Economic and environmental effects of providing increased amounts of solid feed to veal calves.

Science.gov (United States)

Mollenhorst, H; Berentsen, P B M; Berends, H; Gerrits, W J J; de Boer, I J M

2016-03-01

Traditionally, veal calves receive most of their nutrients from milk replacer (MR). Nowadays, however, solid feed (SF; i.e., concentrates and roughages) increasingly substitutes for MR. Studies have shown that providing SF reduces different types of nonnutritive oral behaviors. The objective of this study was to assess the economic and environmental effects of substituting SF for MR in veal calf diets. With respect to environmental effects, we considered the emission of greenhouse gases and land occupation. Substitution rates were based on an experiment in which 160 calves were provided 2 mixtures of SF at 4 levels of dry matter (DM) intake. Mixtures of SF contained either 80% concentrates, 10% corn silage, and 10% straw on DM basis (C80) or 50% concentrates, 25% corn silage, and 25% straw (C50). The 4 levels of SF during the last 17 wk of the fattening period were 20, 100, 180, and 260 kg of DM SF. Additionally, provision of MR was adjusted to achieve equal rates of carcass gain. Substitution rates, representing the SF equivalent needed to substitute for 1 kg of DM MR, were 1.43 kg of DM for C80 and 1.61 kg of DM for C50. Economic effects were assessed based on prices and substitution rates of SF for MR and the possible penalty for carcass color. Environmental effects were assessed based on effects related to the production of feed ingredients, substitution rates, and changes in enteric methane emission and energy use for feed preparation. Costs of feeding SF needed to substitute for 1 kg of DM MR were €0.68 lower for C80 and €0.71 lower for C50, compared with the costs of feeding 1 kg of DM MR. When carcass color scores became too high, however, lower feeding costs were offset by lower revenues from meat. Emissions of greenhouse gases were hardly affected when SF intake was increased. In general, increased enteric methane emission were offset by lower emissions from feed production and energy use. Land occupation increased when intake of SF was increased

Increased Coal Replacement in a Cement Kiln Burner by Feeding a Mixture of Solid Hazardous Waste and Shredded Plastic Waste

OpenAIRE

Ariyaratne, W. K. Hiromi; Melaaen, Morten Christian; Tokheim, Lars-André

2013-01-01

The present study aims to find the maximum possible replacement of coal by combined feeding of plastic waste and solid hazardous waste mixed with wood chips (SHW) in rotary kiln burners used in cement kiln systems. The coal replacement should be achieved without negative impacts on product quality, emissions or overall operation of the process. A full-scale experiment was carried out in the rotary kiln burner of a cement kiln by varying SHW and plastic waste feeding rates. Experimental result...

Early pair housing increases solid feed intake and weight gains in dairy calves

OpenAIRE

Costa, J. H. C.; Meagher, R. K.; von Keyserlingk, M. A. G.; Weary, D. M.

2015-01-01

Dairy calves have traditionally been kept in individual pens throughout the milk-feeding period. Social rearing is associated with increased solid feed intake and hence higher weight gains before and after weaning. Little is known about the effect of the age at which social housing begins. The aim of this study was to assess the effects of early versus late pairing on feeding behavior and weight gain before and after weaning. Holstein bull calves were reared individually (n=8 calves), or pair...

Maximum organic carbon limits at different melter feed rates (U)

International Nuclear Information System (INIS)

Choi, A.S.

1995-01-01

This report documents the results of a study to assess the impact of varying melter feed rates on the maximum total organic carbon (TOC) limits allowable in the DWPF melter feed. Topics discussed include: carbon content; feed rate; feed composition; melter vapor space temperature; combustion and dilution air; off-gas surges; earlier work on maximum TOC; overview of models; and the results of the work completed

The effect of a self-efficacy-based educational programme on maternal breast feeding self-efficacy, breast feeding duration and exclusive breast feeding rates: A longitudinal study.

Science.gov (United States)

Chan, Man Yi; Ip, Wan Yim; Choi, Kai Chow

2016-05-01

breast feeding has a number of well-documented benefits. Numerous studies have been conducted to investigate an effective approach to increase the breast feeding rate, duration and exclusive breast feeding rate, in which maternal breast feeding self-efficacy was determined as one of the major contributors. Although numerous breast feeding educational programmes have been developed to enhance maternal breastfeeding self-efficacy, results on the effectiveness of these programmes remain inconclusive. this study aims to investigate the effectiveness of a self-efficacy-based breast feeding educational programme (SEBEP) in enhancing breast feeding self-efficacy, breast feeding duration and exclusive breast feeding rates among mothers in Hong Kong. eligible pregnant women were randomized to attend a 2.5-hour breast feeding workshop at 28-38 weeks of gestation and receive 30-60minutes of telephone counselling at two weeks post partum, whereas both intervention and control groups received usual care. At two weeks postpartum, the Breast feeding Self-Efficacy Scale-Short Form (BSES-SF) and a self-developed post partum questionnaire were completed via telephone interviews. The breast feeding duration, pattern of breast feeding and exclusive breast feeding rates were recorded at two weeks, four weeks, eight weeks and six months post partum. results of analyses based on an intention-to-treat (ITT) assumption showed a significant difference (p<0.01) in the change in BSES-SF mean scores between the mothers who received SEBEP and those who did not receive SEBEP at two weeks post partum. The exclusive breast feeding rate was 11.4% for the intervention group and 5.6% for the control group at six months post partum. the findings of this study highlight the feasibility of a major trial to implement breast feeding education targeted at increasing breast feeding self-efficacy and exclusive breast feeding rates in Hong Kong. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effects of early rumen development and solid feed composition on growth performance and abomasal health in veal calves.

Science.gov (United States)

Berends, H; van Reenen, C G; Stockhofe-Zurwieden, N; Gerrits, W J J

2012-06-01

The experiment was designed to study the importance of early rumen development and of the composition of solid feed intake on growth performance and abomasal health in milk-fed veal calves. One hundred and six Holstein-Friesian male calves were included in the experiment, and studied during 2 successive 12-wk periods (period 1 and period 2). In a 2 × 2 factorial arrangement, effects of partially replacing milk replacer by solid feed during period 1 and partially replacing dry matter (DM) intake from maize silage and barley straw by concentrate during period 2 were tested. Solid feed during period 1 consisted of maize silage, barley straw, and concentrate (25:25:50 on a DM basis). Solid feed during period 2 consisted of maize silage and barley straw (50:50 ratio on DM basis) for the nonconcentrate groups, and maize silage, barley straw and concentrates (25:25:50 on a DM basis) for the concentrate groups. At the end of period 1 (n=16) and at the end of period 2 (n=90), parameters of animal performance, rumen development, rumen fermentation, ruminal drinking, and abomasal damage were examined. Partially replacing milk replacer by solid feed during period 1 resulted in early rumen development (ERD) at the end of period 1, characterized by increased rumen weight, and an increased epithelial and absorptive surface area. Both ERD and partially replacing roughage by concentrates in period 2 increased the rumen development score at the end of period 2. Although ERD calves consumed more solid feed and less milk replacer during period 1 and 2 than non-ERD calves, carcass weight gains at 25 wk were identical, and utilization of the solid feed provided appeared similar to that of milk replacer. Partially replacing roughage by concentrates in period 2 increased dressing percentage and warm carcass weight. Plaque formation at the rumen mucosa was unaffected by ERD or partially replacing roughage by concentrates and generally low in all calves. The prevalence of large scars in

Livestock Feed Production from Sago Solid Waste by Pretreatment and Anaerobic Fermentation Process

Directory of Open Access Journals (Sweden)

Sumardiono Siswo

2018-01-01

Full Text Available Food needs in Indonesia is increasing, including beef. Today, Indonesia has problem to do self-sufficiency in beef. The cause of the problem is the quality of local beef is still lower compared with imported beef due to the quality of livestock feed consumed. To increase the quality of livestock is through pretreatment and fermentation. Source of livestock feed that processed is solid sago waste (Arenga microcarpa, because in Indonesia that is relatively abundant and not used optimally. Chemical pretreatment process for delignification is by using NaOH solution. The purposes of this research are to study NaOH pretreatment, the addition of Trichoderma sp, and fermentation time to improve the quality of sago solid waste as livestock feed through anaerobic fermentation. The variables used are addition or without addition (4%w NaOH solution and Trichoderma sp 1%w and fermentation time (7, 14 and 21 days, with the response of crude fiber and protein. The result of this research shows that the pretreatment with soaking of NaOH solution, addition of Trichoderma sp and 14 days of fermentation was more effective to improve the quality of solid sago waste with decrease of crude fiber from 33.37% to 17.36% and increase of crude protein from 4.00% to 7.96%.

Reduced larval feeding rate is a strong evolutionary correlate of ...

Indian Academy of Sciences (India)

Home; Journals; Journal of Genetics; Volume 85; Issue 3. Reduced larval feeding rate is a strong evolutionary correlate of rapid development in Drosophila melanogaster. M. Rajamani N. Raghavendra ... Keywords. life-history evolution; development time; larval feeding rate; competition; tradeoffs; Drosophila melanogaster.

Development of a feeding device for solid material; Kiinteaen materiaalin syoettoelaitteen kehittaeminen

Energy Technology Data Exchange (ETDEWEB)

Heinonen, O.; Tiihonen, J. [Imatran Voima Oy, Vantaa (Finland). R and D Section

1995-12-31

Feeding of solid fuel into high pressure is an essential part of the pressurized power plant processes. A pilot scale fuel feeder meeting the requirements of these processes has been designed and built by Imatran Voima Oy (IVO). The fuel feeder is capable of feeding both relatively dry and wet solid material into high pressure. The object of this project was to develop the pilot scale fuel feeder to commercial level. The project was financed by IVO and Bioenergia -research programme. The project included testing of the previously built pilot-feeder at real operating conditions using peat and wood biomass as feedstocks. The testing consisted of short term and long term runs, which provided information about the operation and durability of the feeder with different materials. The tests were carried out partly in IVO`s laboratory, and partly in Jyvaeskylae at the pressurized steam drying pilot plant owned by IVO and VTT. The pilot-feeder operated well and reliably during the feeding tests. The feeder was dissembled and the parts were inspected between and after the test periods. No sign of excessive wear of the parts was noticed. Based on the good experiences from the pilot scale testing a commercial feeder with the capacity of 50 m{sup 3}/h was designed

Development of a feeding device for solid material; Kiinteaen materiaalin syoettoelaitteen kehittaeminen

Energy Technology Data Exchange (ETDEWEB)

Heinonen, O.; Tiihonen, J [Imatran Voima Oy, Vantaa (Finland). R and D Section

1996-12-31

Feeding of solid fuel into high pressure is an essential part of the pressurized power plant processes. A pilot scale fuel feeder meeting the requirements of these processes has been designed and built by Imatran Voima Oy (IVO). The fuel feeder is capable of feeding both relatively dry and wet solid material into high pressure. The object of this project was to develop the pilot scale fuel feeder to commercial level. The project was financed by IVO and Bioenergia -research programme. The project included testing of the previously built pilot-feeder at real operating conditions using peat and wood biomass as feedstocks. The testing consisted of short term and long term runs, which provided information about the operation and durability of the feeder with different materials. The tests were carried out partly in IVO`s laboratory, and partly in Jyvaeskylae at the pressurized steam drying pilot plant owned by IVO and VTT. The pilot-feeder operated well and reliably during the feeding tests. The feeder was dissembled and the parts were inspected between and after the test periods. No sign of excessive wear of the parts was noticed. Based on the good experiences from the pilot scale testing a commercial feeder with the capacity of 50 m{sup 3}/h was designed

The influence of supplemented Curcuma in feed formulation to improve growth rate and feed efficiency of catfish (Clarias sp.)

Science.gov (United States)

Ulum, M. M.; Zubaidah, M.; Arief, M.; Prayogo

2018-04-01

Catfish (Clarias sp.) is very potential to be developed as a food fish. The use of the feed additive in feed intended to improve the health, productivity and compliance with animal nutrition. Feed additive is to use ginger are derived from nature.The purpose of this study was to determine the potential increase in feed formulation. The Curcuma effect on growth rate and feed efficiency of catfish (Clarias sp.). The method used experimental methods and design complete random with 4 treatments and 5 replications. The parameters examined in this study aregrowth rate and efficiency feed.The research showed that the ANOVA markedly dissimilar ( Padditive on formulations feed.

Self mixing of fly larvae during feeding

Science.gov (United States)

Shishkov, Olga; Johnson, Christopher; Hu, David

How do we sustainably feed a growing world population? One solution of increasing interest is the use of black solider fly larvae, pea-sized grubs envisioned to transform hundreds of tons of food waste into a sustainable protein source. Although startups across the world are raising these larvae, a physical understanding of how they should be raised and fed remains missing. In this study, we present experiments measuring their feeding rate as a function of number of larvae. We show that larger groups of larvae have greater mixing which entrains hungry larvae around the food, increasing feeding rate. Feeding of larvae thus differs from feeding of cattle or other livestock which exhibit less self-mixing.

Transition conditions for solid armatures in railguns with muzzle current feed

International Nuclear Information System (INIS)

Kareev, Yu.A.; Zayatdinov, R.M.

1995-01-01

Velocity skin effect is a principle reason that solid armatures in railguns transition from smooth metal-on-metal contact with the rails to arcing contact. Transition occurs when armature velocity reaches some critical value which depends weakly on current and strongly on the latent heat of evaporation and electrical conductivity of the armature material. Conductivity of the rail material is also a factor. The analysis shows that when current is fed to the armature from the muzzle of a railgun armature to rail current distribution is more uniform over the contact face than is the case with normal breech feed. The authors show that muzzle feed allows transition velocity to be increased three-fold

Semi-solid electrodes having high rate capability

Energy Technology Data Exchange (ETDEWEB)

Chiang, Yet-Ming; Duduta, Mihai; Holman, Richard; Limthongkul, Pimpa; Tan, Taison

2017-11-28

Embodiments described herein relate generally to electrochemical cells having high rate capability, and more particularly to devices, systems and methods of producing high capacity and high rate capability batteries having relatively thick semi-solid electrodes. In some embodiments, an electrochemical cell includes an anode and a semi-solid cathode. The semi-solid cathode includes a suspension of an active material of about 35% to about 75% by volume of an active material and about 0.5% to about 8% by volume of a conductive material in a non-aqueous liquid electrolyte. An ion-permeable membrane is disposed between the anode and the semi-solid cathode. The semi-solid cathode has a thickness of about 250 .mu.m to about 2,000 .mu.m, and the electrochemical cell has an area specific capacity of at least about 7 mAh/cm.sup.2 at a C-rate of C/4. In some embodiments, the semi-solid cathode slurry has a mixing index of at least about 0.9.

Addressing the recovery of feeding rates in post-exposure feeding bioassays: Cyathura carinata as a case study

Energy Technology Data Exchange (ETDEWEB)

Pais-Costa, Antonia Juliana [IMAR—Institute of Marine Research, MARE—Marine and Environmental Sciences Centre, Faculty of Sciences and Technology, University of Coimbra, 3004-517 Coimbra (Portugal); Acevedo, Pelayo [SaBio IREC, Instituto de Investigación en Recursos Cinegéticos (UCLM-CSIC-JCCM), Ciudad Real 13005 (Spain); Marques, João Carlos [IMAR—Institute of Marine Research, MARE—Marine and Environmental Sciences Centre, Faculty of Sciences and Technology, University of Coimbra, 3004-517 Coimbra (Portugal); Martinez-Haro, Mónica, E-mail: monica.martinezharo@gmail.com [IMAR—Institute of Marine Research, MARE—Marine and Environmental Sciences Centre, Faculty of Sciences and Technology, University of Coimbra, 3004-517 Coimbra (Portugal)

2015-02-15

Post-exposure bioassays are used in environmental assessment as a cost-effective tool, but the effects of organism's recovery after exposure to pollutant has not yet been addressed in detail. The recoveries of post-exposure feeding rates after being exposed to two sublethal concentrations of cadmium during two different exposure periods (48 h and 96 h) were evaluated under laboratory conditions using the estuarine isopod Cyathura carinata. Results showed that feeding depression was a stable endpoint up to 24 h after cadmium exposure, which is useful for ecotoxicological bioassays. - Highlights: • We studied recovery of post-exposure feeding rates 48–96 h after cadmium exposure. • The assay is based on the isopod Cyathura carinata. • Post-exposure feeding inhibition is a stable sublethal endpoint.

Trophic structure and feeding rates of forest soil invertebrate populations

Energy Technology Data Exchange (ETDEWEB)

McBrayer, J F; Reichle, D E

1971-01-01

Trophic level relationships of a soil invertebrate community were determined using the transient behavior of cesium-137 in experimental soil microcosms. Feeding rates were estimated from radionuclide mass balance equations using radiocesium uptake coefficients, equilibrium concentrations of /sup 137/Cs in consumers, and /sup 137/Cs composition of food bases. The fungivore trophic level included Scatopsidae larvae (Diptera), Enchytraeida (Annelida), Entomobryidae and Onychiuridae (Collembola), Rhodacaridae (Mesostigmata), and Oribatulidae, Camasiidae, Carabodidae, and Cymbaeremaeidae (Oribatei). Approximately 60% of the total faunal biomass occurred in the fungivore trophic level. Fungivores averaged 7.0 +/- 2.4% dry body weight ingested per day. Cecidomyiidae larvae (Diptera), Diplopoda, Isotomidae (Collembola), Uropodina, and Phthiracaridae (Oribatei) were determined to be surface-feeding saprophages. Subsurface-feeding saprophages included Symphyla, Cillibidae (Uropidina), and Palaeacaridae and Epilohmannidae (Oribatei). Surface-feeding saprophages averaged 1.0 +/- 0.4% dry body weight ingested per day. Feeding rates were not calculated for saprophages feeding within the mineral soil horizon. Predators included Dolichopodidae larvae (Diptera), gamasine mites, and the Scutacaridae and other prostigmatid mites. Predators averaged 2.5 +/- 1.0% dry body weight ingested per day. 15 references, 3 figures, 3 tables.

Activity and heart rate in semi-domesticated reindeer during adaptation to emergency feeding.

Science.gov (United States)

Nilsson, A; Ahman, B; Norberg, H; Redbo, I; Eloranta, E; Olsson, K

2006-06-15

Although reindeer are well adapted to limited food resources during winter, semi-domesticated reindeer are regularly fed when snow conditions are bad in order to prevent starvation. Feeding sometimes results in health problems and loss of animals. This study was made to assess if activity pattern in reindeer could be used as a tool for the reindeer herder in early detection of animals that are not adapting to feeding. The frequency of 10 behavioural categories was recorded in five groups of penned, eight-month-old, female semi-domesticated reindeer. Three reindeer per group were fitted with heart rate monitors. Lying was the most frequent behaviour, whilst there were few cases of agonistic behaviour. Heart rate varied during the day, with peaks during feeding and low heart rates in the early morning. Restricted feed intake resulted in more locomotion and seeking but less ruminating compared to feeding ad libitum. This was followed by a generally lower heart rate in reindeer in the restricted groups compared to controls. Subsequent feeding with different combinations of lichens, silage and pellets ad libitum resulted initially in significantly more of the animals lying curled up, compared to controls, combined with increased heart rates. As the experiment continued the general activity pattern, as well as the heart rate, gradually became more similar in all groups. Lying curled was the behavioural indicator most consistently affected by feed deprivation and adaptation to feeding and may thus be a useful indicator to distinguish individual reindeer that are not adjusting to feeding.

Economic and environmental effects of providing increased amounts of solid feed to veal calves

NARCIS (Netherlands)

Mollenhorst, H.; Berentsen, P.B.M.; Berends, H.; Gerrits, W.J.J.; Boer, de I.J.M.

2016-01-01

Traditionally, veal calves receive most of their nutrients from milk replacer (MR). Nowadays, however, solid feed (SF; i.e., concentrates and roughages) increasingly substitutes for MR. Studies have shown that providing SF reduces different types of nonnutritive oral behaviors. The objective of

Estimation of restaurant solid waste generation rates

International Nuclear Information System (INIS)

Heck, H.H.; Major, I.

2002-01-01

Most solid waste utilities try to create a billing schedule that is proportional to solid waste generation rates. This research was trying to determine if the current billing rate structure was appropriate or if a different rate structure should be implemented. A multiple regression model with forward stepwise addition was developed which accurately predicts weekly solid waste generation rates for restaurants. The model was based on a study of daily solid waste generation at twenty-one different businesses. The weight and volume of solid waste generated was measure daily for two weeks during the winter and two weeks during the summer. Researchers followed the collection truck and measured the volume and weight of the container contents. Data was collected on the following independent variables describing each establishment; weight of waste per collection, volume per collection, container utilization factor, building area, contract haulers bill, yearly property tax, yearly solid waste tax, average number of collections per week, type of restaurant, modal number of collections per week, storage container size, waste density, number of employees, number of hours open per week, and weekly collection capacity (collections per week times storage container size). Independent variables were added to the regression equation based on their partial correlation coefficient and confidence level. The regression equations developed had correlation coefficients of 0.87 to 1.00, which was much better than the correlation coefficient (0.84) of an existing model DeGeare and Ongerth (1971) and a correlation coefficient of 0.54 based on the current solid waste disposal tax. (author)

Effects of low-density feeding on elk–fetus contact rates on Wyoming feedgrounds

Science.gov (United States)

Creech, Tyler G.; Cross, Paul C.; Scurlock, Brandon M.; Maichak, Eric J.; Rogerson, Jared D.; Henningsen, John C.; Creel, Scott

2012-01-01

High seroprevalance for Brucella abortus among elk on Wyoming feedgrounds suggests that supplemental feeding may influence parasite transmission and disease dynamics by altering the rate at which elk contact infectious materials in their environment. We used proximity loggers and video cameras to estimate rates of elk-to-fetus contact (the primary source of brucellosis transmission) during winter supplemental feeding. We compared contact rates during high-density and low-density (LD) feeding treatments that provided the same total amount of food distributed over different areas. Low-density feeding led to >70% reductions in total number of contacts and number of individuals contacting a fetus. Proximity loggers and video cameras provided similar estimates of elk–fetus contact rates. Elk contacted fetuses and random control points equally, suggesting that elk were not attracted to fetuses but encountered them incidentally while feeding. The modeled relationship between contact rate and disease prevalence is nonlinear and LD feeding may result in large reductions in brucellosis prevalence, but this depends on the amount of transmission that occurs on and off feedgrounds.

Investigation of Rheological Impacts on the Defense Waste Processing Facility's Sludge Slurry Feed as Insoluble Solids and Wash Endpoints are Adjusted

International Nuclear Information System (INIS)

Fellinger, T. L.; Howard, S.J.; Lee, M.C.; Galloway, R.H.

2006-01-01

The Savannah River Site (SRS) is currently pursuing an aggressive program to empty its High Level Waste (HLW) tanks and immobilize its radioactive waste into a durable borosilicate glass in the Defense Waste Processing Facility (DWPF). To create a batch of feed for the DWPF, several tanks of radioactive sludge slurry are combined into one of the million gallon (i.e. 3.79 E06 liters) feed tanks for DWPF. Once these sludge slurries are combined, the soluble sodium and weight percent total solids are adjusted by a 'washing' process. The 'washing' process involves diluting the soluble sodium of the sludge slurry with inhibited water (0.015 M NaOH and 0.015 M NaNO 2 ) and allowing the sludge slurry to settle into two layers. The two layers in the tank consist of a clear supernate on top and a layer of settled sludge solids on the bottom. The clear supernate layer is then decanted to another hold tank. This 'washing' process is repeated until the desired wash endpoint (i.e. sodium concentration in the supernate) and weight percent total solids are achieved. A final washed batch of feed consists of approximately 500,000 gallons (i.e. 1.89 E06 liters). DWPF has already processed three batches of feed and is currently processing a fourth. Prior to processing a batch of feed in the DWPF, it must be well characterized. Samples of the prepared feed batch are sent to the Savannah River National Laboratory (SRNL) for this characterization. As a part of the SRNL characterization for the fourth batch, rheology measurements were performed. Measurements were performed at different weight percent insoluble solids loadings to mimic potential facility processing scenarios (i.e. mixing/pumping of concentrated sludge slurry). In order to determine the influence of the soluble Na on the rheological properties of the sample, the supernate of the 'as received' sample was adjusted from 1 M soluble Na to 0.5 M soluble Na by using a lab scale version of the 'washing' process. Rheology

Poultry feed based on protein hydrolysate derived from chrome-tanned leather solid waste: creating value from waste.

Science.gov (United States)

Chaudhary, Rubina; Pati, Anupama

2016-04-01

Leather industry generates huge amount of chrome-containing leather solid waste which creates major environment problems to tanners worldwide. Chrome-tanned leather solid waste is primarily chromium complex of collagen protein. The presence of chromium limits its protein application in animal feed industry. The purified protein hydrolysate with zero chromium could be used in poultry feed. In this study, an attempt has been made to assess performance of poultry with purified protein hydrolysate as a feed derived from chrome-tanned leather waste as partial replacement of soyabean meal as a sole source of protein for growing broiler chickens. Growth study was conducted to evaluate the effect of feeding protein hydrolysate on performance and physiochemical characteristics of meat of broiler chickens. Two experimental diets containing various levels of protein hydrolysate (EI-20 % and EII-30 %) were evaluated. The comparative study was performed as control with soyabean meal. Daily feed intake, body weight gain and feed conversion ratio were measured from day 8 to day 35. At the end of the study, birds were randomly selected and slaughtered to evaluate for physiochemical characteristics of meat. Diet had significant effects on feed intake and body weight gain. Birds fed with 20 and 30 % protein hydrolysate consumed 9.5 and 17.5 % higher amount of feed and gained 6.5 and 16.6 % higher than soyabean meal-fed birds. The current study produced evidence that protein hydrolysate can replace up to 75 % of soyabean meal in broiler diets without affecting either growth performance or meat characteristics.

A novel shredder for municipal solid waste (MSW): influence of feed moisture on breakage performance.

Science.gov (United States)

Luo, Siyi; Xiao, Bo; Xiao, Lei

2010-08-01

A novel MSW shredder was presented but many aspects of the shredder have not been fully characterized. The feed moisture is an important factor that influences crushing performance. This paper focuses on the effect of feed moisture. The breakage of municipal solid waste (MSW) at several moisture levels (0%, 10%, 20%, 40% and 60%) was conducted with a laboratory shredder to investigate the effect of feed moisture on product size distribution and specific energy consumption under two different hydraulic pressures (40 and 60 kg/cm(2)). The results showed definite effects of feed moisture on the product size distribution and specific energy consumption: there is a tendency for the fine production in products to decrease with increasing amounts of water content in the feed; with the increasing feed moisture, specific energy shows an increasing trend; the specific energy and product size distribution under lower hydraulic pressure is more sensitive to the feed moisture than it is under higher hydraulic pressure. (c) 2010. Published by Elsevier Ltd. All rights reserved.

Circadian cycles in growth and feeding rates of heterotrophic protist plankton

DEFF Research Database (Denmark)

Jakobsen, Hans Henrik; Strom, S.L.

2004-01-01

Growth and feeding rates of four species of planktonic marine heterotrophic protists showed pronounced diel cycles. In most cases, rates were higher during the day and lower at night. However, for the ciliate Strobilidium sp., growth was highest at night. In another ciliate species, Balanion...... comatum, no day-night difference in growth and feeding rates was found. Maintenance of day-night rate differences during 24-h exposures to continuous darkness demonstrated that most of these protists had circadian cycles. The heterotrophic dinoflagellate Oxyrrhis marina exhibited a clear irradiance...... to culturing in a day: night light cycle in O. marina and found that resetting the circadian cycle in this dinoflagellate temporarily arrested growth and feeding. We suggest that protists use a time-integrated light threshold rather than an instantaneous irradiance to maintain the circadian cell cycle...

A model of the evolution of larval feeding rate in Drosophila driven by conflicting energy demands.

Science.gov (United States)

Mueller, Laurence D; Barter, Thomas T

2015-02-01

Energy allocation is believed to drive trade-offs in life history evolution. We develop a physiological and genetic model of energy allocation that drives evolution of feeding rate in a well-studied model system. In a variety of stressful environments Drosophila larvae adapt by altering their rate of feeding. Drosophila larvae adapted to high levels of ammonia, urea, and the presence of parasitoids evolve lower feeding rates. Larvae adapted to crowded conditions evolve higher feeding rates. Feeding rates should affect gross food intake, metabolic rates, and efficiency of food utilization. We develop a model of larval net energy intake as a function of feeding rates. We show that when there are toxic compounds in the larval food that require energy for detoxification, larvae can maximize their energy intake by slowing their feeding rates. While the reduction in feeding rates may increase development time and decrease competitive ability, we show that genotypes with lower feeding rates can be favored by natural selection if they have a sufficiently elevated viability in the toxic environment. This work shows how a simple phenotype, larval feeding rates, may be of central importance in adaptation to a wide variety of stressful environments via its role in energy allocation.

Nutrient digestibility of veal calves fed large amounts of different solid feeds during the first 80 days of fattening

Directory of Open Access Journals (Sweden)

Marta Brscic

2014-10-01

Full Text Available The study aimed at evaluating nutrients apparent digestibility in veal calves fed 3 feeding plans based on milk-replacer plus large amounts of solid feeds differing in their composition during the first 80 days of fattening. Twelve Polish Friesian male calves (70.6±1.9 kg were randomly assigned to one of the following feeding treatments: i milk-replacer plus corn grain (CG; ii milk-replacer plus 80:20 mixture (as fed basis of corn grain and wheat straw (CGS; and iii milk-replacer plus 72:20:8 mixture of corn grain, wheat straw and extruded soybean (CGSES. Calves received the same milk-replacer but the daily amount was restricted (96% for CGSES calves to balance dietary protein. Total dry matter intake from milk-replacer and solid feeds was similar among treatments, but CGSES calves showed better growth performance than CG ones. Calves were introduced into a metabolism stall (1/pen during week 9 of fattening for a 3- day adaptation period and a 4-day digestibility trial. Calves fed CG showed the greatest DM, NFC, and ash digestibility while CGSES calves showed the lowest CP digestibility. Haemoglobin concentrations measured at day 5, 31 and 80 were similar among feeding treatments and significantly decreased over time. In CGSES treatment, the combination of milkreplacer with solid feed closer to a complete diet for ruminants led to better calves’ growth performance. However, the reduced protein digestibility with CGSES indicates that protein quality becomes a key factor when formulating diets for veal calves using alternatives to dairy sources.

Impact of Organic Loading Rate on Psychrophilic Anaerobic Digestion of Solid Dairy Manure

Directory of Open Access Journals (Sweden)

Noori M. Cata Saady

2015-03-01

Full Text Available Increasing the feed total solids to anaerobic digester improves the process economics and decreases the volume of liquid effluent from current wet anaerobic digestion. The objective of this study was to develop a novel psychrophilic (20 °C anaerobic digestion technology of undiluted cow feces (total solids of 11%–16%. Two sets of duplicate laboratory-scale sequence batch bioreactors have been operated at organic loading rates (OLR of 6.0 to 8.0 g total chemical oxygen demand (TCOD kg−1 inoculum day−1 (d−1 during 210 days. The results demonstrated that the process is feasible at treatment cycle length (TCL of 21 days; however, the quality of cow feces rather than the OLR had a direct influence on the specific methane yield (SMY. The SMY ranged between 124.5 ± 1.4 and 227.9 ± 4.8 normalized liter (NL CH4 kg−1 volatile solids (VS fed d−1. Substrate-to-inoculum mass ratio (SIR was 0.63 ± 0.05, 0.90 ± 0.09, and 1.06 ± 0.07 at OLR of 6.0, 7.0, and 8.0 g TCOD kg−1 inoculum d−1, respectively. No volatile fatty acids (VFAs accumulation has been observed which indicated that hydrolysis was the rate limiting step and VFAs have been consumed immediately. Bioreactors performance consistency in terms of the level of SMYs, VFAs concentrations at end of the TCL, pH stability and volatile solids reduction indicates a stable and reproducible process during the entire operation.

Semi-solid electrodes having high rate capability

Energy Technology Data Exchange (ETDEWEB)

Chiang, Yet-Ming; Duduta, Mihai; Holman, Richard; Limthongkul, Pimpa; Tan, Taison

2017-11-28

Embodiments described herein relate generally to electrochemical cells having high rate capability, and more particularly to devices, systems and methods of producing high capacity and high rate capability batteries having relatively thick semi-solid electrodes. In some embodiments, an electrochemical cell includes an anode, a semi-solid cathode that includes a suspension of an active material and a conductive material in a liquid electrolyte, and an ion permeable membrane disposed between the anode and the cathode. The semi-solid cathode has a thickness in the range of about 250 .mu.m-2,500 .mu.m, and the electrochemical cell has an area specific capacity of at least 5 mAh/cm.sup.2 at a C-rate of C/2.

Feed-forward control of a solid oxide fuel cell system with anode offgas recycle

Science.gov (United States)

Carré, Maxime; Brandenburger, Ralf; Friede, Wolfgang; Lapicque, François; Limbeck, Uwe; da Silva, Pedro

2015-05-01

In this work a combined heat and power unit (CHP unit) based on the solid oxide fuel cell (SOFC) technology is analysed. This unit has a special feature: the anode offgas is partially recycled to the anode inlet. Thus it is possible to increase the electrical efficiency and the system can be operated without external water feeding. A feed-forward control concept which allows secure operating conditions of the CHP unit as well as a maximization of its electrical efficiency is introduced and validated experimentally. The control algorithm requires a limited number of measurement values and few deterministic relations for its description.

Machinability baja AISI 1040 pada proses bubut dengan variasi cutting speed dan feed rate

Directory of Open Access Journals (Sweden)

AAIA Sri Komaladewi

2012-11-01

Full Text Available In order to obtain desired results of machining process (turning, parameter of process and material characteristic to be machined should be well known. This is due to different machining conditions and material yield different material machinability as well. It is needed to investigate of material machinability (AISI 1040 such as force, power and shear angle under different cutting speed (80, 160 and 240 m/min and feed rate (0.1, 0.2, and 0.3 mm/rev. The results of investigation show that; at the same cutting speed the higher feed rate the higher cutting force needed; the higher cutting speed and feed rate, the higher power needed; at feed rate 0.1 mm./rev and 0.3 mm/rev, the higher cutting speed the shear angles has a trend to incline; at feed rate 0.2 mm/rev, cutting speed from 80 to 160 m/min yield increasing of shear angle, however, from 160 to 240 m/min shear angle declines.

