WorldWideScience

Sample records for solid phys rev

  1. Comment on "Total Negative Refraction in Real Crystals for Ballistic Electrons and Light" (Phys. Rev. Lett. 91, 157404 (2003))

    OpenAIRE

    Yau, H. -F.; Liu, J. -P.; Ke, B.; Kuo, C. -H.; Ye, Z.

    2003-01-01

    Recently, Zhang et al. (Phys. Rev. Lett. 91, 157404 (2003)) have demonstrated that an amphoteric refraction, i. e. both positive and negative refraction, may prevail at the interface of two uniaxial anisotropic crystals when their optical axes are in different directions. The authors subsequently made a correspondence between such a refraction with the negative refraction expected for Left Handed Materials (LHMs). Here we comment that the amphoteric refraction can be observed even with one un...

  2. Comment on “Diffusion of n-type dopants in germanium” [Appl. Phys. Rev. 1, 011301 (2014)

    International Nuclear Information System (INIS)

    Cowern, N. E. B.; Simdyankin, S.; Goss, J. P.; Napolitani, E.; De Salvador, D.; Bruno, E.; Mirabella, S.; Ahn, C.; Bennett, N. S.

    2015-01-01

    The authors of the above paper call into question recent evidence on the properties of self-interstitials, I, in Ge [Cowern et al., Phys. Rev. Lett. 110, 155501 (2013)]. We show that this judgment stems from invalid model assumptions during analysis of data on B marker-layer diffusion during proton irradiation, and that a corrected analysis fully supports the reported evidence. As previously stated, I-mediated self-diffusion in Ge exhibits two distinct regimes of temperature, T: high-T, dominated by amorphous-like mono-interstitial clusters—i-morphs—with self-diffusion entropy ≈30 k, and low-T, where transport is dominated by simple self-interstitials. In a transitional range centered on 475 °C both mechanisms contribute. The experimental I migration energy of 1.84 ± 0.26 eV reported by the Münster group based on measurements of self-diffusion during irradiation at 550 °C < T < 680 °C further establishes our proposed i-morph mechanism

  3. Erratum: Creation of X-Ray Transparency of Matter by Stimulated Elastic Forward Scattering [Phys. Rev. Lett. 115 , 107402 (2015)

    Energy Technology Data Exchange (ETDEWEB)

    Stöhr, J.; Scherz, A.

    2016-01-06

    X-ray absorption by matter has long been described by the famous Beer-Lambert law. Here we show how this fundamental law needs to be modified for high-intensity coherent x-ray pulses, now available at x-ray free electron lasers, due to the onset of stimulated elastic forward scattering. We present an analytical expression for the modified polarization-dependent Beer-Lambert law for the case of resonant core-to-valence electronic transitions and incident transform limited x-ray pulses. Upon transmission through a solid, the absorption and dichroic contrasts are found to vanish with increasing x-ray intensity, with the stimulation threshold lowered by orders of magnitude through a super-radiative coherent effect. Our results have broad implications for the study of matter with x-ray lasers.

  4. Solid state theory. An introduction. 2. rev. and ext. ed.

    International Nuclear Information System (INIS)

    Roessler, Ulrich

    2009-01-01

    Solid-State Theory - An Introduction is a textbook for graduate students of physics and material sciences. It stands in the tradition of older textbooks on this subject but takes up new developments in theoretical concepts and materials which are connected with such path breaking discoveries as the Quantum-Hall Effects, the high-Tc superconductors, and the low-dimensional systems realized in solids. Thus besides providing the fundamental concepts to describe the physics of electrons and ions of which the solid consists, including their interactions and the interaction with light, the book casts a bridge to the experimental facts and opens the view into current research fields. (orig.)

  5. Universal Mechanism of Spin Relaxation in Solids

    Science.gov (United States)

    Chudnovsky, Eugene

    2006-03-01

    Conventional elastic theory ignores internal local twists and torques. Meantime, spin-lattice relaxation is inherently coupled with local elastic twists through conservation of the total angular momentum (spin + lattice). This coupling gives universal lower bound (free of fitting parameters) on the relaxation of the atomic or molecular spin in a solid [1] and on the relaxation of the electron spin in a quantum dot [2]. [1] E. M. Chudnovsky, D. A. Garanin, and R. Schilling, Phys. Rev. B 72, 094426 (2005). [2] C. Calero, E. M. Chudnovsky, and D. A. Garanin, Phys. Rev. Lett. 95, 166603 (2005).

  6. Retraction: On the origin of power-law distributions in systems with constrained phase space [Condens. Matter Phys., 2013, vol. 16, 43802

    Directory of Open Access Journals (Sweden)

    Editorial Board

    2014-03-01

    Full Text Available The article Condens. Matter Phys., 2013, vol. 16, 43802 ( DOI:10.5488/CMP.16.43802 has been retracted by the decision of the Editorial Board. There is a significant overlap with an article: Phys. Rev. E, 2006, vol. 74, 036120 ( DOI:10.1103/PhysRevE.74.036120. Appologies are offered to readers of the journal that this was not detected during the submission process.

  7. Partial and total electronic stopping cross sections of atoms and solids for protons

    International Nuclear Information System (INIS)

    Kaneko, Toshiaki.

    1990-12-01

    Based on a wave packet theory (Phys. Rev. A40, 2188(1989); Phys. Stat. Sol. (B)156,49(1989)), partial and total electronic cross sections of target elements in atomic and solid phases with atomic number Z ranging from 2 (He) to 92 (U) are tabulated shell by shell for protons with velocity v from 0.2V 0 to 2OV 0 (V 0 =2.18 x 10 8 cm/s). (author)

  8. Thermophysical Properties of Matter - the TPRC Data Series. Volume 13. Thermal Expansion - Nonmetallic Solids

    Science.gov (United States)

    1977-01-01

    topography of the state of knowledge on the thermal expansion of nonmetallic solids. We believe there is also much food for reflec- West Lafayette...34 Lithium Silicates ......... 713 209 Magnesium Metasilicate MgSiO. .. ......... 715 210 Magnesium Orthosilicate Mg2 SiO . . . . . . . . . . . . 718 211...Antiferromagnetism of Praseodymium," Phys. Rev. Letters, 12(20), 553-5, 1964. 66. Goode, J.M., "Phase Transition Temperature of Polonium ,"J. Chem. Phys., 26(5), 1269

  9. Assessment of the GLLB-SC potential for solid-state properties and attempts for improvement

    Science.gov (United States)

    Tran, Fabien; Ehsan, Sohaib; Blaha, Peter

    2018-02-01

    Based on the work of Gritsenko et al. (GLLB) [Phys. Rev. A 51, 1944 (1995), 10.1103/PhysRevA.51.1944], the method of Kuisma et al. [Phys. Rev. B 82, 115106 (2010), 10.1103/PhysRevB.82.115106] to calculate the band gap in solids was shown to be much more accurate than the common local density approximation (LDA) and generalized gradient approximation (GGA). The main feature of the GLLB-SC potential (SC stands for solid and correlation) is to lead to a nonzero derivative discontinuity that can be conveniently calculated and then added to the Kohn-Sham band gap for a comparison with the experimental band gap. In this work, a thorough comparison of GLLB-SC with other methods, e.g., the modified Becke-Johnson (mBJ) potential [Tran and Blaha, Phys. Rev. Lett. 102, 226401 (2009), 10.1103/PhysRevLett.102.226401], for electronic, magnetic, and density-related properties is presented. It is shown that for the band gap, GLLB-SC does not perform as well as mBJ for systems with a small band gap and strongly correlated systems, but is on average of similar accuracy as hybrid functionals. The results on itinerant metals indicate that GLLB-SC overestimates significantly the magnetic moment (much more than mBJ does), but leads to excellent results for the electric field gradient, for which mBJ is in general not recommended. In the aim of improving the results, variants of the GLLB-SC potential are also tested.

  10. Erratum: Renormalization of NN scattering: Contact potential [Phys. Rev. C 71, 034001 (2005)

    International Nuclear Information System (INIS)

    Yang Jifeng; Huang Jianhua

    2005-01-01

    In Eqs. (43) and (44), the factor (1+α 0 J 3 ) -(1/2) should be replaced by (1+α 2 J 3 ) -(1/2) . Similarly, in Eqs. (46) and (47), the factor (1+q 3 α 0 Mμ 3 ) -(1/2) should be replaced by (1+q 3 α 2 Mμ 3 ) -(1/2) . The results and conclusions of the article are not affected

  11. Formulation of strongly non-local, non-isothermal dynamics for heterogeneous solids based on the GENERIC with application to phase-field modeling

    NARCIS (Netherlands)

    Hütter, M.; Svendsen, B.

    2017-01-01

    The purpose of the current work is the formulation of models for conservative and non-conservative dynamics in solid systems with the help of the General Equation for the Non-Equilibrium Reversible-Irreversible Coupling (GENERIC: e.g., Grmela and Öttinger, Phys. Rev. E 56(6), 6620 (1997); Öttinger

  12. Administrative Circulars Rev.

    CERN Multimedia

    2003-01-01

    Administrative Circular N° 19 (Rev. 3) - April 2003 Subsistence indemnity - Other expenses necessarily incurred in the course of duty travelAdministrative Circular N° 25 (Rev. 2) - April 2003 Shift work - Special provisions for the Fire and Rescue Service - These circulars have been revised. Human Resources Division Tel. 74128Copies of these circulars are available in the Divisional Secretariats. In addition, administrative and operational circulars, as well as the lists of those in force, are available for consultation on the Web at: http://humanresources.web.cern.ch/humanresources/internal/admin_services/admincirc/listadmincirc.asp

  13. Dynamical coupling in Pb(Zr,Ti)O.sub.3./sub. solid solutions from first principles

    Czech Academy of Sciences Publication Activity Database

    Wang, D.; Weerasinghe, J.; Bellaiche, L.; Hlinka, Jiří

    2011-01-01

    Roč. 83, č. 2 (2011), "020301-1"-"020301-4" ISSN 1098-0121 R&D Projects: GA MŠk ME08109 Institutional research plan: CEZ:AV0Z10100520 Keywords : first-principles * ferroelectric * PZT Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.691, year: 2011 http://link.aps.org/doi/10.1103/PhysRevB.83.020301

  14. Solid State Research, 1980:4

    Science.gov (United States)

    1980-10-31

    Fetterman G. A. Koepf* P. F. Goldsmith6 B.J. Clifton D. Buhl* N. R. Eriekson" D.D. Peck N. McAvoy* P. F. Tannenwald Accepted by Science St40... Fetterman 22 **** -^m^m-i^jm^ -«%, j». ■*** REFERENCES 1. Solid State Research Report, Lincoln Laboratory, M.I.T. (1980:2), pp. 11-12. DTK? AD-A092724...17. M.G. Raymer, J. Mostowski, and J. L. Carlsten, Phys. Rev. A 19, 2304(1979). - 18. W. A.M. Blumberg, U.R. Fetterman , D.D. Peck, and P.F

  15. Material Trends ( From M.Imada, A. Fujimori, and Y. Tokura, Rev ...

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Material Trends ( From M.Imada, A. Fujimori, and Y. Tokura, Rev. Mod. Phys. 70, 1039 (1998) ). Differences due to changes in cation radius causing bending of Mn-O-Mn bonds. Extreme sensitivity to small changes.

  16. PhysLink Physics and Astronomy online education and reference

    CERN Document Server

    The PhysLink.com is a comprehensive physics and astronomy online education, research and reference web site. In addition to providing high-quality content, PhysLink.com is a meeting place for professionals, students and other curious minds.

  17. Publisher's Note: Branching ratio of the electromagnetic decay of the Σ+(1385) Phys. Rev. D 85, 052004 (2012)

    Science.gov (United States)

    Keller, D.; Hicks, K.; Adhikari, K. P.; Adikaram, D.; Amaryan, M. J.; Anghinolfi, M.; Baghdasaryan, H.; Ball, J.; Battaglieri, M.; Bedlinskiy, I.; Biselli, A. S.; Bookwalter, C.; Boiarinov, S.; Branford, D.; Briscoe, W. J.; Brooks, W. K.; Burkert, V. D.; Carman, D. S.; Celentano, A.; Chandavar, S.; Cole, P. L.; Contalbrigo, M.; Crede, V.; D'Angelo, A.; Daniel, A.; Dashyan, N.; De Vita, R.; De Sanctis, E.; Djalali, C.; Doughty, D.; Dupre, R.; El Alaoui, A.; El Fassi, L.; Elouadrhiri, L.; Eugenio, P.; Fedotov, G.; Gabrielyan, M. Y.; Gevorgyan, N.; Gilfoyle, G. P.; Giovanetti, K. L.; Gohn, W.; Golovatch, E.; Gothe, R. W.; Graham, L.; Griffioen, K. A.; Guidal, M.; Guler, N.; Guo, L.; Hafidi, K.; Hakobyan, H.; Holtrop, M.; Ilieva, Y.; Ireland, D. G.; Ishkhanov, B. S.; Isupov, E. L.; Jo, H. S.; Joo, K.; Khandaker, M.; Khetarpal, P.; Kim, A.; Kim, W.; Klein, F. J.; Kubarovsky, A.; Kubarovsky, V.; Kuleshov, S. V.; Lu, H. Y.; MacGregor, I. J. D.; Mao, Y.; Markov, N.; Mayer, M.; McKinnon, B.; Meyer, C. A.; Mineeva, T.; Mirazita, M.; Mokeev, V.; Moutarde, H.; Munevar, E.; Nadel-Turonski, P.; Nasseripour, R.; Niccolai, S.; Niculescu, G.; Niculescu, I.; Osipenko, M.; Ostrovidov, A. I.; Paolone, M.; Pappalardo, L.; Paremuzyan, R.; Park, K.; Park, S.; Pasyuk, E.; Anefalos Pereira, S.; Pisano, S.; Pogorelko, O.; Pozdniakov, S.; Procureur, S.; Prok, Y.; Protopopescu, D.; Raue, B. A.; Ricco, G.; Rimal, D.; Ripani, M.; Ritchie, B. G.; Rosner, G.; Rossi, P.; Sabatié, F.; Saini, M. S.; Salgado, C.; Schott, D.; Schumacher, R. A.; Seraydaryan, H.; Sharabian, Y. G.; Smith, E. S.; Smith, G. D.; Sober, D. I.; Sokhan, D.; Stepanyan, S. S.; Stepanyan, S.; Stoler, P.; Strauch, S.; Taiuti, M.; Tang, W.; Taylor, C. E.; Tkachenko, S.; Vernarsky, B.; Vineyard, M. F.; Vlassov, A. V.; Voskanyan, H.; Voutier, E.; Watts, D. P.; Wood, M. H.; Zachariou, N.; Zana, L.; Zhao, B.; Zhao, Z. W.

    2012-03-01

    The CLAS detector was used to obtain the first ever measurement of the electromagnetic decay of the $\\Sigma^{*+}(1385)$ from the reaction $\\gamma p \\to K^0 \\Sigma^{*+}(1385)$. A real photon beam with a maximum energy of 3.8 GeV was incident on a liquid-hydrogen target, resulting in the photoproduction of the kaon and $\\Sigma^*$ hyperon. Kinematic fitting was used to separate the reaction channel from the background processes. The fitting algorithm exploited a new method to kinematically fit neutrons in the CLAS detector, leading to the partial width measurement of $250.0\\pm56.9(stat)^{+34.3}_{-41.2}(sys)$ keV. A U-spin symmetry test using the SU(3) flavor-multiplet representation yields predictions for the $\\Sigma^{*+}(1385)\\to\\Sigma^{+}\\gamma$ and $\\Sigma^{*0}(1385)\\to\\Lambda\\gamma$ partial widths that agree with the experimental measurements.

  18. Preface: phys. stat. sol. (a) 202/12

    Science.gov (United States)

    Neumann, Wolfgang; Stutzmann, Martin; Hildebrandt, Stefan

    2005-09-01

    The present special issue contains a collection of Original Papers dedicated to Professor Johannes Heydenreich on the occasion of his 75th birthday.Johannes Heydenreich, born on 20 June 1930 in Plauen/Vogtland near Dresden, studied physics at the Pädagogische Hochschule Potsdam, where he obtained his first academic degree Dipl. Phys. in 1958. He received his doctoral degree at the Martin Luther University in Halle in 1961 and the Habilitation degree in 1969. Already during his studies in Potsdam, he showed an interest in electron microscopy due to the influence of his teacher and supervisor Prof. Picht, one of the pioneers in electron optics. His interests were strengthened when Johannes Heydenreich did the experimental work for his Diploma degree at the Institute for Experimental Physics of the University of Halle, where he met Prof. Heinz Bethge for the first time. This was the beginning of a fruitful and longstanding collaboration. In 1962 Johannes Heydenreich joined the team of the later Institute for Solid State Physics and Electron Microscopy of the Academy of Sciences of the GDR, in Halle, for which the basis was laid by Prof. Bethge in 1960.Heydenreich has been working as Assistant Director for many years and played a decisive role in introducing and organising the various techniques of electron microscopy in the institute.The research activities of Prof. Heydenreich covered a broad spectrum over the years. At the beginning of his career he made significant contributions in the field of electron mirror microscopy. After that, his main interests were focused on transmission electron microscopy, ranging from diffraction contrast analysis of crystal defects to high-resolution electron microscopy and image processing. His favourite field was studies of defect-induced phenomena in advanced materials. The so-called Bethge-Heydenreich, the book Electron Microscopy in Solid State Physics, published at first in a German edition in 1982 and later in a revised

  19. Exploring Physics with Computer Animation and PhysGL

    Science.gov (United States)

    Bensky, T. J.

    2016-10-01

    This book shows how the web-based PhysGL programming environment (http://physgl.org) can be used to teach and learn elementary mechanics (physics) using simple coding exercises. The book's theme is that the lessons encountered in such a course can be used to generate physics-based animations, providing students with compelling and self-made visuals to aid their learning. Topics presented are parallel to those found in a traditional physics text, making for straightforward integration into a typical lecture-based physics course. Users will appreciate the ease at which compelling OpenGL-based graphics and animations can be produced using PhysGL, as well as its clean, simple language constructs. The author argues that coding should be a standard part of lower-division STEM courses, and provides many anecdotal experiences and observations, that include observed benefits of the coding work.

  20. Scaling and universality of ac conduction in disordered solids

    DEFF Research Database (Denmark)

    Schrøder, Thomas; Dyre, Jeppe

    2000-01-01

    Recent scaling results for the ac conductivity of ionic glasses by Roling et al. [Phys. Rev. Lett. 78, 2160 (1997)] and Sidebottom [Phys. Rev. Lett. 82, 3653 (1999)] are discussed. We prove that Sidebottom's version of scaling is completely general. A new approximation to the universal ac conduct...... conductivity arising in the extreme disorder limit of the symmetric hopping model, the "diffusion cluster approximation," is presented and compared to computer simulations and experiments.......Recent scaling results for the ac conductivity of ionic glasses by Roling et al. [Phys. Rev. Lett. 78, 2160 (1997)] and Sidebottom [Phys. Rev. Lett. 82, 3653 (1999)] are discussed. We prove that Sidebottom's version of scaling is completely general. A new approximation to the universal ac...

  1. Treatment of solid wastes. Preventing waste production, recovery, waste collection, waste disposal, sanitation. Procedures, technical processes, legal foundations. 2. rev. ed. Behandlung fester Abfaelle. Vermeiden, Verwerten, Sammeln, Beseitigen, Sanieren. Verfahrensweise, technische Realisierung, rechtliche Grundlagen

    Energy Technology Data Exchange (ETDEWEB)

    Sattler, K.; Emberger, J.

    1990-01-01

    The book 'Treatment of Solid Wastes' was compiled by the group 'Environmental Protection/Waste Disposal' and looks at disposal methods and processes. The initial chapters deal with technical methods of environmental protection, describe laws and legal regulations pertaining to waste disposal, explain the quantities and composition of the waste matter and give an overview of the treatments which are available. Methods and technical process of waste collection, transport, sorting, recapturing of valuable matter, biochemical and thermal conversion and depositing. Treatment of poisonous wastes and old sites are dealt with in the final chapters. (orig./EF).

  2. Sapphire: A kinking nonlinear elastic solid

    Science.gov (United States)

    Basu, S.; Barsoum, M. W.; Kalidindi, S. R.

    2006-03-01

    Kinking nonlinear elastic (KNE) solids are a recently identified large class of solids that deform fully reversibly by the formation of dislocation-based kink bands [Barsoum et al. Phys. Rev. Lett. 92, 255508 (2004)]. We further conjectured that a high c/a ratio-that ensures that only basal slip is operative-is a sufficient condition for a solid to be KNE. The c/a ratio of sapphire is 2.73 and thus, if our conjecture is correct, it should be a KNE solid. Herein by repeatedly loading-up to 30 times-the same location of sapphire single crystals of two orientations-A and C-with a 1 μm radius spherical nanoindenter, followed by atomic force microscopy, we showed that sapphire is indeed a KNE solid. After pop-ins of the order of 100 nm, the repeated loadings give rise to fully reversible, reproducible hysteresis loops wherein the energy dissipated per unit volume per cycle Wd is of the order of 0.5 GJ/m3. Wd is due to the back and fro motion of the dislocations making up the incipient kink bands that are fully reversible. The results presented here strongly suggest that-like in graphite and mica-kink bands play a more critical role in the room temperature constrained deformation of sapphire than had hitherto been appreciated. Our interpretation is also in agreement with, and can explain most, recent nanoindentation results on sapphire.

  3. Optimized Chemical Probes for REV-ERBα

    OpenAIRE

    Trump, Ryan P.; Bresciani, Stefano; Cooper, Anthony W. J.; Tellam, James P.; Wojno, Justyna; Blaikley, John; Orband-Miller, Lisa A.; Kashatus, Jennifer A.; Dawson, Helen C.; Loudon, Andrew; Ray, David; Grant, Daniel; Farrow, Stuart N.; Willson, Timothy M.; Tomkinson, Nicholas C. O.

    2013-01-01

    REV-ERBα has emerged as an important target for regulation of circadian rhythm and its associated physiology. Herein, we report on the optimization of a series of REV-ERBα agonists based on GSK4112 (1) for potency, selectivity, and bioavailability. Potent REV-ERBα agonists 4, 10, 16, and 23 are detailed for their ability to suppress BMAL and IL-6 expression from human cells while also demonstrating excellent selectivity over LXRα. Amine 4 demonstrated in vivo bioavailability after either IV o...

  4. Publisher's Note: Search for ultrahigh energy neutrinos in highly inclined events at the Pierre Auger Observatory [Phys. Rev. D 84, 122005

    NARCIS (Netherlands)

    Abreu, P.; Aglietta, M.; Ahlers, M.; Ahn, E. J.; Albuquerque, I. F. M.; Allard, D.; Allekotte, I.; Allen, J.; Allison, P.; Almela, A.; Alvarez Castillo, J.; Alvarez-Muñiz, J.; Ambrosio, M.; Aminaei, A.; Anchordoqui, L.; Andringa, S.; Anticic, T.; Aramo, C.; Arganda, E.; Arqueros, F.; Asorey, H.; Assis, P.; Aublin, J.; Ave, M.; Avenier, M.; Avila, G.; Bäcker, T.; Badescu, A. M.; Balzer, M.; Barber, K. B.; Barbosa, A. F.; Bardenet, R.; Barroso, S. L. C.; Baughman, B.; Bäuml, J.; Beatty, J. J.; Becker, B. R.; Becker, K. H.; Bellétoile, A.; Bellido, J. A.; Benzvi, S.; Berat, C.; Bertou, X.; Biermann, P. L.; Billoir, P.; Blanco, F.; Blanco, M.; Bleve, C.; Blümer, H.; Bohácová, M.; Boncioli, D.; Bonifazi, C.; Bonino, R.; Borodai, N.; Brack, J.; Brancus, I.; Brogueira, P.; Brown, W. C.; Bruijn, R.; Buchholz, P.; Bueno, A.; Burton, R. E.; Caballero-Mora, K. S.; Caccianiga, B.; Caramete, L.; Caruso, R.; Castellina, A.; Catalano, O.; Cataldi, G.; Cazon, L.; Cester, R.; Chauvin, J.; Cheng, S. H.; Chiavassa, A.; Chinellato, J. A.; Chirinos Diaz, J.; Chudoba, J.; Clay, R. W.; Coluccia, M. R.; Conceição, R.; Contreras, F.; Cook, H.; Cooper, M. J.; Coppens, J.; Cordier, A.; Coutu, S.; Covault, C. E.; Creusot, A.; Criss, A.; Cronin, J.; Curutiu, A.; Dagoret-Campagne, S.; Dallier, R.; Dasso, S.; Daumiller, K.; Dawson, B. R.; de Almeida, R. M.; de Domenico, M.; de Donato, C.; de Jong, S. J.; de La Vega, G.; de Mello, W. J. M., Jr.; de Mello Neto, J. R. T.; de Mitri, I.; de Souza, V.; de Vries, K. D.; Del Peral, L.; Del Río, M.; Deligny, O.; Dembinski, H.; Dhital, N.; di Giulio, C.; Díaz Castro, M. L.; Diep, P. N.; Diogo, F.; Dobrigkeit, C.; Docters, W.; D'Olivo, J. C.; Dong, P. N.; Dorofeev, A.; Dos Anjos, J. C.; Dova, M. T.; D'Urso, D.; Dutan, I.; Ebr, J.; Engel, R.; Erdmann, M.; Escobar, C. O.; Espadanal, J.; Etchegoyen, A.; Facal San Luis, P.; Fajardo Tapia, I.; Falcke, H.; Farrar, G.; Fauth, A. C.; Fazzini, N.; Ferguson, A. P.; Fick, B.; Filevich, A.; Filipcic, A.; Fliescher, S.; Fracchiolla, C. E.; Fraenkel, E. D.; Fratu, O.; Fröhlich, U.; Fuchs, B.; Gaior, R.; Gamarra, R. F.; Gambetta, S.; García, B.; Garcia Roca, S. T.; Garcia-Gamez, D.; Garcia-Pinto, D.; Gascon, A.; Gemmeke, H.; Ghia, P. L.; Giaccari, U.; Giller, M.; Glass, H.; Gold, M. S.; Golup, G.; Gomez Albarracin, F.; Gómez Berisso, M.; Gómez Vitale, P. F.; Gonçalves, P.; Gonzalez, D.; Gonzalez, J. G.; Gookin, B.; Gorgi, A.; Gouffon, P.; Grashorn, E.; Grebe, S.; Griffith, N.; Grigat, M.; Grillo, A. F.; Guardincerri, Y.; Guarino, F.; Guedes, G. P.; Guzman, A.; Hansen, P.; Harari, D.; Harmsma, S.; Harrison, T. A.; Harton, J. L.; Haungs, A.; Hebbeker, T.; Heck, D.; Herve, A. E.; Hojvat, C.; Hollon, N.; Holmes, V. C.; Homola, P.; Hörandel, J. R.; Horneffer, A.; Horvath, P.; Hrabovský, M.; Huber, D.; Huege, T.; Insolia, A.; Ionita, F.; Italiano, A.; Jarne, C.; Jiraskova, S.; Josebachuili, M.; Kadija, K.; Kampert, K. H.; Karhan, P.; Kasper, P.; Kégl, B.; Keilhauer, B.; Keivani, A.; Kelley, J. L.; Kemp, E.; Kieckhafer, R. M.; Klages, H. O.; Kleifges, M.; Kleinfeller, J.; Knapp, J.; Koang, D.-H.; Kotera, K.; Krohm, N.; Krömer, O.; Kruppke-Hansen, D.; Kuehn, F.; Kuempel, D.; Kulbartz, J. K.; Kunka, N.; La Rosa, G.; Lachaud, C.; Lauer, R.; Lautridou, P.; Le Coz, S.; Leão, M. S. A. B.; Lebrun, D.; Lebrun, P.; Leigui de Oliveira, M. A.; Letessier-Selvon, A.; Lhenry-Yvon, I.; Link, K.; López, R.; Lopez Agüera, A.; Louedec, K.; Lozano Bahilo, J.; Lu, L.; Lucero, A.; Ludwig, M.; Lyberis, H.; Macolino, C.; Maldera, S.; Mandat, D.; Mantsch, P.; Mariazzi, A. G.; Marin, J.; Marin, V.; Maris, I. C.; Marquez Falcon, H. R.; Marsella, G.; Martello, D.; Martin, L.; Martinez, H.; Martínez Bravo, O.; Mathes, H. J.; Matthews, J.; Matthews, J. A. J.; Matthiae, G.; Maurel, D.; Maurizio, D.; Mazur, P. O.; Medina-Tanco, G.; Melissas, M.; Melo, D.; Menichetti, E.; Menshikov, A.; Mertsch, P.; Meurer, C.; Micanovic, S.; Micheletti, M. I.; Miramonti, L.; Molina-Bueno, L.; Mollerach, S.; Monasor, M.; Monnier Ragaigne, D.; Montanet, F.; Morales, B.; Morello, C.; Moreno, E.; Moreno, J. C.; Mostafá, M.; Moura, C. A.; Muller, M. A.; Müller, G.; Münchmeyer, M.; Mussa, R.; Navarra, G.; Navarro, J. L.; Navas, S.; Necesal, P.; Nellen, L.; Nelles, A.; Neuser, J.; Newton, D.; Nhung, P. T.; Niechciol, M.; Niemietz, L.; Nierstenhoefer, N.; Nitz, D.; Nosek, D.; Nožka, L.; Nyklicek, M.; Oehlschläger, J.; Olinto, A.; Ortiz, M.; Pacheco, N.; Pakk Selmi-Dei, D.; Palatka, M.; Pallotta, J.; Palmieri, N.; Parente, G.; Parizot, E.; Parra, A.; Pastor, S.; Paul, T.; Pech, M.; Pekala, J.; Pelayo, R.; Pepe, I. M.; Perrone, L.; Pesce, R.; Petermann, E.; Petrera, S.; Petrinca, P.; Petrolini, A.; Petrov, Y.; Pfendner, C.; Piegaia, R.; Pierog, T.; Pieroni, P.; Pimenta, M.; Pirronello, V.; Platino, M.; Ponce, V. H.; Pontz, M.; Porcelli, A.; Privitera, P.; Prouza, M.; Quel, E. J.; Querchfeld, S.; Rautenberg, J.; Ravel, O.; Ravignani, D.; Revenu, B.; Ridky, J.; Riggi, S.; Risse, M.; Ristori, P.; Rivera, H.; Rizi, V.; Roberts, J.; Rodrigues de Carvalho, W.; Rodriguez, G.; Rodriguez Martino, J.; Rodriguez Rojo, J.; Rodriguez-Cabo, I.; Rodríguez-Frías, M. D.; Ros, G.; Rosado, J.; Rossler, T.; Roth, M.; Rouillé-D'Orfeuil, B.; Roulet, E.; Rovero, A. C.; Rühle, C.; Saftoiu, A.; Salamida, F.; Salazar, H.; Salesa Greus, F.; Salina, G.; Sánchez, F.; Santo, C. E.; Santos, E.; Santos, E. M.; Sarazin, F.; Sarkar, B.; Sarkar, S.; Sato, R.; Scharf, N.; Scherini, V.; Schieler, H.; Schiffer, P.; Schmidt, A.; Scholten, O.; Schoorlemmer, H.; Schovancova, J.; Schovánek, P.; Schröder, F.; Schulte, S.; Schuster, D.; Sciutto, S. J.; Scuderi, M.; Segreto, A.; Settimo, M.; Shadkam, A.; Shellard, R. C.; Sidelnik, I.; Sigl, G.; Silva Lopez, H. H.; Sima, O.; Smialkowski, A.; Šmída, R.; Snow, G. R.; Sommers, P.; Sorokin, J.; Spinka, H.; Squartini, R.; Srivastava, Y. N.; Stanic, S.; Stapleton, J.; Stasielak, J.; Stephan, M.; Stutz, A.; Suarez, F.; Suomijärvi, T.; Supanitsky, A. D.; Šuša, T.; Sutherland, M. S.; Swain, J.; Szadkowski, Z.; Szuba, M.; Tapia, A.; Tartare, M.; Tascau, O.; Tavera Ruiz, C. G.; Tcaciuc, R.; Tegolo, D.; Thao, N. T.; Thomas, D.; Tiffenberg, J.; Timmermans, C.; Tkaczyk, W.; Todero Peixoto, C. J.; Toma, G.; Tomé, B.; Tonachini, A.; Travnicek, P.; Tridapalli, D. B.; Tristram, G.; Trovato, E.; Tueros, M.; Ulrich, R.; Unger, M.; Urban, M.; Valdés Galicia, J. F.; Valiño, I.; Valore, L.; van den Berg, A. M.; Varela, E.; Vargas Cárdenas, B.; Vázquez, J. R.; Vázquez, R. A.; Veberic, D.; Verzi, V.; Vicha, J.; Videla, M.; Villaseñor, L.; Wahlberg, H.; Wahrlich, P.; Wainberg, O.; Walz, D.; Watson, A. A.; Weber, M.; Weidenhaupt, K.; Weindl, A.; Werner, F.; Westerhoff, S.; Whelan, B. J.; Widom, A.; Wieczorek, G.; Wiencke, L.; Wilczynska, B.; Wilczynski, H.; Will, M.; Williams, C.; Winchen, T.; Wommer, M.; Wundheiler, B.; Yamamoto, T.; Yapici, T.; Younk, P.; Yuan, G.; Yushkov, A.; Zamorano, B.; Zas, E.; Zavrtanik, D.; Zavrtanik, M.; Zaw, I.; Zepeda, A.; Zhu, Y.; Zimbres Silva, M.; Ziolkowski, M.

    2012-01-01

    The Surface Detector of the Pierre Auger Observatory is sensitive to neutrinos of all flavours above 0.1 EeV. These interact through charged and neutral currents in the atmosphere giving rise to extensive air showers. When interacting deeply in the atmosphere at nearly horizontal incidence,

  5. Corrected Article: Simulation and observation of line-slip structures in columnar structures of soft spheres [Phys. Rev. E 96, 012610 (2017)

    Science.gov (United States)

    Winkelmann, J.; Haffner, B.; Weaire, D.; Mughal, A.; Hutzler, S.

    2017-07-01

    We present the computed phase diagram of columnar structures of soft spheres under pressure, of which the main feature is the appearance and disappearance of line slips, the shearing of adjacent spirals, as pressure is increased. A comparable experimental observation is made on a column of bubbles under forced drainage, clearly exhibiting the expected line slip.

  6. Quicklook overview of model changes in Melcor 2.2: Rev 6342 to Rev 9496

    Energy Technology Data Exchange (ETDEWEB)

    Humphries, Larry L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-05-01

    MELCOR 2.2 is a significant official release of the MELCOR code with many new models and model improvements. This report provides the code user with a quick review and characterization of new models added, changes to existing models, the effect of code changes during this code development cycle (rev 6342 to rev 9496), a preview of validation results with this code version. More detailed information is found in the code Subversion logs as well as the User Guide and Reference Manuals.

  7. Editorial: phys. stat. sol. (b) 241/5

    Science.gov (United States)

    Stutzmann, Martin

    2004-04-01

    Physica status solidi was founded in 1961 by a number of eminent solid state physicists as an attempt to overcome the iron curtain, which then separated East and West, at least in the field of science. Since that time our world has changed quite a bit, and so have the boundary conditions of science publishing. However, one thing has not changed: then as now, the general policy and development of a respectable scientific journal should be determined by a board of independent scientists, who volunteer to assume responsibility for the scientific content of the journal, to assure a fair and critical peer review process for all submitted manuscripts, and, in cases of conflict, to finally decide which papers will be published and which will not.As a matter of fact, an international Board of Editors which consists of scientists coming from different countries and continents, with a good reputation in their respective community, and without any conflict of interest with the Publisher of the journal is, in my opinion, these days more important than ever. As our daily scientific work becomes increasingly specialized, but at the same time also increasingly interdisciplinary, we are more and more forced to trust the quality and reliability of published scientific results in the literature, without really having a chance to come to an independent opinion on our own. This is one of the reasons why the many recent cases of plagiarism, scientific misconduct, or outright fraud have caused such a high level of public awareness. It is quite clear that without a serious peer review there would be an even larger number of such cases in the literature, and that without the responsible action taken by concerned Journal Editors, many of the revealed cases probably would have remained under the carpet.It is, therefore, a particular pleasure for me to introduce to you on the following pages the current Editorial Board of physica status solidi (b) in the form of a brief curriculum vitae, a

  8. Editorial: phys. stat. sol. (a) 201/5

    Science.gov (United States)

    Stutzmann, Martin

    2004-04-01

    Physica status solidi was founded in 1961 by a number of eminent solid state physicists as an attempt to overcome the iron curtain, which then separated East and West, at least in the field of science. Since that time our world has changed quite a bit, and so have the boundary conditions of science publishing. However, one thing has not changed: then as now, the general policy and development of a respectable scientific journal should be determined by a board of independent scientists, who volunteer to assume responsibility for the scientific content of the journal, to assure a fair and critical peer review process for all submitted manuscripts, and, in cases of conflict, to finally decide which papers will be published and which will not.As a matter of fact, an international Board of Editors which consists of scientists coming from different countries and continents, with a good reputation in their respective community, and without any conflict of interest with the Publisher of the journal is, in my opinion, these days more important than ever. As our daily scientific work becomes increasingly specialized, but at the same time also increasingly interdisciplinary, we are more and more forced to trust the quality and reliability of published scientific results in the literature, without really having a chance to come to an independent opinion on our own. This is one of the reasons why the many recent cases of plagiarism, scientific misconduct, or outright fraud have caused such a high level of public awareness. It is quite clear that without a serious peer review there would be an even larger number of such cases in the literature, and that without the responsible action taken by concerned Journal Editors, many of the revealed cases probably would have remained under the carpet.It is, therefore, a particular pleasure for me to introduce to you on the following pages the current Editorial Board of physica status solidi (a) in the form of a brief curriculum vitae, a

  9. Rev-erbα and Rev-erbβ coordinately protect the circadian clock and normal metabolic function

    DEFF Research Database (Denmark)

    Bugge, Anne Skovsø; Feng, Dan; Everett, Logan J

    2012-01-01

    of binding sites across the genome, enriched near metabolic genes. Depletion of both Rev-erbs in liver synergistically derepresses several metabolic genes as well as genes that control the positive limb of the molecular clock. Moreover, deficiency of both Rev-erbs causes marked hepatic steatosis, in contrast......-autonomous clock as well as hepatic lipid metabolism. Mouse embryonic fibroblasts were rendered arrhythmic by depletion of both Rev-erbs. In mouse livers, Rev-erbβ mRNA and protein levels oscillate with a diurnal pattern similar to that of Rev-erbα, and both Rev-erbs are recruited to a remarkably similar set...

  10. Revised Safety Instruction 41 (IS41 REV.)

    CERN Multimedia

    SC Secretariat

    2005-01-01

    Please note that the Revised Safety Instruction No. 41 (IS41 REV.), entitled 'The use of plastic and other non-metallic materials at CERN with respect to fire safety and radiation resistance' is available on the web at the following url: https://edms.cern.ch/document/335806/LAST_RELEASED Paper copies can also be obtained from the SC Unit Secretariat, e-mail: sc.secretariat@cern.ch SC Secretariat

  11. Preface: phys. stat. sol. (b) 243/5

    Science.gov (United States)

    Artacho, Emilio; Beck, Thomas L.; Hernández, Eduardo

    Between 20 and 24 June 2005 the Centre Européen de Calcul Atomique et Moléculaire - or CECAM, as it is more widely known - hosted a workshop entitled State-of-the-art, developments and perspectives of real-space electronic structure methods in condensed-matter and chemical physics, organized with the support of CECAM itself and the ?k network. The workshop was attended by some forty participants coming from fifteen countries, and about thirty presentations were given. The workshop provided a lively forum for the discussion of recent methodological developments in electronic structure calculations, ranging from linear-scaling methods, mesh techniques, time-dependent density functional methods, and a long etcetera, which had been our ultimate objective when undertaking its organization.The first-principles simulation of solids, liquids and complex matter in general has jumped in the last few years from the relatively confined niches in condensed matter and materials physics and in quantum chemistry, to cover most of the sciences, including nano, bio, geo, environmental sciences and engineering. This effect has been propitiated by the ability of simulation techniques to deal with an ever larger degree of complexity. Although this is partially to be attributed to the steady increase in computer power, the main factor behind this change has been the coming of age of the main theoretical framework for most of the simulations performed today, together with an extremely active development of the basic algorithms for its computer implementation. It is this latter aspect that is the topic of this special issue of physica status solidi.There is a relentless effort in the scientific community seeking to achieve not only higher accuracy, but also more efficient, cost-effective and if possible simpler computational methods in electronic structure calculations [1]. From the early 1990s onwards there has been a keen interest in the computational condensed matter and chemical

  12. Introducing RevPASH: The Free Webtool Application

    Directory of Open Access Journals (Sweden)

    Peter Szende

    2014-10-01

    Full Text Available RevPASH (Revenue Per Available Seat Hour is an important measure that helps restaurant operators understand how efficiently each seat in a restaurant generates revenue. The RevPASH app is an easy-to-use web-tool that provides an operator with a quick way to input a few relevant numbers and calculate RevPASH.The application has the ability to compare RevPASH over different times, days, weeks, and months.

  13. Rev 12 as a theology of history

    OpenAIRE

    Joanna Nowińska

    2009-01-01

    The Biblical writers notice history as the space of God’s rule. He is the director, who comes into contact with human being through signs – events and words, and also He is the history’s perpetuum mobile. Rev 12 specifically reflect nowadays and the previous in the context of the whole world’s vision and mix the reference to facts (lack of the temple, ark, faithful people, horrible experiences, the death danger), places (the temple, a desert), persons (the Child-Ruler, Michael) with the Old T...

  14. Solid phase stability of molybdenum under compression: Sound velocity measurements and first-principles calculations

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Xiulu [Laboratory for Shock Wave and Detonation Physics Research, Institute of Fluid Physics, P.O. Box 919-102, 621900 Mianyang, Sichuan (China); Laboratory for Extreme Conditions Matter Properties, Southwest University of Science and Technology, 621010 Mianyang, Sichuan (China); Liu, Zhongli [Laboratory for Shock Wave and Detonation Physics Research, Institute of Fluid Physics, P.O. Box 919-102, 621900 Mianyang, Sichuan (China); College of Physics and Electric Information, Luoyang Normal University, 471022 Luoyang, Henan (China); Jin, Ke; Xi, Feng; Yu, Yuying; Tan, Ye; Dai, Chengda; Cai, Lingcang [Laboratory for Shock Wave and Detonation Physics Research, Institute of Fluid Physics, P.O. Box 919-102, 621900 Mianyang, Sichuan (China)

    2015-02-07

    The high-pressure solid phase stability of molybdenum (Mo) has been the center of a long-standing controversy on its high-pressure melting. In this work, experimental and theoretical researches have been conducted to check its solid phase stability under compression. First, we performed sound velocity measurements from 38 to 160 GPa using the two-stage light gas gun and explosive loading in backward- and forward-impact geometries, along with the high-precision velocity interferometry. From the sound velocities, we found no solid-solid phase transition in Mo before shock melting, which does not support the previous solid-solid phase transition conclusion inferred from the sharp drops of the longitudinal sound velocity [Hixson et al., Phys. Rev. Lett. 62, 637 (1989)]. Then, we searched its structures globally using the multi-algorithm collaborative crystal structure prediction technique combined with the density functional theory. By comparing the enthalpies of body centered cubic structure with those of the metastable structures, we found that bcc is the most stable structure in the range of 0–300 GPa. The present theoretical results together with previous ones greatly support our experimental conclusions.

  15. Rev 12 as a theology of history

    Directory of Open Access Journals (Sweden)

    Joanna Nowińska

    2009-12-01

    Full Text Available The Biblical writers notice history as the space of God’s rule. He is the director, who comes into contact with human being through signs – events and words, and also He is the history’s perpetuum mobile. Rev 12 specifically reflect nowadays and the previous in the context of the whole world’s vision and mix the reference to facts (lack of the temple, ark, faithful people, horrible experiences, the death danger, places (the temple, a desert, persons (the Child-Ruler, Michael with the Old Testament figurative exposing, a typical one for such a book (the Woman with Child, the heaven, the dragon, enriched with a lot of symbols (a crown, a horn, the moon under feet. God’s interference into World history is presented through lightning, voices, thunder, an earthquake and great hail, that stress His power and supremacy. The biblical writer refers to events, which make place whole the time in the natural- and supernatural space, like: the war between God and evil, persecutions, hiding, God’s care of men.  The specific literary structure of Rev 12, contrary to the other parts of that book, seem to help to put an accent for the fundamental truths for transcendental theology of history of which the most important is the eternal rule of God and only accidental, finished in the time perspective of Satan’s position.

  16. Suppression of atherosclerosis by synthetic REV-ERB agonist

    Energy Technology Data Exchange (ETDEWEB)

    Sitaula, Sadichha [Department of Molecular Therapeutics, The Scripps Research Institute, Jupiter, FL 33458 (United States); Billon, Cyrielle [Department of Pharmacological & Physiological Science, Saint Louis University School of Medicine, St. Louis, MO 63104 (United States); Kamenecka, Theodore M.; Solt, Laura A. [Department of Molecular Therapeutics, The Scripps Research Institute, Jupiter, FL 33458 (United States); Burris, Thomas P., E-mail: burristp@slu.edu [Department of Pharmacological & Physiological Science, Saint Louis University School of Medicine, St. Louis, MO 63104 (United States)

    2015-05-08

    The nuclear receptors for heme, REV-ERBα and REV-ERBβ, play important roles in the regulation of metabolism and inflammation. Recently it was demonstrated that reduced REV-ERBα expression in hematopoetic cells in LDL receptor null mice led to increased atherosclerosis. We sought to determine if synthetic REV-ERB agonists that we have developed might have the ability to suppress atherosclerosis in this model. A previously characterized synthetic REV-ERB agonist, SR9009, was used to determine if activation of REV-ERB activity would affect atherosclerosis in LDL receptor deficient mice. Atherosclerotic plaque size was significantly reduced (p < 0.05) in mice administered SR9009 (100 mg/kg) for seven weeks compared to control mice (n = 10 per group). SR9009 treatment of bone marrow-derived mouse macrophages (BMDM) reduced the polarization of BMDMs to proinflammatory M1 macrophage while increasing the polarization of BMDMs to anti-inflammatory M2 macrophages. Our results suggest that pharmacological targeting of REV-ERBs may be a viable therapeutic option for treatment of atherosclerosis. - Highlights: • Synthetic REV-ERB agonist treatment reduced atherosclerosis in a mouse model. • Pharmacological activation of REV-ERB decreased M1 macrophage polarization. • Pharmacological activation of REV-ERB increased M2 macrophage polarization.

  17. Permeability computation on a REV with an immersed finite element method

    International Nuclear Information System (INIS)

    Laure, P.; Puaux, G.; Silva, L.; Vincent, M.

    2011-01-01

    An efficient method to compute permeability of fibrous media is presented. An immersed domain approach is used to represent the porous material at its microscopic scale and the flow motion is computed with a stabilized mixed finite element method. Therefore the Stokes equation is solved on the whole domain (including solid part) using a penalty method. The accuracy is controlled by refining the mesh around the solid-fluid interface defined by a level set function. Using homogenisation techniques, the permeability of a representative elementary volume (REV) is computed. The computed permeabilities of regular fibre packings are compared to classical analytical relations found in the bibliography.

  18. Comment on 'Nonlinear gyrokinetic theory with polarization drift' [Phys. Plasmas 17, 082304 (2010)

    International Nuclear Information System (INIS)

    Leerink, S.; Parra, F. I.; Heikkinen, J. A.

    2010-01-01

    In this comment, we show that by using the discrete particle distribution function the changes of the phase-space volume of gyrocenter coordinates due to the fluctuating ExB velocity do not explicitly appear in the Poisson equation and the [Sosenko et al., Phys. Scr. 64, 264 (2001)] result is recovered. It is demonstrated that there is no contradiction between the work presented by Sosenko et al. and the work presented by [Wang et al., Phys. Plasmas 17, 082304 (2010)].

  19. Critical test of vibrational dephasing theories in solids using spontaneous Raman scattering in isotopically mixed crystals

    International Nuclear Information System (INIS)

    Marks, S.; Cornelius, P.A.; Harris, C.B.

    1980-01-01

    A series of experiments have been conducted in order to evaluate the relative importance of several recent theories of vibrational dephasing in solids. The theories are discussed briefly, and are used to interpret the temperature dependence of the C--H and C--D stretch bands in the spontaneous Raman spectra of h 14 - and d 14 -1,2,4,5-tetramethyl benzene (durene). The infrared spectra of these same molecules are also reported in the region of the combination bands involving C--H (or C--D) stretches and low-frequency modes. The results support the applicability of the model of Harris et al., [C. B. Harris, R. M. Shelby and P. A. Cornelius, Phys. Rev. Lett. 38, 1415 (1977); Chem Phys. Lett. 57, 8 (1978); R. M. Shelby, C. B. Harris, and P. A. Cornelius, J. Chem. Phys. 70, 34 (1979)], based on energy exchange in anharmonically coupled low-frequency modes. This theory is then used, in connection with Raman spectra obtained in isotopically mixed samples of durene, to elucidate the vibrational dynamics underlying the dephasing. It is found that the results are consistent with the hypothesis that some low-frequency modes in this molecule are significantly delocalized or ''excitonic'' in character, and that this delocalization may be studied by means of Raman spectroscopy on the low-frequency modes themselves, as well as by exchange analysis of the coupled high-frequency modes. These conclusions represent a generalization and extension of the previously published exchange model [R. M. Shelby, C. B. Harris, and P. A. Cornelius, J. Chem Phys. 70, 34 (1979)

  20. Analytical model for the effects of wetting on thermal boundary conductance across solid/classical liquid interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Caplan, Matthew E.; Giri, Ashutosh; Hopkins, Patrick E., E-mail: phopkins@virginia.edu [Department of Mechanical and Aerospace Engineering, University of Virginia, Charlottesville, Virginia 22904 (United States)

    2014-04-21

    We develop an analytical model for the thermal boundary conductance between a solid and a liquid. By infusing recent developments in the phonon theory of liquid thermodynamics with diffuse mismatch theory, we derive a closed form model that can predict the effects of wetting on the thermal boundary conductance across an interface between a solid and a classical liquid. We account for the complete wetting (hydrophilicity), or lack thereof (hydrophobicity), of the liquid to the solid by considering varying contributions of transverse mode interactions between the solid and liquid interfacial layers; this transverse coupling relationship is determined with local density of states calculations from molecular dynamics simulations between Lennard-Jones solids and a liquids with different interfacial interaction energies. We present example calculations for the thermal boundary conductance between both hydrophobic and hydrophilic interfaces of Al/water and Au/water, which show excellent agreement with measured values reported by Ge et al. [Z. Ge, D. G. Cahill, and P. V. Braun, Phys. Rev. Lett. 96, 186101 (2006)]. Our model does not require any fitting parameters and is appropriate to model heat flow across any planar interface between a solid and a classical liquid.

  1. Administrative Circular No. 14 (Rev. 2)

    CERN Document Server

    HR Department

    2007-01-01

    The HR Department wishes to draw the attention of members of the personnel to a number of amendments to Administrative Circular No. 14 (Rev. 2) entitled "Protection of members of the personnel against the financial consequences of illness, accident and disability" which came into force on 1st July 2006 (cf. Weekly Bulletin of 14 and 21 August 2006). Occupational Accident Declaration Form (HS50) https://cern.ch/service-procedures/AdminMan/Forms/HS50E.doc •\tIt must be completed within 10 working days of the date on which the accident occurred (§ 29.2.1), unless the person concerned is materially unable to meet this deadline. • The completed formula must be accompanied by a medical certificate giving details of any bodily injuries resulting from the accident (Annex 1, § 5). The medical certificate must be obtained from the doctor who has been consulted for that purpose. Benefits resulting from illnesses and accidents Medical treatment will cease to be reimbursed under ...

  2. REV-ERB-ALPHA circadian gene variant associates with obesity in two independent populations: Mediterranean and North American.

    Science.gov (United States)

    Garaulet, Marta; Smith, Caren E; Gomez-Abellán, Purificación; Ordovás-Montañés, María; Lee, Yu-Chi; Parnell, Laurence D; Arnett, Donna K; Ordovás, José M

    2014-04-01

    Despite the solid connection between REV-ERB and obesity, the information about whether genetic variations at this locus may be associated with obesity traits is scarce. Therefore our objective was to study the association between REV-ERB-ALPHA1 rs2314339 and obesity in two independent populations. Participants were 2214 subjects from Spanish Mediterranean (n = 1404) and North American (n = 810) populations. Anthropometric, biochemical, dietary, and genotype analyses were performed. We found novel associations between the REV-ERB-ALPHA1 rs2314339 genotype and obesity in two independent populations: in Spanish Mediterranean and North American groups, the frequency of the minor-allele-carriers (AA+ AG) was significantly lower in the "abdominally obese" group than in those of the "nonabdominally obese" group (p obesity than noncarriers, and the effect was of similar magnitude for both populations (OR ≈ 1.50). There were consistent associations between REV-ERB-ALPHA1 genotype and obesity-related traits (p obesity was also detected in the Mediterranean population. This new discovery highlights the importance of REV-ERB-ALPHA1 in obesity and provides evidence for the connection between our biological clock and obesity-related traits. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Biallelic inactivation of REV7 is associated with Fanconi anemia.

    Science.gov (United States)

    Bluteau, Dominique; Masliah-Planchon, Julien; Clairmont, Connor; Rousseau, Alix; Ceccaldi, Raphael; Dubois d'Enghien, Catherine; Bluteau, Olivier; Cuccuini, Wendy; Gachet, Stéphanie; Peffault de Latour, Régis; Leblanc, Thierry; Socié, Gérard; Baruchel, André; Stoppa-Lyonnet, Dominique; D'Andrea, Alan D; Soulier, Jean

    2016-09-01

    Fanconi anemia (FA) is a recessive genetic disease characterized by congenital abnormalities, chromosome instability, progressive bone marrow failure (BMF), and a strong predisposition to cancer. Twenty FA genes have been identified, and the FANC proteins they encode cooperate in a common pathway that regulates DNA crosslink repair and replication fork stability. We identified a child with severe BMF who harbored biallelic inactivating mutations of the translesion DNA synthesis (TLS) gene REV7 (also known as MAD2L2), which encodes the mutant REV7 protein REV7-V85E. Patient-derived cells demonstrated an extended FA phenotype, which included increased chromosome breaks and G2/M accumulation upon exposure to DNA crosslinking agents, γH2AX and 53BP1 foci accumulation, and enhanced p53/p21 activation relative to cells derived from healthy patients. Expression of WT REV7 restored normal cellular and functional phenotypes in the patient's cells, and CRISPR/Cas9 inactivation of REV7 in a non-FA human cell line produced an FA phenotype. Finally, silencing Rev7 in primary hematopoietic cells impaired progenitor function, suggesting that the DNA repair defect underlies the development of BMF in FA. Taken together, our genetic and functional analyses identified REV7 as a previously undescribed FA gene, which we term FANCV.

  4. Analysis of translesion DNA synthesis activity of the human REV1-REV7 complex, which is a key player in radiation-induced mutagenesis

    International Nuclear Information System (INIS)

    Masuda, Y.; Masuda, K.; Kamiya, K.

    2003-01-01

    Full text: Ionizing radiation frequently causes oxidative DNA damage in cells. It has been suggested that functions of the REV1 and REV7 genes are induction of mutations and prevention of cell death caused by ionizing radiation. With yeast Saccharomyces cerevisiae, results from a variety of investigations have demonstrated that the REV genes play a major role in induction of mutations through replication processes which directly copy the damaged DNA template during DNA replication. However, in higher eucaryotes, functions of homologues are poorly understood and appear somewhat different from the yeast case. It has been suggested that human REV1 interacts with human REV7, this being specific to higher eucaryotes. Here we show that purified human REV1 and REV7 proteins form a heterodimer in solution, which is stable through intensive purification steps. Results from biochemical analysis of the transferase reactions of the REV1-REV7 complex demonstrated, in contrast to the case of yeast Rev3 whose polymerase activity is stimulated by assembly with yeast Rev7, that human REV7 did not influence the stability, substrate specificity or kinetic parameters of the transferase reactions of REV1 protein. A possible molecular role of the REV7 subunit may be to help assembly of the REV1 protein to a large complex containing REV3 and/or other DNA polymerases in higher eucaryotes

  5. Analysis of the influence of subcellular localization of the HIV Rev protein on Rev-dependent gene expression by multi-fluorescence live-cell imaging

    International Nuclear Information System (INIS)

    Wolff, Horst; Hadian, Kamyar; Ziegler, Manja; Weierich, Claudia; Kramer-Hammerle, Susanne; Kleinschmidt, Andrea; Erfle, Volker; Brack-Werner, Ruth

    2006-01-01

    The human immunodeficiency virus Rev protein is a post-transcriptional activator of HIV gene expression. Rev is a nucleocytoplasmic shuttle protein that displays characteristic nuclear/nucleolar subcellular localization in various cell lines. Cytoplasmic localization of Rev occurs under various conditions disrupting Rev function. The goal of this study was to investigate the relationship between localization of Rev and its functional activity in living cells. A triple-fluorescent imaging assay, called AQ-FIND, was established for automatic quantitative evaluation of nucleocytoplasmic distribution of fluorescently tagged proteins. This assay was used to screen 500 rev genes generated by error-prone PCR for Rev mutants with different localization phenotypes. Activities of the Rev mutants were determined with a second quantitative, dual-fluorescent reporter assay. In HeLa cells, the majority of nuclear Rev mutants had activities similar to wild-type Rev. The activities of Rev mutants with abnormal cytoplasmic localization ranged from moderately impaired to nonfunctional. There was no linear correlation between subcellular distribution and levels of Rev activity. In astrocytes, nuclear Rev mutants showed similar impaired activities as the cytoplasmic wild-type Rev. Our data suggest that steady-state subcellular localization is not a primary regulator of Rev activity but may change as a secondary consequence of altered Rev function. The methodologies described here have potential for studying the significance of subcellular localization for functions of other regulatory factors

  6. Wave power plant at Horns Rev. Screening[Denmark]; Boelgekraftanlaeg ved Horns Rev. Screening

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, Hans C.; Nielsen, Kim; Steenstrup, P.R.; Friis-Madsen, E.; Wigant, L.

    2005-12-15

    The objective for the analysis has been to establish data for the sea at Horns Rev wind farm in the North Sea in order to assess the opportunity for using the site as test site for demonstration of wave energy devices exemplified by three different devices under development in Denmark. For comparison alternative sites like Hanstholm, Samsoe and Nissum Bredning are also assessed as well as the test centre EMEC at the Orkney Islands and the proposed test site Wave Hub at the north coast of Cornwall. The analysis shows that it is possible without major technical problems to connect 2-4 MW power generated by 3 different wave energy devices (AquaBuOY, Wave Star Energy and Wave Dragon) to the wind farm at Horns Rev (www.hornsrev.dk). The expenses for connection and regulation within the wind farm is about 200,000 DKK (30,00 EURO). On top of this comes the cost for individual sub sea cable connection to the wave devices, pull in of the sub sea cable through the existing J-tube in turbine T04 and the necessary regulation/control system in the individual wave devices to avoid damaging the power system in case of too high production. The analysis of the co-production of wind and wave power is dealt with in a separate report which shows that over a time period of half to one hour the time variation for wind generated electricity is 3 times as large as for wave energy generated power based on the actual measurement at Horns Rev. Further on the analysis shows that the wave generated power is more predictable than wind energy generated power as the power from the waves first is present about 2 hours after the wind is acting and last for 3 to 6 hours after the wind dies out; 6 to 12 hours with wind from west. The time is off course strongly depending of the direction of the wind i.e. the fetch. As this special report has a more general scope than the analysis as such it is reported in English (Annex Report II). The analysis shows that it is up to the individual device developer

  7. Physics, radiology, and chemistry. 7. rev. ed.

    International Nuclear Information System (INIS)

    Linde, O.K.; Knigge, H.J.

    1986-01-01

    This book is an introduction to physics and chemistry especially for medical personnel. After a general introduction, measurement methods, mechanics including mechanics of solid bodies, fluids and gases, heat, optics, acoustics, electricity, radiations including their biological effects, general chemistry, inorganic and organic chemistry are treated. Every chapter contains exercises mostly in connection with medical and biological effects. Furthermore, connections with biology and medicine are considered. The chapters on physiological chemistry, computer and information theory, chemistry and ecology, and metabolism have been rewritten. (orig./HP) [de

  8. Administrative Circular N° 26 (Rev.  5) - November 2004

    CERN Multimedia

    Human Resources Department

    2004-01-01

    Procedure governing the career evolution of staff members The introduction of an electronic individual appraisal report form via EDH for the MAPS exercise entails some modifications to Administrative Circular N° 26 (Rev. 4). The revised version (Rev. 5) is available in departmental secretariats as well as on the Web at the following address: http://cern.ch/hr-web/internal/admin_services/admincirc/listadmincirc.asp Human Resources Department Tel. 74128

  9. Altered Sleep Homeostasis in Rev-erbα Knockout Mice.

    Science.gov (United States)

    Mang, Géraldine M; La Spada, Francesco; Emmenegger, Yann; Chappuis, Sylvie; Ripperger, Jürgen A; Albrecht, Urs; Franken, Paul

    2016-03-01

    The nuclear receptor REV-ERBα is a potent, constitutive transcriptional repressor critical for the regulation of key circadian and metabolic genes. Recently, REV-ERBα's involvement in learning, neurogenesis, mood, and dopamine turnover was demonstrated suggesting a specific role in central nervous system functioning. We have previously shown that the brain expression of several core clock genes, including Rev-erbα, is modulated by sleep loss. We here test the consequences of a loss of REV-ERBα on the homeostatic regulation of sleep. EEG/EMG signals were recorded in Rev-erbα knockout (KO) mice and their wild type (WT) littermates during baseline, sleep deprivation, and recovery. Cortical gene expression measurements after sleep deprivation were contrasted to baseline. Although baseline sleep/wake duration was remarkably similar, KO mice showed an advance of the sleep/wake distribution relative to the light-dark cycle. After sleep onset in baseline and after sleep deprivation, both EEG delta power (1-4 Hz) and sleep consolidation were reduced in KO mice indicating a slower increase of homeostatic sleep need during wakefulness. This slower increase might relate to the smaller increase in theta and gamma power observed in the waking EEG prior to sleep onset under both conditions. Indeed, the increased theta activity during wakefulness predicted delta power in subsequent NREM sleep. Lack of Rev-erbα increased Bmal1, Npas2, Clock, and Fabp7 expression, confirming the direct regulation of these genes by REV-ERBα also in the brain. Our results add further proof to the notion that clock genes are involved in sleep homeostasis. Because accumulating evidence directly links REV-ERBα to dopamine signaling the altered homeostatic regulation of sleep reported here are discussed in that context. © 2016 Associated Professional Sleep Societies, LLC.

  10. On the dual symmetry between absorbing and amplifying random ...

    Indian Academy of Sciences (India)

    (Paris), 48, 527 (1987). [20] C Vanneste and P Sebbah, Phys. Rev. Lett. 87, 183903 (2001). P Sebbah and C Vanneste, Phys. Rev. B66, 144202 (2002). [21] X Jiang and C M Soukoulis, Phys. Rev. Lett. 85, 70 (2000). [22] M Ya Azbel, Solid State Commun. 45, 527 (1983). [23] J B Pendry, A Mackinnon and P J Roberts, Proc.

