Sample records for solid line represents

  1. VT Biodiversity Project - Representative Landscapes boundary lines

    Vermont Center for Geographic Information — (Link to Metadata) This coverage represents the results of an analysis of landscape diversity in Vermont. Polygons in the dataset represent as much as possible (in a...

  2. Calls to Teen Line: Representative Concerns of Adolescents.

    Boehm, Kathryn E.; Schondel, Connie K.; Ivoska, William J.; Marlowe, Alison L.; Manke-Mitchell, Laurie


    Study examines whether the concerns of teenagers calling a peer listening service are representative of the concerns of teenagers in the area served. Results indicate that students' biggest concerns involve family problems, peer relationships, self-esteem, and school problems. Concludes that calls to the teen line are representative. (Author/GCP)

  3. Representativeness of the LifeLines Cohort Study

    Klijs, Bart; Scholtens, Salome; Mandemakers, Jornt J.; Snieder, Harold; Stolk, Ronald P.; Smidt, Nynke


    Background LifeLines is a large prospective population-based three generation cohort study in the north of the Netherlands. Different recruitment strategies were adopted: recruitment of an index population via general practitioners, subsequent inclusion of their family members, and online self-regis

  4. Capillary Pressure and Contact Line Force on a Soft Solid

    Marchand, Antonin; Snoeijer, Jacco H; Andreotti, Bruno


    The surface free energy, or surface tension, of a liquid interface gives rise to a pressure jump when the interface is curved. Here we show that a similar capillary pressure arises at the interface of soft solids. We present experimental evidence that immersion of a thin elastomeric wire into a liquid induces a substantial elastic compression due to the solid capillary pressure at the bottom. We quantitatively determine the effective surface tension from the elastic displacement field, and find a value comparable to the liquid-vapor surface tension. Most importantly, these results also reveal the way the liquid pulls on the solid close to the contact line: the capillary force is not oriented along the liquid-air interface, nor perpendicularly to the solid surface, as previously hypothesized, but towards the interior of the liquid.

  5. An analysis of representative heating load lines for residential HSPF ratings

    Rice, C. Keith [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shen, Bo [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shrestha, Som S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)


    This report describes an analysis to investigate representative heating loads for single-family detached homes using current EnergyPlus simulations (DOE 2014a). Hourly delivered load results are used to determine binned load lines using US Department of Energy (DOE) residential prototype building models (DOE 2014b) developed by Pacific Northwest National Laboratory (PNNL). The selected residential single-family prototype buildings are based on the 2006 International Energy Conservation Code (IECC 2006) in the DOE climate regions. The resulting load lines are compared with the American National Standards Institute (ANSI)/Air-Conditioning, Heating, and Refrigeration Institute (AHRI) Standard 210/240 (AHRI 2008) minimum and maximum design heating requirement (DHR) load lines of the heating seasonal performance factor (HSPF) ratings procedure for each region. The results indicate that a heating load line closer to the maximum DHR load line, and with a lower zero load ambient temperature, is more representative of heating loads predicted for EnergyPlus prototype residential buildings than the minimum DHR load line presently used to determine HSPF ratings. An alternative heating load line equation was developed and compared to binned load lines obtained from the EnergyPlus simulation results. The effect on HSPF of the alternative heating load line was evaluated for single-speed and two-capacity heat pumps, and an average HSPF reduction of 16% was found. The alternative heating load line relationship is tied to the rated cooling capacity of the heat pump based on EnergyPlus autosizing, which is more representative of the house load characteristics than the rated heating capacity. The alternative heating load line equation was found to be independent of climate for the six DOE climate regions investigated, provided an adjustable zero load ambient temperature is used. For Region IV, the default DOE climate region used for HSPF ratings, the higher load line results in an ~28

  6. Numerical analysis of elastic coated solids in line contact

    王廷剑; 王黎钦; 古乐; 赵小力


    A line contact model of elastic coated solids is presented based on the influence coefficients (ICs) of surface displacement and stresses of coating−substrate system and the traditional contact model. The ICs of displacement and stresses are obtained from their corresponding frequency response functions (FRF) by using a conversion method based on fast Fourier transformation (FFT). The contact pressure and the stress field in the subsurface are obtained by employing conjugate gradient method (CGM) and discrete convolution fast Fourier transformation (DC-FFT). Comparison of the contact pressure and subsurface stresses obtained by the numerical method with the exact analytical solutions for Hertz contact is conducted, and the results show that the numerical solution has a very high accuracy and verify the validity of the contact model. The effect of the stiffness and thickness of coatings is further numerically studied. The result shows that the effects on contact pressure and contact width are opposite for hard and soft coatings and are intensified with the increase of coating thickness; the locations of crack initiation and propagation are different for soft and hard coatings; the risk of cracks and delaminations of coatings can be brought down by improving the lubrication condition or optimizing the non-dimensional parameterh/bh. This research offers a tool to numerically analyze the problem of elastic coated solids in line contact and make the blindness and randomness of trial-type coating design less.

  7. Recommended isolated-line profile for representing high-resolution spectroscopic transitions (IUPAC Technical Report)

    Tennyson, Jonathan; Campargue, Alain; Csaszar, Attila G; Daumont, Ludovic; Gamache, Robert R; Hodges, Joseph T; Lisak, Daniel; Naumenko, Olga V; Rothman, Laurence S; Tran, Ha; Zobov, Nikolai F; Buldyreva, Jeanna; Boone, Chris D; De Vizia, Maria Domenica; Gianfrani, Livio; Hartmann, Jean-Michel; McPheat, Robert; Murray, Jonathan; Ngo, Ngoc Hoa; Polyansky, Oleg L; Weidmann, Damien


    The report of an IUPAC Task Group, formed in 2011 on "Intensities and line shapes in high-resolution spectra of water isotopologues from experiment and theory" (Project No. 2011-022-2-100), on line profiles of isolated high-resolution rotational-vibrational transitions perturbed by neutral gas-phase molecules is presented. The well-documented inadequacies of the Voigt profile (VP), used almost universally by databases and radiative-transfer codes, to represent pressure effects and Doppler broadening in isolated vibrational-rotational and pure rotational transitions of the water molecule have resulted in the development of a variety of alternative line-profile models. These models capture more of the physics of the influence of pressure on line shapes but, in general, at the price of greater complexity. The Task Group recommends that the partially Correlated quadratic-Speed-Dependent Hard-Collision profile should be adopted as the appropriate model for high-resolution spectroscopy. For simplicity this should b...

  8. Differences in Morphology and Traction Generation of Cell Lines Representing Different Stages of Osteogenesis.

    Poellmann, Michael J; Estrada, Jonathan B; Boudou, Thomas; Berent, Zachary T; Franck, Christian; Wagoner Johnson, Amy J


    Osteogenesis is the process by which mesenchymal stem cells differentiate to osteoblasts and form bone. The morphology and root mean squared (RMS) traction of four cell types representing different stages of osteogenesis were quantified. Undifferentiated D1, differentiated D1, MC3T3-E1, and MLO-A5 cell types were evaluated using both automated image analysis of cells stained for F-actin and by traction force microscopy (TFM). Undifferentiated mesenchymal stem cell lines were small, spindly, and exerted low traction, while differentiated osteoblasts were large, had multiple processes, and exerted higher traction. Size, shape, and traction all correlated with the differentiation stage. Thus, cell morphology evolved and RMS traction increased with differentiation. The results provide a foundation for further work with these cell lines to study the mechanobiology of bone formation.

  9. Fractions but not negative numbers are represented on the mental number line.

    Ganor-Stern, Dana


    The present study is the first to directly compare numerical representations of positive numbers, negative numbers and unit fractions. The results show that negative numbers and unit fractions were not represented in the same way. Distance effects were found when positive numbers were compared with fractions but not when they were compared with negative numbers, thus suggesting that unit fractions but not negative numbers were represented on the number line with positive numbers. As indicated by the semantic congruity effect, negative numbers were perceived to be small, positive numbers were perceived as large, while unit fractions were perceived neither as large nor small. Comparisons between negative numbers were faster than between unit fractions, possibly due to the smaller differences between the holistic magnitudes of the unit fractions. Finally, comparing unit fractions to 1 was faster than comparing them to 0, consistent with the idea that unit fractions are perceived as entities smaller than 1 (Kallai & Tzelgov, 2009). The results are consistent with the idea of a mental division between numbers that represent a quantity (positive numbers and unit fractions) and those that do not (negative numbers).

  10. Complete solid state lighting (SSL) line at CEA LETI

    Robin, I. C.; Ferret, P.; Dussaigne, A.; Bougerol, C.; Salomon, D.; Chen, X. J.; Charles, M.; Tchoulfian, P.; Gasse, A.; Lagrange, A.; Consonni, M.; Bono, H.; Levy, F.; Desieres, Y.; Aitmani, A.; Makram-Matta, S.; Bialic, E.; Gorrochategui, P.; Mendizabal, L.


    With a long experience in optoelectronics, CEA-LETI has focused on Light Emitting Diode (LED) lighting since 2006. Today, all the technical challenges in the implementation of GaN LED based solid state lighting (SSL) are addressed at CEA-LETI who is now an RandD player throughout the entire value chain of LED lighting. The SSL Line at CEA-LETI first deals with the simulation of the active structures and LED devices. Then the growth is addressed in particular 2D growth on 200 mm silicon substrates. Then, technological steps are developed for the fabrication of LED dies with innovative architectures. For instance, Versatile LED Array Devices are currently being developed with a dedicated μLED technology. The objective in this case is to achieve monolithical LED arrays reported and interconnected through a silicon submount. In addition to the required bonding and 3D integration technologies, new solutions for LED chip packaging, thermal management of LED lamps and luminaires are also addressed. LETI is also active in Smart Lighting concepts which offer the possibility of new application fields for SSL technologies. An example is the recent development at CEA LETI of Visible Light Communication Technology also called LiFi. With this technology, we demonstrated a transmission rate up to 10 Mb/s and real time HD-Video transmission.

  11. Hydrography, HydroBndy-The data set is a line feature containing representing the outline ponds and small reservoirs. It consists of more than 150 lines representing natural and engineered surface water bodies., Published in 2005, Davis County Government.

    NSGIC Local Govt | GIS Inventory — Hydrography dataset current as of 2005. HydroBndy-The data set is a line feature containing representing the outline ponds and small reservoirs. It consists of more...

  12. Child mortality from solid-fuel use in India: a nationally-representative case-control study - article no. 491

    Bassani, D.G.; Jha, P.; Dhingra, N.; Kumar, R. [St. Michaels Hospital, Toronto, ON (Canada)


    Most households in low and middle income countries, including in India, use solid fuels (coal/coke/lignite, firewood, dung, and crop residue) for cooking and heating. Such fuels increase child mortality, chiefly from acute respiratory infection. There are, however, few direct estimates of the impact of solid fuel on child mortality in India. Methods: We compared household solid fuel use in 1998 between 6790 child deaths, from all causes, in the previous year and 609 601 living children living in 1.1 million nationally-representative homes in India. Analyses were stratified by child's gender, age (neonatal, post-neonatal, 1-4 years) and colder versus warmer states. We also examined the association of solid fuel to non-fatal pneumonias. Solid fuel use was very common (87% in households with child deaths and 77% in households with living children). After adjustment for demographic factors and living conditions, solid-fuel use significantly increase child deaths at ages 1-4 (prevalence ratio (PR) boys: 1.30, 95%CI 1.08-1.56; girls: 1.33, 95%CI 1.12-1.58). More girls than boys died from exposure to solid fuels. Solid fuel use was also associated with non-fatal pneumonia (boys: PR 1.54 95%CI 1.01-2.35; girls: PR 1.94 95%CI 1.13-3.33). Child mortality risks, from all causes, due to solid fuel exposure were lower than previously, but as exposure was common solid, fuel caused 6% of all deaths at ages 0-4, 20% of deaths at ages 1-4 or 128 000 child deaths in India in 2004. Solid fuel use has declined only modestly in the last decade. Aside from reducing exposure, complementary strategies such as immunization and treatment could also reduce child mortality from acute respiratory infections.

  13. A partially mesh-free scheme for representing anisotropic spatial variations along field lines

    McMillan, Ben F.


    A common numerical task is to represent functions which are highly spatially anisotropic, and to solve differential equations related to these functions. One way such anisotropy arises is that information transfer along one spatial direction is much faster than in others. In this situation, the derivative of the function is small in the local direction of a vector field B. In order to define a discrete representation, a set of surfaces Mi indexed by an integer i are chosen such that mapping along the field B induces a one-to-one relation between the points on surface Mi to those on Mi+1. For simple cases Mi may be surfaces of constant coordinate value. On each surface Mi, a function description is constructed using basis functions defined on a regular structured mesh. The definition of each basis function is extended from the surface M along the lines of the field B by multiplying it by a smooth compact support function whose argument increases with distance along B. Function values are evaluated by summing contributions associated with each surface Mi. This does not require any special connectivity of the meshes used in the neighbouring surfaces M, which substantially simplifies the meshing problem compared to attempting to find a space filling anisotropic mesh. We explore the numerical properties of the scheme, and show that it can be used to efficiently solve differential equations for certain anisotropic problems.

  14. A partially mesh-free scheme for representing anisotropic spatial variations along field lines

    McMillan, Ben F


    A common numerical task is to represent functions which are highly spatially anisotropic, and to solve differential equations related to these functions. One way such anisotropy arises is that information transfer along one spatial direction is much faster than in others. In this situation, the derivative of the function is small in the local direction of a vector field $\\mathbf{b}$. In order to define a discrete representation, a set of surfaces $M_i$ indexed by an integer $i$ are chosen such that mapping along the field $\\mathbf{b}$ induces a one-to-one relation between the points on surface $M_i$ to those on $M_{i+1}$. For simple cases $M_i$ may be surfaces of constant coordinate value. On each surface $M_i$, a function description is constructed using basis functions defined on a regular structured mesh. The definition of each basis function is extended from the surface $M$ along the lines of the field $\\mathbf{b}$ by multiplying it by a smooth compact support function whose argument increases with distan...

  15. Containerless Liquid to Solid Nucleation Pathways in Two Representative Grades of Commercially Available Zirconium

    Rulison, A. J.; Rhim, W.-K.; Bayuzick, R.; Hofmeister, W.; Morton, C.


    Experimental measurements were conducted to determine the solid metal nucleation pathways of radiatively cooling, molten zirconium spheres of two different commercially available purity grades in a high-vacuum, high-temperature electrostatic levitator. The ensemble distribution of maximum undercooling temperatures was interpreted using Poisson statistics to determine the temperature dependence of the solid metal nucleation rate. For a sample of nominally 99.95% pure zirconium, the results are consistent with heterogeneous solid metal nucleation either on static catalyst particles at least approx. 30 nm diameter or on a surface coating. For a sample of nominally 99% pure zirconium, however, it appears that heterogeneous solid metal nucleation occurred either on a polydispersion of approx. 10 nm (mean diameter) static catalyst particles or on dynamic catalyst particles that precipitated from a solution that became supersaturated as the melt cooled.

  16. The wetting problem of fluids on solid surfaces: Dynamics of lines and contact angle hysteresis

    Gouin, Henri


    8 pages; International audience; In 1805, Young was the first who introduced an expression for contact angle in static, but today, the motion of the contact-line formed at the intersection of two immiscible fluids and a solid is still subject to dispute. By means of the new physical concept of line viscosity, the equations of motions and boundary conditions for fluids in contact on a solid surface together with interface and contact-line are revisited. A new Young-Dupré equation for the dynam...

  17. Local quantification and characterisation represents a basic tool for integrated residential solid waste management

    Luis F. Marmolejo R.


    Full Text Available A sampling and characterization plan for residential solid waste (SW produced in the city of Cali in Colombia was developed between January and September 2006; this required designing an undisclosed strategy in the country and the results showed the need for an adjustment to the current SW Colombian classification scheme. The available sampling frame made a two-stage sampling plan necessary, block side (BS being the first stage and household BS the second. A 0.39 kg/(person-day solid waste per-capita production (PCP was found, which increased with socioeconomic status. Food waste was produced most, a large part consisting of cooked food. Waste from personal hygiene items was a third category, although this is not currently a category which is included in Colombian Technical Standard –RAS 2000. Although characterization techniques are used worldwide, the results showed the relevance of available sampling frame-based local characterization, using local data for sampling methods and associated sample size selection.

  18. A Sufficient Condition for a Wire-Frame Representing a Solid Modeling Uniquely

    WANG Jiaye; CHEN Hui; WANG Wenping


    Generally speaking, it is impossible for a wire-frame to define a 3D object uniquely. But wire-frame as a graphics medium is still applied in some industrial areas. A sufficient condition is presented in this paper. If this condition is satisfied by a wire-frame,then the wire-frame can represent a 3D object uniquely. The result is applied to manufacturing of progressive stripe.

  19. Taxol and discodermolide represent a synergistic drug combination in human carcinoma cell lines.

    Martello, L A; McDaid, H M; Regl, D L; Yang, C P; Meng, D; Pettus, T R; Kaufman, M D; Arimoto, H; Danishefsky, S J; Smith, A B; Horwitz, S B


    Recently, three natural products have been identified, the epothilones, eleutherobin, and discodermolide, whose mechanism of action is similar to that of Taxol in that they stabilize microtubules and block cells in the mitotic phase of the cell cycle. In this report, we have compared and contrasted the effects of these new agents in Taxol-sensitive and -resistant cell lines. We also have taken advantage of a human lung carcinoma cell line, A549-T12, that was isolated as a Taxol-resistant cell line and found to require low concentrations of Taxol (2-6 nM) for normal cell division. This study then examined the ability of these new compounds to substitute for Taxol in sustaining the growth of A549-T12 cells. Immunofluorescence and flow cytometry have both indicated that the epothilones and eleutherobin, but not discodermolide, can substitute for Taxol in this Taxol-dependent cell line. In A549-T12 cells, the presence of Taxol significantly amplified the cytotoxicity of discodermolide, and this phenomenon was not observed in combinations of Taxol with either the epothilones or eleutherobin. Median effect analysis using the combination index method revealed a schedule-independent synergistic interaction between Taxol and discodermolide in four human carcinoma cell lines, an effect that was not observed between Taxol and epothilone B. Flow cytometry revealed that concurrent exposure of A549 cells to Taxol and discodermolide at doses that do not induce mitotic arrest caused an increase in the hypodiploid population, thereby indicating that a possible mechanism for the observed synergy is the potentiation of apoptosis. Our results suggest that Taxol and discodermolide may constitute a promising chemotherapeutic combination.

  20. The characteristics of tension-provoking composition and lines--as represented in Munch's paintings.

    Halbreich, U; Friendly, D


    The way in which the Norwegian artist Edvard Munch conveyed the feeling of tension and anxiety to the viewer is analyzed, taking into account composition, form and characteristics of lines. This is in contradiction to the conventional way of content analysis. It is suggested that such an analysis may contribute to a better understanding of the way in which professional artists as well as emotionally disturbed patients express their emotions and convey them to the viewer. This may probably be used as an additional means for better evaluation of emotions in paintings.

  1. Shift and broadening of resonance lines of antiprotonic helium atoms in solid helium

    Adamczak, Andrzej


    We have estimated the shift and broadening of the resonance lines in the spectrum of antiprotonic helium atoms $\\bar{p}\\mathrm{He}^{+}$ implanted in solid helium $^4$He. The application of the response function for crystalline helium has enabled determination of the contributions from the collective degrees of freedom to the shift and broadening. It occurs that the broadening due to the collective motion is negligible compared to the natural line width. The available pair-correlation functions for crystalline $^4$He have been applied for estimating the resonance-line shift due to collisions of $\\bar{p}\\mathrm{He}^{+}$ atom with the surrounding $^4$He atoms. The dependence of the line shift, which has been calculated in the quasistatic limit, on the solid-$^4$He density is nonlinear.

  2. Melanocytes and melanin represent a first line of innate immunity against Candida albicans.

    Tapia, Cecilia V; Falconer, Maryanne; Tempio, Fabián; Falcón, Felipe; López, Mercedes; Fuentes, Marisol; Alburquenque, Claudio; Amaro, José; Bucarey, Sergio A; Di Nardo, Anna


    Melanocytes are dendritic cells located in the skin and mucosae that synthesize melanin. Some infections induce hypo- or hyperpigmentation, which is associated with the activation of Toll-like receptors (TLRs), especially TLR4. Candida albicans is an opportunist pathogen that can switch between blastoconidia and hyphae forms; the latter is associated with invasion. Our objectives in this study were to ascertain whether C. albicans induces pigmentation in melanocytes and whether this process is dependent on TLR activation, as well as relating this with the antifungal activity of melanin as a first line of innate immunity against fungal infections. Normal human melanocytes were stimulated with C. albicans supernatants or with crude extracts of the blastoconidia or hyphae forms, and pigmentation and TLR2/TLR4 expression were measured. Expression of the melanosomal antigens Melan-A and gp100 was examined for any correlation with increased melanin levels or antifungal activity in melanocyte lysates. Melanosomal antigens were induced earlier than cell pigmentation, and hyphae induced stronger melanization than blastoconidia. Notably, when melanocytes were stimulated with crude extracts of C. albicans, the cell surface expression of TLR2/TLR4 began at 48 h post-stimulation and peaked at 72 h. At this time, blastoconidia induced both TLR2 and TLR4 expression, whereas hyphae only induced TLR4 expression. Taken together, these results suggest that melanocytes play a key role in innate immune responses against C. albicans infections by recognizing pathogenic forms of C. albicans via TLR4, resulting in increased melanin content and inhibition of infection.

  3. On-line determination of the calorific value of solid fuels

    Kessel, L.B.M. van; Arendsen, A.R.J.; Brem, G.


    In thermal processes with highly inhomogeneous fuels it is desirable to know real time fuel characteristics. In the case of municipal solid waste combustion (MSWC) it was up till now not possible to determine the calorific value of the waste on-line with a high accuracy. In this paper, a new method

  4. The solid angle and the Burgers formula in the theory of gradient elasticity: Line integral representation

    Lazar, Markus, E-mail: [Heisenberg Research Group, Department of Physics, Darmstadt University of Technology, Hochschulstr. 6, D-64289 Darmstadt (Germany); Po, Giacomo [Mechanical and Aerospace Engineering, University of California, Los Angeles, Los Angeles, CA 90095 (United States)


    A representation of the solid angle and the Burgers formula as line integral is derived in the framework of the theory of gradient elasticity of Helmholtz type. The gradient version of the Eshelby–deWit representation of the Burgers formula of a closed dislocation loop is given. Such a form is suitable for the numerical implementation in 3D dislocation dynamics (DD).

  5. Model for on-line moisture-content control during solid-state fermentation

    Nagel, F.J.J.I.; Tramper, J.; Bakker, M.S.N.; Rinzema, A.


    In this study we describe a model that estimates the extracellular (nonfungal) and overall water contents of wheat grains during solid-state fermentation (SSF) with Aspergillus oryzae, using on-line measurements of oxygen, carbon dioxide, and water vapor in the gas phase. The model uses elemental ba

  6. The MEC1 and MEC2 lines represent two CLL subclones in different stages of progression towards prolymphocytic leukemia.

    Eahsan Rasul

    Full Text Available The EBV carrying lines MEC1 and MEC2 were established earlier from explants of blood derived cells of a chronic lymphocytic leukemia (CLL patient at different stages of progression to prolymphocytoid transformation (PLL. This pair of lines is unique in several respects. Their common clonal origin was proven by the rearrangement of the immunoglobulin genes. The cells were driven to proliferation in vitro by the same indigenous EBV strain. They are phenotypically different and represent subsequent subclones emerging in the CLL population. Furthermore they reflect the clinical progression of the disease. We emphasize that the support for the expression of the EBV encoded growth program is an important differentiation marker of the CLL cells of origin that was shared by the two subclones. It can be surmised that proliferation of EBV carrying cells in vitro, but not in vivo, reflects the efficient surveillance that functions even in the severe leukemic condition. The MEC1 line arose before the aggressive clinical stage from an EBV carrying cell within the subclone that was in the early prolymphocytic transformation stage while the MEC2 line originated one year later, from the subsequent subclone with overt PLL characteristics. At this time the disease was disseminated and the blood lymphocyte count was considerably elevated. The EBV induced proliferation of the MEC cells belonging to the subclones with markers of PLL agrees with earlier reports in which cells of PLL disease were infected in vitro and immortalized to LCL. They prove also that the expression of EBV encoded set of proteins can be determined at the event of infection. This pair of lines is particularly important as they provide in vitro cells that represent the subclonal evolution of the CLL disease. Furthermore, the phenotype of the MEC1 cells shares several characteristics of ex vivo CLL cells.

  7. Comparison of lung cancer cell lines representing four histopathological subtypes with gene expression profiling using quantitative real-time PCR

    Kawaguchi Makoto


    Full Text Available Abstract Background Lung cancers are the most common type of human malignancy and are intractable. Lung cancers are generally classified into four histopathological subtypes: adenocarcinoma (AD, squamous cell carcinoma (SQ, large cell carcinoma (LC, and small cell carcinoma (SC. Molecular biological characterization of these subtypes has been performed mainly using DNA microarrays. In this study, we compared the gene expression profiles of these four subtypes using twelve human lung cancer cell lines and the more reliable quantitative real-time PCR (qPCR. Results We selected 100 genes from public DNA microarray data and examined them by DNA microarray analysis in eight test cell lines (A549, ABC-1, EBC-1, LK-2, LU65, LU99, STC 1, RERF-LC-MA and a normal control lung cell line (MRC-9. From this, we extracted 19 candidate genes. We quantified the expression of the 19 genes and a housekeeping gene, GAPDH, with qPCR, using the same eight cell lines plus four additional validation lung cancer cell lines (RERF-LC-MS, LC-1/sq, 86-2, and MS-1-L. Finally, we characterized the four subtypes of lung cancer cell lines using principal component analysis (PCA of gene expression profiling for 12 of the 19 genes (AMY2A, CDH1, FOXG1, IGSF3, ISL1, MALL, PLAU, RAB25, S100P, SLCO4A1, STMN1, and TGM2. The combined PCA and gene pathway analyses suggested that these genes were related to cell adhesion, growth, and invasion. S100P in AD cells and CDH1 in AD and SQ cells were identified as candidate markers of these lung cancer subtypes based on their upregulation and the results of PCA analysis. Immunohistochemistry for S100P and RAB25 was closely correlated to gene expression. Conclusions These results show that the four subtypes, represented by 12 lung cancer cell lines, were well characterized using qPCR and PCA for the 12 genes examined. Certain genes, in particular S100P and CDH1, may be especially important for distinguishing the different subtypes. Our results

  8. The contact line behaviour of solid-liquid-gas diffuse-interface models

    Sibley, David N; Savva, Nikos; Kalliadasis, Serafim


    A solid-liquid-gas moving contact line is considered through a diffuse-interface model with the classical boundary condition of no-slip at the solid surface. Examination of the asymptotic behaviour as the contact line is approached shows that the relaxation of the classical model of a sharp liquid-gas interface, whilst retaining the no-slip condition, resolves the stress and pressure singularities associated with the moving contact line problem while the fluid velocity is well defined (not multi-valued). The moving contact line behaviour is analysed for a general problem relevant for any density dependent dynamic viscosity and volume viscosity, and for general microscopic contact angle and double well free-energy forms. Away from the contact line, analysis of the diffuse-interface model shows that the Navier--Stokes equations and classical interfacial boundary conditions are obtained at leading order in the sharp-interface limit, justifying the creeping flow problem imposed in an intermediate region in the se...

  9. Surfaces Relief Profilometry of Solid Objects by Sweeping of a Laser Line

    Salas-Peimbert, Didia P.; Trujillo-Schiaffino, Gerardo; Mendoza-Villegas, Paloma G.; Ojeda-González, Daniel; Almazán-Cuellar, Saúl; Corral-Martínez, Luis F.


    This paper describes the development of a laser system for the digitalization and three-dimensional reconstruction of solid objects. The first step consists of applying on the object a linear sweeping of a thin laser line using a laser diode with 635 nm and 5 mW, a motorized stage for linear displacement of 138 mm, and a controller with RS232 interface. The next step consists of capturing and transmitting the image of the deformed line on the object to a computer. For this step was used a monochrome camera CCD, and an image acquisition board. The last step consists of the three-dimensional reconstruction of the solid object. All the corresponding algorithms were implemented using the programming language LabVIEW.

  10. A method for analyzing on-line video images of crystallization at high-solid concentrations

    Jian Wan; Cai Y.Ma; Xue Z.Wang


    Recent research has demonstrated that on-line video imaging is a very promising technique for monitoring crystallization processes. The bottleneck in applying the technique for real-time closed-loop control is considered as image analysis that needs to be robust, fast and able to handle varied image qualities due to temporal variations of operating conditions such as mixing and solid concentrations. Image analysis at high-solid concentrations turns out to be extremely challenging because crystals tend to overlap or attach to each other and the boundaries between the crystals are usually ambiguous. This paper presents an image segmentation algorithm that can effectively deal with images taken at high-solid concentrations. The method segments crystals attached to each other along the mostly related concave points on the contours of crystal blocks. The detailed procedure is introduced with application to crystallization of L-glutamic acid in a hot-stage reactor.

  11. Inverse scattering on the line for Schr\\"odinger operators with Miura potentials, II. Different Riccati representatives

    Hryniv, R O; Perry, P A


    This is the second in a series of papers on scattering theory for one-dimensional Schr\\"odinger operators with Miura potentials admitting a Riccati representation of the form $q=u'+u^2$ for some $u\\in L^2(R)$. We consider potentials for which there exist `left' and `right' Riccati representatives with prescribed integrability on half-lines. This class includes all Faddeev--Marchenko potentials in $L^1(R,(1+|x|)dx)$ generating positive Schr\\"odinger operators as well as many distributional potentials with Dirac delta-functions and Coulomb-like singularities. We completely describe the corresponding set of reflection coefficients $r$ and justify the algorithm reconstructing $q$ from $r$.

  12. Ice Lines, Planetesimal Composition and Solid Surface Density in the Solar Nebula

    Robinson, Sarah E; Bodenheimer, Peter; Laughlin, Gregory; Turner, Neal J; Beichman, C A


    To date, there is no core accretion simulation that can successfully account for the formation of Uranus or Neptune within the observed 2-3 Myr lifetimes of protoplanetary disks. Since solid accretion rate is directly proportional to the available planetesimal surface density, one way to speed up planet formation is to take a full accounting of all the planetesimal-forming solids present in the solar nebula. By combining a viscously evolving protostellar disk with a kinetic model of ice formation, we calculate the solid surface density in the solar nebula as a function of heliocentric distance and time. We find three effects that strongly favor giant planet formation: (1) a decretion flow that brings mass from the inner solar nebula to the giant planet-forming region, (2) recent lab results (Collings et al. 2004) showing that the ammonia and water ice lines should coincide, and (3) the presence of a substantial amount of methane ice in the trans-Saturnian region. Our results show higher solid surface densitie...

  13. Fluorescence line-narrowing studies of rare earths in disordered solids

    Hall, D.W.


    This dissertation is made up of two experimental studies dealing with apparently diverse topics within the subject of rare earths (RE) in solids. The first study, described in Part II, concerns the vibrations of a disordered host material about an optically active rare-earth ion as manifested by vibrationally-assisted-electronic, or vibronic transitions. Part III of the dissertation describes an investigation of the influence of site anisotropy on the purely electronic, laser transition of Nd/sup 3 +/ in glass. These two studies are bound together by the common experimental technique of laser-induced fluorescence line narrowing (FLN). By exciting fluorescence with monochromatic light of well-characterized polarization, one may select and observe the response of a single subset of the optically active ions and obtain information that is usually masked by the inhomogeneous nature of disordered solids.

  14. Line Tension of Twist-Free Carbon Nanotube Lyotropic Liquid Crystal Microdroplets on Solid Surfaces.

    Jamali, Vida; Biggers, Evan G; van der Schoot, Paul; Pasquali, Matteo


    Line tension, i.e., the force on a three-phase contact line, has been a subject of extensive research due to its impact on technological applications including nanolithography and nanofluidics. However, there is no consensus on the sign and magnitude of the line tension, mainly because it only affects the shape of small droplets, below the length scale dictated by the ratio of line tension to surface tension σ/τ. This ratio is related to the size of constitutive molecules in the system, which translates to a nanometer for conventional fluids. Here, we show that this ratio is orders of magnitude larger in lyotropic liquid crystal systems comprising micrometer-long colloidal particles. Such systems are known to form spindle-shaped elongated liquid crystal droplets in coexistence with the isotropic phase, with the droplets flattening when in contact with flat solid surfaces. We propose a method to characterize the line tension by fitting measured droplet shape to a macroscopic theoretical model that incorporates interfacial forces and elastic deformation of the nematic phase. By applying this method to hundreds of droplets of carbon nanotubes dissolved in chlorosulfonic acid, we find that σ/τ ∼ -0.84 ± 0.06 μm. This ratio is 2 orders of magnitude larger than what has been reported for conventional fluids, in agreement with theoretical scaling arguments.

  15. Increased IMP dehydrogenase gene expression in solid tumor tissues and tumor cell lines

    Collart, F.R.; Chubb, C.B.; Mirkin, B.L.; Huberman, E.


    IMP dehydrogenase, a regulatory enzyme of guanine nucleotide biosynthesis, may play a role in cell proliferation and malignancy. To assess this possibility, we examined IMP dehydrogenase expression in a series of human solid tumor tissues and tumor cell lines in comparison with their normal counterparts. Increased IMP dehydrogenase gene expression was observed in brain tumors relative to normal brain tissue and in sarcoma cells relative to normal fibroblasts. Similarly, in several B- and T-lymphoid leukemia cell lines, elevated levels of IMP dehydrogenase mRNA and cellular enzyme were observed in comparison with the levels in peripheral blood lymphocytes. These results are consistent with an association between increased IMP dehydrogenase expression and either enhanced cell proliferation or malignant transformation.

  16. Ultrasonic crystallization monitoring technique for simultaneous in-line measurement of liquid and solid phase

    Stelzer, T.; Pertig, D.; Ulrich, J.


    The mean crystal size, the suspension density and the liquid concentration are the three most important process parameters to quantify the progress of industrial crystallization processes. It will be shown that these parameters can be in-line monitored simultaneously by means of an ultrasonic crystallization monitoring technique (UCM), which will be introduced here in a proof of concept. This process analytical technology (PAT) differs from the known ultrasonic attenuation spectroscopy (UAS). For the UCM the ultrasonic velocity and attenuation were correlated and related to characteristic events during a crystallization process measured at only one frequency (no spectra of frequencies as it is used for UAS). The results shown in this study prepare the ground to establish the UCM as a simple, less complex, robust, universal applicable, inexpensive and, therefore, a winning alternative PAT to monitor and control in-line the solid as well as the liquid phase in the industrial crystallization by means of only one measuring device with two sensors.

  17. Cyclamen exerts cytotoxicity in solid tumor cell lines: a step toward new anticancer agents?

    Yildiz, Mustafa; Bozcu, Hakan; Tokgun, Onur; Karagur, Ege Riza; Akyurt, Oktay; Akca, Hakan


    Cyclamen coum is a traditional medicinal plant in the Turkey. Its anticancer properties and whether cyclamen extract induces any cytotoxicity in solid cancer cell lines have not been thoroughly investigated previously. Therefore we examined cytotoxic effects on cervical cancer, HeLa, and non small cell lung cancer cell, H1299, lines. Cyclamen extract induced cellular death of both HeLa and H1299 cells in a dose dependent manner. We also analyzed the capacity of cyclamen extract to induce apoptosis by the TUNEL method. Here, we for the first time report that the extract of Cyclamen coum, an endemic plant for Turkey, can induce cytotoxicity via apoptosis in HeLa and H1299 cells. These results imply that cyclamen extract can be further analyzed to potentially find novel anticancer compounds.

  18. Radial line-scans as representative sampling strategy in dried-droplet laser ablation of liquid samples deposited on pre-cut filter paper disks

    Nischkauer, Winfried; Vanhaecke, Frank; Bernacchi, Sébastien; Herwig, Christoph; Limbeck, Andreas


    Nebulising liquid samples and using the aerosol thus obtained for further analysis is the standard method in many current analytical techniques, also with inductively coupled plasma (ICP)-based devices. With such a set-up, quantification via external calibration is usually straightforward for samples with aqueous or close-to-aqueous matrix composition. However, there is a variety of more complex samples. Such samples can be found in medical, biological, technological and industrial contexts and can range from body fluids, like blood or urine, to fuel additives or fermentation broths. Specialized nebulizer systems or careful digestion and dilution are required to tackle such demanding sample matrices. One alternative approach is to convert the liquid into a dried solid and to use laser ablation for sample introduction. Up to now, this approach required the application of internal standards or matrix-adjusted calibration due to matrix effects. In this contribution, we show a way to circumvent these matrix effects while using simple external calibration for quantification. The principle of representative sampling that we propose uses radial line-scans across the dried residue. This compensates for centro-symmetric inhomogeneities typically observed in dried spots. The effectiveness of the proposed sampling strategy is exemplified via the determination of phosphorus in biochemical fermentation media. However, the universal viability of the presented measurement protocol is postulated. Detection limits using laser ablation-ICP-optical emission spectrometry were in the order of 40 μg mL- 1 with a reproducibility of 10 % relative standard deviation (n = 4, concentration = 10 times the quantification limit). The reported sensitivity is fit-for-purpose in the biochemical context described here, but could be improved using ICP-mass spectrometry, if future analytical tasks would require it. Trueness of the proposed method was investigated by cross-validation with

  19. Radial line-scans as representative sampling strategy in dried-droplet laser ablation of liquid samples deposited on pre-cut filter paper disks

    Nischkauer, Winfried [Institute of Chemical Technologies and Analytics, Vienna University of Technology, Vienna (Austria); Department of Analytical Chemistry, Ghent University, Ghent (Belgium); Vanhaecke, Frank [Department of Analytical Chemistry, Ghent University, Ghent (Belgium); Bernacchi, Sébastien; Herwig, Christoph [Institute of Chemical Engineering, Vienna University of Technology, Vienna (Austria); Limbeck, Andreas, E-mail: [Institute of Chemical Technologies and Analytics, Vienna University of Technology, Vienna (Austria)


    Nebulising liquid samples and using the aerosol thus obtained for further analysis is the standard method in many current analytical techniques, also with inductively coupled plasma (ICP)-based devices. With such a set-up, quantification via external calibration is usually straightforward for samples with aqueous or close-to-aqueous matrix composition. However, there is a variety of more complex samples. Such samples can be found in medical, biological, technological and industrial contexts and can range from body fluids, like blood or urine, to fuel additives or fermentation broths. Specialized nebulizer systems or careful digestion and dilution are required to tackle such demanding sample matrices. One alternative approach is to convert the liquid into a dried solid and to use laser ablation for sample introduction. Up to now, this approach required the application of internal standards or matrix-adjusted calibration due to matrix effects. In this contribution, we show a way to circumvent these matrix effects while using simple external calibration for quantification. The principle of representative sampling that we propose uses radial line-scans across the dried residue. This compensates for centro-symmetric inhomogeneities typically observed in dried spots. The effectiveness of the proposed sampling strategy is exemplified via the determination of phosphorus in biochemical fermentation media. However, the universal viability of the presented measurement protocol is postulated. Detection limits using laser ablation-ICP-optical emission spectrometry were in the order of 40 μg mL{sup −1} with a reproducibility of 10 % relative standard deviation (n = 4, concentration = 10 times the quantification limit). The reported sensitivity is fit-for-purpose in the biochemical context described here, but could be improved using ICP-mass spectrometry, if future analytical tasks would require it. Trueness of the proposed method was investigated by cross-validation with

  20. On-line experimental validation of a model-based diagnostic algorithm dedicated to a solid oxide fuel cell system

    Polverino, Pierpaolo; Esposito, Angelo; Pianese, Cesare; Ludwig, Bastian; Iwanschitz, Boris; Mai, Andreas


    In the current energetic scenario, Solid Oxide Fuel Cells (SOFCs) exhibit appealing features which make them suitable for environmental-friendly power production, especially for stationary applications. An example is represented by micro-combined heat and power (μ-CHP) generation units based on SOFC stacks, which are able to produce electric and thermal power with high efficiency and low pollutant and greenhouse gases emissions. However, the main limitations to their diffusion into the mass market consist in high maintenance and production costs and short lifetime. To improve these aspects, the current research activity focuses on the development of robust and generalizable diagnostic techniques, aimed at detecting and isolating faults within the entire system (i.e. SOFC stack and balance of plant). Coupled with appropriate recovery strategies, diagnosis can prevent undesired system shutdowns during faulty conditions, with consequent lifetime increase and maintenance costs reduction. This paper deals with the on-line experimental validation of a model-based diagnostic algorithm applied to a pre-commercial SOFC system. The proposed algorithm exploits a Fault Signature Matrix based on a Fault Tree Analysis and improved through fault simulations. The algorithm is characterized on the considered system and it is validated by means of experimental induction of faulty states in controlled conditions.

  1. On-line calorific value sensor and validation of dynamic models applied to municipal solid waste combustion

    Kessel, L.B.M. van; Leskens, M.; Brem, G.


    This paper deals with two aspects concerning the optimization of municipal solid waste combustion (MSWC) processes. First of all, an on-line calorific value sensor is discussed by means of which the calorific value of the waste can be estimated from actual process data. Experimental results on a MSW

  2. Determination of the crystalline structure of scale solids from the 16H evaporator gravity drain line to tank 38H

    Oji, L. N. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)


    August 2015, scale solids from the 16H Evaporator Gravity Drain Line (GDL) to the Tank 38H were delivered to SRNL for analysis. The desired analytical goal was to identify and confirm the crystalline structure of the scale material and determine if the form of the aluminosilicate mineral was consistent with previous analysis of the scale material from the GDL.

  3. The Cost-estimation of Mechanical Pre-treatment Lines of Municipal Solid Waste in Latvia

    Āriņa Dace


    Full Text Available Production of refuse derived fuel from municipal solid waste in future shall play a strategic role in an integrated waste management system. The amount of landfilled biodegradable materials thus will be diminished according to provisions of the 1999 Waste Landfill Directive. The aim of this article is to evaluate cost effectiveness based on cost evaluation of the different complication of the waste pre-treatment equipment complectation and based on regenerable waste quantities in Latvia. The comparison of cost estimates is done in 3 scenarios considering potential waste quantities in Latvia: Scenario I - planned annual waste quantity is 20 kT; Scenario II - 40 kT and Scenario III - 160 kT. An increase in amount of waste and processing capacity means the decrease in costs of mechanical pre-treatment of 1 ton of waste. Thus, costs of mechanical sorting line under different scenarios with capacities of 10 t h-1, 20 t h-1 and 80 t h-1 are EUR 32 per t, EUR 24 per t and EUR 15 per t, respectively. Most feasible cost for a set of mechanical pre-treatment equipment for the capacity of 10 t h-1 is EUR 32 per t by using rotating drum screener with the following manual sorting. Mechanical pre-treatment equipment of unsorted municipal waste is economically nonbeneficial, when the use of fine (biologically degradable fraction is not possible. As the sorting of biodegradable kitchen waste is not developed under the current waste management system in Latvia, the lines for mechanical pre-treatment of household waste would be better to install in landfills.

  4. Solid-State Radio Frequency Plasma Heating Using a Nonlinear Transmission Line

    Miller, Kenneth; Ziemba, Timothy; Prager, James; Slobodov, Ilia


    Radio Frequency heating systems are rarely used by the small-scale validation platform experiments due to the high cost and complexity of these systems, which typically require high power gyrotrons or klystrons, associated power supplies, waveguides and vacuum systems. The cost and complexity of these systems can potentially be reduced with a nonlinear transmission line (NLTL) based system. In the past, NLTLs have lacked a high voltage driver that could produce long duration high voltage pulses with fast rise times at high pulse repetition frequency. Eagle Harbor Technologies, Inc. (EHT) has created new high voltage nanosecond pulser, which combined with NLTL technology will produce a low-cost, fully solid-state architecture for the generation of the RF frequencies (0.5 to 10 GHz) and peak power levels (~ 10 MW) necessary for plasma heating and diagnostic systems for the validation platform experiments within the fusion science community. The proposed system does not require the use of vacuum tube technology, is inherently lower cost, and is more robust than traditional high power RF heating schemes. Design details and initial bench testing results for the new RF system will be presented. This work is supported under DOE Grant # DE-SC0013747.

  5. Interleukin-13 receptors on human prostate carcinoma cell lines represent a novel target for a chimeric protein composed of IL-13 and a mutated form of Pseudomonas exotoxin.

    Maini, A; Hillman, G; Haas, G P; Wang, C Y; Montecillo, E; Hamzavi, F; Pontes, J E; Leland, P; Pastan, I; Debinski, W; Puri, R K


    We have discovered a new cell surface protein in the form of interleukin-13 receptor on several solid tumor cells, including human renal cell carcinoma cells (Obiri et al., 1995; Debinski et al., 1995). This study reports that human prostate cancer cell lines also express high affinity IL-13 receptors (Kd = 159 pM). These receptors are functional because IL-13 surprisingly increased proliferation of all three prostate cancer cell lines studied as determined by thymidine uptake and clonogenic assays. IL-13 receptors on prostate cancer cell lines were targeted using a chimeric protein composed of IL-13 and a mutated form of Pseudomonas exotoxin (PE38QQR). This molecule, termed IL13-PE38QQR, has been found cytotoxic to all three prostate cancer cell lines as determined by the inhibition of protein synthesis. The IC50 ranged between 1 nmol/l, to 15 nmol/l. These data were confirmed by clonogenic assays in which IL13-PE38QQR almost completely inhibited colony formation at 10 nmol/l. IL13-PE38QQR was not cytotoxic to cells that express little or no IL-13R. Heat inactivated IL13-PE38QQR was not cytotoxic to prostate cancer cells indicating specificity. IL13-PE38QQR was also cytotoxic to colonies when they were allowed to form first for several days before the addition of toxins. Our data suggest that additional studies should be performed to target IL-13 receptor bearing prostate cancer.

  6. Simulation and experimental study of the solid pulse forming lines for dielectric wall accelerator

    ZHAO Quan-Tang; YUAN Ping; ZHANG Zi-Min; CAO Shu-Chun; SHEN Xiao-Kang; LIU Ming; JING Yi; ZHAO Hong-Wei


    Two types of pulse forming lines for dielectric wall accelerator (DWA) were investigated preliminarily.By simulation with CST Microwave Studio,the results indicate the pulse forming process,which can help to understand the voltage wave transmission process and optimize the line parameters.Furthermore,the principle of the pulse forming process was proved by experiments and some excellent pulse waveforms were obtained.During the experiments,the Blumlein line and zero integral pulse (ZIP) forming line,constructed with aluminum foil,poly plate and air gap self-closing switch,were tested.The full width at half maximum (FWHM) of the waveform is 16 nanoseconds (BL) and 17 nanoseconds (ZIP line),and the formed pulse voltage amplitude is 5 kV (BL) and +2.2 kV/-1.6 kV (ZIP line).The experiments result coincides well with the simulation.

  7. Rapid, one-pot derivatization and distillation of chlorophenols from solid samples with their on-line enrichment.

    Ganeshjeevan, R; Chandrasekar, Raghavan; Kadigachalam, Parasuraman; Radhakrishnan, Ganga


    A microwave-assisted steam distillation (MASD) sample preparation technique for extracting chlorophenols from solid samples was studied. This open vessel microwave system based study developed as an integrated method since it has incorporated extractive distillation, derivatization and on-line enrichment. Gas chromatography (GC) with electron-capture detection was used for the analysis. The study involved optimization of MASD parameters and on-line enrichments using spiked solid samples. MASD achieved recoveries for spiked soil samples in the range of 94-101% within 20min with a collection of only 20ml distillate facilitating on-line enrichment. Some real samples were analyzed that included soil, wood, leather, textiles, dyes and certified reference materials of soil and wood samples. Limit of detection values of 12ng/g for pentachlorophenol and 194ng/g for monochlorophenol were found. Recoveries of 96.6% in the case of soil certified reference material (CRM) with RSD 2.7% and 80.6% in the case of wood CRM with RSD 3.3% were observed in this study. MASD studied found to produce very clean extracts in comparison to reference techniques.

  8. Study on Finite Element Analysis of Fine Solid Lines by Flexographic Printing in Printed Antennas for RFID Transponder

    M. I. Maksud


    Full Text Available Printing is offering the feasibility of producing mass quantities of a wide variety of electronic components and devices quickly and at lower cost. Flexography is mainly used for packaging applications, but is also poses a potential method for the micro manufacture of electronic devices, smart packaging and RFID. The flexographic printing process poses as an attractive candidate for printing electronics for its high speed printing capabilities where such volume and large active areas need to be printed. Therefore an investigation for its potential usage in printing electronics are highly in demand hence a research for suitable conductive ink related to this process is vital. Multiple fine solid lines of high quality are essential to enable printing of ink tracks for electronic applications. A step by step approach by printing multiple solid lines, measurements of printing plates and printed images and finite element analysis (FEA need to be carried out in advance to help comprehending this process that is influenced by many interacting parameters. Plate characteristics are among a number of process parameters that will influence print line quality, which will affect the electrical performance of printed tracks. Printing trials have also been carried out in comparison various ink to check the compatibility and the suitability of the ink developed for printing RFID antennas.

  9. On the theory for the arrest of an advancing molten contact line on a cold solid of the same material

    Schiaffino, Stefano; Sonin, Ain A.


    We show that a conventional continuum formulation of the equations and boundary conditions for the spreading of a pure molten material over a cold, solid substrate of its own kind has no meaningful solution for the angle of attack θs of the fusion front at the contact line, which is the quantity that determines contact-line arrest. θs is determined by the heat flux just behind the contact line, and the heat flux in the mathematical model is singular at the contact line. The scale of the physical mechanism which limits the heat flux at the contact line and removes the singularity is estimated by computing the point where the continuum model must be cut off in order to bring it into agreement with the experimental data for a microcrystalline wax. The cutoff scale is in the range 0.1-1 μm, that is, much larger than molecular dimensions, but of order 10-2-10-1 times the convective thermal length scale α/U.

  10. Comparism of Computer Based Yield Line Theory with Elastic Theory and Finite Element Methods for Solid Slabs

    J.O. Akinyele


    Full Text Available The complexity and conservative nature of the Yield Line Theory and its being an upper bound theory have made many design engineers to jettison the use of the analytical method in the analysis of slabs. Before now, the method has basically been a manual or hand methodwhich some engineers did not see a need for its use since there are many computer based packages in the analysis and design of slabs and other civil engineering structures. This paper presents a computer program that has adopted the yield line theory in the analysis of solid slabs. Two rectangular slabs of the same depth but differentdimensions were investigated. The Yield Line Theory was compared with two other analytical methods namely, Finite Element Method and Elastic Theory Method. The results obtained for a two-way spanning slab showed that the yield line theory is truly conservative, butincreasing the result by 25% caused the moment obtained to be very close to the results of the other two methods. Although it was still conservative, the check for deflections showed that it is reliable and economical in terms of reinforcement provision. For a one way spanning slab the results without any increment falls in between the two other methods with the Elastic method giving a conservative results. The paper concludes that the introduction of a computer-based yield line theory program will make the analytical method acceptable to design engineers in the developing countries of the world.

  11. On-line Technology Information System (OTIS): Solid Waste Management Technology Information Form (SWM TIF)

    Levri, Julie A.; Boulanger, Richard; Hogan, John A.; Rodriguez, Luis


    Contents include the following: What is OTIS? OTIS use. Proposed implementation method. Development history of the Solid Waste Management (SWM) Technology Information Form (TIF) and OTIS. Current development state of the SWM TIF and OTIS. Data collection approach. Information categories. Critiques/questions/feedback.

  12. Evaporation of liquid droplets on solid substrates. I. Flat substrate with pinned or moving contact line

    Amini, Amirhossein; Homsy, G. M.


    We study the evolution of the profile of a two-dimensional volatile liquid droplet that is evaporating on a flat heated substrate. We adopt a one-sided model with thermal control that, together with the lubrication approximation, results in an evolution equation for the local height of the droplet. Without requiring any presumption for the shape of the drop, the problem is formulated for the two modes of evaporation: a pinned contact line and a moving contact line with fixed contact angle. Numerical solutions are provided for each case. For the pinned contact line case, we observe that after a time interval the contact angle dynamics become nonlinear and, interestingly, the local contact angle goes to zero in advance of total evaporation of the drop. For the case of a moving contact line, in which the singularity at the contact line is treated by a numerical slip model, we find that the droplet nearly keeps its initial circular shape and that the contact line recedes with constant speed.

  13. Transient Fault Locating Method Based on Line Voltage and Zero-mode Current in Non-solidly Earthed Network

    ZHANG Linli; XU Bingyin; XUE Yongduan; GAO Houlei


    Non-solidly earthed systems are widely used for middle voltage distribution network at home and abroad. Fault point location especially the single phase-to-earth fault is very difficult because the fault current is very weak and the fault arc is intermittent. Although several methods have been developed, the problem of fault location has not yet been resolved very well. A new fault location method based on transient component of line voltage and 0-mode current is presented in this paper, which can realize fault section location by the feeder automation (FA) system. Line voltage signal can be obtained conveniently without requiring any additional equipment. This method is based on transient information, not affected by arc suppression coil.

  14. Representing Development

    Representing Development presents the different social representations that have formed the idea of development in Western thinking over the past three centuries. Offering an acute perspective on the current state of developmental science and providing constructive insights into future pathways...... and development, addressing their contemporary enactments and reflecting on future theoretical and empirical directions. The first section of the book provides an historical account of early representations of development that, having come from life science, has shaped the way in which developmental science has...... approached development. Section two focuses upon the contemporary issues of developmental psychology, neuroscience and developmental science at large. The final section offers a series of commentaries pointing to the questions opened by the previous chapters, looking to outline the future lines...

  15. Toward chromium speciation in solids using wavelength dispersive X-ray fluorescence spectrometry Cr Kβ lines.

    Malherbe, J; Claverie, F


    The determination of chromium speciation in solid samples is critical for environmental and industrial purposes. Several analytical methods exist to perform such a determination either directly in solid state or liquid state after an extraction step, each of them having some limitations. In this study, the use of a high-resolution wavelength-dispersive X-ray fluorescence spectrometer to determine and quantify chromium species is investigated by looking at the differences in the Kβ transition profiles between Cr(0), Cr(III) and Cr(VI) compounds. Three different approaches were tested and compared to determine the Cr(VI) fraction of known mixtures: relative height and peak fitting using calibration mixtures, partial least square regression (PLS) of pure compounds, and principal component regression (PCR) of pure compounds. The accuracy of these methods was found to be about the same with an average relative error in the range of 15%. However, PLS and PCR can be easily implemented in an automated way contrary to peak fitting which can be sometimes perceived as analyst-dependant. Another advantage of using PLS and PCR is that information concerning the other oxidation states present in the sample can be retrieved. Finally, PLS and the peak height approach can be used up to 0.5% total chromium which make the XRF an alternative technique to X-ray induced photoelectron spectroscopy (XPS) for chromium speciation in solid state.