Fluid intake rates in ants correlate with their feeding habits.

Science.gov (United States)

Paul, J; Roces, F

2003-04-01

This study investigates the techniques of nectar feeding in 11 different ant species, and quantitatively compares fluid intake rates over a wide range of nectar concentrations in four species that largely differ in their feeding habits. Ants were observed to employ two different techniques for liquid food intake, in which the glossa works either as a passive duct-like structure (sucking), or as an up- and downwards moving shovel (licking). The technique employed for collecting fluids at ad libitum food sources was observed to be species-specific and to correlate with the presence or absence of a well-developed crop in the species under scrutiny. Workers of ponerine ants licked fluid food during foraging and transported it as a droplet between their mandibles, whereas workers of species belonging to phylogenetically more advanced subfamilies, with a crop capable of storing liquids, sucked the fluid food, such as formicine ants of the genus Camponotus. In order to evaluate the performance of fluid collection during foraging, intake rates for sucrose solutions of different concentrations were measured in four ant species that differ in their foraging ecology. Scaling functions between fluid intake rates and ant size were first established for the polymorphic species, so as to compare ants of different size across species. Results showed that fluid intake rate depended, as expected and previously reported in the literature, on sugar concentration and the associated fluid viscosity. It also depended on both the species-specific feeding technique and the extent of specialization on foraging on liquid food. For similarly-sized ants, workers of two nectar-feeding ant species, Camponotus rufipes (Formicinae) and Pachycondyla villosa (Ponerinae), collected fluids with the highest intake rates, while workers of the leaf-cutting ant Atta sexdens (Myrmicinae) and a predatory ant from the Rhytidoponera impressa-complex (Ponerinae) did so with the lowest rate. Calculating the

Effect of pre-weaning solid feed and milk intake on caecal content characteristics and performance of rabbits around weaning

Directory of Open Access Journals (Sweden)

Luca Juliano

2010-01-01

Full Text Available The aim of this study is to know the effect of different solid feed and milk intake during suckling on performance around weaning and on caecal content characteristics at weaning. In order to obtain different intakes of milk and solid feed, 13 litters of pregnant females (PF inseminated the day after delivery and 14 litters of non-pregnant females (NPF were compared. At birth the litters were equalized at eight pups and during lactation dead pups were replaced by pups of the same age from nursing does. Compared to the PF group, rabbits in the NPF group had a higher milk intake (26.0 versus 21.4 g/day; P < 0.01 and lower solid feed intake (9.1 versus 11.5 g/day; P < 0.01 between 20 and 28 days of age. No significant difference was observed between the two groups in weight gain before and post-weaning (28-49 days. At weaning, the rabbits in group PF showed higher values in caecal content (g 26.3 versus 22.6; P < 0.05 and volatile fatty acids (mmol/l 52.2 versus 43.6; P < 0.01 and lower values in empty caecal weight (g 7.18 versus 7.78; P < 0.05, C3 (6.4 versus 9.3%; P < 0.01 and C3/C4 ratio (0.39 versus 0.63; P < 0.01 than the group NPF. On the basis of the above results, it may be concluded that the quantity of solid feed and milk intake before weaning influenced the charac- teristics of the caecal content, but not the performance of rabbits around weaning.

Early pair housing increases solid feed intake and weight gains in dairy calves.

Science.gov (United States)

Costa, J H C; Meagher, R K; von Keyserlingk, M A G; Weary, D M

2015-09-01

Dairy calves have traditionally been kept in individual pens throughout the milk-feeding period. Social rearing is associated with increased solid feed intake and, hence, higher weight gains before and after weaning. Little is known about the effect of the age at which social housing begins. The aim of this study was to assess the effects of early versus late pairing on feeding behavior and weight gain before and after weaning. Holstein bull calves were reared individually (n=8 calves) or paired with another calf at 6±3 d (n=8 pairs) or 43±3 d of age (n=8 pairs). All calves were fed 8 L of milk/d for 4 wk, 6 L/d from 4 to 7 wk, and then milk was reduced by 20%/d until calves were completely weaned at 8 wk of age. Calves were provided ad libitumaccess to calf starter and a total mixed ration (TMR). Body weight and feed intake were measured weekly from 3 to 10 wk of age.Intake of calf starter was significantly higher for the early-paired calves than for individually reared and late-paired calves throughout the experimental period. At 10 wk of age, starter dry matter intake averaged 2.20±0.22, 1.09±0.25, and 1.26±0.33kg/d for early-paired, late-paired, and individually housed calves, respectively. Intake of TMR did not differ among treatments, TMR dry matter intake averaged 3.27±0.72, 3.08±0.46, and 2.89±0.54kg/d for the same 3 treatments. Calves in the early paired treatment also showed significantly higher average daily gain over the experimental period (0.89±0.04 vs. 0.76±0.04 and 0.73±0.04kg/d for the early-paired, individual, and late-paired calves, respectively). These results indicate that social housing soon after birth can increase weight gains and intake of solid feed. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Effect of water flow rate and feed training on "pacamã" (Siluriforme: Pseudopimelodidae juvenile production

Directory of Open Access Journals (Sweden)

R.K. Luz

2011-08-01

Full Text Available The effects of different water flow rates and feed training on the production of "pacamã" Lophiosilurus alexandri juveniles were evaluated. In the first experiment, nine day post-hatch larvae (n= 2,400 were stocked at a density of 5 larvae/L. Different water flow (F rates were tested: F1 = 180; F2 = 600; F3 = 1,300; and F4 = 2,600mL/min. Artemia nauplii were offered as food during the first 15 days of active feeding. In the second experiment for feed training, 720 juveniles (total length of 22.2mm were stocked at a density of 1.5 juveniles/L. A water flow rate similar to F1 was used. The use of extruded dry diet was tested, and feed training was done with and without other enhanced flavors (Artemia nauplii or Scott emulsion. The water flow rates did not influence the survival or growth of L. alexandri. Cannibalism occurred during feed training. The worst survival, specific growth rate and high mortality were found with the use of extruded dry diet, while similar values were registered with the different feed training diets used. Reduced water flow rate can be used to lower water consumption during larviculture and feed training of L. alexandri.

Baby-Led Introduction to SolidS (BLISS) study: a randomised controlled trial of a baby-led approach to complementary feeding.

Science.gov (United States)

Daniels, Lisa; Heath, Anne-Louise M; Williams, Sheila M; Cameron, Sonya L; Fleming, Elizabeth A; Taylor, Barry J; Wheeler, Ben J; Gibson, Rosalind S; Taylor, Rachael W

2015-11-12

In 2002, the World Health Organization recommended that the age for starting complementary feeding should be changed from 4 to 6 months of age to 6 months. Although this change in age has generated substantial debate, surprisingly little attention has been paid to whether advice on how to introduce complementary foods should also be changed. It has been proposed that by 6 months of age most infants will have developed sufficient motor skills to be able to feed themselves rather than needing to be spoon-fed by an adult. This has the potential to predispose infants to better growth by fostering better energy self-regulation, however no randomised controlled trials have been conducted to determine the benefits and risks of such a "baby-led" approach to complementary feeding. This is of particular interest given the widespread use of "Baby-Led Weaning" by parents internationally. The Baby-Led Introduction to SolidS (BLISS) study aims to assess the efficacy and acceptability of a modified version of Baby-Led Weaning that has been altered to address potential concerns with iron status, choking and growth faltering. The BLISS study will recruit 200 families from Dunedin, New Zealand, who book into the region's only maternity hospital. Parents will be randomised into an intervention (BLISS) or control group for a 12-month intervention with further follow-up at 24 months of age. Both groups will receive the standard Well Child care provided to all parents in New Zealand. The intervention group will receive additional parent contacts (n = 8) for support and education on BLISS from before birth to 12 months of age. Outcomes of interest include body mass index at 12 months of age (primary outcome), energy self-regulation, iron and zinc intake and status, diet quality, choking, growth faltering and acceptability to parents. This study is expected to provide insight into the feasibility of a baby-led approach to complementary feeding and the extent to which this method of

Effect of supplementary feed and stocking rate on the production of ...

African Journals Online (AJOL)

This study was conducted to determine the effect of two different levels of supplementary feed and two different stocking rates on the production of grazing ostriches. One hundred and seventy ostriches were randomly allocated to four groups and kept on irrigated lucerne pasture with or without supplementary feed from ...

Low-protein solid feed improves the utilization of milk replacer for protein gain in veal calves

NARCIS (Netherlands)

Berends, H.; Borne, van den J.J.G.C.; Alferink, S.J.J.; Reenen, van C.G.; Bokkers, E.A.M.; Gerrits, W.J.J.

2012-01-01

This study was designed to quantify the contribution of low-protein solid feed (SF) intake, in addition to milk replacer, to protein and energy retention in veal calves. Because of potential interactions between milk replacer and SF, occurring at either the level of digestion or postabsorption, this

Adherence with early infant feeding and complementary feeding guidelines in the Cork BASELINE Birth Cohort Study.

Science.gov (United States)

O'Donovan, Sinéad M; Murray, Deirdre M; Hourihane, Jonathan O'B; Kenny, Louise C; Irvine, Alan D; Kiely, Mairead

2015-10-01

To describe adherence with infant feeding and complementary feeding guidelines. Prospective study of infant feeding and complementary feeding practices were collected as part of the Cork BASELINE Birth Cohort Study. Cork, Ireland. Data are described for the 823 infants for whom a diary was completed. Breast-feeding was initiated in 81 % of infants, and 34 %, 14 % and 1 % of infants were exclusively breast-fed at hospital discharge, 2 and 6 months, respectively. Stage one infant formula decreased from 71 % at 2 months to 13 % at 12 months. The majority of infants (79 %) were introduced to solids between 17 and 26 weeks and 18 % were given solid foods before 17 weeks. Mothers of infants who commenced complementary feeding prior to 17 weeks were younger (29·8 v. 31·5 years; P<0·001) and more likely to smoke (18 v. 8 %; P=0·004). The first food was usually baby rice (69 %), infant breakfast cereals (14 %) or fruit/vegetables (14 %). Meals were generally home-made (49 %), cereal-based (35 %), manufactured (10 %), dairy (3 %) and dessert-based (3 %). The median gap between the first-second, second-third, third-fourth and fourth-fifth new foods was 4, 2, 2 and 2 d, respectively. We present the largest prospective cohort study to date on early infant feeding in Ireland. The rate of breast-feeding is low by international norms. Most mothers introduce complementary foods between 4 and 6 months with lengthy gaps between each new food/food product. There is a high prevalence of exposure to infant breakfast cereals, which are composite foods, among the first foods introduced.

Domestic animal hosts strongly influence human-feeding rates of the Chagas disease vector Triatoma infestans in Argentina.

Directory of Open Access Journals (Sweden)

Ricardo E Gürtler

Full Text Available The host species composition in a household and their relative availability affect the host-feeding choices of blood-sucking insects and parasite transmission risks. We investigated four hypotheses regarding factors that affect blood-feeding rates, proportion of human-fed bugs (human blood index, and daily human-feeding rates of Triatoma infestans, the main vector of Chagas disease.A cross-sectional survey collected triatomines in human sleeping quarters (domiciles of 49 of 270 rural houses in northwestern Argentina. We developed an improved way of estimating the human-feeding rate of domestic T. infestans populations. We fitted generalized linear mixed-effects models to a global model with six explanatory variables (chicken blood index, dog blood index, bug stage, numbers of human residents, bug abundance, and maximum temperature during the night preceding bug catch and three response variables (daily blood-feeding rate, human blood index, and daily human-feeding rate. Coefficients were estimated via multimodel inference with model averaging.Median blood-feeding intervals per late-stage bug were 4.1 days, with large variations among households. The main bloodmeal sources were humans (68%, chickens (22%, and dogs (9%. Blood-feeding rates decreased with increases in the chicken blood index. Both the human blood index and daily human-feeding rate decreased substantially with increasing proportions of chicken- or dog-fed bugs, or the presence of chickens indoors. Improved calculations estimated the mean daily human-feeding rate per late-stage bug at 0.231 (95% confidence interval, 0.157-0.305.Based on the changing availability of chickens in domiciles during spring-summer and the much larger infectivity of dogs compared with humans, we infer that the net effects of chickens in the presence of transmission-competent hosts may be more adequately described by zoopotentiation than by zooprophylaxis. Domestic animals in domiciles profoundly affect the

Relationships of feedlot feed efficiency, performance, and feeding behavior with metabolic rate, methane production, and energy partitioning in beef cattle.

Science.gov (United States)

Nkrumah, J D; Okine, E K; Mathison, G W; Schmid, K; Li, C; Basarab, J A; Price, M A; Wang, Z; Moore, S S

2006-01-01

Residual feed intake (RFI) is the difference between the actual and expected feed intake of an animal based on its BW and growth rate over a specified period. The biological mechanisms underlying the variation in feed efficiency in animals with similar BW and growth rate are not well understood. This study determined the relationship of feedlot feed efficiency, performance, and feeding behavior with digestion and energy partitioning of 27 steers. The steers were selected from a total of 306 animals based on their RFI following feedlot tests at the University of Alberta Kinsella Research Station. Selected steers were ranked into high RFI (RFI > 0.5 SD above the mean, n = 11), medium RFI (RFI +/- 0.5 SD above and below the mean, n = 8), and low RFI (RFI 0.10). Residual feed intake was correlated with daily methane production and energy lost as methane (r = 0.44; P < 0.05). Methane production was 28 and 24% less in low-RFI animals compared with high- and medium-RFI animals, respectively. Residual feed intake tended to be associated (P < 0.10) with apparent digestibilities of DM (r = -0.33) and CP (r = -0.34). The RFI of steers was correlated with DE (r = -0.41; P < 0.05), ME (r = -0.44; P < 0.05), heat production (HP; r = 0.68; P < 0.001), and retained energy (RE; r = -0.67; P < 0.001; energy values are expressed in kcal/kg of BW(0.75)). Feedlot partial efficiency of growth was correlated (P < 0.01) with methane production (r = -0.55), DE (r = 0.46), ME (r = 0.49), HP (r = -0.50), and RE (r = 0.62). With the exception of HP (r = 0.37; P < 0.05), feed conversion ratio was unrelated to the traits considered in the study. Feeding duration was correlated (P < 0.01) with apparent digestibility of DM (r = -0.55), CP (r = -0.47), methane production (r = 0.51), DE (r = -0.52), ME (r = -0.55), and RE (r = -0.60). These results have practical implications for the selection of animals that eat less at a similar BW and growth rate and for the environmental sustainability of beef

Seasonal Variability of Mesozooplankton Feeding Rates on Phytoplankton in Subtropical Coastal and Estuarine Waters

Directory of Open Access Journals (Sweden)

Mianrun Chen

2017-06-01

Full Text Available In order to understand how mesozooplankton assemblages influenced phytoplankton in coastal and estuarine waters, we carried out a monthly investigation on mesozooplankton composition at two contrasting stations of Hong Kong coastal and estuarine waters and simultaneously conducted bottle incubation feeding experiments. The assemblage of mesozooplankton was omnivorous at both stations with varying carnivory degree (the degree of feeding preference of protozoa and animal food to phytoplankton and the variations of carnivory degree were significantly associated with microzooplankton biomass (ciliates for the coastal station, both ciliates and dinoflagellates for the estuarine stations and physical environmental parameters (primarily salinity. High carnivory was primarily due to high composition of noctilucales, Corycaeus spp., Oithona spp. and Acartia spp. Results of feeding experiments showed that grazing impacts on phytoplankton ranged from −5.9 to 17.7%, while the mean impacts were just <4% at both stations. The impacts were size-dependent, by which mesozooplankton consumed around 9% of large-sized phytoplankton while indirectly caused an increase of 4% of small-sized phytoplankton. Mesozooplankton clearance rate on phytoplankton, calculated from the log response of chlorophyll a concentrations by the introduction of bulk grazers after 1-day incubation, was significantly reduced by increasing carnivory degree of the mesozooplankton assemblage. The mechanism for the reduction of mesozooplankton clearance rate with increasing carnivory degree was primarily due to less efficient of filtering feeding and stronger trophic cascades due to suppression of microzooplankton. The feeding rates of mesozooplankton on microzooplankton were not obtained in this study, but the trophic cascades indirectly induced by mesozooplankton carnivorous feeding can be observed by the negative clearance rate on small-sized phytoplankton. Overall, the main significance of

Evaluation of apple pomace based reconstituted feed in rats after solid state fermentation and ethanol recovery

Directory of Open Access Journals (Sweden)

A. Devrajan

2004-03-01

Full Text Available To utilize apple pomace in an economical and effective way, a feed was developed by solid state fermentation (SSF using sequential interactive co-culture of Candida utilis and Kloeckera. Removal of ethanol and drying of the left - over residue. Feeding trial was conducted in white albino rats before and after reconstitution of apple pomace feed in the choice and no choice study. Feeding of apple pomace feed in the rats before reconstitution indicated that neither in fermented nor in unfermented form it was acceptable. In the no choice study both in 100% fermented and unfermented apple pomace group feed intake decreased continuously resulting in death of rats apparently due to decreased digestibility owing to high fibre content. Further, fermented or unfermented apple pomace based feed had lower digestibility and efficiency of conversion than the standard rat feed. Compared to the standard feed group, growth rates in all the feed groups were negative. The results of choice study of different feeds corroborated with the no-choice study mentioned earlier. Incorporation of fermented apple pomace into standard rat feed in the ratio of 1:1 gave better acceptability and digestibility. Reconstituted feed with 10% jaggery, 2% groundnut oil, 0.01% mixed flavour and 1% salt was the most acceptable. The post-mortem examination of the rats that died during the feeding trial revealed generalized oedema, probably due to some hepatotoxin in the feed. The blood glucose level in the apple pomace feed group except that was reconstituted with jaggery, showed a general hypoglycemia, though falling in the range. The increased ALT and AST levels in the serum also suggest damage to the liver. The mortality rate, post-mortem examination of the rats that died during the feeding trial and blood biochemical analysis of rat serum suggest a more elaborative study for extended period of time.Para utilizar bagaço de maçã de uma maneira econômica e eficaz, foi desenvolvido

Session 1: Public health nutrition. Breast-feeding practices in Ireland.

LENUS (Irish Health Repository)

Tarrant, R C

2008-11-01

Breast-feeding is the superior infant feeding method from birth, with research consistently demonstrating its numerous short- and long-term health benefits for both mother and infant. As a global recommendation the WHO advises that mothers should exclusively breast-feed for the first 6-months of life, thus delaying the introduction of solids during this time. Historically, Irish breast-feeding initiation rates have remained strikingly low in comparison with international data and there has been little improvement in breast-feeding duration rates. There is wide geographical variation in terms of breast-feeding initiation both internationally and in Ireland. Some of these differences in breast-feeding rates may be associated with differing socio-economic characteristics. A recent cross-sectional prospective study of 561 pregnant women attending a Dublin hospital and followed from the antenatal period to 6 months post partum has found that 47% of the Irish-national mothers initiated breast-feeding, while only 24% were still offering \\'any\\' breast milk to their infants at 6 weeks. Mothers\\' positive antenatal feeding intention to breast-feed is indicated as one of the most important independent determinants of initiation and \\'any\\' breast-feeding at 6 weeks, suggesting that the antenatal period should be targeted as an effective time to influence and affect mothers\\' attitudes and beliefs pertaining to breast-feeding. These results suggest that the \\'cultural\\' barrier towards breast-feeding appears to still prevail in Ireland and consequently an environment that enables women to breast-feed is far from being achieved. Undoubtedly, a shift towards a more positive and accepting breast-feeding culture is required if national breast-feeding rates are to improve.

Exclusive Breastfeeding Rate and Complementary Feeding Indicators in China: A National Representative Survey in 2013

Directory of Open Access Journals (Sweden)

Yifan Duan

2018-02-01

Full Text Available Appropriate infant and young child feeding could reduce morbidity and mortality and could improve cognitive development of children. However, nationwide data on exclusive breastfeeding and complementary feeding status in China are scarce. The aim of this study was to assess current exclusive breastfeeding and complementary feeding status in China. A national representative survey (Chinese National Nutrition and Health Survey of children aged under 6 years was done in 2013. Stratified multistage cluster sampling was used to select study participants. World Health Organization (WHO infant and young child feeding indicators were firstly used to assess exclusive breastfeeding and complementary feeding practice nationwide. In total, 14,458 children aged under two years (0 to <730 days were studied from 55 counties in 30 provinces in China. The crude exclusive breastfeeding rate under 6 months was 20.7% (908/4381 and the weighted exclusive breastfeeding rate was 18.6%. The crude prevalence of minimum dietary diversity, minimum meal frequency and minimum acceptable diet were 52.5% (5286/10,071, 69.8% (7027/10,071, and 27.4% (2764/10,071 among children aged 6–23 months, respectively. The weighted rate was 53.7%, 69.1%, and 25.1%, respectively. Residential area, household income and maternal education were positively associated with the three complementary feeding indicators. The exclusive breastfeeding rate under 6 months was low and complementary feeding practice was not optimal in China. Residential area, household income and maternal education might be used to target infants and young children to improve complementary feeding practice.

Effect of protein provision via milk replacer or solid feed on protein metabolism in veal calves

NARCIS (Netherlands)

Berends, H.; Borne, van den J.J.G.C.; Røjen, B.A.; Hendriks, W.H.; Gerrits, W.J.J.

2015-01-01

The current study evaluated the effects of protein provision to calves fed a combination of solid feed (SF) and milk replacer (MR) at equal total N intake on urea recycling and N retention. Nitrogen balance traits and [15N2]urea kinetics were measured in 30 calves (23 wk of age, 180 ± 3.7 kg of body

Food consumption and growth rates of juvenile black carp fed natural and prepared feeds

Science.gov (United States)

Hodgins, Nathaniel C.; Schramm, Harold L.; Gerard, Patrick D.

2014-01-01

The introduced mollusciphagic black carp Mylopharyngodon piceus poses a significant threat to native mollusks in temperate waters throughout the northern hemisphere, but consumption rates necessary to estimate the magnitude of impact on mollusks have not been established. We measured food consumption and growth rates for small (77–245 g) and large (466–1,071 g) triploid black carp held individually under laboratory conditions at 20, 25, and 30°C. Daily consumption rates (g food · g wet weight fish−1·d−1·100) of black carp that received prepared feed increased with temperature (small black carp 1.39–1.71; large black carp 1.28–2.10), but temperature-related increases in specific growth rate (100[ln(final weight) - ln(initial weight)]/number of days) only occurred for the large black carp (small black carp −0.02 to 0.19; large black carp 0.16–0.65). Neither daily consumption rates (5.90–6.28) nor specific growth rates (0.05–0.24) differed among temperatures for small black carp fed live snails. The results of these laboratory feeding trials indicate food consumption rates can vary from 289.9 to 349.5 J·g−1·d−1 for 150 g black carp receiving prepared feed, from 268.8 to 441.0 J·g−1·d−1for 800 g black carp receiving prepared feed, and from 84.8 to 90.2 J·g−1·d−1 for 150 g black carp that feed on snails. Applying estimated daily consumption rates to estimated biomass of native mollusks indicates that a relatively low biomass of bla

Yield Stress Reduction of DWPF Melter Feed Slurries

International Nuclear Information System (INIS)

Stone, M.E.; Smith, M.E.

2007-01-01

The Defense Waste Processing Facility (DWPF) at the Savannah River Site vitrifies High Level Waste for repository internment. The process consists of three major steps: waste pretreatment, vitrification, and canister decontamination/sealing. The HLW consists of insoluble metal hydroxides and soluble sodium salts. The pretreatment process acidifies the sludge with nitric and formic acids, adds the glass formers as glass frit, then concentrates the resulting slurry to approximately 50 weight percent (wt%) total solids. This slurry is fed to the joule-heated melter where the remaining water is evaporated followed by calcination of the solids and conversion to glass. The Savannah River National Laboratory (SRNL) is currently assisting DWPF efforts to increase throughput of the melter. As part of this effort, SRNL has investigated methods to increase the solids content of the melter feed to reduce the heat load required to complete the evaporation of water and allow more of the energy available to calcine and vitrify the waste. The process equipment in the facility is fixed and cannot process materials with high yield stresses, therefore increasing the solids content will require that the yield stress of the melter feed slurries be reduced. Changing the glass former added during pretreatment from an irregularly shaped glass frit to nearly spherical beads was evaluated. The evaluation required a systems approach which included evaluations of the effectiveness of beads in reducing the melter feed yield stress as well as evaluations of the processing impacts of changing the frit morphology. Processing impacts of beads include changing the settling rate of the glass former (which effects mixing and sampling of the melter feed slurry and the frit addition equipment) as well as impacts on the melt behavior due to decreased surface area of the beads versus frit. Beads were produced from the DWPF process frit by fire polishing. The frit was allowed to free fall through a flame

Trend overtime of total haemoglobin, iron metabolism and trace minerals in veal calves fed high amounts of two different solid feeds

Directory of Open Access Journals (Sweden)

Anna-Lisa Stefani

2010-01-01

Full Text Available Fifty Polish Friesian veal calves were administrated high amounts of two different solid feeds (maize grain and a mix diet containing 10% of straw and 8% of soy in addition to the traditional milk replacer diet. Compared to the mix diet, maize grain had a lower content of iron, copper and zinc and a minor fibre level. Effects of the two diets on calves’ blood haemoglobin, iron, iron metabolism parameters, copper and zinc concentrations were studied. Haemoglobin concentration resulted higher at the end of the fattening for calves fed the mix diet, as expected. Values remained, however, within ranges that allowed acceptable carcass paleness. Haematic iron, unsaturated iron binding capacity (UIBC and total iron binding capacity (TIBC levels were not significantly different between the two solid feeds. Lower copper and zinc blood concentrations resulted for calves fed the mix diet were likely due to the feed fibre interfering with the bioavailability of the two minerals, according to what happens for iron.

Nocturnal Light Pulses Lower Carbon Dioxide Production Rate without Affecting Feed Intake in Geese

Directory of Open Access Journals (Sweden)

De-Jia Huang

2016-03-01

Full Text Available This study was conducted to investigate the effect of nocturnal light pulses (NLPs on the feed intake and metabolic rate in geese. Fourteen adult Chinese geese were penned individually, and randomly assigned to either the C (control or NLP group. The C group was exposed to a 12L:12D photoperiod (12 h light and 12 h darkness per day, whereas the NLP group was exposed to a 12L:12D photoperiod inserted by 15-min lighting at 2-h intervals in the scotophase. The weight of the feed was automatically recorded at 1-min intervals for 1 wk. The fasting carbon dioxide production rate (CO2 PR was recorded at 1-min intervals for 1 d. The results revealed that neither the daily feed intake nor the feed intakes during both the daytime and nighttime were affected by photoperiodic regimen, and the feed intake during the daytime did not differ from that during the nighttime. The photoperiodic treatment did not affect the time distribution of feed intake. However, NLPs lowered (p<0.05 the mean and minimal CO2 PR during both the daytime and nighttime. Both the mean and minimal CO2 PR during the daytime were significantly higher (p<0.05 than those during the nighttime. We concluded that NLPs lowered metabolic rate of the geese, but did not affect the feed intake; both the mean and minimal CO2 PR were higher during the daytime than during the nighttime.

Low nitrous oxide production through nitrifier-denitrification in intermittent-feed high-rate nitritation reactors

DEFF Research Database (Denmark)

Su, Qingxian; Ma, Chun; Domingo-Felez, Carlos

2017-01-01

Nitrous oxide (N2O) production from autotrophic nitrogen conversion processes, especially nitritation systems, can be significant, requires understanding and calls for mitigation. In this study, the rates and pathways of N2O production were quantified in two lab-scale sequencing batch reactors...... to maintain high nitritation efficiency and high nitritation rates at 20-26 °C over a period of ∼300 days. Even at the high nitritation efficiencies, net N2O production was low (∼2% of the oxidized ammonium). Net N2O production rates transiently increased with a rise in pH after each feeding, suggesting...... operated with intermittent feeding and demonstrating long-term and high-rate nitritation. The resulting reactor biomass was highly enriched in ammonia-oxidizing bacteria, and converted ∼93 ± 14% of the oxidized ammonium to nitrite. The low DO set-point combined with intermittent feeding was sufficient...

Feeding Your Baby

Medline Plus

Full Text Available ... In This Topic Breastfeeding help Breastfeeding is best Food allergies and baby Formula feeding How to breastfeed Keeping breast milk safe and healthy Problems and discomforts when breastfeeding Starting your baby on solid foods Using a breast pump Baby Feeding your baby ...

Effect on Dietary Protein and Feeding Rate on Growth of Tiger Grouper (Epinephelus Fuscoguttatus) Juvenile

OpenAIRE

Marzuqi, Muhammad; Astuti, Ni Wayan Widya; Suwirya, Ketut

2012-01-01

The grouper fish culture was developed after its succesful seed production in hatchery well known. In grow-out culture grouper, the protein requirement and feeding rate have to know well in order to understand the effectiveness on feed utilization . The experiment was designed by factorial design with the first factor as 3 dietary protein (36%, 42%, 48%) and the second factor as 3 feeding rate ( 1,5%, 2,0%, 2,5%). Ten of juvenile tiger grouper (102, 51-102, 73 g of body weight) were stocked i...

Contraction intensity and feeding affect collagen and myofibrillar protein synthesis rates differently in human skeletal muscle

DEFF Research Database (Denmark)

Holm, Lars; Hall, Gerrit van; Rose, Adam John

2010-01-01

Exercise stimulates muscle protein fractional synthesis rate (FSR) but the importance of contractile intensity and whether it interplays with feeding is not understood. This was investigated following two distinct resistance exercise (RE) contraction intensities using an intra-subject design...... to feeding. Further, although functionally linked, the contractile and the supportive matrix structures upregulate their protein synthesis rate quite differently in response to feeding and contractile-activity and -intensity....

Trickle Bed Reactor Operation under Forced Liquid Feed Rate Modulation

Czech Academy of Sciences Publication Activity Database

Hanika, Jiří; Jiřičný, Vladimír; Karnetová, P.; Kolena, J.; Lederer, J.; Skála, D.; Staněk, Vladimír; Tukač, V.

2007-01-01

Roč. 13, č. 4 (2007), s. 192-198 ISSN 1451-9372 R&D Projects: GA MPO(CZ) FT-TA/039 Institutional research plan: CEZ:AV0Z40720504 Keywords : trickle -bed reactor * period * feed rate Subject RIV: CI - Industrial Chemistry, Chemical Engineering

Proposal of indicators to evaluate complementary feeding based on World Health Organization indicators.

Science.gov (United States)

Saldan, Paula Chuproski; Venancio, Sonia Isoyama; Saldiva, Silvia Regina Dias Medici; de Mello, Débora Falleiros

2016-09-01

This study compares complementary feeding World Health Organization (WHO) indicators with those built in accordance with Brazilian recommendations (Ten Steps to Healthy Feeding). A cross-sectional study was carried out during the National Immunization Campaign against Poliomyelitis in Guarapuava-Paraná, Brazil, in 2012. Feeding data from 1,355 children aged 6-23 months were obtained through the 24 h diet recall. Based on five indicators, the proportion of adequacy was evaluated: introduction of solid, semi-solid, or soft foods; minimum dietary diversity; meal frequency; acceptable diet; and consumption of iron-rich foods. Complementary feeding showed adequacy higher than 85% in most WHO indicators, while review by the Ten Steps assessment method showed a less favorable circumstance and a high intake of unhealthy foods. WHO indicators may not reflect the complementary feeding conditions of children in countries with low malnutrition rates and an increased prevalence of overweight/obesity. The use of indicators according to the Ten Steps can be useful to identify problems and redirect actions aimed at promoting complementary feeding. © 2016 John Wiley & Sons Australia, Ltd.

Feeding Your Baby

Medline Plus

Full Text Available ... baby formula , find out how to choose the best one for your baby and how to make bottle-feeding safe. And then get ready for solid foods ! In This Topic Breastfeeding help Breastfeeding is best Food allergies and baby Formula feeding How to ...

Effects of early rumen development and solid feed composition on growth performance and abomasal health in veal calves.

NARCIS (Netherlands)

Berends, H.; Reenen, van C.G.; Stockhofe, N.; Gerrits, W.J.J.

2012-01-01

The experiment was designed to study the importance of early rumen development and of the composition of solid feed intake on growth performance and abomasal health in milk-fed veal calves. One hundred and six Holstein-Friesian male calves were included in the experiment, and studied during 2

A review of control strategies for manipulating the feed rate in fed-batch fermentation processes

DEFF Research Database (Denmark)

Mears, Lisa; Stocks, Stuart M.; Sin, Gürkan

2017-01-01

. This review covers a range of strategies which have been employed to use the feed rate as a manipulated variable in a control strategy. The feed rate is chosen as the focus for this review, as it is seen that this variable may be used towards many different objectives depending on the process of interest...

Melter feed viscosity during conversion to glass: Comparison between low-activity waste and high-level waste feeds

Energy Technology Data Exchange (ETDEWEB)

Jin, Tongan [Pacific Northwest National Laboratory, Richland Washington; Chun, Jaehun [Pacific Northwest National Laboratory, Richland Washington; Dixon, Derek R. [Pacific Northwest National Laboratory, Richland Washington; Kim, Dongsang [Pacific Northwest National Laboratory, Richland Washington; Crum, Jarrod V. [Pacific Northwest National Laboratory, Richland Washington; Bonham, Charles C. [Pacific Northwest National Laboratory, Richland Washington; VanderVeer, Bradley J. [Pacific Northwest National Laboratory, Richland Washington; Rodriguez, Carmen P. [Pacific Northwest National Laboratory, Richland Washington; Weese, Brigitte L. [Pacific Northwest National Laboratory, Richland Washington; Schweiger, Michael J. [Pacific Northwest National Laboratory, Richland Washington; Kruger, Albert A. [U.S. Department of Energy, Office of River Protection, Richland Washington; Hrma, Pavel [Pacific Northwest National Laboratory, Richland Washington

2017-12-07

During nuclear waste vitrification, a melter feed (generally a slurry-like mixture of a nuclear waste and various glass forming and modifying additives) is charged into the melter where undissolved refractory constituents are suspended together with evolved gas bubbles from complex reactions. Knowledge of flow properties of various reacting melter feeds is necessary to understand their unique feed-to-glass conversion processes occurring within a floating layer of melter feed called a cold cap. The viscosity of two low-activity waste (LAW) melter feeds were studied during heating and correlated with volume fractions of undissolved solid phase and gas phase. In contrast to the high-level waste (HLW) melter feed, the effects of undissolved solid and gas phases play comparable roles and are required to represent the viscosity of LAW melter feeds. This study can help bring physical insights to feed viscosity of reacting melter feeds with different compositions and foaming behavior in nuclear waste vitrification.