  11. 530 Saroj K Nayak and Ramakrishna Ramaswamy

    Indian Academy of Sciences (India)

    Catlow C R A Parker SC and Allen M P 1990 Computer Modeling of fluids, polymers and Solids (Kluwer. Academic Publishers). Dhar D 1990 Phys. Rev. Lett. 64 1613. Dhar D and Ramaswamy R 1989 Phys. Rev. Lett. 63 1659. Dutta P and Horn P M 1981 Rev. Mod. Phys. 53 497. Frank H S and Wen WY 1987 Discuss, ...

  12. Improving Science Teacher Preparation through the APS PhysTEC and NSF Noyce Programs

    Science.gov (United States)

    Williams, Tasha; Tyler, Micheal; van Duzor, Andrea; Sabella, Mel

    2013-03-01

    Central to the recruitment of students into science teaching at a school like CSU, is a focus on the professional nature of teaching. The purpose of this focus is twofold: it serves to change student perceptions about teaching and it prepares students to become teachers who value continued professional development and value the science education research literature. The Noyce and PhysTEC programs at CSU place the professional nature of teaching front and center by involving students in education research projects, paid internships, attendance at conferences, and participation in a new Teacher Immersion Institute and a Science Education Journal Reading Class. This poster will focus on specific components of our teacher preparation program that were developed through these two programs. In addition we will describe how these new components provide students with diverse experiences in the teaching of science to students in the urban school district. Supported by the NSF Noyce Program (0833251) and the APS PhysTEC Program.

  13. First experimental evidence of hydrodynamic tunneling of ultra-relativistic protons in extended solid copper target at the CERN HiRadMat facility

    Science.gov (United States)

    Schmidt, R.; Blanco Sancho, J.; Burkart, F.; Grenier, D.; Wollmann, D.; Tahir, N. A.; Shutov, A.; Piriz, A. R.

    2014-08-01

    A novel experiment has been performed at the CERN HiRadMat test facility to study the impact of the 440 GeV proton beam generated by the Super Proton Synchrotron on extended solid copper cylindrical targets. Substantial hydrodynamic tunneling of the protons in the target material has been observed that leads to significant lengthening of the projectile range, which confirms our previous theoretical predictions [N. A. Tahir et al., Phys. Rev. Spec. Top.-Accel. Beams 15, 051003 (2012)]. Simulation results show very good agreement with the experimental measurements. These results have very important implications on the machine protection design for powerful machines like the Large Hadron Collider (LHC), the future High Luminosity LHC, and the proposed huge 80 km circumference Future Circular Collider, which is currently being discussed at CERN. Another very interesting outcome of this work is that one may also study the field of High Energy Density Physics at this test facility.

  14. First experimental evidence of hydrodynamic tunneling of ultra–relativistic protons in extended solid copper target at the CERN HiRadMat facility

    CERN Document Server

    Schmidt, R; Sancho, J Blanco; Burkart, F; Grenier, D; Wollmann, D; Tahir, N A; Shutov, A; Piriz, A R

    2014-01-01

    A novel experiment has been performed at the CERN HiRadMat test facility to study the impact of the 440 GeV proton beam generated by the Super Proton Synchrotron on extended solid copper cylindrical targets. Substantial hydrodynamic tunneling of the protons in the target material has been observed that leads to significant lengthening of the projectile range, which confirms our previous theoretical predictions [N. A. Tahir et al., Phys. Rev. Spec. Top.-Accel. Beams 15, 051003 (2012)]. Simulation results show very good agreement with the experimental measurements. These results have very important implications on the machine protection design for powerful machines like the Large Hadron Collider (LHC), the future High Luminosity LHC, and the proposed huge 80 km circumference Future Circular Collider, which is currently being discussed at CERN. Another very interesting outcome of this work is that one may also study the field of High Energy Density Physics at this test facility.

  15. Binding and thermodynamics of REV peptide-ctDNA interaction.

    Science.gov (United States)

    Upadhyay, Santosh Kumar

    2017-03-01

    The thermodynamics of DNA-ligand binding is important as it provides useful information to understand the details of binding processes. HIV-1 REV response element (RRE) located in the env coding region of the viral genome is reported to be well conserved across different HIV-1 isolates. In this study, the binding characteristics of Calf thymus DNA (ctDNA) and REV peptide from HIV-1 were investigated using spectroscopic (UV-visible, fluorescence, and circular dichroism (CD)) and isothermal titration calorimetric (ITC) techniques. Thermal stability and ligand binding properties of the ctDNA revealed that native ctDNA had a T m of 75.5 °C, whereas the ctDNA-REV peptide complex exhibited an incremental shift in the T m by 8 °C, indicating thermal stability of the complex. CD data indicated increased ellipticity due to large conformational changes in ctDNA molecule upon binding with REV peptide and two binding stoichiometric modes are apparent. The ctDNA experienced condensation due to large conformational changes in the presence of REV peptide and positive B→Ψ transition was observed at higher molar charge ratios. Fluorescence studies performed at several ligand concentrations revealed a gradual decrease in the fluorescence intensity of EtBr-bound ctDNA in response to increasing ligand concentrations. The fluorescence data further confirmed two stoichiometric modes of binding for ctDNA-REV peptide complex as previously observed with CD studies. The binding enthalpies were determined using ITC in the temperature range of 293 K-308 K. The ITC binding isotherm was exothermic at all temperatures examined, with low ΔH values indicating that the ctDNA-REV peptide interaction is driven largely by entropy. The heat capacity change (ΔC p ) was insignificant, an unusual finding in the area of DNA-peptide interaction studies. The variation in the values obtained for ΔH, ΔS, and ΔG with temperature further suggests that ctDNA-REV peptide interaction is entropically

  16. A virtual test of screening technology based on the AGEIA PhysX

    Energy Technology Data Exchange (ETDEWEB)

    Ai-min Li; Rui-ling Lv; Chu-sheng Liu [China University of Mining and Technology, Xuzhou (China). School of Mechanical and Electrical Engineering

    2008-06-15

    The authors have created a virtual test of vibration particle-screening using Autodesk's 3ds Max software, the MAXScript scripting language and the AGEIA PhysX physics processing unit (PPU). The affect of various parameters on screening efficiency were modeled. The parameters included vibration amplitude, frequency and direction. The length and inclination of the vibrating surface were also varied. The virtual experiment is in basic agreement with results predicted from screening theory. This shows that the virtual screener can be used for preliminary investigations and the results used to evaluate screen design. In addition it can help with theoretical research. 11 refs., 7 figs., 7 tabs.

  17. Intermolecular masking of the HIV-1 Rev NLS by the cellular protein HIC: novel insights into the regulation of Rev nuclear import.

    LENUS (Irish Health Repository)

    Gu, Lili

    2011-01-01

    The HIV-1 regulatory protein Rev, which is essential for viral replication, mediates the nuclear export of unspliced viral transcripts. Rev nuclear function requires active nucleocytoplasmic shuttling, and Rev nuclear import is mediated by the recognition of its Nuclear Localisation Signal (NLS) by multiple import factors, which include transportin and importin β. However, it remains unclear which nuclear import pathway(s) predominate in vivo, and the cellular environment that modulates Rev nucleocytoplasmic shuttling remains to be characterised.

  18. Administrative Circular No. 26 (Rev. 9) – Recognition of Merit

    CERN Multimedia

    2012-01-01

    Administrative Circular No. 26 (Rev. 9) entitled "Recognition of Merit”, approved by the Director-General following discussion in the Standing Concertation Committee meeting on 27 September 2011 is available on the intranet site of the Human Resources Department: https://cern.ch/hr-docs/admincirc/admincirc.asp The circular was above all revised in order to integrate the new CERN Competency Model into the annual procedure of performance appraisal. It cancels and replaces Administrative Circular No. 26 (Rev. 8) entitled "Recognition of merit” of September 2008. Department Head Office HR Department

  19. Administrative Circular No. 26 (Rev. 7) – May 2007

    CERN Multimedia

    HR Department

    2007-01-01

    Recognition of Merit of Staff Members Administrative Circular No. 26 (Rev. 7) is now available on the intranet site of the Human Resources Department. This circular cancels and replaces Administrative Circular No. 26 (Rev. 6) - Procedures governing the career development of staff members. Copies will shortly be available in Departmental secretariats. If you require any additional information on the new staff-member merit assessment and recognition system, you may consult the FAQ, which has been available on the Human Resources Department intranet site since February 2007. Human Resources Department Tel. 78003

  20. Intermolecular masking of the HIV-1 Rev NLS by the cellular protein HIC: Novel insights into the regulation of Rev nuclear import.

    LENUS (Irish Health Repository)

    Gu, Lili

    2011-03-14

    Abstract Background The HIV-1 regulatory protein Rev, which is essential for viral replication, mediates the nuclear export of unspliced viral transcripts. Rev nuclear function requires active nucleocytoplasmic shuttling, and Rev nuclear import is mediated by the recognition of its Nuclear Localisation Signal (NLS) by multiple import factors, which include transportin and importin β. However, it remains unclear which nuclear import pathway(s) predominate in vivo, and the cellular environment that modulates Rev nucleocytoplasmic shuttling remains to be characterised. Results In our study, we have identified the cellular protein HIC (Human I-mfa domain-Containing protein) as a novel interactor of HIV-1 Rev. We demonstrate that HIC selectively interferes with Rev NLS interaction with importin β and impedes its nuclear import and function, but does not affect Rev nuclear import mediated by transportin. Hence, the molecular determinants mediating Rev-NLS recognition by importin β and transportin appear to be distinct. Furthermore, we have employed HIC and M9 M, a peptide specifically designed to inhibit the transportin-mediated nuclear import pathway, to characterise Rev nuclear import pathways within different cellular environments. Remarkably, we could show that in 293T, HeLa, COS7, Jurkat, U937, THP-1 and CEM cells, Rev nuclear import is cell type specific and alternatively mediated by transportin or importin β, in a mutually exclusive fashion. Conclusions Rev cytoplasmic sequestration by HIC may represent a novel mechanism for the control of Rev function. These studies highlight that the multivalent nature of the Rev NLS for different import receptors enables Rev to adapt its nuclear trafficking strategy.

  1. Intermolecular masking of the HIV-1 Rev NLS by the cellular protein HIC: Novel insights into the regulation of Rev nuclear import

    Directory of Open Access Journals (Sweden)

    Sheehy Noreen

    2011-03-01

    Full Text Available Abstract Background The HIV-1 regulatory protein Rev, which is essential for viral replication, mediates the nuclear export of unspliced viral transcripts. Rev nuclear function requires active nucleocytoplasmic shuttling, and Rev nuclear import is mediated by the recognition of its Nuclear Localisation Signal (NLS by multiple import factors, which include transportin and importin β. However, it remains unclear which nuclear import pathway(s predominate in vivo, and the cellular environment that modulates Rev nucleocytoplasmic shuttling remains to be characterised. Results In our study, we have identified the cellular protein HIC (Human I-mfa domain-Containing protein as a novel interactor of HIV-1 Rev. We demonstrate that HIC selectively interferes with Rev NLS interaction with importin β and impedes its nuclear import and function, but does not affect Rev nuclear import mediated by transportin. Hence, the molecular determinants mediating Rev-NLS recognition by importin β and transportin appear to be distinct. Furthermore, we have employed HIC and M9 M, a peptide specifically designed to inhibit the transportin-mediated nuclear import pathway, to characterise Rev nuclear import pathways within different cellular environments. Remarkably, we could show that in 293T, HeLa, COS7, Jurkat, U937, THP-1 and CEM cells, Rev nuclear import is cell type specific and alternatively mediated by transportin or importin β, in a mutually exclusive fashion. Conclusions Rev cytoplasmic sequestration by HIC may represent a novel mechanism for the control of Rev function. These studies highlight that the multivalent nature of the Rev NLS for different import receptors enables Rev to adapt its nuclear trafficking strategy.

  2. Comment on “Effects of damping solitary wave in a viscosity bounded plasma” [Phys. Plasmas 21, 022118 (2014)

    Energy Technology Data Exchange (ETDEWEB)

    Ghosh, Uday Narayan, E-mail: unghosh1@rediffmail.com; Chatterjee, Prasanta; Roychoudhury, Rajkumar [Department of Mathematics, Siksha Bhavana, Visva Bharati, Santiniketan 731235 (India)

    2015-07-15

    Recently Gun Li et al. discussed “Effects of damping solitary wave in a viscosity bounded plasma” [Phys. Plasmas 21, 022118 (2014)]. The paper contains some serious errors which have been pointed out in this Comment.

  3. A DEAD box protein facilitates HIV-1 replication as a cellular co-factor of Rev

    International Nuclear Information System (INIS)

    Fang Jianhua; Kubota, Satoshi; Yang Bin; Zhou Naiming; Zhang Hui; Godbout, Roseline; Pomerantz, Roger J.

    2004-01-01

    HIV-1 Rev escorts unspliced viral mRNAs out of the nucleus of infected cells, which allows formation of infectious HIV-1 virions. We have identified a putative DEAD box (Asp-Glu-Ala-Asp) RNA helicase, DDX1, as a cellular co-factor of Rev, through yeast and mammalian two-hybrid systems using the N-terminal motif of Rev as 'bait'. DDX1 is not a functional homolog of HIV-1 Rev, but down-regulation of DDX1 resulted in an alternative splicing pattern of Rev-responsive element (RRE)-containing mRNA, and attenuation of Gag p24 antigen production from HLfb rev(-) cells rescued by exogenous Rev. Co-transfection of a DDX1 expression vector with HIV-1 significantly increased viral production. DDX1 binding to Rev, as well as to the RRE, strongly suggest that DDX1 affects Rev function through the Rev-RRE axis. Moreover, down-regulation of DDX1 altered the steady state subcellular distribution of Rev, from nuclear/nucleolar to cytoplasmic dominance. These findings indicate that DDX1 is a critical cellular co-factor for Rev function, which maintains the proper subcellular distribution of this lentiviral regulatory protein. Therefore, alterations in DDX1-Rev interactions could induce HIV-1 persistence and targeting DDX1 may lead to rationally designed and novel anti-HIV-1 strategies and therapeutics

  4. Operational circular No. 1 (Rev. 1) – Operational circulars

    CERN Multimedia

    HR Department

    2011-01-01

    Operational Circular No. 1 (Rev. 1) is applicable to members of the personnel and other persons concerned. Operational Circular No. 1 (Rev. 1) entitled "Operational circulars", approved following discussion at the Standing Concertation Committee meeting on 4 May 2011, is available on the intranet site of the Human Resources Department: https://hr-docs.web.cern.ch/hr-docs/opcirc/opcirc.asp It cancels and replaces Operational Circular No. 1 entitled "Operational Circulars” of December 1996. This new version clarifies, in particular, that operational circulars do not necessarily arise from the Staff Rules and Regulations, and the functional titles have been updated to bring them into line with the current CERN organigram. Department Head Office  

  5. Administrative Circular No. 26 (Rev.10) - Recognition of merit

    CERN Multimedia

    2014-01-01

    Administrative Circular No. 26 (Rev. 10) entitled “Recognition of Merit”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 5 December 2013 and entering into force on 1 January 2014, is available on the intranet site of the Human Resources Department (see here).   This circular is applicable to staff members. It cancels and replaces Administrative Circular No. 26 (Rev. 9) entitled “Recognition of Merit” of December 2011. The circular was revised in order to take into account the work performed in the framework of an elective mandate during the exercise of merit recognition of staff members. In addition, the circular was revised to provide that, in the case of staff members on special leave for professional reasons for a period equal to or longer than half a year, it will no longer be possible to grant an exceptional advancement. Department Head Office HR Department

  6. Administrative Circular No. 23 (Rev. 4) - Special working hours

    CERN Document Server

    Department Head Office - HR Department

    2016-01-01

    Administrative Circular No. 23 (Rev. 4) entitled "Special working hours", approved by the Director-General following discussion in the Standing Concertation Committee meeting on 22 March 2016, will be available on 1st September 2016 via the following link: https://cds.cern.ch/record/2208539.   This revised circular cancels and replaces Administrative Circular No. 23 (Rev. 3) also entitled "Special working hours" of January 2013. This document contains modifications to reflect the new career structure and ensuring the provision consistent with practice that compensation or remuneration of special working hours performed remotely is possible only in case of emergency.   This circular will enter into force on 1st September 2016.

  7. Meteorological explanation of wake clouds at Horns Rev wind farm

    Energy Technology Data Exchange (ETDEWEB)

    Emeis, S. [Karlsruhe Institute of Technology (Germany). Inst. for Meteorology and Climate Research

    2010-08-15

    The occurrence of wake clouds at Horns Rev wind farm is explained as mixing fog. Mixing fog forms when two nearly saturated air masses with different temperature are mixed. Due to the non-linearity of the dependence of the saturation water vapour pressure on temperature, the mixed air mass is over-saturated and condensation sets in. On the day in February 2008, when the wake clouds were observed at Horns Rev, cold and very humid air was advected from the nearby land over the warmer North Sea and led to the formation of a shallow layer with sea smoke or fog close above the sea surface. The turbines mixed a much deeper layer and thus provoked the formation of cloud trails in the wakes of the turbines. (orig.)

  8. REV-ERB and ROR: therapeutic targets for treating myopathies

    Science.gov (United States)

    Welch, Ryan D.; Flaveny, Colin A.

    2017-08-01

    Muscle is primarily known for its mechanical roles in locomotion, maintenance of posture, and regulation of cardiac and respiratory function. There are numerous medical conditions that adversely affect muscle, myopathies that disrupt muscle development, regeneration and protein turnover to detrimental effect. Skeletal muscle is also a vital secretory organ that regulates thermogenesis, inflammatory signaling and directs context specific global metabolic changes in energy substrate preference on a daily basis. Myopathies differ in the causative factors that drive them but share common features including severe reduction in quality of life and significantly increased mortality all due irrefutably to the loss of muscle mass. Thus far clinically viable approaches for preserving muscle proteins and stimulating new muscle growth without unwanted side effects or limited efficacy has been elusive. Over the last few decades, evidence has emerged through in vitro and in vivo studies that suggest the nuclear receptors REV-ERB and ROR might modulate pathways involved in myogenesis and mitochondrial biogenesis. Hinting that REV-ERB and ROR might be targeted to treat myopathies. However there is still a need for substantial investigation into the roles of these nuclear receptors in in vivo rodent models of degenerative muscle diseases and acute injury. Although exciting, REV-ERB and ROR have somewhat confounding roles in muscle physiology and therefore more studies utilizing in vivo models of skeletal muscle myopathies are needed. In this review we highlight the molecular forces driving some of the major degenerative muscular diseases and showcase two promising molecular targets that may have the potential to treat myopathies: ROR and REV-ERB.

  9. ENDF/B-5 Fission Products Library. Rev. 2

    International Nuclear Information System (INIS)

    Schwerer, O.; Pronyaev, V.G.; Lemmel, H.D.

    1984-07-01

    This document summarizes contents and documentation of the 1984 version of the Fission Products Nuclear Data File of the ENDF/B-5 Library (Rev. 2) maintained by the National Nuclear Data Center (NNDC) at the Brookhaven National Laboratory, USA. This file contains numerical neutron reaction data and decay data for 877 fission product nuclides. The entire file or selective retrievals from it can be obtained on magnetic tape from the IAEA Nuclear Data Section. (author)

  10. Nonlinear electronic excitations in crystalline solids using meta-generalized gradient approximation and hybrid functional in time-dependent density functional theory

    Energy Technology Data Exchange (ETDEWEB)

    Sato, Shunsuke A. [Graduate School of Pure and Applied Sciences, University of Tsukuba, Tsukuba 305-8571 (Japan); Taniguchi, Yasutaka [Center for Computational Science, University of Tsukuba, Tsukuba 305-8571 (Japan); Department of Medical and General Sciences, Nihon Institute of Medical Science, 1276 Shimogawara, Moroyama-Machi, Iruma-Gun, Saitama 350-0435 (Japan); Shinohara, Yasushi [Max Planck Institute of Microstructure Physics, 06120 Halle (Germany); Yabana, Kazuhiro [Graduate School of Pure and Applied Sciences, University of Tsukuba, Tsukuba 305-8571 (Japan); Center for Computational Science, University of Tsukuba, Tsukuba 305-8571 (Japan)

    2015-12-14

    We develop methods to calculate electron dynamics in crystalline solids in real-time time-dependent density functional theory employing exchange-correlation potentials which reproduce band gap energies of dielectrics; a meta-generalized gradient approximation was proposed by Tran and Blaha [Phys. Rev. Lett. 102, 226401 (2009)] (TBm-BJ) and a hybrid functional was proposed by Heyd, Scuseria, and Ernzerhof [J. Chem. Phys. 118, 8207 (2003)] (HSE). In time evolution calculations employing the TB-mBJ potential, we have found it necessary to adopt the predictor-corrector step for a stable time evolution. We have developed a method to evaluate electronic excitation energy without referring to the energy functional which is unknown for the TB-mBJ potential. For the HSE functional, we have developed a method for the operation of the Fock-like term in Fourier space to facilitate efficient use of massive parallel computers equipped with graphic processing units. We compare electronic excitations in silicon and germanium induced by femtosecond laser pulses using the TB-mBJ, HSE, and a simple local density approximation (LDA). At low laser intensities, electronic excitations are found to be sensitive to the band gap energy: they are close to each other using TB-mBJ and HSE and are much smaller in LDA. At high laser intensities close to the damage threshold, electronic excitation energies do not differ much among the three cases.

  11. Nuclear Export Signal Masking Regulates HIV-1 Rev Trafficking and Viral RNA Nuclear Export.

    Science.gov (United States)

    Behrens, Ryan T; Aligeti, Mounavya; Pocock, Ginger M; Higgins, Christina A; Sherer, Nathan M

    2017-02-01

    HIV-1's Rev protein forms a homo-oligomeric adaptor complex linking viral RNAs to the cellular CRM1/Ran-GTP nuclear export machinery through the activity of Rev's prototypical leucine-rich nuclear export signal (NES). In this study, we used a functional fluorescently tagged Rev fusion protein as a platform to study the effects of modulating Rev NES identity, number, position, or strength on Rev subcellular trafficking, viral RNA nuclear export, and infectious virion production. We found that Rev activity was remarkably tolerant of diverse NES sequences, including supraphysiological NES (SNES) peptides that otherwise arrest CRM1 transport complexes at nuclear pores. Rev's ability to tolerate a SNES was both position and multimerization dependent, an observation consistent with a model wherein Rev self-association acts to transiently mask the NES peptide(s), thereby biasing Rev's trafficking into the nucleus. Combined imaging and functional assays also indicated that NES masking underpins Rev's well-known tendency to accumulate at the nucleolus, as well as Rev's capacity to activate optimal levels of late viral gene expression. We propose that Rev multimerization and NES masking regulates Rev's trafficking to and retention within the nucleus even prior to RNA binding. HIV-1 infects more than 34 million people worldwide causing >1 million deaths per year. Infectious virion production is activated by the essential viral Rev protein that mediates nuclear export of intron-bearing late-stage viral mRNAs. Rev's shuttling into and out of the nucleus is regulated by the antagonistic activities of both a peptide-encoded N-terminal nuclear localization signal and C-terminal nuclear export signal (NES). How Rev and related viral proteins balance strong import and export activities in order to achieve optimal levels of viral gene expression is incompletely understood. We provide evidence that multimerization provides a mechanism by which Rev transiently masks its NES peptide

  12. Administrative Circulars No. 12 A (Rev. 2) - "Education fees” and No. 12 B (Rev. 2) - “Education fees and language courses”

    CERN Multimedia

    2013-01-01

    Administrative Circulars No. 12 A (Rev. 2) entitled “Education fees” and No. 12 B (Rev. 2) entitled “Education fees and language courses”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 27 June 2013 and entering into force on 1 August 2013, are available on the intranet site of the Human Resources Department (see here).   Administrative Circular No. 12 A (Rev. 2) is applicable to Staff Members (except former “Local Staff Members”) recruited before 1st January 2007. Administrative Circular No. 12 B (Rev. 2) is applicable to Staff Members recruited on or after 1st January 2007, to Fellows, to Scientific Associates, to Guest Professors and to former “Local Staff” recruited before 1st January 2007. They cancel and replace Administrative Circulars No. 12 A (Rev. 1/Corr.) entitled "Education fees” and No. 12 B (Rev. 1/Corr.) entitled “Edu...

  13. Mutational definition of functional domains within the Rev homolog encoded by human endogenous retrovirus K.

    Science.gov (United States)

    Bogerd, H P; Wiegand, H L; Yang, J; Cullen, B R

    2000-10-01

    Nuclear export of the incompletely spliced mRNAs encoded by several complex retroviruses, including human immunodeficiency virus type 1 (HIV-1), is dependent on a virally encoded adapter protein, termed Rev in HIV-1, that directly binds both to a cis-acting viral RNA target site and to the cellular Crm1 export factor. Human endogenous retrovirus K, a family of ancient endogenous retroviruses that is not related to the exogenous retrovirus HIV-1, was recently shown to also encode a Crm1-dependent nuclear RNA export factor, termed K-Rev. Although HIV-1 Rev and K-Rev display little sequence identity, they share the ability not only to bind to Crm1 and to RNA but also to form homomultimers and shuttle between nucleus and cytoplasm. We have used mutational analysis to identify sequences in the 105-amino-acid K-Rev protein required for each of these distinct biological activities. While mutations in K-Rev that inactivate any one of these properties also blocked K-Rev-dependent nuclear RNA export, several K-Rev mutants were comparable to wild type when assayed for any of these individual activities yet nevertheless defective for RNA export. Although several nonfunctional K-Rev mutants acted as dominant negative inhibitors of K-Rev-, but not HIV-1 Rev-, dependent RNA export, these were not defined by their inability to bind to Crm1, as is seen with HIV-1 Rev. In total, this analysis suggests a functional architecture for K-Rev that is similar to, but distinct from, that described for HIV-1 Rev and raises the possibility that viral RNA export mediated by the approximately 25 million-year-old K-Rev protein may require an additional cellular cofactor that is not required for HIV-1 Rev function.

  14. UV-induced reversion of his4 frameshift mutations in rad6, rev1, and rev3 mutants of yeast.

    Science.gov (United States)

    Lawrence, C W; O'Brien, T; Bond, J

    1984-01-01

    The UV-induced reversion of two his4 frameshift alleles was much reduced in rad6 mutants of Saccharomyces cerevisiae, an observation that is consistent with the hypothesis that RAD6 function is required for the induction of all types of genetic alteration in misrepair mutagenesis. The reversion of these his4 alleles, together with two others of the same type, was also reduced in rev1 and rev3 mutant strains; in these, however, the extent of the reduction varied considerably with test allele used, in a manner analogous to the results in these strains for base repair substitution test alleles. The general features of UV-induced frameshift and substitution mutagenesis therefore appear quite similar, indicating that they may depend on related processes. If this conclusion is correct, greater attention must be given to integrating models which account for the production of nucleotide additions and deletions into those concerning misrepair mutagenesis.

  15. PyDecay/GraphPhys: A Unified Language and Storage System for Particle Decay Process Descriptions

    Energy Technology Data Exchange (ETDEWEB)

    Dunietz, Jesse N.; /MIT /SLAC

    2011-06-22

    To ease the tasks of Monte Carlo (MC) simulation and event reconstruction (i.e. inferring particle-decay events from experimental data) for long-term BaBar data preservation and analysis, the following software components have been designed: a language ('GraphPhys') for specifying decay processes, common to both simulation and data analysis, allowing arbitrary parameters on particles, decays, and entire processes; an automated visualization tool to show graphically what decays have been specified; and a searchable database storage mechanism for decay specifications. Unlike HepML, a proposed XML standard for HEP metadata, the specification language is designed not for data interchange between computer systems, but rather for direct manipulation by human beings as well as computers. The components are interoperable: the information parsed from files in the specification language can easily be rendered as an image by the visualization package, and conversion between decay representations was implemented. Several proof-of-concept command-line tools were built based on this framework. Applications include building easier and more efficient interfaces to existing analysis tools for current projects (e.g. BaBar/BESII), providing a framework for analyses in future experimental settings (e.g. LHC/SuperB), and outreach programs that involve giving students access to BaBar data and analysis tools to give them a hands-on feel for scientific analysis.

  16. Phys FilmMakers: teaching science students how to make YouTube-style videos

    Science.gov (United States)

    Coates, Rebecca L.; Kuhai, Alvina; Turlej, Laurence Z. J.; Rivlin, Tom; McKemmish, Laura K.

    2018-01-01

    Phys FilmMakers (PFM) is a new type of course in which a science expert and science communicator partner teach physics students how to make YouTube-style videos on cutting-edge scientific research within the university department. Here, we describe this new course, outline its key components and provide recommendations for others considering implementing a similar FilmMakers-style course using feedback from course tutors and students. We discuss successful and less successful teaching techniques as well as use our experience to identify areas that science students in particular often have difficulties: finding an interesting ‘hook’ for the video, imagining creative B-roll and making a succinct video by removing extraneous (though usually correct and often interesting) material. The course has two major components: workshop sessions in which students learn the key elements of film-making and independent video production where PFM students partner with senior PhD or post-doc researchers to produce a video on their research. This partnership with the department means that the videos produced serve not only as interesting ‘edutainment’ to encourage teenagers and young adults into Science, Technology, Engineering and Maths subjects, but also provide valuable outreach for the academic department.

  17. Sampling and estimation techniques for the implementation of new classification systems: the change-over from NACE Rev. 1.1 to NACE Rev. 2 in business surveys

    Directory of Open Access Journals (Sweden)

    Jan van den Brakel

    2010-09-01

    Full Text Available This paper describes some of the methodological problems encountered with the change-over from the NACE Rev. 1.1 to the NACE Rev. 2 in business statistics. Different sampling and estimation strategies are proposed to produce reliable figures for the domains under both classifications simultaneously. Furthermore several methods are described that can be used to reconstruct time series for the domains under the NACE Rev. 2.

  18. Repository Surface Design Engineering Files Report Rev 00 ICN 1

    International Nuclear Information System (INIS)

    2001-01-01

    The objective of the Repository Surface Design Engineering Files Report Supplement [herein known as the Engineering Files (EF)] is to provide the surface design data needed by the Environmental Impact Statement (EIS) contractor to prepare the EIS and evaluate options and alternatives. This document is based on the Repository Surface Design Engineering Files Report, Revision 03 (CRWMS M and O 1999f) (EF Rev 03). Where facility and system designs have been changed for the Site Recommendation (SR) effort they are described in this report. EIS information provided in this report includes the following: (1) Description of program phases; there are no changes that impact this report. (2) A description of the major design requirements and assumptions that drive the surface facilities reference design is provided herein (Section 2.2), including the surface design resulting from recommendations regarding Enhanced Design Alternative (EDA) II, as discussed in the License Application Design Section Report (CRWMS M and O 1999d), and changes to the waste stream. See Section 2, Table 2-2, for the SR waste stream. (3) The major design requirements and assumptions that drive the surface facilities reference design are by reference to EF Rev 03; there are no changes that impact this report. (4) Description of the reference design concept and existing site conditions is by reference to EF Rev 03 (including Table 4-1, which is not included in this supplement); there are no changes that impact this report. (5) Description of alternative design cases is by reference to EF Rev 03; there are no changes that impact this report. (6) Description of optional inventory modules is by reference to EF Rev 03; there are no changes that impact this report. (7) Tabular summary level engineering values (i.e., staffing, wastes, emissions, resources, and land use) for the reference design and the alternative design cases that address construction, emplacement operations, caretaker operations, and

  19. Alternative Fuels Data Center: New Hampshire Fleet Revs up With Natural Gas

    Science.gov (United States)

    New Hampshire Fleet Revs up With Natural Gas to someone by E-mail Share Alternative Fuels Data Center: New Hampshire Fleet Revs up With Natural Gas on Facebook Tweet about Alternative Fuels Data Center: New Hampshire Fleet Revs up With Natural Gas on Twitter Bookmark Alternative Fuels Data Center

  20. RNA helicase MOV10 functions as a co-factor of HIV-1 Rev to facilitate Rev/RRE-dependent nuclear export of viral mRNAs

    International Nuclear Information System (INIS)

    Huang, Feng; Zhang, Junsong; Zhang, Yijun; Geng, Guannan; Liang, Juanran; Li, Yingniang; Chen, Jingliang; Liu, Chao; Zhang, Hui

    2015-01-01

    Human immunodeficiency virus type 1 (HIV-1) exploits multiple host factors during its replication. The REV/RRE-dependent nuclear export of unspliced/partially spliced viral transcripts needs the assistance of host proteins. Recent studies have shown that MOV10 overexpression inhibited HIV-1 replication at various steps. However, the endogenous MOV10 was required in certain step(s) of HIV-1 replication. In this report, we found that MOV10 potently enhances the nuclear export of viral mRNAs and subsequently increases the expression of Gag protein and other late products through affecting the Rev/RRE axis. The co-immunoprecipitation analysis indicated that MOV10 interacts with Rev in an RNA-independent manner. The DEAG-box of MOV10 was required for the enhancement of Rev/RRE-dependent nuclear export and the DEAG-box mutant showed a dominant-negative activity. Our data propose that HIV-1 utilizes the anti-viral factor MOV10 to function as a co-factor of Rev and demonstrate the complicated effects of MOV10 on HIV-1 life cycle. - Highlights: • MOV10 can function as a co-factor of HIV-1 Rev. • MOV10 facilitates Rev/RRE-dependent transport of viral mRNAs. • MOV10 interacts with Rev in an RNA-independent manner. • The DEAG-box of MOV10 is required for the enhancement of Rev/RRE-dependent export.

  1. RNA helicase MOV10 functions as a co-factor of HIV-1 Rev to facilitate Rev/RRE-dependent nuclear export of viral mRNAs

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Feng; Zhang, Junsong; Zhang, Yijun; Geng, Guannan; Liang, Juanran; Li, Yingniang; Chen, Jingliang [Institute of Human Virology, Zhongshan School of Medicine, Sun Yat-sen University, Guangzhou 510080 (China); Key Laboratory of Tropical Disease Control of Ministry of Education, Zhongshan School of Medicine, Sun Yat-sen University, Guangzhou 510080 (China); Liu, Chao, E-mail: liuchao9@mail.sysu.edu.cn [Institute of Human Virology, Zhongshan School of Medicine, Sun Yat-sen University, Guangzhou 510080 (China); Key Laboratory of Tropical Disease Control of Ministry of Education, Zhongshan School of Medicine, Sun Yat-sen University, Guangzhou 510080 (China); Zhang, Hui [Institute of Human Virology, Zhongshan School of Medicine, Sun Yat-sen University, Guangzhou 510080 (China); Key Laboratory of Tropical Disease Control of Ministry of Education, Zhongshan School of Medicine, Sun Yat-sen University, Guangzhou 510080 (China)

    2015-12-15

    Human immunodeficiency virus type 1 (HIV-1) exploits multiple host factors during its replication. The REV/RRE-dependent nuclear export of unspliced/partially spliced viral transcripts needs the assistance of host proteins. Recent studies have shown that MOV10 overexpression inhibited HIV-1 replication at various steps. However, the endogenous MOV10 was required in certain step(s) of HIV-1 replication. In this report, we found that MOV10 potently enhances the nuclear export of viral mRNAs and subsequently increases the expression of Gag protein and other late products through affecting the Rev/RRE axis. The co-immunoprecipitation analysis indicated that MOV10 interacts with Rev in an RNA-independent manner. The DEAG-box of MOV10 was required for the enhancement of Rev/RRE-dependent nuclear export and the DEAG-box mutant showed a dominant-negative activity. Our data propose that HIV-1 utilizes the anti-viral factor MOV10 to function as a co-factor of Rev and demonstrate the complicated effects of MOV10 on HIV-1 life cycle. - Highlights: • MOV10 can function as a co-factor of HIV-1 Rev. • MOV10 facilitates Rev/RRE-dependent transport of viral mRNAs. • MOV10 interacts with Rev in an RNA-independent manner. • The DEAG-box of MOV10 is required for the enhancement of Rev/RRE-dependent export.

  2. PhysTrack’: a Matlab based environment for video tracking of kinematics in the physics laboratory

    Science.gov (United States)

    Umar Hassan, Muhammad; Sabieh Anwar, Muhammad

    2017-07-01

    In the past two decades, several computer software tools have been developed to investigate the motion of moving bodies in physics laboratories. In this article we report a Matlab based video tracking library, PhysTrack, primarily designed to investigate kinematics. We compare PhysTrack with other commonly available video tracking tools and outline its salient features. The general methodology of the whole video tracking process is described with a step by step explanation of several functionalities. Furthermore, results of some real physics experiments are also provided to demonstrate the working of the automated video tracking, data extraction, data analysis and presentation tools that come with this development environment. We believe that PhysTrack will be valuable for the large community of physics teachers and students already employing Matlab.

  3. Comment on “Temperature dependence of atomic vibrations in mono-layer graphene” [J. Appl. Phys. 118, 074302 (2015)

    International Nuclear Information System (INIS)

    Susi, T.; Kotakoski, J.

    2016-01-01

    In an interesting recent study [Allen et al., J. Appl. Phys. 118, 074302 (2015)] (see also their Erratum [Allen et al., J. Appl. Phys. 118, 159902 (2015)]), Allen and co-workers measured the mean square amplitudes of graphene lattice vibrations between 100 and 1300 K and used a simplified theoretical approximation for the acoustic phonon modes to evaluate the maximum phonon wavelengths supported by the lattice. By fitting their data using the smallest wave-vector as the fitting parameter, they found this to be significantly smaller than the physical size of the graphene crystallites

  4. Wind Farm Wake: The Horns Rev Photo Case

    DEFF Research Database (Denmark)

    Hasager, Charlotte Bay; Rasmussen, Leif; Peña, Alfredo

    2013-01-01

    The aim of the paper is to examine the nowadays well-known wind farm wake photographs taken on 12 February 2008 at the offshore Horns Rev 1 wind farm. The meteorological conditions are described from observations from several satellite sensors quantifying clouds, surface wind vectors and sea surf...... in the wake regions with relatively high axial velocities and high turbulent kinetic energy. The wind speed is near cut-in and most turbines produce very little power. The rotational pattern of spiraling bands produces the large-scale structure of the wake fog....

  5. Mapping the binding interface between an HIV-1 inhibiting intrabody and the viral protein Rev.

    Directory of Open Access Journals (Sweden)

    Thomas Vercruysse

    Full Text Available HIV-1 Rev is the key protein in the nucleocytoplasmic export and expression of the late viral mRNAs. An important aspect for its function is its ability to multimerize on these mRNAs. We have recently identified a llama single-domain antibody (Nb190 as the first inhibitor targeting the Rev multimerization function in cells. This nanobody is a potent intracellular antibody that efficiently inhibits HIV-1 viral production. In order to gain insight into the Nb190-Rev interaction interface, we performed mutational and docking studies to map the interface between the nanobody paratope and the Rev epitope. Alanine mutants of the hyper-variable domains of Nb190 and the Rev multimerization domains were evaluated in different assays measuring Nb190-Rev interaction or viral production. Seven residues within Nb190 and five Rev residues are demonstrated to be crucial for epitope recognition. These experimental data were used to perform docking experiments and map the Nb190-Rev structural interface. This Nb190-Rev interaction model can guide further studies of the Nb190 effect on HIV-1 Rev function and could serve as starting point for the rational development of smaller entities binding to the Nb190 epitope, aimed at interfering with protein-protein interactions of the Rev N-terminal domain.

  6. Laser spectroscopic studies of the pure rotational U0(0) and W0(0) transitions of solid parahydrogen

    International Nuclear Information System (INIS)

    Chan, M.; Lee, S.S.; Okumura, M.; Oka, T.

    1991-01-01

    High resolution spectrum of multipole-induced transitions of solid parahydrogen was recorded using diode and difference frequency laser spectroscopy. The J=4 left-arrow 0 pure rotational U 0 (0) transition observed in the diode spectrum agrees well in frequency with the value reported by Balasubramanian et al. [Phys. Rev. Lett. 47, 1277 (1981)] but we observed a spectral width smaller by about a factor of 4. The J=6 left-arrow 0 W 0 (0) transition was observed to be exceedingly sharp, with a width of ∼70 MHz, using a difference frequency spectrometer with tone-burst modulation. This transition is composed of three components with varying relative intensity depending upon the direction of polarization of laser radiation. These components were interpreted as the splitting of the M levels in the J=6 state due to crystal field interactions. In addition, a new broad feature was found at 2452.4 cm -1 in the low resolution Fourier-transform infrared (FTIR) spectrum of solid hydrogen and was assigned to be the phonon branch W R (0) transition of the W 0 (0) line. The selection rules, crystal field splitting of J=4 and J=6 rotons, and the measured linewidth based on these observations are discussed

  7. Publication Of Administrative Circulars: No. 4 (Rev. 4) – Unemployment Insurance Scheme No. 30 (Rev. 2) – Financial Benefits on Taking Up Appointment and on Termination of Contract

    CERN Multimedia

    HR Department

    2008-01-01

    Administrative Circular No. 4 (Rev. 4) – Unemployment insurance scheme Administrative Circular No. 4 (Rev. 4) – "Unemployment insurance scheme", approved following discussion in the Standing Concertation Committee meetings of 28 August 2007 and 27 February 2008, is now available on the intranet site of the Human Resources Department. It cancels and replaces Administrative Circular No. 4 (Rev. 3) – "Unemployment insurance" of October 1993. Copies will shortly be available in Departmental secretariats. Human Resources Department Tel. 78003 Administrative Circular No. 30 (Rev. 2) – Financial benefits on taking up appointment and termination of contract Administrative Circular No. 30 (Rev. 2) – "Financial benefits on taking up appointment and termination of contract", approved following discussion in the Standing Concertation Committee meetings of 28 August 2007 and 27 February 2008, is now available on the intranet site of the Human Resources De...

  8. Publication Of Administrative Circulars: No. 4 (Rev. 4) – Unemployment Insurance Scheme No. 30 (Rev. 2) – Financial Benefits on Taking Up Appointment and on Termination of Contract

    CERN Document Server

    HR Department

    2008-01-01

    Administrative Circular No. 4 (Rev. 4) – Unemployment insurance scheme Administrative Circular No. 4 (Rev. 4) – "Unemployment insurance scheme", approved following discussion at the Standing Concertation Committee meetings of 28 August 2007 and 27 February 2008, is now available on the intranet site of the Human Resources Department. It cancels and replaces Administrative Circular No. 4 (Rev. 3) – "Unemployment insurance" of October 1993. Copies will shortly be available in Departmental secretariats. Human Resources Department Tel. 78003 Administrative Circular No. 30 (Rev. 2) – Financial benefits on taking up appointment and termination of contract Administrative Circular No. 30 (Rev. 2) – "Financial benefits on taking up appointment and termination of contract", approved following discussion at the Standing Concertation Committee meetings of 28 August 2007 and 27 February 2008, is now available on the intranet site of the Human Resources De...

  9. 12MW Horns Rev experiment[Wind farm

    Energy Technology Data Exchange (ETDEWEB)

    Hasager, C.B.; Pena, A; Mikkelsen, T.; Courtney, M.; Antoniou, I.; Gryning, S.-E.; Hansen, P. [Risoe National Lab., DTU, Wind Energy Dept. (Denmark); Soerensen, P.B. [DONG Energy (Denmark)

    2007-10-15

    The 12MW project with the full title '12 MW wind turbines: the scientific basis for their operation at 70 to 270 m height offshore' has the goal to experimentally investigate the wind and turbulence characteristics between 70 and 270 m above sea level and thereby establish the scientific basis relevant for the next generation of huge 12 MW wind turbines operating offshore. The report describes the experimental campaign at the Horns Rev offshore wind farm at which observations from Doppler Laser LIDAR and SODAR were collected from 3 May to 24 October 2006. The challenges for mounting and operating the instruments on the transformer platform at Horns Rev were overcome by a close collaboration between DONG energy and Risoe National Laboratory DTU. The site is presented. In particular, three tall offshore meteorological masts, up to 70 m tall, provided a useful source of meteorological data for comparison to the remotely sensed wind and turbulence observations. The comparison showed high correlation. The LIDAR and SODAR wind and turbulence observations were collected far beyond the height of the masts (up to 160 m above sea level) and the extended profiles were compared to the logarithmic wind profile. Further studies on this part of the work are on-going. Technical detail on LIDAR and SODAR are provided as well as theoretical work on turbulence and atmospheric boundary layer flow. Selected results from the experimental campaign are reported. (au)

  10. Wind Farm Wake: The 2016 Horns Rev Photo Case

    Directory of Open Access Journals (Sweden)

    Charlotte Bay Hasager

    2017-03-01

    Full Text Available Offshore wind farm wakes were observed and photographed in foggy conditions at Horns Rev 2 on 25 January 2016 at 12:45 UTC. These new images show highly contrasting conditions regarding the wind speed, turbulence intensity, atmospheric stability, weather conditions and wind farm wake development as compared to the Horns Rev 1 photographs from 12 February 2008. The paper examines the atmospheric conditions from satellite images, radiosondes, lidar and wind turbine data and compares the observations to results from atmospheric meso-scale modelling and large eddy simulation. Key findings are that a humid and warm air mass was advected from the southwest over cold sea and the dew-point temperature was such that cold-water advection fog formed in a shallow layer. The flow was stably stratified and the freestream wind speed was 13 m/s at hub height, which means that most turbines produced at or near rated power. The wind direction was southwesterly and long, narrow wakes persisted several rotor diameters downwind of the wind turbines. Eventually mixing of warm air from aloft dispersed the fog in the far wake region of the wind farm.

  11. rev piyasaları ve vergilendirilmesi

    OpenAIRE

    İşler, İsmail; Utku, Mehmet

    2015-01-01

    rev piyasaları kavramı, vadeli işlem sözleşmeleri (forward, futures), opsiyon sözleşmeleri, swap sözleşmeleri ve aracı kuruluş varantları işlemlerinin tamamını içermektedir. Bu tür işlemler vadeli işlemlerdir. Vadeli işlemlerin ortak özelliği, ilerideki bir tarihte teslimatı yapılmak üzere herhangi bir malın veya finansal aracın, bugünden alım satımının yapılmasıdır. Bu çalışmada türev araçların tanımları ve vergilendirilmeleri örneklerle açıklanacaktır. The term derivatives market invol...

  12. Comment on ``On the Crooks fluctuation theorem and the Jarzynski equality'' [J. Chem. Phys. 129, 091101 (2008)

    Science.gov (United States)

    Adib, Artur B.

    2009-06-01

    It has recently been argued that a self-consistency condition involving the Jarzynski equality (JE) and the Crooks fluctuation theorem (CFT) is violated for a simple Brownian process [L. Y. Chen, J. Chem. Phys.129, 091101 (2008)]. This note adopts the definitions in the original formulation of the JE and CFT and demonstrates the contrary.

  13. Comment on : "A novel approach for solving the Fisher equation using Exp-function method" [Phys. Lett. A 372 3836

    NARCIS (Netherlands)

    Kudryashov, Nikolai A.

    2009-01-01

    Using Exp-function method Ozis and Koroglu [T. Ozis, C. Koroglu, Phys. Lett. A 372 (2008) 3836] have found exact "solutions" of the Fisher equation. In this comment we demonstrate that all these solutions do not satisfy the Fisher equation. The efficiency of application of Exp-function method to

  14. Comments on ''theory of dissipative density-gradient-driven turbulence in the tokamak edge'' [Phys. Fluids 28, 1419 (1985)

    International Nuclear Information System (INIS)

    Krommes, J.A.

    1985-11-01

    The author critiques the model of tokamak edge turbulence by P.W. Terry and P.H. Diamond (Phys. Fluids 28, 1419, 1985). The critique includes a discussion of the physical basis, consistency and quantitative accuracy of the Terry-Diamond model. 19 refs

  15. The analysis of senior high school students' physics HOTS in Bantul District measured using PhysReMChoTHOTS

    Science.gov (United States)

    Istiyono, Edi

    2017-08-01

    The purpose of this research is to describe the results of higher order thinking skills in physics (PhysHOTS) measurement including: (1) percentage of PhysHOTS level and (2) percentage of the domination of response in the category of students in each analyzing, evaluating, and creating skill. There were 404 10th grade students in Bantul District as the respondents of this research. The instrument used for measurement was PhysReMChoTHOTS. It was divided into two sets consisting of 44 items and including 8 anchor items stated valid by a Physicist, Physics Education Expert, and Physics Education Measurement Expert. The instrument was fit to PCM. The reliability coefficient of this test is 0.71, while the difficulty index of the items ranges from -0.61 to 0.51. The results of the measurement show that: (1) The percentage of each category of PhysHOTS for the 10th grade students in Bantul District for the very low, low, medium, high, and very high category is 4.75 %, 40.30 %, 33.45 %, 19.50 %, and 2.00 %, respectively; and (2) The order in analyzing skills, starts from the weakest, is attributing, differentiating and organizing. The order in evaluating skills, starts from the weakest, is critiquing and checking. Meanwhile, the order in creating skills, starts from the weakest, is producing, planning, and generating.

  16. Strength, anisotropy, and preferred orientation of solid argon at high pressures

    Science.gov (United States)

    Mao, Ho-kwang; Badro, James; Shu, Jinfu; Hemley, Russell J.; Singh, Anil K.

    2006-06-01

    The elasticity and plasticity of materials at high pressure are of great importance for the fundamental insight they provide on bonding properties in dense matter and for applications ranging from geophysics to materials technology. We studied pressure-solidified argon with a boron-epoxy-beryllium composite gasket in a diamond anvil cell (DAC). Employing monochromatic synchrotron x-radiation and imaging plates in a radial diffraction geometry (Singh et al 1998 Phys. Rev. Lett. 80 2157; Mao et al 1998 Nature 396 741), we observed low strength in solid argon below 20 GPa, but the strength increases drastically with applied pressure, such that at 55 GPa, the shear strength exceeded 2.7 GPa. The elastic anisotropy at 55 GPa was four times higher than the extrapolated value from 30 GPa. Extensive (111) slip develops under uniaxial compression, as manifested by the preferred crystallographic orientation of (220) in the compression direction. These macroscopic properties reflect basic changes in van der Waals bondings under ultrahigh pressures.

  17. Strength, anisotropy, and preferred orientation of solid argon at high pressures

    International Nuclear Information System (INIS)

    Mao, Ho-kwang; Badro, James; Shu, Jinfu; Hemley, Russell J; Singh, Anil K

    2006-01-01

    The elasticity and plasticity of materials at high pressure are of great importance for the fundamental insight they provide on bonding properties in dense matter and for applications ranging from geophysics to materials technology. We studied pressure-solidified argon with a boron-epoxy-beryllium composite gasket in a diamond anvil cell (DAC). Employing monochromatic synchrotron x-radiation and imaging plates in a radial diffraction geometry (Singh et al 1998 Phys. Rev. Lett. 80 2157; Mao et al 1998 Nature 396 741), we observed low strength in solid argon below 20 GPa, but the strength increases drastically with applied pressure, such that at 55 GPa, the shear strength exceeded 2.7 GPa. The elastic anisotropy at 55 GPa was four times higher than the extrapolated value from 30 GPa. Extensive (111) slip develops under uniaxial compression, as manifested by the preferred crystallographic orientation of (220) in the compression direction. These macroscopic properties reflect basic changes in van der Waals bondings under ultrahigh pressures

  18. A new compact solid-state neutral particle analyser at ASDEX Upgrade: Setup and physics modeling

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, P. A.; Blank, H.; Geiger, B.; Mank, K.; Martinov, S.; Ryter, F.; Weiland, M.; Weller, A. [Max-Planck-Institut für Plasmaphysik, Garching (Germany)

    2015-07-15

    At ASDEX Upgrade (AUG), a new compact solid-state detector has been installed to measure the energy spectrum of fast neutrals based on the principle described by Shinohara et al. [Rev. Sci. Instrum. 75, 3640 (2004)]. The diagnostic relies on the usual charge exchange of supra-thermal fast-ions with neutrals in the plasma. Therefore, the measured energy spectra directly correspond to those of confined fast-ions with a pitch angle defined by the line of sight of the detector. Experiments in AUG showed the good signal to noise characteristics of the detector. It is energy calibrated and can measure energies of 40-200 keV with count rates of up to 140 kcps. The detector has an active view on one of the heating beams. The heating beam increases the neutral density locally; thereby, information about the central fast-ion velocity distribution is obtained. The measured fluxes are modeled with a newly developed module for the 3D Monte Carlo code F90FIDASIM [Geiger et al., Plasma Phys. Controlled Fusion 53, 65010 (2011)]. The modeling allows to distinguish between the active (beam) and passive contributions to the signal. Thereby, the birth profile of the measured fast neutrals can be reconstructed. This model reproduces the measured energy spectra with good accuracy when the passive contribution is taken into account.

  19. Elastic properties of dense solid phases of hard cyclic pentamers and heptamers in two dimensions.

    Science.gov (United States)

    Wojciechowski, K W; Tretiakov, K V; Kowalik, M

    2003-03-01

    Systems of model planar, nonconvex, hard-body "molecules" of fivefold and sevenfold symmetry axes are studied by constant pressure Monte Carlo simulations with variable shape of the periodic box. The molecules, referred to as pentamers (heptamers), are composed of five (seven) identical hard disks "atoms" with centers forming regular pentagons (heptagons) of sides equal to the disk diameter. The elastic compliances of defect-free solid phases are computed by analysis of strain fluctuations and the reference (equilibrium) state is determined within the same run in which the elastic properties are computed. Results obtained by using pseudorandom number generators based on the idea proposed by Holian and co-workers [Holian et al., Phys. Rev. E 50, 1607 (1994)] are in good agreement with the results generated by DRAND48. It is shown that singular behavior of the elastic constants near close packing is in agreement with the free volume approximation; the coefficients of the leading singularities are estimated. The simulations prove that the highest density structures of heptamers (in which the molecules cannot rotate) are auxetic, i.e., show negative Poisson ratios.

  20. Elastic properties of dense solid phases of hard cyclic pentamers and heptamers in two dimensions

    International Nuclear Information System (INIS)

    Wojciechowski, K.W.; Tretiakov, K.V.; Kowalik, M.

    2003-02-01

    Systems of model plannar, non-convex, hard-body 'molecules' of five-fold and seven-fold symmetry axes are studied by constant pressure Monte Carlo simulations with variable shape of the periodic box. The molecules, referred to as pentamers (heptamers) are composed of five (seven) identical hard discs-'atoms' with centers forming regular pentagons (heptagons) of sides equal to the disc diameter. The elastic compliances of defect-free solid phases are computed by analysis of strain fluctuations and the reference (equilibrium) state is determined within the same run in which the elastic properties are computed. Results obtained by using pseudo-random number generators based on the idea proposed by Holian and co-workers [B. L. Holian et al., Phys. Rev. E50, 1607 (1994)] are in good agreement with the results generated by DRAND48. It is shown that singular behavior of the elastic constants near close packing is in agreement with the free volume approximation; the coefficients of the leading singularities are estimated. The simulations prove that the highest density structures of heptamers (in which the molecules cannot rotate) are auxetic, i.e. show negative Poisson ratios. (author)

  1. Spectroscopy of lithium atoms sublimated from isolation matrix of solid Ne.

    Science.gov (United States)

    Sacramento, R L; Scudeller, L A; Lambo, R; Crivelli, P; Cesar, C L

    2011-10-07

    We have studied, via laser absorption spectroscopy, the velocity distribution of (7)Li atoms released from a solid neon matrix at cryogenic temperatures. The Li atoms are implanted into the Ne matrix by laser ablation of a solid Li precursor. A heat pulse is then applied to the sapphire substrate sublimating the matrix together with the isolated atoms at around 12 K. We find interesting differences in the velocity distribution of the released Li atoms from the model developed for our previous experiment with Cr [R. Lambo, C. C. Rodegheri, D. M. Silveira, and C. L. Cesar, Phys. Rev. A 76, 061401(R) (2007)]. This may be due to the sublimation regime, which is at much lower flux for the Li experiment than for the Cr experiment, as well as to the different collisional cross sections between those species to the Ne gas. We find a drift velocity compatible with Li being thermally sublimated at 11-13 K, while the velocity dispersion around this drift velocity is low, around 5-7 K. With a slow sublimation of the matrix we can determine the penetration depth of the laser ablated Li atoms into the Ne matrix, an important information that is not usually available in most matrix isolation spectroscopy setups. The present results with Li, together with the previous results with Cr suggest this to be a general technique for obtaining cryogenic atoms, for spectroscopic studies, as well as for trap loading. The release of the isolated atoms is also a useful tool to study and confirm details of the matrix isolated atoms which are masked or poorly understood in the solid. © 2011 American Institute of Physics

  2. Two- and four-point Kapitza resistance between harmonic solids

    NARCIS (Netherlands)

    Maassen van den Brink, A.; Dekker, H.

    1996-01-01

    The calculation of the Kapitza boundary resistance between dissimilar harmonic solids has since long (Little [Can. J. Phys. 37 (1959) 334]) suffered from a paradox: this resistance erroneously tends to a finite value in the limit of identical solids. We resolve this paradox by calculating

  3. Probing solids and liquids

    International Nuclear Information System (INIS)

    Martin, D.H.

    1977-01-01

    The wide application of scattering experiments in the study of the structures of solids and liquids is surveyed. Part 1 of the review (Martin. Contemp. Phys.;vol. 18, No. 1: Jan. 1977:pp. 81-98) showed how the angular distribution of a scattered beam of photons or neutrons is related by Fourier transform to the space and time-dependent distributions of electrons and nuclei in the scattering target. The use of x-rays and of neutrons in determining time-averaged density distributions was examined. In this part the time-dependent aspects of the distributions for solids and liquids, including helium, are discussed. The dynamical distributions of magnetism (or angular momentum) density are considered, and the present limitations and future possibilities of scattering experiments are examined. (U.K.)

  4. Applications of the INFCIRC225/rev5 to the national physical protection regime

    International Nuclear Information System (INIS)

    Kim, Jae Gwang

    2011-01-01

    The IAEA's first effort for playing a key role in physical protection of nuclear material and facilities resulted in the publication of 'Recommendations for the physical protection of nuclear material' in 1972. These recommendations were revised by a group of experts in co-operation with the IAEA Secretariat and the revised version was published in 1975 in INFCIRC/225. The document was subsequently revised in 1977(rev.1), 1989(rev.2), in 1993(rev.3) and 1998(rev4). The Physical Protection regime in ROK has been established on the basis of INFCIRC225 rev4 since 2004 IAEA recently published The INFCIRC 225 rev5 through the 2 years expert consultations. The publication recommended 12 nuclear security fundamentals and requirements of physical protection of nuclear material and nuclear facility to the member states. This paper suggests the several applications to the national physical protection system from the 12 fundamentals and the requirements

  5. Publication of administrative circular No. 26 (Rev. 8) – Recognition of merit

    CERN Multimedia

    HR Department

    2008-01-01

    Administrative Circular No. 26 (Rev. 8) – Recognition of merit Administrative Circular No. 26 (Rev. 8) – "Recognition of merit", approved by the Standing Concertation Committee at its meeting on 3 September 2008, is now available on the intranet site of the Human Resources Department. It cancels and replaces Administrative Circular No. 26 (Rev. 7) – "Recognition of merit of staff members" of May 2007. Paper copies will shortly be available in Departmental secretariats. Human Resources Department Tel. 78003

  6. Publication of administrative circular No. 26 (Rev. 8) – Recognition of merit

    CERN Multimedia

    HR Department

    2008-01-01

    Administrative Circular No. 26 (Rev. 8) – Recognition of merit Administrative Circular No. 26 (Rev. 8) – "Recognition of merit", approved by the Standing Concertation Committee meeting on 3 September 2008, is now available on the intranet site of the Human Resources Department. It cancels and replaces Administrative Circular No. 26 (Rev. 7) – "Recognition of merit of staff members" of May 2007. Paper copies will shortly be available in Departmental secretariats. Human Resources Department Tel. 78003

  7. Dosimetric characterization of model Cs-1 Rev2 cesium-131 brachytherapy source in water phantoms and human tissues with MCNP5 Monte Carlo simulation

    International Nuclear Information System (INIS)

    Wang Jianhua; Zhang Hualin

    2008-01-01

    A recently developed alternative brachytherapy seed, Cs-1 Rev2 cesium-131, has begun to be used in clinical practice. The dosimetric characteristics of this source in various media, particularly in human tissues, have not been fully evaluated. The aim of this study was to calculate the dosimetric parameters for the Cs-1 Rev2 cesium-131 seed following the recommendations of the AAPM TG-43U1 report [Rivard et al., Med. Phys. 31, 633-674 (2004)] for new sources in brachytherapy applications. Dose rate constants, radial dose functions, and anisotropy functions of the source in water, Virtual Water, and relevant human soft tissues were calculated using MCNP5 Monte Carlo simulations following the TG-43U1 formalism. The results yielded dose rate constants of 1.048, 1.024, 1.041, and 1.044 cGy h -1 U -1 in water, Virtual Water, muscle, and prostate tissue, respectively. The conversion factor for this new source between water and Virtual Water was 1.02, between muscle and water was 1.006, and between prostate and water was 1.004. The authors' calculation of anisotropy functions in a Virtual Water phantom agreed closely with Murphy's measurements [Murphy et al., Med. Phys. 31, 1529-1538 (2004)]. Our calculations of the radial dose function in water and Virtual Water have good agreement with those in previous experimental and Monte Carlo studies. The TG-43U1 parameters for clinical applications in water, muscle, and prostate tissue are presented in this work

  8. Droplet motion in one-component fluids on solid substrates with wettability gradients

    KAUST Repository

    Xu, Xinpeng

    2012-05-11

    Droplet motion on solid substrates has been widely studied not only because of its importance in fundamental research but also because of its promising potentials in droplet-based devices developed for various applications in chemistry, biology, and industry. In this paper, we investigate the motion of an evaporating droplet in one-component fluids on a solid substrate with a wettability gradient. As is well known, there are two major difficulties in the continuum description of fluid flows and heat fluxes near the contact line of droplets on solid substrates, namely, the hydrodynamic (stress) singularity and thermal singularity. To model the droplet motion, we use the dynamic van der Waals theory [Phys. Rev. E 75, 036304 (2007)] for the hydrodynamic equations in the bulk region, supplemented with the boundary conditions at the fluid-solid interface. In this continuum hydrodynamic model, various physical processes involved in the droplet motion can be taken into account simultaneously, e.g., phase transitions (evaporation or condensation), capillary flows, fluid velocity slip, and substrate cooling or heating. Due to the use of the phase field method (diffuse interface method), the hydrodynamic and thermal singularities are resolved automatically. Furthermore, in the dynamic van der Waals theory, the evaporation or condensation rate at the liquid-gas interface is an outcome of the calculation rather than a prerequisite as in most of the other models proposed for evaporating droplets. Numerical results show that the droplet migrates in the direction of increasing wettability on the solid substrates. The migration velocity of the droplet is found to be proportional to the wettability gradients as predicted by Brochard [Langmuir 5, 432 (1989)]. The proportionality coefficient is found to be linearly dependent on the ratio of slip length to initial droplet radius. These results indicate that the steady migration of the droplets results from the balance between the

  9. Droplet motion in one-component fluids on solid substrates with wettability gradients

    KAUST Repository

    Xu, Xinpeng; Qian, Tiezheng

    2012-01-01

    Droplet motion on solid substrates has been widely studied not only because of its importance in fundamental research but also because of its promising potentials in droplet-based devices developed for various applications in chemistry, biology, and industry. In this paper, we investigate the motion of an evaporating droplet in one-component fluids on a solid substrate with a wettability gradient. As is well known, there are two major difficulties in the continuum description of fluid flows and heat fluxes near the contact line of droplets on solid substrates, namely, the hydrodynamic (stress) singularity and thermal singularity. To model the droplet motion, we use the dynamic van der Waals theory [Phys. Rev. E 75, 036304 (2007)] for the hydrodynamic equations in the bulk region, supplemented with the boundary conditions at the fluid-solid interface. In this continuum hydrodynamic model, various physical processes involved in the droplet motion can be taken into account simultaneously, e.g., phase transitions (evaporation or condensation), capillary flows, fluid velocity slip, and substrate cooling or heating. Due to the use of the phase field method (diffuse interface method), the hydrodynamic and thermal singularities are resolved automatically. Furthermore, in the dynamic van der Waals theory, the evaporation or condensation rate at the liquid-gas interface is an outcome of the calculation rather than a prerequisite as in most of the other models proposed for evaporating droplets. Numerical results show that the droplet migrates in the direction of increasing wettability on the solid substrates. The migration velocity of the droplet is found to be proportional to the wettability gradients as predicted by Brochard [Langmuir 5, 432 (1989)]. The proportionality coefficient is found to be linearly dependent on the ratio of slip length to initial droplet radius. These results indicate that the steady migration of the droplets results from the balance between the

  10. REV7, a new gene concerned with UV mutagenesis in yeast

    International Nuclear Information System (INIS)

    Lawrence, C.W.; Das, G.; Christensen, R.B.

