilities, attitudes towards science, and motivational levels about learning science, with no emphasis on the African American student population; (2) The participating teachers taught the state content standards simultaneously using the same instructional model daily, incorporating other content areas when possible; (3) The participating African American students believed their seventh-grade science teachers used a variety of teaching strategies to ensure science learning took place, that science learning was fun, and that science learning was engaging; (4) The participating African American students genuinely liked their teacher; (5) The participating African American students revealed high self-efficacy; (6) The African American student participants' parents value education and moved to Success Middle School

  5. Solvent - solute interaction

    International Nuclear Information System (INIS)

    Urbanczyk, A.; Kalinowski, M.K.

    1983-01-01

    The electronic absorption spectrum of vanadyl acetylacetonate has been studied in 15 organic solvents. It has been found that wavenumbers and molar absorptivities of the long-wavelength bands (d-d transitions) can be well described by a complementary Lewis acid-base model including Gutmann's donor number [Gutmann V., Wychera E., Inorg. Nucl. Chem. Letters 2, 257 (1966)] and acceptor number [Mayer U., Gutmann V., Gerger W., Monatsh. Chem. 106, 1235 (1975)] of a solvent. This model describes also the solvent effect of the hyperfine splitting constant, Asub(iso)( 51 V), from e.s.r. spectra of VOacac 2 . These observations are discussed in terms of the donor-acceptor concept for solvent-solute interactions. (Author)

  6. Ionic Liquids Beyond Simple Solvents: Glimpses at the State of the Art in Organic Chemistry.

    Science.gov (United States)

    Kuchenbuch, Andrea; Giernoth, Ralf

    2015-12-01

    Within the last 25 years ionic liquids have written a tremendous success story, which is documented in a nearly uncountable amount of original research papers, reviews, and numerous applications in research and industry. These days, ionic liquids can be considered as a mature class of compounds for many different applications. Frequently, they are used as neoteric solvents for chemical tansformations, and the number of reviews on this field of research is huge. In this focused review, though, we are trying to evaluate the state of the art of ionic liquid chemistry beyond using them simply as solvents for chemical transformations. It is not meant to be a comprehensive overview on the topic; the choice of emphasis and examples rather refects the authors' personal view on the field. We are especially highlighting fields in which we believe the most fundamental developments within the next five years will take place: biomass processing, (chiral) ionic liquids from natural sources, biotransformations, and organic synthesis.

  7. Association of solvent extraction and liquid-liquid flotation processes for metal recovery

    International Nuclear Information System (INIS)

    Puget, Flavia P.; Mendonca, Luciano A. de; Massarani, Giulio

    2000-01-01

    From the batch solvent extraction process, in this work it has been carried out a preliminary study aiming the determination of the optimal operating conditions for zirconium recovery (10 ppm) using alamine 336 (tricaprylylamine) as extractor. The results have shown that the extraction takes place instantaneously (5s of manual agitation) and that at pH around 2.0 the extraction efficiency is up to 98-99% for an aqueous/organic phase volumetric ratio of 10. Based on these results, it is proposed to evaluate the possibility of using of a pioneering technology for metal recovery at low concentrations, using a experimental set-up that associates standard solvent extraction process with liquid-liquid flotation process. (author)

  8. Take heart!

    CERN Multimedia

    Alizée Dauvergne

    2010-01-01

    Recently, ten new semi-automatic defibrillators were installed at various locations around CERN. This is a preventive measure intended to provide cardiac arrest victims with the best possible response. The first responder could be you!   The Director-General has welcomed the initiative of the Medical Service and Fire Brigade for the installation of ten new semi-automatic defibrillators. You have probably seen them on your way to the restaurant, for example:  brand new semi-automatic defibrillators, ready for an emergency. Housed in a white wall-mounted case, the bright red defibrillators are marked with a white heart symbol crossed by a lightning bolt (see photo). The defibrillator is designed so that anyone can use it. “Anyone can use it, you don’t need to be a health professional,” says Dr Reymond from CERN's Medical Service. Together with the CERN Fire Brigade, he is behind the initiative to have these units put in place. And with good reason, as the unit...

  9. Taking Leave?

    CERN Multimedia

    2000-01-01

    Planning a holiday? Then if you're a member of the personnel, you'll need to use the Laboratory's new leave system that will be put in place on 1 October. Leave allocations don't change - you are entitled to just as much holiday as before - but instead of being credited annually, your leave will be credited on a monthly basis, and this information will be communicated on your salary slip. The reason for the change is that with the various new leave schemes such as Recruitment by Saved Leave (RSL) and the Progressive Retirement Programme (PRP), a streamlined procedure was required for dealing with all kinds of leave. In the new system, each member of the personnel will have leave accounts to which leave will be credited monthly from the payroll and debited each time an absence is registered in the CERN Electronic Document Handling system (EDH). Leave balances will appear on monthly pay slips, and full details of leave transactions and balances will be available through EDH at all times. As the leave will be c...

  10. Purex process solvent: literature review

    Energy Technology Data Exchange (ETDEWEB)

    Geier, R.G.

    1979-10-01

    This document summarizes the data on Purex process solvent presently published in a variety of sources. Extracts from these various sources are presented herein and contain the work done, the salient results obtained, and the original, unaltered conclusions of the author of each paper. Three major areas are addressed: solvent stability, solvent quality testing, and solvent treatment processes. 34 references, 44 tables.

  11. Purex process solvent: literature review

    International Nuclear Information System (INIS)

    Geier, R.G.

    1979-10-01

    This document summarizes the data on Purex process solvent presently published in a variety of sources. Extracts from these various sources are presented herein and contain the work done, the salient results obtained, and the original, unaltered conclusions of the author of each paper. Three major areas are addressed: solvent stability, solvent quality testing, and solvent treatment processes. 34 references, 44 tables

  12. Solvent influence during radiation induced grafting of styrene in PVDF

    International Nuclear Information System (INIS)

    Ferreira, Henrique P.; Parra, Duclerc F.; Lugao, Ademar B.

    2013-01-01

    Radiation-induced grafting was studied to produce styrene grafted poly(vinylidene fluoride) (PVDF) membranes. PVDF films with 0.125 mm thickness were irradiated at doses between 5 and 20 kGy in the presence of styrene/N,N-dimethylformamide (DMF), styrene/acetone or styrene/toluene solutions (1:1, v/v) at dose rate of 5 kGy h -1 by simultaneous method, using gamma rays from a Co-60, under nitrogen atmosphere and at room temperature. The films were characterized before and after modification by grafting yield (GY %), infrared spectroscopy (FT-IR), scanning electron microscopy (SEM and EDS), differential scanning calorimetry (DSC) and thermogravimetry (TG/DTG). GY results shows that grafting increases with dose and toluene hinders the grafting, leading to a small GY comparing to DMF and acetone. It was possible to confirm the grafting of styrene by FT-IR due to the new characteristics peaks and by the TG and DSC due to changes in thermal behavior of the grafted material. SEM and EDS show surface and cross-section distribution of the grafting, which takes place on the surface and heterogeneously with toluene as solvent and homogeneously and penetrating into the inner layers of the matrix using DMF and acetone as solvent. (author)

  13. Solvent influence during radiation induced grafting of styrene in PVDF

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Henrique P.; Parra, Duclerc F.; Lugao, Ademar B., E-mail: hp.ferreira@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    Radiation-induced grafting was studied to produce styrene grafted poly(vinylidene fluoride) (PVDF) membranes. PVDF films with 0.125 mm thickness were irradiated at doses between 5 and 20 kGy in the presence of styrene/N,N-dimethylformamide (DMF), styrene/acetone or styrene/toluene solutions (1:1, v/v) at dose rate of 5 kGy h{sup -1} by simultaneous method, using gamma rays from a Co-60, under nitrogen atmosphere and at room temperature. The films were characterized before and after modification by grafting yield (GY %), infrared spectroscopy (FT-IR), scanning electron microscopy (SEM and EDS), differential scanning calorimetry (DSC) and thermogravimetry (TG/DTG). GY results shows that grafting increases with dose and toluene hinders the grafting, leading to a small GY comparing to DMF and acetone. It was possible to confirm the grafting of styrene by FT-IR due to the new characteristics peaks and by the TG and DSC due to changes in thermal behavior of the grafted material. SEM and EDS show surface and cross-section distribution of the grafting, which takes place on the surface and heterogeneously with toluene as solvent and homogeneously and penetrating into the inner layers of the matrix using DMF and acetone as solvent. (author)

  14. Separation by solvent extraction

    International Nuclear Information System (INIS)

    Holt, C.H. Jr.

    1976-01-01

    In a process for separating fission product values from U and Pu values contained in an aqueous solution, an oxidizing agent is added to the solution to secure U and Pu in their hexavalent state. The aqueous solution is contacted with a substantially water-immiscible organic solvent with agitation while the temperature is maintained at from -1 to -2 0 C until the major part of the water present is frozen. The solid ice phase is continuously separated as it is formed and a remaining aqueous liquid phase containing fission product values and a solvent phase containing Pu and U values are separated from each other. The last obtained part of the ice phase is melted and added to the separated liquid phase. The resulting liquid is treated with a new supply of solvent whereby it is practically depleted of U and Pu

  15. Effects of solvent and structure on the reactivity of 6-substituted nicotinic acids with diazodiphenylmethane in aprotic solvents

    Directory of Open Access Journals (Sweden)

    BRATISLAV Ž. JOVANOVIĆ

    2009-12-01

    Full Text Available The rate constants for the reactions of diazodiphenylmethane (DDM with 6-substituted nicotinic acids in aprotic solvents at 30 °C were determined. The obtained second order rate constants in aprotic solvents, together with literature data for benzoic and nicotinic acids in protic solvents, were used for the calculation of solvent effects, employing the Kamlet-Taft solvatochromic equation (linear solvation energy relationship – LSER in the form: log k = log k0 + s* + a + b. The correlations of the kinetic data were performed by means of multiple linear regression analysis taking appropriate solvent parameters. The sign of the equation coefficients (s, a and b were in agreement with the postulated reaction mechanism, and the mode of the solvent influences on the reaction rate is discussed based on the correlation results. A similar contribution of the non-specific solvent effect and electrophilic solvation was observed for all acids, while the highest contribution of nucleophilic solvation was influenced by their high acidity. Correlation analysis of the rate data with substituent p parameters in an appropriate solvent using the Hammett equation was also performed. The substituent effect on the acid reactivity was higher in aprotic solvents of higher dipolarity/polarizability. The mode of the transmission of the substituent effect is discussed in light of the contribution of solute–solvent interaction on the acid reactivity.

  16. I could never take the place of your man

    DEFF Research Database (Denmark)

    Andersen, Poul Houman; Munksgaard, Kristin B.

    We explore the dynamic tensions between the strategic change intentions by business actors and the rigidities of routines in business networks. We capture strategic change acts using the recent advances in the literature on network pictures as way to understand the value creation logics of managers...... and we coin the term network picturing to describe this process. We develop a theoretical framework that links network pictures and the patterned processes of interaction in business network routines. Here, we argue that the resistance managers' meet in their change efforts is likely, even if the change...... efforts do not directly rival or contradict that of other actors in the exchange party in a resource-dependency sense, but may be caused simply by disrupting the existing business network. We use three case studies to illustrate and further explore the tensions between network picturing and network...

  17. How Does Photosynthesis Take Place in Our Oceans?

    OpenAIRE

    Ghosh, Tonmoy; Mishra, Sandhya

    2017-01-01

    The food we eat ultimately comes from plants, either directly or indirectly. The importance of plants as the global kitchen can never be underestimated. Plants “eat” sunlight and carbon dioxide to produce their own food and food for the millions of other organisms dependent on them. A molecule, chlorophyll (Chl), is crucial for this process, since it absorbs sunlight. However, the way land plants produce their food is very different from the way plants in the oceans produce their food. Since ...

  18. When radionuclides take the place of vital elements

    International Nuclear Information System (INIS)

    Rouffignac, Ch. de; Poncy, J.L.; Martin, M.

    2003-01-01

    The radiosensitivity of the kidneys is a major factor restricting the applications of chemoradiotherapy. However, improved knowledge of the mechanisms involved has allowed new treatments to be developed that attenuate the effects of the irradiation or delay its consequences. Certain radioactive elements can behave in the body like calcium, and so exhibit a special affinity for bone structures. The skin is the first tissue that is damaged by external exposure to ionising radiation. The early and late responses to irradiation in this complex organ are still poorly understood. Thanks to DNA micro-arrays, the response of skin cells to irradiation, and in particular that of epidermal stem cells, can now be studied globally. (authors)

  19. Does the measurement take place when nobody observes it

    Energy Technology Data Exchange (ETDEWEB)

    Gurvitz, Shmuel [Department of Particle Physics and Astrophysics, Weizmann Institute of Science, Rehovot (Israel); Beijing Computational Science Research Center, Beijing (China)

    2017-06-15

    We consider non-selective continuous measurements of a particle tunneling to a reservoir of finite band-width (Λ). The particle is continuously monitored by frequent projective measurements (''quantum trajectory''), separated by a time-interval τ. A simple analytical expression for the decay rate has been obtained. For Markovian reservoirs (Λ → ∞), no effect of the measurements is found. Otherwise for a finite Λ, the decay rate always depends on the measurement time τ. This result is compared with alternative calculations, with no intermediate measurements, but when the measurement device is included in the Schroedinger evolution. We found that the detector affects the system by the decoherence rate (Γ{sub d}), related to the detector's signal. Although both treatments are different, the final results become very close for τ = 2/Γ{sub d}. This τ corresponds to the minimal time for which the detector's signal can be distinguished by an ''observer''. This indicates a fundamental role of information in quantum motion and can be used for the extension of the quantum trajectory method for non-Markovian environments. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. BP-Mobil partnership. The common network takes place

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    After the partnership between BP and Mobil was signed, the program of transformation of the petrol stations network started in November 1996 in the UK and concern 3300 stations in Europe and 800 stations in France. About 9100 stations will be transformed by the end of 1998. BP France is the operator for petroleum products (petrol, fuel, bitumens, LPG..) with a 70% share holding (30% for Mobil) while Mobil is the major shareholder (51%) for the lubricants and special products activities. The chemical, aviation nd maritime activities are not concerned. Thanks to the fusion of their down-file activities in Europe, the benefits of the partnership should reach 600 to 700 million of US Dollars each year. However the restructuring cost should reach 740 millions of US Dollars in two years, which doubles the initial estimation. Short paper. (J.S.)

  1. Perspective Taking in Workplaces

    Directory of Open Access Journals (Sweden)

    Zappalà Salvatore

    2014-07-01

    Full Text Available Workplaces are often described as places in which individuals are motivated by their self-interests and in which negative events like time pressure, anxiety, conflict with co-workers, miscomprehensions, difficulties in solving problems, not-transmitted or not-exchanged information that lead to mistakes, and in some cases to injuries, stress or control, are part of everyday life (Dormann & Zapf, 2002; Schabracq, Winnubst and Cooper, 2003. Such situations are often the result of the limited comprehension of needs, skills, or information available to colleagues, supervisors, subordinates, clients or providers. However, workplaces are also places in which employees take care of clients, support colleagues and subordinates (Rhoades & Eisenberger, 2002, are enthusiastic about their job (Bakker et al., 2008, are motivated by leaders that encourage employees to transcend their own self-interests for the good of the group or the organization and provide them with the confidence to perform beyond expectations (Bass, 1997. Thus positive relationships at work are becoming a new interdisciplinary domain of inquiry (Dutton & Ragins, 2006. Within this positive relationships framework, in this paper we focus on a positive component of workplaces, and particularly on an individual cognitive and emotional process that has an important role in the workplace because it facilitates interpersonal relations and communications: it is the perspective taking process. In order to describe perspective taking, we will refer to some empirical studies and particularly to the review published by Parker, Atkins and Axtell in 2008 on the International Review of Industrial and Organizational Psychology.

  2. Organic solvent topical report

    Energy Technology Data Exchange (ETDEWEB)

    COWLEY, W.L.

    1999-05-13

    This report provides the basis for closing the organic solvent safety issue. Sufficient information is presented to conclude that risk posed by an organic solvent fire is within risk evaluation guidelines. This report updates information contained in Analysis of Consequences of Postulated Solvent Fires in Hanford Site Waste Tanks. WHC-SD-WM-CN-032. Rev. 0A (Cowley et al. 1996). However, this document will not replace Cowley et al (1996) as the primary reference for the Basis for Interim Operation (BIO) until the recently submitted BIO amendment (Hanson 1999) is approved by the US Department of Energy. This conclusion depends on the use of controls for preventing vehicle fuel fires and for limiting the use of flame cutting in areas where hot metal can fall on the waste surface.The required controls are given in the Tank Waste Remediation System Technical Safety Requirements (Noorani 1997b). This is a significant change from the conclusions presented in Revision 0 of this report. Revision 0 of this calcnote concluded that some organic solvent fire scenarios exceeded risk evaluation guidelines, even with controls imposed.

  3. Organic solvent topical report

    Energy Technology Data Exchange (ETDEWEB)

    Cowley, W.L.

    1998-04-30

    This report is the technical basis for the accident and consequence analyses used in the Hanford Tank Farms Basis for Interim Operation. The report also contains the scientific and engineering information and reference material needed to understand the organic solvent safety issue. This report includes comments received from the Chemical Reactions Subcommittee of the Tank Advisory Panel.

  4. Organic solvent topical report

    International Nuclear Information System (INIS)

    COWLEY, W.L.

    1999-01-01

    This report provides the basis for closing the organic solvent safety issue. Sufficient information is presented to conclude that risk posed by an organic solvent fire is within risk evaluation guidelines. This report updates information contained in Analysis of Consequences of Postulated Solvent Fires in Hanford Site Waste Tanks. WHC-SD-WM-CN-032. Rev. 0A (Cowley et al. 1996). However, this document will not replace Cowley et al (1996) as the primary reference for the Basis for Interim Operation (BIO) until the recently submitted BIO amendment (Hanson 1999) is approved by the US Department of Energy. This conclusion depends on the use of controls for preventing vehicle fuel fires and for limiting the use of flame cutting in areas where hot metal can fall on the waste surface.The required controls are given in the Tank Waste Remediation System Technical Safety Requirements (Noorani 1997b). This is a significant change from the conclusions presented in Revision 0 of this report. Revision 0 of this calcnote concluded that some organic solvent fire scenarios exceeded risk evaluation guidelines, even with controls imposed

  5. Organic solvent topical report

    International Nuclear Information System (INIS)

    Cowley, W.L.

    1998-01-01

    This report is the technical basis for the accident and consequence analyses used in the Hanford Tank Farms Basis for Interim Operation. The report also contains the scientific and engineering information and reference material needed to understand the organic solvent safety issue. This report includes comments received from the Chemical Reactions Subcommittee of the Tank Advisory Panel

  6. DESIGNING GREENER SOLVENTS

    Science.gov (United States)

    Computer-aided design of chemicals and chemical mixtures provides a powerful tool to help engineers identify cleaner process designs and more-benign alternatives to toxic industrial solvents. Three software programs are discussed: (1) PARIS II (Program for Assisting the Replaceme...

  7. Improvements in solvent extraction columns

    International Nuclear Information System (INIS)

    Aughwane, K.R.

    1987-01-01

    Solvent extraction columns are used in the reprocessing of irradiated nuclear fuel. For an effective reprocessing operation a solvent extraction column is required which is capable of distributing the feed over most of the column. The patent describes improvements in solvent extractions columns which allows the feed to be distributed over an increased length of column than was previously possible. (U.K.)

  8. Solvent extraction columns

    International Nuclear Information System (INIS)

    Middleton, P.; Smith, J.R.

    1979-01-01

    In pulsed columns for use in solvent extraction processes, e.g. the reprocessing of nuclear fuel, the horizontal perforated plates inside the column are separated by interplate spacers manufactured from metallic neutron absorbing material. The spacer may be in the form of a spiral or concentric circles separated by radial limbs, or may be of egg-box construction. Suitable neutron absorbing materials include stainless steel containing boron or gadolinium, hafnium metal or alloys of hafnium. (UK)

  9. Hazardous solvent substitution

    International Nuclear Information System (INIS)

    Twitchell, K.E.

    1995-01-01

    Eliminating hazardous solvents is good for the environment, worker safety, and the bottom line. However, even though we are motivated to find replacements, the big question is 'What can we use as replacements for hazardous solvents?'You, too, can find replacements for your hazardous solvents. All you have to do is search for them. Search through the vendor literature of hundreds of companies with thousands of products. Ponder the associated material safety data sheets, assuming of course that you can obtain them and, having obtained them, that you can read them. You will want to search the trade magazines and other sources for product reviews. You will want to talk to users about how well the product actually works. You may also want to check US Environmental Protection Agency (EPA) and other government reports for toxicity and other safety information. And, of course, you will want to compare the product's constituent chemicals with the many hazardous constituency lists to ensure the safe and legal use of the product in your workplace

  10. SOLVENT FIRE BY-PRODUCTS

    Energy Technology Data Exchange (ETDEWEB)

    Walker, D; Samuel Fink, S

    2006-05-22

    Southwest Research Institute (SwRI) conducted a burn test of the Caustic-Side Solvent Extraction (CSSX) solvent to determine the combustion products. The testing showed hydrogen fluoride gas is not a combustion product from a solvent fire when up to 70% of the solvent is consumed. The absence of HF in the combustion gases may reflect concentration of the modifier containing the fluoride groups in the unburned portion. SwRI reported results for other gases (CO, HCN, NOx, formaldehyde, and hydrocarbons). The results, with other supporting information, can be used for evaluating the consequences of a facility fire involving the CSSX solvent inventory.

  11. Method to convert biomass to 5-(hydroxymethyl)-furfural (HMF) and furfural using lactones, furans, and pyrans as solvents

    Science.gov (United States)

    Dumesic, James A.; Ribeiro Gallo, Jean Marcel; Alonso, David

    2014-07-08

    Described is a process to produce hydroxymethyl furfural (HMF) from biomass-derived sugars. The process includes the steps of reacting a C5 and/or C6 sugar-containing reactant derived from biomass in a monophasic or biphasic reaction solution comprising water and a co-solvent. The co-solvent can be beta-, gamma-, and/or delta-lactones derived from biomass, tetrahydrofuran (THF) derived from biomass, and/or methyltetrahydrofuran (MTHF) derived from biomass. The reaction takes place in the presence of an acid catalyst and a dehydration catalyst for a time and under conditions such that at least a portion of glucose or fructose present in the reactant is converted to HMF.

  12. Diluent effects in solvent extraction. The Effects of Diluents in Solvent Extraction - a literature study

    International Nuclear Information System (INIS)

    Loefstroem-Engdahl, Elin; Aneheim, Emma; Ekberg, Christian; Foreman, Mark; Skarnemark, Gunnar

    2010-01-01

    The fact that the choice of organic diluent is important for a solvent extraction process goes without saying. Several factors, such as e.g. price, flash point, viscosity, polarity etc. each have their place in the planning of a solvent extraction system. This high number of variables makes the lack of compilations concerning diluent effects to an interesting topic. Often the interest for the research concerning a specific extraction system focuses on the extractant used and the complexes built up during an extraction. The diluents used are often classical ones, even if it has been shown that choice of diluent can affect extraction as well as separation in an extraction system. An attempt to point out important steps in the understanding of diluent effects in solvent extraction is here presented. This large field is, of course, not summarized in this article, but an attempt is made to present important steps in the understanding of diluents effects in solvent extraction. Trying to make the information concerning diluent effects and applications more easily accessible this review offers a selected summarizing of literature concerning diluents effects in solvent extraction. (authors)

  13. Place Branding in Systems of Place

    DEFF Research Database (Denmark)

    Zenker, Sebastian; Andéhn, Mikael

    2015-01-01

    , this presents a challenge, since the role of a place in this system of geographical abstractions constitutes a piece of information more vital than any other in defining the place. Our understanding of places cannot be separated from their scale, and any effort at managing the reputation and meaning.......g. the European Union or Africa). Using the example of nation branding for Sudan and Slovenia, one can identify supranational places such as “sub-Saharan Africa” or “Eastern Europe”, carrying their own highly salient and often negative meaning in much of the Western world. We explore how association to a system...

  14. Detection of solvent losses (entrainment) in gas streams of process vessels using radioisotope tracing techniques

    International Nuclear Information System (INIS)

    Wan Zakaria Wan Muhamad Tahir; Juhari Mohd Yusof

    2002-01-01

    Liquid droplets (MDEA aqueous solution) entrained in the gas streams can cause severe problems on chemical plants. On-line detection of liquid entrainment (carry over) into gas streams from process vessel is investigated using radioisotope iodine ( 131 I). In order to obtain information on whether there is any carry-over of MDEA in the vapour space leaving from the process system, a number of test and calibration injections involving the released of certain amount of tracer activity (mCi) at the inlet and overhead lines of the process vessels were made using a special injection device. MDEA solvent- tagged tracer in the overhead line of the designated process vessels was monitored using radiation scintillation detectors mounted externally at specified locations of the vessels. Output pulses (response curves) with respect to time of measurements from all detectors were plotted and analysed for the finger prints of solvent losses leaving the vessels. From this study, no distinguishable peaks were detected at the outlet vessels of the overhead lines. Thus, no significant MDEA solvent losses in the form of vapour being discovered along the gas streams due to the process taking place in the system. (Author)

  15. PHEA-PLA biocompatible nanoparticles by technique of solvent evaporation from multiple emulsions.

    Science.gov (United States)

    Cavallaro, Gennara; Craparo, Emanuela Fabiola; Sardo, Carla; Lamberti, Gaetano; Barba, Anna Angela; Dalmoro, Annalisa

    2015-11-30

    Nanocarriers of amphiphilic polymeric materials represent versatile delivery systems for poorly water soluble drugs. In this work the technique of solvent evaporation from multiple emulsions was applied to produce nanovectors based on new amphiphilic copolymer, the α,β-poly(N-2-hydroxyethyl)-DL-aspartamide-polylactic acid (PHEA-PLA), purposely synthesized to be used in the controlled release of active molecules poorly soluble in water. To this aim an amphiphilic derivative of PHEA, a hydrophilic polymer, was synthesized by derivatization of the polymeric backbone with hydrophobic grafts of polylactic acid (PLA). The achieved copolymer was thus used to produce nanoparticles loaded with α tocopherol (vitamin E) adopted as lipophilic model molecule. Applying a protocol based on solvent evaporation from multiple emulsions assisted by ultrasonic energy and optimizing the emulsification process (solvent selection/separation stages), PHEA-PLA nanostructured particles with total α tocopherol entrapment efficiency (100%), were obtained. The drug release is expected to take place in lower times with respect to PLA due to the presence of the hydrophilic PHEA, therefore the produced nanoparticles can be used for semi-long term release drug delivery systems. Copyright © 2015 Elsevier B.V. All rights reserved.

  16. Solvent effects in chemistry

    CERN Document Server

    Buncel, Erwin

    2015-01-01

    This book introduces the concepts, theory and experimental knowledge concerning solvent effects on the rate and equilibrium of chemical reactions of all kinds.  It begins with basic thermodynamics and kinetics, building on this foundation to demonstrate how a more detailed understanding of these effects may be used to aid in determination of reaction mechanisms, and to aid in planning syntheses. Consideration is given to theoretical calculations (quantum chemistry, molecular dynamics, etc.), to statistical methods (chemometrics), and to modern day concerns such as ""green"" chemistry, where ut

  17. Solvent effects in the synergistic solvent extraction of Co2+

    International Nuclear Information System (INIS)

    Kandil, A.T.; Ramadan, A.

    1979-01-01

    The extraction of Co 2+ from a 0.1M ionic strength aqueous phase (Na + , CH 3 COOH) of pH = 5.1 was studied using thenoyltrifluoroacetone, HTTA, in eight different solvents and HTTA + trioctylphosphine oxide, TOPO, in the same solvents. A comparison of the effect of solvent dielectric constant on the equilibrium constant shows a synergism as a result of the increased hydrophobic character imparted to the metal complex due to the formation of the TOPO adduct. (author)

  18. Solvent extraction of zirconium

    International Nuclear Information System (INIS)

    Kim, S.S.; Yoon, J.H.

    1981-01-01

    The extraction of zirconium(VI) from an aqueous solution of constant ionic strength with versatic acid-10 dissolved in benzen was studied as a function of pH and the concentration of zirconium(VI) and organic acid. The effects of sulphate and chlorine ions on the extraction of the zirconium(VI) were briefly examined. It was revealed that (ZrOR 2 .2RH) is the predominant species of extracted zirconium(VI) in the versatic acid-10. The chemical equation and the apparent equilibrium constants thereof have been determined as follows. (ZrOsup(2+))aq+ 2(R 2 H 2 )sub(org) = (ZrOR 2 .2RH)sub(org)+2(H + )aq Ksub(Zr) = (ZrOR 2 .2RH)sub(org)(H + ) 2 /(ZrOsup(2+))sub(aq)(R 2 H 2 )sup(2)sub(org) = 3.3 x 10 -7 . The synergistic effects of TBP and D2EHPA were also studied. In the mixed solvent with 0.1M TBP, the synergistic effect was observed, while the mixed solvent with D2EHPA showed the antisynergistic effect. (Author)

  19. Continuing bonds and place.

    Science.gov (United States)

    Jonsson, Annika; Walter, Tony

    2017-08-01

    Where do people feel closest to those they have lost? This article explores how continuing bonds with a deceased person can be rooted in a particular place or places. Some conceptual resources are sketched, namely continuing bonds, place attachment, ancestral places, home, reminder theory, and loss of place. The authors use these concepts to analyze interview material with seven Swedes and five Britons who often thought warmly of the deceased as residing in a particular place and often performing characteristic actions. The destruction of such a place, by contrast, could create a troubling, haunting absence, complicating the deceased's absent-presence.

  20. The reactivity of allyl and propargyl alcohols with solvated electrons: temperature and solvent effects

    International Nuclear Information System (INIS)

    Afanassiev, A.M.; Okazaki, K.; Freeman, G.R.