Feeding Your Baby

Medline Plus

Full Text Available ... In This Topic Breastfeeding help Breastfeeding is best Food allergies and baby Formula feeding How to breastfeed Keeping a breastfeeding log Keeping breast milk safe and healthy Problems and discomforts when breastfeeding Starting your baby on solid foods Using a breast pump Baby Feeding your baby ...

Investigation of column flotation process on sulphide ore using 2-electrode capacitance sensor: The effect of air flow rate and solid percentage

Science.gov (United States)

Haryono, Didied; Harjanto, Sri; Wijaya, Rifky; Oediyani, Soesaptri; Nugraha, Harisma; Huda, Mahfudz Al; Taruno, Warsito Purwo

2018-04-01

Investigation of column flotation process on sulphide ore using 2-electrode capacitance sensor is presented in this paper. The effect of air flow rate and solid percentage on column flotation process has been experimentally investigated. The purpose of this paper is to understand the capacitance signal characteristic affected by the air flow rate and the solid percentage which can be used to determine the metallurgical performance. Experiments were performed using a laboratory column flotation cell which has a diameter of 5 cm and the total height of 140 cm. The sintered ceramic sparger and wash water were installed at the bottom and above of the column. Two-electrode concave type capacitance sensor was also installed at a distance of 50 cm from the sparger. The sensor was attached to the outer wall of the column, connected to data acquisition system, manufactured by CTECH Labs Edwar Technology and personal computer for further data processing. Feed consisting ZnS and SiO2 with the ratio of 3:2 was mixed with some reagents to make 1 litre of slurry. The slurry was fed into the aerated column at 100 cm above the sparger with a constant rate and the capacitance signals were captured during the process. In this paper, 7.5 and 10% of solid and 2-4 L/min of air flow rate with 0.5 L/min intervals were used as independent variables. The results show that the capacitance signal characteristics between the 7.5 and 10% of solid are different at any given air flow rate in which the 10% solid produced signals higher than those of 7.5%. Metallurgical performance and capacitance signal exhibit a good correlation.

SLUDGE BATCH 4 BASELINE MELT RATE FURNACE AND SLURRY-FED MELT RATE FURNACE TESTS WITH FRITS 418 AND 510 (U)

International Nuclear Information System (INIS)

Smith, M; Timothy Jones, T; Donald02 Miller, D

2007-01-01

' describes the number of equivalent canisters that would be produced from the beginning of the current contract period before SB3 is blended with SB4. The melt rate for the SMRF SB4/Frit 510 test was 14.6 grams/minute. Due to cold cap mounding problems with the SMRF SB4/Frit 418 feed at 50 weight % solids that prevented a melt rate determination, this feed was diluted to 45 weight % solids. The melt rate for this diluted feed was 8.9 grams/minute. A correction factor of 1.2 for estimating the melt rate at 50 weight % solids from 45 weight % solids test results (based on previous SMRF testing5) was then used to estimate a melt rate of 10.7 grams/minute for SB4/Frit 418 at 50 weight % solids. Therefore, the use of Frit 510 versus Frit 418 with SB4 resulted in a higher melt rate (14.6 versus an estimated 10.7 grams/minute). For reference, a previous SMRF test with SB3/Frit 418 feed at 35% waste loading and 50 weight % solids resulted in a melt rate of 14.1 grams/minute. Therefore, depending on the actual feed rheology, the use of Frit 510 with SB4 could result in similar melt rates as experienced with SB3/Frit 418 feed in the DWPF

The effect of feed rate and recycle rate variable on leaching process of Na2Zro3 with HCl in continuous stirred tank reactor (CSTR) series

Science.gov (United States)

Palupi, Bekti; Supranto, Sediawan, Wahyudi Budi; Setyadji, Moch.

2017-05-01

This time, the natural resources of zircon sand is processed into several zirconium products which is utilized for various industries, such as ceramics, glass industry, metal industry and nuclear industry. The process of zircon sand into zirconium products through several stages, one of them is leaching process of Na2ZrO3 with HCl. In this research, several variations of recycle-rate/feed-rate had been done to determine the effect on leaching process. The leaching was processed at temperature of 90°C, ratio of Na2ZrO3:HCl = 1g:30mL, and 142 rotary per minute of stirring speed for 30 minutes with variation of recycle-rate/feed-rate such as 0.478, 0.299, 0.218, 0.171 and 0.141. The diameter size of Na2ZrO3 powder that used are 0.088 to 0.149 mm. This process was carried out in Continuous Stirred Tank Reactor (CSTR) series with recycle. Based on this research, the greater of the recycle-rate/feed-rate variable, the obtained Zr recovery decreased. The correlation between recycle-rate/feed-rate and Zr recovery is shown by the equation y = -146.91x + 103.51, where y is the Zr recovery and x is the recycle-rate/feed-rate. The highest Zr recovery was 90.52% obtained at recycle-rate/feed-rate 0.141. The mathematical modeling involving the probability model P(r) = 2β2r2 exp(-βr2) can be applied to this leaching process with Sum of Squared Errors (SSE) values in the range of 6×10-7 - 7×10-6.

In situ feeding rates of plantonic copepods: A comparison of four methods

DEFF Research Database (Denmark)

Kiørboe, Thomas; Møhlenberg, Flemming; Riisgård, Hans Ulrik

1985-01-01

into estimates of in situ algal grazing rates by means of independently estimated gut turnover times, and were compared with chlorophyll and particle-volume grazing rates of animals sampled simultaneously and incubated in water from the collection depth. In addition, egg-production rates of adult females were...... problems of the different methods are discussed, and it is concluded that they all approach representative (although minimum) estimates of in situ feeding rates....

Three-dimensional granular model of semi-solid metallic alloys undergoing solidification: Fluid flow and localization of feeding

International Nuclear Information System (INIS)

Sistaninia, M.; Phillion, A.B.; Drezet, J.-M.; Rappaz, M.

2012-01-01

A three-dimensional (3-D) granular model which simulates fluid flow within solidifying alloys with a globular microstructure, such as that found in grain refined Al alloys, is presented. The model geometry within a representative volume element (RVE) consists of a set of prismatic triangular elements representing the intergranular liquid channels. The pressure field within the liquid channels is calculated using a finite elements (FEs) method assuming a Poiseuille flow within each channel and flow conservation at triple lines. The fluid flow is induced by solidification shrinkage and openings at grain boundaries due to deformation of the coherent solid. The granular model predictions are validated against bulk data calculated with averaging techniques. The results show that a fluid flow simulation of globular semi-solid materials is able to reproduce both a map of the 3-D intergranular pressure and the localization of feeding within the mushy zone. A new hot cracking sensitivity coefficient is then proposed. Based on a mass balance performed over a solidifying isothermal volume element, this coefficient accounts for tensile deformation of the semi-solid domain and for the induced intergranular liquid feeding. The fluid flow model is then used to calculate the pressure drop in the mushy zone during the direct chill casting of aluminum alloy billets. The predicted pressure demonstrates that deep in the mushy zone where the permeability is low the local pressure can be significantly lower than the pressure predicted by averaging techniques.

High burn rate solid composite propellants

Science.gov (United States)

Manship, Timothy D.

High burn rate propellants help maintain high levels of thrust without requiring complex, high surface area grain geometries. Utilizing high burn rate propellants allows for simplified grain geometries that not only make production of the grains easier, but the simplified grains tend to have better mechanical strength, which is important in missiles undergoing high-g accelerations. Additionally, high burn rate propellants allow for a higher volumetric loading which reduces the overall missile's size and weight. The purpose of this study is to present methods of achieving a high burn rate propellant and to develop a composite propellant formulation that burns at 1.5 inches per second at 1000 psia. In this study, several means of achieving a high burn rate propellant were presented. In addition, several candidate approaches were evaluated using the Kepner-Tregoe method with hydroxyl terminated polybutadiene (HTPB)-based propellants using burn rate modifiers and dicyclopentadiene (DCPD)-based propellants being selected for further evaluation. Propellants with varying levels of nano-aluminum, nano-iron oxide, FeBTA, and overall solids loading were produced using the HTPB binder and evaluated in order to determine the effect the various ingredients have on the burn rate and to find a formulation that provides the burn rate desired. Experiments were conducted to compare the burn rates of propellants using the binders HTPB and DCPD. The DCPD formulation matched that of the baseline HTPB mix. Finally, GAP-plasticized DCPD gumstock dogbones were attempted to be made for mechanical evaluation. Results from the study show that nano-additives have a substantial effect on propellant burn rate with nano-iron oxide having the largest influence. Of the formulations tested, the highest burn rate was a 84% solids loading mix using nano-aluminum nano-iron oxide, and ammonium perchlorate in a 3:1(20 micron: 200 micron) ratio which achieved a burn rate of 1.2 inches per second at 1000

Phylogenetic rate shifts in feeding time during the evolution of Homo.

Science.gov (United States)

Organ, Chris; Nunn, Charles L; Machanda, Zarin; Wrangham, Richard W

2011-08-30

Unique among animals, humans eat a diet rich in cooked and nonthermally processed food. The ancestors of modern humans who invented food processing (including cooking) gained critical advantages in survival and fitness through increased caloric intake. However, the time and manner in which food processing became biologically significant are uncertain. Here, we assess the inferred evolutionary consequences of food processing in the human lineage by applying a Bayesian phylogenetic outlier test to a comparative dataset of feeding time in humans and nonhuman primates. We find that modern humans spend an order of magnitude less time feeding than predicted by phylogeny and body mass (4.7% vs. predicted 48% of daily activity). This result suggests that a substantial evolutionary rate change in feeding time occurred along the human branch after the human-chimpanzee split. Along this same branch, Homo erectus shows a marked reduction in molar size that is followed by a gradual, although erratic, decline in H. sapiens. We show that reduction in molar size in early Homo (H. habilis and H. rudolfensis) is explicable by phylogeny and body size alone. By contrast, the change in molar size to H. erectus, H. neanderthalensis, and H. sapiens cannot be explained by the rate of craniodental and body size evolution. Together, our results indicate that the behaviorally driven adaptations of food processing (reduced feeding time and molar size) originated after the evolution of Homo but before or concurrent with the evolution of H. erectus, which was around 1.9 Mya.

The JPL Direct Methanol Liquid-feed PEM Fuel Cell

Science.gov (United States)

Halpert, G.; Surampudi, S.

1994-01-01

Recently, there has been a breakthrough in fuel cell technology in the Energy Storage Systems Group at the Jet Propulsion Laboratory with the develpment of a direct methanol, liquid-feed, solid polymer electrolyte membrane (PEM) fuel cell... The methanol liquid-feed, solid polymer electrolyte (PEM) design has numerous system level advantages over the gas-feed design. These include:...

Biogas feed analysis

OpenAIRE

Song, Yuan

2008-01-01

Biogas production is regarded as the best energy recovery process from wet organic solid wastes (WOSW). Feed composition, storage conditions and time will influence the compositions of feed to biogas processes. In this study, apple juice from Meierienes Juice factory was used as the model substrates to mimic the liquid phase that can be extracted from fruit or juice industry WOSW. A series of batch experiments were carried out with different initial feed concentrations (0, 1, 2, 5, 10 %) of a...

Delayed Development of Feeding Skills in Children with Feeding Difficulties—Cross-sectional Study in a Brazilian Reference Center

Directory of Open Access Journals (Sweden)

Cláudia C. Ramos

2017-10-01

Full Text Available BackgroundDelays in gross motor development, sensory processing issues, and organic and behavioral problems are known to interfere in the development of feeding skills (FS; and—therefore—in the success of the process of feeding a child. Children with feeding difficulties (FD commonly present inadequacy of FS.ObjectivesAssessment of five FS in Brazilian children with FD, and search of associations with types of FD.MethodsCross-sectional study with 70 children below 10 years old. Data were obtained from medical records: age, gender, age at texture transitions, feeding phase (breastfeeding, weaning to solids or full solids at first complaint; characteristics of the meal (duration, environment, and shared meals with adults, self-feeding practices, use of feeding equipment and bottle, mouthing, feeding position and FD diagnosis. Skills were categorized according to standards for age. Chi-Square, Anova Test (or non-parametric equivalent and Multinomial logistic regression tests were used, with a significance level of 5%.ResultsThere was no difference in FS (p > 0.05 or in the number of FS inadequateness (p = 0.84 according to FD diagnosis. The majority (94% of children presented at least one delayed development of FS; 1/3 presented delays in more than half of the FS. The most prevalent inadequacies in FS were inadequate feeding position (73.5%, prolonged bottle feeding (56.9%, and inadequate self-feeding practices (37.9%. Feeding complaints first appeared at 10.9 ± 11.4 months, and picky eating was the most prevalent type of FD (37.1%. Most children were fed in inadequate environments (55.2%, without the company of adults (78%. Transition to solid foods occurred at 16 ± 5.6 months. Multinomial logistic regression showed no difference in likelihood of presenting any type of FD compared to picky eating, according to FS. Age at texture transition both from breastfeeding to complementary feeding (p = 0.95, and from

Feeding Rate of Soil Animals in Different Ecosystems in Pati, Indonesia

Directory of Open Access Journals (Sweden)

RAHAYU WIDYASTUTI

2006-09-01

Full Text Available The feeding activity of soil animals was measured by using bait lamina test in three main ecosystems, i.e. the teak forest, home garden and rainfed paddy field. Two additional ecosystems in rainfed paddy field, i.e. the old (permanently established bund around paddy fields and new bunds were examined as well. Three blocks of bait-lamina sticks (each block consisting of 16 individual sticks were exposed at each location. The bait lamina were retrieved from the soil after two days and visually assessed. Each hole is designated as “fed” (perforated or “non-fed” hole. The feeding rate is measured as the absolute number of “fed” holes. Soil animals in the old bunds showed the highest feeding activity (55.20%, followed by home garden (39.10%, rainfed paddy field (16.50%, teak forest (15.60%, and new bund (7.80%. The frequency of animals attack to the bait strips also indicated the similar pattern as their feeding activity, i.e. high in the old bunds (0.90, followed by home garden (0.70, teak forest (0.40, new bunds (0.40 and rainfed paddy field (0.30, respectively.

Aluminum 6060-T6 friction stir welded butt joints: fatigue resistance with different tools and feed rates

International Nuclear Information System (INIS)

Baragetti, S.; D'Urso, G.

2014-01-01

The fatigue behavior of AA6060-T6 friction stir welded butt joints was investigated. The joints were produced by using both a standard and a threaded tri-flute cylindrical-tool with flat shoulder. The friction stir welding process was carried out using different feed rates. Preliminary tensile tests, micrograph analyses and hardness profile measurements across the welds were carried out. Welded and unwelded fatigue samples were tested under axial loading (R = 0.1) with upper limits of 10 4 and 10 5 cycles, using threaded and unthreaded (standard) tools at different feed rates. The best tensile and fatigue performance was obtained using the standard tool at low feed rate.

Feed chute geometry for minimum belt wear

Energy Technology Data Exchange (ETDEWEB)

Roberts, A W; Wiche, S J [University of Newcastle, Newcastle, NSW (Australia). Centre for Bulk Solids and Particulate Technologies

1998-09-01

The paper is concerned with the feeding and transfer of bulk solids in conveyor belt operation. The paper focuses on chute design where the objective is to prevent spillage and minimise both chute and belt wear. It is shown that these objectives may be met through correct dynamic design of the chute and by directing the flow of bulk solids onto the belt at an acceptable incidence angle. The aim is to match the tangential velocity component of the feed velocity as close as possible to the belt velocity. At the same time, it is necessary to limit the impact pressure due to the change in momentum of the bulk solid as it feeds onto the belt. 2 refs., 8 figs.

Monitoring catalyst flow rate in a FCC cold pilot unity by gamma ray transmission measurements

International Nuclear Information System (INIS)

Brito, Marcio F.P.; Netto, Wilson F.S.; Miranda, Marcia V.F.E.S.; Junior, Isacc A.S.; Dantas, Carlos C.; Melo, Silvio B.; Lima, Emerson A.O.

2013-01-01

A model for monitoring catalyst mass flow in riser of Fluid Catalytic Cracking - FCC, pilot unity as a function of air flow and solid injection is proposed. The fluidized FCC- catalyst bed system is investigated in an experimental setup the Cold Pilot Unity - CPU by means of gamma ray transmission measurements. Riser in CPU simulates the reactor in FCC process. By automation control air flow is instrumentally measured in riser and the solid injection is manually controlled by valve adjusting. Keeping a constant solid injection, catalyst level at the return column was measured by gamma transmission for several air flow values in riser. The operational condition reached a steady state regime before given to setup a new air flow value. A calibration of catalyst level as a function of air flow in riser is calculated, therefore, a model for solid feed rate is derived. Recent published work evaluates solid concentration in riser of the CPU by means of gamma ray transmission, and a correlation with air velocity is obtained. In this work, the model for solid feed rate was further investigated by carrying out experiments to measure catalyst concentration at the same air flow values. These experiments lead to a model for monitoring catalyst flow in riser as function of solid feed rate and air flow. Simulation with random numbers produced with Matlab software allows to define validation criteria for the model parameters. (author)

Determination of caffeoylquinic acids in feed and related products by focused ultrasound solid-liquid extraction and ultra-high performance liquid chromatography-mass spectrometry.

Science.gov (United States)

Tena, M T; Martínez-Moral, M P; Cardozo, P W

2015-06-26

A method to determine caffeoylquinic acids (CQAs) in three sources (herbal extract, feed additive and finished feed) using for the first time focused ultrasound solid-liquid extraction (FUSLE) followed by ultra-high performance liquid chromatography (UPLC) coupled to quadrupole-time of flight mass spectrometry is presented. Pressurized liquid extraction (PLE) was also tested as extraction technique but it was discarded because cynarin was not stable under temperature values used in PLE. The separation of the CQAs isomers was carried out in only seven minutes. FUSLE variables such as extraction solvent, power and time were optimized by a central composite design. Under optimal conditions, FUSLE extraction was performed with 8mL of an 83:17 methanol-water mixture for 30s at a power of 60%. Only two extraction steps were found necessary to recover analytes quantitatively. Sensitivity, linearity, accuracy and precision were established. Matrix effect was studied for each type of sample. It was not detected for mono-CQAs, whereas the cynarin signal was strongly decreased due to ionization suppression in presence of matrix components; so the quantification by standard addition was mandatory for the determination of di-caffeoylquinic acids. Finally, the method was applied to the analysis of herbal extracts, feed additives and finished feed. In all samples, chlorogenic acid was the predominant CQA, followed by criptochlorogenic acid, neochlorogenic acid and cynarin. The method allows an efficient determination of chlorogenic acid with good recovery rates. Therefore, it may be used for screening of raw material and for process and quality control in feed manufacture. Copyright © 2015 Elsevier B.V. All rights reserved.

Exclusive breastfeeding rate and factors associated with infant feeding practices in Indonesia

Directory of Open Access Journals (Sweden)

Yovita Ananta

2016-05-01

Full Text Available Background Breast milk is the ideal food for infants. According to the 2007 Indonesian National Household Health Survey, only 23% of mothers exclusively breastfeed for six months. Objectives To determine the rate of exclusive breastfeeding in Indonesia, to evaluate factors associated with infant feeding practices, and to compare the nutritional and developmental status between exclusively-breastfed and formula-fed infants. Methods A survey was conducted in hospitals located in 17 provinces in Indonesia. The rate of exclusive breastfeeding was calculated. Many variables were investigated as potential predictors for exclusive breastfeeding using a multivariable logistic regression analysis. Further analysis was performed to compare the nutritional and developmental status between exclusively breastfed and formula-fed infants at the time of survey. Results From 1,804 infant subjects, the overall rate of exclusive breastfeeding was 46.3%, ranging from 10.5% in East Java to 66.9% in Jambi. Predominant breastfeeding, complementary feeding, and formula feeding rates were 14.3%, 8.6%, and 30.7%, respectively. Maternal unemployment was associated with a longer duration of breastfeeding (P=0.000. There were significantly more formula-fed infants who were undernourished compared to exclusively-breastfed infants (14% vs. 8%, P=0.001. There were also significantly more infants in the formula-fed group who had abnormal head circumference compared to those in the exclusively-breastfed group (9% vs. 6%, P=0.031. Child development, as assessed by the Pre-screening Developmental Questionnaire, was similar between the two groups (P=0.996. Conclusion The overall rate of exclusive breastfeeding in Indonesia is 46.3%. Maternal unemployment is associated with longer duration of breastfeeding. Exclusive breastfed infants have significant better growth and head circumference compared to formula fed infants, while the development is similar between the two groups.

Low nitrous oxide production through nitrifier-denitrification in intermittent-feed high-rate nitritation reactors.

Science.gov (United States)

Su, Qingxian; Ma, Chun; Domingo-Félez, Carlos; Kiil, Anne Sofie; Thamdrup, Bo; Jensen, Marlene Mark; Smets, Barth F

2017-10-15

Nitrous oxide (N 2 O) production from autotrophic nitrogen conversion processes, especially nitritation systems, can be significant, requires understanding and calls for mitigation. In this study, the rates and pathways of N 2 O production were quantified in two lab-scale sequencing batch reactors operated with intermittent feeding and demonstrating long-term and high-rate nitritation. The resulting reactor biomass was highly enriched in ammonia-oxidizing bacteria, and converted ∼93 ± 14% of the oxidized ammonium to nitrite. The low DO set-point combined with intermittent feeding was sufficient to maintain high nitritation efficiency and high nitritation rates at 20-26 °C over a period of ∼300 days. Even at the high nitritation efficiencies, net N 2 O production was low (∼2% of the oxidized ammonium). Net N 2 O production rates transiently increased with a rise in pH after each feeding, suggesting a potential effect of pH on N 2 O production. In situ application of 15 N labeled substrates revealed nitrifier denitrification as the dominant pathway of N 2 O production. Our study highlights operational conditions that minimize N 2 O emission from two-stage autotrophic nitrogen removal systems. Copyright © 2017 Elsevier Ltd. All rights reserved.

Sample Results from MCU Solids Outage

Energy Technology Data Exchange (ETDEWEB)

Peters, T.; Washington, A.; Oji, L.; Coleman, C.; Poirier, M.

2014-09-22

Savannah River National Laboratory (SRNL) has received several solid and liquid samples from MCU in an effort to understand and recover from the system outage starting on April 6, 2014. SRNL concludes that the presence of solids in the Salt Solution Feed Tank (SSFT) is the likely root cause for the outage, based upon the following discoveries: A solids sample from the extraction contactor #1 proved to be mostly sodium oxalate; A solids sample from the scrub contactor#1 proved to be mostly sodium oxalate; A solids sample from the Salt Solution Feed Tank (SSFT) proved to be mostly sodium oxalate; An archived sample from Tank 49H taken last year was shown to contain a fine precipitate of sodium oxalate; A solids sample from ; A liquid sample from the SSFT was shown to have elevated levels of oxalate anion compared to the expected concentration in the feed. Visual inspection of the SSFT indicated the presence of precipitated or transferred solids, which were likely also in the Salt Solution Receipt Tank (SSRT). The presence of the solids coupled with agitation performed to maintain feed temperature resulted in oxalate solids migration through the MCU system and caused hydraulic issues that resulted in unplanned phase carryover from the extraction into the scrub, and ultimately the strip contactors. Not only did this carryover result in the Strip Effluent (SE) being pushed out of waste acceptance specification, but it resulted in the deposition of solids into several of the contactors. At the same time, extensive deposits of aluminosilicates were found in the drain tube in the extraction contactor #1. However it is not known at this time how the aluminosilicate solids are related to the oxalate solids. The solids were successfully cleaned out of the MCU system. However, future consideration must be given to the exclusion of oxalate solids into the MCU system. There were 53 recommendations for improving operations recently identified. Some additional considerations or

Wildlife Contact Rates at Artificial Feeding Sites in Texas

Science.gov (United States)

Campbell, Tyler A.; Long, David B.; Shriner, Susan A.

2013-06-01

Given the popularity of feeding white-tailed deer ( Odocoileus virginianus) in Texas and the increasing amount of corn that is distributed, more information is needed on the impacts of this activity on non-target wildlife. Our objectives were to report visitation, intra- and interspecific contact, and contact rates of wildlife at artificial feeding sites in Texas. Our study was conducted at three sites in Kleberg and Nueces counties, Texas. We trapped animals from February to April and August to September, 2009 and marked animals with passive integrated transponder (PIT) tags. At each site and season, we placed one feeder system containing a PIT tag reader within 600 m of trap locations. Readers detected PIT tags from a distance of 25 cm. We determined a contact event to occur when two different PIT tags were detected by feeder systems within 5 s. We recorded 62,719 passes by raccoons ( Procyon lotor), 103,512 passes by collared peccaries ( Pecari tajacu), 2,923 passes by feral swine ( Sus scrofa), 1,336 passes by fox squirrels ( Sciurus niger), and no passes by opossums ( Didelphis virginiana) at feeder systems. For site-season combinations in which contact events occurred, we found intraspecific contact rates (contacts per day) for raccoons, collared peccaries, and feral swine to be 0.81-124.77, 0.69-38.08, and 0.0-0.66, respectively. Throughout our study we distributed ~2,625 kg of whole kernel corn, which resulted in 6,351 contact events between marked wildlife (2.4 contacts per kg of corn). If 136 million kg of corn is distributed in Texas annually, we would expect >5.2 billion unnatural contact events between wildlife would result from this activity each year in Texas. Consequently, we do not believe that it is wise for natural resource managers to maintain artificial feeding sites for white-tailed deer or other wildlife due to pathogen transmission risks.

The effects of increasing amounts of milk replacer powder added to whole milk on passage rate, nutrient digestibility, ruminal development, and body composition in dairy calves.

Science.gov (United States)

Azevedo, R A; Machado, F S; Campos, M M; Lopes, D R G; Costa, S F; Mantovani, H C; Lopes, F C F; Marcondes, M I; Pereira, L G R; Tomich, T R; Coelho, S G

2016-11-01

The aim of this study was to evaluate the effects on feed intake, calf performance, feed efficiency, fecal score, passage rate, apparent nutrient digestibility, development of rumen and other organs, and body composition of increasing the total solids content of liquid feed (whole milk) by adding increasing amounts of milk replacer powder during the preweaning period. Crossbred Holstein-Gyr calves (n=32) were assigned to 1 of 4 treatments (n=8 per group), which consisted of different total solids concentrations: 12.5, 15.0, 17.5, and 20.0% of liquid feed. Calves received 6 L of liquid per day, divided into 2 equal meals (0800 and 1600 h) and provided in buckets, from 5 to 55d of age. Starter and water were provided ad libitum during the entire experiment. At 56d of age, animals were killed. Laboratory analysis determined that the actual total solids contents of the liquid feed were 13.5, 16.1, 18.2, and 20.4%, for the proposed 12.5, 15.0, 17.5, and 20.0% total solids treatments, respectively. The osmolality of liquid feed treatments was 265 to 533 mOsm/L. Fecal score was similar among treatments, except for wk 2 and 7. Intake of liquid feed was similar among treatments from 6wk of age. During wk 4, 5, and 6, we detected a linear decrease in starter intake. After wk 7, we observed greater starter intake for calves fed approximately 16.1% total solids. Water intake, feed efficiency, and withers height were similar among treatments. Increasing concentrations of total solids in liquid feed quadratically affected average daily gain, final body weight, and empty body weight. We observed a greater average daily gain for calves fed approximately 20.4% total solids. Passage rate, nutrient digestibility, development of pre-stomachs and intestine, and body composition were similar among treatments. Increasing the concentration of total solids in liquid feed up to 20.4% reduced starter intake between 4 and 6wk of life, but increased average daily gain. It did not affect

Feeding rates affect stress and non-specific immune responses of juvenile blunt snout bream Megalobrama amblycephala subjected to hypoxia.

Science.gov (United States)

Li, Xiang-Fei; Xu, Chao; Tian, Hong-Yan; Jiang, Guang-Zhen; Zhang, Ding-Dong; Liu, Wen-Bin

2016-02-01

This study aimed to investigate the effects of feeding rates on stress response, innate immunity and hypoxia resistance of juvenile blunt snout bream Megalobrama amblycephala. Fish were randomly assigned to one of six feeding rates (2, 3, 4, 5, 6 and 7% of body weight/day) for 60 days. Then, fish were subjected to hypoxic conditions and haemato-immunological parameters were analyzed pre- and post-challenge. Low feed ration resulted in decreased liver superoxide dismutase and catalase activities and reduced glutathione contents. Inadequate feeding also adversely affected the immune functions of fish, as was characterized by the relatively low haemato-immunological parameters (including alternative complement (ACH50), myeloperoxidase (MPO), plasma protein profiles and transferring) and high hypoxia-induced mortality. High feed ration did not lead to the improvement in antioxidant capability, immune responses and survival. In addition, plasma cortisol, glucose and transferrin levels as well as lysozyme activities all increased significantly after hypoxia challenge, whereas the opposite was true for plasma ACH50 and MPO activities as well as protein profiles in terms of hypoxia challenge. An interaction between feeding rate and hypoxia was also observed in plasma cortisol, glucose and protein profiles. In conclusion, a feeding rate of 4-5% of body weight/day is optimal to boost the innate immunity of juvenile blunt snout bream. Low ration resulted in decreased antioxidant capability, compromised immune functions and reduced hypoxia resistance, while over feeding did not benefit the health status. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development of strand burner for solid propellant burning rate studies

International Nuclear Information System (INIS)

Aziz, A; Mamat, R; Ali, W K Wan

2013-01-01

It is well-known that a strand burner is an apparatus that provides burning rate measurements of a solid propellant at an elevated pressure in order to obtain the burning characteristics of a propellant. This paper describes the facilities developed by author that was used in his studies. The burning rate characteristics of solid propellant have be evaluated over five different chamber pressures ranging from 1 atm to 31 atm using a strand burner. The strand burner has a mounting stand that allows the propellant strand to be mounted vertically. The strand was ignited electrically using hot wire, and the burning time was recorded by electronic timer. Wire technique was used to measure the burning rate. Preliminary results from these techniques are presented. This study shows that the strand burner can be used on propellant strands to obtain accurate low pressure burning rate data

Feeding habits and comparative feeding rates of three southern ...

African Journals Online (AJOL)

Food utilization by three arboreal squirrels was studied with regard to feeding habits and efficiency, food preferences and chemical analyses of the food. Food selected in the field by the two forest subspecies the Ngoye red squirrel Paraxerus palliatus ornatus and the Tonga red squirrel, P. p. tongensis are listed.

Feeding patterns and diet - children 6 months to 2 years

Science.gov (United States)

Feeding children 6 months to 2 years; Diet - age appropriate - children 6 months to 2 years; Babies - feeding solid food ... per day, but will eat more at each feeding than the first 6 months. If you feed ...

Influence of methanol/sorbitol co-feeding rate on pAOX1 induction in a Pichia pastoris Mut+ strain in bioreactor with limited oxygen transfer rate.

Science.gov (United States)

Carly, F; Niu, H; Delvigne, F; Fickers, P

2016-04-01

High Pichia pastoris biomass density could be obtained using high co-feeding rate of methanol and sorbitol in a fed-batch or continuous culture, while further higher feeding rate finally leads to oxygen limitation in bioreactor. In the literature, there is lack of report about AOX1 promoter regulation with regard to dissolved oxygen level (DO). Therefore, in this work, chemostat cultures were performed to investigate the cell growth, metabolism and regulation of the AOX1 promoter (pAOX1) regarding co-feeding rate of optimized methanol/sorbitol mixture (methanol fraction 0.60 C-mol/C-mol) using a P. pastoris Mut+/pAOX1-lacZ strain. The oxygen transfer rates (OTR) in bioreactor were kept in the range of typical values of large bioreactor, i.e., 4-8 g/(L h) if DO equals 30 % saturation or 5-10 g/(L h) if DO nears zero. For DO >0, an increase of the carbon fed led to an increase of pAOX1 induction. By contrast, when dissolved oxygen was completely depleted, methanol accumulated, causing a 30 % decrease of pAOX1 induction. However, this decrease is more likely to be lined to methanol accumulation than to low level of dissolved oxygen (sorbitol co-feeding allowed cells to adapt to oxygen transient limitations that often occur at industrial scale with reduced effect on pAOX1 induction. The optimal feeding rate tested here was 6.6 mmol C (DCW h)(-1) at an OTR of 8.28 g O2(L h)(-1) with over fivefold pAOX1 induction (probably directly associated with target protein productivity) compared with previous work.

Improvement of specific growth rate of Pichia pastoris for effective porcine interferon-α production with an on-line model-based glycerol feeding strategy.