    1985-01-01

    Three allelic mutations of a new yeast gene, which we have named REV7, have been isolated by testing 313 methyl methane sulfonate sensitive mutants for UV-induced reversion of a lys2 allele. Rev7 mutants are markedly deficient with respect to UV-induced reversion of lys2, are slightly sensitive to UV and appear to be in the RAD6 epistasis group for UV survival. Rev7-1, which is probably an amber mutation, does not appear to affect sporulation in homozygous diploids. The REV7 gene is located about 12 cM distal to HIS5 on chromosome IX. (orig.)

  11. REV7, a new gene concerned with UV mutagenesis in yeast

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence, C.W.; Das, G.; Christensen, R.B.

    1985-06-26

    Three allelic mutations of a new yeast gene, which we have named REV7, have been isolated by testing 313 methyl methane sulfonate sensitive mutants for UV-induced reversion of a lys2 allele. REV7 mutants are markedly deficient with respect to UV-induced reversion of lys2, are slightly sensitive to UV and appear to be in the RAD6 epistasis group for UV survival. Rev7-1, which is probably an amber mutation, does not appear to affect sporulation in homozygous diploids. The REV7 gene is located about 12 cM distal to HIS5 on chromosome IX.

  12. Response to 'Comment on 'Ultrafast electron optics: Propagation dynamics of femtosecond electron packets'' [J. Appl. Phys. 94, 803 (2003)

    International Nuclear Information System (INIS)

    Siwick, Bradley J.; Dwyer, Jason R.; Jordan, Robert E.; Miller, R. J. Dwayne

    2003-01-01

    In this reply, we address the main issues raised by Qian et al. regarding our recent article [J. Appl. Phys. 92, 1643 (2002)]. In particular, we reiterate the approximations used in the development of the mean-field model and demonstrate how the form used for the on-axis potential is applicable to the study of femtosecond electron packet propagation and is not in need of correction. We also repeat our assertion that the one-dimensional (1-D) fluid model developed by Qian et al. [J. Appl. Phys. 91, 462 (2002)] overestimates space-charge-induced pulse broadening and is in qualitative disagreement with femtosecond electron packet propagation dynamics. The key differences between the mean-field and 1-D fluid model are discussed and their range of applicability is clarified

  13. Comment on “Maxwell's equations and electromagnetic Lagrangian density in fractional form” [J. Math. Phys. 53, 033505 (2012)

    International Nuclear Information System (INIS)

    Rabei, Eqab M.; Al-Jamel, A.; Widyan, H.; Baleanu, D.

    2014-01-01

    In a recent paper, Jaradat et al. [J. Math. Phys. 53, 033505 (2012)] have presented the fractional form of the electromagnetic Lagrangian density within the Riemann-Liouville fractional derivative. They claimed that the Agrawal procedure [O. P. Agrawal, J. Math. Anal. Appl. 272, 368 (2002)] is used to obtain Maxwell's equations in the fractional form, and the Hamilton's equations of motion together with the conserved quantities obtained from fractional Noether's theorem are reported. In this comment, we draw the attention that there are some serious steps of the procedure used in their work are not applicable even though their final results are correct. Their work should have been done based on a formulation as reported by Baleanu and Muslih [Phys. Scr. 72, 119 (2005)

  14. Reply to ''Comment on 'Transmit versus receive gains for microwave dish antennas' [J. Appl. Phys. 54, 3528 (1983)]''

    International Nuclear Information System (INIS)

    Richter, J.L.

    1985-01-01

    A. W. Love points out three alleged errors in our paper [J. Appl. Phys. 54, 3528 (1983)]. We agree that he is correct with regard to the second and third issues, but the first and perhaps most important point is correct. This regards the inequality of transmit and receive patterns of microwave antennas. The standard proof of equality of the patterns, cited by A. W. Love, is shown to be incorrect

  15. Hydrodynamic boundary conditions for one-component liquid-gas flows on non-isothermal solid substrates

    KAUST Repository

    Xu, Xinpeng

    2012-01-01

    Recently, liquid-gas flows related to droplets, bubbles, and thin films on solid surfaces with thermal and wettability gradients have attracted widespread attention because of the many physical processes involved and their promising potential applications in biology, chemistry, and industry. Various new physical effects have been discovered at fluid-solid interfaces by experiments and molecular dynamics simulations, e.g., fluid velocity slip, temperature slip (Kapitza resistance), mechanical-thermal cross coupling, etc. There have been various models and theories proposed to explain these experimental and numerical observations. However, to the best of our knowledge,a continuum hydrodynamic model capable of predicting the temperature and velocity profiles of liquid-gas flows on non-isothermal, heterogeneous solid substrates is still absent. The purpose of this work is to construct a continuum model for simulating the liquid-gas flows on solid surfaces that are flat and rigid, and may involve wettability gradients and thermal gradients. This model is able to describe fluid velocity slip, temperature slip, and mechanical-thermal coupling that may occur at fluid-solid interfaces. For this purpose, we first employ the diffuse interface modeling to formulate the hydrodynamic equations for one-component liquid-gas flows in the bulk region. This reproduces the dynamic van der Waals theory of Onuki [Phys. Rev. Lett., 94: 054501, 2005]. We then extendWaldmann\\'s method [Z. Naturforsch. A, 22: 1269-1280, 1967] to formulate the boundary conditions at the fluid-solid interface that match the hydrodynamic equations in the bulk. The effects of the solid surface curvature are also briefly discussed in the appendix. The guiding principles of our model derivation are the conservation laws and the positive definiteness of entropy production together with the Onsager reciprocal relation. The derived model is self-consistent in the sense that the boundary conditions are

  16. Comment on “Theoretical analysis of high-field transport in graphene on a substrate” [J. Appl. Phys. 116, 034507 (2014)

    International Nuclear Information System (INIS)

    Tan, Michael L. P.; Arora, Vijay K.

    2014-01-01

    In a recent article, Serov et al. [J. Appl. Phys. 116, 034507 (2014)] claim: “This study represents the first time that the high-field behavior in graphene on a substrate was investigated taking into account intrinsic graphene properties,” ignoring the most recent anisotropic distribution function [V. K. Arora et al., J. Appl. Phys. 112, 114330 (2012)] also published in J. Appl. Phys., targeting the same experimental data [V. E. Dorgan et al., Appl. Phys. Lett. 97, 082112 (2010)]. The claim of Serov et al. of being first is refuted and many shortcomings of the hydrodynamic model for a highly quantum and degenerate graphene nanolayer are pointed out

  17. Epistatic participation of REV1 and REV3 in the formation of UV-induced frameshift mutations in cell cycle-arrested yeast cells

    Energy Technology Data Exchange (ETDEWEB)

    Heidenreich, Erich [Institute of Cancer Research, Department of Medicine I, Medical University of Vienna, Borschkegasse 8a, A-1090 Vienna (Austria)]. E-mail: erich.heidenreich@meduniwien.ac.at; Eisler, Herfried [Institute of Cancer Research, Department of Medicine I, Medical University of Vienna, Borschkegasse 8a, A-1090 Vienna (Austria); Steinboeck, Ferdinand [Institute of Cancer Research, Department of Medicine I, Medical University of Vienna, Borschkegasse 8a, A-1090 Vienna (Austria)

    2006-01-29

    Mutations arising in times of cell cycle arrest may provide a selective advantage for unicellular organisms adapting to environmental changes. For multicellular organisms, however, they may pose a serious threat, in that such mutations in somatic cells contribute to carcinogenesis and ageing. The budding yeast Saccharomyces cerevisiae presents a convenient model system for studying the incidence and the mechanisms of stationary-phase mutation in a eukaryotic organism. Having studied the emergence of frameshift mutants after several days of starvation-induced cell cycle arrest, we previously reported that all (potentially error-prone) translesion synthesis (TLS) enzymes identified in S. cerevisiae did not contribute to the basal level of spontaneous stationary-phase mutations. However, we observed that an increased frequency of stationary-phase frameshift mutations, brought about by a defective nucleotide excision repair (NER) pathway or by UV irradiation, was dependent on Rev3p, the catalytic subunit of the TLS polymerase zeta (Pol {zeta}). Employing the same two conditions, we now examined the effect of deletions of the genes coding for polymerase eta (Pol {eta}) (RAD30) and Rev1p (REV1). In a NER-deficient strain background, the increased incidence of stationary-phase mutations was only moderately influenced by a lack of Pol {eta} but completely reduced to wild type level by a knockout of the REV1 gene. UV-induced stationary-phase mutations were abundant in wild type and rad30{delta} strains, but substantially reduced in a rev1{delta} as well as a rev3{delta} strain. The similarity of the rev1{delta} and the rev3{delta} phenotype and an epistatic relationship evident from experiments with a double-deficient strain suggests a participation of Rev1p and Rev3p in the same mutagenic pathway. Based on these results, we propose that the response of cell cycle-arrested cells to an excess of exo- or endogenously induced DNA damage includes a novel replication

  18. SSC-K code users manual (rev.1)

    International Nuclear Information System (INIS)

    Kwon, Y. M.; Lee, Y. B.; Chang, W. P.; Hahn, D.

    2002-01-01

    The Supper System Code of KAERI (SSC-K) is a best-estimate system code for analyzing a variety of off-normal or accidents in the heat transport system of a pool type LMR design. It is being developed at Korea Atomic Energy Research Institution (KAERI) on the basis of SSC-L, originally developed at BNL to analyze loop-type LMR transients. SSC-K can handle both designs of loop and pool type LMRs. SSC-K contains detailed mechanistic models of transient thermal, hydraulic, neutronic, and mechanical phenomena to describe the response of the reactor core, coolant, fuel elements, and structures to accident conditions. This report provides a revised User's Manual (rev.1) of the SSC-K computer code, focusing on phenomenological model descriptions for new thermal, hydraulic, neutronic, and mechanical modules. A comprehensive description of the models for pool-type reactor is given in Chapters 2 and 3; the steady-state plant characterization, prior to the initiation of transient is described in Chapter 2 and their transient counterparts are discussed in Chapter 3. Discussions on the intermediate heat exchanger (IHX) and the electromagnetic (EM) pump are described in Chapter 4 and 5, respectively. A model of passive safety decay heat removal system (PSDRS) is discussed in Chapter 6, and models for various reactivity feedback effects are discussed in Chapter 7. In Chapter 8, constitutive laws and correlations required to execute the SSC-K are described. New models developed for SSC-K rev.1 are two dimensional hot pool model in Chapter 9, and long term cooling model in Chapter 10. Finally, a brief description of MINET code adopted to simulate BOP is presented in Chapter 11. Based on test runs for typical LMFBR accident analyses, it was found that the present version of SSC-K would be used for the safety analysis of KALIMER. However, the further validation of SSC-K is required for real applications. It is noted that the user's manual of SSC-K will be revised later with the

  19. Molecular interaction between K-Ras and H-REV107 in the Ras signaling pathway.

    Science.gov (United States)

    Han, Chang Woo; Jeong, Mi Suk; Jang, Se Bok

    2017-09-16

    Ras proteins are small GTPases that serve as master moderators of a large number of signaling pathways involved in various cellular processes. Activating mutations in Ras are found in about one-third of cancers. H-REV107, a K-Ras binding protein, plays an important role in determining K-Ras function. H-REV107 is a member of the HREV107 family of class II tumor suppressor genes and a growth inhibitory Ras target gene that suppresses cellular growth, differentiation, and apoptosis. Expression of H-REV107 was strongly reduced in about 50% of human carcinoma cell lines. However, the specific molecular mechanism by which H-REV107 inhibits Ras is still unknown. In the present study, we suggest that H-REV107 forms a strong complex with activating oncogenic mutation Q61H K-Ras from various biochemical binding assays and modeled structures. In addition, the interaction sites between K-Ras and H-REV107 were predicted based on homology modeling. Here, we found that some structure-based mutants of the K-Ras disrupted the complex formation with H-REV107. Finally, a novel molecular mechanism describing K-Ras and H-REV107 binding is suggested and insights into new K-Ras effector target drugs are provided. Copyright © 2017 Elsevier Inc. All rights reserved.

  20. RevManHAL: towards automatic text generation in systematic reviews.

    Science.gov (United States)

    Torres Torres, Mercedes; Adams, Clive E

    2017-02-09

    Systematic reviews are a key part of healthcare evaluation. They involve important painstaking but repetitive work. A major producer of systematic reviews, the Cochrane Collaboration, employs Review Manager (RevMan) programme-a software which assists reviewers and produces XML-structured files. This paper describes an add-on programme (RevManHAL) which helps auto-generate the abstract, results and discussion sections of RevMan-generated reviews in multiple languages. The paper also describes future developments for RevManHAL. RevManHAL was created in Java using NetBeans by a programmer working full time for 2 months. The resulting open-source programme uses editable phrase banks to envelop text/numbers from within the prepared RevMan file in formatted readable text of a chosen language. In this way, considerable parts of the review's 'abstract', 'results' and 'discussion' sections are created and a phrase added to 'acknowledgements'. RevManHAL's output needs to be checked by reviewers, but already, from our experience within the Cochrane Schizophrenia Group (200 maintained reviews, 900 reviewers), RevManHAL has saved much time which is better employed thinking about the meaning of the data rather than restating them. Many more functions will become possible as review writing becomes increasingly automated.

  1. Wind Farm Wake: The Horns Rev Photo Case

    Directory of Open Access Journals (Sweden)

    Pierre-Elouan Réthoré

    2013-02-01

    Full Text Available The aim of the paper is to examine the nowadays well-known wind farm wake photographs taken on 12 February 2008 at the offshore Horns Rev 1 wind farm. The meteorological conditions are described from observations from several satellite sensors quantifying clouds, surface wind vectors and sea surface temperature as well as ground-based information at and near the wind farm, including Supervisory Control and Data Acquisition (SCADA data. The SCADA data reveal that the case of fog formation occurred 12 February 2008 on the 10:10 UTC. The fog formation is due to very special atmospheric conditions where a layer of cold humid air above a warmer sea surface re-condensates to fog in the wake of the turbines. The process is fed by warm humid air up-drafted from below in the counter-rotating swirl generated by the clock-wise rotating rotors. The condensation appears to take place primarily in the wake regions with relatively high axial velocities and high turbulent kinetic energy. The wind speed is near cut-in and most turbines produce very little power. The rotational pattern of spiraling bands produces the large-scale structure of the wake fog.

  2. HIV-1 pre-mRNA commitment to Rev mediated export through PSF and Matrin 3

    International Nuclear Information System (INIS)

    Kula, Anna; Gharu, Lavina; Marcello, Alessandro

    2013-01-01

    Human immunodeficiency virus gene expression and replication are regulated at several levels. Incompletely spliced viral RNAs and full-length genomic RNA contain the RRE element and are bound by the viral trans-acting protein Rev to be transported out of the nucleus. Previously we found that the nuclear matrix protein MATR3 was a cofactor of Rev-mediated RNA export. Here we show that the pleiotropic protein PSF binds viral RNA and is associated with MATR3. PSF is involved in the maintenance of a pool of RNA available for Rev activity. However, while Rev and PSF bind the viral pre-mRNA at the site of viral transcription, MATR3 interacts at a subsequent step. We propose that PSF and MATR3 define a novel pathway for RRE-containing HIV-1 RNAs that is hijacked by the viral Rev protein.

  3. Caffeine Abolishes the Ultraviolet-Induced REV3 Translesion Replication Pathway in Mouse Cells

    Directory of Open Access Journals (Sweden)

    Kouichi Yamada

    2011-11-01

    Full Text Available When a replicative DNA polymerase stalls upon encountering a photoproduct on the template strand, it is relieved by other low-processivity polymerase(s, which insert nucleotide(s opposite the lesion. Using an alkaline sucrose density gradient sedimentation technique, we previously classified this process termed UV-induced translesion replication (UV-TLS into two types. In human cancer cells or xeroderma pigmentosum variant (XP-V cells, UV-TLS was inhibited by caffeine or proteasome inhibitors. However, in normal human cells, the process was insensitive to these reagents. Reportedly, in yeast or mammalian cells, REV3 protein (a catalytic subunit of DNA polymerase ζ is predominantly involved in the former type of TLS. Here, we studied UV-TLS in fibroblasts derived from the Rev3-knockout mouse embryo (Rev3KO-MEF. In the wild-type MEF, UV-TLS was slow (similar to that of human cancer cells or XP-V cells, and was abolished by caffeine or MG-262. In 2 cell lines of Rev3KO-MEF (Rev3−/− p53−/−, UV-TLS was not observed. In p53KO-MEF, which is a strict control for Rev3KO-MEF, the UV-TLS response was similar to that of the wild-type. Introduction of the Rev3 expression plasmid into Rev3KO-MEF restored the UV-TLS response in selected stable transformants. In some transformants, viability to UV was the same as that in the wild-type, and the death rate was increased by caffeine. Our findings indicate that REV3 is predominantly involved in UV-TLS in mouse cells, and that the REV3 translesion pathway is suppressed by caffeine or proteasome inhibitors.

  4. Mining the Human Complexome Database Identifies RBM14 as an XPO1-Associated Protein Involved in HIV-1 Rev Function

    OpenAIRE

    Budhiraja, Sona; Liu, Hongbing; Couturier, Jacob; Malovannaya, Anna; Qin, Jun; Lewis, Dorothy E.; Rice, Andrew P.

    2015-01-01

    By recruiting the host protein XPO1 (CRM1), the HIV-1 Rev protein mediates the nuclear export of incompletely spliced viral transcripts. We mined data from the recently described human nuclear complexome to identify a host protein, RBM14, which associates with XPO1 and Rev and is involved in Rev function. Using a Rev-dependent p24 reporter plasmid, we found that RBM14 depletion decreased Rev activity and Rev-mediated enhancement of the cytoplasmic levels of unspliced viral transcripts. RBM14 ...

  5. Thermophysical Properties of Matter - The TPRC Data Series. Volume 8. Thermal Radiative Properties - Nonmetallic Solids

    Science.gov (United States)

    1972-01-01

    Iron oxldes- kaolin -aagneslum oxides- manganese oxldes-marble-nlckel oxldes-obsldlan-opal-opal glass-plexlglas- mylar—polyethylene-pyrocerams—quarts...34Dielectric Dispersion of Some Perovskite Zirconates," Phys. Rev. , A138(5), 1537-8, 1965. Loferski, J. J., "Infra-Red Optical Properties of Single...1), 131-40, 1967. Perry, C. H., "Far-Infrared Reflectance Spectra and Dielectric Dispersion of a Variety of Materials Having the Perovskite and

  6. Rev-erb beta regulates the Srebp-1c promoter and mRNA expression in skeletal muscle cells

    Energy Technology Data Exchange (ETDEWEB)

    Ramakrishnan, Sathiya N.; Lau, Patrick; Crowther, Lisa M. [The University of Queensland, Institute for Molecular Bioscience, St. Lucia, Qld 4072 (Australia); Cleasby, Mark E. [Diabetes and Obesity Research Program, Garvan Institute of Medical Research, St. Vincent' s Hospital, 384 Victoria Street, Darlinghurst, Sydney, NSW 2010 (Australia); Millard, Susan; Leong, Gary M. [The University of Queensland, Institute for Molecular Bioscience, St. Lucia, Qld 4072 (Australia); Cooney, Gregory J. [Diabetes and Obesity Research Program, Garvan Institute of Medical Research, St. Vincent' s Hospital, 384 Victoria Street, Darlinghurst, Sydney, NSW 2010 (Australia); Muscat, George E.O., E-mail: g.muscat@imb.uq.edu.au [The University of Queensland, Institute for Molecular Bioscience, St. Lucia, Qld 4072 (Australia)

    2009-10-30

    The nuclear hormone receptor, Rev-erb beta operates as a transcriptional silencer. We previously demonstrated that exogenous expression of Rev-erb{beta}{Delta}E in skeletal muscle cells increased Srebp-1c mRNA expression. We validated these in vitro observations by injection of an expression vector driving Rev-erb{beta}{Delta}E expression into mouse tibialis muscle that resulted in increased Srebp-1c mRNA expression. Paradoxically, Rev-erb{beta} siRNA expression in skeletal muscle cells repressed Srebp-1c expression, and indicated that Rev-erb{beta} expression was necessary for Srebp-1c expression. ChIP analysis demonstrated that Rev-erb{beta} was recruited to the Srebp-1c promoter. Moreover, Rev-erb{beta} trans-activated the Srebp-1c promoter, in contrast, Rev-erb{beta} efficiently repressed the Rev-erb{alpha} promoter, a previously characterized target gene. Finally, treatment with the Rev-erb agonist (hemin) (i) increased the trans-activation of the Srebp-1c promoter by Rev-erb{beta}; and (ii) increased Rev-erb{beta} and Srebp-1c mRNA expression. These data suggest that Rev-erb{beta} has the potential to activate gene expression, and is a positive regulator of Srebp-1c, a regulator of lipogenesis.

  7. Response to 'Comment on 'Pinch current limitation effect in plasma focus'' [Appl. Phys. Lett. 94, 076101 (2009)

    International Nuclear Information System (INIS)

    Lee, S.; Saw, S. H.

    2009-01-01

    The main point of the comment [Appl. Phys. Lett. 94, 076101 (2009)] is that Eq. (2) and consequentially Eq. (3) of the commented paper [Appl. Phys. Lett. 92, 021503 (2008)] require correction. The alternative equation suggested in the comment is derived using Kirchhoff's voltage rule. The comment consider only the energy distribution in the inductive components and the resultant equation confirms a progressive lowering of the I pinch /I peak ratio as the static inductance L 0 is reduced, lowering from 0.87 to 0.31 as L 0 is reduced from 100 to 5 nH according to the revised formula corresponding to Eq. (3), compared to 0.63-0.25 according to Eq. (3). This progressive lowering of the ratio I pinch /I peak due to the inductive energy distribution is one of two factors responsible for the pinch current limitation. The other factor is the progressive reduction in the L-C interaction time compared to the current dip duration denoted by δ cap in Eq. (2). The comment does not deal with δ cap at all; hence, its conclusion based on inductive energy distribution only is not useful, since in the low L 0 region when pinch current limitation begins to manifest, δ cap becomes more and more the dominant factor. In any case, the results of the paper do not depend on Eqs. (2) and (3), which are used in the paper only for illustrative purposes

  8. TEN YEARS OF THE NORTHEASTERN NURSING NETWORK JOURNAL - REV RENE: A DREAM COME TRUE

    Directory of Open Access Journals (Sweden)

    Inacia Sátiro Xavier de Franca

    2011-01-01

    Full Text Available Objetivou-se analisar a memória histórica da Rev Rene ao longo de uma década de sua existência destacando a sua organização, a produção científica e as conquistas alcançadas no concernente a sua indexação nas bases de dados. Estudo fenomenológico cujos dados foram coletados por meio de um formulário, submetidos a associações livres e interpretados em consonância com “A poética do espaço”. Os núcleos foram: Universidade Federal do Ceará (UFC — A casa da Rev Rene; A Rev Rene — ninho — um espaço aberto aos pesquisadores da Saúde e áreas afins; Poética das gavetas do cofre e dos armários — o capital científico da Rev Rene à disposição dos leitores; A Rev Rene — concha — uma homologia poética; A Rev Rene é redonda — Metas e ações para a projeção no cenário nacional e internacional. A Rev Rene transpôs a dimensão do sonho e consolidou-se como um lócus de ciência.

  9. Rev-Erb co-regulates muscle regeneration via tethered interaction with the NF-Y cistrome

    Directory of Open Access Journals (Sweden)

    Ryan D. Welch

    2017-07-01

    Conclusions: Disrupting Rev-Erb activity in injured muscle accelerates regenerative muscle repair/differentiation through transcriptional de-repression of myogenic programs. Rev-Erb, therefore, may be a potent therapeutic target for a myriad of muscular disorders.

  10. Rev1, Rev3, or Rev7 siRNA Abolishes Ultraviolet Light-Induced Translesion Replication in HeLa Cells: A Comprehensive Study Using Alkaline Sucrose Density Gradient Sedimentation

    Directory of Open Access Journals (Sweden)

    Jun Takezawa

    2010-01-01

    Full Text Available When a replicative DNA polymerase stalls upon encountering a lesion on the template strand, it is relieved by other low-processivity polymerase(s, which insert nucleotide(s opposite the lesion, extend by a few nucleotides, and dissociate from the 3′-OH. The replicative polymerase then resumes DNA synthesis. This process, termed translesion replication (TLS or replicative bypass, may involve at least five different polymerases in mammals, although the participating polymerases and their roles have not been entirely characterized. Using siRNAs originally designed and an alkaline sucrose density gradient sedimentation technique, we verified the involvement of several polymerases in ultraviolet (UV light-induced TLS in HeLa cells. First, siRNAs to Rev3 or Rev7 largely abolished UV-TLS, suggesting that these 2 gene products, which comprise Polζ, play a main role in mutagenic TLS. Second, Rev1-targeted siRNA also abrogated UV-TLS, indicating that Rev1 is also indispensable to mutagenic TLS. Third, Polη-targeted siRNA also prevented TLS to a greater extent than our expectations. Forth, although siRNA to Polι had no detectable effect, that to Polκ delayed UV-TLS. To our knowledge, this is the first study reporting apparent evidence for the participation of Polκ in UV-TLS.

  11. Comment on “Stationary self-focusing of Gaussian laser beam in relativistic thermal quantum plasma” [Phys. Plasmas 20, 072703 (2013)

    International Nuclear Information System (INIS)

    Habibi, M.; Ghamari, F.

    2014-01-01

    Patil and Takale in their recent article [Phys. Plasmas 20, 072703 (2013)], by evaluating the quantum dielectric response in thermal quantum plasma, have modeled the relativistic self-focusing of Gaussian laser beam in a plasma. We have found that there are some important shortcomings and fundamental mistakes in Patil and Takale [Phys. Plasmas 20, 072703 (2013)] that we give a brief description about them and refer readers to important misconception about the use of the Fermi temperature in quantum plasmas, appearing in Patil and Takale [Phys. Plasmas 20, 072703 (2013)

  12. Teede REV-2 otsustas börsile minna / Gea Velthut-Sokka

    Index Scriptorium Estoniae

    Velthut-Sokka, Gea, 1977-

    2004-01-01

    Eelmise aasta edukaima ehitusfirma Teede REV-2 ja tema suurinvestori Alta Kapital esindajad põhjendavad börsile mineku otsust. Tabelid ja diagrammid: Veerandi aktsiate omanikuvahetus börsilemineku peaprooviks

  13. REV ÜRÜNLERİN MUHASEBELEŞTİRİLMESİ

    OpenAIRE

    YURT, Eda

    2009-01-01

    Eda, Yurt, Türev Ürünlerin Muhasebelestirilmesi, Tezsiz Yüksek Lisans Dönem Projesi,Danısman: Doç. Dr. Kadir Gürdal, 58 s.BİTİRME PROJESİ ÖZETİProje finansal araçlar olarak türev ürünlerin muhasebelestirilmesine iliskinstandartların incelenmesini amaçlamaktadır. Öncelikle finansal risk tanımlanmıstır.Daha sonra türev piyasaların tarihi anlatılmıs ve islem gördükleri piyasalara göresınıflandırılmıstır. Bu temel açıklamalar sonrasında türev ürünler için UluslararasıMuhasebe Standartları incelen...

  14. A new approach to physics. Vol. 1. rev. ed.

    International Nuclear Information System (INIS)

    Luescher, E.; Jodl, H.

    1976-01-01

    Using a novel didactic principle, this book intends to give a general survey and to offer approaches of varying degrees of difficulty to all fields of physics. Graphs serve to present physics in general and all its partial aspects in a logical order which is in accordance with the latest state of knowledge. This frame is filled out by the chapters which present their subjects without undue mathematization, supplemented and livened up by practical examples. This first volume contains the chapters on the methods of scientific thinking, matter and energy, the genealogical tree of physics, mechanics, electrodynamics, solid state physics. (GSC) [de

  15. The RNA helicase DDX1 is involved in restricted HIV-1 Rev function in human astrocytes

    International Nuclear Information System (INIS)

    Fang Jianhua; Acheampong, Edward; Dave, Rajnish; Wang Fengxiang; Mukhtar, Muhammad; Pomerantz, Roger J.

    2005-01-01

    Productive infection by human immunodeficiency virus type I (HIV-1) in the central nervous system (CNS) involves mainly macrophages and microglial cells. A frequency of less than 10% of human astrocytes is estimated to be infectable with HIV-1. Nonetheless, this relatively low percentage of infected astrocytes, but associated with a large total number of astrocytic cells in the CNS, makes human astrocytes a critical part in the analyses of potential HIV-1 reservoirs in vivo. Investigations in astrocytic cell lines and primary human fetal astrocytes revealed that limited HIV-1 replication in these cells resulted from low-level viral entry, transcription, viral protein processing, and virion maturation. Of note, a low ratio of unspliced versus spliced HIV-1-specific RNA was also investigated, as Rev appeared to act aberrantly in astrocytes, via loss of nuclear and/or nucleolar localization and diminished Rev-mediated function. Host cellular machinery enabling Rev function has become critical for elucidation of diminished Rev activity, especially for those factors leading to RNA metabolism. We have recently identified a DEAD-box protein, DDX1, as a Rev cellular co-factor and now have explored its potential importance in astrocytes. Cells were infected with HIV-1 pseudotyped with envelope glycoproteins of amphotropic murine leukemia viruses (MLV). Semi-quantitative reverse transcriptase-polymerase chain reactions (RT-PCR) for unspliced, singly-spliced, and multiply-spliced RNA clearly showed a lower ratio of unspliced/singly-spliced over multiply-spliced HIV-1-specific RNA in human astrocytes as compared to Rev-permissive, non-glial control cells. As well, the cellular localization of Rev in astrocytes was cytoplasmically dominant as compared to that of Rev-permissive, non-glial controls. This endogenous level of DDX1 expression in astrocytes was demonstrated directly to lead to a shift of Rev sub-cellular distribution dominance from nuclear and/or nucleolar to

  16. Pharmacological Targeting the REV-ERBs in Sleep/Wake Regulation

    Science.gov (United States)

    Amador, Ariadna; Huitron-Resendiz, Salvador; Roberts, Amanda J.; Kamenecka, Theodore M.; Solt, Laura A.; Burris, Thomas P.

    2016-01-01

    The circadian clock maintains appropriate timing for a wide range of behaviors and physiological processes. Circadian behaviors such as sleep and wakefulness are intrinsically dependent on the precise oscillation of the endogenous molecular machinery that regulates the circadian clock. The identical core clock machinery regulates myriad endocrine and metabolic functions providing a link between sleep and metabolic health. The REV-ERBs (REV-ERBα and REV-ERBβ) are nuclear receptors that are key regulators of the molecular clock and have been successfully targeted using small molecule ligands. Recent studies in mice suggest that REV-ERB-specific synthetic agonists modulate metabolic activity as well as alter sleep architecture, inducing wakefulness during the light period. Therefore, these small molecules represent unique tools to extensively study REV-ERB regulation of sleep and wakefulness. In these studies, our aim was to further investigate the therapeutic potential of targeting the REV-ERBs for regulation of sleep by characterizing efficacy, and optimal dosing time of the REV-ERB agonist SR9009 using electroencephalographic (EEG) recordings. Applying different experimental paradigms in mice, our studies establish that SR9009 does not lose efficacy when administered more than once a day, nor does tolerance develop when administered once a day over a three-day dosing regimen. Moreover, through use of a time response paradigm, we determined that although there is an optimal time for administration of SR9009 in terms of maximal efficacy, there is a 12-hour window in which SR9009 elicited a response. Our studies indicate that the REV-ERBs are potential therapeutic targets for treating sleep problems as those encountered as a consequence of shift work or jet lag. PMID:27603791

  17. Response to "Comment on `Solitonic and chaotic behaviors for the nonlinear dust-acoustic waves in a magnetized dusty plasma'" [Phys. Plasmas 24, 094701 (2017)

    Science.gov (United States)

    Zhen, Hui-Ling; Tian, Bo; Xie, Xi-Yang; Wu, Xiao-Yu; Wen, Xiao-Yong

    2018-02-01

    On our previous construction [H. L. Zhen et al., Phys. Plasmas 23, 052301 (2016)] of the soliton solutions of a model describing the dynamics of the dust particles in a weakly ionized, collisional dusty plasma comprised of the negatively charged cold dust particles, hot ions, hot electrons, and stationary neutrals in the presence of an external static magnetic field, Ali et al. [Phys. Plasmas 24, 094701 (2017)] have commented that there exists a different form of Eq. (4) from that shown in Zhen et al. [Phys. Plasmas 23, 052301 (2016)] and that certain interesting phenomena with the dust neutral collision frequency ν0>0 are ignored in Zhen et al. [Phys. Plasmas 23, 052301 (2016)]. In this Reply, according to the transformation given by the Ali et al. [Phys. Plasmas 24, 094701 (2017)] comment, we present some one-, two-, and N-soliton solutions which have not been obtained in the Ali et al. [Phys. Plasmas 24, 094701 (2017)] comment. We point out that our previous solutions in Zhen et al. [Phys. Plasmas 23, 052301 (2016)] are still valid because of the similarity between the two dispersion relations of previous solutions in Zhen et al. [Phys. Plasmas 23, 052301 (2016)] and the solutions presented in this Reply. Based on our soliton solutions in this Reply, it is found that the soliton amplitude is inversely related to Zd and B0, but positively related to md and α, where α refers to the coefficient of the nonlinear term, Zd and md are the charge number and mass of a dust particle, respectively, B0 represents the strength of the external static magnetic field. We also find that the two solitons are always in parallel during the propagation.

  18. Offshore wind farms in the local environment - an examination at Horns Rev Offshore Wind Farm. Background report; Havvindmoeller i lokalomraadet - en undersoegelse ved Horns Rev Havmoellepark. Baggrundsrapport

    Energy Technology Data Exchange (ETDEWEB)

    Kuehn, Susanne

    2005-07-01

    Horns Rev Offshore Wind Farm was built in 2002. A presentation is made of a sociological, qualitative survey on the local community's reception of the offshore wind farm. The survey aims at identifying attitudes towards the farm before and after the construction, with a view to identifying possible changes in attitudes, and explain the reasons for these (ml)

  19. Nullbasic, a potent anti-HIV tat mutant, induces CRM1-dependent disruption of HIV rev trafficking.

    Directory of Open Access Journals (Sweden)

    Min-Hsuan Lin

    Full Text Available Nullbasic, a mutant of the HIV-1 Tat protein, has anti-HIV-1 activity through mechanisms that include inhibition of Rev function and redistribution of the HIV-1 Rev protein from the nucleolus to the nucleoplasm and cytoplasm. Here we investigate the mechanism of this effect for the first time, establishing that redistribution of Rev by Nullbasic is not due to direct interaction between the two proteins. Rather, Nullbasic affects subcellular localization of cellular proteins that regulate Rev trafficking. In particular, Nullbasic induced redistribution of exportin 1 (CRM1, nucleophosmin (B23 and nucleolin (C23 from the nucleolus to the nucleus when Rev was coexpressed, but never in its absence. Inhibition of the Rev:CRM1 interaction by leptomycin B or a non-interacting RevM10 mutant completely blocked redistribution of Rev by Nullbasic. Finally, Nullbasic did not inhibit importin β- or transportin 1-mediated nuclear import, suggesting that cytoplasmic accumulation of Rev was due to increased export by CRM1. Overall, our data support the conclusion that CRM1-dependent subcellular redistribution of Rev from the nucleolus by Nullbasic is not through general perturbation of either nuclear import or export. Rather, Nullbasic appears to interact with and disrupt specific components of a Rev trafficking complex required for its nucleocytoplasmic shuttling and, in particular, its nucleolar accumulation.

  20. Nuclear Factor 90, a cellular dsRNA binding protein inhibits the HIV Rev-export function

    Directory of Open Access Journals (Sweden)

    St-Laurent Georges

    2006-11-01

    Full Text Available Abstract Background The HIV Rev protein is known to facilitate export of incompletely spliced and unspliced viral transcripts to the cytoplasm, a necessary step in virus life cycle. The Rev-mediated nucleo-cytoplasmic transport of nascent viral transcripts, dependents on interaction of Rev with the RRE RNA structural element present in the target RNAs. The C-terminal variant of dsRNA-binding nuclear protein 90 (NF90ctv has been shown to markedly attenuate viral replication in stably transduced HIV-1 target cell line. Here we examined a mechanism of interference of viral life cycle involving Rev-NF90ctv interaction. Results Since Rev:RRE complex formations depend on protein:RNA and protein:protein interactions, we investigated whether the expression of NF90ctv might interfere with Rev-mediated export of RRE-containing transcripts. When HeLa cells expressed both NF90ctv and Rev protein, we observed that NF90ctv inhibited the Rev-mediated RNA transport. In particular, three regions of NF90ctv protein are involved in blocking Rev function. Moreover, interaction of NF90ctv with the RRE RNA resulted in the expression of a reporter protein coding sequences linked to the RRE structure. Moreover, Rev influenced the subcellular localization of NF90ctv, and this process is leptomycin B sensitive. Conclusion The dsRNA binding protein, NF90ctv competes with HIV Rev function at two levels, by competitive protein:protein interaction involving Rev binding to specific domains of NF90ctv, as well as by its binding to the RRE-RNA structure. Our results are consistent with a model of Rev-mediated HIV-1 RNA export that envisions Rev-multimerization, a process interrupted by NF90ctv.

  1. The existence of a plastic phase and a solid-liquid dynamical bistability region in small fullerene cluster (C60)7: molecular dynamics simulation

    International Nuclear Information System (INIS)

    Piatek, A; Dawid, A; Gburski, Z

    2006-01-01

    We have simulated (by the molecular dymanics (MD) method) the dynamics of fullerenes (C 60 ) in an extremely small cluster composed of only as many as seven C 60 molecules. The interaction is taken to be the full 60-site pairwise additive Lennard-Jones (LJ) potential which generates both translational and anisotropic rotational motions of each molecule. Our atomically detailed MD simulations discover the plastic phase (no translations but active reorientations of fullerenes) at low energies (temperatures) of the (C 60 ) 7 cluster. We provide the in-depth evidence of the dynamical solid-liquid bistability region in the investigated cluster. Moreover, we confirm the existence of the liquid phase in (C 60 ) 7 , the finding of Gallego et al (1999 Phys. Rev. Lett. 83 5258) obtained earlier on the basis of Girifalco's model, which assumes single-site only and spherically symmetrical interaction between C 60 molecules. We have calculated the translational and angular velocity autocorrelation functions and estimated the diffusion coefficient of fullerene in the liquid phase

  2. REV-ERBalpha participates in circadian SREBP signaling and bile acid homeostasis.

    Directory of Open Access Journals (Sweden)

    Gwendal Le Martelot

    2009-09-01

    Full Text Available In mammals, many aspects of behavior and physiology, and in particular cellular metabolism, are coordinated by the circadian timing system. Molecular clocks are thought to rely on negative feedback loops in clock gene expression that engender oscillations in the accumulation of transcriptional regulatory proteins, such as the orphan receptor REV-ERBalpha. Circadian transcription factors then drive daily rhythms in the expression of clock-controlled output genes, for example genes encoding enzymes and regulators of cellular metabolism. To gain insight into clock output functions of REV-ERBalpha, we carried out genome-wide transcriptome profiling experiments with liver RNA from wild-type mice, Rev-erbalpha knock-out mice, or REV-ERBalpha overexpressing mice. On the basis of these genetic loss- and gain-of-function experiments, we concluded that REV-ERBalpha participates in the circadian modulation of sterol regulatory element-binding protein (SREBP activity, and thereby in the daily expression of SREBP target genes involved in cholesterol and lipid metabolism. This control is exerted via the cyclic transcription of Insig2, encoding a trans-membrane protein that sequesters SREBP proteins to the endoplasmic reticulum membranes and thereby interferes with the proteolytic activation of SREBPs in Golgi membranes. REV-ERBalpha also participates in the cyclic expression of cholesterol-7alpha-hydroxylase (CYP7A1, the rate-limiting enzyme in converting cholesterol to bile acids. Our findings suggest that this control acts via the stimulation of LXR nuclear receptors by cyclically produced oxysterols. In conclusion, our study suggests that rhythmic cholesterol and bile acid metabolism is not just driven by alternating feeding-fasting cycles, but also by REV-ERBalpha, a component of the circadian clockwork circuitry.

  3. Quantum mechanics. Textbook on theoretical physics III. 4. rev. ed.

    International Nuclear Information System (INIS)

    Fliessbach, T.

    2005-01-01

    This textbook present an intoduction to quantum mechanics, as it is offerred at the university in the cycle ''Theoretical Physics''. Special value has the author put on a well readable, understandable, and surveyable representation, so that the reader it can reproduce without larger difficulties. By the partition into chapters, which form separated course units, and the kind of the representation the book is also suited for bachelor curricula. The quantum mechanics are first introduced in the form of Schroedinge's wave mechanics. The fundamental relations of quantum mechanics and their interpretation are thereby explained by means of examples and first applications. In the following chapters the most important applications of the Schroedinger equation are studied, like the alpha decay, the scattering of a particle on a potential, and the hydrogen atom. Thereafter the abstract formulation of quantum mechanics (Hilbert space) is introduced in analogy to the known structure of the vector space. This formulation is then applied to concrete problems like the oscillator, tha angular momentum, and the spin. The most important approximation methods of quantum mechanics are then summarized. In the concluding part about many-particle systems the ideal Fermi gas is treated; simple applications of this model in atomic, solid-state, nuclear, ans astrophysics are discussed

  4. Comment on 'Relation between space charge limited current and power loss in open drift tubes' [Phys. Plasmas 13, 073101 (2006)

    International Nuclear Information System (INIS)

    Swanekamp, S. B.; Schumer, J. W.

    2007-01-01

    In Phys Plasmas 13, 073101 (2006), the drop in the space-charge-limited (SCL) current for a beam injected into a space with an open boundary is analyzed with an electromagnetic particle-in-cell code. The authors explained the power loss observed at the open boundary as the loss of electromagnetic radiation created from the deceleration of electrons in the gap, and they developed an effective voltage theory to predict the drop in the SCL current observed in the simulations. In this Comment, we show that, provided the current remains below the SCL value, the electric and magnetic fields are constant in time so that power loss from the open boundary is a dc phenomenon with no rf power leaving through the boundary. We show that the electric and magnetic fields are static in time and static fields DO NOT RADIATE. Instead, the electron beam charges the collector plate, which causes a real electrostatic electric field to develop. The electron energy loss is not due to radiation but rather to the work done by this electrostatic field on the electrons as they move across the gap. This is precisely the energy dissipated in the matched resistance across the open boundary, which is a consequence of the boundary condition. Furthermore, since a real electrostatic potential develops, the voltage drop is real and there is no need to call the voltage drop an effective voltage

  5. AW-101 entrained solids - Solubility versus temperature

    International Nuclear Information System (INIS)

    GJ Lumetta; RC Lettau; GF Piepel

    2000-01-01

    This report describes the results of a test conducted by Battelle to assess the solubility of the solids entrained in the diluted AW-101 low-activity waste (LAW) sample. BNFL requested Battelle to dilute the AW-1-1 sample using de-ionized water to mimic expected plant operating conditions. BNFL further requested Battelle to assess the solubility of the solids present in the diluted AW-101 sample versus temperature conditions of 30, 40, and 50 C. BNFL requested these tests to assess the composition of the LAW supernatant and solids versus expected plant-operating conditions. The work was conducted according to test plan BNFL-TP-29953-7, Rev. 0, Determination of the Solubility of LAW Entrained Solids. The test went according to plan, with no deviations from the test plan

  6. Contributions of individual domains to function of the HIV-1 Rev response element.

    Science.gov (United States)

    O'Carroll, Ina P; Thappeta, Yashna; Fan, Lixin; Ramirez-Valdez, Edric A; Smith, Sean; Wang, Yun-Xing; Rein, Alan

    2017-08-16

    The HIV-1 Rev response element (RRE) is a 351-base element in unspliced and partially spliced viral RNA; binding of the RRE by the viral Rev protein induces nuclear export of RRE-containing RNAs, as required for virus replication. It contains one long, imperfect double helix (domain I), one branched domain (domain II) containing a high-affinity Rev-binding site, and two or three additional domains. We previously reported that the RRE assumes an "A" shape in solution and suggested that the location of the Rev binding sites in domains I and II, opposite each other on the two legs of the A, is optimal for Rev binding and explains Rev's specificity for RRE-containing RNAs. Using SAXS and a quantitative functional assay, we have now analyzed a panel of RRE mutants. All the results support the essential role of the A shape for RRE function. Moreover, they suggest that the distal portion of domain I and the three crowning domains all contribute to the maintenance of the A shape. Domains I and II are necessary and sufficient for substantial RRE function, provided they are joined by a flexible linker that allows the two domains to face each other. IMPORTANCE Retroviral replication requires that some of the viral RNAs transcribed in the cell nucleus be exported to the cytoplasm without being spliced. To achieve this, HIV-1 encodes a protein, Rev, which binds to a complex, highly structured element within viral RNA, the Rev Response Element (RRE), and escorts RRE-containing RNAs from the nucleus. We previously reported that the RRE is "A"-shaped and suggested that this architecture, with the 2 legs opposite one another, can explain the specificity of Rev for the RRE. We have analyzed the functional contributions of individual RRE domains, and now report that several domains contribute, with some redundancy, to maintenance of the overall RRE shape. The data strongly support the hypothesis that the opposed placement of the 2 legs is essential for RRE function. Copyright © 2017

  7. B23/nucleophosmin interacts with bovine immunodeficiency virus Rev protein and facilitates viral replication.

    Science.gov (United States)

    Passos-Castilho, Ana Maria; Marchand, Claude; Archambault, Denis

    2018-02-01

    The bovine immunodeficiency virus (BIV) Rev shuttling protein contains nuclear/nucleolar localization signals and nuclear import/export mechanisms that are novel among lentivirus Rev proteins. Several viral proteins localize to the nucleolus, which may play a role in processes that are essential to the outcome of viral replication. Although BIV Rev localizes to the nucleoli of transfected/infected cells and colocalizes with one of its major proteins, nucleophosmin (NPM1, also known as B23), the role of the nucleolus and B23 in BIV replication remains to be determined. Here, we demonstrate for the first time that BIV Rev interacts with nucleolar phosphoprotein B23 in cells. Using small interfering RNA (siRNA) technology, we show that depletion of B23 expression inhibits virus production by BIV-infected cells, indicating that B23 plays an important role in BIV replication. The interaction between Rev and B23 may represent a potential new target for the development of antiviral drugs against lentiviruses. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. SEM-REV: A sea test site for Marine Energy Converter

    International Nuclear Information System (INIS)

    Berhault, Christian; Le Crom, Izan; Le Bihan, Gerard

    2015-01-01

    Thanks to a main funding of Region des Pays de la Loire, the sea test site SEM-REV has been developed by Ecole Centrale de Nantes since 2007 to test both Wave Energy Converters and Floating Wind Turbine in real sea conditions. The sea test site is equipped with a set of oceanographic sensors and with an electric cable of 8 MW, connected to the French grid. The project is located close to Le Croisic, Western coast of France. SEM-REV is one of the main test facilities operated by Ecole Centrale de Nantes to support MRE technologies development. After presenting the initial motivations of the SEM-REV development, the paper describes, in parts 1 and 2, the complete administrative and technical processes that were followed to reach SEM-REV commissioning in 2014. The third part is focused on the exploitation process, including technical and contractual specifications imposed to the MRE developers for installation, tests and decommissioning phases. Some words are given also on the R and D projects using the SEM-REV in-situ monitoring system: prediction of environmental conditions, bio-fooling, acoustic impact. Even if operational phase is not started, expected extensions of the tests site are listed. (authors)

  9. Comment on 'On higher order corrections to gyrokinetic Vlasov-Poisson equations in the long wavelength limit' [Phys. Plasmas 16, 044506 (2009)

    International Nuclear Information System (INIS)

    Parra, Felix I.; Catto, Peter J.

    2009-01-01

    A recent publication [F. I. Parra and P. J. Catto, Plasma Phys. Controlled Fusion 50, 065014 (2008)] warned against the use of the lower order gyrokinetic Poisson equation at long wavelengths because the long wavelength, radial electric field must remain undetermined to the order the equation is obtained. Another reference [W. W. Lee and R. A. Kolesnikov, Phys. Plasmas 16, 044506 (2009)] criticizes these results by arguing that the higher order terms neglected in the most common gyrokinetic Poisson equation are formally smaller than the terms that are retained. This argument is flawed and ignores that the lower order terms, although formally larger, must cancel without determining the long wavelength, radial electric field. The reason for this cancellation is discussed. In addition, the origin of a nonlinear term present in the gyrokinetic Poisson equation [F. I. Parra and P. J. Catto, Plasma Phys. Controlled Fusion 50, 065014 (2008)] is explained.

  10. Ultraviolet-induced reversion of cyc1 alleles in radiation-sensitive strains of yeast. III. rev 3 mutant strains

    International Nuclear Information System (INIS)

    Lawrence, C.W.; Crhistensen, R.B.

    1979-01-01

    The role of rev3 gene function in uv-induced mutagenesis in the yeast Saccharomyces cerevisiae has been examined by determining the reversion of 12 well-defined cyc1 mutations in diploid strains homozygous for the rev3-1 or rev3-3 allale. The 12 cyc1 alleles include one ochre, one amber, four initiation, two proline missense, and four frameshift mutations. We find that the rev3 mutations reduce the frequency of UV-induced reversion of all of the cyc1 alleles, though different classes of alleles respond to a different extent. These results imply that the rev3 gene function is required for the production of a wide variety of mutational events, though probably not all, and show that each of the three rev loci have different mutational phenotypes. Such diverse phenotypes are not predicted by the unitary model for bacterial mutagenes, suggesting that this is at best an incomplete description of eukaryotic mutagenesis

  11. Innocuity and immune response to Brucella melitensis Rev.1 vaccine in camels (Camelus dromedarius

    Directory of Open Access Journals (Sweden)

    A. Benkirane

    2014-10-01

    Full Text Available A field trial was conducted in a camel brucellosis-free herd to evaluate antibody response to the Brucella melitensis Rev.1 vaccine in camels and assess shedding of the vaccine strain in milk. Twenty eight camels were divided into four groups according to their age and vaccination route. Groups A (n=3 and B (n=3 consisted of non-pregnant lactating female camels, vaccinated through subcutaneous and conjunctival routes, respectively. Groups C (n=10 consisted of 8-11 months old calves vaccinated through conjunctival route. The rest of the herd (n=12 composed of female and young camels were not vaccinated and were considered as the control group. Each animal from groups A, B and C was given the recommended dose of 2 x 109 colony forming units of Rev.1 vaccine irrespective of age or route of vaccination. Blood samples were collected from all the animals at the time of vaccination and at weekly, bi-weekly and monthly interval until 32 weeks post vaccination and from controls at weeks 8 and 24. The serological tests used were modified Rose Bengal Test, sero-agglutination test, and an indirect Enzyme Linked Immunosorbent Assay. Milk samples were collected from all vaccinated female camels and tested for the presence of Rev.1 vaccine strain. Most vaccinated animals started to show an antibody response at week 2 and remained positive until week 16. By week 20 post-vaccination all animals in the three groups were tested negative for Brucella antibodies. Bacteriological analysis of milk samples did not allow any isolation of Brucella melitensis. All samples were found Brucella negative in PCR analysis. The results of this study indicate that the Rev.1 vaccine induces seroconversion in camels. Rev.1 vaccine strain is not excreted in the milk of camels. These findings are promising as to the safe use of the Rev.1 vaccine in camels.

  12. Unprecedented NES non-antagonistic inhibitor for nuclear export of Rev from Sida cordifolia.

    Science.gov (United States)

    Tamura, Satoru; Kaneko, Masafumi; Shiomi, Atsushi; Yang, Guang-Ming; Yamaura, Toshiaki; Murakami, Nobutoshi

    2010-03-15

    Bioassay-guided separation from the MeOH extract of the South American medicinal plant Sida cordifolia resulted in isolation of (10E,12Z)-9-hydroxyoctadeca-10,12-dienoic acid (1) as an unprecedented NES non-antagonistic inhibitor for nuclear export of Rev. This mechanism of action was established by competitive experiment by the biotinylated probe derived from leptomycin B, the known NES antagonistic inhibitor. Additionally, structure-activity relationship analysis by use of the synthesized analogs clarified cooperation of several functionalities in the Rev-export inhibitory activity of 1. Copyright 2010 Elsevier Ltd. All rights reserved.

  13. Administrative Circular No. 22B (Rev. 2) - Compensation for hours of long-term shift work

    CERN Multimedia

    Department Head Office - HR Department

    2016-01-01

    Administrative Circular No. 22B (Rev. 2) entitled "Compensation for hours of long-term shift work",  approved by the Director-General following discussion in the Standing Concertation Committee meeting on 22 March 2016, will be available on 1st September 2016 via the following link: https://cds.cern.ch/record/2208538.   This revised circular cancels and replaces Administrative Circular No. 22B (Rev. 1) also entitled "Compensation for hours of long-term shift work" of March 2011. This document contains minor changes to reflect the new career structure. This circular will enter into force on 1st September 2016.

  14. Administrative Circular No. 13 (Rev. 4) - Guarantees for representatives of the personnel

    CERN Multimedia

    Department Head Office - HR Department

    2016-01-01

    Administrative Circular No. 13 (Rev. 4) entitled "Guarantees for representatives of the personnel", approved by the Director-General following discussion in the Standing Concertation Committee meeting on 22 March 2016, will be available on 1st September 2016 via the following link: https://cds.cern.ch/record/2208527.   This revised circular cancels and replaces Administrative Circular No. 13 (Rev. 3) also entitled "Guarantees for representatives of the personnel" of January 2014. This document contains a single change to reflect the terminology under the new career structure: the term "career path" is replaced by "grade". This circular will enter into force on 1st September 2016.

  15. Empirical investigation of wind farm blockage effects in Horn Rev 1 offshore wind farm

    DEFF Research Database (Denmark)

    Mitraszewski, Karol; Hansen, Kurt Schaldemose; Nygaard, Nicolai

    We present an empirical study of wind farm blockage effects based on Horns Rev 1 SCADA data. The mean inflow non-uniformities in wind speed are analyzed by calculating the mean power outputs of turbines located along the outer edges of the farm for different wind directions, wind speeds and stabi......We present an empirical study of wind farm blockage effects based on Horns Rev 1 SCADA data. The mean inflow non-uniformities in wind speed are analyzed by calculating the mean power outputs of turbines located along the outer edges of the farm for different wind directions, wind speeds...

  16. Investigations of migratory birds during operation of Horns Rev offshore wind farm. Annual status report 2004

    Energy Technology Data Exchange (ETDEWEB)

    Kjaer Christensen, T.; Hounisen, J.P. [NERI, Dept. of Wildlife Ecology and Biodiversity, Roskilde (Denmark)

    2005-07-01

    The aim of the project is to assess the collision risk between birds and wind turbines at the Horns Rev wind farm. The study focused on describing bird movements in relation to the wind farm and to identify the species-specific behavioural responses towards the wind turbines shown by migrating and staging bird species. The study was based on data from spring 2004. The Horns Rev area lies in a region known to be of importance for substantial water bird migration as well as holding internationally important numbers of several wintering and staging water bird species. (au)

  17. Investigations of migratory birds during operation of Horns Rev offshore wind farm. Annual status report 2004

    International Nuclear Information System (INIS)

    Kjaer Christensen, T.; Hounisen, J.P.

    2005-01-01

    The aim of the project is to assess the collision risk between birds and wind turbines at the Horns Rev wind farm. The study focused on describing bird movements in relation to the wind farm and to identify the species-specific behavioural responses towards the wind turbines shown by migrating and staging bird species. The study was based on data from spring 2004. The Horns Rev area lies in a region known to be of importance for substantial water bird migration as well as holding internationally important numbers of several wintering and staging water bird species. (au)

  18. RevTrans: multiple alignment of coding DNA from aligned amino acid sequences

    DEFF Research Database (Denmark)

    Wernersson, Rasmus; Pedersen, Anders Gorm

    2003-01-01

    The simple fact that proteins are built from 20 amino acids while DNA only contains four different bases, means that the 'signal-to-noise ratio' in protein sequence alignments is much better than in alignments of DNA. Besides this information-theoretical advantage, protein alignments also benefit...... proteins. It is therefore preferable to align coding DNA at the amino acid level and it is for this purpose we have constructed the program RevTrans. RevTrans constructs a multiple DNA alignment by: (i) translating the DNA; (ii) aligning the resulting peptide sequences; and (iii) building a multiple DNA...

  19. Administrative Circular No. 11 (Rev. 4) - Categories of members of the personnel

    CERN Multimedia

    HR Department

    2016-01-01

    Administrative Circular No. 11 (Rev. 4) entitled "Categories of members of the personnel", approved by the Director-General following discussion in the Standing Concertation Committee meeting on 29 April 2016, will be available on 1 August 2016 via this following link.    This revised circular cancels and replaces the Administrative Circular No. 11 (Rev. 3) also entitled "Categories of members of the personnel" of September 2014. The main changes concern the status of apprentices and their transfer from the category of employed members of personnel to associated members of personnel. This circular will enter into force on 1 August 2016. Department Head Office

  20. Rev1 Recruits Ung to Switch Regions and Enhances dU Glycosylation for Immunoglobulin Class Switch DNA Recombination

    Directory of Open Access Journals (Sweden)

    Hong Zan

    2012-11-01

    Full Text Available By diversifying the biological effector functions of antibodies, class switch DNA recombination (CSR plays a critical role in the maturation of the immune response. It is initiated by activation-induced cytidine deaminase (AID-mediated deoxycytosine deamination, yielding deoxyuridine (dU, and dU glycosylation by uracil DNA glycosylase (Ung in antibody switch (S region DNA. Here we showed that the translesion DNA synthesis polymerase Rev1 directly interacted with Ung and targeted in an AID-dependent and Ung-independent fashion the S regions undergoing CSR. Rev1−/− Ung+/+ B cells reduced Ung recruitment to S regions, DNA-dU glycosylation, and CSR. Together with an S region spectrum of mutations similar to that of Rev1+/+ Ung−/− B cells, this suggests that Rev1 operates in the same pathway as Ung, as emphasized by further decreased CSR in Rev1−/− Msh2−/− B cells. Rescue of CSR in Rev1−/− B cells by a catalytically inactive Rev1 mutant shows that the important role of Rev1 in CSR is mediated by Rev1’s scaffolding function, not its enzymatic function.

  1. Untitled

    Indian Academy of Sciences (India)

    thankful to the Department of Science and Technology for financial assistance. References. Crevecoeur C, and dc Wit H J 1971 Solid State Commun. 9 445. Goyal D R and Srivastava K K 1978 Indian J. Pure Appl. Phys. 16554. Kolomicts B T 1964 Phys. Status Solidi 7 359. Lakatos AI and Abkowitz M. 1971 Phys. Rev.

  2. Nanocrystalline solids

    International Nuclear Information System (INIS)

    Gleiter, H.

    1991-01-01

    Nanocrystalline solids are polycrystals, the crystal size of which is a few (typically 1 to 10) nanometres so that 50% or more of the solid consists of incoherent interfaces between crystals of different orientations. Solids consisting primarily of internal interfaces represent a separate class of atomic structures because the atomic arrangement formed in the core of an interface is known to be an arrangement of minimum energy in the potential field of the two adjacent crystal lattices with different crystallographic orientations on either side of the boundary core. These boundary conditions result in atomic structures in the interfacial cores which cannot be formed elsewhere (e.g. in glasses or perfect crystals). Nanocrystalline solids are of interest for the following four reasons: (1) Nanocrystalline solids exhibit an atomic structure which differs from that of the two known solid states: the crystalline (with long-range order) and the glassy (with short-range order). (2) The properties of nanocrystalline solids differ (in some cases by several orders of magnitude) from those of glasses and/or crystals with the same chemical composition, which suggests that they may be utilized technologically in the future. (3) Nanocrystalline solids seem to permit the alloying of conventionally immiscible components. (4) If small (1 to 10 nm diameter) solid droplets with a glassy structure are consolidated (instead of small crystals), a new type of glass, called nanoglass, is obtained. Such glasses seem to differ structurally from conventional glasses. (orig.)

  3. Solid Matter

    CERN Document Server

    Angelo, Joseph A

    2011-01-01

    Supported by a generous quantity of full-color illustrations and interesting sidebars, Solid Matter introduces the basic characteristics and properties of solid matter. It briefly describes the cosmic connection of the elements, leading readers through several key events in human pre-history that resulted in more advanced uses of matter in the solid state. Chapters include:. -Solid Matter: An Initial Perspective. -Physical Behavior of Matter. -The Gravity of Matter. -Fundamentals of Materials Science. -Rocks and Minerals. -Metals. -Building Materials. -Carbon Earth's Most Versatile Element. -S

  4. Metabolism and apoptotic properties of elevated ceramide in HT29(rev) cells

    NARCIS (Netherlands)

    Veldman, R J; Klappe, K; Hoekstra, D; Kok, J W

    1998-01-01

    Ceramide (Cer) has been implicated in the regulation of apoptosis. In this study, we elevated cellular Cer levels in human colon-carcinoma (HT29(rev)) cells by incubating the cells in the presence of bacterial sphingomyelinase (bSMase) or, alternatively, in the presence of C2-Cer, a short-chain

  5. 48 CFR 53.301-18 - SF 18 (Rev. 6/95), Request for Quotations.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false SF 18 (Rev. 6/95), Request for Quotations. 53.301-18 Section 53.301-18 Federal Acquisition Regulations System FEDERAL ACQUISITION... for Quotations. EC01MY91.002 [60 FR 34763, July 3, 1995] ...

  6. Determining the REV for Fracture Rock Mass Based on Seepage Theory

    Directory of Open Access Journals (Sweden)

    Lili Zhang

    2017-01-01

    Full Text Available Seepage problems of the fractured rock mass have always been a heated topic within hydrogeology and engineering geology. The equivalent porous medium model method is the main method in the study of the seepage of the fractured rock mass and its engineering application. The key to the method is to determine a representative elementary volume (REV. The FractureToKarst software, that is, discrete element software, is a main analysis tool in this paper and developed by a number of authors. According to the standard of rock classification established by ISRM, this paper aims to discuss the existence and the size of REV of fractured rock masses with medium tractility and provide a general method to determine the existence of REV. It can be gleaned from the study that the existence condition of fractured rock mass with medium tractility features average fracture spacing smaller than 0.6 m. If average fracture spacing is larger than 0.6 m, there is no existence of REV. The rationality of the model is verified by a case study. The present research provides a method for the simulation of seepage field in fissured rocks.