    1979-01-01

    The rate constants K 1 for the reaction of solvated electrons with allyl alcohol in a number of hydroxylic solvents differ by up to two orders of magnitude and decrease in the order tert-butyl alcohol > 2-propanol > l-propanol approximately ethanol > methanol approximately ethylene glycol > water. In methanol and ethylene glycol the rate constants (7 x 10 7 M -1 s -1 at 298 K) and activation energies (16 kJ/mol) are equal, in spite of a 32-fold difference in solvent viscosity (0.54 and 17.3 cP, respectively) and 3-fold difference in its activation energy (11 and 32 kJ/mol, respectively). The reaction in tert-butyl alcohol is nearly diffusion controlled and has a high activation energy that is characteristic of transport in that liquid (E 1 = 31 kJ/mol, E sub(eta) = 39 kJ/mol). The activation energies in the other alcohols are all 16 kJ/mol, and it is 14 kJ/mol in water. They do not correlate with transport properties. The solvent effect is connected primarily with the entropy of activation. The rate constants correlate with the solvated electron trap depth. When the electron affinity of the scavenger is small, a favorable configuration of solvent molecules about the electron/scavenger encounter pair is required for the electron jump to take place. The behavior of the rate parameters for propargyl alcohol is similar to that for allyl alcohol, but k 1 , A 1 , and E 1 are larger for the former. The ratio k(propargyl)/k(allyl) at 298 K equals 10.5 in water and decreases through the series, reaching 1.3 in tert-butyl alcohol. Rate parameters for several other scavengers are also reported. (author)

  1. Selective solvent extraction of oils

    Energy Technology Data Exchange (ETDEWEB)

    1938-04-09

    In the selective solvent extraction of naphthenic base oils, the solvent used consists of the extract obtained by treating a paraffinic base oil with a selective solvent. The extract, or partially spent solvent is less selective than the solvent itself. Selective solvents specified for the extraction of the paraffinic base oil are phenol, sulphur dioxide, cresylic acid, nitrobenzene, B:B/sup 1/-dichlorethyl ether, furfural, nitroaniline and benzaldehyde. Oils treated are Coastal lubricating oils, or naphthenic oils from the cracking, or destructive hydrogenation of coal, tar, lignite, peat, shale, bitumen, or petroleum. The extraction may be effected by a batch or counter-current method, and in the presence of (1) liquefied propane, or butane, or naphtha, or (2) agents which modify the solvent power such as, water, ammonia, acetonitrile, glycerine, glycol, caustic soda or potash. Treatment (2) may form a post-treatment effected on the extract phase. In counter-current treatment in a tower some pure selective solvent may be introduced near the raffinate outlet to wash out any extract therefrom.

  2. My Place Is Not Your Place

    DEFF Research Database (Denmark)

    Zenker, Sebastian; Beckmann, Suzanne C.

    2013-01-01

    Purpose – Cities increasingly compete with each other for attracting tourists, investors, companies, or residents. Marketers therefore focus on establishing the city as a brand, disregarding that the perception and knowledge of a city differ dramatically between the target audiences. Hence, place...... branding should emphasize much more the perceptions of the different target groups and develop strategies for advanced place brand management. The aim of this paper is to assess the important discrepancies between the city brand perceptions of different target groups with the help of network analysis......-ended-question survey with 334 participants. Findings – Structural differences for the city brand perceptions of two different target groups and the differences between perceptions of an external and internal target group are highlighted. The results and the managerial implications for place marketers are discussed...

  3. Selection and design of solvents

    DEFF Research Database (Denmark)

    Gani, Rafiqul

    and design of solvents will be presented together with application examples. The selection problem is defined as finding known chemicals that match the desired functions of a solvent for a specified set of applications. The design problem is defined as finding the molecular structure (or mixture of molecules....... With increasing interest on issues such as waste, sustainability, environmental impact and green chemistry, the selection and design of solvents have become important problems that need to be addressed during chemical product-process design and development. Systematic methods and tools suitable for selection......) that match the desired functions of a solvent for a specified set of applications. Use of organic chemicals and ionic liquids as solvents will be covered....

  4. Place branding, embeddedness and endogenous rural development

    NARCIS (Netherlands)

    Donner, Mechthild; Horlings, Lummina; Fort, Fatiha; Vellema, Sietze

    2017-01-01

    This article deals with place branding on the regional scale, in the rural context of food and tourism networks in Europe. Place branding is linked to the concepts of endogenous rural development, territory and embeddedness, by analysing how the valorisation of specific rural assets takes shape.

  5. Populated Places of Iowa

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — This coverage contains points that represent populated places, ie. cities, towns, villages or any other named place where people live. The coverage was developed...

  6. The importance of places and place branding

    NARCIS (Netherlands)

    Kovács, Z.; Musterd, S.; Musterd, S.; Kovács, Z.

    2013-01-01

    In the analytical part of this study, we highlight that, despite globalisation and growing uniformity, there is still an important role for place itself in the location decisions of economic players. Part III of this volume deals with this. Even though city-regions across the world have become

  7. Solvent extraction of Zn and metals in Zn ores by nonphosphorous solvents

    International Nuclear Information System (INIS)

    Auchapt, J.M.; Tostain, Jacqueline.

    1975-07-01

    This bibliography follows a first work on Zn solvent extraction by organo-phosphorous compounds. The other solvents used in Zn extraction, are studied: oxygenated nonphosphorous solvents (ketones, alcohols, carboxylic acids, sulfonates), nitrogenous solvents and hydrocarbons [fr

  8. A woman's rightful place?

    Science.gov (United States)

    1993-04-01

    Rural development projects in sub-Saharan Africa tend not to succeed because they do not consider women's role and their significance, even though women constitute 70% of agricultural workers, 80% of food producers, 100% of people who prepare meals, and 60-90% do food marketing. Development specialists ignore women because they are not involved in political activities and in decision making. As long as women and women's contributions are not considered, rural development projects will remain inefficient and development will not take place. Thus, projects must include women as agents and beneficiaries of development in key sectors of the economy. Rural development specialists must also consider the effect male labor emigration has on rural women. For example, drought has forced many men to leave their villages, leaving a work force consisting of 95% women to fight desertification. All too often, women have no or limited land ownership rights, thereby keeping them from improving the land, e.g., planting perennial fruit crops. They also tend to be hired hands rather than food producers. They cannot obtain bank loans because they do not own land, and because they are often illiterate (over 90% female illiteracy in 28 African countries), they can neither understand nor complete bank loan forms. Rural development projects further alienate women by aiming training programs to men or by using male agricultural extension agents. Women react to this alienation by rejecting projects that do not benefit them and follow more profitable activities which sometimes interfere with projects. Thus, rural development programs need to invest in women to ensure viable and efficient sustainable development.

  9. Cesium Concentration in MCU Solvent

    International Nuclear Information System (INIS)

    Walker, D

    2006-01-01

    During Modular Caustic-Side Solvent Extraction (CSSX) Unit (MCU) operations, Cs-137 concentrations in product streams will vary depending on the location in the process and on the recent process conditions. Calculations of cesium concentrations under a variety of operating conditions reveal the following: (1) Under nominal operations with salt solution feed containing 1.1 Ci Cs-137 per gallon, the maximum Cs-137 concentration in the process will occur in the strip effluent (SE) and equal 15-16.5 Ci/gal. (2) Under these conditions, the majority of the solvent will contain 0.005 to 0.01 Ci/gal, with a limited portion of the solvent in the contactor stages containing ∼4 Ci/gal. (3) When operating conditions yield product near 0.1 Ci Cs-137/gal in the decontaminated salt solution (DSS), the SE cesium concentration will be the same or lower than in nominal operations, but majority of the stripped solvent will increase to ∼2-3 Ci/gal. (4) Deviations in strip and waste stream flow rates cause the largest variations in cesium content: (a) If strip flow rates deviate by -30% of nominal, the SE will contain ∼23 Ci/gal, although the cesium content of the solvent will increase to only 0.03 Ci/gal; (b) If strip flow rate deviates by -77% (i.e., 23% of nominal), the SE will contain 54 Ci/gal and solvent will contain 1.65 Ci/gal. At this point, the product DSS will just reach the limit of 0.1 Ci/gal, causing the DSS gamma monitors to alarm; and (c) Moderate (+10 to +30%) deviations in waste flow rate cause approximately proportional increases in the SE and solvent cesium concentrations. Recovery from a process failure due to poor cesium stripping can achieve any low cesium concentration required. Passing the solvent back through the contactors while recycling DSS product will produce a ∼70% reduction during one pass through the contactors (assuming the stripping D value is no worse than 0.36). If the solvent is returned to the solvent hold tank (containing additional

  10. Taking warfarin (Coumadin)

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/patientinstructions/000292.htm Taking warfarin (Coumadin) To use the sharing features on this ... form a clot or have bleeding problems. Taking Warfarin It is important that you take warfarin exactly ...

  11. Take Charge. Take the Test. PSA (:30)

    Centers for Disease Control (CDC) Podcasts

    As part of the Take Charge. Take the Test. campaign, this 30 second PSA encourages African American women to get tested for HIV. Locations for a free HIV test can be found by visiting hivtest.org/takecharge or calling 1-800-CDC-INFO (1-800-232-4636).

  12. Recent Advances in Anhydrous Solvents for CO{sub 2} Capture: Ionic Liquids, Switchable Solvents, and Nanoparticle Organic Hybrid Materials

    Energy Technology Data Exchange (ETDEWEB)

    Park, Youngjune [School of Environmental Science and Engineering, Gwangju Institute of Science and Technology (GIST), Gwangju (Korea, Republic of); Lin, Kun-Yi Andrew [Department of Environmental Engineering, National Chung Hsing University, Taichung City (China); Park, Ah-Hyung Alissa, E-mail: ap2622@columbia.edu [Department of Earth and Environmental Engineering, Lenfest Center for Sustainable Energy, Columbia University, New York, NY (United States); Department of Chemical Engineering, Lenfest Center for Sustainable Energy, Columbia University, New York, NY (United States); Petit, Camille, E-mail: ap2622@columbia.edu [Department of Chemical Engineering, Imperial College London, London (United Kingdom)

    2015-10-01

    CO{sub 2} capture by amine scrubbing, which has a high CO{sub 2} capture capacity and a rapid reaction rate, is the most employed and investigated approach to date. There are a number of recent large-scale demonstrations including the Boundary Dam Carbon Capture Project by SaskPower in Canada that have reported successful implementations of aqueous amine solvent in CO{sub 2} capture from flue gases. The findings from these demonstrations will significantly advance the field of CO{sub 2} capture in the coming years. While the latest efforts in aqueous amine solvents are exciting and promising, there are still several drawbacks to amine-based CO{sub 2} capture solvents including high volatility and corrosiveness of the amine solutions as well as the high parasitic energy penalty during the solvent regeneration step. Thus, in a parallel effort, alternative CO{sub 2} capture solvents, which are often anhydrous, have been developed as the third-generation CO{sub 2} capture solvents. These novel classes of liquid materials include ionic liquids, CO{sub 2}-triggered switchable solvents (i.e., CO{sub 2}-binding organic liquids, reversible ionic liquids), and nanoparticle organic hybrid materials. This paper provides a review of these various anhydrous solvents and their potential for CO{sub 2} capture. Particular attention is given to the mechanisms of CO{sub 2} absorption in these solvents, their regeneration and their processability – especially taking into account their viscosity. While not intended to provide a complete coverage of the existing literature, this review aims at pointing the major findings reported for these new classes of CO{sub 2} capture media.

  13. Recent Advances in Anhydrous Solvents for CO2 Capture: Ionic Liquids, Switchable Solvents, and Nanoparticle Organic Hybrid Materials

    Directory of Open Access Journals (Sweden)

    YOUNGJUNE ePARK

    2015-10-01

    Full Text Available CO2 capture by amine scrubbing, which has a high CO2 capture capacity and a rapid reaction rate, is the most employed and investigated approach to date. There are a number of recent large-scale demonstrations including the Boundary Dam Carbon Capture Project by SaskPower in Canada that have reported successful implementations of aqueous amine solvent in CO2 capture from flue gases. The findings from these demonstrations will significantly advance the field of CO2 capture in the coming years. While the latest efforts in aqueous amine solvents are exciting and promising, there are still several drawbacks to amine-based CO2 capture solvents including high volatility and corrosiveness of the amine solutions, as well as the high parasitic energy penalty during the solvent regeneration step. Thus, in a parallel effort, alternative CO2 capture solvents, which are often anhydrous, have been developed as the third-generation CO2 capture solvents. These novel classes of liquid materials include: Ionic Liquids (ILs, CO2-triggered switchable solvents (i.e., CO2 Binding Organic Liquids (CO2BOLs, Reversible Ionic Liquids (RevILs, and Nanoparticle Organic Hybrid Materials (NOHMs. This paper provides a review of these various anhydrous solvents and their potential for CO2 capture. Particular attention is given to the mechanisms of CO2 absorption in these solvents, their regeneration and their processability – especially taking into account their viscosity. While not intended to provide a complete coverage of the existing literature, this review aims at pointing the major findings reported for these new classes of CO2 capture media.

  14. Recent Advances in Anhydrous Solvents for CO2 Capture: Ionic Liquids, Switchable Solvents, and Nanoparticle Organic Hybrid Materials

    International Nuclear Information System (INIS)

    Park, Youngjune; Lin, Kun-Yi Andrew; Park, Ah-Hyung Alissa; Petit, Camille

    2015-01-01

    CO 2 capture by amine scrubbing, which has a high CO 2 capture capacity and a rapid reaction rate, is the most employed and investigated approach to date. There are a number of recent large-scale demonstrations including the Boundary Dam Carbon Capture Project by SaskPower in Canada that have reported successful implementations of aqueous amine solvent in CO 2 capture from flue gases. The findings from these demonstrations will significantly advance the field of CO 2 capture in the coming years. While the latest efforts in aqueous amine solvents are exciting and promising, there are still several drawbacks to amine-based CO 2 capture solvents including high volatility and corrosiveness of the amine solutions as well as the high parasitic energy penalty during the solvent regeneration step. Thus, in a parallel effort, alternative CO 2 capture solvents, which are often anhydrous, have been developed as the third-generation CO 2 capture solvents. These novel classes of liquid materials include ionic liquids, CO 2 -triggered switchable solvents (i.e., CO 2 -binding organic liquids, reversible ionic liquids), and nanoparticle organic hybrid materials. This paper provides a review of these various anhydrous solvents and their potential for CO 2 capture. Particular attention is given to the mechanisms of CO 2 absorption in these solvents, their regeneration and their processability – especially taking into account their viscosity. While not intended to provide a complete coverage of the existing literature, this review aims at pointing the major findings reported for these new classes of CO 2 capture media.

  15. Place in Transition

    DEFF Research Database (Denmark)

    Mikkelsen, Jacob Bjerre; Lange, Ida Sofie Gøtzsche

    from the 'Everyday World'. Within mobilities studies, research has focused on different aspects and consequences of the post-oil society (see Dennis & Urry 2009, Urry 2013). This paper discusses the conception of place within the enclosed 'Oil World' with point of departure in relocation...... and redefinition of oil rigs from an urban design perspective. The paper constitutes a theoretical basis for future design scenarios - exemplified through visionary urban design proposals for a specific site in the city of Esbjerg, Denmark. Relocating rigs to an urban context initiates discussions of conception...... of 'Place' questioning the fixity of 'Place' (Jensen 2010). Scoped through a relational sense of place (Massey 1993) and the potential of exploring new relations between places (Burns & Kahn 2005), the paper challenges the notion of 'Place as God' (Hvattum 2010). These places in transition contest...

  16. Taking climate to the market

    International Nuclear Information System (INIS)

    Boyle, S.

    1998-01-01

    Since the 1997 Kyoto Protocol set binding targets for greenhouse gas reductions, there has been a rapid increase in interest in emissions trading. This is based on the premise that reduction options may be cheaper in countries such as those of eastern Europe and the developing world, than in others such as the USA and Norway. As long as real emission reductions take place, and given that climate change is a global problem, setting up an emissions trading market should provide a much cheaper option than reductions applied solely at a national level. The real prospects for a viable market, what it will look like, and the deals already taking place are examined. (UK)

  17. Processing of polymers using reactive solvents

    NARCIS (Netherlands)

    Lemstra, P.J.; Kurja, J.; Meijer, H.E.H.; Meijer, H.E.H.

    1997-01-01

    A review with many refs. on processing of polymers using reactive solvents including classification of synthetic polymers, guidelines for the selection of reactive solvents, basic aspects of processing, examples of intractable and tractable polymer/reactive solvent system

  18. Industrial rag cleaning process for the environmentally safe removal of petroleum-based solvents

    International Nuclear Information System (INIS)

    Fierro, J.V.

    1993-01-01

    A process for the cleaning of industrial rags contaminated with environmentally unsafe petroleum-based solvent is described, comprising the step of: (a) placing a load of the industrial rags in a mechanically driven rotary drum; (b) revolving the drum at a high speed sufficient to physically extract liquid petroleum-based solvent contaminate from the industrial rags; (c) routing the extracted petroleum-based solvent contaminate from the rotary drum to a waste solvent collection line for environmentally safe disposal; (d) revolving the rotary drum to cause a tumbling of the industrial rags while maintaining the temperature within the drum at below the flash point of the petroleum-based solvent; (e) intermittently forcing cold air and hot air through the rotary drum to vaporize solvent from the industrial rags; (f) routing the vaporized petroleum-based solvent contaminant from the rotary drum to a condenser wherein the petroleum-based solvent contaminate is condensed and thereafter further routing said condensed solvent to a waste collection line for environmentally safe disposal; and (g) cleaning the industrial rags in the presence of a dry cleaning solvent to remove residual petroleum-based solvents and soil

  19. Handbook of organic solvent properties

    CERN Document Server

    Smallwood, Ian

    2012-01-01

    The properties of 72 of the most commonly used solvents are given, tabulated in the most convenient way, making this book a joy for industrial chemists to use as a desk reference. The properties covered are those which answer the basic questions of: Will it do the job? Will it harm the user? Will it pollute the air? Is it easy to handle? Will it pollute the water? Can it be recovered or incinerated? These are all factors that need to be considered at the early stages of choosing a solvent for a new product or process.A collection of the physical properties of most commonly used solvents, their

  20. Acetone-based cellulose solvent.

    Science.gov (United States)

    Kostag, Marc; Liebert, Tim; Heinze, Thomas

    2014-08-01

    Acetone containing tetraalkylammonium chloride is found to be an efficient solvent for cellulose. The addition of an amount of 10 mol% (based on acetone) of well-soluble salt triethyloctylammonium chloride (Et3 OctN Cl) adjusts the solvent's properties (increases the polarity) to promote cellulose dissolution. Cellulose solutions in acetone/Et3 OctN Cl have the lowest viscosity reported for comparable aprotic solutions making it a promising system for shaping processes and homogeneous chemical modification of the biopolymer. Recovery of the polymer and recycling of the solvent components can be easily achieved. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Place-Specific Computing

    DEFF Research Database (Denmark)

    Messeter, Jörn

    2009-01-01

    An increased interest in the notion of place has evolved in interaction design based on the proliferation of wireless infrastructures, developments in digital media, and a ‘spatial turn’ in computing. In this article, place-specific computing is suggested as a genre of interaction design that add......An increased interest in the notion of place has evolved in interaction design based on the proliferation of wireless infrastructures, developments in digital media, and a ‘spatial turn’ in computing. In this article, place-specific computing is suggested as a genre of interaction design...... that addresses the shaping of interactions among people, place-specific resources and global socio-technical networks, mediated by digital technology, and influenced by the structuring conditions of place. The theoretical grounding for place-specific computing is located in the meeting between conceptions...... of place in human geography and recent research in interaction design focusing on embodied interaction. Central themes in this grounding revolve around place and its relation to embodiment and practice, as well as the social, cultural and material aspects conditioning the enactment of place. Selected...

  2. From sense of place to visualization of place: examining people-place relationships for insight on developing geovisualizations.

    Science.gov (United States)

    Newell, Robert; Canessa, Rosaline

    2018-02-01

    Effective resource planning incorporates people-place relationships, allowing these efforts to be inclusive of the different local beliefs, interests, activities and needs. 'Geovisualizations' can serve as potentially powerful tools for facilitating 'place-conscious' resource planning, as they can be developed with high degrees of realism and accuracy, allowing people to recognize and relate to them as 'real places'. However, little research has been done on this potential, and the place-based applications of these visual tools are poorly understood. This study takes steps toward addressing this gap by exploring the relationship between sense of place and 'visualization of place'. Residents of the Capital Regional District of BC, Canada, were surveyed about their relationship with local coastal places, concerns for the coast, and how they mentally visualize these places. Factor analysis identified four sense of place dimensions - nature protection values, community and economic well-being values, place identity and place dependence, and four coastal concerns dimensions - ecological, private opportunities, public space and boating impacts. Visualization data were coded and treated as dependent variables in a series of logistic regressions that used sense of place and coastal concerns dimensions as predictors. Results indicated that different aspects of sense of place and (to a lesser degree) concerns for places influence the types of elements people include in their mental visualization of place. In addition, sense of place influenced the position and perspective people assume in these visualizations. These findings suggest that key visual elements and perspectives speak to different place relationships, which has implications for developing and using geovisualizations in terms of what elements should be included in tools and (if appropriate) depicted as affected by potential management or development scenarios.

  3. Management and communication courses – Places available

    CERN Multimedia

    2012-01-01

    There are places available in some management and communication courses taking place in the period January to March 2013.   For more information on the course, click on the course title, which will bring you to the training catalogue. You can then sign-up on-line. For advice, you can contact: Erwin Mosselmans, tel. 74125, erwin.mosselmans@cern.ch Nathalie Dumeaux, tel. 78144, nathalie.dumeaux@cern.ch Courses in English (or bilingual) Session Duration Language Availability How to get, as a supervisor, the most out of the annual interview 21 January 1 day English 2 places Project Engineering 24 and 25 January 2 days English 6 places How to get, as a supervisor, the most out of the annual interview 31 January 1 day English 6 places Conflict Resolution for Managers 19 and 20 February 2 days English One more place Project Scheduling & Costing 6 and 7 March 2 days English 2 places Communicati...

  4. Take Charge. Take the Test. PSA (:30)

    Centers for Disease Control (CDC) Podcasts

    2012-03-07

    As part of the Take Charge. Take the Test. campaign, this 30 second PSA encourages African American women to get tested for HIV. Locations for a free HIV test can be found by visiting hivtest.org/takecharge or calling 1-800-CDC-INFO (1-800-232-4636).  Created: 3/7/2012 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 3/7/2012.

  5. Uranium refining by solvent extraction

    International Nuclear Information System (INIS)

    Kraikaew, J.

    1996-01-01

    The yellow cake refining was studied in both laboratory and semi-pilot scales. The process units mainly consist of dissolution and filtration, solvent extraction, and precipitation and filtration. Effect of flow ratio (organic flow rate/ aqueous flow rate) on working efficiencies of solvent extraction process was studied. Detailed studies were carried out on extraction, scrubbing and stripping processes. Purity of yellow cake product obtained is high as 90.32% U 3 O 8

  6. The value of place

    Science.gov (United States)

    Dentzau, Michael W.

    2014-03-01

    This commentary seeks to expand the dialogue on place-based science education presented in Katie Lynn Brkich's article, where the connections fifth grade students make between their formal earth science curriculum and their lived experiences are highlighted. The disconnect between the curriculum the students are offered and their immediate environment is clear, and we are presented with examples of how they strive to make connections between the content and what they are familiar with—namely their surroundings. "Place" is identified as a term with complex meanings and interpretations, even in the scope of place-based science education, and understanding how the term is used in any given scenario is essential to understanding the implications of place-based education. Is place used as a location, locale or a sense of place? To understand "place" is to acknowledge that for the individual, it is highly situational, cultural and personal. It is just such attributes that make place-based education appealing, and potentially powerful, pedagogically on one hand, yet complex for implementation on the other. The argument is posed that place is particularly important in the context of education about the environment, which in its simplest manifestation, connects formal science curriculum to resources that are local and tangible to students. The incorporation of place in such a framework seeks to bridge the gap between formal school science subjects and students' lived experiences, yet acknowledges the tensions that can arise between accommodating place meanings and the desire to acculturate students into the language of the scientific community. The disconnect between guiding policy frameworks and the reality of the Next Generation Science Standards is addressed opening an avenue for further discussion of the importance of socio-cultural frameworks of science learning in an ever increasing era of accountability.

  7. Technical training: places available

    CERN Multimedia

    HR Department

    2007-01-01

    CERN Technical Training: Open Courses (April - June 2007) The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007:   AutoCAD 2006 - niveau 1 (course in French): 25.4.- 26.4.2007 & 2.5. - 3.5.2007 (4 days in 2 modules, 5 places available) AutoCAD 2006 - niveau 1 (course in French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, 5 places available) AutoCAD Mechanical 2006 (course in French) 21.6.-22.6.2007 (2 days, 8 places available) * NEW COURSE* Automate de securite S7 (course in French) 14.5.-16.5.2007 (3 days, 4 places available) * NEW COURSE* Automate de securite S7 (course in French): 9.5.-11.5.2007 (3 days, 4 places available) JCOP - Joint PVSS-JCOP Frameswork (course in English): 21.5.-25.5.2007 (5 days, 12 places available) JCOP - Finite State Machines in the JCOP Frameswork (course in English): 12.6.-14.6.2007 (3 days, 12 places available) LabVIEW Basics 1 (in English): 2.-4.5.2007 (3 days, 7 places ...

  8. A Sense of Place

    Directory of Open Access Journals (Sweden)

    Rachel Black

    2012-09-01

    Full Text Available People increasingly want to know where their food and wine comes from and who produces it. This is part of developing a taste of place, or what the French call terroir. The academic and industry debates surrounding the concept of terroir are explored, and the efforts of Massachusetts wine producers to define their sense of place are discussed.

  9. Place in transition

    DEFF Research Database (Denmark)

    Mikkelsen, Jacob Bjerre; Lange, Ida Sofie Gøtzsche

    2017-01-01

    World. This paper discusses the conception of place in the Oil World, with the relocation and transformation of oil rigs from an urban design perspective as its point of departure, using Esbjerg, Denmark, as a case study. Combining a theoretical understanding of places as relational with a design...

  10. The Case for Place

    Science.gov (United States)

    Thomas, Lisa Carlucci

    2012-01-01

    Bookstores, record stores, libraries, Facebook: these places--both physical and virtual--demonstrate an established and essential purpose as centers of community, expertise, convenience, immediacy, and respect. Yet as digital, mobile, and social shifts continue to transform culture and interactions, these spaces and places transform, too.…

  11. Non-Place

    DEFF Research Database (Denmark)

    formulation. The anthology contains 17 articles engaged directly in the application, retrofitting and broadening of the concept of the non-place to a range of literary and media texts, as well as the merging of this concept to other theoretical concepts by e.g. Michel Foucault, Gilles Deleuze, Alain Badiou......We spend more and more of our everyday lives in what Marc Augé calls non-places – homogenous, but bland places of transit. This anthology addresses the representations of non-places in literature, culture and media, and critiques and re-actualizes Augé’s work twenty years after its initial...... Jutland, and many others. This anthology is the seventh publication in the IRGiC series and it springs from a research seminar held at Aalborg University in May 2013: “Non-Place in Literature, Media and Culture”....

  12. Place-Specific Computing

    DEFF Research Database (Denmark)

    Messeter, Jörn; Johansson, Michael

    project place- specific computing is explored through design oriented research. This article reports six pilot studies where design students have designed concepts for place-specific computing in Berlin (Germany), Cape Town (South Africa), Rome (Italy) and Malmö (Sweden). Background and arguments...... for place-specific computing as a genre of interaction design are described. A total number of 36 design concepts designed for 16 designated zones in the four cities are presented. An analysis of the design concepts is presented indicating potentials, possibilities and problems as directions for future......An increased interest in the notion of place has evolved in interaction design. Proliferation of wireless infrastructure, developments in digital media, and a ‘spatial turn’ in computing provides the base for place-specific computing as a suggested new genre of interaction design. In the REcult...

  13. Technical training - places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department »Electronics design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 3 places available Foundations of Electromagnetism and Magnet Design (EMAG) 14-Nov-12 to 27-Nov-12 6 days English 20 places available Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 15 places available Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 7 places available LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places available »Mechanical design Next Se...

  14. Where is 'place' in Aging in place?

    DEFF Research Database (Denmark)

    Blaakilde, Anne Leonora

    2015-01-01

    is influenced by universalism, aiming at equality in terms of access to health services and care. However, these welfare provisions seem to be deeply embedded in methodological nationalism, since only citizens with residence within the borders of Denmark have the right to live in public nursing homes or receive......The aim of this article is to contribute a transnational perspective to the field of environmental gerontology and the concept of aging in place. Seniors from the northern hemisphere, among them Danish citizens, are increasingly adapting to transnational lives as they move to warmer climates...... in-home help. It is argued that we should consider public solutions to the problems faced by frail Danish citizens in transnational settings, enhancing their opportunities to live abroad....

  15. Investigations of the reactivity of pyridine carboxylic acids with diazodiphenylmethane in protic and aprotic solvents.

    Directory of Open Access Journals (Sweden)

    ALEKSANDAR D. MARINKOVIC

    2005-04-01

    Full Text Available Rate constants for the reaction of diazodiphenylmethane with isomeric pyridine carboxylic acids were determined in chosen protic and aprotic solvents at 30 °C, using the well known UV spectrophotometric method. The values of the rate constants of the investigated acids in protic solvents were higher than those in aprotic solvents. The second order rate constants were correlated with solvent parameters using the Kamlet-Taft solvatochromic equation in the form: log k = log k0 + sp* + aa + bb . The correlation of the obtained kinetic data were performed by means of multiple linear regression analysis taking appropriate solvent parameters. The signs of the equation coefficients were in agreement with the postulated reaction mechanism. The mode of the influence of the solvent on the reaction rate in all the investigated acids are discussed on the basis of the correlation results.

  16. Influences of surface and solvent on retention of HEMA/mixture components after evaporation.

    Science.gov (United States)

    Garcia, Fernanda C P; Wang, Linda; Pereira, Lúcia C G; de Andrade e Silva, Safira M; Júnior, Luiz M; Carrilho, Marcela Rocha de Oliveira

    2010-01-01

    This study examined the retention of solvents within experimental HEMA/solvent primers after two conditions for solvent evaporation: from a free surface or from dentine surface. Experimental primers were prepared by mixing 35% HEMA with 65% water, methanol, ethanol or acetone (v/v). Aliquots of each primer (50 microl) were placed on glass wells or they were applied to the surface of acid-etched dentine cubes (2mm x 2mm x 2mm) (n=5). For both conditions (i.e. from free surface or dentine cubes), change in primers mass due to solvent evaporation was gravimetrically measured for 10min at 51% RH and 21 degrees C. The rate of solvent evaporation was calculated as a function of loss of primers mass (%) over time. Data were analysed by two-way ANOVA and Student-Newman-Keuls (pevaporation rate (%/min) depending on the solvent present in the primer and the condition for evaporation (from free surface or dentine cubes) (pevaporation for HEMA/acetone primer was almost 2- to 10-times higher than for HEMA/water primer depending whether evaporation occurred, respectively, from a free surface or dentine cubes. The rate of solvent evaporation varied with time, being in general highest at the earliest periods. The rate of solvent evaporation and its retention into HEMA/solvent primers was influenced by the type of the solvent and condition allowed for their evaporation.

  17. Taking iron supplements

    Science.gov (United States)

    ... medlineplus.gov/ency/article/007478.htm Taking iron supplements To use the sharing features on this page, ... levels. You may also need to take iron supplements as well to rebuild iron stores in your ...

