Multinational/regional repository - an illusion or solution

International Nuclear Information System (INIS)

Mele, I.

2006-01-01

The concept and current status of multinational and regional repositories are presented in the paper. Particular emphasis is given to the results and findings of the recent EU project SAPIERR, investigating the feasibility of regional repository concepts in Europe. Prospects for further development of multinational repositories are also brought forward and the impact and potential benefits of this approach to our national disposal programme are discussed as well. (author)

Analysis of the geological stability of a hypothetical radioactive waste repository in a bedded salt formation

International Nuclear Information System (INIS)

Tierney, M.S.; Lusso, F.; Shaw, H.R.

1978-01-01

This document reports on the development of mathematical models used in preliminary studies of the long-term safety of radioactive wastes deeply buried in bedded salt formations. Two analytical approaches to estimating the geological stability of a waste repository in bedded salt are described: (a) use of probabilistic models to estimate the a priori likelihoods of release of radionuclides from the repository through certain idealized natural and anthropogenic causes, and (b) a numerical simulation of certain feedback effects of emplacement of waste materials upon ground-water access to the repository's host rocks. These models are applied to an idealized waste repository for the sake of illustration

Effective summary evaluators for deep nuclear waste repositories: geohydrologic response function

International Nuclear Information System (INIS)

Nelson, R.W.; Dove, F.H.

1981-03-01

Useful insight has been gained over the past four years as hydrologic system modeling has been applied to evaluate hypothetical, waste-repository sites in various geologic media. The Geohydrologic Response Functions, described in this paper, are shown to: blend extensive results of technical analysis into simple summary relationships, and to potentially help the public and decision makers to evaluate the magnitude of any loss in repository integrity

The relationship of the Yucca Mountain repository block to the regional ground-water system: A geochemical model

International Nuclear Information System (INIS)

Matuska, N.A.; Hess, J.W.

1989-08-01

Yucca Mountain, in southern Nevada, is being studied by the Department of Energy and the State of Nevada as the site of a high-level nuclear waste repository. Geochemical and isotopic modeling were used in this study to define the relationship of the volcanic tuff aquifers and aquitards to the underlying regional carbonate ground-water system. The chemical evolution of a ground water as it passes through a hypothetical tuffaceous aquifer was developed using computer models PHREEQE, WATEQDR and BALANCE. The tuffaceous system was divided into five parts, with specific mineralogies, reaction steps and temperatures. The initial solution was an analysis of a soil water from Rainier Mesa. The ending solution in each part became the initial solution in the next part. Minerals consisted of zeolites, smectites, authigenic feldspars and quartz polymorphs from described diagentic mineral zones. Reaction steps were ion exchange with zeolites. The solution from the final zone, Part V, was chosen as most representative, in terms of pH, element molalities and mineral solubilities, of tuffaceous water. This hypothetical volcanic water from Part V was mixed with water from the regional carbonate aquifer, and the results compared to analyses of Yucca Mountain wells. Mixing and modeling attempts were conducted on wells in which studies indicated upward flow

Calculation of the ingestion critical dose rate for the Goiania radioactive waste repository

International Nuclear Information System (INIS)

Passos, E.M. dos; Martin Alves, A.S. De

1994-01-01

The calculation results of the critical distance for the ingestion dose rate due to a hypothetical Cs-137 release from the Abadia de Goias repository are shown. The work is based on the pathway repository-aquifer-well food chain. The calculations were based upon analytical models for the migration of radioisotopes through the aquifer and for its transfer from well water to food. (author)

How many geologic repositories will be needed

International Nuclear Information System (INIS)

Evans, T.J.; Halstead, R.J.

1987-01-01

DOE's postponement of site-specific work on the second repository program had rekindled debate over the number of geologic repositories needed for disposal of high level radioactive waste. The multiple repository approach grew out of the March, 1979 IRG report, which recommended co-disposal of civilian and defense HLW in a system of regional repositories. The multiple repository approach was adopted by DOE, and incorporated in the Nuclear Waste Policy Act passed by Congress in December, 1982. Since the late 1970's, the slower than anticipated growth of the nuclear power industry has substantially reduced earlier estimates of the amount of civilian spent fuel which will require geologic disposal. Reactors currently in operation (78.5 GWe) and reactors in the construction pipeline (28 GWe) are expected to discharge about 103,200 MTU of spent fuel by the year 2036, assuming no increase in fuel burnup rate. By the year 2020, defense high level radioactive wastes equivalent to as much as 27,000 MTU could require geologic disposal. Small amounts of high level waste from other sources will also require geologic disposal. Total disposal requirements appear to be less than 140,000 MTU. The five sites nominated for the first repository, as well as hypothetical sites in granite, the host rock under primary consideration for the second repository, all appear capable of accommodating up to 140,000 MTU

Geochemical modeling of the nuclear-waste repository system. A status report

International Nuclear Information System (INIS)

Deutsch, W.J.

1980-12-01

The primary objective of the geochemical modeling task is to develop an understanding of the waste-repository geochemical system and provide a valuable tool for estimating future states of that system. There currently exists a variety of computer codes which can be used in geochemical modeling studies. Some available codes contain the framework for simulating a natural chemical system and estimating, within limits, the response of that system to environmental changes. By data-base enhancement and code development, this modeling technique can be even more usefully applied to a nuclear-waste repository. In particular, thermodynamic data on elements not presently in the data base but identified as being of particular hazard in the waste-repository system, need to be incorporated into the code to estimate the near-field as well as the far-field reactions during a hypothetical breach. A reaction-path-simulation code, which estimates the products of specific rock/water reactions, has been tested using basalt and ground water. Results show that the mass-transfer capabilities of the code will be useful in chemical-evolution studies and scenario analyses. The purpose of this report is to explain the status of geochemical modeling as it currently applies to the chemical system of a hypothetical nuclear-waste repository in basalt and to present the plan proposed for further developmet and application

Preliminary concepts: materials management in an internationally safeguarded nuclear-waste geologic repository

International Nuclear Information System (INIS)

Ostenak, C.A.; Whitty, W.J.; Dietz, R.J.

1979-11-01

Preliminary concepts of materials accountability are presented for an internationally safeguarded nuclear-waste geologic repository. A hypothetical reference repository that receives nuclear waste for emplacement in a geologic medium serves to illustrate specific safeguards concepts. Nuclear wastes received at the reference repository derive from prior fuel-cycle operations. Alternative safeguards techniques ranging from item accounting to nondestructive assay and waste characteristics that affect the necessary level of safeguards are examined. Downgrading of safeguards prior to shipment to the repository is recommended whenever possible. The point in the waste cycle where international safeguards may be terminate depends on the fissile content, feasibility of separation, and practicable recoverability of the waste: termination may not be possible if spent fuels are declared as waste

Thermoelastic analysis of spent fuel and high level radioactive waste repositories in salt. A semi-analytical solution

International Nuclear Information System (INIS)

St John, C.M.

1977-04-01

An underground repository containing heat generating, High Level Waste or Spent Unreprocessed Fuel may be approximated as a finite number of heat sources distributed across the plane of the repository. The resulting temperature, displacement and stress changes may be calculated using analytical solutions, providing linear thermoelasticity is assumed. This report documents a computer program based on this approach and gives results that form the basis for a comparison between the effects of disposing of High Level Waste and Spent Unreprocessed Fuel

Retrieval effects on ventilation and cooling requirements for a nuclear waste repository

International Nuclear Information System (INIS)

Hambley, D.F.

1985-01-01

The Nuclear Waste Policy Act of 1982 (Public Law 97-425) and the regulations promulgated in Title 10, Part 60 of the Code of Federal Regulations (10CFR60) by the US Nuclear Regulatory Commission (NRC) for an underground repository for spent fuel and high level nuclear waste (HLW) require that it is possible to retrieve waste, for whatever reason, from such a facility for a period of 50 years from initial storage or until the completion of the performance confirmation period, whichever comes first. This paper considers the effects that the retrievability option mandates on ventilation and cooling systems required for normal repository operations. An example is given for a hypothetical repository in salt. 18 refs., 1 tab

Infiltration analysis for Abadia de Goias repository: numerical solution; Analise de infiltracao para o repositorio de Abadia de Goias: solucao numerica

Energy Technology Data Exchange (ETDEWEB)

Martin Alves, Antonio S. de [NUCLEN, Rio de Janeiro, RJ (Brazil); Passos, Aline M.M. dos [Universidade Federal Fluminense, Niteroi, RJ (Brazil)

1997-12-01

The safety analysis of a structure known as repository for medium activity wastes leads to investigating the physical phenomena connected to the water infiltration. This work shows succinctly an engineering approach to obtain numerical results for the model differential equations. One of these equations, related to the two-phase flow within the structure, is a nonlinear Riccati type, whose solution is only known for certain cases. For safety analysis and design purposes, the solution for the case of variable parameters is also advantageous when one aims some accident scenarios analysis. The utilization of numerical techniques allowed excellent results applied for the design of the Abadia de Goias repository. The case treated in this paper was one of those applied to the safety assessment of this repository. (author). 7 refs., 4 figs., 7 tabs.

Spent fuel performance assessment (SPA) for a hypothetical repository in crystalline formations in Germany

International Nuclear Information System (INIS)

Luehrmann, L.; Noseck, U.; Storck, R.

2000-07-01

Within the framework of this project a first long-term safety assessment study for a generic German repository with spent nuclear fuel in granite host formations has been performed. Conceptual models have been developed and implemented into the numerical codes. These models describe the relevant processes in the near and far field of the repository. For the nuclide mobilisation and the diffusion-controlled transport through the bentonite barrier the computer code GRAPOS for far-field transport the code CHETMAD has been developed. Transport in the far field has been assumed to take place in a fracture network. As retardation mechanism matrix diffusion accompanied by linear equilibrium sorption on the rock matrix is considered. Both codes have been tested by intercomparison with codes of other countries. The dose rates have been calculated by the code EXCON considering the transport pathways into the biosphere. A reference scenario has been defined. It considers instantaneous saturation of the bentonite immediately after the operational phase of the repository, failure of all containers after 1000 years, diffusion through the bentonite, transport through fractured dykes, which represent a fast transport pathway in the low permeability region of the granite. The nuclide mobilization has been calculated according to a common source term which has been developed by all participants of the SPA project. It is assumed that 25% of the containers are connected to the considered transport pathway in the far field. The nuclides are transported to layers close to the surface. The contaminated water is pumped from a surface well and used for drinking, irrigation, cattle feed and fish ponds. (orig.) [de

Comparison of the results of several heat transfer computer codes when applied to a hypothetical nuclear waste repository

International Nuclear Information System (INIS)

Claiborne, H.C.; Wagner, R.S.; Just, R.A.

1979-12-01

A direct comparison of transient thermal calculations was made with the heat transfer codes HEATING5, THAC-SIP-3D, ADINAT, SINDA, TRUMP, and TRANCO for a hypothetical nuclear waste repository. With the exception of TRUMP and SINDA (actually closer to the earlier CINDA3G version), the other codes agreed to within +-5% for the temperature rises as a function of time. The TRUMP results agreed within +-5% up to about 50 years, where the maximum temperature occurs, and then began an oscillary behavior with up to 25% deviations at longer times. This could have resulted from time steps that were too large or from some unknown system problems. The available version of the SINDA code was not compatible with the IBM compiler without using an alternative method for handling a variable thermal conductivity. The results were about 40% low, but a reasonable agreement was obtained by assuming a uniform thermal conductivity; however, a programming error was later discovered in the alternative method. Some work is required on the IBM version to make it compatible with the system and still use the recommended method of handling variable thermal conductivity. TRANCO can only be run as a 2-D model, and TRUMP and CINDA apparently required longer running times and did not agree in the 2-D case; therefore, only HEATING5, THAC-SIP-3D, and ADINAT were used for the 3-D model calculations. The codes agreed within +-5%; at distances of about 1 ft from the waste canister edge, temperature rises were also close to that predicted by the 3-D model

Postclosure safety assessment of a used fuel repository in sedimentary rock

International Nuclear Information System (INIS)

Gobien, M.; Garisto, F.; Hunt, N.; Kremer, E.

2014-01-01

The Nuclear Waste Management Organization (NWMO) is responsible for the implementation of Adaptive Phased Management (APM), the federally-approved plan for safe long-term management of Canada's used nuclear fuel. Under the APM plan, used nuclear fuel will ultimately be placed within a deep geological repository in a suitable rock formation. This paper summarizes an illustrative case study of the current multi-barrier design and postclosure safety of a deep geological repository in a hypothetical sedimentary Michigan Basin setting. The purpose of this postclosure safety assessment is to determine potential effects of the repository on the health and safety of persons and the environment. Results are compared against acceptance criteria established for the protection of persons and the environment from potential radiological and non-radiological hazards. (author)

Postclosure safety assessment of a used fuel repository in sedimentary rock

Energy Technology Data Exchange (ETDEWEB)

Gobien, M.; Garisto, F.; Hunt, N.; Kremer, E. [Nuclear Waste Management Organization, Toronto, ON (Canada)

2014-07-01

The Nuclear Waste Management Organization (NWMO) is responsible for the implementation of Adaptive Phased Management (APM), the federally-approved plan for safe long-term management of Canada's used nuclear fuel. Under the APM plan, used nuclear fuel will ultimately be placed within a deep geological repository in a suitable rock formation. This paper summarizes an illustrative case study of the current multi-barrier design and postclosure safety of a deep geological repository in a hypothetical sedimentary Michigan Basin setting. The purpose of this postclosure safety assessment is to determine potential effects of the repository on the health and safety of persons and the environment. Results are compared against acceptance criteria established for the protection of persons and the environment from potential radiological and non-radiological hazards. (author)

Towards Interoperable Preservation Repositories: TIPR

Directory of Open Access Journals (Sweden)

Priscilla Caplan

2010-07-01

Full Text Available Towards Interoperable Preservation Repositories (TIPR is a project funded by the Institute of Museum and Library Services to create and test a Repository eXchange Package (RXP. The package will make it possible to transfer complex digital objects between dissimilar preservation repositories.  For reasons of redundancy, succession planning and software migration, repositories must be able to exchange copies of archival information packages with each other. Every different repository application, however, describes and structures its archival packages differently. Therefore each system produces dissemination packages that are rarely understandable or usable as submission packages by other repositories. The RXP is an answer to that mismatch. Other solutions for transferring packages between repositories focus either on transfers between repositories of the same type, such as DSpace-to-DSpace transfers, or on processes that rely on central translation services.  Rather than build translators between many dissimilar repository types, the TIPR project has defined a standards-based package of metadata files that can act as an intermediary information package, the RXP, a lingua franca all repositories can read and write.

Engineering solution for the backfilling and sealing of radioactive waste repositories

International Nuclear Information System (INIS)

Jorda, M.; Gouvenot, D.; Bonne, A.; Lees, T.P.; Schmidt, M.

1990-01-01

To ensure the safety of radioactive waste deep disposal, backfilling and sealing materials (engineered barriers) have to be used to fill residual voids. For granite medium, stress is put on emplacement techniques for cement- and clay-based materials, including in-situ validation. For clay medium, mined repository and deep boreholes drilled from the surface are considered. In the case of the first solution, the thermomechanical behaviour of a clay backfill is studied. In the same way, backfill made of excavated crushed salt is considered and thermomechanical properties evaluated by means of laboratory tests and in-situ experiments. Finally, basic works on quality assurance procedures and historic concretes behaviour are reported

Testing and intercomparison of model predictions of radionuclide migration from a hypothetical area source

International Nuclear Information System (INIS)

O'Brien, R.S.; Yu, C.; Zeevaert, T.; Olyslaegers, G.; Amado, V.; Setlow, L.W.; Waggitt, P.W.

2008-01-01

This work was carried out as part of the International Atomic Energy Agency's EMRAS program. One aim of the work was to develop scenarios for testing computer models designed for simulating radionuclide migration in the environment, and to use these scenarios for testing the models and comparing predictions from different models. This paper presents the results of the development and testing of a hypothetical area source of NORM waste/residue using two complex computer models and one screening model. There are significant differences in the methods used to model groundwater flow between the complex models. The hypothetical source was used because of its relative simplicity and because of difficulties encountered in finding comprehensive, well-validated data sets for real sites. The source consisted of a simple repository of uniform thickness, with 1 Bq g -1 of uranium-238 ( 238 U) (in secular equilibrium with its decay products) distributed uniformly throughout the waste. These approximate real situations, such as engineered repositories, waste rock piles, tailings piles and landfills. Specification of the site also included the physical layout, vertical stratigraphic details, soil type for each layer of material, precipitation and runoff details, groundwater flow parameters, and meteorological data. Calculations were carried out with and without a cover layer of clean soil above the waste, for people working and living at different locations relative to the waste. The predictions of the two complex models showed several differences which need more detailed examination. The scenario is available for testing by other modelers. It can also be used as a planning tool for remediation work or for repository design, by changing the scenario parameters and running the models for a range of different inputs. Further development will include applying models to real scenarios and integrating environmental impact assessment methods with the safety assessment tools currently

Radionuclide Transport in Fractured Rock: Numerical Assessment for High Level Waste Repository

Directory of Open Access Journals (Sweden)

Claudia Siqueira da Silveira

2013-01-01

Full Text Available Deep and stable geological formations with low permeability have been considered for high level waste definitive repository. A common problem is the modeling of radionuclide migration in a fractured medium. Initially, we considered a system consisting of a rock matrix with a single planar fracture in water saturated porous rock. Transport in the fracture is assumed to obey an advection-diffusion equation, while molecular diffusion is considered the dominant mechanism of transport in porous matrix. The partial differential equations describing the movement of radionuclides were discretized by finite difference methods, namely, fully explicit, fully implicit, and Crank-Nicolson schemes. The convective term was discretized by the following numerical schemes: backward differences, centered differences, and forward differences. The model was validated using an analytical solution found in the literature. Finally, we carried out a simulation with relevant spent fuel nuclide data with a system consisting of a horizontal fracture and a vertical fracture for assessing the performance of a hypothetical repository inserted into the host rock. We have analysed the bentonite expanded performance at the beginning of fracture, the quantified radionuclide released from a borehole, and an estimated effective dose to an adult, obtained from ingestion of well water during one year.

Properties of altered soils by alkaline solution: contribution in the performance evaluation of repositories

International Nuclear Information System (INIS)

Calabria, Jaqueline Alves de Almeida

2015-01-01

The radioactive wastes from nuclear technology applications must be properly disposed in a repository, during the necessary time to ensure the human and the environment protection. The surface systems are largely considered for disposal of low and intermediate level radioactive waste, but generally require the use of engineering barriers to control the radionuclides release. An important engineering barrier is the backfill which is situated between the package and structural material, and has the functions of reducing the water infiltration and to promote the retardation of the radionuclide migration, among others. Therefore, the material to be used as backfill such as clays, cement, soils, rocks, must has good sorption, permeability and mechanical properties. The selection of the material will depend also largely on the material availability and installation design. The concrete is also used in the construction of repository, and its interaction with water induces its degradation, resulting in a high pH solution. This solution interacts with the backfilling materials promoting mineralogical alterations that results in significant changes in their key properties and performance as safety component of the repository. In this work, five Brazilian soils of Minas Gerais state, selected according to their generic characteristics along with information from Sistema Brasileiro de Classificacao de Solos (SiBCS) were investigated concerning their potential use as backfilling material in a superficial repository by the determination of retention capacity for cesium and iodine. Sorption-related parameters, used in the performance assessment of the soils, were obtained from experimental data fitting to different sorption isotherms models. The soil that showed the best sorption of Cs, was a clay soil that presented distribution coefficient (K_d) of 90.5 mL.g"-"1 and maximum sorption capacity (Q_m_a_x) of 18.372 mg.g"-"1. Regarding the iodine, the sorption was very low for all

Proposals of principles for design of repositories according to KBS-3 for Aberg, Beberg and Ceberg (Arock, Berock and Cerock)

International Nuclear Information System (INIS)

Munier, R.; Sandstedt, H.; Niland, L.

1997-05-01

Three hypothetical Swedish candidate sites for a radioactive waste repository are examined in this report. Based on geological surveys in the areas, fracture zones have been classified and 'safety distances' to these zones defined. Repository layouts for the different sites were then made after the above data with the deposition tunnels situated at right angels and parallel to the greatest horizontal stress directions. 19 refs, 44 figs

SKI SITE-94, deep repository performance assessment project, summary

International Nuclear Information System (INIS)

1999-01-01

SITE-94 is a comprehensive performance assessment exercise for a hypothetical repository for spent nuclear fuel at a real site in Sweden. SITE-94 was carried out to develop the capability and tools to enable Swedish Nuclear Power Inspectorate (SKI) to review fully the proposals for a deep repository which are expected to be made by the Swedish Nuclear Fuel and Waste Management Company, SKB (the implementor). Sweden is one of the leading countries in the research and development of geological disposal of radioactive waste. The developed methodology for performance assessment has attracted interests from other countries. The Summary of the main report of the SITE-94 project is translated here into Japanese to allow to make the information on the methodology and the related issues available among Japanese concerned. (author)

Solution of Einstein's Geometrical Gravitational Field Equations Exterior to Astrophysically Real or Hypothetical Time Varying Distributions of Mass within Regions of Spherical Geometry

Directory of Open Access Journals (Sweden)

Chifu E. N.

2009-07-01

Full Text Available Here, we present a profound and complete analytical solution to Einstein’s gravitational field equations exterior to astrophysically real or hypothetical time varying distribu- tions of mass or pressure within regions of spherical geometry. The single arbitrary function f in our proposed exterior metric tensor and constructed field equations makes our method unique, mathematically less combersome and astrophysically satisfactory. The obtained solution of Einstein’s gravitational field equations tends out to be a gen- eralization of Newton’s gravitational scalar potential exterior to the spherical mass or pressure distribution under consideration

Shared Medical Imaging Repositories.

Science.gov (United States)

Lebre, Rui; Bastião, Luís; Costa, Carlos

2018-01-01

This article describes the implementation of a solution for the integration of ownership concept and access control over medical imaging resources, making possible the centralization of multiple instances of repositories. The proposed architecture allows the association of permissions to repository resources and delegation of rights to third entities. It includes a programmatic interface for management of proposed services, made available through web services, with the ability to create, read, update and remove all components resulting from the architecture. The resulting work is a role-based access control mechanism that was integrated with Dicoogle Open-Source Project. The solution has several application scenarios like, for instance, collaborative platforms for research and tele-radiology services deployed at Cloud.

Diffusion Dominant Solute Transport Modelling In Deep Repository Under The Effect of Emplacement Media Degradation - 13285

International Nuclear Information System (INIS)

Kwong, S.; Jivkov, A.P.

2013-01-01

Deep geologic disposal of high activity and long-lived radioactive waste is being actively considered and pursued in many countries, where low permeability geological formations are used to provide long term waste contaminant with minimum impact to the environment and risk to the biosphere. A multi-barrier approach that makes use of both engineered and natural barriers (i.e. geological formations) is often used to further enhance the containment performance of the repository. As the deep repository system subjects to a variety of thermo-hydro-chemo-mechanical (THCM) effects over its long 'operational' lifespan (e.g. 0.1 to 1.0 million years, the integrity of the barrier system will decrease over time (e.g. fracturing in rock or clay)). This is broadly referred as media degradation in the present study. This modelling study examines the effects of media degradation on diffusion dominant solute transport in fractured media that are typical of deep geological environment. In particular, reactive solute transport through fractured media is studied using a 2-D model, that considers advection and diffusion, to explore the coupled effects of kinetic and equilibrium chemical processes, while the effects of degradation is studied using a pore network model that considers the media diffusivity and network changes. Model results are presented to demonstrate the use of a 3D pore-network model, using a novel architecture, to calculate macroscopic properties of the medium such as diffusivity, subject to pore space changes as the media degrade. Results from a reactive transport model of a representative geological waste disposal package are also presented to demonstrate the effect of media property change on the solute migration behaviour, illustrating the complex interplay between kinetic biogeochemical processes and diffusion dominant transport. The initial modelling results demonstrate the feasibility of a coupled modelling approach (using pore-network model and reactive

Analysis of corrosion data for carbon steels in simulated salt repository brines and acid chloride solutions at high temperatures

International Nuclear Information System (INIS)

Diercks, D.R.; Hull, A.B.; Kassner, T.F.

1988-03-01

Carbon steel is currently the leading candidate material for fabrication of a container for isolation of high level nuclear waste in a salt repository. Since brine entrapped in the bedded salt can migrate to the container by several transport processes, corrosion is an important consideration in the long-term performance of the waste package. A detailed literature search was performed to compile relevant corrosion data for carbon steels in anoxic acid chloride solutions, and simulated salt repository brines at temperatures between ∼ 20 and 400 0 C. The hydrolysis of Mg 2+ ions in simulated repository brines containing high magnesium concentrations causes acidification at temperatures above 25 0 C, which, in turn, influences the protective nature of the magnetite corrosion product layer on carbon steel. The corrosion data for the steels were analyzed, and an analytical model for general corrosion was developed to calculate the amount of penetration (i.e., wall thinning) as a function of time, temperature, and the pressure of corrosion product hydrogen than can build up during exposure in a closed system (e.g., a sealed capsule). Both the temperature and pressure dependence of the corrosion rate of steels in anoxic acid chloride solutions indicate that the rate-controlling partial reaction is the cathodic reduction of water to form hydrogen. Variations in the composition and microstructure of the steels or the concentration of the ionic species in the chloride solutions (provided that they do not change the pH significantly) do not appear to strongly influence the corrosion rate

Semantic Linking of Learning Object Repositories to DBpedia

Science.gov (United States)

Lama, Manuel; Vidal, Juan C.; Otero-Garcia, Estefania; Bugarin, Alberto; Barro, Senen

2012-01-01

Large-sized repositories of learning objects (LOs) are difficult to create and also to maintain. In this paper we propose a way to reduce this drawback by improving the classification mechanisms of the LO repositories. Specifically, we present a solution to automate the LO classification of the Universia repository, a collection of more than 15…

Building the safety case for a hypothetical underground repository in crystalline rock. Final report. Vol. 2. Safety file

International Nuclear Information System (INIS)

Biurrun, E.; Engelmann, H.J.; Jobmann, M.; Lommerzheim, A.; Popp, W.; Frentz, R.R. v.; Wahl, A.

1996-10-01

The study was intended as a desk simulation of the process of preparing a licensing application for a deep repository for spent fuel and high level waste in crystalline rock. After clarifying of organizational aspects of table of contents specifying all aspects in a safety life for license application were considered. The volume II is subdivided in two parts. Part A describes the general information, waste description, site characteristics, disposal facility design, reporitory construction and operation, quality assurance, operational safety, repository closure, organization and financial aspects, and long-term safety assessment. Part B deals with the impact of retrievability. (DG)

Requirements for controlling a repository's releases of carbon-14 dioxide; the high costs and negligible benefits

International Nuclear Information System (INIS)

Park, U Sun; Pflum, C.G.

1990-01-01

A repository excavated within the unsaturated zone may release carbon (C)-14 dioxide in amounts that exceed limits imposed by the Environmental Protection Agency (EPA) and the Nuclear Regulatory Commission (NRC). The release would not threaten the general population, but may expose some hypothetical maximally exposed individual to 0.0005 millirems/year. Yet a repository's releases of C-14 dioxide are strictly regulated, perhaps unintentionally. The EPA and NRC regulations could force the Department of Energy to design and fabricate an expensive 10,000-year waste package solely for the sake of controlling releases of C-14 dioxide. This paper argues that the repository regulations should exempt releases of C-14 dioxide or at least impose more equitable limits. 21 refs., 1 tab

Disruption scenarios for a nuclear-waste repository on the Nevada Test Site

International Nuclear Information System (INIS)

Link, R.L.; Bingham, F.W.; Barr, G.E.

1981-01-01

Scenarios are being constructed for the release of radioactive maerial from hypothetical repositories in different types of rock at NTS. Deductive event trees are constructed; each path through an event tree is a scenario. The complete set of NTS event trees comprises about 340 scenarios, not counting the multiple paths through the subtrees made by expanding complex events. Each of these scenarios is being analyzed for 10 different types of rocks

A GoldSim Model and a Sensitivity Study for Safety Assessment of a Repository for Disposal of Spent Nuclear Fuel

International Nuclear Information System (INIS)

Lee, Youn Myoung; Hwang, Yong Soo

2008-11-01

An assessment program for the evaluation of a high-level waste (HLW) repository has been developed by utilizing GoldSim, by which nuclide transports in the near- and far-field of a repository as well as a transport through a biosphere under various natural and manmade disruptive events affecting a nuclide release could be modeled and evaluated. To demonstrate its usability, three illustrative cases including the influence of a groundwater flow pattern through canisters associated with a flowing groundwater through fractures, and the possible disruptive events caused by an accidental human intrusion or an earthquake have been investigated and illustrated for a hypothetical Korean HLW repository

Uncertainty management in radioactive waste repository site assessment

International Nuclear Information System (INIS)

Baldwin, J.f.; Martin, T.P.; Tocatlidou

1994-01-01

The problem of performance assessment of a site to serve as a repository for the final disposal of radioactive waste involves different types of uncertainties. Their main sources include the large temporal and spatial considerations over which safety of the system has to be ensured, our inability to completely understand and describe a very complex structure such as the repository system, lack of precision in the measured information etc. These issues underlie most of the problems faced when rigid probabilistic approaches are used. Nevertheless a framework is needed, that would allow for an optimal aggregation of the available knowledge and an efficient management of the various types of uncertainty involved. In this work a knowledge-based modelling of the repository selection process is proposed that through a consequence analysis, evaluates the potential impact that hypothetical scenarios will have on a candidate site. The model is organised around a hierarchical structure, relating the scenarios with the possible events and processes that characterise them, and the site parameters. The scheme provides for both crisp and fuzzy parameter values and uses fuzzy semantic unification and evidential support logic reference mechanisms. It is implemented using the artificial intelligence language FRIL and the interaction with the user is performed through a windows interface

Assessment of effectiveness of geologic isolation systems. Test case release consequence analysis for a spent fuel repository in bedded salt

International Nuclear Information System (INIS)

Raymond, J.R.; Bond, F.W.; Cole, C.R.; Nelson, R.W.; Reisenauer, A.E.; Washburn, J.F.; Norman, N.A.; Mote, P.A.; Segol, G.

1980-01-01

Geologic and geohydrologic data for the Paradox Basin have been used to simulate movement of ground water and radioacrtive contaminants from a hypothetical nuclear reactor spent fuel repository after an assumed accidental release. The pathlines, travel times and velocity of the ground water from the repository to the discharge locale (river) were determined after the disruptive event by use of a two-dimensional finite difference hydrologic model. The concentration of radioactive contaminants in the ground water was calculated along a series of flow tubes by use of a one-dimensional mass transport model which takes into account convection, dispersion, contaminant/media interactions and radioactive decay. For the hypothetical site location and specific parameters used in this demonstration, it is found that Iodine-129 (I-129) is tthe only isotope reaching the Colorado River in significant concentration. This concentration occurs about 8.0 x 10 5 years after the repository has been breached. This I-129 ground-water concentration is about 0.3 of the drinking water standard for uncontrolled use. The groundwater concentration would then be diluted by the Colorado River. None of the actinide elements reach more than half the distance from the repository to the Colorado River in the two-million year model run time. This exercise demonstrates that the WISAP model system is applicable for analysis of contaminant transport. The results presented in this report, however, are valid only for one particular set of parameters. A complete sensitivity analysis must be performed to evaluate the range of effects from the release of contaminants from a breached repository

Scenarios for long-term release of radionuclides from a nuclear-waste repository in the Los Medanos region of New Mexico

International Nuclear Information System (INIS)

Bingham, F.W.; Barr, G.E.

1979-05-01

This report discusses hypothetical sequences of events that could conceivably release radionuclides from radioactive waste buried in the proposed WIPP repository. All the scenarios are described in terms specific to the WIPP site; they include only events whose occurrence is physically possible there. The report estimates the relative probabilities of the scenarios at times ranging from 1000 to 1 million years after the repository is sealed. Although none of the scenarios is judged likely, the report recommends several for detailed computer modeling and consequence analysis

Simulations of water and solute movement in the buried waste repository at Vaalputs

International Nuclear Information System (INIS)

Hutson, J.L.

1987-01-01

A previous series of simulations examined the movement of water through trench cap configurations of several types. The objectives of this series are i) to extent the simulations from the surface to the bottom of the repository, accounting for the placement of drums, ii) to examine the magnitude and direction of water fluxes throughout this depth and iii) to simulate the movement of solutes, using various assumptions regarding solute adsorption. Two models were used. The first was an adaptation of a solute transport model which incorporates the transient water flow model used in previous simulations. This was used primarily to estimate the likely water fluxes in the drum placement region. Since it requires large amounts of computer time this model was used to simulate periods of one or two years only. The second model was a very simple steady state solute transport model which was used to simulate Cs distribution after a 100 year period, using flux data obtained from the transient model simulations. The most important conclusion reached from this series of simulations is that the movement of Cs in the soil under the likely water regime is extremely slow. 'Worst case' situations were simulated. Some of these situations are unlikely in reality but provide a useful indication of the rates of movement of solute under various conditions. For this reason it was assumed that plants were absent in cases when maximum percolation was simulated and present when maximum upward flow was simulated. In no case was a 'wick' (a textural barrier to unsaturated water flow) assumed to be present

The separation of radionuclide migration by solution and particle transport in LLRW repository buffer material

International Nuclear Information System (INIS)

Torok, J.; Buckley, L.P.; Woods, B.L.

1989-01-01

Laboratory-scale lysimeter experiments were performed with simulated waste forms placed in candidate buffer materials which have been chosen for a low-level radioactive waste repository. Radionuclide releases into the effluent water and radionuclide capture by the buffer material were determined. The results could not be explained by traditional solution transport mechanisms, and transport by particles released from the waste form and/or transport by buffer particles were suspected as the dominant mechanism for radionuclide release from the lysimeters. To elucidate the relative contribution of particle and solution transport, the waste forms were replaced by a wafer of neutron-activated buffer soaked with selected soluble isotopes. Particle transport was determined by the movement of gamma-emitting neutron-activation products through the lysimeter. Solution transport was quantified by comparing the migration of soluble radionuclides relative to the transport of neutron activation products. The new approach for monitoring radionuclide migration in soil is presented. It facilitates the determination of most of the fundamental coefficients required to model the transport process

Transport and reaction kinetics at the glass:solution interface region: results of repository-oriented leaching experiments

International Nuclear Information System (INIS)

Abrajano, T.A. Jr.; Bates, J.K.

1987-01-01

Repository-oriented leaching experiments involving Savannah River Laboratory (SRL) 165 type glass under a γ-radiation field (1 +/- 0.2 x 10 4 R/h) have been performed by the Nevada Nuclear Waste Storage Investigations (NNWSI) project. In this communication, they discuss glass surface analyses obtained by SEM, nuclear resonance profiling, and SIMS together with leachate solution data in relation to a mechanism that couples diffusion, hydrolysis (etching and gelation), and precipitation to qualitatively describe the release of different glass components to the leachant solutions. The release of mobile (e.g., Li) and partly mobile (e.g., B) species is controlled primarily by interdiffusion with water species across the interdiffusion zone. Glass components that are immobile in the interdiffusion zone are released to the solution by etching. For prediction of long-term steady-state concentrations of glass components with low solubility, the relative rates of release from the glass and secondary mineral precipitation must be taken into account. 20 references, 5 figures, 1 table

Safety case for Slovenian LILW near-surface repository

International Nuclear Information System (INIS)

Viršek, Sandi; Špiler, Janja; Žagar, Tomaž

2016-01-01

Conclusions: • Repository provides the fulfillment of international and national legal requirements regarding treatment and disposal of LILW; • Repository improves the conditions for life extension for NPP Krško and offers synergetic effects for the second unit of NPP Krško; • Repository provides a basis for safe, economic and reliable use of radioactive sources in science, medicine and industry in Slovenia; • All economic calculations and comparisons show a clear advantage in case of a joint Slovenian and Croatian solution

Safety Assessment of a Hypothetical Near Surface Disposal at PPTN Serpong Site: Near-Field Modeling

International Nuclear Information System (INIS)

Lubis, Erwansyah

2000-01-01

The near field modeling of a hypothetical surface disposal at Serpong site has been performed. Considering a realistic downward water flux of 10 -1 0 m/s through the conditioned waste zone and the concrete barriers, transport of radionuclide by advection and dispersion below the bottom of the repository was calculated using PORFLOW computer code. The result shows that the highest fluxes were observed H-3, Cs-135, Nb-94 and Ni-59, all about 10 4 Bq/a/m 2 . Intermediate fluxes were obtained for Cs-137, I-129 and Co-60. Lowest were due to Ni-63 and C-14. The effect on radionuclide fluxes by having an unsaturated soil of 1.0-m depth below the bottom of the repository also was investigated. The results indicate that the highest fluxes are due to Cs-135, Nb-94 and Ni- 59, approximately 10 4 Bq/a/m 2 . The fluxes owing to H-3 has decreased to 10 -9 Bq/a/m 2 owing to decay. Radionuclides that are not absorbed onto lateritic clay soil, C-14 and I-129 are not decreased in flux. All other radionuclides has significantly smaller fluxes compared to the ones calculated at the bottom of the repository. This indicates that the lateric clay soil at Serpong site plays an important role in retarding and dispersing the radionuclide migration towards the ground water. (author)

Estimating the economic impact of a repository from scenario-based surveys: Models of the relation of stated intent to actual behavior

International Nuclear Information System (INIS)

Easterling, D.; Morwitz, V.; Kunreuther, H.

1990-12-01

The task of estimating the economic impact of a facility as novel and long-lived as a high-level nuclear waste (HLNW) repository is fraught with uncertainty. One approach to the forecasting problems is to survey economic agents as to how they would respond when confronted with hypothetical repository scenarios. A series of such studies conducted for the state of Nevada have examined the potential impact of a Yucca Mountain repository on behavior such as planning conventions, attending conventions, vacationing, outmigration, immigration, and business location. In each case, respondents drawn from a target population report on whether a particular repository event (either some form of an accident, or simply the presence of the facility) would cause them to act any differently than they otherwise would. The responses to such a survey provide an indication of whether or not economic behavior would be altered. However, the analysis is inevitably plagued with the question of how much credence to place in the reports of intended behavior; can we believe what people report they would do in a hypothetical situation? The present study examines a more precise version of this question regarding the validity of stated intent data. After reviewing a variety of literature in the area of intent versus actual behavior, we provide an answer to the question, ''What levels of actual behavior are consistent with the intent data that have been observed in the repository surveys?'' More formally, we assume that we are generally interested in predicting the proportion of a sample who will actually perform a target behavior. 86 refs., 6 figs., 9 tabs

The Ec prototype repository project: implications of assessments for refining repository design

International Nuclear Information System (INIS)

Svemar, C.

2004-01-01

The most important issue in the evaluation of the repository performance is the long term safety of the repository. Analyses for this issue focuses on the 'steady state' conditions which start at the time when the repository has been saturated and the groundwater table returned to its normal level. The bentonite buffer around the canisters is saturated and homogeneous, and the canister is located exactly in the centre of the buffer. The backfill in the tunnel has been saturated as well and fills the earlier open spaces in the tunnel completely. The task of the activities taking places prior to the start of the 'steady state' conditions, like excavation, deposition, backfilling and sealing, with due consideration to the processes a consequences they may cause in the long run, is to provide for these 'ideal' conditions, as close as possible. While studying these activities in detail it has become obvious that development of methods and techniques needs to be carefully addressed before the decision is made on how to apply them in the repository. One general finding is that the situation in engineering of details is not that much different from the situation in geological characterisation of a site in detail; one more detail of engineering and the consequences it brings often complicates the situation rather than supports the solution prioritized so far. Many of the practical issues have been studied in the Prototype Repository project in the AEspoe Hard Rock Laboratory (Pusch et al., 2000). The Prototype Repository consists of two sections with four respectively two deposition holes with bentonite buffer and canister, the latter holding electrical heaters. The sections are separated by a concrete plug, and the whole test is to be separated from the rest of the laboratory by an outer plug. The project has two objectives: 1. To demonstrate the integrated function of tile deep repository components under realistic conditions and to compare results with models and

Upgrading of radon's type near surface repository in Latvia

International Nuclear Information System (INIS)

Abramenkovs, A.

2006-01-01

In 1959, the Soviet government decided to construct the near surface radioactive wastes repository 'Radons' near the Baldone city. It was put in operation in 1962. The changes in the development of the repository were induced by the necessarily to upgrade it for disposal of radioactive wastes from the decommissioning of the Salaspils Research Reactor (SRR). The safety assessment of repository was performed during 2000-2001 under the PHARE project for necessary upgrades of repository. The outline design for new vaults and interim storage for long lived radioactive wastes was elaborated during 2003-2004 years. The Environmental Impact Assessment (EIA) for upgrade of Baldone repository was performed during 2004-2005 years. It was found, that additional efforts must be devoted for solution of social aspects o for successful operation and upgrade of repository. It was shown by EIA, that the local population has a negative opinion against the upgrade of repository in Latvia. The main recommendations for upgrades were connected with increasing the safety of repository, increasing of PR activities for education of society and developing of compensation mechanism for local municipality. (author)

Barriers to migration of radionuclides from radioactive waste repositories

International Nuclear Information System (INIS)

Stefanova, I.

1999-01-01

Natural inorganic sorbents are known as effective barriers that reduce the migration of radionuclides from radioactive waste repositories and contaminated sites. They could be used as buffer, backfill and sealing materials in the repository and their presence in the host rock and the surrounding geological formations increases the retention properties of the strata. Natural occurring minerals from local origin are used in the study - zeolites (clinoptilolite and mordenite), celadonite and loess. Sorption of wide range of radionuclides is studies. Batch capacity is determined. Sorption of radionuclides from simulated natural solution is studied. Distribution coefficients are calculated from sorption isotherms. Desorption in presence of different natural solutions is studied. Sorption properties are compared. It is shown that clinoptilolite acts as effective barrier against migration of radionuclides from repositories. The presence of celadonite in the clinoptilolite rock increases the retention of polyvalent ions. The retention of radionuclides on loess samples fulfils the requirements for host media for repository for low and intermediate level waste. A method for construction of additional barrier to the existing in the country disposal vault for spent sealed sources is proposed

Final repository search together with the citizens. Information, consultation, dialogue, participation

International Nuclear Information System (INIS)

Mueller, Monika C.M.

2013-01-01

The documentation on the Loccum meeting 2013 includes contributions on the following topics: Public participation for the final repository search; Lessons learned from the past; Public participation: what is expected? Experiences of repository operators on public participation; The TRIPLEX concept; From Gorleben to the law on final repository search: a long and a short story; Public participation concerning radioactive waste storage; The public has to be informed on the radioactive waste problem and the possible solutions; After consensus is before consensus - German final repository conflict between legislation and simulated public participation; Political concept of public participation; A fast final repository law will not bring about social peace; Good public participation on final repository search - requirements, challenges, questions and approaches.

Reconstruction and modernization of Novi Han radioactive waste repository

International Nuclear Information System (INIS)

Kolev, I.; Dralchev, D.; Spasov, P.; Jordanov, M.

2000-01-01

This report presents briefly the most important issues of the study performed by EQE - Bulgaria. The objectives of the study are the development of conceptual solutions for construction of the following facilities in the Novi Han radioactive waste repository: an operational storage for unconditioned high level spent sources; new temporary buildings over the existing radioactive waste storage facilities; a rain-water draining system ect. The study also includes the engineering solutions for conservation of the existing facilities, currently full with high level spent sources. A 'Program for reconstruction and modernization' has been created, including the analysis of some regulation aspects concerning this program implementation. In conclusions the engineering problems of Novi Han repository are clear and appropriate solutions are available. They can be implemented in both cases of 'small' or 'large' reconstruction. The reconstruction project anyway should start with the construction of a new site infrastructure. Reconstruction and modernization of Novi Han radioactive waste repository is the only way to improve the management and safety of radioactive waste from medicine, industry and scientific research in Bulgaria

AEGIS technology demonstration for a nuclear waste repository in basalt. Assessment of effectiveness of geologic isolation systems

International Nuclear Information System (INIS)

Dove, F.H.; Cole, C.R.; Foley, M.G.

1982-09-01

A technology demonstration of current performance assessment techniques as applied to a nuclear waste repository in the Columbia Plateau Basalts was conducted. Hypothetical repository coordinates were selected for an actual geographical setting on the Hanford Reservation in the state of Washington. Published hydrologic and geologic data used in the analyses were gathered in 1979 or earlier. The following report documents the technology demonstration in basalt. Available information has been used to establish the data base and initial hydrologic and geologic interpretations for this site-specific application. A simplified diagram of the AEGIS analyses is shown. Because an understanding of the dynamics of ground-water flow is essential to the development of release scenarios and consequence analyses, a key step in the demonstration is the systems characterization contained in the conceptual model. Regional and local ground-water movement patterns have been defined with the aid of hydrologic computer models. Hypothetical release scenarios have been developed and evaluated by a process involving expert opinion and a Geologic Simulation Model for basalt. (The Geologic Simulation Model can also be used to forecast future boundary conditions for the hydrologic simulation.) Chemical reactivity of the basalt with ground water will influence the leaching and transport of radionuclides; solubility equilibria based on available data are estimated with geochemical models. After the radionuclide concentrations are mathematically introduced into the ground-water movement patterns, waste movement patterns are outlined over elapsed time. Contaminant transport results are summarized for significant radionuclides that are hypothetically released to the accessible environment and to the biosphere

AEGIS technology demonstration for a nuclear waste repository in basalt. Assessment of effectiveness of geologic isolation systems

Energy Technology Data Exchange (ETDEWEB)

Dove, F.H.; Cole, C.R.; Foley, M.G.

1982-09-01

A technology demonstration of current performance assessment techniques as applied to a nuclear waste repository in the Columbia Plateau Basalts was conducted. Hypothetical repository coordinates were selected for an actual geographical setting on the Hanford Reservation in the state of Washington. Published hydrologic and geologic data used in the analyses were gathered in 1979 or earlier. The following report documents the technology demonstration in basalt. Available information has been used to establish the data base and initial hydrologic and geologic interpretations for this site-specific application. A simplified diagram of the AEGIS analyses is shown. Because an understanding of the dynamics of ground-water flow is essential to the development of release scenarios and consequence analyses, a key step in the demonstration is the systems characterization contained in the conceptual model. Regional and local ground-water movement patterns have been defined with the aid of hydrologic computer models. Hypothetical release scenarios have been developed and evaluated by a process involving expert opinion and a Geologic Simulation Model for basalt. (The Geologic Simulation Model can also be used to forecast future boundary conditions for the hydrologic simulation.) Chemical reactivity of the basalt with ground water will influence the leaching and transport of radionuclides; solubility equilibria based on available data are estimated with geochemical models. After the radionuclide concentrations are mathematically introduced into the ground-water movement patterns, waste movement patterns are outlined over elapsed time. Contaminant transport results are summarized for significant radionuclides that are hypothetically released to the accessible environment and to the biosphere.

A comparison of risks due to HLW and SURF repositories in bedded salt

International Nuclear Information System (INIS)

Chu, M.S.Y.; Ortiz, N.R.; Wahi, K.K.

1983-01-01

A methodology was developed to analyze risks from geologic disposal of nuclear wastes. It was applied to estimate the risk due to spent fuel and high-level waste hypothetical repositories in bedded salt. A number of disruptive scenarios were analyzed for each waste type. A comparison between the spent fuel and high-level waste results is presented. The methodology enables one to identify important radionuclides, parameters, and scenarios in terms of their relative contribution to the overall risk or compliance with the proposed EPA Standard

Application of a safety assessment methodology to a hypothetical surface disposal at Serpong site, Indonesia

International Nuclear Information System (INIS)

Lubis, E.; Mallants, D.; Volckaert, G.; Marivoet, J.; Neerdael, B.

2000-01-01

A preliminary and generic safety assessment of a candidate shallow land burial (SLB) repository at Serpong site, Indonesia, has been performed. The step-by-step safety assessment methodology included an analysis of features, events, and processes (FEPs), and mathematical modelling of radionuclide migration in the near field, geosphere and biosphere. On the basis of an extensive FEP catalogue the most relevant scenarios to be considered in the consequence analysis were selected. Both the normal evolution scenario (NES) and the alternative scenarios were identified. On the basis of these scenarios a conceptual model that included all the important physical-chemical processes was built for the near field and geosphere. A two-dimensional numerical model was then used to solve the governing flow and transport equations for appropriate initial and boundary conditions. The calculations were performed using a repository-specific value for the total disposed activity in combination with hypothetical values for radionuclide composition based on a typical radionuclide content of low level waste in Belgium. Site-specific data on hydrogeological properties were used for the geosphere calculations. Typical results of the consequence analysis in terms of radionuclide fluxes to the geosphere and radionuclide concentrations in the groundwater are discussed. (author)

Solute transport in fractured rock - applications to radionuclide waste repositories

International Nuclear Information System (INIS)

Neretnieks, I.

1990-12-01

Flow and solute transport in fractured rocks has been intensively studied in the last decade. The increased interest is mainly due to the plans in many countries to site repositories for high level nuclear waste in deep geologic formations. All investigated crystalline rocks have been found to be fractured and most of the water flows in the fractures and fracture zones. The water transports dissolved species and radionuclides. It is thus of interest to be able to understand and to do predictive modelling of the flowrate of water, the flowpaths and the residence times of the water and of the nuclides. The dissolved species including the nuclides will interact with the surrounding rock in different ways and will in many cases be strongly retarded relative to the water velocity. Ionic species may be ion exchanged or sorbed in the mineral surfaces. Charges and neutral species may diffuse into the stagnant waters in the rock matrix and thus be withdrawn from the mobile water. These effects will be strongly dependent on how much rock surface is in contact with the flowing water. It has been found in a set of field experiments and by other observations that not all fractures conduct water. Furthermore it is found that conductive fractures only conduct the water in a small part of the fracture in what is called channels or preferential flowpaths. This report summarizes the present concepts of water flow and solute transport in fractured rocks. The data needs for predictive modelling are discussed and both field and laboratory measurement which have been used to obtain data are described. Several large scale field experiments which have been specially designed to study flow and tracer transport in crystalline rocks are described. In many of the field experients new techniques have been developed and used. (81 refs.) (author)

Assessment of disruptive scenarios of a Canadian used fuel repository in crystalline rock

Energy Technology Data Exchange (ETDEWEB)

Gobien, M.; Garisto, F.; Hunt, N.; Kremer, E.P. [Nuclear Waste Management Organization (NWMO), Toronto, Ontario (Canada)

2015-06-15

The NWMO has recently extended its modelling capabilities by performing simulations for four disruptive scenarios that, to date, have not yet been examined in detail. These scenarios complement those considered in an existing postclosure safety assessment for a conceptual geological repository located in a hypothetical crystalline rock formation. The four new disruptive scenarios are: Shaft Seal Failure, Undetected Fault, Open or Poorly Sealed Borehole and Open Borehole Due to Inadvertent Human Intrusion. All simulations are based on the FRAC3DVS-OPG Site-Scale Model. The Site-Scale Model includes a simplified representation of the full repository and a portion of the surrounding sub-regional flow system. All transport simulations are performed with only the radionuclide I-129. Transport rates to the surface and a domestic water supply well are compared to the Reference Case results from an earlier case study documented in Reference. (author)

Assessment of disruptive scenarios of a Canadian used fuel repository in crystalline rock

Energy Technology Data Exchange (ETDEWEB)

Gobien, M.; Garisto, F.; Hunt, N.; Kremer, E.P., E-mail: mgobien@nwmo.ca [Nuclear Waste Management Organization, Toronto, ON (Canada)

2015-07-01

The NWMO has recently extended its modelling capabilities by performing simulations for four disruptive scenarios that, to date, have not yet been examined in detail. These scenarios complement those considered in an existing postclosure safety assessment for a conceptual geological repository located in a hypothetical crystalline rock formation. The four new disruptive scenarios are: Shaft Seal Failure, Undetected Fault, Open or Poorly Sealed Borehole and Open Borehole Due to Inadvertent Human Intrusion. All simulations are based on the FRAC3DVS-OPG [1] Site-Scale Model [2]. The Site-Scale Model includes a simplified representation of the full repository and a portion of the surrounding sub-regional flow system. All transport simulations are performed with only the radionuclide I-129. Transport rates to the surface and a domestic water supply well are compared to the Reference Case results from an earlier case study documented in Reference [2]. (author)

Assessment of disruptive scenarios of a Canadian used fuel repository in crystalline rock

International Nuclear Information System (INIS)

Gobien, M.; Garisto, F.; Hunt, N.; Kremer, E.P.

2015-01-01

The NWMO has recently extended its modelling capabilities by performing simulations for four disruptive scenarios that, to date, have not yet been examined in detail. These scenarios complement those considered in an existing postclosure safety assessment for a conceptual geological repository located in a hypothetical crystalline rock formation. The four new disruptive scenarios are: Shaft Seal Failure, Undetected Fault, Open or Poorly Sealed Borehole and Open Borehole Due to Inadvertent Human Intrusion. All simulations are based on the FRAC3DVS-OPG [1] Site-Scale Model [2]. The Site-Scale Model includes a simplified representation of the full repository and a portion of the surrounding sub-regional flow system. All transport simulations are performed with only the radionuclide I-129. Transport rates to the surface and a domestic water supply well are compared to the Reference Case results from an earlier case study documented in Reference [2]. (author)

The Yucca Mountain Repository - Too Little, Too Late

International Nuclear Information System (INIS)

Eriksson, L.G.; Pentz, D.L.

2009-01-01

In 2008, the U.S. Department of Energy (US DOE) announced that the nation's first (and only pursued) deep geological disposal system (repository) for 70,000 metric tonnes of spent nuclear fuel (SNF) and other high-level radioactive waste (HLW) at the Yucca Mountain (YM) site in Nevada would: 1. Not be able to accommodate the projected stockpile of utility-generated SNF beyond 2010. 2. Open no earlier than in 2020, i.e., more than 22 years behind the statutory-mandated opening date. In the meantime, the US DOE is legally obligated to compensate the utilities from January 31, 1998, until it takes title to the utilities' SNF. In 2005 when the YM SNF repository was projected to open in 2010, the utilities estimated that, depending upon how close to 2010 the YM repository opened, the 'breach-of-contract' compensation could be in the range of between 100 billion and 300 billion U.S. dollars ($300 B), which would exceed the 2008 projected life-cycle cost of $96 B for the YM repository. It thus seems appropriate to look beyond the YM repository and call upon the U.S. Congress to promptly act and open new avenues allowing the US DOE to more timely and cost-effectively take title to both existing and pending SNF the current fleet of 104 reactors will generate through the next 60 years. Options for SNF arising from an additional 50 reactors should also be provided. Based on our more than 60 years of combined involvement in nuclear waste management in the USA and abroad, we submit the following industrial-scale-proven, repository-related, nuclear-waste-management and disposition solutions for prompt Congressional consideration and action: 1. An increase in the disposal capacity (and perhaps mission) of the YM repository. 2. Prompt establishment of at least one large federal monitored retrievable storage (MRS) facility for utility-generated SNF. 3. Continued research in reprocessing options of existing and pending SNF with defined milestones. 4. Resurrection of a second

Deep repository for long-lived low- and intermediate-level waste. Preliminary safety assessment

International Nuclear Information System (INIS)

1999-11-01

A preliminary safety assessment has been performed of a deep repository for long-lived low- and intermediate-level waste, SFL 3-5. The purpose of the study is to investigate the capacity of the facility to act as a barrier to the release of radionuclides and toxic pollutants, and to shed light on the importance of the location of the repository site. A safety assessment (SR 97) of a deep repository for spent fuel has been carried out at the same time. In SR 97, three hypothetical repository sites have been selected for study. These sites exhibit fairly different conditions in terms of hydrogeology, hydrochemistry and ecosystems. To make use of information and data from the SR 97 study, we have assumed that SFL 3-5 is co-sited with the deep repository for spent fuel. A conceivable alternative is to site SFL 3-5 as a completely separate repository. The focus of the SFL 3-5 study is a quantitative analysis of the environmental impact for a reference scenario, while other scenarios are discussed and analyzed in more general terms. Migration in the repository's near- and far-field has been taken into account in the reference scenario. Environmental impact on the three sites has also been calculated. The calculations are based on an updated forecast of the waste to be disposed of in SFL 3-5. The forecast includes radionuclide content, toxic metals and other substances that have a bearing on a safety assessment. The safety assessment shows how important the site is for safety. Two factors stand out as being particularly important: the water flow at the depth in the rock where the repository is built, and the ecosystem in the areas on the ground surface where releases may take place in the future. Another conclusion is that radionuclides that are highly mobile and long-lived, such as 36 Cl and 93 Mo , are important to take into consideration. Their being long-lived means that barriers and the ecosystems must be regarded with a very long time horizon

Important radionuclides and their sensitivity for groundwater pathway of a hypothetical near-surface disposal facility

Energy Technology Data Exchange (ETDEWEB)

Park, J. W.; Chang, K.; Kim, C. L. [Nuclear Enviroment Technology Institute, Taejon (Korea, Republic of)

2001-04-01

A radiological safety assessment was performed for a hypothetical near-surface radioactive waste repository as a simple screening calculation to identify important nuclides and to provide insights on the data needs for a successful demonstration of compliance. Individual effective doses were calculated for a conservative groundwater pathway scenario considering well drilling near the site boundary. Sensitivity of resulting ingestion dose to input parameter values was also analyzed using Monte Carlo sampling. Considering peak dose rate and assessment timescale, C-14 and I-129 were identified as important nuclides and U-235 and U-238 as potentially important nuclides. For C-14, the does was most sensitive to Darcy velocity in aquifer. The distribution coefficient showed high degree of sensitivity for I-129 release.