  7. On the use of polarization modulation in combined interferometry and polarimetry. Corrigendum. 1998 Plasma Phys. Control. Fusion, v. 40 p. 153-161

    International Nuclear Information System (INIS)

    Segre, S.E.

    1998-01-01

    Errors in the main text, the appendix and two curves are corrected in this corrigendum to the paper entitled ''On the use of polarization modulation in combined interferometry and polarimetry'', written by S.E. Segre and published in 1998 Plasma Phys. Control. Fusion, v. 40 p. 153-161

  8. Comment on 'Wave functions for a Duffin-Kemmer-Petiau particle in a time-dependent potential' [J. Math. Phys. 48, 073515 (2007)

    International Nuclear Information System (INIS)

    Castro, L. B.; Castro, A. S. de

    2010-01-01

    It is shown that the paper 'Wave functions for a Duffin-Kemmer-Petiau particle in a time-dependent potential' by Merad and Bensaid [J. Math. Phys. 48, 073515 (2007)] is not correct in using inadvertently a non-Hermitian Hamiltonian in a formalism that does require Hermitian Hamiltonians.

  9. Comment on open-quote open-quote Bohm criterion for the collisional sheath close-quote close-quote [Phys. Plasmas 3, 1459 (1996)

    International Nuclear Information System (INIS)

    Riemann, K.U.; Meyer, P.

    1996-01-01

    Recently, Valentini [Phys. Plasmas 3, 1459 (1996)] investigated the influence of collisions on the space charge formation and derived a modified Bohm criterion accounting for collisions in the sheath. It is shown that this derivation is wrong and is based on a misinterpretation of the plasma sheath concept. copyright 1996 American Institute of Physics

  10. Comment on: Path integral solution of the Schroedinger equation in curvilinear coordinates: A straightforward procedure [J. Math. Phys. 37, 4310 endash 4319 (1996)

    International Nuclear Information System (INIS)

    Wurm, A.; LaChapelle, J.

    1997-01-01

    The authors comment on the paper by J. LaChapelle, J. Math. Phys. 37, 4310 (1996), and give explicit expressions for the parametrization, its solution, and the Lie derivatives of the Schroedinger equation for the case of n-dimensional spherical coordinates

  11. Erratum: Laser-Induced Graphite Plasma Kinetic Spectroscopy under Different Ambient Pressures [Chin. Phys. Lett. Vol. 32, No. 4, 043201(2015)

    International Nuclear Information System (INIS)

    Chaudhary, K.; Rosalan, S.; Aziz, M. S.; Bahadoran, M.; Ali, J; Bidin, N.; Saktioto; Yupapin, P. P.

    2015-01-01

    There is a typewriting mistake in our previous report [Chin. Phys. Lett. 32, 4 (2015) 043201], the name of the fourth author M. Bohadoran should be M. Bahadoran. We note that this mistake does not affect the conclusion of our report, and apologize for any inconvenience for readers caused by our oversight. (paper)

  12. Erratum to “Neutron–19C scattering: Emergence of universal properties in a finite range potential” [Phys. Lett. B 764 (2017 196

    Directory of Open Access Journals (Sweden)

    M.A. Shalchi

    2017-08-01

    Full Text Available Numerical results for the function (1−EK/E0kcot⁡δ0R, as given in Phys. Lett. B 764 (2017 196, are revised. Fig. 2 and Tables 2 and 3 should be replaced by the following corresponding figure and tables. The conclusions of the original paper remain unchanged.

  13. Identification of Small Molecule Translesion Synthesis Inhibitors That Target the Rev1-CT/RIR Protein-Protein Interaction.

    Science.gov (United States)

    Sail, Vibhavari; Rizzo, Alessandro A; Chatterjee, Nimrat; Dash, Radha C; Ozen, Zuleyha; Walker, Graham C; Korzhnev, Dmitry M; Hadden, M Kyle

    2017-07-21

    Translesion synthesis (TLS) is an important mechanism through which proliferating cells tolerate DNA damage during replication. The mutagenic Rev1/Polζ-dependent branch of TLS helps cancer cells survive first-line genotoxic chemotherapy and introduces mutations that can contribute to the acquired resistance so often observed with standard anticancer regimens. As such, inhibition of Rev1/Polζ-dependent TLS has recently emerged as a strategy to enhance the efficacy of first-line chemotherapy and reduce the acquisition of chemoresistance by decreasing tumor mutation rate. The TLS DNA polymerase Rev1 serves as an integral scaffolding protein that mediates the assembly of the active multiprotein TLS complexes. Protein-protein interactions (PPIs) between the C-terminal domain of Rev1 (Rev1-CT) and the Rev1-interacting region (RIR) of other TLS DNA polymerases play an essential role in regulating TLS activity. To probe whether disrupting the Rev1-CT/RIR PPI is a valid approach for developing a new class of targeted anticancer agents, we designed a fluorescence polarization-based assay that was utilized in a pilot screen for small molecule inhibitors of this PPI. Two small molecule scaffolds that disrupt this interaction were identified, and secondary validation assays confirmed that compound 5 binds to Rev1-CT at the RIR interface. Finally, survival and mutagenesis assays in mouse embryonic fibroblasts and human fibrosarcoma HT1080 cells treated with cisplatin and ultraviolet light indicate that these compounds inhibit mutagenic Rev1/Polζ-dependent TLS in cells, validating the Rev1-CT/RIR PPI for future anticancer drug discovery and identifying the first small molecule inhibitors of TLS that target Rev1-CT.

  14. Molecular typing of Brucella melitensis endemic strains and differentiation from the vaccine strain Rev-1.

    Science.gov (United States)

    Noutsios, Georgios T; Papi, Rigini M; Ekateriniadou, Loukia V; Minas, Anastasios; Kyriakidis, Dimitrios A

    2012-03-01

    In the present study forty-four Greek endemic strains of Br. melitensis and three reference strains were genotyped by Multi locus Variable Number Tandem Repeat (ML-VNTR) analysis based on an eight-base pair tandem repeat sequence that was revealed in eight loci of Br. melitensis genome. The forty-four strains were discriminated from the vaccine strain Rev-1 by Restriction Fragment Length Polymorphism (RFLP) and Denaturant Gradient Gel Electrophoresis (DGGE). The ML-VNTR analysis revealed that endemic, reference and vaccine strains are genetically closely related, while most of the loci tested (1, 2, 4, 5 and 7) are highly polymorphic with Hunter-Gaston Genetic Diversity Index (HGDI) values in the range of 0.939 to 0.775. Analysis of ML-VNTRs loci stability through in vitro passages proved that loci 1 and 5 are non stable. Therefore, vaccine strain can be discriminated from endemic strains by allele's clusters of loci 2, 4, 6 and 7. RFLP and DGGE were also employed to analyse omp2 gene and reveled different patterns among Rev-1 and endemic strains. In RFLP, Rev-1 revealed three fragments (282, 238 and 44 bp), while endemic strains two fragments (238 and 44 bp). As for DGGE, the electrophoretic mobility of Rev-1 is different from the endemic strains due to heterologous binding of DNA chains of omp2a and omp2b gene. Overall, our data show clearly that it is feasible to genotype endemic strains of Br. melitensis and differentiate them from vaccine strain Rev-1 with ML-VNTR, RFLP and DGGE techniques. These tools can be used for conventional investigations in brucellosis outbreaks.

  15. Hard bottom substrate monitoring Horns Rev offshore wind farm. Annual status report 2003

    Energy Technology Data Exchange (ETDEWEB)

    Leonhard, S.B.; Pedersen, John

    2004-05-15

    Elsam and Eltra built the offshore demonstration wind farm at Horns Rev in the North Sea. Elsam is the owner and is responsible for the operation of the wind farm. Eltra is responsible for the connection of the wind farm to the national onshore grid. In the summer months of 2002, Elsam constructed the world's largest offshore wind farm off the Danish west coast. The wind farm is sited 14-20 km into the North Sea, west of Blaevands Huk. The first wind turbine was erected in May 2002 and the last wind turbine tower of a total of 80 was in place by August 2002. The construction work was completed with the last connecting cables sluiced down in September 2002. All the wind turbines were in production by December 2002. The expected impact of the wind farm will primarily be an alternation of habitats due to the introduction of hard bottom substrates as wind turbine towers and scour protections. A continuous development in the epifouling communities will be expected together with an introduction of new or alien species in the area. The indigenous benthic community in the area of Horns Rev can be characterised by infauna species belonging to the Goniadella-Spisula community. This community is typical of sandbanks in the North Sea area, although communities in such areas are very variable and site-specific. Character species used as indicators for environmental changes in the Horns Rev area are the bristle worms Goniadella bobretzkii, Ophelia borealis, Psione remota and Orbinia sertulata and the mussels Goodallia triangularis and Spisula solida. In connection with the implementation of the monitoring programme concerning the ecological impact of the introduction of hard substrate related to the Horns Rev Wind Farm, surveys on hard bottom substrate was conducted in March 2003 and in September 2003. This report describes the first year results of surveys on hard substrate after the completion of the offshore wind farm at Horns Rev. (au)

  16. Solid waste

    International Nuclear Information System (INIS)

    1995-01-01

    The article drawn up within the framework of 'the assessment of the state of the environment in Lebanon' provides an overview of solid waste management, and assesses future wastes volume and waste disposal issues.In particular it addresses the following concerns: - Long term projections of solid waste arisings (i.e. domestic, industrial, such commercial wastes, vehicle types, construction waste, waste oils, hazardous toxic wastes and finally hospital and clinical wastes) are described. - Appropriate disposal routes, and strategies for reducing volumes for final disposal - Balance between municipal and industrial solid waste generation and disposal/treatment and - environmental impacts (aesthetics, human health, natural environment )of existing dumps, and the potential impact of government plans for construction of solid waste facilities). Possible policies for institutional reform within the waste management sector are proposed. Tables provides estimations of generation rates and distribution of wastes in different regions of Lebanon. Laws related to solid waste management are summarized

  17. Offshore wind farms in the local community - a survey at Horns Rev wind farm. Background report; Havvindmoeller i lokalomraedet - en undersoegelse ved Horns Rev havmoellepark. Baggrundsrapport

    Energy Technology Data Exchange (ETDEWEB)

    Kuehn, S.

    2005-07-15

    This report is part of a socio-economic project about offshore wind farms' influence on the local community. The project is part of the monitoring programme in connection with the establishment of the offshore wind farms at Horns Rev and Nysted. The socio-economic project consists of a sociological and an environment-economic project. This report is part of the sociological project which has the purpose of identifying attitudes towards the wind farm before and after the erection with a view to identify possible changes in opinions and reasons for these changes. (BA)

  18. Disentangled solid state and metastable polymer melt; a solvent free route to high-modulus high-strength tapes and films of UHMWPE

    Science.gov (United States)

    Rastogi, Sanjay

    2013-03-01

    Ultra High Molecular Weight Polyethylene (UHMWPE) having average molar mass greater than a million g/mol is an engineering polymer. Due to its light-weight, high abrasion resistance and biocompatibility it is used for demanding applications such as body armour, prostheses etc. At present, because of its high melt viscosity to achieve the uniaxial/biaxial properties in the form of fibers/films the polymer is processed via solution route where nearly 95wt% of the solvent is used to process 5wt% of the polymer. In past several attempts have been made to process the polymer without using any solvent. However, compared to the solvent processing route the achieved mechanical properties were rather poor. Here we show that by controlled synthesis it is feasible to obtain UHMWPE that could be processed free of solvent to make uniaxial tapes and biaxial films, having unprecedented mechanical properties, exceeding that of the solution spun fibers. We address some of the fundamental aspects of chemistry, physics, rheology and processing for the development of desired morphological features to achieve the ultimate mechanical properties in tapes and films. The paper will also address the metastable melt state obtained on melting of the disentangled crystals and its implication on rheology in linear and nonlinear viscoelastic region. Solid state NMR studies will be applied to establish disentangled state in solid state to the polymerisation conditions. References: Macromolecules 2011, 44(14), 5558-5568; Nature Materials 2005, 4, 635-641; Phys Rev Lett 2006, 96(21), 218303-218205. The authors acknowledge financial support by the Dutch Polymer Institute.

  19. MicroRNA-340 inhibits the proliferation and promotes the apoptosis of colon cancer cells by modulating REV3L

    Science.gov (United States)

    Arivazhagan, Roshini; Lee, Jaesuk; Bayarsaikhan, Delger; Kwak, Peter; Son, Myeongjoo; Byun, Kyunghee; Salekdeh, Ghasem Hosseini; Lee, Bonghee

    2018-01-01

    DNA Directed Polymerase Zeta Catalytic Subunit (REV3L) has recently emerged as an important oncogene. Although the expressions of REV3L are similar in normal and cancer cells, several mutations in REV3L have been shown to play important roles in cancer. These mutations cause proteins misfolding and mislocalization, which in turn alters their interactions and biological functions. miRNAs play important regulatory roles during the progression and metastasis of several human cancers. This study was undertaken to determine how changes in the location and interactions of REV3L regulate colon cancer progression. REV3L protein mislocalization confirmed from the immunostaining results and the known interactions of REV3L was found to be broken as seen from the PLA assay results. The mislocalized REV3L might interact with new proteins partners in the cytoplasm which in turn may play role in regulating colon cancer progression. hsa-miR-340 (miR-340), a microRNA down-regulated in colon cancer, was used to bind to and downregulate REV3L, and found to control the proliferation and induce the apoptosis of colon cancer cells (HCT-116 and DLD-1) via the MAPK pathway. Furthermore, this down-regulation of REV3L also diminished colon cancer cell migration, and down-regulated MMP-2 and MMP-9. Combined treatment of colon cancer cells with miR-340 and 5-FU enhanced the inhibitory effects of 5-FU. In addition, in vivo experiments conducted on nude mice revealed tumor sizes were smaller in a HCT-116-miR-340 injected group than in a HCT-116-pCMV injected group. Our findings suggest mutations in REV3L causes protein mislocalization to the cytoplasm, breaking its interaction and is believed to form new protein interactions in cytoplasm contributing to colon cancer progression. Accordingly, microRNA-340 appears to be a good candidate for colon cancer therapy. PMID:29435169

  20. Identification of Brucella melitensis Rev.1 vaccine-strain genetic markers: Towards understanding the molecular mechanism behind virulence attenuation.

    Science.gov (United States)

    Issa, Mohammad Nouh; Ashhab, Yaqoub

    2016-09-22

    Brucella melitensis Rev.1 is an avirulent strain that is widely used as a live vaccine to control brucellosis in small ruminants. Although an assembled draft version of Rev.1 genome has been available since 2009, this genome has not been investigated to characterize this important vaccine. In the present work, we used the draft genome of Rev.1 to perform a thorough genomic comparison and sequence analysis to identify and characterize the panel of its unique genetic markers. The draft genome of Rev.1 was compared with genome sequences of 36 different Brucella melitensis strains from the Brucella project of the Broad Institute of MIT and Harvard. The comparative analyses revealed 32 genetic alterations (30 SNPs, 1 single-bp insertion and 1 single-bp deletion) that are exclusively present in the Rev.1 genome. In silico analyses showed that 9 out of the 17 non-synonymous mutations are deleterious. Three ABC transporters are among the disrupted genes that can be linked to virulence attenuation. Out of the 32 mutations, 11 Rev.1 specific markers were selected to test their potential to discriminate Rev.1 using a bi-directional allele-specific PCR assay. Six markers were able to distinguish between Rev.1 and a set of control strains. We succeeded in identifying a panel of 32 genome-specific markers of the B. melitensis Rev.1 vaccine strain. Extensive in silico analysis showed that a considerable number of these mutations could severely affect the function of the associated genes. In addition, some of the discovered markers were able to discriminate Rev.1 strain from a group of control strains using practical PCR tests that can be applied in resource-limited settings. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. iNR-PhysChem: a sequence-based predictor for identifying nuclear receptors and their subfamilies via physical-chemical property matrix.

    Directory of Open Access Journals (Sweden)

    Xuan Xiao

    Full Text Available Nuclear receptors (NRs form a family of ligand-activated transcription factors that regulate a wide variety of biological processes, such as homeostasis, reproduction, development, and metabolism. Human genome contains 48 genes encoding NRs. These receptors have become one of the most important targets for therapeutic drug development. According to their different action mechanisms or functions, NRs have been classified into seven subfamilies. With the avalanche of protein sequences generated in the postgenomic age, we are facing the following challenging problems. Given an uncharacterized protein sequence, how can we identify whether it is a nuclear receptor? If it is, what subfamily it belongs to? To address these problems, we developed a predictor called iNR-PhysChem in which the protein samples were expressed by a novel mode of pseudo amino acid composition (PseAAC whose components were derived from a physical-chemical matrix via a series of auto-covariance and cross-covariance transformations. It was observed that the overall success rate achieved by iNR-PhysChem was over 98% in identifying NRs or non-NRs, and over 92% in identifying NRs among the following seven subfamilies: NR1--thyroid hormone like, NR2--HNF4-like, NR3--estrogen like, NR4--nerve growth factor IB-like, NR5--fushi tarazu-F1 like, NR6--germ cell nuclear factor like, and NR0--knirps like. These rates were derived by the jackknife tests on a stringent benchmark dataset in which none of protein sequences included has ≥60% pairwise sequence identity to any other in a same subset. As a user-friendly web-server, iNR-PhysChem is freely accessible to the public at either http://www.jci-bioinfo.cn/iNR-PhysChem or http://icpr.jci.edu.cn/bioinfo/iNR-PhysChem. Also a step-by-step guide is provided on how to use the web-server to get the desired results without the need to follow the complicated mathematics involved in developing the predictor. It is anticipated that iNR-PhysChem may

  2. Order-parameter-aided temperature-accelerated sampling for the exploration of crystal polymorphism and solid-liquid phase transitions

    International Nuclear Information System (INIS)

    Yu, Tang-Qing; Vanden-Eijnden, Eric; Chen, Pei-Yang; Chen, Ming; Samanta, Amit; Tuckerman, Mark

    2014-01-01

    The problem of predicting polymorphism in atomic and molecular crystals constitutes a significant challenge both experimentally and theoretically. From the theoretical viewpoint, polymorphism prediction falls into the general class of problems characterized by an underlying rough energy landscape, and consequently, free energy based enhanced sampling approaches can be brought to bear on the problem. In this paper, we build on a scheme previously introduced by two of the authors in which the lengths and angles of the supercell are targeted for enhanced sampling via temperature accelerated adiabatic free energy dynamics [T. Q. Yu and M. E. Tuckerman, Phys. Rev. Lett. 107, 015701 (2011)]. Here, that framework is expanded to include general order parameters that distinguish different crystalline arrangements as target collective variables for enhanced sampling. The resulting free energy surface, being of quite high dimension, is nontrivial to reconstruct, and we discuss one particular strategy for performing the free energy analysis. The method is applied to the study of polymorphism in xenon crystals at high pressure and temperature using the Steinhardt order parameters without and with the supercell included in the set of collective variables. The expected fcc and bcc structures are obtained, and when the supercell parameters are included as collective variables, we also find several new structures, including fcc states with hcp stacking faults. We also apply the new method to the solid-liquid phase transition in copper at 1300 K using the same Steinhardt order parameters. Our method is able to melt and refreeze the system repeatedly, and the free energy profile can be obtained with high efficiency

  3. Response to Comment on 'On Higher-Order Corrections to Gyrokinetic Vlasov-Poisson Equations in the Long Wavelength Limit [Phys. Plasmas 16,044506 (2009)]'

    International Nuclear Information System (INIS)

    Lee, W.W.; Kolesnikov, R.A.

    2009-01-01

    We show in this Response that the nonlinear Poisson's equation in our original paper derived from the drift kinetic approach can be verified by using the nonlinear gyrokinetic Poisson's equation of Dubin et al. (Phys. Fluids 26, 3524 (1983)). This nonlinear contribution in φ 2 is indeed of the order of k # perpendicular# 4 in the long wavelength limit and remains finite for zero ion temperature, in contrast to the nonlinear term by Parra and Catto (Plasma Phys. Control. Fusion 50, 065014 (2008)), which is of the order of k # perpendicular# 2 and diverges for T i → 0. For comparison, the leading term for the gyrokinetic Poisson's equation in this limit is of the order of k # perpendicular# 2 φ.

  4. Administrative Cicular No. 31 (Rev. 2) - International indemnity and non-resident allowance

    CERN Multimedia

    Department Head Office - HR Department

    2016-01-01

    Administrative Circular No. 31 (Rev. 2) entitled "International indemnity and non-resident allowance", approved by the Director-General following discussion in the Standing Concertation Committee meeting on 23 June 2016, will be available on 1st September 2016 via the following link: https://cds.cern.ch/record/2208547.   This revised circular cancels and replaces Administrative Circular No. 31 (Rev. 1) also entitled "International indemnity and non-resident allowance" of October 2007. The main changes reflect the decision taken in the framework of the five-yearly review to extend eligibility for international indemnity to all staff members, as well to introduce a distinction between current staff members and those recruited as from 1st September 2016. For the latter, the international indemnity will be calculated as a percentage of the minimum salary of the grade into which they are recruited; the amount granted to the former will not change, and is now expressed ...

  5. Administrative Circular No. 11 (Rev. 3) - Categories of members of the personnel

    CERN Multimedia

    2014-01-01

    Administrative Circular No. 11 (Rev. 3) entitled “Categories of members of the personnel”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 3 July 2014 and entering into force on 1 September 2014, is available on the intranet site of the Human Resources Department.   This circular is applicable to all members of the personnel. It cancels and replaces Administrative Circular No. 11 (Rev. 2) entitled “Categories of members of the personnel” of January 2013. The circular was revised in order to include a minor adjustment of the determination of required period of break in the payment of subsistence allowance to certain categories of associated members of the personnel (taking account of possible technical means of control). Furthermore, the possibility of traineeships of long duration was restricted to cases in which the traineeship is awarded pursuant to an agreement between CERN and a...

  6. Administrative Circular No. 13 (Rev. 3) - Guarantees for representatives of the personnel

    CERN Multimedia

    2014-01-01

    Administrative Circular No. 13 (Rev. 3) entitled “Guarantees for representatives of the personnel”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 5 December 2013 and entering into force on 1 January 2014, is available on the intranet site of the Human Resources Department (see here).   This circular is applicable to all members of the personnel. It cancels and replaces Administrative Circular No. 13 (Rev. 2) entitled “Guarantees for members of the personnel holding representative office” of November 1992. The circular was revised in order to adapt the time given to the representatives of the personnel to perform their elective mandate and to ensure more transparency in their activities, by indicating, inter alia, the percentage of time worked in the framework of their mandate, as well as the training, activities and ensuing results. Department Head Office HR Department

  7. Administrative circular n°23 (Rev. 3) – Special working hours

    CERN Multimedia

    2013-01-01

    Administrative Circular No. 23 (Rev. 3) entitled “Special working hours”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 11 October 2012 and entering into force on 1 January 2013, is available on the intranet site of the Human Resources Department.   This circular is applicable to staff members and fellows. It cancels and replaces Administrative Circular No. 23 (Rev. 2) entitled “Special working hours” of December 2008. Paragraph 6 a) of Annex II of this circular was revised following the modification of Article III 1.04 of the Staff Regulations approved by Council on 14 December 2012. The modification serves to adapt the minimum rest time to the fact that, in case of rapidly alternating shifts, a maximum of seven consecutive shifts may be performed. Department Head Office HR Department

  8. Administrative circular n°11 (REV. 2) – Categories of members of the personnel

    CERN Multimedia

    2012-01-01

    Administrative Circular No. 11 (Rev. 2) entitled “Categories of members of the personnel”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 11 May 2012 and entering into force on 1 January 2013, is available on the intranet site of the Human Resources Department. This circular is applicable to all members of the personnel. It cancels and replaces Administrative Circular No. 11 (Rev. 1) entitled “Categories of members of the personnel” of January 1997 as regards all contracts of members of the personnel issued on or after 1 January 2013. The circular was revised in order to take into account developments since the last revision of the categories of personnel in 1997 as well as the needs of the Organization and collaborating institutes. In particular, it introduces a new system for distinguishing categories of associated members of the personnel, namely with regard to the purpo...

  9. Administrative circular No. 20 (Rev. 2) – Use of private vehicules for journeys on official duty

    CERN Multimedia

    HR Department

    2011-01-01

    Administrative Circular No. 20 (Rev. 2) entitled "Use of private vehicles for journeys on official duty", adopted following discussion in the Standing Concertation Committee meeting of 21 September 2010 and entering into force on 1 January 2011, is available on the intranet site of the Human Resources Department: http://cern.ch/hr-docs/admincirc/admincirc.asp It cancels and replaces Administrative Circular No. 20 (Rev. 1) entitled "Use of private vehicles on official duty" of April 1993. This new version introduces, in particular, the payment of a kilometer allowance in case of emergency during standby duty or when on call and a simplified calculation of the allowance for journeys between sites. This circular also clarifies the type of permitted private vehicles. Department Head Office  

  10. Corrigendum to ;Lotka-Volterra systems satisfying a strong Painlevé property; [Phys. Lett. A 380 (47) (2016) 3977-3982

    Science.gov (United States)

    Bountis, Tassos; Vanhaecke, Pol

    2017-12-01

    The comment made after the proof of Proposition 3.3, in our paper [T. Bountis, P. Vanhaecke, Lotka-Volterra systems satisfying a strong Pailevé property, Phys. Lett. A 380 (47) (2016) 3977-3982], saying that the proposition can be generalized when linear terms are added to the Lotka-Volterra systems considered in the paper, is wrong. In general such deformed systems are not even Hamiltonian.

  11. Rev and Rex proteins of human complex retroviruses function with the MMTV Rem-responsive element

    Directory of Open Access Journals (Sweden)

    Dudley Jaquelin P

    2009-02-01

    Full Text Available Abstract Background Mouse mammary tumor virus (MMTV encodes the Rem protein, an HIV Rev-like protein that enhances nuclear export of unspliced viral RNA in rodent cells. We have shown that Rem is expressed from a doubly spliced RNA, typical of complex retroviruses. Several recent reports indicate that MMTV can infect human cells, suggesting that MMTV might interact with human retroviruses, such as human immunodeficiency virus (HIV, human T-cell leukemia virus (HTLV, and human endogenous retrovirus type K (HERV-K. In this report, we test whether the export/regulatory proteins of human complex retroviruses will increase expression from vectors containing the Rem-responsive element (RmRE. Results MMTV Rem, HIV Rev, and HTLV Rex proteins, but not HERV-K Rec, enhanced expression from an MMTV-based reporter plasmid in human T cells, and this activity was dependent on the RmRE. No RmRE-dependent reporter gene expression was detectable using Rev, Rex, or Rec in HC11 mouse mammary cells. Cell fractionation and RNA quantitation experiments suggested that the regulatory proteins did not affect RNA stability or nuclear export in the MMTV reporter system. Rem had no demonstrable activity on export elements from HIV, HTLV, or HERV-K. Similar to the Rem-specific activity in rodent cells, the RmRE-dependent functions of Rem, Rev, or Rex in human cells were inhibited by a dominant-negative truncated nucleoporin that acts in the Crm1 pathway of RNA and protein export. Conclusion These data argue that many retroviral regulatory proteins recognize similar complex RNA structures, which may depend on the presence of cell-type specific proteins. Retroviral protein activity on the RmRE appears to affect a post-export function of the reporter RNA. Our results provide additional evidence that MMTV is a complex retrovirus with the potential for viral interactions in human cells.

  12. Effects on birds of an offshore wind park at Horns Rev: Environmental impact assessment

    Energy Technology Data Exchange (ETDEWEB)

    Noer, H.; Kjaer Christensen, T.; Clausager, I.; Krag Petersen, I. [DMU, Dept. of Coastal Zone Ecology (Denmark)

    2000-07-01

    This report presents the technical background to the ornithological environmental impact assessment for the construction of an offshore windpark at Horns Rev, 14 km west-south-west of Blaevandshuk, Denmark. Construction of the park is planned to commence in 2001. The park will consist of c. 80 wind turbines, each of at least 1.8 MW, and cover an area of 27.5 km{sup 2} (including the 200 m exclusion zone around the park). (au)

  13. Determination of Geometrical REVs Based on Volumetric Fracture Intensity and Statistical Tests

    Directory of Open Access Journals (Sweden)

    Ying Liu

    2018-05-01

    Full Text Available This paper presents a method to estimate a representative element volume (REV of a fractured rock mass based on the volumetric fracture intensity P32 and statistical tests. A 150 m × 80 m × 50 m 3D fracture network model was generated based on field data collected at the Maji dam site by using the rectangular window sampling method. The volumetric fracture intensity P32 of each cube was calculated by varying the cube location in the generated 3D fracture network model and varying the cube side length from 1 to 20 m, and the distribution of the P32 values was described. The size effect and spatial effect of the fractured rock mass were studied; the P32 values from the same cube sizes and different locations were significantly different, and the fluctuation in P32 values clearly decreases as the cube side length increases. In this paper, a new method that comprehensively considers the anisotropy of rock masses, simplicity of calculation and differences between different methods was proposed to estimate the geometrical REV size. The geometrical REV size of the fractured rock mass was determined based on the volumetric fracture intensity P32 and two statistical test methods, namely, the likelihood ratio test and the Wald–Wolfowitz runs test. The results of the two statistical tests were substantially different; critical cube sizes of 13 m and 12 m were estimated by the Wald–Wolfowitz runs test and the likelihood ratio test, respectively. Because the different test methods emphasize different considerations and impact factors, considering a result that these two tests accept, the larger cube size, 13 m, was selected as the geometrical REV size of the fractured rock mass at the Maji dam site in China.

  14. Hard bottom substrate monitoring Horns Rev offshore wind farm. Annual status report. 2004

    Energy Technology Data Exchange (ETDEWEB)

    Leonhard, S.B.; Pedersen, John

    2005-05-15

    Elsam and Eltra have built the offshore demonstration wind farm at Horns Rev in the North Sea. Elsam is the owner and is responsible for the operation of the wind farm. Eltra is responsible for the connection of the wind farm to the national onshore grid. In the summer months of 2002, Elsam constructed the world's largest offshore wind farm at the Danish west coast. The wind farm is located 14-20 km into the North Sea, west of Blaevands Huk. The first wind turbine foundation was in place in March 2002 and the last mono-pile was in place in August 2002 for a total of 80. The construction work was completed with the last connecting cables sluiced down in September 2002. All the wind turbines were in production in December 2002. The expected impact from the wind farm will primarily be an alternation of habitats due to the introduction of hard bottom substrates as wind mono-piles and scour protections. A continuous development in the epifouling communities will be expected together with an introduction of new or alien species in the area. The indigenous benthic community in the area of Horn Rev can be characterised by infauna species belonging to the Goniadella-Spisula community. This community is typical of sandbanks in the North Sea area, although communities in such areas are very variable and site specific. Character species used as indicators for environmental changes in the Horns Rev area are the bristle worms Goniadella bobretzkii, Ophelia borealis, Psione remota and Orbinia sertulata and the mussels Goodallia triangularis and Spisula solida. In connection with the implementation of the monitoring programme concerning the ecological impact of the introduction of hard substrate related to the Horns Rev Wind Farm, surveys on hard bottom substrates were initialised in March 2003 with monitoring conducted in September 2003 and March and September 2004. This report describes the results from surveys on hard substrates in 2004. (au)

  15. Hard bottom substrate monitoring Horns Rev offshore wind farm. Annual status report. 2004

    Energy Technology Data Exchange (ETDEWEB)

    Leonhard, S B; Pedersen, John

    2005-05-15

    Elsam and Eltra have built the offshore demonstration wind farm at Horns Rev in the North Sea. Elsam is the owner and is responsible for the operation of the wind farm. Eltra is responsible for the connection of the wind farm to the national onshore grid. In the summer months of 2002, Elsam constructed the world's largest offshore wind farm at the Danish west coast. The wind farm is located 14-20 km into the North Sea, west of Blaevands Huk. The first wind turbine foundation was in place in March 2002 and the last mono-pile was in place in August 2002 for a total of 80. The construction work was completed with the last connecting cables sluiced down in September 2002. All the wind turbines were in production in December 2002. The expected impact from the wind farm will primarily be an alternation of habitats due to the introduction of hard bottom substrates as wind mono-piles and scour protections. A continuous development in the epifouling communities will be expected together with an introduction of new or alien species in the area. The indigenous benthic community in the area of Horn Rev can be characterised by infauna species belonging to the Goniadella-Spisula community. This community is typical of sandbanks in the North Sea area, although communities in such areas are very variable and site specific. Character species used as indicators for environmental changes in the Horns Rev area are the bristle worms Goniadella bobretzkii, Ophelia borealis, Psione remota and Orbinia sertulata and the mussels Goodallia triangularis and Spisula solida. In connection with the implementation of the monitoring programme concerning the ecological impact of the introduction of hard substrate related to the Horns Rev Wind Farm, surveys on hard bottom substrates were initialised in March 2003 with monitoring conducted in September 2003 and March and September 2004. This report describes the results from surveys on hard substrates in 2004. (au)

  16. Losers, Food, and Sex. Clerical Masculinity in the BBC Sitcom Rev.

    Directory of Open Access Journals (Sweden)

    Alexander Ornella

    2016-11-01

    Full Text Available Clerical masculinities, much like their lay/secular counterparts, often appear unchang¬ing because they are the products of naturalization processes. Clerical masculinities, however, are far from stable, for they live and breathe the dynamics of both their socio-religious context and their secular “others”. The BBC sitcom Rev. (BBC2, UK 2010–2014 is a refreshing take on the everyday life and problems of a vicar in the Church of England trying to avoid stereotypes that often come with clerical roles. Rev. (2010–2014 can be interpreted as an attempt to explore the negotiation processes of masculinity within an institution that is involved in the “production” of religion and gender roles. It shows that being a man in an institutional setting is as much a perfor¬mance as it is a more or less successful negotiation of other people’s expectations and one’s own worldview. In particular, the main male clerical characters in Rev. (2010– 2014 inhabit a position of power but all have their flaws. They can best be understood as losers whose clash with masculine systems renders them more human.

  17. Guidance and considerations for implementation of INFCIRC/225/Rev.3, the physical protection of nuclear material

    International Nuclear Information System (INIS)

    1997-09-01

    The Physical Protection of Nuclear Material, INFCIRC/225/Rev.3, provides recommendations for the physical protection of nuclear material against theft in use, storage and transport, whether national or international and whether peaceful or military, and contains provisions relating to the sabotage of nuclear material or facilities. The recommendations contained in INFCIRC/225/Rev.3 detail the elements that should be included in a State's system of physical protection. It also recognizes the adverse health and safety consequences arising from the theft of nuclear material and the sabotage of nuclear material or facilities. Most industrial and developing countries use these recommendations to some extent in the establishment and operation of their physical protection systems. Although INFCIRC/225/Rev.3 provides recommendations for protecting materials and facilities from theft or sabotage, it does not provide in-depth details for these recommendations. In June 1996, the IAEA convened a consultants meeting to consider this matter. This report is the result of continuing discussions and drafts over a period of nine months. The intent of this guidance is to provide a broader basis for relevant State organizations to prescribe appropriate requirements for the use of nuclear materials which are compatible with accepted international practice

  18. Comment on 'Instability of the Shukla mode in a dusty plasma containing equilibrium density and magnetic field inhomogeneities' [Phys. Plasmas 11, 1732 (2004)] and 'New resonance and cut-off for low-frequency electromagnetic waves in dusty magnetoplasmas' [Phys. Plasmas 11, 2307 (2004)

    International Nuclear Information System (INIS)

    Rudakov, Leonid

    2004-01-01

    It is shown that the oscillation named by Shukla as the 'Shukla mode' is well known in the plasma physics literature as the magnetic drift wave. In addition, the instability of these modes in a cold plasma as claimed by Shukla et al. [Phys. Plasmas 11, 1732 (2004)] does not exist and is due to a mathematical error in their analysis. Also the 'new' resonance and new cutoff frequencies claimed by Shukla et al. and Mamum et al. [Phys Plasmas 11, 2307 (2004)] have been known in the published literature for decades

  19. Solid electrolytes

    Science.gov (United States)

    Abraham, Kuzhikalail M.; Alamgir, Mohamed

    1993-06-15

    This invention pertains to Li ion (Li.sup.+) conductive solid polymer electrolytes composed of solvates of Li salts immobilized (encapsulated) in a solid organic polymer matrix. In particular, this invention relates to solid polymer electrolytes derived by immobilizing complexes (solvates) formed between a Li salt such as LiAsF.sub.6, LiCF.sub.3 SO.sub.3 or LiClO.sub.4 and a mixture of aprotic organic solvents having high dielectric constants such as ethylene carbonate (EC) (dielectric constant=89.6) and propylene carbonate (PC) (dielectric constant=64.4) in a polymer matrix such as polyacrylonitrile, poly(tetraethylene glycol diacrylate), or poly(vinyl pyrrolidinone).

  20. Status report of seabird surveys at Horns Rev, 2000-2001

    International Nuclear Information System (INIS)

    Kjaer Christensen, T.; Clausager, I.; Krag Petersen, I.

    2002-01-01

    The present report presents the results of three bird surveys conducted in the Horns Rev area during the second half of 2001. Due to poor weather conditions in December 2001, the last survey was, however, performed on 7 January 2002. The surveys are part of the base-line investigations of birds performed in relation to the proposed construction of an offshore wind farm at Horns Rev in the Danish part of the North Sea ca 14 km southwest of Blaevandshuk. The results of the surveys during August 2001 - January 2002 are presented together with the results obtained during the period August 2000 - April 2001, and are also compared to results obtained during the period August 1999 - April 2000. Based on the distribution of the most abundant bird species recorded during 16 aerial surveys performed during August 1999 - January 2002, there were no indications that the wind farm area was of any particular importance to the birds' exploitation of the Horns Rev area. Fish-eating species like divers, gannet, terns, auks and gulls generally showed scattered and variable distributions, mainly occurring in the areas north and south of Horns Rev, and with low numbers on the reef proper and within the planned wind farm area. The distribution of benthic foraging species, eider and common Scoter, showed that they mainly exploited the coastal parts of the area off Blaevandshuk and Skallingen, although common scoter was found in relatively high numbers on the southeast slopes of the Horns Rev and within the wind farm area in the April 2001 survey. Common scoters occurred in very high numbers in January 2002. This was probably related to increased immigration of birds from the inner Danish waters during a cold period in late December 2001. Preference analyses of bird exploitation of the Horns Rev area showed that if the birds completely avoid the wind farm area after erection of the wind turbines, this will affect less than 1% of the various species, except divers where 1.58% will be

  1. Empirical tight-binding parameters for solid C60

    International Nuclear Information System (INIS)

    Tit, N.; Kumar, V.

    1993-01-01

    We present a tight-binding model for the electronic structure of C 60 using four (1s and 3p) orbitals per carbon atom. The model has been developed by fitting the tight-binding parameters to the ab-initio pseudopotential calculation of Troullier and Martins (Phys. Rev. B46, 1754 (1992)) in the face-centered cubic (Fm3-bar) phase. Following this, calculations of the energy bands and the density of electronic states have been carried out as a function of the lattice constant. Good agreement has been obtained with the observed lattice-constant dependence of T c using McMillan's formula. Furthermore, calculations of the electronic structure are presented in the simple cubic (Pa3-bar) phase. (author). 43 refs, 3 figs, 1 tab

  2. DC Brushless Motor Control Design and Preliminary Testing for Independent 4-Wheel Drive Rev-11 Robotic Platform

    Directory of Open Access Journals (Sweden)

    Roni Permana Saputra

    2012-03-01

    Full Text Available This paper discusses the design of control system for brushless DC motor using microcontroller ATMega 16 that will be applied to an independent 4-wheel drive Mobile Robot LIPI version 2 (REV-11. The control system consists of two parts which are brushless DC motor control module and supervisory control module that coordinates the desired command to the motor control module. To control the REV-11 platform, supervisory control transmit the reference data of speed and direction of motor to control the speed and direction of each actuator on the platform REV-11. From the test results it is concluded that the designed control system work properly to coordinate and control the speed and direction of motion of the actuator motor REV-11 platform. 

  3. Local yield stress statistics in model amorphous solids

    Science.gov (United States)

    Barbot, Armand; Lerbinger, Matthias; Hernandez-Garcia, Anier; García-García, Reinaldo; Falk, Michael L.; Vandembroucq, Damien; Patinet, Sylvain

    2018-03-01

    We develop and extend a method presented by Patinet, Vandembroucq, and Falk [Phys. Rev. Lett. 117, 045501 (2016), 10.1103/PhysRevLett.117.045501] to compute the local yield stresses at the atomic scale in model two-dimensional Lennard-Jones glasses produced via differing quench protocols. This technique allows us to sample the plastic rearrangements in a nonperturbative manner for different loading directions on a well-controlled length scale. Plastic activity upon shearing correlates strongly with the locations of low yield stresses in the quenched states. This correlation is higher in more structurally relaxed systems. The distribution of local yield stresses is also shown to strongly depend on the quench protocol: the more relaxed the glass, the higher the local plastic thresholds. Analysis of the magnitude of local plastic relaxations reveals that stress drops follow exponential distributions, justifying the hypothesis of an average characteristic amplitude often conjectured in mesoscopic or continuum models. The amplitude of the local plastic rearrangements increases on average with the yield stress, regardless of the system preparation. The local yield stress varies with the shear orientation tested and strongly correlates with the plastic rearrangement locations when the system is sheared correspondingly. It is thus argued that plastic rearrangements are the consequence of shear transformation zones encoded in the glass structure that possess weak slip planes along different orientations. Finally, we justify the length scale employed in this work and extract the yield threshold statistics as a function of the size of the probing zones. This method makes it possible to derive physically grounded models of plasticity for amorphous materials by directly revealing the relevant details of the shear transformation zones that mediate this process.

  4. Comment on “Shape transition of unstrained flattest single-walled carbon nanotubes under pressure” [J. Appl. Phys. 115, 044512 (2014)

    Energy Technology Data Exchange (ETDEWEB)

    Vassilev, Vassil M., E-mail: vasilvas@imbm.bas.bg; Djondjorov, Peter A., E-mail: padjon@imbm.bas.bg [Institute of Mechanics, Bulgarian Academy of Sciences Acad. G. Bonchev Str., Block 4, Sofia 1113 (Bulgaria); Mladenov, Ivaïlo M., E-mail: mladenov@bio21.bas.bg [Institute of Biophysics and Biomedical Engineering, Bulgarian Academy of Sciences Acad. G. Bonchev Str., Block 21, Sofia 1113 (Bulgaria)

    2015-05-21

    Recently, Mu et al. [J. Appl. Phys. 115, 044512 (2014)] have developed an analytic approach to describe some special shapes of a single-wall carbon nanotube (SWCNT) under hydrostatic pressure. These authors have found approximate analytic expressions for the parametric equations of the tube cross section profile and its curvature at the convex-to-concave transition pressure using a shell-like 2D continuum model describing the shapes of such nanotubes. In this comment, we provide additional insight into this problem taking into account the exact analytic representation of the shapes that a SWCNT attains when subjected to hydrostatic pressure according to the very same continuum model.

  5. Comment on “Two-dimensional positive column structure in a discharge tube with radius discontinuity” [Phys. Plasmas 21, 113503 (2014)

    Energy Technology Data Exchange (ETDEWEB)

    Demidova, M. V. [Department of Chemistry, Wright State University, Dayton, Ohio 45435 (United States); Division of NLP Technology, INTEPH Technology LLC, Dayton, Ohio 45066 (United States); Kudryavtsev, A. A. [Division of NLP Technology, INTEPH Technology LLC, Dayton, Ohio 45066 (United States); International Laboratory “Nonlocal Plasma in Nanotechnology and Medicine”, ITMO University, Kronverkskiy pr. 49, St. Petersburg 197101 (Russian Federation); Kurlyandskaya, I. P. [International Laboratory “Nonlocal Plasma in Nanotechnology and Medicine”, ITMO University, Kronverkskiy pr. 49, St. Petersburg 197101 (Russian Federation); Department of Optics, St. Petersburg State University, St. Petersburg 199034 (Russian Federation); Saifutdinov, A. I.; Stepanova, O. M. [Department of Optics, St. Petersburg State University, St. Petersburg 199034 (Russian Federation)

    2015-09-15

    Zobnin et al. have published a paper [Phys. Plasmas, 21, 113503 (2014)] on a topic of discharge physics in the presence of a sharp change in cylindrical discharge geometry. In the comment it is pointed out that for untrapped electrons a full kinetic equation, which includes dependences on spatial coordinates and energies, has to be used for the electron velocity distribution function determination. It is also unclear what probe theories Zobnin et al. have used in their paper for the calculation of electron current to the discharge tube wall.

  6. Horns Rev offshore wind farm. Environmental impact assessment of sea bottom and marine biology

    Energy Technology Data Exchange (ETDEWEB)

    Leonhard, S.B.

    2000-03-15

    An Environmental Impact Assessment (EIA) of a planned 150 MW offshore wind farm at Horns Rev has been carried out for the marine biology and sea bottom in the area, and includes vegetation and benthic fauna. The study forms part of a total EIA of the planned offshore wind farm. This EIA study has been drawn up in accordance with the guidelines laid down by the Ministry of Environment and Energy in the publication, 'Guidelines for preparation of EIAstudies for offshore wind farms. Horns Rev is situated off Blaevands Huk, which is Denmark's most westerly point. It is a shallow reef with water depths between 2 and 9 metres and is primarily composed of sand, gravel and pebbles. The area designated for the wind farm lies directly south of Horns Rev and is dominated by sand with a median particle size of 0.3 mm. Along the edges, towards areas of greater depth, the particle size increases. There are areas of fine sand in the deepest area, and in isolated pockets within the proposed wind farm site. The sediment is characterised by a very low (<1%) organic matter content. On the basis of the expected impact from the establishment of the wind farm, it is not deemed necessary to carry out special programmes during the construction phase for monitoring of the environmental-biological conditions. A monitoring and control programme is recommended during the production phase in order to follow the copper concentration in bivalves, or alternatively to initiate recovery or elimination of the copper-laden waste. A control programme is recommended during the production phase in order to follow the establishment and succession of the fouling community on the wind turbine foundations and scour-protecting revetments. (BA)

  7. Horns Rev offshore wind farm. Environmental impact assessment of sea bottom and marine biology

    Energy Technology Data Exchange (ETDEWEB)

    Leonhard, S B

    2000-03-15

    An Environmental Impact Assessment (EIA) of a planned 150 MW offshore wind farm at Horns Rev has been carried out for the marine biology and sea bottom in the area, and includes vegetation and benthic fauna. The study forms part of a total EIA of the planned offshore wind farm. This EIA study has been drawn up in accordance with the guidelines laid down by the Ministry of Environment and Energy in the publication, 'Guidelines for preparation of EIAstudies for offshore wind farms. Horns Rev is situated off Blaevands Huk, which is Denmark's most westerly point. It is a shallow reef with water depths between 2 and 9 metres and is primarily composed of sand, gravel and pebbles. The area designated for the wind farm lies directly south of Horns Rev and is dominated by sand with a median particle size of 0.3 mm. Along the edges, towards areas of greater depth, the particle size increases. There are areas of fine sand in the deepest area, and in isolated pockets within the proposed wind farm site. The sediment is characterised by a very low (<1%) organic matter content. On the basis of the expected impact from the establishment of the wind farm, it is not deemed necessary to carry out special programmes during the construction phase for monitoring of the environmental-biological conditions. A monitoring and control programme is recommended during the production phase in order to follow the copper concentration in bivalves, or alternatively to initiate recovery or elimination of the copper-laden waste. A control programme is recommended during the production phase in order to follow the establishment and succession of the fouling community on the wind turbine foundations and scour-protecting revetments. (BA)

  8. Bird numbers and distributions in the Horns Rev offshore wind farm area. Annual status report 2004

    Energy Technology Data Exchange (ETDEWEB)

    Krag Petersen, I.

    2005-07-01

    This report presents data from four aerial surveys of birds in the Horns Rev wind farm area in 2004. Three surveys from the winter and spring of 2004 are thoroughly reported here. The fourth survey of 9 September 2004 is reported in general terms, but not included in presentations of distribution and effect analyses of the wind farm. Data from this survey will be thoroughly dealt with in a future report. Including the four surveys of 2004, a total of 29 surveys have been performed in that area since August 1999. (au)

  9. Pilot power based rate control in CDMA 2000 1x EV-DO Rev-A

    Institute of Scientific and Technical Information of China (English)

    LIU Xiao-feng; GU Jian; YANG Hong-wen

    2008-01-01

    This article proposes a new algorithm to improvethe rate control efficiency of enhanced reverse link mediumaccess control (RLMAC) in the code division multiple access(CDMA) lx EV-DO release A(Rev. A) system. The newalgorithm brings reverse access terminal (AT) pilot power tothe RLMAC rate control procedure and makes it easier for alow pilot power user to increase its data rate when the systemis slightly loaded and harder to decrease its date rate when thesystem is heavily loaded. Numerical results of system levelsimulations show that the new algorithm can bring highersystem throughput, lower AT transmission power, and lowersystem load.

  10. Simulaton of the Avedøreværket Unit 1 Cogeneration Plant with DNA

    DEFF Research Database (Denmark)

    Elmegaard, Brian; Houbak, Niels

    2003-01-01

    The simulator contest proposed for the ECOS 2003 conference has been solved using the DNA energy system simulator. The contest concerns the steam process of the Avedøreværket Unit 1 (AVV1) power plant. The plant is a 250 MWCHP plant with a maximum district heat production of 330 MJ/s. The plant has...... a net electric efficiency of 42% and a maximum energy utilization of 92%. In this paper it is demonstrated, that the DNA model of AVV1 can calculate the whole flow sheet balance at any load point, i.e., any possible combination of power production and district heat production. The paper also contains...

  11. A novel, mouse mammary tumor virus encoded protein with Rev-like properties

    International Nuclear Information System (INIS)

    Indik, Stanislav; Guenzburg, Walter H.; Salmons, Brian; Rouault, Francoise

    2005-01-01

    We have identified a novel, multiple spliced, subgenomic mRNA species in MMTV producing cells of different origin containing an open reading frame encoding a 39-kDa Rev-like protein, Rem (regulator of expression of MMTV). An EGFP-Rem fusion protein is shown to be predominantly in the nucleolus. Further leptomycin B inhibits the nuclear export of nonspliced MMTV transcripts, implicating Rem in nuclear export by the Crm1 pathway in MMTV. Rem is thus reminiscent of the Rec protein from the related endogenous human retrovirus, HERV-K

  12. Fundamental study on REV based on crack tensor at the Mizunami Underground Research Laboratory

    International Nuclear Information System (INIS)

    Tanno, Takeo; Sato, Toshinori; Sanada, Hiroyuki; Hikima, Ryoichi; Kumasaka, Hiroo; Tada, Hiroyuki

    2013-01-01

    The crack tensor model which is a kind of equivalent continuum model has been studied in rock mechanical investigation in the MIU. The fractured rock mass is modeled as the elastic continuum model with this crack tensor. In this study, this crack tensor based on the geological observation in the MIU project was calculated, and Representative Elementary Volume (REV) in the ventilation shaft and -300 m access/research gallery was studied based on the relative error of this crack tensor. As a result, the convergence of the relative error was faster in the -300 m access/research gallery than in the ventilation shaft. (author)

  13. Single and Double Infrared Transitions in Rapid Vapor Deposited Parahydrogen Solids: Application to Sample Thickness Determination and Quantitative Infrared Absorption Spectroscopy

    National Research Council Canada - National Science Library

    Tam, Simon

    2001-01-01

    ...) solid from its infrared (IR) absorption spectrum. Millimeters-thick pH2 solids of exceptional optical clarity can be produced by the rapid vapor deposition method M.E. Fajardo and S. Tam, J. Chem. Phys. 108, 4237 (1998...

  14. High amplitude phase resetting in rev-erbalpha/per1 double mutant mice.

    Directory of Open Access Journals (Sweden)

    Corinne Jud

    Full Text Available Over time, organisms developed various strategies to adapt to their environment. Circadian clocks are thought to have evolved to adjust to the predictable rhythms of the light-dark cycle caused by the rotation of the Earth around its own axis. The rhythms these clocks generate persist even in the absence of environmental cues with a period of about 24 hours. To tick in time, they continuously synchronize themselves to the prevailing photoperiod by appropriate phase shifts. In this study, we disrupted two molecular components of the mammalian circadian oscillator, Rev-Erbalpha and Period1 (Per1. We found that mice lacking these genes displayed robust circadian rhythms with significantly shorter periods under constant darkness conditions. Strikingly, they showed high amplitude resetting in response to a brief light pulse at the end of their subjective night phase, which is rare in mammals. Surprisingly, Cry1, a clock component not inducible by light in mammals, became slightly inducible in these mice. Taken together, Rev-Erbalpha and Per1 may be part of a mechanism preventing drastic phase shifts in mammals.

  15. Validation of CATHENA MOD-3.5/Rev0 for single-phase water hammer

    International Nuclear Information System (INIS)

    Beuthe, T.G.

    2000-01-01

    This paper describes work performed to validate the system thermalhydraulics code CATHENA MOD-3.5c/Rev0 for single-phase water hammer. Simulations were performed and are compared quantitatively against numerical tests and experimental results from the Seven Sisters Water Hammer Facility to demonstrate CATHENA can predict the creation and propagation of pressure waves when valves are opened and closed. Simulations were also performed to show CATHENA can model the behaviour of reflected and transmitted pressure waves at area changes, dead ends, tanks, boundary conditions, and orifices in simple and more complex piping systems. The CATHENA results are shown to calculate pressure and wave propagation speeds to within 0.2% and 0.5% respectively for numerical tests and within 3.3% and 5% for experimental results respectively. These results are used to help validate CATHENA for use in single-phase water hammer analysis. They also provide assurance that the fundamental parameters needed to successfully model more complex forms of water hammer are accounted for in the MOD-3.5c/Rev0 version of CATHENA, and represent the first step in the process to validate the code for use in modelling two-phase water hammer and condensation-induced water hammer. (author)

  16. Technical reports retrieval system(rev. 1) in the field of nuclear energy

    International Nuclear Information System (INIS)

    Choi, S.D.; Lee, Y.K.; Yim, S.H.

    1983-01-01

    TRRS(rev. 1), on-line Technical Reports Retrieval System, a set of computer programs, was designed and developed to provide fast and efficient access to computer-based information files. This system was foucused upon its application to the retrival of technical reports collected in KAERI, and developed not only to meet the requirements of researchers sitting at terminal but to accomodate its sufficiently general logic to other computer systems. The retrival program language is FORTRAN IV Plus. The users can search the whole files using next eleven TRRS(rev. 1) commands, HELP, SEARCH, LOOK, COMBINE, EXPAND, SELECT, REVIEW, RESTART, TYPE, PRINT, and END. The special features of this system are as follows. First, the SEARCH command can process full and truncation (truncation mark is %), and can combine such truncated terms using Boolean operators, and (*), and and-not (.). Second, COMBINE command can combine set numbers with year(s), language(s) and a substring of titles. Third, after EXPAND command, either full or truncated term, SELECT command brings same result of SEARCH command. Finally, real time response is very short, real time response is very short, usually within a second or less. (Author)

  17. Benchmark test of JENDL-3T and -3T/Rev.1

    International Nuclear Information System (INIS)

    Takano, Hideki; Kaneko, Kunio.

    1989-10-01

    The fast reactor 70-group constant set JFS-3-J3T has been generated by using the JENDL-3T nuclear data. One-dimensional 21-benchmark cores and the ZPPR-9 core were analysed with the JFS-3-J3T set. The results obtained are summarized as follows: (1) The values of keff are underestimated by 0.6% for Pu-fueled cores and overestimated by 2% for U-fueled cores. (2) The central reaction rate ratio 239 σ f φ/ 235 σ f φ is in a good agreement with the experimental value, though 238 σ c φ/ 239 σ f φ and 238 σ f φ/ 235 σ f φ are overestimated. (3) Doppler and Na-void reactivities are in a good agreement with the measured data. (4) The prediction accuracy of radial reaction rate distributions are improved in the comparison of the results obtained with the JENDL-2 data. Furthermore, the benchmark test of JENDL-3T/Rev. 1 which was revised from JENDL-3T for several important nuclides has been again performed. It was shown that JENDL-3T/Rev. 1 would predict nuclear characteristics more satisfactorily than JENDL-3T. (author)

  18. The structural basis of gas-responsive transcription by the human nuclear hormone receptor REV-ERBbeta.

    Directory of Open Access Journals (Sweden)

    Keith I Pardee

    2009-02-01

    Full Text Available Heme is a ligand for the human nuclear receptors (NR REV-ERBalpha and REV-ERBbeta, which are transcriptional repressors that play important roles in circadian rhythm, lipid and glucose metabolism, and diseases such as diabetes, atherosclerosis, inflammation, and cancer. Here we show that transcription repression mediated by heme-bound REV-ERBs is reversed by the addition of nitric oxide (NO, and that the heme and NO effects are mediated by the C-terminal ligand-binding domain (LBD. A 1.9 A crystal structure of the REV-ERBbeta LBD, in complex with the oxidized Fe(III form of heme, shows that heme binds in a prototypical NR ligand-binding pocket, where the heme iron is coordinately bound by histidine 568 and cysteine 384. Under reducing conditions, spectroscopic studies of the heme-REV-ERBbeta complex reveal that the Fe(II form of the LBD transitions between penta-coordinated and hexa-coordinated structural states, neither of which possess the Cys384 bond observed in the oxidized state. In addition, the Fe(II LBD is also able to bind either NO or CO, revealing a total of at least six structural states of the protein. The binding of known co-repressors is shown to be highly dependent upon these various liganded states. REV-ERBs are thus highly dynamic receptors that are responsive not only to heme, but also to redox and gas. Taken together, these findings suggest new mechanisms for the systemic coordination of molecular clocks and metabolism. They also raise the possibility for gas-based therapies for the many disorders associated with REV-ERB biological functions.

  19. The Structural Basis of Gas-Responsive Transcription by the Human Nuclear Hormone Receptor REV-ERBβ

    Science.gov (United States)

    Pardee, Keith I; Xu, Xiaohui; Reinking, Jeff; Schuetz, Anja; Dong, Aiping; Liu, Suya; Zhang, Rongguang; Tiefenbach, Jens; Lajoie, Gilles; Plotnikov, Alexander N; Botchkarev, Alexey; Krause, Henry M; Edwards, Aled

    2009-01-01

    Heme is a ligand for the human nuclear receptors (NR) REV-ERBα and REV-ERBβ, which are transcriptional repressors that play important roles in circadian rhythm, lipid and glucose metabolism, and diseases such as diabetes, atherosclerosis, inflammation, and cancer. Here we show that transcription repression mediated by heme-bound REV-ERBs is reversed by the addition of nitric oxide (NO), and that the heme and NO effects are mediated by the C-terminal ligand-binding domain (LBD). A 1.9 Å crystal structure of the REV-ERBβ LBD, in complex with the oxidized Fe(III) form of heme, shows that heme binds in a prototypical NR ligand-binding pocket, where the heme iron is coordinately bound by histidine 568 and cysteine 384. Under reducing conditions, spectroscopic studies of the heme-REV-ERBβ complex reveal that the Fe(II) form of the LBD transitions between penta-coordinated and hexa-coordinated structural states, neither of which possess the Cys384 bond observed in the oxidized state. In addition, the Fe(II) LBD is also able to bind either NO or CO, revealing a total of at least six structural states of the protein. The binding of known co-repressors is shown to be highly dependent upon these various liganded states. REV-ERBs are thus highly dynamic receptors that are responsive not only to heme, but also to redox and gas. Taken together, these findings suggest new mechanisms for the systemic coordination of molecular clocks and metabolism. They also raise the possibility for gas-based therapies for the many disorders associated with REV-ERB biological functions. PMID:19243223

  20. Lab. of Appl. Math. Phys

    DEFF Research Database (Denmark)

    Albertsen, Niels Christian

    1989-01-01

    A new system of poles for the Green's function for a dielectric-coated cylinder has been found. In general, these poles correspond to creeping waves, which are strongly attenuated except for very thick coatings. For radii below a critical value, one of the new poles replaces one of those previous...

  1. Comment on “Motion of a helical vortex filament in superfluid 4He under the extrinsic form of the local induction approximation” [Phys. Fluids 25, 085101 (2013)

    International Nuclear Information System (INIS)

    Hietala, Niklas; Hänninen, Risto

    2014-01-01

    We comment on the paper by Van Gorder [“Motion of a helical vortex filament in superfluid 4 He under the extrinsic form of the local induction approximation,” Phys. Fluids 25, 085101 (2013)]. We point out that the flow of the normal fluid component parallel to the vortex will often lead into the Donnelly–Glaberson instability, which will cause the amplification of the Kelvin wave. We explain why the comparison to local nonlinear equation is unreasonable, and remark that neglecting the motion in the x-direction is not reasonable for a Kelvin wave with an arbitrary wavelength and amplitude. The correct equations in the general case are also derived

  2. Addendum to: ''The SNO solar neutrino data, neutrinoless double beta-decay and neutrino mass spectrum'' [Phys. Lett. B 544 (2002) 239

    International Nuclear Information System (INIS)

    Pascoli, S.; Petcov, S.T.

    2004-01-01

    We update our earlier study [Phys. Lett. B 544 (2002) 239], which was inspired by the 2002 SNO data, on the implications of the results of the solar neutrino experiments for the predictions of the effective Majorana mass in neutrinoless double beta-decay, vertical bar vertical bar. We obtain predictions for vertical bar vertical bar using the values of the neutrino oscillation parameters, obtained in the analyzes of the presently available solar neutrino data, including the just published data from the salt phase of the SNO experiment, the atmospheric neutrino and CHOOZ data and the first data from the KamLAND experiment. The main conclusion reached in the previous study [Phys. Lett. B 544 (2002) 239] of the existence of significant lower bounds on vertical bar vertical bar in the cases of neutrino mass spectrum of inverted hierarchical (IH) and quasi-degenerate (QD) type is strongly reinforced by fact that combined solar neutrino data (i) exclude the possibility of cos2θ o =0 at more than 5 s.d., (ii) determine as a best fit value cos2θ o =0.40, and (iii) imply at 95% C.L. that cos2θ o ∼>0.22, θ o being the solar neutrino mixing angle. For the IH and QD spectra we get using, e.g., the 90% C.L. allowed ranges of values of the oscillation parameters, vertical bar vertical bar ∼>0.010 eV and vertical bar vertical bar ∼>0.043 eV, respectively. We also comment on the possibility to get information on the neutrino mass spectrum and on the CP-violation in the lepton sector due to Majorana CP-violating phases

  3. Administrative Circular No. 2 (Rev. 7) - Recruitment, appointment and possible developments regarding the contractual position of staff members

    CERN Multimedia

    2015-01-01

    Administrative Circular No. 2 (Rev. 7), entitled "Recruitment, appointment and possible developments regarding the contractual position of staff members", approved by the Director-General following discussion at the Standing Concertation Committee meeting held on 17 February 2015 is available via the following link: AC No. 2 (Rev.7).   This revised circular cancels and replaces Administrative Circular No. 2 (Rev. 6), entitled "Recruitment, appointment and possible developments regarding the contractual position of staff members" and dated January 2015. The circular was revised in order to implement the amendment to Article R II 1.17 of the Staff Regulations, which introduces the possibility of extending limited-duration (LD) contracts up to a maximum total duration of eight years from the previous duration of five years. The award of indefinite contracts will continue to be subject to the outcome of a competitive process. Department Head Of...

