Oxidative destruction of ammonia for restoration of uranium solution mining sites

Energy Technology Data Exchange (ETDEWEB)

Humenick, M.J.; Garwacka, K.

1984-01-01

A laboratory experimental research project was conducted to evaluate the use of chlorine for the oxidative destruction of residual ammonia that may remain in ground water after in-situ uranium solution mining operations. The work tested the idea of injecting high strength calcium hypochlorite solution into the mining zone to convert ammonia to nitrogen gas as a final cleanup process for ammonia removal from the ground water system. This paper details ammonia removal efficiency as a function of chlorine dose, reactant, and product material balances, and how the concept may be used as a final ground water restoration process.

Restoration of uranium solution mining deposits

International Nuclear Information System (INIS)

DeVries, F.W.; Lawes, B.C.

1981-01-01

Ammonium carbonates are commonly used as the lixiviant for in-situ leaching of uranium ores. However this leads to the deposition of ammonium ions in the uranium ore formation and the problem of ammonia contamination of ground water which may find its way into the drinking water supply. The ammonia contamination of the ore deposit may be reduced by injecting an aqueous solution of a potassium salt (carbonate, bicarbonate, halide, sulfate, bisulfate, persulfate, or monopersulfate) into the deposit after mining has ceased

Uranium solution mining cost estimating technique: means for rapid comparative analysis of deposits

International Nuclear Information System (INIS)

Anon.

1978-01-01

Twelve graphs provide a technique for determining relative cost ranges for uranium solution mining projects. The use of the technique can provide a consistent framework for rapid comparative analysis of various properties of mining situations. The technique is also useful to determine the sensitivities of cost figures to incremental changes in mining factors or deposit characteristics

Data mining with SPSS modeler theory, exercises and solutions

CERN Document Server

Wendler, Tilo

2016-01-01

Introducing the IBM SPSS Modeler, this book guides readers through data mining processes and presents relevant statistical methods. There is a special focus on step-by-step tutorials and well-documented examples that help demystify complex mathematical algorithms and computer programs. The variety of exercises and solutions as well as an accompanying website with data sets and SPSS Modeler streams are particularly valuable. While intended for students, the simplicity of the Modeler makes the book useful for anyone wishing to learn about basic and more advanced data mining, and put this knowledge into practice.

Preliminary evaluation of solution-mining intrusion into a salt-dome repository

International Nuclear Information System (INIS)

1981-06-01

This report is the product of the work of an ONWI task force to evaluate inadvertant human intrusion into a salt dome repository by solution mining. It summarizes the work in the following areas: a general review of the levels of defense that could reduce both the likelihood and potential consequences of human intrusion into a salt dome repository; evaluation of a hypothetical intrusion scenario and its consequences; recommendation for further studies. The conclusions of this task force report can be summarized as follows: (1) it is not possible at present to establish with certainty that solution mining is credible as a human-intrusion event. The likelihood of such an intrusion will depend on the effectiveness of the preventive measures; (2) an example analysis based on the realistic approach is presented in this report; it concluded that the radiological consequences are strongly dependent upon the mode of radionuclide release from the waste form, time after emplacement, package design, impurities in the host salt, the amount of a repository intercepted, the solution mining cavity form, the length of time over which solution mining occurs, the proportion of contaminated salt source for human consumption compared to other sources, and the method of salt purification for culinary purposes; (3) worst case scenarios done by other studies suggest considerable potential for exposures to man while preliminary evaluations of more realistic cases suggest significantly reduced potential consequences. Mathematical model applications to process systems, guided by more advanced assumptions about human intrusion into geomedia, will shed more light on the potential for concerns and the degree to which mitigative measures will be required

77 FR 5566 - Notice of Availability of the Final EIS for the HB In-Situ Solution Mine Project, Eddy County...

Science.gov (United States)

2012-02-03

...] Notice of Availability of the Final EIS for the HB In-Situ Solution Mine Project, Eddy County, New Mexico... Statement (Final EIS) for the HB In-Situ Solution Mine Project, and by this notice is announcing its... the Federal Register. ADDRESSES: Copies of the HB In-Situ Solution Mining EIS are available for public...

Process for the reduction of competitive oxidant consuming reactions in the solution mining of a mineral

International Nuclear Information System (INIS)

Stover, D.E.

1980-01-01

The present invention relates to an improved method for the solution mining of a mineral from a subterranean formation. More specifically, the invention relates to an improved method which enhances significantly the recovery of the mineral from a subterranean formation via solution mining by reducing the oxidant consuming reactions which compete with the mineral for the oxidant injected therein

76 FR 21401 - Notice of Availability of the Draft EIS for the HB In-Situ Solution Mine Project, Eddy County, NM

Science.gov (United States)

2011-04-15

...] Notice of Availability of the Draft EIS for the HB In-Situ Solution Mine Project, Eddy County, NM AGENCY... prepared a Draft Environmental Impact Statement (EIS) for the HB In- Situ Solution Mine Project, and by... considered, the BLM must receive written comments on the HB In-Situ Solution Mine Project Draft EIS within 60...

Mining the multigroup-discrete ordinates algorithm for high quality solutions

International Nuclear Information System (INIS)

Ganapol, B.D.; Kornreich, D.E.

2005-01-01

A novel approach to the numerical solution of the neutron transport equation via the discrete ordinates (SN) method is presented. The new technique is referred to as 'mining' low order (SN) numerical solutions to obtain high order accuracy. The new numerical method, called the Multigroup Converged SN (MGCSN) algorithm, is a combination of several sequence accelerators: Romberg and Wynn-epsilon. The extreme accuracy obtained by the method is demonstrated through self consistency and comparison to the independent semi-analytical benchmark BLUE. (authors)

Recovery of uranium from uranium mine waters and copper ore leaching solutions

Energy Technology Data Exchange (ETDEWEB)

George, D R; Ross, J R [Salt Lake City Metallurgy Research Center, Salt Lake City, UT (United States)

1967-06-15

Waters pumped from uranium mines in New Mexico are processed by ion exchange to recover uranium. Production is approximately 200 lb U{sub 3}O{sub 8}/d from waters containing 5 to 15 ppm U{sub 3}O{sub 8}. Recoveries range from 80 to 90%. Processing plants are described. Uranium has been found in the solutions resulting from the leaching of copper-bearing waste rock at most of the major copper mines in western United States. These solutions, which are processed on a very large scale for recovery of copper, contain 2 to 12 ppm U{sub 3}O{sub 8}. Currently, uranium is not being recovered, but a potential production of up to 6000 lb U{sub 3}O{sub 8}/d is indicated. Ion exchange and solvent extraction research studies are described. (author)

Is Toscana A Formal Concept Analysis Based Solution In Web Usage Mining?

Directory of Open Access Journals (Sweden)

Dan-Andrei SITAR-TĂUT

2012-01-01

Full Text Available Analyzing large amount of data come from web logs represents a complex, but challenging nowadays problem with implication in various fields, thing that lets open a way for theoretically infinite approaches an implementations. The main goal of our paper represents the possibility of applying the formal concept analysis as viable solution of sustaining the web mining process, based on a technological open-source solution called TOSCANA.

Preoperational assessment of solute release from waste rock at proposed mining operations

International Nuclear Information System (INIS)

Lapakko, Kim A.

2015-01-01

Highlights: • Modeling to estimate solute release from waste rock at proposed mines is described. • Components of the modeling process are identified and described. • Modeling inputs required are identified and described. • Examples of data generated and their application are presented. • Challenges inherent to environmental review are identified. - Abstract: Environmental assessments are conducted prior to mineral development at proposed mining operations. Among the objectives of these assessments is prediction of solute release from mine wastes projected to be generated by the proposed mining and associated operations. This paper provides guidance to those engaged in these assessments and, in more detail, provides insights on solid-phase characterization and application of kinetic test results for predicting solute release from waste rock. The logic guiding the process is consistent with general model construction practices and recent publications. Baseline conditions at the proposed site are determined and a detailed operational plan is developed and imposed upon the site. Block modeling of the mine geology is conducted to identify the mineral assemblages present, their masses and compositional variations. This information is used to select samples, representative of waste rock to be generated, that will be analyzed and tested to describe characteristics influencing waste rock drainage quality. The characterization results are used to select samples for laboratory dissolution testing (kinetic tests). These tests provide empirical data on dissolution of the various mineral assemblages present as waste rock. The data generated are used, in conjunction with environmental conditions, the proposed method of mine waste storage, and scientific and technical principles, to estimate solute release rates for the operational scale waste rock. Common concerns regarding waste rock are generation of acidic drainage and release of heavy metals and sulfate. Key solid

Method of solution mining subsurface orebodies to reduce restoration activities

Energy Technology Data Exchange (ETDEWEB)

Hartman, G.J.

1984-01-24

A method of solution mining is claimed wherein a lixiviant containing both leaching and oxidizing agents is injected into the subsurface orebody. The composition of the lixiviant is changed by reducing the level of oxidizing agent to zero so that soluble species continue to be removed from the subsurface environment. This reduces the uranium level of the ground water aquifer after termination of the lixiviant injection.

Collaborative Data Mining

Science.gov (United States)

Moyle, Steve

Collaborative Data Mining is a setting where the Data Mining effort is distributed to multiple collaborating agents - human or software. The objective of the collaborative Data Mining effort is to produce solutions to the tackled Data Mining problem which are considered better by some metric, with respect to those solutions that would have been achieved by individual, non-collaborating agents. The solutions require evaluation, comparison, and approaches for combination. Collaboration requires communication, and implies some form of community. The human form of collaboration is a social task. Organizing communities in an effective manner is non-trivial and often requires well defined roles and processes. Data Mining, too, benefits from a standard process. This chapter explores the standard Data Mining process CRISP-DM utilized in a collaborative setting.

Final environmental statement related to the Wyoming Mineral Corporation Irigaray uranium solution mining project (Johnson County, Wyoming)

International Nuclear Information System (INIS)

1978-09-01

The Irigaray project consists of solution mining (in situ leaching) operations involving uranium ore deposits in Johnson County, Wyoming. Solution mining activities will include a processing facility with an annual production of 500,000 lb of U 3 O 8 from up to 50 acres of well fields through the initial license authorization. The Irigaray project has an estimated lifetime of up to 10 to 20 years with known ore deposits and the current level of solution mining technology. The site is mostly used as grazing land for cattle and sheep. Initiation of the Irigaray project would result in the temporary removal from grazing and the disturbance of approximately 60 acres during operation as proposed by the staff. All disturbed surface areas will be reclaimed and returned to their original use. Approximately 1.2 x 10 6 m 3 of water will be withdrawn from the ore zone aquifer. 43 figs, 52 tables

International mining forum 2004, new technologies in underground mining, safety in mines proceedings

Energy Technology Data Exchange (ETDEWEB)

Jerzy Kicki; Eugeniusz Sobczyk (eds.)

2004-01-15

The book comprises technical papers that were presented at the International Mining Forum 2004. This event aims to bring together scientists and engineers in mining, rock mechanics, and computer engineering, with a view to explore and discuss international developments in the field. Topics discussed in this book are: trends in the mining industry; new solutions and tendencies in underground mines; rock engineering problems in underground mines; utilization and exploitation of methane; prevention measures for the control of rock bursts in Polish mines; and current problems in Ukrainian coal mines.

Mercury and Cyanide Contaminations in Gold Mine Environment and Possible Solution of Cleaning Up by Using Phytoextraction

Directory of Open Access Journals (Sweden)

NURIL HIDAYATI

2009-09-01

Full Text Available Water contamination with heavy metals, mainly mercury and cyanide (CN due to small scale of public mines and large scale of industrial mines have been in concern to residents around the area. Surveys of heavy metal contamination in aquatic environments, such as rivers and paddy fields over two gold mine areas in West Jawa were conducted and possible solution of using indigenous plants for phytoremediation was studied. The results showed that most of the rivers and other aquatic environments were affected by gold mine activities. Rivers, ponds, and paddy fields around illegal public mines were mostly contaminated by mercury in considerably high levels, such as paddy fields in two locations (Nunggul and Leuwijamang, Pongkor were contaminated up to 22.68 and 7.73 ppm of Hg, respectively. Whereas rivers located around large scale industrial mines were contaminated by CN. Possible solution of cleaning up by using green technology of phytoremediation was examined. Some plant species grew in the contaminated sites showed high tolerance and potentially effective in accumulating cyanide or mercury in their roots and above ground portions. Lindernia crustacea (L. F.M., Digitaria radicosa (Presl Miq, Paspalum conjugatum, Cyperus kyllingia accumulated 89.13, 50.93, 1.78, and 0.77 ppm of Hg, respectively. Whereas, Paspalum conjugatum, Cyperus kyllingia accumulated 16.52 and 33. 16 ppm of CN respectively.

Optimization of the recycling process of precipitation barren solution in a uranium mine

International Nuclear Information System (INIS)

Long Qing; Yu Suqin; Zhao Wucheng; Han Wei; Zhang Hui; Chen Shuangxi

2014-01-01

Alkaline leaching process was adopted to recover uranium from ores in a uranium mine, and high concentration uranium solution, which would be later used in precipitation, was obtained after ion-exchange and elution steps. The eluting agent consisted of NaCl and NaHCO 3 . Though precipitation barren solution contained as high as 80 g/L Na 2 CO 3 , it still can not be recycled due to presence of high Cl - concentration So, both elution and precipitation processes were optimized in order to control the Cl - concentration in the precipitation barren solution to the recyclable concentration range. Because the precipitation barren solution can be recycled by optimization, the agent consumption was lowered and the discharge of waste water was reduced. (authors)

Draft environmental statement. Wyoming Mineral Corporation, Irigaray solution mining project (Johnson County, Wyoming)

International Nuclear Information System (INIS)

1978-04-01

The Irigaray project consists of solution mining (in situ leaching) operations involving uranium ore deposits in Johnson County, Wyoming. Solution mining activities will include a processing facility with an annual production of 500,000 lb of U 3 O 8 from up to 50 acres of well fields through the initial license authorization. The Irigaray project has an estimated lifetime of 10 to 20 years with known ore deposits and the current level of solution mining technology. Environmental impacts and adverse effects are summarized. The site is mostly used as grazing land for cattle and sheep. Initiation of the Irigaray project would result in the temporary removal from grazing and the disturbance of approximately 60 acres during operation. All disturbed surface areas will be reclaimed and returned to their original use. Approximately 1.2 x 10 6 m 3 (1000 acre-ft) of water will be withdrawn from the ore zone aquifer. This water will be conveyed to the onsite waste ponds for evaporation. An estimated 4.2 x 10 5 m 3 (340 acre-ft) of groundwater is expected to temporarily contain increased concentrations of radioactive and toxic elements during the operation of each 4-ha (10-acre) well field. Restoration should return this water to a condition that is consistent with its premining use (or potential use). There will be no discharge of liquid effluents from the Irigaray project. Atmospheric effluents will be within acceptable limits. The dose rates of radionuclides in the air at the nearest ranches from the plant site are tabulated. The Irigaray project proposes the production and utilization of 500,000 lb per year of uranium resources. The Irigaray project will not produce any significant socioeconomic impact on the local area because of the small number of employees that will be employed at the project

Solution (in situ leach) mining of uranium: an overview

International Nuclear Information System (INIS)

Kuhaida, A.J. Jr.; Kelly, M.J.

1978-01-01

Increases in the demand for and price of uranium have made in-situ mining an attractive alternative to the open-pit and underground U mining methods. Up to 50% of the known ore-bearing sandstone in the western U.S. can be mined using the in-situ mining method. In-situ mining also offers a significant environmental advantage. Restoration of the contaminated groundwater is discussed

Developments in uranium solution mining in Australia

International Nuclear Information System (INIS)

Hunter, T.

2001-01-01

The last five years have seen rapid developments in uranium solution mining in Australia, with one deposit brought into production (Beverley, 1,000 tpa U 3 O 8 ) and another close to receiving development approval (Honeymoon, 500 expanding to 1,000 tpa U 3 O 8 proposed). The deposits were discovered during extensive exploration of the Frome Basin in South Australia in the early 1970s and were mothballed from 1983 to 1996 due to Government policies. Uranium mineralisation at Beverley, Honeymoon and other related prospects is hosted in unconsolidated coarse grained quartz sands which are sealed in buried palaeovalleys. Both projects have successfully trialled acid leaching methods and have confirmed high permeability and confinement of the target sands. At Beverley an ion exchange process has been adopted, whereas at Honeymoon solvent extraction has been trialled and is proposed for future production Australian production economics compare favourably with US counterparts and are likely to be within the lower quartile of world costs

Assessment of trace ground-water contaminants release from south Texas in-situ uranium solution-mining sites

Energy Technology Data Exchange (ETDEWEB)

Kidwell, J.R.; Humenick, M.J.

1981-01-01

The future of uranium solution mining in south Texas depends heavily on the industry's ability to restore production zone ground water to acceptable standards. This study investigated the extent of trace contaminant solubilization during mining and subsequent restoration attempts, first through a literature search centered on uranium control mechanisms, and then by laboratory experiments simulating the mining process. The literature search indicated the complexity of the situation. The number of possible interactions between indigenous elements and materials pointed on the site specificity of the problem. The column studies evaluated three different production area ores. Uranium, molybdenum, arsenic, vanadium, and selenium were analyzed in column effluents. After simulated mining operations were completed, uranium was found to be the most persistent trace element. However, subsequent ground water flushing of the columns could restore in-situ water to EPA recommended drinking water concentrations. Limited data indicated that ground water flowing through mined areas may solubilize molybdenum present in down gradient areas adjacent to the production zone due to increased oxidation potential of ground water if adequate restoration procedures are not followed.

Surveys for detection and measurement of subsidence resulting from solution mining--why, what and how

International Nuclear Information System (INIS)

Piper, T.B.

1983-01-01

Subsidence resulting from solution mining is usually expressed at the earth's surface by downwarping or change in elevation. Areas of several tens or hundreds of acres are involved. These settlements can sometimes be accommodated by buildings and other installations if the subsidence is gentle or the area is large. On the other hand, mineral extraction sometimes results in collapse of a relatively small area (on the order of a few acres) known as a sinkhole. The relationship between these two events has not been demonstrated. Subsidence can be detected by measurements made in the area involved by either access or non-access methods. The results provide early warning of surface downwarping and can be used as input in operating decisions. Precise levelling of a network of shallow monuments has shown a high level of applicability to solution mining sites and offers the maximum cost-benefit ratio. Time vs. settlement plots and summary contour maps serve to present the data and identify areas of concern

Instrumentation for mine safety: fire and smoke problems and solutions

International Nuclear Information System (INIS)

Stevens, R.B.

1982-01-01

Underground fires continue to be one of the most serious hazards to life and property in the mining industry. Although underground mines are analogous to high-rise buildings where persons are isolated from immediate escape or rescue, application of technology to locate and control fire hazards while still in their controllable state is slow to be implemented in underground mines. This paper describes several USBM (Bureau of Mines) safety programs which included in-mine testing with mine fire and smoke sensors, telemetry and instrumentation to develop recommendations for improving mine fire safety. It is hoped that the technology developed during these programs can be added to other programs to provide the mining industry with the necessary fire safety facts. By recognizing fire potentials and being provided with cost-effective, proven components that will perform reliably under the poor environmental conditions of mining, mine operators can provide protection for their working life and property equal to that which they provide for themselves and their families at home. The basis of this report is two USBM programs for fire protection in metal and nonmetal mines and one coal program. The data was collected beginning in May 1974 and continuing through the present with underground tests of a South African fire system installed at Magma Mine in Superior, Arizona, and a computer-assisted, experimental system at Peabody Coal Mine in Pawnee, Illinois

Mining for solutions, extracting discord: corporate social responsibility and canadian mining companies in Latin America

OpenAIRE

Stevens, Julie Ann

2009-01-01

While the mining industry generates many benefits to society, the industry has in some cases had a detrimental impact on affected communities. This paradox, manifested in the unequal distribution of costs and benefits amongst stakeholders, has prompted widespread scrutiny of the mining industry. Critique of the industry has questioned whether mining provides an economically, environmentally and socially sustainable model of development. Mining companies are increasingly adopting Corporate Soc...

Evaluation of groundwater pollution in a mining area using analytical solution: a case study of the Yimin open-pit mine in China.

Science.gov (United States)

Li, Tianxin; Li, Li; Song, Hongqing; Meng, Linglong; Zhang, Shuli; Huang, Gang

2016-01-01

This study focused on using analytical and numerical models to develop and manage groundwater resources, and predict the effects of management measurements in the groundwater system. Movement of contaminants can be studied based on groundwater flow characteristics. This study can be used for prediction of ion concentration and evaluation of groundwater pollution as the theoretical basis. The Yimin open-pit mine is located in the northern part of the Inner Mongolia Autonomous Region of China. High concentrations of iron and manganese are observed in Yimin open-pit mine because of exploitation and pumping that have increased the concentration of the ions in groundwater. In this study, iron was considered as an index of contamination, and the solute model was calibrated using concentration observations from 14 wells in 2014. The groundwater flow model and analytical solutions were used in this study to forecast pollution concentration and variation trend after calibration. With continuous pumping, contaminants will migrate, and become enriched, towards the wellhead in the flow direction. The concentration of the contaminants and the range of pollution increase with the flow rate increased. The suitable flow rate of single well should be open-pit for the standard value of pollution concentration.

Solution of problems, emerging with the transition to thin seams mining on underground mines

International Nuclear Information System (INIS)

Malkin, A.S.; Podshivalov, V.E.; Zhdamirov, V.M.; Kostarev, A.P.; Kulakov, A.N.; Savchenkov, V.E.

1997-01-01

The greatest volume of useful carbon-energetical and carbon-technological resources in the countries of the world consists of coal. Most likely, problems of the development of coal wining technology and coal consumption will interest scientists and mining engineers for a long time. Moreover, competing with the petroleum and gas industries becomes increasingly difficult. Considerable increases in coal production in countries with warm climates, and favourable mining and geological conditions also damages the international market for the coal industries of Russia (and Australia, India, and Vietnam). In a situation of critical deficits in both financial and material means in Russia, it is necessary to change the structure of the means of production and investment policies for the development of coal mining at every individual mine. 1 fig

Data Mining Solutions for the Business Environment

OpenAIRE

Ruxandra-Stefania PETRE

2013-01-01

Over the past years, data mining became a matter of considerable importance due to the large amounts of data available in the applications belonging to various domains. Data mining, a dynamic and fast-expanding field, that applies advanced data analysis techniques, from statistics, machine learning, database systems or artificial intelligence, in order to discover relevant patterns, trends and relations contained within the data, information impossible to observe using other techniques. The p...

Evaluating Water Management Practice for Sustainable Mining

Directory of Open Access Journals (Sweden)

Xiangfeng Zhang

2014-02-01

Full Text Available To move towards sustainable development, the mining industry needs to identify better mine water management practices for reducing raw water use, increasing water use efficiency, and eliminating environmental impacts in a precondition of securing mining production. However, the selection of optimal mine water management practices is technically challenging due to the lack of scientific tools to comprehensively evaluate management options against a set of conflicting criteria. This work has provided a solution to aid the identification of more sustainable mine water management practices. The solution includes a conceptual framework for forming a decision hierarchy; an evaluation method for assessing mine water management practices; and a sensitivity analysis in view of different preferences of stakeholders or managers. The solution is applied to a case study of the evaluation of sustainable water management practices in 16 mines located in the Bowen Basin in Queensland, Australia. The evaluation results illustrate the usefulness of the proposed solution. A sensitivity analysis is performed according to preference weights of stakeholders or managers. Some measures are provided for assessing sensitivity of strategy ranking outcomes if the weight of an indicator changes. Finally, some advice is given to improve the mine water management in some mines.

Mines vs reactors: comparison of radiation problems and solutions

International Nuclear Information System (INIS)

Bush, W.R.

1981-01-01

Radiation protection in uranium mines and nuclear reactors is compared, with the objective of determining if any radiation protection practices which have worked well in one area can be adapted to the other area, especially from reactors to mines since radiation protection is more highly developed in reactors. Several areas are identified where improvements can be made in radiation protection in mines, the most important being improvement in ventilation at the workplace, greater attention to special monitoring during upset conditions, and a need for a substantial increase in radiation protection staff. It is concluded that, although considerable room exists for improvement, the general approach to radiation protection presently being followed seems appropriate for the circumstances encountered in mining

Mechanism of groundwater inrush hazard caused by solution mining in a multilayered rock-salt-mining area: a case study in Tongbai, China

Science.gov (United States)

Zeng, Bin; Shi, Tingting; Chen, Zhihua; Xiang, Liu; Xiang, Shaopeng; Yang, Muyi

2018-01-01

The solution mining of salt mineral resources may contaminate groundwater and lead to water inrush out of the ground due to brine leakage. Through the example of a serious groundwater inrush hazard in a large salt-mining area in Tongbai County, China, this study mainly aims to analyse the source and channel of the inrushing water. The mining area has three different types of ore beds including trona (trisodium hydrogendicarbonate dihydrate, also sodium sesquicarbonate dihydrate, with the formula Na2CO3 × NaHCO3 × 2H2O, it is a non-marine evaporite mineral), glauber (sodium sulfate, it is the inorganic compound with the formula Na2SO4 as well as several related hydrates) and gypsum (a soft sulfate mineral composed of calcium sulfate dihydrate, with chemical formula CaSO4 × 2H2O). Based on characterisation of the geological and hydrogeological conditions, the hydrochemical data of the groundwater at different points and depths were used to analyse the pollution source and the pollutant component from single or mixed brine by using physical-chemical reaction principle analysis and hydrogeochemical simulation method. Finally, a possible brine leakage connecting the channel to the ground was discussed from both the geological and artificial perspectives. The results reveal that the brine from the trona mine is the major pollution source; there is a NW-SE fissure zone controlled by the geological structure that provides the main channels through which brine can flow into the aquifer around the water inrush regions, with a large number of waste gypsum exploration boreholes channelling the polluted groundwater inrush out of the ground. This research can be a valuable reference for avoiding and assessing groundwater inrush hazards in similar rock-salt-mining areas, which is advantageous for both groundwater quality protection and public health.

Mining Survey System (MSS) - innovative solution in Polish mines. (Polish Title: Mobilna Platforma Gurnicza (MPG) - nowatorskim rozwilazaniem w polskich kopalniach)

Science.gov (United States)

Adamek, A.

2015-12-01

Mobile laser scanning technology is developing rapidly also in mining. For several years research and tests are conducted on the use of that type of measurement in the inventory of the mine shafts. The company SKALA 3D in the project 1.4 POIG by PARP undertook to create Mobile automatic steering system of spatial geometry measurements mine shafts using laser scanning technology. Its main advantage is a faithful reflection of the object being measured in just a few hours. It is based on the data flowing from laser scanners and precision inertial unit. The main problem of the research was to determine the trajectory of the passing Mobile Platforms Mining (MPG) in the shaft as accurately as possible. Unable to receive signals from satellites in the pipe shaft prevented the use of solutions known for measuring terrestrial mobile systems. The company SKALA 3D has developed a methodology for determine the trajectory of the system, based on geometrical data coming from laser scanners and readings of accelerometers and gyroscopes of inertial unit. To improve the quality and accuracy of measurements MPG is also equipped with a set of anti-vibration parts prevent the transmission of vibrations ascending while cage is moving in the shaft on the measuring system. The whole forms a calibrated system, which in a short time is able to provide spatial measurement data from the measuring shaft. The accuracy of 2-3 mm in a single measurement horizon and a few centimeters determine the position of a point on the thousandth meter below ground make the system very accurate. During the project there have been numerous research problems, including the need to define the physical references, drift of IMU whether harsh weather conditions in the shaft. However, the company SKALA 3D solved these problems and making MPG unique in the world.

Direct examination of cadmium bonding in rat tissues dosed with mine wastes and cadmium-containing solutions

International Nuclear Information System (INIS)

Diacomanolis, V.; Ng, J. C.; Sadler, R.; Harris, H. H.; Nomura, M.; Noller, B. N.

2010-01-01

Direct examination by XANES and EXAFS of metal bonding in tissue can be demonstrated by examining cadmium uptake and bonding in animal tissue maintained at cryogenic temperatures. XANES at the K-edge of cadmium were collected at the Photon Factory Advanced Ring (PF-AR), NW10A beam line at KEK-Tsukuba-Japan. Rats fed with 1g mine waste containing 8-400 mg/kg cadmium per 200g body weight (b.w.) or dosed by oral gavage with either cadmium chloride solution alone (at 6 mg/kg b.w.) or in combination with other salts (As, Cu or Zn), 5 days/week for 6 weeks, had 0.1-7.5 and 8-86 mg/kg cadmium in the liver or kidney, respectively. Rats given intraperitoneally (ip) or intravenously (iv) 1-4 times with 1 mg/kg b.w. cadmium solution had 30-120 mg/kg cadmium in the liver or kidney. Tissues from rats were kept and transferred at cryogenic temperature and XANES were recorded at 20 K. The spectra for rat liver samples suggested conjugation of cadmium with glutathione or association with the sulfide bond (Cd-S) of proteins and peptides. EXAFS of rat liver fed by Cd and Zn solutions showed that Cd was clearly bound to S ligands with an inter-atomic distance of 2.54 A ring for Cd-S that was similar to cadmium sulfide with an inter-atomic distance of 2.52 A ring for Cd-S. Liver or kidney of rats fed with mine wastes did not give an edge in the XANES spectra indicating little uptake of cadmium by the animals. Longer and higher dosing regimen may be required in order to observe the same Cd-S bond in the rat tissue from mine wastes, including confirmation by EXAFS.

Mining face equipment

Energy Technology Data Exchange (ETDEWEB)

G, Litvinskiy G; Babyuk, G V; Yakovenko, V A

1981-01-07

Mining face equipment includes drilling advance wells, drilling using explosives on the contour bore holes, loading and transporting the crushed mass, drilling reinforcement shafts, injecting reinforcement compounds and moving the timber. Camouflet explosives are used to form relaxed rock stress beyond the mining area to decrease costs of reinforcing the mining area by using nonstressed rock in the advance well as support. The strengthening solution is injected through advanced cementing wells before drilling the contour bores as well as through radial cementing wells beyond the timbers following loading and transport of the mining debris. The advance well is 50-80 m.

Imouraren mining exploitation : Complementary studies Synthetic report Volum B - Mines

International Nuclear Information System (INIS)

1980-01-01

The object of the current study is to determine the main technical characteristics of the reference project of a mine that can supply the necessary ore quantity at a production of 3000 tonnes uranium per year, along 10 years. The project is one of the possible solutions for exploiting the mine. The current study permits to establish : investment and functioning cost estimation, overall project of the mining exploitation program, necessary strength estimation, average ore grades evaluation and variations of these grades, utilities needs, production vizing program, main exploitation methods and necessary materials. Reference project study of the mine serves as base to the economics studies and studies optimization [fr

Recycling and reuse of wastewater from uranium mining and milling

International Nuclear Information System (INIS)

Xu Lechang; Gao Jie; Zhang Xueli; Wei Guangzhi; Zhang Guopu

2010-01-01

Uranium mining/milling process, and the sources, recycling/reuse approach and treatment methods of process wastewater are introduced. The wastewater sources of uranium mining and milling include effluent, raffinate, tailings water, mine discharge, resin form converted solution, and precipitation mother liquor. Wastewater can be recycled/reused for leachant, eluent, stripping solution,washing solution and tailings slurry. (authors)

Mechanism of groundwater inrush hazard caused by solution mining in a multilayered rock-salt-mining area: a case study in Tongbai, China

Directory of Open Access Journals (Sweden)

B. Zeng

2018-01-01

Full Text Available The solution mining of salt mineral resources may contaminate groundwater and lead to water inrush out of the ground due to brine leakage. Through the example of a serious groundwater inrush hazard in a large salt-mining area in Tongbai County, China, this study mainly aims to analyse the source and channel of the inrushing water. The mining area has three different types of ore beds including trona (trisodium hydrogendicarbonate dihydrate, also sodium sesquicarbonate dihydrate, with the formula Na2CO3  ×  NaHCO3  ×  2H2O, it is a non-marine evaporite mineral, glauber (sodium sulfate, it is the inorganic compound with the formula Na2SO4 as well as several related hydrates and gypsum (a soft sulfate mineral composed of calcium sulfate dihydrate, with chemical formula CaSO4  ×  2H2O. Based on characterisation of the geological and hydrogeological conditions, the hydrochemical data of the groundwater at different points and depths were used to analyse the pollution source and the pollutant component from single or mixed brine by using physical–chemical reaction principle analysis and hydrogeochemical simulation method. Finally, a possible brine leakage connecting the channel to the ground was discussed from both the geological and artificial perspectives. The results reveal that the brine from the trona mine is the major pollution source; there is a NW–SE fissure zone controlled by the geological structure that provides the main channels through which brine can flow into the aquifer around the water inrush regions, with a large number of waste gypsum exploration boreholes channelling the polluted groundwater inrush out of the ground. This research can be a valuable reference for avoiding and assessing groundwater inrush hazards in similar rock-salt-mining areas, which is advantageous for both groundwater quality protection and public health.

Deactivation and treatment of mine wastewaters and of aqueous solutions discharged in uranium ore treatment and processing

International Nuclear Information System (INIS)

Jilek, R.; Prochazka, H.; Fuska, J.; Nemec, P.; Katzer, J.

1974-01-01

A description is presented of decontamination and purification of mine wastewaters and water solutions discharged from uranium ore treatment and processing and of the simultaneous removal and concentration of uranium-radium daughters, mainly of 226 Ra and 210 Pb. These elements are incorporated in the mycelium of microorganisms, such as those of the Fungi imperfecti class or are sorbed on the mycelium surface. The mycelia are then mechanically separated from the decontaminated solution, e.g., by filtration, centrifugation or sedimentation. The mycelium may be cultivated in the purified solutions to which nutrients are added, such as carbon, nitrogen and phosphorus in concentrations necessary for the growth of the microorganisms used. The mycelium may be added to the purified solution either in the native or in the dried state. (B.S.)

Abandoned Mine Waste Working Group report

International Nuclear Information System (INIS)

1993-01-01

The Mine Waste Working Group discussed the nature and possible contributions to the solution of this class of waste problem at length. There was a consensus that the mine waste problem presented some fundamental differences from the other classes of waste addresses by the Develop On-Site Innovative Technologies (DOIT) working groups. Contents of this report are: executive summary; stakeholders address the problems; the mine waste program; current technology development programs; problems and issues that need to be addressed; demonstration projects to test solutions; conclusion-next steps; and appendices

Mastering SQL Server 2014 data mining

CERN Document Server

Bassan, Amarpreet Singh

2014-01-01

If you are a developer who is working on data mining for large companies and would like to enhance your knowledge of SQL Server Data Mining Suite, this book is for you. Whether you are brand new to data mining or are a seasoned expert, you will be able to master the skills needed to build a data mining solution.

Expansion of Neyveli lignite mines

Energy Technology Data Exchange (ETDEWEB)

Kasturi, T S

1982-06-01

This paper describes activities at Neyveli lignite mines in the Tamil Nadu region of India. The equipment used, in mining and materials handling is described. Problems encountered in the conveyor transport system are described, and the solutions finally adopted are presented.

Transparent data mining for big and small data

CERN Document Server

Quercia, Daniele; Pasquale, Frank

2017-01-01

This book focuses on new and emerging data mining solutions that offer a greater level of transparency than existing solutions. Transparent data mining solutions with desirable properties (e.g. effective, fully automatic, scalable) are covered in the book. Experimental findings of transparent solutions are tailored to different domain experts, and experimental metrics for evaluating algorithmic transparency are presented. The book also discusses societal effects of black box vs. transparent approaches to data mining, as well as real-world use cases for these approaches. As algorithms increasingly support different aspects of modern life, a greater level of transparency is sorely needed, not least because discrimination and biases have to be avoided. With contributions from domain experts, this book provides an overview of an emerging area of data mining that has profound societal consequences, and provides the technical background to for readers to contribute to the field or to put existing approaches to prac...

Applications of Geomatics in Surface Mining

Science.gov (United States)

Blachowski, Jan; Górniak-Zimroz, Justyna; Milczarek, Wojciech; Pactwa, Katarzyna

2017-12-01

In terms of method of extracting mineral from deposit, mining can be classified into: surface, underground, and borehole mining. Surface mining is a form of mining, in which the soil and the rock covering the mineral deposits are removed. Types of surface mining include mainly strip and open-cast methods, as well as quarrying. Tasks associated with surface mining of minerals include: resource estimation and deposit documentation, mine planning and deposit access, mine plant development, extraction of minerals from deposits, mineral and waste processing, reclamation and reclamation of former mining grounds. At each stage of mining, geodata describing changes occurring in space during the entire life cycle of surface mining project should be taken into consideration, i.e. collected, analysed, processed, examined, distributed. These data result from direct (e.g. geodetic) and indirect (i.e. remote or relative) measurements and observations including airborne and satellite methods, geotechnical, geological and hydrogeological data, and data from other types of sensors, e.g. located on mining equipment and infrastructure, mine plans and maps. Management of such vast sources and sets of geodata, as well as information resulting from processing, integrated analysis and examining such data can be facilitated with geomatic solutions. Geomatics is a discipline of gathering, processing, interpreting, storing and delivering spatially referenced information. Thus, geomatics integrates methods and technologies used for collecting, management, processing, visualizing and distributing spatial data. In other words, its meaning covers practically every method and tool from spatial data acquisition to distribution. In this work examples of application of geomatic solutions in surface mining on representative case studies in various stages of mine operation have been presented. These applications include: prospecting and documenting mineral deposits, assessment of land accessibility

Location of microseismic swarms induced by salt solution mining

Science.gov (United States)

Kinscher, J.; Bernard, P.; Contrucci, I.; Mangeney, A.; Piguet, J. P.; Bigarre, P.

2015-01-01

Ground failures, caving processes and collapses of large natural or man-made underground cavities can produce significant socio-economic damages and represent a serious risk envisaged by the mine managements and municipalities. In order to improve our understanding of the mechanisms governing such a geohazard and to test the potential of geophysical methods to prevent them, the development and collapse of a salt solution mining cavity was monitored in the Lorraine basin in northeastern France. During the experiment, a huge microseismic data set (˜50 000 event files) was recorded by a local microseismic network. 80 per cent of the data comprised unusual swarming sequences with complex clusters of superimposed microseismic events which could not be processed through standard automatic detection and location routines. Here, we present two probabilistic methods which provide a powerful tool to assess the spatio-temporal characteristics of these swarming sequences in an automatic manner. Both methods take advantage of strong attenuation effects and significantly polarized P-wave energies at higher frequencies (>100 Hz). The first location approach uses simple signal amplitude estimates for different frequency bands, and an attenuation model to constrain the hypocentre locations. The second approach was designed to identify significantly polarized P-wave energies and the associated polarization angles which provide very valuable information on the hypocentre location. Both methods are applied to a microseismic data set recorded during an important step of the development of the cavity, that is, before its collapse. From our results, systematic spatio-temporal epicentre migration trends are observed in the order of seconds to minutes and several tens of meters which are partially associated with cyclic behaviours. In addition, from spatio-temporal distribution of epicentre clusters we observed similar epicentre migration in the order of hours and days. All together, we

Fatal accidents analysis in Peruvian mining industry

International Nuclear Information System (INIS)

Candia, R. C.; Hennies, W. T.; Azevedo, R. c.; Almeida, I.G.; Soto, J. F.

2010-01-01

Although reductions in the tax of injuries and accidents have been observed in recent years, Mining is still one of the highest risks industries. The basic causes for occurrence of fatalities can be attributed to unsafe conditions and unsafe acts. In this scene is necessary to identify safety problems and to aim the effective solutions. On the other hand, the developing countries dependence on primary industries as mining is evident. In the Peruvian economy, approximately 16% of the GNP and more than 50% of the exportations are due to the mining sector, detaching its competitive position in the worldwide mining. This paper presents fatal accidents analysis in the Peruvian mining industry, having as basis the register of occurred fatal accidents since year 2000 until 2007, identifying the main types of accidents occurred. The source of primary information is the General Mining Direction (DGM) of the Peruvian Mining and Energy Ministry (MEM). The majority of victims belongs to tertiary contractor companies that render services for mine companies. The results of the analysis show also that the majority of accidents happened in the underground mines, and that it is necessary to propose effective solutions to manage risks, aiming at reducing the fatal accidents taxes. (Author)

Stability of interbed for salt cavern gas storage in solution mining considering cusp displacement catastrophe theory

Directory of Open Access Journals (Sweden)

Le Yu

2015-03-01

Full Text Available Cusp displacement catastrophe theory can be introduced to propose a new method about instability failure of the interbed for gas storage cavern in bedded salt in solution mining. We can calculate initial fracture drawing pace of this interbed to obtain 2D and 3D gas storage shapes at this time. Moreover, Stability evaluation of strength reduction finite element method (FEM based on this catastrophe theory can used to evaluate this interbed stability after initial fracture. A specific example is simulated to obtain the influence of the interbed depth, cavern internal pressure, and cavern building time on stability safety factor (SSF. The results indicate: the value of SSF will be lower with the increase of cavern building time in solution mining and the increase of interbed depth and also this value remains a rise with the increase of cavern internal pressure Especially, we can conclude that the second-fracture of the interbed may take place when this pressure is lower than 6 MPa or after 6 days later of the interbed after initial fracture. According to above analysis, some effective measures, namely elevating the tube up to the top of the interbed, or changing the circulation of in-and-out lines, can be introduced to avoid the negative effects when the second-fracture of the interbed may occur.

WEB STRUCTURE MINING

Directory of Open Access Journals (Sweden)

CLAUDIA ELENA DINUCĂ

2011-01-01

Full Text Available The World Wide Web became one of the most valuable resources for information retrievals and knowledge discoveries due to the permanent increasing of the amount of data available online. Taking into consideration the web dimension, the users get easily lost in the web’s rich hyper structure. Application of data mining methods is the right solution for knowledge discovery on the Web. The knowledge extracted from the Web can be used to raise the performances for Web information retrievals, question answering and Web based data warehousing. In this paper, I provide an introduction of Web mining categories and I focus on one of these categories: the Web structure mining. Web structure mining, one of three categories of web mining for data, is a tool used to identify the relationship between Web pages linked by information or direct link connection. It offers information about how different pages are linked together to form this huge web. Web Structure Mining finds hidden basic structures and uses hyperlinks for more web applications such as web search.

A research for environmental problems in the vicinity of mining area. Investigation into the impact of metallic mining on the environment and solutions

Energy Technology Data Exchange (ETDEWEB)

Min, Jeong Sik; Cheong, Young Wook; Lee, Hyun Joo; Song, Duk Young [Korea Inst. of Geology Mining and Materials, Taejon (Korea, Republic of)

1995-12-01

This study is focused on the impacts of metalliferous mines on the environment in the vicinity of the abandoned and active mines and establishment of abatements of mining environmental problems. Total number of metalliferous mines surveyed were 40 in which samples of waters, mine wastes and soil were taken. Water parameters such as the pH, Eh, TDS, conductivity, turbidity, dissolved oxygen and temperature were measured in the field. Elements such as As, Cd, Pb, Zn, Cu, Al, Mn, sulfate and cyanide were analyzed. Significant concentrations of heavy metals, mainly Cd, Zn, Cu, Fe, Mn and Al, were found in mine waters from adit and in leachates extracted from mine wastes. The mine waters flowing out from the Dalsung and Ilgwang mines were the typical acid mine drainage(AMD) contaminated by the heavy metals. Passive biological systems(Anoxic wetland) to treat AMD for metals were designed and monitored for effluents from the reactors with 4 types of composts, cow manure and limestones, Results showed that the mushroom compost with cow manure and limestone was the best substrates in metal removing efficiencies. Results from leaching of mine wastes showed that As, Cd and Cu were extracted from some of mine wastes. AMD from the mine waste dump of the Daduk mine was found. These mean that mine wastes can contaminate the soil, surface water and ground waters in vicinity of mines. Therefore cover systems or liner system for containments of mine wastes were suggested to preserve the environment. Cu and As concentrations in soils surveyed were below the heavy metal concentrations in soils of Korean standard preventing plant of the crops. However, most of the acid mine waters are drained untreated, and mine wastes with heavy metals are distributed near soil environment. Therefore efforts to reduce possibilities of soil contamination in the vicinity of mining areas is required. (author). 33 refs.

Data Mining Aplications in Livestock

Directory of Open Access Journals (Sweden)

Feyza ALEV ÇETİN

2016-03-01

Full Text Available Data mining provides discovering the required and applicable knowledge from very large amounts of information collected in one centre. Data mining has been used in the information industry and society. Although many methods of data mining has been used, these techniques has been remarkable in animal husbandry in recent years. For the solution of complex problems in animal husbandry many methods were discussed and developed. Brief information on data mining techniques such as k-means approach, k-nearest neighbor approach, multivariate adaptive regression function (MARS, naive Bayesian classifiers (NBC, artificial neural networks (ANN, support vector machines (SVM, decision trees are given in the study. Some data mining methods are presented and examples of the application of data mining in the field of animal husbandry in the world are provided with this study.

Uranium mining

International Nuclear Information System (INIS)

2008-01-01

Full text: The economic and environmental sustainability of uranium mining has been analysed by Monash University researcher Dr Gavin Mudd in a paper that challenges the perception that uranium mining is an 'infinite quality source' that provides solutions to the world's demand for energy. Dr Mudd says information on the uranium industry touted by politicians and mining companies is not necessarily inaccurate, but it does not tell the whole story, being often just an average snapshot of the costs of uranium mining today without reflecting the escalating costs associated with the process in years to come. 'From a sustainability perspective, it is critical to evaluate accurately the true lifecycle costs of all forms of electricity production, especially with respect to greenhouse emissions, ' he says. 'For nuclear power, a significant proportion of greenhouse emissions are derived from the fuel supply, including uranium mining, milling, enrichment and fuel manufacture.' Dr Mudd found that financial and environmental costs escalate dramatically as the uranium ore is used. The deeper the mining process required to extract the ore, the higher the cost for mining companies, the greater the impact on the environment and the more resources needed to obtain the product. I t is clear that there is a strong sensitivity of energy and water consumption and greenhouse emissions to ore grade, and that ore grades are likely to continue to decline gradually in the medium to long term. These issues are critical to the current debate over nuclear power and greenhouse emissions, especially with respect to ascribing sustainability to such activities as uranium mining and milling. For example, mining at Roxby Downs is responsible for the emission of over one million tonnes of greenhouse gases per year and this could increase to four million tonnes if the mine is expanded.'

Data mining in agriculture

CERN Document Server

Mucherino, Antonio; Pardalos, Panos M

2009-01-01

Data Mining in Agriculture represents a comprehensive effort to provide graduate students and researchers with an analytical text on data mining techniques applied to agriculture and environmental related fields. This book presents both theoretical and practical insights with a focus on presenting the context of each data mining technique rather intuitively with ample concrete examples represented graphically and with algorithms written in MATLAB®. Examples and exercises with solutions are provided at the end of each chapter to facilitate the comprehension of the material. For each data mining technique described in the book variants and improvements of the basic algorithm are also given. Also by P.J. Papajorgji and P.M. Pardalos: Advances in Modeling Agricultural Systems, 'Springer Optimization and its Applications' vol. 25, ©2009.

Tracking Health and Well-Being in Goa's Mining Belt

International Development Research Centre (IDRC) Digital Library (Canada)

Nancy Minogue

The search for balance. “Closing the mines because of their environmental impact is not an option ... As a result, local communities, governments, and mining companies are ... in mining communities would be critical to arriving at work- able solutions. ... “quality of life” instrument to assess the well-being of people in mining ...

Application of bacterial leaching technology to deep solution-mining conditions for uranium extraction. Final report, September 1, 1978-September 30, 1981

International Nuclear Information System (INIS)

Brierley, J.A.; Brierley, C.L.; Torma, A.E.

1982-03-01

Microorganisms were evaluated for use in recovery of uranium under conditions of in-situ solution mining. The cultures tested were Thiobacillus ferrooxidans, the faculative-thermophilic TH3 strain, and two Sulfolobus species. Growth of the organisms occurred in the presence of 0.34 to 5.0 mM uranyl ion with higher concentrations being inhibitory. Uranium ore from the Anaconda Minerals Co. Jackpile mine was not readily leachable by microorganisms. To support bacterial activity the ore was supplemented with pyrite or ferrous iron. The ore possessed some toxic properties. T. ferrooxidans was able to assist in leaching of uranium from the ore at a hydrostatic pressure of 10.3 MPa

Granular-relational data mining how to mine relational data in the paradigm of granular computing ?