Important radionuclides and their sensitivity for groundwater pathway of a hypothetical near-surface disposal facility

International Nuclear Information System (INIS)

Park, J. W.; Chang, K.; Kim, C. L.

2001-01-01

A radiological safety assessment was performed for a hypothetical near-surface radioactive waste repository as a simple screening calculation to identify important nuclides and to provide insights on the data needs for a successful demonstration of compliance. Individual effective doses were calculated for a conservative groundwater pathway scenario considering well drilling near the site boundary. Sensitivity of resulting ingestion dose to input parameter values was also analyzed using Monte Carlo sampling. Considering peak dose rate and assessment timescale, C-14 and I-129 were identified as important nuclides and U-235 and U-238 as potentially important nuclides. For C-14, the does was most sensitive to Darcy velocity in aquifer. The distribution coefficient showed high degree of sensitivity for I-129 release

2nd Essen specialized discussions about repository mining

International Nuclear Information System (INIS)

Reinartz, Jerome

2013-01-01

The final storage of nuclear waste in Germany right now is more a political and societal than technical process. To promote the exchange of experience in the sophisticated field of mining technology, and put the focus back on finding a repository solution, the DMT in cooperation with GNS and DBE Technology initiated the Essen Specialized Discussions about Repository Mining. On February 28, more than 120 participants sought information about recent developments, exchanged experience, and maintained contacts. (orig.)

NPP Krsko: LILW Repository or Long Term Storage

International Nuclear Information System (INIS)

Lokner, V.; Subasic, D.; Levanat, I.

2008-01-01

Construction of the facilities for LILW and SF management, as planned in Decommissioning and LILW and SF management program for NPP Krsko, would be a rather expensive and challenging project for such a small nuclear program. In order to accommodate waste arising from a single nuclear power plant, one LILW repository should be constructed before the end of the NPP operation, then one SF dry storage, and finally one geological repository. This requires relatively urgent identification within Slovenian/Croatian territory of three locations that meet the criteria for establishment of such facilities and are acceptable to the local communities. There are very few such potential locations. The siting process for the first of the three facilities is well under way in Slovenia, because the country wants to have its LILW repository in operation by the year 2013. In order to facilitate public acceptance, Slovenian government has introduced financial incentives to local communities for the repository construction and operation. These 'compensations for limited land use' may significantly increase the overall costs of disposal if the repository is in operation for a long period. In the recent years, however, a possibility of long term storage (LTS) is gaining an increased attention in the waste management community, and has already been introduced e.g. in the Netherlands. It is a particularly viable option for limited waste quantities. Disposal remains the final solution, but present technologies have made possible a relatively inexpensive storage up to about hundred years, which can accommodate LILW, HLW and SF from nuclear programs as well as research reactor waste and NORM. Such storage would be a safe and simple temporary solution, encompassing all immediate and near future waste management needs. In addition, it would increase flexibility and reduce financing requirements for the final waste disposal: providing additional time for reduction of radiation emission and heat

Uncertainty analysis of multiple canister repository model by large-scale calculation

International Nuclear Information System (INIS)

Tsujimoto, K.; Okuda, H.; Ahn, J.

2007-01-01

A prototype uncertainty analysis has been made by using the multiple-canister radionuclide transport code, VR, for performance assessment for the high-level radioactive waste repository. Fractures in the host rock determine main conduit of groundwater, and thus significantly affect the magnitude of radionuclide release rates from the repository. In this study, the probability distribution function (PDF) for the number of connected canisters in the same fracture cluster that bears water flow has been determined in a Monte-Carlo fashion by running the FFDF code with assumed PDFs for fracture geometry. The uncertainty for the release rate of 237 Np from a hypothetical repository containing 100 canisters has been quantitatively evaluated by using the VR code with PDFs for the number of connected canisters and the near field rock porosity. The calculation results show that the mass transport is greatly affected by (1) the magnitude of the radionuclide source determined by the number of connected canisters by the fracture cluster, and (2) the canister concentration effect in the same fracture network. The results also show the two conflicting tendencies that the more fractures in the repository model space, the greater average value but the smaller uncertainty of the peak fractional release rate is. To perform a vast amount of calculation, we have utilized the Earth Simulator and SR8000. The multi-level hybrid programming method is applied in the optimization to exploit high performance of the Earth Simulator. The Latin Hypercube Sampling has been utilized to reduce the number of samplings in Monte-Carlo calculation. (authors)

Investigation of excavation stability in a finite repository

International Nuclear Information System (INIS)

St John, C.M.; Mitchell, S.J.

1987-05-01

Two-dimensional thermal-mechanical analyses of a hypothetical repository in tuff were performed using a boundary-element computer code, with the objective of investigating the relative stability of several waste emplacement panel access drifts. The drifts were assumed to be located within a central shaft pillar, within a small pillar between adjacent panels, or at the repository perimeter. The results of analyses indicate that matrix failure is unlikely and that the extent of activation of pre-existing joints is influenced by the drift location and the initial state of stress. The results also show that several years after waste emplacement the influence of the initial State of Stress is small compared to the influence of thermally induced stresses. Regions of joint activation are seen to be most extensive around the drifts between adjacent panels. The predicted extent of such activation was small when it was assumed that the joints were vertical or near vertical. More extensive regions of activation of shallow dipping joints were noted. However, joints of such orientation are believed to occur relatively infrequently in the candidate horizon for waste emplacement and the activation of the shallow dipping joints does not necessarily lead to drift stability concerns. 3 refs., 24 figs., 7 tabs

Planning and Design Considerations for Geological Repository Programmes of Radioactive Waste

International Nuclear Information System (INIS)

2014-11-01

Disposal in a geological repository is the generally accepted solution for the long term management of high level and/or long lived radioactive wastes, in line with the general principles defined in the IAEA Safety Fundamentals. This publication presents practical information on the way a geological repository programme for radioactive waste could be defined and planned, with special attention to all aspects having an impact on the timing. Country specific examples for repository development phases are provided, based on actual experiences from Member States

Federated repositories of X-ray diffraction images.

Science.gov (United States)

Androulakis, Steve; Schmidberger, Jason; Bate, Mark A; DeGori, Ross; Beitz, Anthony; Keong, Cyrus; Cameron, Bob; McGowan, Sheena; Porter, Corrine J; Harrison, Andrew; Hunter, Jane; Martin, Jennifer L; Kobe, Bostjan; Dobson, Renwick C J; Parker, Michael W; Whisstock, James C; Gray, Joan; Treloar, Andrew; Groenewegen, David; Dickson, Neil; Buckle, Ashley M

2008-07-01

There is a pressing need for the archiving and curation of raw X-ray diffraction data. This information is critical for validation, methods development and improvement of archived structures. However, the relatively large size of these data sets has presented challenges for storage in a single worldwide repository such as the Protein Data Bank archive. This problem can be avoided by using a federated approach, where each institution utilizes its institutional repository for storage, with a discovery service overlaid. Institutional repositories are relatively stable and adequately funded, ensuring persistence. Here, a simple repository solution is described, utilizing Fedora open-source database software and data-annotation and deposition tools that can be deployed at any site cheaply and easily. Data sets and associated metadata from federated repositories are given a unique and persistent handle, providing a simple mechanism for search and retrieval via web interfaces. In addition to ensuring that valuable data is not lost, the provision of raw data has several uses for the crystallographic community. Most importantly, structure determination can only be truly repeated or verified when the raw data are available. Moreover, the availability of raw data is extremely useful for the development of improved methods of image analysis and data processing.

Postclosure safety assessment of a deep geological repository for Canada's used nuclear fuel

Energy Technology Data Exchange (ETDEWEB)

Hunt, N.G.; Kremer, E.P.; Garisto, F.; Gierszewski, P.; Gobien, M.; Medri, C.L.D. [Nuclear Waste Management Organization, Toronto, ON (Canada); Avis, J.D. [Geofirma Engineering Ltd., Ottawa, ON (Canada); Chshyolkova, T.; Kitson, C.I.; Melnyk, W.; Wojciechowski, L.C. [Atomic Energy of Canada Limited, Pinawa, MB (Canada)

2011-07-01

This paper reports on elements of a postclosure safety assessment performed for a conceptual design and hypothetical site for a deep geological repository for Canada's used nuclear fuel. Key features are the assumption of a copper used fuel container with a steel inner vessel, container placement in vertical in-floor boreholes, a repository depth of 500 m, and a sparsely fractured crystalline rock geosphere. The study considers a Normal Evolution Scenario together with a series of Disruptive Event Scenarios. The Normal Evolution Scenario is a reasonable extrapolation of present day site features and receptor lifestyles, while the Disruptive Event Scenarios examine abnormal and unlikely failures of the containment and isolation systems. Both deterministic and probabilistic simulations were performed. The results show the peak dose consequences occur far in the future and are well below the applicable regulatory acceptance criteria and the natural background levels. (author)

Deep repository for long-lived low- and intermediate-level waste. Preliminary safety assessment

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-11-01

A preliminary safety assessment has been performed of a deep repository for long-lived low- and intermediate-level waste, SFL 3-5. The purpose of the study is to investigate the capacity of the facility to act as a barrier to the release of radionuclides and toxic pollutants, and to shed light on the importance of the location of the repository site. A safety assessment (SR 97) of a deep repository for spent fuel has been carried out at the same time. In SR 97, three hypothetical repository sites have been selected for study. These sites exhibit fairly different conditions in terms of hydrogeology, hydrochemistry and ecosystems. To make use of information and data from the SR 97 study, we have assumed that SFL 3-5 is co-sited with the deep repository for spent fuel. A conceivable alternative is to site SFL 3-5 as a completely separate repository. The focus of the SFL 3-5 study is a quantitative analysis of the environmental impact for a reference scenario, while other scenarios are discussed and analyzed in more general terms. Migration in the repository's near- and far-field has been taken into account in the reference scenario. Environmental impact on the three sites has also been calculated. The calculations are based on an updated forecast of the waste to be disposed of in SFL 3-5. The forecast includes radionuclide content, toxic metals and other substances that have a bearing on a safety assessment. The safety assessment shows how important the site is for safety. Two factors stand out as being particularly important: the water flow at the depth in the rock where the repository is built, and the ecosystem in the areas on the ground surface where releases may take place in the future. Another conclusion is that radionuclides that are highly mobile and long-lived, such as {sup 36}Cl and {sup 93}Mo , are important to take into consideration. Their being long-lived means that barriers and the ecosystems must be regarded with a very long time horizon.

Stress-corrosion-cracking studies on candidate container alloys for the Tuff Repository

International Nuclear Information System (INIS)

Beavers, J.A.; Durr, C.L.

1992-05-01

Cortest Columbus Technologies, Inc. (CC Technologies) investigated the long-term performance of container materials used for high-level waste package as part of the information needed by the Nuclear Regulatory Commission (NRC) to assess the Department of Energy's application to construct to geologic repository for high-level radioactive waste. At the direction of the NRC, the program focused on the Tuff Repository. This report summarizes the results of Stress-Corrosion-Cracking (SCC) studies performed in Tasks 3, 5, and 7 of the program. Two test techniques were used; U-bend exposures and Slow-Strain-Rate (SSR) tests. The testing was performed on two copper-base alloys (Alloy CDA 102 and Alloy CDA 175) and two Fe-Cr-Ni alloys (Alloy 304L and Alloy 825) in simulated J-13 groundwater and other simulated solutions for the Tuff Repository. These solutions were designed to simulate the effects of concentration and irradiation on the groundwater composition. All SCC testing on the Fe-Cr-Ni Alloys was performed on solution-annealed specimens and thus issues such as the effect of sensitization on SCC were not addressed

Technical realization of a closure concept for a chamber-system in the underground Richard repository in the Czech Republic

International Nuclear Information System (INIS)

Kucerka, Miroslav

2006-01-01

The Phare project CZ 632.02.04 'Realization of closure of a chamber in the Richard repository as input for establishing a safety case' is a follow up implementation phase of the Phare project, CZ 01.14.03 'Solution for closure of a chamber in the Richard repository'. Main objective of both projects is to propose and realize a disposal system in selected chambers of the Richard repository, which will eliminate burden from the past practices in waste management during the first phase of the Richard repository operation (1965 - 1980) and which will improve its overall long term safety. This objective will be assured by realization of the concept of so called 'hydraulic cage', which technical solution was developed by DBE Technology within the Phare project CZ 01.14.03. The solution is described in the previous presentation 'Hydraulic Cage Concept for Waste Chambers and its Technical Implementation for the Underground Richard Repository, Litomerice, Czech Republic'. (author)

An approach to improve Romanian geological repository planning

International Nuclear Information System (INIS)

Andrei, Veronica; Prisecaru, Ilie

2016-01-01

International standards recommend typical phases to be included within any national program for the development of a geological repository dedicated to disposal of the high level radioactive wastes generated in countries using nuclear power. However, these are not universally applicable and the content of each of these phases may need to be adapted for each national situation and regulatory and institutional framework. Several national geological repository programs have faced failures in schedules and have revised their programs to consider an adapted phased management approach. The authors have observed that in the case of those countries in the early phases of a geological repository program where boundary conditions have not been fully defined, international recommendations for handling delays/failures in the national program might not immediately help. This paper considers a case study of the influences of the national context risks on the current planning schedule of the Romanian national geological repository. It proposes an optimum solution for an integrated response to any significant adverse impact arising from these risks, enabling sustainable program planning

The recharge area concept: A strategy for siting nuclear waste repositories

International Nuclear Information System (INIS)

Sheng, G.; Toth, J.

2000-01-01

The Recharge Area Concept is the proposition that in Canadian-Shield type natural environments recharge areas of regional groundwater flow systems are superior for high-level nuclear waste repositories to other types of groundwater flow regimes, especially to areas of groundwater discharge. This conclusion is reached from an analysis of basinal groundwater flow models. The calculations were made for a two-dimensional flank of a fully saturated topographic basin, 20 km long and 4 km deep, in which groundwater is driven by gravity. Variants of hydraulic-conductivity distributions were considered: 1) homogeneous; 2) stratified; and 3) stratified-faulted. The faults attitudes were changed by steps from vertical to horizontal for different variants. The model is assumed conceptually to represent the crystalline-rock environment of the Canadian Shield. The hydrogeologic performances of hypothetical repositories placed 500 m deep in the recharge and discharge areas were characterized by thirteen parameters. The principal advantages of recharge- over discharge-area locations are: 1) longer travel paths and return-flow times from repository to surface; 2) robustness of predicted values of performance parameters; 3) field-verifiability of favourable hydrogeologic conditions (amounting to an implicit validation of the calculated minimum values of return-flow times); 4) site acceptance based on quantifiable and observable flow-controlling parameters; and 5) simple logistics and favourable economics of site selection and screening. As a by-product of modeling, it is demonstrated that the presence of old water is not an indication of stagnancy. (author)

Implementing digital preservation in repositories: Knowledge and practices

Directory of Open Access Journals (Sweden)

Caterina Groposo Pavão

2016-09-01

Full Text Available Digital preservation has to be undertaken by institutional repositories, which are responsible for the preservation of the scientific output from academic institutions. However, due to the constant evolution of the field, to gain domain knowledge and recognise best practices is a complex task for people responsible for digital preservation in those institutions. Digital preservation research, practices and solutions address specific problems, such as formats, curation, reference models, authenticity, policies and preservation plans, tools, etc., while stakeholders need an integrated, contextualized and applicable overview. This paper focuses on the implementation of digital preservation in repositories, from the perspective of the team responsible for the project, regarding the necessary knowledge and best practices. Initially, it defines and contextualizes digital preservation repositories. The following section presents a conceptual model of digital preservation, synthesized from conceptual models developed in influential projects in the field, which allows us to identify the domain knowledge in digital preservation. Finally, aspects represented in the model are discussed in the light of the performance of teams implementing digital preservation repositories. It provides recommendations, guides and examples that may be useful for the implementation of digital preservation. It points to the need to strengthen the relationship between domain knowledge in digital preservation repositories with practices developed in numerous projects developed worldwide.

Distributed Repositories for Educational Content - Part 1: Information Management for Educational Content

Directory of Open Access Journals (Sweden)

Bernd J. Krämer

2011-07-01

Full Text Available As education providers increasingly integrate digital learning media into their education processes, the need for the systematic management of learning materials and learning arrangements becomes clearer. Digital repositories, often called Learning Object Repositories (LOR, promise to provide an answer to this challenge. This article is composed of two parts. In this part, we derive technological and pedagogical requirements for LORs from a concretization of information quality criteria for e-learning technology. We review the evolution of learning object repositories and discuss their core features in the context of pedagogical requirements, information quality demands, and e-learning technology standards. We conclude with an outlook in Part 2, which presents concrete technical solutions, in particular networked repository architectures.

Distributed Repositories for Educational Content - Part 2: Technology

Directory of Open Access Journals (Sweden)

Christian Lukaschik

2011-07-01

Full Text Available In Part 1 of this article we discussed the need for information quality and the systematic management of learning materials and learning arrangements. Digital repositories, often called Learning Object Repositories (LOR, were introduced as a promising answer to this challenge. We also derived technological and pedagogical requirements for LORs from a concretization of information quality criteria for e-learning technology. This second part presents technical solutions that particularly address the demands of open education movements, which aspire to a global reuse and sharing culture. From this viewpoint, we develop core requirements for scalable network architectures for educational content management. We then present edu-sharing, an advanced example of a network of homogeneous repositories for learning resources, and discuss related technology. We conclude with an outlook in terms of emerging developments towards open and networked system architectures in e-learning.

Numerical modeling of gas migration at a proposed repository for low and intermediate level nuclear wastes at Oberbauenstock, Switzerland

International Nuclear Information System (INIS)

Pruess, K.

1990-03-01

Hydrologic impacts of corrosive gas release from a hypothetical L/ILW nuclear waste repository at Oberbauenstock are explored by means of numerical simulation. A schematic two dimensional vertical section through the mountain is modeled with the simulator TOUGH, which describes two-phase flow of water and gas in porous and fractured media. Two reference cases are considered which represent the formations as a porous and as a fractured-porous (dual permeability) medium, respectively. Both cases predict similar and rather modest pressure increases, from ambient 10 bars to near 25 bars at the repository level. These results are to be considered preliminary because important parameters affecting two-phase flow, such as relative permeabilities of a fractured medium, are not well known at present. 24 refs., 15 figs., 5 tabs

Parents' Aggressive Influences and Children's Aggressive Problem Solutions with Peers

Science.gov (United States)

Duman, Sarah; Margolin, Gayla

2007-01-01

This study examined children's aggressive and assertive solutions to hypothetical peer scenarios in relation to parents' responses to similar hypothetical social scenarios and parents' actual marital aggression. The study included 118 children ages 9 to 10 years old and their mothers and fathers. Children's aggressive solutions correlated with…

Reference design description for a geologic repository: Revision 01

International Nuclear Information System (INIS)

1997-09-01

This document describes the current design expectations for a potential geologic repository that could be located at Yucca Mountain in Nevada. This Reference Design Description (RDD) looks at the surface and subsurface repository and disposal container design. Additionally, it reviews the expected long-term performance of the potential repository. In accordance with current legislation, the reference design for the potential repository does not include an interim storage option. The reference design presented allows the disposal of highly radioactive material received from government-owned spent fuel custodian sites; produces high-level waste sites, and commercial spent fuel sites. All design elements meet current federal, state, and local regulations governing the disposal of high-level radioactive waste and protection of the public and the environment. Due to the complex nature of developing a repository, the design will be created in three phases to support Viability Assessment, License Application, and construction. This document presents the current reference design. It will be updated periodically as the design progresses. Some of the details presented here may change significantly as more cost-effective solutions, technical advancements, or changes to requirements are identified

In Silico screening for functional candidates amongst hypothetical proteins

Directory of Open Access Journals (Sweden)

Sanderhoff May

2009-09-01

Full Text Available Abstract Background The definition of a hypothetical protein is a protein that is predicted to be expressed from an open reading frame, but for which there is no experimental evidence of translation. Hypothetical proteins constitute a substantial fraction of proteomes of human as well as of other eukaryotes. With the general belief that the majority of hypothetical proteins are the product of pseudogenes, it is essential to have a tool with the ability of pinpointing the minority of hypothetical proteins with a high probability of being expressed. Results Here, we present an in silico selection strategy where eukaryotic hypothetical proteins are sorted according to two criteria that can be reliably identified in silico: the presence of subcellular targeting signals and presence of characterized protein domains. To validate the selection strategy we applied it on a database of human hypothetical proteins dating to 2006 and compared the proteins predicted to be expressed by our selecting strategy, with their status in 2008. For the comparison we focused on mitochondrial proteins, since considerable amounts of research have focused on this field in between 2006 and 2008. Therefore, many proteins, defined as hypothetical in 2006, have later been characterized as mitochondrial. Conclusion Among the total amount of human proteins hypothetical in 2006, 21% have later been experimentally characterized and 6% of those have been shown to have a role in a mitochondrial context. In contrast, among the selected hypothetical proteins from the 2006 dataset, predicted by our strategy to have a mitochondrial role, 53-62% have later been experimentally characterized, and 85% of these have actually been assigned a role in mitochondria by 2008. Therefore our in silico selection strategy can be used to select the most promising candidates for subsequent in vitro and in vivo analyses.

Sorption of plutonium and americium on repository, backfill and geological materials relevant to the JNFL low-level radioactive waste repository at Rokkasho-Mura

International Nuclear Information System (INIS)

Baston, G.M.N.; Berry, J.A.; Brownsword, M.; Heath, T.G.; Tweed, C.J.; Williams, S.J.

1995-01-01

An integrated program of batch sorption experiments and mathematical modeling has been carried out to study the sorption of plutonium and americium on a series of repository, backfill and geological materials relevant to the JNFL low-level radioactive waste repository at Rokkasho-Mura. The sorption of plutonium and americium on samples of concrete, mortar, sand/bentonite, tuff, sandstone and cover soil has been investigated. In addition, specimens of bitumen, cation and anion exchange resins, and polyester were chemically degraded. The resulting degradation product solutions, alongside solutions of humic and isosaccharinic acids were used to study the effects on plutonium sorption onto concrete, sand/bentonite and sandstone. The sorption behavior of plutonium and americium has been modeled using the geochemical speciation program HARPHRQ in conjunction with the HATCHES database

Solution NMR Structure of Hypothetical Protein CV_2116 Encoded by a Viral Prophage Element in Chromobacterium violaceum

Directory of Open Access Journals (Sweden)

Yunhuang Yang

2012-06-01

Full Text Available CV_2116 is a small hypothetical protein of 82 amino acids from the Gram-negative coccobacillus Chromobacterium violaceum. A PSI-BLAST search using the CV_2116 sequence as a query identified only one hit (E = 2e⁻⁰⁷ corresponding to a hypothetical protein OR16_04617 from Cupriavidus basilensis OR16, which failed to provide insight into the function of CV_2116. The CV_2116 gene was cloned into the p15TvLic expression plasmid, transformed into E. coli, and ¹³C- and ¹⁵N-labeled NMR samples of CV_2116 were overexpressed in E. coli and purified for structure determination using NMR spectroscopy. The resulting high-quality solution NMR structure of CV_2116 revealed a novel α + β fold containing two anti-parallel β -sheets in the N-terminal two-thirds of the protein and one α-helix in the C-terminal third of the protein. CV_2116 does not belong to any known protein sequence family and a Dali search indicated that no similar structures exist in the protein data bank. Although no function of CV_2116 could be derived from either sequence or structural similarity searches, the neighboring genes of CV_2116 encode various proteins annotated as similar to bacteriophage tail assembly proteins. Interestingly, C. violaceum exhibits an extensive network of bacteriophage tail-like structures that likely result from lateral gene transfer by incorporation of viral DNA into its genome (prophages due to bacteriophage infection. Indeed, C. violaceum has been shown to contain four prophage elements and CV_2116 resides in the fourth of these elements. Analysis of the putative operon in which CV_2116 resides indicates that CV_2116 might be a component of the bacteriophage tail-like assembly that occurs in C. violaceum.

Advances in the study of far-field phenomena affecting repository performance

International Nuclear Information System (INIS)

Tsang, C.F.

1991-01-01

Studies of far-field phenomena affecting repository performance have focussed on the role of fractures and other heterogeneities in the potential transport of radioactive solutes from the repository to the biosphere. The present paper summarizes two recent advances in the subject: the channeling model for the understanding and analysis tracer transport in variable-aperture fractures and the modeling of coupled thermo-hydro-mechanical processes in geologic formation around a repository. The paper concludes with remarks on the need for duality in the approach to performance assessment. One line of the duality is fundamental studies and the other, goal-oriented assessment to satisfy regulatory requirements. 15 refs., 10 figs., 1 tab

Multi-barrier system model of the geological repository for spent nuclear fuel

International Nuclear Information System (INIS)

Barátová, D.; Necas, V.

2016-01-01

The results on the analysis of radionuclide release from the geosphere of hypothetical repository in crystalline rocks are presented. Radionuclides with poor retentive properties (C-14, I-129, Cl-36, Cs-135), represent the largest contribution to the total release rate from the geosphere. A sensitivity analysis of selected geosphere parameters was also performed to evaluate an impact of uncertainties on the total maximum release rate from the geosphere. The results show that the data uncertainty related to the transmissivity distribution of individual transport pathways has the greatest impact on the total maximum release rate from the geosphere. The calculations of release rates were carried out for one disposal container using the simulation software GoldSim. (authors)

Learning Object Repositories

Science.gov (United States)

Lehman, Rosemary

2007-01-01

This chapter looks at the development and nature of learning objects, meta-tagging standards and taxonomies, learning object repositories, learning object repository characteristics, and types of learning object repositories, with type examples. (Contains 1 table.)

Safety analysis for the Abadia de Goias repository: alternative evaluation of the ingestion dose rate critical distance; Analise de seguranca para o repositorio de Abadia de Goias: avaliacao alternativa da distancia critica de taxa de dose de ingestao

Energy Technology Data Exchange (ETDEWEB)

Martin Alves, A.S. de; Passos, E.M. dos [NUCLEN, Rio de Janeiro, RJ (Brazil)

1995-12-31

An alternative calculation of the ingestion dose rate critical distance due to a hypothetical release of Cs-137 from the structure of the Repository of Abadia de Goias is presented. The release pathway considers the repository - groundwater region - well - and food chain. The main adopted modification comparing to the previous work is the inclusion of the convective and molecular diffusion terms in the radionuclide transport equation in addition to the radioactive decay term. (author). 6 refs, 1 tab.

Statistical methods for mechanistic model validation: Salt Repository Project

International Nuclear Information System (INIS)

Eggett, D.L.

1988-07-01

As part of the Department of Energy's Salt Repository Program, Pacific Northwest Laboratory (PNL) is studying the emplacement of nuclear waste containers in a salt repository. One objective of the SRP program is to develop an overall waste package component model which adequately describes such phenomena as container corrosion, waste form leaching, spent fuel degradation, etc., which are possible in the salt repository environment. The form of this model will be proposed, based on scientific principles and relevant salt repository conditions with supporting data. The model will be used to predict the future characteristics of the near field environment. This involves several different submodels such as the amount of time it takes a brine solution to contact a canister in the repository, how long it takes a canister to corrode and expose its contents to the brine, the leach rate of the contents of the canister, etc. These submodels are often tested in a laboratory and should be statistically validated (in this context, validate means to demonstrate that the model adequately describes the data) before they can be incorporated into the waste package component model. This report describes statistical methods for validating these models. 13 refs., 1 fig., 3 tabs

Evaluation of Radionuclides Migration from RADON-Type Radioactive Waste Repository in Geosphere and Biosphere

International Nuclear Information System (INIS)

Grigaliuniene, D.; Poskas, P.

2001-01-01

Migration of radionuclides from hypothetical ISAM RADON-Type repository is analysed there. This is the first comprehensive analysis for such type repository. Generated four different system evolution and radionuclides migration scenarios cover a wide range of possible system states. Off-site scenarios as well as on-site scenarios consider radionuclide release from disposal facility and migration in geosphere and biosphere. Calculations are performed using computer code AMBER. According to the results, the highest dose is from two on-site scenarios (SCE1 erosion scenario and SCE3). The most important radionuclides in this case are 226 Ra with its decay products, 228 Ra, and 239 Pu. The doses from short-lived and mobile radionuclides arc insignificant for all on-site scenarios. The doses for the off-site scenarios are less than 0,1 mSv/y. Radon gases may cause the dose of about 1 mSv/y. The comparison of the results from this study and IAEA report for similar scenarios shows that the differences in most cases are less than one order of magnitude. (author)

Geological repositories: The last nuclear frontier. International Conference on Geological Repositories: Political and Technical Progress, 8-10 December 2003, Stockholm, Sweden

International Nuclear Information System (INIS)

ElBaradei, M.

2003-01-01

Few issues play so central a role in the public acceptance of nuclear technologies as the management and disposal of spent fuel and radioactive waste. In the current climate, geological repositories have come to be viewed not as one option among many for completing the nuclear fuel cycle, but as the only sustainable solution achievable in the near term. But despite a longstanding agreement among experts that geological disposal can be safe, technologically feasible and environmentally sound, a large part of the general public remains skeptical. This statement deals with the challenges that IAEA is facing to build public confidence related to spent fuel repositories

Repository Rodeo Redux

CERN Document Server

Anez, Melissa; Donohue, Tim; Fyson, Will; Simko, Tibor; Wilcox, David

2017-01-01

You’ve got more repository questions and we’ve got more answers! Last year’s Repository Rodeo panel was a huge success, so we’re taking the show on the road to Brisbane for OR2017. Join representatives from the DSpace, Eprints, Fedora, Hydra, and Islandora communities as we (briefly) explain what each of our repositories actually does. We'll also talk about the directions of our respective technical and community developments, and related to the conference theme of Open: Innovation Knowledge Repositories, offer brief observations about the latest, most promising and/or most surprising innovations in our space. This panel will be a great opportunity for newcomers to Open Repositories to get a crash course on the major repository options and meet representatives from each of their communities. After a brief presentation from each representative, we'll open the session up for questions from the audience.

Groundwater age and lifetime expectancy modelling approach for site characterization and performance assessment of radwaste repository in clay formation

International Nuclear Information System (INIS)

Cornaton, F.; Perrochet, P.; Benabderrahmane, H.

2010-01-01

variables that are combined and used to assess the repository performance regarding its emplacement in the transposition zone. Age and lifetime expectancy distributions are solved considering advection and dispersion/diffusion processes according to the approach proposed by Cornaton and Perrochet (2006). Advective-dispersive age solutions are compared to available age dates of pore water within the two main calcareous aquifers (Dogger and Oxfordian) that embed the Callovo-Oxfordian host formation. Such a comparison is helpful for the consolidation of the flow calibration, the estimation of the transport porosity field (since porosity is age generator) and for analyzing the internal water mixing processes and hydraulic behavior of major faults. Lifetime expectancy solutions are used to predict the response at the biosphere resulting from contaminant mass input occurring at a series of hypothetical repository locations. Lifetime expectancy solutions combined with age solutions provide the distribution of total residence times within the domain (i.e the total time required to travel from recharge to discharge). The latter is used to map in the 3-D space the low- and high-speed flow zones at the local scale. Finally, the behavior of age solutions is investigated when the hydraulic regime is rendered transient in response to the climatic evolution during the past Million years and to the climatic projection for the coming Million years. Transient age solutions at actual time are useful to analyze the effect of the temporal flow regime variations on the measured age dates and on ages simulated under steady-flow conditions. (authors)

Status and future developments of risk analysis for repositories of radioactive wastes in salt formations in the Federal Republic of Germany

International Nuclear Information System (INIS)

Proske, R.

1977-01-01

In the Federal Republic of Germany a hypothetical repository for High-Level Radioactive Waste in a salt formation was taken as basis for a first attempt to use the methodology of risk analysis in order to get statements on the safety of such a geologic and mining system. Several institutions were engaged in drawing up fault trees, development of release models and calculation of the risk. A lot of R+D-work is scheduled to be carried out in future which includes optimization of the application of risk analysis methodology to geologic and mining systems, further development of release models, development of a model describing the migration of radionuclides in typical geologic strata and soils of the Federal Republic of Germany and application of risk analysis methodology to different repositories and disposal technologies

Summary of repository siting models. Final report

International Nuclear Information System (INIS)

Thomas, S.D.; Ross, B.; Mercer, J.W.

1982-07-01

This report is the first in a series of reports that will provide critical reviews and summaries of computer programs that can be used to analyze the potential performance of a high-level radioactive waste repository. The computer programs identified address the following phenomena: saturated and unsaturated subsurface flow, heat transport, solute transport, surface water runoff, geomechanical interactions, and geochemical interactions. The report identifies 183 computer programs that can be used to analyze a repository site and provides a summary description of 31 computer programs. The summary descriptions can be used: to assist in code evaluation, to facilitate code comparison, to determine applicability of codes to specific problems, to identify code deficiencies, and to provide a screening mechanism for code selection

EEI/UWASTE oversight of the DOE Repository Program by the Repository Information Exchange Team

International Nuclear Information System (INIS)

Henkel, C.J.; Supko, E.M.; Schwartz, M.H.

1993-01-01

The Utility Nuclear Waste and Transportation Program of the Edison Electric Institute (EEI/UWASTE) has conducted reviews of the US DOE's repository program through its Repository Information Exchange Team (RIET or Team). Eight such reviews have been conducted since 1985 covering topics that include repository program management and control; repository schedule; repository budget; quality assurance; site characterization; repository licensing; environmental issues; and institutional and public information activities. The utility industry has used these repository program reviews as a forum for providing DOE's Office of Civilian Radioactive Waste Management (OCRWM) with comments on the direction of the repository program, advice for future actions regarding quality assurance activities and repository licensing, and suggestions for management and control of the Repository Program. The most significant recommendations made by the utility industry through the RIET are discussed along with any subsequent action by OCRWM in response to or subsequent to utility industry recommendations. The process used by the RIET to develop its recommendations to OCRWM regarding the repository program is also discussed

Deep repository for spent nuclear fuel. Facility description - Layout E. Spiral ramp with one operational area

International Nuclear Information System (INIS)

Pettersson, Stig; Forsgren, Ebbe; Lange, Fritz

2002-04-01

ground. The proposal is based on a hypothetical inland location with a rail link. The report describes a layout with a spiral ramp as access to the deposition area and with a single operational area above ground. The ramp will be used as a transport route for heavy and bulky transports. A shaft, that connects the operational area with the central area of the deposition area, is used for utility systems and for staff transports between the surface and the deposition area. It has been assumed that the deposition areas and the central area are on the same level. The appendix, describing a two level alternative, shows how the underground area could be arranged if the deposition area for regular operation were to be divided into two levels. The facility description concentrates on the situation during regular operation. It also describes the gradual expansion programme, including land requirements and connections to existing infrastructure. The report concludes with some perspective sketches, which give a vision of how the repository might look when ready for operation. This facility description is a translation of the Swedish SKB report R-02-18. It is important to note that the report gives an example of one possible design for the deep repository. Many issues concerning system design, functional solutions, layout and design ought to be investigated further before deciding on the final design

Deep repository for spent nuclear fuel. Facility description - Layout E. Spiral ramp with one operational area

Energy Technology Data Exchange (ETDEWEB)

Pettersson, Stig [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Forsgren, Ebbe [SwedPower AB, Stockholm (Sweden); Lange, Fritz [Lange Art AB, Stockholm (Sweden)

2002-04-01

below ground. The proposal is based on a hypothetical inland location with a rail link. The report describes a layout with a spiral ramp as access to the deposition area and with a single operational area above ground. The ramp will be used as a transport route for heavy and bulky transports. A shaft, that connects the operational area with the central area of the deposition area, is used for utility systems and for staff transports between the surface and the deposition area. It has been assumed that the deposition areas and the central area are on the same level. The appendix, describing a two level alternative, shows how the underground area could be arranged if the deposition area for regular operation were to be divided into two levels. The facility description concentrates on the situation during regular operation. It also describes the gradual expansion programme, including land requirements and connections to existing infrastructure. The report concludes with some perspective sketches, which give a vision of how the repository might look when ready for operation. This facility description is a translation of the Swedish SKB report R-02-18. It is important to note that the report gives an example of one possible design for the deep repository. Many issues concerning system design, functional solutions, layout and design ought to be investigated further before deciding on the final design.

Repository development status in Spain

Energy Technology Data Exchange (ETDEWEB)

Rodriguez Beceiro, Alvaro; Zuloaga, Pablo [ENRESA (Spain)

2009-06-15

The paper describes the status of repository development for the different waste categories. Low and Intermediate Waste Disposal facility of El Cabril was commissioned in 1992 and is in normal operation. The major modifications and activities during the last years are the adaptation to waste streams not initially foreseen such as some decommissioning waste or waste from steel industry, and the improvement of its performance assessment, supported by a R and D and refined models. As part of this facility, a new disposal facility specifically intended for very low activity waste has been constructed and commissioned in July 2008. Its design is based on the European Directive for hazardous waste disposal. National policy for Nuclear Spent Fuel and High-Level waste is focused on the development of a centralized storage facility of the vault type, whose site location would be selected through a volunteering process. Meanwhile, with the aim of solving specific problems, three individual storage facilities are in different status at reactor sites. Research on final solution, including some repository aspects as well as separation and transmutation are being carried out in accordance to ENRESA's R and D program. ENRESA has developed conceptual designs for non site specific repositories, both in granite and clay, and has carried out their corresponding performance assessment exercises. (authors)

Analysis of the corrosion of carbon steels in simulated salt repository brines and acid chloride solutions at high temperatures

International Nuclear Information System (INIS)

Diercks, D.R.; Kassner, T.F.

1988-04-01

An analysis of literature data on the corrosion of carbon steels in anoxic brines and acid chloride solutions was performed, and the results were used to assess the expected life of high-level nuclear waste package containers in a salt repository environment. The corrosion rate of carbon steels in moderately acidic aqueous chloride environments obeys an Arrhenius dependence on temperature and a (pH 2 ) -1/2 dependence on hydrogen partial pressure. The cathodic reduction of water to produce hydrogen is the rate-controlling step in the corrosion process. An expression for the corrosion rate incorporating these two dependencies was used to estimate the corrosion life of several proposed waste package configurations. 42 refs., 11 figs., 2 tabs

Reducing hypothetical bias in choice experiments

DEFF Research Database (Denmark)

Ladenburg, Jacob; Olsen, Søren Bøye; Nielsen, Rasmus Christian Fejer

eliminate some of the hypothetical bias. The present paper tests an addition to Cheap Talk, an Opt-Out Reminder. The Opt-Out Reminder is an objective short script presented prior to the choice sets, prompting the respondent to choose the opt-out alternative, if he/she finds the proposed policy generated...... alternatives in a choice set too expensive. The results suggest that adding an Opt-Out Reminder to Cheap Talk can in fact reduce hypothetical bias even further and reduces some of the ineffectiveness of CT in relation to the survey bid range and experienced respondents....

Modeling of waste/near field interactions for a waste repository in bedded salt: the Dynamic Network (DNET) model

International Nuclear Information System (INIS)

Cranwell, R.M.

1983-01-01

The Fuel Cycle Risk Analysis Division of Sandia National Laboratories has been funded by the US Nuclear Regulatory Commission to develop a methodology for use in assessing the long-term risk from the disposal of radioactive wastes in deep geologic formations. As part of this program, the Dynamic Network (DNET) model was developed to investigate waste/near field interactions associated with the disposal of radioactive wastes in bedded salt formations. The model is a quasi-multi-dimensional network model with capabilities for simulating processes such as fluid flow, heat transport, salt dissolution, salt creep, and the effects of thermal expansion and subsedence on the rock units surrounding the repository. The use of DNET has been demonstrated in the analysis of a hypothetical disposal site containing a bedded salt formation as the host medium for the repository. An example of this demonstration analysis is discussed. Furthermore, the outcome of sensitivity analyses performed on the DNET model are presented

Repository simulation model: Final report

International Nuclear Information System (INIS)

1988-03-01

This report documents the application of computer simulation for the design analysis of the nuclear waste repository's waste handling and packaging operations. The Salt Repository Simulation Model was used to evaluate design alternatives during the conceptual design phase of the Salt Repository Project. Code development and verification was performed by the Office of Nuclear Waste Isolation (ONWL). The focus of this report is to relate the experience gained during the development and application of the Salt Repository Simulation Model to future repository design phases. Design of the repository's waste handling and packaging systems will require sophisticated analysis tools to evaluate complex operational and logistical design alternatives. Selection of these design alternatives in the Advanced Conceptual Design (ACD) and License Application Design (LAD) phases must be supported by analysis to demonstrate that the repository design will cost effectively meet DOE's mandated emplacement schedule and that uncertainties in the performance of the repository's systems have been objectively evaluated. Computer simulation of repository operations will provide future repository designers with data and insights that no other analytical form of analysis can provide. 6 refs., 10 figs

Final repositories for high-level radioactive waste; Endlagerung hochradioaktiver Abfaelle

Energy Technology Data Exchange (ETDEWEB)

NONE

2015-10-15

The brochure on final repositories for high-level radioactive waste covers the following issues: What is the origin of radioactive wastes? How large are the waste amounts? What is going to happen with the wastes? What is the solution for the Waste disposal? A new site search is started. Safety requirements for the final disposal of high-level radioactive wastes. Comparison of host rocks. Who is responsible and who will pay? Final disposal of high-level radioactive wastes worldwide. Short summary: History of the search for a final repository for high-level radioactive wastes in Germany.

Functional requirements for a central research imaging data repository.

Science.gov (United States)

Franke, Thomas; Gruetz, Romanus; Dickmann, Frank

2013-01-01

The current situation at many university medical centers regarding the management of biomedical research imaging data leaves much to be desired. In contrast to the recommendations of the German Research Foundation (DFG) and the German Council of Sciences and Humanities regarding the professional management of research data, there are commonly many individual data pools for research data in each institute and the management remains the responsibility of the researcher. A possible solution for this situation would be to install local central repositories for biomedical research imaging data. In this paper, we developed a scenario based on abstracted use-cases for institutional research undertakings as well as collaborative biomedical research projects and analyzed the functional requirements that a local repository would have to fulfill. We determined eight generic categories of functional requirements, which can be viewed as a basic guideline for the minimum functionality of a central repository for biomedical research imaging data.

BOLD responses in reward regions to hypothetical and imaginary monetary rewards.

Science.gov (United States)

Miyapuram, Krishna P; Tobler, Philippe N; Gregorios-Pippas, Lucy; Schultz, Wolfram

2012-01-16

Monetary rewards are uniquely human. Because money is easy to quantify and present visually, it is the reward of choice for most fMRI studies, even though it cannot be handed over to participants inside the scanner. A typical fMRI study requires hundreds of trials and thus small amounts of monetary rewards per trial (e.g. 5p) if all trials are to be treated equally. However, small payoffs can have detrimental effects on performance due to their limited buying power. Hypothetical monetary rewards can overcome the limitations of smaller monetary rewards but it is less well known whether predictors of hypothetical rewards activate reward regions. In two experiments, visual stimuli were associated with hypothetical monetary rewards. In Experiment 1, we used stimuli predicting either visually presented or imagined hypothetical monetary rewards, together with non-rewarding control pictures. Activations to reward predictive stimuli occurred in reward regions, namely the medial orbitofrontal cortex and midbrain. In Experiment 2, we parametrically varied the amount of visually presented hypothetical monetary reward keeping constant the amount of actually received reward. Graded activation in midbrain was observed to stimuli predicting increasing hypothetical rewards. The results demonstrate the efficacy of using hypothetical monetary rewards in fMRI studies. Copyright © 2011 Elsevier Inc. All rights reserved.

Repositories; Repositorios

Energy Technology Data Exchange (ETDEWEB)

Freire, Carolina Braccini; Tello, Cledola Cassia Oliveira de [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)]. E-mails: cbf@cdtn.br; tellocc@cdtn.br

2007-11-15

The use of the nuclear energy is increasing in all areas. Then the radioactive waste management is in continuous development to comply the national and international established requirements. The final objective is to assure that it will not have any contamination of the public or the environmental, and that the exposition doses will be lower than the radiological protection limits. The multi barrier concept for the repository is internationally recognized. Among the repository types, the most used are: near surface, geological formations and of deposition in rock cavities. This article explains the concept and the types of repository and gives some examples of them. (author)

Numerical modeling capabilities to predict repository performance

International Nuclear Information System (INIS)

1979-09-01

This report presents a summary of current numerical modeling capabilities that are applicable to the design and performance evaluation of underground repositories for the storage of nuclear waste. The report includes codes that are available in-house, within Golder Associates and Lawrence Livermore Laboratories; as well as those that are generally available within the industry and universities. The first listing of programs are in-house codes in the subject areas of hydrology, solute transport, thermal and mechanical stress analysis, and structural geology. The second listing of programs are divided by subject into the following categories: site selection, structural geology, mine structural design, mine ventilation, hydrology, and mine design/construction/operation. These programs are not specifically designed for use in the design and evaluation of an underground repository for nuclear waste; but several or most of them may be so used

Design and Implementation of a Hybrid Ontological-Relational Data Repository for SIEM Systems

Directory of Open Access Journals (Sweden)

Igor Saenko

2013-07-01

Full Text Available The technology of Security Information and Event Management (SIEM becomes one of the most important research applications in the area of computer network security. The overall functionality of SIEM systems depends largely on the quality of solutions implemented at the data storage level, which is purposed for the representation of heterogeneous security events, their storage in the data repository, and the extraction of relevant data for analytical modules of SIEM systems. The paper discusses the key issues of design and implementation of a hybrid SIEM data repository, which combines relational and ontological data representations. Based on the analysis of existing SIEM systems and standards, the ontological approach is chosen as a core component of the repository, and an example of the ontological data model for vulnerabilities representation is outlined. The hybrid architecture of the repository is proposed for implementation in SIEM systems. Since the most of works on the repositories of SIEM systems is based on the relational data model, the paper focuses mainly on the ontological part of the hybrid approach. To test the repository we used the data model intended for attack modeling and security evaluation, which includes both ontological and relational dimensions.

In Silico screening for functional candidates amongst hypothetical proteins

DEFF Research Database (Denmark)

Desler, Claus; Suravajhala, Prashanth; Sanderhoff, May

2009-01-01

eukaryotes. With the general belief that the majority of hypothetical proteins are the product of pseudogenes, it is essential to have a tool with the ability of pinpointing the minority of hypothetical proteins with a high probability of being expressed. RESULTS: Here, we present an in silico selection...

Enlargement of the Baldone near-surface radioactive waste repository

International Nuclear Information System (INIS)

Dreimanis, A.

2007-01-01

A unified analysis of the enlargement of the Baldone near-surface radioactive waste (RW) repository RADONS considers the interplay of the existing engineering, safety and infrastructure premises, with the foreseen newly socio-technical features. This enlargement consists in construction of two additional RW disposal vaults and in building a long-term storage facility for spent sealed sources at the RADONS territory. Our approach is based on consecutive analysis of following basic elements: - the origin of enlargement - the RADONS safety analysis and a set of optimal socio-technical solutions of Salaspils research reactor decommissioning waste management; - the enlargement - a keystone of the national RW management concept, including the long-term approach; - the enlargement concept - the result of international co-operation and obligations; - arrangement optimization of new disposal and storage space; - environmental impact assessment for the repository enlargement - the update of socio-technical studies. The study of the public opinion revealed: negative attitude to repository enlargement is caused mainly due to missing information on radiation level and on the RADONS previous operations. These results indicate: basic measures to improve the public attitude to repository enlargement: the safety upgrade, public education and compensation mechanisms. A detailed stakeholders engagement and public education plan is elaborated. (author)

Thermal Analysis of a Nuclear Waste Repository in Argillite Host Rock

Science.gov (United States)

Hadgu, T.; Gomez, S. P.; Matteo, E. N.

2017-12-01

Disposal of high-level nuclear waste in a geological repository requires analysis of heat distribution as a result of decay heat. Such an analysis supports design of repository layout to define repository footprint as well as provide information of importance to overall design. The analysis is also used in the study of potential migration of radionuclides to the accessible environment. In this study, thermal analysis for high-level waste and spent nuclear fuel in a generic repository in argillite host rock is presented. The thermal analysis utilized both semi-analytical and numerical modeling in the near field of a repository. The semi-analytical method looks at heat transport by conduction in the repository and surroundings. The results of the simulation method are temperature histories at selected radial distances from the waste package. A 3-D thermal-hydrologic numerical model was also conducted to study fluid and heat distribution in the near field. The thermal analysis assumed a generic geological repository at 500 m depth. For the semi-analytical method, a backfilled closed repository was assumed with basic design and material properties. For the thermal-hydrologic numerical method, a repository layout with disposal in horizontal boreholes was assumed. The 3-D modeling domain covers a limited portion of the repository footprint to enable a detailed thermal analysis. A highly refined unstructured mesh was used with increased discretization near heat sources and at intersections of different materials. All simulations considered different parameter values for properties of components of the engineered barrier system (i.e. buffer, disturbed rock zone and the host rock), and different surface storage times. Results of the different modeling cases are presented and include temperature and fluid flow profiles in the near field at different simulation times. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and

User Oriented Platform for Data Analytics in Medical Imaging Repositories.

Science.gov (United States)

Valerio, Miguel; Godinho, Tiago Marques; Costa, Carlos

2016-01-01

The production of medical imaging studies and associated data has been growing in the last decades. Their primary use is to support medical diagnosis and treatment processes. However, the secondary use of the tremendous amount of stored data is generally more limited. Nowadays, medical imaging repositories have turned into rich databanks holding not only the images themselves, but also a wide range of metadata related to the medical practice. Exploring these repositories through data analysis and business intelligence techniques has the potential of increasing the efficiency and quality of the medical practice. Nevertheless, the continuous production of tremendous amounts of data makes their analysis difficult by conventional approaches. This article proposes a novel automated methodology to derive knowledge from medical imaging repositories that does not disrupt the regular medical practice. Our method is able to apply statistical analysis and business intelligence techniques directly on top of live institutional repositories. It is a Web-based solution that provides extensive dashboard capabilities, including complete charting and reporting options, combined with data mining components. Moreover, it enables the operator to set a wide multitude of query parameters and operators through the use of an intuitive graphical interface.

Managing and Evaluating Digital Repositories

Science.gov (United States)

Zuccala, Alesia; Oppenheim, Charles; Dhiensa, Rajveen

2008-01-01

Introduction: We examine the role of the digital repository manager, discuss the future of repository management and evaluation and suggest that library and information science schools develop new repository management curricula. Method: Face-to-face interviews were carried out with managers of five different types of repositories and a Web-based…

Repository simulation tests

International Nuclear Information System (INIS)

Wicks, G.G.; Bibler, N.E.; Jantzen, C.M.; Plodinec, M.J.

1984-01-01

The repository simulation experiments described in this paper are designed to assess the performance of SRP waste glass under the most realistic repository conditions that can be obtained in the laboratory. These tests simulate the repository environment as closely as possible and introduce systematically the variability of the geology, groundwater chemistry, and waste package components during the leaching of the waste glass. The tests evaluate waste form performance under site-specific conditions, which differ for each of the geologic repositories under consideration. Data from these experiments will aid in the development of a realistic source term that can describe the release of radionuclides from SRP waste glass as a component of proposed waste packages. Hence, this information can be useful to optimize waste package design for SRP waste glass and to provide data for predicting long-term performance and subsequent conformance to regulations. The repository simulation tests also help to bridge the gap in interpreting results derived from tests performed under the control of the laboratory to the uncertainity and variability of field tests. In these experiments, site-specific repository components and conditions are emphasized and only the site specific materials contact the waste forms. An important feature of these tests is that both actual and simulated waste glasses are tested identically. 7 figures, 2 tables

A logistic and cost model for the transport of radioactive waste to a repository

International Nuclear Information System (INIS)

Hutchinson, D.L.; Gray, I.L.S.; Manville, W.D.

1997-01-01

UK Nirex Ltd is planning a deep repository for intermediate level radioactive waste, and also some low level waste. Part of this work is to develop a transport system to bring the packaged waste to the repository from nuclear industry sites across the United Kingdom. To assess the logistics and costs of this transport system and to provide inputs to the repository specification and design, Nirex has commissioned the development of a flexible computer model which can be used on a desktop PC. The requirements for the LOGCOST model are explained, and the solutions adopted, and then examples shown of the graphical and tabular outputs that LOGCOST can provide. (Author)

The repository ecology an approach to understanding repository and service interactions

CERN Document Server

CERN. Geneva; Hagemann, Melissa

2007-01-01

An increasing number of university institutions and other organisations are deciding to deploy repositories and a growing number of formal and informal distributed services are supporting or capitalising on the information these repositories provide. Despite reasonably well understood technical architectures, early majority adopters may struggle to articulate their place within the actualities of a wider information environment. The idea of a repository ecology provides developers and administrators with a useful way of articulating and analysing their place in the information environment, and the technical and organisational interactions they have, or are developing, with other parts of such an environment. This presentation will provide an overview of the concept of a repository ecology and examine some examples from the domains of scholarly communications and elearning.

Coupling fuel cycles with repositories: how repository institutional choices may impact fuel cycle design

International Nuclear Information System (INIS)

Forsberg, C.; Miller, W.F.

2013-01-01

The historical repository siting strategy in the United States has been a top-down approach driven by federal government decision making but it has been a failure. This policy has led to dispatching fuel cycle facilities in different states. The U.S. government is now considering an alternative repository siting strategy based on voluntary agreements with state governments. If that occurs, state governments become key decision makers. They have different priorities. Those priorities may change the characteristics of the repository and the fuel cycle. State government priorities, when considering hosting a repository, are safety, financial incentives and jobs. It follows that states will demand that a repository be the center of the back end of the fuel cycle as a condition of hosting it. For example, states will push for collocation of transportation services, safeguards training, and navy/private SNF (Spent Nuclear Fuel) inspection at the repository site. Such activities would more than double local employment relative to what was planned for the Yucca Mountain-type repository. States may demand (1) the right to take future title of the SNF so if recycle became economic the reprocessing plant would be built at the repository site and (2) the right of a certain fraction of the repository capacity for foreign SNF. That would open the future option of leasing of fuel to foreign utilities with disposal of the SNF in the repository but with the state-government condition that the front-end fuel-cycle enrichment and fuel fabrication facilities be located in that state

Final repository search together with the citizens. Information, consultation, dialogue, participation; Endlagersuche - gemeinsam mit den Buergern. Information, Konsultation, Dialog, Beteiligung

Energy Technology Data Exchange (ETDEWEB)

Mueller, Monika C.M. (ed.)

2013-07-01

The documentation on the Loccum meeting 2013 includes contributions on the following topics: Public participation for the final repository search; Lessons learned from the past; Public participation: what is expected? Experiences of repository operators on public participation; The TRIPLEX concept; From Gorleben to the law on final repository search: a long and a short story; Public participation concerning radioactive waste storage; The public has to be informed on the radioactive waste problem and the possible solutions; After consensus is before consensus - German final repository conflict between legislation and simulated public participation; Political concept of public participation; A fast final repository law will not bring about social peace; Good public participation on final repository search - requirements, challenges, questions and approaches.

Nuclide Release Behavior from a Repository for a Pyro-process HLW and SF due to Variation of the MWCF Properties

International Nuclear Information System (INIS)

Lee, Youn Myoung; Hwang, Yong Soo

2009-01-01

An assessment program for an optional evaluation of a repository both for disposal of such high-level wastes (HLWs) from various steps of pyro-processes of PWR spent nuclear fuel (SF) and for direct disposal of PWR and CANDU SFs has been developed by utilizing general purpose GoldSim developing tool, by which nuclide transports in the near- and far-field of a repository as well as a transport through a biosphere under various natural and manmade disruptive events affecting a nuclide release could be modeled and evaluated. KAERI has been in charge of modeling and developing assessment tools by which the above mentioned repository system could be assessed in accordance with various features, events, and processes (FEPs) that could happen in and around the repository system. To cope with such various natural and manmade disruptive FEPs as well as normal release scenarios, all the possible cases in view of the Korean circumstances should be modeled and have been evaluated even though we have not yet have any repository. A possible case, among many others, with the variation of such physical properties as the fracture width and the rock matrix diffusion depth, associated with the natural fractures in the geological rock media, along which nuclide could be transported preferentially with the flow of groundwater is considered in the current study. Due to whatever the reason, such as e,g., the earthquake or human intrusion, it is assumed that the physical properties of the major water conducting fault (MWCF) is changed resulting in the size of fracture width and the matrix diffusion depth. For such case another illustration is made for probabilistic evaluation of a hypothetical Korean HLW repository, as similarly done in the previous studies

An Adaptive SPARQL Engine with Dynamic Partitioning for Distributed RDF Repositories

KAUST Repository

Ibrahim, Yasser E.