  4. Administrative Circular No. 30 (Rev. 3) - “Financial benefits on taking up appointment and on termination of contract”

    CERN Multimedia

    2013-01-01

    Administrative Circular No. 30 (Rev. 3) entitled “Financial benefits on taking up appointment and on termination of contract”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 27 June 2013 and entering into force on 1 August 2013, is available on the intranet site of the Human Resources Department (see here).   Administrative Circular No. 30 (Rev. 3) is applicable to all members of the personnel. It cancels and replaces Administrative Circular No. 30 (Rev. 2/Corr.) entitled "Financial benefits on taking up appointment and on termination of contract” of September 2009. This circular was revised in order to implement the modifications introduced into the Staff Rules and Regulations in January 2013 relating to the introduction of the status of Associate Member States and new categories of associated members of the personnel. In particular, the notion of “Member State” in Annexe II (&a...

  5. Administrative Circulars Nos. 12 A and B (Rev. 1) – Education Fees

    CERN Multimedia

    HR Department

    2007-01-01

    Administrative Circulars Nos. 12 A and B (Rev. 1) – "Education Fees" are now available on the intranet site of the Human Resources Department: http://cern.ch/hr-docs/admincirc/admincirc.asp These Circulars cancel and replace Administrative Circular No.12 – "Education Grant" of April 1981. Copies will shortly be available in Departmental secretariats. Administrative Circular No. 12 A is applicable to staff members (except former "local staff"), fellows and paid associates, recruited before 1st January 2007. It may be noted that, at the initiative of the Human Resources Department, a number of important simplifications have been introduced. These cover in particular lump sum payments to compensate for accommodation, meals and journey expenses. Administrative Circular No. 12 B is applicable to staff members, fellows, scientific associates recruited as of 1st January 2007, as well as to former "local staff" recruited prior to this date. If you require any additional informa...

  6. Administrative Circulars Nos. 12 A and B (Rev. 1) – Education Fees

    CERN Multimedia

    HR Department

    2007-01-01

    Administrative Circulars Nos. 12 A and B (Rev. 1) – "Education Fees" are now available on the intranet site of the Human Resources Department: http://https://hr-docs.web.cern.ch/hr-docs/admincirc/admincirc_fr.asp These circulars cancel and replace Administrative Circular No.12 – "Education Grant" of April 1981. Copies will shortly be available in Departmental secretariats. Administrative Circular No. 12 A is applicable to staff members (except former "local staff"), fellows and paid associates, recruited before 1st January 2007. It may be noted that, at the initiative of the Human Resources Department, a number of important simplifications have been introduced. These cover, in particular, lump sum payments to compensate for accommodation, meals and journey expenses. Administrative Circular No. 12 B is applicable to staff members, fellows, scientific associates recruited as of 1st January 2007, as well as to former "local staff" recruited prior to this date. If you requi...

  7. Safeguards Summary Event List (SSEL), January 1, 1990--December 31, 1996, Vol. 2, Rev. 5

    International Nuclear Information System (INIS)

    1997-07-01

    The Safeguards Summary Event List (SSEL), Vol. 2, Rev. 5, provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC) which occurred and were reported from January 1, 1990, through December 31, 1996. Because of public interest, the Miscellaneous category includes a few events which involve either source material, byproduct material, or natural uranium which are exempt from safeguards requirements. Events are described under the categories of Bomb-related, Intrusion, Missing and/or Allegedly Stolen, Transportation-related, Tampering/Vandalism, Arson, Firearms, Radiological Sabotage, Nonradiological Sabotage, and Miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

  8. Numerical Modelling of Large-Diameter Steel Piles at Horns Rev

    DEFF Research Database (Denmark)

    Augustesen, Anders Hust; Brødbæk, K. T.; Møller, M.

    2009-01-01

    Today large-diameter monopiles are the most common foundation type used for large offshore wind farms. This paper aims to investigate the behaviour of monopiles under monotonic loading taking the interaction between the pile and the subsoil into account. Focus is paid to a monopile used as founda......Today large-diameter monopiles are the most common foundation type used for large offshore wind farms. This paper aims to investigate the behaviour of monopiles under monotonic loading taking the interaction between the pile and the subsoil into account. Focus is paid to a monopile used...... as foundation for a wind turbine at Horns Rev located in the Danish sector of the North Sea. The outer diameter of the pile is 4 m and the subsoil at the location consists primarily of sand. The behaviour of the pile is investigated under realistic loading conditions by means of a traditional Winkler...

  9. Safeguards Summary Event List (SSEL), January 1, 1990--December 31, 1996, Vol. 2, Rev. 5

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    The Safeguards Summary Event List (SSEL), Vol. 2, Rev. 5, provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC) which occurred and were reported from January 1, 1990, through December 31, 1996. Because of public interest, the Miscellaneous category includes a few events which involve either source material, byproduct material, or natural uranium which are exempt from safeguards requirements. Events are described under the categories of Bomb-related, Intrusion, Missing and/or Allegedly Stolen, Transportation-related, Tampering/Vandalism, Arson, Firearms, Radiological Sabotage, Nonradiological Sabotage, and Miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels.

  10. Numerical modelling of powder caking at REV scale by using DEM

    Science.gov (United States)

    Guessasma, Mohamed; Silva Tavares, Homayra; Afrassiabian, Zahra; Saleh, Khashayar

    2017-06-01

    This work deals with numerical simulation of powder caking process caused by capillary condensation phenomenon. Caking consists in unwanted agglomeration of powder particles. This process is often irreversible and not easy to predict. To reproduce mechanism involved by caking phenomenon we have used the Discrete Elements Method (DEM). In the present work, we mainly focus on the role of capillary condensation and subsequent liquid bridge formation within a granular medium exposed to fluctuations of ambient relative humidity. Such bridges cause an attractive force between particles, leading to the formation of a cake with intrinsic physicochemical and mechanical properties. By considering a Representative Elementary Volume (REV), the DEM is then performed by means of a MULTICOR-3D software tacking into account the properties of the cake (degree of saturation) in order to establish relationships between the microscopic parameters and the macroscopic behaviour (tensile strength).

  11. Numerical modelling of powder caking at REV scale by using DEM

    Directory of Open Access Journals (Sweden)

    Guessasma Mohamed

    2017-01-01

    Full Text Available This work deals with numerical simulation of powder caking process caused by capillary condensation phenomenon. Caking consists in unwanted agglomeration of powder particles. This process is often irreversible and not easy to predict. To reproduce mechanism involved by caking phenomenon we have used the Discrete Elements Method (DEM. In the present work, we mainly focus on the role of capillary condensation and subsequent liquid bridge formation within a granular medium exposed to fluctuations of ambient relative humidity. Such bridges cause an attractive force between particles, leading to the formation of a cake with intrinsic physicochemical and mechanical properties. By considering a Representative Elementary Volume (REV, the DEM is then performed by means of a MULTICOR-3D software tacking into account the properties of the cake (degree of saturation in order to establish relationships between the microscopic parameters and the macroscopic behaviour (tensile strength.

  12. OPERATIONAL CIRCULAR No. 4 (REV. 1) – USE OF VEHICLES BELONGING TO OR RENTED BY CERN

    CERN Document Server

    2012-01-01

    Operational Circular No. 4 (Rev. 1) entitled “Use of vehicles belonging to or rented by CERN”, approved by the Director-general following discussion in the Standing Concertation Committee meeting of 15 February 2012, is available on the intranet site of the Human Resources Department: https://hr-docs.web.cern.ch/hr-docs/opcirc/opcirc.asp It cancels and replaces Operational Circular No. 4 entitled “Conditions for use by members of the CERN personnel of vehicles belonging to or rented by CERN” of April 2003. This new version enables, in particular, to include CERN contractors and their personnel, to harmonize the structure of the circular with other circulars and to simplify the procedures by permitting electronics forms. Department Head Office HR Department

  13. Introduction Of Wavestar Wave Energy Converters At The Danish Offshore Wind Power Plant Horns Rev 2

    DEFF Research Database (Denmark)

    Marquis, L.; Kramer, Morten; Kringelum, J.

    is to be connected to a wind turbine at the DONG Energy owned wind power plant Horns Rev 2 placed off the western coast of Denmark. The plant delivers its energy production to a transformer station owned by Energinet.dk. Energinet.dk has the obligation to ensure that power is transmitted to the Danish consumers...... with this combination. This can increase the value of the produced power from future wind/wave plants. Further potential synergies of combining wind and wave energy in the same area include increased energy production from the available area and sharing of infrastructure costs as well as O&M facilities. In a future....... If Executed the project will be the first one in the world where wind and wave power are combined at full scale. The goal of the project is to evaluate the opportunities of combining wind and wave energy production on a commercial scale and to demonstrate the reduction of energy fluctuations...

  14. Hard bottom substate monitoring Horns Rev offshore wind farm 2004. Survey report no. 1

    Energy Technology Data Exchange (ETDEWEB)

    Frederiksen, Rune

    2004-05-15

    In connection with the implementation of the monitoring programme concerning the ecological implication of the effect of the introduction of hard substrate related to the Horns Rev Wind Farm, the third survey was carried out in the period 2431 March 2004. The survey covered collection of fauna and flora samples from the scour protection and at the wind turbine towers at six turbine sites. Video recordings were planned at different sites to provide documentation, but due to poor visibility the video recordings were postponed. On request from Elsam Engineering A/S video inspections on technical installations were made at turbine '84 and 95. This report covers a short description of the methodology, sampling activities and site description. (au)

  15. Solid residues

    International Nuclear Information System (INIS)

    Mulder, E.; Duin, P.J. van; Grootenboer, G.J.

    1995-01-01

    A summary is presented of the many investigations that have been done on solid residues of atmospheric fluid bed combustion (AFBC). These residues are bed ash, cyclone ash and bag filter ash. Physical and chemical properties are discussed and then the various uses of residues (in fillers, bricks, gravel, and for recovery of aluminium) are summarised. Toxicological properties of fly ash and stack ash are discussed as are risks of pneumoconiosis for workers handling fly ash, and contamination of water by ashes. On the basis of present information it is concluded that risks to public health from exposure to emissions of coal fly ash from AFBC appear small or negligible as are health risk to workers in the coal fly ash processing industry. 35 refs., 5 figs., 12 tabs

  16. Functional analysis of the interaction of the human immunodeficiency virus type 1 Rev nuclear export signal with its cofactors

    International Nuclear Information System (INIS)

    Kiss, A.; Li, L.; Gettemeier, T.; Venkatesh, L.K.

    2003-01-01

    Human immunodeficiency virus type 1 (HIV-1) Rev-mediated nuclear export of viral RNAs involves the interaction of its leucine-rich nuclear export sequence (NES) with nuclear cofactors. In yeast two-hybrid screens of a human lymph node derived cDNA expression library, we identified the human nucleoporin Nup98 as a highly specific and potent interactor of the Rev NES. Using an extensive panel of nuclear export positive and negative mutants of the functionally homologous NESs of the HIV-1 Rev, human T cell leukemia virus type 1 (HTLV-1) Rex, and equine infectious anemia virus (EIAV) Rev proteins, physiologically significant interaction of hNup98 with the various NESs was demonstrated. Missense mutations in the yeast nuclear export factor Crm1p that abrogated Rev NES interaction with the XXFG repeat-containing nucleoporin, Rab/hRIP, had minimal effects on the interaction of GLFG repeat-containing hNup98. Functional analysis of Nup98 domains required for nuclear localization demonstrated that the entire ORF was required for efficient incorporation into the nuclear envelope. A putative nuclear localization signal was identified downstream of the GLFG repeat region. Whereas overexpression of both full-length Nup98 and the amino-terminal GLFG repeat region, but not the unique carboxy-terminal region, induced significant suppression of HIV unspliced RNA export, lower levels of exogenous Nup98 expression resulted in a relatively modest increase in unspliced RNA export. These results suggest a physiological role for hNup98 in modulating Rev-dependent RNA export during HIV infection

  17. A stably expressed llama single-domain intrabody targeting Rev displays broad-spectrum anti-HIV activity.

    Science.gov (United States)

    Boons, Eline; Li, Guangdi; Vanstreels, Els; Vercruysse, Thomas; Pannecouque, Christophe; Vandamme, Anne-Mieke; Daelemans, Dirk

    2014-12-01

    The HIV Rev protein mediates the transport of partially and unspliced HIV mRNA from the nucleus to the cytoplasm. Rev multimerizes on a secondary stem-loop structure present in the viral intron-containing mRNA species and recruits the cellular karyopherin CRM1 to export viral mRNAs from the nucleus to the cytoplasm. Previously we have identified a single-domain intrabody (Nb(190)), derived from a llama heavy-chain antibody, which efficiently inhibits Rev multimerization and suppresses the production of infectious virus. We recently mapped the epitope of this nanobody and demonstrated that Rev residues K20 and Y23 are crucial for interaction while residues V16, H53 and L60 are important to a lesser extent. Here, we generated cell lines stably expressing Nb(190) and assessed the capacity of these cell lines to suppress the replication of different HIV-1 subtypes. These cells stably expressing the single-domain antibody are protected from virus-induced cytopathogenic effect even in the context of high multiplicity of infection. In addition, the replication of different subtypes of group M and one strain of group O is significantly suppressed in these cell lines. Next, we analysed the natural variations of Rev amino acids in sequence samples from HIV-1 infected patients worldwide and assessed the effect of Nb(190) on the most prevalent polymorphisms occurring at the key epitope positions (K20 and Y23) in Rev. We found that Nb(190) was able to suppress the function of these Rev variants except for the K20N mutant, which was present in only 0.7% of HIV-1 sequence populations (n = 4632). Cells stably expressing the single-domain intrabody Nb(190) are protected against virus-induced cytopathogenic effect and display a selective survival advantage upon infection. In addition, Nb(190) suppresses the replication of a wide range of different HIV-1 subtypes. Large-scale sequence analysis reveals that the Nb(190) epitope positions in Rev are well conserved across major HIV-1

  18. Administrative circular No. 2 (Rev. 5) – Recruitment, appointment and possible developments regarding the contractual position of staff members

    CERN Document Server

    HR Department

    2011-01-01

    Administrative Circular No. 2 (Rev. 5) entitled "Recruitment, appointment and possible developments regarding the contractual position of staff members", approved by the Director-General following discussion in the Standing Concertation Committee meeting on 1 September 2011, is available on the intranet site of the Human Resources Department: https://cern.ch/hr-docs/admincirc/admincirc.asp It cancels and replaces Administrative Circular No. 2 (Rev. 4) entitled "Recruitment, appointment and possible developments regarding the contractual position of staff members" of September 2009. Department Head Office

  19. Persistence of attenuated HIV-1 rev alleles in an epidemiologically linked cohort of long-term survivors infected with nef-deleted virus

    Directory of Open Access Journals (Sweden)

    Wesselingh Steven L

    2007-07-01

    Full Text Available Abstract Background The Sydney blood bank cohort (SBBC of long-term survivors consists of multiple individuals infected with nef-deleted, attenuated strains of human immunodeficiency virus type 1 (HIV-1. Although the cohort members have experienced differing clinical courses and now comprise slow progressors (SP as well as long-term nonprogressors (LTNP, longitudinal analysis of nef/long-terminal repeat (LTR sequences demonstrated convergent nef/LTR sequence evolution in SBBC SP and LTNP. Thus, the in vivo pathogenicity of attenuated HIV-1 strains harboured by SBBC members is dictated by factors other than nef/LTR. Therefore, to determine whether defects in other viral genes contribute to attenuation of these HIV-1 strains, we characterized dominant HIV-1 rev alleles that persisted in 4 SBBC subjects; C18, C64, C98 and D36. Results The ability of Rev derived from D36 and C64 to bind the Rev responsive element (RRE in RNA binding assays was reduced by approximately 90% compared to Rev derived from HIV-1NL4-3, C18 or C98. D36 Rev also had a 50–60% reduction in ability to express Rev-dependent reporter constructs in mammalian cells. In contrast, C64 Rev had only marginally decreased Rev function despite attenuated RRE binding. In D36 and C64, attenuated RRE binding was associated with rare amino acid changes at 3 highly conserved residues; Gln to Pro at position 74 immediately N-terminal to the Rev activation domain, and Val to Leu and Ser to Pro at positions 104 and 106 at the Rev C-terminus, respectively. In D36, reduced Rev function was mapped to an unusual 13 amino acid extension at the Rev C-terminus. Conclusion These findings provide new genetic and mechanistic insights important for Rev function, and suggest that Rev function, not Rev/RRE binding may be rate limiting for HIV-1 replication. In addition, attenuated rev alleles may contribute to viral attenuation and long-term survival of HIV-1 infection in a subset of SBBC members.

  20. Analysis of translesion DNA synthesis activity of the human REV1 protein, which is a key player in radiation-induced mutagenesis

    International Nuclear Information System (INIS)

    Masuda, Yuji; Kamiya, Kenji

    2003-01-01

    Ionizing radiation frequently causes oxidative DNA damage in cells. It has been suggested that functions of the REV1 gene are induction of mutations and prevention of cell death caused by ionizing radiation through the damage bypass DNA replication. The gene product possesses a deoxycytidyl transferase activity, which is required for translesion DNA synthesis of a variety of damaged bases and an abasic site. To elucidate molecular mechanisms of the mutagenesis and translesion DNA synthesis, it is important to characterize the enzymatic properties of the REV1 protein. Here, we describe a novel method for purifying the recombinant human REV1 protein and the anzymatic properties of the protein. We established an efficient system for induction of the recombinant human REV1 protein in Escherichia coli cells. The REV1 protein was purified to homogeneity using nickel-chelating sepharose, heparin sepharose and superdex 200 chromatography. When purified by this method, REV1 protein is free of endo-, exonuclease and DNA polymerase activities. The purified REV1 protein is suitable for enzymological studies, and we used this to biochemical characterization. The REV1 protein inserts dCMP opposite templates G, A, T, C and an abasic site and inserts dGMP and dTMP opposite template G. Kinetic analysis provided evidence for high efficiency for dCMP insertion opposite template G and an abasic site, suggesting that the REV1 protein play a role in translesion DNA synthesis of an abasic site. (author)

  1. OPERATIONAL CIRCULAR NO2 (REV. 1) - APRIL 1998 'CONDITIONS OF ACCESS TO THE FENCED PARTS OF THE CERN SITE'

    CERN Multimedia

    Human Resources Division

    2001-01-01

    Subsidiary document 'Implementation Measures' (Rev. 2) - April 2001 The subsidiary document has been amended. Copies are available from Divisional Secretariats and at CERN card issue points. Note : Administrative and operational circulars, as well as the lists of those in force, are available for consultation on WWW : ADMINISTRATIVE CIRCULARS OPERATIONAL CIRCULARS

  2. 78 FR 27971 - Determination That REV-EYES (Dapiprazole Hydrochloride Ophthalmic Solution), 0.5%, Was Not...

    Science.gov (United States)

    2013-05-13

    ...] Determination That REV-EYES (Dapiprazole Hydrochloride Ophthalmic Solution), 0.5%, Was Not Withdrawn From Sale... ophthalmic solution), 0.5%, was not withdrawn from sale for reasons of safety or effectiveness. This... ophthalmic solution, 0.5%, if all other legal and regulatory requirements are met. FOR FURTHER INFORMATION...

  3. Finanšu pārskata revīzijas process lielai sabiedrībai

    OpenAIRE

    Špoģe, Sarmīte

    2018-01-01

    Finanšu pārskata revīzijas process ir svarīgs temats, jo pirmreizēji revidētiem uzņēmumiem tiek atklātas būtiskas neatbilstības grāmatvedības uzskaitē, tās atbilstībai LR likumiem un normatīvajiem aktiem, kā arī finanšu pārskata sagatavošanā. Darba mērķis: apkopot un analizēt finanšu pārskata revīzijas procesu lielā sabiedrībā, noteikt revīzijas riskus, izstrādāt priekšlikumus revīzijas procesa uzlabošanai. Izvirzīto mērķu sasniegšanai autore pētīja un apkopoja informāciju par finanšu pārska...

  4. Upper Bound Radiation Dose Assessment for Military Personnel at McMurdo Station, Antarctica, between 1962 and 1979 (2REV)

    Science.gov (United States)

    2017-09-30

    N IC A L R EP O R T Defense Threat Reduction Agency 8725 John J. Kingman Road , MS-6201 Fort Belvoir, VA 22060-6201 STANDARD FORM 298 (Rev. 8/98...8725 John J. Kingman Road , Mail Stop 6201 Fort...Early Operation ..................................................................................... 5 2.2 Operations and Maintenance

  5. Rev1 contributes to proper mitochondrial function via the PARP-NAD(+)-SIRT1-PGC1 alpha axis

    DEFF Research Database (Denmark)

    Fakouri, Nima Borhan; Durhuus, Jon Ambaek; Regnell, Christine Elisabeth

    2017-01-01

    (ADP) ribose polymerase 1 (PARP1) activity, low endogenous NAD+, low expression of SIRT1 and PGC1α and low adenosine monophosphate (AMP)-activated kinase (AMPK) activity. We conclude that replication stress via Rev1-deficiency contributes to metabolic stress caused by compromized mitochondrial function via...... the PARP-NAD+-SIRT1-PGC1α axis....

  6. Reliability of Concentric, Eccentric and Isometric Knee Extension and Flexion when using the REV9000 Isokinetic Dynamometer

    DEFF Research Database (Denmark)

    de Carvalho Froufe Andrade, Alberto César Pereira; Caserotti, Paolo; de Carvalho, Carlos Manuel Pereira

    2013-01-01

    The aim of this study was to assess the reliability of isokinetic and ISO knee extensor and flexor muscle strength when using the REV9000 (Technogym) isokinetic dynamometer. Moreover, the reliability of several strength imbalance indices and bilateral ratios were also examined. Twenty-four physic...

  7. A Comprehensive Experiment for Molecular Biology: Determination of Single Nucleotide Polymorphism in Human REV3 Gene Using PCR-RFLP

    Science.gov (United States)

    Zhang, Xu; Shao, Meng; Gao, Lu; Zhao, Yuanyuan; Sun, Zixuan; Zhou, Liping; Yan, Yongmin; Shao, Qixiang; Xu, Wenrong; Qian, Hui

    2017-01-01

    Laboratory exercise is helpful for medical students to understand the basic principles of molecular biology and to learn about the practical applications of molecular biology. We have designed a lab course on molecular biology about the determination of single nucleotide polymorphism (SNP) in human REV3 gene, the product of which is a subunit of…

  8. The calculational VVER burnup Credit Benchmark No.3 results with the ENDF/B-VI rev.5 (1999)

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Gual, Maritza [Centro de Tecnologia Nuclear, La Habana (Cuba). E-mail: mrgual@ctn.isctn.edu.cu

    2000-07-01

    The purpose of this papers to present the results of CB3 phase of the VVER calculational benchmark with the recent evaluated nuclear data library ENDF/B-VI Rev.5 (1999). This results are compared with the obtained from the other participants in the calculations (Czech Republic, Finland, Hungary, Slovaquia, Spain and the United Kingdom). The phase (CB3) of the VVER calculation benchmark is similar to the Phase II-A of the OECD/NEA/INSC BUC Working Group benchmark for PWR. The cases without burnup profile (BP) were performed with the WIMS/D-4 code. The rest of the cases have been carried with DOTIII discrete ordinates code. The neutron library used was the ENDF/B-VI rev. 5 (1999). The WIMS/D-4 (69 groups) is used to collapse cross sections from the ENDF/B-VI Rev. 5 (1999) to 36 groups working library for 2-D calculations. This work also comprises the results of CB1 (obtained with ENDF/B-VI rev. 5 (1999), too) and CB3 for cases with Burnup of 30 MWd/TU and cooling time of 1 and 5 years and for case with Burnup of 40 MWd/TU and cooling time of 1 year. (author)

  9. Epitopes of human immunodeficiency virus regulatory proteins tat, nef, and rev are expressed in normal human tissue

    NARCIS (Netherlands)

    Parmentier, H. K.; van Wichen, D. F.; Meyling, F. H.; Goudsmit, J.; Schuurman, H. J.

    1992-01-01

    The expression of regulatory proteins tat, rev, and nef of human immunodeficiency virus type-1 (HIV-1) and tat of HIV-2 was studied in frozen sections of lymph nodes from HIV-1-infected individuals, and various tissues from uninfected persons. In HIV-1-positive lymph nodes, monoclonal antibodies to

  10. Control of HIV replication in astrocytes by a family of highly conserved host proteins with a common Rev-interacting domain (Risp).

    Science.gov (United States)

    Vincendeau, Michelle; Kramer, Susanne; Hadian, Kamyar; Rothenaigner, Ina; Bell, Jeanne; Hauck, Stefanie M; Bickel, Christian; Nagel, Daniel; Kremmer, Elisabeth; Werner, Thomas; Leib-Mösch, Christine; Brack-Werner, Ruth

    2010-10-23

    In human astrocytes, restriction of HIV replication involves inhibition of HIV Rev activity. We previously identified a Rev-interacting human protein fragment (16.4.1) that can reduce Rev activity. The 16.4.1 sequence is contained in a group of highly similar host cell proteins, which we call the Risp family. Here we investigate whether the Risp family is connected to HIV replication in astrocytes. Cell/tissue lysates were analyzed for Risp expression by western blot with various anti-Risp antibodies. The interaction of astrocytic Risp members with Rev was investigated by affinity chromatography. Astrocytes were transfected with expression plasmids containing cDNAs encoding full-length Risp or the isolated 16.4.1 region for Risp overexpression or with siRNAs designed for Risp knock-down. Rev activity was investigated with a Rev-reporter assay. RNA levels were quantified by real-time RT-PCR, HIV Gag levels by p24ELISA. Expression of the Risp family was demonstrated in human brain tissues and astrocytes. Astrocytes were shown to produce Risp family members that interact with Rev. Production of HIV Gag proteins and Rev-dependent RNAs in persistently infected astrocytes increased upon Risp knock-down and decreased upon Risp overexpression. Risp knock-down increased Rev activity and raised proportions of Rev proteins in the nucleus of astrocytes. Our results link the Risp family to restriction of HIV production and inhibition of Rev activity in astrocytes. We conclude that the Risp family represents a novel family of host factors that can control HIV replication and may be important for the containment of HIV infection in brain reservoirs.

  11. Study on the REV Size of Fractured Rock in the Non-Darcy Flow Based on the Dual-Porosity Model

    Directory of Open Access Journals (Sweden)

    Yuan Wang

    2018-01-01

    Full Text Available For the problem of whether the representative elementary volume (REV obtained in the Darcy flow is also applicable to the case of the non-Darcy flow, the study on the REV size within the non-Darcy flow is proposed tentatively. The concept of the REV in the non-Darcy flow is based on the definition of the REV. According to the determination of the REV in the Darcy flow, the intrinsic permeability k and non-Darcy coefficient β are used simultaneously for the determination of the REV in the non-Darcy flow. The pore pressure cohesive element (PPCE is developed with the subroutine in ABAQUS. Then the simulation method of the Darcy and non-Darcy flow in the fractured rock mass is built using the PPCE. The proposed plan is examined through the comparison with existing research results. It is validated that this technic is efficient and accurate in simulating the Darcy and non-Darcy flow in the fractured rock mass. Combined with fracture networks generated by Monte Carlo Simulation technique, the PPCE is applied to the study on the REV size. Both conditions of the Darcy and non-Darcy flow are simulated for comparison. The simulation results of this model show that the REV of the non-Darcy flow is inconsistent with the REV of the Darcy flow, and the REV of the non-Darcy flow is more significant than the REV of the Darcy flow. The intrinsic permeability k tensors obtained in the Darcy flow and the non-Darcy flow are basically the same.

  12. The effects of cynodon dactylon on the immune response of NMRI-MICE after challenge with REV1

    Directory of Open Access Journals (Sweden)

    Behrooz Ilkhanizadeh

    2016-10-01

    Full Text Available Cynodon dactylon is used in Iranian traditional medicine as a healing agent for reducing the complications of diabetes mellitus. We proposed that Cynodon dactylon may perform its effects through moderating humoral and cellular immune responses. We aimed to determine the possible effects of hydroalcholic extract of Cynodon dactylonon humoral and cellular immune responses following the Rev1 challenge in the mouse model. 20 NMRI male mice were randomly grouped in two equal groups and immunized with Rev1[0.1 ml Rev1+0.9 PBS[. Mice in the treatment group orally received 400 mg/kg hydroalcoholic extract of Cynodon dactylon every day from the beginning of the study for 2 weeks. Blood samples were obtained from the animals 5 days after the last injection. Moreover, 48 hr before bleeding time, Rev1[0.1 ml Rev1+0.9 PBS[was injected into the left hind foot pad of mice. The levels of anti-Rev1 antibody and the specific cellular immune responses were measured by microhemagglutination test and footpad thickness, respectively. Moreover, susceptibility of macrophages respiratory burst and proliferation of immune cells were measured in order withNitroblue tetrazolium[NBT] and Microculture Tetrazolium Assay [MTT]. The concentrations of IL-1, TNFα, Il-6, and IL-10 in the serum were determined using commercially available ELISA kits. We found a significant increase in anti-Rev1 antibody levels and simultaneously a significant decrease in the level of cellular immunity[DTH] in the treatment group compared to the control group. Lymphocyte proliferation index in splenocytes was significantly increased in the treatment group. However, the level of respiratory burst in phagocytic population of splenocytes dramatically decreased in the treatment group compared to the control. A significant decrease in IL-6, TNF-α , IL-1 and increaseIl-10 serum levels were also seen in the treatment group. Cynodon dactylon extract could have an anti-inflammatory effect through

  13. Infauna monitoring Horns Rev offshore wind farm. Annual status report 2003

    International Nuclear Information System (INIS)

    Bech, M.; Leonhars, S.B.; Pedersen, John

    2004-05-01

    ELSAM and ELTRA have established an offshore wind farm with an output of 160 MW in the waters of Horns Rev 1420 km off Blaevands Huk, which is the most westerly point of Denmark. The first phase of construction of the wind farm started in spring 2002. Before the construction activities took place, a baseline description of the benthos was conducted as a part of an environmental monitoring programme for the establishment of the Horns Rev Offshore Wind Farm. The baseline surveys for the present monitoring programme were conducted in the wind farm area on three occasions: spring 1999, spring 2001 and September 2001. In designated reference areas, surveys were conducted in spring 1999 and September 2001. The reference areas in 1999 and September 2001 were placed at two different geographical locations because the survey in September 2001 was planned to be a part of a fish monitoring programme. A comparison between the baseline study in spring 2001 and the baseline study in autumn 2001 clearly revealed that the biomass of most species increased considerably from spring to September. Despite the increase in biomass, the overall distribution of the species and their relative abundance did not change. In order to use the baseline data to investigate a possible impact after the construction of the wind farm, it was essential to arrange the monitoring programme either in spring or in September 2003, because the baseline studies were conducted in these periods. The monitoring programme was conducted in September 2003 after the wind farm had become operational, parallel with the survey on hard bottom substrates. The impacts of the wind farm on the benthic fauna (infauna) in the area were mainly expected to be due to the alteration of the local currents. As the changes in the currents are only minor, impacts on the water chemistry and on the benthic fauna resulting from hydrodynamic causes were expected to be limited or non-existent. The main objective of the present monitoring

  14. Infauna monitoring Horns Rev offshore wind farm. Annual state report 2004

    Energy Technology Data Exchange (ETDEWEB)

    Bech, M.; Frederiksen, R.; Pedersen, John; Leonhard, S.B.

    2005-04-15

    A total of 40 species were identified from the surveys in the Horns Rev area in September 2004 while 42 species were identified in 2003 and 47 species in September 2001. The decline in the number of species occurred both inside the wind farm and reference areas, which indicates that the decline could be a combination of changes in sediment characteristics and natural variation rather than an effect from the establishment of the wind farm. More species were not associated with the hard substrate at the turbine sites in 2004 compared to 2003, while in 2001, more species were associated with fine-grained sand. The median sediment grain size increased from 2001 to 2003 to 2004, which suggests that the velocity of the current increased, but modelling calculations on current speed predicted a 2% reduction in the wind farm area and up to a 15% reduction very close to the scour protection. These results agreed with the grain sizes found at the stations 5, 25 and 100 metres from the scour protection. At most stations, the medium grain size was 5 metres lower from the scour protection compared with the station 100 metres from the scour protection, which indicates that the velocity of the current was lower close to the scour protection. No significant impact on the infauna in the wind farm area was detectable concerning distance-related effects. Though general reductions in the population size of some of the character species in the surveyed areas might be related to changes in the sediment structure, the infauna community at Horns Rev showed no obvious sign of stress response as a consequence of possible impact from construction and operating activities. New species were observed in 2003 and 2004 and some of these might be a result of sediment characteristics, less predation or natural variation. The recording of other species might be a result of the introduction of hard bottom habitants in the wind farm area. The density of the most abundant bivalves and bristle worms was

  15. Horns Rev offshore wind power farm. Environmental impact assessment on water quality

    International Nuclear Information System (INIS)

    Andersen, Per

    2000-05-01

    As part of an overall Environmental Impact Assessment (EIA) undertaken in connection with a planned 150 MW offshore wind farm at Horns Rev, an assessment was made of the effects the wind farm would have on the water quality in the area. This EIA study was drawn up in accordance with the guidelines laid down by the Danish Ministry of Environment and Energy in the publication 'Guidelines for the preparation of EIA studies for offshore wind farms'. Horns Rev is situated off Blaevands Huk, which is Denmark's most westerly point. It is a shallow reef with water depths between 2 and 9 metres and is primarily composed of sand, gravel and pebbles. Only local and minor changes are anticipated in connection with the currents, sediments and wave conditions during the production phase. These will occur in the immediate vicinity of the individual foundations. For these reasons, no changes are expected in the water quality. This also includes also the pelagic primary production and the occurrence of plankton in the area. Increased local copper contamination of phytoplankton and zooplankton may be expected during the production phase, as a result of the total annual discharge of 206 kg copper from the slip-rings in the wind turbines. The contamination will potentially result in a local reduction of the pelagic primary production and changes in the species composition of the plankton. The wind turbines will be sandblasted and painted once during their lifetime, as part of the routine maintenance. The sandblasting and painting will lead to a temporary spill of paint, paint waste and sand. The impacts on water quality and plankton production are unknown. It is recommended that factors such as the toxicity of the paint be investigated, and that spills and the impact of waste be reduced as much as possible. The water quality and the plankton in the wind farm area and along the cable line's passage to shore through the international protected area, will only be affected in a minor way

  16. Infauna monitoring Horns Rev offshore wind farm. Annual status report 2004

    International Nuclear Information System (INIS)

    Bech, M.; Frederiksen, R.; Pedersen, John; Leonhard, S.B.

    2005-04-01

    A total of 40 species were identified from the surveys in the Horns Rev area in September 2004 while 42 species were identified in 2003 and 47 species in September 2001. The decline in the number of species occurred both inside the wind farm and reference areas, which indicates that the decline could be a combination of changes in sediment characteristics and natural variation rather than an effect from the establishment of the wind farm. More species were not associated with the hard substrate at the turbine sites in 2004 compared to 2003, while in 2001, more species were associated with fine-grained sand. The median sediment grain size increased from 2001 to 2003 to 2004, which suggests that the velocity of the current increased, but modelling calculations on current speed predicted a 2% reduction in the wind farm area and up to a 15% reduction very close to the scour protection. These results agreed with the grain sizes found at the stations 5, 25 and 100 metres from the scour protection. At most stations, the medium grain size was 5 metres lower from the scour protection compared with the station 100 metres from the scour protection, which indicates that the velocity of the current was lower close to the scour protection. No significant impact on the infauna in the wind farm area was detectable concerning distance-related effects. Though general reductions in the population size of some of the character species in the surveyed areas might be related to changes in the sediment structure, the infauna community at Horns Rev showed no obvious sign of stress response as a consequence of possible impact from construction and operating activities. New species were observed in 2003 and 2004 and some of these might be a result of sediment characteristics, less predation or natural variation. The recording of other species might be a result of the introduction of hard bottom habitants in the wind farm area. The density of the most abundant bivalves and bristle worms was

  17. Infauna monitoring Horns Rev offshore wind farm. Annual status report 2003

    Energy Technology Data Exchange (ETDEWEB)

    Bech, M.; Leonhars, S.B.; Pedersen, John

    2004-05-15

    ELSAM and ELTRA have established an offshore wind farm with an output of 160 MW in the waters of Horns Rev 1420 km off Blaevands Huk, which is the most westerly point of Denmark. The first phase of construction of the wind farm started in spring 2002. Before the construction activities took place, a baseline description of the benthos was conducted as a part of an environmental monitoring programme for the establishment of the Horns Rev Offshore Wind Farm. The baseline surveys for the present monitoring programme were conducted in the wind farm area on three occasions: spring 1999, spring 2001 and September 2001. In designated reference areas, surveys were conducted in spring 1999 and September 2001. The reference areas in 1999 and September 2001 were placed at two different geographical locations because the survey in September 2001 was planned to be a part of a fish monitoring programme. A comparison between the baseline study in spring 2001 and the baseline study in autumn 2001 clearly revealed that the biomass of most species increased considerably from spring to September. Despite the increase in biomass, the overall distribution of the species and their relative abundance did not change. In order to use the baseline data to investigate a possible impact after the construction of the wind farm, it was essential to arrange the monitoring programme either in spring or in September 2003, because the baseline studies were conducted in these periods. The monitoring programme was conducted in September 2003 after the wind farm had become operational, parallel with the survey on hard bottom substrates. The impacts of the wind farm on the benthic fauna (infauna) in the area were mainly expected to be due to the alteration of the local currents. As the changes in the currents are only minor, impacts on the water chemistry and on the benthic fauna resulting from hydrodynamic causes were expected to be limited or non-existent. The main objective of the present monitoring

  18. Statics of deformable solids

    CERN Document Server

    Bisplinghoff, Raymond L; Pian, Theodore HH

    2014-01-01

    Profusely illustrated exposition of fundamentals of solid mechanics and principles of mechanics, statics, and simple statically indeterminate systems. Covers strain and stress in three-dimensional solids, elementary elasticity, energy principles in solid continuum, and more. 1965 edition.

  19. Comment on “Magnetic geometry and physics of advanced divertors: The X-divertor and the snowflake” [Phys. Plasmas 20, 102507 (2013)

    International Nuclear Information System (INIS)

    Ryutov, D. D.; Cohen, R. H.; Rognlien, T. D.; Soukhanovskii, V. A.; Umansky, M. V.

    2014-01-01

    In the recently published paper “Magnetic geometry and physics of advanced divertors: The X-divertor and the snowflake” [Phys. Plasmas 20, 102507 (2013)], the authors raise interesting and important issues concerning divertor physics and design. However, the paper contains significant errors: (a) The conceptual framework used in it for the evaluation of divertor “quality” is reduced to the assessment of the magnetic field structure in the outer Scrape-Off Layer. This framework is incorrect because processes affecting the pedestal, the private flux region and all of the divertor legs (four, in the case of a snowflake) are an inseparable part of divertor operation. (b) The concept of the divertor index focuses on only one feature of the magnetic field structure and can be quite misleading when applied to divertor design. (c) The suggestion to rename the divertor configurations experimentally realized on NSTX (National Spherical Torus Experiment) and DIII-D (Doublet III-D) from snowflakes to X-divertors is not justified: it is not based on comparison of these configurations with the prototypical X-divertor, and it ignores the fact that the NSTX and DIII-D poloidal magnetic field geometries fit very well into the snowflake “two-null” prescription

  20. Corrigendum to “Multi-modal Fission in Collinear Ternary Cluster decay of 252Cf(sf,fff” [Phys. Lett. B 746 (2015 223

    Directory of Open Access Journals (Sweden)

    W. von Oertzen

    2017-02-01

    Full Text Available The scale of the ordinate axis of Fig. 4 on page 226 of PLB 746 (2015 223 was incorrect. The new version of Fig. 4 (which is “Fig. 1” in the present note with the correct ordinate axis is given here (upper part. The lower part shows the previous version. Five potential wells and barriers are shown. Considering a sequential process, two barriers are relevant for the sequential decay, with equal barriers for the symmetric cases with a smaller fragment at the center (in these cases only one barrier is shown. For the asymmetric case of 70Ni + 50Ca + 132Sn, two different barriers appear, denoted as (B1 and (B2, which correspond to the interactions of the middle cluster 50Ca with the outer nuclei 70Ni and 132Sn, respectively. In a sequential mechanism the separation of 132Sn from the other part via the barrier B2 has the smaller height, thus it is favored for the first step. For the second step the barrier (B1 between Ni and Ca, appears at smaller distances (dot-dashed curve and is higher. The order of the barriers of the five channels is unchanged, compared to the figure in Ref. W. von Oertzen et al., Phys. Lett. B 746 (2015 223.

  1. Theoretical solid state physics

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Research activities at ORNL in theoretical solid state physics are described. Topics covered include: surface studies; particle-solid interactions; electronic and magnetic properties; and lattice dynamics

  2. Bird numbers and distribution in the Horns Rev offshore wind farm area. Annual status report 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This report presents data from six aerial surveys of birds in the Horns Rev wind farm area in 2003. Including 16 surveys conducted before construction of the wind farm started and three during the construction phase, a total of 25 surveys have been performed in the area since August 1999. Up until August 2002 the study area was surveyed from 26 north-south oriented, parallel transect lines. After that time four short transects were added eastwards from the previously easternmost transect. From August 2002 slight adjustments to the transect lines in the wind farm area had to be made in order to avoid collision, as survey altitude was 76 m and wind turbines are 110 m to highest wing tip. The six surveys in 2003 were performed on 13 February, 16 March, 23 April, 5 September, 4 and 30 December. The operational phase of the wind farm commenced in 2002. Hence the six surveys from 2003 are all considered post-construction data sets. A preliminary evaluation of the potential impact of the wind turbines on bird distributions has been carried out by comparison of these data to those from the 16 pre-construction surveys. (au)

  3. Domain- and nucleotide-specific Rev response element regulation of feline immunodeficiency virus production

    Science.gov (United States)

    Na, Hong; Huisman, Willem; Ellestad, Kristofor K.; Phillips, Tom R.; Power, Christopher

    2010-01-01

    Computational analysis of feline immunodeficiency virus (FIV) RNA sequences indicated that common FIV strains contain a rev response element (RRE) defined by a long unbranched hairpin with 6 stem-loop sub-domains, termed stem-loop A (SLA). To examine the role of the RNA secondary structure of the RRE, mutational analyses were performed in both an infectious FIV molecular clone and a FIV CAT-RRE reporter system. These studies disclosed that the stems within SLA (SA1, 2, 3, 4, and 5) of the RRE were critical but SA6 was not essential for FIV replication and CAT expression. These studies also revealed that the secondary structure rather than an antisense protein (ASP) mediates virus expression and replication in vitro. In addition, a single synonymous mutation within the FIV-RRE, SA3/45, reduced viral reverse transcriptase activity and p24 expression after transfection but in addition also showed a marked reduction in viral expression and production following infection. PMID:20570310

  4. ???????????? SolidWorks/SolidWorks Flow Simulation/SolidWorks Simulation ??? ?????????? ???????? ?? ????????????? ???

    OpenAIRE

    ????????????, ?. ?.; ????????, ?. ?.; ?????, ?. ?.

    2012-01-01

    ? ?????? ???????? ??????? ??????? ???????? ?? ???????????? ??????????? ????????? SolidWorks/SolidWorks Flow Simulation (COSMOSFloWorks)/SolidWorks Simulation ??? ?????????? ???????? ?? ????????????? ???. ??? ???????? ????????? ???????? ?????????? ?? ?????? ???????? ??????? ? ????????????? ?????? ? ????????????? ????????????? ?????????? ???????????? SolidWorks Flow Simulation (COSMOSFloWorks). ??? ???????????? ??????????? ????????????? ?????? ?? ????????? ??????????? ??????? ?? ??????????? ...

  5. Resposta imunitária à vacinação conjuntival com a estirpe Rev.1 de Brucella melitensis em ovinos e caprinos Serological response of sheep and goats to conjunctival Brucella melitensis Rev.1 vaccine

    Directory of Open Access Journals (Sweden)

    P. Poeta

    2003-04-01

    Full Text Available The live B. melitensis Rev.1 strain is considered the best vaccine available for the prophylaxis of brucellosis in small ruminants, especially when used at the standard dose by the conjunctival route. In the present study a 1´ 10(9 CFU dose for both sheep and goats conjunctivally vaccinated was tested to evaluate the duration of serological responses. Conjunctival vaccination with Rev. 1 performed in adult animals induced a rapid rise in serological titres as measured by Rose Bengal Plate Test (RBPT, Complement Fixation Test (CF and Modified Rose Bengal Plate Test (MRBPT. Titres then decreased and became negative in most animals by four months after vaccination (except MRBPT. The goats responded better to the vaccination than the sheep as one month after vaccination 100% of the goats revealed positive results to RB and RBM and 93.4% to FC test. The RBM was the one that detected more positive animals along the study.

  6. Administrative circulars No. 22A (rev. 1) – Award of additional periods of membership in the Pensions Fund for long-term shift work and No. 22B (rev. 1) – Compensation for long-term shift work hours

    CERN Multimedia

    HR Department

    2011-01-01

    Administrative Circulars No. 22A (Rev. 1) entitled "Award of additional periods of membership in the Pension Fund for long-term shift work" and No. 22B (Rev.1) entitled “Compensation for long-term shift work hours”, adopted following discussion in the Standing Concertation Committee meeting of 21 September 2010 and entering into force on 1 March 2011, are available on the intranet site of the Human Resources Department: http://cern.ch/hr-docs/admincirc/admincirc.asp They cancel and replace Administrative Circulars No. 22A and 22B entitled "Award of additional periods of membership in the Pension Fund to shift workers (Early Departure)” and “Duration and special compensation for shift work” of January 2000. This new version clarifies, in particular, the compensation of effective long-term shift work hours. Department Head Office  

  7. Solid lubricants and surfaces

    CERN Document Server

    Braithwaite, E R

    1964-01-01

    Solid Lubricants and Surfaces deals with the theory and use of solid lubricants, particularly in colloidal form. Portions of this book are devoted to graphite and molybdenum disulfides, which are widely used solid lubricants in colloidal form. An extensive literature on the laboratory examination of hundreds of solids as potential lubricants is also provided in this text. Other topics discussed include the metals and solid lubricants; techniques for examining surfaces; other solid lubricants; metal shaping; and industrial uses of solid-lubricant dispersions. This publication is beneficial to e

  8. HRensembleHR. High resolution ensemble for Horns Rev. Final project report; Offshore wind power

    Energy Technology Data Exchange (ETDEWEB)

    2010-03-15

    The wind farm output of an offshore-farm such as Horns Rev changes between nearly constant output to highly variable power output. A balance responsible will therefore benefit from knowing the variability of a wind farm in advance. Some understanding of the observed variability and the corresponding forecast error on offshore wind farms had been gathered in the past few years, while a large fraction (about 60%) of the error still lacked understanding and required further intense research. This was the outset at the beginning of the HREnsemble project. Results from the wave study, variability study, ocean coupling, findings from the sensitivity experiments, the iEnKF short-term forecast and finally the demonstration phase have given significant synergy. The most basic research result in the project is that the two empirical mode decomposition approaches, Hilbert-Huang and later the Ensemble Empirical Mode Decomposition (EEMD). Both approaches confirmed that significant variability exists in offshore conditions. It was found that the variability of the short time-scales (24 minutes) are either not explicitly visible in the grid-scale of the NWP models or in the best case significantly smoothed out in all of the tested model configurations. If we interpret 2/3 of the variability due to vertical waves not present in the mean flow and 1/3 of the variability due to meso-scale weather, then the model results and EEMD are consistent. We can however not verify this theory. At present we do not know if EEMD counts neither the events correct nor whether the ensemble forecast suppresses variability. The existence of variability above the time-scale related to friction between ocean waves and air can in fact explain some of the inconsistent results published in the literature and set a question mark behind the correctness of the calculation of friction in wave, ocean and weather modelling. (LN)

  9. Solid waste management

    OpenAIRE

    Srebrenkoska, Vineta; Golomeova, Saska; Zhezhova, Silvana

    2013-01-01

    Waste is unwanted or useless materials from households, industry, agriculture, hospitals. Waste materials in solid state are classified as solid waste. Increasing of the amount of solid waste and the pressure what it has on the environment, impose the need to introduce sustainable solid waste management. Advanced sustainable solid waste management involves several activities at a higher level of final disposal of the waste management hierarchy. Minimal use of material and energy resources ...

  10. NES consensus redefined by structures of PKI-type and Rev-type nuclear export signals bound to CRM1.

    Science.gov (United States)

    Güttler, Thomas; Madl, Tobias; Neumann, Piotr; Deichsel, Danilo; Corsini, Lorenzo; Monecke, Thomas; Ficner, Ralf; Sattler, Michael; Görlich, Dirk

    2010-11-01

    Classic nuclear export signals (NESs) confer CRM1-dependent nuclear export. Here we present crystal structures of the RanGTP-CRM1 complex alone and bound to the prototypic PKI or HIV-1 Rev NESs. These NESs differ markedly in the spacing of their key hydrophobic (Φ) residues, yet CRM1 recognizes them with the same rigid set of five Φ pockets. The different Φ spacings are compensated for by different conformations of the bound NESs: in the case of PKI, an α-helical conformation, and in the case of Rev, an extended conformation with a critical proline docking into a Φ pocket. NMR analyses of CRM1-bound and CRM1-free PKI NES suggest that CRM1 selects NES conformers that pre-exist in solution. Our data lead to a new structure-based NES consensus, and explain why NESs differ in their affinities for CRM1 and why supraphysiological NESs bind the exportin so tightly.

  11. ADMINISTRATIVE CIRCULAR No. 25 (REV. 3) - Special provisions for the fire and rescue service governing working and rest time

    CERN Multimedia

    2012-01-01

    Administrative Circular No. 25 (Rev. 3) entitled “Special provisions for the Fire and Rescue Service governing working and rest time”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 28 September 2012 and entering into force in October 2012, is available on the intranet site of the Human Resources Department: http://cern.ch/hr-docs/admincirc/admincirc.asp This Circular is applicable to staff members of the Fire and Rescue Service It cancels and replaces Administrative Circular No. 25 (Rev. 2) entitled “Shift work – Special provisions for the Fire and Rescue Service” of April 2003. This new version takes into account the new organisation of the Fire and Rescue Service, members of which will henceforth not exclusively perform their functions in the context of shift work, but also during reference working hours and during stand-by duty. Additionally, applicable limits regarding working and rest times an...

  12. Operational Circular No.2 (Rev. 2) - Conditions of access to the fenced parts of the CERN site

    CERN Multimedia

    2014-01-01

    Operational Circular No. 2 (Rev. 2) entitled “Conditions of access to the fenced parts of the CERN site” and its “implementation measures”, approved by the Director-General following discussion at the Standing Concertation Committee meeting on 20 May 2014 and entering into force on 1 September 2014, are available on the intranet site of the Human Resources Department (see here).   This circular is applicable to members of the personnel and other persons concerned. It cancels and replaces Operational Circular No. 2 (Rev. 1) entitled “Conditions of access to the fenced parts of the CERN site”, of April 1998. In particular, the revised circular provides for the possibility of mandating a person responsible for the proper implementation of the circular, specifies the rules relating to vehicles allowed on the site and the respective responsibilities of their owners, and relaxes certain administrative formalities in case of loss, theft or di...

  13. Operational Circular No. 2 (Rev. 3) - Conditions of access to the fenced parts of the CERN site

    CERN Multimedia

    HR Department

    2015-01-01

    Operational Circular No. 2 (Rev. 3) entitled "Conditions of access to the fenced parts of the CERN site", approved by the Director-General following discussion in the Standing Concertation Committee meeting on 24 September 2015, is now available via this link.   This revised circular cancels and replaces Operational Circular No. 2 (Rev. 2) also entitled "Conditions of access to the fenced parts of the CERN site", of September 2014. The circular was revised predominantly in order to specify that access to the CERN site is granted to CERN Pension Fund beneficiaries only provided that they are actually in receipt of payments from the Fund; and to allow the Director-General to permit special types of vehicles on site, such as trailers. It also includes a certain number of text improvements and an updated version of the implementation measures, in particular with regard to vehicle identification, road traffic and parking.  

  14. Administrative circular n°3 (Rev. 2) – Home leave, travel to home station and assimilated leave and travel

    CERN Multimedia

    2013-01-01

    Administrative Circular No. 3 (Rev. 2) entitled “Home leave, travel to the home station and assimilated leave and travel”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 11 October 2012 and entering into force on 1 January 2013, is available on the intranet site of the Human Resources Department.   This circular is applicable to employed members of the personnel. It cancels and replaces Administrative Circular No. 3 (Rev. 1) entitled “Travel to the home station and home leave” of June 2002. The circular was revised in order to take into account the new status of Associate Member State and the fact that henceforth, home stations may be situated on territory outside of Europe. It is proposed to introduce a new system of determination of the benefits (Travel expenses, travel time and distance indemnity) granted in the context of home leave and supplementary journeys to the home station.  For t...

  15. HRensembleHR. High resolution ensemble for Horns Rev. Final project report. Executive summary; Offshore wind power

    Energy Technology Data Exchange (ETDEWEB)

    2010-03-15

    The development of offshore wind power results in more energy production per area unit and new requirements to the generation forecasts. Measurements from Horns Rev and ensemble forecasts were used to upgrade forecasting tools for the relevant periods and time scales. The most significant development is a new algorithm for short-term forecasts that combines any relevant online measurements by means of ensemble forecasts. (ln)

  16. Evaluación externa en la LOMCE. Reválidas, exclusión y competitividad

    Directory of Open Access Journals (Sweden)

    Ángel I. Pérez Gómez

    2014-01-01

    Full Text Available La evaluación de las competencias o cualidades humanas que cada aprendiz ha de desarrollar de manera singular para afrontar la complejidad de la era digital contemporánea es incompatible con las reválidas, test y pruebas externas estandarizadas, iguales para todos. Las cualidades más importantes del aprendizaje en la era digital —autodirección, iniciativa, creatividad, pensamiento crítico, solución de problemas y autoevaluación— son difícilmente evaluables mediante instrumentos baratos y masivos «de papel y lápiz», como los test estandarizados o las reválidas externas; requieren, por el contrario, herramientas y procesos más complejos, plurales y flexibles como la observación continua de los equipos docentes sobre el quehacer y los procesos y productos de los aprendices (Soto Gómez, 2014. La LOMCE,1 fiel exponente de la pedagogía conservadora del movimiento GERM,2 recupera las reválidas, pues apuesta por la estandarización de aprendizajes superficiales en lugar de potenciar el desarrollo singular de cada aprendiz hasta el máximo de sus posibilidades.

  17. An analysis of international situation concerning nuclear security. Focused on the revision to INFCIRC/225/Rev.5

    International Nuclear Information System (INIS)

    Inamura, Tomoaki; Tanabe, Tomoyuki

    2011-01-01

    Since the September 11 attacks in 2001, counterterrorism measures have become not just domestic issues but critical issues that need international cooperation. Various nuclear security measures are in place as part of international counterterrorism measures. This report looks at the trend of international nuclear security measures to get implications for Japan, focusing on INFCIRC/225/Rev.5, an international guideline for physical protection of nuclear materials and nuclear facilities drawn up by IAEA. The observations of this report are as follows: 1) While legally binding nuclear security measures such as multilateral treaties and United Nations Security Council Resolutions impose minimum requirements on individual countries, the approaches led by IAEA or individual countries or private associations aim at more detailed consideration or information sharing to further improve nuclear security. 2) INFCIRC/225/Rev.5 comprises new concepts such as risk-based physical protection and nuclear security culture, as well as extended range of threats such as insiders or stand-off attacks and broader scope of measures to response. Japan should consider incorporation of INFCIRC/225/Rev.5 to its national laws and regulations putting in mind that it may have heavy influence and that Japan pledged to role leadership about nuclear security to international society. (author)

  18. Safety and efficacy of reduced doses of Brucella melitensis strain Rev. 1 vaccine in pregnant Iranian fat-tailed ewes

    Directory of Open Access Journals (Sweden)

    Mohammad Ebrahimi

    2012-12-01

    Full Text Available Brucellosis is one of the most important zoonotic diseases and is a significant cause of abortion in animals. Brucella melitensis strain Rev. 1 is recommended as the most effective vaccine for small ruminants but the application of full doses in adult animals is restricted. This study was conducted to determine a proper reduced dose of vaccine which confers protection but which is not abortifacient in Iranian fat-tailed sheep. A total of 51 non-vaccinated pregnant ewes were divided into three main groups and several subgroups. Ewes in different groups were vaccinated at different stages of pregnancy and various subgroups were subcutaneously immunised with different quantities of the micro-organism (7.5 × 106, 106, 5 × 105. Ewes again became pregnant a year later and were challenged with the wild-type strain to evaluate the protection conferred. Results revealed that the proportion of vaccination-induced abortions was significantly higher in ewes immunised with 7.5 × 106 Rev. 1 organisms than in those which received 106 or 5 × 105 bacteria. While 80% of non-vaccinated ewes aborted after challenge, none of the vaccinated ewes aborted post-challenge. This study indicated that a reduced dose of Rev. 1 vaccine containing 106 or 5 × 105 live cells could be safely used to induce protection in Iranian fat-tailed sheep at various stages of pregnancy.

  19. Self-consistent hybrid functionals for solids: a fully-automated implementation

    Science.gov (United States)

    Erba, A.

    2017-08-01

    A fully-automated algorithm for the determination of the system-specific optimal fraction of exact exchange in self-consistent hybrid functionals of the density-functional-theory is illustrated, as implemented into the public Crystal program. The exchange fraction of this new class of functionals is self-consistently updated proportionally to the inverse of the dielectric response of the system within an iterative procedure (Skone et al 2014 Phys. Rev. B 89, 195112). Each iteration of the present scheme, in turn, implies convergence of a self-consistent-field (SCF) and a coupled-perturbed-Hartree-Fock/Kohn-Sham (CPHF/KS) procedure. The present implementation, beside improving the user-friendliness of self-consistent hybrids, exploits the unperturbed and electric-field perturbed density matrices from previous iterations as guesses for subsequent SCF and CPHF/KS iterations, which is documented to reduce the overall computational cost of the whole process by a factor of 2.

  20. Physics, radiology, and chemistry. An introduction to natural science. 8. rev. ed.

    International Nuclear Information System (INIS)

    Linde, O.K.; Knigge, H.J.

    1991-01-01

    This book is an introduction to physics and chemistry especially for medical personnel. After a general introduction, measurement methods, mechanics including mechanics of solid bodies, fluids and gases, heat, optics, acoustics, electricity, radiations including their biological effects, general chemistry, inorganic and organic chemistry are treated. Every chapter contains exercises mostly in connection with medical and biological effects. Furthermore connections with biology and medicine are considered. (orig./HP) With 104 figs., 51 tabs [de

  1. Minimum-error quantum distinguishability bounds from matrix monotone functions: A comment on 'Two-sided estimates of minimum-error distinguishability of mixed quantum states via generalized Holevo-Curlander bounds' [J. Math. Phys. 50, 032106 (2009)

    International Nuclear Information System (INIS)

    Tyson, Jon

    2009-01-01

    Matrix monotonicity is used to obtain upper bounds on minimum-error distinguishability of arbitrary ensembles of mixed quantum states. This generalizes one direction of a two-sided bound recently obtained by the author [J. Tyson, J. Math. Phys. 50, 032106 (2009)]. It is shown that the previously obtained special case has unique properties.

  2. Response to “Comment on ‘Magnetic geometry and physics of advanced divertors: The X-divertor and the snowflake’ ” [Phys. Plasmas 21, 054701 (2014)

    International Nuclear Information System (INIS)

    Kotschenreuther, Mike; Valanju, Prashant; Covele, Brent; Mahajan, Swadesh

    2014-01-01

    Relying on coil positions relative to the plasma, the “Comment on ‘Magnetic geometry and physics of advanced divertors: The X-divertor and the snowflake’ ” [Phys. Plasmas 21, 054701 (2014)], emphasizes a criterion for divertor characterization that was critiqued to be ill posed [M. Kotschenreuther et al., Phys. Plasmas 20, 102507 (2013)]. We find that no substantive physical differences flow from this criteria. However, using these criteria, the successful NSTX experiment by Ryutov et al. [Phys. Plasmas 21, 054701 (2014)] has the coil configuration of an X-divertor (XD), rather than a snowflake (SF). On completing the divertor index (DI) versus distance graph for this NSTX shot (which had an inexplicably missing region), we find that the DI is like an XD for most of the outboard wetted divertor plate. Further, the “proximity condition,” used to define an SF [M. Kotschenreuther et al., Phys. Plasmas 20, 102507 (2013)], does not have a substantive physics basis to override metrics based on flux expansion and line length. Finally, if the criteria of the comment are important, then the results of NSTX-like experiments could have questionable applicability to reactors

  3. Response to “Comment on ‘Magnetic geometry and physics of advanced divertors: The X-divertor and the snowflake’ ” [Phys. Plasmas 21, 054701 (2014)

    Energy Technology Data Exchange (ETDEWEB)

    Kotschenreuther, Mike; Valanju, Prashant; Covele, Brent; Mahajan, Swadesh [Institute for Fusion Studies, The University of Texas at Austin, Austin, Texas 78712 (United States)

    2014-05-15

    Relying on coil positions relative to the plasma, the “Comment on ‘Magnetic geometry and physics of advanced divertors: The X-divertor and the snowflake’ ” [Phys. Plasmas 21, 054701 (2014)], emphasizes a criterion for divertor characterization that was critiqued to be ill posed [M. Kotschenreuther et al., Phys. Plasmas 20, 102507 (2013)]. We find that no substantive physical differences flow from this criteria. However, using these criteria, the successful NSTX experiment by Ryutov et al. [Phys. Plasmas 21, 054701 (2014)] has the coil configuration of an X-divertor (XD), rather than a snowflake (SF). On completing the divertor index (DI) versus distance graph for this NSTX shot (which had an inexplicably missing region), we find that the DI is like an XD for most of the outboard wetted divertor plate. Further, the “proximity condition,” used to define an SF [M. Kotschenreuther et al., Phys. Plasmas 20, 102507 (2013)], does not have a substantive physics basis to override metrics based on flux expansion and line length. Finally, if the criteria of the comment are important, then the results of NSTX-like experiments could have questionable applicability to reactors.