CERN Document Server

Hońko, Piotr

2017-01-01

This book provides two general granular computing approaches to mining relational data, the first of which uses abstract descriptions of relational objects to build their granular representation, while the second extends existing granular data mining solutions to a relational case. Both approaches make it possible to perform and improve popular data mining tasks such as classification, clustering, and association discovery. How can different relational data mining tasks best be unified? How can the construction process of relational patterns be simplified? How can richer knowledge from relational data be discovered? All these questions can be answered in the same way: by mining relational data in the paradigm of granular computing! This book will allow readers with previous experience in the field of relational data mining to discover the many benefits of its granular perspective. In turn, those readers familiar with the paradigm of granular computing will find valuable insights on its application to mining r...

Implications of Emerging Data Mining

Science.gov (United States)

Kulathuramaiyer, Narayanan; Maurer, Hermann

Data Mining describes a technology that discovers non-trivial hidden patterns in a large collection of data. Although this technology has a tremendous impact on our lives, the invaluable contributions of this invisible technology often go unnoticed. This paper discusses advances in data mining while focusing on the emerging data mining capability. Such data mining applications perform multidimensional mining on a wide variety of heterogeneous data sources, providing solutions to many unresolved problems. This paper also highlights the advantages and disadvantages arising from the ever-expanding scope of data mining. Data Mining augments human intelligence by equipping us with a wealth of knowledge and by empowering us to perform our daily tasks better. As the mining scope and capacity increases, users and organizations become more willing to compromise privacy. The huge data stores of the ‚master miners` allow them to gain deep insights into individual lifestyles and their social and behavioural patterns. Data integration and analysis capability of combining business and financial trends together with the ability to deterministically track market changes will drastically affect our lives.

Uranium mines of Tajikistan

International Nuclear Information System (INIS)

Razykov, Z.A; Gusakov, E.G.; Marushenko, A.A.; Botov, A.Yu.; Yunusov, M.M.

2002-12-01

The book describes location laws, the main properties of geological structure and industrial perspectives for known uranium mines of the Republic of Tajikistan. Used methods of industrial processing of uranium mines are described. The results of investigations of technological properties of main types of uranium ores and methods of industrial processing of some of them are shown. Main properties of uranium are shortly described as well as problems, connected with it, which arise during exploitation, mining and processing of uranium ores. The main methods of solution of these problems are shown. The book has interest for specialists of mining, geological, chemical, and technological fields as well as for students of appropriate universities. This book will be interested for usual reader, too, if they are interested in mineral resources of their country [ru

Intermediate and long-term radiological consequences of an uncontrolled access of saline solution into the Asse mine - 59163

International Nuclear Information System (INIS)

Ustohalova, Veronika; Kueppers, Christian

2012-01-01

analytical solution of one- or two-dimensional dispersion-convention transport equation. The tool 'Migration' allows to quickly estimate the possible ranges of radioactive contamination in the ground water table over time whereas several parameters can be varied. The radiological exposure in the tool 'Exposure' can be calculated according to Gernrman approach AVV [3] or BglB [4]. The calculation model was tested on specific examples and the agreement with the reality was proven. There have been several approaches published on the subject of groundwater flow or radionuclide transfer in Asse mine but no one introduced more exactly radionuclide migration with coupled migration of decay chains and combined it in addition with the computation of radionuclide transfer in the biosphere. (authors)

Acid mine drainage

Science.gov (United States)

Bigham, Jerry M.; Cravotta, Charles A.

2016-01-01

Acid mine drainage (AMD) consists of metal-laden solutions produced by the oxidative dissolution of iron sulfide minerals exposed to air, moisture, and acidophilic microbes during the mining of coal and metal deposits. The pH of AMD is usually in the range of 2–6, but mine-impacted waters at circumneutral pH (5–8) are also common. Mine drainage usually contains elevated concentrations of sulfate, iron, aluminum, and other potentially toxic metals leached from rock that hydrolyze and coprecipitate to form rust-colored encrustations or sediments. When AMD is discharged into surface waters or groundwaters, degradation of water quality, injury to aquatic life, and corrosion or encrustation of engineered structures can occur for substantial distances. Prevention and remediation strategies should consider the biogeochemical complexity of the system, the longevity of AMD pollution, the predictive power of geochemical modeling, and the full range of available field technologies for problem mitigation.

The financial assurance of obliteration of mining activity consequences

OpenAIRE

Jaroslav Dvořáček

2004-01-01

The contribution deals with the financing of the obliteration of the mining activity consequences process which is considered as the general problem of mining industry connected with the mining activity completion. It deals with the existing law solution of this sphere in the Czech Republic and the changes expected. The procedures of the resources ensuring for the mining activity consequences obliteration used in abroad are mentioned here.

Limitations in small artisanal gold mining addressed by educational components paired with alternative mining methods.

Science.gov (United States)

Zolnikov, Tara R

2012-03-01

Current solutions continue to be inadequate in addressing the longstanding, worldwide problem of mercury emissions from small artisanal gold mining. Mercury, an inexpensive and easily accessible heavy metal, is used in the process of extracting gold from ore. Mercury emissions disperse, affecting human populations by causing adverse health effects and environmental and social ramifications. Many developing nations have sizable gold ore deposits, making small artisanal gold mining a major source of employment in the world. Poverty drives vulnerable, rural populations into gold mining because of social and economic instabilities. Educational programs responding to this environmental hazard have been implemented in the past, but have had low positive results due to lack of governmental support and little economic incentive. Educational and enforced intervention programs must be developed in conjunction with governmental agencies in order to successfully eliminate this ongoing problem. Industry leaders offered hopeful suggestions, but revealed limitations when trying to develop encompassing solutions to halt mercury emissions. This research highlights potential options that have been attempted in the past and suggests alternative solutions to improve upon these methods. Some methods include buyer impact recognition, risk assessment proposals exposing a cost-benefit analysis and toxicokinetic modeling, public health awareness campaigns, and the education of miners, healthcare workers, and locals within hazardous areas of mercury exposure. These methods, paired with the implementation of alternative mining techniques, propose a substantial reduction of mercury emissions. Copyright © 2011 Elsevier B.V. All rights reserved.

Groundwater restoration with in situ uranium leach mining

International Nuclear Information System (INIS)

Charbeneau, R.J.

1984-01-01

In situ leach mining of uranium has developed into a major mining technology. Since 1975, when the first commercial mine was licensed in the United States, the percentage or uranium produced by in situ mining has steadily grown from 0.6 to 10 percent in 1980. Part of the reason for this growth is that in situ mining offers less initial capital investment, shorter start-up times, greater safety, and less labor than conventional mining methods. There is little disturbance of the surface terrain or surface waters, no mill tailings piles, and no large open pits, but in situ leaching mining does have environmental disadvantages. During the mining, large amounts of ground water are cirulated and there is some withdrawal from an area where aquifers constitute a major portion of the water supply for other purposes. When an ammonia-based leach system is used, the ammonium ion is introduced into an area where cation exchange on clays (and some production of nitrate) may occur. Also, injection of an oxidant with the leach solution causes valence and phase changes of indigenous elements such as As, Cu, Fe, Mo, Se, S, and V as well as U. Furthermore, the surrounding ground water can become contaminated by escape of the leach solution from the mining zone. This chapter presents an overview of the in situ mining technology, including uranium deposition, mining techniques, and ground water restoration alternatives. The latter part of the chapter covers the situation in South Texas. Economics and development of the industry, groundwater resources, regulation, and restoration activities are also reviewed

The modernisation of mining

CSIR Research Space (South Africa)

Ritchken, E

2017-10-01

Full Text Available mechanisms that will entrench the collaboration. The Phakisa had the task of developing collaborative solutions in response to the mining cluster challenges. • Operates through threat • Company focus • Objective is to comply • Company acts... in relative isolation. • Focus on ticking boxes • Focus on individual, easy to measure, projects of limited ambition • Funding through mining company balance sheet. • Creativity unlocked in finding loop- holes in compliance framework – does...

Socially Responsible Mining: the Relationship between Mining and Poverty, Human Health and the Environment

Science.gov (United States)

Maier, Raina M.; Díaz-Barriga, Fernando; Field, James A.; Hopkins, James; Klein, Bern; Poulton, Mary M.

2016-01-01

Increasing global demand for metals is straining the ability of the mining industry to physically keep up with demand (physical scarcity). On the other hand, social issues including the environmental and human health consequences of mining as well as the disparity in income distribution from mining revenues are disproportionately felt at the local community level. This has created social rifts, particularly in the developing world, between affected communities and both industry and governments. Such rifts can result in a disruption of the steady supply of metals (situational scarcity). Here we discuss the importance of mining in relationship to poverty, identify steps that have been taken to create a framework for socially responsible mining, and then discuss the need for academia to work in partnership with communities, government, and industry to develop trans-disciplinary research-based step change solutions to the intertwined problems of physical and situational scarcity. PMID:24552962

Proceedings of the 11. annual mining industry learning seminar : 2006 equipment evolutions

Energy Technology Data Exchange (ETDEWEB)

Joseph, T. [Alberta Univ., Edmonton, AB (Canada). School of Mining and Petroleum Engineering] (comp.)

2006-07-01

This seminar provided a forum for mine engineers, geologists, operators, vendors and academics to discuss various topics on equipment evolution that address mining industry concerns. Participants included those who are involved in mine planning, equipment selection, operations and maintenance. The presentations identified possible solutions to ongoing issues and alternative technologies emerging in the mining industry. Operators and original equipment manufacturers shared their innovations in novel developments and presented solutions to issues relevant to mining processes including truck and shovel technology issues such as tires, lube and fuel emissions. The seminar featured 17 presentations, of which 5 have been catalogued separately for inclusion in this database. tabs., figs.

Uranium mining and its direction of development in China

International Nuclear Information System (INIS)

Feng Fuxian

1993-01-01

The features, current situation, achievements, problems and directions of development of uranium mining in China are presented. For over 30 years, the great successes have been achieved in the mining systems and technologies, the trackless mining and solution mining, the ventilation and radiation protection. But the economic benefit is still poor in mining due to the complex geological conditions, small ore bodies and their scattered distribution with lower uranium grade, low level of mechanization in mining and lower production efficiency. So it will be the direction of development in future to accelerate the development in mining science, to improve traditional mining technologies, to construct and to transform the mines with the purpose of increasing the benefit and decreasing the costs of production

Underground coal mining technology - the future

Energy Technology Data Exchange (ETDEWEB)

Lama, R P [Kembla Coal and Coke Pty Limited, Wollongong, NSW (Australia)

1989-01-01

Discusses development of underground coal mining in Australia in the last four decades. The following aspects are reviewed: technology for underground mining (longwall mining, unidirectional cutting, bidirectional cutting, operation of more than one shearer on a working face, optimum dimensions of longwall blocks), longwall productivity (productivity increase will depend on increasing the availability factor of equipment, reducing failures due to human errors, organizational models, improving on-site decision making, improving monitoring, maintenance, planning and scheduling, concept of 'Transparent Mine'), roadway development systems (types of heading machines, standard systems for mine drivage and roof bolting and their productivity), size of coal mines, man and material transport systems (20,000-30,000 t/d from a single longwall face, mine shafts with a diameter 9-10 m), mine layout design (layout of longwall blocks, main intakes and returns situated in rock layers), mine environmental systems (ventilation systems, gas control), management, training and interpersonal relationships. Future coal mines will be developed with an integral capacity of 8-10 Mt/a from a single longwall operation with main development arteries placed in rocks. Development of gate roadways will require novel solutions with continuous cutting, loading and bolting. Information technology, with the concept of 'transparent mine', will form the backbone of decision making.

Origin of acid mine drainage in Enugu

International Nuclear Information System (INIS)

Uma, K.O.

1992-01-01

Mine flooding is a serious problem in the Enugu Coal Mines and has led to the abandonment of two of the four mines. About 1800 m 3 of water is pumped out daily from the mines into the nearby streams. The source of this enormous volume of water has been established based on the hydrodynamics and hydrology of the area. Two prolific aquifers - an unconfined and a confined system - overlie the mines, but the mine water is derived principally from the unconfined aquifer. The pathway of flow is, provided by the numerous fractures connecting the two aquifers and the mine tunnel. The major hydrochemical activity resulting in pollution of the mine water occurs within the sumps in the floor of the longwalls. These sumps act as oxidation chambers where groundwater from the fractures mixes and subsequently reacts with sulfur-rich solutes released by coal mining. Contrary to general belief, the mine drainage has not seriously degraded the chemistry of receiving streams. The pH and electric conductivity, representing, the dissolved ions, were increased less than 10% of the values in the unaffected region

Groundwater restoration of uranium ISL mines in the United States

International Nuclear Information System (INIS)

Catchpole, G.; Kuchelka, R.

1993-01-01

Although the in-situ leach (ISL) mining of uranium in the US started in the 1960's, the real expansion of this form of mining, which is also called solution mining, took place in the early to mid 1970's in Texas. Some of the early test work used an acid lixiviant but it was soon recognized that, because of environmental considerations, the use of alkaline lixiviants would be preferable to the regulatory agencies and the public. In the past, the two types of alkaline based lixiviants used at US ISL mines were ammonia bicarbonate and sodium bicarbonate. A few ISL mines get by with just adding carbon dioxide to the well field solution. Ammonia bicarbonate is no longer being used today in the US because of the difficulties and expense of restoring the water quality to acceptable standards following mining. This paper briefly describes ISL mining principles and then details procedures and techniques used at USA ISL uranium mines to restore water quality in the mined aquifer. The basic elements are fairly constant but there can be considerable variation in type of water treatment equipment, methods of waste water disposal and use of chemical reducing agents. Three case histories are also presented

Scalable Frequent Subgraph Mining

KAUST Repository

Abdelhamid, Ehab

2017-06-19

A graph is a data structure that contains a set of nodes and a set of edges connecting these nodes. Nodes represent objects while edges model relationships among these objects. Graphs are used in various domains due to their ability to model complex relations among several objects. Given an input graph, the Frequent Subgraph Mining (FSM) task finds all subgraphs with frequencies exceeding a given threshold. FSM is crucial for graph analysis, and it is an essential building block in a variety of applications, such as graph clustering and indexing. FSM is computationally expensive, and its existing solutions are extremely slow. Consequently, these solutions are incapable of mining modern large graphs. This slowness is caused by the underlying approaches of these solutions which require finding and storing an excessive amount of subgraph matches. This dissertation proposes a scalable solution for FSM that avoids the limitations of previous work. This solution is composed of four components. The first component is a single-threaded technique which, for each candidate subgraph, needs to find only a minimal number of matches. The second component is a scalable parallel FSM technique that utilizes a novel two-phase approach. The first phase quickly builds an approximate search space, which is then used by the second phase to optimize and balance the workload of the FSM task. The third component focuses on accelerating frequency evaluation, which is a critical step in FSM. To do so, a machine learning model is employed to predict the type of each graph node, and accordingly, an optimized method is selected to evaluate that node. The fourth component focuses on mining dynamic graphs, such as social networks. To this end, an incremental index is maintained during the dynamic updates. Only this index is processed and updated for the majority of graph updates. Consequently, search space is significantly pruned and efficiency is improved. The empirical evaluation shows that the

Definition and validation of process mining use cases

NARCIS (Netherlands)

Ailenei, I.; Rozinat, A.; Eckert, A.; Aalst, van der W.M.P.; Daniel, F.; Barkaoui, K.; Dustdar, S.

2012-01-01

Process mining is an emerging topic in the BPM marketplace. Recently, several (commercial) software solutions have become available. Due to the lack of an evaluation framework, it is very difficult for potential users to assess the strengths and weaknesses of these process mining tools. As the first

ANFO bulk loading in coal mines

Energy Technology Data Exchange (ETDEWEB)

Gajjar, A.

1987-08-01

With India's total coal production projected to increase from 152 to 237 million tons by 1990, net additional production from new mines must be more because of substantial depletion in existing mines. This article discusses the best possible application of explosive techniques in open-cast coal mines to economize production cost. The most energy-efficient and safest explosive is ANFO (ammonium nitrate, fuel oil); however, manual charging by INFO is not possible. Therefore, the solution is the application of bulk-loading systems of ANFO for giant mining operations. Cost of blasting per ton of coal production in India is in the range of Rs 25. Thus, the author suggests it will be the responsibility of mining engineers to see that the ANFO based bulk-loading system is implemented and the cost of production per ton reduced to Rs 19.50.

Practical mine ventilation optimization based on genetic algorithms for free splitting networks

Energy Technology Data Exchange (ETDEWEB)

Acuna, E.; Maynard, R.; Hall, S. [Laurentian Univ., Sudbury, ON (Canada). Mirarco Mining Innovation; Hardcastle, S.G.; Li, G. [Natural Resources Canada, Sudbury, ON (Canada). CANMET Mining and Mineral Sciences Laboratories; Lowndes, I.S. [Nottingham Univ., Nottingham (United Kingdom). Process and Environmental Research Division; Tonnos, A. [Bestech, Sudbury, ON (Canada)

2010-07-01

The method used to optimize the design and operation of mine ventilation has generally been based on case studies and expert knowledge. It has yet to benefit from optimization techniques used and proven in other fields of engineering. Currently, optimization of mine ventilation systems is a manual based decision process performed by an experienced mine ventilation specialist assisted by commercial ventilation distribution solvers. These analysis tools are widely used in the mining industry to evaluate the practical and economic viability of alternative ventilation system configurations. The scenario which is usually selected is the one that reports the lowest energy consumption while delivering the required airflow distribution. Since most commercial solvers do not have an integrated optimization algorithm network, the process of generating a series of potential ventilation solutions using the conventional iterative design strategy can be time consuming. For that reason, a genetic algorithm (GA) optimization routine was developed in combination with a ventilation solver to determine the potential optimal solutions of a primary mine ventilation system based on a free splitting network. The optimization method was used in a small size mine ventilation network. The technique was shown to have the capacity to generate good feasible solutions and improve upon the manual results obtained by mine ventilation specialists. 9 refs., 7 tabs., 3 figs.

Method of removing uranium and its compounds from mine wastewaters and from aqueous solutions discharged in hydrometallurgical uranium ore treatment

International Nuclear Information System (INIS)

Jilek, R.; Prochazka, H.; Kuhr, I.; Fuska, J.; Nemec, P.; Katzer, J.

1974-01-01

The separation of uranium and its compounds from mine wastewaters and from water solutions discharged from uranium ore hydrometallurgical treatment, and its eventual simultaneous concentration in the biomass during uranium ore technological processing are described. The solutions are replenished with nutrients necessary for the growth of microorganisms, mainly with nitrogen, carbon and phosphorus and inoculated with fungi. During submersion cultivation, uranium incorporates in the mycelium, or is bound physico-chemically to the mycelium components. Together with these components, uranium is mechanically separated, i.e., by filtration, centrifugation or sedimentation. Organisms of the Fungi imperfecti class, mainly the Aspergillus and Penicillium genera are used for cultivation which may be continuous or semicontinuous. (B.S.)

Computerization of administration and operation management in Polish black coal mines

Energy Technology Data Exchange (ETDEWEB)

Mastej, R.; Syrkiewicz, J. (Centralny Osrodek Informatyki Gornictwa (Poland))

1990-08-01

Characterizes main solutions of the computerized management model adopted in Poland for the mining industry and the technical and oganizational structure of computer system application. Computer systems for black coal mines and the range of microprocessor application are shown in block diagrams. The COIG mining information center makes about 45 computer system modules with independent implementation available for black coal mines. The general concept foresees central data processing in the COIG center on the ODRA 1305 and ICL 297 computers with the G-3 operating system in the first stage and an ICL series 39 computer with the VME operating system in the second stage. For mines where no transmission lines are available local solutions based on smaller ICL computers, minicomputers or computer networks with the NOVELL network operating system or multi-access systems with the UNIX operating system are planned. 3 refs.

Removal method of radium in mine water by filter sand

International Nuclear Information System (INIS)

Taki, Tomihiro; Naganuma, Masaki

2003-01-01

Trace radium is contained in mine water from the old mine road in Ningyo-Toge Environmental Engineering Center, JNC. We observed that filter sand with hydrated manganese oxide adsorbed radium in the mine water safely for long time. The removal method of radium by filter sand cladding with hydrated manganese oxide was studied. The results showed that radium was removed continuously and last for a long time from mine water with sodium hypochlorite solution by passing through the filter sand cladding with hydrated manganese. Only sodium hypochlorite solution was used. When excess of it was added, residue chlorine was used as chlorine disinfection. Filter sand cladding with hydrated manganese on the market can remove radium in the mine water. The removal efficiency of radium is the same as the radium coprecipitation method added with barium chloride. The cost is much lower than the ordinary methods. Amount of waste decreased to about 1/20 of the coprecipitation method. (S.Y.)

Towards an evaluation framework for process mining systems

NARCIS (Netherlands)

Ailenei, I.; Rozinat, A.; Eckert, A.; Aalst, van der W.M.P.

2011-01-01

Process mining is an emerging topic in the BPM marketplace. Recently, several (commercial) software solutions have become available. Due to the lack of an evaluation framework, it is very dif¿cult for potential users to assess the strengths and weaknesses of these process mining tools. As the ¿rst

Restoration of groundwater after solution mining at the Highland Uranium Project, Wyoming, USA

Energy Technology Data Exchange (ETDEWEB)

Hunter, J. [Waste Technology Group, British Nuclear Fuels PLC, Risley, Warrington (United Kingdom); Huffman, L. [Power Resources Inc., Highland Uranium Mine, Glenrock, Wyoming (United States)

2000-07-01

The Highland Project, located in Converse County, Wyoming, has had a successful 11 year history of in-situ leach mining of Tertiary roll-front uranium deposits. The uranium ore is oxidized and solubilized by circulating native groundwater, containing additional dissolved O{sub 2} and CO{sub 2}, within confined fluvial aquifers at depths of 200 - 250 m. The changing chemistry of this groundwater during leaching is discussed, as are the various treatment techniques that have been used to restore this fluid at the end of mining. Examples are provided which demonstrate the varying effectiveness of each technique for the reduction of elevated concentrations of different groundwater parameters. The complications arising from the proximity of the earliest wellfields to abandoned, conventional mine workings, as well as unexpected side effects from each restoration method, have combined to make an interesting case history from this long established mining operation. (author)

WASTE WATER TREATMENT AND MANAGEMENT TECHNIQUES IN MINES

OpenAIRE

Navneet S. Pote*

2017-01-01

Mining industries enhance comfort of human life on one hand but this also cause pollution to air and water which are essential for survival of life. Therefore, mining and industrial activity adversely affects the ecosystem including wild life population due to deforestation, fragmentation, to habitat, air and water pollution. Eliminating the mining activities is not the solution to this problem. Hence, it is important to find the most suitable and applicable methods to reduce the pollution ca...

The effect of time-dependent ventilation and radon (thoron) gas emanation rates in underground uranium mines

International Nuclear Information System (INIS)

Bigu, J.

1987-01-01

A theoretical radiation mine model, suitable for underground uranium mines, has been investigated. In this model, the rate of ventilation and/or the radon (thoron) gas emanation from mine walls are time-dependent. Several cases of practical interest have been investigated including sinusoidal, linear, exponential, stepwise, or a combination of two or more of the above. Analytical solutions were obtained for the time-dependent radon (thoron) gas emanation rate. However, because of the extreme analytical complexity of the solutions corresponding to the time-dependent ventilation rate case, numerical solutions were found using a special Runge-Kutta procedure and the Hamming's modified predictor-corrector method for the solution of linear initial-value problems. The mine model makes provisions for losses of radioactivity, other than by ventilation and radioactive decay, by, say, plate-out on mine walls, and by other mechanisms. Radioactivity data, i.e., radon, thoron, and their progeny, obtained with the above mine model for a number of ventilation and emanation conditions, are presented. Experimental data obtained in an inactive stope of an underground uranium mine for a time-dependent air flow case are shown. Air flow conditions (ventilation rate) were determined by tracer gas techniques using SF 6

False alarms and mine seismicity: An example from the Gentry Mountain mining region, Utah

International Nuclear Information System (INIS)

Taylor, S.R.

1992-01-01

Mining regions are a cause of concern for monitoring of nuclear test ban treaties because they present the opportunity for clandestine nuclear tests (i.e. decoupled explosions). Mining operations are often characterized by high seismicity rates and can provide the cover for excavating voids for decoupling. Chemical explosions (seemingly as part of normal mining activities) can be used to complicate the signals from a simultaneous decoupled nuclear explosion. Thus, most concern about mines has dealt with the issue of missed violations to a test ban treaty. In this study, we raise the diplomatic concern of false alarms associated with mining activities. Numerous reports and papers have been published about anomalous seismicity associated with mining activities. As part of a large discrimination study in the western US (Taylor et al., 1989), we had one earthquake that was consistently classified as an explosion. The magnitude 3.5 disturbance occurred on May 14, 1981 and was conspicuous in its lack of Love waves, relative lack of high- frequency energy, low Lg/Pg ratio, and high m b - M s . A moment-tensor solution by Patton and Zandt (1991) indicated the event had a large implosional component. The event occurred in the Gentry Mountain coal mining region in the eastern Wasatch Plateau, Utah. Using a simple source representation, we modeled the event as a tabular excavation collapse that occurred as a result of normal mining activities. This study raises the importance of having a good catalogue of seismic data and information about mining activities from potential proliferant nations

Geochemical pollution as a result of ore mining in the Erzgebirge mountains - assessment and solutions

International Nuclear Information System (INIS)

Beuge, P.; Degner, T.

2000-01-01

Mining was, is and will be associated with great influences to the environment. These influences are various in form and extent. In the Ore Mountains, one of the oldest mining districts in Europe, we find a lot of problems due to the mining of various oretypes over several hundred years. The biggest problem is the water pollution by acid mine drainage, another one the enormous land use by tailing dams, pits and dumps. To appraise the degree of water or soil pollution it is necessary to use local higher background values, especially for deposit characteristic elements like arsenic or zinc. Within the mines some types of barriers occur, like the formation of secondary minerals or the precipitation of metal hydroxids. Up to 80% of the primarily mobilised metals can be retarded by these barrier systems. One of the most successful and economical ways to reduce the pollution of the environment caused by mining is to characterise and support such naturally occuring barriers. (orig.)

Impact of acid mine drainage from mining exploitations on the Margajita River basin and the Hatillo reservoir (Dominican Republic)

International Nuclear Information System (INIS)

Grandia, F.; Salas, J.; Arcos, D.; Archambault, A.; Cottard, F.

2009-01-01

Mining of the Pueblo Viejo high-sulphidation epithermal deposit (Dominican Republic) leads to environmental impact due to the formation of acid mine drainage associated with the oxidative dissolution of sulphides and sulpho salts. In addition to the very low pH, the acid waters are capable of transporting away from the mining areas high concentrations of metals and metalloids in solution. In the present work, a geochemical study of sediments deposited in the Hatillo reservoir is carried out. This reservoir is fed by the Margajita and Yuna streams which transport leachates from the Pueblo Viejo and Falcondo-Bonao (Cr-Ni) mining areas, respectively. The results show that these sediments have very high concentrations of Fe, Al and sulphate, along with significant amounts of As, Zn and Te, which are of especial environmental concern. The main contributor to this metal discharge into the reservoir is the Margajita stream, whereas the Yuna stream does not transport significant amounts of metals in solution due to its neutral pH, although it is likely that metals such as Mn, Cr, Ni and Co can be mobilised as a particulate. (Author) 5 refs.

Geological Feasibility of Underground Oil Storage in Jintan Salt Mine of China

Directory of Open Access Journals (Sweden)

Xilin Shi

2017-01-01

Full Text Available A number of large underground oil storage spaces will be constructed in deep salt mines in China in the coming years. According to the general geological survey, the first salt cavern oil storage base of China is planned to be built in Jintan salt mine. In this research, the geological feasibility of the salt mine for oil storage is identified in detail as follows. (1 The characteristics of regional structure, strata sediment, and impermeable layer distribution of Jintan salt mine were evaluated and analyzed. (2 The tightness of cap rock was evaluated in reviews of macroscopic geology and microscopic measuring. (3 According to the geological characteristics of Jintan salt mine, the specific targeted formation for building underground oil storage was chosen, and the sealing of nonsalt interlayers was evaluated. (4 Based on the sonar measuring results of the salt caverns, the characteristics of solution mining salt caverns were analyzed. In addition, the preferred way of underground oil storage construction was determined. (5 Finally, the results of closed well observation in solution mining salt caverns were assessed. The research results indicated that Jintan salt mine has the basic geological conditions for building large-scale underground oil storage.

Underground Mining Method Selection Using WPM and PROMETHEE

Science.gov (United States)

Balusa, Bhanu Chander; Singam, Jayanthu

2018-04-01

The aim of this paper is to represent the solution to the problem of selecting suitable underground mining method for the mining industry. It is achieved by using two multi-attribute decision making techniques. These two techniques are weighted product method (WPM) and preference ranking organization method for enrichment evaluation (PROMETHEE). In this paper, analytic hierarchy process is used for weight's calculation of the attributes (i.e. parameters which are used in this paper). Mining method selection depends on physical parameters, mechanical parameters, economical parameters and technical parameters. WPM and PROMETHEE techniques have the ability to consider the relationship between the parameters and mining methods. The proposed techniques give higher accuracy and faster computation capability when compared with other decision making techniques. The proposed techniques are presented to determine the effective mining method for bauxite mine. The results of these techniques are compared with methods used in the earlier research works. The results show, conventional cut and fill method is the most suitable mining method.

IT Data Mining Tool Uses in Aerospace

Science.gov (United States)

Monroe, Gilena A.; Freeman, Kenneth; Jones, Kevin L.

2012-01-01

Data mining has a broad spectrum of uses throughout the realms of aerospace and information technology. Each of these areas has useful methods for processing, distributing, and storing its corresponding data. This paper focuses on ways to leverage the data mining tools and resources used in NASA's information technology area to meet the similar data mining needs of aviation and aerospace domains. This paper details the searching, alerting, reporting, and application functionalities of the Splunk system, used by NASA's Security Operations Center (SOC), and their potential shared solutions to address aircraft and spacecraft flight and ground systems data mining requirements. This paper also touches on capacity and security requirements when addressing sizeable amounts of data across a large data infrastructure.

Possibility of applying mechanized coal mining in the mine 'Soko', with the comparative advantages of production results and impact

Directory of Open Access Journals (Sweden)

Denić Miodrag

2014-01-01

Full Text Available Mining method applied in the RMU 'Soko', is repeatedly technologically modified and reached the maximum limit in terms of productivity, level of job performance and safety at work. And all the other methods, which are in the technological process of obtaining coal rely on the technology of drilling-blasting works, in terms of the mine 'Soko', can not allow mass production of coal, regarding natural and technical-technological conditions prevailing in Sokobanja coal basin. Therefore, this paper proposes a possible solution which would enable a significant increase in annual production by appling mechanized coal mining system.

Treat mine water using passive methods

International Nuclear Information System (INIS)

Kleinmann, R.L.P.; Hedin, R.S.

1993-01-01

Passive treatment represents an alternative to conventional chemical treatment of coal mine drainage. When successful, passive systems require less investment, less maintenance and usually are less expensive than conventional chemical treatment systems. As a result, during the last seven years, more than 500 passive systems have been constructed in the United States to treat coal mine drainage. Some exist as an alternative to conventional treatment; others serve as an inexpensive pretreatment step than can decrease subsequent chemical requirements. Sulfide minerals present in rock disturbed during mining can oxidize to form an acidic metal-laden solution, commonly known as acid mine drainage (AMD). Alkalinity present in the rock may partially or completely neutralize AMD, but if either acidity or excessive metal contaminants remain, the water must be treated before it can be discharged legally. The principal regulated contaminant metals of coal mine drainage are iron and manganese. Metal mine drainage often contains more toxic metals, such as cadmium, nickel, copper and zinc. Chemical treatment of AMD is estimated to cost America's mining industry more than $1 million a day. Three principal passive technologies are used in the treatment of coal mine drainage: Aerobic wetlands, wetlands constructed with an organic substrate and anoxic limestone drains (ALDS). The selection of the technology or combination of technologies to be used depends on the quality of the water being treated

Intelligent Information Retrieval and Web Mining Architecture Using SOA

Science.gov (United States)

El-Bathy, Naser Ibrahim

2010-01-01

The study of this dissertation provides a solution to a very specific problem instance in the area of data mining, data warehousing, and service-oriented architecture in publishing and newspaper industries. The research question focuses on the integration of data mining and data warehousing. The research problem focuses on the development of…

Mine drivage in hydraulic mines

Energy Technology Data Exchange (ETDEWEB)

Ehkber, B Ya

1983-09-01

From 20 to 25% of labor cost in hydraulic coal mines falls on mine drivage. Range of mine drivage is high due to the large number of shortwalls mined by hydraulic monitors. Reducing mining cost in hydraulic mines depends on lowering drivage cost by use of new drivage systems or by increasing efficiency of drivage systems used at present. The following drivage methods used in hydraulic mines are compared: heading machines with hydraulic haulage of cut rocks and coal, hydraulic monitors with hydraulic haulage, drilling and blasting with hydraulic haulage of blasted rocks. Mining and geologic conditions which influence selection of the optimum mine drivage system are analyzed. Standardized cross sections of mine roadways driven by the 3 methods are shown in schemes. Support systems used in mine roadways are compared: timber supports, roof bolts, roof bolts with steel elements, and roadways driven in rocks without a support system. Heading machines (K-56MG, GPKG, 4PU, PK-3M) and hydraulic monitors (GMDTs-3M, 12GD-2) used for mine drivage are described. Data on mine drivage in hydraulic coal mines in the Kuzbass are discussed. From 40 to 46% of roadways are driven by heading machines with hydraulic haulage and from 12 to 15% by hydraulic monitors with hydraulic haulage.

Standard values of quality and ore mining costs in management of multi-plant mining company

Energy Technology Data Exchange (ETDEWEB)

Kudelko, Jan [KGHM CUPRUM Research and Development Center, Wroclaw (Poland); Wirth, Herbert [KGHM Polska Miedz S.A., Lubin (Poland)

2010-03-15

Profitability of copper deposit mining depends on three basic variables, electrolytic copper price, manufacturing and selling costs of copper and company property involved in production process. If the company property is adjusted to its tasks then the mining profiability depends on costs of copper mining and selling, because the price is the external variable defined by the market. We can shape the costs in two (complementary) ways, traditionally, reducing the labor, material and power consumption, and by adjusting the quality of mined ore (copper content) to the level required by the current copper prices. Required quality of copper ore in the whole company we determine according to the accepted profitability criteria and then we determine quality standard for individual mines. Algorithms determining the ore quality standard resulting from current market price of copper are presented in the paper. Calculation models for the mined ore quality standards, unit mining costs per one ton of copper, electrolytic copper production and ore output are given. Standards were established for one variable assuming that the other variables are determined in this calculation. Innovative solution, presented in the paper, is the method of decomposition of the company controllable variables into the tasks for individual mines providing reaching the targets to the whole technological circuit. Using the models, having relatively few data, it will be possible to calculate quickly the values which are interesting for managers such as for example the prognosis of rate of return (economic or operational), required copper content in the mined ore for the whole company and individual mines at given rate of return or boundary level of copper content in comparison with cost and production level. Examples of calculation are provided. (orig.)

Engineering and commissioning of a uranium mine in Brazil

International Nuclear Information System (INIS)

Moraes Barros Filho, F.V. de; Le Mailloux, Y.

1984-01-01

After a brief recital of the uranium projects in Brazil, this article describes the part played by engineering in the commissioning of the mining operations of the deposits of Pocos de Caldas, based on an evaluation of the deposit, comprising a study of the design and a comparison of the elaborated versions, a complete draft scheme for the finally chosen solution, and a participation in the check of the detailed investigations and in the erection of the plant, also in the training of the responsible section heads and finally the collaboration with Nuclebras for the starting and developing of the mining operations. The mine is then described with its specific problems, the solutions which have been evolved and the investigations which are carried on with the assistance of engineering. The following points have become clear, the multiplicity of the tasks incumbent on engineering, the necessity of training at the operator's mine qualified engineering representatives, the advantages but also the difficulties of a close cooperation of operator and engineering staff [fr

Analysis on safety production in coal mines Henan Province

Institute of Scientific and Technical Information of China (English)

KONG Liu-an; ZHANG Wen-yong

2006-01-01

Based on the rigorous situation of safety production in coal mines, the paper analyzed the statistical data of recent accidents indexes in Henan's coal mines. Using investigation and comparison analysis methods, a specified analysis on mining conditions, technical facility level, safety input and vocational quality of workers in Henan's coal mines was conducted. The result indicates that there have been existing such main safety production problems as weak safety management, low-level facilities, inadequate safety input and poor vocational quality and so on. Finally it proposes such reference solutions as to establish and perfect coal mining supervision and management system, to increase safety investment into techniques and facilities and to strengthen workers' safety education and introduction of more high-level professional talents.

New force or model-dependent effect in the mine gravity measurements?

International Nuclear Information System (INIS)

Kim, Y.E.; Klepacki, D.J.; Hinze, W.J.

1987-01-01

The exact solution for the oblate spheroidal layer model of the earth is applied to recent gravity data measured at the Hilton mine, Mount Isa, Queensland. We find that our extracted values of the gravitational constant from the Hilton mine data are consistent with the laboratory value within the accuracy of the mass density profile determination made at the Hilton mine and the surrounding area. (orig.)

Lowering resistance of the Hoyle Pond Mine

Energy Technology Data Exchange (ETDEWEB)

Desjardins, M. [Goldcorp Canada Ltd., Porcupine Gold Mines, Hoyle Pond Mine, Timmins, ON (Canada)

2010-07-01

The Hoyle Pond underground mine is located in the Porcupine Gold Camp, east of Timmins, Ontario. Various mining methods are used to excavate the gold, each with different ventilation requirements in terms of layout and volume. The mine was originally designed as a shallow mine but is planning to reach a depth of 2500 m. This paper described the events that lead to the high system pressures encountered at the mine, and the measures taken to reduce them. New surface fans and a new fresh air raise (FAR) were commissioned in 2005. The old FAR had to be sealed as soon as the new fans were in place in order to prevent short-circuiting. As a result, the mine resistance curve steepened considerably. The total pressure at the fan increased from 1500 Pa to 3000 Pa. As such, only 1 surface fan could operate at any give time, providing only half the possible volume of air. The challenge was to reduce the mine's resistance while getting the desired volume of air down to to the mining faces at depth. The solutions were to install booster fans and initiate a raise-bore program that would link the 450 m level to 900 m level. These measures twinned the existing fresh air circuit and resulted in a lowering of the overall mine resistance curve. 1 ref., 9 figs.

Mining and environment

International Nuclear Information System (INIS)

Pimiento, Elkin Vargas

1998-01-01

In order to obtain the best social and environmental results from mining activities, different solutions, which involve a variety of perspectives, have been proposed. These include the worldwide perspective based in the economy globalization paradigms; the regional perspective, focused in the integration of countries; the national perspective, which emphasizes the natural assets and development options, and finally a local perspective is incorporated to account for the participation of directly affected communities. Within this framework, the mining industry is requested to develop both technological and managerial tools appropriate to evaluate, optimize and communicate the social and environmental performance and output of its related activities, mainly in the developing countries. On the other hand, the governments have been committed to implement regulatory actions, of command and control type, based on an environmental legislation in line with the above mentioned perspectives and also to use economical instruments as a mean to accomplish environmental objectives. In Colombia the direct regulation methods have been traditionally used to prevent the environmental deterioration produced by mining activities, however, since the 1991 political constitution and the law 99 of 1993, the communities' participation and economical instruments were incorporated. A historic summary of the environmental legislation in our country from the early 70's up to now, showing its implications in mining is presented. Then a favorable tendency is indicated in the environmental improvement of the national extractive industry, accomplished as a result of the implementation of new strategies to minimize the impact of mining on the environment and to improve the well being of local communities

Data mining concepts, methods and applications in management and engineering design

CERN Document Server

Yin, Yong; Tang, Jiafu; Zhu, JianMing

2011-01-01

Data Mining introduces in clear and simple ways how to use existing data mining methods to obtain effective solutions for a variety of management and engineering design problems. Data Mining is organised into two parts: the first provides a focused introduction to data mining and the second goes into greater depth on subjects such as customer analysis. It covers almost all managerial activities of a company, including: * supply chain design, * product development, * manufacturing system design, * product quality control, and * preservation of privacy. Incorporating recent developments of data

Mining Pribram in science and technology. Proceedings of Session N

International Nuclear Information System (INIS)

1990-01-01

The proceedings contain 50 papers of which 15 have been inputted in INIS. They concern uranium ore leaching, leaching field designing, leaching process optimization, pressure leaching in autoclaves, obtaining zirconium compounds, scandium, rhenium and other elements as by-products in uranium mining, methods of waste solution and gas processing, reclamation of mined areas, experimental studies of interaction of other ores with leaching solutions, methods of processing uranium ores with increased arsenic content, and increasing corrosion resistance of reinforced concrete structures by the action of electric current. (M.D.). 36 figs., 16 tabs., 47 refs

Techniques to correct and prevent acid mine drainage: A review

OpenAIRE

Pozo-Antonio, Santiago; Puente-Luna, Iván; Lagüela-López, Susana; Veiga-Ríos, María

2014-01-01

Acid mine drainage (AMD) from mining wastes is one of the current environmental problems in the field of mining pollution that requires most action measures. This term describes the drainage generated by natural oxidation of sulfide minerals when they are exposed to the combined action of water and atmospheric oxygen. AMD is characterized by acidic effluents with a high content of sulfate and heavy metal ions in solution, which can contaminate both groundwater and surface water. Minerals resp...

The Bitcoin Mining Game

Directory of Open Access Journals (Sweden)

Nicolas Houy

2016-12-01

Full Text Available This article deals with the mining incentives in the Bitcoin protocol. The mining process is used to confirm and secure transactions. This process is organized as a speed game between individuals or firms – the miners – with different computational powers to solve a mathematical problem, bring a proof of work, spread their solution and reach consensus among the Bitcoin network nodes with it. First, we define and specify this game. Second, we analytically find its Nash equilibria in the two-player case. We analyze the parameters for which the miners would face the proper incentives to fulfill their function of transaction processors in the current situation. Finally, we study the block space market offer.

Analysis of post-blasting source mechanisms of mining-induced seismic events in Rudna copper mine, Poland

Directory of Open Access Journals (Sweden)

Caputa Alicja

2015-10-01

Full Text Available The exploitation of georesources by underground mining can be responsible for seismic activity in areas considered aseismic. Since strong seismic events are connected with rockburst hazard, it is a continuous requirement to reduce seismic risk. One of the most effective methods to do so is blasting in potentially hazardous mining panels. In this way, small to moderate tremors are provoked and stress accumulation is substantially reduced. In this paper we present an analysis of post-blasting events using Full Moment Tensor (MT inversion at the Rudna mine, Poland, underground seismic network. In addition, we describe the problems we faced when analyzing seismic signals. Our studies show that focal mechanisms for events that occurred after blasts exhibit common features in the MT solution. The strong isotropic and small Double Couple (DC component of the MT, indicate that these events were provoked by detonations. On the other hand, post-blasting MT is considerably different than the MT obtained for strong mining events. We believe that seismological analysis of provoked and unprovoked events can be a very useful tool in confirming the effectiveness of blasting in seismic hazard reduction in mining areas.

Geotechnical design of underground slate mines

International Nuclear Information System (INIS)

Iglesias Comesaña, C.; Taboada Castro, J.; Arzúa Touriño, J.; Giráldez Pérez, E.; Martín Suárez, J.M.

2017-01-01

Slate is one of the most important natural materials in Spain, with a potent extractive and processing industry concentrated in the autonomous communities of Galicia, Castile and León. Thanks to its resistance to external agents, its impermeability and its excellent cleavability, slate is used as for roofing and tiling. Almost all the active exploitations in our country where this resource is extracted are open pit mines, where the exploitation ratios have nearly reached their economic limit, making it necessary to look for alternatives that will allow the mining works to be continued. Underground mining is a solution that offers low exploitation ratios, with low spoil generation. The room-and-pillar method with barrier pillars is usually applied for the exploitation of slate deposits. There are several factors to be taken into account when designing a mine (economic, logistical, geotechnical, technical, environmental…), especially for an underground mine. This study focuses on the geotechnical design process of a room-and-pillar underground mine, based on the tributary area theory, the analysis of the tensions in the ground with numerical methods and the choice of an appropriate reinforcement in view of the expected instabilities. This explanation is completed with an example of a design that includes the estimate exploitation rates and production. [es

Mining and mining authorities in Saarland 2016. Mining economy, mining technology, occupational safety, environmental protection, statistics, mining authority activities. Annual report

International Nuclear Information System (INIS)

2016-01-01

The annual report of the Saarland Upper Mining Authority provides an insight into the activities of mining authorities. Especially, the development of the black coal mining, safety and technology of mining as well as the correlation between mining and environment are stressed.

Problems and solutions of reliability issues for external power supply in the coal mines

Directory of Open Access Journals (Sweden)

И. Ю. Семыкина

2017-08-01

Full Text Available Restructuring of the energy sector  and liberalization of the electricity market resulted in separation of a single industry into a multitude of generating companies, federal and interregional distribution utilities, regional power providers and energy suppliers. For a number of reasons, related to the process of managing separate companies, faults in the laws and regulations, and unsatisfactory technical state of the energy equipment both on the part of distributors and consumers, reliability of energy supply faces increasing negative trends, which potentially can lead to big problems. Up to this day the energy sector does not have a developed database on the state of equipment and results of its maintenance, nor has it defined criteria to actually assess technical conditions of the equipment. The authors propose to develop and implement a mechanism aimed at technical auditing and monitoring of the engineering state of external power supply system, whose results can help in the development of more efficient and economically sound measures to improve reliability of energy supply. In recent years, a lot of attention has been paid to the issues of enhanced security of industrial power supply. However, specific characteristics of underground coal mining and enormous work load of the production process limit the applicability of developed methods and algorithms. Existing research does not address economic issues of reliable energy supply, either direct (economic damage from power interruptions, contractual security of supply, tariff regulation or indirect (charges for utility connection with a required level of reliability. There is no explicit definition for the term «autonomous energy source», nor is there a list of power receivers falling into the first and «special» categories according to their reliability. The paper contains a range of urgent problems and solutions that will increase reliability of external power supply in the coal mines.

In-situ leach mining: the next quantum leap?

International Nuclear Information System (INIS)

Hancock, S.

1988-01-01

The opportunities and problems which in-situ leach mining technology presents to the mining industry are considered. These are exemplified by concerns addressed in the development of a proposal to mine uranium by in-situ leach techniques at Beverley in South Australia. The technique proposed at Beverley will use sulphuric acid with hydrogen peroxide or dissolved oxygen as the lixivient. Pre-treatment of the aquifer will be necessary to remove excess calcium carbonate, and the system will employ a slightly overpumped output of fluid through the wellfield to reduce the risk of excursions of mining solutions. The input and output patterns will also be varied to take account of the hydrogeological conditions such as confining bed thickness and permeability. Much study has been directed towards the post mining condition of the ore zone and the threat it may pose to the water resources of the region. 10 refs., 1 fig

Main trends in scientific-research works during construction and operation of uranium mines and open cuts

International Nuclear Information System (INIS)

Mosinets, V.N.

1993-01-01

Consideration is given to main trends in research works during construction and operation of uranium mines and open cuts of Priargunsky mine-chemical association. Develops and introduced principally new design solutions and technologies in the field of open mining, underground mining, as well as in-situ and heap leaching, are described

Retrofit SCR system for NOx control from heavy-duty mining equipment

International Nuclear Information System (INIS)

Mannan, M.A.

2009-01-01

Diesel engines are used extensively in the mining industry and offer many advantages. However, particulate matter (PM) emissions and nitrogen oxide emissions (NOx) are among its disadvantages. A significant concern related to PM and NOx in an underground mine involves the use of diesel exhaust after treatment systems such as diesel particulate filters and selective catalytic reduction (SCR). This presentation discussed NOx and PM control and provided a description of an SCR system and examples of SCR retrofits. Options for NOx control were discussed and a case study involving the installation of an SCR retrofit system in an underground mine operated by Sifto Salt was also presented. The purpose of the case study was to identify cost effective retrofit solutions to lower nitrogen dioxide emissions from heavy-duty trucks operating in underground mines. The case study illustrated and presented the candidate vehicle, baseline emissions, a BlueMax SCR retrofit solution, and BlueMax installation. 1 tab., 6 figs.