Science.gov (United States)

Gao, Min-Jie; Zheng, Zhi-Yong; Wu, Jian-Rong; Dong, Shi-Juan; Li, Zhen; Jin, Hu; Zhan, Xiao-Bei; Lin, Chi-Chung

2012-02-01

Effective expression of porcine interferon-α (pIFN-α) with recombinant Pichia pastoris was conducted in a bench-scale fermentor. The influence of the glycerol feeding strategy on the specific growth rate and protein production was investigated. The traditional DO-stat feeding strategy led to very low cell growth rate resulting in low dry cell weight (DCW) of about 90 g/L during the subsequent induction phase. The previously reported Artificial Neural Network Pattern Recognition (ANNPR) model-based glycerol feeding strategy improved the cell density to 120 g DCW/L, while the specific growth rate decreased from 0.15 to 0.18 to 0.03-0.08 h(-1) during the last 10 h of the glycerol feeding stage leading to a variation of the porcine interferon-α production, as the glycerol feeding scheme had a significant effect on the induction phase. This problem was resolved by an improved ANNPR model-based feeding strategy to maintain the specific growth rate above 0.11 h(-1). With this feeding strategy, the pIFN-α concentration reached a level of 1.43 g/L, more than 1.5-fold higher than that obtained with the previously adopted feeding strategy. Our results showed that increasing the specific growth rate favored the target protein production and the glycerol feeding methods directly influenced the induction stage. Consequently, higher cell density and specific growth rate as well as effective porcine interferon-α production have been achieved by our novel glycerol feeding strategy.

Feeding Your Baby

Medline Plus

Full Text Available ... bond with her. Breast milk is the best food for your baby during the first year of ... feeding safe. And then get ready for solid foods ! In This Topic Breastfeeding help Breastfeeding is best ...

Feeding Your Baby

Medline Plus

Full Text Available ... then get ready for solid foods ! In This Topic Breastfeeding help Breastfeeding is best Food allergies and ... breast pump Baby Feeding your baby Other Baby topics ') document.write(' Caring for your baby ') document.write('') } ') ...

Feed gas contaminant removal in ion transport membrane systems

Science.gov (United States)

Carolan, Michael Francis [Allentown, PA; Miller, Christopher Francis [Macungie, PA

2008-09-16

Method for gas purification comprising (a) obtaining a feed gas stream containing one or more contaminants selected from the group consisting of volatile metal oxy-hydroxides, volatile metal oxides, and volatile silicon hydroxide; (b) contacting the feed gas stream with a reactive solid material in a guard bed and reacting at least a portion of the contaminants with the reactive solid material to form a solid reaction product in the guard bed; and (c) withdrawing from the guard bed a purified gas stream.

Feeding Your 1- to 3-Month-Old

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Feeding Your 1- to 3-Month-Old KidsHealth / For ... and solid foods aren't usually necessary. Formula Feeding: How Much and How Often? Babies digest formula ...

Thermophilic co-digestion feasibility of distillers grains and swine manure: effect of C/N ratio and organic loading rate during high solid anaerobic digestion (HSAD).

Science.gov (United States)

Sensai, P; Thangamani, A; Visvanathan, C

2014-01-01

Anaerobic co-digestion of high solids containing distillers grains and swine manure (total solids, 27 +/- 2% and 18 +/- 2%, respectively) was evaluated in this study to assess the effect of C/N ratio and organic loading rate (OLR). Feed mixture was balanced to achieve a C/N ratio of 30/1 by mixing distillers grains and swine manure. Pilot-scale co-digestion of distillers grains and swine manure was carried out under thermophilic conditions in the continuous mode for seven different OLRs from R1 to R7 (3.5, 5, 6, 8, 10, 12 and 14 kg VS/m3 day) under high solid anaerobic digestion. The methane yield and volatile solid (VS) removal were consistent; ranging from 0.33 to 0.34 m3CH4/kg VS day and 50-53%, respectively, until OLR 8 kg VS/m3 day. After which methane yield and VS removal significantly decreased to 0.26 m3 CH4/kg VS day and 42%, respectively, when OLR was increased to 14 kg VS/m3 day. However, during operation, at OLR of 10 kg VS/m3 day, the methane yield and VS removal increased after the 19th day to 0.33 m3 CH4/kg VS day and 46%, respectively, indicating that a longer acclimatization period is required by methanogens at a higher loading rate.

Turnover rate of hypoxic cells in solid tumors

International Nuclear Information System (INIS)

Ljungkvist, A.S.E.; Bussink, J.; Rijken, P.F.J.W.; Van Der Kogel, A.J.

2003-01-01

Most solid tumors contain hypoxic cells, and both the amount and duration of tumor hypoxia has been shown to influence the effect of radiation treatment negatively. It is important to understand the dynamic processes within the hypoxic cell population in non-treated tumors, and the effect of different treatment modalities on the kinetics of hypoxic cells to be able to design optimal combined modality treatments. The turnover rate of hypoxic cells was analyzed in three different solid tumor models with a double bio-reductive hypoxic marker assay with sequential injection of the two hypoxic markers. Previously it was shown that this assay could be used to detect both a decrease and an increase of tumor hypoxia in relation to the tumor vasculature with high spatial resolution. In this study the first hypoxic marker, pimonidazole, was administered at variable times relative to tumor harvest, and the second hypoxic marker, CCI-103F, was injected at a fixed time before harvest. The hypoxic cell turnover rate was calculated as the loss of pimonidazole positive cells relative to CCI-103F. The murine C38 line had the fastest hypoxic turnover rate of 60% /24h and the human xenograft line SCCNij3 had the slowest hypoxic turnover rate of 30% /24 h. The hypoxic turnover rate was most heterogeneous in the SCCNij3 line that even contained viable groups of cells that had been hypoxic for at least 5 days. The human xenograft line MEC82 fell in between with a hypoxic turnover rate of 50% /24 h. The hypoxic cell turnover was related to the potential tumor volume doubling time (Tpot) with a Tpot of 26h in C38 and 103h in SCCNij3. The dynamics of hypoxic cells, quantified with a double hypoxic marker method, showed large differences in hypoxic cell turnover rate and were related to Tpot

Density and temperature dependent feeding rates in an established and an alien freshwater gammarid fed on chironomid larvae

Directory of Open Access Journals (Sweden)

Dieter WALOSZEK

2011-02-01

Full Text Available We compared feeding rates of the well-established, non-invasive amphipod Gammarus roeselii with those of the invasive Dikerogammarus villosus at different prey densities and different temperatures in laboratory experiments using chironomid larvae as prey. Feeding rates were very variable in both species but higher in the invader species than in the well-established non-invasive species. These results were age independent. At high temperature (18-20 °C and high prey density (≥1000 prey m-2 one large adult D. villosus consumed 6-9 prey day-1 on average while one G. roeselii consumed 4-7 prey d-1 and one smaller D. villosus of a length of 8-10 mm consumed 2-5 prey d-1 while one G. roeselii of the same length consumed 3 prey d-1. Predation rate decreased considerably from high (18-20 °C to low temperature (3±2 °C, from 9 to 4 prey predator-1 d-1 in D. villosus and from 7.5 to 2.5 prey predator-1 d-1 in G. roeselii. We conclude that both gammarids consumed a biomass in the range of 1/2 to 1/3 to their own biomass and that low predation/feeding rate at low temperature could be a reason why, in some places, indigenous gammarids can re-colonize their former habitats for a short period of time in cold winter and early spring in spite of the presence of the invasive. We further conclude that differences in weight between the species in particular in the experiments with adults can have influenced feeding rates; possibly differences in weight- specific feeding rates are small.

[*C]octanoic acid breath test to measure gastric emptying rate of solids.

Science.gov (United States)

Maes, B D; Ghoos, Y F; Rutgeerts, P J; Hiele, M I; Geypens, B; Vantrappen, G

1994-12-01

We have developed a breath test to measure solid gastric emptying using a standardized scrambled egg test meal (250 kcal) labeled with [14C]octanoic acid or [13C]octanoic acid. In vitro incubation studies showed that octanoic acid is a reliable marker of the solid phase. The breath test was validated in 36 subjects by simultaneous radioscintigraphic and breath test measurements. Nine healthy volunteers were studied after intravenous administration of 200 mg erythromycin and peroral administration of 30 mg propantheline, respectively. Erythromycin significantly enhanced gastric emptying, while propantheline significantly reduced gastric emptying rates. We conclude that the [*C]octanoic breath test is a promising and reliable test for measuring the gastric emptying rate of solids.

High-Pressure Burning Rate Studies of Solid Rocket Propellants

Science.gov (United States)

2013-01-01

monopropellant burning rate. The self-de§agration rates of neat AP are plotted in Fig. 2 for both pressed pellets and single crystals. There is agreement...rate data from various investigators: 1 ¡ [2]; pressed pellets : 2 ¡ [3], 3 ¡ [4], and 4 ¡ [2]; and single crystals: 5 ¡ [5], and 6 ¡ [6]. Line ¡ AP...7]. Strand or window burners have had more use in the solid propellant community. There are numerous types and styles of combustion vessels, but they

[Improving the feed conversion rate in the pig fattening industry by optimising hygienic management].

Science.gov (United States)

Riedl, Antonia M; Völkel, Inger; Schlindwein, Bernhard; Czerny, Claus-Peter

2013-01-01

Considering continuously increasing forage costs, the feed conversion rate has a major impact on the economic efficiency in hog fattening. The influence of hygienic management strategies on animal health and feed efficiency was evaluated by an online-study comprising animal health management data of 202 German pig fatteners. Data analysis included a simple comparison of averages, a linear regression analysis, and a cluster analysis. Due to geographical distribution and size of premises, the random sample was not representative but yielded in significant results. The total impact of hygienic management on feed conversion was calculated to be 23.9 %. Professional performance of rodent control (beta = 0.357; p conversion ranged from Euro 1.15 to and Euro 2.53 per pig. Likewise optimized growth performance as a result of improved hygienic management could partly compensate increasing feed costs. The results of this online-study reveal the need to establish reliable HACCP systems on farm level.

Feed delivery method affects the learning of feeding and competitive behavior in dairy heifers.

Science.gov (United States)

Greter, A M; Leslie, K E; Mason, G J; McBride, B W; DeVries, T J

2010-08-01

The objective of this study was to determine how different feeding methods may affect the learning of feeding, sorting, and competitive behavior of growing dairy heifers. We hypothesized that heifers previously fed a total mixed ration (TMR) would distribute their feeding time more evenly throughout the day, sort the new ration less, compete less for feed, maintain a more solid fecal consistency, and continue to grow rapidly compared with heifers previously fed a top-dressed ration (TDR). Thirty-two Holstein heifers (237.2+/-21.9 d of age) were divided into 8 groups of 4 and exposed to 1 of 2 treatments for 13 wk: 1) TMR or 2) TDR, with each containing 65% grass/alfalfa haylage and 35% textured concentrate on a dry matter (DM) basis. Following this feeding period, all heifers were switched to an unfamiliar TMR containing 56.1% grass/alfalfa haylage, 21.0% corn silage, 21.0% high-moisture corn, and 1.9% mineral supplement (DM basis) for 7 wk. Group DM intakes were recorded daily throughout the experiment. Feeding behavior, recorded using time-lapse video, and sorting behavior were measured for 7 d during wk 1, 4, and 7 after the dietary change. Feeding competition was measured on d 2, 4, and 6 of each recording week. Sorting activity was determined through particle size analysis of the fresh feed and orts. The particle size separator separated feed into 4 fractions (long, medium, short, and fine). Sorting of each fraction was calculated as actual intake expressed as a percentage of predicted intake. Animals were scored for fecal consistency twice weekly, using a scale from 1 (liquid) to 4 (solid). Heifers were weighed every 2 wk. Neither DM intake (9.0 kg/d) nor average daily gain (1.2 kg/d) differed between treatments. Sorting also did not differ between treatments. Heifers tended to spend more time feeding if they had previously been fed a TDR (198.8 vs. 186.8 min/d). As they had done before the dietary change, heifers previously fed the TDR spent more time at the

Increasing FSW join strength by optimizing feed rate, rotating speed and pin angle

Science.gov (United States)

Darmadi, Djarot B.; Purnowidodo, Anindito; Siswanto, Eko

2017-10-01

Principally the join in Friction Stir Welding (FSW) is formed due to mechanical bonding. At least there are two factors determines the quality of this join, first is the temperature in the area around the interface and secondly the intense of mixing forces in nugget zone to create the mechanical bonding. The adequate temperature creates good flowability of the nugget zone and an intensive mixing force produces homogeneous strong bonding. Based on those two factors in this research the effects of feed rate, rotating speed and pin angle of the FSW process to the tensile strength of resulted join are studied. The true experimental method was used. Feed rate was varied at 24, 42, 55 and 74 mm/minutes and from the experimental results, it can be concluded that the higher feed rate decreases the tensile strength of weld join and it is believed due to the lower heat embedded in the material. Inversely, the higher rotating speed increases the join’s tensile strength as a result of higher heat embedded in base metal and higher mixing force in the nugget zone. The rotating speed were 1842, 2257 and 2904 RPMs. The pin angle determines the direction of mixing force. With variation of pin angle: 0°, 4°, 8° and 12° the higher pin angle generally increases the tensile strength because of more intensive mixing force. For 12° pin angle the lower tensile strength is found since the force tends to push out the nugget area from the joint gap.

Numerical and experimental study of a solid pellet feed continuous Czochralski growth process for silicon single crystals

Science.gov (United States)

Anselmo, A.; Prasad, V.; Koziol, J.; Gupta, K. P.

1993-07-01

A polysilicon pellets (≅1 mm diameter) feed continuous Czochralski (CCZ) growth process for silicon single crystals is proposed and investigated. Experiments in an industrial puller (14-18 inch diameter crucible) successfully demonstrate the feasibility of this process. The advantages of the proposed scheme are: a steady state growth process, a low aspect ratio melt, uniformity of heat addition and a growth apparatus with single crucible and no baffle(s). The addition of dopant with the solid charge will allow a better control of oxygen concentration leading to crystals of uniform properties and better quality. This paper presents theoretical results on melting of fully and partially immersed silicon spheres and numerical solutions on temperature and flow fields in low aspect ration melts with and without the addition of solid pellets. The theoretical and experimental results obtained thus far show a great promise for the proposed scheme.

Foraging response and acclimation of ambush feeding and feeding-current feeding copepods to toxic dinoflagellates

DEFF Research Database (Denmark)

Xu, Jiayi; Nielsen, Lasse Tor; Kiørboe, Thomas

2018-01-01

reticulatum. We hypothesize (1) that ambush feeders are less affected by toxic algae than feeding-current feeders, (2) that copepods acclimate to the toxic algae, and (3) that phytoplankton cells previously exposed to copepod cues elicit stronger responses. Both copepod species consumed the toxic algae...... to examine the response and temporal acclimation (5 d) of two copepods with different foraging behaviors to toxic dinoflagellates. Feeding-current feeding Temora longicornis and ambush feeding Acartia tonsa were offered three strains of toxic Alexandrium tamarense and a nontoxic control Protoceratium...... at a reduced rate and there was no difference in their net-response, but the mechanisms differed. T. longicornis responded in strain-specific ways by reducing its feeding activity, by rejecting captured algae, or by regurgitating consumed cells. A. tonsa reduced its consumption rate, jump frequency, and jump...

Effect of Feed Gas Flow Rate on CO2 Absorption through Super Hydrophobic Hollow Fiber membrane Contactor

Science.gov (United States)

Kartohardjono, Sutrasno; Alexander, Kevin; Larasati, Annisa; Sihombing, Ivander Christian

2018-03-01

Carbon dioxide is pollutant in natural gas that could reduce the heating value of the natural gas and cause problem in transportation due to corrosive to the pipeline. This study aims to evaluate the effects of feed gas flow rate on CO2 absorption through super hydrophobic hollow fiber contactor. Polyethyleneglycol-300 (PEG-300) solution was used as absorbent in this study, whilst the feed gas used in the experiment was a mixture of 30% CO2 and 70% CH4. There are three super hydrophobic hollow fiber contactors sized 6 cm and 25 cm in diameter and length used in this study, which consists of 1000, 3000 and 5000 fibers, respectively. The super hydrophobic fiber membrane used is polypropylene-based with outer and inner diameter of about 525 and 235 μm, respectively. In the experiments, the feed gas was sent through the shell side of the membrane contactor, whilst the absorbent solution was pumped through the lumen fibers. The experimental results showed that the mass transfer coefficient, flux, absorption efficiency for CO2-N2 system and CO2 loading increased with the feed gas flow rate, but the absorption efficiency for CO2-N2 system decreased. The mass transfer coefficient and the flux, at the same feed gas flow rate, decreased with the number of fibers in the membrane contactor, but the CO2 absorption efficiency and the CO2 loading increased.

Effects of Karenia brevis on clearance rates and bioaccumulation of brevetoxins in benthic suspension feeding invertebrates.

Science.gov (United States)

Echevarria, Michael; Naar, Jerome P; Tomas, Carmelo; Pawlik, Joseph R

2012-01-15

Blooms of the toxic alga Karenia brevis occur along coastlines where sessile suspension feeding invertebrates are common components of benthic communities. We studied the effects of K. brevis on four benthic suspension feeding invertebrates common to the coast of the SE United States: the sponge Haliclona tubifera, the bryozoan Bugula neritina, the bivalve Mercenaria mercenaria, and the tunicate Styela plicata. In controlled laboratory experiments, we determined the rate at which K. brevis was cleared from the seawater by these invertebrates, the effect of K. brevis on clearance rates of a non-toxic phytoplankton species, Rhodomonas sp., and the extent to which brevetoxins bioaccumulated in tissues of invertebrates using an enzyme-linked immunosorbent assay (ELISA). All four invertebrate species cleared significant quantities of K. brevis from seawater, with mean clearance rates ranging from 2.27 to 6.71 L g h⁻¹ for H. tubifera and S. plicata, respectively. In the presence of K. brevis, clearance rates of Rhodomonas sp. by B. neritina and S. plicata were depressed by 75% and 69%, respectively, while clearance rates by H. tubifera and M. mercenaria were unaffected. Negative effects of K. brevis were impermanent; after a recovery period of 13 h, B. neritina and S. plicata regained normal clearance rates. All four invertebrates accumulated high concentrations of brevetoxin after a 4h exposure to K. brevis, but when animals were transferred to filtered seawater for 15 h after exposure, brevetoxin concentrations in the tissues of H. tubifera and B. neritina decreased by ∼80%, while there was no change in toxin concentration in the tissues of S. plicata and M. mercenaria. High cell concentrations of K. brevis may cause a suppression of clearance rates in benthic suspension feeding invertebrates, resulting in a positive feedback for bloom formation. Also, high concentrations of toxin may accumulate in the tissues of benthic suspension feeding invertebrates that may

Model-based optimization and scale-up of multi-feed simultaneous saccharification and co-fermentation of steam pre-treated lignocellulose enables high gravity ethanol production.

Science.gov (United States)

Wang, Ruifei; Unrean, Pornkamol; Franzén, Carl Johan

2016-01-01

High content of water-insoluble solids (WIS) is required for simultaneous saccharification and co-fermentation (SSCF) operations to reach the high ethanol concentrations that meet the techno-economic requirements of industrial-scale production. The fundamental challenges of such processes are related to the high viscosity and inhibitor contents of the medium. Poor mass transfer and inhibition of the yeast lead to decreased ethanol yield, titre and productivity. In the present work, high-solid SSCF of pre-treated wheat straw was carried out by multi-feed SSCF which is a fed-batch process with additions of substrate, enzymes and cells, integrated with yeast propagation and adaptation on the pre-treatment liquor. The combined feeding strategies were systematically compared and optimized using experiments and simulations. For high-solid SSCF process of SO2-catalyzed steam pre-treated wheat straw, the boosted solubilisation of WIS achieved by having all enzyme loaded at the beginning of the process is crucial for increased rates of both enzymatic hydrolysis and SSCF. A kinetic model was adapted to simulate the release of sugars during separate hydrolysis as well as during SSCF. Feeding of solid substrate to reach the instantaneous WIS content of 13 % (w/w) was carried out when 60 % of the cellulose was hydrolysed, according to simulation results. With this approach, accumulated WIS additions reached more than 20 % (w/w) without encountering mixing problems in a standard bioreactor. Feeding fresh cells to the SSCF reactor maintained the fermentation activity, which otherwise ceased when the ethanol concentration reached 40-45 g L(-1). In lab scale, the optimized multi-feed SSCF produced 57 g L(-1) ethanol in 72 h. The process was reproducible and resulted in 52 g L(-1) ethanol in 10 m(3) scale at the SP Biorefinery Demo Plant. SSCF of WIS content up to 22 % (w/w) is reproducible and scalable with the multi-feed SSCF configuration and model-aided process

Saponification pretreatment and solids recirculation as a new anaerobic process for the treatment of slaughterhouse waste.

Science.gov (United States)

Affes, R; Palatsi, J; Flotats, X; Carrère, H; Steyer, J P; Battimelli, A

2013-03-01

Different configurations of anaerobic process, adapted to the treatment of solid slaughterhouse fatty waste, were proposed and evaluated in this study. The tested configurations are based on the combination of anaerobic digestion with/without waste saponification pretreatment (70 °C during 60 min) and with/without recirculation of the digestate solid fraction (ratio=20% w/w). After an acclimation period of substrate pulses-feeding cycles, the reactors were operated in a semi-continuous feeding mode, increasing organic loading rates along experimental time. The degradation of the raw substrate was shown to be the bottleneck of the whole process, obtaining the best performance and process yields in the reactor equipped with waste pretreatment and solids recirculation. Saponification promoted the emulsification and bioavailability of solid fatty residues, while recirculation of solids minimized the substrate/biomass wash-out and induced microbial adaptation to the treatment of fatty substrates. Copyright © 2013 Elsevier Ltd. All rights reserved.

FEEDING PRACTICES, NUTRITIONAL STATUS AND ANEMIA IN YOUNG CHILDREN

OpenAIRE

Sathish Kumar; Ankitha; Udayamaliny

2015-01-01

BACKGROUND : WHO RECOMMENDS : I nitiation of breastfeeding within the first hour of life, exclusive breast feeding on demand for six months, followed by sequential addition of semi - solid and solid foods to complement breast milk and breast feeding to be continued for 2 years . Most of the time, these recommendations are not followed, due to false beliefs or cultural factors. This has resulted in malnutrition and increasing health hazards in children...

Nebraska family practitioners' infant feeding recommendations.

Science.gov (United States)

Auerbach, K G; Walburn, J

1987-01-01

The authors conducted an anonymous survey of 220 Nebraska family and general practitioners' attitudes and practice recommendations for infant feeding. Most practitioners' attitudes reflect published American Academy of Pediatrics (AAP) guidelines regarding using commercial formula for bottle-feeding babies rather than evaporated milk-based formulations. Ninety-two per cent agreed with recommendations relating to the need for fluoride supplementation when fluoride was unavailable in the water supply and 93% agreed that whole cow's milk was inappropriate in the infant's first year. Another 68% felt similarly about evaporated milk formulas. However, 32% of board certified and 53% of nonboard certified physicians continue to believe that early solid foods will reduce night waking. In 80% of the cases, practice recommendations disagreed with AAP guidelines by prescribing vitamin supplements for bottle-feeding babies receiving proprietary infant formulas. Additionally, two-thirds of the practitioners recommended unnecessary water complements and 62% suggested formula supplementation for breastfeeding babies. Solid foods and whole cow's milk for both breastfeeding and bottle-feeding babies often were recommended earlier than the second half of the first year.

Factors Associated with the Early Introduction of Complementary Feeding in Saudi Arabia

Directory of Open Access Journals (Sweden)

Riyadh A. Alzaheb

2016-07-01

Full Text Available Mothers’ instigation of complementary feeding before their infant reaches 6 months old risks shortening their breastfeeding duration, and high morbidity and mortality for their child. Complementary feeding practices require further investigation in Saudi Arabia. The present study aims to evaluate complementary feeding practices, and to establish which factors are associated with the early introduction of complementary feeding in the Saudi Arabian context. Cross-sectional research was conducted with 632 mothers of infants aged between 4 and 24 months attending five primary health care centers (PHCCs between July and December 2015 in Saudi Arabia. Data on participants’ socio-demographic characteristics and complementary feeding practices were collected via structured questionnaires. A regression analysis identified the factors associated with the early introduction of solid foods, defined as before 17 weeks. 62.5% of the study’s infants received solid foods before reaching 17 weeks old. The maternal factors at higher risk of early introduction of solids were: younger age; Saudi nationality; shorter education; employment within 6 months post-birth; caesareans; not breastfeeding fully for six weeks post-birth, and living in low-income households. Complementary feeding prior to 6 months postpartum was common in Saudi Arabia. Public health interventions are needed to reduce early complementary feeding, focusing on mothers at highest risk of giving solids too early.

Mathematical modeling of filling of gas centrifuge cascade for nickel isotope separation by various feed flow rate

Science.gov (United States)

Ushakov, Anton; Orlov, Alexey; Sovach, Victor P.

2018-03-01

This article presents the results of research filling of gas centrifuge cascade for separation of the multicomponent isotope mixture with process gas by various feed flow rate. It has been used mathematical model of the nonstationary hydraulic and separation processes occurring in the gas centrifuge cascade. The research object is definition of the regularity transient of nickel isotopes into cascade during filling of the cascade. It is shown that isotope concentrations into cascade stages after its filling depend on variable parameters and are not equal to its concentration on initial isotope mixture (or feed flow of cascade). This assumption is used earlier any researchers for modeling such nonstationary process as set of steady-state concentration of isotopes into cascade. Article shows physical laws of isotope distribution into cascade stage after its filling. It's shown that varying each parameters of cascade (feed flow rate, feed stage number or cascade stage number) it is possible to change isotope concentration on output cascade flows (light or heavy fraction) for reduction of duration of further process to set of steady-state concentration of isotopes into cascade.

Feed network and electromagnetic radiation source

Science.gov (United States)

Ardavan, Arzhang; Singleton, John; Linehan, Kevin E.; Ardavan, Houshang; Schmidt-Zwiefel, Andrea Caroline

2017-01-17

An antenna may include a volume polarization current radiator and a feed network. The volume polarization current radiator, includes a dielectric solid (such as a dielectric strip), and a plurality of closely-spaced excitation elements (24), each excitation element (24) being configured to induce a volume polarization current distribution in the dielectric solid proximate to the excitation element when a voltage is applied to the excitation element. The feed network is coupled to the volume polarization current radiator. The feed network also includes a plurality of passive power divider elements (32) and a plurality of passive delay elements (d1-d6) coupling the first port (30) and the plurality of second ports (108, 109, 164), the plurality of power divider elements (32) and the plurality of phase delay elements (d1-d6) being configured such that a radio-frequency signal that is applied to the first port (30) experiences a progressive change of phase as it is coupled to the plurality of second ports (108, 109, 164) so as to cause the volume polarization current distribution to propagate along the dielectric solid.

Management of marine cage aquaculture. Environmental carrying capacity method based on dry feed conversion rate.

Science.gov (United States)

Cai, Huiwen; Sun, Yinglan

2007-11-01

Marine cage aquaculture produces a large amount of waste that is released directly into the environment. To effectively manage the mariculture environment, it is important to determine the carrying capacity of an aquaculture area. In many Asian countries trash fish is dominantly used in marine cage aquaculture, which contains more water than pellet feed. The traditional nutrient loading analysis is for pellet feed not for trash fish feed. So, a more critical analysis is necessary in trash fish feed culturing areas. Corresponding to FCR (feed conversion rate), dry feed conversion rate (DFCR) was used to analyze the nutrient loadings from marine cage aquaculture where trash fish is used. Based on the hydrodynamic model and the mass transport model in Xiangshan Harbor, the relationship between the water quality and the waste discharged from cage aquaculture has been determined. The environmental carrying capacity of the aquaculture sea area was calculated by applying the models noted above. Nitrogen and phosphorus are the water quality parameters considered in this study. The simulated results show that the maximum nitrogen and phosphorus concentrations were 0.216 mg/L and 0.039 mg/L, respectively. In most of the sea area, the nutrient concentrations were higher than the water quality standard. The calculated environmental carrying capacity of nitrogen and phosphorus in Xiangshan Harbor were 1,107.37 t/yr and 134.35 t/yr, respectively. The waste generated from cage culturing in 2000 has already exceeded the environmental carrying capacity. Unconsumed feed has been identified as the most important origin of all pollutants in cage culturing systems. It suggests the importance of increasing the feed utilization and improving the feed composition on the basis of nutrient requirement. For the sustainable development of the aquaculture industry, it is an effective management measure to keep the stocking density and pollution loadings below the environmental carrying

Associations of acute stress and overnight heart rate with feed efficiency in beef heifers.

Science.gov (United States)

Munro, J C; Schenkel, F S; Physick-Sheard, P W; Fontoura, A B P; Miller, S P; Tennessen, T; Montanholi, Y R

2017-03-01

Proxies have the potential to accelerate feed efficiency (residual feed intake (RFI); kg dry matter/day) improvement, assisting with the reduction of beef cattle feed costs and environmental impact. Heart rate (HR) (beats per minute (BPM)) is associated with feed efficiency and influenced by autonomic activity and peripheral metabolism, suggesting HR could be used as a proxy for feed efficiency. Objectives were to assess associations between overnight HR, lying patterns and RFI, and between acute stress HR and RFI. Heifer calves (n=107; 408±28 days of age, 341±42.2 kg) and yearling heifers (n=36; 604±92 days of age, 539±52.2 kg) were exposed to a performance test to determine productive performance. Overnight HR (electrode based) and lying patterns (accelerometer based) were monitored on a subgroup of heifer calves (n=40; 20 lowest RFI; 20 highest RFI). In the 10-min acute stress assessment, all heifers were individually exposed to the opening and closing of an umbrella and HR before (HRBEF), in response to (HRMAX), after (HRAFT) and change (HRCHG; HRAFT-HRBEF) as a result of exposure were determined. Using polynomial regression, rate of HR decrease pre-exposure (β 1) and rates of HR increase (β 2) and decrease (β 3, β 4) post-exposure were determined. Heifer calves in the overnight assessment were classified into equal RFI groups (low RFI; high RFI) and HR means were treated as repeated measures and compared using multiple regression. In the acute stress assessment, heifers were classified within cattle category into equal RFI groups (low RFI; high RFI) and means and polynomial regression parameters were compared using multiple regression. Low-RFI heifer calves had a lower overnight HR (69.2 v. 72.6 BPM), similar HR change from lying to standing intervals (8.9 v. 9.2 BPM) and similar time lying (61.1% v. 64.5%) compared with high-RFI heifer calves. Low-RFI heifer calves had a higher absolute HRMAX (162.9 v. 145.7 BPM) and β 2 (-0.34 v. -0.20) than high

The effect of unrestricted milk feeding on the growth and health of Jersey calves

Directory of Open Access Journals (Sweden)

J. L. Uys

2011-04-01

Full Text Available This study was conducted to determine the effect of feeding high milk volumes on the growth rate, health and cross-sucking behaviour in group-fed Jersey calves. Three-day-old heifers (n = 120 in a seasonal calving dairy herd were randomly assigned to one of 6 treatment groups. Three groups received high milk volumes (HMV, consisting of ad libitum milk or milk replacer feeding twice a day, while 3 groups received restricted milk volumes (RMV, consisting of 2 twice daily, during the pre-weaning period. After a pre-weaning period during which feeding was reduced to once daily, all calves were weaned at 42 days and monitored until 60 days of age.Adjusting for birth mass, birth date,damparity and sire, average daily mass gain (ADG, both pre-weaning (days 0–42 and overall (days 0–60, was higher inHMVthan inRMVcalves (P<0.001.After weaning, growth rates showed no differences and at 60 days of age the HMV calves maintained a 6.74 kg advantage in mean body mass (P < 0.001. The mean intake of dry starter feed was higher in RMV than in HMVcalves. Overall feed conversion rate ofHMVcalves was 9.6%better thanRMVcalves. However, the variable cost per kg mass gain was 12 % higher for HMV calves. In the RMV groups 75 % of calves showed cross-sucking behaviour pre-weaning and 18 % post-weaning, whereas in HMV calves the proportions were 2 % and 7 %, respectively. There was no significant effect of milk volume on the incidence of diarrhoea.We conclude that the feeding of high volumes of milk to Jersey calves has a positive effect on growth rate, without compromising health or reducing solid feed intake after weaning. However, the higher cost of such a feeding system may limit its implementation.

Effect of dried solids of nejayote on broiler growth.

Science.gov (United States)

Velasco-Martinez, M; Angulo, O; Vazquez-Couturier, D L; Arroyo-Lara, A; Monroy-Rivera, J A

1997-11-01

The purpose of the present study was to test the suitability of the solids of nejayote (a waste product from the tortilla industry) in diets for broilers. The nejayote was obtained from two different tortilla-making factories and the solids were obtained by centrifuge then dried in a hot-air drier. Diets were formulated to be isocaloric and isonitrogenous according to the NRC dietary requirements (1994). Nejayote solids were supplemented at 2, 4, and 6% of the diet. Results show that the content of protein and calcium in the dried solids of nejayote were 5 and 13%, respectively. The performance of broilers fed diets supplemented with dried nejayote did not differ from that of those fed the control diet. Therefore, it is concluded that nejayote solids are suitable for broiler feed and do not affect growth performance. Utilization of nejayote solids at higher levels is a possibility provided that no adverse effects on body weight, feed utilization, and feed:gain ratios are observed.

Application of transient burning rate model of solid propellant in electrothermal-chemical launch simulation

Directory of Open Access Journals (Sweden)

Yan-jie Ni

2016-04-01

Full Text Available A 30 mm electrothermal-chemical (ETC gun experimental system is employed to research the burning rate characteristics of 4/7 high-nitrogen solid propellant. Enhanced gas generation rates (EGGR of propellants during and after electrical discharges are verified in the experiments. A modified 0D internal ballistic model is established to simulate the ETC launch. According to the measured pressure and electrical parameters, a transient burning rate law including the influence of EGGR coefficient by electric power and pressure gradient (dp/dt is added into the model. The EGGR coefficient of 4/7 high-nitrogen solid propellant is equal to 0.005 MW−1. Both simulated breech pressure and projectile muzzle velocity accord with the experimental results well. Compared with Woodley's modified burning rate law, the breech pressure curves acquired by the transient burning rate law are more consistent with test results. Based on the parameters calculated in the model, the relationship among propellant burning rate, pressure gradient (dp/dt and electric power is analyzed. Depending on the transient burning rate law and experimental data, the burning of solid propellant under the condition of plasma is described more accurately.

