Solution-Focused Brief Therapy: Impacts on Academic and Emotional Difficulties

Science.gov (United States)

Daki, Julia; Savage, Robert S.

2010-01-01

This randomized control trial study evaluated the effectiveness of the solution-focused approach in addressing academic, motivational, and socioemotional needs of 14 children with reading difficulties. The intervention group received five 40-min solution-focused sessions. The control group received academic homework support. Results showed…

Conflicts in Africa: Meaning, Causes, Impact and Solution | Aremu ...

African Journals Online (AJOL)

The continent of Africa has been highly susceptible to intra and inter- state wars and conflicts. This has prompted the insinuation that Africa is the home of wars and instability. Most pathetic about these conflagrations is that they have defied any meaningful solution and their negative impacts have retarded growth and ...

Preliminary Evaluation Of DWPF Impacts Of Boric Acid Use In Cesium Strip FOR SWPF And MCU

International Nuclear Information System (INIS)

Stone, M.

2010-01-01

A new solvent system is being evaluated for use in the Modular Caustic-Side Solvent Extraction Unit (MCU) and in the Salt Waste Processing Facility (SWPF). The new system includes the option to replace the current dilute nitric acid strip solution with boric acid. To support this effort, the impact of using 0.01M, 0.1M, 0.25M and 0.5M boric acid in place of 0.001M nitric acid was evaluated for impacts on the DWPF facility. The evaluation only covered the impacts of boric acid in the strip effluent and does not address the other changes in solvents (i.e., the new extractant, called MaxCalix, or the new suppressor, guanidine). Boric acid additions may lead to increased hydrogen generation during the SRAT and SME cycles as well as change the rheological properties of the feed. The boron in the strip effluent will impact glass composition and could require each SME batch to be trimmed with boric acid to account for any changes in the boron from strip effluent additions. Addition of boron with the strip effluent will require changes in the frit composition and could lead to changes in melt behavior. The severity of the impacts from the boric acid additions is dependent on the amount of boric acid added by the strip effluent. The use of 0.1M or higher concentrations of boric acid in the strip effluent was found to significantly impact DWPF operations while the impact of 0.01M boric acid is expected to be relatively minor. Experimental testing is required to resolve the issues identified during the preliminary evaluation. The issues to be addressed by the testing are: (1) Impact on SRAT acid addition and hydrogen generation; (2) Impact on melter feed rheology; (3) Impact on glass composition control; (4) Impact on frit production; and (5) Impact on melter offgas. A new solvent system is being evaluated for use in the Modular Caustic-Side Solvent Extraction Unit (MCU) and in the Salt Waste Processing Facility (SWPF). The new system includes the option to replace the

Computerized evaluation of flood impact

International Nuclear Information System (INIS)

Gagnon, J.; Quach, T.T.; Marche, C.; Lessard, G.

1998-01-01

A computerized evaluation process for assessing the economic impacts of a potential dam failure is described. The DOMINO software, which was developed by Hydro-Quebec, takes into account flow data from dam break simulations of floods, the territory involved, plus the economic evaluations of the real estate and infrastructures affected. Some examples of software applications and impact evaluations are presented. The principal elements involved in estimating economic or other types of impacts induced by natural flooding or dam failure, are: (1) flow forecasting, (2) defining the contour of the involved territory, and (3) accounting for the various impacts identified in the affected zone. Owing to its wide range of functions and utilities, DOMINO has proven to be a very useful, user-friendly and portable decision-making tool. 5 refs., 6 tabs

Evaluating Realized Impacts of DOE/EERE R&D Programs. Standard impact evaluation method

Energy Technology Data Exchange (ETDEWEB)

Ruegg, Rosalie [TIA Consulting, Inc. (United States); O' Connor, Alan C. [RTI International, Research Triangle Park, NC (United States); Loomis, Ross J. [RTI International, Research Triangle Park, NC (United States)

2014-08-01

This document provides guidance for evaluators who conduct impact assessments of research and development (R&D) programs for the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy (EERE). It is also targeted at EERE program staff responsible for initiating and managing commissioned impact studies. The guide specifies how to estimate economic benefits and costs, energy saved and installed or generated, environmental impacts, energy security impacts, and knowledge impacts of R&D investments in advanced energy technologies.

Evaluating mobile solutions of integrated Community Case ...

African Journals Online (AJOL)

evaluating mobile solutions of iCCM is of mixed quality. (e.g. few explanatory and confirmatory experimental studies, small sample sizes and observation periods, lack of a control). This casts into question the robustness of the evidence. Some shortcomings may be attributed to methodological choices during study design.

Evaluating and regulating the impacts of lobbying in the EU? The case study of green industries

DEFF Research Database (Denmark)

Svendsen, Gert Tinggaard

2011-01-01

farming. Rational choice theory suggests that lobbying and group size advantages can explain the observed difference in achieving environmental target levels. The EU may learn from the US legislation as a starting point for a best‐practice solution and future evaluation of impacts of lobbying in the EU....

An evaluation of solutions to moment method of biochemical oxygen ...

African Journals Online (AJOL)

This paper evaluated selected solutions of moment method in respect to Biochemical Oxygen Demand (BOD) kinetics with the aim of ascertain error free solution. Domestic - institutional wastewaters were collected two - weekly for three months from waste - stabilization ponds in Obafemi Awolowo University, Ile - Ife.

Evaluation of the Appearance of Nail Polish Following Daily Treatment of Ex Vivo Human Fingernails With Topical Solutions of Tavaborole or Efinaconazole.

Science.gov (United States)

Vlahovic, Tracey C; Coronado, Dina; Chanda, Sanjay; Merchant, Tejal; Zane, Lee T

2016-01-01

remaining solution. Tavaborole topical solution, 5% may not alter nail polish appearance; the impact of nail polish on tavaborole clinical efficacy has not been evaluated.

Evaluation of BTEX and phenol removal from aqueous solution by multi-solute adsorption onto smectite organoclay.

Science.gov (United States)

Carvalho, M N; da Motta, M; Benachour, M; Sales, D C S; Abreu, C A M

2012-11-15

The removal process of BTEX and phenol was evaluated. The smectite organoclay for single-solute system reached removal was evaluated by adsorption on smectite organoclay adsorbent by kinetic and equilibrium efficiencies between 55 and 90% while was reached between 30 and 90% for multi-solute system at 297 K and pH 9. The Langmuir-Freundlich model was used to fit the experimental data with correlation coefficient between 0.98 and 0.99 providing kinetic and equilibrium parameter values. Phenol and ethylbenzene presented high maximum adsorbed amount, 8.28 and 6.67 mg/g, respectively, compared to the other compounds for single-solute. Toluene and p-xylene presented high values of adsorption constant which indicates a high adsorption affinity of compounds to organoclay surface and high binding energy of adsorption. Phenol presented low kinetic adsorption constant value indicating slow rate of adsorption. Copyright © 2012 Elsevier B.V. All rights reserved.

Solution Prototype

DEFF Research Database (Denmark)

Efeoglu, Arkin; Møller, Charles; Serie, Michel

2013-01-01

This paper outlines an artifact building and evaluation proposal. Design Science Research (DSR) studies usually consider encapsulated artifact that have relationships with other artifacts. The solution prototype as a composed artifact demands for a more comprehensive consideration in its systematic...... environment. The solution prototype that is composed from blending product and service prototype has particular impacts on the dualism of DSR’s “Build” and “Evaluate”. Since the mix between product and service prototyping can be varied, there is a demand for a more agile and iterative framework. Van de Ven......’s research framework seems to fit this purpose. Van de Ven allows for an iterative research approach to problem solving with flexible starting point. The research activity is the result between the iteration of two dimensions. This framework focuses on the natural evaluation, particularly on ex...

23 CFR 777.7 - Evaluation of impacts.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Evaluation of impacts. 777.7 Section 777.7 Highways... IMPACTS TO WETLANDS AND NATURAL HABITAT § 777.7 Evaluation of impacts. (a) The reasonableness of the... related to: (1) The importance of the impacted wetlands and natural habitats; (2) The extent of highway...

Benchmark Evaluation of Plutonium Nitrate Solution Arrays

International Nuclear Information System (INIS)

Marshall, M.A.; Bess, J.D.

2011-01-01

In October and November of 1981 thirteen approach-to-critical experiments were performed on a remote split table machine (RSTM) in the Critical Mass Laboratory of Pacific Northwest Laboratory (PNL) in Richland, Washington, using planar arrays of polyethylene bottles filled with plutonium (Pu) nitrate solution. Arrays of up to sixteen bottles were used to measure the critical number of bottles and critical array spacing with a tight fitting Plexiglas(reg s ign) reflector on all sides of the arrays except the top. Some experiments used Plexiglas shells fitted around each bottles to determine the effect of moderation on criticality. Each bottle contained approximately 2.4 L of Pu(NO3)4 solution with a Pu content of 105 g Pu/L and a free acid molarity H+ of 5.1. The plutonium was of low 240Pu (2.9 wt.%) content. These experiments were performed to fill a gap in experimental data regarding criticality limits for storing and handling arrays of Pu solution in reprocessing facilities. Of the thirteen approach-to-critical experiments eleven resulted in extrapolations to critical configurations. Four of the approaches were extrapolated to the critical number of bottles; these were not evaluated further due to the large uncertainty associated with the modeling of a fraction of a bottle. The remaining seven approaches were extrapolated to critical array spacing of 3-4 and 4-4 arrays; these seven critical configurations were evaluation for inclusion as acceptable benchmark experiments in the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook. Detailed and simple models of these configurations were created and the associated bias of these simplifications was determined to range from 0.00116 and 0.00162 ± 0.00006 ?keff. Monte Carlo analysis of all models was completed using MCNP5 with ENDF/BVII.0 neutron cross section libraries. A thorough uncertainty analysis of all critical, geometric, and material parameters was performed using parameter

Resource impact evaluation of in-situ uranium groundwater restoration

International Nuclear Information System (INIS)

Charbeneau, R.J.; Rohlich, G.A.

1981-11-01

The purpose of this study was to determine the impact of restoration on the groundwater following in-situ uranium solution mining in South Texas. Restoration is necessary in order to reduce the amounts of undesired chemical constituents left in solution after mining operations have ceased, and thus return the groundwater to a quality consistent with pre-mining use and potential use. Various restoration strategies have been proposed and are discussed. Of interest are the hydrologic, environmental, social, and economic impacts of these restoration alternatives. Much of the discussion concerning groundwater restoration is based on the use of an ammonium carbonate-bicarbonate leach solution in the mining process. This has been the principal leach solution used during the early period of mining in South Texas. Recently, because of apparent difficulties in restoring ammonium to proposed or required levels, many of the companies have changed to the use of other leach solutions. Because little is known about restoration with these other leach solutions they have not been specifically addressed in this report. Likewise, we have not addressed the question of the fate of heavy metals. Following a summary of the development of South Texas in-situ mining in Chapter Two, Chapter Three describes the surface and groundwater resources of the uranium mining district. Chapter Four addresses the economics of water use, and Chapter Five is concerned with regulation of the in-situ uranium industry in Texas. A discussion of groundwater restoration alternatives and impacts is presented in Chapter Six. Chapter Seven contains a summary and a discussion, and conclusions derived from this study. Two case histories are presented in Appendices A and B

The impacts of distributed generators on protections and some solutions

Energy Technology Data Exchange (ETDEWEB)

Ciufo, J.; Cooperberg, A. [Hydro One Networks Inc., Toronto, ON (Canada)

2010-07-01

A significant proportion of the new generation capacity planned for Ontario's Hydro One utility will include distributed generation (DG). The Ontario Power Authority (OPA) has approved the connection of 252 DG facilities. It is expected that the high penetration of DG systems will have an impact on load-connected stations and distribution feeders in the region. This power point presentation discussed potential challenges and solutions for connecting the DG systems to the Hydro One network. An overview of the existing DG system was presented. Potential impacts to the network included an increase in fault current magnitudes, variations in fault currents, and islanding. The installation of DGs may also introduce issues related to automatic reclosing. The use of DG systems may also result in over-voltage and lead to the desensitization of protection equipment. Solutions to the potential problems included the development of a feeder protection system with phase and ground distance elements for instantaneous protection and line protection devices with all relay elements. The multiple setting groups used in the system will be used to facilitate smart grid options in the future. tabs., figs.

An evaluation of mesotherapy solutions for inducing lipolysis and treating cellulite.

Science.gov (United States)

Caruso, Mary K; Roberts, Andrew T; Bissoon, Lionel; Self, K Stan; Guillot, Thomas S; Greenway, Frank L

2008-11-01

The aim of this study was to evaluate the lipolytic potential of solutions used in the practice of cosmetic mesotherapy to stimulate lipolysis, cause local fat reduction and reduce the appearance of cellulite. The mesotherapy solutions were tested in a human fat cell assay using the fold induction of glycerol generation as a measure of lipolysis. The following mesotherapy solutions were tested: aminophylline; yohimbine; isoproterenol; melilotus; aminophylline with melilotus; aminophylline with isoproterenol; aminophylline with isoproterenol and yohimbine; aminophylline with isoproterenol and lidocaine; and aminophylline with isoproterenol, yohimbine and lidocaine. Isoproterenol (Pmesotherapy solutions. Lidocaine is antilipolytic and should be removed from mesotherapy solutions designed for local fat reduction.

Evaluation of automatic vacuum- assisted compaction solutions

Directory of Open Access Journals (Sweden)

M. Brzeziński

2011-01-01

Full Text Available Currently on the mould-making machines market the companies like: DiSA, KUENKEL WAGNER, HAFLINGER, HEINRICH WAGNER SINTO, HUNTER, SAVELLI AND TECHNICAL play significant role. These companies are the manufacturers of various solutions in machines and instalations applied in foundry engineering. Automatic foundry machines for compaction of green sand have the major role in mechanisation and automation processes of making the mould. The concept of operation of automatic machines is based on the static and dynamic methods of compacting the green sand. The method which gains the importance is the compacting method by using the energy of the air pressure. It's the initial stage or the supporting process of compacting the green sand. However in the automatic mould making machines using this method it's essential to use the additional compaction of the mass in order to receive the final parameters of the form. In the constructional solutions of the machines there is the additional division which concerns the method of putting the sand into the mould box. This division distinquishes the transport of the sand with simultaneous compaction or the putting of the sand without the pre-compaction. As the solutions of the major manufacturers are often the subject for application in various foundries, the authors of the paper would like/have the confidence to present their own evaluation process confirmed by their own researches and independent analysis of the producers' solutions.

Exploring the Capability of Evaluating Technical Solutions: A Collaborative Study into the Primary Technology Classroom

Science.gov (United States)

Björkholm, Eva

2014-01-01

Within the field of technology education, evaluating technical solutions is considered as an important topic. Research indicates that pupils have difficulties in evaluating technical solutions in terms of fitness for purpose, i.e. how effective a technical solution supports its intended function. By using the learning study, which is an iterative…

Evaluating the effectiveness of impact assessment instruments

DEFF Research Database (Denmark)

Cashmore, Matthew; Richardson, Tim; Hilding-Ryedvik, Tuija

2010-01-01

to sharpen effectiveness evaluation theory for impact assessment instruments this article critically examines the neglected issue of their political constitution. Analytical examples are used to concretely explore the nature and significance of the politicisation of impact assessment. It is argued......The central role of impact assessment instruments globally in policy integration initiatives has been cemented in recent years. Associated with this trend, but also reflecting political emphasis on greater accountability in certain policy sectors and a renewed focus on economic competitiveness...... that raising awareness about the political character of impact assessment instruments, in itself, is a vital step in advancing effectiveness evaluation theory. Broader theoretical lessons on the framing of evaluation research are also drawn from the political analysis. We conclude that, at least within...

Environmental risk evaluation to minimize impacts within the area affected by the Wenchuan earthquake

International Nuclear Information System (INIS)

Du, Pengfei; Chen, Jining; Chen, Chao; Liu, Yi; Liu, Jianguo; Wang, Hongtao; Zhang, Xiaojian

2012-01-01

Earthquakes can be devastating to built infrastructure and the natural environment, as evidenced by the March 2011, M = 9.0 earthquake, and subsequent tsunami, in Japan. As seen in the Japanese event, environmental damage caused by secondary disasters (tsunami, leakage from a nuclear reactor) can equal or exceed the impacts of the primary event. In order to develop an environmental assessment system to examine secondary disasters, a comprehensive environmental impact evaluation was conducted after the Wenchuan earthquake that occurred on 12 May 2008 in the Sichuan Province, China. This evaluation focused on several key environmental elements such as wastewater, drinking water, soil, solid waste, radiation, and ecosystem-level effects. As part of this assessment, an analysis of root causes and potential solutions was conducted for key issues such as population relocation and resettlement in temporary dwellings, recovery of environmental protection functions, industrial development strategies and production recovery. Methods for post-quake environmental assessment were developed, utilizing GIS-based techniques for spatial evaluation of primary and secondary disaster patterns. The goal of this exercise was the development of effective assessment methods that can be rapidly applied in a post-disaster situation to reduce and mitigate damage caused by secondary disasters, and facilitate the recovery of impaired environmental management structure and function. - Highlights: ► A comprehensive post-quake environmental risk evaluation system was developed. ► The research identifies potential long-term environmental risks in many aspects. ► The research analyzes potential solutions for many typical post-disaster issues. ► Effective assessment methods can be applied in a post-disaster situation to reduce damage caused by secondary disasters.

Environmental risk evaluation to minimize impacts within the area affected by the Wenchuan earthquake

Energy Technology Data Exchange (ETDEWEB)

Du, Pengfei, E-mail: dupf@tsinghua.edu.cn; Chen, Jining, E-mail: jchen1@tsinghua.edu.cn; Chen, Chao, E-mail: chen_water@tsinghua.edu.cn; Liu, Yi, E-mail: yi.liu@tsinghua.edu.cn; Liu, Jianguo, E-mail: jgliu@tsinghua.edu.cn; Wang, Hongtao, E-mail: htwang@tsinghua.edu.cn; Zhang, Xiaojian, E-mail: zhangxj@tsinghua.edu.cn

2012-03-01

Earthquakes can be devastating to built infrastructure and the natural environment, as evidenced by the March 2011, M = 9.0 earthquake, and subsequent tsunami, in Japan. As seen in the Japanese event, environmental damage caused by secondary disasters (tsunami, leakage from a nuclear reactor) can equal or exceed the impacts of the primary event. In order to develop an environmental assessment system to examine secondary disasters, a comprehensive environmental impact evaluation was conducted after the Wenchuan earthquake that occurred on 12 May 2008 in the Sichuan Province, China. This evaluation focused on several key environmental elements such as wastewater, drinking water, soil, solid waste, radiation, and ecosystem-level effects. As part of this assessment, an analysis of root causes and potential solutions was conducted for key issues such as population relocation and resettlement in temporary dwellings, recovery of environmental protection functions, industrial development strategies and production recovery. Methods for post-quake environmental assessment were developed, utilizing GIS-based techniques for spatial evaluation of primary and secondary disaster patterns. The goal of this exercise was the development of effective assessment methods that can be rapidly applied in a post-disaster situation to reduce and mitigate damage caused by secondary disasters, and facilitate the recovery of impaired environmental management structure and function. - Highlights: Black-Right-Pointing-Pointer A comprehensive post-quake environmental risk evaluation system was developed. Black-Right-Pointing-Pointer The research identifies potential long-term environmental risks in many aspects. Black-Right-Pointing-Pointer The research analyzes potential solutions for many typical post-disaster issues. Black-Right-Pointing-Pointer Effective assessment methods can be applied in a post-disaster situation to reduce damage caused by secondary disasters.

Evaluating and measuring impact: where and how?

CERN Multimedia

Antonella Del Rosso

2015-01-01

On 12 and 13 November, a workshop on “Evaluation in international organisations” took place at CERN. Fourteen internal auditors and planning and policy analysts, from six different international organisations, discussed whether and how to evaluate the impact of their organisations’ programmes on the target beneficiaries.      Participants of the “Evaluation in international organisations” workshop at CERN. “Evaluation”, a relatively recent but fast growing discipline, deals with the systematic and objective assessment of the impact of policies and programmes on the target beneficiaries – often society at large. In the past few years, other international organisations have created an evaluation function within their internal structure, whose role is to measure the impact of their public policies. “In the first instance we wanted to understand what the difference between evaluation a...

Problems of evaluating isotope analysis of concentrated salt solutions in potash mines

International Nuclear Information System (INIS)

Schmiedl, H.D.

1980-01-01

Three problems of quantitative evaluation of analytic D and 18 O isotope data of concentrated salt solutions are discussed: (1) Consideration of the influence of admixtures of hydrated salts in determining meteoric or marine water fractions in a concentrated salt solution, (2) analytic accuracy and detection limits in determining meteoric water in salt solutions, and (3) processes of isotopic exchange with reservoir rock and sample matrix

Impact of meander geometry and stream flow events on residence times and solute transport in the intra-meander flow

Science.gov (United States)

Nasir Mahmood, Muhammad; Schmidt, Christian; Trauth, Nico

2017-04-01

Stream morphological features, in combination with hydrological variability play a key role in water and solute exchange across surface and subsurface waters. Meanders are prominent morphological features within stream systems which exhibit unique hydrodynamics. The water surface elevation difference across the inner bank of a meander induces lateral hyporheic exchange within the intra-meander region. This hyporheic flow is characterized by considerably prolonged flow paths and residence times (RT) compared to smaller scales of hyporheic exchange. In this study we examine the impact of different meander geometries on the intra-meander hyporheic flow field and solute mobilization under both steady state and transient flow conditions. We developed a number of artificial meander shape scenarios, representing various meander evolution stages, ranging from a typical initial to advanced stage (near cut off ) meander. Three dimensional steady state numerical groundwater flow simulations including the unsaturated zone were performed for the intra-meander region. The meandering stream was implemented in the model by adjusting the top layers of the modelling domain to the streambed elevation and assigning linearly decreasing head boundary conditions to the streambed cells. Residence times for the intra-meander region were computed by advective particle tracking across the inner bank of meander. Selected steady state cases were extended to transient flow simulations to evaluate the impact of stream discharge events on the temporal behavior of the water exchange and solute transport in the intra-meander region. The transient stream discharge was simulated for a number of discharge events of variable duration and peak height using the surface water model HEC-RAS. Transient hydraulic heads obtained from the surface water model were applied as transient head boundary conditions to the streambed cells of the groundwater model. A solute concentration source was added in the

Impact evaluation of infrastructure interventions

DEFF Research Database (Denmark)

Hansen, Henrik; Andersen, Ole Winckler; White, Howard

2011-01-01

in this volume. Understanding impact means understanding the context in which an intervention takes place and the channels through which the impact on outcomes is expected to occur. Such analysis typically requires mixing both quantitative and qualitative approaches. The analysis will also anticipate......The focus on results in development agencies has led to increased focus on impact evaluation to demonstrate the effectiveness of development programmes. A range of methods are available for counterfactual analysis of infrastructure interventions, as illustrated by the variety of papers...

An evaluation paradigm for cumulative impact analysis

Science.gov (United States)

Stakhiv, Eugene Z.

1988-09-01

Cumulative impact analysis is examined from a conceptual decision-making perspective, focusing on its implicit and explicit purposes as suggested within the policy and procedures for environmental impact analysis of the National Environmental Policy Act of 1969 (NEPA) and its implementing regulations. In this article it is also linked to different evaluation and decision-making conventions, contrasting a regulatory context with a comprehensive planning framework. The specific problems that make the application of cumulative impact analysis a virtually intractable evaluation requirement are discussed in connection with the federal regulation of wetlands uses. The relatively familiar US Army Corps of Engineers' (the Corps) permit program, in conjunction with the Environmental Protection Agency's (EPA) responsibilities in managing its share of the Section 404 regulatory program requirements, is used throughout as the realistic context for highlighting certain pragmatic evaluation aspects of cumulative impact assessment. To understand the purposes of cumulative impact analysis (CIA), a key distinction must be made between the implied comprehensive and multiobjective evaluation purposes of CIA, promoted through the principles and policies contained in NEPA, and the more commonly conducted and limited assessment of cumulative effects (ACE), which focuses largely on the ecological effects of human actions. Based on current evaluation practices within the Corps' and EPA's permit programs, it is shown that the commonly used screening approach to regulating wetlands uses is not compatible with the purposes of CIA, nor is the environmental impact statement (EIS) an appropriate vehicle for evaluating the variety of objectives and trade-offs needed as part of CIA. A heuristic model that incorporates the basic elements of CIA is developed, including the idea of trade-offs among social, economic, and environmental protection goals carried out within the context of environmental

Gallon Model for the evaluation of environmental impacts

International Nuclear Information System (INIS)

Gallon Martinez, Juan Carlos

2003-01-01

When it is necessary to know the impact grade that will have the environment for the introduction of a project or handling plan, it is appealed to a study of environmental impact that quantifies variables of qualitative type to obtain results of quantitative type. The evaluation of environmental impacts is necessary to know which phases or actions of the different projects have negative or positive repercussions or far-reaching about the different susceptible environmental factors to receive impacts, and to determine previously, the most important aspects to determine the level of impact of the projects or handling plans. The evaluation measures the repercussions and consequences of the different activities of the industry on the environment, allowing to evaluate the future conditions of the habitat, being an excellent tool for making decisions regarding the possible future impact that can have an industrial process or project to diminish the nature

Analytical determination of bifurcations of periodic solution in three-degree-of-freedom vibro-impact systems with clearance

International Nuclear Information System (INIS)

Liu, Yongbao; Wang, Qiang; Xu, Huidong

2017-01-01

The smooth bifurcation and non-smooth grazing bifurcation of periodic solution of three-degree-of-freedom vibro-impact systems with clearance are studied in this paper. Firstly, six-dimensional Poincaré maps are established through choosing suitable Poincaré section and solving periodic solutions of vibro-impact system. Then, as the analytic expressions of all eigenvalues of Jacobi matrix of six-dimensional map are unavailable, the numerical calculations to search for the critical bifurcation values point by point is a laborious job based on the classical critical criterion described by the properties of eigenvalues. To overcome the difficulty from the classical bifurcation criteria, the explicit critical criterion without using eigenvalues calculation of high-dimensional map is applied to determine bifurcation points of Co-dimension-one bifurcations and Co-dimension-two bifurcations, and then local dynamical behaviors of these bifurcations are further analyzed. Finally, the existence of the grazing periodic solution of the vibro-impact system and grazing bifurcation point are analyzed, the discontinuous grazing bifurcation behavior is studied based on the compound normal form map near the grazing point, the discontinuous jumping phenomenon and the co-existing multiple solutions near the grazing bifurcation point are revealed.

Evaluating the impact of your library

CERN Document Server

Streatfield, David

2012-01-01

Outlining a rigorously tested approach to library evaluation and offering practical tools and highly relevant examples, this brand new edition enables LIS managers to get to grips with the slippery concept of service impact and to address their own impact questions in their planning.

Peroxidase-mediated polymerization of 1-naphthol: impact of solution pH and ionic strength.

Science.gov (United States)

Bhandari, Alok; Xu, Fangxiang; Koch, David E; Hunter, Robert P

2009-01-01

Peroxidase-mediated oxidation has been proposed as a treatment method for naphthol-contaminated water. However, the impact of solution chemistry on naphthol polymerization and removal has not been documented. This research investigated the impact of pH and ionic strength on peroxidase-mediated removal of 1-naphthol in completely mixed batch reactors. The impact of hydrogen peroxide to 1-naphthol ratio and activity of horseradish peroxidase was also studied. Size exclusion chromatography was used to estimate the molecular weight distribution of oligomeric products, and liquid chromatography/mass spectrometry was used to estimate product structure. Naphthol transformation decreased with ionic strength, and substrate removal was lowest at neutral pHs. Solution pH influenced the size and the composition of the oligomeric products. An equimolar ratio of H(2)O(2):naphthol was sufficient for optimal naphthol removal. Polymerization products included naphthoquinones and oligomers derived from two, three, and four naphthol molecules. Our results illustrate the importance of water chemistry when considering a peroxidase-based approach for treatment of naphthol-contaminated waters.

Combined assessment of the environmental, economic and social impacts of structural solutions for residential construction

Directory of Open Access Journals (Sweden)

Fraile-García, E.

2015-09-01

Full Text Available Sustainable development in construction is based on three fundamental pillars: economic, environmental and social. This type of approach aims to identify the best possible solutions for sustainably developing structures by conducting a joint evaluation of the impact on those three pillars. The proposed methodology incorporates metadata on the Spanish construction sector. First, a discrete database is generated with 360 alternatives covering a range of common solutions in residential building. A Pareto algorithm is utilized to select the optimal choices and the wide range of solutions is reduced to the 5 % of the initial group. The project manager is therefore provided with an objective assessment of suitable structural alternatives including the overall joint economic, social, and environmental impact. The results obtained demonstrate the importance and utility of the proposed methodology for sustainable construction.El desarrollo sostenible aplicado a la construcción se basa en tres pilares fundamentales: económico, medioambiental y social. El objetivo principal es identificar las mejores soluciones en términos de desarrollo sostenible de alternativas estructurales a partir de la evaluación conjunta de los impactos en dichos pilares. La metodología propuesta incorpora metadatos con información del sector de la construcción en España. Primero se genera una base de datos discreta de 360 alternativas estructurales que cubren el rango de soluciones habituales en edificación residencial. La selección de alternativas óptimas se realiza mediante el algoritmo de Pareto. El abanico de soluciones se reduce al 5 % de las iniciales. Se aporta una valoración objetiva que orienta al proyectista en la selección de alternativas estructurales idóneas, visualizando de forma conjunta el impacto económico, social y ambiental. Los resultados obtenidos muestran la importancia y utilidad de la metodología propuesta en el campo de la construcci

The influence of ultrasonic waves on molecular structure of high impact polystyrene solutions in different solvents

International Nuclear Information System (INIS)

Al-Asaly, S.I.

1991-01-01

The aim of the this research is to study some physical properties of polymer solutions of high-impact polystyrene (HIPS) solutions in two different solvents (carbon tetrachloride, xylene) by using ultrasonic technique. Absorption coefficient and velocity of ultrasonic waves through different concentrations of these solutions were measured using ultrasonic pulsed generator at constant frequency (800) KHz. The result implies that there is no chemical interaction between (HIPS) molecules and the solvents. 5 tabs.; 18 figs.; 59 refs

Evaluation of the environmental impact in Mexico

International Nuclear Information System (INIS)

Mendoza, O.

2004-01-01

The present work, shows the origin and development of the evaluation of the environmental impact in Mexico, like juridical-environmental instrument, it is the environmental politics' s instrument that is relatively new, with the time it has suffered modifications of technical, administrative, law and conceptual nature. It has changed in substantial form, its importance inside the general outline of protection of the natural resources of Mexico, which is reflected in the structure of the organisms that are responsible for applying it. The objectives of the work embrace describing the antecedents of the evaluation of the environmental impact, to provide a reference mark, and to observe the evolution of this juridical instrument, as well as to summarize more outstanding aspects of the evaluation of the environmental impact; making emphasis in the form like it has been related with the environmental politics' s instruments; and to point out the changes that the procedure of evaluation of the environmental impact has fomented in the development outlines, in the technology and even in the human thought. The results of the evaluation and dictamination of the projects that entered to the procedure of environmental impact in the period 1995-2000 are observed that of the 6,100 entered projects, 5,533 were resolved, which means that answer was given to 91% of the total of projects that entered; of the work it can be concluded that this juridical-environmental instrument, it has evolved with the step of the time and it has left adapting according to the juridical, administrative procedures, technicians and of sustainable development of Mexico

Evaluation of connected vehicle impact on mobility and mode choice

Directory of Open Access Journals (Sweden)

Simon Minelli

2015-10-01

Full Text Available Connected vehicle is emerging as a solution to exacerbating congestion problems in urban areas. It is important to understand the impacts of connected vehicle on network and travel behavior of road users. The main objective of this paper is to evaluate the impact of connected vehicle on the mode choice and mobility of transportation networks. An iterative methodology was used in this paper where demands for various modes were modified based on the changes in travel time between each origin-destination (OD pair caused by introduction of connected vehicle. Then a traffic assignment was performed in a micro-simulation model, which was able to accurately simulate vehicle-to-vehicle communication. It is assumed that vehicles are equipped with a dynamic route guidance technology to choose their own route using real-time traffic information obtained through communication. The travel times obtained from the micro-simulation model were compared with a base scenario with no connected vehicle. The methodology was tested for a portion of Downtown Toronto, Ontario, Canada. In order to quantify changes in mode share with changes in travel time associated with each OD pair, mode choice models were developed for auto, transit, cycling and pedestrians using data mainly from the Transportation Tomorrow Survey. The impact of connected vehicle on mode choice was evaluated for different market penetrations of connected vehicle. The results of this study show that average travel times for the whole auto mode will generally increase, with the largest increase from connected vehicles. This causes an overall move away from the auto mode for high market penetrations if a dynamic route guidance algorithm is implemented.

Bio fuel ash in a road construction: impact on soil solution chemistry.

Science.gov (United States)

Thurdin, R T; van Hees, P A W; Bylund, D; Lundström, U S

2006-01-01

Limited natural resources and landfill space, as well as increasing amounts of ash produced from incineration of bio fuel and municipal solid waste, have created a demand for useful applications of ash, of which road construction is one application. Along national road 90, situated about 20 km west of Sollefteå in the middle of Sweden, an experiment road was constructed with a 40 cm bio fuel ash layer. The environmental impact of the ash layer was evaluated from soil solutions obtained by centrifugation of soil samples taken on four occasions during 2001-2003. Soil samples were taken in the ash layer, below the ash layer at two depths in the road and in the ditch. In the soil solutions, pH, conductivity, dissolved organic carbon (DOC) and the total concentration of cations (metals) and anions were determined. Two years after the application of the ash layers in the test road, the concentrations in the ash layer of K, SO4, Zn, and Hg had increased significantly while the concentration of Se, Mo and Cd had decreased significantly. Below the ash layer in the road an initial increase of pH was observed and the concentrations of K, SO4, Se, Mo and Cd increased significantly, while the concentrations of Cu and Hg decreased significantly in the road and also in the ditch. Cd was the element showing a potential risk of contamination of the groundwater. The concentrations of Ca in the ash layer indicated an ongoing hardening, which is important for the leaching rate and the strength of the road construction.

A model on valence state evaluation of TRU nuclides in reprocessing solutions

International Nuclear Information System (INIS)

Uchiyama, Gunzo; Fujine, Sachio; Yoshida, Zenko; Maeda, Mitsuru; Motoyama, Satoshi.

1998-02-01

A mathematical model was developed to evaluate the valence state of TRU nuclides in reprocessing process solutions. The model consists of mass balance equations, Nernst equations, reaction rate equations and electrically neutrality equations. The model is applicable for the valence state evaluation of TRU nuclides in both steady state and transient state conditions in redox equilibrium. The valence state which is difficult to measure under high radiation and multi component conditions is calculated by the model using experimentally measured data for the TRU nuclide concentrations, nitric acid and redox reagent concentrations, electrode potential and solution temperature. (author)

The Value of Example Solutions in Pharmacy Education: The role of seniority and gender

DEFF Research Database (Denmark)

Sandelin, Albin Gustav; Hansen, Helle Rüsz; Baldursdóttir, Stefanía Guðlaug

2011-01-01

Background: Example solutions to problem sets and exams are provided in the majority of pharmacy courses at the University of Copenhagen. Aims: Since the impact and usage of examples solutions are unknown, we wanted to evaluate the positive and negative aspects of the usage of example solutions a...

Evaluation of neutralization treatment processes and their use for uranium tailings solutions

International Nuclear Information System (INIS)

Sherwood, D.R.; Opitz, B.E.; Serne, R.J.

1985-01-01

The potential for groundwater contamination from the typically acidic mill wastes that are disposed of in tailings impoundments is of primary concern at uranium mill sites in the US. Solution-treatment processes provide a system for limiting the environmental impact from acidic seepage. Treatment of uranium tailings solutions from evaporation ponds, underdrains, and surface seeps could aid in decommissioning active sites or be used as an emergency measure to avert possible uncontrolled discharges. At present, neutralization processes appear to be best suited for treating uranium mill tailings solution because they can, at a reasonable cost, limit the solution concentration of many contaminants and thus reduce the potential for groundwater contamination. However, the effectiveness of the neutralization process depends on the reagent used as well as the chemistry of the waste stream. This article provides a description of neutralization processes, an assessment of their performance on acidic uranium tailings leachates, and recommendations for their use at US uranium mill sites

Preliminary evaluation of solution-mining intrusion into a salt-dome repository

International Nuclear Information System (INIS)

1981-06-01

This report is the product of the work of an ONWI task force to evaluate inadvertant human intrusion into a salt dome repository by solution mining. It summarizes the work in the following areas: a general review of the levels of defense that could reduce both the likelihood and potential consequences of human intrusion into a salt dome repository; evaluation of a hypothetical intrusion scenario and its consequences; recommendation for further studies. The conclusions of this task force report can be summarized as follows: (1) it is not possible at present to establish with certainty that solution mining is credible as a human-intrusion event. The likelihood of such an intrusion will depend on the effectiveness of the preventive measures; (2) an example analysis based on the realistic approach is presented in this report; it concluded that the radiological consequences are strongly dependent upon the mode of radionuclide release from the waste form, time after emplacement, package design, impurities in the host salt, the amount of a repository intercepted, the solution mining cavity form, the length of time over which solution mining occurs, the proportion of contaminated salt source for human consumption compared to other sources, and the method of salt purification for culinary purposes; (3) worst case scenarios done by other studies suggest considerable potential for exposures to man while preliminary evaluations of more realistic cases suggest significantly reduced potential consequences. Mathematical model applications to process systems, guided by more advanced assumptions about human intrusion into geomedia, will shed more light on the potential for concerns and the degree to which mitigative measures will be required

Elastic analysis of beam support impact

International Nuclear Information System (INIS)

Salmon, M.A.; Verma, V.K.; Youtsos, T.G.

1982-01-01

The effect of gaps present in the seismic supports of nuclear piping systems has been studied with the use of such large general purpose analysis codes as ANSYS. Exact analytical solutions to two simple beam impact problems are obtained to serve as benchmarks for the evaluation of the ability of such codes to model impact between beam elements and their supports. Bernoulli-Euler beam theory and modal analysis are used to obtain analytical solutions for the motion of simply supported and fixed ended beams after impact with a spring support at midspan. The solutions are valid up to the time the beam loses contact with the spring support. Numerical results are obtained which show that convergence for both contact force and bending moment at the point of impact is slower as spring stiffness is increased. Finite element solutions obtained with ANSYS are compared to analytical results and good agreement is obtained

On the numerical evaluation of algebro-geometric solutions to integrable equations

International Nuclear Information System (INIS)

Kalla, C; Klein, C

2012-01-01

Physically meaningful periodic solutions to certain integrable partial differential equations are given in terms of multi-dimensional theta functions associated with real Riemann surfaces. Typical analytical problems in the numerical evaluation of these solutions are studied. In the case of hyperelliptic surfaces efficient algorithms exist even for almost degenerate surfaces. This allows the numerical study of solitonic limits. For general real Riemann surfaces, the choice of a homology basis adapted to the anti-holomorphic involution is important for a convenient formulation of the solutions and smoothness conditions. Since existing algorithms for algebraic curves produce a homology basis not related to automorphisms of the curve, we study symplectic transformations to an adapted basis and give explicit formulae for M-curves. As examples we discuss solutions of the Davey–Stewartson and the multi-component nonlinear Schrödinger equations

Columbia River impact evaluation plan

Energy Technology Data Exchange (ETDEWEB)

1993-06-01

As a result of past practices, four areas of the Hanford Site (the 100, 200, 300, and 1100 Areas) have been included on the US Environmental Protection Agency`s (EPA`s) National Priorities List (NPL) under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980. To accomplish the timely cleanup of the past-practice units, the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement), was signed by the Washington State Department of Ecology (Ecology), EPA, and the US Department of Energy (DOE). To support the Tri-Party Agreement, milestones were adopted. These milestones represent the actions needed to ensure acceptable progress toward Hanford Site compliance with CERCLA, RCRA, and the Washington State Hazardous Waste Management Act of 1976. This report was prepared to fulfill the requirement of Tri-Party Agreement Milestone M-30-02, which requires a plan to determine cumulative health and environmental impacts to the Columbia River. This plan supplements the CERCLA remedial investigations/feasibility studies (RI/FS) and RCRA facility investigations/corrective measures studies (RFI/CMSs) that will be undertaken in the 100 Area. To support the plan development process, existing information was reviewed and a preliminary impact evaluation based on this information was performed. The purpose of the preliminary impact evaluation was to assess the adequacy of existing data and proposed data collection activities. Based on the results of the evaluation, a plan is proposed to collect additional data or make changes to existing or proposed data collection activities.

Laboratory evaluation of limestone and lime neutralization of acidic uranium mill tailings solution. Progress report

International Nuclear Information System (INIS)

Opitz, B.E.; Dodson, M.E.; Serne, R.J.

1984-02-01

Experiments were conducted to evaluate a two-step neutralization scheme for treatment of acidic uranium mill tailings solutions. Tailings solutions from the Lucky Mc Mill and Exxon Highland Mill, both in Wyoming, were neutralized with limestone, CaCO 3 , to an intermediate pH of 4.0 or 5.0, followed by lime, Ca(OH) 2 , neutralization to pH 7.3. The combination limestone/lime treatment methods, CaCO 3 neutralization to pH 4 followed by neutralization with Ca(OH) 2 to pH 7.3 resulted in the highest quality effluent solution with respect to EPA's water quality guidelines. The combination method is the most cost-effective treatment procedure tested in our studies. Neutralization experiments to evaluate the optimum solution pH for contaminant removal were performed on the same two tailings solutions using only lime Ca(OH) 2 as the neutralizing agent. The data indicate solution neutralization above pH 7.3 does not significantly increase removal of pH dependent contaminants from solution. Column leaching experiments were performed on the neutralized sludge material (the precipitated solid material which forms as the acidic tailings solutions are neutralized to pH 4 or above). The sludges were contacted with laboratory prepared synthetic ground water until several effluent pore volumes were collected. Effluent solutions were analyzed for macro ions, trace metals and radionuclides in an effort to evaluate the long term effectiveness of attenuating contaminants in sludges formed during solution neutralization. Neutralized sludge leaching experiments indicate that Ca, Na, Mg, Se, Cl, and SO 4 are the only constituents which show solution concentrations significantly higher than the synthetic ground water in the early pore volumes of long-term leaching studies

Complete Impact Factor (CIF: A full index to evaluate journal impact

Directory of Open Access Journals (Sweden)

WenJun Zhang

2015-03-01

Full Text Available In this article, a full index to evaluate journal impact, Complete Impact Factor (CIF, was proposed. In general, CIF= total citations for published articles in the journal since it has been sponsored / total number of published articles of the journal since it has been sponsored. CIF changes dynamically over time.

Impact of an Alkaline Solution on the Chemistry, Mineralogy, and Sorption Properties of a Typic Rhodudult Soil

Directory of Open Access Journals (Sweden)

Jaqueline Alves de Almeida Calábria

2017-11-01

Full Text Available Abstract The preferred option for disposal of short-lived low and intermediate level radioactive wastes is a near surface disposal facility in which soil is one of the barriers that avoid radionuclide migration outside the controlled area. For construction of that kind of facility, concrete is widely used, and its interaction with water induces its degradation, resulting in a high pH solution. The alkaline solution may affect the near-field environment of radioactive waste repositories, including the soil, promoting mineralogical alterations that result in significant changes in key properties of materials, compromising their performance as safety components. In this study, a sample of a Brazilian Typic Rhodudult soil, previously investigated concerning its performance for Cs sorption, was subjected to interaction with the alkaline solution for 24 h and for 7, 14, and 28 days in order to evaluate the impact on its chemical, mineralogical, and sorption properties. X-ray diffraction (XRD, energy dispersive X-ray spectroscopy (EDX, atomic absorption spectrometry (AAS, scanning electron microscopy (SEM, and electron microprobe analysis were performed before and after each alteration period. Results indicated dissolution of minerals, such as kaolinite and quartz, associated with incorporation of K and Ca from the alkaline solution, likely resulting in the formation of hydrated calcium silicate phases (CSH, which are expected to be worse sorbents for alkaline elements (e.g., Cs than the original minerals. The Kd values for Cs in the altered samples also decreased according to the alteration period, demonstrating that alkaline interaction effectively modifies the soil sorption properties for Cs.

Evaluation of element migration from food plastic packagings into simulated solutions using radiometric method

International Nuclear Information System (INIS)

Soares, Eufemia Paez; Saiki, Mitiko; Wiebeck, Helio

2005-01-01

In the present study a radiometric method was established to determine the migration of elements from food plastic packagings to a simulated acetic acid solution. This radiometric method consisted of irradiating plastic samples with neutrons at IEA-R1 nuclear reactor for a period of 16 hours under a neutron flux of 10 12 n cm -2 s -1 and, then to expose them to the element migration into a simulated solution. The radioactivity of the activated elements transferred to the solutions was measured to evaluate the migration. The experimental conditions were: time of exposure of 10 days at 40 deg C and 3% acetic acid solution was used as simulated solution, according to the procedure established by the National Agency of Sanitary Monitoring (ANVISA). The migration study was applied for plastic samples from soft drink and juice packagings. The results obtained indicated the migration of elements Co, Cr and Sb. The advantage of this methodology was no need to analyse the blank of simulantes, as well as the use of high purity simulated solutions. Besides, the method allows to evaluate the migration of the elements into the food content instead of simulated solution. The detention limits indicated high sensitivity of the radiometric method. (author)

40 CFR 227.4 - Criteria for evaluating environmental impact.

Science.gov (United States)

2010-07-01

... impact. 227.4 Section 227.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN... Impact § 227.4 Criteria for evaluating environmental impact. This subpart B sets specific environmental... of direct environmental impact. ...

Desorption of 1,3,5-Trichlorobenzene from Multi-Walled Carbon Nanotubes: Impact of Solution Chemistry and Surface Chemistry

Directory of Open Access Journals (Sweden)

Sheikh Uddin

2013-05-01

Full Text Available The strong affinity of carbon nanotubes (CNTs to environmental contaminants has raised serious concern that CNTs may function as a carrier of environmental pollutants and lead to contamination in places where the environmental pollutants are not expected. However, this concern will not be realized until the contaminants are desorbed from CNTs. It is well recognized that the desorption of environmental pollutants from pre-laden CNTs varies with the environmental conditions, such as the solution pH and ionic strength. However, comprehensive investigation on the influence of solution chemistry on the desorption process has not been carried out, even though numerous investigations have been conducted to investigate the impact of solution chemistry on the adsorption of environmental pollutants on CNTs. The main objective of this study was to determine the influence of solution chemistry (e.g., pH, ionic strength and surface functionalization on the desorption of preloaded 1,3,5-trichlorobenzene (1,3,5-TCB from multi-walled carbon nanotubes (MWNTs. The results suggested that higher pH, ionic strength and natural organic matter in solution generally led to higher desorption of 1,3,5-TCB from MWNTs. However, the extent of change varied at different values of the tested parameters (e.g., pH 7. In addition, the impact of these parameters varied with MWNTs possessing different surface functional groups, suggesting that surface functionalization could considerably alter the environmental behaviors and impact of MWNTs.

Evaluation of poly (aspartic acid sodium salt) as a draw solute for forward osmosis.

Science.gov (United States)

Gwak, Gimun; Jung, Bokyung; Han, Sungsoo; Hong, Seungkwan

2015-09-01

Poly (aspartic acid sodium salt) (PAspNa) was evaluated for its potential as a novel draw solute in forward osmosis (FO). The inherent advantages of PAspNa, such as good water solubility, high osmotic pressure, and nontoxicity, were first examined through a series of physicochemical analyses and atomic-scale molecular dynamics simulations. Then, lab-scale FO tests were performed to evaluate its suitability in practical processes. Compared to other conventional inorganic solutes, PAspNa showed comparable water flux but significantly lower reverse solute flux, demonstrating its suitability as a draw solute. Moreover, fouling experiments using synthetic wastewater as a feed solution demonstrated that PAspNa reversely flowed to the feed side reduced inorganic scaling on the membrane active layer. The recyclability of PAspNa was studied using both nanofiltration (NF) and membrane distillation (MD) processes, and the results exhibited its ease of recovery. This research reported the feasibility and applicability of FO-NF or FO-MD processes using PAspNa for wastewater reclamation and brackish water desalination. Copyright © 2015 Elsevier Ltd. All rights reserved.

Evaluating research impact: the development of a ‘RESEARCH for IMPACT’ TOOL

Directory of Open Access Journals (Sweden)

Komla Tsey

2016-08-01

Full Text Available Introduction: This paper describes the development of a ‘Research for Impact’ Tool against a background of concerns about the over-researching of Aboriginal and Torres Strait Islander people’s issues without demonstrable benefits.Material and Methods: A combination of literature reviews, workshops with researchers and reflections by project team members and partners using participatory snowball techniques.Results: Assessing research impact is difficult, akin to so-called ‘wicked problem’, but not impossible. Heuristic and collaborative approach to research that takes in the expectations of research users, those being researched and the funders of research offers a pragmatic solution to evaluating research impact. The proposed ‘Research for Impact’ Tool is based on the understanding that the value of research is to create evidence and/or products to support smarter decisions so as to improve the human condition.Research is of limited value unless the evidence produced is used to inform smarter decisions. A practical way of approaching research impact is therefore to start with the decisions confronting decision makers whether they are government policymakers, professional practitioners or households and the extent to which the research supports smarter decisions and the knock-on consequences of such smart decisions. Embedded at each step in the impact planning, monitoring and evaluation process is the need for Indigenous leadership and participation, capacity enhancement and collaborative partnerships and participatory learning by doing approaches across partners.Discussion: The tool is designed in the context of Indigenous research but the basic idea that the way to assess research impact is to start upfront by defining the users’ of research and their information needs, the decisions confronting them and the extent to which research informs smarter decisions is equally applicable to research in other settings, both applied and

Environmental impact of offshore operation reduced using innovative engineering solutions

International Nuclear Information System (INIS)

Ritchie, C.J.; Wensel, E.A.; Edelblum, L.S.; Beal, D.

1994-01-01

The North Dauphin Island Tract 73 platform is located in eleven feet (3.4 m) of water and one mile (1.6 km) from shore in Mobile Bay, Alabama. The platform is designed to dehydrate and compress up to 70 MMSCFD (1.98 x 10 6 SM 3 ) from five remote gas production wells. Located near the city of Mobile, Alabama, the surrounding metropolitan and coastal areas has multiple uses including manufacturing, tourism, commercial and sport fishing, and wetlands and wildlife conservation. The multiple and interdependent economic uses of the area required that the platform be designed to minimize any adverse environmental impact. A cost-effective environmental engineering solution was desired at the design phase of the project. A water catchment, containment and disposal system was designed to meet the zero discharge requirement. Pollution from air emissions was reduced by the installation of lean burning engines. A floatover installation process was used to prevent dredging of the bay, thus protecting the bay water quality. An aesthetically concealing paint and lighting scheme was chosen and applied to the entire structure. These cost-effective engineering solutions during the design phase of the project saved time and money over the life of the project. All regulatory permits were obtained in a timely manner, with little or no opposition. The operator of the North Dauphin Island Development won several environmental awards due to the implementation of innovative solutions and their commitment to conservation of the natural environment

Evaluation of topical potassium hydroxide solution for treatment of plane warts.