2012-01-01

nature of the semantic web, it is in many cases impractical to assume a central repository, and more attention is being given to distributed RDF stores. This work is motivated by two major drawbacks of current solutions: 1) pre-processing part is very

The repository ecology: an approach to understanding repository and service interactions

CERN Multimedia

CERN. Geneva

2007-01-01

An increasing number of university institutions and other organisations are deciding to deploy repositories and a growing number of formal and informal distributed services are supporting or capitalising on the information these repositories provide. Despite reasonably well understood technical architectures, early majority adopters may struggle to articulate their place within the actualities of a wider information environment. The idea of a repository ecology provides developers and administrators with a useful way of articulating and analysing their place in the information environment, and the technical and organisational interactions they have, or are developing, with other parts of such an environment. This presentation will provide an overview of the concept of a repository ecology and examine some examples from the domains of scholarly communications and elearning. View John Robertson's biography

33 CFR Appendix B to Part 277 - Hypothetical Example of Cost Apportionment

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Hypothetical Example of Cost... APPORTIONMENT OF BRIDGE ALTERATIONS Pt. 277, App. B Appendix B to Part 277—Hypothetical Example of Cost... bridge was completed in 1908 and the superstructure completed in 1909. For this hypothetical example it...

Computational structural and functional analysis of hypothetical proteins of Staphylococcus aureus

OpenAIRE

Mohan, Ramadevi; Venugopal, Subhashree

2012-01-01

Genome sequencing projects has led to an explosion of large amount of gene products in which many are of hypothetical proteins with unknown function. Analyzing and annotating the functions of hypothetical proteins is important in Staphylococcus aureus which is a pathogenic bacterium that cause multiple types of diseases by infecting various sites in humans and animals. In this study, ten hypothetical proteins of Staphylococcus aureus were retrieved from NCBI and analyzed for their structural ...

47 CFR 69.608 - Carrier Common Line hypothetical net balance.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Carrier Common Line hypothetical net balance. 69.608 Section 69.608 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER... net balance. The hypothetical net balance shall be equal to a Carrier Common Line revenue requirement...

Pre-treatment of bituminized NPP wastes for disposal in near-surface repository

Energy Technology Data Exchange (ETDEWEB)

Vieira, Vanessa Mota; Tello, Clédola Cássia Oliveira de, E-mail: vanessamotavieira@gmail.com, E-mail: tellocc@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2017-07-01

The implementation of the national repository is an important technical requirement, and a legal requirement for the entry into operation of the nuclear power plant Angra 3. The Brazilian repository is being planned to be a near-surface one. In Brazil the low and intermediate level radioactive wastes are immobilized using cement and bitumen for Angra 1 and Angra 2 NPP, respectively. The main problems due to the disposal of bituminized wastes in repositories are swelling of the waste products and their degradation in the long term. To accommodate the swelling of the bituminized wastes, the drums are filled up to 70 - 90% of their volume, which reduces the structural the repository stability and the disposal availability. Countries, which use bitumen in the solidification of NPP's radioactive waste and have near-surface repositories, need to immobilize this bituminized waste within other drums containing cement pastes or mortars to disposal them. This study aims to find solutions for the storage in surface repository of bituminized radioactive waste products, making them compatible with the acceptance criteria of cemented waste products. It was also performed a modeling with the results obtained in the leaching test using the ALT program and defined the transport model of the cesium leachate element and it was verified that in the early times the leaching was governed by the diffusion model and later by the partition model. The results obtained in this study can be used in the evaluation of performance of repositories. (author)

Pre-treatment of bituminized NPP wastes for disposal in near-surface repository

International Nuclear Information System (INIS)

Vieira, Vanessa Mota; Tello, Clédola Cássia Oliveira de

2017-01-01

The implementation of the national repository is an important technical requirement, and a legal requirement for the entry into operation of the nuclear power plant Angra 3. The Brazilian repository is being planned to be a near-surface one. In Brazil the low and intermediate level radioactive wastes are immobilized using cement and bitumen for Angra 1 and Angra 2 NPP, respectively. The main problems due to the disposal of bituminized wastes in repositories are swelling of the waste products and their degradation in the long term. To accommodate the swelling of the bituminized wastes, the drums are filled up to 70 - 90% of their volume, which reduces the structural the repository stability and the disposal availability. Countries, which use bitumen in the solidification of NPP's radioactive waste and have near-surface repositories, need to immobilize this bituminized waste within other drums containing cement pastes or mortars to disposal them. This study aims to find solutions for the storage in surface repository of bituminized radioactive waste products, making them compatible with the acceptance criteria of cemented waste products. It was also performed a modeling with the results obtained in the leaching test using the ALT program and defined the transport model of the cesium leachate element and it was verified that in the early times the leaching was governed by the diffusion model and later by the partition model. The results obtained in this study can be used in the evaluation of performance of repositories. (author)

Repository operational criteria analysis

International Nuclear Information System (INIS)

Hageman, J.P.; Chowdhury, A.H.

1992-08-01

The objective of the ''Repository Operational Criteria (ROC) Feasibility Studies'' (or ROC task) was to conduct comprehensive and integrated analyses of repository design, construction, and operations criteria in 10 CFR Part 60 regulations, considering the interfaces and impacts of any potential changes to those regulations. The study addresses regulatory criteria related to the preclosure aspects of the geologic repository. The study task developed regulatory concepts or potential repository operational criteria (PROC) based on analysis of a repository's safety functions and other regulations for similar facilities. These regulatory concepts or PROC were used as a basis to assess the sufficiency and adequacy of the current criteria in 10 CFR Part 60. Where the regulatory concepts were same as current operational criteria, these criteria were referenced. The operations criteria referenced or the PROC developed are given in this report. Detailed analyses used to develop the regulatory concepts and any necessary PROC for those regulations that may require a minor change are also presented. The results of the ROC task showed a need for further analysis and possible major rule change related to the design bases of a geologic repository operations area, siting, and radiological emergency planning

Consortial routes to effective repositories

OpenAIRE

Moyle, M.; Proudfoot, R.

2009-01-01

A consortial approach to the establishment of repository services can help a group of Higher Education Institutions (HEIs) to share costs, share technology and share expertise. Consortial repository work can tap into existing structures, or it can involve new groupings of institutions with a common interest in exploring repository development. This Briefing Paper outlines some of the potential benefits of collaborative repository activity, and highlights some of the technical and organisation...

Studies of mechanisms and processes of relevance to the safety of nuclear waste repositories, as carried out prior to, during and after flovelling of the Hope potash salt mine

International Nuclear Information System (INIS)

1985-01-01

Studies on the effects of a hypothetical accident involving water or brine intrusion into a waste repository in a salt mine are of special importance within the framework of safety assessments of salt formations as candidate sites for nuclear waste repositories. The measuring activities under review include the following: Physicochemical measurements for determining dissolution and recipitation of salts, transport mechanisms, temperature curves, natural build-up and efficiency of geochemical barriers in the brine. Geochemical measurements for obtaining information on the rock deformation prior to, during, and after flovelling. Geophysical measurements of microseismic behaviour of rock masses prior to, during, and after flovelling. Examination of an artificial barrier structure for the testing and assessment of technical barriers and their efficiency. (orig./HP) [de

Estimation of the behaviors of selenium in the near field of repository

Energy Technology Data Exchange (ETDEWEB)

Kim, Seung Soo; Min, Jae Ho; Baik, Min Hoon; Kim, Gye Nam; Choi, Jong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2012-12-15

The sorption of selenium ions onto iron and iron compounds as a disposal container material and its corrosion products, and onto bentonite as a buffer material, was studied to understand the behaviors of selenium in a waste repository. Selenite was sorbed onto commercial magnetite very well in solutions at around pH 9, but silicate hindered their sorption onto both magnetite and ferrite. Unlike commercial magnetite and ferrite, flesh synthesized magnetite, green rust and iron greatly decreased selenium concentration even in a silicate solution. These results might be due to the formation of precipitates, or the sorption of selenide or selenite onto an iron surface at below Eh= -0.2 V. Red-colored Se(Cr) was observed on the surface of a reaction bottle containing iron powder added into a selenite solution. Silicate influences on the sorption onto magnetite and iron for selenide are the same as those for selenite. Even though bentonite adsorbed a slight amount of selenite, the sorption cannot be ignored in the waste repository since a very large quantity of bentonite is used.

FFSM, Long-Term Nuclear Waste Repository Site Simulation by Monte-Carlo

International Nuclear Information System (INIS)

Hadlock, L.R.; Hellstrom, D.I.; Mikulis, M.J.B.; Little, A.D.; Golis, M.J.

1988-01-01

1 - Description of program or function: FFSM (Far Field State Model) predicts the approximate geologic and climatic state of a site for a nuclear waste repository over relatively long periods of time. The purpose of FFSM is to represent quantitatively certain events and processes that could alter the effectiveness of one or more natural barriers in a waste isolation system. The barriers treated by the model are primarily components of the geologic environment surrounding the repository, although biosphere components (e.g. climate parameters) that could affect the impact of radionuclide releases are also considered. These components are treated outside the realm of wastes or repository-induced effects, which is indicated by use of the term f ar field . The model treats both natural and man-induced changes in these barriers within a probabilistic framework, and it accounts for cumulative and interactive effects of multiple phenomena. 2 - Method of solution: Fifteen submodels are included in FFSM to account for phenomena that may be of importance individually or in combination in evaluating sites for repositories. These submodels include: undetected features, climate, worldwide glaciation, local glaciation, folding, salt dispersion, magmatic events, faulting, biosphere state, regional deformation, geomorphic processes, dissolution fronts, localized dissolution (breccia pipes), solution mining, and drilling. FFSM can be used in both a deterministic mode, to evaluate interactions or to calculate point values, and a probabilistic mode, to make statistical estimates of future changes. In the probabilistic mode, Monte Carlo simulation is used to generate output probabilities, based on user-supplied input, largely in the form of probability density functions for variable or uncertain parameters

Towards a Swedish repository for spent fuel

International Nuclear Information System (INIS)

Ahlstroem, P.-E.

1997-01-01

Nuclear power is producing electricity for the benefit of society but is also leaving radioactive residues behind. It is our responsibility to handle these residues in a safe and proper manner. The development of a system for handling spent fuel from nuclear power plants has proceeded in steps. The same is true for the actual construction of facilities and will continue to be the case for the final repository for spent fuel and other types of long-lived wastes. The primary objective in constructing the repository will be to isolate and contain the radioactive waste. In case the isolation fails for some reason the multibarrier system should retain and retard the radionuclides that might come into contact with the groundwater. A repository is now planned to be built in two steps where the first step will include deposition of about 400 canisters with spent fuel. This first step should be finished in about 20 years from now and be followed by an extensive evaluation of the results from not only this particular step but also from the development of alternative routes before deciding on how to proceed. A special facility to encapsulate the spent fuel is also required. Such an encapsulation plant is proposed to be constructed as an extension of the existing interim storage CLAB. Finding a site for the repository is a critical issue in the implementation of any repository. The siting process started a few years ago and made some progress but is by no means yet completed. It will go on at least into the early part of the next decade. When the present nuclear power plants begin to be due for retirement there should also be some facilities in place to take permanent care of the long-lived radioactive residues. Progress in siting will be a prerequisite for success in our responsibility to make progress towards a safe permanent solution of the waste issue. (orig.)

Repository design

Energy Technology Data Exchange (ETDEWEB)

John, C M

1982-01-01

Various technical issues of radioactive waste design are addressed in this paper. Two approaches to repository design considered herein are: (1) design to minimize the disturbance of the hot rock; and (2) designs that intentionally modify the hot rock to insure better containment of the wastes. The latter designs range from construction of a highly impermeable barrier around a spherical cavern to creating a matrix of tunnels and boreholes to form a cage within which the hydraulic pressure is nearly constant. Examples of these design alternatives are described in some detail. It is concluded that proposed designs for repositories illustrate that performance criteria considered acceptable for such facilities can be met by appropriate site selection and repository engineering. With these technically feasible design concepts, it is also felt that socioeconomic and institutional issues can be better resolved. (BLM)

CARNSORE: Hypothetical reactor accident study

International Nuclear Information System (INIS)

Walmod-Larsen, O.; Jensen, N.O.; Kristensen, L.; Meide, A.; Nedergaard, K.L.; Nielsen, F.; Lundtang Petersen, E.; Petersen, T.; Thykier-Nielsen, S.

1984-06-01

Two types of design-basis accident and a series of hypothetical core-melt accidents to a 600 MWe reactor are described and their consequences assessed. The PLUCON 2 model was used to calculate the consequences which are presented in terms of individual and collective doses, as well as early and late health consequences. The site proposed for the nucelar power station is Carnsore Point, County Wexford, south-east Ireland. The release fractions for the accidents described are those given in WASH-1400. The analyses are based on the resident population as given in the 1979 census and on 20 years of data from the meteorological stations at Rosslare Harbour, 8.5 km north of the site. The consequences of one of the hypothetical core-melt accidents are described in detail in a meteorological parametric study. Likewise the consequences of the worst conceivable combination of situations are described. Finally, the release fraction in one accident is varied and the consequences of a proposed, more probable ''Class 9 accident'' are presented. (author)

Hydrologic issues in repository siting

International Nuclear Information System (INIS)

Remson, I.; Gorelick, S.M.

1982-01-01

Extrapolation of Darcy's law to the transport of water an solutes in unfractured poorly permeable rocks being studied for nuclear waste disposal is questioned. The hydrologic literature includes numerous references to both non-Darcian flow in dense materials devoid of macrofractures and microfractures and to threshold gradients below which no flow occurs. For such situations to occur, the pore-size range must be small enough so that all pore water is sufficiently close to mineral surfaces to be affected by the surficial forces. Then the flow will be non-Newtonian and non-Darcian, and solute transport will be by molecular diffusion. If fluid transport in very dense unfractured rocks is non-Darcian, useful methods of testing candidate host rocks become apparent. In situ nondestructive pressure testing of canister waste emplacement boreholes in a mined repository can verify the absence of both fracture flow and Darcian flow. 18 references

Current Status of Deep Geological Repository Development

International Nuclear Information System (INIS)

Budnitz, R J

2005-01-01

This talk provided an overview of the current status of deep-geological-repository development worldwide. Its principal observation is that a broad consensus exists internationally that deep-geological disposal is the only long-term solution for disposition of highly radioactive nuclear waste. Also, it is now clear that the institutional and political aspects are as important as the technical aspects in achieving overall progress. Different nations have taken different approaches to overall management of their highly radioactive wastes. Some have begun active programs to develop a deep repository for permanent disposal: the most active such programs are in the United States, Sweden, and Finland. Other countries (including France and Russia) are still deciding on whether to proceed quickly to develop such a repository, while still others (including the UK, China, Japan) have affirmatively decided to delay repository development for a long time, typically for a generation of two. In recent years, a major conclusion has been reached around the world that there is very high confidence that deep repositories can be built, operated, and closed safely and can meet whatever safety requirements are imposed by the regulatory agencies. This confidence, which has emerged in the last few years, is based on extensive work around the world in understanding how repositories behave, including both the engineering aspects and the natural-setting aspects, and how they interact together. The construction of repositories is now understood to be technically feasible, and no major barriers have been identified that would stand in the way of a successful project. Another major conclusion around the world is that the overall cost of a deep repository is not as high as some had predicted or feared. While the actual cost will not be known in detail until the costs are incurred, the general consensus is that the total life-cycle cost will not exceed a few percent of the value of the

Reference Design Description for a Geologic Repository

International Nuclear Information System (INIS)

2000-01-01

of the waste materials will result in fission products that pose a minimal radiological hazard to the public afterward. For example, after 100 years, the relative hazard from the waste fission products will have diminished approximately 90 percent. After 1,000 years, the hazard will have diminished 99 percent, and after 10,000 years it will have diminished 99.9 percent. The resulting radiological hazard after 10,000 years is minimal, being of the same order of magnitude as that posed by 0.2 percent uranium ore, which is equivalent to that which was used to originally produce the nuclear fuel. Because developing such a repository is extremely complex, the design will move forward in three stages: Site Recommendation, License Application, and Construction. This document presents the design as it will be submitted in the Site Recommendation Consideration Report; the design will be updated as the design process moves forward. As more cost-effective solutions, technical advancements, or changes to requirements occur, the design may evolve. The U.S. Department of Energy's (DOE) Office of Civilian Radioactive Waste Management is developing a system that includes this potential repository. This waste management system integrates acceptance, transportation, storage, and disposal of spent nuclear fuel and high-level radioactive waste. Acceptance and transportation will be handled by regional servicing contractors under contract to the DOE. The U.S. Nuclear Regulatory Commission will conduct an in-depth and thorough licensing review to determine the acceptability of the proposed waste management system. Eight sections of this document follow. Section 2 discusses the design requirements for the proposed repository. Section 3 describes the physical layout of the proposed repository. Section 4 describes the evolutionary phases of the development of the proposed repository. Section 5 describes the receipt of waste. Section 6 details the various systems that will package the waste

Centralized mouse repositories.

Science.gov (United States)

Donahue, Leah Rae; Hrabe de Angelis, Martin; Hagn, Michael; Franklin, Craig; Lloyd, K C Kent; Magnuson, Terry; McKerlie, Colin; Nakagata, Naomi; Obata, Yuichi; Read, Stuart; Wurst, Wolfgang; Hörlein, Andreas; Davisson, Muriel T

2012-10-01

Because the mouse is used so widely for biomedical research and the number of mouse models being generated is increasing rapidly, centralized repositories are essential if the valuable mouse strains and models that have been developed are to be securely preserved and fully exploited. Ensuring the ongoing availability of these mouse strains preserves the investment made in creating and characterizing them and creates a global resource of enormous value. The establishment of centralized mouse repositories around the world for distributing and archiving these resources has provided critical access to and preservation of these strains. This article describes the common and specialized activities provided by major mouse repositories around the world.

Demystifying the institutional repository for success

CERN Document Server

Buehler, Marianne

2013-01-01

Institutional repositories remain key to data storage on campus, fulfilling the academic needs of various stakeholders. Demystifying the Institutional Repository for Success is a practical guide to creating and sustaining an institutional repository through marketing, partnering, and understanding the academic needs of all stakeholders on campus. This title is divided into seven chapters, covering: traditional scholarly communication and open access publishing; the academic shift towards open access; what the successful institutional repository looks like; institutional repository collaboratio

The European Repository Landscape 2008 Inventory of Digital Repositories for Research Output

CERN Document Server

Van der Graaf, Maurits

2009-01-01

It is widely acknowledged that a common knowledge base for European research is necessary. Research repositories are an important innovation to the scientific information infrastructure. In 2006, digital repositories in the 27 countries of the European we

Criticality issues with highly enriched fuels in a repository environment

International Nuclear Information System (INIS)

Taylor, L.L.; Sanchez, L.C.; Rath, J.S.

1998-03-01

This paper presents preliminary analysis of a volcanic tuff repository containing a combination of low enrichment commercial spent nuclear fuels (SNF) and DOE-owned SNF packages. These SNFs were analyzed with respect to their criticality risks. Disposal of SNF packages containing significant fissile mass within a geologic repository must comply with current regulations relative to criticality safety during transportation and handling within operational facilities. However, once the repository is closed, the double contingency credits for criticality safety are subject to unremediable degradation, (e.g., water intrusion, continued presence of neutron absorbers in proximity to fissile material, and fissile material reconfiguration). The work presented in this paper focused on two attributes of criticality in a volcanic tuff repository for near-field and far-field scenarios: (1) scenario conditions necessary to have a criticality, and (2) consequences of a nuclear excursion that are components of risk. All criticality consequences are dependent upon eventual water intrusion into the repository and subsequent breach of the disposal package. Key criticality parameters necessary for a critical assembly are: (1) adequate thermal fissile mass, (2) adequate concentration of fissile material, (3) separation of neutron poison from fissile materials, and (4) sufficient neutron moderation (expressed in units of moderator to fissile atom ratios). Key results from this study indicated that the total energies released during a single excursion are minimal (comparable to those released in previous solution accidents), and the maximum frequency of occurrence is bounded by the saturation and temperature recycle times, thus resulting in small criticality risks

Predicting spent fuel oxidation states in a tuff repository

International Nuclear Information System (INIS)

Einziger, R.E.; Woodley, R.E.

1987-01-01

Nevada Nuclear Waste Storage Investigations Project (NNWSI) is studying the suitability of the tuffaceous rocks at Yucca Mountain as a waste repository for spent fuel disposal. The oxidation state of the LWR spent fuel in the moist air environment of a tuff repository could be a significant factor in determining its leaching and dissolution characteristics. Predictions as to which oxidation states would be present are important in analyzing such a repository and thus the present study was undertaken. A set of TGA (thermogravimetric analysis) tests were conducted on well-controlled samples of irradiated PWR fuel with time and temperature as the only variables. The tests were conducted between 140 and 225 0 C for a duration up to 2200 hours. The weight gain curves were analyzed in terms of diffusion through a layer of U 3 O 7 , diffusion into the grains to form a solid solution, a simplified empirical representation of a combination of grain boundary diffusion and bulk grain oxidation. Reaction rate constants were determined in each case, but analysis of these data could not establish a definitive mechanism. 21 refs., 10 figs., 3 tabs

Experimental investigation of factors affecting the control of redox conditions within a radwaste repository

International Nuclear Information System (INIS)

Guppy, R.M.; Atkinson, A.

1991-04-01

The maximum aqueous concentration of multivalent radioelements in a radwaste repository can be estimated from the expected Eh (the oxidising or reducing tendency of the solution) and pH of the aqueous phase in the repository so long as equilibrium between all oxidising and reducing species can be guaranteed. The objective of the work reported here was to ascertain whether any significant departures from redox equilibrium are likely to arise. Technetium (VII) species were exposed under anaerobic conditions to concentrations of ferrous, hydrogen sulphide and thiosulphate species likely to be present in a repository environment to establish which species are capable of reducing aqueous Tc(VII) to a less soluble Tc(IV) solid compound. Potential catalytic solid phases and phases capable of electron exchange were also exposed to Tc(VII) species under anaerobic, aerobic and hydrogen atmospheres. We have not been able to demonstrate conclusively that mutual equilibrium was attained between technetium and iron redox couples, nor that the apparent solubility of technetium was that expected from the resulting Eh and pH of the solution, although some technetium was removed from solution. Hydrogen did not reduce Tc(VII) within the timescale of the experiments and no catalytic effects by haematite or a cementitious backfill grout for reductions involving hydrogen were observable. Magnetite removed some technetium from solution, apparently by surface reaction, under inert (argon) and reducing (hydrogen) atmospheres. Sulphides, and to a lesser extent thiosulphates, will reduce the solubility of technetium to a very low level. (author)

Office of Geologic Repositories quality assurance plan for high-level radioactive waste repositories

International Nuclear Information System (INIS)

1986-08-01

This document sets forth geologic repository program-wide quality assurance program requirements and defines management's quality assurance responsibilities for the Office of Geologic Repositories and its projects. (LM)

Virtual patient repositories--a comparative analysis.

Science.gov (United States)

Küfner, Julia; Kononowicz, Andrzej A; Hege, Inga

2014-01-01

Virtual Patients (VPs) are an important component of medical education. One way to reduce the costs for creating VPs is sharing through repositories. We conducted a literature review to identify existing repositories and analyzed the 17 included repositories in regards to the search functions and metadata they provide. Most repositories provided some metadata such as title or description, whereas other data, such as educational objectives, were less frequent. Future research could, in cooperation with the repository provider, investigate user expectations and usage patterns.

Technology overview of mined repositories

International Nuclear Information System (INIS)

Gimera, R.; Thirumalai, K.

1982-01-01

Mined repositories present an environmentally viable option for permanent disposal of nuclear waste. This paper reviews the state-of-the-art mining technologies and identifies technological issues and developments necessary to mine a repository in basalt. The thermal loading, isolation, and retrieval requirements of a repository present unique technological challenges unknown to conventional mining practice. The technology issues and developments required in the areas of excavation, roof and ground support, equipment development, instrumentation development, and sealing are presented. Performance assessment methods must be developed to evaluate the adequacies of technologies developed to design, construct, operate, and decommission a repository. A stepwise test-and-development approach is used in the Basalt Waste Isolation Project to develop cost-effective technologies for a repository

Breast Cancer Tissue Repository

National Research Council Canada - National Science Library

Iglehart, J

1997-01-01

The Breast Tissue Repository at Duke enters its fourth year of finding. The purpose of the Repository at Duke is to provide substantial quantities of frozen tissue for explorative molecular studies...

Complex geologic characterization of the repository environment

Energy Technology Data Exchange (ETDEWEB)

Harper, T R [British Petroleum Research Center, Sunberry, England; Szymanski, J S

1982-01-01

The present basis for characterizing geological environments is identified in this paper, and the additional requirements imposed by the need to isolate high-level waste safely are discussed. Solutions to these additional requirements are proposed. The time scale of concern and the apparent complexity of the required multidisciplinary approach are identified. It is proposed that an increased use of the geologic record, together with a recognition that all geologic processes operate within an interdependent system, be a key feature in geologic characterization of deep repositories.

Properties of altered soils by alkaline solution: contribution in the performance evaluation of repositories; Propriedades de solos alterados por solucao alcalina: contribuicao na avaliacao de desempenho de repositorios

Energy Technology Data Exchange (ETDEWEB)

Calabria, Jaqueline Alves de Almeida

2015-07-01

The radioactive wastes from nuclear technology applications must be properly disposed in a repository, during the necessary time to ensure the human and the environment protection. The surface systems are largely considered for disposal of low and intermediate level radioactive waste, but generally require the use of engineering barriers to control the radionuclides release. An important engineering barrier is the backfill which is situated between the package and structural material, and has the functions of reducing the water infiltration and to promote the retardation of the radionuclide migration, among others. Therefore, the material to be used as backfill such as clays, cement, soils, rocks, must has good sorption, permeability and mechanical properties. The selection of the material will depend also largely on the material availability and installation design. The concrete is also used in the construction of repository, and its interaction with water induces its degradation, resulting in a high pH solution. This solution interacts with the backfilling materials promoting mineralogical alterations that results in significant changes in their key properties and performance as safety component of the repository. In this work, five Brazilian soils of Minas Gerais state, selected according to their generic characteristics along with information from Sistema Brasileiro de Classificacao de Solos (SiBCS) were investigated concerning their potential use as backfilling material in a superficial repository by the determination of retention capacity for cesium and iodine. Sorption-related parameters, used in the performance assessment of the soils, were obtained from experimental data fitting to different sorption isotherms models. The soil that showed the best sorption of Cs, was a clay soil that presented distribution coefficient (K{sub d}) of 90.5 mL.g{sup -1} and maximum sorption capacity (Q{sub max}) of 18.372 mg.g{sup -1}. Regarding the iodine, the sorption was

INSTITUTIONAL REPOSITORY: EMPLOYMENT IN EDUCATION

Directory of Open Access Journals (Sweden)

Vasyl P. Oleksyuk

2012-11-01

Full Text Available The article investigated the concept of «institutional repository» and determined the aspects of institutional repositories in higher education. Institutional Repositories are information systems that allow preserving, storing and disseminating scientific knowledge produced in higher education and scientific research institutions. This study presented the main aspects using institutional repositories in educational process (such as storage of scientific and educational information, means of organization activity of students, object of studying. This article produced the structure of communities and collections of the institutional. It is described the experience of implementing of DSpace in the learning process.

Trust in Digital Repositories

Directory of Open Access Journals (Sweden)

Elizabeth Yakel

2013-06-01

Full Text Available ISO 16363:2012, Space Data and Information Transfer Systems - Audit and Certification of Trustworthy Digital Repositories (ISO TRAC, outlines actions a repository can take to be considered trustworthy, but research examining whether the repository’s designated community of users associates such actions with trustworthiness has been limited. Drawing from this ISO document and the management and information systems literatures, this paper discusses findings from interviews with 66 archaeologists and quantitative social scientists. We found similarities and differences across the disciplines and among the social scientists. Both disciplinary communities associated trust with a repository’s transparency. However, archaeologists mentioned guarantees of preservation and sustainability more frequently than the social scientists, who talked about institutional reputation. Repository processes were also linked to trust, with archaeologists more frequently citing metadata issues and social scientists discussing data selection and cleaning processes. Among the social scientists, novices mentioned the influence of colleagues on their trust in repositories almost twice as much as the experts. We discuss the implications our findings have for identifying trustworthy repositories and how they extend the models presented in the management and information systems literatures.

Modelling of melting and solidification transport phenomena during hypothetical NPP severe accidents

International Nuclear Information System (INIS)

Sarler, B.

1992-01-01

A physical and mathematical framework to deal with the transport phenomena occuring during melting and solidification of the hypothetical NPP severe accidents is presented. It concentrates on the transient temperature, velocity, and species concentration distributions during such events. The framework is based on the Mixture Continuum Formulation of the components and phases, cast in the boundary-domain integral shape structured by the fundamental solution of the Laplace equation. The formulation could cope with various solid-liquid sub-systems through the inclusion of the specific closure relations. The deduced system of boundary-domain integral equations for conservation of mass, energy, momentum, and species could be solved by the boundary element discrete approximative method. (author) [sl

Analytic solution for one-dimensional diffusion of radionuclides from a waste package

International Nuclear Information System (INIS)

Oliver, D.L.

1985-01-01

This work implements an analytical solution for diffusion of radionuclides from a cylindrical waste form through the packing material into the surrounding host rock. Recent interest in predicting the performance of a proposed geological repository for nuclear waste has led to the development of several computer programs to predict the performance of such a repository for the next several millenia. These numerical codes are generally designed to accommodate a broad spectrum of geometrical configurations and repository conditions in order to accurately predict the behavior of the radionuclides in the repository environment. Confidence in such general purpose codes is gained by verifying the numerical modeling and the software through comparison of the numerical predictions generated by these computer codes with analytical solutions to reasonably complex problems. The analysis discussed herein implements the analytic solution, proposed by J.C. Jaeger in 1941 for radial diffusion through two concentric circular cylinders. Jaeger's solution was applied to the problem of diffusional mass transfer from a long cylindrical waste form and subsequently into the surrounding geological formation. Analytic predictions of fractional release rates, including the effects of sorption, were generated

Desiderata for healthcare integrated data repositories based on architectural comparison of three public repositories.

Science.gov (United States)

Huser, Vojtech; Cimino, James J

2013-01-01

Integrated data repositories (IDRs) are indispensable tools for numerous biomedical research studies. We compare three large IDRs (Informatics for Integrating Biology and the Bedside (i2b2), HMO Research Network's Virtual Data Warehouse (VDW) and Observational Medical Outcomes Partnership (OMOP) repository) in order to identify common architectural features that enable efficient storage and organization of large amounts of clinical data. We define three high-level classes of underlying data storage models and we analyze each repository using this classification. We look at how a set of sample facts is represented in each repository and conclude with a list of desiderata for IDRs that deal with the information storage model, terminology model, data integration and value-sets management.

Process mining software repositories

NARCIS (Netherlands)

Poncin, W.; Serebrenik, A.; Brand, van den M.G.J.

2011-01-01

Software developers' activities are in general recorded in software repositories such as version control systems, bug trackers and mail archives. While abundant information is usually present in such repositories, successful information extraction is often challenged by the necessity to

Mathematical modeling of radionuclide release through a borehole in a radioactive waste repository

International Nuclear Information System (INIS)

Choi, Heui Joo

1996-02-01

The effects of inadvertent human intrusion as a form of direct drilling into a radioactive waste repository are discussed in this thesis. It has been mentioned that the inadvertent direct drilling into the repository could provide a release pathway for radionuclides even with its low occurrence probability. The following analyses are carried out regarding the problem. The maximum concentration in a water-filled borehole penetrating a repository is computed with a simple geometry. The modeling is based upon the assumption of the diffusive mass transfer in the waste forms and the complete mixing in the borehole. It is shown that the maximum concentrations of six radionuclides in the borehole could exceed the Maximum Permissible Concentration. Also, the diffusive mass transport in a water-filled borehole is investigated with a solubility-limited boundary condition. An analytic solution is derived for this case. Results show that the diffusive mass transport is fast enough to justify the assumption of the complete mixing compared with the considered time span. The axial diffusive mass transport along a water-filled borehole is modeled to compute the release rate taking account of the rock matrix diffusion. The results show that the release of short-lived radionuclides are negligible due to the low concentration gradient in early time and the rock matrix diffusion. The release rates of four long-lived radionuclides are computed. It is also shown that the model developed could be applied to a borehole at a non-cylindrically shaped repository and the off-center drilling of a cylindrical repository. The release rates of long-lived nuclides through a porous material-filled borehole are computed. The results show that the release of all the long-lived nuclides is negligible up to half million years in the case that the borehole is filled with the porous material. The radiological effects of the nuclides released through the borehole penetrating the repository are computed

48 CFR 227.7108 - Contractor data repositories.

Science.gov (United States)

2010-10-01

... repositories. 227.7108 Section 227.7108 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS... Technical Data 227.7108 Contractor data repositories. (a) Contractor data repositories may be established when permitted by agency procedures. The contractual instrument establishing the data repository must...

Rock support for nuclear waste repositories

International Nuclear Information System (INIS)

Abramson, L.W.; Schmidt, B.

1984-01-01

The design of rock support for underground nuclear waste repositories requires consideration of special construction and operation requirements, and of the adverse environmental conditions in which some of the support is placed. While repository layouts resemble mines, design, construction and operation are subject to quality assurance and public scrutiny similar to what is experienced for nuclear power plants. Exploration, design, construction and operation go through phases of review and licensing by government agencies as repositories evolve. This paper discusses (1) the various stages of repository development; (2) the environment that supports must be designed for; (3) the environmental effects on support materials; and (4) alternative types of repository rock support

Reactions to Hypothetical, Jealousy Producing Events.

Science.gov (United States)

Hansen, Gary L.

1982-01-01

Asked subjects (N=220) how they would feel about their mates' behavior in eight hypothetical situations designed to measure jealousy. Responses indicated that jealousy is likely to be a major issue. Sex role orientation is most consistently related to jealousy with sex role traditional subjects being the most jealous. (Author)

National Radwaste Repository Mochovce

International Nuclear Information System (INIS)

2000-01-01

In this leaflet the National Radioactive Waste Repository in Mochovce (Repository) is described. The Mochovce National Radioactive Waste Repository is a surface multi-barrier type storage facility for solid and treated solidified radioactive wastes generated from the Slovak Republic nuclear power plants operation and decommissioning, research institutes, laboratories and hospitals. The Repository comprises a system of single- and double-row storage boxes. The first double-row is enclosed by a steel-structure building. The 18 x 6 x 5.5 m storage boxes are made of reinforced concrete. The wall thickness is 600 mm. Two-double-rows, i.e. 80 storage boxes were built as part of Stage I (1 row = 20 storage boxes). Each storage box has a storage capacity of 90 fibre concrete containers of 3.1 m 3 volume. The total storage capacity is 7200 containers with the overall storage volume of 22320 m 3

Adolescents' explicit and implicit evaluations of hypothetical and actual peers with different bullying participant roles.

Science.gov (United States)

Pouwels, J Loes; Lansu, Tessa A M; Cillessen, Antonius H N

2017-07-01

This study examined how adolescents evaluate bullying at three levels of specificity: (a) the general concept of bullying, (b) hypothetical peers in different bullying participant roles, and (c) actual peers in different bullying participant roles. Participants were 163 predominantly ethnic majority adolescents in The Netherlands (58% girls; M age =16.34years, SD=0.79). For the hypothetical peers, we examined adolescents' explicit evaluations as well as their implicit evaluations. Adolescents evaluated the general concept of bullying negatively. Adolescents' explicit evaluations of hypothetical and actual peers in the bullying roles depended on their own role, but adolescents' implicit evaluations of hypothetical peers did not. Adolescents' explicit evaluations of hypothetical peers and actual peers were different. Hypothetical bullies were evaluated negatively by all classmates, whereas hypothetical victims were evaluated relatively positively compared with the other roles. However, when adolescents evaluated their actual classmates, the differences between bullies and the other roles were smaller, whereas victims were evaluated the most negatively of all roles. Further research should take into account that adolescents' evaluations of hypothetical peers differ from their evaluations of actual peers. Copyright © 2017 Elsevier Inc. All rights reserved.

Analysis of Turkey’s Institutional Open Repositories: An Example of Dokuz Eylül University Institutional Open Repository

Directory of Open Access Journals (Sweden)

Korhan Levent Ertürk

2012-03-01

Full Text Available After the declaration of the Budapest Open Access Initiative in 2001, institutional open repositories are known as the most important tool of the self archiving, which is also known as green road. There are 26 institutional repositories, which are all compatible to international standards. All the institutional open repositories of Turkey mentioned before are listed in international open archive directories. In this study institutional open repository of Dokuz Eylül University is examined and institutional open repositories of Turkey are discussed.

Radioactive waste repository of high ecological safety

International Nuclear Information System (INIS)

Sobolev, I.; Barinov, A.; Prozorov, L.

2000-01-01

With the purpose to construct a radioactive waste repository of high ecological safety and reliable containment, MosNPO 'Radon' specialists have developed an advanced type repository - large diameter well (LBD) one. A project is started for the development of a technology for LDW repository construction and pilot operation of the new repository for 25-30 years. The 2 LDW repositories constructed at the 'Radon' site and the developed monitoring system are described

Consistency analysis of network traffic repositories

NARCIS (Netherlands)

Lastdrager, Elmer; Lastdrager, E.E.H.; Pras, Aiko

Traffic repositories with TCP/IP header information are very important for network analysis. Researchers often assume that such repositories reliably represent all traffic that has been flowing over the network; little thoughts are made regarding the consistency of these repositories. Still, for

Sellafield repository design concept

International Nuclear Information System (INIS)

1998-01-01

Between 1989 and 1997, UK Nirex Ltd carried out a programme of investigations to evaluate the potential of a site adjacent to the BNFL Sellafield works to host a deep repository for the United Kingdom's intermediate-level and certain low-level radioactive waste. The programme of investigations was wound down following the decision in March 1997 to uphold the rejection of the Company's planning application for the Rock Characterisation Facility (RCF), an underground laboratory which would have allowed further investigations to confirm whether or not the site would be suitable. Since that time, the Company's efforts in relation to the Sellafield site have been directed towards documenting and publishing the work carried out. The design concept for a repository at Sellafield was developed in parallel with the site investigations through an iterative process as knowledge of the site and understanding of the repository system performance increased. This report documents the Sellafield repository design concept as it had been developed, from initial design considerations in 1991 up to the point when the RCF planning application was rejected. It shows, from the context of a project at that particular site, how much information and experience has been gained that will be applicable to the development of a deep waste repository at other potential sites

Influence analysis of Github repositories.

Science.gov (United States)

Hu, Yan; Zhang, Jun; Bai, Xiaomei; Yu, Shuo; Yang, Zhuo

2016-01-01

With the support of cloud computing techniques, social coding platforms have changed the style of software development. Github is now the most popular social coding platform and project hosting service. Software developers of various levels keep entering Github, and use Github to save their public and private software projects. The large amounts of software developers and software repositories on Github are posing new challenges to the world of software engineering. This paper tries to tackle one of the important problems: analyzing the importance and influence of Github repositories. We proposed a HITS based influence analysis on graphs that represent the star relationship between Github users and repositories. A weighted version of HITS is applied to the overall star graph, and generates a different set of top influential repositories other than the results from standard version of HITS algorithm. We also conduct the influential analysis on per-month star graph, and study the monthly influence ranking of top repositories.

VS2DRTI: Simulating Heat and Reactive Solute Transport in Variably Saturated Porous Media.

Science.gov (United States)

Healy, Richard W; Haile, Sosina S; Parkhurst, David L; Charlton, Scott R

2018-01-29

Variably saturated groundwater flow, heat transport, and solute transport are important processes in environmental phenomena, such as the natural evolution of water chemistry of aquifers and streams, the storage of radioactive waste in a geologic repository, the contamination of water resources from acid-rock drainage, and the geologic sequestration of carbon dioxide. Up to now, our ability to simulate these processes simultaneously with fully coupled reactive transport models has been limited to complex and often difficult-to-use models. To address the need for a simple and easy-to-use model, the VS2DRTI software package has been developed for simulating water flow, heat transport, and reactive solute transport through variably saturated porous media. The underlying numerical model, VS2DRT, was created by coupling the flow and transport capabilities of the VS2DT and VS2DH models with the equilibrium and kinetic reaction capabilities of PhreeqcRM. Flow capabilities include two-dimensional, constant-density, variably saturated flow; transport capabilities include both heat and multicomponent solute transport; and the reaction capabilities are a complete implementation of geochemical reactions of PHREEQC. The graphical user interface includes a preprocessor for building simulations and a postprocessor for visual display of simulation results. To demonstrate the simulation of multiple processes, the model is applied to a hypothetical example of injection of heated waste water to an aquifer with temperature-dependent cation exchange. VS2DRTI is freely available public domain software. © 2018, National Ground Water Association.

Modelling of radionuclide transport along the underground access structures of deep geological repositories

Energy Technology Data Exchange (ETDEWEB)

Poller, A. [National Cooperative for the Disposal of Radioactive Waste (NAGRA), Wettingen (Switzerland); Smith, P. [SAM Switzerland GmbH, Zuerich (Switzerland); Mayer, G.; Hayek, M. [AF-Consult Switzerland AG, Baden (Switzerland)

2014-08-15

The arrangement and sealing of the access routes to a deep geological repository for radioactive waste should ensure that any radionuclide release from the emplacement rooms during the post closure phase does not by-pass the geological barriers of the repository system to a significant extent. The base case of the present study, where realistic values for the hydraulic properties of the seals and the associated excavation damage zones were assumed, assesses to what extent this is actually the case for different layout variants (ramp and shaft access and shaft access only). Furthermore, as a test of robustness of system performance against uncertainties related to such seals and the associated excavation damage zones, the present study also considers a broad spectrum of calculation cases including the hypothetical possibility that the seals perform much more poorly than expected and to check whether, consequently, the repository tunnel system and the access structures may provide significant release pathways. The study considers a generic repository system for high-level waste (HLW repository) and for low- and intermediate-level waste (L/ILW repository), both with Opalinus Clay as the host rock. It also considers the alternative possibilities of a ramp or a shaft as the access route for material transport (waste packages, etc.) to the underground facilities. Additional shafts, e.g. for the transport of persons and for ventilation, are included in both cases. The overall modelling approach consists of three broad steps: (a) the network of tunnels and access structures is implemented in a flow model, which serves to calculate water flow rates along the tunnels and through the host rock; (b) all relevant transport paths are implemented in a radionuclide release and transport model, the water flow rates being obtained from the preceding flow model calculations; (c) individual effective dose rates arising from the radionuclides released from the considered repository

Experimental alteration of R7T7 nuclear model glass in solutions with different salinities (90/sup 0/C, 1 bar): implications for the selection of geological repositories

Energy Technology Data Exchange (ETDEWEB)

Godon, N.; Thomassin, J.H.; Touray, J.C.; Vernaz, E.

1988-01-01

In order to simulate the leaching of nuclear wastes in repositories percolated by solutions of variable salinity, leaching tests of R7T7 glass in solutions with different NaCl contents have been performed at 90/sup 0/C and 1 bar using a static procedure. A comparison of the efficiency of the different leachants indicated that the alteration was maximum in pure water and in 23.7 g (NaCl) kg/sup -1/ solution. In deionized water, uranium- and rare-earth elements simulating the actinides were found quite immobile: they have not been detected in solution but are present in the alteration layer. On the other hand, in the 23.7 g (NaCl) kg/sup -1/ solution, high amounts of uranium, cerium and neodymium have been detected in solution and did not accumulate in the solid phases. In the highest salinity brines, the bulk reactivity of the glass decreased. In all leachants, the alteration layer was structured in two parts: hydrated glass and flakes. The flakes were mainly nickel-and zinc-bearing aluminosilicate phases. When crystallized, the flakes were identified as berthierine.

CRIS and Institutional Repositories

Directory of Open Access Journals (Sweden)

A Asserson

2010-04-01

Full Text Available CRIS (Current Research Information Systems provide researchers, research managers, innovators, and others with a view over the research activity of a domain. IRs (institutional repositories provide a mechanism for an organisation to showcase through OA (open access its intellectual property. Increasingly, organizations are mandating that their employed researchers deposit peer-reviewed published material in the IR. Research funders are increasingly mandating that publications be deposited in an open access repository: some mandate a central (or subject-based repository, some an IR. In parallel, publishers are offering OA but replacing subscription-based access with author (or author institution payment for publishing. However, many OA repositories have metadata based on DC (Dublin Core which is inadequate; a CERIF (Common-European Research Information Format CRIS provides metadata describing publications with formal syntax and declared semantics thus facilitating interoperation or homogeneous access over heterogeneous sources. The formality is essential for research output metrics, which are increasingly being used to determine future funding for research organizations.

Radionuclide solubility control by solid solutions

Energy Technology Data Exchange (ETDEWEB)

Brandt, F.; Klinkenberg, M.; Rozov, K.; Bosbach, D. [Forschungszentrum Juelich GmbH (Germany). Inst. of Energy and Climate Research - Nuclear Waste Management and Reactor Safety (IEK-6); Vinograd, V. [Frankfurt Univ. (Germany). Inst. of Geosciences

2015-07-01

The migration of radionuclides in the geosphere is to a large extend controlled by sorption processes onto minerals and colloids. On a molecular level, sorption phenomena involve surface complexation, ion exchange as well as solid solution formation. The formation of solid solutions leads to the structural incorporation of radionuclides in a host structure. Such solid solutions are ubiquitous in natural systems - most minerals in nature are atomistic mixtures of elements rather than pure compounds because their formation leads to a thermodynamically more stable situation compared to the formation of pure compounds. However, due to a lack of reliable data for the expected scenario at close-to equilibrium conditions, solid solution systems have so far not been considered in long-term safety assessments for nuclear waste repositories. In recent years, various solid-solution aqueous solution systems have been studied. Here we present state-of-the art results regarding the formation of (Ra,Ba)SO{sub 4} solid solutions. In some scenarios describing a waste repository system for spent nuclear fuel in crystalline rocks {sup 226}Ra dominates the radiological impact to the environment associated with the potential release of radionuclides from the repository in the future. The solubility of Ra in equilibrium with (Ra,Ba)SO{sub 4} is much lower than the one calculated with RaSO{sub 4} as solubility limiting phase. Especially, the available literature data for the interaction parameter W{sub BaRa}, which describes the non-ideality of the solid solution, vary by about one order of magnitude (Zhu, 2004; Curti et al., 2010). The final {sup 226}Ra concentration in this system is extremely sensitive to the amount of barite, the difference in the solubility products of the end-member phases, and the degree of non-ideality of the solid solution phase. Here, we have enhanced the fundamental understanding regarding (1) the thermodynamics of (Ra,Ba)SO{sub 4} solid solutions and (2) the

An analytic solution for one-dimensional diffusion of radionuclides from a waste package

International Nuclear Information System (INIS)

1985-01-01

This work implements an analytical solution for diffusion of radionuclides from a cylindrical waste form through the packing material into the surrounding host rock. Recent interest in predicting the performance of a proposed geological repository for nuclear waste has led to the development of several computer programs to predict the performance of such a repository for the next several millenia. These numerical codes are generally designed to accommodate a broad spectrum of geometrical configurations and repository conditions in order to accurately predict the behavior of the radionuclides in the repository environment. Confidence in such general purpose codes is gained by verifying the numerical modeling and the software through comparison of the numerical predictions generated by these computer codes with analytical solutions to reasonably complex problems. The analysis discussed herein implements the analytic solution, proposed by J.C. Jaeger in 1941 for radial diffusion through two concentric circular cylinders. Jaeger's solution was applied to the problem of diffusional mass transfer from a long cylindrical waste form and subsequently into the surrounding geological formation. Analytic predictions of fractional release rates, including the effects of sorption, were generated. 6 refs., 2 figs., 2 tabs

The physical and chemical environment and radionuclide migration in a low level radioactive waste repository

International Nuclear Information System (INIS)

Torok, J.; Buckley, L.P.

1988-01-01

The expected physical and chemical environment within the low-level radioactive waste repository to be sited at Chalk River is being studied to establish the rate of radionuclide migration. Chemical conditions in the repository are being assessed for their effect on buffer performance and the degradiation of the concrete structure. Experimental programs include the effect of changes in solution chemistry on radionuclide distribution between buffer/backfill materials and the aqueous phase; the chemical stability of the buffer materials and the determination of the controlling mechanism for radionuclide transport during infiltration

Differences in Behavior and Brain Activity during Hypothetical and Real Choices.

Science.gov (United States)

Camerer, Colin; Mobbs, Dean

2017-01-01

Real behaviors are binding consequential commitments to a course of action, such as harming another person, buying an Apple watch, or fleeing from danger. Cognitive scientists are generally interested in the psychological and neural processes that cause such real behavior. However, for practical reasons, many scientific studies measure behavior using only hypothetical or imagined stimuli. Generalizing from such studies to real behavior implicitly assumes that the processes underlying the two types of behavior are similar. We review evidence of similarity and differences in hypothetical and real mental processes. In many cases, hypothetical choice tasks give an incomplete picture of brain circuitry that is active during real choice. Copyright © 2016. Published by Elsevier Ltd.

Design and Development of a Web Based Digital Repository for Scholarly Communication: A Case of NM‐AIST Tanzania

Directory of Open Access Journals (Sweden)

Wasiwasi J. Mgonzo

2014-12-01

Full Text Available Institutional repositories are essential research infrastructures for research ‐based universities. A properly dimensioned institutional repository has the potential to increase research impact and enhance the visibility of an institution through its scholarly outputs. The aim of the study reported in this paper was to design and develop a web‐based digital repository for scholarly communications using NM‐AIST as a case study. The system was developed using open source software. Findings obtained from system validation tests show that the system is a viable solution to the major challenges encountered in the management and sharing of scholarly information at the institution.

Nuclear waste repository design and construction

International Nuclear Information System (INIS)

Bohlke, B.M.; Monsees, J.E.

1987-01-01

Extensive underground excavation will be required for construction of a mined geologic repository for nuclear waste. Hundreds of thousands of feet of drift will be required based on the conceptual layout design for each candidate nuclear waste repository. Comparison of boring and blasting excavation methods are discussed, as are special design and construction requirements (e.g., quality assurance procedures and performance assessment) for the nuclear waste repository. Comparisons are made between boring and blasting construction methods for the repository designs proposed for salt, volcanic tuff, and basalt

Global nuclear waste repository proposal highlights Australia's nuclear energy vacuum

International Nuclear Information System (INIS)

Anon.

1999-01-01

The Pangea proposal is disscused and considered relevant to Australia. A five-year research program by the company has identified Australia and Argentina as having the appropriate geological, economic and democratic credentials for such a deep repository, with Australia being favoured. A deep repository would be located where the geology has been stable for several hundred million years, so that there need not be total reliance on a robust engineered barrier system to keep the waste securely isolated for thousands of years. It would be a commercial undertaking and would have dedicated port and rail infrastructure. It would take spent fuel and other wastes from commercial reactors, and possibly also waste from weapons disposal programs. Clearly, while the primary ethical and legal principle is that each country is entirely responsible for its own waste, including nuclear waste (polluter pays etc), the big question is whether the concept of an international waste repository is acceptable ethically. Political and economic questions are secondary to this. By taking a fresh look at the reasons for the difficulties which have faced most national repository programs, and discarding the preconception that each country must develop its own disposal facilities, it is possible to define a class of simple, superior high isolation sites which may provide a multi-national basis for solving the nuclear waste disposal problem. The relatively small volumes of high-level wastes or spent fuel which arise from nuclear power production make shared repositories a feasible proposition. For small countries, the economies of scale which can be achieved make the concept attractive. For all countries, objective consideration of the relative merits of national and multi-national solutions is a prudent part of planning the management of long-lived radioactive wastes

National radioactive wasterRepository Mochovce

International Nuclear Information System (INIS)

2000-01-01

In this leaflet the scheme of the Mochovce National radioactive waste repository for the Slovak Republic is presented. The National radioactive waste repository in Mochovce is a surface type storage facility. It is intended for final disposal of solid and solidified low and intermediate radioactive waste produced during the operation of nuclear power plants and institutions located within the territory of the Slovak Republic. The Repository site is situated about 2 km northwest to the Mochovce NPP

Corrosion behavior of spent MTR fuel elements in a drowned salt mine repository

International Nuclear Information System (INIS)

Brodda, B.G.; Fachinger, J.

1995-01-01

Spent MTR fuel from German Material Test Reactors will not be reprocessed, but stored in a final salt repository in the deep geologic underground. Fuel elements will be placed in POLLUX containers, which are assumed to resist the corrosive attack of an accidentally formed concentrated salt brine for about 500 years. After a container failure the brine would contact the fuel element, corrode the aluminum plating and possibly leach radionuclides from the fuel. A source term for the calculation of radionuclide mobilization results from the investigation of the behavior of MTR fuel in this scenario, which has to be considered for the long-term safety analysis of a deep mined rock salt repository. Experiments with the different plating materials show that the considered aluminum alloys will not resist the corrosive attack of a brine solution, especially in the presence of iron, under the conditions in a drowned salt mine repository. Although differences in the corrosion rates of about two orders of magnitude were observed when applying different parameter sets, the deterioration must be considered to be almost instantaneous in geological terms. Radionuclides are mobilized from irradiated MTR fuel, when the meat of the fuel element becomes accessible to the brine solution. It seems, however, that the radionuclides are effectively trapped by the aluminum hydroxide formed, as the activity concentrations in the brine solution soon reach a constant level with the progressing corrosion of the cladding aluminum. In the presence of iron a more significant initial release was observed, but also in this case an equilibrium activity seems to be reached as a consequence of radionuclide trapping

Biological Web Service Repositories Review.

Science.gov (United States)

Urdidiales-Nieto, David; Navas-Delgado, Ismael; Aldana-Montes, José F

2017-05-01

Web services play a key role in bioinformatics enabling the integration of database access and analysis of algorithms. However, Web service repositories do not usually publish information on the changes made to their registered Web services. Dynamism is directly related to the changes in the repositories (services registered or unregistered) and at service level (annotation changes). Thus, users, software clients or workflow based approaches lack enough relevant information to decide when they should review or re-execute a Web service or workflow to get updated or improved results. The dynamism of the repository could be a measure for workflow developers to re-check service availability and annotation changes in the services of interest to them. This paper presents a review on the most well-known Web service repositories in the life sciences including an analysis of their dynamism. Freshness is introduced in this paper, and has been used as the measure for the dynamism of these repositories. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Evaluation of hypothetical (153)Gd source for use in brachytherapy.

Science.gov (United States)

Ghorbani, Mahdi; Behmadi, Marziyeh

2016-01-01

The purpose of this work is to evaluate the dosimetric parameters of a hypothetical (153)Gd source for use in brachytherapy and comparison of the dosimetric parameters with those of (192)Ir and (125)I sources. Dose rate constant, the radial dose function and the two dimensional (2D) anisotropy function data for the hypothetical (153)Gd source were obtained by simulation of the source using MCNPX code and then were compared with the corresponding data reported by Enger et al. A comprehensive comparison between this hypothetical source and a (192)Ir source with similar geometry and a (125)I source was performed as well. Excellent agreement was shown between the results of the two studies. Dose rate constant values for the hypothetical (153)Gd, (192)Ir, (125)I sources are 1.173 cGyh(-1) U(-1), 1.044 cGyh(-1) U(-1), 0.925 cGyh(-1) U(-1), respectively. Radial dose function for the hypothetical (153)Gd source has an increasing trend, while (192)Ir has more uniform and (125)I has more rapidly falling off radial dose functions. 2D anisotropy functions for these three sources indicate that, except at 0.5 cm distance, (192)Ir and (125)I have more isotropic trends as compared to the (153)Gd source. A more uniform radial dose function, and 2D anisotropy functions with more isotropy, a much higher specific activity are advantages of (192)Ir source over (153)Gd. However, a longer half-life of (153)Gd source compared to the other two sources, and lower energy of the source with respect to (192)Ir are advantages of using (153)Gd in brachytherapy versus (192)Ir source.

IAEA safeguards for geological repositories

International Nuclear Information System (INIS)

Moran, B.W.

2005-01-01

In September. 1988, the IAEA held its first formal meeting on the safeguards requirements for the final disposal of spent fuel and nuclear material-bearing waste. The consensus recommendation of the 43 participants from 18 countries at this Advisory Group Meeting was that safeguards should not terminate of spent fuel even after emplacement in, and closure of, a geologic repository.' As a result of this recommendation, the IAEA initiated a series of consultants' meetings and the SAGOR Programme (Programme for the Development of Safeguards for the Final Disposal of Spent Fuel in Geologic Repositories) to develop an approach that would permit IAEA safeguards to verify the non-diversion of spent fuel from a geologic repository. At the end of this process, in December 1997, a second Advisory Group Meeting, endorsed the generic safeguards approach developed by the SAGOR Programme. Using the SAGOR Programme results and consultants' meeting recommendations, the IAEA Department of Safeguards issued a safeguards policy paper stating the requirements for IAEA safeguards at geologic repositories. Following approval of the safeguards policy and the generic safeguards approach, the Geologic Repository Safeguards Experts Group was established to make recommendations on implementing the safeguards approach. This experts' group is currently making recommendations to the IAEA regarding the safeguards activities to be conducted with respect to Finland's repository programme. (author)

Radiation dose evaluation for hypothetical accident with transport package containing Iridium-192 source

International Nuclear Information System (INIS)

Trontl, K.; Bace, M.; Pevec, D.