  4. Solid state physics

    CERN Document Server

    Burns, Gerald

    2013-01-01

    Solid State Physics, International Edition covers the fundamentals and the advanced concepts of solid state physics. The book is comprised of 18 chapters that tackle a specific aspect of solid state physics. Chapters 1 to 3 discuss the symmetry aspects of crystalline solids, while Chapter 4 covers the application of X-rays in solid state science. Chapter 5 deals with the anisotropic character of crystals. Chapters 6 to 8 talk about the five common types of bonding in solids, while Chapters 9 and 10 cover the free electron theory and band theory. Chapters 11 and 12 discuss the effects of moveme

  5. Theoretical solid state physics

    CERN Document Server

    Haug, Albert

    2013-01-01

    Theoretical Solid State Physics, Volume 1 focuses on the study of solid state physics. The volume first takes a look at the basic concepts and structures of solid state physics, including potential energies of solids, concept and classification of solids, and crystal structure. The book then explains single-electron approximation wherein the methods for calculating energy bands; electron in the field of crystal atoms; laws of motion of the electrons in solids; and electron statistics are discussed. The text describes general forms of solutions and relationships, including collective electron i

  6. Accurate treatment of solids with the HSE screened hybrid

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, Thomas M.; Paier, Joachim; Scuseria, Gustavo E. [Department of Chemistry and Department of Physics and Astronomy, Rice University, Houston, TX 77005 (United States); Department of Physics and Astronomy, Rice University, Houston, TX 77005 (United States)

    2011-04-15

    Density functional theory (DFT) is the most widely used technique in the realm of first-principles electronic structure methods. Principally, this is because DFT in the Kohn-Sham (KS) formalism offers the appealing combination of relatively high accuracy and relatively low computational cost. Despite their great successes, traditional semilocal functionals fail to describe some important problems in solid state physics and materials science, the most conspicuous example being the notorious band gap problem. More sophisticated functionals providing greater accuracy without sacrificing computational efficiency are therefore needed. The Heyd-Scuseria-Ernzerhof (HSE) screened hybrid density functional [J. Heyd, G. E. Scuseria, and M. Ernzerhof, J. Chem. Phys. 118, 8207 (2003); J. Heyd and G. E. Scuseria, J. Chem. Phys. 121, 1187 (2004)] successfully addresses some of the chief problems which plague semilocal functionals by including only the important parts of exact nonlocal Hartree-Fock-type exchange. This work discusses some of the concepts underlying HSE and provides illustrative examples highlighting the successes of HSE in numerous solid state applications. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  7. Solid phase radioimmunoassays

    International Nuclear Information System (INIS)

    Wide, L.

    1977-01-01

    Solid phase coupled antibodies were introduced to facilitate the separation of bound and free labelled ligand in the competitive inhibition radioimmunoassay. Originally, the solid matrix used was in the form of small particles and since then a number of different matrices have been used such as very fine powder particles, gels, paper and plastic discs, magnetic particles and the inside surface of plastic tubes. The coupling of antibodies may be that of a covalent chemical binding, a strong physical adsorbtion, or an immunological binding to a solid phase coupled antigen. New principles of radioimmunoassay such as the solid phase sandwich techniques and the immunoradiometric assay were developped from the use of solid phase coupled antigens and antibodies. The solid phase sandwich techniques are reagent excess methods with a very wide applicability. Several of the different variants of solid phase techniques are suitable for automation. Advantages and disadvantages of solid phase radioimmunoassays when compared with those using soluble reagents are discussed. (orig.) [de

  8. Laser cooling of solids

    Energy Technology Data Exchange (ETDEWEB)

    Epstein, Richard I [Los Alamos National Laboratory; Sheik-bahae, Mansoor [UNM

    2008-01-01

    We present an overview of solid-state optical refrigeration also known as laser cooling in solids by fluorescence upconversion. The idea of cooling a solid-state optical material by simply shining a laser beam onto it may sound counter intuitive but is rapidly becoming a promising technology for future cryocooler. We chart the evolution of this science in rare-earth doped solids and semiconductors.

  9. hREV3 is essential for error-prone translesion synthesis past UV or benzo[a]pyrene diol epoxide-induced DNA lesions in human fibroblasts

    Energy Technology Data Exchange (ETDEWEB)

    Li Ziqiang; Zhang Hong; McManus, Terrence P.; McCormick, J. Justin; Lawrence, Christopher W.; Maher, Veronica M

    2002-12-29

    In S. cerevisiae, the REV3 gene, encoding the catalytic subunit of polymerase zeta, is involved in translesion synthesis and required for the production of mutations induced by ultraviolet radiation (UV) photoproducts and other DNA fork-blocking lesions, and for the majority of spontaneous mutations. To determine whether hREV3, the human homolog of yeast REV3, is similarly involved in error-prone translesion synthesis past UV photoproducts and other lesions that block DNA replication, an hREV3 antisense construct under the control of the TetP promoter was transfected into an infinite life span human fibroblast cell strain that expresses a high level of tTAk, the activator of that promoter. Three transfectant strains expressing high levels of hREV3 antisense RNA were identified and compared with their parental cell strain for sensitivity to the cytotoxic and mutagenic effects of UV. The three hREV3 antisense-expressing cell strains were not more sensitive than the parental strain to the cytotoxic effect of UV, but the frequency of mutants induced by UV in their HPRT gene was significantly reduced, i.e. to 14% that of the parent. Two of these hREV3 antisense-expressing cell strains were compared with the parental strain for sensitivity to ({+-})-7{beta},8{alpha}-dihydroxy-9{alpha},10{alpha}-epoxy-7,8,9,10-tetrahydro= benzo[a]pyrene (BPDE). They were not more sensitive than the parent strain to the cytotoxic effect of BPDE, but the frequency of mutants induced was significantly reduced, i.e. in one strain, to 17% that of the parent, and in the other, to 24%. DNA sequencing showed that the kinds of mutations induced by BPDE in the parental and the derivative strains did not differ and were similar to those found previously with finite life span human fibroblasts. The data strongly support the hypothesis that hRev3 plays a critical role in the induction of mutations by UV or BPDE. Because the level of hRev3 protein in human fibroblasts is below the level of antibody

  10. hREV3 is essential for error-prone translesion synthesis past UV or benzo[a]pyrene diol epoxide-induced DNA lesions in human fibroblasts

    International Nuclear Information System (INIS)

    Li Ziqiang; Zhang Hong; McManus, Terrence P.; McCormick, J. Justin; Lawrence, Christopher W.; Maher, Veronica M.

    2002-01-01

    In S. cerevisiae, the REV3 gene, encoding the catalytic subunit of polymerase zeta, is involved in translesion synthesis and required for the production of mutations induced by ultraviolet radiation (UV) photoproducts and other DNA fork-blocking lesions, and for the majority of spontaneous mutations. To determine whether hREV3, the human homolog of yeast REV3, is similarly involved in error-prone translesion synthesis past UV photoproducts and other lesions that block DNA replication, an hREV3 antisense construct under the control of the TetP promoter was transfected into an infinite life span human fibroblast cell strain that expresses a high level of tTAk, the activator of that promoter. Three transfectant strains expressing high levels of hREV3 antisense RNA were identified and compared with their parental cell strain for sensitivity to the cytotoxic and mutagenic effects of UV. The three hREV3 antisense-expressing cell strains were not more sensitive than the parental strain to the cytotoxic effect of UV, but the frequency of mutants induced by UV in their HPRT gene was significantly reduced, i.e. to 14% that of the parent. Two of these hREV3 antisense-expressing cell strains were compared with the parental strain for sensitivity to (±)-7β,8α-dihydroxy-9α,10α-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (BPDE). They were not more sensitive than the parent strain to the cytotoxic effect of BPDE, but the frequency of mutants induced was significantly reduced, i.e. in one strain, to 17% that of the parent, and in the other, to 24%. DNA sequencing showed that the kinds of mutations induced by BPDE in the parental and the derivative strains did not differ and were similar to those found previously with finite life span human fibroblasts. The data strongly support the hypothesis that hRev3 plays a critical role in the induction of mutations by UV or BPDE. Because the level of hRev3 protein in human fibroblasts is below the level of antibody detection, it was not

  11. Stimulation of nuclear receptor REV-ERBs regulates tumor necrosis factor-induced expression of proinflammatory molecules in C6 astroglial cells

    Energy Technology Data Exchange (ETDEWEB)

    Morioka, Norimitsu, E-mail: mnori@hiroshima-u.ac.jp; Tomori, Mizuki; Zhang, Fang Fang; Saeki, Munenori; Hisaoka-Nakashima, Kazue; Nakata, Yoshihiro

    2016-01-08

    Under physiological conditions, astrocytes maintain homeostasis in the CNS. Following inflammation and injury to the CNS, however, activated astrocytes produce neurotoxic molecules such as cytokines and chemokines, amplifying the initial molecular-cellular events evoked by inflammation and injury. Nuclear receptors REV-ERBα and REV-ERBβ (REV-ERBs) are crucial in the regulation of inflammation- and metabolism-related gene transcription. The current study sought to elucidate a role of REV-ERBs in rat C6 astroglial cells on the expression of inflammatory molecules following stimulation with the neuroinflammatory cytokine tumor necrosis factor (TNF). Stimulation of C6 cells with TNF (10 ng/ml) significantly increased the mRNA expression of CCL2, interleukin-6 (IL-6), inducible nitric oxide synthase (iNOS), and matrix metalloprotease (MMP)-9, but not fibroblast growth factor-2 (FGF-2), cyclooxygenase-2 (COX-2) and MMP-2. Treatment with either REV-ERB agonists GSK4112 or SR9009 significantly blocked TNF-induced upregulation of CCL2 mRNA and MMP-9 mRNA, but not IL-6 mRNA and iNOS mRNA expression. Furthermore, treatment with RGFP966, a selective histone deacetylase 3 (HDAC3) inhibitor, potently reversed the inhibitory effects of GSK4112 on TNF-induced expression of MMP-9 mRNA, but not CCL2 mRNA. Expression of Rev-erbs mRNA in C6 astroglial cells, primary cultured rat cortical and spinal astrocytes was confirmed by reverse transcription polymerase chain reaction. Together, the findings demonstrate an anti-inflammatory effect, downregulating of MMP-9 and CCL2 transcription, of astroglial REV-ERBs activation through HDAC3-dependent and HDAC3-independent mechanisms. - Highlights: • Rev-erbα mRNA and Rev-erbβ mRNA are expressed in C6 astroglial cells. • TNF increases the expression of CCL2, IL-6, MMP-9 and iNOS mRNA. • REV-ERB activation inhibits CCL2 mRNA and MMP-9 mRNA expression. • HDAC3 activity is involved in the inhibitory effect of REV-ERB on MMP-9 induction.

  12. Stimulation of nuclear receptor REV-ERBs regulates tumor necrosis factor-induced expression of proinflammatory molecules in C6 astroglial cells

    International Nuclear Information System (INIS)

    Morioka, Norimitsu; Tomori, Mizuki; Zhang, Fang Fang; Saeki, Munenori; Hisaoka-Nakashima, Kazue; Nakata, Yoshihiro

    2016-01-01

    Under physiological conditions, astrocytes maintain homeostasis in the CNS. Following inflammation and injury to the CNS, however, activated astrocytes produce neurotoxic molecules such as cytokines and chemokines, amplifying the initial molecular-cellular events evoked by inflammation and injury. Nuclear receptors REV-ERBα and REV-ERBβ (REV-ERBs) are crucial in the regulation of inflammation- and metabolism-related gene transcription. The current study sought to elucidate a role of REV-ERBs in rat C6 astroglial cells on the expression of inflammatory molecules following stimulation with the neuroinflammatory cytokine tumor necrosis factor (TNF). Stimulation of C6 cells with TNF (10 ng/ml) significantly increased the mRNA expression of CCL2, interleukin-6 (IL-6), inducible nitric oxide synthase (iNOS), and matrix metalloprotease (MMP)-9, but not fibroblast growth factor-2 (FGF-2), cyclooxygenase-2 (COX-2) and MMP-2. Treatment with either REV-ERB agonists GSK4112 or SR9009 significantly blocked TNF-induced upregulation of CCL2 mRNA and MMP-9 mRNA, but not IL-6 mRNA and iNOS mRNA expression. Furthermore, treatment with RGFP966, a selective histone deacetylase 3 (HDAC3) inhibitor, potently reversed the inhibitory effects of GSK4112 on TNF-induced expression of MMP-9 mRNA, but not CCL2 mRNA. Expression of Rev-erbs mRNA in C6 astroglial cells, primary cultured rat cortical and spinal astrocytes was confirmed by reverse transcription polymerase chain reaction. Together, the findings demonstrate an anti-inflammatory effect, downregulating of MMP-9 and CCL2 transcription, of astroglial REV-ERBs activation through HDAC3-dependent and HDAC3-independent mechanisms. - Highlights: • Rev-erbα mRNA and Rev-erbβ mRNA are expressed in C6 astroglial cells. • TNF increases the expression of CCL2, IL-6, MMP-9 and iNOS mRNA. • REV-ERB activation inhibits CCL2 mRNA and MMP-9 mRNA expression. • HDAC3 activity is involved in the inhibitory effect of REV-ERB on MMP-9 induction.

  13. Solid State Division

    International Nuclear Information System (INIS)

    Green, P.H.; Watson, D.M.

    1989-08-01

    This report contains brief discussions on work done in the Solid State Division of Oak Ridge National Laboratory. The topics covered are: Theoretical Solid State Physics; Neutron scattering; Physical properties of materials; The synthesis and characterization of materials; Ion beam and laser processing; and Structure of solids and surfaces

  14. Solid State Division

    Energy Technology Data Exchange (ETDEWEB)

    Green, P.H.; Watson, D.M. (eds.)

    1989-08-01

    This report contains brief discussions on work done in the Solid State Division of Oak Ridge National Laboratory. The topics covered are: Theoretical Solid State Physics; Neutron scattering; Physical properties of materials; The synthesis and characterization of materials; Ion beam and laser processing; and Structure of solids and surfaces. (LSP)

  15. Solid state radiation dosimetry

    International Nuclear Information System (INIS)

    Moran, P.R.

    1976-01-01

    Important recent developments provide accurate, sensitive, and reliable radiation measurements by using solid state radiation dosimetry methods. A review of the basic phenomena, devices, practical limitations, and categories of solid state methods is presented. The primary focus is upon the general physics underlying radiation measurements with solid state devices

  16. Wet-Chemical Synthesis of Enhanced-Thermopower Bi1 -xSbx Nanowire Composites for Solid-State Active Cooling of Electronics

    Science.gov (United States)

    Vandaele, K.; He, Bin; Van Der Voort, P.; De Buysser, K.; Heremans, J. P.

    2018-02-01

    This paper is a contribution to the Physical Review Applied collection in memory of Mildred S. Dresselhaus. In 1993, Hicks and Dresselhaus [Thermoelectric figure of merit of a one-dimensional conductor, Phys. Rev. B 47, 16631 (1993)., 10.1103/PhysRevB.47.16631] suggested that Bi nanowires could result in values of the thermoelectric figure of merit z T >1 . The Dresselhaus group also calculated a ternary phase diagram for Bi1 -xSbx nanowires as a function of x and wire diameter. This manuscript reports a wet-chemical method to synthesize Bi1 -xSbx -silica nanowire composites. Resistivity, Hall electron concentration, electron mobility, Seebeck and Nernst coefficients, and thermal conductivity of composites are measured and compared to bulk polycrystalline Bi1 -xSbx samples prepared either by ingot casting or by the same wet chemistry but without nanostructuring. A clear increase of the thermopower in 20-nm Bi94Sb6 -silica is reported when compared to bulk samples, and the values are among the highest found in the literature from 300 to 380 K, even though the electron concentration is higher than in the bulk. This suggests that consistent with theory, size quantization is responsible for the thermopower increase.

  17. Combustibility of tetraphenylborate solids

    International Nuclear Information System (INIS)

    Walker, D.D.

    1989-01-01

    Liquid slurries expected under normal in-tank processing (ITP) operations are not ignitible because of their high water content. However, deposits of dry solids from the slurries are combustible and produce dense, black smoke when burned. The dry solids burn similarly to Styrofoam and more easily than sawdust. It is the opinion of fire hazard experts that a benzene vapor deflagration could ignite the dry solids. A tetraphenylborate solids fire will rapidly plug the waste tank HEPA ventilation filters due to the nature of the smoke produced. To prevent ignition and combustion of these solids, the waste tanks have been equipped with a nitrogen inerting system

  18. Guidance and considerations for the implementation of INFCIRC/225/Rev.4, the physical protection of nuclear material and nuclear facilities

    International Nuclear Information System (INIS)

    2000-05-01

    This publication is intended to provide guidance and considerations for a State's competent authority to better understand and prescribe appropriate requirements, consistent with INFCIRC/225/Rev.4 for the protection of nuclear material and nuclear facilities which are compatible with accepted international practice. This report, together with a more detailed report, Handbook on the Physical Protection of Nuclear Material and Facilities, which addresses to the licencee or designer of physical protection systems who has specific implementation and compliance responsibilities, should be used in conjunction to each other to provide better and comprehensive guidance on physical protection

  19. Evolution of ASTEC V1.2 rev.1 code for WWER-1000 reactors/SBO sequence

    International Nuclear Information System (INIS)

    Georgieva, J.; Stefanova, A.; Groudev, P.; Tusheva, P.; Kalchev, B.; Passalacqua, R.

    2006-01-01

    In this paper a comparison between calculations of severe accidents occurred from WWER-1000 with ASTEC code specified for an event of full unloading with relief valves stuck opened with no hydroaccumulators intervention is presented. The purpose of the analyses provided is to present the relationship between the improvements of the actual version (ASTEC Vl.2 rev. 1) and ASTEC V1.1 p2 like: code modifications, incoming data improvements. Such discrepancies are to be examined. Case by case suggestions for ASTEC improvements are to be provided

  20. Elsam. Offshore Wind Farm. Horns Rev. Annual status report for the environmental monitoring programme 1. January 2001 - 31. December 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-15

    As a result of the Danish Government's Energy Plan 21 a target of 5,500 MW wind power is to be erected in Denmark by 2030. 4,000 MW of these are to be placed offshore in special pointed areas with minimal impacts on the environment. In 1998 the Danish Ministry of Environment and Energy ordered two power companies, Elsam and Energi E2, to establish each a demonstration wind farm at one of the five pointed areas. The intention was to follow the environmental impacts from the wind farm and to evaluate the possibility of setting up about 1,500 MW in each area with as little impact on the environment as possible. In 1999 the two power companies were given approval to begin pre-studies of each of the two wind farms and the work on the site construction as well as the environmental impact assessment related hereto was initiated. The authorities made a number of requirements for the EIA surveys according to the EU-directive for preparation of EIA reports. In the summer of 2000 the EIA report with project description was submitted to the authorities and the project was approved in the spring of 2001. During the summer and autumn of 2001 orders were placed for the components for the wind farm, i.e. foundations, towers, wind turbines, cables etc. After having finalised the EIA, monitoring programmes of the wind farms were initiated on basis of the results of the surveys carried out during the EIA. This means that continuous surveys have been implemented for most of the environmental parameters from 1999 and till today. This annual status report for 2001 is to present the results from the annual environmental monitoring programme (the baseline studies) at Horns Rev, which form part of the monitoring programme set up for the Horns Rev project. To get a complete picture of the Danish monitoring programme for the national demonstration wind farm project it is necessary to see the report for Horns Rev and for Roedsand as a whole. The report comprises a description of the wind

  1. Elsam. Offshore Wind Farm. Horns Rev. Annual status report for the environmental monitoring programme 1. January 2001 - 31. December 2001

    International Nuclear Information System (INIS)

    2002-10-01

    As a result of the Danish Government's Energy Plan 21 a target of 5,500 MW wind power is to be erected in Denmark by 2030. 4,000 MW of these are to be placed offshore in special pointed areas with minimal impacts on the environment. In 1998 the Danish Ministry of Environment and Energy ordered two power companies, Elsam and Energi E2, to establish each a demonstration wind farm at one of the five pointed areas. The intention was to follow the environmental impacts from the wind farm and to evaluate the possibility of setting up about 1,500 MW in each area with as little impact on the environment as possible. In 1999 the two power companies were given approval to begin pre-studies of each of the two wind farms and the work on the site construction as well as the environmental impact assessment related hereto was initiated. The authorities made a number of requirements for the EIA surveys according to the EU-directive for preparation of EIA reports. In the summer of 2000 the EIA report with project description was submitted to the authorities and the project was approved in the spring of 2001. During the summer and autumn of 2001 orders were placed for the components for the wind farm, i.e. foundations, towers, wind turbines, cables etc. After having finalised the EIA, monitoring programmes of the wind farms were initiated on basis of the results of the surveys carried out during the EIA. This means that continuous surveys have been implemented for most of the environmental parameters from 1999 and till today. This annual status report for 2001 is to present the results from the annual environmental monitoring programme (the baseline studies) at Horns Rev, which form part of the monitoring programme set up for the Horns Rev project. To get a complete picture of the Danish monitoring programme for the national demonstration wind farm project it is necessary to see the report for Horns Rev and for Roedsand as a whole. The report comprises a description of the wind farm

  2. Guidance and considerations for the implementation of INFCIRC/225/Rev.4, the physical protection of nuclear material and nuclear facilities

    International Nuclear Information System (INIS)

    2002-05-01

    This publication is intended to provide guidance and considerations for a State's competent authority to better understand and prescribe appropriate requirements, consistent with INFCIRC/225/Rev.4 for the protection of nuclear material and nuclear facilities which are compatible with accepted international practice. This report, together with a more detailed report, Handbook on the Physical Protection of Nuclear Material and Facilities, which addresses to the licensee or designer of physical protection systems who has specific implementation and compliance responsibilities, should be used in conjunction to each other to provide better and comprehensive guidance on physical protection

  3. History of Solid Rockets

    Science.gov (United States)

    Green, Rebecca

    2017-01-01

    Solid rockets are of interest to the space program because they are commonly used as boosters that provide the additional thrust needed for the space launch vehicle to escape the gravitational pull of the Earth. Larger, more advanced solid rockets allow for space launch vehicles with larger payload capacities, enabling mankind to reach new depths of space. This presentation will discuss, in detail, the history of solid rockets. The history begins with the invention and origin of the solid rocket, and then goes into the early uses and design of the solid rocket. The evolution of solid rockets is depicted by a description of how solid rockets changed and improved and how they were used throughout the 16th, 17th, 18th, and 19th centuries. Modern uses of the solid rocket include the Solid Rocket Boosters (SRBs) on the Space Shuttle and the solid rockets used on current space launch vehicles. The functions and design of the SRB and the advancements in solid rocket technology since the use of the SRB are discussed as well. Common failure modes and design difficulties are discussed as well.

  4. Solid Base Catalysis

    CERN Document Server

    Ono, Yoshio

    2011-01-01

    The importance of solid base catalysts has come to be recognized for their environmentally benign qualities, and much significant progress has been made over the past two decades in catalytic materials and solid base-catalyzed reactions. The book is focused on the solid base. Because of the advantages over liquid bases, the use of solid base catalysts in organic synthesis is expanding. Solid bases are easier to dispose than liquid bases, separation and recovery of products, catalysts and solvents are less difficult, and they are non-corrosive. Furthermore, base-catalyzed reactions can be performed without using solvents and even in the gas phase, opening up more possibilities for discovering novel reaction systems. Using numerous examples, the present volume describes the remarkable role solid base catalysis can play, given the ever increasing worldwide importance of "green" chemistry. The reader will obtain an overall view of solid base catalysis and gain insight into the versatility of the reactions to whic...

  5. Electric power supply with solar cells. 2. rev. and enlarged ed.

    International Nuclear Information System (INIS)

    Koethe, H.K.

    1991-01-01

    In connection with the development of photovoltaic systems the engineer has to try to keep costs as low as possible while maintaining safety standard. This is easily said, but done it can be only with solid know-how. The know-how is to be conveyed by this book. The author has long-term specialized experience ranging from the energy source ''solar radiation'' up to applicable photovoltaic systems. It is demonstrated how the properties of solar cells, storage devices, and electronic components have to be already considered in systems design optimization, and which possibilities the engineer has in subsequently constructing the system. The components needed are described in detail, and information is presented for their selection and application. A number of established systems conclude the contribution. (orig./ORU) With 260 figs., 34 tabs [de

  6. Fulltext PDF

    Indian Academy of Sciences (India)

    [18] D Rychtarik, B Engeser, H-C Nägerl and R Grimm, Phys. Rev. Lett. 92, 173003. (2004). [19] S Stock, Z Hadzibabic, B Battelier, M Cheneau and J Dalibard, Phys. Rev. Lett. 95,. 190403 (2005). [20] G Hechenblaikner, J M Krueger and C J Foot, Phys. Rev. A71, 013604 (2005). [21] M Schick, Phys. Rev. A3, 1067 (1971).

  7. Comment on "Comments on `The Euclidean gravitational action as black hole entropy, singularities and space-time voids'" [J. Math. Phys. 50, 042502 (2009)]-Schwarzschild black hole lives to fight another day

    Science.gov (United States)

    Kundu, Prasun K.

    2017-11-01

    In a comment published several years ago in this journal, Mitra [J. Math. Phys. 50, 042502 (2009)] has claimed to prove that a neutral point particle in general relativity as described by the Schwarzschild metric must have zero gravitational mass, i.e., the mass parameter M0 of a Schwarzschild black hole necessarily vanishes. It is shown that the purported proof is incorrect. The error stems from a basic misunderstanding of the mathematical description of coordinate volume element in a differentiable manifold.

  8. Binding mode prediction and MD/MMPBSA-based free energy ranking for agonists of REV-ERBα/NCoR.

    Science.gov (United States)

    Westermaier, Yvonne; Ruiz-Carmona, Sergio; Theret, Isabelle; Perron-Sierra, Françoise; Poissonnet, Guillaume; Dacquet, Catherine; Boutin, Jean A; Ducrot, Pierre; Barril, Xavier

    2017-08-01

    The knowledge of the free energy of binding of small molecules to a macromolecular target is crucial in drug design as is the ability to predict the functional consequences of binding. We highlight how a molecular dynamics (MD)-based approach can be used to predict the free energy of small molecules, and to provide priorities for the synthesis and the validation via in vitro tests. Here, we study the dynamics and energetics of the nuclear receptor REV-ERBα with its co-repressor NCoR and 35 novel agonists. Our in silico approach combines molecular docking, molecular dynamics (MD), solvent-accessible surface area (SASA) and molecular mechanics poisson boltzmann surface area (MMPBSA) calculations. While docking yielded initial hints on the binding modes, their stability was assessed by MD. The SASA calculations revealed that the presence of the ligand led to a higher exposure of hydrophobic REV-ERB residues for NCoR recruitment. MMPBSA was very successful in ranking ligands by potency in a retrospective and prospective manner. Particularly, the prospective MMPBSA ranking-based validations for four compounds, three predicted to be active and one weakly active, were confirmed experimentally.

  9. REMINDER: Compliance with Operational Circular No. 2 (Rev. 1) on “Conditions of access to the fenced CERN site”

    CERN Multimedia

    2012-01-01

    The purpose of Operational Circular No. 2 (Rev. 1) is to contribute to the protection of people and property by defining the conditions of access to the Organization's fenced sites. The behaviours that cannot be tolerated under any circumstances are: use of CERN access cards by people, other than the cardholders themselves, in order to gain access to facilities without having attended the required safety course; speeding, particularly on Route Gregory and Route Weisskopf; driving in and out of the site on the wrong side of the road; parking on spaces set aside for the disabled; nuisance parking, especially in the proximity of the restaurants; dumping of wrecked vehicles. As the aforementioned instances of non-compliance can lead to dangerous situations, the Organization reserves the right to apply the penalties provided for under paragraph 26 of Operational Circular No. 2 (Rev. 1), namely to refuse access to the site to people and/or their vehicles deemed to be in infringement of the circu...

  10. A numerical-statistical approach to determining the representative elementary volume (REV of cement paste for measuring diffusivity

    Directory of Open Access Journals (Sweden)

    Zhang, M. Z.

    2010-12-01

    Full Text Available Concrete diffusivity is a function of its microstructure on many scales, ranging from nanometres to millimetres. Multi-scale techniques are therefore needed to model this parameter. Representative elementary volume (REV, in conjunction with the homogenization principle, is one of the most common multi-scale approaches. This study aimed to establish a procedure for establishing the REV required to determine cement paste diffusivity based on a three-step, numerical-statistical approach. First, several series of 3D cement paste microstructures were generated with HYMOSTRUC3D, a cement hydration and microstructure model, for different volumes of cement paste and w/c ratios ranging from 0.30 to 0.60. Second, the finite element method was used to simulate the diffusion of tritiated water through these microstructures. Effective cement paste diffusivity values for different REVs were obtained by applying Fick’s law. Finally, statistical analysis was used to find the fluctuation in effective diffusivity with cement paste volume, from which the REV was then determined. The conclusion drawn was that the REV for measuring diffusivity in cement paste is 100x100x100 μm3.

    La difusividad del hormigón depende de su microestructura a numerosas escalas, desde nanómetros hasta milímetros, por lo que se precisa de técnicas multiescala para representar este parámetro. Junto con el principio de homogeneización, uno de los métodos multiescala más habituales es el volumen elemental representativo (VER. El objeto de este estudio era establecer un procedimiento que permitiera determinar el VER necesario para calcular la difusividad de la pasta de cemento, basándose en un método numéricoestadístico que consta de tres etapas. Primero, se crearon varias series de microestructuras de pasta de cemento en 3D con HYMOSTRUC3D, un programa que permite crear un modelo de la hidratación y microestructura del cemento. Luego se empleó el método de

  11. Solid state video cameras

    CERN Document Server

    Cristol, Y

    2013-01-01

    Solid State Video Cameras reviews the state of the art in the field of solid-state television cameras as compiled from patent literature. Organized into 10 chapters, the book begins with the basic array types of solid-state imagers and appropriate read-out circuits and methods. Documents relating to improvement of picture quality, such as spurious signal suppression, uniformity correction, or resolution enhancement, are also cited. The last part considerssolid-state color cameras.

  12. Nanoscale hydrodynamics near solids

    Science.gov (United States)

    Camargo, Diego; de la Torre, J. A.; Duque-Zumajo, D.; Español, Pep; Delgado-Buscalioni, Rafael; Chejne, Farid

    2018-02-01

    Density Functional Theory (DFT) is a successful and well-established theory for the study of the structure of simple and complex fluids at equilibrium. The theory has been generalized to dynamical situations when the underlying dynamics is diffusive as in, for example, colloidal systems. However, there is no such a clear foundation for Dynamic DFT (DDFT) for the case of simple fluids in contact with solid walls. In this work, we derive DDFT for simple fluids by including not only the mass density field but also the momentum density field of the fluid. The standard projection operator method based on the Kawasaki-Gunton operator is used for deriving the equations for the average value of these fields. The solid is described as featureless under the assumption that all the internal degrees of freedom of the solid relax much faster than those of the fluid (solid elasticity is irrelevant). The fluid moves according to a set of non-local hydrodynamic equations that include explicitly the forces due to the solid. These forces are of two types, reversible forces emerging from the free energy density functional, and accounting for impenetrability of the solid, and irreversible forces that involve the velocity of both the fluid and the solid. These forces are localized in the vicinity of the solid surface. The resulting hydrodynamic equations should allow one to study dynamical regimes of simple fluids in contact with solid objects in isothermal situations.

  13. Utilisation of solid waste

    Energy Technology Data Exchange (ETDEWEB)

    Balu, K

    1978-07-01

    The prime solution to the present energy crisis is the recovery of latent energy from waste materials, for solid waste contains recoverable energy and it merely needs to be released. The paper is concerned with classification of solid waste, energy content of waste, methods of solid waste disposal, and chemical processing of solid waste. Waste disposal must be performed in situ with energy recovery. Scarcity of available land, pollution problem, and unrecovered latent energy restrict the use of the land-filling method. Pyrolysis is an effective method for the energy recovery and disposal problems. Chemical processing is suitable for the separated cellulosic fraction of the waste material.

  14. Multivalent ion conducting solids

    Energy Technology Data Exchange (ETDEWEB)

    Imanaka, N. [Osaka Univ., Suita, Osaka (Japan). Dept. of Applied Chemistry

    2008-07-01

    Solid electrolytes possess important characteristics for industrial applications. Only a single ionic species can macroscopically migrate in these solids. This paper described a the new NASICON (M-Zr-Nb-P-O) type system, exhibiting an exceptionally high level of trivalent M3+ ion conductivity on polycrystalline solids. The partial substitution of the smaller higher valent Nb5+ ion for Zr4+ stabilized the NASICON phase and realized the M3+ ion conduction in the NASICON structure. It was concluded that the conductivities of the series are comparable to those of the practically applied solid electrolytes of oxide anion conductors of YSZ and CSZ. 3 refs., 2 figs.

  15. Management of solid waste

    Science.gov (United States)

    Thompson, W. T.; Stinton, L. H.

    1980-04-01

    Compliance with the latest regulatory requirements addressing disposal of radioactive, hazardous, and sanitary solid waste criteria in the selection, design, and operation of solid waste management facilities. Due to the state of flux of these regulatory requirements from EPA and NRC, several waste management options were of solid waste. The current regulatory constraints and the design and operational requirements for construction of both storage and disposal facilities for use in management of DOE-ORO solid waste are highlighted. Capital operational costs are included for both disposal and storage options.

  16. Management of solid waste

    International Nuclear Information System (INIS)

    Thompson, W.T.; Stinton, L.H.

    1980-01-01

    Compliance with the latest regulatory requirements addressing disposal of radioactive, hazardous, and sanitary solid waste requires the application of numerous qualitative and quantitative criteria in the selection, design, and operation of solid waste management facilities. Due to the state of flux of these regulatory requirements from EPA and NRC several waste management options were identified as being applicable to the management of the various types of solid waste. This paper highlights the current regulatory constraints and the design and operational requirements for construction of both storage and disposal facilities for use in management of DOE-ORO solid waste. Capital and operational costs are included for both disposal and storage options

  17. Management of solid waste

    International Nuclear Information System (INIS)

    Thompson, W.T.; Stinton, L.H.

    1980-01-01

    Compliance with the latest regulatory requirements addressing disposal of radioactive, hazardous, and sanitary solid waste requires the application of numerous qualitative and quantitative criteria in the selection, design, and operation of solid waste management facilities. Due to the state of flux of these regulatory requirements from EPA and NRC, several waste management options were identified as being applicable to the management of the various types of solid waste. This paper highlights the current regulatory constraints and the design and operational requirements for construction of both storage and disposal facilities for use in management of DOE-ORO solid waste. Capital and operational costs are included for both disposal and storage options

  18. Understanding solid state physics

    CERN Document Server

    Holgate, Sharon Ann

    2009-01-01

    Where Sharon Ann Holgate has succeeded in this book is in packing it with examples of the application of solid state physics to technology. … All the basic elements of solid state physics are covered … . The range of materials is good, including as it does polymers and glasses as well as crystalline solids. In general, the style makes for easy reading. … Overall this book succeeds in showing the relevance of solid state physics to the modern world … .-Contemporary Physics, Vol. 52, No. 2, 2011I was indeed amused and inspired by the wonderful images throughout the book, carefully selected by th

  19. Management of solid wastes

    Energy Technology Data Exchange (ETDEWEB)

    Williams, D.J. [University of Queensland, St. Lucia, Qld. (Australia). Dept. of Civil Engineering

    1996-12-31

    This chapter introduces the range of solid waste materials produced in the mining and mineral processing industries, with particular reference to Australia. The waste materials are characterised and their important geotechnical engineering properties are discussed. Disposal management techniques for metalliferous, coal, heavy mineral sand, fly ash and bauxite solid wastes are described. Geo-technical techniques for the management of potential contaminants are presented. Minimisation and utilisation of solid wastes, and the economics of solid waste management, are discussed from the perspectives of policy, planning, costing and rehabilitation. 19 figs., 2 tabs.

  20. Optimization of a Solid-State Electron Spin Qubit Using Gate Set Tomography (Open Access, Publisher’s Version)

    Science.gov (United States)

    2016-10-13

    and addressedwhen the qubit is usedwithin a fault-tolerant quantum computation scheme. 1. Introduction One of themain challenges in the physical...supplied in the supplementarymaterial. Additionally, we have supplied the datafiles constructed from the experiments, alongwith the Python notebook used to...New J. Phys. 18 (2016) 103018 doi:10.1088/1367-2630/18/10/103018 PAPER Optimization of a solid-state electron spin qubit using gate set tomography

  1. The HIV-1 Rev/RRE system is required for HIV-1 5' UTR cis elements to augment encapsidation of heterologous RNA into HIV-1 viral particles

    Directory of Open Access Journals (Sweden)

    Ma Hong

    2011-06-01

    Full Text Available Abstract Background The process of HIV-1 genomic RNA (gRNA encapsidation is governed by a number of viral encoded components, most notably the Gag protein and gRNA cis elements in the canonical packaging signal (ψ. Also implicated in encapsidation are cis determinants in the R, U5, and PBS (primer binding site from the 5' untranslated region (UTR. Although conventionally associated with nuclear export of HIV-1 RNA, there is a burgeoning role for the Rev/RRE in the encapsidation process. Pleiotropic effects exhibited by these cis and trans viral components may confound the ability to examine their independent, and combined, impact on encapsidation of RNA into HIV-1 viral particles in their innate viral context. We systematically reconstructed the HIV-1 packaging system in the context of a heterologous murine leukemia virus (MLV vector RNA to elucidate a mechanism in which the Rev/RRE system is central to achieving efficient and specific encapsidation into HIV-1 viral particles. Results We show for the first time that the Rev/RRE system can augment RNA encapsidation independent of all cis elements from the 5' UTR (R, U5, PBS, and ψ. Incorporation of all the 5' UTR cis elements did not enhance RNA encapsidation in the absence of the Rev/RRE system. In fact, we demonstrate that the Rev/RRE system is required for specific and efficient encapsidation commonly associated with the canonical packaging signal. The mechanism of Rev/RRE-mediated encapsidation is not a general phenomenon, since the combination of the Rev/RRE system and 5' UTR cis elements did not enhance encapsidation into MLV-derived viral particles. Lastly, we show that heterologous MLV RNAs conform to transduction properties commonly associated with HIV-1 viral particles, including in vivo transduction of non-dividing cells (i.e. mouse neurons; however, the cDNA forms are episomes predominantly in the 1-LTR circle form. Conclusions Premised on encapsidation of a heterologous RNA into

  2. Hydroacoustic registration of fish abundance of offshore wind farms. Horns Rev offshore wind farm. Annual report 2004.

    Energy Technology Data Exchange (ETDEWEB)

    Hvidt, C.B.; Bruenner, L.; Reier Knudsen, F.

    2005-05-15

    Elsam Engineering AS has approved the implementation of a project concerning the registration of fish communities in Horns Rev Offshore Wind Farm with use of hydroacoustic methods. In a joint effort, Bio/consult as, Carl Bro as and SIMRAD AS have monitored the fish communities at Horns Rev Offshore Wind Farm using a new hydroacoustic methodology. The new hydroacoustic technique combines the use of scientific sonar acoustics with GPS to determine the density, diversity and location of fish. The objectives of this project were to test the possibility of using hydroacoustic techniques as alternative methods to traditional techniques to assess the fish assemblage inhabiting offshore wind farms and to investigate the possible effect from the wind farm and hard bottom substrates (turbine foundations) on fish abundance. The field study was carried out October 9-10, 2004 and consisted of four horizontal hydroacoustic survey transects each covering impact and reference areas. Transects were surveyed in order to achieve identical impact and reference transect pairs concerning environment, topography and time correspondence. The hydroacoustic equipment consisted of a SIMRAD EK60/EY60 echo sounder with a split-beam transducer (Simrad ES 120-4x10) mounted on a pan and tilt unit, a transceiver, a laptop extended with a GPS-receiver and additional large external hard discs. The raw data files from EK60 were converted to echogram files suitable for the post processing application, Sonar5-Pro. The Sonar5-Pro software makes it possible to filter out echo detections from the surface and the bottom, as well as perform cross filter detection. The validity of the results using the hydroacoustic method is high due to the cross filtering and single target tracking technique. From the hydroacoustic results, no or very little effect from the wind farm or from hard bottom substrates was found on the fish densities at Horns Rev Wind Farm at the time of the survey. The execution of the field

  3. Universal decoherence in solids.

    Science.gov (United States)

    Chudnovsky, Eugene M

    2004-03-26

    Symmetry implications for the decoherence of quantum oscillations of a two-state system in a solid are studied. When the oscillation frequency is small compared to the Debye frequency, the universal lower bound on the decoherence due to the atomic environment is derived in terms of the macroscopic parameters of the solid, with no unknown interaction constants.

  4. Ceramic solid electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Goodenough, John B. [Center for Materials Science and Engineering, University of Texas at Austin, Austin, TX (United States)

    1997-02-15

    Strategies for the design of ceramic solid electrolytes are reviewed. Problems associated with stoichiometric and doped compounds are compared. In the illustration of design principles, emphasis is given to oxide-ion electrolytes for use in solid-oxide fuel cells, oxygen pumps, and oxygen sensors

  5. Applied mechanics of solids

    CERN Document Server

    Bower, Allan F

    2009-01-01

    Modern computer simulations make stress analysis easy. As they continue to replace classical mathematical methods of analysis, these software programs require users to have a solid understanding of the fundamental principles on which they are based. Develop Intuitive Ability to Identify and Avoid Physically Meaningless Predictions Applied Mechanics of Solids is a powerful tool for understanding how to take advantage of these revolutionary computer advances in the field of solid mechanics. Beginning with a description of the physical and mathematical laws that govern deformation in solids, the text presents modern constitutive equations, as well as analytical and computational methods of stress analysis and fracture mechanics. It also addresses the nonlinear theory of deformable rods, membranes, plates, and shells, and solutions to important boundary and initial value problems in solid mechanics. The author uses the step-by-step manner of a blackboard lecture to explain problem solving methods, often providing...

  6. LLNL Radiation Protection Program (RPP) Rev 9.2, Implementation of 10 CFR 835, 'Occupational Radiation Protection'

    Energy Technology Data Exchange (ETDEWEB)

    Shingleton, K. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2011-06-15

    The Department of Energy (DOE) originally issued Part 10 CFR 835, Occupational Radiation Protection, on January 1, 1994. This regulation, hereafter referred to as “the Rule”, required DOE contractors to develop and maintain a DOE-approved Radiation Protection Program (RPP); DOE approved the initial Lawrence Livermore National Laboratory (LLNL) RPP (Rev 2) on 6/29/95. DOE issued a revision to the Rule on December 4, 1998 and approved LLNL’s revised RPP (Rev 7.1) on 11/18/99. DOE issued a second Rule revision on June 8, 2007 (effective July 9, 2007) and on June 13, 2008 approved LLNL’s RPP (Rev 9.0) which contained plans and measures for coming into compliance with the 2007 Rule changes. DOE issued a correction to the Rule on April 21, 2009.

  7. Estimation of turbulence intensity using rotor effective wind speed in Lillgrund and Horns Rev-I offshore wind farms

    DEFF Research Database (Denmark)

    Gögmen, Tuhfe; Giebel, Gregor

    2016-01-01

    varies over the extent of the wind farm. This paper describes a method to estimate the TI at individual turbine locations by using the rotor effective wind speed calculated via high frequency turbine data. The method is applied to Lillgrund and Horns Rev-I offshore wind farms and the results are compared...... with TI derived from the meteorological mast, nacelle mounted anemometer on the turbines and estimation based on the standard deviation of power. The results show that the proposed TI estimation method is in the best agreement with the meteorological mast. Therefore, the rotor effective wind speed...... is shown to be applicable for the TI assessment in real-time wind farm calculations under different operational conditions. Furthermore, the TI in the wake is seen to follow the same trend with the estimated wake deficit which enables to quantify the turbulence in terms of the wake loss locally inside...

  8. Elsam. Offshore Wind Turbines. Horns Rev. Annual status report for the environmental monitoring programme 1. January 2004 - 31. December 2004

    International Nuclear Information System (INIS)

    2005-07-01

    In 2001, the former Ministry of the Environment and Energy granted Elsam A/S and Eltra A.m.b.A. approval to establish a wind farm capable of producing 160 MW of electric power, at Horns Rev, west of Blaevandshuk at the west coast of Jutland. According to the conditions of the approval, Elsam and Eltra were required to monitor the environmental effects of the wind farm by performing monitoring before, during and after construction of the wind farm. The environmental monitoring programme is financed through Public Service Obligation (PSO). Analogue to the Horns Rev wind farm another offshore demonstrational wind farm was established in the Baltic sea south of Lolland by Energi E2 the Nysted 165 MW offshore wind farm. To coordinate the environmental monitoring at the two demonstration wind farms at Nysted and Horns Rev within the framework of the approved budget, the Environmental Group of Danish Offshore Wind Farm Demonstration Projects was set up. The group consists of representatives from the Danish Forest and Nature Agency, the Danish Energy Authority, Elsam and Energi E2. The Environmental Group initiates, monitors and evaluates the environmental programmes continuously with respect to possible improvements and intensifications to ensure that the design of the individual programmes is optimal. After evaluation, the monitoring programmes are proposed by the Environmental Group and carried out after final approval by the Danish Energy Authority. The Environmental Group considers if there is reason to adjust the issues and priorities of the programmes based on previous experience or other inputs eg from the international expert panel, IAPEME (International Advisory Panel of Experts on Marine Ecology). IAPEME evaluates the environmental monitoring programmes and makes valuable suggestions and recommendations to the Environmental Group. The programmes have concentrated on the monitoring of possible impacts before, during and after construction to investigate and

  9. Amchitka Mud Pit Sites 2006 Post-Closure Monitoring and Inspection Report, Amchitka Island, Alaska, Rev. No.: 0

    Energy Technology Data Exchange (ETDEWEB)

    Matthews, Patrick

    2006-09-01

    In 2001, the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA/NSO) remediated six areas associated with Amchitka mud pit release sites located on Amchitka Island, Alaska. This included the construction of seven closure caps. To ensure the integrity and effectiveness of remedial action, the mud pit sites are to be inspected every five years as part of DOE's long-term monitoring and surveillance program. In August of 2006, the closure caps were inspected in accordance with the ''Post-Closure Monitoring and Inspection Plan for Amchitka Island Mud Pit Release Sites'' (Rev. 0, November 2005). This post-closure monitoring report provides the 2006 cap inspection results.

  10. Elsam. Offshore Wind Turbines. Horns Rev. Annual status report for the environmental monitoring programme 1. January 2004 - 31. December 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-15

    In 2001, the former Ministry of the Environment and Energy granted Elsam A/S and Eltra A.m.b.A. approval to establish a wind farm capable of producing 160 MW of electric power, at Horns Rev, west of Blaevandshuk at the west coast of Jutland. According to the conditions of the approval, Elsam and Eltra were required to monitor the environmental effects of the wind farm by performing monitoring before, during and after construction of the wind farm. The environmental monitoring programme is financed through Public Service Obligation (PSO). Analogue to the Horns Rev wind farm another offshore demonstrational wind farm was established in the Baltic sea south of Lolland by Energi E2 the Nysted 165 MW offshore wind farm. To coordinate the environmental monitoring at the two demonstration wind farms at Nysted and Horns Rev within the framework of the approved budget, the Environmental Group of Danish Offshore Wind Farm Demonstration Projects was set up. The group consists of representatives from the Danish Forest and Nature Agency, the Danish Energy Authority, Elsam and Energi E2. The Environmental Group initiates, monitors and evaluates the environmental programmes continuously with respect to possible improvements and intensifications to ensure that the design of the individual programmes is optimal. After evaluation, the monitoring programmes are proposed by the Environmental Group and carried out after final approval by the Danish Energy Authority. The Environmental Group considers if there is reason to adjust the issues and priorities of the programmes based on previous experience or other inputs eg from the international expert panel, IAPEME (International Advisory Panel of Experts on Marine Ecology). IAPEME evaluates the environmental monitoring programmes and makes valuable suggestions and recommendations to the Environmental Group. The programmes have concentrated on the monitoring of possible impacts before, during and after construction to investigate and

  11. Comments on 'On the estimation of overwater bowen ratio from sea-air temperature difference. Reply to: Hsu, S.A. - A relationship between the Bowen ratio and sea-air temperature difference under unstable conditions at sea. J. Phys. Oceanogr. Vol. 28; p. 2222-2226'

    Digital Repository Service at National Institute of Oceanography (India)

    Sadhuram, Y.; Murty, T.V.R.; Sarma, Y.V.B.; Murty, V.S.N.

    stream_size 2 stream_content_type text/plain stream_name J_Phys_Oceanogr_31_1933.pdf.txt stream_source_info J_Phys_Oceanogr_31_1933.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

  12. Simulant Basis for the Standard High Solids Vessel Design

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Reid A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fiskum, Sandra K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Suffield, Sarah R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Daniel, Richard C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gauglitz, Phillip A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wells, Beric E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-09-30

    The Waste Treatment and Immobilization Plant (WTP) is working to develop a Standard High Solids Vessel Design (SHSVD) process vessel. To support testing of this new design, WTP engineering staff requested that a Newtonian simulant and a non-Newtonian simulant be developed that would represent the Most Adverse Design Conditions (in development) with respect to mixing performance as specified by WTP. The majority of the simulant requirements are specified in 24590-PTF-RPT-PE-16-001, Rev. 0. The first step in this process is to develop the basis for these simulants. This document describes the basis for the properties of these two simulant types. The simulant recipes that meet this basis will be provided in a subsequent document.

  13. Output calibration in solid water for high energy photon beams

    International Nuclear Information System (INIS)

    Reft, C.S.

    1989-01-01

    The AAPM Protocol recommends the use of water, polystyrene or acrylic media for measuring the output of high energy photon beams. It provides the appropriate restricted mass stopping powers and mass energy absorption coefficients for converting the dose to these media to dose to water. A water-equivalent solid has been developed for dosimetric applications. [C. Constantinou, F. Attix, and B. Paliwal, Med. Phys. 9, 436 (1982)]. Calculated values for the restricted mass stopping powers and mass energy absorption coefficients have been published for this material. [A. Ho and B. Paliwal, Med. Phys. 13, 403 (1986)]. The accuracy of these calculations was investigated by making output measurements, following the Protocol, with a Farmer type chamber in four materials for Co-60, 4, 6, 10, 18, and 24 MV photon beams. The results show that the scaled dose to water for the different media agree to better than 1%, and the analysis supports the methodology of the Protocol for obtaining the dose to water from the different media

  14. Solid Lithium Ion Conductors (SLIC) for Lithium Solid State Batteries

    Data.gov (United States)

    National Aeronautics and Space Administration — To identify the most lithium-ion conducting solid electrolytes for lithium solid state batteries from the emerging types of solid electrolytes, based on a...

  15. Visual and radar observations of birds in relation to collision risk at the Horns Rev offshore wind farm. Annual status report 2003

    Energy Technology Data Exchange (ETDEWEB)

    Kjaer Christensen, T.; Hounisen, J.P.; Clausager, I.; Krag Petersen, I.

    2004-07-01

    The aim of the project is to assess the collision risk between birds and wind turbines at the Horns Rev wind farm. In 2003 the studies focused on describing bird movements in relation to the wind farm and to identify the species-specific behavioural responses towards the wind turbines shown by migrating and staging species. The Horns Rev area lies in a region known to be important for substantial water bird migration as well as holding internationally important numbers of several wintering and staging water bird species. (au)

  16. OECD MCCI project Melt Eruption Test (MET) design report, Rev. 2. April 15, 2003

    International Nuclear Information System (INIS)

    Farmer, M.T.; Lomperski, S.; Kilsdonk, D.J.; Aeschlimann, R.W.; Basu, S.

    2011-01-01

    The Melt Attack and Coolability Experiments (MACE) program at Argonne National Laboratory addressed the issue of the ability of water to cool and thermally stabilize a molten core-concrete interaction when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. The Melt Coolability and Concrete Interaction (MCCI) program is pursuing separate effect tests to examine the viability of the melt coolability mechanisms identified as part of the MACE program. These mechanisms include bulk cooling, water ingression, volcanic eruptions, and crust breach. At the second PRG meeting held at ANL on 22-23 October 2002, a preliminary design1 for a separate effects test to investigate the melt eruption cooling mechanism was presented for PRG review. At this meeting, NUPEC made several recommendations on the experiment approach aimed at optimizing the chances of achieving a floating crust boundary condition in this test. The principal recommendation was to incorporate a mortar sidewall liner into the test design, since data from the COTELS experiment program indicates that corium does not form a strong mechanical bond with this material. Other recommendations included: (i) reduction of the electrode elevation to well below the melt upper surface elevation (since the crust may bond to these solid surfaces), and (ii) favorably taper the mortar liner to facilitate crust detachment and relocation during the experiment. Finally, as a precursor to implementing these modifications, the PRG recommended the development of a design for a small-scale scoping test intended to verify the ability of the mortar liner to preclude formation of an anchored bridge crust under core-concrete interaction conditions. This revised Melt Eruption Test (MET) plan is intended to

  17. Solid biomass barometer

    International Nuclear Information System (INIS)

    Anon.

    2007-01-01

    Primary energy production from solid biomass (wood, wood waste and other solid vegetal and animal materials) reached 62,4 million tons oil equivalent (Mtoe) in 2006, i-e 3,1 more than in 2005. The primary energy coming from the direct combustion of renewable origin solid urban waste in incineration unit scan also be added to this figure. In 2006 this represented a production of 5,3 Mtoe, i-e 0,1 Mtoe more than in 2005. (author)

  18. Applications in solid mechanics

    DEFF Research Database (Denmark)

    Ølgaard, Kristian Breum; Wells, Garth N.

    2012-01-01

    Problems in solid mechanics constitute perhaps the largest field of application of finite element methods. The vast majority of solid mechanics problems involve the standard momentum balance equation, posed in a Lagrangian setting, with different models distinguished by the choice of nonlinear...... or linearized kinematics, and the constitutive model for determining the stress. For some common models, the constitutive relationships are rather complex. This chapter addresses a number of canonical solid mechanics models in the context of automated modeling, and focuses on some pertinent issues that arise...

  19. The solid state maser

    CERN Document Server

    Orton, J W; Walling, J C; Ter Haar, D

    1970-01-01

    The Solid State Maser presents readings related to solid state maser amplifier from the first tentative theoretical proposals that appeared in the early 1950s to the successful realization of practical devices and their application to satellite communications and radio astronomy almost exactly 10 years later. The book discusses a historical account of the early developments (including that of the ammonia maser) of solid state maser; the properties of paramagnetic ions in crystals; the development of practical low noise amplifiers; and the characteristics of maser devices designed for communica

  20. Invariance of the solid-liquid interfacial energy in electrowetting probed via capillary condensation.

    Science.gov (United States)

    Gupta, Rohini; Olivier, Gloria K; Frechette, Joelle

    2010-07-20

    Capillary condensation is employed to probe the solid-liquid interfacial energy in electrowetting on dielectric. The height of an annular water meniscus formed via capillary condensation inside the surface force apparatus is measured as a function of the potential applied across the meniscus and the dielectric stack where the meniscus is formed. According to the Kelvin equation, a decrease in the solid-liquid interfacial energy at constant temperature and relative humidity should lead to an increase in the meniscus height. Our experimental results on nanometer-sized meniscus are in agreement with the work of Mugele [J. Phys.: Condens. Matter 2007, 19, 375112] and unequivocally demonstrate that the real contact angle (or the solid-liquid interfacial energy) remains unaltered in electrowetting on dielectric.

  1. Layered inorganic solids

    Czech Academy of Sciences Publication Activity Database

    Čejka, Jiří; Morris, R. E.; Nachtigall, P.; Roth, Wieslaw Jerzy

    2014-01-01

    Roč. 43, č. 27 (2014), s. 10274-10275 ISSN 1477-9226 Institutional support: RVO:61388955 Keywords : layered inorganic solids * physical chemistry * catalysis Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 4.197, year: 2014

  2. Sheared solid materials

    Indian Academy of Sciences (India)

    ingredient, solving the equations yields formation of dislocation dipoles or slips. In plastic ... We expect that m is a key order parameter for amorphous solids or glasses. .... It satisfies the mechanical equilibrium condition and can be calculated ...

  3. Solid Waste Management Districts

    Data.gov (United States)

    Vermont Center for Geographic Information — The Solid waste management districts layer is part of a dataset that contains administrative boundaries for Vermont's Agency of Natural Resources. This dataset...

  4. Solids Accumulation Scouting Studies

    Energy Technology Data Exchange (ETDEWEB)

    Duignan, M. R.; Steeper, T. J.; Steimke, J. L.

    2012-09-26

    The objective of Solids Accumulation activities was to perform scaled testing to understand the behavior of remaining solids in a Double Shell Tank (DST), specifically AW-105, at Hanford during multiple fill, mix, and transfer operations. It is important to know if fissionable materials can concentrate when waste is transferred from staging tanks prior to feeding waste treatment plants. Specifically, there is a concern that large, dense particles containing plutonium could accumulate in poorly mixed regions of a blend tank heel for tanks that employ mixing jet pumps. At the request of the DOE Hanford Tank Operations Contractor, Washington River Protection Solutions, the Engineering Development Laboratory of the Savannah River National Laboratory performed a scouting study in a 1/22-scale model of a waste staging tank to investigate this concern and to develop measurement techniques that could be applied in a more extensive study at a larger scale. Simulated waste tank solids: Gibbsite, Zirconia, Sand, and Stainless Steel, with stainless steel particles representing the heavier particles, e.g., plutonium, and supernatant were charged to the test tank and rotating liquid jets were used to mix most of the solids while the simulant was pumped out. Subsequently, the volume and shape of the mounds of residual solids and the spatial concentration profiles for the surrogate for heavier particles were measured. Several techniques were developed and equipment designed to accomplish the measurements needed and they included: 1. Magnetic particle separator to remove simulant stainless steel solids. A device was designed and built to capture these solids, which represent the heavier solids during a waste transfer from a staging tank. 2. Photographic equipment to determine the volume of the solids mounds. The mounds were photographed as they were exposed at different tank waste levels to develop a composite of topographical areas. 3. Laser rangefinders to determine the volume of

  5. Solid polymer electrolytes

    Science.gov (United States)

    Abraham, Kuzhikalail M.; Alamgir, Mohamed; Choe, Hyoun S.

    1995-01-01

    This invention relates to Li ion (Li.sup.+) conductive solid polymer electrolytes composed of poly(vinyl sulfone) and lithium salts, and their use in all-solid-state rechargeable lithium ion batteries. The lithium salts comprise low lattice energy lithium salts such as LiN(CF.sub.3 SO.sub.2).sub.2, LiAsF.sub.6, and LiClO.sub.4.

  6. Organic Molecular Solids

    CERN Document Server

    Schwoerer, Marcus

    2007-01-01

    This is the first comprehensive textbook on the physical aspects of organic solids. All phenomena which are necessary in order to understand modern technical applications are being dealt with in a way which makes the concepts of the topics accessible for students. The chapters - from the basics, production and characterization of organic solids and layers to organic semiconductors, superconductors and opto-electronical applications - have been arranged in a logical and well thought-out order.

  7. Theoretical Studies of Solid Nitromethane

    National Research Council Canada - National Science Library

    Sorescu, Dan

    2001-01-01

    .... The intermolecular potential used is of the Buckingham 6-exp form plus charge-charge Coulombic interactions and has been previously developed by us (Sorescu, D. C.; Rice, B. M.; Thompson, D. L. J: Phys. Chem. 1997, BlOl, 798...

  8. Equation of state for inert gas solids

    Indian Academy of Sciences (India)

    Srimath

    their melting points. The EOS is basically a pressure–volume–temperature relationship. The studies based on EOS are widely important not only in physics but ..... Earth Planet. Inter. 109, 1 (1998). [11] J Hama and K Suito, J. Phys. Condens. Matter 116, 133 (1999). [12] A Prasad, M Singh and B R K Gupta, Indian J. Phys.

  9. Laser cooling of solids

    CERN Document Server

    Petrushkin, S V

    2009-01-01

    Laser cooling is an important emerging technology in such areas as the cooling of semiconductors. The book examines and suggests solutions for a range of problems in the development of miniature solid-state laser refrigerators, self-cooling solid-state lasers and optical echo-processors. It begins by looking at the basic theory of laser cooling before considering such topics as self-cooling of active elements of solid-state lasers, laser cooling of solid-state information media of optical echo-processors, and problems of cooling solid-state quantum processors. Laser Cooling of Solids is an important contribution to the development of compact laser-powered cryogenic refrigerators, both for the academic community and those in the microelectronics and other industries. Provides a timely review of this promising field of research and discusses the fundamentals and theory of laser cooling Particular attention is given to the physics of cooling processes and the mathematical description of these processes Reviews p...

  10. 78 FR 11907 - Notice of Forthcoming Workshop To Discuss Revisions to NUREG/BR-0204, Rev. 2 “Instructions for...

    Science.gov (United States)

    2013-02-20

    ... radioactive waste disposal facilities if over-estimated. Additionally, the NRC staff received comments from... Performance Assessment Methodology for Low-Level Radioactive Waste Disposal Facilities'' (ADAMS Accession No..., Rev. 2 ``Instructions for Completing NRC's Uniform Low-Level Radioactive Waste Manifest.'' Information...

  11. Post-construction evaluation of bird abundances and distributions in the Horns Rev 2 offshore wind farm area, 2011 and 2012

    DEFF Research Database (Denmark)

    Petersen, Ib Krag; Nielsen, Rasmus Due; Mackenzie, Monique L.

    2014-01-01

    Optællinger af fugle fra fly efter linjetransekt-metoden blev anvendt til at beskrive fuglenes antal og udbredelse i undersøgelsesområdet. Ti optællinger før Horns Rev 2 mølleparkens opførelse blev sammenlignet med ti optællinger foretaget efter parkens etablering. Rumlig modellering blev anvendt...

  12. Evaluation of vaccination strategies against infection with feline immunodeficiency virus (FIV) based on recombinant viral vectors expressing FIV Rev and OrfA

    NARCIS (Netherlands)

    Huisman, W.; Schrauwen, E.J.A.; Tijhaar, E.; Süzer, Y.; Pas, S.D.; Amerongen, van G.; Sutter, G.; Rimmelzwaan, G.F.; Osterhaus, A.D.M.E.

    2008-01-01

    In recent years it has become clear that cell-mediated immunity is playing a role in the control of lentivirus infections. In particular, cytotoxic T lymphocyte responses have been associated with improved outcome of infection, especially those directed against the regulatory proteins like Rev and

  13. Situation analysis of physical independence of the equipment and safety circuits of Almaraz NPP regarding R.G. 1.75 rev.3 (2005)

    International Nuclear Information System (INIS)

    Seijas Portela, S.

    2010-01-01

    Situation analysis of physical independence of the electrical equipment and circuits CN safety Almaraz about R.G. 1.75 rev. 3. (2005) The aim of this paper is to present the work done in the analysis of the physical separation of redundant safety electrical equipment (emergency diesel generators, medium voltage, electrical cabinets, etc.) and physical separation of circuits and electrical conduits.

  14. 75 FR 75486 - Maritime Security Directive 104-6 (Rev. 4); Guidelines for U.S. Vessels Operating in High Risk...

    Science.gov (United States)

    2010-12-03

    ... Directive 104-6 (Rev. 4); Guidelines for U.S. Vessels Operating in High Risk Waters AGENCY: Coast Guard, DHS... Maritime Transportation Security Act (MTSA) on international voyages through or in designated high risk... MARSEC Directives are available at your local Captain of the Port (COTP) office. Phone numbers and...

  15. 76 FR 2402 - Maritime Security Directive 104-6 (Rev 5); Guidelines for U.S. Vessels Operating in High Risk Waters

    Science.gov (United States)

    2011-01-13

    ... Directive 104-6 (Rev 5); Guidelines for U.S. Vessels Operating in High Risk Waters AGENCY: Coast Guard, DHS... designated high risk waters, and provides additional counter-piracy guidance and mandatory measures for these... MARSEC Directives are available at your local Captain of the Port (COTP) office. Phone numbers and...

  16. Investigations of migratory birds during operation of Horns Rev offshore wind farm: Preliminary note of analysis of data from spring 2004

    International Nuclear Information System (INIS)

    Kjaer Christensen, T.; Hounisen, J.P.