  16. A Gurson-type criterion for porous ductile solids containing arbitrary ellipsoidal voids—I: Limit-analysis of some representative cell

    Madou, Komlanvi; Leblond, Jean-Baptiste


    Gurson (1977)'s famous model of the behavior of porous ductile solids, initially developed for spherical cavities, was extended by Gologanu et al. (1993, 1994, 1997) to spheroidal, both prolate and oblate voids. The aim of this work is to further extend it to general (non-spheroidal) ellipsoidal cavities, through approximate homogenization of some representative elementary porous cell. As a first step, we perform in the present Part I a limit-analysis of such a cell, namely an ellipsoidal volume made of some rigid-ideal-plastic von Mises material and containing a confocal ellipsoidal void, loaded arbitrarily under conditions of homogeneous boundary strain rate. This analysis provides an estimate of the overall plastic dissipation based on a family of trial incompressible velocity fields recently discovered by Leblond and Gologanu (2008), satisfying conditions of homogeneous strain rate on all ellipsoids confocal with the void and the outer boundary. The asymptotic behavior of the integrand in the expression of the global plastic dissipation is studied both far from and close to the void. The results obtained suggest approximations leading to explicit approximate expressions of the overall dissipation and yield function. These expressions contain parameters the full determination of which will be the object of Part II.

  17. Mechanism of Contact Line Movement of a Droplet Spreading Over a Solid Surface

    Feoktistov Dmitry V.


    Full Text Available The contact line movement, advancing and receding, of the distilled water droplet was studied on the polished and laser patterned aluminum surfaces. The obtained dependences of the dynamic contact angles on the contact line speed were fitted by the combined theory consisting of molecular-kinetic and hydrodynamic theories. Results obtained on laser patterned surface are found to fit better to the theory in comparison with polished surface. The assumption was made that this result is connected with the low contact angle hysteresis on the patterned surface compared to the polished one. It means that combined theory does not consider the contact angle hysteresis.

  18. Possibilities of mercury removal in the dry flue gas cleaning lines of solid waste incineration units.

    Svoboda, Karel; Hartman, Miloslav; Šyc, Michal; Pohořelý, Michael; Kameníková, Petra; Jeremiáš, Michal; Durda, Tomáš


    Dry methods of the flue gas cleaning (for HCl and SO2 removal) are useful particularly in smaller solid waste incineration units. The amount and forms of mercury emissions depend on waste (fuel) composition, content of mercury and chlorine and on the entire process of the flue gas cleaning. In the case of high HCl/total Hg molar ratio in the flue gas, the majority (usually 70-90%) of mercury is present in the form of HgCl2 and a smaller amount in the form of mercury vapors at higher temperatures. Removal of both main forms of mercury from the flue gas is dependent on chemical reactions and sorption processes at the temperatures below approx. 340 °C. Significant part of HgCl2 and a small part of elemental Hg vapors can be adsorbed on fly ash and solid particle in the air pollution control (APC) processes, which are removed in dust filters. Injection of non-impregnated active carbon (AC) or activated lignite coke particles is able to remove mainly the oxidized Hg(2+) compounds. Vapors of metallic Hg(o) are adsorbed relatively weakly. Much better chemisorption of Hg(o) together with higher sorbent capacity is achieved by AC-based sorbents impregnated with sulfur, alkali poly-sulfides, ferric chloride, etc. Inorganic sorbents with the same or similar chemical impregnation are also applicable for deeper Hg(o) removal (over 85%). SCR catalysts convert part of Hg(o) into oxidized compounds (HgO, HgCl2, etc.) contributing to more efficient Hg removal, but excess of NH3 has a negative effect. Both forms, elemental Hg(o) and HgCl2, can be converted into HgS particles by reacting with droplets/aerosol of poly-sulfides solutions/solids in flue gas. Mercury captured in the form of water insoluble HgS is more advantageous in the disposal of solid waste from APC processes. Four selected options of the dry flue gas cleaning with mercury removal are analyzed, assessed and compared (in terms of efficiency of Hg-emission reduction and costs) with wet methods and retrofits for more

  19. Global kinetic rate parameters for the formation of polycyclic aromatic hydrocarbons from the pyrolyis of catechol, a model compound representative of solid fuel moieties

    E.B. Ledesma; N.D. Marsh; A.K. Sandrowitz; M.J. Wornat [Princeton University, Princeton, NJ (United States). Department of Mechanical and Aerospace Engineering


    To obtain kinetic parameters on PAH formation relevant to solid fuels combustion, pyrolysis experiments have been conducted with catechol, a model fuel representing entities in coal and biomass. Catechol pyrolysis experiments were performed in a tubular-flow reactor at temperatures of 500-1000{sup o}C and at a residence time of 0.4 s. PAH products were identified and quantified by high-pressure liquid chromatography with ultraviolet-visible diode-array detection and by gas chromatography with flame ionization and mass spectrometric detection. A pseudo-unimolecular reaction kinetic model was used to model the experimental yield/temperature data of 15 individual aromatics and of combinations of PAH grouped by structural class and ring-number. The modeling of the individual species' yields showed that the pseudo-unimolecular model agreed very well with the experimental data. E{sub a} values ranged from 50 to 110 kcal mol{sup -1}, generally increasing as the size of the aromatic product increased from one to five aromatic rings. The pseudo-unimolecular model also performed well in modeling the experimental yields of PAH grouped by structural class and ring number. The global kinetic analysis results for PAH grouped by ring number revealed that E{sub a} values increased in the following order: 2-ring {lt} 3-ring {lt} 4-ring {lt} 5-ring {lt} 6-ring. Their yields followed the reverse order: 2-ring {lt} 3-ring {lt} 4-ring {lt} 5-ring {lt} 6-ring. These trends of increasing E{sub a} and decreasing yield, as ring number is increased, are consistent with a mechanism for PAH growth involving successive ring buildup reactions. 39 refs., 6 figs., 3 tabs.

  20. Raman spectroscopy for the in-line polymer-drug quantification and solid state characterization during a pharmaceutical hot-melt extrusion process.

    Saerens, L; Dierickx, L; Lenain, B; Vervaet, C; Remon, J P; De Beer, T


    The aim of this study was to evaluate the suitability of Raman spectroscopy as a Process Analytical Technology (PAT) tool for the in-line determination of the active pharmaceutical ingredient (API) concentration and the polymer-drug solid state during a pharmaceutical hot-melt extrusion process. For in-line API quantification, different metoprolol tartrate (MPT)--Eudragit® RL PO mixtures, containing 10%, 20%, 30% and 40% MPT, respectively, were extruded and monitored in-line in the die using Raman spectroscopy. A PLS model, regressing the MPT concentrations versus the in-line collected Raman spectra, was developed and validated, allowing real-time API concentration determination. The correlation between the predicted and real MPT concentrations of the validation samples is acceptable (R(2)=0.997). The predictive performance of the calibration model is rated by the root mean square error of prediction (RMSEP), which is 0.59%. Two different polymer-drug mixtures were prepared to evaluate the suitability of Raman spectroscopy for in-line polymer-drug solid state characterization. Mixture 1 contained 90% Eudragit® RS PO and 10% MPT and was extruded at 140°C, hence producing a solid solution. Mixture 2 contained 60% Eudragit® RS PO and 40% MPT and was extruded at 105°C, producing a solid dispersion. The Raman spectra collected during these extrusion processes provided two main observations. First, the MPT Raman peaks in the solid solution broadened compared to the corresponding solid dispersion peaks, indicating the presence of amorphous MPT. Second, peak shifts appeared in the spectra of the solid dispersion and solid solution compared to the physical mixtures, suggesting interactions between Eudragit® RS PO and MPT, most likely hydrogen bonds. These shifts were larger in the spectra of the solid solution. DSC analysis confirmed these Raman solid state observations and the interactions seen in the spectra. Raman spectroscopy is a potential PAT-tool for in-line

  1. LINES

    Minas Bakalchev


    Full Text Available The perception of elements in a system often creates their interdependence, interconditionality, and suppression. The lines from a basic geometrical element have become the model of a reductive world based on isolation according to certain criteria such as function, structure, and social organization. Their traces are experienced in the contemporary world as fragments or ruins of a system of domination of an assumed hierarchical unity. How can one release oneself from such dependence or determinism? How can the lines become less “systematic” and forms more autonomous, and less reductive? How is a form released from modernistic determinism on the new controversial ground? How can these elements or forms of representation become forms of action in the present complex world? In this paper, the meaning of lines through the ideas of Le Corbusier, Leonidov, Picasso, and Hitchcock is presented. Spatial research was made through a series of examples arising from the projects of the architectural studio “Residential Transformations”, which was a backbone for mapping the possibilities ranging from playfulness to exactness, as tactics of transformation in the different contexts of the contemporary world.

  2. 3-V Solid-State Flexible Supercapacitors with Ionic-Liquid-Based Polymer Gel Electrolyte for AC Line Filtering.

    Kang, Yu Jin; Yoo, Yongju; Kim, Woong


    State-of-the-art solid-state flexible supercapacitors with sufficiently fast response speed for AC line filtering application suffer from limited energy density. One of the main causes of the low energy density is the low cell voltage (1 V), which is limited by aqueous-solution-based gel electrolytes. In this work, we demonstrate for the first time a 3-V flexible supercapacitor for AC line filtering based on an ionic-liquid-based polymer gel electrolyte and carbon nanotube electrode material. The flexible supercapacitor exhibits an areal energy density that is more than 20 times higher than that of the previously demonstrated 1-V flexible supercapacitor (0.66 vs 0.03 μWh/cm(2)) while maintaining excellent capacitive behavior at 120 Hz. The supercapacitor shows a maximum areal power density of 1.5 W/cm(2) and a time constant of 1 ms. The improvement of the cell voltage while maintaining the fast-response capability greatly improves the potential of supercapacitors for high-frequency applications in wearable and/or portable electronics.

  3. Solid-state repetitive generator with a gyromagnetic nonlinear transmission line operating as a peak power amplifier

    Gusev, A. I.; Pedos, M. S.; Rukin, S. N.; Timoshenkov, S. P.


    In this work, experiments were made in which gyromagnetic nonlinear transmission line (NLTL) operates as a peak power amplifier of the input pulse. At such an operating regime, the duration of the input pulse is close to the period of generated oscillations, and the main part of the input pulse energy is transmitted only to the first peak of the oscillations. Power amplification is achieved due to the voltage amplitude of the first peak across the NLTL output exceeding the voltage amplitude of the input pulse. In the experiments, the input pulse with an amplitude of 500 kV and a half-height pulse duration of 7 ns is applied to the NLTL with a natural oscillation frequency of ˜300 MHz. At the output of the NLTL in 40 Ω coaxial transmission line, the pulse amplitude is increased to 740 kV and the pulse duration is reduced to ˜2 ns, which correspond to power amplification of the input pulse from ˜6 to ˜13 GW. As a source of input pulses, a solid-state semiconductor opening switch generator was used, which allowed carrying out experiments at pulse repetition frequency up to 1 kHz in the burst mode of operation.

  4. A Study on Printed Multiple Solid Line by Combining Microcontact and Flexographic Printing Process for Microelectronic and Biomedical Applications

    M. I. Maksud


    Full Text Available : Microcontact printing (µCP is an outstanding surface patterning technique in micron scale and, even in nano scale. Surface science communities like engineers and biologists have been promoting attention in µCP, therefore they have been rich in improvement to the µCP process itself. However the process is relatively slow in production. Meanwhile flexographic technique is a high speed roll to roll process, but low in resolution and still has limitation in printing of micro-scale size. Now a day, low cost fabrication is keys to the successful introduction of printed electronics and roll to roll manufacturing processes. Therefore, study to extend flexographic into the micro-scale size resolutions, may provide an economical commercialization path for electronic devices since, flexographic is a high speed technique commonly used for printing onto very large area flexible substrates. Although low resolution and poor registration are characteristics of today's flexographic process, it has many potential to achieve fine solid line micro size by combining to microcontact printing because both of them having similarities in method of carrying printed pattern to a substrates. This study have been demonstrated that 10micron line with 10micron gap successfully printed by these 2 combinations printing techniques, using graphic ink and biological ink with is Fetal Bovine Serum.

  5. Discrimination of charged particles in a neutral beam line by using a solid scintillation detector

    Woo, Jong-Kwan; Ko, Jewou; Liu, Dong


    In the past several decades, many studies have been conducted to search for non-baryonic dark matter, such as weakly interactive massive particles (WIMPs). In the search for WIMPs, charged particles incident on the detector are background particles because WIMPs are neutral. Charged particles originate from various sources, such as cosmic rays and laboratory materials surrounding the main detector. Therefore, a veto that discriminates charged particles can improve the particle-detection efficiency of the entire experiment for detecting WIMPs. Here, we investigate in the thickness range of 1 mm to 5 mm, the optimal thickness of a polystyrene scintillator as a chargedparticle veto detector. We found that 3-mm-thick polystyrene provides the best performance to veto charged particles and the charged-particle background in the search for the WIMP signal. Furthermore, we fabricated 3-mm-thick and 5-mm-thick polystyrene charged particle veto detectors that will be used in an underground laboratory in the search for WIMP dark matter. After exposing those detectors are the actual beam line, we compared the rate of charged particles measured using those detectors and the rate simulated through a Monte Carlo simulation.

  6. Solid lipid nanoparticles for hydrophilic biotech drugs: optimization and cell viability studies (Caco-2 & HEPG-2 cell lines).

    Severino, Patrícia; Andreani, Tatiana; Jäger, Alessandro; Chaud, Marco V; Santana, Maria Helena A; Silva, Amélia M; Souto, Eliana B


    Insulin was used as model protein to developed innovative Solid Lipid Nanoparticles (SLNs) for the delivery of hydrophilic biotech drugs, with potential use in medicinal chemistry. SLNs were prepared by double emulsion with the purpose of promoting stability and enhancing the protein bioavailability. Softisan(®)100 was selected as solid lipid matrix. The surfactants (Tween(®)80, Span(®)80 and Lipoid(®)S75) and insulin were chosen applying a 2(2) factorial design with triplicate of central point, evaluating the influence of dependents variables as polydispersity index (PI), mean particle size (z-AVE), zeta potential (ZP) and encapsulation efficiency (EE) by factorial design using the ANOVA test. Therefore, thermodynamic stability, polymorphism and matrix crystallinity were checked by Differential Scanning Calorimetry (DSC) and Wide Angle X-ray Diffraction (WAXD), whereas the effect of toxicity of SLNs was check in HepG2 and Caco-2 cells. Results showed a mean particle size (z-AVE) width between 294.6 nm and 627.0 nm, a PI in the range of 0.425-0.750, ZP about -3 mV, and the EE between 38.39% and 81.20%. After tempering the bulk lipid (mimicking the end process of production), the lipid showed amorphous characteristics, with a melting point of ca. 30 °C. The toxicity of SLNs was evaluated in two distinct cell lines (HEPG-2 and Caco-2), showing to be dependent on the concentration of particles in HEPG-2 cells, while no toxicity in was reported in Caco-2 cells. SLNs were stable for 24 h in in vitro human serum albumin (HSA) solution. The resulting SLNs fabricated by double emulsion may provide a promising approach for administration of protein therapeutics and antigens.

  7. Data correlation in on-line solid-phase extraction-gas chromatography-atomic emission/mass spectrometric detection of unknown microcontaminants

    Hankemeier, Th.; Rozenbrand, J.; Abhadur, M.; Vreuls, J.J.; Brinkman, U.A.Th.


    A procedure is described for the (non-target) screening of hetero-atom-containing compounds in tap and waste water by correlating data obtained by gas chromatography (GC) using atomic emission (AED) and mass selective (MS) detection. Solid-phase extraction (SPE) was coupled on-line to both GC system

  8. Solid state NMR, MRI and Sir Peter Mansfield: (1) from broad lines to narrow and back again; and (2) a highly tenuous link to landmine detection.

    Garroway, A N


    The contributions of Sir Peter Mansfield to MRI are rooted in solid state NMR. I summarize some of the important contributions of Sir Peter to that field, provide a glimpse of the state of the art in multiple-pulse line-narrowing in the early 1970s, and indicate how the earliest MRI efforts at Nottingham flowed from solid state NMR. These line-narrowing methods, providing control over the Hamiltonian governing the dynamics of nuclear spins, continue to evolve and to find new uses. I indicate how some methods and ideas from solid state NMR of the 1970s are at present applied to the detection of explosives in landmines by nuclear quadrupole resonance (NQR).

  9. Non-destructive monitoring of microbial biofilms at solid-liquid interfaces using on-line devices

    Nivens, D.E. (Tennessee Univ., Knoxville, TN (USA). Dept. of Chemistry Tennessee Univ., Knoxville, TN (USA). Inst. for Applied Microbiology); Chambers, J.Q. (Tennessee Univ., Knoxville, TN (USA). Dept. of Chemistry); White, D.C. (Tennessee Univ., Knoxville, TN (USA). Inst. for Applied Microbiology Tennessee Univ., Knoxville, TN (USA). Dept. of Microbiology Oak Ridge National Lab., TN (USA))


    Corrosion, biofouling, and related problems have been an impetus for investigating interactions between microorganisms and solid surfaces. In recent years, a number of studies have been performed to assess the damages caused by microbial influenced corrosion (MIC). In a number of these studies, electrochemical techniques have monitored the performance of metal surfaces exposed to bacteria. However, most of these methods can only indirectly detect the presence of biofilms. In this paper, two non-destructive on-line monitoring devices, attenuated total reflection Fourier transform infrared spectroscopy (ATR-FT/IR) and the quartz crystal microbalance (QCM) were used to directly monitor biofilm formation. These devices have been developed to study the initial fouling process and subsequent biofilm development and not merely the effects of the living film on the host material. The ATR-FT/IR technique provides information about biomass, exopolymer production, and the nutritional status of microbial biofilms. The QCM provides a direct measure of biomass. ATR-FT/IR and QCM detect 10{sup 6} and 10{sup 4} Caulobacter crescentus cells/cm{sup 2}, respectively. Both techniques can be coupled with electrochemical methods for deeper insight into mechanisms of MIC. 20 refs., 2 figs.

  10. Vapor bridges between solid substrates in the presence of the contact line pinning effect: Stability and capillary force

    Liu, Yawei; Zhang, Xianren


    In this work, we focus on investigating how nanobubbles mediate long-range interaction between neighboring solid substrates in the presence of the contact line pinning effect caused by surface heterogeneities. Using the constrained lattice density functional theory (LDFT), we prove that the nanobubbles, which take the form of vapor bridges here, are stabilized by the pinning effect if the separation between two substrates is less than a critical distance. The critical distance strongly depends on the chemical potential (i.e., the degree of saturation) and could become extremely long at a special chemical potential. Moreover, under the pinning effect, the substrate chemistry only determines the stability of the vapor bridges and the range of the capillary force, but has less influences on the magnitude of the capillary force, indicating that the substrate chemistry or the apparent contact angle for droplets or bubbles on the substrates is no longer a direct parameter to determine the magnitude of capillary force. A qualitative analysis for the two dimensional vapor bridges by considering the feedback mechanism can explain the results from the LDFT calculations.

  11. Defect elimination in solid-phase crystallised Si thin films by line-focus diode laser annealing

    Li, Wei, E-mail:; Varlamov, Sergey; Huang, Jialiang


    A high density of intragrain defects in solid-phase crystallised Si thin films results in poor electronic properties and impedes their use for thin-film solar cell or thin-film transistor applications. This paper demonstrates that a high-power line-focus diode laser can eliminate intragrain defects (microtwins and dislocations) in polycrystalline Si films while maintaining the smooth defect-free surface. Improved electronic properties of ultra-thin polycrystalline Si thin films are thus achieved. To alleviate crack formation during diode laser annealing, a rapid-thermal pre-treatment at 800 °C for 60 s is introduced since it effectively relieves the tensile stress in the films and thus generates a more stable precursor material for subsequent laser annealing. The film thickness plays an important role in diode laser annealing. The films thinner than 100 nm show relatively smaller improvement due to the limited absorption of 808 nm laser radiation. - Highlights: • Diode laser annealing can greatly eliminate intragrain defects in SPC poly-Si films. • Electronic qualities are effectively improved by diode laser annealing. • Residual stress in the SPC poly-Si films can be relieved by RTA pre-treatment. • A thin damage-free and smooth poly-Si film is achieved by diode laser annealing.

  12. Flow injection on-line solid phase extraction for ultra-trace lead screening with hydride generation atomic fluorescence spectrometry.

    Wan, Zhuo; Xu, Zhangrun; Wang, Jianhua


    A flow injection (FI) on-line solid phase extraction (SPE) procedure for ultra-trace lead separation and preconcentration was developed, followed by hydride generation and atomic fluorescence spectrometric (AFS) detection. Lead is retained on an iminodiacetate chelating resin packed microcolumn, and is afterward eluted with 2.5% (v/v) hydrochloric acid to facilitate the hydride generation by reaction with alkaline tetrahydroborate solution with 1% (m/v) potassium ferricyanide as an oxidizing (or sensitizing) reagent. The hydride was separated from the reaction medium in the gas-liquid separator and swept into the atomizer for quantification. The chemical variables and the FI flow parameters were carefully optimized. With a sample loading volume of 4.8 ml, quantitative retention of lead was obtained, along with an enrichment factor of 11.3 and a sampling frequency of 50 h(-1). A detection limit of 4 ng l(-1), defined as 3 times the blank standard deviation (3 sigma), was achieved along with a RSD value of 1.6% at the 0.4 microg l(-1) level. The procedure was validated by determining lead contents in two certified reference materials, and its practical applicability was further demonstrated by analysing a variety of biological and environmental samples.

  13. Adsorption at the solid-liquid interface as the source of contact angle dependence on the curvature of the three-phase line.

    Ward, C A; Sefiane, K


    We review the thermodynamic approach to determining the surface tension of solid-fluid interfaces. If the pressure is in the narrow range where the contact angle, θ, can exist, then for isothermal systems, adsorption at the solid-liquid interface affects γ(SL) or θ, but γ(SV) is very nearly equal γ(LV), the surface tension of the adsorbing fluid. For a liquid partially filling a cylinder, the pressure in the liquid phase at the three-phase line, x(3)(L), depends on the curvature of the three-phase line, C(cl), but the line tension can play no role, since it acts perpendicular to the cylinder wall. C(cl) is decreased as the cylinder diameter is increased; x(3)(L) is increased; and θ increases. For a given value of C(cl), x(3)(L) can be changed by rotating the cylinder or by changing the height of the three-phase line in a gravitational field. In all cases, for water in borosilicate glass cylinders, the value of θ is shown to increase as x(3)(L) is increased. This behaviour requires the Gibbsian adsorption at the solid-liquid interface to be negative, indicating the liquid concentration in the interphase is less than that in the bulk liquid. For sessile droplets, the value of θ depends on both x(3)(L) and C(cl). If the value of θ for spherical sessile droplets is measured as a function of C(cl), the adsorption at the solid-liquid interface that would give that dependence can be determined. It is unnecessary to introduce the line tension hypothesis to explain the dependence of θ on C(cl). Adsorption at the solid-liquid interface gives a full explanation.

  14. Surface Plasmon-Assisted Excitation of Atomic Visible Light Spectral Lines in the Impact of Highly Charged Ions 126Xeq+ on Solid Surfaces

    张小安; 赵永涛; 李福利; 杨治虎; 肖国青; 詹文龙


    We measured the visible light spectral lines of sputtering atoms from solid surfaces of Al, Ti, Ni, Ta and Au which are impacted by 150keV126Xeq+ (6≤q≤30). It is found that intensities of the light spectral lines are greatly and suddenly enhanced when the charge state of the ion is raised up to a critical value. If assuming that potential energy released from the incidention due to capturing one electron is enough to excite a surface plasmon, we can estimate the critical charge states and obtain the results very well consistent with the measurements for the above-mentioned target materials. This means that a surface plasmon induced by one electron capture can enhance the excitation of atomic visible light spectral lines in the impact of a highly charged ion on a solid surface.

  15. An On-Line Solid Phase Extraction-Liquid Chromatography-Tandem Mass Spectrometry Method for the Determination of Perfluoroalkyl Acids in Drinking and Surface Waters

    Michela Mazzoni


    Full Text Available An UHPLC-MS/MS multiresidue method based on an on-line solid phase extraction (SPE procedure was developed for the simultaneous determination of 9 perfluorinated carboxylates (from 4 to 12 carbon atoms and 3 perfluorinated sulphonates (from 4 to 8 carbon atoms. This work proposes using an on-line solid phase extraction before chromatographic separation and analysis to replace traditional methods of off-line SPE before direct injection to LC-MS/MS. Manual sample preparation was reduced to sample centrifugation and acidification, thus eliminating several procedural errors and significantly reducing time-consuming and costs. Ionization suppression between target perfluorinated analytes and their coeluting SIL-IS were detected for homologues with a number of carbon atoms less than 9, but the quantitation was not affected. Total matrix effect corrected by SIL-IS, inclusive of extraction efficacy, and of ionization efficiency, ranged between −34 and +39%. The percentage of recoveries, between 76 and 134%, calculated in different matrices (tap water and rivers impacted by different pollutions was generally satisfactory. LODs and LOQs of this on-line SPE method, which also incorporate recovery losses, ranged from 0.2 to 5.0 ng/L and from 1 to 20 ng/L, respectively. Validated on-line SPE-LC/MS/MS method has been applied in a wide survey for the determination of perfluoroalkyl acids in Italian surface and ground waters.

  16. Representing dispositions

    Röhl Johannes


    Full Text Available Abstract Dispositions and tendencies feature significantly in the biomedical domain and therefore in representations of knowledge of that domain. They are not only important for specific applications like an infectious disease ontology, but also as part of a general strategy for modelling knowledge about molecular interactions. But the task of representing dispositions in some formal ontological systems is fraught with several problems, which are partly due to the fact that Description Logics can only deal well with binary relations. The paper will discuss some of the results of the philosophical debate about dispositions, in order to see whether the formal relations needed to represent dispositions can be broken down to binary relations. Finally, we will discuss problems arising from the possibility of the absence of realizations, of multi-track or multi-trigger dispositions and offer suggestions on how to deal with them.

  17. Elimination of diastereomer interference to determine Telcagepant (MK-0974) in human plasma using on-line turbulent-flow technology and off-line solid-phase extraction coupled with liquid chromatography/tandem mass spectrometry.

    Xu, Yang; Willson, Kenneth J; Anderson, Melanie D G; Musson, Donald G; Miller-Stein, Cynthia M; Woolf, Eric J


    To eliminate the diastereomer interference on Telcagepant (MK-0974) determination during clinical study support, on-line high turbulent-flow liquid chromatography (HTLC) methods, HTLC-A and HTLC-B that covered dynamic range of 0.5-500 nM and 5-5000 nM, respectively, were developed. To meet the requirement of rapid assay transfer among multiple laboratories and analysts, a solid-phase extraction (SPE) assay was derived from the existing HTLC-B assay under the same dynamic range. The on-line HTLC assays were achieved through direct injection of plasma samples, extraction of analyte with a Cohesive C18 column (50 mm x 0.5 mm, 50 microm), followed by HPLC separation on a FluoPhase RP column (100 mm x 2.1 mm, 5 microm) and MS/MS detection. The off-line SPE assay used Waters Oasis HLB microElution plate to extract the analytes from plasma matrix before injecting on a FluoPhase RP column (150 mm x 2.1 mm, 5 microm) for LC-MS/MS analysis. Under both on-line and off-line assay conditions, the diastereomer 1c was chromatographically separated from MK-0974. Cross-validation with the pooled samples demonstrated that both on-line and off-line assays provided comparable data with a difference of pros and cons of on-line and off-line assays with regard to man power involved in sample preparation, total analysis time, carryover, cost efficiency, and the requirement for assay transfer are discussed.

  18. Single-mode solid-state polymer dye laser fabricated with standard I-line UV lithography

    Balslev, Søren; Mironov, Andrej; Nilsson, Daniel


    We present single-mode solid-state polymer dye lasers fabricated with standard UV lithography. The lasers use a high-order Bragg grating and rely on index-tuning of a photosensitive polymer for waveguiding. The gain medium is Rhodamine 6G.......We present single-mode solid-state polymer dye lasers fabricated with standard UV lithography. The lasers use a high-order Bragg grating and rely on index-tuning of a photosensitive polymer for waveguiding. The gain medium is Rhodamine 6G....

  19. In-line micro-matrix solid-phase dispersion extraction for simultaneous separation and extraction of Sudan dyes in different spices.

    Rajabi, Maryam; Sabzalian, Sedigheh; Barfi, Behruz; Arghavani-Beydokhti, Somayeh; Asghari, Alireza


    A novel, simple, fast, and miniaturized method, termed in-line micro-matrix solid-phase dispersion (in-line MMSPD), coupled with high performance liquid chromatography (HPLC) was developed for the simultaneous extraction and determination of Sudan dyes (i.e. Sudan I-IV, Sudan orange G, Sudan black B, and Sudan red G) with the aid of an experimental design strategy. In this method, a matrix solid-phase dispersion (MSPD) column including a suitable mixture of polar sorbents was inserted in the mobile phase pathway, and while the interfering compounds were retained, the analytes were eluted and entered into the analytical column. In this way, the extraction, elution, and separation of the analytes were performed sequentially. Under the optimal experimental conditions (including the amount of sample, 0.0426g; amount of dispersant phase, 0.0216g of florisil, 0.0227g of silica, 0.0141g of alumina; and blending time, 112s), the limits of detection (LODs), limits of quantification, linear dynamic ranges, and recoveries were obtained to be 0.3-15.3μgkg(-1), 1-50μgkg(-1), 50-28,000μgkg(-1), and 94.5-99.1%, respectively. The results obtained showed that determination of the selected Sudan dyes in food samples using an enough sensitive and a simple analytically validated method like in-line MMSPD may offer a suitable screening method, which could be useful for food analysis and adulteration.

  20. Solid-state Marx based two-switch voltage modulator for the On-Line Isotope Mass Separator accelerator at the European Organization for Nuclear Research.

    Redondo, L M; Silva, J Fernando; Canacsinh, H; Ferrão, N; Mendes, C; Soares, R; Schipper, J; Fowler, A


    A new circuit topology is proposed to replace the actual pulse transformer and thyratron based resonant modulator that supplies the 60 kV target potential for the ion acceleration of the On-Line Isotope Mass Separator accelerator, the stability of which is critical for the mass resolution downstream separator, at the European Organization for Nuclear Research. The improved modulator uses two solid-state switches working together, each one based on the Marx generator concept, operating as series and parallel switches, reducing the stress on the series stacked semiconductors, and also as auxiliary pulse generator in order to fulfill the target requirements. Preliminary results of a 10 kV prototype, using 1200 V insulated gate bipolar transistors and capacitors in the solid-state Marx circuits, ten stages each, with an electrical equivalent circuit of the target, are presented, demonstrating both the improved voltage stability and pulse flexibility potential wanted for this new modulator.

  1. Pretreatment HIV-drug resistance in Mexico and its impact on the effectiveness of first-line antiretroviral therapy: a nationally representative 2015 WHO survey.

    Ávila-Ríos, Santiago; García-Morales, Claudia; Matías-Florentino, Margarita; Romero-Mora, Karla A; Tapia-Trejo, Daniela; Quiroz-Morales, Verónica S; Reyes-Gopar, Helena; Ji, Hezhao; Sandstrom, Paul; Casillas-Rodríguez, Jesús; Sierra-Madero, Juan; León-Juárez, Eddie A; Valenzuela-Lara, Marisol; Magis-Rodríguez, Carlos; Uribe-Zuñiga, Patricia; Reyes-Terán, Gustavo


    WHO has developed a global HIV-drug resistance surveillance strategy, including assessment of pretreatment HIV-drug resistance. We aimed to do a nationally representative survey of pretreatment HIV-drug resistance in Mexico using WHO-recommended methods. Among 161 Ministry of Health antiretroviral therapy (ART) clinics in Mexico, the largest, including 90% of ART initiators within the Ministry of Health (66 in total), were eligible for the survey. We used a probability-proportional-to-size design method to sample 25 clinics throughout the country. Consecutive ART-naive patients with HIV about to initiate treatment were invited to participate in the survey; individuals with previous exposure to ART were excluded. We assessed pretreatment HIV-drug resistance by Sanger sequencing and next-generation sequencing of viruses from plasma specimens from eligible participants with Stanford University HIV Drug Resistance Database methods. We obtained follow-up data for a median of 9·4 months (range 6-12) after enrolment. We investigated possible relations between demographic variables and pretreatment drug resistance with univariate and multivariate logistic regression. Between Feb 3 and July 30, 2015, we screened 288 patients in 25 clinics, from whom 264 provided successfully sequenced viruses with no evidence of current exposure to antiretroviral drugs. With the Sanger method, of these 264 participants, 41 (15·5%, 95% CI 11·4-20·5) had pretreatment resistance to any antiretroviral drug and 28 (10·6%, 7·2-15·0) had pretreatment resistance to non-nucleoside reverse transcriptase inhibitors (NNRTIs). At least low-level pretreatment resistance (Stanford penalty score ≥15) was noted in 13 (4 · 9%) of participants to efavirenz and in 23 (8·7%) to the combination tenofovir plus emtricitabine plus efavirenz. With next-generation sequencing, of 264 participants, 38 (14·4%, 95% CI 10·4-19·2) had pretreatment resistance to any antiretroviral drug and 26 (9·8%, 6·5

  2. In-line Mach-Zehnder interferometer composed of microtaper and long-period grating in all-solid photonic bandgap fiber

    Wu Zhifang [Key Laboratory of Optical Information and Technology, Ministry of Education and Institute of Modern Optics, Nankai University, Tianjin 300071 (China); OPTIMUS, School of Electrical and Electronics Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 637553 (Singapore); Liu Yange; Wang Zhi; Han Tingting; Li Shuo [Key Laboratory of Optical Information and Technology, Ministry of Education and Institute of Modern Optics, Nankai University, Tianjin 300071 (China); Jiang Meng; Ping Shum, Perry [OPTIMUS, School of Electrical and Electronics Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 637553 (Singapore); CINTRA CNRS/NTU/THALES, UMI 3288, Research Techno Plaza, 50 Nanyang Drive, Border X Block, Level 6, Singapore 637553 (Singapore); Quyen Dinh, Xuan [CINTRA CNRS/NTU/THALES, UMI 3288, Research Techno Plaza, 50 Nanyang Drive, Border X Block, Level 6, Singapore 637553 (Singapore); Thales Solutions Asia Pte Ltd, R and T Department, 28 Changi North Rise, Singapore 498755 (Singapore)


    We report a compact in-line Mach-Zehnder interferometer combining a microtaper with a long-period grating (LPG) in a section of all-solid photonic bandgap fiber. Theoretical and experimental investigations reveal that the interferometer works from the interference between the fundamental core mode and the LP{sub 01} cladding supermodes. The mechanism underlying the mode coupling caused by the microtaper can be attributed to a bandgap-shifting as the fiber diameter is abruptly scaled down. In addition, the interferometer designed to strengthen the coupling ratio of the long-period grating has a promising practical application in the simultaneous measurement of curvature and temperature.

  3. On-line immunoaffinity solid-phase extraction capillary electrophoresis mass spectrometry for the analysis of large biomolecules: a preliminary report.

    Medina-Casanellas, Silvia; Benavente, Fernando; Giménez, Estela; Barbosa, José; Sanz-Nebot, Victoria


    The analysis of large biomolecules by on-line immunoaffinity solid-phase extraction capillary electrophoresis mass spectrometry (IA-SPE-CE-MS) remains unexplored because of the complex issues that need to be addressed. In this preliminary study, we used the human glycoprotein transferrin (Tf) as a model of a large biomolecule. First, we established by CE-UV a novel method compatible with IA-SPE-CE-MS, based on the use of a fused silica capillary coated with an anionic derivative of polyacrylamide (UltraTrol(TM) Dynamic Pre-Coat High Normal, HN) to prevent protein adsorption. The methodology allowed the detection of the most abundant Tf sialoforms. Repeatability studies demonstrated high stability of the coated capillaries, which was required for on-line immunoextraction and MS detection. IA-SPE-CE-UV and IA-SPE-CE-MS methods were optimized for the analysis of Tf standards and human serum samples using a laboratory-made IA sorbent. Three peaks corresponding to Tf were detected with UV detection when on-line immunoextraction was applied to the standards. The use of MS detection, however, reduced the resolution of the electrophoretic separation. Finally, we demonstrated that it was possible to detect Tf in human serum samples, after off-line serum sample de-salting by centrifugal filtration.

  4. In-line solid state prediction during pharmaceutical hot-melt extrusion in a 12 mm twin screw extruder using Raman spectroscopy.

    Saerens, Lien; Ghanam, Dima; Raemdonck, Cedric; Francois, Kjell; Manz, Jürgen; Krüger, Rainer; Krüger, Susan; Vervaet, Chris; Remon, Jean Paul; De Beer, Thomas


    The aim of this research was to use Raman spectroscopy for the in-line monitoring of the solid state of materials during pharmaceutical hot-melt extrusion in the die head of a 12 mm (development scale) twin-screw extruder during formulation development. A full factorial (mixed) design was generated to determine the influence of variations in concentration of Celecoxib (CEL) in Eudragit® E PO, three different screw configurations and varying barrel temperature profiles on the solid state, 'melt temperature' and die pressure of continuously produced extrudates in real-time. Off-line XRD and DSC analysis were used to evaluate the suitability of Raman spectroscopy for solid state predictions. First, principal component analysis (PCA) was performed on all in-line collected Raman spectra from the experimental design. The resulting PC 1 versus PC 2 scores plot showed clustering according to solid state of the extrudates, and two classes, one class where crystalline CEL is still present and a second class where no crystalline CEL was detected, were found. Then, a soft independent modelling of class analogy (SIMCA) model was developed, by modelling these two classes separately by disjoint PCA models. These two separate PCA models were then used for the classification of new produced extrudates and allowed distinction between glassy solid solutions of CEL and crystalline dispersions of CEL. All extrudates were classified similarly by Raman spectroscopy, XRD and DSC measurements, with exception of the extrudates with a 30% CEL concentration extruded at 130 °C. The Raman spectra of these experiments showed bands which were sharper than the amorphous spectra, but broader than the crystalline spectra, indicating the presence of CEL that has dissolved into the matrix and CEL in its crystalline state. XRD and DSC measurements did not detect this. Modifications in the screw configuration did not affect the solid state and did not have an effect on the solid state prediction of

  5. Quantitative, three-dimensional imaging of aluminum drop combustion in solid propellant plumes via digital in-line holography.

    Guildenbecher, Daniel R; Cooper, Marcia A; Gill, Walter; Stauffacher, Howard Lee; Oliver, Michael S; Grasser, Thomas W


    Burning aluminized propellants eject reacting molten aluminum drops with a broad size distribution. Prior to this work, in situ measurement of the drop size statistics and other quantitative flow properties was complicated by the narrow depth-of-focus of microscopic videography. Here, digital in-line holography (DIH) is demonstrated for quantitative volumetric imaging of the propellant plume. For the first time, to the best of our knowledge, in-focus features, including burning surfaces, drop morphologies, and reaction zones, are automatically measured through a depth spanning many millimeters. By quantifying all drops within the line of sight, DIH provides an order of magnitude increase in the effective data rate compared to traditional imaging. This enables rapid quantification of the drop size distribution with limited experimental repetition.

  6. Nanoscale fluid structure of liquid-solid-vapour contact lines for a wide range of contact angles

    Nold, Andreas; Goddard, Benjamin D; Kalliadasis, Serafim


    We study the nanoscale behaviour of the density of a simple fluid in the vicinity of an equilibrium contact line for a wide range of Young contact angles between 40 and 135 degrees. Cuts of the density profile at various positions along the contact line are presented, unravelling the apparent step-wise increase of the film height profile observed in contour plots of the density. The density profile is employed to compute the normal pressure acting on the substrate along the contact line. We observe that for the full range of contact angles, the maximal normal pressure cannot solely be predicted by the curvature of the adsorption film height, but is instead softened -- likely by the width of the liquid-vapour interface. Somewhat surprisingly however, the adsorption film height profile can be predicted to a very good accuracy by the Derjaguin-Frumkin disjoining pressure obtained from planar computations, as was first shown in [Nold et al., Phys. Fluids, 26, 072001, 2014] for contact angles less than 90 degrees,...


    Chen Xiaoguang; Taday oshi Hasuma; Yoshihisa Yano; Toshiko Yoshimata; Hiyoshi Kamoi; Shuzo Otani


    Objective: To study gap junction intercellular communication (GJIC), H-ras oncogene expression and ras oncogene product (P21 ras protein) expression in four human solid tumor cell lines, W1-38, CACO2, A549 and PaCa, and the effects of four compounds, Salvia miltiorrhiza derivative (SMD), d-Limonene, Turmeric derivative Ⅰ (TD-Ⅰ) and Turmeric derivative Ⅱ (TD-Ⅱ), on them. Methods: The abilities of the four solid tumor cell lines to transfer dye to adjacent cells were examined by the scrape-loading/dye transfer technique, and the Hras oncogene expression by Northern blotting and P21 ras protein expression by Western blotting. Results: The results showed the loss of intercellular coupling in PaCa cells, slight GJIC in A549 and CACO2 cells, and a good GJIC in W1-38 cells. The four compounds could improve the GJIC of PaCa to different extents. The amount of total and membrane associated P21 ras in PaCa cells were decreased after treatment with SMD, d-Limonene and TD-Ⅰ (2.5 μg/ml) for 48 h. Concomitantly, the growth of PaCa cells decreased in soft agar and had enhanced GJIC.The relative potency was found to be:d-Limonene>SMD >TD-Ⅰ=TD-Ⅱ. There was no significant effect of the four compounds on H-ras oncogene expression. Conclusion:It was suggested that there was an excellent correlation between loss of Lucifer Yellow dye transfer and ras gene mutation rate in the four solid tumor cell lines (ras gene mutation rate inversely correlated with average cell number coupled, r=0.98) i.e., the high ras gene mutation was closely correlated with loss of GJIC in these malignant human tumor cells; The antitumor effect of the monoterpene d-Limonene and the phenol compound,SMD, might be related to inhibition of P21 ras membrane association and enhancement of GJIC, whilst that of the others may be by a different mechanism; The inhibition of p21 ras membrane association was directly related to the enhancement of gap junction intercellular communication.

  8. Development of a Technique for Representing Lightning Arresters in the Surge Simulations based on the FDTD Method and its Application to the Calculation of Lightning-Induced Voltages on a Distribution Line

    Tatematsu, Akiyoshi; Noda, Taku

    Recently, the FDTD (Finite Difference Time Domain) method, which directly solves Maxwell's equations, has been applied to lightning surge problems involving electrical wires in three-dimensional arrangements, such as power and telecommunication circuits. Lightning arresters are installed to protect the circuits from abnormal voltages due to lightning, for example. We have already proposed a technique for representing a lightning arrester in the FDTD method. However, this technique simply represents the V-I characteristics of the arrester using just three parameters and requires a method for avoiding the numerical oscillation due to the nonlinear characteristics of the arrester. In this paper, we propose a new technique for representing the V-I characteristics of the arrester in detail using the piecewise linear function defined by several points and for improving the numerical stability without the method for avoiding the numerical oscillation. Using a test circuit, the proposed technique is validated by comparing the results calculated by the FDTD method with those by the EMTP (ElectroMagnetic Transients Program) which is a circuit-theory-based simulation program. Finally, as an example of applying the proposed technique, we calculate lightning-induced voltages on a distribution line with a lightning arrester. The calculated results by the FDTD method agree well with those by a conventional method based on circuit theroy.

  9. Development, validation and transfer of a near infrared method to determine in-line the end point of a fluidised drying process for commercial production batches of an approved oral solid dose pharmaceutical product.

    Peinado, Antonio; Hammond, Jonathan; Scott, Andrew


    Pharmaceutical companies are progressively adopting and introducing the principles of Quality by Design with the main purpose of assurance and built-in quality throughout the whole manufacturing process. Within this framework, a Partial Least Square (PLS) model, based on Near Infrared (NIR) spectra and humidity determinations, was built in order to determine in-line the drying end point of a fluidized bed process. The in-process method was successfully validated following the principles described within The International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use - ICH Q2 (r1) - Validation of Analytical Procedures: Text and Methodology. However, in some aspects, the cited guidelines were not appropriate to in-process methods developed and validated exclusively with in-line samples and implemented in dynamic systems, such as drying processes. In this work, a customized interpretation of guidelines has been adopted which provided the framework of evidence to support a validated application. The application has been submitted to the United States Food and Drug Administration (FDA) and The European Medicines Agency (EMA) during applications for grant of licences. Representatives from these Regulatory Authorities have specifically reviewed this novel application during on-site inspections, and have subsequently approved both the product and this application. Currently, the NIR method is implemented as a primary in-line method to control the drying end point in real-time (to below a control limit of not greater than 1.2% w/w) for commercial production batches of an approved, solid, oral-dose medicine. The implementation of this in-process method allows real-time control with benefits including a reduction in operation time and labour; sample handling and waste generation; and a reduced risk to product quality in further unit operations due to improved consistency of intermediate output at this stage. To date

  10. Measure Lines

    Crissman, Sally


    One tool for enhancing students' work with data in the science classroom is the measure line. As a coteacher and curriculum developer for The Inquiry Project, the author has seen how measure lines--a number line in which the numbers refer to units of measure--help students not only represent data but also analyze it in ways that generate…

  11. Development of a solid phase extraction method for the simultaneous determination of steroid hormones in H295R cell line using liquid chromatography-tandem mass spectrometry

    Abdel-Khalik, Jonas; Björklund, Erland; Hansen, Martin


    The H295R in vitro cell line produces the majority of the steroidogenesis, for which reason it is commonly used as a screening tool for endocrine disrupting chemicals. Simultaneous determination of the precursor cholesterol and key steroid hormones could give a broad insight into the mechanistic...... disruption of the steroidogenesis. Steroid hormones have primarily been extracted from H295R incubation medium by means of liquid-liquid extraction (LLE) and the obtained recoveries and matrix effects have typically not been stated or assessed. In the present study a solid-phase extraction (SPE) method...... was developed and validated for the simultaneous extraction of cholesterol and five key steroid hormones pregnenolone, 17-hydroxyprogesterone, testosterone, cortisol and aldosterone from H295R incubation medium, and finally detected by LC-MS/MS. Cholesterol was recovered at a level of 55.7%, while steroid...

  12. Local Environment and Interactions of Liquid and Solid Interfaces Revealed by Spectral Line Shape of Surface Selective Nonlinear Vibrational Probe

    Chen, Shun-Li; Fu, Li; Chase, Zizwe A.; Gan, Wei; Wang, Hong-Fei


    Vibrational spectral lineshape contains important detailed information of molecular vibration and reports its specific interactions and couplings to its local environment. In this work, recently developed sub-1 cm-1 high-resolution broadband sum frequency generation vibrational spectroscopy (HR-BB-SFG-VS) was used to measure the -C≡N stretch vibration in the 4-n-octyl-4’-cyanobiphenyl (8CB) Langmuir or Langmuir-Blodgett (LB) monolayer as a unique vibrational probe, and the spectral lineshape analysis revealed the local environment and interactions at the air/water, air/glass, air/calcium fluoride and air/-quartz interfaces for the first time. The 8CB Langmuir or LB film is uniform and the vibrational spectral lineshape of its -C≡N group has been well characterized, making it a good choice as the surface vibrational probe. Lineshape analysis of the 8CB -C≡N stretch SFG vibrational spectra suggests the coherent vibrational dynamics and the structural and dynamic inhomogeneity of the -C≡N group at each interface are uniquely different. In addition, it is also found that there are significantly different roles for water molecules in the LB films on different substrate surfaces. These results demonstrated the novel capabilities of the surface nonlinear spectroscopy in characterization and in understanding the specific structures and chemical interactions at the liquid and solid interfaces in general.

  13. Continuous-flow separation and pre-concentration coupled on-line to solid-surface fluorescence spectroscopy for the simultaneous determination of o-phenylphenol and thiabendazole.

    García Reyes, J F; Llorent Martínez, E J; Ortega Barrales, P; Molina Díaz, A


    A novel and single flow-injection system combined with solid-surface fluorescence detection is proposed in this work for the resolution of a mixture of two widely used pesticides (o-phenylphenol and thiabendazole). The continuous-flow methodology is based on the implementation of on-line pre-concentration and separation of both analytes on the surface of C18 silica gel beads placed just inside the flow cell, implemented with gel-phase fluorimetric multi-wavelength detection (using 305/358 and 250/345 nm as excitation/emission wavelengths for thiabendazole and o-phenylphenol, respectively). The separation of the pesticides was possible owing to the different retention/desorption kinetics of their interactions with the solid support in the zone where the stream impinges on the solid material. No previous separation of the analytes before they reach the flow cell is needed thereby simplifying substantially both the procedure and the manifold. By using a sample volume of 2,600 microL, the system was calibrated in the range 0.5-16 and 5-120 ng mL(-1) with detection limits of 0.09 and 0.60 ng mL(-1) for thiabendazole and o-phenylphenol, respectively. The RSD values (n=10) were about 1% for both analytes. The proposed methodology was applied to environmental water samples and also to various commercial pesticide formulations containing both analytes. Recovery percentages were 97-103% and 98-102% for thiabendazole and o-phenylphenol, respectively.

  14. On-line solid phase extraction using ion-pair microparticles combined with ICP-OES for the simultaneous preconcentration and determination of uranium and thorium

    Yousefi, Seyed Reza; Zolfonoun, Ehsan [Nuclear Science and Technology Research Institute, Tehran (Iran, Islamic Republic of). NFCRS


    In this work, after on-line and in-situ solid phase extraction technique was used for the extraction and preconcentration of uranium and thorium from aqueous samples prior to inductively coupled plasma optical emission spectrometry (ICP-OES) determination. In this method, sodium hexafluorophosphate (as an ion-pairing agent) was added to the sample solution containing the cationic surfactant (dodecyltrimethylammonium bromide) and the complexing agent (dibenzoylmethane). A cloudy solution was formed as a result of formation of an ion pair between surfactant and hexafluorophosphate. The solid microparticles were passed through a microcolumn filter and the adsorbed microparticles were subsequently eluted with acid, which was directly introduced into the ICP-OES nebulizer. The main variables affecting the pre-concentration and determination steps of uranium and thorium were studied and optimized. Under the optimum conditions, the enhancement factors of 97 and 95 and the detection limits of 0.52 and 0.21 μg L{sup -1} were obtained for uranium and thorium, respectively.

  15. In-line monitoring of compaction properties on a rotary tablet press during tablet manufacturing of hot-melt extruded amorphous solid dispersions.

    Grymonpré, W; Verstraete, G; Van Bockstal, P J; Van Renterghem, J; Rombouts, P; De Beer, T; Remon, J P; Vervaet, C


    As the number of applications for polymers in pharmaceutical development is increasing, there is need for fundamental understanding on how such compounds behave during tableting. This research is focussed on the tableting behaviour of amorphous polymers, their solid dispersions and the impact of hot-melt extrusion on the compaction properties of these materials. Soluplus, Kollidon VA 64 and Eudragit EPO were selected as amorphous polymers since these are widely studied carriers for solid dispersions, while Celecoxib was chosen as BCS class II model drug. Neat polymers and physical mixtures (up to 35% drug load) were processed by hot-melt extrusion (HME), milled and sieved to obtain powders with comparable particle sizes as the neat polymer. A novel approach was used for in-line analysis of the compaction properties on a rotary tablet press (Modul P, GEA) using complementary sensors and software (CDAAS, GEA). By combining 'in-die' and 'out-of-die' techniques, it was possible to investigate in a comprehensive way the impact of HME on the tableting behaviour of amorphous polymers and their formulations. The formation of stable glassy solutions altered the formulations towards more fragmentary behaviour under compression which was beneficial for the tabletability. Principal component analysis (PCA) was applied to summarize the behaviour during compaction of the formulations, enabling the selection of Soluplus and Kollidon VA 64 as the most favourable polymers for compaction of glassy solutions.

  16. Interfacing on-line solid phase extraction with monolithic column multisyringe chromatography and chemiluminescence detection: An effective tool for fast, sensitive and selective determination of thiazide diuretics.

    Maya, Fernando; Estela, José Manuel; Cerdà, Víctor


    A new, multisyringe flow injection set-up has been developed for the completely automated determination of trace thiazide compounds with diuretic action in different types of samples. The proposed instrumental set-up exploits for the first time, a low pressure on-line solid phase extraction-liquid chromatography-chemiluminescence detection method. This novel combination of sample treatments in flow systems expands the current applicability of low pressure liquid chromatography due to the isolation/preconcentration of the target compounds, besides high selectivity and sensitivity. For the determination of three thiazide compounds named hydroflumethiazide, furosemide and bendroflumethiazide, the proposed set-up provided with the preconcentration of only 1mL of sample, limits of detection of 3, 60 and 40microgL(-1), respectively. Furthermore wide linear dynamic ranges of 6-4000, 140-20,000 and 90-40,000microgL(-1), respectively, were obtained. Besides of this, a high injection throughput of 12h(-1) was also achieved. As in sports, thiazide diuretics are prohibited substances, the proposed method has been applied to their determination in urine samples. Furthermore the potential of the proposed method as a fast-screening approach for emerging contaminants in waters has been also tested by applying it to well water and leachates from a solid waste landfill.

  17. On-line anion exchange solid-phase extraction coupled to liquid chromatography with fluorescence detection to determine quinolones in water and human urine.

    Lara, Francisco J; Del Olmo-Iruela, Monsalud; García-Campaña, Ana M


    An analytical method based on on-line solid-phase extraction coupled to liquid chromatography with fluorescence detection has been developed to determine quinolones in tap water and human urine. A home-made setup was used to percolate 10 mL of sample through a solid-phase extraction column. Analytes were retained onto the sorbent by an anion exchange mechanism which ensures an optimum compatibility with the subsequent chromatographic separation. A C-18 column containing core-shell particles (2.6 μm) was used to achieve peak efficiencies up to 200,000 plates/m, at a flow rate of 1.2 mL/min and without the need for special pumps. The method allowed the determination of 11 quinolones directly in tap water samples in less than 20 min and with limits of detection ranging between 7 and 110 ng/L. The sensitivity achieved made possible the direct determination of 9 quinolones in human urine without any sample treatment, just dilution with water. Relative recoveries between 94 and 109% were obtained meaning that the matrix effect in human urine is negligible after dilution. Satisfactory results were also obtained in terms of precision since relative standard deviations were always below 13%.