Science.gov (United States)

Al-Hamdi, Khalil I; Al-Rahmani, Moutaz A A

2012-01-01

Plane wart is a common dermatological disease that is caused by human papilloma virus; although the rate of spontaneous recovery is high, it usually takes a long time to occur. Many modalities of treatments have been used but none of them proved to be uniformly effective. Potassium hydroxide (KOH) solution is a well-known keratolytic agent with many dermatological uses. To evaluate the efficacy and tolerability of topical KOH solution in the treatment of plane warts. A total of 250 patients with plane warts, consulting the department of Dermatology and Venereology of Basra Teaching Hospital between March 2008 and October 2009, were enrolled in this opened therapeutic trial study. Patients were divided into two age and sex cross-matched equal groups; patients in group (A) were treated with topical 5% KOH solution once at night, while patients in group (B) were treated with topical 10% KOH solution once nightly. Only 107 patients from group (A) and 95 patients from group (B) completed the study, while the remainders were defaulted for unknown reasons. The patients were evaluated at second and fourth week to assess the cure rates and side effects, those patients who showed complete cure were followed up for 3 months to detect any recurrence. At the end of second week, 9.3% of group (A) patients showed complete disappearance of their warts, vs 66.3% of group (B) patients. At the end of fourth week, 80.3% of group (A) patients showed complete response in comparison with 82.1% of group (B) patients. The side effects for the treating solution in both concentrations include itching, burning sensation, erythema, and temporary dyspigmentations, that were reported in 77.6% of group (A) patients in comparison with 90.5% of group (B) patients. Recurrence rate was reported in 5.8% of group (A) patients vs 5.1% of group (B) patients during the three months period of follow-up. Topical KOH solution is proved to be an effective and safe treatment of plane warts in both

Improving energy efficiency in industrial solutions - Walk the talk

Energy Technology Data Exchange (ETDEWEB)

Wegener, D. (Siemens AG. Industry Solutions Div., Erlangen (Germany)); Finkbeiner, M. (Technische Univ. Berlin (TUB). Sustainable Engineering, Berlin (Germany)); Holst, J.-C.; Walachowicz, F. (Siemens AG. Corporate Technology, Berlin (Germany)); Irving Olsen, S. (Technical Univ. of Denmark (DTU). Management Engineering, Kgs. Lyngby (Denmark))

2011-05-15

This paper describes the outline of the energy efficiency and environmental care policy and management at Siemens Industry Solutions Division. This environmental policy coherently embraces strategic planning, eco-design of energy-efficient industrial processes and solutions, design evaluation and finally communication of both environmental and economic performance of solutions to customers. One of the main tools supporting eco-design and evaluation and controlling of derived design solutions is the so called 'Eco-Care-Matrix' (ECM). The ECM simply visualizes the eco-efficiency of solutions compared to a given baseline. In order to prevent from 'green washing' criticism and to ensure 'walk the talk' attitude the ECM should be scientifically well-founded using appropriate and consistent methodology. The vertical axis of an ECM illustrates the environmental performance and the horizontal axis describes the economical customer benefit of one or more green solutions compared to a defined reference solution. Different scientific approaches for quantifying the environmental performance based on life cycle assessment methodology are discussed especially considering the ISO standards 14040/14044:2006. Appropriate ECM application is illustrated using the example of the Siemens MEROS technology (Maximized Emission Reduction of Sintering) for the steel industry. MEROS is currently the most modern and powerful system for cleaning off-gas in sinter plants. As an environmental technology MEROS is binding and removing sulfur dioxide and other acidic gas components present in the off-gas stream by using dry absorbents and additional electrical power. Advantage in the impact category of acidification potential (by desulfurization) is a trade-off to disadvantages in global warming and resource depletion potential caused by use of electricity. Representing different impacts, indicator results for impact categories with different tendencies have to be

The impact of climate change on the global wine industry: Challenges & solutions

Directory of Open Access Journals (Sweden)

Michelle Renée Mozell

2014-12-01

Full Text Available This paper explores the impact of climate change upon the global production of winegrapes and wine. It includes a review of the literature on the cause and effects of climate change, as well as illustrations of the specific challenges global warming may bring to the production of winegrapes and wine. More importantly, this paper provides some practical solutions that industry professionals can take to mitigate and adapt to the coming change in both vineyards and wineries.

Exploratory Shaft Facility quality assurance impact evaluation

International Nuclear Information System (INIS)

1987-08-01

This report addresses the impact of the quality assurance practices used for the Exploratory Shaft Facility (ESF) design, and construction in licensing as part of the repository. Acceptance criteria used for evaluating the suitability of ESF QA practices are based on documents that had not been invoked for repository design or construction activities at the time of this evaluation. This report identifies the QA practices necessary for ESF design and construction licensability. A review and evaluation of QA practices for ESF design and construction resulted in the following conclusions. QA practices were found to be acceptable with a few exceptions. QA practices for construction activities were found to be insufficiently documented in implementing procedures to allow a full and effective evaluation for licensing purposes. Recommendations are provided for mitigating impacts to ensure compatibility of the QA practices with those considered necessary for repository licensing. 8 refs., 3 tabs

Methodological proposal for environmental impact evaluation since different specific methods

International Nuclear Information System (INIS)

Leon Pelaez, Juan Diego; Lopera Arango Gabriel Jaime

1999-01-01

Some conceptual and practical elements related to environmental impact evaluation are described and related to the preparation of technical reports (environmental impact studies and environmental management plans) to be presented to environmental authorities for obtaining the environmental permits for development projects. In the first part of the document a summary of the main aspects of normative type is made that support the studies of environmental impact in Colombia. We propose a diagram for boarding and elaboration of the evaluation of environmental impact, which begins with the description of the project and of the environmental conditions in the area of the same. Passing then to identify the impacts through a method matricial and continuing with the quantitative evaluation of the same. For which we propose the use of the method developed by Arboleda (1994). Also we propose to qualify the activities of the project and the components of the environment in their relative importance, by means of a method here denominated agglomerate evaluation. Which allows finding those activities more impacting and the mostly impacted components. Lastly it is presented some models for the elaboration and presentation of the environmental management plans. The pursuit programs and those of environmental supervision

Qualitative versus Quantitative Evaluation of Scientists' Impact: A Medical Toxicology Tale

Directory of Open Access Journals (Sweden)

Reza Afshari

2014-12-01

Full Text Available Evaluation of scientists working in a specific area of science is necessary, as they may strive for same limited resources, grants and academic promotions. One of the most common and accepted methods of assessing the performance and impact of a scientist is calculating the number of citations for their publications. However, such method suffer from certain shortcomings. It has become more and more obvious that evaluation of scientists should be qualitative in addition to quantitative. Moreover, the evaluation process should be pragmatic and reflective of the priorities of an institution, a country or an intended population. In this context, a scoring scale called "360-degree researcher evaluation score" is proposed in this paper. Accordingly, scientists are evaluated in 5 independent domains including (I science development, (II economic impact, (III policy impact, (IV societal impact and (V stewardship of research. This scale is designed for evaluation of impacts resulted from research activities and thus it excludes the educational programs done by a scientist. In general, it seems necessary that the evaluation process of a scientist’s impact moves from only scintometric indices to a combination of quantitative and qualitative indices.

Evaluating the Non-Academic Impact of Academic Research: Design Considerations

Science.gov (United States)

Gunn, Andrew; Mintrom, Michael

2017-01-01

Evaluation of academic research plays a significant role in government efforts to steer public universities. The scope of such evaluation is now being extended to include the "relevance" or "impact" of academic research outside the academy. We address how evaluation of non-academic research impact can promote more such impact…

Impacts of operating conditions and solution chemistry on osmotic membrane structure and performance

KAUST Repository

Wong, Mavis C.Y.; Martinez, Kristina; Ramon, Guy Z.; Hoek, Eric M.V.

2012-01-01

Herein, we report on changes in the performance of a commercial cellulose triacetate (CTA) membrane, imparted by varied operating conditions and solution chemistries. Changes to feed and draw solution flow rate did not significantly alter the CTA membrane's water permeability, salt permeability, or membrane structural parameter when operated with the membrane skin layer facing the draw solution (PRO-mode). However, water and salt permeability increased with increasing feed or draw solution temperature, while the membrane structural parameter decreased with increasing draw solution, possibly due to changes in polymer intermolecular interactions. High ionic strength draw solutions may de-swell the CTA membrane via charge neutralization, which resulted in lower water permeability, higher salt permeability, and lower structural parameter. This observed trend was further exacerbated by the presence of divalent cations which tends to swell the polymer to a greater extent. Finally, the calculated CTA membrane's structural parameter was lower and less sensitive to external factors when operated in PRO-mode, but highly sensitive to the same factors when the skin layer faced the feed solution (FO-mode), presumably due to swelling/de-swelling of the saturated porous substructure by the draw solution. This is a first attempt aimed at systematically evaluating the changes in performance of the CTA membrane due to operating conditions and solution chemistry, shedding new insight into the possible advantages and disadvantages of this material in certain applications. © 2011 Elsevier B.V.

Impacts of operating conditions and solution chemistry on osmotic membrane structure and performance

KAUST Repository

Wong, Mavis C.Y.

2012-02-01

Herein, we report on changes in the performance of a commercial cellulose triacetate (CTA) membrane, imparted by varied operating conditions and solution chemistries. Changes to feed and draw solution flow rate did not significantly alter the CTA membrane\\'s water permeability, salt permeability, or membrane structural parameter when operated with the membrane skin layer facing the draw solution (PRO-mode). However, water and salt permeability increased with increasing feed or draw solution temperature, while the membrane structural parameter decreased with increasing draw solution, possibly due to changes in polymer intermolecular interactions. High ionic strength draw solutions may de-swell the CTA membrane via charge neutralization, which resulted in lower water permeability, higher salt permeability, and lower structural parameter. This observed trend was further exacerbated by the presence of divalent cations which tends to swell the polymer to a greater extent. Finally, the calculated CTA membrane\\'s structural parameter was lower and less sensitive to external factors when operated in PRO-mode, but highly sensitive to the same factors when the skin layer faced the feed solution (FO-mode), presumably due to swelling/de-swelling of the saturated porous substructure by the draw solution. This is a first attempt aimed at systematically evaluating the changes in performance of the CTA membrane due to operating conditions and solution chemistry, shedding new insight into the possible advantages and disadvantages of this material in certain applications. © 2011 Elsevier B.V.

Study on applicability of stress intensity factor solutions for flaw evaluation

International Nuclear Information System (INIS)

Miura, Naoki; Nagai, Masaki; Takahashi, Yukio

2014-01-01

Stress intensity factor is the quantity which characterizes the singularity of the stress field near a crack tip in the scheme of the linear elastic fracture mechanics, and is used for fatigue and/or SCC crack propagation evaluation. Stress intensity factor depends on the shape and the size of cracked structures, and is frequently prepared as the tabulated correction factors which are the functions of crack depth ratio, aspect ratio, etc. Some stress intensity factor solutions have been included in the JSME rules on fitness-for-service for nuclear power plants. Many of them have been significantly revised on the latest (2012) version of the rules, however, the validation of the revised solutions was not adequate so far. In this study, the implication of the revision was investigated together with its technical basis. A comprehensive comparison was made between available solutions including the 2008 and 2012 version of the rules. It was ascertained that the solutions in the 2012 version provided stress intensity factors consistent with the previous version and the referential stress intensity factors. (author)

Wilderness educators' evaluation of the Impact Monster Program

Science.gov (United States)

William W. Hendricks; Alan E. Watson

1999-01-01

Since its development by Jim Bradley in the late 1970s, the Impact Monster, a wilderness education skit designed to teach minimum impact techniques, has been used as a wilderness education tool by federal land management agencies. This paper reports on an evaluation of the perceived effectiveness of the Impact Monster program and its content. Results indicate that the...

Operational Contract Support: Economic Impact Evaluation and Measures of Effectiveness

Science.gov (United States)

2017-12-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA MBA PROFESSIONAL REPORT OPERATIONAL CONTRACT SUPPORT: ECONOMIC IMPACT EVALUATION AND MEASURES...DATES COVERED MBA professional report 4. TITLE AND SUBTITLE OPERATIONAL CONTRACT SUPPORT: ECONOMIC IMPACT EVALUATION AND MEASURES OF EFFECTIVENESS 5...evaluation, expeditionary economics , operational contract support, measure of effectiveness 15. NUMBER OF PAGES 89 16. PRICE CODE 17. SECURITY

A Danish case. Portfolio evaluation and its impact on energy efficiency policy

Energy Technology Data Exchange (ETDEWEB)

Togeby, M.; Dyhr-Mikkelsen, K. [Ea Energy Analyses, Frederiksholms Kanal 4, 1220 Copenhagen K (Denmark); Larsen, A.E. [Department of Society and Globalisation, Roskilde University, Universitetsvej 1, 4000 Roskilde (Denmark); Bach, P. [Danish Energy Agency, Amaliegade 44, 1256 Copenhagen K (Denmark)

2012-01-15

A political agreement from 2005 stated that an evaluation of the entire Danish energy efficiency policy portfolio must be carried out before the end of 2008, with the aim to assess the following: (1) Is the policy portfolio sufficient to meet the energy efficiency targets? (2) Do the policies enable the national goals to be met in a cost-effective manner? (3) Is the overall design of the policy portfolio appropriate? The evaluation gave recommendations on how to improve and develop the portfolio, mainly using cost-effectiveness as criteria. The evaluation was completed in December 2008, and this paper presents the main findings and the subsequent impact on Danish policy. A key lesson learned is the importance of including all energy efficiency policies in the evaluation. Examining the entire portfolio of policies (as opposed to only selected policies) gave way to findings that would otherwise not have been captured. With its broad perspective, the evaluation found that the policy instruments prioritised the commercial and industrial sectors less than the household and public sectors. The recommendations made by the authors contributed to the implementation of new taxes for the commercial and industrial sectors together with the reform of the Electricity Saving Trust to a Centre for Energy Savings charged with energy savings within all sectors, except transport - both which have been important steps towards a more cost-effective solution.

Evaluation of solution procedures for material and/or geometrically nonlinear structural analysis by the direct stiffness method.

Science.gov (United States)

Stricklin, J. A.; Haisler, W. E.; Von Riesemann, W. A.

1972-01-01

This paper presents an assessment of the solution procedures available for the analysis of inelastic and/or large deflection structural behavior. A literature survey is given which summarized the contribution of other researchers in the analysis of structural problems exhibiting material nonlinearities and combined geometric-material nonlinearities. Attention is focused at evaluating the available computation and solution techniques. Each of the solution techniques is developed from a common equation of equilibrium in terms of pseudo forces. The solution procedures are applied to circular plates and shells of revolution in an attempt to compare and evaluate each with respect to computational accuracy, economy, and efficiency. Based on the numerical studies, observations and comments are made with regard to the accuracy and economy of each solution technique.

Evaluation of topical potassium hydroxide solution for treatment of plane warts

Directory of Open Access Journals (Sweden)

Khalil I Al-Hamdi

2012-01-01

Full Text Available Background: Plane wart is a common dermatological disease that is caused by human papilloma virus; although the rate of spontaneous recovery is high, it usually takes a long time to occur. Many modalities of treatments have been used but none of them proved to be uniformly effective. Potassium hydroxide (KOH solution is a well-known keratolytic agent with many dermatological uses. Objective: To evaluate the efficacy and tolerability of topical KOH solution in the treatment of plane warts. Materials and Methods: A total of 250 patients with plane warts, consulting the department of Dermatology and Venereology of Basra Teaching Hospital between March 2008 and October 2009, were enrolled in this opened therapeutic trial study. Patients were divided into two age and sex cross-matched equal groups; patients in group (A were treated with topical 5% KOH solution once at night, while patients in group (B were treated with topical 10% KOH solution once nightly. Only 107 patients from group (A and 95 patients from group (B completed the study, while the remainders were defaulted for unknown reasons. The patients were evaluated at second and fourth week to assess the cure rates and side effects, those patients who showed complete cure were followed up for 3 months to detect any recurrence. Results: At the end of second week, 9.3% of group (A patients showed complete disappearance of their warts, vs 66.3% of group (B patients. At the end of fourth week, 80.3% of group (A patients showed complete response in comparison with 82.1% of group (B patients. The side effects for the treating solution in both concentrations include itching, burning sensation, erythema, and temporary dyspigmentations, that were reported in 77.6% of group (A patients in comparison with 90.5% of group (B patients. Recurrence rate was reported in 5.8% of group (A patients vs 5.1% of group (B patients during the three months period of follow-up. Conclusions: Topical KOH solution is

Final Environmental Impact Statement to construct and operate the Crownpoint Uranium Solution Mining Project, Crownpoint, New Mexico

International Nuclear Information System (INIS)

1997-02-01

This Final Environmental Impact Statement (FEIS) addresses the proposed action of issuing a combined source and 11e(2) byproduct material license and minerals operating leases for Federal and Indian lands to Hydro Resources, Inc. (HRI). This action would authorize HRI to conduct in-situ leach uranium mining in McKinley County, New Mexico. Such mining would involve drilling wells to access the ore bodies, then recirculating groundwater with added oxygen to mobilize uranium found in the ore. Uranium would then be removed from the solution using ion exchange technology in processing plants located at three separate sites. As proposed by HRI, a central plant would provide drying and packaging equipment for the entire project. The Draft Environmental Impact Statement (DEIS) for the proposed action was prepared by an interagency review group comprising staff from the Nuclear Regulatory Commission, the Bureau of Indian Affairs, and the Bureau of Land Management, and published in October 1994. After evaluating the environmental impacts of the proposed action in the DEIS, the reviewing agencies concluded that the appropriate action was to issue the requested license and proposed leases authorizing HRI to proceed with the project. This FEIS reevaluates the proposed licensing action on the basis of written and oral comments received on the DEIS and on additional information obtained in 1995 and 1996. The FEIS describes and evaluates (1) the purpose of and need for the proposed action, (2) alternatives to the proposed action, (3) the environmental resources that could be affected by the proposed action and alternatives, (4) the potential environmental consequences of the proposed action and alternatives, and (5) the economic costs and benefits associated with the proposed action. Based on this assessment, the FEIS makes recommendations concerning the requested license and proposed leases

Evaluation and comparison of two complexometric titration methods for determining of lanthanum in cloridric solutions

International Nuclear Information System (INIS)

Menezes, M.F.; Santos, R.L.C. dos; Goes, M.A.C. de

1994-01-01

The fast determination of total rare earth concentration in aqueous solutions is based on titrimetric methods using EDTA as complexing agent. This paper evaluates two among several others titrimetric methods used in the determination of lanthanum in hydrochloric acid solutions, using xylenol orange and a mixture of methyl orange and xylenol orange as indicators. The applied statistical evaluation allowed the determination of the stability, accuracy and adequacy of these methods on a given technical specification. (author). 12 refs., 03 tabs., 01 fig

Buffering Negative Impacts of Divorce on Children: Evaluating Impact of Divorce Education

Science.gov (United States)

Crawford, Jennifer K.; Riffe, Jane; Trevisan, Dominic A.; Adesope, Olusola O.

2014-01-01

Following the call for more stringent evaluation methodology and recently documented national Extension presence in the field of divorce education for parents and children, the study reported here describes a local multi-level evaluation to capture program impact of a stakeholder-accepted divorce education program. Using a post-then-pre…

Evaluation of the seat fastening in the frame of a road bus submitted to frontal impact

Directory of Open Access Journals (Sweden)

Márcio Walber

Full Text Available The collective intercity transportation by bus is currently a mean of locomotion much sought after by people. Security in accidents is a very important factor that must be taken into account in design of bus body structure, being the evaluation of passenger safety of this type of vehicle is an important subject that should be checked, because in many accidents occur disconnection between seats and fastening members causing serious passengers injury, often fatal. This work aims at evaluation the behavior of frame fixing of seats of intercity bus bodies, submitted to the frontal impact situation in a rigid wall of 100% offset, through evaluation by finite element method (FEM. This study uses a numerical model corresponding to the body structure and chassis, developed through flexible beam elements, combining with shell elements for the structure of the seats and its fastening members, with the objective of not missing the essential aspects of the problem, allowing the solution with a reduced computational time. The numerical model of bus body and seat was impacted against a rigid wall at a speed of 8.89 m/s, being its validation according to the deceleration curve established by Regulation 80. Then it was gotten the Von Mises stress in fastening members of the seat structure in bus body. It is also presented a proposal to improve the fastening of the seat structure, comparing the results of the stress gotten in the two types fastening submitted to the frontal impact.

International funding agencies: potential leaders of impact evaluation in protected areas?

Science.gov (United States)

Craigie, Ian D; Barnes, Megan D; Geldmann, Jonas; Woodley, Stephen

2015-11-05

Globally, protected areas are the most commonly used tools to halt biodiversity loss. Yet, some are failing to adequately conserve the biodiversity they contain. There is an urgent need for knowledge on how to make them function more effectively. Impact evaluation methods provide a set of tools that could yield this knowledge. However, rigorous outcome-focused impact evaluation is not yet used as extensively as it could be in protected area management. We examine the role of international protected area funding agencies in facilitating the use of impact evaluation. These agencies are influential stakeholders as they allocate hundreds of millions of dollars annually to support protected areas, creating a unique opportunity to shape how the conservation funds are spent globally. We identify key barriers to the use of impact evaluation, detail how large funders are uniquely placed to overcome many of these, and highlight the potential benefits if impact evaluation is used more extensively. © 2015 The Author(s).

Development and psychometric evaluation of the Impact of Health Information Technology (I-HIT) scale.

Science.gov (United States)

Dykes, Patricia C; Hurley, Ann; Cashen, Margaret; Bakken, Suzanne; Duffy, Mary E

2007-01-01

The use of health information technology (HIT) for the support of communication processes and data and information access in acute care settings is a relatively new phenomenon. A means of evaluating the impact of HIT in hospital settings is needed. The purpose of this research was to design and psychometrically evaluate the Impact of Health Information Technology scale (I-HIT). I-HIT was designed to measure the perception of nurses regarding the ways in which HIT influences interdisciplinary communication and workflow patterns and nurses' satisfaction with HIT applications and tools. Content for a 43-item tool was derived from the literature, and supported theoretically by the Coiera model and by nurse informaticists. Internal consistency reliability analysis using Cronbach's alpha was conducted on the 43-item scale to initiate the item reduction process. Items with an item total correlation of less than 0.35 were removed, leaving a total of 29 items. Item analysis, exploratory principal component analysis and internal consistency reliability using Cronbach's alpha were used to confirm the 29-item scale. Principal components analysis with Varimax rotation produced a four-factor solution that explained 58.5% of total variance (general advantages, information tools to support information needs, information tools to support communication needs, and workflow implications). Internal consistency of the total scale was 0.95 and ranged from 0.80-0.89 for four subscales. I-HIT demonstrated psychometric adequacy and is recommended to measure the impact of HIT on nursing practice in acute care settings.

A Blended Learning Solution and the Impacts on Attendance and Learning Outcomes

Directory of Open Access Journals (Sweden)

Ismo Hakala

2011-05-01

Full Text Available Blended learning based on lecture videos and face-to-face teaching provides good opportunities for students for participation in education, regardless of time or place. The article describes a blended learning solution that is based on face-to-face teaching and the use of streaming lecture videos as it has developed in connection with master studies in mathematical information technology. The particular focus of this article is on the use of lecture videos and the impacts of blended learning on participation in education and on learning outcomes. According to the results, lecture videos have become very popular among students. Moreover the use of lecture videos increases participation activeness, and the increase in participation has a positive impact on completion of courses. However, the use of lecture videos does not seem to have any clear-cut effect on grades obtained.

Evaluating Remote Reference Service: A Practical Guide to Problems and Solutions

Science.gov (United States)

Pomerantz, Jeffrey; Mon, Lorri; McClure, Charles R.

2008-01-01

This paper identifies key methodological issues affecting quality of data in the evaluation of remote reference services. Despite a growing number of studies in this area, no comprehensive effort has been made to identify potential problems and suggest solutions. The strategies proposed in this paper offer practical ways in which libraries can…

Evaluation of Recommender Systems for Technology-Enhanced Learning: Challenges and Possible Solutions

NARCIS (Netherlands)

Sandy, Heleau; Drachsler, Hendrik; Gillet, Dennis

2009-01-01

Heleou, S., Drachsler, H., & Gillet, D. (2009). Evaluation of Recommender Systems for Technology-Enhanced Learning: Challenges and Possible Solutions. 1st workshop on Context-aware Recommender Systems for Learning at the Alpine Rendez-Vous. November, 30-December, 3, 2009, Garmisch-Patenkirchen,

EVALUATION OF THE IMPACT OF PUBLIC INVESTMENTS ON THE ENVIRONMENT ON THE EXAMPLE OF STADIUM IMPLEMENTATION

Directory of Open Access Journals (Sweden)

Elżbieta Hanna Szafranko

2017-10-01

Full Text Available Public purpose investments constitute a special group among the construction investments. They are generally large and their construction is conditioned by the needs of the local communities. The regulations impose the need to analyze variants of this type of investment and to take into account the solutions that cause the low environmental damage. The analyzed example is a specific object, mainly due to the presence of very large groups of people during sporting events. The analysis of the evaluation criteria should cover different location variants as well as design and construction solutions. The assessment of investment variants in this paper takes into account the specific function of the facility, and the criteria used in the analysis concern such phenomena as pollution and noise reduction, environmental impact, collisions with environmental elements, and the ability to safely park a large number of cars. Due to the large number of factors involved in the procedure, it is necessary to employ effective methods of supporting the decision-making processes. The article describes an example of evaluating variants using multicriteria analysis methods. The obtained results confirmed the usefulness of the proposed procedure.

Evaluating the impact of agricultural extension programmes in sub-Saharan Africa: Challenges and prospects

Directory of Open Access Journals (Sweden)

Hailemichael Taye

2013-09-01

Full Text Available Background: In sub-Saharan Africa (SSA, impact evaluation has been used to assess whether agricultural extension interventions have brought the intended result or to establish causal linkages between interventions and outcomes. However, there is some scepticism about the validity and reliability of the results of the impact evaluation reports due to some contradictory and exaggerated results. Objectives: This article analyses some impact evaluation studies conducted in SSA as to why contradictions and exaggerations are manifested in some reports and what would be the future prospects of impact evaluation of agricultural extension programmes in the region. Methods: Impact evaluation reports and results of agricultural extension programmes from 10 SSA countries were reviewed and analysed based on impact evaluation principles and theories. Results: The results show that most of the evaluations reported positive impacts. There are also conflicting reports on extension performance. The fact that the overwhelming majority of impact evaluation reports claim positive extension impacts is not in line with the reports on agricultural productivity growth in the region. There are various reasons for over estimated impacts and contradictory results, which include use of poor impact evaluation methodologies, lack of reliable data and insufficient capacity to conduct rigorous impact evaluations. Conclusion: Due to these challenges and the shift in agricultural research and extension approaches, it is recommended that rather than investing effort in trying to prove impact, greater attention should be given to improving impact as well as using other innovative monitoring and evaluation (M&E and learning tools that consider the dynamic nature of agricultural development.

Economic evaluation of environmental impacts of open cast mining project - an approach

International Nuclear Information System (INIS)

Maiti, S.K.; Pathak, K.

1998-01-01

Economic valuation of environmental attributes are pragmatic approach to evaluating the impacts and it helps decision makers to arrive at objective decisions on the basis of cost benefit ratio. For determining the physical impact and its quantification, four evaluation methods, namely-market price method, surrogate market price, survey based and cost based approaches are generally used. The present paper reviews the importance of environmental evaluation of impacts of mining and also reviews a few suitable methodologies that could be effectively used for economic evaluation of environmental impacts in open cast mining projects. (author)

An environmental impact measure for nuclear fuel cycle evaluation

International Nuclear Information System (INIS)

Ahn, Joonhong

2004-01-01

Review of the models and measures for repository performance assessment has revealed that dedicated measures for environmental impacts need to be developed for the purpose of nuclear-fuel-cycle evaluation from the viewpoint of environmental impact minimization. The present study proposes the total toxicity index of released radionuclides that have accumulated in the region exterior to the repository as an environmental impact measure. The measure is quantitatively evaluated by a radionuclide transport model that incorporates the effects of canister-array configuration and the initial mass loading in the waste canister. With the measure, it is demonstrated that the environmental impact of the repository can be effectively reduced by reduction of the initial mass loading and change in the canister-array configuration in the repository. Environmental impacts of the mill tailings and the depleted uranium are as important as those from the high-level radioactive wastes repository. For a fair comparison of various fuel cycles, the sum of these impacts should be compared. (author)

Spanish method of visual impact evaluation in wind farms

Energy Technology Data Exchange (ETDEWEB)

Hurtado, J.P.; Parrondo, J.L.; Blanco, E. [Universidad de Oviedo, Gijon (Spain). Dpto. de Energia; Fernandez, J. [Universidad de Extremadura, Badajoz (Spain). Dpto. de Electronica e Ingenieria Electromecanica

2004-10-01

The present Spanish laws on the procedure to evaluate the environmental impact of wind farms are ambiguous, especially those pertaining to visual impact. There is no specific national law but only regional laws. The main targets of these laws are the conservation of the environment (protected animals and plants), and the noise generated. The focus of this paper, the visual impact, is not taken into account in a direct way in these laws. This work develops a methodology to predict, before its construction, the visual impact that a wind farm can have. This could be used as a consulting tool to analyse and evaluate wind projects, both government-run and private. The developed methodology is quick, concise and clear. (author)

Study design considerations in evaluating environmental impacts

Science.gov (United States)

Stan T. Lebow; Paul A. Cooper; Patricia Lebow

2006-01-01

The purpose of this chapter is to make the reader aware of how choices in study parameters may influence the outcome of treated-wood environmental impact evaluations. Evaluation of the leaching and environmental accumulation of preservatives from treated wood is a complex process. and many factors can influence the results of such studies. In laboratory studies, the...

PFP solution stabilization

International Nuclear Information System (INIS)

Aftanas, B.L.

1996-01-01

This Functional Design Criteria (FDC) addresses remediation of the plutonium-bearing solutions currently in inventory at the Plutonium Finishing Plant (PFP). The recommendation from the Environmental Impact Statement (EIS) is that the solutions be treated thermally and stabilized as a solid for long term storage. For solutions which are not discardable, the baseline plan is to utilize a denitration process to stabilize the solutions prior to packaging for storage

Voltage quality: solutions of desensitization; Qualite de la tension: les solutions de desensibilisation

Energy Technology Data Exchange (ETDEWEB)

Anon.

1999-10-01

The occurrence of voltage drops and cuts can lead to major malfunctions in electrical installations with sometimes important economical impacts. Thus, the use of solutions of desensitization are needed to avoid such disturbances. This technical paper gives a summary of the basic solutions elaborated by Electricite de France (EdF) with the participation of electrical engineering associations in order to solve the problems encountered in existing installations and to provide specifications for the newly designed installations: the desensitization process (origin of voltage drops, solutions, costs), the diagnosis of industrial installations (identification, quantitative analysis and recording of disturbances, complementary informations, causes, economical impact, solutions, costs, remedial action), the general and specific solutions of desensitization (instrumentation and control systems, switches, relays, motors, speed regulators and variators), specific solutions for computerized and electronic systems, and the role of batteries. (J.S.)

Blood gas analysis, anion gap, and strong ion difference in horses treated with polyethylene glycol balanced solution (PEG 3350) or enteral and parenteral electrolyte solutions

OpenAIRE

Gomes, Cláudio Luís Nina; Ribeiro Filho, José Dantas; Faleiros, Rafael Resende; Dantas, Fernanda Timbó D'el Rey; Amorim, Lincoln da Silva; Dantas, Waleska de Melo Ferreira

2014-01-01

Large volumes of different electrolytes solutions are commonly used for ingesta hydration in horses with large colon impaction, but little is known about their consequences to blood acid-base balance. To evaluate the effects of PEG 3350 or enteral and parenteral electrolyte solutions on the blood gas analysis, anion gap and strong ion difference, five adult female horses were used in a 5x5 latin square design. The animals were divided in five groups and distributed to each of the following tr...

Evaluation of sodium lignin sulfonate as draw solute in forward osmosis for desert restoration

KAUST Repository

Duan, Jintang

2014-03-01

Sodium lignin sulfonate (NaLS), an abundant waste product of paper manufacturing, can be used in desert restoration. Combined with water and applied on arid land, NaLS has been shown to stabilize sand and provide a medium for plant growth. Here, we demonstrate that NaLS is an efficient draw solute in forward osmosis (FO) to extract water from impaired sources. The osmotic pressure of a 600. g. NaLS/kg water solution is 78. bar (7.8 MPa) as measured by freezing point depression. The FO performance using NaLS draw solute was evaluated with commercial FO membranes under various test conditions. The effects of draw solute concentration, feed salinity and membrane orientation were systematically investigated. Potential ways to optimize the process, e.g. combining fertilizer draw solutes and NaLS, are proposed. © 2013 Elsevier B.V.

Essays on Impact evaluation: new empirical evidence from Vietnam

NARCIS (Netherlands)

Nguyen Viet Cuong, N.

2009-01-01

Keywords: Credit, cash transfers, remittances, migration, poverty, inequality, impact evaluation, Vietnam, Asia

This study estimates the impact of various economic flows including government-subsidized micro-credit, informal credit, public and private transfers, international

Structural evaluation of spent nuclear fuel storage facilities under aircraft crash impact. Numerical study on evaluation of sealing performance of metal cask subjected to impact force

International Nuclear Information System (INIS)

Namba, Kosuke; Shirai, Koji; Saegusa, Toshiari

2008-01-01

A lot of safety evaluations on the important nuclear facilities against the aircraft crash have been reported in other countries. But the condition and the evaluation method to define impact force of aircraft crash have not been described clearly in the reports. In Japan, public concern with the safety evaluation against aircraft crash is increasing. It is important to make clear the behavior of the storage facilities installing the metal casks on impact loading due to aircraft crash. In this study, concerning crash between commercial aircraft and storage facility, impact analysis using dynamic analysis code LS-DYNA has been executed. The results showed that the storage facility was not completely destroyed. But the rigid aircraft engine may penetrate into the storage facility with local failure. Thus, we assumed the engine hit a metal cask in the storage facility and evaluated sealing performance of the metal cask under the impact loading. If the engine with 90m/s crashed the storage facility having concrete wall of 85cm in thickness, the remaining velocity became 60m/s after penetration. We calculated impact force of the engine with 60m/s crashing into the metal cask. Concerning the metal cask loaded the impact force, impact analysis was executed. We assumed two directions of impact force. One is vertical load and another is horizontal load against the cask. The result showed that plastic strain was not generated on flanges of the 1st lid and the sealing performance of the cask was maintained in each impact case. (author)

Performance Evaluation of Absorbent Solution for Draw Solute Recovery in Forward Osmosis Desalination Process

International Nuclear Information System (INIS)

Kim, Young; Lee, Jong Hoon; Lee, Kong Hoon; Kim, Yu-Chang; Oh, Dong Wook; Lee, Jungho

2013-01-01

Although forward osmosis desalination technology has drawn substantial attention as a next-generation desalination method, the energy efficiency of its draw solution treatment process should be improved for its commercialization. When ammonium bicarbonate is used as the draw solute, the system consists of forward-osmosis membrane modules, draw solution separation and recovery processes. Mixed gases of ammonia and carbon dioxide generated during the draws solution separation, need to be recovered to re-concentrate ammonium bicarbonate solution, for continuous operation as well as for the economic feasibility. The diluted ammonium bicarbonate solution has been proposed as the absorbent for the draw solution regeneration. In this study, experiments are conducted to investigate performance and features of the absorption corresponding to absorbent concentration. It is concluded that ammonium bicarbonate solution can be used to recover the generated ammonia and carbon dioxide. The results will be applied to design and operation of pilot-scale forward-osmosis desalination system

Performance Evaluation of Absorbent Solution for Draw Solute Recovery in Forward Osmosis Desalination Process

Energy Technology Data Exchange (ETDEWEB)

Kim, Young; Lee, Jong Hoon; Lee, Kong Hoon; Kim, Yu-Chang; Oh, Dong Wook; Lee, Jungho [Korea Institute of Machinery Materials, Daejeon (Korea, Republic of)

2013-04-15

Although forward osmosis desalination technology has drawn substantial attention as a next-generation desalination method, the energy efficiency of its draw solution treatment process should be improved for its commercialization. When ammonium bicarbonate is used as the draw solute, the system consists of forward-osmosis membrane modules, draw solution separation and recovery processes. Mixed gases of ammonia and carbon dioxide generated during the draws solution separation, need to be recovered to re-concentrate ammonium bicarbonate solution, for continuous operation as well as for the economic feasibility. The diluted ammonium bicarbonate solution has been proposed as the absorbent for the draw solution regeneration. In this study, experiments are conducted to investigate performance and features of the absorption corresponding to absorbent concentration. It is concluded that ammonium bicarbonate solution can be used to recover the generated ammonia and carbon dioxide. The results will be applied to design and operation of pilot-scale forward-osmosis desalination system.

Assessing Impact Submissions for REF 2014: An Evaluation

Science.gov (United States)

Manville, Catriona; Guthrie, Susan; Henham, Marie-Louise; Garrod, Bryn; Sousa, Sonia; Kirtley, Anne; Castle-Clarke, Sophie; Ling, Tom

2015-01-01

The Research Excellence Framework (REF) is a new system for assessing the quality of research in UK higher education institutions (HEIs). For the first time, part of the assessment included the wider impact of research. RAND Europe was commissioned to evaluate the assessment process of the impact element of REF submissions, and to explore the…

Evaluation of recent GRACE monthly solution series with an ice sheet perspective

Science.gov (United States)

Horwath, Martin; Groh, Andreas

2016-04-01

GRACE monthly global gravity field solutions have undergone a remarkable evolution, leading to the latest (Release 5) series by CSR, GFZ, and JPL, to new series by other processing centers, such as ITSG and AIUB, as well as to efforts to derive combined solutions, particularly by the EGSIEM (European Gravity Service for Improved Emergency Management) project. For applications, such as GRACE inferences on ice sheet mass balance, the obvious question is on what GRACE solution series to base the assessment. Here we evaluate different GRACE solution series (including the ones listed above) in a unified framework. We concentrate on solutions expanded up to degree 90 or higher, since this is most appropriate for polar applications. We empirically assess the error levels in the spectral as well as in the spatial domain based on the month-to-month scatter in the high spherical harmonic degrees. We include empirical assessment of error correlations. We then apply all series to infer Antarctic and Greenland mass change time series and compare the results in terms of apparent signal content and noise level. We find that the ITSG solutions show lowest noise level in the high degrees (above 60). A preliminary combined solution from the EGSIEM project shows lowest noise in the degrees below 60. This virtue maps into the derived ice mass time series, where the EGSIEM-based results show the lowest noise in most cases. Meanwhile, there is no indication that any of the considered series systematically dampens actual geophysical signals.

A methodology for evaluating social impact of Environmental Education Master Training Program

Directory of Open Access Journals (Sweden)

Loret de Mola, E.

2014-01-01

Full Text Available The paper is intended to describe a methodology for evaluating social impact of Environmental Education master training program by presenting its main stages. The framework serving as starting point and other empirical methods lead to systematized and define the terms of environmental professional training, professional performance of the environmental educator, evaluation, evaluation of professional performance of environmental educators and impact evaluation; as well as distinguishing the functions of impact evaluation in the postgraduate program favoring professor, tutors and trainees development. Previously appraised by consulting experts who gave it high ranks, this methodology is currently being used in evaluating second and third editions.

Solution Treatment Effect on Tensile, Impact and Fracture Behaviour of Trace Zr Added Al-12Si-1Mg-1Cu Piston Alloy

Science.gov (United States)

Kaiser, Md. Salim

2018-04-01

The effects of T6 solution treatment on tensile, impact and fracture properties of cast Al-12Si-1Mg-1Cu piston alloys with trace of zirconium were investigated. Cast alloys were given precipitation strengthening treatment having a sequence of homogenizing, solutionizing, quenching and ageing. Both cast and solutionized samples are isochronally aged for 90 min at different temperatures up to 300 °C. Tensile and impact properties of the differently processed alloys have been studied to understand the precipitation strengthening of the alloys. Fractograpy of the alloys were observed to understand the mode of fracture. It is observed that the improvement in tensile properties in the aged alloys through heat treatment is mainly attributed to the formation of the Al2Cu and Mg2Si precipitates within the Al matrix. Solution treatment improves the tensile strength for the reason that during solution treatment some alloying elements are re-dissolved to produce a solute-rich solid solution. Impact energy decreases with ageing temperature due to formation of GP zones, β' and β precipitates. The fractography shows large and small dimple structure and broken or cracked primary Si, particles. Microstructure study of alloys revealed that the solution treatment improved distribution of silicon grains. The addition of Zr produces an improvement in the tensile properties as a result of its grain refining action and grain coarsening resistance in the matrix at a higher temperature.

DIGITAL SOLUTION FOR FAST EVALUATION OF THE POWER FACTOR IN POWER NETWORKS

Directory of Open Access Journals (Sweden)

Adrian Gligor

2017-06-01

Full Text Available Power quality evaluation involves measurements and determinations of some power quality indicators. One of these indicators is represented by the power factor. The importance of the power factor as an indicator of power quality, both theoretical and practical, implies its determination or direct measurement as a necessity, especially in industrial environments where the optimization of energy costs is a primary target. Considering these, the determination of this power quality indicator implies multiple or sophisticated measurement tools. As a result, the present paper aims to present a solution for an easier evaluation of the power factor. The proposed solution can be integrated in numerical control systems for reactive power monitoring or in supervision and control systems in order to extend the applicability for the automatic power factor improvement. The proposed solution is characterized by simplicity and a low cost of implementation, representing an effective learning tool in the professional training in the electricity field. The configuration of the measurement circuit was designed to allow the measurement of a wide range of the power factor, starting from the case of inductive consumers to the case of capacitive consumers, noting that in the case of strongly deformed regimes the results shows significant deviations from the expected ones fact that is extensively exposed and motivated in the paper.

Impact of Industrialization on Environment and Sustainable Solutions - Reflections from a South Indian Region

Science.gov (United States)

Patnaik, Rasmi

2018-03-01

Industrialization has brought economic prosperity; additionally it has resulted in more population, urbanization, obvious stress on the basic life supporting systems while pushing the environmental impacts closer to the threshold limits of tolerance. With booming industrial growth and relatively low land mass, environmental sustainability is now becoming a significant deciding factor in industrial development process. Accumulating evidences constantly indicate that the transition of the existing industries into eco-industrial network through successful implementation of green approaches provides a viable solution to preserve the natural resources of the region while concurrently enhances the regional economy on a sustainable basis. It calls for an appropriate planning and integrated framework in harmony with the environment, after careful assessment of past and prevailing conditions. The empirical knowledge on affected area helps understanding the local context and developing further course of action based on ground realities. With this aim, a study was conducted on the current industrial pollution and environmental setting of Puducherry. A causal chain analysis indicated severe impacts of industrialization on local environment while highlighting its immediate and root causes. The findings form a base for suggesting sustainable solutions to curb rampant pollution in Puducherry region and similar scenarios found across the world.

Value assignment and uncertainty evaluation for single-element reference solutions

Science.gov (United States)

Possolo, Antonio; Bodnar, Olha; Butler, Therese A.; Molloy, John L.; Winchester, Michael R.

2018-06-01

A Bayesian statistical procedure is proposed for value assignment and uncertainty evaluation for the mass fraction of the elemental analytes in single-element solutions distributed as NIST standard reference materials. The principal novelty that we describe is the use of information about relative differences observed historically between the measured values obtained via gravimetry and via high-performance inductively coupled plasma optical emission spectrometry, to quantify the uncertainty component attributable to between-method differences. This information is encapsulated in a prior probability distribution for the between-method uncertainty component, and it is then used, together with the information provided by current measurement data, to produce a probability distribution for the value of the measurand from which an estimate and evaluation of uncertainty are extracted using established statistical procedures.

Evaluating the life cycle environmental impact of short span bridges

DEFF Research Database (Denmark)

Du, Guangli; Pettersson, Lars; Karoumi, Raid

2016-01-01

impact of the construction sector. Life cycle assessment (LCA) is a systematic method for assessing the environmental impact of products and systems, but its application in bridges is scarce. In Swede, most of the bridges are short spans and the type of concrete slab-frame bridge (CFB) accounts...... for a large share. Soil steel composite bridge (SSCB) is a functional equivalent solution for CFB. In order to mitigate the environmental burdens of short span bridges, this paper performed a comparative LCA study between these two types of bridge. The results indicate that the initial material consumption...

THE EVALUATION SYSTEM OF DESIGN SOLUTIONS FOR RESIDENTIAL PROPERTY ON THE PRE-INVESTMENT STAGE THROUGH NEURAL NETWORK TECHNOLOGY

Directory of Open Access Journals (Sweden)

G. D. Kostsikava

2016-01-01

Full Text Available Ever since the Soviet Union design solutions were evaluated according to different criteria and indicators. At the present stage of evaluation systems of design solutions stands systemengineering doctrine is allocated. It is complemented by the theory of efficiency and financial sustainability investment project in view of the general market concept. Also great attention is paid to the virtual object modeling. It is urgent to include the behavior prediction of an investment construction project model at each stage of its life cycle. The high cost of all phases of this life cycle makes it necessary to calculate the feasibility of the investment. Very urgent to do it as accurately as possible and before we start of design works on the stage of the investment plan evaluation. Belarus has legislated pre-investment stage of construction project development. To evaluate the design solution at this stage is necessary to develop an investment justification, a project management plan and a business plan. They will evaluate and will compare several options for future objects by the complex. This requires not only time, but considerable financial costs. In order to optimize the process to develop an evaluation system design solutions based on existing projects. It allows the customer (investor choose design solutions to build the object without developing of pre-design documentations for several options. This system it is advisable to try out the example of apartment house building with the assistance of the national fund of project documentation and objects-analogues data bank. The developed evaluation system of design solutions for residential real estate objects in the pre-investment stage is supposed to use the theory of neural networks and neyroprogramming. This system bases on the input parameters projects. The hidden layer neurons are trained to choose suitable projects of apartment houses with their classification. The projects will be classified

Evaluation Framework EFI for Measuring the Impact of Learning, Education and Training

NARCIS (Netherlands)

Stracke, Christian M.

2016-01-01

This article introduces the Evaluation Framework EFI for the Impact Measurement of learning, education and training: The Evaluation Framework for Impact Measurement was developed for specifying the evaluation phase and its objectives and tasks within the IDEAL Reference Model for the introduction

Evaluation of air quality and noise impact assessments, Davis Canyon

International Nuclear Information System (INIS)

1986-05-01

In this report, several issues are identified regarding the air quality and noise assessments presented in the final salt repository environmental assessment (EA) prepared by the US Department of Energy for the Davis Canyon, Utah, site. Necessary revisions to the data and methods used to develop the EA impact assessment are described. Then, a comparative evaluation is presented in which estimated impacts based upon the revised data and methods are compared with the impacts published in the EA. The evaluation indicates that the conclusions of the EA air quality and noise impact sections would be unchanged. Consequently, the guideline findings presented in Chapter 6 of the EA are also unchanged by the revised analysis. 50 refs., 16 tabs

Evaluating Broader Impacts: Issues and Opportunities (Invited)

Science.gov (United States)

Elthon, D.

2010-12-01

The NSF expects that funded projects will include activities that have intrinsic Intellectual Merit and that promote the Broader Impacts (BI) of this work to those outside the immediate research community. These BI activities take many forms, but often involve collaborations with schools, informal science centers, and media developers in efforts to promote the public understanding of science, encourage a talented and diverse pool of students to pursue careers in science, and illustrate the benefits society derives from scientific discoveries. A critical question is how to evaluate individual BI activities and the overall portfolio of BI activities. What are the metrics for success? How can evaluation results be used to improve the BI portfolio? Evaluation of BI activities is complicated by several factors, including: [1] The scope of BI activities is highly variable across different types of NSF-funded projects. Individual research projects typically have limited BI activities, with only modest funding (facilities typically have dedicated BI/education specialists and formal evaluation expertise. An additional complication is that many BI activities are unique or have novel aspects that reflect the local circumstances and opportunities, but make it difficult to develop broadly-applicable evaluation instruments;[2] There is not consensus on the perspective from which the evaluation should be conducted. Scientists, participants (teachers, students, museum/aquarium personnel), and the funding agencies typically have differing objectives and metrics for BI projects. [3] The timeframe for conducting any evaluation is frequently limited to a few years, placing limitations on the scope of the evaluation effort. Long-term learning, career impacts, and changes in cultural attitudes or perceptions are difficult to assess under this circumstance; [4] Limited financial resources sharply constrain the depth of inquiry for many studies, and, consequently, most BI efforts have not

Evaluation of the Magnesium Hydroxide Treatment Process for Stabilizing PFP Plutonium/Nitric Acid Solutions

Energy Technology Data Exchange (ETDEWEB)

Gerber, Mark A.; Schmidt, Andrew J.; Delegard, Calvin H.; Silvers, Kurt L.; Baker, Aaron B.; Gano, Susan R.; Thornton, Brenda M.

2000-09-28

This document summarizes an evaluation of the magnesium hydroxide [Mg(OH)2] process to be used at the Hanford Plutonium Finishing Plant (PFP) for stabilizing plutonium/nitric acid solutions to meet the goal of stabilizing the plutonium in an oxide form suitable for storage under DOE-STD-3013-99. During the treatment process, nitric acid solutions bearing plutonium nitrate are neutralized with Mg(OH)2 in an air sparge reactor. The resulting slurry, containing plutonium hydroxide, is filtered and calcined. The process evaluation included a literature review and extensive laboratory- and bench-scale testing. The testing was conducted using cerium as a surrogate for plutonium to identify and quantify the effects of key processing variables on processing time (primarily neutralization and filtration time) and calcined product properties.

Impact evaluation of productive use—An implementation guideline for electrification projects

International Nuclear Information System (INIS)

Bensch, Gunther; Peters, Jörg; Schmidt, Christoph M.

2012-01-01

There is a consensus in the international community that rural electrification and, in particular, the productive use of electricity contributes to poverty alleviation. At the same time, efforts to evaluate the impacts of development projects have increased substantially. This paper provides a hands-on guide for designing evaluation studies regarding the impacts of productive electricity usage. Complementary to the existing literature on evaluation methods, this guide familiarizes project managers with the concrete steps that have to be undertaken to plan and implement an evaluation. The guide comprises three modules based on enterprise surveys and on anecdotal case studies. For each module, the implementation is described on a step-by-step basis including conceptual issues as well as logistics and methodological questions. - Highlights: ► Hands-on evaluation guideline for development project managers. ► Step-by-step procedure on how to implement evaluation. ► Impacts of productive electricity use.

MANAGEMENT OF SOLID WASTE GENERATED BY THE INTEGRATED STEELWORKS ACTIVITY AND SOLUTIONS TO REDUCE THE ENVIRONMENTAL IMPACT

Directory of Open Access Journals (Sweden)

Anişoara CIOCAN

2010-05-01

Full Text Available The development of steel industry is subject to solve major problems arising from industry-nature relationship, strictly targeted on pollution control and protection of natural resources and energy. In this paper we discussed about the management of solid waste generated by an integrated steelwork located near a major urban area and the adopted solutions for the reduction of environmental impact. There are summarized technical solutions that are currently applied and were proposed some solutions that can be applied in accordance with the environmental legislations. The new solutions are proposed for integrated management of solid wastes in accordance with: the exact quantification (quantitative, qualitative and the generation sources of emissions and solid wastes; controlled storage; minimization of the wastes and its harmfulness; transformation of the wastes into valuable by-products used directly by the company in a subsequent process, or by external down-stream user.