2002-01-01

The aim of this paper is to evaluate dose rates for a hypothetical accident with transport package containing Iridium-192 source and to design additional shielding necessary for the safe unloading of the container, assuming that during the unloading process the whole contents of a radioactive source is unshielded and that the operation is going to take place at the site where a working area exists in the vicinity of the unloading location. Based on the calculated radiation dose rates, a single arrangement of the additional concrete shields necessary for reduction of the gamma dose rates to the permitted level is proposed. The proposed solution is optimal considering safety on one hand and costs on the other.(author)

Assessing Hypothetical Gravity Control Propulsion

OpenAIRE

Millis, Marc G.

2006-01-01

Gauging the benefits of hypothetical gravity control propulsion is difficult, but addressable. The major challenge is that such breakthroughs are still only notional concepts rather than being specific methods from which performance can be rigorously quantified. A recent assessment by Tajmar and Bertolami used the rocket equation to correct naive misconceptions, but a more fundamental analysis requires the use of energy as the basis for comparison. The energy of a rocket is compared to an ide...

Repository site characterization

International Nuclear Information System (INIS)

Voss, J.W.; Pentz, D.L.

1987-01-01

The characterization of candidate repository sites has a number of programmatic objectives. Principal among these is the acquisition of data: a) to determine the suitability of a site relative to the DOE repository siting guidelines, b) to support model development and calculations to determine the suitability of a site relative to the post closure criteria of the NRC and EPA, c) to support the design of a disposal system, including the waste package and the engineered barrier system, as well as the shafts and underground openings of the repository. In meeting the gaols of site characterization, the authors have an obligation to conduct their investigations within an appropriate budget and schedule. This mandates that a well-constructed and systematic plan for field investigations be developed. Such a plan must fully account for the mechanisms which will control the radiologic performance in the repository. The plan must also flexibly and dynamically respond to the results of each step of field investigation, responding to the spatial variability of earth as well as to enhanced understandings of the performance of the disposal system. Such a plan must ensure that sufficient data are available to support the necessary probabilistic calculations of performance. This paper explores the planning for field data acquisition with specific reference to requirements for demonstrations of the acceptable performance for disposal systems

Gas generation in repositories

International Nuclear Information System (INIS)

Biddle, P.; Rees, J.H.; McGahan, D.; Rushbrook, P.E.

1987-09-01

The nature and quantities of gases likely to be produced by various processes in repositories for low level and intermediate level radioactive wastes are examined in this preliminary study. Many simplifying assumptions are made where published or experimental data is unavailable. The corrosion of the canisters and metallic components in wastes is likely to be the major gas production process in both types of repository. A significant contribution from microbiological activity is expected to occur in low level repositories, predominantly where no cement grouting of the cans has been carried out. A number of areas for further research, required before a more comprehensive study could be carried out, have been identified. (author)

SUBSURFACE REPOSITORY INTEGRATED CONTROL SYSTEM DESIGN

International Nuclear Information System (INIS)

Randle, D.C.

2000-01-01

The primary purpose of this document is to develop a preliminary high-level functional and physical control system architecture for the potential repository at Yucca Mountain. This document outlines an overall control system concept that encompasses and integrates the many diverse process and communication systems being developed for the subsurface repository design. This document presents integrated design concepts for monitoring and controlling the diverse set of subsurface operations. The Subsurface Repository Integrated Control System design will be composed of a series of diverse process systems and communication networks. The subsurface repository design contains many systems related to instrumentation and control (I andC) for both repository development and waste emplacement operations. These systems include waste emplacement, waste retrieval, ventilation, radiological and air monitoring, rail transportation, construction development, utility systems (electrical, lighting, water, compressed air, etc.), fire protection, backfill emplacement, and performance confirmation. Each of these systems involves some level of I andC and will typically be integrated over a data communications network throughout the subsurface facility. The subsurface I andC systems will also interface with multiple surface-based systems such as site operations, rail transportation, security and safeguards, and electrical/piped utilities. In addition to the I andC systems, the subsurface repository design also contains systems related to voice and video communications. The components for each of these systems will be distributed and linked over voice and video communication networks throughout the subsurface facility. The scope and primary objectives of this design analysis are to: (1) Identify preliminary system-level functions and interfaces (Section 6.2). (2) Examine the overall system complexity and determine how and on what levels the engineered process systems will be monitored

Modeling the impact of climate change in Germany with biosphere models for long-term safety assessment of nuclear waste repositories

International Nuclear Information System (INIS)

Staudt, C.; Semiochkina, N.; Kaiser, J.C.; Pröhl, G.

2013-01-01

Biosphere models are used to evaluate the exposure of populations to radionuclides from a deep geological repository. Since the time frame for assessments of long-time disposal safety is 1 million years, potential future climate changes need to be accounted for. Potential future climate conditions were defined for northern Germany according to model results from the BIOCLIM project. Nine present day reference climate regions were defined to cover those future climate conditions. A biosphere model was developed according to the BIOMASS methodology of the IAEA and model parameters were adjusted to the conditions at the reference climate regions. The model includes exposure pathways common to those reference climate regions in a stylized biosphere and relevant to the exposure of a hypothetical self-sustaining population at the site of potential radionuclide contamination from a deep geological repository. The end points of the model are Biosphere Dose Conversion factors (BDCF) for a range of radionuclides and scenarios normalized for a constant radionuclide concentration in near-surface groundwater. Model results suggest an increased exposure of in dry climate regions with a high impact of drinking water consumption rates and the amount of irrigation water used for agriculture. - Highlights: ► We model Biosphere Dose Conversion Factors for a representative group exposed to radionuclides from a waste repository. ► The BDCF are modeled for different soil types. ► One model is used for the assessment of the influence of climate change during the disposal time frame.

Preliminary design of the repository. Stage 2

International Nuclear Information System (INIS)

Saanio, T.; Kirkkomaeki, T.; Keto, P.; Kukkola, T.; Raiko, H.

2007-04-01

Spent nuclear fuel from Finnish nuclear power plants will be disposed of in deep bedrock in Olkiluoto, Eurajoki. The repository is planned to be excavated at a depth of 400 - 500 metres. Access routes to the repository include a 1:10 inclined access tunnel, and vertical shafts. The fuel is encapsulated in the encapsulation plant above ground and transferred to the repository in the canister lift. Deposition tunnels, central tunnels and technical rooms are excavated at the disposal level. The canisters are deposited in deposition holes that are covered with bentonite blocks. The deposition holes are bored in the floors of the deposition tunnels. The central tunnel system consists of two parallel central tunnels that are inter-connected at certain distances. Two parallel central tunnels improve the fire safety of the rooms and also allow flexible backfilling and closing of the deposition tunnels in stages at the operational phase of the repository. An underground rock characterization facility, ONKALO, is excavated at the disposal level to support and confirm investigations carried out from above ground. ONKALO is designed so that it can later serve as part of the repository. ONKALO excavations were started in 2004. The repository will be excavated in the 2010s and operation will start in 2020. The fifth nuclear power unit makes the operational phase of the repository very long. Parts of the repository will be excavated and closed over the long operational period. The repository can be constructed at one or several levels. The one-storey alternative is the so-called reference alternative in this preliminary design report. The two-storey alternative is also taken into account in the ONKALO designs. The preliminary designs of the repository are presented as located in Olkiluoto. The location of the repository will be revised when more information on the bedrock has been gained. More detailed data of the circumstances will be obtained from above ground investigations

Preliminary design of the repository, stage 2

International Nuclear Information System (INIS)

Saanio, T.; Kirkkomaeki, T.; Keto, P.; Kukkola, T.; Raiko, H.

2007-01-01

Spent nuclear fuel from Finnish nuclear power plants will be disposed of in deep bedrock in Olkiluoto, Eurajoki. The repository is planned to be excavated at a depth of 400 - 500 metres. Access routes to the repository include a 1:10 inclined access tunnel, and vertical shafts. The fuel is encapsulated in the encapsulation plant above ground and transferred to the repository in the canister lift. Deposition tunnels, central tunnels and technical rooms are excavated at the disposal level. The canisters are deposited in deposition holes that are covered with bentonite blocks. The deposition holes are bored in the floors of the deposition tunnels. The central tunnel system consists of two parallel central tunnels that are inter-connected at certain distances. Two parallel central tunnels improve the fire safety of the rooms and also allow flexible backfilling and closing of the deposition tunnels in stages at the operational phase of the repository. An underground rock characterization facility, ONKALO, is excavated at the disposal level to support and confirm investigations carried out from above ground. ONKALO is designed so that it can later serve as part of the repository. ONKALO excavations were started in 2004. The repository will be excavated in the 2010s and operation will start in 2020. The fifth nuclear power unit makes the operational phase of the repository very long. Parts of the repository will be excavated and closed over the long operational period. The repository can be constructed at one or several levels. The one-storey alternative is the so-called reference alternative in this preliminary design report. The two-storey alternative is also taken into account in the ONKALO designs. The preliminary designs of the repository are presented as located in Olkiluoto. The location of the repository will be revised when more information on the bedrock has been gained. More detailed data of the circumstances will be obtained from above ground investigations

Nuclear waste repository siting

International Nuclear Information System (INIS)

Soloman, B.D.; Cameron, D.M.

1987-01-01

This paper discusses the geopolitics of nuclear waste disposal in the USA. Constitutional choice and social equity perspectives are used to argue for a more open and just repository siting program. The authors assert that every potential repository site inevitably contains geologic, environmental or other imperfections and that the political process is the correct one for determining sites selected

Granite-repository - geochemical environment

International Nuclear Information System (INIS)

1979-04-01

Some geochemical data of importance for a radioactive waste repository in hard rock are reviewed. The ground water composition at depth is assessed. The ground water chemistry in the vicinity of uranium ores is discussed. The redox system in Swedish bedrock is described. Influences of extreme climatic changes and of repository mining and construction are also evaluated

Workshop: Creating Your Institutional Research Repository

KAUST Repository

Grenz, Daryl M.

2016-11-08

In 2002, the Scholarly Publishing and Academic Resources Coalition (SPARC) proposed the concept of an institutional repository to simultaneously disrupt and enhance the state of scholarly communications in the academic world. Thirteen years later, thousands of universities and other institutions have answered this call, but many more have not due to gaps in budgets, awareness and, most of all, practical guidance on creating an institutional repository. This workshop provides you with an essential primer on what it takes to establish a fully-functioning institutional repository. Every aspect of the process will be covered, including policies, procedures, staffing guidelines, workflows and repository technologies.

Safeguards for geological repositories

International Nuclear Information System (INIS)

Fattah, A.

2000-01-01

Direct disposal of spent nuclear fuel in geological repositories is a recognised option for closing nuclear fuel cycles. Geological repositories are at present in stages of development in a number of countries and are expected to be built and operated early next century. A State usually has an obligation to safely store any nuclear material, which is considered unsuitable to re-enter the nuclear fuel cycle, isolated from the biosphere. In conjunction with this, physical protection has to be accounted for to prevent inadvertent access to such material. In addition to these two criteria - which are fully under the State's jurisdiction - a third criterion reflecting international non-proliferation commitments needs to be addressed. Under comprehensive safeguards agreements a State concedes verification of nuclear material for safeguards purposes to the IAEA. The Agency can thus provide assurance to the international community that such nuclear material has been used for peaceful purposes only as declared by the State. It must be emphasised that all three criteria mentioned constitute a 'unit'. None can be sacrificed for the sake of the other, but compromises may have to be sought in order to make their combination as effective as possible. Based on comprehensive safeguards agreements signed and ratified by the State, safeguards can be terminated only when the material has been consumed or diluted in such a way that it can no longer be utilised for any nuclear activities or has become practicably irrecoverable. As such safeguards for nuclear material in geological repositories have to be continued even after the repository has been back-filled and sealed. The effective application of safeguards must assure continuity-of-knowledge that the nuclear material in the repository has not been diverted for an unknown purpose. The nuclear material disposed in a geological repository may eventually have a higher and long term proliferation risk because the inventory is

Implementation of an OAIS Repository Using Free, Open Source Software

Science.gov (United States)

Flathers, E.; Gessler, P. E.; Seamon, E.

2015-12-01

The Northwest Knowledge Network (NKN) is a regional data repository located at the University of Idaho that focuses on the collection, curation, and distribution of research data. To support our home institution and others in the region, we offer services to researchers at all stages of the data lifecycle—from grant application and data management planning to data distribution and archive. In this role, we recognize the need to work closely with other data management efforts at partner institutions and agencies, as well as with larger aggregation efforts such as our state geospatial data clearinghouses, data.gov, DataONE, and others. In the past, one of our challenges with monolithic, prepackaged data management solutions is that customization can be difficult to implement and maintain, especially as new versions of the software are released that are incompatible with our local codebase. Our solution is to break the monolith up into its constituent parts, which offers us several advantages. First, any customizations that we make are likely to fall into areas that can be accessed through Application Program Interfaces (API) that are likely to remain stable over time, so our code stays compatible. Second, as components become obsolete or insufficient to meet new demands that arise, we can replace the individual components with minimal effect on the rest of the infrastructure, causing less disruption to operations. Other advantages include increased system reliability, staggered rollout of new features, enhanced compatibility with legacy systems, reduced dependence on a single software company as a point of failure, and the separation of development into manageable tasks. In this presentation, we describe our application of the Service Oriented Architecture (SOA) design paradigm to assemble a data repository that conforms to the Open Archival Information System (OAIS) Reference Model primarily using a collection of free and open-source software. We detail the design

Hypothetical Scenario Generator for Fault-Tolerant Diagnosis

Science.gov (United States)

James, Mark

2007-01-01

The Hypothetical Scenario Generator for Fault-tolerant Diagnostics (HSG) is an algorithm being developed in conjunction with other components of artificial- intelligence systems for automated diagnosis and prognosis of faults in spacecraft, aircraft, and other complex engineering systems. By incorporating prognostic capabilities along with advanced diagnostic capabilities, these developments hold promise to increase the safety and affordability of the affected engineering systems by making it possible to obtain timely and accurate information on the statuses of the systems and predicting impending failures well in advance. The HSG is a specific instance of a hypothetical- scenario generator that implements an innovative approach for performing diagnostic reasoning when data are missing. The special purpose served by the HSG is to (1) look for all possible ways in which the present state of the engineering system can be mapped with respect to a given model and (2) generate a prioritized set of future possible states and the scenarios of which they are parts.

Modelling saline intrusion for repository performance assessment

International Nuclear Information System (INIS)

Jackson, C.P.

1989-04-01

UK Nirex Ltd are currently considering the possibility of disposal of radioactive waste by burial in deep underground repositories. The natural pathway for radionuclides from such a repository to return to Man's immediate environment (the biosphere) is via groundwater. Thus analyses of the groundwater flow in the neighbourhood of a possible repository, and consequent radionuclide transport form an important part of a performance assessment for a repository. Some of the areas in the UK that might be considered as possible locations for a repository are near the coast. If a repository is located in a coastal region seawater may intrude into the groundwater flow system. As seawater is denser than fresh water buoyancy forces acting on the intruding saline water may have significant effects on the groundwater flow system, and consequently on the time for radionuclides to return to the biosphere. Further, the chemistry of the repository near-field may be strongly influenced by the salinity of the groundwater. It is therefore important for Nirex to have a capability for reliably modelling saline intrusion to an appropriate degree of accuracy in order to make performance assessments for a repository in a coastal region. This report describes work undertaken in the Nirex Research programme to provide such a capability. (author)

Analisis Konten dan Kebijakan Akses Institutional Repository

Directory of Open Access Journals (Sweden)

Amirul Ulum

2016-07-01

Abstract; Institutional repository has become a major concern of higher education in Indonesia. The number of institutional respository was increased, one of the reason is the ranking web of repositories has been conducted by the Cybermetrics Lab in 2008. At that time, many institutions started to build institutional repository in order to manage the scientific work and also trying to reach the better ranks. Meanwhile, it is an achievement of institution performance which can be promote and increase visibility for the institution. University of Surabaya has also developed the institutional repository and managed by the library. The aims of this study is to analyze the content availability and access policies defined by the University of Surabaya repository  providing services to the academic community and external users. The method used in this study by using observations of the institutional repository University of Surabaya with a literature review to clarify the analysis of the content and access policies. The results of this study indicate that the library's role is has the authority to manage the scientific work of academic community can be done through the institutional repository. However there is still need for library to be proactive to communicate regulations on mandatory deposit of scientific work and create intensive promotion of the institutional repository.

Process model repositories and PNML

NARCIS (Netherlands)

Hee, van K.M.; Post, R.D.J.; Somers, L.J.A.M.; Werf, van der J.M.E.M.; Kindler, E.

2004-01-01

Bringing system and process models together in repositories facilitates the interchange of model information between modelling tools, and allows the combination and interlinking of complementary models. Petriweb is a web application for managing such repositories. It supports hierarchical process

Radioactive waste repository study

International Nuclear Information System (INIS)

1978-11-01

This is the second part of a report of a preliminary study for AECL. It considers the requirements for an underground waste repository for the disposal of wastes produced by the Canadian Nuclear Fuel Program. The following topics are discussed with reference to the repository: 1) geotechnical assessment, 2) hydrogeology and waste containment, 3) thermal loading and 4) rock mechanics. (author)

Open DOAR the Directory of Open Access Repositories

CERN Multimedia

CERN. Geneva

2005-01-01

The last year has seen wide-spread growth in the idea of using open access repositories as a part of a research institution's accepted infrastructure. Policy development from institutions and funding bodies has also supported the growth of the repository network. The next stage of expansion will be in the provision of services and cross-repository facilities and resources. Of course, it is hoped that these will then establish a feed-back loop to encourage repository population and further repository establishment, as the potential of open access to research materials is realised. The growth of repositories has been organic, with a variety of different repositories based in departments, institutions, funding agencies or subject communities, with a range of content, both in type and subject. Existing repositories are expanding their holdings, from eprints to associated research data-sets, or with learning objects and multimedia material. This presentation will look at the development of the Directory of Open Ac...

Evaluasi Website Repositori Institusi Universitas Surabaya

Directory of Open Access Journals (Sweden)

Amirul Ulum

2015-11-01

Full Text Available The  development  of  institutional  repositories  (IRs  in Indonesia within the broader framework of open access has significant impact on preserving intellectual capital and scholarly communication. Institutional  repositories  play  a  fundamental  role  in  centralizing, preserving,  and  making  accessible  institution’s  intellectual  capital. Evaluation of the system is to determine the functionality the system to meet the users need. Using a descriptive analysis this study wants to evaluate institutional repositories of University of Surabaya. The result is usefull for institution to develop the repository systems.

3D numerical modelling of the thermal state of deep geological nuclear waste repositories

Science.gov (United States)

Butov, R. A.; Drobyshevsky, N. I.; Moiseenko, E. V.; Tokarev, Yu. N.

2017-09-01

One of the important aspects of the high-level radioactive waste (HLW) disposal in deep geological repositories is ensuring the integrity of the engineered barriers which is, among other phenomena, considerably influenced by the thermal loads. As the HLW produce significant amount of heat, the design of the repository should maintain the balance between the cost-effectiveness of the construction and the sufficiency of the safety margins, including those imposed on the thermal conditions of the barriers. The 3D finite-element computer code FENIA was developed as a tool for simulation of thermal processes in deep geological repositories. Further the models for mechanical phenomena and groundwater hydraulics will be added resulting in a fully coupled thermo-hydro-mechanical (THM) solution. The long-term simulations of the thermal state were performed for two possible layouts of the repository. One was based on the proposed project of Russian repository, and another features larger HLW amount within the same space. The obtained results describe the spatial and temporal evolution of the temperature filed inside the repository and in the surrounding rock for 3500 years. These results show that practically all generated heat was ultimately absorbed by the host rock without any significant temperature increase. Still in the short time span even in case of smaller amount of the HLW the temperature maximum exceeds 100 °C, and for larger amount of the HLW the local temperature remains above 100 °C for considerable time. Thus, the substantiation of the long-term stability of the repository would require an extensive study of the materials properties and behaviour in order to remove the excessive conservatism from the simulations and to reduce the uncertainty of the input data.

Simulated flow and solute transport, and mitigation of a hypothetical soluble-contaminant spill for the New River in the New River Gorge National River, West Virginia

Science.gov (United States)

Wiley, J.B.

1993-01-01

This report presents the results of a study by the U.S. Geological Survey (USGS), in cooperation with the National Park Service, to investigate the transport and factors affecting mitigation of a hypothetical spill of a soluble contaminant into the New River in the New River Gorge National River, West Virginia. The study reach, 53 miles of the lower New River between Hinton and Fayette, is characterized as a pool-and-riffle stream that becomes narrower, steeper, and deeper in the downstream direction. A USGS unsteady-flow model, DAFLOW (Diffusion Analogy FLOW), and a USGS solute-transport model, BLTM (Branch Lagrangian Transport Model), were applied to the study reach. Increases in discharge caused decreases in peak concentration and traveltime of peak concentration. Decreases in discharge caused increases in peak concentration and traveltime of peak concentration. This study indicated that the effects of an accidental spill could be mitigated by regulating discharge from Bluestone Dam. Knowledge of the chemical characteristics of the spill, location and time of the spill, and discharge of the river can aid in determining a mitigation response.

Alternative measure for performance of HLW geologic repository

International Nuclear Information System (INIS)

Joonhang, Ahn; Chambre, P.L.

2001-01-01

A repository performance model that can show effects of canister multiplicity and repository configuration has been developed. Masses of a radionuclide in the repository and in the far field are proposed as performance measures. Canister multiplicity has significant effects on the release of long-lived radionuclides from the repository. As more canisters are included in the same water stream, the radionuclide concentration in the stream increases, but becomes independent of the number of canisters for sufficiently many canisters. Effects of reduction of radionuclide mass in the repository on the repository performance are clearly observed if the canister multiplicity is taken into account and the mass-based measures are applied. (author)

Accelerator Physics Code Web Repository

CERN Document Server

Zimmermann, Frank; Bellodi, G; Benedetto, E; Dorda, U; Giovannozzi, Massimo; Papaphilippou, Y; Pieloni, T; Ruggiero, F; Rumolo, G; Schmidt, F; Todesco, E; Zotter, Bruno W; Payet, J; Bartolini, R; Farvacque, L; Sen, T; Chin, Y H; Ohmi, K; Oide, K; Furman, M; Qiang, J; Sabbi, G L; Seidl, P A; Vay, J L; Friedman, A; Grote, D P; Cousineau, S M; Danilov, V; Holmes, J A; Shishlo, A; Kim, E S; Cai, Y; Pivi, M; Kaltchev, D I; Abell, D T; Katsouleas, Thomas C; Boine-Frankenheim, O; Franchetti, G; Hofmann, I; Machida, S; Wei, J

2006-01-01

In the framework of the CARE HHH European Network, we have developed a web-based dynamic acceleratorphysics code repository. We describe the design, structure and contents of this repository, illustrate its usage, and discuss our future plans, with emphasis on code benchmarking.

ACCELERATION PHYSICS CODE WEB REPOSITORY.

Energy Technology Data Exchange (ETDEWEB)

WEI, J.

2006-06-26

In the framework of the CARE HHH European Network, we have developed a web-based dynamic accelerator-physics code repository. We describe the design, structure and contents of this repository, illustrate its usage, and discuss our future plans, with emphasis on code benchmarking.

Global nuclear waste repository proposal highlights Australia`s nuclear energy vacuum

Energy Technology Data Exchange (ETDEWEB)

Anon.

1999-06-01

The Pangea proposal is disscused and considered relevant to Australia. A five-year research program by the company has identified Australia and Argentina as having the appropriate geological, economic and democratic credentials for such a deep repository, with Australia being favoured. A deep repository would be located where the geology has been stable for several hundred million years, so that there need not be total reliance on a robust engineered barrier system to keep the waste securely isolated for thousands of years. It would be a commercial undertaking and would have dedicated port and rail infrastructure. It would take spent fuel and other wastes from commercial reactors, and possibly also waste from weapons disposal programs. Clearly, while the primary ethical and legal principle is that each country is entirely responsible for its own waste, including nuclear waste (polluter pays etc), the big question is whether the concept of an international waste repository is acceptable ethically. Political and economic questions are secondary to this. By taking a fresh look at the reasons for the difficulties which have faced most national repository programs, and discarding the preconception that each country must develop its own disposal facilities, it is possible to define a class of simple, superior high isolation sites which may provide a multi-national basis for solving the nuclear waste disposal problem. The relatively small volumes of high-level wastes or spent fuel which arise from nuclear power production make shared repositories a feasible proposition. For small countries, the economies of scale which can be achieved make the concept attractive. For all countries, objective consideration of the relative merits of national and multi-national solutions is a prudent part of planning the management of long-lived radioactive wastes

Consistency of Network Traffic Repositories: An Overview

NARCIS (Netherlands)

Lastdrager, E.; Lastdrager, E.E.H.; Pras, Aiko

2009-01-01

Traffc repositories with TCP/IP header information are very important for network analysis. Researchers often assume that such repositories reliably represent all traffc that has been flowing over the network; little thoughts are made regarding the consistency of these repositories. Still, for

48 CFR 227.7207 - Contractor data repositories.

Science.gov (United States)

2010-10-01

... repositories. 227.7207 Section 227.7207 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS... Computer Software and Computer Software Documentation 227.7207 Contractor data repositories. Follow 227.7108 when it is in the Government's interests to have a data repository include computer software or to...

Reference repository design concept for bedded salt

Energy Technology Data Exchange (ETDEWEB)

Carpenter, D.W.; Martin, R.W.

1980-10-08

A reference design concept is presented for the subsurface portions of a nuclear waste repository in bedded salt. General geologic, geotechnical, hydrologic and geochemical data as well as descriptions of the physical systems are provided for use on generic analyses of the pre- and post-sealing performance of repositories in this geologic medium. The geology of bedded salt deposits and the regional and repository horizon stratigraphy are discussed. Structural features of salt beds including discontinuities and dissolution features are presented and their effect on repository performance is discussed. Seismic hazards and the potential effects of earthquakes on underground repositories are presented. The effect on structural stability and worker safety during construction from hydrocarbon and inorganic gases is described. Geohydrologic considerations including regional hydrology, repository scale hydrology and several hydrological failure modes are presented in detail as well as the hydrological considerations that effect repository design. Operational phase performance is discussed with respect to operations, ventilation system, shaft conveyances, waste handling and retrieval systems and receival rates of nuclear waste. Performance analysis of the post sealing period of a nuclear repository is discussed, and parameters to be used in such an analysis are presented along with regulatory constraints. Some judgements are made regarding hydrologic failure scenarios. Finally, the design and licensing process, consistent with the current licensing procedure is described in a format that can be easily understood.

Reference repository design concept for bedded salt

International Nuclear Information System (INIS)

Carpenter, D.W.; Martin, R.W.

1980-01-01

A reference design concept is presented for the subsurface portions of a nuclear waste repository in bedded salt. General geologic, geotechnical, hydrologic and geochemical data as well as descriptions of the physical systems are provided for use on generic analyses of the pre- and post-sealing performance of repositories in this geologic medium. The geology of bedded salt deposits and the regional and repository horizon stratigraphy are discussed. Structural features of salt beds including discontinuities and dissolution features are presented and their effect on repository performance is discussed. Seismic hazards and the potential effects of earthquakes on underground repositories are presented. The effect on structural stability and worker safety during construction from hydrocarbon and inorganic gases is described. Geohydrologic considerations including regional hydrology, repository scale hydrology and several hydrological failure modes are presented in detail as well as the hydrological considerations that effect repository design. Operational phase performance is discussed with respect to operations, ventilation system, shaft conveyances, waste handling and retrieval systems and receival rates of nuclear waste. Performance analysis of the post sealing period of a nuclear repository is discussed, and parameters to be used in such an analysis are presented along with regulatory constraints. Some judgements are made regarding hydrologic failure scenarios. Finally, the design and licensing process, consistent with the current licensing procedure is described in a format that can be easily understood

OWLing Clinical Data Repositories With the Ontology Web Language.

Science.gov (United States)

Lozano-Rubí, Raimundo; Pastor, Xavier; Lozano, Esther

2014-08-01

The health sciences are based upon information. Clinical information is usually stored and managed by physicians with precarious tools, such as spreadsheets. The biomedical domain is more complex than other domains that have adopted information and communication technologies as pervasive business tools. Moreover, medicine continuously changes its corpus of knowledge because of new discoveries and the rearrangements in the relationships among concepts. This scenario makes it especially difficult to offer good tools to answer the professional needs of researchers and constitutes a barrier that needs innovation to discover useful solutions. The objective was to design and implement a framework for the development of clinical data repositories, capable of facing the continuous change in the biomedicine domain and minimizing the technical knowledge required from final users. We combined knowledge management tools and methodologies with relational technology. We present an ontology-based approach that is flexible and efficient for dealing with complexity and change, integrated with a solid relational storage and a Web graphical user interface. Onto Clinical Research Forms (OntoCRF) is a framework for the definition, modeling, and instantiation of data repositories. It does not need any database design or programming. All required information to define a new project is explicitly stated in ontologies. Moreover, the user interface is built automatically on the fly as Web pages, whereas data are stored in a generic repository. This allows for immediate deployment and population of the database as well as instant online availability of any modification. OntoCRF is a complete framework to build data repositories with a solid relational storage. Driven by ontologies, OntoCRF is more flexible and efficient to deal with complexity and change than traditional systems and does not require very skilled technical people facilitating the engineering of clinical software systems.

Using Invenio for managing and running open data repositories

CERN Multimedia

Simko, Tibor; Nielsen, Lars Holm

2017-01-01

We present how a research data repository manager can build custom open data solutions to ingest, describe, preserve, and disseminate the open research environments, datasets and software using the Invenio digital library framework. We discuss a concrete use case example of the CERN Open Data and Zenodo services, describing technological challenges in preparing large sets of data for general public. We address the questions of efficient linking and sharing of large quantities of data without unnecessary duplication on the backend, the role of the file transfer protocols, as well as the means to visualise data to make it more accessible and interactive for general public. The technological challenges and discussed solutions can be applied to any research discipline outside the domain of particle physics.

Using respondent uncertainty to mitigate hypothetical bias in a stated choice experiment

Science.gov (United States)

Richard C. Ready; Patricia A. Champ; Jennifer L. Lawton

2010-01-01

In a choice experiment study, willingness to pay for a public good estimated from hypothetical choices was three times as large as willingness to pay estimated from choices requiring actual payment. This hypothetical bias was related to the stated level of certainty of respondents. We develop protocols to measure respondent certainty in the context of a choice...

Radioactive waste repository of Cesium of Abadia de Goias. Construction and design; Repositorio de rejeitos radioativos de cesio - Abadia de Goias. Concepcao e projeto

Energy Technology Data Exchange (ETDEWEB)

Tranjan Filho, Alfredo [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil); Alves, Antonio Sergio de Martin; Santos, Cicero Durval Pacifici dos; Passos, Erivaldo Mario dos; Coutinho, Fernando Paulo Millen [NUCLEN Engenharia e Servicos S.A., Rio de Janeiro, RJ (Brazil)

1997-12-31

The main criteria, the methodology, the solutions and parameters that were utilized in the design of the Intermediate and Low Level Radioactive Waste Repository of Abadia de Goias are shortly described. The various design steps are analysed from the preparation of the Safety Analysis Report to the detailing engineering tasks. The safety analysis for the constructed repository had the goal of verifying the magnitude of radioecological impacts corresponding to idealized activity release scenarios, allowing also the possible effects of human intrusion in the repository. These safety studies are intrinsically connected to computer calculations envisaged to simulate the long term performance of the repository. (author) 18 refs., 7 figs., 7 tabs.

Finite element code FENIA verification and application for 3D modelling of thermal state of radioactive waste deep geological repository

Science.gov (United States)

Butov, R. A.; Drobyshevsky, N. I.; Moiseenko, E. V.; Tokarev, U. N.

2017-11-01

The verification of the FENIA finite element code on some problems and an example of its application are presented in the paper. The code is being developing for 3D modelling of thermal, mechanical and hydrodynamical (THM) problems related to the functioning of deep geological repositories. Verification of the code for two analytical problems has been performed. The first one is point heat source with exponential heat decrease, the second one - linear heat source with similar behavior. Analytical solutions have been obtained by the authors. The problems have been chosen because they reflect the processes influencing the thermal state of deep geological repository of radioactive waste. Verification was performed for several meshes with different resolution. Good convergence between analytical and numerical solutions was achieved. The application of the FENIA code is illustrated by 3D modelling of thermal state of a prototypic deep geological repository of radioactive waste. The repository is designed for disposal of radioactive waste in a rock at depth of several hundred meters with no intention of later retrieval. Vitrified radioactive waste is placed in the containers, which are placed in vertical boreholes. The residual decay heat of radioactive waste leads to containers, engineered safety barriers and host rock heating. Maximum temperatures and corresponding times of their establishment have been determined.

Can a Repeated Opt-Out Reminder remove hypothetical bias in discrete choice experiments?

DEFF Research Database (Denmark)

Alemu, Mohammed Hussen; Olsen, Søren Bøye

hypothetical bias in stated DCE. The data originates from a field experiment concerning consumer preferences for a novel food product made from cricket flour. Utilizing a between-subject design with three treatments, we find significantly higher marginal willingness to pay values in hypothetical than...

Safeguarding Structural Data Repositories against Bad Apples.

Science.gov (United States)

Minor, Wladek; Dauter, Zbigniew; Helliwell, John R; Jaskolski, Mariusz; Wlodawer, Alexander

2016-02-02

Structural biology research generates large amounts of data, some deposited in public databases or repositories, but a substantial remainder never becomes available to the scientific community. In addition, some of the deposited data contain less or more serious errors that may bias the results of data mining. Thorough analysis and discussion of these problems is needed to ameliorate this situation. This perspective is an attempt to propose some solutions and encourage both further discussion and action on the part of the relevant organizations, in particular the PDB and various bodies of the International Union of Crystallography. Copyright © 2016 Elsevier Ltd. All rights reserved.

Repository operational criteria comparative analysis

International Nuclear Information System (INIS)

Hageman, J.P.; Chowdhury, A.H.

1994-06-01

The objective of the ''Repository Operational Criteria (ROC) Feasibility Studies'' (or ROC task) was to conduct comprehensive and integrated analyses of repository design, construction, and operations criteria in 10 CFR Part 60 regulations considering the interfaces among the components of the regulations and impacts of any potential changes to those regulations. The ROC task addresses regulatory criteria and uncertainties related to the preclosure aspects of the geologic repository. Those parts of 10 CFR Part 60 that require routine guidance or minor changes to the rule were addressed in Hageman and Chowdhury, 1992. The ROC task shows a possible need for further regulatory clarity, by major changes to the rule, related to the design bases and siting of a geologic repository operations area and radiological emergency planning in order to assure defense-in-depth. The analyses, presented in this report, resulted in the development and refinement of regulatory concepts and their supporting rationale for recommendations for potential major changes to 10 CFR Pan 0 regulations

Use of Groundwater Lifetime Expectancy for the Performance Assessment of Deep Geologic Radioactive Waste Repositories.

Science.gov (United States)

Cornaton, F.; Park, Y.; Normani, S.; Sudicky, E.; Sykes, J.

2005-12-01

Long-term solutions for the disposal of toxic wastes usually involve isolation of the wastes in a deep subsurface geologic environment. In the case of spent nuclear fuel, the safety of the host repository depends on two main barriers: the engineered barrier and the natural geological barrier. If radionuclide leakage occurs from the engineered barrier, the geological medium represents the ultimate barrier that is relied upon to ensure safety. Consequently, an evaluation of radionuclide travel times from the repository to the biosphere is critically important in a performance assessment analysis. In this study, we develop a travel time framework based on the concept of groundwater lifetime expectancy as a safety indicator. Lifetime expectancy characterizes the time radionuclides will spend in the subsurface after their release from the repository and prior to discharging into the biosphere. The probability density function of lifetime expectancy is computed throughout the host rock by solving the backward-in-time solute transport equation subject to a properly posed set of boundary conditions. It can then be used to define optimal repository locations. In a second step, the risk associated with selected sites can be evaluated by simulating an appropriate contaminant release history. The proposed methodology is applied in the context of a typical Canadian Shield environment. Based on a statistically-generated three-dimension network of fracture zones embedded in the granitic host rock, the sensitivity and the uncertainty of lifetime expectancy to the hydraulic and dispersive properties of the fracture network, including the impact of conditioning via their surface expressions, is computed in order to demonstrate the utility of the methodology.

Workshops for state review of site suitability criteria for high-level radioactive waste repositories: analysis and recommendations

International Nuclear Information System (INIS)

1978-02-01

The purpose of this report is to present the views and recommendations of invited State officials and legislators participating in a workshop concerned with preliminary site suitability criteria for high level radioactive waste repositories. The workshops were open to the public and were conducted by the U. S. Nuclear Regulatory Commission (NRC) during September 1977 in three regional locations across the United States. This contractor report is the second of two reports and consolidates the discussion by State officials on the role of a State in siting a repository, NRC's waste management program, the transportation of high level wastes, the number and location of repositories and concerns with the socio-economic impacts of siting a repository in a community. The recommendations to the NRC can be categorized into four areas. These were: (1) general recommendations, (2) procedural recommendations, (3) recommendations for improving communications, and (4) specific recommendations on the preliminary siting criteria. The recommendations emphasized the need for early State involvement in the siting process, the need for an impacted State to assess repository operations, the need for early solution of waste transportation concerns, and the requirement that any repository developed insure the protection of the public health and safety as its most important characteristic. Other participant recommendations are included in the body of the report

Development of a methodology for post closure radiological risk analysis of underground waste repositories. Illustrative assessment of the Harwell site

International Nuclear Information System (INIS)

Gralewski, Z.A.; Kane, P.; Nicholls, D.B.

1987-06-01

A probabilistic risk analysis (pra) is demonstrated for a number of ground water mediated release scenarios at the Harwell Site for a hypothetical repository at a depth of about 150 metres. This is the second stage of development of an overall risk assessment methodology. A procedure for carrying out multi-scenario assessment using available probabilistic risk assessment (pra) models is presented and a general methodology for combining risk contributions is outlined. Appropriate levels of model complexity in pra are discussed. Modelling requirements for the treatment of multiple simultaneous pathways and of site evolution are outlined. Further developments of pra systems are required to increase the realism of both the models and their mode of application, and hence to improve estimates of risk. (author)

What do we mean by a cold repository?

International Nuclear Information System (INIS)

Halsey, W.G.

1994-01-01

The topic of thermal loading of a potential repository at Yucca Mountain in Nevada has been the subject of intense discussion within the project technical community. While terms such as ''Hot Repository'' and ''Cold Repository'' are frequently used, they have not been clearly defined. In particular, the definition of a cold repository has remained the opinion of each individual. This has led to confusion and misunderstanding. In this paper, a number of observed definitions for a cold repository are discussed along with the technical implications, assumptions and inconsistencies. Finally, a common language is suggested

Recharge-area nuclear waste repository in southeastern Sweden. Demonstration of hydrogeologic siting concepts and techniques

International Nuclear Information System (INIS)

Provost, A.M.; Voss, C.I.

2001-11-01

sites are evaluated using a three-dimensional, variable-density flow and solute transport model of southeastern Sweden under present interglacial conditions. The analysis considers four structural models of the bedrock that represent the possible range of regional anisotropy in permeability. Results indicate that potential repository sites at Hultsfred and another comparison site have travel times ten times or longer than sites at Simpevarp and Oskarshamn, and at worst, have travel times equivalent to the latter sites. Potential repository sites at Simpevarp and Oskarshamn have flow paths of less than 3 kilometers (lower values cannot be resolved by the current model), while the Hultsfred and comparison sites have path lengths ranging from 25 kilometers to 130 kilometers, and much greater flow path volumes. Given the uncertainties in bedrock structure, thus, it is more likely that the Hultsfred site will provide greater flow path, travel time, and flow path volume than the coastal Simpevarp and Oskarshamn sites, and may therefore be preferable in terms of the hydrogeologic safety margin. Additionally, there are other repository locations in southeastern Sweden, such as the comparison site, that improve substantially on the Hultsfred site. Three techniques are introduced for illuminating important aspects of the three-dimensional flow field in a numerical model. (1) A technique for tracing the flow paths and flow path volume from potential repository sites in a three-dimensional variable-density ground-water model involves a solute transport simulation that fills the flow tube passing through the repository with a non-zero concentration. (2) Recharge areas may be mapped in the model by means of a transport simulation that delineates where inflow occurs to the top surface of the model. (3) Travel times may be determined in a 'return-flow time' transport simulation, in which the flow field is reversed and the solute undergoes a zero-order production rate of one per year

Thermodynamic coupling of heat and matter flows in near-field regions of nuclear waste repositories

International Nuclear Information System (INIS)

Carnahan, C.L.

1983-11-01

In near-field regions of nuclear waste repositories, thermodynamically coupled flows of heat and matter can occur in addition to the independent flows in the presence of gradients of temperature, hydraulic potential, and composition. The following coupled effects can occur: thermal osmosis, thermal diffusion, chemical osmosis, thermal filtration, diffusion thermal effect, ultrafiltration, and coupled diffusion. Flows of heat and matter associated with these effects can modify the flows predictable from the direct effects, which are expressed by Fourier's law, Darcy's law, and Fick's law. The coupled effects can be treated quantitatively together with the direct effects by the methods of the thermodynamics of irreversible processes. The extent of departure of fully coupled flows from predictions based only on consideration of direct effects depends on the strengths of the gradients driving flows, and may be significant at early times in backfills and in near-field geologic environments of repositories. Approximate calculations using data from the literature and reasonable assumptions of repository conditions indicate that thermal-osmotic and chemical-osmotic flows of water in semipermeable backfills may exceed Darcian flows by two to three orders of magnitude, while flows of solutes may be reduced greatly by ultrafiltration and chemical osmosis, relative to the flows predicted by advection and diffusion alone. In permeable materials, thermal diffusion may contribute to solute flows to a smaller, but still significant, extent

Radioactive waste repository study

International Nuclear Information System (INIS)

1978-11-01

This is the first part of a report of a preliminary study for Atomic Energy of Canada Limited. It considers the requirements for an underground waste repository for the disposal of wastes produced by the Canadian Nuclear Fuel Program. The following topics are discussed with reference to the repository: 1) underground layout, 2) cost estimates, 3) waste handling, 4) retrievability, decommissioning, sealing and monitoring, and 5) research and design engineering requirements. (author)

MAJOR REPOSITORY DESIGN ISSUES

International Nuclear Information System (INIS)

JACK N. BAILEY, DWAYNE CHESTNUT, JAMES COMPTON AND RICHARD D. SNELL

1997-01-01

The Yucca Mountain Project is focused on producing a four-part viability assessment in late FY98. Its four components (design, performance assessment, cost estimate, and licensing development plan) must be consistent. As a tool to compare design and performance assessment options, a series of repository pictures were developed for the sequential time phases of a repository. The boundaries of the time phases correspond to evolution in the engineered barrier system (EBS)

The PHREEQC modeling of CO{sub 2} transport in highly saline solutions of a final radioactive waste repository; PHREEQC. Modellierung des Transportes von CO{sub 2} in hochsalinaren Loesungen eines Endlagers

Energy Technology Data Exchange (ETDEWEB)

Weyand, Torben [Bonn Univ. (Germany); Gesellschaft fuer Reaktorsicherheit mbH (GRS), Koeln (Germany); Bracke, Guido [Gesellschaft fuer Reaktorsicherheit mbH (GRS), Koeln (Germany); Reichert, Barbara [Bonn Univ. (Germany)

2014-03-15

The safe confinement of radioactive materials in the containment providing zone of the host rock (CPRZ) over a period of one million years is required for a final repository for highly radioactive heat-generating waste (BMU 2010). In order to assess the safe containment of radionuclides in the CPRZ a sound understanding of the ongoing processes in a repository is necessary. These processes include the transport and chemical interactions of the radionuclide {sup 14}C in the gas phase and in highly saline solutions in a final repository for radioactive waste. The geochemical code PHREEQC /PAR 13/ was used to study the chemical interactions of CO{sub 2} and {sup 14}C as {sup 14}CO{sub 2} during transport in the gas phase and highly saline solutions. The model and scenario was based on the concept for a repository in Gorleben /BOL 11/. A gas generation of CO{sub 2} containing {sup 14}C was assumed since the disposed containers with the radioactive waste corrode /LAR 13/. The advective transport is triggered by gas generation. The physical dissolution of CO{sub 2}, chemical equilibria with aquatic carbon-containing species (e. g. HCO{sub 3}{sup -}(aq), CO{sub 3}{sup 2-}(aq)) and solid phases (e. g. magnesite, MgCO{sub 3}) coupled with transport were modelled. Due to the addition of dissolved MgCl{sub 2} in the crushed salt backfill of the main drift the aquatic species MgCO{sub 3}(aq) and the mineral MgCO{sub 3}(s) is formed. The influence of CO{sub 2} partial pressure and the chemical interactions in the presence of dissolved Fe{sup 2+}, Ca{sup 2+}, Mg{sup 2+} and K{sup +} were studied. Due to the physical solution, the CO{sub 2} partial pressure has a major influence on the transport of {sup 14}C. In the presence of calcium CaCO{sub 3}(aq), the minerals calcite (CaCO{sub 3}(s)) and dolomite (MgCa(CO{sub 3}){sub 2}(s)) were formed in the highly saline solutions. No siderite (FeCO{sub 3}) in the presence of Fe{sup 2+} was formed. The transport of {sup 14}C was delayed

Seismic stability of the survey areas of potential sites for the deep geological repository of the spent nuclear fuel

Science.gov (United States)

Kaláb, Zdeněk; Šílený, Jan; Lednická, Markéta

2017-07-01

This paper deals with the seismic stability of the survey areas of potential sites for the deep geological repository of the spent nuclear fuel in the Czech Republic. The basic source of data for historical earthquakes up to 1990 was the seismic website [1-]. The most intense earthquake described occurred on September 15, 1590 in the Niederroesterreich region (Austria) in the historical period; its reported intensity is Io = 8-9. The source of the contemporary seismic data for the period since 1991 to the end of 2014 was the website [11]. It may be stated based on the databases and literature review that in the period from 1900, no earthquake exceeding magnitude 5.1 originated in the territory of the Czech Republic. In order to evaluate seismicity and to assess the impact of seismic effects at depths of hypothetical deep geological repository for the next time period, the neo-deterministic method was selected as an extension of the probabilistic method. Each one out of the seven survey areas were assessed by the neo-deterministic evaluation of the seismic wave-field excited by selected individual events and determining the maximum loading. Results of seismological databases studies and neo-deterministic analysis of Čihadlo locality are presented.

The radiation resistance and cobalt biosorption activity of yeast strains isolated from the Lanyu low-level radioactive waste repository in Taiwan

International Nuclear Information System (INIS)

Li, Chia-Chin; Chung, Hsiao-Ping; Wen, Hsiao-Wei; Chang, Ching-Tu; Wang, Ya-Ting; Chou, Fong-In

2015-01-01

The ubiquitous nature of microbes has made them the pioneers in radionuclides adsorption and transport. In this study, the radiation resistance and nuclide biosorption capacity of microbes isolated from the Lanyu low-level radioactive waste (LLRW) repository in Taiwan was assessed, the evaluation of the possibility of using the isolated strain as biosorbents for 60 Co and Co (II) from contaminated aqueous solution and the potential impact on radionuclides release. The microbial content of solidified waste and broken fragments of containers at the Lanyu LLRW repository reached 10 5  CFU/g. Two yeast strains, Candida guilliermondii (CT1) and Rhodotorula calyptogenae (RT1) were isolated. The radiation dose necessary to reduce the microbial count by one log cycle of CT1 and RT1 was 2.1 and 0.8 kGy, respectively. Both CT1 and RT1 can grow under a radiation field with dose rate of 6.8 Gy/h, about 100 times higher than that on the surface of the LLRW container in Lanyu repository. CT1 and RT1 had the maximum 60 Co biosorption efficiency of 99.7 ± 0.1% and 98.3 ± 0.2%, respectively in 60 Co aqueous solution (700 Bq/mL), and the 60 Co could stably retained for more than 30 days in CT 1. Nearly all of the Co was absorbed and reached equilibrium within 1 h by CT1 and RT1 in the 10 μg/g Co (II) aqueous solution. Biosorption efficiency test showed almost all of the Co (II) was adsorbed by CT1 in 20 μg/g Co (II) aqueous solution, the efficiency of biosorption by RT1 in 10 μg/g of Co (II) was lower. The maximum Co (II) sorption capacity of CT1 and RT1 was 5324.0 ± 349.0 μg/g (dry wt) and 3737.6 ± 86.5 μg/g (dry wt), respectively, in the 20 μg/g Co (II) aqueous solution. Experimental results show that microbial activity was high in the Lanyu LLRW repository in Taiwan. Two isolated yeast strains, CT1 and RT1 have high potential for use as biosorbents for 60 Co and Co (II) from contaminated aqueous solution, on the other hand, but may have the impact on

An analysis of repository waste-handling operations

International Nuclear Information System (INIS)

Dennis, A.W.

1990-09-01

This report has been prepared to document the operational analysis of waste-handling facilities at a geologic repository for high-level nuclear waste. The site currently under investigation for the geologic repository is located at Yucca Mountain, Nye County, Nevada. The repository waste-handling operations have been identified and analyzed for the year 2011, a steady-state year during which the repository receives spent nuclear fuel containing the equivalent of 3000 metric tons of uranium (MTU) and defense high-level waste containing the equivalent of 400 MTU. As a result of this analysis, it has been determined that the waste-handling facilities are adequate to receive, prepare, store, and emplace the projected quantity of waste on an annual basis. In addition, several areas have been identified where additional work is required. The recommendations for future work have been divided into three categories: items that affect the total waste management system, operations within the repository boundary, and the methodology used to perform operational analyses for repository designs. 7 refs., 48 figs., 11 tabs

Supplemental Performance Analyses for Igneous Activity and Human Intrusion at the Potential High-Level Nuclear Waste Repository at Yucca Mountain

International Nuclear Information System (INIS)

Swift, P.; Gaither, K.; Freeze, G.; McCord, J.; Kalinich, D.; Saulnier, G.; Statham, W.

2002-01-01

The U.S. Department of Energy (DOE) is considering the possible recommendation of a site at Yucca Mountain, Nevada, for the potential development of a geologic repository for the disposal of high-level radioactive waste and spent nuclear fuel. Consequences of hypothetical disruption of the Yucca Mountain site by igneous activity or human intrusion have been evaluated in the Yucca Mountain Science and Engineering Report (S and ER) (1), which presents technical information supporting the consideration of the possible site recommendation. Since completion of the S and ER, supplemental analyses have examined possible impacts of new information and alternative assumptions on the estimates of the consequences of these events. Specifically, analyses of the consequences of igneous disruption address uncertainty regarding: (1) the impacts of changes in the repository footprint and waste package spacing on the probability of disruption; (2) impacts of alternative assumptions about the appropriate distribution of future wind speeds to use in the analysis; (3) effects of alternative assumptions about waste particle sizes; and (4) alternative assumptions about the number of waste packages damaged by igneous intrusion; and (5) alternative assumptions about the exposure pathways and the biosphere dose conversion factors used in the analysis. Additional supplemental analyses, supporting the Final Environmental Impact Statement (FEIS), have examined the results for both igneous disruption and human intrusion, recalculated for a receptor group located 18 kilometers (km) from the repository (the location specified in 40 CFR 197), rather than at the 20 km distance used in the S and ER analyses

Memory provisions for the Manche Surface Repository

International Nuclear Information System (INIS)

Dumont, Jean-Noel; Espiet-Subert, Florence

2015-01-01

The French La Manche repository site received its last radioactive waste package in 1994. In 2003, the official surveillance phase of the closed repository started under the supervision of Andra (the national industrial operator), the French Nuclear Safety Authority (ASN) and society (e.g. the local municipalities). Florence Espiet explained that information on the existence of the repository, its content, how it was operated and how it works needs to be preserved. It also is planned to review the information periodically for a minimum of 300 years. She described the creation of two documents on memory (a detailed and a summary one), both on permanent paper, and the preservation of the land registration. The latter constitutes 'passive' provisions for preserving memory. In addition, a number of 'active' provisions are and will be put in place: guided visits, exhibitions, partnerships with organisations dealing with memory preservation, and the creation of a think tank. The latter consists of local citizens and politicians, retired employees from Andra and artists that meet several times a year and reflect on memory preservation from the perspective of, for instance, local history, education, arts and rituals. Finally, two types of markers will be used to preserve the repository's memory: i) three herbaria cataloguing the plants growing on the site of the repository, including a very short description of the repository, will be stored at different sites in France; ii) a stele indicating the main characteristics of the repository, potentially linked to an art work, will be erected at the repository

Framework and Challenges for Initiating Multinational Cooperation for the Development of a Radioactive Waste Repository

International Nuclear Information System (INIS)

2016-01-01

This publication is concerned with radioactive waste that requires geological disposal. It discusses the partnership arrangements necessary for the development of a multinational repository for disposal of this waste, but it also emphasizes that countries should not rely solely on a multinational solution and should in addition have coherent national plans for disposal (a dual track strategy). The publication focuses on multinational approaches based on the IAEA scenario for cooperation among countries in joint projects for the establishment of a shared geological repository. It describes the phased approach that would be needed, indicating the decision processes to be undertaken by partners in the multinational project, both within a national context and in the scope of the joint endeavour. It highlights a wide range of legal and institutional aspects, including the contractual obligations among partners, the economic and financial arrangements, liabilities, nuclear security, regulatory and legislative aspects, waste transportation arrangements, and social issues. It also addresses the uncertainties and risks involved in the implementation of a multinational repository

One-shot service searches: Preprint repositories at a mouseclick

Energy Technology Data Exchange (ETDEWEB)

Canessa, E [International Centre for Theoretical Physics, Trieste (Italy); Pastore, G [Trieste Univ., Trieste (Italy). Dipt. di Fisica

1996-09-01

In this article we introduce the ICTP-International Centre for Theoretical Physics`s prototype for a ``One-Shot World-Wide Preprints Search`` on the Web. This is a new centralized interface for a global search throughout the most popular scientific preprint repositories. Herein, we briefly discuss our experience with the implementation of this service and propose it as a possible alternative solution to the problem of getting access to the information without being either overloaded with lots of new documents or not being informed at all. (author). 13 refs, 3 figs.

One-shot service searches: Preprint repositories at a mouseclick

International Nuclear Information System (INIS)

Canessa, E.; Pastore, G.

1996-09-01

In this article we introduce the ICTP-International Centre for Theoretical Physics's prototype for a ''One-Shot World-Wide Preprints Search'' on the Web. This is a new centralized interface for a global search throughout the most popular scientific preprint repositories. Herein, we briefly discuss our experience with the implementation of this service and propose it as a possible alternative solution to the problem of getting access to the information without being either overloaded with lots of new documents or not being informed at all. (author). 13 refs, 3 figs

Safety assessment for a KBS-3H spent nuclear fuel repository at Olkiluoto. Complementary evaluations of safety

International Nuclear Information System (INIS)

Neall, Fiona; Pastina, Barbara; Snellman, Margit; Smith, Paul; Gribi, P.; Johnson, Lawrence

2008-12-01

The KBS-3H design is a variant of the more general KBS-3 method for the geological disposal of spent nuclear fuel in Finland and Sweden. In the KBS-3H design, multiple assemblies containing spent fuel are emplaced horizontally in parallel, approximately 300 m long, slightly inclined deposition drifts. The copper canisters, each with a surrounding layer of bentonite clay, are placed in perforated steel shells prior to deposition in the drifts; the assembly is called the 'supercontainer'. The other KBS-3 variant is the KBS-3V design, in which the copper canisters are emplaced vertically in individual deposition holes surrounded by bentonite clay but without steel supercontainer shells. SKB and Posiva have conducted a Research, Development and Demonstration programme over the period 2002-2007 with the overall aim of establishing whether KBS-3H represents a feasible alternative to KBS-3V. As part of this programme, the long-term safety of a KBS-3H repository has been assessed in the KBS-3H safety studies. In order to focus the safety studies, the Olkiluoto site in the municipality of Eurajoki, which is the proposed site for a spent fuel repository in Finland, was used as a hypothetical site for a KBS-3H repository. The present report is part of a portfolio of reports discussing the long-term safety of the KBS-3H repository. The overall outcome of the KBS-3H safety studies is documented in the summary report, 'Safety assessment for a KBS-3H repository for spent nuclear fuel at Olkiluoto'. The purpose and scope of the KBS-3H complementary evaluations of safety report is provided in Posiva's Safety Case Plan, which is based on Regulatory Guide YVL 8.4 and on international guidelines on complementary lines of argument to long-term safety that are considered an important element of a post-closure safety case for geological repositories. Complementary evaluations of safety require the use of evaluations, evidence and qualitative supporting arguments that lie outside the

Biospecimen repositories and cytopathology.