  18. Alternatives to Organic Solvents in Industrial Cleaning Processes

    DEFF Research Database (Denmark)

    Jacobsen, Thomas

    1998-01-01

    To control chemical hazards in work places, substitution of harmful substances with less harmful or non-toxic products is now a method used in many countries and in many companies. It has previously been demonstrated that it is desirable and possible to use non-volatile, low-toxic vegetable...... cleaning agents in offset printing companies instead of volatile, toxic organic solvents. The present study is based on a project with the aim of defining other industrial processes, where organic solvents used for cleaning or degreasing can be replaced by non-volatile, low-toxic products, which are based...... on esters from fatty acids of vegetable origin (vegetable esters - VE).The study indicates that industrial cleaning/degreasing with organic solvents may be substituted with VEs on metal surfaces and on some coated surfaces, in manufacture of paints and inks, use of paints, use of inks (printing), metal...

  19. Context in place

    DEFF Research Database (Denmark)

    Nordentoft, Helle Merete; Thomsen, Rie

    specifically argue for a more grounded approach to the conception of context - a topographic approach - in which the physical setting - i.e. 'the place' becomes an inevitable part of analyses of guidance practices in order to understand participants' sense-making processes. In the paper we draw on two case...... studies on interdisciplinary clinical supervision and work place guidance in which there appears to be a mismatch between intended outcomes and actual events. The analyses demonstrate and support that 'the place' seems - to influence partipants' responses in the guidance sessions and, therefore, must...

  20. Management and communication courses – Places available

    CERN Multimedia

    2013-01-01

    There are places available in some management and communication courses taking place in the period April to June 2013.   For more information on the course, click on the course title, this will bring you to the training catalogue. You can then sign-up online. For advice, you can contact: - Erwin Mosselmans, tel. 74125, erwin.mosselmans@cern.ch - Nathalie Dumeaux, tel. 78144, nathalie.dumeaux@cern.ch Courses in English (or bilingual) Sessions Duration Language Availability Managing stress 29 and 30 May 2 days English 3 places Making Presentations 30, 31 May & 25 June 3 days English 2 places Communicating Effectively - Residential course 4 to 6 June 3 days Bilingual 9 places Handling difficult conversations (Adapted from Dealing with Conflict) 7 and 14 June and 13 September 3 days English 6 places Voice and Nonverbal Behaviour in Speech Communication 17 and 18 June 1 day 4 hours English 7 plac...

  1. Solvents interactions with thermochromic print

    Directory of Open Access Journals (Sweden)

    Mirela Rožić

    2017-12-01

    Full Text Available In this study, the interactions between different solvents (benzene, acetone, cyclohexanone, various alcohols and water and thermochromic printing ink were investigated. Thermochromic printing ink was printed on metal surface. Components of thermochromic printing inks are polymeric microcapsules and classic yellow offset printing ink. Below its activation temperature, dye and developer within the microcapsules form a blue coloured complex. Therefore, thermochromic print is green. By heating above the activation temperature, blue colour of the complex turns into the leuco dye colourless state and the green colour of the prints turns into the yellow colour of the classic offset pigment. The results of the interaction with various solvents show that the thermochromic print is stable in all tested solvents except in ethanol, acetone and cyclohexanone. In ethanol, the green colour of the print becomes yellow. SEM analysis shows that microcapsules are dissolved. In acetone and cyclohexanone, the green colour of the print turns into blue, and the microcapsules become significantly more visible. Thus, the yellow pigment interacts with examined ketones. Based on the obtained interactions it can be concluded that the microcapsules have more polar nature than the classical pigment particles. Solvent-thermocromic print interactions were analysed using Hansen solubility parameters that rank the solvents based on their estimated interaction capabilities.

  2. Technical training - Places available

    CERN Document Server

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Availability Certified LabVIEW Associate Developer (CLAD) 06-Dec-12 to 06-Dec-12 1 hour English One more place available Compatibilité électromagnetique (CEM): Applications 23-Nov-12 to 23-Nov-12 3.5 hours English 3 places available Compatibilité électromagnétique (CEM): Introduction 23-Nov-12 to 23-Nov-12 3 hours English 43 places available Effets des Radiations sur les composants et systèmes électroniques 11-Dec-12 to 12-Dec-12 1 day 4 hours French 9 places available LabVIEW for beginners ...

  3. History, Criticism and Place

    DEFF Research Database (Denmark)

    Hinds, Mat; Carter, Adrian; Malpas, Jeff

    2012-01-01

    Rory Spence and Richard Leplastrier shared a conversation and friendship that lasted 20years until Spence's death in 2004. The discussions focused largely upon issues of place, distilled through the practice of Leplastrier....

  4. Marine Place Names

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the geographic place names for features in the U.S territorial waters and outer continental shelf. These names can be used to find or define a...

  5. Self-Placing Concrete

    OpenAIRE

    ECT Team, Purdue

    2007-01-01

    Certain concrete pours have areas where the congestion of reinforcing bars make placement of concrete almost impossible. Using conventional placing and vibration techniques, the resulting concrete can have considerable honeycombing due to the development of voids. Self-placing concrete is a possible solution to the problem. Also known as self-compactable concrete, self-consolidating concrete, flowable concrete, and non-vibration concrete. These concretes eliminate the need for vibration in a ...

  6. 'A Place to Sit'

    DEFF Research Database (Denmark)

    Hvejsel, Marie Frier; Klok, Julie Skovgaard; Bøhnke, Mia Marker

    Published in 2014 on the occasion of the third 'A Place to Sit' exhibition as a reflection upon three years of teaching tectonic method in architecture using the furniture scale as a learning basis.......Published in 2014 on the occasion of the third 'A Place to Sit' exhibition as a reflection upon three years of teaching tectonic method in architecture using the furniture scale as a learning basis....

  7. Technical training - Places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department Electronic Design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 4 places Electrostatique / Protection ESD 28-Sep-12 to 28-Sep-12 3 hours French 25 places Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 14 places Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 9 places LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places LabVIEW for Experts 24-Sep-12 to 28-Sep-12 5 days English 6 places LabVIEW for beginners 15-Oct-12 to 17-...

  8. Multiple sclerosis and organic solvents

    DEFF Research Database (Denmark)

    Mortensen, J T; Brønnum-Hansen, Henrik; Rasmussen, K

    1998-01-01

    We investigated a possible causal relation between exposure to organic solvents in Danish workers (housepainters, typographers/printers, carpenters/cabinetmakers) and onset of multiple sclerosis. Data on men included in the Danish Multiple Sclerosis Register (3,241 men) were linked with data from......, and butchers. Over a follow-up period of 20 years, we observed no increase in the incidence of multiple sclerosis among men presumed to be exposed to organic solvents. It was not possible to obtain data on potential confounders, and the study design has some potential for selection bias. Nevertheless......, the study does not support existing hypotheses regarding an association between occupational exposure to organic solvents and multiple sclerosis....

  9. Indium recovery by solvent extraction

    International Nuclear Information System (INIS)

    Fortes, Marilia Camargos Botelho

    1999-04-01

    Indium has been recovered as a byproduct from residues generated from the sulfuric acid leaching circuits in mineral plants for zinc recovery. Once its recovery comes from the slags of other metals recovery, it is necessary to separate it from the other elements which usually are present in high concentrations. Many works have been approaching this separation and indicate the solvent extraction process as the main technique used. In Brazilian case, indium recovery depends on the knowledge of this technique and its development. This paper describes the solvent extraction knowledge for the indium recovery from aqueous solutions generated in mineral plants. The results for determination of the best experimental conditions to obtain a high indium concentration solution and minimum iron poisoning by solvent extraction with di (2-ethylhexyl)-phosphoric acid (D2EHPA) solubilized in isoparafin and exxsol has been presented. (author)

  10. Solvent sorting in (mixed solvent electrolyte) systems: Time-resolved ...

    Indian Academy of Sciences (India)

    lar solvents as an effective single component dipo- lar liquid that is characterized ... and time (t) dependent solvation energy of mobile dipo- lar solute with density ..... Even though this way for modification of C is purely ad- hoc, the observation ...

  11. Solvent-free functionalization of fullerene C{sub 60} and pristine multi-walled carbon nanotubes with aromatic amines

    Energy Technology Data Exchange (ETDEWEB)

    Ramírez-Calera, Itzel J. [Centro de Ciencias Aplicadas y Desarrollo Tecnológico, Universidad Nacional Autónoma de México, Circuito Exterior C. U., 04510, México, D.F. (Mexico); Meza-Laguna, Victor [Instituto de Ciencias Nucleares, Universidad Nacional Autónoma de México, Circuito Exterior C. U., 04510 México, D.F. (Mexico); Gromovoy, Taras Yu. [O.O. Chuiko Institute of Surface Chemistry, National Academy of Sciences of the Ukraine, Gen. Naumova 17, 03164 Kiev (Ukraine); Chávez-Uribe, Ma. Isabel [Instituto de Química, Universidad Nacional Autónoma de México, Circuito Exterior C. U., 04510 México, D.F. (Mexico); Basiuk, Vladimir A., E-mail: basiuk@nucleares.unam.mx [Instituto de Ciencias Nucleares, Universidad Nacional Autónoma de México, Circuito Exterior C. U., 04510 México, D.F. (Mexico); Basiuk, Elena V., E-mail: elbg1111@gmail.com [Centro de Ciencias Aplicadas y Desarrollo Tecnológico, Universidad Nacional Autónoma de México, Circuito Exterior C. U., 04510, México, D.F. (Mexico)

    2015-02-15

    Highlights: • Pristine multi-walled carbon nanotubes were functionalized with aromatic amines. • The amines add onto nanotube defects, likewise they add onto fullerene C{sub 60}. • The addition takes place at elevated temperature and without organic solvents. • Functionalized nanotubes were characterized by a number of instrumental techniques. - Abstract: We employed a direct one-step solvent-free covalent functionalization of solid fullerene C{sub 60} and pristine multi-walled carbon nanotubes (MWCNTs) with aromatic amines 1-aminopyrene (AP), 2-aminofluorene (AF) and 1,5-diaminonaphthalene (DAN). The reactions were carried out under moderate vacuum, in a wide temperature range of 180–250 °C, during relatively short time of about 2 h. To confirm successful amine attachment, a large number of analytical techniques were used (depending on the nanomaterial functionalized) such as Fourier transform infrared, Raman, X-ray photoelectron, {sup 13}C cross-polarization magic angle spinning NMR spectroscopy, thermogravimetric analysis, laser-desorption ionization time-of-flight mass spectrometry, temperature-programmed desorption with mass spectrometric detection, as well as scanning and transmission electron microscopy. The nucleophilic addition of the aromatic amines to C{sub 60} molecule was studied theoretically by using density functional theory (PBE GGA functional with Grimme dispersion correction in conjunction with the DNP basis set). In the case of crystalline C{sub 60}, the solvent-free technique has a limited applicability due to poor diffusion of vaporous aromatic amines into the bulk. Nevertheless, the approach proposed allows for a facile preparation of aromatic amine-functionalized pristine MWCNTs without contamination with other chemical reagents, detergents and solvents, which is especially important for a vast variety of nanotube applications spanning from nanoelectronics to nanomedicine.

  12. (Re)tasting places

    DEFF Research Database (Denmark)

    Hedegaard, Liselotte

    2015-01-01

    What does geographical origin mean? It is an expression that associates food and wine with a specific place, an association embedded in the concept ‘terroir’ that refers to the complex interaction between a physical environment and local craftsmanship. It is a claim protected through labelling......-schemes and a claim that adds value to the place-related foods. However, viewing the connection between food and place as a question of proving a relationship or as a matter of protecting commercial claims does not seem to provide a satisfactory account for the status of geographically designated foods as being...... particularly attractive Central to the interest of this paper is to approach an understanding of geographical origin as a point of reference for taste. In terms of being sensory experience, taste is subjective. It is difficult to describe verbally and yet at the same time it is a trigger of the memory of past...

  13. Stress at Work Place

    OpenAIRE

    Mohammad A. Shahrour

    2010-01-01

    One of hardest forms of stresses to avoid is that work place or job stress Job stress refers to stress experienced by an individual at or because of issues at their work place The term work related stress has many meanings and it causes different levels of anxiety. Not all challenges at work can be called stress as some of these challenges drive employees upward, and empower them to learn new skills or push them to work harder to achieve a certain goal. So, this type of challenges cannot be c...

  14. Ageing in communal place

    DEFF Research Database (Denmark)

    Aarhus, Rikke; Ballegaard, Stinne Aaløkke; Grönvall, Erik

    2009-01-01

    In this paper we adopt the position that design of social media for the elderly and virtual senior communities may be informed by studying `real´senior communities. Since current research efforts target the role of social media and virtual communities for supporting seniors ageing in place, i.......e. in their homes, housing communities seems a natural place to begin this enquiry. We conducted observations and informal interviews in six different senior dwellings. In this paper we present the key findings from these visits related to social interaction and the formation of communities and explicate how...

  15. Improved Purex solvent scrubbing methods

    International Nuclear Information System (INIS)

    Mailen, J.C.; Tallent, O.K.

    1984-01-01

    Studies of hydrazine and hydroxylamine salts as solvent scrubbing agents that can be decomposed into gases are summarized. Results from testing of countercurrent scrubbers and solid sorber columns that produce lesser amounts of permanent salts are reported. The status of studies of the acid-degradation of paraffin diluent and the options for removal of long-chain organic acids is given

  16. Risk assessment for halogenated solvents

    International Nuclear Information System (INIS)

    Travis, C.C.

    1988-01-01

    A recent development in the cancer risk area is the advent of biologically based pharmacokinetic and pharmacodynamic models. These models allow for the incorporation of biological and mechanistic data into the risk assessment process. These advances will not only improve the risk assessment process for halogenated solvents but will stimulate and guide basic research in the biological area

  17. Technical training - Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 16.5.2006 (May-November course sessions) Technical Training: Places available The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language ACROBAT 7.0 : Utilisation de fichiers PDF 8 8.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls 32 30.05-2.06.06 E ACROBAT 7.0 : Utilisation de fichiers PDF 24 7-9.06.06 E AutoCAD Mechanical 2006 16 13-14.06.06 F CERN EDMS for Local Administrators 16 13-14.06.06 E LabVIEW Base 2 32 27.06-5.07.06 F C++ Programming Part 3 - Templates and the STL (Standard Template Library) 16 27-28.06.06 E C++ Programming Part 4 - Exceptions 8 29.06.06 E FrontPage 2003 - niveau 1 16 29-...

  18. The Value of Place

    Science.gov (United States)

    Dentzau, Michael W.

    2014-01-01

    This commentary seeks to expand the dialogue on place-based science education presented in Katie Lynn Brkich's article, where the connections fifth grade students make between their formal earth science curriculum and their lived experiences are highlighted. The disconnect between the curriculum the students are offered and their immediate…

  19. The power of place.

    Science.gov (United States)

    Lock, Lin R; Gibb, Heather J

    2003-06-01

    to describe the power that 'place' holds over the postnatal-care experiences of women. a study informed by phenomenology within a feminist framework was undertaken to examine the experiences of women electing early postnatal discharge. Three extended conversations with each woman participating in the study were audiotaped and transcribed. Journal notes made by the researcher added to the audiotaped data. Thematic analysis revealed major structures of experience. data were obtained from conversations with women in their respective homes. five women, parity 1-3, living in the Sydney metropolitan area and birthing in their local hospitals participated in the study. four major constructs of experience were revealed through analysis and include spatiality, corporeality, temporality and relationality. In this paper, components of spatiality expressed through the power place exerts in matters of physical environment,control, confidence, safety, time, talk and the heart of the matter are presented. the experiences of women entering the foreign place of hospital to birth their children were those of alienation and disempowerment while the familiar territory of home offered stronger feelings of security and support. failing to recognise the impact of place on the experiences of postnatal women reduces the likelihood that midwives will be able to offer sensitive and appropriate care.

  20. Ageing in Communal Place

    DEFF Research Database (Denmark)

    Aarhus, Rikke; Ballegaard, Stinne Aaløkke; Grönvall, Erik

    2009-01-01

    In this paper we adopt the position that design of social media for the elderly and virtual senior communities may be informed by studying ‘real’ senior communities. Since current research efforts target the role of social media and virtual communities for supporting seniors ageing in place, i...

  1. Technical training - Places available

    CERN Multimedia

    2003-01-01

    * Etant donné le délai d'impression du Bulletin, ces places peuvent ne plus être disponibles au moment de sa parution. Veuillez consulter notre site Web pour avoir la dernière mise à jour. ** The number of places available may vary. Please check our Web site to find out the current availability. Des places sont disponibles dans les cours suivants : Places are available in the following courses: Hands-on Introduction to Python Programming 12 – 14.11.03 (3 days) ACCESS 2000 – niveau 1 13 & 14.11.03 (2 jours) C++ for Particle Physicists 17 – 21.11.03 (6 x 3-hour lectures) Programmation automate Schneider TSX Premium – niveau 2  18 – 21.11.03 (4 jours) Planification de projet avec MS-Project/Project Planning with MS-Project (gratuit/free of charge – langue à définir/language to be defined) : 18 & 25.11.03 (2 jours/2 days) JAVA 2 Enterprise Edition – Part 1 : WEB...

  2. How to take statins

    Science.gov (United States)

    ... allergies. You are taking other medicines. You have diabetes. You have liver disease. You should not take statins if you ... with your provider about the possible risks for: Liver damage Severe ... High blood sugar, or type 2 diabetes Memory loss Confusion

  3. Note Taking and Recall

    Science.gov (United States)

    Fisher, Judith L.; Harris, Mary B.

    1974-01-01

    To study the effect of note taking and opportunity for review on subsequent recall, 88 college students were randomly assigned to five treatment groups utilizing different note taking and review combinations. No treatment effects were found, although quality of notes was positively correlated with free recall an multiple-choice measures.…

  4. Settings: In a Variety of Place. . .

    Science.gov (United States)

    Cairo, Peter; And Others

    This document consists of the fourth section of a book of readings on issues related to adult career development. The four chapters in this fourth section focus on settings in which adult career development counseling may take place. "Career Planning and Development in Organizations" (Peter Cairo) discusses several concepts and definitions…

  5. Iodine removing method in organic solvent

    International Nuclear Information System (INIS)

    Suzuki, Takeo; Sakurai, Manabu

    1988-01-01

    Purpose: To effectively remove iodine in an organic solvent to thereby remove iodine in the solvent that can be re-used or put to purning treatment. Method: Organic solvent formed from wastes of nuclear facilities is mixed with basic lead acetate, or silica gel or activated carbon incorporated with such a compound to adsorb iodine in the organic solvent to the basic lead acetate. Then, iodine in the organic solvent is removed by separating to eliminate the basic lead acetate adsorbing iodine from the organic solvent or by passing the organic solvent through a tower or column charged or pre-coated with silica gel or activated carbon incorporated with lead acetate. By using basic lead acetate as the adsorbents, iodine can effective by adsorbed and eliminated. Thus, the possibility of circumstantial release of iodine can be reduced upon reusing or burning treatment of the organic solvent. (Kamimura, M.)

  6. Computer Aided Solvent Selection and Design Framework

    DEFF Research Database (Denmark)

    Mitrofanov, Igor; Conte, Elisa; Abildskov, Jens

    and computer-aided tools and methods for property prediction and computer-aided molecular design (CAMD) principles. This framework is applicable for solvent selection and design in product design as well as process design. The first module of the framework is dedicated to the solvent selection and design...... in terms of: physical and chemical properties (solvent-pure properties); Environment, Health and Safety (EHS) characteristic (solvent-EHS properties); operational properties (solvent–solute properties). 3. Performing the search. The search step consists of two stages. The first is a generation and property...... identification of solvent candidates using special software ProCAMD and ProPred, which are the implementations of computer-aided molecular techniques. The second consists of assigning the RS-indices following the reaction–solvent and then consulting the known solvent database and identifying the set of solvents...

  7. Canyon solvent cleaning with solid adsorbents

    International Nuclear Information System (INIS)

    Reif, D.J.

    1987-01-01

    The HM Process at the Savannah River Plant (SRP) uses 7.5% tributyl phosphate in n-paraffin as an extraction solvent. During use, the solvent is altered due to hydrolysis and radiolysis, forming materials that influence product losses, product decontamination, and separation efficiencies. Laboratory studies to improve online solvent cleaning have shown that carbonate washing, although removing residual solvent activity, does not remove binding ligands that hold fission products in the solvent. Treatment of solvent with a solid adsorbent removes binding ligands and significantly improves recycle solvent performance. Both laboratory work defining a full-scale adsorption process and the use of the process to clean HM Process first cycle solvent are presented

  8. Experiencing the enchantment of place and mobility

    DEFF Research Database (Denmark)

    Bærenholdt, Jørgen Ole

    2016-01-01

    in several layers of reality. To better understand experiences taking place in intersections between realities, J.R.R. Tolkien’s concept of how real enchantment produces a Secondary World suggests that we see fantasy as real, and this proposition is compared to Georg Simmel’s more modernist suggestion......Experiences of place and mobility play central roles not only in what was traditionally understood as tourism, but also in the broader practices of travelling and visiting sites and sights. On the one hand, such experiences are performed to an extent where it is difficult to isolate the sites...... and movements experienced per se, since visitors and travellers take part in ‘doing’ places and mobility. On the other, experience sites and routes stand out with specific traces and characteristics affording some – and not other – experiences. This paper discusses conceptual understandings that may help...

  9. Parks, People and Places

    DEFF Research Database (Denmark)

    Molin, Julie Frøik

    This thesis suggests, by applying a ‘place’ perspective, that involving users in operational management of green spaces holds potentials for enhancing ‘place attachment’ of urban inhabitants. As this can also build their commitment to decision making on their local living environment, green space...... maintenance becomes a potentially important setting for governance processes. Through a number of qualitative case studies, based on semi-structured interviews with municipal and community actors in Denmark and England, this dissertation explores the status and potentials of applying a place-based governance...... approach to green space maintenance. To guide the exploration a theoretical framework was developed inductively, structured around concepts of environmental governance in combination with strategic approaches to green space management. The framework is operationalised by analyses of the governance...

  10. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The Joint PVSS JCOP Framework: 14 - 18.6.2004 (5 days) EXCEL 2003 - niveau 2 : 17 & 18.6.2004 (2 jours) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 au 8.7.2004 (3 jours) Technical Training Monique Duval - Tel.74924 technical.training@cern.ch

  11. Recent solvent extraction experience at Savannah River

    International Nuclear Information System (INIS)

    Gray, L.W.; Burney, G.A.; Gray, J.H.; Hodges, M.E.; Holt, D.L.; Macafee, I.M.; Reif, D.J.; Shook, H.E.

    1986-01-01

    Tributyl phosphate-based solvent extraction processes have been used at Savannah River for more than 30 years to separate and purify thorium, uranium, neptunium, plutonium, americium, and curium isotopes. This report summarizes the advancement of solvent extraction technology at Savannah River during the 1980's. Topics that are discussed include equipment improvements, solvent treatment, waste reduction, and an improved understanding of the various chemistries in the process streams entering, within, and leaving the solvent extraction processes

  12. Solvent extraction studies of RERTR silicide fuels

    International Nuclear Information System (INIS)

    Gouge, Anthony P.

    1983-01-01

    Uranium silicide fuels, which are candidate RERTR fuel compositions, may require special considerations in solvent extraction reprocessing. Since Savannah River Plant may be reprocessing RERTR fuels as early as 1985, studies have been conducted at Savannah River Laboratory to demonstrate the solvent extraction behavior of this fuel. Results of solvent extraction studies with both unirradiated and irradiated fuel are presented along with the preliminary RERTR solvent extraction reprocessing flow sheet for Savannah River Plant. (author)

  13. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 30.5.2006 (June-November course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue ACROBAT 7.0 : Utilisation de fichiers PDF 8 6.06.06 F Introduction à InDesign 16 7-8.06.06 F Python: Hands-on Introduction 24 7-9.06.06 E LabVIEW Base 2 16 22-23.06.06 F FileMaker - niveau 1 16 26-27.06.06 F C++ Programming Part 3 - Templates and the STL (Standard Template Library) 16 27-28.06.06 E C++ Programming Part 4 - Exceptions 8 29.06.06 E FrontPage 2003 - niveau 1 16 29-30.06.06 F Manipulation des images 4 6.07.06 F Introduction to Databases and Database Design 16 11-12.07.06 E ACCESS 2003 - Level 1: ECDL 16 13-14.07.06 E-F Design Patterns 16 25-26.07.06 E Introduction à Dreamweaver MX 16 ...

  14. Technical training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 13.6.2006 (June-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue LabVIEW Base 2 16 22-23.06.06 F FileMaker - niveau 1 16 26-27.06.06 F C++ Programming Part 3 - Templates and the STL (Standard Template Library) 16 27-28.06.06 E C++ Programming Part 4 - Exceptions 8 29.06.06 E FrontPage 2003 - niveau 1 16 29-30.06.06 F Manipulation des images 4 6.07.06 F Introduction to Databases and Database Design 16 11-12.07.06 E ACCESS 2003 - Level 1: ECDL 16 13-14.07.06 E-F Design Patterns 16 25-26.07.06 E Introduction à Dreamweaver MX 16 26-27.07.06 F ANSYS DesignModeler 16 29-30.08.06 F LabVIEW Basics 1 24 4-6.09.06 E ANSYS Workbench 32 12-15.09.06 F AutoCAD Mechanical 20...

  15. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 9.5.2006 (May-October course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: find out the curren Hours Date Language LabVIEW Application Development 24 15-17.05.06 E LabVIEW Advanced Programming 16 18-19.05.06 E PERL 5: Advanced Aspects 8 18.05.06 E Technique du vide 16 18-19.05.06 F FileMaker - niveau 2 16 11-12.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 F Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE 16 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls 32 30.05-2.06.06 E Python: Hands-on Introduction 24 7-9.06.06 E AutoCAD Mechanical 2006 16 13-14.06.06 F CERN EDMS for Local Administrators 16 13-14.06.06...

  16. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 27.6.2006 (July-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue Manipulation des images 4 6.07.06 F Introduction to Databases and Database Design 16 11-12.07.06 E ACCESS 2003 - Level 1: ECDL 16 13-14.07.06 E-F Design Patterns 16 25-26.07.06 E CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F CERN EDMS - Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F LabVIEW Basics 1 24 4-6.09.06 E ANSYS Workbench 32 12-15.09.06 F AutoCAD Mechanical 2006 16 12-13.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E AutoCAD 2006 - niveau 1 32 14-21.09.06 F LabVIEW Basics 2 ...

  17. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 11.7.2006 (July-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue Design Patterns 16 25-26.07.06 E CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F CERN EDMS – Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F LabVIEW Basics 1 24 4-6.09.06 E ANSYS Workbench 32 12-15.09.06 F AutoCAD Mechanical 2006 16 12-13.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E LabVIEW: Working efficiently with LabWIEW 8 8 18.09.06 E PCAD Schémas ? Introduction 16 21-22.09.06 F PCAD PCB - Introduction  24 27-29.09.06 F C++ for Particle Physicists ...

  18. Technical Training: Places available

    CERN Multimedia

    2006-01-01

    Places available as of 21.3.2006 (March-October course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: find out the curren Hours Date Language ACROBAT 7.0 : Utilisation de fichiers PDF 8 8.05.06 F Project Planning with MS-Project 16 9.05-6.06.06 E STEP7: niveau 1 32 9-12.05.06 E-F Oracle: Programming with PL/SQL 24 10-12.05.06 E FileMaker - niveau 2 16 11-12.05.06 F LabVIEW Application Development 24 15-17.05.06 E LabVIEW Advanced Programming 16 18-19.05.06 E PERL 5: Advanced Aspects 8 18.05.06 E Technique du vide 16 18-19.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 F Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE 16 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its T...

  19. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 19.7.2006 (August-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F OUTLOOK 2003 (Short Course I) - E-mail 3 1.09.06 E/F OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 1.09.06 E/F CERN EDMS - Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F LabVIEW Basics 1 24 11-13.09.06 E ANSYS Workbench 32 12-15.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E EXCEL 2003 (Short Course I) - HowTo... Work with formulae 3 15.09.06 E/F WORD 2003 (Short Course III) - HowTo... Work with long docu...

  20. Technical Training: Places available

    CERN Multimedia

    DAvide Vitè

    2006-01-01

    Places available as of 25.7.2006 (August-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F EXCEL 2003 - niveau 1 : ECDL 16 30-31.08.06 F OUTLOOK 2003 (Short Course I) - E-mail 3 1.09.06 E/F OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 1.09.06 E/F CERN EDMS - Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F ANSYS Workbench 32 12-15.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E WORD 2003 (Short Course III) - HowTo... Work with long documents 3 15.09.06 E/F EXCEL 2003 (Short Course I) - HowTo... Wor...

  1. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 7.2.2006 (February-May course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language WORD 2003 (Short Course II) - HowTo... Mail merge 3 09-02-06 E-F ACCESS 2003 - Level 1: ECDL M5 16 13 to 14-02-06 E-F OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 16-02-06 E-F WORD 2003 (Short Course III) - HowTo... Work with long documents 3 16-02-06 E-F CERN EDMS - Introduction 8 21.02.06 E OUTLOOK 2003 (Short Course III) - Meetings and Delegation 3 27-02-06 E-F WORD 2003 (Short Course IV) - HowTo... Work with master document 3 27-02-06 E-F JAVA: Level 2 32 28-02-06 to 03-03-06 E Manipulation des images 4 28.02.06 F ACCESS 2003 - Level 2: ECDL AM5 16 02 to 03-03-06 E-F FrontPage 2003 - niveau 2 16 02 to 03-03-06 F C++ for Particle Physicists 20 06 to 10-03-06 E FileMaker - niv...

  2. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 21.3.2006 (March-October course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language FrontPage 2003 - niveau 1 16 27-28.03.06 F Oracle Forms Developer 10g: Move to the Web 16 27-28.03.06 E ACCESS 2003 - Level 2: ECDL AM5 16 3-4.03.06 E-F JAVA 2 Enterprise Edition - Part 1: Web Applications 16 3-4.04.06 E JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans 24 5-7.04.06 E AutoCAD Mechanical 2006 16 11-12.04.06 F FrontPage 2003 - niveau 2 16 24-25.04.06 F C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming 24 25-27.04.06 E AutoCAD 2006 - niveau 1 32 27.04-4.05.06 F Oracle: SQL 24 3-5.05.06 E EXCEL 2003 (Short Course I) - HowTo... Work with formulae 3 4.05.06 (am) E-F EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing 3 4...