Survival and metamorphosis rate of swimming crab Portunus pelagicus larvae with the use of phytoecdysteroid in the artificial feed

Directory of Open Access Journals (Sweden)

Andi Nikhlani

2017-07-01

Full Text Available ABSTRACT The survival rate of blue swimming crabs and the larval metamorphosis processes are still low in hatcheries. The objective of this study was to evaluate the effects of different phytoecdysteroids doses on both the survival and the rate of Blue swimmer crab larvae metamorphosis. The study consisted of four different phytoecdysteroids treatments, namely: control (0 mg/100 g of feed, 1 mg/100 g of feed, 2 mg/100 g of feed, and 4 mg/100 g of feed. Each treatment was replicated three times. The survival rate of the larvae was analyzed through analysis of variance, while the rate of larval metamorphosis was descriptively analyzed. The results showed that the dose of phytoecdysteroid of 2 mg/100 g of artificial feed resulted in the highest survival and the fastest metamorphosis speed of crab larvae for zoea-2 and zoea-3, and the dose of 4 mg/100 g of artificial feed for stadia megalopa and crablet. Keywords: phytoecdysteroids, survival rate, metamorphosis, blue swimming crab  ABSTRAK Kelangsungan hidup rajungan dalam pembenihan masih rendah, dan proses metamorfosis larva masih lambat. Tujuan penelitian ini adalah untuk mengevaluasi pengaruh pemberian fitoekdisteroid dosis berbeda terhadap kelangsungan hidup dan kecepatan metamorfosis larva rajungan. Penelitian ini terdiri atas empat perlakuan dosis fitoekdisteroid yang berbeda, yaitu: kontrol (0 mg/100 g pakan, 1 mg/100 g pakan, 2 mg/100 g pakan, dan 4 mg/100 g pakan dengan masing-masing perlakuan dilakukan tiga kali ulangan. Kelangsungan hidup larva dianalisis menggunakan analisis sidik ragam, sedangkan kecepatan metamorfosis larva dianalisis secara deskriptif. Hasil penelitian menunjukkan bahwa dosis fitoekdisteroid sebanyak 2 mg/100 g pakan buatan menghasilkan kelangsungan hidup tertinggi dan proses metamorfosis larva rajungan tercepat untuk stadia zoea-2 dan zoea-3, serta  dosis 4 mg/100 g pakan buatan untuk stadia megalopa dan crablet. Kata kunci: fitoekdisteroid, kelangsungan

Breast feeding in Kelantan.

Science.gov (United States)

Balakrishnan, S; Hussein, H B

1977-04-01

The incidence of breastfeeding is investigated in relation to duration of breastfeeding without supplementation and the age when solids were first introduced in the infant's diet. The study also evaluates the awareness of the mothers of the benefits of breast milk. 461 mothers were interviewed in May 1976 by 3 doctors including the author. 95% (438) were found to breastfeed their babies at least once or twice a day. However, only 18% (86) of the mothers were fully breastfeeding up to 3 months and 9% (45) were breastfeeding without added solids up to 6 months. A disappointing finding was the introduction of solid foods by 78% (351) of the mothers before the end of the 3rd month; of these, 117 or 25% have introduced the solids as early as the 1st 6 months. Only 5% (23) were artificially feeding their infants. 86% (399) agreed that breast milk was the best milk for their children but only 277 (59%) agreed that infection occurs less frequently in breastfed than bottlefed children. 65% (302) were aware that solids should be introduced after 6 months to the infant's diet. Only 48% (222) were aware that a well-balanced diet is essential for an adequate supply of breast milk. Although 50% (232) reported that they were advised by nurses or bidans to breastfeed their children, only 37% (172) were given instructions on the technique of breastfeeding. Breastfeeding programs launched by the Ministry of Health should promote breastfeeding for at least 4-6 months duration and discourage early complement feeding and introduction of solids to infants less than 6 months of age.

Using automated feeders to wean calves fed large amounts of milk according to their ability to eat solid feed.

Science.gov (United States)

de Passillé, Anne Marie; Rushen, Jeffrey

2016-05-01

Dairy calves weaned off milk at an early age show signs of hunger and can lose weight. We examined whether using automated feeders to wean calves according to individual voluntary solid feed intake reduced the effects of weaning. Female Holstein calves were housed in groups of 5 to 9. All calves were fed 12 L/d milk and ad libitum grain starter and hay from automated feeders immediately after grouping, and were allocated to 3 weaning strategies: (1) early-weaned (EW; n=14): weaning began on d 40, and milk allowance gradually decreased until weaning was complete on d 48; (2) late-weaned (LW; n=14): weaning began on d 80 and was completed on d 89; (3) weaned by starter intake (WSI; n=28): weaning began when calves consumed 200g/d of starter and was completed when the calves consumed 1,400g/d. Each day, the automated feeders recorded quantities of milk, starter, and hay eaten by all calves, as well as the frequency of visits to the milk feeder; we used unrewarded visit frequency as a sign of hunger. Body weights (BW) were recorded weekly. We estimated daily digestible energy (DE) intake for each calf based on the milk, hay, and starter consumed. Average daily gains (ADG) were expressed as percent of BW. For calves in WSI, weaning began at 54.7±18.9 d (mean ± SD) of age, the duration of weaning was 21.1±10.6 d, and weaning ended at 75.8±10.7 d of age. Both LW and WSI calves had better ADG from wk 3 to 13 than EW calves. Calves in the WSI group drank less milk and ate more starter than LW calves but had similar ADG. During the period of weaning, EW calves made more unrewarded visits to the milk feeder than LW and WSI calves. Three EW calves lost weight during weaning, whereas all LW and WSI calves gained weight. Calves differ greatly in when they begin to eat solid feed and how quickly they increase the intake in response to a decrease in milk allowance. An advantage of automated feeders is that calves can be weaned at variable ages depending on their ability and

Genetic variation for growth rate, feed conversion efficiency, and disease resistance exists within a farmed population of rainbow trout

DEFF Research Database (Denmark)

Henryon, Mark; Jokumsen, Alfred; Berg, Peer

2002-01-01

The objective of this study was to test that additive genetic (co)variation for survival, growth rate, feed conversion efficiency, and resistance to viral haemorrhagic septicaemia (VHS) exists within a farmed population of rainbow trout. Thirty sires and 30 dams were mated by a partly factorial...... the predicted breeding values for VHS resistance and the predicted breeding values for the body weights, body length, and feed conversion efficiencies. These results demonstrate that additive genetic (co)variation for growth rate, feed conversion efficiency, and VHS resistance does exist within the farmed...... mating design. Each sire was mated to two dams, and each dam was mated to two sires, producing 50 viable full-sib families (29 sires, 25 dams). The fish from these families were reared for a 215-day growout period, and were assessed for survival between days 52 and 215, growth rate (i.e., body weight...

Effect of early exposure to different feed presentations on feed sorting of dairy calves.

Science.gov (United States)

Miller-Cushon, E K; Bergeron, R; Leslie, K E; Mason, G J; Devries, T J

2013-07-01

This study examined how early exposure to different feed presentations affects development of feed sorting in dairy calves. Twenty Holstein bull calves were exposed for the first 8 wk of life to 1 of 2 feed presentation treatments: concentrate and chopped grass hay (haylage, 21.5% high-moisture corn, and 16.0% protein supplement) in wk 12 to 13. Intake was recorded daily and calves were weighed twice a week. Fresh feed and orts were sampled on d 1 to 4 of wk 6, 8, 9, 11, 12, and 13 for analysis of feed sorting, which was assessed through nutrient analysis for the MIX diet and particle size analysis for the TMR. The particle separator had 3 screens (19, 8, and 1.18mm) producing long, medium, short, and fine particle fractions. Sorting of nutrients or particle fractions was calculated as the actual intake as a percentage of predicted intake; values >100% indicate sorting for, whereas values <100% indicate sorting against. Feed presentation did not affect dry matter intake or growth. Prior to weaning, all calves selected in favor of hay; MIX calves consumed more neutral detergent fiber (NDF) than predicted (103.6%) and less nonfiber carbohydrates (NFC) than predicted (92.6%), and COM calves consumed, as a percentage of dry matter intake, 40.3% hay (vs. 30% offered rate). In wk 8, calves fed COM consumed more NFC than calves fed MIX (1.0 vs. 0.95kg/d) and less NDF (0.43 vs. 0.54kg/d), indicating greater selection in favor of concentrate. However, when provided the MIX diet, calves previously fed COM did not sort, whereas calves previously fed MIX consumed more NFC intake than predicted (103.2%) and less NDF intake than predicted (97.6%). Calves previously fed MIX maintained increased sorting after transition to the novel TMR, sorting against long particles (86.5%) and for short (101.8%) and fine (101.2%) particles. These results indicate that initially providing dairy calves with solid feeds as separate components, compared with as a mixed ration, reduces the extent of

Solid formation in piperazine rate-based simulation

DEFF Research Database (Denmark)

Gaspar, Jozsef; Thomsen, Kaj; von Solms, Nicolas

2014-01-01

of view but also from a modeling perspective. The present work develops a rate-based model for CO2 absorption and desorption modeling for gas-liquid-solid systems and it is demonstrated for the piperazine CO2 capture process. This model is an extension of the DTU CAPCO2 model to precipitating systems....... It uses the extended UNIQUAC thermodynamic model for phase equilibria and thermal properties estimation. The mass and heat transfer phenomena is implemented in a film model approach, based on second order reactions kinetics. The transfer fluxes are calculated using the concentration of the dissolved...

SU-D-209-01: Can Fluoroscopic Air-Kerma Rates Be Reliably Measured with Solid-State Meters?

International Nuclear Information System (INIS)

Feng, C; Thai, L; Wagner, L; Ozus, B

2016-01-01

Purpose: Ionization chambers remain the standard for calibration of air-kerma rate measuring devices. Despite their strong energy-dependent response, solid state radiation detectors are increasingly used, primarily due to their efficiency in making standardized measurements. To test the reliability of these devices in measuring air-kerma rates, we compared ion chambers measurements with solid-state measurements for various mobile fluoroscopes operated at different beam qualities and air-kerma rates. Methods: Six mobile fluoroscopes (GE OEC models 9800 and 9900) were used to generate test beams. Using various field sizes and dose rate controls, copper attenuators and a lead attenuator were placed at the image receptor in varying combinations to generate a range of air-kerma rates. Air-kerma rates at 30 centimeters from the image receptors were measured using two 6-cm"3 ion chambers with electrometers (Radcal, models 1015 and 9015) and two with solid state detectors (Unfors Xi and Raysafe X2). No error messages occurred during measurements. However, about two months later, one solid-state device stopped working and was replaced by the manufacturer. Two out of six mobile fluoroscopic units were retested with the replacement unit. Results: Generally, solid state and ionization chambers agreed favorably well, with two exceptions. Before replacement of the detector, the Xi meter when set in the “RF High” mode deviated from ion chamber readings by factors of 2 and 10 with no message indicating error in measurement. When set in the “RF Low” mode, readings were within −4% to +3%. The replacement Xi detector displayed messages alerting the user when settings were not compatible with air-kerma rates. Conclusion: Air-kerma rates can be measured favorably well using solid-state devices, but users must be aware of the possibility that readings can be grossly in error with no discernible indication for the deviation.

SU-D-209-01: Can Fluoroscopic Air-Kerma Rates Be Reliably Measured with Solid-State Meters?

Energy Technology Data Exchange (ETDEWEB)

Feng, C; Thai, L; Wagner, L [The University of Texas Health Science Center at Houston, Houston, TX (United States); Ozus, B [CHI St Luke’s Health, Baylor St Luke’s Medical Center, Houston, TX (United States)

2016-06-15

Purpose: Ionization chambers remain the standard for calibration of air-kerma rate measuring devices. Despite their strong energy-dependent response, solid state radiation detectors are increasingly used, primarily due to their efficiency in making standardized measurements. To test the reliability of these devices in measuring air-kerma rates, we compared ion chambers measurements with solid-state measurements for various mobile fluoroscopes operated at different beam qualities and air-kerma rates. Methods: Six mobile fluoroscopes (GE OEC models 9800 and 9900) were used to generate test beams. Using various field sizes and dose rate controls, copper attenuators and a lead attenuator were placed at the image receptor in varying combinations to generate a range of air-kerma rates. Air-kerma rates at 30 centimeters from the image receptors were measured using two 6-cm{sup 3} ion chambers with electrometers (Radcal, models 1015 and 9015) and two with solid state detectors (Unfors Xi and Raysafe X2). No error messages occurred during measurements. However, about two months later, one solid-state device stopped working and was replaced by the manufacturer. Two out of six mobile fluoroscopic units were retested with the replacement unit. Results: Generally, solid state and ionization chambers agreed favorably well, with two exceptions. Before replacement of the detector, the Xi meter when set in the “RF High” mode deviated from ion chamber readings by factors of 2 and 10 with no message indicating error in measurement. When set in the “RF Low” mode, readings were within −4% to +3%. The replacement Xi detector displayed messages alerting the user when settings were not compatible with air-kerma rates. Conclusion: Air-kerma rates can be measured favorably well using solid-state devices, but users must be aware of the possibility that readings can be grossly in error with no discernible indication for the deviation.

Translocation of threatened New Zealand falcons to vineyards increases nest attendance, brooding and feeding rates.

Directory of Open Access Journals (Sweden)

Sara M Kross

Full Text Available Anthropogenic landscapes can be rich in resources, and may in some cases provide potential habitat for species whose natural habitat has declined. We used remote videography to assess whether reintroducing individuals of the threatened New Zealand falcon Falco novaeseelandiae into a highly modified agricultural habitat affected the feeding rates of breeding falcons or related breeding behavior such as nest attendance and brooding rates. Over 2,800 recording hours of footage were used to compare the behavior of falcons living in six natural nests (in unmanaged, hilly terrain between 4 km and 20 km from the nearest vineyard, with that of four breeding falcon pairs that had been transported into vineyards and nested within 500 m of the nearest vineyard. Falcons in vineyard nests had higher feeding rates, higher nest attendance, and higher brooding rates. As chick age increased, parents in vineyard nests fed chicks a greater amount of total prey and larger prey items on average than did parents in hill nests. Parents with larger broods brought in larger prey items and a greater total sum of prey biomass. Nevertheless, chicks in nests containing siblings received less daily biomass per individual than single chicks. Some of these results can be attributed to the supplementary feeding of falcons in vineyards. However, even after removing supplementary food from our analysis, falcons in vineyards still fed larger prey items to chicks than did parents in hill nests, suggesting that the anthropogenic habitat may be a viable source of quality food. Although agricultural regions globally are rarely associated with raptor conservation, these results suggest that translocating New Zealand falcons into vineyards has potential for the conservation of this species.

Feed rate affecting surface roughness and tool wear in dry hard turning of AISI 4140 steel automotive parts using TiN+AlCrN coated inserts

Science.gov (United States)

Paengchit, Phacharadit; Saikaew, Charnnarong

2018-02-01

This work aims to investigate the effects of feed rate on surface roughness (Ra) and tool wear (VB) and to obtain the optimal operating condition of the feed rate in dry hard turning of AISI 4140 chromium molybdenum steel for automotive industry applications using TiN+AlCrN coated inserts. AISI 4140 steel bars were employed in order to carry out the dry hard turning experiments by varying the feed rates of 0.06, 0.08 and 0.1 mm/rev based on experimental design technique that can be analyzed by analysis of variance (ANOVA). In addition, the cutting tool inserts were examined after machining experiments by SEM to evaluate the effect of turning operations on tool wear. The results showed that averages Ra and VB were significantly affected by the feed rate at the level of significance of 0.05. Averages Ra and VB values at the feed rate of 0.06 mm/rev were lowest compared to average values at the feed rates of 0.08 and 0.1 mm/rev, based on the main effect plot.

Effect of feeding silkworm on growth performance and feed efficiency of snakehead (Channa striata)

Science.gov (United States)

Firmani, U.; Lono

2018-04-01

The snakehead, Chana striata is a carnivorous freshwater fish and widely distributed in Asia. High demand of this fish has been triggering many aquaculturist to culture C. stiata. Feed was the important factor for fish growth. Silkworm has high protein content, low fat and can be used as natural feed for finfish. This study investigate the silkworm feed in C. striata. The treatment of this research were A (100 % pellet); B (100 % silkworm); C (combination of 75 % pellet and 25 % silkworm); D (combination of 50 % pellet and 50 % silkworm); and E (combination of 25 % pellet and 75 % silkworm). The variables measured in this study were relatif growth, specific growth rate, feed efficiency, feed conversion ratio, and survival rate. The result show that silkworm gave the high growth performance, feed efficiency and survival rate of the snakehead (Channa striata) compared with the control.

The Chinese-born immigrant infant feeding and growth hypothesis

Directory of Open Access Journals (Sweden)

Kristy A. Bolton

2016-10-01

Full Text Available Abstract Background Rapid growth in the first six months of life is a well-established risk factor for childhood obesity, and child feeding practices (supplementation or substitution of breast milk with formula and early introduction of solids have been reported to predict this. The third largest immigrant group in Australia originate from China. Case-studies reported from Victorian Maternal and Child Health nurses suggest that rapid growth trajectories in the infants of Chinese parents is common place. Furthermore, these nurses report that high value is placed by this client group on rapid growth and a fatter child; that rates of breastfeeding are low and overfeeding of infant formula is high. There are currently no studies which describe infant growth or its correlates among this immigrant group. Presentation of hypothesis We postulate that in Australia, Chinese-born immigrant mothers will have different infant feeding practices compared to non-immigrant mothers and this will result in different growth trajectories and risk of overweight. We present the Chinese-born immigrant infant feeding and growth hypothesis - that less breastfeeding, high formula feeding and early introduction of solids in infants of Chinese-born immigrant mothers living in Australia will result in a high protein intake and subsequent rapid growth trajectory and increased risk of overweight and obesity. Testing the hypothesis Three related studies will be conducted to investigate the hypothesis. These will include two quantitative studies (one cross-sectional, one longitudinal and a qualitative study. The quantitative studies will investigate differences in feeding practices in Chinese-born immigrant compared to non-immigrant mothers and infants; and the growth trajectories over the first 3.5 years of life. The qualitative study will provide more in-depth understanding of the influencing factors on feeding practices in Chinese-born immigrant mothers. Implications of the

Copepod feeding currents : flow patterns, filtration rates and energetics

NARCIS (Netherlands)

van Duren, L.A; Stamhuis, E.J; Videler, J.J

Particle image velocimetry was used to construct a quasi 3-dimensional image of the flow generated by the feeding appendages of the calanoid copepod Temora longicornis. By scanning layers of flow, detailed information was obtained on flow velocity and velocity gradients. The flow around feeding T.

Determining appropriate feed-in tariff rates to promote biomass-to-electricity generation in Eastern Ontario, Canada

International Nuclear Information System (INIS)

Moore, Steven; Durant, Vincent; Mabee, Warren E.

2013-01-01

On-site data collection, interviews, and financial models were used to determine the feed-in tariff (FIT) rate required to encourage investment in the generation of electricity from currently unused biomass from the Eastern Ontario forest industry. A financial model was adapted and run to determine the net present value, internal rate of return, and payback period associated with a 15 MW biomass-to-electricity facility. The analysis suggests that Ontario should consider a stronger incentive than the recently-offered CDN$ 0.13 kW −1 h −1 for biomass-to-electricity. If no customer for heat generated from the plant can be found, FIT rates between CDN$ 0.17–0.22 kW −1 h −1 are necessary to achieve a 15% internal rate of return and a simple payback of approximately 5 yr; achieving a price of CDN$ 0.013 kW −1 of thermal output still requires elevated FIT rates between CDN$ 0.15–0.21 kW −1 h −1 to meet economic performance criteria. Other barriers, particularly regulations regarding the use of operating engineers in steam plants, should also be addressed to facilitate development of biomass-to-electricity. Without these changes, it is likely that biomass will be significantly under-used and will not contribute to the renewable energy goals of Ontario. - Highlights: • Economic performance of biomass-to-electricity generation in Ontario is assessed. • Feed-in tariffs needed to meet industrial payback and IRR targets are determined. • Existing feed-in tariff rates for biomass must be raised to meet industrial targets. • Incentives that adjust feedstock price might be explored to increase biomass use

WTP Waste Feed Qualification: Hydrogen Generation Rate Measurement Apparatus Testing Report

Energy Technology Data Exchange (ETDEWEB)

Stone, M. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Newell, J. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Smith, T. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Pareizs, J. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2016-06-01

The generation rate of hydrogen gas in the Hanford tank waste will be measured during the qualification of the staged tank waste for processing in the Hanford Tank Waste Treatment and Immobilization Plant. Based on a review of past practices in measurement of the hydrogen generation, an apparatus to perform this measurement has been designed and tested for use during waste feed qualification. The hydrogen generation rate measurement apparatus (HGRMA) described in this document utilized a 100 milliliter sample in a continuously-purged, continuously-stirred vessel, with measurement of hydrogen concentration in the vent gas. The vessel and lid had a combined 220 milliliters of headspace. The vent gas system included a small condenser to prevent excessive evaporative losses from the sample during the test, as well as a demister and filter to prevent particle migration from the sample to the gas chromatography system. The gas chromatograph was an on line automated instrument with a large-volume sample-injection system to allow measurement of very low hydrogen concentrations. This instrument automatically sampled the vent gas from the hydrogen generation rate measurement apparatus every five minutes and performed data regression in real time. The fabrication of the hydrogen generation rate measurement apparatus was in accordance with twenty three (23) design requirements documented in the conceptual design package, as well as seven (7) required developmental activities documented in the task plan associated with this work scope. The HGRMA was initially tested for proof of concept with physical simulants, and a remote demonstration of the system was performed in the Savannah River National Laboratory Shielded Cells Mockup Facility. Final verification testing was performed using non-radioactive simulants of the Hanford tank waste. Three different simulants were tested to bound the expected rheological properties expected during waste feed qualification testing. These

Bench-Scale Evaluation of the Genifuel Hydrothermal Processing Technology for Wastewater Solids

Energy Technology Data Exchange (ETDEWEB)

Marrone, Philip A.; Elliott, Douglas C.; Billing, Justin M.; Hallen, Richard T.; Hart, Todd R.; Kadota, Paul; Moeller, Jeff C.; Randel, Margaaret A.; Schmidt, Andrew J.

2017-10-03

Hydrothermal Liquefaction (HTL) and Catalytic Hydrothermal Gasification (CHG) proof-of-concept bench-scale tests were performed to assess the potential of the Genifuel hydrothermal process technology for handling municipal wastewater sludge. HTL tests were conducted at 300-350°C and 20 MPa on three different feeds: primary sludge (11.9 wt% solids), secondary sludge (9.7 wt% solids), and post-digester sludge (also referred to as digested solids) (16.0 wt% solids). Corresponding CHG tests were conducted at 350°C and 20 MPa on the HTL aqueous phase output using a ruthenium based catalyst. A comprehensive analysis of all feed and effluent phases was also performed. Total mass and carbon balances closed to within ± 15% in all but one case. Biocrude yields from HTL tests were 37%, 25%, and 34% for primary sludge, secondary sludge, and digested solids feeds, respectively. The biocrude yields accounted for 59%, 39%, and 49% of the carbon in the feed for primary sludge, secondary sludge, and digested solids feeds, respectively. Biocrude composition and quality were comparable to that seen with biocrudes generated from algae feeds. Subsequent hydrotreating (i.e., upgrading) of the biocrude produced from primary sludge and digested solids resulted in a product with comparable physical and chemical properties to petroleum crude oil. CHG product gas consisted primarily of methane, with methane yields (relative to CHG input) on a carbon basis of 47%, 61%, and 64% for aqueous feeds that were the output of HTL tests with primary sludge, secondary sludge, and digested solids, respectively. Siloxane concentrations in the CHG product gas were below the detection limit and well below fuel input composition limits set by several engine manufacturers. Relative to that of the sludge feeds, the HTL-CHG process resulted in a reduction in chemical oxygen demand (COD) of greater than 99.9% and a reduction in residual solids for disposal of 94-99%. The test results, as a whole, support

Studies on Methanol Crossover in Liquid-Feed Direct Methanol Pem Fuel Cells

Science.gov (United States)

Narayanan, S. R.

1995-01-01

The performance of liquid feed direct methanol fuel cells using various types of Nafion membranes as the solid polymer electrolyte have been studied. The rate of fuel crossover and electrical performance has been measured for cells with Nafion membranes of various thicknesses and equivalent weights. The crossover rate is found to decrease with increasing thickness and applied current. The dependence of crossover rate on current density can be understood in terms of a simple linear diffusion model which suggests that the crossover rate can be influenced by the electrode structure in addition to the membrane. The studies suggest that Nafion EW 1500 is a very promising alternate to Nafion EW 1100 for direct methanol fuel cells.

Increasing milk solids production across lactation through genetic selection and intensive pasture-based feed system.

Science.gov (United States)

Coleman, J; Pierce, K M; Berry, D P; Brennan, A; Horan, B

2010-09-01

The objective of the study was to quantify the effect of genetic improvement using the Irish total merit index, the Economic Breeding Index (EBI), on overall performance and lactation profiles for milk, milk solids, body weight (BW), and body condition score (BCS) within 2 pasture-based systems of milk production likely to be used in the future, following abolition of the European Union's milk quota system. Three genotypes of Holstein-Friesian dairy cattle were established from within the Moorepark dairy research herd: LowNA, indicative of animals with North American origin and average or lower genetic merit at the time of the study; HighNA, North American Holstein-Friesians of high genetic merit; and HighNZ, New Zealand Holstein-Friesians of high genetic merit. Animals from within each genotype were randomly allocated to 1 of 2 possible pasture-based feeding systems (FS): 1) The Moorepark pasture (MP) system (2.64 cows/ha and 344 kg of concentrate supplement per cow per lactation) and 2) a high output per hectare (HC) system (2.85 cows/ha and 1,056 kg of concentrate supplement per cow per lactation). Pasture was allocated to achieve similar postgrazing residual sward heights for both treatments. A total of 126, 128, and 140 spring-calving dairy cows were used during the years 2006, 2007, and 2008, respectively. Each group had an individual farmlet of 17 paddocks and all groups were managed similarly throughout the study. The effects of genotype, FS, and the interaction between genotype and FS on milk production, BW, and BCS across lactation were studied using mixed models with factorial arrangements of genotype and FS accounting for the repeated cow records across years. No significant genotype by FS interaction was observed for any of the variables measured. Results show that milk solids production of the national average dairy cow can be increased across lactation through increased EBI. High EBI genotypes (HighNA and HighNZ) produced more milk solids per cow and

Rate dependent inelastic behavior of polycrystalline solids using a dislocation model

International Nuclear Information System (INIS)

Werne, R.W.; Kelly, J.M.

1980-01-01

A rate dependent theory of polycrystalline plasticity is presented in which the solid is modeled as an isotropic continuum with internal variables. The rate of plastic deformation is shown to be a function of the deviatoric portion of the Cauchy stress tensor as well as two scalar internal variables. The scalar internal variables, which are the dislocation density and mobile fraction, are governed by rate equations which reflect the evolution of microstructural processes. The model has been incorporated into a two dimensional finite element code and several example multidimensional problems are presented which exhibit the rate dependence of the material model

Solid state pump lasers with high power and high repetition rate

International Nuclear Information System (INIS)

Oba, Masaki; Kato, Masaaki; Arisawa, Takashi

1995-01-01

We built a laser diode pumped solid state green laser (LDPSSGL) rated at high repetition rate. Two laser heads are placed in one cavity with a rotator in between to design to avoid thermal lensing and thermal birefringence effect. Although average green laser power higher than 10 W was obtained at 1 kHz repetition rate with pulse width of 20-30 nsec, the beam quality was so much deteriorated that energy efficiency was as low as 2 %. Learning from this experience that high power oscillator causes a lot of thermal distortion not only in the laser rod but also in the Q-switch device, we proceeded to built a oscillator/amplifier system. A low power oscillator has a slab type crystal in the cavity. As a result spatial distribution of laser power was extremely improved. As we expect that the high repetition rate solid state laser should be CW operated Q-switch type laser from the view point of lifetime of diode lasers, a conventional arc lamp pumped CW Q-switch green YAG laser of which the repetition rate is changeable from 1 kHz to 5 kHz and the pulse width is 250-570 nsec was also tested to obtain pumping characteristics of a dye laser as a function of power, pulse width etc., and dye laser pulse width of 100-130 nsec were obtained. (author)

Bio-processing of agro-byproducts to animal feed.

Science.gov (United States)

Ajila, C M; Brar, S K; Verma, M; Tyagi, R D; Godbout, S; Valéro, J R

2012-12-01

Agricultural and food-industry residues constitute a major proportion (almost 30%) of worldwide agricultural production. These wastes mainly comprise lignocellulosic materials, fruit and vegetable wastes, sugar-industry wastes as well as animal and fisheries refuse and byproducts. Agro-residues are rich in many bioactive and nutraceutical compounds, such as polyphenolics, carotenoids and dietary fiber among others. Agro residues are a major valuable biomass and present potential solutions to problems of animal nutrition and the worldwide supply of protein and calories, if appropriate technologies can be used for their valorization by nutrient enrichment. Technologies available for protein enrichment of these wastes include solid substrate fermentation, ensiling, and high solid or slurry processes. Technologies to be developed for the reprocessing of these wastes need to take account of the peculiarities of individual wastes and the environment in which they are generated, reprocessed, and used. In particular, such technologies need to deliver products that are safe, not just for animal feed use, but also from the perspective of human feeding. This review focuses on the major current applications of solid-state fermentation in relation to the feed sector.

Situation and determinants of the infant and young child feeding (IYCF) indicators in Madagascar: analysis of the 2009 Demographic and Health Survey.

Science.gov (United States)

Rakotomanana, Hasina; Gates, Gail E; Hildebrand, Deana; Stoecker, Barbara J

2017-10-16

Studies evaluating child feeding in Madagascar are scarce despite its importance in child growth during the first two years of life. This study assessed the associations between the WHO infant and young child feeding (IYCF) indicators and stunting and identified determinants of inappropriate child feeding practices. The most recent Demographic and Health Survey was used including a total of 1956 infants aged 0-23 months. Logistic regressions were performed for the association between IYCF indicators and stunting and for the determination of risk factors for inappropriate feeding practices. The rates of initiation of breastfeeding within one hour after birth (77.2%), continued breastfeeding at one year (99.6%) and timely introduction of solid, semi-solid or soft foods at 6-8 months (88.3%) were high. Exclusive breastfeeding under 6 months (48.8%), attaining minimum dietary diversity (22.2%) and consumption of iron-rich foods (19.6%) were relatively low. Higher length-for-age was associated with achieving minimum dietary diversity (pMadagascar. Improving dietary diversity in children aged 6-23 months may help reduce stunting. The identified risk factors for inappropriate feeding practices could be used in directing future nutrition sensitive interventions.

Early formula feeding practices and their potential contribution to later obesity risk

LENUS (Irish Health Repository)

Tarrant, R C

2013-01-02

Background and Aims: Early feeding practices, including early introduction to solid foods and overfeeding, are known risk factors for childhood obesity. This study aimed to assess maternal formula feeding practices and infant formula feeding patterns, factors that are known to potentially contribute to later obesity risk. \\r\

Optimal Water Recovery with Emphasis on Flocculant Consumption Rate in the Thickener

Directory of Open Access Journals (Sweden)

Marzieh Hosseininasab

2017-11-01

Full Text Available Water plays a vital role in mineral processing as evidenced by the approximately 2 to 3 tons of water used for the treatment of one ton of ore. A major portion of this water may be recovered in thickeners. This study aimed to control the wet tailings output of the Hematite Gol-e-Gohar plant by changing  flocculant dosage and type and solid percentage in the feed in order to enhance effluent clarity and reduce water consumption. Materials and A series of settling experiments were performed using different combinations of the flocculants (A25, A26 Yazd, A26 Esfahan, A27, and A28, flocculant doses (20, 25, 30, 35, and 40 gr/ton, and solid loads in the feed (5, 7, 9, 10, and 11% to the thickener. The L25 Taguchi design method was chosen to handle the five different levels of the three factors. Adopting a 95% confidence interval, the results of analysis of variance (ANOVA revealed that flocculant consumption rate had a high effect on settling velocity (p = 0.006 while flocculant type and solid percentage in the feed had no significant effects. Moreover, it was found that A26 (Akhtar-chemistry Company, Yazd used at a rate of 40 g/ton improved the settling performance to yield an optimal water clarity. Using the findings of this study in process planning at the plant led to a considerable reduction (from the original 0.86 to 0.49 m3 in average water consumption per ton of input material so that the solid content of the thickener underflow rose from 7 to 45%.

Supported liquid membrane based removal of lead(II) and cadmium(II) from mixed feed: Conversion to solid waste by precipitation

Energy Technology Data Exchange (ETDEWEB)

Bhatluri, Kamal Kumar; Manna, Mriganka Sekhar; Ghoshal, Aloke Kumar; Saha, Prabirkumar, E-mail: p.saha@iitg.ac.in

2015-12-15

Highlights: • Simultaneous removal of two heavy metals lead and cadmium. • Conversion of liquid waste to solid precipitation. • Precipitation facilitates the metals transportation through LM. • Solidification of liquid waste minimizes the final removal of waste. - Abstract: Simultaneous removal of two heavy metals, lead(II) and cadmium(II), from mixed feed using supported liquid membrane (SLM) based technique is investigated in this work. The carrier-solvent combination of “sodium salt of Di-2-ethylhexylphosphoric acid (D2EHPA) (4% w/w) in environmentally benign coconut oil” was immobilized into the pores of solid polymeric polyvinylidene fluoride (PVDF) support. Sodium carbonate (Na{sub 2}CO{sub 3}) was used as the stripping agent. Carbonate salts of lead(II) and cadmium(II) were formed in the stripping side interface and they were insoluble in water leading to precipitation inside the stripping solution. The transportation of solute is positively affected due to the precipitation. Lead(II) removal was found to be preferential due to its favorable electronic configuration. The conversion of the liquid waste to the solid one was added advantage for the final removal of hazardous heavy metals.