Evaluation of urban air pollution impact. Brest and Nantes impact at long term; Evaluation de l'impact sanitaire de la pollution atmospherique urbaine. Brest et Nantes impact a long terme

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

The assessment for Brest and Nantes of the health impact in 1999 of chronic exposure to air pollution relies on four stages: health outcome identification, the selection of exposure-response functions, exposure assessment and risk characterization. The study characterizes: - the health gain due to a 25% decrease in air pollution levels; - the expected health impact of a 15% rise in air pollution levels. The results give the number of deaths attributable to air pollution. As for the health gain, the gain in days of life expectancy is also calculated. The study for Brest relies on one single exposure-response function. Concerning Nantes, the air control network is more complete and allows to use four exposure-response functions. The health gain due to a 25% decrease in air pollution levels is interpreted as a prudent evaluation of the health impact of air pollution. The estimated number of deaths due to the impact is around 38 (23 - 53) for Brest and around 40 (14 - 65) for Nantes. It means a decrease in the lifespan of 48 (29 - 68) days for Brest and 51 (17 - 84) days for Nantes. The uncertainty about exposure evaluation, the use of American exposure-response functions and of strong hypotheses to calculate the lifespan reduction generate more errors and uncertainty than for short term health impact assessment. (author)

Evaluating the impacts of packaging policy in The Netherlands

NARCIS (Netherlands)

Rouw, M.; Worrell, E.

2011-01-01

Packaging materials are one of the largest contributors to municipal solid waste production. This paper evaluates the material impacts packaging policy in The Netherlands in the period 1986–2007. Five different voluntary agreements were implemented over this period to reduce the environmental impact

Evaluation of liquid metal embrittlement of stainless steel 304 by cadmium and cadmium-aluminum solutions

International Nuclear Information System (INIS)

Iyer, N.C.; Peacock, H.B.; Thomas, J.K.; Begley, J.A.

1994-01-01

The susceptibility of stainless steel 304 (SS304) to liquid metal embrittlement (LME) by cadmium (Cd) and cadmium-aluminum (Cd-Al) solutions was examined as part of a failure evaluation for SS304-clad cadmium reactor safety rods which had been exposed to elevated temperatures. The safety rod test data and destructive examination of the specimens indicated that LME was not the failure mode. The available literature data also suggest that austenitic stainless steels are not particularly susceptible to LME by Cd or Cd-Al solutions. However, the literature data is not conclusive and an experimental study was therefore conducted to examine the susceptibility of SS304 to LME by Cd and Cd-Al solutions. Temperatures from 325 to 600 C and strain rates from 1x10 -6 to 5x10 -5 s -1 were of interest in this evaluation. Tensile tests carried out in molten Cd-Al and Cd solutions over these temperatures and strain rates with both smooth bar and notched specimens showed no evidence of LME. U-bend tests conducted in liquid Cd at 500 and 600 C also showed no evidence of LME. It is concluded that SS304 is not subject to LME by Cd or Cd-Al solutions over the range of temperatures and strain rates of interest. ((orig.))

Monitoring and evaluating astronomy outreach programmes: Challenges and solutions

Directory of Open Access Journals (Sweden)

Sarah Chapman

2015-05-01

Full Text Available A number of tools exist to guide the monitoring and evaluation of science, technology, engineering and mathematics (STEM education and outreach programmes. Fewer tools exist for evaluating astronomy outreach programmes. In this paper we try to overcome this limitation by presenting a monitoring and evaluation framework developed for the International Astronomical Union's Office of Astronomy for Development (OAD. The mandate of the OAD is to stimulate sustainable development at an international level and to expand astronomy education and outreach globally. The broad assumptions of this programme are that astronomy has the potential to contribute to human development by means of the transferable nature of its science discoveries, as well as its potential to activate feelings of wonderment, inspiration and awareness of the universe. As a result, the programme potentially embodies a far broader mix of outcomes than conventionally considered in STEM evaluation approaches. Towards this aim, we operationalise our monitoring and evaluation approach by first outlining programme theories for three key OAD programmes: a programme for universities and research, another one for schools, and one for public outreach. We then identify outcomes, indicators and measures for each one of these programmes. We conclude with suggestions for evaluating the global impact of astronomy for development.

Distributed Impact Detector System (DIDS) Health Monitoring System Evaluation

Science.gov (United States)

Prosser, William H.; Madaras, Eric I.

2010-01-01

Damage due to impacts from micrometeoroids and orbital debris is one of the most significant on-orbit hazards for spacecraft. Impacts to thermal protection systems must be detected and the damage evaluated to determine if repairs are needed to allow safe re-entry. To address this issue for the International Space Station Program, Langley Research Center and Johnson Space Center technologists have been working to develop and implement advanced methods for detecting impacts and resultant leaks. LaRC funded a Small Business Innovative Research contract to Invocon, Inc. to develop special wireless sensor systems that are compact, light weight, and have long battery lifetimes to enable applications to long duration space structures. These sensor systems are known as distributed impact detection systems (DIDS). In an assessment, the NASA Engineering and Safety Center procured two prototype DIDS sensor units to evaluate their capabilities in laboratory testing and field testing in an ISS Node 1 structural test article. This document contains the findings of the assessment.

Evaluation of air quality and noise impact assessments, Deaf Smith County

International Nuclear Information System (INIS)

1986-05-01

In this report, several issues are identified regarding the air quality and noise impact assessments presented in the final salt repository environmental assessment (EA) prepared by the US Department of Energy for the Deaf Smith County, Texas, site. Necessary revisions to the data and methods used to develop the EA impact assessment are described. Then, a comparative evaluation is presented in which estimated impacts based upon the revised data and methods are compared with the impacts published in the EA. The evaluation indicates that the conclusions of the EA air quality and noise impacts sections would be unchanged. Consequently, the guideline findings presented in Chapter 6 of the EA are also unchanged by the revised analysis. 13 tabs

Which Features of Spanish Learners' Pronunciation Most Impact Listener Evaluations?

Science.gov (United States)

McBride, Kara

2015-01-01

This study explores which features of Spanish as a foreign language (SFL) pronunciation most impact raters' evaluations. Native Spanish speakers (NSSs) from regions with different pronunciation norms were polled: 147 evaluators from northern Mexico and 99 evaluators from central Argentina. These evaluations were contrasted with ratings from…

Evaluation of the stability of linezolid in aqueous solution and commonly used intravenous fluids

Directory of Open Access Journals (Sweden)

Taylor R

2017-07-01

Full Text Available Rachel Taylor, Bruce Sunderland, Giuseppe Luna, Petra Czarniak School of Pharmacy, Faculty of Health Sciences, Curtin University, Bentley, WA, Australia Purpose: The aim was to evaluate the stability of linezolid in commonly used intravenous fluids and in aqueous solution to determine the kinetics of degradation and shelf-life values at alkaline pH values. Methods: Forced degradation studies were performed on linezolid in solution to develop a validated high-performance liquid chromatography analysis. Sodium chloride 0.9%, sodium lactate, and glucose 5% and glucose 10% solution containing 2.0 mg/mL linezolid were stored at 25.0°C (±0.1°C for 34 days. The effect of temperature on the stability of linezolid in 0.1 M sodium hydroxide solution was investigated to determine the activation energy. The degradation rates of linezolid at selected pH values at 70.0°C and the influence of ionic strength were also examined. Activation energy data were applied to determine the shelf-life values at selected pH values, and a pH rate profile was constructed over the pH range of 8.7–11.4. The stability of intravenous linezolid (Zyvox® solution was evaluated by storing at 70.0°C for 72 hours. Results: Linezolid was found to maintain >95.0% of its initial concentration after storage at 25.0°C for 34 days in sodium lactate, 0.9% in sodium chloride, and 5% and 10% in glucose solutions. Linezolid was degraded at alkaline pH values by first-order kinetics. Activation energy data showed that temperature, but not ionic strength, influenced the degradation rate significantly. An activation energy of 58.22 kJ/mol was determined for linezolid in 0.1 M sodium hydroxide solution. Linezolid was least stable at high pH values and at elevated temperatures. It was determined that linezolid has adequate stability for the preparation of intravenous fluids for clinical administration. Conclusion: Linezolid was found to have a shelf life of 34 days at 25°C when added to

Investigation of Mechanical Properties and Fracture Simulation of Solution-Treated AA 5754

Science.gov (United States)

Kumar, Pankaj; Singh, Akhilendra

2017-10-01

In this work, mechanical properties and fracture toughness of as-received and solution-treated aluminum alloy 5754 (AA 5754) are experimentally evaluated. Solution heat treatment of the alloy is performed at 530 °C for 2 h, and then, quenching is done in water. Yield strength, ultimate tensile strength, impact toughness, hardness, fatigue life, brittle fracture toughness (K_{Ic} ) and ductile fracture toughness (J_{Ic} ) are evaluated for as-received and solution-treated alloy. Extended finite element method has been used for the simulation of tensile and fracture behavior of material. Heaviside function and asymptotic crack tip enrichment functions are used for modelling of the crack in the geometry. Ramberg-Osgood material model coupled with fracture energy is used to simulate the crack propagation. Fracture surfaces obtained from various mechanical tests are characterized by scanning electron microscopy.

Evaluation of baobab (gonglase) solution for home management of diarrhoea in sudanese children

International Nuclear Information System (INIS)

Abdel Galil, Nour Elhuda

1996-06-01

A randomized controlled study was carried out in Khartoum North during the year 1994-1995 at Ahmed Gasim children teaching hospital, khatmia, and shabia health centres to evaluate acceptability, safety and efficiency of three formulated baobab home oral rehydration solutions in children with diarrhoeal diseases. 113 children 6-60 months of age were enrolled in the study with mild or no dehydration and without associated diseases. Three baobab solutions were administered beside the control WHO/oral rehydration solution (ORS). 32 were allocated to solution A (baobab pulp extract+home sugar), 35 patients to solution B (baobab pulp extract+domestic salt+sugar), 25 to solution C (baobab pulp extract+WHO/ORS) and 21 to the control solution (WHO/ORS). The solutions were administered for three successive days to the children with diarrhoea. A questionnaire was filled for each child including attitudes and practices of mother regarding diarrhoeal diseases, socioeconomic status of parents, history of the patient health and past nutritional intake during the present diarrhoea. The clinical data were studied. The study showed that the solutions were acceptable, effective and safer than the control. The three solutions A, B and C were good as therapeutic solutions and exceeded that of the WHO/ORS. Clinical data demonstrated that after 24 hours of management of the diarrhoeal diseases with baobab solutions, the recovery rate was 60% for solution A group, 20% for solution B group and 28% for solution C where as the recovery rate for solution D was 5%. By the second 24 hours of management the cumulative recovery rate was 100% for A, 77% for B, 84% for C and 24% for D. None was considered a treatment failure or developed dehydration and all the patients were satisfactorily treated with marked effect on children with diarrhoea , specially bloody diarrhoea. The molar concentration of K in the baobab solution was 21 mmol/litre very close to the molar concentration of K in the WHO

Evaluation of adsorption of uranium from aqueous solution using biochar materials

Energy Technology Data Exchange (ETDEWEB)

Correa, Wagner Clayton; Guilhen, Sabine Neusatz; Ortiz, Nilce; Fungaro, Denise Alves, E-mail: wcorrea@ipen.br, E-mail: snguilhen@ipen.br, E-mail: notriz@ipen.br, E-mail: dfungaro@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2015-07-01

Uranium is present in the environment as a result of leaching from natural deposits and activities associated with nuclear fuel, copper mining, uranium mining, milling industry, etc. For the purpose of protecting ecosystem stability and public health, it is crucial to eliminate uranium from aqueous solutions before they are discharged into the environment. Various technologies have been used for removing U(VI) ions from aqueous systems. Among these methods, adsorption has been applied in wastewater because of simple operation procedure and high removal efficiency. Brazil is the largest producer of charcoal in the world, with nearly half of the woody biomass harvested for energy in Brazil being transformed into charcoal. Biochar exhibits a great potential as an adsorbent because of favorable physical/chemical surface characteristics. The objective of this work was to evaluate the adsorption potential of biochar materials prepared from pyrolysis of Bamboo (CBM), Eucalyptus (CEM) and Macauba (CMA) nuts for the removal of uranium from solutions. Adsorption experiments were carried out by a batch technique. Equilibrium adsorption experiments were performed by shaking a known amount of biochar material with 100 mL of U(VI) solution in Erlenmeyer flasks in a shaker at 120 rpm and room temperature (25 deg C) for 24 h. The adsorbent was separated by centrifugation from the solution. The U(VI) concentration remaining in the supernatant solution was determined using inductively coupled plasma optical emission spectrometry (ICP-OES). The influences of different experimental parameters such as solution pH and bioadsorbent dose on adsorption were investigated. The highest uranium adsorption capacity were obtained at pH 3.0 and 16 g/L biomass dosage for CMA, pH 3.0 and 12 g/L biomass dosage for CBM and pH 2.0 and 10 g/L biomass dosage for CEM. The results demonstrated that the biomass derived char can be used as a low-cost adsorbent for removal of uranium from wastewater. (author)

Evaluation of adsorption of uranium from aqueous solution using biochar materials

International Nuclear Information System (INIS)

Correa, Wagner Clayton; Guilhen, Sabine Neusatz; Ortiz, Nilce; Fungaro, Denise Alves

2015-01-01

Uranium is present in the environment as a result of leaching from natural deposits and activities associated with nuclear fuel, copper mining, uranium mining, milling industry, etc. For the purpose of protecting ecosystem stability and public health, it is crucial to eliminate uranium from aqueous solutions before they are discharged into the environment. Various technologies have been used for removing U(VI) ions from aqueous systems. Among these methods, adsorption has been applied in wastewater because of simple operation procedure and high removal efficiency. Brazil is the largest producer of charcoal in the world, with nearly half of the woody biomass harvested for energy in Brazil being transformed into charcoal. Biochar exhibits a great potential as an adsorbent because of favorable physical/chemical surface characteristics. The objective of this work was to evaluate the adsorption potential of biochar materials prepared from pyrolysis of Bamboo (CBM), Eucalyptus (CEM) and Macauba (CMA) nuts for the removal of uranium from solutions. Adsorption experiments were carried out by a batch technique. Equilibrium adsorption experiments were performed by shaking a known amount of biochar material with 100 mL of U(VI) solution in Erlenmeyer flasks in a shaker at 120 rpm and room temperature (25 deg C) for 24 h. The adsorbent was separated by centrifugation from the solution. The U(VI) concentration remaining in the supernatant solution was determined using inductively coupled plasma optical emission spectrometry (ICP-OES). The influences of different experimental parameters such as solution pH and bioadsorbent dose on adsorption were investigated. The highest uranium adsorption capacity were obtained at pH 3.0 and 16 g/L biomass dosage for CMA, pH 3.0 and 12 g/L biomass dosage for CBM and pH 2.0 and 10 g/L biomass dosage for CEM. The results demonstrated that the biomass derived char can be used as a low-cost adsorbent for removal of uranium from wastewater. (author)

Parking taxes : evaluating options and impacts

International Nuclear Information System (INIS)

Litman, T.A.

2006-01-01

In addition to encouraging the use of alternative modes of transport, parking taxes can help to reduce congestion, air pollution, and urban sprawl. Various types of parking taxes were evaluated in this paper, as well as their impacts on parking supply, prices and travel patterns. Examples of various parking tax programs in major cities in Canada, Europe, the United States and Australia were presented. Parking tax programs were divided into 2 main categories: (1) per-space parking levies which distribute cost burdens and encourage property owners to manage parking supply more efficiently and (2) commercial parking taxes on parking rental transactions which discourage the pricing of parking and concentrate impacts in limited areas. Worksite parking levies were discussed, as well stormwater fees and employee parking as a taxable benefit. Typical parking facility financial costs were reviewed and best practices for structuring and implementing parking taxes to increase public acceptability were outlined. It was suggested that the tax base should be broad and well-defined. Local governments should increase parking prices to market rates before imposing special parking taxes, and taxes and fees should be structured to avoid undesirable land use. Parking tax reforms should be part of an overall parking and mobility management program. Stakeholders should be consulted to insure that regulations, administrative procedures and enforcement policies are efficient and fair. The establishment of an evaluation program to determine tax impacts on parking supply and pricing, economic activity, traffic and spillover problems was also recommended. 42 refs., 4 tabs., 1 fig

An evaluation on environment radiation impact of pulsed reactor

International Nuclear Information System (INIS)

Gao Yingwei; Pu Gongxu; Li Jian

1991-01-01

The dose regulation, assessment scope and assessment method adopted by the environment impact evaluation for the pulsed reactor are discussed. The compute model, the compute programme and the compute result of the dose adopted for the model pulsed reactor are introduced. The probable environment radiation impact under normal status and accident status are also appraised

Evaluations of cellulose accessibilities of lignocelluloses by solute exclusion and protein adsorption techniques

Science.gov (United States)

Q.Q. Wang; Z. He; Z. Zhu; Y.-H.P. Zhang; Y. Ni; X.L. Luo; J.Y. Zhu

2012-01-01

Cellulose accessibilities of a set of hornified lignocellulosic substrates derived by drying the never dried pretreated sample and a set of differently pretreated lodgepople pine substrates, were evaluated using solute exclusion and protein adsorption methods. Direct measurements of cellulase adsorption onto cellulose surface of the set of pretreated substrates were...

A holistic model for evaluating the impact of individual technology-enhanced learning resources.

Science.gov (United States)

Pickering, James D; Joynes, Viktoria C T

2016-12-01

The use of technology within education has now crossed the Rubicon; student expectations, the increasing availability of both hardware and software and the push to fully blended learning environments mean that educational institutions cannot afford to turn their backs on technology-enhanced learning (TEL). The ability to meaningfully evaluate the impact of TEL resources nevertheless remains problematic. This paper aims to establish a robust means of evaluating individual resources and meaningfully measure their impact upon learning within the context of the program in which they are used. Based upon the experience of developing and evaluating a range of mobile and desktop based TEL resources, this paper outlines a new four-stage evaluation process, taking into account learner satisfaction, learner gain, and the impact of a resource on both the individual and the institution in which it has been adapted. A new multi-level model of TEL resource evaluation is proposed, which includes a preliminary evaluation of need, learner satisfaction and gain, learner impact and institutional impact. Each of these levels are discussed in detail, and in relation to existing TEL evaluation frameworks. This paper details a holistic, meaningful evaluation model for individual TEL resources within the specific context in which they are used. It is proposed that this model is adopted to ensure that TEL resources are evaluated in a more meaningful and robust manner than is currently undertaken.

Evaluation of the amorphous content of lactose by solution calorimetry and Raman spectroscopy.

Science.gov (United States)

Katainen, Erja; Niemelä, Pentti; Harjunen, Päivi; Suhonen, Janne; Järvinen, Kristiina

2005-11-15

Solution calorimetry can be used to determine the amorphous content of a compound when the solubility and dissolution rate of the compound in the chosen solvent are reasonably high. Sometimes, it can be difficult find a solvent in which a sample is freely soluble. The present study evaluated the use of solution calorimetry for the assessment of the amorphous content of a sample that is poorly soluble in a solvent. Physical mixtures of lactose and spray-dried lactose samples (the amorphous content varied from 0 to 100%) were analyzed by a solution calorimeter and the results were compared with Raman spectroscopy determinations. The heat of solvation of the samples was determined by solution calorimetry in organic solvents MeOH, EtOH, ACN, THF, acetone (400mg sample/100ml solvent). Lactose is virtually insoluble in ACN, THF and acetone and very slightly soluble in EtOH and MeOH. The amorphous content of the samples could not be determined by solution calorimetry in EtOH, ACN, THF or acetone. However, an excellent correlation was observed between the heat of solvation and the amorphous content of the samples in MeOH. Furthermore, the heat of solvation values of the samples in MeOH showed a linear correlation with the Raman quantifications. Therefore, our results demonstrate that solution calorimetry may represent a rapid and simple method for determining the amorphous content also in samples that are not freely soluble in the solvent.

Antimicrobial action of sodium hypochlorite and castor oil solutions for denture cleaning – in vitro evaluation

Directory of Open Access Journals (Sweden)

Marcela Moreira SALLES

2015-01-01

Full Text Available The objective of this in vitro study was to evaluate the antimicrobial action of sodium hypochlorite (0.25% and 0.50% and 10% castor oil solutions against specific microorganisms, by counting Colony Forming Units (CFU of clinically important bacteria and Candida species. Acrylic resin specimens (n = 320; Lucitone 550 were obtained from square metal matrices (10 x 10 x 2 mm, sterilized by microwave (650W, for 6 minutes and contaminated by Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans, Bacillus subtilis, Escherichia coli, Streptococcus mutans, Enterococcus faecalisand Candida glabrata. The specimens were immersed for 20 minutes in one of the following hygiene solutions (n = 10/each: A – 0.25% Sodium hypochlorite; B – 0.5% Sodium hypochlorite; C – 10% Castor oil solution; and D (Control – saline. Adhered cells were suspended and inoculated into a selective solid medium (37ºC for 24 h. The Student’s t-test (α = 0.05 was performed to compare log10(CFU+1/mL between Groups C and D. The results showed that sodium hypochlorite (0.25% and 0.5% completely eliminated all detectable microorganisms. The castor oil solution eliminatedB. subtilisand reduced counts for other strains. Differences between C and D were significant (p E. faecalis. Both sodium hypochlorite solutions (0.25% and 0.5% were effective in eliminating all microorganisms evaluated, and may be useful as cleaning solutions for complete dentures. The castor oil solution provided moderate efficacy and performed differently on the tested species, with the strongest effect on B. subtilis and with non-significant action on E. faecalis.

Can the impact of public involvement on research be evaluated? A mixed methods study

Science.gov (United States)

Barber, Rosemary; Boote, Jonathan D; Parry, Glenys D; Cooper, Cindy L; Yeeles, Philippa; Cook, Sarah

2011-01-01

Abstract Background  Public involvement is central to health and social research policies, yet few systematic evaluations of its impact have been carried out, raising questions about the feasibility of evaluating the impact of public involvement. Objective  To investigate whether it is feasible to evaluate the impact of public involvement on health and social research. Methods  Mixed methods including a two‐round Delphi study with pre‐specified 80% consensus criterion, with follow‐up interviews. UK and international panellists came from different settings, including universities, health and social care institutions and charitable organizations. They comprised researchers, members of the public, research managers, commissioners and policy makers, self‐selected as having knowledge and/or experience of public involvement in health and/or social research; 124 completed both rounds of the Delphi process. A purposive sample of 14 panellists was interviewed. Results  Consensus was reached that it is feasible to evaluate the impact of public involvement on 5 of 16 impact issues: identifying and prioritizing research topics, disseminating research findings and on key stakeholders. Qualitative analysis revealed the complexities of evaluating a process that is subjective and socially constructed. While many panellists believed that it is morally right to involve the public in research, they also considered that it is appropriate to evaluate the impact of public involvement. Conclusions  This study found consensus among panellists that it is feasible to evaluate the impact of public involvement on some research processes, outcomes and on key stakeholders. The value of public involvement and the importance of evaluating its impact were endorsed. PMID:21324054

Can the impact of public involvement on research be evaluated? A mixed methods study.

Science.gov (United States)

Barber, Rosemary; Boote, Jonathan D; Parry, Glenys D; Cooper, Cindy L; Yeeles, Philippa; Cook, Sarah

2012-09-01

  Public involvement is central to health and social research policies, yet few systematic evaluations of its impact have been carried out, raising questions about the feasibility of evaluating the impact of public involvement.   To investigate whether it is feasible to evaluate the impact of public involvement on health and social research.   Mixed methods including a two-round Delphi study with pre-specified 80% consensus criterion, with follow-up interviews. UK and international panellists came from different settings, including universities, health and social care institutions and charitable organizations. They comprised researchers, members of the public, research managers, commissioners and policy makers, self-selected as having knowledge and/or experience of public involvement in health and/or social research; 124 completed both rounds of the Delphi process. A purposive sample of 14 panellists was interviewed.   Consensus was reached that it is feasible to evaluate the impact of public involvement on 5 of 16 impact issues: identifying and prioritizing research topics, disseminating research findings and on key stakeholders. Qualitative analysis revealed the complexities of evaluating a process that is subjective and socially constructed. While many panellists believed that it is morally right to involve the public in research, they also considered that it is appropriate to evaluate the impact of public involvement.   This study found consensus among panellists that it is feasible to evaluate the impact of public involvement on some research processes, outcomes and on key stakeholders. The value of public involvement and the importance of evaluating its impact were endorsed. © 2011 Blackwell Publishing Ltd.

Evaluation of baobab (gonglase) solution for home management of diarrhoea in sudanese children

Energy Technology Data Exchange (ETDEWEB)

Abdel Galil, Nour Elhuda [Department of Biochemistry and Soil Science, Faculty of Agriculture, University of Khartoum, Khartoum (Sudan)

1996-06-01

A randomized controlled study was carried out in Khartoum North during the year 1994-1995 at Ahmed Gasim children teaching hospital, khatmia, and shabia health centres to evaluate acceptability, safety and efficiency of three formulated baobab home oral rehydration solutions in children with diarrhoeal diseases. 113 children 6-60 months of age were enrolled in the study with mild or no dehydration and without associated diseases. Three baobab solutions were administered beside the control WHO/oral rehydration solution (ORS). 32 were allocated to solution A (baobab pulp extract+home sugar), 35 patients to solution B (baobab pulp extract+domestic salt+sugar), 25 to solution C (baobab pulp extract+WHO/ORS) and 21 to the control solution (WHO/ORS). The solutions were administered for three successive days to the children with diarrhoea. A questionnaire was filled for each child including attitudes and practices of mother regarding diarrhoeal diseases, socioeconomic status of parents, history of the patient health and past nutritional intake during the present diarrhoea. The clinical data were studied. The study showed that the solutions were acceptable, effective and safer than the control. The three solutions A, B and C were good as therapeutic solutions and exceeded that of the WHO/ORS. Clinical data demonstrated that after 24 hours of management of the diarrhoeal diseases with baobab solutions, the recovery rate was 60% for solution A group, 20% for solution B group and 28% for solution C where as the recovery rate for solution D was 5%. By the second 24 hours of management the cumulative recovery rate was 100% for A, 77% for B, 84% for C and 24% for D. None was considered a treatment failure or developed dehydration and all the patients were satisfactorily treated with marked effect on children with diarrhoea , specially bloody diarrhoea. The molar concentration of K in the baobab solution was 21 mmol/litre very close to the molar concentration of K in the WHO

Electrodialysis potential for fractionation of multicomponent aqueous solutions

Science.gov (United States)

Grzegorzek, Martyna; Majewska-Nowak, Katarzyna

2017-11-01

The paper aimed at the evaluation of the batch electrodialysis (ED) run in the course of treatment and desalination of various aqueous mixtures containing both mineral (sodium fluoride, sodium chloride) and organic substances (dyes or humic acids). The commercial ED stack (PCCell Bed) equipped with standard anion-exchange and cation-exchange membranes or monovalent selective anion-exchange membranes was used. The ED experiments were performed at a constant current density (1.56 or 1.72 mA/cm2). The mechanism of ion migration as well as membrane deposition for variable solution composition and various membrane types was analyzed The calculated mass balance and electrical energy demand for each ED run were helpful in evaluating the membrane fouling intensity. It was found that the presence of organic substances in the treated solution had a minor impact on energy consumption, but rather strongly affected chloride flux. The extent of organics deposition was significantly lower for monovalent selective anion-exchange membranes than for classic anion-exchange membranes.

Evaluation of Monticello Nuclear Power Plant, Environmental Impact Prediction, based on monitoring programs

International Nuclear Information System (INIS)

Gore, K.L.; Thomas, J.M.; Kannberg, L.D.; Watson, D.G.

1976-11-01

This report evaluates quantitatively the nonradiological environmental monitoring programs at Monticello Nuclear Generating Plant. The general objective of the study is to assess the effectiveness of monitoring programs in the measurement of environmental impacts. Specific objectives include the following: (1) Assess the validity of environmental impact predictions made in the Environmental Statement by analysis of nonradiological monitoring data; (2) evaluate the general adequacy of environmental monitoring programs for detecting impacts and their responsiveness to Technical Specifications objectives; (3) assess the adequacy of preoperational monitoring programs in providing a sufficient data base for evaluating operational impacts; (4) identify possible impacts that were not predicted in the environmental statement and identify monitoring activities that need to be added, modified or deleted; and (5) assist in identifying environmental impacts, monitoring methods, and measurement problems that need additional research before quantitative predictions can be attempted. Preoperational as well as operational monitoring data were examined to test the usefulness of baseline information in evaluating impacts. This included an examination of the analytical methods used to measure ecological and physical parameters, and an assessment of sampling periodicity and sensitivity where appropriate data were available

Blood gas analysis, anion gap, and strong ion difference in horses treated with polyethylene glycol balanced solution (PEG 3350 or enteral and parenteral electrolyte solutions

Directory of Open Access Journals (Sweden)

Cláudio Luís Nina Gomes

2014-06-01

Full Text Available Large volumes of different electrolytes solutions are commonly used for ingesta hydration in horses with large colon impaction, but little is known about their consequences to blood acid-base balance. To evaluate the effects of PEG 3350 or enteral and parenteral electrolyte solutions on the blood gas analysis, anion gap and strong ion difference, five adult female horses were used in a 5x5 latin square design. The animals were divided in five groups and distributed to each of the following treatments: NaCl (0.9% sodium chloride solution; EES (enteral electrolyte solution, EES+LR (EES plus lactated Ringer's solution; PEG (balanced solution with PEG 3350 and PEG+LR (PEG plus lactated Ringer's solution. Treatments PEG or PEG + LR did not change or promoted minimal changes, while the EES caused a slight decrease in pH, but its association with lactated Ringer's solution induced increase in AG and SID values, as well as caused hypernatremia. In turn, the treatment NaCl generated metabolic acidosis. PEG 3350 did not alter the acid-base balance. Despite it's slight acidifying effect, the enteral electrolyte solution (EES did not cause clinically relevant changes.

Rapid evaluation of buildings and infrastructure to accidental and deliberate aircraft impact

International Nuclear Information System (INIS)

Tennant, D.; Levine, H.; Mould, J.; Vaughan, D.

2014-01-01

Recent events involving the impact of large transport aircraft such as the Boeing 767 and 757 into the World Trade Center Towers and the Pentagon have revealed the vulnerability of such structures to terrorist attack. Incidents involving smaller general aviation aircraft have shown the damage that this class of plane can do beyond a protected perimeter. These incidents have elicited inquiries with regard to the effects of impacts of these aircraft types into other critical facilities including aboveground and below ground storage facilities, nuclear power plants, damns and other military and civilian installations. A significant capability to evaluate these threats has been developed during the past 10 years. Small medium and large aircraft have been impacted into buried and aboveground reinforced concrete and light steel frame storage facilities. Both explicit aircraft models and Riera functions (a simplified aircraft impact loading function) have been used to generate an extensive data base. The effects of engines impacting have been studied separately as penetrators. Illustrated in this paper is validation of computational tools for impacts into structures and the initial development of a generalized evaluation tool for rapid evaluation of threats and consequence of aircraft impact into protected facilities

Rapid evaluation of buildings and infrastructure to accidental and deliberate aircraft impact

Energy Technology Data Exchange (ETDEWEB)

Tennant, D., E-mail: tennant@wai.com [Weidlinger Associates, Inc., 6301 Indian School Road NE, Suite 501, Albuquerque, NM 87122 (United States); Levine, H., E-mail: levine@ca.wai.com [Weidlinger Associates, Inc., 399 W. El Camino Real, Suite 200, Mountain View, CA 94040 (United States); Mould, J.; Vaughan, D. [Weidlinger Associates, Inc., 399 W. El Camino Real, Suite 200, Mountain View, CA 94040 (United States)

2014-04-01

Recent events involving the impact of large transport aircraft such as the Boeing 767 and 757 into the World Trade Center Towers and the Pentagon have revealed the vulnerability of such structures to terrorist attack. Incidents involving smaller general aviation aircraft have shown the damage that this class of plane can do beyond a protected perimeter. These incidents have elicited inquiries with regard to the effects of impacts of these aircraft types into other critical facilities including aboveground and below ground storage facilities, nuclear power plants, damns and other military and civilian installations. A significant capability to evaluate these threats has been developed during the past 10 years. Small medium and large aircraft have been impacted into buried and aboveground reinforced concrete and light steel frame storage facilities. Both explicit aircraft models and Riera functions (a simplified aircraft impact loading function) have been used to generate an extensive data base. The effects of engines impacting have been studied separately as penetrators. Illustrated in this paper is validation of computational tools for impacts into structures and the initial development of a generalized evaluation tool for rapid evaluation of threats and consequence of aircraft impact into protected facilities.

Evaluating the Impact of Cooperative Extension Outreach via Twitter

Science.gov (United States)

O'Neill, Barbara

2014-01-01

Twitter is increasingly being used by Extension educators as a teaching and program-marketing tool. It is not enough, however, to simply use Twitter to disseminate information. Steps must be taken to evaluate program impact with quantitative and qualitative data. This article described the following Twitter evaluation metrics: unique hashtags,…

A Comprehensive Strategy to Evaluate Compatible Stability of Chinese Medicine Injection and Infusion Solutions Based on Chemical Analysis and Bioactivity Assay.

Science.gov (United States)

Li, Jian-Ping; Liu, Yang; Guo, Jian-Ming; Shang, Er-Xin; Zhu, Zhen-Hua; Zhu, Kevin Y; Tang, Yu-Ping; Zhao, Bu-Chang; Tang, Zhi-Shu; Duan, Jin-Ao

2017-01-01

Stability of traditional Chinese medicine injection (TCMI) is an important issue related with its clinical application. TCMI is composed of multi-components, therefore, when evaluating TCMI stability, several marker compounds cannot represent global components or biological activities of TCMI. Till now, when evaluating TCMI stability, method involving the global components or biological activities has not been reported. In this paper, we established a comprehensive strategy composed of three different methods to evaluate the chemical and biological stability of a typical TCMI, Danhong injection (DHI). UHPLC-TQ/MS was used to analyze the stability of marker compounds (SaA, SaB, RA, DSS, PA, CA, and SG) in DHI, UHPLC-QTOF/MS was used to analyze the stability of global components (MW 80-1000 Da) in DHI, and cell based antioxidant capability assay was used to evaluate the bioactivity of DHI. We applied this strategy to assess the compatible stability of DHI and six infusion solutions (GS, NS, GNS, FI, XI, and DGI), which were commonly used in combination with DHI in clinic. GS was the best infusion solution for DHI, and DGI was the worst one based on marker compounds analysis. Based on global components analysis, XI and DGI were the worst infusion solutions for DHI. And based on bioactivity assay, GS was the best infusion solution for DHI, and XI was the worst one. In conclusion, as evaluated by the established comprehensive strategy, GS was the best infusion solution, however, XI and DGI were the worst infusion solutions for DHI. In the compatibility of DHI and XI or DGI, salvianolic acids in DHI would be degraded, resulting in the reduction of original composition and generation of new components, and leading to the changes of biological activities. This is the essence of instability compatibility of DHI and some infusion solutions. Our study provided references for choosing the reasonable infusion solutions for DHI, which could contribute the improvement of safety

Evaluation of secondary environmental impacts of urban runoff pollution control

International Nuclear Information System (INIS)

Huibregtse, K.R.; Geinopolos, A.

1982-03-01

A generalized evaluation of the impacts associated with different urban stormwater runoff (UR) treatment techniques is presented. It addresses the definition of the problem, estimates the volume and characteristics of the UR and the sludges expected, evaluates six methods of UR sludge treatment, and examines alternatives and impacts for UR treatment sludge handling such as bleed/pump back to the dry weather plant, and land disposal. Regarding bleed/pump back of UR sludges, solids deposition in sewers and overload to the dry weather facilities are anticipated to cause problems. The most cost effective sludge treatment alternative appeared to be lime stabilization followed by thickening, pressure filter dewatering, and landfill disposal. Secondary impacts included costs, water quality, noise, energy consumption, air pollution, and land area requirements

Evaluating the impact of investments in information technology on structural inertia in health organizations.

Science.gov (United States)

Bewley, Lee W

2010-01-01

Structural inertia is the overall capacity of an organization to adapt within a market environment. This paper reviews the impact of healthcare investments in information management/information technology (IM/IT) on the strategic management concept of structural inertia. Research indicates that healthcare executives should consider the relative state of structural inertia for their firms and match them with potential IM/IT solutions. Additionally, organizations should favorably consider IM/IT solutions that are comparatively less complex.

Two-dimensional finite element solution for the simultaneous transport of water and solutes through a nonhomogeneous aquifer under transient saturated unsaturated flow conditions

International Nuclear Information System (INIS)

Gureghian, A.B.

1979-01-01

A mathematical model of ground water transport through an aquifer is presented. The solute of interest is a metal tracer or radioactive material which may undergo decay through a sorbing unconfined aquifer. The subject is developed under the following headings: flow equation, solute equation, boundary conditions, finite element formulation, element formulation, solution scheme (flow equation, solute equation), results and discussions, water movement in a ditch drained aquifer under transient state, water and solute movement in a homogeneous and unsaturated soil, transport of 226 Ra in nonhomogeneous aquifer, tailings pond lined, and tailings pond unlined. It is concluded that this mathematical model may have a wide variety of applications. The uranium milling industry may find it useful to evaluate the hydrogeological suitability of their disposal sites. It may prove suited for the design of clay disposal ponds destined to hold hazardous liquids. It may also provide a means of estimating the long-term impact of radionuclides or other pollutants on the quality of ground water. 31 references, 9 figures, 3 tables

Structural failure modes in vertical tanks: reinforcement evaluation and solutions

International Nuclear Information System (INIS)

Alcantud Abellan, M.; Orden Martinez, A.

1995-01-01

Vertical storage tanks are essential components in the safety of nuclear plant systems. It has been shown that the traditional method of analysing seismic loads is not conservative, as it does not take account of the interaction between fluid and tank structure. This paper identifies different possible structural failure modes in tanks due to seismic load, and methods devised by various authors to evaluate tank structure capacity under different failure modes. These methods are based on experimental data relating to the structural behaviour of tanks during actual seismic events, tests, and theoretical analyses. The paper describes the problems of these structures under seismic loads in nuclear plants. It proposes solutions to the main structural problem, tank anchorage, for which the re-evaluation of the anchorage capacity is required, using methods (finite element) less conservative than those proposed by other authors. Also proposed is the local reinforcement of anchorages to increase their capacity. (Author) 4 refs

Evaluation of environmental impact predictions

International Nuclear Information System (INIS)

Cunningham, P.A.; Adams, S.M.; Kumar, K.D.

1977-01-01

An analysis and evaluation of the ecological monitoring program at the Surry Nuclear Power Plant showed that predictions of potential environmental impact made in the Final Environmental Statement (FES), which were based on generally accepted ecological principles, were not completely substantiated by environmental monitoring data. The Surry Nuclear Power Plant (Units 1 and 2) was chosen for study because of the facility's relatively continuous operating history and the availability of environmental data adequate for analysis. Preoperational and operational fish monitoring data were used to assess the validity of the FES prediction that fish would congregate in the thermal plume during winter months and would avoid the plume during summer months. Analysis of monitoring data showed that fish catch per unit effort (CPE) was generally high in the thermal plume during winter months; however, the highest fish catches occurred in the plume during the summer. Possible explanations for differences between the FES prediction and results observed in analysis of monitoring data are discussed, and general recommendations are outlined for improving impact assessment predictions

Impact evaluation in multicultural educational projects : case: ADAPTYKES project

OpenAIRE

Kuusisto, Miika

2014-01-01

The objective of this thesis was to examine the common evaluation concepts of the European Union’s funded projects. Such concepts inter alia are effectiveness, impacts and sustainability. The aim was to study how these are realized in multicultural educational case–project in a context, where the project is funded by the European Commission’s Leonardo DaVinci Programme. Thesis introduces two evaluation approaches, which are Logical Framework Approach and Realistic evaluation model. The fi...

Experimental evaluation of ammonia adiabatic absorption into ammonia–lithium nitrate solution using a fog jet nozzle

International Nuclear Information System (INIS)

Zacarías, Alejandro; Venegas, María; Lecuona, Antonio; Ventas, Rubén

2013-01-01

This paper presents the experimental assessment of the adiabatic absorption of ammonia vapour into an ammonia–lithium nitrate solution using a fog jet nozzle. The ammonia mass fraction was kept constant at 46.08% and the absorber pressure was varied in the range 355–411 kPa. The nozzle was located at the top of the absorption chamber, at a height of 205 mm measured from the bottom surface. The diluted solution flow rate was modified between 0.04 and 0.08 kg s −1 and the solution inlet temperature in the range 25.9–30.2 °C. The influence of these variables on the approach to adiabatic equilibrium factor, outlet subcooling, absorption ratio and mass transfer coefficient is analysed. The approach to adiabatic equilibrium factor for the conditions essayed is always between 0.82 and 0.93. Pressure drop of the solution entering the absorption chamber is also evaluated. Correlations for the approach to adiabatic equilibrium factor and the Sherwood number are given. - Highlights: ► Adiabatic absorption of NH 3 vapour into NH 3 –LiNO 3 using fog jet nozzle created spray. ► Pressure drop of the solution entering to the absorption chamber is evaluated. ► Approach to adiabatic equilibrium factor (F) is between 0.82 and 0.93 at 205 mm height. ► Experimental values of mass transfer coefficient and outlet subcooling are presented. ► Correlations for F and Sherwood number are given.

Measuring and Analyzing the Scholarly Impact of Experimental Evaluation Initiatives

DEFF Research Database (Denmark)

Angelini, Marco; Ferro, Nicola; Larsen, Birger

2014-01-01

Evaluation initiatives have been widely credited with contributing highly to the development and advancement of information access systems, by providing a sustainable platform for conducting the very demanding activity of comparable experimental evaluation in a large scale. Measuring the impact...

Evaluating the impact of agricultural extension programmes in sub-Saharan Africa: Challenges and prospects

OpenAIRE

Hailemichael Taye

2013-01-01

Background: In sub-Saharan Africa (SSA), impact evaluation has been used to assess whether agricultural extension interventions have brought the intended result or to establish causal linkages between interventions and outcomes. However, there is some scepticism about the validity and reliability of the results of the impact evaluation reports due to some contradictory and exaggerated results. Objectives: This article analyses some impact evaluation studies conducted in SSA as to why cont...

Impact of Climate Change on Rain-fed Farming and Response Solutions in Semiarid Area of Northwest China

Directory of Open Access Journals (Sweden)

WANG Hong-li

2015-12-01

Full Text Available The impact of climate change on the agriculture production in semi-arid areas of Northwest, the major drought-resistant technology, the mechanism of increasing grain production were analyzed to explore technical solutions to retort the future climate change, future development of rainfed agriculture, and provide reference for food security. The results showed that the impact of future climate change on crop growth had main three aspects: Firstly, higher temperatures resulted in lower crop yield and quality decline; Secondly, changes in precipitation and precipitation patterns resulted in drought/flooding problems; Thirdly, meteorological disasters caused by extreme weather lead to fluctuations of food production. To adapt or mitigate these adverse effects, increase use efficiency of limited rainfall, optimize soil structure, improve soil fertility, enhance withstanding environmental change ability of crop-soil system, mitigate the impact of future climate change on food production in semi-arid region of Northwest China, the mainly solutions were: (1 Covering gathered precipitation, improve the ability to accumulate soil moisture, change the distribution of soil moisture, regulate the migration and improve the infiltration of precipitation, thus “adjusting water” to adapt to precipitation changes; (2 Optimizing soil structure, physical and chemical properties by soil fertilization, thus “regulating soil” to improve the ability of crop-soil system against to environmental changes, in order to stabilize productivity of rainfed agriculture; (3 Integrate “adjusting water” and “regulating soil” technology, forming technical system of “coordination of water and soil” to comprehensively response to future climate change, mitigate the adverse impact of future climate change on food production in semi-arid region of Northwest, China.

Impact evaluation to communicate and improve conservation non-governmental organization performance: the case of Conservation International.

Science.gov (United States)

McKinnon, Madeleine C; Mascia, Michael B; Yang, Wu; Turner, Will R; Bonham, Curan

2015-11-05

The rising prominence of more rigorous approaches to measuring conservation outcomes has included greater adoption of impact evaluation by conservation non-governmental organizations (CNGOs). Within the scientific literature, however, little consideration has been given to the unique and specific roles of CNGOs in advancing impact evaluation. We explore these issues in the context of one CNGO-Conservation International (CI)-and its experiences producing, using and funding impact evaluations over the past decade. We examine the contributions of impact evaluation to CI's mission at three different stages of CI's strategy: innovation, demonstration and amplification. Furthermore, we review incentives and barriers encountered by CI in its 10+ years' experience in impact evaluation. More coordinated and strategic use of impact evaluation by CNGOs would facilitate learning and promote accountability across the conservation community. © 2015 The Author(s).

Evaluation the potential economic impacts of Taiwanese biomass energy production

International Nuclear Information System (INIS)

Chen, Chi-Chung; McCarl, Bruce; Chang, Ching-Cheng; Tso, Chunto

2011-01-01

The Taiwanese rice paddy land set-aside program diverts a substantial land area. Given today's high energy prices and interests in energy security, that set-aside area could be converted to produce bioenergy feedstocks. This study evaluates the economic and environmental impacts of such a policy change using a Taiwanese agricultural sector model. The results show that such a strategy provides increased farm revenue, increased rural employment, increased energy sufficiency and reduced greenhouse gas emissions but also increased government expenditures. These outcomes indicate that the agricultural sector could play a positive role by producing renewable energy. -- Highlights: → This paper evaluates the economic and environmental impacts of converting set-aside area to produce bioenergy feedstocks. → Taiwanese agricultural sector model is built and applied to evaluate such impacts. → The empirical results show that producing bioenergy using set-aside area could provide increased farm revenue, increased rural employment, increased energy sufficiency and reduced greenhouse gas emissions but also increased government expenditures. → Agricultural sector in Taiwan could play a positive role by producing renewable energy.

Evaluation of the impact of matrix effect on quantification of pesticides in foods by gas chromatography-mass spectrometry using isotope-labeled internal standards.

Science.gov (United States)

Yarita, Takashi; Aoyagi, Yoshie; Otake, Takamitsu

2015-05-29

The impact of the matrix effect in GC-MS quantification of pesticides in food using the corresponding isotope-labeled internal standards was evaluated. A spike-and-recovery study of nine target pesticides was first conducted using paste samples of corn, green soybean, carrot, and pumpkin. The observed analytical values using isotope-labeled internal standards were more accurate for most target pesticides than that obtained using the external calibration method, but were still biased from the spiked concentrations when a matrix-free calibration solution was used for calibration. The respective calibration curves for each target pesticide were also prepared using matrix-free calibration solutions and matrix-matched calibration solutions with blank soybean extract. The intensity ratio of the peaks of most target pesticides to that of the corresponding isotope-labeled internal standards was influenced by the presence of the matrix in the calibration solution; therefore, the observed slope varied. The ratio was also influenced by the type of injection method (splitless or on-column). These results indicated that matrix-matching of the calibration solution is required for very accurate quantification, even if isotope-labeled internal standards were used for calibration. Copyright © 2015 Elsevier B.V. All rights reserved.

Evaluating herbivore management outcomes and associated vegetation impacts

Directory of Open Access Journals (Sweden)

Rina C.C. Grant

2011-05-01

Conservation implications: In rangeland, optimising herbivore numbers to achieve the management objectives without causing unacceptable or irreversible change in the vegetation is challenging. This manuscript explores different avenues to evaluate herbivore impact and the outcomes of management approaches that may affect vegetation.

A policy hackathon for analysing impacts and solutions up to 20 metres sea-level rise

Science.gov (United States)

Haasnoot, Marjolijn; Bouwer, Laurens; Kwadijk, Jaap

2017-04-01

We organised a policy hackathon in order to quantify the impacts accelerated and high-end sea-level rise up to 20 metres on the coast of the Netherlands, and develop possible solutions. This was done during one day, with 20 experts that had a wide variety of disciplines, including hydrology, geology, coastal engineering, economics, and public policy. During the process the problem was divided up into several sub-sets of issues that were analysed and solved within small teams of between 4 to 8 people. Both a top-down impact analysis and bottom-up vulnerability analysis was done by answering the questions: What is the impact of sea level rise of x meter?; and How much sea level rise can be accommodated with before transformative actions are needed? Next, adaptation tipping points were identified that describe conditions under which the coastal system starts to perform unacceptably. Reasons for an adaptation tipping point can be technical (technically not possible), economic (cost-benefits are negative), or resources (available space, sand, energy production, financial). The results are presented in a summary document, and through an infographic displaying different adaptation tipping points and milestones that occur when the sea level rises up to 20 m. No technical limitations were found for adaptation, but many important decisions need to be taken. Although accelerated sea level rise seems far away it can have important consequences for short-term decisions that are required for transformative actions. Such extensive actions require more time for implementation. Also, other action may become ineffective before their design life. This hackathon exercise shows that it is possible to map within a short time frame the issues at hand, as well as potentially effective solutions. This can be replicated for other problems, and can be useful for several decision-makers that require quick but in-depth analysis of their long-term planning problems.

The Impact of Evaluating Customer Complaints in Hotel Enterprises and Service Quality Perceptions on Customer Loyalty

Directory of Open Access Journals (Sweden)

Burhan KILIÇ

2013-12-01

Full Text Available Service enterprises can maintain competitiveness as long as adapting to constantly changing environmental conditions and customer expectations.enterprise which is unable to satisfy its customers with the service offered, it is observed that customers react to quality of the service with complaining behaviors. Therefore, evaluating the complaints and producing solutions are expected to increase the level of the service quality perceptions and it is generally hoped that this situation creates loyal customers. In this context, the study was conducted in a five-star hotel operating in İstanbul and the data were collected through questionnaire forms. Descriptive statistics were applied to clarify the data of the study and the frequency values were used. In order to measure the level, direction and the effect of the variables, correlation and regression analysis were consulted.It was understood that displaying positive attitude and behavior to produce solutions for complaints by the service staff, created a positive impact on the perception of service quality. In addition, the customers whose complaints were responded positively exhibited behavioral and attitudinal aspects of loyalty with being repeat customers and recommending the hotel to friends and relatives

Environmental assessment of Smart City Solutions using a coupled urban metabolism—life cycle impact assessment approach

DEFF Research Database (Denmark)

Lambrecht Ipsen, Kikki; Zimmermann, Regitze Kjær; Sieverts Nielsen, Per

2018-01-01

Purpose The purpose of the study is to quantify the environmental performance of Smart City Solutions at urban system level and thus evaluate their contribution to develop environmentally sustainable urban systems. Further, the study illustrates how this quantification is conducted. Methods...... The case city chosen in our modeling is Copenhagen, where seven Smart City Solutions are introduced: Green Roofs, Smart Windows, Pneumatic Waste Collection, Sensorized Waste Collection, Smart Water Meters, Greywater Recycling, and Smart Energy Grid. The assessment is conducted using a fused urban...... by introducing SmartWindows. Furthermore, the GWP indicator shows an environmental improvement of 10% for a Smart Energy Grid solution. Introduction of Pneumatic Waste Collection or Greywater Recycling reveals a minor negative performance effect of 0.76 and 0.70%, respectively, for GWP. The performance changes...

Evaluating impacts of gender integration on agriculture and food ...

International Development Research Centre (IDRC) Digital Library (Canada)

Evaluating impacts of gender integration on agriculture and food security outcomes ... to and control over land, agricultural technologies, extension services, markets, ... IDRC “unpacks women's empowerment” at McGill University Conference.