  3. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 7.2.2006 (February-May course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language WORD 2003 (Short Course II) - HowTo... Mail merge 3 13.03.06 E-F EXCEL 2003 (Short Course III) - HowTo... Pivot tables 3 20.03.06 E-F EXCEL 2003 (Short Course IV) - HowTo....Link cells, worksheets and workbooks 3 20.03.06 E-F Object-Oriented Analysis and Design using UML 24 21-23.03.06 E EXCEL 2003 - niveau 1 16 22-23.03.06 F FrontPage 2003 - niveau 1 16 27-28.03.06 F Oracle Forms Developer 10g: Move to the Web 16 27-28.03.06 E Oracle JDeveloper 10g: Build Applications with ADF 24 29-31.03.06 E ACCESS 2003 - Level 2: ECDL AM5 16 3-4.03.06 E-F JAVA 2 Enterprise Edition - Part 1: Web Applications 16 3-4.04.06 E JCOP: Control System Integration using JCOP Tools 24 4-6.04.06 E JAVA 2 Enterprise Edition...

  4. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 7.2.2006 (February-May course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language WORD 2003 (Short Course IV) - HowTo... Work with master document 3 27.02.06 E-F JAVA: Level 2 32 28.02-3.03.06 E Manipulation des images 4 28.02.06 F ACCESS 2003 - Level 2: ECDL AM5 16 2-3.03.06 E-F C++ for Particle Physicists 20 6-10.03.06 E PowerPoint 2003 8 9.03.06 F JCOP: Control System Integration using JCOP Tools 24 14-16.03.06 E EXCEL 2003 (Short Course III) - HowTo... Pivot tables 3 20.03.06 E-F EXCEL 2003 (Short Course IV) - HowTo....Link cells, worksheets and workbooks 3 20.03.06 E-F JCOP: Finite State Machines in the JCOP Framework 24 21-23.03.06 E Object-Oriented Analysis and Design using UML 24 21-23.03.06 E FrontPage 2003 - niveau 1 16 27-28.03.06 F JCOP: Joint PVSS-JCOP Fram...

  5. Design and construction of an interceptor system for radioactively contaminated solvent

    International Nuclear Information System (INIS)

    Weiss, T.G. Jr.; Blickwedehl, R.R.

    1991-01-01

    During the conduct of fuel reprocessing operations at the Western New York Nuclear Service Center from 1966 to 1972, the site operator disposed of spent solvent by shallow land burial in the area used for disposal of solid radioactive waste. The spent solvent was placed in twenty-two 3785 liter (1000-gallon) steel tanks which were then placed in eight 6-meter-deep burial holes. With the passage of time groundwater entered the tanks displacing the solvent (a mixture of tributyl phosphate and n-dodecane) and allowing it to enter the surrounding groundwater system. The solvent, which is lighter than water, floated to the surface of the groundwater within the burial holes and began to migrate laterally through cracks caused by weathering. In 1983, after the US Department of Energy (DOE) initiated efforts for the West Valley Demonstration Project (WVDP), trace amounts of solvent were encountered in a monitoring well near the perimeter of the burial area. Since the initial discovery, extensive studies and continued monitoring have been conducted of the solvent migration. In the fall of 1989, this monitoring showed evidence of further on-site migration of the solvent within the disposal area. In response, the DOE authorized West Valley Nuclear Services Company, Inc. (WVNS) to proceed with the design and construction of a trench system to intercept the flow of solvent and prevent it from discharging to nearby streams. Since the solvent and the contaminated groundwater samples taken in the area exhibited high levels of Iodine-129 in an organic complex, it was necessary to construct a pretreatment facility. An important aspect of the trench construction was the management of contaminated soil and construction water. Contaminated soils were placed into storage containers and held for future treatment and disposal. All water pumped from the trench during construction was stored in large bladder tanks, analyzed for hazardous constituents, and upon finding none, was discharged

  6. Restoring solvent for nuclear separation processes

    International Nuclear Information System (INIS)

    Reif, D.J.

    1987-01-01

    Solvent extraction separation processes are used to recover usable nuclear materials from spent fuels. These processes involve the use of an extractant/diluent (solvent) for separation of the reusable actinides from unwanted fission products. The most widely used processes employ tributyl phosphate as an extractant diluted with a normal-paraffin hydrocarbon. During use, the solvent is altered due to hydrolysis and radiolysis, forming materials that influence product losses, product decontamination, and separation efficiencies. In most processes, the solvent is recycled after cleaning. Solvent cleaning generally involves scrubbing with a sodium carbonate solution. Studies at the Savannah River Laboratory have shown that carbonate washing, although removing residual solvent activity, does not remove more solvent-soluble binding ligands (formed by solvent degradation), which hold fission products in the solvent. Treatment of the solvent with a solid adsorbent after carbonate washing removes binding ligands and significantly improves recycled solvent performance. Laboratory work to establish the advantage of adsorbent cleaning and the development of a full-scale adsorption process is described. The application of this process for cleaning the first cycle solvent of a Savannah River Plant production process is discussed

  7. Solvent Extraction of Furfural From Biomass

    Science.gov (United States)

    Humphrey, M. F.

    1984-01-01

    Solvent-extraction method reduces energy required to remove furfural produced during acid hydrolysis of biomass. Acid hydrolysis performed in vessel containing both solvents and reacting ingredients. With intimate contact between solvents and aqueous hydrolyis liqour, furfural removed form liquor almost as fast as it forms.

  8. Adaptive Resolution Simulation of MARTINI Solvents

    NARCIS (Netherlands)

    Zavadlav, Julija; Melo, Manuel N.; Cunha, Ana V.; de Vries, Alex H.; Marrink, Siewert J.; Praprotnik, Matej

    We present adaptive resolution dynamics simulations of aqueous and apolar solvents coarse-grained molecular models that are compatible with the MARTINI force field. As representatives of both classes solvents we have chosen liquid water and butane, respectively, at ambient temperature. The solvent

  9. 1. On note taking.

    Science.gov (United States)

    Plaut, Alfred B J

    2005-02-01

    In this paper the author explores the theoretical and technical issues relating to taking notes of analytic sessions, using an introspective approach. The paper discusses the lack of a consistent approach to note taking amongst analysts and sets out to demonstrate that systematic note taking can be helpful to the analyst. The author describes his discovery that an initial phase where as much data was recorded as possible did not prove to be reliably helpful in clinical work and initially actively interfered with recall in subsequent sessions. The impact of the nature of the analytic session itself and the focus of the analyst's interest on recall is discussed. The author then describes how he modified his note taking technique to classify information from sessions into four categories which enabled the analyst to select which information to record in notes. The characteristics of memory and its constructive nature are discussed in relation to the problems that arise in making accurate notes of analytic sessions.

  10. Oxidative Desulfurization of Gasoline by Ionic Liquids Coupled with Extraction by Organic Solvents

    OpenAIRE

    Abro, Rashid; Gao, Shurong; Chen, Xiaochun; Yu, Guangren; Abdeltawab, Ahmed A.; Al-Deyab, Salem S.

    2016-01-01

    In this work, desulfurization of real fluidized catalytic cracking (FCC) gasoline was investigated in dual steps; first in oxidative desulfurization (ODS) using imidazolium and pyrrolidonium based Brønsted acidic ionic liquids (ILs) as solvent and catalyst and hydrogen peroxide as oxidant. In second step, extractive desulfurization took place using organic solvents of furfural, furfural alcohol and ethylene glycol. Variety of factors such as temperature, time, mass ratio of oil/ILs and regene...

  11. The Solvent Selection framework: solvents for organic synthesis, separation processes and ionic-organic synthesis

    DEFF Research Database (Denmark)

    Mitrofanov, Igor; Sansonetti, Sascha; Abildskov, Jens

    2012-01-01

    This paper presents a systematic integrated framework for solvent selection and solvent design. The framework is divided into several modules, which can tackle specific problems in various solvent-based applications. In particular, three modules corresponding to the following solvent selection pr...

  12. Solvent cleaning system and method for removing contaminants from solvent used in resin recycling

    Science.gov (United States)

    Bohnert, George W [Harrisonville, MO; Hand, Thomas E [Lee's Summit, MO; DeLaurentiis, Gary M [Jamestown, CA

    2009-01-06

    A two step solvent and carbon dioxide based system that produces essentially contaminant-free synthetic resin material and which further includes a solvent cleaning system for periodically removing the contaminants from the solvent so that the solvent can be reused and the contaminants can be collected and safely discarded in an environmentally safe manner.

  13. Liquid phase solvent bonding of plastic microfluidic devices assisted by retention grooves.

    Science.gov (United States)

    Wan, Alwin M D; Sadri, Amir; Young, Edmond W K

    2015-01-01

    We report a novel method for achieving consistent liquid phase solvent bonding of plastic microfluidic devices via the use of retention grooves at the bonding interface. The grooves are patterned during the regular microfabrication process, and can be placed at the periphery of a device, or surrounding microfluidic features with open ports, where they effectively mitigate solvent evaporation, and thus substantially reduce poor bond coverage. This method is broadly applicable to a variety of plastics and solvents, and produces devices with high bond quality (i.e., coverage, strength, and microfeature fidelity) that are suitable for studies in physics, chemistry, and cell biology at the microscale.

  14. Emerging place image

    DEFF Research Database (Denmark)

    Ooi, Can-Seng; Peji´c Kristensen, Tatjana; Lomanová Pedersen, Zdenka

    2004-01-01

    and perceptions.This paper introduces the concept of the orientalist tourist gaze, and demonstrates howorientalism may manifest in tourism. Data on how these two countries are imagined werecollected in Denmark.Keywords: destination identity, host society-guest interaction, impact of tourism, orientalism......Tourism offers an arena through which a place identity is imagined, negotiated and contained.This paper compares the Czech Republic and Slovakia, and show how these countriesconstruct and assert their identities through tourism. They both share a common history asCzechoslovakia, however...

  15. Tourism Sociabilities and Place

    DEFF Research Database (Denmark)

    Bødker, Mads; Browning, David

    2013-01-01

    Proposing new design opportunities, this paper challenges received notions of tourism, arguing that tourism is fundamentally social and concerned with making place. This turn makes tourism not only a convenient testing ground for technology concepts, but increasingly also for more sensitive...... renderings of, and interventions in, tourism as a relational and social practice. Using examples from commercial, arts, and design projects, and providing excerpts from our own fieldwork and design workshops with tourists and locals, this paper outlines three challenges through a conceptual lens that we see...... as productive for appropriate interaction design of tourism technologies....

  16. Signs in Place

    DEFF Research Database (Denmark)

    Hamid, Salmiah Binti Abdul; Jensen, Ole B.; Silva, Victor

    Travelling in unfamiliar areas is usually very interesting, however it can also be stressful. People travel or move around in an urban space according to their needs, and the environment can also influence the way people move about from one place to another. If a person gets lost, a map or GPS can...... and geosemiotic studies with regards to the road traffic signs used in urban spaces. The paper ends with a discussion on how people choreograph their movement in their everyday life from two different perspectives: above vs. below....

  17. Signs In Place

    DEFF Research Database (Denmark)

    Hamid, Salmiah Binti Abdul; Jensen, Ole B.; Silva, Victor

    2012-01-01

    Travelling in unfamiliar areas is usually very interesting; however, it can also be stressful. People travel or move around in an urban space according to their needs, and the environment can influence the way people move about from one place to another. If a person gets lost, a map or GPS can...... and geosemiotic studies with regards to the road traffic signs used in urban spaces. The paper ends with a discussion on how people choreograph their movement in their everyday life from two different perspectives: above vs. below...

  18. Solvent-vapor-assisted dewetting of prepatterned thin polymer films: control of morphology, order, and pattern miniaturization.

    Science.gov (United States)

    Bhandaru, Nandini; Goohpattader, Partho Sarathi; Faruqui, Danish; Mukherjee, Rabibrata; Sharma, Ashutosh

    2015-03-17

    Ultrathin (dewet by the growth of surface instability, the wavelength (λ) of which depends on the film thickness (h(f)). While the dewetting of a flat polymer thin film results in random structures, we show that the dewetting of a prepatterned film results in myriad ordered mesoscale morphologies under specific conditions. Such a film undergoes rupture over the thinnest parts when the initial local thickness of these zones (h(rm)) is lower than a limiting thickness h(lim) ≈ 10 nm. Additionally, the width of the pattern grooves (l(s)) must be wider than λ(s) corresponding to a flat film having a thickness of h(rm) for pattern-directed dewetting to take place over surface-tension-induced flattening. We first present an experimentally obtained morphology phase diagram that captures the conditions where a transition from surface-tension-induced flattening to pattern-directed-rupture takes place. Subsequently, we show the versatility of this technique in achieving a variety of aligned mesopatterns starting from a prepatterned film with simple grating geometry. The morphology of the evolving patterns depends on several parameters such as the initial film thickness (h(f)), prepattern amplitude (h(st)), duration of solvent vapor exposure (SVE), and wettability of the stamp used for patterning. Periodic rupture of the film at regular intervals imposes directionality on the evolving patterns, resulting in isolated long threads/cylindrical ridges of polymers, which subsequently disintegrate into an aligned array of droplets due to Rayleigh-Plateau instability under specific conditions. Other patterns such as a double periodic array of droplets and an array of holes are also possible to obtain. The evolution can be interrupted at any intermediate stage by terminating the solvent vapor annealing, allowing the creation of pattern morphology on demand. The created patterns are significantly miniaturized in size as compared to features obtained from dewetting a flat film with

  19. Tackling the take-or-pay problem

    International Nuclear Information System (INIS)

    Jackson, Kim.

    1997-01-01

    Centrica, the gas sales, trading and services company previously part of British Gas plc, has renegotiated a number of its take-or-pay contracts with North Sea gas producers since the end of 1996. The contracts - a legacy of the British Gas monopoly era - had placed an increasing financial burden on the company as it was effectively forced to pay above-market prices for gas which it did not always want to take, while trying to remain competitive in a market where an ever growing number of independent gas suppliers were offering low-cost supplies. The author looks at how Centrica has tackled its take-or-pay problem. (author)

  20. Insecticide solvents: interference with insecticidal action.

    Science.gov (United States)

    Brattsten, L B; Wilkinson, C F

    1977-06-10

    Several commercial solvent mixtures commonly used as insecticide carriers in spray formulations increase by more than threefold the microsomal N-demethylation of p-chloro N-methylaniline in midgut preparations of southern army-worm (Spodoptera eridania) larvae exposed orally to the test solvents. Under laboratory conditions, the same solvent mixtures exhibit a protective action against the in vivo toxicity of the insecticide carbaryl to the larvae. The data are discussed with respect to possible solvent-insecticide interactions occurring under field conditions and, more broadly, to potential toxicological hazards of these solvents to humans.

  1. Organic solvents in electromembrane extraction: recent insights

    DEFF Research Database (Denmark)

    Huang, Chuixiu; Gjelstad, Astrid; Pedersen-Bjergaard, Stig

    2016-01-01

    the introduction. Under the influence of an electrical field, EME is based on electrokinetic migration of the analytes through a supported liquid membrane (SLM), which is an organic solvent immobilized in the pores of the polymeric membrane, and into the acceptor solution. Up to date, close to 150 research...... articles with focus on EME have been published. The current review summarizes the performance of EME with different organic solvents and discusses several criteria for efficient solvents in EME. In addition, the authors highlight their personal perspective about the most promising organic solvents for EME...... and have indicated that more fundamental work is required to investigate and discover new organic solvents for EME....

  2. Green analytical chemistry - the use of surfactants as a replacement of organic solvents in spectroscopy

    Science.gov (United States)

    Pharr, Daniel Y.

    2017-07-01

    This chapter gives an introduction to the many practical uses of surfactants in analytical chemistry in replacing organic solvents to achieve greener chemistry. Taking a holistic approach, it covers some background of surfactants as chemical solvents, their properties and as green chemicals, including their environmental effects. The achievements of green analytical chemistry with micellar systems are reviewed in all the major areas of analytical chemistry where these reagents have been found to be useful.

  3. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002: Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW hands-on (E):...

  4. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW base 1 : 25 - 27.2.2004(3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) LabVIEW hands-on (E) : 16.3.2004 (afternoon) LabVIEW Basics 1 : 22 - 24.3.2004 ...

  5. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study for Microsoft applications :12.2.2004 (morning) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) CLEAN-2002 ...

  6. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Pa...

  7. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Object-Oriented Design and Programming with C++ : 22 - 24.3.2005 (3 days) FileMaker - niveau 2 : 4 & 5.4.2005 (2 jours) EMAG-2004 - Electromagnetic Design and Mathematical Optimization in Magnet Technology: 4- 14.4.2005 (8 x 3h) EXCEL 2003 - niveau 2 : 11 & 12.4.2005 (2 jours) LabVIEW Intermediate 1: 11 - 13.4.2005 (3 days) ACCESS 2003 - Level 2 - ECDL AM5: 13 & 14.4.2005 (2 days) LabVIEW Intermediate 2: 14 & 15.4.2005 (2 days) PowerPoint 2003 (F) : 18.4.2005 (1 jour) Joint PVSS JCOP Framework : 25 - 29.4.2005 (5 days) WORD 2003 - niveau 1 : 2 & 3.5.2005 (2 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2002 - niveau 1 : 11, 12, 18 & 19.5.2005 (4 jour...

  8. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Outlook (short course I) : E-mail : 31.8.2004 (2 hours, morning) Introduction à Outlook : Outlook (short course II) : Calendar, Tasks and Notes : 31.8.2004 (2 hours, afternoon) Instructor-led WBTechT Study or Follow-up for Microsoft Applications : 7.9.2004 (morning) Outlook (short course III) : Meetings and Delegation : 7.9.2004 (2 hours, afternoon) Introduction au VHDL et utilisation du simulateur ...

  9. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Joint PVSS JCOP Framework : 9 - 13.8.2004 (5 days) Introduction à Outlook : 19.8.2004 (1 jour) Outlook (Short Course I): E-mail: 31.8.2004 (2 hours, morning) Outlook (Short Course II): Calendar, Tasks and Notes: 31.8.2004 (2 hours, afternoon) Instructor-led WBTechT Study or Follow-up for Microsoft Applications: 7.9.2004 (morning) Outlook (Short Course III): Meetings and Delegation: 7.9.2004 (2 hours, afternoon) I...

  10. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Joint PVSS JCOP Framework : 9 - 13.8.2004 (5 days) Introduction à Outlook : 19.8.2004 (1 jour) Outlook (Short Course I): E-mail: 31.8.2004 (2 hours, morning) Outlook (Short Course II): Calendar, Tasks and Notes: 31.8.2004 (2 hours, afternoon) Hands-on Introduction to Python Programming: 1 - 3.9.2004 (3 days - free course) Instructor-led WBTechT Study or Follow-up for Microsoft Applications: 7.9.20...

  11. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Introduction à ANSYS : 23 - 26.11.2004 (4 jours) FileMaker - niveau 1 : 23 - 26.11.2004 (4 jours) Project Planning with MS-Project : 25.11 & 2.12.2004 (2 days) Explicit Dynamics with ANSYS/LS-Dyna : 7 - 9.12.2004 (3 days) Introduction to PERL 5 : 8 & 9.12.2004 (2 days) PCAD Schémas - Débutants : 9 & 10.12.2004 (2 jours) The JAVA Programming Language Level 1 : 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) Introduction to the CERN EDMS : 18.1.2005 (1 day - free course) The CERN EDMS for Local Administrators : 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) CLEAN-2002 : Travaill...

  12. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Explicit Dynamics with ANSYS/LS-Dyna : 7 - 9.12.2004 (3 days) Introduction to PERL 5 : 8 & 9.12.2004 (2 days) PCAD Schémas - Débutants : 9 & 10.12.2004 (2 jours) Advanced aspects of PERL 5: 10.12.2004 (1 day) PCAD PCB – Débutants : 13 - 15.12.2004 (3 jours) The JAVA Programming Language Level 1 : 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) Introduction to the CERN EDMS : 18.1.2005 (1 day - free course) The CERN EDMS for Local Administrators : 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) CLEAN-2002 : Travailler en salle propre : 25.1.2005 (après-midi, cours gratuit) Compatibilit&eac...

  13. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: FileMaker - niveau 1 : 23 - 26.11.2004 (4 jours) Explicit Dynamics with ANSYS/LS-Dyna : 7 - 9.12.2004 (3 days) Introduction to PERL 5 : 8 & 9.12.2004 (2 days) PCAD Schémas - Débutants : 9 & 10.12.2004 (2 jours) Advanced aspects of PERL 5: 10.12.2004 (1 day) PCAD PCB – Débutants : 13 - 15.12.2004 (3 jours) The JAVA Programming Language Level 1 : 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) Introduction to the CERN EDMS : 18.1.2005 (1 day - free course) The CERN EDMS for Local Administrators : 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) CLEAN-2002 : Travailler en salle propre : 25.1.2005 ...

  14. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) Word 2003 - niveau 1 : 22 & 23.11.2004 (2 jours) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) Project Planning with MS-Project : 25.11 & 2.12.2004 (2 days) Explicit Dynamics with ANSYS/LS-Dyna : 7 - 9.12.2004 (2 days) PCAD Schémas - Débutants : 9 & 10.12.2004 (2 jours) The JAVA Programming Language Level 1 : 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) CLEAN-2002 : Travailler en salle propre : 25.1.2005 (après-midi, cours gratuit) Compatibilité électromagnétique (CEM) : installation et remèdes : 25 - 27.1.2005 (3 jours) Finite State Machines in the JCOP Fr ...

  15. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW...

  16. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.09.2004 (4 jours) Introduction to the CERN EDMS : 22.6.2004 (1 day) The CERN EDMS for local administrators : 23 & 24.6.2004 (2 days) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 - 8.7.2004 (3 jours) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING...

  17. Technical Training: Places available

    CERN Document Server

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Joint PVSS JCOP Programming : 9 - 13.8.2004 (5 days) Hands-on Introduction to Python Programming: 1 - 3.9.2004 (3 days - free course) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) Joint PVSS JCOP Programming : 13 - 17.9.2004 (5 days) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.9.2004 (4 jours) Programmation STEP7 niveau 1 : 14-17.9.2004 (4...

  18. Technical Training: Places available**

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 : 9 & 10.1.2004 (2 days) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions) LabVIEW hands-on (E) 16.3...

  19. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Hands-on Introduction to Python Programming: 1 - 3.9.2004 (3 days - free course) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.9.2004 (4 jours) Programmation STEP7 niveau 1 : 14-17.9.2004 (4 jours) FrontPage 2003 - niveau 1 : 20 & 21.9.2004 (2 jours) Word 2003 - niveau 2 : 27 & 28.9.2004 (2 jours) Introduction à Wind...

  20. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Introduction to the CERN EDMS : 22.6.2004 (1 day) The CERN EDMS for local administrators : 23 & 24.6.2004 (2 days) Compatibilité électromagnétique (CEM) - Introduction / Electromagnetic Compatibility (EMC) - Introduction: 7.7.2004 (morning) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.9.2004 (4 jours) Programmation STEP...

  1. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) Word 2003 - niveau 1 : 22 & 23.11.2004 (2 jours) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) CLEAN-2002 - Travailler en salle propre : 23.11.2004 (après-midi, cours gratuit) Project Planning with MS-Project : 25.11 & 2.12.2004 (2 days) ENSEIGNEMENT ...

  2. Technical training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) Word 2003 - niveau 1 : 22 & 23.11.2004 (2 jours) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) Project Planning with MS-Project : 25.11 & 2.12.2004 (2 days) Introduction to PERL 5 : 8 & 9.12.2004 (2 days) Advanced aspects of PERL 5 : 10.12.2004 (1 day) The JAVA Programming Language Level 1 : 11 & 12.1.2005 (2 days) Introduction...

  3. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Project Planning with MS-Project :6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1: 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1 : 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL : 2 - 4.6.2...

  4. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) Introduction à Dreamweaver MX :  3 - 4.10.2005 (2 jours) Utilisation des fichiers PDF avec Acrobat 7.0 :   4.10.2005 (1 journée) LaTeX par la pratique :   4 - 6.10.2005 (3 matinées) PowerPoint 2003 (F) :  7.10.2005 (1 journée) FileMaker - niveau 1 :  20 - 21.10.2005 (2 jours) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11....

  5. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    Le nombre de places disponibles peut varier. Veuillez consulter notre site Web pour avoir la dernière mise à jour. Des places sont disponibles dans les cours suivants :   Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) Introduction à Dreamweaver MX :  3 - 4.10.2005 (2 jours) Utilisation des fichiers PDF avec Acrobat 7.0 :   4.10.2005 (1 journée) LaTeX par la pratique :   4 - 6.10.2005 (3 matinées) PowerPoint 2003 (F) :  7.10.2005 (1 journée) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (...

  6. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) Introduction à Dreamweaver MX :  3 - 4.10.2005 (2 jours) Utilisation des fichiers PDF avec Acrobat 7.0 :   4.10.2005 (1 journée) LaTeX par la pratique :   4 - 6.10.2005 (3 matinées) PowerPoint 2003 (F) :  7.10.2005 (1 journée) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with Auto...

  7. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework: 8 - 12.8.2005 (5 days) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1 : 5 - 7.9.2005 (3 days, dates to be confirmed) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) MAGNE-05 - Magn&...

  8. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1:  5 - 7.9.2005 (3 days) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2...

  9. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework: 8 - 12.8.2005 (5 days) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1 : 5 - 7.9.2005 (3 days, dates to be confirmed) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framew...

  10. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language AutoCAD Mechanical 2006 16 30 to 31-01-06 F DIAdem : base 24 01 to 03-02-06 F ACROBAT 7.0 : Utilisation de fichiers PDF 8 06-02-06 F Manipulation des images 4 08-02-06 F OUTLOOK 2003 (Short Course I) - E-mail 3 09-02-06 E-F WORD 2003 (Short Course II) - HowTo... Mail merge 3 09-02-06 E-F ACCESS 2003 - Level 1: ECDL M5 16 13 to 14-02-06 E-F JCOP: Control System Integration using JCOP Tools 24 14 to 16-02-06 E OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 16-02-06 E-F WORD 2003 (Short Course III) - HowTo... Work with long documents 3 16-02-06 E-F FrontPage 2003 - niveau 1 16 23 to 24-02-06 F OUTLOOK 2003 (Short Course III) - Meetings and Delegation 3 27-02-06 E-F WORD 2003 (Short Course IV) - HowTo... Work with master document 3 27-02-06 E-F ...

  11. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language ACCESS 2003 - Level 2: ECDL AM5 16 19 to 20-01-06 E-F AutoCAD 2006 - niveau 1 32 19 to 25-01-06 F C++ Programming Advanced - Traps and Pitfalls 32 24 to 27-01-06 E STEP7 : Level 1 32 24 to 27-01-06 E LabVIEW Basics 2 16 26 to 27-01-06 E AutoCAD Mechanical 2006 16 30 to 31-01-06 F DIAdem : base 24 01 to 03-02-06 F FrontPage 2003 - niveau 1 16 02 to 03-02-06 F ACROBAT 7.0 : Utilisation de fichiers PDF 8 06-02-06 F Manipulation des images 4 08-02-06 F OUTLOOK 2003 (Short Course I) - E-mail 3 09-02-06 E-F WORD 2003 (Short Course II) - HowTo... Mail merge 3 09-02-06 E-F ACCESS 2003 - Level 1: ECDL M5 16 13 to 14-02-06 E-F JCOP: Control System Integration using JCOP Tools 24 14 to 16-02-06 E OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Note...

  12. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW base 1 : 5 - 7.9.2005 (3 jours) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechniq...

  13. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introduction to ANSYS: 21 - 24.6.2005 (4 days) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) ACCESS 2003 - Level 2 - ECDL AM5: 5 - 8.7.2005 (4 mornings) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 7.7.2005 (afternoon) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 8.7.2005 (aftern...

  14. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 6.7.2005 (morning) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 7.7.2005 (morning) OUTLOOK (Short Course III) - Meetings and Delegation: 8.7.2005 (morning) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 7.7.2005 (afternoon) EXCEL 2003 (Short Course II) - HowTo... Format y...

  15. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP : 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003 : 30.6.2005 (IT Technical Training Tutorial, free of charge) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoC...

  16. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 28.6 - 1.7.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) ACCES...

  17. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework: 8 - 12.8.2005 (5 days) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1 : 5 - 7.9.2005 (3 days, dates to be confirmed) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) LabVIEW Application Development (Intermediate I): 5 - 7.12.2005 (3 days) LabVIEW Advanced Programming (Intermediate 2): 8 - 9.12.2005 (2 days) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

  18. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1: 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) The CERN EDMS for Local Administrators: 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) LabVIEW base 1/basics 1 : 31.1 - 1.2.2005 (2 j size="2">LabVIEW base 2/basics 2 : 3 & 4.2.2005 (2 jours/2 days - langue à décider/language to be decided) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9.2.2005 (3 days) C++ Programming Advanced -Traps and Pitfalls: 8 - 11.2.2005 (4 days) Joint PVSS JCOP Framework: 14 - 18.2.2005 (5 days) JAVA 2 Enterprise Edition - Part 1: ...

  19. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) Utilisation des fichiers PDF avec Acrobat 7.0 :   4.10.2005 (1 journée) LaTeX par la pratique :   4 - 6.10.2005 (3 matinées) PowerPoint 2003 (F) :  7.10.2005 (1 journée) FileMaker - niveau 1 :  20 - 21.10.2005 (2 jours) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) Finite State Machines in the JCOP Framework : 25 - 27.10.2005 (3 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11.2005 (afternoon) FrontPage 2003 - niveau 1 :  3 - 4.11.2005 (2 jours) AutoCAD 2006 - niveau 1 : 3, 4, 9, 10.11.2005 (4 jours) Joint PVSS JCO...

  20. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) Word 2003 - niveau 1 : 22 & 23.11.2004 (2 jours) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) CLEAN-2002 - Travailler en salle propre : 23.11.2004 (après-midi, cours gratuit) Project Planning with MS-Project : 25.11 & 2.12.2004 (2 days) PCAD Sch&eac...

  1. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FileMaker - niveau 1 :  20 - 21.10.2005 (2 jours) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) Finite State Machines in the JCOP Framework : 25 - 27.10.2005 (3 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11.2005 (afternoon) FrontPage 2003 - niveau 1 :  3 - 4.11.2005 (2 jours) AutoCAD 2006 - niveau 1 : 3, 4, 9, 10.11.2005 (4 jours) Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Joint PVSS JCOP Framework : 21 - 25.11.2005 (5 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11....

  2. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FileMaker - niveau 1 :  20 - 21.10.2005 (2 jours) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) Finite State Machines in the JCOP Framework : 25 - 27.10.2005 (3 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11.2005 (afternoon) FrontPage 2003 - niveau 1 :  3 - 4.11.2005 (2 jours) AutoCAD 2006 - niveau 1 : 3, 4, 9, 10.11.2005 (4 jours) Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Joint PVSS JCOP Framework : 21 - 25.11.2005 (5 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : ...

  3. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1:  5 â€" 7.9.2005 (3 days) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) OU...