Intelligent Mining Engineering Systems in the Structure of Industry 4.0

OpenAIRE

Rylnikova Marina; Radchenko Dmitriy; Klebanov Dmitriy

2017-01-01

The solution of the problem of improving the human environment and working conditions at mines is based on the provision of the rationale of parameters and conditions for the implementation of an environmentally balanced cycle of comprehensive development of mineral deposits on the basis of the design of mining engineering systems characterized by the minimization of the human factor effect in danger zones of mining operations. In this area, robotized technologies are being developed, machine...

Mining aspects of hard to access oil sands deposits

Energy Technology Data Exchange (ETDEWEB)

Stephenson, G.; Wright, D.; Lukacs, Z. [Norwest Corp., Calgary, AB (Canada)

2006-07-01

While a variety of oil sands mining technologies have been explored since the 1960s, the oil sands industry has generally favoured truck and shovel mining as a proven, low-cost mining solution. However, surface mining economics are affected by the price of bitumen, haul distances, tailings storage and geotechnical constraints. Maintenance, labour and the cost of replacing tires and ground engaging tools also have a significant impact on the economics of surface mining. Large volumes of water are used in surface mining, and remediation of surface mined areas can take hundreds of years. Damage to machinery is common as oil sands are abrasive and adhere to equipment. This presentation examined recent technologies developed to improve the economics of surface mining. Various extraction and tailings technologies were reviewed. Issues concerning the integration of mining and extraction processes were discussed. Various monitoring tools were evaluated. A review of new underground mining options included outlines of: longwall mining; sub-level caving; tunnel boring; and room and pillar extraction techniques. A generalized regional geology was presented. It was concluded that the oil sands surfacing mining industry should concentrate on near-term research needs to improve the performance and economics of proven technologies. Screening studies should also be conducted to determine the focus for the development of underground technologies. refs., tabs., figs.

Post-mining in Walloon region

International Nuclear Information System (INIS)

Arnould, R.; Delbeuck, C.; Flamion, B.

2003-01-01

several studies are presently undertaken in the Walloon Region so as to assess the long term environmental impact caused by the shutting down of coal mines and their pumping operations. In many locations, new problems are encountered, such as sudden underground water appearance at hill slopes, coal heaps instability or flooding of underground cellars. Slope instability increase risks. The main goals of the presented studies are to suppress or at least to limit those risks and inconveniences and propose solutions to be implemented in the framework of the existing dewatering facilities built by the Walloon Region and local authorities in mines induced subsidence areas. (authors)

The passivation of calcite by acid mine water. Column experiments with ferric sulfate and ferric chloride solutions at pH 2

Energy Technology Data Exchange (ETDEWEB)

Soler, Josep M. [Institute of Earth Sciences ' Jaume Almera' (CSIC), Lluis Sole i Sabaris s/n, 08028 Barcelona, Catalonia (Spain); Institute of Environmental Assessment and Water Research (CSIC), Jordi Girona 18, 08034 Barcelona, Catalonia (Spain)], E-mail: jsoler@ija.csic.es; Boi, Marco [Institute of Earth Sciences ' Jaume Almera' (CSIC), Lluis Sole i Sabaris s/n, 08028 Barcelona, Catalonia (Spain); Institute of Environmental Assessment and Water Research (CSIC), Jordi Girona 18, 08034 Barcelona, Catalonia (Spain); Mogollon, Jose Luis [Institute of Earth Sciences ' Jaume Almera' (CSIC), Lluis Sole i Sabaris s/n, 08028 Barcelona, Catalonia (Spain); Instituto de Ciencias de la Tierra, Universidad Central de Venezuela, Caracas 1020-A (Venezuela, Bolivarian Republic of); Cama, Jordi; Ayora, Carlos [Institute of Earth Sciences ' Jaume Almera' (CSIC), Lluis Sole i Sabaris s/n, 08028 Barcelona, Catalonia (Spain); Institute of Environmental Assessment and Water Research (CSIC), Jordi Girona 18, 08034 Barcelona, Catalonia (Spain); Nico, Peter S.; Tamura, Nobumichi; Kunz, Martin [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States)

2008-12-15

Column experiments, simulating the behavior of passive treatment systems for acid mine drainage, have been performed. Acid solutions (HCl or H{sub 2}SO{sub 4}, pH 2), with initial concentrations of Fe(III) ranging from 250 to 1500 mg L{sup -1}, were injected into column reactors packed with calcite grains at a constant flow rate. The composition of the solutions was monitored during the experiments. At the end of the experiments (passivation of the columns), the composition and structure of the solids were measured. The dissolution of calcite in the columns caused an increase in pH and the release of Ca into the solution, leading to the precipitation of gypsum and Fe-oxyhydroxysulfates (Fe(III)-SO{sub 4}-H{sup +} solutions) or Fe-oxyhydroxychlorides (Fe(III)-Cl-H{sup +} solutions). The columns worked as an efficient barrier for some time, increasing the pH of the circulating solutions from 2 to {approx}6-7 and removing its metal content. However, after some time (several weeks, depending on the conditions), the columns became chemically inert. The results showed that passivation time increased with decreasing anion and metal content of the solutions. Gypsum was the phase responsible for the passivation of calcite in the experiments with Fe(III)-SO{sub 4}-H{sup +} solutions. Schwertmannite and goethite appeared as the Fe(III) secondary phases in those experiments. Akaganeite was the phase responsible for the passivation of the system in the experiments with Fe(III)-Cl-H{sup +} solutions.

Mining Product Data Models: A Case Study

Directory of Open Access Journals (Sweden)

Cristina-Claudia DOLEAN

2014-01-01

Full Text Available This paper presents two case studies used to prove the validity of some data-flow mining algorithms. We proposed the data-flow mining algorithms because most part of mining algorithms focuses on the control-flow perspective. First case study uses event logs generated by an ERP system (Navision after we set several trackers on the data elements needed in the process analyzed; while the second case study uses the event logs generated by YAWL system. We offered a general solution of data-flow model extraction from different data sources. In order to apply the data-flow mining algorithms the event logs must comply a certain format (using InputOutput extension. But to respect this format, a set of conversion tools is needed. We depicted the conversion tools used and how we got the data-flow models. Moreover, the data-flow model is compared to the control-flow model.

Metal Separations and Recovery in the Mining Industry

Science.gov (United States)

Izatt, Steven R.; Bruening, Ronald L.; Izatt, Neil E.

2012-11-01

Molecular Recognition Technology (MRT) plays an important role in the hydrometallurgical processing dissolved entities in solutions in the mining industry. The status of this industry with respect to sustainability and environmental issues is presented and discussed. The roles of MRT and ion exchange in metal separation and recovery processes in the mining industry are discussed and evaluated. Examples of MRT separation processes of interest to the mining community are given involving gold, cobalt purification by extraction of trace cadmium, rhenium, and platinum group metals (PGMs). MRT processes are shown to be sustainable, economically viable, energy efficient, and environmentally friendly, and to have a low carbon footprint.

Opportunities and Challenges in Deep Mining: A Brief Review

Directory of Open Access Journals (Sweden)

Pathegama G. Ranjith

2017-08-01

Full Text Available Mineral consumption is increasing rapidly as more consumers enter the market for minerals and as the global standard of living increases. As a result, underground mining continues to progress to deeper levels in order to tackle the mineral supply crisis in the 21st century. However, deep mining occurs in a very technical and challenging environment, in which significant innovative solutions and best practice are required and additional safety standards must be implemented in order to overcome the challenges and reap huge economic gains. These challenges include the catastrophic events that are often met in deep mining engineering: rockbursts, gas outbursts, high in situ and redistributed stresses, large deformation, squeezing and creeping rocks, and high temperature. This review paper presents the current global status of deep mining and highlights some of the newest technological achievements and opportunities associated with rock mechanics and geotechnical engineering in deep mining. Of the various technical achievements, unmanned working-faces and unmanned mines based on fully automated mining and mineral extraction processes have become important fields in the 21st century.

Integrating Data Mining Techniques into Telemedicine Systems

Directory of Open Access Journals (Sweden)

Mihaela GHEORGHE

2014-01-01

Full Text Available The medical system is facing a wide range of challenges nowadays due to changes that are taking place in the global healthcare systems. These challenges are represented mostly by economic constraints (spiraling costs, financial issues, but also, by the increased emphasis on accountability and transparency, changes that were made in the education field, the fact that the biomedical research keeps growing in what concerns the complexities of the specific studies etc. Also the new partnerships that were made in medical care systems and the great advances in IT industry suggest that a predominant paradigm shift is occurring. This needs a focus on interaction, collaboration and increased sharing of information and knowledge, all of these may is in turn be leading healthcare organizations to embrace the techniques of data mining in order to create and sustain optimal healthcare outcomes. Data mining is a domain of great importance nowadays as it provides advanced data analysis techniques for extracting the knowledge from the huge volumes of data collected and stored by every system of a daily basis. In the healthcare organizations data mining can provide valuable information for patient's diagnosis and treatment planning, customer relationship management, organization resources management or fraud detection. In this article we focus on describing the importance of data mining techniques and systems for healthcare organizations with a focus on developing and implementing telemedicine solution in order to improve the healthcare services provided to the patients. We provide architecture for integrating data mining techniques into telemedicine systems and also offer an overview on understanding and improving the implemented solution by using Business Process Management methods.

Mine Water Treatment in Hongai Coal Mines

Science.gov (United States)

Dang, Phuong Thao; Dang, Vu Chi

2018-03-01

Acid mine drainage (AMD) is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine drainage treatment in Hongai coal mines. In addition, selection and criteria for the design of the treatment systems have been presented.

Mine Water Treatment in Hongai Coal Mines

OpenAIRE

Dang Phuong Thao; Dang Vu Chi

2018-01-01

Acid mine drainage (AMD) is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine ...

Coal mine reclamation: the cooperative approach

Energy Technology Data Exchange (ETDEWEB)

Blazenko, E J; Kuhn, J A

1976-07-01

Salient problems encountered in coal mine reclamation include land use and environmental protection values, license applications and subsequent reports, and the development of sound reclamation planning programs. The facts of life to be dealt with in reclamation and reclamation planning include encounters with negative attitudes toward reclamation, basic physics, chemistry, biology and geology, and the ability or inability to respond properly. The cooperative approach to reclamation includes interfacing with mining company personnel, government agencies, public-interest groups and consultants. Some promising solutions to reclamation, especially in alpine and subalpine regions, include handling of materials and organic test plot research.

2nd Essen specialized discussions about repository mining

International Nuclear Information System (INIS)

Reinartz, Jerome

2013-01-01

The final storage of nuclear waste in Germany right now is more a political and societal than technical process. To promote the exchange of experience in the sophisticated field of mining technology, and put the focus back on finding a repository solution, the DMT in cooperation with GNS and DBE Technology initiated the Essen Specialized Discussions about Repository Mining. On February 28, more than 120 participants sought information about recent developments, exchanged experience, and maintained contacts. (orig.)

An Experimental Evaluation of the Weathering Effects on Mine Shaft Lining Materials

Directory of Open Access Journals (Sweden)

W. Yang

2017-01-01

Full Text Available Many shaft collapses are related to the deterioration and failure of the masonry shaft lining materials. In modern mine shaft, concrete is widely used to provide support. To analyse shafts stability, the properties of the lining need to be well defined. The behaviour of masonry and concrete can be considerably affected by long-term exposure to harsh mine water. This paper presents a study which focuses on the weathering effects of mine water on lining materials (brick, mortar, and concrete. To reproduce the weathering process, samples were placed into solutions of potable water, artificial mine water, and a more aggressive mine-water solution for just less than one year. Four phases of laboratory tests were conducted throughout the time period to assess the degradation of mechanical properties of the lining materials. Particular attention is given to the degradation of material strength and stiffness. Results indicate that the harsh acidic mine water has pronounced detrimental effects on the strength and stiffness of mortar. The weathering process is shown to have the most significant effect on the stiffness of concrete and mortar. It is also shown that the use of mass loss as an index for evaluation of mechanical properties may not be appropriate.

Mine Water Treatment in Hongai Coal Mines

Directory of Open Access Journals (Sweden)

Dang Phuong Thao

2018-01-01

Full Text Available Acid mine drainage (AMD is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine drainage treatment in Hongai coal mines. In addition, selection and criteria for the design of the treatment systems have been presented.

Ion activity and distribution of heavy metals in acid mine drainage polluted subtropical soils

International Nuclear Information System (INIS)

Li Yongtao; Becquer, Thierry; Dai Jun; Quantin, Cecile; Benedetti, Marc F.

2009-01-01

The oxidative dissolution of mine wastes gives rise to acidic, metal-enriched mine drainage (AMD) and has typically posed an additional risk to the environment. The poly-metallic mine Dabaoshan in South China is an excellent test site to understand the processes affecting the surrounding polluted agricultural fields. Our objectives were firstly to investigate metal ion activity in soil solution, distribution in solid constituents, and spatial distribution in samples, secondly to determine dominant environment factors controlling metal activity in the long-term AMD-polluted subtropical soils. Soil Column Donnan Membrane Technology (SC-DMT) combined with sequential extraction shows that unusually large proportion of the metal ions are present as free ion in the soil solutions. The narrow range of low pH values prevents any pH effects during the binding onto oxides or organic matter. The differences in speciation of the soil solutions may explain the different soil degradation observed between paddy and non-paddy soils. - First evidence of the real free metal ion concentrations in acid mine drainage context in tropical systems

On-Site Radon Detection of Mining-induced Fractures from Overlying Strata to the Surface: A Case Study of the Baoshan Coal Mine in China

Directory of Open Access Journals (Sweden)

Wei Zhang

2014-12-01

Full Text Available Large-scale longwall mining of shallow coal seams may cause mining-induced fractures that can project completely through to the surface. This could lead to a series of mine safety and environmental issues, further deteriorating the already fragile ecological environment in the Western mining areas in China. Therefore, an accurate and effective understanding of the spatiotemporal evolution law of mining-induced fractures in overlying strata and its relationship to upper aquifers is critical. In this paper, the application of the geophysical-chemical properties of radon in mining engineering is explored as a potential solution to the shortcomings of existing surveying methods. A radioactive measurement method is proposed for the detection of the development of mining-induced fractures from overlying strata to the surface in the Baoshan Coal Mine (BCM. The on-site test indicated that the first weighting step is approximately 60 m, the average periodic weighting step is approximately 20 m, and the influence coverage of the advanced abutment pressure is approximately 30 m. The presented method could be used as an indirect technical support to increase the safety of coal mining by acting as a simple, fast, and reliable method of detecting mining-induced fractures in overlying strata.

False alarms and mine seismicity: An example from the Gentry Mountain mining region, Utah. Los Alamos Source Region Project

Energy Technology Data Exchange (ETDEWEB)

Taylor, S.R.

1992-09-23

Mining regions are a cause of concern for monitoring of nuclear test ban treaties because they present the opportunity for clandestine nuclear tests (i.e. decoupled explosions). Mining operations are often characterized by high seismicity rates and can provide the cover for excavating voids for decoupling. Chemical explosions (seemingly as part of normal mining activities) can be used to complicate the signals from a simultaneous decoupled nuclear explosion. Thus, most concern about mines has dealt with the issue of missed violations to a test ban treaty. In this study, we raise the diplomatic concern of false alarms associated with mining activities. Numerous reports and papers have been published about anomalous seismicity associated with mining activities. As part of a large discrimination study in the western US (Taylor et al., 1989), we had one earthquake that was consistently classified as an explosion. The magnitude 3.5 disturbance occurred on May 14, 1981 and was conspicuous in its lack of Love waves, relative lack of high- frequency energy, low Lg/Pg ratio, and high m{sub b} {minus} M{sub s}. A moment-tensor solution by Patton and Zandt (1991) indicated the event had a large implosional component. The event occurred in the Gentry Mountain coal mining region in the eastern Wasatch Plateau, Utah. Using a simple source representation, we modeled the event as a tabular excavation collapse that occurred as a result of normal mining activities. This study raises the importance of having a good catalogue of seismic data and information about mining activities from potential proliferant nations.

Optimal sampling strategy for data mining

International Nuclear Information System (INIS)

Ghaffar, A.; Shahbaz, M.; Mahmood, W.

2013-01-01

Latest technology like Internet, corporate intranets, data warehouses, ERP's, satellites, digital sensors, embedded systems, mobiles networks all are generating such a massive amount of data that it is getting very difficult to analyze and understand all these data, even using data mining tools. Huge datasets are becoming a difficult challenge for classification algorithms. With increasing amounts of data, data mining algorithms are getting slower and analysis is getting less interactive. Sampling can be a solution. Using a fraction of computing resources, Sampling can often provide same level of accuracy. The process of sampling requires much care because there are many factors involved in the determination of correct sample size. The approach proposed in this paper tries to find a solution to this problem. Based on a statistical formula, after setting some parameters, it returns a sample size called s ufficient sample size , which is then selected through probability sampling. Results indicate the usefulness of this technique in coping with the problem of huge datasets. (author)

Mine dewatering and impact assessment in an arid area: Case of Gulf region.

Science.gov (United States)

Yihdego, Yohannes; Drury, Len

2016-11-01

Analytical and empirical solution coupled with water balance method were used to predict the ground water inflow to a mine pit excavated below the water table, final pit lake level/recovery and radius of influence, through long-term and time variant simulations. The solution considers the effect of decreased saturated thickness near the pit walls, distributed recharge to the water table and upward flow through the pit bottom. The approach is flexible to accommodate the anisotropy/heterogeneity of the real world. Final pit void water level was assessed through scenarios to know whether it will be consumed by evaporation and a shallow lake will form or not. The optimised radius of influence was estimated which is considered as crucial information in relation to the engineering aspects of mine planning and sustainable development of the mine area. Time-transient inflow over a period of time was estimated using solutions, including analytical element method (AEM). Their primary value is in providing estimates of pit inflow rates to be used in the mine dewatering. Inflow estimation and recovery helps whether there is water to supplement the demand and if there is any recovery issue to be dealt with in relation to surface and groundwater quality/eco-system, environmental evaluations and mitigation. Therefore, this method is good at informing decision makers in assessing the effects of mining operations and developing an appropriate water management strategy.

Optimized mine ventilation on demand (OMVOD)

International Nuclear Information System (INIS)

Anderson, M.

2009-01-01

This paper provided an overview of the Optimized Mine Ventilation on Demand (OMVOD) system that is being installed at Xstrata Nickel Rim South Project and at Vale Inco's Totten Mine in Sudbury. The OMVOD system is designed to dynamically monitor and control air quality and quantity in real time and dilute and remove hazardous substances including diesel particulate matter (DPM), carbon monoxide (CO) and nitrous oxide (NO 2 ). It is also designed to control the thermal environment and provide ventilation for humans as well as mobile equipment engine combustion according to regulatory standards. The paper highlighted the OMVOD system optimization of energy, air quality measurement and control and production management of the mines through real time dynamic automation. Topics of discussion included real-time tracking and monitoring of diesel equipment; real-time tracking of underground miners; real-time evaluation of mine ventilation networks; and real-time control and optimization of ventilation equipment. ABB and Simsmart Technologies have joined forces to provide underground mining customers with a ventilation optimization solution. Simsmart's OMVOD provides proven real time/dynamic automation technology to significantly reduce energy costs, provide health and safety benefits as well as major capital cost savings while realizing an increase in production.

Mining with microbes

International Nuclear Information System (INIS)

Rawlings., D.E.; Silver, S.

1995-01-01

Microbes are playing increasingly important roles in commercial mining operations, where they are being used in the open-quotes bioleachingclose quotes of copper, uranium, and gold ores. Direct leaching is when microbial metabolism changes the redox state of the metal being harvested, rendering it more soluble. Indirect leaching includes redox chemistry of other metal cations that are then coupled in chemical oxidation or reduction of the harvested metal ion and microbial attack upon and solubilization of the mineral matrix in which the metal is physically embedded. In addition, bacterial cells are used to detoxify the waste cyanide solution from gold-mining operations and as open-quotes absorbantsclose quotes of the mineral cations. Bacterial cells may replace activated carbon or alternative biomass. With an increasing understanding of microbial physiology, biochemistry and molecular genetics, rational approaches to improving these microbial activities become possible. 40 refs., 3 figs

IBM SPSS modeler essentials effective techniques for building powerful data mining and predictive analytics solutions

CERN Document Server

McCormick, Keith; Wei, Bowen

2017-01-01

IBM SPSS Modeler allows quick, efficient predictive analytics and insight building from your data, and is a popularly used data mining tool. This book will guide you through the data mining process, and presents relevant statistical methods which are used to build predictive models and conduct other analytic tasks using IBM SPSS Modeler. From ...

Treatment of the acid mine drainage residue for uranium recovery

International Nuclear Information System (INIS)

Dias, M.M.; Horta, D.G.; Fukuma, H.T.; Villegas, R.A.S.; Carvalho, C.H.T. de; Silva, A.C. da

2017-01-01

Acid mine drainage (AMD) is a process that occurs in many mining that have sulfide ores. With water and oxygen, several metals are oxidized, one example being uranium. At the mine pit of the Osamu Utsumi Mine located at INB - Caldas and in two other boot-wastes (mining waste pile), AMD is present and currently, without a technological solution. The acidic water present in the pit is treated with hydrated lime, generating water for disposal and an alkaline residue called calcium diuranate - DUCA. The DUCA has a concentration of approximately 0.32% U 3 O 8 , which makes interesting the development of a process for extracting that metal. One of the processes that can be used is leaching. For this study, it was decided to evaluate the alkaline leaching to extract the uranium present in the residue. It is necessary to optimize operational parameters for the process: percentage of solids, concentration of leaching agent in solution, temperature and reaction time. With these parameters, it is possible to improve the leaching so that the largest amount of uranium is extracted from the sample, to help solve the environmental impact caused by the wastewater from the treatment of acid waters and, in addition, to give an economical destination for this metal that is contained in the deposited DUCA

An intelligent hybrid system for surface coal mine safety analysis

Energy Technology Data Exchange (ETDEWEB)

Lilic, N.; Obradovic, I.; Cvjetic, A. [University of Belgrade, Belgrade (Serbia)

2010-06-15

Analysis of safety in surface coal mines represents a very complex process. Published studies on mine safety analysis are usually based on research related to accidents statistics and hazard identification with risk assessment within the mining industry. Discussion in this paper is focused on the application of AI methods in the analysis of safety in mining environment. Complexity of the subject matter requires a high level of expert knowledge and great experience. The solution was found in the creation of a hybrid system PROTECTOR, whose knowledge base represents a formalization of the expert knowledge in the mine safety field. The main goal of the system is the estimation of mining environment as one of the significant components of general safety state in a mine. This global goal is subdivided into a hierarchical structure of subgoals where each subgoal can be viewed as the estimation of a set of parameters (gas, dust, climate, noise, vibration, illumination, geotechnical hazard) which determine the general mine safety state and category of hazard in mining environment. Both the hybrid nature of the system and the possibilities it offers are illustrated through a case study using field data related to an existing Serbian surface coal mine.

Hydrogeologic and stratigraphic data pertinent to uranium mining, Cheyenne Basin, Colorado. Information series 12

International Nuclear Information System (INIS)

Kirkham, R.M.; O'Leary, W.; Warner, J.W.

1980-01-01

Recoverable low-grade uranium deposits occur in the Upper Cretaceous Fox Hills Sandstone and Laramie Formation in the Cheyenne Basin, Colorado. One of these deposits, the Grover deposit, has been test mined on a pilot scale using in-situ solution-mining techniques. A second deposit, the Keota deposit, is currently being licensed and will produce about 500,000 lb/yr (227,000 kg/yr) of yellowcake also using in-situ solution-mining techniques. Other uranium deposits exist in this area and will also probably be solution mined, although open-pit mining may possibly be employed at a few locations in the Cheyenne Basin. One of the principal environmental impacts of this uranium-mining activity is the potential effect on ground-water quality and quantity. In order to fully assess potential ground-water impacts, regulatory agencies and mine planners and operators must be familiar with regional geologic and hydrologic characteristics of the basin. The Oligocene White River Group and Upper Cretaceous Laramie Formation, Fox Hills Sandstone, and Pierre Shale contain important aquifers which supply water for domestic, stock-watering, irrigation, and municipal purposes in the study area. Should uranium mining seriously impact shallower aquifers, the upper Pierre and lower Fox Hills aquifers may become important sources of water. Water samples collected and analyzed from over 100 wells during this investigation provide baseline water-quality data for much of the study area. These analyses indicate water quality is highly variable not only between aquifers, but also within a particular aquifer. Many of the wells yield water that exceeds US Public Health drinking water standards for pH, TDS, sulfate, manganese, iron and selenium. Uranium, molybdenum, and vanadium concentrations are also high in many of these wells. 8 figures

Environmental considerations. Environmental impacts of uranium mining in South Texas

International Nuclear Information System (INIS)

Kallus, M.F.

1977-01-01

Recent investigations of uranium mining and milling activities in the Grants Mineral Belt of New Mexico revealed serious environmental problems associated with these activities. An investigation was undertaken in the South Texas Uranium Belt to determine whether or not similar or other environmental problems existed. The study describes: (1) the history of uranium mining and milling in South Texas, (2) the area economy and demography, (3) the occurrence of uranium ore and (4) the regulatory aspects of uranium mining and milling in South Texas. The commercial recovery and processing of uranium in this area is described in some detail. Exploration, open pit mining, in-situ solution mining and processing techniques for ''yellowcake'' (U 3 O 8 ), the uranium product of the area, are discussed. The state and federal regulations pertinent to uranium mining and milling are summarized. Finally, the environmental effects of these activities are discussed and conclusions and recommendations are drawn

Environmental aspects of hard coal mines closure in Poland

International Nuclear Information System (INIS)

Chaber, M.; Krogulski, K.; Gawlik, L.

1998-01-01

The environmental problems that arise during the closure processes of hard coal mines in Poland are undertaken in the paper. The problems of changes in water balance in rock mass are described with a stress put on underground water management. Regulation concerning ground reclamation and utilisation and removal of existing heat and power plants which after the mines closure will continue to supply surrounding consumers are stressed and the possible solutions are shown. 13 refs

Accounting and Financial Data Analysis Data Mining Tools

Directory of Open Access Journals (Sweden)

Diana Elena Codreanu

2011-05-01

Full Text Available Computerized accounting systems in recent years have seen an increase in complexity due to thecompetitive economic environment but with the help of data analysis solutions such as OLAP and DataMining can be a multidimensional data analysis, can detect the fraud and can discover knowledge hidden indata, ensuring such information is useful for decision making within the organization. In the literature thereare many definitions for data mining but all boils down to same idea: the process takes place to extract newinformation from large data collections, information without the aid of data mining tools would be verydifficult to obtain. Information obtained by data mining process has the advantage that only respond to thequestion of what happens but at the same time argue and show why certain things are happening. In this paperwe wish to present advanced techniques for analysis and exploitation of data stored in a multidimensionaldatabase.

Question marks of the Czech coal mining industry

International Nuclear Information System (INIS)

Dopita, M.; Pesek, J.

1995-01-01

An overview of brown and black coal mining in the Czech Republic is presented, and problems of the extent of coal reserves and of the profitability of deep black coal mining are discussed. Costs of coal mining in foreign countries are given. Coal mining in the Czech Republic can be expected to be loss-making unless coal prices are increased. Since coal resources in the Czech Republic are limited, additional nuclear power plants will have to be constructed or else coal for power generation will have to be imported. The environmental aspects of coal mining and burning are discussed. Medium-term and long-term solutions to reduce the environmental burden include thermal power plant desulfurization, application of the fluidized-bed combustion regime to coals with large ash and/or sulfur contents, and introduction of gas in towns and power plants. In the short run, large-scale consumers in towns and coal basins should be obliged to accumulate reserves of low-sulfur coal for later use. (J.B.). 2 tabs., 3 figs., 8 refs

Designing optimum diameter of skip shafts in mines with inclined or steep coal seams

Energy Technology Data Exchange (ETDEWEB)

Durov, E.M.

1981-07-01

This paper discusses methods of increasing depth of operating shaft mines considering optimization of hoisting systems. The following solutions are analyzed: removing mined rock material to the surface, to operating horizon, to the deepest horizon, removing rock to the deepest horizon by enlarging a large diameter borehole. It is suggested that removing rock material to the surface is most economical. This solution is sometimes difficult to implement due to design of mine shafts. If a shaft is equipped with two pairs of skips, or with a pair of skips and two independent skips, one skip or a pair of skips can be removed to form free space for buckets used to hoist mined rock and coal. The bucket moves along rope shaft guides. Analysis of the optimum hoisting systems in shaft mines for coal mines with the following design capacity is carried out: 0.9, 1.2, 1.5 and 1.8 Mmt a year. The following depth of working horizons is evaluated: 600, 800, 1000, 1200, 1400 and 1600 m. It is assumed that coal and rock are hoisted separately. Advance rate ranges from 10 to 50 m/month. The results of analysis are shown in two tables. It is suggested that from the point of view of increasing depth of active mine shafts the following solutions are optimum: 7 m shaft with a system of three independently moving skips (two for coal, one for rock material), and 8 m shaft equipped with a pair of skips and two independent skips (one of the independently moving skips is used for rock hoisting). 4 refs.

Biochar application to hardrock mine tailings: Soil quality, microbial activity, and toxic element sorption

Science.gov (United States)

Kelly, Charlene N.; Peltz, Christopher D.; Stanton, Mark R.; Rutherford, David W.; Rostad, Colleen E.

2014-01-01

Waste rock piles from historic mining activities remain unvegetated as a result of metal toxicity and high acidity. Biochar has been proposed as a low-cost remediation strategy to increase soil pH and reduce leaching of toxic elements, and improve plant establishment. In this laboratory column study, biochar made from beetle-killed pine wood was assessed for utility as a soil amendment by mixing soil material from two mine sites collected near Silverton, Colorado, USA with four application rates of biochar (0%, 10%, 20%, 30% vol:vol). Columns were leached seven times over 65 days and leachate pH and concentration of toxic elements and base cations were measured at each leaching. Nutrient availability and soil physical and biological parameters were determined following the incubation period. We investigated the hypotheses that biochar incorporation into acidic mine materials will (1) reduce toxic element concentrations in leaching solution, (2) improve soil parameters (i.e. increase nutrient and water holding capacity and pH, and decrease compaction), and (3) increase microbial populations and activity. Biochar directly increased soil pH (from 3.33 to 3.63 and from 4.07 to 4.77 in the two materials) and organic matter content, and decreased bulk density and extractable salt content in both mine materials, and increased nitrate availability in one material. No changes in microbial population or activity were detected in either mine material upon biochar application. In leachate solution, biochar increased base cations from both materials and reduced the concentrations of Al, Cd, Cu, Pb, and Zn in leachate solution from one material. However, in the material with greater toxic element content, biochar did not reduce concentrations of any measured dissolved toxic elements in leachate and resulted in a potentially detrimental release of Cd and Zn into solution at concentrations above that of the pure mine material. The length of time of effectiveness and specific

ISR mining of uranium in the permafrost zone, Khiagda Mine (Russian Federation)

International Nuclear Information System (INIS)

Solodov, I.

2014-01-01

groundwater caused low uranium recovery at the initial stage of development. The extensive scientific and research works carried out to increase the uranium content in the productive solutions, and in particular, the use of an oxidant, gave the possibility to bring the Khiagda mine to the world second place in terms of this indicant. Research is planned aiming to improve the control of groundwater resources inside the paleovalleys and between the paleovalleys, decrease the leaching solutions viscosity and improve the design of the technological wells. Implementation of the planned researches, despite the harsh climate and complicated geological and production settings, will bring the Khiagda mine to a world-leading position, and it will gain competitiveness with the ISR enterprises of Kazakhstan and Uzbekistan. (author)

Application of text mining for customer evaluations in commercial banking

Science.gov (United States)

Tan, Jing; Du, Xiaojiang; Hao, Pengpeng; Wang, Yanbo J.

2015-07-01

Nowadays customer attrition is increasingly serious in commercial banks. To combat this problem roundly, mining customer evaluation texts is as important as mining customer structured data. In order to extract hidden information from customer evaluations, Textual Feature Selection, Classification and Association Rule Mining are necessary techniques. This paper presents all three techniques by using Chinese Word Segmentation, C5.0 and Apriori, and a set of experiments were run based on a collection of real textual data that includes 823 customer evaluations taken from a Chinese commercial bank. Results, consequent solutions, some advice for the commercial bank are given in this paper.

Melting decontamination and recycling of radioactive polluted metals from uranium mining and metallurgy

International Nuclear Information System (INIS)

Chen Anquan

2011-01-01

Melting method is a primary method used for decontamination of radioactive polluted metal from uranium mining and metallurgy. The decontamination mechanism of the method, the way selection and its features are introduced. Taking the ten year's work of CNNC Uranium Mining and Metallurgy Radioactive Polluted Metal Melting Processing Center as example, the effects of processing radioactive polluted metals by smelting method are discussed. The surface pollution levels of radioactive polluted metal from uranium mining and metallurgy decreased from 4-48 Bq/cm 2 before decontamination to 0.004-0.016 Bq/cm 2 after decontamination, and the specific activity of its metal is less than 1 Bq/g, which is below the solution control level proposed by IAEARS-G1.7 'the application of the concepts of exclusion, immunity and solution control'. The metals after decontamination can be recycled by producing tooth plate and bucket teeth of excavator used in mines. (authors)

Sustainable Mining Environment: Technical Review of Post-mining Plans

Directory of Open Access Journals (Sweden)

Restu Juniah

2017-12-01

Full Text Available The mining industry exists because humans need mining commodities to meet their daily needs such as motor vehicles, mobile phones, electronic equipment and others. Mining commodities as mentioned in Government Regulation No. 23 of 2010 on Implementation of Mineral and Coal Mining Business Activities are radioactive minerals, metal minerals, nonmetallic minerals, rocks and coal. Mineral and coal mining is conducted to obtain the mining commodities through production operations. Mining and coal mining companies have an obligation to ensure that the mining environment in particular after the post production operation or post mining continues. The survey research aims to examine technically the post-mining plan in coal mining of PT Samantaka Batubara in Indragiri Hulu Regency of Riau Province towards the sustainability of the mining environment. The results indicate that the post-mining plan of PT Samantaka Batubara has met the technical aspects required in post mining planning for a sustainable mining environment. Postponement of post-mining land of PT Samantaka Batubara for garden and forest zone. The results of this study are expected to be useful and can be used by stakeholders, academics, researchers, practitioners and associations of mining, and the environment.

Waste disposal in underground mines -- A technology partnership to protect the environment

International Nuclear Information System (INIS)

1995-01-01

Environmentally compatible disposal sites must be found despite all efforts to avoid and reduce the generation of dangerous waste. Deep geologic disposal provides the logical solution as ever more categories of waste are barred from long-term disposal in near-surface sites through regulation and litigation. Past mining in the US has left in its wake large volumes of suitable underground space. EPA studies and foreign practice have demonstrated deep geologic disposal in mines to be rational and viable. In the US, where much of the mined underground space is located on public lands, disposal in mines would also serve the goal of multiple use. It is only logical to return the residues of materials mined from the underground to their origin. Therefore, disposal of dangerous wastes in mined underground openings constitutes a perfect match between mining and the protection and enhancement of the environment

Mine surveying works for the purpose of excavating the remaining reserves of bauxite in the deposit of "Podbracan"

OpenAIRE

Milutinovic, Aleksandar; Ganic, Aleksandar; Diyab, Thamer Rayes; Tokalic, Rade; Ganic, Meri

2015-01-01

Mining projects for mineral resource mining contain in certain cases specific technical and technological solutions, these being the result of the mine’s characteristic spatial position and the geometry of the ore deposit, existing mining works, structures, and terrain relief etc. For the purpose of completion of the mining project, it is necessary to carry out a series of mining and surveying tasks during the pre-project and project stage of mining, as well as during the construction o...

Contract Mining versus Owner Mining

African Journals Online (AJOL)

Owner

mining companies can concentrate on their core businesses while using specialists for ... 2 Definition of Contract and Owner. Mining ... equipment maintenance, scheduling and budgeting ..... No. Region. Amount Spent on. Contract Mining. ($ billion). Percent of. Total. 1 ... cost and productivity data based on a large range.

Data Mining Process Optimization in Computational Multi-agent Systems

OpenAIRE

Kazík, O.; Neruda, R. (Roman)

2015-01-01

In this paper, we present an agent-based solution of metalearning problem which focuses on optimization of data mining processes. We exploit the framework of computational multi-agent systems in which various meta-learning problems have been already studied, e.g. parameter-space search or simple method recommendation. In this paper, we examine the effect of data preprocessing for machine learning problems. We perform the set of experiments in the search-space of data mining processes which is...

Optimization of mining design of Hongwei uranium mine

International Nuclear Information System (INIS)

Wu Sanmao; Yuan Baixiang

2012-01-01

Combined with the mining conditions of Hongwei uranium mine, optimization schemes for hoisting cage, mine drainge,ore transport, mine wastewater treatment, power-supply system,etc are put forward in the mining design of the mine. Optimized effects are analyzed from the aspects of technique, economy, and energy saving and reducing emissions. (authors)

Environmental management in hard coal mine group in the Upper Silesian Coal Basin, Poland

International Nuclear Information System (INIS)

Pozzi, M.; Weglarczyk, J.

2000-01-01

Mining activity and the other branches of heavy industry existing in the USCB for over 2 centuries have made large unfavourable changes of environment. Prevention of its further degradation needs the solution for the following main problems: utilisation of high saline mine drainage water (a problem unique in the world scale), treatment of solid wastes, land reclamation (mainly treatment of areas of ground subsiding). Market economy introduced 10 years ago and the necessity that all fields of life conform to the requirements of the European Union force the process of deep restructurisation of mining industry. One of the conditions for success of restructuring is the solution of ecological problems. The possibility of environmental management system implementation according to the ISO 14000 standard in the coal mine group condition was discussed. The chances and presumed results of these activities were presented in this paper. 6 refs

Intelligent Mining Engineering Systems in the Structure of Industry 4.0

Directory of Open Access Journals (Sweden)

Rylnikova Marina

2017-01-01

Full Text Available The solution of the problem of improving the human environment and working conditions at mines is based on the provision of the rationale of parameters and conditions for the implementation of an environmentally balanced cycle of comprehensive development of mineral deposits on the basis of the design of mining engineering systems characterized by the minimization of the human factor effect in danger zones of mining operations. In this area, robotized technologies are being developed, machinery and mechanisms with the elements of artificial intelligence, and mining and transport system automatic controls are being put into service throughout the world. In the upcoming decades, mining machines and mechanisms will be virtually industrial robots. The article presents the results of zoning of open-pit and underground mine production areas, as well as mining engineering system of combined development depending on the fact and periodicity of human presence in zones of mining processes. As a surface geotechnology case study, the software structure based on a modular concept is described. The performance philosophy of mining and transport equipment with the elements of artificial intelligence is shown when it is put into service in an open pit.

Intelligent Mining Engineering Systems in the Structure of Industry 4.0

Science.gov (United States)

Rylnikova, Marina; Radchenko, Dmitriy; Klebanov, Dmitriy

2017-11-01

The solution of the problem of improving the human environment and working conditions at mines is based on the provision of the rationale of parameters and conditions for the implementation of an environmentally balanced cycle of comprehensive development of mineral deposits on the basis of the design of mining engineering systems characterized by the minimization of the human factor effect in danger zones of mining operations. In this area, robotized technologies are being developed, machinery and mechanisms with the elements of artificial intelligence, and mining and transport system automatic controls are being put into service throughout the world. In the upcoming decades, mining machines and mechanisms will be virtually industrial robots. The article presents the results of zoning of open-pit and underground mine production areas, as well as mining engineering system of combined development depending on the fact and periodicity of human presence in zones of mining processes. As a surface geotechnology case study, the software structure based on a modular concept is described. The performance philosophy of mining and transport equipment with the elements of artificial intelligence is shown when it is put into service in an open pit.

DETERMINATION OF OPTIMAL CONTOURS OF OPEN PIT MINE DURING OIL SHALE EXPLOITATION, BY MINEX 5.2.3. PROGRAM

Directory of Open Access Journals (Sweden)

Miroslav Ignjatović

2013-04-01

Full Text Available By examination and determination of optimal solution of technological processes of exploitation and oil shale processing from Aleksinac site and with adopted technical solution and exploitation of oil shale, derived a technical solution that optimize contour of the newly defined open pit mine. In the world, this problem is solved by using a computer program that has become the established standard for quick and efficient solution for this problem. One of the computer’s program, which can be used for determination of the optimal contours of open pit mines is Minex 5.2.3. program, produced in Australia in the Surpac Minex Group Pty Ltd Company, which is applied at the Mining and Metallurgy Institute Bor (no. of licenses are SSI - 24765 and SSI - 24766. In this study, authors performed 11 optimization of deposit geo - models in Minex 5.2.3. based on the tests results, performed in a laboratory for soil mechanics of Mining and Metallurgy Institute, Bor, on samples from the site of Aleksinac deposits.

Contribution to the study of uranium migration and some trace elements in solution from Pocos de Caldas uranium mining

International Nuclear Information System (INIS)

Zenaro, R.

1989-01-01

It was studied the chemical composition of ground water from four boreholes as a contribution to the hydrogeochemical studies in the Pocos de Caldas uranium mining. Methods for water analyses were selected and optimized in order to determine the main anions, specially the ones which form stable complexes with uranium ions. Fluoride and chloride were determined by potentiometry; phosphate, nitrate and silicate by spectrophotometry. Cations were determined by atomic absorption spectrophotometry flame emission and argon plasma emission excited by continuous current arch (DCP). Uranium was determined by fluorimetry with a concentration range from 3 to 7 ppb and its distribution calculated among the different species into solution through the measures of pH, Eh, anion amounts and stability of their respective complexes. (author) [pt

Characteristics of economic and mathematical simulation of development of working mines

Energy Technology Data Exchange (ETDEWEB)

Gorodnichiy, V G

1979-01-01

Economic and mathematical simulation is promoted by a standard procedure of computations to optimize development of production for the future as the principal method of solution of a problem. However traditional approaches to design of models need refinement which take into account the dynamic nature of a coal mine. First, the characteristics of the elements in subsystems change; second, as time passes the very structure of the system is transformed. Consequently, these processes should be reflected in the simulation in a corresponding manner. In practical terms this is expressed in the formation of files of forecast information used in computations according to a model and also in development of procedures of transformation of the model structure with a change of the structure of the subject mine with time. Let us note that the invariability of the state of the principal elements of the technological scheme of a mine with time is the necessary condition of acceptability of a model of the evolution type which is most common. For working mines the freedom of selecting solutions is considerably less than the analogous one in design.

Surface Mines, Other - Longwall Mining Panels

Data.gov (United States)

NSGIC Education | GIS Inventory — Coal mining has occurred in Pennsylvania for over a century. A method of coal mining known as Longwall Mining has become more prevalent in recent decades. Longwall...

Cubis AG - for the mining industry and for new markets

International Nuclear Information System (INIS)

Hamm, E.

1994-01-01

In Germany the research funds for the mining industry will again be cut drastically in future. Cubis must plan and use the remaining research funds in an optimum manner in conjunction with the mining industry itself and also the mining supply industry. Close cooperation and continuous coordination between the research institutes and industrial partners will continue to be necessary for this purpose. Transfer of technology between research and industrial application must take place more smoothly. It is not a question of marketing the implementation of results of individual research and development projects; on the contrary system solutions from one source are required and offered. Long-term business relationships with industrial partners, within the framework of which contract research, advice, engineering, training, etc. can be realised, are desirable. Cubis has undertaken the responsibility to make available services to the mining industry and involve itself in new markets with the released capacities. The success so far achieved by the new company shows that competence and potential to face up to the large tasks exist. Cubis is equipped to tackle the continuous challenge of technology and safety at work, but also the tasks in the raw material and environment sectors in the nineties and is the suitable partner for solution of problems. (orig.)

Retrogressively in-situ ore body chemical mining system and method

International Nuclear Information System (INIS)

Jacoby, C.H.

1981-01-01

A method is provided for mining a horizontal ore body lying underneath an overburden that precludes the use of other mining methods. Such an overburden may comprise a body of water, an inhabited area, or a geological formation that is difficult to penetrate. A vertical shaft is sunk in a convenient location, and at least two boreholes are drilled in a horizontal direction extending outwards from the shaft. The boreholes ae roughly parallel, but sloped in such a way as to facilitate the flow of a leaching solution along them. The formation lying between the boreholes is fractured to make it permeable to the leaching solution, and the solution is injected through one hole and recovered through the other. Different zones of the ore body may be fractured successively, starting with the most distant. It is desirable to backfill depleted zones with an inert waste material, cement, or other filler

Stabilization of the As-contaminated soil from the metal mining areas in Korea.

Science.gov (United States)

Ko, Myoung-Soo; Kim, Ju-Yong; Bang, Sunbeak; Lee, Jin-Soo; Ko, Ju-In; Kim, Kyoung-Woong

2012-01-01

The stabilization efficiencies of arsenic (As) in contaminated soil were evaluated using various additives such as limestone, steel mill slag, granular ferric hydroxide (GFH), and mine sludge collected from an acid mine drainage treatment system. The soil samples were collected from the Chungyang area, where abandoned Au-Ag mines are located. Toxicity characteristic leaching procedure, synthetic precipitation leaching procedure, sequential extraction analysis, aqua regia digestion, cation exchange capacity, loss on ignition, and particle size distribution were conducted to assess the physical and chemical characteristics of highly arsenic-contaminated soils. The total concentrations of arsenic in the Chungyang area soil ranged up to 145 mg/kg. After the stabilization tests, the removal percentages of dissolved As(III) and As(V) were found to differ from the additives employed. Approximately 80 and 40% of the As(V) and As(III), respectively, were removed with the use of steel mill slag. The addition of limestone had a lesser effect on the removal of arsenic from solution. However, more than 99% of arsenic was removed from solution within 24 h when using GFH and mine sludge, with similar results observed when the contaminated soils were stabilized using GFH and mine sludge. These results suggested that GFH and mine sludge may play a significant role on the arsenic stabilization. Moreover, this result showed that mine sludge can be used as a suitable additive for the stabilization of arsenic.

Application for trackless mining technique in Benxi uranium mine

International Nuclear Information System (INIS)

Chen Bingguo

1998-01-01

The author narrates the circumstances achieving constructional target in Benxi Uranium Mine under relying on advance of science and technology and adopting small trackless mining equipment, presents the application of trackless mining equipment at mining small mine and complex mineral deposit and discusses the unique superiority of trackless mining technique in development work, mining preparation work and backstoping

Physics Mining of Multi-Source Data Sets

Science.gov (United States)

Helly, John; Karimabadi, Homa; Sipes, Tamara

2012-01-01

Powerful new parallel data mining algorithms can produce diagnostic and prognostic numerical models and analyses from observational data. These techniques yield higher-resolution measures than ever before of environmental parameters by fusing synoptic imagery and time-series measurements. These techniques are general and relevant to observational data, including raster, vector, and scalar, and can be applied in all Earth- and environmental science domains. Because they can be highly automated and are parallel, they scale to large spatial domains and are well suited to change and gap detection. This makes it possible to analyze spatial and temporal gaps in information, and facilitates within-mission replanning to optimize the allocation of observational resources. The basis of the innovation is the extension of a recently developed set of algorithms packaged into MineTool to multi-variate time-series data. MineTool is unique in that it automates the various steps of the data mining process, thus making it amenable to autonomous analysis of large data sets. Unlike techniques such as Artificial Neural Nets, which yield a blackbox solution, MineTool's outcome is always an analytical model in parametric form that expresses the output in terms of the input variables. This has the advantage that the derived equation can then be used to gain insight into the physical relevance and relative importance of the parameters and coefficients in the model. This is referred to as physics-mining of data. The capabilities of MineTool are extended to include both supervised and unsupervised algorithms, handle multi-type data sets, and parallelize it.

Mining engineer requirements in a German coal mine

Energy Technology Data Exchange (ETDEWEB)

Rauhut, F J

1985-10-01

Basic developments in German coal mines, new definitions of working areas of mining engineers, and groups of requirements in education are discussed. These groups include: requirements of hard-coal mining at great depth and in extended collieries; application of process technology and information systems in semi-automated mines; thinking in processes and systems; organizational changes; future requirements of mining engineers; responsibility of the mining engineer for employees and society.