Hydrogen sulfide metabolism regulates endothelial solute barrier function

Directory of Open Access Journals (Sweden)

Shuai Yuan

2016-10-01

Full Text Available Hydrogen sulfide (H2S is an important gaseous signaling molecule in the cardiovascular system. In addition to free H2S, H2S can be oxidized to polysulfide which can be biologically active. Since the impact of H2S on endothelial solute barrier function is not known, we sought to determine whether H2S and its various metabolites affect endothelial permeability. In vitro permeability was evaluated using albumin flux and transendothelial electrical resistance. Different H2S donors were used to examine the effects of exogenous H2S. To evaluate the role of endogenous H2S, mouse aortic endothelial cells (MAECs were isolated from wild type mice and mice lacking cystathionine γ-lyase (CSE, a predominant source of H2S in endothelial cells. In vivo permeability was evaluated using the Miles assay. We observed that polysulfide donors induced rapid albumin flux across endothelium. Comparatively, free sulfide donors increased permeability only with higher concentrations and at later time points. Increased solute permeability was associated with disruption of endothelial junction proteins claudin 5 and VE-cadherin, along with enhanced actin stress fiber formation. Importantly, sulfide donors that increase permeability elicited a preferential increase in polysulfide levels within endothelium. Similarly, CSE deficient MAECs showed enhanced solute barrier function along with reduced endogenous bound sulfane sulfur. CSE siRNA knockdown also enhanced endothelial junction structures with increased claudin 5 protein expression. In vivo, CSE genetic deficiency significantly blunted VEGF induced hyperpermeability revealing an important role of the enzyme for barrier function. In summary, endothelial solute permeability is critically regulated via exogenous and endogenous sulfide bioavailability with a prominent role of polysulfides.

Internet-based peer support for Ménière's disease: a summary of web-based data collection, impact evaluation, and user evaluation.

Science.gov (United States)

Pyykkő, Ilmari; Manchaiah, Vinaya; Levo, Hilla; Kentala, Erna; Juhola, Martti

2017-07-01

This paper presents a summary of web-based data collection, impact evaluation, and user evaluations of an Internet-based peer support program for Ménière's disease (MD). The program is written in html-form. The data are stored in a MySQL database and uses machine learning in the diagnosis of MD. The program works interactively with the user and assesses the participant's disorder profile in various dimensions (i.e., symptoms, impact, personal traits, and positive attitude). The inference engine uses a database to compare the impact with 50 referents, and provides regular feedback to the user. Data were analysed using descriptive statistics and regression analysis. The impact evaluation was based on 740 cases and the user evaluation on a sample of 75 cases of MD respectively. The web-based system was useful in data collection and impact evaluation of people with MD. Among those with a recent onset of MD, 78% rated the program as useful or very useful, whereas those with chronic MD rated the program 55%. We suggest that a web-based data collection and impact evaluation for peer support can be helpful while formulating the rehabilitation goals of building the self-confidence needed for coping and increasing social participation.

Impact of soil properties on critical concentrations of cadmium, lead, copper, zinc, and mercury in soil and soil solution in view of ecotoxicological effects.

Science.gov (United States)

de Vries, Wim; Lofts, Steve; Tipping, Ed; Meili, Markus; Groenenberg, Jan E; Schütze, Gudrun

2007-01-01

Risk assessment for metals in terrestrial ecosystems, including assessments of critical loads, requires appropriate critical limits for metal concentrations in soil and soil solution. This chapter presents an overview of methodologies used to derive critical (i) reactive and total metal concentrations in soils and (ii) free metal ion and total metal concentrations in soil solution for Cd, Pb, Cu, Zn, and Hg, taking into account the effect of soil properties related to ecotoxicological effects. Most emphasis is given to the derivation of critical free and total metal concentrations in soil solution, using available NOEC soil data and transfer functions relating solid-phase and dissolved metal concentrations. This approach is based on the assumption that impacts on test organisms (plants, microorganisms, and soil invertebrates) are mainly related to the soil solution concentration (activity) and not to the soil solid-phase content. Critical Cd, Pb, Cu, Zn, and Hg concentrations in soil solution vary with pH and DOC level. The results obtained are generally comparable to those derived for surface waters based on impacts to aquatic organisms. Critical soil metal concentrations, related to the derived soil solution limits, can be described as a function of pH and organic matter and clay content, and varying about one order of magnitude between different soil types.

Impacts of physical and chemical aquifer heterogeneity on basin-scale solute transport: Vulnerability of deep groundwater to arsenic contamination in Bangladesh

Science.gov (United States)

Michael, Holly A.; Khan, Mahfuzur R.

2016-12-01

Aquifer heterogeneity presents a primary challenge in predicting the movement of solutes in groundwater systems. The problem is particularly difficult on very large scales, across which permeability, chemical properties, and pumping rates may vary by many orders of magnitude and data are often sparse. An example is the fluvio-deltaic aquifer system of Bangladesh, where naturally-occurring arsenic (As) exists over tens of thousands of square kilometers in shallow groundwater. Millions of people in As-affected regions rely on deep (≥150 m) groundwater as a safe source of drinking water. The sustainability of this resource has been evaluated with models using effective properties appropriate for a basin-scale contamination problem, but the extent to which preferential flow affects the timescale of downward migration of As-contaminated shallow groundwater is unknown. Here we embed detailed, heterogeneous representations of hydraulic conductivity (K), pumping rates, and sorptive properties (Kd) within a basin-scale numerical groundwater flow and solute transport model to evaluate their effects on vulnerability and deviations from simulations with homogeneous representations in two areas with different flow systems. Advective particle tracking shows that heterogeneity in K does not affect average travel times from shallow zones to 150 m depth, but the travel times of the fastest 10% of particles decreases by a factor of ∼2. Pumping distributions do not strongly affect travel times if irrigation remains shallow, but increases in the deep pumping rate substantially reduce travel times. Simulation of advective-dispersive transport with sorption shows that deep groundwater is protected from contamination over a sustainable timeframe (>1000 y) if the spatial distribution of Kd is uniform. However, if only low-K sediments sorb As, 30% of the aquifer is not protected. Results indicate that sustainable management strategies in the Bengal Basin should consider impacts of both

Effects of solution treatment on mechanical properties and corrosion resistance of 4A duplex stainless steel

Energy Technology Data Exchange (ETDEWEB)

Lu, Panpan; Wang, Aiqin; Wang, Wenyan [Henan Univ. of Science and Technology, Luoyang (China). School of Material Science and Engineering; Xie, Jingpei [Henan Univ. of Science and Technology, Luoyang (China). Collaborative Innovation Center of Nonferrous Metals

2018-02-15

In this study, 4A duplex stainless steels were prepared via remelting in an intermediate frequency furnace and subsequently solution treated at different temperatures. The effects of solution treatment on the mechanical properties and corrosion resistance of 4A duplex stainless steel were investigated. Microstructures were characterized via optical microscopy and scanning electron microscopy. The mechanical properties were evaluated via hardness test, tensile test, and impact test experiments. The point corrosion resistance was studied via chemical immersion and potentiodynamic anodic polarization. The results showed that with increasing solution temperature in the range of 1223 - 1423 K, the tensile strength and hardness first decreased and then increased, and minimum values were obtained at 1323 K. The σ phase precipitated at the boundaries of the α/γ phases in samples solution treated at 1223 K, decreasing both impact energy and pitting potential of the experimental steels. When experimental steels were solution treated at 1373 K for 2 h, a suitable volume fraction of α/γ was uniformly distributed throughout the microstructure, and the steels exhibited optimal mechanical properties and pitting corrosion resistance.

Impact of Diffusion and Variability on Vendor Performance Evaluation

National Research Council Canada - National Science Library

Doerr, Kenneth; Lewis, Ira

2005-01-01

In this paper we develop a theory of the impact of behavioral decision making factors on the evaluation of logistic service providers under performance-based logistics and provide an analysis of pilot...

Analytical solution of transient in-plane vibration of a thin viscoelastic disc and its multi-precision evaluation

Czech Academy of Sciences Publication Activity Database

Adámek, V.; Valeš, František

2012-01-01

Roč. 85, NOV 2012 (2012), s. 34-44 ISSN 0378-4754 R&D Projects: GA ČR(CZ) GAP101/11/0288 Institutional support: RVO:61388998 Keywords : transient vibration * viscoelastic disc * analytical solution Subject RIV: BI - Acoustics Impact factor: 0.836, year: 2012 http://www.sciencedirect.com/science/article/pii/S037847541200225X

Evaluating rain gardens as a method to reduce the impact of sewer overflows in sources of drinking water.

Science.gov (United States)

Autixier, Laurène; Mailhot, Alain; Bolduc, Samuel; Madoux-Humery, Anne-Sophie; Galarneau, Martine; Prévost, Michèle; Dorner, Sarah

2014-11-15

The implications of climate change and changing precipitation patterns need to be investigated to evaluate mitigation measures for source water protection. Potential solutions need first to be evaluated under present climate conditions to determine their utility as climate change adaptation strategies. An urban drainage network receiving both stormwater and wastewater was studied to evaluate potential solutions to reduce the impact of combined sewer overflows (CSOs) in a drinking water source. A detailed hydraulic model was applied to the drainage basin to model the implementation of best management practices at a drainage basin scale. The model was calibrated and validated with field data of CSO flows for seven events from a survey conducted in 2009 and 2010. Rain gardens were evaluated for their reduction of volumes of water entering the drainage network and of CSOs. Scenarios with different levels of implementation were considered and evaluated. Of the total impervious area within the basin directly connected to the sewer system, a maximum of 21% could be alternately directed towards rain gardens. The runoff reductions for the entire catchment ranged from 12.7% to 19.4% depending on the event considered. The maximum discharged volume reduction ranged from 13% to 62% and the maximum peak flow rate reduction ranged from 7% to 56%. Of concern is that in-sewer sediment resuspension is an important process to consider with regard to the efficacy of best management practices aimed at reducing extreme loads and concentrations. Rain gardens were less effective for large events, which are of greater importance for drinking water sources. These practices could increase peak instantaneous loads as a result of greater in-sewer resuspension during large events. Multiple interventions would be required to achieve the objectives of reducing the number, total volumes and peak contaminant loads of overflows upstream of drinking water intakes. Copyright © 2014 Elsevier B.V. All

Impact of solute concentration on the electrocatalytic conversion of dissolved gases in buffered solutions

KAUST Repository

Shinagawa, Tatsuya

2015-04-24

To maintain local pH levels near the electrode during electrochemical reactions, the use of buffer solutions is effective. Nevertheless, the critical effects of the buffer concentration on electrocatalytic performances have not been discussed in detail. In this study, two fundamental electrochemical reactions, oxygen reduction reaction (ORR) and hydrogen oxidation reaction (HOR), on a platinum rotating disk electrode are chosen as model gas-related aqueous electrochemical reactions at various phosphate concentrations. Our detailed investigations revealed that the kinetic and limiting diffusion current densities for both the ORR and HOR logarithmically decrease with increasing solute concentration (log|jORR|=-0.39c+0.92,log|jHOR|=-0.35c+0.73). To clarify the physical aspects of this phenomenon, the electrolyte characteristics are addressed: with increasing phosphate concentration, the gas solubility decrease, the kinematic viscosity of the solution increase and the diffusion coefficient of the dissolved gases decrease. The simulated limiting diffusion currents using the aforementioned parameters match the measured ones very well (log|jORR|=-0.43c+0.99,log|jHOR|=-0.40c+0.54), accurately describing the consequences of the electrolyte concentration. These alterations of the electrolyte properties associated with the solute concentration are universally applicable to other aqueous gas-related electrochemical reactions because the currents are purely determined by mass transfer of the dissolved gases. © 2015 The Authors.

Evaluating international development investments based on ecosystem services impact

Science.gov (United States)

Fremier, A. K.; Brauman, K. A.; Mulligan, M.; Chaplin-Kramer, R.; Gordon, L.; Luedeling, E.; Jones, S. K.; DeClerck, F.

2016-12-01

Engineered water-control structures to supply water for agriculture are frequently funded by international development to an effort to improve human wellbeing. Dams, reservoirs, and other forms of water control frequently have negative impacts on other water users; however, their sustainability in the face of climate change and evolving watershed processes have been called into question. Increasingly, planning for and evaluation of investments in water control require integration of these larger scale impacts and dependencies. Ecosystem service approaches can use local to regional scale knowledge to integrate a broader scope of project impacts by quantifying trade-offs in multiple services across proposed development interventions and future scenarios (economic, climate, demographic). Here, we illustrate the role an ecosystem service approach can play in investment decision making to evaluate the impact of small reservoirs on human wellbeing in the Upper Volta Basin of West Africa. Our project has four components: (1) design of a spatially explicit regional-level social-ecological characterization; (2) construction of future scenario analyses for rainfed and irrigated production system interventions; (3) co-design and co-development of benefit sharing mechanisms at the reservoir catchment level and enhancing institutional capacity to implement these mechanisms through training, professional development and targeting tools; and (4) intervention decision analysis to identify benefits, costs and risks associated with decision options. We illustrate how this approach highlights different outcomes than standard cost-benefit analysis focused narrowly on the single project. Anticipated outcomes are development of ecosystem services-based methods for more equitably and sustainably evaluating development interventions and identifying management approaches to water-impoundment structures that promote a range of ecosystem services to provide food security to a broader

The Value in Evaluating and Communicating Program Impact: The Ohio BR&E Program

Science.gov (United States)

Daivs, Gregory

2012-01-01

Assessing program impact can provide useful program evaluation data. It also provides a basis for program development, marketing, and justification. This article discusses recent impact evaluation efforts and findings of a long-time Extension program; referred to as Business Retention and Expansion (BR&E). How such information can be…

Evaluate the use of tanning agent in leather industry using material flow analysis, life cycle assessment and fuzzy multi-attribute decision making (FMADM)

Science.gov (United States)

Alfarisi, Salman; Sutono, Sugoro Bhakti; Sutopo, Wahyudi

2017-11-01

Tanning industry is one of the companies that produce many pollutants and cause the negative impact on the environment. In the production process of tanning leather, the use of input material need to be evaluated. The problem of waste, not only have a negative impact on the environment, but also human health. In this study, the impact of mimosa as vegetable tanning agent evaluated. This study will provide alternative solutions for improvements to the use of vegetable tanning agent. The alternative solution is change mimosa with indusol, gambier, and dulcotan. This study evaluate the vegetable tanning of some aspects using material flow analysis and life cycle assessment approach. Life cycle assessment (LCA) is used to evaluate the environmental impact of vegetable tanning agent. Alternative solution selection using fuzzy multi-attribute decision making (FMADM) approach. Results obtained by considering the environment, human toxicity, climate change, and marine aquatic ecotoxicity, is to use dulcotan.

Corrosion evaluation of uranyl nitrate solution evaporator and denitrator in Tokai reprocessing plant

International Nuclear Information System (INIS)

Yamanaka, Atsushi; Hashimoto, Kowa; Uchida, Toyomi; Shirato, Yoji; Isozaki, Toshihiko; Nakamura, Yoshinobu

2011-01-01

The Tokai reprocessing plant (TRP) adopted the PUREX method in 1977 and has reprocessed spent nuclear fuel of 1140 tHM (tons of heavy metals) since then. The reprocessing equipment suffers from various corrosion phenomena because of high nitric acidity, solution ion concentrations, such as uranium, plutonium, and fission products, and temperature. Therefore, considering corrosion performance in such a severe environment, stainless steels, titanium steel, and so forth were employed as corrosion resistant materials. The severity of the corrosive environment depends on the nitric acid concentration and the temperature of the solution, and uranium in the solution reportedly does not significantly affect the corrosion of stainless steels and controls the corrosion rates of titanium steel. The TRP equipment that handles uranyl nitrate solution operates at a low nitric acid concentration and has not experienced corrosion problems until now. However, there is a report that corrosion rates of some stainless steels increase in proportion to rising uranium concentrations. The equipment that handles the uranyl nitrate solution in the TRP includes the evaporators, which concentrate uranyl nitrate to a maximum concentration of about 1000 gU/L (grams of uranium per liter), and the denitrator, where uranyl nitrate is converted to UO 3 powder at about 320degC. These equipments are therefore required to grasp the degree of the progress of corrosion to handle high-temperature and high-concentration uranyl nitrate. The evaluation of this equipment on the basis of thickness measurement confirmed only minor corrosion and indicated that the equipment would be fully adequate for future operation. (author)

Evaluating Academic Journals without Impact Factors for Collection Management Decisions.

Science.gov (United States)

Dilevko, Juris; Atkinson, Esther

2002-01-01

Discussion of evaluating academic journals for collection management decisions focuses on a methodological framework for evaluating journals not ranked by impact factors in Journal Citation Reports. Compares nonranked journals with ranked journals and then applies this framework to a case study in the field of medical science. (LRW)

The Internet's Impact on Policy Evaluation: Information Compression and Credibility

Science.gov (United States)

Bozeman, Barry

2004-01-01

As with all media, the Internet structures and frames information, rewarding some information search and decision behaviors while punishing others and, thereby, strongly influences evaluation research results and possibilities. Now that the Internet is for many evaluators the information medium of choice, the impacts of the medium on evaluation…

Electrodialysis potential for fractionation of multicomponent aqueous solutions

Directory of Open Access Journals (Sweden)

Grzegorzek Martyna

2017-01-01

Full Text Available The paper aimed at the evaluation of the batch electrodialysis (ED run in the course of treatment and desalination of various aqueous mixtures containing both mineral (sodium fluoride, sodium chloride and organic substances (dyes or humic acids. The commercial ED stack (PCCell Bed equipped with standard anion-exchange and cation-exchange membranes or monovalent selective anion-exchange membranes was used. The ED experiments were performed at a constant current density (1.56 or 1.72 mA/cm2. The mechanism of ion migration as well as membrane deposition for variable solution composition and various membrane types was analyzed The calculated mass balance and electrical energy demand for each ED run were helpful in evaluating the membrane fouling intensity. It was found that the presence of organic substances in the treated solution had a minor impact on energy consumption, but rather strongly affected chloride flux. The extent of organics deposition was significantly lower for monovalent selective anion-exchange membranes than for classic anion-exchange membranes.

EcoMark: Evaluating Models of Vehicular Environmental Impact

DEFF Research Database (Denmark)

Guo, Chenjuan; Ma, Mike; Yang, Bin

2012-01-01

The reduction of greenhouse gas (GHG) emissions from transporta- tion is essential for achieving politically agreed upon emissions re- duction targets that aim to combat global climate change. So-called eco-routing and eco-driving are able to substantially reduce GHG emissions caused by vehicular...... the vehicle travels in. We develop an evaluation framework, called EcoMark, for such environmental impact models. In addition, we survey all eleven state-of-the-art impact models known to us. To gain insight into the capabilities of the models and to understand the effectiveness of the EcoMark, we apply...

Impact of long-term organic residue recycling in agriculture on soil solution composition and trace metal leaching in soils.

Science.gov (United States)

Cambier, Philippe; Pot, Valérie; Mercier, Vincent; Michaud, Aurélia; Benoit, Pierre; Revallier, Agathe; Houot, Sabine

2014-11-15

Recycling composted organic residues in agriculture can reduce the need of mineral fertilizers and improve the physicochemical and biological properties of cultivated soils. However, some trace elements may accumulate in soils following repeated applications and impact other compartments of the agrosystems. This study aims at evaluating the long-term impact of such practices on the composition of soil leaching water, especially on trace metal concentrations. The field experiment QualiAgro started in 1998 on typical loess Luvisol of the Paris Basin, with a maize-wheat crop succession and five modalities: spreading of three different urban waste composts, farmyard manure (FYM), and no organic amendment (CTR). Inputs of trace metals have been close to regulatory limits, but supplies of organic matter and nitrogen overpassed common practices. Soil solutions were collected from wick lysimeters at 45 and 100 cm in one plot for each modality, during two drainage periods after the last spreading. Despite wide temporal variations, a significant effect of treatments on major solutes appears at 45 cm: DOC, Ca, K, Mg, Na, nitrate, sulphate and chloride concentrations were higher in most amended plots compared to CTR. Cu concentrations were also significantly higher in leachates of amended plots compared to CTR, whereas no clear effect emerged for Zn. The influence of amendments on solute concentrations appeared weaker at 1 m than at 45 cm, but still significant and positive for major anions and DOC. Average concentrations of Cu and Zn at 1m depth lied in the ranges [2.5; 3.8] and [2.5; 10.5 μg/L], respectively, with values slightly higher for plots amended with sewage sludge compost or FYM than for CTR. However, leaching of both metals was less than 1% of their respective inputs through organic amendments. For Cd, most values were <0.05 μg/L. So, metals added through spreading of compost or manure during 14 years may have increased metal concentrations in leachates of

An Overview on Evaluating and Predicting Scholarly Article Impact

Directory of Open Access Journals (Sweden)

Xiaomei Bai

2017-06-01

Full Text Available Scholarly article impact reflects the significance of academic output recognised by academic peers, and it often plays a crucial role in assessing the scientific achievements of researchers, teams, institutions and countries. It is also used for addressing various needs in the academic and scientific arena, such as recruitment decisions, promotions, and funding allocations. This article provides a comprehensive review of recent progresses related to article impact assessment and prediction. The review starts by sharing some insight into the article impact research and outlines current research status. Some core methods and recent progress are presented to outline how article impact metrics and prediction have evolved to consider integrating multiple networks. Key techniques, including statistical analysis, machine learning, data mining and network science, are discussed. In particular, we highlight important applications of each technique in article impact research. Subsequently, we discuss the open issues and challenges of article impact research. At the same time, this review points out some important research directions, including article impact evaluation by considering Conflict of Interest, time and location information, various distributions of scholarly entities, and rising stars.

Laboratory Evaluation of Low-Cost Wearable Sensors for Measuring Head Impacts in Sports.

Science.gov (United States)

Tyson, Abigail M; Duma, Stefan M; Rowson, Steven

2018-04-03

Advances in low-cost wearable head impact sensor technology provide potential benefits regarding sports safety for both consumers and researchers. However, previous laboratory evaluations are not directly comparable and don't incorporate test conditions representative of unhelmeted impacts. This study addresses those limitations. The xPatch by X2 Biosystems and the SIM-G by Triax Technologies were placed on a NOCSAE headform with a Hybrid III neck which underwent impacts tests using a pendulum. Impact conditions included helmeted, padded impactor to bare head, and rigid impactor to bare head to represent long and short-duration impacts seen in helmeted and unhelmeted sports. The wearable sensors were evaluated on their kinematic accuracy by comparing results to reference sensors located at the headform center of gravity. Statistical tests for equivalence were performed on the slope of the linear regression between wearable sensors and reference. The xPatch gave equivalent measurements to the reference in select longer-duration impacts whereas the SIM-G had large variance leading to no equivalence. For the short-duration impacts, both wearable sensors underpredicted the reference. This error can be improved with increases in sampling rate from 1 to 1.5 kHz. Follow-up evaluations should be performed on the field to identify error in vivo. (197/200).

Modeling IoT-Based Solutions Using Human-Centric Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Álvaro Monares

2014-08-01

Full Text Available The Internet of Things (IoT has inspired solutions that are already available for addressing problems in various application scenarios, such as healthcare, security, emergency support and tourism. However, there is no clear approach to modeling these systems and envisioning their capabilities at the design time. Therefore, the process of designing these systems is ad hoc and its real impact is evaluated once the solution is already implemented, which is risky and expensive. This paper proposes a modeling approach that uses human-centric wireless sensor networks to specify and evaluate models of IoT-based systems at the time of design, avoiding the need to spend time and effort on early implementations of immature designs. It allows designers to focus on the system design, leaving the implementation decisions for a next phase. The article illustrates the usefulness of this proposal through a running example, showing the design of an IoT-based solution to support the first responses during medium-sized or large urban incidents. The case study used in the proposal evaluation is based on a real train crash. The proposed modeling approach can be used to design IoT-based systems for other application scenarios, e.g., to support security operatives or monitor chronic patients in their homes.

Modeling IoT-based solutions using human-centric wireless sensor networks.

Science.gov (United States)

Monares, Álvaro; Ochoa, Sergio F; Santos, Rodrigo; Orozco, Javier; Meseguer, Roc

2014-08-25

The Internet of Things (IoT) has inspired solutions that are already available for addressing problems in various application scenarios, such as healthcare, security, emergency support and tourism. However, there is no clear approach to modeling these systems and envisioning their capabilities at the design time. Therefore, the process of designing these systems is ad hoc and its real impact is evaluated once the solution is already implemented, which is risky and expensive. This paper proposes a modeling approach that uses human-centric wireless sensor networks to specify and evaluate models of IoT-based systems at the time of design, avoiding the need to spend time and effort on early implementations of immature designs. It allows designers to focus on the system design, leaving the implementation decisions for a next phase. The article illustrates the usefulness of this proposal through a running example, showing the design of an IoT-based solution to support the first responses during medium-sized or large urban incidents. The case study used in the proposal evaluation is based on a real train crash. The proposed modeling approach can be used to design IoT-based systems for other application scenarios, e.g., to support security operatives or monitor chronic patients in their homes.

A method proposal for cumulative environmental impact assessment based on the landscape vulnerability evaluation

International Nuclear Information System (INIS)

Pavlickova, Katarina; Vyskupova, Monika

2015-01-01

Cumulative environmental impact assessment deals with the occasional use in practical application of environmental impact assessment process. The main reasons are the difficulty of cumulative impact identification caused by lack of data, inability to measure the intensity and spatial effect of all types of impacts and the uncertainty of their future evolution. This work presents a method proposal to predict cumulative impacts on the basis of landscape vulnerability evaluation. For this purpose, qualitative assessment of landscape ecological stability is conducted and major vulnerability indicators of environmental and socio-economic receptors are specified and valuated. Potential cumulative impacts and the overall impact significance are predicted quantitatively in modified Argonne multiple matrixes while considering the vulnerability of affected landscape receptors and the significance of impacts identified individually. The method was employed in the concrete environmental impact assessment process conducted in Slovakia. The results obtained in this case study reflect that this methodology is simple to apply, valid for all types of impacts and projects, inexpensive and not time-consuming. The objectivity of the partial methods used in this procedure is improved by quantitative landscape ecological stability evaluation, assignment of weights to vulnerability indicators based on the detailed characteristics of affected factors, and grading impact significance. - Highlights: • This paper suggests a method proposal for cumulative impact prediction. • The method includes landscape vulnerability evaluation. • The vulnerability of affected receptors is determined by their sensitivity. • This method can increase the objectivity of impact prediction in the EIA process

Development and evaluation of methods for safeguards use of solution monitoring data

International Nuclear Information System (INIS)

Burr, T.; Wangen, L.

1996-09-01

This report describes the effort to develop, implement, and evaluate data analysis methods for solution-monitoring measurements in the plutonium nitrate storage at the Tokai Reprocessing Plant (TRP). The intent is to address TRP-specific issues to some extent, as well as to anticipate the data analysis needs at future reprocessing plants (especially the new Rokkasho reprocessing plant (RRP)) in Japan. The essential difference between a plant like TRP and a more modern plant like RRP is that one expects more and better instrumentation in the tanks in a modern plant. Because the TRP solution monitoring hardware is scheduled to be upgraded, the authors de-emphasized the effort to handle information-poor plants like TRP. This report mostly describes the analysis methods and software for finding and identifying all key tank events. To a large extent they have to experiment with several candidate methods for implementing their analysis objectives. Therefore, they chose to use a prototyping software system called S-PLUS, which is an object-oriented statistical programming and graphics package. The intent is to eventually implement selected portions of their current solution-monitoring toolkit in a more robust and user-friendly system. The authors describe their current software system as being far more than they needed for their own in-house use (menus are provided for the user who doesn't want to type any S-PLUS commands), but less than is needed for a fieldable system. Mostly as a result of working on this project, they have come to conclude that solution monitoring is a potentially very valuable asset to nuclear safeguards at a modern reprocessing plant

Accounting for uncertainty in evaluating water quality impacts of urban development plan

International Nuclear Information System (INIS)

Zhou Jiquan; Liu Yi; Chen Jining

2010-01-01

The implementation of urban development plans causes land use change, which can have significant environmental impacts. In light of this, environmental concerns should be considered sufficiently at an early stage of the planning process. However, uncertainties existing in urban development plans hamper the application of strategic environmental assessment, which is applied to evaluate the environmental impacts of policies, plans and programs. This study develops an integrated assessment method based on accounting uncertainty of environmental impacts. And the proposed method consists of four main steps: (1) designing scenarios of economic scale and industrial structure, (2) sampling for possible land use layouts, (3) evaluating each sample's environmental impact, and (4) identifying environmentally sensitive industries. In doing so, uncertainties of environmental impacts can be accounted. Then environmental risk, overall environmental pressure and potential extreme environmental impact of urban development plans can be analyzed, and environmentally sensitive factors can be identified, especially under considerations of uncertainties. It can help decision-makers enhance environmental consideration and take measures in the early stage of decision-making.

Does supplier evaluation impact process improvement?

Directory of Open Access Journals (Sweden)

Shiva Prasad h c

2016-09-01

Full Text Available Purpose: The research explores and examines factors for supplier evaluation and its impact on process improvement particularly aiming on a steel pipe manufacturing firm in Gujarat, India. Design/Methodology/approach: The conceptual research framework was developed and hypotheses were stated considering the analysis of literature and discussions with the managers and engineers of a steel pipe manufacturing company in Gujarat, India. Data was collected using in-depth interview. The questionnaire primarily involves the perception of evaluation of supplier. Factors influencing supplier evaluation and its influence on process improvement is also examined in this study. The model testing and validation was done using partial least square method. Outcomes signified that the factors that influence evaluation of the supplier are quality, cost, delivery and supplier relationship management. Findings: The study depicted that quality and cost factors for supplier evaluation are insignificant. The delivery and supplier relationship management have significant influence on evaluation of the supplier. The research also depicted that supplier evaluation has significant influence on process improvement. Research limitations/implications: The study has been made specifically for ABC steel pipe manufacturing industry in Gujarat, India and may not be appropriate to the other industries or any parts of the world. There is a possibility of response bias as the conclusions of this research was interpreted on survey responses taken from the employees of case study company, so it is suggested that future research can overcome this problem by employing various methodologies in addition to surveys like carrying out focus group and in-depth interviews, brainstorming sessions with the experts etc. Originality/value: Many researchers have considered quality, cost and delivery as the factors for evaluating the suppliers. But for a company it is quintessential to have good

Evaluation of environmental impact assessment system in Pakistan

International Nuclear Information System (INIS)

Nadeem, Obaidullah; Hameed, Rizwan

2008-01-01

Environmental impact assessment (EIA) was first introduced in Pakistan based on the Environmental Protection Ordinance 1983. The EIA process was further strengthened under the Pakistan Environmental Protection Act 1997, which became operational under EIA Regulations 2000. Despite a sound legal basis and comprehensive guidelines, evidence suggests that EIA has not yet evolved satisfactorily in Pakistan. An evaluation of the EIA system against systematic evaluation criteria, based on interviews with EIA approval authorities, consulting firms and experts, reveals various shortcomings of the EIA system. These mainly include; inadequate capacity of EIA approval authorities, deficiencies in screening and scoping, poor EIA quality, inadequate public participation and weak monitoring. Overall, EIA is used presently as a project justification tool rather than as a project planning tool to contribute to achieving sustainable development. Whilst shortcomings are challenging, central government has recently shown a high degree of commitment to the environmental protection by making EIA compulsory for all the public sector projects likely to have adverse environmental impacts. The paper identifies opportunities for taking advantage of the current environment for strengthening the EIA process

Evaluating the Impact of Educational Interventions on Patients and Communities: A Conceptual Framework.

Science.gov (United States)

Bzowyckyj, Andrew S; Dow, Alan; Knab, Mary S

2017-11-01

Health professions education programs can have direct effects on patients and communities as well as on learners. However, few studies have examined the patient and community outcomes of educational interventions. To better integrate education and health care delivery, educators and researchers would benefit from a unifying framework to guide the planning of educational interventions and evaluation of their impact on patients.The authors of this Perspective mirrored approaches from Miller's pyramid of educational assessment and Moore and colleagues' framework for evaluating continuing professional development to propose a conceptual framework for evaluating the impact of educational interventions on patients and communities. This proposed framework, which complements these existing frameworks for evaluating the impact of educational interventions on learners, includes four levels: (1) interaction; (2) acceptability; (3) individual outcomes (i.e., knowledge, skills, activation, behaviors, and individual health indicators); and (4) population outcomes (i.e., community health indicators, capacity, and disparities). The authors describe measures and outcomes at each level and provide an example of the application of their new conceptual framework.The authors encourage educators and researchers to use this conceptual framework to evaluate the impact of educational interventions on patients and to more clearly identify and define which educational interventions strengthen communities and enhance overall health outcomes.

Synchronization of impacting mechanical systems with a single constraint

Science.gov (United States)

Baumann, Michael; Biemond, J. J. Benjamin; Leine, Remco I.; van de Wouw, Nathan

2018-01-01

This paper addresses the synchronization problem of mechanical systems subjected to a single geometric unilateral constraint. The impacts of the individual systems, induced by the unilateral constraint, generally do not coincide even if the solutions are arbitrarily 'close' to each other. The mismatch in the impact time instants demands a careful choice of the distance function to allow for an intuitively correct comparison of the discontinuous solutions resulting from the impacts. We propose a distance function induced by the quotient metric, which is based on an equivalence relation using the impact map. The distance function obtained in this way is continuous in time when evaluated along jumping solutions. The property of maximal monotonicity, which is fulfilled by most commonly used impact laws, is used to significantly reduce the complexity of the distance function. Based on the simplified distance function, a Lyapunov function is constructed to investigate the synchronization problem for two identical one-dimensional mechanical systems. Sufficient conditions for the uncoupled individual systems are provided under which local synchronization is guaranteed. Furthermore, we present an interaction law which ensures global synchronization, also in the presence of grazing trajectories and accumulation points (Zeno behavior). The results are illustrated using numerical examples of a 1-DOF mechanical impact oscillator which serves as stepping stone in the direction of more general systems.

Evaluation of the radiographic process using a experimental monobath solution compared with normal (Kodak) and rapid (RAY) developer solutions

International Nuclear Information System (INIS)

Baratieri, N.M.M.

1985-01-01

A comparative evaluation of the radiographic image quality of two dental X-ray films (Kodak's EP-21 and Agfa-Gevaert DOS-1) when processed in a normal (Kodak) a rapid (Ray) and a experimental monobath solutions, is presented. These films, processed in those solutions had their time of development, temperature and agitation performances checked by sensitometry; pH and color by routine methods and hipo rests by spectrophotometry. The radiographies were also analysed by able professionals regarding the best development time. The data so obtained allowed the conclusions that the best development time for the monobath was 3 minutes at 20 0 C but 25 or 30 0 C give also acceptable results at shorter times. The agitation of 10 seconds every minute is an important factor concerning image quality. pH and color do alter rapidally but with little influence in the final result. We found a certain amount of residual chemical compounds which were not identified but that are not hipo components, and being important to note that they seem not act upon the emulsion at least during one year after processing. (author) [pt

Evaluating the Impact of Design-Driven Requirements Using SysML

Data.gov (United States)

National Aeronautics and Space Administration — The proposed research will develop SysML requirements modeling patterns and scripts to automate the evaluation of the impact of design driven requirements....

Evaluation of the sanitary impact of urban air pollution. Update version of the methodological guide; Evaluation de l'impact sanitaire de la pollution atmospherique urbaine. Version actualisee du guide methodologique

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-03-15

In order to bring a help to the evaluation of effects of air quality on health, the Institute of Sanitary surveillance published in 1999 a method guide for the realisation of sanitary impact evaluations of the urban air pollution. This work to prepare to an update version of the guide presents the first recommendations that can be made today for the realisation of sanitary impact evaluations at short and long term at a local level, taking into account the knowledge evolution. (N.C.)

Energy and environmental evaluation of tri-generation energy systems

International Nuclear Information System (INIS)

Chicco, G.; Mancarella, P.

2008-01-01

Tri generation facilities manufactured with various technologies represent an important alternative solution for the development more efficient energy systems and low environmental impact. Are described the issues related to modelling and energy and environmental evaluation [it

Evaluation of Visual and Landscape Impacts of Nuclear Power Plants

International Nuclear Information System (INIS)

Algohary, S.A.

2007-01-01

The nuclear power plant is a huge structure, and in terms of both size and function may result in an unacceptable visual conflict in both local and wider environment. Also, it has major implications in terms of physical, social, economic, environmental and impact on people. The environmental impacts include the visual and landscape aspects of these plants. This paper outlines the main general ideas of the architecture aspects of nuclear power plants, nuclear reactors. Also, it discusses the site selection considerations: Finally, it introduces an approach for the evaluation of visual and landscape impacts of nuclear power plants

Analytical solutions for evaluating the thermal performances of wet air cooling coils under both unit and non-unit Lewis Factors

International Nuclear Information System (INIS)

Xia Liang; Chan, M.Y.; Deng, S.M.; Xu, X.G.

2010-01-01

Analytical solutions for evaluating the thermal performances of both chilled water wet cooling coils and direct expansion (DX) wet cooling coils, respectively, under both unit and non-unit Lewis Factors are developed and reported in this paper. The analytical solution was validated by comparing its predictions with those from numerically solving the fundamental governing equations of heat and mass transfer taking place in a wet cooling coil. With the analytical solutions, the distributions of air temperature and humidity ratio along air flow direction in a wet cooling coil can be predicted, and the differences in the thermal performances of the cooling coils under both unit and non-unit Lewis Factors can be identified. The analytical solutions, on one hand, can be a low-cost replacement to numerically solving the fundamental heat and mass transfer governing equations, and on the other hand, is able to deal with evaluating thermal performance for wet air cooling coils operated under both unit and non-unit Lewis Factors.

Environmental impact of Yucca Mountain Repository

International Nuclear Information System (INIS)

Ahn, Joonhong

2005-01-01

Environmental impact of the Yucca Mountain Repository (YMR) has been quantitatively evaluated in terms of the radiotoxicity of transuranic (TRU) and fission-product radionuclides existing in the environment after released from failed packages. Inventory abstraction has been made based on the data published in Final Environmental Impact Statement published by US DOE. Mathematical model and computation code have been developed based on analytical solutions. Environmental impact from the commercial spent nuclear fuel (CSNF) packages is about 90% of the total impact including the contribution from defense waste (DW) packages. Impacts due to isotopes of Cm, Am, Pu and Np, and their decay daughters are dominant, compared with those from fission-product nuclides. Numerical results show that reduction of the TRU nuclides by a factor of 100 makes the impact from CSNF smaller than that from DW. (author)

Management of the impact on soil in Republic of Moldova: Problems and solutions

Directory of Open Access Journals (Sweden)

Petru BACAL

2011-09-01

Full Text Available The great impact on soils in Republic of Moldova is represented by the non-ecological exploitation of agricultural land, non-sanitation of rural space, massive negligence ofpopulation and local authorities, surveillance and control authorities of land resources. The most common form of impact on soils is erosion. Very rapid increase of the surfacesaffected by erosion is conditioned, in particular, by the non-compliance of environmental requirements to allocation and exploitation of agricultural land and by the actualinefficient management of land resources. In the last two decades, there has been a significant reduction of ecological laboratories for soil quality evaluation, conditioned by liquidation of district and regional centres of plant protection. The State Ecological Inspectorate, which has the exclusive function of ecological damage evaluation, has very modest financial and human resources. As a result, despite the frequent cases of infringement of soil and land protection, because of very low evaluation capacity, most environmental damage in this area are not established and subject to compensation, and most land beneficiaries ignore normative of land and soil use and protection. Due to financial shortages in rural areas apply minimum rates of fines, which do notreflect the real impact on the soil cover. The collected sums from the application of fines are significantly lower than the damage caused to the soils. Under the new Offences Code,it was introduced the penalty for burning stubble, substantially increasing the payment discharge and the amounts of fines for unauthorized land use and for destruction of soilfertile layer. However, there is no positive change in penalties for causing erosion, for falsifying and concealing information about the status of land. Most damage compensation actions are brought for burning stubble and for soil contamination, while compensation actions for damage caused by erosion and

Interviewing: Methodological Briefs - Impact Evaluation No. 12

OpenAIRE

Bronwen McDonald; Patricia Rogers

2014-01-01

Interviews are easy to do badly and hard to do well - good planning, adequate time and appropriate skills are required. The type of interview should be carefully chosen to suit the situation rather than choosing a type of interview (such as focus groups) simply because it is commonly used. Interviews with children raise particular ethical issues that need to be carefully considered and fully addressed. This brief outlines key issues to consider in planning interviews for impact evaluation, ta...

Application of Differential Colorimetry To Evaluate Anthocyanin-Flavonol-Flavanol Ternary Copigmentation Interactions in Model Solutions.

Science.gov (United States)

Gordillo, Belén; Rodríguez-Pulido, Francisco J; González-Miret, M Lourdes; Quijada-Morín, Natalia; Rivas-Gonzalo, Julián C; García-Estévez, Ignacio; Heredia, Francisco J; Escribano-Bailón, M Teresa

2015-09-09

The combined effect of anthocyanin-flavanol-flavonol ternary interactions on the colorimetric and chemical stability of malvidin-3-glucoside has been studied. Model solutions with fixed malvidin-3-glucoside/(+)-catechin ratio (MC) and variable quercetin-3-β-d-glucoside concentration (MC+Q) and solutions with fixed malvidin-3-glucoside/quercetin-3-β-d-glucoside ratio (MQ) and variable (+)-catechin concentration (MQ+C) were tested at levels closer to those existing in wines. Color variations during storage were evaluated by differential colorimetry. Changes in the anthocyanin concentration were monitored by HPLC-DAD. CIELAB color-difference formulas were demonstrated to be of practical interest to assess the stronger and more stable interaction of quercetin-3-β-d-glucoside with MC binary mixture than (+)-catechin with MQ mixture. The results imply that MC+Q ternary solutions kept their intensity and bluish tonalities for a longer time in comparison to MQ+C solutions. The stability of malvidin-3-glucoside improves when the concentration of quercetin-3-β-d-glucoside increases in MC+Q mixtures, whereas the addition of (+)-catechin in MQ+C mixtures resulted in an opposite effect.

Influencing policy through impact evaluation in Latin America and ...

International Development Research Centre (IDRC) Digital Library (Canada)

IDRC's Supporting Inclusive Growth (SIG) program supports the strengthening of research capacity, to generate and use evidence that contributes to informed public dialogue and policymaking. Impact Evaluation for Policy Making: A Close Look at Latin American Countries with Weaker Research Capacities, the fourth title ...

Discrimination of solvent from protein regions in native Fouriers as a means of evaluating heavy-atom solutions in the MIR and MAD methods

International Nuclear Information System (INIS)

Terwilliger, Thomas C.; Berendzen, Joel

1999-01-01

The presence of distinct regions of high and low density variation in electron-density maps is found to be a good indicator of the correctness of a heavy-atom solution in the MIR and MAD methods. An automated examination of the native Fourier is tested as a means of evaluation of a heavy-atom solution in MAD and MIR methods for macromolecular crystallography. It is found that the presence of distinct regions of high and low density variation in electron-density maps is a good indicator of the correctness of a heavy-atom solution in the MIR and MAD methods. The method can be used to evaluate heavy-atom solutions during MAD and MIR structure solutions and to determine the handedness of the structure if anomalous data have been measured

Antimicrobial action of sodium hypochlorite and castor oil solutions for denture cleaning - in vitro evaluation.

Science.gov (United States)

Salles, Marcela Moreira; Oliveira, Viviane de Cássia; Souza, Raphael Freitas; Silva, Cláudia Helena Lovato; Paranhos, Helena de Freitas Oliveira

2015-01-01

The objective of this in vitro study was to evaluate the antimicrobial action of sodium hypochlorite (0.25% and 0.50%) and 10% castor oil solutions against specific microorganisms, by counting Colony Forming Units (CFU) of clinically important bacteria and Candida species. Acrylic resin specimens (n = 320; Lucitone 550) were obtained from square metal matrices (10 x 10 x 2 mm), sterilized by microwave (650W, for 6 minutes) and contaminated by Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans, Bacillus subtilis, Escherichia coli, Streptococcus mutans, Enterococcus faecalis and Candida glabrata. The specimens were immersed for 20 minutes in one of the following hygiene solutions (n = 10/each): A - 0.25% Sodium hypochlorite; B - 0.5% Sodium hypochlorite; C - 10% Castor oil solution; and D (Control) - saline. Adhered cells were suspended and inoculated into a selective solid medium (37ºC for 24 h). The Student's t-test (α = 0.05) was performed to compare log10(CFU+1)/mL between Groups C and D. The results showed that sodium hypochlorite (0.25% and 0.5%) completely eliminated all detectable microorganisms. The castor oil solution eliminated B. subtilis and reduced counts for other strains. Differences between C and D were significant (p castor oil solution provided moderate efficacy and performed differently on the tested species, with the strongest effect on B. subtilis and with non-significant action on E. faecalis.

Retrofitting the Low Impact Development Practices into Developed Urban areas Including Barriers and Potential Solution

Science.gov (United States)

Shafique, Muhammad; Kim, Reeho

2017-06-01

Low impact development (LID)/green infrastructure (GI) practices have been identified as the sustainable practices of managing the stormwater in urban areas. Due to the increasing population, most of the cities are more developing which results in the change of natural area into impervious areas (roads, buildings etc.). Moreover, urbanization and climate change are causing many water-related problems and making over cities unsafe and insecure. Under these circumstances, there is a need to introduce new stormwater management practices into developed cities to reduce the adverse impacts of urbanization. For this purpose, retrofitting low impact development practices demands more attention to reduce these water-related problems and trying to make our cities sustainable. In developed areas, there is a little space is available for the retrofitting of LID practices for the stormwater management. Therefore, the selection of an appropriate place to retrofitting LID practices needs more concern. This paper describes the successfully applied retrofitting LID practices around the globe. It also includes the process of applying retrofitting LID practices at the suitable place with the suitable combination. Optimal places for the retrofitting of different LID practices are also mentioned. This paper also highlights the barriers and potential solutions of retrofitting LID practices in urban areas.

Retrofitting the Low Impact Development Practices into Developed Urban areas Including Barriers and Potential Solution

Directory of Open Access Journals (Sweden)

Shafique Muhammad

2017-06-01

Full Text Available Low impact development (LID/green infrastructure (GI practices have been identified as the sustainable practices of managing the stormwater in urban areas. Due to the increasing population, most of the cities are more developing which results in the change of natural area into impervious areas (roads, buildings etc.. Moreover, urbanization and climate change are causing many water-related problems and making over cities unsafe and insecure. Under these circumstances, there is a need to introduce new stormwater management practices into developed cities to reduce the adverse impacts of urbanization. For this purpose, retrofitting low impact development practices demands more attention to reduce these water-related problems and trying to make our cities sustainable. In developed areas, there is a little space is available for the retrofitting of LID practices for the stormwater management. Therefore, the selection of an appropriate place to retrofitting LID practices needs more concern. This paper describes the successfully applied retrofitting LID practices around the globe. It also includes the process of applying retrofitting LID practices at the suitable place with the suitable combination. Optimal places for the retrofitting of different LID practices are also mentioned. This paper also highlights the barriers and potential solutions of retrofitting LID practices in urban areas.

Evaluation and impact of cardiotocography training programmes: a systematic review.

Science.gov (United States)

Pehrson, C; Sorensen, J L; Amer-Wåhlin, I

2011-07-01

The interpretation and management of cardiotocography (CTG) tracings are often criticised in obstetric malpractice cases. As a consequence, regular CTG training has been recommended, even though little is known about the effect of CTG training. To perform a systematic review of the existing literature on studies on CTG training in order to assess educational strategies, evaluation of training programmes, and impact of training programmes. The Medline database was searched to identify studies describing and/or evaluating CTG training programmes. The literature search resulted in 409 citations. Twenty studies describing and evaluating CTG training programmes were included. There was no restriction on study design. Data regarding study design, study quality, educational strategies used for training in CTG interpretation and decision making, target groups, number of participants, methods used for evaluation, quality of evaluation, level of evaluation and results of training was extracted from 20 articles, and analysed using Kirkpatrick's four-level model for the evaluation of education. Training was associated with improvements on all Kirkpatrick levels, resulting in increased CTG knowledge and interpretive skills, higher interobserver agreement, better management of intrapartum CTG, and improved quality of care. Computer-based training (CBT) might be less time-consuming than classroom teaching. Clinical skills seem to decrease faster than theoretical knowledge. Training can improve CTG competence and clinical practise. Further research on CBT, test-enhanced learning and long-term retention, evaluation of training and impact on clinical outcomes is recommended. © 2011 The Authors BJOG An International Journal of Obstetrics and Gynaecology © 2011 RCOG.

Diffusion of nanoparticles in solution through elastomeric membrane

International Nuclear Information System (INIS)

Zemzem, Mohamed; Vinches, Ludwig; Hallé, Stéphane

2017-01-01

Diffusion phenomena encountered in mass transfer of liquids play an important role in many technological processes of polymer manufacturing and use. In addition and alongside the notable growth of nanoparticles use, particularly when in suspension in liquid solutions, it has become important to pay some attention to their interactions with polymeric structures. The aim of this work is to evaluate some diffusion parameters of gold nanoparticle solutions as well as of their liquid carrier (water) through elastomeric membranes. Gravimetric method was chosen as the main technique to quantify swelling phenomena and to assess kinetic properties. The dynamic liquid uptake measurements were conducted on gold nanoparticles (5 nm and 50 nm in diameter) in aqueous solutions when brought into contact with two types of nitrile material samples. Results showed that diffusion mechanism of the liquids lies between Fickian and sub-Fickian modes. Slight deviations were noticed with the gold nanoparticle solutions. A growth in liquid interaction with the rubbery structure in presence of the nanoparticles was also observed from comparison of K factor (characteristic of the elastomer-liquid interaction). Difference between the characteristics of the two membranes was also reported using this parameter. Besides, diffusion coefficients testified the impact of the membrane thickness on the penetration process, while no significant effect of the nature of the nanoparticle solution can be seen on this coefficient. (paper)

Diffusion of nanoparticles in solution through elastomeric membrane

Science.gov (United States)

Zemzem, Mohamed; Vinches, Ludwig; Hallé, Stéphane

2017-04-01

Diffusion phenomena encountered in mass transfer of liquids play an important role in many technological processes of polymer manufacturing and use. In addition and alongside the notable growth of nanoparticles use, particularly when in suspension in liquid solutions, it has become important to pay some attention to their interactions with polymeric structures. The aim of this work is to evaluate some diffusion parameters of gold nanoparticle solutions as well as of their liquid carrier (water) through elastomeric membranes. Gravimetric method was chosen as the main technique to quantify swelling phenomena and to assess kinetic properties. The dynamic liquid uptake measurements were conducted on gold nanoparticles (5 nm and 50 nm in diameter) in aqueous solutions when brought into contact with two types of nitrile material samples. Results showed that diffusion mechanism of the liquids lies between Fickian and sub-Fickian modes. Slight deviations were noticed with the gold nanoparticle solutions. A growth in liquid interaction with the rubbery structure in presence of the nanoparticles was also observed from comparison of K factor (characteristic of the elastomer-liquid interaction). Difference between the characteristics of the two membranes was also reported using this parameter. Besides, diffusion coefficients testified the impact of the membrane thickness on the penetration process, while no significant effect of the nature of the nanoparticle solution can be seen on this coefficient.

Onychomycosis of Toenails and Post-hoc Analyses with Efinaconazole 10% Solution Once-daily Treatment: Impact of Disease Severity and Other Concomitant Associated Factors on Selection of Therapy and Therapeutic Outcomes.