  4. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1: 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) ELEC-2005.:Winter term: Introduction to electronics in HEP: 18, 20, 25, 27.1, 1 & 3.2.2005 (6 x 2h lectures) The CERN EDMS for Local Administrators: 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) CLEAN-2002 : Travailler en salle propre : 25.1.2005 (après-midi, cours gratuit) Compatibilité électromagnétique (CEM) : installation et remèdes : 25 - 27.1.2005 (3 jours) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9...

  5. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: The CERN EDMS for Local Administrators: 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (9 demi-journées) LabVIEW base 1/basics 1 : 31.1 - 2.2.2005 (3 jours/3 days - langue à décider/language to be decided) LabVIEW base 2/basics 2 : 3 & 4.2.2005 (2 jours/2 days - langue à décider/language to be decided) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9.2.2005 (3 days) C++ Programming Advanced -Traps and Pitfalls: 8 - 11.2.2005 (4 days) Joint PVSS JCOP Framework: 14 - 18.2.2005 (5 days) JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) ELEC-2005 â...

  6. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW base 1/basics 1 : 31.1 - 2.2.2005 (3 jours/3 days - langue à décider/language to be decided) LabVIEW base 2/basics 2 : 3 & 4.2.2005 (2 jours/2 days - langue à décider/language to be decided) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9.2.2005 (3 days) C++ Programming Advanced -Traps and Pitfalls: 8 - 11.2.2005 (4 days) Joint PVSS JCOP Framework: 14 - 18.2.2005 (5 days) JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) FrontPage 2003 - niveau 1 : 21 & 22.2.2005 (2 jours) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) ELEC-2005 - Spring Term: Integrated circuits and VLSI technology...

  7. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Joint PVSS JCOP Framework : 9 - 13.8.2004 (5 days) Outlook (I): E-mail : 31.8.2004 (2 hours, morning) Outlook (II): Calendar, Tasks and Notes : 31.8.2004 (2 hours, afternoon) Hands-on Introduction to Python Programming : 1 - 3.9.2004 (3 days - free course) Instructor-led WBTechT Study or Follow-up for Microsoft Applications : 7.9.2004 (morning) Outlook (III): Meetings and Delegation : 7.9.2004 (2 hours, afternoon) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) Joint PVSS JCOP Framework : 13 - 17.9.2004 (5 days) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.9.2004 (4 jours) Programmation STEP7 niveau 1 : 14 - 17.9.2004 (4 jours) FrontPage 2003 - niveau 1 : 20 & 21.9.2004 (2 jours) ANSYS: Thermal Analysis : 22 - 24.9.2004 (3 days) ANSYS: Advanced Topics : 27.9...

  8. Technical Training: Places available

    CERN Document Server

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT Study or Follow-up for Microsoft Applications : 7.9.2004 7.9.2004 Outlook (short course III) : Meetings and Delegation : 7.9.2004 (2 hours, afternoon) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) Joint PVSS JCOP Framework : 13 - 17.9.2004 (5 days) Programmation STEP7 niveau 1 : 14-17.9.2004 (4 jours) ANSYS : Thermal Analysis : 22 - 24.9.2004 (3 days) LabVIEW Migration 6 à 7 : 23.9.2004 (one day) ANSYS : Advanced Topics : 27.9 - 1.10.2004 (5 days) Word 2003 - niveau 2 : 27 & 28.9.2004 (2 jours) LabVIEW - Basics 1 : 27 - 29.9.2004 (3 days) MAGNE-04 : Magnétisme pour l'électrotechnique : 28 - 30.9.2004 (3 jours) LabVIEW - Basics 2 : 30.9 & 1.10.2004 (2 days) Introduction à Windows XP au CERN : 4.10.2004 (matin) ...

  9. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Programmation STEP7 niveau 1 : 14-17.9.2004 (4 jours) ANSYS : Thermal Analysis : 22 - 24.9.2004 (3 days) LabVIEW Migration 6 à 7 : 23.9.2004 (one day) ANSYS : Advanced Topics : 27.9 - 1.10.2004 (5 days) Word 2003 - niveau 2 : 27 & 28.9.2004 (2 jours) LabVIEW - Basics 1 : 27 - 29.9.2004 (3 days) MAGNE-04 : Magnétisme pour l'électrotechnique : 28 - 30.9.2004 (3 jours) LabVIEW - Basics 2 : 30.9 & 1.10.2004 (2 days) Introduction à Windows XP au CERN : 4.10.2004 (matin) FrontPage 2003 - niveau 1 : 7 & 8.10.04 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924...

  10. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo (4 mornings) EXCEL 2003 (Short Course I) - HowTo... Work ...

  11. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Oracle 9i : New features for developers : 14 - 16.6.2004 (3 days) The Joint PVSS JCOP Framework: 14 - 18.6.2004 (5 days) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 15 & 16.6.2004 (2 jours) EXCEL 2003 - niveau 2 : 17 & 18.6.2004 (2 jours) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 au 8.7.2004 (3 jours) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.09.2004 (4 jours) ENSEIGNEMEN...

  12. Technical Training: Places Available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Oracle 9i: SQL: 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9i : New f...

  13. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) VisualEliteHDL : 25 & 26.5.2004 (2 days) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9...

  14. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Utilisation des fichiers PDF avec ACROBAT 6.0 : 1.3.2005 (1 journée) ELEC-2005 - Spring Term: Integrated circuits and VLSI technology for physics: 1 - 17.3.2005 (6 x 2.5-hour lectures) C++ for Particle Physicists: 7 - 11.3.2005 (6 x 3-hour lectures) Joint PVSS JCOP Framework : 14 - 18.3.2005 (5 days) AXEL-2005; Introduction to Particle Accelerators : 14- 18.3.2005 (10 x 1 h lectures) ACCESS 2003 - Level 1: ECDL M5: 15 - 16.3.2005 (2 days) AutoCAD 2002 - niveau 1 : 15, 16, 21& 22.3.2005 (4 jours) FrontPage 2003 - niveau 2 : 21 & 22.3.2005 (2 jours) Hands-on Object-Oriented Design and Programming with C++ : 22 - 24.3.2005 (3 days) FileMaker - niveau 2 : 4 & 5.4.2005 (2 jours) EXCEL 2003 - niveau 2 : 11 & 12.4.2005 (2 jours) LabVIEW Intermediate 1: 11 - 13.4.2005...

  15. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) FrontPage 2003 - niveau 1 : 21 & 22.2.2005 (2 jours) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) Utilisation des fichiers PDF avec ACROBAT 6.0 : 1.3.2005 (1 journée) Hands-on Object-Oriented Design and Programming with C++ : 1 - 3.3.2005 (3 days) ELEC-2005 - Spring Term: Integrated circuits and VLSI technology for physics: 1 - 17.3.2005 (6 x 2.5-hour lectures) C++ for Particle Physicists: 7 - 11.3.2005 (6 x 3-hour lectures) Joint PVSS JCOP Framework : 14 - 18.3.2005 (5 days) ACCESS 2003 - Level 1 : 15 - 16.3.2005 (2 days) AutoCAD 2002 - niveau 1 : 15, 16, 21& 22.3.2005 (4 jours) FrontPage 2003 - niveau 2 : 21 & 22.3.2005 (2 jours) FileMaker - ...

  16. THE PLACES FOR PARTICIPATION

    Directory of Open Access Journals (Sweden)

    Tania Carson

    2007-09-01

    Full Text Available The current upsurge of interest in street art with its direct approach to the city emphasizes the need to readdress public arts’ role within the wider social and cultural context. As it becomes routine to incorporate art works into city planning and city life, art has become both ‘safe’ and ‘user‐friendly’. On the one hand, art is subsumed and immersed into the wider culture through leisure and entertainment policies, socially engaged public art projects, community art and urban design. On the other hand, there are those works which deliberately intend to unsettle or confront the viewer. In recent years the term intervention has been ascribed to unorthodox art works in the public sphere which are often illicit, or at least non‐complicit in the prevailing hegemony. These practices are disruptive due to their enactment outside traditional art spaces, often in the streets. By occupying the streets, places of democracy and disjunction, these interventions transform public space back into a place of overt cultural and political expression. They also deliberately involve the inhabitants of the city by utilizing everyday spaces in ways which offer an unmediated sense of the artwork.

  17. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 1 : 9 & 10.5.2005 (2 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2005 - niveau 1 : 12, 13, 18, 19.5.2005 (4 jours) ACCESS 2003 - Level 1: ECDL M5 : 11 & 12.5.2005 (2 days) Object-Oriented Analysis and Design using UML: 17 - 19.5.2005 (3 days) Synplify Pro Training: 18.5.2005 (1 day) Finite State Machines in the JCOP Framework: 24 - 26.5.2005 (3 days) The Joint PVSS JCOP Framework: 30.5 - 3.6.2005 (5 days) Introduction à la CAO CADENCE : 31.5 - 1.6.2005 (2 jours) LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Intr...

  18. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 1 : 9 & 10.5.2005 (2 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2005 - niveau 1 : 11, 12, 18, 19.5.2005 (4 jours) Object-Oriented Analysis and Design using UML: 17 - 19.5.2005 (3 days) Synplify Pro Training: 18.5.2005 (1 day) Finite State Machines in the JCOP Framework: 24 - 26.5.2005 (3 days) The Joint PVSS JCOP Framework: 30.5 - 3.6.2005 (5 days) Introduction à la CAO CADENCE : 31.5 - 1.6.2005 (2 jours) LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introductio...

  19. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : 30.11.2005 (afternoon) FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) Introduction à ANSYS Classique : 6 - 9.12.2005 (4 jours) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 7.12.2005 (morning) PCAD Schémas - Introduction : 8 - 9.12.2005 (2 jours) ACCESS 2003 - Level 2 - ECDL AM5: 14 - 15.12.2005 (2 days) LabVIEW Basics I:  23 - 25.1.2006 (3 days) C++ Programming Advanced - Traps and Pitfalls: 24 - 27.1.2006 (4 days) LabVIEW Basics II:  26 - 27.1.2006 (2 days) Joint PVSS-JCOP Framework: 30.1 - 3.2.2006 (5 days, free of charge) Finite State Machines in the JCOP Framework : ...

  20. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) Introduction à ANSYS Classique : 6 - 9.12.2005 (4 jours) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 7.12.2005 (morning) PCAD Schémas - Introduction : 8 - 9.12.2005 (2 jours) Finite State Machines in the JCOP Framework: 13 - 15.12.2005 (3 days) ACCESS 2003 - Level 2 - ECDL AM5: 14 - 15.12.2005 (2 days) PCAD PCB - Introduction : 14 - 16.12.2005 (3 jours) AutoCAD 2006 - niveau 1 : 19, 20, 24 & 25.1.2006 (4 jours) LabVIEW Basics I:  23 - 25.1.2006 (3 days) C++ Programming Advanced - Traps and Pitfalls: 24 - 27.1.2006 (4 days) STEP7 Programming Level 1: 24 - 27.1.2006 (4 days) LabVIEW Basics II:  26 - 27.1.2006 (2 days) AutoCAD Mechanical 2006 : 30 - 31.1.2006 (2 jours; suite du cours AutoCAD 2006 - niveau 1) Joint PVS...

  1. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) Finite State Machines in the JCOP Framework : 25 - 27.10.2005 (3 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) Introduction to the CERN EDMS: 2.11.2005 (1 day, free of charge) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11.2005 (afternoon) FrontPage 2003 - niveau 1 :  3 - 4.11.2005 (2 jours) AutoCAD 2006 - niveau 1 : 3, 4, 9, 10.11.2005 (4 jours) Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) The CERN EDMS for Engineers: 8.11.2005 (1 day, free of charge) The EDMS-MTF in practice: 9.11.2005 (morning, free of charge) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: ...

  2. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 30.11.2005 (afternoon) FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) Introduction à ANSYS Classique : 6 - 9.12.2005 (4 jours) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 7.12.2005 (morning) AutoCAD - mise à jour d’AutoCAD 2002 à AutoCAD 2006 : 8.12.2005 (1 journée - pour les utilisateurs d’AutoCAD 2002) PCAD Schémas - Introduction : 8 - 9.12.2005 (2 jours) Finite State Machines in the JCOP Framework: 13 - 15.12.2005 (3 days) PCAD PCB - Introduction : 14 - 16.12.2005 (3 jours) ACCESS 2003 - Level 2 - ECDL AM5: 14 - 15.12.2005 (2 days) AutoCAD 2006 - niveau 1 : 19, 20, 24 & 25.1.2006 (4 jours) LabVIEW Basics I:  23 - 25.1.2006...

  3. TECHNICAL TRAINING: PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW Basics 1 : 22 - 24.3.2004 (3 days) Oracle 9i : New Features for Developers : 22 - 24.3.2004 (3 days) Instructor-led WBTechT study or follow-up for Microsoft applications : 1.4.2004 (morning) FrontPage XP - niveau 1 : 5 & 6.4.2004 (2 jours) AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 days) LabVIEW hands-on (E) : 20.4.2004 (afternoon, free of charge) FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Word XP - niveau 1 : 10 & 11.5.2004 (2 jours) Word XP - niveau 2 : 24 & 25.5.2004 (2 jours) If you wish to participate in one of these courses, pleas...

  4. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 1.4.2004 (morning) FrontPage XP - niveau 1 : 5 & 6.4.2004 (2 jours) AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 day...

  5. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) FrontPage 2003 - niveau 1 : 21 & 22.2.2005 (2 jours) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) Utilisation des fichiers PDF avec ACROBAT 6.0 : 1.3.2005 (1 journée) ELEC-2005 - Spring Term: Integrated circuits and VLSI technology for physics: 1 - 17.3.2005 (6 X 2.30-hours lectures) C++ for Particle Physicists: 7 - 11.3.2005 (6 X 3-hour lectures) Joint PVSS JCOP Framework : 14 - 18.3.2005 (5 days) AutoCAD 2002 - niveau 1 : 15, 16, 21& 22.3.2005 (4 jours) FrontPage 2003 - niveau 2 : 21 & 22.3.2005 (2 jours) FileMaker - niveau 2 : 4 & 5.4.2005 (2 jours) EXCEL 2003 - niveau 2 : 11 & 12.4.2005 (2 jours) LabVIEW intermediate 1: 11 - 13....

  6. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW base 2/basics 2 : 3 & 4.2.2005 (2 jours/2 days - langue à décider/language to be decided) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9.2.2005 (3 days) JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) FrontPage 2003 - niveau 1 : 21 & 22.2.2005 (2 jours) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) ELEC-2005 - Spring Term: Integrated circuits and VLSI technology for physics: 1 - 17.3.2005 (6 X 2.30-hours lectures) C++ for Particle Physicists: 7 - 11.3.2005 (6 X 3-hour lectures) Joint PVSS JCOP Framework : 14 - 18.3.2005 (5 days) AutoCAD 2002 - niveau 1 : 15, 16, 21& 22.3.2005 (4 jours) FrontPage 20...

  7. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: ELEC-2005 - Spring Term: Integrated circuits and VLSI technology for physics: 1 - 17.3.2005 (6 x 2.5-hour lectures) C++ for Particle Physicists: 7 - 11.3.2005 (6 x 3-hour lectures) Joint PVSS JCOP Framework : 14 - 18.3.2005 (5 days) Oracle 9i: SQL: 14 -16.3.2005 (3 days) AXEL-2005; Introduction to Particle Accelerators : 14- 18.3.2005 (10 x 1 h lectures) ACCESS 2003 - Level 1: ECDL M5: 15 - 16.3.2005 (2 days) AutoCAD 2002 - niveau 1 : 15, 16, 21& 22.3.2005 (4 jours) FrontPage 2003 - niveau 2 : 21 & 22.3.2005 (2 jours) Hands-on Object-Oriented Design and Programming with C++ : 22 - 24.3.2005 (3 days) FileMaker - niveau 2 : 4 & 5.4.2005 (2 jours) Oracle 9i: Programming with PL/SQL: 4 - 6.4.2005 (3 days) EXCEL 2003 - niveau 2 : 11 & 12.4.2005 (2 jours) LabVIEW Intermedia...

  8. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 - 30.4.2004 (5 days) Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Pla...

  9. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Planning with MS-Project : 6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 10 - 12.5.2004 (3...

  10. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 days) LabVIEW Hands-on : 20.4.2004 (half-day, p.m.) FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 -...

  11. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The CERN EDMS for Engineers : 6.10.2004 (1 day) FileMaker - niveau 1 : 18 & 19.10.2004 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Excel 2003 - niveau 1 : 4 & 5.11.2004 (2 jours) LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions...

  12. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW - Basics 2 : 30.9 & 1.10.2004 (2 days) Introduction à Windows XP au CERN : 4.10.2004 (matin) The EDMS MTF in practice : 4.10.2004 (afternoon) The CERN EDMS for Engineers : 6.10.2004 (1 day) FrontPage 2003 - niveau 1 : 7 & 8.10.04 (2 jours) Hands-On Object Oriented Design and Programming with C++ : 9 - 12.11.2004 (3 days) FileMaker - niveau 1 : 18 & 19.10.2004 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Excel 2003 - niveau 1 : 4 & 5.11.2004 (2 jours) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Outlook (Short Course III) : Meetings and Delegation : 9.11...

  13. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: FileMaker - niveau 1 : 18 & 19.10.2004 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Excel 2003 - niveau 1 : 4 & 5.11.2004 (2 jours) LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) FrontPage 2003 - niveau 2 : 18 &a...

  14. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Excel 2003 - niveau 1 : 4 & 5.11.2004 (2 jours) LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) FrontPage 2003 - niveau 2 : 18 & 19.11.2004 (2 jours) Word 2003 - niveau 1 : 22 &a...

  15. TECHNICAL TRAINING: Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Hands-on Introduction to Python Programming : 12 - 14.11.03(3 days) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) C++ for Particle Physicists : 17 - 21.11.03 (6 X 3-hour lectures) Programmation automate Schneider TSX Premium - niveau 2 : 18 - 21.11.03 (4 jours) Project Planning with MS-Project  (free of charg...

  16. TECHNICAL TRAINING: Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval Tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The EDMS-MTF in practice (free of charge) : 28 -  30.10.03 (6 half-day sessions) AutoCAD 2002 – Level 1 : 3, 4, 12, 13.11.03 (4 days) LabVIEW TestStand ver. 3 : 4 & 5.11.03 (2 days) Introduction to PSpice : 4.11.03 p.m. (half-day) Hands-on Introduction to Python Programming : 12 – 14.11.03 (3 days) ACCESS ...

  17. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: ELEC-2005 Autumn Term - Electronics applications in HEP experiments: 8.11 - 8.12.2005 (10 x 2h lectures) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Hands-On Object Oriented Design and Programming with C++ : 16 - 18.11.2005 (3 days) The CERN EDMS for Engineers: 17.11.2005 (1 day, free of charge) The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) Hands-on Introduction to Python Programming: 28 - 30.11.2005 (3 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : 30.11.2005 (afternoon) FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) LabVIEW Application Development (Intermediate 1): 5 - 7.12.2005 (3 d...

  18. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) ELEC-2005 Autumn Term - Electronics applications in HEP experiments: 8.11 - 8.12.2005 (10 x 2h lectures) The EDMS-MTF in practice: 9.11.2005 (morning, free of charge) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Hands-On Object Oriented Design and Programming with C++ : 16 - 18.11.2005 (3 days) The CERN EDMS for Engineers: 17.11.2005 (1 day, free of charge) The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) Hands-on Introduction to Python Programming: 28 - 30.11.2005 (3 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : 30.11.2005 (afternoon) Fron...

  19. Technical training: places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Introduction to the CERN EDMS: 2.11.2005 (1 day, free of charge) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11.2005 (afternoon) FrontPage 2003 - niveau 1 :  3 - 4.11.2005 (2 jours) AutoCAD 2006 - niveau 1 : 3, 4, 9, 10.11.2005 (4 jours) Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) The CERN EDMS for Engineers: 8.11.2005 (1 day, free of charge) The EDMS-MTF in practice: 9.11.2005 (morning, free of charge) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Hands-On Object Oriented Design and Programming with C++ : 16 - 18.11.2005 (3 days) The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) Hands-on Introduction to Python Prog...

  20. Constrained Unfolding of a Helical Peptide: Implicit versus Explicit Solvents.

    Directory of Open Access Journals (Sweden)

    Hailey R Bureau

    Full Text Available Steered Molecular Dynamics (SMD has been seen to provide the potential of mean force (PMF along a peptide unfolding pathway effectively but at significant computational cost, particularly in all-atom solvents. Adaptive steered molecular dynamics (ASMD has been seen to provide a significant computational advantage by limiting the spread of the trajectories in a staged approach. The contraction of the trajectories at the end of each stage can be performed by taking a structure whose nonequilibrium work is closest to the Jarzynski average (in naive ASMD or by relaxing the trajectories under a no-work condition (in full-relaxation ASMD--namely, FR-ASMD. Both approaches have been used to determine the energetics and hydrogen-bonding structure along the pathway for unfolding of a benchmark peptide initially constrained as an α-helix in a water environment. The energetics are quite different to those in vacuum, but are found to be similar between implicit and explicit solvents. Surprisingly, the hydrogen-bonding pathways are also similar in the implicit and explicit solvents despite the fact that the solvent contact plays an important role in opening the helix.

  1. Photonic crystal based sensor for organic solvents and for solvent-water mixtures.

    Science.gov (United States)

    Fenzl, Christoph; Hirsch, Thomas; Wolfbeis, Otto S

    2012-12-12

    Monodisperse polystyrene nanoparticles with a diameter of 173 nm were incorporated into a polydimethylsiloxane matrix where they display an iridescent color that can be attributed to the photonic crystal effect. The film is of violet color if placed in plain water, but turns to red in the presence of the non-polar solvent n-hexane. Several solvents were studied in some detail. We show that such films are capable of monitoring the water content of ethanol/water mixtures, where only 1% (v/v) of water leads to a shift of the peak wavelength of reflected light by 5 nm. The method also can be applied to determine, both visually and instrumentally, the fraction of methanol in ethanol/methanol mixtures. Here, a fraction of 1% of methanol (v/v) results in a wavelength shift of 2 nm. The reflected wavelength is not influenced by temperature changes nor impeded by photobleaching. The signal changes are fully reversible and response times are <1 s.

  2. Photonic Crystal Based Sensor for Organic Solvents and for Solvent-Water Mixtures

    Directory of Open Access Journals (Sweden)

    Otto S. Wolfbeis

    2012-12-01

    Full Text Available Monodisperse polystyrene nanoparticles with a diameter of 173 nm were incorporated into a polydimethylsiloxane matrix where they display an iridescent color that can be attributed to the photonic crystal effect. The film is of violet color if placed in plain water, but turns to red in the presence of the non-polar solvent n-hexane. Several solvents were studied in some detail. We show that such films are capable of monitoring the water content of ethanol/water mixtures, where only 1% (v/v of water leads to a shift of the peak wavelength of reflected light by 5 nm. The method also can be applied to determine, both visually and instrumentally, the fraction of methanol in ethanol/methanol mixtures. Here, a fraction of 1% of methanol (v/v results in a wavelength shift of 2 nm. The reflected wavelength is not influenced by temperature changes nor impeded by photobleaching. The signal changes are fully reversible and response times are <1 s.

  3. Teachable Moment: Google Earth Takes Us There

    Science.gov (United States)

    Williams, Ann; Davinroy, Thomas C.

    2015-01-01

    In the current educational climate, where clearly articulated learning objectives are required, it is clear that the spontaneous teachable moment still has its place. Authors Ann Williams and Thomas Davinroy think that instructors from almost any discipline can employ Google Earth as a tool to take advantage of teachable moments through the…

  4. Healthy Places for Healthy People

    Science.gov (United States)

    Describes the Healthy Places for Healthy People technical assistance program that helps communities create walkable, healthy, economically vibrant places by engaging with local health care facility partners

  5. In-place HEPA filter penetration test

    International Nuclear Information System (INIS)

    Bergman, W.; Wilson, K.; Elliott, J.; Bettencourt, B.; Slawski, J.W.

    1997-01-01

    We have demonstrated the feasibility of conducting penetration tests on high efficiency particulate air (HEPA) filters as installed in nuclear ventilation systems. The in-place penetration test, which is designed to yield equivalent penetration measurements as the standard DOP efficiency test, is based on measuring the aerosol penetration of the filter installation as a function of particle size using a portable laser particle counter. This in-place penetration test is compared to the current in-place leak test using light scattering photometers for single HEPA filter installations and for HEPA filter plenums using the shroud method. Test results show the in-place penetration test is more sensitive than the in-place leak test, has a similar operating procedure, but takes longer to conduct. Additional tests are required to confirm that the in-place penetration test yields identical results as the standard dioctyl phthalate (DOP) penetration test for HEPA filters with controlled leaks in the filter and gasket and duct by-pass leaks. Further development of the procedure is also required to reduce the test time before the in- place penetration test is practical

  6. In-place HEPA filter penetration test

    Energy Technology Data Exchange (ETDEWEB)

    Bergman, W.; Wilson, K.; Elliott, J. [Lawrence Livermore National Lab., CA (United States)] [and others

    1997-08-01

    We have demonstrated the feasibility of conducting penetration tests on high efficiency particulate air (HEPA) filters as installed in nuclear ventilation systems. The in-place penetration test, which is designed to yield equivalent penetration measurements as the standard DOP efficiency test, is based on measuring the aerosol penetration of the filter installation as a function of particle size using a portable laser particle counter. This in-place penetration test is compared to the current in-place leak test using light scattering photometers for single HEPA filter installations and for HEPA filter plenums using the shroud method. Test results show the in-place penetration test is more sensitive than the in-place leak test, has a similar operating procedure, but takes longer to conduct. Additional tests are required to confirm that the in-place penetration test yields identical results as the standard dioctyl phthalate (DOP) penetration test for HEPA filters with controlled leaks in the filter and gasket and duct by-pass leaks. Further development of the procedure is also required to reduce the test time before the in-place penetration test is practical. 14 refs., 14 figs., 3 tabs.

  7. Strangers in Familiar Places

    DEFF Research Database (Denmark)

    Muhr, Sara Louise

    2012-01-01

    Employees working across multiple cultures are exposed to a vast number of different norms and values, and consequentially work is often a struggle to retain a coherent sense of self. However, when international workers travel, they also encounter more bland spaces where familiarity and similarity...... are important. These spaces appear culturally generic to the Western traveler, but are highly Westernized to bring comfort to Western employees traveling in foreign cultures. This paper argues that these spaces are important in cross-cultural identity work in the sense that international workers – professional...... strangers – need these places to belong and relate to familiarity and to regain a sense of identity. Drawing on an illustrative empirical vignette of an international consultant, I demonstrate how culturally generic spaces can be used in identity work of an international relations consultant....

  8. "Same Room, Safe Place".

    Science.gov (United States)

    Keene Woods, Nikki

    2017-04-01

    There are many different professional stances on safe sleep and then there is the reality of caring for a newborn. There is a debate among professionals regarding safe sleep recommendations. The continum of recommendations vary from the American Academy of Pediatrics (AAP) Safe Sleep Guidelines to the bed-sharing recommendations from the Mother-Baby Behavioral Sleep Laboratory. The lack of consistent and uniform safe sleep recommendations from health professionals has been confusing for families but has more recently raised a real professional ethical dilemma. Despite years of focused safe sleep community education and interventions, sleep-related infant deaths are on the rise in many communities. This commentary calls for a united safe sleep message from all health professionals to improve health for mothers and infants most at-risk, "Same Room, Safe Place."

  9. Pushing Personhood into Place

    DEFF Research Database (Denmark)

    Bidwell, Nicola J.; Winschiers-Theophilus, Heike; Kapuire, Gereon K.

    2011-01-01

    for generations; but technology-use can inadvertently displace knowledge for communities with knowledge traditions that differ from those of technology-design. Devices which are sensitive to users' locations, combined with platforms for social networking and user-generated-content, offer intriguing opportunities...... hope our reflections will inspire others to examine the spatial, temporal and social affordances of technologies within the bonds of rural communities in digitally-sparse 'under-developed' settings....... about personhood, community and place. We adopt a critical attitude towards assumptions about spatial, temporal and social logics and literacies to promote a design sensitivity to local experiences of locations. This motivates us to emphasize connections, not points, and the bodily absorption...

  10. Advanced integrated solvent extraction systems

    Energy Technology Data Exchange (ETDEWEB)

    Horwitz, E.P.; Dietz, M.L.; Leonard, R.A. [Argonne National Lab., IL (United States)

    1997-10-01

    Advanced integrated solvent extraction systems are a series of novel solvent extraction (SX) processes that will remove and recover all of the major radioisotopes from acidic-dissolved sludge or other acidic high-level wastes. The major focus of this effort during the last 2 years has been the development of a combined cesium-strontium extraction/recovery process, the Combined CSEX-SREX Process. The Combined CSEX-SREX Process relies on a mixture of a strontium-selective macrocyclic polyether and a novel cesium-selective extractant based on dibenzo 18-crown-6. The process offers several potential advantages over possible alternatives in a chemical processing scheme for high-level waste treatment. First, if the process is applied as the first step in chemical pretreatment, the radiation level for all subsequent processing steps (e.g., transuranic extraction/recovery, or TRUEX) will be significantly reduced. Thus, less costly shielding would be required. The second advantage of the Combined CSEX-SREX Process is that the recovered Cs-Sr fraction is non-transuranic, and therefore will decay to low-level waste after only a few hundred years. Finally, combining individual processes into a single process will reduce the amount of equipment required to pretreat the waste and therefore reduce the size and cost of the waste processing facility. In an ongoing collaboration with Lockheed Martin Idaho Technology Company (LMITCO), the authors have successfully tested various segments of the Advanced Integrated Solvent Extraction Systems. Eichrom Industries, Inc. (Darien, IL) synthesizes and markets the Sr extractant and can supply the Cs extractant on a limited basis. Plans are under way to perform a test of the Combined CSEX-SREX Process with real waste at LMITCO in the near future.

  11. Linking place and mind

    DEFF Research Database (Denmark)

    Jensen, Marie Møller

    2016-01-01

    the notion of social value into exemplar theory extends the value of this originally cognitive theory to social domains. It is suggested that the association of social value and particular local, linguistic forms may contribute to the salience of these forms among local speakers. The empirical work reported...... here takes the form of a questionnaire study, which aims to uncover Tyneside inhabitants' awareness of forms as well as their affiliation with the local community. Results showed differences in frequency perceptions between participants themselves and others which indicate that speakers can identify...... local forms as such, but that the variety is stigmatized. The strength of local affiliation correlated with participants' own language use and it is suggested that this can be accounted for by employing a social personae explanation, where speakers use certain salient forms to index local belonging...

  12. Rapid inventory taking system

    International Nuclear Information System (INIS)

    Marsden, P.S.S.F.