INFLUENCE OF FEEDING TIME ON FEED UTILIZATION BY SIAMESE CATFISH, Pangasius hypophthalmus JUVENILE

Directory of Open Access Journals (Sweden)

Nina Meilisza

2010-06-01

Full Text Available Siamese catfish (Pangasius hypophthalmus at juvenile stage is used as ornamental fish by fish hobbies because of their beautiful shape and movement. Feeding time is a part of feeding management to get the best and effective strategy on feed input. This study aimed to determine the growth of Siamese catfish juvenile by looking at the influence of feeding time on feed utilization. The average individual weight of juveniles used was ± 3.2 g stocked 15 fish per aquarium equipped with recirculation system. Two level factors in the factorial design consisted of 4 feeding times (at 8:00, at 12:00, at 16:00, and as control (8:00, 12:00, 16:00 and feeding level (45 g feed kg-1 fish, 90 g feed kg-1 fish. Interaction between feeding time and feeding level resulting eight types of treatments research, namely A (8/45, B (12/45, C (16/45, D (8:12:16/45, E (8:12:16/90, F (8/90, G (12/90, and H (16/90. The results showed that feeding time had significant effect on the specific growth rate, feed conversion, and protein efficiency ratio and were significantly different among the treatments (P<0.05. Besides feeding time control (treatments D and E, treatment C also showed the highest of specific growth rate (2.03%, protein efficiency ratio (1.46, and the lowest feed conversion ratio (1.85.

Breast-feeding and the nutritional status of nursing children in Chile.

Science.gov (United States)

Castillo, C; Atalah, E; Riumalló, J; Castro, R

1996-06-01

The work reported here sought to describe the feeding patterns of Chilean children up to 18 months old and their relation to nutritional status. To this end, a survey was conducted in 1993 of 9330 Chilean children under 18 months old who were receiving care through the National Health Service System-which provides care for 75% of all children under age 6. The children, whose mothers or caretakers were interviewed, constituted 94% of a sample selected at random from 102 of the 320 urban health clinics located throughout the country. The interview served to identify the type of feeding (exclusive breast-feeding, breast-feeding plus bottle-feeding, breast-feeding plus solid food, exclusive bottle-feeding, or bottle-feeding plus solid food) and to determine the nutritional status of the participants in terms of standards used by the United States National Center for Health Statistics and the World Health Organization. Children were deemed at risk of malnutrition if they had z scores on the weight-for-age distribution between 1.0 and 2.0 standard deviations below the US/WHO standard and as actually malnourished if they had z scores of over 2.0 standard deviations below the standard. The survey found exclusive breast-feeding prevalences of 86.5%, 66.7%, and 25.3% among infants 1, 3, and 6 months old. Some 12.1% of the participants were found to have a weight-for-age deficiency, 30.7% exhibited a height-for-age deficiency, and 35.7% were found to be over-weight. The prevalence of weight-for-age and height-for-age deficiencies were found to be considerably higher among bottle-fed children than among breast-fed children. In general, the results demonstrated the benefits of exclusive breast-feeding through the first 6 months of life, the need to complement exclusive breast-feeding with solid food after that time, and the superior nutritional status of breast-fed children within the age groups studied.

Original communication: Basal metabolic rate in children with a solid tumor

NARCIS (Netherlands)

Broeder, den E.; Oeseburg, B.; Lippens, R.J.J.; Staveren, van W.A.; Sengers, R.C.A.; Hof, van 't M.A.; Tolboom, J.J.M.

2001-01-01

Objective: To study the level of and changes in basal metabolic rate (BMR) in children with a solid tumour at diagnosis and during treatment in order to provide a more accurate estimate of energy requirements for nutritional support. Design: An observational study. Setting: Tertiary care at the

Impact of socioeconomic status on municipal solid waste generation rate.

Science.gov (United States)

Khan, D; Kumar, A; Samadder, S R

2016-03-01

The solid waste generation rate was expected to vary in different socioeconomic groups due to many environmental and social factors. This paper reports the assessment of solid waste generation based on different socioeconomic parameters like education, occupation, income of the family, number of family members etc. A questionnaire survey was conducted in the study area to identify the different socioeconomic groups that may affect the solid waste generation rate and composition. The average waste generated in the municipality is 0.41 kg/capita/day in which the maximum waste was found to be generated by lower middle socioeconomic group (LMSEG) with average waste generation of 0.46 kg/capita/day. Waste characterization indicated that there was no much difference in the composition of wastes among different socioeconomic groups except ash residue and plastic. Ash residue is found to increase as we move lower down the socioeconomic groups with maximum (31%) in lower socioeconomic group (LSEG). The study area is a coal based city hence application of coal and wood as fuel for cooking in the lower socioeconomic group is the reason for high amount of ash content. Plastic waste is maximum (15%) in higher socioeconomic group (HSEG) and minimum (1%) in LSEG. Food waste is a major component of generated waste in almost every socioeconomic group with maximum (38%) in case of HSEG and minimum (28%) in LSEG. This study provides new insights on the role of various socioeconomic parameters on generation of household wastes. Copyright © 2016 Elsevier Ltd. All rights reserved.

Preliminary investigation on the conversion of aquaculture solid ...

African Journals Online (AJOL)

Conversion of aquaculture solid wastes into single cell protein (SCP) for fish feed through solid state fermentation using three fungi species, Aspergilus niger, Trichodema viride and Rhizopus species were investigated. Solid aquaculture waste was collected from the sedimentation unit of a re-circulating aquaculture farm in ...

Residual feed intake as a feed efficiency selection tool and its relationship with feed intake, performance and nutrient utilization in Murrah buffalo calves.

Science.gov (United States)

Subhashchandra Bose, Bisitha Kattiparambil; Kundu, Shivlal Singh; Tho, Nguyen Thi Be; Sharma, Vijay Kumar; Sontakke, Umesh Balaji

2014-04-01

Residual feed intake (RFI) is the difference between the actual and expected feed intake of an animal based on its body weight and growth rate over a specific period. The objective of this study was to determine the RFI of buffalo calves using residuals from appropriate linear regression models involving dry matter intake (DMI), average daily gain (ADG) and mid-test metabolic body weight. Eighteen male Murrah buffalo calves of 5-7 months were selected and fed individually. A feeding trial using ad libitum feeding of total mixed ration (TMR, concentrate/roughage = 40:60) was conducted for 52 days in which the daily DMI, weekly body weight (BW) and growth rate of the calves were monitored. RFI of calves ranged from -0.20 to +0.23 kg/day. Mean DMI (in grams per kilogram of BW(0.75)) during the feeding trial period was significantly (P 0.05) between low and high RFI groups. Over the course of a trial period, low RFI group animals consumed 10% less feed compared to high RFI group of animals, yet performed in a comparable manner in terms of growth rate. Metabolizable energy for maintenance (MEm) was found to be significantly (P feed efficiency.

Supported liquid membrane based removal of lead(II) and cadmium(II) from mixed feed: Conversion to solid waste by precipitation.

Science.gov (United States)

Bhatluri, Kamal Kumar; Manna, Mriganka Sekhar; Ghoshal, Aloke Kumar; Saha, Prabirkumar

2015-12-15

Simultaneous removal of two heavy metals, lead(II) and cadmium(II), from mixed feed using supported liquid membrane (SLM) based technique is investigated in this work. The carrier-solvent combination of "sodium salt of Di-2-ethylhexylphosphoric acid (D2EHPA) (4% w/w) in environmentally benign coconut oil" was immobilized into the pores of solid polymeric polyvinylidene fluoride (PVDF) support. Sodium carbonate (Na2CO3) was used as the stripping agent. Carbonate salts of lead(II) and cadmium(II) were formed in the stripping side interface and they were insoluble in water leading to precipitation inside the stripping solution. The transportation of solute is positively affected due to the precipitation. Lead(II) removal was found to be preferential due to its favorable electronic configuration. The conversion of the liquid waste to the solid one was added advantage for the final removal of hazardous heavy metals. Copyright © 2015 Elsevier B.V. All rights reserved.

Environment and feeding change the ability of heart rate to predict metabolism in resting Steller sea lions (Eumetopias jubatus).

Science.gov (United States)

Young, Beth L; Rosen, David A S; Haulena, Martin; Hindle, Allyson G; Trites, Andrew W

2011-01-01

The ability to use heart rate (fh) to predict oxygen consumption rates ([Formula: see text]) in Steller sea lions and other pinnipeds has been investigated in fasting animals. However, it is unknown whether established fh:[Formula: see text] relationships hold under more complex physiological situations, such as when animals are feeding or digesting. We assessed whether fh could accurately predict [Formula: see text] in trained Steller sea lions while fasting and after being fed. Using linear mixed-effects models, we derived unique equations to describe the fh:[Formula: see text] relationship for fasted sea lions resting on land and in water. Feeding did not significantly change the fh:[Formula: see text] relationship on land. However, Steller sea lions in water displayed a different fh:[Formula: see text] relationship after consuming a 4-kg meal compared with the fasting condition. Incorporating comparable published fh:[Formula: see text] data from Steller sea lions showed a distinct effect of feeding after a 6-kg meal. Ultimately, our study illustrated that both feeding and physical environment are statistically relevant when deriving [Formula: see text] from telemetered fh, but that only environment affects the practical ability to predict metabolism from fh. Updating current bioenergetic models with data gathered using these predictive fh:[Formula: see text] equations will yield more accurate estimates of metabolic rates of free-ranging Steller sea lions under a variety of physiological, behavioral, and environmental states.

Direct determination of bulk etching rate for LR-115-II solid state ...

Indian Academy of Sciences (India)

The thickness of the removed layer of the LR-115-II solid state nuclear track detector during etching is measured directly with a rather precise instrument. Dependence of bulk etching rate on temperature of the etching solution is investigated. It has been found that the bulk etching rate is 3.2 m/h at 60°C in 2.5 N NaOH of ...

Effects of feed consumption rate of beef cattle offered a diet supplemented with nitrate ad libitum or restrictively on potential toxicity of nitrate.

Science.gov (United States)

Lee, C; Araujo, R C; Koenig, K M; Beauchemin, K A

2015-10-01

The objective of the study was to investigate the effects of feed consumption rate on potential toxicity, rumen fermentation, and eating behavior when beef heifers were fed a diet supplemented with nitrate (NI). Twelve ruminally cannulated heifers (827 ± 65.5 kg BW) were used in a randomized complete block design. The experiment consisted of 10-d adaptation, 8-d urea-feeding, and 3-d nitrate-feeding periods. All heifers were fed a diet supplemented with urea (UR) during the adaptation and urea-feeding periods, whereas the NI diet (1.09% NO in dietary DM) was fed during the nitrate-feeding period. After adaptation, heifers were randomly assigned to ad libitum or restrictive feeding (about 80% of ad libitum intake) for the urea- and nitrate-feeding periods. Ad libitum DMI decreased (14.1 vs. 15.1 kg/d; nitrate feeding changed the consumption pattern (a more even distribution of feed intake over the day). The increased feed consumption from 0 to 3 h after feeding the NI diet restrictively vs. ad libitum numerically decreased ( = 0.11) rumen pH and numerically or significantly increased ( = 0.01 to 0.28) rumen ammonia, NO, and NO; blood methemoglobin; and plasma NO and NO at 3 h. Regression analysis indicated that increased feed consumption (0 to 3 h) exponentially elevated ( nitrate-feeding period, the nitrate content of orts on d 2 and 3 was greater ( = 0.02) than that on d 1. In conclusion, the increased consumption rate of a diet supplemented with nitrate was an important factor influencing risk of nitrate toxicity based on blood methemoglobin and plasma NO. In addition, the pattern of daily feed consumption was altered by nitrate (creating a "nibbling" pattern of eating) in beef heifers.

A qualitative study of the infant feeding beliefs and behaviours of mothers with low educational attainment.

Science.gov (United States)

Russell, Catherine Georgina; Taki, Sarah; Azadi, Leva; Campbell, Karen J; Laws, Rachel; Elliott, Rosalind; Denney-Wilson, Elizabeth

2016-05-21

Infancy is an important period for the promotion of healthy eating, diet and weight. However little is known about how best to engage caregivers of infants in healthy eating programs. This is particularly true for caregivers, infants and children from socioeconomically disadvantaged backgrounds who experience greater rates of overweight and obesity yet are more challenging to reach in health programs. Behaviour change interventions targeting parent-infant feeding interactions are more likely to be effective if assumptions about what needs to change for the target behaviours to occur are identified. As such we explored the precursors of key obesity promoting infant feeding practices in mothers with low educational attainment. One-on-one semi-structured telephone interviews were developed around the Capability Opportunity Motivation Behaviour (COM-B) framework and applied to parental feeding practices associated with infant excess or healthy weight gain. The target behaviours and their competing alternatives were (a) initiating breastfeeding/formula feeding, (b) prolonging breastfeeding/replacing breast milk with formula, (c) best practice formula preparation/sub-optimal formula preparation, (d) delaying the introduction of solid foods until around six months of age/introducing solids earlier than four months of age, and (e) introducing healthy first foods/introducing unhealthy first foods, and (f) feeding to appetite/use of non-nutritive (i.e., feeding for reasons other than hunger) feeding. The participants' education level was used as the indicator of socioeconomic disadvantage. Two researchers independently undertook thematic analysis. Participants were 29 mothers of infants aged 2-11 months. The COM-B elements of Social and Environmental Opportunity, Psychological Capability, and Reflective Motivation were the key elements identified as determinants of a mother's likelihood to adopt the healthy target behaviours although the relative importance of each of the

Feeding of Aspergillus oryzae fermentation culture (AOFC to growing sheep: 2. Growth rate and feed efficiency

Directory of Open Access Journals (Sweden)

D Lubis

2002-12-01

Full Text Available Utilization of yeast and or filamentous fungi as feed additive to ruminants has been of interest since the late 1980’s. Two fungi species have been commercially produced in the United States, (1 Yea-Sacc containing living cells of Saccharomyces cerevisiae and (2 Amaferm bearing Aspergillus oryzae fermentation extract. It has been demonstrated and proven that the cultures can enhance rumen development and function in young ruminants. This paper concerns the use of Aspergillus oryzae fermentation culture (AOFC as feed additive for young-growing male ‘Garut’ sheep. The A. oryzae was cultured in a media made of mineral-enriched ‘onggok’ flour, a material of tapioca processing waste. The AOFC was prepared gradually by incubating the fungus at room temperature (26 – 300C for 5 days, dried at 400C and ground. The AOFC was added to a commercial concentrate (GT-03 at 0, 5 and 10% (w/w levels, as treatment C0 (control, C1, and C2, respectively. Fifteen growing ‘Garut’ sheep were used and the concentrate feed treatments were randomly allotted based on a randomized block design. Drinking water was available at all time. The amount of feed offered (chopped King grass and concentrates and their refusals were weighed daily and live-weight of sheep was measured once a week in the morning. Daily feces was collected and weighed in the last 10 days of the 14-week experimental period. All feed and fecal samples were analyzed for dry matter, crude protein, total fiber (NDF, and ash. AOFC supplementation resulted in higher weight gains (P<0.05, which were 94.81; 122.08; and 140.52 g/d for C0, C1, and C2 treatments, respectively. Dry and organic matter, as well as protein intake was also significantly increased by inclusion of AOFC into concentrate diet (P<0.05. The increment in nutrient intake was from increased consumption of concentrates, and not from King grass, however, there was no effect of AOFC supplementation on feed efficiency.

The Influence of Maternal Psychosocial Characteristics on Infant Feeding Styles

OpenAIRE

Barrett, Katherine J.; Thompson, Amanda L.; Bentley, Margaret E.

2016-01-01

Maternal feeding styles in infancy and early childhood are associated with children’s later risk for overweight and obesity. Maternal psychosocial factors that influence feeding styles during the complementary feeding period, the time during which infants transition from a milk-based diet to one that includes solid foods and other non-milk products, have received less attention. The present study explores how maternal psychosocial factors—specifically self-esteem, parenting ...

Influence of solvent evaporation rate and formulation factors on solid dispersion physical stability.

Science.gov (United States)

Wu, Jian X; Yang, Mingshi; Berg, Frans van den; Pajander, Jari; Rades, Thomas; Rantanen, Jukka

2011-12-18

New chemical entities (NCEs) often show poor water solubility necessitating solid dispersion formulation. The aim of the current study is to employ design of experiments in investigating the influence of one critical process factor (solvent evaporation rate) and two formulation factors (PVP:piroxicam ratio (PVP:PRX) and PVP molecular weight (P(MW))) on the physical stability of PRX solid dispersion prepared by the solvent evaporation method. The results showed the rank order of an increase in factors contributing to a decrease in the extent of PRX nucleation being evaporation rate>PVP:PRX>P(MW). The same rank order was found for the decrease in the extent of PRX crystal growth in PVP matrices from day 0 up to day 12. However, after 12days the rank became PVP:PRX>evaporation rate>P(MW). The effects of an increase in evaporation rate and PVP:PRX ratio in stabilizing PRX were of the same order of magnitude, while the effect from P(MW) was much smaller. The findings were confirmed by XRPD. FT-IR showed that PRX recrystallization in the PVP matrix followed Ostwald's step rule, and an increase in the three factors all led to increased hydrogen bonding interaction between PRX and PVP. The present study showed the applicability of the Quality by Design approach in solid dispersion research, and highlights the need for multifactorial analysis. Copyright © 2011 Elsevier B.V. All rights reserved.

Effect of replacement of fish meal by potato protein concentrate in the diet for rainbow trout on feeding rate, digestibility and growth

DEFF Research Database (Denmark)

Xie, Shougi; Jokumsen, Alfred

1999-01-01

Six isonitrogenous and isoenergetic diets were composed to investigate the effects of incorporation of potato protein concentrate (PPC) and supplementation of methionine in the diet for rainbow trout (Oncorhynchus mykiss) on feeding rate, digestion, growth, feed utilization and body composition. ...

The Effectiveness of Experimental Diet with Varying Levels of Papain on The Growth Performance, Survival Rate and Feed Utilization of Keureling Fish (Tor tambra

Directory of Open Access Journals (Sweden)

Zainal Abidin Muchlisin

2016-09-01

Full Text Available The objective of present study was to determine the optimum level of papain in the diet of keureling fish (Tor tambra. The complete random design was utilized in this study. Six levels of papain dosage were tested in triplicates, i.e. 0 (control; 17.5 mg kg-1,  20.0 mg kg-1, 22.5 mg kg-1, 25.0 mg kg-1 and 27.5 mg kg-1 of feed. The experimental fish were fed the experimental diet two times a day at 8 AM and 5 PM at feeding level of 5% body weight for 90 days. The Anova test result showed that papain enzyme  gave a significant effect on the weight gain, daily growth rate, specific growth rate, survival rate, feed conversion ratio and feed efficiency (P<0.05. The Duncan multi-rage test result showed that the higher values for all measured parameters were obtained at the dosage of 27.5 mg kg-1. Therefore, it is concluded that the optimum dosage of papain enzyme for keureling fish was 27.5 mg kg-1 of feed.How to CiteMuchlisin, Z. A., Afrido, F., Murda, T., Fadli, N., Muhammadar, A. A., Jalil, Z., & Yulvizar, C. (2016. The Effectiveness of Experimental Diet with Varying Levels of Papain on The Growth Performance, Survival Rate and Feed Utilization of Keureling Fish (Tor tambra. Biosaintifika: Journal of Biology & Biology Education, 8(2, 172-177.

Competing infant feeding information in mothers' networks: advice that supports v. undermines clinical recommendations.

Science.gov (United States)

Ashida, Sato; Lynn, Freda B; Williams, Natalie A; Schafer, Ellen J

2016-05-01

To identify the social contextual factors, specifically the presence of information that supports v. undermines clinical recommendations, associated with infant feeding behaviours among mothers in low-income areas. Cross-sectional survey evaluating social support networks and social relationships involved in providing care to the infant along with feeding beliefs and practices. Out-patient paediatric and government-funded (Women, Infants, and Children) clinics in an urban, low-income area of the south-eastern USA. Eighty-one low-income mothers of infants between 0 and 12 months old. Most mothers reported receiving both supportive and undermining advice. The presence of breast-feeding advice that supports clinical recommendations was associated with two infant feeding practices that are considered beneficial to infant health: ever breast-feeding (OR=6·7; 95% CI 1·2, 38·1) and not adding cereal in the infant's bottle (OR=15·9; 95% CI 1·1, 227·4). Advice that undermines clinical recommendations to breast-feed and advice about solid foods were not associated with these behaviours. Efforts to facilitate optimal infant feeding practices may focus on increasing information supportive of clinical recommendations while concentrating less on reducing the presence of undermining information within mothers' networks. Cultural norms around breast-feeding may be stronger than the cultural norms around the introduction of solid foods in mothers' social environments; thus, additional efforts to increase information regarding introduction of solid foods earlier in mothers' infant care career may be beneficial.

Threatened Caribbean coral is able to mitigate the adverse effects of ocean acidification on calcification by increasing feeding rate.

Directory of Open Access Journals (Sweden)

Erica K Towle

Full Text Available Global climate change threatens coral growth and reef ecosystem health via ocean warming and ocean acidification (OA. Whereas the negative impacts of these stressors are increasingly well-documented, studies identifying pathways to resilience are still poorly understood. Heterotrophy has been shown to help corals experiencing decreases in growth due to either thermal or OA stress; however, the mechanism by which it mitigates these decreases remains unclear. This study tested the ability of coral heterotrophy to mitigate reductions in growth due to climate change stress in the critically endangered Caribbean coral Acropora cervicornis via changes in feeding rate and lipid content. Corals were either fed or unfed and exposed to elevated temperature (30°C, enriched pCO2 (800 ppm, or both (30°C/800 ppm as compared to a control (26°C/390 ppm for 8 weeks. Feeding rate and lipid content both increased in corals experiencing OA vs. present-day conditions, and were significantly correlated. Fed corals were able to maintain ambient growth rates at both elevated temperature and elevated CO2, while unfed corals experienced significant decreases in growth with respect to fed conspecifics. Our results show for the first time that a threatened coral species can buffer OA-reduced calcification by increasing feeding rates and lipid content.

Mothers who formula feed: their practices, support needs and factors influencing their Infant feeding decision

LENUS (Irish Health Repository)

Tarrant, R C

2013-01-01

The majority of mothers in Ireland provide formula milk to their infants during the initial weeks postpartum; however, data are lacking on their formula feeding practices and support needs. This prospective Dublin-based observational study, which included 450 eligible mother-term infant pairs recruited and followed up to 6 months postpartum, aimed to advance our understanding of maternal formula feeding practices, their reasons for deciding to formula feed, sources of feeding information and perceived support needs; insights into infant formula milk consumption patterns in relation to current feeding guidelines are also provided. In summary, the vast majority of infants at 6 weeks were provided with formula milk (n = 368; 81.8%). Positive maternal perceptions of formula feeding were among the most frequently reported reasons underlying mothers’ decision to formula feed (e.g. convenience, 17.3%). Potential public health concerns over the large formula milk volumes consumed by infants (mean 205ml\\/kilogram\\/day) relative to infant feeding guidelines (150ml\\/kilogram\\/day) were raised from this study. Some mothers continue to add solid foods to infant bottle feeds at 6 weeks (3.8%) and 6 months (6%), a non-recommended feeding practice posing a choking risk for infants. Crucially, this study highlights the need to provide greater support and information to mothers who decide to formula feed postpartum including practical information on sterilisation and formula reconstitution. While breastfeeding promotion and research continues to be a public health priority in Ireland, addressing the support and information needs of mothers who formula feed, an underrepresented and understudied population in the literature, also needs to be considered to ensure optimal health and safety for their infants.

Studies on rate equations for defects in irradiated solids using the local analysis method

International Nuclear Information System (INIS)

Carvalho e Camargo, M.U. de.

1983-10-01

The void formation and swelling phenomenon in material for nuclear reactors structures, mainly for fast reactors, has been studied by several authors. A simple calculation covering the basic instance of radiation damage in irradiated solid solution, using the local analysis in rate theory is presented here. A simple description of pratical and fundamental interest for the complex problem of solid solution under irradiation is given. (Author) [pt

Optimization of solid state anaerobic digestion of the OFMSW by digestate recirculation: A new approach

International Nuclear Information System (INIS)

Michele, Pognani; Giuliana, D’Imporzano; Carlo, Minetti; Sergio, Scotti; Fabrizio, Adani

2015-01-01

Highlights: • Solid State Anaerobic Digestion (SSAD) of OFMSW can be optimized by irrigation with digestate. • Digestate spreading allows keeping optimal process parameters and high hydrolysis rate. • The 18.4% of CH 4 was produced in the reactor, leaving the 49.7% in the percolate. • Successive CSTR feed with percolate shows a biogas enriched in methane (more than 80%). • The proposed process allow producing the 68% of OFMSW potential CH 4 , getting high quality organic amendment. - Abstract: Dry anaerobic digestion (AD) of OFMSW was optimized in order to produce biogas avoiding the use of solid inoculum. Doing so the dry AD was performed irrigating the solid waste with liquid digestate (flow rate of 1:1.18–1:0.9 w/w waste/digestate; 21 d of hydraulic retention time – HRT) in order to remove fermentation products inhibiting AD process. Results indicated that a high hydrolysis rate of organic matter (OM) and partial biogas production were obtained directly during the dry AD. Hydrolysate OM was removed from digester by the percolate flow and it was subsequently used to feed a liquid anaerobic digester. During dry AD a total loss of 36.9% of total solids was recorded. Methane balance indicated that 18.4% of potential methane can be produced during dry AD and 49.7% by the percolate. Nevertheless results obtained for liquid AD digestion indicated that only 20.4% and 25.7% of potential producible methane was generated by adopting 15 and 20 days of HRT, probably due to the AD inhibition due to high presence of toxic ammonia forms in the liquid medium

Optimization of solid state anaerobic digestion of the OFMSW by digestate recirculation: A new approach

Energy Technology Data Exchange (ETDEWEB)

Michele, Pognani, E-mail: michele.pognani@unimi.it [Gruppo Ricicla – DiSAA, Università degli Studi di Milano, Soil and Env. Lab, Via Celoria, 2, 20133 Milano (Italy); Giuliana, D’Imporzano, E-mail: giuliana.dimporzano@unimi.it [Gruppo Ricicla – DiSAA, Università degli Studi di Milano, Soil and Env. Lab, Via Celoria, 2, 20133 Milano (Italy); Gruppo Ricicla - DiSAA, Università degli Studi di Milano, Biomass and Bioenergy Lab., Parco Tecnologico Padano, Via Einstein, Loc. C.na Codazza, 26900 Lodi (Italy); Carlo, Minetti, E-mail: carlo.minetti@a2a.eu [Ecodeco, a2a Group, Cascina Darsena 1, 27010 Giussago, Pavia (Italy); Sergio, Scotti, E-mail: sergio.scotti@a2a.eu [Ecodeco, a2a Group, Cascina Darsena 1, 27010 Giussago, Pavia (Italy); Fabrizio, Adani, E-mail: farbrizio.adani@unimi.it [Gruppo Ricicla – DiSAA, Università degli Studi di Milano, Soil and Env. Lab, Via Celoria, 2, 20133 Milano (Italy); Gruppo Ricicla - DiSAA, Università degli Studi di Milano, Biomass and Bioenergy Lab., Parco Tecnologico Padano, Via Einstein, Loc. C.na Codazza, 26900 Lodi (Italy)

2015-01-15

Highlights: • Solid State Anaerobic Digestion (SSAD) of OFMSW can be optimized by irrigation with digestate. • Digestate spreading allows keeping optimal process parameters and high hydrolysis rate. • The 18.4% of CH{sub 4} was produced in the reactor, leaving the 49.7% in the percolate. • Successive CSTR feed with percolate shows a biogas enriched in methane (more than 80%). • The proposed process allow producing the 68% of OFMSW potential CH{sub 4}, getting high quality organic amendment. - Abstract: Dry anaerobic digestion (AD) of OFMSW was optimized in order to produce biogas avoiding the use of solid inoculum. Doing so the dry AD was performed irrigating the solid waste with liquid digestate (flow rate of 1:1.18–1:0.9 w/w waste/digestate; 21 d of hydraulic retention time – HRT) in order to remove fermentation products inhibiting AD process. Results indicated that a high hydrolysis rate of organic matter (OM) and partial biogas production were obtained directly during the dry AD. Hydrolysate OM was removed from digester by the percolate flow and it was subsequently used to feed a liquid anaerobic digester. During dry AD a total loss of 36.9% of total solids was recorded. Methane balance indicated that 18.4% of potential methane can be produced during dry AD and 49.7% by the percolate. Nevertheless results obtained for liquid AD digestion indicated that only 20.4% and 25.7% of potential producible methane was generated by adopting 15 and 20 days of HRT, probably due to the AD inhibition due to high presence of toxic ammonia forms in the liquid medium.

Investigation of surface roughness and tool wear length with varying combination of depth of cut and feed rate of Aluminium alloy and P20 steel machining

International Nuclear Information System (INIS)

Varmma Suparmaniam, Madan; Yusoff, Ahmad Razlan

2016-01-01

High-speed milling technique is often used in many industries to boost productivity of the manufacturing of high-technology components. The occurrence of wear highly limits the efficiency and accuracy of high- speed milling operations. In this paper, analysis of high-speed milling process parameters such as material removal rate, cutting speed, feed rate and depth of cut carried out by implemented to conventional milling. This experiment investigate the effects of varying combination of depth of cut and feed rate to tool wear rate length using metallurgical microscope and surface roughness using portable surface roughness tester after end milling of Aluminium and P20 steel. Results showed that feed rate significantly influences the surface roughness value while depth of cut does not as the surface roughness value keep increasing with the increase of feed rate and decreasing depth of cut. Whereas, tool wear rate almost remain unchanged indicates that material removal rate strongly contribute the wear rate. It believe that with no significant tool wear rate the results of this experiment are useful by showing that HSM technique is possible to be applied in conventional machine with extra benefits of high productivity, eliminating semi-finishing operation and reducing tool load for finishing. (paper)

Development and characterization of solid dispersion of piroxicam for improvement of dissolution rate using hydrophilic carriers

Directory of Open Access Journals (Sweden)

Mohammad Barzegar-jalali

2014-09-01

Full Text Available Introduction: The main objective of this study was preparation and characterization of solid dispersion of piroxicam to enhance its dissolution rate. Methods: Solid dispersion formulations with different carriers including crospovidone, microcrystalline cellulose and Elaeagnus angustifolia fruit powder and with different drug: carrier ratios were prepared employing cogrinding method. Dissolution study of the piroxicam powders, physical mixtures and solid dispersions was performed in simulated gastric fluid and simulated intestinal fluid using USP Apparatus type II. The physical characterization of formulations were analyzed using powder X ray diffraction (PXRD, particle size analyzer and differential scanning calorimetry (DSC. Interactions between the drug and carriers were evaluated by Fourier transform infrared (FT-IR spectroscopic method. Results: It was revealed that all of three carriers increase the dissolution rate of piroxicam from physical mixtures and especially in solid dispersions compared to piroxicam pure and treated powders. PXRD and DSC results were confirmed the reduction of crystalline form of piroxicam. FT-IR analysis did not show any physicochemical interaction between drug and carriers in the solid dispersion formulations. Conclusion: Dissolution rate was dependent on the type and ratio of drug: carrier as well as pH of dissolution medium. Dissolution data of formulations were fitted well in to the linear Weibull as well as non-linear logistic and a suggested models.

Novel feeding strategies for Saccharomyces cerevisiae DS2155 ...

African Journals Online (AJOL)

The dual behavior of Saccharomyces cerevisiae on glucose feed as function of the dilution rate near the critical specific growth rate (ì=0.25) is a bottleneck in industrial production, hence the need for more efficient feeding strategies. In this work novel feeding strategies have been generated and evaluated. For each feeding ...

Meta-analysis on the effects of the physical environment, animal traits, feeder and feed characteristics on the feeding behaviour and performance of growing-finishing pigs.

Science.gov (United States)

Averós, X; Brossard, L; Dourmad, J Y; de Greef, K H; Edwards, S A; Meunier-Salaün, M C

2012-08-01

A meta-analysis, using information from 45 experiments on growing-finishing pigs published in 39 manuscripts, was carried out to determine the simultaneous effects of the physical environment (space allowance, group size, flooring conditions, temperature, presence of enrichment), pig traits (initial body weight (BW) for each studied time interval, sex, genetics), feeder characteristics (water provision within the feeder, feeder design (individual/collective), feeder places/pig, presence of feeder protection) and feed characteristics (feed allowance (ad libitum/restricted), net energy content, crude protein (CP) content), as well as their potential interactions, on the feeding behaviour and performance of growing-finishing pigs. The detrimental effect of low temperature on performance was particularly evident for restricted-fed pigs (P < 0.05). At reduced feeder space allowance, a reduction in the percentage of time spent eating was predicted when increasing initial BW, whereas the opposite was predicted for larger feeder space allowances (P < 0.001). The reduction in visit duration to the feeder in higher BW groups became gradually more important with increasing feeder space allowance (P < 0.01), whereas the increase in the ingestion rate and average daily feed intake (ADFI) with increasing initial BW became smaller with increasing feeder space (P < 0.05). The model predicted a reduction in feed conversion ratio (FCR) with increasing group size (P < 0.05) and floor space allowance (P < 0.01) and on solid floors with or without bedding (P < 0.05). In comparison with other feeders, wet/dry feeders were associated with more frequent but shorter feeder visits (P < 0.05), higher ingestion rates (P < 0.001) and higher ADFI (P < 0.10). The use of protection within individual feeders increased the time spent feeding (P < 0.001), reduced the number of visits per day (P < 0.01), the ingestion rate (P < 0.001) and FCR (P < 0.01) in comparison with other feeder types. Sex

Shifts in mass-scaling of respiration, feeding, and growth rates across life-form transitions in marine pelagic organisms

DEFF Research Database (Denmark)

Kiørboe, Thomas; Hirst, Andrew G.

2014-01-01

The metabolic rate of organisms may be viewed as a basic property from which other vital rates and many ecological patterns emerge and that follows a universal allometric mass scaling law, or it may be considered a property of the organism that emerges as a result of the adaptation to the environ...... and be the result of the optimization of trade-offs that allow sufficient feeding and growth rates to balance mortality...

The influence of maternal psychosocial characteristics on infant feeding styles.