Science.gov (United States)

Krishnamurthy, Savitri

2015-03-01

Biospecimen repositories are important for the advancement of biomedical research. Literature on the potential for biobanking of fine-needle aspiration, gynecologic, and nongynecologic cytology specimens is very limited. The potential for biobanking of these specimens as valuable additional resources to surgically excised tissues appears to be excellent. The cervicovaginal specimens that can be used for biobanking include Papanicolaou-stained monolayer preparations and residual material from liquid-based cytology preparations. Different types of specimen preparations of fine-needle aspiration and nongynecologic specimens, including Papanicolaou-stained and Diff-Quik-stained smears, cell blocks. and dedicated passes/residual material from fine-needle aspiration stored frozen in a variety of solutions, can be used for biobanking. Because of several gaps in knowledge regarding the standard of operative procedures for the procurement, storage, and quality assessment of cytology specimens, further studies as well as national conferences and workshops are needed not only to create awareness but also to facilitate the use of cytopathology specimens for biobanking. © 2014 American Cancer Society.

Expression profiling of hypothetical genes in Desulfovibrio vulgaris leads to improved functional annotation

Energy Technology Data Exchange (ETDEWEB)

Elias, Dwayne A.; Mukhopadhyay, Aindrila; Joachimiak, Marcin P.; Drury, Elliott C.; Redding, Alyssa M.; Yen, Huei-Che B.; Fields, Matthew W.; Hazen, Terry C.; Arkin, Adam P.; Keasling, Jay D.; Wall, Judy D.

2008-10-27

Hypothetical and conserved hypothetical genes account for>30percent of sequenced bacterial genomes. For the sulfate-reducing bacterium Desulfovibrio vulgaris Hildenborough, 347 of the 3634 genes were annotated as conserved hypothetical (9.5percent) along with 887 hypothetical genes (24.4percent). Given the large fraction of the genome, it is plausible that some of these genes serve critical cellular roles. The study goals were to determine which genes were expressed and provide a more functionally based annotation. To accomplish this, expression profiles of 1234 hypothetical and conserved genes were used from transcriptomic datasets of 11 environmental stresses, complemented with shotgun LC-MS/MS and AMT tag proteomic data. Genes were divided into putatively polycistronic operons and those predicted to be monocistronic, then classified by basal expression levels and grouped according to changes in expression for one or multiple stresses. 1212 of these genes were transcribed with 786 producing detectable proteins. There was no evidence for expression of 17 predicted genes. Except for the latter, monocistronic gene annotation was expanded using the above criteria along with matching Clusters of Orthologous Groups. Polycistronic genes were annotated in the same manner with inferences from their proximity to more confidently annotated genes. Two targeted deletion mutants were used as test cases to determine the relevance of the inferred functional annotations.

Probabilistic calculations and sensitivity analysis of parameters for a reference biosphere model assessing the potential exposure of a population to radionuclides from a deep geological repository

Energy Technology Data Exchange (ETDEWEB)

Staudt, Christian; Kaiser, Jan Christian [Helmholtz Zentrum Muenchen, Institute of Radiation Protection, Munich (Germany); Proehl, Gerhard [International Atomic Energy Agency, Division of Radiation, Transport and Waste Safety, Wagramerstrasse 5, 1400 Vienna (Austria)

2014-07-01

Radioecological models are used to assess the exposure of hypothetical populations to radionuclides. Potential radionuclide sources are deep geological repositories for high level radioactive waste. Assessment time frames are long since releases from those repositories are only expected in the far future, and radionuclide migration to the geosphere biosphere interface will take additional time. Due to the long time frames, climate conditions at the repository site will change, leading to changing exposure pathways and model parameters. To identify climate dependent changes in exposure in the far field of a deep geological repository a range of reference biosphere models representing climate analogues for potential future climate states at a German site were developed. In this approach, model scenarios are developed for different contemporary climate states. It is assumed that the exposure pathways and parameters of the contemporary biosphere in the far field of the repository will change to be similar to those at the analogue sites. Since current climate models cannot predict climate developments over the assessment time frame of 1 million years, analogues for a range of realistically possible future climate conditions were selected. These climate states range from steppe to permafrost climate. As model endpoint Biosphere Dose conversion factors (BDCF) are calculated. The radionuclide specific BDCF describe the exposure of a population to radionuclides entering the biosphere in near surface ground water. The BDCF are subject to uncertainties in the exposure pathways and model parameters. In the presented work, probabilistic and sensitivity analysis was used to assess the influence of model parameter uncertainties on the BDCF and the relevance of individual parameters for the model result. This was done for the long half-live radionuclides Cs-135, I-129 and U-238. In addition to this, BDCF distributions for nine climate reference regions and several scenarios were

Hypothetical physicochemical mechanisms of some intracellular processes: The hydrate hypothesis of mitosis and DNA replication

International Nuclear Information System (INIS)

Kadyshevich, E.A.; Ostrovskii, V.E.

2007-01-01

A DNA replication, mitosis, and binary fission hydrate hypothesis (MRH hypothesis) allowing non-trivial explanations for the physicochemical mechanisms of some intracellular processes is proposed. The hypothesis has a thermodynamic basis and is initiated by original experimental calorimetric and kinetic studies of the behavior of functional organic polymer and monomer substances in highly concentrated aqueous solutions. Experimental data demonstrating the occurrence of a short-range ordering in concentrated aqueous solutions of such substances are included. Hypothetical simple non-enzymatic unified mechanisms for the natural processes of DNA local unwinding preceding the start of duplication, DNA replication, formation and disappearance of the protein bonds between sister chromatids in the centromere region of eukaryotic DNA and in the centromere-like region of prokaryotic DNA, moving of daughter chromosomes apart to the opposite sides of cells in late anaphase, and formation of the nuclear envelopes in telophase and intracellular membranes between the newly formed nuclei in cytokinesis are formulated. The nature of a number of other intracellular phenomena is discussed

Safety analysis in subsurface repositories

International Nuclear Information System (INIS)

1985-06-01

The development of mathematical models to represent the repository-geosphere-biosphere system, and the development of a structure for data acquisition, processing, and use to analyse the safety of subsurface repositories, are presented. To study the behavior of radionuclides in geosphere a laboratory to determine the hydrodynamic dispersion coefficient was constructed. (M.C.K.) [pt

Co-operation between Slovenia and Croatia in the low- and intermediate level radioactive waste repository project

International Nuclear Information System (INIS)

Schaller, A.; Lokner, V.; Subasic, D.; Zeleznik, N.; Mele, I.; Tomse, P.

2001-01-01

The paper describes the LILW repository project development in Slovenia and Croatia from the viewpoint of co-operation of national agencies for radioactive waste management - ARAO in Slovenia and APO in Croatia. The project performance, as well as the co-operation itself, are based on the fact that NPP Krsko, sited in Slovenia, is the joint venture facility of both countries, which are consequently obliged to find a proper solution for final disposal of operational and decommissioning radioactive waste generated by the plant. The main aspects of the project development in both countries, such as LILW repository site selection and characterisation, development of repository conceptual design, performance assessment/safety analysis procedures and public participation, are presented in the paper. Based on separate descriptions of the project development in Slovenia and Croatia respectively, the main aspects of co-operation between ARAO and APO are elaborated.(author)

Capturing from the start: Managing grey literature in a brand new university and enriching the institutional repository

KAUST Repository

Baessa, Mohamed A.

2014-12-09

The institutional repository became popular solutions to Capture, Preserve and Share university intellectual outputs; it had a great value on advancing scholarly communication, for both published materials such as peer reviewed article, conference paper where it is considered as an additional dissemination channel or for the best scenario as a nonrestrictive (Open Access) channels, where for the gray literature the institutional repository could be the only sharing method, and thus the gray literature could be considered as the uniqueness items that can add significant values the university repository materials. This Poster demonstrates the establishment phases of institutional repository in a brand new University. We will be discussing, the early consideration of the gray literature, success stories, difficulties, establishing different workflow, plagiarism checks, approvals , stakeholder’s involvement, establishing policy and service level agreements. The future challenges associated with grey literature, the increasing demand on different material types such as audio, video and research datasets. The skill sets required in describing gray literature materials, expertise in preserving datasets, research data expertise and continued access are going to be the challenging faces for any ETD programs in near future. Finally will wrap up with statistical of the download and viewed items of the shared grey literature materials from the repository and how that led to increase items citation.

BUILDING A GEOGRAPHIC DATA REPOSITORY FOR URBAN RESEARCH WITH FREE SOFTWARE – LEARNING FROM Observatorio.CEDEUS.cl

Directory of Open Access Journals (Sweden)

S. Steiniger

2017-07-01

Full Text Available The recent trend towards open data and open science as well as a demand for holistic and interdisciplinary research requires platforms that allow the distribution and exchange of research data, including geographic information. While the requirements and benefits of data exchange are widely discussed, there are few proposals on how to implement data platforms that not only permit the exchange of research data among researchers, but also permit to distribute research results and data to the interest public. We elaborate what points are important for implementing a (geographic data repository and propose then to adopt the concept of Spatial Data Infrastructures (SDI as a solution for the implementation of research data repositories. We present as a case study the geographic data and document repository of the Chilean research Centre on Sustainable Urban Development (CEDEUS, the CEDEUS Observatory. Besides the infrastructure to host and distribute data, communication tools are an important component of such a data repository service. For this case study we analyse which things have worked well and which things have not worked well based on the experiences collected during three years of operation. We close with some recommendations for the implementation of data repositories for research.

Open archive solutions to traditional archive/library cooperation

Directory of Open Access Journals (Sweden)

Donatella Castelli

2003-09-01

Full Text Available The diffusion of Internet is changing the role of archives and libraries and it is opening a wide range of new possibilities. The new vision is that in few years it will be possible to cross-access multiple libraries, archives, museums, and data repositories. The implementation of this revolutionary vision requires the solution of a number of technical, organizational, sociological, and economical issues. Recently, the proposal of a new, low cost technical solution for open repositories of pre-print material, the Open Archives Initiative Protocol for Metadata Harvesting ( OAI-PMH, has greatly stimulated the discussion about these issues in many application frameworks. This paper overviews the status of this discussion in the library and conventional archives frameworks.

Digital Repositories An investigation of best practices for content recruitment to academic digital repositories and the conditions for their livelihood

CERN Document Server

Hagen, Reidun Anette

2009-01-01

A digital repository is a web accessible database, aimed at preserving the research material of an institution or scientific community. A digital repository serves as a tool for dissemination of research material and can increase the impact of the research by making it freely accessible. Digital repositories are often mentioned as a possible aid in relation to the Open Access debate; how research material should be freely accessible to anyone, anywhere at any time. However, for a digital repository to fully unleash its potential as a crucial component of Open Access, it is reliant on the ability to successfully collect and organize content. To a large extent this involves initiating self-archiving of research material by scientists throughout the academic world. This is not a trivial task, and many current repositories are inadequate in this respect, remaining empty, unvisited shelves. This thesis explores best practices for content recruitment to digital repositories, through the review of literature, and an...

Processing counterfactual and hypothetical conditionals: an fMRI investigation.

Science.gov (United States)

Kulakova, Eugenia; Aichhorn, Markus; Schurz, Matthias; Kronbichler, Martin; Perner, Josef

2013-05-15

Counterfactual thinking is ubiquitous in everyday life and an important aspect of cognition and emotion. Although counterfactual thought has been argued to differ from processing factual or hypothetical information, imaging data which elucidate these differences on a neural level are still scarce. We investigated the neural correlates of processing counterfactual sentences under visual and aural presentation. We compared conditionals in subjunctive mood which explicitly contradicted previously presented facts (i.e. counterfactuals) to conditionals framed in indicative mood which did not contradict factual world knowledge and thus conveyed a hypothetical supposition. Our results show activation in right occipital cortex (cuneus) and right basal ganglia (caudate nucleus) during counterfactual sentence processing. Importantly the occipital activation is not only present under visual presentation but also with purely auditory stimulus presentation, precluding a visual processing artifact. Thus our results can be interpreted as reflecting the fact that counterfactual conditionals pragmatically imply the relevance of keeping in mind both factual and supposed information whereas the hypothetical conditionals imply that real world information is irrelevant for processing the conditional and can be omitted. The need to sustain representations of factual and suppositional events during counterfactual sentence processing requires increased mental imagery and integration efforts. Our findings are compatible with predictions based on mental model theory. Copyright © 2013 Elsevier Inc. All rights reserved.

Swiss underground L/ILW repository at Wellenberg: How to proceed following the negative vote of the Canton

International Nuclear Information System (INIS)

Kowalski, E.; Fritschi, M.

1996-01-01

In Switzerland, the process of implementing a low- and intermediate-level waste repository is entering a crucial phase. Progress has been made in the technical and partly also in the political field. After extended investigations, the site of Wellenberg in Canton Nidwalden was selected in June 1993, followed by the submission of an application for a general license to the Swiss Federal Government in June 1994. The general license is only the first step in a comprehensive licensing procedure which consists of federal, cantonal and community licenses. In addition to the > licenses, a special mining concession must be applied for to the Canton, since the repository is considered as a facility which may interfere with hypothetical future mining projects and this falls within the jurisdiction of the Canton. In Canton Nidwalden, the mining concession can only be granted by a vote of the population. The people of the siting community of Wolfenschiessen previously agreed to host the company responsible for constructing and operating the repository (Nuclear Waste Management Cooperative Wellenberg - GNW) by a 63 % affirmative vote. Equally, the necessary community zone planning has been adapted by a 70 % affirmative vote. Unfortunately, the decisive cantonal vote on 25th June 1995 regarding the mining concession was negative by 52.5 %. This created a politically difficult situation, especially with regard to the Federal Government which does not believe that a geologically suitable site should be rejected for political reasons. This paper briefly covers the results of the site selection procedure and the characteristics of the selected site of Wellenberg, as well as the procedure applied to enhance project acceptance. It analyses the reasons for the negative cantonal vote and describes the measures taken to cope with the new situation

Natural analogues, paradigm for manmade repositories for radioactive wastes

International Nuclear Information System (INIS)

Pavelescu, M.; Pavelescu, A.

2004-01-01

Natural analogues are given by nature. They show the results of natural processes which have lasted thousands or millions of years. They provide an excellent example of what could happen in an underground site, offering in the same time the opportunity to test by observation and measurement, many of the geochemical processes that are expected to influence in a realistic and appropriate way, the predicted reliability of the radioactive waste repository over long periods of geological time. The natural analogue studies attempt to understand the multiprocessing complexity of the natural system, which contrasts with the limitations of the laboratory experiments and bring arguments to overcome the difficult time scale issue. By this the natural analogues are a useful paradigm for manmade repository for radioactive wastes. The paper discusses the implicit link in the public mind between natural analogues and manmade waste repository with an accent of the positive impact on public acceptance. It is also discussed the decisive qualities of the natural analogues concerning providing valid long term data and increasing the confidence of the public for manmade repositories. The debate is conducting in terms of sustainable development, having at base high-level principles in order to protect humans and their environment, both now and in the future, from potential hazards arising from such wastes. Safe radwaste management involves the application of technology and resources in a regulated manner so that the public, workers and the environment are protected in accordance with the accepted national and international standards. There are at least seven high-level principles which are mentioned in the paper. It is presented the general concept of the deep geological repository, very important for an acceptable solution for the management of nuclear waste, what is a prerequisite for a renewal of nuclear power. Further are introduced natural and archaeological (manufactured) analogue

Identification of the conserved hypothetical protein BPSL0317 in Burkholderia pseudomallei K96243

Science.gov (United States)

Yusoff, Nur Syamimi; Damiri, Nadzirah; Firdaus-Raih, Mohd

2014-09-01

Burkholderia pseudomallei K96243 is the causative agent of melioidosis, a disease which is endemic in Northern Australia and Southeastern Asia. The genome encodes several essential proteins including those currently annotated as hypothetical proteins. We studied the conservation and the essentiality of expressed hypothetical proteins in normal and different stress conditions. Based on the comparative genomics, we identified a hypothetical protein, BPSL0317, a potential essential gene that is being expressed in all normal and stress conditions. BPSL0317 is also phylogenetically conserved in the Burkholderiales order suggesting that this protein is crucial for survival among the order's members. BPSL0317 therefore has a potential to be a candidate antimicrobial drug target for this group of bacteria.

Building Scientific Data's list of recommended data repositories

Science.gov (United States)

Hufton, A. L.; Khodiyar, V.; Hrynaszkiewicz, I.

2016-12-01

When Scientific Data launched in 2014 we provided our authors with a list of recommended data repositories to help them identify data hosting options that were likely to meet the journal's requirements. This list has grown in size and scope, and is now a central resource for authors across the Nature-titled journals. It has also been used in the development of data deposition policies and recommended repository lists across Springer Nature and at other publishers. Each new addition to the list is assessed according to a series of criteria that emphasize the stability of the resource, its commitment to principles of open science and its implementation of relevant community standards and reporting guidelines. A preference is expressed for repositories that issue digital object identifiers (DOIs) through the DataCite system and that share data under the Creative Commons CC0 waiver. Scientific Data currently lists fourteen repositories that focus on specific areas within the Earth and environmental sciences, as well as the broad scope repositories, Dryad and figshare. Readers can browse and filter datasets published at the journal by the host repository using ISA-explorer, a demo tool built by the ISA-tools team at Oxford University1. We believe that well-maintained lists like this one help publishers build a network of trust with community data repositories and provide an important complement to more comprehensive data repository indices and more formal certification efforts. In parallel, Scientific Data has also improved its policies to better support submissions from authors using institutional and project-specific repositories, without requiring each to apply for listing individually. Online resources Journal homepage: http://www.nature.com/scientificdata Data repository criteria: http://www.nature.com/sdata/policies/data-policies#repo-criteria Recommended data repositories: http://www.nature.com/sdata/policies/repositories Archived copies of the list: https

Radioactive Waste Repositories and Incentives to Local Communities

International Nuclear Information System (INIS)

Knapp, A.; Medakovic, S.

2008-01-01

Public acceptance of radioactive waste (RW) repository depends on various and often community-specific factors. Although radiological risk from a properly constructed low and intermediate level waste (LILW) repository is practically negligible, routine safety considerations will favor low populated areas and therefore probably underdeveloped communities. Repository acceptance in such communities is more likely to be facilitated by prospective benefits to local economy, such as infrastructure development and increased employment, as well as by dedicated financial incentives to the community. Direct financial compensation to the local community for acceptance of the repository has been considered in some documents in countries experienced in RW management, but it has not become a widely accepted practice. In Croatia, a possibility for such compensation is mentioned in the land use plan in conjunction with the prospective RW repository site. In Slovenia, the government has already specified the annual amount of 2.33 million euro as a compensation for 'limited land use' to be shared by local communities in the vicinity of the planned LILW repository during its operation. Applicability of the Slovenian compensations to the prospective joint Slovenian-Croatian repository is not yet clear, at least in the aspect of joint funding. The joint Slovenian-Croatian Decommissioning and LILW and SF management program for NPP Krsko from 2004 did conservatively include the compensations into the repository cost estimates, but that might not be retained in subsequent revisions of the Program. According to the agreement between governments of Slovenia and Croatia on the Nuclear power plant Krsko, Croatian side has no obligations to participate in 'public expenditures' introduced after the agreement, as would be the case of community compensations for LILW repository in Slovenia. Before further decisions on joint NPP Krsko waste management are made, including the issue of LILW

Use of virtual reality for the development of a nuclear waste repository for training

International Nuclear Information System (INIS)

Avellar, Ricardo Fernandes de; Mól, Antônio Carlos A.; Machado, Daniel Mol; Santo, André Cotelli do E.; Legey, Ana Paula

2017-01-01

In Brazil the highest amount of waste generated is low and medium level of radiation. Its management and final destination is important for society and the solution, proposed by the government, involves the construction of a National Repository for Radioactive Waste. Using Virtual Reality (VR), this article aims to develop an interactive virtual model of the repository to assist in the study, evaluation, training of personnel and planning of the installation to be implemented. The method was divided into four steps. The first, called 'Requirements Specification and Survey', aimed at acquiring information about the terrain and future buildings of the installation in the real world. The next step, known as 'Modeling the Environment' is the construction of the virtual environment itself according to the specifications of the previous method. The third, called 'Functionality Implementation' consists of inserting functionalities into the system, such as performing some tasks present in the repository. Finally, the last step is the interactive virtual model of the national repository for radioactive waste, with this tool users can study, evaluate and train conditions/situations of the installation. In conclusion, the results have shown that the tool presented in this work is a possible application of the VR for dissemination and training in nuclear installations. Using this tool, users can visualize and plan strategies to be carried out in a repository, without interrupting the operation of the installation. It can be used for training and operations simulations, aiming to improve the processes without exposing the operators to the radiation. (author)

Use of virtual reality for the development of a nuclear waste repository for training

Energy Technology Data Exchange (ETDEWEB)

Avellar, Ricardo Fernandes de; Mól, Antônio Carlos A.; Machado, Daniel Mol, E-mail: ricardo.arq2017@gmail.com, E-mail: mol@ien.gov.br, E-mail: machado.mol@gmail.com [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Santo, André Cotelli do E.; Legey, Ana Paula, E-mail: cotelli.andre@gmail.com [Centro Universitário Carioca (UniCarioca), Rio de Janeiro, RJ (Brazil)

2017-07-01

In Brazil the highest amount of waste generated is low and medium level of radiation. Its management and final destination is important for society and the solution, proposed by the government, involves the construction of a National Repository for Radioactive Waste. Using Virtual Reality (VR), this article aims to develop an interactive virtual model of the repository to assist in the study, evaluation, training of personnel and planning of the installation to be implemented. The method was divided into four steps. The first, called 'Requirements Specification and Survey', aimed at acquiring information about the terrain and future buildings of the installation in the real world. The next step, known as 'Modeling the Environment' is the construction of the virtual environment itself according to the specifications of the previous method. The third, called 'Functionality Implementation' consists of inserting functionalities into the system, such as performing some tasks present in the repository. Finally, the last step is the interactive virtual model of the national repository for radioactive waste, with this tool users can study, evaluate and train conditions/situations of the installation. In conclusion, the results have shown that the tool presented in this work is a possible application of the VR for dissemination and training in nuclear installations. Using this tool, users can visualize and plan strategies to be carried out in a repository, without interrupting the operation of the installation. It can be used for training and operations simulations, aiming to improve the processes without exposing the operators to the radiation. (author)

GRS/ISTec strategy for the treatment of gas-related issues for repositories located in rock salt

International Nuclear Information System (INIS)

Muller-Lyda, I.; Javeri, V.; Muller, W.

2001-01-01

The treatment of gas-related issues for repositories located in rock salt by GRS and ISTec has followed a strategy which has been developed with increasing complexity and degree of detail in the past. The strategy today clearly indicates the direction to establish a comprehensive safety case and the work that remains to be done. For gas generation mainly long-term aspects are an issue to increase accuracy of predictions. Physical modelling especially for HLW is still incomplete with regard to the coupling of fluid flow with geomechanics, solution/precipitation effects and geochemistry. The appropriate tools to transform the physical models into numerical solutions are at hand in principle but have to be further developed collaterally to the physical modelling. The first full-scale demonstration of safety regarding gas issues in rock salt will have to be provided for the licensing of the Morsleben repository shut-down in the near future. (authors)

Modeling the impact of climate change in Germany with biosphere models for long-term safety assessment of nuclear waste repositories.

Science.gov (United States)

Staudt, C; Semiochkina, N; Kaiser, J C; Pröhl, G

2013-01-01

Biosphere models are used to evaluate the exposure of populations to radionuclides from a deep geological repository. Since the time frame for assessments of long-time disposal safety is 1 million years, potential future climate changes need to be accounted for. Potential future climate conditions were defined for northern Germany according to model results from the BIOCLIM project. Nine present day reference climate regions were defined to cover those future climate conditions. A biosphere model was developed according to the BIOMASS methodology of the IAEA and model parameters were adjusted to the conditions at the reference climate regions. The model includes exposure pathways common to those reference climate regions in a stylized biosphere and relevant to the exposure of a hypothetical self-sustaining population at the site of potential radionuclide contamination from a deep geological repository. The end points of the model are Biosphere Dose Conversion factors (BDCF) for a range of radionuclides and scenarios normalized for a constant radionuclide concentration in near-surface groundwater. Model results suggest an increased exposure of in dry climate regions with a high impact of drinking water consumption rates and the amount of irrigation water used for agriculture. Copyright © 2012 Elsevier Ltd. All rights reserved.

Radiological consequences associated with human intrusion into radioactive waste repositories in salt formations

International Nuclear Information System (INIS)

Jacquier, P.

1989-01-01

The assessment of the radiological impact of human intrusion scenarios is extremely important in the case of repositories located in salt formations, since salt is obviously a valuable economic resource. Salt formations also represent a suitable medium for mining storage caverns for oil and gas. The scenario considered in this report is that of solution mining in salt formations to produce salt for human consumption. It is postulated that the salt is extracted by excavating a cavern through solution-mining and that, in the course of cavern enlargement, the waste is intercepted and drops to the bottom of the cavern. We have assumed that the intrusion takes place 500 or even 2 500 years after the repository has been sealed. The cases considered involve high-level vitrified waste or cemented alpha waste. The paper describes the assumptions on which the scenario is based and uses a simplified model to assess the radiological consequences associated with the ingestion of contaminated salt. The paper also provides details of a sensitivity/uncertainty analysis which identified several areas in which experimental studies should be either initiated or continued [fr

Summary of United States Geological Survey investigations of fluid-rock-waste reactions in evaporite environments under repository conditions

International Nuclear Information System (INIS)

Stewart, D.B.; Jones, B.F.; Roedder, E.; Potter, R.W. II

1980-01-01

The interstitial and inclusion fluids contained in rock salt and anhydrite, though present in amounts less than 1 weight per cent, are chemically aggressive and may react with canisters or wastes. The three basic types of fluids are: (1) bitterns residual from saline mineral precipitation including later recrystallization reactions; (2) brines containing residual solutes from the formation of evaporite that have been extensively modified by reactions with contiguous carbonate of clastic rocks; and (3) re-solution brines resulting from secondary dehydration of evaporite minerals or solution of saline minerals by undersaturated infiltrating waters. Fluid composition can indicate that meteoric flow systems have contacted evaporites or that fluids from evaporites have migrated into other formations. The movement of fluids trapped in fluid inclusions in salt from southeast New Mexico is most sensitive to ambient temperature and to inclusion size, although several other factors such as thermal gradient and vapour/liquid ratio are also important. There is no evidence of a threshold temperature for movement of inclusions. Empirical data are given for determining the amount of brine reaching the heat source if the temperature, approximate amount of total dissolved solids, and Ca:Mg ratio in the brine are known. SrCl 2 and CsCl can reach high concentrations in saturated NaCl solutions and greatly depress the liquidus. The possibility that such fluids, if generated, could migrate from a high-level waste repository must be minimized because the fluid would contain its own radiogenic energy source in the first decades after repository closure, thus changing the thermal evolution of the repository from designed values. (author)

Mathematical modelling of heat production in deep geological repository of high-level nuclear waste

International Nuclear Information System (INIS)

Kovanda, O.

2017-01-01

Waste produced by nuclear industry requires special handling. Currently, there is a research taking place, focused at possibilities of nuclear waste storage in deep geological repositories, hosted in stable geological environment. The high-level nuclear waste produces significant amount of heat for a long time, which can affect either environment outside of or within the repository in a negative way. Therefore to reduce risks, it is desirable to know the principles of such heat production, which can be achieved using mathematical modeling. This thesis comes up with a general model of heat production-time dependency, dependable on initial composition of the waste. To be able to model real situations, output of this thesis needs to be utilized in an IT solution. (authors)

Stress corrosion cracking tests on high-level-waste container materials in simulated tuff repository environments

International Nuclear Information System (INIS)

Abraham, T.; Jain, H.; Soo, P.

1986-06-01

Types 304L, 316L, and 321 austenitic stainless steel and Incoloy 825 are being considered as candidate container materials for emplacing high-level waste in a tuff repository. The stress corrosion cracking susceptibility of these materials under simulated tuff repository conditions was evaluated by using the notched C-ring method. The tests were conducted in boiling synthetic groundwater as well as in the steam/air phase above the boiling solutions. All specimens were in contact with crushed Topopah Spring tuff. The investigation showed that microcracks are frequently observed after testing as a result of stress corrosion cracking or intergranular attack. Results showing changes in water chemistry during test are also presented

Management of radioactive waste at Novi Han Repository

International Nuclear Information System (INIS)

Stefanova, I.G.; Mateeva, M.D.; Milanov, M.V.

2002-01-01

The Novi Han Repository is the only existing repository in Bulgaria for the disposal of radioactive waste from nuclear applications in industry, medicine and research. The repository was constructed in the early sixties according to the existing requirements. It was operated by the Institute for Nuclear Research and Nuclear Energy for more than thirty years without any accident or release of radioactivity to the environment, but without any investment for upgrading. As a consequence, the Bulgarian Nuclear Safety Authority temporarily stopped the operation of the repository in 1994. The measures for upgrading the Novi Han Repository, supported by the IAEA under TC Project BUL/4/005 'Increasing Safety of Novi Han Repository', are presented in this paper. They comprise: assessment of radionuclide inventory and future waste arisings, characterisation of disposal vaults, characterisation of the site, safety assessment, upgrading of the monitoring system, option study for the selection of treatment and conditioning processes and the development of a conceptual design for low and intermediate level waste processing and storage facility, immediate measures for improvement of the existing disposal vaults and infrastructure, construction of above-ground temporary storage structures, and resuming the operation of the Novi Han Repository. The necessary activities for re-licensing of the Novi Han Repository, construction of a waste processing and storage facility and a disposal facility for spent sealed sources are discussed. (author)

CAED Document Repository

Data.gov (United States)

U.S. Environmental Protection Agency — Compliance Assurance and Enforcement Division Document Repository (CAEDDOCRESP) provides internal and external access of Inspection Records, Enforcement Actions, and...

The radiation resistance and cobalt biosorption activity of yeast strains isolated from the Lanyu low-level radioactive waste repository in Taiwan.

Science.gov (United States)

Li, Chia-Chin; Chung, Hsiao-Ping; Wen, Hsiao-Wei; Chang, Ching-Tu; Wang, Ya-Ting; Chou, Fong-In

2015-08-01

The ubiquitous nature of microbes has made them the pioneers in radionuclides adsorption and transport. In this study, the radiation resistance and nuclide biosorption capacity of microbes isolated from the Lanyu low-level radioactive waste (LLRW) repository in Taiwan was assessed, the evaluation of the possibility of using the isolated strain as biosorbents for (60)Co and Co (II) from contaminated aqueous solution and the potential impact on radionuclides release. The microbial content of solidified waste and broken fragments of containers at the Lanyu LLRW repository reached 10(5) CFU/g. Two yeast strains, Candida guilliermondii (CT1) and Rhodotorula calyptogenae (RT1) were isolated. The radiation dose necessary to reduce the microbial count by one log cycle of CT1 and RT1 was 2.1 and 0.8 kGy, respectively. Both CT1 and RT1 can grow under a radiation field with dose rate of 6.8 Gy/h, about 100 times higher than that on the surface of the LLRW container in Lanyu repository. CT1 and RT1 had the maximum (60)Co biosorption efficiency of 99.7 ± 0.1% and 98.3 ± 0.2%, respectively in (60)Co aqueous solution (700 Bq/mL), and the (60)Co could stably retained for more than 30 days in CT 1. Nearly all of the Co was absorbed and reached equilibrium within 1 h by CT1 and RT1 in the 10 μg/g Co (II) aqueous solution. Biosorption efficiency test showed almost all of the Co (II) was adsorbed by CT1 in 20 μg/g Co (II) aqueous solution, the efficiency of biosorption by RT1 in 10 μg/g of Co (II) was lower. The maximum Co (II) sorption capacity of CT1 and RT1 was 5324.0 ± 349.0 μg/g (dry wt) and 3737.6 ± 86.5 μg/g (dry wt), respectively, in the 20 μg/g Co (II) aqueous solution. Experimental results show that microbial activity was high in the Lanyu LLRW repository in Taiwan. Two isolated yeast strains, CT1 and RT1 have high potential for use as biosorbents for (60)Co and Co (II) from contaminated aqueous solution, on the other hand, but may have the

Selection of Corrosion Resistant Materials for Nuclear Waste Repositories

International Nuclear Information System (INIS)

R.B. Rebak

2006-01-01

Several countries are considering geological repositories to dispose of nuclear waste. The environment of most of the currently considered repositories will be reducing in nature, except for the repository in the US, which is going to be oxidizing. For the reducing repositories, alloys such as carbon steel, stainless steels and titanium are being evaluated. For the repository in the US, some of the most corrosion resistant commercially available alloys are being investigated. This paper presents a summary of the behavior of the different materials under consideration for the repositories and the current understanding of the degradation modes of the proposed alloys in ground water environments from the point of view of general corrosion, localized corrosion and environmentally assisted cracking

Numerical modeling of magma-repository interactions

NARCIS (Netherlands)

Bokhove, Onno

2001-01-01

This report explains the numerical programs behind a comprehensive modeling effort of magma-repository interactions. Magma-repository interactions occur when a magma dike with high-volatile content magma ascends through surrounding rock and encounters a tunnel or drift filled with either a magmatic

Metadata Quality in Institutional Repositories May be Improved by Addressing Staffing Issues

Directory of Open Access Journals (Sweden)

Elizabeth Stovold

2016-09-01

selection. The majority of repositories used locally established standards (61%, n=11. When asked about obstacles to metadata quality, the majority identified time and staff hours (85%, n=17 as a barrier, as well as repository software (60%, n=12. When the responses to questions about obstacles to quality were tabulated with the responses to quality rating, time limitations and staff hours came out as the top or joint-top answer, regardless of the quality rating. Finally, the authors present a sample of responses to the question on how metadata could be improved and these offer some solutions to staffing issues, the application of standards, and the repository system in use. Conclusion – The authors conclude that staffing, standards, and systems are all concerns in providing quality metadata. However, they suggest that standards and software issues could be overcome if adequate numbers of qualified staff are in place.

FASTREACT – An efficient numerical framework for the solution of reactive transport problems

International Nuclear Information System (INIS)

Trinchero, Paolo; Molinero, Jorge; Román-Ross, Gabriela; Berglund, Sten; Selroos, Jan-Olof

2014-01-01

Highlights: • We present a tool for the efficient solution of reactive transport problems. • The tool is used to simulate radionuclide transport in a two-dimensional medium. • The results are successfully compared with those obtained using an Eulerian approach. • A large-scale application example is also solved. • The results show that the proposed tool can efficiently solve large-scale models. - Abstract: In the framework of safety assessment studies for geological disposal, large scale reactive transport models are powerful inter-disciplinary tools aiming at supporting regulatory decision making as well as providing input to repository engineering activities. Important aspects of these kinds of models are their often very large temporal and spatial modelling scales and the need to integrate different non-linear processes (e.g., mineral dissolution and precipitation, adsorption and desorption, microbial reactions and redox transformations). It turns out that these types of models may be computationally highly demanding. In this work, we present a Lagrangian-based framework, denoted as FASTREACT, that aims at solving multi-component-reactive transport problems with a computationally efficient approach allowing complex modelling problems to be solved in large spatial and temporal scales. The tool has been applied to simulate radionuclide migration in a synthetic heterogeneous transmissivity field and the results have been successfully compared with those obtained using a standard Eulerian approach. Finally, the same geochemical model has been coupled to an ensemble of realistic three-dimensional transport pathways to simulate the migration of a set of radionuclides from a hypothetical repository for spent nuclear fuel to the surface. The results of this modelling exercise, which includes key processes such as the exchange of mass between the conductive fractures and the matrix, show that FASTREACT can efficiently solve large-scale reactive transport models

Repository performance confirmation

International Nuclear Information System (INIS)

Hansen, Francis D.

2011-01-01

Repository performance confirmation links the technical bases of repository science and societal acceptance. This paper explores the myriad aspects of what has been labeled performance confirmation in U.S. programs, which involves monitoring as a collection of distinct activities combining technical and social significance in radioactive waste management. This paper is divided into four parts: (1) A distinction is drawn between performance confirmation monitoring and other testing and monitoring objectives; (2) A case study illustrates confirmation activities integrated within a long-term testing and monitoring strategy for Yucca Mountain; (3) A case study reviews compliance monitoring developed and implemented for the Waste Isolation Pilot Plant; and (4) An approach for developing, evaluating and implementing the next generation of performance confirmation monitoring is presented. International interest in repository monitoring is exhibited by the European Commission Seventh Framework Programme 'Monitoring Developments for Safe Repository Operation and Staged Closure' (MoDeRn) Project. The MoDeRn partners are considering the role of monitoring in a phased approach to the geological disposal of radioactive waste. As repository plans advance in different countries, the need to consider monitoring strategies within a controlled framework has become more apparent. The MoDeRn project pulls together technical and societal experts to assimilate a common understanding of a process that could be followed to develop a monitoring program. A fundamental consideration is the differentiation of confirmation monitoring from the many other testing and monitoring activities. Recently, the license application for Yucca Mountain provided a case study including a technical process for meeting regulatory requirements to confirm repository performance as well as considerations related to the preservation of retrievability. The performance confirmation plan developed as part of the

The Lincoln Repository presentation: ten reasons why you should put a copy of your work in the Repository

OpenAIRE

Stainthorp, Paul

2010-01-01

Slideshow presentation created to promote the Lincoln Repository to staff at the University of Lincoln. Consists of ten reasons why academic authors should consider depositing copies of their work in the Repository.

International perspective on repositories for low level waste

International Nuclear Information System (INIS)

Bergstroem, Ulla; Pers, Karin; Almen, Ylva

2011-12-01

Nuclear energy production gives rise to different types of radioactive waste. The use of nuclear isotopes within the research, industry and medical sectors also generates radioactive waste. To protect man and the environment from radiation the waste is isolated and contained by deposition in repositories. These repositories may have various designs regarding location, barriers etc depending on the potential danger of the waste. In Sweden, low- and intermediate level waste (LILW) is disposed of in the SFR repository in Forsmark. The repository is located 60 metres down into the bedrock under the bottom of the sea and covered by 6 metres of water. It is planned to extend SFR to accommodate decommissioning waste from the dismantling of the Swedish nuclear power facilities and also for the additional operation waste caused by the planned prolonged operation time. When planning the extension consultations will be carried out with the host municipality, authorities, organisations and general public. In planning the extension, SKB has performed a worldwide compilation of how other countries have, or plan to, handle the final disposal of similar wastes. The aim of this report is to give a brief description of LILW repositories worldwide; including general brief descriptions of many facilities, descriptions of the waste and the barriers as well as safety assessments for a few chosen repositories which represent different designs. The latter is performed, where possible, to compare certain features against the Swedish SFR. To provide a background and context to this study, international organisations and conventions are also presented along with internationally accepted principles regarding the management of radioactive waste. Similar to SFR, suitable locations for the repositories have, in many countries, been found at sites that already have, or used to have nuclear activities, such as reactor sites. Abandoned and disused mines, such as the salt mines in Germany, also

International perspective on repositories for low level waste

Energy Technology Data Exchange (ETDEWEB)

Bergstroem, Ulla; Pers, Karin; Almen, Ylva (SKB International AB (Sweden))

2011-12-15

Nuclear energy production gives rise to different types of radioactive waste. The use of nuclear isotopes within the research, industry and medical sectors also generates radioactive waste. To protect man and the environment from radiation the waste is isolated and contained by deposition in repositories. These repositories may have various designs regarding location, barriers etc depending on the potential danger of the waste. In Sweden, low- and intermediate level waste (LILW) is disposed of in the SFR repository in Forsmark. The repository is located 60 metres down into the bedrock under the bottom of the sea and covered by 6 metres of water. It is planned to extend SFR to accommodate decommissioning waste from the dismantling of the Swedish nuclear power facilities and also for the additional operation waste caused by the planned prolonged operation time. When planning the extension consultations will be carried out with the host municipality, authorities, organisations and general public. In planning the extension, SKB has performed a worldwide compilation of how other countries have, or plan to, handle the final disposal of similar wastes. The aim of this report is to give a brief description of LILW repositories worldwide; including general brief descriptions of many facilities, descriptions of the waste and the barriers as well as safety assessments for a few chosen repositories which represent different designs. The latter is performed, where possible, to compare certain features against the Swedish SFR. To provide a background and context to this study, international organisations and conventions are also presented along with internationally accepted principles regarding the management of radioactive waste. Similar to SFR, suitable locations for the repositories have, in many countries, been found at sites that already have, or used to have nuclear activities, such as reactor sites. Abandoned and disused mines, such as the salt mines in Germany, also

Data repositories for medical education research: issues and recommendations.

Science.gov (United States)

Schwartz, Alan; Pappas, Cleo; Sandlow, Leslie J

2010-05-01

The authors explore issues surrounding digital repositories with the twofold intention of clarifying their creation, structure, content, and use, and considering the implementation of a global digital repository for medical education research data sets-an online site where medical education researchers would be encouraged to deposit their data in order to facilitate the reuse and reanalysis of the data by other researchers. By motivating data sharing and reuse, investigators, medical schools, and other stakeholders might see substantial benefits to their own endeavors and to the progress of the field of medical education.The authors review digital repositories in medicine, social sciences, and education, describe the contents and scope of repositories, and present extant examples. The authors describe the potential benefits of a medical education data repository and report results of a survey of the Society for Directors of Research in Medicine Education, in which participants responded to questions about data sharing and a potential data repository. Respondents strongly endorsed data sharing, with the caveat that principal investigators should choose whether or not to share data they collect. A large majority believed that a repository would benefit their unit and the field of medical education. Few reported using existing repositories. Finally, the authors consider challenges to the establishment of such a repository, including taxonomic organization, intellectual property concerns, human subjects protection, technological infrastructure, and evaluation standards. The authors conclude with recommendations for how a medical education data repository could be successfully developed.

Implementation of the Brazilian national repository

International Nuclear Information System (INIS)

Tello, Cledola Cassia Oliveira de

2013-01-01

Ionizing radiation in Brazil is used in electricity generation, medicine, industry, agriculture and for research and development purposes. All these activities can generate radioactive waste. At this point, in Brazil, the use of nuclear energy and radioisotopes justifies the construction of a national repository for radioactive wastes of low and intermediate-level. According to Federal Law No. 10308, Brazilian National Commission for Nuclear Energy (CNEN) is responsible for designing and constructing the intermediate and final storages for radioactive wastes. Additionally, a restriction on the construction of Angra 3 is that the repository is under construction until its operation start, attaining some requirements of the Brazilian Environmental Regulator (IBAMA). The RBMN Project (Repository for Low and Intermediate-Level Radioactive Wastes) aims at the implantation of a National Repository for disposal of low and intermediate-level of radiation wastes. This Project has some aspects that are unique in the Brazilian context, especially referring to the time between its construction and the end of its institutional period. This time is about 360 years, when the area will be released for unrestricted uses. It means that the Repository must be safe and secure for more than three hundred years, which is longer than half of the whole of Brazilian history. This aspect is very new for the Brazilian people, bringing a new dimension to public acceptance. Another point is this will be the first repository in South America, bringing a real challenge for the continent. The current status of the Project is summarized. (author)

Development of a methodology for post closure radiological risk analysis of underground waste repositories. Illustrative assessment of the Harwell site. V.1

International Nuclear Information System (INIS)

Gralewski, Z.A.; Kane, P.; Nicholls, D.B.

1987-06-01

A probabilistic risk analysis (pra) is demonstrated for a number of ground water mediated release scenarios at the Harwell Site for a hypothetical repository at a depth of about 150 metres. This is the second stage of development of an overall risk assessment methodology. A procedure for carrying out multi-scenario assessment using available probabilistic risk assessment (pra) models is presented and a general methodology for combining risk contributions is outlined. Appropriate levels of model complexity in pra are discussed. Modelling requirements for the treatment of multiple simultaneous pathways and of site evolution are outlined. Further developments of pra systems are required to increase the realism of both the models and their mode of application, and hence to improve estimates of risk. (author)

The development of safeguards for geological repositories

International Nuclear Information System (INIS)

Van der Meer, K.

2009-01-01

Traditionally, research and development on geological repositories for High Level Waste (HLW) focuses on the short- and long-term safety aspects of the repository. If the repository will also be used for the disposal of spent fuel, safeguards aspects have to be taken into account. Safety and safeguards requirements may be contradictory; the safety of a geological repository is based on the non-intrusion of the geological containment, while safeguards require regular inspections of position and amount of the spent fuel. Examples to reconcile these contradictory requirements are the use of information required for the safety assessment of the geological repository for safeguards purposes and the adaptation of the safeguards approach to use non-intrusive inspection techniques. The principles of an inspection approach for a geological repository are now generally accepted within the IAEA. The practical applicability of the envisaged inspection techniques is still subject to investigation. It is specifically important for the Belgian situation that an inspection technique can be used in clay, the geological medium in which Belgium intends to dispose its HLW and spent fuel. The work reported in this chapter is the result of an international cooperation in the framework of the IAEA, in which SCK-CEN participates

Investigative study of standards for digital repositories and related services

CERN Document Server

Foulonneau, Muriel; Badolato, Anne-Marie

2008-01-01

This study is meant for institutional repository managers, service providers, repository software developers and generally, all players taking an active part in the creation of the digital repository infrastructure for e-research and e-learning. It reviews the current standards, protocols and applications in the domain of digital repositories. Special attention is being paid to the interoperability of repositories to enhance the exchange of data in repositories. It aims to stimulate discussion about these topics and supports initiatives for the integration of and, where needed, development of

Refinancing of the search for a repository and of the repository for heat generating radioactive Waste. Pt. 2

International Nuclear Information System (INIS)

Moench, Christoph

2013-01-01

Part I of this article, which appeared in the preceding issue, described in general terms the background to the search for a disposal site and the result of the exploration to date of the repository, which would appear to be suitable from a mining standpoint according to the present knowledge. According to the rules in effect up to now, the exploration and construction would be financed by advance payments on the contributions of the waste producing companies, in particular the utility companies. The working draft of an 'Act on the search for and selection of a site for a repository for heat generating radioactive waste' (Gesetz zur Suche und Auswahl eines Standortes fuer ein Endlager fuer waermeentwickelnde radioaktive Abfaelle) from autumn 2012 provides for a new version of section 21b Atomic Energy Act, under which the costs for 'carrying out a repository selection procedure pursuant to the Repository Selection Act (Standort-auswahlgesetz)' would be allocated to the future users of the repository who are obliged to make contributions as a 'necessary expense'. Part II evaluates this provision of the working draft on the basis of the financial constitutional law. A comparison of sites is not a measure that could be allocated to the future users of the repository who are obliged to make contributions as a 'necessary expense'. Moreover, there is a lack of responsibility for the financing and of a legally relevant advantage that would be conferred by a cumulative alternative repository search for the later users of the repository who are obliged to provide the pre-financing. The costs can therefore not be allocated to the later users as either a contribution or a special charge, not even by way of an association with mandatory membership (Zwangsverband). They must be borne by the state. Consequently, the allocation stipulated by provision would constitute an impermissible charge under financial constitutional law. (orig.)

Institutional Repositories as Infrastructures for Long-Term Preservation

Science.gov (United States)

Francke, Helena; Gamalielsson, Jonas; Lundell, Björn

2017-01-01

Introduction: The study describes the conditions for long-term preservation of the content of the institutional repositories of Swedish higher education institutions based on an investigation of how deposited files are managed with regards to file format and how representatives of the repositories describe the functions of the repositories.…

An Adaptive SPARQL Engine with Dynamic Partitioning for Distributed RDF Repositories

KAUST Repository

Ibrahim, Yasser E.

2012-07-01

The tremendous increase in the semantic data is driving the demand for efficient query engines. RDF data being generated at an unprecedented rate introduces a storage, indexing, and querying challenge. Due to the size of the data and the federated nature of the semantic web, it is in many cases impractical to assume a central repository, and more attention is being given to distributed RDF stores. This work is motivated by two major drawbacks of current solutions: 1) pre-processing part is very expensive and takes prohibitively long time for large datasets, and 2) current distributed systems assume that a static partitioning of the data should perform well for all kinds of queries, and do not consider fluctuations in the queryload. In this paper we propose PHD-Store, an in-memory SPARQL engine for distributed RDF repositories. Our system does not assume any particular initial placement of the data and does not require pre-processing before running the first query. It analyzes incoming queries and adjusts data placement dynamically in such a way that communication among repositories is minimized for future queries. To achieve this flexibility, frequent query patterns are detected, and data are redistributed through a Propagating Hash Distribution (PHD) algorithm to ensure optimal placement for frequent query patterns. Our experiments with large RDF graphs verify that PHD-Store scales well and executes complex queries more efficiently than existing systems.

Socioeconomic impacts of repositories

International Nuclear Information System (INIS)

Thomas, J.K.; Hamm, R.R.; Murdock, S.H.

1983-01-01

Federal and state decision makers, community leaders, and residents must know how communities will be changed by the impacts of a high-level nuclear waste repository. This chapter identifies the factors affecting an assessment of socioeconomic impacts and the types of impacts (economic, demographic, fiscal, community service, and social) likely to occur as a result of repository development. Each of these types can be divided into standard (those which typically results from any large-scale development) and special impact categories (those which result from the fact that radioactive materials will be handled). 3 tables

Design and construction issues associated with sealing of a repository in salt

International Nuclear Information System (INIS)

Cook, R.

1991-01-01

The isolation of radioactive wastes in geologic repositories requires that man-made penetrations such as shafts, tunnels and boreholes are adequately sealed. This paper presents the current design and construction issues for sealing a repository in salt and outlines some proposed solutions. The sealing components include shaft seals, tunnel seals, panel seals, and disposal room backfill. The performance requirements and construction constraints determine the types of materials selected and their necessary properties. The current issues of interest include: (1) selection of materials for rigid bulkheads used to promote recovery of the disturbed zone permeability; (2) the selection of bulkhead geometry to cutoff flow through more permeable zones, or zones where recovery of the backfill properties occurs more slowly or not at all; and (3) the interaction of fluids with hazardous wastes with brine and, subsequently, with seal materials that might affect seal material longevity. 19 refs., 5 figs., 1 tab

Structural and Functional Annotation of Hypothetical Proteins of O139

Directory of Open Access Journals (Sweden)

Md. Saiful Islam

2015-06-01

Full Text Available In developing countries threat of cholera is a significant health concern whenever water purification and sewage disposal systems are inadequate. Vibrio cholerae is one of the responsible bacteria involved in cholera disease. The complete genome sequence of V. cholerae deciphers the presence of various genes and hypothetical proteins whose function are not yet understood. Hence analyzing and annotating the structure and function of hypothetical proteins is important for understanding the V. cholerae. V. cholerae O139 is the most common and pathogenic bacterial strain among various V. cholerae strains. In this study sequence of six hypothetical proteins of V. cholerae O139 has been annotated from NCBI. Various computational tools and databases have been used to determine domain family, protein-protein interaction, solubility of protein, ligand binding sites etc. The three dimensional structure of two proteins were modeled and their ligand binding sites were identified. We have found domains and families of only one protein. The analysis revealed that these proteins might have antibiotic resistance activity, DNA breaking-rejoining activity, integrase enzyme activity, restriction endonuclease, etc. Structural prediction of these proteins and detection of binding sites from this study would indicate a potential target aiding docking studies for therapeutic designing against cholera.

Electronic Repository of Russian Historical Statistics

NARCIS (Netherlands)

Tykhonov, Vyacheslav; Kessler, Gijs; Markevich, Andrei; de Vries, Jerry

2014-01-01

The Electronic Repository for Russian Historical Statistics brings together data extracted from various published and unpublished sources in one place. Its principal focus is Russian economic and social history of the last three centuries (18th-21st). The repository caters to the needs of the

Reconstruction and modernization of Novi Han radioactive waste repository

International Nuclear Information System (INIS)

Kolev, I.

2001-01-01

The paper is an overview of the Feasibility Study for Reconstruction and Modernisation of Novi Han Radioactive Waste Repository (NHRWR), performed by EQE Bulgaria AD in 2000 for the Institute for Nuclear Research and Nuclear Energy of the Bulgarian Academy of Sciences. The Study develops a concept for overall reconstruction and modernisation of NHRWR, including rehabilitation and partial reconstruction of existing facilities and planning of new facilities for conditioning and storage of various radioactive wastes and spent sealed sources. The paper presents the general modernisation concept and outlines the proposed principle technical solutions for the existing and new facilities. (author)

Further evidence of close correspondence for alcohol demand decision making for hypothetical and incentivized rewards.

Science.gov (United States)

Amlung, Michael; MacKillop, James

2015-04-01

Alcohol purchase tasks (APTs) are increasingly being used to assess behavioral economic demand for alcohol. Prior studies utilizing APTs have typically assessed demand for hypothetical outcomes, making the extent to which these hypothetical measures reflect preferences when actual rewards are at stake an important empirical question. This study examined alcohol demand across hypothetical and incentivized APTs. Nineteen male heavy drinkers completed two APTs - one for hypothetical alcohol and another in which one randomly-selected outcome was provided. Participants were given an opportunity to consume the alcohol associated with their choice on the incentivized APT during a self-administration period in a simulated bar environment. Results indicated generally close correspondence between APT versions, though participants were more sensitive to increases in price and tended to consume more at low prices on the incentivized version. Estimated consumption on the incentivized APT was highly correlated with the amount of alcohol consumed in the laboratory (r=.87, pdecision-making when rewards are hypothetical vs. actually available. Implications for behavioral economic approaches to addictive behavior and directions for future research are discussed. Copyright © 2015 Elsevier B.V. All rights reserved.

Fons antic i repositoris universitaris a Espanya

Directory of Open Access Journals (Sweden)

Herrera Morillas, José Luis

2015-12-01

Full Text Available Es mostra la presència de col·leccions de fons antic en els repositoris de les biblioteques universitàries espanyoles després d'analitzar tots els repositoris. Per a aquesta anàlisi, com a part de la metodologia emprada, s'ha elaborat un model o llista que consta d'onze elements. Del conjunt de les universitats espanyoles, seixanta tenen repositoris, vint-i-vuit dels quals (16,8 % disposen de col·leccions de fons antic. Com que del concepte de repositori institucional no sembla desprendre's que tingui com a finalitat incloure aquest tipus de col·leccions, es reflexiona sobre la peculiaritat que una part dels repositoris universitaris espanyols inclogui col·leccions d'aquestes característiques.Se muestra la presencia de colecciones de fondo antiguo en los repositorios de las bibliotecas universitarias españolas después de analizar todos los repositorios. Para este análisis, como parte de la metodología empleada, se ha elaborado un modelo o lista que consta de once elementos. Del conjunto de las universidades españolas, sesenta cuentan con repositorios y, de estos, veintiocho (16,8 % disponen de colecciones de fondo antiguo. Debido a que del concepto de repositorio institucional no parece desprenderse que tenga como finalidad albergar este tipo de colecciones, se hace una reflexión sobre la peculiaridad de que parte de los repositorios universitarios españoles incluya colecciones de estas características.This paper uses an analysis of the repositories of Spanish universities to identify which institutions contain rare book and manuscript collections. The method used in this analysis involved examining each university on the basis of a list comprising eleven elements. A total of 60 universities were found to have repositories but only 28 (16.8 % of these contained rare book and manuscript collections. In the light of these figures, which suggest that Spanish university repositories do not generally consider the preservation of rare

Coupling between water chemistry and thermal output at unsaturated repositories

International Nuclear Information System (INIS)

Walton, J.; LeMone, D.; Casey, D.

1995-01-01

This paper summarizes issues in predicting thermohydrology in the near field of a deep geological repository and the implications for performance assessment. Predicted thermohydrology depends on waste package design, and particularly on backfill materials. The coupling between solute concentrations and thermal gradients leads to a prediction of highly variable water chemistry in the near field which is radically different than the initial, undisturbed water chemistry; however, most analyses to date assume that waste package chemistry is approximately the same as initial pore water chemistry. Several alternative, simplified approaches for performance assessment are discussed

Decompression of magma into repository tunnels

NARCIS (Netherlands)

Bokhove, Onno; Woods, A.W.

2002-01-01

It is nontrivial to find and design safe repository sites for nuclear waste. It appears common sense to drill tunnels as repository sites in a mountain in remote and relatively dry regions. However, erosion of the waste canisters by naturally abundant chemicals in the mountains water cycle remains a

Paper and digital repositories in the United States

Directory of Open Access Journals (Sweden)

David F. Kohl

2003-09-01

Full Text Available What you've asked me to talk about today is basically what can libraries do with all the stuff they have and continue to get. Where do we put it all; what do we do with it? As we know, libraries have three core functions: collecting, organizing and preserving the key documents of the human enterprise. And, with apologies to Saint Paul, the greatest of these is preservation. For without preservation neither of the first two ultimately matter. My assignment this morning is to bring you up to date on one specific aspect of the preservation function, library repositories, and indeed, library repository developments in the US. The plan for this morning's presentation is the following: after a brief background review to give us a context for American developments we will examine first the various kinds of print repositories and then the various initiatives for electronic repositories. Because other presentations at this conference deal with electronic repositories, the main focus today will be on U.S. print repositories.