    1980-01-01

    A data processing system designed to facilitate inventory taking is described. The process depends upon the earliest possible application of computer techniques and the elimination of manual operations. Data is recorded in optical character recognition (OCR) 'A' form and read by a hand held wand reader. Limited validation checks are applied before recording on mini-tape cassettes. 5 refs

  13. Simulating Price-Taking

    Science.gov (United States)

    Engelhardt, Lucas M.

    2015-01-01

    In this article, the author presents a price-takers' market simulation geared toward principles-level students. This simulation demonstrates that price-taking behavior is a natural result of the conditions that create perfect competition. In trials, there is a significant degree of price convergence in just three or four rounds. Students find this…

  14. Take Three: Seasonal Flu

    Centers for Disease Control (CDC) Podcasts

    2010-09-29

    In this podcast, Dr. Joe Bresee describes how to keep from getting seasonal flu and spreading it to others by taking these three steps.  Created: 9/29/2010 by National Center for Immunization and Respiratory Diseases (NCIRD).   Date Released: 9/29/2010.

  15. Taking minutes of meetings

    CERN Document Server

    Gutmann, Joanna

    2016-01-01

    aking Minutes of Meetings guides you through the entire process behind minute taking: arranging the meeting; writing the agenda; creating the optimum environment; structuring the meeting and writing notes up accurately. The minute-taker is one of the most important and powerful people in a meeting and you can use this opportunity to develop your knowledge, broaden your horizons and build credibility within the organization. Taking Minutes of Meetings is an easy to read 'dip-in, dip-out' guide which shows you how to confidently arrange meetings and produce minutes. It provides hands-on advice about the sections of a meeting as well as tips on how to create an agenda, personal preparation, best practice advice on taking notes and how to improve your accuracy. Brand new chapters of this 4th edition include guidance on using technology to maximize effectiveness and practical help with taking minutes for a variety of different types of meetings. The creating success series of books... With over one million copi...

  16. Take action: influence diversity.

    Science.gov (United States)

    Gomez, Norma J

    2013-01-01

    Increased diversity brings strength to nursing and ANNA. Being a more diverse association will require all of us working together. There is an old proverb that says: "one hand cannot cover the sky; it takes many hands." ANNA needs every one of its members to be a part of the diversity initiative.

  17. Theory of polyelectrolytes in solvents.

    Science.gov (United States)

    Chitanvis, Shirish M

    2003-12-01

    Using a continuum description, we account for fluctuations in the ionic solvent surrounding a Gaussian, charged chain and derive an effective short-ranged potential between the charges on the chain. This potential is repulsive at short separations and attractive at longer distances. The chemical potential can be derived from this potential. When the chemical potential is positive, it leads to a meltlike state. For a vanishingly low concentration of segments, this state exhibits scaling behavior for long chains. The Flory exponent characterizing the radius of gyration for long chains is calculated to be approximately 0.63, close to the classical value obtained for second order phase transitions. For short chains, the radius of gyration varies linearly with N, the chain length, and is sensitive to the parameters in the interaction potential. The linear dependence on the chain length N indicates a stiff behavior. The chemical potential associated with this interaction changes sign, when the screening length in the ionic solvent exceeds a critical value. This leads to condensation when the chemical potential is negative. In this state, it is shown using the mean-field approximation that spherical and toroidal condensed shapes can be obtained. The thickness of the toroidal polyelectrolyte is studied as a function of the parameters of the model, such as the ionic screening length. The predictions of this theory should be amenable to experimental verification.

  18. Technical Training - Places available

    CERN Multimedia

    Monique Duval

    2003-01-01

    Places are available in the following courses: HeREF-2003 : Techniques de la réfrigération Hélium :  6 - 10.10.2003  (7 demi-journées, cours en français avec support en anglais)  The Java Programming Language Level 1:  6 - 7.10.2003  (2 days) Java 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 8 - 10.10.2003  (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 :  20 & 22.10.03  (2 jours) AutoCAD 2002 - niveau 1 :  20, 21, 27, 28.10.03  (4 jours) CLEAN-2002 : Working in a Cleanroom: 23.10.03  (half day, free of charge) Plannification de projet avec MS-Project/ Project Scheduling with MS-Project : 2 sessions:  23.10 & 4.11.03  (2 jours/2 days and 18 &25.11.03 langue à définir/language to be defined) AutoCAD 2002 - Level 1:  3, 4, 12, 13.11.03  (4 days) Introduction to Pspice:  4.11.03p.m.  (half-day) AutoCAD 2002 - niveau 2 :  10 & 11.11.03  (2 jours) ACCESS 2000 - niveau 1 :  13 & 14.11.03  (2 jours) A...

  19. Taking of history

    DEFF Research Database (Denmark)

    Langebæk, Rikke

    2007-01-01

    the smartest student. So the more familiar a student can become with these situations the better. Since september 2006, veterinary students at Faculty of Life Sciences, University of Copenhagen, have received training in the discipline of history taking, using innovative educational methods: Online......, the students won’t be intimidated by the situation, as they are already familiar with the ‘client’. The ‘client’/teacher must be able to perform as different types of clients to make the sessions more interesting, colourful and fun. During these Live Role sessions, the students will get help and good advice......Learning how to take a history is an extremely important discipline in the education of veterinary students. In our opinion the fact that this discipline is often neglected in traditional teaching is a big mistake. The mere thought of facing a real client can be almost paralysing to even...

  20. Sample Results From The Extraction, Scrub, And Strip Test For The Blended NGS Solvent

    Energy Technology Data Exchange (ETDEWEB)

    Washington, A. L. II [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Peters, T. B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2014-03-03

    This report summarizes the results of the extraction, scrub, and strip testing for the September 2013 sampling of the Next Generation Solvent (NGS) Blended solvent from the Modular Caustic Side-Solvent Extraction Unit (MCU) Solvent Hold Tank. MCU is in the process of transitioning from the BOBCalixC6 solvent to the NGS Blend solvent. As part of that transition, MCU has intentionally created a blended solvent to be processed using the Salt Batch program. This sample represents the first sample received from that blended solvent. There were two ESS tests performed where NGS blended solvent performance was assessed using either the Tank 21 material utilized in the Salt Batch 7 analyses or a simulant waste material used in the V-5/V-10 contactor testing. This report tabulates the temperature corrected cesium distribution, or DCs values, step recovery percentage, and actual temperatures recorded during the experiment. This report also identifies the sample receipt date, preparation method, and analysis performed in the accumulation of the listed values. The calculated extraction DCs values using the Tank 21H material and simulant are 59.4 and 53.8, respectively. The DCs values for two scrub and three strip processes for the Tank 21 material are 4.58, 2.91, 0.00184, 0.0252, and 0.00575, respectively. The D-values for two scrub and three strip processes for the simulant are 3.47, 2.18, 0.00468, 0.00057, and 0.00572, respectively. These values are similar to previous measurements of Salt Batch 7 feed with lab-prepared blended solvent. These numbers are considered compatible to allow simulant testing to be completed in place of actual waste due to the limited availability of feed material.

  1. Sample Results From The Extraction, Scrub, And Strip Test For The Blended NGS Solvent

    International Nuclear Information System (INIS)

    Washington, A. L. II; Peters, T. B.

    2014-01-01

    This report summarizes the results of the extraction, scrub, and strip testing for the September 2013 sampling of the Next Generation Solvent (NGS) Blended solvent from the Modular Caustic Side-Solvent Extraction Unit (MCU) Solvent Hold Tank. MCU is in the process of transitioning from the BOBCalixC6 solvent to the NGS Blend solvent. As part of that transition, MCU has intentionally created a blended solvent to be processed using the Salt Batch program. This sample represents the first sample received from that blended solvent. There were two ESS tests performed where NGS blended solvent performance was assessed using either the Tank 21 material utilized in the Salt Batch 7 analyses or a simulant waste material used in the V-5/V-10 contactor testing. This report tabulates the temperature corrected cesium distribution, or DCs values, step recovery percentage, and actual temperatures recorded during the experiment. This report also identifies the sample receipt date, preparation method, and analysis performed in the accumulation of the listed values. The calculated extraction DCs values using the Tank 21H material and simulant are 59.4 and 53.8, respectively. The DCs values for two scrub and three strip processes for the Tank 21 material are 4.58, 2.91, 0.00184, 0.0252, and 0.00575, respectively. The D-values for two scrub and three strip processes for the simulant are 3.47, 2.18, 0.00468, 0.00057, and 0.00572, respectively. These values are similar to previous measurements of Salt Batch 7 feed with lab-prepared blended solvent. These numbers are considered compatible to allow simulant testing to be completed in place of actual waste due to the limited availability of feed material

  2. Take the "C" Train

    Science.gov (United States)

    Lawton, Rebecca

    2008-01-01

    In this essay, the author recalls several of her experiences in which she successfully pulled her boats out of river holes by throwing herself to the water as a sea-anchor. She learned this trick from her senior guides at a spring training. Her guides told her, "When you're stuck in a hole, take the "C" train."" "Meaning?" The author asked her…

  3. Social Perspective Taking

    Science.gov (United States)

    2009-09-01

    groups” and engage in less stereotype-driven fear and hostility resulting in reduced impulsive and aggressive behavior (Richardson, Green , & Lago...and the physical world. London: Routledge & Kegan Paul. Batson, C. D. (1991). The altruism question: Towards a social-psychological answer...others. New York: The Guilford Press. Richardson, D. R., Green , L. R., & Lago, T. (1998). The relationship between perspective- taking and

  4. Sustainable development of gree solvent separation process

    OpenAIRE

    Lisickov, Kiril; Fidancevska, Emilija; Grujic, Radoslav; Srebrenkoska, Vineta; Kuvendziev, Stefan

    2011-01-01

    Solvents defi ne a major part of the environmental performance of processes in the chemical industry and impact on cost, safety and health issues. The idea of green solvents expresses the goal to minimize the environmental impact resulting from the use of solvents in chemical production. In spite of conventional separation methods, precise process green technologies are based on the application of modern processes and process equipment as well as control and management...

  5. Supercritical solvent extraction of oil sand bitumen

    Science.gov (United States)

    Imanbayev, Ye. I.; Ongarbayev, Ye. K.; Tileuberdi, Ye.; Mansurov, Z. A.; Golovko, A. K.; Rudyk, S.

    2017-08-01

    The supercritical solvent extraction of bitumen from oil sand studied with organic solvents. The experiments were performed in autoclave reactor at temperature above 255 °C and pressure 29 atm with stirring for 6 h. The reaction resulted in the formation of coke products with mineral part of oil sands. The remaining products separated into SARA fractions. The properties of the obtained products were studied. The supercritical solvent extraction significantly upgraded extracted natural bitumen.

  6. Canyon solvent cleaning with activated alumina

    International Nuclear Information System (INIS)

    Reif, D.J.

    1987-01-01

    This paper presents recent work at SRL concerning the cleaning of solvent extraction solvent used at SRP. The paper explains why we undertook the work, and some laboratory studies on two approaches to solvent cleaning, namely extended carbonate washing and use of solid adsorbents. The paper then discusses scale-up of the preferred method and the results of the full-scale cleaning. 19 figs

  7. Next Generation Solvent - Materials Compatibility With Polymer Components Within Modular Caustic-Side Solvent Extraction Unit (Final Report)

    International Nuclear Information System (INIS)

    Fondeur, F.; Peters, T.; Fink, S.

    2012-01-01

    limited uptake of Isopar(reg s ign) L/Modifier by the polymers probably due to the polymers porosity and rough surfaces. Spectroscopic data on the organic liquid and the polymer surfaces showed no preferential adsorption of any component in the NGS to the polymers and with the exception of CPVC, no leachate was observed in the NGS from any of the polymers studied. The testing shows no major concerns for compatibility over the short duration of these tests but does indicate that longer duration exposure studies are warranted, especially for Tefzel. However, the physical changes experienced by Tefzel in the improved solvent were comparable to the physical changes obtained when Tefzel is placed in CSSX baseline solvent. Therefore, there is no effect of the improved solvent beyond those observed in CSSX baseline solvent.

  8. NEXT GENERATION SOLVENT-MATERIALS COMPATIBILITY WITH POLYMER COMPONENTS WITHIN MODULAR CAUSTIC-SIDE SOLVENT EXTRACTION UNIT (FINAL REPORT)

    Energy Technology Data Exchange (ETDEWEB)

    Fondeur, F.; Peters, T.; Fink, S.

    2012-01-17

    limited uptake of Isopar{reg_sign} L/Modifier by the polymers probably due to the polymers porosity and rough surfaces. Spectroscopic data on the organic liquid and the polymer surfaces showed no preferential adsorption of any component in the NGS to the polymers and with the exception of CPVC, no leachate was observed in the NGS from any of the polymers studied. The testing shows no major concerns for compatibility over the short duration of these tests but does indicate that longer duration exposure studies are warranted, especially for Tefzel. However, the physical changes experienced by Tefzel in the improved solvent were comparable to the physical changes obtained when Tefzel is placed in CSSX baseline solvent. Therefore, there is no effect of the improved solvent beyond those observed in CSSX baseline solvent.

  9. Process for hydrogenating coal and coal solvents

    Energy Technology Data Exchange (ETDEWEB)

    Shridharani, K.G.; Tarrer, A.R.

    1983-02-15

    A novel process is described for the hydrogenation of coal by the hydrogenation of a solvent for the coal in which the hydrogenation of the coal solvent is conducted in the presence of a solvent hydrogenation catalyst of increased activity, wherein the hydrogenation catalyst is produced by reacting ferric oxide with hydrogen sulfide at a temperature range of 260/sup 0/ C to 315/sup 0/ C in an inert atmosphere to produce an iron sulfide hydrogenation catalyst for the solvent. Optimally, the reaction temperature is 275/sup 0/ C. Alternately, the reaction can be conducted in a hydrogen atmosphere at 350/sup 0/ C.

  10. Process for hydrogenating coal and coal solvents

    Science.gov (United States)

    Tarrer, Arthur R.; Shridharani, Ketan G.

    1983-01-01

    A novel process is described for the hydrogenation of coal by the hydrogenation of a solvent for the coal in which the hydrogenation of the coal solvent is conducted in the presence of a solvent hydrogenation catalyst of increased activity, wherein the hydrogenation catalyst is produced by reacting ferric oxide with hydrogen sulfide at a temperature range of 260.degree. C. to 315.degree. C. in an inert atmosphere to produce an iron sulfide hydrogenation catalyst for the solvent. Optimally, the reaction temperature is 275.degree. C. Alternately, the reaction can be conducted in a hydrogen atmosphere at 350.degree. C.

  11. Aminosilicone solvent recovery methods and systems

    Science.gov (United States)

    Spiry, Irina Pavlovna; Perry, Robert James; Wood, Benjamin Rue; Singh, Surinder Prabhjot; Farnum, Rachel Lizabeth; Genovese, Sarah Elizabeth

    2018-02-13

    The present invention is directed to aminosilicone solvent recovery methods and systems. The methods and systems disclosed herein may be used to recover aminosilicone solvent from a carbon dioxide containing vapor stream, for example, a vapor stream that leaves an aminosilicone solvent desorber apparatus. The methods and systems of the invention utilize a first condensation process at a temperature from about 80.degree. C. to about 150.degree. C. and a second condensation process at a temperature from about 5.degree. C. to about 75.degree. C. The first condensation process yields recovered aminosilicone solvent. The second condensation process yields water.

  12. Molecular Thermodynamic Modeling of Mixed Solvent Solubility

    DEFF Research Database (Denmark)

    Ellegaard, Martin Dela; Abildskov, Jens; O’Connell, John P.

    2010-01-01

    A method based on statistical mechanical fluctuation solution theory for composition derivatives of activity coefficients is employed for estimating dilute solubilities of 11 solid pharmaceutical solutes in nearly 70 mixed aqueous and nonaqueous solvent systems. The solvent mixtures range from...... nearly ideal to strongly nonideal. The database covers a temperature range from 293 to 323 K. Comparisons with available data and other existing solubility methods show that the method successfully describes a variety of observed mixed solvent solubility behaviors using solute−solvent parameters from...

  13. Place attachment, place identity and aesthetic appraisal of urban landscape

    Directory of Open Access Journals (Sweden)

    Jaśkiewicz Michał

    2015-12-01

    Full Text Available As the aesthetic of the Polish cities became a topic of wider discussions, it is important to detect the potential role of human-place relations. Two studies (N = 185 & N = 196 were conducted to explore the relationship between place attachment, place identity and appraisal of urban landscape. Satisfaction with urban aesthetic was predicted by two dimensions of place attachment (place inherited and place discovered, local identity (on the trend level and national-conservative identity. Place discovered and European identity were also predictors of visual pollution sensitivity. Place discovered is considered as more active type of attachment that permits both a positive bias concerning the aesthetics of one’s city, and a stronger criticism of the elements that can potentially violate the place’s landscape.

  14. Using Critical Path Analysis (CPA) in Place Marketing process

    OpenAIRE

    Metaxas, Theodore; Deffner, Alex

    2013-01-01

    The article awards the use of CPA as a methodological tool in Place Marketing implementation. Taking into account that Place Marketing is a strategic process based on ‘project’ meaning with particular actions in specific time horizon, the article proposed that CPΑ has the capacity to satisfy this hypothesis. For this reason, the article creates a hypothetical scenario of CPA in four phases, planning, programming, implementation and feedback, taking as a case study the city of Rostock in Germa...

  15. On the theory of electric double layer with explicit account of a polarizable co-solvent

    Energy Technology Data Exchange (ETDEWEB)

    Budkov, Yu. A., E-mail: urabudkov@rambler.ru [Laboratory of NMR Spectroscopy and Numerical Investigations of Liquids, G. A. Krestov Institute of Solution Chemistry of the Russian Academy of Sciences, Ivanovo (Russian Federation); Department of Applied Mathematics, National Research University Higher School of Economics, Moscow (Russian Federation); Kolesnikov, A. L. [Institut für Nichtklassische Chemie e.V., Universität Leipzig, Leipzig (Germany); Kiselev, M. G. [Laboratory of NMR Spectroscopy and Numerical Investigations of Liquids, G. A. Krestov Institute of Solution Chemistry of the Russian Academy of Sciences, Ivanovo (Russian Federation)

    2016-05-14

    We present a continuation of our theoretical research into the influence of co-solvent polarizability on a differential capacitance of the electric double layer. We formulate a modified Poisson-Boltzmann theory, using the formalism of density functional approach on the level of local density approximation taking into account the electrostatic interactions of ions and co-solvent molecules as well as their excluded volume. We derive the modified Poisson-Boltzmann equation, considering the three-component symmetric lattice gas model as a reference system and minimizing the grand thermodynamic potential with respect to the electrostatic potential. We apply present modified Poisson-Boltzmann equation to the electric double layer theory, showing that accounting for the excluded volume of co-solvent molecules and ions slightly changes the main result of our previous simplified theory. Namely, in the case of small co-solvent polarizability with its increase under the enough small surface potentials of electrode, the differential capacitance undergoes the significant growth. Oppositely, when the surface potential exceeds some threshold value (which is slightly smaller than the saturation potential), the increase in the co-solvent polarizability results in a differential capacitance decrease. However, when the co-solvent polarizability exceeds some threshold value, its increase generates a considerable enhancement of the differential capacitance in a wide range of surface potentials. We demonstrate that two qualitatively different behaviors of the differential capacitance are related to the depletion and adsorption of co-solvent molecules at the charged electrode. We show that an additive of the strongly polarizable co-solvent to an electrolyte solution can shift significantly the saturation potential in two qualitatively different manners. Namely, a small additive of strongly polarizable co-solvent results in a shift of saturation potential to higher surface potentials. On

  16. On the theory of electric double layer with explicit account of a polarizable co-solvent

    International Nuclear Information System (INIS)

    Budkov, Yu. A.; Kolesnikov, A. L.; Kiselev, M. G.

    2016-01-01

    We present a continuation of our theoretical research into the influence of co-solvent polarizability on a differential capacitance of the electric double layer. We formulate a modified Poisson-Boltzmann theory, using the formalism of density functional approach on the level of local density approximation taking into account the electrostatic interactions of ions and co-solvent molecules as well as their excluded volume. We derive the modified Poisson-Boltzmann equation, considering the three-component symmetric lattice gas model as a reference system and minimizing the grand thermodynamic potential with respect to the electrostatic potential. We apply present modified Poisson-Boltzmann equation to the electric double layer theory, showing that accounting for the excluded volume of co-solvent molecules and ions slightly changes the main result of our previous simplified theory. Namely, in the case of small co-solvent polarizability with its increase under the enough small surface potentials of electrode, the differential capacitance undergoes the significant growth. Oppositely, when the surface potential exceeds some threshold value (which is slightly smaller than the saturation potential), the increase in the co-solvent polarizability results in a differential capacitance decrease. However, when the co-solvent polarizability exceeds some threshold value, its increase generates a considerable enhancement of the differential capacitance in a wide range of surface potentials. We demonstrate that two qualitatively different behaviors of the differential capacitance are related to the depletion and adsorption of co-solvent molecules at the charged electrode. We show that an additive of the strongly polarizable co-solvent to an electrolyte solution can shift significantly the saturation potential in two qualitatively different manners. Namely, a small additive of strongly polarizable co-solvent results in a shift of saturation potential to higher surface potentials. On

  17. Solvent anode for plutonium purification

    International Nuclear Information System (INIS)

    Bowersox, D.F.; Fife, K.W.; Christensen, D.C.

    1986-01-01

    The purpose of this study is to develop a technique to allow complete oxidation of plutonium from the anode during plutonium electrorefining. This will eliminate the generation of a ''spent'' anode heel which requires further treatment for recovery. Our approach is to employ a solvent metal in the anode to provide a liquid anode pool throughout electrorefining. We use molten salts and metals in ceramic crucibles at 700 0 C. Our goal is to produce plutonium metal at 99.9% purity with oxidation and transfer of more than 98% of the impure plutonium feed metal from the anode into the salt and product phases. We have met these criteria in experiments on the 100 to 1000 g scale. We plan to scale our operations to 4 kg of feed plutonium and to optimize the process parameters

  18. Connecting free energy surfaces in implicit and explicit solvent: an efficient method to compute conformational and solvation free energies.

    Science.gov (United States)

    Deng, Nanjie; Zhang, Bin W; Levy, Ronald M

    2015-06-09

    The ability to accurately model solvent effects on free energy surfaces is important for understanding many biophysical processes including protein folding and misfolding, allosteric transitions, and protein–ligand binding. Although all-atom simulations in explicit solvent can provide an accurate model for biomolecules in solution, explicit solvent simulations are hampered by the slow equilibration on rugged landscapes containing multiple basins separated by barriers. In many cases, implicit solvent models can be used to significantly speed up the conformational sampling; however, implicit solvent simulations do not fully capture the effects of a molecular solvent, and this can lead to loss of accuracy in the estimated free energies. Here we introduce a new approach to compute free energy changes in which the molecular details of explicit solvent simulations are retained while also taking advantage of the speed of the implicit solvent simulations. In this approach, the slow equilibration in explicit solvent, due to the long waiting times before barrier crossing, is avoided by using a thermodynamic cycle which connects the free energy basins in implicit solvent and explicit solvent using a localized decoupling scheme. We test this method by computing conformational free energy differences and solvation free energies of the model system alanine dipeptide in water. The free energy changes between basins in explicit solvent calculated using fully explicit solvent paths agree with the corresponding free energy differences obtained using the implicit/explicit thermodynamic cycle to within 0.3 kcal/mol out of ∼3 kcal/mol at only ∼8% of the computational cost. We note that WHAM methods can be used to further improve the efficiency and accuracy of the implicit/explicit thermodynamic cycle.

  19. Quantitation of buried contamination by use of solvents. [degradation of silicone polymers by amine solvents

    Science.gov (United States)

    Pappas, S. P.; Hsiao, Y. C.; Hill, L. W.

    1973-01-01

    Spore recovery form cured silicone potting compounds using amine solvents to degrade the cured polymers was investigated. A complete list of solvents and a description of the effect of each on two different silicone polymers is provided.

  20. Cleanup of 7.5% tributyl phosphate/n-paraffin solvent-extraction solvent

    International Nuclear Information System (INIS)

    Reif, D.J.

    1987-02-01

    The HM process at the Savannah River Plant uses 7.5% tributyl phosphate in n-paraffin as an extraction solvent. During use, the solvent is altered due to hydrolysis and radiolysis, forming materials which influence product losses, product decontamination, and separation efficiencies. Laboratory studies to improve online solvent cleaning have shown that carbonate washing, although removing residual solvent activity, does not remove binding ligands which hold fission products in the solvent. Treatment of solvent by an alumina adsorption process removes binding ligands and significantly improves recycle solvent performance. Both laboratory work defining a full-scale alumina adsorption process and the use of the process to clean HM process first cycle solvent is discussed

  1. Implicit solvent simulations of DNA and DNA-protein complexes: Agreement with explicit solvent vs experiment

    Czech Academy of Sciences Publication Activity Database

    Chocholoušová, Jana; Feig, M.

    2006-01-01

    Roč. 110, č. 34 (2006), s. 17240-17251 ISSN 1520-6106 Keywords : implicit solvent * explicit solvent * protein DNA complex Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 4.115, year: 2006

  2. Solvent effect on Rb+ to K+ ion mutation: Monte Carlo simulation study

    International Nuclear Information System (INIS)

    Kim, Hag Sung

    2000-01-01

    The solvent effects on the relative free energies of solvation and the difference in partition coefficients (log P) for Rb + to K + mutation in several solvents have been investigated using Monte Carlo simulation (MCS) of statistical perturbation theory (SPT). In comparing the relative free energies for interconversion of one ion pair, Rb + to K + , in H 2 O (TIP4P) in this study with the relative free energies of the computer simulations and the experimental, we found that the figure in this study is -5.00 ± 0.11 kcal/mol. There is good agreement among various studies, taking into account both methods used to obtain the hydration free energies and standard deviations. There is also good agreement between the calculated structural properties of this study and the simulations, ab initio and the experimental results. We have explained the deviation of the relationship between the free energy difference and the Onsager dielectric function of solvents by the electron pair donor properties of the solvents. For the Rb + and K + ion pair, the Onsager dielectric function of solvents (or solvent permittivity), donor number of solvent and the differences in solvation dominate the differences in the relative free energies of solvation and partition coefficients

  3. FT-IR study and solvent-implicit and explicit effect on stepwise tautomerism of Guanylurea: M06-2X as a case of study.

    Science.gov (United States)

    Karimzadeh, Morteza; Manouchehri, Neda; Saberi, Dariush; Niknam, Khodabakhsh

    2018-06-15

    All 66 conformers of guanylurea were optimized and frequency calculations were performed at M06-2X/6-311++G(d,p) level of theory. Theses conformers were categorized into five tautomers, and the most stable conformer of each tautomer were found. Geometrical parameters indicated that these tautomers have almost planar structure. Complete stepwise tautomerism were studied through both intramolecular proton transfer routs and internal rotations. Results indicated that the proton transfer routs involving four-membered heterocyclic structures were rate-determining steps. Also, intramolecular proton movement having six-membered transition state structures had very low energy barrier comparable to the transition states of internal rotation routs. Differentiation of studied tautomers could easily be done through their FT-IR spectra in the range of 3200 to 3900cm -1 by comparing absorption bands and intensity of peaks. Solvent-implicit effects on the stability of tautomers were also studied through re-optimization and frequency calculation in four solvents. Water, DMSO, acetone and toluene had stabilization effect on all considered tautomers, but the order of stabilization effect was as follows: water>DMSO>acetone>toluene. Finally, solvent-explicit, base-explicit and acid-explicit effect were also studied by taking place of studied tautomer nearside of acid, base or solvent and optimization of them. Frequency calculation for proton movement by contribution of explicit effect showed that formic acid had a very strong effect on proton transfer from tautomer A1 to tautomer D8 by lowering the energy barrier from 42.57 to 0.8kcal/mol. In addition, ammonia-explicit effect was found to lower the barrier from 42.57 to 22.46kcal/mol, but this effect is lower than that of water and methanol-explicit effect. Copyright © 2018 Elsevier B.V. All rights reserved.

  4. FT-IR study and solvent-implicit and explicit effect on stepwise tautomerism of Guanylurea: M06-2X as a case of study

    Science.gov (United States)

    Karimzadeh, Morteza; Manouchehri, Neda; Saberi, Dariush; Niknam, Khodabakhsh

    2018-06-01

    All 66 conformers of guanylurea were optimized and frequency calculations were performed at M06-2X/6-311++G(d,p) level of theory. Theses conformers were categorized into five tautomers, and the most stable conformer of each tautomer were found. Geometrical parameters indicated that these tautomers have almost planar structure. Complete stepwise tautomerism were studied through both intramolecular proton transfer routs and internal rotations. Results indicated that the proton transfer routs involving four-membered heterocyclic structures were rate-determining steps. Also, intramolecular proton movement having six-membered transition state structures had very low energy barrier comparable to the transition states of internal rotation routs. Differentiation of studied tautomers could easily be done through their FT-IR spectra in the range of 3200 to 3900 cm-1 by comparing absorption bands and intensity of peaks. Solvent-implicit effects on the stability of tautomers were also studied through re-optimization and frequency calculation in four solvents. Water, DMSO, acetone and toluene had stabilization effect on all considered tautomers, but the order of stabilization effect was as follows: water > DMSO > acetone > toluene. Finally, solvent-explicit, base-explicit and acid-explicit effect were also studied by taking place of studied tautomer nearside of acid, base or solvent and optimization of them. Frequency calculation for proton movement by contribution of explicit effect showed that formic acid had a very strong effect on proton transfer from tautomer A1 to tautomer D8 by lowering the energy barrier from 42.57 to 0.8 kcal/mol. In addition, ammonia-explicit effect was found to lower the barrier from 42.57 to 22.46 kcal/mol, but this effect is lower than that of water and methanol-explicit effect.

  5. Take nothing for granted

    International Nuclear Information System (INIS)

    Turner, R.