Science.gov (United States)

Del Rosso, James Q

2016-02-01

Topical treatment for toenail onychomycosis has been fraught with a long-standing reputation of poor efficaey, primarily due to physical properties of the nail unit that impede drug penetration. Newer topical agents have been formulated as Solution, which appear to provide better therapeutic response in properly selected patients. It is important to recognize the impact the effects that mitigating and concomitant factors can have on efficaey. These factors include disease severity, gender, presence of tinea pedis, and diabetes. This article reviews results achieved in Phase 3 pivotal studies with topical efinaconazole 10% Solution applied once daily for 48 weeks with a focus on how the aforementioned factors influenced therapeutic outcomes. It is important for clinicians treating patients for onychomycosis to evaluate severity, treat concomitant tinea pedis, address control of diabetes if present by encouraging involvement of the patient's primary care physician, and consider longer treatment courses when clinically relevant.

Marriage, Abortion, or Unwed Motherhood? How Women Evaluate Alternative Solutions to Premarital Pregnancies in Japan and the United States

Science.gov (United States)

Hertog, Ekaterina; Iwasawa, Miho

2011-01-01

In this article, the authors argue that to understand the very low incidence of outside-of-marriage childbearing in contemporary Japan one needs to take into account perceptions of all possible solutions to a premarital pregnancy: marriage, abortion, and childbearing outside wedlock. To demonstrate the particular impact of these perceptions in…

Thermodynamics of Highly Supersaturated Aqueous Solutions of Poorly Water-Soluble Drugs-Impact of a Second Drug on the Solution Phase Behavior and Implications for Combination Products.

Science.gov (United States)

Trasi, Niraj S; Taylor, Lynne S

2015-08-01

There is increasing interest in formulating combination products that contain two or more drugs. Furthermore, it is also common for different drug products to be taken simultaneously. This raises the possibility of interactions between different drugs that may impact formulation performance. For poorly water-soluble compounds, the supersaturation behavior may be a critical factor in determining the extent of oral absorption. The goal of the current study was to evaluate the maximum achievable supersaturation for several poorly water-soluble compounds alone, and in combination. Model compounds included ritonavir, lopinavir, paclitaxel, felodipine, and diclofenac. The "amorphous solubility" for the pure drugs was determined using different techniques and the change in this solubility was then measured in the presence of differing amounts of a second drug. The results showed that "amorphous solubility" of each component in aqueous solution is substantially decreased by the second component, as long as the two drugs are miscible in the amorphous state. A simple thermodynamic model could be used to predict the changes in solubility as a function of composition. This information is of great value when developing co-amorphous or other supersaturating formulations and should contribute to a broader understanding of drug-drug physicochemical interactions in in vitro assays as well as in the gastrointestinal tract. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

Global Change and Helminth Infections in Grazing Ruminants in Europe: Impacts, Trends and Sustainable Solutions

Directory of Open Access Journals (Sweden)

Hubertus Hertzberg

2013-08-01

Full Text Available Infections with parasitic helminths (nematodes and trematodes represent a significant economic and welfare burden to the global ruminant livestock industry. The increasing prevalence of anthelmintic resistance means that current control programmes are costly and unsustainable in the long term. Recent changes in the epidemiology, seasonality and geographic distribution of helminth infections have been attributed to climate change. However, other changes in environment (e.g., land use and in livestock farming, such as intensification and altered management practices, will also have an impact on helminth infections. Sustainable control of helminth infections in a changing world requires detailed knowledge of these interactions. In particular, there is a need to devise new, sustainable strategies for the effective control of ruminant helminthoses in the face of global change. In this paper, we consider the impact of helminth infections in grazing ruminants, taking a European perspective, and identify scientific and applied priorities to mitigate these impacts. These include the development and deployment of efficient, high-throughput diagnostic tests to support targeted intervention, modelling of geographic and seasonal trends in infection, more thorough economic data and analysis of the impact of helminth infections and greater translation and involvement of end-users in devising and disseminating best practices. Complex changes in helminth epidemiology will require innovative solutions. By developing and using new technologies and models, the use of anthelmintics can be optimised to limit the development and spread of drug resistance and to reduce the overall economic impact of helminth infections. This will be essential to the continued productivity and profitability of livestock farming in Europe and its contribution to regional and global food security.

Extremal solutions of measure differential equations

Czech Academy of Sciences Publication Activity Database

Monteiro, Giselle Antunes; Slavík, A.

2016-01-01

Roč. 444, č. 1 (2016), s. 568-597 ISSN 0022-247X Institutional support: RVO:67985840 Keywords : measure differential equations * extremal solution * lower solution Subject RIV: BA - General Mathematics Impact factor: 1.064, year: 2016 http://www.sciencedirect.com/science/article/pii/S0022247X16302724

Evaluating the "Threshold Theory": Can Head Impact Indicators Help?

Science.gov (United States)

Mihalik, Jason P; Lynall, Robert C; Wasserman, Erin B; Guskiewicz, Kevin M; Marshall, Stephen W

2017-02-01

This study aimed to determine the clinical utility of biomechanical head impact indicators by measuring the sensitivity, specificity, positive predictive value (PV+), and negative predictive value (PV-) of multiple thresholds. Head impact biomechanics (n = 283,348) from 185 football players in one Division I program were collected. A multidisciplinary clinical team independently made concussion diagnoses (n = 24). We dichotomized each impact using diagnosis (yes = 24, no = 283,324) and across a range of plausible impact indicator thresholds (10g increments beginning with a resultant linear head acceleration of 50g and ending with 120g). Some thresholds had adequate sensitivity, specificity, and PV-. All thresholds had low PV+, with the best recorded PV+ less than 0.4% when accounting for all head impacts sustained by our sample. Even when conservatively adjusting the frequency of diagnosed concussions by a factor of 5 to account for unreported/undiagnosed injuries, the PV+ of head impact indicators at any threshold was no greater than 1.94%. Although specificity and PV- appear high, the low PV+ would generate many unnecessary evaluations if these indicators were the sole diagnostic criteria. The clinical diagnostic value of head impact indicators is considerably questioned by these data. Notwithstanding, valid sensor technologies continue to offer objective data that have been used to improve player safety and reduce injury risk.

Engineering report (conceptual design) PFP solution stabilization

Energy Technology Data Exchange (ETDEWEB)

Witt, J.B.

1997-07-17

This Engineering Report (Conceptual Design) addresses remediation of the plutonium-bearing solutions currently in inventory at the Plutonium Finishing Plant (PFP). The recommendation from the Environmental Impact Statement (EIS) is that the solutions be treated thermally and stabilized as a solid for long term storage. For solutions which are not discardable, the baseline plan is to utilize a denitration process to stabilize the solutions prior to packaging for storage.

Engineering report (conceptual design) PFP solution stabilization

International Nuclear Information System (INIS)

Witt, J.B.

1997-01-01

This Engineering Report (Conceptual Design) addresses remediation of the plutonium-bearing solutions currently in inventory at the Plutonium Finishing Plant (PFP). The recommendation from the Environmental Impact Statement (EIS) is that the solutions be treated thermally and stabilized as a solid for long term storage. For solutions which are not discardable, the baseline plan is to utilize a denitration process to stabilize the solutions prior to packaging for storage

The oil industry along the Atlantic coast of Cameroon: assessing impacts and possible solutions

International Nuclear Information System (INIS)

Dieudonne Alemagi

2007-01-01

While the oil industry along the Atlantic coast of Cameroon has made important contributions to the national economy, this has been accompanied with adverse environmental impacts. There has been significant pollution from oil drilling, refinery waste, oil spillage, gas and flaring. After discussing these impacts, this paper argues that prevailing regulations are inadequate and need overhauling. It proposes that cleaner production requires: (i) specific laws to protect dwellers in the neighbourhood of oil refineries, filling stations, service stations and pipelines; (ii) adoption of national standards for levels of industrial effluents, and allocation of sufficient resources for monitoring these standards; (iii) formation of industry-government research partnerships; (iv) the divorcing of gas flaring; and (v) a more comprehensive legislation enabling a robust public participation in environmental impact assessment and nomination of indicators to evaluate corporate environmental management plans. (author)

Conditional cash transfer impact evaluation: an evaluation of the costa rican secondary education program Avancemos

Directory of Open Access Journals (Sweden)

Catherine Mata

2015-07-01

Full Text Available This paper evaluates the impact of Avancemos, a conditional cash transfer program in Costa Rica. Specifically, this paper measures the impact on student desertion for the first year of the program using a panel created with the Household Surveys for Multiple Purposes for the years 2006 and 2007, elaborated by the National Institute of Statistics and Census. Using econometric tools and quasi-experimental methodologies such as Propensity Score Matching and difference-in-differences, we find a positive impact associated to the program for desertion and reinsertion. Specifically, for between 10 and 16 percent of the students who did not leave high school, it was only due to Avancemos, meaning that without the program they would have abandoned their studies. This is why we can conclude that Avancemos had a positive impact according to its planned objectives of preventing dropouts and ensuring their reinsertion.

A counterfactual impact evaluation of a bilingual program on students' grade point average at a spanish university.

Science.gov (United States)

Arco-Tirado, J L; Fernández-Martín, F; Ramos-García, A M; Littvay, L; Villoria, J; Naranjo, J A

2018-02-21

This observational study intends to estimate the causal effects of an English as a Medium of Instruction (EMI) program (as predictor) on students Grade Point Average (GPA) (as outcome) at a particular University in Spain by using a Counterfactual Impact Evaluation (CIE). The need to address the crucial question of causal inferences in EMI programs to produce credible evidences of successful interventions contrasts, however, with the absence of experimental or quasi-experimental research and evaluation designs in the field. CIE approach is emerging as a methodologically viable solution to bridge that gap. The program evaluated here consisted in delivering an EMI program in a Primary Education Teacher Training Degree group. After achieving balance on the observed covariates and recreating a situation that would have been expected in a randomized experiment, three matching approaches such as genetic matching, nearest neighbor matching and Coarsened Exact Matching were used to analyze observational data from a total of 1288 undergraduate students, including both treatment and control group. Results show unfavorable effects of the bilingual group treatment condition. Potential interpretations and recommendations are provided in order to strengthen future causal evidences of bilingual education programs' effectiveness in Higher Education. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Improving environmental impact and cost assessment for supplier evaluation

Science.gov (United States)

Beucker, Severin; Lang, Claus

2004-02-01

Improving a company"s environmental and financial performance necessitates the evaluation of environmental impacts deriving from the production and cost effects of corporate actions. These effects have to be made transparent and concrete targets have to be developed. Such an evaluation has to be done on a regular basis but with limited expenses. To achieve this, different instruments of environmental controlling such as LCA and environmental performance indicators have to be combined with methods from cost accounting. Within the research project CARE (Computer Aided Resource Efficiency Accounting for Medium-Sized Enterprises), the method Resource Efficiency Accounting (REA) is used to give the participating companies new insights into hidden costs and environmental effects of their production and products. The method combines process based cost accounting with environmental impact assessment methodology and offers results that can be integrated into a company"s environmental controlling system and business processes like cost accounting, supplier assessment, etc. Much of the data necessary for the combined assessment can be available within a company"s IT system and therefore can be efficiently used for the assessment process. The project CARE puts a strong focus on the use of company data and information systems for the described assessment process and offers a methodological background for the evaluation and the structuring of such data. Besides the general approach of the project CARE the paper will present results from a case study in which the described approach is used for the evaluation of suppliers.

Evaluating Water Management Practice for Sustainable Mining

Directory of Open Access Journals (Sweden)

Xiangfeng Zhang

2014-02-01

Full Text Available To move towards sustainable development, the mining industry needs to identify better mine water management practices for reducing raw water use, increasing water use efficiency, and eliminating environmental impacts in a precondition of securing mining production. However, the selection of optimal mine water management practices is technically challenging due to the lack of scientific tools to comprehensively evaluate management options against a set of conflicting criteria. This work has provided a solution to aid the identification of more sustainable mine water management practices. The solution includes a conceptual framework for forming a decision hierarchy; an evaluation method for assessing mine water management practices; and a sensitivity analysis in view of different preferences of stakeholders or managers. The solution is applied to a case study of the evaluation of sustainable water management practices in 16 mines located in the Bowen Basin in Queensland, Australia. The evaluation results illustrate the usefulness of the proposed solution. A sensitivity analysis is performed according to preference weights of stakeholders or managers. Some measures are provided for assessing sensitivity of strategy ranking outcomes if the weight of an indicator changes. Finally, some advice is given to improve the mine water management in some mines.

Influencing policy through impact evaluation in Latin America and ...

International Development Research Centre (IDRC) Digital Library (Canada)

And there are growing concerns about the ethics of implementing some types of IE. This paper explores recent IE practice in Latin America and reviews more than 300 impact evaluations in 21 countries. It examines the policy issues covered and methodologies used; the research actors and implementing agencies involved; ...

Accessibility measures: review and applications. Evaluation of accessibility impacts of land-use transportation scenarios, and related social and economic impact

NARCIS (Netherlands)

Geurs KT; Ritsema van Eck JR; Universiteit Utrecht-URU; LAE

2001-01-01

This report describes an extensive literature study and three case studies aimed at reviewing accessibility measures for their ability to evaluate the accessibility impacts of national land-use and transport scenarios, and related social and economic impacts. Several activity- and utility-based

Evaluation of environmental impact produced by different economic activities with the global pollution index.

Science.gov (United States)

Zaharia, Carmen

2012-07-01

The paper analyses the environment pollution state in different case studies of economic activities (i.e. co-generation electric and thermal power production, iron profile manufacturing, cement processing, waste landfilling, and wood furniture manufacturing), evaluating mainly the environmental cumulative impacts (e.g. cumulative impact against the health of the environment and different life forms). The status of the environment (air, water resources, soil, and noise) is analysed with respect to discharges such as gaseous discharges in the air, final effluents discharged in natural receiving basins or sewerage system, and discharges onto the soil together with the principal pollutants expressed by different environmental indicators corresponding to each specific productive activity. The alternative methodology of global pollution index (I (GP)*) for quantification of environmental impacts is applied. Environmental data analysis permits the identification of potential impact, prediction of significant impact, and evaluation of cumulative impact on a commensurate scale by evaluation scores (ES(i)) for discharge quality, and global effect to the environment pollution state by calculation of the global pollution index (I (GP)*). The I (GP)* values for each productive unit (i.e. 1.664-2.414) correspond to an 'environment modified by industrial/economic activity within admissible limits, having potential of generating discomfort effects'. The evaluation results are significant in view of future development of each productive unit and sustain the economic production in terms of environment protection with respect to a preventive environment protection scheme and continuous measures of pollution control.

Evaluating the market transformation impacts of a DSM program in the Province of Quebec

Energy Technology Data Exchange (ETDEWEB)

Baillargeon, P.; Michaud, N. [Econoler, 160 St-Paul Street, Quebec, QC, G1K 3W1 (Canada); Schmitt, B. [Hydro-Quebec, Complexe Desjardins, East Tower, C.P. 10000, Place Desjardins, Montreal, QC, H5B 1H7 (Canada); Megdal, L. [Megdal and Associates, 198 High Street, Acton, MA 01720 (United States)

2012-01-15

In 2006, Hydro-Quebec introduced a large DSM program on the market to promote the adoption of compact fluorescent lamps in Quebec households. After 3 years of program implementation, there was significant indication on the part of market actors that the promotional campaign component was quite effective in transforming the Quebec market. Hydro-Quebec therefore decided to modify its approach to program evaluation to include the quantification of market effects. Econoler led a team including American partners, Opinion Dynamics Inc. and Megdal and Associates to conduct an evaluation of program impacts on market transformation. An evaluation strategy was designed where different research tools would be integrated to determine market evolution over the two previous years. Each research method was used to determine an estimate of program impacts, then triangulated with other approaches to determine the most appropriate impact evaluation method regarding the Hydro-Quebec program. Research efforts included a non-participant survey, interviews at manufacturer headquarters across Canada, interviews with banner distributor representatives across Canada, the collection of sales and market share data from manufacturers and retailers as well as secondary research to identify other players that could influence the market. The evaluation revealed that savings of 168 GWh could be attributed to direct and indirect impacts of the program for the 2006-2007 period.

Creative Solutions and Their Evaluation: Comparing the Effects of Explanation and Argumentation Tasks on Student Reflections

Science.gov (United States)

Andiliou, Andria; Murphy, P. Karen

2014-01-01

Creative problem solving which results in novel and effective ideas or products is most advanced when learners can analyze, evaluate, and refine their ideas to improve creative solutions. The purpose of this investigation was to examine creative problem solving performance in undergraduate students and determine the tasks that support critical…

Welfare Evaluation and the Economic Impacts of Climate Change on ...

International Development Research Centre (IDRC) Digital Library (Canada)

Welfare Evaluation and the Economic Impacts of Climate Change on Water Supply ... In a context of positive economic growth, demand for water is expected to ... Socially equitable climate action is essential to strengthen the resilience of all ...

Unbounded solutions of quasi-linear difference equations

Czech Academy of Sciences Publication Activity Database

Cecchi, M.; Došlá, Zuzana; Marini, M.

2003-01-01

Roč. 45, 10-11 (2003), s. 1113-1123 ISSN 0898-1221 Institutional research plan: CEZ:AV0Z1019905 Keywords : nonlinear difference equation * possitive increasing solution * strongly increasing solution Subject RIV: BA - General Mathematics Impact factor: 0.498, year: 2003

Cloud Computing Benefits for E-learning Solutions

OpenAIRE

Paul POCATILU

2010-01-01

E-learning systems usually require many hardware and software resources. There are many educational institutions that cannot afford such investments, and cloud computing is the best solution. This paper presents the impact on using cloud computing for e-learning solutions.

Development and initial psychometric evaluation of patient-reported outcome questionnaires to evaluate the symptoms and impact of hidradenitis suppurativa.

Science.gov (United States)

Kimball, Alexa B; Sundaram, Murali; Banderas, Benjamin; Foley, Catherine; Shields, Alan L

2018-03-01

Two patient-reported outcome (PRO) questionnaires, the Hidradenitis Suppurativa Symptom Assessment (HSSA) and Hidradenitis Suppurativa Impact Assessment (HSIA), were developed to measure signs, symptoms and impacts of HS in treatment efficacy studies. In accordance with FDA guidelines and published best practices, four stages of research were conducted to create the questionnaires: concept elicitation, questionnaire construction, content evaluation and psychometric evaluation. Subjects (N = 20) who participated in the concept elicitation stage reported 15 unique HS-related signs and symptoms and 51 impacts. Following this, eight sign and symptom concepts and 21 impacts were selected for construction of the HSSA and HSIA, respectively. During content evaluation, cognitive debriefing interviews with HS subjects (N = 20) confirmed subjects could read, comprehend and meaningfully respond to both questionnaires. Modifications made after this stage of work resulted in a nine-item HSSA and a 17-item HSIA. The HSSA and HSIA were subsequently entered into a US-based observational study (N = 40), and the scores produced by each were found to be reliable, construct valid, and able to distinguish among clinically distinct groups. The HSSA and HSIA are content-valid, HS-specific, PRO questionnaires with demonstrated ability to generate reliable, valid scores when administered to patients with HS in a research setting.

Evaluation of trade-offs in costs and environmental impacts for returnable packaging implementation

Science.gov (United States)

Jarupan, Lerpong; Kamarthi, Sagar V.; Gupta, Surendra M.

2004-02-01

The main thrust of returnable packaging these days is to provide logistical services through transportation and distribution of products and be environmentally friendly. Returnable packaging and reverse logistics concepts have converged to mitigate the adverse effect of packaging materials entering the solid waste stream. Returnable packaging must be designed by considering the trade-offs between costs and environmental impact to satisfy manufacturers and environmentalists alike. The cost of returnable packaging entails such items as materials, manufacturing, collection, storage and disposal. Environmental impacts are explicitly linked with solid waste, air pollution, and water pollution. This paper presents a multi-criteria evaluation technique to assist decision-makers for evaluating the trade-offs in costs and environmental impact during the returnable packaging design process. The proposed evaluation technique involves a combination of multiple objective integer linear programming and analytic hierarchy process. A numerical example is used to illustrate the methodology.

Impact of solute concentration on the electrocatalytic conversion of dissolved gases in buffered solutions

KAUST Repository

Shinagawa, Tatsuya; Takanabe, Kazuhiro

2015-01-01

. These alterations of the electrolyte properties associated with the solute concentration are universally applicable to other aqueous gas-related electrochemical reactions because the currents are purely determined by mass transfer of the dissolved gases. © 2015

Decision Network for Blue Green Solutions to Influence Policy Impact Assessments

Science.gov (United States)

Mijic, A.; Theodoropoulos, G.; El Hattab, M. H.; Brown, K.

2017-12-01

Sustainable Urban Drainage Systems (SuDS) deliver ecosystems services that can potentially yield multiple benefits to the urban environment. These benefits can be achieved through optimising SUDS' integration with the local environment and water resources, creating so-called Blue Green Solutions (BGS). The BGS paradigm, however, presents several challenges, in particular quantifying the benefits and creating the scientific evidence-base that can persuade high-level decision-makers and stakeholders to implement BGS at large scale. This work presents the development of the easily implemented and tailored-made approach that allows a robust assessment of the BGS co-benefits, and can influence the types of information that are included in policy impact assessments. The Analytic Network Process approach is used to synthesise the available evidence on the co-benefits of the BGS. The approach enables mapping the interactions between individual BGS selection criteria, and creates a platform to assess the synergetic benefits that arise from components interactions. By working with Government departments and other public and private sector stakeholders, this work has produced a simple decision criteria-based network that will enable the co-benefits and trade-offs of BGS to be quantified and integrated into UK policy appraisals.

Doing good buffers against feeling bad : prosocial impact compensates for negative task and self-evaluations

OpenAIRE

Grant, Adam M.; Sonnentag, Sabine

2010-01-01

Although evidence suggests that negative task and self-evaluations are associated with emotional exhaustion, little research has examined factors that buffer against these affects. We propose that perceived prosocial impact, the experience of helping others, compensates for negative task and self-evaluations by focusing attention on positive outcomes for others. In Study 1, perceived prosocial impact attenuated the associations of low intrinsic motivation and core self-evaluations with emotio...

Third-party online payment solutions in China

OpenAIRE

Yang, Qian

2017-01-01

The topic of this paper is third-party online payment solutions in China and the main purpose of this paper is to figure out the research question: What are the impacts of third-party online payment solutions on China? Generally speaking, the third-party online payment solutions, including mobile payments, usually used by customer who purchase online and usually used in transaction platform. However, in China, people can use third-party payment solutions in different platfor...

Simultaneous removal of iron and manganese of aqueous solutions using as adsorbent a Mexican natural zeolite

International Nuclear Information System (INIS)

Garcia M, A.; Solache R, M. J.; Olguin G, M. T.

2009-01-01

In this work was evaluated the removal capacity of iron and manganese of aqueous solutions using a Mexican natural zeolite. It was observed that the Freundlich pattern describes the adsorption process appropriately and that a competitive effect exists between both metals by the exchange places of the zeolite, when it is starting of solutions that contain to both metals, impacting mainly in the manganese removal. A natural zeolite coming from the Puebla State, Mexico was used. The material was milled and sieved to a mesh size 30 and was conditioned with a solution 0.5 N of sodium chloride. Later on was characterized by means of scanning electron microscopy and X-ray diffraction.

Preparation and evaluation of veterinary 20% injectable solution of tylosin

Directory of Open Access Journals (Sweden)

Fouad K. Mohammad

2010-02-01

Full Text Available A veterinary injectable aqueous solution of the antibiotic tylosin at a concentration of 20% was prepared under aseptic conditions in dark glass bottles each containing 100 ml. The preparation was intended for animal use only. It contained 200 g tylosin tartrate, 500 ml propylene glycol, benzyl alcohol 40 ml as a preservative and water for injection up to 1000 ml. The preparation was clear yellow viscous aqueous solution free from undesired particles. The preparation complied with the requirements for injectable solutions. It was active in vitro against E. coli (JM83. The preparation of 20% tylosin solution was safe under field conditions in treating sheep and cattle suffering from pneumonia at the dose rate of 1 ml/20 kg body weight, intramuscularly/ day for 3 successive days. In conclusion, we presented the know-how of a veterinary formulation of injectable solution of 20% tylosin for clinical use in ruminants. [Vet. World 2010; 3(1.000: 5-7

Evaluation of sprayed hypochlorous acid solutions for their virucidal activity against avian influenza virus through in vitro experiments

Science.gov (United States)

HAKIM, Hakimullah; THAMMAKARN, Chanathip; SUGURO, Atsushi; ISHIDA, Yuki; KAWAMURA, Akinobu; TAMURA, Miho; SATOH, Keisuke; TSUJIMURA, Misato; HASEGAWA, Tomomi; TAKEHARA, Kazuaki

2014-01-01

Hypochlorous acid (HOCl) solutions were evaluated for their virucidal ability against a low pathogenic avian influenza virus (AIV), H7N1. HOCl solutions containing 50, 100 and 200 ppm chlorine (pH 6) or their sprayed solutions (harvested in dishes placed at 1 or 30 cm distance between the spray nozzle and dish) were mixed with the virus with or without organic materials (5% fetal bovine serum: FBS). Under plain diluent conditions (without FBS), harvested solutions of HOCl after spraying could decrease the AIV titer by more than 1,000 times, to an undetectable level (< 2.5 log10TCID50/ml) within 5 sec, with the exception of the 50 ppm solution harvested after spraying at the distance of 30 cm. Under the dirty conditions (in the presence of 5% FBS), they lost their virucidal activity. When HOCl solutions were sprayed directly on the virus on rayon sheets for 10 sec, the solutions of 100 and 200 ppm could inactivate AIV immediately after spraying, while 50 ppm solution required at least 3 min of contact time. In the indirect spray form, after 10 sec of spraying, the lids of the dishes were opened to expose the virus on rayon sheets to HOCl. In this form, the 200 ppm solution inactivated AIV within 10 min of contact, while 50 and 100 ppm could not inactivate it. These data suggest that HOCl can be used in spray form to inactivate AIV at the farm level. PMID:25421399

Evaluation of sprayed hypochlorous acid solutions for their virucidal activity against avian influenza virus through in vitro experiments.

Science.gov (United States)

Hakim, Hakimullah; Thammakarn, Chanathip; Suguro, Atsushi; Ishida, Yuki; Kawamura, Akinobu; Tamura, Miho; Satoh, Keisuke; Tsujimura, Misato; Hasegawa, Tomomi; Takehara, Kazuaki

2015-02-01

Hypochlorous acid (HOCl) solutions were evaluated for their virucidal ability against a low pathogenic avian influenza virus (AIV), H7N1. HOCl solutions containing 50, 100 and 200 ppm chlorine (pH 6) or their sprayed solutions (harvested in dishes placed at 1 or 30 cm distance between the spray nozzle and dish) were mixed with the virus with or without organic materials (5% fetal bovine serum: FBS). Under plain diluent conditions (without FBS), harvested solutions of HOCl after spraying could decrease the AIV titer by more than 1,000 times, to an undetectable level (< 2.5 log10TCID50/ml) within 5 sec, with the exception of the 50 ppm solution harvested after spraying at the distance of 30 cm. Under the dirty conditions (in the presence of 5% FBS), they lost their virucidal activity. When HOCl solutions were sprayed directly on the virus on rayon sheets for 10 sec, the solutions of 100 and 200 ppm could inactivate AIV immediately after spraying, while 50 ppm solution required at least 3 min of contact time. In the indirect spray form, after 10 sec of spraying, the lids of the dishes were opened to expose the virus on rayon sheets to HOCl. In this form, the 200 ppm solution inactivated AIV within 10 min of contact, while 50 and 100 ppm could not inactivate it. These data suggest that HOCl can be used in spray form to inactivate AIV at the farm level.

Investigation of evaluation method for marine radiological impact during an accident

International Nuclear Information System (INIS)

2013-01-01

In 2012, JNES investigated the evaluation method, long-term seawater and marine deposition for release and diffusion to the ocean at the accident, and marine impact assessment code, in Japan and overseas. Also, the foreign regulations for marine radiological impact (direct release to ocean from the facilities and fallout on marine, etc.) were investigated. Furthermore, the index (e.g., intervention level) at emergency control in USA and Europe were investigated. (author)

Investigation of evaluation method for marine radiological impact during an accident

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

In 2012, JNES investigated the evaluation method, long-term seawater and marine deposition for release and diffusion to the ocean at the accident, and marine impact assessment code, in Japan and overseas. Also, the foreign regulations for marine radiological impact (direct release to ocean from the facilities and fallout on marine, etc.) were investigated. Furthermore, the index (e.g., intervention level) at emergency control in USA and Europe were investigated. (author)

Evaluating the impact of image preprocessing on iris segmentation

Directory of Open Access Journals (Sweden)

José F. Valencia-Murillo

2014-08-01

Full Text Available Segmentation is one of the most important stages in iris recognition systems. In this paper, image preprocessing algorithms are applied in order to evaluate their impact on successful iris segmentation. The preprocessing algorithms are based on histogram adjustment, Gaussian filters and suppression of specular reflections in human eye images. The segmentation method introduced by Masek is applied on 199 images acquired under unconstrained conditions, belonging to the CASIA-irisV3 database, before and after applying the preprocessing algorithms. Then, the impact of image preprocessing algorithms on the percentage of successful iris segmentation is evaluated by means of a visual inspection of images in order to determine if circumferences of iris and pupil were detected correctly. An increase from 59% to 73% in percentage of successful iris segmentation is obtained with an algorithm that combine elimination of specular reflections, followed by the implementation of a Gaussian filter having a 5x5 kernel. The results highlight the importance of a preprocessing stage as a previous step in order to improve the performance during the edge detection and iris segmentation processes.

Evaluating the environmental impacts of the energy system: The ENPEP [ENergy and Power Evaluation Program] approach

International Nuclear Information System (INIS)

Hamilton, B.P.; Sapinski, P.F.; Cirillo, R.R.; Buehring, W.A.

1990-01-01

Argonne National Laboratory (ANL) has developed the ENergy and Power Evaluation Program (ENPEP), a PC-based energy planning package intended for energy/environmental analysis in developing countries. The IMPACTS module of ENPEP examines environmental implications of overall energy and electricity supply strategies that can be developed with other ENPEP modules, including ELECTRIC, the International Atomic Energy Agency's Wien Automatic System Planning Package (WASP-III). The paper presents the status and characteristics of a new IMPACTS module that is now under development at ANL. 3 figs

Environmental Impact Section

International Nuclear Information System (INIS)

Anon.

1977-01-01

The Section is concerned with preparation of environmental statements and assessments and development of assessment methodologies for energy technologies. During 1976, activities involved nuclear, fossil, and geothermal energy; this work was supported by the U.S.Army, HUD, US ERDA, and US NRC. Two special studies--one on the effects of power plant intake structures on fish impingement and another on multiple uses of cooling lakes--were completed and should serve as references for future analyses. Two research projects sponsored by NRC--the Unified Transport Approach (UTA) to Power Plant Assessment and the Environmental Monitoring Data Evaluation Study--were continued. The purpose of the UA program is to develop fast-transient, one- and two-dimensional transport models for estimating thermal, radiological, chemical, and biological impacts in complicated water bodies. The impact of public use of various products that contain radioactive isotope is being evaluated. The Environmental Impact Sections assistance to NRC expanded to include assessments of fuel-fabrication facilities being considered for relicensing and two uranium in-situ solution mining facility proposals. The work for HUD comprises an assessment of the first application of MIUS in a new town development. A generic environmental statement was prepared and an environmental monitoring program for the facility was designed

Evaluating the impact of HIA on urban reconstruction decision-making. Who manages whose risks?

International Nuclear Information System (INIS)

Bekker, Marleen P.M.; Putters, Kim; Grinten, Tom E.D. van der

2005-01-01

Practitioners and academic researchers increasingly look to evaluation of health impact assessment (HIA) to improve its practice, its efficiency and its legitimacy. Evaluation is also used to account to policy-makers, who express doubts that the benefits of HIA justify its costs. Until recently evaluation of HIA focused on instrument design and procedures but now the focus needs to shift to analysis of the interaction of HIA and decision-making. Multiple case studies have been applied to identify the conditions in which HIA produces the desired benefits. These studies used analytical concepts derived from the literature on evaluation, knowledge utilization, science of sociology and knowledge management. This paper describes a case study in which the strategic motives of the decision-makers affected the impact of an HIA. This HIA comprised of a quantitative environmental model 'City and Environment' that was used to assess environmental health impacts of an urban reconstruction plan in a Dutch city. The evaluation of the HIA shows that the decision to follow the recommendations of the HIA was part of a damage control strategy. The more HIA goals deviate from the policy problem and the less HIA is embedded in institutional procedures, then the more HIA impact will be subject to strategic decision-making behaviour. Appropriate cognitive and social strategies are needed to avoid 'negative learning' in those the HIA seeks to influence

Evaluation of the cleaner technology programme

DEFF Research Database (Denmark)

Andersen, Mikael Skou; Jørgensen, Ulrik

The report presents an independent evaluation of the Danish development programme for cleaner technology 1986-1989 and of the Action Plan for Cleaner Technology 1990-1992. The evaluation focuses on the results of technology development and implementation projects, on an examination...... of the dissemination of cleaner technology solutions achieved in six industrial branches, and on the overall programme and its effects, in particular environmental impacts, but also results in the form of employment, environmental export, strenghtening of Danish know-how etc....

78 FR 41924 - Privacy Act of 1974; System of Records-Impact Evaluation of Math Professional Development

Science.gov (United States)

2013-07-12

... DEPARTMENT OF EDUCATION Privacy Act of 1974; System of Records--Impact Evaluation of Math... ``Impact Evaluation of Math Professional Development'' (18-13-35). The National Center for Education...-focused math professional development (PD) program on teacher knowledge, teacher practices, and student...

Qualitative Assessment: Evaluating the Impacts of Climate ...

Science.gov (United States)

The South Fork Nooksack River (South Fork) is located in northwest Washington State and is home to nine species of Pacific salmon, including Nooksack early Chinook (aka, spring Chinook salmon), an iconic species for the Nooksack Indian Tribe. The quantity of salmon in the South Fork, especially spring Chinook salmon, has dramatically declined from historic levels, due primarily to habitat degradation from the legacy impacts of various land uses such as commercial forestry, agriculture, flood control, and transportation infrastructure. Segments of the South Fork and some of its tributaries exceed temperature criteria established for the protection of cold-water salmonid populations, and were listed on Washington State’s Clean Water Act (CWA) 303(d) list of impaired waterbodies. High water temperatures in the South Fork are detrimental to fish and other native species that depend on cool, clean, well-oxygenated water. Of the nine salmon species, three have been listed as threatened under the federal Endangered Species Act (ESA) and are of high priority to restoration efforts in the South Fork—spring Chinook salmon, summer steelhead trout, and bull trout. Growing evidence shows that climate change will exacerbate legacy impacts. This qualitative assessment is a comprehensive analysis of climate change impacts on freshwater habitat and Pacific salmon in the South Fork. It also evaluates the effectiveness of restoration tools that address Pacific salmon recovery.

Efficient Solutions for New Homes Case Study: Savannah Gardens

Energy Technology Data Exchange (ETDEWEB)

None

2016-03-15

The Savannah Housing Department is leading sustainable and affordable housing development in Georgia. It partnered with Southface Energy Institute, a member of the U.S. Department of Energy’s Partnership for Home Innovation Building America research team, to seek cost-effective solutions for increasing the energy efficiency of the Savannah Housing Department’s standard single-family home plans in the Savannah Gardens Community. Based on engineering, cost, and constructability analyses, the combined research team chose to pilot two technologies to evaluate efficiency and comfort impacts for homeowners: a heat-pump water heater in an encapsulated attic and an insulated exterior wall sheathing.

Improving methods to evaluate the impacts of plant invasions: lessons from 40 years of research

Science.gov (United States)

Stricker, Kerry Bohl; Hagan, Donald; Flory, S. Luke

2015-01-01

Methods used to evaluate the ecological impacts of biological invasions vary widely from broad-scale observational studies to removal experiments in invaded communities and experimental additions in common gardens and greenhouses. Different methods provide information at diverse spatial and temporal scales with varying levels of reliability. Thus, here we provide a synthetic and critical review of the methods used to evaluate the impacts of plant invasions and provide recommendations for future research. We review the types of methods available and report patterns in methods used, including the duration and spatial scale of studies and plant functional groups examined, from 410 peer-reviewed papers published between 1971 and 2011. We found that there has been a marked increase in papers published on plant invasion impacts since 2003 and that more than half of all studies employed observational methods while impacts of invasive forbs and graminoids while impacts, we argue that longer-term experimental research and more studies that use predictive modelling and evaluate impacts of invasions on ecosystem processes and fauna are needed. Combining broad-scale observational studies with experiments and predictive modelling may provide the most insight into invasion impacts for policy makers and land managers seeking to reduce the effects of plant invasions. PMID:25829379

Evaluation of Polyuria: The Roles of Solute Loading and Water Diuresis.

Science.gov (United States)

Bhasin, Bhavna; Velez, Juan Carlos Q

2016-03-01

Polyuria, defined as daily urine output in excess of 3.0 to 3.5L/d, can occur due to solute or water diuresis. Solute-induced polyuria can be seen in hospitalized patients after a high solute load from exogenous protein administration or following relief of urinary obstruction. Similar clinical scenarios are rarely encountered in the outpatient setting. We describe a case of polyuria due to high solute ingestion and excessive water intake leading to a mixed picture of solute and water diuresis. Restriction of the daily solute load and water intake resulted in complete resolution of polyuria. Determination of the daily excreted urinary osmoles may yield important clues to the cause of polyuria and should be included in the routine workup of polyuria. Copyright © 2016 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

ESF [Exploratory Shaft Facility] impact evaluation report: Volume 2: Final report

International Nuclear Information System (INIS)

1985-08-01

This report assesses the impacts of integrating an Exploratory Shaft Facility (ESF) with a high-level nuclear waste repository in salt. An evaluation to identify integration impacts is described for two specific ESF configurations (Cases 1 and 2) for each of the seven sites. These configurations are an ESF which uses two of the full size repository shafts, and an ESF with one 10-ft and one 22-ft diameter shaft. An evaluation of an ESF configuration (Case 3) with two 12-ft diameter shafts at three of the seven sites is also described. These sites are Deaf Smith, Davis Canyon, and Richton Dome. A fourth evaluation (Case 4) for the Deaf Smith site only, addresses a ''fast track'' subsurface development plan to allow waste emplacement by 1998. A fifth evaluation (Case 5), provides site-specific ES locations, for the three sites included in Case 3, which are supportive of a shaft siting study prepared by ONWI. The report presents development schedules depicting construction activities and time frames commencing with receipt of the repository Construction Authorization and proceeding to initiation of emplacement operations. These schedules are site specific and are presented for each of the five cases

Improved solution for ill-posed linear systems using a constrained optimization ruled by a penalty: evaluation in nuclear medicine tomography

International Nuclear Information System (INIS)

Walrand, Stephan; Jamar, François; Pauwels, Stanislas

2009-01-01

Ill-posed linear systems occur in many different fields. A class of regularization methods, called constrained optimization, aims to determine the extremum of a penalty function whilst constraining an objective function to a likely value. We propose here a novel heuristic way to screen the local extrema satisfying the discrepancy principle. A modified version of the Landweber algorithm is used for the iteration process. After finding a local extremum, a bound is performed to the 'farthest' estimate in the data space still satisfying the discrepancy principle. Afterwards, the modified Landweber algorithm is again applied to find a new local extremum. This bound-iteration process is repeated until a satisfying solution is reached. For evaluation in nuclear medicine tomography, a novel penalty function that preserves the edge steps in the reconstructed solution was evaluated on Monte Carlo simulations and using real SPECT acquisitions as well. Surprisingly, the first bound always provided a significantly better solution in a wide range of statistics

Red-impact project: First results of the evaluations of the impact of P and T on geological disposal

International Nuclear Information System (INIS)

Marivoet, Jan; Vokal, Antonin; Gudowski, Waclaw

2006-01-01

The Red-Impact project (Impact of partitioning, transmutation and waste reduction technologies on the final nuclear waste disposal) is a research project in the 6. Framework Programme of the European Commission. The main objective of the project is to assess the impact of partitioning and transmutation (P and T) on geological disposal and waste management. The project started with the identification of a number of representative fuel cycle scenarios. Five basis scenarios are considered for the evaluations: 2 industrial scenarios and 3 innovative scenarios. Mass flow schemes have been prepared for each basis fuel cycle scenario and the corresponding neutronic calculations have been made. A first list of performance indicators that will be calculated or estimated in the project has been prepared. As a first step the impact of 2 fuel cycle scenarios, the reference 'open cycle' scenario and of the innovative 'fast neutron Gen IV' scenario, on geological repositories in granite and clay formations have been evaluated. The results obtained show that the introduction of innovative fuel cycle scenarios can result in a considerable reduction of the needed size of the geological repository. However, the impact on the radiological consequences is rather limited. Indeed, the maximum dose, which is expected to occur a few tens of thousands year after the disposal of the waste, is essentially due to fission products and their amount is about proportional to the heat generated by nuclear fissions. (authors)

Method of impact evaluation of storage sites for uranium ore tailings

International Nuclear Information System (INIS)

Servant, A.C.; Cessac, B.

2001-11-01

Mining and ore processing generate liquid effluents and solid waste ( tailings) in important quantities. On fifty years exploitation, 50 millions tons of tailings have been stored on twenty sites in France. From a radiological point of view, the uranium tailings contain only natural radioisotopes, daughters of 238 U and 235 U families and for a low part daughter's of 232 Th family. Their activity stay low to very low, under the ore activity. It decreases very slowly because of the long period of some radionuclides ( 230 Th, 75 000 years, 226 Ra, 1600 years). generally stored on the exploitation site, these tailings constitute a radiological source term of which it is necessary to evaluate the impact on man and environment. At close-down of an uranium ore exploitation site, the operator is required to give to the prefect of his region a file of rehabilitation with the dispositions to take to limit the radiological impact of the storage. It is in this frame that the direction of pollutions and risks prevention (D.P.P.R.) from the Minister of Territory landscaping and the Institute of protection and nuclear safety (I.R.S.N.) established a convention, reference 56/2000, relative to investigations in matter of radiological impact evaluation of uranium tailings storage sites, in order to supply a document allowing to judge the pertinence of the different files made by Cogema in the frame of tailings storage of uranium ore processing. The present document constitutes the report planned at the 3. article ( 3. paragraph) of the convention. It gives the information necessary to the evaluation of impact studies for the sites in question. (N.C.)

Quantitative Evaluation of Acetaminophen in Oral Solutions by Dispersive Raman Spectroscopy for Quality Control

OpenAIRE

Borio, Viviane G.; Vinha, RubensJr.; Nicolau, Renata A.; de Oliveira, Hueder Paulo M.; de Lima, Carlos J.; Silveira, LandulfoJr.

2012-01-01

This work used dispersive Raman spectroscopy to evaluate acetaminophen in commercially available formulations as an analytical methodology for quality control in the pharmaceutical industry. Raman spectra were collected using a near-infrared dispersive Raman spectrometer (830 nm, 50 mW, 20 s exposure time) coupled to a fiber optic probe. Solutions of acetaminophen diluted in excipient (70 to 120% of the commercial concentration of 200 mg/mL) were used to develop a calibration model based on p...

Impact of electrochemical treatment of soil washing solution on PAH degradation efficiency and soil respirometry.

Science.gov (United States)

Mousset, Emmanuel; Huguenot, David; van Hullebusch, Eric D; Oturan, Nihal; Guibaud, Gilles; Esposito, Giovanni; Oturan, Mehmet A

2016-04-01

The remediation of a genuinely PAH-contaminated soil was performed, for the first time, through a new and complete investigation, including PAH extraction followed by advanced oxidation treatment of the washing solution and its recirculation, and an analysis of the impact of the PAH extraction on soil respirometry. The study has been performed on the remediation of genuine PAH-contaminated soil, in the following three steps: (i) PAH extraction with soil washing (SW) techniques, (ii) PAH degradation with an electro-Fenton (EF) process, and (iii) recirculation of the partially oxidized effluent for another SW cycle. The following criteria were monitored during the successive washing cycles: PAH extraction efficiency, PAH oxidation rates and yields, extracting agent recovery, soil microbial activity, and pH of soil. Two representative extracting agents were compared: hydroxypropyl-beta-cyclodextrin (HPCD) and a non-ionic surfactant, Tween(®) 80. Six PAH with different numbers of rings were monitored: acenaphthene (ACE), phenanthrene (PHE), fluoranthene (FLA), pyrene (PYR), benzo(a)pyrene (BaP), and benzo(g,h,i)perylene (BghiP). Tween(®) 80 showed much better PAH extraction efficiency (after several SW cycles) than HPCD, regardless of the number of washing cycles. Based on successive SW experiments, a new mathematical relation taking into account the soil/water partition coefficient (Kd*) was established, and could predict the amount of each PAH extracted by the surfactant with a good correlation with experimental results (R(2) > 0.975). More HPCD was recovered (89%) than Tween(®) 80 (79%), while the monitored pollutants were completely degraded (>99%) after 4 h and 8 h, respectively. Even after being washed with partially oxidized solutions, the Tween(®) 80 solutions extracted significantly more PAH than HPCD and promoted better soil microbial activity, with higher oxygen consumption rates. Moreover, neither the oxidation by-products nor the acidic media (p

Evaluation of the impact of sodium lauryl sulfate source variability on solid oral dosage form development.

Science.gov (United States)

Qiang, Dongmei; Gunn, Jocelyn A; Schultz, Leon; Li, Z Jane

2010-12-01

The objective of this study was to investigate the effects of sodium lauryl sulfate (SLS) from different sources on solubilization/wetting, granulation process, and tablet dissolution of BILR 355 and the potential causes. The particle size distribution, morphology, and thermal behaviors of two pharmaceutical grades of SLS from Spectrum and Cognis were characterized. The surface tension and drug solubility in SLS solutions were measured. The BILR 355 tablets were prepared by a wet granulation process and the dissolution was evaluated. The critical micelle concentration was lower for Spectrum SLS, which resulted in a higher BILR 355 solubility. During wet granulation, less water was required to reach the same end point using Spectrum than Cognis SLS. In general, BILR 355 tablets prepared with Spectrum SLS showed a higher dissolution than the tablets containing Cognis SLS. Micronization of SLS achieved the same improved tablet dissolution as micronized active pharmaceutical ingredient. The observed differences in wetting and solubilization were likely due to the different impurity levels in SLS from two sources. This study demonstrated that SLS from different sources could have significant impact on wet granulation process and dissolution. Therefore, it is critical to evaluate SLS properties from different suppliers, and then identify optimal formulation and process parameters to ensure robustness of drug product manufacture process and performance.

Guide for Conducting Benefit-Cost Evaluation of Realized Impacts of Public R&D Programs

Energy Technology Data Exchange (ETDEWEB)

Ruegg, Rosalie [TIA Consulting, Inc., Emerald Isle, NC (United States); Jordan, Gretchen B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2011-08-01

This document provides guidance for evaluators who conduct impact assessments to determine the “realized” economic benefits and costs, energy, environmental benefits, and other impacts of the Office of Energy Efficiency and Renewable Energy’s (EERE) R&D programs. The focus of this Guide is on realized outcomes or impacts of R&D programs actually experienced by American citizens, industry, and others. Retrospective evaluations may be contrasted to prospective evaluations that reflect expected or potential outcomes only if assumptions hold. The retrospective approach described in this Guide is based on realized results only and the extent they can be attributed to the efforts of an R&D program. While it has been prepared specifically to guide retrospective benefit-cost analysis of EERE R&D Programs, this report may be used for similar analysis of other public R&D organizations.

An Evaluation Framework for Sustaining the Impact of Educational Development

Science.gov (United States)

Hashimoto, Kazuaki; Pillay, Hitendra; Hudson, Peter

2010-01-01

Notwithstanding significant efforts by international aid agencies, aid ineffectiveness became apparent in 1990s as the impact of continued development intervention did not endure the expected outcomes. Conventional monitoring and evaluation by those agencies is critiqued for focusing on measuring project outcomes and giving little attention to…

Hydrophilization of graphite using plasma above/in a solution

Science.gov (United States)

Hoshino, Shuhei; Kawahara, Kazuma; Takeuchi, Nozomi

2018-01-01

A hydrophilization method for graphite is required for applications such as conductive ink. In typical chemical oxidation methods for graphite have the problems of producing many defects in graphite and a large environmental impact. In recent years, the plasma treatment has attracted attention because of the high quality of the treated samples and the low environmental impact. In this study, we proposed an above-solution plasma treatment with a high contact probability of graphite and plasma since graphite accumulates on the solution surface due to its hydrophobicity, which we compared with a so-called solution plasma treatment. Graphite was hydrophilized via reactions with OH radicals generated by the plasma. It was confirmed that hydroxyl and carboxyl groups were modified to the graphite and the dispersibility was improved. The above-solution plasma achieved more energy-efficient hydrophilization than the solution plasma and it was possible to enhance the dispersibility by increasing the plasma-solution contact area.

A probabilistic approach for evaluation of load time history of an aircraft impact

International Nuclear Information System (INIS)

Zorn, N.F.; Schueller, G.I.; Riera, J.D.

1981-01-01

In the context of an overall structural realiability study for a containment located in the F.R. Germany the external load case aircraft impact is investigated. Previous investigations have been based on deterministic evaluations of the load time history. However, a close analysis of the input parameters, such as the mass distribution, the stiffness of the aircraft, the impact velocity and the impact angle reveal their random properties. This in turn leads to a stochastic load time history the parameters of which have been determined in this study. In other words, the randomness of the input parameters are introduced in the calculation of the load time history and their influence with regard to the load magnitude and frequency content is determined. The statistical parameters such as the mean values and the standard deviation of the mechanical properties are evaluated directly from the design plans of the manufacturer for the aircraft Phantom F4-F. This includes rupture loads, mass distributions etc.. The probability distributions of the crash velocity and impact angle are based on a thorough statistical evaluation of the crash histories of the airplane under consideration. Reference was made only to crashes which occurred in the F.R. Germany. (orig.)

Learning from one another: evaluating the impact of horizontal knowledge exchange for environmental management and governance

Directory of Open Access Journals (Sweden)

Céline Tschirhart

2016-06-01

Full Text Available There is increasing advocacy for inclusive community-based approaches to environmental management, and growing evidence that involving communities improves the sustainability of social-ecological systems. Most community-based approaches rely on partnerships and knowledge exchange between communities, civil society organizations, and professionals such as practitioners and/or scientists. However, few models have actively integrated more horizontal knowledge exchange from community to community. We reflect on the transferability of community owned solutions between indigenous communities by exploring challenges and achievements of community peer-to-peer knowledge exchange as a way of empowering communities to face up to local environmental and social challenges. Using participatory visual methods, indigenous communities of the North Rupununi (Guyana identified and documented their community owned solutions through films and photostories. Indigenous researchers from this community then shared their solutions with six other communities that faced similar challenges within Guyana, Suriname, Venezuela, Colombia, French Guiana, and Brazil. They were supported by in-country civil society organizations and academics. We analyzed the impact of the knowledge exchange through interviews, field reports, and observations. Our results show that indigenous community members were significantly more receptive to solutions emerging from, and communicated by, other indigenous peoples, and that this approach was a significant motivating force for galvanizing communities to make changes in their community. We identified a range of enabling factors, such as building capacity for a shared conceptual and technical understanding, that strengthens the exchange between communities and contributes to a lasting impact. With national and international policy-makers mobilizing significant financial resources for biodiversity conservation and climate change mitigation, we argue

Evaluation of Harmonics Impact on Digital Relays

Directory of Open Access Journals (Sweden)

Kinan Wannous

2018-04-01

Full Text Available This paper presents the concept of the impact of harmonic distortion on a digital protection relay. The aim is to verify and determine the reasons of a mal-trip or failure to trip the protection relays; the suggested solution of the harmonic distortion is explained by a mathematical model in the Matlab Simulink programming environment. The digital relays have been tested under harmonic distortions in order to verify the function of the relays algorithm under abnormal conditions. The comparison between the protection relay algorithm under abnormal conditions and a mathematical model in the Matlab Simulink programming environment based on injected harmonics of high values is provided. The test is separated into different levels; the first level is based on the harmonic effect of an individual harmonic and mixed harmonics. The test includes the effect of the harmonics in the location of the fault point into distance protection zones. This paper is a new proposal in the signal processing of power quality disturbances using Matlab Simulink and the power quality impact on the measurements of the power system quantities; the test simulates the function of protection in power systems in terms of calculating the current and voltage values of short circuits and their faults. The paper includes several tests: frequency variations and decomposition of voltage waveforms with Fourier transforms (model and commercial relay, the effect of the power factor on the location of fault points, the relation between the tripping time and the total harmonic distortion (THD levels in a commercial relay, and a comparison of the THD capture between the commercial relay and the model.