Institutional Repository Sebagai Sarana Komunikasi Ilmiah Yang Sustainable Dan Reliable

Directory of Open Access Journals (Sweden)

Faizuddin Harliansyah

2016-07-01

Full Text Available Abstract; Institutional repositories development has drawn the attention of many scholars throughout the world. Using the keywords ‘institutional repositories’, there are over 300 peer-reviewed articles related on the topic has been indexed in Library, Information Science, & Technology Abstracts (LISTA and SCOPUS. There are also hundreds of theses, dissertations, and websites dedicated on this blooming trends. These are proofs that the importance of IR in higher education has been acknowledged by many professionals in the field. This paper aims at clarifying the role of repositories in strengthening scholarly communication in higher education and research institution and explaining some basic repositories concepts (types of repositories and their characteristics, as well as exploring its relations with open access movement, the development ideas, and resources that could be kept in repositories and deposit policies. Abstrak; Pengembangan institutional repositories telah banyak menyita perhatian dari kalangan ilmiah di seluruh dunia. Melalui kata kunci ‘institutional repositories’, ada lebih dari 300 artikel terulas mitra bestari yang berhubungan dengan topik ini, yang telah terindeks di Library, Information Science, & Technology Abstracts (LISTA, dan SCOPUS. Terdapat juga ratusan tesis, disertasi, dan website yang mengulas trend ini. Inilah bukti bahwa pentingnya institutional repositories (IR telah dipahami oleh para profesional di bidangnya. Tulisan ini akan menjelaskan aturan-aturan repository dalam memperkuat komunikasi ilmiah di perguruan tinggi dan lembaga riset, menjelaskan konsep-konsep dasar repositories, termasuk tipe-tipe repository dan karakteristiknya. Tulisan ini juga akan memperdalam konsep repositories dalam hubungannya dengan gerakan open access, pengembangan ide-ide, sumber-sumber ilmiah yang dapat disimpan di repositories, serta kebijakan penyimpanan di dalamnya.

Push and pull models to manage patient consent and licensing of multimedia resources in digital repositories for case-based reasoning.

Science.gov (United States)

Kononowicz, Andrzej A; Zary, Nabil; Davies, David; Heid, Jörn; Woodham, Luke; Hege, Inga

2011-01-01

Patient consents for distribution of multimedia constitute a significant element of medical case-based repositories in medicine. A technical challenge is posed by the right of patients to withdraw permission to disseminate their images or videos. A technical mechanism for spreading information about changes in multimedia usage licenses is sought. The authors gained their experience by developing and managing a large (>340 cases) repository of virtual patients within the European project eViP. The solution for dissemination of license status should reuse and extend existing metadata standards in medical education. Two methods: PUSH and PULL are described differing in the moment of update and the division of responsibilities between parties in the learning object exchange process. The authors recommend usage of the PUSH scenario because it is better adapted to legal requirements in many countries. It needs to be stressed that the solution is based on mutual trust of the exchange partners and therefore is most appropriate for use in educational alliances and consortia. It is hoped that the proposed models for exchanging consents and licensing information will become a crucial part of the technical frameworks for building case-based repositories.

Analysis of computational vulnerabilities in digital repositories

Directory of Open Access Journals (Sweden)

Valdete Fernandes Belarmino

2015-04-01

Full Text Available Objective. Demonstrates the results of research that aimed to analyze the computational vulnerabilities of digital directories in public Universities. Argues the relevance of information in contemporary societies like an invaluable resource, emphasizing scientific information as an essential element to constitute scientific progress. Characterizes the emergence of Digital Repositories and highlights its use in academic environment to preserve, promote, disseminate and encourage the scientific production. Describes the main software for the construction of digital repositories. Method. The investigation identified and analyzed the vulnerabilities that are exposed the digital repositories using Penetration Testing running. Discriminating the levels of risk and the types of vulnerabilities. Results. From a sample of 30 repositories, we could examine 20, identified that: 5% of the repositories have critical vulnerabilities, 85% high, 25% medium and 100% lowers. Conclusions. Which demonstrates the necessity to adapt actions for these environments that promote informational security to minimizing the incidence of external and / or internal systems attacks.Abstract Grey Text – use bold for subheadings when needed.

Protocol for characterization of clay as a backfill and coverage layers for surface repository

International Nuclear Information System (INIS)

Santos, Daisy M.M.; Tello, Clédola C.O.

2017-01-01

The Radioactive Waste Management includes the operations since generation of the waste until its storage in repository, ensuring the protection of human beings and the environment from the possible negative impacts. The radioactive waste is segregated, treated, conditioned in suitable packages for posterior storage or disposal in repository. The 'RBMN Project' objective is to implement the repository for the disposal of low and intermediate level radioactive wastes generated by nuclear activities in Brazil, proposing a definitive solution for their storage. Engineered and natural barriers as the backfill and coverage layers will compose the disposal system of a near surface repository, concept proposed by the 'RBMN Project'. The use of these barriers aims to avoid or restrict the release of radionuclides from the waste to the human beings and environment. The waterproofing barriers are composed of clays. Certainly, for the national repository, will be used those clays existing in the place where it will be constructed. Them some basic tests will have to be carried out to verify the suitability of these clays as barriers. These tests were determined and performed with reference clay, a Brazilian bentonite constituted of 67.2% montmorillonite. The results were compared with national and international literature of materials with similar mineralogical features. The values found with 95% of confidence interval were 9.73±0,35 μm for granulometric size; 13,3±0,6% for the moisture content and 816±9 mmol.kg -1 for the capacity of cationic exchange. A protocol for characterization of clay was elaborated presenting these tests for it future use. (author)

Protocol for characterization of clay as a backfill and coverage layers for surface repository

Energy Technology Data Exchange (ETDEWEB)

Santos, Daisy M.M.; Tello, Clédola C.O., E-mail: marymarchezini@gmail.com, E-mail: tellocc@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2017-07-01

The Radioactive Waste Management includes the operations since generation of the waste until its storage in repository, ensuring the protection of human beings and the environment from the possible negative impacts. The radioactive waste is segregated, treated, conditioned in suitable packages for posterior storage or disposal in repository. The 'RBMN Project' objective is to implement the repository for the disposal of low and intermediate level radioactive wastes generated by nuclear activities in Brazil, proposing a definitive solution for their storage. Engineered and natural barriers as the backfill and coverage layers will compose the disposal system of a near surface repository, concept proposed by the 'RBMN Project'. The use of these barriers aims to avoid or restrict the release of radionuclides from the waste to the human beings and environment. The waterproofing barriers are composed of clays. Certainly, for the national repository, will be used those clays existing in the place where it will be constructed. Them some basic tests will have to be carried out to verify the suitability of these clays as barriers. These tests were determined and performed with reference clay, a Brazilian bentonite constituted of 67.2% montmorillonite. The results were compared with national and international literature of materials with similar mineralogical features. The values found with 95% of confidence interval were 9.73±0,35 μm for granulometric size; 13,3±0,6% for the moisture content and 816±9 mmol.kg{sup -1} for the capacity of cationic exchange. A protocol for characterization of clay was elaborated presenting these tests for it future use. (author)

Role of groundwater oxidation potential and radiolysis on waste glass performance in crystalline repository environments

International Nuclear Information System (INIS)

Jantzen, C.M.; Bibler, N.E.

1986-01-01

Laboratory experiments have shown that groundwater conditions in a granite repository will be as reducing as those in a basalt repository. Chemical analysis of the reduced groundwaters confirmed that the Fe 2+ /Fe 3+ couple controls the oxidation potential (Eh). The reducing groundwater conditions were found to decrease the time-dependent release of soluble elements (Li and B) from the waste glass. However, due to the lower solubility of multivalent elements released from the glass when the groundwaters are reducing, these elements have significantly lower concentrations in the leachates. Gamma radiolysis reduced the oxidation potential of both granitic and basaltic groundwater in the absence of both waste glass and oxygen. This occurred in tests at atmospheric pressure where H 2 could have escaped from the solution. The mechanism for this decrease in Eh is under investigation but appears related to the reactive amorphous precipitate in both groundwaters. The results of these tests suggest that radiolysis may not cause the groundwaters to become oxidizing in a crystalline repository when abundant Fe 2+ species are present

To trace the water movements in the sites of nuclear waste repositories by chlorine-36

International Nuclear Information System (INIS)

Sun Zhanxue

1995-01-01

Chlorine-36 tracing of the water movements in the potential high-level radioactive waste disposal repository sites has been briefly reviewed. The application of this method to the tracing of precipitation infiltration into the unsaturated zone and the water movement in the saturated zone, to the dating of groundwater and the study of solute migration rates have been discussed

Model-supported selection of distribution coefficients for performance assessment

International Nuclear Information System (INIS)

Ochs, M.; Lothenbach, B.; Shibata, Hirokazu; Yui, Mikazu

1999-01-01

A thermodynamic speciation/sorption model is used to illustrate typical problems encountered in the extrapolation of batch-type K d values to repository conditions. For different bentonite-groundwater systems, the composition of the corresponding equilibrium solutions and the surface speciation of the bentonite is calculated by treating simultaneously solution equilibria of soluble components of the bentonite as well as ion exchange and acid/base reactions at the bentonite surface. K d values for Cs, Ra, and Ni are calculated by implementing the appropriate ion exchange and surface complexation equilibria in the bentonite model. Based on this approach, hypothetical batch experiments are contrasted with expected conditions in compacted backfill. For each of these scenarios, the variation of K d values as a function of groundwater composition is illustrated for Cs, Ra, and Ni. The applicability of measured, batch-type K d values to repository conditions is discussed. (author)

New Roles, New Responsibilities: Examining Training Needs of Repository Staff

Directory of Open Access Journals (Sweden)

Natasha Simons

2012-05-01

Full Text Available INTRODUCTION Institutional repositories play a critical role in the research lifecycle. Funding agencies are increasingly seeking an improved return on their investment in research. Repositories facilitate this process by providing storage of, and access to, institutional research outputs and, more recently, research data. While repositories are generally managed within the academic library, repository staff require different skills and knowledge compared with traditional library roles. This study reports on a survey of Australasian institutional repository staff to identify skills and knowledge sets. METHODS Institutional repository staff working at universities in Australia and New Zealand were invited to participate in an online survey which incorporated both open and closed-ended question types. RESULTS The survey found significant gaps in the current provision of formal training and coursework related to institutional repositories, which echoed findings in the United Kingdom, Italy, and the United States. DISCUSSION There is clearly a need for more and varied training opportunities for repository professionals. Repository work requires a specific set of skills that can be difficult to find and institutions will benefit from investing in training and ongoing development opportunities for repository staff. CONCLUSION The data from this study could be used to facilitate staff recruitment, development, training, and retention strategies.

Evaluation of repository safety

Energy Technology Data Exchange (ETDEWEB)

Sagar, B.; Patrick, W.; Dasgupta, B.; Mohanty, S. [Center for Nuclear Waste Regulatory Analyses, San Antonio (United States)

2002-07-01

The United States high-level waste program requires evaluation of radiological safety during two distinct time intervals. The first interval, commonly referred to as the preclosure period, deals with receipt of waste at the site, transfer into disposal containers, if needed, emplacement in the underground openings, monitoring and maintenance activities, backfill and closure of the underground openings, and decontamination and decommissioning of the surface facilities of the geologic repository. The preclosure period may extend from a few tens of years to as long as a few hundred of years, depending on repository design and societal norms regarding a final decision to permanently seal the repository. During the preclosure or operational period, performance confirmation studies are conducted to provide a basis for updating and reevaluating estimates of postclosure performance and, finally, to provide a basis for a closure decision. The postclosure period during which expected repository performance must meet certain standards may range from ten thousands years, as it does in the United States, to millions of years, as it does in some European nations. Waste handling operations in the preclosure period are to be evaluated in relation to their potential effect on workers, members of general public, and the general environment. During this period, releases of radioactivity are to be monitored and appropriate actions taken whenever established limits are approached or exceeded. Preclosure safety is highly dependent on facility design, operational hardware and automated systems, operational sequences, and reliability of humans involved in operations. Preclosure safety analyses conducted before operations begin play a major role in the design process, selection of equipment, and development of operational procedures. Because of the complexity, duration, and spatial scales of the operations, analyses are conducted using mathematical models implemented in computer codes

Evaluation of repository safety

International Nuclear Information System (INIS)

Sagar, B.; Patrick, W.; Dasgupta, B.; Mohanty, S.

2002-01-01

The United States high-level waste program requires evaluation of radiological safety during two distinct time intervals. The first interval, commonly referred to as the preclosure period, deals with receipt of waste at the site, transfer into disposal containers, if needed, emplacement in the underground openings, monitoring and maintenance activities, backfill and closure of the underground openings, and decontamination and decommissioning of the surface facilities of the geologic repository. The preclosure period may extend from a few tens of years to as long as a few hundred of years, depending on repository design and societal norms regarding a final decision to permanently seal the repository. During the preclosure or operational period, performance confirmation studies are conducted to provide a basis for updating and reevaluating estimates of postclosure performance and, finally, to provide a basis for a closure decision. The postclosure period during which expected repository performance must meet certain standards may range from ten thousands years, as it does in the United States, to millions of years, as it does in some European nations. Waste handling operations in the preclosure period are to be evaluated in relation to their potential effect on workers, members of general public, and the general environment. During this period, releases of radioactivity are to be monitored and appropriate actions taken whenever established limits are approached or exceeded. Preclosure safety is highly dependent on facility design, operational hardware and automated systems, operational sequences, and reliability of humans involved in operations. Preclosure safety analyses conducted before operations begin play a major role in the design process, selection of equipment, and development of operational procedures. Because of the complexity, duration, and spatial scales of the operations, analyses are conducted using mathematical models implemented in computer codes

Sorption of Np by UO2 under repository conditions

Science.gov (United States)

Kazakovskaya, T. V.; Zakharova, E. V.; Haire, M. J.

2010-03-01

This work is a part of the joint Russian - American Program on Beneficial Use of Depleted Uranium. The production of nuclear fuels results in the accumulation of large quantities of depleted uranium (DU) in the form of uranium hexafluoride (UF6), which is converted to uranium oxides. Depleted uranium dioxide (DUO2) can be used as a component of radiation shielding and as an absorbent for migrating radionuclides that may emerge from casks containing spent nuclear fuel (SNF) that are stored for hundreds of thousands of years in high-level wastes (HLW) and SNF repositories (e.g. Yucca Mountain Project). In this case DU oxides serve as an additional engineered chemical barrier. It is known that the primary radioisotope contributor to the calculated long-term radiation dose to the public at the Yucca Mountain SNF repository site boundary is neptunium-237 (237Np). This paper describes the sorption of 237Np in various media (deionized water and J-13 solution) by DUO2. Samples of DUO2 used in this work originated from the treatment of UF6 in a reducing media to form UO2(DUO2-1 at 600°C, DUO2-2 at 700°C, and DUO2-3 at 800°C). All species of DUO2 sorb Np(V) and Np(IV) from aqueous media. Equilibrium was achieved in 24 hours for Np(V) and in 2 hours for Np(IV). Np(V) sorption is accompanied with partial reduction of Np(V) to Np(IV) and vice versa. The sorption of Np(V) onto DUO2 surfaces is irreversible. The investigations on DUO2 transformations were performed under dynamic and static conditions. Under static conditions the solubility of the DUO2 samples in J-13 solution is considerably higher than in DW. When the pre-treatment temperature is decreased, the solubility of DUO2 samples raises regardless of the media. The experiments on interaction between DUO2 and aqueous media (DW and J-13 solution) under dynamic conditions demonstrated that during 30-40 days the penetration/filtration rate of DW and J-13 solution through a thin DUO2 layer decreased dramatically, and then

NIDDK Central Repository

Data.gov (United States)

U.S. Department of Health & Human Services — The NIDDK Central Repository stores biosamples, genetic and other data collected in designated NIDDK-funded clinical studies. The purpose of the NIDDK Central...

New numerical method for solving the solute transport equation

International Nuclear Information System (INIS)

Ross, B.; Koplik, C.M.

1978-01-01

The solute transport equation can be solved numerically by approximating the water flow field by a network of stream tubes and using a Green's function solution within each stream tube. Compared to previous methods, this approach permits greater computational efficiency and easier representation of small discontinuities, and the results are easier to interpret physically. The method has been used to study hypothetical sites for disposal of high-level radioactive waste

Evaluation of the heat transfer in a geological repository concept containing PWR, VHTR and hybrid ads-fission spent fuels

Energy Technology Data Exchange (ETDEWEB)

Jonusan, Raoni A.S.; Pereira, Fernando; Velasquez, Carlos E.; Salome, Jean A.D.; Cardoso, Fabiano; Pereira, Claubia; Fortini, Angela, E-mail: claubia@nuclear.ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear

2017-11-01

The investigation of the thermal behavior of spent fuel (SF) materials is essential to determining appropriate potential sites to accommodate geological repositories as well as the design of canisters, considering their potential risk to people health and of environmental contamination. This work presents studies of the temperature in a canister containing spent fuels discharged from Pressurized Water Reactor (PWR), Very High-Temperature Reactor (VHTR) and Accelerator-Driven Subcritical Reactor System (ADS) reactor systems in a geological repository concept. The thermal analyses were performed with the software ANSYS, which is widely used to solve engineering problems through the Finite Element Method. The ANSYS Transient Thermal module was used. The spent nuclear fuels were set as heat sources using data of previous studies derived from decay heat curves. The studies were based on comparison of the mean temperature on a canister surface along the time under geological disposal conditions, for a same amount of each type of spent nuclear fuel evaluated. The results conclude that fuels from VHTR and ADS systems are inappropriate to be disposed in a standardized PWR canister, demanding new studies to determine the optimal amount of spent fuel and new internal canister geometries. It is also possible to conclude that the hypothetical situation of a single type of canister being used to accommodate different types of spent nuclear fuels is not technically feasible. (author)

Researching radioactive waste disposal. [Underground repository

Energy Technology Data Exchange (ETDEWEB)

Feates, F; Keen, N [UKAEA Research Group, Harwell. Atomic Energy Research Establishment

1976-02-16

At present it is planned to use the vitrification process to convert highly radioactive liquid wastes, arising from nuclear power programme, into glass which will be contained in steel cylinders for storage. The UKAEA in collaboration with other European countries is currently assessing the relative suitability of various natural geological structures as final repositories for the vitrified material. The Institute of Geological Sciences has been commissioned to specify the geological criteria that should be met by a rock structure if it is to be used for the construction of a repository though at this stage disposal sites are not being sought. The current research programme aims to obtain basic geological data about the structure of the rocks well below the surface and is expected to continue for at least three years. The results in all the European countries will then be considered so that the United Kingdom can choose a preferred method for isolating their wastes. It is only at that stage that a firm commitment may be made to select a site for a potential repository, when a far more detailed scientific research study will be instituted. Heat transfer problems and chemical effects which may occur within and around repositories are being investigated and a conceptual design study for an underground repository is being prepared.

Cross Institutional Cooperation on a Shared Bit Repository

DEFF Research Database (Denmark)

Zierau, Eld; Kejser, Ulla Bøgvad

2013-01-01

This paper explores how independent institutions, such as archives and libraries, can cooperate on managing a shared bit repository with bit preservation, in order to use their resources for preservation in a more cost-effective way. It uses the OAIS Reference Model to provide a framework...... for systematically analysing institutions technical and organisational requirements for a remote bit repository. Instead of viewing a bit repository simply as Archival Storage for the institutions repositories, we argue for viewing it as consisting of a subset of functions from all entities defined by the OAIS...... Reference Model. The work is motivated by and used in a current Danish feasibility study for establishing a national bit repository. The study revealed that depending on their missions and the collections they hold, the institutions have varying requirements e.g. for bit safety, accessibility...

Cross Institutional Cooperation on a Shared Bit Repository

DEFF Research Database (Denmark)

Zierau, Eld; Kejser, Ulla Bøgvad

2010-01-01

This paper explores how independent institutions, such as archives and libraries, can cooperate on managing a shared bit repository with bit preservation in order to use their resources for preservation n in a more cost-effective way. It uses the OAIS Reference Model to provide a framework...... for systematically analysing the technical and organizational requirements of institutions for a remote bit repository. Instead of viewing a bit repository simply as Archival Storage for the institutions’ repositories, we argue for viewing it as consisting of a subset of functions from all entities defined...... by the OAIS Reference Model. The work is motivated by and used in a current Danish feasibility study for establishing a national bit repository. The study revealed that depending on their missions and the collections they hold, the institutions have varying requirements, such as for bit safety, accessibility...

Safety assessment for a KBS-3H spent nuclear fuel repository at Olkiluoto. Complementary evaluations of safety

Energy Technology Data Exchange (ETDEWEB)

Neall, Fiona; Pastina, Barbara; Snellman, Margit; Smith, Paul; Gribi, P.; Johnson, Lawrence

2008-12-15

The KBS-3H design is a variant of the more general KBS-3 method for the geological disposal of spent nuclear fuel in Finland and Sweden. In the KBS-3H design, multiple assemblies containing spent fuel are emplaced horizontally in parallel, approximately 300 m long, slightly inclined deposition drifts. The copper canisters, each with a surrounding layer of bentonite clay, are placed in perforated steel shells prior to deposition in the drifts; the assembly is called the 'supercontainer'. The other KBS-3 variant is the KBS-3V design, in which the copper canisters are emplaced vertically in individual deposition holes surrounded by bentonite clay but without steel supercontainer shells. SKB and Posiva have conducted a Research, Development and Demonstration programme over the period 2002-2007 with the overall aim of establishing whether KBS-3H represents a feasible alternative to KBS-3V. As part of this programme, the long-term safety of a KBS-3H repository has been assessed in the KBS-3H safety studies. In order to focus the safety studies, the Olkiluoto site in the municipality of Eurajoki, which is the proposed site for a spent fuel repository in Finland, was used as a hypothetical site for a KBS-3H repository. The present report is part of a portfolio of reports discussing the long-term safety of the KBS-3H repository. The overall outcome of the KBS-3H safety studies is documented in the summary report, 'Safety assessment for a KBS-3H repository for spent nuclear fuel at Olkiluoto'. The purpose and scope of the KBS-3H complementary evaluations of safety report is provided in Posiva's Safety Case Plan, which is based on Regulatory Guide YVL 8.4 and on international guidelines on complementary lines of argument to long-term safety that are considered an important element of a post-closure safety case for geological repositories. Complementary evaluations of safety require the use of evaluations, evidence and qualitative supporting arguments

Treatment of uncertainty in the US department of energy's yucca mountain repository total system performance assessment (TSPA)

International Nuclear Information System (INIS)

Van Luik, A.; Zwahlen, E.

2004-01-01

The regulatory requirements being addressed in the US geological repository programme for spent nuclear fuel and high-level waste specify that performance assessment is to be used to address probabilistically defined mean-value dose constraints. Dose was chosen as the preferred performance measure because an acceptable dose limit could be selected through the regulation-setting process, based on a defined acceptable risk. By setting a dose limit, arguments about the conversion of a potential dose to a potential risk was taken off the table as a potential licensing issue. However, the probabilistic approach called for actually delivers a 'risk of a dose', a risk of a potential given dose value to a hypothetical person living at a set distance from the repository, with a set lifestyle, between the time of permanent closure and 10 000 years. Analyses must also be shown for the peak dose if it occurs after 10 000 years, essentially to a million years. For uncertain parameters that are important to system performance, the goal is to present an analysis that, in accord with applicable regulation, focuses on the mean value of the performance measure but also explores the 'full range of defensible and reasonable parameter distributions'.... System performance evaluations should not be unduly influenced by... 'extreme physical situations and parameter values'. These disclosure requirements are to be met by showing a range of potential outcomes and designating the mean value within that range. (author)

Tools for Managing Repository Objects

OpenAIRE

Banker, Rajiv D.; Isakowitz, Tomas; Kauffman, Robert J.; Kumar, Rachna; Zweig, Dani

1993-01-01

working Paper Series: STERN IS-93-46 The past few years have seen the introduction of repository-based computer aided software engineering (CASE) tools which may finally enable us to develop software which is reliable and affordable. With the new tools come new challenges for management: Repository-based CASE changes software development to such an extent that traditional approaches to estimation, performance, and productivity assessment may no longer suffice - if they ever...

Combining aptamers and in silico interaction studies to decipher the function of hypothetical proteins

DEFF Research Database (Denmark)

Suravajhala, Prashanth; Burri, Harsha Vardhan Reddy; Heiskanen, Arto

2014-01-01

We present the potential role of aptamers in elucidating the function of hypothetical proteins, as well as the possibilities provided by bioinformatics for establishing a benchmark for aptamer-protein prediction methods. With these future perspectives, the role of hypothetical proteins as target ...... molecules for diagnostics and therapies could prove to be very useful in development of medical technology....

Repository seal materials performance for a SALT Repository Project 5-year code/model development plan: Draft

International Nuclear Information System (INIS)

1987-06-01

This document describes an integrated laboratory testing and model development effort for the seal system for a high-level nuclear waste repository in salt. The testing and modeling efforts are designed to determine seal material response in the repository environment, to provide models of seal system components for performance assessment, and to assist in the development of seal system designs. A code/model development and performance analysis program will be performed to predict the short- and long-term response of seal materials and seal components. The results from these analyses will be used to support the material testing activities on this contract and to support performance assessment activities that are conducted in other parts of the Salt Repository Project (SRP). 48 refs., 15 figs., 4 tabs

Demand curves for hypothetical cocaine in cocaine-dependent individuals.

Science.gov (United States)

Bruner, Natalie R; Johnson, Matthew W

2014-03-01

Drug purchasing tasks have been successfully used to examine demand for hypothetical consumption of abused drugs including heroin, nicotine, and alcohol. In these tasks, drug users make hypothetical choices whether to buy drugs, and if so, at what quantity, at various potential prices. These tasks allow for behavioral economic assessment of that drug's intensity of demand (preferred level of consumption at extremely low prices) and demand elasticity (sensitivity of consumption to price), among other metrics. However, a purchasing task for cocaine in cocaine-dependent individuals has not been investigated. This study examined a novel Cocaine Purchasing Task and the relation between resulting demand metrics and self-reported cocaine use data. Participants completed a questionnaire assessing hypothetical purchases of cocaine units at prices ranging from $0.01 to $1,000. Demand curves were generated from responses on the Cocaine Purchasing Task. Correlations compared metrics from the demand curve to measures of real-world cocaine use. Group and individual data were well modeled by a demand curve function. The validity of the Cocaine Purchasing Task was supported by a significant correlation between the demand curve metrics of demand intensity and O max (determined from Cocaine Purchasing Task data) and self-reported measures of cocaine use. Partial correlations revealed that after controlling for demand intensity, demand elasticity and the related measure, P max, were significantly correlated with real-world cocaine use. Results indicate that the Cocaine Purchasing Task produces orderly demand curve data, and that these data relate to real-world measures of cocaine use.

Environmental impact of Yucca Mountain Repository

International Nuclear Information System (INIS)

Ahn, Joonhong

2005-01-01

Environmental impact of the Yucca Mountain Repository (YMR) has been quantitatively evaluated in terms of the radiotoxicity of transuranic (TRU) and fission-product radionuclides existing in the environment after released from failed packages. Inventory abstraction has been made based on the data published in Final Environmental Impact Statement published by US DOE. Mathematical model and computation code have been developed based on analytical solutions. Environmental impact from the commercial spent nuclear fuel (CSNF) packages is about 90% of the total impact including the contribution from defense waste (DW) packages. Impacts due to isotopes of Cm, Am, Pu and Np, and their decay daughters are dominant, compared with those from fission-product nuclides. Numerical results show that reduction of the TRU nuclides by a factor of 100 makes the impact from CSNF smaller than that from DW. (author)

Gas generation and release from the VLJ repository

International Nuclear Information System (INIS)

Vieno, T.; Valkiainen, M.

1992-01-01

The VLJ repository is an underground disposal facility located at the Olkiluoto nuclear power plant site on the west coast of Finland. The repository will house low (LLW) and intermediate level radioactive wastes (MLW) from the TVO I and TVO II BWR's and the spent fuel interim store at Olkiluoto. The disposal rooms have been excavated at a depth of 60... 100 meters in the crystalline bedrock. They consist of two rock silos - one for the LLW and the other for MLW. Low level waste is usually packed in steel drums and steel boxes. Medium level wastes consists of bituminized resins in steel drums. Wastes packages are emplaced in concrete boxes before transportation into the repository. Low level wastes are emplaced in the shotcreted rock silo where no backfilling will used. For medium level wastes, a separate silo of reinforced concrete has been constructed inside the rock silo. No backfilling will be used inside the concrete silo and an opening will be made in the lid of the concrete silo for gas release. The microbial degradation of low level wastes is the principle gas generation process in the repository. The gas transport though the bedrock covering the repository is evaluated with the help of ground water flow study. It is recommended that the shotcrete lining on the ceiling of the repository cavern is partly removed before the final sealing of the repository. Provided that dissipation of gases from the disposal cavern into the rock can been assured, the overall effects of gas generation on the long-term safety of the repository are insignificant. 10 refs., 6 figs

Post-closure radiation dose assessment for Yucca Mountain repository

International Nuclear Information System (INIS)

Jia Mingyan; Zhang Xiabin; Yang Chuncai

2006-01-01

A brief introduction of post-closure long-term radiation safety assessment results was represented for the yucca mountain high-level waste geographic disposal repository. In 1 million years after repository closure, for the higher temperature repository operating mode, the peak annual dose would be 150 millirem (120 millirem under the lower-temperature operating mode) to a reasonably maximally exposed individual approximately 18 kilometers (11 miles) from the repository. The analysis of a drilling intrusion event occurring at 30,000 years indicated a peak of the mean annual dose to the reasonably maximally exposed individual approximately 18 kilometers (11 miles) downstream of the repository would be 0.002 millirem. The analysis of an igneous activity scenario, including a volcanic eruption event and igneous intrusion event indicated a peak of the mean annual dose to the reasonably maximally exposed individual approximately 18 kilometers downstream of the repository would be 0.1 millirem. (authors)

Design of repository sealing systems - 1981

International Nuclear Information System (INIS)

Ellison, R.D.; Shukla, D.K.; Kelsall, P.C.; D'Appolonia Consulting Engineers, Albuquerque, NM)

1982-01-01

Isolating nuclear waste in geologic repositories will require the sealing of penetrations such as access shafts and tunnels, disposal rooms, and exploration boreholes. This paper discusses seal designs developed for a repository in bedded salt referenced to the stratigraphy of southeastern New Mexico. Designs are based on a multiple component concept whereby individual components are designed for a specific function and location. For a repository in salt the major function of the seals is to exclude groundwater inflow. Two main types of component are included for this purpose: (1) bulk-heads are dense concrete structures keyed into the walls of the penetration and are intended to reduce flow at the interface between the seal and the salt; (2) backfills are granular materials compacted in place in the penetration. In the repository the major backfill material is crushed salt, which is expected to consolidate and recrystallize as the rooms close in response to salt creep. Densely compacted clays will be used as backfill in the shafts closer to potential sources of water inflow. 22 references, 10 figures, 1 table

Creation of Data Repositories to Advance Nursing Science.

Science.gov (United States)

Perazzo, Joseph; Rodriguez, Margaret; Currie, Jackson; Salata, Robert; Webel, Allison R

2017-12-01

Data repositories are a strategy in line with precision medicine and big data initiatives, and are an efficient way to maximize data utility and form collaborative research relationships. Nurse researchers are uniquely positioned to make a valuable contribution using this strategy. The purpose of this article is to present a review of the benefits and challenges associated with developing data repositories, and to describe the process we used to develop and maintain a data repository in HIV research. Systematic planning, data collection, synthesis, and data sharing have enabled us to conduct robust cross-sectional and longitudinal analyses with more than 200 people living with HIV. Our repository building has also led to collaboration and training, both in and out of our organization. We present a pragmatic and affordable way that nurse scientists can build and maintain a data repository, helping us continue to make to our understanding of health phenomena.

Reducing Psychological Resistance to Digital Repositories

Directory of Open Access Journals (Sweden)

Brian Quinn

2010-06-01

Full Text Available The potential value of digital repositories is dependent on the cooperation of scholars to deposit their work. Although many researchers have been resistant to submitting their work, the literature on digital repositories contains very little research on the psychology of resistance. This article looks at the psychological literature on resistance and explores what its implications might be for reducing the resistance of scholars to submitting their work to digital repositories. Psychologists have devised many potentially useful strategies for reducing resistance that might be used to address the problem; this article examines these strategies and how they might be applied.

Augmenting interoperability across repositories architectural ideas

CERN Multimedia

CERN. Geneva

2005-01-01

The aDORe digital repository architecture designed and implemented by the Los Alamos Research Library is fully standards-based and highly modular, with the various components of the architecture interacting in a protocol-driven manner. Although aDORe was designed for use in the context of the Los Alamos Library, its modular and standards-based design has led to interesting insights regarding possible new levels of interoperability in a federation of heterogeneous repositories. The presentation will discuss these insights, and will illustrate that attractive federations of repositories can be built by introducing rather basic interoperability requirements. The presentation will also show that, once these requirements are met, a powerful service framework that overlays the federation can emerge.

Executive-style briefings on selected repository design issues

International Nuclear Information System (INIS)

1978-01-01

This document is a collection of executive-style briefings on selected repository design issues. Most of the briefings discuss differences between the US repository design bases presented in US Working Draft on Repository Physical Descriptions in a Salt Formation, prepared in support of INFCE discussions of May 1978 and the FRG-Netherlands design bases, presented in Design Study of a Radioactive Waste Repository to be Mined in a Medium-Size Salt Dome by Hamstra and Velzeboer, Netherlands Energy Research Foundation, January 1978. Advantages and disadvantages of the two sets of design bases are discussed, and the impacts of adopting either of these bases on the other's programs and positions are identified

Conference report: 2012 Repository Symposium. Final storage in Germany. New start - ways and consequences of the site selection procedure

International Nuclear Information System (INIS)

Kettler, John

2012-01-01

The Aachen Institute for Nuclear Training invited participants to the 3-day '2012 Repository Symposium - Final Storage in Germany' held in Bonn. The subtitle of the event, 'New Start - Ways and Consequences of the Site Selection Procedure,' expressed the organizers' summary that the Repository Finding Act currently under discussion did not give rise to any expectation of a repository for high-level radioactive waste before 2080. The symposium was attended by more than 120 persons from Germany and abroad. They discussed the basic elements of the site selection procedure and its consequences on the basis of the draft so far known to the public. While extensive public participation is envisaged for the stage of finding a repository, this does not apply to the draft legislation in the same way. The legal determinations are negotiated in a small circle by the political parties and the state governments. Michael Sailer (Oeko-Institut e.V.) holds that agreement on a repository finding act is urgent. Prof. Dr. Bruno Thomauske (RWTH Aachen) arrives at the conclusion mentioned above, that no repository for high-level radioactive waste can start operation before 2080 on the basis of the Repository Finding Act. Dr. Bettina Keienburg, attorney at law, in her paper drew attention to the points of dispute in the draft legislation with regard to changes in competency of public authorities. The draft law indicated a clear shift of competency for finding a repository from the Federal Office for Radiation Protection to a federal agency yet to be set up. Prof. Dr. Christoph Moench outlined the deficiencies of the draft legislation in matters of refinancing and the polluter-pays principle. Among the tentative solutions discussed it was above all the Swedish model which was acclaimed most widely. (orig.)

Repository-analog experiments of nuclear waste leaching and migration

International Nuclear Information System (INIS)

Seitz, M.G.

1982-01-01

The potential for radionuclide migration from a breached nuclear-waste repository depends on the leaching and subsequent interaction of the leached radionuclides with materials in the groundwater flow path. An attempt is made to consider all interactions using experiments that integrate repository materials. Results of a repository-analog experiment using borosilicate glass, fissured granite, and flowing water suggest: (1) plutonium was immobile possibly because of its low solubility; (2) caesium migrated down slowly because of sorption; and (3) neptunium remained oxidized even in water of low oxidation potential. By summing the effects of all interactions, not just sorption, the repository-analog experiment produced radionuclide migration that could be expected from a breached repository. (author)

Publishers and repositories

CERN Multimedia

CERN. Geneva

2007-01-01

The impact of self-archiving on journals and publishers is an important topic for all those involved in scholarly communication. There is some evidence that the physics arXiv has had no impact on physics journals, while 'economic common sense' suggests that some impact is inevitable. I shall review recent studies of librarian attitudes towards repositories and journals, and place this in the context of IOP Publishing's experiences with arXiv. I shall offer some possible reasons for the mis-match between these perspectives and then discuss how IOP has linked with arXiv and experimented with OA publishing. As well as launching OA journals we have co-operated with Cornell and the arXiv on Eprintweb.org, a platform that offers new features to repository users. View Andrew Wray's biography

Business models for digital repositories

CERN Document Server

CERN. Geneva; Bjørnshauge, Lars

2007-01-01

Those setting up, or planning to set up, a digital repository may be interested to know more about what has gone before them. What is involved, what is the cost, how many people are needed, how have others made the case to their institution, and how do you get anything into it once it is built? I have recently undertaken a study of European repository business models for the DRIVER project and will present an overview of the findings.

Waste package/repository impact study: Final report

Energy Technology Data Exchange (ETDEWEB)

1985-09-01

The Waste Package/Repository Impact Study was conducted to evaluate the feasibility of using the current reference salt waste package in the salt repository conceptual design. All elements of the repository that may impact waste package parameters, i.e., (size, weight, heat load) were evaluated. The repository elements considered included waste hoist feasibility, transporter and emplacement machine feasibility, subsurface entry dimensions, feasibility of emplacement configuration, and temperature limits. The evaluations are discussed in detail with supplemental technical data included in Appendices to this report, as appropriate. Results and conclusions of the evaluations are discussed in light of the acceptability of the current reference waste package as the basis for salt conceptual design. Finally, recommendations are made relative to the salt project position on the application of the reference waste package as a basis for future design activities. 31 refs., 11 figs., 11 tabs.

Waste package/repository impact study: Final report

International Nuclear Information System (INIS)

1985-09-01

The Waste Package/Repository Impact Study was conducted to evaluate the feasibility of using the current reference salt waste package in the salt repository conceptual design. All elements of the repository that may impact waste package parameters, i.e., (size, weight, heat load) were evaluated. The repository elements considered included waste hoist feasibility, transporter and emplacement machine feasibility, subsurface entry dimensions, feasibility of emplacement configuration, and temperature limits. The evaluations are discussed in detail with supplemental technical data included in Appendices to this report, as appropriate. Results and conclusions of the evaluations are discussed in light of the acceptability of the current reference waste package as the basis for salt conceptual design. Finally, recommendations are made relative to the salt project position on the application of the reference waste package as a basis for future design activities. 31 refs., 11 figs., 11 tabs

Status and development of deep geological repository in Slovak republic from geological point of view

Directory of Open Access Journals (Sweden)

Jozef Franzen

2007-01-01

Full Text Available During the operation of Slovak NPPs, production of approximately 2,300 metric tons of spent fuel expressed as heavy metal (18,654 spent fuel assemblies is expected. In addition, about 5000 metric tons of radioactive waste unfit for near surface repository at Mochovce and destined for a deep geological disposal. The safe and long-term solution of back-end fuel cycle is so highly required.One of the most favorable solutions is Deep Geological Repository (DGR. The site for a DGR, along with repository design and the engineered barrier system must ensure long-term safety of the disposal system.A preliminary set of site-selection criteria for a DGR was proposed in Slovakia, based on worldwide experience and consistent with IAEA recommendations. Main groups of criteria are: 1 geological and tectonic stability of prospective sites; 2 appropriate characteristics of host rock (lithological homogeneity, suitable hydrogeological and geochemical conditions, favourable geotechnical setting, absence of mineral resources, etc.; 3 conflict of interests (natural resources, natural and cultural heritage, protected resources of thermal waters, etc..Based on the previous geological investigations, three distinct areas (five localities were determined as the most prospective sites for construction of a DGR so far. Three of them are built by granitoids rock (Tribeč Mts., Veporske vrchy Mts. and Stolicke vrchy Mts., other consist of sedimentary rock formations (Cerova vrchovina Upland and Rimavska kotlina Basin. Objective for the next investigation stage is to perform more detailed geological characterization of the prospective sites.

Repository exploration

International Nuclear Information System (INIS)

Pentz, D.L.

1984-01-01

This paper discusses exploration objectives and requirements for a nuclear repository in the U.S.A. The importance of designing the exploration program to meet the system performance objectives is emphasized and some examples of the extent of exploration required before the License Application for Construction Authorization is granted are also discussed

Behavior of stressed and unstressed 304L specimens in tuff repository environmental conditions

International Nuclear Information System (INIS)

Juhas, M.C.; McCright, R.D.; Garrison, R.E.

1984-11-01

This paper presents preliminary results of an investigation of the behavior of candidate barrier material for high-level nuclear waste storage, Type 304L stainless steel, in tuff repository environmental conditions. Tuff is a densely welded, devitrified, igneous rock common to the proposed repository site at Yucca Mountain, Nevada. The results discussed include: irradiation corrosion tests, U-bend irradiation corrosion tests, slow strain rate tests, and bent beam stress corrosion tests. Results indicate that Type 304L stainless steel shows excellent resistance to general, localized, and stress corrosion under the environmental and microstructural conditions tested so far. The environmental test conditions are 50 to 100 0 C J-13 well water (non-saline, near neutral pH, and oxic in nature) and saturated steam at 100 0 C. Microstructural conditions include solution annealed and long furnace heat treatments to provoke a sensitized structure. However, this particular type of stainless steel may be susceptible to long-term, low-temperature sensitization because of the combination of expected time at elevated temperature and residual stress in the container after emplacement in the repository. Other grades of austenitic stainless steels are reported to be more resistant to low-temperature sensitization. Future work will therefore include more extensive testing of these grades. 15 references, 5 figures, 7 tables

Sealing of rock fractures around HLW repositories, 2

International Nuclear Information System (INIS)

Chigira, Masahiro

1993-01-01

During the flow of a silica-saturated hydrothermal solution in rock with negative temperature gradients, the behavior of silica in such solution is controlled by temperature, temperature gradient, pH, flow velocity, and solid surface area/fluid mass ratio (A/M). Such behavior could not be analysed precisely and totally at present state, but 'threshold conditions' have been found experimentally, under which solution keeps in equilibrium with solid silica in a flow field with temperature gradients. Solution keeps in equilibrium with solid silica under the conditions of A/M ratios more than 700 m 2 /kg, temperatures 80 - 120degC, temperature gradients less than 50degC/m, and pH 6 - 9, if mean pore velocities are less than 100 m/y. Under the same A/M ratios, temperature gradients, and pH, mean pore velocities must be less than 5 m/y in order to keep solution in equilibrium with solid silica in a flow field with temperatures 80 - 25degC. These 'threshold conditions' are expected to be satisfied in a near field of a repository of high-level radioactive waste, which suggests that if a groundwater is once saturated with silica under a higher temperature in a near field it would flow with decreasing temperatures in equilibrium with solid silica. In this case, the precipitation rate of amorphous silica along the flow path can be estimated without kinetic consideration. (author) 54 refs

Learning frameworks as an alternative to repositories

DEFF Research Database (Denmark)

Dalsgaard, Christian

2005-01-01

This paper presents the concept of ‘learning frameworks’. The purpose of the paper is to discuss and question collections of digital learning objects in large repositories and to argue for large learning frameworks which organise a number of thematically related digital learning materials. Whereas...... a learning object repository contains all kinds of materials, a learning framework consists of an organisation of materials related to a common theme. Further, a repository consists of single, self-contained objects, whereas a learning framework is an open-ended environment which presents a number...

Status of Proposed Repository for Latin-American Spent Fuel

Energy Technology Data Exchange (ETDEWEB)

Ferrada, J.J.

2004-10-04

This report compiles preliminary information that supports the premise that a repository is needed in Latin America and analyzes the nuclear situation (mainly in Argentina and Brazil) in terms of nuclear capabilities, inventories, and regional spent-fuel repositories. The report is based on several sources and summarizes (1) the nuclear capabilities in Latin America and establishes the framework for the need of a permanent repository, (2) the International Atomic Energy Agency (IAEA) approach for a regional spent-fuel repository and describes the support that international institutions are lending to this issue, (3) the current situation in Argentina in order to analyze the Argentinean willingness to find a location for a deep geological repository, and (4) the issues involved in selecting a location for the repository and identifies a potential location. This report then draws conclusions based on an analysis of this information. The focus of this report is mainly on spent fuel and does not elaborate on other radiological waste sources.

Gabbro as a host rock for a nuclear waste repository

International Nuclear Information System (INIS)

Ahlbom, K.; Leijon, B.; Smellie, J.; Liedholm, M.

1992-09-01

As an alternative to granitic rocks, gabbro and other basic rock types have been investigated with respect to their suitability to host a nuclear waste repository. The present report summarizes and examines existing geoscientific knowledge of relevance in assessing the potential merits of gabbro as a repository host rock. Implications in terms of site selection, repository construction and post-closure repository performance are also discussed. The objective of the study is to provide a basis for decisions as regards future consideration of the gabbro alternative. It is found that there are rather few gabbro bodies in Sweden, that are potentially of sufficient size to host a repository. Thus, gabbro offers little latitude as regards site selection. In comparison to siting a repository in granitic rocks, this is a major disadvantage, and it may in fact remove gabbro from further consideration. The potential advantages of gabbro refer to repository performance, and include low hydraulic conductivity and a chemical environment promoting efficient radionuclide retardation. However, results from field investigations show that groundwater flow in gabbro bodies is largely controlled by intersecting heterogeneities, in particular granitic dykes, that are significantly more conductive to water than the gabbro. In the far-field scale significant to repository performance, this may reduce or eliminate the potential effects of favourable hydraulic and chemical characteristics of the gabbro itself. In conclusion, there are apparent difficulties associated with siting a repository in gabbro, due to lack of sufficiently large gabbro bodies. On the basis of the present state of knowledge, no decisive differences can be demonstrated when comparing gabbro with granitic rocks, neither with respects to repository construction, nor as regards repository performance. (au)

Design and production of the KBS-3 repository

International Nuclear Information System (INIS)

Moren, Lena

2010-12-01

The report contains the common basis for a set of Production reports, presenting how the KBS-3 repository is designed, produced and inspected. The set of reports is included in the safety report for the KBS-3 repository and repository facility. The report presents the role of the Production reports within the safety report and their common purposes and objectives. An important part of the report is to present the background and sources to the principles to be applied in the design, the functions of the KBS-3 repository and the barrier functions the engineered barriers and rock. Further, the methodology to substantiate detailed design premises for the engineered barriers, underground openings and other parts of the KBS-3 repository is presented. The report also gives an overview of the KBS-3 system and its facilities and the production lines for the spent fuel, the engineered barriers and underground openings. Finally, an introduction to quality management, safety classification and their application is given

Design and production of the KBS-3 repository

Energy Technology Data Exchange (ETDEWEB)

Moren, Lena

2010-12-15

The report contains the common basis for a set of Production reports, presenting how the KBS-3 repository is designed, produced and inspected. The set of reports is included in the safety report for the KBS-3 repository and repository facility. The report presents the role of the Production reports within the safety report and their common purposes and objectives. An important part of the report is to present the background and sources to the principles to be applied in the design, the functions of the KBS-3 repository and the barrier functions the engineered barriers and rock. Further, the methodology to substantiate detailed design premises for the engineered barriers, underground openings and other parts of the KBS-3 repository is presented. The report also gives an overview of the KBS-3 system and its facilities and the production lines for the spent fuel, the engineered barriers and underground openings. Finally, an introduction to quality management, safety classification and their application is given

Can the repository problem in Germany be solved by societal consensus?

International Nuclear Information System (INIS)

Renn, Ortwin

2009-01-01

The final storage of radioactive waste is an issue mobilizing people. It is intimately connected with the whole debate about the future of nuclear power. Another concept associated with this topic is risk, which also incorporates the three basic elements of complexity, uncertainty, and ambiguity. If the repository problem in Germany is to be advanced, questions must be answered about the complexity, uncertainty, and ambiguity of the risk involved, and the answers must be taken into account in the process of implementation. - Complexity: Experts must seek to achieve consensus in knowledge of the criteria describing the suitability of a repository. - Uncertainty: Discourses must be led to weigh the pros and cons in finding a stable solution for a 'sufficiently good' site under the prevailing conditions. - Ambiguity: An overarching, fundamental discourse must be led about the way people in Germany design their future, i.e. above and beyond the mere question of power supply. The siting decision requires agreement, on scientific and technical grounds, about the suitability of site concepts and the criteria applying to a suitable site. In addition, there must be an equitable compensation for the acceptance of uncertainties. The objective is finding a just and stable solution so as to be able to manage uncertainties in a prospective way. This also involves site development as a respected and honored acceptance by society of uncertain consequences and possible future burdens. (orig.)

10 CFR 51.67 - Environmental information concerning geologic repositories.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Environmental information concerning geologic repositories... information concerning geologic repositories. (a) In lieu of an environmental report, the Department of Energy... connection with any geologic repository developed under Subtitle A of Title I, or under Title IV, of the...

Repository for high level radioactive wastes in Brazil: the importance of geochemical (Micro thermometric) studies and fluid migration in potential host rocks

International Nuclear Information System (INIS)

Rios, Francisco Javier; Fuzikawa, Kazuo; Alves, James Vieira; Neves, Jose Marques Correia

2003-01-01

A detailed fluid inclusion study of host rocks, is of fundamental importance in the selection of geologically suitable areas for high level nuclear waste repository constructions (HLRW). The LIFM-CDTN is enabled to develop studies that confirm: the presence or not, of corrosive fluid in minerals from host rocks of the repository and the possible presence of micro fractures (and fluid leakage) when these rocks are submitted to high temperatures. These fluid geochemistry studies, with permeability determinations by means of pressurized air injection must be carried out in rocks hosting nuclear waste. Micro fracture determination is of vital importance since many naturally corrosive solutions, present in the mineral rocks, could flow out through these plans affecting the walls of the repository. (author)

Building a semantic web-based metadata repository for facilitating detailed clinical modeling in cancer genome studies.

Science.gov (United States)

Sharma, Deepak K; Solbrig, Harold R; Tao, Cui; Weng, Chunhua; Chute, Christopher G; Jiang, Guoqian

2017-06-05

Detailed Clinical Models (DCMs) have been regarded as the basis for retaining computable meaning when data are exchanged between heterogeneous computer systems. To better support clinical cancer data capturing and reporting, there is an emerging need to develop informatics solutions for standards-based clinical models in cancer study domains. The objective of the study is to develop and evaluate a cancer genome study metadata management system that serves as a key infrastructure in supporting clinical information modeling in cancer genome study domains. We leveraged a Semantic Web-based metadata repository enhanced with both ISO11179 metadata standard and Clinical Information Modeling Initiative (CIMI) Reference Model. We used the common data elements (CDEs) defined in The Cancer Genome Atlas (TCGA) data dictionary, and extracted the metadata of the CDEs using the NCI Cancer Data Standards Repository (caDSR) CDE dataset rendered in the Resource Description Framework (RDF). The ITEM/ITEM_GROUP pattern defined in the latest CIMI Reference Model is used to represent reusable model elements (mini-Archetypes). We produced a metadata repository with 38 clinical cancer genome study domains, comprising a rich collection of mini-Archetype pattern instances. We performed a case study of the domain "clinical pharmaceutical" in the TCGA data dictionary and demonstrated enriched data elements in the metadata repository are very useful in support of building detailed clinical models. Our informatics approach leveraging Semantic Web technologies provides an effective way to build a CIMI-compliant metadata repository that would facilitate the detailed clinical modeling to support use cases beyond TCGA in clinical cancer study domains.

Analyses of hypothetical nuclear criticality excursions in 10- and 20-MW freezer/sublimer vessels

International Nuclear Information System (INIS)

Haught, C.F.; Jordan, W.C.; Basoglu, B.; Dodds, H.L.; Wilkinson, A.D.

1995-01-01

A theoretical model is used to predict the consequences of a postulated hypothetical nuclear criticality excursion in a freezer/sublimer (F/S). Previous work has shown that an intrusion of water into a F/S may result in a critical configuration. A first attempt is made to model the neutronic and thermal-hydraulic phenomena occurring during a criticality excursion involving both uranium hexafluoride (UF 6 ) and uranyl fluoride (UO 2 F 2 ) solution, which is present in the F/S during upset conditions. The model employs point neutronics coupled with simple thermal hydraulics. Reactivity feedback from changes in the properties of the system are included in the model. The excursion is studied in a 10-MW F/S with an initial load of 3,500 kg of 5% weight enriched UF 6 and in a 20-MW F/S with an initial load of 6,800 kg of 2% weight enriched UF 6 . The magnitude of the fission release determined in this work is 5.93 x 10 18 fissions in the 10-MW F/S and 4.21 x 10 18 fissions in the 20-MW F/S. In order to demonstrate the reliability of the techniques used in this work, a limited validation study was conducted by comparing the fission release and peak fission rate determined by this work with experimental results for a limited number of experiments. The agreement between calculations and experiments in the validation study is considered to be satisfactory. The calculational results for the hypothetical accidents in the two F/S vessels appear reasonable

Conceptual design of repository facilities

International Nuclear Information System (INIS)

Beale, H.; Engelmann, H.J.; Souquet, G.; Mayence, M.; Hamstra, J.

1980-01-01

As part of the European Economic Communities programme of research into underground disposal of radioactive wastes repository design studies have been carried out for application in salt deposits, argillaceous formations and crystalline rocks. In this paper the design aspects of repositories are reviewed and conceptual designs are presented in relation to the geological formations under consideration. Emphasis has been placed on the disposal of vitrified high level radioactive wastes although consideration has been given to other categories of radioactive waste

GreyGuide Forum and Repository

OpenAIRE

Biagioni, Stefania; Farace, Dominic

2014-01-01

We present the GreyGuide: an online forum and repository of good practice in the field of grey literature. The launch of the GreyGuide Repository took place in December 2013 at the Fifteenth International Conference on Grey Literature. Since then, the acquisition of both proposed and published good practices are underway. The GreyGuide as an online forum is currently in a developmental stage and is influenced by the changes that have taken place in GreyNet's new infrastructure commencing in J...

Ventilation System Strategy for a Prospective Korean Radioactive Waste Repository

International Nuclear Information System (INIS)

Kim, Jin; Kwon, Sang Ki

2005-01-01

In the stage of conceptual design for the construction and operation of the geologic repository for radioactive wastes, it is important to consider a repository ventilation system which serves the repository working environment, hygiene and safety of the public at large, and will allow safe maintenance like moisture content elimination in repository for the duration of the repositories life, construction/operation/closure, also allowing safe waste transportation and emplacement. This paper describes the possible ventilation system design criteria and requirements for the prospective Korean radioactive waste repositories with emphasis on the underground rock cavity disposal method in the both cases of low and medium-level and high-level wastes. It was found that the most important concept is separate ventilation systems for the construction (development) and waste emplacement (storage) activities. In addition, ventilation network system modeling, natural ventilation, ventilation monitoring systems and real time ventilation simulation, and fire simulation and emergency system in the repository are briefly discussed.

Types of safety assessments of near surface repository for radioactive waste

International Nuclear Information System (INIS)

Mateeva, M.

2004-01-01

The purpose of this article is to presents the classification of different types safety assessments of near surface repository for low and intermediate level radioactive waste substantiated with results of safety assessments generated in Bulgaria. The different approach of safety assessments applied for old existing repository as well as for site selection for construction new repository is outlined. The regulatory requirements in Bulgaria define three main types of assessments: Safety assessment; Technical substation of repository safety; Assessment of repository influence on environment that is in form of report prepared from the Ministry of environment and waters on the base of results obtained in two first types of assessments. Additionally first type is subdivided in three categories - preliminary safety assessment, safety assessment and post closure safety assessment, which are generated using deterministic approach. The technical substation of repository safety is generated using probabilistic approach. Safety assessment results that are presented here are based on evaluation of existing old repository type 'Radon' in Novi Han and real site selection procedure for new near surface repository for low and intermediate level radioactive waste from nuclear power station in Kozloduy. The important role of safety assessment for improvement the repository safety as well as for repository licensing, correct site selection and right choice of engineer barriers and repository design is discussed using generated results. (author)

Data Stewardship: Environmental Data Curation and a Web-of-Repositories

Directory of Open Access Journals (Sweden)

Karen S. Baker

2009-10-01

Full Text Available Scientific researchers today frequently package measurements and associated metadata as digital datasets in anticipation of storage in data repositories. Through the lens of environmental data stewardship, we consider the data repository as an organizational element central to data curation. One aspect of non-commercial repositories, their distance-from-origin of the data, is explored in terms of near and remote categories. Three idealized repository types are distinguished – local, center, and archive - paralleling research, resource, and reference collection categories respectively. Repository type characteristics such as scope, structure, and goals are discussed. Repository similarities in terms of roles, activities and responsibilities are also examined. Data stewardship is related to care of research data and responsible scientific communication supported by an infrastructure that coordinates curation activities; data curation is defined as a set of repeated and repeatable activities focusing on tending data and creating data products within a particular arena. The concept of “sphere-of-context” is introduced as an aid to distinguishing repository types. Conceptualizing a “web-of-repositories” accommodates a variety of repository types and represents an ecologically inclusive approach to data curation.