    2004-01-01

    In February 1998, the Ministry of the Environment gave Elsam A/S and Eltra A.m.b.a. approval to erect a wind farm, capable of producing 160 MW of electric power, at Horns Rev, west of Blaevandshuk off the west coast of Jutland. Construction activities at Horns Rev started in September 2001 and were finished in summer 2002. The entire project has been organised as a demonstration project to assess the technical, economic and environmental constraints on the future development of electric power production in Danish offshore environments. Within the framework of the environmental programme, bird investigations have been carried out in relation to the risk of collision between birds and wind turbines since 2002. To provide the latest update on the results from the bird investigations, this note presents results compiled during spring 2004 and deals with a preliminary analysis of effects on birds present at Horns Rev during commercial operation of the Horns Rev wind farm. Due to the remoteness of the area it has not been possible to obtain base-line investigation of bird occurrence and behaviour at the wind farm site. (au)

  17. Specificity of RSG-1.2 peptide binding to RRE-IIB RNA element of HIV-1 over Rev peptide is mainly enthalpic in origin.

    Science.gov (United States)

    Kumar, Santosh; Bose, Debojit; Suryawanshi, Hemant; Sabharwal, Harshana; Mapa, Koyeli; Maiti, Souvik

    2011-01-01

    Rev is an essential HIV-1 regulatory protein which binds to the Rev responsive element (RRE) present within the env gene of HIV-1 RNA genome. This binding facilitates the transport of the RNA to the cytoplasm, which in turn triggers the switch between viral latency and active viral replication. Essential components of this complex have been localized to a minimal arginine rich Rev peptide and stem IIB region of RRE. A synthetic peptide known as RSG-1.2 binds with high binding affinity and specificity to the RRE-IIB than the Rev peptide, however the thermodynamic basis of this specificity has not yet been addressed. The present study aims to probe the thermodynamic origin of this specificity of RSG-1.2 over Rev Peptide for RRE-IIB. The temperature dependent melting studies show that RSG-1.2 binding stabilizes the RRE structure significantly (ΔT(m) = 4.3°C), in contrast to Rev binding. Interestingly the thermodynamic signatures of the binding have also been found to be different for both the peptides. At pH 7.5, RSG-1.2 binds RRE-IIB with a K(a) = 16.2±0.6×10(7) M(-1) where enthalpic change ΔH = -13.9±0.1 kcal/mol is the main driving force with limited unfavorable contribution from entropic change TΔS = -2.8±0.1 kcal/mol. A large part of ΔH may be due to specific stacking between U72 and Arg15. In contrast binding of Rev (K(a) = 3.1±0.4×10(7) M(-1)) is driven mainly by entropy (ΔH = 0 kcal/mol and TΔS = 10.2±0.2 kcal/mol) which arises from major conformational changes in the RNA upon binding.

  18. Sociological investigation of the reception of Horns Rev and Nysted offshore wind farms in the local communities[Denmark

    Energy Technology Data Exchange (ETDEWEB)

    Kuehn, S.

    2005-03-15

    This annual report presents the work related to the sociological part of the socio-economic project on the local communities' reception of the Horns Rev Offshore Wind Farm, west of Blaavands Huk in Jutland, and the Nysted Offshore Wind Farm, south of Lolland. The project is part of the monitoring programme in connection with the construction of the offshore wind farms. Unlike projects, which examine the impact of the wind farms on nature, the socio-economic project did not start until 2003. The socio-economic project examines the effects on the local communities. Among other things the environmental-economic part of the project examines the preferences of the population in relation to location of the wind farm and the willingness to pay for increasing the distance between the wind farms and the coast. The sociological survey is qualitative. The survey is divided into three phases, as the aim is to investigate the public community's attitude towards the erection of an offshore wind farm before and after the construction of the wind farm. This aim is based on the assumption that attitudes may change once the wind farm is erected and the population has experienced the visibility of the wind farm, etc. The division into phases is as follows: 1) Phase 1 treats the conditions as they were before the erection of Nysted Offshore Wind Farm. 2) Phase 2 is an investigation of the development in attitudes towards Horns Rev Offshore Wind Farm a year after erection. 3) Phase 3 comprises a follow-up investigation of the local area at Nysted Offshore Wind Farm. This annual report treats phases 1 and 2. Phase 1 was carried out in April-August 2003, and the interviews at Nysted were thus made during the erection of the first offshore wind turbines. Phase 2 was carried out in September-November 2003. The follow-up investigation of the conditions in the local area around Nysted offshore wind farm is to be carried out in August-December 2004. The results of the investigations

  19. Expression of the clock gene Rev-erbα in the brain controls the circadian organisation of food intake and locomotor activity, but not daily variations of energy metabolism

    NARCIS (Netherlands)

    Sen, Satish; Dumont, Stéphanie; Sage-Ciocca, Dominique; Reibel, Sophie; de Goede, Paul; Kalsbeek, Andries; Challet, Etienne

    2018-01-01

    The nuclear receptor REV-ERBα is part of the molecular clock mechanism and is considered to be involved in a variety of biological processes within metabolically active peripheral tissues as well. To investigate whether Rev-erbα (also known as Nr1d1) in the brain plays a role in the daily variations

  20. Xpf and not the Fanconi anaemia proteins or Rev3 accounts for the extreme resistance to cisplatin in Dictyostelium discoideum.

    Directory of Open Access Journals (Sweden)

    Xiao-Yin Zhang

    2009-09-01

    Full Text Available Organisms like Dictyostelium discoideum, often referred to as DNA damage "extremophiles", can survive exposure to extremely high doses of radiation and DNA crosslinking agents. These agents form highly toxic DNA crosslinks that cause extensive DNA damage. However, little is known about how Dictyostelium and the other "extremophiles" can tolerate and repair such large numbers of DNA crosslinks. Here we describe a comprehensive genetic analysis of crosslink repair in Dictyostelium discoideum. We analyse three gene groups that are crucial for a replication-coupled repair process that removes DNA crosslinks in higher eukarya: The Fanconi anaemia pathway (FA, translesion synthesis (TLS, and nucleotide excision repair. Gene disruption studies unexpectedly reveal that the FA genes and the TLS enzyme Rev3 play minor roles in tolerance to crosslinks in Dictyostelium. However, disruption of the Xpf nuclease subcomponent results in striking hypersensitivity to crosslinks. Genetic interaction studies reveal that although Xpf functions with FA and TLS gene products, most Xpf mediated repair is independent of these two gene groups. These results suggest that Dictyostelium utilises a distinct Xpf nuclease-mediated repair process to remove crosslinked DNA. Other DNA damage-resistant organisms and chemoresistant cancer cells might adopt a similar strategy to develop resistance to DNA crosslinking agents.

  1. Horns Rev offshore wind farm. Introducing hard bottom substrate sea bottom and marine biology. Data report 2001

    International Nuclear Information System (INIS)

    Leonhard, S.B.; Pedersen, John

    2002-08-01

    The Ministry of Environment and Energy requested ELSAM and ELTRA to establish an offshore wind farm with an output of 150 MW in the waters of Horns Rev, approximately 15 km off Blaevandshuk, which is the most westerly point of Denmark. The first phase of construction of the wind farm have started in spring 2002. Before the construction activities take place, a baseline description of the benthos has been conducted as a part of an environmental monitoring programme for the introduction of hard bottom substrates in the North Sea. The establishment of a monitoring programme is required according to some environmental guidelines for offshore wind farms prepared by the Danish Energy Agency. The monitoring programme established for the benthic infauna was performed in spring 2001. In addition to a proposed fish investigation programme concerning the stomach contents of fish a comparative programme on benthos was established as part of the monitoring programme. The benthos sampling in connection with the fish programme was conducted in autumn 2001. This benthic survey includes sampling in a proposed reference area for the fish surveys north east of the wind farm. This report presents the data of the baseline environmental survey of the seabed in the wind farm site and in the proposed reference site and a brief description of the weather conditions at the time of sampling. (au)

  2. Numerical modelling of the flow in the resin infusion process on the REV scale: A feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Jabbari, M.; Spangenberg, J.; Hattel, J. H. [Process Modelling Group, Department of Mechanical Engineering, Technical University of Denmark, Nils Koppels Allé, 2800 Kgs. Lyngby (Denmark); Jambhekar, V. A.; Helmig, R. [Department of Hydromechanics and Modelling of Hydrosystems, Institute for Modelling Hydraulic and Environmental Systems, Universität Stuttgart, Stuttgart (Germany); Gersborg, A. R. [SCION DTU, Diplomvej 373N, DK-2800 Lyngby (Denmark)

    2016-06-08

    The resin infusion process (RIP) has developed as a low cost method for manufacturing large fibre reinforced plastic parts. However, the process still presents some challenges to industry with regards to reliability and repeatability, resulting in expensive and inefficient trial and error development. In this paper, we show the implementation of 2D numerical models for the RIP using the open source simulator DuMu{sup X}. The idea of this study is to present a model which accounts for the interfacial forces coming from the capillary pressure on the so-called representative elementary volume (REV) scale. The model is described in detail and three different test cases — a constant and a tensorial permeability as well as a preform/Balsa domain — are investigated. The results show that the developed model is very applicable for the RIP for manufacturing of composite parts. The idea behind this study is to test the developed model for later use in a real application, in which the preform medium has numerous layers with different material properties.

  3. A comprehensive experiment for molecular biology: Determination of single nucleotide polymorphism in human REV3 gene using PCR-RFLP.

    Science.gov (United States)

    Zhang, Xu; Shao, Meng; Gao, Lu; Zhao, Yuanyuan; Sun, Zixuan; Zhou, Liping; Yan, Yongmin; Shao, Qixiang; Xu, Wenrong; Qian, Hui

    2017-07-08

    Laboratory exercise is helpful for medical students to understand the basic principles of molecular biology and to learn about the practical applications of molecular biology. We have designed a lab course on molecular biology about the determination of single nucleotide polymorphism (SNP) in human REV3 gene, the product of which is a subunit of DNA polymerase ζ and SNPs in this gene are associated with altered susceptibility to cancer. This newly designed experiment is composed of three parts, including genomic DNA extraction, gene amplification by PCR, and genotyping by RFLP. By combining these activities, the students are not only able to learn a series of biotechniques in molecular biology, but also acquire the ability to link the learned knowledge with practical applications. This comprehensive experiment will help the medical students improve the conceptual understanding of SNP and the technical understanding of SNP detection. © 2017 by The International Union of Biochemistry and Molecular Biology, 45(4):299-304, 2017. © 2017 The International Union of Biochemistry and Molecular Biology.

  4. Travelling-wave amplitudes as solutions of the phase-field crystal equation

    Science.gov (United States)

    Nizovtseva, I. G.; Galenko, P. K.

    2018-01-01

    The dynamics of the diffuse interface between liquid and solid states is analysed. The diffuse interface is considered as an envelope of atomic density amplitudes as predicted by the phase-field crystal model (Elder et al. 2004 Phys. Rev. E 70, 051605 (doi:10.1103/PhysRevE.70.051605); Elder et al. 2007 Phys. Rev. B 75, 064107 (doi:10.1103/PhysRevB.75.064107)). The propagation of crystalline amplitudes into metastable liquid is described by the hyperbolic equation of an extended Allen-Cahn type (Galenko & Jou 2005 Phys. Rev. E 71, 046125 (doi:10.1103/PhysRevE.71.046125)) for which the complete set of analytical travelling-wave solutions is obtained by the method (Malfliet & Hereman 1996 Phys. Scr. 15, 563-568 (doi:10.1088/0031-8949/54/6/003); Wazwaz 2004 Appl. Math. Comput. 154, 713-723 (doi:10.1016/S0096-3003(03)00745-8)). The general solution of travelling waves is based on the function of hyperbolic tangent. Together with its set of particular solutions, the general solution is analysed within an example of specific task about the crystal front invading metastable liquid (Galenko et al. 2015 Phys. D 308, 1-10 (doi:10.1016/j.physd.2015.06.002)). The influence of the driving force on the phase-field profile, amplitude velocity and correlation length is investigated for various relaxation times of the gradient flow. This article is part of the theme issue `From atomistic interfaces to dendritic patterns'.

  5. ATLAS note ATL-COM-PHYS-2009

    International Nuclear Information System (INIS)

    Chekanov, S.; Boomsma, J.

    2009-01-01

    The program InvMass has been developed to perform a general model-independent search for new particles using the ATLAS detector at the Large Hadron Collider (LHC), a proton-proton collider at CERN. The search is performed by examining statistically significant variations from the Standard Model predictions in exclusive event classes classified according to the number of identified objects. The program, called InvMass, finds all relevant particle groups identified with the ATLAS detector and analyzes their production rates, invariant masses and the total transverse momenta. The generic code of InvMass can easily be adapted for any particle types identified with the ATLAS detector. Several benchmark tests are presented.

  6. Solid biomass barometer

    International Nuclear Information System (INIS)

    Anon.

    2006-01-01

    The European (EU 25) wish to substitute solid biomass origin energy consumption (principally wood and wood waste, but also straw, crop harvest residues, vegetal and animal waste) for a part of that of fossil fuel origin (petrol, gas and coal) is beginning to pay off. 58,7 million tons oil equivalent (Mtoe) of solid biomass was produced in 2005, i.e. a 3.1 Mtoe increase with respect to 2004. Production of primary energy coming from direct combustion of renewable municipal solid waste in incineration plants should also be added on to this figure. The 0,2 Mtoe increase in this production with respect to 2004 brings valorization of this type of waste up to 5,3 Mtoe in 2005. (author)

  7. Solid electrolyte fuel cells

    Science.gov (United States)

    Isaacs, H. S.

    Progress in the development of functioning solid electrolyte fuel cells is summarized. The solid electrolyte cells perform at 1000 C, a temperature elevated enough to indicate high efficiencies are available, especially if the cell is combined with a steam generator/turbine system. The system is noted to be sulfur tolerant, so coal containing significant amounts of sulfur is expected to yield satisfactory performances with low parasitic losses for gasification and purification. Solid oxide systems are electrically reversible, and are usable in both fuel cell and electrolysis modes. Employing zirconium and yttrium in the electrolyte provides component stability with time, a feature not present with other fuel cells. The chemical reactions producing the cell current are reviewed, along with materials choices for the cathodes, anodes, and interconnections.

  8. Photochemistry on solid surfaces

    CERN Document Server

    Matsuura, T

    1989-01-01

    The latest developments in photochemistry on solid surfaces, i.e. photochemistry in heterogeneous systems, including liquid crystallines, are brought together for the first time in a single volume. Distinguished photochemists from various fields have contributed to the book which covers a number of important applications: molecular photo-devices for super-memory, photochemical vapor deposition to produce thin-layered electronic semiconducting materials, sensitive optical media, the control of photochemical reactions pathways, etc. Photochemistry on solid surfaces is now a major field and this

  9. Proton tunneling in solids

    Energy Technology Data Exchange (ETDEWEB)

    Kondo, J.

    1998-10-01

    The tunneling rate of the proton and its isotopes between interstitial sites in solids is studied theoretically. The phonons and/or the electrons in the solid have two effects on the tunneling phenomenon. First, they suppress the transfer integral between two neighbouring states. Second, they give rise to a finite lifetime of the proton state. Usually the second effect is large and the tunneling probability per unit time (tunneling rate) can be defined. In some cases, however, a coherent tunneling is expected and actually observed. (author)

  10. Hybrid elastic solids

    KAUST Repository

    Lai, Yun

    2011-06-26

    Metamaterials can exhibit electromagnetic and elastic characteristics beyond those found in nature. In this work, we present a design of elastic metamaterial that exhibits multiple resonances in its building blocks. Band structure calculations show two negative dispersion bands, of which one supports only compressional waves and thereby blurs the distinction between a fluid and a solid over a finite frequency regime, whereas the other displays super anisotropy-in which compressional waves and shear waves can propagate only along different directions. Such unusual characteristics, well explained by the effective medium theory, have no comparable analogue in conventional solids and may lead to novel applications. © 2011 Macmillan Publishers Limited. All rights reserved.

  11. Hybrid elastic solids

    KAUST Repository

    Lai, Yun; Wu, Ying; Sheng, Ping; Zhang, Zhaoqing

    2011-01-01

    Metamaterials can exhibit electromagnetic and elastic characteristics beyond those found in nature. In this work, we present a design of elastic metamaterial that exhibits multiple resonances in its building blocks. Band structure calculations show two negative dispersion bands, of which one supports only compressional waves and thereby blurs the distinction between a fluid and a solid over a finite frequency regime, whereas the other displays super anisotropy-in which compressional waves and shear waves can propagate only along different directions. Such unusual characteristics, well explained by the effective medium theory, have no comparable analogue in conventional solids and may lead to novel applications. © 2011 Macmillan Publishers Limited. All rights reserved.

  12. Solid phase assays

    International Nuclear Information System (INIS)

    Reese, M.G.; Johnson, L.R.; Ransom, D.K.

    1980-01-01

    In a solid phase assay for quantitative determination of biological and other analytes, a sample such as serum is contacted with a receptor for the analyte being assayed, the receptor being supported on a solid support. No tracer for the analyte is added to the sample before contacting with the receptor; instead the tracer is contacted with the receptor after unbound analyte has been removed from the receptor. The assay can be otherwise performed in a conventional manner but can give greater sensitivity. (author)

  13. Proton tunneling in solids

    International Nuclear Information System (INIS)

    Kondo, J.

    1998-01-01

    The tunneling rate of the proton and its isotopes between interstitial sites in solids is studied theoretically. The phonons and/or the electrons in the solid have two effects on the tunneling phenomenon. First, they suppress the transfer integral between two neighbouring states. Second, they give rise to a finite lifetime of the proton state. Usually the second effect is large and the tunneling probability per unit time (tunneling rate) can be defined. In some cases, however, a coherent tunneling is expected and actually observed. (author)

  14. Solid-state circuits

    CERN Document Server

    Pridham, G J

    2013-01-01

    Solid-State Circuits provides an introduction to the theory and practice underlying solid-state circuits, laying particular emphasis on field effect transistors and integrated circuits. Topics range from construction and characteristics of semiconductor devices to rectification and power supplies, low-frequency amplifiers, sine- and square-wave oscillators, and high-frequency effects and circuits. Black-box equivalent circuits of bipolar transistors, physical equivalent circuits of bipolar transistors, and equivalent circuits of field effect transistors are also covered. This volume is divided

  15. Solid state theory

    CERN Document Server

    Harrison, Walter A

    2011-01-01

    ""A well-written text . . . should find a wide readership, especially among graduate students."" - Dr. J. I. Pankove, RCA.The field of solid state theory, including crystallography, semi-conductor physics, and various applications in chemistry and electrical engineering, is highly relevant to many areas of modern science and industry. Professor Harrison's well-known text offers an excellent one-year graduate course in this active and important area of research. While presenting a broad overview of the fundamental concepts and methods of solid state physics, including the basic quantum theory o

  16. Solid-State Nanopore

    Directory of Open Access Journals (Sweden)

    Zhishan Yuan

    2018-02-01

    Full Text Available Abstract Solid-state nanopore has captured the attention of many researchers due to its characteristic of nanoscale. Now, different fabrication methods have been reported, which can be summarized into two broad categories: “top-down” etching technology and “bottom-up” shrinkage technology. Ion track etching method, mask etching method chemical solution etching method, and high-energy particle etching and shrinkage method are exhibited in this report. Besides, we also discussed applications of solid-state nanopore fabrication technology in DNA sequencing, protein detection, and energy conversion.

  17. Optical properties of solids

    CERN Document Server

    Wooten, Frederick

    1972-01-01

    Optical Properties of Solids covers the important concepts of intrinsic optical properties and photoelectric emission. The book starts by providing an introduction to the fundamental optical spectra of solids. The text then discusses Maxwell's equations and the dielectric function; absorption and dispersion; and the theory of free-electron metals. The quantum mechanical theory of direct and indirect transitions between bands; the applications of dispersion relations; and the derivation of an expression for the dielectric function in the self-consistent field approximation are also encompassed.

  18. Base-line investigations of birds in relation to an offshore wind farm at Horns Rev: results and conclusions 2000/2001

    Energy Technology Data Exchange (ETDEWEB)

    Kjaer Christensen, T.; Clausager, I.; Krag Petersen, I. [NERI, Dept. of Coastal Zone Ecology, Roskilde (Denmark)

    2001-07-01

    This report presents the combined results of two years of base-line investigations of birds performed during August 1999 - April 2001 in relation to the proposed construction of an offshore wind farm at Horns Rev in the Danish part of the North Sea ca 14 km southwest of Blaevandshuk. Based on the distribution of the most abundant bird species recorded during 13 aerial surveys, there were no indications that the wind farm area was of any particular importance to the birds' exploitation of the Horns Rev area. Fish-eating species like divers, gannet, terns, auks and gulls generally showed scattered and variable distributions, occurring in the areas north and south of Horns Rev, and with low numbers occurring on the reef proper and within the planned wind farm area. The distribution of benthic foraging species, eider and common scoter, showed that they mainly exploited the coastal parts of the area off Blaevandshuk and Skallingen, although the common scoter was found in relatively high numbers on the southeast slopes of Horns Rev and within the wind farm area in the April 2001 survey. Preference analyses of bird exploitation of the Horns Rev area showed that if the birds completely avoid the wind farm area after erection of the wind turbines, this will affects less than 1% of the different species, except divers of which 1.65% will be affected. If the birds avoid the wind farm area and an adjacent 4 km zone (worst case scenario), it is estimated to affect 11% of the common scoter, 10% of the gannet, 7-9% of the divers, alcids and velvet scoter and 0-6% of the remaining species. The seasonal occurrence of the recorded species was fully comparable to the seasonal occurrence of these species recorded at Blaevandshuk since 1963. Year-to-year variation in abundance between the seasons August 1999 - April 2000 and August 2000 - April 2001 was mainly found in species that migrate through the Horns Rev area (terns, gannet, kittiwake), and with less pronounced variation in

  19. Base-line investigations of birds in relation to an offshore wind farm at Horns Rev: results and conclusions 2000/2001

    International Nuclear Information System (INIS)

    Kjaer Christensen, T.; Clausager, I.; Krag Petersen, I.

    2001-01-01

    This report presents the combined results of two years of base-line investigations of birds performed during August 1999 - April 2001 in relation to the proposed construction of an offshore wind farm at Horns Rev in the Danish part of the North Sea ca 14 km southwest of Blaevandshuk. Based on the distribution of the most abundant bird species recorded during 13 aerial surveys, there were no indications that the wind farm area was of any particular importance to the birds' exploitation of the Horns Rev area. Fish-eating species like divers, gannet, terns, auks and gulls generally showed scattered and variable distributions, occurring in the areas north and south of Horns Rev, and with low numbers occurring on the reef proper and within the planned wind farm area. The distribution of benthic foraging species, eider and common scoter, showed that they mainly exploited the coastal parts of the area off Blaevandshuk and Skallingen, although the common scoter was found in relatively high numbers on the southeast slopes of Horns Rev and within the wind farm area in the April 2001 survey. Preference analyses of bird exploitation of the Horns Rev area showed that if the birds completely avoid the wind farm area after erection of the wind turbines, this will affects less than 1% of the different species, except divers of which 1.65% will be affected. If the birds avoid the wind farm area and an adjacent 4 km zone (worst case scenario), it is estimated to affect 11% of the common scoter, 10% of the gannet, 7-9% of the divers, alcids and velvet scoter and 0-6% of the remaining species. The seasonal occurrence of the recorded species was fully comparable to the seasonal occurrence of these species recorded at Blaevandshuk since 1963. Year-to-year variation in abundance between the seasons August 1999 - April 2000 and August 2000 - April 2001 was mainly found in species that migrate through the Horns Rev area (terns, gannet, kittiwake), and with less pronounced variation in

  20. RevSex duplication-induced and sex-related differences in the SOX9 regulatory region chromatin landscape in human fibroblasts.

    Science.gov (United States)

    Lybæk, Helle; de Bruijn, Diederik; den Engelsman-van Dijk, Anke H A; Vanichkina, Darya; Nepal, Chirag; Brendehaug, Atle; Houge, Gunnar

    2014-03-01

    It was recently shown that duplications of the RevSex element, located 0.5 Mb upstream of SOX9, cause XX-disorder of sex development (DSD), and that deletions cause XY-DSD. To explore how a 148 kb RevSex duplication could have turned on gonadal SOX9 expression in the absence of SRY in an XX-male, we examined the chromatin landscape in primary skin fibroblast cultures from the index, his RevSex duplication-carrier father and six controls. The ENCODE project supports the notion that chromatin state maps show overlap between different cell types, i.e., that our study of fibroblasts could be of biological relevance. We examined the SOX9 regulatory region by high-resolution ChIP-on-chip experiments (a kind of "chromatin-CGH") and DNA methylation investigations. The RevSex duplication was associated with chromatin changes predicting better accessibility of the SRY-responsive TESCO enhancer region 14-15 kb upstream of SOX9. Four kb downstream of the TESCO evolutionary conserved region, a peak of the enhancer/promoter-associated H3K4me3 mark was found together with a major dip of the repressive H3K9me3 chromatin mark. Similar differences were also found when three control males were compared with three control females. A marked male/female difference was a more open chromatin signature in males starting ~400 kb upstream of SOX9 and increasing toward the SOX9 promoter. In the RevSex duplication-carrier father, two positions of DNA hypomethylation were also found, one corresponding to the H3K4me3 peak mentioned above. Our results suggest that the RevSex duplication could operate by inducing long-range epigenetic changes. Furthermore, the differences in chromatin state maps between males and females suggest that the Y chromosome or X chromosome dosage may affect chromatin conformation, i.e., that sex-dependent gene regulation may take place by chromatin modification.

  1. Electron-impact-induced K plus M shell ionization in solid targets of medium-Z elements studied by means of high-resolution x-ray spectroscopy

    International Nuclear Information System (INIS)

    Ludziejewski, T.; Rymuza, P.; Sujkowski, Z.; Borchert, G.; Dousse, J.; Rheme, C.; Polasik, M.

    1996-01-01

    The Kβ 2 x-ray spectra of zirconium, niobium, molybdenum, and palladium bombarded by 150 and 300 keV electrons were measured with a high-resolution transmission curved crystal spectrometer. Multiconfiguration Dirac-Fock calculations were used for the decomposition of the experimental spectra into the Kβ 2 M 0 (diagram) and Kβ 2 M 1 (satellite) components. The probabilities of energy dependent (direct Coulomb and two-step) processes were estimated from the differences in the satellite line yields for electrons and photons. The satellite yields are found to be considerably enhanced in comparison with those for the proton-induced ionization recently measured and analyzed in the same way [T. Ludziejewski et al., Phys. Rev. A 52, 2791 (1995)]. This result indicates the importance of multielectron effects in the K plus M shell ionization by energetic projectiles. copyright 1996 The American Physical Society

  2. s |-|~o RT"? REv

    African Journals Online (AJOL)

    subserving any useful function)”. Tumour arising from any portion of the eyeball either on thesurface or within the eyeball constitutes an ocular neoplasm. Ocular tumours may be benign with a slow propensity to proliferation. Metastasis is rare. However, the function may be compromised due too compression of.

  3. Nuclear Power Plants (Rev.)

    Energy Technology Data Exchange (ETDEWEB)

    Lyerly, Ray L.; Mitchell III, Walter [Southern Nuclear Engineering, Inc.

    1973-01-01

    Projected energy requirements for the future suggest that we must employ atomic energy to generate electric power or face depletion of our fossil-fuel resources—coal, oil, and gas. In short, both conservation and economic considerations will require us to use nuclear energy to generate the electricity that supports our civilization. Until we reach the time when nuclear power plants are as common as fossil-fueled or hydroelectric plants, many people will wonder how the nuclear plants work, how much they cost, where they are located, and what kinds of reactors they use. The purpose of this booklet is to answer these questions. In doing so, it will consider only central station plants, which are those that provide electric power for established utility systems.

  4. Electricity and Man (Rev.)

    Energy Technology Data Exchange (ETDEWEB)

    Asimov, Isaac

    1974-01-01

    Our whole industrial civilization depends upon cheap energy streaking out in all directions and under fingertip controls—and that would be very difficult without electric current. It would take enormous ingenuity to find substitutes. If all electricity were shut off, then all electronic devices would be dead. Electric lights would darken. Aluminum would become a rare metal. All factories would have to develop power sources on the spot and would have to switch to primitive, mechanical controls. Every house and every farm would have to give up items we have come to take for granted—not only electric lights, but electric irons, electric toasters, electric water pumps, electric control of furnaces, and so on.

  5. Premixed Supersonic Combustion (Rev)

    Science.gov (United States)

    2015-02-20

    calculated using the 1-D separated flow model for the isolator described in Heiser and Pratt (Ref. 19). Several curves are shown. The green curve corresponds...Report 88-3059, 1988. [18] Krauss, R.H. and McDaniel, J.C., “A Clean Air Continuous Flow Propulsion Facility,” AIAA Report 92-3912, 1992. [19] Heiser

  6. Radiotherapy. 2. rev. ed.

    International Nuclear Information System (INIS)

    Wannenmacher, Michael; Debus, Juergen; Wenz, Frederik

    2013-01-01

    The purpose of this medical specialty book, besides presenting the state of the art in clinical radiotherapy and radiooncology, is to explain the basic principles of medical physics and radiobiology. Following a number of chapters on general topics and theory it provides detailed coverage of the individual organ systems, briefly addressing future aspects in the process. The authors relate their view that radiooncology as a medical specialty will continue to be under pressure to change and that it will take continuous innovation to secure its status within the interdisciplinary context around the treatment of cancer patients. The authors of this, the textbook's second edition, have dedicated much space to modern methods and techniques in order to do justice to these developments.

  7. Whole Body Counters (rev.)

    Energy Technology Data Exchange (ETDEWEB)

    Woodburn, John H. [Walter Johnson High School, Rockville, MD; Lengemann, Frederick W. [Cornell University

    1967-01-01

    Whole body counters are radiation detecting and measuring instruments that provide information about the human body. This booklet describes different whole body counters, scientific principles that are applied to their design, and ways they are used.

  8. Thiokol Solid Rocket Motors

    Science.gov (United States)

    Graves, S. R.

    2000-01-01

    This paper presents viewgraphs on thiokol solid rocket motors. The topics include: 1) Communications; 2) Military and government intelligence; 3) Positioning satellites; 4) Remote sensing; 5) Space burial; 6) Science; 7) Space manufacturing; 8) Advertising; 9) Space rescue space debris management; 10) Space tourism; 11) Space settlements; 12) Hazardous waste disposal; 13) Extraterrestrial resources; 14) Fast package delivery; and 15) Space utilities.

  9. Physical properties of solids

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Research at ORNL into the physical properties of solids is described. Topics covered include: optical, electrical, and magnetic properties of magnesium oxide; ionic conductivity and superconductivity; surface physics and catalysis; defects and impurities in insulating crystals; photovoltaic conversion of solar energy; and fracture studies

  10. Current Solid Mechanics Research

    DEFF Research Database (Denmark)

    Tvergaard, Viggo

    2016-01-01

    About thirty years ago James Lighthill wrote an essay on “What is Mechanics?” With that he also included some examples of the applications of mechanics. While his emphasis was on fluid mechanics, his own research area, he also included examples from research activities in solid mechanics....

  11. Solid state track detectors

    International Nuclear Information System (INIS)

    Reuther, H.

    1976-11-01

    This paper gives a survey of the present state of the development and the application of solid state track detectors. The fundamentals of the physical and chemical processes of the track formation and development are explained, the different detector materials and their registration characteristics are mentioned, the possibilities of the experimental practice and the most variable applications are discussed. (author)

  12. Solid biomass barometer 2011

    International Nuclear Information System (INIS)

    2012-01-01

    The winter of 2011 was exceptionally mild, even in Northern Europe, with unusually warm temperatures. As a result the demand for firewood and solid biomass fuel was low. The European Union's primary energy production from solid biomass contracted by 2.9% slipping to 78.8 Mtoe. The first 4 countries are Germany (11.690 Mtoe), France (9.223 Mtoe), Sweden (8.165 Mtoe) and Finland (7.476 Mtoe) and when the production is relative to the population the first 4 countries become: Finland (1.391 toe/inhab.), Sweden (0.867 toe/inhab.), Latvia (0.784 toe/inhab.) and Estonia (0.644 toe/inhab.). Solid biomass electricity production continued to grow, driven by the additional take-up of biomass co-firing, to reach 72.800 TWh at the end of 2011, it means +2.6% compared to 2010. The energy policy of various states concerning solid biomass is analyzed

  13. Solid Oxide Fuel Cell

    DEFF Research Database (Denmark)

    2010-01-01

    The solid oxide fuel cell comprising a metallic support material, an active anode layer consisting of a good hydrocarbon cracking catalyst, an electrolyte layer, an active cathode layer, and a transition layer consisting of preferably a mixture of LSM and a ferrite to the cathode current collector...

  14. Solid-Waste Management

    Science.gov (United States)

    Science Teacher, 1973

    1973-01-01

    Consists of excerpts from a forthcoming publication of the United States Environmental Protection Agency, Student's Guide to Solid-Waste Management.'' Discusses the sources of wastes from farms, mines, factories, and communities, the job of governments, ways to collect trash, methods of disposal, processing, and suggests possible student action.…

  15. Continuous mixing of solids

    NARCIS (Netherlands)

    Raouf, M.S.

    1963-01-01

    The most important literature on theoretical aspects of mixing solids was reviewed.

    Only when the mixed materials showed no segregation it was possible to analyse the mixing process quantitatively. In this case the mixture could be described by the 'χ' Square test. Longitudinal mixing could be

  16. Physical properties of solids

    Energy Technology Data Exchange (ETDEWEB)

    Wilkinson, M. K.; Young, Jr, F. W.

    1977-10-01

    Research at ORNL into the physical properties of solids is described. Topics covered include: optical, electrical, and magnetic properties of magnesium oxide; ionic conductivity and superconductivity; surface physics and catalysis; defects and impurities in insulating crystals; photovoltaic conversion of solar energy; and fracture studies. (GHT)

  17. Standard High Solids Vessel Design De-inventory Simulant Qualification

    Energy Technology Data Exchange (ETDEWEB)

    Fiskum, Sandra K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burns, Carolyn A.M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gauglitz, Phillip A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Linn, Diana T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Peterson, Reid A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smoot, Margaret R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-09-12

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is working to develop a Standard High Solids Vessel Design (SHSVD) process vessel. To support testing of this new design, WTP engineering staff requested that a Newtonian simulant be developed that would represent the de-inventory (residual high-density tank solids cleanout) process. Its basis and target characteristics are defined in 24590-WTP-ES-ENG-16-021 and implemented through PNNL Test Plan TP-WTPSP-132 Rev. 1.0. This document describes the de-inventory Newtonian carrier fluid (DNCF) simulant composition that will satisfy the basis requirement to mimic the density (1.18 g/mL ± 0.1 g/mL) and viscosity (2.8 cP ± 0.5 cP) of 5 M NaOH at 25 °C.1 The simulant viscosity changes significantly with temperature. Therefore, various solution compositions may be required, dependent on the test stand process temperature range, to meet these requirements. Table ES.1 provides DNCF compositions at selected temperatures that will meet the density and viscosity specifications as well as the temperature range at which the solution will meet the acceptable viscosity tolerance.

  18. Gallium Arsenide and Related Compounds, 1986.

    Science.gov (United States)

    1986-01-01

    F-Yiuang, WL,, PK Rhattacharva, UDas, A Chin , IJlackson and D L Persechini 417 -422 High quality lattice matched lnGaAs/InP heterostructures prepared...Sci. Technol. B3 1162. Schwartz G. P. 1983 Thin solid Films 103 3. Spicer W. E., Lindau I., Skeath P. R., Su C Y. and Chye P. W. 19R0 Phys. Rev. Lett... Chin R, Nakano K, and Milano R A 1981 IEEE J. Quantum Electron. QEJJ7, 275. Murgatroyd I J, Norman A G, and Booker G R 1986 Phys. Rev. Lett

  19. Horns Rev offshore wind farm. Introducing hard bottom substrate sea bottom and marine biology. Status report 2001

    International Nuclear Information System (INIS)

    Leonhard, S.B.; Pedersen, John

    2002-08-01

    A baseline description of the benthos was carried out in spring and autumn 2001 prior to the construction of an offshore wind farm at Horns Rev, situated approximately 15 km off Blaevands Huk, which is Denmark's most westerly point. The surveys have been conducted as part of an environmental monitoring programme for the introduction of hard bottom substrates in the North Sea. The establishment of a monitoring programme is required according to some environmental guidelines set up by the Danish Energy Agency for offshore wind farms. Because no environmental criteria existed for benthic communities in connection with the construction activities, no power analysis was made prior to the design of the monitoring programme. The monitoring programme established for the benthic infauna is thus somewhat limited and only major changes in the community structure are expected to be detectable. The baseline description for the benthic infauna can also be used for comparison of the stomach contents of fish in a comparative programme. A newly defined reference area may be introduced for the fish programme why sampling in this area was carried out in the autumn 2001. Samples were recovered at a total of 18 stations at 6 wind turbine locations in the wind farm area in June 2001 and at a total of 9 stations at 3 wind turbine locations in September 2001. In September additional sampling was carried out at 5 stations in a designated reference area. At the wind turbine locations sampling was carried out at 3 stations located 5, 25 and 100 m from the edge of the planned scour protection. Samples were analysed for sediment characteristics and for benthic infauna. Only the benthos relating to the macrofauna was investigated during the surveys. (au)

  20. Revival and emended description of 'Mycobacterium paraffinicum' Davis, Chase and Raymond 1956 as Mycobacterium paraffinicum sp. nov., nom. rev.

    Science.gov (United States)

    Toney, Nadege; Adekambi, Toidi; Toney, Sean; Yakrus, Mitchell; Butler, W Ray

    2010-10-01

    The omission of the name 'Mycobacterium paraffinicum' from the Approved Lists of Bacterial Names was due to phenotypic confusion surrounding a close relationship with Mycobacterium scrofulaceum. Correspondingly, 'M. paraffinicum' strains grew slowly in > 7 days, stained acid-alcohol-fast and produced yellow-pigmented, smooth, waxy colonies in the dark at an optimal temperature of 35°C. However, 'M. paraffinicum' strains demonstrated no activity for urease, nicotinamidase or pyrazinamidase and lacked growth at 42°C, unlike M. scrofulaceum. The mycolic acid pattern, as determined by HPLC, clustered 'M. paraffinicum' with M. scrofulaceum, Mycobacterium avium and Mycobacterium parascrofulaceum. Strains were fully susceptible to linezolid, rifabutin, clarithromycin and amikacin. Examination of the historical reference strain of 'M. paraffinicum', ATCC 12670, and five additional isolates using comparative studies with 16S rRNA, hsp65 and rpoB gene and concatenated sequences showed that they formed a tight taxonomic group that was distinct from similar non-tuberculous mycobacteria. Multilocus enzyme electrophoresis (MEE) analysis confirmed a close association of the five additional isolates with the reference strain of 'M. paraffinicum' with a genetic distance of 0.12 and showed that all six strains were distinct from other closely related species. These genetic results provided unambiguous evidence of the uniqueness of this slowly growing, scotochromogenic species and supported the revival of the name as Mycobacterium paraffinicum (ex Davis, Chase and Raymond 1956) sp. nov., nom. rev. We propose the previously deposited reference strain ATCC 12670(T) =DSM 44181(T) =NCIMB 10420(T), located in collections worldwide, as the type strain.

  1. Horns Rev offshore wind farm. Introducing hard bottom substrate sea bottom and marine biology. Status report 2001

    Energy Technology Data Exchange (ETDEWEB)

    Leonhard, S.B.; Pedersen, John

    2002-08-15

    A baseline description of the benthos was carried out in spring and autumn 2001 prior to the construction of an offshore wind farm at Horns Rev, situated approximately 15 km off Blaevands Huk, which is Denmark's most westerly point. The surveys have been conducted as part of an environmental monitoring programme for the introduction of hard bottom substrates in the North Sea. The establishment of a monitoring programme is required according to some environmental guidelines set up by the Danish Energy Agency for offshore wind farms. Because no environmental criteria existed for benthic communities in connection with the construction activities, no power analysis was made prior to the design of the monitoring programme. The monitoring programme established for the benthic infauna is thus somewhat limited and only major changes in the community structure are expected to be detectable. The baseline description for the benthic infauna can also be used for comparison of the stomach contents of fish in a comparative programme. A newly defined reference area may be introduced for the fish programme why sampling in this area was carried out in the autumn 2001. Samples were recovered at a total of 18 stations at 6 wind turbine locations in the wind farm area in June 2001 and at a total of 9 stations at 3 wind turbine locations in September 2001. In September additional sampling was carried out at 5 stations in a designated reference area. At the wind turbine locations sampling was carried out at 3 stations located 5, 25 and 100 m from the edge of the planned scour protection. Samples were analysed for sediment characteristics and for benthic infauna. Only the benthos relating to the macrofauna was investigated during the surveys. (au)

  2. Horns Rev offshore wind farm. Introducing hard bottom substrate sea bottom and marine biology. Status report 2001

    Energy Technology Data Exchange (ETDEWEB)

    Leonhard, S B; Pedersen, John

    2002-08-15

    A baseline description of the benthos was carried out in spring and autumn 2001 prior to the construction of an offshore wind farm at Horns Rev, situated approximately 15 km off Blaevands Huk, which is Denmark's most westerly point. The surveys have been conducted as part of an environmental monitoring programme for the introduction of hard bottom substrates in the North Sea. The establishment of a monitoring programme is required according to some environmental guidelines set up by the Danish Energy Agency for offshore wind farms. Because no environmental criteria existed for benthic communities in connection with the construction activities, no power analysis was made prior to the design of the monitoring programme. The monitoring programme established for the benthic infauna is thus somewhat limited and only major changes in the community structure are expected to be detectable. The baseline description for the benthic infauna can also be used for comparison of the stomach contents of fish in a comparative programme. A newly defined reference area may be introduced for the fish programme why sampling in this area was carried out in the autumn 2001. Samples were recovered at a total of 18 stations at 6 wind turbine locations in the wind farm area in June 2001 and at a total of 9 stations at 3 wind turbine locations in September 2001. In September additional sampling was carried out at 5 stations in a designated reference area. At the wind turbine locations sampling was carried out at 3 stations located 5, 25 and 100 m from the edge of the planned scour protection. Samples were analysed for sediment characteristics and for benthic infauna. Only the benthos relating to the macrofauna was investigated during the surveys. (au)

  3. SolidWorks Administration Bible

    CERN Document Server

    Lombard, Matt

    2009-01-01

    What you need to prepare, install, and maintain SolidWorks. It's not enough to know how to use SolidWorks, if your job also requires you to install or maintain it, train new users, and implement standards. This in-depth guide was written for those of you who have to actually manage your company's SolidWorks system. From hardware selection to helping users to licensing and more, this is the everyday, bread-and-butter SolidWorks administration resource that IT and CAD managers have been seeking.:; SolidWorks is a powerful 3D solid modeling system that is popular with CAD users everywhere, but of

  4. Luminescence and the solid state

    CERN Document Server

    Ropp, Richard C

    2013-01-01

    Since the discovery of the transistor in 1948, the study of the solid state has been burgeoning. Recently, cold fusion and the ceramic superconductor have given cause for excitement. There are two approaches possible to this area of science, namely, that of solid state physics and solid state chemistry, although both overlap extensively. The former is more concerned with electronic states in solids (including electromagnetics) whereas the latter is more concerned with interactions of atoms in solids. The area of solid state physics is well documented, however, there are very few texts which de

  5. Spin dynamics in the strong spin-orbit coupling regime

    Czech Academy of Sciences Publication Activity Database

    Liu, X.; Liu, X.-J.; Sinova, Jairo

    2011-01-01

    Roč. 84, č. 3 (2011), 035318/1-035318/9 ISSN 1098-0121 Institutional research plan: CEZ:AV0Z10100521 Keywords : semiconductor quntum- wells Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.691, year: 2011 http://link.aps.org/doi/10.1103/PhysRevB.84.035318

  6. Quantification of correlations in quantum many-particle systems

    Czech Academy of Sciences Publication Activity Database

    Byczuk, K.; Kuneš, Jan; Hofstetter, W.; Vollhardt, D.

    2012-01-01

    Roč. 108, č. 8 (2012), "087004-1"-"087004-5" ISSN 0031-9007 Institutional research plan: CEZ:AV0Z10100521 Keywords : electronic correlations * entropy Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 7.943, year: 2012 http://link.aps.org/doi/10.1103/PhysRevLett.108.087004

  7. Scaling of the anomalous Hall effect in the insulating regime

    Czech Academy of Sciences Publication Activity Database

    Liu, X.-J.; Liu, X.; Sinova, Jairo

    2011-01-01

    Roč. 84, č. 16 (2011), 165304/1-165304/11 ISSN 1098-0121 Institutional research plan: CEZ:AV0Z10100521 Key words : disordred-systems * impurity conduction * percolation Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.691, year: 2011 http://link.aps.org/doi/10.1103/PhysRevB.84.165304

  8. Control of Josephson current by Aharonov-Casher phase in a Rashba ring

    Czech Academy of Sciences Publication Activity Database

    Liu, X.; Borunda, M.F.; Liu, X.-J.; Sinova, Jairo

    2009-01-01

    Roč. 80, č. 17 (2009), 174524/1-174524/12 ISSN 1098-0121 Institutional research plan: CEZ:AV0Z10100521 Keywords : relativistic quantum transport * anomalous Hall effect * anisotropic magnetoresistance Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.475, year: 2009 http://link.aps.org/doi/10.1103/PhysRevB.80.174524

  9. Magnetic and electronic properties of NpCo.sub.2./sub.: Evidence for long-range magnetic order

    Czech Academy of Sciences Publication Activity Database

    Sanchez, J.-P.; Griveau, J.C.; Javorský, P.; Colineau, E.; Eloirdi, R.; Boulet, P.; Rebizant, J.; Wastin, F.; Shick, Alexander; Caciuffo, R.

    2013-01-01

    Roč. 87, č. 13 (2013), "134410-1"-"134410-7" ISSN 1098-0121 Institutional support: RVO:68378271 Keywords : magnetic properties * electronic structure Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.664, year: 2013 http://link. aps .org/doi/10.1103/PhysRevB.87.134410

  10. Final Report - DuraMelter 100 Tests to Support LAW Glass Formulation Correlation Development, VSL-06R6480-1, Rev. 0

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, Albert A.; Muller, I. S.; Gong, W.; Pegg, I. L.; Matlack, K. S.

    2013-12-03

    This report describes the results of work and testing specified by Test Specifications 24590-LAW-TSP-RT-04-004, Rev. 0, Test Plans VSL-05T5480-1, Rev. 0 and Text Exceptions 24590-LAW-TEF-RT-05-00002. The work and any associated testing followed established quality assurance requirements and was conducted as authorized. The descriptions provided in this test report are an accurate account of both the conduct of the work and the data collected. Results required by the Test Plan are reported. Also reported are any unusual or anomalous occurences that are different from the starting hypotheses. The test results and this report have been reviewed and verified.

  11. Administrative circular No.14 (Rev. 3) – Protection of members of the personnel against the financial consequences of illness, accident and incapacity for work

    CERN Multimedia

    2013-01-01

    Administrative Circular No. 14 (Rev. 3) entitled “Protection of members the personnel against the financial consequences of illness, accident and incapacity for work”, approved by the Director-General following discussion at the Standing Concertation Committee meeting of 19 April 2012 and entering into force on 1 January 2013, is available on the intranet site of the Human Resources Department.   This circular is applicable to all members of the personnel. It cancels and replaces Administrative Circular No. 14 (Rev. 2) entitled “Protection of members of the personnel against the financial consequences of illness, accident and disability” from July 2006. The circular was revised in order to improve the procedure before the Joint Advisory Rehabilitation and Disability Board (JARDB) and the management of long-term sick leave through a multidisciplinary approach launched upstream. The aim of this approach is to allow staff/fellows c...

  12. Administrative Circular No. 2 (Rev. 6) – Recruitment, appointment and possible developments regarding the contractual position of staff members (1 January 2015)

    CERN Multimedia

    2014-01-01

    Administrative Circular No. 2 (Rev. 6) entitled "Recruitment, appointment and possible developments regarding the contractual position of staff members", approved by the Director-General following discussion in the Standing Concertation Committee meeting on 27 November 2014 is available on the Human Resources Department website. It cancels and replaces Administrative Circular No. 2 (Rev. 5) entitled "Recruitment, appointment and possible developments regarding the contractual position of staff members" of September 2011. This circular was revised in order to improve the effectiveness of the career transition measures, in particular by expanding the scope of the programme to include also career transition within the Organization and by placing emphasis on career orientation and job search. Administrative Circular No. 2 will be further revised next year with the adoption of the new contract policy, subject to approval of the relevant amendments by all competent bodies. ...

  13. IMMUNE RESPONSES OF GOATS (SHAMI BREED TO VACCINATION WITH A FULL, REDUCED AND CONJUNCTIVAL DOSE OF BRUCEVAC (BRUCELLA MELITENSIS REV.1 VACCINE

    Directory of Open Access Journals (Sweden)

    F. ALDOMY, M. ALKHAWALDEH1 AND I. B. YOUNIS

    2009-10-01

    Full Text Available Three groups of Shami goats were randomly vaccinated with Brucevac (Rev. 1 vaccine. Group 1 was vaccinated subcutaneously with a full dose (1.54 x 109 organisms. Group 2 was vaccinated conjunctively with one eye drop (5.2 x 108 organisms, while Group 3 was injected subcutaneously with a reduced dose (7.1 x 105 organisms of vaccine. Blood samples were collected before vaccination, two, four, eight, 15 and 24 weeks post vaccination. All samples were tested through CFT, ELISA, SAT and Rose Bengal plate test. All serological tests used detected a higher percentage of vaccinated female kids with a full dose than they did in other groups vaccinated with a reduced dose or with a conjunctival dose of Rev.1 vaccine. The overall results suggested that 100% of animals vaccinated with a conjunctival dose became positive to CFT at two, four, eight and 15 weeks post vaccination, and then the percentage of seropositive animals declined and became 20% at 24 weeks post inoculation. The conjunctival route of vaccination significantly reduced the intensity and duration of the post vaccination serological response, which makes the use of this vaccine compatible with brucellosis programmes, even when these are based on a test-and–slaughter policy. The overall results showed that Shami goats responded to Rev.1 vaccine in the expected way. The majority of animals were seropositive to the CFT by two weeks after vaccination with higher numbers of seropositive animals in the kids group vaccinated with a full dose of Rev.1 vaccine.

  14. Vanishing Hall conductance in the phase-glass Bose metal at zero temperature

    Science.gov (United States)

    May-Mann, Julian; Phillips, Philip W.

    2018-01-01

    Motivated in part by numerical simulations [H. G. Katzgraber and A. P. Young, Phys. Rev. B 66, 224507 (2002), 10.1103/PhysRevB.66.224507; J. M. Kosterlitz and N. Akino, Phys. Rev. Lett. 81, 4672 (1998), 10.1103/PhysRevLett.81.4672; Phys. Rev. Lett. 81, 4672 (1998), 10.1103/PhysRevLett.81.4672] that reveal that the energy to create a defect in a gauge or phase glass scales as Lθ with θ power law as does the longitudinal conductance. This prediction can be verified experimentally by applying a ground plane to the 2D samples.

  15. Review report 2004. The Danish offshore wind farm demonstration project: Horns Rev and Nysted offshore wind farms. Environmental impact assessment and monitoring

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-10-15

    The present review report presents the two wind farms Horns Rev and Nysted with regard to environmental characteristics and the results of the environmental studies carried out in connection with the Environmental Impact Assessment (EIA) and the baseline and monitoring programmes at the two sites. The descriptions of the programmes are based on extracts from the individual annual reports. Detailed information on method, programmes and conclusions can be found in these reports (see Appendix 1). This review report is divided into two parts. The first part contains a description of the potential environmental impacts of offshore wind farms and the potentially affected part of the environment. The second part includes a description of Horns Rev and Nysted Offshore Wind Farm and the environmental studies carried out here until the end of 2003. Appendix I is a list of the literature published on the studies carried out at Horns Rev and Nysted Offshore Wind Farm. Appendix II is a list of some of the literature relevant to the demonstration projects but not directly related to the projects. The offshore wind farm situated in the Roedsand area is officially denoted Nysted Offshore Wind Farm, and in the present report the denotation 'Nysted' will be used as well when referring to Nysted Offshore Wind Farm. The denotation Roedsand will be used when referring to the actual area Roedsand. (au)

  16. Finanšu pārskata revīzija un tās gaita uzņēmumā SIA “X”

    OpenAIRE

    Pocjus, Evita

    2016-01-01

    Diplomdarba tēma: „Finanšu pārskata revīzija un tās gaita uzņēmumā SIA „X”” Finanšu pārskata revīzija ir būtiska, jo arī Latvijas Zvērināto revidentu asociācijas apkopotie statistikas dati norāda, ka Latvijā ~90% no pirmreizēji revidētiem uzņēmumiem tiek atklātas būtiskas neatbilstības grāmatvedības uzskaitē, tās atbilstībai LR likumiem un normatīviem aktiem, kā arī finanšu pārskata sagatavošanā. Finanšu pārskata revīzija ir nepieciešama katram uzņēmumam, kurš grib iegūt klientu un sadarbība...

  17. Review report 2003. The Danish offshore wind farm demonstration project: Horns Rev and Nysted offshore wind farms. Environmental impact assessment and monitoring

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-09-15

    The present review report presents the two wind farms Homs Rev and Nysted, with regard to environmental characteristics and the results of the environmental studies carried out in connection with the Environmental Impact Assessment (EIA) and the baseline and monitoring programmes at the two sites. The descriptions of the programmes are based on extracts from the individual annual reports. Detailed information on methods, programmes and conclusions can be found in these reports. This review report is divided into two parts. The first part contains a description of the potential environmentally impacts of offshore wind farms and the potentially affected part of the environment. The second part includes a description of Horns Rev and Nysted Offshore Wind Farm and the environmental studies carried out here until the end of 2003. Appendix I is a list of the literature published on the studies carried out at Hors Rev and Nysted Offshore Wind Farm. Appendix II is a list of some of the literature relevant to the demonstration projects but not directly related to the projects. The offshore wind farm situated at the bdsand area is officially denoted Nysted Offshore Wind Farm, and in the present report the denotation 'Nysted' will be used as well when referring to Nysted Offshore Wind Farm. The denotation Roedsand will be used when referring to the actual area Roedsand. (au)

  18. Review report 2004. The Danish offshore wind farm demonstration project: Horns Rev and Nysted offshore wind farms. Environmental impact assessment and monitoring

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-10-15

    The present review report presents the two wind farms Horns Rev and Nysted with regard to environmental characteristics and the results of the environmental studies carried out in connection with the Environmental Impact Assessment (EIA) and the baseline and monitoring programmes at the two sites. The descriptions of the programmes are based on extracts from the individual annual reports. Detailed information on method, programmes and conclusions can be found in these reports (see Appendix 1). This review report is divided into two parts. The first part contains a description of the potential environmental impacts of offshore wind farms and the potentially affected part of the environment. The second part includes a description of Horns Rev and Nysted Offshore Wind Farm and the environmental studies carried out here until the end of 2003. Appendix I is a list of the literature published on the studies carried out at Horns Rev and Nysted Offshore Wind Farm. Appendix II is a list of some of the literature relevant to the demonstration projects but not directly related to the projects. The offshore wind farm situated in the Roedsand area is officially denoted Nysted Offshore Wind Farm, and in the present report the denotation 'Nysted' will be used as well when referring to Nysted Offshore Wind Farm. The denotation Roedsand will be used when referring to the actual area Roedsand. (au)

  19. Solid residues; Os residuos solidos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This chapter gives a general overview on the general effects of the solid waste pollution, the principal pollutants emitted by the oil refineries, control actions for the solid waste emissions, the minimization actions, and the effluent treatment.

  20. Acoustics of solids

    CERN Document Server

    Beltzer, Abraham I

    1988-01-01

    Technological developments in composite materials, non-destructive testing, and signal processing as well as biomedical applications, have stimulated wide-ranging engineering investigations of heterogeneous, anisotropic media and surface waves of different types. Wave propagation in solids is now of considerable importance in a variety of applications. The book presents many of the key results in this field and interprets them from a unified engineering viewpoint. The conceptual importance and relevance for applications were the prevailing criteria in selecting the topics. Included are body and surface waves in elastic, viscoelastic, and piezoelectric media and waveguides, with emphasis on the effects of inhomogeneity and anisotropy. The book differs in many aspects from the other monographs dealing with wave propagation in solids. It focuses on physically meaningful theoretical models, a broad spectrum of which is covered, and not on mathematical techniques. Some of the results, particularly those dealing wi...

  1. Edge remap for solids

    Energy Technology Data Exchange (ETDEWEB)

    Kamm, James R.; Love, Edward; Robinson, Allen C; Young, Joseph G.; Ridzal, Denis

    2013-12-01

    We review the edge element formulation for describing the kinematics of hyperelastic solids. This approach is used to frame the problem of remapping the inverse deformation gradient for Arbitrary Lagrangian-Eulerian (ALE) simulations of solid dynamics. For hyperelastic materials, the stress state is completely determined by the deformation gradient, so remapping this quantity effectively updates the stress state of the material. A method, inspired by the constrained transport remap in electromagnetics, is reviewed, according to which the zero-curl constraint on the inverse deformation gradient is implicitly satisfied. Open issues related to the accuracy of this approach are identified. An optimization-based approach is implemented to enforce positivity of the determinant of the deformation gradient. The efficacy of this approach is illustrated with numerical examples.

  2. Thin Solid Oxide Cell

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention relates to a thin and in principle unsupported solid oxide cell, comprising at least a porous anode layer, an electrolyte layer and a porous cathode layer, wherein the anode layer and the cathode layer comprise an electrolyte material, at least one metal and a catalyst...... material, and wherein the overall thickness of the thin reversible cell is about 150 [mu]m or less, and to a method for producing same. The present invention also relates to a thin and in principle unsupported solid oxide cell, comprising at least a porous anode layer, an electrolyte layer and a porous...... cathode layer, wherein the anode layer and the cathode layer comprise an electrolyte material and a catalyst material, wherein the electrolyte material is doper zirconia, and wherein the overall thickness of the thin reversible cell is about 150 [mu]m or less, and to a method for producing same...

  3. Solid propellant impact tests

    International Nuclear Information System (INIS)

    Snow, E.C.

    1976-03-01

    Future space missions, as in the past, call for the continued use of radioisotopes as heat sources for thermoelectric power generators. In an effort to minimize the risk of radioactive contamination of the environment, a complete safety analysis of each such system is necessary. As a part of these analyses, the effects on such a system of a solid propellant fire environment resulting from a catastrophic launch pad abort must be considered. Several impact tests were conducted in which either a simulant MHW-FSA or a steel ball was dropped on the cold, unignited or the hot, burning surface of a block of UTP-3001 solid propellant. The rebound velocities were measured for both surface conditions of the propellant. The resulting coefficient of restitution, determined as the ratio of the components of the impact and rebound velocities perpendicular to the impact surface of the propellant, were not very dependent on whether the surface was cold or hot at the time of impact

  4. Diffusion in solids

    International Nuclear Information System (INIS)

    Tiwari, G.P.; Kale, G.B.; Patil, R.V.

    1999-01-01

    The article presents a brief survey of process of diffusion in solids. It is emphasised that the essence of diffusion is the mass transfer through the atomic jumps. To begin with formal equations for diffusion coefficient are presented. This is followed by discussions on mechanisms of diffusion. Except for solutes which form interstitial solid solution, diffusion in majority of cases is mediated through exchange of sites between an atom and its neighbouring vacancy. Various vacancy parameters such as activation volume, correlation factor, mass effect etc are discussed and their role in establishing the mode of diffusion is delineated. The contribution of dislocations and grain boundaries in diffusion process is brought out. The experimental determination of different types of diffusion coefficients are described. Finally, the pervasive nature of diffusion process in number of commercial processes is outlined to show the importance of diffusion studies in materials science and technology. (author)

  5. Solid phase extraction membrane

    Science.gov (United States)

    Carlson, Kurt C [Nashville, TN; Langer, Roger L [Hudson, WI

    2002-11-05

    A wet-laid, porous solid phase extraction sheet material that contains both active particles and binder and that possesses excellent wet strength is described. The binder is present in a relatively small amount while the particles are present in a relatively large amount. The sheet material is sufficiently strong and flexible so as to be pleatable so that, for example, it can be used in a cartridge device.

  6. Solid waste handling

    International Nuclear Information System (INIS)

    Parazin, R.J.

    1995-01-01

    This study presents estimates of the solid radioactive waste quantities that will be generated in the Separations, Low-Level Waste Vitrification and High-Level Waste Vitrification facilities, collectively called the Tank Waste Remediation System Treatment Complex, over the life of these facilities. This study then considers previous estimates from other 200 Area generators and compares alternative methods of handling (segregation, packaging, assaying, shipping, etc.)

  7. Solid state detector design

    International Nuclear Information System (INIS)

    Gunarwan Prayitno; Ahmad Rifai

    2010-01-01

    Much has been charged particle detector radiation detector made by the industry, especially those engaged in the development of detection equipment and components. The development and further research will be made solid state detector with silicon material. To be able to detect charged particles (radiation), required the processing of silicon material into the detector material. The method used to make silicon detector material is a lithium evaporations. Having formed an intrinsic region contactor installation process, and with testing. (author)

  8. Municipal Solid Waste Resources

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-06-01

    Municipal solid waste (MSW) is a source of biomass material that can be utilized for bioenergy production with minimal additional inputs. MSW resources include mixed commercial and residential garbage such as yard trimmings, paper and paperboard, plastics, rubber, leather, textiles, and food wastes. Waste resources such as landfill gas, mill residues, and waste grease are already being utilized for cost-effective renewable energy generation. MSW for bioenergy also represents an opportunity to divert greater volumes of residential and commercial waste from landfills.

  9. Determination of solid angle

    International Nuclear Information System (INIS)

    Qiu, S.; Amano, H.; Kasai, A.

    1988-01-01

    The solid angle in extended alpha source measurement for a series of counting geometries has been obtained by two methods: (1) calculated by means of the Nelson Blachmen series; (2) interpolated from the data table given by Gardner. A particular consequence of the application of the Nelson Blachmen series was deduced which was different from that given by the original author. The applicability of these two methods, as well as an experimentally measured method, is also evaluated. (author)

  10. Solid biomass barometer

    International Nuclear Information System (INIS)

    Anon.

    2009-01-01

    The economic and financial crisis has not brought solid biomass energy growth to a standstill. Primary energy production in the European Union member states increased in 2008 by 2,3%, which represents a gain of 1,5% million tonnes of oil equivalent over 2007. This growth was particularly marked in electricity production which increased output by 10,8% over 2007, an additional 5,6 TWh. (A.L.B.)

  11. Solid waste management: an overview

    International Nuclear Information System (INIS)

    Ayoub, G.M.

    1995-01-01

    The source, effect and characterization of solid wastes are discussed. Constituents of municipal solid wastes and a comparative compositions of municipal solid waste with some data on Lebanon are given. Collection, transport and processing practices are next introduced. Finally treatment and disposal techniques are presented with emphasis on the solid waste as energy source and as material source. Methods of recycling are evaluated in respect with their environmental impact. 7 refs. 2 tabs

  12. Solid waste study

    International Nuclear Information System (INIS)

    Ortiz, Paul G.