14 CFR 1216.205 - Procedures for evaluating NASA actions impacting floodplains and wetlands.

Science.gov (United States)

2010-01-01

... shall be made at the earliest practicable stage of advance planning, such as during facilities master... step in the evaluation process and will normally be accomplished using only the appropriate Single... other adverse impacts. (i) The basic criteria to be used in determining the impacts of the various...

Energy-Water System Solutions | Energy Analysis | NREL

Science.gov (United States)

System Solutions Energy-Water System Solutions NREL has been a pioneer in the development of energy -water system solutions that explicitly address and optimize energy-water tradeoffs. NREL has evaluated energy-water system solutions for Department of Defense bases, islands, communities recovering from

Impact of application of bio-amniotic membrane immersed in 5-fluorouracil solution in trabeculectomy on rabbit retina

Directory of Open Access Journals (Sweden)

Chenming Zhang

2013-01-01

Full Text Available Background : To observe the impact of application of bio-amniotic membrane immersed in 5-fluorouracil solution in trabeculectomy on the retina in a rabbit model. Materials and Methods : Healthy white New Zealand rabbits were randomly assigned into three groups with 20 in each group. Bio-amniotic membranes of 4 × 5 mm immersed in either physiological saline/water for 10 min, or 25 mg/mL 5-fluorouracil solution for 5 and 10 min, respectively, were applied on rabbit eyes during trabeculectomy. At 7, 14, 21, and 28 days of postoperation, five rabbits from each group were examined with electroretinogram (ERG. After being examined for eye pressure and bleb morphology, rabbits were sacrificed by air embolism and their retinas were collected and examined by transmission electron microscopy (TEM. In addition, 5-fluorouracil amount in bio-amniotic membranes was measured using high-performance liquid chromatography. Results: Each bio-amniotic membrane could absorb 59.004 μg and 75.828 μg 5-fluorouracil after being immersed in 5-fluorouracil solution for 5 and 10 min, respectively. Application of these bio-amniotic membranes in trabeculectomy could promote the formation of well-functioning bleb and maintain intraocular pressure, although it had no effect on retina structures as examined with ERG and TEM. Conclusion: Application of 5-FU soaked bio-amniotic membrane in rabbit eye trabeculectomy is effective and safe.

A systematic review evaluating the impact of task shifting on access ...

African Journals Online (AJOL)

A systematic review evaluating the impact of task shifting on access to antiretroviral therapy in sub-Saharan Africa. ... Background: Task shifting, defined for this review as the shifting of ART initiation and ... AJOL African Journals Online.

Made in Denmark 2014 - Evaluation of Spectator Experience and Tourism Economic Impacts

DEFF Research Database (Denmark)

Toft, Henrik; Zahle Østergaard, Mads

2015-01-01

This report is a translation of the impact analysis of the golf tournament, Made in Denmark, which was held in August 2014. The content of the report is divided into two sub-parts. The first part is an analysis of the spectator experience and how well the experience of being at this event was ass...... was asssessed by the spectators. The second part is a tourism economic impact analysis which purpose is to analyse, evaluate and assess the economic impact this event had on the local area where it was held....

An Application of the Impact Evaluation Process for Designing a Performance Measurement and Evaluation Framework in K-12 Environments

Science.gov (United States)

Guerra-Lopez, Ingrid; Toker, Sacip

2012-01-01

This article illustrates the application of the Impact Evaluation Process for the design of a performance measurement and evaluation framework for an urban high school. One of the key aims of this framework is to enhance decision-making by providing timely feedback about the effectiveness of various performance improvement interventions. The…

Soil solution extraction techniques for microbial ecotoxicity testing: a comparative evaluation.

Science.gov (United States)

Tiensing, T; Preston, S; Strachan, N; Paton, G I

2001-02-01

The suitability of two different techniques (centrifugation and Rhizon sampler) for obtaining the interstitial pore water of soil (soil solution), integral to the ecotoxicity assessment of metal contaminated soil, were investigated by combining chemical analyses and a luminescence-based microbial biosensor. Two different techniques, centrifugation and Rhizon sampler, were used to extract the soil solution from Insch (a loamy sand) and Boyndie (a sandy loam) soils, which had been amended with different concentrations of Zn and Cd. The concentrations of dissolved organic carbon (DOC), major anions (F- , CI-, NO3, SO4(2-)) and major cations (K+, Mg2+, Ca2+) in the soil solutions varied depending on the extraction technique used. Overall, the concentrations of Zn and Cd were significantly higher in the soil solution extracted using the centrifugation technique compared with that extracted using the Rhizon sampler technique. Furthermore, the differences observed between the two extraction techniques depended on the type of soil from which the solution was being extracted. The luminescence-based biosensor Escherichia coli HB101 pUCD607 was shown to respond to the free metal concentrations in the soil solutions and showed that different toxicities were associated with each soil, depending on the technique used to extract the soil solution. This study highlights the need to characterise the type of extraction technique used to obtain the soil solution for ecotoxicity testing in order that a representative ecotoxicity assessment can be carried out.

Evaluation of the impact on the environment of thermal power plant releases

International Nuclear Information System (INIS)

Roussel, C.; Bertrand, R.; Garnier, G.; Berard, P.; Archimbaud, M.

1983-01-01

The aim of this study is to compare the impact on the environment of oil and coal fired power plants, and of nuclear plants. The impact is evaluated by the level of the air pollution around the plant. But the selected pollutants (Sulfur oxides, Nitrogen oxides, Trace elements, organic compounds) are not specific of the pollution produced by the power plant. Therefore, we measured the specific emission of the plant by a continuous sampling in the stack gases. To evaluate the contribution of the plant to the global pollution, a series of diffusion tests was run to measure the atmospheric transfer between the stack and the monitoring system. Sulfur hexafluoride (SF6) was added to the stack plume and its concentration was measured in the environment continuously at the monitoring stations, and by a mobile network for tracing the movement of the plume due to a shift in wind direction. Thereby the impact of other sources could be estimated [fr

Identifying and assessing strategies for evaluating the impact of mobile eye health units on health outcomes.

Science.gov (United States)

Fu, Shiwan; Turner, Angus; Tan, Irene; Muir, Josephine

2017-12-01

To identify and assess strategies for evaluating the impact of mobile eye health units on health outcomes. Systematic literature review. Worldwide. Peer-reviewed journal articles that included the use of a mobile eye health unit. Journal articles were included if outcome measures reflected an assessment of the impact of a mobile eye health unit on health outcomes. Six studies were identified with mobile services offering diabetic retinopathy screening (three studies), optometric services (two studies) and orthoptic services (one study). This review identified and assessed strategies in existing literature used to evaluate the impact of mobile eye health units on health outcomes. Studies included in this review used patient outcomes (i.e. disease detection, vision impairment, treatment compliance) and/or service delivery outcomes (i.e. cost per attendance, hospital transport use, inappropriate referrals, time from diabetic retinopathy photography to treatment) to evaluate the impact of mobile eye health units. Limitations include difficulty proving causation of specific outcome measures and the overall shortage of impact evaluation studies. Variation in geographical location, service population and nature of eye care providers limits broad application. © 2017 National Rural Health Alliance Inc.

Evaluating the effectiveness of impact assessment instruments: Theorising the nature and implications of their political constitution

International Nuclear Information System (INIS)

Cashmore, Matthew; Richardson, Tim; Hilding-Ryedvik, Tuija; Emmelin, Lars

2010-01-01

The central role of impact assessment instruments globally in policy integration initiatives has been cemented in recent years. Associated with this trend, but also reflecting political emphasis on greater accountability in certain policy sectors and a renewed focus on economic competitiveness in Western countries, demand has increased for evidence that these instruments are effective (however defined). Resurgent interest in evaluation has not, however, been accompanied by the conceptual developments required to redress longstanding theoretical problems associated with such activities. In order to sharpen effectiveness evaluation theory for impact assessment instruments this article critically examines the neglected issue of their political constitution. Analytical examples are used to concretely explore the nature and significance of the politicisation of impact assessment. It is argued that raising awareness about the political character of impact assessment instruments, in itself, is a vital step in advancing effectiveness evaluation theory. Broader theoretical lessons on the framing of evaluation research are also drawn from the political analysis. We conclude that, at least within the contemporary research context, learning derived from analysing the meaning and implications of plural interpretations of effectiveness represents the most constructive strategy for advancing impact assessment and policy integration theory.

Evaluating and interpreting cross-taxon congruence: Potential pitfalls and solutions

Science.gov (United States)

Gioria, Margherita; Bacaro, Giovanni; Feehan, John

2011-05-01

Characterizing the relationship between different taxonomic groups is critical to identify potential surrogates for biodiversity. Previous studies have shown that cross-taxa relationships are generally weak and/or inconsistent. The difficulties in finding predictive patterns have often been attributed to the spatial and temporal scales of these studies and on the differences in the measure used to evaluate such relationships (species richness versus composition). However, the choice of the analytical approach used to evaluate cross-taxon congruence inevitably represents a major source of variation. Here, we described the use of a range of methods that can be used to comprehensively assess cross-taxa relationships. To do so, we used data for two taxonomic groups, wetland plants and water beetles, collected from 54 farmland ponds in Ireland. Specifically, we used the Pearson correlation and rarefaction curves to analyse patterns in species richness, while Mantel tests, Procrustes analysis, and co-correspondence analysis were used to evaluate congruence in species composition. We compared the results of these analyses and we described some of the potential pitfalls associated with the use of each of these statistical approaches. Cross-taxon congruence was moderate to strong, depending on the choice of the analytical approach, on the nature of the response variable, and on local and environmental conditions. Our findings indicate that multiple approaches and measures of community structure are required for a comprehensive assessment of cross-taxa relationships. In particular, we showed that selection of surrogate taxa in conservation planning should not be based on a single statistic expressing the degree of correlation in species richness or composition. Potential solutions to the analytical issues associated with the assessment of cross-taxon congruence are provided and the implications of our findings in the selection of surrogates for biodiversity are discussed.

Evaluation of Impact Resistance of Concrete Overpack of Storage Cask

Energy Technology Data Exchange (ETDEWEB)

Lee, Sanghoon; Kim, Ki-Young; Jeon, Je-Eon; Seo, Ki-Seog [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-05-15

The concrete overpack of the cask provides radiation shielding as well as physical protection for inner canister against external mechanical shock. When the overpack undergoes a severe missile impact which might be caused by tornado or aircraft crash, it should sustain minimal level of structural integrity so that the radiation shielding and the retrievability of canister are maintained. Empirical formulas have been developed for the evaluation of concrete damage but those formulas can be used only for local damage evaluation and not for global damage evaluation. In this research, a series of numerical simulations and tests have been performed to evaluate the damage of two types of concrete overpack segment models under high speed missile impact. It is shown that appropriate modeling of material failure is crucial in this kind of analyses and finding the correct failure parameters may not be straightforward. When comparing the simulation results with the test results, it is shown that neither setting, case 1 and 2 provides results with consistent agreement with test results. That is, case 1 setting is more close to reality in Type 1 model analysis, but for Type 2, case 2 setting provides more close results to the reality. In both the case, not enough deformation is predicted by simulation compared to the tests. Weak failure and eroding criteria give larger penetration depth with insufficient overall damage due to energy loss with element erosion.

Youth Empowerment Solutions: Evaluation of an After-School Program to Engage Middle School Students in Community Change

Science.gov (United States)

Zimmerman, Marc A.; Eisman, Andria B.; Reischl, Thomas M.; Morrel-Samuels, Susan; Stoddard, Sarah; Miller, Alison L.; Hutchison, Pete; Franzen, Susan; Rupp, Laney

2018-01-01

We report on an effectiveness evaluation of the Youth Empowerment Solutions (YES) program. YES applies empowerment theory to an after-school program for middle school students. YES is an active learning curriculum designed to help youth gain confidence in themselves, think critically about their community, and work with adults to create positive…

Super-Efficient Refrigerator Program (SERP) evaluation volume 2: Preliminary impact and market transformation assessment

Energy Technology Data Exchange (ETDEWEB)

Lee, A.D.; Conger, R.L.

1996-08-01

The Super Efficient Refrigerator Program (SERP) is a collaborative utility program intended to transform the market for energy-efficient and environmentally friendly refrigerators. It is one of the first examples of a large-scale {open_quotes}market transformation{close_quotes} energy efficiency program. This report documents the preliminary impact and market transformation evaluation of SERP ({open_quotes}the Program{close_quotes}). Pacific Northwest National Laboratory (PNNL) conducted this evaluation for the U.S. Department of Energy. This study focuses on the preliminary impact evaluation and market transformation assessment, but also presents limited process evaluation information. It is based on interviews with refrigerator dealers and manufacturers, interviews with utility participants, industry data, and information from the Program administrators. Results from this study complement those from prior process evaluation also conducted by PNNL. 42 refs., 5 figs., 4 tabs.

Determination of acid ionization constants for weak acids by osmometry and the instrumental analysis self-evaluation feedback approach to student preparation of solutions

Science.gov (United States)

Kakolesha, Nyanguila

Analysis from fall 1998 through spring 2001. Surveys eliciting students' reactions to the instrument feedback approach showed an overwhelmingly positive response. The results of this research demonstrated that self-evaluation with instrumental feedback was a useful tool in helping students apply the knowledge they have acquired in lectures to the practice of chemistry. A demographic survey to determine whether part-time or full-time jobs had a negative impact on their experiment grades showed a small but significant correlation between hours worked and grade earned. However, the study showed that grades students earned on this experiment were predictive of overall semester lab grades.

Measure a carbon impact methodology in line with a 2 degree scenario

International Nuclear Information System (INIS)

Coeslier, Manuel; Finidori, Esther; Smia, Ladislas

2015-11-01

Today, high expectations surround the measurement of carbon impact. Voluntary initiatives and - little by little - legislation push institutional investors to consider the impact that financial portfolios have on the climate and energy transition. However, current methods (of carbon footprint measurement) are not adequate to determine an investment portfolio's contribution to these issues. Current approaches, which do not take a life-cycle vision of carbon foot-printing, have the particular flaw of not accounting for emissions related to companies' products and services. The impact of these products and services on the climate is, however, crucial in many sectors - whether positively in the case of renewable energy and energy efficiency solutions, or negatively in the case of fossil fuels. Following this observation, Mirova and Carbone 4 decided to create a partnership dedicated to developing a new methodology capable of providing a carbon measurement that is aligned with the issues of energy transition: Carbon Impact Analytics (CIA). The CIA methodology focuses primarily on three indicators: - A measure of emissions 'induced' by a company's activity from a life-cycle approach, taking into account direct emissions as well as emissions from product suppliers; - A measure of the emissions which are 'avoided' due to efficiency efforts or deployment of 'low-carbon' solutions; - An overall evaluation that takes into account, in addition to carbon measurement, further information on the company's evolution and the type of capital or R and D expenditures. For these evaluations, the methodology employs a bottom-up approach in which each company is examined individually according to an evaluation framework adapted to each sector. Particular scrutiny is devoted to companies with a significant climate impact: energy producers, carbon-intensive sectors (industry, construction, transport), and providers of low-carbon equipment and solutions. Evaluations are then aggregated at

Reflecting on an impact evaluation of the Grade R programme: Method, results and policy responses

Directory of Open Access Journals (Sweden)

Marie-Louise Samuels

2015-08-01

Full Text Available This paper describes the expansion since 2001 of a public pre-school programme in South Africa known as ‘Grade R’, summarises the findings from an impact evaluation of the introduction of Grade R, discusses the policy recommendations flowing from the evaluation and reflects on the process of implementing the recommendations. The Grade R programme has expanded dramatically, to the point where participation is nearly universal. Although a substantial literature points to large potential benefits from pre-school educational opportunities, the impact evaluation reported on in this article demonstrated that the Grade R programme, as implemented until 2011, had a limited impact on later educational outcomes. Improving the quality of Grade R, especially in schools serving low socio-economic status communities, thus emerges as a key policy imperative. Recommended responses include professionalising Grade R teachers, providing practical in-service support, increasing access to appropriate storybooks, empowering teachers to assess the development of their learners, and improving financial record-keeping of Grade R expenditure by provincial education departments. The impact evaluation was initiated by the Department of Planning, Monitoring and Evaluation (DPME and the Department of Basic Education (DBE, and was conducted by independent researchers. The move towards increased evaluation of key government programmes is important for shifting the focus of programme managers and policymakers towards programme outcomes rather than only programme inputs. Yet the process is not without its challenges: following a clear process to ensure the implementation of the lessons learned from such an evaluation is not necessarily straightforward.

Evaluation of the Impact of Media Marketing Strategies on Continuing Education Enrollments. AIR Forum 1982 Paper.

Science.gov (United States)

Campbell, Jill F.; Spiro, Louis M.

The impact of media marketing strategies on continuing education enrollment at the State University of New York College at Brockport (SUNY-CB), was evaluated. The evaluation of advertising impacts used advertising records of SUNY-CB and other area colleges and a telephone questionnaire instrument. A stratified, random countywide sample, in…

Impact of electrochemical treatment of soil washing solution on PAH degradation efficiency and soil respirometry

International Nuclear Information System (INIS)

Mousset, Emmanuel; Huguenot, David; Hullebusch, Eric D. van; Oturan, Nihal; Guibaud, Gilles; Esposito, Giovanni; Oturan, Mehmet A.

2016-01-01

The remediation of a genuinely PAH-contaminated soil was performed, for the first time, through a new and complete investigation, including PAH extraction followed by advanced oxidation treatment of the washing solution and its recirculation, and an analysis of the impact of the PAH extraction on soil respirometry. The study has been performed on the remediation of genuine PAH-contaminated soil, in the following three steps: (i) PAH extraction with soil washing (SW) techniques, (ii) PAH degradation with an electro-Fenton (EF) process, and (iii) recirculation of the partially oxidized effluent for another SW cycle. The following criteria were monitored during the successive washing cycles: PAH extraction efficiency, PAH oxidation rates and yields, extracting agent recovery, soil microbial activity, and pH of soil. Two representative extracting agents were compared: hydroxypropyl-beta-cyclodextrin (HPCD) and a non-ionic surfactant, Tween"® 80. Six PAH with different numbers of rings were monitored: acenaphthene (ACE), phenanthrene (PHE), fluoranthene (FLA), pyrene (PYR), benzo(a)pyrene (BaP), and benzo(g,h,i)perylene (BghiP). Tween"® 80 showed much better PAH extraction efficiency (after several SW cycles) than HPCD, regardless of the number of washing cycles. Based on successive SW experiments, a new mathematical relation taking into account the soil/water partition coefficient (Kd*) was established, and could predict the amount of each PAH extracted by the surfactant with a good correlation with experimental results (R"2 > 0.975). More HPCD was recovered (89%) than Tween"® 80 (79%), while the monitored pollutants were completely degraded (>99%) after 4 h and 8 h, respectively. Even after being washed with partially oxidized solutions, the Tween"® 80 solutions extracted significantly more PAH than HPCD and promoted better soil microbial activity, with higher oxygen consumption rates. Moreover, neither the oxidation by-products nor the acidic media (p

Evaluating environmental impacts of contrasting pig farming systems with life cycle assessment.

Science.gov (United States)

Dourmad, J Y; Ryschawy, J; Trousson, T; Bonneau, M; Gonzàlez, J; Houwers, H W J; Hviid, M; Zimmer, C; Nguyen, T L T; Morgensen, L

2014-12-01

Environmental impacts of 15 European pig farming systems were evaluated in the European Union Q-PorkChains project using life cycle assessment. One conventional and two non-conventional systems were evaluated from each of the five countries: Denmark, The Netherlands, Spain, France and Germany. The data needed for calculations were obtained from surveys of 5 to 10 farms from each system. The systems studied were categorised into conventional (C), adapted conventional (AC), traditional (T) and organic (O). Compared with C systems, AC systems differed little, with only minor changes to improve meat quality, animal welfare or environmental impacts, depending on the system. The difference was much larger for T systems, using very fat, slow-growing traditional breeds and generally outdoor raising of fattening pigs. Environmental impacts were calculated at the farm gate and expressed per kg of pig live weight and per ha of land used. For C systems, impacts per kg LW for climate change, acidification, eutrophication, energy use and land occupation were 2.3 kg CO2-eq, 44.0 g SO2-eq, 18.5 g PO4-eq, 16.2 MJ and 4.1 m2, respectively. Compared with C, differences in corresponding mean values were +13%, +5%, 0%, +2% and +16% higher for AC; +54%, +79%, +23%, +50% and +156% for T, and +4%, -16%, +29%, +11% and +121% for O. Conversely, when expressed per ha of land use, mean impacts were 10% to 60% lower for T and O systems, depending on the impact category. This was mainly because of higher land occupation per kg of pig produced, owing to feed production and the outdoor raising of sows and/or fattening pigs. The use of straw bedding tended to increase climate change impact per kg LW. The use of traditional local breeds, with reduced productivity and feed efficiency, resulted in higher impacts per kg LW for all impact categories. T systems with extensive outdoor raising of pigs resulted in markedly lower impact per ha of land used. Eutrophication potential per ha was substantially

ESF [Exploratory Shaft Facility] impact evaluation report: Volume 1, Final report

International Nuclear Information System (INIS)

1985-08-01

This report assesses the impacts of integrating an Exploratory Shaft Facility (ESF) with a high-level nuclear waste repository in salt. A general repository subsurface design is described which complies with the Mine Safety and Health Administration regulations for gassy metal and non-metal mines. This design is combined with the ESF into a site-specific subsurface layout with associated shafts and surface facilities for each of seven sites. An evaluation to identify integration impacts is described for two specific ESF configurations (Cases 1 and 2) for each of the seven sites. These configurations are an ESF which uses two of the full size repository shafts, and an ESF with one 10-ft and one 22-ft diameter shaft. An evaluation of an ESF configuration (Case 3) with two 12-ft diameter shafts at three of the seven sites is also described. These sites are Deaf Smith, Davis Canyon, and Richton Dome. A fourth evaluation (Case 4) for the Deaf Smith site only, addresses a ''fast track'' subsurface development plan to allow waste emplacement by 1998. A fifth evaluation (Case 5), provides site-specific ES locations, for the three sites included in Case 3, which are supportive of a shaft siting study prepared by ONWI

A few remarks on Poincare-Perron solutions and regularly varying solutions

Czech Academy of Sciences Publication Activity Database

Řehák, Pavel

2016-01-01

Roč. 66, č. 6 (2016), s. 1297-1318 ISSN 0139-9918 Institutional support: RVO:67985840 Keywords : Perron theorem * regularly varying solution * linear differential equation Subject RIV: BA - General Mathematics Impact factor: 0.346, year: 2016 https://www.degruyter.com/view/j/ms.2016.66.issue-6/ms-2016-0224/ms-2016-0224. xml ?format=INT

Numerical Asymptotic Solutions Of Differential Equations

Science.gov (United States)

Thurston, Gaylen A.

1992-01-01

Numerical algorithms derived and compared with classical analytical methods. In method, expansions replaced with integrals evaluated numerically. Resulting numerical solutions retain linear independence, main advantage of asymptotic solutions.

Developing a Stakeholder-Driven Anticipated Timeline of Impact for Evaluation of Social Programs

Science.gov (United States)

Sridharan, Sanjeev; Campbell, Bernadette; Zinzow, Heidi

2006-01-01

The authors present a stakeholder-driven method, the earliest anticipated timeline of impact, which is designed to assess stakeholder expectations for the earliest time frame in which social programs are likely to affect outcomes. The utility of the anticipated timeline of impact is illustrated using an example from an evaluation of a…

Evaluation of the Impact of Outsourcing on the Performance of Lithuanian Electricity Industry

Directory of Open Access Journals (Sweden)

Ligita Gasparėnienė

2016-01-01

Full Text Available The article is aimed at evaluation of the impact of outsourcing on the performance of Lithuanian electricity industry. Research methods include systematic analysis of the scientific literature and expert evaluation. Theoretical analysis of the literature has enabled to identify the most significant outsourcing determinants, which have the impact on the performance of electricity industry, and the main outsourcing-related risks for the companies operating in this industry. The results of the empirical research have revealed the effects of various outsourcing determinants on the performance of Lithuanian electricity industry as well as negative outcomes of outsourcing application in the researched industry.

Histopathologic Evaluation of Follicular Tissues Associated with Impacted Third Molars

Directory of Open Access Journals (Sweden)

M. Khorasani

2008-06-01

Full Text Available Objective: The aim of the present study was to histopathologically evaluate follicular tissues of third molars with pericoronal radiolucenciesof less than 2 millimeters.Materials and Methods: In this descriptive analytic study, 100 impacted third molars with normal follicular spaces were removed and their pericoronaltissues submitted for histopathologic examination. Different characteristicsof the epithelium and connective tissue were evaluated in all cases. Statisti-cal analysis was performed using chi square and Mann-Whitney tests.Results: In our study sample, 74% of the patients were female and 26% were male, ranging in age from 13 to 54 years (mean, 25.3 years. Lining epithelium was observed in 69% of the specimens of which 31%, 23% and 14% was cuboidal, squamous and columnar, respectively. A significant re-lationship was found between the presence of squamous epithelium and pa-tient age (P<0.05. Nonspecific chronic inflammation was the only patho-logic finding observed in 44% of the specimens. Inflammation was signifi-cantly associated with age and squamous metaplasia (P<0.05.Conclusion: Considering that pathologic lesions were not observed in anyof the studied cases, unerupted third molars should not be removed unless there is a clinical indication to do so, or in case the impacted molar shows evidence of pathological changes. Follow-up is suggested for asympto-matic impacted third molars.

Evaluation of matrix effect in isotope dilution mass spectrometry based on quantitative analysis of chloramphenicol residues in milk powder

International Nuclear Information System (INIS)

Li, Xiu Qin; Yang, Zong; Zhang, Qing He; Li, Hong Mei

2014-01-01

Graphical abstract: -- Highlights: •We develop a strategy to evaluate matrix effect and its impact on the IDMS results. •Matrix effect and IDMS correction factor from different conditions are evaluated. •Ion suppression effect is observed in LLE and HLB pre-treated sample solutions. •Ion enhancement effect is found in MCX pre-treated sample solution. •IDMS correction factor in HLB and MCX solutions in three instruments is close to 1 -- Abstract: In the present study, we developed a comprehensive strategy to evaluate matrix effect (ME) and its impact on the results of isotope dilution mass spectrometry (IDMS) in analysis of chloramphenicol (CAP) residues in milk powder. Stable isotope-labeled internal standards do not always compensate ME, which brings the variation of the ratio (the peak area of analyte/the peak area of isotope). In our investigation, impact factors of this variation were studied in the extraction solution of milk powder using three mass spectrometers coupled with different ion source designs, and deuterium-labeled chloramphenicol (D5-CAP) was used as the internal standard. ME from mobile phases, sample solvents, pre-treatment methods, sample origins and instruments was evaluated, and its impact on the results of IDMS was assessed using the IDMS correction factor (θ). Our data showed that the impact of ME of mobile phase on the correction factor was significantly greater than that of sample solvent. Significant ion suppression and enhancement effects were observed in different pre-treated sample solutions. The IDMS correction factor in liquid–liquid extraction (LLE) and molecular imprinted polymer (MIP) extract with different instruments was greater or less 1.0, and the IDMS correction factor in hydrophilic lipophilic balance (HLB) and mix-mode cation exchange (MCX) extract with different instruments was all close to 1.0. To the instrument coupled with different ion source design, the impact of ME on IDMS quantitative results was

Approximative solutions of stochastic optimization problem

Czech Academy of Sciences Publication Activity Database

Lachout, Petr

2010-01-01

Roč. 46, č. 3 (2010), s. 513-523 ISSN 0023-5954 R&D Projects: GA ČR GA201/08/0539 Institutional research plan: CEZ:AV0Z10750506 Keywords : Stochastic optimization problem * sensitivity * approximative solution Subject RIV: BA - General Mathematics Impact factor: 0.461, year: 2010 http://library.utia.cas.cz/separaty/2010/SI/lachout-approximative solutions of stochastic optimization problem.pdf

Norming of Student Evaluations of Instruction: Impact of Noninstructional Factors

Science.gov (United States)

Nargundkar, Satish; Shrikhande, Milind

2014-01-01

Student Evaluations of Instruction (SEIs) from about 6,000 sections over 4 years representing over 100,000 students at the college of business at a large public university are analyzed, to study the impact of noninstructional factors on student ratings. Administrative factors like semester, time of day, location, and instructor attributes like…

Reservoir shorelines : a methodology for evaluating operational impacts

Energy Technology Data Exchange (ETDEWEB)

Lawrence, M.; Braund-Read, J.; Musgrave, B. [BC Hydro, Burnaby, BC (Canada)

2009-07-01

BC Hydro has been operating hydroelectric facilities for over a century in British Columbia. The integrity and stability of the shorelines and slopes bordering hydroelectric reservoirs is affected by changing water levels in the reservoir, natural processes of flooding, wind and wave action and modification of groundwater levels. Establishing setbacks landward of the shoreline are needed in order to protect useable shoreline property that may be at risk of flooding, erosion or instability due to reservoir operations. Many of the reservoirs in British Columbia are situated in steep, glaciated valleys with diverse geological, geomorphological and climatic conditions and a variety of eroding shorelines. As such, geotechnical studies are needed to determine the operational impacts on reservoir shorelines. Since the 1960s BC Hydro has been developing a methodology for evaluating reservoir impacts and determining the land around the reservoir perimeter that should remain as a right of way for operations while safeguarding waterfront development. The methodology was modified in the 1990s to include geomorphological and geological processes. However, uncertainties in the methodology still exist due to limited understanding of key issues such as rates of erosion and shoreline regression, immaturity of present day reservoir shorelines and impacts of climate change. 11 refs., 1 tab., 7 figs.

Possibilities of information infrastructure in evaluation of environmental pollution and water quality by implementing the solutions of sustainable development

Directory of Open Access Journals (Sweden)

Ramutė Naujikienė

2014-10-01

Full Text Available The purpose – of the article is attached to the examination of information infrastructure for the assessment of water resource planning and water treatment activities, to provide data warehouse (DW analysis measuring environmental and water pollution and indicators for the evaluation based on the requirements of sustainable development.Methodology – the analysis is performed by revealing the factors affecting sustainable development decisions. The insights of scientists are demonstrated by assessing the situation of environmental pollution, the appropriate search parameters, which allow revealing environmental and water contamination by waste water. Secondary data analysis was performed in order to reveal surface water contamination assessment districts in Lithuania and the Baltic Sea region and to summarise the results.It is very important for business activities to implement methods and tools based on a sense of responsibility for environmental pollution through the use of methods for increasing corporate responsibility, supporting measures to promote stimulation resulting in emission reduction, and efficiency of techniques. The paper presents the results of surface water pollution obtained according to the monitoring data and benchmarking analysis in the districts of Lithuania and the Baltic Sea. It can be concluded that the economic factors of enterprise functioning on the occasion of pollution also impacts the pollution of the Baltic Sea.More and more attention in the sustainable development of the implementation process should be given to decreasing population and increasing responsibility of economic operators for measures of environmental management levels: strategic and tactical planning, operational control, evaluation of economic, social and ecological balance. The regulatory importance in determining the impact on the environment should also be kept in mind.The results – were based on the obtained wastewater monitoring and

Dosimetric evaluation of spectrophotometric response of alanine gel solution for gamma, photons, electrons and thermal neutrons radiations

International Nuclear Information System (INIS)

Silva, Cleber Feijo

2009-01-01

Alanine Gel Dosimeter is a new gel material developed at IPEN that presents significant improvement on Alanine system developed by Costa. The DL-Alanine (C 3 H 7 NO 2 ) is an amino acid tissue equivalent that improves the production of ferric ions in the solution. This work aims to analyse the main dosimetric characteristics this new gel material for future application to measure dose distribution. The performance of Alanine gel solution was evaluated to gamma, photons, electrons and thermal neutrons radiations using the spectrophotometry technique. According to the obtained results for the different studied radiation types, the reproducibility intra-batches and inter-batches is better than 4% and 5%, respectively. The dose response presents a linear behavior in the studied dose range. The response dependence as a function of dose rate and incident energy is better 2% and 3%, respectively. The lower detectable dose is 0.1 Gy. The obtained results indicate that the Alanine gel dosimeter presents good performance and can be useful as an alternative dosimeter in the radiotherapy area, using MRI technique for tridimensional dose distribution evaluation. (author)

Possible impacts of forest decline on the protection functions of forests in the Bavarian Alps

Energy Technology Data Exchange (ETDEWEB)

Suda, M

1989-01-01

In context with the forest decline phenomenon the question arises on how the protection function of forests will be affected and how possible impacts can be evaluated. First, a solution model based on a feedback-circle system is presented, which allows to assess possible impacts of forest decline on massmovements. The application of this approach to the avalanche and flooding phenomena is presented and demonstrated by model calculations for different examples in the country of Traunstein/Bavaria Alps. Finally, a model is presented which gives an answer to the question, what impacts on the tourism industry are possible due to forest decline and how these influences can be evaluated.

Evaluation of long term radiological impact on population close to remediated uranium mill tailings storages

International Nuclear Information System (INIS)

Kerouanton, David; Delgove, Laure

2008-01-01

A methodology is elaborated in order to evaluate the long term radiological impact of remediated uranium mill tailings storage. Different scenarios are chosen and modelled to cover future evolution of the tailings storages. Radiological impact is evaluated for different population such as adults and children living in the immediate vicinity or directly on the storage, road workers or walkers on the storage. Equation and methods are detailed. (author)

Evaluation of environmental impact of air pollution sources

Energy Technology Data Exchange (ETDEWEB)

Holnicki, P. [Polish Academy of Science, Warsaw (Poland). Systems Research Inst.

2004-10-15

This paper addresses the problem of evaluation and comparison of environmental impact of emission sources in the case of a complex, multisource emission field. The analysis is based on the forecasts of a short-term, dynamic dispersion model. The aim is to get a quantitative evaluation of the contribution of the selected sources according to the predefined, environmental cost function. The approach utilizes the optimal control technique for distributed parameter systems. The adjoint equation, related to the main transport equation of the forecasting model, is applied to calculate the sensitivity of the cost function to the emission intensity of the specified sources. An example implementation of a regional-scale, multilayer dynamic model of SOx transport is discussed as the main forecasting tool. The test computations have been performed for a set of the major power plants in a selected industrial region of Poland.

Multicriteria analysis to evaluate wave energy converters based on their environmental impact: an Italian case study

Science.gov (United States)

Azzellino, Arianna; Contestabile, Pasquale; Lanfredi, Caterina; Vicinanza, Diego

2010-05-01

harbour protection, and installed at -10m depth (length=300 m) may produce about 2.7 GWh/y with a total costs of about 12,000,000 €, where only the 50% of the amount are the costs of the SSG device. Obviously the environmental impact of the two solutions is quite different. Aim of this study is to provide a multicriteria decision support framework to evaluate the best WEC typology and location in the perspective of the environmental cost-benefit analysis. The general environmental aspects generated by wave power projects will be described. Colonisation patterns and biofouling will be discussed with particular reference to changes of the seabed and alterations due to new substrates. In addition, impacts for fish, fishery and marine mammals will be also considered. We suggest that wave power projects should be evaluated also on the basis of their environmental impacts in the perspective of the Strategic Environmental Assessment (SEA) analysis, as implemented by the European Commission (SEA Directive 2001/42/EC). The early incorporation of the environmental aspects involved in the evaluation of wave power projects will give the opportunity for early mitigations or design modifications, most likely making wave projects more acceptable in the long run and more suitable for the marine environment.

Evaluation of Purging Solutions for Military Fuel Tanks

National Research Council Canada - National Science Library

Rhee, In-Sik

2003-01-01

.... It is also a biodegradable water based solvent. Because of this property, US Army has used this environmentally friendly solvent as a purging solution in all military fuel tanks including Heavy Expanded Mobility Truck (HEMTT...

Interactive radiological anatomy eLearning solution for first year medical students: Development, integration, and impact on learning.

Science.gov (United States)

Webb, Alexandra Louise; Choi, Sunhea

2014-01-01

A technology enhanced learning and teaching (TELT) solution, radiological anatomy (RA) eLearning, composed of a range of identification-based and guided learning activities related to normal and pathological X-ray images, was devised for the Year 1 nervous and locomotor course at the Faculty of Medicine, University of Southampton. Its effectiveness was evaluated using a questionnaire, pre- and post-tests, focus groups, summative assessment, and tracking data. Since introduced in 2009, a total of 781 students have used RA eLearning, and among them 167 Year 1 students in 2011, of whom 116 participated in the evaluation study. Students enjoyed learning (77%) with RA eLearning, found it was easy to use (81%) and actively engaged them in their learning (75%), all of which were associated to the usability, learning design of the TELT solution and its integration in the curriculum; 80% of students reported RA eLearning helped their revision of anatomy and 69% stated that it facilitated their application of anatomy in a clinical context, both of which were associated with the benefits offered by the learning and activities design. At the end of course summative assessment, student knowledge of RA eLearning relevant topics (mean 80%; SD ±16) was significantly better as compared to topics not relevant to RA eLearning (mean 63%; SD ±15) (mean difference 18%; 95% CI 15% to 20%; P < 0.001). A well designed and integrated TELT solution can be an efficient method for facilitating the application, integration, and contextualization of anatomy and radiology to create a blended learning environment. © 2013 American Association of Anatomists.

A Methodology for Evaluating Quantitative Nuclear Safety Culture Impact

Energy Technology Data Exchange (ETDEWEB)

Han, Kiyoon; Jae, Moosung [Hanyang University, Seoul (Korea, Republic of)

2015-05-15

Through several accidents of NPPs including the Fukushima Daiichi in 2011 and Chernobyl accidents in 1986, nuclear safety culture has been emphasized in reactor safety world-widely. In Korea, KHNP evaluates the safety culture of NPP itself. KHNP developed the principles of the safety culture in consideration of the international standards. A questionnaire and interview questions are also developed based on these principles and it is used for evaluating the safety culture. However, existing methodology to evaluate the safety culture has some disadvantages. First, it is difficult to maintain the consistency of the assessment. Second, the period of safety culture assessment is too long (every two years) so it has limitations in preventing accidents occurred by a lack of safety culture. Third, it is not possible to measure the change in the risk of NPPs by weak safety culture since it is not clearly explains the effect of safety culture on the safety of NPPs. In this study, Safety Culture Impact Assessment Model (SCIAM) is developed overcoming these disadvantages. In this study, SCIAM which overcoming disadvantages of exiting safety culture assessment method is developed. SCIAM uses SCII to monitor the statues of the safety culture periodically and also uses RCDF to quantify the safety culture impact on NPP's safety. It is significant that SCIAM represents the standard of the healthy nuclear safety culture, while the exiting safety culture assessment presented only vulnerability of the safety culture of organization. SCIAM might contribute to monitoring the level of safety culture periodically and, to improving the safety of NPP.

A Methodology for Evaluating Quantitative Nuclear Safety Culture Impact

International Nuclear Information System (INIS)

Han, Kiyoon; Jae, Moosung

2015-01-01

Through several accidents of NPPs including the Fukushima Daiichi in 2011 and Chernobyl accidents in 1986, nuclear safety culture has been emphasized in reactor safety world-widely. In Korea, KHNP evaluates the safety culture of NPP itself. KHNP developed the principles of the safety culture in consideration of the international standards. A questionnaire and interview questions are also developed based on these principles and it is used for evaluating the safety culture. However, existing methodology to evaluate the safety culture has some disadvantages. First, it is difficult to maintain the consistency of the assessment. Second, the period of safety culture assessment is too long (every two years) so it has limitations in preventing accidents occurred by a lack of safety culture. Third, it is not possible to measure the change in the risk of NPPs by weak safety culture since it is not clearly explains the effect of safety culture on the safety of NPPs. In this study, Safety Culture Impact Assessment Model (SCIAM) is developed overcoming these disadvantages. In this study, SCIAM which overcoming disadvantages of exiting safety culture assessment method is developed. SCIAM uses SCII to monitor the statues of the safety culture periodically and also uses RCDF to quantify the safety culture impact on NPP's safety. It is significant that SCIAM represents the standard of the healthy nuclear safety culture, while the exiting safety culture assessment presented only vulnerability of the safety culture of organization. SCIAM might contribute to monitoring the level of safety culture periodically and, to improving the safety of NPP

The Energy Impact in Buildings of Vegetative Solutions for Extensive Green Roofs in Temperate Climates

Directory of Open Access Journals (Sweden)

Benedetta Barozzi

2016-08-01

Full Text Available Many bibliographical studies have highlighted the positive effects of green roofs as technological solutions both for new and renovated buildings. The one-year experimental monitoring campaign conducted has investigated, in detail, some aspects related to the surface temperature variation induced by the presence of different types of vegetation compared to traditional finishing systems for flat roofs and their impact from an energy and environmental point of view. The results obtained underlined how an appropriate vegetative solution selection can contribute to a significant reduction of the external surface temperatures (10 °C–20 °C for I > 500 W/m2 and 0 °C–5 °C for I < 500 W/m2, regardless of the season compared to traditional flat roofs. During the winter season, the thermal gradients of the planted surface temperatures are close to zero compared to the floor, except under special improving conditions. This entails a significant reduction of the energy loads from summer air conditioning, and an almost conservative behavior with respect to that from winter heating consumption. The analysis of the inside growing medium temperatures returned a further interesting datum, too: the temperature gradient with respect to surface temperature (annual average 4 °C–9 °C is a function of solar radiation and involves the insulating contribution of the soil.

SOCIAL ENTERPRISES - FROM POTENTIAL TO IMPACT

Directory of Open Access Journals (Sweden)

Bucaciuc Anamaria

2015-07-01

Full Text Available Social economy is seen by many as the magical solution to the social and economic problems which came over time with each economic crisis. An important problem when dealing with social problems is however the need to find solutions which would work at large scale. As Lisbeth Schorr stated “We have learned to create the small exceptions that can change the lives of hundreds. But we have not learned how to make the exceptions the rule to change the lives of millions”. This not only rises the importance of social enterprises but also the necessity of a more strategic and systematic approach to the problem of spreading social innovation. The potential of a social enterprise, connected with the further assessment of its impact is an important correlation which needs further studies. It is one thing for social enterprises to exhibit a great potential, but it is another for that potential to be realized and to produce significant benefits for its target group. Even if the potential of social enterprises is generally known, and this is the reason for which social enterprises benefit from a lot of attention and support, within the literature existing on the social enterprises, the issue of its’ potential is not dealt sufficiently. On the other hand, impact assessment has been studied largely within the literature. This is maybe also because evaluation of social impact is a challenging endeavour for any person analysing a social enterprise, assessing subtle changes which are difficult to be measured, evaluated and traced back to specific events. The impact assessment, made through critical and interpretative accounting theories (which are contextual, seek for engagement, are concerned with micro and macro levels and are interdisciplinary, indicates that the evaluation of the social enterprises’ socio-economic impact can have a base on the positivist, critical and interpretative accounting approaches. However, despite the enthusiasm shown for

Impact of frequent evaluations in English in Modern Operating Systems lessons

Directory of Open Access Journals (Sweden)

Dasiel Alberto Pérez Suárez

2014-06-01

Full Text Available This paper describes the impact that frequent evaluations in English in Modern Operating Systems classes have over the students at the University of Informatics Sciences. The research allo wed showing that, despite of the initially rejection of the students, they gradually assimilated the importance of English in their future profession. This had a positive impact on English language study in order to solve academic problems by raising the academic performance and the self - confidence level , to face the English language for professional purposes required in a career as Informatics Sciences Engineering.

Performance Evaluation of Distributed Mobility Management Protocols: Limitations and Solutions for Future Mobile Networks

Directory of Open Access Journals (Sweden)

J. Carmona-Murillo

2017-01-01

Full Text Available Mobile Internet data traffic has experienced an exponential growth over the last few years due to the rise of demanding multimedia content and the increasing number of mobile devices. Seamless mobility support at the IP level is envisioned as a key architectural requirement in order to deal with the ever-increasing demand for data and to efficiently utilize a plethora of different wireless access networks. Current efforts from both industry and academia aim to evolve the mobility management protocols towards a more distributed operation to tackle shortcomings of fully centralized approaches. However, distributed solutions face several challenges that can result in lower performance which might affect real-time and multimedia applications. In this paper, we conduct an analytical and simulated evaluation of the main centralized and proposed Distributed Mobility Management (DMM solutions. Our results show that, in some scenarios, when users move at high speed and/or when the mobile node is running long-lasting applications, the DMM approaches incur high signaling cost and long handover latency.

Spray-dried HPMC microparticles of Indomethacin: Impact of drug-polymer ratio and viscosity of the polymeric solution on dissolution

International Nuclear Information System (INIS)

Alanazi, Fars K.; El-Badry, M.; Alsarra, Ibrahim A.

2006-01-01

Polymeric microparticles prepared by spray-drying techniques were investigated to enhance the dissolution rate of indomethacin (IM) in comparison with conventional microparticles prepared by co-precipitation solid dispersion method. Drug-polymer ratios and viscosity of polymeric solutions as potential factors were used in order to enhance the dissolution rate of IM. Spray-drying technique was used for preparing of microparticles using aqueous suspension of IM in hydroxypropyl methylcellulose (HPMC) polymer solution. The effect of drug-polymer ratios on dissolution rates of IM was studied in simulating intestinal medium. IM was analyzed spectrophotometrically at λ =320nm. For each drug-polymer ratios, low and high viscosity polymeric solutions were prepared and their impacts on the dissolution of IM were observed. Microparticles were morphologically characterized by optical microscopy. The interaction between IM and HPMC was studied by differential scanning caloremetry (DSC) and x-ray diffractometry (XRD). Spherical fluffy microparticles of IM were obtained using HPMC. It was observed that the prepared spray-dried microparticles significantly increase the dissolution rate of IM. The increase in dissolution rates was achieved with drug: polymer ratios 1: 1 as well as 1:2 and interestingly, the decrease in drug content in ratio exceeding 1:2 resulted in reduction in dissolution rates. Also, with all drug-polymer ratios, the low viscosity polymeric solutions gave the higher dissolution rates. In conclusion, HPMC microparticles loaded with IM were prepared by spray drying-technique and the potential of this technique to enhance the dissolution was studied. The findings indicate that the dissolution profile of IM microparticles prepared by spray -drying technique relied on drug-polymer ratios and viscosity of polymeric solutions. (author)

Electrical Conductivity and Chemical Composition of Soil Solution: Comparison of Solution Samplers in Tropical Soils

Directory of Open Access Journals (Sweden)

Davi Lopes do Carmo

2016-01-01

Full Text Available ABSTRACT Soil solution samplers may have the same working principle, but they differ in relation to chemical and physical characteristics, cost and handling, and these aspects exert influence on the chemical composition of the soil solution obtained. This study was carried out to evaluate, over time, the chemical composition of solutions extracted by Suolo Acqua, with the hydrophilic membrane (HM as a standard, using soils with contrasting characteristics, and to determine the relationship between electrical conductivity (EC and concentration of ions and pH of soil solution samples. This study was carried out under laboratory conditions, using three soils samples with different clay and organic matter (OM contents. Soil solution contents of F−, Cl−, NO−3, Br−, SO42−, Na+, NH4+, K+, Mg2+, Ca2+, were analyzed, as well as inorganic, organic, and total C contents, pH, and EC, in four successive sampling times. Soil solution chemical composition extracted by the Suolo Acqua sampler is similar to that collected by the HM, but the Suolo Acqua extracted more Na+ and soluble organic C than the HM solution. Solution EC, cation and anion concentrations, and soluble C levels are higher in the soil with greater clay and OM contents (Latossolo and Cambissolo in this case. Soil solution composition varied over time, with considerable changes in pH, EC, and nutrient concentrations, especially associated with soil OM. Thus, single and isolated sampling of the soil solution must be avoided, otherwise composition of the soil solution may not be correctly evaluated. Soil solution EC was regulated by pH, as well as the sum of cation and anion concentrations, and the C contents determined in the soil liquid phase.

Evaluating the Impact of IT Outsourcing in an Organization

OpenAIRE

Oduose, Godspower; Njinko, Polycarp

2009-01-01

  ABSTRACT Date: 16th June 2009 Authors: ODUOSE GODSPOWER ONORIODE (810822-T139) NJINKO POLYCARP NGANSI (791005-5735) Title: Evaluating the impact of IT Outsourcing in an Organization. Introduction: The continuous advancement of technology has increase the intensity of competition between organizations whose operations or core competence is based on information technology. Consequently this has force them to decide to either outsource or insource in order to survive the competition. Purpose:...

THE CLINICAL EFFICACY OF HYPOOSMOLYARNY ORAL SOLUTION WITH LACTOBACILLUS GG FOR REHYDRATION IN INTESTINAL INFECTIONS IN CHILDREN

Directory of Open Access Journals (Sweden)

V. F. Uchaikin

2015-01-01

Full Text Available In 60 patients with moderate forms of the OCI «osmotic» (76.7% and «invasive» (23.3% such as diarrhea, aged 3—12 years, to evaluate the clinical effectiveness, impact on water and electrolyte metabolism, acid-base balance and intestinal microbiocenosis hypoosmolyarny solution with Lactobacillus rhamnosus GG «Regidron Bio» (30 patients and hyperosmolarny solution (30 patients. It was found that in the group of patients receiving «Regidron Bio», in contrast to the hyperosmolarny solution, is rapidly disappearing symptoms of intoxication and exsicosis, abdominal pain, meteorism and liquid watery diarrhea. The average duration of the acute period is reduced from 4,06 ± 0,32 to 3,07 ± 0,27 day (P < 0,05. Already by the end of the 1st day of the beginning of rehydration, almost all patients (90% are normalized malformations of blood electrolytes and glucose, hematocrit, and on the 2nd day, which took place in 80% of patients with metabolic acidosis. The addition of the «Bio rehydron» Lactobacillus rhamnosus GG facilitates, unlike hyperosmolarny solution indicator normalizing lg Lactobacilli (in 73.3% and Enterococci (93.3%, but has no significant positive impact on the amount of Bifidobacteria and Escherichia coli.