  18. At-line near-infrared spectroscopy for prediction of the solid fat content of milk fat from New Zealand butter.

    Meagher, Lucy P; Holroyd, Stephen E; Illingworth, David; van de Ven, Frank; Lane, Susan


    Near-infrared (NIR) spectroscopy calibrations that will allow prediction of the solid fat content (SFC) of milk fat extracted from butter by one measurement during manufacture were developed. SFC is a measure of the amount of the solid fraction of fat crystallized at a temperature expressed as a percentage (w/w). At-line SFC determinations are currently performed by nuclear magnetic resonance (NMR) spectroscopy, which involves a 16 h delay period for tempering of the milk fat at 0 degrees C prior to the SFC measurements, from 0 to 35 degrees C in a series of 5 degrees C increments. The NIR spectra (400-2500 nm) were obtained using a sample holder maintained at 60 degrees C. Accurate predictions for the SFC (%) were developed by principal component analysis (PCA) and partial least-squares (PLS) regression models to relate the NIR spectra to the corresponding NMR values. The independent validation samples (N = 22) had a standard error of prediction (SEP) of 0.385-0.762% for SFC between 0 and 25 degrees C, with SFC reference values ranging between 70.42 and 8.96% with a standard deviation range of 3.36-1.47. The low bias (from -0.351 to -0.025), the slopes (0.935-1.077), and the excellent predictive ability (R2; 0.923-0.978) supported the validity of these calibrations.

  19. PIC microcontroller based external fast analog to digital converter to acquire wide-lined solid NMR spectra by BRUKER DRX and Avance-I spectrometers.

    Koczor, Bálint; Rohonczy, János


    Concerning many former liquid or hybrid liquid/solid NMR consoles, the built in Analog-to-Digital Converters (ADCs) are incapable of digitizing the fids at sampling rates in the MHz range. Regarding both strong anisotropic interactions in the solid state and wide chemical shift dispersion nuclei in solution phase such as (195)Pt, (119)Sn, (207)Pb etc., the spectrum range of interest might be in the MHz range. As determining the informative tensor components of anisotropic NMR interactions requires nonlinear fitting over the whole spectrum including the asymptotic baseline, it is prohibited by low sampling rates of the ADCs. Wide spectrum width is also useful in solution NMR, since windowing of wide chemical shift ranges is avoidable. We built an external analog to digital converter with 10 MHz maximal sampling rate, which can work simultaneously with the built in ADC of the spectrometer. The ADC was tested on both Bruker DRX and Avance-I NMR consoles. In addition to the analog channels it only requires three external digital lines of the NMR console. The ADC sends data to PC via USB. The whole process is controlled by software written in JAVA which is implemented under TopSpin. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. Electroplating of nanostructured polyaniline-polypyrrole composite coating in a stainless-steel tube for on-line in-tube solid phase microextraction.

    Asiabi, Hamid; Yamini, Yadollah; Seidi, Shahram; Esrafili, Ali; Rezaei, Fatemeh


    In this work, a novel and efficient on-line in-tube solid phase microextraction method followed by high performance liquid chromatography was developed for preconcentration and determination of trace amounts of parabens. A nanostructured polyaniline-polypyrrole composite was electrochemically deposited on the inner surface of a stainless steel tube and used as the extraction phase. Several important factors that influence the extraction efficiency, including type of solid-phase coating, extraction and desorption times, flow rates of the sample solution and eluent, pH, and ionic strength of the sample solution were investigated and optimized. Under the optimal conditions, the limits of detection were in the range of 0.02-0.04 μg L(-1). This method showed good linearity for parabens in the range of 0.07-50 μg L(-1), with coefficients of determination better than 0.998. The intra- and inter-assay precisions (RSD%, n=3) were in the range of 5.9-7.0% and 4.4-5.7% at three concentration levels of 2, 10, and 20 μg L(-1), respectively. The extraction recovery values for the spiked samples were in the acceptable range of 80.3-90.2%. The validated method was successfully applied for analysis of methyl-, ethyl-, and propyl parabens in some water, milk, and juice samples. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Determination of paraben preservatives in seafood using matrix solid-phase dispersion and on-line acetylation gas chromatography-mass spectrometry.

    Djatmika, Rosalina; Hsieh, Chih-Chung; Chen, Jhih-Ming; Ding, Wang-Hsien


    An effective method for determining four commonly detected paraben preservatives (methyl, ethyl, propyl and butyl paraben) in marketed seafood is presented. This method employs matrix solid-phase dispersion (MSPD) before identification and quantification of the paraben preservatives via on-line acetylation gas chromatography-mass spectrometry (GC-MS). Parameters affecting the extraction efficiency of MSPD were optimized through a Box-Behnken design method. Under optimal condition, 0.5-g of freeze-dried seafood was mixed with 0.5-g of anhydrous sodium sulfate, and dispersed with 1.0-g of Florisil using vortex. After that, the blend was transferred to a glass column containing 1.5-g of silica gel+C18 (w/w, 9:1), which acted as clean-up co-sorbents. Then, target analytes were eluted with 12mL of acetonitrile. The extract was then derivatized on-line in the GC injection-port through reaction with acetic anhydride, and the identity and quantity of the target analytes were determined by the GC-MS system. The limits of quantitation (LOQs) were 0.2 to 1.0ng/g (dry weight). Preliminary results showed that the total concentrations of four selected parabens ranged from 16.7 to 44.7ng/g (dry weight).

  2. Determination of arachidonic acid by on-line solid-phase extraction HPLC with UV detection for screening of cytosolic phospholipase A2α inhibitors.

    Hanekamp, Walburga; Lehr, Matthias


    An on-line solid-phase extraction (SPE)-liquid chromatographic method with ultraviolet detection at 200nm for screening of inhibitors of cytosolic phospholipase A(2)α (cPLA(2)α) was developed and validated. cPLA(2)α was isolated from porcine platelets. Enzyme activity was determined by measuring the release of arachidonic acid from a phospholipid substrate using automated on-line sample clean up on a trap column followed by isocratic back-flush elution on a RP18 analytical column. While the use of a conventional RP18 column for trapping the analyte led to peak broadening only after a few runs due to pollution of the column by binding of components present in the enzyme preparation, the application of a turbulent flow column (TurboFlow Cyclone™) resulted in sharp peaks even after a plurality of injections. Interestingly, for sample introduction a turbulent flow of the mobile phase produced by high flow rates was not necessary to maintain good peak shapes. The same result could also be achieved applying low flow rates (0.5 mL/min). Several known cPLA(2)α inhibitors were used to validate the test system.

  3. Site-resolved 2H relaxation experiments in solid materials by global line-shape analysis of MAS NMR spectra

    Lindh, E. L.; Stilbs, P.; Furó, I.


    We investigate a way one can achieve good spectral resolution in 2H MAS NMR experiments. The goal is to be able to distinguish between and study sites in various deuterated materials with small chemical shift dispersion. We show that the 2H MAS NMR spectra recorded during a spin-relaxation experiment are amenable to spectral decomposition because of the different evolution of spectral components during the relaxation delay. We verify that the results are robust by global least-square fitting of the spectral series both under the assumption of specific line shapes and without such assumptions (COmponent-REsolved spectroscopy, CORE). In addition, we investigate the reliability of the developed protocol by analyzing spectra simulated with different combinations of spectral parameters. The performance is demonstrated in a model material of deuterated poly(methacrylic acid) that contains two 2H spin populations with similar chemical shifts but different quadrupole splittings. In 2H-exchanged cellulose containing two 2H spin populations with very similar chemical shifts and quadrupole splittings, the method provides new site-selective information about the molecular dynamics.

  4. Analysis of heterocyclic amines in hair by on-line in-tube solid-phase microextraction coupled with liquid chromatography−tandem mass spectrometry

    Kataoka, Hiroyuki, E-mail:; Inoue, Tsutomu; Saito, Keita; Kato, Hisato; Masuda, Kazufumi


    Graphical abstract: Mutagenic and carcinogenic heterocyclic amines are accumulated in the hair of smoker. -- Highlights: •On-line in-tube solid-phase microextraction of heterocyclic amines was optimized. •Fourteen heterocyclic amines were simultaneously determined by LC–MS/MS. •Pico gram levels of heterocyclic amines could be easily analyzed within 15 min. •Heterocyclic amines could be quantitatively analyzed from several milligrams of hair. •The method is useful for the assessment of long-term exposure to heterocyclic amines. -- Abstract: Mutagenic and carcinogenic heterocyclic amines (HCAs) are formed during heating of various proteinaceous foods, but human exposure to HCAs has not yet been elucidated in detail. To assess long-term exposure to HCAs, we developed a simple and sensitive method for measuring HCAs in hair by automated on-line in-tube solid-phase microextraction (SPME) coupled with liquid chromatography–tandem mass spectrometry (LC–MS/MS). Using a Zorbax Eclipse XDB-C8 column, 16 HCAs were analyzed within 15 min. The optimum in-tube SPME conditions were 20 draw/eject cycles of 40 μL sample at a flow rate of 200 μL min{sup −1} using a Supel-Q PLOT capillary column as an extraction device. The extracted HCAs were easily desorbed from the column by passage of the mobile phase, with no carryover observed. This in-tube SPME LC–MS/MS method showed good linearity for HCAs in the range of 10–2000 pg mL{sup −1}, with correlation coefficients above 0.9989 (n = 18), using stable isotope-labeled HCA internal standards. The detection limits (S/N = 3) of 14 HCAs except for MeAαC and Glu-P-1 were 0.10–0.79 pg mL{sup −1}. This method was successfully utilized to analyze 14 HCAs in hair samples without any interference peaks, with quantitative limits (S/N = 10) of about 0.17–1.32 pg mg{sup −1} hair. Using this method, we evaluated the exposure to HCAs in cigarette smoke and the suitability of using hair HCAs as exposure biomarkers.

  5. The determination of organochlorine pesticides based on dynamic microwave-assisted extraction coupled with on-line solid-phase extraction of high-performance liquid chromatography

    Chen Ligang [College of Chemistry, Jilin University, 2699 Qianjin Street, Changchun 130012 (China); Ding Lan [College of Chemistry, Jilin University, 2699 Qianjin Street, Changchun 130012 (China)]. E-mail:; Jin Haiyan [College of Chemistry, Jilin University, 2699 Qianjin Street, Changchun 130012 (China); Song Daqian [College of Chemistry, Jilin University, 2699 Qianjin Street, Changchun 130012 (China); Zhang Huarong [College of Chemistry, Jilin University, 2699 Qianjin Street, Changchun 130012 (China); Li Jiantao [College of Chemistry, Jilin University, 2699 Qianjin Street, Changchun 130012 (China); Zhang Kun [College of Chemistry, Jilin University, 2699 Qianjin Street, Changchun 130012 (China); Wang Yutang [College of Chemistry, Jilin University, 2699 Qianjin Street, Changchun 130012 (China); Zhang Hanqi [College of Chemistry, Jilin University, 2699 Qianjin Street, Changchun 130012 (China)


    A rapid technique based on dynamic microwave-assisted extraction coupled with on-line solid-phase extraction of high-performance liquid chromatography (DMAE-SPE-HPLC) has been developed. A TM{sub 010} microwave resonance cavity built in the laboratory was applied to concentrate the microwave energy. The sample placed in the zone of microwave irradiation was extracted with 95% acetonitrile (ACN) aqueous solution which was driven by a peristaltic pump at a flow rate of 1.0 mL min{sup -1}. The extraction can be completed in a recirculating system in 10 min. When a number of extraction cycles were completed, the extract (1 mL) was diluted on-line with water. Then the extract was loaded into an SPE column where the analytes were retained while the unretained matrix components were washed away. Subsequently, the analytes were automatically transferred from the SPE column to the analytical column and determined by UV detector at 238 nm. The technique was used for determination of organochlorine pesticides (OCPs) in grains, including wheat, rice, corn and bean. The limits of detection of OCPs are in the range of 19-37 ng g{sup -1}. The recoveries obtained by analyzing the four spiked grain samples are in the range of 86-105%, whereas the relative standard deviation (R.S.D.) values are <8.7% ranging from 1.2 to 8.7%. Our method was demonstrated to be fast, accurate, and precise. In addition, only small quantities of solvent and sample were required.

  6. The synergistic effect between vanillin and doxorubicin in ehrlich ascites carcinoma solid tumor and MCF-7 human breast cancer cell line.

    Elsherbiny, Nehal M; Younis, Nahla N; Shaheen, Mohamed A; Elseweidy, Mohamed M


    Despite the remarkable anti-tumor activity of doxorubicin (DOX), its clinical application is limited due to multiple organ toxicities. Products with less side effects are therefore highly requested. The current study investigated the anti-cancer activities of vanillin against breast cancer and possible synergistic potentiation of DOX chemotherapeutic effects by vanillin. Vanillin (100mg/kg), DOX (2mg/kg) and their combination were administered i.p. to solid Ehrlich tumor-bearing mice for 21days. MCF-7 human breast cancer cell line was treated with vanillin (1 and 2mM), DOX (100μM) or their combination. Protection against DOX-induced nephrotoxicity was studied in rats that received vanillin (100mg/kg, ip) for 10days with a single dose of DOX (15mg/kg) on day 6. Vanillin exerted anticancer effects comparable to DOX and synergesticlly potentiated DOX anticancer effects both in-vivo and in-vitro. The anticancer potency of vanillin in-vivo was mediated via apoptosis and antioxidant capacity. It also offered an in-vitro growth inhibitory effect and cytotoxicity mediated by apoptosis (increased caspase-9 and Bax:Bcl-2 ratio) along with anti-metasasis effect. Vanillin protected against DOX-induced nephrotoxicity in rats. In conclusion, vanillin can be a potential lead molecule for the development of non-toxic agents for the treatment of breast cancer either alone or combined with DOX. Copyright © 2016. Published by Elsevier GmbH.

  7. Simultaneous determination of three banned psychiatric drugs in pig feed and tissue using solid-phase reactor on-line oxidizing and HPLC-fluorescence detection.

    Qi, Liang; Duan, Li-Min; Sun, Xiao-Huan; Zhang, Jing; Zhang, Zhi-Qi


    The banned addition of psychiatric drugs such as phenothiazines to animal feed and foodstuffs increases the risk of human organ lesion. Phenothiazines usually exhibit weak native fluorescence and can be oxidized to strongly fluorescent compounds. In this study, a novel, sensitive and convenient method of HPLC-fluorescence detection based on post-column on-line oxidizing with lead dioxide solid-phase reactor has been developed for simultaneous determination of three banned psychotropic drugs, promethazine, chlorpromazine and thioridazine. Three compounds were successfully separated on an Agilent TC-C18 column with mobile phase of acetonitrile (A) and water (B), both containing 0.5% (v/v) formic acid. A gradient elution was programmed and fluorimetric detection was performed at λex /λem of 332/373 nm for promethazine, 340/380 nm for chlorpromazine and 352/432 nm for thioridazine. The calibration graphs gave good linearity over the concentration ranges of 30.0-4976.4 µg/L for promethazine, 2.0-2153.2 µg/L for chlorpromazine, and 15.0-3088.0 µg/L for thioridazine, and correlation coefficients (r) were ≥0.995. The method was applied to the determination of phenothiazines in pig feed and pig tissue, and the average spiked recoveries were in the range 69.1-115.4%.

  8. Automated Analysis of Oxytocin by On-Line in-Tube Solid-Phase Microextraction Coupled with Liquid Chromatography-Tandem Mass Spectrometry

    Eri Moriyama


    Full Text Available A simple and sensitive method for the analysis of oxytocin was developed using automated on-line in-tube solid-phase microextraction (SPME coupled with liquid chromatography-tandem mass spectrometry (LC–MS/MS. Oxytocin was separated within 3 min on a Zorbax Eclipse XDB-C8 column, with water/methanol (10/90, v/v as the mobile phase at a flow rate of 0.2 mL min−1. Electrospray ionization conditions in the positive ion mode were optimized for MS/MS detection by multiple reaction monitoring. The optimum in-tube SPME conditions were 20 draw/eject cycles of 40 µL sample at a flow rate of 250 µL min−1 using a Supel-Q PLOT capillary column as an extraction device. The extracted oxytocin was easily desorbed from the capillary by passage of the mobile phase, and no carryover was observed. The calibration curves for oxytocin were linear (r = 0.9981 in the range of 0−5.0 ng mL−1, and the relative standard deviations at each point were below 14.7% (n = 3. The limit of detection of this method was 4.0 pg mL−1, and its sensitivity was 58-fold higher than that of the direct injection method. This method was applied successfully to the analysis of oxytocin in saliva samples without any other interference peaks.

  9. Ultraviolet vapor generation atomic fluorescence spectrometric determination of mercury in natural water with enrichment by on-line solid phase extraction

    Qin, Deyuan; Gao, Feng; Zhang, Zhaohui; Zhao, Liqian; Liu, Jixin; Ye, Jianping; Li, Junwei; Zheng, Fengxi


    A novel method, which coupled an on-line solid phase extraction (SPE) enrichment with ultraviolet vapor generation (UVG) atomic fluorescence spectrometry (AFS), was developed to improve the sensitivity of mercury determination and to remove the interference of some anion and organics to UVG of mercury. A high mercury retention efficiency and maximum exclusion of inorganic and organic matrix in water samples were achieved by using C18 SPE mini cartridge modified with sodium diethyldithiocarbamate (DDTC). Fast and efficient elution from the cartridge was found by using L-cysteine mixing solution. Furthermore, through the investigation of different UV reactor designs, the most important factor was the structure of the reactor (which corresponded roughly to the photon flux) wherein the tubing was sintered into the UV lamp to give the highest UV generation efficiency. The second factor was the materials of the tubing (which roughly corresponded to the working wavelength). Synthetic quartz, characterized by the highest transparency at 185 nm, attained the highest UVG efficiency, suggesting that the most favorable wavelength for UVG was 185 nm. Under optimum conditions, the achievable detection limit (3σ) with sample loadings of 10.0 mL was 0.03 ng L- 1 and 0.08 ng L- 1 with different manifolds, respectively. The method was successfully applied to the determination of Hg in tap water, river water and lake water samples.

  10. [Determination of estrogen residues in drinking water by on-line solid phase extraction based on sol-gel technique coupled with high performance liquid chromatography].

    Li, Longfei; Su, Min; Shi, Xiaolei; Wang, Yana; Wang, Minmin; He, Jinxing


    A method for the determination of diethylstilbestrol (DES), hexestrol (HEX) and dienestrol (DS) residues in drinking water was established by on-line solid phase extraction (SPE) coupled with high performance liquid chromatography (HPLC). The material synthesized on the base of sol-gel technology was employed as adsorbent. This material was prepared using 3-aminopropyltriethoxysilane (APTES) as the functional monomer, tetraethoxysilane (TEOS) as the crosslinking agent, and acetic acid as the initiator. The synthesized adsorbent showed outstanding property for the estrogen extraction. The estrogen can be caught effectively from water samples and the extraction can be achieved rapidly. Some important parameters, such as pH of sample solution, eluent solvents, loading flow rate, which might influence extraction efficiency, were optimized. The results indicated that the limit of detection (S/N = 3) of the developed method could reach 0.07-0.13 microg/L under the conditions of pH 7.0 of sample solution, methanol and 1% (v/v) acetic acid aqueous solution as the eluent solvent and the loading flow rate of 2 mL/min. The recoveries of the three estrogens from the water samples at three spiked levels ranged from 82.31% to 99.43% with RSD of 1.61%-7.15%. The method was simple, rapid, and suitable to detect the trace residues of estrogens in drinking water.

  11. Automated determination of total captopril in urine by liquid chromatography with post-column derivatization coupled to on-line solid phase extraction in a sequential injection manifold.

    Karakosta, Theano D; Tzanavaras, Paraskevas D; Themelis, Demetrius G


    The present study reports a new liquid chromatographic (HPLC) method for the determination of the anti-hypertension drug captopril (CAP) in human urine. After its separation from the sample matrix in a reversed phase HPLC column, CAP reacts with the thiol-selective reagent ethyl-propiolate (EP) in a post-column configuration and the formed thioacrylate derivative is detected at 285 nm. Automated 4-fold preconcentration of the analyte prior to analysis was achieved by an on-line solid phase extraction (SPE) step using a sequential injection (SI) manifold. The Oasis HLB SPE cartridges offered quantitative recoveries and effective sample cleaning by applying a simple SPE protocol. The limits of detection and quantitation were 10 μg L(-1) and 35 μg L(-1) respectively. The percent recoveries for the analysis of human urine samples ranged between 90 and 96% and 95 and 104% using aqueous and matrix matched calibration curves respectively. Copyright © 2011 Elsevier B.V. All rights reserved.

  12. On-line monitoring of the photocatalytic degradation of 2,4-D and dicamba using a solid-phase extraction-multisyringe flow injection system.

    Chávez-Moreno, Carmín; Ferrer, Laura; Hinojosa-Reyes, Laura; Hernández-Ramírez, Aracely; Cerdà, Víctor; Guzmán-Mar, Jorge


    A fully automated on-line system for monitoring the photocatalytic degradation of herbicides was developed using multisyringe flow injection analysis (MSFIA) coupled to a solid phase extraction (SPE) unit with UV detection. The calibration curves were linear in the concentration range of 100-1000 μg L(-1) for 3,6-dichloro-2-methoxybenzoic acid (dicamba) and 500-3000 μg L(-1) for 2,4-dichlorophenoxyacetic acid (2,4-D), while the detection limits were 30 and 135 μg L(-1) for dicamba and 2,4-D, respectively. The monitoring of the photocatalytic degradation (TiO2 anatase/UV 254 nm) of these two herbicides was performed by MSFIA-SPE system using a small sample volume (2 mL) in a fully automated approach. The degradation was assessed in ultrapure and drinking water with initial concentrations of 1000 and 2000 μg L(-1) for dicamba and 2,4-D, respectively. Degradation percentages of approximately 85% were obtained for both herbicides in ultrapure water after 45 min of photocatalytic treatment. A similar degradation efficiency in drinking water was observed for 2,4-D, whereas dicamba exhibited a lower degradation percentage (75%), which could be attributed to the presence of inorganic species in this kind of water. Copyright © 2013 Elsevier Ltd. All rights reserved.

  13. Automated on-line in-tube solid-phase microextraction-assisted derivatization coupled to liquid chromatography for quantifying residual dimethylamine in cationic polymers.

    Prieto-Blanco, M C; Cháfer-Pericás, C; López-Mahía, P; Campíns-Falcó, P


    A method for the analysis of dimethylamine (DMA) by automated in-tube solid-phase microextraction (IT-SPME)-supported chemical derivatization coupled with high-performance liquid chromatography was developed. Extraction, derivatization and desorption were studied by using a capillary coated with 95% polydimethylsiloxane and 5% polydiphenylsiloxane. Solution derivatization and automated IT-SPME derivatization using 9-fluorenylmethyl chloroformate (FMOC) were compared. The proposed procedure provided adequate linearity, accuracy and precision in the 0.2-2.0 microg/mL concentration interval, and the limit of detection (LOD) was 50 ng/mL. The main advantages of the proposed procedure are: (i) no off-line sample manipulation, (ii) rapidity, as the total analysis time is about 10 min, (iii) specificity for the samples assayed, (iv) minimal consumption of FMOC reagent and (v) minimal residues. Therefore, the proposed method is an environmental-friendly and cost-effective alternative for the control of residual DMA in polymeric cationic surfactants used like flocculants in water treatment.

  14. Determination of biocides and pesticides by on-line solid phase extraction coupled with mass spectrometry and their behaviour in wastewater and surface water

    Singer, Heinz; Jaus, Sylvia; Hanke, Irene; Lueck, Alfred; Hollender, Juliane [Eawag, Swiss Federal Institute of Aquatic Science and Technology, Ueberlandstrasse 133, CH-8600 Duebendorf (Switzerland); Alder, Alfredo C., E-mail: alfredo.alder@eawag.c [Eawag, Swiss Federal Institute of Aquatic Science and Technology, Ueberlandstrasse 133, CH-8600 Duebendorf (Switzerland)


    This study focused on the input of hydrophilic biocides into the aquatic environment and on the efficiency of their removal in conventional wastewater treatment by a mass flux analysis. A fully automated method consisting of on-line solid phase extraction coupled to LC-ESI-MS/MS was developed and validated for the simultaneous trace determination of different biocidal compounds (1,2-benzisothiazoline-3-one (BIT), 3-Iodo-2-propynylbutyl-carbamate (IPBC), irgarol 1051 and 2-N-octyl-4-isothiazolinone (octhilinone, OIT), carbendazim, diazinon, diuron, isoproturon, mecoprop, terbutryn and terbutylazine) and pharmaceuticals (diclofenac and sulfamethoxazole) in wastewater and surface water. In the tertiary effluent, the highest average concentrations were determined for mecoprop (1010 ng/L) which was at comparable levels as the pharmaceuticals diclofenac (690 ng/L) and sulfamethoxazole (140 ng/L) but 1-2 orders of magnitude higher than the other biocidal compounds. Average eliminations for all compounds were usually below 50%. During rain events, increased residual amounts of biocidal contaminants are discharged to receiving surface waters. - Incomplete removal of biocides and pesticides during wastewater treatment.

  15. Development of a solid phase extraction method for the simultaneous determination of steroid hormones in H295R cell line using liquid chromatography-tandem mass spectrometry.

    Abdel-Khalik, Jonas; Björklund, Erland; Hansen, Martin


    The H295R in vitro cell line produces the majority of the steroidogenesis, for which reason it is commonly used as a screening tool for endocrine disrupting chemicals. Simultaneous determination of the precursor cholesterol and key steroid hormones could give a broad insight into the mechanistic disruption of the steroidogenesis. Steroid hormones have primarily been extracted from H295R incubation medium by means of liquid-liquid extraction (LLE) and the obtained recoveries and matrix effects have typically not been stated or assessed. In the present study a solid-phase extraction (SPE) method was developed and validated for the simultaneous extraction of cholesterol and five key steroid hormones pregnenolone, 17-hydroxyprogesterone, testosterone, cortisol and aldosterone from H295R incubation medium, and finally detected by LC-MS/MS. Cholesterol was recovered at a level of 55.7%, while steroid hormone recoveries ranged from 98.2 to 109.4%. Matrix effects varied between -0.6% and 62.8%. Intra-day precision was deemed acceptable, but the inter-day precision for pregnenolone and aldosterone exceeded the precision limit of 15% RSD. Although LLE has been the most frequently used extraction method in H295R studies, however, our investigation has shown that SPE may relatively easily extract and recover steroid hormones, potentially replacing LLE.

  16. [Determination of 28 organochlorine and pyrethroid pesticides in pine nuts using solid-phase extraction and on-line gel permeation chromatography-gas chromatography/mass spectrometry].

    Kang, Qinghe; Wu, Yan; Gao, Kaiyang; Li, Zhibin


    An analytical method has been developed for the determination of 28 organochlorine pesticides and pyrethroid pesticides in pine nuts. The sample was extracted With acetonitrile-water (4:1, v/v) as the extraction solution by means of high-speed homogenization. The crude extract was purified by an Aluminium-N solid phase extraction column to remove most of the fat and sterols in the sample, then on-line gel permeation chromatography-gas chromatography/ mass spectrometry (GPC-GC/MS) analysis was performed. The recoveries for the most of pesticides in the sample spiked with the standards of 0.05 mg/kg were 70%-120%, and the relative standard deviations were less than 15%. The limits of detection of 28 organochlorine pesti- and pyrethroid pesticides were 0.002-0.05 mg/kg. The linear relationship and the recovery results were satisfactory. The method is rapid, accurate, highly senstive, and can be used for the simultaneous determination of pesticide residues in pine nuts.

  17. Trends in nutrients and suspended solids at the Fall Line of five tributaries to the Chesapeake Bay in Virginia, July 1988 through June 1995

    Bell, C.F.; Belval, D.L.; Campbell, J.P.


    Water-quality samples were collected at the Fall Line of five tributaries to the Chesapeake Bay in Virginia during a 6- to 7-year period. The water-quality data were used to estimate loads of nutrients and suspended solids from these tributaries to the non-tidal part of Chesapeake Bay Basin and to identify trends in water quality. Knowledge of trends in water quality is required to assess the effectiveness of nutrient manage- ment strategies in the five basins. Multivariate log-linear regression and the seasonal Kendall test were used to estimate flow-adjusted trends in constituent concentration and load. Results of multivariate log-linear regression indicated a greater number of statistically significant trends than the seasonal Kendall test; how-ever, when both methods indicated a significant trend, both agreed on the direction of the trend. Interpre- tation of the trend estimates for this report was based on results of the parametric regression method. No significant trends in total nitrogen concentration were detected at the James River monitoring station from July 1988 through June 1995, though total Kjeldahl nitrogen concen- tration decreased slightly in base-flow samples. Total phosphorus concentration decreased about 29 percent at this station during the sampling period. Most of the decrease can be attributed to reductions in point-source phosphorus loads in 1988 and 1989, especially the phosphate detergent ban of 1988. No significant trends in total suspended solids were observed at the James River monitoring station, and no trends in runoff- derived constituents were interpreted for this river. Significant decreases were detected in concentrations of total nitrogen, total Kjeldahl nitrogen, dissolved nitrite-plus-nitrate nitrogen, and total suspended solids at the Rappahannock River monitoring station between July 1988 and June 1995. A similar downward trend in total phosphorus concentration was significant at the 90-percent confidence level, but not the

  18. Molecularly imprinted sol-gel nanofibers based solid phase microextraction coupled on-line with high performance liquid chromatography for selective determination of acesulfame.

    Moein, Mohammad Mahdi; Javanbakht, Mehran; Karimi, Mohammad; Akbari-adergani, Behrouz


    Sol-gel based molecularly imprinted polymer (MIP) nanofiber was successfully fabricated by electrospinning technique on the surface of a stainless steel bar. The manufactured tool was applied for on-line selective solid phase microextraction (SPME) and determination of acesulfame (ACF) as an artificial sweetener with high performance liquid chromatography (HPLC). The selective ability of method for the extraction of ACF was investigated in the presence of some selected sweeteners such as saccharine (SCH), aspartame (ASP) and caffeine (CAF). Electrospinning of MIP sol-gel solution on the stainless steel bar provided an unbreakable sorbent with high thermal, mechanical, and chemical stability. Moreover, application of the MIP-SPME tool revealed a unique approach for the selective microextraction of the analyte in beverage samples. In this work, 3-(triethoxysilyl)-propylamine (TMSPA) was chosen as a precursor due to its ability to imprint the analyte by hydrogen bonding, Van der Walls, and dipole-dipole interactions. Nylon 6 was also added as a backbone and support for the precursor in which sol could greatly growth during the sol-gel process and makes the solution electrospinable. Various effective parameters in the extraction efficiency of the MIP-SPME tool such as loading time, flow rate, desorption time, selectivity, and the sample volume were evaluated. The linearity for the ACF in beverage sample was in the range of 0.78-100.5 ng mL(-1). Limit of detection (LOD) and quantification (LOQ) were 0.23 and 0.78 ng mL(-1) respectively. The RSD values (n=5) were all below 3.5%at the 20 ng mL(-1) level.

  19. On-line preconcentration and determination of tetracycline residues in milk using solid-phase extraction in conjunction with flow injection spectrophotometry

    Prinya Masawat


    Full Text Available A simple, cheap and highly sensitive system with on-line preconcentration using solid-phase extraction in conjunction with flow injection spectrophotometry for the determination of tetracycline residues in milk samples is described. C18 was used as packing material in a designed minicolumn used for preconcentration of tetracyclines. Tetracycline standard or sample solutions were dissolved in a mixed buffer solution of pH 4.0 containing boric acid, citric acid and sodium phosphate, then loaded to the minicolumn for 6 min followed by elution with a solution containing methanol : mixed buffer solution (40:60 by volume of pH 6.5 The absorbance of the eluate was measured at 370 nm. The calibration graph was linear in the range of 0.20-1.00, 0.20-4.00, and 0.20-1.00 mg L-1 for tetracycline (TC, oxytetracycline (OTC, and chlortetracycline (CTC respectively. The limits of detection were 0.08, 0.10, and 0.09mg L-1 for TC, OTC, and CTC respectively. Relative standard deviations for 20 replicated determinations of 0.20, 0.40, and 0.60 mg L-1 of TC were 7.03, 7.23, and 6.55 % respectively. Per cent recoveries for four commercial types of milk: U.H.T., pasteurised, raw, and sterilised milk were in the range of 86–109 (TC, 90–109 (OTC, and 89–108 (CTC. The sample throughput was 6 h-1.

  20. Preparation and evaluation of open tubular C18-silica monolithic microcartridges for preconcentration of peptides by on-line solid phase extraction capillary electrophoresis.

    Ortiz-Villanueva, Elena; Benavente, Fernando; Giménez, Estela; Yilmaz, Fatma; Sanz-Nebot, Victoria


    In this study, C18-silica monoliths were synthesized as a porous layer in open tubular capillary columns, to be cut later into microcartridges for the analysis of neuropeptides by on-line solid-phase extraction capillary electrophoresis with UV and MS detection (SPE-CE-UV and SPE-CE-MS). First, several types of C18-silica monolithic (MtC18) microcartridges were used to analyse standard solutions of five neuropeptides (i.e. dynorphin A (1-7), substance P (7-11), endomorphin 1, methionine enkephalin and [Ala]-methionine enkephalin). The MtC18 sorbents were especially selective against endomorphin 1 and substance P (7-11)). The best results in terms of sensitivity and inter-microcartridge reproducibility were achieved with the microcartridges obtained from a 10-cm open tubular capillary column with a thin monolithic coating with large through-pores (1-5μm). Run-to-run repeatability, microcartridge durability, linearity ranges and LODs were studied by MtC18-SPE-CE-MS. As expected due to their greater selectivity, the best LOD enhancement was obtained for End1 and SP (7-11) (50 times with regard to CE-MS). Finally, the suitability of the methodology for analysing biological fluids was tested with plasma samples spiked with End1 and SP (7-11). Results obtained were promising because both neuropeptides could be detected at 0.05μgmL(-1), which was almost the same concentration level as for the standard solutions (0.01μgmL(-1)).

  1. Occurrence of the herbicide glyphosate and its metabolite AMPA in surface waters in Switzerland determined with on-line solid phase extraction LC-MS/MS.

    Poiger, Thomas; Buerge, Ignaz J; Bächli, Astrid; Müller, Markus D; Balmer, Marianne E


    Glyphosate is currently one of the most important herbicides worldwide. Its unique properties provide for a wide range of uses in agriculture but also in non-agricultural areas. At the same time, its zwitterionic nature prevents the inclusion in multi-residue analytical methods for environmental monitoring. Consequently, despite its extensive use, data on occurrence of glyphosate in the aquatic environment is still scarce. Based on existing methods, we developed a simplified procedure for the determination of glyphosate and its main metabolite aminomethylphosphonic acid (AMPA) in water samples using derivatization with fluorenylmethyl chloroformate FMOC-Cl, combined with on-line solid phase extraction and liquid chromatography-tandem mass spectrometry (LC-MS/MS) detection. This method was extensively tested on over 1000 samples of surface water, groundwater, and treated wastewater and proved to be simple, sensitive, and reliable. Limits of quantification of 0.005 μg/L were routinely achieved. Glyphosate and AMPA were detected in the vast majority of stream water samples in the area of Zurich, Switzerland, with median concentrations of 0.11 and 0.20 μg/L and 95th percentile concentrations of 2.1 and 2.6 μg/L, respectively. Stream water data and data from treated wastewater indicated that non-agricultural uses may significantly contribute to the overall loads of glyphosate and AMPA in surface waters. In the investigated groundwater samples, selected specifically because they had shown presence of other herbicides in previous monitoring programs, glyphosate and AMPA were generally not detected, except for two monitoring sites in Karst aquifers, indicating that these compounds show much less tendency for leaching.

  2. Identification of a panel of tumor-associated antigens from breast carcinoma cell lines, solid tumors and testis cDNA libraries displayed on lambda phage

    Cianfriglia Maurizio


    Full Text Available Abstract Background Tumor-associated antigens recognized by humoral effectors of the immune system are a very attractive target for human cancer diagnostics and therapy. Recent advances in molecular techniques have led to molecular definition of immunogenic tumor proteins based on their reactivity with autologous patient sera (SEREX. Methods Several high complexity phage-displayed cDNA libraries from breast carcinomas, human testis and breast carcinoma cell lines MCF-7, MDA-MB-468 were constructed. The cDNAs were expressed in the libraries as fusion to bacteriophage lambda protein D. Lambda-displayed libraries were efficiently screened with sera from patients with breast cancer. Results A panel of 21 clones representing 18 different antigens, including eight proteins of unknown function, was identified. Three of these antigens (T7-1, T11-3 and T11-9 were found to be overexpressed in tumors as compared to normal breast. A serological analysis of the 21 different antigens revealed a strong cancer-related profile for at least five clones (T6-2, T6-7, T7-1, T9-21 and T9-27. Conclusions Preliminary results indicate that patient serum reactivity against five of the antigens is associated with tumor disease. The novel T7-1 antigen, which is overexpressed in breast tumors and recognized specifically by breast cancer patient sera, is potentially useful in cancer diagnosis.

  3. Determination of As(III) and total inorganic As in water samples using an on-line solid phase extraction and flow injection hydride generation atomic absorption spectrometry

    Sigrist, Mirna, E-mail: [Laboratorio Central, Facultad de Ingenieria Quimica, Universidad Nacional del Litoral, Santiago del Estero 2654-Piso 6, (3000) Santa Fe (Argentina); Albertengo, Antonela; Beldomenico, Horacio [Laboratorio Central, Facultad de Ingenieria Quimica, Universidad Nacional del Litoral, Santiago del Estero 2654-Piso 6, (3000) Santa Fe (Argentina); Tudino, Mabel [Laboratorio de Analisis de Trazas, Departamento de Quimica Inorganica, Analitica y Quimica Fisica/INQUIMAE, Facultad de Ciencias Exactas y Naturales, Pabellon II, Ciudad Universitaria (1428), Buenos Aires (Argentina)


    A simple and robust on-line sequential injection system based on solid phase extraction (SPE) coupled to a flow injection hydride generation atomic absorption spectrometer (FI-HGAAS) with a heated quartz tube atomizer (QTA) was developed and optimized for the determination of As(III) in groundwater without any kind of sample pretreatment. The method was based on the selective retention of inorganic As(V) that was carried out by passing the filtered original sample through a cartridge containing a chloride-form strong anion exchanger. Thus the most toxic form, inorganic As(III), was determined fast and directly by AsH{sub 3} generation using 3.5 mol L{sup -1} HCl as carrier solution and 0.35% (m/v) NaBH{sub 4} in 0.025% NaOH as the reductant. Since the uptake of As(V) should be interfered by several anions of natural occurrence in waters, the effect of Cl{sup -}, SO{sub 4}{sup 2-}, NO{sub 3}{sup -}, HPO{sub 4}{sup 2-}, HCO{sub 3}{sup -} on retention was evaluated and discussed. The total soluble inorganic arsenic concentration was determined on aliquots of filtered samples acidified with concentrated HCl and pre-reduced with 5% KI-5% C{sub 6}H{sub 8}O{sub 6} solution. The concentration of As(V) was calculated by difference between the total soluble inorganic arsenic and As(III) concentrations. Detection limits (LODs) of 0.5 {mu}g L{sup -1} and 0.6 {mu}g L{sup -1} for As(III) and inorganic total As, respectively, were obtained for a 500 {mu}L sample volume. The obtained limits of detection allowed testing the water quality according to the national and international regulations. The analytical recovery for water samples spiked with As(III) ranged between 98% and 106%. The sampling throughput for As(III) determination was 60 samples h{sup -1}. The device for groundwater sampling was especially designed for the authors. Metallic components were avoided and the contact between the sample and the atmospheric oxygen was carried to a minimum. On-field arsenic species

  4. (Hydro-Quebec) Illustrated vocabulary representing power line transmission and distribution of electric power. 4, maintenance. (Hydro-Quebec) Vocabulaire illustre des lignes aeriennes de transport et de distribution d'electricite. Fascicule 4, entretien


    This dictionary is intended to help standardize the terminology used among Hydro-Quebec personnel involved with power lines. This volume is concerned with words applicable to power line maintenance, and is arranged in six parts: poles and link sticks, adapters and related tools, safety devices, safety clothing and climbing equipment, measurement and control devices, and techniques. Virtually all of the terms are illustrated. English language equivalents are given, but these are not standardized terms and are included for informative purposes only. English and French indexes are included. 184 refs., 256 figs.

  5. A recombinant CHSE-214 cell line expressing an Mx1 promoter-reporter system responds to both interferon type I and type II from salmonids and represents a versatile tool to study the IFN-system in teleost fish.

    Jørgensen, Jorunn B; Johansen, Audny; Hegseth, Marit N; Zou, Jun; Robertsen, Børre; Collet, Bertrand; Secombes, Christopher J


    A transgenic cell line for the detection of salmon interferons (IFNs) has been established. It is based on a CHSE-214 cell line containing a reporter construct expressing firefly luciferase under the control of the rainbow trout promoter for the IFN-induced Mx1 gene. This cell line, named CHSE-Mx10, showed IFN-induced luciferase expression after more than 80 passages, confirming the stability of this cell line. Interestingly, the Mx promoter was shown to respond to both salmon IFN-alpha/beta and trout IFN-gamma in a dose-dependent manner, while there was no response to TNF-alpha and IL-1beta. IFN-alpha/beta activity could be measured at a range of 9-150 U/ml, and IFN-gamma showed activity between 10 and 100 ng/ml. The reproducibility of both responses was good. The CHSE-Mx10 reporter system constitutes a versatile tool to study the induction and regulation of IFN signaling in teleost fish. A preliminary study presented herein suggests that both infectious pancreas necrosis virus (IPNV) and salmon pancreas disease virus (SPDV) may block activation of the Mx promoter in CHSE-Mx10 stimulated with IFN-alpha/beta.

  6. Solid State Research


    intermediate-field Meissner region, and high-field Bean model . The solid line is a fit of RsM = a + b(f,T)Hrf 2 to the results in the Meissner region...model the results: low-field weak links, intermediate-field Meissner region, and high-field Bean model The solid line is a fit of R1 M-- a + b (f T) Hff

  7. On-line coupling of solid-phase extraction with mass spectrometry for the analysis of biological samples III. Determination of prednisolone in serum

    van Hout, M.W.J.; Hofland, C.M; Niederlander, H.A G; Bruins, A.P.; de Zeeuw, R.A.; de Jong, G.J.


    Solid-phase extraction (SPE) was directly coupled to mass spectrometry (MS) to assess the feasibility of the system for the rapid determination of prednisolone in serum. A C-18 stationary phase allowed washing of the cartridge with 25% methanol. Elution was performed by switching the methanol

  8. On-line coupling of solid-phase extraction with mass spectrometry for the analysis of biological samples III. Determination of prednisolone in serum

    van Hout, MWJ; Hofland, CM; Niederlander, HAG; Bruins, AP; de Zeeuw, RA; de Jong, GJ


    Solid-phase extraction (SPE) was directly coupled to mass spectrometry (MS) to assess the feasibility of the system for the rapid determination of prednisolone in serum. A C-18 stationary phase allowed washing of the cartridge with 25% methanol. Elution was performed by switching the methanol percen

  9. Dynamic liquid-liquid-solid microextraction based on molecularly imprinted polymer filaments on-line coupling to high performance liquid chromatography for direct analysis of estrogens in complex samples.

    Zhong, Qisheng; Hu, Yufei; Hu, Yuling; Li, Gongke


    A novel sample preparation technique termed dynamic liquid-liquid-solid microextraction (DLLSME) was developed and on-line coupled to high performance liquid chromatography (HPLC) for direct extraction, desorption, and analysis of trace estrogens in complex samples. The DLLSME consists of the aqueous donor phase, the organic medium phase and the molecularly imprinted polymer filaments (MIPFs) as solid acceptor phase. The organic solvent with lesser density was directly added on top of the aqueous sample, and the dynamic extraction was performed by circulating the organic solvent through the MIPFs inserted into a PEEK tube which served as an extraction and desorption chamber. Afterwards, the extracted analytes on the MIPFs were on-line desorbed and then introduced into the HPLC for analysis. To evaluate the feasibility of the on-line system, a new DLLSME-HPLC method was developed for the analysis of five estrogens in aqueous samples by using 17β-estradiol MIPFs as the solid phase. Under the optimized conditions, the enrichment factors of 51-70, limits of detection of 0.08-0.25 μg/L and precision within 4.5-6.9% were achieved. Furthermore, the proposed method was applied to the analysis of real samples including urine, milk and skin toner, satisfactory recovery (81.9-99.8%) and reproducibility (4.1-7.9%) were obtained. Especially, 0.59 μg/L of 17β-estradiol was determined in female urine sample. The DLLSME offers an attractive alternative for direct analysis of trace analytes in aqueous samples and could potentially be extended to other adsorptive materials.

  10. Simultaneous speciation of inorganic arsenic and antimony in water samples by hydride generation-double channel atomic fluorescence spectrometry with on-line solid-phase extraction using single-walled carbon nanotubes micro-column

    Wu Hong, E-mail:; Wang Xuecui; Liu Bing; Liu Yueling; Li Shanshan; Lu Jusheng; Tian Jiuying; Zhao Wenfeng; Yang Zonghui


    A new method was developed for the simultaneous speciation of inorganic arsenic and antimony in water by on-line solid-phase extraction coupled with hydride generation-double channel atomic fluorescence spectrometry (HG-DC-AFS). The speciation scheme involved the on-line formation and retention of the ammonium pyrrolidine dithiocarbamate complexes of As(III) and Sb(III) on a single-walled carbon nanotubes packed micro-column, followed by on-line elution and simultaneous detection of As(III) and Sb(III) by HG-DC-AFS; the total As and total Sb were determined by the same protocol after As(V) and Sb(V) were reduced by thiourea, with As(V) and Sb(V) concentrations obtained by subtraction. Various experimental parameters affecting the on-line solid-phase extraction and determination of the analytes species have been investigated in detail. With 180 s preconcentration time, the enrichment factors were found to be 25.4 for As(III) and 24.6 for Sb(III), with the limits of detection (LODs) of 3.8 ng L{sup -1} for As(III) and 2.1 ng L{sup -1} for Sb(III). The precisions (RSD) for five replicate measurements of 0.5 {mu}g L{sup -1} of As(III) and 0.2 {mu}g L{sup -1} of Sb(III) were 4.2 and 4.8%, respectively. The developed method was validated by the analysis of standard reference materials (NIST SRM 1640a), and was applied to the speciation of inorganic As and Sb in natural water samples.

  11. On-line solid phase extraction using the Prospekt-2 coupled with a liquid chromatography/tandem mass spectrometer for the determination of dextromethorphan, dextrorphan and guaifenesin in human plasma.

    Kuhlenbeck, Debbie L; Eichold, Thomas H; Hoke, Steven H; Baker, Timothy R; Mensen, Robert; Wehmeyer, Kenneth R


    An on-line liquid chromatography/tandem mass spectrometry (LC-MS/MS) procedure, using the Prospekt- 2 system, was developed and used for the determination of the levels of the active ingredients of cough/cold medications in human plasma matrix. The experimental configuration allows direct plasma injection by performing on- line solid phase extraction (SPE) on small cartridge columns prior to elution of the analyte(s) onto the analytical column and subsequent MS/MS detection. The quantitative analysis of three analytes with differing polarities, dextromethorphan (DEX), dextrorphan (DET) and guaifenesin (GG) in human plasma presented a significant challenge. Using stable-isotope-labeled internal standards for each analyte, the Prospekt-2 on-line methodology was evaluated for sensitivity, suppression, accuracy, precision, linearity, analyst time, analysis time, cost, carryover and ease of use. The lower limit of quantitation for the on-line SPE procedure for DEX, DET and GG was 0.05, 0.05 and 5.0 ng mL(-1), respectively, using a 0.1 mL sample volume. The linear range for DEX and DET was 0.05-50 ng mL(-1) and was 5-5,000 ng mL(-1) for GG. Accuracy and precision data for five different levels of QC samples were collected over three separate days. Accuracy ranged from 90% to 112% for all three analytes, while the precision, as measured by the %RSD, ranged from 1.5% to 16.0%

  12. Influence of detachment procedure and diet on recovery of solid-associated bacteria from sheep ruminal digesta and representativeness of bacterial isolates as assessed by automated ribosomal intergenic spacer analysis-polymerase chain reaction.

    Ramos, S; Tejido, M L; Ranilla, M J; Martínez, M E; Saro, C; Carro, M D


    Six ruminally and duodenally cannulated sheep were used in a partially replicated 4 x 4 Latin square experiment designed to evaluate the efficiency of 3 detachment procedures (DP) to recover solid-associated bacteria (SAB) from ruminal digesta. The 4 experimental diets contained forage to concentrate (F:C) ratios of 70:30 or 30:70 with either alfalfa hay or grass hay as the forage. Bacterial biomass was labeled with 15NH4Cl. The DP were 1) MET: digesta was incubated at 38 degrees C for 15 min with saline solution (0.9% NaCl) containing 0.1% methylcellulose under continuous shaking; 2) STO: digesta was mixed with cold saline solution and homogenized with a stomacher for 5 min at 230 rpm; 3) FRE: digesta was immediately frozen at -20 degrees C for 72 h, thawed at 4 degrees C, mixed with saline solution and subjected to STO procedure. Common to all treatments was storing at 4 degrees C for 24 h after the treatment, homogenization, filtration, and resuspension of digesta 2 times in the treatment solutions. The automated ribosomal intergenic spacer analysis of the 16S ribosomal DNA was used to analyze the similarity between bacterial communities attached to the digesta and those in the pellet obtained after each DP. There were no significant F:C x DP or forage x DP interactions for any variable. On average, STO treatment detached 65.8% of SAB from ruminal digesta, about 1.2 and 1.5 times more than FRE and MET treatments, respectively. Total recovery of SAB in STO pellets (48.9%) was greater compared with FRE (31.7%) and MET (33.1%), values being greater for high-forage compared with high-concentrate diets. Similarity index between the bacteria attached to digesta and those in the pellets were lower for FRE (48.2%) compared with MET (54.1%) and STO (54.1%), which suggests that FRE could have destroyed cell integrity of some bacterial species, thus reducing the bacterial diversity present in the pellets. The STO method was the most effective removing SAB from digesta, but

  13. Generic on-line solid phase extraction sample preparation strategies for the analysis of drugs in biological matrices by LC-MS/MS.

    Bourgogne, Emmanuel; Grivet, Chantal; Varesio, Emmanuel; Hopfgartner, Gérard


    In the present work we investigate the integration of a single hardware platform (Prospekt-2) allowing on-line SPE with pre-/post-trapping dilution and direct injection of plasma extracts, and also compare the benefits and challenges of the different approaches for pharmaceutical drugs with heterogeneous physicochemical properties. In the first part, the generic use of on-line SPE with direct plasma injection or after protein precipitation was investigated for the quantitative analysis of talinolol. In the second part, pre-trapping and post-trapping dilution for on-line SPE is discussed for generic method development on an oxadiazole and its major metabolite. Finally, the difference of performance between direct plasma injection vs. off-line liquid-liquid extraction is also described for the quantification of buprenorphine and naltrexone down to 50 and 100 pg/ml using a 0.25 ml plasma aliquot. All assays were in human plasma and detection was performed by mass spectrometry detection either on simple or triple stage quadrupoles. Regardless of the tested strategy, assays were found linear, with precision and accuracy with <15% for all quality controls samples and <20% for lower limit of quantitation.

  14. List of Accredited Representatives

    Department of Veterans Affairs — VA accreditation is for the sole purpose of providing representation services to claimants before VA and does not imply that a representative is qualified to provide...

  15. The representative animal

    Harrison, J M


    The anthropocentric approach to the study of animal behavior uses representative nonhuman animals to understand human behavior. This approach raises problems concerning the comparison of the behavior of two different species. The datum of behavior analysis is the behavior of humans and representative animal phenotypes. The behavioral phenotype is the product of the ontogeny and phylogeny of each species, and this requires that contributions of genotype as well as behavioral history to experim...

  16. [Advance directives. Representatives' opinions].

    Busquets I Font, J M; Hernando Robles, P; Font I Canals, R; Diestre Ortin, G; Quintana, S

    The use and usefulness of Advance Directives has led to a lot of controversy about their validity and effectiveness. Those areas are unexplored in our country from the perspective of representatives. To determine the opinion of the representatives appointed in a registered Statement of Advance Directives (SAD) on the use of this document. Telephone survey of representatives of 146 already dead people and who, since February 2012, had registered a SAD document. More the two-thirds (98) of respondents recalled that the SAD was consulted, with 86 (58.9%) saying that their opinion as representative was consulted, and 120 (82.1%) believe that the patient's will was respected. Of those interviewed, 102 (69.9%) believe that patients who had previously planned their care using a SAD had a good death, with 33 (22.4%) saying it could have been better, and 10 (6.9%) believe they suffered greatly. The SAD were mostly respected and consulted, and possibly this is related to the fact that most of the representatives declare that the death of those they represented was perceived as comfortable. It would be desirable to conduct further studies addressed at health personnel in order to know their perceptions regarding the use of Advance Directives in the process of dying. Copyright © 2016 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

  17. Lines of Blaschko.

    Bolognia, J L; Orlow, S J; Glick, S A


    The lines of Blaschko represent a pattern followed by many skin disorders. We review the clinical and histologic features of X-linked, congenital/nevoid, and acquired skin diseases that follow these lines. We also include cutaneous disorders that have a linear distribution but do not follow Blaschko's lines. Finally, we differentiate Blaschko's lines from other patterns on the skin such as dermatomes and Langer's lines.

  18. Extraction and analysis of pollutant organics from contaminated solids using off-line supercritical fluid extraction (SFE) and on-line SFE-infrared spectroscopy. Task 2. Semiannual report, November 1995--March 1996

    Hawthorne, S.B.


    This document describes activities in the following tasks associated with a project on environmental management technology decontamination and commercialization: A commercialized version of a field-portable instrument for performing supercritical fluid extraction (SFE) with on-line Fourier transform infrared (FT-IR) detection;pyrolysis of plastic wastes associated with mixtures of radioactive wastes;management and reporting activities; centrifugal membrane filtration with application to tank waste remediation; technology development integration activities associated with remedial action and waste management.

  19. Extraction and analysis of pollutant organics from contaminated solids using off-line supercritical fluid extraction (SFE) and on-line SFE-infrared spectroscopy. Task 2. Semiannual report, November 1995--March 1996

    Hawthorne, S.B.


    This document describes activities in the following tasks associated with a project on environmental management technology decontamination and commercialization: A commercialized version of a field-portable instrument for performing supercritical fluid extraction (SFE) with on-line Fourier transform infrared (FT-IR) detection;pyrolysis of plastic wastes associated with mixtures of radioactive wastes;management and reporting activities; centrifugal membrane filtration with application to tank waste remediation; technology development integration activities associated with remedial action and waste management.

  20. Thermal conductivity determinations on solid rock - a comparison between a steady-state divided-bar apparatus and a commercial transient line-source device

    Sass, J.H.; Stone, C.; Munroe, R.J.