Foundations for technical solutions in organizing excavation of open ore pits

OpenAIRE

С. И. Фомин

2016-01-01

To study stochastic mining technical systems of opencast mines, where parallel to clearly defined values random and indefinite factors operate, probabilistic and statistical techniques are mostly used nowadays. Formally, the task of producing a design solution may, under the conditions of indeterminacy be transformed into an equivalent deterministic problem formulated for a risky situation. Uncertainty in the initial mining, geological and technical-economic information available during t...

Mining Together : Large-Scale Mining Meets Artisanal Mining, A Guide for Action

OpenAIRE

World Bank

2009-01-01

The present guide mining together-when large-scale mining meets artisanal mining is an important step to better understanding the conflict dynamics and underlying issues between large-scale and small-scale mining. This guide for action not only points to some of the challenges that both parties need to deal with in order to build a more constructive relationship, but most importantly it sh...

Vlsi implementation of flexible architecture for decision tree classification in data mining

Science.gov (United States)

Sharma, K. Venkatesh; Shewandagn, Behailu; Bhukya, Shankar Nayak

2017-07-01

The Data mining algorithms have become vital to researchers in science, engineering, medicine, business, search and security domains. In recent years, there has been a terrific raise in the size of the data being collected and analyzed. Classification is the main difficulty faced in data mining. In a number of the solutions developed for this problem, most accepted one is Decision Tree Classification (DTC) that gives high precision while handling very large amount of data. This paper presents VLSI implementation of flexible architecture for Decision Tree classification in data mining using c4.5 algorithm.

ORGANIZATION OF MANAGEMENT ACCOUNTING AND COST CALCULATION OF MINING IN JIU VALLEY

Directory of Open Access Journals (Sweden)

ILEANA-SORINA BOCA (RAKOS

2011-01-01

Full Text Available The scientific approach taken, due to the fact that a nationally more acute problem arises regarding mining restructuring, namely the closure of uneconomic mines, in this paper I want to report my finding on how management accounting is organized and which is the costing method currently applied by the seven mines in the Jiu Valley, which are currently functional, as well as to identify their limitations and advantages for improving them and identifying financial and economic solutions, demonstrating that in fact these are viable economic entities.

UST-IDRC national symposium on the mining industry and the environment: programme and abstracts

International Nuclear Information System (INIS)

1997-04-01

The National Symposium on the mining industry and the environment was organized by the UST/IDRC Environmental Research Group in the Department of Chemistry of the University of Science and Technology, Kumasi, Ghana. The symposium generally covered strategies for the development of the mining industry as well as solutions to the environmental problems associated with the industry in Ghana. The publication contains the programme and abstracts of scientific sessions of the Symposium. The abstracts covered the following topics among others: multi-element analysis of mineral ores samples, review of environmental studies related to gold mining in Ghana, local sulphooxidizing bacteria for environmentally friendly gold mining, arsenic pollution in streams and sediments, rainfall erositivity and soil loss from degraded lands and mine spoils, the impact of surface mining on forest structure and environment, current environmental practices in the mining industry, and the role of the mining industry in the economy of Ghana

Nanofiltration of Mine Water: Impact of Feed pH and Membrane Charge on Resource Recovery and Water Discharge

Directory of Open Access Journals (Sweden)

Mark Mullett

2014-03-01

Full Text Available Two nanofiltration membranes, a Dow NF 270 polyamide thin film and a TriSep TS 80 polyamide thin film, were investigated for their retention of ionic species when filtering mine influenced water streams at a range of acidic pH values. The functional iso-electric point of the membranes, characterized by changes in retention over a small pH range, were examined by filtering solutions of sodium sulphate. Both membranes showed changes in retention at pH 3, suggesting a zero net charge on the membranes at this pH. Copper mine drainage and synthetic solutions of mine influenced water were filtered using the same membranes. These solutions were characterized by pH values within 2 and 5, thus crossing the iso-electric point of both membranes. Retention of cations was maximized when the feed solution pH was less than the iso-electric point of the membrane. In these conditions, the membrane has a net positive charge, reducing the transmission rate of cations. From the recoveries of a range of cations, the suitability of nanofiltration was discussed relative to the compliance with mine water discharge criteria and the recovery of valuable commodity metals. The nanofiltration process was demonstrated to offer advantages in metal recovery from mine waste streams, concomitantly enabling discharge criteria for the filtrate disposal to be met.

Selected water-quality data for the Standard Mine, Gunnison County, Colorado, 2006-2007

Science.gov (United States)

Verplanck, Philip L.; Manning, Andrew H.; Mast, M. Alisa; Wanty, Richard B.; McCleskey, R. Blaine; Todorov, Todor I.; Adams, Monique

2007-01-01

Mine drainage and underground water samples were collected for analysis of inorganic solutes as part of a 1-year, hydrogeologic investigation of the Standard Mine and vicinity. The U.S. Environmental Protection Agency has listed the Standard Mine in the Elk Creek drainage near Crested Butte, Colorado, as a Superfund Site because discharge from the Standard Mine enters Elk Creek, contributing dissolved and suspended loads of zinc, cadmium, copper, and other metals to Coal Creek, which is the primary drinking-water supply for the town of Crested Butte. Water analyses are reported for mine-effluent samples from Levels 1 and 5 of the Standard Mine, underground samples from Levels 3 and 5 of the Standard Mine, mine effluent from an adit located on the Elk Lode, and two spring samples that emerged from waste-rock material below Level 5 of the Standard Mine and the adit located on the Elk Lode. Reported analyses include field parameters (pH, specific conductance, water temperature, dissolved oxygen, and redox potential) and major constituents and trace elements.

DECISION SUPPORT SYSTEM TO SUPPORT DECISION PROCESSES WITH DATA MINING

OpenAIRE

Rupnik, Rok; Kukar, Matjaž

2007-01-01

Traditional techniques of data analysis do not enable the solution of all kind of problems and for that reason they have become insufficient. This caused a newinterdisciplinary field of data mining to arise, encompassing both classical statistical, and modern machine learning techniques to support the data analysis and knowledge discovery from data. Data mining methods are powerful in dealing with large quantities of data, but on the other hand they are difficult to master by business users t...

Challenges in recovering resources from acid mine drainage

Science.gov (United States)

Nordstrom, D. Kirk; Bowell, Robert J.; Campbell, Kate M.; Alpers, Charles N.

2017-01-01

Metal recovery from mine waters and effluents is not a new approach but one that has occurred largely opportunistically over the last four millennia. Due to the need for low-cost resources and increasingly stringent environmental conditions, mine waters are being considered in a fresh light with a designed, deliberate approach to resource recovery often as part of a larger water treatment evaluation. Mine water chemistry is highly dependent on many factors including geology, ore deposit composition and mineralogy, mining methods, climate, site hydrology, and others. Mine waters are typically Ca-Mg-SO4±Al±Fe with a broad range in pH and metal content. The main issue in recovering components of these waters having potential economic value, such as base metals or rare earth elements, is the separation of these from more reactive metals such as Fe and Al. Broad categories of methods for separating and extracting substances from acidic mine drainage are chemical and biological. Chemical methods include solution, physicochemical, and electrochemical technologies. Advances in membrane techniques such as reverse osmosis have been substantial and the technique is both physical and chemical. Biological methods may be further divided into microbiological and macrobiological, but only the former is considered here as a recovery method, as the latter is typically used as a passive form of water treatment.

Production of uranium in Navoi Mining and Metallurgy Combinat, Uzbekistan

International Nuclear Information System (INIS)

Kuchersky, N.; Tolstov, E.A.; Mazurkevich, A.P.; Inozemzev, S.B.

2001-01-01

Full text: Under the conditions of constantly increasing level of development of the nuclear power, it is inevitable that the uranium stockpiles accumulated to 1985 will soon be depleted. This consideration underlies the development concept of uranium production in the Navoi Mining and Metallurgy Combinat, Uzbekistan. Because this product has become a source of hard currency revenues for the Republic, there will be a significant increase in the processed ore and output of uranium oxide within the next few years. Uranium production in the Navoi Mining and Metallurgy Combinat represents a full-cycle operations ranging from geological survey through hydrometallurgical processing resulting in the output of uranium concentrate in the form of uranium protoxide-oxide (U 3 O 8 ). The NMMC uranium operations include the Hydrometallurgical Plant and three facilities accomplishing ISL mining facilities. A successful start on the development of the Uchkuduk deposit by ISL method in the 1960s gave rise to scientific and production approach for development of other uranium deposits of the infiltration bedded (sandstone) type. Uranium recovery by ISL has become a separate mining branch within the 30-year period of its history and the contribution of this branch in uranium production has steadily grown. Since 1995 all uranium produced by Navoi Mining and Metallurgy Combinat is attributed to ISL. During this evolution period of the ISL method, a whole range of systematic scientific research and practical works were carried out covering improvement of process flowsheets, equipment, operational methods and techniques for particular mining conditions at those specific sites. In co-operation with design and scientific research institutions, a significant number of scientific researches, test works, design and engineering projects were achieved in order to create optimal conditions for ISL mining and further processing of pregnant solutions by sorption as well as to appropriately equip

Implementation of Paste Backfill Mining Technology in Chinese Coal Mines

Science.gov (United States)

Chang, Qingliang; Zhou, Huaqiang; Bai, Jianbiao

2014-01-01

Implementation of clean mining technology at coal mines is crucial to protect the environment and maintain balance among energy resources, consumption, and ecology. After reviewing present coal clean mining technology, we introduce the technology principles and technological process of paste backfill mining in coal mines and discuss the components and features of backfill materials, the constitution of the backfill system, and the backfill process. Specific implementation of this technology and its application are analyzed for paste backfill mining in Daizhuang Coal Mine; a practical implementation shows that paste backfill mining can improve the safety and excavation rate of coal mining, which can effectively resolve surface subsidence problems caused by underground mining activities, by utilizing solid waste such as coal gangues as a resource. Therefore, paste backfill mining is an effective clean coal mining technology, which has widespread application. PMID:25258737

Time-space coordination of mining operations for protection of the surface. [Poland

Energy Technology Data Exchange (ETDEWEB)

Stranz, B

1975-01-01

In Polish mines, more than 41 percent of coal resources beneath built-up areas can be extracted. In 1973 an analysis of the mining and geological conditions was conducted in one of the mines, principally from the point of view of suitably coordinated mining advance with caving. Various possible systems of extraction were analyzed for three time periods up to 1985. A detailed inventory was prepared of surface structures in the whole concession area, particular attention being paid to industrial and social or communal areas. Preliminary and final predictions were made of deformation indices for various time periods, including predicted subsidences, and dynamic and static horizontal strains. The optimum variant was chosen, and capital expenditure and economic effects were taken into account. Solutions worked out for various sectors of the overall problem were presented to the mine management in the form of programmes for advancing the mining face in individual panels and seams so as to obtain maximum possible production with roof caving, under protected buildings.

Lunabotics Mining: Evolution of ARTEMIS PRIME

Science.gov (United States)

Bertke, Sarah; Gries, Christine; Huff, Amanda; Logan, Brittany; Oliver, Kaitlin; Rigney, Erica; Tyree, Whitney; Young, Maegan

2010-01-01

This slide presentation reviews the development of Amassing Regolith with Topper Engineers eMploying Innovative Solutions (ARTEMIS) in a competition to develop robotic lunar mining capabilities. The goal of the competition was to design, build and operate a remotely controlled device that is capable of excavating, transporting and discharging lunar regolith simulant in a lunar environment over a 13 minute period.

A geothermal recycling system for cooling and heating in deep mines

International Nuclear Information System (INIS)

Guo, Pingye; He, Manchao; Zheng, Liange; Zhang, Na

2017-01-01

Highlights: • A geothermal recycling system for cooling and heating was presented in coal mines. • The COP of this cooling subsystem is 30% higher than that of others. • The COP is 20% higher with the parallel running of cooling and heating systems. - Abstract: In the operation of deep coal mines, cooling systems must be built (in most cases) because of the high-temperature working environment within such mines. Once the coal is mined, it is often used to supply heat for buildings and domestic hot water. In either instance, the energy consumed can create environmental pollution. As a potential solution to this problem, we present a geothermal recycling system for mines (GRSM) for parallel mine cooling and surface heating. The performance of this system is investigated based on the observed data. Compared with traditional cooling systems, the most obvious feature of this system is the removal of a cooling tower, which contributes to a 30% increase in performance. Moreover, the parallel running of cooling and heating systems can effectively recover waste heat, improving energy efficiency by 20%.

Shale Failure Mechanics and Intervention Measures in Underground Coal Mines: Results From 50 Years of Ground Control Safety Research

Science.gov (United States)

2015-01-01

Ground control research in underground coal mines has been ongoing for over 50 years. One of the most problematic issues in underground coal mines is roof failures associated with weak shale. This paper will present a historical narrative on the research the National Institute for Occupational Safety and Health has conducted in relation to rock mechanics and shale. This paper begins by first discussing how shale is classified in relation to coal mining. Characterizing and planning for weak roof sequences is an important step in developing an engineering solution to prevent roof failures. Next, the failure mechanics associated with the weak characteristics of shale will be discussed. Understanding these failure mechanics also aids in applying the correct engineering solutions. The various solutions that have been implemented in the underground coal mining industry to control the different modes of failure will be summarized. Finally, a discussion on current and future research relating to rock mechanics and shale is presented. The overall goal of the paper is to share the collective ground control experience of controlling roof structures dominated by shale rock in underground coal mining. PMID:26549926

Trace Metal Contamination in Water from Abandoned Mining and ...

African Journals Online (AJOL)

Fiifi Baidoo

copper and lead sulpho-salts (Dzigbordi-Adjimah, 1988). ... The resulting solution was analysed for trace metals at the Institute of Mining and Mineral ..... found in the samples (Tables 3 and 4) may be due to the mineral-water interactions and.

Rehabilitation programme for the Mary Kathleen uranium mine

International Nuclear Information System (INIS)

Duffield, I.R.; Ward, T.A.

1989-01-01

The Mary Kathleen uranium deposit was located in the North West region of the state of Queensland, Australia. It was discovered in 1954 and mined in two phases for a total of twelve years between 1958 and 1982. In October 1982 operations at the site ceased with the deposit virtually exhausted and all contractual commitments completed. From the outset, a site specific approach was adopted in developing the rehabilitation plan. Other sites'experience was evaluated but was adopted only if appropriate for Mary Kathleen. As a result of this approach a conceptual solution was established for each area within the site. Each solution was then used as the basis for detailed planning for rehabilitation of that area. The rehabilitation program commenced in mid 1982 and was completed in late 1985. Results of monitoring provided a strong basis for confidence that the objectives of the plan have been met, and allowed for the relinquishment of all the remaining mining leases in August 1987

Proceedings of Twenty-Seventh Annual Institute on Mining Health, Safety and Research

Energy Technology Data Exchange (ETDEWEB)

Bockosh, G.R. [ed.] [Pittsburgh Research Center, US Dept. of Energy (United States); Langton, J. [ed.] [Mine Safety and Health Administration, US Dept. of Labor (United States); Karmis, M. [ed.] [Virginia Polytechnic Institute and State University. Dept. of Mining and Minerals Engineering, Blacksburg (United States)

1996-12-31

This Proceedings contains the presentations made during the program of the Twenty-Seventh Annual Institute on Mining Health, Safety and Research held at Virginia Polytechnic Institute and State University, Blacksburg, Virginia, on August 26-28, 1996. The Twenty-Seventh Annual Institute on Mining, Health, Safety and Research was the latest in a series of conferences held at Virginia Polytechnic Institute and State University, cosponsored by the Mine Safety and Health Administration, United States Department of Labor, and the Pittsburgh Research Center, United States Department of Energy (formerly part of the Bureau of Mines, U. S. Department of Interior). The Institute provides an information forum for mine operators, managers, superintendents, safety directors, engineers, inspectors, researchers, teachers, state agency officials, and others with a responsible interest in the important field of mining health, safety and research. In particular, the Institute is designed to help mine operating personnel gain a broader knowledge and understanding of the various aspects of mining health and safety, and to present them with methods of control and solutions developed through research. Selected papers have been processed separately for inclusion in the Energy Science and Technology database.

The Strengthening of Geological Infrastructure, Research and Data Acquisition - Using Gis in Ivory Coast Gold Mines

Directory of Open Access Journals (Sweden)

Kouame Kouame Joseph Arthur

2017-01-01

Full Text Available The artisanal gold mining in Ivory Coast has become a key problem in the mining sector. A diverse group of people in Ivory Coast, including the young and the old, are all engaged in these activities that are reportedly better than agricultural inputs. However, it is still a high-risk activity that leads to pollution, environmental degradation and the loss of human life. About ten people die each year in the gold mines. This paper focuses on gold mine safety by using the Geographic Information System (GIS as a major solution to solve the artisanal gold mines problem, and also seeks to promote the mining industry in Ivory Coast.

30 CFR 819.21 - Auger mining: Protection of underground mining.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Auger mining: Protection of underground mining. 819.21 Section 819.21 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT... STANDARDS-AUGER MINING § 819.21 Auger mining: Protection of underground mining. Auger holes shall not extend...

Contract Mining versus Owner Mining – The Way Forward | Suglo ...

African Journals Online (AJOL)

Ghana Mining Journal ... By contracting out one or more of their mining operations, the mining companies can concentrate on their core businesses. This paper reviews ... The general trends in the mining industry show that contract mining will be the way forward for most mines under various circumstances in the future.

Proceedings of the meeting on uranium exploration, mining and extraction

International Nuclear Information System (INIS)

1996-01-01

Meeting on uranium exploration, mining, and extraction is aimed to expedite information exchange among researchers from the National Atomic Energy Agency (BATAN), their international colleagues, the higher education institutions,and other interested scientific communities on the latest development on Kalan uranium minerals exploration, mining, and extraction. Nuclear Minerals Development Centre (PPBGN) roles in nuclear energy provision, the theme of the meeting, reflect current advancements of the Centre in fulfilling its major tasks and responsibilities. In order to assist PPBGN better to assume its roles and responsibilities, the meeting is expected to bring forth essential solutions for problems and difficulties relevant to PPBGN's activities. Hence, the scope of the meeting will be limited to discussion on the status of nuclear minerals exploration, mining, and extraction technologies in Indonesia as well as the related environmental and workplace safeties in uranium mining and milling. Ten technical papers were presented in meeting, including four topics on exploration status and technology, three subject matter on mining, two presentations on milling, and one paper on environmental and workplace safeties

Selection of mining method for No.3 uranium ore body in the independent mining area at a uranium mine

International Nuclear Information System (INIS)

Ding Fulong; Ding Dexin; Ye Yongjun

2010-01-01

Mining operation in the existed mining area at a uranium mine is near completion and it is necessary to mine the No.3 uranium ore body in another mining area at the mine. This paper, based on the geological conditions, used analogical method for analyzing the feasible methods and the low cost and high efficiency mining method was suggested for the No.3 ore body in the independent mining area at the uranium mine. (authors)

Erosional stability of rehabilitated uranium mine structures incorporating natural landform characteristics, northern tropical Australia

International Nuclear Information System (INIS)

East, T.J.; Uren, C.J.; Noller, B.N.; Cull, R.F.; Curley, P.M.; Unger, C.J.

1994-01-01

Australian Government guidelines specify that tailings containment structures at rehabilitated uranium mines in the Alligator Rivers Region of tropical northern Australia should have an engineered structural life of 1000 years. As part of the containment structure design process, erosion plots incorporating both regional geomorphological characteristics (concave hillslope profiles and a weathering-resistant rock cover of schist) and more conventional engineering design parameters (straight slopes and mine waste rock) were constructed at the Ranger Uranium Mine. The plots were monitored for storm runoff, and concentrations of solutes, suspended solids and selected ions over successive wet seasons. The concave slopes (the hillslope analogues) had lower peak discharges and lower concentrations of suspended solids than the straight slopes. However, solute concentrations in runoff from the schist covered (hillslope) slopes were higher than from the waste rock covered plots. Solute (mainly magnesium sulfate) concentrations for both rock types decreased by about an order of magnitude over the wet season. High sulfate concentrations are also likely to decrease substantially after several wet seasons, due to settlement of the waste rock and a reduction in rates of weathering. Development of a vegetation cover on the rehabilitated landforms will reduce the high suspended sediment concentrations. These initial results suggest that rehabilitated uranium mine structures which utilise selected features of stable natural landforms in their design may have greater erosional stability than more conventionally engineered structures. (orig.)

Acidity and alkalinity in mine drainage: Theoretical considerations

Science.gov (United States)

Kirby, Carl S.; Cravotta,, Charles A.

2004-01-01

Acidity, net acidity, and net alkalinity are widely used parameters for the characterization of mine drainage, but these terms are not well defined and are often misunderstood. Incorrect interpretation of acidity, alkalinity, and derivative terms can lead to inadequate treatment design or poor regulatory decisions. We briefly explain derivations of theoretical expressions of three types of alkalinities (caustic, phenolphthalein, and total) and acidities (mineral, CO2, and total). Theoretically defined total alkalinity is closely analogous to measured alkalinity and presents few practical interpretation problems. Theoretically defined “CO2- acidity” is closely related to most standard titration methods used for mine drainage with an endpoint pH of 8.3, but it presents numerous interpretation problems, and it is unfortunately named because CO2 is intentionally driven off during titration of mine-drainage samples. Using the proton condition/massaction approach and employing graphs for visualization, we explore the concept of principal components and how to assign acidity contributions to solution species, including aqueous complexes, commonly found in mine drainage. We define a comprehensive theoretical definition of acidity in mine drainage on the basis of aqueous speciation at the sample pH and the capacity of these species to undergo hydrolysis to pH 8.3. This definition indicates the computed acidity in milligrams per liter (mg L-1 ) as CaCO3 (based on pH and analytical concentrations of dissolved FeIII , FeII , Mn, and Al in mg L-1 ): Aciditycomputed = 50. (10(3-pH) + 3.CFeIII/55.8 + 2.CFeII/55.8 + 2.CMn/54.9 + 3.CAl/27.0) underestimates contributions from HSO4 - and H+ , but overestimates the acidity due to Fe3+. These errors tend to approximately cancel each other. We demonstrate that “net alkalinity” is a valid mathematical construction based on theoretical definitions of alkalinity and acidity. We demonstrate that, for most mine-drainage solutions, a

Final Environmental Impact Statement to construct and operate the Crownpoint Uranium Solution Mining Project, Crownpoint, New Mexico

International Nuclear Information System (INIS)

1997-02-01

This Final Environmental Impact Statement (FEIS) addresses the proposed action of issuing a combined source and 11e(2) byproduct material license and minerals operating leases for Federal and Indian lands to Hydro Resources, Inc. (HRI). This action would authorize HRI to conduct in-situ leach uranium mining in McKinley County, New Mexico. Such mining would involve drilling wells to access the ore bodies, then recirculating groundwater with added oxygen to mobilize uranium found in the ore. Uranium would then be removed from the solution using ion exchange technology in processing plants located at three separate sites. As proposed by HRI, a central plant would provide drying and packaging equipment for the entire project. The Draft Environmental Impact Statement (DEIS) for the proposed action was prepared by an interagency review group comprising staff from the Nuclear Regulatory Commission, the Bureau of Indian Affairs, and the Bureau of Land Management, and published in October 1994. After evaluating the environmental impacts of the proposed action in the DEIS, the reviewing agencies concluded that the appropriate action was to issue the requested license and proposed leases authorizing HRI to proceed with the project. This FEIS reevaluates the proposed licensing action on the basis of written and oral comments received on the DEIS and on additional information obtained in 1995 and 1996. The FEIS describes and evaluates (1) the purpose of and need for the proposed action, (2) alternatives to the proposed action, (3) the environmental resources that could be affected by the proposed action and alternatives, (4) the potential environmental consequences of the proposed action and alternatives, and (5) the economic costs and benefits associated with the proposed action. Based on this assessment, the FEIS makes recommendations concerning the requested license and proposed leases

MINING OPERATIONS'' SAFETY PROVISION - FUNDAMENTAL AND APPLIED SCIENCE TASK

Directory of Open Access Journals (Sweden)

Zakharov V.N.

2017-12-01

Full Text Available The stages of the modern Russian scientiic school of comprehensive exploitation of mineral resourcesformation, the main directions of which were concentrated in the Institute of Comprehensive Exploitation of Mineral Resources are considered. The main directions of ICEMR scientiic activity and the most important results of fundamental and applied research are presented, which are the scientiic Ьasis of modern research related to the safety of mineral reserves use provision. The importance of studying the coal and methane interaction, gas dynamic phenomena in coal mines, coal seam degassing technologies and mine methane utilization, mathematical modeling and solving proЬlems in the ield of stressed-deformed state, strength, fracturing mechanics, thermal conductivity, hydromechanics, forced viЬration, etc. are outlined.The effectiveness analysis of the state, academic and industrial Ьranch scientiic centers, university science, design organizations and mining companies joint efforts to reduce industrial injuries in the mining sector of the Russian economy is conducted. The need for targeted measures to move to new technical-technological and regulatory levels of mining, allowing to prevent the accidents with massive fatal injuries, was determined. The solution of these tasks is possiЬle only Ьy comЬining the efforts of the specialized institutes of the Russian Academy of Sciences, of the Ьranch science, of universities and mining companies through the implementation of the "Mining Safety" Scientiic Research Comprehensive Plan, coordinated Ьy ICEMR RAS.

Economics of mining law

Science.gov (United States)

Long, K.R.

1995-01-01

Modern mining law, by facilitating socially and environmentally acceptable exploration, development, and production of mineral materials, helps secure the benefits of mineral production while minimizing environmental harm and accounting for increasing land-use competition. Mining investments are sunk costs, irreversibly tied to a particular mineral site, and require many years to recoup. Providing security of tenure is the most critical element of a practical mining law. Governments owning mineral rights have a conflict of interest between their roles as a profit-maximizing landowner and as a guardian of public welfare. As a monopoly supplier, governments have considerable power to manipulate mineral-rights markets. To avoid monopoly rent-seeking by governments, a competitive market for government-owned mineral rights must be created by artifice. What mining firms will pay for mineral rights depends on expected exploration success and extraction costs. Landowners and mining firms will negotlate respective shares of anticipated differential rents, usually allowing for some form of risk sharing. Private landowners do not normally account for external benefits or costs of minerals use. Government ownership of mineral rights allows for direct accounting of social prices for mineral-bearing lands and external costs. An equitable and efficient method is to charge an appropriate reservation price for surface land use, net of the value of land after reclamation, and to recover all or part of differential rents through a flat income or resource-rent tax. The traditional royalty on gross value of production, essentially a regressive income tax, cannot recover as much rent as a flat income tax, causes arbitrary mineral-reserve sterilization, and creates a bias toward development on the extensive margin where marginal environmental costs are higher. Mitigating environmental costs and resolving land-use conflicts require local evaluation and planning. National oversight ensures

Data Mining Web Services for Science Data Repositories

Science.gov (United States)

Graves, S.; Ramachandran, R.; Keiser, K.; Maskey, M.; Lynnes, C.; Pham, L.

2006-12-01

The maturation of web services standards and technologies sets the stage for a distributed "Service-Oriented Architecture" (SOA) for NASA's next generation science data processing. This architecture will allow members of the scientific community to create and combine persistent distributed data processing services and make them available to other users over the Internet. NASA has initiated a project to create a suite of specialized data mining web services designed specifically for science data. The project leverages the Algorithm Development and Mining (ADaM) toolkit as its basis. The ADaM toolkit is a robust, mature and freely available science data mining toolkit that is being used by several research organizations and educational institutions worldwide. These mining services will give the scientific community a powerful and versatile data mining capability that can be used to create higher order products such as thematic maps from current and future NASA satellite data records with methods that are not currently available. The package of mining and related services are being developed using Web Services standards so that community-based measurement processing systems can access and interoperate with them. These standards-based services allow users different options for utilizing them, from direct remote invocation by a client application to deployment of a Business Process Execution Language (BPEL) solutions package where a complex data mining workflow is exposed to others as a single service. The ability to deploy and operate these services at a data archive allows the data mining algorithms to be run where the data are stored, a more efficient scenario than moving large amounts of data over the network. This will be demonstrated in a scenario in which a user uses a remote Web-Service-enabled clustering algorithm to create cloud masks from satellite imagery at the Goddard Earth Sciences Data and Information Services Center (GES DISC).

Treatment of mine-water from decommissioning uranium mines

International Nuclear Information System (INIS)

Fan Quanhui

2002-01-01

Treatment methods for mine-water from decommissioning uranium mines are introduced and classified. The suggestions on optimal treatment methods are presented as a matter of experience with decommissioned Chenzhou Uranium Mine

Knowledge-Based Reinforcement Learning for Data Mining

Science.gov (United States)

Kudenko, Daniel; Grzes, Marek

Data Mining is the process of extracting patterns from data. Two general avenues of research in the intersecting areas of agents and data mining can be distinguished. The first approach is concerned with mining an agent’s observation data in order to extract patterns, categorize environment states, and/or make predictions of future states. In this setting, data is normally available as a batch, and the agent’s actions and goals are often independent of the data mining task. The data collection is mainly considered as a side effect of the agent’s activities. Machine learning techniques applied in such situations fall into the class of supervised learning. In contrast, the second scenario occurs where an agent is actively performing the data mining, and is responsible for the data collection itself. For example, a mobile network agent is acquiring and processing data (where the acquisition may incur a certain cost), or a mobile sensor agent is moving in a (perhaps hostile) environment, collecting and processing sensor readings. In these settings, the tasks of the agent and the data mining are highly intertwined and interdependent (or even identical). Supervised learning is not a suitable technique for these cases. Reinforcement Learning (RL) enables an agent to learn from experience (in form of reward and punishment for explorative actions) and adapt to new situations, without a teacher. RL is an ideal learning technique for these data mining scenarios, because it fits the agent paradigm of continuous sensing and acting, and the RL agent is able to learn to make decisions on the sampling of the environment which provides the data. Nevertheless, RL still suffers from scalability problems, which have prevented its successful use in many complex real-world domains. The more complex the tasks, the longer it takes a reinforcement learning algorithm to converge to a good solution. For many real-world tasks, human expert knowledge is available. For example, human

International developments in uranium mining and mill site remediation

International Nuclear Information System (INIS)

Quarch, H.; Kuhlmann, J.; Daroussin, J.L.; Poyser, R.W.

1993-01-01

At the end of production, mine sites, mill sites, tailings ponds, heap leaching residues in uranium mining districts world-wide have to be remediated in a responsible and sustainable manner in order to minimize long term environmental impacts. Current practice, regulatory environments and rehabilitation objectives in some of the most important uranium producing countries are briefly characterized as well as applicable radioprotection and geotechnical criteria. Important local and regional variables are outlined which determine optimal site specific solutions. Examples from Europe and North America are shown. Monitoring and control requirements as well as areas of current and necessary research and development are identified

30 CFR 77.1712 - Reopening mines; notification; inspection prior to mining.

Science.gov (United States)

2010-07-01

... to mining. 77.1712 Section 77.1712 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... prior to mining. Prior to reopening any surface coal mine after it has been abandoned or declared... an authorized representative of the Secretary before any mining operations in such mine are...

Acid mine drainage: mining and water pollution issues in British Columbia

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

The importance of protecting water quality and some of the problems associated with mineral development are described. Negative impacts of mining operations such as sedimentation, water disturbances, and water pollution from waste rock and tailings are considered. Mining wastes, types of water pollution from mining, the legacy of acid mine drainage, predicting acid mine drainage, preventing and mitigating acid mine drainage, examples from the past, and cyanide heap-leaching are discussed. The real costs of mining at the Telkwa open pit coal mine are assessed. British Columbia mines that are known for or are potentially acid generating are shown on a map. 32 refs., 10 figs.

Responsible Mining: A Human Resources Strategy for Mine Development Project

OpenAIRE

Sampathkumar, Sriram (Ram)

2012-01-01

Mining is a global industry. Most mining companies operate internationally, often in remote, challenging environments and consequently frequently have respond to unusual and demanding Human Resource (HR) requirements. It is my opinion that the strategic imperative behind success in mining industry is responsible mining. The purpose of this paper is to examine how an effective HR strategy can be a competitive advantage that contributes to the success of a mining project in the global mining in...

Hydrogeochemistry and microbiology of mine drainage: An update

Science.gov (United States)

Nordstrom, D. Kirk; Blowes, D.W; Ptacek, C.J.

2015-01-01

The extraction of mineral resources requires access through underground workings, or open pit operations, or through drillholes for solution mining. Additionally, mineral processing can generate large quantities of waste, including mill tailings, waste rock and refinery wastes, heap leach pads, and slag. Thus, through mining and mineral processing activities, large surface areas of sulfide minerals can be exposed to oxygen, water, and microbes, resulting in accelerated oxidation of sulfide and other minerals and the potential for the generation of low-quality drainage. The oxidation of sulfide minerals in mine wastes is accelerated by microbial catalysis of the oxidation of aqueous ferrous iron and sulfide. These reactions, particularly when combined with evaporation, can lead to extremely acidic drainage and very high concentrations of dissolved constituents. Although acid mine drainage is the most prevalent and damaging environmental concern associated with mining activities, generation of saline, basic and neutral drainage containing elevated concentrations of dissolved metals, non-metals, and metalloids has recently been recognized as a potential environmental concern. Acid neutralization reactions through the dissolution of carbonate, hydroxide, and silicate minerals and formation of secondary aluminum and ferric hydroxide phases can moderate the effects of acid generation and enhance the formation of secondary hydrated iron and aluminum minerals which may lessen the concentration of dissolved metals. Numerical models provide powerful tools for assessing impacts of these reactions on water quality.

The Northern Manitoba Mining Academy

Science.gov (United States)

Alexandre, Paul

2017-04-01

The Northern Manitoba Mining Academy (NMMA, miningacademy.ca) is a new educational institution located in Flin Flon, Manitoba. It is associated with the University College of the North and is specifically intended to serve the needs of the Northern Manitoban communities with regards to job creation by providing training in a variety of mining, construction, and exploration related areas. NMMA's mission is to provide innovative and responsible solutions for the creation of a knowledgeable, skilled, and sustainable workforce within a vibrant, mineral-rich resource industry. It facilitates strategic training initiatives and research activities in order to strengthen the social, economic, and environmental benefits of a robust mining and resources sector. In terms of education, NMMA offers its own programs, mostly short courses in health and safety, courses organized by the University College of the North (wilderness safety, prospecting, and exploration), and courses organized in association with provincial Industries-Based Safety Programs and Associations (a variety of construction-related trades). However, the programming is not limited to those courses already on the syllabus: the Academy operates on open-doors policy and welcomes people with their unique and diverse needs; it prides itself in its ability to tailor or create specific on-demand courses and deliver them locally in the North. The Northern Manitoba Mining Academy also provides access to its world-class facilities for field-based undergraduate courses, as well as graduate students and researchers doing field work. Full sample preparation facilities are offered to students and scientists in all natural and environmental sciences.

Foundations for technical solutions in organizing excavation of open ore pits

Directory of Open Access Journals (Sweden)

С. И. Фомин

2016-11-01

Full Text Available To study stochastic mining technical systems of opencast mines, where parallel to clearly defined values random and indefinite factors operate, probabilistic and statistical techniques are mostly used nowadays. Formally, the task of producing a design solution may, under the conditions of indeterminacy be transformed into an equivalent deterministic problem formulated for a risky situation. Uncertainty in the initial mining, geological and technical-economic information available during the design stage may result in changing the principal output characteristics of the opencast mine and undermine its operational efficiency during its exploitation. Lowering the possible economic losses is then possible via designing a stable technological  system. To minimize the degree of indeterminacy one first of all needs to identify the area of potential risk, define the probability of its emergence and assess its potential consequences. In case such consequences may be precluded, a clearer more complete understanding of the problem would promote a better thought through reaction to potential risk in the course of implementing design solutions.

Extending mine life

International Nuclear Information System (INIS)

Anon.

1984-01-01

Mine layouts, new machines and techniques, research into problem areas of ground control and so on, are highlighted in this report on extending mine life. The main resources taken into account are coal mining, uranium mining, molybdenum and gold mining

Data mining in soft computing framework: a survey.

Science.gov (United States)

Mitra, S; Pal, S K; Mitra, P

2002-01-01

The present article provides a survey of the available literature on data mining using soft computing. A categorization has been provided based on the different soft computing tools and their hybridizations used, the data mining function implemented, and the preference criterion selected by the model. The utility of the different soft computing methodologies is highlighted. Generally fuzzy sets are suitable for handling the issues related to understandability of patterns, incomplete/noisy data, mixed media information and human interaction, and can provide approximate solutions faster. Neural networks are nonparametric, robust, and exhibit good learning and generalization capabilities in data-rich environments. Genetic algorithms provide efficient search algorithms to select a model, from mixed media data, based on some preference criterion/objective function. Rough sets are suitable for handling different types of uncertainty in data. Some challenges to data mining and the application of soft computing methodologies are indicated. An extensive bibliography is also included.

Radioactivity in groundwater associated with uranium and phosphate mining and processing

International Nuclear Information System (INIS)

Kaufmann, R.F.

1981-01-01

From 1975 to 1980 USEPA investigations of the uranium and phosphate mining and milling industries addressed associated changes in the radionuclide content of nearby water resources. Available data for 226 Ra in central Florida aquifers show no significant difference in phosphate mineralized vs. nonmineralized areas. Apparently neither mineralization nor the industry cause significant increase in the Ra content of groundwater. Uranium mining and milling in a number of Western States (e.g. New Mexico, Wyoming, Colorado, Washington) cause locally increased levels of U, Ra and Th in shallow groundwater, but potable water supplies have not been adversely affected. Contamination of deep aquifers does not appear to occur, although elevated levels of Ra and U are present in many mine water discharges as a result of ore body oxidation and leaching. Model underground and surface U mines were used to evaluate chemical loading of 238 U, 226 Ra, 210 Pb and 210 Po to local and regional hydrographic units. Infiltration of mine water to potable groundwater and suspension/solution of contaminants in flood water constitute the principal elements of the aqueous pathway

Effects of uranium mining discharges on water quality in the Puerco River basin, Arizona and New Mexico

Science.gov (United States)

Van Metre, P.C.; Gray, J.R.

1992-01-01

From 1967 until 1986, uranium mine dewatering increased dissolved gross alpha, gross beta, uranium and radium activities and dissolved selenium and molybdenum concentrations in the Puerco River as indicated by time trends, areal patterns involving distance from the mines and stream discharge. Additionally, increased dissolved uranium concentrations were identified in groundwater under the Puerco River from where mine discharges entered the river to approximately the Arizona-New Mexico State line about 65 km downstream. Total mass of uranium and gross alpha activity released to the Puerco River by mine dewatering were estimated as 560 Mg (560 × 106 g) and 260 Ci, respectively. In comparison, a uranium mill tailings pond spill on 16 July 1979, released an estimated 1.5 Mg of uranium and 46 Ci of gross alpha activity. Mass balance calculations for alluvial ground water indicate that most of the uranium released did not remain in solution. Sorption of uranium on sediments and uptake of uranium by plants probably removed the uranium from solution.

Influence of the Haizhou Open Pit Coal Mine on the atmospheric flow over Fuxin, China.

Science.gov (United States)

Chen, He; Yang, Zhi-Feng; Wang, Xuan

2004-01-01

The influence of the Haizhou Open Pit Mine on the atmospheric flow in nearby Fuxin City in China was analyzed with the aid of the steady-state Navier-Stokes equations. The finite element method was used to obtain numerical solutions to these equations. The results showed that the Haizhou Open Pit Coal Mine contributes to the turbulent flow in the Fuxin City and its surroundings. However, when compared with the climatic effects, the open pit mine has a relatively small impact on the atmospheric flow over Fuxin.

Coal mine safety achievements in the USA and the contribution of NIOSH research

Energy Technology Data Exchange (ETDEWEB)

Esterhuizen, G.S.; Gurtunca, R.G. [NIOSH, Washington, DC (United States)

2006-12-15

Over the past century coal miner safety and health have seen tremendous improvements: the fatality and injury rates continue to decrease while productivity continues to increase. Many of the hazards that plagued miners in the past, such as coal bumps, methane and coal dust explosions, ground fall accidents and health issues have been significantly reduced. The contribution of NIOSH research includes products for prevention and survival of mine fires, methane control measures, design procedure for underground coal mines, methods for excavation surface controls, methods and procedures for blasting, laser usage in underground mines and prevention of electrocution from overhead power lines that have reduced accidents and injuries in underground coal mines. Health research has produced products such as the personal dust monitor, noise abating technologies and ergonomic solutions for equipment operators. Research priorities at NIOSH are set by considering surveillance statistics, stakeholder inputs and loss control principles. Future research in coal mining is directed towards respiratory diseases, noise-induced hearing loss, repetitive musculoskeletal injuries, traumatic injuries, falls of ground and mine disasters. The recent spate of accidents in coal mines resulted in the Miner Act of 2006, which includes a specific role for NIOSH in future mine safety research and development. The mine safety achievements in the USA reflect the commitment of industry, labour, government and research organizations to improving the safety of the mine worker.

Remediation of acid mine drainage using magnesite and its bentonite clay composite

CSIR Research Space (South Africa)

Masindi, Vhahangwele

2015-12-01

Full Text Available .............................. 46 Table 3.1: Synthetic acid mine drainage used in this study .................................................. 73 Table 3.2: Chemical compositions of acid mine drainage before and after contacting magnesite.... The reaction of AMD with magnesite at an optimum solid: liquid ratio of 1:100 and contact time of 60 min led to an increase in pH, reaching a maximum pH of 10, resulting in significant precipitation of most metal species. Increase of pH in solution...

Mechanics of granular-frictional-visco-plastic fluids in civil and mining engineering

Science.gov (United States)

Alehossein, H.; Qin, Z.

2013-10-01

The shear stress generated in mine backfill slurries and fresh concrete contains both velocity gradient dependent and frictional terms, categorised as frictional viscous plastic fluids. This paper discusses application of the developed analytical solution for flow rate as a function of pressure and pressure gradient in discs, pipes and cones for such frictional Bingham-Herschel-Bulkley fluids. This paper discusses application of this continuum fluid model to industrial materials like mine and mineral slurries, backfills and fresh concrete tests.

MONITORING OF MINING

Directory of Open Access Journals (Sweden)

Berislav Šebečić

1996-12-01

Full Text Available The way mining was monitored in the past depended on knowledge, interest and the existing legal regulations. Documentary evidence about this work can be found in archives, libraries and museums. In particular, there is the rich archival material (papers and books concerning the work of the one-time Imperial and Royal Mining Captaincies in Zagreb, Zadar, Klagenfurt and Split, A minor part of the documentation has not yet been transferred to Croatia. From mining handbooks and books we can also find out about mining in Croatia. In the context of Austro-Hungary. For example, we can find out that the first governorships in Zagreb and Zadar headed the Ban, Count Jelacic and Baron Mamula were also the top mining authorities, though this, probably from political motives, was suppressed in the guides and inventories or the Mining Captaincies. At the end of the 1850s, Croatia produced 92-94% of sea salt, up to 8.5% of sulphur, 19.5% of asphalt and 100% of oil for the Austro-Hungarian empire. From data about mining in the Split Mining Captaincy, prepared for the Philadephia Exhibition, it can be seen that in the exploratory mining operations in which there were 33,372 independent mines declared in 1925 they were looking mainly for bauxite (60,0%, then dark coal (19,0%, asphalts (10.3% and lignites (62%. In 1931, within the area covered by the same captaincy, of 74 declared mines, only 9 were working. There were five coal mines, three bauxite mines and one for asphalt. I suggest that within state institution, the Mining Captaincy or Authority be renewed, or that a Mining and Geological Authority be set ap, which would lead to the more complete affirmation of Croatian mining (the paper is published in Croatian.

Towards a negotiated solution to conflicts between large-scale and small-scale miners? The Acupan contract mining project in the Philippines

NARCIS (Netherlands)

Verbrugge, B.L.P.

2017-01-01

Recent decades have witnessed a simultaneous expansion of large-scale mining and artisanal and small-scale mining (ASM). In an increasing number of instances, ASM-operators and mining companies are competing or even clashing over access to mineral deposits. A growing number of experts are now

Testing Dust Control Preparation with Respect to Mine Employee Exposure to Inhalling Chemical Agents

Directory of Open Access Journals (Sweden)

Eugeniusz Orszulik

2013-01-01

Full Text Available This paper presents the results of tests used in dust hazard prevention for air-water spraying devices in collieries. The purpose of the tests was to evaluate mine employees’ exposure to inhalling chemical agents when the ZWILKOP ZW-10 preparation is used. The paper presents the results of the measurements of concentration, in a mine atmosphere, of the following chemical agents: hazardous substances 2-(2-butoxyethoxyethanol and 2-ethylhexan-1-ol, constituting ingredients of the preparation at mine employees’ workstations. The tests were performed during work related to the mining of coal in inclined drift C31, seam 415/1-2 on the premises of “Borynia-Zofiówka-Jastrzębie” Hard Coal Mine, Jastrzębie-Zdrój, Poland, using the TELESTO mist systems. Using aqueous solutions for the preparation at concentrations of 15 and 20‰ causes no exceedance of the allowable mine air concentrations for the chemical agents tested.

Application of nanofiltration to the treatment of acid mine drainage waters

International Nuclear Information System (INIS)

Bastos, Edna T.R.; Barbosa, Celina C.R.; Oliveira, Elizabeth E.M.; Carvalho, Leonel M. de; Pedro Junior, Antonio; Queiroz, Vanessa B.C. de

2009-01-01

This study investigated the separation of uranium and other elements in high concentrations from acid mine waters at Caldas Uranium Mining, in the southeast of Brazil, using nanofiltration membranes. Nanofiltrarion is widely used in water treatment due to the lower energy requirements and higher yields than reverse osmosis. Separation characteristics are dependent on both the molecular size and charge of the dissolved species in the feed solution as well as membrane properties. In this investigation the potential of nanofiltration to removed dissolved species like uranium from acid mine water drainage was measured. Two composite aromatic polyamide commercially membranes of FilmTec/Dow were tested and it found that uranium rejections of greater than 90% and also showed potential for the separation of aluminum and manganese. (author)

Fluorescent halite from Bochnia salt mine, Poland

Science.gov (United States)

Waluś, Edyta; Głąbińska, Dobrochna; Puławska, Aleksandra; Flasza, Michał; Manecki, Maciej

2016-04-01

The photoluminescence of selected halite crystals from Bochnia Salt Mine (Bochnia, Poland) were discovered in 2014. This is a result of contemporary precipitation from percolating waters. In most cases the fluorescence is observed in whole crystals or in zones of crystals. Only clear parts of transparent crystals are orange-red fluorescent in short UV light (320 nm). Chemical microanalysis by scanning electron microscopy/energy dispersive spectroscopy SEM/EDS indicates that this is activated by Mn and Pb. The concentration of Mn is similar in fluorescent and inactive salt and equals to 0.13 - 0.27 wt.%. The concentration of Pb, however, averages to 3.8 wt.% in fluorescent parts reaching only 1.9 wt.% elsewhere. There is no difference in the unit cell parameters determined by powder X-ray diffraction. The percolating waters contain some Mn (ca. 3.9 ppm) but the concentration of Pb is below the detection limits. The experiments of precipitation of halite from the solutions containing various concentrations of Mn and Pb were performed to simulate this fenomenon using solutions containing: 1 mg Pb/L and 80 mg Mn/L; 1 mg Pb/L and 0.8 mg Mn/L; 1 mg Pb/L and 0.6 mg Mn/L; and 0 mg Pb/L and 80 mg Mn/L. The results indicate that fluorescence is apparent when halite forms from solutions containing more than 0.8 mg Mn/L and more than 1 mg Pb/L. The presence of lead as co-activator is necessary requirement: Mn alone does not activate the fluorescence of halite. This is in accordance with the results of previous work (Murata et al., 1946; Sidike et al., 2002). Rock salt in the mine does not show fluorescence at all. Fluorescence of contemporary salt in Bochnia salt mine is a result of mining activity and slight, sporadic contamination with traces of Mn and Pb. This work is partially funded by AGH research grant no 11.11.140.319. Murata K. J., Smith R. L., 1946. Manganese and lead as coactivators of red fluorescence in halite, American Mineralogist, Volume 31, pages 527

Gold-Mining

DEFF Research Database (Denmark)

Raaballe, J.; Grundy, B.D.