Evaluation of permeability and swelling pressure of compacted bentonite using a calcium hydroxide solution

International Nuclear Information System (INIS)

Aoyagi, Takayoshi; Maeda, Munehiro; Mihara, Morihiro; Tanaka, Masuhiro

1998-12-01

Tests to determine the swelling pressure, permeability, compressive strength and elastic modulus of Ca-Na exchanged bentonite, Na-bentonite and Ca-bentonite at the Power Reactor and Nuclear Fuel Development Corporation have mainly used distilled water. However, disposal facilities for TRU waste will use cementateous material for packaging, backfill as well as structural support. In this case, a large amount of calcium will dissolve in groundwater flowing through the cementateous material. Therefore, it is important to investigate the mechanical properties of bentonite in calcium-rich water as part of the disposal research program for TRU waste. In order to understand the effect of the chemical composition of water on the basic mechanical properties of bentonite - part of evaluating the disposal concepts for TRU waste disposal - we tested the permeability of compacted bentonite under saturated conditions using a calcium hydroxide solution. The aqueous solution represents water dominated by the calcium component. Na-bentonite, Ca-Na exchanged bentonite and Ca-bentonite were used for swelling pressure measurement tests and permeability testing. Measures of the maximum and equilibrium swelling pressure as well as permeability we obtained. The dry density of bentonite was varied between tests. Results show that swelling pressure and permeability are dependent on dry density. In separate tests using Ca-bentonite, the bentonite-mixing rate was varied as an independent parameter. Results show that there is little change in the swelling pressure and permeability between tests using calcium hydroxide solution and distilled water for all bentonite types. (author)

The potential of the Global Person Generated Index for evaluating the perceived impacts of conservation interventions on subjective well-being

DEFF Research Database (Denmark)

Rasolofoson, Ranaivo Andriarilala; Nielsen, Martin Reinhardt; Jones, Julia P.G.

2018-01-01

a subjective measure), and impacts (requiring a participatory approach), but very few, if any, conservation evaluations live up to these standards. We used a participatory impact evaluation approach with the Global Person Generated Index (GPGI) to investigate the relative impacts of strict protection......There is growing interest in the importance of ensuring that biodiversity conservation is not achieved at the expense of local people’s well-being. It has been suggested that when evaluating the impact of an intervention, the affected population should be allowed to define well-being (requiring......, and the relative importance of the five identified domains. Participatory impact evaluation establishes local perceptions of the cause-effect relationship between an intervention and respondents’ performance in each domain. Over half the respondents perceived no positive or negative impacts from the conservation...

Impact of mild to severe hemophilia on education and work by US men, women, and caregivers of children with hemophilia B: The Bridging Hemophilia B Experiences, Results and Opportunities into Solutions (B-HERO-S) study.

Science.gov (United States)

Cutter, Susan; Molter, Don; Dunn, Spencer; Hunter, Susan; Peltier, Skye; Haugstad, Kimberly; Frick, Neil; Holot, Natalia; Cooper, David L

2017-04-01

The psychosocial impact of hemophilia on work was recently investigated in the Hemophilia Experiences, Results and Opportunities (HERO) study. The findings revealed that hemophilia had an impact for adults with moderate/severe hemophilia and caregivers of children with hemophilia. HERO did not specifically evaluate impact on education in adults/children with mild/moderate hemophilia or the impact on employment of spouses/partners of caregivers of affected children. The Bridging Hemophilia B Experiences, Results and Opportunities into Solutions (B-HERO-S) study evaluated the impact of hemophilia on the lives of adult men/women with mild-severe hemophilia B and caregivers of boys/girls with hemophilia B and their spouses/partners. Many adults with hemophilia B (94%) reported that hemophilia had a negative effect on their ability to complete a formal education, often attributed to the inability to attend or concentrate in school as a result of hemophilia-related bleeding or pain. Most adults with hemophilia B (95%) and caregivers/partners (89%/84%) indicated that hemophilia had a negative impact on employment. Most adults with hemophilia were employed (81%), with construction/manufacturing (35%) as the most frequently reported industry; many worked in jobs requiring manual labor (39%). Of those unemployed, 62% never worked, and those who stopped working reported that they left the workforce due to financial issues (59%), including insurance coverage/co-pays, or hemophilia-related issues (55%). Nearly one-third of caregivers voluntarily left the workforce to care for children with hemophilia. These results suggest a need to focus more effort on career counseling for adults with hemophilia B and caregivers of affected children, especially around mild/moderate hemophilia, as this population may not be as well informed regarding potential impact in school and the workplace. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Exact solution of a modified El Farol's bar problem: Efficiency and the role of market impact

Science.gov (United States)

Marsili, Matteo; Challet, Damien; Zecchina, Riccardo

2000-06-01

We discuss a model of heterogeneous, inductive rational agents inspired by the El Farol Bar problem and the Minority Game. As in markets, agents interact through a collective aggregate variable - which plays a role similar to price - whose value is fixed by all of them. Agents follow a simple reinforcement-learning dynamics where the reinforcement, for each of their available strategies, is related to the payoff delivered by that strategy. We derive the exact solution of the model in the “thermodynamic” limit of infinitely many agents using tools of statistical physics of disordered systems. Our results show that the impact of agents on the market price plays a key role: even though price has a weak dependence on the behavior of each individual agent, the collective behavior crucially depends on whether agents account for such dependence or not. Remarkably, if the adaptive behavior of agents accounts even “infinitesimally” for this dependence they can, in a whole range of parameters, reduce global fluctuations by a finite amount. Both global efficiency and individual utility improve with respect to a “price taker” behavior if agents account for their market impact.

The Teaching of General Solution Methods to Pattern Finding Problems through Focusing on an Evaluation and Improvement Process.

Science.gov (United States)

Ishida, Junichi

1997-01-01

Examines the effects of a teaching strategy in which fifth-grade students evaluated the strengths or weaknesses of solution methods to pattern finding problems, including an experimental and control group each consisting of 34 elementary students, in Japan. The experimental group showed a significantly better performance on the retention test…

An evaluation of the process and initial impact of disseminating a nursing e-thesis.

Science.gov (United States)

Macduff, Colin

2009-05-01

This paper is a report of a study conducted to evaluate product, process and outcome aspects of the dissemination of a nursing PhD thesis via an open-access electronic institutional repository. Despite the growth of university institutional repositories which make theses easily accessible via the world wide web, nursing has been very slow to evaluate related processes and outcomes. Drawing on Stake's evaluation research methods, a case study design was adopted. The case is described using a four-phase structure within which key aspects of process and impact are reflexively analysed. In the conceptualization/re-conceptualization phase, fundamental questions about the purpose, format and imagined readership for a published nursing PhD were considered. In the preparation phase, seven key practical processes were identified that are likely to be relevant to most e-theses. In the dissemination phase email invitations were primarily used to invite engagement. The evaluation phase involved quantitative indicators of initial impact, such as page viewing and download statistics and qualitative feedback on processes and product. Analysis of process and impact elements of e-thesis dissemination is likely to have more than intrinsic value. The advent of e-theses housed in web-based institutional repositories has the potential to transform thesis access and use. It also offers potential to transform the nature and scope of thesis production and dissemination. Nursing scholars can exploit and evaluate such opportunities.

Evaluation of the Impact Resistance of Various Composite Sandwich Beams by Vibration Tests

Directory of Open Access Journals (Sweden)

Amir Shahdin

2011-01-01

Full Text Available Impact resistance of different types of composite sandwich beams is evaluated by studying vibration response changes (natural frequency and damping ratio. This experimental works will help aerospace structural engineer in assess structural integrity using classification of impact resistance of various composite sandwich beams (entangled carbon and glass fibers, honeycomb and foam cores. Low velocity impacts are done below the barely visible impact damage (BVID limit in order to detect damage by vibration testing that is hardly visible on the surface. Experimental tests are done using both burst random and sine dwell testing in order to have a better confidence level on the extracted modal parameters. Results show that the entangled sandwich beams have a better resistance against impact as compared to classical core materials.

Strategies towards Evaluation beyond Scientific Impact. Pathways not only for Agricultural Research

Directory of Open Access Journals (Sweden)

Birge M. Wolf

2013-12-01

Full Text Available Various research fields, like organic agricultural research, are dedicated to solving real-world problems and contributing to sustainable development. Therefore, systems research and the application of interdisciplinary and transdisciplinary approaches are increasingly endorsed. However, research performance depends not only on self-conception, but also on framework conditions of the scientific system, which are not always of benefit to such research fields. Recently, science and its framework conditions have been under increasing scrutiny as regards their ability to serve societal benefit. This provides opportunities for (organic agricultural research to engage in the development of a research system that will serve its needs. This article focuses on possible strategies for facilitating a balanced research evaluation that recognises scientific quality as well as societal relevance and applicability. These strategies are (a to strengthen the general support for evaluation beyond scientific impact, and (b to provide accessible data for such evaluations. Synergies of interest are found between open access movements and research communities focusing on global challenges and sustainability. As both are committed to increasing the societal benefit of science, they may support evaluation criteria such as knowledge production and dissemination tailored to societal needs, and the use of open access. Additional synergies exist between all those who scrutinise current research evaluation systems for their ability to serve scientific quality, which is also a precondition for societal benefit. Here, digital communication technologies provide opportunities to increase effectiveness, transparency, fairness and plurality in the dissemination of scientific results, quality assurance and reputation. Furthermore, funders may support transdisciplinary approaches and open access and improve data availability for evaluation beyond scientific impact. If they begin to

Evaluating the Impact of Communication Network Performance on Supervisory Supermarket Control

DEFF Research Database (Denmark)

Madsen, Jacob Theilgaard; Minko, Tomasz; Madsen, Tatiana Kozlova

2017-01-01

This paper addresses the evaluation of the impact of non-ideal communication networks on system performance of hierarchical control systems. It develops a stepwise evaluation approach that is applied to the example scenario of a supervisory controller for supermarket temperature control, addressing...... of communication network performance on the supermarket refrigeration control and resulting energy costs using simulation models. The results show that the controller is resilient to downstream information delays, however upstream delays or up- and downstream information loss can cause significant performance...

An Evaluation of Four Electrolyte Models for the Prediction of Thermodynamic Properties of Aqueous Electrolyte Solutions

Directory of Open Access Journals (Sweden)

Kamalodin Momeni

2017-04-01

Full Text Available In this work, the performance of four electrolyte models for prediction the osmotic and activity coefficients of different aqueous salt solutions at 298 K, atmospheric pressure and in a wide range of concentrations are evaluated. In two of these models, (electrolyte Non-Random Two-Liquid e-NRTL and Mean Spherical Approximation-Non-Random Two-Liquid MSA-NRTL, association between ions of opposite charges for simplification purposes is ignored and in the other two ones, (Associative Mean Spherical Approximation-Non-Random Two-Liquid AMSA-NRTL and Binding Mean Spherical Approximation BiMSA association and solvation effects are considered. The predictions of these four models for the osmotic and activity coefficients of electrolyte solutions at 298 K and atmospheric pressure are compared with the experimental data reported in the literature. This comparison includes, 28 different aqueous salt solutions including thio-cyanates, perchlorates, nitrates, hydroxides, quaternary ammonium salts and others. The results show, the performance of models that consider association effects are better than others especially for higher salt concentrations. However, the best performance belongs to BiMSA model which has some parameters with physical meaning.

Evaluation of an Adsorbent Based on Agricultural Waste (Corn Cobs for Removal of Tyrosine and Phenylalanine from Aqueous Solutions

Directory of Open Access Journals (Sweden)

Cibele C. O. Alves

2013-01-01

Full Text Available Adsorption of phenolic amino acids, such as phenylalanine and tyrosine, is quite relevant for the production of protein hydrolysates used as dietary formulations for patients suffering from congenital disorders of amino acid metabolism, such as phenylketonuria. In this study, an adsorbent prepared from corn cobs was evaluated for the removal of tyrosine (Tyr from both a single component solution and a binary aqueous solution with phenylalanine (Phe. The adsorption behavior of tyrosine was similar to that of phenylalanine in single component solutions, however, with a much lower adsorption capacity (14 mg g−1 for Tyr compared to 109 mg g−1 for Phe. Tyr adsorption kinetics was satisfactorily described by a pseudosecond-order model as it was for Phe. In adsorption equilibrium studies for binary mixtures, the presence of Tyr in Phe solutions favored Phe faster adsorption whereas the opposite behavior was observed for the presence of Phe in Tyr solutions. Such results indicate that, in binary systems, Phe will be adsorbed preferably to Tyr, and this is a welcome feature when employing the prepared adsorbent for the removal of Phe from protein hydrolysates to be used in dietary formulations for phenylketonuria treatment.

Analysing student written solutions to investigate if problem-solving processes are evident throughout

Science.gov (United States)

Kelly, Regina; McLoughlin, Eilish; Finlayson, Odilla E.

2016-07-01

An interdisciplinary science course has been implemented at a university with the intention of providing students the opportunity to develop a range of key skills in relation to: real-world connections of science, problem-solving, information and communications technology use and team while linking subject knowledge in each of the science disciplines. One of the problems used in this interdisciplinary course has been selected to evaluate if it affords students the opportunity to explicitly display problem-solving processes. While the benefits of implementing problem-based learning have been well reported, far less research has been devoted to methods of assessing student problem-solving solutions. A problem-solving theoretical framework was used as a tool to assess student written solutions to indicate if problem-solving processes were present. In two academic years, student problem-solving processes were satisfactory for exploring and understanding, representing and formulating, and planning and executing, indicating that student collaboration on problems is a good initiator of developing these processes. In both academic years, students displayed poor monitoring and reflecting (MR) processes at the intermediate level. A key impact of evaluating student work in this way is that it facilitated meaningful feedback about the students' problem-solving process rather than solely assessing the correctness of problem solutions.

A closed form solution for the response of a long elastic beam to dynamic loading

International Nuclear Information System (INIS)

Mittal, R.K.

1989-01-01

Closed form solutions have been obtained using Fourier transform method for the deflection, curvature and particle velocity of a long elastic beam when it is subjected to a concentrated transverse force which is varying with time. These solutions have been illustrated with the help of two force histories, i.e. a half-sine pulse and a rectangular pulse. Dimensionless parameters representing deflection, curvature and particle velocity have been plotted as functions of dimensionless distance and dimensionless time. Furthermore, the particular case of constant velocity impact which has been studied by other authors using different techniques has also been considered in the present paper and the results compare within numerical errors involved in the evaluation of integrals. (orig.) [de

Guiding principles for evaluating the impacts of conservation interventions on human well-being.

Science.gov (United States)

Woodhouse, Emily; Homewood, Katherine M; Beauchamp, Emilie; Clements, Tom; McCabe, J Terrence; Wilkie, David; Milner-Gulland, E J

2015-11-05

Measures of socio-economic impacts of conservation interventions have largely been restricted to externally defined indicators focused on income, which do not reflect people's priorities. Using a holistic, locally grounded conceptualization of human well-being instead provides a way to understand the multi-faceted impacts of conservation on aspects of people's lives that they value. Conservationists are engaging with well-being for both pragmatic and ethical reasons, yet current guidance on how to operationalize the concept is limited. We present nine guiding principles based around a well-being framework incorporating material, relational and subjective components, and focused on gaining knowledge needed for decision-making. The principles relate to four key components of an impact evaluation: (i) defining well-being indicators, giving primacy to the perceptions of those most impacted by interventions through qualitative research, and considering subjective well-being, which can affect engagement with conservation; (ii) attributing impacts to interventions through quasi-experimental designs, or alternative methods such as theory-based, case study and participatory approaches, depending on the setting and evidence required; (iii) understanding the processes of change including evidence of causal linkages, and consideration of trajectories of change and institutional processes; and (iv) data collection with methods selected and applied with sensitivity to research context, consideration of heterogeneity of impacts along relevant societal divisions, and conducted by evaluators with local expertise and independence from the intervention. © 2015 The Authors.

Evaluating the environmental sustainability of biomass-based energy strategy: Using an impact matrix framework

Energy Technology Data Exchange (ETDEWEB)

Weldu, Yemane W., E-mail: ywweldem@ucalgary.ca [Faculty of Environmental Design, University of Calgary, Calgary, Alberta 2500, University Drive NW, T2N 1N4 (Canada); Assefa, Getachew [Faculty of Environmental Design, University of Calgary, Calgary, Alberta 2500, University Drive NW, T2N 1N4 (Canada); Athena Chair in Life Cycle Assessment in Design (Canada)

2016-09-15

A roadmap for a more sustainable energy strategy is complex, as its development interacts critically with the economic, social, and environmental dimensions of sustainable development. This paper applied an impact matrix method to evaluate the environmental sustainability and to identify the desirable policy objectives of biomass-based energy strategy for the case of Alberta. A matrix with the sustainability domains on one axis and areas of environmental impact on the other was presented to evaluate the nexus effect of policy objectives and bioenergy production. As per to our analysis, economic diversification, technological innovation, and resource conservation came up as the desirable policy objectives of sustainable development for Alberta because they demonstrated environmental benefits in all environmental impact categories, namely climate change, human health, and ecosystem. On the other hand, human health and ecosystem impacts were identified as trade-offs when the policy objectives for sustainability were energy security, job creation, and climate change. Thus, bioenergy can mitigate climate change but may impact human health and ecosystem which then in turn can become issues of concern. Energy strategies may result in shifting of risks from one environmental impact category to another, and from one sustainable domain to another if the technical and policy-related issues are not identified.

Evaluating the environmental sustainability of biomass-based energy strategy: Using an impact matrix framework

International Nuclear Information System (INIS)

Weldu, Yemane W.; Assefa, Getachew

2016-01-01

A roadmap for a more sustainable energy strategy is complex, as its development interacts critically with the economic, social, and environmental dimensions of sustainable development. This paper applied an impact matrix method to evaluate the environmental sustainability and to identify the desirable policy objectives of biomass-based energy strategy for the case of Alberta. A matrix with the sustainability domains on one axis and areas of environmental impact on the other was presented to evaluate the nexus effect of policy objectives and bioenergy production. As per to our analysis, economic diversification, technological innovation, and resource conservation came up as the desirable policy objectives of sustainable development for Alberta because they demonstrated environmental benefits in all environmental impact categories, namely climate change, human health, and ecosystem. On the other hand, human health and ecosystem impacts were identified as trade-offs when the policy objectives for sustainability were energy security, job creation, and climate change. Thus, bioenergy can mitigate climate change but may impact human health and ecosystem which then in turn can become issues of concern. Energy strategies may result in shifting of risks from one environmental impact category to another, and from one sustainable domain to another if the technical and policy-related issues are not identified.

Evaluation of Environmental Impacts for Rice Agroecosystems using Life Cycle Assessment (LCA)

OpenAIRE

S. Khoramdel; J. Shabahang; A. Amin Ghafouri

2017-01-01

In order to evaluate life cycle assessment (LCA) for rice agroecosystems based on mean of nitrogen fertilizer levels (less than 190, 190-200, 200-210, 210-220 and more than 220 kg N ha) during 1999-2012, an experiment was conducted. Four steps includung goal definition and scoping, inventory analysis, life cycle impact assessment and integration and interpretation were computed. Functional unit was considered as one tone paddy. Impact categories were acidification, eutrophication in aquatic a...

Investigation of evaluation method for marine radiological impact during an accident

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-08-15

In 2012, JNES carried out to investigate the measurement information of radionuclide released to the ocean at Fukushima Daiichi NPP accident, the foreign regulation for marine radiological impact, and the evaluation method for release and diffusion to the ocean at the accident inside and outside Japan. (author)

Regional economic impact assessment: Evaluating remedial alternatives for the Portland Harbor Superfund Site, Portland, Oregon, USA.

Science.gov (United States)

Harrison, David; Coughlin, Conor; Hogan, Dylan; Edwards, Deborah A; Smith, Benjamin C

2018-01-01

The present paper describes a methodology for evaluating impacts of Superfund remedial alternatives on the regional economy in the context of a broader sustainability evaluation. Although economic impact methodology is well established, some applications to Superfund remedial evaluation have created confusion because of seemingly contradictory results. This confusion arises from failure to be explicit about 2 opposing impacts of remediation expenditures: 1) positive regional impacts of spending additional money in the region and 2) negative regional impacts of the need to pay for the expenditures (and thus forgo other expenditures in the region). The present paper provides a template for economic impact assessment that takes both positive and negative impacts into account, thus providing comprehensive estimates of net impacts. The paper also provides a strategy for identifying and estimating major uncertainties in the net impacts. The recommended methodology was applied at the Portland Harbor Superfund Site, located along the Lower Willamette River in Portland, Oregon, USA. The US Environmental Protection Agency (USEPA) developed remedial alternatives that it estimated would cost up to several billion dollars, with construction durations possibly lasting decades. The economic study estimated regional economic impacts-measured in terms of gross regional product (GRP), personal income, population, and employment-for 5 of the USEPA alternatives relative to the "no further action" alternative. Integr Environ Assess Manag 2018;14:32-42. © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC). © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Evaluation of economic impact of climatic change on agro-forestry systems

Directory of Open Access Journals (Sweden)

Vittorio Gallerani

Full Text Available Climate change has a strong influence on agro-forestry systems. Present estimations evisage that changes in climate patterns and extreme events connected to climate change will have greater impacts in the future. This paper seeks to illustrate the articulation of the problems concerning the economic evaluation of climate change, with particularly attention to open problems and future lines of research. Research on this topic, though using methods and approaches consolidated in the disciplines of resource economics and evaluation, still have several open problems, particularly in the field of multidisciplinary studies of the man-environmental relations, policy evaluation and development of decision support systems for decision makers.

Evaluating California local land use plan's environmental impact reports

International Nuclear Information System (INIS)

Tang Zhenghong; Bright, Elise; Brody, Samuel

2009-01-01

Local land use planning has profound impacts on environmental quality; however, few empirical studies have been conducted to systematically measure local land use plans' environmental assessment quality and to identify the factors influencing it. This paper analyzes the quality of 40 Environmental Impact Reports (EIRs) of local jurisdictions' land use plans in California. A plan evaluation protocol defined by five core components and sixty-three indicators is developed to measure the quality of local land use plans' EIRs. The descriptive results indicate that the local jurisdictions produce relatively good quality on its EIRs, but there is still much room for improvement. There are large variations in the quality of EIRs across local jurisdictions. The regression results further highlight three major factors that can significantly influence local land use plan's EIR quality: number of planners, plan updating ability, and development pressure

Evaluating impacts of Clean Air Act compliance strategies

International Nuclear Information System (INIS)

Shirer, D.A.; Evans, R.J.; Harrison, C.D.; Kehoe, D.B.

1993-01-01

The Clean Air Act Amendments of 1990 requires that by the year 2000, US SO 2 emissions must be reduced by 10 million tons. This requirement will have significant impact on coal-fired electric utilities. As a result, most utilities are currently evaluating numerous compliance options, including buying allowances, coal cleaning/blending/switching, and flue gas scrubbing. Moreover, each utility must address its own unique circumstances with regard to competition, efficiency, capital expenditures, reliability, etc. and many utilities may choose a combination of compliance options to simultaneously satisfy their environmental, performance, and financial objectives. The Coal Quality Expert, which is being developed under a clean coal technology project funded by US DOE and EPRI, will predict the economic, operational, and environmental benefits of using higher-quality coals and provides an assessment of the merits of various post-combustion control technologies for specific utility applications. This paper presents background on how utilities evaluate their compliance options, and it describes how the Coal Quality Expert could be used for such evaluations in the future to assure that each utility can select the best combination of coal specifications and emission control technologies to meet its compliance objectives

Development of a new simulation code for evaluation of criticality transients involving fissile solution boiling

International Nuclear Information System (INIS)

Basoglu, Benan; Yamamoto, Toshihiro; Okuno, Hiroshi; Nomura, Yasushi

1998-03-01

In this work, we report on the development of a new computer code named TRACE for predicting the excursion characteristics of criticality excursions involving fissile solutions. TRACE employs point neutronics coupled with simple thermal-hydraulics. The temperature, the radiolytic gas effects, and the boiling phenomena are estimated using the transient heat conduction equation, a lumped-parameter energy model, and a simple boiling model, respectively. To evaluate the model, we compared our results with the results of CRAC experiments. The agreement in these comparisons is quite satisfactory. (author)

Evaluating the impact of digital tools to teach math and science in ...

International Development Research Centre (IDRC) Digital Library (Canada)

Evaluating the impact of digital tools to teach math and science in Chile ... Caribbean countries fare poorly in international comparisons of learning assessments. ... to support governments grappling with intellectual property issues in an age of ...

Integrating social justice concerns into economic evaluation for healthcare and public health: A systematic review.

Science.gov (United States)

Dukhanin, Vadim; Searle, Alexandra; Zwerling, Alice; Dowdy, David W; Taylor, Holly A; Merritt, Maria W

2018-02-01

Social justice is the moral imperative to avoid and remediate unfair distributions of societal disadvantage. In priority setting in healthcare and public health, social justice reaches beyond fairness in the distribution of health outcomes and economic impacts to encompass fairness in the distribution of policy impacts upon other dimensions of well-being. There is an emerging awareness of the need for economic evaluation to integrate all such concerns. We performed a systematic review (1) to describe methodological solutions suitable for integrating social justice concerns into economic evaluation, and (2) to describe the challenges that those solutions face. To be included, publications must have captured fairness considerations that (a) involve cross-dimensional subjective personal life experience and (b) can be manifested at the level of subpopulations. We identified relevant publications using an electronic search in EMBASE, PubMed, EconLit, PsycInfo, Philosopher's Index, and Scopus, including publications available in English in the past 20 years. Two reviewers independently appraised candidate publications, extracted data, and synthesized findings in narrative form. Out of 2388 publications reviewed, 26 were included. Solutions sought either to incorporate relevant fairness considerations directly into economic evaluation or to report them alongside cost-effectiveness measures. The majority of reviewed solutions, if adapted to integrate social justice concerns, would require their explicit quantification. Four broad challenges related to the implementation of these solutions were identified: clarifying the normative basis; measuring and determining the relative importance of criteria representing that basis; combining the criteria; and evaluating trade-offs. All included solutions must grapple with an inherent tension: they must either face the normative and operational challenges of quantifying social justice concerns or accede to offering incomplete policy

Using Impact-Relevant Sensitivities to Efficiently Evaluate and Select Climate Change Scenarios

Science.gov (United States)

Vano, J. A.; Kim, J. B.; Rupp, D. E.; Mote, P.

2014-12-01

We outline an efficient approach to help researchers and natural resource managers more effectively use global climate model information in their long-term planning. The approach provides an estimate of the magnitude of change of a particular impact (e.g., summertime streamflow) from a large ensemble of climate change projections prior to detailed analysis. These estimates provide both qualitative information as an end unto itself (e.g., the distribution of future changes between emissions scenarios for the specific impact) and a judicious, defensible evaluation structure that can be used to qualitatively select a sub-set of climate models for further analysis. More specifically, the evaluation identifies global climate model scenarios that both (1) span the range of possible futures for the variable/s most important to the impact under investigation, and (2) come from global climate models that adequately simulate historical climate, providing plausible results for the future climate in the region of interest. To identify how an ecosystem process responds to projected future changes, we methodically sample, using a simple sensitivity analysis, how an impact variable (e.g., streamflow magnitude, vegetation carbon) responds locally to projected regional temperature and precipitation changes. We demonstrate our technique over the Pacific Northwest, focusing on two types of impacts each in three distinct geographic settings: (a) changes in streamflow magnitudes in critical seasons for water management in the Willamette, Yakima, and Upper Columbia River basins; and (b) changes in annual vegetation carbon in the Oregon and Washington Coast Ranges, Western Cascades, and Columbia Basin ecoregions.

Evaluation of Haddam Neck (Connecticut Yankee) Nuclear Power Plant, environmental impact prediction, based on monitoring programs

International Nuclear Information System (INIS)

Gore, K.L.; Thomas, J.M.; Kannberg, L.D.; Mahaffey, J.A.; Waton, D.G.

1976-12-01

A study was undertaken by the U.S. Nuclear Regulatory Commission (NRC) to evaluate the nonradiological environmental data obtained from three nuclear power plants operating for a period of one year or longer. The document presented reports the second of three nuclear power plants to be evaluated in detail by Battelle, Pacific Northwest Laboratories. Haddam Neck (Connecticut Yankee) Nuclear Power Plant nonradiological monitoring data were assessed to determine their effectiveness in the measurement of environmental impacts. Efforts were made to determine if: (1) monitoring programs, as designed, can detect environmental impacts, (2) appropriate statistical analyses were performed and if they were sensitive enough to detect impacts, (3) predicted impacts could be verified by monitoring programs, and (4) monitoring programs satisfied the requirements of the Environmental Technical Specifications. Both preoperational and operational monitoring data were examined to test the usefulness of baseline information in evaluating impacts. This included an examination of the methods used to measure ecological, chemical, and physical parameters, and an assessment of sampling periodicity and sensitivity where appropriate data sets were available. From this type of analysis, deficiencies in both preoperational and operational monitoring programs may be identified and provide a basis for suggested improvement

Accessibility measures: review and applications. Evaluation of accessibility impacts of land-use transportation scenarios, and related social and economic impact

OpenAIRE

Geurs KT; Ritsema van Eck JR; Universiteit Utrecht-URU; LAE

2001-01-01

This report describes an extensive literature study and three case studies aimed at reviewing accessibility measures for their ability to evaluate the accessibility impacts of national land-use and transport scenarios, and related social and economic impacts. Several activity- and utility-based accessibility measures were computed to analyse job accessibility by car and public transport in the Netherlands for: (1) the (base) year 1995, (2) a Trend, or business-as-usual, scenario, representing...

A Finite-Difference Solution of Solute Transport through a Membrane Bioreactor

Directory of Open Access Journals (Sweden)

B. Godongwana

2015-01-01

Full Text Available The current paper presents a theoretical analysis of the transport of solutes through a fixed-film membrane bioreactor (MBR, immobilised with an active biocatalyst. The dimensionless convection-diffusion equation with variable coefficients was solved analytically and numerically for concentration profiles of the solutes through the MBR. The analytical solution makes use of regular perturbation and accounts for radial convective flow as well as axial diffusion of the substrate species. The Michaelis-Menten (or Monod rate equation was assumed for the sink term, and the perturbation was extended up to second-order. In the analytical solution only the first-order limit of the Michaelis-Menten equation was considered; hence the linearized equation was solved. In the numerical solution, however, this restriction was lifted. The solution of the nonlinear, elliptic, partial differential equation was based on an implicit finite-difference method (FDM. An upwind scheme was employed for numerical stability. The resulting algebraic equations were solved simultaneously using the multivariate Newton-Raphson iteration method. The solution allows for the evaluation of the effect on the concentration profiles of (i the radial and axial convective velocity, (ii the convective mass transfer rates, (iii the reaction rates, (iv the fraction retentate, and (v the aspect ratio.

Properties of altered soils by alkaline solution: contribution in the performance evaluation of repositories

International Nuclear Information System (INIS)

Calabria, Jaqueline Alves de Almeida

2015-01-01

evaluated samples (less than 20% after 10 days of equilibrium), being the best performance one, the nitosoil sample whose K_d values varied from 11.78 to 63.05 mL.g"-"1. In a subsequent step, the clay soil, was submitted to the alkaline solution interaction, in order to investigate possible alterations on the sorption properties and hydraulic conductivity of this soil. Using the sorption parameters, obtained from data fitted isotherms, the retardation factor, R, was estimated for the samples before and after the interaction. It was demonstrated that the alkaline alteration promotes damages to sorption properties of Cs, once the R became significantly smaller (about 1000 times) after the interaction. The hydraulic conductivity in turn increased slightly (3,91x10"-"8 cm.s"-"1 to 5,08 x 10"-"8 cm.s"-"1). It was concluded that these changes were due, mainly, to the dissolution of minerals present in the clay soil (kaolinite and quartz), associated with the incorporation of K and Ca from the alkaline solution, resulting, probably, in the formation of hydrated calcium silicate phases. Additionally, the effects of alkaline solution on the properties of a commercial bentonite were studied. Contrary to the clay soil, it was observed a gain in the sorption characteristics, with K_d (Cs) increasing from 760.05 mL.g"-"1to 1311.80 mL.g"-"1and Q_m_a_x from 36.32 mg.g"-"1to 52.13 mg.g"-"1, with the corresponding increase in the retardation coefficient, R. The dissolution of the clay minerals from the initial sample and the incorporation of Mg, K e Ca coming from the alkaline solution, generating smectite of different kinds, were considered as the main mineralogical changes responsible for the modifications in sorption parameters. The different behavior between the two evaluated samples, soil and bentonite, confirms that the nature and extension of changes observed, when mineral samples interact with alkaline solution, depend on the chemical/mineralogical composition of the solid material

Evaluating Modeled Impact Metrics for Human Health, Agriculture Growth, and Near-Term Climate

Science.gov (United States)

Seltzer, K. M.; Shindell, D. T.; Faluvegi, G.; Murray, L. T.

2017-12-01

Simulated metrics that assess impacts on human health, agriculture growth, and near-term climate were evaluated using ground-based and satellite observations. The NASA GISS ModelE2 and GEOS-Chem models were used to simulate the near-present chemistry of the atmosphere. A suite of simulations that varied by model, meteorology, horizontal resolution, emissions inventory, and emissions year were performed, enabling an analysis of metric sensitivities to various model components. All simulations utilized consistent anthropogenic global emissions inventories (ECLIPSE V5a or CEDS), and an evaluation of simulated results were carried out for 2004-2006 and 2009-2011 over the United States and 2014-2015 over China. Results for O3- and PM2.5-based metrics featured minor differences due to the model resolutions considered here (2.0° × 2.5° and 0.5° × 0.666°) and model, meteorology, and emissions inventory each played larger roles in variances. Surface metrics related to O3 were consistently high biased, though to varying degrees, demonstrating the need to evaluate particular modeling frameworks before O3 impacts are quantified. Surface metrics related to PM2.5 were diverse, indicating that a multimodel mean with robust results are valuable tools in predicting PM2.5-related impacts. Oftentimes, the configuration that captured the change of a metric best over time differed from the configuration that captured the magnitude of the same metric best, demonstrating the challenge in skillfully simulating impacts. These results highlight the strengths and weaknesses of these models in simulating impact metrics related to air quality and near-term climate. With such information, the reliability of historical and future simulations can be better understood.

A Final Report for the Evaluation of the Achieve3000 Programs

Science.gov (United States)

Shannon, Lisa; Grant, Billie-Jo

2015-01-01

Achieve3000 publishes a number of online literacy programs that differentiate lessons and activities based on student performance. Magnolia Consulting--an independent, third party evaluation firm--assessed Achieve3000 Solutions' impact on student learning during the 2014-15 school year. The researchers used a randomized control trial, where…

Decontamination solution development studies

International Nuclear Information System (INIS)

Allen, R.P.; Fetrow, L.K.; Kjarmo, H.E.; Pool, K.H.

1993-09-01

This study was conducted for the Westinghouse Hanford Company (WHC) by Pacific Northwest Laboratory (PNL) as part of the Hanford Grout Technology Program (HGTP). The objective of this study was to identify decontamination solutions capable of removing radioactive contaminants and grout from the Grout Treatment Facility (GTF) process equipment and to determine the impact of these solutions on equipment components and disposal options. The reference grout used in this study was prepared with simulated double-shell slurry feed (DSSF) and a dry blend consisting of 40 wt % limestone flour, 28 wt % blast furnace slag, 28 wt % fly ash, and 4 wt % type I/II Portland cement

Developing guidelines for economic evaluation of environmental impacts in EIAs. Part I

International Nuclear Information System (INIS)

2005-01-01

Is the time right to introduce environmental evaluation into the Environmental Impact Assessment (EIA) system for large construction projects in China? The report analyses gaps to introducing environmental evaluation into EIAs and recommend how to bridge the gaps. The report also provides suggestions to the State Environmental Protection Administration on core elements of a guideline for environmental evaluation to include in the existing EIA guidelines. The report draws on international and Chinese research and best practice and conducts four case studies of environmental evaluation based on EIAs of investment projects e.g. a power plant, a waste water treatment plant, regional waste water irrigation, and a road construction project

Developing guidelines for economic evaluation of environmental impacts in EIAs. Part I

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

Is the time right to introduce environmental evaluation into the Environmental Impact Assessment (EIA) system for large construction projects in China? The report analyses gaps to introducing environmental evaluation into EIAs and recommend how to bridge the gaps. The report also provides suggestions to the State Environmental Protection Administration on core elements of a guideline for environmental evaluation to include in the existing EIA guidelines. The report draws on international and Chinese research and best practice and conducts four case studies of environmental evaluation based on EIAs of investment projects e.g. a power plant, a waste water treatment plant, regional waste water irrigation, and a road construction project.

Plutonium recovery from carbonate wash solutions

International Nuclear Information System (INIS)

Gray, J.H.; Reif, D.J.; Chostner, D.F.; Holcomb, H.P.

1991-01-01

540Periodically higher than expected levels of plutonium are found in carbonate solutions used to wash second plutonium cycle solvent. The recent accumulation of plutonium in carbonate wash solutions has led to studies to determine the cause of that plutonium accumulation, to evaluate the quality of all canyon solvents, and to develop additional criteria needed to establish when solvent quality is acceptable. Solvent from three canyon solvent extraction cycles was used to evaluate technology required to measure tributyl phosphate (TBP) degradation products and was used to evaluate solvent quality criteria during the development of plutonium recovery processes. 1 fig

Impact Evaluation Study for Institution Strengthening of Social Food Distribution

Directory of Open Access Journals (Sweden)

Budiman Notoatmojo

2016-03-01

Full Text Available The general objectives of this study were to evaluate whether the implementation of activities for strengthening LDPM could achieve the expected goals, to evaluate whether the LDPM strengthening activities had a positive impact. The study analysis used was descriptive, comparison, and financial analysis. The results of this study have shown that LDPM farmers’ income have increased significantly, and the Gapoktan as LPDM farmers’ institution has been significantly developing as a Bulog function in procuring grain paddy from farmers during peak harvest and distributing rice to stabilize the price of rice during the limited rice in the market.

Access to water: Technical and social solutions help communities ...

International Development Research Centre (IDRC) Digital Library (Canada)

Access to water: Technical and social solutions help communities make the most of available sources. 08 décembre 2010. Image. IDRC Communications. LASTING IMPACTS. IDRC-supported research engages communities, and countries, in developing durable solutions to water problems. Whatever the challenge, people ...

Evaluating impact level of different factors in environmental impact assessment for incinerator plants using GM (1, N) model.

Science.gov (United States)

Pai, T Y; Chiou, R J; Wen, H H

2008-01-01

In this study, the impact levels in environmental impact assessment (EIA) reports of 10 incinerator plants were quantified and discussed. The relationship between the quantified impact levels and the plant scale factors of BeiTou, LiZe, BaLi, LuTsao, RenWu, PingTung, SiJhou and HsinChu were constructed, and the impact levels of the GangShan (GS) and YongKong (YK) plants were predicted using grey model GM (1, N). Finally, the effects of plant scale factors on impact levels were evaluated using grey model GM (1, N) too. According to the predicted results of GM, the relative errors of topography/geology/soil, air quality, hydrology/water quality, solid waste, noise, terrestrial fauna/flora, aquatic fauna/flora and traffic in the GS plant were 17%, 14%, 15%, 17%, 75%, 16%, 13%, and 37%, respectively. The relative errors of the same environmental items in the YK plant were 1%, 18%, 10%, 40%, 37%, 3%, 25% and 33%, respectively. According to GM (1, N), design capacity (DC) and heat value (HV) were the plant scale factors that affected the impact levels significantly in each environmental item, and thus were the most significant plant scale factors. GM (1, N) was effective in predicting the environmental impact and analyzing the reasonableness of the impact. If there is an EIA for a new incinerator plant to be reviewed in the future, the official committee of the Taiwan EPA could review the reasonableness of impact levels in EIA reports quickly.

The Mixing of Methods: a three-step process for improving rigour in impact evaluations

NARCIS (Netherlands)

Ton, G.

2012-01-01

This article describes a systematic process that is helpful in improving impact evaluation assignments, within restricted budgets and timelines. It involves three steps: a rethink of the key questions of the evaluation to develop more relevant, specific questions; a way of designing a mix of

Impact evaluation of conducted UWB transients on loads in power-line networks

Science.gov (United States)

Li, Bing; Månsson, Daniel

2017-09-01

Nowadays, faced with the ever-increasing dependence on diverse electronic devices and systems, the proliferation of potential electromagnetic interference (EMI) becomes a critical threat for reliable operation. A typical issue is the electronics working reliably in power-line networks when exposed to electromagnetic environment. In this paper, we consider a conducted ultra-wideband (UWB) disturbance, as an example of intentional electromagnetic interference (IEMI) source, and perform the impact evaluation at the loads in a network. With the aid of fast Fourier transform (FFT), the UWB transient is characterized in the frequency domain. Based on a modified Baum-Liu-Tesche (BLT) method, the EMI received at the loads, with complex impedance, is computed. Through inverse FFT (IFFT), we obtain time-domain responses of the loads. To evaluate the impact on loads, we employ five common, but important quantifiers, i.e., time-domain peak, total signal energy, peak signal power, peak time rate of change and peak time integral of the pulse. Moreover, to perform a comprehensive analysis, we also investigate the effects of the attributes (capacitive, resistive, or inductive) of other loads connected to the network, the rise time and pulse width of the UWB transient, and the lengths of power lines. It is seen that, for the loads distributed in a network, the impact evaluation of IEMI should be based on the characteristics of the IEMI source, and the network features, such as load impedances, layout, and characteristics of cables.

Reuse of hydroponic waste solution.

Science.gov (United States)

Kumar, Ramasamy Rajesh; Cho, Jae Young

2014-01-01

Attaining sustainable agriculture is a key goal in many parts of the world. The increased environmental awareness and the ongoing attempts to execute agricultural practices that are economically feasible and environmentally safe promote the use of hydroponic cultivation. Hydroponics is a technology for growing plants in nutrient solutions with or without the use of artificial medium to provide mechanical support. Major problems for hydroponic cultivation are higher operational cost and the causing of pollution due to discharge of waste nutrient solution. The nutrient effluent released into the environment can have negative impacts on the surrounding ecosystems as well as the potential to contaminate the groundwater utilized by humans for drinking purposes. The reuse of non-recycled, nutrient-rich hydroponic waste solution for growing plants in greenhouses is the possible way to control environmental pollution. Many researchers have successfully grown several plant species in hydroponic waste solution with high yield. Hence, this review addresses the problems associated with the release of hydroponic waste solution into the environment and possible reuse of hydroponic waste solution as an alternative resource for agriculture development and to control environmental pollution.

Impact of Digital Tooth Preparation Evaluation Technology on Preclinical Dental Students' Technical and Self-Evaluation Skills.

Science.gov (United States)

Gratton, David G; Kwon, So Ran; Blanchette, Derek; Aquilino, Steven A

2016-01-01

The aim of this study was to evaluate the effect of digital tooth preparation imaging and evaluation technology on dental students' technical abilities, self-evaluation skills, and the assessment of their simulated clinical work. A total of 80 second-year students at one U.S. dental school were assigned to one of three groups: control (n=40), E4D Compare (n=20), and Sirona prepCheck (n=20). Students in the control group were taught by traditional teaching methodologies, and the technology-assisted groups received both traditional training and supplementary feedback from the corresponding digital system. Three outcomes were measured: faculty technical score, self-evaluation score, and E4D Compare scores at 0.30 mm tolerance. Correlations were determined between the groups' scores from visual assessment and self-evaluation and between the visual assessment and digital scores. The results showed that the visual assessment and self-evaluation scores did not differ among groups (p>0.05). Overall, correlations between visual and digital assessment scores were modest though statistically significant (5% level of significance). These results suggest that the use of digital tooth preparation evaluation technology did not impact the students' prosthodontic technical and self-evaluation skills. Visual scores given by faculty and digital assessment scores correlated moderately in only two instances.

Modified Bateman solution for identical eigenvalues

International Nuclear Information System (INIS)

Dreher, Raymond

2013-01-01

Highlights: ► Solving indeterminacies due to identical eigenvalues in Bateman’s solution. ► Exact analytical solution of Bateman’s equations for identical eigenvalues. ► Algorithm calculating higher order derivatives appearing in this solution. ► Alternative evaluation of the derivatives through the Taylor polynomial. ► Implementation of an example program demonstrating the developed solution. - Abstract: In this paper we develop a general solution to the Bateman equations taking into account the special case of identical eigenvalues. A characteristic of this new solution is the presence of higher order derivatives. It is shown that the derivatives can be obtained analytically and also computed in an efficient manner

Theorising interprofessional pedagogic evaluation: framework for evaluating the impact of interprofessional CPD on practice change

OpenAIRE

Payler, Jane; Meyer, Edgar; Humphris, Debra

2007-01-01

This study outlines the development of a conceptual framework to guide the evaluation of the impact of the pedagogy employed in continuing professional development for professionals in education, health and social care. The work is developed as part of the Centre for Excellence in Teaching and Learning: Interprofessional Learning across the Public Sector (CETL: IPPS) at the University of Southampton. The study briefly outlines the field for pedagogic research and comments on the underpinning ...

Impact of computerized order entry and pre-mixed dialysis solutions for continuous veno-venous hemodiafiltration on selection of therapy for acute renal failure.

Science.gov (United States)

Saadulla, Lawand; Reeves, W Brian; Irey, Brittany; Ghahramani, Nasrollah

2012-02-01

To investigate the impacts of availability of pre-mixed solutions and computerized order entry on nephrologists' choice of the initial mode of renal replacement therapy in acute renal failure. We studied 898 patients with acute renal failure in 3 consecutive eras: era 1 (custom-mixed solution; n = 309), era 2 (pre-mixed commercial solution; n = 324), and era 3 (post-computerized order entry; n = 265). The proportion of patients treated with renal replacement therapy and the time from consult to initiation of continuous renal replacement therapy was similar in the 3 eras. Following introduction of the pre-mixed solution, the proportion of patients treated with continuous renal replacement therapy increased (20% vs. 33%; p mixed solution increases the likelihood of initiating continuous renal replacement therapy in acute renal failure, initiating it at a lower creatinine and for older patients, use of continuous veno-venous hemodialysis and higher prescribed continuous renal replacement therapy dose. Computerized order entry implementation is associated with an additional increase in the use of continuous veno-venous hemodialysis, higher total prescribed dialysis dose, and use of CRRT among an increasing number of patients not on mechanical ventilation. The effect of these changes on patient survival is not significant.

Measurement and evaluation of the water and the salt solutions occurring in the exploitation of rock salt, potash or copper shale deposits in the Bernburg Hauptsattel or the Sangerhaeuser Revier in order to assess the long-term safety of repositories

International Nuclear Information System (INIS)

Schwandt, A.

1993-01-01

For a thorough assessment of conditions governing the occurrence of salt solutions or water in a repository in the Zechstein, i.e. in the salt formation and at its boundaries, data measured in other mines developed in this formation can yield valuable information. The studies reported were based on geological, hydrogeological, geochemical and geomechanical data collected for more than 50 inflow areas or salt solution bearing areas, covering approx. 15,000 chemical or physical analyses from which the data were derived describing the characteristics or development of inflow streams with time. In addition, the mapped inflow streams were evaluated with a view to the geological and hydrogeological and the geomechanical conditions of origin, as well as engineering impacts. (DG) [de

Impact of Glycolate Anion on Aqueous Corrosion in DWPF and Downstream Facilities

Energy Technology Data Exchange (ETDEWEB)

Mickalonis, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-07-12

Glycolic acid is being evaluated as an alternate reductant in the preparation of high level waste for the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS). During processing, the glycolic acid may not be completely consumed with small quantities of the glycolate anion being carried forward to other high level waste (HLW) facilities. The SRS liquid waste contractor requested an assessment of the impact of the glycolate anion on the corrosion of the materials of construction (MoC) throughout the waste processing system since this impact had not been previously evaluated. A literature review revealed that corrosion data were not available for the MoCs in glycolic-bearing solutions applicable to SRS systems. Data on the material compatibility with only glycolic acid or its derivative products were identified; however, data were limited for solutions containing glycolic acid or the glycolate anion. For the proprietary coating systems applied to the DWPF concrete, glycolic acid was deemed compatible since the coatings were resistant to more aggressive chemistries than glycolic acid. Additionally similar coating resins showed acceptable resistance to glycolic acid.

Impact of Glycolate Anion on Aqueous Corrosion in DWPF and Downstream Facilities

Energy Technology Data Exchange (ETDEWEB)

Mickalonis, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-11-20

Glycolic acid is being evaluated as an alternate reductant in the preparation of high level waste for the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS). During processing, the glycolic acid may not be completely consumed with small quantities of the glycolate anion being carried forward to other high level waste (HLW) facilities. The SRS liquid waste contractor requested an assessment of the impact of the glycolate anion on the corrosion of the materials of construction (MoC) throughout the waste processing system since this impact had not been previously evaluated. A literature review revealed that corrosion data were not available for the MoCs in glycolic-bearing solutions applicable to SRS systems. Data on the material compatibility with only glycolic acid or its derivative products were identified; however, data were limited for solutions containing glycolic acid or the glycolate anion. For the proprietary coating systems applied to the DWPF concrete, glycolic acid was deemed compatible since the coatings were resistant to more aggressive chemistries than glycolic acid. Additionally, similar coating resins showed acceptable resistance to glycolic acid.

Assessment of applications of transport models on regional scale solute transport

Science.gov (United States)

Guo, Z.; Fogg, G. E.; Henri, C.; Pauloo, R.

2017-12-01

Regional scale transport models are needed to support the long-term evaluation of groundwater quality and to develop management strategies aiming to prevent serious groundwater degradation. The purpose of this study is to evaluate the capacity of previously-developed upscaling approaches to accurately describe main solute transport processes including the capture of late-time tails under changing boundary conditions. Advective-dispersive contaminant transport in a 3D heterogeneous domain was simulated and used as a reference solution. Equivalent transport under homogeneous flow conditions were then evaluated applying the Multi-Rate Mass Transfer (MRMT) model. The random walk particle tracking method was used for both heterogeneous and homogeneous-MRMT scenarios under steady state and transient conditions. The results indicate that the MRMT model can capture the tails satisfactorily for plume transported with ambient steady-state flow field. However, when boundary conditions change, the mass transfer model calibrated for transport under steady-state conditions cannot accurately reproduce the tailing effect observed for the heterogeneous scenario. The deteriorating impact of transient boundary conditions on the upscaled model is more significant for regions where flow fields are dramatically affected, highlighting the poor applicability of the MRMT approach for complex field settings. Accurately simulating mass in both mobile and immobile zones is critical to represent the transport process under transient flow conditions and will be the future focus of our study.

Evaluation of the feasibility, economic impact, and effectiveness of underground nuclear power plants. Final technical report

International Nuclear Information System (INIS)

1978-05-01

Information on underground nuclear power plants is presented concerning underground nuclear power plant concepts; public health impacts; technical feasibility of underground concepts; economic impacts of underground construction; and evaluation of related issues

Impact evaluation on health: three case studies for Colombia

OpenAIRE

Gaviria Garces, Carlos Felipe

2017-01-01

The present work uses impact evaluation tools in health economics to analyze three different issues in Colombia. The first issue is how losing health insurance for young adults affects medical service usage and health outcomes. Results show that losing health insurance when turning 18 years old increases visits to the ED, reduces preventive care visits with a physician, and increases the usage of private medical services (out-of-pocket) for young adults. For the second issue, we measure how e...

Diquafosol sodium ophthalmic solution for the treatment of dry eye: clinical evaluation and biochemical analysis of tear composition.