    Two apparatuses were used to measure thermal conductivities on pairs of contiguous samples from 17 specimens of solid rock: the USGS divided-bar apparatus, a steadystate comparative method, and the Shotherm "Quick Thermal Meter" (QTM), which employs a transient strip heat source. Both devices were calibrated relative to fused silica. Both devices have a reproducibility of ??5% or better depending, to some extent, on the physical nature of the specimen being tested. For solid rocks, specimen preparation for the divided bar is much more tedious and expensive than for the QTM, which seems insensitive to minor surface roughness. The QTM does, however, require quite large specimens (30 mm ?? 60 mm ?? 100 mm as a minimum for rocks) with even larger specimens (50 mm ?? 100 mm ?? 100 mm) required for higher conductivity material (3.5 W m-1 K-1 and greater). Experimental times are comparable; however, the QTM is a self-contained unit that can be transported easily and set up quickly and requires no more space than a standard desk top. From a formal statistical comparison, it appears that, over a large range of conductivities (1.4 to ???5 W m-1 K-1) and rock types, the two instruments will yield the same value of thermal conductivity for isotropic rocks. ?? 1984.

  1. Representing properties locally.

    Solomon, K O; Barsalou, L W


    Theories of knowledge such as feature lists, semantic networks, and localist neural nets typically use a single global symbol to represent a property that occurs in multiple concepts. Thus, a global symbol represents mane across HORSE, PONY, and LION. Alternatively, perceptual theories of knowledge, as well as distributed representational systems, assume that properties take different local forms in different concepts. Thus, different local forms of mane exist for HORSE, PONY, and LION, each capturing the specific form that mane takes in its respective concept. Three experiments used the property verification task to assess whether properties are represented globally or locally (e.g., Does a PONY have mane?). If a single global form represents a property, then verifying it in any concept should increase its accessibility and speed its verification later in any other concept. Verifying mane for PONY should benefit as much from having verified mane for LION earlier as from verifying mane for HORSE. If properties are represented locally, however, verifying a property should only benefit from verifying a similar form earlier. Verifying mane for PONY should only benefit from verifying mane for HORSE, not from verifying mane for LION. Findings from three experiments strongly supported local property representation and ruled out the interpretation that object similarity was responsible (e.g., the greater overall similarity between HORSE and PONY than between LION and PONY). The findings further suggest that property representation and verification are complicated phenomena, grounded in sensory-motor simulations.

  2. Stochastic relaxation of the contact line of a water drop on a solid substrate subjected to white noise vibration: roles of hysteresis.

    Mettu, Srinivas; Chaudhury, Manoj K


    Relaxation of the three phase contact line of a sessile drop of water on a low energy surface is studied by subjecting it to a white noise vibration. While a spring force acts on the contact line whenever the contact angle deviates from its equilibrium value, it is opposed by hysteresis. The drop, therefore, remains pinned at a metastable state. With an appropriate amount of vibration, the drop can reach a global equilibrium state irrespective of its initial state, be it advanced or retreated. While the end state is free of hysteresis, the current study sheds light on the dynamics of relaxation that is analyzed in conjunction with a modified Langevin equation. Instead of exhibiting a smooth relaxation as predicted by the Langevin equation with a smooth background potential, stepwise relaxation is observed in most cases. These stepwise relaxations can be explained if the background potential is made slightly corrugated that signifies the existence of metastable states of a drop on a surface. The fluctuation of the displacement of the contact line is highly non-Gaussian. It is shown that an exponential distribution of the displacement fluctuation arises due to the nonlinear hysteresis term in the Langevin equation. The observations of stick-slip motion, the large time of relaxation, and the anomalous displacement fluctuation suggest that hysteresis is present during the relaxation process of the drop even though the final state reached by the drop is free of hysteresis. Finally, we compare the displacement fluctuations of the contact line on two different surfaces: a silicone rubber and a fluorocarbon monolayer. Although the displacement fluctuation is exponential in both cases, the later surface exhibits a greater variance of the distribution than the former plausibly due to differences in hysteresis. This result indicates that the fluctuation of displacement may be used as a tool to study the surface property of a low energy substrate.

  3. Representing and Performing Businesses

    Boll, Karen


    and MacKenzie’s idea of performativity. Based on these two approaches, the article demonstrates that the segmentation model represents and performs the businesses as it makes up certain new ways to be a business and as the businesses can be seen as moving targets. Inspired by MacKenzie the argument......This article investigates a segmentation model used by the Danish Tax and Customs Administration to classify businesses’ motivational postures. The article uses two different conceptualisations of performativity to analyse what the model’s segmentations do: Hacking’s notion of making up people...... is that the segmentation model embodies cleverness in that it simultaneously alters what it represents and then represents this altered reality to confirm the accuracy of its own model of the businesses’ postures. Despite the cleverness of the model, it also has a blind spot. The model assumes a world wherein everything...

  4. [Determination of five avermectins in bovine liver by on-line solid-phase extraction with hydrophobic monolithic column coupled with high performance liquid chromatography-tandem mass spectrometry].

    Li, Xin; Zhang, Yaoqin; Ai, Lianfeng; Wang, Xuesheng; Wang, Manman; Xu, Houjun; Hao, Yulan


    A method based on on-line solid-phase extraction (SPE) with hydrophobic monolithic column coupled with high performance liquid chromatography-tandem mass spectrometry was developed for the simultaneous determination of five avermectins in bovine liver. A poly(butyl methacrylate-co-ethylene dimethacrylate) monolithic column was used as the sorbent. The parameters influenced on on-line SPE and separation process such as the loading mobile phase, the eluting flow rate and the solvent for the separation were investigated in detail. Blank samples, spiked samples, matrix effect and recovery experiments were investigated to evaluate the extraction efficiency and potential interfering compounds originating from the matrix. Under the optimized conditions, the method showed a linear range of 1-100 µg/L and the quantification limit of 5 µg/kg for each analyte. The presented method gave recoveries of 77.4%-98.4%. The relative standard deviations of intra-day and inter-day were 4.46%-8.03% and 4.79%-8.68%, respectively. Moreover, no significant changes were found in the extraction performance after more than 400 usages on one monolithic column, and even on the monoliths with various batches. The feasibility of the developed poly (butyl methacrylate-coethylene dimethacrylate) monolithic column based on the on-line SPE method for the determination of avermectins was further demonstrated by the analysis of real samples.

  5. Rotational States of Methyl Radical Monitored by EPR Line Shape of Matrix-Isolated CH3 in CO2 and N2O Solids

    Dmitriev, Yu. A.; Melnikov, V. D.; Zelenetckii, I. A.; Benetis, N. P.


    Methyl radicals, CH3, were trapped in matrices of solid CO2 and N2O by condensing the methyl along with the matrix constituents from the gas phase. The obtained EPR spectra were analyzed using EasySpin and/ or SimFonia simulation software and ab-initio computed quantum-chemistry parameters. We focus on two distinguished features of the spectra: the temperature-dependent linewidth anisotropy and the origin of the weak satellite doublets. The low-temperature spectral analysis of the satellites was based on the coupled representation of the three proton spins of CH3 and a recently obtained parameterization of the spin Hamiltonian based on one nuclear quartet and two doublets within the D3 group. These features were closely correlated to the state of rotation of the trapped radical.

  6. Solid-state pulsed power technology based on PCSS and planar lines%基于光导开关和平板线的固态脉冲功率技术

    谌怡; 夏连胜; 王卫; 刘毅; 张篁; 石金水; 章林文


    For the developmental tendency of pulsed power technology is compact and solid-state, a solid-state pulsed power technology based on GaAs Photoconductive Semiconductor Switches(PCSS) and ceramic planar transmission lines is proposed. The critical components and technologies included are solid-state ceramic planar transmission lines, high-power GaAs PCSS and triggering system of laser diode. An experiment of single Blumlein pulse forming line is conducted, of which the output characteristics is studied, and filament current damage of GaAs PCSS working at the lock-on mode is analyzed. Experimental results show that the proposed compact pulsed power system which obtained a high voltage pulse output above 20 kV on the load is feasible.%紧凑型固态化是脉冲功率技术发展的趋势,研究了基于 GaAs光导开关和陶瓷平板传输线的固态脉冲功率技术。紧凑型固态脉冲功率系统的关键部件主要包括固态陶瓷平板传输线,高功率 GaAs光导开关以及激光二极管触发系统。研究了单路 Blumlein脉冲形成线输出特性,分析了 GaAs光导开关非线性导通带来的损伤,并开展了单路 Blumlein脉冲形成线实验。结果表明:研制基于固态平板传输线、光导开关以及激光二极管触发系统的紧凑型脉冲功率具有可行性,负载上获得了超过20 kV的高压脉冲输出。

  7. Transmission Lines or Poles, Electric, ElectricalLines-This dataset represents electrical generation and distribution facilities for portions of Davis, Salt Lake, Utah, Wasatch, and Weber Counties. These data were digitized as part of State of Utah Comprehensive Emergency Earthquake Preparedne, Published in 1990, 1:24000 (1in=2000ft) scale, State of Utah Automated Geographic Reference Center.

    NSGIC GIS Inventory (aka Ramona) — This Transmission Lines or Poles, Electric dataset, published at 1:24000 (1in=2000ft) scale, was produced all or in part from Hardcopy Maps information as of 1990....

  8. Automatic On-line Solid-phase Extraction-Electrothermal Atomic Absorption Spectrometry Exploiting Sequential Injection Analysis for Trace Vanadium, Cadmium and Lead Determination in Human Urine Samples.

    Giakisikli, Georgia; Ayala Quezada, Alejandro; Tanaka, Junpei; Anthemidis, Aristidis N; Murakami, Hiroya; Teshima, Norio; Sakai, Tadao


    A fully automated sequential injection column preconcentration method for the on-line determination of trace vanadium, cadmium and lead in urine samples was successfully developed, utilizing electrothermal atomic absorption spectrometry (ETAAS). Polyamino-polycarboxylic acid chelating resin (Nobias chelate PA-1) packed into a handmade minicolumn was used as a sorbent material. Effective on-line retention of chelate complexes of analytes was achieved at pH 6.0, while the highest elution effectiveness was observed with 1.0 mol L(-1) HNO3 in the reverse phase. Several analytical parameters, like the sample acidity, concentration and volume of the eluent as well as the loading/elution flow rates, have been studied, regarding the efficiency of the method, providing appropriate conditions for the analysis of real samples. For a 4.5 mL sample volume, the sampling frequency was 27 h(-1). The detection limits were found to be 3.0, 0.06 and 2.0 ng L(-1) for V(V), Cd(II) and Pb(II), respectively, with the relative standard deviations ranging between 1.9 - 3.7%. The accuracy of the proposed method was evaluated by analyzing a certified reference material (Seronorm(TM) trace elements urine) and spiked urine samples.

  9. On-line solid-phase extraction coupled to ultra-performance liquid chromatography with tandem mass spectrometry detection for the determination of benzotriazole UV stabilizers in coastal marine and wastewater samples

    Montesdeoca-Esponda, Sarah; Sosa-Ferrera, Zoraida; Santana-Rodriguez, Jose Juan [Universidad de Las Palmas de Gran Canaria, Departamento de Quimica, Las Palmas de Gran Canaria (Spain)


    Benzotriazoles are a group of UV absorbing compounds considered emerging contaminants that are used in different personal care products, and therefore, it is of high interest to develop sensitive and fast methods for investigating their presence in the environment. In this work, we present the development and application of a novel method based on on-line solid-phase extraction coupled to ultra-performance liquid chromatography with tandem mass spectrometry detection (SPE-UPLC-MS/MS) for the determination of seven benzotriazole UV stabilizers (BUVSs) in coastal marine and wastewater samples. This process is compared with a conventional off-line SPE procedure followed by UPLC-MS/MS. The parameters affecting the performance of the sample preparation and determination processes were evaluated. The results indicate that the on-line procedure provides for better sensitivity and reproducibility and is faster and easier than the off-line procedure. The detection limits and quantification limits achieved were in the range of 0.6-4.1 ng circle L{sup -1} and 2.1-14 ng circle L{sup -1} and relative standard deviation between 6.2 and 10 %. The developed method was applied to coastal marine and wastewater samples from Gran Canaria Island (Spain). All of the BUVSs studied were detected in the samples from wastewater treatment plants and two were found in the seawater samples (UV P in the range of 2.8-4.4 ng circle L{sup -1} and UV 360 between 3.6 and 5.2 ng circle L{sup -1}). (orig.)

  10. On-line electrochemically controlled in-tube solid phase microextraction of inorganic selenium followed by hydride generation atomic absorption spectrometry

    Asiabi, Hamid [Department of Chemistry, Tarbiat Modares University, P.O. Box 14115-175, Tehran (Iran, Islamic Republic of); Yamini, Yadollah, E-mail: [Department of Chemistry, Tarbiat Modares University, P.O. Box 14115-175, Tehran (Iran, Islamic Republic of); Seidi, Shahram [Department of Analytical Chemistry, Faculty of Chemistry, K.N. Toosi University of Technology, Tehran (Iran, Islamic Republic of); Shamsayei, Maryam; Safari, Meysam; Rezaei, Fatemeh [Department of Chemistry, Tarbiat Modares University, P.O. Box 14115-175, Tehran (Iran, Islamic Republic of)


    In this work, for the first time, a rapid, simple and sensitive microextraction procedure is demonstrated for the matrix separation, preconcentration and determination of inorganic selenium species in water samples using an electrochemically controlled in-tube solid phase microextraction (EC-in-tube SPME) followed by hydride generation atomic absorption spectrometry (HG-AAS). In this approach, in which EC-in-tube SPME and HG-AAS system were combined, the total analysis time, was decreased and the accuracy, repeatability and sensitivity were increased. In addition, to increases extraction efficiency, a novel nanostructured composite coating consisting of polypyrrole (PPy) doped with ethyleneglycol dimethacrylate (EGDMA) was prepared on the inner surface of a stainless-steel tube by a facile electrodeposition method. To evaluate the offered setup and the new PPy-EGDMA coating, it was used to extract inorganic selenium species in water samples. Extraction of inorganic selenium species was carried out by applying a positive potential through the inner surface of coated in-tube under flow conditions. Under the optimized conditions, selenium was detected in amounts as small as 4.0 parts per trillion. The method showed good linearity in the range of 0.012–200 ng mL{sup −1}, with coefficients of determination better than 0.9996. The intra- and inter-assay precisions (RSD%, n = 5) were in the range of 2.0–2.5% and 2.7–3.2%, respectively. The validated method was successfully applied for the analysis of inorganic selenium species in some water samples and satisfactory results were obtained. - Graphical abstract: An electrochemically controlled in-tube solid phase microextraction followed by hydride generation atomic absorption spectrometry was developed for extraction and determination ultra-trace amounts of Se in aqueous solutions. - Highlights: • A nanostructured composite coating consisting of PPy doped with EGDMA was prepared. • The coating was

  11. In vitro antitumor efficacy of berberine: solid lipid nanoparticles against human HepG2, Huh7 and EC9706 cancer cell lines

    Meng, Xiang-Ping; Wang, Xiao; Wang, Huai-ling; Chen, Tong-sheng; Wang, Yi-fei; Wang, Zhi-ping


    Hepatocarcinoma and esophageal squamous cell carcinomas threaten human life badly. It is a current issue to seek the effective natural remedy from plant to treat cancer due to the resistance of the advanced hepatocarcinoma and esophageal carcinoma to chemotherapy. Berberine (Ber), an isoquinoline derivative alkaloid, has a wide range of pharmacological properties and is considered to have anti-hepatocarcinoma and antiesophageal carcinoma effects. However its low oral bioavailability restricts its wide application. In this report, Ber loaded solid lipid nanoparticles (Ber-SLN) was prepared by hot melting and then high pressure homogenization technique. The in vitro anti-hepatocarcinoma and antiesophageal carcinoma effects of Ber-SLN relative to efficacy of bulk Ber were evaluated. The particle size and zeta potential of Ber-SLN were 154.3 ± 4.1 nm and -11.7 ± 1.8 mV, respectively. MTT assay showed that Ber-SLN effectively inhibited the proliferation of human HepG2 and Huh7 and EC9706 cells, and the corresponding IC50 value was 10.6 μg/ml, 5.1 μg/ml, and 7.3 μg/ml (18.3μg/ml, 6.5μg/ml, and 12.4μg/ml μg/ml of bulk Ber solution), respectively. These results suggest that the delivery of Ber-SLN is a promising approach for treating tumors.

  12. Evaluation of the effect of TM208 on the activity of five cytochrome P450 enzymes using on-line solid-phase extraction HPLC-DAD: a cocktail approach.

    Lin, Wensi; Zhang, Jianmei; Ling, Xiaomei; Yu, Ning; Li, Jing; Yang, Haisong; Li, Runtao; Cui, Jingrong


    A rapid, simple, and sensitive on-line solid-phase extraction HPLC-DAD method for simultaneous evaluation of the activity of five CYP450 isoforms (CYP1A2, CYP2C19, CYP2D6, CYP2E1 and CYP3A4) in vivo has been developed and validated. The five specific probe substrates include caffeine (1A2), metoprolol (2D6), dapsone (3A4), omeprazole (2C19) and chlorzoxazone (2E1). Automated pre-purification of plasma and enrichment of analytes were performed using a C18 on-line solid-phase extraction cartridge. After being eluted from the cartridge, the analytes and the internal standard antipyrine were separated on a C18 RP analytical column and analyzed by DAD. The method was validated to quantify the concentration ranges of 0.05-50.0 μg/ml for dapsone and omeprazole, 0.1-50.0 μg/ml for caffeine and 0.2-50.0 μg/ml for metoprolol and chlorzoxazone. The linearity (R(2)) for all analytes tested was exceeded 0.99. The intra-day precision ranged from 0.29 to 13% and the inter-day precision ranged from 5.0 to 15%, respectively. The intra-day and inter-day accuracy were between 86.7% and 113.6%. The extraction recoveries were in the range 82.8-109.9% for all the analytes and internal standard antipyrine. This method was successfully applied to evaluate the effects of TM208 on rat five CYP450 isoforms.

  13. On-line Ultrasound-Assisted Dispersive Micro-Solid-Phase Extraction Based on Amino Bimodal Mesoporous Silica Nanoparticles for the Preconcentration and Determination of Cadmium in Human Biological Samples.

    Shirkhanloo, H; Falahnejad, M; Zavvar Mousavi, H


    On-line ultrasound-assisted dispersive micro-solid-phase extraction (USA-DμSPE) has been developed for preconcentration and separation of trace amounts of Cd(II) ions in 0.5 mL of human biological samples. In a syringe with a nylon membrane, new synthetic bulky amino bimodal mesoporous silica nanoparticles (NH2-UVM7) were dispersed as a nanoadsorbent in 5 mL of diluted serum sample (1:10), and after ultrasonic shaking, the liquid phase was separated from the solid phase. At the optimized pH, the chemical and physical adsorption of cadmium ions occurred, respectively, based on complexation with amine groups of UVM7 (Cd:NH2-UVM7) and silica nanoparticles. The analyte was then back-extracted from the sorbent with nitric acid solution (0.2 M), and its concentration was determined by electrothermal atomic absorption spectrometry (ETAAS). Under the optimized conditions, the linear range, limit of detection (LOD), and preconcentration factor (PF) were obtained as 0.01-0.56 μg L(-1), 0.002 μg L(-1), and 25, respectively. The adsorption capacity of NH2-UVM7 was found to be 108.6 mg g(-1) of cadmium. The validation of the methodology was performed by the human standard reference material (HSRM).

  14. Development of a simple extraction cell with bi-directional continuous flow coupled on-line to ICP-MS for assessment of elemental associations in solid samples

    Buanuam, Janya; Tiptanasup, Kasipa; Shiowatana, Juwadee


    A continuous-flow system comprising a novel, custom-built extraction module and hyphenated with inductively coupled plasma-mass spectrometric (ICP-MS) detection is proposed for assessing metal mobilities and geochemical associations in soil compartments as based on using the three step BCR (now...... to discretely introduce appropriate extract volumes to the detector at a given time and with a given dilution factor. The proposed hyphenated method demonstrates excellent performance for on-line monitoring of major and trace elements (Ca, Mn, Fe, Ni, Pb, Zn and Cd) released when applying the various extracting...... the extraction time. Thus, the intimate elemental association between Cd and Zn in contaminated soils could be assessed....

  15. Quantification of Lycopene, β-Carotene, and Total Soluble Solids in Intact Red-Flesh Watermelon (Citrullus lanatus) Using On-Line Near-Infrared Spectroscopy.

    Tamburini, Elena; Costa, Stefania; Rugiero, Irene; Pedrini, Paola; Marchetti, Maria Gabriella


    A great interest has recently been focused on lycopene and β-carotene, because of their antioxidant action in the organism. Red-flesh watermelon is one of the main sources of lycopene as the most abundant carotenoid. The use of near-infrared spectroscopy (NIRS) in post-harvesting has permitted us to rapidly quantify lycopene, β-carotene, and total soluble solids (TSS) on single intact fruits. Watermelons, harvested in 2013-2015, were submitted to near-infrared (NIR) radiation while being transported along a conveyor belt system, stationary and in movement, and at different positions on the belt. Eight hundred spectra from 100 samples were collected as calibration set in the 900-1700 nm interval. Calibration models were performed using partial least squares (PLS) regression on pre-treated spectra (derivatives and SNV) in the ranges 2.65-151.75 mg/kg (lycopene), 0.19-9.39 mg/kg (β-carotene), and 5.3%-13.7% (TSS). External validation was carried out with 35 new samples and on 35 spectra. The PLS models for intact watermelon could predict lycopene with R² = 0.877 and SECV = 15.68 mg/kg, β-carotene with R² = 0.822 and SECV = 0.81 mg/kg, and TSS with R² = 0.836 and SECV = 0.8%. External validation has confirmed predictive ability with R² = 0.805 and RMSEP = 16.19 mg/kg for lycopene, R2 = 0.737 and RMSEP = 0.96 mg/kg for β-carotene, and R² = 0.707 and RMSEP = 1.4% for TSS. The results allow for the market valorization of fruits.

  16. On possible resolutions of the micro-edge problem for a contact line moving on a solid in a pure-vapor atmosphere with no slip and without extended precursor films

    Rednikov, Alexey; Colinet, Pierre


    At the previous APS/DFD meeting, we reported on the possibility of a singularity-free description of a moving contact line totally in the framework of classical physics (no disjoining pressure, no slip) thanks to the phase change whose intensity is regulated by Kelvin effect. Pushing this idea further, there remains a related more practical issue: the Kelvin effect, even though classical, becomes apparent at such small scales that the disjoining pressure (DP) may nonetheless play a significant role. Here we show, for a class of DP isotherms remaining finite at zero film thicknesses, that the same kind of natural singularity-resolution mechanism still holds. As before, we consider, in the framework of the lubrication theory and a classical one-sided model, a contact line moving at a constant velocity (advancing or receding) and starting abruptly at a (formally) bare solid surface, the micro-contact angle being either equal to zero or finite. Also touched upon is a possible resolution of the remaining integrable singularities within the paradigm of de Gennes and coworkers, considered here in another talk by the present authors, by means of regularizing the DP isotherm at very small thicknesses. Supported by ESA & BELSPO, by the EU, and by FRS-FNRS.

  17. Accelerated solvent extraction followed by on-line solid-phase extraction coupled to ion trap LC/MS/MS for analysis of benzalkonium chlorides in sediment samples

    Ferrer, I.; Furlong, E.T.


    Benzalkonium chlorides (BACs) were successfully extracted from sediment samples using a new methodology based on accelerated solvent extraction (ASE) followed by an on-line cleanup step. The BACs were detected by liquid chromatography/ion trap mass spectrometry (LC/MS) or tandem mass spectrometry (MS/MS) using an electrospray interface operated in the positive ion mode. This methodology combines the high efficiency of extraction provided by a pressurized fluid and the high sensitivity offered by the ion trap MS/MS. The effects of solvent type and ASE operational variables, such as temperature and pressure, were evaluated. After optimization, a mixture of acetonitrile/water (6:4 or 7:3) was found to be most efficient for extracting BACs from the sediment samples. Extraction recoveries ranged from 95 to 105% for C12 and C14 homologues, respectively. Total method recoveries from fortified sediment samples, using a cleanup step followed by ASE, were 85% for C12BAC and 79% for C14-BAC. The methodology developed in this work provides detection limits in the subnanogram per gram range. Concentrations of BAC homologues ranged from 22 to 206 ??g/kg in sediment samples from different river sites downstream from wastewater treatment plants. The high affinity of BACs for soil suggests that BACs preferentially concentrate in sediment rather than in water.

  18. Representing distance, consuming distance

    Larsen, Gunvor Riber

    to mobility and its social context. Such an understanding can be approached through representations, as distance is being represented in various ways, most noticeably in maps and through the notions of space and Otherness. The question this talk subsequently asks is whether these representations of distance...... are being consumed in the contemporary society, in the same way as places, media, cultures and status are being consumed (Urry 1995, Featherstone 2007). An exploration of distance and its representations through contemporary consumption theory could expose what role distance plays in forming...... are present in theoretical and empirical elaborations on mobility, but these remain largely implicit and unchallenged (Bauman 1998). This talk will endeavour to unmask distance as a theoretical entity by exploring ways in which distance can be understood and by discussing distance through its representations...

  19. Determination of bezafibrate, methotrexate, cyclophosphamide, orlistat and enalapril in waste and surface waters using on-line solid-phase extraction liquid chromatography coupled to polarity-switching electrospray tandem mass spectrometry.

    Garcia-Ac, Araceli; Segura, Pedro A; Gagnon, Christian; Sauvé, Sébastien


    We developed a rapid method for the monitoring of five selected pharmaceuticals in the influent and effluent of municipal wastewater treatment plants (WWTP) as well as in the effluent-receiving waters. To that end, we optimized and validated an analytical method based on on-line solid-phase extraction (on-line SPE) coupled with reversed-phase liquid chromatography-switching polarity electrospray ionization-tandem mass spectrometry (LC-ESI(+/-)-MS/MS). The target analytes have a variable hydrophobic character and belong to various therapeutic classes including the lipid regulator bezafibrate, the chemotherapy drugs methotrexate and cyclophosphamide, the lipase inhibitor orlistat and the angiotensin converting enzyme (ACE) inhibitor used in the treatment of hypertension, enalapril. The method combines positive and negative voltage switching modes, therefore all analytes can be determined using a single injection and without any reduction in sensitivity. In order to detect traces of these compounds, a preconcentration step before detection is performed by loading 1.00 mL of sample in an on-line SPE cartridge and eluting from the cartridge using a reversed-phase liquid chromatography gradient. Analysis of wastewater and surface water samples was greatly affected by co-eluting matrix compounds, to compensate for matrix effects quantitation was therefore performed using standard additions. Method intra-day precision was less than 6.5% and limits of detection in fortified matrix effluent samples ranged from 9 to 20 ng L(-1). Four of the target pharmaceuticals were detected in the WWTP effluents, enalapril and bezafibrate being the most abundant compounds with concentrations of 35 and 239 ng L(-1), respectively. Concentrations of these same compounds in surface water samples from sites downstream in the St. Lawrence River were 8 and 63 ng L(-1), respectively, which was mainly due to dilution.

  20. Representativity of TMA studies.

    Sauter, Guido


    The smaller the portion of a tumor sample that is analyzed becomes, the higher is the risk of missing important histological or molecular features that might be present only in a subset of tumor cells. Many researchers have, therefore, suggested using larger tissue cores or multiple cores from the same donor tissue to enhance the representativity of TMA studies. However, numerous studies comparing the results of TMA studies with the findings from conventional large sections have shown that all well-established associations between molecular markers and tumor phenotype or patient prognosis can be reproduced with TMAs even if only one single 0.6 mm tissue spot is analyzed. Moreover, the TMA technology has proven to be superior to large section analysis in finding new clinically relevant associations. The high number of samples that are typically included in TMA studies, and the unprecedented degree of standardization during TMA experiments and analysis often give TMA studies an edge over traditional large-section studies.

  1. Comparative evaluation of GenoType MTBDRplus line probe assay with solid culture method in early diagnosis of multidrug resistant tuberculosis (MDR-TB at a tertiary care centre in India.

    Raj N Yadav

    Full Text Available BACKGROUND: The objectives of the study were to compare the performance of line probe assay (GenoType MTBDRplus with solid culture method for an early diagnosis of multidrug resistant tuberculosis (MDR-TB, and to study the mutation patterns associated with rpoB, katG and inhA genes at a tertiary care centre in north India. METHODS: In this cross-sectional study, 269 previously treated sputum-smear acid-fast bacilli (AFB positive MDR-TB suspects were enrolled from January to September 2012 at the All India Institute of Medical Sciences hospital, New Delhi. Line probe assay (LPA was performed directly on the sputum specimens and the results were compared with that of conventional drug susceptibility testing (DST on solid media [Lowenstein Jensen (LJ method]. RESULTS: DST results by LPA and LJ methods were compared in 242 MDR-TB suspects. The LPA detected rifampicin (RIF resistance in 70 of 71 cases, isoniazid (INH resistance in 86 of 93 cases, and MDR-TB in 66 of 68 cases as compared to the conventional method. Overall (rifampicin, isoniazid and MDR-TB concordance of the LPA with the conventional DST was 96%. Sensitivity and specificity were 98% and 99% respectively for detection of RIF resistance; 92% and 99% respectively for detection of INH resistance; 97% and 100% respectively for detection of MDR-TB. Frequencies of katG gene, inhA gene and combined katG and inhA gene mutations conferring all INH resistance were 72/87 (83%, 10/87 (11% and 5/87 (6% respectively. The turnaround time of the LPA test was 48 hours. CONCLUSION: The LPA test provides an early diagnosis of monoresistance to isoniazid and rifampicin and is highly sensitive and specific for an early diagnosis of MDR-TB. Based on these findings, it is concluded that the LPA test can be useful in early diagnosis of drug resistant TB in high TB burden countries.

  2. Understanding Slag Freeze Linings

    Fallah-Mehrjardi, Ata; Hayes, Peter C.; Jak, Evgueni


    Slag freeze linings, the formation of protective deposit layers on the inner walls of furnaces and reactors, are increasingly used in industrial pyrometallurgical processes to ensure that furnace integrity is maintained in these aggressive, high-temperature environments. Most previous studies of freeze-linings have analyzed the formation of slag deposits based solely on heat transfer considerations. These thermal models have assumed that the interface between the stationary frozen layer and the agitated molten bath at steady-state deposit thickness consists of the primary phase, which stays in contact with the bulk liquid at the liquidus temperature. Recent experimental studies, however, have clearly demonstrated that the temperature of the deposit/liquid bath interface can be lower than the liquidus temperature of the bulk liquid. A conceptual framework has been proposed to explain the observations and the factors influencing the microstructure and the temperature of the interface at steady-state conditions. The observations are consistent with a dynamic steady state that is a balance between (I) the rate of nucleation and growth of solids on detached crystals in a subliquidus layer as this fluid material moves toward the stagnant deposit interface and (II) the dissolution of these detached crystals as they are transported away from the interface by turbulent eddies. It is argued that the assumption that the interface temperature is the liquidus of the bulk material represents only a limiting condition, and that the interface temperature can be between T liquidus and T solidus depending on the process conditions and bath chemistry. These findings have implications for the modeling approach and boundary conditions required to accurately describe these systems. They also indicate the opportunity to integrate considerations of heat and mass flows with the selection of melt chemistries in the design of future high temperature industrial reactors.

  3. 固体表面液滴铺展与润湿接触线的移动分析∗%Analyses of droplet spreading and the movement of wetting line on a solid surface

    焦云龙; 刘小君; 逄明华; 刘焜


    Droplet spreading behavior on a substrate is closely bound up with the wettability of the substrate, and plays a critical role in many industrial applications, such as lubrication, painting, coating, and mineral flotation. In this paper, a dynamical model of droplet spreading on a smooth substrate is established through a mechanical analysis. According to the lubrication approximation theory and Navier-Stokes equation, a general nonlinear evolution equation or equations are derived, including the momentum equation, the continuity equation, and the evolution equation of film thickness. We adopt numerical methods to solve these equations, and also quantitatively analyze the relation among film thickness, spreading radius, speed of wetting contact line and time in detail. The results show that the droplet spreading process is mainly divided into two phases, namely expansion phase and contraction phase. Moreover, the spreading process is along with mutual transformation among surface energy, kinetic energy, and different kinds of potential energies. In addition, the final spreading radius Rf of droplet is determined by the inherent wettability of solid surface, and the “collapse effect”, which emerges at t=0.006 s in the spreading process, is related to Laplace pressure difference of curved liquid surface. Finally, by controlling the droplet size, we obtain the scaling law of droplet spreading radius with time, which approximately meets R ∼ t1/7. The scaling law is validated both experimentally and numerically. The results of this study are expected to enhance our knowledge of the movement of wetting contact line and also provide some guidance for the wetting theory.

  4. Simultaneous determination of Pb and Cd in seafood by ICP OES with on-line pre-concentration by solid phase extraction with amberlite XAD-4 after complex formation with DDTP

    Éder José dos Santos


    Full Text Available An on-line method for Cd and Pb pre-concentration and simultaneous determination in acid digested seafood by inductively coupled plasma optical emission spectrometry (ICP OES was developed. The on-line pre-concentration was based on the complex formation of the analytes with the ammonium salt of O,O-diethyldithiophosphate (DDTP and using the Amberlite XAD-4 resin as a solid support in a homemade column. Different conditions of the flow injection system, such as solutions flow rates, nebulizer pressure and eluent concentration were optimized. Three certified reference materials of lobster hepatopancreas, dogfish liver and fish protein, three samples of fish muscle and three samples of shrimp were digested with HNO3, H2O2 and H2SO4 in a microwave system under reflux. DDTP was added in the solutions obtained, and the mixture was injected in the FI system. Calibration curves for Cd and Pb were obtained using the standard solutions in the concentration range 0.05-0.5 µg mL-1 in the digestion medium, submitted to the same pre-concentration procedure. The quantification limits (3.3 x LOD for 5 min of pre-concentration time were 0.005 mg kg-1 Cd2+ and 0.1 mg kg-1 Pb2+ in the sample of fish or shrimp in natura, considering 1.0 g of the sample in a final volume of 50 mL. The agreement of the obtained concentrations with the certified ones (Student t-test, 95% confidence and the recoveries of spiked real samples, from 90 to 120%, demonstrated good accuracy. Precision was also adequate, with relative standard deviations from 2 to 13%. The method was accurate, precise and certainly could be applied to the digested samples of different natures.

  5. Solids Accumulation Scouting Studies

    Duignan, M. R.; Steeper, T. J.; Steimke, J. L.


    The objective of Solids Accumulation activities was to perform scaled testing to understand the behavior of remaining solids in a Double Shell Tank (DST), specifically AW-105, at Hanford during multiple fill, mix, and transfer operations. It is important to know if fissionable materials can concentrate when waste is transferred from staging tanks prior to feeding waste treatment plants. Specifically, there is a concern that large, dense particles containing plutonium could accumulate in poorly mixed regions of a blend tank heel for tanks that employ mixing jet pumps. At the request of the DOE Hanford Tank Operations Contractor, Washington River Protection Solutions, the Engineering Development Laboratory of the Savannah River National Laboratory performed a scouting study in a 1/22-scale model of a waste staging tank to investigate this concern and to develop measurement techniques that could be applied in a more extensive study at a larger scale. Simulated waste tank solids: Gibbsite, Zirconia, Sand, and Stainless Steel, with stainless steel particles representing the heavier particles, e.g., plutonium, and supernatant were charged to the test tank and rotating liquid jets were used to mix most of the solids while the simulant was pumped out. Subsequently, the volume and shape of the mounds of residual solids and the spatial concentration profiles for the surrogate for heavier particles were measured. Several techniques were developed and equipment designed to accomplish the measurements needed and they included: 1. Magnetic particle separator to remove simulant stainless steel solids. A device was designed and built to capture these solids, which represent the heavier solids during a waste transfer from a staging tank. 2. Photographic equipment to determine the volume of the solids mounds. The mounds were photographed as they were exposed at different tank waste levels to develop a composite of topographical areas. 3. Laser rangefinders to determine the volume of

  6. Solid propellants.

    Marsh, H. E., Jr.; Hutchison, J. J.


    The basic principles underlying propulsion by rocket motor are examined together with the configuration of a solid propellant motor. Solid propellants and their preparation are discussed, giving attention to homogeneous propellants, composite propellants, energetic considerations in choosing a solid propellant, the processing of composite propellants, and some examples of new developments. The performance of solid propellants is investigated, taking into account characteristics velocity, the specific impulse, and performance calculations. Aspects of propellant development considered include nonperformance requirements for solid propellants, the approach to development, propellant mechanical properties, and future trends.

  7. Synthesis and application of multi-walled carbon nanotubes-molecularly imprinted sol-gel composite material for on-line solid-phase extraction and high-performance liquid chromatography determination of trace Sudan IV

    Zhang Zhaohui, E-mail: [College of Chemistry and Chemical Engineering, Jishou University, Jishou 416000 (China); State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082 (China); Zhang Huabin; Hu Yufang [College of Chemistry and Chemical Engineering, Jishou University, Jishou 416000 (China); Yao Shouzhuo [State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082 (China)


    A novel composite material of multi-walled carbon nanotubes (MWNTs)-Sudan IV molecularly imprinted polymers (MIPs) was prepared by surface molecular imprinting technique in combination with sol-gel technology. The MWNTs-MIPs were evaluated by scanning electron micrograph (SEM), Fourier transform infrared spectroscopy (FT-IR), and adsorption experiments. The results showed that the MWNTs-MIPs exhibited good selective recognition to Sudan IV. The maximum saturated binding capacity (Q{sub max}) is 63.2 {mu}mol g{sup -1}. Applied as sorbent, the MWNTs-MIPs were used for the determination of trace Sudan IV in chilli powder by on-line solid-phase extraction-high-performance liquid chromatography (SPE-HPLC). The results showed that an enrichment factor of 741 was achieved with a loading flow rate of 1.0 mL min{sup -1} for sampling 50 mL. The MWNTs-MIPs provided a fast and convenience determination platform for Sudan IV in real samples.

  8. Simple and quick determination of analgesics and other contaminants of emerging concern in environmental waters by on-line solid phase extraction coupled to liquid chromatography-tandem mass spectrometry.

    Ferrer-Aguirre, Alejandra; Romero-González, Roberto; Vidal, J L Martínez; Frenich, Antonia Garrido


    A simple and quick analytical method has been developed for the determination of pharmaceutical compounds in water. An on-line solid-phase extraction (SPE) coupled to liquid chromatography-tandem mass spectrometry (LC-MS/MS) method has been optimized to determine 7 contaminants of emerging concern in environmental waters at ngL(-1) levels. This procedure requires minimal sample handling and small sample volume (900μL) with a total running time of 18min. Several SPE parameters were evaluated and optimized in order to achieve a high sample throughput. Therefore sample volume, carryover and reusability of the cartridges were evaluated. Performance characteristics were evaluated and good linearity was obtained (R(2)>0.98). Recoveries were evaluated in spiked samples at three concentrations and the values ranged from 71 to 104%. Intra and inter-day precision was lower than 10 and 13% respectively. Limits of quantification were equal to or lower than 10ngL(-1), except for 1,7-dimethylxanthine (20ngL(-1)) and ibuprofen (50ngL(-1)). The method was applied to 20 environmental water samples, and ibuprofen was the compound most widely detected at concentrations up to 42.06μgL(-1), whereas the other compounds were detected in fewer samples at lower concentrations (up to 15.99μgL(-1)).

  9. Determination of Cd in biological samples by flame AAS following on-line preconcentration by complexation with O,O-diethyldithiophosphate and solid phase extraction with Amberlite XAD-4.

    Santos, Eder José Dos; Herrmann, Amanda Beatriz; Ribeiro, Anderson Schwingel; Curtius, Adilson José


    A method for the on-line preconcentration of Cd based on its complex formation with the ammonium salt of O,O-diethylditiophosphate (DDTP) and using the Amberlite XAD-4 resin as a solid support in a column is proposed. Cadmium was detected by flame atomic absorption spectrometry. Different conditions, such as complexing agent concentration, preconcentration time, solutions flow rates and nature and concentration of the eluent were optimized. Different detection limits (LODs) could be established by using different preconcentration times, between 30s and 5min, with corresponding LODs from 5 to 1mugL(-1), respectively. The method was validated by analyzing five biological certified samples. The relative standard deviation was usually around 3%, indicating a very good precision. The found concentrations values are in agreement with the certified ones, according to the t-test, for a confidence level of 95%. Enriched seawaters were also analyzed, and the recoveries were between 93 and 108%. The FI method is very simple and probably can be coupled to other measuring analytical techniques.

  10. 双标图法对大豆品系和试点的评价及各农艺性状相关性的分析%GGE-biplot Evaluation on Soybean Lines Adaptability and Testing-Site Representativeness and the Correlation Analysis between main Agronomic Traits



    GGE-biplot method was used to analyze the data of 24 soybean lines from eight trial sites in 2009. The results showed that the yield per unit area had positive relation with pod number per plant,grain number per plant,grain weight per plant and 100-grain weight, and negative with number of null node. AN2 had higher yield and better yield stability than other lines. "D" and "F" testing-sites of Heilongjiang province were the best representative testing sites with better discrimination than other sites.%采用GGE双标图法对2009年8个试验地点种植的24份大豆材料进行了分析。结果表明:单位面积产量与单株荚数、单株粒数、单株粒重、百粒重之间存在正相关,与无效节呈负相关;AN2是一个既高产又稳产的品系;D和F试点既具有代表性又具有较强的鉴别力。

  11. GGE-Biplot Analysis on Yield Stability and Testing-site Representativeness of Soybean Lines in Multi-environment Trials%双标图法分析大豆多点试验中品系产量稳定性及试点代表性

    周长军; 田中艳; 李建英; 杨柳; 吴耀坤; 杜志强; 唐金华; 师臣


    In this study, GGE-biplot method was used to analyze the data of soybean multi-environment trials from 2008 to 2009. Nine lines of soybean were tested in five sites. The results showed that Nen 00-2111 had higher yield and better yield stability than other lines. Qingnong 05-1071 and Qingnong 05-1028 possessed special adaptabilities, so it had promotional values in some areas. ‘ Dumeng’ testing-site of Heilongjiang province was the best representative testing site and had better discrimination than other sites.%采用GGE双标图法对2008~2009年黑龙江省5个试验地点的9个大豆品系试验数据进行分析.结果表明:嫩00-2111属于高产、稳产性较好的品系,平均产量2 508.1 kg·km-1;庆农05-1071和庆农05-1028在大庆试点表现较好,其产量分别是3 513.8和3 434.8 kg·km-2,具有特殊适应性,在局部地区有推广价值.在5个试点中,杜蒙试点最好,既具有代表性又具有较强的鉴别力.

  12. Solid lubricants

    Sliney, Harold E.


    The state of knowledge of solid lubricants is reviewed. The results of research on solid lubricants from the 1940's to the present are presented from a historical perspective. Emphasis is placed largely, but not exclusively, on work performed at NASA Lewis Research Center with a natural focus on aerospace applications. However, because of the generic nature of the research, the information presented in this review is applicable to most areas where solid lubricant technology is useful.

  13. Solid Matter

    Angelo, Joseph A


    Supported by a generous quantity of full-color illustrations and interesting sidebars, Solid Matter introduces the basic characteristics and properties of solid matter. It briefly describes the cosmic connection of the elements, leading readers through several key events in human pre-history that resulted in more advanced uses of matter in the solid state. Chapters include:. -Solid Matter: An Initial Perspective. -Physical Behavior of Matter. -The Gravity of Matter. -Fundamentals of Materials Science. -Rocks and Minerals. -Metals. -Building Materials. -Carbon Earth's Most Versatile Element. -S

  14. Sistema limpo em linha para extração em fase sólida de contaminantes emergentes em águas naturais An in-line clean system for the solid-phase extraction of emerging contaminants in natural waters

    Fernando F. Sodré


    Full Text Available A solid-phase in-line extraction system for water samples containing low levels of emerging contaminants is described. The system was specially developed for large volume samples (up to 4 L using commercial solid-phase extraction (SPE cartridges. Four sets containing PTFE-made connectors, brass adapters and ball valves were used to fit SPE cartridges and sample bottles to a 4-port manifold attached to a 20 L carboy. A lab-made vacuum device was connected to the manifold cap. The apparatus is robust and less expensive than the typical available system. Its also provides less experimental handling, avoiding cross contamination and sample losses.

  15. On-line solid-phase extraction coupled with high-performance liquid chromatography and tandem mass spectrometry (SPE-HPLC-MS-MS) for quantification of bromazepam in human plasma: an automated method for bioequivalence studies.

    Gonçalves, José Carlos Saraiva; Monteiro, Tânia Maria; Neves, Claúdia Silvana de Miranda; Gram, Karla Regina da Silva; Volpato, Nádia Maria; Silva, Vivian A; Caminha, Ricardo; Gonçalves, Maria do Rocio Bencke; Santos, Fábio Monteiro Dos; Silveira, Gabriel Estolano da; Noël, François


    A validated method for on-line solid-phase extraction coupled with high-performance liquid chromatography tandem mass spectrometry (SPE-HPLC-MS-MS) is described for the quantification of bromazepam in human plasma. The method involves a dilution of 300 muL of plasma with 100 muL of carbamazepine (2.5 ng/mL), used as internal standard, vortex-mixing, centrifugation, and injection of 100 muL of the supernate. The analytes were ionized using positive electrospray mass spectrometry then detected by multiple reaction monitoring (MRM). The m/z transitions 316-->182 (bromazepam) and 237-->194 (carbamazepine) were used for quantification. The calibration curve was linear from 1 ng/mL (limit of quantification) to 200 ng/mL. The retention times of bromazepam and carbamazepine were 2.6 and 3.2 minutes, respectively. The intraday and interday precisions were 3.43%-15.45% and 5.2%-17%, respectively. The intraday and interday accuracy was 94.00%-103.94%. This new automated method has been successfully applied in a bioequivalence study of 2 tablet formulations of 6 mg bromazepam: Lexotan(R) from Produtos Roche Químicos e Farmacêuticos SA, Rio de Janeiro, Brazil (reference) and test formulation from Laboratórios Biosintética Ltda, São Paulo, Brazil. Because the 90% CI of geometric mean ratios between reference and test were completely included in the 80%-125% interval, the 2 formulations were considered bioequivalent. The comparison of different experimental conditions for establishing a dissolution profile in vitro along with our bioavailability data further allowed us to propose rationally based experimental conditions for a dissolution test of bromazepam tablets, actually lacking a pharmacopeial monograph.

  16. Preliminary results on the determination of ultratrace amounts of cadmium in tea samples using a flow injection on-line solid phase extraction separation and preconcentration technique to couple with a sequential injection hydride generation atomic fluorescence spectrometry.

    Duan, Taicheng; Song, Xuejie; Jin, Dan; Li, Hongfei; Xu, Jingwei; Chen, Hangting


    In this work, a method was developed for determination of ultra-trace levels of Cd in tea samples by atomic fluorescence spectrometry (AFS). A flow injection solid phase extraction (FI-SPE) separation and preconcentration technique, to on-line couple with a sequential injection hydride generation (SI-HG) technique is employed in this study. Cd was preconcentrated on the SPE column, which was made from a neutral extractant named Cyanex 923, while other matrix ions or interfering ions were completely or mostly separated off. Conditions for the SPE separation and preconcentration, as well as conditions for the HG technique, were studied. Due to the separation of interfering elements, Cd hydride generation efficiency could be greatly enhanced with the sole presence of Co(2+) with a concentration of 200mugL(-1), which is much lower than those in other works previously reported. Interferences on both the Cd separation and preconcentration, and Cd hydride generation (HG) were investigated; it showed that both the separation and preconcentration system, and the HG system had a strong anti-interference ability. The SPE column could be repeatedly used at least 400 times, a R.S.D. of 0.97% was obtained for 6 measurements of Cd with 0.2mugL(-1) and a correlation coefficiency of 1.0000 was obtained for the measurement of a series of solutions with Cd concentrations from 0.1 to 2mugL(-1). The method has a low detection limit of 10.8ngL(-1) for a 25mL solution and was successfully validated by using two tea standard reference materials (GBW08513 and GBW07605).

  17. Resolution of an intense sweetener mixture by use of a flow injection sensor with on-line solid-phase extraction. Application to saccharin and aspartame in sweets and drinks.

    Capitán-Vallvey, L F; Valencia, M C; Arana Nicolás, E; García-Jiménez, J F


    An integrated solid-phase spectrophotometry-FIA method is proposed for simultaneous determination of the mixture of saccharin (1,2-benzisothiazol-3(2H)-one-1,1-dioxide; E-954) (SA) and aspartame (N-L-alpha-aspartyl-L-phenylalanine-1-methyl ester; E-951) (AS). The procedure is based on on-line preconcentration of AS on a C18 silica gel minicolumn and separation from SA, followed by measurement, at lambda = 210 nm, of the absorbance of SA which is transiently retained on the adsorbent Sephadex G-25 placed in the flow-through cell of a monochannel FIA setup using pH 3.0 orthophosphoric acid-dihydrogen phosphate buffer, 3.75x10(-3) mol L(-1), as carrier. Subsequent desorption of AS with methanol enables its determination at lambda = 205 nm. With a sampling frequency of 10 h(-1), the applicable concentration range, the detection limit, and the relative standard deviation were from 1.0 to 200.0 microg mL(-1), 0.30 microg mL(-1), and 1.0% (80 microg mL(-1), n = 10), respectively, for SA and from 10.0 to 200.0 microg mL(-1), 1.4 microg mL(-1), and 1.6% (100 microg mL(-1), n = 10) for AS. The method was used to determine the amounts of aspartame and saccharin in sweets and drinks. Recovery was always between 99 and 101%. The method enabled satisfactory determination of blends of SA and AS in low-calorie and dietary products and the results were compared with those from an HPLC reference method.

  18. Handling of bulk solids theory and practice

    Shamlou, P A


    Handling of Bulk Solids provides a comprehensive discussion of the field of solids flow and handling in the process industries. Presentation of the subject follows classical lines of separate discussions for each topic, so each chapter is self-contained and can be read on its own. Topics discussed include bulk solids flow and handling properties; pressure profiles in bulk solids storage vessels; the design of storage silos for reliable discharge of bulk materials; gravity flow of particulate materials from storage vessels; pneumatic transportation of bulk solids; and the hazards of solid-mater

  19. Constructing the Virtual Production Line

    孙连胜; 宁汝新


    In order to study the constructing technology of virtual production line, the structure model of virtual production line was presented, and the object-oriented technique was used to establish its basic classes and relevant models, including solid model, behavior model and object-oriented Petri net based control model, and based on this, the constructing of virtual production line was realized. The application proved that the virtual production line had many good characteristics, such as visualization, interaction, multi-layer and reusability, and it's an efficient tool of analyzing and modeling for layout planning and rapidly reconfiguring of production line.

  20. SPS solid state antenna power combiner

    Fitzsimmons, G. W.


    A concept for a solar power satellite antenna power combiner which utilizes solid state dc-rf converters is described. To avoid the power combining losses associated with circuit hybrids it is proposed that the power from multiple solid state amplifiers be combined by direct coupling of each amplifier's output to the radiating antenna structure. The selected power-combining antenna consists of a printed (metalized) microstrip circuit on a ceramic type dielectric substrate which is backed by a shallow lightweight aluminum cavity which sums the power of four microwave sources. The antenna behaves like two one-half wavelength slot-line antennas coupled together via their common cavity structure. A significant feature of the antenna configuration selected is that the radiated energy is summed to yield a single radiated output phase which represents the average insertion phase of the four power amplifiers. This energy may be sampled and, by comparison with the input signal, one can phase error correct to maintain the insertion phase of all solid state power combining modules at exactly the same value. This insures that the insertion phase of each SPS power combining antenna module is identical. An experiment verification program is described.

  1. Solid consistency

    Bordin, Lorenzo; Creminelli, Paolo; Mirbabayi, Mehrdad; Noreña, Jorge


    We argue that isotropic scalar fluctuations in solid inflation are adiabatic in the super-horizon limit. During the solid phase this adiabatic mode has peculiar features: constant energy-density slices and comoving slices do not coincide, and their curvatures, parameterized respectively by ζ and Script R, both evolve in time. The existence of this adiabatic mode implies that Maldacena's squeezed limit consistency relation holds after angular average over the long mode. The correlation functions of a long-wavelength spherical scalar mode with several short scalar or tensor modes is fixed by the scaling behavior of the correlators of short modes, independently of the solid inflation action or dynamics of reheating.

  2. On-line solid phase extraction-high performance liquid chromatography–isotope dilution–tandem mass spectrometry approach to quantify N,N-diethyl-m-toluamide and oxidative metabolites in urine

    Kuklenyik, Peter; Baker, Samuel E.; Bishop, Amanda M.; Morales-A, Pilar; Calafat, Antonia M., E-mail:


    Graphical abstract: -- Highlights: •A fast assay to quantify the concentrations of N,N-Diethyl-m-Toluamide and two urinary metabolites was developed •It uses online SPE, reversed phase HPLC and tandem mass spectrometry •The method is precise and accurate with limits of detection ≤1 ng mL{sup −1} -- Abstract: Human exposure to N,N-diethyl-m-toluamide (DEET) occurs because of the widespread use of DEET as an active ingredient in insect repellents. However, information on the extent of such exposure is rather limited. Therefore, we developed a fast on-line solid phase extraction–high performance liquid chromatography–isotope dilution tandem mass spectrometry (HPLC-MS/MS) method to measure in urine the concentrations of DEET and two of its oxidative metabolites: N,N-diethyl-3-(hydroxymethyl)benzamide and 3-(diethylcarbamoyl)benzoic acid (DCBA). To the best of our knowledge, this is the first HPLC-MS/MS method for the simultaneous quantification of DEET and its select metabolites in human urine. After enzymatic hydrolysis of the conjugated species in 0.1 mL of urine, the target analytes were retained and pre-concentrated on a monolithic column, separated from each other and from other urinary biomolecules on a reversed-phase analytical column, and detected by atmospheric pressure chemical ionization in positive ion mode. The limits of detection ranged from 0.1 ng mL{sup −1} to 1.0 ng mL{sup −1}, depending on the analyte. Accuracy ranged between 90.4 and 104.9%, and precision ranged between 5.5 and 13.1% RSD, depending on the analyte and the concentration. We tested the usefulness of this method by analyzing 75 urine samples collected anonymously in the Southeastern United States in June 2012 from adults with no known exposure to DEET. Thirty eight samples (51%) tested positive for at least one of the analytes. We detected DCBA most frequently and at the highest concentrations. Our results suggest that this method can be used for the analysis of a large

  3. On-line solid-phase enrichment coupled to packed reactor flow injection analysis in a green analytical procedure to determine low levels of folic acid using fluorescence detection

    Emara Samy


    Full Text Available Abstract Background Analysis of folic acid (FA is not an easy task because of its presence in lower concentrations, its lower stability under acidic conditions, and its sensitiveness against light and high temperature. The present study is concerned with the development and validation of an automated environmentally friendly pre-column derivatization combined by solid-phase enrichment (SPEn to determine low levels of FA. Results Cerium (IV trihydroxyhydroperoxide (CTH as a packed oxidant reactor has been used for oxidative cleavage of FA into highly fluorescent product, 2-amino-4-hydroxypteridine-6-carboxylic acid. FA was injected into a carrier stream of 0.04 M phosphate buffer, pH 3.4 at a flow-rate of 0.25 mL/min. The sample zone containing the analyte was passed through the CTH reactor thermostated at 40°C, and the fluorescent product was trapped and enriched on a head of small ODS column (10 mm x 4.6 mm i.d., 5 μm particle size. The enriched product was then back-flush eluted by column-switching from the small ODS column to the detector with a greener mobile phase consisting of ethanol and phosphate buffer (0.04M, pH 3.4 in the ratio of 5:95 (v/v. The eluent was monitored fluorimetrically at emission and excitation wavelengths of 463 and 367 nm, respectively. The calibration graph was linear over concentrations of FA in the range of 1.25-50 ng/mL, with a detection limit of 0.49 ng/mL. Conclusion A new simple and sensitive green analytical procedure including on-line pre-column derivatization combined by SPEn has been developed for the routine quality control and dosage form assay of FA at very low concentration level. The method was a powerful analytical technique that had excellent sensitivity, sufficient accuracy and required relatively simple and inexpensive instrumentation.