2002-01-01

  Based on standard option pricing arguments and assumptions (including no convenience yield and sustainable property rights), we will not observe operating gold mines. We find that asymmetric information on the reserves in the gold mine is a necessary and sufficient condition for the existence...... of operating gold mines. Asymmetric information on the reserves in the mine implies that, at a high enough price of gold, the manager of high type finds the extraction value of the company to be higher than the current market value of the non-operating gold mine. Due to this under valuation the maxim of market...

The mining methods at the Fraisse mine

International Nuclear Information System (INIS)

Heurley, P.; Vervialle, J.P.

1985-01-01

The Fraisse mine is one of the four underground mines of the La Crouzille mining divisions of Cogema. Faced with the necessity to mechanize its workings, this mine also had to satisfy a certain number of stringent demands. This has led to concept of four different mining methods for the four workings at present in active operation at this pit, which nevertheless preserve the basic ideas of the methods of top slicing under concrete slabs (TSS) or horizontal cut-and-fill stopes (CFS). An electric scooptram is utilized. With this type of vehicle the stringent demands for the introduction of means for fire fighting and prevention are reduced to a minimum. Finally, the dimensions of the vehicles and the operation of these methods result in a net-to-gross tonnages of close to 1, i.e. a maximum output, combined with a minimum of contamination [fr

Aquifer restoration at in-situ leach uranium mines: evidence for natural restoration processes

International Nuclear Information System (INIS)

Deutsch, W.J.; Serne, R.J.; Bell, N.E.; Martin, W.J.

1983-04-01

Pacific Northwest Laboratory conducted experiments with aquifer sediments and leaching solution (lixiviant) from an in-situ leach uranium mine. The data from these laboratory experiments and information on the normal distribution of elements associated with roll-front uranium deposits provide evidence that natural processes can enhance restoration of aquifers affected by leach mining. Our experiments show that the concentration of uranium (U) in solution can decrease at least an order of magnitude (from 50 to less than 5 ppM U) due to reactions between the lixiviant and sediment, and that a uranium solid, possibly amorphous uranium dioxide, (UO 2 ), can limit the concentration of uranium in a solution in contact with reduced sediment. The concentrations of As, Se, and Mo in an oxidizing lixiviant should also decrease as a result of redox and precipitation reactions between the solution and sediment. The lixiviant concentrations of major anions (chloride and sulfate) other than carbonate were not affected by short-term (less than one week) contact with the aquifer sediments. This is also true of the total dissolved solids level of the solution. Consequently, we recommend that these solution parameters be used as indicators of an excursion of leaching solution from the leach field. Our experiments have shown that natural aquifer processes can affect the solution concentration of certain constituents. This effect should be considered when guidelines for aquifer restoration are established

Mined-out land

International Nuclear Information System (INIS)

Reinsalu, Enno; Toomik, Arvi; Valgma, Ingo

2002-01-01

Estonian mineral resources are deposited in low depth and mining fields are large, therefore vast areas are affected by mining. There are at least 800 deposits with total area of 6,000 km 2 and about the same number of underground mines, surface mines, peat fields, quarries, and sand and gravel pits. The deposits cover more than 10% of Estonian mainland. The total area of operating mine claims exceeds 150 km 2 that makes 0.3 % of Estonian area. The book is written mainly for the people who are living or acting in the area influenced by mining. The observations and research could benefit those who are interested in geography and environment, who follow formation and look of mined-out landscapes. The book contains also warnings for careless people on and under the surface of the mined-out land. Part of the book contains results of the research made in 1968-1993 by the first two authors working at the Estonian branch of A.Skochinsky Institute of Mining. Since 1990, Arvi Toomik continued this study at the Northeastern section of the Institute of Ecology of Tallinn Pedagogical University. Enno Reinsalu studied aftereffects of mining at the Mining Department of Tallinn Technical University from 1998 to 2000. Geographical Information System for Mining was studied by Ingo Valgma within his doctoral dissertation, and this book is one of the applications of his study

Green remediation of tailings from the mine using inorganic agents

Directory of Open Access Journals (Sweden)

Došić Aleksandar D.

2017-01-01

Full Text Available Increasing amounts of residues and waste materials coming from industrial activities in different processes have become an increasingly urgent problem for the future. The paper presents the problem of mine tailings generated in mine “Sase” (Republic of Srpska, Bosnia and Herzegovina with high metal content (Pb, Cu and Zn. Dumpsite of this tailing represents potential risk for water bodies in the vicinity of this location. Chosen treatment process was stabilization/solidification (S/S. Inorganic agents used in this study were fly ash and red mud that represent secondary industrial waste generated on locations relatively near the mine. Therefore, their application can be used as an example of a sustainable solution of regional environmental problem. Further investigations are related to the impact of various factors on metals leaching from mine tailings solidified/stabilized material using the above mentioned immobilization agents. The performance of the immobilizing procedures was examined using several leaching tests: ANS 16.1, TCLP, DIN, MWLP. The results indicated that all S/S samples can be considered as non-hazardous waste, as all leached metal concentrations met the set criteria. These results will further enable the modelling of metals behaviour during long-term leaching from treated mine tailing. The data are invaluable in terms of economically and environmentally sound management of mine tailing.

Model for predicting the restoration of and ammonium migration from in situ mine sites

International Nuclear Information System (INIS)

Anon.

1979-01-01

There are many uranium deposits which are too deep, too poor in quality or too small in extent to be economically strip mined. It now appears that this uranium can be mined using in situ leaching processes. One component of the lixiviant is necessarily a cation and, during the course of mining, the ion exchange sites of the minerals in the mine zone become saturated with this cation. Ammonium is the cation now commonly used. Clearly, any restoration procedure or question involving the rate of cation migration with the groundwater all necessarily involve the process of ion exchange coupled with flow in porous media. The equations describing this process are presented in this paper and numerical solutions obtained. 16 refs

Trust Mines

Science.gov (United States)

The United States and the Navajo Nation entered into settlement agreements that provide funds to conduct investigations and any needed cleanup at 16 of the 46 priority mines, including six mines in the Northern Abandoned Uranium Mine Region.

Web Mining

Science.gov (United States)

Fürnkranz, Johannes

The World-Wide Web provides every internet citizen with access to an abundance of information, but it becomes increasingly difficult to identify the relevant pieces of information. Research in web mining tries to address this problem by applying techniques from data mining and machine learning to Web data and documents. This chapter provides a brief overview of web mining techniques and research areas, most notably hypertext classification, wrapper induction, recommender systems and web usage mining.

Data mining, mining data : energy consumption modelling

Energy Technology Data Exchange (ETDEWEB)

Dessureault, S. [Arizona Univ., Tucson, AZ (United States)

2007-09-15

Most modern mining operations are accumulating large amounts of data on production and business processes. Data, however, provides value only if it can be translated into information that appropriate users can utilize. This paper emphasized that a new technological focus should emerge, notably how to concentrate data into information; analyze information sufficiently to become knowledge; and, act on that knowledge. Researchers at the Mining Information Systems and Operations Management (MISOM) laboratory at the University of Arizona have created a method to transform data into action. The data-to-action approach was exercised in the development of an energy consumption model (ECM), in partnership with a major US-based copper mining company, 2 software companies, and the MISOM laboratory. The approach begins by integrating several key data sources using data warehousing techniques, and increasing the existing level of integration and data cleaning. An online analytical processing (OLAP) cube was also created to investigate the data and identify a subset of several million records. Data mining algorithms were applied using the information that was isolated by the OLAP cube. The data mining results showed that traditional cost drivers of energy consumption are poor predictors. A comparison was made between traditional methods of predicting energy consumption and the prediction formed using data mining. Traditionally, in the mines for which data were available, monthly averages of tons and distance are used to predict diesel fuel consumption. However, this article showed that new information technology can be used to incorporate many more variables into the budgeting process, resulting in more accurate predictions. The ECM helped mine planners improve the prediction of energy use through more data integration, measure development, and workflow analysis. 5 refs., 11 figs.

Mining with communities

International Nuclear Information System (INIS)

Veiga, Marcello M.; Scoble, Malcolm; McAllister, Mary Louise

2001-01-01

To be considered as sustainable, a mining community needs to adhere to the principles of ecological sustainability, economic vitality and social equity. These principles apply over a long time span, covering both the life of the mine and post-mining closure. The legacy left by a mine to the community after its closure is emerging as a significant aspect of its planning. Progress towards sustainability is made when value is added to a community with respect to these principles by the mining operation during its life cycle. This article presents a series of cases to demonstrate the diverse potential challenges to achieving a sustainable mining community. These case studies of both new and old mining communities are drawn mainly from Canada and from locations abroad where Canadian companies are now building mines. The article concludes by considering various approaches that can foster sustainable mining communities and the role of community consultation and capacity building. (author)

Ideate about building green mine of uranium mining and metallurgy

International Nuclear Information System (INIS)

Shi Zuyuan

2012-01-01

Analysing the current situation of uranium mining and metallurgy; Setting up goals for green uranium mining and metallurgy, its fundamental conditions, Contents and measures. Putting forward an idea to combine green uranium mining and metallurgy with the state target for green mining, and keeping its own characteristics. (author)

Social big data mining

CERN Document Server

Ishikawa, Hiroshi

2015-01-01

Social Media. Big Data and Social Data. Hypotheses in the Era of Big Data. Social Big Data Applications. Basic Concepts in Data Mining. Association Rule Mining. Clustering. Classification. Prediction. Web Structure Mining. Web Content Mining. Web Access Log Mining, Information Extraction and Deep Web Mining. Media Mining. Scalability and Outlier Detection.

Mining and mining authorities in Saarland 2016. Mining economy, mining technology, occupational safety, environmental protection, statistics, mining authority activities. Annual report; Bergbau und Bergbehoerden im Saarland 2016. Bergwirtschaft, Bergtechnik, Arbeitsschutz, Umweltschutz, Statistiken, Taetigkeiten der Bergbehoerden. Jahresbericht

Energy Technology Data Exchange (ETDEWEB)

NONE

2016-07-01

The annual report of the Saarland Upper Mining Authority provides an insight into the activities of mining authorities. Especially, the development of the black coal mining, safety and technology of mining as well as the correlation between mining and environment are stressed.

Optimal synthesis of energy supply systems for remote open pit mines

International Nuclear Information System (INIS)

Carvalho, M.; Romero, A.; Shields, G.; Millar, D.L.

2014-01-01

electricity and syngas storage and diesel and biomass bunkering. Within the paper the energy demands for a remote, open pit mining operation located in Northern Ontario are considered as a case study to illustrate the technique and investigations. As expected, for mines close to electricity, natural gas, and diesel distribution infrastructures, the optimal choice is to connect. When a constraint is applied specifying that connection is not possible, as would be for the case exemplified, the optimal choice includes some of the more exotic options for mine site energy supply. - Highlights: •Optimal mine site energy supply methodology is established. •Methodology permits innovative, lower cost, energy supply solutions to be identified. •The methodology allows for electricity and syngas storage and diesel and biomass bunkering. •A remote, open pit mining operation located in Northern Ontario is considered as a case study. •The optimal solution includes some of the more exotic options for mine site energy supply

Environmental and economic assessment of hybrid FO-RO/NF system with selected inorganic draw solutes for the treatment of mine impaired water

KAUST Repository

Kim, Jung Eun

2018-01-01

A hybrid forward osmosis (FO) and reverse osmosis (RO)/nanofiltration (NF) system in a closed-loop operation with selected draw solutes was evaluated to treat coal mine impaired water. This study provides an insight of selecting the most suitable draw solution (DS) by conducting environmental and economic life cycle assessment (LCA). Baseline environmental LCA showed that the dominant components to energy use and global warming are the DS recovery processes (i.e. RO or NF processes) and FO membrane materials, respectively. When considering the DS replenishment in FO, the contribution of chemical use to the overall global warming impact was significant for all hybrid systems. Furthermore, from an environmental perspective, the FO-NF hybrid system with Na2SO4 shows the lowest energy consumption and global warming with additional considerations of final product water quality and FO brine disposal. From an economic perspective, the FO-NF with Na2SO4 showed the lowest total operating cost due to its lower DS loss and relatively low solute cost. In a closed-loop system, FO-NF with NaCl and Na2SO4 had the lowest total water cost at optimum NF recovery rates of 90 and 95%, respectively. FO-NF with Na2SO4 had the lowest environmental and economic impacts. Overall, draw solute performances and cost in FO and recovery rate in RO/NF play a crucial role in determining the total water cost and environmental impact of FO hybrid systems in a closed-loop operation.

75 FR 17529 - High-Voltage Continuous Mining Machine Standard for Underground Coal Mines

Science.gov (United States)

2010-04-06

... High-Voltage Continuous Mining Machine Standard for Underground Coal Mines AGENCY: Mine Safety and... of high-voltage continuous mining machines in underground coal mines. It also revises MSHA's design...-- Underground Coal Mines III. Section-by-Section Analysis A. Part 18--Electric Motor-Driven Mine Equipment and...

Monitoring Groundwater Storage Changes in the Loess Plateau Using GRACE Satellite Gravity Data, Hydrological Models and Coal Mining Data

Directory of Open Access Journals (Sweden)

Xiaowei Xie

2018-04-01

Full Text Available Monitoring the groundwater storage (GWS changes is crucial to the rational utilization of groundwater and to ecological restoration in the Loess Plateau of China, which is one of the regions with the most extreme ecological environmental damage in the world. In this region, the mass loss caused by coal mining can reach the level of billions of tons per year. For this reason, in this work, in addition to Gravity Recovery and Climate Experiment (GRACE satellite gravity data and hydrological models, coal mining data were also used to monitor GWS variation in the Loess Plateau during the period of 2005–2014. The GWS changes results from different GRACE solutions, that is, the spherical harmonics (SH solutions, mascon solutions, and Slepian solutions (which are the Slepian localization of SH solutions, were compared with in situ GWS changes, obtained from 136 groundwater observation wells, and the aim was to acquire the most robust GWS changes. The results showed that the GWS changes from mascon solutions (mascon-GWS match best with in situ GWS changes, showing the highest correlation coefficient, lowest root mean square error (RMSE values and nearest annual trend. Therefore, the Mascon-GWS changes are used for the spatial-temporal analysis of GWS changes. Based on which, the groundwater depletion rate of the Loess Plateau was −0.65 ± 0.07 cm/year from 2005–2014, with a more severe consumption rate occurring in its eastern region, reaching about −1.5 cm/year, which is several times greater than those of the other regions. Furthermore, the precipitation and coal mining data were used for analyzing the causes of the groundwater depletion: the results showed that seasonal changes in groundwater storage are closely related to rainfall, but the groundwater consumption is mainly due to human activities; coal mining in particular plays a major role in the serious groundwater consumption in eastern region of the study area. Our results will help in

Mine water treatment

Energy Technology Data Exchange (ETDEWEB)

Komissarov, S V

1980-10-01

This article discusses composition of chemical compounds dissolved or suspended in mine waters in various coal basins of the USSR: Moscow basin, Kuzbass, Pechora, Kizelovsk, Karaganda, Donetsk and Chelyabinsk basins. Percentage of suspended materials in water depending on water source (water from water drainage system of dust suppression system) is evaluated. Pollution of mine waters with oils and coli bacteria is also described. Recommendations on construction, capacity of water settling tanks, and methods of mine water treatment are presented. In mines where coal seams 2 m or thicker are mined a system of two settling tanks should be used: in the upper one large grains are settled, in the lower one finer grains. The upper tank should be large enough to store mine water discharged during one month, and the lower one to store water discharged over two months. Salty waters from coal mines mining thin coal seams should be treated in a system of water reservoirs from which water evaporates (if climatic conditions permit). Mine waters from mines with thin coal seams but without high salt content can be treated in a system of long channels with water plants, which increase amount of oxygen in treated water. System of biological treatment of waste waters from mine wash-houses and baths is also described. Influence of temperature, sunshine and season of the year on efficiency of mine water treatment is also assessed. (In Russian)

Internet technologies in the mining industry. Towards unattended mining systems

Energy Technology Data Exchange (ETDEWEB)

Krzykawski, Michal [FAMUR Group, Katowice (Poland)

2009-08-27

Global suppliers of longwall systems focus mainly on maximising the efficiency of the equipment they manufacture. Given the fact that, since 2004, coal demand on world markets has been constantly on the increase, even during an economic downturn, this endeavour seems fully justified. However, it should be remembered that maximum efficiency must be accompanied by maximum safety of all underground operations. This statement is based on the belief that the mining industry, which exploits increasingly deep and dangerous coal beds, faces the necessity to implement comprehensive IT systems for managing all mining processes and, in the near future, to use unmanned mining systems, fully controllable from the mine surface. The computerisation of mines is an indispensable element of the development of the world mining industry, a belief which has been put into practice with e-mine, developed by the FAMUR Group. (orig.)

Mine water pollution in Scotland. Nature, extent and preventative strategies

Energy Technology Data Exchange (ETDEWEB)

Younger, P.L. [Water Resource Systems Research Laboratory, Department of Civil Engineering, University of Newcastle, NE1 7RU Newcastle Upon Tyne (United Kingdom)

2001-01-29

Scotland was one of the world's first industrialised countries, and has therefore also been one of the first countries to experience wholesale post-industrial dereliction. Water pollution arising from abandoned mines, particularly abandoned coal mines, is second only to sewage as a source of freshwater pollution nation-wide, and in many coalfield catchments it is the pre-eminent source. Most of the pollution is due to net-alkaline ferruginous waters emerging from deep mines. Scrutiny of records from 80 deep mine discharges reveals that iron concentrations in these waters are only likely to exceed 20 mg/l, and the pH to be below 6.5, where the discharge emerges within 0.5 km of the outcrop of the shallowest mined seam. The bulk of mature near-outcrop mine water discharges in Scotland have<50 mg/l total Fe, and concentrations>100 mg/l are only likely where a marine bed lies within 25 m of the worked seam. Where the nearest marine bed is more than 80 m above or below the seam, then the total iron will be less than 4 mg/l, and in most cases less than 1 mg/l. Net-acidic mine waters are far more rare than net-alkaline waters in Scotland, and are most commonly associated with unreclaimed spoil heaps (bings). Both net-alkaline and net-acidic discharges have detrimental effects on the hydrochemistry and biological integrity of receiving waters. Scotland has recently pioneered the use of pre-emptive pump-and-treat solutions to prevent mine water pollution, and has also experienced the successful introduction of passive treatment technology for both abandoned and active workings.

Variabilité morphologique de Rosmarinus officinalis sur la mine de ...

African Journals Online (AJOL)

Myriam Majeri Gaïda

Heavy metals pollution is considered as one of the most dangerous environmental problems in agricultural soil, particularly neighboring mining sites. Phytoremediation based on green plants use seems to be an interesting biological solution to detoxify these soils. This study focuses especially on heavy metals effects on ...

Improving the energy efficiency of mine fan assemblages

International Nuclear Information System (INIS)

De Souza, Euler

2015-01-01

Energy associated with ventilating an underground operation comprises a significant portion of a mine operation's base energy demand and is consequently responsible for a large percentage of the total operating costs. Ventilation systems may account from 25 to 40% of the total energy costs and 40–50% of the energy consumption of a mine operation. Fans are the most important mechanical devices used to ventilate underground mines and the total fan power installed in a single mine operation can easily exceed 10,000 kW. Investigations of a number of mine main fan installations have determined their assemblage to be, in general, very energy inefficient. The author has found that 40–80% of the energy consumed by a main fan is used to overcome the resistance of fan assemblage components. This paper presents how engineering design principles can be applied to improve the performance and efficiency of fan installations, resulting in substantial reductions in power consumption, operating cost and greenhouse gas emissions. A detailed case study is presented to demonstrate that, by designing fan assemblages using proper engineering concepts of fluid physics and industrial ventilation design, main fan systems will operate at efficiencies well above 80–90% (compared to common operating efficiencies of between 20 and 65%), resulting in a drastic reduction in a mine's overall costs and base electrical and energy loads. - Highlights: • Increases in fan assemblage efficiencies with minimum capital investment. • Improved designs for substantial fan power and operating cost savings. • General solutions and tactics for improving existing main fan installations. • Case study presented to demonstrate proper design of fan assemblages.

Molybdenum and zinc stable isotope variation in mining waste rock drainage and waste rock at the Antamina mine, Peru

Energy Technology Data Exchange (ETDEWEB)

Skierszkan, E.K., E-mail: eskiersz@eos.ubc.ca [Department of Earth, Ocean and Atmospheric Sciences, University of British Columbia, 2020-2207 Main Mall, Vancouver V6T 1Z4 (Canada); Mayer, K.U. [Department of Earth, Ocean and Atmospheric Sciences, University of British Columbia, 2020-2207 Main Mall, Vancouver V6T 1Z4 (Canada); Weis, D. [Pacific Centre for Isotopic and Geochemical Research (PCIGR), Department of Earth, Ocean and Atmospheric Sciences, University of British Columbia, 2020-2207 Main Mall, Vancouver V6T 1Z4 (Canada); Beckie, R.D. [Department of Earth, Ocean and Atmospheric Sciences, University of British Columbia, 2020-2207 Main Mall, Vancouver V6T 1Z4 (Canada)

2016-04-15

of Mo and Zn isotope ratios to track the fate of these elements in mine drainage. - Highlights: • Metal stable isotopes are promising indicators of attenuation in mine drainage. • Mine water, waste rock and minerals were analyzed for Mo and Zn isotope ratios. • Molybdenites had a wide range of δ{sup 98}Mo, but sphalerites had invariant δ{sup 66}Zn. • Variations of 2.2‰ in δ{sup 98}Mo and 0.7‰ in δ{sup 66}Zn were measured in mine drainage. • Attenuation processes drive changes in δ{sup 66}Zn and δ{sup 98}Mo in solution.

Molybdenum and zinc stable isotope variation in mining waste rock drainage and waste rock at the Antamina mine, Peru

International Nuclear Information System (INIS)

Skierszkan, E.K.; Mayer, K.U.; Weis, D.; Beckie, R.D.

2016-01-01

of these elements in mine drainage. - Highlights: • Metal stable isotopes are promising indicators of attenuation in mine drainage. • Mine water, waste rock and minerals were analyzed for Mo and Zn isotope ratios. • Molybdenites had a wide range of δ"9"8Mo, but sphalerites had invariant δ"6"6Zn. • Variations of 2.2‰ in δ"9"8Mo and 0.7‰ in δ"6"6Zn were measured in mine drainage. • Attenuation processes drive changes in δ"6"6Zn and δ"9"8Mo in solution.

Microbial communities associated with uranium in-situ recovery mining process are related to acid mine drainage assemblages.

Science.gov (United States)

Coral, Thomas; Descostes, Michaël; De Boissezon, Hélène; Bernier-Latmani, Rizlan; de Alencastro, Luiz Felippe; Rossi, Pierre

2018-07-01

A large fraction (47%) of the world's uranium is mined by a technique called "In Situ Recovery" (ISR). This mining technique involves the injection of a leaching fluid (acidic or alkaline) into a uranium-bearing aquifer and the pumping of the resulting solution through cation exchange columns for the recovery of dissolved uranium. The present study reports the in-depth alterations brought to autochthonous microbial communities during acidic ISR activities. Water samples were collected from a uranium roll-front deposit that is part of an ISR mine in operation (Tortkuduk, Kazakhstan). Water samples were obtained at a depth of ca 500 m below ground level from several zones of the Uyuk aquifer following the natural redox zonation inherited from the roll front deposit, including the native mineralized orebody and both upstream and downstream adjacent locations. Samples were collected equally from both the entrance and the exit of the uranium concentration plant. Next-generation sequencing data showed that the redox gradient shaped the community structures, within the anaerobic, reduced, and oligotrophic habitats of the native aquifer zones. Acid injection induced drastic changes in the structures of these communities, with a large decrease in both cell numbers and diversity. Communities present in the acidified (pH values acid mine drainage, with the dominance of Sulfobacillus sp., Leptospirillum sp. and Acidithiobacillus sp., as well as the archaean Ferroplasma sp. Communities located up- and downstream of the mineralized zone under ISR and affected by acidic fluids were blended with additional facultative anaerobic and acidophilic microorganisms. These mixed biomes may be suitable communities for the natural attenuation of ISR mining-affected subsurface through the reduction of metals and sulfate. Assessing the effect of acidification on the microbial community is critical to evaluating the potential for natural attenuation or active bioremediation strategies

Laboratory studies on natural restoration of ground water after in-situ leach uranium mining

International Nuclear Information System (INIS)

Bell, N.E.; Deutsch, W.J.; Serne, R.J.

1983-05-01

When uranium is mined using in-situ leach techniques, the chemical quality of the ground water in the ore-zone aquifer is affected. This could lead to long-term degradation of the ground water if restoration techniques are not applied after the leaching is completed. Pacific Northwest Laboratory (PNL), is conducting an NRC-sponsored research project on natural restoration and induced-restoration techniques. Laboratory studies were designed to evaluate the ability of the natural system (ore-zone sediments and groundwater) to mitigate the effects of mining on aquifer chemistry. Using batch and flow-through column experiments [performed with lixiviant (leaching solution) and sediments from the reduced zone of an ore-zone aquifer], we found that the natural system can lower uranium and bicarbonate concentrations in solutions and reduce the lixiviant redox potential (Eh). The change in redox potential could cause some of the contaminants that were dissolved during the uranium leaching operation to precipitate, thereby lowering their solution concentration. The concentrations of other species such as calcium, potassium, and sulfate increased, possibly as a result of mineral dissolution and ion exchange. In this paper, we describe the experimentally determined mobility of contaminants after in-situ leach mining, and discuss the possible chemical process affecting mobility

Laboratory studies on natural restoration of ground water after in-situ leach uranium mining

Energy Technology Data Exchange (ETDEWEB)

Bell, N.E.; Deutsch, W.J.; Serne, R.J.

1983-05-01

When uranium is mined using in-situ leach techniques, the chemical quality of the ground water in the ore-zone aquifer is affected. This could lead to long-term degradation of the ground water if restoration techniques are not applied after the leaching is completed. Pacific Northwest Laboratory (PNL), is conducting an NRC-sponsored research project on natural restoration and induced-restoration techniques. Laboratory studies were designed to evaluate the ability of the natural system (ore-zone sediments and groundwater) to mitigate the effects of mining on aquifer chemistry. Using batch and flow-through column experiments (performed with lixiviant (leaching solution) and sediments from the reduced zone of an ore-zone aquifer), we found that the natural system can lower uranium and bicarbonate concentrations in solutions and reduce the lixiviant redox potential (Eh). The change in redox potential could cause some of the contaminants that were dissolved during the uranium leaching operation to precipitate, thereby lowering their solution concentration. The concentrations of other species such as calcium, potassium, and sulfate increased, possibly as a result of mineral dissolution and ion exchange. In this paper, we describe the experimentally determined mobility of contaminants after in-situ leach mining, and discuss the possible chemical process affecting mobility.

Theoretical approaches to creation of robotic coal mines based on the synthesis of simulation technologies

Science.gov (United States)

Fryanov, V. N.; Pavlova, L. D.; Temlyantsev, M. V.

2017-09-01

Methodological approaches to theoretical substantiation of the structure and parameters of robotic coal mines are outlined. The results of mathematical and numerical modeling revealed the features of manifestation of geomechanical and gas dynamic processes in the conditions of robotic mines. Technological solutions for the design and manufacture of technical means for robotic mine are adopted using the method of economic and mathematical modeling and in accordance with the current regulatory documents. For a comparative performance evaluation of technological schemes of traditional and robotic mines, methods of cognitive modeling and matrix search for subsystem elements in the synthesis of a complex geotechnological system are applied. It is substantiated that the process of technical re-equipment of a traditional mine with a phased transition to a robotic mine will reduce unit costs by almost 1.5 times with a significant social effect due to a reduction in the number of personnel engaged in hazardous work.

Air Pollution Monitoring and Mining Based on Sensor Grid in London.

Science.gov (United States)

Ma, Yajie; Richards, Mark; Ghanem, Moustafa; Guo, Yike; Hassard, John

2008-06-01

In this paper, we present a distributed infrastructure based on wireless sensors network and Grid computing technology for air pollution monitoring and mining, which aims to develop low-cost and ubiquitous sensor networks to collect real-time, large scale and comprehensive environmental data from road traffic emissions for air pollution monitoring in urban environment. The main informatics challenges in respect to constructing the high-throughput sensor Grid are discussed in this paper. We present a twolayer network framework, a P2P e-Science Grid architecture, and the distributed data mining algorithm as the solutions to address the challenges. We simulated the system in TinyOS to examine the operation of each sensor as well as the networking performance. We also present the distributed data mining result to examine the effectiveness of the algorithm.

Surface mining machines problems of maintenance and modernization

CERN Document Server

Rusiński, Eugeniusz; Moczko, Przemysław; Pietrusiak, Damian

2017-01-01

This unique volume imparts practical information on the operation, maintenance, and modernization of heavy performance machines such as lignite mine machines, bucket wheel excavators, and spreaders. Problems of large scale machines (mega machines) are highly specific and not well recognized in the common mechanical engineering environment. Prof. Rusiński and his co-authors identify solutions that increase the durability of these machines as well as discuss methods of failure analysis and technical condition assessment procedures. "Surface Mining Machines: Problems in Maintenance and Modernization" stands as a much-needed guidebook for engineers facing the particular challenges of heavy performance machines and offers a distinct and interesting demonstration of scale-up issues for researchers and scientists from across the fields of machine design and mechanical engineering.

Exploitation of multi-temporal Earth Observation imagery for monitoring land cover change in mining sites

Science.gov (United States)

Petropoulos, G.; Partsinevelos, P.; Mitraka, Z.

2012-04-01

Surface mining has been shown to cause intensive environmental degradation in terms of landscape, vegetation and biological communities. Nowadays, the commercial availability of remote sensing imagery at high spatiotemporal scales, has improved dramatically our ability to monitor surface mining activity and evaluate its impact on the environment and society. In this study we investigate the potential use of Landsat TM imagery combined with diverse classification techniques, namely artificial neural networks and support vector machines for delineating mining exploration and assessing its effect on vegetation in various surface mining sites in the Greek island of Milos. Assessment of the mining impact in the study area is validated through the analysis of available QuickBird imagery acquired nearly concurrently to the TM overpasses. Results indicate the capability of the TM sensor combined with the image analysis applied herein as a potential economically viable solution to provide rapidly and at regular time intervals information on mining activity and its impact to the local environment. KEYWORDS: mining environmental impact, remote sensing, image classification, change detection, land reclamation, support vector machines, neural networks

Requirements and opportunities for mining engineers in the mining industry abroad

Energy Technology Data Exchange (ETDEWEB)

Albrecht, E

1987-04-09

The decline of the German mining industry and the increasing industrialization of mining is forcing ever greater numbers of young German mining graduates to build their careers abroad. The requirements for this - apart from the technical qualifications are a good knowledge of foreign languages and a readiness to leave Germany for a long time, even for ever. If the young mining graduate accepts these conditions, numerous professional opportunities will open up for him, both with German mining companies with interests abroad, in mining supply companies and consultancy firms and with foreign companies. 6 references.

Metal adsorption capabilities of clinoptilolite and selected strains of bacteria from mine water

Science.gov (United States)

Mamba, B. B.; Dlamini, N. P.; Nyembe, D. W.; Mulaba-Bafubiandi, A. F.

Small-scale mining has socio-economic advantages such as the reduction of unemployment and the general improvement of the economy. However, these operations if not properly managed or controlled have a potential to cause environmental damage, particularly with respect to the contamination of groundwater and water supplies that are not distant from where these mining activities take place. This paper focuses on metal removal from water contaminated by heavy metals emanating from small-scale mining operations using clinoptilolite and bacteria. Removal of As, Ni, Mn, Au, Co, Cu and Fe was carried out on mine water samples using original and HCl-activated (in 0.02 M and 0.04 M) natural clinoptilolite and bacterial strains (a mixed consortia of Bacillus strains ( Bacillus subtilis, Bacillus cereus, Bacillus firmus, Bacillus fusiformis, Bacillus macroides and Bacillus licheniformis), Pseudomonas spp., Shewanella spp. and a mixed consortia of Acidithiobcillus caldus, Leptospirillum spp., Ferroplasma spp. and Sulphobacillus spp.). The purpose of the study was to compare the removal efficiencies of the bacterial strains versus natural clinoptilolite adsorbents for metal cations. The Bacillus consortia removed most of the metals up to 98% metal removal efficiency with the exception of nickel where clinoptilolite showed good removal efficiency. The 0.02 M HCl-activated clinoptilolite also demonstrated excellent removal capabilities with Cu, Co and Fe removal efficiency of up to 98%. Both clinoptilolite and bacteria demonstrated capabilities of removing Cu 2+, Co 2+, Fe 2+, Mn 2+, As 3+ and Au from solution which augurs well for metal recovery from mining and mineral processing solutions, as well as in water decontamination.

Mining

Directory of Open Access Journals (Sweden)

Khairullah Khan

2014-09-01

Full Text Available Opinion mining is an interesting area of research because of its applications in various fields. Collecting opinions of people about products and about social and political events and problems through the Web is becoming increasingly popular every day. The opinions of users are helpful for the public and for stakeholders when making certain decisions. Opinion mining is a way to retrieve information through search engines, Web blogs and social networks. Because of the huge number of reviews in the form of unstructured text, it is impossible to summarize the information manually. Accordingly, efficient computational methods are needed for mining and summarizing the reviews from corpuses and Web documents. This study presents a systematic literature survey regarding the computational techniques, models and algorithms for mining opinion components from unstructured reviews.

PREVENTION OF ACID MINE DRAINAGE GENERATION FROM OPEN-PIT MINE HIGHWALLS

Science.gov (United States)

Exposed, open pit mine highwalls contribute significantly to the production of acid mine drainage (AMD) thus causing environmental concerns upon closure of an operating mine. Available information on the generation of AMD from open-pit mine highwalls is very limit...

A direction of developing a mining method and mining complexes

Energy Technology Data Exchange (ETDEWEB)

Gabov, V.V.; Efimov, I.A. [St. Petersburg State Mining Institute, St. Petersburg (Russian Federation). Vorkuta Branch

1996-12-31

The analyses of a mining method as a main factor determining the development stages of mining units is presented. The paper suggests a perspective mining method which differs from the known ones by following peculiarities: the direction selectivity of cuts with regard to coal seams structure; the cutting speed, thickness and succession of dusts. This method may be done by modulate complexes (a shield carrying a cutting head for coal mining), their mining devices being supplied with hydraulic drive. An experimental model of the module complex has been developed. 2 refs.

Charting the Improvement of Artisanal and Small-Scale Gold Mining ...

International Development Research Centre (IDRC) Digital Library (Canada)

AGC

2014-02-28

Feb 28, 2014 ... the problems and solutions surrounding the ASGM sector, improve the ... Keywords: mercury, gold, artisanal mining, mercury watch, Minimata Convention .... each were assigned a minimal value of 0.3 tonnes/year. .... for ASGM, including the creation of a National Action Plan on ASGM, under the Minamata.

Microearthquake studies in the vicinity of the Cane Creek Potash Mine, Paradox Basin, Utah

International Nuclear Information System (INIS)

Wong, I.G.; Humphrey, J.R.; Silva, W.J.

1987-08-01

For a 12-week period in 1984, a 5- to 9-station high-resolution network of analog and digital microearthquake recorders operated monitoring seismicity. The solution mine, previously a room-and-pillar mine located at an average depth of 1 km in the late-Paleozoic Paradox Formation, was undergoing a major brine extraction and refilling. The objective was to determine whether the seismicity previously observed in the vicinity of the mine by the Paradox Basin microearthquake network was associated with the mining activities. Several thousand events of two types were recorded: (1) events identical in appearance to tectonic microearthquakes that occurred throughout the region, and (2) unusual harmonic surface-wave-like events thought to be caused by the collapsing of a column of salt in the main shaft. 31 refs., 36 figs., 3 tabs

Mining multi-dimensional data for decision support

Energy Technology Data Exchange (ETDEWEB)

Donato, J.M.; Schryver, J.C.; Hinkel, G.C.; Schmoyer, R.L. Jr. [Oak Ridge National Lab., TN (United States); Grady, N.W.; Leuze, M.R. [Oak Ridge National Lab., TN (United States)]|[Joint Inst. for Computational Science, Knoxville, TN (United States)

1998-06-01

While it is widely recognized that data can be a valuable resource for any organization, extracting information contained within the data is often a difficult problem. Attempts to obtain information from data may be limited by legacy data storage formats, lack of expert knowledge about the data, difficulty in viewing the data, or the volume of data needing to be processed. The rapidly developing field of Data Mining or Knowledge Data Discovery is a blending of Artificial Intelligence, Statistics, and Human-Computer Interaction. Sophisticated data navigation tools to obtain the information needed for decision support do not yet exist. Each data mining task requires a custom solution that depends upon the character and quantity of the data. This paper presents a two-stage approach for handling the prediction of personal bankruptcy using credit card account data, combining decision tree and artificial neural network technologies. Topics to be discussed include the pre-processing of data, including data cleansing, the filtering of data for pertinent records, and the reduction of data for attributes contributing to the prediction of bankruptcy, and the two steps in the mining process itself.

What's weathering? Mineralogy and field leach studies in mine waste, Leadville and Montezuma mining districts, Colorado

Science.gov (United States)

Diehl, S.F.; Hageman, Phil L.; Smith, Kathleen S.

2006-01-01

Weathering is important in the development of rock fabrics that control porosity in mine-waste materials, and in turn, porosity affects metal transport through and from mine-waste piles into watersheds. Mine-waste piles are dynamic physical and chemical systems as evidenced by remnant Fe-oxide boxwork structures after sulfide minerals, development of alteration rinds and etch pits on grains, and precipitation of secondary minerals under low temperature conditions. These microscale changes in the mine-waste materials are the result of partial to total dissolution of sulfide and other minerals. Mine-waste materials from the Dinero, Lower Chatauqua, and Saints John sites, Leadville and Montezuma mining districts, Colorado, exhibit rock fabrics that indicate that weathering products, e.g., Fe oxyhydroxides, jarosite, and clays, have been transported in suspension through the waste piles and deposited in voids and as coatings on rock fragments. Microscale characterization of weathered, partially dissolved minerals lends insight into the source of leachable metals in these mine-waste sites. Mineralogic studies show that galena in the Lower Chatauqua waste is enriched in Ag. Qualitative and semiquantitative microanalysis of weathered, altered galena grains from all three sites show that the Ag-bearing galena is more susceptible to dissolution. It is not surprising, then, that solutions experimentally leached from Lower Chatauqua waste are higher in Pb (2310 ppb) compared to leachates from the Dinero (31 ppb) and Saints John (1360 ppb) wastes. The mobility of metals is increased at acidic pH. Using the USGS Field Leach Test protocol, leachate derived from the Dinero waste has a pH of 3 and high concentrations of Al (443 ppb), Fe (441 ppb), and Zn (7970 ppb). Leachate from Sts. John tailings has a pH about 4 and high concentrations of Mn (1520 ppb), Zn (2240 ppb), and Pb (1360 ppb). Leachate from the Lower Chatauqua waste has an intermediate pH of 5, but in addition to the

Booster fans : some considerations for their usage in underground coal mines

Energy Technology Data Exchange (ETDEWEB)

Gillies, S.; Slaughter, C. [Missouri Univ. of Science and Technology, Rolla, MO (United States); Calizaya, F. [Utah Univ., Salt Lake City, UT (United States); Wu, H.W. [Gillies Wu Mining Technology Pty Ltd., Brisbane, QLD (Australia)

2010-07-01

This paper reported on a study that investigated the conditions under which booster fans can be used safely and efficiently in underground coal mines. Booster fans are installed in series with a main surface fan and are used to boost the air pressure of the ventilation air passing through it. Several coal mining countries use booster fans, but in the United States, they are only used in metal/non-metal mines due to concerns of uncontrolled recirculation. This study investigated installations of booster fans in non-US underground coal mines where safe and efficient atmospheric conditions are achieved. The purpose was to collect reliable information on airway resistances and flow requirements typical in large US coal mines. The study showed that safe booster fan installations are found in both high and low gas conditions, and sometimes where workings are located at great depths. The interlocking systems within the booster fan can control the underground fans and avoid recirculation when surface fans are unexpectedly turned off. Another purpose of the study was to determine when booster fans become a more viable solution in coal mines due to increases in air requirements at higher production rates. It was concluded that a new fan selection algorithm to produce recirculation-free ventilation designs will be developed to enable US coal mine operators to develop ventilation designs to extract coal seams from depths greater than 1000 m. 17 refs., 1 fig.

30 CFR 780.27 - Reclamation plan: Surface mining near underground mining.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Reclamation plan: Surface mining near underground mining. 780.27 Section 780.27 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL...

Minimizing the Impact of Mining Activities for Sustainable Mined-Out ...

African Journals Online (AJOL)

Minimizing the Impact of Mining Activities for Sustainable Mined-Out Area ... sensing and Geographical Information System (GIS) in assessing environmental impact of ... Keywords: Solid mineral, Impact assessment, Mined-out area utilization, ...

Archveyor{trademark} automated mining system - implementation at the Conant mine

Energy Technology Data Exchange (ETDEWEB)

Hofmann, W.J. [Arch of Illinois, Percy, IL (United States)

1997-12-01

Arch Mineral Corporation, through the Arch Technology Department, has developed an automated continuous haulage mining system called the `Archveyor{trademark}`. The original technology came from a Russian patent. Kloeckner-Becorit (K-B) further developed the system and called it the `Mobile Conveyor`. This system was utilized in both coal and trona mines in the United States and Canada. Consolidation Coal designed their version of this continuous haulage system, called the `Tramveyor`. The Tramveyor is presently operating in their Dilworth Mine, in Pennsylvania. This system has no computer guidance system related to the continuous miner or the Tramveyor. Arch Mineral Corporation has further developed this continuous haulage mining system. Their system is a programmable, logic-controlled (PLC) automated mining system. A highwall version of the Archveyor{trademark} is being operated at Arch of Wyoming near Hanna, Wyoming. This paper introduces the first underground version of Archveyor{trademark} to be implemented at Conant Mine in southern Illinois. During the development process, the Archveyor{trademark} mining system consists of a continuous miner, a bolter car, the Archveyor{trademark} (itself), a stageloader, and an operator`s cab. During the secondary mining process the bolter car is taken out of the system.

Mercury volatilisation and phytoextraction from base-metal mine tailings.

Science.gov (United States)

Moreno, Fabio N; Anderson, Chris W N; Stewart, Robert B; Robinson, Brett H

2005-07-01

Experiments were carried out in plant growth chambers and in the field to investigate plant-mercury accumulation and volatilisation in the presence of thiosulphate (S2O3)-containing solutions. Brassica juncea (Indian mustard) plants grown in Hg-contaminated Tui mine tailings (New Zealand) were enclosed in gastight volatilisation chambers to investigate the effect of ammonium thiosulphate ([NH4]2 S2O3) on the plant-Hg volatilisation process. Application of (NH4)2 S2O3 to substrates increased up to 6 times the Hg concentration in shoots and roots of B. juncea relative to controls. Volatilisation rates were significantly higher in plants irrigated only with water (control) when compared to plants treated with (NH4)2 S2O3. Volatilisation from barren pots (without plants) indicated that Hg in tailings is subject to biological and photochemical reactions. Addition of sodium thiosulphate (Na2S2O3) at 5 g/kg of substrate to B. juncea plants grown at the Tui mine site confirmed the plant growth chambers studies showing the effectiveness of thio-solutions at enhancing shoot Hg concentrations. Mercury extraction from the field plots yielded a maximum value of 25 g/ha. Mass balance studies revealed that volatilisation is a dominant pathway for Hg removal from the Tui mine site. A preliminary assessment of the risks of volatilisation indicated that enhanced Hg emissions by plants would not harm the local population and the regional environment.

Management of mining-related damages in abandoned underground coal mine areas using GIS

International Nuclear Information System (INIS)

Lee, U.J.; Kim, J.A.; Kim, S.S.; Kim, W.K.; Yoon, S.H.; Choi, J.K.

2005-01-01

The mining-related damages such as ground subsidence, acid mine drainage (AMD), and deforestation in the abandoned underground coal mine areas become an object of public concern. Therefore, the system to manage the mining-related damages is needed for the effective drive of rehabilitation activities. The management system for Abandoned Underground Coal Mine using GIS includes the database about mining record and information associated with the mining-related damages and application programs to support mine damage prevention business. Also, this system would support decision-making policy for rehabilitation and provide basic geological data for regional construction works in abandoned underground coal mine areas. (authors)

Text Mining.

Science.gov (United States)

Trybula, Walter J.

1999-01-01

Reviews the state of research in text mining, focusing on newer developments. The intent is to describe the disparate investigations currently included under the term text mining and provide a cohesive structure for these efforts. A summary of research identifies key organizations responsible for pushing the development of text mining. A section…

Surface mining

Science.gov (United States)

Robert Leopold; Bruce Rowland; Reed Stalder

1979-01-01

The surface mining process consists of four phases: (1) exploration; (2) development; (3) production; and (4) reclamation. A variety of surface mining methods has been developed, including strip mining, auger, area strip, open pit, dredging, and hydraulic. Sound planning and design techniques are essential to implement alternatives to meet the myriad of laws,...

Uranium mining

International Nuclear Information System (INIS)

Lange, G.

1975-01-01

The winning of uranium ore is the first stage of the fuel cycle. The whole complex of questions to be considered when evaluating the profitability of an ore mine is shortly outlined, and the possible mining techniques are described. Some data on uranium mining in the western world are also given. (RB) [de

Preference Mining Using Neighborhood Rough Set Model on Two Universes.

Science.gov (United States)

Zeng, Kai

2016-01-01

Preference mining plays an important role in e-commerce and video websites for enhancing user satisfaction and loyalty. Some classical methods are not available for the cold-start problem when the user or the item is new. In this paper, we propose a new model, called parametric neighborhood rough set on two universes (NRSTU), to describe the user and item data structures. Furthermore, the neighborhood lower approximation operator is used for defining the preference rules. Then, we provide the means for recommending items to users by using these rules. Finally, we give an experimental example to show the details of NRSTU-based preference mining for cold-start problem. The parameters of the model are also discussed. The experimental results show that the proposed method presents an effective solution for preference mining. In particular, NRSTU improves the recommendation accuracy by about 19% compared to the traditional method.

Analysis of conflicts in the use of space in mining basin “Kolubara”

Directory of Open Access Journals (Sweden)

Živković Marija

2012-01-01

Full Text Available Consequence of impact of the surface exploitation on the environment is manifested in the form of physical, social, and environmental conflicts. The dominant conflicts of the Kolubara lignite basin space occurs between mining and agriculture, which indicates the importance of the process of rehabilitation and revitalization of contaminated land and its effective bringing to the original purpose. Another significant conflict appears between the existing settlements and mining, infrastructural, water management and other facilities, which are located in areas of mining works, so the solution is in their displacement. As consequence of development of the mining-energy industrial system there is an adverse impact on the environment, which is reflected in the pollution of air, land, groundwater and surface water. Ecological dimension of this conflict presents clear and limiting factor for the mine development, which directly points that the economic development of mining basin “Kolubara” is directed toward the rational exploitation of natural resources (coal, water, land, ect.. In the process of harmonization of these conflicts, it is necessary to take into account that the energy policy acts at the national level, as the public interest, and therefore has priority over all other interests.

New Technical Solution for Vertical Shaft Equipping Using Steel Headframe of Multifunction Purpose

Science.gov (United States)

Kassikhina, Elena; Pershin, Vladimir; Glazkov, Yurij

2017-11-01

The article reviews a novel approach to the design of steel angle headframe for vertical shafts of coal and ore mines on the basis of rational design solutions. Practice of construction of coal and ore mines provides application of various designs for steel angle headframes which are divided into separate large assembly blocks and constructive elements during assembling operations. Design of these blocks and elements, their weight and dimensions effect the chose of the method of assembling on which economic and technological indicators, as well as duration of down-time, depend on during performance of construction operations in shaft. The technical solution on equipment provision for mine vertical shaft using headframe of multifunctional purpose will allow changing the management construction of vertical shaft. The constructive design of the headgear allows application of the effective method of assembly and thus to provide improvement of the technical and economic indexes, and high calendar time rate of the shaft construction due to reduction of duration of works on equipment provision for the shaft and to refurbishment of the shaft in order to carry out horizontal mining.