    1998-01-01

    An overview of Western Canada Sedimentary Basin (WCSB) natural gas supply, past, present and future, was presented. Reserves are considered as being more than adequate to meet supply requirements. In the long term, it is expected that there will be sufficient gas to fill all existing and currently planned pipelines serving the WCSB. Nevertheless, it does not pay to take anything for granted. One of the challenges facing the natural gas industry in an integrated North American market is to maintain a balance between deliverability and take-away capacity. Competition between fuels is also a factor that complicates matters. Measures taken by TransCanada Pipelines to prepare for the expected heightened competition were reviewed. Chief among them is the recent TransCanada/Nova merger which is expected to increase efficiency, decrease costs, provide a solid platform for continued growth, create customer-driven energy solutions and enable the new entity to successfully compete in an integrated North American market. The accord reached between CAPP, NOVA, SEPAC and TransCanada Pipelines and the status of the new Alberta tolls are further examples of measures taken by TransCanada Pipelines to prepare for all contingencies by leaving nothing to chance

  6. Free Energy, Enthalpy and Entropy from Implicit Solvent End-Point Simulations.

    Science.gov (United States)

    Fogolari, Federico; Corazza, Alessandra; Esposito, Gennaro

    2018-01-01

    Free energy is the key quantity to describe the thermodynamics of biological systems. In this perspective we consider the calculation of free energy, enthalpy and entropy from end-point molecular dynamics simulations. Since the enthalpy may be calculated as the ensemble average over equilibrated simulation snapshots the difficulties related to free energy calculation are ultimately related to the calculation of the entropy of the system and in particular of the solvent entropy. In the last two decades implicit solvent models have been used to circumvent the problem and to take into account solvent entropy implicitly in the solvation terms. More recently outstanding advancement in both implicit solvent models and in entropy calculations are making the goal of free energy estimation from end-point simulations more feasible than ever before. We review briefly the basic theory and discuss the advancements in light of practical applications.

  7. Free Energy, Enthalpy and Entropy from Implicit Solvent End-Point Simulations

    Directory of Open Access Journals (Sweden)

    Federico Fogolari

    2018-02-01

    Full Text Available Free energy is the key quantity to describe the thermodynamics of biological systems. In this perspective we consider the calculation of free energy, enthalpy and entropy from end-point molecular dynamics simulations. Since the enthalpy may be calculated as the ensemble average over equilibrated simulation snapshots the difficulties related to free energy calculation are ultimately related to the calculation of the entropy of the system and in particular of the solvent entropy. In the last two decades implicit solvent models have been used to circumvent the problem and to take into account solvent entropy implicitly in the solvation terms. More recently outstanding advancement in both implicit solvent models and in entropy calculations are making the goal of free energy estimation from end-point simulations more feasible than ever before. We review briefly the basic theory and discuss the advancements in light of practical applications.

  8. Place branding, embeddedness and endogenous rural development : Four European cases

    NARCIS (Netherlands)

    Donner, Mechthild; Horlings, Lummina; Fort, Fatiha; Vellema, Sietze

    2017-01-01

    This article deals with place branding on the regional scale, in the rural context of food and tourism networks in Europe. Place branding is linked to the concepts of endogenous rural development, territory and embeddedness, by analysing how the valorisation of specific rural assets takes shape. The

  9. Place branding, embeddedness and endogenous rural development : Four European cases

    NARCIS (Netherlands)

    Donner, Mechthild; Horlings, Lummina; Fort, Fatiha; Vellema, Sietze

    This article deals with place branding on the regional scale, in the rural context of food and tourism networks in Europe. Place branding is linked to the concepts of endogenous rural development, territory and embeddedness, by analysing how the valorisation of specific rural assets takes shape. The

  10. Sense of place and place identity: review of neuroscientific evidence.

    Science.gov (United States)

    Lengen, Charis; Kistemann, Thomas

    2012-09-01

    The aim of this review is to bring the phenomenological sense of place approach together with current results from neuroscience. We searched in neuroscientific literature for ten dimensions which were beforehand identified to be important in a phenomenological sense of place/place identity model: behaviour, body, emotion, attention, perception, memory, orientation, spirituality, meaning/value and culture/sociality. Neuroscience has identified many neurobiological correlates of phenomenological observations concerning sense of place. The human brain comprises specific and specialised structures and processes to perceive, memorise, link, assess and use spatial information. Specific parts (hippocampus, entorhinal, parahippocampal and parietal cortex), subregions (parahippocampal place area, lingual landmark area), and cells (place cells, grid cells, border cells, head direction cells) have been identified, their specific function could be understood and their interaction traced. Neuroscience has provided evidence that place constitutes a distinct dimension in neuronal processing. This reinforces the phenomenological argumentation of human geography and environmental psychology. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Taking Care of Your Hair

    Science.gov (United States)

    ... Educators Search English Español Taking Care of Your Hair KidsHealth / For Teens / Taking Care of Your Hair ... role in how healthy it looks. Caring for Hair How you take care of your hair depends ...

  12. Introduction to Interregional Place Branding

    DEFF Research Database (Denmark)

    Zenker, Sebastian; Jacobsen, Björn P.

    2015-01-01

    Place branding is an inherently difficult venture, since places are complex systems of geographical abstractions, each one understood in relation and contrast to other geographical entities. Even at the smallest size – a district, town, or city – a place is quite complex, but it becomes even more...

  13. Solvent-vapor-assisted imprint lithography

    NARCIS (Netherlands)

    Voicu, Nicoleta E.; Ludwigs, Sabine; Crossland, Edward J. W.; Andrew, Piers; Steiner, Ullrich

    2007-01-01

    Sub-micrometer features are replicated into high-molecular-weight polymer resists by using solvent-assisted nanoimprint lithography (see figure). By swelling the polymer in a controlled solvent-vapor atmosphere, millibar pressures and ambient temperatures are sufficient to achieve high-fidelity

  14. Into the depths of deep eutectic solvents

    NARCIS (Netherlands)

    Rodriguez, N.; Alves da Rocha, M.A.; Kroon, M.C.

    2015-01-01

    Ionic liquids (ILs) have been successfully tested in a wide range of applications; however, their high price and complicated synthesis make them infeasible for large scale implementation. A decade ago, a new generation of solvents so called deep eutectic solvents (DESs) was reported for the first

  15. Remediation of Contaminated Soils by Solvent Flushing

    NARCIS (Netherlands)

    Augustijn, Dionysius C.M.; Jessup, Ron E.; Rao, P. Suresh C.; Wood, A. Lynn

    1994-01-01

    Solvent flushing is a potential technique for remediating a waste disposal/spill site contaminated with organic chemicals. This technique involves the injection of a solvent mixture (e.g., water plus alcohols) that enhances contaminant solubility, reduces the retardation factor, and increases the

  16. Structuring of polymer solutions upon solvent evaporation

    NARCIS (Netherlands)

    Schaefer, C.; van der Schoot, P.|info:eu-repo/dai/nl/102140618; Michels, J. J.

    2015-01-01

    The morphology of solution-cast, phase-separated polymers becomes finer with increasing solvent evaporation rate. We address this observation theoretically for a model polymer where demixing is induced by steady solvent evaporation. In contrast to what is the case for a classical, thermal quench

  17. Taking action against violence.

    Science.gov (United States)

    Kunz, K

    1996-05-01

    Significant increase in violent crimes in recent years forced Icelandic men to take action against violence. Television was seen as a major contributory factor in increasing violence. Surveys indicate that 10-15 years after television broadcasting commences in a particular society, the incidence of crime can be expected to double. While the majority of the individuals arrested for violent crimes are men, being male does not necessarily mean being violent. The Men's Committee of the Icelandic Equal Rights Council initiated a week-long information and education campaign under the theme "Men Against Violence". This campaign involved several events including an art exhibit, speeches on violence in families, treatment sought by those who are likely to resort to violence, booklet distribution among students in secondary schools, and a mass media campaign to raise public awareness on this pressing problem.

  18. Taking Design Games Seriously

    DEFF Research Database (Denmark)

    Eriksen, Mette Agger; Brandt, Eva; Mattelmäki, Tuuli

    2014-01-01

    Using design games at Participatory Design (PD) events is well acknowledged as a fruitful way of staging participation. As PD researchers, we have many such experiences, and we have argued that design games connect participants and promote equalizing power relations. However, in this paper, we...... will (self) critically re-connect and reflect on how people (humans) and materials (non-humans) continually participate and intertwine in various power relations in design game situations. The analysis is of detailed situated actions with one of our recent games, UrbanTransition. Core concepts mainly from...... Bruno Latour’s work on Actor-Network-Theory are applied. The aim is to take design games seriously by e.g. exploring how assemblages of humans and non-humans are intertwined in tacitly-but-tactically staging participation, and opening up for or hindering negotiations and decision-making, thus starting...

  19. Solvent distillations studies for a reprocessing plant

    International Nuclear Information System (INIS)

    Ginisty, C.; Guillaume, B.

    1989-01-01

    The substantial amounts of solvent used in large reprocessing plants are such that considerable care must be paid to solvent management to limit the production of organic wastes. The installation of intensive treatment by chemical regeneration serves to increase the service life of the solvent. General solvent management, combined with a distillation unit under reduced pressure also helps to recycle the two components of the solvent at a low activity level. Distillation also serves to remove the heavy degradation products that are generally responsible for poor hydraulic behavior and for the holdup of radioactive products such as plutonium, zirconium and ruthenium. From the safety standpoint, the flashpoint of the distilled diluent tends to rise. It can therefore be recycled without risk

  20. Method of decomposing radioactive organic solvent wastes

    International Nuclear Information System (INIS)

    Uki, Kazuo; Ichihashi, Toshio; Hasegawa, Akira; Sato, Tatsuaki

    1986-01-01

    Purpose: To decompose radioactive organic solvent wastes or radioactive hydrocarbon solvents separated therefrom into organic materials under moderate conditions, as well as greatly decrease the amount of secondary wastes generated. Method: Radioactive organic solvent wastes comprising an organic phosphoric acid ester ingredient and a hydrocarbon ingredient as a diluent therefor, or radioactive hydrocarbon solvents separated therefrom are oxidatively decomposed by hydrogen peroxide in an aqueous phosphoric acid solution of phosphoric acid metal salts finally into organic materials to perform decomposing treatment for the radioactive organic solvent wastes. The decomposing reaction is carried out under relatively moderate conditions and cause less burden to facilities or the likes. Further, since the decomposed liquid after the treatment can be reused for the decomposing reaction as a catalyst solution secondary wastes can significantly be decreased. (Yoshihara, H.)

  1. A prototype study with solvent extraction on industrial scale

    International Nuclear Information System (INIS)

    Hernandez, M.E.

    1990-01-01

    The need for uranium purification has generated the study of different methods in order for purification to be achieved, having had excellent results in the laboratory with ionic exchange methods, extraction by means of solvents and chromatography. Pilot experiments of the ionic exchange method have been performed, using as experimentation equipment the columns of ionic exchange, attaining some results without concreting the objectives. Likewise several experiments in mixer-settlers have been performed for the purification of uranium by the solvent extraction method, where there were serious problems with the formation of a third incontrollable phase, and also, due to the later, low purification of the uranium when distributing from one phase to the other. Knowing these problems brought on by the performed experiments in mixer-setters by groups of researchers interested in this part of the nuclear fuel, the task of designing a prototype of extraction with solvents of the mixer-settler type was undertaken in the project 'Models and simulation of equipment and processes of the refinement and conversion department'. The purification of uranium as uranyl nitrate [UO 2 (NO 3 ) 2 ] was developed, establishing the conditions for the equipment operation, concluding that, with some relatively simple adjustements, it is possible to apply in different areas, taking note of the specific needs of mining, cosmetics, perfume and pharmaceutical areas. (Author)

  2. Microfluidic Extraction of Biomarkers using Water as Solvent

    Science.gov (United States)

    Amashukeli, Xenia; Manohara, Harish; Chattopadhyay, Goutam; Mehdi, Imran

    2009-01-01

    A proposed device, denoted a miniature microfluidic biomarker extractor (mu-EX), would extract trace amounts of chemicals of interest from samples, such as soils and rocks. Traditionally, such extractions are performed on a large scale with hazardous organic solvents; each solvent capable of dissolving only those molecules lying within narrow ranges of specific chemical and physical characteristics that notably include volatility, electric charge, and polarity. In contrast, in the mu-EX, extractions could be performed by use of small amounts (typically between 0.1 and 100 L) of water as a universal solvent. As a rule of thumb, in order to enable solvation and extraction of molecules, it is necessary to use solvents that have polarity sufficiently close to the polarity of the target molecules. The mu-EX would make selection of specific organic solvents unnecessary, because mu-EX would exploit a unique property of liquid water: the possibility of tuning its polarity to match the polarity of organic solvents appropriate for extraction of molecules of interest. The change of the permittivity of water would be achieved by exploiting interactions between the translational states of water molecules and an imposed electromagnetic field in the frequency range of 300 to 600 GHz. On a molecular level, these interactions would result in disruption of the three-dimensional hydrogen-bonding network among liquid-water molecules and subsequent solvation and hydrolysis of target molecules. The mu-EX is expected to be an efficient means of hydrolyzing chemical bonds in complex macromolecules as well and, thus, enabling analysis of the building blocks of these complex chemical systems. The mu-EX device would include a microfluidic channel, part of which would lie within a waveguide coupled to an electronically tuned source of broad-band electromagnetic radiation in the frequency range from 300 to 600 GHz (see figure). The part of the microfluidic channel lying in the waveguide would

  3. The chemistry of nonaqueous solvents v.4 solution phenomena and aprotic solvents

    CERN Document Server

    Lagowski, J J

    1976-01-01

    The Chemistry of Nonaqueous Solvents, Volume IV: Solution Phenomena and Aprotic Solvents focuses on the chemistry of nonaqueous solvents, with emphasis on solution phenomena and aprotic solvents such as tetramethylurea, inorganic acid chlorides, cyclic carbonates, and sulfolane. This book is organized into seven chapters and begins with an overview of the theory of electrical conductivity and elementary experimental considerations, along with some of the interesting research on nonaqueous solvents. It then turns to a discussion on hydrogen bonding phenomena in nonaqueous systems as probed

  4. PARIS II: Computer Aided Solvent Design for Pollution Prevention

    Science.gov (United States)

    This product is a summary of U.S. EPA researchers' work developing the solvent substitution software tool PARIS II (Program for Assisting the Replacement of Industrial Solvents, version 2.0). PARIS II finds less toxic solvents or solvent mixtures to replace more toxic solvents co...

  5. No place for their children:

    DEFF Research Database (Denmark)

    Nielsen, Helene Pristed

    2018-01-01

    Drawing on a combination of theories on gender and place and work after globalisation, this article addresses how gender, place, employment-related mobility and flexible work conditions affect generational ties to place. Interviews with persons whose working life histories (by choice or circumsta......Drawing on a combination of theories on gender and place and work after globalisation, this article addresses how gender, place, employment-related mobility and flexible work conditions affect generational ties to place. Interviews with persons whose working life histories (by choice...... or circumstance) include flexible hours and high levels of mobility reveal explicit hopes that their children will have more stable working lives – and expectations that this will mean that they shall have to leave the local area. The article documents how the local place is an important component...

  6. The Safe and Efficient Evaporation of a Solvent from Solution

    Science.gov (United States)

    Mahon, Andrew R.

    1997-02-01

    The process of evaporating a solvent from a solution can cause problems for many students. By using a water-vacuum aspirator, backflashes of water can flood the sample tube and be detrimental to the experiment. This type of apparatus can also cause problems by drawing the solution it is evaporating back into the vacuum hose, causing the student to lose part or all of the products of their experiment. Macroscale and Microscale Organic Experiments, 2nd edition (1), suggested two techniques to dissolve solvents from a mixture. It suggested blowing a stream of air over the solution from a Pasteur pipet, or attaching a Pasteur pipet to an aspirator and drawing air over the surface of the liquid. Again, the danger of blowing air over the solution leaves the risk of splattering the solution, and drawing air over the surface of the liquid as described further endangers the products of the experiment through the risk of sucking the products up into the pipet aspirator. In an effort to eliminate these problems, a new technique has been developed. By inverting an ordinary 200-mL vacuum flask and pulling a steady current of air from the vacuum apparatus through it, any type of small container can be placed under it, allowing the solvent to be evaporated in a steady, mistake-free manner . By evaporating the solvent from the container that the products will be submitted in, no sample is lost through the process of transferring it from a vacuum flask or beaker to the final container.

  7. Distribution of multi-component solvents in solvent vapor extraction chamber

    Energy Technology Data Exchange (ETDEWEB)

    Das, S. [Society of Petroleum Engineers, Richardson, TX (United States)]|[Marathon Oil Corp., Houston, TX (United States)

    2008-10-15

    Vapex process performance is sensitive to operating pressures, temperatures and the types of solvent used. The hydrocarbon solvents used in Vapex processes typically have between 5 and 10 per cent hydrocarbon impurities, and the accumulation of dense phases inside the vapor chamber reduces gravity drainage potential. This study investigated the partitioning of solvent compounds inside the vapor chamber during in situ Vapex processes.The aim of the study was to examine how the different components of the mixed solvent partitioned inside the extracted chamber during the oil and vapor phase. A 2-D homogenous reservoir model was used to simulate the Vapex process with a solvent mixture comprised of propane and methane at various percentages. The effect of injecting a hot solvent vapor was also investigated. The study showed that injected methane accumulated at both the top and the extraction interface. Accumulations near the top had a positive impact on solvent confinement in thin reservoirs. Diffusion of the solvent component was controlled by gas phase molecular diffusion, and was much faster than the diffusion of solvent molecules in the liquid phase. The use of hot solvent mixtures slowed the extraction process due to lower solvent solubility in the oil phase. It was concluded that the negative impact on viscosity reduction by dilution was not compensated by rises in temperature. 6 refs., 11 figs.

  8. Reframing place promotion, place marketing, and place branding - moving beyond conceptual confusion

    NARCIS (Netherlands)

    Boisen, Martin; Terlouw, Kees; Groote, Peter; Couwenberg, Oscar

    2017-01-01

    The literature and practice of place promotion, place marketing and place branding lack a common understanding of what these three concepts mean and through what kind of policies they can be implemented. Although scholars have provided several theoretical frameworks and definitions, both scholars

  9. Medicaid: taking stock.

    Science.gov (United States)

    Davidson, S M

    1993-01-01

    In the last few years, Medicaid has attracted more than casual attention, one reflection of which is the fact that JHPPL has published five papers on the program in its last few issues. This paper, a sixth, takes a broader view of the program than is typically the case. After a critique of the five recent articles, I discuss several questions raised by them and reach the following conclusions: First, the states do not invest enough in producing program data suitable for policy analysis and research. One lesson: Better data and analysis can help the states to avoid expensive mistakes. Second, those policy analyses that have been offered fail to give sufficient attention to the political dimension of policy. That is one reason why policy choices produce unexpected effects. Third, since Medicaid is a relatively small player in the vast medical care market, incentives adopted by Medicaid officials throughout the country rarely have the desired effects. Finally, as long as Medicaid remains the principal mechanism to provide access to health care for the poor, it must be made as efficient and effective as possible. Yet, for both political and economic reasons, Medicaid can never be what its original planners had hoped, the vehicle for providing the poor with reliable access to mainstream medical care.

  10. Taking the plunge

    CERN Multimedia

    2008-01-01

    On 8 and 15 October, 58 people took the plunge and headed to the Varembé swimming pool in Geneva for their first taste of scuba diving at one of the CERN scuba club’s free trial dives. Club president Alberto Pace, left, taking a new recruit on his first dive. The CERN scuba club was making waves down at the Varembe swimming pool on Wednesday 15 October. Thirty-six people turned up to the club’s second free trial dive. "It was fantastic," said Jörg, one of the new recruits, after his first ever dive. "I’ve always wanted to try diving and this was a free lesson, so I thought I would come and have a go." Fourteen of the club’s fully qualified instructors were there to give one-on-one tuition. After a first dive in the normal pool the new divers moved into the deep pool. Some took to the water like fish, and at one point an impromptu game of aqua-Frisbee broke out, five metres below the surface. Richard Catherall, who organi...

  11. Sample-taking apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Tanov, Y I; Ismailov, R A; Orazov, A

    1980-10-07

    The invention refers to the equipment for testing water-bearing levels in loose rocks. Its purpose is to simultaneously remove with the rock sample a separate fluid sample from the assigned interval. The sample-taking apparatus contains a core lifter which can be submerged into the casting string with housing and front endpiece in the form of a rod with a piston which covers the cavity of the core lifter, as well as mechanism for fixing and moving the endpiece within the core lifter cavity. The device differs from the known similar devices because the upper part of the housing of the core lifter is equipped with a filter and mobile casting which covers the filter. In this case the casing is connected to the endpiece rod and the endpiece is installed with the possibility of movement which is limited with fixing in the upper position and in the extreme upper position it divides the core lifter cavity into two parts, filter settling tank and core-receiving cavity.

  12. Decision taking as a service

    NARCIS (Netherlands)

    Bergstra, J.A.

    2012-01-01

    Decision taking can be performed as a service to other parties and it is amenable to outtasking rather than to outsourcing. Outtasking decision taking is compatible with selfsourcing of decision making activities carried out in preparation of decision taking. Decision taking as a service (DTaaS) is

  13. Sedimentation behaviour and colloidal properties of porous, chemically modified silicas in non-aqueous solvents

    NARCIS (Netherlands)

    Vissers, J.P.C.; Laven, J.; Claessens, H.A.; Cramers, C.A.M.G.; Agterof, W.G.M.

    1997-01-01

    The sedimentation behaviour and colloidal properties of porous, chemically modified silicas dispersed in non-aqueous solvents have been studied. The free settling behaviour of non-aggregated silica suspensions could effectively be described with a modified Stokes equation that takes into account the

  14. Organic Solvent Tolerant Lipases and Applications

    Directory of Open Access Journals (Sweden)

    Shivika Sharma

    2014-01-01

    Full Text Available Lipases are a group of enzymes naturally endowed with the property of performing reactions in aqueous as well as organic solvents. The esterification reactions using lipase(s could be performed in water-restricted organic media as organic solvent(s not only improve(s the solubility of substrate and reactant in reaction mixture but also permit(s the reaction in the reverse direction, and often it is easy to recover the product in organic phase in two-phase equilibrium systems. The use of organic solvent tolerant lipase in organic media has exhibited many advantages: increased activity and stability, regiospecificity and stereoselectivity, higher solubility of substrate, ease of products recovery, and ability to shift the reaction equilibrium toward synthetic direction. Therefore the search for organic solvent tolerant enzymes has been an extensive area of research. A variety of fatty acid esters are now being produced commercially using immobilized lipase in nonaqueous solvents. This review describes the organic tolerance and industrial application of lipases. The main emphasis is to study the nature of organic solvent tolerant lipases. Also, the potential industrial applications that make lipases the biocatalysts of choice for the present and future have been presented.

  15. Adjusting to New Places: International Student Adjustment and Place Attachment

    Science.gov (United States)

    Terrazas-Carrillo, Elizabeth C.; Hong, Ji Y.; Pace, Terry M.

    2014-01-01

    Using data obtained from in-depth semistructured interviews, we examined international students' attachments to place in the local American Midwestern community where they have attended college for at least 2 years. The results of this study suggest that participants engage in a process of renegotiation of meanings attached to new places in ways…

  16. Census 2000 Places (cen00pl02)

    Data.gov (United States)

    California Natural Resource Agency — Census 2000 Place Names provides a seamless statewide GIS layer of places, including census designated places (CDP), consolidated cities, and incorporated places,...

  17. Solvent Handbook Database System user's manual

    International Nuclear Information System (INIS)

    1993-03-01

    Industrial solvents and cleaners are used in maintenance facilities to remove wax, grease, oil, carbon, machining fluids, solder fluxes, mold release, and various other contaminants from parts, and to prepare the surface of various metals. However, because of growing environmental and worker-safety concerns, government regulations have already excluded the use of some chemicals and have restricted the use of halogenated hydrocarbons because they affect the ozone layer and may cause cancer. The Solvent Handbook Database System lets you view information on solvents and cleaners, including test results on cleaning performance, air emissions, recycling and recovery, corrosion, and non-metals compatibility. Company and product safety information is also available

  18. Modeling of Salt Solubilities in Mixed Solvents

    DEFF Research Database (Denmark)

    Chiavone-Filho, O.; Rasmussen, Peter

    2000-01-01

    A method to correlate and predict salt solubilities in mixed solvents using a UNIQUAC+Debye-Huckel model is developed. The UNIQUAC equation is applied in a form with temperature-dependent parameters. The Debye-Huckel model is extended to mixed solvents by properly evaluating the dielectric...... constants and the liquid densities of the solvent media. To normalize the activity coefficients, the symmetric convention is adopted. Thermochemical properties of the salt are used to estimate the solubility product. It is shown that the proposed procedure can describe with good accuracy a series of salt...

  19. Solvent extraction in the nuclear fuel cycle

    International Nuclear Information System (INIS)

    Eccles, H.; Naylor, A.

    1987-01-01

    Solvent extraction techniques have been used in the uranium nuclear fuel cycle in three main areas; concentration of uranium from ore leach liquor, purification of ore concentrates and fuel reprocessing. Solvent extraction has been extended to the removal of transuranic elements from active waste liquor, the recovery of uranium from natural sources and the recovery of noble metals from active waste liquor. Schemes are presented for solvent extraction of uranium using the Amex or Dapex process; spent fuel reprocessing and the Purex process. Recent and future developments of the techniques are outlined. (UK)

  20. Chemical reactions in solvents and melts

    CERN Document Server

    Charlot, G

    1969-01-01

    Chemical Reactions in Solvents and Melts discusses the use of organic and inorganic compounds as well as of melts as solvents. This book examines the applications in organic and inorganic chemistry as well as in electrochemistry. Organized into two parts encompassing 15 chapters, this book begins with an overview of the general properties and the different types of reactions, including acid-base reactions, complex formation reactions, and oxidation-reduction reactions. This text then describes the properties of inert and active solvents. Other chapters consider the proton transfer reactions in

  1. Spreadsheet algorithm for stagewise solvent extraction

    International Nuclear Information System (INIS)

    Leonard, R.A.; Regalbuto, M.C.

    1994-01-01

    The material balance and equilibrium equations for solvent extraction processes have been combined with computer spreadsheets in a new way so that models for very complex multicomponent multistage operations can be setup and used easily. A part of the novelty is the way in which the problem is organized in the spreadsheet. In addition, to facilitate spreadsheet setup, a new calculational procedure has been developed. The resulting Spreadsheet Algorithm for Stagewise Solvent Extraction (SASSE) can be used with either IBM or Macintosh personal computers as a simple yet powerful tool for analyzing solvent extraction flowsheets. 22 refs., 4 figs., 2 tabs

  2. TRUEX process solvent cleanup with solid sorbents

    International Nuclear Information System (INIS)

    Tse, Pui-Kwan; Reichley-Yinger, L.; Vandegrift, G.F.

    1989-01-01

    Solid sorbents, alumina, silica gel, and Amberlyst A-26 have been tested for the cleanup of degraded TRUEX-NPH solvent. A sodium carbonate scrub alone does not completely remove acidic degradation products from highly degraded solvent and cannot restore the stripping performance of the solvent. By following the carbonate scrub with either neutral alumina or Amberlyst A-26 anion exchange resin, the performance of the TRUEX-NPH is substantially restored. The degraded TRUEX-NPH was characterized before and after treatment by supercritical fluid chromatography. Its performance was evaluated by americium distribution ratios, phase-separation times, and lauric acid distribution coefficients. 17 refs., 2 figs., 5 tabs

  3. Uranium refining by solvent extraction

    International Nuclear Information System (INIS)

    Kraikaew, J.; Srinuttrakul, W.

    2014-01-01

    The solvent extraction process to produce higher purity uranium from yellowcake was studied in laboratory scale. Yellowcake, which the uranium purity is around 70% and the main impurity is thorium, was obtained from monazite processing pilot plant of Rare Earth Research and Development Center in Thailand. For uranium re-extraction process, the extractant chosen was Tributylphosphate (TBP) in kerosene. It was found that the optimum concentration of TBP was 10% in kerosene and the optimum nitric acid concentration in uranyl nitrate feed solution was 4 N. An increase in concentrations of uranium and thorium in feed solution resulted in a decrease in the distribution of both components in the extractant. However, the distribution of uranium into the extractant was found to be more than that of thorium. The equilibration study of the extraction system, UO_2(NO_3)/4N HNO_3 – 10%TBP/Kerosene, was also investigated. Two extraction stages were calculated graphically from 100,000 ppm uranium concentration in feed solution input with 90% extraction efficiency and the flow ratio of aqueous phase to organic phase was adjusted to 1.0. For thorium impurity scrubbing process, 10% TBP in kerosene was loaded with uranium and minor thorium from uranyl nitrate solution prepared from yellowcake and was scrubbed with different low concentration nitric acid. The results showed that at nitric acid normality was lower than 1 N, uranium distributed well to aqueous phase. As conclusion, optimum nitric acid concentration for scrubbing process should not less than 1 N and diluted nitric acid or de-ionized water should be applied to strip uranium from organic phase in the final refining process. (author)

  4. Sacred places in global big cities

    DEFF Research Database (Denmark)

    Greve, Anni

    the relation between the sacred and the profane, and about the role of the sacred in modern societies. The question is if the development of modern societies has implied the gradual abolishment of religious beliefs, rituals and rites, or has it on the contrary implied the installment of new forms of religious...... beliefs and sacred places, which are cultivated through regular rituals and rites, just as some traditional societies have cultivated for instance totemism. This paper will take its point of departure in Durkheim’s study of The Elementary Forms of Religious Life from 1912. Then it will turn......The question of sacred places in modern societies involves an analytical perspective, which is not very prevalent in sociology, namely the anthropological or even better: the ethnological perspective. With this theme we have entered a veritable dispute, or controversy, in sociology about...