  4. Municipal Solid Waste Resources



    Municipal solid waste (MSW) is a source of biomass material that can be utilized for bioenergy production with minimal additional inputs. MSW resources include mixed commercial and residential garbage such as yard trimmings, paper and paperboard, plastics, rubber, leather, textiles, and food wastes. Waste resources such as landfill gas, mill residues, and waste grease are already being utilized for cost-effective renewable energy generation. MSW for bioenergy also represents an opportunity to divert greater volumes of residential and commercial waste from landfills.

  5. Fast and simple screening for the simultaneous analysis of seven metabolites derived from five volatile organic compounds in human urine using on-line solid-phase extraction coupled with liquid chromatography-tandem mass spectrometry.

    Chiang, Wen-Chieh; Chen, Chao-Yu; Lee, Ting-Chen; Lee, Hui-Ling; Lin, Yu-Wen


    Recently, the International Agency for Research on cancer classified outdoor air pollution and particulate matter from outdoor air pollution as carcinogenic to humans (IARC Group 1), based on sufficient evidence of carcinogenicity in humans and experimental animals and strong mechanistic evidence. In particular, a wide variety of volatile organic compounds (VOCs) are volatized or released into the atmosphere and can become ubiquitous, as they originate from many different natural and anthropogenic sources, such as paints, pesticides, vehicle exhausts, cooking fumes, and tobacco smoke. Humans may be exposed to VOCs through inhalation, ingestion, or dermal contact, which may increase the risk of leukemia, birth defects, neurocognitive impairment, and cancer. Therefore, the focus of this study was the development of a simple, effective and rapid sample preparation method for the simultaneous determination of seven metabolites (6 mercaptic acids+t,t-muconic acid) derived from five VOCs (acrylamide, 1,3-butadiene, acrylonitrile, benzene, and xylene) in human urine by using automated on-line solid-phase extraction (SPE) coupled with liquid chromatography-electrospray tandem mass spectrometry (LC-MS/MS). An aliquot of each diluted urinary sample was directly injected into an autosampler through a trap column to reduce contamination, and then the retained target compounds were eluted by back-flush mode into an analytical column for separation. Negative electrospray ionization tandem mass spectrometry was utilized for quantification. The coefficients of correlation (r(2)) for the calibration curves were greater than 0.995. Reproducibility was assessed by the precision and accuracy of intra-day and inter-day precision, which showed results for coefficient of variation (CV) that were low 0.9 to 6.6% and 3.7 to 8.5%, respectively, and results for recovery that ranged from 90.8 to 108.9% and 92.1 to 107.7%, respectively. The limits of detection (LOD) and limits of

  6. Moving droplets: The measurement of contact lines

    Poelma, C.; Franken, M.J.Z.; Kim, H.; Westerweel, J.


    Contact lines are the locations where a gas, liquid and a solid meet. From everyday experience we know that such contact lines can be mobile, for example in the case of a water droplet sliding over a glass surface. However, the continuum description of the flow towards or away from a contact line im

  7. Solid tumor cytogenetics: current perspectives.

    Nanjangud, Gouri; Amarillo, Ina; Rao, P Nagesh


    Conventional cytogenetics in conjunction with Fluorescence in Situ Hybridization (FISH) continues to remain an important and integral component in the diagnosis and management of solid tumors. The ability to effectively detect the vast majority of clinically relevant chromosomal aberrations with a rapid-to-acceptable turnaround time makes them the most cost-effective screening/detection tool currently available in modern pathology. In this review, we describe a representative set of solid tumors in which chromosomal analysis and/or FISH plays a significant role in the routine clinical management of solid tumors.

  8. Marc Treib: Representing Landscape Architecture

    Braae, Ellen Marie


    The editor of Representing Landscape Architecture, Marc Treib, argues that there is good reason to evaluate the standard practices of representation that landscape architects have been using for so long. In the rush to the promised land of computer design these practices are now in danger of being...... left by the wayside. The 14 often both fitting and well crafted contributions of this publication offer an approach to how landscape architecture has been and is currently represented; in the design study, in presentation, in criticism, and in the creation of landscape architecture....

  9. Representative process sampling - in practice

    Esbensen, Kim; Friis-Pedersen, Hans Henrik; Julius, Lars Petersen


    Didactic data sets representing a range of real-world processes are used to illustrate "how to do" representative process sampling and process characterisation. The selected process data lead to diverse variogram expressions with different systematics (no range vs. important ranges; trends and....../or periodicity; different nugget effects and process variations ranging from less than one lag to full variogram lag). Variogram data analysis leads to a fundamental decomposition into 0-D sampling vs. 1-D process variances, based on the three principal variogram parameters: range, sill and nugget effect...

  10. On-line coupling of solid-phase extraction with mass spectrometry for the analysis of biological samples. II. Determination of clenbuterol in urine using multiple-stage mass spectrometry in an ion-trap mass spectrometer

    van Hout, MWJ; Hofland, CM; Niederlander, HAG; de Jong, GJ


    Solid-phase extraction (SPE) was coupled to ion-trap mass spectrometry to determine clenbuterol in urine. For SPE a cartridge exchanger was used and, after extraction, the eluate was directly introduced into the mass spectrometer, For two types of cartridges, i.e. C-18 and polydivinylbenzene (PDVB),

  11. Louisiana ESI: ROADS (Road Lines)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the state maintained primary and secondary road network of Louisiana. Vector lines in the data set represent Interstates, U.S. Highways, and...

  12. State Wildlife Management Area Public Facilities - lines

    Minnesota Department of Natural Resources — This line theme contains facilities and features for WMAs that are best represented as lines. WMAs are part of the Minnesota state recreation system created to...

  13. Representative process sampling - in practice

    Esbensen, Kim; Friis-Pedersen, Hans Henrik; Julius, Lars Petersen


    /or periodicity; different nugget effects and process variations ranging from less than one lag to full variogram lag). Variogram data analysis leads to a fundamental decomposition into 0-D sampling vs. 1-D process variances, based on the three principal variogram parameters: range, sill and nugget effect......Didactic data sets representing a range of real-world processes are used to illustrate "how to do" representative process sampling and process characterisation. The selected process data lead to diverse variogram expressions with different systematics (no range vs. important ranges; trends and...... presented cases of variography either solved the initial problems or served to understand the reasons and causes behind the specific process structures revealed in the variograms. Process Analytical Technologies (PAT) are not complete without process TOS....

  14. Judgments of and by Representativeness


    probably agree that John Updike is a more representative American writer than Norman Mailer. rlearly, such a judgment does not have a frequentistic...example, in an early study we presented people with the following description, " John is 27 years old, with an outgoing personality. At college he was an...outstanding athlete but did not show much ability or interest in in- tellectual matters". We found that John was judged to be more likely to be "a gym

  15. Solid phase transformations II

    Čermák, J


    This topical volume includes ten invited papers that cover selected areas of the field of solid phase transformations. The first two contributions represent a burgeoning branch; that of the computer simulation of physical phenomena. The following three articles deal with the thermodynamics of phase transformations as a basic theory for describing the phenomenology of phase changes in matter. The next paper describes the interconnections between structural stability and the electronic structure of phases. Two further articles are devoted to displacive transformations; a field where there are ma

  16. Railroad Lines, This data set represents the railroads in Utah and portions of Arizona, Colorado, Idaho, Nevada and New Mexico that appear on the 1:100,000 scale topographical map series from the U. S. Geological Survey (USGS)., Published in 1985, 1:100000 (1in=8333ft) scale, State of Utah Automated Geographic Reference Center.

    NSGIC GIS Inventory (aka Ramona) — This Railroad Lines dataset, published at 1:100000 (1in=8333ft) scale, was produced all or in part from Hardcopy Maps information as of 1985. It is described as...

  17. Red Sesbania Distribution - lines [ds81

    California Department of Resources — This layer conatains line data for the red sesbania (Sesbania punicea) database. The database represents historic and current observations by various individuals of...

  18. Representing culture in interstellar messages

    Vakoch, Douglas A.


    As scholars involved with the Search for Extraterrestrial Intelligence (SETI) have contemplated how we might portray humankind in any messages sent to civilizations beyond Earth, one of the challenges they face is adequately representing the diversity of human cultures. For example, in a 2003 workshop in Paris sponsored by the SETI Institute, the International Academy of Astronautics (IAA) SETI Permanent Study Group, the International Society for the Arts, Sciences and Technology (ISAST), and the John Templeton Foundation, a varied group of artists, scientists, and scholars from the humanities considered how to encode notions of altruism in interstellar messages art_science/2003>. Though the group represented 10 countries, most were from Europe and North America, leading to the group's recommendation that subsequent discussions on the topic should include more globally representative perspectives. As a result, the IAA Study Group on Interstellar Message Construction and the SETI Institute sponsored a follow-up workshop in Santa Fe, New Mexico, USA in February 2005. The Santa Fe workshop brought together scholars from a range of disciplines including anthropology, archaeology, chemistry, communication science, philosophy, and psychology. Participants included scholars familiar with interstellar message design as well as specialists in cross-cultural research who had participated in the Symposium on Altruism in Cross-cultural Perspective, held just prior to the workshop during the annual conference of the Society for Cross-cultural Research . The workshop included discussion of how cultural understandings of altruism can complement and critique the more biologically based models of altruism proposed for interstellar messages at the 2003 Paris workshop. This paper, written by the chair of both the Paris and Santa Fe workshops, will explore the challenges of communicating concepts of altruism that draw on both biological and cultural models.

  19. Semantic Representatives of the Concept

    Elena N. Tsay


    Full Text Available In the article concept as one of the principle notions of cognitive linguistics is investigated. Considering concept as culture phenomenon, having language realization and ethnocultural peculiarities, the description of the concept “happiness” is presented. Lexical and semantic paradigm of the concept of happiness correlates with a great number of lexical and semantic variants. In the work semantic representatives of the concept of happiness, covering supreme spiritual values are revealed and semantic interpretation of their functioning in the Biblical discourse is given.

  20. High Line

    Kiib, Hans


    At just over 10 meters above street level, the High Line extends three kilometers through three districts of Southwestern Manhattan in New York. It consists of simple steel construction, and previously served as an elevated rail line connection between Penn Station on 34th Street and the many....... The High Line project has been carried out as part of an open conversion strategy. The result is a remarkable urban architectural project, which works as a catalyst for the urban development of Western Manhattan. The greater project includes the restoration and reuse of many old industrial buildings...... in close proximity to the park bridge and new projects being added to fit the context. The outcome is a conglomeration of non-contemporary urban activities along the High Line, where mechanical workshops, small wholesale stores. etc. mix with new exclusive residential buildings, eminent cafés...

  1. High Line

    Kiib, Hans


    in close proximity to the park bridge and new projects being added to fit the context. The outcome is a conglomeration of non-contemporary urban activities along the High Line, where mechanical workshops, small wholesale stores. etc. mix with new exclusive residential buildings, eminent cafés......At just over 10 meters above street level, the High Line extends three kilometers through three districts of Southwestern Manhattan in New York. It consists of simple steel construction, and previously served as an elevated rail line connection between Penn Station on 34th Street and the many...... factories and warehouses on Gansevoort Street. Today the High Line is a beautiful park covered with new tiles, viewing platforms and smaller recreational areas. The park bridge has simple, uniform, urban fittings and features a variety of flowering plants, grasses, shrubs and trees from around the world...

  2. Representative mass reduction in sampling

    Petersen, Lars; Esbensen, Harry Kim; Dahl, Casper Kierulf


    We here present a comprehensive survey of current mass reduction principles and hardware available in the current market. We conduct a rigorous comparison study of the performance of 17 field and/or laboratory instruments or methods which are quantitatively characterized (and ranked) for accuracy...... always be representative in the full Theory of Sampling (TOS) sense. This survey also allows empirical verification of the merits of the famous ??Gy?s formula?? for order-of-magnitude estimation of the Fundamental Sampling Error (FSE).......We here present a comprehensive survey of current mass reduction principles and hardware available in the current market. We conduct a rigorous comparison study of the performance of 17 field and/or laboratory instruments or methods which are quantitatively characterized (and ranked) for accuracy...... dividers, the Boerner Divider, the ??spoon method??, alternate/fractional shoveling and grab sampling. Only devices based on riffle splitting principles (static or rotational) passes the ultimate representativity test (with minor, but significant relative differences). Grab sampling, the overwhelmingly...

  3. Municipal Solid Waste Characterization according to Different Income Levels: A Case Study

    Huseyin Kurtulus Ozcan


    Full Text Available Solid waste generation and characterization are some of the most important parameters which affect environmental sustainability. Municipal solid waste (MSW characterization depends on social structure and income levels. This study aims to determine the variations in waste components within MSW mass by income levels and seasonal conditions following the analysis conducted on the characterization of solid wastes produced in the Kartal district of the province of Istanbul, which is the research area of this study. To this end, 1.9 tons of solid waste samples were collected to represent four different lifestyles (high, medium, and low income levels, and downtown in the winter and summer periods, and characterization was made on these samples. In order to support waste characterization, humidity content and calorific value analyses were also conducted and various suggestions were brought towards waste management in line with the obtained findings. According to the results obtained in the study, organic waste had the highest rate of waste mass by 57.69%. Additionally, significant differences were found in municipal solid waste components (MSWC based on income level. Average moisture content (MC of solid waste samples was 71.1% in moisture analyses. The average of calorific (heating value (HHV was calculated as 2518.5 kcal·kg−1.

  4. Representing Conversations for Scalable Overhearing

    Gutnik, G; 10.1613/jair.1829


    Open distributed multi-agent systems are gaining interest in the academic community and in industry. In such open settings, agents are often coordinated using standardized agent conversation protocols. The representation of such protocols (for analysis, validation, monitoring, etc) is an important aspect of multi-agent applications. Recently, Petri nets have been shown to be an interesting approach to such representation, and radically different approaches using Petri nets have been proposed. However, their relative strengths and weaknesses have not been examined. Moreover, their scalability and suitability for different tasks have not been addressed. This paper addresses both these challenges. First, we analyze existing Petri net representations in terms of their scalability and appropriateness for overhearing, an important task in monitoring open multi-agent systems. Then, building on the insights gained, we introduce a novel representation using Colored Petri nets that explicitly represent legal joint conv...

  5. Investigation of a stripline transmission line structure for gyromagnetic nonlinear transmission line high power microwave sources.

    Reale, D V; Parson, J M; Neuber, A A; Dickens, J C; Mankowski, J J


    A stripline gyromagnetic nonlinear transmission line (NLTL) was constructed out of yttrium iron garnet ferrite and tested at charge voltages of 35 kV-55 kV with bias fields ranging from 10 kA/m to 20 kA/m. Typically, high power gyromagnetic NLTLs are constructed in a coaxial geometry. While this approach has many advantages, including a uniform transverse electromagnetic (TEM) mode, simple interconnection between components, and the ability to use oil or pressurized gas as an insulator, the coaxial implementation suffers from complexity of construction, especially when using a solid insulator. By moving to a simpler transmission line geometry, NLTLs can be constructed more easily and arrayed on a single substrate. This work represents a first step in exploring the suitability of various transmission line structures, such as microstrips and coplanar waveguides. The resulting high power microwave (HPM) source operates in ultra high frequency (UHF) band with an average bandwidth of 40.1% and peak rf power from 2 MW to 12.7 MW.

  6. Automated sequential injection-microcolumn approach with on-line flame atomic absorption spectrometric detection for implementing metal fractionation schemes of homogeneous and non-homogeneous solid samples of environmental interest

    Chomchoei, Roongrat; Miró, Manuel; Hansen, Elo Harald


    An automated sequential injection (SI) system incorporating a dual-conical microcolumn is proposed as a versatile approach for the accommodation of both single and sequential extraction schemes for metal fractionation of solid samples of environmental concern. Coupled to flame atomic absorption...... spectrometric detection and used for the determination of Cu as a model analyte, the potentials of this novel hyphenated approach are demonstrated by the ability of handling up to 300 mg sample of a nonhomogeneous sewage amended soil (viz., CRM 483). The three steps of the endorsed Standards, Measurements...

  7. 26. 13-MHz absorption line toward Cassiopeia A

    Konovalenko, A.A.; Sodin, L.G.


    New observations confirm that the 26.13-MHz absorption line previously detected in the direction toward the radio source Cas A represents a carbon recombination line, not a hyperfine-structure nitrogen line. Some relevant implications are discussed.

  8. Melting line of Yukawa system by computer simulation

    Meijer, E.J.; Frenkel, D.


    We located the melting line of the Yukawa system by determining the free energy of both fluid and solid phases by computer simulations. At the high densities the fluid freezes into a body-centered-cubic (bcc) solid, whereas for low densities it freezes into a face-centered-cubic (fcc) solid. For bot

  9. On-line dynamic extraction and automated determination of readily bioavailable hexavalent chromium in solid substrates using micro-sequential injection bead-injection lab-on-valve hyphenated with electrothermal atomic absorption spectrometry

    Long, Xiangbao; Miró, Manuel; Hansen, Elo Harald


    A novel and miniaturized micro-sequential injection bead injection lab-on-valve (μSI-BI-LOV) fractionation system was developed for in-line microcolumn soil extraction under simulated environmental scenarios and accurate monitoring of the content of easily mobilisable hexavalent chromium in soil...... environments at the sub-low parts-per-million level. The flow system integrates dynamic leaching of hexavalent chromium using deionized water as recommended by the German Standard DIN 38414-S4 method; on-line pH adjustment of the extract by a 0.01 mol L-1 Tris-HNO3 buffer solution; isolation of the chromate......). The effect of simulated acidic rain on the accessibility of chromate forms for plant uptake was also investigated. The proposed approach offers several advantages over conventional speciation/fractionation protocols in the batch mode, including immediate separation with concomitant preconcentration...

  10. Coiled transmission line pulse generators

    McDonald, Kenneth Fox (Columbia, MO)


    Methods and apparatus are provided for fabricating and constructing solid dielectric "Coiled Transmission Line" pulse generators in radial or axial coiled geometries. The pour and cure fabrication process enables a wide variety of geometries and form factors. The volume between the conductors is filled with liquid blends of monomers, polymers, oligomers, and/or cross-linkers and dielectric powders; and then cured to form high field strength and high dielectric constant solid dielectric transmission lines that intrinsically produce ideal rectangular high voltage pulses when charged and switched into matched impedance loads. Voltage levels may be increased by Marx and/or Blumlein principles incorporating spark gap or, preferentially, solid state switches (such as optically triggered thyristors) which produce reliable, high repetition rate operation. Moreover, these Marxed pulse generators can be DC charged and do not require additional pulse forming circuitry, pulse forming lines, transformers, or an a high voltage spark gap output switch. The apparatus accommodates a wide range of voltages, impedances, pulse durations, pulse repetition rates, and duty cycles. The resulting mobile or flight platform friendly cylindrical geometric configuration is much more compact, light-weight, and robust than conventional linear geometries, or pulse generators constructed from conventional components. Installing additional circuitry may accommodate optional pulse shape improvements. The Coiled Transmission Lines can also be connected in parallel to decrease the impedance, or in series to increase the pulse length.

  11. Statics of deformable solids

    Bisplinghoff, Raymond L; Pian, Theodore HH


    Profusely illustrated exposition of fundamentals of solid mechanics and principles of mechanics, statics, and simple statically indeterminate systems. Covers strain and stress in three-dimensional solids, elementary elasticity, energy principles in solid continuum, and more. 1965 edition.

  12. Development and validation of an ultra-high performance LC-MS/MS assay for intracellular SN-38 in human solid tumour cell lines: comparison with a validated HPLC-fluorescence method.

    Ghazaly, Essam; Perry, Jackie; Kitromilidou, Christiana; Powles, Thomas; Joel, Simon


    A simple and rapid ultra-high performance liquid chromatography-mass spectrometry/mass spectrometry (UPLC-MS/MS) method has been developed for measuring intracellular concentrations of the anticancer agent 7-ethyl-10-hydroxycamptothecin (SN-38) in tumour cells using camptothecin (CPT) as internal standard. SN-38 extraction was carried out using acidified acetonitrile. SN-38 and CPT were separated on a PFP column using gradient elution with acidified water and acetonitrile. SN-38 and CPT were quantified using a triple quadrupole mass spectrometry system. Least square regression calibration lines were obtained with average correlation coefficients of R(2)=0.9993±0.0016. The lower limit of detection (LOD) and lower limit of quantification (LOQ) for SN-38 were 0.1 and 0.3ng/ml, respectively. CPT recovery was 98.5±13% and SN-38 recoveries at low quality control (LQC, 5ng/ml) and high quality control (HQC, 500ng/ml) were 89±6% and 95±8%, respectively. The intra- and inter-day imprecision for LQC was 5.8 and 8.5%, and for HQC was 6.3 and 4.4%, respectively. The method was compared to a validated high performance liquid chromatography-fluorescent method. In addition, the method has been successfully applied to determine the intracellular accumulation of SN-38 investigating the transport through ABCB1 (P-gp) and ABCG2 (BCRP) efflux pumps in colorectal cancer cell lines.

  13. Status report on solid control in leachates

    Beahm, E.C.; Weber, C.F.; Lee, D.D.; Dillow, T.A.; Hunt, R.D. [Oak Ridge National Lab., TN (United States); Keswa, C.M.; Osseo-Asare, K.; Spear, K.E. [Pennsylvania State Univ., University Park, PA (United States)


    Sludge pretreatment will involve some combination of washing and leaching with sodium hydroxide solutions to remove soluble salts and amphoteric material such as alumina. It is of paramount importance to prevent gelation and uncontrolled solid formation in tanks, transfer lines, and process equipment. An evaluation of results of washing and caustic leaching indicates that washing is more effective in dissolving sludge solids than subsequent sodium hydroxide treatment. Only aluminum and chromium were removed more effectively by caustic leaching than by water washing.

  14. Sequential injection/bead injection lab-on-valve schemes for on-line solid phase extraction and preconcentration of ultra-trace levels of heavy metals with determination by ETAAS and ICPMS

    Wang, Jianhua; Hansen, Elo Harald; Miró, Manuel


    This communication presents an overview of the state-of-the-art of the exploitation of sequential injection (SI)-bead injection (BI)-lab-on-valve (LOV) schemes for automatic on-line sample pre-treatments interfaced with ETAAS and ICPMS detection as conducted in the authors' group. The discussions......, that is, the hydrophilic SP Sephadex C-25 cation exchange and iminodiacetate based Muromac A-1 chelating resins, and the hydrophobic poly(tetrafluoroethylene) (PTFE) and poly(styrene-divinylbenzene) copolymer alkylated with octadecyl groups (C18-PS/DVB). Using ETAAS as detection device, the easy......-to-handle hydrophilic renewable reactors hold the features of improved R.S.D.s and LODs as compared to those operated in the conventional, permanent mode, in addition to the elimination of flow resistance. The hydrophobic columns fall into two categories, that is, the renewable one packed with C18-PS/DVB beads entails...

  15. Analysis of biogenic carbonates by inductively coupled plasma-mass spectrometry (ICP-MS). Flow injection on-line solid-phase preconcentration for trace element determination in fish otoliths.

    Arslan, Z; Paulson, A J


    The aragonite deposits within the ear bones (otoliths) of teleost fish retain a chemical signal reflecting the life history of fish (similar to rings of trees) and the nature of fish habitats. Otoliths dissolved in acid solutions contain high concentrations of calcium and a variety of proteins. Elimination of matrix salts and organic interferences during preconcentration is essential for accurate determination of trace elements in otolith solutions by inductively coupled plasma-quadrupole mass spectrometry. An iminodiacetate-based chelating resin (Toyopearl AF-Chelate 650 M) has been used for on-line preconcentration and matrix separation for the determination of 31 transition and rare elements. Successful preconcentration of the elements was achieved at pH 5 by on-line buffering, except Mn which required pH 8.8. Sample solutions were loaded on to the column for 1 min at 3.2 mL min(-1), and then eluted directly into the mass spectrometer with 4% v/v nitric acid. This procedure enabled up to 25-fold preconcentration with successful removal of the calcium matrix. The effect of heat-assisted oxidation with concentrated nitric acid was investigated to eliminate the organic matrix. It was found that heating to dryness after dissolution and further mineralization with the acid significantly improved the retention of the transition elements. The method was validated by analysis of a certified reference material produced from saggittal otoliths of emperor snapper ( Lutjanus sebae), and then applied to the determination of trace metal concentrations in juvenile bluefin tuna ( Thunnus thynnus) from the Western Pacific Ocean.

  16. Analysis of biogenic carbonates by inductively coupled plasma-mass spectrometry (ICP-MS). Flow injection on-line solid-phase preconcentration for trace element determination in fish otoliths

    Arslan, Z.; Paulson, A.J. [National Oceanic and Atmospheric Administration (NOAA), Northeast Fisheries Science Center (NFSC), James J. Howard Marine Sciences Laboratory, Highlands, NJ (United States)


    The aragonite deposits within the ear bones (otoliths) of teleost fish retain a chemical signal reflecting the life history of fish (similar to rings of trees) and the nature of fish habitats. Otoliths dissolved in acid solutions contain high concentrations of calcium and a variety of proteins. Elimination of matrix salts and organic interferences during preconcentration is essential for accurate determination of trace elements in otolith solutions by inductively coupled plasma-quadrupole mass spectrometry. An iminodiacetate-based chelating resin (Toyopearl AF-Chelate 650 M) has been used for on-line preconcentration and matrix separation for the determination of 31 transition and rare elements. Successful preconcentration of the elements was achieved at pH 5 by on-line buffering, except Mn which required pH 8.8. Sample solutions were loaded on to the column for 1 min at 3.2 mL min{sup -1}, and then eluted directly into the mass spectrometer with 4% v/v nitric acid. This procedure enabled up to 25-fold preconcentration with successful removal of the calcium matrix. The effect of heat-assisted oxidation with concentrated nitric acid was investigated to eliminate the organic matrix. It was found that heating to dryness after dissolution and further mineralization with the acid significantly improved the retention of the transition elements. The method was validated by analysis of a certified reference material produced from saggittal otoliths of emperor snapper (Lutjanus sebae), and then applied to the determination of trace metal concentrations in juvenile bluefin tuna (Thunnus thynnus) from the Western Pacific Ocean. (orig.)


    Raghu Nandan Reddy* and Arshia Shariff


    Solid lipid nanoparticles are at the forefront of the rapidly developing field of nanotechnology with several potential applications in drug delivery, research and clinical medicine, as well as in other varied sciences. Solid lipid nanoparticle (SLN) dispersions have been proposed as a new type of colloidal drug carrier system suitable for intravenous administration. Solid lipid nanoparticles (SLNs) technology represents a promising new approach to lipophilic drug delivery. Solid lipid nanopa...

  18. Maria Reiche's Line to Archaeoastronomy

    Sparavigna, Amelia Carolina


    Maria Reiche was a German mathematician and archaeologist that, from 1940, devoted her life to the study of the Nazca Lines, the most famous Peruvian geoglyphs, gaining recognition and preservation of them. Created by removing the upper most layer of the arid soil of the Nazca desert, these geoglyphs, declared in 1995 a UNESCO World Heritage Site, are composed by very long straight and trapezoidal lines, spirals and large figures representing animals. Maria Reiche, in fact an archaeoastronome...

  19. production lines

    Jingshan Li


    Full Text Available In this work, serial production lines with finished goods buffers operating in the pull regime are considered. The machines are assumed to obey Bernoulli reliability model. The problem of satisfying customers demand is addressed. The level of demand satisfaction is quantified by the due-time performance (DTP, which is defined as the probability to ship to the customer a required number of parts during a fixed time interval. Within this scenario, the definitions of DTP bottlenecks are introduced and a method for their identification is developed.

  20. 10 CFR 63.332 - Representative volume.


    ... 10 Energy 2 2010-01-01 2010-01-01 false Representative volume. 63.332 Section 63.332 Energy... Protection Standards § 63.332 Representative volume. (a) The representative volume is the volume of ground... radionuclides released from the Yucca Mountain disposal system that will be in the representative volume....

  1. Validation of an off line solid phase extraction liquid chromatography-tandem mass spectrometry method for the determination of systemic insecticide residues in honey and pollen samples collected in apiaries from NW Spain.

    García-Chao, María; Agruña, María Jesús; Flores Calvete, Gonzalo; Sakkas, Vasilis; Llompart, María; Dagnac, Thierry


    The use of pesticides to protect crops against plagues and insects is one of the most important ways to assure agricultural quality and productivity. However, bad application practices may cause the contamination of different environmental compartments and animal species, as a consequence of migration or accumulation of those compounds. Fipronil, imidacloprid and thiametoxam are systemic or systemic-like insecticides widely used in maize crops. Their heavy action in the nervous system of target insects also means a high toxicity to non-target pollinator insects such as honey bees which can get in touch with them through pollen and nectar during foraging activities. These insecticides have even been suspected to cause a significant decrease of honeybee colonies that has been observed in many countries since the past decade. Since September 1st 2008, the European Commission set new MRLs in food and feed of plant and animal origin. The pesticides included in this study have MRLs in honey and pollen between 10 and 50 ng g(-1). In the present work, an analytical method was developed with the aim of determining residues of fipronil and some of its metabolites (fipronil sulfone, fipronil sulfide, fipronil desulfinyl and fipronil carboxamide), thiamethoxam and imidacloprid in honey and pollen samples. The extraction optimization was performed using a Doehlert experimental design by studying two factors, the mixture and the ratio of solvents used. Prior to the extraction procedure, raw hive samples containing honey, pollen and wax were centrifuged at 4000 rpm. The upper solid material was removed, and 1 g of the lower phase was mixed with 3 mL of the optimized mixture of methanol/water (10/90). The extract was passed through a florisil cartridge and the target compounds were eluted with methanol and analysed by LC-MS/MS in selective reaction monitoring (SRM) mode. The method was validated according to the guidelines included in the SANCO/10684/2009 document and the ISO

  2. Solid lubricants and surfaces

    Braithwaite, E R


    Solid Lubricants and Surfaces deals with the theory and use of solid lubricants, particularly in colloidal form. Portions of this book are devoted to graphite and molybdenum disulfides, which are widely used solid lubricants in colloidal form. An extensive literature on the laboratory examination of hundreds of solids as potential lubricants is also provided in this text. Other topics discussed include the metals and solid lubricants; techniques for examining surfaces; other solid lubricants; metal shaping; and industrial uses of solid-lubricant dispersions. This publication is beneficial to e

  3. Parallel Lines

    James G. Worner


    Full Text Available James Worner is an Australian-based writer and scholar currently pursuing a PhD at the University of Technology Sydney. His research seeks to expose masculinities lost in the shadow of Australia’s Anzac hegemony while exploring new opportunities for contemporary historiography. He is the recipient of the Doctoral Scholarship in Historical Consciousness at the university’s Australian Centre of Public History and will be hosted by the University of Bologna during 2017 on a doctoral research writing scholarship.   ‘Parallel Lines’ is one of a collection of stories, The Shapes of Us, exploring liminal spaces of modern life: class, gender, sexuality, race, religion and education. It looks at lives, like lines, that do not meet but which travel in proximity, simultaneously attracted and repelled. James’ short stories have been published in various journals and anthologies.

  4. Feature-based Design of Welded Structure for Robotic Arc Welding Off-line Programming


    Feature modeler of welded structure provides both 3D-geographical and non-geographical features for the off-line programming of arc welded robot. Welded structure is regarded as an assembly, the design of welded structure consists of three aspects: plane, joint, and groove design. Each aspect corresponds to a category of features. The plane features are defined by interactive feature definition. A method analogous to the “mating feature” is introduced to represent the joint features. Based on AutoCAD 2000, a B-rep solid modeler, a prototype system is implemented.

  5. Preparation of an epitope-imprinted polymer with antibody-like selectivity for beta2-microglobulin and application in serum sample analysis with a facile method of on-line solid-phase extraction coupling with high performance liquid chromatography.

    Yang, Fangfang; Deng, Dandan; Dong, Xiangchao; Lin, Shen


    Molecularly imprinted polymers (MIPs) for protein recognition have great application potential in the biological analysis. However, preparation of protein imprinted polymer is still facing challenge. Beta2-microglobulin (β2m) is a protein biomarker that can be used in diagnosis of different diseases. In this research, a novel MIP with ability of β2m recognition has been developed by epitope and surface-confined imprinting approaches. A peptide with sequence of MIQRTPKIQ was selected as template. A strategy of combination of hierarchical imprinting and template immobilization was employed in the β2m-MIP synthesis. Imprinted binding sites with open-entrance have been created that have good accessibility for β2m and facilitated fast reversible binding kinetics. The experimental results demonstrated that the MIP has good selectivity. It can differentiate the template from peptide with different sequence and distinguish the β2m from other proteins with similar size and pI values. After binding property study of the β2m-MIP, a method of β2m determination in serum was established in which β2m was on-line extracted by MIP and analyzed by HPLC process. The recoveries for spiked serum was ≥83% with RSD <1.1%, indicating that the method has good accuracy and precisions. The LOD and LOQ were 0.058 and 0.195mgL(-1) respectively, which meet the requirements of the β2m analysis. The successful application of the β2m-MIP demonstrated that β2m has reversible binding on the MIP with a kinetics that can meet the requirements of the HPLC analysis. It also indicated that the β2m-MIP has good mechanical strength and reusability that can be applied reliably in the practical analysis. As a synthetic antibody, β2m-MIP is advantageous compared to the biological molecules.

  6. The need for the solid modelling of structure in the archaeology of buildings

    Robert Daniels


    Full Text Available Three-dimensional modelling is an attempt to represent the world in three dimensions, simplifying through deliberate assumptions. In archaeology, this has developed as an extension of the traditional use of three-dimensional drawings to help present and record data. The debate in the archaeological literature over whether surface or solid modellers should be used is one based on the premise that the purpose of three-dimensional modelling is data visualisation. This concentration on perception modelling has been at the expense of research on the modelling of structure. Surface and Solid Modellers are introduced and defined. I argue that developments in modelling software mean that there is no longer a clear distinction between the two types of software along application lines. We should think of models in terms of their applications rather than the software which generates them. Although data visualisation (including virtual reality is an important part of three-dimensional modelling, I argue that it should be explicitly divorced from the related field of photo-realism at a research level. Perception modelling can be performed by surface or solid modellers. Modelling structure is better performed with a solid modeller, if we wish to be as explicit as possible in our modelling. A structural model can be used as a spatial database. If we wish to ask questions about the physical properties of a structure, then we must use solid modellers. In addition to the engineering properties of structures, solid modellers can also be used to answer questions about the economics of construction. For historical reasons, the construction industry has preferred to use surface modellers, but I argue for the advantages of solid modelling in the archaeological study of construction.

  7. Representing Uncertainty by Probability and Possibility

    Uncertain parameters in modeling are usually represented by probability distributions reflecting either the objective uncertainty of the parameters or the subjective belief held by the model builder. This approach is particularly suited for representing the statistical nature or variance of uncer......Uncertain parameters in modeling are usually represented by probability distributions reflecting either the objective uncertainty of the parameters or the subjective belief held by the model builder. This approach is particularly suited for representing the statistical nature or variance...

  8. Representing Uncertainty by Probability and Possibility

    Uncertain parameters in modeling are usually represented by probability distributions reflecting either the objective uncertainty of the parameters or the subjective belief held by the model builder. This approach is particularly suited for representing the statistical nature or variance of uncer......Uncertain parameters in modeling are usually represented by probability distributions reflecting either the objective uncertainty of the parameters or the subjective belief held by the model builder. This approach is particularly suited for representing the statistical nature or variance...

  9. Scalar operators in solid-state NMR

    Sun, Boqin


    Selectivity and resolution of solid-state NMR spectra are determined by dispersion of local magnetic fields originating from relaxation effects and orientation-dependent resonant frequencies of spin nuclei. Theoretically, the orientation-dependent resonant frequencies can be represented by a set of irreducible tensors. Among these tensors, only zero rank tensors (scalar operators) are capable of providing high resolution NMR spectra. This thesis presents a series of new developments in high resolution solid-state NMR concerning the reconstruction of various scalar operators motion in solid C{sub 60} is analyzed.

  10. Cadmium complexation by solid waste leachates

    Xu Ze Lun; Christensen, Thomas H.


    A previously reported method for determination of Cd species in solid waste leachates has been applied to ten leachate samples representing five different types of solid waste: refuse compost, flyash from coal combustion, sewage sludge, refuse incineration residues and landfilled municipal waste......, slowly labile complexes and stable complexes. Leachates originating from the same type of solid waste showed different fractions of Cd, in particular with respect to free divalent Cd and stable Cd complexes. Only coal flyash showed almost identical fractions of Cd in the two leachates. The latter is due...

  11. 7 CFR 1280.611 - Representative period.


    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Representative period. 1280.611 Section 1280.611... INFORMATION ORDER Procedures To Request a Referendum Definitions § 1280.611 Representative period. Representative period means the period designated by the Secretary pursuant to § 518 of the Act. ...

  12. 29 CFR 548.405 - Representative period.


    ... 29 Labor 3 2010-07-01 2010-07-01 false Representative period. 548.405 Section 548.405 Labor... Application § 548.405 Representative period. (a) The application must set forth the facts relied upon to show... employee exclusive of overtime premiums over a representative period of time. 21 The basic rate will be...

  13. 7 CFR 1230.618 - Representative period.


    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Representative period. 1230.618 Section 1230.618... CONSUMER INFORMATION Procedures for the Conduct of Referendum Definitions § 1230.618 Representative period. The term Representative period means the 12-consecutive months prior to the first day of absentee and...

  14. 7 CFR 1220.612 - Representative period.


    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Representative period. 1220.612 Section 1220.612... CONSUMER INFORMATION Procedures To Request a Referendum Definitions § 1220.612 Representative period. Representative period means the period designated by the Secretary pursuant to section 1970 of the Act. ...

  15. Elections for staff representatives – Join, commit and vote!

    Staff Association


    The Staff Council is a statutory body representing collectively in the area of employment conditions all CERN staff members (MPE and MPA), as well as the pensioners, former Cernois. The Staff Council is the supreme representative body of the CERN staff and pensioners, which defines the main lines of the policy of the Staff Association. The Staff Council is composed of staff representatives (45 seats to represent staff members, and 5 for representing fellows and associate members), as well as delegates for pensioners (seven positions), designated by GAC-EPA. Every two years, the Council is renewed through elections. Concerning the 45 delegates representing staff members, all departments have a least two seats allocated, one in career paths AA to D and one in career paths E to H. This guarantees a fair distribution of seats among the various organizational units and career paths. The table below, shows the exact number of delegates per department and career paths. Staff members or fellows who want to participa...

  16. Mining Representative Subset Based on Fuzzy Clustering

    ZHOU Hongfang; FENG Boqin; L(U) Lintao


    Two new concepts-fuzzy mutuality and average fuzzy entropy are presented. Then based on these concepts, a new algorithm-RSMA (representative subset mining algorithm) is proposed, which can abstract representative subset from massive data.To accelerate the speed of producing representative subset, an improved algorithm-ARSMA(accelerated representative subset mining algorithm) is advanced, which adopt combining putting forward with backward strategies. In this way, the performance of the algorithm is improved. Finally we make experiments on real datasets and evaluate the representative subset. The experiment shows that ARSMA algorithm is more excellent than RandomPick algorithm either on effectiveness or efficiency.

  17. Solid state physics

    Burns, Gerald


    Solid State Physics, International Edition covers the fundamentals and the advanced concepts of solid state physics. The book is comprised of 18 chapters that tackle a specific aspect of solid state physics. Chapters 1 to 3 discuss the symmetry aspects of crystalline solids, while Chapter 4 covers the application of X-rays in solid state science. Chapter 5 deals with the anisotropic character of crystals. Chapters 6 to 8 talk about the five common types of bonding in solids, while Chapters 9 and 10 cover the free electron theory and band theory. Chapters 11 and 12 discuss the effects of moveme

  18. Theoretical solid state physics

    Haug, Albert


    Theoretical Solid State Physics, Volume 1 focuses on the study of solid state physics. The volume first takes a look at the basic concepts and structures of solid state physics, including potential energies of solids, concept and classification of solids, and crystal structure. The book then explains single-electron approximation wherein the methods for calculating energy bands; electron in the field of crystal atoms; laws of motion of the electrons in solids; and electron statistics are discussed. The text describes general forms of solutions and relationships, including collective electron i

  19. Overhauser effects in insulating solids

    Can, T. V.; Caporini, M. A.; Mentink-Vigier, F.; Corzilius, B.; Walish, J. J.; Rosay, M.; Maas, W. E.; Baldus, M.; Vega, S.; Swager, T. M.; Griffin, R. G.


    We report magic angle spinning, dynamic nuclear polarization (DNP) experiments at magnetic fields of 9.4 T, 14.1 T, and 18.8 T using the narrow line polarizing agents 1,3-bisdiphenylene-2-phenylallyl (BDPA) dispersed in polystyrene, and sulfonated-BDPA (SA-BDPA) and trityl OX063 in glassy glycerol/water matrices. The 1H DNP enhancement field profiles of the BDPA radicals exhibit a significant DNP Overhauser effect (OE) as well as a solid effect (SE) despite the fact that these samples are insulating solids. In contrast, trityl exhibits only a SE enhancement. Data suggest that the appearance of the OE is due to rather strong electron-nuclear hyperfine couplings present in BDPA and SA-BDPA, which are absent in trityl and perdeuterated BDPA (d21-BDPA). In addition, and in contrast to other DNP mechanisms such as the solid effect or cross effect, the experimental data suggest that the OE in non-conducting solids scales favorably with magnetic field, increasing in magnitude in going from 5 T, to 9.4 T, to 14.1 T, and to 18.8 T. Simulations using a model two spin system consisting of an electron hyperfine coupled to a 1H reproduce the essential features of the field profiles and indicate that the OE in these samples originates from the zero and double quantum cross relaxation induced by fluctuating hyperfine interactions between the intramolecular delocalized unpaired electrons and their neighboring nuclei, and that the size of these hyperfine couplings is crucial to the magnitude of the enhancements. Microwave power dependent studies show that the OE saturates at considerably lower power levels than the solid effect in the same samples. Our results provide new insights into the mechanism of the Overhauser effect, and also provide a new approach to perform DNP experiments in chemical, biophysical, and physical systems at high magnetic fields.

  20. Overhauser effects in insulating solids

    Can, T. V.; Corzilius, B.; Walish, J. J.; Griffin, R. G. [Francis Bitter Magnet Laboratory, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Department of Chemistry, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Caporini, M. A.; Rosay, M.; Maas, W. E. [Bruker BioSpin, Billerica, Massachusetts 01821 (United States); Mentink-Vigier, F.; Vega, S. [Weizmann Institute of Science, Rehovot (Israel); Baldus, M. [NMR Spectroscopy, Bijvoet Center for Biomolecular Research, Department of Chemistry, Faculty of Science, Utrecht University, 3584 CH Utrecht (Netherlands); Swager, T. M. [Department of Chemistry, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States)


    We report magic angle spinning, dynamic nuclear polarization (DNP) experiments at magnetic fields of 9.4 T, 14.1 T, and 18.8 T using the narrow line polarizing agents 1,3-bisdiphenylene-2-phenylallyl (BDPA) dispersed in polystyrene, and sulfonated-BDPA (SA-BDPA) and trityl OX063 in glassy glycerol/water matrices. The {sup 1}H DNP enhancement field profiles of the BDPA radicals exhibit a significant DNP Overhauser effect (OE) as well as a solid effect (SE) despite the fact that these samples are insulating solids. In contrast, trityl exhibits only a SE enhancement. Data suggest that the appearance of the OE is due to rather strong electron-nuclear hyperfine couplings present in BDPA and SA-BDPA, which are absent in trityl and perdeuterated BDPA (d{sub 21}-BDPA). In addition, and in contrast to other DNP mechanisms such as the solid effect or cross effect, the experimental data suggest that the OE in non-conducting solids scales favorably with magnetic field, increasing in magnitude in going from 5 T, to 9.4 T, to 14.1 T, and to 18.8 T. Simulations using a model two spin system consisting of an electron hyperfine coupled to a {sup 1}H reproduce the essential features of the field profiles and indicate that the OE in these samples originates from the zero and double quantum cross relaxation induced by fluctuating hyperfine interactions between the intramolecular delocalized unpaired electrons and their neighboring nuclei, and that the size of these hyperfine couplings is crucial to the magnitude of the enhancements. Microwave power dependent studies show that the OE saturates at considerably lower power levels than the solid effect in the same samples. Our results provide new insights into the mechanism of the Overhauser effect, and also provide a new approach to perform DNP experiments in chemical, biophysical, and physical systems at high magnetic fields.

  1. What Are Solid Fats?

    ... fatty acids. Most solid fats are high in saturated fats and/or trans fats and have less monounsaturated ... Animal products containing solid fats also contain cholesterol. Saturated fats and trans fats tend to raise "bad" (LDL) ...

  2. Alabama ESI: HYDRO (Hydrography Lines and Polygons)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing coastal hydrography used in the creation of the Environmental Sensitivity Index (ESI) for Alabama. The...

  3. Virginia ESI: HYDRO (Hydrography Lines and Polygons)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing coastal hydrography used in the creation of the Environmental Sensitivity Index (ESI) for Virginia. The...

  4. Maryland ESI: HYDRO (Hydrography Lines and Polygons)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing coastal hydrography used in the creation of the Environmental Sensitivity Index (ESI) for Maryland. The...

  5. Western Alaska ESI: FISHL (Fish Lines)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for anadromous fish species in Western Alaska. Vector lines in this data set represent species occurrences...

  6. Columbia River ESI: FISHL (Fish Lines)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for anadromous fish species in Columbia River. Vector lines in this data set represent locations of...

  7. Southeast Alaska ESI: FISHL (Fish Lines)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains biological resource data for anadromous fish streams in Southeast Alaska. Vector lines in this data set represent locations of fish streams....

  8. Louisiana ESI: HYDRO (Hydrography Lines and Polygons)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing coastal hydrography used in the creation of the Environmental Sensitivity Index (ESI) for coastal...

  9. Umbilic Lines in Orientational Order

    Thomas Machon


    Full Text Available Three-dimensional orientational order in systems whose ground states possess nonzero gradients typically exhibits linelike structures or defects: λ lines in cholesterics or Skyrmion tubes in ferromagnets, for example. Here, we show that such lines can be identified as a set of natural geometric singularities in a unit vector field, the generalization of the umbilic points of a surface. We characterize these lines in terms of the natural vector bundles that the order defines and show that they give a way to localize and identify Skyrmion distortions in chiral materials—in particular, that they supply a natural representative of the Poincaré dual of the cocycle describing the topology. Their global structure leads to the definition of a self-linking number and helicity integral which relates the linking of umbilic lines to the Hopf invariant of the texture.

  10. Tetraphenylborate Solids Stability Tests

    Walker, D.D. [Westinghouse Savannah River Company, AIKEN, SC (United States)


    Tetraphenylborate solids are a potentially large source of benzene in the slurries produced in the In-Tank Precipitation (ITP) process. The stability of the solids is an important consideration in the safety analysis of the process and we desire an understanding of the factors that influence the rate of conversion of the solids to benzene. This report discusses current testing of the stability of tetraphenylborate solids.

  11. Laser cooling of solids

    Epstein, Richard I [Los Alamos National Laboratory; Sheik-bahae, Mansoor [UNM


    We present an overview of solid-state optical refrigeration also known as laser cooling in solids by fluorescence upconversion. The idea of cooling a solid-state optical material by simply shining a laser beam onto it may sound counter intuitive but is rapidly becoming a promising technology for future cryocooler. We chart the evolution of this science in rare-earth doped solids and semiconductors.

  12. A single-step pesticide extraction and clean-up multi-residue analytical method by selective pressurized liquid extraction followed by on-line solid phase extraction and ultra-high-performance liquid chromatography-tandem mass spectrometry for complex matrices.

    Rodrigues, Elsa Teresa; Pardal, Miguel Ângelo; Salgueiro-González, Noelia; Muniategui-Lorenzo, Soledad; Alpendurada, Maria Fátima


    Pesticides, a group of compounds linked to human activity, may, when in toxic levels, have a profound effect on water quality, and hence result in adverse consequences to aquatic life and ultimately to human health. Analytical challenges arise when successfully trying to determine these levels in environmental complex matrices. Therefore, fast, simple, sensitive and selective analytical methodologies for multi-residue determination of pesticides (atrazine, azoxystrobin, bentazon, λ-cyhalothrin, penoxsulam and terbuthylazine) in sediment, macrophytes (algae and aquatic plants) and aquatic animals were developed and validated. The established methods were matrix-dependent and were based on Selective Pressurized Liquid Extraction (SPLE) followed by on-line Solid Phase Extraction and Ultra Performance Liquid Chromatography-tandem Mass Spectrometry (on-line SPE-UPLC-ESI-MS/MS). This cutting-edge research methodology uses a small amount of sample, is time saving and reduces the use of organic solvents in compliance with Green Chemistry principles. The analytical features were adequate for all compounds in all studied matrices. The established methodology was applied on real marine samples and no pesticide concentrations above their respective method quantification limits were measured in sediments or aquatic plants. However, terbuthylazine was found in the macroalgae Ulva spp. (108ngg(-1)dw) and all the prospected pesticides were measured above their respective method quantification limits in the bivalve Scrobicularia plana (atrazine: 48ngg(-1)dw, azoxystrobin: 64ngg(-1)dw, bentazon: 33ngg(-1)dw, λ-cyhalothrin: 2531ngg(-1)dw, penoxsulam: 50ngg(-1)dw, and terbuthylazine: 44ngg(-1)dw).

  13. Representing Others in a Public Good Game

    Karen Evelyn Hauge


    Full Text Available In many important public good situations the decision-making power and authority is delegated to representatives who make binding decisions on behalf of a larger group. The purpose of this study is to compare contribution decisions made by individuals with contribution decisions made by group representatives. We present the results from a laboratory experiment that compares decisions made by individuals in inter-individual public good games with decisions made by representatives on behalf of their group in inter-group public good games. Our main finding is that contribution behavior differs between individuals and group representatives, but only for women. While men’s choices are equally self-interested as individuals and group representatives, women make less self-interested choices as group representatives.

  14. Represented Speech in Qualitative Health Research

    Musaeus, Peter


    Represented speech refers to speech where we reference somebody. Represented speech is an important phenomenon in everyday conversation, health care communication, and qualitative research. This case will draw first from a case study on physicians’ workplace learning and second from a case study...... on nurses’ apprenticeship learning. The aim of the case is to guide the qualitative researcher to use own and others’ voices in the interview and to be sensitive to represented speech in everyday conversation. Moreover, reported speech matters to health professionals who aim to represent the voice...... of their patients. Qualitative researchers and students might learn to encourage interviewees to elaborate different voices or perspectives. Qualitative researchers working with natural speech might pay attention to how people talk and use represented speech. Finally, represented speech might be relevant...

  15. Dynamic wetting and stress singularity on contact line

    WANG; Xiaodong; (王晓东); PENG; Xiaofeng; (彭晓峰); LEE; Duzhong; (李笃中)


    A theoretical investigation is conducted to understand the contact line movement and associated contact angle phenomena. Contact line is supposed to move on a thin precursor film, and contact line has a velocity and is subject to viscous stress on the film or geometrically on the solid surface. With the introduction of a characteristic parameter, λ′, the movement of contact line and contact angle phenomena are very well described in both physics and mathematics. The viscous shearing stress exerted by liquid on solid surface was derived, and the behavior of dynamic contact angle was recognized on rough solid surfaces. The analyses indicate that characteristic parameter λ′ is dependent upon solid wall intrinsic property and mechanical performance, and is irrelevant to liquid property. Theoretical predictions are in good agreement with available experimental data in literature.

  16. Solid State Division

    Green, P.H.; Watson, D.M. (eds.)


    This report contains brief discussions on work done in the Solid State Division of Oak Ridge National Laboratory. The topics covered are: Theoretical Solid State Physics; Neutron scattering; Physical properties of materials; The synthesis and characterization of materials; Ion beam and laser processing; and Structure of solids and surfaces. (LSP)

  17. The Tree Lines at Pipe Spring National Monument, Arizona (treeline)

    National Park Service, Department of the Interior — This is an Arc/Info coverage consisting of 7 arcs representing the tree lines at Pipe Spring National Monument, Arizona. The tree lines were collected by a Trimble...

  18. Representing Quadric Surfaces Using NURBS Surfaces



    A method for representing quadrc surfaces using NURBS is presented.By means of the necessary and sufficient conditons for NURBS curves to precisely represent circular arcs and other conics,quadric surfaces can be represented by NURBS surfaces with fewer control vertices.The method can be used not only for NURBS surface representation of quadric surfaces,but also for rounding polyhedrons.Many examples are given in the paper.

  19. Parametric Study of Liquid Contact Line Dynamics: Adhesion vs. Hydrodynamics

    Mohammad Karim, Alireza


    There are tremendous interests regarding the wettability of solid surfaces and controlling the wettability on the solid surfaces in industry, technology such as efficiency of oil recovery, micro-fluidics and nano-fluidics, drag reduction on airplane wings, efficient power plants and many other applications. To resolve such challenges, it is required to enhance the knowledge more deeply to understand the underlying physics of fluid/solid interaction at the liquid contact line that describes th...

  20. Locating Fractions on a Number Line

    Wong, Monica


    Understanding fractions remains problematic for many students. The use of the number line aids in this understanding, but requires students to recognise that a fraction represents the distance from zero to a dot or arrow marked on a number line which is a linear scale. This article continues the discussion from "Identifying Fractions on a…

  1. Solid expellant plasma generator

    Stone, Nobie H. (Inventor); Poe, Garrett D. (Inventor); Rood, Robert (Inventor)


    An improved solid expellant plasma generator has been developed. The plasma generator includes a support housing, an electrode rod located in the central portion of the housing, and a mass of solid expellant material that surrounds the electrode rod within the support housing. The electrode rod and the solid expellant material are made of separate materials that are selected so that the electrode and the solid expellant material decompose at the same rate when the plasma generator is ignited. This maintains a point of discharge of the plasma at the interface between the electrode and the solid expellant material.