Realizatinon of “zero emission” of mining water effluents from Sasa mine

OpenAIRE

Mirakovski, Dejan; Doneva, Nikolinka; Hadzi-Nikolova, Marija; Gocevski, Borce

2015-01-01

Sasa mine continuously takes actions to minimize the environmental impact of mining activities, in order to fulfill the national legislation in the field of environmental protection which comply with European legislation. This paper shows the drainage system of the horizon 830, which is performed in order to prevent free leakage of mining groundwater, as a part of these actions. This system provides a zero emission of mining water in the environment from Sasa mine. Key words: mining water...

Sustainable rehabilitation of mining waste and acid mine drainage using geochemistry, mine type, mineralogy, texture, ore extraction and climate knowledge.

Science.gov (United States)

Anawar, Hossain Md

2015-08-01

The oxidative dissolution of sulfidic minerals releases the extremely acidic leachate, sulfate and potentially toxic elements e.g., As, Ag, Cd, Cr, Cu, Hg, Ni, Pb, Sb, Th, U, Zn, etc. from different mine tailings and waste dumps. For the sustainable rehabilitation and disposal of mining waste, the sources and mechanisms of contaminant generation, fate and transport of contaminants should be clearly understood. Therefore, this study has provided a critical review on (1) recent insights in mechanisms of oxidation of sulfidic minerals, (2) environmental contamination by mining waste, and (3) remediation and rehabilitation techniques, and (4) then developed the GEMTEC conceptual model/guide [(bio)-geochemistry-mine type-mineralogy- geological texture-ore extraction process-climatic knowledge)] to provide the new scientific approach and knowledge for remediation of mining wastes and acid mine drainage. This study has suggested the pre-mining geological, geochemical, mineralogical and microtextural characterization of different mineral deposits, and post-mining studies of ore extraction processes, physical, geochemical, mineralogical and microbial reactions, natural attenuation and effect of climate change for sustainable rehabilitation of mining waste. All components of this model should be considered for effective and integrated management of mining waste and acid mine drainage. Copyright © 2015 Elsevier Ltd. All rights reserved.

A study into the treatability of ochreous mine water discharges

Energy Technology Data Exchange (ETDEWEB)

Clark, C J; Crawshaw, D H

1979-01-01

The oxidation of ferrous salts in solution from waste-water discharges from 3 abandoned and flooded mines near Bromley, Lancs, (UK) has since 1968 caused discoloration in the Calder River. Deposition and dilution decreases the ochreous effect, but the iron oxide is harmful to the benthos by producing a low dissolved-oxygen environment. The Calder River is only a Class 4 river below the confluence with the stream which carried the mine waters, and pilot-plant studies and field trials are described to determine the feasibility of full- scale treatment of the stream waters, resulting in the recommendation of lagoon treatment followed by neutralization.

Philippine Mining Capitalism: The Changing Terrains of Struggle in the Neoliberal Mining Regime

Directory of Open Access Journals (Sweden)

Alvin A. Camba

2016-06-01

Full Text Available This article analyzes how the mining sector and anti-mining groups compete for mining outcomes in the Philippines. I argue that the transition to a neoliberal mineral regime has empowered the mining sector and weakened the mining groups by shifting the terrains of struggle onto the domains of state agencies and scientific networks. Since the neoliberal era, the mining sector has come up with two strategies. First, technologies of subjection elevate various public institutions to elect and select the processes aimed at making mining accountable and sensitive to the demands of local communities. However, they often refuse or lack the capacity to intervene effectively. Second, technologies of subjectivities allow a selective group of industry experts to single-handedly determine the environmental viability of mining projects. Mining consultants, specialists, and scientists chosen by mining companies determine the potential environmental damage on water bodies, air pollution, and soil erosion. Because of the mining capital’s access to economic and legal resources, anti-mining communities across the Philippines have been forced to compete on an unequal terrain for a meaningful social dialogue and mining outcomes.

Discussion on resin conversion related problems in the process of using ion exchange method to recover uranium from carbonate lixivium in a uranium mine

International Nuclear Information System (INIS)

Yu Suqin; Du Yuhai; Long Qing; Han Wei; Que Weimin

2012-01-01

Ion exchange method was used to recover uranium from carbonate lixivium in a uranium mine, lean resin was converted by sodium bicarbonate solution. Because of high sodium bicarbonate, chlorine and uranium concentration in the converted solution, it is difficult to effectively use. Combined with the production practices of the mine, the resin conversion related problems were analyzed. Some measures were taken for improving utilization rate of the converted solution, and good results were obtained. The utilization rate of the converted solution increased to about 20% from less than lO%, and the consumption of sodium bicarbonate reduced by about 30%. (authors)

Hygienic evaluation of new technology for control of methane and dust in coal mines

Energy Technology Data Exchange (ETDEWEB)

Gadzhiev, G P; Deynega, V G; Sukhanov, V V; Levshina, I M; Yarym, N T; Petrenko, G A

1977-07-01

Exploitation of available new technology for mining is hindered by the dangers of gas evolution, and the need for maintenance of hygienic standards. The Moscow Mining Institute has developed, and proposed for industrial introduction, a new process for control of methane and dust in mine shafts; the method will help to raise significantly the productivity of excavating machines in high gas factor shafts. The process to combat methane and dust consists essentially in drilling boreholes from the side of the gallery, or from the outer surface, into the coal-bearing stratum. These boreholes are injected with a 24% solution of urea-formaldehyde resin (binder M/sub 2/), with 1% solution of ammonium chloride hardener. After several months this plastic is removed. The new technology involves the escape of toxic substances into the air, hence the need for hygienic testing. Additional study must estimate the danger of accidents, e.g., shaft fires, toxicity of combustion products of coal or binder. Study is also needed on pathologies which might occur to miners engaged in removal of the plastic with the new technology.

Technological highwall mining

Energy Technology Data Exchange (ETDEWEB)

Davison, I. [Highwall Systems (United States)

2006-09-15

The paper explores the issues facing highwall mining. Based in Chilhowie, Virginia, American Highwall Systems has developed a highwall mining system that will allow the mining of coal seams from 26 in to 10 ft in thickness. The first production model, AH51, began mining in August 2006. Technologies incorporated into the company's mining machines to improve the performance, enhance the efficiency, and improve the reliability of the highwall mining equipment incorporate technologies from many disciplines. Technology as applied to design engineering, manufacturing and fabrication engineering, control and monitoring computer hardware and software has played an important role in the evolution of the American Highwall Systems design concept. 5 photos.

Key Lake Mining Corporation metallurgical complex

International Nuclear Information System (INIS)

Lendrum, F.C.

1984-02-01

The Key Lake uranium mine is located in Saskatchewan, 550 km northeast of Saskatoon. It began operations in 1983, and is licensed and regulated by both Saskatchewan government agencies and the Canadian Atomic Energy Control Board. This report examines the metallurgical processes used at the mill and discusses the spills that occurred in the first four months the mine was in operation. It finds that all spills of an acidic nature in the mill were small amounts in the CCD or solution pretreatment sections. Contingency procedures are in place and sumps are capable of handling spills. The only major change in design contemplated will be converting the secondary crushing from the use of an impact crusher to the use of a semi-autogeneous grinding mill. The monitoring program set out by the AECB and Saskatchewan Environment is thorough. It monitors effluents and water pathways, and includes aquatic biota and sediments. Air monitoring is also required by Saskatchewan Environment

Recent developments in uranium resources and production with emphasis on in situ leach mining. Proceedings of a technical meeting

International Nuclear Information System (INIS)

2004-06-01

An important role of the International Atomic Energy Agency is establishing contacts between Member States in order to foster the exchange of scientific and technical information on uranium production technologies. In situ leach (ISL) mining is defined as, the extraction of uranium from the host sandstone by chemical solutions and the recovery of uranium at the surface. ISL extraction is conducted by injecting a suitable leach solution into the ore zone below the water table; oxidizing, complexing, and mobilizing the uranium; recovering the pregnant solutions through production wells; and, finally, pumping the uranium bearing solution to the surface for further processing. As compared with conventional mining, in situ leach is recognized as having economic and environmental advantages when properly employed by knowledgeable specialists to extract uranium from suitable sandstone type deposits. Despite its limited applicability to specific types of uranium deposits, in recent years ISL uranium mining has been producing 15 to 21 per cent of world output. In 2002, ISL production was achieved in Australia, China, Kazakhstan, the United States of America and Uzbekistan. Its importance is expected to increase with new projects in Australia, China, Kazakhstan and the Russian Federation. The Technical Meeting on Recent Development in Uranium Resources and Production with Special Emphasis on In Situ Leach Mining, was held in Beijing from 18 to 20 September 2002, followed by the visit of the Yili ISL mine, Xinjiang Autonomous Region, China, from 21 to 23 September 2002. The meeting, held in cooperation with the Bureau of Geology, China National Nuclear Cooperation, was successful in bringing together 59 specialists representing 18 member states and one international organization (OECD/Nuclear Energy Agency). The papers describe a wide variety of activities related to the theme of the meeting. Subjects such as geology, resources evaluation, licensing, and mine restoration were

Spectrophotometric determination of zinc in impure solutions

International Nuclear Information System (INIS)

Rodriguez Hernandez, B.; Reyes Tamaral, A.

1972-01-01

A dithizone colorimetric method is described for determining zinc concentrations of 0.001 to 5 g/l in aqueous solutions from Rio Tinto Mines, containing copper, iron and other impurities. Citrate, cyanide and bis-2hydroxyethyl)-dithiocarbamate are added to the aqueous sample of masking several metals, and zinc is extracted at pH 5 with a solution of dithizone in carbon tetrachloride. Excess of dithizone is removed with sodium sulphide, and optical density of zinc dithionate in organic solution is measured at 5.35 nm. Calibration curves obey Beer's law up to 0.5 micro Zn/ml. (Author) 5 refs

Kiruna research mine

Energy Technology Data Exchange (ETDEWEB)

Oestensen, A

1983-12-01

The research mine at Kiruna is the first large-scale mining research project sponsored by the Swedish government. Under the leadership of the Swedish Mining Research Foundation, a five-year project involving development of new mining systems and machinery will be carried out in cooperation with the Lulea Institute of Technology and a number of Swedish industrial companies.

Air Pollution Monitoring and Mining Based on Sensor Grid in London

Science.gov (United States)

Ma, Yajie; Richards, Mark; Ghanem, Moustafa; Guo, Yike; Hassard, John

2008-01-01

In this paper, we present a distributed infrastructure based on wireless sensors network and Grid computing technology for air pollution monitoring and mining, which aims to develop low-cost and ubiquitous sensor networks to collect real-time, large scale and comprehensive environmental data from road traffic emissions for air pollution monitoring in urban environment. The main informatics challenges in respect to constructing the high-throughput sensor Grid are discussed in this paper. We present a two-layer network framework, a P2P e-Science Grid architecture, and the distributed data mining algorithm as the solutions to address the challenges. We simulated the system in TinyOS to examine the operation of each sensor as well as the networking performance. We also present the distributed data mining result to examine the effectiveness of the algorithm. PMID:27879895

Air Pollution Monitoring and Mining Based on Sensor Grid in London

Directory of Open Access Journals (Sweden)

John Hassard

2008-06-01

Full Text Available In this paper, we present a distributed infrastructure based on wireless sensors network and Grid computing technology for air pollution monitoring and mining, which aims to develop low-cost and ubiquitous sensor networks to collect real-time, large scale and comprehensive environmental data from road traffic emissions for air pollution monitoring in urban environment. The main informatics challenges in respect to constructing the high-throughput sensor Grid are discussed in this paper. We present a twolayer network framework, a P2P e-Science Grid architecture, and the distributed data mining algorithm as the solutions to address the challenges. We simulated the system in TinyOS to examine the operation of each sensor as well as the networking performance. We also present the distributed data mining result to examine the effectiveness of the algorithm.

Value of spatial planning for large mining and energy complexes. [Yugoslavia

Energy Technology Data Exchange (ETDEWEB)

Matko, Z; Spasic, N

1982-01-01

In the example of the Kosovo complex (Socialist Federated Republic of Yugoslovia) an examination is made of the value of developing a spatial plan for the territory of large mining-energy complexes. The goals and expected results of spatial planning are discussed. The open method of working lignite, fuel shale and other fossil energy raw material fields at the modern level of development of technology, in addition to large-volume physical interferences in space, causes considerable structural changes of functional-economic, socioeconomic and psychological-sociological nature in the direct zone of influence of the mining-energy complex. Improvement in technology of working a lignite field does not guarantee in the near future any solutions in developing the mining-energy complexes, and therefore it is necessary to count on considerable volume of degradation of space which is governed by the existing technology. Under these conditions detailed planning and regulation of space is especially important, if one views them as a component part of long term policy for development of the mining energy complex and the zones of its influence.

A concept for the modernization of underground mining master maps based on the enrichment of data definitions and spatial database technology

Science.gov (United States)

Krawczyk, Artur

2018-01-01

In this article, topics regarding the technical and legal aspects of creating digital underground mining maps are described. Currently used technologies and solutions for creating, storing and making digital maps accessible are described in the context of the Polish mining industry. Also, some problems with the use of these technologies are identified and described. One of the identified problems is the need to expand the range of mining map data provided by survey departments to other mining departments, such as ventilation maintenance or geological maintenance. Three solutions are proposed and analyzed, and one is chosen for further analysis. The analysis concerns data storage and making survey data accessible not only from paper documentation, but also directly from computer systems. Based on enrichment data, new processing procedures are proposed for a new way of presenting information that allows the preparation of new cartographic representations (symbols) of data with regard to users' needs.

Theoretical study of the dissolution kinetics of galena and cerussite in an abandoned mining area (Zaida mine, Morocco)

Science.gov (United States)

El Alaoui, Lamiae; Dekayir, Abdelilah

2018-05-01

In the abandoned mine in Zaida, the pit lakes filled with water constitute significant water reserves. In these lakes, the waters are permanently in contact with ore deposit (cerussite and galena). The modelling of the interaction of waters with this mineralization shows that cerussite dissolves more rapidly than galena. This dissolution is controlled by the pH and dissolved oxygen concentration in solution. The lead concentrations recorded in these lakes come largely from the dissolution of cerussite.

Reuse and Securing of Mining Waste : Need of the hour

Science.gov (United States)

Mehta, Neha; Dino, Giovanna; Ajmone-Marsan, Franco; De Luca, Domenico Antonio

2016-04-01

agricultural soils can depend on Bio-accumulation factor, Translocation factor of heavy metals, species of plant grown and type of the natural biota of the surroundings and effect of different exposure routes. This also leads to the fact that more research is required in this area. Accordingly the same problem statement was chosen as part of a PhD research Project. The PhD research is part of REMEDIATE project (A Marie Sklodowska-Curie Action Initial Training Network for Improved decision making in contaminated land site investigation and risk assessment, Grant Agreement No. 643087). In this project the researcher will select a mining site in Italy to find possible solutions to the environmental impact of mining waste collected there. The project will focus on 1) physical and chemical characterization of waste 2)environmental risk assessment study of the mining waste 3) impact of mining waste on water bodies and soil 4) to discover possible routes of reuse and recovery of minerals from the waste. Thus project focuses on environmental sustainability of mining waste reuse and clean up. Keywords : Mining waste ; environmental risk assessment ;reuse and recovery.

Overview of mine drainage geochemistry at historical mines, Humboldt River basin and adjacent mining areas, Nevada. Chapter E.

Science.gov (United States)

Nash, J. Thomas; Stillings, Lisa L.

2004-01-01

Reconnaissance hydrogeochemical studies of the Humboldt River basin and adjacent areas of northern Nevada have identified local sources of acidic waters generated by historical mine workings and mine waste. The mine-related acidic waters are rare and generally flow less than a kilometer before being neutralized by natural processes. Where waters have a pH of less than about 3, particularly in the presence of sulfide minerals, the waters take on high to extremely high concentrations of many potentially toxic metals. The processes that create these acidic, metal-rich waters in Nevada are the same as for other parts of the world, but the scale of transport and the fate of metals are much more localized because of the ubiquitous presence of caliche soils. Acid mine drainage is rare in historical mining districts of northern Nevada, and the volume of drainage rarely exceeds about 20 gpm. My findings are in close agreement with those of Price and others (1995) who estimated that less than 0.05 percent of inactive and abandoned mines in Nevada are likely to be a concern for acid mine drainage. Most historical mining districts have no draining mines. Only in two districts (Hilltop and National) does water affected by mining flow into streams of significant size and length (more than 8 km). Water quality in even the worst cases is naturally attenuated to meet water-quality standards within about 1 km of the source. Only a few historical mines release acidic water with elevated metal concentrations to small streams that reach the Humboldt River, and these contaminants and are not detectable in the Humboldt. These reconnaissance studies offer encouraging evidence that abandoned mines in Nevada create only minimal and local water-quality problems. Natural attenuation processes are sufficient to compensate for these relatively small sources of contamination. These results may provide useful analogs for future mining in the Humboldt River basin, but attention must be given to

High resolution microgravity investigations for the detection and characterisation of subsidence associated with abandoned, coal, chalk and salt mines

Energy Technology Data Exchange (ETDEWEB)

Styles, P.; Toon, S.; Branston, M.; England, R. [Keele Univ., Applied And Environmental Geophysics Group, School of Physical and Geographical Sciences (United Kingdom); Thomas, E.; Mcgrath, R. [Geotechnology, Neath (United Kingdom)

2005-07-01

The closure and decay of industrial activity involving mining has scarred the landscape of urban areas and geo-hazards posed by subsurface cavities are ubiquitous throughout Europe. Features of concern consist of natural solution cavities (e.g. swallow holes and sinkholes in limestone gypsum and chalk) and man-made cavities (mine workings, shafts) in a great variety of post mining environments, including coal, salt, gypsum, anhydrite, tin and chalk. These problems restrict land utilisation, hinder regeneration, pose a threat to life, seriously damage property and services and blight property values. This paper outlines the application of microgravity techniques to characterise abandoned mining hazard in case studies from Coal, Chalk and Salt Mining environments in the UK. (authors)

High resolution microgravity investigations for the detection and characterisation of subsidence associated with abandoned, coal, chalk and salt mines

International Nuclear Information System (INIS)

Styles, P.; Toon, S.; Branston, M.; England, R.; Thomas, E.; Mcgrath, R.

2005-01-01

The closure and decay of industrial activity involving mining has scarred the landscape of urban areas and geo-hazards posed by subsurface cavities are ubiquitous throughout Europe. Features of concern consist of natural solution cavities (e.g. swallow holes and sinkholes in limestone gypsum and chalk) and man-made cavities (mine workings, shafts) in a great variety of post mining environments, including coal, salt, gypsum, anhydrite, tin and chalk. These problems restrict land utilisation, hinder regeneration, pose a threat to life, seriously damage property and services and blight property values. This paper outlines the application of microgravity techniques to characterise abandoned mining hazard in case studies from Coal, Chalk and Salt Mining environments in the UK. (authors)

Present and future mine effluents management at Zirovski Vrh uranium mine

International Nuclear Information System (INIS)

Logar, Z.; Likar, B.; Gantar, I.

2002-01-01

Zirovski Vrh uranium mine and its facilities are situated on the northeastern slopes of the Zirovski Vrh ridge (960 m) and on the southern slopes of Crna gora (611 m) respectively. Mine elevation is from 430 m (bottom of the valley) to 580 m (P-1 adit). All effluents from the mine and mill objects flow into the Brebovscica river (with average yearly flow of 0.74 m 3 /s): run off mine water; mine waste pile Jazbec outflow; mill tailings Borst outflows; effluents from mine temporary mine waste piles P-1, P-9, P-36 are of minor significance. The first three effluents and the recipient surface water flows (the Todrascica brook and the Brebovscica river) are monitored extensively. The impact of radioactive polluted outflows on named waters is proved, but far under the maximal permitted limit values. The authorised maximal limits values for mine effluents were obtained in 1996. Detail design will ensure that this values will not be exceeded in the future. The long term planes are to minimise the uranium concentrations in the run off mine water by target underground drilling. The mine waste pile and the mill tailings will be covered by engineered cover system to avoid clean water contamination by weathering and ablution as well. The existing effluents from the mill tailings will diminish after the remediation and consolidation of the tailing. The Government of Slovenia funds the remediation of the uranium production site Zirovski Vrh. Estimated needed funds for remediation of the main objects are shown in the table below. The total investment includes also the costs for effluents control. Area Mio US$ Underground mine remediation 19.00 Mine waste pile remediation 6.50 Mill tailings remediation 2.24 Total investment costs 27.74 Above figures do not include operation costs of the Zirovski Vrh Mine, approximately US$ 2.2 Mio per year nowadays. The last implementation schedule foresights the end of remediation works in year 2005. After that starts trial monitoring of 5 years

Hydrogeochemical assessment of mine-impacted water and sediment of iron ore mining

Science.gov (United States)

Nur Atirah Affandi, Fatin; Kusin, Faradiella Mohd; Aqilah Sulong, Nur; Madzin, Zafira

2018-04-01

This study was carried out to evaluate the hydrogeochemical behaviour of mine-impacted water and sediment of a former iron ore mining area. Sampling of mine water and sediment were carried out at selected locations within the mine including the former mining ponds, mine tailings and the nearby stream. The water samples were analysed for their hydrochemical facies, major and trace elements including heavy metals. The water in the mining ponds and the mine tailings was characterised as highly acidic (pH 2.54-3.07), but has near-neutral pH in the nearby stream. Results indicated that Fe and Mn in water have exceeded the recommended guidelines values and was also supported by the results of geochemical modelling. The results also indicated that sediments in the mining area were contaminated with Cd and As as shown by the potential ecological risk index values. The total risk index of heavy metals in the sediment were ranked in the order of Cd>As>Pb>Cu>Zn>Cr. Overall, the extent of potential ecological risks of the mining area were categorised as having low to moderate ecological risk.

Rapid construction of deep mines in the Donbass

Energy Technology Data Exchange (ETDEWEB)

Pshenichnyi, A A

1979-08-01

Highly effective models of mines with new technological and construction solutions designed to shorten building schedules were developed by design institutes of the Donbass under the leadership of the Ministries of the Coal Industry of the USSR and Ukrainian SSR. One arrangement described combining industrial facilities, an administrative and support buildings with buildings over the shaft in one complex reduces labor expenditure, transport between facilities and the total area from which earth must be removed. The introduction of simple technological flow charts for excavating a sector, the use of permanent structures and equipment guaranteeing effective ventilation are all measures which accelerate the time in which the mine can eventually be put into operation by 20 months and result in an overall saving of 33.81 million rubles. (In Russian)

Coordinating decentralized optimization of truck and shovel mining operations

Energy Technology Data Exchange (ETDEWEB)

Cheng, R.; Fraser Forbes, J. [Alberta Univ., Edmonton, AB (Canada). Dept. of Chemical and Materials Engineering; San Yip, W. [Suncor Energy, Fort McMurray, AB (Canada)

2006-07-01

Canada's oil sands contain the largest known reserve of oil in the world. Oil sands mining uses 3 functional processes, ore hauling, overburden removal and mechanical maintenance. The industry relies mainly on truck-and-shovel technology in its open-pit mining operations which contributes greatly to the overall mining operation cost. Coordination between operating units is crucial for achieving an enterprise-wide optimal operation level. Some of the challenges facing the industry include multiple or conflicting objectives such as minimizing the use of raw materials and energy while maximizing production. The large sets of constraints that define the feasible domain pose as challenge, as does the uncertainty in system parameters. One solution lies in assigning truck resources to various activities. This fully decentralized approach would treat the optimization of ore production, waste removal and equipment maintenance independently. It was emphasized that mine-wide optimal operation can only be achieved by coordinating ore hauling and overburden removal processes. For that reason, this presentation proposed a coordination approach for a decentralized optimization system. The approach is based on the Dantzig-Wolfe decomposition and auction-based methods that have been previously used to decompose large-scale optimization problems. The treatment of discrete variables and coordinator design was described and the method was illustrated with a simple truck and shovel mining simulation study. The approach can be applied to a wide range of applications such as coordinating decentralized optimal control systems and scheduling. 16 refs., 3 tabs., 2 figs.

76 FR 63238 - Proximity Detection Systems for Continuous Mining Machines in Underground Coal Mines

Science.gov (United States)

2011-10-12

... Detection Systems for Continuous Mining Machines in Underground Coal Mines AGENCY: Mine Safety and Health... Agency's proposed rule addressing Proximity Detection Systems for Continuous Mining Machines in... proposed rule for Proximity Detection Systems on Continuous Mining Machines in Underground Coal Mines. Due...

76 FR 70075 - Proximity Detection Systems for Continuous Mining Machines in Underground Coal Mines

Science.gov (United States)

2011-11-10

... Detection Systems for Continuous Mining Machines in Underground Coal Mines AGENCY: Mine Safety and Health... proposed rule addressing Proximity Detection Systems for Continuous Mining Machines in Underground Coal... Detection Systems for Continuous Mining Machines in Underground Coal Mines. MSHA conducted hearings on...

Determine Appropriate Post Mining Land Use in Indonesia Coal Mining Using Land Suitability Evaluation

OpenAIRE

Maryati, Sri; Shimada, Hideki; Hamanaka, Akihiro; Sasaoka, Takashi; Matsui, Kikuo

2012-01-01

Coal mining industry gives many benefits for Indonesia including contribution in total Indonesian GDP. Most of coal mines in Indonesia are open pit mining method which disturbs large area of land. One of open pit mining impact is damage land and related to soil erosion occurrences it will degrade land by top soil loses. Indonesia Government has issued mine closure regulation to encourage mining industry provide post mining land use. Determination of post mining land use should be considering ...

Options report for the mining, non-ferrous metal smelting and refining industry

International Nuclear Information System (INIS)

1999-10-01

This plant level analysis involved the study of three Canadian mines from ore extraction to refining. Energy consumption and GHG emissions from each facility were examined, along with projects to reduce these emissions. Results showed variation in emissions between firms by orders of magnitude, and while GHG reducing projects do exist, many are not implemented for economic and business reasons. Nevertheless, a modelling analysis of the mining industry as a whole showed that the industry should be able to reduce its GH emissions to within range of the Kyoto target. Enhanced voluntary initiatives, already supported by the industry, are seen as the most cost effective means of achieving these emission reductions. Industry experts suggest more effort to be expended on identifying GHG reducing technologies and competing projects with higher returns on investment. There is incontrovertible evidence that energy efficiency measures are often not implemented by the industry because their return on investment are not as attractive as those associated with process improvement projects. With appropriate assistance from government, such as funding for comprehensive energy audits similar to the plant level analysis done for this report, funding for carrying out the detailed economic evaluation of these projects, help with specialized human resources to participate in enhanced voluntary activities (such as the energy audits and life cycle cost/benefit analysis), and financial incentives to create more attractive returns on investment for energy efficiency/GHG emission reduction projects, the Canadian mining industry will be, and can be, part of the solution towards reducing GHG emissions. Other avenues that could be helpful in this effort include exporting Canadian mining technology to aid in reaching a global solution to a global problem, recognition for the Canadian mining industry for its northern operations, credit for Canada for embodied energy in exports, and recycling to

A new approach for economic evaluation of in-situ mining ventures

International Nuclear Information System (INIS)

Jacobson, R.H.; Gray, Z.A.

1985-01-01

This paper presents a method for evaluating the economic feasibility of solution mining a hypothetical uranium roll-front deposit. It is assumed the wellfield will be operated in a prudent manner and that leaching tests were performed in depth in both lab and field (push-pull) prior to startup. Leach test results are reduced to two important parameters and used as the basis for solution mining a wellfield. This case study assumes a 10 million-lb uranium deposit with 40 possible small wellfields; four are kept in operation simultaneously until the deposit is depleted. The wellfields have different ore reserves and grades, lixiviant circulation rates, leach rates, and peak concentrations, and thus the daily uranium production will vary. Daily production is used to assess the profitability of a particular lixiviant and the mode of wellfield operation in light of realistic market price estimates. The mathematical procedure is simple and straightforward, based on reasonable in-situ leaching relationships as well as accepted accounting practices

A Review of Financial Accounting Fraud Detection based on Data Mining Techniques

Science.gov (United States)

Sharma, Anuj; Kumar Panigrahi, Prabin

2012-02-01

With an upsurge in financial accounting fraud in the current economic scenario experienced, financial accounting fraud detection (FAFD) has become an emerging topic of great importance for academic, research and industries. The failure of internal auditing system of the organization in identifying the accounting frauds has lead to use of specialized procedures to detect financial accounting fraud, collective known as forensic accounting. Data mining techniques are providing great aid in financial accounting fraud detection, since dealing with the large data volumes and complexities of financial data are big challenges for forensic accounting. This paper presents a comprehensive review of the literature on the application of data mining techniques for the detection of financial accounting fraud and proposes a framework for data mining techniques based accounting fraud detection. The systematic and comprehensive literature review of the data mining techniques applicable to financial accounting fraud detection may provide a foundation to future research in this field. The findings of this review show that data mining techniques like logistic models, neural networks, Bayesian belief network, and decision trees have been applied most extensively to provide primary solutions to the problems inherent in the detection and classification of fraudulent data.

A guide to mines and mining houses of the Republic of South Africa

Energy Technology Data Exchange (ETDEWEB)

1989-02-01

This guide lists the mining houses of the Republic of South Africa and the mines under their respective control. It is intended as a guide for British exporters wishing to develop business with the South African mining industry and hence includes buying offices and senior buying personnel in South Africa (and in the UK where relevant). Amongst the 16 mining houses included are the Chamber of Mines of South Africa, De Beers Consolidated Mines Ltd., Rand Mines Ltd., Sasol Ltd. and the South African Iron and Steel Industrial Corporation Ltd.

Numerical Study on 4-1 Coal Seam of Xiaoming Mine in Ascending Mining

Science.gov (United States)

Tianwei, Lan; Hongwei, Zhang; Sheng, Li; Weihua, Song; Batugin, A. C.; Guoshui, Tang

2015-01-01

Coal seams ascending mining technology is very significant, since it influences the safety production and the liberation of dull coal, speeds up the construction of energy, improves the stability of stope, and reduces or avoids deep hard rock mining induced mine disaster. Combined with the Xiaoming ascending mining mine 4-1, by numerical calculation, the paper analyses ascending mining 4-1 factors, determines the feasibility of ascending mining 4-1 coalbed, and proposes roadway layout program about working face, which has broad economic and social benefits. PMID:25866840

Leach-SX-EW copper revalorization from overburden of abandoned copper mine Cerovo, Eastern Serbia

Directory of Open Access Journals (Sweden)

Stevanović Z.

2009-01-01

Full Text Available Hydrometallurgical processes for copper revalorization from overburden of abandoned mine Cerovo in Eastern Serbia were studied. Paper contain results of percolation leaching tests, performed with acidic mine waters accumulated in the bottom of the former open pit, followed by solvent extraction (SX and electrowinning (EW processes on achieved copper pregnant leach solutions. Usage of accumulated waste waters was objected to minimizing the environmental hazard due to uncontrolled leaking of these waters in nearby creeks and rivers. Chemical composition of acidic mine waters used for leaching tests was: (g/dm3: Cu - 0.201; Fe - 0.095; Mn - 0.041; Zn - 0.026; Ni - 0.0004; pH value - 3.3. Copper content in overburden sample used for leaching tests was 0.21% from which 64% were oxide copper minerals. In scope of leaching tests were examined influence of leaching solution pH values and iron (III concentration on copper recovery. It was established that for 120 hours of leaching on pH=1.5 without oxidant agents, copper concentration in pregnant leach solutions enriched up to 1.08g/dm3 which was enough for copper extraction from solution with SX-EW treatment. As extraction reagent in SX circuit was used LIX-984N in a kerosene diluent. Cathode current density in electrowinning cell was 220Am-2 while electrolyte temperature was kept on 50±2oC. Produced cathode copper at the end of SX-EW process has purity of 99.95% Cu.

Mining Web-based Educational Systems to Predict Student Learning Achievements

Directory of Open Access Journals (Sweden)

José del Campo-Ávila

2015-03-01

Full Text Available Educational Data Mining (EDM is getting great importance as a new interdisciplinary research field related to some other areas. It is directly connected with Web-based Educational Systems (WBES and Data Mining (DM, a fundamental part of Knowledge Discovery in Databases. The former defines the context: WBES store and manage huge amounts of data. Such data are increasingly growing and they contain hidden knowledge that could be very useful to the users (both teachers and students. It is desirable to identify such knowledge in the form of models, patterns or any other representation schema that allows a better exploitation of the system. The latter reveals itself as the tool to achieve such discovering. Data mining must afford very complex and different situations to reach quality solutions. Therefore, data mining is a research field where many advances are being done to accommodate and solve emerging problems. For this purpose, many techniques are usually considered. In this paper we study how data mining can be used to induce student models from the data acquired by a specific Web-based tool for adaptive testing, called SIETTE. Concretely we have used top down induction decision trees algorithms to extract the patterns because these models, decision trees, are easily understandable. In addition, the conducted validation processes have assured high quality models.

International SUSMIN-project aims at sustainable gold mining in EU

Science.gov (United States)

Backnäs, Soile; Neitola, Raisa; Turunen, Kaisa; Lima, Alexandre; Fiúza, António; Szlachta, Malgorzata; Wójtowicz, Patryk; Maftei, Raluca; Munteanu, Marian; Alakangas, Lena; Baciu, Calin; Fernández, Dámaris

2015-04-01

Although the gold demand has been constantly increasing in past years, the commodity findings have been decreasing and the extraction of gold has complicated due to increasing complexity and decreasing grade of the ores. Additionally, even gold mining could increase economical development, it has also challenges in eco-efficiency and extraction methods (e.g. cyanide). Thus, the novel energy and resource-efficient methods and technologies for mineral processing should be developed to concentrate selectively different gold bearing minerals. Furthermore, technologies for efficient treatment of mine waters, sustainable management of wastes, and methods to diminish environmental and social impacts of mining are needed. These problems will be addressed by the three year long project SUSMIN. The SUSMIN-project identifies and evaluates environmental impacts and economical challenges of gold mining within EU. The objective of the project is to increase the transnational cooperation and to support environmentally, socially and economically sustainable viable gold production. The focus is to develop and test geophysical techniques for gold exploration, eco-efficient ore beneficiation methods and alternatives for cyanide leaching. Additionally, the research will improve treatment methods for mine waters by the development and testing of advanced adsorbents. The research on socio-economic issues pursues to develop tools for enhancing the mechanisms of the corporate social responsibility as well as community engagement and management of the relations with the stakeholders. Moreover, with the environmental risk assessment and better knowledge of the geochemistry and long-term transformation of the contaminants in mining wastes and mine waters, the mining companies are able to predict and prevent the impacts to the surrounding environment, resulting in an improved environmental management solution. The SUSMIN consortium led by Geological Survey of Finland (GTK) includes seven

Ghana Mining Journal

African Journals Online (AJOL)

... in the Ghana mining journal: Geology and Mineral Exploration, Mining, Quarrying, Geomechanics, Groundwater Studies, Hydrocarbon Development, Mineral Processing, Metallurgy, Material Science, Mineral Management Policies, Mineral Economics, Environmental Aspects, Computer Applications and Mining Education.

Legal Policy Of Peoples Rights In Around Mining Corporate Post-Mining Activities

Directory of Open Access Journals (Sweden)

Teng Berlianty

2015-08-01

Full Text Available This study aims to gain an understanding of the essence of the rights of communities around post-mining corporate responsibility towards the fulfillment of the rights of communities around post-mining as well as government policies to protect the sustainability of the post-mining communities around the mining business. This type of research is a normative legal research methods using primary legal materials secondary and tertiary. With the approach of sociolegal through down the field in Gebe to get data concrete. Data were analyzed with qualitative analysis. The results showed that the essence of the rights of communities around mining operations after the mine in the form of the right to a decent life welfare the right to social security in the form of employment the guarantee of free education and healthcare for the local population as well as the right to a good environment and healthy as a guarantee of the continuity of human existence and future generations. These rights have not been fully realized post-mining. Corporate responsibility in accordance with Article 74 of Law No. 40 of 2007 on the fulfillment of the rights of communities around mining operations after the mine in the form of welfare responsibilities clothing food and shelter especially electricity and water have not been met then the social responsibility to empower communities around the mine as stakeholders as well as environmental responsibility. Legal policy such as the empowerment of communities around the mine in order to be self-sufficient after the post-mining public service policies in education and health as a form of existence of government using existing programs nationally and subordinate to the PT. Antam. as well as environmental protection policies in the form of post-mining reclamation formulated in the companys liabilities.

Geochemical Characterization of Mine Waste, Mine Drainage, and Stream Sediments at the Pike Hill Copper Mine Superfund Site, Orange County, Vermont

Science.gov (United States)

Piatak, Nadine M.; Seal, Robert R.; Hammarstrom, Jane M.; Kiah, Richard G.; Deacon, Jeffrey R.; Adams, Monique; Anthony, Michael W.; Briggs, Paul H.; Jackson, John C.

2006-01-01

The Pike Hill Copper Mine Superfund Site in the Vermont copper belt consists of the abandoned Smith, Eureka, and Union mines, all of which exploited Besshi-type massive sulfide deposits. The site was listed on the U.S. Environmental Protection Agency (USEPA) National Priorities List in 2004 due to aquatic ecosystem impacts. This study was intended to be a precursor to a formal remedial investigation by the USEPA, and it focused on the characterization of mine waste, mine drainage, and stream sediments. A related study investigated the effects of the mine drainage on downstream surface waters. The potential for mine waste and drainage to have an adverse impact on aquatic ecosystems, on drinking- water supplies, and to human health was assessed on the basis of mineralogy, chemical concentrations, acid generation, and potential for metals to be leached from mine waste and soils. The results were compared to those from analyses of other Vermont copper belt Superfund sites, the Elizabeth Mine and Ely Copper Mine, to evaluate if the waste material at the Pike Hill Copper Mine was sufficiently similar to that of the other mine sites that USEPA can streamline the evaluation of remediation technologies. Mine-waste samples consisted of oxidized and unoxidized sulfidic ore and waste rock, and flotation-mill tailings. These samples contained as much as 16 weight percent sulfides that included chalcopyrite, pyrite, pyrrhotite, and sphalerite. During oxidation, sulfides weather and may release potentially toxic trace elements and may produce acid. In addition, soluble efflorescent sulfate salts were identified at the mines; during rain events, the dissolution of these salts contributes acid and metals to receiving waters. Mine waste contained concentrations of cadmium, copper, and iron that exceeded USEPA Preliminary Remediation Goals. The concentrations of selenium in mine waste were higher than the average composition of eastern United States soils. Most mine waste was

Characterization and treatment of artisanal gold mine tailings

International Nuclear Information System (INIS)

Andrade Lima, L.R.P. de; Bernardez, L.A.; Barbosa, L.A.D.

2008-01-01

The solid waste generated by artisanal gold mining, with high mercury and gold contents, can be found in several areas in the South America. The present study focused on the tailings of an artisanal gold mine area located in the Brazilian northeastern. Samples of the mine tailings were taken and used to perform a physical and chemical characterization study using X-ray diffraction, scanning electron microscopy, neutron activation, X-ray fluorescence, induced coupled plasma-mass spectrometry, among others analytical methods. The results indicate that the material is composed mainly by quartz and goethite, the characteristic size of the particles (d 50 ) is about 150 μm, and the density is close of that of quartz. The main constituents are silicon, iron, and aluminum. The tailings gold content is of about 1.8 mg/kg and the mercury content is of about 10 mg/kg. A remarkable feature of this solid waste is that the gold and mercury are both concentrated in both the fine and the coarse particles, but not in particles of intermediary size. Leaching studies indicated that the tailings are stable in weak organic acids, but soluble in alkaline and aired cyanide solutions, in which 89% of gold and 100% of mercury are extracted in 24 h. Electroleaching experiments, performed using sodium chloride as electrolyte, indicated that mercury and gold are extracted simultaneously and the recovery of both metals can be as high as 70% in 4 h. In addition, chromium, nickel, and lead are found in relatively large amounts in the solution, which indicate an effectively action of the electroleaching method to clean up solid wastes contaminated with metals

Mine drainage treatment

OpenAIRE

Golomeova, Mirjana; Zendelska, Afrodita; Krstev, Boris; Golomeov, Blagoj; Krstev, Aleksandar

2012-01-01

Water flowing from underground and surface mines and contains high concentrations of dissolved metals is called mine drainage. Mine drainage can be categorized into several basic types by their alkalinity or acidity. Sulfide rich and carbonate poor materials are expected to produce acidic drainage, and alkaline rich materials, even with significant sulfide concentrations, often produce net alkaline water. Mine drainages are dangerous because pollutants may decompose in the environment. In...

Mining dictionary: underground mining; open-cast mining; preparation and beneficiation; geology of mineral deposits

Energy Technology Data Exchange (ETDEWEB)

Goergen, H; Stoll, R D; Vriesen, R D; Welzenberg, B

1981-01-01

The dictionary reflects the latest technical developments in the vocabulary of mining methods and the mining industry. Volume I of the dictionary is English to German, Volume II German to English. 36,000 entries are included.

Heavy metal leaching from mine tailings as affected by plants

Energy Technology Data Exchange (ETDEWEB)

Zhu, D.; Schwab, A.P.; Banks, M.K.

1999-12-01

A column experiment was conducted to determine the impact of soil cover and plants on heavy metal leaching from mine tailings and heavy metal contaminated soil. Columns made of PVC were constructed with 30 cm subsoil covered by 30 cm of mine tailings followed by 0, 30, or 60 cm subsoil covered by 30 cm of mine tailings followed by 0, 30, or 60 cm of clean topsoil. Two grasses, tall fescue (Festuca arundinacea Schreb.) and big bluestem (Andropogon gerardii), were grown in the columns. The columns were leached at a slow rate for 1 yr with a 0.001 M CaCl{sub 2} solution under unsaturated conditions. The presence of both tall fescue and big bluestem increased Zn and Cd concentrations in the leachate. Lead concentrations in leachates were not affected by the presence of plants. Although plants generally reduced the total amount of water leached, total mass of Zn and Cd leached generally was not impacted by plants. Total mass of Pb leached was positively correlated with total leachate collected from each column. Covering the mine tailings with 60 cm of topsoil increased the mass of Zn and Cd leached relative to no topsoil. When the subsoil was absent, Zn and Cd leaching increased by as much as 20-fold, verifying the ability of soil to act as a sink for metals. Mine tailing remediation by establishing vegetation can reduce Pb movement but may enhance short-term Cd and Zn leaching. However, the changes were relatively small and do not outweigh the benefits of using vegetation in mine tailings reclamation.

Application of a cross-pit bridge conveyor system in mining

Energy Technology Data Exchange (ETDEWEB)

Zeindler, R.W. (Krupp Canada Inc., Calgary, Alberta); Fawcett, D.A.

1981-04-01

A summary is presented of the report completed by the Coal Mining Research Centre in 1980. This report was of a cross-pit conveyor system applied as an auxillary mining complement to the major stripping unit, a dragline. The purpose of the CMRC report was to evaluate selective mining and replacement of the upper horizons of the strata as an aid in reclamation. These strata were the topsoil, subsoil and glacial till. Past utilization of cross-pit conveyor systems and related engineering studies were assessed. The parameters of the study were based on the mining and geological conditions of the Alberta prairie coal mines. The principal excavator for stripping was a dragline. Excavation of the upper horizons was done by a bucket-wheel excavator discharging onto the cross-pit conveyor. Alternative equipment applications were economically compared. Four cases or geological sections were evaluated in detail. The economics of the alternative mining systems for each of the cases were determined. In all instances, the most economical solution was a tandem system utilizing a dragline with a bucket-wheel excavator/cross-pit conveyor system. For both the CMRC study and a similar US paper, the application of a tandem system provided the lowest annual ownership and operating costs. The tandem system consists of a dragline excavating and casting the majority of the waste or overburden and a BWE/CPCS selectively excavating and replacing the topsoil, subsoil and part of the unconsolidated overburden. The bridge spans and designs are within known technical and economic limits.

Data mining teaching throughout cards game competition

OpenAIRE

Antoñanzas-Torres, Javier; Urraca, Ruben; Sodupe-Ortega, Enrique; Martínez-de-Pison, Francisco; Pernía-Espinoza, Alpha

2015-01-01

[EN] Data-mining techniques and statistical metrics learning can be complicated because of the complexity and overwhelming nature of this field. In this paper a class competition to improve learning of designing Decision Support Systems (DSS) by playing a classic cards game named "Copo" is proposed. The fact that this game is based on a probabilistic problem and that different solutions can be obtained represents a very typical kind of problem in the field of engineering and compu...

Using an improved association rules mining optimization algorithm in web-based mobile-learning system

Science.gov (United States)

Huang, Yin; Chen, Jianhua; Xiong, Shaojun

2009-07-01

Mobile-Learning (M-learning) makes many learners get the advantages of both traditional learning and E-learning. Currently, Web-based Mobile-Learning Systems have created many new ways and defined new relationships between educators and learners. Association rule mining is one of the most important fields in data mining and knowledge discovery in databases. Rules explosion is a serious problem which causes great concerns, as conventional mining algorithms often produce too many rules for decision makers to digest. Since Web-based Mobile-Learning System collects vast amounts of student profile data, data mining and knowledge discovery techniques can be applied to find interesting relationships between attributes of learners, assessments, the solution strategies adopted by learners and so on. Therefore ,this paper focus on a new data-mining algorithm, combined with the advantages of genetic algorithm and simulated annealing algorithm , called ARGSA(Association rules based on an improved Genetic Simulated Annealing Algorithm), to mine the association rules. This paper first takes advantage of the Parallel Genetic Algorithm and Simulated Algorithm designed specifically for discovering association rules. Moreover, the analysis and experiment are also made to show the proposed method is superior to the Apriori algorithm in this Mobile-Learning system.

Mining Views : database views for data mining

NARCIS (Netherlands)

Blockeel, H.; Calders, T.; Fromont, É.; Goethals, B.; Prado, A.; Nijssen, S.; De Raedt, L.

2007-01-01

We propose a relational database model towards the integration of data mining into relational database systems, based on the so called virtual mining views. We show that several types of patterns and models over the data, such as itemsets, association rules, decision trees and clusterings, can be

Coastal mining

Science.gov (United States)

Bell, Peter M.

The Exclusive Economic Zone (EEZ) declared by President Reagan in March 1983 has met with a mixed response from those who would benefit from a guaranteed, 200-nautical-mile (370-km) protected underwater mining zone off the coasts of the United States and its possessions. On the one hand, the U.S. Department of the Interior is looking ahead and has been very successful in safeguarding important natural resources that will be needed in the coming decades. On the other hand, the mining industry is faced with a depressed metals and mining market.A report of the Exclusive Economic Zone Symposium held in November 1983 by the U.S. Geological Survey, the Mineral Management Service, and the Bureau of Mines described the mixed response as: “ … The Department of Interior … raring to go into promotion of deep-seal mining but industrial consortia being very pessimistic about the program, at least for the next 30 or so years.” (Chemical & Engineering News, February 5, 1983).

21 Recipes for Mining Twitter

CERN Document Server

Russell, Matthew

2011-01-01

Millions of public Twitter streams harbor a wealth of data, and once you mine them, you can gain some valuable insights. This short and concise book offers a collection of recipes to help you extract nuggets of Twitter information using easy-to-learn Python tools. Each recipe offers a discussion of how and why the solution works, so you can quickly adapt it to fit your particular needs. The recipes include techniques to: Use OAuth to access Twitter dataCreate and analyze graphs of retweet relationshipsUse the streaming API to harvest tweets in realtimeHarvest and analyze friends and followers

Specialized mining GIS system MineGIS SMZ Jelšava

Directory of Open Access Journals (Sweden)

Peter Sasvári

2005-12-01

Full Text Available Following, the real needs for new mining information system requested by SMZ Jelšava, the Department of Mineral Deposits and Applied Geology (KLaAG at the Technical University of Košice (TUKE has prepared a specification for the specialized mining geographic information system called MineGIS SMZ Jelšava. The main roles of the new system have been defined as follows of reserves: the administration, analyse and the visualization of all mining geo-data related to the estimation.

Testing and modeling the influence of reclamation and control methods for reducing nonpoint mercury emissions associated with industrial open pit gold mines.