Science.gov (United States)

Barrett, Katherine J; Thompson, Amanda L; Bentley, Margaret E

2016-08-01

Maternal feeding styles in infancy and early childhood are associated with children's later risk for overweight and obesity. Maternal psychosocial factors that influence feeding styles during the complementary feeding period, the time during which infants transition from a milk-based diet to one that includes solid foods and other non-milk products, have received less attention. The present study explores how maternal psychosocial factors-specifically self-esteem, parenting self-efficacy, parenting satisfaction, and depression symptoms-influence mothers' infant feeding styles at nine months of age, a time during which solid foods eating habits are being established. Participants included 160 low-income, African-American mother-infant pairs in central North Carolina who were enrolled in the Infant Care and Risk of Obesity Study. Regression models tested for associations between maternal psychosocial characteristics and pressuring and restrictive feeding styles. Models were first adjusted for maternal age, education, marital status and obesity status. To account for infant characteristics, models were then adjusted for infant weight-for-length, distress to limitations and activity level scores. Maternal self-esteem was negatively associated with pressuring to soothe. Maternal parenting self-efficacy was positively associated with restriction-diet quality. Maternal parenting satisfaction and depression symptoms were not associated with feeding styles in the final models. Focusing on strengthening maternal self-esteem and parenting self-efficacy may help to prevent the development of less desirable infant feeding styles. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evaluating Feed Delivery Performance in Scaled Double-Shell Tanks

International Nuclear Information System (INIS)

Lee, Kearn P.; Thien, Michael G.

2013-01-01

The Hanford Tank Operations Contractor (TOC) and the Hanford Waste Treatment and Immobilization Plant (WTP) contractor are both engaged in demonstrating mixing, sampling, and transfer system capability using simulated Hanford High-Level Waste (HLW) formulations. This work represents one of the remaining technical issues with the high-level waste treatment mission at Hanford. The TOCs' ability to adequately mix and sample high-level waste feed to meet the WTP WAC Data Quality Objectives must be demonstrated. The tank mixing and feed delivery must support both TOC and WTP operations. The tank mixing method must be able to remove settled solids from the tank and provide consistent feed to the WTP to facilitate waste treatment operations. Two geometrically scaled tanks were used with a broad spectrum of tank waste simulants to demonstrate that mixing using two rotating mixer jet pumps yields consistent slurry compositions as the tank is emptied in a series of sequential batch transfers. Testing showed that the concentration of slow settling solids in each transfer batch was consistent over a wide range of tank operating conditions. Although testing demonstrated that the concentration of fast settling solids decreased by up to 25% as the tank was emptied, batch-to-batch consistency improved as mixer jet nozzle velocity in the scaled tanks increased

Effect of pervaporation plate thickness on the rate of methanol evaporation in a passive vapor-feed direct methanol fuel cell

Science.gov (United States)

Fauzi, N. F. I.; Hasran, U. A.; Kamarudin, S. K.

2015-09-01

In a passive vapor-feed direct methanol fuel cell (DMFC), methanol vapor is typically obtained using a pervaporation plate in a process by which liquid methanol contained in the fuel reservoir undergoes a phase change to vapor in the anodic vapor chamber. This work investigates the effect of pervaporation plate thickness on the rate of methanol evaporation using a three-dimensional simulation model developed by varying the plate thickness. A. The rate of methanol evaporation was measured using Darcy's law. The rate of methanol evaporation was found to be inversely proportional to the plate thickness, where the decrease in thickness inevitably lowers the resistance along the plate and consequently increases the methanol transport through the plate. This shows that the plate thickness has a significant influence on the rate of methanol evaporation and thereby plays an important role in improving the performance of the passive vapor-feed direct methanol fuel cell.

Apparatus and method for determining solids circulation rate

Science.gov (United States)

Ludlow, J Christopher [Morgantown, WV; Spenik, James L [Morgantown, WV

2012-02-14

The invention relates to a method of determining bed velocity and solids circulation rate in a standpipe experiencing a moving packed bed flow, such as the in the standpipe section of a circulating bed fluidized reactor The method utilizes in-situ measurement of differential pressure over known axial lengths of the standpipe in conjunction with in-situ gas velocity measurement for a novel application of Ergun equations allowing determination of standpipe void fraction and moving packed bed velocity. The method takes advantage of the moving packed bed property of constant void fraction in order to integrate measured parameters into simultaneous solution of Ergun-based equations and conservation of mass equations across multiple sections of the standpipe.

Ultra scale-down device to predict dewatering levels of solids recovered in a continuous scroll decanter centrifuge.

Science.gov (United States)

Lopes, A G; Keshavarz-Moore, E

2013-01-01

During centrifugation operation, the major challenge in the recovery of extracellular proteins is the removal of the maximum liquid entrapped within the spaces between the settled solids-dewatering level. The ability of the scroll decanter centrifuge (SDC) to process continuously large amounts of feed material with high concentration of solids without the need for resuspension of feeds, and also to achieve relatively high dewatering, could be of great benefit for future use in the biopharmaceutical industry. However, for reliable prediction of dewatering in such a centrifuge, tests using the same kind of equipment at pilot-scale are required, which are time consuming and costly. To alleviate the need of pilot-scale trials, a novel USD device, with reduced amounts of feed (2 mL) and to be used in the laboratory, was developed to predict the dewatering levels of a SDC. To verify USD device, dewatering levels achieved were plotted against equivalent compression (Gtcomp ) and decanting (Gtdec ) times, obtained from scroll rates and feed flow rates operated at pilot-scale, respectively. The USD device was able to successfully match dewatering trends of the pilot-scale as a function of both Gtcomp and Gtdec , particularly for high cell density feeds, hence accounting for all key variables that influenced dewatering in a SDC. In addition, it accurately mimicked the maximum dewatering performance of the pilot-scale equipment. Therefore the USD device has the potential to be a useful tool at early stages of process development to gather performance data in the laboratory thus minimizing lengthy and costly runs with pilot-scale SDC. © 2013 American Institute of Chemical Engineers.

Influence of mixing and solid concentration on sodium bicarbonate secondary nucleation rate in stirred tank

Energy Technology Data Exchange (ETDEWEB)

Wylock, C.; Debaste, F.; Haut, B. [Transfers, Interfaces and Processes - Chemical Engineering Unit, ULB, Brussels (Belgium); Gutierrez, V.; Delplancke-Ogletree, M.P. [Chemicals and Materials Department, ULB, Brussels (Belgium); Cartage, T. [Solvay SA, Brussels (Belgium)

2010-09-15

This work aims to investigate the influence of the solid concentration in suspension on the contact secondary nucleation rate of sodium bicarbonate crystallization in a stirred tank crystallizer and to show the necessity of a local description of the mixing for a nucleation rate influence study. Experiments and computational fluid dynamics (CFD) simulations are realized. Crystallization kinetic parameters are extracted from experimental data using a mass distribution fitting approach. CFD and the experimental results allow identifying that a mixing property correlated with the measurements of the secondary nucleation rate in the stirred tank crystallizer appears to be the turbulent dissipation rate on the edge of the impeller. Its influence and the influence of the solid concentration in the suspension on the secondary nucleation rate are estimated by the evaluation of their exponents in a kinetic law. The obtained exponent values are then discussed qualitatively. (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Methane-free biogas for direct feeding of solid oxide fuel cells

Science.gov (United States)

Leone, P.; Lanzini, A.; Santarelli, M.; Calì, M.; Sagnelli, F.; Boulanger, A.; Scaletta, A.; Zitella, P.

This paper deals with the experimental analysis of the performance and degradation issues of a Ni-based anode-supported solid oxide fuel cell fed by a methane-free biogas from dark-anaerobic digestion of wastes by pastry and fruit shops. The biogas is produced by means of an innovative process where the biomass is fermented with a pre-treated bacteria inoculum (Clostridia) able to completely inhibit the methanization step during the fermentation process and to produce a H 2/CO 2 mixture instead of conventional CH 4/CO 2 anaerobic digested gas (bio-methane). The proposed biogas production route leads to a biogas composition which avoids the need of introducing a reformer agent into or before the SOFC anode in order to reformate it. In order to analyse the complete behaviour of a SOFC with the bio-hydrogen fuel, an experimental session with several H 2/CO 2 synthetic mixtures was performed on an anode-supported solid oxide fuel cell with a Ni-based anode. It was found that side reactions occur with such mixtures in the typical thermodynamic conditions of SOFCs (650-800 °C), which have an effect especially at high currents, due to the shift to a mixture consisting of hydrogen, carbon monoxide, carbon dioxide and water. However, cells operated with acceptable performance and carbon deposits (typical of a traditional hydrocarbon-containing biogas) were avoided after 50 h of cell operation even at 650 °C. Experiments were also performed with traditional bio-methane from anaerobic digestion with 60/40 vol% of composition. It was found that the cell performance dropped after few hours of operation due to the formation of carbon deposits. A short-term test with the real as-produced biogas was also successfully performed. The cell showed an acceptable power output (at 800 °C, 0.35 W cm -2 with biogas, versus 0.55 W cm -2 with H 2) although a huge quantity of sulphur was present in the feeding fuel (hydrogen sulphide at 103 ppm and mercaptans up to 10 ppm). Therefore, it

Methane-free biogas for direct feeding of solid oxide fuel cells

Energy Technology Data Exchange (ETDEWEB)

Leone, P.; Lanzini, A.; Santarelli, M.; Cali, M. [Dipartimento di Energetica, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Turin (Italy); Sagnelli, F.; Boulanger, A.; Scaletta, A.; Zitella, P. [BioEnergy Lab, Environment Park S.p.A., Via Livorno 60, 10144 Turin (Italy)

2010-01-01

This paper deals with the experimental analysis of the performance and degradation issues of a Ni-based anode-supported solid oxide fuel cell fed by a methane-free biogas from dark-anaerobic digestion of wastes by pastry and fruit shops. The biogas is produced by means of an innovative process where the biomass is fermented with a pre-treated bacteria inoculum (Clostridia) able to completely inhibit the methanization step during the fermentation process and to produce a H{sub 2}/CO{sub 2} mixture instead of conventional CH{sub 4}/CO{sub 2} anaerobic digested gas (bio-methane). The proposed biogas production route leads to a biogas composition which avoids the need of introducing a reformer agent into or before the SOFC anode in order to reformate it. In order to analyse the complete behaviour of a SOFC with the bio-hydrogen fuel, an experimental session with several H{sub 2}/CO{sub 2} synthetic mixtures was performed on an anode-supported solid oxide fuel cell with a Ni-based anode. It was found that side reactions occur with such mixtures in the typical thermodynamic conditions of SOFCs (650-800 C), which have an effect especially at high currents, due to the shift to a mixture consisting of hydrogen, carbon monoxide, carbon dioxide and water. However, cells operated with acceptable performance and carbon deposits (typical of a traditional hydrocarbon-containing biogas) were avoided after 50 h of cell operation even at 650 C. Experiments were also performed with traditional bio-methane from anaerobic digestion with 60/40 vol% of composition. It was found that the cell performance dropped after few hours of operation due to the formation of carbon deposits. A short-term test with the real as-produced biogas was also successfully performed. The cell showed an acceptable power output (at 800 C, 0.35 W cm{sup -2} with biogas, versus 0.55 W cm{sup -2} with H{sub 2}) although a huge quantity of sulphur was present in the feeding fuel (hydrogen sulphide at 103 ppm and

Risk of solid cancer in low dose-rate radiation epidemiological studies and the dose-rate effectiveness factor.

Science.gov (United States)

Shore, Roy; Walsh, Linda; Azizova, Tamara; Rühm, Werner

2017-10-01

Estimated radiation risks used for radiation protection purposes have been based primarily on the Life Span Study (LSS) of atomic bomb survivors who received brief exposures at high dose rates, many with high doses. Information is needed regarding radiation risks from low dose-rate (LDR) exposures to low linear-energy-transfer (low-LET) radiation. We conducted a meta-analysis of LDR epidemiologic studies that provide dose-response estimates of total solid cancer risk in adulthood in comparison to corresponding LSS risks, in order to estimate a dose rate effectiveness factor (DREF). We identified 22 LDR studies with dose-response risk estimates for solid cancer after minimizing information overlap. For each study, a parallel risk estimate was derived from the LSS risk model using matching values for sex, mean ages at first exposure and attained age, targeted cancer types, and accounting for type of dosimetric assessment. For each LDR study, a ratio of the excess relative risk per Gy (ERR Gy -1 ) to the matching LSS ERR risk estimate (LDR/LSS) was calculated, and a meta-analysis of the risk ratios was conducted. The reciprocal of the resultant risk ratio provided an estimate of the DREF. The meta-analysis showed a LDR/LSS risk ratio of 0.36 (95% confidence interval [CI] 0.14, 0.57) for the 19 studies of solid cancer mortality and 0.33 (95% CI 0.13, 0.54) when three cohorts with only incidence data also were added, implying a DREF with values around 3, but statistically compatible with 2. However, the analyses were highly dominated by the Mayak worker study. When the Mayak study was excluded the LDR/LSS risk ratios increased: 1.12 (95% CI 0.40, 1.84) for mortality and 0.54 (95% CI 0.09, 0.99) for mortality + incidence, implying a lower DREF in the range of 1-2. Meta-analyses that included only cohorts in which the mean dose was LDR data provide direct evidence regarding risk from exposures at low dose rates as an important complement to the LSS risk estimates used

Effect of Ochratoxin A on Body Weight, Feed Intake and Feed Conversion in Broiler Chicken

Directory of Open Access Journals (Sweden)

Sigamani Masilamani Sakthivelan

2010-01-01

Full Text Available The effect of ochratoxin A (OA on the body weight, feed intake, and feed conversion was investigated in broiler chicken fed dietary levels of OA at 0, 1, and 2 ppm for 28 days from hatch. Feeding OA significantly reduced the growth rate of broiler chicken. The reduction was observed from the first week onwards in OA-treated groups. Feed consumption and feed conversion also showed a diminishing trend from the first week of feeding toxin. Its implication on the performance of broiler chicken is discussed.

Effect of protein provision via milk replacer or solid feed on protein metabolism in veal calves

DEFF Research Database (Denmark)

Berends, H.; van den Borne, J. J G C; Røjen, B. A.

2015-01-01

recycling but urea reused for anabolism remained unaffected. Total-tract neutral detergent fiber digestibility decreased (-9%) with increasing low-N SF intake, indicating reduced rumen fermentation. Increasing the N content of SF at equal total N intake resulted in decreased urea production, excretion......The current study evaluated the effects of protein provision to calves fed a combination of solid feed (SF) and milk replacer (MR) at equal total N intake on urea recycling and N retention. Nitrogen balance traits and [15N2]urea kinetics were measured in 30 calves (23 wk of age, 180±3.7kg of body...... of calves for 5 d, and for the assessment of urea recycling from [15N2]urea kinetics. Increasing low-N SF intake at equal total N intake resulted in a shift from urinary to fecal N excretion but did not affect protein retention (0.71g of N·kg of BW-0.75·d-1). Increasing low-N SF intake increased urea...

Urea recycling contributes to nitrogen retention in calves fed milk replacer and low-protein solid feed

DEFF Research Database (Denmark)

Berends, Harma; van den Borne, Joost J G C; Røjen, Betina A.

2014-01-01

Urea recycling, with urea originating from catabolism of amino acids and hepatic detoxification of ammonia, is particularly relevant for ruminant animals, in which microbial protein contributes substantially to the metabolizable protein supply. However, the quantitative contribution of urea...... recycling to protein anabolism in calves during the transition from preruminants (milk-fed calves) to ruminants [solid feed (SF)-fed calves] is unknown. The aim of this study was to quantify urea recycling in milk-fed calves when provided with low-protein SF. Forty-eight calves [164 ± 1.6 kg body weight (BW......)] were assigned to 1 of 4 SF levels [0, 9, 18, and 27 g of dry matter (DM) SF · kg BW2-0.75 . d-1] provided in addition to an identical amount of milk replacer. Urea recycling was quantified after a 24-h intravenous infusion of [15N2]urea by analyzing urea isotopomers in 68-h fecal and urinary...

Metabolic rate of spiders (Pardosa prativage) feed on prey species of different diet quality measured by colorimetry

DEFF Research Database (Denmark)

Nielsen, Søren Achim; Kynde, Bjarke; Westh, Peter

The metabolic rate was measured in the wolf spider Pardosa prativaga after preying different species of aphids, collembolans and fruit flies raised on common commercial medium. The activity of detoxification enzyme systems Glutathione S-Transferase (GST), Glutathione Peroxidase (GSTpx) was invest......The metabolic rate was measured in the wolf spider Pardosa prativaga after preying different species of aphids, collembolans and fruit flies raised on common commercial medium. The activity of detoxification enzyme systems Glutathione S-Transferase (GST), Glutathione Peroxidase (GSTpx......) was investigated for spiders preying the different species. The heat production of starved P. prativaga was ca. 1.5 mW per mg fresh weight. For specimens feed on fruit flies (Drosophila melanogaster) the heat production was appreciable higher whereas feed on the aphids Sitobion avenae and Rhopalosiphum padi...... the heat production was on the same level or lower than in the staved spiders. The variation of the observed metabolic changes was in concordance with the variations in enzyme activities....

Pressuring and restrictive feeding styles influence infant feeding and size among a low-income African-American sample.

Science.gov (United States)

Thompson, Amanda L; Adair, Linda S; Bentley, Margaret E

2013-03-01

The prevalence of overweight among infants and toddlers has increased dramatically in the past three decades, highlighting the importance of identifying factors contributing to early excess weight gain, particularly in high-risk groups. Parental feeding styles and the attitudes and behaviors that characterize parental approaches to maintaining or modifying children's eating behavior are an important behavioral component shaping early obesity risk. Using longitudinal data from the Infant Care and Risk of Obesity Study, a cohort study of 217 African-American mother-infant pairs with feeding styles, dietary recalls, and anthropometry collected from 3 to 18 months of infant age, we examined the relationship between feeding styles, infant diet, and weight-for-age and sum of skinfolds. Longitudinal mixed models indicated that higher pressuring and indulgent feeding style scores were positively associated with greater infant energy intake, reduced odds of breastfeeding, and higher levels of age-inappropriate feeding of liquids and solids, whereas restrictive feeding styles were associated with lower energy intake, higher odds of breastfeeding, and reduced odds of inappropriate feeding. Pressuring and restriction were also oppositely related to infant size with pressuring associated with lower infant weight-for-age and restriction with higher weight-for-age and sum of skinfolds. Infant size also predicted maternal feeding styles in subsequent visits indicating that the relationship between size and feeding styles is likely bidirectional. Our results suggest that the degree to which parents are pressuring or restrictive during feeding shapes the early feeding environment and, consequently, may be an important environmental factor in the development of obesity. Copyright © 2012 The Obesity Society.

The effect of compensatory growth on feed intake, growth rate and ...

African Journals Online (AJOL)

in feed utilization from the 0,65 and to the ad libitum group. More severe restrictions ... to manage his animals at the lowest possible cost. Normally after a time of feed ... tory growth can be explained in terms of a reduction of maintenance ...

Breast-feeding and complementary feeding practices in the first 6 months of life among Norwegian-Somali and Norwegian-Iraqi infants: the InnBaKost survey.

Science.gov (United States)

Grewal, Navnit Kaur; Andersen, Lene Frost; Sellen, Daniel; Mosdøl, Annhild; Torheim, Liv Elin

2016-03-01

To examine breast-feeding and complementary feeding practices during the first 6 months of life among Norwegian infants of Somali and Iraqi family origin. A cross-sectional survey was performed during March 2013-February 2014. Data were collected using a semi-quantitative FFQ adapted from the second Norwegian national dietary survey among infants in 2006-2007. Somali-born and Iraqi-born mothers living in eastern Norway were invited to participate. One hundred and seven mothers/infants of Somali origin and eighty mothers/infants of Iraqi origin participated. Breast-feeding was almost universally initiated after birth. Only 7 % of Norwegian-Somali and 10 % of Norwegian-Iraqi infants were exclusively breast-fed at 4 months of age. By 1 month of age, water had been introduced to 30 % of Norwegian-Somali and 26 % of Norwegian-Iraqi infants, and infant formula to 44 % and 34 %, respectively. Fifty-four per cent of Norwegian-Somali and 68 % of Norwegian-Iraqi infants had been introduced to solid or semi-solid foods at 4 months of age. Breast-feeding at 6 months of age was more common among Norwegian-Somali infants (79 %) compared with Norwegian-Iraqi infants (58 %; P=0·001). Multivariate analyses indicated no significant factors associated with exclusive breast-feeding at 3·5 months of age. Factors positively associated with breast-feeding at 6 months were country of origin (Somalia) and parity (>2). Breast-feeding initiation was common among Iraqi-born and Somali-born mothers, but the exclusive breast-feeding period was shorter than recommended in both groups. The study suggests that there is a need for new culture-specific approaches to support exclusive breast-feeding and complementary feeding practices among foreign-born mothers living in Norway.

Non-linear analysis of solid propellant burning rate behavior

Energy Technology Data Exchange (ETDEWEB)

Junye Wang [Zhejiang Univ. of Technology, College of Mechanical and Electrical Engineering, Hanzhou (China)

2000-07-01

The parametric analysis of the thermal wave model of the non-steady combustion of solid propellants is carried out under a sudden compression. First, to observe non-linear effects, solutions are obtained using a computer under prescribed pressure variations. Then, the effects of rearranging the spatial mesh, additional points, and the time step on numerical solutions are evaluated. Finally, the behaviour of the thermal wave combustion model is examined under large heat releases (H) and a dynamic factor ({beta}). The numerical predictions show that (1) the effect of a dynamic factor ({beta}), related to the magnitude of dp/dt, on the peak burning rate increases as the value of beta increases. However, unsteady burning rate 'runaway' does not appear and will return asymptotically to ap{sup n}, when {beta}{>=}10.0. The burning rate 'runaway' is a numerical difficulty, not a solution to the models. (2) At constant beta and m, the amplitude of the burning rate increases with increasing H. However, the increase in the burning rate amplitude is stepwise, and there is no apparent intrinsic instability limit. A damped oscillation of burning rate occurs when the value of H is less. However, when H>1.0, the state of an intrinsically unstable model is composed of repeated, amplitude spikes, i.e. an undamped oscillation occurs. (3) The effect of the time step on the peak burning rate increases as H increases. (Author)

Effect of Chamber Pressurization Rate on Combustion and Propagation of Solid Propellant Cracks

Science.gov (United States)

Yuan, Wei-Lan; Wei, Shen; Yuan, Shu-Shen

2002-01-01

area of the propellant grain satisfies the designed value. But cracks in propellant grain can be generated during manufacture, storage, handing and so on. The cracks can provide additional surface area for combustion. The additional combustion may significantly deviate the performance of the rocket motor from the designed conditions, even lead to explosive catastrophe. Therefore a thorough study on the combustion, propagation and fracture of solid propellant cracks must be conducted. This paper takes an isolated propellant crack as the object and studies the effect of chamber pressurization rate on the combustion, propagation and fracture of the crack by experiment and theoretical calculation. deformable, the burning inside a solid propellant crack is a coupling of solid mechanics and combustion dynamics. In this paper, a theoretical model describing the combustion, propagation and fracture of the crack was formulated and solved numerically. The interaction of structural deformation and combustion process was included in the theoretical model. The conservation equations for compressible fluid flow, the equation of state for perfect gas, the heat conducting equation for the solid-phase, constitutive equation for propellant, J-integral fracture criterion and so on are used in the model. The convective burning inside the crack and the propagation and fracture of the crack were numerically studied by solving the set of nonlinear, inhomogeneous gas-phase governing equations and solid-phase equations. On the other hand, the combustion experiments for propellant specimens with a precut crack were conducted by RTR system. Predicted results are in good agreement with experimental data, which validates the reasonableness of the theoretical model. Both theoretical and experimental results indicate that the chamber pressurization rate has strong effects on the convective burning in the crack, crack fracture initiation and fracture pattern.

Feeding and eating disorders in the DSM-5 era: a systematic review of prevalence rates in non-clinical male and female samples.

Science.gov (United States)

Lindvall Dahlgren, Camilla; Wisting, Line; Rø, Øyvind

2017-01-01

The objective of this study was to systematically review the literature on the prevalence of eating disorders (EDs) during the DSM-5 era, and to report rates of point- and lifetime prevalence. A PubMed search was conducted targeting articles on the epidemiology of EDs, in particular, reported rates of prevalence. The review was performed in accordance with PRISMA guidelines, and was limited to DSM-5 based eating disorder diagnoses published between 2012 and 2017. A total of 19 studies fulfilled inclusion criteria and were included in the study. Following the transition to DSM-5, it is evident that the prevalence of eating disorder not otherwise specified (EDNOS)/other specified feeding and eating disorders (OSFED) has decreased as intended, and there is preliminary evidence suggesting that rates of anorexia nervosa (AN) and bulimia nervosa (BN) and binge eating disorder (BED) have increased. Further, we observed higher rates of BED prevalence among females compared to males, with rates increasing with age. A limitation to the study was the search date, and that none of the included studies investigated the "new" DSM-5 feeding disorders avoidant restrictive food intake disorder (ARFID), pica or rumination disorder warranting attention in future studies investigating the epidemiology of feeding and eating disorders.

Effect of pervaporation plate thickness on the rate of methanol evaporation in a passive vapor-feed direct methanol fuel cell

International Nuclear Information System (INIS)

Fauzi, N F I; Hasran, U A; Kamarudin, S K

2015-01-01

In a passive vapor-feed direct methanol fuel cell (DMFC), methanol vapor is typically obtained using a pervaporation plate in a process by which liquid methanol contained in the fuel reservoir undergoes a phase change to vapor in the anodic vapor chamber. This work investigates the effect of pervaporation plate thickness on the rate of methanol evaporation using a three-dimensional simulation model developed by varying the plate thickness. A. The rate of methanol evaporation was measured using Darcy's law. The rate of methanol evaporation was found to be inversely proportional to the plate thickness, where the decrease in thickness inevitably lowers the resistance along the plate and consequently increases the methanol transport through the plate. This shows that the plate thickness has a significant influence on the rate of methanol evaporation and thereby plays an important role in improving the performance of the passive vapor-feed direct methanol fuel cell. (paper)

Humid storage conditions increase the dissolution rate of diazepam from solid dispersions prepared by melt agglomeration

DEFF Research Database (Denmark)

Jørgensen, Anna Cecilia; Torstenson, Anette Seo

2008-01-01

The purpose of this study is to investigate the effect of cooling mode and storage conditions on the dissolution rate of a solid dispersion prepared by melt agglomeration. The aim has been to relate this effect to the solid state properties of the agglomerates. The cooling mode had an effect on t...

Solid fuel feed system for a fluidized bed

Science.gov (United States)

Jones, Brian C.

1982-01-01

A fluidized bed for the combustion of coal, with limestone, is replenished with crushed coal from a system discharging the coal laterally from a station below the surface level of the bed. A compartment, or feed box, is mounted at one side of the bed and its interior separated from the bed by a weir plate beneath which the coal flows laterally into the bed while bed material is received into the compartment above the plate to maintain a predetermined minimum level of material in the compartment.

Experimental study on composite solid propellant material burning rate using algorithm MATLAB

Directory of Open Access Journals (Sweden)

Thunaipragasam Selvakumaran

2016-01-01

Full Text Available In rocketry application, now-a-days instead of monopropellants slowly composite propellants are introduced. Burning rate of a solid state composite propellant depends on many factors like oxidizer-binder ratio, oxidizer particle size and distribution, particle size and its distribution, pressure, temperature, etc. Several researchers had taken the mass varied composite propellant. In that, the ammonium perchlorate mainly varied from 85 to 90%. This paper deals with the oxidizer rich propellant by allowing small variation of fuel cum binder ranging from 2%, 4%, 6%, and 8% by mass. Since the percent of the binder is very less compared to the oxidizer, the mixture remains in a powder form. The powder samples are used to make a pressed pellet. Experiments were conducted in closed window bomb set-up at pressures of 2, 3.5, and 7 MN/m2. The burning rates are calculated from the combustion photography (images taken by a high-speed camera. These images were processed frame by frame in MATLAB, detecting the edges in the images of the frames. The burning rate is obtained as the slope of the linear fit from MATLAB and observed that the burn rate increases with the mass variation of constituents present in solid state composite propellant. The result indicates a remarkable increase in burn rate of 26.66%, 20%, 16.66%, and 3.33% for Mix 1, 2, 3, 4 compared with Mix 5 at 7 MN/m2. The percentage variations in burn rate between Mix 1 and Mix 5 at 2, 3.5, and 7 MN/m2 are 25.833%, 32.322%, and 26.185%, respectively.

Determination of emamectin benzoate in medicated fish feed.

Science.gov (United States)

Farer, L J; Hayes, J; Rosen, J; Knight, P

1999-01-01

A method was developed to quantitate emamectin benzoate in fish feed at levels between 5 and 15 ppm. The active ingredient is extracted from 20 g medicated feed into aqueous-methanolic solvent by overnight shaking. A solid-phase extraction procedure using a 2 g C18 cartridge is then used to concentrate the active residue and remove interfering matrix components. The extracted drug and internal standard are eluted from the cartridge, evaporated to dryness, and reconstituted in methanol. A control feed sample and fortified control working standard are simultaneously prepared. Remaining interferences and sample analysis are further separated on a gradient liquid chromatographic system. Recovery of emamectin benzoate from fortified feeds ranged from 97 to 100%, with a coefficient of variation (CV) of 1.2%. Determination of emamectin benzoate in medicated feeds resulted in CVs ranging from 2.3 to 4.2% and recoveries of 88 to 98% of label claim.

Exploring infant feeding practices: cross-sectional surveys of South Western Sydney, Singapore, and Ho Chi Minh City.

Science.gov (United States)

Leow, Timothy Yong Qun; Ung, Andrew; Qian, Shelley; Nguyen, Jessie Thanh; An, Yvonne; Mudgil, Poonam; Whitehall, John

2017-06-13

Infant feeding practices are known to influence the child's long-term health. Studies have associated obesity and other diseases with reduced breastfeeding and early introduction of high calorie beverages (HCBs). The rising prevalence of obesity is already a problem in most developed countries, especially Australia, but cultural differences are influential. Our aim is to examine and compare infant feeding practices and educational levels of respondents through questionnaires in three culturally different sites: Campbelltown (South Western Sydney), Australia, Singapore and Ho Chi Minh City, Vietnam (HCMC). Consenting parents and carers (aged ≥18 years old) of at least one child (≤6 years old) were recruited from paediatric clinics in Campbelltown, Singapore and HCMC. Participants completed an infant feeding practices questionnaire regarding breastfeeding, beverage and solid initiation in addition to the parent's ethnicity, age, and educational level. Data was analysed quantitatively using SPSS. Two hundred eighty-three participants were recruited across the three sites, HCMC (n = 84), Campbelltown (n = 108), and Singapore (n = 91). 237 (82.6%) children were breastfed but in all only 100 (60.2%) were exclusively breastfed for five months or more. There was a statistical difference in rates of breast feeding between each region. HCMC (n = 18, 21.4%) had the lowest, followed by Campbelltown (n = 35, 32.4%), and then Singapore (n = 47, 51.7%). There was also a difference in rates of introduction of HCBs by 3 years of age, with those in HCMC (n = 71, 84.5%) were higher than Campbelltown (n = 71, 65.8%) and Singapore (n = 48, 52.8%). The educational level of respondents was lower in Vietnam where only 46.4% (n = 39) had completed post-secondary education, compared to 75.0% (n = 81) in Campbelltown and 75.8% (n = 69) in Singapore. Rates of breast feeding were inversely correlated with rates of introduction of HCB and positively related to

Microbial community structures in high rate algae ponds for bioconversion of agricultural wastes from livestock industry for feed production.

Science.gov (United States)

Mark Ibekwe, A; Murinda, Shelton E; Murry, Marcia A; Schwartz, Gregory; Lundquist, Trygve

2017-02-15

Dynamics of seasonal microbial community compositions in algae cultivation ponds are complex. However, there is very limited knowledge on bacterial communities that may play significant roles with algae in the bioconversion of manure nutrients to animal feed. In this study, water samples were collected during winter, spring, summer, and fall from the dairy lagoon effluent (DLE), high rate algae ponds (HRAP) that were fed with diluted DLE, and municipal waste water treatment plant (WWTP) effluent which was included as a comparison system for the analysis of total bacteria, Cyanobacteria, and microalgae communities using MiSeq Illumina sequencing targeting the 16S V4 rDNA region. The main objective was to examine dynamics in microbial community composition in the HRAP used for the production of algal biomass. DNA was extracted from the different sample types using three commercially available DNA extraction kits; MoBio Power water extraction kit, Zymo fungi/bacterial extraction kit, and MP Biomedicals FastDNA SPIN Kit. Permutational analysis of variance (PERMANOVA) using distance matrices on each variable showed significant differences (P=0.001) in beta-diversity based on sample source. Environmental variables such as hydraulic retention time (HRT; P<0.031), total N (P<0.002), total inorganic N (P<0.002), total P (P<0.002), alkalinity (P<0.002), pH (P<0.022), total suspended solid (TSS; P<0.003), and volatile suspended solids (VSS; P<0.002) significantly affected microbial communities in DLE, HRAP, and WWTP. Of the operational taxonomic units (OTUs) identified to phyla level, the dominant classes of bacteria identified were: Cyanobacteria, Alpha-, Beta-, Gamma-, Epsilon-, and Delta-proteobacteria, Bacteroidetes, Firmicutes, and Planctomycetes. Our data suggest that microbial communities were significantly affected in HRAP by different environmental variables, and care must be taken in extraction procedures when evaluating specific groups of microbial communities for

Strontium Zirconate TBC Sprayed by a High Feed-Rate Water-Stabilized Plasma Torch

Science.gov (United States)

Ctibor, P.; Nevrla, B.; Cizek, J.; Lukac, F.