  2. Solid state phenomena

    Lawrance, R


    Solid State Phenomena explores the fundamentals of the structure and their influence on the properties of solids. This book is composed of five chapters that focus on the electrical and thermal conductivities of crystalline solids. Chapter 1 describes the nature of solids, particularly metals and crystalline materials. This chapter also presents a model to evaluate crystal structure, the forces between atom pairs, and the mechanism of plastic and elastic deformation. Chapter 2 demonstrates random vibrations of atoms in a solid using a one-dimensional array, while Chapter 3 examines the resista


    Qiu Jinghui


    The author gives a dual characterization of solid cones in locally convex spaces.From this the author obtains some criteria for judging convex cones to be solid in various inds of locally convex spaces. Using a general expression of the interior of a solid cone,the author obtains a number of necessary and sufficient conditions for convex cones to be solid in the framework of Banach spaces. In particular, the author gives a dual relationship between solid cones and generalized sharp cones. The related known results are improved and extended.

  4. Snake beam: a paraxial arbitrary focal line

    Rosen, Joseph; Yariv, Amnon


    The creation of paraxial arbitrary focal lines by a Fourier computer-generated hologram is demonstrated. The desired focal line is represented by a series of connected straight line segments, each of which is implemented by a radial harmonic function located on a different radial portion of the entire hologram. Each subhologram is multiplied by appropriate linear and quadratic phase functions and is shifted by some distance from the center. The two phase factors determine the location of each...

  5. Representing Object Colour in Language Comprehension

    Connell, Louise


    Embodied theories of cognition hold that mentally representing something "red" engages the neural subsystems that respond to environmental perception of that colour. This paper examines whether implicit perceptual information on object colour is represented during sentence comprehension even though doing so does not necessarily facilitate task…

  6. Solids fluidizer-injector

    Bulicz, T.R.


    An apparatus and process are described for fluidizing solid particles by causing rotary motion of the solid particles in a fluidizing chamber by a plurality of rotating projections extending from a rotatable cylinder end wall interacting with a plurality of fixed projections extending from an opposite fixed end wall and passing the solid particles through a radial feed orifice open to the solids fluidizing chamber on one side and a solid particle utilization device on the other side. The apparatus and process are particularly suited for obtaining intermittent feeding with continual solids supply to the fluidizing chamber. The apparatus and process are suitable for injecting solid particles, such as coal, to an internal combustion engine. 3 figs.

  7. Solid Base Catalysis

    Ono, Yoshio


    The importance of solid base catalysts has come to be recognized for their environmentally benign qualities, and much significant progress has been made over the past two decades in catalytic materials and solid base-catalyzed reactions. The book is focused on the solid base. Because of the advantages over liquid bases, the use of solid base catalysts in organic synthesis is expanding. Solid bases are easier to dispose than liquid bases, separation and recovery of products, catalysts and solvents are less difficult, and they are non-corrosive. Furthermore, base-catalyzed reactions can be performed without using solvents and even in the gas phase, opening up more possibilities for discovering novel reaction systems. Using numerous examples, the present volume describes the remarkable role solid base catalysis can play, given the ever increasing worldwide importance of "green" chemistry. The reader will obtain an overall view of solid base catalysis and gain insight into the versatility of the reactions to whic...

  8. Informal Collection of Household Solid Waste in Three Towns of Anambra State, Nigeria

    Egbu Anthony; Okoroigwe Decklan


    Management of urban solid waste implies the collection, transfer, treatment recycle, reuse and disposal of such waste. Collection of urban household solid waste traditionally rests with government agencies designated with such responsibility. Solid waste collection begins from storage at the household level to the final treatment or disposal point and represents the most important aspect of urban solid waste management. Little has however been written on urban household solid waste collection...

  9. Drawing the Line

    Holm, Isak Winkel


    of a political community. This chapter contends that this shift of focus--from a 'what' question to a 'who' question of justice (Nancy Fraser)--is a recurrent feature in modern disaster fiction, not just in Kleist's short story but also, for instance, in zombie movies. First, the chapter explores the act...... of judgement that distinguishes between the inside and outside of a political community, between citizens and zombies. Second, the chapter focuses on the rhetorics applied to draw the line between rights-bearers and the rightless. ‘Prophetic’ speech, echoing the language of the Old Testament prophets, is vital...... to understanding the question of justice in much disaster fiction. Third and last, the chapter discusses the relationship between the reader's aesthetic experience of Kleist's story, and the political act of judgement represented in the story: in other words, the relationship between the ‘how’ question of literary...

  10. Drawing the Line

    Holm, Isak Winkel


    of judgement that distinguishes between the inside and outside of a political community, between citizens and zombies. Second, the chapter focuses on the rhetorics applied to draw the line between rights-bearers and the rightless. ‘Prophetic’ speech, echoing the language of the Old Testament prophets, is vital...... of a political community. This chapter contends that this shift of focus--from a 'what' question to a 'who' question of justice (Nancy Fraser)--is a recurrent feature in modern disaster fiction, not just in Kleist's short story but also, for instance, in zombie movies. First, the chapter explores the act...... to understanding the question of justice in much disaster fiction. Third and last, the chapter discusses the relationship between the reader's aesthetic experience of Kleist's story, and the political act of judgement represented in the story: in other words, the relationship between the ‘how’ question of literary...

  11. Columbia River ESI: SOCECON (Socioeconomic Resource Points and Lines)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector points and lines representing human-use resource data for Columbia River. In the data set, vector points represent aquaculture sites,...

  12. On the validation of solids represented with the international standards for geographic information

    Ledoux, H.


    The international standards for geographic information provide unambiguous definitions of geometric primitives, with the aim of fostering exchange and interoperability in the geographical information system (GIS) community. In two dimensions, the standards are wellaccepted and there are algorithms (

  13. Survey of industrial dryers for solids

    Richardson, A.S.; Jensen, W.P.


    A study was directed toward obtaining data for an estimate of the current and anticipated energy demand for industrial drying operations for solid materials. Twenty-seven dryer types, including those utilizing both direct and indirect heat sources, were identified and are described. Results of an analysis made on 17 dryer types and based on data obtained from several of the largest solids dryer manufacturers indicate that industrial dryers for solids currently consume about 1.3 x 10/sup 18/ J (1.2 quads) of energy. This represents nearly 4 percent of the total United States industrial energy use. Several examples of steps being taken by industry to reduce energy requirements for solids drying are included. Still further action to reduce energy consumption of dryers is possible; implementation will depend upon the extent to which incentives are provided by fuel scarcity, fuel costs, and the perfection of new technology by industry alone and in programs with the Federal Government.

  14. Solid-state diffusion in amorphous zirconolite

    Yang, C.; Dove, M. T.; Trachenko, K. [School of Physics and Astronomy, Queen Mary University of London, Mile End Road, London E1 4NS (United Kingdom); Zarkadoula, E. [School of Physics and Astronomy, Queen Mary University of London, Mile End Road, London E1 4NS (United Kingdom); Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-6138 (United States); Todorov, I. T. [STFC Daresbury Laboratory, Warrington WA4 1EP (United Kingdom); Geisler, T. [Steinmann-Institut für Geologie, Mineralogie und Paläontologie, University of Bonn, D-53115 Bonn (Germany); Brazhkin, V. V. [Institute for High Pressure Physics, RAS, 142190 Moscow (Russian Federation)


    We discuss how structural disorder and amorphization affect solid-state diffusion, and consider zirconolite as a currently important case study. By performing extensive molecular dynamics simulations, we disentangle the effects of amorphization and density, and show that a profound increase of solid-state diffusion takes place as a result of amorphization. Importantly, this can take place at the same density as in the crystal, representing an interesting general insight regarding solid-state diffusion. We find that decreasing the density in the amorphous system increases pre-factors of diffusion constants, but does not change the activation energy in the density range considered. We also find that atomic species in zirconolite are affected differently by amorphization and density change. Our microscopic insights are relevant for understanding how solid-state diffusion changes due to disorder and for building predictive models of operation of materials to be used to encapsulate nuclear waste.

  15. Defining and Generating Axial Lines from Street Center Lines for better Understanding of Urban Morphologies

    Liu, Xintao


    Axial lines are defined as the longest visibility lines for representing individual linear spaces in urban environments. The least number of axial lines that cover the free space of an urban environment constitute what is often called an axial map. This is a fundamental tool in space syntax, a theory developed by Bill Hillier and his colleagues for characterizing the underlying urban morphologies. For a long time, generating axial lines with help of some graphic software has been a tedious manual process that is criticized for being time consuming, subjective, or even arbitrary. In this paper, we redefine axial lines as the least number of individual straight line segments mutually intersected along natural streets that are generated from street center lines using the Gestalt principle of good continuity. Based on this new definition, we develop an automatic solution to generating the newly defined axial lines from street center lines. We apply this solution to six typical street networks (three from North Am...

  16. Survey of Environmental Technician Employment Needs in Solid Waste Occupations.

    Sen, Satyakam

    A study was done to determine the extent of current employment, expected job growth, necessary job skills, and the educational background preferred by employers in the solid waste field. Eight different questionnaires were developed and representatives of the solid waste management industry from 1,004 state agencies, municipalities, and private…

  17. Millimeter Continuum Observations Of Disk Solids

    Andrews, Sean


    I will offer a condensed overview of some key issues in protoplanetary disk research that makes use interferometric measurements of the millimeter-wavelength continuum emitted by their solid particles. Several lines of evidence now qualitatively support theoretical models for the growth and migration of disk solids, but also advertise a quantitative tension with the traditional efficiency of that evolution. New observations of small-scale substructures in disks might both reconcile the conflict and shift our focus in the mechanics of planet formation.

  18. 7 CFR 1205.20 - Representative period.


    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Representative period. 1205.20 Section 1205.20 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... period means the 2006 calendar year....

  19. Enhancing policy innovation by redesigning representative democracy

    Sørensen, Eva


    . Two Danish case studies indicate that collaboration between politicians and relevant and affected stakeholders can promote policy innovation, but also that a redesign of representative democracy is needed in order to establish a productive combination of political leadership, competition...

  20. REFractions: The Representing Equivalent Fractions Game

    Tucker, Stephen I.


    Stephen Tucker presents a fractions game that addresses a range of fraction concepts including equivalence and computation. The REFractions game also improves students' fluency with representing, comparing and adding fractions.

  1. Caspar Wessel on representing complex numbers (1799)

    Branner, Bodil


    In celebration of the bicentenary of the publication of Wessel's paper on the geometric interpretation of complex numbers it is decsribed how Wessel used complex numbers to represent directions in surveying, at least as early as 1787.......In celebration of the bicentenary of the publication of Wessel's paper on the geometric interpretation of complex numbers it is decsribed how Wessel used complex numbers to represent directions in surveying, at least as early as 1787....

  2. Quadratic forms representing all odd positive integers

    Rouse, Jeremy


    We consider the problem of classifying all positive-definite integer-valued quadratic forms that represent all positive odd integers. Kaplansky considered this problem for ternary forms, giving a list of 23 candidates, and proving that 19 of those represent all positive odds. (Jagy later dealt with a 20th candidate.) Assuming that the remaining three forms represent all positive odds, we prove that an arbitrary, positive-definite quadratic form represents all positive odds if and only if it represents the odd numbers from 1 up to 451. This result is analogous to Bhargava and Hanke's celebrated 290-theorem. In addition, we prove that these three remaining ternaries represent all positive odd integers, assuming the generalized Riemann hypothesis. This result is made possible by a new analytic method for bounding the cusp constants of integer-valued quaternary quadratic forms $Q$ with fundamental discriminant. This method is based on the analytic properties of Rankin-Selberg $L$-functions, and we use it to prove...

  3. Linee meridiane interne in Sicilia.

    Lanciano, N.; Celi, V.


    The authors carry out a review of the six meridian lines at camera obscura extant in Sicily. The meriterranean island evidently represented from this point of view an important reference mark and playground for astronomers and mathematicians. So, the sites in which this works was realized mark the stages of a cultural route in which science and art are joined in a sole and marvellous way.

  4. Solid state video cameras

    Cristol, Y


    Solid State Video Cameras reviews the state of the art in the field of solid-state television cameras as compiled from patent literature. Organized into 10 chapters, the book begins with the basic array types of solid-state imagers and appropriate read-out circuits and methods. Documents relating to improvement of picture quality, such as spurious signal suppression, uniformity correction, or resolution enhancement, are also cited. The last part considerssolid-state color cameras.

  5. Solid propellant rocket motor

    Dowler, W. L.; Shafer, J. I.; Behm, J. W.; Strand, L. D. (Inventor)


    The characteristics of a solid propellant rocket engine with a controlled rate of thrust buildup to a desired thrust level are discussed. The engine uses a regressive burning controlled flow solid propellant igniter and a progressive burning main solid propellant charge. The igniter is capable of operating in a vacuum and sustains the burning of the propellant below its normal combustion limit until the burning propellant surface and combustion chamber pressure have increased sufficiently to provide a stable chamber pressure.

  6. World-line perturbation theory

    van Holten, Jan-Willem


    The motion of a compact body in space and time is commonly described by the world line of a point representing the instantaneous position of the body. In General Relativity such a world-line formalism is not quite straightforward because of the strict impossibility to accommodate point masses and rigid bodies. In many situations of practical interest it can still be made to work using an effective hamiltonian or energy-momentum tensor for a finite number of collective degrees of freedom of the compact object. Even so exact solutions of the equations of motion are often not available. In such cases families of world lines of compact bodies in curved space-times can be constructed by a perturbative procedure based on generalized geodesic deviation equations. Examples for simple test masses and for spinning test bodies are presented.

  7. Spent Pot Lining Characterization Framework

    Ospina, Gustavo; Hassan, Mohamed I.


    Spent pot lining (SPL) management represents a major concern for aluminum smelters. There are two key elements for spent pot lining management: recycling and safe storage. Spent pot lining waste can potentially have beneficial uses in co-firing in cement plants. Also, safe storage of SPL is of utmost importance. Gas generation of SPL reaction with water and ignition sensitivity must be studied. However, determining the feasibility of SPL co-firing and developing the required procedures for safe storage rely on determining experimentally all the necessary SPL properties along with the appropriate test methods, recognized by emissions standards and fire safety design codes. The applicable regulations and relevant SPL properties for this purpose are presented along with the corresponding test methods.

  8. Spent Pot Lining Characterization Framework

    Ospina, Gustavo; Hassan, Mohamed I.


    Spent pot lining (SPL) management represents a major concern for aluminum smelters. There are two key elements for spent pot lining management: recycling and safe storage. Spent pot lining waste can potentially have beneficial uses in co-firing in cement plants. Also, safe storage of SPL is of utmost importance. Gas generation of SPL reaction with water and ignition sensitivity must be studied. However, determining the feasibility of SPL co-firing and developing the required procedures for safe storage rely on determining experimentally all the necessary SPL properties along with the appropriate test methods, recognized by emissions standards and fire safety design codes. The applicable regulations and relevant SPL properties for this purpose are presented along with the corresponding test methods.

  9. Understanding solid state physics

    Holgate, Sharon Ann


    Where Sharon Ann Holgate has succeeded in this book is in packing it with examples of the application of solid state physics to technology. … All the basic elements of solid state physics are covered … . The range of materials is good, including as it does polymers and glasses as well as crystalline solids. In general, the style makes for easy reading. … Overall this book succeeds in showing the relevance of solid state physics to the modern world … .-Contemporary Physics, Vol. 52, No. 2, 2011I was indeed amused and inspired by the wonderful images throughout the book, carefully selected by th

  10. Do regional climate models represent regional climate?

    Maraun, Douglas; Widmann, Martin


    When using climate change scenarios - either from global climate models or further downscaled - to assess localised real world impacts, one has to ensure that the local simulation indeed correctly represents the real world local climate. Representativeness has so far mainly been discussed as a scale issue: simulated meteorological variables in general represent grid box averages, whereas real weather is often expressed by means of point values. As a result, in particular simulated extreme values are not directly comparable with observed local extreme values. Here we argue that the issue of representativeness is more general. To illustrate this point, assume the following situations: first, the (GCM or RCM) simulated large scale weather, e.g., the mid-latitude storm track, might be systematically distorted compared to observed weather. If such a distortion at the synoptic scale is strong, the simulated local climate might be completely different from the observed. Second, the orography even of high resolution RCMs is only a coarse model of true orography. In particular in mountain ranges the simulated mesoscale flow might therefore considerably deviate from the observed flow, leading to systematically displaced local weather. In both cases, the simulated local climate does not represent observed local climate. Thus, representativeness also encompasses representing a particular location. We propose to measure this aspect of representativeness for RCMs driven with perfect boundary conditions as the correlation between observations and simulations at the inter-annual scale. In doing so, random variability generated by the RCMs is largely averaged out. As an example, we assess how well KNMIs RACMO2 RCM at 25km horizontal resolution represents winter precipitation in the gridded E-OBS data set over the European domain. At a chosen grid box, RCM precipitation might not be representative of observed precipitation, in particular in the rain shadow of major moutain ranges

  11. Understanding and Representing Natural Language Meaning.


    lobby waste basket of the crowded Pompidou Center in exchange for the girl. Asking that the police not intervene, Boullard arranged for the delivery of...perception," Tech. Rept3. 91 and 95, Center for Human Information Processing, USCD. Minsky, M. 1980. "K-lines: A theory of memory," C Sciencg, vol. 4, pp. 117

  12. Dichromatic confusion lines and color vision models.

    Fry, G A


    An attempt has been made to explain how dichromatic confusion lines can be used in building a model for color vision. In the König color vision model the fundamental colors are located on the mixture diagram at the copunctal points for protanopes, deuteranopes, and tritanopes. In Fry's model the copunctal points fall on the alychne and cannot represent the fundamental colors. On a constant luminance diagram the confusion lines for the different dichromats are sets of parallel lines. This arrangement of the confusion lines can be explained in terms of a zone theory of color vision.

  13. CORA: Emission Line Fitting with Maximum Likelihood

    Ness, Jan-Uwe; Wichmann, Rainer


    CORA analyzes emission line spectra with low count numbers and fits them to a line using the maximum likelihood technique. CORA uses a rigorous application of Poisson statistics. From the assumption of Poissonian noise, the software derives the probability for a model of the emission line spectrum to represent the measured spectrum. The likelihood function is used as a criterion for optimizing the parameters of the theoretical spectrum and a fixed point equation is derived allowing an efficient way to obtain line fluxes. CORA has been applied to an X-ray spectrum with the Low Energy Transmission Grating Spectrometer (LETGS) on board the Chandra observatory.

  14. Propagating Instabilities in Solids

    Kyriakides, Stelios


    Instability is one of the factors which limit the extent to which solids can be loaded or deformed and plays a pivotal role in the design of many structures. Such instabilities often result in localized deformation which precipitates catastrophic failure. Some materials have the capacity to recover their stiffness following a certain amount of localized deformation. This local recovery in stiffness arrests further local deformation and spreading of the instability to neighboring material becomes preferred. Under displacement controlled loading the propagation of the transition fronts can be achieved in a steady-state manner at a constant stress level known as the propagation stress. The stresses in the transition fronts joining the highly deformed zone to the intact material overcome the instability nucleation stresses and, as a result, the propagation stress is usually much lower than the stress required to nucleate the instability. The classical example of this class of material instabilities is L/"uders bands which tend to affect mild steels and other metals. Recent work has demonstrated that propagating instabilities occur in several other materials. Experimental and analytical results from four examples will be used to illustrate this point: First the evolution of L=FCders bands in mild steel strips will be revisited. The second example involves the evolution of stress induced phase transformations (austenite to martensite phases and the reverse) in a shape memory alloy under displacement controlled stretching. The third example is the crushing behavior of cellular materials such as honeycombs and foams made from metals and polymers. The fourth example involves the axial broadening/propagation of kink bands in aligned fiber/matrix composites under compression. The microstructure and, as a result, the micromechanisms governing the onset, localization, local arrest and propagation of instabilities in each of the four materials are vastly different. Despite this

  15. Central line infections - hospitals

    ... infection; Central venous catheter - infection; CVC - infection; Central venous device - infection; Infection control - central line infection; Nosocomial infection - central line infection; Hospital acquired ...

  16. Cellular Automata Model for Elastic Solid Material

    DONG Yin-Feng; ZHANG Guang-Cai; XU Ai-Guo; GAN Yan-Biao


    The Cellular Automaton (CA) modeling and simulation of solid dynamics is a long-standing difficult problem.In this paper we present a new two-dimensional CA model for solid dynamics.In this model the solid body is represented by a set of white and black particles alternatively positioned in the x-and y-directions.The force acting on each particle is represented by the linear summation of relative displacements of the nearest-neighboring particles.The key technique in this new model is the construction of eight coefficient matrices.Theoretical and numerical analyses show that the present model can be mathematically described by a conservative system.So,it works for elastic material.In the continuum limit the CA model recovers the well-known Navier equation.The coefficient matrices are related to the shear module and Poisson ratio of the material body.Compared with previous CA model for solid body,this model realizes the natural coupling of deformations in the x-and y-directions.Consequently,the wave phenomena related to the Poisson ratio effects are successfully recovered.This work advances significantly the CA modeling and simulation in the field of computational solid dynamics.

  17. Analysis of Vortex Line Cutting and Reconnection by a Blade

    Saunders, Curtis; Marshall, Jeffrey


    The essence of vortex reconnection involves the cutting of vortex lines originating from one region and reconnecting to vortex lines originating from another region via the diffusion-regulated annihilation of vorticity. Vortex cutting by a blade is a special case of the more general class of vortex reconnection problems, with an important difference being that vorticity is generated at the reconnection site. In this study, a series of Navier-Stokes simulations of orthogonal vortex cutting by a blade with different values of vortex strength are reported. The three phases of vortex reconnection identified in the literature are found to have counterparts for the vortex cutting problem. However numerous differences between the mechanics of vortex cutting and reconnection within each phase are discussed. In addition, comparisons are made between the temporal changes of the maximum and minimum components of vorticity for vortices of differing strength but still within the vortex cutting regime. The vortex cutting results are also compared with predictions of a simple analytical model that incorporates the key elements of a stretched vorticity field interacting with a solid surface, which is representative of the vortex cutting mechanism near the blade leading edge. Funded by National Science Foundation project DGE-1144388.

  18. Representative Democracy in Australian Local Government

    Colin Hearfield


    Full Text Available In an assessment of representative democracy in Australian local government, this paper considers long-run changes in forms of political representation, methods of vote counting, franchise arrangements, numbers of local government bodies and elected representatives, as well as the thorny question of constitutional recognition. This discussion is set against the background of ongoing tensions between the drive for economic efficiency and the maintenance of political legitimacy, along with more deep-seated divisions emerging from the legal relationship between local and state governments and the resultant problems inherent in local government autonomy versus state intervention.

  19. Representative Sampling for reliable data analysis

    Petersen, Lars; Esbensen, Kim Harry


    The Theory of Sampling (TOS) provides a description of all errors involved in sampling of heterogeneous materials as well as all necessary tools for their evaluation, elimination and/or minimization. This tutorial elaborates on—and illustrates—selected central aspects of TOS. The theoretical...... regime in order to secure the necessary reliability of: samples (which must be representative, from the primary sampling onwards), analysis (which will not mean anything outside the miniscule analytical volume without representativity ruling all mass reductions involved, also in the laboratory) and data...

  20. Representing Context in Hypermedia Data Models

    Hansen, Frank Allan


    As computers and software systems move beyond the desktopand into the physical environments we live and workin, the systems are required to adapt to these environmentsand the activities taking place within them. Making applicationscontext-aware and representing context informationalong side...... application data can be a challenging task. Thispaper describes how digital context traditionally has beenrepresented in hypermedia data models and how this representationcan scale to also represent physical context. TheHyCon framework and data model, designed for the developmentof mobile context...

  1. Representing uncertainty on model analysis plots

    Smith, Trevor I.


    Model analysis provides a mechanism for representing student learning as measured by standard multiple-choice surveys. The model plot contains information regarding both how likely students in a particular class are to choose the correct answer and how likely they are to choose an answer consistent with a well-documented conceptual model. Unfortunately, Bao's original presentation of the model plot did not include a way to represent uncertainty in these measurements. I present details of a method to add error bars to model plots by expanding the work of Sommer and Lindell. I also provide a template for generating model plots with error bars.

  2. Representative Sampling for reliable data analysis

    Petersen, Lars; Esbensen, Kim Harry


    regime in order to secure the necessary reliability of: samples (which must be representative, from the primary sampling onwards), analysis (which will not mean anything outside the miniscule analytical volume without representativity ruling all mass reductions involved, also in the laboratory) and data...... analysis (“data” do not exist in isolation of their provenance). The Total Sampling Error (TSE) is by far the dominating contribution to all analytical endeavours, often 100+ times larger than the Total Analytical Error (TAE).We present a summarizing set of only seven Sampling Unit Operations (SUOs...

  3. Solid and Liquid Waste Drying Bag

    Litwiller, Eric (Inventor); Hogan, John A. (Inventor); Fisher, John W. (Inventor)


    Method and system for processing waste from human activities, including solids, liquids and vapors. A fluid-impermeable bag, lined with a liquid-impermeable but vapor-permeable membrane, defining an inner bag, is provided. A vacuum force is provided to extract vapors so that the waste is moved toward a selected region in the inner bag, extracted vapors, including the waste vapors and vaporized portions of the waste liquids are transported across the membrane, and most or all of the solids remain within the liner. Extracted vapors are filtered, and sanitized components thereof are isolated and optionally stored. The solids remaining within the liner are optionally dried and isolated for ultimate disposal.

  4. Hanford Site Solid Waste Acceptance Criteria


    This manual defines the Hanford Site radioactive, hazardous, and sanitary solid waste acceptance criteria. Criteria in the manual represent a guide for meeting state and federal regulations; DOE Orders; Hanford Site requirements; and other rules, regulations, guidelines, and standards as they apply to acceptance of radioactive and hazardous solid waste at the Hanford Site. It is not the intent of this manual to be all inclusive of the regulations; rather, it is intended that the manual provide the waste generator with only the requirements that waste must meet in order to be accepted at Hanford Site TSD facilities.

  5. Hanford Site Solid Waste Acceptance Criteria


    This manual defines the Hanford Site radioactive, hazardous, and sanitary solid waste acceptance criteria. Criteria in the manual represent a guide for meeting state and federal regulations; DOE Orders; Hanford Site requirements; and other rules, regulations, guidelines, and standards as they apply to acceptance of radioactive and hazardous solid waste at the Hanford Site. It is not the intent of this manual to be all inclusive of the regulations; rather, it is intended that the manual provide the waste generator with only the requirements that waste must meet in order to be accepted at Hanford Site TSD facilities.

  6. Applied mechanics of solids

    Bower, Allan F


    Modern computer simulations make stress analysis easy. As they continue to replace classical mathematical methods of analysis, these software programs require users to have a solid understanding of the fundamental principles on which they are based. Develop Intuitive Ability to Identify and Avoid Physically Meaningless Predictions Applied Mechanics of Solids is a powerful tool for understanding how to take advantage of these revolutionary computer advances in the field of solid mechanics. Beginning with a description of the physical and mathematical laws that govern deformation in solids, the text presents modern constitutive equations, as well as analytical and computational methods of stress analysis and fracture mechanics. It also addresses the nonlinear theory of deformable rods, membranes, plates, and shells, and solutions to important boundary and initial value problems in solid mechanics. The author uses the step-by-step manner of a blackboard lecture to explain problem solving methods, often providing...

  7. Attributes Heeded When Representing an Osmosis Problem.

    Zuckerman, June Trop

    Eighteen high school science students were involved in a study to determine what attributes in the problem statement they need when representing a typical osmosis problem. In order to realize this goal students were asked to solve problems aloud and to explain their answers. Included as a part of the results are the attributes that the students…

  8. A Framework for Representing Moving Objects

    Becker, Ludger; Blunck, Henrik; Hinrichs, Klaus


    We present a framework for representing the trajectories of moving objects and the time-varying results of operations on moving objects. This framework supports the realization of discrete data models of moving objects databases, which incorporate representations of moving objects based on non-li...

  9. 26 CFR 601.502 - Recognized representative.


    .... 230; (4) Enrolled actuary. Any individual who is enrolled as an actuary by and is in active status with the Joint Board for the Enrollment of Actuaries pursuant to 29 U.S.C. 1242. (5) Other individuals... actuaries, and others); (3) I am authorized to represent the taxpayer(s) identified in the power of...

  10. Developing Creativity and Abstraction in Representing Data

    South, Andy


    Creating charts and graphs is all about visual abstraction: the process of representing aspects of data with imagery that can be interpreted by the reader. Children may need help making the link between the "real" and the image. This abstraction can be achieved using symbols, size, colour and position. Where the representation is close to what…

  11. 在线固相萃取-超高效液相色谱-串联质谱法测定乳制品中双酚A等4种内分泌干扰物%Determination of 4 Environmental Endocrine Disruptors Involving Bisphenol A in Dairy Products by On-line Solid Phase Extraction Coupled with Liquid Chromatography-Tandem Mass Spectrometry

    张品; 张晶; 陈洁君; 段鹤君; 邵兵


    A simple analytical method by means of on-line solid phase extraction followed liquid chromatography-tandem mass spectrometry ( SPE-LC-MS/MS) was developed for the simultaneous quantitation of 4 endocrine disruptors ( triclosan, triclocarban, bisphenol A and nonylphenol) in dairy products. Infant formula and milk samples were dissolved in acetic acid buffer and hydrolyzed by β-glucuronidase/arylsulfatase. Acetonitrile was used as the extract. Then, the mixture was freeze-centrifuged for 10 min and the supernatant was diluted with water, and analyzed via on-line SPE-LC-MS/MS. The sample extracts were concentrated by an Xbridge C8 cartridge and separated on a BEH C18 column with a gradient mobile phase of methanol and water; then analyzed by triple quadrupole mass spectrometry. Mass acquisition was conducted under negative electrospray ionization mode. Quantification was performed by isotopic internal standard calibration. Acceptable linearity (R2>0. 99) was achieved over the range of 0. 005-5. 0 μg/L, with limits of quantification of 0. 03-1. 0μg/kg. Average recoveries of four target compounds (spiked at three concentration levels) ranged from 80. 2%-106. 7%,with relative standard deviation less than 15%. Due to its rapidity, simplicity, and high sensitivity, the method is suitable for the analysis of endocrine disruptors in dairy products. It has been applied in the analysis of raw milk and milk products collected in Beijing. As a result, nonylphenol was found with a high detectable frequency.%建立了乳制品中三氯生、三氯卡班、双酚A和壬基酚4种内分泌干扰物的在线固相萃取超高压液相色谱-串联质谱(On-line SPE LC-MS/MS)检测方法。液态乳制品或奶粉样品中加入乙酸缓冲液,目标物经β-葡糖醛酸苷肽酶/芳基磺酸酯酶酶解后,用乙腈提取,冷冻离心10 min后,取上清液,用水稀释,在线固相萃取串联质谱法测定。样品溶液经Xbridge C8柱富集,BEH C18色谱柱分离,甲醇和

  12. Principles of high resolution NMR in solids

    Mehring, Michael


    The field of Nuclear Magnetic Resonance (NMR) has developed at a fascinating pace during the last decade. It always has been an extremely valuable tool to the organic chemist by supplying molecular "finger print" spectra at the atomic level. Unfortunately the high resolution achievable in liquid solutions could not be obtained in solids and physicists and physical chemists had to live with unresolved lines open to a wealth of curve fitting procedures and a vast amount of speculations. High resolution NMR in solids seemed to be a paradoxon. Broad structure­ less lines are usually encountered when dealing with NMR in solids. Only with the recent advent of mUltiple pulse, magic angle, cross-polarization, two-dimen­ sional and multiple-quantum spectroscopy and other techniques during the last decade it became possible to resolve finer details of nuclear spin interactions in solids. I have felt that graduate students, researchers and others beginning to get involved with these techniques needed a book which trea...

  13. The Last Line Effect

    Beller, M.; Zaidman, A.E.; Karpov, A.


    Micro-clones are tiny duplicated pieces of code; they typically comprise only a few statements or lines. In this paper, we expose the “last line effect,” the phenomenon that the last line or statement in a micro-clone is much more likely to contain an error than the previous lines or statements. We

  14. The Language of Lines.

    Breig-Allen, Cheryl; Hill, Janet; Geismar-Ryan, Lori; Cadwell, Louise Boyd


    Describes a project about lines in the environment used with 2- and 3-year olds and based on the Reggio Emilia approach. Activities included making tracks with riding toys, drawing lines on papers, seeing cloud lines, and making lines with yarn and Cuisenaire rods. Shows how young children's observations and ongoing discoveries can uncover their…

  15. A New Fine Damping Method for Solid ESG Rotor

    LIU Chun-ning; TIAN Wei-feng; JIN Zhi-hua


    For the electrostatically suspended gyro(ESG) with solid rotor, because the equatorial photoelectric sensor won't sense the equatorial marking line and output the correct damping control information when the nutation angle is small, the active damping with equatorial marking line will bring considerable error. The passive damping method by applying strong DC magnetic field requires too much time. So an active damping method by longitude marking lines is proposed to fulfill the fine damping for solid ESG rotor. The shape of rotor marking lines and the principle of fine damping are introduced. The simulation results prove that this fine damping method can effectively solve the problem of damping error introduced by active damping with equatorial marking line. The estimating results for damping time indicate that the fine damping time is less than 10 percent of passive damping time.

  16. Eulerian method for fluid-structure interaction and submerged solid-solid contact problems

    Valkov, Boris; Kamrin, Ken


    We present a fully Eulerian, blurred-interface numerical method for fluid-structure interaction (FSI) with extension to the case of fluid-immersed solids interacting through contact. The method uses the Eulerian-frame Reference Map Technique (RMT) to represent the solid phase(s), permitting simulation of large-deformation constitutive behaviors. We demonstrate the method with multiple examples involving a compressible Navier-Stokes fluid coupled to a neo-Hookean solid. We verify the method's convergence. The algorithm is faster and more stable than previous methods based on RMT. It is easily appended with a contact subroutine for multiple solids interacting within fluid, which we introduce and demonstrate with two examples.

  17. Multifunctional solid/solid phononic crystal

    Swinteck, N.; Vasseur, J. O.; Hladky-Hennion, A. C.; Croënne, C.; Bringuier, S.; Deymier, P. A.


    A two-dimensional, solid/solid phononic crystal (PC) comprised a square array of steel cylinders in epoxy is shown to perform a variety of spectral, wave vector, and phase-space functions. Over a range of operating frequencies, the PC's elastic band structure shows uniquely shaped equifrequency contours that are only accessible to excitations of longitudinal polarization. Under this condition, the PC is shown to behave as (1) an acoustic wave collimator, (2) a defect-less wave guide, (3) a directional source for elastic waves, (4) an acoustic beam splitter, (5) a phase-control device, and (6) a k-space multiplexer. Wave vector diagrams and finite-difference time-domain simulations are employed to authenticate the above mentioned capabilities.

  18. Climate Change and the Representative Agent

    Howarth, R.B. [Environmental Studies Program, Dartmouth College, Hanover, New Hampshire 03755 (United States)


    The artifice of an infinitely-lived representative agent is commonly invoked to balance the present costs and future benefits of climate stabilization policies. Since actual economies are populated by overlapping generations of finite-lived persons, this approach begs important questions of welfare aggregation. This paper compares the results of representative agent and overlapping generations models that are numerically calibrated based on standard assumptions regarding climate economy interactions. Under two social choice rules - Pareto efficiency and classical utilitarianism - the models generate closely similar simulation results. In the absence of policies to redistribute income between present and future generations, efficient rates of carbon dioxide emissions abatement rise from 15 to 20% between the years 2000 and 2105. Under classical utilitarianism, in contrast, optimal control rates rise from 48 to 79% this same period. 23 refs.

  19. Representing Boolean Functions by Decision Trees

    Chikalov, Igor


    A Boolean or discrete function can be represented by a decision tree. A compact form of decision tree named binary decision diagram or branching program is widely known in logic design [2, 40]. This representation is equivalent to other forms, and in some cases it is more compact than values table or even the formula [44]. Representing a function in the form of decision tree allows applying graph algorithms for various transformations [10]. Decision trees and branching programs are used for effective hardware [15] and software [5] implementation of functions. For the implementation to be effective, the function representation should have minimal time and space complexity. The average depth of decision tree characterizes the expected computing time, and the number of nodes in branching program characterizes the number of functional elements required for implementation. Often these two criteria are incompatible, i.e. there is no solution that is optimal on both time and space complexity. © Springer-Verlag Berlin Heidelberg 2011.

  20. Data structures and apparatuses for representing knowledge

    Hohimer, Ryan E; Thomson, Judi R; Harvey, William J; Paulson, Patrick R; Whiting, Mark A; Tratz, Stephen C; Chappell, Alan R; Butner, Robert S


    Data structures and apparatuses to represent knowledge are disclosed. The processes can comprise labeling elements in a knowledge signature according to concepts in an ontology and populating the elements with confidence values. The data structures can comprise knowledge signatures stored on computer-readable media. The knowledge signatures comprise a matrix structure having elements labeled according to concepts in an ontology, wherein the value of the element represents a confidence that the concept is present in an information space. The apparatus can comprise a knowledge representation unit having at least one ontology stored on a computer-readable medium, at least one data-receiving device, and a processor configured to generate knowledge signatures by comparing datasets obtained by the data-receiving devices to the ontologies.

  1. Representing a public that does not exist

    Korsgaard, Morten Timmermann

    and function of the teacher. Confronted by this teachers and educationalists in Denmark have chosen different paths. One current returns to nationalistic and traditional educational ideals and another accepts the global agenda and attempts to find a new form of legitimacy within the ‘what works’ framework......In her seminal essay ‘The Crisis in Education’ Hannah Arendt presents teachers with the challenge of having to represent a world that is becoming out of joint. This means that the teacher stands as a representative of a world that is becoming increasingly inexplicable and incomprehensible......, and the only way of retaining any form of authority (and legitimacy as a teacher) is to remain loyal to the task of presenting this world to the child. This challenge presents itself acutely in the form of a global reform agenda that legitimizes standardisation and accountability while eroding the authority...

  2. Can Monkeys (Macaca mulatta) Represent Invisible Displacement?

    Filion, Christine M.; Washburn, David A.; Gulledge, Jonathan P.


    Four experiments were conducted to assess whether or not rhesus macaques (Macaca mulatta) could represent the unperceived movements of a stimulus. Subjects were tested on 2 computerized tasks, HOLE (monkeys) and LASER (humans and monkeys), in which subjects needed to chase or shoot at, respectively, a moving target that either remained visible or became invisible for a portion of its path of movement. Response patterns were analyzed and compared between target-visible and target-invisible conditions. Results of Experiments 1, 2, and 3 demonstrated that the monkeys are capable of extrapolating movement. That this extrapolation involved internal representation of the target's invisible movement was suggested but not confirmed. Experiment 4, however, demonstrated that the monkeys are capable of representing the invisible displacements of a stimulus.

  3. Representing exact number visually using mental abacus.

    Frank, Michael C; Barner, David


    Mental abacus (MA) is a system for performing rapid and precise arithmetic by manipulating a mental representation of an abacus, a physical calculation device. Previous work has speculated that MA is based on visual imagery, suggesting that it might be a method of representing exact number nonlinguistically, but given the limitations on visual working memory, it is unknown how MA structures could be stored. We investigated the structure of the representations underlying MA in a group of children in India. Our results suggest that MA is represented in visual working memory by splitting the abacus into a series of columns, each of which is independently stored as a unit with its own detailed substructure. In addition, we show that the computations of practiced MA users (but not those of control participants) are relatively insensitive to verbal interference, consistent with the hypothesis that MA is a nonlinguistic format for exact numerical computation.

  4. Representativeness and significance factors in ESP texts

    Alejandro Curado Fuentes


    Full Text Available The development of communicative approaches and strategies in specialized discourse has led to revising notions of representative and significant language . Particularly in the work with academic genres, in science and technology (EST settings such as our own institution, the need for determining these factors is ever growing. The application of empirical resources such as specific language corpora, in fact, becomes convenient. In this paper, the aim is to specify the type of corpus linguistic representativeness and significance sought in the case of teaching English to our groups of Computer Science students. In that scope, we present data and samples on which to base our suggestions and claims regarding the exploitation of textual material.

  5. Meeting staff representatives of the European Agencies

    Staff Association


      The AASC (Assembly of Agency Staff Committee) held its 27th Meeting of the specialized European Agencies on 26 and 27 May on the premises of the OHIM (Office for Harmonization in the Internal Market) in Alicante, Spain. Two representatives of the CERN Staff Association, in charge of External Relations, attended as observers. This participation is a useful complement to regular contacts we have with FICSA (Federation of International Civil Servants' Associations), which groups staff associations of the UN Agencies, and the annual CSAIO conferences (Conference of Staff Associations of International Organizations), where each Autumn representatives of international organizations based in Europe meet to discuss themes of common interest to better promote and defend the rights of the international civil servants. All these meetings allow us to remain informed on items that are directly or indirectly related to employment and social conditions of our colleagues in other international and Europ...

  6. Low-Dimensional Solids

    Bruce, Duncan W; O'Hare, Dermot


    With physical properties that often may not be described by the transposition of physical laws from 3D space across to 2D or even 1D space, low-dimensional solids exhibit a high degree of anisotropy in the spatial distribution of their chemical bonds. This means that they can demonstrate new phenomena such as charge-density waves and can display nanoparticulate (0D), fibrous (1D) and lamellar (2D) morphologies. Low-Dimensional Solids presents some of the most recent research into the synthesis and properties of these solids and covers: Metal Oxide Nanoparticles; Inorganic Nanotubes and Nanowir

  7. Applications in solid mechanics

    Ølgaard, Kristian Breum; Wells, Garth N.


    Problems in solid mechanics constitute perhaps the largest field of application of finite element methods. The vast majority of solid mechanics problems involve the standard momentum balance equation, posed in a Lagrangian setting, with different models distinguished by the choice of nonlinear...... or linearized kinematics, and the constitutive model for determining the stress. For some common models, the constitutive relationships are rather complex. This chapter addresses a number of canonical solid mechanics models in the context of automated modeling, and focuses on some pertinent issues that arise...

  8. Solid propellant motor

    Shafer, J. I.; Marsh, H. E., Jr. (Inventor)


    A case bonded end burning solid propellant rocket motor is described. A propellant with sufficiently low modulus to avoid chamber buckling on cooling from cure and sufficiently high elongation to sustain the stresses induced without cracking is used. The propellant is zone cured within the motor case at high pressures equal to or approaching the pressure at which the motor will operate during combustion. A solid propellant motor with a burning time long enough that its spacecraft would be limited to a maximum acceleration of less than 1 g is provided by one version of the case bonded end burning solid propellant motor of the invention.

  9. The solid state maser

    Orton, J W; Walling, J C; Ter Haar, D


    The Solid State Maser presents readings related to solid state maser amplifier from the first tentative theoretical proposals that appeared in the early 1950s to the successful realization of practical devices and their application to satellite communications and radio astronomy almost exactly 10 years later. The book discusses a historical account of the early developments (including that of the ammonia maser) of solid state maser; the properties of paramagnetic ions in crystals; the development of practical low noise amplifiers; and the characteristics of maser devices designed for communica

  10. Laser cooling of solids

    Nemova, Galina


    Parallel to advances in laser cooling of atoms and ions in dilute gas phase, which has progressed immensely, resulting in physics Nobel prizes in 1997 and 2001, major progress has recently been made in laser cooling of solids. I compare the physical nature of the laser cooling of atoms and ions with that of the laser cooling of solids. I point out all advantages of this new and very promising area of laser physics. Laser cooling of solids (optical refrigeration) at the present time can be lar...

  11. Yucca Mountain Climate Technical Support Representative

    Sharpe, Saxon E


    The primary objective of Project Activity ORD-FY04-012, “Yucca Mountain Climate Technical Support Representative,” was to provide the Office of Civilian Radioactive Waste Management (OCRWM) with expertise on past, present, and future climate scenarios and to support the technical elements of the Yucca Mountain Project (YMP) climate program. The Climate Technical Support Representative was to explain, defend, and interpret the YMP climate program to the various audiences during Site Recommendation and License Application. This technical support representative was to support DOE management in the preparation and review of documents, and to participate in comment response for the Final Environmental Impact Statement, the Site Recommendation Hearings, the NRC Sufficiency Comments, and other forums as designated by DOE management. Because the activity was terminated 12 months early and experience a 27% reduction in budget, it was not possible to complete all components of the tasks as originally envisioned. Activities not completed include the qualification of climate datasets and the production of a qualified technical report. The following final report is an unqualified summary of the activities that were completed given the reduced time and funding.

  12. Latency represents sound frequency in mouse IC


    Frequency is one of the fundamental parameters of sound.The frequency of an acoustic stimulus can be represented by a neural response such as spike rate,and/or first spike latency(FSL)of a given neuron.The spike rates/frequency function of most neurons changes with different acoustic ampli-tudes,whereas FSL/frequency function is highly stable.This implies that FSL might represent the fre-quency of a sound stimulus more efficiently than spike rate.This study involved representations of acoustic frequency by spike rate and FSL of central inferior colliculus(IC)neurons responding to free-field pure-tone stimuli.We found that the FSLs of neurons responding to characteristic frequency(CF)of sound stimulus were usually the shortest,regardless of sound intensity,and that spike rates of most neurons showed a variety of function according to sound frequency,especially at high intensities.These results strongly suggest that FSL of auditory IC neurons can represent sound frequency more precisely than spike rate.

  13. Latency represents sound frequency in mouse IC

    QIU Qiang; TANG Jie; YU ZuLin; ZHANG Juan; ZHOU YingJie; XIAO ZhongJu; SHEN JunXian


    Frequency is one of the fundamental parameters of sound. The frequency of an acoustic stimulus can be represented by a neural response such as spike rate, and/or first spike latency (FSL) of a given neuron. The spike rates/frequency function of most neurons changes with different acoustic amplitudes, whereas FSL/frequency function is highly stable. This implies that FSL might represent the frequency of a sound stimulus more efficiently than spike rate. This study involved representations of acoustic frequency by spike rate and FSL of central inferior colliculus (IC) neurons responding to free-field pure-tone stimuli. We found that the FSLs of neurons responding to characteristic frequency (CF) of sound stimulus were usually the shortest, regardless of sound intensity, and that spike rates of most neurons showed a variety of function according to sound frequency, especially at high intensities.These results strongly suggest that FSL of auditory IC neurons can represent sound frequency more precisely than spike rate.

  14. Diversity and representativeness: two key factors

    Staff Association


    In the past few weeks many of you have filled out the questionnaire for preparing the upcoming Five-yearly review. Similarly, Staff Association members have elected their delegates to the Staff Council for the coming two years. Once again we would like to thank all those who have taken the time and effort to make their voice heard on these two occasions. Elections to the Staff Council Below we publish the new Staff Council with its forty delegates who will represent in 2014 and 2015 all CERN staff in the discussions with Management and Member States in the various bodies and committees. Therefore it is important that the Staff Council represents as far as possible the diversity of the CERN population. By construction, the election process with its electoral colleges and two-step voting procedure guarantees that all Departments, even the small ones, and the various staff categories are correctly represented. Figure 1 shows the participation rate in the elections. The average rate is just above 52 %, with ...

  15. Solid State Lighting Program (Falcon)

    Meeks, Steven


    Over the past two years, KLA-Tencor and partners successfully developed and deployed software and hardware tools that increase product yield for High Brightness LED (HBLED) manufacturing and reduce product development and factory ramp times. This report summarizes our development effort and details of how the results of the Solid State Light Program (Falcon) have started to help HBLED manufacturers optimize process control by enabling them to flag and correct identified killer defect conditions at any point of origin in the process manufacturing flow. This constitutes a quantum leap in yield management over current practice. Current practice consists of die dispositioning which is just rejection of bad die at end of process based upon probe tests, loosely assisted by optical in-line monitoring for gross process deficiencies. For the first time, and as a result of our Solid State Lighting Program, our LED manufacturing partners have obtained the software and hardware tools that optimize individual process steps to control killer defects at the point in the processes where they originate. Products developed during our two year program enable optimized inspection strategies for many product lines to minimize cost and maximize yield. The Solid State Lighting Program was structured in three phases: i) the development of advanced imaging modes that achieve clear separation between LED defect types, improves signal to noise and scan rates, and minimizes nuisance defects for both front end and back end inspection tools, ii) the creation of defect source analysis (DSA) software that connect the defect maps from back-end and front-end HBLED manufacturing tools to permit the automatic overlay and traceability of defects between tools and process steps, suppress nuisance defects, and identify the origin of killer defects with process step and conditions, and iii) working with partners (Philips Lumileds) on product wafers, obtain a detailed statistical correlation of automated

  16. Solid Waste Treatment Technology

    Hershaft, Alex


    Advances in research and commercial solid waste handling are offering many more processing choices. This survey discusses techniques of storage and removal, fragmentation and sorting, bulk reduction, conversion, reclamation, mining and mineral processing, and disposal. (BL)

  17. Solid Earth: Introduction

    Rummel, R.


    The principles of the solid Earth program are introduced. When considering the study of solid Earth from space, satellites are used as beacons, inertial references, free fall probes and carrying platforms. The phenomenon measured by these satellites and the processes which can be studied as a result of these measurements are tabulated. The NASA solid Earth program focusses on research into surface kinematics, Earth rotation, land, ice, and ocean monitoring. The ESA solid Earth program identifies as its priority the Aristoteles mission for determining the gravity and magnetic field globally, with high spatial resolution and high accuracy. The Aristoteles mission characteristics and goals are listed. The benefits of the improved gravity information that will be provided by this mission are highlighted. This information will help in the following research: geodesy, orbit mechanics, geodynamics, oceanography, climate sea level, and the atmosphere.

  18. Solid Waste Management Districts

    Vermont Center for Geographic Information — The Solid waste management districts layer is part of a dataset that contains administrative boundaries for Vermont's Agency of Natural Resources. This dataset...

  19. Gases, liquids and solids

    Tabor, David


    It has been tradional to treat gases, liquids and solids as if they were completely unrelated material. However, this book shows that many of their bulk properties can been explained in terms of intermolecular forces.


    L. N. Yakub


    Full Text Available The theoretical equation of state for solid methane, developed within the framework of perturbation theory, with the crystal consisting of spherical molecules as zero-order approximation, and octupole – octupole interaction of methane molecules as a perturbation, is proposed. Thermodynamic functions are computed on the sublimation line up to the triple point. The contribution of the octupole – octupole interaction to the thermodynamic properties of solid methane is estimated.

  1. Grid-Based Line Drawing Quantization.


    represents terrain contours, geographical maps, or other natural-object boundaries (Ref 12:1). Using the current techniques of two-dimensional sampling, in...terms of computer data a geographical map will typically contain 10-40 megabytes 4° I-I P° .L7 . of data (Ref 18:619). The data generated by the two...paintings, photographs, and printed text. A line structure is a geometrically defined concept, consisting of an assembly of points, line segements , and

  2. Solid model design simplification

    Ames, A.L.; Rivera, J.J.; Webb, A.J.; Hensinger, D.M.


    This paper documents an investigation of approaches to improving the quality of Pro/Engineer-created solid model data for use by downstream applications. The investigation identified a number of sources of problems caused by deficiencies in Pro/Engineer`s geometric engine, and developed prototype software capable of detecting many of these problems and guiding users towards simplified, useable models. The prototype software was tested using Sandia production solid models, and provided significant leverage in attacking the simplification problem.

  3. Organic Molecular Solids

    Schwoerer, Marcus


    This is the first comprehensive textbook on the physical aspects of organic solids. All phenomena which are necessary in order to understand modern technical applications are being dealt with in a way which makes the concepts of the topics accessible for students. The chapters - from the basics, production and characterization of organic solids and layers to organic semiconductors, superconductors and opto-electronical applications - have been arranged in a logical and well thought-out order.

  4. Solid phase sequencing of biopolymers

    Cantor, Charles R.; Hubert, Koster


    This invention relates to methods for detecting and sequencing target nucleic acid sequences, to mass modified nucleic acid probes and arrays of probes useful in these methods, and to kits and systems which contain these probes. Useful methods involve hybridizing the nucleic acids or nucleic acids which represent complementary or homologous sequences of the target to an array of nucleic acid probes. These probes comprise a single-stranded portion, an optional double-stranded portion and a variable sequence within the single-stranded portion. The molecular weights of the hybridized nucleic acids of the set can be determined by mass spectroscopy, and the sequence of the target determined from the molecular weights of the fragments. Probes may be affixed to a solid support such as a hybridization chip to facilitate automated molecular weight analysis and identification of the target sequence.

  5. Solid phase sequencing of biopolymers

    Cantor, Charles (Del Mar, CA); Koster, Hubert (La Jolla, CA)


    This invention relates to methods for detecting and sequencing target nucleic acid sequences, to mass modified nucleic acid probes and arrays of probes useful in these methods, and to kits and systems which contain these probes. Useful methods involve hybridizing the nucleic acids or nucleic acids which represent complementary or homologous sequences of the target to an array of nucleic acid probes. These probes comprise a single-stranded portion, an optional double-stranded portion and a variable sequence within the single-stranded portion. The molecular weights of the hybridized nucleic acids of the set can be determined by mass spectroscopy, and the sequence of the target determined from the molecular weights of the fragments. Nucleic acids whose sequences can be determined include DNA or RNA in biological samples such as patient biopsies and environmental samples. Probes may be fixed to a solid support such as a hybridization chip to facilitate automated molecular weight analysis and identification of the target sequence.

  6. Organic chemistry on solid surfaces

    Ma, Zhen; Zaera, Francisco [Department of Chemistry, University of California, Riverside, CA 92521 (United States)


    Chemistry on solid surfaces is central to many areas of practical interest such as heterogeneous catalysis, tribology, electrochemistry, and materials processing. With the development of many surface-sensitive analytical techniques in the past decades, great advances have been possible in our understanding of such surface chemistry at the molecular level. Earlier studies with model systems, single crystals in particular, have provided rich information about the adsorption and reaction kinetics of simple inorganic molecules. More recently, the same approach has been expanded to the study of the surface chemistry of relatively complex organic molecules, in large measure in connection with the selective synthesis of fine chemicals and pharmaceuticals. In this report, the chemical reactions of organic molecules and fragments on solid surfaces, mainly on single crystals of metals but also on crystals of metal oxides, carbides, nitrides, phosphides, sulfides and semiconductors as well as on more complex models such as bimetallics, alloys, and supported particles, are reviewed. A scheme borrowed from the organometallic and organic chemistry literature is followed in which key examples of representative reactions are cited first, and general reactivity trends in terms of both the reactants and the nature of the surface are then identified to highlight important mechanistic details. An attempt has been made to emphasize recent advances, but key earlier examples are cited as needed. Finally, correlations between surface and organometallic and organic chemistry, the relevance of surface reactions to applied catalysis and materials functionalization, and some promising future directions in this area are briefly discussed. (author)

  7. Lyophilization -Solid Waste Treatment

    Litwiller, Eric; Flynn, Michael; Fisher, John; Reinhard, Martin


    This paper discusses the development of a solid waste treatment system that has been designed for a Mars transit exploration mission. The technology described is an energy-efficient lyophilization technique that is designed to recover water from spacecraft solid wastes. Candidate wastes include feces, concentrated brines from water processors, and other solid wastes that contain free water. The system is designed to operate as a stand-alone process or to be integrated into the International Space Station Waste Collection System. In the lyophilization process, water in an aqueous waste is frozen and then sublimed, separating the waste into a dried solid material and liquid water. The sublimed water is then condensed in a solid ice phase and then melted to generate a liquid product. In the subject system the waste solids are contained within a 0.2 micron bio-guard bag and after drying are removed from the system and stored in a secondary container. This technology is ideally suited to applications such as the Mars Reference Mission, where water recovery rates approaching 100% are desirable but production of CO2 is not. The system is designed to minimize power consumption through the use of thermoelectric heat pumps. The results of preliminary testing of a prototype system and testing of the final configuration are provided. A mathematical model of the system is also described.