Science.gov (United States)

Shigeyasu, Chika; Yamada, Masakazu; Akune, Yoko; Tsubota, Kazuo

2015-11-01

To evaluate the clinical efficacy of 3% diquafosol sodium ophthalmic solution for dry eye, and to analyze the concentration of tear proteins and mucin-like substances after the treatment. Fifty eyes of 25 patients with dry eye syndrome were prospectively enrolled. The patients were treated with diquafosol solution at a dose of 1 drop in each eye 6 times daily for 4 weeks. The parameters of clinical efficacy were tear osmolarity, tear breakup time (BUT), fluorescein staining scores for the cornea and conjunctiva, Schirmer test values, and subjective symptoms evaluated using the ocular surface disease index (OSDI). Tears collected with Schirmer test strips were analyzed by high-performance liquid chromatography, and the concentrations of the total protein and the 4 major tear proteins, namely, secretory IgA, lactoferrin, lipocalin-1, lysozyme, and N-acetyl-neuraminic acid (Neu5Ac), were measured. Neu5Ac is a major sialic acid, a marker of secretory mucins. The BUT, keratoconjunctival staining scores, and Schirmer test values were improved with statistical significance after the treatment with diquafosol solution, while changes in the other parameters, including tear osmolarity, corneal staining scores, and OSDI scores were not significant. The Neu5Ac concentration was significantly increased, which was not accompanied by changes in tear proteins. Topical application of diquafosol significantly improved the clinical parameters of the BUT, keratoconjunctival staining scores, and Schirmer test values and was accompanied by increased sialic acid content in the tears of patients with dry eye.

The Solutions Project: Educating the Public and Policy Makers About Solutions to Global Warming, Air Pollution, and Energy Security

Science.gov (United States)

Jacobson, M. Z.

2015-12-01

Three major global problems of our times are global warming, air pollution mortality and morbidity, and energy insecurity. Whereas, policy makers with the support of the public must implement solutions to these problems, it is scientists and engineers who are best equipped to evaluate technically sound, optimal, and efficient solutions. Yet, a disconnect exists between information provided by scientists and engineers and policies implemented. Part of the reason is that scientific information provided to policy makers and the public is swamped out by information provided by lobbyists and another part is the difficulty in providing information to the hundreds of millions of people who need it rather than to just a few thousand. What other ways are available, aside from issuing press releases on scientific papers, for scientists to disseminate information? Three growing methods are through social media, creative media, and storytelling. The Solutions Project is a non-profit non-governmental organization whose goal is to bring forth scientific information about 100% clean, renewable energy plans to the public, businesses, and policy makers using these and related tools. Through the use of social media, the development of engaging internet and video content, and storytelling, the group hopes to increase the dissemination of information for social good. This talk discusses the history and impacts to date of this group and its methods. Please see www.thesolutionsproject.org and 100.org for more information.

Renewable energy integration challenges and solutions

CERN Document Server

Hossain, Jahangir

2014-01-01

This book examines challenges involved in the integration of renewable energy into existing electricity grids. It provides models of power systems to show how the integration will effect conventional grids and various solutions to minimize the impacts.

Evaluation of residual strength in the basalt fiber reinforced composites under impact damage

Science.gov (United States)

Kim, Yun-Hae; Lee, Jin-Woo; Moon, Kyung-Man; Yoon, Sung-Won; Baek, Tae-Sil; Hwang, Kwang-Il

2015-03-01

Composites are vulnerable to the impact damage by the collision as to the thickness direction, because composites are being manufactured by laminating the fiber. The understanding about the retained strength after the impact damage of the material is essential in order to secure the reliability of the structure design using the composites. In this paper, we have tried to evaluate the motion of the material according to the kinetic energy and potential energy and the retained strength after impact damage by testing the free fall test of the basalt fiber reinforced composite in the limelight as the environment friendly characteristic.

[Preparation and evaluation of stationary phase of high performance liquid chromatography for the separation of basic solutes].

Science.gov (United States)

Wang, P; Wang, J; Cong, R; Dong, B

1997-05-01

A bonded phase for high performance liquid chromatography (HPLC) has been prepared by the new reaction between silica and silicon ether. The ether was synthesized from alkylchlorosilane and pentane-2,4-dione in the presence of imidazole under inert conditions by using anhydrous tetrahydrofuran as solvent. The bonded phase thus obtained was characterized by elemental analysis, diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy and HPLC evaluation. The carbon content was 9.4% and the surface coverage almost attained 3.0micromol/m2 without end-capping. The silanol absorption peaks of the product cannot be observed from the DRIFT spectrum, which revealed that the silanization reaction proceeded thoroughly. The basic solutes, such as aniline, o-toluidine, p-toluidine, N,N-dimethylaniline and pyridine were used as the probe solutes to examine their interaction with the residual silanols on the surface of the products. No buffer or salt was used in the mobile phase for these experiments. In comparison with an acidic solute, such as, phenol, basic aniline eluted in front of phenol, and the ratio of asymmetry of aniline peak to that of the phenol peak was 1.1. Furthermore the relative k' value of p-toluidine to that of o-toluidine was also 1.1. All the results showed that the stationary phase has better quality and reproducibility and can be used for the separation of basic solutes efficiently.

76 FR 27363 - Proposed Information Collection Request (ICR) for the Impact Evaluation of the YouthBuild Program...

Science.gov (United States)

2011-05-11

... characteristics? What are YouthBuild's impacts on crime and delinquency? What are the program's impacts on social... (ICR) for the Impact Evaluation of the YouthBuild Program; Comment Request AGENCY: Employment and..., collection instruments are clearly understood, and [[Page 27364

Agro-fuels: southern impacts; Agrocarburants: impacts au Sud

Energy Technology Data Exchange (ETDEWEB)

Duterme, B.

2011-07-01

At a time of controversies about global warming, agro-fuels production is often presented as a future solution for automotive fuels and as a new way of development for southern countries. However, in Asia, South America and Africa, it very often takes the form of huge mono-culture areas of sugar cane, palm oil and soy bean in the hands of multinational companies of the agriculture and food industry. The consequences of these land, social and environmental impacts in Southern countries is an increase of disequilibria and a threat for the diet of local populations by changing the appropriation of lands. Deforestation, private monopolization of lands, concentration of profits, soils and water pollution, biodiversity impoverishment, exploitation of vulnerable manpower, populations migration, violation of human rights are today the consequences of mass production of agro-fuels in Southern countries. To what conditions a fair re-appropriation and a sustainable development of agro-fuels production and consumption is foreseeable? The solutions require a re-shaping of economical and agricultural politics. The book gathers testimonies and analyses from specialists who have evaluated locally the consequences of these energy choices. (J.S.)

The impact of 14-nm photomask uncertainties on computational lithography solutions

Science.gov (United States)

Sturtevant, John; Tejnil, Edita; Lin, Tim; Schultze, Steffen; Buck, Peter; Kalk, Franklin; Nakagawa, Kent; Ning, Guoxiang; Ackmann, Paul; Gans, Fritz; Buergel, Christian

2013-04-01

Computational lithography solutions rely upon accurate process models to faithfully represent the imaging system output for a defined set of process and design inputs. These models, which must balance accuracy demands with simulation runtime boundary conditions, rely upon the accurate representation of multiple parameters associated with the scanner and the photomask. While certain system input variables, such as scanner numerical aperture, can be empirically tuned to wafer CD data over a small range around the presumed set point, it can be dangerous to do so since CD errors can alias across multiple input variables. Therefore, many input variables for simulation are based upon designed or recipe-requested values or independent measurements. It is known, however, that certain measurement methodologies, while precise, can have significant inaccuracies. Additionally, there are known errors associated with the representation of certain system parameters. With shrinking total CD control budgets, appropriate accounting for all sources of error becomes more important, and the cumulative consequence of input errors to the computational lithography model can become significant. In this work, we examine with a simulation sensitivity study, the impact of errors in the representation of photomask properties including CD bias, corner rounding, refractive index, thickness, and sidewall angle. The factors that are most critical to be accurately represented in the model are cataloged. CD Bias values are based on state of the art mask manufacturing data and other variables changes are speculated, highlighting the need for improved metrology and awareness.

Influence of thermal treatment on bentonite used as adsorbent for Cd, Pb, Zn retention from mono-solute and poly-solute aqueous solutions

Directory of Open Access Journals (Sweden)

Susana Yamila Martinez Stagnaro

2012-08-01

Full Text Available The retentions of Zn, Cd and Pb cations by one treated bentonite up to 750 °C were analyzed. The retentions were evaluated by using mono-and poly-solute aqueous solutions of such cations. The adsorptions were carried out in batch system at room temperature. The solid/liquid ratio was 2% wt.v-1. The solids were characterized by X-ray diffraction, thermal and chemical analyses. The Zn cation from mono- or polysolute-solutions was retained in higher amount than Cd and Pb cations in similar solution types by bentonite. The retentions were effective up to 450 °C calcined bentonite, after that, the retention capacity decreased in concordance with dehydroxylation of the structure of clay minerals.

Automated MAD and MIR structure solution

International Nuclear Information System (INIS)

Terwilliger, Thomas C.; Berendzen, Joel

1999-01-01

A fully automated procedure for solving MIR and MAD structures has been developed using a scoring scheme to convert the structure-solution process into an optimization problem. Obtaining an electron-density map from X-ray diffraction data can be difficult and time-consuming even after the data have been collected, largely because MIR and MAD structure determinations currently require many subjective evaluations of the qualities of trial heavy-atom partial structures before a correct heavy-atom solution is obtained. A set of criteria for evaluating the quality of heavy-atom partial solutions in macromolecular crystallography have been developed. These have allowed the conversion of the crystal structure-solution process into an optimization problem and have allowed its automation. The SOLVE software has been used to solve MAD data sets with as many as 52 selenium sites in the asymmetric unit. The automated structure-solution process developed is a major step towards the fully automated structure-determination, model-building and refinement procedure which is needed for genomic scale structure determinations

Direct visualization of solute locations in laboratory ice samples

Directory of Open Access Journals (Sweden)

T. Hullar

2016-09-01

Full Text Available Many important chemical reactions occur in polar snow, where solutes may be present in several reservoirs, including at the air–ice interface and in liquid-like regions within the ice matrix. Some recent laboratory studies suggest chemical reaction rates may differ in these two reservoirs. While investigations have examined where solutes are found in natural snow and ice, few studies have examined either solute locations in laboratory samples or the possible factors controlling solute segregation. To address this, we used micro-computed tomography (microCT to examine solute locations in ice samples prepared from either aqueous cesium chloride (CsCl or rose bengal solutions that were frozen using several different methods. Samples frozen in a laboratory freezer had the largest liquid-like inclusions and air bubbles, while samples frozen in a custom freeze chamber had somewhat smaller air bubbles and inclusions; in contrast, samples frozen in liquid nitrogen showed much smaller concentrated inclusions and air bubbles, only slightly larger than the resolution limit of our images (∼ 2 µm. Freezing solutions in plastic vs. glass vials had significant impacts on the sample structure, perhaps because the poor heat conductivity of plastic vials changes how heat is removed from the sample as it cools. Similarly, the choice of solute had a significant impact on sample structure, with rose bengal solutions yielding smaller inclusions and air bubbles compared to CsCl solutions frozen using the same method. Additional experiments using higher-resolution imaging of an ice sample show that CsCl moves in a thermal gradient, supporting the idea that the solutes in ice are present in mobile liquid-like regions. Our work shows that the structure of laboratory ice samples, including the location of solutes, is sensitive to the freezing method, sample container, and solute characteristics, requiring careful experimental design and interpretation of results.

Economic impact evaluation of the Procap 1000: Deep Water Qualification Program from PETROBRAS

International Nuclear Information System (INIS)

Furtado, Andre T.; Pereira, Newton M.; Suslick, Saul; Freitas, Adriana G. de; Bach, Laurent

1999-01-01

PETROBRAS, a Brazilian petroleum company, managed between 1986 and 1992 a program with purpose to dominate the necessary technology for the petroleum production up to 1000 meters depth. This program was going called Procap 1000. The aim of the work was to evaluate the impacts of Procap 1000. The proposed evaluation method by Beta was going used. The results are presented

Evaluating the implementation and impacts of middle grades inquiry-based engineering design modules

Science.gov (United States)

Harlan, Jessica M.

This dissertation uses a format where I present and discuss three articles that were written in conjunction with my work on a research and evaluation team. The articles are based on a multi-year project researching and evaluating the design, development, and implementation of a middle grades integrated Science, Technology, Engineering, and Mathematics (STEM) program. Each of the articles demonstrates the complexity in researching and evaluating curricular development in multifaceted, rapidly changing environments. While the focus of each article differs, they all examine research and evaluation in the context of the design and development of middle grades engineering-design modules. The selected articles address challenges associated with assessing program objectives and evaluating program quality in complex education programs.The first article, presented in Chapter 2, provides an overview of the nature of the EYE program and examines the extent to which participation in the EYE program resulted in the achievement of program objectives. There is evidence that EYE Module participation has a positive impact on participating students as well as teachers. This study also revealed challenges associated with determining the impact of program participation simultaneously with program revisions and assessment development. The second article, presented in Chapter 3, examined the evaluation of fidelity of implementation of inquiry-oriented educational programs. This article was intended to examine one way of triangulating information to determine fidelity while considering variation in implementation consistent with program theories of learning. When applying this model to implementation of the EYE program, we found many teachers were implementing the modules with low to moderate fidelity, especially math teachers. The third article, presented in Chapter 4, examined the factor structure of an occupational values scale intended to measure student interest in STEM careers

An evaluation on the impact of national cancer wait targets on a (UK) radiotherapy department

International Nuclear Information System (INIS)

Roberts, Neill

2012-01-01

The radiotherapy department in this evaluation has been working towards full compliance with national cancer wait targets (CWT) since their implementation. 31 and 62 day targets set a maximum time frame for cancer patients to commence treatment. This evaluation explored the impact of these targets on staff and patients within the radiotherapy department and their overall impact on the radiotherapy service. Methods: This evaluation followed a mixed method approach of sequential triangulation. Qualitative data collection and analysis dominate findings but existing quantitative data, available within the department, was used to support the overall findings. Staff and patient interviews were used to establish attitudes to and experiences of the CWT initiative in relation to radiotherapy treatment. Quantitative data was taken from the local Cancer Centre CWT database that tracks patients referred for radiotherapy. Findings and Conclusion: Qualitative data analysis identified four main themes: pressure, appropriateness of target lengths, quality of treatment provided and efficiency of working practices within the department. Responses within these themes were both positive and negative with patients mainly the former and staff the latter. Quantitative evaluation found an increased monitoring and management burden from the CWT initiative, primarily for administrative, clerical and managerial staff. The main impact of the CWT initiative was an increase in pressure on staff due to reduced time to prepare and deliver treatment. Patients felt the initiative had not impacted negatively on their care and experienced a reduction in anxiety due to a reduction in waiting time.

Analytical Solution of Multicompartment Solute Kinetics for Hemodialysis

Directory of Open Access Journals (Sweden)

Przemysław Korohoda

2013-01-01

Full Text Available Objective. To provide an exact solution for variable-volume multicompartment kinetic models with linear volume change, and to apply this solution to a 4-compartment diffusion-adjusted regional blood flow model for both urea and creatinine kinetics in hemodialysis. Methods. A matrix-based approach applicable to linear models encompassing any number of compartments is presented. The procedure requires the inversion of a square matrix and the computation of its eigenvalues λ, assuming they are all distinct. This novel approach bypasses the evaluation of the definite integral to solve the inhomogeneous ordinary differential equation. Results. For urea two out of four eigenvalues describing the changes of concentrations in time are about 105 times larger than the other eigenvalues indicating that the 4-compartment model essentially reduces to the 2-compartment regional blood flow model. In case of creatinine, however, the distribution of eigenvalues is more balanced (a factor of 102 between the largest and the smallest eigenvalue indicating that all four compartments contribute to creatinine kinetics in hemodialysis. Interpretation. Apart from providing an exact analytic solution for practical applications such as the identification of relevant model and treatment parameters, the matrix-based approach reveals characteristic details on model symmetry and complexity for different solutes.

The impact of cancer drug wastage on economic evaluations.

Science.gov (United States)

Truong, Judy; Cheung, Matthew C; Mai, Helen; Letargo, Jessa; Chambers, Alexandra; Sabharwal, Mona; Trudeau, Maureen E; Chan, Kelvin K W

2017-09-15

The objective of this study was to determine the impact of modeling cancer drug wastage in economic evaluations because wastage can result from single-dose vials on account of body surface area- or weight-based dosing. Intravenous chemotherapy drugs were identified from the pan-Canadian Oncology Drug Review (pCODR) program as of January 2015. Economic evaluations performed by drug manufacturers and pCODR were reviewed. Cost-effectiveness analyses and budget impact analyses were conducted for no-wastage and maximum-wastage scenarios (ie, the entire unused portion of the vial was discarded at each infusion). Sensitivity analyses were performed for a range of body surface areas and weights. Twelve drugs used for 17 indications were analyzed. Wastage was reported (ie, assumptions were explicit) in 71% of the models and was incorporated into 53% by manufacturers; this resulted in a mean incremental cost-effectiveness ratio increase of 6.1% (range, 1.3%-14.6%). pCODR reported and incorporated wastage for 59% of the models, and this resulted in a mean incremental cost-effectiveness ratio increase of 15.0% (range, 2.6%-48.2%). In the maximum-wastage scenario, there was a mean increase in the incremental cost-effectiveness ratio of 24.0% (range, 0.0%-97.2%), a mean increase in the 3-year total incremental budget costs of 26.0% (range, 0.0%-83.1%), and an increase in the 3-year total incremental drug budget cost of approximately CaD $102 million nationally. Changing the mean body surface area or body weight caused 45% of the drugs to have a change in the vial size and/or quantity, and this resulted in increased drug costs. Cancer drug wastage can increase drug costs but is not uniformly modeled in economic evaluations. Cancer 2017;123:3583-90. © 2017 American Cancer Society. © 2017 American Cancer Society.

Mutagenesis and teratogenesis as end points in health impact assessment

International Nuclear Information System (INIS)

Bender, M.A.

1976-01-01

The genetic and teratogenic effects of agents released to the environment as a consequence of energy production are exceedingly difficult to evaluate. Nevertheless, these effects on human health may be very costly in the context of cost-benefit analysis. In fact, the procedures required to limit mutagenic or teratogenic agents to the levels considered acceptable by regulatory bodies may constitute a major fraction of the cost of energy, especially where prudence dictates that a lack of empirical data requires extremely conservative regulations. Experience with ionizing radiation and with regulation of nuclear power installations illustrates the difficulty of genetic and teratogenic health impact assessment and the great uncertainties involved, as well as the influence of these impacts on the regulatory process and the consequent increased cost of power from this source. Data on genetic and teratogenic impacts on human health from chemical agents released to the environment by other energy technologies are much less complete, and, because of the large number of potentially active agents involved, it is evident that generic solutions to health impact assessment will be required to evaluate these energy alternatives

Evaluation process of global environmental impact: assessment guidelines

International Nuclear Information System (INIS)

Memon, A.R.; Mahar, R.B.

2001-01-01

In developed and developing countries, the EIA (Environmental Impact Assessment) is becoming mandatory for the approval of Industrial projects and projects of Environmental hazards. The approving authority of each country has its own guidelines to get projects approved and make project proponents responsible to submit Environmental Impact Statement for the its detailed assessment. In this paper authors have studied an existing EIA Global guidelines and its evaluation process of altogether 40 countries from four continents, Asia, Pacific/Middle East, Europe, Australia and America/Canada. This evaluation process is recorded in the tabulation form and it has been formulated stage wise in which stage one highlights the inception of EIA guidelines of each country and stage two and three gives implementation process. The inception stage of guidelines gives an idea that when EIA was started and an implementation stages provide all information that when EIA become a part of legislation that provide an opportunity to the reader to understand the decision making process for project approvals. The main objective of writing EIA guidelines is to monitor the sustain ability of various types of the projects under different sectoral guidelines, therefore Projects related with different Sectors have been chosen and a detailed record in tabulation form gives an idea to understand the interaction of these guidelines. To make this paper more comprehensive, authors have gone thorough the sectoral guidelines of altogether 64 countries and studied 21 sector oriented project fields. These are of Agriculture/Irrigation, Biodiversity, Coastal/Marine, Community Participation, Extractive industries, Fisheries, Forestry, Hazard Risk, Health, Human settlement, Industry, Multi sectorial, Ports and Harbors, Power, refugees/resettlement, Social, Strategies/Planning, Tourism/Recreational, transportation, Waste Pollution and Wetlands/Water resources. (author)

Hospitality lighting solutions communication framework

NARCIS (Netherlands)

Blanch, Anna

2014-01-01

Hospitality customers are looking for systems that involve more than just turning the light on and off. They want lighting solutions that are energy-efficient, flexible and that will help enhance the guest experience. Based on on-going research about the impact that light can have in different

Evaluation of Iron and Manganese-Coated Pumice Application for the Removal of as(v from Aqueous Solutions

Directory of Open Access Journals (Sweden)

Leila Babaie Far

2012-12-01

Full Text Available Arsenic contamination of water has been recognized as a serious environmental issue and there are reports on its epidemiological problems to human health. The objective of this study was to evaluate the performances of iron-coated pumice and manganese-coated pumice as the adsorbents for removing arsenate from aqueous solutions. The effect of various parameters such as adsorbent dose, contact time, pH and initial concentration on removal efficiency of arsenate were evaluated in batch mode. The data obtained from the kinetic studies were analyzed using kinetic models of pseudo-first-order and pseudo-second-order. In addition, two isotherm models of Freundlich and Langmuir were used to fit the experimental data. The results showed that the optimum dosage of iron-coated pumice and manganese-coated pumice for arsenate removal were 40 and 80 g/L whereas the adsorption process reached equilibrium after 80 and 100 min, respectively. The maximum removal efficiency of arsenate using the two adsorbents were both recorded in pH=3 as the removal efficiency gradually declinedfollowing every increase in pH values of the solution. Iron-coated pumice also showed to have high removal efficiency when the initial concentration of arsenate was high while the low concentration of arsenate was efficiently removed by manganese-coated pumice. Moreover, it was depicted that the adsorption kinetics by bothadsorbents followed pseudo-second order equation and the uptake data of arsenate were well fitted with Langmuir isotherm model. Therefore, it could be concluded that iron and manganese-coated pumice could beconsidered as suitable adsorbents for arsenate removal from aqueous solutions.

Effects of different combinations of Hoagland's solution and Azolla ...

African Journals Online (AJOL)

ALAN

2013-04-17

Apr 17, 2013 ... hydroponic cultures containing different compositions of hydroponic solutions were evaluated in ... (Hoagland's solution minus N solution excluding Azolla; ..... nutrient deficiencies on photosynthesis and respiration in spinach.

Advanced combustion, emission control, health impacts, and fuels merit review and peer evaluation

Energy Technology Data Exchange (ETDEWEB)

None, None

2006-10-01

This report is a summary and analysis of comments from the Advisory Panel at the FY 2006 DOE National Laboratory Advanced Combustion, Emission Control, Health Impacts, and Fuels Merit Review and Peer Evaluation, held May 15-18, 2006 at Argonne National Laboratory. The work evaluated in this document supports the FreedomCAR and Vehicle Technologies Program. The results of this merit review and peer evaluation are major inputs used by DOE in making its funding decisions for the upcoming fiscal year.

A Novel Ice Storm Experiment for Evaluating the Ecological Impacts of These Extreme Weather Events

Science.gov (United States)

Driscoll, C. T.; Campbell, J. L.; Rustad, L.; Fahey, T.; Fahey, R. T.; Garlick, S.; Groffman, P.; Hawley, G. J.; Schaberg, P. G.

2017-12-01

Ice storms are among the most destructive natural disturbances in some regions of the world, and are an example of an extreme weather event that can profoundly disrupt ecosystem function. Despite potential dire consequences of ice storms on ecosystems and society, we are poorly positioned to predict responses because severe ice storms are infrequent and understudied. Since it is difficult to determine when and where ice storms will occur, most previous research has consisted of ad hoc attempts to characterize impacts in the wake of major icing events. To evaluate ice storm effects in a more controlled manner, we conducted a novel ice storm manipulation experiment at the Hubbard Brook Experimental Forest in New Hampshire. Water was sprayed above the forest canopy in sub-freezing conditions to simulate a glaze ice event. Treatments included replicate plots that received three levels of radial ice thickness (6, 13, and 19 mm) and reference plots that were not sprayed. Additionally, two of the mid-level treatment plots received ice applications in back-to-back years to evaluate effects associated with ice storm frequency. Measures of the forest canopy, including hemispherical photography, photosynthetically active radiation, and ground-based LiDAR, indicated that the ice loads clearly damaged vegetation and opened up the canopy, allowing more light to penetrate. These changes in the canopy were reflected in measurements of fine and coarse woody debris that were commensurate with the level of icing. Soil respiration declined in the most heavily damaged plots, which we attribute to changes in root activity. Although soil solution nitrogen showed clear seasonal patterns, there was no treatment response. These results differ from the severe regional natural ice storm of 1998, which caused large leaching losses of nitrate in soil solutions and stream water during the growing season after the event, due to lack of uptake by damaged vegetation. It is not yet clear why there

Effect of Solvent Additives on the Solution Aggregation of Phenyl-C61-Butyl Acid Methyl Ester (PCBM)

KAUST Repository

Tummala, Naga Rajesh

2015-11-24

High-boiling-point solvent additives, employed during the solution processing of active-layer formulations, impact the efficiency of bulk hetero-junction (BHJ) organic solar cells by influencing the morphological / topological features of the multicomponent thin film. Here, we aim at a better understanding of how these additives change the aggregation landscape in the casting solution prior to film deposition via a multi-scale computational study of the aggregation phenomena of phenyl-C61-butyric-acid methyl ester (PCBM) in various solutions. The energetic landscape of PCBM-solvent / solvent-additive intermolecular interactions is evaluated at the electronic-structure level through symmetry-adapted perturbation theory to determine the nature and strength of non-covalent forces important to aggregation. Molecular dynamics simulations highlight how the choice of solvent and solvent additives control the formation of molecular aggregates. Our results indicate that high-boiling-point solvent additives change the effective interactions among the PCBM and casting-solvent molecules and alter the equilibrium PCBM aggregate sizes in solution.

Some problems of evaluating environmental impacts of nuclear power installation building and operation

International Nuclear Information System (INIS)

Uvirova, E.

1984-01-01

The impacts of the construction and operation of a nuclear power installation on the natural environment is discussed, namely on changes in the landscape profile, in the structure of settlement and large-scale agricultural production, the requisition of agricultural land, changes in transport systems, etc., as well as approaches to the evaluation of these environmental impacts with the aim of preserving the optimal state of inter-relations between man and the natural environment. (author)

Evaluation of ocular prosthesis biofilm and anophthalmic cavity contamination after use of three cleansing solutions

Directory of Open Access Journals (Sweden)

Regina Márcia Zuccolotto Felippe Paranhos

2007-02-01

Full Text Available In addition to an initial socket discomfort, ocular prosthesis (OP installation may allow the adherence of fungi and/or bacteria due to the superficial characteristics of the prosthesis' material, use of inadequate cleansing solutions and methods, or because the void located between the internal portion of the prosthesis and the anophthalmic cavity (AC mucosa. Objective: The aim of this study was to evaluate OP biofilm formation and the level of contamination of the internal portion of the OP and the AC in 24 patients. Material and Methods: Material was collected from the AC at the beginning of the study and 15 days after cleansing of the OP with 3 cleansing solutions: a neutral liquid soap, a multiuse solution for contact lens (Complete and 0.12% chlorhexidine (Periogard. The collected materials were sowed in Petri dishes containing selective media for aerobic and facultative microorganisms, specifically staphylococci (Hipersalt agar with egg yolk, aerobic microorganisms (Brain Heart Infusion Blood Agar, streptococci (Mitis salivarius Agar, gram-negative bacilli (MacConkey Agar and yeasts (Chromagar CandidaTM, incubated at 35ºC or 37ºC and the number of colony forming units were counted. Data were analyzed statistically by ANOVA, Friedman's test and Spearman's correlation. Results: Aerobic microorganisms, gram-negative bacilli and S. aureus were found in the OP biofilm and in the AC. There was statistically significant difference (p<0.05 between the number of microorganisms before and after the use of the cleansing solutions. Conclusion: There was positive correlation with respect to the microorganisms present in the OP biofilm and AC for the 4 proposed treatments, indicating that the decrease of OP contamination leads to AC contamination as well.

Evaluation of environmental impacts during chemical mechanical polishing (CMP) for sustainable manufacturing

Energy Technology Data Exchange (ETDEWEB)

Lee, Hyun Seop; Park, Sun Joon; Jeong, Hae Do [Pusan National University, Busan (Korea, Republic of)

2013-02-15

Reducing energy consumption has become a critical issue in manufacturing. The semiconductor industry in particular is confronted with environmental regulations on pollution associated with electric energy, chemical, and ultrapure water (UPW) consumptions. This paper presents the results of an evaluation of the environmental impacts during chemical mechanical polishing (CMP), a key process for planarization of dielectrics and metal films in ultra-large-scale integrated circuits. The steps in the CMP process are idling, conditioning, wetting, wafer loading/unloading, head dropping, polishing, and rinsing. The electric energy, CMP slurry, and UPW consumptions associated with the process and their impacts on global warming are evaluated from an environmental standpoint. The estimates of electric energy, slurry, and UPW consumptions as well as the associated greenhouse gas emissions presented in this paper will provide a technical aid for reducing the environmental burden associated with electricity consumption during the CMP process.

The Impact of a Developed Measurement and Evaluation Development Program on Pre-Service Physical Education Teachers' Perceptions Related to Measurement and Evaluation

Science.gov (United States)

Arslan, Yunus; Erturan Ilker, Gokce; Demirhan, Giyasettin

2013-01-01

The purpose of this study was to investigate the impact of the Measurement and Evaluation Development Program on pre-service physical education teachers' general perceptions and competency perceptions related to alternative assessment in physical education, and their competency perceptions related to educational measurement and evaluation. The…

Solidification method for organic solution and processing method of aqueous solution

International Nuclear Information System (INIS)

Kamoshida, Mamoru; Fukazawa, Tetsuo; Yazawa, Noriko; Hasegawa, Toshihiko

1998-01-01

The relative dielectric constant of an organic solution containing polar ingredients is controlled to 13 or less to enable its solidification. The polarity of the organic solution can be evaluated quantitatively by using the relative dielectric constant. If the relative dielectric constant is high, it can be controlled by dilution using a non-polar organic solvent of low relative dielectric constant. With such procedures, solidification can be conducted by using an economical 12-hydroxy stearic acid, process of liquid wastes can be facilitated and the safety can be ensured. (T.M.)

The Impact of the Immediate Feedback Assessment Technique on Course Evaluations

Directory of Open Access Journals (Sweden)

Trent W. Maurer

2015-09-01

Full Text Available This project reports the results of two studies that investigated the impact on course evaluations of using partial credit iterative responding (PCIR with the Immediate Feedback Assessment Technique (IF-AT forms on summative course assessments. This project also quantifies grade inflation from utilizing different PCIR schemes and documents the percentage of possible partial credit students learned. Study 1 compared evaluations in courses where exams were manipulated. Study 2 compared evaluations in courses where daily reading quizzes were manipulated. Results from Study 1 revealed that multiple course evaluation scores increased 10% in the PCIR condition. Students earned 75% of the partial credit available through PCIR, which resulted in a 10% increase in their exam scores. Results from Study 2 revealed no difference in course evaluations between conditions. Students earned roughly 40% of the partial credit available through PCIR, resulting in a 4 to 8% increase in their quiz scores, depending on the PCIR scheme.

A practical evaluation of detergent and disinfectant solutions on ...

African Journals Online (AJOL)

Student01

2012-01-06

Jan 6, 2012 ... Nine sanitation chemical solutions: benzalkonium chloride, sodium hypochlorite, nitric ... cleaning and disinfection in reducing selected bacteria levels as required by ..... bacteria targeted during disinfection are attached to a.

77 FR 6585 - Proposed Information Collection Request (ICR) for the Impact Evaluation of the YouthBuild Program...

Science.gov (United States)

2012-02-08

... job characteristics? What are YouthBuild's impacts on crime and delinquency? What are the program's... (ICR) for the Impact Evaluation of the YouthBuild Program; New Collection AGENCY: Employment and... instruments are clearly understood, and the impact of collection requirements on respondents can be properly...

Evaluating the Hydrologic Performance of Low Impact Development Scenarios in a Micro Urban Catchment

Science.gov (United States)

Li, Chunlin; Liu, Miao; Hu, Yuanman; Han, Rongqing; Shi, Tuo; Qu, Xiuqi; Wu, Yilin

2018-01-01

As urbanization progresses, increasingly impervious surfaces have changed the hydrological processes in cities and resulted in a major challenge for urban stormwater control. This study uses the urban stormwater model to evaluate the performance and costs of low impact development (LID) scenarios in a micro urban catchment. Rainfall-runoff data of three rainfall events were used for model calibration and validation. The pre-developed (PreDev) scenario, post-developed (PostDev) scenario, and three LID scenarios were used to evaluate the hydrologic performance of LID measures. Using reduction in annual runoff as the goal, the best solutions for each LID scenario were selected using cost-effectiveness curves. The simulation results indicated that the three designed LID scenarios could effectively reduce annual runoff volumes and pollutant loads compared with the PostDev scenario. The most effective scenario (MaxPerf) reduced annual runoff by 53.4%, followed by the sponge city (SpoPerf, 51.5%) and economy scenarios (EcoPerf, 43.1%). The runoff control efficiency of the MaxPerf and SpoPerf scenarios increased by 23.9% and 19.5%, respectively, when compared with the EcoPerf scenario; however, the costs increased by 104% and 83.6%. The reduction rates of four pollutants (TSS, TN, TP, and COD) under the MaxPerf scenario were 59.8–61.1%, followed by SpoPerf (53.9–58.3%) and EcoPerf (42.3–45.4%), and the costs of the three scenarios were 3.74, 3.47 and 1.83 million yuan, respectively. These results can provide guidance to urban stormwater managers in future urban planning to improve urban water security. PMID:29401747

Influence of the soil/solution ratio, interaction time, and extractant on the evaluation of iron chelate sorption/desorption by soils.

Science.gov (United States)

Hernández-Apaolaza, Lourdes; Lucena, Juan J

2011-03-23

Synthetic Fe chelates are the most efficient agricultural practice to control Fe deficiency in crops, EDTA/Fe3+ and o,o-EDDHA/Fe3+ being the most commonly used. Their efficacy as Fe sources and carriers in soils can be severely limited by their retention on it. The aim of this work is to evaluate the possible bias introduced in the studies of the iron chelate retention by soils. For that purpose, results obtained for EDTA and EDDHA iron chelates from two batch studies with different soil/solution ratios were compared with data obtained for a leaching column experiment. Moreover, different extractants were tested to study the o,o-EDDHA/Fe3+ and o,p-EDDHA/Fe3+ desorption from a calcareous soil, and also the effect of the interaction time in their retention process has been evaluated. In summary, the mobility through a calcareous soil of the studied iron chelates differs greatly depending on the type of iron chelate and also on the procedure used to evaluate the retention and the soil/solution ratio used. In general, the leaching column method is preferred because the achieved conclusions are more representative of the natural conditions, but batch methods are very useful as a preliminary experiment, especially one with a high soil/solution ratio. The iron chelate desorption could be quantified by using a sequential extraction with water, sodium sulfate, and DTPA as extractants. Under the experimental conditions used in this study, o,o-EDDHA/Fe3+ retention increased with interaction time.

Impact evaluation of conducted UWB transients on loads in power-line networks

Directory of Open Access Journals (Sweden)

B. Li

2017-09-01

Full Text Available Nowadays, faced with the ever-increasing dependence on diverse electronic devices and systems, the proliferation of potential electromagnetic interference (EMI becomes a critical threat for reliable operation. A typical issue is the electronics working reliably in power-line networks when exposed to electromagnetic environment. In this paper, we consider a conducted ultra-wideband (UWB disturbance, as an example of intentional electromagnetic interference (IEMI source, and perform the impact evaluation at the loads in a network. With the aid of fast Fourier transform (FFT, the UWB transient is characterized in the frequency domain. Based on a modified Baum–Liu–Tesche (BLT method, the EMI received at the loads, with complex impedance, is computed. Through inverse FFT (IFFT, we obtain time-domain responses of the loads. To evaluate the impact on loads, we employ five common, but important quantifiers, i.e., time-domain peak, total signal energy, peak signal power, peak time rate of change and peak time integral of the pulse. Moreover, to perform a comprehensive analysis, we also investigate the effects of the attributes (capacitive, resistive, or inductive of other loads connected to the network, the rise time and pulse width of the UWB transient, and the lengths of power lines. It is seen that, for the loads distributed in a network, the impact evaluation of IEMI should be based on the characteristics of the IEMI source, and the network features, such as load impedances, layout, and characteristics of cables.

Evaluating the impact of a Biology I professional development series

Science.gov (United States)

Sampsell, Jacquelyn Scipper

2005-11-01

Effective professional development offers opportunities for teachers to reflect on their practices, modify and implement changes in the classroom, and eventually impact students' learning. However, professional development must be evaluated to determine whether the desired results are actually occurring in the classroom. The Program for Research and Evaluation for Public Schools, Inc. (PREPS) created a Biology I Workshop series to assist school districts in Mississippi in aligning curriculum, instruction, and assessment that will ultimately improve student achievement in the classroom and performance on the current high-stakes test. This study evaluated the PREPS Biology I Subject Area workshops by using Thomas Guskey's evaluation model as a guide for the process. This study used a mixed-method design and collected data from three primary sources: the PREPS Final Evaluation Form completed at the conclusion of workshops, a questionnaire created by the researcher, and interviews with six-case study teacher participants selected from the results of the questionnaire. According to the ratings and comments written on the two instruments and supporting evidence from the case-study teachers, the participants of the Biology I workshop found the workshops to be effective for all five levels of Guskey's evaluation model. The content was rated effective because the workshop materials were aligned to the curriculum frameworks and were focused on using student learning to improve student achievement. Working through the activities rather than simply being told about them and having a successful classroom biology teacher as a presenter were the factors that contributed to the increase in the participants' knowledge and skills. Organizational results indicate that the workshop was effective in that the goals of the workshop series aligned with the schools' mission and goals for student learning. Several issues, such as financial support, time for collaboration with peers, and

Evaluation of the efficacy of emodepside+praziquantel topical solution against cestode (Dipylidium caninum, Taenia taeniaeformis, and Echinococcus multilocularis) infections in cats.

Science.gov (United States)

Charles, S D; Altreuther, G; Reinemeyer, C R; Buch, J; Settje, T; Cruthers, L; Kok, D J; Bowman, D D; Kazacos, K R; Jenkins, D J; Schein, E

2005-10-01

Emodepside+praziquantel topical solution was developed to provide broad-spectrum anthelmintic activity against gastrointestinal parasites in cats. Eight controlled studies were conducted to evaluate the efficacy of a topical solution of emodepside (3 mg/kg) and praziquantel (12 mg/kg) (Profender, BayerAG, Leverkusen, Germany) against feline infections with three species of cestodes. Studies featured naturally acquired infections of Dipylidium caninum or Taenia taeniaeformis, or experimental infections with Echinococcus multilocularis that were placebo-controlled, randomized and blinded. Cats were euthanatized and necropsied between 2 and 11 days after treatment, depending on the target parasite. The efficacy of emodepside+praziquantel topical solution was 100% against D. caninum and T. taeniaeformis, and 98.5- 100% against E. multilocularis. No significant systemic or local adverse reactions to treatment were noted in cats that received the combination. Topical treatment of cats with emodepside+praziquantel topical solution was safe and highly effective against cestode infections.

Methodology for assessing the impacts of distributed generation interconnection

Directory of Open Access Journals (Sweden)

Luis E. Luna

2011-06-01

Full Text Available This paper proposes a methodology for identifying and assessing the impact of distributed generation interconnection on distribution systems using Monte Carlo techniques. This methodology consists of two analysis schemes: a technical analysis, which evaluates the reliability conditions of the distribution system; on the other hand, an economic analysis that evaluates the financial impacts on the electric utility and its customers, according to the system reliability level. The proposed methodology was applied to an IEEE test distribution system, considering different operation schemes for the distributed generation interconnection. The application of each one of these schemes provided significant improvements regarding the reliability and important economic benefits for the electric utility. However, such schemes resulted in negative profitability levels for certain customers, therefore, regulatory measures and bilateral contracts were proposed which would provide a solution for this kind of problem.

Exponential estimates for solutions of half-linear differential equations

Czech Academy of Sciences Publication Activity Database

Řehák, Pavel

2015-01-01

Roč. 147, č. 1 (2015), s. 158-171 ISSN 0236-5294 Institutional support: RVO:67985840 Keywords : half-linear differential equation * decreasing solution * increasing solution * asymptotic behavior Subject RIV: BA - General Mathematics Impact factor: 0.469, year: 2015 http://link.springer.com/article/10.1007%2Fs10474-015-0522-9

On periodic solutions to second-order Duffing type equations

Czech Academy of Sciences Publication Activity Database

Lomtatidze, Alexander; Šremr, Jiří

2018-01-01

Roč. 40, April (2018), s. 215-242 ISSN 1468-1218 Institutional support: RVO:67985840 Keywords : periodic solution * Duffing type equation * positive solution Subject RIV: BA - General Mathematics OBOR OECD: Applied mathematics Impact factor: 1.659, year: 2016 http://www. science direct.com/ science /article/pii/S1468121817301335?via%3Dihub

An evaluation of different soil washing solutions for remediating arsenic-contaminated soils.

Science.gov (United States)

Wang, Yiwen; Ma, Fujun; Zhang, Qian; Peng, Changsheng; Wu, Bin; Li, Fasheng; Gu, Qingbao

2017-04-01

Soil washing is a promising way to remediate arsenic-contaminated soils. Most research has mostly focused on seeking efficient extractants for removing arsenic, but not concerned with any changes in soil properties when using this technique. In this study, the removal of arsenic from a heavily contaminated soil employing different washing solutions including H 3 PO 4 , NaOH and dithionite in EDTA was conducted. Subsequently, the changes in soil physicochemical properties and phytotoxicity of each washing technique were evaluated. After washing with 2 M H 3 PO 4 , 2 M NaOH or 0.1 M dithionite in 0.1 M EDTA, the soil samples' arsenic content met the clean-up levels stipulated in China's environmental regulations. H 3 PO 4 washing decreased soil pH, Ca, Mg, Al, Fe, and Mn concentrations but increased TN and TP contents. NaOH washing increased soil pH but decreased soil TOC, TN and TP contents. Dithionite in EDTA washing reduced soil TOC, Ca, Mg, Al, Fe, Mn and TP contents. A drastic color change was observed when the soil sample was washed with H 3 PO 4 or 0.1 M dithionite in 0.1 M EDTA. After adjusting the soil pH to neutral, wheat planted in the soil sample washed by NaOH evidenced the best growth of all three treated soil samples. These results will help with selecting the best washing solution when remediating arsenic-contaminated soils in future engineering applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Role of Green Infrastructure Solutions in Urban Flood Risk Management

OpenAIRE

Soz, Salman Anees; Kryspin-Watson, Jolanta; Stanton-Geddes, Zuzana

2016-01-01

This Knowledge Note explores the role of green infrastructure solutions in urban flood risk management. Green infrastructure solutions represent an approach that focuses on using natural processes for managing wet weather impacts while delivering environmental, social, and economic benefits. Green infrastructure solutions, such as wetlands, bioshields, buffer zones, green roofing, street s...

Scorpion toxins prefer salt solutions

Czech Academy of Sciences Publication Activity Database

Nikouee, A.; Khabiri, Morteza; Cwiklik, Lukasz

2015-01-01

Roč. 21, č. 11 (2015), 287/1-287/14 ISSN 1610-2940 R&D Projects: GA ČR GA13-06181S Institutional support: RVO:61388963 ; RVO:61388955 Keywords : ionic solutions * molecular dynamics * nonaqueous media * secondary structure Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.438, year: 2015

Evaluation of Graphite Fiber/Polyimide PMCs from Hot Melt vs Solution Prepreg

Science.gov (United States)

Shin, E. Eugene; Sutter, James K.; Eakin, Howard; Inghram, Linda; McCorkle, Linda; Scheiman, Dan; Papadopoulos, Demetrios; Thesken, John; Fink, Jeffrey E.

2002-01-01

Carbon fiber reinforced high temperature polymer matrix composites (PMC) have been extensively investigated as potential weight reduction replacements of various metallic components in next generation high performance propulsion rocket engines. The initial phase involves development of comprehensive composite material-process-structure-design-property-in-service performance correlations and database, especially for a high stiffness facesheet of various sandwich structures. Overview of the program plan, technical approaches and current multi-team efforts will be presented. During composite fabrication, it was found that the two large volume commercial prepregging methods (hot-melt vs. solution) resulted in considerably different composite cure behavior. Details of the process-induced physical and chemical modifications in the prepregs, their effects on composite processing, and systematic cure cycle optimization studies will be discussed. The combined effects of prepregging method and cure cycle modification on composite properties and isothermal aging performance were also evaluated.

Evaluation of Graphite Fiber/Polyimide PMCs from Hot Melt versus Solution Prepreg

Science.gov (United States)

Shin, Eugene E.; Sutter, James K.; Eakin, Howard; Inghram, Linda; McCorkle, Linda; Scheiman, Dan; Papadopoulos, Demetrios; Thesken, John; Fink, Jeffrey E.; Gray, Hugh R. (Technical Monitor)

2002-01-01

Carbon fiber reinforced high temperature polymer matrix composites (PMC) have been extensively investigated as potential weight reduction replacements of various metallic components in next generation high performance propulsion rocket engines. The initial phase involves development of comprehensive composite material-process-structure-design-property in-service performance correlations and database, especially for a high stiffness facesheet of various sandwich structures. Overview of the program plan, technical approaches and current multi-team efforts will be presented. During composite fabrication, it was found that the two large volume commercial prepregging methods (hot-melt vs. solution) resulted in considerably different composite cure behavior. Details of the process-induced physical and chemical modifications in the prepregs, their effects on composite processing, and systematic cure cycle optimization studies will be discussed. The combined effects of prepregging method and cure cycle modification on composite properties and isothermal aging performance were also evaluated.

Impact Evaluation of Low Flow Showerheads for Hong Kong Residents

Directory of Open Access Journals (Sweden)

Ling-tim Wong

2016-07-01

Full Text Available The voluntary Water Efficiency Labelling Scheme (WELS on showers for bathing in Hong Kong is a water conservation initiative of the Hong Kong Special Administrative Region (HKSAR Government. As shower water consumption has been identified as a potential area for carbon emissions reductions, this study examines, from a five-month measurement survey of the showering practices of 37 local residents, a range of showerheads with resistance factors k = 0.54–4.05 kPa·min2·L−2 with showering attributes including hot shower temperature, temperature difference between hot and cold water supply, flow rate and water consumption and shower duration. A Monte Carlo model is proposed for evaluating the water consumption and carbon-reducing impacts of WELS on showers for bathing at confidence intervals with input parameters determined from the measurement survey. The simulation results indicate that full implementation of WELS rated showerheads with k ≥ 4.02 can reduce water consumption by 37%, energy use by 25% and carbon dioxide (CO2 emissions by 26%. This study is also a useful source of reference for policymakers and practitioners to evaluate the impacts of water efficient showerheads on water consumption, energy use, and CO2 emissions.

Scientist impact factor (SIF): a new metric for improving scientists' evaluation?

Science.gov (United States)

Lippi, Giuseppe; Mattiuzzi, Camilla

2017-08-01

The publication of scientific research is the mainstay for knowledge dissemination, but is also an essential criterion of scientists' evaluation for recruiting funds and career progression. Although the most widespread approach for evaluating scientists is currently based on the H-index, the total impact factor (IF) and the overall number of citations, these metrics are plagued by some well-known drawbacks. Therefore, with the aim to improve the process of scientists' evaluation, we developed a new and potentially useful indicator of recent scientific output. The new metric scientist impact factor (SIF) was calculated as all citations of articles published in the two years following the publication year of the articles, divided by the overall number of articles published in that year. The metrics was then tested by analyzing data of the 40 top scientists of the local University. No correlation was found between SIF and H-index (r=0.15; P=0.367) or 2 years H-index (r=-0.01; P=0.933), whereas the H-index and 2 years H-index values were found to be highly correlated (r=0.57; Particles published in one year and the total number of citations to these articles in the two following years (r=0.62; Pscientists, wherein the SIF reflects the scientific output over the past two years thus increasing their chances to apply to and obtain competitive funding.

The Impact of Evaluation Use on Accounting Programs’ Performance: An Exploratory Study

Directory of Open Access Journals (Sweden)

Sheizi Calheira de Freitas

2016-11-01

Full Text Available The Brazilian program of higher education evaluation, broadly known as the National Exam of Students’ Performance (ENADE, represents a governmental effort to gather information on undergraduate educational quality. As a product of that evaluation, reports are made available to each program evaluated. Our present research addresses the impact of ENADE evaluation report utilization on multiple higher education accounting programs’ performance in their subsequent evaluation. Based upon theoretical support from literature about evaluation use, a web-based survey was developed and provided across the country to the coordinators of accounting programs. From a response rate of 62% of the study target population and using multiple regressions, we found that there was a positive correlation between usage of the ENADE evaluation report and the performance of undergraduate accounting programs in their subsequent evaluation. Based upon the reviewed literature and, in accordance with these research results, it is possible to infer that the use of evaluation reports derived from the higher education evaluation system promoted by the Brazilian government can influence the decisions of educational institutions and promote improvement.

The "wins" of change: evaluating the impact of predicted changes on case management practice.

Science.gov (United States)

Stanton, Marietta P; Barnett Lammon, Carol Ann

2008-01-01

A variety of strategies were employed to identify current and future trends that would impact the practice of case management. Historical review, consultation with case management experts, literature review, and environmental scanning by practicing case managers were strategies employed to determine the impact of current and future trends on case management. The trends identified in this article have implications for case managers in a variety of settings. Case managers participating in the environmental scanning process to evaluate the impact of the identified trends on their organization included representation from acute care, home care, behavioral health, workers' compensation, and private insurance settings. The top 7 trends identified by experts in the field of case management included pay for performance, recovery audit contractors, Medicare demonstration projects, transitions of care, informatics in healthcare and case management, metrics for case management, and the impact of an aging population in case management. Practicing case managers were asked to react to these trends in terms of likelihood of occurrence in their organization and impact of these trends on their case management practice. Case management will ultimately have a higher degree of accountability for its practice if metrics to evaluate and reimbursement for case management become a reality. A multitude of performance measures exist that will be monitored and be tied to reimbursement. To ensure that agencies are accomplishing these performance measures, case management will potentially have a growing importance. Case managers perceive that these trends have a predominantly positive impact on case management.

Evaluation of the impact of intervention programmes on education organisations: Application to a Quality Management System.

Science.gov (United States)

Fernández-Díaz, Mª Jose; Rodríguez-Mantilla, Jesús Miguel; Jover-Olmeda, Gonzalo

2017-08-01

This paper analyses the importance of evaluating the various components of the programmes or actions carried out by education organisations. It highlights the need to assess the impact of the intervention on the organisation and consider how changes are consolidated over time in interaction with the context. We propose an impact evaluation model and as an example have chosen the implementation of Quality Management Systems in schools. The paper analyses the results obtained in 40 schools in three regions (Spanish Autonomous Communities) with varying levels of implementation. The results show overall impact on these education centres as the teachers and management teams of the centres perceive it. This impact is more evident in some of the dimensions considered in the study than in others. The results also confirm the differences between regional contexts. Copyright © 2017 Elsevier Ltd. All rights reserved.

77 FR 28623 - Comment Request for Information Collection for the Impact Evaluation of the YouthBuild Program...

Science.gov (United States)

2012-05-15

..., earnings, and job characteristics? What are YouthBuild's impacts on crime and delinquency? What are the... Collection for the Impact Evaluation of the YouthBuild Program; New Collection AGENCY: Employment and... instruments are clearly understood, and the impact of collection requirements on respondents can be properly...

On the generation of magnetostatic solutions from gravitational two-soliton solutions of a stationary mass

Energy Technology Data Exchange (ETDEWEB)