Science.gov (United States)

Miller, Matthieu B; Gustin, Mae S

2013-06-01

Industrial gold mining is a significant source of mercury (Hg) emission to the atmosphere. To investigate ways to reduce these emissions, reclamation and dust and mercury control methods used at open pit gold mining operations in Nevada were studied in a laboratory setting. Using this information along with field data, and building off previous work, total annual Hg emissions were estimated for two active gold mines in northern Nevada. Results showed that capping mining waste materials with a low-Hg substrate can reduce Hg emissions from 50 to nearly 100%. The spraying of typical dust control solutions often results in higher Hg emissions, especially as materials dry after application. The concentrated application of a dithiocarbamate Hg control reagent appears to reduce Hg emissions, but further testing mimicking the actual distribution of this chemical within an active leach solution is needed to make a more definitive assessment.

South African mine valuation

Energy Technology Data Exchange (ETDEWEB)

Storrar, C D

1977-01-01

This article sets out the basic concepts of mine valuation, with gold mining receiving more space than base minerals and coal. Sampling practice is given special attention. Chapter headings are methods of investigation, sampling, underground sampling, averaging of underground sampling, diamond-drill sampling, mass and mineral content of ore, organization of a sample office, working costs, mining pay limits, ore reserves, ore accounting, maintenance of grade, forecasting operations and life of mine, statistical mine valuation, state's share of profits and taxation, and financial valuation of mining ventures.

A concept for the modernization of underground mining master maps based on the enrichment of data definitions and spatial database technology

Directory of Open Access Journals (Sweden)

Krawczyk Artur

2018-01-01

Full Text Available In this article, topics regarding the technical and legal aspects of creating digital underground mining maps are described. Currently used technologies and solutions for creating, storing and making digital maps accessible are described in the context of the Polish mining industry. Also, some problems with the use of these technologies are identified and described. One of the identified problems is the need to expand the range of mining map data provided by survey departments to other mining departments, such as ventilation maintenance or geological maintenance. Three solutions are proposed and analyzed, and one is chosen for further analysis. The analysis concerns data storage and making survey data accessible not only from paper documentation, but also directly from computer systems. Based on enrichment data, new processing procedures are proposed for a new way of presenting information that allows the preparation of new cartographic representations (symbols of data with regard to users’ needs.

Mercury volatilisation and phytoextraction from base-metal mine tailings

International Nuclear Information System (INIS)

Moreno, Fabio N.; Anderson, Chris W.N.; Stewart, Robert B.; Robinson, Brett H.

2005-01-01

Experiments were carried out in plant growth chambers and in the field to investigate plant-mercury accumulation and volatilisation in the presence of thiosulphate (S 2 O 3 )-containing solutions. Brassica juncea (Indian mustard) plants grown in Hg-contaminated Tui mine tailings (New Zealand) were enclosed in gastight volatilisation chambers to investigate the effect of ammonium thiosulphate ([NH 4 ] 2 S 2 O 3 ) on the plant-Hg volatilisation process. Application of (NH 4 ) 2 S 2 O 3 to substrates increased up to 6 times the Hg concentration in shoots and roots of B. juncea relative to controls. Volatilisation rates were significantly higher in plants irrigated only with water (control) when compared to plants treated with (NH 4 ) 2 S 2 O 3 . Volatilisation from barren pots (without plants) indicated that Hg in tailings is subject to biological and photochemical reactions. Addition of sodium thiosulphate (Na 2 S 2 O 3 ) at 5 g/kg of substrate to B. juncea plants grown at the Tui mine site confirmed the plant growth chambers studies showing the effectiveness of thio-solutions at enhancing shoot Hg concentrations. Mercury extraction from the field plots yielded a maximum value of 25 g/ha. Mass balance studies revealed that volatilisation is a dominant pathway for Hg removal from the Tui mine site. A preliminary assessment of the risks of volatilisation indicated that enhanced Hg emissions by plants would not harm the local population and the regional environment. - Mass balance studies indicated that volatilisation was a dominant pathway for mercury removal

Use of IT platform in determination of efficiency of mining machines

Science.gov (United States)

Brodny, Jarosław; Tutak, Magdalena

2018-01-01

Determination of effective use of mining devices has very significant meaning for mining enterprises. High costs of their purchase and tenancy cause that these enterprises tend to the best use of possessed technical potential. However, specifics of mining production causes that this process not always proceeds without interferences. Practical experiences show that determination of objective measure of utilization of machine in mining enterprise is not simple. In the paper a proposition for solution of this problem is presented. For this purpose an IT platform and overall efficiency model OEE were used. This model enables to evaluate the machine in a range of its availability performance and quality of product, and constitutes a quantitative tool of TPM strategy. Adapted to the specificity of mining branch the OEE model together with acquired data from industrial automatic system enabled to determine the partial indicators and overall efficiency of tested machines. Studies were performed for a set of machines directly use in coal exploitation process. They were: longwall-shearer and armoured face conveyor, and beam stage loader. Obtained results clearly indicate that degree of use of machines by mining enterprises are unsatisfactory. Use of IT platforms will significantly facilitate the process of registration, archiving and analytical processing of the acquired data. In the paper there is presented methodology of determination of partial indices and total OEE together with a practical example of its application for investigated machines set. Also IT platform was characterized for its construction, function and application.

Microbes from mined sites: Harnessing their potential for reclamation of derelict mine sites

International Nuclear Information System (INIS)

Thavamani, Palanisami; Samkumar, R. Amos; Satheesh, Viswanathan; Subashchandrabose, Suresh R.; Ramadass, Kavitha; Naidu, Ravi; Venkateswarlu, Kadiyala; Megharaj, Mallavarapu

2017-01-01

Derelict mines pose potential risks to environmental health. Several factors such as soil structure, organic matter, and nutrient content are the greatly affected qualities in mined soils. Soil microbial communities are an important element for successful reclamation because of their major role in nutrient cycling, plant establishment, geochemical transformations, and soil formation. Yet, microorganisms generally remain an undervalued asset in mined sites. The microbial diversity in derelict mine sites consists of diverse species belonging to four key phyla: Proteobacteria, Acidobacteria, Firmicutes, and Bacteroidetes. The activity of plant symbiotic microorganisms including root-colonizing rhizobacteria and ectomycorrhizal fungi of existing vegetation in the mined sites is very high since most of these microbes are extremophiles. This review outlines the importance of microorganisms to soil health and the rehabilitation of derelict mines and how microbial activity and diversity can be exploited to better plan the soil rehabilitation. Besides highlighting the major breakthroughs in the application of microorganisms for mined site reclamation, we provide a critical view on plant−microbiome interactions to improve revegetation at the mined sites. Also, the need has been emphasized for deciphering the molecular mechanisms of adaptation and resistance of rhizosphere and non-rhizosphere microbes in abandoned mine sites, understanding their role in remediation, and subsequent harnessing of their potential to pave the way in future rehabilitation strategies for mined sites. - Highlights: • Abandoned mines pose potential risks to human and environmental health. • Re-establishment of a self-sustaining vegetative cover at derelict mines is a major challenge. • Soil microbial communities are very important for successful reclamation of mined sites. • Role of microorganisms in soil function in derelict mines needs to be understood.

Recent solution of the distributed control and measurement system in the Jeronym Mine - modular system

Czech Academy of Sciences Publication Activity Database

Knejzlík, Jaromír; Rambouský, Zdeněk

2008-01-01

Roč. 5, č. 2 (2008), s. 205-212 ISSN 1214-9705 R&D Projects: GA ČR GA105/06/0068 Institutional research plan: CEZ:AV0Z30860518 Keywords : Jeronym Mine * geomechanical monitoring * seismological monitoring Subject RIV: DC - Siesmology, Volcanology, Earth Structure

Biosorption of metal and salt tolerant microbial isolates from a former uranium mining area. Their impact on changes in rare earth element patterns in acid mine drainage.

Science.gov (United States)

Haferburg, Götz; Merten, Dirk; Büchel, Georg; Kothe, Erika

2007-12-01

The concentration of metals in microbial habitats influenced by mining operations can reach enormous values. Worldwide, much emphasis is placed on the research of resistance and biosorptive capacities of microorganisms suitable for bioremediation purposes. Using a collection of isolates from a former uranium mining area in Eastern Thuringia, Germany, this study presents three Gram-positive bacterial strains with distinct metal tolerances. These strains were identified as members of the genera Bacillus, Micrococcus and Streptomyces. Acid mine drainage (AMD) originating from the same mining area is characterized by high metal concentrations of a broad range of elements and a very low pH. AMD was analyzed and used as incubation solution. The sorption of rare earth elements (REE), aluminum, cobalt, copper, manganese, nickel, strontium, and uranium through selected strains was studied during a time course of four weeks. Biosorption was investigated after one hour, one week and four weeks by analyzing the concentrations of metals in supernatant and biomass. Additionally, dead biomass was investigated after four weeks of incubation. The maximum of metal removal was reached after one week. Up to 80% of both Al and Cu, and more than 60% of U was shown to be removed from the solution. High concentrations of metals could be bound to the biomass, as for example 2.2 mg/g U. The strains could survive four weeks of incubation. Distinct and different patterns of rare earth elements of the inoculated and non-inoculated AMD water were observed. Changes in REE patterns hint at different binding types of heavy metals regarding incubation time and metabolic activity of the cells. (c) 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Inventory of closed and abandoned mines : Methods for performing the inventory and for risk classification with diverse data availability levels

OpenAIRE

Luodes, Nike M.

2013-01-01

The traditional mining techniques have not been aware of the importance of the long term effects that the mining activity can cause: the main being represented by Acid Mine Drainage where chemical changes in sulphide rich tailings can bring in solution heavy metals, penetrate through the containing structure access and accumulate in the environment. The abandoned and unstable facilities located on the site can by their own represent risks for people and animals accessing the area. Several cou...

Mining Views : database views for data mining

NARCIS (Netherlands)

Blockeel, H.; Calders, T.; Fromont, É.; Goethals, B.; Prado, A.

2008-01-01

We present a system towards the integration of data mining into relational databases. To this end, a relational database model is proposed, based on the so called virtual mining views. We show that several types of patterns and models over the data, such as itemsets, association rules and decision

Freshwater Ecosystem Services in Mining Regions: Modelling Options for Policy Development Support

Directory of Open Access Journals (Sweden)

Daniel Mercado-Garcia

2018-04-01

Full Text Available The ecosystem services (ES approach offers an integrated perspective of social-ecological systems, suitable for holistic assessments of mining impacts. Yet for ES models to be policy-relevant, methodological consensus in mining contexts is needed. We review articles assessing ES in mining areas focusing on freshwater components and policy support potential. Twenty-six articles were analysed concerning (i methodological complexity (data types, number of parameters, processes and ecosystem–human integration level and (ii potential applicability for policy development (communication of uncertainties, scenario simulation, stakeholder participation and management recommendations. Articles illustrate mining impacts on ES through valuation exercises mostly. However, the lack of ground- and surface-water measurements, as well as insufficient representation of the connectivity among soil, water and humans, leave room for improvements. Inclusion of mining-specific environmental stressors models, increasing resolution of topographies, determination of baseline ES patterns and inclusion of multi-stakeholder perspectives are advantageous for policy support. We argue that achieving more holistic assessments exhorts practitioners to aim for high social-ecological connectivity using mechanistic models where possible and using inductive methods only where necessary. Due to data constraints, cause–effect networks might be the most feasible and best solution. Thus, a policy-oriented framework is proposed, in which data science is directed to environmental modelling for analysis of mining impacts on water ES.

Experimental study and numerical modelling of geochemical reactions occurring during uranium in situ recovery (ISR) mining

International Nuclear Information System (INIS)

Ben Simon, R.

2011-09-01

The in situ Recovery (ISR) method consists of ore mining by in situ chemical leaching with acid or alkaline solutions. ISR takes place underground and is therefore limited to the analysis of the pumped solutions, hence ISR mine management is still empirical. Numerical modelling has been considered to achieve more efficient management of this process. Three different phenomena have to be taken into account for numerical simulations of uranium ISR mining: (1) geochemical reactions; (2) the kinetics of these reactions, and (3) hydrodynamic transport with respect to the reaction kinetics. Leaching tests have been conducted on ore samples from an uranium mine in Tortkuduk (Kazakhstan) where ISR is conducted by acid leaching. Two types of leaching experiments were performed: (1) tests in batch reactors; and (2) extraction in flow through columns. The assumptions deduced from the leaching tests were tested and validated by modelling the laboratory experiments with the numerical codes CHESS and HYTEC, both developed at the Geosciences research center of Mines ParisTech. A well-constrained 1D hydrogeochemical transport model of the ISR process at laboratory-scale was proposed. It enables to translate the chemical release sequence that is observed during experiments into a geochemical reaction sequence. It was possible to highlight the controlling factors of uranium dissolution, and the precipitation of secondary mineral phase in the deposit, as well as the determination of the relative importance of these factors. (author)

High utility-itemset mining and privacy-preserving utility mining

Directory of Open Access Journals (Sweden)

Jerry Chun-Wei Lin

2016-03-01

Full Text Available In recent decades, high-utility itemset mining (HUIM has emerging a critical research topic since the quantity and profit factors are both concerned to mine the high-utility itemsets (HUIs. Generally, data mining is commonly used to discover interesting and useful knowledge from massive data. It may, however, lead to privacy threats if private or secure information (e.g., HUIs are published in the public place or misused. In this paper, we focus on the issues of HUIM and privacy-preserving utility mining (PPUM, and present two evolutionary algorithms to respectively mine HUIs and hide the sensitive high-utility itemsets in PPUM. Extensive experiments showed that the two proposed models for the applications of HUIM and PPUM can not only generate the high quality profitable itemsets according to the user-specified minimum utility threshold, but also enable the capability of privacy preserving for private or secure information (e.g., HUIs in real-word applications.

Using text mining for study identification in systematic reviews: a systematic review of current approaches

OpenAIRE

O?Mara-Eves, Alison; Thomas, James; McNaught, John; Miwa, Makoto; Ananiadou, Sophia

2015-01-01

Background The large and growing number of published studies, and their increasing rate of publication, makes the task of identifying relevant studies in an unbiased way for inclusion in systematic reviews both complex and time consuming. Text mining has been offered as a potential solution: through automating some of the screening process, reviewer time can be saved. The evidence base around the use of text mining for screening has not yet been pulled together systematically; this systematic...

76 FR 54163 - Proximity Detection Systems for Continuous Mining Machines in Underground Coal Mines

Science.gov (United States)

2011-08-31

... Detection Systems for Continuous Mining Machines in Underground Coal Mines AGENCY: Mine Safety and Health... (except full-face continuous mining machines) with proximity detection systems. Miners working near..., each underground coal mine operator would be required to install proximity detection systems on...

Uranium mine ventilation

International Nuclear Information System (INIS)

Katam, K.; Sudarsono

1982-01-01

Uranium mine ventilation system aimed basically to control and decreasing the air radioactivity in mine caused by the radon emanating from uranium ore. The control and decreasing the air ''age'' in mine, with adding the air consumption volume, increasing the air rate consumption, closing the mine-out area; using closed drainage system. Air consumption should be 60m 3 /minute for each 9m 2 uranium ore surfaces with ventilation rate of 15m/minute. (author)

Appalachian mine soil morphology and properties: Effects of weathering and mining method

Energy Technology Data Exchange (ETDEWEB)

Haering, K.C.; Daniels, W.L.; Galbraith, J.M. [Virginia Polytechnic Institute & State University, Blacksburg, VA (United States)

2004-08-01

Surface coal mining and reclamation methods in the Appalachians have changed dramatically since the passage of the Surface Mining Control and Reclamation Act (SMCRA) of 1977 and subsequent improvements in mining and reclamation technology. In this study, 30 pre-SMCRA mine soil profiles (4-20 yr old) were examined and sampled in 1980 and compared with 20 mine soil profiles (8-13 yr old) described in the same area in 2002 after it had been completely remined by modern deep cut methods. Mine soils in both sampling years had high rock fragment content (42-81%), relatively well-developed A horizons, and generally exhibited A-C or A-AC-C horizonation. Although six Bw horizons were described in 1980, only two met all requirements for cambic horizons. The 1980 mine soils developed in overburden dominated by oxidized, preweathered material due to relatively shallow mining cuts. The 1980 mine soils had lower rock fragment content, finer textures, lower pH, and tended to be more heterogeneous in horizonation, morphology, and texture than soils observed in 2002, which had formed primarily in unweathered overburden from deeper cuts. Half the pedons sampled in both years had densic materials within 70 cm of the surface. Four poorly to very poorly drained soil profiles were described in each sampling year containing distinct hydric soil indicators in surface horizons. While older pre-SMCRA mine soils do have many properties in common with newer mine soils, their properties are highly influenced by the fact that they generally have formed in more weathered overburden from higher in the geologic column. Overall, Appalachian mine soils are much more complex in subsoil morphology than commonly assumed, and differential compaction greatly complicates their internal drainage and limits their overall productivity potential.

First Mining workshop of Mining and metallurgical of MERCOSUR

International Nuclear Information System (INIS)

1994-01-01

In the city of Montevideo, capital of the Oriental Republic of Uruguay, at 23 days of September 1994, under the First Meeting of Mercosur Mining Metallurgical, meet representatives of the mining sector in the countries signed the Treaty of Asuncion , attended as observers, authorities of the Republic of Bolivia and Ecuador and representatives of the productive labor, legislative and research. The primary objective is to integrate the mining sectors of those countries, taking into account the specificity of the mining, given by the resource it uses, the need for high-risk investment with slow recoveries of capital and infrastructure problems, taking into account leverage and its remarkable impact on the development of regional economies.

Mining by-products show potential

International Nuclear Information System (INIS)

Douglas, Grant

2013-01-01

Full text: Many mining and industrial processes generate wastewater that contains a variety of contaminants, such as metals and metalloids. These must be removed to ensure the wastewater is suitable for reuse or safe discharge to the environment. However, mining wastewater treatment processes have traditionally been difficult due to the large range of different contaminants present, requiring a number of complex steps. In current processes, the mining industry generally adds lime to the wastewater to purify it. While often effective, the key issue with this method has been the volume of sludge that forms and the subsequent problems with dealing with this sludge - either to extract the contained water, which often requires additional treatment, or to find enough space for long-term disposal. This complex practice could end soon thanks to a new treatment solution that utilises hydrotalcites. Developed by CSIRO, the treatment overcomes the complexities of lime-based methods and offers a simpler and more water smart process. The CSIRO team found that hydrotalcites, which are layered minerals consisting of aluminium- and magnesium- rich layers, can simultaneously remove a variety of contaminants in wastewater in a single step. Scientists noticed that hydrotalcites begin to form when aluminium and magnesium are present at an ideal ratio and under conditions during neutralisation of acidic waters. As hydrotalcites form, the contaminants become trapped and are easily removed from the wastewater as a solid. Mining wastewater often contains substantial magnesium and aluminium concentrations. This means that we can create hydrotalcites utilising common contaminants that are already present in the wastewater, by simply adjusting their concentrations and adding alkaline compounds to rapidly increase pH. Initial applications have focussed on treating wastewater generated from the mining and extraction of uranium. A range of contaminants including uranium, rare earth elements

Restoration and revitalization of areas of the Severoceske doly a.s. Chomutov company damaged by mining activities

Energy Technology Data Exchange (ETDEWEB)

Ondracek, V.; Brabenec, J. [North Bohemian Mines, Chomutov (Czech Republic); Rehor, M. [Brown Coal Research Inst., Most (Czech Republic)

2010-07-01

Brown coal is of significant importance as a raw material to the Czech Republic as a result of increasing energy demands. It is the primary fossil fuel of homes in the Czech Republic, without which it would become fully dependent on energy source imports. Founded in 1994, the Severoceske doly a.s. company is the greatest mining company of the Czech Republic. The Severoceske doly, a.s. Chomutov joint stock company mining is drawn up in open pit mines and uses continual technology with excavators, long distance conveyers, and stackers. Large area external and internal dumps remain after the final stages of mining and quarrying. This paper summarized the basic facts about Severoceske doly a.s mining company, with particular reference to revitalization and restoration activities. The paper focused on restoration efforts in the Bilina Mines localities and Nastup Tusimice Mines, and on modern restoration methodology, and the application of research and science. It was concluded that a solution can be found that would fundamentally limit negative impacts to the landscape of brown coal areas using knowledge of rock characteristics relocated by mining and all the relationships in the area's surroundings. 4 refs., 2 tabs., 2 figs.

On 3D Geo-visualization of a Mine Surface Plant and Mine Roadway

Institute of Scientific and Technical Information of China (English)

WANG Yunjia; FU Yongming; FU Erjiang

2007-01-01

Constructing the 3D virtual scene of a coal mine is the objective requirement for modernizing and processing information on coal mining production. It is also the key technology to establish a "digital mine". By exploring current worldwide research, software and hardware tools and application demands, combined with the case study site (the Dazhuang mine of Pingdingshan coal group), an approach for 3D geo-visualization of a mine surface plant and mine roadway is deeply discussed. In this study, the rapid modeling method for a large range virtual scene based on Arc/Info and SiteBuilder3D is studied, and automatic generation of a 3D scene from a 2D scene is realized. Such an automatic method which can convert mine roadway systems from 2D to 3D is realized for the Dazhuang mine. Some relevant application questions are studied, including attribute query, coordinate query, distance measure, collision detection and the dynamic interaction between 2D and 3D virtual scenes in the virtual scene of a mine surface plant and mine roadway. A prototype system is designed and developed.

Survey of nine surface mines in North America. [Nine different mines in USA and Canada

Energy Technology Data Exchange (ETDEWEB)

Hayes, L.G.; Brackett, R.D.; Floyd, F.D.

1981-01-01

This report presents the information gathered by three mining engineers in a 1980 survey of nine surface mines in the United States and Canada. The mines visited included seven coal mines, one copper mine, and one tar sands mine selected as representative of present state of the art in open pit, strip, and terrace pit mining. The purpose of the survey was to investigate mining methods, equipment requirements, operating costs, reclamation procedures and costs, and other aspects of current surface mining practices in order to acquire basic data for a study comparing conventional and terrace pit mining methods, particularly in deeper overburdens. The survey was conducted as part of a project under DOE Contract No. DE-AC01-79ET10023 titled The Development of Optimal Terrace Pit Coal Mining Systems.

Simulation of Industrial Wastewater Treatment from the Suspended Impurities into the Flooded Waste Mining Workings

Science.gov (United States)

Bondareva, L.; Zakharov, Yu; Goudov, A.

2017-04-01

The paper is dedicated to the mathematical model of slurry wastewater treatment and disposal in a flooded mine working. The goal of the research is to develop and analyze the mathematical model of suspended impurities flow and distribution. Impurity sedimentation model is under consideration. Due to the sediment compaction problem solution domain can be modified. The model allows making a forecast whether volley emission is possible. Numerical simulation results for “Kolchuginskaya” coal mine presented. Impurity concentration diagrams in outflow corresponding to the real full-scale data obtained. Safely operation time mine workings like a wastewater treatment facility are estimated. The carried out calculations demonstrate that the method of industrial wastewater treatment in flooded waste mine workings can be put into practice but it is very important to observe all the processes going on to avoid volley emission of accumulated impurities.

Bio-Remediation of Acid Mine Drainage in the Sarcheshmeh Porphyry Copper Mine by Fungi: Batch and Fixed Bed Process

Directory of Open Access Journals (Sweden)

Hanieh Soleimanifar

2012-12-01

Full Text Available Acid mine drainage (AMD containing high concentrations of iron and sulphate, low pH and variableconcentrations of heavy metals leads to many environmental problems. The concentrations of Cu and Mnare high in the AMD of the Sarcheshmeh porphyry copper mine, Kerman province, south of Iran. In thisstudy, the bio-remediation of Cu and Mn ions from acid mine drainage was investigated using two nativefungi called Aspergillus niger and Phanerochaete chrysosporium which were extracted from the soil andsediment samples of the Shour River at the Sarcheshmeh mine. The live fungi was first harvested andthen killed by boiling in 0.5 N NaOH solution. The biomass was finally dried at 60 C for 24 h andpowdered. The optimum biosorption parameters including pH, temperature, the amount of biosorbent andcontact time were determined in a batch system. The optimum pH varied between 5 and 6. It was foundthat the biosorption process increased with an increase in temperature and the amount of biosorbent.Biosorption data were attempted by Langmuir and Freundlich isotherm models and showed a good match.Kinetic studies were also carried out in the present study. The results show that the second-order kineticsmodel fits well the experimental data. The biosorption experiments were further investigated with acontinuous system to compare the biosorption capacities of two systems. The results show thatbiosorption process using a continuous system increases efficiency up to 99%. A desorption process waseventually performed in order to recover Copper and Manganese ions. This process was successful andfungi could be used again.

Mining planing introduction

International Nuclear Information System (INIS)

Toledo, R.D.

1985-01-01

Basic concepts concerning mining parameters, plan establishment and typical procedure methods applied throughout the physical execution of mining operations are here determined, analyzed and discussed. Technological and economic aspects of the exploration phase are presented as well as general mathematical and statistical methods for estimating, analyzing and representing mineral deposits which are virtually essential for good mining project execution. The characterization of important mineral substances and the basic parameters of mining works are emphasized in conjunction with long, medium and short term mining planning. Finally, geological modelling, ore reserves calculations and final economic evaluations are considered using a hypothetical example in order to consolidate the main elaborated ideas. (D.J.M.) [pt

African mining '91

International Nuclear Information System (INIS)

1991-01-01

The second 'African Mining' conference was held in June 1991, and followed the first event held in May 1987. That full four-year period was characterized by substantial changes in the political and economic climate of many countries in both hemispheres. The results of many of these changing facets of our industry are described in the papers in African Mining'91. Many of the papers deal with advances in technology, which is the main reason for the meeting. There are 37 papers under the headings general, mining, metallurgy and geology and exploration. Most papers are concerned with gold, copper and mineral mining. One paper concerning uranium mining operations in Namibia is indexed separately. (author)

The remediation of abandoned workings of a mining area in Ningxiang uranium mine

International Nuclear Information System (INIS)

Liu Yaochi; Zhou Xinghuo; Liu Bing

2004-01-01

The typical mining under buildings and river was used in a mining area of Ningxiang uranium mine. After the mining ended, 32.1% of the 2.68 m 3 abandoned workings did not fill because of limitation of the cut-and-fill mining method at that time. To remedy this, the mine used new filling methods. After the remedial action, the filling coefficient of pits reached 100%, and that of tunnels reached 86%. It can be proved by the monitoring data that the subsiding of surface has been effectively controlled at the abandoned workings

An FMM-FFT Accelerated SIE Simulator for Analyzing EM Wave Propagation in Mine Environments Loaded with Conductors

KAUST Repository

Yucel, Abdulkadir C.

2018-02-05

A fast and memory efficient 3D full wave simulator for analyzing electromagnetic (EM) wave propagation in electrically large and realistic mine tunnels/galleries loaded with conductors is proposed. The simulator relies on Muller and combined field surface integral equations (SIEs) to account for scattering from mine walls and conductors, respectively. During the iterative solution of the system of SIEs, the simulator uses a fast multipole method - fast Fourier transform (FMM-FFT) scheme to reduce CPU and memory requirements. The memory requirement is further reduced by compressing large data structures via singular value and Tucker decompositions. The efficiency, accuracy, and real-world applicability of the simulator are demonstrated through characterization of EM wave propagation in electrically large mine tunnels/galleries loaded with conducting cables and mine carts.

Low-Power and Reliable Communications for UWB-Based Wireless Monitoring Sensor Networks in Underground Mine Tunnels

OpenAIRE

Abou El-Nasr, Mohamad; Shaban, Heba

2015-01-01

This paper investigates the bit-error-rate (BER) and maximum allowable data throughput (MADTh) performance of a novel low-power mismatched Rake receiver structure for ultra wideband (UWB) wireless monitoring sensor networks in underground mine tunnels. This receive node structure provides a promising solution for low-power and reliable communications in underground mine tunnels with more than 90% reduction in power consumption. The BER and MADTh of the proposed receive nodes are investigated ...

The levels of disclosure relating to mine closure obligations by platinum mining companies

Directory of Open Access Journals (Sweden)

Joline Sturdy

2017-06-01

Aim: The aim of this study is to establish the extent to which platinum mines listed on the Johannesburg Stock Exchange (JSE comply with a recommended disclosure framework. Setting: South Africa is the largest producer of platinum in the world. The study covers all platinum mines listed on the JSE. Methods: Using a framework, a census of the annual financial statements, integrated annual reports and sustainability reports or websites was conducted to determine the level of compliance of disclosure relating to mine closure obligations to the recommended disclosure framework. Results: The results show disclosure relating to mine closure obligations of platinum mines listed on the JSE is inconsistent and not sufficient for stakeholders to understand the scope, key assumptions, parameters or reliability of the assessment and calculation of mine closure obligations. Conclusion: The assumptions used to determine mine closure obligations are specialised and multi-disciplinary. The accuracy and reliability of mine closure obligations will improve dramatically through greater transparency and access to information. It is recommended that the JSE listings for mining companies should require a competent person’s report to provide disclosure on assumptions, key values and processes applied to determine the mine closure obligations. Furthermore, it is recommended that the Department of Mineral Resources implements a mechanism of independent assessment of mine closure obligations by experts on an ongoing basis.

Solution of environmental protection problems and complex utilization of raw materials during mining and processing of uranium ores

International Nuclear Information System (INIS)

Litvinenko, V.G.; Savva, P.P.

1993-01-01

Consideration is given to the complex of measures taken in Priargunsky industrial mine-chemical association and directed to environment protection, complex utilization of raw materials during mining and processing of uranium ores. These measures include: 1) reduction of toxic chemical agent effluents into atmosphere due to introduction of new methods and gas cleaning systems; 2) rational use of water resources owing to application of circulating water supply systems, waste waters treatment and effective control of the state of water consumption by industrial enterprises; 3) utilization of gangue and industrial solid wastes

Economics of mine water treatment

OpenAIRE

Dvořáček, Jaroslav; Vidlář, Jiří; Štěrba, Jiří; Heviánková, Silvie; Vaněk, Michal; Barták, Pavel

2012-01-01

Mine water poses a significant problem in lignite coal mining. The drainage of mine water is the fundamental prerequisite of mining operations. Under the legislation of the Czech Republic, mine water that discharges into surface watercourse is subject to the permission of the state administration body in the water management sector. The permission also stipulates the limits for mine water pollution. Therefore, mine water has to be purified prior to discharge. Although all...

Mine waste management

International Nuclear Information System (INIS)

Hutchinson, I.P.G.; Ellison, R.D.

1992-01-01

This book reports on mine waste management. Topics covered include: Performance review of modern mine waste management units; Mine waste management requirements; Prediction of acid generation potential; Attenuation of chemical constituents; Climatic considerations; Liner system design; Closure requirements; Heap leaching; Ground water monitoring; and Economic impact evaluation

CTL Industries simplifies mining processes : fill containment system a simple solution for backfilling stopes

Energy Technology Data Exchange (ETDEWEB)

Larmour, A.

2010-12-01

Several large mining companies are interested in a patent-pending fill containment system designed to replace shotcrete fences after a stope has been filled. The existing process is extremely labour and material intensive. This article discussed how the new system has made work easier, safer and increased the bottom line. The article described the design and specifications of the shotcrete containment system. The advantages of the system include no wait time for customers for shotcrete teams to build fences, and it is a quick, easy process that takes about 3 hours to set up, inflate and fill. The article also outlined a shaft guide electronic profiling mechanism that had been developed to complement the shaft guide laminating device. The product electronically measures shaft guides in mine shafts to determine how much wear has occurred on the timber. Last, the article described a refuge station door sealant kit with a cabinet that contains items required to seal the refuge station door should an emergency occur. This quick and easy system replaces the previous method in which clay slugs are soaked in a five-gallon pail of water and applied by hand. 1 ref., 1 fig.

New Zealand mining legislation and recommendations for change following the Pike River disaster

International Nuclear Information System (INIS)

King, Tony

2012-01-01

There is good evidence that existing health and safety legislation in New Zealand (NZ) has produced a marked and sustained improvement in occupational health and in high-frequency low-consequence accidents.The same cannot be said for high-consequence low-frequency events. Changes to the regulatory framework should focus on these high- consequence low-frequency events although not to the detriment of low- consequence event safety. The (NZ) underground coal mining industry is characterised by a very small number of operating mines that are distinctly different from each other. This is also true of proposed mines, where there is even more variety in the type of firms proposing to operate these mines. The risks that each individual mine faces are varied and risks that predominate in one operation (for example methane or spontaneous combustion) may be entirely absent at another nearby operation. Research strongly suggests that the best regulatory approach for underground coal mines in NZ is process-based standards, supported by performance standards to identify issues and set appropriate performance outcomes. A well-resourced locally based inspectorate comprising knowledgeable and experienced inspectors with NZ mining experience is required, supported by access to overseas expertise. The Health and Safety in Employment Act 1992 should remain the governing legislation for NZ coal mining. The existing mining-specific regulations should be replaced for underground coal mining with a new set of regulations. These new regulations should draw heavily on the Queensland regulations with the best aspects of New South Wales and elsewhere also included. The internationalisation of management, advisors and workers supports an approach based on good overseas practice, rather than a highly- individualised, uniquely NZ solution. Learnings and recommendations from the Pike River Royal Commission should be incorporated into performance standards and outcomes in the new regulations.

Post-mining in France

International Nuclear Information System (INIS)

2007-01-01

This plentifully illustrated book aims at showing how new equilibria are building up during the transition between mining activity and post-mining, and at stressing on the necessity to keep up the cultural elements, the competencies and knowledge of mining works. The first chapter - mine and men - shows the importance of mineral substances in the objects of the everyday life, illustrates the importance of the mining tradition in France and describes the technical and administrative organisation of the end of the mining activity (works, rehabilitation, regulation, monitoring..). Chapter two - exploitation methods - presents the surface and underground facilities and their impact on the environment (extraction machines, workshops, ore processing plants, decantation ponds..). The third chapter deals with the rehabilitation and monitoring aspects: impact of mining activity stoppage on underground and surface waters, land stability, soils cleansing.. The last chapter summarizes the history of French mining region by region: Nord-Pas-de-Calais, Lorraine-Alsace, Massif central, Bretagne-Normandie, Provence-Alpes-Cote d'Azur and Pyrenees

Treating mine water

Energy Technology Data Exchange (ETDEWEB)

Matlak, E S; Kochegarova, L V; Zaslavskaya, I Yu

1980-10-01

Taking into account the negative influence of mine waters with suspended matter on the natural environment on the surface, the maximum treatment of mine water underground, is proposed. It is noted that full treatment of mine water, using conventional filtration methods, would be rather expensive, but a limited treatment of mine water is possible. Such treated mine water can be used in dust suppression and fire fighting systems. Mine water treated underground should be free of any odor, with pH level ranging from 6 to 9.5, with suspended matter content not exceeding 50 mg/l and coli-titre not less than 300 cm$SUP$3. It is suggested that water treatment to produce water characterized by these parameters is possible and economical. Recommendations on construction of underground sedimentation tanks and channels, and a hydraulic system of cleaning sedimentation tanks are proposed. The settling would be stored underground in abandoned workings. (2 refs.) (In Russian)

Solutions Network Formulation Report. Landsat Data Continuity Mission Simulated Data Products for Bureau of Land Management and Environmental Protection Agency Abandoned Mine Lands Decision Support

Science.gov (United States)

Estep, Leland

2007-01-01

Presently, the BLM (Bureau of Land Management) has identified a multitude of abandoned mine sites in primarily Western states for cleanup. These sites are prioritized and appropriate cleanup has been called in to reclaim the sites. The task is great in needing considerable amounts of agency resources. For instance, in Colorado alone there exists an estimated 23,000 abandoned mines. The problem is not limited to Colorado or to the United States. Cooperation for reclamation is sought at local, state, and federal agency level to aid in identification, inventory, and cleanup efforts. Dangers posed by abandoned mines are recognized widely and will tend to increase with time because some of these areas are increasingly used for recreation and, in some cases, have been or are in the process of development. In some cases, mines are often vandalized once they are closed. The perpetrators leave them open, so others can then access the mines without realizing the danger posed. Abandoned mine workings often fill with water or oxygen-deficient air and dangerous gases following mining. If the workings are accidentally entered into, water or bad air can prove fatal to those underground. Moreover, mine residue drainage negatively impacts the local watershed ecology. Some of the major hazards that might be monitored by higher-resolution satellites include acid mine drainage, clogged streams, impoundments, slides, piles, embankments, hazardous equipment or facilities, surface burning, smoke from underground fires, and mine openings.

Geochemistry of Standard Mine Waters, Gunnison County, Colorado, July 2009

Science.gov (United States)

Verplanck, Philip L.; Manning, Andrew H.; Graves, Jeffrey T.; McCleskey, R. Blaine; Todorov, Todor I.; Lamothe, Paul J.

2009-01-01

In many hard-rock-mining districts water flowing from abandoned mine adits is a primary source of metals to receiving streams. Understanding the generation of adit discharge is an important step in developing remediation plans. In 2006, the U.S. Environmental Protection Agency listed the Standard Mine in the Elk Creek drainage basin near Crested Butte, Colorado as a superfund site because drainage from the Standard Mine enters Elk Creek, contributing dissolved and suspended loads of zinc, cadmium, copper, and other metals to the stream. Elk Creek flows into Coal Creek, which is a source of drinking water for the town of Crested Butte. In 2006 and 2007, the U.S. Geological Survey undertook a hydrogeologic investigation of the Standard Mine and vicinity and identified areas of the underground workings for additional work. Mine drainage, underground-water samples, and selected spring water samples were collected in July 2009 for analysis of inorganic solutes as part of a follow-up study. Water analyses are reported for mine-effluent samples from Levels 1 and 5 of the Standard Mine, underground samples from Levels 2 and 3 of the Standard Mine, two spring samples, and an Elk Creek sample. Reported analyses include field measurements (pH, specific conductance, water temperature, dissolved oxygen, and redox potential), major constituents and trace elements, and oxygen and hydrogen isotopic determinations. Overall, water samples collected in 2009 at the same sites as were collected in 2006 have similar chemical compositions. Similar to 2006, water in Level 3 did not flow out the portal but was observed to flow into open workings to lower parts of the mine. Many dissolved constituent concentrations, including calcium, magnesium, sulfate, manganese, zinc, and cadmium, in Level 3 waters substantially are lower than in Level 1 effluent. Concentrations of these dissolved constituents in water samples collected from Level 2 approach or exceed concentrations of Level 1 effluent

Industrial Internet of Things: (IIoT) applications in underground coal mines.

Science.gov (United States)

Zhou, C; Damiano, N; Whisner, B; Reyes, M

2017-12-01

The Industrial Internet of Things (IIoT), a concept that combines sensor networks and control systems, has been employed in several industries to improve productivity and safety. U.S. National Institute for Occupational Safety and Health (NIOSH) researchers are investigating IIoT applications to identify the challenges of and potential solutions for transferring IIoT from other industries to the mining industry. Specifically, NIOSH has reviewed existing sensors and communications network systems used in U.S. underground coal mines to determine whether they are capable of supporting IIoT systems. The results show that about 40 percent of the installed post-accident communication systems as of 2014 require minimal or no modification to support IIoT applications. NIOSH researchers also developed an IIoT monitoring and control prototype system using low-cost microcontroller Wi-Fi boards to detect a door opening on a refuge alternative, activate fans located inside the Pittsburgh Experimental Mine and actuate an alarm beacon on the surface. The results of this feasibility study can be used to explore IIoT applications in underground coal mines based on existing communication and tracking infrastructure.

MONITORING METAL POLLUTION LEVELS IN MINE WASTES AROUND A COAL MINE SITE USING GIS

Directory of Open Access Journals (Sweden)

D. Sanliyuksel Yucel

2017-11-01

Full Text Available In this case study, metal pollution levels in mine wastes at a coal mine site in Etili coal mine (Can coal basin, NW Turkey are evaluated using geographical information system (GIS tools. Etili coal mine was operated since the 1980s as an open pit. Acid mine drainage is the main environmental problem around the coal mine. The main environmental contamination source is mine wastes stored around the mine site. Mine wastes were dumped over an extensive area along the riverbeds, and are now abandoned. Mine waste samples were homogenously taken at 10 locations within the sampling area of 102.33 ha. The paste pH and electrical conductivity values of mine wastes ranged from 2.87 to 4.17 and 432 to 2430 μS/cm, respectively. Maximum Al, Fe, Mn, Pb, Zn and Ni concentrations of wastes were measured as 109300, 70600, 309.86, 115.2, 38 and 5.3 mg/kg, respectively. The Al, Fe and Pb concentrations of mine wastes are higher than world surface rock average values. The geochemical analysis results from the study area were presented in the form of maps. The GIS based environmental database will serve as a reference study for our future work.

Monitoring Metal Pollution Levels in Mine Wastes around a Coal Mine Site Using GIS

Science.gov (United States)

Sanliyuksel Yucel, D.; Yucel, M. A.; Ileri, B.

2017-11-01

In this case study, metal pollution levels in mine wastes at a coal mine site in Etili coal mine (Can coal basin, NW Turkey) are evaluated using geographical information system (GIS) tools. Etili coal mine was operated since the 1980s as an open pit. Acid mine drainage is the main environmental problem around the coal mine. The main environmental contamination source is mine wastes stored around the mine site. Mine wastes were dumped over an extensive area along the riverbeds, and are now abandoned. Mine waste samples were homogenously taken at 10 locations within the sampling area of 102.33 ha. The paste pH and electrical conductivity values of mine wastes ranged from 2.87 to 4.17 and 432 to 2430 μS/cm, respectively. Maximum Al, Fe, Mn, Pb, Zn and Ni concentrations of wastes were measured as 109300, 70600, 309.86, 115.2, 38 and 5.3 mg/kg, respectively. The Al, Fe and Pb concentrations of mine wastes are higher than world surface rock average values. The geochemical analysis results from the study area were presented in the form of maps. The GIS based environmental database will serve as a reference study for our future work.

Preparation of ore blocks for mine leaching by reagent explosion injection

Science.gov (United States)

Shevchenko, YuS

2017-02-01

The current drilling-and-blasting operations fail to prepare intact ore body underlying a production horizon for subsequent mining and leaching. It is found that the required preparation quality is possible by means of advanced implementation of ore body discontinuity and filling of the resultant system of joints with active leaching solutions.

Reformulating the calculation of mining privileges for medium and large mining

Directory of Open Access Journals (Sweden)

Pedro Franco Concha

2016-01-01

Full Text Available Throughout this paper those technical and accounting concepts of the Law of mining privileges that generate ambiguity and incongruity for businesses has been analyzed and identified. For this reason, we have developed a proposal amending the calculation of mining privileges based on two main aspects: (i terminology used in the law and (ii establishment of income before retribution to stakholders and taxes as a basis for calculating privileges. As a result, it was established as an object of study for all mining companies paying privileges; however, for purposes of the investigation three representative mining companies of medium and large mining were selected. Later interviews were arranged with financial and tax managers of the companies mentioned above as well as experts in the field of mining privileges; it was concluded that the concepts of "cost" and "corresponding fiscal year" mentioned in the Law generated ambiguities, inconsistencies and accounting distortions. Also, mining companies and experts agreed that the current basis for the calculation of the privileges is not adequate for the mining sector since it does not reflect the financial situation of companies. Therefore, a proposal for reformulation of the applied priviously and a new basis for calculating the mining privileges based on the cost of sales is made; since, in the cost of sales is found what Kieso and Weygandt (1999 denominated as "the price paid for the right to seek and find a hidden Natural resources, or paid by a source already discovered"

Underground coal mine air quality in mines using disposable diesel exhaust filter control devices

Energy Technology Data Exchange (ETDEWEB)

Carlson, D.H.; Johnson, J.H.; Bagley, S.T.; Gratz, L.D. [Michigan Technological University, Houghton, MI (United States). Dept. of Mining Engineering

1996-07-01

As part of a collaborative study with the US Bureau of Mines, in-mine studies have been conducted to assess the effects of a low temperature disposable diesel exhaust filter. The mines have been designed as mines R and S in US Bureau of Mines publications. Each mine operated three to four Jeffrey 4110 ramcar haulage vehicles in the test section. The ramcars were equipped with MWM D916-6 diesel engines, rated at 74.6 kW (100 hp), and were operated for 3 days with the disposal diesel exhaust filter and 2 days without in both mines. Average diesel particulate matter control efficiencies, as measured by samplers located on the coal haulage vehicle, were 80% in mine R and 76% in mine S. Diesel particulate matter average control efficiencies, as measured in the diesel engine tailpipe, were 52% for mine R (for two ramcar vehicles) and 86% for mine S (for four ramcar vehicles). The air quality index control efficiencies, as measured by samplers located on the coal haulage vehicle were 48% in mine R and 51% in mine S. The exhaust quality index control efficiencies from tailpipe measurements were 45% for mine R and 63% for mine S. As measured by a high volume sampler in mine S, diesel particulate matter and associated organics and mutagenic activity were reduced approximately 50% with the use of the disposal diesel exhaust filter. Similar results were found with modified personal samplers in mine R. Little effect was found on relative removal of semivolatile organics. The disposal diesel exhaust filter resulted in about a 50% reduction in the most volatile polynuclear hydrocarbons; however, there appeared to be little effect on the less volatile polynuclear hydrocarbons. The disposable diesel exhaust filter appears to be very effective in reducing the levels of all the diesel exhaust particulate components, while having minor effects on the relative breakdown of the individual components of the particulate. 30 refs., 13 figs., 4 tabs.

Remediation of the closed-down uranium mine in Sweden

International Nuclear Information System (INIS)

Linder, P.; Sundblad, B.

1993-01-01

During the 1960s uranium was extracted from alum shale deposits at Ranstad in the south of Sweden. This mine was part of the development of a Swedish nuclear power program based on the heavy-water/natural uranium concept. In this report the history of Swedish uranium production is briefly presented as well as the reason for the closing-down of the mine at Ranstad. In 1985 the planning of the restoration of the area started. The aim of the remediation work was to find a permanent solution that excluded the need for any maintenance in the future. The procedures and techniques for remedial action are described for the open pit mine and the mill tailing deposits. As the leachate from the mill tailings was collected and purified, there was no urgent need for action. Investigations could be made to find an effective way for reducing the weathering of the pyrite in the tailings and the authorities concerned could accept the remediation plan after a detailed review. The main part of the plan has now been implemented and many experiences from the performance technique and the significant quality assurance program have been obtained. The old open pit mine has already been transformed into a lake and the mill tailings are covered by a leaktight barrier and a protective layer. The natural environment in the whole area has been reestablished

Technogenic waterflows generated by oil shale mining: impact on Purtse catchment rivers

International Nuclear Information System (INIS)

Raetsep, A.; Liblik, V.

2000-01-01

The correlation between natural (meteorological, hydrological) and technogenic (mining-technological, hydrogeological, hydrochemical) factors caused by oil shale mining in the Purtse catchment region in northeastern Estonia during 1990-1998 has been studied. As a result of a complex effect of these factors (correlation coefficients r = 0. 60-0.86), a so-called hydrogeological circulation of water has been formed in the catchment area. It totals 25-40 % from the whole amount of mine water pumped out at the present, but in the near future it will reach even up to 50-55 %. On the ground of average data, a conceptual balance scheme of water circulation (cycles) for the Purtse catchment landscape has been worked out. It shows that under the influence of technogenic waterflows a new, anthropogenic biogeochemical matter cycling from geological environment into hydrological one has been formed in this catchment area. Transition of the macro- and microelements existing in the composition of oil shale into the aqueous solution and their distribution in mine water are in a good harmony with the so-called arrangement of the elements by the electrode potentials. The technogenic hydrochemical conditions arising in the catchment rivers will not disappear even after finishing oil shale mining. (author)

Psychological aspects of accident prevention in mines

Energy Technology Data Exchange (ETDEWEB)

Lukestikova, M

1981-04-01

This paper duscusses ways of preventing work accidents and increasing work safety in underground black coal mines. Specific conditions of underground operations in coal mines are stressed. Elements of work accident prevention are analyzed: reducing hazards by introducing safer technology, automation and mechanization of operations associated with hazards, introducing special measures within the framework of safety engineering. Dependence of accident rate on such factors as personnel training, age, motivation, qualifications, and labor discipline is discussed. Investigations indicate that miner motivation plays a significant role in accident prevention. A high degree of labor motivation successfully reduces accident rate and a low degree of motivation increases accident rate. Role of labor collective in labor motivation as well as a correct system of wage incentives are evaluated. Methods of personnel training aimed at reducing accident rate are described. Role of a technique by which a group of miners attempts to find a solution to a work safety problem by amassing all ideas spontaneously contributed by participants is stressed.