  8. Solid Mathematical Marbling.

    Lu, Shufang; Jin, Xiaogang; Jaffer, Aubrey; Gao, Fei; Mao, Xiaoyang


    Years of research have been devoted to computer-generated two-dimensional marbling. However, three-dimensional marbling has yet to be explored. In this paper, we present mathematical marbling of three-dimensional solids which supports a compact random-access vector representation. Our solid marbling textures are created by composing closed-form 3D pattern tool functions. These tool functions are an injection function and five deformation functions. The injection function is used to generate basic patterns, and the deformation functions are responsible for transforming the basic pattern into complex marbling effects. The resulting representation is feature preserving and resolution-independent. Our approach can render high-quality images preserving both the sharp features and the smooth color variations of a solid texture. When implemented on the GPU, our representation enables efficient color evaluation during the real-time solid marbling texture mapping. The color of a point in the volume space is computed by the 3D pattern tool functions from its coordinates. Our method consumes very little memory because only the mathematical functions and their corresponding parameters are stored. In addition, we develop an intuitive user interface and a genetic algorithm to facilitate the solid marbling texture authoring process. We demonstrate the effectiveness of our approach through various solid marbling textures and 3D objects carved from them.

  9. 40 CFR 72.26 - Delegation by designated representative and alternate designated representative.


    ... designated representative may delegate, to one or more natural persons, his or her authority to make an... representative may delegate, to one or more natural persons, his or her authority to make an electronic... this part and parts 73 through 77 of this chapter. (c) In order to delegate authority to make an...

  10. Covalent and Ionic Molecules: Why Are BeF2 and AlF3 High Melting Point Solids whereas BF3 and SiF4 Are Gases?

    Gillespie, Ronald J.


    Calculated ionic charges show that BF3 and SiF4 are predominately ionic molecules yet in contrast to BeF2 and AlF3 they exist as gases at room temperature and form molecular solids rather than infinite three-dimensional "ionic" solids at low temperature. Whether or not ionic molecules form a three-dimensional infinite ionic lattice or a molecular solid depends more on relative atomic (ionic) sizes than on the nature of the bonding in the isolated molecule. The ionic model for BF3 and BF4- provides a simple explanation of their bond lengths and for the constancy of interligand nonbonding distances. BF3 and SiF4 should be represented by ionic structures rather than by the conventional structures with bond lines that are normally assumed to indicate covalent bonds. A letter from Lawrence J. Sacks in our April 2000 issue addresses the above.

  11. Curcumin-loaded solid lipid nanoparticles induces human cervical carcinoma cell line Caski cells growth inhibition by suppressing phosphatidylinositol 3 kinase/protein kinase B signaling%固体脂质纳米姜黄素通过PI3K/AKT通路对宫颈癌Caski细胞增殖的影响

    丁书军; 黄宁; 黄丽霞


    Objective To investigate the effect of Curcumin-loaded solid lipid nanoparticles (Cur-SLN) on apoptosis and growth of human cervical carcinoma cell line Caski cells. Methods Preparing Cur-SLN by Solution diffusion method. Caski cells in logarithmic growth phase were treated with different concentrations of Cur-SLN (0、10、20、40、60umol/L) for 24h. MTT and flow cytometric analysis were used to evaluate the proliferation and apoptosis of Caski cells. The expression of phosphatidylinositol 3 ki-nase (PI3K),p-protein kinase B(p-AKT) and AKT in Caski cells was detected by Western blot. Results Cur-SLN treatment sig-nificantly increased cell apoptosis and decreased the cell proliferation and the expression of PI3K and p-AKT in Caski cells. However,Cur-SLN treatment had no significant influence on the expression of AKT. Conclusion Cur-SLN induces cell apoptosis and growth inhibition in the human cervical carcinoma cell line Caski cells possibly by suppressing PI3K/AKT signaling pathway.%目的:探讨固体脂质纳米姜黄素对宫颈癌Caski细胞增殖的影响。方法采用溶液扩散法制备Cur-SLN,设置Cur-SLN药物组(药物浓度分别为10、20、40、60μmol/L)、阴性对照组(不加Cur-SLN,仅含正常的Caski细胞)及空白对照组(不含细胞仅加培养液)。分别用MTT法测定细胞生长抑制率,流式细胞术检测细胞凋亡,Western-blot检测各组细胞PI3K、AKT和p-AKT蛋白表达。结果随着Cur-SLN浓度的增加,Caski细胞的抑制率与细胞凋亡明显上升,Caski细胞PI3K、p-AKT蛋白则呈现Cur-SLN浓度依赖性下调表达,AKT蛋白表达无明显变化。10、20、40、60umol/L Cur-SLN处理组、阴性对照组,组间差异均有统计学意义,P<0.05。结论 Cur-SLN抑制PI3K/AKT信号通路激活,诱发细胞凋亡,进而导致Caski细胞增殖抑制,为宫颈癌的临床治疗提供了新的理论依据。

  12. Targeting Nucleophosmin 1 Represents a Rational Strategy for Radiation Sensitization

    Sekhar, Konjeti R. [Department of Radiation Oncology, Vanderbilt University School of Medicine, Nashville, Tennessee (United States); Benamar, Mouadh [Department of Radiation Oncology, University of Virginia School of Medicine, Charlottesville, Virginia (United States); Venkateswaran, Amudhan; Sasi, Soumya [Department of Radiation Oncology, Vanderbilt University School of Medicine, Nashville, Tennessee (United States); Penthala, Narsimha R.; Crooks, Peter A. [Department of Pharmaceutical Sciences, College of Pharmacy, University of Arkansas for Medical Sciences, Little Rock, Arkansas (United States); Hann, Stephen R. [Department of Cell and Developmental Biology, Vanderbilt University School of Medicine, Nashville, Tennessee (United States); Geng, Ling [Department of Radiation Oncology, Vanderbilt University School of Medicine, Nashville, Tennessee (United States); Balusu, Ramesh [Department of Internal Medicine, University of Kansas Medical Center, Kansas City, Kansas (United States); Abbas, Tarek [Department of Radiation Oncology, University of Virginia School of Medicine, Charlottesville, Virginia (United States); Freeman, Michael L., E-mail: [Department of Radiation Oncology, Vanderbilt University School of Medicine, Nashville, Tennessee (United States)


    Purpose: To test the hypothesis that small molecule targeting of nucleophosmin 1 (NPM1) represents a rational approach for radiosensitization. Methods and Materials: Wilde-type and NPM1-deficient mouse embryo fibroblasts (MEFs) were used to determine whether radiosensitization produced by the small molecule YTR107 was NPM1 dependent. The stress response to ionizing radiation was assessed by quantifying pNPM1, γH2AX, and Rad51 foci, neutral comet tail moment, and colony formation. NPM1 levels in a human-derived non-small-cell lung cancer (NSCLC) tissue microarray (TMA) were determined by immunohistochemistry. YTR107-mediated radiosensitization was assessed in NSCLC cell lines and xenografts. Results: Use of NPM1-null MEFs demonstrated that NPM1 is critical for DNA double- strand break (DSB) repair, that loss of NPM1 increases radiation sensitivity, and that YTR107-mediated radiosensitization is NPM1 dependent. YTR107 was shown to inhibit NPM1 oligomerization and impair formation of pNPM1 irradiation-induced foci that colocalized with γH2AX foci. Analysis of the TMA demonstrated that NPM1 is overexpressed in subsets of NSCLC. YTR107 inhibited DNA DSB repair and radiosensitized NSCLC lines and xenografts. Conclusions: These data demonstrate that YTR107-mediated targeting of NPM1 impairs DNA DSB repair, an event that increases radiation sensitivity.

  13. Feasibility of the direct coupling of solid-phase extraction-pipette tips with a programmed-temperature vaporiser for gas chromatographic analysis of drugs in plasma

    van Hout, M.W J; van Egmond, W.M A; Franke, J.P.; de Zeeuw, R.A; de Jong, G.J.


    Solid-phase extraction-pipette tips (SPE-PTs) were used for micro solid-phase extraction of lidocaine and diazepam from plasma. Off-line extraction was followed by on-line desorption. On-line desorption was carried out by direct coupling of the SPE-PTs with the liner of the programmed-temperature va

  14. Solid Mesh Registration for Radiotherapy Treatment Planning

    Noe, Karsten Østergaard; Sørensen, Thomas Sangild


    We present an algorithm for solid organ registration of pre-segmented data represented as tetrahedral meshes. Registration of the organ surface is driven by force terms based on a distance field representation of the source and reference shapes. Registration of internal morphology is achieved usi...... to complete. The proposed method has many potential uses in image guided radiotherapy (IGRT) which relies on registration to account for organ deformation between treatment sessions....

  15. Flood Insurance Rate Maps and Base Flood Elevations, FIRM, DFIRM, BFE - FLOODPLAINS_CROSSSECTION_DFIRM_IDNR_IN: DFIRM Floodplain Cross section Lines for 86 of 92 Counties in Indiana (Indiana Department of Natural Resources, 1:12,000, Line Shapefile)

    NSGIC GIS Inventory (aka Ramona) — This line layer represents cross sections (XS) created from FEMA Flood Rate Insurance Maps (FIRM). These lines represent the locations of channel surveys performed...

  16. VT Electric Transmission Line Corridors - corridor lines

    Vermont Center for Geographic Information — (Link to Metadata) The ELTRN layer depicts electric transmission line corridors in Vermont. Various methods have been used to digitize features. The data layer...

  17. Line graphs as social networks

    Krawczyk, M. J.; Muchnik, L.; Mańka-Krasoń, A.; Kułakowski, K.


    It was demonstrated recently that the line graphs are clustered and assortative. These topological features are known to characterize some social networks [M.E.J. Newman, Y. Park, Why social networks are different from other types of networks, Phys. Rev. E 68 (2003) 036122]; it was argued that this similarity reveals their cliquey character. In the model proposed here, a social network is the line graph of an initial network of families, communities, interest groups, school classes and small companies. These groups play the role of nodes, and individuals are represented by links between these nodes. The picture is supported by the data on the LiveJournal network of about 8×10 6 people.

  18. Line graphs as social networks

    Krawczyk, Malgorzata; Mańka-Krasoń, Anna; Kułakowski, Krzysztof


    The line graphs are clustered and assortative. They share these topological features with some social networks. We argue that this similarity reveals the cliquey character of the social networks. In the model proposed here, a social network is the line graph of an initial network of families, communities, interest groups, school classes and small companies. These groups play the role of nodes, and individuals are represented by links between these nodes. The picture is supported by the data on the LiveJournal network of about 8 x 10^6 people. In particular, sharp maxima of the observed data of the degree dependence of the clustering coefficient C(k) are associated with cliques in the social network.

  19. Peripheral intravenous line (image)

    A peripheral intravenous line is a small, short plastic catheter that is placed through the skin into a vein, ... or foot, but occasionally in the head. A peripheral intravenous line is used to give fluids and ...

  20. Peripheral arterial line (image)

    A peripheral arterial line is a small, short plastic catheter placed through the skin into an artery of the arm or leg. The purpose of a peripheral arterial line is to allow continuous monitoring of ...

  1. Representing Operational Modes for Situation Awareness

    Kirchhübel, Denis; Lind, Morten; Ravn, Ole


    Operating complex plants is an increasingly demanding task for human operators. Diagnosis of and reaction to on-line events requires the interpretation of real time data. Vast amounts of sensor data as well as operational knowledge about the state and design of the plant are necessary to deduct reasonable reactions to abnormal situations. Intelligent computational support tools can make the operator’s task easier, but they require knowledge about the overall system in form of some model. While tools used for fault-tolerant control design based on physical principles and relations are valuable tools for designing robust systems, the models become too complex when considering the interactions on a plant-wide level. The alarm systems meant to support human operators in the diagnosis of the plant-wide situation on the other hand fail regularly in situations where these interactions of systems lead to many related alarms overloading the operator with alarm floods. Functional modelling can provide a middle way to reduce the complexity of plant-wide models by abstracting from physical details to more general functions and behaviours. Based on functional models the propagation of failures through the interconnected systems can be inferred and alarm floods can potentially be reduced to their root-cause. However, the desired behaviour of a complex system changes due to operating procedures that require more than one physical and functional configuration. In this paper a consistent representation of possible configurations is deduced from the analysis of an exemplary start-up procedure by functional models. The proposed interpretation of the modelling concepts simplifies the functional modelling of distinct modes. The analysis further reveals relevant links between the quantitative sensor data and the qualitative perspective of the diagnostics tool based on functional models. This will form the basis for the ongoing development of a novel real-time diagnostics system based

  2. Natural convection through enclosed disconnected solid blocks

    Lao, Fernando Cesar De; Junqueira, Silvio L.M.; Franco, Admilson T. [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil)]. E-mails:;;; Lage, Jose L. [Southern Methodist University (SMU), Dallas, TX (United States)]. E-mail:


    In this study, the natural convection inside a fluid filled, enclosure containing several solid obstructions and being heated from the side is modeled and numerically simulated. The solid obstructions are equally spaced, conducting, and disconnected square blocks. The mathematical model is based on the balance equations of mass, momentum and energy, which are then solved numerically via the finite-volume method with the SIMPLEST algorithm and the HYBRID scheme. The effects of varying the solid-fluid thermal conductivity ratio (K), the fluid volume-fraction or porosity ({phi}), the number of solid blocks (N) and the heating strength (represented by the Rayleigh number, Ra) of the enclosure on the Nusselt number based on the surface-averaged heat transfer coefficient along the heated wall of the enclosure are studied. The results indicate a competing effect caused by the proximity of the solid blocks to the heated and cooled walls, vis-a-vis hindering the boundary layer growth, hence reducing the heat transfer effectiveness, and at the same time enhancing the heat transfer when the blocks' thermal conductivity is larger than that of the fluid. An analytical estimate of the minimum number of blocks beyond which the convection hindrance becomes predominant is presented and validated by the numerical results. (author)

  3. Recommendations for representative ballast water sampling

    Gollasch, Stephan; David, Matej


    Until now, the purpose of ballast water sampling studies was predominantly limited to general scientific interest to determine the variety of species arriving in ballast water in a recipient port. Knowing the variety of species arriving in ballast water also contributes to the assessment of relative species introduction vector importance. Further, some sampling campaigns addressed awareness raising or the determination of organism numbers per water volume to evaluate the species introduction risk by analysing the propagule pressure of species. A new aspect of ballast water sampling, which this contribution addresses, is compliance monitoring and enforcement of ballast water management standards as set by, e.g., the IMO Ballast Water Management Convention. To achieve this, sampling methods which result in representative ballast water samples are essential. We recommend such methods based on practical tests conducted on two commercial vessels also considering results from our previous studies. The results show that different sampling approaches influence the results regarding viable organism concentrations in ballast water samples. It was observed that the sampling duration (i.e., length of the sampling process), timing (i.e., in which point in time of the discharge the sample is taken), the number of samples and the sampled water quantity are the main factors influencing the concentrations of viable organisms in a ballast water sample. Based on our findings we provide recommendations for representative ballast water sampling.

  4. [Sensitivity of four representative angular cephalometric measures].

    Xü, T; Ahn, J; Baumrind, S


    Examined the sensitivity of four representative cephalometric angles to the detection of different vectors of craniofacial growth. Landmark coordinate data from a stratified random sample of 48 adolescent subjects were used to calculate conventional values for changes between the pretreatment and end-of-treatment lateral cephalograms. By modifying the end-of-treatment coordinate values appropriately, the angular changes could be recalculated reflecting three hypothetical situations: Case 1. What if there were no downward landmark displacement between timepoints? Case 2. What if there were no forward landmark displacement between timepoints? Case 3. What if there were no Nasion change? These questions were asked for four representative cephalometric angles: SNA, ANB, NAPg and UI-SN. For Case 1, the associations (r) between the baseline and the modified measure for the three angles were very highly significant (P < 0.001) with r2 values no lower than 0.94! For Case 2, however, the associations were much weaker and no r value reached significance. These angular measurements are less sensitive for measuring downward landmark displacement than they are for measuring forward landmark displacement.

  5. How Are Feedbacks Represented in Land Models?

    Yang Chen


    Full Text Available Land systems are characterised by many feedbacks that can result in complex system behaviour. We defined feedbacks as the two-way influences between the land use system and a related system (e.g., climate, soils and markets, both of which are encompassed by the land system. Land models that include feedbacks thus probably more accurately mimic how land systems respond to, e.g., policy or climate change. However, representing feedbacks in land models is a challenge. We reviewed articles incorporating feedbacks into land models and analysed each with predefined indicators. We found that (1 most modelled feedbacks couple land use systems with transport, soil and market systems, while only a few include feedbacks between land use and social systems or climate systems; (2 equation-based land use models that follow a top-down approach prevail; and (3 feedbacks’ effects on system behaviour remain relatively unexplored. We recommend that land system modellers (1 consider feedbacks between land use systems and social systems; (2 adopt (bottom-up approaches suited to incorporating spatial heterogeneity and better representing land use decision-making; and (3 pay more attention to nonlinear system behaviour and its implications for land system management and policy.

  6. Quasi Regular Polyhedra and Their Duals with Coxeter Symmetries Represented by Quaternions II

    Koca, Mehmet; Shidhani, Saleh Al-


    In this paper we construct the quasi regular polyhedra and their duals which are the generalizations of the Archimedean and Catalan solids respectively. This work is an extension of two previous papers of ours which were based on the Archimedean and Catalan solids obtained as the orbits of the Coxeter groups . When these groups act on an arbitrary vector in 3D Euclidean space they generate the orbits corresponding to the quasi regular polyhedra. Special choices of the vectors lead to the platonic and Archimedean solids. In general, the faces of the quasi regular polyhedra consist of the equilateral triangles, squares, regular pentagons as well as rectangles, isogonal hexagons, isogonal octagons, and isogonal decagons depending on the choice of the Coxeter groups of interest. We follow the quaternionic representation of the group elements of the Coxeter groups which necessarily leads to the quaternionic representation of the vertices. We note the fact that the molecule can best be represented by a truncated ic...

  7. Magnetic resonance imaging (MRI) of solid rocket components

    Wallner, A.S. [Missouri Western State College, St. Joseph, MO (United States); Nissan, R.A.; Merwin, L.H. [Naval Air Warfare Center, China Lake, CA (United States)] [and others


    The evaluation of solid rocket components has become an area of great interest. Studying these materials with MRI offers a great advantage to observe knit lines, regions of inhomogeneity, voids, defects, plasticizer rich/poor areas and solids distribution because of the nondestructive nature of the technique. Aspects of sample preparation, spectroscopic relaxation studies, and MRI as a method of studying these systems will be discussed. Initial images show the ability to image propellant, liner, and explosive materials with an in-plane resolution of 70 {mu}m/pixel. These initial images show that MRI can be developed as a viable nondestructive evaluation method of solid rocket components.

  8. Open Verlinde line operators

    Gaiotto, Davide


    We reformulate the action of Verlinde line operators on conformal blocks in a 3d TFT language and extend it to line operators labelled by open paths joining punctures on the Riemann surface. We discuss the possible applications of open Verlinde line operators to quantum Teichm\\"uller theory, supersymmetric gauge theory and quantum groups

  9. Lined canvas paintings

    Krarup Andersen, Cecil


    and tensile testing samples from the tacking edges as well as lined mock-up samples. The ability of the different lining techniques to support canvas paintings is evaluated in terms of their initial stretching and during fluctuations of relative humidity. Six different combinations of lining adhesives...

  10. 管内固相微萃取-气相色谱法在线联用技术用于水样中的痕量分析%On-Line Coupling of In-Tube Solid Phase Microextraction to Capillary Gas Chromatography for Trace Analysis of Aqueous Samples

    关亚风; 王涵文; 刘文民


    Since the development of solid phase microextraction ( SPME ) method, many modifications have been made to improve the availability and application of the technique The in-tube SPME (ITSPME) was emerged and employed in high performance liquid chromatography (HPLC)

  11. Dynamic Nuclear Polarization (DNP) solid-state NMR spectroscopy, a new approach to study humic material?

    Knicker, Heike; Lange, Sascha; van Rossum, Barth; Oschkinat, Hartmut


    Compared to solution NMR spectroscopy, solid-state NMR spectra suffer from broad resonance lines and low resolution. This could be overcome by the use of 2-dimenstional solid-state NMR pulse sequences. Until recently, this approach has been unfeasible as a routine tool in soil chemistry, mainly because of the low NMR sensitivity of the respective samples. A possibility to circumvent those sensitivity problems represents high-field Dynamic Nuclear Polarization (DNP) solid-state NMR spectroscopy (Barnes et al., 2008), allowing considerable signal enhancements (Akbey et al., 2010). This is achieved by a microwave-driven transfer of polarization from a paramagnetic center to nuclear spins. Application of DNP to MAS spectra of biological systems (frozen solutions) showed enhancements of the factor 40 to 50 (Hall et al., 1997). Enhancements of this magnitude, thus may enable the use of at least some of the 2D solid-state NMR techniques that are presently already applied for pure proteins but are difficult to apply to soil peptides in their complex matrix. After adjusting the required acquisition parameters to the system "soil organic matter", lower but still promising enhancement factors were achieved. Additional optimization was performed and allowed the acquisition of 2D 13C and 15N solid-state NMR spectra of humified 13C and 15N enriched plant residues. Within the present contribution, the first solid-state DNP NMR spectra of humic material are presented. Those data demonstrate the great potential of this approach which certainly opens new doors for a better understanding of biochemical processes in soils, sediments and water. Akbey, Ü., Franks, W.T., Linden, A., Lange, S., Griffin, R.G., van Rossum, B.-J., Oschkinat, H., 2010. Dynamic nuclear polarization of deuterated proteins. Angewandte Chemie International Edition 49, 7803-7806. Barnes, A.B., De Paëpe, G., van der Wel, P.C.A., Hu, K.N., Joo, C.G., Bajaj, V.S., Mak-Jurkauskas, M.L., Sirigiri, J.R., Herzfeld, J

  12. PyNeb: Analysis of emission lines

    Luridiana, V.; Morisset, C.; Shaw, R. A.


    PyNeb (previously PyNebular) is an update and expansion of the IRAF package NEBULAR; rewritten in Python, it is designed to be more user-friendly and powerful, increasing the speed, easiness of use, and graphic visualization of emission lines analysis. In PyNeb, the atom is represented as an n-level atom. For given density and temperature, PyNeb solves the equilibrium equations and determines the level populations. PyNeb can compute physical conditions from suitable diagnostic line ratios and level populations, critical densities and line emissivities, and can compute and display emissivity grids as a function of Te and Ne. It can also deredden line intensities, read and manage observational data, and plot and compare atomic data from different publications, and compute ionic abundances from line intensities and physical conditions and elemental abundances from ionic abundances and icfs.

  13. Targeted proteomics of solid cancers: from quantification of known biomarkers towards reading the digital proteome maps.

    Pernikářová, Vendula; Bouchal, Pavel


    The concept of personalized medicine includes novel protein biomarkers that are expected to improve the early detection, diagnosis and therapy monitoring of malignant diseases. Tissues, biofluids, cell lines and xenograft models are the common sources of biomarker candidates that require verification of clinical value in independent patient cohorts. Targeted proteomics - based on selected reaction monitoring, or data extraction from data-independent acquisition based digital maps - now represents a promising mass spectrometry alternative to immunochemical methods. To date, it has been successfully used in a high number of studies answering clinical questions on solid malignancies: breast, colorectal, prostate, ovarian, endometrial, pancreatic, hepatocellular, lung, bladder and others. It plays an important role in functional proteomic experiments that include studying the role of post-translational modifications in cancer progression. This review summarizes verified biomarker candidates successfully quantified by targeted proteomics in this field and directs the readers who plan to design their own hypothesis-driven experiments to appropriate sources of methods and knowledge.

  14. Quantifying Heuristic Bias: Anchoring, Availability, and Representativeness.

    Richie, Megan; Josephson, S Andrew


    Construct: Authors examined whether a new vignette-based instrument could isolate and quantify heuristic bias. Heuristics are cognitive shortcuts that may introduce bias and contribute to error. There is no standardized instrument available to quantify heuristic bias in clinical decision making, limiting future study of educational interventions designed to improve calibration of medical decisions. This study presents validity data to support a vignette-based instrument quantifying bias due to the anchoring, availability, and representativeness heuristics. Participants completed questionnaires requiring assignment of probabilities to potential outcomes of medical and nonmedical scenarios. The instrument randomly presented scenarios in one of two versions: Version A, encouraging heuristic bias, and Version B, worded neutrally. The primary outcome was the difference in probability judgments for Version A versus Version B scenario options. Of 167 participants recruited, 139 enrolled. Participants assigned significantly higher mean probability values to Version A scenario options (M = 9.56, SD = 3.75) than Version B (M = 8.98, SD = 3.76), t(1801) = 3.27, p = .001. This result remained significant analyzing medical scenarios alone (Version A, M = 9.41, SD = 3.92; Version B, M = 8.86, SD = 4.09), t(1204) = 2.36, p = .02. Analyzing medical scenarios by heuristic revealed a significant difference between Version A and B for availability (Version A, M = 6.52, SD = 3.32; Version B, M = 5.52, SD = 3.05), t(404) = 3.04, p = .003, and representativeness (Version A, M = 11.45, SD = 3.12; Version B, M = 10.67, SD = 3.71), t(396) = 2.28, p = .02, but not anchoring. Stratifying by training level, students maintained a significant difference between Version A and B medical scenarios (Version A, M = 9.83, SD = 3.75; Version B, M = 9.00, SD = 3.98), t(465) = 2.29, p = .02, but not residents or attendings. Stratifying by heuristic and training level, availability maintained

  15. Solid/liquid interfacial tension as a tool to study stability of lysozyme on adsorption to solid surfaces

    Krishnan, C. A.; Maheshwari, R.; Dhathathreyan, A.


    This work proposes the use of solid/liquid interfacial tension to study the stability of adsorbed lysozyme films on a solid surface using the contact angle of a liquid at the three phase contact line, in the presence of a denaturant, urea. Results suggest a direct correlation between this method with a standard technique like the fluorescence emission spectra and is measured with the same observable error as in the spectral methods. Further the technique provides a simple and direct handle to evaluate the homogeneity and degree of polarity of protein films on solid surfaces.

  16. Representing the vacuum polarization on de Sitter

    Leonard, Katie E.; Woodard, Richard P. [Department of Physics, University of Florida, Gainesville, Florida 32611 (United States); Prokopec, Tomislav [Institute of Theoretical Physics (ITP) and Spinoza Institute, Utrecht University, Postbus 80195, 3508 TD Utrecht (Netherlands)


    Previous studies of the vacuum polarization on de Sitter have demonstrated that there is a simple, noncovariant representation of it in which the physics is transparent. There is also a cumbersome, covariant representation in which the physics is obscure. Despite being unwieldy, the latter form has a powerful appeal for those who are concerned about de Sitter invariance. We show that nothing is lost by employing the simple, noncovariant representation because there is a closed form procedure for converting its structure functions to those of the covariant representation. We also present a vastly improved technique for reading off the noncovariant structure functions from the primitive diagrams. And we discuss the issue of representing the vacuum polarization for a general metric background.

  17. Towards a representative periphytic diatom sample


    Full Text Available The need to acquire a representative periphytic diatom sample for river water quality monitoring has been recognised in the development of existing diatom indices, important in the development and employment of diatom monitoring tools for the Water Framework Directive. In this study, a nested design with replication is employed to investigate the magnitude of variation in diatom biomass, composition and Trophic Diatom Index at varying scales within a small chalk river. The study shows that the use of artificial substrates may not result in diatom communities that are typical of the surrounding natural substrates. Periphytic diatom biomass and composition varies between artificial and natural substrates, riffles and glides and between two stretches of the river channel. The study also highlights the existence of high variation in diatom frustule frequency and biovolume at the individual replicate scale which may have implications for the use of diatoms in routine monitoring.


    Andreea Feraru


    Full Text Available This article entitled Statistical Models of Representing Intellectual Capital approaches and analyses the concept of intellectual capital, as well as the main models which can support enterprisers/managers in evaluating and quantifying the advantages of intellectual capital. Most authors examine intellectual capital from a static perspective and focus on the development of its various evaluation models. In this chapter we surveyed the classical static models: Sveiby, Edvisson, Balanced Scorecard, as well as the canonical model of intellectual capital. Among the group of static models for evaluating organisational intellectual capital the canonical model stands out. This model enables the structuring of organisational intellectual capital in: human capital, structural capital and relational capital. Although the model is widely spread, it is a static one and can thus create a series of errors in the process of evaluation, because all the three entities mentioned above are not independent from the viewpoint of their contents, as any logic of structuring complex entities requires.

  19. Limit-point buckling analyses using solid, shell and elements

    Killpack, Marc; Abed-Meraim, Farid [CNRS, Metz Cedex (France)


    In this paper, the recently-developed solid-shell element SHB8PS is used for the analysis of a representative set of popular limit-point buckling benchmark problems. For this purpose, the element has been implemented in Abaqus/Standard finite element software and the modified Riks method was employed as an efficient path-following strategy. For the benchmark problems tested, the new element shows better performance compared to solid elements and often performs as well as state-of-the-art shell elements. In contrast to shell elements, it allows for the accurate prescription of boundary conditions as applied to the actual edges of the structure.

  20. Solid-state NMR of polymers

    Mirau, P


    Nuclear magnetic resonance (NMR) spectroscopy has emerged as one of the most important methods for the solid-state characterisation of polymers. The popularity of NMR is due to the fact that many molecular level features can be measured from the NMR spectra, including the polymer chain conformation, the morphology and the dynamics. The spectral features and relaxation times are affected by local interactions, so they provide information about the structure of polymers on a length scale (2-200 A) that is difficult to measure by other methods. In favourable cases, the NMR experiments provide a molecular-level explanation for the transitions observed by differential scanning calorimetry (DSC) and other methods, and the NMR properties can often be related to the bulk properties. Solid-state NMR has long been of interest in polymer science, and the first solid-state NMR studies of polymers were reported approximately a year after the discovery of nuclear resonance in bulk matter. It was reported in this initial study that the proton line width for natural rubber at room temperature is more like that of a mobile liquid than of a solid, but that the resonance broadens near the glass transition temperature (T{sub g}). This was recognised as being related to a change in chain dynamics above and below the T{sub g}. NMR methods developed rapidly after these initial observations, first for polymers in solution and, more recently, for polymers in the solid-state. Solid-state NMR studies of polymers were developed more slowly than their solution-state counterparts because solid-state NMR requires more specialised equipment. Solid-state NMR is now such an important tool that most modern spectrometers are capable of performing these studies. The interest in the NMR of solid polymers is due in part to the fact that most polymers are used in the solid state, and in many cases the NMR properties can be directly related to the macroscopic properties. Polymers have restricted mobility

  1. The genealogy of convex solids

    Domokos, Gabor; Szabó, Timea


    The shape of homogeneous, smooth convex bodies as described by the Euclidean distance from the center of gravity represents a rather restricted class M_C of Morse-Smale functions on S^2. Here we show that even M_C exhibits the complexity known for general Morse-Smale functions on S^2 by exhausting all combinatorial possibilities: every 2-colored quadrangulation of the sphere is isomorphic to a suitably represented Morse-Smale complex associated with a function in M_C (and vice versa). We prove our claim by an inductive algorithm, starting from the path graph P_2 and generating convex bodies corresponding to quadrangulations with increasing number of vertices by performing each combinatorially possible vertex splitting by a convexity- preserving local manipulation of the surface. Since convex bodies carrying Morse-Smale complexes isomorphic to P_2 exist, this algorithm not only proves our claim but also defines a hierarchical order among convex solids and general- izes the known classification scheme in [35], ...

  2. Solid electrolytic fuel cell

    Sakai, Masayasu; Yamauchi, Yasuhiro; Kamisaka, Mitsuo; Notomi, Kei.


    Concerning a solid electrolytic fuel cell with a gas permeable substrate pipe, a fuel electrode installed on this substrate pipe and an air electrode which is laminated on this fuel electrode with the electrolyte in between, the existing fuel cell of this kind uses crystals of CaMnO3, etc. for the material of the air electrode, but its electric resistance is big and in order to avert this, it is necessary to make the film thickness of the air electrode big. However, in such a case, the entry of the air into its inside worsens and the cell performance cannot develop satisfactorily. In view of the above, in order to obtain a high performance solid electrolytic fuel cell which can improve electric conductivity without damaging diffusion rate of the air, this invention proposes with regard to the aforementioned solid electrolytic fuel cell to install a heat resistant and conductive member inside the above air electrode. 6 figs.

  3. Towards a rational design of solid drug nanoparticles with optimised pharmacological properties

    Martin, Phillip; Smith, Darren; Curley, Paul; McDonald, Tom; Giardiello, Marco; Liptrott, Neill; Rannard, Steve; Owen, Andrew


    Abstract Solid drug nanoparticles (SDNs) are a nanotechnology with favourable characteristics to enhance drug delivery and improve the treatment of several diseases, showing benefit for improved oral bioavailability and injectable long‐acting medicines. The physicochemical properties and composition of nanoformulations can influence the absorption, distribution, and elimination of nanoparticles; consequently, the development of nanoparticles for drug delivery should consider the potential role of nanoparticle characteristics in the definition of pharmacokinetics. The aim of this study was to investigate the pharmacological behaviour of efavirenz SDNs and the identification of optimal nanoparticle properties and composition. Seventy‐seven efavirenz SDNs were included in the analysis. Cellular accumulation was evaluated in HepG2 (hepatic) and Caco‐2 (intestinal), CEM (lymphocyte), THP1 (monocyte), and A‐THP1 (macrophage) cell lines. Apparent intestinal permeability (Papp) was measured using a monolayer of Caco‐2 cells. The Papp values were used to evaluate the potential benefit on pharmacokinetics using a physiologically based pharmacokinetic model. The generated SDNs had an enhanced intestinal permeability and accumulation in different cell lines compared to the traditional formulation of efavirenz. Nanoparticle size and excipient choice influenced efavirenz apparent permeability and cellular accumulation, and this appeared to be cell line dependent. These findings represent a valuable platform for the design of SDNs, giving an empirical background for the selection of optimal nanoparticle characteristics and composition. Understanding how nanoparticle components and physicochemical properties influence pharmacological patterns will enable the rational design of SDNs with desirable pharmacokinetics. PMID:27774308

  4. Solid phases of tenoxicam.

    Cantera, Rodrigo G; Leza, María G; Bachiller, Carmen M


    In this report we describe the preparation and characterization of four polymorphic forms of tenoxicam; they are, three 1:1 stoichiometric solvates with acetonitrile, dioxane, and N,N-dimethylformamide, and an amorphous phase obtained by recrystallization in various solvents. Polymorph IV and solvates with dioxane and N,N-dimethylformamide are reported for the first time in this paper. In addition, three solvates were crystallized in acetone, ethyl acetate, and isopropyl alcohol. These solid forms were characterized by X-ray powder diffraction, differential scanning calorimetry, infrared spectroscopy, thermogravimetry, optical microscopy, and elemental analysis. Solid-state properties, intrinsic dissolution rate, and dissolution kinetics from formulated tablets are also provided.

  5. Photochemistry on solid surfaces

    Matsuura, T


    The latest developments in photochemistry on solid surfaces, i.e. photochemistry in heterogeneous systems, including liquid crystallines, are brought together for the first time in a single volume. Distinguished photochemists from various fields have contributed to the book which covers a number of important applications: molecular photo-devices for super-memory, photochemical vapor deposition to produce thin-layered electronic semiconducting materials, sensitive optical media, the control of photochemical reactions pathways, etc. Photochemistry on solid surfaces is now a major field and this

  6. Optical properties of solids

    Wooten, Frederick


    Optical Properties of Solids covers the important concepts of intrinsic optical properties and photoelectric emission. The book starts by providing an introduction to the fundamental optical spectra of solids. The text then discusses Maxwell's equations and the dielectric function; absorption and dispersion; and the theory of free-electron metals. The quantum mechanical theory of direct and indirect transitions between bands; the applications of dispersion relations; and the derivation of an expression for the dielectric function in the self-consistent field approximation are also encompassed.

  7. Solid-state circuits

    Pridham, G J


    Solid-State Circuits provides an introduction to the theory and practice underlying solid-state circuits, laying particular emphasis on field effect transistors and integrated circuits. Topics range from construction and characteristics of semiconductor devices to rectification and power supplies, low-frequency amplifiers, sine- and square-wave oscillators, and high-frequency effects and circuits. Black-box equivalent circuits of bipolar transistors, physical equivalent circuits of bipolar transistors, and equivalent circuits of field effect transistors are also covered. This volume is divided

  8. Solid state theory

    Harrison, Walter A


    ""A well-written text . . . should find a wide readership, especially among graduate students."" - Dr. J. I. Pankove, RCA.The field of solid state theory, including crystallography, semi-conductor physics, and various applications in chemistry and electrical engineering, is highly relevant to many areas of modern science and industry. Professor Harrison's well-known text offers an excellent one-year graduate course in this active and important area of research. While presenting a broad overview of the fundamental concepts and methods of solid state physics, including the basic quantum theory o

  9. Hybrid elastic solids

    Lai, Yun


    Metamaterials can exhibit electromagnetic and elastic characteristics beyond those found in nature. In this work, we present a design of elastic metamaterial that exhibits multiple resonances in its building blocks. Band structure calculations show two negative dispersion bands, of which one supports only compressional waves and thereby blurs the distinction between a fluid and a solid over a finite frequency regime, whereas the other displays super anisotropy-in which compressional waves and shear waves can propagate only along different directions. Such unusual characteristics, well explained by the effective medium theory, have no comparable analogue in conventional solids and may lead to novel applications. © 2011 Macmillan Publishers Limited. All rights reserved.

  10. Proton tunneling in solids

    Kondo, J.


    The tunneling rate of the proton and its isotopes between interstitial sites in solids is studied theoretically. The phonons and/or the electrons in the solid have two effects on the tunneling phenomenon. First, they suppress the transfer integral between two neighbouring states. Second, they give rise to a finite lifetime of the proton state. Usually the second effect is large and the tunneling probability per unit time (tunneling rate) can be defined. In some cases, however, a coherent tunneling is expected and actually observed. (author)

  11. Local Solid Shape

    Jan Koenderink


    Full Text Available Local solid shape applies to the surface curvature of small surface patches—essentially regions of approximately constant curvatures—of volumetric objects that are smooth volumetric regions in Euclidean 3-space. This should be distinguished from local shape in pictorial space. The difference is categorical. Although local solid shape has naturally been explored in haptics, results in vision are not forthcoming. We describe a simple experiment in which observers judge shape quality and magnitude of cinematographic presentations. Without prior training, observers readily use continuous shape index and Casorati curvature scales with reasonable resolution.

  12. Solid State Research


    width at half-maximum measured at 4 K of GalnAsSb layers grown on GaSb substrates. Solid circles this work; open squares from [9]; open triangle from...Rowe N. R. Newbury A. Sanchez-Rubio C. A. Primmerman Bermuda Grass Smut Spores WhitET 0 12 3 4 5 6 Ratio (PMT1 / PMT2) Figure 1-4...measured at 4 K of GalnAsSb layers grown on GaSb sub- strates. Solid circles this work; open squares from [9]; open triangle from [10]. [9],[10

  13. Reactions at Solid Surfaces

    Ertl, Gerhard


    Expanding on the ideas first presented in Gerhard Ertl's acclaimed Baker Lectures at Cornell University, Reactions at Solid Surfaces comprises an authoritative, self-contained, book-length introduction to surface reactions for both professional chemists and students alike. Outlining our present understanding of the fundamental processes underlying reactions at solid surfaces, the book provides the reader with a complete view of how chemistry works at surfaces, and how to understand and probe the dynamics of surface reactions. Comparing traditional surface probes with more modern ones, and brin

  14. SolidWorks : opetuspaketti

    Myllymäki, Vesa


    Opinnäytetyössä tutkittiin mahdollisuuksia tehdä opetusvideoita SolidWorks -ohjelman käyttämisestä. Tähän tarkoitukseen löydettiin menetelmään sopiva ohjelma, CamStudio, jota sitten sovellettiin käytännössä. Camstudio ja SolidWorks ohjelmia hyödyntäen luotiin videoita kolmiulotteisista mallinnusprosesseista. Menetelmä toimi, mutta sen käyttökelpoisuuteen liittyi ongelmia. Videoden laatu on heikko, mutta sen parantaminen merkitsisi suurempaa tiedostokokoa, mikä voi tuottaa tietokantaongelmia. ...

  15. Recent activities of the Seismology Division Early Career Representative(s)

    Agius, Matthew; Van Noten, Koen; Ermert, Laura; Mai, P. Martin; Krawczyk, CharLotte


    The European Geosciences Union is a bottom-up-organisation, in which its members are represented by their respective scientific divisions, committees and council. In recent years, EGU has embarked on a mission to reach out for its numerous 'younger' members by giving awards to outstanding young scientists and the setting up of Early Career Scientists (ECS) representatives. The division representative's role is to engage in discussions that concern students and early career scientists. Several meetings between all the division representatives are held throughout the year to discuss ideas and Union-wide issues. One important impact ECS representatives have had on EGU is the increased number of short courses and workshops run by ECS during the annual General Assembly. Another important contribution of ECS representatives was redefining 'Young Scientist' to 'Early Career Scientist', which avoids discrimination due to age. Since 2014, the Seismology Division has its own ECS representative. In an effort to more effectively reach out for young seismologists, a blog and a social media page dedicated to seismology have been set up online. With this dedicated blog, we'd like to give more depth to the average browsing experience by enabling young researchers to explore various seismology topics in one place while making the field more exciting and accessible to the broader community. These pages are used to promote the latest research especially of young seismologists and to share interesting seismo-news. Over the months the pages proved to be popular, with hundreds of views every week and an increased number of followers. An online survey was conducted to learn more about the activities and needs of early career seismologists. We present the results from this survey, and the work that has been carried out over the last two years, including detail of what has been achieved so far, and what we would like the ECS representation for Seismology to achieve. Young seismologists are

  16. Stock flow diagram analysis on solid waste management in Malaysia

    Zulkipli, Faridah; Nopiah, Zulkifli Mohd; Basri, Noor Ezlin Ahmad; Kie, Cheng Jack


    The effectiveness on solid waste management is a major importance to societies. Numerous generation of solid waste from our daily activities has risked for our communities. These due to rapid population grow and advance in economic development. Moreover, the complexity of solid waste management is inherently involved large scale, diverse and element of uncertainties that must assist stakeholders with deviating objectives. In this paper, we proposed a system dynamics simulation by developing a stock flow diagram to illustrate the solid waste generation process and waste recycle process. The analysis highlights the impact on increasing the number of population toward the amount of solid waste generated and the amount of recycled waste. The results show an increment in the number of population as well as the amount of recycled waste will decrease the amount of waste generated. It is positively represent the achievement of government aim to minimize the amount of waste to be disposed by year 2020.

  17. The Two Sides of the Representative Coin

    Keith Sutherland


    Full Text Available In Federalist 10 James Madison drew a functional distinction between “parties” (advocates for factional interests and “judgment” (decision-making for the public good and warned of the corrupting effect of combining both functions in a “single body of men.” This paper argues that one way of overcoming “Madisonian corruption” would be by restricting political parties to an advocacy role, reserving the judgment function to an allotted (randomly-selected microcosm of the whole citizenry, who would determine the outcome of parliamentary debates by secret ballot—a division of labour suggested by James Fishkin’s experiments in deliberative polling. The paper then defends this radical constitutional proposal against Bernard Manin’s (1997 claim that an allotted microcosm could not possibly fulfil the “consent” requirement of Natural Right theory. Not only does the proposal challenge Manin’s thesis, but a 28th Amendment implementing it would finally reconcile the competing visions that have bedevilled representative democracy since the Constitutional Convention of 1787.

  18. The Two Sides of the Representative Coin

    Keith Sutherland


    Full Text Available In Federalist 10 James Madison drew a functional distinction between “parties” (advocates for factional interests and “judgment” (decision-making for the public good and warned of the corrupting effect of combining both functions in a “single body of men.” This paper argues that one way of overcoming “Madisonian corruption” would be by restricting political parties to an advocacy role, reserving the judgment function to an allotted (randomly-selected microcosm of the whole citizenry, who would determine the outcome of parliamentary debates by secret ballot—a division of labour suggested by James Fishkin’s experiments in deliberative polling. The paper then defends this radical constitutional proposal against Bernard Manin’s (1997 claim that an allotted microcosm could not possibly fulfil the “consent” requirement of Natural Right theory. Not only does the proposal challenge Manin’s thesis, but a 28th Amendment implementing it would finally reconcile the competing visions that have bedevilled representative democracy since the Constitutional Convention of 1787.

  19. Megabar pressure phases of solid hydrogen

    Chen, Nancy Hueling

    The behavior of solid Hsb2, Dsb2, and HD at low temperatures high pressures was investigated. The experimental data were obtained by combining high pressure diamond anvil cell apparatus with cryogenic and spectroscopic techniques. Megabar pressures (1 bar = 10sp5 Pa) and liquid helium temperatures were accessible. The observed phases and phase lines are discussed with respect to orientational order, crystal structure, and electronic properties. The orientational order-disorder phase transition in HD was studied by Raman spectroscopy. Due to the distinguishability of the nuclei in an HD molecule, the observed phase line exhibits surprising behavior relative to that expected for the homonuclear molecules Hsb2 and Dsb2. The megabar pressure phase diagram of solid Dsb2 was investigated by infrared and Raman spectroscopy. The broken symmetry phase (BSP) transition line and the D-A phase line were observed to meet at a triple point. The relative arrangement of phase lines in P-T space, combined with group theoretical analysis of observed infrared and Raman spectra within the phases, sets symmetry restrictions on the allowed crystal structures. The electronic properties of the high pressure H-A and D-A phases were examined, since these recently discovered phases were suspected of being metallic. Acquired broadband infrared absorption spectra extending to 10 mum were analyzed in terms of the Drude model for metals. No evidence indicating metallic behavior was found. Refinements in high pressure techniques were explored, in order to increase the maximum pressures attainable. A method of extending ruby fluorescence pressure measurements to multimegabar pressures was developed, which involved excitation of ruby fluorescence with red, rather than blue or green laser light.

  20. Antiphospholipid syndrome, antiphospholipid antibodies and solid organ transplantation.

    González-Moreno, J; Callejas-Rubio, J L; Ríos-Fernández, R; Ortego-Centeno, N


    Antiphospholipid syndrome is considered a high risk factor for any kind of surgery. Considering that all solid organ transplants are critically dependent on the patency of vascular anastomosis, there is much concern about the consequences this pro-thrombotic condition may have on transplantation. Relatively little information is available in the literature assessing the real risk that antiphospholipid syndrome or the presence of antiphospholipid antibodies represent in solid organ transplantation. The aim of this article is to review the literature related to transplantation of solid organs in patients diagnosed with antiphospholipid syndrome or patients with positive antiphospholipid antibodies.

  1. Fast Analysis of Vitamin A and E in Animal Derived Foods by On-Line Solid Phase Extraction Coupled with High Performance Liquid Chromatography%在线固相萃取-高效液相色谱联用测定动物源食品中的维生素A、E

    谢云峰; 王浩; 刘佟; 任丹丹; 杨永坛


    采用固相萃取与双梯度高效液相色谱联用技术,建立了一种在线固相萃取-高效液相色谱同时测定动物源食品中维生素A、E的分析方法。样品于80℃下皂化反应30 min,经离心沉淀后引入一维C8固相萃取柱,采用60%( V/V)甲醇溶液对目标物进行在线富集净化,然后通过阀切换将其转移至二维液相分析系统进行分离检测。考察了萃取填料、上样溶剂及洗脱条件对猪肝、鸡蛋和配方乳粉的维生素A、E富集和基质净化效果。结果表明,在优化条件下,方法线性范围为0.02~20 mg/L,线性相关系数R2≥0.9998,对维生素A、E的检出限(S/N=3)为3.0~30.0μg/L,实际样品加标回收率为87.3%~115.0%,相对标准偏差(RSD)为1.8%~4.6%。本方法操作简便,灵敏度高,可用于动物源食品中维生素A、E的快速测定。%An automated analytical method for simultaneous determination of vitamin A and E in livers, fortified infant formulae and eggs has been developed based on on-line solid phase extraction (SPE) coupled with a dual gradient high performance liquid chromatography system with column-switching. Firstly, food samples were centrifuged after saponified in mixture solution of anhydrous alcohol, potassium hydroxide and ascorbic acid at 80 ℃ for 30 min. Secondly, the saponified sample was loaded and washed on the first dimension extraction column using methanol-water (60∶40, V/V). Afterwards, the targeted analytes were trapped and enriched on the SPE column. Finally, the trapped analytes were transferred to the second dimension analysis column by valve-switching technique for the following separation and determination. Several key factors such as the type of SPE columns, elution buffer as well as pH of washing solution were optimized. The results showed that the calibration curves of vitamin A and E were linear in the range of 0 . 02-20 mg/L with correlation coefficient (R2) more than 0. 9998. In addition, the limits of detection

  2. Observations of Solids in Protoplanetary Disks

    Andrews, Sean M


    This review addresses the state of research that employs astronomical (remote sensing) observations of solids ("dust") in young circumstellar disks to learn about planet formation. The intention is for it to serve as an accessible, introductory, pedagogical resource for junior scientists interested in the subject. After some historical background and a basic observational primer, the focus is shifted to the three fundamental topics that broadly define the field: (1) demographics -- the relationships between disk properties and the characteristics of their environments and hosts; (2) structure -- the spatial distribution of disk material and its associated physical conditions and composition; and (3) evolution -- the signposts of key changes in disk properties, including the growth and migration of solids and the impact of dynamical interactions with young planetary systems. Based on the state of the art results in these areas, suggestions are made for potentially fruitful lines of work in the near future.

  3. High energy beam lines

    Marchetto, M.; Laxdal, R. E.


    The ISAC post accelerator comprises an RFQ, DTL and SC-linac. The high energy beam lines connect the linear accelerators as well as deliver the accelerated beams to two different experimental areas. The medium energy beam transport (MEBT) line connects the RFQ to the DTL. The high energy beam transport (HEBT) line connects the DTL to the ISAC-I experimental stations (DRAGON, TUDA-I, GPS). The DTL to superconducting beam (DSB) transport line connects the ISAC-I and ISAC-II linacs. The superconducting energy beam transport (SEBT) line connects the SC linac to the ISAC-II experimental station (TUDA-II, HERACLES, TIGRESS, EMMA and GPS). All these lines have the function of transporting and matching the beams to the downstream sections by manipulating the transverse and longitudinal phase space. They also contain diagnostic devices to measure the beam properties.

  4. Solid state physics

    Brewster, Hilary D


    Solid state physics is an exhaustive introductory text for the students of physics. Keeping in mind, this book has been prepared to present the subject-matter in an easily understandable way without sacrificing the essential details and principles an yet avoiding redundant matter and unnecessary complications. This book is expected to meet adequately the need of the students for whom it is meant.

  5. Solid Oxide Fuel Cell


    The solid oxide fuel cell comprising a metallic support material, an active anode layer consisting of a good hydrocarbon cracking catalyst, an electrolyte layer, an active cathode layer, and a transition layer consisting of preferably a mixture of LSM and a ferrite to the cathode current collector...

  6. Current Solid Mechanics Research

    Tvergaard, Viggo


    About thirty years ago James Lighthill wrote an essay on “What is Mechanics?” With that he also included some examples of the applications of mechanics. While his emphasis was on fluid mechanics, his own research area, he also included examples from research activities in solid mechanics....

  7. Solid-phase microextraction

    Nilsson, Torben

    The objective of this study has been to develop new analytical methods using the rapid, simple and solvent-free extraction technique solid-phase microextraction (SPME) for the quantitative analysis of organic pollutants at trace level in drinking water and environmental samples. The dynamics...

  8. Local solid shape

    Koenderink, Jan|info:eu-repo/dai/nl/070864543; van Doorn, A.J.; Wagemans, Johan


    Local solid shape applies to the surface curvature of small surface patches-essentially regions of approximately constant curvatures-of volumetric objects that are smooth volumetric regions in Euclidean 3-space. This should be distinguished from local shape in pictorial space. The difference is cate

  9. Solid-State Devices.

    Sutliff, Ronald D.; And Others

    This self-study course is designed to familiarize Marine Corps enlisted personnel with the principles of solid-state devices and their functions. The course contains four study units. Each study unit begins with a general objective, which is a statement of what the student should learn from the unit. The study units are divided into numbered work…

  10. Solid Oxide Fuel Cell


    The solid oxide fuel cell comprising a metallic support material, an active anode layer consisting of a good hydrocarbon cracking catalyst, an electrolyte layer, an active cathode layer, and a transition layer consisting of preferably a mixture of LSM and a ferrite to the cathode current collector...

  11. Solid-Waste Management

    Science Teacher, 1973


    Consists of excerpts from a forthcoming publication of the United States Environmental Protection Agency, Student's Guide to Solid-Waste Management.'' Discusses the sources of wastes from farms, mines, factories, and communities, the job of governments, ways to collect trash, methods of disposal, processing, and suggests possible student action.…

  12. Physical properties of solids

    Wilkinson, M. K.; Young, Jr, F. W.


    Research at ORNL into the physical properties of solids is described. Topics covered include: optical, electrical, and magnetic properties of magnesium oxide; ionic conductivity and superconductivity; surface physics and catalysis; defects and impurities in insulating crystals; photovoltaic conversion of solar energy; and fracture studies. (GHT)

  13. Series Transmission Line Transformer

    Buckles, Robert A.; Booth, Rex; Yen, Boris T.


    A series transmission line transformer is set forth which includes two or more of impedance matched sets of at least two transmissions lines such as shielded cables, connected in parallel at one end ans series at the other in a cascading fashion. The cables are wound about a magnetic core. The series transmission line transformer (STLT) which can provide for higher impedance ratios and bandwidths, which is scalable, and which is of simpler design and construction.