  5. Analysis of 99Tc in the radioactive liquid waste after extraction into suitable solvent

    International Nuclear Information System (INIS)

    Sonar, N.L.; Vaishali De; Pardeshi, V.; Raghvendra, Y.; Valsala, T.P.; Sonavane, M.S.; Kulkarni, Y.; Raj Kanwar

    2012-01-01

    99 Tc is one of the long lived fission product with high fission yield. >From radioactive waste management point of view it is very much essential to evaluate the concentration of technetium in the radioactive liquid waste in order to finalise the treatment process to extract/isolate it from the stream which is discharged to the environment. For the estimation of 99 Tc in the radioactive liquid waste stream, extraction of the stable complex of technetium-tetraphenyl arsonium chloride (TPAC) into chloroform followed by beta counting was studied. Various parameters like pH, time of equilibration, concentration of TPAC in chloroform, use of other solvent for extraction as well as interference of various other radionuclides present in the waste were also studied. The radioactive liquid waste being handled in plant contains high concentrations of salts in the form of sodium nitrate. Hence effect of salt concentration on the percentage extraction was also evaluated. The extraction behavior does not dependent on change in the pH of the solution. Almost 99.5% extraction was observed in the pH range of 1-13.0. High concentration of salt is affecting the extraction. However, this can be taken care by diluting the radioactive waste. It takes almost 90 min time for maximum extraction. Presence of radionuclides like 137 Cs, 90 Sr are not interfering the extraction of 99 Tc. However, 106 Ru is getting slightly extracted along with 99 Tc. The error due to 106 Ru can be eliminated by taking gamma spectrum and deducting the activity from the total beta activity to get 99 Tc activity. Nitrobenzene can be used for extraction of Tc-TPAC complex in place of chloroform. (author)

  6. Enacting a Place-Responsive Research Methodology: Walking Interviews with Educators

    Science.gov (United States)

    Lynch, Jonathan; Mannion, Greg

    2016-01-01

    Place-based and place-responsive approaches to outdoor learning and education are developing in many countries but there is dearth of theoretically-supported methodologies to take a more explicit account of place in research in these areas. In response, this article outlines one theoretical framing for place-responsive methodologies for…

  7. Conceptual study of hydrogen donor solvent in the NEDOL coal liquefaction process

    Energy Technology Data Exchange (ETDEWEB)

    Kouzu, M.; Onozaki, M.; Oi, S. [Mitsui SRC Co Ltd, Tokyo (Japan)

    2002-03-01

    A 150 ton/day coal liquefaction pilot plant (PP) of the NEDOL process, supported by New Energy and Industrial Technology Development Organization (NEDO), was operated successfully for a total of 269 days at Kashima, Japan. With a great number of data obtained through the operation, the design procedure for the NEDOL process was studied. Middle and heavy oils from the coal employed were recycled as a hydrogen-donor solvent after hydrotreatment over Ni Mo/gamma-Al2O{sub 3} in a trickle bed reactor. The hydrogen donating ability of the solvent was high enough to obtain higher oil yield (50-58 wt%) at the aromaticity of ca. 0.45. Life expectancy of solvent hydrotreatment catalyst, requisite to the hydrotreater design, was estimated under PP operating conditions. In addition, physical properties of the solvent required for process design were determined, and hydrodynamics in the liquefaction bubble column reactors were examined. Taking the obtained hydrodynamics and thermal behavior into consideration, a design procedure of the liquefaction bubble column reactors was establsihed using a process simulator (CARD) validated by the product yields of PP. The simulation including distillation and solvent hydrotreatment showed that the content of heavy oil fraction (b.p. 350 - 538{degree} C) in the solvent was a determinant factor in the design of a large scale plant based on the NEDOL process.

  8. Organic solvents from sugar cane molasses

    Energy Technology Data Exchange (ETDEWEB)

    Oeser, H

    1970-01-01

    The production of organic solvents by fermentation of low priced cane molasses is discussed. Processes described and illustrated in detail include the production of acetone, butanol, ethanol, acetic acid, ethyl acetate and butyl acetate.

  9. Solvent induced supramolecular anisotropy in molecular gels

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, Michael A., E-mail: mroger09@uoguelph.ca [Department of Food Science, University of Guelph, Guelph, Ontario, N3C3X9 (Canada); Corradini, Maria G. [Department of Food Science, University of Massachusetts Amherst, Amherst, MA, 01003 (United States); Emge, Thomas [Department of Chemistry and Biochemistry, Rutgers University, New Brunswick, NJ, 08901 (United States)

    2017-06-15

    Herein is the first report of solvent induced anisotropy in 12-hydroxystearic acid self-assembled fibrillar networks. Increasing the chain length of polar solvent, such as nitriles and ketones, tailored the anisotropy of the fibrillar aggregates. 12HSA molecular gels, comprised of alkanes, exhibited an isotropic fibrillar network irrespective of the alkane chain length. In polar solvents, anisotropy, observed using 2D powder x-ray diffraction profiles, is correlated to a fibrillar supramolecular morphologies in long chain nitriles and ketones while sphereulitic crystals are correlated to x-ray diffraction patterns with an isotropic scatter intensity in short chain ketones and nitriles. These changes directly modify the final physical properties of the gels. - Highlights: • 12-HSA self-assembles into crystalline supramolecular morphologies depending on the solvent. • Alkanes, short chain nitriles and ketones led to 12-HSA displaying supramolecular isotropy. • In long chain nitriles and ketones, 12-HSA displays supramolecular anisotropy.

  10. Solvent induced supramolecular anisotropy in molecular gels

    International Nuclear Information System (INIS)

    Rogers, Michael A.; Corradini, Maria G.; Emge, Thomas

    2017-01-01

    Herein is the first report of solvent induced anisotropy in 12-hydroxystearic acid self-assembled fibrillar networks. Increasing the chain length of polar solvent, such as nitriles and ketones, tailored the anisotropy of the fibrillar aggregates. 12HSA molecular gels, comprised of alkanes, exhibited an isotropic fibrillar network irrespective of the alkane chain length. In polar solvents, anisotropy, observed using 2D powder x-ray diffraction profiles, is correlated to a fibrillar supramolecular morphologies in long chain nitriles and ketones while sphereulitic crystals are correlated to x-ray diffraction patterns with an isotropic scatter intensity in short chain ketones and nitriles. These changes directly modify the final physical properties of the gels. - Highlights: • 12-HSA self-assembles into crystalline supramolecular morphologies depending on the solvent. • Alkanes, short chain nitriles and ketones led to 12-HSA displaying supramolecular isotropy. • In long chain nitriles and ketones, 12-HSA displays supramolecular anisotropy.

  11. Full scale solvent extraction remedial results

    International Nuclear Information System (INIS)

    Cash, A.B.

    1992-01-01

    Sevenson Extraction Technology, Inc. has completed the development of the Soil Restoration Unit (initially developed by Terra-Kleen Corporation), a mobile, totally enclosed solvent extraction treatment facility for the removal of organic contaminated media is greater by a closed loop, counter current process that recycles all solvents. The solvents used are selected for the individual site dependant upon the contaminants, such as PCB's, oil, etc. and the soil conditions. A mixture of up to fourteen non-toxic solvents can be used for complicated sites. The full scale unit has been used to treat one superfund site, the Traband Site in Tulsa, Oklahoma, and is currently treating another superfund site, the Pinette's Salvage Yard Site in Washburn, Maine. The full scale Soil Restoration Unit has also been used at a non-superfund site, as part of a TSCA Research and Development permit. The results from these sites will be discussed in brief herein, and in more detail in the full paper

  12. Enantioselective solvent-free Robinson annulation reactions

    Indian Academy of Sciences (India)

    Unknown

    solvents to effect an asymmetric synthesis is an important step forward towards ... In continuation of our preliminary communication 2, we wish to ..... formation of chiral enamine 74 from the reaction of S-proline with pro-R carbonyl group.

  13. STUDIES ON SOLVENT EXTRACTION OF FREE HYDROGEN ...

    African Journals Online (AJOL)

    synthesized through glucose degradation (glycolysis) to lactic acid. ... g sample into a well stoppered plastic bottle and mixed with 20 mL of distilled .... Recovery of used solvent is necessary because methylchloroform is toxic to the bacteria.

  14. Green and Bio-Based Solvents.

    Science.gov (United States)

    Calvo-Flores, Francisco G; Monteagudo-Arrebola, María José; Dobado, José A; Isac-García, Joaquín

    2018-04-24

    Chemical reactions and many of the procedures of separation and purification employed in industry, research or chemistry teaching utilize solvents massively. In the last decades, with the birth of Green Chemistry, concerns about the employment of solvents and the effects on human health, as well as its environmental impacts and its dependence on non-renewable raw materials for manufacturing most of them, has drawn the attention of the scientific community. In this work, we review the concept of green solvent and the properties and characteristics to be considered green. Additionally, we discuss the different possible routes to prepare many solvents from biomass, as an alternative way to those methods currently applied in the petrochemical industry.

  15. Activity coefficients of solutes in binary solvents

    International Nuclear Information System (INIS)

    Gokcen, N.A.

    1982-01-01

    The activity coefficients in dilute ternary systems are discussed in detail by using the Margules equations. Analyses of some relevant data at high temperatures show that the sparingly dissolved solutes in binary solvents follow complex behavior even when the binary solvents are very nearly ideal. It is shown that the activity data on the solute or the binary system cannot permit computation of the remaining activities except for the regular solutions. It is also shown that a fourth-order equation is usually adequate in expressing the activity coefficient of a solute in binary solvents at high temperatures. When the activity data for a binary solvent are difficult to obtain in a certain range of composition, the activity data for a sparingly dissolved solute can be used to supplement determination of the binary activities

  16. Place prioritization for biodiversity content

    Indian Academy of Sciences (India)

    The prioritization of places on the basis of biodiversity content is part of any systematic biodiversity conservation planning process. The place prioritization procedure implemented in the ResNet software package is described. This procedure is primarily based on the principles of rarity and complementarity. Application of the ...

  17. Mapping and measuring place attachment

    DEFF Research Database (Denmark)

    Brown, Greg; Raymond, Christopher Mark; Corcoran, Jonathan

    2015-01-01

    The concept of place attachment has been studied extensively across multiple disciplines but only recently with empirical measurement using public participation GIS (PPGIS) and related crowd-sourcing mapping methods. This research trialed a spatially explicit method for identifying place attachme...

  18. Place leadership, governance and power

    Directory of Open Access Journals (Sweden)

    Sotarauta Markku

    2016-12-01

    Full Text Available There is an emerging consensus that place leadership is the missing piece in the local and regional development puzzle. In this context, leadership is a hidden form of agency, shadowed by such visible forms of influence as structures and formal institutions, as well as development programs and plans. This article argues that one of the most central issues in a study of place leadership is to analyse the relationships between governance, power and place leadership. The governance arrangements are undoubtedly important, as they dictate the kind of resources and positions provided to regional development work, and thus they also enable, as well as constrain, the many efforts of regional champions to exercise power in complex development processes. It is argued here that revealing how place leadership is enacted in different places and times would allow us to flesh out novel aspects about the eternal questions of how and why some places are able to adapt strategically to ever-changing social, economic and environmental circumstances while others fail to do so. Additionally, deeper investigations of place leadership would hopefully allow us to provide policymakers and practitioners with added insight on the ways to make regional development policies and practices not only more strategic but also effective. This paper elaborates the conceptual link between place leadership, governance and power.

  19. An overview of industrial solvent use or is there life after chlorinated solvents?

    International Nuclear Information System (INIS)

    Green, B.

    1991-01-01

    Everyone using industrial chemicals has been affected by the fire- storm of new regulations governing solvent use. How will companies currently using hazardous solvents prepare for the changes ahead? What will the impact be on commonly used industrial solvents? What effect are environmental pressures having on solvent use and disposal? Are the responsible individuals in your company up-to-date on phase-out schedules? This paper is written for an audience of compliance coordinators, consultants, production engineers and corporate management. In it, the either addresses the above questions and discusses the specific products affected. The author reviews currently available alternatives to chlorinated and hazardous solvents and introduces a simple system for rating alternatives. The program also includes a discussion of solvent minimization programs and worker reeducation

  20. Occupational exposure to solvents and bladder cancer

    DEFF Research Database (Denmark)

    Hadkhale, Kishor; Martinsen, Jan Ivar; Weiderpass, Elisabete

    2017-01-01

    logistic regression model was used to estimate hazard ratios (HR) and their 95% confidence intervals (95% CI). Increased risks were observed for trichloroethylene (HR 1.23, 95% 95% CI 1.12-1.40), toluene (HR 1.20, 95% CI 1.00-1.38), benzene (HR 1.16, 95% CI 1.04-1.31), aromatic hydrocarbon solvents (HR 1...... of occupational exposure to trichloroethylene, perchloroethylene, aromatic hydrocarbon solvents, benzene and toluene and the risk of bladder cancer....

  1. Computer-Aided Solvent Screening for Biocatalysis

    DEFF Research Database (Denmark)

    Abildskov, Jens; Leeuwen, M.B. van; Boeriu, C.G.

    2013-01-01

    constrained properties related to chemical reaction equilibrium, substrate and product solubility, water solubility, boiling points, toxicity and others. Two examples are provided, covering the screening of solvents for lipase-catalyzed transesterification of octanol and inulin with vinyl laurate....... Esterification of acrylic acid with octanol is also addressed. Solvents are screened and candidates identified, confirming existing experimental results. Although the examples involve lipases, the method is quite general, so there seems to be no preclusion against application to other biocatalysts....

  2. Solvent management in a reprocessing plant

    International Nuclear Information System (INIS)

    Guillaume, B.; Germain, M.; Puyou, M.; Rouyer, H.

    1987-01-01

    Solvent management in large capacity reprocessing plant is studied to limit production of organic wastes. Chemical processing increases life time of solvent. Low pressure distillation allows the recycling of TBP and diluent at a low activity level. Besides heavy degradation products are eliminated. For the safety the flash point of distillated diluent increases slightly. Tests on an industrial scale started in 1985 and since more than 500 cubic meters were treated [fr

  3. Hazardous Solvent Substitution Data System reference manual

    International Nuclear Information System (INIS)

    Branham-Haar, K.A.; Twitchell, K.E.

    1993-07-01

    Concern for the environment, in addition to Federal regulation, mandate the replacement of hazardous solvents with safer cleaning agents. Manufacturers are working to produce these replacement solvents. As these products are developed, potential users need to be informed of their availability. To promote the use of these new products instead of traditional solvents, the Idaho National Engineering Laboratory (INEL) has developed the Hazardous Solvent Substitution Data System (HSSDS). The HSSDS provides a comprehensive system of information on alternatives to hazardous solvents and related subjects, and it makes that information available to solvent users, industrial hygienists, and process engineers. The HSSDS uses TOPIC reg-sign, a text retrieval system produced by Verity, Inc., to allow a user to search for information on a particular subject. TOPIC reg-sign produces a listing of the retrieved documents and allows the use to examine the documents individually and to use the information contained in them. This reference manual does not replace the comprehensive TOPIC reg-sign user documentation (available from Verity, Inc.), or the HSSDS Tutorial (available from the INEL). The purpose of this reference manual is to provide enough instruction on TOPIC reg-sign so the user may begin accessing the data contained in the HSSDS

  4. Caustic-Side Solvent Extraction: Chemical and Physical Properties of the Optimized Solvent

    Energy Technology Data Exchange (ETDEWEB)

    Delmau, L.H.

    2002-10-08

    This work was undertaken to optimize the solvent used in the Caustic Side Solvent Extraction (CSSX) process and to measure key chemical and physical properties related to its performance in the removal of cesium from the alkaline high-level salt waste stored in tanks at the Savannah River Site. The need to adjust the solvent composition arose from the prior discovery that the previous baseline solvent was supersaturated with respect to the calixarene extractant. The following solvent-component concentrations in Isopar{reg_sign} L diluent are recommended: 0.007 M calix[4]arene-bis(tert-octylbenzo-crown-6) (BOBCalixC6) extractant, 0.75 M 1-(2,2,3,3-tetrafluoropropoxy)-3-(4-sec-butylphenoxy)-2-propanol (Cs-7SB) phase modifier, and 0.003 M tri-n-octylamine (TOA) stripping aid. Criteria for this selection included BOBCalixC6 solubility, batch cesium distribution ratios (D{sub Cs}), calculated flowsheet robustness, third-phase formation, coalescence rate (dispersion numbers), and solvent density. Although minor compromises within acceptable limits were made in flowsheet robustness and solvent density, significant benefits were gained in lower risk of third-phase formation and lower solvent cost. Data are also reported for the optimized solvent regarding the temperature dependence of D{sub Cs} in extraction, scrubbing, and stripping (ESS); ESS performance on recycle; partitioning of BOBCalixC6, Cs-7SB, and TOA to aqueous process solutions; partitioning of organic anions; distribution of metals; solvent phase separation at low temperatures; solvent stability to elevated temperatures; and solvent density and viscosity. Overall, the technical risk of the CSSX process has been reduced by resolving previously identified issues and raising no new issues.

  5. Comparative exergy analyses of Jatropha curcas oil extraction methods: Solvent and mechanical extraction processes

    International Nuclear Information System (INIS)

    Ofori-Boateng, Cynthia; Keat Teong, Lee; JitKang, Lim

    2012-01-01

    Highlights: ► Exergy analysis detects locations of resource degradation within a process. ► Solvent extraction is six times exergetically destructive than mechanical extraction. ► Mechanical extraction of jatropha oil is 95.93% exergetically efficient. ► Solvent extraction of jatropha oil is 79.35% exergetically efficient. ► Exergy analysis of oil extraction processes allow room for improvements. - Abstract: Vegetable oil extraction processes are found to be energy intensive. Thermodynamically, any energy intensive process is considered to degrade the most useful part of energy that is available to produce work. This study uses literature values to compare the efficiencies and degradation of the useful energy within Jatropha curcas oil during oil extraction taking into account solvent and mechanical extraction methods. According to this study, J. curcas seeds on processing into J. curcas oil is upgraded with mechanical extraction but degraded with solvent extraction processes. For mechanical extraction, the total internal exergy destroyed is 3006 MJ which is about six times less than that for solvent extraction (18,072 MJ) for 1 ton J. curcas oil produced. The pretreatment processes of the J. curcas seeds recorded a total internal exergy destructions of 5768 MJ accounting for 24% of the total internal exergy destroyed for solvent extraction processes and 66% for mechanical extraction. The exergetic efficiencies recorded are 79.35% and 95.93% for solvent and mechanical extraction processes of J. curcas oil respectively. Hence, mechanical oil extraction processes are exergetically efficient than solvent extraction processes. Possible improvement methods are also elaborated in this study.

  6. Taking Care of Your Skin

    Science.gov (United States)

    ... Educators Search English Español Taking Care of Your Skin KidsHealth / For Kids / Taking Care of Your Skin ... you're in. Why Be Nice to Your Skin? Like the heart, stomach, and brain, your skin ...

  7. Taking Care of Pressure Sores

    Science.gov (United States)

    ... Tract Infections: Indwelling (Foley) Catheter Taking Care of Pressure Sores [Download this pamphlet: "Taking Care of Pressure Sores" - ( ... may not show up right away. Stages of pressure sores and how to care for them: STAGE ONE ...

  8. A new probe of solvent accessibility of bound photosensitizers. 1. Ruthenium(II) and osmium(II) photosensitizers in sodium lauryl sulfate micelles

    International Nuclear Information System (INIS)

    Hauenstein, B.L. Jr.; Dressick, W.J.; Buell, S.L.; Demas, J.N.; DeGraff, B.A.

    1983-01-01

    A new method of measuring solvent accessibility of photosensitizers bound to organized media is presented. In particular, the solvent accessibility of a series of ruthenium(II) and osmium(II) photosensitizers bound to sodium lauryl sulfate micelles has been determined. The method takes advantage of the large solvent deuterium effect on the excited-state lifetimes of these complexes. The solvent accessibility of the bound complexes correlates with the hydrophobicity of the ligands. The potential application of this method to a variety of other systems is mentioned

  9. Analysis of solvent extracts from coal liquefaction in a flowing solvent reactor

    Energy Technology Data Exchange (ETDEWEB)

    Li, Wen-Ying; Feng, Jie; Xie, Ke-Chang [Key Laboratory of Coal Science and Technology, Taiyuan University of Technology, Ministry of Education and Shanxi Province, No. 79 Yingze West Street, Taiyuan 030024 (China); Kandiyoti, R. [Department of Chemical Engineering and Chemical Technology, Imperial College, University of London, London SW7 2BY (United Kingdom)

    2004-10-15

    Point of Ayr coal has been extracted using three solvents, tetralin, quinoline and 1-methyl-2-pyrrolidinone (NMP) at two temperatures 350 and 450 C, corresponding approximately to before and after the onset of massive covalent bond scission by pyrolysis. The three solvents differ in solvent power and the ability to donate hydrogen atoms to stabilise free radicals produced by pyrolysis of the coal. The extracts were prepared in a flowing solvent reactor to minimise secondary thermal degradation of the primary extracts. Analysis of the pentane-insoluble fractions of the extracts was achieved by size exclusion chromatography, UV-fluorescence spectroscopy in NMP solvent and probe mass. With increasing extraction temperature, the ratio of the amount having big molecular weight to that having small molecular weight in tetralin extracts was increased; the tetralin extract yield increased from 12.8% to 75.9%; in quinoline, increasing extraction temperature did not have an effect on the molecular weight of products but there was a big increase in extract yield. The extracts in NMP showed the enhanced solvent extraction power at both temperatures, with a shift in the ratio of larger molecules to smaller molecules with increasing extraction temperature and with the highest conversion of Point of Ayr coal among these three solvents at both temperatures. Solvent adducts were detected in the tetralin and quinoline extracts by probe mass spectrometry; solvent products were formed from NMP at both temperatures.

  10. Substitution of Organic Solvents - a Way to improve Working Environment and reduce Emissions to the Atmosphere

    DEFF Research Database (Denmark)

    Jacobsen, Thomas

    1996-01-01

    solvents as cleaning agents has been reached. However, some barriers to this substitution process, are found outside the printing companies. In designing of machines and auxiliary equipment, the manufacturers must take into account, that cleaning with non-volatile agents should be possible. Even a rather...... the process in order to omit the solvents or to use water-based products. In cases, where a change to water-based is not evident, improvements can be reached by using non-volatile, low-toxic products, typically esters of fatty acids from vegetable oils. In offset printing a drastic reduction of use of organic...

  11. Coping Rarely Takes Place in a Social Vacuum: Exploring Dyadic Coping in Coach-Athlete Relationships

    OpenAIRE

    Staff, H; Didymus, FF; Backhouse, S

    2017-01-01

    Objectives: Despite widespread acceptance that coping is an interpersonal phenomenon, sport psychology research has focused largely on athletes' and coaches’ ways of coping individually. The aim of this study was to qualitatively explore coping from an interpersonal perspective (i.e., dyadic coping) in coach-athlete relationships. Methodology and methods: Antecedents and outcomes of dyadic coping were discussed with five coach-athlete dyads. We conducted individual interviews with athletes an...

  12. Ambulatory care pavilion takes its place out front by solving multiple needs.

    Science.gov (United States)

    Saukaitis, C A

    1994-09-01

    In sum, this structure exemplifies the fact that high-tech tertiary care medical centers can be user-friendly to the ambulatory health care consumer by serving their routine needs conveniently and efficiently. Says Gerald Miller, president of Crozer-Chester: "The ambulatory care pavilion has enabled Crozer to successfully and efficiently merge physicians' offices with institutional-based services and inpatient services. We are pleased with how the pavilion positions our medical center for the next century.

  13. Subsurface nitrate reduction under wetlands takes place in narrow superficial zones

    DEFF Research Database (Denmark)

    dos Santos Ribas, Osmar; Calderer, M.; Marti, Vicens

    2017-01-01

    This study aims to investigate the depth distribution of the Nitrate Reduction Potential (NRP) on a natural and a re-established wetland. The obtained NRP provides a valuable data of the driving factors affecting denitrification, the Dissimilatory Nitrate Reduction to Ammonium (DNRA) process and ...... that wetlands can be restored satisfactorily.......This study aims to investigate the depth distribution of the Nitrate Reduction Potential (NRP) on a natural and a re-established wetland. The obtained NRP provides a valuable data of the driving factors affecting denitrification, the Dissimilatory Nitrate Reduction to Ammonium (DNRA) process...... and the performance of a re-established wetland. Intact soil cores were collected and divided in slices for the determination of Organic Matter (OM) through Loss of Ignition (LOI) as well as Dissolved Organic Carbon (DOC) and NRP spiking nitrate in batch tests. The Nitrate Reduction (NR) was fitted as a pseudo...

  14. Taking Stock, Placing Orders: A Historiographic Essay on the Business History of the Newspaper.

    Science.gov (United States)

    Smith, Carol; Dyer, Carolyn Stewart

    This historiographic essay discusses and seeks to begin to address the need for a business history of the newspaper. The paper's first section clarifies the terms "business history,""economic history,""political history," and "history of economics," (which the paper suggests have been used interchangeably in…

  15. Implementation of European Directive on Optical Radiation Safety takes place in May 2010

    NARCIS (Netherlands)

    Wieringa, F.P.

    2009-01-01

    At the latest by May 10th 2010, Directive 2006/25/EC regarding the exposure of workers to risks arising from artificial optical radiation must be implemented by all EU-member states, thus legally adopting ICNIRP limit values for ultraviolet, visible and infrared radiation. For IUVA-members the

  16. Necroptosis takes place in human immunodeficiency virus type-1 (HIV-1-infected CD4+ T lymphocytes.

    Directory of Open Access Journals (Sweden)

    Ting Pan

    Full Text Available Human immunodeficiency virus type 1 (HIV-1 infection is characterized by progressive depletion of CD4+ T lymphocytes and dysfunction of the immune system. The numbers of CD4+ T lymphocytes in the human body are maintained constantly by homeostatic mechanisms that failed during HIV-1 infection, resulting in progressive loss of CD4+ T cells mainly via apoptosis. Recently, a non-apoptotic form of necrotic programmed cell death, named necroptosis, has been investigated in many biological and pathological processes. We then determine whether HIV-1-infected cells also undergo necroptosis. In this report, we demonstrate that HIV-1 not only induces apoptosis, but also mediates necroptosis in the infected primary CD4+ T lymphocytes and CD4+ T-cell lines. Necroptosis-dependent cytopathic effects are significantly increased in HIV-1-infected Jurkat cells that is lack of Fas-associated protein-containing death domain (FADD, indicating that necroptosis occurs as an alternative cell death mechanism in the absence of apoptosis. Unlike apoptosis, necroptosis mainly occurs in HIV-infected cells and spares bystander damage. Treatment with necrostatin-1(Nec-1, a RIP1 inhibitor that specifically blocks the necroptosis pathway, potently restrains HIV-1-induced cytopathic effect and interestingly, inhibits the formation of HIV-induced syncytia in CD4+ T-cell lines. This suggests that syncytia formation is mediated, at least partially, by necroptosis-related processes. Furthermore, we also found that the HIV-1 infection-augmented tumor necrosis factor-alpha (TNF-α plays a key role in inducing necroptosis and HIV-1 Envelope and Tat proteins function as its co-factors. Taken together,necroptosis can function as an alternative cell death pathway in lieu of apoptosis during HIV-1 infection, thereby also contributing to HIV-1-induced cytopathic effects. Our results reveal that in addition to apoptosis, necroptosis also plays an important role in HIV-1-induced pathogenesis.

  17. Characterization and performances of DOSION, a dosimetry equipment dedicated to radiobiology experiments taking place at GANIL

    Energy Technology Data Exchange (ETDEWEB)

    Boissonnat, Guillaume, E-mail: boissonnat@lpccaen.in2p3.fr [LPC (Normandie Univ-ENSICAEN-UNICAEN-CNRS/IN2P3), 6 Bd Maréchal Juin, 14050 Caen (France); Fontbonne, Jean-Marc [LPC (Normandie Univ-ENSICAEN-UNICAEN-CNRS/IN2P3), 6 Bd Maréchal Juin, 14050 Caen (France); Balanzat, Emmanuel [CIMAP (CEA/DSM-CNRS/INP-ENSICAEN-UNICAEN), Bd Henri Becquerel, 14076 Caen (France); Boumard, Frederic; Carniol, Benjamin [LPC (Normandie Univ-ENSICAEN-UNICAEN-CNRS/IN2P3), 6 Bd Maréchal Juin, 14050 Caen (France); Cassimi, Amine [CIMAP (CEA/DSM-CNRS/INP-ENSICAEN-UNICAEN), Bd Henri Becquerel, 14076 Caen (France); Colin, Jean; Cussol, Daniel; Etasse, David; Fontbonne, Cathy [LPC (Normandie Univ-ENSICAEN-UNICAEN-CNRS/IN2P3), 6 Bd Maréchal Juin, 14050 Caen (France); Frelin, Anne-Marie [GANIL (CEA/DSM-CNRS/IN2P3), Bd Henri Becquerel, 14076 Caen (France); Hommet, Jean; Salvador, Samuel [LPC (Normandie Univ-ENSICAEN-UNICAEN-CNRS/IN2P3), 6 Bd Maréchal Juin, 14050 Caen (France)

    2017-06-01

    Currently, radiobiology experiments using heavy ions at GANIL (Grand Accélérateur National d′Ions Lourds) are conducted under the supervision of the CIMAP (Center for research on Ions, MAterials and Photonics). In this context, a new beam monitoring equipment named DOSION has been developed. It allows to perform measurements of accurate fluence and dose maps in near real time for each biological sample irradiated. In this paper, we present the detection system, its design, performances, calibration protocol and measurements performed during radiobiology experiments. This setup is currently available for any radiobiology experiments if one wishes to correlate one's own sample analysis to state-of-the-art dosimetric references.

  18. Ac hopping conduction at extreme disorder takes place on the percolating cluster

    DEFF Research Database (Denmark)

    Schrøder, Thomas; Dyre, J. C.

    2008-01-01

    Simulations of the random barrier model show that ac currents at extreme disorder are carried almost entirely by the percolating cluster slightly above threshold; thus contributions from isolated low activation-energy clusters are negligible. The effective medium approximation in conjunction...

  19. Concholepas hemocyanin biosynthesis takes place in the hepatopancreas, with hemocytes being involved in its metabolism.

    Science.gov (United States)

    Manubens, Augusto; Salazar, Fabián; Haussmann, Denise; Figueroa, Jaime; Del Campo, Miguel; Pinto, Jonathan Martínez; Huaquín, Laura; Venegas, Alejandro; Becker, María Inés

    2010-12-01

    Hemocyanins are copper-containing glycoproteins in some molluscs and arthropods, and their best-known function is O(2) transport. We studied the site of their biosynthesis in the gastropod Concholepas concholepas by using immunological and molecular genetic approaches. We performed immunohistochemical staining of various organs, including the mantle, branchia, and hepatopancreas, and detected C. concholepas hemocyanin (CCH) molecules in circulating and tissue-associated hemocytes by electron microscopy. To characterize the hemocytes, we purified them from hemolymph. We identified three types of granular cells. The most abundant type was a phagocyte-like cell with small cytoplasmic granules. The second type contained large electron-dense granules. The third type had vacuoles containing hemocyanin molecules suggesting that synthesis or catabolism occurred inside these cells. Our failure to detect cch-mRNA in hemocytes by reverse transcription with the polymerase chain reaction (RT-PCR) led us to propose that hemocytes instead played a role in CCH metabolism. This hypothesis was supported by colloidal gold staining showing hemocyanin molecules in electron-dense granules inside hemocytes. RT-PCR analysis, complemented by in situ hybridization analyses with single-stranded antisense RNAs as specific probes, demonstrated the presence of cch-mRNA in the hepatopancreas; this was consistent with the specific hybridization signal and confirmed the hepatopancreas as the site of CCH synthesis. Finally, we investigated the possibility that CCH catabolism in hemocytes was involved in the host immune response and in the generation of secondary metabolites such as antimicrobial peptides and phenoloxidase.

  20. Activation pathways taking place at molecular copper precatalysts for the oxygen evolution reaction

    NARCIS (Netherlands)

    van der Ham, C.J.M.; Işık, F.; Verhoeven, T.W.G.M.; Niemantsverdriet, J.W.; Hetterscheid, D.G.H.

    2017-01-01

    The activation processes of [CuII(bdmpza)2] in the water oxidation reaction were investigated using cyclic voltammetry and chronoamperometry. Two different paths wherein CuO is formed were distinguished. [CuII(bdmpza)2] can be oxidized at high potentials to form CuO, which was observed by a slight