    1995-01-01

    The purpose of this document is to study the solid waste issues brought about by a Type C Investigation; ''Disposal of Inappropriate Material in the Los Alamos County Landfill'' (May 28, 1993). The study was completed in August 1995 by Coleman Research Corporation, under subcontract number 405810005-Y for Los Alamos National Laboratory (LANL). The study confirmed the issues identified in the Type C investigation, and also ascertained further issues or problems. During the course of this study two incidents involving hazardous waste resulted in the inappropriate disposal of the waste. An accidental spill, on June 8, 1995, at one of Laboratory buildings was not handled correctly, and ended up in the LAC Landfill. Hazardous waste was disposed of in a solid waste container and sent to the Los Alamos County Landfill. An attempt to locate the hazardous waste at the LAC Landfill was not successful. The second incident involving hazardous waste was discovered by the FSS-8, during a random dumpster surveillance. An interim dumpster program managed by FSS-8 discovered hazardous waste and copper chips in the solid waste, on August 9, 1995. The hazardous waste and copper chips would have been transported to the LAC Landfill if the audit team had not brought the problem to the awareness of the facility waste management personnel

  13. Conformal solids and holography

    Science.gov (United States)

    Esposito, A.; Garcia-Saenz, S.; Nicolis, A.; Penco, R.

    2017-12-01

    We argue that a SO( d) magnetic monopole in an asymptotically AdS space-time is dual to a d-dimensional strongly coupled system in a solid state. In light of this, it would be remiss of us not to dub such a field configuration solidon. In the presence of mixed boundary conditions, a solidon spontaneously breaks translations (among many other symmetries) and gives rise to Goldstone excitations on the boundary — the phonons of the solid. We derive the quadratic action for the boundary phonons in the probe limit and show that, when the mixed boundary conditions preserve conformal symmetry, the longitudinal and transverse sound speeds are related to each other as expected from effective field theory arguments. We then include backreaction and calculate the free energy of the solidon for a particular choice of mixed boundary conditions, corresponding to a relevant multi-trace deformation of the boundary theory. We find such free energy to be lower than that of thermal AdS. This suggests that our solidon undergoes a solid-to-liquid first order phase transition by melting into a Schwarzschild-AdS black hole as the temperature is raised.

  14. Volatiles from solids

    Energy Technology Data Exchange (ETDEWEB)

    Loughrey, C T

    1939-08-24

    To remove volatiles from solids, such as oil shale, gases, and/or vapours are passed through a mass of the materials, the vapours and gases separated, and the vapours condensed. The volatile-containing solid materials are fed to a retort, and a shaft is driven to rotate an impeller so as to displace the liquid and create a vortex tube, which draws in gas from the atmosphere through an intake, twyer, interstices in the material in the retort, a conduit, chamber, tubes, another chamber and cylinder. This gas is carried outwardly and upwardly by the vortices in the liquid and is carried to discharge through three conduits. The vapours entrained by the gas are part condensed in the liquid and the remainder directed to a condenser. Steam may be delivered to the twyer through a nozzle of a pipe, with or without air, and combustible hydrocarbon fuel may be fed through the burner nozzle or solid fuel may be directed from feeder and combusted in the twyer.

  15. Solid state magnetism

    CERN Document Server

    Crangle, John

    1991-01-01

    Solid state magnetism is important and attempts to understand magnetic properties have led to an increasingly deep insight into the fundamental make up of solids. Both experimental and theoretical research into magnetism continue to be very active, yet there is still much ground to cover before there can be a full understanding. There is a strong interplay between the developments of materials science and of magnetism. Hundreds of new materials have been dis­ covered, often with previously unobserved and puzzling magnetic prop­ erties. A large and growing technology exists that is based on the magnetic properties of materials. Very many devices used in everyday life involve magnetism and new applications are being invented all the time. Under­ standing the fundamental background to the applications is vital to using and developing them. The aim of this book is to provide a simple, up-to-date introduction to the study of solid state magnetism, both intrinsic and technical. It is designed to meet the needs a...

  16. Handling of Solid Residues

    International Nuclear Information System (INIS)

    Medina Bermudez, Clara Ines

    1999-01-01

    The topic of solid residues is specifically of great interest and concern for the authorities, institutions and community that identify in them a true threat against the human health and the atmosphere in the related with the aesthetic deterioration of the urban centers and of the natural landscape; in the proliferation of vectorial transmitters of illnesses and the effect on the biodiversity. Inside the wide spectrum of topics that they keep relationship with the environmental protection, the inadequate handling of solid residues and residues dangerous squatter an important line in the definition of political and practical environmentally sustainable. The industrial development and the population's growth have originated a continuous increase in the production of solid residues; of equal it forms, their composition day after day is more heterogeneous. The base for the good handling includes the appropriate intervention of the different stages of an integral administration of residues, which include the separation in the source, the gathering, the handling, the use, treatment, final disposition and the institutional organization of the administration. The topic of the dangerous residues generates more expectation. These residues understand from those of pathogen type that are generated in the establishments of health that of hospital attention, until those of combustible, inflammable type, explosive, radio-active, volatile, corrosive, reagent or toxic, associated to numerous industrial processes, common in our countries in development

  17. SOLID WASTE STUDY

    Energy Technology Data Exchange (ETDEWEB)

    PAUL G. ORTIZ - COLEMAN RESEARCH CORP/COMPA INDUSTRIES

    1995-08-01

    The purpose of this document is to study the solid waste issues brought about by a Type C Investigation; ``Disposal of Inappropriate Material in the Los Alamos County Landfill'' (May 28, 1993). The study was completed in August 1995 by Coleman Research Corporation, under subcontract number 405810005-Y for Los Alamos National Laboratory (LANL). The study confirmed the issues identified in the Type C investigation, and also ascertained further issues or problems. During the course of this study two incidents involving hazardous waste resulted in the inappropriate disposal of the waste. An accidental spill, on June 8, 1995, at one of Laboratory buildings was not handled correctly, and ended up in the LAC Landfill. Hazardous waste was disposed of in a solid waste container and sent to the Los Alamos County Landfill. An attempt to locate the hazardous waste at the LAC Landfill was not successful. The second incident involving hazardous waste was discovered by the FSS-8, during a random dumpster surveillance. An interim dumpster program managed by FSS-8 discovered hazardous waste and copper chips in the solid waste, on August 9, 1995. The hazardous waste and copper chips would have been transported to the LAC Landfill if the audit team had not brought the problem to the awareness of the facility waste management personnel.

  18. Situation analysis of physical independence of the equipment and safety circuits of Almaraz NPP regarding R.G. 1.75 rev.3 (2005); Analisis de la situacion de la independencia fisica de los equipos y circuitos electricos de seguridad de C. N. Almaraz respecto a la R. G. 1.75 rev 3 (2005)

    Energy Technology Data Exchange (ETDEWEB)

    Seijas Portela, S.

    2010-07-01

    Situation analysis of physical independence of the electrical equipment and circuits CN safety Almaraz about R.G. 1.75 rev. 3. (2005) The aim of this paper is to present the work done in the analysis of the physical separation of redundant safety electrical equipment (emergency diesel generators, medium voltage, electrical cabinets, etc.) and physical separation of circuits and electrical conduits.

  19. Infrared Spectroscopy of HNO and Noh Suspended in Solid Parahydrogen

    Science.gov (United States)

    Anderson, David T.; Ruzi, Mahmut

    2013-06-01

    The only report in the literature on the infrared spectroscopy of the parent oxynitrene NOH was performed using Ar matrix isolation spectroscopy at 10 K. In this previous study, the NOH is synthesized by co-deposition of NO/Ar and a H_2/Ar mixture that is passed through a microwave discharge to create H-atoms. The H-atoms recombine with NO in the Ar matrix to produce mostly HNO, but some NOH is produced as well. In this work we irradiate NO doped parahydrogen solids at 2 K using 193 nm radiation which is known to generate H-atoms as by-products. After the photolysis laser is stopped, we detect growth of HNO and NOH presumably due to reactions of H-atoms with NO analogous to the previous Ar matrix study. The higher energy NOH isomer is predicted by high-level calculations to be in a triplet ground electronic state. Interestingly, the infrared absorptions of NOH for the two observed vibrational modes (bend and OH stretch) display fine structure; an intense central peak with smaller peaks spaced symmetrically to both lower and higher wavenumbers. Further, the spacing between the peaks is the same for both vibrational modes. We believe this fine structure reflects the zero-field splitting of the triplet ground state of NOH (magnetic dipole-dipole interaction) and our most current results and analysis will be presented. G. Maier, H. P. Reisenauer, M. De Marco, Angew. Chem. Int. Ed. 38, 108-110 (1999). M. Fushitani and T. Momose, Low Temp. Phys. 29, 740-743 (2003). U. Bozkaya, J. M. Turney, Y. Yamaguchi, and H. F. Schaefer III, J. Chem. Phys. 136, 164303 (2012).

  20. Solid targetry for compact cyclotrons

    International Nuclear Information System (INIS)

    Comor, J.

    2004-01-01

    In this presentation authors present experimental results of solid targetry for compact cyclotrons. It is concluded: Solid targetry is not restricted to large accelerator centers anymore; Small and medium scale radioisotope production is feasible with compact cyclotrons; The availability of versatile solid target systems is expected to boost the radiochemistry of 'exotic' positron emitters

  1. Separation of oils from solids

    International Nuclear Information System (INIS)

    Van Slyke, D.C.

    1992-01-01

    This patent describes a method for cleaning oil-contaminated particulate solids. It comprises: contacting contaminated solids with a non-aqueous liquid composition comprising a carboxylic acid; then contacting the solids with an aqueous wash containing a reagent for converting the carboxylic acid to a water-soluble carboxylate salt; and removing an aqueous phase containing carboxylate salt and entrained oil

  2. Solid waste containing method and solid waste container

    International Nuclear Information System (INIS)

    Sawai, Takeshi.

    1997-01-01

    Solid wastes are filled in a sealed vessel, and support spacers are inserted to the gap between the inner wall of a vessel main body and the solid wastes. The solid wastes comprise shorn pieces (crushed pieces) of spent fuel rod cladding tubes, radioactively contaminated metal pieces and miscellaneous solids pressed into a disk-like shape. The sealed vessel comprises, for example, a stainless steel. The solid wastes are filled while being stacked in a plurality of stages. A solidifying filler is filled into the gap between the inner wall and the solid wastes in the vessel main body by way of an upper opening, and the upper opening is closed by a closing lid to provide an entirely sealed state. Alumina particles having high heat conductivity and excellent heat durability are used for the solid filler. It is preferable to fill an inert gas such as a dried nitrogen gas in the sealed vessel. (I.N.)

  3. Elsam. Offshore Wind Farm. Horns Rev. Annual status report for the environmental monitoring programme 1. January 2002 - 31. December 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-04-15

    This annual report, which is a baseline and/or an evaluation of the effects of construction phase, is based on extracts from our consultants' annual reports. These annual reports are individual reports, in which surveys have been made during the year 2002 and reported in the beginning of 2003. Detailed information on methods, programmes and conclusions can be found in these reports. In general it should be noted that apparently the construction phase has not had any unintended effects on the parameters surveyed. Therefore we can also conclude that the protective measures established by Elsam, especially scaring devices/ramp-ups for marine mammals, have had the intended effect. Especially interesting parameters that should be mentioned are: Birds: The seagull species 'Herring Gulls' was found to be attracted by the wind farm during the construction period. The number of Divers has decreased, however statistically this decrease is very small as very few Divers have been observed under the baseline. Porpoises: Porpoises generally stayed away from the construction area during pile driving. This effect was intended and scaring devices were deployed in order to ensure that the animals' hearing was not permanently damaged. Seals: The purpose of the programme has not been to show statistically significant effects during the construction phase. The purpose was to get an idea of their behaviour during the construction phase within the wind farm as well as on the reef. It has been concluded that Horns Rev is not used as a foraging area as much as expected. It is used as transit area for bigger foraging sites in the North Sea. Sand eels and Spisula: A baseline survey of sand eels within the wind farm area has been made. It is shown that sand eels are found in the wind farm area. Spisula have been found in the wind farm area but not in the amount expected. Hard substrate habitat: Baseline surveys on fish have been made during the spring of 2002. The

  4. Elsam. Offshore Wind Farm. Horns Rev. Annual status report for the environmental monitoring programme 1. January 2002 - 31. December 2002

    International Nuclear Information System (INIS)

    2003-04-01

    This annual report, which is a baseline and/or an evaluation of the effects of construction phase, is based on extracts from our consultants' annual reports. These annual reports are individual reports, in which surveys have been made during the year 2002 and reported in the beginning of 2003. Detailed information on methods, programmes and conclusions can be found in these reports. In general it should be noted that apparently the construction phase has not had any unintended effects on the parameters surveyed. Therefore we can also conclude that the protective measures established by Elsam, especially scaring devices/ramp-ups for marine mammals, have had the intended effect. Especially interesting parameters that should be mentioned are: Birds: The seagull species 'Herring Gulls' was found to be attracted by the wind farm during the construction period. The number of Divers has decreased, however statistically this decrease is very small as very few Divers have been observed under the baseline. Porpoises: Porpoises generally stayed away from the construction area during pile driving. This effect was intended and scaring devices were deployed in order to ensure that the animals' hearing was not permanently damaged. Seals: The purpose of the programme has not been to show statistically significant effects during the construction phase. The purpose was to get an idea of their behaviour during the construction phase within the wind farm as well as on the reef. It has been concluded that Horns Rev is not used as a foraging area as much as expected. It is used as transit area for bigger foraging sites in the North Sea. Sand eels and Spisula: A baseline survey of sand eels within the wind farm area has been made. It is shown that sand eels are found in the wind farm area. Spisula have been found in the wind farm area but not in the amount expected. Hard substrate habitat: Baseline surveys on fish have been made during the spring of 2002. The programme regarding the

  5. Experimental determination of order in non-equilibrium solids using colloidal gels

    International Nuclear Information System (INIS)

    Gao Yongxiang; Kilfoil, Maria

    2004-01-01

    The idea of quantifying order in disordered systems has been introduced recently by Torquato and co-workers (2000 Phys. Rev. E 62 993-1001). We are interested in the application of this idea to measure structure in non-equilibrium systems. Here we focus on gels, using as a model system colloidal gels formed from hard spheres with polymer added to the systems to induce a controlled, weak attraction. To describe the structure of the gels we use real space imaging via confocal microscopy to obtain the full three-dimensional structure. We measure experimentally both translational order and bond angle correlations, defining a new (refined) translational order parameter that is sensitive to long range order in these non-random packings. This metric is also sensitive to anisotropy, which should be important in the many physical situations where an external force is present. The bond angle distribution shows coordinated organization. To give a clearer physical picture for gels, we compare the experimental data to computer generated hard sphere systems

  6. Comment on: Measurement of the force exerted on the surface of an object immersed in a plasma. Eur. Phys. J. D 69: 91 (2015), DOI: 10.1140/epjd/e2015-50743-2

    Science.gov (United States)

    Czarnetzki, Uwe; Tsankov, Tsanko V.

    2015-10-01

    Surfaces exposed to a plasma experience a certain pressure that pushes them away from the volume. This effect has been investigated experimentally in a recent article by Thomas Trottenberg, Thomas Richter, and Holger Kersten from Kiel University/Germany [Eur. Phys. J. D 69, 91 (2015)]. The experimental results are impressive and have actually drawn the attention of the community to an interesting question which so far has been largely ignored. In addition to their experimental results the Kiel group proposes also a rough concept in order to explain their findings which provides certainly a basic qualitative understanding of the physical processes involved. However, on a closer inspection the picture developed so far is not entirely satisfying and the problem seems to require a more fundamental approach. This comment shows that the effect of the wall pressure can be described exactly using only analytical methods. The physical situation is analyzed by three different approaches. First, the simple case of only one spatial dimension is presented in detail. Second, the case of spherical symmetry is analyzed by some simplifying assumptions in order to investigate the effect of higher dimensionality. Third, a formal derivation for arbitrary geometry is given. This general result includes the one-dimensional case but does not allow a convenient connection between the pressures at the wall and in the center. Finally, the results are summarized and some conclusions are drawn.

  7. Analysis of mutagenic DNA repair in a thermoconditional mutant of Saccharomyces cerevisiae. IV. Influence of DNA replication and excision repair on REV2 dependent UV-mutagenesis and repair

    Energy Technology Data Exchange (ETDEWEB)

    Siede, W.; Eckardt, F.

    1986-01-01

    A double mutant being thermoconditionally defective in mutation induction as well as in repair of pre-lethal UV-induced DNA damage (rev2ts) and deficient in excision repair (rad3-2) was studied in temperature-shift experiments. The influence of inhibitors of DNA replication (hydroxyurea, aphidicolin) was determined. Additionally, an analysis of the dose-response pattern of mutation induction (mutation kinetics) at several ochre alleles was carried out. It was concluded that the UV-inducible REV2 dependent mutagenic repair process is not induced in excision-deficient cells. In excision-deficient cells, REV2 dependent mutation fixation is slow and mostly post-replicative though not dependent on DNA replication. The REV2 mediated mutagenic process could be separated from the repair function.

  8. Mr Huidong LI Deputy Chairman and Secretary-General, Rev. Committee of Chinese Nationalist Party Vice President, Sun Yat-Sen Culture Interchange Association of China Member, Committee for Internal and Judicial Affairs of the National People's Congress of China

    CERN Multimedia

    Bennett, Sophia Elizabeth

    2017-01-01

    Mr Huidong LI Deputy Chairman and Secretary-General, Rev. Committee of Chinese Nationalist Party Vice President, Sun Yat-Sen Culture Interchange Association of China Member, Committee for Internal and Judicial Affairs of the National People's Congress of China

  9. Grate Pallet 8232 (GP-8232) Vehicle Pallet, Evaluation Tests MIL-STD-1660, "Design Criteria for Ammunition Unit Loads" and TP-94-01 (REV 1), "Transportability Testing Procedures"

    National Research Council Canada - National Science Library

    Barickman, Philip

    2003-01-01

    .... The testing was conducted for informational purposes only. The GP-8232 Vehicle Pallet was evaluated by the testing procedures set forth in MIL-STD-1660 and TP-94-01 (Rev. 1) testing procedures...

  10. Solid state physics

    CERN Document Server

    Burns, Gerald

    2013-01-01

    The objective of Solid State Physics is to introduce college seniors and first-year graduate students in physics, electrical engineering, materials science, chemistry, and related areas to this diverse and fascinating field. I have attempted to present this complex subject matter in a coherent, integrated manner, emphasizing fundamental scientific ideas to give the student a strong understanding and ""feel"" for the physics and the orders of magnitude involved. The subject is varied, covering many important, sophisticated, and practical areas, which, at first, may appear unrelated but which ar

  11. Injector of solid indicator

    Energy Technology Data Exchange (ETDEWEB)

    Chernyshev, G.I.; Luk' yanov, E.P.; Pruslin, Y.A.; Zabrodin, P.I.

    1981-04-25

    The injector can be used with remote introduction of indicators into a borehole for study in an oil well of the parameters of movement of fluid currents, control of the state of the equipment, and study of the properties of the rocks. Proposed is a method of increasing the reliability of operation of the injector by stabilizing the rate of its dispersing. Introduced to the injector of a solid indicator are auxiliary brackets and a cathode made from nonmetallic electrical conducting material and reinforced at the end by an elastic bracket. The auxillary cathode is attached to the end surface of the anode and cathode.

  12. Atomic mechanics of solids

    CERN Document Server

    MacPherson, A K

    1990-01-01

    This volume brings together some of the presently available theoretical techniques which will be useful in the design of solid-state materials. At present, it is impossible to specify the atomic composition of a material and its macroscopic physical properties. However, the future possibilities for such a science are being laid today. This is coming about due to the development of fast, cheap computers which will be able to undertake the calculations which are necessary.Since this field of science is fairly new, it is not yet quite clear which direction of analysis will eventually prov

  13. Solid state physics

    CERN Document Server

    Grosso, Giuseppe

    2013-01-01

    Solid State Physics is a textbook for students of physics, material science, chemistry, and engineering. It is the state-of-the-art presentation of the theoretical foundations and application of the quantum structure of matter and materials. This second edition provides timely coverage of the most important scientific breakthroughs of the last decade (especially in low-dimensional systems and quantum transport). It helps build readers' understanding of the newest advances in condensed matter physics with rigorous yet clear mathematics. Examples are an integral part of the text, carefully de

  14. Physics of solids

    CERN Document Server

    Ketterson, John B

    2016-01-01

    This comprehensive text covers the basic physics of the solid state starting at an elementary level suitable for undergraduates but then advancing, in stages, to a graduate and advanced graduate level. In addition to treating the fundamental elastic, electrical, thermal, magnetic, structural, electronic, transport, optical, mechanical and compositional properties, we also discuss topics like superfluidity and superconductivity along with special topics such as strongly correlated systems, high-temperature superconductors, the quantum Hall effects, and graphene. Particular emphasis is given to so-called first principles calculations utilizing modern density functional theory which for many systems now allow accurate calculations of the electronic, magnetic, and thermal properties.

  15. Contacting solids and liquids

    International Nuclear Information System (INIS)

    Robinson, L.F.

    1980-01-01

    A solids/liquid (or slurry/liquid) contactor is described comprising a container through which the phases flow, rotatable discs with a rotor dividing the container into a series of interconnected compartments and, in at least some of the compartments, receptacles extending between the discs to effect phase transfer. At least one of the compartments is free of receptacles or has receptacles arranged on a smaller diameter than in other compartments to form a settling chamber. The contactor may be used in the extraction of oil-sands or uranium or purification of china clay. (author)

  16. Advanced solid state batteries

    Energy Technology Data Exchange (ETDEWEB)

    Levasseur, A; Delmas, C; Menetrier, M; Hagenmuller, P

    1984-01-01

    Direct electrochemical storage of electricity is attractive because of its adaptability to vehicle traction as well as to stationary applications. Important advancements are necessary to improve primary or secondary batteries so far used. The aim of this study was to develop and to characterize materials for the next generation of advanced, rechargeable solid state batteries for vehicle transport and stationary storage applications. One of the best electricity storage systems was the lithium/intercalation compound secondary battery, though up to now the behavior of liquid organic electrolytes did not allow for good recycling in such systems. The research program for these batteries is described.

  17. Solid state optical microscope

    Science.gov (United States)

    Young, Ian T.

    1983-01-01

    A solid state optical microscope wherein wide-field and high-resolution images of an object are produced at a rapid rate by utilizing conventional optics with a charge-coupled photodiode array. A galvanometer scanning mirror, for scanning in one of two orthogonal directions is provided, while the charge-coupled photodiode array scans in the other orthogonal direction. Illumination light from the object is incident upon the photodiodes, creating packets of electrons (signals) which are representative of the illuminated object. The signals are then processed, stored in a memory, and finally displayed as a video signal.

  18. Hopping transport in solids

    CERN Document Server

    Pollak, M

    1991-01-01

    The hopping process, which differs substantially from conventional transport processes in crystals, is the central process in the transport phenomena discussed in this book. Throughout the book the term ``hopping'' is defined as the inelastic tunneling transfer of an electron between two localized electronic states centered at different locations. Such processes do not occur in conventional electronic transport in solids, since localized states are not compatible with the translational symmetry of crystals.The rapid growth of interest in hopping transport has followed in the footsteps of the

  19. Solid state mechanics

    International Nuclear Information System (INIS)

    Habib, P.

    1988-01-01

    The 1988 progress report of the Solid State Mechanics laboratory (Polytechnic School, France) is presented. The research program domains are the following: investigations concerning the stability and bifurcation of the reversible or irreversible mechanical systems, the problems related to the theoretical and experimental determination of the materials rheological properties, the fatigue crack formation and propagation in multiple-axial stress conditions, the expert systems, and the software applied in the reinforced earth structures dimensioning. Moreover, the published papers, the books, the congress communications, the thesis, and the patents are listed [fr

  20. Solid phase transformations

    CERN Document Server

    Čermák, J

    2008-01-01

    This special-topic book, devoted to ""Solid Phase Transformations"" , covers a broad range of phenomena which are of importance in a number of technological processes. Most commercial alloys undergo thermal treatment after casting, with the aim of imparting desired compositions and/or optimal morphologies to the component phases. In spite of the fact that the topic has lain at the center of physical metallurgy for a long time, there are numerous aspects which are wide open to potential investigative breakthroughs. Materials with new structures also stimulate research in the field, as well as n

  1. The role of hRev7, the accessory subunit of hPolζ, in translesion synthesis past DNA damage induced by benzo[a]pyrene diol epoxide (BPDE

    Directory of Open Access Journals (Sweden)

    Maher Veronica M

    2010-12-01

    Full Text Available Abstract Background DNA polymerase zeta (Polζ is a specialized DNA polymerase that, unlike classical replicative polymerases, is capable of replicating past DNA lesions, i.e. of performing translesion synthesis (TLS. The catalytic subunit of hPolζ, hRev3, has been shown to play a critical role in DNA damage-induced mutagenesis in human cells, but less is known about the role of hRev7, the accessory subunit of hPolζ, in such mutagenesis. To address this question, we recently generated human fibroblasts with very significantly reduced levels of hRev7 protein and demonstrated that hRev7 is required to protect cells from ultraviolet(254 nm (UV radiation-induced cytotoxicity and mutagenesis (McNally et al., DNA Repair 7 (2008 597-604. The goal of the present study was to determine whether hRev7 is similarly involved in the tolerance of DNA damage induced by benzo[a]pyrene diol epoxide (BPDE, the reactive form of the widespread environmental carcinogen benzo[a]pyrene. Methods To determine whether hRev7 also plays a role in protecting human cells from the cytotoxicity and mutagenesis induced by benzo[a]pyrene diol epoxide (BPDE, cell strains with reduced hRev7 were compared to their parental strain and a vector control strain for the effect of BPDE on cell survival, induction of mutations, and the ability to progress through the cell cycle. Results The results show that cell strains with reduced hRev7 are more sensitive to the cytotoxic effect of BPDE than the control strains, and progress through S-phase at a slower rate than the control cells following BPDE treatment, indicating that hRev7, and likely hPolζ, is required for efficient bypass of BPDE-induced DNA lesions. However, neither the frequency nor kinds of mutations induced by BPDE in cells with reduced hRev7 differ significantly from those induced in the control strains, suggesting that hPolζ is not essential for inserting nucleotides opposite BPDE-induced DNA damage. Conclusions Taken

  2. Solid substrate fermentation

    Energy Technology Data Exchange (ETDEWEB)

    Tengerdy, R P

    1985-04-01

    Solid Substrate Fermentation (SSF) describes the microbiological tranformation of biological materials in their natural state, in contrast with liquid or submerged fermentations which are carried out in dilute solutions or slurries. The most important industrial microorganisms used in SSF are filamentous fungi and the critical factors in their growth are the control of the moisture level and the temperature. Traditionally, most SSFs are conducted in shallow trays (so that heat build up is avoided) and stacked in a moist chamber, however, the modern SSF should be able to mix large amounts of substrate for a uniform fermentation, maximum automization scale-up of the process, continuous operation and fermentation control and a promising new design is the Helical screw fermenter. At the present time SSF is used in the production of foods (e.g. mushrooms and oriental foods) in municipal, agricultural and industrial solid waste disposal and in the production of enzymes and speciality chemicals but it does not seem likely that it will replace prevalent liquid fermentation technologies. 29 references.

  3. Solid-phase spectrophotometry

    International Nuclear Information System (INIS)

    Brykina, G.D.; Marchenko, D.Yu.; Shpigun, O.A.

    1995-01-01

    Solid-phase spectrophotometry (SPS), which is based on the direct measurement of light absorption of an ion exchanger containing a substance of interest, was reviewed. Since 1976, it has been known that aborbance of an ion exchanger is directly proportional to the concentration of a particular ion in solution. A similar dependence can also be followed for other sorbents, as well as for foams, membranes, films, etc., which do not exhibit ion exchange properties. One can use absorption, diffuse reflection, and luminescence spectra parameters as an analytical signal. Thus, SPS of ion exchangers is among the analytical techniques that combine the sorption concentration and surface determination of the substance of interest. This review summarizes the advancements in SPS over the last six years and demonstrates the prospects for its development. Special attention is paid to experimental methods for measuring solid-phase absorption and to the basic procedures of sample preparation, including new ones. These two facets are of great importance for obtaining precise results and extending the capabilities of SPS

  4. Solid biomass barometer

    International Nuclear Information System (INIS)

    Anon.

    2011-01-01

    The primary energy production from solid biomass in the European Union reached 79.3 Mtoe in 2010 which implies a growth rate of 8% between 2009 and 2010. The trend, which was driven deeper by Europe's particularly cold winter of 2009-2010, demonstrates that the economic down-turn failed to weaken the member states' efforts to structure the solid biomass sector. Heat consumption rose sharply: the volume of heat sold by heating networks increased by 18% and reached 6.7 Mtoe and if we consider the total heat consumption (it means with and without recovery via heating networks) the figure is 66 Mtoe in 2010, which amounts to 10.1% growth. The growth of electricity production continued through 2010 (8.3% up on 2009) and rose to 67 TWh but at a slower pace than in 2009 (when it rose by 11.3% on 2008). The situation of the main producer countries: Sweden, Finland, Germany and France is reviewed. It appears that cogeneration unit manufacturers and biomass power plant constructors are the main beneficiaries of the current biomass energy sector boom. There is a trend to replace coal-fired plants that are either obsolete or near their end of life with biomass or multi-fuel plants. These opportunities will enable the industry to develop and further exploit new technologies such as gasification, pyrolysis and torrefaction which will enable biomass to be turned into bio-coal. (A.C.)

  5. III-Nitride, SiC and Diamond Materials for Electronic Devices. Symposium Held April 8-12 1996, San Francisco, California, U.S.A. Volume 423.

    Science.gov (United States)

    1996-12-01

    Haustein , J. J. Song, and B. Goldenberg, Appl. Phys. Lett. 66, 3492 (1995). 11. Y. Koide, H. Itoh, M. R. Khan, K. Hiramtu, N. Sawaki, and 1. Akasaki, J...12]. Herman Lock and Gary E. Maciel, J. Mater. Res. 7 (10), 2791-7 (1992). [13]. M. Hoinkis, E. D. Tober, R. L. White etal., Appl. Phys. Lett. 61...Chem. Solids, 25, 1369 (1964). [2] L.Kleinman and J. C. Phillips, Phys. Rev. 116, 880 (1959); F. Herman , idid. 93, 1214 (1954). [3] L.Kleinman and J

  6. Anisotropic generalization of Stinchcombe's solution for the conductivity of random resistor networks on a Bethe lattice

    Science.gov (United States)

    Semeriyanov, F.; Saphiannikova, M.; Heinrich, G.

    2009-11-01

    Our study is based on the work of Stinchcombe (1974 J. Phys. C: Solid State Phys. 7 179) and is devoted to the calculations of average conductivity of random resistor networks placed on an anisotropic Bethe lattice. The structure of the Bethe lattice is assumed to represent the normal directions of the regular lattice. We calculate the anisotropic conductivity as an expansion in powers of the inverse coordination number of the Bethe lattice. The expansion terms retained deliver an accurate approximation of the conductivity at resistor concentrations above the percolation threshold. We make a comparison of our analytical results with those of Bernasconi (1974 Phys. Rev. B 9 4575) for the regular lattice.

  7. Anisotropic generalization of Stinchcombe's solution for the conductivity of random resistor networks on a Bethe lattice

    International Nuclear Information System (INIS)

    Semeriyanov, F; Saphiannikova, M; Heinrich, G

    2009-01-01

    Our study is based on the work of Stinchcombe (1974 J. Phys. C: Solid State Phys. 7 179) and is devoted to the calculations of average conductivity of random resistor networks placed on an anisotropic Bethe lattice. The structure of the Bethe lattice is assumed to represent the normal directions of the regular lattice. We calculate the anisotropic conductivity as an expansion in powers of the inverse coordination number of the Bethe lattice. The expansion terms retained deliver an accurate approximation of the conductivity at resistor concentrations above the percolation threshold. We make a comparison of our analytical results with those of Bernasconi (1974 Phys. Rev. B 9 4575) for the regular lattice.

  8. Anisotropic generalization of Stinchcombe's solution for the conductivity of random resistor networks on a Bethe lattice

    Energy Technology Data Exchange (ETDEWEB)

    Semeriyanov, F; Saphiannikova, M; Heinrich, G [Leibniz Institute of Polymer Research Dresden, Hohe str. 6, 01069 Dresden (Germany)], E-mail: fsemeriyanov@yahoo.de

    2009-11-20

    Our study is based on the work of Stinchcombe (1974 J. Phys. C: Solid State Phys. 7 179) and is devoted to the calculations of average conductivity of random resistor networks placed on an anisotropic Bethe lattice. The structure of the Bethe lattice is assumed to represent the normal directions of the regular lattice. We calculate the anisotropic conductivity as an expansion in powers of the inverse coordination number of the Bethe lattice. The expansion terms retained deliver an accurate approximation of the conductivity at resistor concentrations above the percolation threshold. We make a comparison of our analytical results with those of Bernasconi (1974 Phys. Rev. B 9 4575) for the regular lattice.

  9. Codon optimization of the HIV-1 vpu and vif genes stabilizes their mRNA and allows for highly efficient Rev-independent expression

    International Nuclear Information System (INIS)

    Nguyen, Kim-Lien; Llano, Manuel; Akari, Hirofumi; Miyagi, Eri; Poeschla, Eric M.; Strebel, Klaus; Bour, Stephan

    2004-01-01

    Two HIV-1 accessory proteins, Vpu and Vif, are notoriously difficult to express autonomously in the absence of the viral Tat and Rev proteins. We examined whether the codon bias observed in the vpu and vif genes relative to highly expressed human genes contributes to the Rev dependence and low expression level outside the context of the viral genome. The entire vpu gene as well as the 5' half of the vif gene were codon optimized and the resulting open reading frames (ORFs) (vphu and hvif, respectively) were cloned in autonomous expression vectors under the transcriptional control of the CMV promoter. Codon optimization efficiently removed the expression block observed in the native genes and allowed high levels of Rev- and Tat-independent expression of Vpu and Vif. Most of the higher protein levels detected are accounted for by enhanced steady-state levels of the mRNA encoding the optimized species. Nuclear run-on experiments show for the first time that codon optimization has no effect on the rate of transcriptional initiation or elongation of the vphu mRNA. Instead, optimization of the vpu gene was found to stabilize the vphu mRNA in the nucleus and enhance its export to the cytoplasm. This was achieved by allowing the optimized mRNA to use a new CRM1-independent nuclear export pathway. This work provides a better understanding of the molecular mechanisms underlying the process of codon optimization and introduces novel tools to study the biological functions of the Vpu and Vif proteins independently of other viral proteins

  10. Characterization of an internal ribosomal entry segment within the 5' leader of avian reticuloendotheliosis virus type A RNA and development of novel MLV-REV-based retroviral vectors.

    Science.gov (United States)

    López-Lastra, M; Gabus, C; Darlix, J L

    1997-11-01

    The murine leukemia virus (MLV)-related type C viruses constitute a major class of retroviruses that includes numerous endogenous and exogenous mammalian viruses and the related avian spleen necrosis virus (SNV). The MLV-related viruses possess a long and multifunctional 5' untranslated leader involved in key steps of the viral life cycle--splicing, translation, RNA dimerization, encapsidation, and reverse transcription. Recent studies have shown that the 5' leader of Friend murine leukemia virus and Moloney murine leukemia virus can direct cap independent translation of gag precursor proteins (Berlioz et al., 1995; Vagner et al., 1995b). These data, together with structural homology studies (Koning et al., 1992), prompted us to undertake a search for new internal ribosome entry segment (IRES) of retroviral origin. Here we describe an IRES element within the 5' leader of avian reticuloendotheliosis virus type A (REV-A) genomic RNA. Data show that the REV-A 5' IRES element maps downstream of the packaging/dimerization (E/DLS) sequence (Watanabe and Temin, 1982; Darlix et al., 1992) and the minimal IRES sequence appears to be within a 129 nt fragment (nucleotides 452-580) of the 5' leader, immediately upstream of the gag AUG codon. The REV-A IRES has been successfully utilized in the construction of novel high titer MLV-based retroviral vectors, containing one or more IRES elements of retroviral origin. These retroviral constructs, which represent a starting point for the design of novel vectors suitable for gene therapy, are also of interest as a model system of internal translation initiation and its possible regulation during development, cancer, or virus infection.

  11. Base-line investigations of birds in relation to an offshore wind farm at Horns Rev, and results from the year of construction

    International Nuclear Information System (INIS)

    Kjaer Christensen, T.; Clausager, I.; Krag Petersen, I.

    2003-01-01

    The present report presents the base-line investigations of birds conducted during August 1999-April 2001 in relation to construction of an offshore wind farm at Horns Rev, 14 km west-south-west of Blaevandshuk, in the Danish North Sea. The report also presents data collected during the period September 2001-April 2002, when construction of the wind farm was in progress. The wind farm will consist of 80 wind turbines, each of 2 MW, and cover an area of c. 20 km 2 . The eastern part of the North Sea constitutes major staging and wintering grounds for huge numbers of water- and seabirds. The area is also known to be an important site for migrating birds, which especially in autumn pass in large numbers. As Denmark has obligations to protect and maintain the bird populations it was laid down in the approval for erection of the wind farm that the impact on birds should be investigated. According to the 1% criteria defined in the Ramsar Convention, the eastern part of the North Sea including the wind farm area is of international importance to divers, Common Tern, and Sandwich Tern. A number of other species, e.g. Common Eider, Common Scoter, Guillemot and Razorbill, are present in the area in significant numbers as well, though these numbers do not make up 1% of the populations. Detailed distributions of birds in the area around and at Horns Rev were virtually unknown until initiation of this project. Previous bird counts in this area have been carried out almost exclusively from the coast and detailed knowledge exists concerning the numbers of roosting at and migrating birds from the westernmost point of Jutland, Blaevandshuk. To describe the numbers and distributions of birds staging and wintering in the Horns Rev area, bird investigations were initiated in 1999 by using standardised transect counts from aircraft. Up to April 2002, 18 aerial counts have been carried out over an area of c. 1,700 km 2 centred on the Horns Rev project area. (au)

  12. Base-line investigations of birds in relation to an offshore wind farm at Horns Rev, and results from the year of construction

    Energy Technology Data Exchange (ETDEWEB)

    Kjaer Christensen, T.; Clausager, I.; Krag Petersen, I.

    2003-04-15

    The present report presents the base-line investigations of birds conducted during August 1999-April 2001 in relation to construction of an offshore wind farm at Horns Rev, 14 km west-south-west of Blaevandshuk, in the Danish North Sea. The report also presents data collected during the period September 2001-April 2002, when construction of the wind farm was in progress. The wind farm will consist of 80 wind turbines, each of 2 MW, and cover an area of c. 20 km{sup 2}. The eastern part of the North Sea constitutes major staging and wintering grounds for huge numbers of water- and seabirds. The area is also known to be an important site for migrating birds, which especially in autumn pass in large numbers. As Denmark has obligations to protect and maintain the bird populations it was laid down in the approval for erection of the wind farm that the impact on birds should be investigated. According to the 1% criteria defined in the Ramsar Convention, the eastern part of the North Sea including the wind farm area is of international importance to divers, Common Tern, and Sandwich Tern. A number of other species, e.g. Common Eider, Common Scoter, Guillemot and Razorbill, are present in the area in significant numbers as well, though these numbers do not make up 1% of the populations. Detailed distributions of birds in the area around and at Horns Rev were virtually unknown until initiation of this project. Previous bird counts in this area have been carried out almost exclusively from the coast and detailed knowledge exists concerning the numbers of roosting at and migrating birds from the westernmost point of Jutland, Blaevandshuk. To describe the numbers and distributions of birds staging and wintering in the Horns Rev area, bird investigations were initiated in 1999 by using standardised transect counts from aircraft. Up to April 2002, 18 aerial counts have been carried out over an area of c. 1,700 km{sup 2} centred on the Horns Rev project area. (au)

  13. Evaluación de dos bombas hidráulicas de engranajes de desplazamientos 32 y 50 cm3/rev

    OpenAIRE

    Pedro Paneque Rondón; Eugenio Romantchik Kriuskova; Luciano Pérez Sobrevilla; Remigio Durán Hernández; Ricardo Castillo Calderín

    2013-01-01

    Como parte de las investigaciones que se llevan a cabo en la Universidad Agraria de La Habana (UNAH), en el Centro de Mecanización Agro- pecuaria (CEMA), con la cooperación de la Universidad Autónoma Chapingo (UACh), en el Departamento de Ingeniería Mecánica Agrícola (DIMA), dirigidas al desarrollo de la Oleohidráulica, se sometieron a evaluación dos bombas de engranajes de la marca Caproni de fabricación búlgara, con desplazamientos o cilindradas de 32 y 50 cm3/rev, refiriéndose la prueba a ...

  14. Anticoking Coatings for High Temperature Petrochemical Reactors Revêtements pour réacteurs pétrochimiques à cokage réduit

    Directory of Open Access Journals (Sweden)

    Ropital F.

    2006-12-01

    Full Text Available Coke deposition is a major problem for several refinery and petrochemical processes, among which steam cracking for ethylene production. Decreasing coking rates will reduce decoking frequency and will also decrease heat transfer degradation. For these processes, a means of reducing coking phenomena is the application of anticoking coatings on the reactor walls. For this purpose a methodology was developed under a CEC Brite-Euram project with steam cracking as the main application. A first selection of the coatings and their techniques of deposition was performed according to their composition (non catalytic compounds, their resistance to carburization and oxidation and also according to the nature of the substrate. The feasibility of coating deposition was studied for small diameter furnace tubes and the techniques were perfected in particular with respect to the physicochemical characterization of the coatings and their resistance during thermal cycling and coking-decoking cycles. For the thermal cycling and the coking evaluation, industrial conditions were reproduced as closely as possible. For coking tests, a microreactor with complete mixing of the gas phase was developed for temperatures up to 950°C. The coking behavior of the coated samples was compared with conventional refractory alloys: reduction of the coking rate by a factor of 3 was measured with the most promising coating. This work was completed by the kinetic modelling of coking on uncoated materials. La formation de coke est un problème crucial pour de nombreux procédés pétrochimiques. Ralentir le cokage permet de réduire la fréquence des décokages et de limiter la dégradation du transfert thermique. Un des moyens envisageables pour réduire le cokage est le dépôt d'un revêtement à la paroi de ces réacteurs. La mise au point de tels revêtements a fait l'objet d'un projet de recherche européen Brite-Euram, pour lequel le vapocraquage a été la principale

  15. Solid polymer electrolyte lithium batteries

    Science.gov (United States)

    Alamgir, Mohamed; Abraham, Kuzhikalail M.

    1993-01-01

    This invention pertains to Lithium batteries using Li ion (Li.sup.+) conductive solid polymer electrolytes composed of solvates of Li salts immobilized in a solid organic polymer matrix. In particular, this invention relates to Li batteries using solid polymer electrolytes derived by immobilizing solvates formed between a Li salt and an aprotic organic solvent (or mixture of such solvents) in poly(vinyl chloride).

  16. Studies on the irradiated solids

    International Nuclear Information System (INIS)

    Lesueur, D.

    1988-01-01

    The 1988 progress report of the Irradiated Solids laboratory (Polytechnic School, France), is presented. The Laboratory activities concern the investigations on disordered solids (chemical or structural disorder). The disorder itself, its effects on the material physical properties and the particle-matter interactions, are investigated. The research works are performed in the following fields: solid state physics, irradiation and stoechiometric defects, and nuclear materials. The scientific reviews, the congress communications and the thesis are listed [fr

  17. Characterisation of bulk solids

    Energy Technology Data Exchange (ETDEWEB)

    D. McGlinchey [Glasgow Caledonian University, Glasgow (United Kingdom). Centre for Industrial Bulk Solids Handling

    2005-07-01

    Handling of powders and bulk solids is a critical industrial technology across a broad spectrum of industries, including minerals processing. With contributions from leading authors in their respective fields, this book provides the reader with a sound understanding of the techniques, importance and application of particulate materials characterisation. It covers the fundamental characteristics of individual particles and bulk particulate materials, and includes discussion of a wide range of measurement techniques, and the use of material characteristics in design and industrial practice. Contents: Characterising particle properties; Powder mechanics and rheology; Characterisation for hopper and stockpile design; Fluidization behaviour; Characterisation for pneumatic conveyor design; Explosiblility; 'Designer' particle characteristics; Current industrial practice; and Future trends. 130 ills.

  18. Solid state detector module

    International Nuclear Information System (INIS)

    Hoffman, D. M.

    1985-01-01

    A solid state detector in which each scintillator is optimally configured and coupled with its associated sensing diode in a way which exploits light piping effects to enhance efficiency, and at the same time provide a detector which is modular in nature. To achieve light piping, the scintillator crystal is oriented such that its sides conform with the crystal cleavage plane, and the sides are highly polished. An array of tungsten collimator plates define the individual channels. Multi-channel scintillator/diode modules are mounted behind and in registry with the plurality of collimator plates. A plurality of scintillators are bonded together after coating the surfaces thereof to minimize optical crosstalk. After lapping the face of the scintillator module, it is then bonded to a diode module with individual scintillators in registration with individual diodes. The module is then positioned in the detector array with collimator plates at the junctions between the scintillators

  19. Solid phase microextraction.

    Science.gov (United States)

    Pawliszyn, J

    2001-01-01

    Solid Phase Microextraction (SPME) uses a small volume of sorbent dispersed typically on the surface of small fibres, to isolate and concentrate analytes from sample matrix. After contact with sample, analytes are absorbed or adsorbed by the fibre phase (depending on the nature of the coating) until an equilibrium is reached in the system. The amount of an analyte extracted by the coating at equilibrium is determined by the magnitude of the partition coefficient of the analyte between the sample matrix and the coating material. After the extraction step, the fibres are transferred, with the help of a syringe-like handling device, to analytical instrument, for separation and quantitation of target analytes. This technique integrates sampling, extraction and sample introduction and is a simple way of facilitating on-site monitoring. Applications of this technique include environmental monitoring, industrial hygiene, process monitoring, clinical, forensic, food, flavour, fragrance and drug analyses, in laboratory and on-site analysis.

  20. Solid Oxide Electrolyser Cell

    DEFF Research Database (Denmark)

    Jensen, Søren Højgaard

    Solid oxide fuel cells (SOFCs) produced at Risø National Laboratory was tested as steam electrolysers under various current densities, operating temperatures and steam partial pressures. At 950 °C and a cell voltage of 1.48V the current density was -3.6A/cm2 with app. 30% H2 + 70% H2O in the inlet...... it is possible to achieve a production price of 0.7 US$/kg H2 with an electricity price of 1.3 US¢/kWh. The cell voltage was measured as function of time. In test ofabout two month of duration a long-term degradation was observed. At 850 °C, -0.5 A/cm2 with 50 vol% H2 the degradation rate was app. 20 mV/1000h...

  1. Solid medical waste

    DEFF Research Database (Denmark)

    Udofia, Emilia Asuquo; Gulis, Gabriel; Fobil, Julius

    2017-01-01

    BACKGROUND: Solid medical waste (SMW) in households is perceived to pose minimal risks to the public compared to SMW generated from healthcare facilities. While waste from healthcare facilities is subject to recommended safety measures to minimize risks to human health and the environment, similar...... waste in households is often untreated and co-mingled with household waste which ends up in landfills and open dumps in many African countries. In Ghana, the management of this potentially hazardous waste stream at household and community level has not been widely reported. The objective of this study...... likely to report harm in the household (OR 2.75, 95%CI 1.15-6.54). CONCLUSION: The belief that one can be harmed by diseases associated with SMW influenced reporting rates in the study area. Disposal practices suggest the presence of unwanted medicines and sharps in the household waste stream conferring...

  2. Solid hydrogen structure

    International Nuclear Information System (INIS)

    Collins, G.W.; Unites, W.G.; Mapoles, E.R.; Magnotta, F.; Bernat, T.P.

    1994-11-01

    The J=0->2 Raman signal from solid J=0 D 2 or H 2 reveals HCP structure when deposited at a rate 0.1 ≤ R(μ/min) ≤ 40 onto MgF 2 at T d /T tp > 0.3, a mixture of HCP and FCC crystals at 0.2 d /T tp d /T tp tp is the triple point temperature. Non-HCP crystals transform to HCP continuously and irreversibly with increasing T. Finally, the crystal size decreases with decreasing T d and increasing R, from ∼ 1 mm at T d ∼ 0.8 T tp and R ∼ 2 μ/min to ∼ 1 μm at 0.25 T tp and R ∼ 40 μ/min

  3. Solid-phase microextraction

    DEFF Research Database (Denmark)

    Nilsson, Torben

    The objective of this study has been to develop new analytical methods using the rapid, simple and solvent-free extraction technique solid-phase microextraction (SPME) for the quantitative analysis of organic pollutants at trace level in drinking water and environmental samples. The dynamics...... of SPME were examined for halogenated and non-halogenated volatile hydrocarbons, and a standard method for their quantitative analysis in aqueous samples was developed and validated in inter-laboratory studies on the basis of reference material and in comparison with the traditional methods....... The influences of some possible interferences on the SPME process were examined, and new SPME probes were tested for the in situ monitoring of groundwater pollutants. Inter-laboratory studies were carried out also for the validation of SPME for the quantitative analysis of organochlorine, organonitrogen...

  4. Atomistic Properties of Solids

    CERN Document Server

    Sirdeshmukh, Dinker B; Subhadra, K G

    2011-01-01

    The book deals with atomistic properties of solids which are determined by the crystal structure, interatomic forces and atomic displacements influenced by the effects of temperature, stress and electric fields. The book gives equal importance to experimental details and theory. There are full chapters dedicated to the tensor nature of physical properties, mechanical properties, lattice vibrations, crystal structure determination and ferroelectricity. The other crystalline states like nano-, poly-, liquid- and quasi crystals are discussed. Several new topics like nonlinear optics and the Rietveld method are presented in the book. The book lays emphasis on the role of symmetry in crystal properties. Comprehensiveness is the strength of the book; this allows users at different levels a choice of chapters according to their requirements.

  5. Solid state chemistry an introduction

    CERN Document Server

    Smart, Lesley E

    2012-01-01

    ""Smart and Moore are engaging writers, providing clear explanations for concepts in solid-state chemistry from the atomic/molecular perspective. The fourth edition is a welcome addition to my bookshelves. … What I like most about Solid State Chemistry is that it gives simple clear descriptions for a large number of interesting materials and correspondingly clear explanations of their applications. Solid State Chemistry could be used for a solid state textbook at the third or fourth year undergraduate level, especially for chemistry programs. It is also a useful resource for beginning graduate

  6. The electronic structures of solids

    CERN Document Server

    Coles, B R

    2013-01-01

    The Electronic Structures of Solids aims to provide students of solid state physics with the essential concepts they will need in considering properties of solids that depend on their electronic structures and idea of the electronic character of particular materials and groups of materials. The book first discusses the electronic structure of atoms, including hydrogen atom and many-electron atom. The text also underscores bonding between atoms and electrons in metals. Discussions focus on bonding energies and structures in the solid elements, eigenstates of free-electron gas, and electrical co

  7. Solid state electrolyte systems

    Energy Technology Data Exchange (ETDEWEB)

    Pederson, L.R.; Armstrong, B.L.; Armstrong, T.R. [Pacific Northwest Lab., Richland, WA (United States)] [and others

    1997-12-01

    Lanthanum gallates are a new family of solid electrolytes that exhibit high ionic conductivity and are stable to high temperatures. Compositions have been developed that are as much as a factor of two more conductive than yttria-stabilized zirconia at a given temperature, through partial replacement of lanthanum by calcium, strontium, and/or barium and through partial replacement of gallium by magnesium. Oxide powders were prepared using combustion synthesis techniques developed in this laboratory; these were sintered to >95% of theoretical density and consisted of a single crystalline phase. Electrical conductivities, electron and ion transference numbers, thermal expansion, and phase behavior were evaluated as a function of temperature and oxygen partial pressure. A key advantage of the use of lanthanum gallate electrolytes in solid oxide fuel cells is that the temperature of operation may be lowered to perhaps 800 C, yet provide approximately the same power density as zirconia-based cells operating at 1000 C. Ceramic electrolytes that conduct both oxygen ions and electrons are potentially useful to passively separate pure oxygen from an air source at low cost. In such materials, an oxygen ion flux in one direction is charge-compensated by an opposing electron flux. The authors have examined a wide range of mixed ion and electron conducting perovskite ceramics in the system La{sub 1{minus}x}M{sub x}Co{sub 1{minus}y{minus}z}Fe{sub y}N{sub z}O{sub 3{minus}{delta}}, where M = Sr, Ca, and Ba, and N = Pr, Mn, Ni, Cu, Ti, and Al, as well as mixed conducting brownmillerite ceramics, and have characterized oxygen permeation behavior, defect chemistry, structural and phase stability, and performance as cathodes.

  8. Phonon Squeezing by Raman Scattering.

    Science.gov (United States)

    Nori, Franco; Hu, Xuedong

    1997-03-01

    We have studied quantum fluctuation properties of a crystal lattice, and proposed several mechanisms to achieve this goal(X. Hu and F. Nori, Phys. Rev. Lett. 76, 2294 (1996); Phys. Rev. B 53, 2419 (1996); preprint.).

  9. Mass removal modes in the laser ablation of silicon by a Q-switched diode-pumped solid-state laser (DPSSL)

    International Nuclear Information System (INIS)

    Lim, Daniel J; Ki, Hyungson; Mazumder, Jyoti

    2006-01-01

    A fundamental study on the Q-switched diode-pumped solid-state laser interaction with silicon was performed both experimentally and numerically. Single pulse drilling experiments were conducted on N-type silicon wafers by varying the laser intensity from 10 8 -10 9 W cm -2 to investigate how the mass removal mechanism changes depending on the laser intensity. Hole width and depth were measured and surface morphology was studied using scanning electron microscopy. For the numerical model study, Ki et al's self-consistent continuous-wave laser drilling model (2001 J. Phys. D: Appl. Phys. 34 364-72) was modified to treat the solidification phenomenon between successive laser pulses. The model has the capabilities of simulating major interaction physics, such as melt flow, heat transfer, evaporation, homogeneous boiling, multiple reflections and surface evolution. This study presents some interesting results on how the mass removal mode changes as the laser intensity increases

  10. Model-based investigation of the circadian clock and cell cycle coupling in mouse embryonic fibroblasts: Prediction of RevErb-α up-regulation during mitosis.

    Science.gov (United States)

    Traynard, Pauline; Feillet, Céline; Soliman, Sylvain; Delaunay, Franck; Fages, François

    2016-11-01

    Experimental observations have put in evidence autonomous self-sustained circadian oscillators in most mammalian cells, and proved the existence of molecular links between the circadian clock and the cell cycle. Some mathematical models have also been built to assess conditions of control of the cell cycle by the circadian clock. However, recent studies in individual NIH3T3 fibroblasts have shown an unexpected acceleration of the circadian clock together with the cell cycle when the culture medium is enriched with growth factors, and the absence of such acceleration in confluent cells. In order to explain these observations, we study a possible entrainment of the circadian clock by the cell cycle through a regulation of clock genes around the mitosis phase. We develop a computational model and a formal specification of the observed behavior to investigate the conditions of entrainment in period and phase. We show that either the selective activation of RevErb-α or the selective inhibition of Bmal1 transcription during the mitosis phase, allow us to fit the experimental data on both period and phase, while a uniform inhibition of transcription during mitosis seems incompatible with the phase data. We conclude on the arguments favoring the RevErb-α up-regulation hypothesis and on some further predictions of the model. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  11. Solid State Studies Section

    Energy Technology Data Exchange (ETDEWEB)

    None

    1974-12-31

    Research is summarized on fuel, fertile, and cladding materials. Results of studies in the field of solid state sciences are also reported. It was found during the studies on the thermal diffusion release of /sup 133/Xe from irradiated thoria--urania powders that during prolonged annealing at high temperatures, there were several sudden burst releases of /sup 133/Xe as a function of time. These sudden bursts appear to be related to the particle size of the powders. Studies on the phase composition of U/sub 3/O/sub 8//su established that the phase obtained at room temperature after heating at 850 deg K is always oxygen deficient. Results of studies on the different modifications of U/sub 3/O/sub 8/ indicated that the so-called delta-phase has a crystal structure almost identical with the beta-phase, yet there were differences in the heats of transition of each of these phases to the alpha-U/sub 3/O/sub 8/ phase at 130 deg C. Studies on fast neutron damage in stainless steel were initiated and results related to damage by void formation were obtained even when the fluencies were only moderately high. Studies on the phase transformations in solids brought out the unusual phase transition behavior of KNO/sub 3/. It was established that the phase transformation attributed to the orthorhombic (II) to the trigonal (I) transition at 129 deg C is essentially a 2-step transition. Results of differential scanning colorimeter (DSC) studies also revealed a peculiar feature which is as yet not understood, namely that on cooling, differential thermal analysis (DTA) showed a III to II phase transition; this is not seen in the DSC. The capabilities of the DSC technique to delineate temperatures of magnetic transitions were demonstrated by studying the transitions in a number of standard substances (metals, alloys, and compounds). In studies on KMnF/sub 3/, it was further demonstrated that the DSC technique is superior in measuring and detecting the heats of crystallographic and

  12. Reply to "Comment on `Protecting bipartite entanglement by quantum interferences' "

    Science.gov (United States)

    Das, Sumanta; Agarwal, G. S.

    2018-03-01

    In a recent Comment Nair and Arun, Phys. Rev. A 97, 036301 (2018), 10.1103/PhysRevA.97.036301, it was concluded that the two-qubit entanglement protection reported in our work [Das and Agarwal, Phys. Rev. A 81, 052341 (2010), 10.1103/PhysRevA.81.052341] is erroneous. While we acknowledge the error in analytical results on concurrence when dipole matrix elements were unequal, the essential conclusions on entanglement protection are not affected.

  13. Reply to "Comment on `Particle path through a nested Mach-Zehnder interferometer' "

    Science.gov (United States)

    Griffiths, Robert B.

    2018-02-01

    While much of the technical analysis in the preceding Comment is correct, in the end it confirms the conclusion reached in my previous work [Phys. Rev. A 94, 032115 (2016), 10.1103/PhysRevA.94.032115]: A consistent histories analysis provides no support for the claim of counterfactual quantum communication put forward by Salih et al. [Phys. Rev. Lett. 110, 170502 (2013), 10.1103/PhysRevLett.110.170502].

  14. From Solid Waste to Energy.

    Science.gov (United States)

    Wisely, F. E.; And Others

    A project designed to convert solid waste to energy is explained in this paper. In April, 1972, an investor-owned utility began to burn municipal solid waste as fuel for the direct production of electric power. This unique venture was a cooperative effort between the City of St. Louis, Missouri, and the Union Electric Company, with financial…

  15. Solid waste management in Malaysia

    International Nuclear Information System (INIS)

    Nadzri Yahaya

    2010-01-01

    All of the countries over the world have their own policies about how waste were managed. Malaysia as one of the developing country also faces this problems. So, the government was established Department of National Solid Waste Management under Ministry of Housing and Local Government to control and make sure all of these problem on waste will managed systematically. Guiding principle on these issues was mentioned in 3rd Outline Perspective Plan (2000 until 2010), National Policy on Solid Waste Management, National Strategic Plan on Solid Waste Management and also 10th Malaysian Plan. In 10th Malaysian Plan, the government will complete restructuring efforts in this Solid Waste Management sector with the federalization of solid waste management and public cleansing and full enforcement of the Solid Waste and Public Cleansing Management Act 2007. The key outcomes of these efforts will include providing support to local authorities, delivering comprehensive and sanitary services and ensuring that waste is managed in a sustainable manner. These presentations cover all aspect of solid waste management in Malaysia. What are guiding principle, paradigm shift, strategies approach, monitoring and enforcement and also mention about some issues and constraint that appear in Solid waste management in Malaysia.

  16. Electrodialytic remediation of solid waste

    DEFF Research Database (Denmark)

    Hansen, Henrik K.; Ottosen, Lisbeth M.; Karlsmose, Bodil

    1996-01-01

    Electrodialytic remediation of heavy metal polluted solid waste is a method that combines the technique of electrodialysis with the electromigration of ions in the solid waste. Results of laboratory scale remediation experiments of soil are presented and considerations are given on how to secure...

  17. Suspended solids in liquid effluents

    International Nuclear Information System (INIS)

    McGrath, J.J.

    1988-06-01

    An international literature review and telephone mail survey was conducted with respect to technical and regulatory aspects of suspended solids in radioactive liquid wastes from nuclear power stations. Results of the survey are summarized and show that suspended solids are an important component of some waste streams. The data available, while limited, show these solids to be associated largely with corrosion products. The solids are highly variable in quantity, size and composition. Filtration is commonly applied for their removal from liquid effluents and is effective. Complex interactions with receiving waters can result in physical/chemical changes of released radionuclides and these phenomena have been seen as reason for not applying regulatory controls based on suspended solids content. 340 refs

  18. PhysDoc: A Distributed Network of Physics Institutions: Collecting, Indexing, and Searching High Quality Documents by Using Harvest; The Dublin Core Metadata Initiative: Mission, Current Activities, and Future Directions; Information Services for Higher Education: A New Competitive Space; Intellectual Property Conservancies.

    Science.gov (United States)

    Severiens, Thomas; Hohlfeld, Michael; Zimmermann, Kerstin; Hilf, Eberhard R.; von Ossietzky, Carl; Weibel, Stuart L.; Koch, Traugott; Hughes, Carol Ann; Bearman, David

    2000-01-01

    Includes four articles that discuss a variety to topics, including a distributed network of physics institutions documents called PhysDocs which harvests information from the local Web-servers of professional physics institutions; the Dublin Core metadata initiative; information services for higher education in a competitive environment; and…

  19. Distilling solid carbonaceous materials

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, H; Laing, B

    1926-12-04

    In the distillation of solid carbonaceous materials with by-product recovery by direct heating with a gas such as water gas, producer gas, or combustion gas which is passed in counter-flow to the materials, the volume of the gas used is such as to lower the vapor tension of the volatiles to enable the oil vapor to be liberated at temperatures not exceeding 450 to 500/sup 0/C and so that the gaseous mixture may be cooled to from 80 to 100/sup 0/C without causing the highest boiling oil fraction to condense. Coking coals may be subjected to a preliminary heat treatment with gases containing an oxygen content of from 2 to 8 percent to reduce their coking properties, and oxygen may be added to the heating gases to assist the polymerization of resinous bodies. Lubricating oil may be obtained by treating the primary oil with caustic soda to remove tar acids, refining the residue with sulfuric acid, distilling off 25 percent of the refined oil and passing the remainder through a filter press at -5/sup 0/C to extract the paraffin wax. The residue of wax-free oil is distilled to yield a lubricating oil which at normal temperatures has a static coefficient of friction of from .1 to .185. Other specifications are referred to.

  20. Distilling solid carbonaceous materials

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, H; Laing, B

    1926-12-04

    In a process of distilling solid carbonaceous materials with by-product recovery, the time factor and the temperature gradient during the distillation period are so controlled that a temperature difference exceeding 150/sup 0/C is avoided between the temperatures at the center and periphery of any suitable size of material or thickness of fuel bed. The material is heated by direct contact with an inert gas, such as water gas, producer gas, or combustion gases, which is passed in counterflow to the material and whose volume is such as to lower the vapor tension or partial pressure of the volatilizable oils and to withdraw the oils without cracking of the oil vapors. The material may be subjected to a preliminary heat treatment by gases containing 2 to 3 percent of free oxygen to reduce its coking properties, and free oxygen may be added either to the heating gases during the heat treatment, or to the retort and heating gases and vapors to polymerize resinous bodies prior to condensation or during condensation and while the oils are still wholly or partially in the vapor state.