  14. Solid-liquid critical behavior of water in nanopores.

    Mochizuki, Kenji; Koga, Kenichiro


    Nanoconfined liquid water can transform into low-dimensional ices whose crystalline structures are dissimilar to any bulk ices and whose melting point may significantly rise with reducing the pore size, as revealed by computer simulation and confirmed by experiment. One of the intriguing, and as yet unresolved, questions concerns the observation that the liquid water may transform into a low-dimensional ice either via a first-order phase change or without any discontinuity in thermodynamic and dynamic properties, which suggests the existence of solid-liquid critical points in this class of nanoconfined systems. Here we explore the phase behavior of a model of water in carbon nanotubes in the temperature-pressure-diameter space by molecular dynamics simulation and provide unambiguous evidence to support solid-liquid critical phenomena of nanoconfined water. Solid-liquid first-order phase boundaries are determined by tracing spontaneous phase separation at various temperatures. All of the boundaries eventually cease to exist at the critical points and there appear loci of response function maxima, or the Widom lines, extending to the supercritical region. The finite-size scaling analysis of the density distribution supports the presence of both first-order and continuous phase changes between solid and liquid. At around the Widom line, there are microscopic domains of two phases, and continuous solid-liquid phase changes occur in such a way that the domains of one phase grow and those of the other evanesce as the thermodynamic state departs from the Widom line.

  15. Electron Spin Resonance of Tetrahedral Transition Metal Oxyanions (MO4n-) in Solids.

    Greenblatt, M.


    Outlines general principles in observing sharp electron spin resonance (ESR) lines in the solid state by incorporating the transition metal ion of interest into an isostructural diamagnetic host material in small concentration. Examples of some recent studies are described. (CS)

  16. Surface thermodynamics, surface stress, equations at surfaces and triple lines for deformable bodies.

    Olives, Juan


    The thermodynamics and mechanics of the surface of a deformable body are studied here, following and refining the general approach of Gibbs. It is first shown that the 'local' thermodynamic variables of the state of the surface are only the temperature, the chemical potentials and the surface strain tensor (true thermodynamic variables, for a viscoelastic solid or a viscous fluid). A new definition of the surface stress is given and the corresponding surface thermodynamics equations are presented. The mechanical equilibrium equation at the surface is then obtained. It involves the surface stress and is similar to the Cauchy equation for the volume. Its normal component is a generalization of the Laplace equation. At a (body-fluid-fluid) triple contact line, two equations are obtained, which represent: (i) the equilibrium of the forces (surface stresses) for a triple line fixed on the body; (ii) the equilibrium relative to the motion of the line with respect to the body. This last equation leads to a strong modification of Young's classical capillary equation.

  17. Red grape seed extract and its compound resveratrol exert cytotoxic effect to various human cancer lines.

    Şahin, Fahri; Avcı, Çığır Biray; Avcu, Ferit; Ural, Ali Uğur; Sarper, Meral; Hışıl, Yaşar; Omay, Serdar Bedii; Saydam, Güray


    Modern medicinal agents currently available for treatment of cancers are very expensive, toxic, and less effective in treating some of the disease. Thus, one must investigate further in detail the agents derived from natural sources, such as grape seed, for the prevention and treatment of cancer and disease. In recent years interest of researchers has focused on grape seed and nowadays scientists have used extracts of grape seed to treat different health problems including cancer. We examined the cytotoxic effect of red grape seed extract (GSE) and its main compound resveratrol (RES) on different human cancer cell lines representing various solid tumors and hematological malignancies at the same time. Red GSE was prepared by using 1, 1, 1, 2- Tetrafluoroethane extraction method. Cytotoxicity of the extract and RES was evaluated by using trypan blue dye exclusion method and MTT assay. The results of our study show that GSE and RES have cytotoxic activities in varying degree in several cancer cell lines. There has not been any study evaluating the GES and RES in the same cell lines and in the same conditions. But, it is still needed to have more pre-clinical and laboratory studies to validate the usefulness of these agents either alone or in combination with existing therapy.

  18. First laser ions at an off-line mass separator of the ISAC facility at TRIUMF

    Rauth, C; Horn, R; Lassen, J; Bricault, P; Wendt, K; 10.1016/j.nimb.2003.08.029


    For efficient and in particular for selective production of radioactive ion beams at on-line mass separator facilities the technique of resonance ionization laser ion sources (RILlS) has become the most powerful tool. In facilities like ISOLDE at CERN they nowadays represent the most commonly used type of ion source for rare short-lived isotopes, delivering highest suppression of isobaric contaminations. For a first off-line demonstration preparing the development and installation of such a laser ion source at the new ISAC facility at TRIUMF in Vancouver (Canada), an all solid state laser system developed at the University of Mainz (Germany), was transferred and tested there at an off-line test separator. The laser system consists of three tunable titanium:sapphire lasers with a repetition rate of 12 kHz, pulse length of ~30 ns, up to 2.5 W output power in the infrared to red spectral region and features additional frequency doubling units. With this system first RILIS studies were performed in a number of el...

  19. Do Female Representatives Adhere More Closely to Citizens’ Preferences Than Male Representatives?


    We analyze whether female or male members of parliament adhere more closely to citizens’ revealed preferences with quasi-experimental data. By matching individual representatives’ voting behavior on legislative proposals with real referenda outcomes on the same issues, we identify the effect of gender on representatives’ responsiveness to revealed preferences of the majority of voters. Overall, female members of parliament tend to adhere less to citizens’ preferences than male parliam...

  20. Solid solubility of germanium in silver

    Kazemi, Hamed [Laboratory of Mechanical Metallurgy, Ecole Polytechnique Federale de Lausanne, EPFL, CH-1015 Lausanne (Switzerland); Weber, Ludger, E-mail: [Laboratory of Mechanical Metallurgy, Ecole Polytechnique Federale de Lausanne, EPFL, CH-1015 Lausanne (Switzerland)


    Highlights: Black-Right-Pointing-Pointer The solvus line in the binary Ag-Ge system has been assessed based on measurements of electrical resistivity and specific gravity. Black-Right-Pointing-Pointer The two measurement techniques yield close agreement. Black-Right-Pointing-Pointer The data found in this contribution indicate lower solid solubility than in previous assessments. Black-Right-Pointing-Pointer Redlich-Kister parameters have been evaluated to describe the solvus line. - Abstract: The solid solubility of germanium in silver has been measured in the temperature range of 520 K to 913 K via measurements of density and of electrical conductivity of two near-eutectic Ag-Ge alloys. The atomic fraction of germanium in solid solution varied between 0.014 and 0.089 over the mentioned range of temperature and an extrapolated maximum solubility of 0.093 at the eutectic temperature of 924 K is found. For samples with spheroidized Ge-particles before the equilibrium heat treatments at low temperature for 24 or 48 h, thermodynamic equilibrium was supposedly not achieved at temperatures below 723 K. Much longer heat treatments (tens of days) on the significantly finer as-cast microstructure allowed to reach equilibrium probably down to 600 K. Independently of whether thermodynamic equilibrium was reached or not the electrical conductivity and the density measurements yielded good agreement typically within a few tenth of percent of atomic Ge-concentration in solid solution in {alpha}-Ag for a given temperature. The results are close to, yet consistently slightly lower than, the values given by Owen and Rowland on which the current assessment of the solvus in the Ag-Ge binary is based. More recent results by Filipponi and co-workers are clearly not in agreement with the data presented here.

  1. Covariant electromagnetic field lines

    Hadad, Y.; Cohen, E.; Kaminer, I.; Elitzur, A. C.


    Faraday introduced electric field lines as a powerful tool for understanding the electric force, and these field lines are still used today in classrooms and textbooks teaching the basics of electromagnetism within the electrostatic limit. However, despite attempts at generalizing this concept beyond the electrostatic limit, such a fully relativistic field line theory still appears to be missing. In this work, we propose such a theory and define covariant electromagnetic field lines that naturally extend electric field lines to relativistic systems and general electromagnetic fields. We derive a closed-form formula for the field lines curvature in the vicinity of a charge, and show that it is related to the world line of the charge. This demonstrates how the kinematics of a charge can be derived from the geometry of the electromagnetic field lines. Such a theory may also provide new tools in modeling and analyzing electromagnetic phenomena, and may entail new insights regarding long-standing problems such as radiation-reaction and self-force. In particular, the electromagnetic field lines curvature has the attractive property of being non-singular everywhere, thus eliminating all self-field singularities without using renormalization techniques.

  2. The Four Intersection-and-Difference Model for Line-Line Topological Relations

    DENG Min; LI Zhilin; LI Guangqiang; ZHANG Xuesong


    The description of line-line topological relations is still an unsolved issue although much effort has been done. The problem is involved in many practical applications such as spatial query, spatial analysis and cartographic generalization. To develop a sound and effective approach to describe line-line relations, it is first necessary to define the topology of an individual line, i.e., local topology. The concept of connective degree is used for the identification of topological differences in the geometric structure of a line. The general topological definition of a line is given, i.e., endpoints set and interior point set. This definition can be applied to the embedded spaces of different dimensions, whether co-dimension is equal to or larger than zero. On this basis, a generic model called the 4 intersection-and-difference is set up for the description of basic line-line topological relations, upon which a conceptual neighborhood graph is built with consideration of topological distance. It is concluded that the proposed model can represent the property of topological changes, and basic relations between line segments in IR1 and IR2.

  3. Luminescence and the solid state

    Ropp, Richard C


    Since the discovery of the transistor in 1948, the study of the solid state has been burgeoning. Recently, cold fusion and the ceramic superconductor have given cause for excitement. There are two approaches possible to this area of science, namely, that of solid state physics and solid state chemistry, although both overlap extensively. The former is more concerned with electronic states in solids (including electromagnetics) whereas the latter is more concerned with interactions of atoms in solids. The area of solid state physics is well documented, however, there are very few texts which de

  4. M-Solidity Testing Systems

    K. Denecke; S.L. Wismath


    A set S of hypersubstitutions is called an M-solidity testing system for a class of varieties if it is possible to determine all M-solid varieties in the class using only the hypersubstitutions from S. If S is a minimal such set, we will call it an M-solidity basis for the class. In this paper, we relate solidity testing systems to the Galois connection between hypersubstitutions and varieties, and present a number of examples of solidity testing systems for several different types of varieties, including examples of the existence of finite M-solidity bases for various classes.

  5. SolidWorks Administration Bible

    Lombard, Matt


    What you need to prepare, install, and maintain SolidWorks. It's not enough to know how to use SolidWorks, if your job also requires you to install or maintain it, train new users, and implement standards. This in-depth guide was written for those of you who have to actually manage your company's SolidWorks system. From hardware selection to helping users to licensing and more, this is the everyday, bread-and-butter SolidWorks administration resource that IT and CAD managers have been seeking.:; SolidWorks is a powerful 3D solid modeling system that is popular with CAD users everywhere, but of


    陶昉敏; 张明焕; 汤任基


    Using the engineering model of elastic line inclusion and the basic solutions of a single inclusion, the interaction problem between line inclusions in an elastic solid was investigated. A set of standard Cauchy-type singular equations of the problem was presented. The stress intensity factors at points of inclusions and the interface stresses of two sides of the inclusion were calculated. Several numerical examples were given. The results could be regarded as a reference to engineering.

  7. Representing Identity and Equivalence for Scientific Data

    Wickett, K. M.; Sacchi, S.; Dubin, D.; Renear, A. H.


    Matters of equivalence and identity are central to the stewardship of scientific data. In order to properly prepare for and manage the curation, preservation and sharing of digitally-encoded data, data stewards must be able to characterize and assess the relationships holding between data-carrying digital resources. However, identity-related questions about resources and their information content may not be straightforward to answer: for example, what exactly does it mean to say that two files contain the same data, but in different formats? Information content is frequently distinguished from particular representations, but there is no adequately developed shared understanding of what this really means and how the relationship between content and its representations hold. The Data Concepts group at the Center for Informatics Research in Science and Scholarship (CIRSS), University of Illinois at Urbana Champaign, is developing a logic-based framework of fundamental concepts related to scientific data to support curation and integration. One project goal is to develop precise accounts of information resources carrying the same data. We present two complementary conceptual models for information representation: the Basic Representation Model (BRM) and the Systematic Assertion Model (SAM). We show how these models provide an analytical account of digitally-encoded scientific data and a precise understanding of identity and equivalence. The Basic Representation Model identifies the core entities and relationships involved in representing information carried by digital objects. In BRM, digital objects are symbol structures that express propositional content, and stand in layered encoding relationships. For example, an RDF description may be serialized as either XML or N3, and those expressions in turn may be encoded as either UTF-8 or UTF-16 sequences. Defining this encoding stack reveals distinctions necessary for a precise account of identity and equivalence


    N.S. Santos-Magalhães


    Full Text Available The advent of molecular genetic comprises a true revolution of far-reaching consequences for human-kind, which evolved into a specialized branch of the modern-day Biochemistry. The analysis of specicgenomic information are gaining wide-ranging interest because of their signicance to the early diag-nosis of disease, and the discovery of modern drugs. In order to take advantage of a wide assortmentof signal processing (SP algorithms, the primary step of modern genomic SP involves convertingsymbolic-DNA sequences into complex-valued signals. How to represent the genetic code? Despitebeing extensively known, the DNA mapping into proteins is one of the relevant discoveries of genetics.The genetic code (GC is revisited in this work, addressing other descriptions for it, which can beworthy for genomic SP. Three original representations are discussed. The inner-to-outer map buildson the unbalanced role of nucleotides of a codon. A two-dimensional-Gray genetic representationis oered as a structured map that can help interpreting DNA spectrograms or scalograms. Theseare among the powerful visual tools for genome analysis, which depends on the choice of the geneticmapping. Finally, the world-chart for the GC is investigated. Evoking the cyclic structure of thegenetic mapping, it can be folded joining the left-right borders, and the top-bottom frontiers. As aresult, the GC can be drawn on the surface of a sphere resembling a world-map. Eight parallels oflatitude are required (four in each hemisphere as well as four meridians of longitude associated tofour corresponding anti-meridians. The tropic circles have 11.25o, 33.75o, 56.25o, and 78.5o (Northand South. Starting from an arbitrary Greenwich meridian, the meridians of longitude can be plottedat 22.5o, 67.5o, 112.5o, and 157.5o (East and West. Each triplet is assigned to a single point on thesurface that we named Nirenberg-Kohamas Earth. Despite being valuable, usual representations forthe GC can be

  9. Haptics-based dynamic implicit solid modeling.

    Hua, Jing; Qin, Hong


    This paper systematically presents a novel, interactive solid modeling framework, Haptics-based Dynamic Implicit Solid Modeling, which is founded upon volumetric implicit functions and powerful physics-based modeling. In particular, we augment our modeling framework with a haptic mechanism in order to take advantage of additional realism associated with a 3D haptic interface. Our dynamic implicit solids are semi-algebraic sets of volumetric implicit functions and are governed by the principles of dynamics, hence responding to sculpting forces in a natural and predictable manner. In order to directly manipulate existing volumetric data sets as well as point clouds, we develop a hierarchical fitting algorithm to reconstruct and represent discrete data sets using our continuous implicit functions, which permit users to further design and edit those existing 3D models in real-time using a large variety of haptic and geometric toolkits, and visualize their interactive deformation at arbitrary resolution. The additional geometric and physical constraints afford more sophisticated control of the dynamic implicit solids. The versatility of our dynamic implicit modeling enables the user to easily modify both the geometry and the topology of modeled objects, while the inherent physical properties can offer an intuitive haptic interface for direct manipulation with force feedback.

  10. Combustion response modeling for composite solid propellants


    A computerized mathematical model of the combustion response function of composite solid propellants was developed with particular attention to the contributions of the solid phase heterogeneity. The one-dimensional model treats the solid phase as alternating layers of ammonium perchlorate and binder, with an exothermic melt layer at the surface. Solution of the Fourier heat equation in the solid provides temperature and heat flux distributions with space and time. The problem is solved by conserving the heat flux at the surface from that produced by a suitable model of the gas phase. An approximation of the BDP flame model is utilized to represent the gas phase. By the use of several reasonable assumptions, it is found that a significant portion of the problem can be solved in closed form. A method is presented by which the model can be applied to tetramodal particle size distributions. A computerized steady-state version of the model was completed, which served to validate the various approximations and lay a foundation for the combustion response modeling. The combustion response modeling was completed in a form which does not require an iterative solution, and some preliminary results were acquired.

  11. Locomotion and claw disorders in Norwegian dairy cows housed in freestalls with slatted concrete, solid concrete, or solid rubber flooring in the alleys.

    Fjeldaas, T; Sogstad, A M; Osterås, O


    This study was part of a cross-sectional project on freestall housing, and the aim was to compare locomotion and claw disorders in freestall dairy cattle herds with slatted concrete, solid concrete, or solid rubber flooring in the alleys. The final population for studying claw disorders consisted of 66 dairy herds with 2,709 dry or lactating cows, whereas the population for studying locomotion consisted of 54 herds with 2,216 cows. All herds used Norwegian Red as the main breed. The herds were visited by 15 trained claw trimmers one time during the period from the beginning of February to summer let-out onto pasture in 2008. The trimmers assessed locomotion scores (LocS) of all cows before trimming. At trimming, claw disorders were diagnosed and recorded in the Norwegian Claw Health Card. Estimates describing locomotion and claw disorders in the hind feet were identified by use of multivariable models fit with LocS and each claw disorder as dependent variables, respectively. Herd nested within claw trimmer was included in the model as random effects. The odds ratio (OR) of having LocS >2 and LocS >3 was 1.9 and 2.1, respectively, on slatted concrete compared with solid concrete. Fewer cases of dermatitis were found on slatted than solid concrete (OR=0.70) and a tendency was observed for fewer heel horn erosions on slatted concrete than solid rubber (OR=0.47). Hemorrhages of the white line and sole were more prevalent in herds housed on slatted and solid concrete than in those housed on solid rubber (OR=2.6 and OR=2.1, respectively). White line fissures were also more prevalent in herds housed on slatted and solid concrete than in those housed on solid rubber (OR=2.1 and OR=2.0, respectively). Double soles were more prevalent on solid concrete than solid rubber (OR=4.4). However, sole ulcers were less prevalent in herds with slatted and solid concrete than solid rubber (OR=0.39 and OR=0.53, respectively). Fewer corkscrewed claws were found on slatted concrete than

  12. Computer simulation of concentrated solid solution strengthening

    Kuo, C. T. K.; Arsenault, R. J.


    The interaction forces between a straight edge dislocation moving through a three-dimensional block containing a random array of solute atoms were determined. The yield stress at 0 K was obtained by determining the average maximum solute-dislocation interaction force that is encountered by edge dislocation, and an expression relating the yield stress to the length of the dislocation and the solute concentration is provided. The magnitude of the solid solution strengthening due to solute atoms can be determined directly from the numerical results, provided the dislocation line length that moves as a unit is specified.

  13. Pore-lining composition and capillary breakthrough pressure of mudstone caprocks : sealing efficiency at geologic CO2 storage sites.

    Heath, Jason E.; Nemer, Martin B.; McPherson, Brian J. O. L. (University of Utah, Salt Lake City, UT); Dewers, Thomas A.; Kotula, Paul Gabriel


    Subsurface containment of CO2 is predicated on effective caprock sealing. Many previous studies have relied on macroscopic measurements of capillary breakthrough pressure and other petrophysical properties without direct examination of solid phases that line pore networks and directly contact fluids. However, pore-lining phases strongly contribute to sealing behavior through interfacial interactions among CO2, brine, and the mineral or non-mineral phases. Our high resolution (i.e., sub-micron) examination of the composition of pore-lining phases of several continental and marine mudstones indicates that sealing efficiency (i.e., breakthrough pressure) is governed by pore shapes and pore-lining phases that are not identifiable except through direct characterization of pores. Bulk X-ray diffraction data does not indicate which phases line the pores and may be especially lacking for mudstones with organic material. Organics can line pores and may represent once-mobile phases that modify the wettability of an originally clay-lined pore network. For shallow formations (i.e., < {approx}800 m depth), interfacial tension and contact angles result in breakthrough pressures that may be as high as those needed to fracture the rock - thus, in the absence of fractures, capillary sealing efficiency is indicated. Deeper seals have poorer capillary sealing if mica-like wetting dominates the wettability. We thank the U.S. Department of Energy's National Energy Technology Laboratory and the Office of Basic Energy Sciences, and the Southeast and Southwest Carbon Sequestration Partnerships for supporting this work.

  14. Solid Phase Characterization of Solids Recovered from Failed Sluicer Arm

    Cooke, Gary A. [Hanford Site (HNF), Richland, WA (United States)


    The Enclosure to this memo discusses the solid phase characterization of a solid sample that was retrieved from the single-shell Tank 241-C-111 extended reach sluicer #2. This sluicer, removed from riser #3 on September 25, 2014, was found to have approximately 0.4 gallons of solid tank waste adhering to the nozzle area.

  15. Alabama ESI: ESI (Shoreline Types - Lines and Polygons)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing the shoreline and coastal habitats for Alabama, classified according to the Environmental Sensitivity...

  16. American Samoa ESI: HYDRO (Hydrography Lines and Polygons)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing coastal hydrography used in the creation of the Environmental Sensitivity Index (ESI) for American...

  17. Columbia River ESI: HYDRO (Hydrography Lines and Polygons)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing coastal hydrography used in the creation of the Environmental Sensitivity Index (ESI) for Columbia...

  18. Cook Inlet and Kenai Peninsula, Alaska ESI: FISHL (Fish Lines)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains biological resource data for anadromous fish streams in Cook Inlet and Kenai Peninsula, Alaska. Vector lines in this data set represent...

  19. Coastal Resources Atlas: Long Island: HYDRO (Hydrography Lines and Polygons)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing coastal hydrography used in the creation of the Environmental Sensitivity Index (ESI) for Long Island,...

  20. North Slope, Alaska ESI: HYDRO (Hydrography Lines and Polygons)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing coastal hydrography used in the creation of the Environmental Sensitivity Index (ESI) for the North...

  1. Bristol Bay, Alaska Subarea ESI: HYDRO (Hydrography Lines and Polygons)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing coastal hydrography used in the creation of the Environmental Sensitivity Index (ESI) for the Bristol...

  2. Louisiana ESI: ESI (Environmental Sensitivity Index Shoreline Types - Lines)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines representing the shoreline and coastal habitats of Louisiana classified according to the Environmental Sensitivity Index (ESI)...

  3. Southeast Alaska ESI: HYDRO (Hydrography Lines and Polygons)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing coastal hydrography used in the creation of the Environmental Sensitivity Index (ESI) for Southeast...

  4. Controlled Compact High Voltage Power Lines

    Postolati V.


    Full Text Available Nowadays modern overhead transmission lines (OHL constructions having several significant differences from conventional ones are being used in power grids more and more widely. Implementation of compact overhead lines equipped with FACTS devices, including phase angle regulator settings (compact controlled OHL, appears to be one of the most effective ways of power grid development. Compact controlled AC HV OHL represent a new generation of power transmission lines embodying recent advanced achievements in design solutions, including towers and insulation, together with interconnection schemes and control systems. Results of comprehensive research and development in relation to 110–500kV compact controlled power transmission lines together with theoretical basis, substantiation, and methodological approaches to their practical application are presented in the present paper.

  5. Minnesota County Boundaries - lines

    Minnesota Department of Natural Resources — Minnesota county boundaries derived from a combination of 1:24,000 scale PLS lines, 1:100,000 scale TIGER, 1:100,000 scale DLG, and 1:24,000 scale hydrography lines....

  6. Line graphs for fractals

    Warchalowski, Wiktor; Krawczyk, Malgorzata J.


    We found the Lindenmayer systems for line graphs built on selected fractals. We show that the fractal dimension of such obtained graphs in all analysed cases is the same as for their original graphs. Both for the original graphs and for their line graphs we identified classes of nodes which reflect symmetry of the graph.

  7. Database of emission lines

    Binette, L.; Ortiz, P.; Joguet, B.; Rola, C.


    A widely accessible data bank (available through Netscape) and consiting of all (or most) of the emission lines reported in the litterature is being built. It will comprise objects as diverse as HII regions, PN, AGN, HHO. One of its use will be to define/refine existing diagnostic emission line diagrams.

  8. The plasma-solid transition

    Celebonovic, V


    Using a criterion proposed by Salpeter and standard solid-state physics,we have determined conditions for the occurence of the plasma-solid transition.Possible astrophysical applications are discussed.

  9. Solid residues; Os residuos solidos



    This chapter gives a general overview on the general effects of the solid waste pollution, the principal pollutants emitted by the oil refineries, control actions for the solid waste emissions, the minimization actions, and the effluent treatment.

  10. Slip in viscous contact-line movement

    van Lengerich, Henrik; Steen, Paul; Breuer, Kenneth


    The typical continuum fluid dynamics formulation cannot be used to model the spreading of a liquid on a solid because a stress singularity prevents contact-line motion. It is well known that this situation can be remedied by introducing a slip. We perform Stokes-flow simulations with slip and compare these with experiments. In the experiment, liquid (squalane) is forced through two parallel sapphire plates (roughness 0.6nm), and the meniscus shape and its speed are measured. The slip-length for this liquid/solid pair has been measured previously in an independent experiment absent of contact lines (T. Schmatko et. al. PRL 94, 244501). The same geometry is used in a boundary integral method simulation, accurate to within a few molecular diameters in the vicinity of the contact-line. The slip-length in the simulations can be varied such that the meniscus shape matches the experiment. Preliminary results suggest this slip-length is an order of magnitude lower than that reported by Schmatko. Now at the University of Minnesota TC

  11. Overhead Utility Lines at Cedar Breaks National Monument, Utah (cebr_powerln)

    National Park Service, Department of the Interior — This coverage contains 49 arcs and 50 nodes representing power lines at Cedar Breaks National Monument. The power lines supply electricity and telephone services to...

  12. The Postsynthetic Renaissance in Porous Solids.

    Cohen, Seth M


    Metal-organic frameworks (MOFs) have rapidly grown into a major area of chemical research over the last two decades. MOFs represent the development of covalent chemistry "beyond the molecule" and into extended structures. MOFs also present an unprecedented scaffold for performing heterogeneous organic transformations in the solid state, allowing for deliberate and precise preparation of new materials. The development of these transformations has given rise to the "postsynthetic renaissance", a suite of methods by which these materials can be transformed in a single-crystal-to-single-crystal manner. Postsynthetic modification, postsynthetic deprotection, postsynthetic exchange, postsynthetic insertion, and postsynthetic polymerization have exploited the unique features of both the organic and inorganic components of MOFs to create crystalline, porous solids of unique complexity and functionality.

  13. Composition of municipal solid waste in Denmark

    Edjabou, Vincent Maklawe Essonanawe; Petersen, Claus; Scheutz, Charlotte


    comparability to characterize municipal solid waste. This methodology was applied to residual waste collected from 1,442 households in three municipalities in Denmark. The main fractions contributing to the residual household waste were food waste and miscellaneous waste. Statistical analysis suggested......Data for the composition of municipal solid waste is a critical basis for any assessment of waste technologies and waste management systems. The detailed quantification of waste fractions is absolutely needed for a better technological development of waste treatment. The current waste composition...... data in Denmark are among the most detailed in the world. However, these data are more than 10 years old, and the following issues remain very important: (1) sampling approach, (2) representativeness of samples, (3) data uncertainties, (4) time and geographical variation. Moreover, in the absence...

  14. Acoustics of solids

    Beltzer, Abraham I


    Technological developments in composite materials, non-destructive testing, and signal processing as well as biomedical applications, have stimulated wide-ranging engineering investigations of heterogeneous, anisotropic media and surface waves of different types. Wave propagation in solids is now of considerable importance in a variety of applications. The book presents many of the key results in this field and interprets them from a unified engineering viewpoint. The conceptual importance and relevance for applications were the prevailing criteria in selecting the topics. Included are body and surface waves in elastic, viscoelastic, and piezoelectric media and waveguides, with emphasis on the effects of inhomogeneity and anisotropy. The book differs in many aspects from the other monographs dealing with wave propagation in solids. It focuses on physically meaningful theoretical models, a broad spectrum of which is covered, and not on mathematical techniques. Some of the results, particularly those dealing wi...

  15. Edge remap for solids

    Kamm, James R.; Love, Edward; Robinson, Allen C; Young, Joseph G.; Ridzal, Denis


    We review the edge element formulation for describing the kinematics of hyperelastic solids. This approach is used to frame the problem of remapping the inverse deformation gradient for Arbitrary Lagrangian-Eulerian (ALE) simulations of solid dynamics. For hyperelastic materials, the stress state is completely determined by the deformation gradient, so remapping this quantity effectively updates the stress state of the material. A method, inspired by the constrained transport remap in electromagnetics, is reviewed, according to which the zero-curl constraint on the inverse deformation gradient is implicitly satisfied. Open issues related to the accuracy of this approach are identified. An optimization-based approach is implemented to enforce positivity of the determinant of the deformation gradient. The efficacy of this approach is illustrated with numerical examples.

  16. Thin Solid Oxide Cell


    The present invention relates to a thin and in principle unsupported solid oxide cell, comprising at least a porous anode layer, an electrolyte layer and a porous cathode layer, wherein the anode layer and the cathode layer comprise an electrolyte material, at least one metal and a catalyst...... material, and wherein the overall thickness of the thin reversible cell is about 150 [mu]m or less, and to a method for producing same. The present invention also relates to a thin and in principle unsupported solid oxide cell, comprising at least a porous anode layer, an electrolyte layer and a porous...... cathode layer, wherein the anode layer and the cathode layer comprise an electrolyte material and a catalyst material, wherein the electrolyte material is doper zirconia, and wherein the overall thickness of the thin reversible cell is about 150 [mu]m or less, and to a method for producing same...

  17. Amorphous pharmaceutical solids.

    Vranić, Edina


    Amorphous forms are, by definition, non-crystalline materials which possess no long-range order. Their structure can be thought of as being similar to that of a frozen liquid with the thermal fluctuations present in a liquid frozen out, leaving only "static" structural disorder. The amorphous solids have always been an essential part of pharmaceutical research, but the current interest has been raised by two developments: a growing attention to pharmaceutical solids in general, especially polymorphs and solvates and a revived interest in the science of glasses and the glass transition. Amorphous substances may be formed both intentionally and unintentionally during normal pharmaceutical manufacturing operations. The properties of amorphous materials can be exploited to improve the performance of pharmaceutical dosage forms, but these properties can also give rise to unwanted effects that need to be understood and managed in order for the systems to perform as required.

  18. Solid State Laser


    The Titan-CW Ti:sapphire (titanium-doped sapphire) tunable laser is an innovation in solid-state laser technology jointly developed by the Research and Solid State Laser Divisions of Schwartz Electro-optics, Inc. (SEO). SEO is producing the laser for the commercial market, an outgrowth of a program sponsored by Langley Research Center to develop Ti:sapphire technology for space use. SEO's Titan-CW series of Ti:sapphire tunable lasers have applicability in analytical equipment designed for qualitative analysis of carbohydrates and proteins, structural analysis of water, starch/sugar analyses, and measurements of salt in meat. Further applications are expected in semiconductor manufacture, in medicine for diagnosis and therapy, and in biochemistry.

  19. Fracture of brittle solids

    Lawn, Brian


    This is an advanced text for higher degree materials science students and researchers concerned with the strength of highly brittle covalent-ionic solids, principally ceramics. It is a reconstructed and greatly expanded edition of a book first published in 1975. The book presents a unified continuum, microstructural and atomistic treatment of modern day fracture mechanics from a materials perspective. Particular attention is directed to the basic elements of bonding and microstructure that govern the intrinsic toughness of ceramics. These elements hold the key to the future of ceramics as high-technology materials--to make brittle solids strong, we must first understand what makes them weak. The underlying theme of the book is the fundamental Griffith energy-balance concept of crack propagation. The early chapters develop fracture mechanics from the traditional continuum perspective, with attention to linear and nonlinear crack-tip fields, equilibrium and non-equilibrium crack states. It then describes the at...

  20. Thin Solid Oxide Cell


    The present invention relates to a thin and in principle unsupported solid oxide cell, comprising at least a porous anode layer, an electrolyte layer and a porous cathode layer, wherein the anode layer and the cathode layer comprise an electrolyte material, at least one metal and a catalyst...... material, and wherein the overall thickness of the thin reversible cell is about 150 [mu]m or less, and to a method for producing same. The present invention also relates to a thin and in principle unsupported solid oxide cell, comprising at least a porous anode layer, an electrolyte layer and a porous...... cathode layer, wherein the anode layer and the cathode layer comprise an electrolyte material and a catalyst material, wherein the electrolyte material is doper zirconia, and wherein the overall thickness of the thin reversible cell is about 150 [mu]m or less, and to a method for producing same...

  1. Amorphous Solid Water:

    Wenzel, Jack; Linderstrøm-Lang, C. U.; Rice, Stuart A.


    The structure factor of amorphous solid D2O deposited from the vapor at 10°K has been obtained by measuring the neutron diffraction spectrum in the wave vector transfer from 0.8 to 12.3 reciprocal angstroms. The results indicate that the phase investigated is amorphous and has a liquiid-like stru......The structure factor of amorphous solid D2O deposited from the vapor at 10°K has been obtained by measuring the neutron diffraction spectrum in the wave vector transfer from 0.8 to 12.3 reciprocal angstroms. The results indicate that the phase investigated is amorphous and has a liquiid...

  2. Solid waste handling

    Parazin, R.J.


    This study presents estimates of the solid radioactive waste quantities that will be generated in the Separations, Low-Level Waste Vitrification and High-Level Waste Vitrification facilities, collectively called the Tank Waste Remediation System Treatment Complex, over the life of these facilities. This study then considers previous estimates from other 200 Area generators and compares alternative methods of handling (segregation, packaging, assaying, shipping, etc.).

  3. Solid-state memcapacitor

    Martinez, J; Di Ventra, M.; Pershin, Yu. V.


    We suggest a possible realization of a solid-state memory capacitive (memcapacitive) system. Our approach relies on the slow polarization rate of a medium between plates of a regular capacitor. To achieve this goal, we consider a multi-layer structure embedded in a capacitor. The multi-layer structure is formed by metallic layers separated by an insulator so that non-linear electronic transport (tunneling) between the layers can occur. The suggested memcapacitor shows hysteretic charge-voltag...

  4. Diffusion in nanocrystalline solids

    Chadwick, Alan V.


    Enhanced atomic migration was an early observation from experimental studies into nanocrystalline solids. This contribution presents an overview of the available diffusion data for simple metals and ionic materials in nanocrystalline form. It will be shown that enhanced diffusion can be interpreted in terms of atomic transport along the interfaces, which are comparable to grain boundaries in coarse-grained analogues. However, the method of sample preparation is seen to play a major role in...

  5. Moving contact line problem: Advances and perspectives

    Yapu Zhao


    Full Text Available The solid-liquid interface, which is ubiquitous in nature and our daily life, plays fundamental roles in a variety of physical-chemical-biological-mechanical phenomena, for example in lubrication, crystal growth, and many biological reactions that govern the building of human body and the functioning of brain. A surge of interests in the moving contact line (MCL problem, which is still going on today, can be traced back to 1970s primarily because of the existence of the “Huh-Scriven paradox”. This paper, mainly from a solid mechanics perspective, describes very briefly the multidisciplinary nature of the MCL problem, then summarizes some major advances in this exciting research area, and some future directions are presented.

  6. Registration Appointment and Services for Representatives Management Information

    Social Security Administration — A new internet/intranet application that collects all representative information and establishes the relationship between the claimant and the representative. Allow...

  7. Solid state magnetism

    Crangle, John


    Solid state magnetism is important and attempts to understand magnetic properties have led to an increasingly deep insight into the fundamental make up of solids. Both experimental and theoretical research into magnetism continue to be very active, yet there is still much ground to cover before there can be a full understanding. There is a strong interplay between the developments of materials science and of magnetism. Hundreds of new materials have been dis­ covered, often with previously unobserved and puzzling magnetic prop­ erties. A large and growing technology exists that is based on the magnetic properties of materials. Very many devices used in everyday life involve magnetism and new applications are being invented all the time. Under­ standing the fundamental background to the applications is vital to using and developing them. The aim of this book is to provide a simple, up-to-date introduction to the study of solid state magnetism, both intrinsic and technical. It is designed to meet the needs a...

  8. Interstellar Solid Hydrogen

    Lin, Ching Yeh; Walker, Mark A


    We consider the possibility that solid molecular hydrogen is present in interstellar space. If so cosmic-rays and energetic photons cause ionisation in the solid leading to the formation of H6+. This ion is not produced by gas-phase reactions and its radiative transitions therefore provide a signature of solid H2 in the astrophysical context. The vibrational transitions of H6+ are yet to be observed in the laboratory, but we have characterised them in a quantum-theoretical treatment of the molecule; our calculations include anharmonic corrections, which are large. Here we report on those calculations and compare our results with astronomical data. In addition to the H6+ isotopomer, we focus on the deuterated species (HD)3+ which is expected to dominate at low ionisation rates as a result of isotopic condensation reactions. We can reliably predict the frequencies of the fundamental bands for five modes of vibration. For (HD)3+ all of these are found to lie close to some of the strongest of the pervasive mid-in...

  9. Line Matching Across Views Based on Multiple Line Matching Across Views Based on Multiple View Stereo

    FU Kang-Ping; SHEN Shu-Han; HU Zhan-Yi


    A graph-based multiple view line matching method is proposed based on results of multiple view stereo (MVS) al-gorithms. With the 3D points and their visibility information provided by MVS, point-line correspondences are firstly established through 3D-to-2D re-projection. Each image line detected in different views is described using a 3D point set as well as a unit vector representing its coarse 3D direction. From such a description, pairwise similarity and consistency are evaluated. Then, a graph is constructed to contain all image lines as nodes. To get a unified node distance measure, a spectral graph analysis method is employed. Finally, a modified DBSCAN algorithm is introduced to obtain reliable line matches from the graph. Experiments show that our method is more robust and exhibits better accuracy than the existing methods.

  10. [Combustion temperature measurement of solid propellant by remote sensing FTIR].

    Li, Yan; Wang, Jun-De; Sun, Xiu-Yun; Zhou, Xue-Tie


    The combustion temperature of solid propellant was measured in this paper. Emission spectra of the combustion flame were collected with remote sensing FTIR at the resolution of 4 cm(-1). The combustion temperatures with the burning time were calculated from the maximum spectral line intensity and the molecular rotation-vibration spectra of HF molecule, respectively. Combustion temperatures at each time were all 1 788.8 K from the maximum spectral line intensity method. For comparison, the temperatures calculated from the molecular rotation-vibration spectra were 1 859.7, 1 848. 3, 1 804.0 and 1 782.7 K, respectively. Results show that the two methods are all dependable in measuring combustion temperature of solid propellant. But the maximum spectral line intensity method is more convenient and rapid than the other when the combustion is relatively stable.

  11. Computer prediction system on solid/solid reaction kinetics


    A computer software system of kinetic predication of solid/solid reaction, KinPreSSR, was developed using Visual C++ and FoxPro. It includes two main modules, REACTION and DIFFUSION. KinPreSSR deals with the kinetics on the diffusion in solids as well as solid/solid reactions. The REACTION module in KinPreSSR was mainly described, which has organized the commonly recognized kinetic models, parameters, and employed both numerical and graphical methods for data analyses. The proper combination between the kinetic contents and the analytical methods enables users to use KinPreSSR for the evaluation and prediction of solid/solid reactions interested. As an example to show some of functions of KinPreSSR, the kinetics analysis for the reaction between SrCO3 and TiO2 powders to form SrTiO3 with a series of kinetic data from isothermal measurements was demonstrated.

  12. Solid waste management in Croatia in response to the European Landfill Directive.

    Stanic-Maruna, Ira; Fellner, Johann


    The European Landfill Directive 99/31/EC represents the most influential piece of waste legislation on the management of municipal solid waste. In addition to technical standards regarding the design and location of landfills, it calls for a decrease in the amount of biodegradable waste landfilled. In order to meet the reduction targets set in the Landfill Directive, national solid waste strategies need to be changed. This article outlines the impact of the Landfill Directive on the Croatian waste management strategy and discusses the key challenges of its implementation. In addition, three scenarios of future waste management (mechanical biological pre-treatment, waste-to-energy and landfilling) have been investigated and evaluated regarding environmental impacts and affordability. The results of the analysis show that Croatia has transposed the said Directive into its own legislation in an exemplary way. The developed national waste management strategy foresees the set up of a separate collection of recyclables, waste pre-treatment of MSW, as well as the upgrading of existing disposal sites to sanitary landfills. However, the practical progress of carrying out provisions implemented on paper is lagging behind. Concerning the investigated scenarios the results of the evaluation indicate that mechanical biological pre-treatment in conjunction with separate collection of recyclables appears to be the most feasible option (in terms of economic and ecologic parameters). This result is in line with the proposed national waste management strategy.


    Kipping, D. M.; Torres, G.; Buchhave, L. A.


    In most theories of planet formation, the snow-line represents a boundary between the emergence of the interior rocky planets and the exterior ice giants. The wide separation of the snow-line makes the discovery of transiting worlds challenging, yet transits would allow for detailed subsequent...

  14. Wood pole overhead lines

    Wareing, Brian


    This new book concentrates on the mechanical aspects of distribution wood pole lines, including live line working, environmental influences, climate change and international standards. Other topics include statutory requirements, safety, profiling, traditional and probabilistic design, weather loads, bare and covered conductors, different types of overhead systems, conductor choice, construction and maintenance. A section has also been devoted to the topic of lightning, which is one of the major sources of faults on overhead lines. The book focuses on the effects of this problem and the strate

  15. Relativistic Disc lines

    Fabian, A C; Parker, M L


    Broad emission lines, particularly broad iron-K lines, are now commonly seen in the X-ray spectra of luminous AGN and Galactic black hole binaries. Sensitive NuSTAR spectra over the energy range of 3-78 keV and high frequency reverberation spectra now confirm that these are relativistic disc lines produced by coronal irradiation of the innermost accretion flow around rapidly spinning black holes. General relativistic effects are essential in explaining the observations. Recent results are briefly reviewed here.

  16. Evaluation of municipal solid waste management in egyptian rural areas.

    El-Messery, Mamdouh A; Ismail, Gaber A; Arafa, Anwaar K


    A two years study was conducted to evaluate the solid waste management system in 143 villages representing the Egyptian rural areas. The study covers the legal responsibilities, service availability, environmental impacts, service providers, financial resources, private sector participation and the quality of collection services. According to UN reports more than 55% of Egyptian population lives in rural areas. A drastic change in the consumption pattern altered the quantity and quality of the generated solid wastes from these areas. Poor solid waste management systems are stigmata in most of the Egyptian rural areas. This causes several environmental and health problems. It has been found that solid waste collection services cover only 27% of the surveyed villages, while, the statistics show that 75% of the surveyed villages are formally covered. The service providers are local villager units, private contractors and civil community associations with a percentage share 71%, 24% and 5% respectively. The operated services among these sectors were 25%, 71% and 100% respectively. The share of private sector in solid waste management in rural areas is still very limited as a result of the poverty of these communities and the lack of recyclable materials in their solid waste. It has been found that direct throwing of solid waste on the banks of drains and canals as well as open dumping and uncontrolled burning of solid waste are the common practice in most of the Egyptian rural areas. The available land for landfill is not enough, pitiable designed, defectively constructed and unreliably operated. Although solid waste generated in rural areas has high organic contents, no composting plant was installed. Shortage in financial resources allocated for valorization of solid waste management in the Egyptian rural areas and lower collection fees are the main points of weakness which resulted in poor solid waste management systems. On the other hand, the farmer's participation

  17. Measurements of solids concentration and axial solids velocity in gas-solid two-phase flows.

    Nieuwland, J.J.; Meijer, R.; Kuipers, J.A.M.; Swaaij, van W.P.M.


    Several techniques reported in the literature for measuring solids concentration and solids velocity in (dense) gas-solid two-phase flow have been briefly reviewed. An optical measuring system, based on detection of light reflected by the suspended particles, has been developed to measure local soli

  18. Line Crack Subject to Antiplane Shear.


    coh-e~eMre-i.ý- for brilýttle DD I JOANඑ 1473 EDITION Of INOV 95 16 ONSOLu materials . SERCUIRITY CLASSIFICATIONOTISPE(IA.Daauta) "PART 1 GOVERNMENT... materials . 1. INTRODUCTION In several previous papers 1i] - [4] we discussed the state of stress near the tip of a sharp line crack in an elastic...homo- geneous and isotropic solids there exist only two material moduli, X’(Ix’-xl) and 1i’(jx’-xj) which are functions of the distance I-xl. The

  19. How Does a Liquid Wet a Solid? Hydrodynamics of Dynamic Contact Angles

    Rame, Enrique


    A contact line is defined at the intersection of a solid surface with the interface between two immiscible fluids. When one fluid displaces another immiscible fluid along a solid surface, the process is called dynamic wetting and a "moving" contact line (one whose position relative to the solid changes in time) often appears. The physics of dynamic wetting controls such natural and industrial processes as spraying of paints and insecticides, dishwashing, film formation and rupture in the eye and in the alveoli, application of coatings, printing, drying and imbibition of fibrous materials, oil recovery from porous rocks, and microfluidics.

  20. 29 CFR 417.19 - Assistant Secretary's representative.


    ... 29 Labor 2 2010-07-01 2010-07-01 false Assistant Secretary's representative. 417.19 Section 417.19... Union To Take Appropriate Remedial Action Following Subpart A Procedures § 417.19 Assistant Secretary's representative. The Assistant Secretary shall appoint a representative or representatives whose functions shall...

  1. 48 CFR 1830.7002-3 - Representative investment calculations.


    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Representative investment... Representative investment calculations. (a) The calculation of the representative investment requires... accounting period, the contractor shall either: (1) Determine a representative investment for the...

  2. Illustrating the Euler Line.

    Rubillo, James M.


    Euler's discovery about the centroid of a triangle trisecting the line segment joining its circumference to its orthocenter is discussed. An activity that will help students review fundamental concepts is included. (MNS)

  3. Agate Hydrologic Lines Edited

    National Park Service, Department of the Interior — This theme includes all hydrologic lines including rivers, intermittent streams, and pond shorelines. The source spatial data comes from agfohydp which is a DLG file...

  4. Electric Power Transmission Lines

    Department of Homeland Security — Transmission Lines are the system of structures, wires, insulators and associated hardware that carry electric energy from one point to another in an electric power...

  5. Kansas Electric Transmission Lines

    Kansas Data Access and Support Center — This data set is a digital representation of the EletcircTransmission lines for the State of Kansas as maintained by the Kansas Corporation Commission. Data is...

  6. Veterans Crisis Line

    Department of Veterans Affairs — The caring responders at the Veterans Crisis Line are specially trained and experienced in helping Veterans of all ages and circumstances. Some of the responders are...

  7. Storage of cell lines.

    Parker, Katharine A


    The successful storage of cell lines depends upon many factors, including the condition of the cells to be frozen and the experience of the operator. Attempting to freeze down unhealthy, contaminated or poorly labelled cells can have huge implications for a research laboratory. This chapter outlines the importance of good record keeping, vigilant monitoring, aseptic technique, and high-quality reagents in the successful storage and downstream propagation of cell lines.

  8. Explosive Line Wave Generators


    curvature produced by each line wave generator. Piezoelectric pins were used for an additional assessment of the explosive lens a visual assessment of the wave curvature from the high speed camera images, the explosive lens design was also evaluated using piezoelectric pins...High Explosive Firing Complex (HEFC). The various explosive line wave generators were taped vertically on a supporting board and the detonation wave

  9. On-Line and Off-Line Assessment of Metacognition

    Saraç, Seda; Karakelle, Sema


    The study investigates the interrelationships between different on-line and off-line measures for assessing metacognition. The participants were 47 fifth grade elementary students. Metacognition was assessed through two off-line and two on-line measures. The off-line measures consisted of a teacher rating scale and a self-report questionnaire. The…

  10. Containment of Solid Wastes in some Large Scandinavian Cities

    Du-Thinh, Kien


    Two kinds of containment of solid wastes - one in the vicinity of Copenhagen, the capital of Denmark, another on the outskirts of Gothenburg, the second largest city of sweden - are reviewed in this article. They represent two different approaches to waste management. Special attention is given t...

  11. Using Financial Incentives to Manage the Solid Waste Stream.

    Spindler, Charles J.


    This paper reviews two approaches to solid waste stream management that encourage recycling in the beverage industry, a model categorizing public policies directed at diverting postconsumer waste from the waste system, and industry initiatives in the context of these policies. Preemptive and compelled partnerships represent innovations in…

  12. Line-imaging Fabry-Perot interferometer

    Mathews, A.R.; Warnes, R.H.; Hemsing, W.F.; Whittemore, G.R.


    A method for measuring the velocity history of a line element on a shock-loaded solid has been demonstrated. Light from single-frequency laser is focused through a cylindrical lens to a line on a moving target. The return Doppler-shifted image is passed through a Fabry-Perot interferometer. Because only specific combinations of incident light angle and frequency can pass through the interferometer the output is an incomplete image of the moving target appearing as a set of fringes. This image is focused onto an electronic streak camera and swept in time. The fringe pattern changes with time as the target surface moves, allowing determination of velocity for each point on the target that forms a fringe. Because the velocity can only be measured at the fringe positions, it is necessary to use an interpolating polynomial to obtain a continuous function of time and velocity along the sampled lien. 9 refs., 7 figs.

  13. On multiscale moving contact line theory.

    Li, Shaofan; Fan, Houfu


    In this paper, a multiscale moving contact line (MMCL) theory is presented and employed to simulate liquid droplet spreading and capillary motion. The proposed MMCL theory combines a coarse-grained adhesive contact model with a fluid interface membrane theory, so that it can couple molecular scale adhesive interaction and surface tension with hydrodynamics of microscale flow. By doing so, the intermolecular force, the van der Waals or double layer force, separates and levitates the liquid droplet from the supporting solid substrate, which avoids the shear stress singularity caused by the no-slip condition in conventional hydrodynamics theory of moving contact line. Thus, the MMCL allows the difference of the surface energies and surface stresses to drive droplet spreading naturally. To validate the proposed MMCL theory, we have employed it to simulate droplet spreading over various elastic substrates. The numerical simulation results obtained by using MMCL are in good agreement with the molecular dynamics results reported in the literature.

  14. Evidence for a superglass state in solid 4He.

    Hunt, B; Pratt, E; Gadagkar, V; Yamashita, M; Balatsky, A V; Davis, J C


    Although solid helium-4 (4He) may be a supersolid, it also exhibits many phenomena unexpected in that context. We studied relaxation dynamics in the resonance frequency f(T) and dissipation D(T) of a torsional oscillator containing solid 4He. With the appearance of the "supersolid" state, the relaxation times within f(T) and D(T) began to increase rapidly together. More importantly, the relaxation processes in both D(T) and a component of f(T) exhibited a complex synchronized ultraslow evolution toward equilibrium. Analysis using a generalized rotational susceptibility revealed that, while exhibiting these apparently glassy dynamics, the phenomena were quantitatively inconsistent with a simple excitation freeze-out transition because the variation in f was far too large. One possibility is that amorphous solid 4He represents a new form of supersolid in which dynamical excitations within the solid control the superfluid phase stiffness.

  15. Optoelectronic Properties of Semiconductor Quantum Dot Solids for Photovoltaic Applications.

    Chistyakov, A A; Zvaigzne, M A; Nikitenko, V R; Tameev, A R; Martynov, I L; Prezhdo, O V


    Quantum dot (QD) solids represent a new type of condensed matter drawing high fundamental and applied interest. Quantum confinement in individual QDs, combined with macroscopic scale whole materials, leads to novel exciton and charge transfer features that are particularly relevant to optoelectronic applications. This Perspective discusses the structure of semiconductor QD solids, optical and spectral properties, charge carrier transport, and photovoltaic applications. The distance between adjacent nanoparticles and surface ligands influences greatly electrostatic interactions between QDs and, hence, charge and energy transfer. It is almost inevitable that QD solids exhibit energetic disorder that bears many similarities to disordered organic semiconductors, with charge and exciton transport described by the multiple trapping model. QD solids are synthesized at low cost from colloidal solutions by casting, spraying, and printing. A judicious selection of a layer sequence involving QDs with different size, composition, and ligands can be used to harvest sunlight over a wide spectral range, leading to inexpensive and efficient photovoltaic devices.

  16. Theory of Solid Surfaces.


    A~ —~ on 022 CAMBRIDGE UNIV (ENGLAND) CAVEND ISH LAB —. FIG 20/12 —“1THEORY OF SOLID SURFACES .(U) MAY 76 ~J C INKS ON, P W ANDERSON AF AFOSR...A~ D. ~ tLC .7~ ~~~~~~~ I In f or ~a t i oL O f f i c e r 111111 __________ ~~~~~~~~~~~~~~~ _________________ - -ii~ s ~~~~~~~~~~~~~ Abstract

  17. Atomic mechanics of solids

    MacPherson, A K


    This volume brings together some of the presently available theoretical techniques which will be useful in the design of solid-state materials. At present, it is impossible to specify the atomic composition of a material and its macroscopic physical properties. However, the future possibilities for such a science are being laid today. This is coming about due to the development of fast, cheap computers which will be able to undertake the calculations which are necessary.Since this field of science is fairly new, it is not yet quite clear which direction of analysis will eventually prov

  18. Solid medical waste

    Udofia, Emilia Asuquo; Gulis, Gabriel; Fobil, Julius


    BACKGROUND: Solid medical waste (SMW) in households is perceived to pose minimal risks to the public compared to SMW generated from healthcare facilities. While waste from healthcare facilities is subject to recommended safety measures to minimize risks to human health and the environment, similar......-demographic characteristics, medication related practices, the belief that one is at risk of diseases associated with SMW, SMW disposal practices and reported harm associated with SMW at home and in the community. RESULTS: Eighty percent and 89% of respondents discarded unwanted medicines and sharps in household refuse bins...

  19. Physics of solids

    Ketterson, John B


    This comprehensive text covers the basic physics of the solid state starting at an elementary level suitable for undergraduates but then advancing, in stages, to a graduate and advanced graduate level. In addition to treating the fundamental elastic, electrical, thermal, magnetic, structural, electronic, transport, optical, mechanical and compositional properties, we also discuss topics like superfluidity and superconductivity along with special topics such as strongly correlated systems, high-temperature superconductors, the quantum Hall effects, and graphene. Particular emphasis is given to so-called first principles calculations utilizing modern density functional theory which for many systems now allow accurate calculations of the electronic, magnetic, and thermal properties.

  20. Solid state physics

    Grosso, Giuseppe


    Solid State Physics is a textbook for students of physics, material science, chemistry, and engineering. It is the state-of-the-art presentation of the theoretical foundations and application of the quantum structure of matter and materials. This second edition provides timely coverage of the most important scientific breakthroughs of the last decade (especially in low-dimensional systems and quantum transport). It helps build readers' understanding of the newest advances in condensed matter physics with rigorous yet clear mathematics. Examples are an integral part of the text, carefully de