Institutional repository in communication: the REPOSCOM project implemented in the digital libraries federation of communication science

Directory of Open Access Journals (Sweden)

Sueli Mara Soares Pinto Ferreira

2007-01-01

Full Text Available Considering the conceptualization, characterization and context of the institutional repositories (IR this paper discuss the procedures, policies and strategies delineated to the implementation of IR in a research environment. The object of discussion is the project called Reposcom - Institutional Repository of Intercom (Brazilian Society of Interdisciplinary Studies of Communication – which is part of a broader project managed by the Portcom – Information Network in Communication Sciences of Countries of Portuguese Language – and called Digital Libraries Federation in the Communication Sciences. Aiming to share the knowledge and experience acquired with the implementation of the Reposcom, this paper describes its work activities, the decisions made, the customization of the software DSpace (the technological solution and the initial results achieved with the project.

Natural analogue studies in crystalline rock: the influence of water-bearing fractures on radionuclide immobilisation in a granitic rock repository

International Nuclear Information System (INIS)

Alexander, W.R.; MacKenzie, A.B.; Scott, R.D.; McKinley, I.G.

1990-06-01

Current Swiss concepts for the disposal of radioactive waste involve disposal in deep mined repositories to ensure that only insignificant quantities of radionuclides will ever reach the surface and so enter the biosphere. The rock formations presently considered as potential candidates for hosting radwaste repositories have thus been selected on the basis of their capacity to isolate radionuclides from the biosphere. An important factor in ensuring such containment is a very low solute transport rate through the host formation. However, it is considered likely that, in the formations of interest in the Swiss programme (eg. granites, argillaceous sediments, anhydrite), the rocks will be fractured to some extent even at repository depth. In the instance of the cumulative failure of near-field barriers in the repository, these hydraulically connected fractures in the host formation could be very important far-field routes of migration (and possible sites of retardation) of radionuclides dissolved in the groundwaters. In this context, the so-called 'matrix diffusion' mechanism is potentially very important for radionuclide retardation. This report is the culmination of a programme which has attempted to assess the potential influence of these water-bearing fractures on radionuclide transport in a crystalline rock radwaste repository. 162 refs., 36 figs., 16 tabs

Harvesting NASA's Common Metadata Repository

Science.gov (United States)

Shum, D.; Mitchell, A. E.; Durbin, C.; Norton, J.

2017-12-01

As part of NASA's Earth Observing System Data and Information System (EOSDIS), the Common Metadata Repository (CMR) stores metadata for over 30,000 datasets from both NASA and international providers along with over 300M granules. This metadata enables sub-second discovery and facilitates data access. While the CMR offers a robust temporal, spatial and keyword search functionality to the general public and international community, it is sometimes more desirable for international partners to harvest the CMR metadata and merge the CMR metadata into a partner's existing metadata repository. This poster will focus on best practices to follow when harvesting CMR metadata to ensure that any changes made to the CMR can also be updated in a partner's own repository. Additionally, since each partner has distinct metadata formats they are able to consume, the best practices will also include guidance on retrieving the metadata in the desired metadata format using CMR's Unified Metadata Model translation software.

Informing future societies about nuclear waste repositories

International Nuclear Information System (INIS)

Jensen, M.

1994-01-01

In 1990 a working group of the NKS (the Nordic nuclear safety program) was formed and give the task of established a basis for a common Nordic view of the need for information conservation for nuclear waste repositories. The Group investigated what tipy of information should be conserved; in what form the information should be kept; the quality of the information; and the problems of future retrieval of information, including retrieval after very long periods of time. Topics covered include the following: scientific aspects including social context of scientific solutions; information management; systems for conservation and retrieval of information including the problems of prediction; archives, markers, archives vs. markers, and continuing processes in society; Archive media including paper documents, microfilm, digital media, media lifetimes; and finally conclusions and recommendations

Core Certification of Data Repositories: Trustworthiness and Long-Term Stewardship

Science.gov (United States)

de Sherbinin, A. M.; Mokrane, M.; Hugo, W.; Sorvari, S.; Harrison, S.

2017-12-01

Scientific integrity and norms dictate that data created and used by scientists should be managed, curated, and archived in trustworthy data repositories thus ensuring that science is verifiable and reproducible while preserving the initial investment in collecting data. Research stakeholders including researchers, science funders, librarians, and publishers must also be able to establish the trustworthiness of data repositories they use to confirm that the data they submit and use remain useful and meaningful in the long term. Data repositories are increasingly recognized as a key element of the global research infrastructure and the importance of establishing their trustworthiness is recognised as a prerequisite for efficient scientific research and data sharing. The Core Trustworthy Data Repository Requirements are a set of universal requirements for certification of data repositories at the core level (see: https://goo.gl/PYsygW). They were developed by the ICSU World Data System (WDS: www.icsu-wds.org) and the Data Seal of Approval (DSA: www.datasealofapproval.org)—the two authoritative organizations responsible for the development and implementation of this standard to be further developed under the CoreTrustSeal branding . CoreTrustSeal certification of data repositories involves a minimally intensive process whereby repositories supply evidence that they are sustainable and trustworthy. Repositories conduct a self-assessment which is then reviewed by community peers. Based on this review CoreTrustSeal certification is granted by the CoreTrustSeal Standards and Certification Board. Certification helps data communities—producers, repositories, and consumers—to improve the quality and transparency of their processes, and to increase awareness of and compliance with established standards. This presentation will introduce the CoreTrustSeal certification requirements for repositories and offer an opportunity to discuss ways to improve the contribution of

United States Crystalline Repository Project - key research areas

International Nuclear Information System (INIS)

Patera, E.S.

1986-01-01

The Crystalline Repository Project is responsible for siting the second high-level nuclear waste repository in crystalline rock for the US Department of Energy. A methodology is being developed to define data and information needs and a way to evaluate that information. The areas of research the Crystalline Repository Project is involved in include fluid flow in a fractured network, coupled thermal, chemical and flow processes and cooperation in other nations and OECD research programs

Explaining the discrepancy between intentions and actions: the case of hypothetical bias in contingent valuation

Science.gov (United States)

Icek Ajzen; Thomas C. Brown; Franklin Carvajal

2004-01-01

An experiment was designed to account for intention-behavior discrepancies by applying the theory of planned behavior to contingent valuation. College students (N = 160) voted in hypothetical and real payment referenda to contribute $8 to a scholarship fund. Overestimates of willingness to pay in the hypothetical referendum could not be attributed to moderately...

Towards Content Development For Institutional Digital Repository ...

African Journals Online (AJOL)

The growth in Information and Communication Technology has lead to the emergence of Institutional Digital Repository, a digital archive for the preservation and dissemination of institutional research outputs. Institutional Digital Repositories make possible global dissemination of research outputs through the use of the ...

Groundwater flow modelling of an abandoned partially open repository

Energy Technology Data Exchange (ETDEWEB)

Bockgaard, Niclas (Golder Associates AB (Sweden))

2010-12-15

As a part of the license application, according to the nuclear activities act, for a final repository for spent nuclear fuel at Forsmark, the Swedish Nuclear Fuel and Waste Management Company (SKB) has undertaken a series of groundwater flow modelling studies. These represent time periods with different hydraulic conditions and the simulations carried out contribute to the overall evaluation of the repository design and long-term radiological safety. The modelling study presented here serves as an input for analyses of so-called future human actions that may affect the repository. The objective of the work was to investigate the hydraulic influence of an abandoned partially open repository. The intention was to illustrate a pessimistic scenario of the effect of open tunnels in comparison to the reference closure of the repository. The effects of open tunnels were studied for two situations with different boundary conditions: A 'temperate' case with present-day boundary conditions and a generic future 'glacial' case with an ice sheet covering the repository. The results were summarized in the form of analyses of flow in and out from open tunnels, the effect on hydraulic head and flow in the surrounding rock volume, and transport performance measures of flow paths from the repository to surface

Groundwater flow modelling of an abandoned partially open repository

International Nuclear Information System (INIS)

Bockgaard, Niclas

2010-12-01

As a part of the license application, according to the nuclear activities act, for a final repository for spent nuclear fuel at Forsmark, the Swedish Nuclear Fuel and Waste Management Company (SKB) has undertaken a series of groundwater flow modelling studies. These represent time periods with different hydraulic conditions and the simulations carried out contribute to the overall evaluation of the repository design and long-term radiological safety. The modelling study presented here serves as an input for analyses of so-called future human actions that may affect the repository. The objective of the work was to investigate the hydraulic influence of an abandoned partially open repository. The intention was to illustrate a pessimistic scenario of the effect of open tunnels in comparison to the reference closure of the repository. The effects of open tunnels were studied for two situations with different boundary conditions: A 'temperate' case with present-day boundary conditions and a generic future 'glacial' case with an ice sheet covering the repository. The results were summarized in the form of analyses of flow in and out from open tunnels, the effect on hydraulic head and flow in the surrounding rock volume, and transport performance measures of flow paths from the repository to surface

Earthquakes - a danger to deep-lying repositories?

International Nuclear Information System (INIS)

2012-03-01

This booklet issued by the Swiss National Cooperative for the Disposal of Radioactive Waste NAGRA takes a look at geological factors concerning earthquakes and the safety of deep-lying repositories for nuclear waste. The geological processes involved in the occurrence of earthquakes are briefly looked at and the definitions for magnitude and intensity of earthquakes are discussed. Examples of damage caused by earthquakes are given. The earthquake situation in Switzerland is looked at and the effects of earthquakes on sub-surface structures and deep-lying repositories are discussed. Finally, the ideas proposed for deep-lying geological repositories for nuclear wastes are discussed

Stream-simulation experiments for waste-repository investigations

International Nuclear Information System (INIS)

Seitz, M.G.

1980-01-01

The potential for radionuclide migration by groundwater flow from a breached-water repository depends on the leaching process and on chemical changes that might occur as the radionuclide moves away from the repository. Therefore, migration involves the interactions of leached species with (1) the waste and canister, (2) the engineered barrier, and (3) the geologic materials surrounding the repository. Rather than attempt to synthesize each species and study it individually, another approach is to integrate all species and interactions using stream-simulation experiments. Interactions identified in these studies can then be investigated in detail in simpler experiments

The function of packing materials in a high-level nuclear waste repository and some candidate materials: Salt Repository Project

International Nuclear Information System (INIS)

Bunnell, L.R.; Shade, J.W.

1987-03-01

Packing materials should be included in waste package design for a high-level nuclear waste repository in salt. A packing material barrier would increase confidence in the waste package by alleviating possible shortcomings in the present design and prolonging confinement capabilities. Packing materials have been studied for uses in other geologic repositories; appropriately chosen, they would enhance the confinement capabilities of salt repository waste packages in several ways. Benefits of packing materials include retarding or chemically modifying brines to reduce corrosion of the waste package, providing good thermal conductivity between the waste package and host rock, retarding or absorbing radionuclides, and reducing the massiveness of the waste package. These benefits are available at low percentage of total repository cost, if the packing material is properly chosen and used. Several candidate materials are being considered, including oxides, hydroxides, silicates, cement-based mixtures, and clay mixtures. 18 refs

Alteration of national glass in radioactive waste repository host rocks: A conceptional review

International Nuclear Information System (INIS)

Apps, J.A.

1987-01-01

The storage of high-level radioactive wastes in host rocks containing natural glass has potential chemical advantages, especially if the initial waste temperatures are as high as 250 0 C. However, it is not certain how natural glasses will decompose when exposed to an aqueous phase in a repository environment. The hydration and devitrification of both rhyolitic and natural basaltic natural glasses are reviewed in the context of hypothetical thermodynamic phase relations, infrared spectroscopic data and laboratory studies of synthetic glasses exposed to steam. The findings are compared with field observations and laboratory studies of hydrating and devitrifying natural glasses. The peculiarities of the dependence of hydration and devitrification behavior on compositional variation is noted. There is substantial circumstantial evidence to support the belief that rhyolitic glasses differ from basaltic glasses in their thermodynamic stability and their lattice structure, and that this is manifested by a tendency of the former to hydrate rather than devitrify when exposed to water. Further research remains to be done to confirm the differences in glass structure, and to determine both physically and chemically dependent properties of natural glasses as a function of composition

Local-scale modelling of density-driven flow for the phases of repository operation and post-closure at Beberg

International Nuclear Information System (INIS)

Jaquet, O.; Siegel, P.

2004-09-01

repository during the operational phase. Scoping calculations have shown that the results could be improved by applying free-surface boundary conditions when modelling the impact of the repository. Modelling density-driven flow at local scale with a repository under atmospheric pressure conditions is feasible using CONNECTFLOW/NAMMU. Such non-linear problems are intrinsically difficult to solve and linked with numerical difficulties. In particular, we could overcome the numerous convergence issues but it was demanding in terms of computing performance. Concerning pre-processing, this study has allowed us to improve the integration of CONNECTFLOW/NAMMU within Colenco's computing environment. It is especially noteworthy that numerical calculations with complex geometries (e.g. repository layout with tunnels) have become possible. During the phases of repository operation and post-closure, near-surface effects are likely to occur. The evaluation of their environmental impacts needs to be performed using a numerical model with specific boundary conditions (free surface type). The following recommendations are proposed regarding additional work and open issues: Assessment of the environmental impacts in relation to the phases of repository operation and post-closure. Evaluation of repository impact using a more detailed geometry for the repository layout, such as introducing the shafts and access tunnels as well as including skin effect around the tunnels. Determination of repository impact by modelling density-driven flow including the rock matrix diffusion of salt. The approach for modelling repository impact at Beberg has successfully described the assumed conditions and relevant processes. It may certainly serve as a well founded base for future modelling tasks to provide solutions to further questions

Reference Design Description for a Geologic Repository, Rev. 03, ICN 02

International Nuclear Information System (INIS)

Gerald Shideler

2001-01-01

of the waste materials will result in fission products that pose a minimal radiological hazard to the public afterward. For example, after 100 years, the relative hazard from the waste fission products will have diminished approximately 90 percent. After 1,000 years, the hazard will have diminished 99 percent, and after 10,000 years it will have diminished 99.9 percent. The resulting radiological hazard after 10,000 years is minimal, being of the same order of magnitude as that posed by 0.2 percent uranium ore, which is equivalent to that which was used to originally produce the nuclear fuel. Because developing such a repository is extremely complex, the design will move forward in three stages: Site Recommendation, License Application, and Construction. This document presents the design as it will be submitted in the Site Recommendation Consideration Report; the design will be updated as the design process moves forward. As more cost-effective solutions, technical advancements, or changes to requirements occur, the design may evolve. The U.S. Department of Energy's (DOE) Office of Civilian Radioactive Waste Management is developing a system that includes this potential repository. This waste management system integrates acceptance, transportation, storage, and disposal of spent nuclear fuel and high-level radioactive waste. Acceptance and transportation will be handled by regional servicing contractors under contract to the DOE. The U.S. Nuclear Regulatory Commission will conduct an in-depth and thorough licensing review to determine the acceptability of the proposed waste management system. Eight sections of this document follow. Section 2 discusses the design requirements for the proposed repository. Section 3 describes the physical layout of the proposed repository. Section 4 describes the evolutionary phases of the development of the proposed repository. Section 5 describes the receipt of waste. Section 6 details the various systems that will package the waste

Representation of an open repository in groundwater flow models

International Nuclear Information System (INIS)

Painter, Scott; Sun, Alexander

2005-08-01

The effect of repository tunnels on groundwater flow has been identified as a potential issue for the nuclear waste repository being considered by SKB for a fractured granite formation in Sweden. In particular, the following pre-closure and post-closure processes have been identified as being important: inflows into open tunnels as functions of estimated grouting efficiencies, drawdown of the water table in the vicinity of the repository, upcoming of saline water, 'turnover' of surface water in the upper bedrock, and resaturation of backfilled tunnels following repository closure. The representation of repository tunnels within groundwater models is addressed in this report. The primary focus is on far-field flow that is modeled with a continuum porous medium approximation. Of particular interest are the consequences of the tunnel representation on the transient response of the groundwater system to repository operations and repository closure, as well as modeling issues such as how the water-table free surface and the coupling to near-surface hydrogeology should be handled. The overall objectives are to understand the consequences of current representations and to identify appropriate approximations for representing open tunnels in future groundwater modeling studies. The following conclusions can be drawn from the results of the simulations: 1. Two-phase flow may be induced in the vicinity of repository tunnels during repository pre-closure operations, but the formation of a two-phase flow region will not significantly affect far-field flow or inflows into tunnels. 2. The water table will be drawn down to the repository horizon and tunnel inflows will reach a steady-state value within about 5 years. 3. Steady-state inflows at the repository edge are estimated to be about 250 m 3 /year per meter of tunnel. Inflows will be greater during the transient de-watering period and less for tunnel locations closer to the repository center. 4. Significant amounts of water

Representation of an open repository in groundwater flow models

Energy Technology Data Exchange (ETDEWEB)

Painter, Scott; Sun, Alexander [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

2005-08-01

The effect of repository tunnels on groundwater flow has been identified as a potential issue for the nuclear waste repository being considered by SKB for a fractured granite formation in Sweden. In particular, the following pre-closure and post-closure processes have been identified as being important: inflows into open tunnels as functions of estimated grouting efficiencies, drawdown of the water table in the vicinity of the repository, upcoming of saline water, 'turnover' of surface water in the upper bedrock, and resaturation of backfilled tunnels following repository closure. The representation of repository tunnels within groundwater models is addressed in this report. The primary focus is on far-field flow that is modeled with a continuum porous medium approximation. Of particular interest are the consequences of the tunnel representation on the transient response of the groundwater system to repository operations and repository closure, as well as modeling issues such as how the water-table free surface and the coupling to near-surface hydrogeology should be handled. The overall objectives are to understand the consequences of current representations and to identify appropriate approximations for representing open tunnels in future groundwater modeling studies. The following conclusions can be drawn from the results of the simulations: 1. Two-phase flow may be induced in the vicinity of repository tunnels during repository pre-closure operations, but the formation of a two-phase flow region will not significantly affect far-field flow or inflows into tunnels. 2. The water table will be drawn down to the repository horizon and tunnel inflows will reach a steady-state value within about 5 years. 3. Steady-state inflows at the repository edge are estimated to be about 250 m{sup 3}/year per meter of tunnel. Inflows will be greater during the transient de-watering period and less for tunnel locations closer to the repository center. 4. Significant

Genome-wide screens for expressed hypothetical proteins

DEFF Research Database (Denmark)

Madsen, Claus Desler; Durhuus, Jon Ambæk; Rasmussen, Lene Juel

2012-01-01

A hypothetical protein (HP) is defined as a protein that is predicted to be expressed from an open reading frame, but for which there is no experimental evidence of translation. HPs constitute a substantial fraction of proteomes of human as well as of other organisms. With the general belief that...... that the majority of HPs are the product of pseudogenes, it is essential to have a tool with the ability of pinpointing the minority of HPs with a high probability of being expressed....

The industrial organization of the repository. Pitfall or logical?

International Nuclear Information System (INIS)

Frostenson, Magnus

2010-11-01

From a systems perspective the organization of the Swedish final repository project for nuclear waste is studied. Different aspects of organization are identified in the report, covering dimensions of geographical, operative, structural, responsibility and contextual organization. Following SKB's site selection for the applications for the final repository for spent nuclear system and the closing of the surplus value agreement, issues concerning operative, structural and contextual organization tend to become particularly pressing, which is reflected in three research questions: - How will the final repository project be organized operatively and structurally over time? - Why is the final repository project organized in this way by SKB? - What kind of contextual organization takes place in the final repository project and what are the consequences of these activities? How the different industrial units of the final repository project should be run and within which structure, for example concerning ownership and integration of units, is established in the report. SKB's reasons for choosing this kind of organization are also highlighted. Apart from legal and safety-related demands that must be met together with the demands of the owners, SKB's strategic preference for insourcing conditions organizational choices. The traditional task centred operative and structural organization of SKB is also reflected in the organizational choices for the present and future units of the final depository system. Contextual organization implies deepened actor relationships between SKB's owners and SKB on the one side and the municipalities Oesthammar and Oskarshamn on the other. Through active organizing, the final repository arena 'narrows down' and the final repository issue turns into an in many respects local issue. There is a clear tendency that the roles of SKB are multiplied in order to handle the demands that central stakeholders - in particular the municipalities - place on

Transfer systems in an underground repository

International Nuclear Information System (INIS)

Berg, H.P.; Ehrlich, D.

1991-01-01

In addition to logistic problem definitions taking into account the waste types of the wastes to be disposed of and the mining conditions, transport and handling of radioactive wastes in a repository, particularly require the keeping of safety technological marginal conditions mainly resulting from the accident analyses carried out. The realization of these safety technological aspects is described taking the planned Konrad repository as an example. (author)

Asset Reuse of Images from a Repository

Science.gov (United States)

Herman, Deirdre

2014-01-01

According to Markus's theory of reuse, when digital repositories are deployed to collect and distribute organizational assets, they supposedly help ensure accountability, extend information exchange, and improve productivity. Such repositories require a large investment due to the continuing costs of hardware, software, user licenses, training,…

Classifying decommissioning wastes for allocation to appropriate final repositories

International Nuclear Information System (INIS)

Alder, J.C.; Tunaboylu, K.

1982-01-01

For the safe disposal of radioactive wastes in different repositories, it is of advantage to classify them in well-defined conditioned categories, appropriate for final disposal. These categories, the so-called waste sorts are characterized by similar radionuclide distribution, similar nuclide-specific activity concentrations and similar waste matrix. A methodology is presented for classifying decommissioning wastes and is applied to the decommissioning wastes arising from a Swiss program of 6 GWe. The amounts and nuclide-specific activity inventories of the decommissioning waste sorts have been estimated. A first allocation into two different repository types has been performed. Such a classification enables one to define the source parameters for repository safety analysis and allows one to allocate the different waste categories into appropriate final repositories. This work presents a first iteration to determine which waste sorts belong to which repository type. The characteristics of waste sorts have to be better defined and the protective strength of the repository barriers has to be optimized. 7 references, 2 figures, 4 tables

Shaft placement in a bedded salt repository

International Nuclear Information System (INIS)

Klasi, M.L.

1982-10-01

Preferred shaft pillar sizes and shaft locations were determined with respect to the induced thermal stresses in a generic bedded salt repository at a depth of 610 m with a gross thermal loading of 14.8 W/m 2 . The model assumes isotropic material properties, plane strain and linear elastic behavior. Various shaft locations were analyzed over a 25 year period. The thermal results show that for this time span, the stratigraphy is unimportant except for the region immediately adjacent to the repository. The thermomechanical results show that for the given repository depth of 610 m, a minimum central shaft pillar radius of 244 m is required to equal the material strength in the barrier pillar. An assumed constant stress and constant temperature distribution creep model of the central shaft region adjacent to the repository conservatively overestimates a creep closure of 310 mm in a 6.1 m diameter centrally-located shaft

Safety analysis of the VLJ repository

International Nuclear Information System (INIS)

Vieno, T.; Nordman, H.

1991-05-01

The VLJ repository is an underground disposal facility for the low and medium level waste generated at the Olkiluoto nuclear power plant. The repository is located within 1 km from TVO I and TVO II (2 x 710 MWe) BWR's on the Olkiluoto island at the west coast of Finland. It contains two rock silos excavated at the depth of 60...100 meters in the bedrock. Low level waste will be disposed of in a shotcreted rock silo. For bituminized medium level waste, a separate silo of reinforced concrete has been built inside the shotcreted rock silo. The post-closure safety analysis has been done for the Final Safety Analysis Report (FSAR) of the VLJ repository. In addition to the normal evolution scenario, several disturbed evolution and accident scenarios have been analysed. In the reference scenario, radio-nuclides are assumed to be released from the bituminized waste within 500 years, the concrete silo is assumed to gradually disintegrate and finally to collapse at 5 000 years, all concrete in the silo is assumed to be also chemically depleted within 6 000 years, and all the seals of the repository are assumed to deteriorate within 12 000 years. The ability of alone natural barriers to restrict the release of radionuclides into the biosphere has been evaluated by means of scenarios where the degradation of engineered barriers has been assumed to take place at a still faster rate. In one of the disturbed evolution scenarios it has been assumed that the concrete silo for medium level waste is severely impaired immediately after sealing of the repository. Effects of gas generation and consequences of human intrusion have been evaluated, too. The results of the safety analysis show that radiation doses of any significance are caused only if a well is bored in the vicinity of the repository or if the groundwater discharge spot is inhabited and used for cultivation. In the reference scenario the maximum expectation value of the individual dose rate is 0.3 mSv/a

Temperature field due to time-dependent heat sources in a large rectangular grid. Application for the KBS-3 repository

International Nuclear Information System (INIS)

Probert, T.; Claesson, Johan

1997-04-01

In the KBS-3 concept canisters containing nuclear waste are deposited along parallel tunnels over a large rectangular area deep below the ground surface. The temperature field in rock due to such a rectangular grid of heat-releasing canisters is studied. An analytical solution for this problem for any heat source has been presented in a preceding paper. The complete solution is summarized in this paper. The solution is by superposition divided into two main parts. There is a global temperature field due to the large rectangular canister area, while a local field accounts for the remaining heat source problem. In this sequel to the first report, the local solution is discussed in detail. The local solution consists of three parts corresponding to line heat sources along tunnels, point heat sources along a tunnel and a line heat source along a canister. Each part depends on two special variables only. These parts are illustrated in dimensionless form. Inside the repository the local temperature field is periodic in the horizontal directions and has a short extent in the vertical direction. This allows us to look at the solution in a parallelepiped around a canister. The solution in the parallelepiped is valid for all canisters that are not too close to the repository edges. The total temperature field is calculated for the KBS-3 case. The temperature field is calculated using a heat release that is valid for the first 10 000 years after deposition. The temperature field is shown in 23 figures in order to illustrate different aspects of the complex thermal process

Analysis of hypothetical LMFBR whole-core accidents in the USA

International Nuclear Information System (INIS)

Ferguson, D.R.; Deitrich, L.W.; Brown, N.W.; Waltar, A.E.

1978-01-01

Methods used for analysis of material behaviour, accident phenomenology and integrated accident calculations are reviewed. Applications of these methods to hypothetical LOF and TOP accidents are discussed. Recent results obtained from applications to FFTF and CRBRP are presented. (author)

Diversion path analysis for the Swedish geological repository

International Nuclear Information System (INIS)

Fritzell, Anni; Meer, Klaas Van Der

2008-02-01

The Swedish strategy to handle the spent fuel from the nuclear power plants is direct disposal in a geological repository. The safeguards regime covering all nuclear material in the state will be expanded to cover the new repository, which will require a novel safeguards approach due mainly to the inaccessibility of the fuel after disposal. The safeguards approach must be able to provide a high level of assurance that the fuel in the repository not diverted, but must also be resource efficient. An attractive approach with regards to use of resources is to monitor only the access points to the repository, i.e. the openings. The implementation of such an approach can only be allowed if it is shown to be sufficiently secure. With the purpose of determining the applicability of this 'black box' approach, a diversion path analysis for the Swedish geological repository has been carried out. The result from the analysis shows that all credible diversion paths could be covered by the black-box safeguards approach provided that the identified boundary conditions can be met

Diversion path analysis for the Swedish geological repository

Energy Technology Data Exchange (ETDEWEB)

Fritzell, Anni (Dept. of Physics and Astronomy, Uppsala Univ., Uppsala (Sweden)); Meer, Klaas Van Der (Belgian Nuclear Research Center SCK.CEN (BG))

2008-02-15

The Swedish strategy to handle the spent fuel from the nuclear power plants is direct disposal in a geological repository. The safeguards regime covering all nuclear material in the state will be expanded to cover the new repository, which will require a novel safeguards approach due mainly to the inaccessibility of the fuel after disposal. The safeguards approach must be able to provide a high level of assurance that the fuel in the repository not diverted, but must also be resource efficient. An attractive approach with regards to use of resources is to monitor only the access points to the repository, i.e. the openings. The implementation of such an approach can only be allowed if it is shown to be sufficiently secure. With the purpose of determining the applicability of this 'black box' approach, a diversion path analysis for the Swedish geological repository has been carried out. The result from the analysis shows that all credible diversion paths could be covered by the black-box safeguards approach provided that the identified boundary conditions can be met

Salt Repository Project shaft design guide: Revision 0

International Nuclear Information System (INIS)

1987-12-01

The Salt Repository Project (SRP) Shaft Design Guide (SDG) and the accompanying SRP Input to Seismic Design define the basic approach for developing appropriate shaft designs for a high-level nuclear waste repository in salt at a proposed site in Deaf Smith County, Texas. The SDG is based on current mining industry standards and practices enhanced to meet the special needs of an underground nuclear waste repository. It provides a common approach for design of both the exploratory and repository shafts. The SDG defines shaft lining and material concepts and presents methods for calculating the loads and displacements that will be imposed on lining structures. It also presents the methodology and formulae for sizing lining components. The SDG directs the shaft designer to sources of geoscience and seismic design data for the Deaf Smith County, Texas repository site. In addition, the SDG describes methods for confirming shaft lining design by means of computer analysis, and it discusses performance monitoring needs that must be considered in the design. 113 refs., 18 figs., 14 tabs

Integrating rock mechanics issues with repository design through design process principles and methodology

International Nuclear Information System (INIS)

Bieniawski, Z.T.

1996-01-01

A good designer needs not only knowledge for designing (technical know-how that is used to generate alternative design solutions) but also must have knowledge about designing (appropriate principles and systematic methodology to follow). Concepts such as open-quotes design for manufactureclose quotes or open-quotes concurrent engineeringclose quotes are widely used in the industry. In the field of rock engineering, only limited attention has been paid to the design process because design of structures in rock masses presents unique challenges to the designers as a result of the uncertainties inherent in characterization of geologic media. However, a stage has now been reached where we are be able to sufficiently characterize rock masses for engineering purposes and identify the rock mechanics issues involved but are still lacking engineering design principles and methodology to maximize our design performance. This paper discusses the principles and methodology of the engineering design process directed to integrating site characterization activities with design, construction and performance of an underground repository. Using the latest information from the Yucca Mountain Project on geology, rock mechanics and starter tunnel design, the current lack of integration is pointed out and it is shown how rock mechanics issues can be effectively interwoven with repository design through a systematic design process methodology leading to improved repository performance. In essence, the design process is seen as the use of design principles within an integrating design methodology, leading to innovative problem solving. In particular, a new concept of open-quotes Design for Constructibility and Performanceclose quotes is introduced. This is discussed with respect to ten rock mechanics issues identified for repository design and performance

Design aspects of the alpha repository. II. Conceptual layouts of underground storage facilities

International Nuclear Information System (INIS)

Grams, W.H.

1975-01-01

Five conceptual repository layouts are presented: linear repository, 1 panel; bow tie repository, 2 panels; maltese cross repository, 4 panels; snowflake repository; 5 panels, and sash window repository, 8 panels. The layouts are compared with respect to excavation requirements, haulage distances, ventilation flow path designs, and safety features

Fluid geochemistry associated associated to rocks: preliminary tests om minerals of granite rocks potentially hostess of radioactive waste repository

International Nuclear Information System (INIS)

Amorim, Lucas E.D.; Rios, Francisco J.; Oliveira, Lucilia A.R. de; Alves, James V.; Fuzikawa, Kazuo; Garcia, Luiz; Ribeiro, Yuri; Matos, Evandro C. de

2009-01-01

Fluid inclusions (FI) are micro cavities present on crystals and imprison the mineralizer fluids, and are formed during or posterior to the mineral formation. Those kind of studies are very important for orientation of the engineer barrier projects for this purpose, in order to avoid that the solutions present in the mineral FI can affect the repository walls. This work proposes the development of FI micro compositional studies in the the hostess minerals viewing the contribution for a better understanding of the solution composition present in the metamorphosis granitoid rocks. So, micro thermometric, microchemical and characterization of the material confined in the FI, and the hostess minerals. Great part of the found FI are present in the quartz and plagioclase crystals. The obtained data on the mineral compositions and their inclusions will allow to formulate hypothesis on the process which could occurs at the repository walls, decurrens from of the corrosive character (or not) of the fluids present in the FI, and propose measurements to avoid them

Digital Repositories and the Question of Data Usefulness

Science.gov (United States)

Hughes, J. S.; Downs, R. R.

2017-12-01

The advent of ISO standards for trustworthy long-term digital repositories provides both a set of principles to develop long-term data repositories and the instruments to assess them for trustworthiness. Such mandatory high-level requirements are broad enough to be achievable, to some extent, by many scientific data centers, archives, and other repositories. But the requirement that the data be useful in the future, the requirement that is usually considered to be most relevant to the value of the repository for its user communities, largely remains subject to various interpretations and misunderstanding. However, current and future users will be relying on repositories to preserve and disseminate the data and information needed to discover, understand, and utilize these resources to support their research, learning, and decision-making objectives. Therefore, further study is needed to determine the approaches that can be adopted by repositories to make data useful to future communities of users. This presentation will describe approaches for enabling scientific data and related information, such as software, to be useful for current and potential future user communities and will present the methodology chosen to make one science discipline's data useful for both current and future users. The method uses an ontology-based information model to define and capture the information necessary to make the data useful for contemporary and future users.

Nuclear waste in a repository: amount as a factor in risk duration

International Nuclear Information System (INIS)

Zen, E.

1980-01-01

The relationship between the amount of nuclear waste in a nuclear repository and the safety of the repository is examined. It is shown that the amount of a given hazardous nuclide that is potentially leachable depends on the initial amount of waste in the repository and the time that has elapsed since the repository was put into operation. Nuclear repository safety can be enhanced if repositories are designed as modular units with leach-resistant watertight compartments

Topographical survey and soil characterization of a candidate site for Radioactive Waste Repository

International Nuclear Information System (INIS)

Peconick, Diva Godoi de O.; Mourao, Rogerio P.

2015-01-01

Brazil has already initiated the establishment of a national near-surface repository for the low- and intermediate short-lived radioactive wastes generated within its territory. With two nuclear power plants in operation and a third one under construction, five active nuclear research institutes and another one planned for the intermediate future, operational constraints and social pressure built up for a disposal solution for such a waste category. The Brazilian Nuclear Commission CNEN was tasked at designing, building and commissioning this repository, which implies, among other activities, finding a suitable place for the facility. After an initial technical desk job, a federal land, not far from the NPPs, was appointed and in situ studies for the site characterization were started. This paper describes the topographical survey and soil drilling campaign carried out for the initial evaluation of the feasibility of the site vis-a-vis the applicable national regulations for site selection and disposal facilities licensing. (author)

Topographical survey and soil characterization of a candidate site for Radioactive Waste Repository

Energy Technology Data Exchange (ETDEWEB)

Peconick, Diva Godoi de O.; Mourao, Rogerio P., E-mail: godiva@cdtn.br, E-mail: mouraor@cdtn.br [Centro de Desenvolvimento da Tecnologia Nucelar (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2015-07-01

Brazil has already initiated the establishment of a national near-surface repository for the low- and intermediate short-lived radioactive wastes generated within its territory. With two nuclear power plants in operation and a third one under construction, five active nuclear research institutes and another one planned for the intermediate future, operational constraints and social pressure built up for a disposal solution for such a waste category. The Brazilian Nuclear Commission CNEN was tasked at designing, building and commissioning this repository, which implies, among other activities, finding a suitable place for the facility. After an initial technical desk job, a federal land, not far from the NPPs, was appointed and in situ studies for the site characterization were started. This paper describes the topographical survey and soil drilling campaign carried out for the initial evaluation of the feasibility of the site vis-a-vis the applicable national regulations for site selection and disposal facilities licensing. (author)

Retrievability as proposed in the US repository concept

International Nuclear Information System (INIS)

Harrington, P.G.

2000-01-01

The Nuclear Waste Policy Act states that any repository shall be designed and constructed to permit retrieval. Reasons for retrieval include public health and safety, environmental concerns, and recovery of economically valuable contents of spent nuclear fuel. The Nuclear Regulatory Commission requires that waste must be retrievable at any time up to 50 years after start of emplacement. The US Department of Energy intends to maintain a retrieval capability throughout the preclosure period. Possible preclosure periods range from a minimum of 50 years to as much as 300 years. Repository closure includes sealing all accessible portions of the repository, including ventilation shafts, access ramps and boreholes. Drip shields will be installed over the waste packages. Access to the repository after closure is not intended. The proposed repository includes horizontal emplacement drifts located in the unsaturated zone. The emplacement drift centerline spacing is 81 meters to provide a subboiling region between drifts for water drainage. A drip shield covers the waste packages. All emplacement drifts remain open until closure of the repository, providing performance benefits such as removing heat and moisture during the preclosure period and lowering postclosure temperatures. This does not impede retrieval, permitting a reversal of the emplacement process to accomplish retrieval under normal conditions. The preclosure period is therefore not to enhance retrievability, but does improve performance, and the resultant extension of the retrievability capability is a secondary effect. Information must be provided from the performance confirmation program to support a regulatory decision to close. Closure would isolate the repository from the accessible environment, preclude preferential flowpaths for water into the mountain, and minimize the possibility of inadvertent intrusion. (author)

The Relationship Between Personality and Schadenfreude in Hypothetical Versus Live Situations.

Science.gov (United States)

Greenier, Keegan D

2018-06-01

This study sought to investigate how individual differences are related to schadenfreude (pleasure derived from another's misfortune) by replicating past findings and extending them to additional personality traits. Because most past research on schadenfreude has relied heavily on the use of reactions to hypothetical scenarios, an attempt was made to demonstrate external validity by also including a reaction to a live event (confederate misfortune). For the scenarios, schadenfreude was positively correlated with the Dark Triad and just world beliefs; negatively correlated with empathy and agreeableness; and uncorrelated with dispositional envy, self-esteem, or the remaining Big Five traits. For the live event, no personality traits were correlated with schadenfreude, suggesting responses to hypothetical situations may not be representative of real-life schadenfreude events.

Restricted Predicates for Hypothetical Datalog

Directory of Open Access Journals (Sweden)

Fernando Sáenz-Pérez

2015-12-01

Full Text Available Hypothetical Datalog is based on an intuitionistic semantics rather than on a classical logic semantics, and embedded implications are allowed in rule bodies. While the usual implication (i.e., the neck of a Horn clause stands for inferring facts, an embedded implication plays the role of assuming its premise for deriving its consequence. A former work introduced both a formal framework and a goal-oriented tabled implementation, allowing negation in rule bodies. While in that work positive assumptions for both facts and rules can occur in the premise, negative assumptions are not allowed. In this work, we cover this subject by introducing a new concept: a restricted predicate, which allows negative assumptions by pruning the usual semantics of a predicate. This new setting has been implemented in the deductive system DES.

Staged Repository Development Programmes

International Nuclear Information System (INIS)

Isaacs, T

2003-01-01

Programs to manage and ultimately dispose of high-level radioactive wastes are unique from scientific and technological as well as socio-political aspects. From a scientific and technological perspective, high-level radioactive wastes remain potentially hazardous for geological time periods-many millennia-and scientific and technological programs must be put in place that result in a system that provides high confidence that the wastes will be isolated from the accessible environment for these many thousands of years. Of course, ''proof'' in the classical sense is not possible at the outset, since the performance of the system can only be known with assurance, if ever, after the waste has been emplaced for those geological time periods. Adding to this challenge, many uncertainties exist in both the natural and engineered systems that are intended to isolate the wastes, and some of the uncertainties will remain regardless of the time and expense in attempting to characterize the system and assess its performance. What was perhaps underappreciated in the early days of waste management and repository program development were the unique and intense reactions that the institutional, political, and public bodies would have to repository program development, particularly in programs attempting to identify and then select sites for characterization, design, licensing, and ultimate development. Reactions in most nations were strong, focused, unrelenting, and often successful in hindering, derailing, and even stopping national repository programs. The reasons for such reactions and the measures to successfully respond to them are still evolving and continue to be the focus of many national program and political leaders. Adaptive Staging suggests an approach to repository program development that reflects the unique challenges associated with the disposal of high-level radioactive waste. The step-wise, incremental, learn-as-you-go approach is intended to maximize the

Industrial complementarities between interim storage and reversible geological repository - 59237

International Nuclear Information System (INIS)

Hoorelbeke, Jean-Michel

2012-01-01

The French Act voted in 2006 made the choice of deep geological disposal as the reference option for the long term management of high level (HLW) and intermediate level long-lived waste. The CIGEO repository project aims at avoiding or limiting burden to future generations, which could not be achieved by the extension in time of interim storage. The reversibility as provided by the Act will maintain a liberty of choice for waste management on a duration which is comparable to new storage facility. Interim storage is required to accommodate waste as long as the repository is not available. The commissioning of the repository in 2025 will not suppress needs for interim storage. The paper describes the complementarities between existing and future interim storage facilities and the repository project: repository operational issues and planning, HLW thermal decay, support for the reversibility, etc. It shows opportunities to prepare a global optimization of waste management including the utilization at best of storage capacities and the planning of waste emplacement in the repository in such a way to facilitate operational conditions and to limit cost. Preliminary simulations of storage-disposal scenarios are presented. Thanks to an optimal use of the waste management system, provision can be made for a progressive increase of waste emplacement flow during the first operation phase of the repository. It is then possible to stabilize the industrial activity level of the repository site. An optimal utilization of interim storage can also limit the diversity of waste packages emplaced simultaneously, which facilitates the operation of the repository. 60 years minimum interim storage duration is generally required with respect to HLW thermal output. Extending this interim storage period may reduce the underground footprint of the repository. Regarding reversibility, the capability to manage waste packages potentially retrieved from the repository should be analyzed. The

Testing QCD with Hypothetical Tau Leptons

Energy Technology Data Exchange (ETDEWEB)

Brodsky, Stanley J.

1998-10-21

We construct new tests of perturbative QCD by considering a hypothetical {tau} lepton of arbitrary mass, which decays hadronically through the electromagnetic current. We can explicitly compute its hadronic width ratio directly as an integral over the e{sup +}e{sup -} annihilation cross section ratio, R{sub e{sup +}e{sup -}}. Furthermore, we can design a set of commensurate scale relations and perturbative QCD tests by varying the weight function away from the form associated with the V-A decay of the physical {tau}. This method allows the wide range of the R{sub e{sup +}e{sup -}} data to be used as a probe of perturbative QCD.

LIFE Materials: Fuel Cycle and Repository Volume 11

Energy Technology Data Exchange (ETDEWEB)

Shaw, H; Blink, J A

2008-12-12

The fusion-fission LIFE engine concept provides a path to a sustainable energy future based on safe, carbon-free nuclear power with minimal nuclear waste. The LIFE design ultimately offers many advantages over current and proposed nuclear energy technologies, and could well lead to a true worldwide nuclear energy renaissance. When compared with existing and other proposed future nuclear reactor designs, the LIFE engine exceeds alternatives in the most important measures of proliferation resistance and waste minimization. The engine needs no refueling during its lifetime. It requires no removal of fuel or fissile material generated in the LIFE engine. It leaves no weapons-attractive material at the end of life. Although there is certainly a need for additional work, all indications are that the 'back end' of the fuel cycle does not to raise any 'showstopper' issues for LIFE. Indeed, the LIFE concept has numerous benefits: (1) Per unit of electricity generated, LIFE engines would generate 20-30 times less waste (in terms of mass of heavy metal) requiring disposal in a HLW repository than does the current once-through fuel cycle. (2) Although there may be advanced fuel cycles that can compete with LIFE's low mass flow of heavy metal, all such systems require reprocessing, with attendant proliferation concerns; LIFE engines can do this without enrichment or reprocessing. Moreover, none of the advanced fuel cycles can match the low transuranic content of LIFE waste. (3) The specific thermal power of LIFE waste is initially higher than that of spent LWR fuel. Nevertheless, this higher thermal load can be managed using appropriate engineering features during an interim storage period, and could be accommodated in a Yucca-Mountain-like repository by appropriate 'staging' of the emplacement of waste packages during the operational period of the repository. The planned ventilation rates for Yucca Mountain would be sufficient for LIFE waste

LIFE Materials: Fuel Cycle and Repository Volume 11

International Nuclear Information System (INIS)

Shaw, H.; Blink, J.A.

2008-01-01

The fusion-fission LIFE engine concept provides a path to a sustainable energy future based on safe, carbon-free nuclear power with minimal nuclear waste. The LIFE design ultimately offers many advantages over current and proposed nuclear energy technologies, and could well lead to a true worldwide nuclear energy renaissance. When compared with existing and other proposed future nuclear reactor designs, the LIFE engine exceeds alternatives in the most important measures of proliferation resistance and waste minimization. The engine needs no refueling during its lifetime. It requires no removal of fuel or fissile material generated in the LIFE engine. It leaves no weapons-attractive material at the end of life. Although there is certainly a need for additional work, all indications are that the 'back end' of the fuel cycle does not to raise any 'showstopper' issues for LIFE. Indeed, the LIFE concept has numerous benefits: (1) Per unit of electricity generated, LIFE engines would generate 20-30 times less waste (in terms of mass of heavy metal) requiring disposal in a HLW repository than does the current once-through fuel cycle. (2) Although there may be advanced fuel cycles that can compete with LIFE's low mass flow of heavy metal, all such systems require reprocessing, with attendant proliferation concerns; LIFE engines can do this without enrichment or reprocessing. Moreover, none of the advanced fuel cycles can match the low transuranic content of LIFE waste. (3) The specific thermal power of LIFE waste is initially higher than that of spent LWR fuel. Nevertheless, this higher thermal load can be managed using appropriate engineering features during an interim storage period, and could be accommodated in a Yucca-Mountain-like repository by appropriate 'staging' of the emplacement of waste packages during the operational period of the repository. The planned ventilation rates for Yucca Mountain would be sufficient for LIFE waste to meet the thermal constraints of

Administrative Data Repository (ADR)

Data.gov (United States)

Department of Veterans Affairs — The Administrative Data Repository (ADR) was established to provide support for the administrative data elements relative to multiple categories of a person entity...

Investigative study of standards for Digital Repositories and related services

NARCIS (Netherlands)

Foulonneau, Muriel; André, Francis

2007-01-01

This study is meant for institutional repository managers, service providers, repository software developers and generally, all players taking an active part in the creation of the digital repository infrastructure for e-research and e-learning. It reviews the current standards, protocols and

Optimizing Resources for Trustworthiness and Scientific Impact of Domain Repositories

Science.gov (United States)

Lehnert, K.

2017-12-01

Domain repositories, i.e. data archives tied to specific scientific communities, are widely recognized and trusted by their user communities for ensuring a high level of data quality, enhancing data value, access, and reuse through a unique combination of disciplinary and digital curation expertise. Their data services are guided by the practices and values of the specific community they serve and designed to support the advancement of their science. Domain repositories need to meet user expectations for scientific utility in order to be successful, but they also need to fulfill the requirements for trustworthy repository services to be acknowledged by scientists, funders, and publishers as a reliable facility that curates and preserves data following international standards. Domain repositories therefore need to carefully plan and balance investments to optimize the scientific impact of their data services and user satisfaction on the one hand, while maintaining a reliable and robust operation of the repository infrastructure on the other hand. Staying abreast of evolving repository standards to certify as a trustworthy repository and conducting a regular self-assessment and certification alone requires resources that compete with the demands for improving data holdings or usability of systems. The Interdisciplinary Earth Data Alliance (IEDA), a data facility funded by the US National Science Foundation, operates repositories for geochemical, marine Geoscience, and Antarctic research data, while also maintaining data products (global syntheses) and data visualization and analysis tools that are of high value for the science community and have demonstrated considerable scientific impact. Balancing the investments in the growth and utility of the syntheses with resources required for certifcation of IEDA's repository services has been challenging, and a major self-assessment effort has been difficult to accommodate. IEDA is exploring a partnership model to share

Long-term environmental impacts of geologic repositories

International Nuclear Information System (INIS)

Pigford, T.H.

1983-05-01

This paper summarizes a study of the long-term environmental impacts of geologic repositories for radioactive wastes. Conceptual repositories in basalt, granite, salt, and tuff were considered. Site-specific hydrological and geochemical parameters were used wherever possible, supplemented with generic parameters when necessary. Radiation doses to future maximally exposed individuals who use the contaminated groundwater and surface water were calculated and compared with a performance criterion of 10 -4 Sv/yr for radiation exposures from probable events. The major contributors to geologic isolation are the absence of groundwater if the repository is in natural salt, the slow dissolution of key radioelements as limited by solubility and by diffusion and convection in groundwater, long water travel times from the waste to the environment, and sorption retardation in the media surrounding the repository. In addition, dilution by surface water can considerably reduce the radiation exposures that result from the small fraction of the waste radioactivity that may ultimately reach the environment. Estimates of environmental impacts are made both for unreprocessed spent fuel and for reprocessing wastes. Accelerated dissolution of waste exposed to groundwater during the period of repository heating is also considered. This study of environmental impacts is a portion of a more comprehensive study of geologic waste disposal carried out by the Waste Isolation System Panel of the US National Research Council

Computational Materials Repository

DEFF Research Database (Denmark)

Landis, David

, different abstraction levels and enables users to analyze their own results, and allows to share data with collaborators. The approach of the Computational Materials Repository (CMR) is to convert data to an internal format that maintains the original variable names without insisting on any semantics...

Geotechnical instrumentation for repository shafts

International Nuclear Information System (INIS)

Lentell, R.L.; Byrne, J.

1993-01-01

The US Congress passed the Nuclear Waste Policy Act in 1980, which required that three distinctly different geologic media be investigated as potential candidate sites for the permanent disposal of high-level nuclear waste. The three media that were selected for study were basalt (WA), salt (TX, LA, MS, UT), and tuff (NV). Preliminary Exploratory Shaft Facilities (ESF) designs were prepared for seven candidate salt sites, including bedded and domal salt environments. A bedded-salt site was selected in Deaf Smith County, TX for detailed site characterization studies and ESF Final Design. Although Congress terminated the Salt Repository Program in 1988, Final Design for the Deaf Smith ESF was completed, and much of the design rationale can be applied to subsequent deep repository shafts. This paper presents the rationale for the geotechnical instrumentation that was designed for construction and operational performance monitoring of the deep shafts of the in-situ test facility. The instrumentation design described herein can be used as a general framework in designing subsequent instrumentation programs for future high-level nuclear waste repository shafts

Radiological consequences of a human intrusion in a nuclear waste repository in a salt formation

International Nuclear Information System (INIS)

Jacquier, P.; Raimbault, P.

1989-07-01

The assessment of the consequences of human intrusion scenarios for a repository is very important for salt formations, since this material has an undeniable economic interest. In this work, the scenario considers the solution mining of salt for human consumption: salt is extracted from a cavern; by leaching, this cavern enlarges and uncovers the waste, which falls down into the sump. It was assumed that the intrusion takes place either 500 years or 2500 years after the closing of the repository. High-level vitrified waste or alpha cemented waste were considered. This paper displays the assumptions made and, using a simplified modelling of the phenomena, the estimation of the radiological consequences due to ingestion of contamined sals. A sensitivity/uncertainty analysis is presented which emphasizes several fields where experimental studies have to be pursued or launched [fr

New content in digital repositories the changing research landscape

CERN Document Server

Simons, Natasha

2013-01-01

Research institutions are under pressure to make their outputs more accessible in order to meet funding requirements and policy guidelines. Libraries have traditionally played an important role by exposing research output through a predominantly institution-based digital repository, with an emphasis on storing published works. New publishing paradigms are emerging that include research data, huge volumes of which are being generated globally. Repositories are the natural home for managing, storing and describing institutional research content. New Content in Digital Repositories explores the diversity of content types being stored in digital repositories with a focus on research data, creative works, and the interesting challenges they pose.

The near-field transport in a repository for high-level nuclear waste

Energy Technology Data Exchange (ETDEWEB)

Aranguiz, L.R.

1995-05-01

The thesis is focused on the modelling of a redox front which is created when the oxidants produced by a radiolytic process in a damaged canister escape to the surroundings, and on a fast and flexible model to calculate the radionuclide transport in the repository. In addition, the thesis includes an attempt to validate the processes involved in the redox front model and a sensitivity analysis of the uncertainties in the parameter values regarding the release of radionuclides from the Swedish KBS-3 repository. The redox front model considers that the transport of oxidants in the clay surrounding the canister is by diffusion and that the transport in the fractures in the rock is by flow with diffusion into the rock matrix.The assumed radiolysis rates denoted high and low in the thesis are probably not realistic, but can be seen as upper limits. thus it is unlikely that the redox front will ever move past the bentonite clay surrounding the canister, and if it does, the front may move less than 100 m. The model to calculate the transport of radionuclides in the near-field uses a coarse compartmentalization of the repository by embedding analytical solutions in zones where other techniques, such as finite difference methods, would need a very fine discretization. Only a few compartments are required to obtain a good accuracy in the calculated release. 34 refs, 17 figs.

The near-field transport in a repository for high-level nuclear waste

International Nuclear Information System (INIS)

Aranguiz, L.R.

1995-05-01

The thesis is focused on the modelling of a redox front which is created when the oxidants produced by a radiolytic process in a damaged canister escape to the surroundings, and on a fast and flexible model to calculate the radionuclide transport in the repository. In addition, the thesis includes an attempt to validate the processes involved in the redox front model and a sensitivity analysis of the uncertainties in the parameter values regarding the release of radionuclides from the Swedish KBS-3 repository. The redox front model considers that the transport of oxidants in the clay surrounding the canister is by diffusion and that the transport in the fractures in the rock is by flow with diffusion into the rock matrix.The assumed radiolysis rates denoted high and low in the thesis are probably not realistic, but can be seen as upper limits. thus it is unlikely that the redox front will ever move past the bentonite clay surrounding the canister, and if it does, the front may move less than 100 m. The model to calculate the transport of radionuclides in the near-field uses a coarse compartmentalization of the repository by embedding analytical solutions in zones where other techniques, such as finite difference methods, would need a very fine discretization. Only a few compartments are required to obtain a good accuracy in the calculated release. 34 refs, 17 figs

Expected environment for waste packages in a salt repository

International Nuclear Information System (INIS)

Pederson, L.R.; Clark, D.E.; Hodges, F.N.; McVay, G.L.; Rai, D.

1983-01-01

This paper discusses results of recent efforts to define the very near-field (within approximately 2 m) environmental conditions to which waste packages will be exposed in a salt repository. These conditions must be considered in the experimental design for waste package materials testing, which includes corrosion of barrier materials and leaching of waste forms. Site-specific brine compositions have been determined, and standard brine compositions have been selected for testing purposes. Actual brine compositions will vary depending on origin, temperature, irradiation history, and contact with irradiated rock salt. Results of irradiating rock salt, synthetic brines, rock salt/brine mixtures, and reactions of irradiated rock salt with brine solutions are reported. 38 references, 3 figures, 2 tables

Impact of retrievability of repository design

International Nuclear Information System (INIS)

Heijdra, J.J.; Gaag, J. v.d.; Prij, J.

1995-01-01

In this paper the impact of the retrievability on the design of the repository will be handled. Retrievability of radioactive waste from a repository in geological formations has received increasing attention during recent years. It is obvious that this retrievability will have consequences in terms of mining engineering, safety and cost. The purpose of the present study is to evaluate cost consequences by comparing two extreme options for retrievable storage. (author). 6 refs., 3 figs

Chemical risks from nuclear waste repositories

International Nuclear Information System (INIS)

Persson, L.

1988-01-01

Studies concerning the chemical risks of nuclear waste are reviewed. The radiological toxicity of the material is of primary concern but the potential nonradiological toxicity should not be overlooked as the chemotoxic substances may reach the biosphere from a nuclear waste repository. In the report is concluded that the possible chemotoxic effects of a repository for nuclear waste should be studied as a part of the formal risk assessment of the disposal concept. (author)

NIA Aging Cell Repository

Data.gov (United States)

Federal Laboratory Consortium — To facilitate aging research on cells in culture, the NIA provides support for the NIA Aging Cell Repository, located at the Coriell Institute for Medical Research...

Safety considerations of disposal of disused sealed sources in Puspokszilagy Repository, Hungary

International Nuclear Information System (INIS)

2003-01-01

accepted should be accept for temporary storage pending final disposal in geological repository. The limits of concentration of long lived components are suggested by the SA. Three action plans are developed for the solution of the problems

The SeaView EarthCube project: Lessons Learned from Integrating Across Repositories

Science.gov (United States)

Diggs, S. C.; Stocks, K. I.; Arko, R. A.; Kinkade, D.; Shepherd, A.; Olson, C. J.; Pham, A.

2017-12-01

SeaView is an NSF-funded EarthCube Integrative Activity Project working with 5 existing data repositories* to provide oceanographers with highly integrated thematic data collections in user-requested formats. The project has three complementary goals: Supporting Scientists: SeaView targets scientists' need for easy access to data of interest that are ready to import into their preferred tool. Strengthening Repositories: By integrating data from multiple repositories for science use, SeaView is helping the ocean data repositories align their data and processes and make ocean data more accessible and easily integrated. Informing EarthCube (earthcube.org): SeaView's experience as an integration demonstration can inform the larger NSF EarthCube architecture and design effort. The challenges faced in this small-scale effort are informative to geosciences cyberinfrastructure more generally. Here we focus on the lessons learned that may inform other data facilities and integrative architecture projects. (The SeaView data collections will be presented at the Ocean Sciences 2018 meeting.) One example is the importance of shared semantics, with persistent identifiers, for key integration elements across the data sets (e.g. cruise, parameter, and project/program.) These must allow for revision through time and should have an agreed authority or process for resolving conflicts: aligning identifiers and correcting errors were time consuming and often required both deep domain knowledge and "back end" knowledge of the data facilities. Another example is the need for robust provenance, and tools that support automated or semi-automated data transform pipelines that capture provenance. Multiple copies and versions of data are now flowing into repositories, and onward to long-term archives such as NOAA NCEI and umbrella portals such as DataONE. Exact copies can be identified with hashes (for those that have the skills), but it can be painfully difficult to understand the processing

Repository waste-handling operations, 1998

International Nuclear Information System (INIS)

Cottam, A.E.; Connell, L.