Colombian mining legislation

International Nuclear Information System (INIS)

Mendoza Delgado, Eva Isolina

2004-01-01

The paper makes a historical recount of the mining legislation in Colombia, it is about the more relevant aspects of the Code of Mines, like they are the title miner, obligations, economic aspects, integration of mining areas and of the benefits contemplated in the law 685 of 2001

Partnership in mining

Energy Technology Data Exchange (ETDEWEB)

Haslam, R

1988-04-01

This paper discusses the benefits resulting from mutual cooperation and information exchange between the UK and USA coal industries. The aim of this cooperation is to promote safe and efficient extraction and profitable use of coal. Advanced mining technologies and mechanisation of the coal mines are some of the results of research cooperation between British Coal and the US Bureau of Mines. In addition, Britain has studied and put into good use the management styles, working practices and pay structure, and mining engineering adopted in the USA.

Radioecological challenges for mining

Energy Technology Data Exchange (ETDEWEB)

Vesterbacka, P.; Ikaeheimonen, T.K.; Solatie, D. [Radiation and Nuclear Safety Authority (Finland)

2014-07-01

In Finland, mining became popular in the mid-1990's when the mining amendments to the law made the mining activities easier for foreign companies. Also the price of the minerals rose and mining in Finland became economically profitable. Expanding mining industry brought new challenges to radiation safety aspect since radioactive substances occur in nearly all minerals. In Finnish soil and bedrock the average crystal abundance of uranium and thorium are 2.8 ppm and 10 ppm, respectively. It cannot be predicted beforehand how radionuclides behave in the mining processes which why they need to be taken into account in mining activities. Radiation and Nuclear Safety Authority (STUK) has given a national guide ST 12.1 based on the Finnish Radiation Act. The guide sets the limits for radiation doses to the public also from mining activities. In general, no measures to limit the radiation exposure are needed, if the dose from the operation liable to cause exposure to natural radiation is no greater than 0.1 mSv per year above the natural background radiation dose. If the exposure of the public may be higher than 0.1 mSv per year, the responsible party must provide STUK a plan describing the measures by which the radiation exposure is to be kept as low as is reasonably achievable. In that case the mining company responsible company has to make a radiological baseline study. The baseline study must focus on the environment that the mining activities may impact. The study describes the occurrence of natural radioactivity in the environment before any mining activities are started. The baseline study lasts usually for two to three years in natural circumstances. Based on the baseline study measurements, detailed information of the existing levels of radioactivity in the environment can be attained. Once the mining activities begin, it is important that the limits are set for the wastewater discharges to the environment and environmental surveillance in the vicinity of

Structural change of the mining components supplying industry, and innovative employment and qualification policies. A special study prepared on behalf of IKS. Final report

International Nuclear Information System (INIS)

Weber, B.

1992-01-01

The potentials and deficiencies of the mining components supplying industry are assessed by means of an industry study. Development prospects are derived for the mining sector. While individual solutions are neglected, methods which support the mining companies' efforts at diversifying and at opening up new markets are discussed placing emphasis on a sociocompatible implementation of the inevitable structural change and on the maintenance of a qualified industrial basis in communities dominated by the mining components supplying industry. The possibilities of cooperation between the companies are discussed, and conceivable future prospects are derived for the mining sector. (HS) [de

Formation of iron oxides from acid mine drainage and magnetic separation of the heavy metals adsorbed iron oxides

Energy Technology Data Exchange (ETDEWEB)

Kwon, Hee Won; Kim, Jeong Jin; Kim, Young Hun [Andong National University, Andong (Korea, Republic of); Ha, Dong Woo [Korea Electrotechnology Research Institute, Changwon (Korea, Republic of)

2016-03-15

There are a few thousand abandoned metal mines in South Korea. The abandoned mines cause several environmental problems including releasing acid mine drainage (AMD), which contain a very high acidity and heavy metal ions such as Fe, Cu, Cd, Pb, and As. Iron oxides can be formed from the AMD by increasing the solution pH and inducing precipitation. Current study focused on the formation of iron oxide in an AMD and used the oxide for adsorption of heavy metals. The heavy metal adsorbed iron oxide was separated with a superconducting magnet. The duration of iron oxide formation affected on the type of mineral and the degree of magnetization. The removal rate of heavy metal by the adsorption process with the formed iron oxide was highly dependent on the type of iron oxide and the solution pH. A high gradient magnetic separation (HGMS) system successfully separated the iron oxide and harmful heavy metals.

Research and Development of a New Silica-Alumina Based Cementitious Material Largely Using Coal Refuse for Mine Backfill, Mine Sealing and Waste Disposal Stabilization

Energy Technology Data Exchange (ETDEWEB)

Henghu Sun; Yuan Yao

2012-06-29

Coal refuse and coal combustion byproducts as industrial solid waste stockpiles have become great threats to the environment. To activate coal refuse is one practical solution to recycle this huge amount of solid waste as substitute for Ordinary Portland Cement (OPC). The central goal of this project is to investigate and develop a new silica-alumina based cementitious material largely using coal refuse as a constituent that will be ideal for durable construction, mine backfill, mine sealing and waste disposal stabilization applications. This new material is an environment-friendly alternative to Ordinary Portland Cement. The main constituents of the new material are coal refuse and other coal wastes including coal sludge and coal combustion products (CCPs). Compared with conventional cement production, successful development of this new technology could potentially save energy and reduce greenhouse gas emissions, recycle vast amount of coal wastes, and significantly reduce production cost. A systematic research has been conducted to seek for an optimal solution for enhancing pozzolanic reactivity of the relatively inert solid waste-coal refuse in order to improve the utilization efficiency and economic benefit as a construction and building material.

Modeling of Energy-saving System of Conditioning Mine Air for Shallow Underground Mines

Science.gov (United States)

Nikolaev, Alexandr; Miftakhov, Timur; Nikolaeva, Evgeniya

2017-11-01

Mines of Verkhnekamsk potassium-magnesium salt deposit in Perm Krai can be subsumed under shallow mines (depth less than 500 meters). At the present moment in shallow underground mines the are problem of condensate formation in large quantities, when ventilation warm seasons of the year. This problem is more actual for salt mine, where during contact between water and potassium-magnesium ore produced electrolyte, which give rise wear of equipment. For prevent/quantity reduction condensate formation in mine used system of conditioning (refrigerating and dehumidifying) mine air (ACS). However, application this system is limited by reason of tremendous costs of electric energy for their work.

Sustainable Remediation of Legacy Mine Drainage: A Case Study of the Flight 93 National Memorial

Science.gov (United States)

Emili, Lisa A.; Pizarchik, Joseph; Mahan, Carolyn G.

2016-03-01

Pollution from mining activities is a global environmental concern, not limited to areas of current resource extraction, but including a broader geographic area of historic (legacy) and abandoned mines. The pollution of surface waters from acid mine drainage is a persistent problem and requires a holistic and sustainable approach to addressing the spatial and temporal complexity of mining-specific problems. In this paper, we focus on the environmental, socio-economic, and legal challenges associated with the concurrent activities to remediate a coal mine site and to develop a national memorial following a catastrophic event. We provide a conceptual construct of a socio-ecological system defined at several spatial, temporal, and organizational scales and a critical synthesis of the technical and social learning processes necessary to achieving sustainable environmental remediation. Our case study is an example of a multi-disciplinary management approach, whereby collaborative interaction of stakeholders, the emergence of functional linkages for information exchange, and mediation led to scientifically informed decision making, creative management solutions, and ultimately environmental policy change.

The South African mining industry

International Nuclear Information System (INIS)

Langton, G.

1982-01-01

This paper covers six of the many mining and associated developments in South Africa. These are: (1) Deep level gold mining at Western Deep Levels Limited - (2) Palabora Mining Company Limited - SA's unique copper mine - (3) Production of steel and vanadium-rich slag at Highveld Steel and Vanadium Corporation - (4) Coal mining at Kriel and Kleinkopje Collieries - (5) A mass mining system for use below the Gabbro Sill at Premier Diamond Mine - (6) Uranium production - joint metallurgical scheme- Orange Free State Gold Mines. - For publication in this journal the original paper has been summarised. Should any reader wish to have the full text in English he should write to the author at the address below. (orig.) [de

Extracting software static defect models using data mining

Directory of Open Access Journals (Sweden)

Ahmed H. Yousef

2015-03-01

Full Text Available Large software projects are subject to quality risks of having defective modules that will cause failures during the software execution. Several software repositories contain source code of large projects that are composed of many modules. These software repositories include data for the software metrics of these modules and the defective state of each module. In this paper, a data mining approach is used to show the attributes that predict the defective state of software modules. Software solution architecture is proposed to convert the extracted knowledge into data mining models that can be integrated with the current software project metrics and bugs data in order to enhance the prediction. The results show better prediction capabilities when all the algorithms are combined using weighted votes. When only one individual algorithm is used, Naïve Bayes algorithm has the best results, then the Neural Network and the Decision Trees algorithms.

Mountaintop mining consequences

Science.gov (United States)

M.A. Palmer; E.S. Bernhardt; W.H. Schlesinger; K.N. Eshleman; E. Foufoula-Georgiou; M.S. Hendryx; A.D. Lemly; G.E. Likens; O.L. Loucks; M.E. Power; P.S. White; P.R. Wilcock

2010-01-01

There has been a global, 30-year increase in surface mining (1), which is now the dominant driver of land-use change in the central Appalachian ecoregion of the United States (2). One major form of such mining, mountaintop mining with valley fills (MTM/VF) (3), is widespread throughout eastern Kentucky, West Virginia (WV), and southwestern Virginia. Upper elevation...

Improving safety in mining

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-08-15

AcuMine is a spin-out company from CRC Mining Australia and the University of Sydney's Australian Centre for Field Robotics (ACFR). Its focus is to provide safety and fatigue management in mining environments. The AcuLine Haul Check system was its first development. Of greater benefit to safety in mines will be the AcuMine Proximity System (APPS) developed to reliably detect and warn drivers when in proximity to other trucks and utility vehicles and to detect personnel near to those heavy vehicles. 6 figs.

Remote control of safety and technological mining processes in underground coal mines

Energy Technology Data Exchange (ETDEWEB)

Marjanovic, D. (Elektronska Industrija RO IRI OOUR Razvoj, Nis (Yugoslavia))

1989-02-01

Discusses importance of data relevant to remote monitoring of production and safety at work in underground coal mines. The EI PS 2000 multi-purpose system developed by Elektronska Industrija, Nis, for use with AP-X1 and AP-X2 microcomputers in Serbian mines is described. Component parts include the CUM-8 central unit, the CIP-8 communication interface processor, the SNM-64 disjunction unit, the NM-64 energy supply unit and the CRT alarm monitor. This system is designed to warn of mine fires, methane and coal dust explosions, to help in evacuating mine crews, to control production processes and mine management and other functions. 8 refs

The mine planning process for an open-pit diamond mining operation - a case study on Letseng diamond mine in Lesotho

OpenAIRE

Madowe, A.

2013-01-01

This paper discusses the mine planning process for Letseng diamond mine in the Kingdom of Lesotho, in conjunction with the various software packages used during the process. The major pillars of the long-term mine planning process at Letseng are pit optimization followed by pit design and scheduling. Letseng uses Gemcom Whittle and GEMS for pit optimization and design and Runge XPAC for scheduling. The output of the mine planning process results in the generation of published mineral reserves...

Advanced mercury removal from gold leachate solutions prior to gold and silver extraction: a field study from an active gold mine in Peru.

Science.gov (United States)

Matlock, Matthew M; Howerton, Brock S; Van Aelstyn, Mike A; Nordstrom, Fredrik L; Atwood, David A

2002-04-01

Mercury contamination in the Gold-Cyanide Process (GCP) is a serious health and environmental problem. Following the heap leaching of gold and silver ores with NaCN solutions, portions of the mercury-cyano complexes often adhere to the activated carbon (AC) used to extract the gold. During the electrowinning and retorting steps, mercury can be (and often is) emitted to the air as a vapor. This poses a severe health hazard to plant workers and the local environment. Additional concerns relate to the safety of workers when handling the mercury-laden AC. Currently, mercury treatment from the heap leach solution is nonexistent. This is due to the fact that chelating ligands which can effectively work under the adverse pH conditions (as present in the heap leachate solutions) do not exist. In an effort to economically and effectively treat the leachate solution prior to passing over the AC, a dipotassium salt of 1,3-benzenediamidoethanethiol (BDET2-) has been developed to irreversibly bind and precipitate the mercury. The ligand has proven to be highly effective by selectively reducing mercury levels from average initial concentrations of 34.5 ppm (parts per million) to 0.014 ppm within 10 min and to 0.008 ppm within 15 min. X-ray powder diffraction (XRD), proton nuclear magnetic resonance (1H NMR), Raman, and infrared (IR) spectroscopy demonstrate the formation of a mercury-ligand compound, which remains insoluble over pH ranges of 0.0-14.0. Leachate samples from an active gold mine in Peru have been analyzed using cold vapor atomic fluorescence (CVAF) and inductively coupled plasma optical emission spectroscopy (ICP-OES) for metal concentrations before and after treatment with the BDET2- ligand.

Legacies of the uranium ore mining industry and their restoration. A survey of Africa, Asia and Australia

International Nuclear Information System (INIS)

Waggitt, P.

2008-01-01

Management of the environment in the uranium mining industry has an eventful history of more than 50 years. In addition to examples of successful restoration of mining and preparation sites in some countries there are also numerous cases, in which no or defective restoration left behind serious waste deposits. In the course of the renaissance of the uranium industry there is increasing interest in the rehabilitation of such waste sites. There is still an urgent requirement to eradicate the environmental effects of the old mining industry. Previous deposits could be of interest for renewed working under the present economic boundary conditions. Restoration as an integral part of the current and future uranium mining industry with the application of modern international safety standards is extremely important. The contribution provides a survey of restoration projects of the old mining industry in various parts of the world and shows how the International Atomic Energy Agency, the national supervisory and approval authorities as well as the mining companies collaborate closely at many sites on solution of the difficult problems. (orig.)

A Review of Mine Rescue Ensembles for Underground Coal Mining in the United States.

Science.gov (United States)

Kilinc, F Selcen; Monaghan, William D; Powell, Jeffrey B

The mining industry is among the top ten industries nationwide with high occupational injury and fatality rates, and mine rescue response may be considered one of the most hazardous activities in mining operations. In the aftermath of an underground mine fire, explosion or water inundation, specially equipped and trained teams have been sent underground to fight fires, rescue entrapped miners, test atmospheric conditions, investigate the causes of the disaster, or recover the dead. Special personal protective ensembles are used by the team members to improve the protection of rescuers against the hazards of mine rescue and recovery. Personal protective ensembles used by mine rescue teams consist of helmet, cap lamp, hood, gloves, protective clothing, boots, kneepads, facemask, breathing apparatus, belt, and suspenders. While improved technology such as wireless warning and communication systems, lifeline pulleys, and lighted vests have been developed for mine rescuers over the last 100 years, recent research in this area of personal protective ensembles has been minimal due to the trending of reduced exposure of rescue workers. In recent years, the exposure of mine rescue teams to hazardous situations has been changing. However, it is vital that members of the teams have the capability and proper protection to immediately respond to a wide range of hazardous situations. Currently, there are no minimum requirements, best practice documents, or nationally recognized consensus standards for protective clothing used by mine rescue teams in the United States (U.S.). The following review provides a summary of potential issues that can be addressed by rescue teams and industry to improve potential exposures to rescue team members should a disaster situation occur. However, the continued trending in the mining industry toward non-exposure to potential hazards for rescue workers should continue to be the primary goal. To assist in continuing this trend, the mining industry

Atmospheric particulate matter size distribution and concentration in West Virginia coal mining and non-mining areas.

Science.gov (United States)

Kurth, Laura M; McCawley, Michael; Hendryx, Michael; Lusk, Stephanie

2014-07-01

People who live in Appalachian areas where coal mining is prominent have increased health problems compared with people in non-mining areas of Appalachia. Coal mines and related mining activities result in the production of atmospheric particulate matter (PM) that is associated with human health effects. There is a gap in research regarding particle size concentration and distribution to determine respiratory dose around coal mining and non-mining areas. Mass- and number-based size distributions were determined with an Aerodynamic Particle Size and Scanning Mobility Particle Sizer to calculate lung deposition around mining and non-mining areas of West Virginia. Particle number concentrations and deposited lung dose were significantly greater around mining areas compared with non-mining areas, demonstrating elevated risks to humans. The greater dose was correlated with elevated disease rates in the West Virginia mining areas. Number concentrations in the mining areas were comparable to a previously documented urban area where number concentration was associated with respiratory and cardiovascular disease.

Arsenic mineralogy and mobility in the arsenic-rich historical mine waste dump

International Nuclear Information System (INIS)

Filippi, Michal; Drahota, Petr; Machovič, Vladimír; Böhmová, Vlasta; Mihaljevič, Martin

2015-01-01

A more than 250 year-old mine dump was studied to document the products of long-term arsenopyrite oxidation under natural conditions in a coarse-grained mine waste dump and to evaluate the environmental hazards associated with this material. Using complementary mineralogical and chemical approaches (SEM/EDS/WDS, XRD, micro-Raman spectroscopy, pore water analysis, chemical extraction techniques and thermodynamic PHREEQC-2 modeling), we documented the mineralogical/geochemical characteristics of the dumped arsenopyrite-rich material and environmental stability of the newly formed secondary minerals. A distinct mineralogical zonation was found (listed based on the distance from the decomposed arsenopyrite): scorodite (locally associated with native sulfur pseudomorphs) plus amorphous ferric arsenate (AFA/pitticite), kaňkite, As-bearing ferric (hydr)oxides and jarosite. Ferric arsenates and ferric (hydr)oxides were found to dissolve and again precipitate from downward migrating As-rich solutions cementing rock fragments. Acidic pore water (pH 3.8) has elevated concentrations of As with an average value of about 2.9 mg L −1 . Aqueous As is highly correlated with pH (R 2 = 0.97, p < 0.001) indicating that incongruent dissolution of ferric arsenates controls dissolved As well as the pH of the percolating waste solution. Arsenic released from the dissolution of ferric arsenates into the pore water is, however, trapped by latter and lower-down precipitating jarosite and especially ferric (hydr)oxides. The efficiency of As sequestration by ferric (hydr)oxides in the waste dump and underlying soil has been found to be very effective, suggesting limited environmental impact of the mine waste dump on the surrounding soil ecosystems. - Highlights: • More than 250 year-old arsenopyrite-rich mine waste dump was studied. • Mineral transformation and the environmental stability of different secondary arsenic mineral phases were assessed. • High efficiency of As

Mitigation of social and environmental impacts resulting from final closure of uranium mines

International Nuclear Information System (INIS)

Cipriani, Moacir

2002-11-01

This thesis focus on the impact of uranium mines in Brazil. It is recent, in the order of the Brazilian mining, the concern with the impact of mining activities. The Federal Constitution of 1988 compels the miner to rehabilitate the degraded environment, in accordance with the technical solution demanded by the competent public agency, which makes use of a system of environmental norms conditioning the mining activity. However, the concern with the closure of mines is in an early stage, for whose achievement the public power still lacks of norms and regulations. The closure of the first uranium mining in Brazil assumes special meaning, because the possible environmental problems related to uranium mines are considered to be serious and the uranium industry is state owned. This thesis is divided in two sections. The first one describes the state of the art of the uranium industry and the rules and management practices regarding the final closure of uranium mining in Brazil and countries like Australia, Canada, USA and France, that have been selected on the basis of the following criteria: production, exportation, control of reserves and final consumption of uranium. In the second part, a case study of Pocos de Caldas mine is presented, with description of historical production, plant waste and the chemical treatment of the ore. This part also presents the research carried out since the beginning of the operations aiming to remedial actions, including the dismantling of surface structures, tailings reclamation, and ground-water restoration, following CNEN (Brazilian Nuclear Energy Commission) rules, as well as a survey of local press coverage of the impact of the industry. A final recommendation is made regarding a management model and strategies to mitigate social and environmental impacts resulting from final closure of the CIPC. (author)

Environmental problems caused by bituminous schist and possible solutions

International Nuclear Information System (INIS)

Elmas, N.; Aykul, H.; Erarslan, K.; Ediz, I.G.

1998-01-01

Schist, as a disposal of mine, has harmful effects on environment. however, several manners can be utilized to prevent the environmental destruction as well as an economical benefit is gained. In this study, environmental problems caused by bituminous schist and other disposals have been investigated on a specific lignite coal mine where schist is disposed as waste material. Pollution and damage on land and in water sources around the coal district and the villages have been observed, recorded and several solutions to environmental problems have been proposed. Discussed proposals will not only solve the environmental pollution problem but also provide waste management facility. Industrial structure of the district enables such a disposal to be used as an economical raw material. Besides, general effects of the coal mine and the power plant nearby have been discussed from environmental point of view, too. 7 refs

OCHRE PRECIPITATES AND ACID MINE DRAINAGE IN A MINE ENVIRONMENT

Directory of Open Access Journals (Sweden)

BRANISLAV MÁŠA

2012-03-01

Full Text Available This paper is focused to characterize the ochre precipitates and the mine water effluents of some old mine adits and settling pits after mining of polymetallic ores in Slovakia. It was shown that the mine water effluents from two different types of deposits (adits; settling pits have similar composition and represent slightly acidic sulphate water (pH in range 5.60-6.05, sulphate concentration from 1160 to 1905 g.dm-3. The ochreous precipitates were characterized by methods of X-ray diffraction analysis (XRD, scanning electron microscopy (SEM and B.E.T. method for measuring the specific surface area and porosity. The dominant phases were ferrihydrite with goethite or goethite with lepidocrocide.

Recovery of iron oxides from acid mine drainage and their application as adsorbent or catalyst.

Science.gov (United States)

Flores, Rubia Gomes; Andersen, Silvia Layara Floriani; Maia, Leonardo Kenji Komay; José, Humberto Jorge; Moreira, Regina de Fatima Peralta Muniz

2012-11-30

Iron oxide particles recovered from acid mine drainage represent a potential low-cost feedstock to replace reagent-grade chemicals in the production of goethite, ferrihydrite or magnetite with relatively high purity. Also, the properties of iron oxides recovered from acid mine drainage mean that they can be exploited as catalysts and/or adsorbents to remove azo dyes from aqueous solutions. The main aim of this study was to recover iron oxides with relatively high purity from acid mine drainage to act as a catalyst in the oxidation of dye through a Fenton-like mechanism or as an adsorbent to remove dyes from an aqueous solution. Iron oxides (goethite) were recovered from acid mine drainage through a sequential precipitation method. Thermal treatment at temperatures higher than 300 °C produces hematite through a decrease in the BET area and an increase in the point of zero charge. In the absence of hydrogen peroxide, the solids adsorbed the textile dye Procion Red H-E7B according to the Langmuir model, and the maximum amount adsorbed decreased as the temperature of the thermal treatment increased. The decomposition kinetics of hydrogen peroxide is dependent on the H(2)O(2) concentration and iron oxides dosage, but the second-order rate constant normalized to the BET surface area is similar to that for different iron oxides tested in this and others studies. These results indicate that acid mine drainage could be used as a source material for the production of iron oxide catalysts/adsorbents, with comparable quality to those produced using analytical-grade reagents. Copyright © 2012 Elsevier Ltd. All rights reserved.

Data mining in radiology

International Nuclear Information System (INIS)

Kharat, Amit T; Singh, Amarjit; Kulkarni, Vilas M; Shah, Digish

2014-01-01

Data mining facilitates the study of radiology data in various dimensions. It converts large patient image and text datasets into useful information that helps in improving patient care and provides informative reports. Data mining technology analyzes data within the Radiology Information System and Hospital Information System using specialized software which assesses relationships and agreement in available information. By using similar data analysis tools, radiologists can make informed decisions and predict the future outcome of a particular imaging finding. Data, information and knowledge are the components of data mining. Classes, Clusters, Associations, Sequential patterns, Classification, Prediction and Decision tree are the various types of data mining. Data mining has the potential to make delivery of health care affordable and ensure that the best imaging practices are followed. It is a tool for academic research. Data mining is considered to be ethically neutral, however concerns regarding privacy and legality exists which need to be addressed to ensure success of data mining

Problems of radiation safety at mined out uranium properties in Uzbekistan

International Nuclear Information System (INIS)

Gorlov, I.G.; Goldshtein, R.I.

2002-01-01

Republic of Uzbekistan was one of the main uranium production areas in former Soviet Union for more than 40 years. About 150 uranium production facilities have been constructed for that time in connection with hydrothermal and sedimentary-metamorphic deposits of the fold basement and stratal-infiltration deposits of the sedimentary cover. 18 of these facilities are located in Tadzhikistan and Kyrgyzstan along the boundary with Uzbekistan. Exploration and operation activities in the deposits located in the fold basement were in general in form of mining. It was resulted in essential violation of landscape, development of various underground excavations, damps, tailing impoundments, lower grade stockpiles. All these need large volume of radioactive decontamination and restoration activities. 54 sites from 67 (80%) located in the territory of Uzbekistan need radioactive decontamination and restoration now. Very serious radiation settings have occurred in some of these sites nowadays. Radioactive dumps of Cherkesar-I and Cherkesar-II mined out uranium deposits are out of any control in Fergana valley in Pap region of Namangan province. The radioactive materials are collected in dumps covered with neutral ground. The cover is washed out in some places by rains. Intensity of gamma radiation is 300 to 450 μr/h, radon exhalation is up to 7 Bk/m 2 *sec (while the normal level is up to 1 Bk/m 2 *sec). Water runs out from mothballed mines and its microelement composition is close to the composition of the technological solution. The water contains a number of very toxic elements (beryllium, manganese, iron, and aluminum). Water concentration of radionuclides is uranium - 23.4 Bk/1 (the normal level is 9.6), radon - 1433 (80), radium - 15.9 (0.94). The same set of the toxicants has been found in bottom sediment of a stream, its total alpha-activity reaches 35 to 81 KBk/kg. The spring water runs to a small valley and then to a village where the water is used for cattle

Problems of evaluating isotope analysis of concentrated salt solutions in potash mines

International Nuclear Information System (INIS)

Schmiedl, H.D.

1980-01-01

Three problems of quantitative evaluation of analytic D and 18 O isotope data of concentrated salt solutions are discussed: (1) Consideration of the influence of admixtures of hydrated salts in determining meteoric or marine water fractions in a concentrated salt solution, (2) analytic accuracy and detection limits in determining meteoric water in salt solutions, and (3) processes of isotopic exchange with reservoir rock and sample matrix

Lunabotics Mining Competition: Inspiration through Accomplishment

Science.gov (United States)

Mueller, Robert P.

2012-01-01

Space Mining for resources such as water ice, and regolith, which contain many elements in the form of metals, minerals, volatiles and other compounds, is a necessary step in Space Resource Utilization. One of the primary goals is to extract propellants from the regolith such as oxygen and hydrogen which could then be used for in-space transportation. In addition, the space mining system can be used for various construction tasks that can benefit human and robotic exploration as well as scientific investigations based on the exposed topography. The National Aeronautics & Space Administration (NASA) Lunabotics Mining Competition is a university-level competition designed to engage and retain students in science, technology, engineering and mathematics (STEM). NASA will directly benefit from the competition by encouraging the development of innovative lunar excavation concepts from universities which may result in clever ideas and solutions which could be applied to an actual lunar excavation device or payload. The challenge is for students to design and build a remote controlled or autonomous excavator, called a lunabot, that can collect and deposit a minimum of 10 kilograms of lunar simulant within 15 minutes. The complexities of the challenge include the abrasive characteristics of the lunar simulant, the weight and size limitations of the lunabot, and the ability to control the lunabot from a remote control center or operate autonomously. This paper will present an update of the results and lessons learned during the first and second annual Lunabotics Mining Competitions held in May 2010 and May 2011. It will also preview the 2012 competition with a review of the revised rules. In 2010,22 United States (US) universities competed, and in May 2011 the competition was opened to international participation. In 2011, 36 teams actually competed from 26 USA states and 4 foreign countries (India, Bangladesh, Colombia and Canada). This combined total directly inspired an

Restoration of intact ground waters and surface waters in the post-mining landscape; Wiederherstellung intakter Grund- und Oberflaechengewaesser nach dem Braunkohlenbergbau

Energy Technology Data Exchange (ETDEWEB)

Merkel, Broder; Schipek, Mandy [Technische Univ. Bergakademie Freiberg (Germany); Scholz, Guenter; Rabe, Wolfgang; Clauss, Denny [MOVAB-D GmbH, Lauta (Germany)

2011-12-15

The restoration of the territories of former brown coal mining increasingly requires special efforts for the protection of affected ground waters and surface waters. With newly developed methods (the so-called inlake technology), recently various solutions to neutralize acidic mining lakes could be created. Simultaneously, this improves the water quality of adjacent aquifers at reasonable financial cost.

Coal mine site reclamation

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-02-15

Coal mine sites can have significant effects on local environments. In addition to the physical disruption of land forms and ecosystems, mining can also leave behind a legacy of secondary detrimental effects due to leaching of acid and trace elements from discarded materials. This report looks at the remediation of both deep mine and opencast mine sites, covering reclamation methods, back-filling issues, drainage and restoration. Examples of national variations in the applicable legislation and in the definition of rehabilitation are compared. Ultimately, mine site rehabilitation should return sites to conditions where land forms, soils, hydrology, and flora and fauna are self-sustaining and compatible with surrounding land uses. Case studies are given to show what can be achieved and how some landscapes can actually be improved as a result of mining activity.

Swedish mines. Underground exploitation methods

International Nuclear Information System (INIS)

Paucard, A.

1960-01-01

Between 1949 and 1957, 10 engineers of the Mining research and exploitation department of the CEA visited 17 Swedish mines during 5 field trips. This paper presents a compilation of the information gathered during these field trips concerning the different underground mining techniques used in Swedish iron mines: mining with backfilling (Central Sweden and Boliden mines); mining without backfilling (mines of the polar circle area). The following techniques are described successively: pillar drawing and backfilled slices (Ammeberg, Falun, Garpenberg, Boliden group), sub-level pillar drawing (Grangesberg, Bloettberget, Haeksberg), empty room and sub-level pillar drawing (Bodas, Haksberg, Stripa, Bastkarn), storage chamber pillar drawing (Bodas, Haeksberg, Bastkarn), and pillar drawing by block caving (ldkerberget). Reprint of a paper published in Revue de l'Industrie Minerale, vol. 41, no. 12, 1959 [fr

A full-scale porous reactive wall for prevention of acid mine drainage

International Nuclear Information System (INIS)

Benner, S.G.; Blowes, D.W.; Ptacek, C.J.

1997-01-01

The generation and release of acidic drainage containing high concentrations of dissolved metals from decommissioned mine wastes is an environmental problem of international scale. A potential solution to many acid drainage problems is the installation of permeable reactive walls into aquifers affected by drainage water derived from mine waste materials. A permeable reactive wall installed into an aquifer impacted by low-quality mine drainage waters was installed in August 1995 at the Nickel Rim mine site near Sudbury, Ontario. The reactive mixture, containing organic matter, was designed to promote bacterially mediated sulfate reduction and subsequent metal sulfide precipitation. The reactive wall is installed to an average depth of 12 feet (3.6 m) and is 49 feet (15 m) long perpendicular to ground water flow. The wall thickness (flow path length) is 13 feet (4 m). Initial results, collected nine months after installation, indicate that sulfate reduction and metal sulfide precipitation is occurring. The reactive wall has effectively removed the capacity of the ground water to generate acidity on discharge to the surface. Calculations based on comparison to previously run laboratory column experiments indicate that the reactive wall has potential to remain effective for at least 15 years

Sustainable mining management

International Nuclear Information System (INIS)

Tejera Oliver, J. L.

2009-01-01

Mining activities are carried out by the older man and have provided resources, since ancient times, for their development and progress. With the discovery of fire will show the first metals that have marked the civilizations of copper, bronze and iron, and is the prehistory of the Stone Age tools that man has made from the exploitation of quarries first. The industrial revolution of the nineteenth century is linked to coal and steel, and could not conceiver of todays society without oil and gas, without silicon and coltan. But the mines are often aggressive and, despite their need and what they contribute to the development are answered by the societies where are made. during recent years there has been growing international efforts to try to make the minimum requirements of sustainable exploitation (European Directives, GMI, GRI, etc.) In AENOR, and within the Technical Committee of Standardization 22 Mining and Explosives, chaired by AITEMIN, was established the subcommittee 3, chaired by IGME, where, with the participation of all stake holders, have developed some standards on sustainable mining management sustainable mining that will be a tool available to mining companies to demonstrate their sustainable use to Society. (Author)

Power generation from lignite coal in Bulgaria - problems and solutions

International Nuclear Information System (INIS)

Batov, S.; Gadjanov, P.; Panchev, T.

1997-01-01

The bulk of lignite coal produced in Bulgaria is used as fuel for the thermal power plants (TPP) built in Maritsa East coal field. A small part of it goes to production of briquettes and to fuel the auxiliary power plants of industrial enterprises. The total installed capacity of the power plants in the region of Maritsa East is 2490 MW, and the electric power generated by them is about 30% of the total power generated in the country. It should be noted that these power plants were subjected to a number of rehabilitations aiming to improve their technical and economic parameters. Irrespective of that, however, solution has still to be sought to a number of problems related to utilisation of the low-grade lignite coal for power generation. On the whole, they can be divided in the following groups: Those related to lignite coal mining can be referred to the first group. Lignite coal is mined in comparatively complicated mining and geological conditions characterized mainly by earth creep and deformation. The second group of problems is related to coal quality control. It is a fact of major significance that the quality indices of coal keep changing all the time in uneven steps without any definite laws to govern it. That creates hard problems in the process of coal transportation, crushing and combustion. The next group of problems concerns operation and upgrading of the power generation equipment. That applies especially to the existing boilers which bum low-grade fuel in order to improve their operation in terms of higher thermal efficiency, controllability, reliability, improved environmental indices, etc. An increasingly high importance is attached to environmental impact problems incident to lignite coal utilisation. Abatement of sulphur oxide emissions and dust pollution is a problem solution of which cannot wait. The possibilities for partial solution of the environmental problems through increasing the thermal efficiency of facilities at the thermal Power

Synthesis report about the after-mine mission; Rapport de synthese sur la mission apres-mine

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

The French ministry of economy finances and industry has assigned the mission of evaluating the after-mine management system to the general inspection of finances and the general council of mines. The after-mine management system encompasses all procedures of coal, iron and potash mines closing down, land reclamation and environmental remedial action and site rehabilitation. This document makes first a status of the problems generated by the stoppage of mining activities: technical aspects, costs, institutional, organisational and juridical aspects, conservation of competences, international benchmarking elements and good practices implemented in foreign countries. Then, in a second part, this report presents the recommendations of the after-mine mission about the mastery of after-mine costs in agreement with the respect of the technical and social goals, with the development of the after-mine institutional system with the scheduled disappearance of Charbonnages de France and Mines de Potasses d'Alsace companies, and with the conservation of competences in the framework of the post-mine operational structure proposed by the mission. (J.S.)

Synthesis report about the after-mine mission; Rapport de synthese sur la mission apres-mine

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

The French ministry of economy finances and industry has assigned the mission of evaluating the after-mine management system to the general inspection of finances and the general council of mines. The after-mine management system encompasses all procedures of coal, iron and potash mines closing down, land reclamation and environmental remedial action and site rehabilitation. This document makes first a status of the problems generated by the stoppage of mining activities: technical aspects, costs, institutional, organisational and juridical aspects, conservation of competences, international benchmarking elements and good practices implemented in foreign countries. Then, in a second part, this report presents the recommendations of the after-mine mission about the mastery of after-mine costs in agreement with the respect of the technical and social goals, with the development of the after-mine institutional system with the scheduled disappearance of Charbonnages de France and Mines de Potasses d'Alsace companies, and with the conservation of competences in the framework of the post-mine operational structure proposed by the mission. (J.S.)

Exploration and Mining Roadmap

Energy Technology Data Exchange (ETDEWEB)

none,

2002-09-01

This Exploration and Mining Technology Roadmap represents the third roadmap for the Mining Industry of the Future. It is based upon the results of the Exploration and Mining Roadmap Workshop held May 10 ñ 11, 2001.

Coal Mine Permit Boundaries

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — ESRI ArcView shapefile depicting New Mexico coal mines permitted under the Surface Mining Control and Reclamation Act of 1977 (SMCRA), by either the NM Mining these...

Mining technology and policy issues 1983

International Nuclear Information System (INIS)

Anon.

1983-01-01

This book presents conference papers on advances in mineral processing, coal mining, communications for mining executives, environmental laws and regulations, exploration philosophy, exploration technology, government controls and the environment, management, mine finance, minerals availability, mine safety, occupational health, open pit mining, the precious metals outlook, public lands, system improvements in processing ores, and underground mining. Topics considered include coal pipelines and saline water, an incentive program for coal mines, sandwich belt high-angle conveyors, the development of a mining company, regulations for radionuclides, contracts for western coal production for Pacific Rim exports, and the control of radon daughters in underground mines

Inductive learning as a fusion engine for mine detection

Energy Technology Data Exchange (ETDEWEB)

Kercel, S.W.; Dress, W.B.

1997-08-01

Semiotics is defined by some researchers as {open_quotes}the study of the appearance (visual or otherwise) meaning, and use of symbols and symbol systems.{close_quotes} Semiotic fusion of data from multiple sensory sources is a potential solution to the problem of landmine detection. This turns out to be significant, because notwithstanding the diversity of sensor technologies being used to attack the problem, there is no single effective landmine sensor technology. The only practical, general-purpose mine detector presently available is the trained dog. Most research into mine-detection technology seeds to emulate the dog`s seemingly uncanny abilities. An ideal data-fusion system would mimic animal reaction, with the brain`s perceptive power melding multiple sensory cues into an awareness of the size and location of a mine. Furthermore, the fusion process should be adaptive, with the skill at combining cues into awareness improving with experience. Electronic data-fusion systems reported in the countermine literature use conventional vector-based pattern recognition methods. Although neural nets are popular, they have never satisfactorily met the challenge. Despite years of investigation, nobody has ever found a vector space representation that reliably characterizes mine identity. This strongly suggests that the features have not been found because researchers have been looking for the wrong characteristics. It is worth considering that dogs probably do not represent data as mathematical number lists, but they almost certainly represent data via semiotic structures.

Water management at Roessing uranium mine, Namibia

International Nuclear Information System (INIS)

Smit, M.T.R.; Brent, C.P.

1991-01-01

Water Management at a large uranium mine and leaching plant located in a desert environment is described in respect of reducing water consumption and controlling and containing contaminants. The extent to which water consumption has been reduced by innovative measures to reduce water losses and increase water recycle is described. Although the recycling of untreated solutions generated in the process has had negative effects on plant throughput and recovery, the overall benefit has been significant. Measures employed to ensure that no contamination of local groundwater occurs are described. (author)

Exploration and mining - Report 800C. Predevelopment studies for mine methane management and utilization

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Since 1999 Japan and Australia have been engaged in a 5-year predevelopment study of mine methane management and utilization. The effort aims to develop a technique to recover and utilize the greenhouse gas that escapes during coal mining for a decrease in the environmental impact of coal mining and to develop a technique to simulate the behavior of gas during coal mining. Understanding gas behavior will be useful in formulating a plan for optimum mine methane management and utilization in a newly developed mining zone. Technology transfer and interchangeability were considered and the Hunter Valley, New South Wales, was chosen as the experiment site. Tasks to discharge in fiscal 2000 were (1) collection of data on resources, technology, and the trend of Government policy and regulations, (2) measurement of stress and gas permeability and the assessment of mechanical strength of rock and coal at specified spots in the mining zone, (3) 3-dimensional gasping of the Wambo coal mine geography from the standpoints of geology and civil engineering, grasping of gas characteristics, and modelling and (4) the development of gas and rock behavior grasping technology for use during coal mining. (NEDO)

Mine shaft fire and smoke protection systems - an update on hardware development and in-mine testing

International Nuclear Information System (INIS)

Johnson, G.A.

1982-01-01

In 1976, The Bureau of Mines developed a prototype system to sense and extinguish fires in shafts and shaft stations in underground metal and nonmetal mines. Subsequent work modified this technology to include fueling areas, spontaneous combustion zones and coal mines. This paper updates IC-8783 ''In-mine Fire Tests of Mine Shaft Fire and Smoke Protection Systems'', which was published in 1978 and summarized the design and in-mine, actual fire testing of the first prototype mine shaft fire and smoke protection system. This paper also updates related work from IC-8775 ''Spontaneous Oxidation and Combustion of Sulfide Ores in Underground Mines, (also published in 1978) and IC-8808 ''In-mine Evaluation of Underground Fire and Smoke Detectors'', (published in early 1979)

Section of Cybernetics in Mining of Mining Committee of Polish Academy of Sciences - Pro Memoria

Science.gov (United States)

Wojaczek, Antoni; Miśkiewicz, Kazimierz

2017-09-01

Section of Cybernetics in Mining of Mining Committee of Polish Academy of Science (PAN) has been created by PAN Mining Committee in 1969. It was a section in Mining Committee of PAN, whose operation range included widely understood issues of automation, telecommunication and informatics in mining industry. The main operation method of the Section was to organize the periodic conferences dedicated to issues of control systems in mining. The first conference took place in 1971 in Katowice. Together with new (the current one) term of office of Mining Committee of PAN this Section ceased to exist. The paper presents (pro memoria) over 40 year long conference output of this Section that functioned within the scope of operation of Mining Committee of PAN up to 12th January 2016.

Potential for mine water reuse in an abandoned coal mine in northern Spain

Energy Technology Data Exchange (ETDEWEB)

Marques, A.; Garcia-Ordiales, E.; Loredo, J. [Oviedo Univ., Asturias (Spain)

2010-07-01

This paper investigated the potential re-utilization of mine water in industrial activities. Mine water characterization studies were conducted to evaluate mine waters from the abandoned La Camocha Mine in northwestern Spain. Hydrochemical studies have indicated that the water is bicarbonated with a low sulphate and iron content, and a neutral pH. The concentrations of trace metals are below water legislation for human consumption levels. The water can economically be transported for use in the irrigation of a botanical garden and sports centre located in the same region as the mine. Use of the water will help to preserve rivers and other waterways in the region, and may also minimize the environmental impacts of pumping activities at the mine. Fluid properties for various water samples were provided. 6 refs., 1 tab., 3 figs.

Two-stage combined treatment of acid mine drainage and municipal wastewater.

Science.gov (United States)

Deng, Dongyang; Lin, Lian-Shin

2013-01-01

This study examined the feasibility of the combined treatment of field-collected acid mine drainages (AMD, pH = 4.2 ± 0.9, iron = 112 ± 118 mg/L, sulfate = 1,846 ± 594 mg/L) and municipal wastewater (MWW, avg. chemical oxygen demand (COD) = 234-333 mg/L) using a two-stage process. The process consisted of batch mixing of the two wastes to condition the mixture solutions, followed by anaerobic biological treatment. The mixings performed under a range of AMD/MWW ratios resulted in phosphate removal of 9 to ∼100%, the mixture pH of 6.2-7.9, and COD/sulfate concentration ratio of 0.05-5.4. The biological treatment consistently removed COD and sulfate by >80% from the mixture solutions for COD/sulfate ratios of 0.6-5.4. Alkalinity was produced in the biological treatment causing increased pH and further removal of metals from the solutions. Scanning electron microscopy of produced sludge with energy dispersion analysis suggested chemical precipitation and associated adsorption and co-precipitation as the mechanisms for metal removal (Fe: >99%, Al: ∼100%, Mn: 75 to ∼100%, Ca: 52-81%, Mg: 13-76%, and Na: 56-76%). The study showed promising results for the treatment method and denoted the potential of developing innovative technologies for combined management of the two wastes in mining regions.

AN OPERATIONAL MANAGEMENT MODEL FOR A COAL MINING PRODUCTION UNIT

Directory of Open Access Journals (Sweden)

R. Visser

2012-01-01

Full Text Available

ENGLISH ABSTRACT: The coal mining industry faces increased pressure for higher quality coal at lower cost and increased volumes. To satisfy these requirements the industry needs technically skilled first line supervisors with operational management skills. Most first line supervisors possess the necessary technical, but not the required operational management skills. Various operational management philosophies, describing world-class operational management practices exist; however, it is not possible to implement these philosophies as-is in a mining environment due to the various differences between manufacturing and mining. The solution is to provide an operational management model, adapted from these philosophies, to first line supervisors in the coal mining industry.

AFRIKAANSE OPSOMMING: Die steenkoolmynbedryf ervaar groeiende druk van die mark vir hoër gehalte steenkool, laer koste en verhoogde volumes. Om hierdie behoefte te bevredig benodig die myn tegniesgeskoolde eerstelyntoesighouers met bedryfsbestuursvaardighede. Ongelukkig beskik die meeste toesighouers wel oor die nodige tegniese kennis, maar nie die nodige bedryfsbestuursvaardighede nie. Daar bestaan verskeie bedryfsbestuursfilosofieë wat wêreldklas bedryfsbestuurspraktyke omskryf. Dit is egter nie moontlik om die filisofieë net so in die mynbedryf te implimenteer nie a.g.v. die verskille tussen vervaardiging en mynbou. Die oplossing is om ‘n bedryfsbestuurmodel wat op hierdie filosofieë geskoei is, aan eerstelyntoesighouers in die steenkoolbedryf te verskaf.

Uranium mining in Australia

International Nuclear Information System (INIS)

Anon.

1984-01-01

The mining of uranium in Australia is criticised in relation to it's environmental impact, economics and effects on mine workers and Aborigines. A brief report is given on each of the operating and proposed uranium mines in Australia

Spatio-Temporal Rule Mining

DEFF Research Database (Denmark)

Gidofalvi, Gyozo; Pedersen, Torben Bach

2005-01-01

Recent advances in communication and information technology, such as the increasing accuracy of GPS technology and the miniaturization of wireless communication devices pave the road for Location-Based Services (LBS). To achieve high quality for such services, spatio-temporal data mining techniques...... are needed. In this paper, we describe experiences with spatio-temporal rule mining in a Danish data mining company. First, a number of real world spatio-temporal data sets are described, leading to a taxonomy of spatio-temporal data. Second, the paper describes a general methodology that transforms...... the spatio-temporal rule mining task to the traditional market basket analysis task and applies it to the described data sets, enabling traditional association rule mining methods to discover spatio-temporal rules for LBS. Finally, unique issues in spatio-temporal rule mining are identified and discussed....

Methods and means for the in-house training of mining machine operators

Directory of Open Access Journals (Sweden)

Velikanov Vladimir

2017-01-01

Full Text Available This study investigates the quality issue of the in-house training process for mining machine operators. The authors prove the urgency of the designated problem. The changes in modern society, as well as the development of science and technology have a direct impact on the vocational education system. This paper describes the main aspects of the in-house training process of mining machine operators; define the essence, structure, contents, and main directions of its revitalization. The following solutions are proposed in order to improve the quality of the in-house training process: to use the original method based on a rating system of the operator knowledge evaluation, active and interactive forms of using modern training technologies. The authors conducted testing techniques in mining enterprises with the aim of confirming the adequacy of the suggested approaches. The results are given in the work. It was proposed that the methods and tools integration has a positive impact on professional training system.

A case-based reasoning tool for breast cancer knowledge management with data mining concepts and techniques

Science.gov (United States)

Demigha, Souâd.

2016-03-01

The paper presents a Case-Based Reasoning Tool for Breast Cancer Knowledge Management to improve breast cancer screening. To develop this tool, we combine both concepts and techniques of Case-Based Reasoning (CBR) and Data Mining (DM). Physicians and radiologists ground their diagnosis on their expertise (past experience) based on clinical cases. Case-Based Reasoning is the process of solving new problems based on the solutions of similar past problems and structured as cases. CBR is suitable for medical use. On the other hand, existing traditional hospital information systems (HIS), Radiological Information Systems (RIS) and Picture Archiving Information Systems (PACS) don't allow managing efficiently medical information because of its complexity and heterogeneity. Data Mining is the process of mining information from a data set and transform it into an understandable structure for further use. Combining CBR to Data Mining techniques will facilitate diagnosis and decision-making of medical experts.