1986-04-01

The Civilian Radioactive Waste Management Program Mission Plan and the Generic Requirements for a Mined Geologic Disposal System state that beginning in 1998, commercial spent fuel not exceeding 70,000 metric tons of heavy metal, or a quantity of solidified high-level radioactive waste resulting from the reprocessing of such a quantity of spent fuel, will be shipped to a deep geologic repository for permanent storage. The development of a waste-handling system that can process 3000 metric tons of heavy metal annually will require the adoption of a fully automated approach. The safety and minimum exposure of personnel will be the prime goals of the repository waste handling system. A man-out-of-the-loop approach will be used in all operations including the receipt of spent fuel in shipping casks, the inspection and unloading of the spent fuel into automated hot-cell facilities, the disassembly of spent fuel assemblies, the consolidation of fuel rods, and the packaging of fuel rods into heavy-walled site-specific containers. These containers are designed to contain the radionuclides for up to 1000 years. The ability of a repository to handle more than 6000 pressurized water reactor spent-fuel rods per day on a production basis for approximately a 23-year period will require that a systems approach be adopted that combines space-age technology, robotics, and sophisticated automated computerized equipment. New advanced inspection techniques, maintenance by robots, and safety will be key factors in the design, construction, and licensing of a repository waste-handling facility for 1998

Distributed Web Service Repository

Directory of Open Access Journals (Sweden)

Piotr Nawrocki

2015-01-01

Full Text Available The increasing availability and popularity of computer systems has resulted in a demand for new, language- and platform-independent ways of data exchange. That demand has in turn led to a significant growth in the importance of systems based on Web services. Alongside the growing number of systems accessible via Web services came the need for specialized data repositories that could offer effective means of searching of available services. The development of mobile systems and wireless data transmission technologies has allowed the use of distributed devices and computer systems on a greater scale. The accelerating growth of distributed systems might be a good reason to consider the development of distributed Web service repositories with built-in mechanisms for data migration and synchronization.

Ventilation planning for a prospective nuclear waste repository

International Nuclear Information System (INIS)

Wallace, K.G. Jr.

1987-01-01

In 1982, the US Congress passed the Nuclear Waste Policy Act to provide for the development of underground repositories for spent nuclear fuel. This development will be managed by the United States Department of Energy. In 1986, the President selected three areas for site characterization to determine their suitability for the development of an underground repository; those sites were: (1) A site in volcanic tuff located at Yucca Mountain in Nevada, (2) a site in bedded salt located in Deaf Smith County in Texas, and (3) a site in basalt located in Hanford, Washington. At present conceptual repository designs are being developed for each site. A key element of a repository design is the underground ventilation system required to support construction, nuclear waste emplacement, and potential waste retrieval. This paper describes the preliminary ventilation systems designed for the repository in tuff. The concept provides separate ventilation systems for the construction and waste emplacement activities. The paper further describes the means by which acceptable environmental conditions will be re-established to allow re-entry into previously closed rooms for the purpose of inspection, maintenance or retrieval

Status of the implementation of Brazilian National Repository

International Nuclear Information System (INIS)

Tello, Cledola Cassia Oliveira de

2015-01-01

In Brazil, the use of nuclear energy and radioisotopes is increasing and it already justifies the construction of a national repository for radioactive wastes of low and intermediate-level. The Brazilian National Commission for Nuclear Energy (CNEN) is legally responsible for designing and constructing intermediate and final storages for radioactive wastes generated in all Country, in accordance to Federal Law No. 10308. Additionally, the Brazilian Environmental Regulator (IBAMA) lately is imposing to the implementation of new nuclear installations (e.g. Angra 3 NPP and Brazilian Multipurpose Reactor) that the National Repository should be in construction, before the start-up of those ones. In November 2009, the RBMN Project Charter was signed. The RBMN Project aims at the implantation of a National Repository to dispose the radioactive wastes of low- and intermediate-level. Some aspects about the Repository construction are very challenging, mainly due to the licensing process, which will be made for two different regulatory bodies, nuclear and environmental. The main achievements obtained till now are the establishment of the current Brazilian radioactive waste inventory, the conceptual design and the selection of candidate sites for the repository. The current status of the Project is summarized. (author)

Fissile solution dynamics: Student research

Energy Technology Data Exchange (ETDEWEB)

Hetrick, D.L.

1994-09-01

There are two research projects in criticality safety at the University of Arizona: one in dynamic simulation of hypothetical criticality accidents in fissile solutions, and one in criticality benchmarks using transport theory. We have used the data from nuclear excursions in KEWB, CRAC, and SILENE to help in building models for solution excursions. An equation of state for liquids containing gas bubbles has been developed and coupled to point-reactor dynamics in an attempt to predict fission rate, yield, pressure, and kinetic energy. It appears that radiolytic gas is unimportant until after the first peak, but that it does strongly affect the shape of the subsequent power decrease and also the dynamic pressure.

A Repository of Semantic Open EHR Archetypes

Directory of Open Access Journals (Sweden)

Fernando Sánchez

2015-03-01

Full Text Available This paper describes a repository of openEHR archetypes that have been translated to OWL. In the work presented here, five different CKMs (Clinical Knowledge Managers have been downloaded and the archetypes have been translated to OWL. This translation is based on an existing translator that has been improved to solve programming problems with certain structures. As part of the repository a tool has been developed to keep it always up-to-date. So, any change in one of the CKMs (addition, elimination or even change of an archetype will involve translating the changed archetypes once more. The repository is accessible through a Web interface (http://www.openehr.es/.

Reducing therapeutic misconception: A randomized intervention trial in hypothetical clinical trials.

Directory of Open Access Journals (Sweden)

Paul P Christopher

Full Text Available Participants in clinical trials frequently fail to appreciate key differences between research and clinical care. This phenomenon, known as therapeutic misconception, undermines informed consent to clinical research, but to date there have been no effective interventions to reduce it and concerns have been expressed that to do so might impede recruitment. We determined whether a scientific reframing intervention reduces therapeutic misconception without significantly reducing willingness to participate in hypothetical clinical trials.This prospective randomized trial was conducted from 2015 to 2016 to test the efficacy of an informed consent intervention based on scientific reframing compared to a traditional informed consent procedure (control in reducing therapeutic misconception among patients considering enrollment in hypothetical clinical trials modeled on real-world studies for one of five disease categories. Patients with diabetes mellitus, hypertension, coronary artery disease, head/neck cancer, breast cancer, and major depression were recruited from medical clinics and a clinical research volunteer database. The primary outcomes were therapeutic misconception, as measured by a validated, ten-item Therapeutic Misconception Scale (range = 10-50, and willingness to participate in the clinical trial.154 participants completed the study (age range, 23-87 years; 92.3% white, 56.5% female; 74 (48.1% had been randomized to receive the experimental intervention. Therapeutic misconception was significantly lower (p = 0.004 in the scientific reframing group (26.4, 95% CI [23.7 to 29.1] compared to the control group (30.9, 95% CI [28.4 to 33.5], and remained so after controlling for education (p = 0.017. Willingness to participate in the hypothetical trial was not significantly different (p = 0.603 between intervention (52.1%, 95% CI [40.2% to 62.4%] and control (56.3%, 95% CI [45.3% to 66.6%] groups.An enhanced educational intervention augmenting

Low- and intermediate-level waste repository-induced effects

Energy Technology Data Exchange (ETDEWEB)

Leupin, O.X.; Marschall, P.; Johnson, L.; Cloet, V.; Schneider, J. [National Cooperative for the Disposal of Radioactive Waste (NAGRA), Wettingen (Switzerland); Smith, P. [Safety Assessment Management Ltd, Henley-On-Thames, Oxfordshire (United Kingdom); Savage, D. [Savage Earth Associates Ltd, Bournemouth, Dorset (United Kingdom); Senger, R. [Intera Inc., Ennetbaden (Switzerland)

2016-10-15

This status report aims at describing and assessing the interactions of the radioactive waste emplaced in a low- and intermediate level waste (L/ILW) repository with the engineered materials and the Opalinus Clay host rock. The Opalinus Clay has a thickness of about 100 m in the proposed siting regions. Among other things the results are used to steer the RD and D programme of NAGRA. The repository-induced effects considered in this report are of the following broad types: - Thermal effects: i.e. effects arising principally from the heat generated by the waste and the setting of cement. - Rock-mechanical effects: i.e. effects arising from the mechanical disturbance to the rock caused by the excavation of the emplacement caverns and other underground structures. - Hydraulic and gas-related effects: i.e. the effects of repository resaturation and of gas generation, e.g. due to the corrosion of metals within the repository, on the host rock and engineered barriers. - Chemical effects: i.e. chemical interactions between the waste, the engineered materials and the host rock. Deep geological repositories are designed to avoid or mitigate the impact of potentially detrimental repository-induced effects on long-term safety. For the repository under consideration in the present report, an assessment of those repository-induced effects that remain shows that detrimental chemical and mechanical impacts are largely confined to the rock adjacent to the excavations, thermal impacts are minimal and gas effects can be mitigated by appropriate design measures to reduce gas production and provide pathways for gas transport that limit gas pressure build-up (engineered gas transport system, or EGTS). Specific measures that are part of the current reference design are discussed in relation to their significance with respect to repository-induced effects. The disposal system described in this report provides a system of passive barriers with multiple safety functions. The disposal

Low- and intermediate-level waste repository-induced effects

International Nuclear Information System (INIS)

Leupin, O.X.; Marschall, P.; Johnson, L.; Cloet, V.; Schneider, J.; Smith, P.; Savage, D.; Senger, R.

2016-10-01

This status report aims at describing and assessing the interactions of the radioactive waste emplaced in a low- and intermediate level waste (L/ILW) repository with the engineered materials and the Opalinus Clay host rock. The Opalinus Clay has a thickness of about 100 m in the proposed siting regions. Among other things the results are used to steer the RD and D programme of NAGRA. The repository-induced effects considered in this report are of the following broad types: - Thermal effects: i.e. effects arising principally from the heat generated by the waste and the setting of cement. - Rock-mechanical effects: i.e. effects arising from the mechanical disturbance to the rock caused by the excavation of the emplacement caverns and other underground structures. - Hydraulic and gas-related effects: i.e. the effects of repository resaturation and of gas generation, e.g. due to the corrosion of metals within the repository, on the host rock and engineered barriers. - Chemical effects: i.e. chemical interactions between the waste, the engineered materials and the host rock. Deep geological repositories are designed to avoid or mitigate the impact of potentially detrimental repository-induced effects on long-term safety. For the repository under consideration in the present report, an assessment of those repository-induced effects that remain shows that detrimental chemical and mechanical impacts are largely confined to the rock adjacent to the excavations, thermal impacts are minimal and gas effects can be mitigated by appropriate design measures to reduce gas production and provide pathways for gas transport that limit gas pressure build-up (engineered gas transport system, or EGTS). Specific measures that are part of the current reference design are discussed in relation to their significance with respect to repository-induced effects. The disposal system described in this report provides a system of passive barriers with multiple safety functions. The disposal

Making research data repositories visible: the re3data.org Registry.

Directory of Open Access Journals (Sweden)

Heinz Pampel

Full Text Available Researchers require infrastructures that ensure a maximum of accessibility, stability and reliability to facilitate working with and sharing of research data. Such infrastructures are being increasingly summarized under the term Research Data Repositories (RDR. The project re3data.org-Registry of Research Data Repositories-has begun to index research data repositories in 2012 and offers researchers, funding organizations, libraries and publishers an overview of the heterogeneous research data repository landscape. In July 2013 re3data.org lists 400 research data repositories and counting. 288 of these are described in detail using the re3data.org vocabulary. Information icons help researchers to easily identify an adequate repository for the storage and reuse of their data. This article describes the heterogeneous RDR landscape and presents a typology of institutional, disciplinary, multidisciplinary and project-specific RDR. Further the article outlines the features of re3data.org, and shows how this registry helps to identify appropriate repositories for storage and search of research data.

Making research data repositories visible: the re3data.org Registry.

Science.gov (United States)

Pampel, Heinz; Vierkant, Paul; Scholze, Frank; Bertelmann, Roland; Kindling, Maxi; Klump, Jens; Goebelbecker, Hans-Jürgen; Gundlach, Jens; Schirmbacher, Peter; Dierolf, Uwe

2013-01-01

Researchers require infrastructures that ensure a maximum of accessibility, stability and reliability to facilitate working with and sharing of research data. Such infrastructures are being increasingly summarized under the term Research Data Repositories (RDR). The project re3data.org-Registry of Research Data Repositories-has begun to index research data repositories in 2012 and offers researchers, funding organizations, libraries and publishers an overview of the heterogeneous research data repository landscape. In July 2013 re3data.org lists 400 research data repositories and counting. 288 of these are described in detail using the re3data.org vocabulary. Information icons help researchers to easily identify an adequate repository for the storage and reuse of their data. This article describes the heterogeneous RDR landscape and presents a typology of institutional, disciplinary, multidisciplinary and project-specific RDR. Further the article outlines the features of re3data.org, and shows how this registry helps to identify appropriate repositories for storage and search of research data.

Exploring Characterizations of Learning Object Repositories Using Data Mining Techniques

Science.gov (United States)

Segura, Alejandra; Vidal, Christian; Menendez, Victor; Zapata, Alfredo; Prieto, Manuel

Learning object repositories provide a platform for the sharing of Web-based educational resources. As these repositories evolve independently, it is difficult for users to have a clear picture of the kind of contents they give access to. Metadata can be used to automatically extract a characterization of these resources by using machine learning techniques. This paper presents an exploratory study carried out in the contents of four public repositories that uses clustering and association rule mining algorithms to extract characterizations of repository contents. The results of the analysis include potential relationships between different attributes of learning objects that may be useful to gain an understanding of the kind of resources available and eventually develop search mechanisms that consider repository descriptions as a criteria in federated search.

Studies on an advanced repository system with enhanced engineered barriers (a framework)

International Nuclear Information System (INIS)

Fujiwara, A.; Tashiro, S.; Ikari, S.; Suzuki, A.

1993-01-01

In order to propose advanced designs of repositories with enhanced engineered barriers of relatively high radioactive wastes such as burnable poisons, channel boxes, control rods and highly irradiated metals, studies started in 1987 and completed the first phase in 1992. This paper presents the framework and brief results of the first phase. The studies set preliminary design concepts of the repositories with various combinations with engineered barriers and natural barriers for different models and locations such as a silo type in shallow land or a tunnel type in intermediate depth. Through the designs, four component technics were picked up and studied for (1) construction of the components in repository; (2) performance evaluation to realize repository design; (3) improvement of circumstances inside or around repository; and (4) surveillance of repository performance to realize the repository designs. Finally, some repository systems were provided using obtained results, and then the applicability and the economy were evaluated. The studies will continue to the second phase focusing on the long-term performance of the repositories

Technical feasibility of retrieval within the UK repository concept for ILW/LLW

International Nuclear Information System (INIS)

McCall, A.; McKirdy, B.

2000-01-01

Nirex is developing a staged, reversible concept for the disposal of ILW and certain LLW in the UK. Within that concept, the retrievability strategy includes the option of keeping open the repository, for an extended period, after all waste has been emplaced. In examining the feasibility of such an approach, a number of key technical issues have been identified and options for addressing these issues have been established. This paper will describe the issues identified and the development of practical solutions for incorporating retrievability within the Nirex concept. (author)

Analyses of hypothetical FCI's in a fast reactor

International Nuclear Information System (INIS)

Padilla, A. Jr.; Martin, F.J.; Niccoli, L.G.

1981-01-01

Parametric analyses using the SIMMER code were performed to evaluate the potential for a severe recriticality from a pressure-driven recompaction caused by an energetic FCI during the transition phase of a hypothetical accident in a fast reactor. For realistic and reasonable estimates for the assumed accident conditions, a severe recriticality was not predicted. The conditions under which a severe recriticality would be obtained or averted were identified. 10 figures, 2 tables

Visual querying and analysis of large software repositories

NARCIS (Netherlands)

Voinea, Lucian; Telea, Alexandru

We present a software framework for mining software repositories. Our extensible framework enables the integration of data extraction from repositories with data analysis and interactive visualization. We demonstrate the applicability of the framework by presenting several case studies performed on

Dissolution kinetics of smectite in geological repository system of TRU waste

International Nuclear Information System (INIS)

Sato, Tsutomu

2005-02-01

Extensive use of cement for encapsulation, mine timbering, and grouting purposes is envisaged in geological repositories of TRU waste. Degradation of cement materials in the repositories can produce a high pH pore fluid initially ranging from pH 13.0 to 13.5. The high pH pore fluids can migrate and react chemically with the host rock and bentonites which were employed to enhance repository's integrity. These chemical reactions can effect the capacity of the rocks and bentonites in retarding the migration of radionuclides. Smectite, main component of bentonite, can lose some of their desirable properties at the early stages of bentonite-cement fluid interaction. This has been a key research issue in performance assessment of TRU waste disposal. In this study, firstly, the factors affected on dissolution rate of smectite and equations describing dissolution rate were reviewed. Secondly, the effect of dissolved silica on the dissolution behavior of Na-montmorillonite was investigated. Bulk sample flow-through dissolution experiments at alkaline condition (pH 13.3) with different dissolved silica concentrations at different temperatures were performed. Titration experiments were also carried out at similar conditions. Atomic Force Microscopy (AFM) ex situ observations (i.e. on samples from flow-through experiments) was also performed to obtain the dissolution rate. Current results from bulk sample surface titration experiments indicate that dissolved silica has no pronounced effect on the surface titration behavior of Na-montmorillonite at any temperature. However, the trends for the surface titration behavior represent the averaged behavior of all particle sizes (i.e. including colloids) such that within an order of magnitude change cannot be quantified appreciably. Bulk flow-through dissolution experiments coupled with ex situ AFM observations indicate that there is also no effect of dissolved silica with comparatively low concentration of the reacting solution on

Institutional Repositories in Indian Universities and Research Institutes: A Study

Science.gov (United States)

Krishnamurthy, M.; Kemparaju, T. D.

2011-01-01

Purpose: The purpose of this paper is to report on a study of the institutional repositories (IRs) in use in Indian universities and research institutes. Design/methodology/approach: Repositories in various institutions in India were accessed and described in a standardised way. Findings: The 20 repositories studied covered collections of diverse…

The Use of Digital Repositories for Enhancing Teacher Pedagogical Performance

Science.gov (United States)

Cohen, Anat; Kalimi, Sharon; Nachmias, Rafi

2013-01-01

This research examines the usage of local learning material repositories at school, as well as related teachers' attitudes and training. The study investigates the use of these repositories for enhancing teacher performance and assesses whether the assimilation of the local repositories increases their usage of and contribution to by teachers. One…

Oceanographic Data Repositories: An Analysis of the International Situation

Directory of Open Access Journals (Sweden)

Fabiano Couto Corrêa da Silva

2017-04-01

Full Text Available The preservation and organization of oceanographic research data enables the scientific community to consult and reuse information of different kinds, and this is made possible by the repositories, meaning the services that facilitate data storage and dissemination. This paper reviews the current situation of oceanographic data repositories across different countries and evaluates them according to a series of indicators. The writers propose that although interest in storing and reusing oceanographic data has increased in recent years, the repositories are still in the process of developing their systems for processing, disseminating and reusing data. The repositories also differ in terms of architecture and the organizational level of the content they offer.

Risk management in the project of implantation of the repository for low and intermediate level radioactive waste

International Nuclear Information System (INIS)

Borssatto, Maria de Fatima B.; Tello, Cledola Cassia O. de; Uemura, George

2011-01-01

Project RBMN is part of the Brazilian solution for the storage of radioactive waste generated by the activities of nuclear energy in Brazil. The aim of RBMN is to implement the National Repository to dispose the low and intermediate-level radioactive waste. Risk is a characteristic of all projects, and it is originated from uncertainties, assumptions and the environment of execution of the project. Risk management is the way to monitor systematically these uncertainties and a guaranty that the goals of the project will be attained. A specific methodology for the risk management of the Project RBMN is under development, which integrates models and processes for identification and analysis of risks, reactions, monitoring, control and planning of risk management. This methodology is fundamental and will be of primordial importance for future generations who will be responsible for the operation at final stages, closure and institutional control during the post-closure of the repository. It will provide greater safety to executed processes and safeguarding risks and specific solutions for this enterprise, guaranteeing the safety of the repository in its life cycle, which has a foreseen duration of at least three hundred years. The aim of this paper is to present the preliminary analysis of the opportunities, threats, strong points and weak points identified up to now, that will provide support to implement risk management procedures. The methodology will be based on the PMBOK R - Project Management Board of Knowledge - and will take into consideration the best practices for project management.(author)

Microbial Influence on the Performance of Subsurface, Salt-Based Radioactive Waste Repositories. An Evaluation Based on Microbial Ecology, Bioenergetics and Projected Repository Conditions

International Nuclear Information System (INIS)

Swanson, J.S.; Reed, D.T.; Cherkouk, A.; Arnold, T.; Meleshyn, A.; Patterson, Russ

2018-01-01

For the past several decades, the Nuclear Energy Agency Salt Club has been supporting and overseeing the characterisation of rock salt as a potential host rock for deep geological repositories. This extensive evaluation of deep geological settings is aimed at determining - through a multidisciplinary approach - whether specific sites are suitable for radioactive waste disposal. Studying the microbiology of granite, basalt, tuff, and clay formations in both Europe and the United States has been an important part of this investigation, and much has been learnt about the potential influence of microorganisms on repository performance, as well as about deep subsurface microbiology in general. Some uncertainty remains, however, around the effects of microorganisms on salt-based repository performance. Using available information on the microbial ecology of hyper-saline environments, the bioenergetics of survival under high ionic strength conditions and studies related to repository microbiology, this report summarises the potential role of microorganisms in salt-based radioactive waste repositories

Effects of repository conditions on environmental impact reduction by recycling

International Nuclear Information System (INIS)

Ahn, Joonhong

2010-01-01

The environmental impacts (EI) of high-level wastes (HLW) disposed of in a water-saturated repository (WSR) and in the Yucca Mountain Repository (YMR) for various fuel cycle cases have been evaluated and compared to observe the difference in the recycling effects for differing repository conditions. With the impacts of direct spent fuel disposal in each repository as the reference level, separation of actinides by Urex+ and borosilicate vitrification clearly reduces the environmental impacts of YMR, while separation by Purex and borosilicate vitrification would not necessarily reduce the environmental impact of WSR. (authors)

Representation of two-phase flow in the vicinity of the repository in the 1996 performance assessment for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

VAUGHN, PALMER; BEAN, J.E.; HELTON, JON CRAIG; LORD, MICHAEL E.; MACKINNON, ROBERT J.; SCHREIBER, JAMES D.

2000-01-01

The following topics related to the representation of two-phase (gas and brine) flow in the vicinity of the repository in the 1996 performance assessment (PA) for the Waste Isolation Pilot Plant (WIPP) are discussed: (1) system of nonlinear partial differential equations used to model two-phase flow, (2) incorporation of repository shafts into model (3) creep closure of repository. (4) interbed fracturing, (5) gas generation (6) capillary action in waste, (7) borebole model (8) numerical solution and (9) gas and brine flow across specified boundaries. Two-phase flow calculations are a central part of the 1996 WIPP PA and supply results that are subsequently used in the calculation of releases to the surface at the time of a drilling intrusion (i.e., spallings, direct brine releases) and long-term releases due to radionuclide transport by flowing groundwater

Czech Republic. Dukovany repository

International Nuclear Information System (INIS)

2001-01-01

Full text: The repository at the Dukovany site is a structure located above the land surface. It consists of two double-rows of reinforced concrete vaults. Each double-row has dimensions 38x160x6 meters and contains 2x28 vaults. The internal dimensions of each vault are 18x6x5.4 meters. The repository serves for reactor wastes from the Dukovany and Temelin nuclear power plants (NPPs). Its capacity is 55,000 m 3 or 130,000 drums. The repository is a fully engineered facility with multiple barriers. The first engineered barrier is the waste form (in the case of waste from the Dukovany NPP, the waste form is mainly bitumen, but concrete and glass are also considered as suitable solidification products). The second barrier is the container (a 200 litre steel drum or a HIC container), whereas the third consists of cut-off reinforced concrete walls with asphalt-based hydro-insulation. The fourth barrier is a cap which should protect the vaults against infiltration of rainwater and should serve also as an intrusion and erosion barrier. The fifth barrier is a drainage system around the repository which is composed of layers of gravel and sand. The void space in drums around the waste is filled with specially composed grout. Such waste packages are emplaced into the disposal vault, which is covered by pre-fabricated panels. Thereafter, joints between the panels are sealed and a provisional coverage added; the final cover, however, will be constructed only over the whole row of 28 vaults, until all vaults are filled with waste. The final cover will encompass the following components: reinforced concrete pre-fabricated panels (500 mm); cement overcoat (30 mm); insulation foil; concrete layer for cap levelling (5-150 mm); layer of asphalto-propylene concrete (150 mm); soil (450 mm); geotextile foil with topsoil (top surface vegetation). (author)

Monitored retrievable storage (MRS) facility and salt repository integration: Engineering study report

International Nuclear Information System (INIS)

1987-07-01

This MRS Facility and Salt Repository Integration Study evaluates the impacts of an integrated MRS/Salt Repository Waste Management System on the Salt Repository Surface facilities' design, operations, cost, and schedule. Eight separate cases were studied ranging from a two phase repository design with no MRS facility to a design in which the repository only received package waste from the MRS facility for emplacement. The addition of the MRS facility to the Waste Management System significantly reduced the capital cost of the salt repository. All but one of the cases studied were capable of meeting the waste acceptance data. The reduction in the size and complexity of the Salt Repository waste handling building with the integration of the MRS facility reduces the design and operating staff requirements. 7 refs., 35 figs., 43 tabs

A Routing Mechanism for Cloud Outsourcing of Medical Imaging Repositories.

Science.gov (United States)

Godinho, Tiago Marques; Viana-Ferreira, Carlos; Bastião Silva, Luís A; Costa, Carlos

2016-01-01

Web-based technologies have been increasingly used in picture archive and communication systems (PACS), in services related to storage, distribution, and visualization of medical images. Nowadays, many healthcare institutions are outsourcing their repositories to the cloud. However, managing communications between multiple geo-distributed locations is still challenging due to the complexity of dealing with huge volumes of data and bandwidth requirements. Moreover, standard methodologies still do not take full advantage of outsourced archives, namely because their integration with other in-house solutions is troublesome. In order to improve the performance of distributed medical imaging networks, a smart routing mechanism was developed. This includes an innovative cache system based on splitting and dynamic management of digital imaging and communications in medicine objects. The proposed solution was successfully deployed in a regional PACS archive. The results obtained proved that it is better than conventional approaches, as it reduces remote access latency and also the required cache storage space.

Hydrological and hydrogeological effects of an open repository in Forsmark. Final MIKE SHE flow modelling results for the Environmental Impact Assessment

International Nuclear Information System (INIS)

Maartensson, Erik; Gustafsson, Lars-Goeran

2010-07-01

conditions show that the magnitude and the geographical extent of the groundwater-table drawdown are smaller than the hydraulic-head drawdown in the bedrock. The influence area for the groundwater-table drawdown primarily coincides with locations where the Quaternary deposits are in contact with bedrock containing fracture zones with high vertical hydraulic conductivity. The groundwater inflow to the repository, the groundwater-table drawdown and the drawdown of hydraulic heads in the bedrock were analysed for different values of the hydraulic conductivity of the grouted zone (K grout ) and also for layouts that aim to represent different repository-development phases. For a hypothetical case with a fully open repository, the model-calculated inflow is in the interval 15-47 L/s depending on the value of K grout . Using meteorological data and sea-level data for the year 2006, the associated influence area for the groundwater-table drawdown (annual average drawdown exceeding 0.3 m) has a size of 1.4 km 2 for K grout = 10 -7 m/s and less than half for K grout = 10 -9 m/s. According to the modelling results, the groundwater inflow to the repository has very small effects on water levels in lakes and discharges in streams. However, for K grout = 10 -7 m/s the annually accumulated discharge in the stream upstream from Lake Bolundsfjaerden is reduced by 13%, which is due to drawdown of the groundwater table within the catchment area of the stream. Sensitivity analyses show that the groundwater inflow to the repository and the size of the groundwater table influence area are not very sensitive to the tested variants concerning the hydrogeological properties of the upper 200 m of the bedrock and the boundary conditions (including the sea level). The model-calculated influence area demonstrates some sensitivity to the choice of methodology for modelling water flow in the unsaturated zone. Moreover, the influence area is larger if the hydrogeological properties in the upper 20 m of

Hydrological and hydrogeological effects of an open repository in Forsmark. Final MIKE SHE flow modelling results for the Environmental Impact Assessment

Energy Technology Data Exchange (ETDEWEB)

Maartensson, Erik; Gustafsson, Lars-Goeran (DHI Sverige AB (Sweden))

2010-07-15

conditions show that the magnitude and the geographical extent of the groundwater-table drawdown are smaller than the hydraulic-head drawdown in the bedrock. The influence area for the groundwater-table drawdown primarily coincides with locations where the Quaternary deposits are in contact with bedrock containing fracture zones with high vertical hydraulic conductivity. The groundwater inflow to the repository, the groundwater-table drawdown and the drawdown of hydraulic heads in the bedrock were analysed for different values of the hydraulic conductivity of the grouted zone (K{sub grout}) and also for layouts that aim to represent different repository-development phases. For a hypothetical case with a fully open repository, the model-calculated inflow is in the interval 15-47 L/s depending on the value of K{sub grout}. Using meteorological data and sea-level data for the year 2006, the associated influence area for the groundwater-table drawdown (annual average drawdown exceeding 0.3 m) has a size of 1.4 km2 for K{sub grout} = 10-7 m/s and less than half for K{sub grout} = 10-9 m/s. According to the modelling results, the groundwater inflow to the repository has very small effects on water levels in lakes and discharges in streams. However, for K{sub grout} = 10-7 m/s the annually accumulated discharge in the stream upstream from Lake Bolundsfjaerden is reduced by 13%, which is due to drawdown of the groundwater table within the catchment area of the stream. Sensitivity analyses show that the groundwater inflow to the repository and the size of the groundwater table influence area are not very sensitive to the tested variants concerning the hydrogeological properties of the upper 200 m of the bedrock and the boundary conditions (including the sea level). The model-calculated influence area demonstrates some sensitivity to the choice of methodology for modelling water flow in the unsaturated zone. Moreover, the influence area is larger if the hydrogeological properties in

Monte Carlo simulations for generic granite repository studies

Energy Technology Data Exchange (ETDEWEB)

Chu, Shaoping [Los Alamos National Laboratory; Lee, Joon H [SNL; Wang, Yifeng [SNL

2010-12-08

In a collaborative study between Los Alamos National Laboratory (LANL) and Sandia National Laboratories (SNL) for the DOE-NE Office of Fuel Cycle Technologies Used Fuel Disposition (UFD) Campaign project, we have conducted preliminary system-level analyses to support the development of a long-term strategy for geologic disposal of high-level radioactive waste. A general modeling framework consisting of a near- and a far-field submodel for a granite GDSE was developed. A representative far-field transport model for a generic granite repository was merged with an integrated systems (GoldSim) near-field model. Integrated Monte Carlo model runs with the combined near- and farfield transport models were performed, and the parameter sensitivities were evaluated for the combined system. In addition, a sub-set of radionuclides that are potentially important to repository performance were identified and evaluated for a series of model runs. The analyses were conducted with different waste inventory scenarios. Analyses were also conducted for different repository radionuelide release scenarios. While the results to date are for a generic granite repository, the work establishes the method to be used in the future to provide guidance on the development of strategy for long-term disposal of high-level radioactive waste in a granite repository.

US Department of Energy Approach to Probabilistic Evaluation of Long-Term Safety for a Potential Yucca Mountain Repository

International Nuclear Information System (INIS)

Dr. R. Dyer; Dr. R. Andrews; Dr. A. Van Luik

2005-01-01

Regulatory requirements being addressed in the US geological repository program for spent nuclear fuel and high-level waste disposal specify probabilistically defined mean-value dose limits. These dose limits reflect acceptable levels of risk. The probabilistic approach mandated by regulation calculates a ''risk of a dose,'' a risk of a potential given dose value at a specific time in the future to a hypothetical person. The mean value of the time-dependent performance measure needs to remain below an acceptable level defined by regulation. Because there are uncertain parameters that are important to system performance, the regulation mandates an analysis focused on the mean value of the performance measure, but that also explores the ''full range of defensible and reasonable parameter distributions''...System performance evaluations should not be unduly influenced by...''extreme physical situations and parameter values''. Challenges in this approach lie in defending the scientific basis for the models selected, and the data and distributions sampled. A significant challenge lies in showing that uncertainties are properly identified and evaluated. A single-value parameter has no uncertainty, and where used such values need to be supported by scientific information showing the selected value is appropriate. Uncertainties are inherent in data, but are also introduced by creating parameter distributions from data sets, selecting models from among alternative models, abstracting models for use in probabilistic analysis, and in selecting the range of initiating event probabilities for unlikely events. The goal of the assessment currently in progress is to evaluate the level of risk inherent in moving ahead to the next phase of repository development: construction. During the construction phase, more will be learned to inform a new long-term risk evaluation to support moving to the next phase: accepting waste. Therefore, though there was sufficient confidence of safety

Monitoring of geological repositories for high level radioactive waste

International Nuclear Information System (INIS)

2001-04-01

Geological repositories for disposal of high level radioactive waste are designed to provide isolation of the waste from human environment for many thousands of years. This report discusses the possible purposes for monitoring geological repositories at the different stages of a repository programme, the use that may be made of the information obtained and the techniques that might be applied. This report focuses on the different objectives that monitoring might have at various stages of a programme, from the initiation of work on a candidate site, to the period after repository closure. Each objective may require somewhat different types of information, or may use the same information in different ways. Having evaluated monitoring requirements, the report concludes with a brief evaluation of available monitoring techniques

Integrating repositories with fuel cycles: The airport authority model

Energy Technology Data Exchange (ETDEWEB)

Forsberg, C. [Massachusetts Inst. of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139-4307 (United States)

2012-07-01

The organization of the fuel cycle is a legacy of World War II and the cold war. Fuel cycle facilities were developed and deployed without consideration of the waste management implications. This led to the fuel cycle model of a geological repository site with a single owner, a single function (disposal), and no other facilities on site. Recent studies indicate large economic, safety, repository performance, nonproliferation, and institutional incentives to collocate and integrate all back-end facilities. Site functions could include geological disposal of spent nuclear fuel (SNF) with the option for future retrievability, disposal of other wastes, reprocessing with fuel fabrication, radioisotope production, other facilities that generate significant radioactive wastes, SNF inspection (navy and commercial), and related services such as SNF safeguards equipment testing and training. This implies a site with multiple facilities with different owners sharing some facilities and using common facilities - the repository and SNF receiving. This requires a different repository site institutional structure. We propose development of repository site authorities modeled after airport authorities. Airport authorities manage airports with government-owned runways, collocated or shared public and private airline terminals, commercial and federal military facilities, aircraft maintenance bases, and related operations - all enabled and benefiting the high-value runway asset and access to it via taxi ways. With a repository site authority the high value asset is the repository. The SNF and HLW receiving and storage facilities (equivalent to the airport terminal) serve the repository, any future reprocessing plants, and others with needs for access to SNF and other wastes. Non-public special-built roadways and on-site rail lines (equivalent to taxi ways) connect facilities. Airport authorities are typically chartered by state governments and managed by commissions with members

Integrating repositories with fuel cycles: The airport authority model

International Nuclear Information System (INIS)

Forsberg, C.

2012-01-01

The organization of the fuel cycle is a legacy of World War II and the cold war. Fuel cycle facilities were developed and deployed without consideration of the waste management implications. This led to the fuel cycle model of a geological repository site with a single owner, a single function (disposal), and no other facilities on site. Recent studies indicate large economic, safety, repository performance, nonproliferation, and institutional incentives to collocate and integrate all back-end facilities. Site functions could include geological disposal of spent nuclear fuel (SNF) with the option for future retrievability, disposal of other wastes, reprocessing with fuel fabrication, radioisotope production, other facilities that generate significant radioactive wastes, SNF inspection (navy and commercial), and related services such as SNF safeguards equipment testing and training. This implies a site with multiple facilities with different owners sharing some facilities and using common facilities - the repository and SNF receiving. This requires a different repository site institutional structure. We propose development of repository site authorities modeled after airport authorities. Airport authorities manage airports with government-owned runways, collocated or shared public and private airline terminals, commercial and federal military facilities, aircraft maintenance bases, and related operations - all enabled and benefiting the high-value runway asset and access to it via taxi ways. With a repository site authority the high value asset is the repository. The SNF and HLW receiving and storage facilities (equivalent to the airport terminal) serve the repository, any future reprocessing plants, and others with needs for access to SNF and other wastes. Non-public special-built roadways and on-site rail lines (equivalent to taxi ways) connect facilities. Airport authorities are typically chartered by state governments and managed by commissions with members

Overly Honest Data Repository Development

Directory of Open Access Journals (Sweden)

Colleen Fallaw

2016-10-01

Full Text Available After a year of development, the library at the University of Illinois at Urbana-Champaign has launched a repository, called the Illinois Data Bank (https://databank.illinois.edu/, to provide Illinois researchers with a free, self-serve publishing platform that centralizes, preserves, and provides persistent and reliable access to Illinois research data. This article presents a holistic view of development by discussing our overarching technical, policy, and interface strategies. By openly presenting our design decisions, the rationales behind those decisions, and associated challenges this paper aims to contribute to the library community's work to develop repository services that meet growing data preservation and sharing needs.

Initial design process of the repository

International Nuclear Information System (INIS)

Osmanlioglu, A.E.

2001-01-01

The concept of the final disposal of high level wastes is to isolate the waste from the biosphere for extremely long periods of time by emplacement of wastes into deep stable geological formations. Several geological formations have been considered as candidate host environments for high level waste disposal and several techniques have been developed for repository design. In this study, interrelationships of main parameters of a general repository design have been defined and effective parameters are shown at each step. Initial design process is based on the long term stability of underground openings as disposal galleries. For this reason, this design process includes two main analyses: mechanical analysis and thermal analysis. Each of the analysis systems is directly related to each other by technical precautions. As a result of this design process, general information about the acceptable depth of the repository, layout and emplacement pattern can be taken. Final design study can be established on the result of initial design process. (author)

The deep geologic repository technology programme: toward a geoscience basis for understanding repository safety

International Nuclear Information System (INIS)

Jensen, M.R.

2007-01-01

Within the Deep Geologic Repository Technology Programme (DGRTP) several Geoscience activities are focused on advancing the understanding of groundwater flow system evolution and geochemical stability in a Canadian Shield setting as affected by long-term climate change. A key aspect is developing confidence in predictions of groundwater flow patterns and residence times as they relate to the safety of a deep geologic repository for used nuclear fuel waste. This is being achieved through a coordinated multi-disciplinary approach intent on: i) demonstrating coincidence between independent geo-scientific data; ii) improving the traceability of geo-scientific data and its interpretation within a conceptual descriptive model(s); iii) improving upon methods to assess and demonstrate robustness in flow domain prediction(s) given inherent flow domain uncertainties (i.e. spatial chemical/physical property distributions, boundary conditions) in time and space; and iv) improving awareness amongst geo-scientists as to the utility of various geo-scientific data in supporting a safety case for a deep geologic repository. This multi-disciplinary DGRTP approach is yielding an improved understanding of groundwater flow system evolution and stability in Canadian Shield settings that is further contributing to the geo-scientific basis for understanding and communicating aspects of DGR safety. (author)

Digital Preservation in the Context of Institutional Repositories

Science.gov (United States)

Hockx-Yu, Helen

2006-01-01

Purpose: To discuss the issues and challenges of digital preservation facing institutional repositories and to illustrate the Joint Information Systems Committee's (JISC) view on institutional repositories and its key initiatives in helping UK institutions address these issues. Design/methodology/approach: A combination of published work and JISC…

General construction requirements for the deep repository in the KBS-3 system

International Nuclear Information System (INIS)

2002-10-01

The KBS-3 systems includes equipment and plants for transport of spent nuclear fuels and encapsulated spent fuels, central intermediate storage, encapsulation and deep geologic disposal. The requirements in this document concern the repository and have been put together in view of the tasks of designing, constructing and building the repository. The report presents: A general review of existing design plans; Laws and regulations relevant for the design of the repository; How the regulations have been broken down to functional demands and dimensioning requirements for the repository; How the site conditions influence the design, and how the layout of the different parts of the repository interact; Relations between the functions of the repository, the safety and the design; A foundation for developing construction plans for the repository. The requirements will be collected in a database that will develop as new knowledge is collected

Trial of risk assessment of a hypothetical nuclear facility

International Nuclear Information System (INIS)

Terao, Norichika; Suzuki, Mitsutoshi

2013-01-01

An equation for risk assessment in physical protection is shown by a probability of an adversary attack during a period time, P A , a probability of system effectiveness, P E , and consequence value, C. In addition, P E is shown as the multiplication of a probability of interruption of the facility, P I , by a probability of neutralization by response force, P N . In this study, it is assumed that an adversary assaults a hypothetical nuclear facility. The new quantification method about P A and P I in risk evaluation formula is devised, and risk assessment is attempted. In case of P A , the possibility of assaults against a nuclear facility is discussed by using terrorism data written in the open source database of terrorism, Global Terrorism Database (GTD), summarized by University of Maryland. In addition, it is discussed about P I by using the way of thinking of a risk assessment tool, EASI, developed by the Sandia National Laboratories (SNL). In the hypothetical nuclear facility, the performance of response force, sensors, and communication is expressed quantitatively by probability distribution based on some assumptions. (author)

Global thermo-mechanical effects from a KBS-3 type repository

International Nuclear Information System (INIS)

Hakami, E.; Olofsson, Stig-Olof

1998-01-01

The objective of this study has been to identify the global thermo-mechanical effects in the bedrock hosting a nuclear waste repository. Numerical thermo-mechanical modeling using distinct element models was performed. The number of fracture zones, the heat intensity of the waste, the material properties of the rock mass and the boundary conditions of the models were varied. Different models for multi-level repositories were also analyzed and compared to the main single-level case. Further, the global influence from the excavation of repository tunnels and deposition holes was examined by introducing weaker rock mass material properties in the repository region of one model. The maximum compression stress obtained for the main model is 44 MPa and occurs at the repository level after about 100 years of deposition. Due to thermal expansion, the rock mass displaces upward, and the maximum heave at the ground surface after 1000 years is calculated to be 16 cm. In the area close to the ground surface the horizontal stresses reduce, causing the rock to yield in tension down to a depth of about 80 meters. The fracture zones show opening displacements at shallow depths and closing and shearing at the repository level. The maximum displacements are 0.3-2.5 cm for closing, 0.0-0.8 cm for opening and 0.2-2.2 cm for shearing. The resultant stresses and displacements depend in large part on the assumptions made concerning the heat intensity of the waste. In the main model, an initial heat intensity of 10 W/m 2 is assumed, which gives larger effects than the case with 6 W/m 2 . Another important input parameter for the analysis is the Young's modulus of the rock mass. In the main model, a value of 30 GPa is assumed. Higher values of Young's modulus give larger thermo-mechanical effects. All multi-level repository layouts give rise to higher temperatures than the single-level layout, causing the compressive stresses to increase more at the repository level. The multi

Underground excavation methods for a high-level waste repository

International Nuclear Information System (INIS)

Peshel, J.; Gupta, D.; Nataraja, M.

1990-01-01

This paper reports on rock excavation methods for a High-Level Waste repository that should be selected to limit the potential for creating preferential pathways for groundwater to travel to the waste packages or for radionuclides to migrate to the accessible environment. The use of water and other foreign substances should be controlled so that the repository performance is not compromised. The excavated openings should remain stable so that operations can be carried out safely and the retrievability option maintained. As per the current conceptual designs presented by the Department of Energy, the exploratory shaft facility becomes a part of the repository if the Yucca Mountain site is found suitable for repository development. Therefore, the methods of constructing the underground openings should be compatible with the performance requirements for the repository. Also, the degree of damage to the rock surrounding the openings and the extent of the damage zone should not preclude adequate site characterization. The ESf construction and operation should be compatible with the site data gathering activities, such as geological, thermomechanical, hydrological and geochemical testing

Reference design description for a geologic repository. Revision 02

International Nuclear Information System (INIS)

1999-01-01

This Reference Design Description explains the current design for a potential geologic repository that may be located at Yucca Mountain in Nevada. It describes the proposed design for a surface facility, subsurface repository, and waste packaging; it also presents the current design of the key engineering systems for the final four phases: operations, monitoring, closure, and postclosure. In addition, this Reference Design Description reviews the expected long-term performance of the potential repository. In accordance with current law, this design does not include an interim storage option. This document has six major sections. Section 1 describes the physical layout of the proposed repository. The second section describes the 4-phase evolution of the development of the proposed repository. Section 3 describes the reception of waste from offsite locations. The fourth section details the various systems that will package the waste and move it below ground as well as safety monitoring and closure. Section 5 describes the systems (both physical and analytical) that ensure continued safety after closure. The final section offers design options that may be adopted to increase the margin of safety

Environmental effects on corrosion in the Tuff repository

International Nuclear Information System (INIS)

Beavers, J.A.; Thompson, N.G.

1990-02-01

Cortest Columbus is investigating the long-term performance of container materials used for high-level waste packages as part of the information needed by the Nuclear Regulatory Commission to assess the Department of Energy's application to construct a geologic repository for high-level radioactive waste. The scope of work consists of employing short-term techniques, to examine a wide range of possible failure modes. Long-term tests are being used to verify and further examine specific failure modes identified as important by the short-term studies. The original focus of the program was on the salt repository but the emphasis was shifted to the Tuff repository. This report summarizes the results of a literature survey performed under Task 1 of the program. The survey focuses on the influence of environmental variables on the corrosion behavior of candidate container materials for the Tuff repository. Environmental variables considered include: radiation, thermal and microbial effects. 80 refs., 44 figs., 44 tabs

Future extension of the Swedish repository for low and intermediate level waste (SFR)

International Nuclear Information System (INIS)

Carlsson, Jan

2006-01-01

The existing Swedish repository for low and intermediate level waste (SFR) is licensed for disposal of short-lived waste originated from operation and maintenance of Swedish nuclear power plants. The repository is foreseen to be extended to accommodate short-lived waste from the future decommissioning of the Nuclear Power Plants. Long-lived waste from operation, maintenance and eventually decommissioning will be stored some years before disposal in a geological repository. This repository can be build either as a further extension of the SFR facility or as a separate repository. This paper discusses the strategy of a step-wise extended repository where the extensions are performed during operation of the existing parts of the repository. It describes the process for licensing new parts of the repository (and re-license of the existing parts). (author)

What we say and what we do: the relationship between real and hypothetical moral choices.

Science.gov (United States)

FeldmanHall, Oriel; Mobbs, Dean; Evans, Davy; Hiscox, Lucy; Navrady, Lauren; Dalgleish, Tim

2012-06-01

Moral ideals are strongly ingrained within society and individuals alike, but actual moral choices are profoundly influenced by tangible rewards and consequences. Across two studies we show that real moral decisions can dramatically contradict moral choices made in hypothetical scenarios (Study 1). However, by systematically enhancing the contextual information available to subjects when addressing a hypothetical moral problem-thereby reducing the opportunity for mental simulation-we were able to incrementally bring subjects' responses in line with their moral behaviour in real situations (Study 2). These results imply that previous work relying mainly on decontextualized hypothetical scenarios may not accurately reflect moral decisions in everyday life. The findings also shed light on contextual factors that can alter how moral decisions are made, such as the salience of a personal gain. Copyright © 2012 Elsevier B.V. All rights reserved.

Landscape modeling for dose calculations in the safety assessment of a repository for spent nuclear fuel

International Nuclear Information System (INIS)

Lindborg, Tobias; Kautsky, Ulrik; Brydsten, Lars

2007-01-01

The Swedish Nuclear Fuel and Waste Management Co.,(SKB), pursues site investigations for the final repository for spent nuclear fuel at two sites in the south eastern part of Sweden, the Forsmark- and the Laxemar site. Data from the two site investigations are used to build site descriptive models of the areas. These models describe the bedrock and surface system properties important for designing the repository, the environmental impact assessment, and the long-term safety, i.e. up to 100,000 years, in a safety assessment. In this paper we discuss the methodology, and the interim results for, the landscape model, used in the safety assessment to populate the Forsmark site in the numerical dose models. The landscape model is built upon ecosystem types, e.g. a lake or a mire, (Biosphere Objects) that are connected in the landscape via surface hydrology. Each of the objects have a unique set of properties derived from the site description. The objects are identified by flow transport modeling, giving discharge points at the surface for all possible flow paths from the hypothetical repository in the bedrock. The landscape development is followed through time by using long-term processes e.g. shoreline displacement and sedimentation. The final landscape model consists of a number of maps for each chosen time period and a table of properties that describe the individual objects which constitutes the landscape. The results show a landscape that change over time during 20,000 years. The time period used in the model equals the present interglacial and can be used as an analogue for a future interglacial. Historically, the model area was covered by sea, and then gradually changes into a coastal area and, in the future, into a terrestrial inland landscape. Different ecosystem types are present during the landscape development, e.g. sea, lakes, agricultural areas, forest and wetlands (mire). The biosphere objects may switch from one ecosystem type to another during the

Study of nuclear waste storage capacity at Yucca mountain repository

International Nuclear Information System (INIS)

Zhou Wei; Apted, M.; Kessler, J.H.

2008-01-01

The Yucca Mountain repository is applying license for storing 70000 MTHM nuclear waste including commercial spent nuclear fuel (CSNF) and defense high-level radioactive waste (HLW). The 70000 MTHM is a legal not the technical limit. To study the technical limit, the Electric Power Research Institute (EPRI) carried out a systematic study to explore the potential impact if the repository will accept more waste. This paper describes the model and results for evaluating the spent-fuel disposal capacity for a repository at Yucca Mountain from the thermal and hydrological point of view. Two proposed alternative repository designs are analyzed, both of which would fit into the currently well-characterized site and, therefore, not necessitating any additional site characterization at Yucca Mountain. The two- and three-dimensional models for coupled thermo-hydrological analysis extends from the surface to the water table, covering all the major and subgroup rock layers of the planned repository, as well as formations above and below the repository horizon. A dual-porosity and dual-permeability approach is used to model coupled heat and mass transfer through fracture formations. The waste package heating and ventilation are all assumed to follow those of the current design. The results show that the repository is able to accommodate three times the amount of spent fuel compared to the current design, without extra spatial expansion or exceeding current thermal and hydrological constraints. (authors)

Stochastic and deterministic models to evaluate the critical distance of a near surface repository for the disposal of intermediate and low level radioactive wastes

Energy Technology Data Exchange (ETDEWEB)

Alves, A.S.M., E-mail: asergi@eletronuclear.gov.br [Eletrobrás Termonuclear – Eletronuclear S.A. , Rua da Candelária 65, 7° andar, GSN.T, 20091-906 Rio de Janeiro, RJ (Brazil); Melo, P.F. Frutuoso e, E-mail: frutuoso@nuclear.ufrj.br [Graduate Program of Nuclear Engineering, COPPE, Federal University of Rio de Janeiro, Av. Horácio Macedo 2030, Bloco G, sala 206, 21941-914 Rio de Janeiro, RJ (Brazil); Passos, E.M., E-mail: epassos@eletronuclear.gov.br [Eletrobrás Termonuclear – Eletronuclear S.A. , Rua da Candelária 65, 7° andar, GSN.T, 20091-906 Rio de Janeiro, RJ (Brazil); Fontes, G.S., E-mail: gsfontes@hotmail.com [Instituto Militar de Engenharia – IME, Praça General Tibúrcio 80, 22290-270 Rio de Janeiro, RJ (Brazil)

2015-06-15

Highlights: • The water infiltration scenario is evaluated for a near surface repository. • The main objective is the determination of the critical distance of the repository. • The column liquid height in the repository is governed by an Ito stochastic equation. • Practical results are obtained for the Abadia de Goiás repository in Brazil. - Abstract: The aim of this paper is to present the stochastic and deterministic models developed for the evaluation of the critical distance of a near surface repository for the disposal of intermediate (ILW) and low level (LLW) radioactive wastes. The critical distance of a repository is defined as the distance between the repository and a well in which the water activity concentration is able to cause a radiological dose to a member of the public equal to the dose limit set by the regulatory body. The mathematical models are developed based on the Richards equation for the liquid flow in the porous media and on the solute transport equation in this medium. The release of radioactive material from the repository to the environment is considered through its base and its flow is determined by Darcy's Law. The deterministic model is obtained from the stochastic approach by neglecting the influence of the Gaussian white noise on the rainfall and the equations are solved analytically with the help of conventional calculus (non-stochastic calculus). The equations of the stochastic model are solved analytically based on the Ito stochastic calculus and numerically by using the Euler–Maruyama method. The impact on the value of the critical distance of the Abadia de Goiás repository is analyzed, taken as a study case, when the deterministic methodology is replaced by the stochastic one, considered more appropriate for modeling rainfall as a stochastic process.

Practices of research data curation in institutional repositories: A qualitative view from repository staff.

Science.gov (United States)

Lee, Dong Joon; Stvilia, Besiki

2017-01-01

The importance of managing research data has been emphasized by the government, funding agencies, and scholarly communities. Increased access to research data increases the impact and efficiency of scientific activities and funding. Thus, many research institutions have established or plan to establish research data curation services as part of their Institutional Repositories (IRs). However, in order to design effective research data curation services in IRs, and to build active research data providers and user communities around those IRs, it is essential to study current data curation practices and provide rich descriptions of the sociotechnical factors and relationships shaping those practices. Based on 13 interviews with 15 IR staff members from 13 large research universities in the United States, this paper provides a rich, qualitative description of research data curation and use practices in IRs. In particular, the paper identifies data curation and use activities in IRs, as well as their structures, roles played, skills needed, contradictions and problems present, solutions sought, and workarounds applied. The paper can inform the development of best practice guides, infrastructure and service templates, as well as education in research data curation in Library and Information Science (LIS) schools.

Radioactive repository in Brazil - useful tools in suitable site selection; Repositorios radioativos no Brasil - ferramentas utilizadas na escolha de sitios adequados

Energy Technology Data Exchange (ETDEWEB)

Prates, Sonia P.; Javier Rios, Francisco; Alves, James V.; Fuzikawa, Kazuo [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, MG (Brazil)]. E-mail: pratess@cdtn.br

2005-07-01

Geological studies represent a useful tool in the selection of suitable areas for nuclear waste repository constructions. A detailed geological study can be obtained by structural - geological mapping, including tectonics studies; hydrogeological studies; petrological and geochemical studies of host rocks and geochemical studies of fluids in minerals. The study of the composition and behavior of fluids in minerals is based upon the study of solutions sometimes present inside the minerals, known as fluid inclusions. These solutions were imprisoned when minerals were formed and may represent the original conditions under which the minerals were formed. The working methodology allows to obtain these fluids presence and composition and to check their microfracturing and leaking probabilities. The LIFM ( Metallogenesis and Fluid Inclusions Laboratory) at CDTN is enable do develop some of these studies, mainly petrological and geochemical studies of host rocks and also geochemical studies of fluids in minerals. Some aspects of rocks used for nuclear waste repository constructions are discussed. (author)

Interoperability Across the Stewardship Spectrum in the DataONE Repository Federation

Science.gov (United States)

Jones, M. B.; Vieglais, D.; Wilson, B. E.

2016-12-01

Thousands of earth and environmental science repositories serve many researchers and communities, each with their own community and legal mandates, sustainability models, and historical infrastructure. These repositories span the stewardship spectrum from highly curated collections that employ large numbers of staff members to review and improve data, to small, minimal budget repositories that accept data caveat emptor and where all responsibility for quality lies with the submitter. Each repository fills a niche, providing services that meet the stewardship tradeoffs of one or more communities. We have reviewed these stewardship tradeoffs for several DataONE member repositories ranging from minimally (KNB) to highly curated (Arctic Data Center), as well as general purpose (Dryad) to highly discipline or project specific (NEON). The rationale behind different levels of stewardship reflect resolution of these tradeoffs. Some repositories aim to encourage extensive uptake by keeping processes simple and minimizing the amount of information collected, but this limits the long-term utility of the data and the search, discovery, and integration systems that are possible. Other repositories require extensive metadata input, review, and assessment, allowing for excellent preservation, discovery, and integration but at the cost of significant time for submitters and expense for curatorial staff. DataONE recognizes these different levels of curation, and attempts to embrace them to create a federation that is useful across the stewardship spectrum. DataONE provides a tiered model for repositories with growing utility of DataONE services at higher tiers of curation. The lowest tier supports read-only access to data and requires little more than title and contact metadata. Repositories can gradually phase in support for higher levels of metadata and services as needed. These tiered capabilities are possible through flexible support for multiple metadata standards and services

Repository emplacement costs for Al-clad high enriched uranium spent fuel

International Nuclear Information System (INIS)