2017-12-01

A novel thermal barrier coating (TBC) material, strontium zirconate SrZrO3, was sprayed by a high feed-rate water-stabilized plasma torch WSP 500. Stainless steel coupons were used as substrates. Coatings with a thickness of about 1.2 mm were produced, whereas the substrates were preheated over 450 °C. The torch worked at 150 kW power and was able to spray SrZrO3 with a high spray rate over 10 kg per hour. Microstructure and microhardness, phase composition, adhesion, thermal conductivity and thermal expansion were evaluated. The coating has low thermal conductivity under 1 W/m K in the interval from room temperature up to 1200 °C. Its crystallite size is slightly over 400 nm and thermal expansion 12.3 µm K-1 in the similar temperature range.

Feeding response of Aedes aegypti and Anopheles dirus (Diptera: Culicidae) using out-of-date human blood in a membrane feeding apparatus.

Science.gov (United States)

Pothikasikorn, Jinrapa; Boonplueang, Rapee; Suebsaeng, Chalermchai; Khaengraeng, Rungpetch; Chareonviriyaphap, Theeraphap

2010-06-01

The colonization of Aedes aegypti and Anopheles dirus was performed using out-of-date human blood from a blood bank as a nutritional supply dispensed from a common artificial feeder. Preserved human blood was collected and used for feeding on days 5, 15, and 25 after date of expiration and dispensed from a common artificial feeder to rear the mosquitoes. Ae. aegypti had a feeding rate of 78.7, 62, and 18% at the respective intervals while An. dirus had a rate of 80, 56.8, and 7.3% on the same respective days. Direct feeding on live hamsters resulted in a rate of 96 and 90% for Ae. aegypti and An. dirus, respectively. Although egg production rates decreased from the day 5 feeding to the day 25 feeding, all of the developmental stages resulting from An. dirus fed at day 5 and 15 showed insignificant differences when compared with direct feeding on the blood of a hamster.

Fluidized Bed Reactor as Solid State Fermenter

Directory of Open Access Journals (Sweden)

Krishnaiah, K.

2005-01-01

Full Text Available Various reactors such as tray, packed bed, rotating drum can be used for solid-state fermentation. In this paper the possibility of fluidized bed reactor as solid-state fermenter is considered. The design parameters, which affect the performances are identified and discussed. This information, in general can be used in the design and the development of an efficient fluidized bed solid-state fermenter. However, the objective here is to develop fluidized bed solid-state fermenter for palm kernel cake conversion into enriched animal and poultry feed.

Effect of feed presentation on feeding patterns of dairy calves.

Science.gov (United States)

Miller-Cushon, E K; Bergeron, R; Leslie, K E; Mason, G J; DeVries, T J

2013-01-01

The objectives of this study were to determine the effect of feed presentation on meal frequency and duration, as well as diurnal feeding patterns of dairy calves, and to assess any longer-term differences in feeding patterns resulting from previous experience. Twenty Holstein bull calves were exposed from wk 1 to 8 of life to 1 of 2 feed presentation treatments: concentrate and chopped grass hay (Feed was provided ad libitum. Calves received 8L/d of milk replacer (1.2 kg of dry matter), with the amount progressively reduced after 5 wk to facilitate weaning by the end of wk 7. At the beginning of wk 9, all calves received the MIX diet and remained on trial for an additional 3 wk. Feeding behavior was recorded from video for 4d during wk 6, 8, 9, and 11. In wk 6, calves fed MIX spent more time feeding than calves fed COM (56.7 vs. 46.8 min/d). In wk 8, calves fed MIX spent more time feeding (174.0 vs. 139.1 min/d) and had a lower rate of intake (11.5 vs. 14.7 g/min) compared with calves fed COM. Meal frequency was similar between treatments (12.2 meals/d). Diurnal feeding patterns in wk 8 were also affected by feed presentation, with calves fed MIX spending less time feeding at time of feed delivery and more time feeding throughout the rest of the daylight hours than calves fed COM. Diurnal feeding patterns of hay and concentrate in wk 8 differed for calves fed COM, with more time spent consuming hay at time of feed delivery and less time spent consuming hay throughout the rest of the day. Once calves previously fed COM were transitioned to the MIX diet in wk 9, meal frequency, meal duration, and diurnal feeding patterns were similar between treatments: both treatments spent similar amounts of time feeding (173.9 min/d) and had similar peaks in feeding activity at time of feed delivery, sunrise, and sunset. Provision of hay and concentrate to young calves as a mixed ration, compared with separate components, increases time spent feeding and results in more evenly

An empirical model for prediction of household solid waste generation rate - A case study of Dhanbad, India.

Science.gov (United States)

Kumar, Atul; Samadder, S R

2017-10-01

Accurate prediction of the quantity of household solid waste generation is very much essential for effective management of municipal solid waste (MSW). In actual practice, modelling methods are often found useful for precise prediction of MSW generation rate. In this study, two models have been proposed that established the relationships between the household solid waste generation rate and the socioeconomic parameters, such as household size, total family income, education, occupation and fuel used in the kitchen. Multiple linear regression technique was applied to develop the two models, one for the prediction of biodegradable MSW generation rate and the other for non-biodegradable MSW generation rate for individual households of the city Dhanbad, India. The results of the two models showed that the coefficient of determinations (R 2 ) were 0.782 for biodegradable waste generation rate and 0.676 for non-biodegradable waste generation rate using the selected independent variables. The accuracy tests of the developed models showed convincing results, as the predicted values were very close to the observed values. Validation of the developed models with a new set of data indicated a good fit for actual prediction purpose with predicted R 2 values of 0.76 and 0.64 for biodegradable and non-biodegradable MSW generation rate respectively. Copyright © 2017 Elsevier Ltd. All rights reserved.

Corn fiber hulls as a food additive or animal feed

Science.gov (United States)

Abbas, Charles; Beery, Kyle E.; Cecava, Michael J.; Doane, Perry H.

2010-12-21

The present invention provides a novel animal feed or food additive that may be made from thermochemically hydrolyzed, solvent-extracted corn fiber hulls. The animal feed or food additive may be made, for instance, by thermochemically treating corn fiber hulls to hydrolyze and solubilize the hemicellulose and starch present in the corn fiber hulls to oligosaccharides. The residue may be extracted with a solvent to separate the oil from the corn fiber, leaving a solid residue that may be prepared, for instance by aggolmerating, and sold as a food additive or an animal feed.

Recovery of methane-rich gas from solid-feed anaerobic digestion of ipomoea (Ipomoea carnea).

Science.gov (United States)

Sankar Ganesh, P; Sanjeevi, R; Gajalakshmi, S; Ramasamy, E V; Abbasi, S A

2008-03-01

Studies are presented on new types of anaerobic digesters in which chopped or dry crushed Ipomoea carnea was fed without any other pretreatment, in an attempt to develop commercially viable means of utilizing the otherwise very harmful plant. Two types of solid-feed anaerobic digesters (SFADs) were studied. The first type had a single vessel in which the bottom 35% portion was separated from the top portion by a perforated PVC disk. The weed was charged from the top and inoculated with anaerobically digested cowdung-water slurry. The fermentation of the weed in the reactor led to the formation of volatile fatty acids (VFAs) plus some biogas. The leachate, rich in the VFAs, was passed through the perforated PVC sheet and collected in the lower portion of the vessel. The other type of reactors had two vessels, the first one was fully charged with the weed and the second received the VFA leachate. With both types were attached upflow anaerobic filters (UAFs) which converted the leachate into combustible biogas consisting of approximately 70% methane. All SFADs developed very consistent performance in terms of biogas yield within 17 weeks of start. The two-compartment reactors yielded significantly more biogas than the single-compartment reactors of corresponding total volume, and the reactors with which anaerobic filters (AF) were attached yielded more biogas than the ones without AF. The best performing units generated 2.41m(3) of biogas per m(3) of digester volume, as compared to 0.1-0.2m(3) of biogas, m(-3)d(-1), obtainable with conventional digesters. This indicates the viability of this technology. The spent weed can be vermicomposted directly to obtain good soil-conditioner cum fertilizer; earthworm Eudrilus eugeniae produced 540mg vermicast per animal every day, achieving near total conversion of feed to vermicast in 20 days. The proposed systems, thus, makes it possible to accomplish total utilization of ipomoea.

New principle of feeding for flash evaporation MOCVD devices

International Nuclear Information System (INIS)

Kaul, A.R.; Seleznev, B.V.

1993-01-01

A novel scheme of flash evaporation feeding for MOCVD processes of multi-component oxide films deposition is proposed. The scheme comprises 1) microdozage of organic solution of solid volatile precursors on the glass fiber belt, 2) evaporation of the solvent and 3) flash evaporation of MOC microdoses from the belt. The functioning of the designed feeder is described and the features of proposed scheme in comparison to existing feeding principles are discussed. (orig.)

Biogasification of solid wastes by two-phase anaerobic fermentation

International Nuclear Information System (INIS)

Ghosh, S.; Vieitez, E.R.; Liu, T.; Kato, Y.

1997-01-01

Municipal, industrial and agricultural solid wastes, and biomass deposits, cause large-scale pollution of land and water. Gaseous products of waste decomposition pollute the air and contribute to global warming. This paper describes the development of a two-phase fermentation system that alleviates methanogenic inhibition encountered with high-solids feed, accelerates methane fermentation of the solid bed, and captures methane (renewable energy) for captive use to reduce global warming. The innovative system consisted of a solid bed reactor packed with simulated solid waste at a density of 160 kg/m 3 and operated with recirculation of the percolated culture (bioleachate) through the bed. A rapid onset of solids hydrolysis, acidification, denitrification and hydrogen gas formation was observed under these operating conditions. However, these fermentative reactions stopped at a total fatty acids concentration of 13,000 mg/l (as acetic) at pH 5, with a reactor head-gas composition of 75 percent carbon dioxide, 20 percent nitrogen, 2 percent hydrogen and 3 percent methane. Fermentation inhibition was alleviated by moving the bioleachate to a separate methane-phase fermenter, and recycling methanogenic effluents at pH 7 to the solid bed. Coupled operation of the two reactors promoted methanogenic conversion of the high-solids feed. (author)

Formation and filtration characteristics of solids generated in a high level liquid waste treatment process. Filtration characteristics of solids formed in simulated high level liquid waste

International Nuclear Information System (INIS)

Kondo, Y.; Kubota, M.

1997-01-01

The filtration characteristics of solids generated in a simulated high level liquid waste (HLLW) were experimentally examined, when the simulated HLLW was processed according to the ordinary way of actual HLLW treatment process. The filtration characteristics of solids depended on the particle size. The phosphomolybdic acid, which was very fine particle with about 0.1 μm diameter, made slurry a 'difficult-to-filter' slurry, if the phosphomolybdic acid content (wt%) to the whole solids in a slurry exceeded 50wt%. On the contrary, the zirconium compounds (zirconium molybdate and zirconium telluride) had positive effect on filtration characteristics because of their relatively large particle size of about 3 to 5 μm. When the zirconium compounds content was above 50 wt%, slurry became a 'easy-to-filter' slurry. A centrifugal sedimentation was discussed as a solid/liquid separation technique for very fine particles such as phosphomolybdic acid. The theoretical feed flow rate corresponded to 0.1 μm diameter particles was about 20 1/h at the centrifugal acceleration of about 8000 G. (author)

Bed models for solid fuel conversion process in grate-fired boilers

DEFF Research Database (Denmark)

Costa, M.; Massarotti, N.; Indrizzi, V.

2013-01-01

-chemical processes are divided in two successive sections: drying and conversion (which includes pyrolysis, gasification and combustion). The second model is an empirical 1D approach. The two models need input data such as composition, temperature and feeding rate of biomass and primary air. Temperature, species...... to describe the thermo-chemical conversion process of a solid fuel bed in a grate-fired boiler is presented. In this work both models consider the incoming solid fuel as subjected to drying, pyrolysis, gasification and combustion. In the first approach the biomass bed is treated as a 0D system, but the thermo...... concentrations and velocity of the producer gas leaving the fuel bed provided by the two models are compared. A sensitivity analysis with respect to mass flow rate of the primary air is also performed, as well as a further comparison regarding the dependence of the producer gas properties on the initial moisture...

Infant feeding practices of low-income, African-American, adolescent mothers: an ecological, multigenerational perspective.

Science.gov (United States)

Bentley, M; Gavin, L; Black, M M; Teti, L

1999-10-01

The early introduction of non-milk foods among African-American infants has been well documented. Several studies report the addition of semi-solids as early as 1-2 weeks of age. This study investigated, through ethnographic, repeat indepth interviews with teen mothers and grandmothers of infants, the determinants of such feeding practices and the inter-generational factors involved in infant feeding decision-making. Nineteen adolescent mothers were recruited from Baltimore City WIC programs. The teen mothers were interviewed in their homes during four separate visits and the grandmothers at least twice. Ethnographic field guides focused on questions about what, why and how infants were fed and on the 'ethnotheories' of parenting and infant care in this population. All interviews were taped and transcripts were analyzed using text retrieval software. Results confirmed that it is the cultural norm to feed cereal in the bottle and to feed other semi-solid foods within the first month of life. Most grandmothers played the dominant role in deciding what the infant should eat and the timing of the introduction of solids. This pattern occurred both because grandmothers had extensive physical access to their grandchildren and because teen mothers were dependent upon grandmothers. The use of qualitative research methods, with an ecological, multi-generational focus, provides a rich description of the context within which infant feeding decisions are made.

Vermicomposting of source-separated human faeces by Eisenia fetida: effect of stocking density on feed consumption rate, growth characteristics and vermicompost production.

Science.gov (United States)

Yadav, Kunwar D; Tare, Vinod; Ahammed, M Mansoor

2011-06-01

The main objective of the present study was to determine the optimum stocking density for feed consumption rate, biomass growth and reproduction of earthworm Eisenia fetida as well as determining and characterising vermicompost quantity and product, respectively, during vermicomposting of source-separated human faeces. For this, a number of experiments spanning up to 3 months were conducted using soil and vermicompost as support materials. Stocking density in the range of 0.25-5.00 kg/m(2) was employed in different tests. The results showed that 0.40-0.45 kg-feed/kg-worm/day was the maximum feed consumption rate by E. fetida in human faeces. The optimum stocking densities were 3.00 kg/m(2) for bioconversion of human faeces to vermicompost, and 0.50 kg/m(2) for earthworm biomass growth and reproduction. Copyright © 2011 Elsevier Ltd. All rights reserved.

Physicochemical Characteristics, in Vitro Fermentation Indicators, Gas Production Kinetics, and Degradability of Solid Herbal Waste as Alternative Feed Source for Ruminants

Directory of Open Access Journals (Sweden)

A. N. Kisworo

2017-08-01

Full Text Available The aims of this research were to study the nutrient and secondary metabolite contents of solid herbal wastes (SHW that were preserved by freeze drying, sun drying and silage, as well as to analyze their effects on in vitro fermentation indicators i.e., gas production kinetics and degradability of solid herbal waste. Physical and chemical properties on three forms of SHW (sun dry, freeze dry, and silage were characterized and then an in vitro gas production experiment was performed to determine the kinetics of gas production, methane production, NH3, microbial protein, and SHW degradability. Polyethylene glycol (PEG was added to the three treatments to determine the biological activity of tannins. Results showed that all three preparations of SHW still contained high nutrient and plant secondary metabolite contents. Gas production, methane, NH3, microbial protein, in vitro degradability of dry matter (IVDMD and organic matter (IVDOM of SHW silage were lower (P<0.05 compared to sun dry and freeze dry. These results were apparently due to the high content of secondary metabolites especially tannin. It can be concluded that solid herbal wastes (SHW can be used as an alternative feed ingredients for ruminants with attention to the content of secondary metabolites that can affect the process of fermentation and digestibility in the rumen.

Controlled-air incineration of alpha-bearing solid wastes

International Nuclear Information System (INIS)

Koenig, R.A.; Draper, W.E.; Neuls, A.S.; Newmyer, J.M.

1980-01-01

The Los Alamos Scientific Laboratory is completing a study of controlled-air incineration (CAI) as a technique for volume reduction and stabilization of combustible transuranic-contaminated solid wastes. To demonstrate feasibility, a process has been assembled and operated on synthetic and contaminated combustibles. This paper summarizes the CAI project history, process design, provisions for radioactive operation, experimental results to date, and future plans. Achievements include operation at the design feed rate as well as combustion of separate feed compositions including cellulosics, polyethylene, polyvinyl chloride (PVC) and latex rubber. Refractory life has been satisfactory to date, with studies continuing. The offgas cleanup system has proven to be extremely effective; the final high-efficiency filters showing virtually no pressure drop increase. The ability of the system to process high concentrations of PVC has been demonstrated with no chloride-induced degradation detected. Chloride and sulfate removal from the offgas has been excellent with concentrations reaching 8 and 10 ppM maximum, respectively, in the process condensate

Stable isotope-labelled feed nutrients to assess nutrient-specific feed passage kinetics in ruminants

NARCIS (Netherlands)

Warner, D.; Dijkstra, J.; Hendriks, W.H.; Pellikaan, W.F.

2014-01-01

Knowledge of digesta passage kinetics in ruminants is essential to predict nutrient supply to the animal in relation to optimal animal performance, environmental pollution and animal health. Fractional passage rates (FPR) of feed are widely used in modern feed evaluation systems and mechanistic

A quantitative theory of solid tumor growth, metabolic rate and vascularization.

Directory of Open Access Journals (Sweden)

Alexander B Herman

Full Text Available The relationships between cellular, structural and dynamical properties of tumors have traditionally been studied separately. Here, we construct a quantitative, predictive theory of solid tumor growth, metabolic rate, vascularization and necrosis that integrates the relationships between these properties. To accomplish this, we develop a comprehensive theory that describes the interface and integration of the tumor vascular network and resource supply with the cardiovascular system of the host. Our theory enables a quantitative understanding of how cells, tissues, and vascular networks act together across multiple scales by building on recent theoretical advances in modeling both healthy vasculature and the detailed processes of angiogenesis and tumor growth. The theory explicitly relates tumor vascularization and growth to metabolic rate, and yields extensive predictions for tumor properties, including growth rates, metabolic rates, degree of necrosis, blood flow rates and vessel sizes. Besides these quantitative predictions, we explain how growth rates depend on capillary density and metabolic rate, and why similar tumors grow slower and occur less frequently in larger animals, shedding light on Peto's paradox. Various implications for potential therapeutic strategies and further research are discussed.

Study on solid-liquid two-phase unsteady flow characteristics with different flow rates in screw centrifugal pump

International Nuclear Information System (INIS)

Li, R N; Wang, H Y; Han, W; Shen, Z J; Ma, W

2013-01-01

The screw centrifugal pump is used as an object, and the unsteady numerical simulation of solid-liquid two-phase flow is carried out under different flow rate conditions in one circle by choosing the two-phase flow of sand and water as medium, using the software FLUENT based on the URANS equations, combining with sliding mesh method, and choosing the Mixture multiphase flow model and the SIMPLE algorithm. The results show that, with the flow rate increasing, the change trends for the pressure on volute outlet are almost constant, the fluctuation trends of the impeller axial force have a little change, the pressure and the axial force turn to decrease on the whole, the radial force gradually increases when the impeller maximum radius passes by half a cycle near the volute outlet, and the radial force gradually decreases when the maximum radius passes by the other half a cycle in a rotation cycle. The distributions of the solid particles are very uneven under a small flow rate condition on the face. The solid particles under a big flow rate condition are distributed more evenly than the ones under a small flow rate condition on the back. The theoretical basis and reference are provided for improving its working performance

Feeding rates, double brooding, nest reuse, and seasonal fecundity of eastern wood-pewees in the Missouri Ozarks

Science.gov (United States)

Sarah W. Kendrick; Frank R. III Thompson; Jennifer L. Reidy

2014-01-01

Despite being widespread and abundant, little is known about the breeding ecology and natural history of the Eastern Wood-Pewee (Contopus virens), in part because nests are often high in the canopy, difficult to view, and adults are monomorphic. We monitored nests of Eastern Wood-Pewees and recorded the feeding rate of nestlings by adults as part of...

Measurement test on creep strain rate of uranium-zirconium solid solutions

International Nuclear Information System (INIS)

Ogata, Takanari; Akabori, Mitsuo; Ogawa, Toru

1996-11-01

In order to measure creep strain rate of a small specimen of U-Zr solid solution, authors proposed an estimation method which was based upon the stress relaxation after compression. It was applied to measurement test on creep strain rate of the U-10wt%Zr specimen in the temperature range of 757 to 911degC. It may be concluded that the proposed method is valid, provided that the strain is within the appropriate range and that sufficient amount of the load decrement is observed. The obtained creep rate of U-10wt%Zr alloy indicated significantly smaller value, compared to the experimental data for pure U metal and evaluated data for U-Pu-Zr alloy. However, more careful measurement is desired in future since the present data are thought to be influenced by the precipitations included in the specimen. (author)

Flexible solid-state symmetric supercapacitors based on MnO2 nanofilms with high rate capability and long cyclability

Science.gov (United States)

Wu, Lingxia; Li, Ruizhi; Guo, Junling; Zhou, Cheng; Zhang, Wenpei; Wang, Chong; Huang, Yu; Li, Yuanyuan; Liu, Jinping

2013-08-01

Flexible solid-state symmetric supercapacitor was fabricated using MnO2 nanofilms growing directly on carbon cloth as the electrodes and PVA/H3PO4 gel as the electrolyte/separator. The device can be operated at a stable cell-voltage up to 1.4 V, obviously larger than that of conventional solid-state symmetric supercapacitors (≤1 V). It exhibited excellent rate capability with a scan rate as high as 20 V s-1 and a long cyclability (˜60000 cycles) even under severe mechanical deformation. The charge storage mechanism at different scan rates was also quantitatively analyzed.

Flexible solid-state symmetric supercapacitors based on MnO2 nanofilms with high rate capability and long cyclability

Directory of Open Access Journals (Sweden)

Lingxia Wu

2013-08-01

Full Text Available Flexible solid-state symmetric supercapacitor was fabricated using MnO2 nanofilms growing directly on carbon cloth as the electrodes and PVA/H3PO4 gel as the electrolyte/separator. The device can be operated at a stable cell-voltage up to 1.4 V, obviously larger than that of conventional solid-state symmetric supercapacitors (≤1 V. It exhibited excellent rate capability with a scan rate as high as 20 V s−1 and a long cyclability (∼60000 cycles even under severe mechanical deformation. The charge storage mechanism at different scan rates was also quantitatively analyzed.

A randomized controlled trial evaluating early versus traditional oral feeding after colorectal surgery

Directory of Open Access Journals (Sweden)

Ahmet Dag

2011-01-01

Full Text Available OBJECTIVE: This prospective randomized clinical study was conducted to evaluate the safety and tolerability of early oral feeding after colorectal operations. METHODS: A total of 199 patients underwent colorectal surgery and were randomly assigned to early feeding (n = 99 or a regular diet (n = 100. Patients’ characteristics, diagnoses, surgical procedures, comorbidity, bowel movements, defecation, nasogastric tube reinsertion, time of tolerance of solid diet, complications, and length of hospitalization were assessed. RESULTS: The two groups were similar in terms of gender, age, diagnosis, surgical procedures, and comorbidity. In the early feeding group, 85.9% of patients tolerated the early feeding schedule. Bowel movements (1.7±0.89 vs. 3.27±1.3, defecation (3.4±0.77 vs. 4.38±1.18 and time of tolerance of solid diet (2.48±0.85 vs. 4.77±1.81 were significantly earlier in the early feeding group. There was no change between the groups in terms of nasogastric tube reinsertion, overall complication or anastomotic leakage. Hospitalization (5.55±2.35 vs. 9.0±6.5 was shorter in the early feeding group. CONCLUSIONS: The present study indicated that early oral feeding after elective colorectal surgery was not only well tolerated by patients but also affected the postoperative outcomes positively. Early postoperative feeding is safe and leads to the early recovery of gastrointestinal functions.

The hydrolytic stage in high solids temperature phased anaerobic digestion improves the downstream methane production rate.

Science.gov (United States)

Buffière, P; Dooms, M; Hattou, S; Benbelkacem, H

2018-07-01

The role of the hydrolytic stage in high solids temperature phased anaerobic digestion was investigated with a mixture of cattle slurry and maize silage with variable ratios (100, 70 and 30% volatile solids coming from cattle slurry). It was incubated for 48 h at 37, 55, 65 and 72 °C. Soluble chemical oxygen demand and biochemical methane potential were measured at 0, 24 and 48 h. Higher temperatures improved the amount of solubilized COD, which confirmed previously reported results. Nevertheless, solubilization mostly took place during the first 24 h. The rate of methane production in post-hydrolysis BMPs increased after 48 h hydrolysis time, but not after 24 h. The first order kinetic constant rose by 40% on average. No correlation was observed between soluble COD and downstream methane production rate, indicating a possible modification of the physical structure of the particulate solids during the hydrolytic stage. Copyright © 2018 Elsevier Ltd. All rights reserved.

Rotating solid foam reactors : mass transfer and reaction rate

NARCIS (Netherlands)

Tschentscher, R.

2012-01-01

In this thesis the performance and applicability of rotating solid foam stirrers is investigated. The stirrer consists, thereby of a solid, highly porous structure, which is used as stirrer and catalyst support simultaneously. The solid foam block occupies a large part of the reactor volume.

Relationships between residual feed intake, average daily gain, and feeding behavior in growing dairy heifers.

Science.gov (United States)

Green, T C; Jago, J G; Macdonald, K A; Waghorn, G C

2013-05-01

Residual feed intake (RFI) is a measure of an individual's efficiency in utilizing feed for maintenance and production during growth or lactation, and is defined as the difference between the actual and predicted feed intake of that individual. The objective of this study was to relate RFI to feeding behavior and to identify behavioral differences between animals with divergent RFI. The intakes and body weight (BW) of 1,049 growing dairy heifers (aged 5-9 mo; 195 ± 25.8 kg of BW) in 5 cohorts were measured for 42 to 49 d to ascertain individual RFI. Animals were housed in an outdoor feeding facility comprising 28 pens, each with 8 animals and 1 feeder per pen, and were fed a dried, cubed alfalfa diet. This forage diet was chosen because most dairy cows in New Zealand are grazed on ryegrass-dominant pastures, without grain or concentrates. An electronic feed monitoring system measured the intake and feeding behavior of individuals. Feeding behavior was summarized as daily intake, daily feeding duration, meal frequency, feeding rate, meal size, meal duration, and temporal feeding patterns. The RFI was moderately to strongly correlated with intake in all cohorts (r=0.54-0.74), indicating that efficient animals ate less than inefficient animals, but relationships with feeding behavior traits (meal frequency, feeding duration, and feeding rate) were weak (r=0.14-0.26), indicating that feeding behavior cannot reliably predict RFI in growing dairy heifers. Comparison of the extremes of RFI (10% most and 10% least efficient) demonstrated similar BW and average daily gain for both groups, but efficient animals ate less; had fewer, longer meals; shorter daily feeding duration; and ate more slowly than the least-efficient animals. These groups also differed in their feeding patterns over 24h, with the most efficient animals eating less and having fewer meals during daylight (0600 to 2100 h), especially during the afternoon (1200 to 1800 h), but ate for a longer time during

Does skin-to-skin contact and breast feeding at birth affect the rate of primary postpartum haemorrhage: Results of a cohort study.

Science.gov (United States)

Saxton, A; Fahy, K; Rolfe, M; Skinner, V; Hastie, C

2015-11-01

to examine the effect of skin-to-skin contact and breast feeding within 30 minutes of birth, on the rate of primary postpartum haemorrhage (PPH) in a sample of women who were at mixed-risk of PPH. retrospective cohort study. two obstetric units plus a freestanding birth centre in New South Wales (NSW) Australia. after excluding women (n=3671) who did not have opportunity for skin to skin and breast feeding, I analysed birth records (n=7548) for the calendar years 2009 and 2010. Records were accessed via the electronic data base ObstetriX. skin to skin contact and breast feeding within 30 minutes of birth. outcome measure was PPH i.e. blood loss of 500ml or more estimated at birth. Data was analysed using descriptive statistics and logistic regression (unadjusted and adjusted). after adjustment for covariates, women who did not have skin to skin and breast feeding were almost twice as likely to have a PPH compared to women who had both skin to skin contact and breast feeding (aOR 0.55, 95% CI 0.41-0.72, pbirth may be effective in reducing PPH rates for women at any level of risk of PPH. The greatest effect was for women at lower risk of PPH. The explanation is that pronurturance promotes endogenous oxytocin release. Childbearing women should be educated and supported to have pronurturance during third and fourth stages of labour. Copyright © 2015 Elsevier Ltd. All rights reserved.

FAST PYROLYSIS PROCESS OF ORANGE SOLID WASTE. FACTORS INFLUENCE IN THE PROCESS

Directory of Open Access Journals (Sweden)

Leonardo Aguiar Trujillo

2015-04-01

Full Text Available The orange processing industry generates high volumes of solid residue. This residue has been used in animal feeding and biochemical processes. A possible energy use of the waste can be thermochemical fast pyrolysis process. The objective was to determine the influence of the heating rate and temperature in the process of rapid pyrolysis of orange solid residue. In the process a design, 2k full factorial experiment was used, evaluating the influence of the independent variables and its interactions on the answers, using a 95 % significance level. We found that temperature is the most significant influence on the responses parameter having significant influence on the yields to: gas, coal, tar and the calorific value of the gas and the heating rate does not influence the answers. Finally, the interaction affects the gas yield. The results obtained in this study are: Rgas (19 – 38 %, Rchar (25 – 42 %, Ralq (6 – 12 %, PCIgas entre (140 – 1050 kJ/m3N.

Systematic analysis of feeding behaviors and their effects on feed efficiency in Pekin ducks

Directory of Open Access Journals (Sweden)

Feng Zhu

2017-11-01

Full Text Available Abstract Background Feeding behavior study is important for animal husbandry and production. However, few studies were conducted on the feeding behavior and their relationship with feeding efficiency in Pekin ducks. In order to investigate the feeding behavior and their relationship with feed efficiency and other economic traits in Pekin ducks, we selected 358 male Pekin ducks and recorded feeding information between 3 to 6 wk of age using automatic electronic feeders, and compared the feeding behavior under different residual feed intake (RFI levels. Results We observed that total feed time, daily feed intake and feed intake per meal had strong positive correlations with feed efficiency traits; moreover, strong correlation between feed intake per meal and body weight was found (R=0.32, 0.36. Daily feeding rate meal and meal duration had weak correlations with feed efficiency (R=0.14~0.15. The phenotypic correlation of between-meal pauses, with feed efficiency was not observed. When daily changes were analyzed, high RFI ducks had the highest feed consumption over all times, and obvious differences in daily visits were found among different RFI level animals during the middle period; these differences were magnified with age, but there was no difference in daily meal number. Moreover, our data indicate that high RFI birds mainly take their meals at the edge of the population enclosure, where they are more susceptible to environmental interference. Conclusions Overall, this study suggests that the general feeding behaviors can be accurately measured using automatic electronic feeders and certain feeding behaviors in Pekin ducks are associated with improved feed efficiency.

Marrying Step Feed with Secondary Clarifier Improvements to Significantly Increase Peak Wet Weather Treatment Capacity: An Integrated Methodology.

Science.gov (United States)

Daigger, Glen T; Siczka, John S; Smith, Thomas F; Frank, David A; McCorquodale, J A

2017-08-01

  The need to increase the peak wet weather secondary treatment capacity of the City of Akron, Ohio, Water Reclamation Facility (WRF) provided the opportunity to test an integrated methodology for maximizing the peak wet weather secondary treatment capacity of activated sludge systems. An initial investigation, consisting of process modeling of the secondary treatment system and computational fluid dynamics (CFD) analysis of the existing relatively shallow secondary clarifiers (3.3 and 3.7 m sidewater depth in 30.5 m diameter units), indicated that a significant increase in capacity from 416 000 to 684 000 m3/d or more was possible by adding step feed capabilities to the existing bioreactors and upgrading the existing secondary clarifiers. One of the six treatment units at the WRF was modified, and an extensive 2-year testing program was conducted to determine the total peak wet weather secondary treatment capacity achievable. The results demonstrated that a peak wet weather secondary treatment capacity approaching 974 000 m3/d is possible as long as secondary clarifier solids and hydraulic loadings could be separately controlled using the step feed capability provided. Excellent sludge settling characteristics are routinely experienced at the City of Akron WRF, raising concerns that the identified peak wet weather secondary treatment capacity could not be maintained should sludge settling characteristics deteriorate for some reason. Computational fluid dynamics analysis indicated that the impact of the deterioration of sludge settling characteristics could be mitigated and the identified peak wet weather secondary treatment capacity maintained by further use of the step feed capability provided to further reduce secondary clarifier solids loading rates at the identified high surface overflow rates. The results also demonstrated that effluent limits not only for total suspended solids (TSS) and five-day carbonaceous biochemical oxygen demand (cBOD5) could be

Effect of restricted feeding under rearing on reproduction, body condition and blood metabolites of rabbit does selected for growth rate

Directory of Open Access Journals (Sweden)

C. Naturil-Alfonso

2017-12-01

Full Text Available Young rabbit females selected for growth rate can have nutritional needs which may not be met by the common practice of feed restriction during rearing in commercial rabbit production. The aim of this study was to analyse the effect of two different feeding programmes: restricted and ad libitum feeding, applied in young rabbit females for one month at the end of rearing, on reproductive performance, body condition and circulating metabolic hormones and metabolites in a rabbit line selected by growth rate in 3 consecutive reproductive cycles. Thus, twenty-four 16-week-old does were randomly assigned to a group in which the daily recommended nutrient intakes were satisfied (fed restricted: 130 g/day, n=13 or a group fed to satiety (ad libitum: 235.5 g/day, n=11 during one month. Then, all does were inseminated in 3 consecutive cycles using a 42-day reproductive cycle. Measurements of does’ body weight, perirenal fat thickness and plasma leptin, non-esterified-fatty-acids (NEFA, beta-hydroxybutyrate (BOHB and fructosamine were performed at artificial insemination (AI, parturition and weaning time in 3 consecutive cycles. Reproductive performance of does was evaluated based on fertility, litter size at parturition, prolificacy and productivity. Differences in body weight were found only in the 1st cycle, ad libitum fed females being heavier than restricted ones. Nevertheless, body weight variances disappeared in later cycles. No differences were found in perirenal fat thickness. Finally, in ad libitum fed females slight differences were found in plasma levels of NEFAs (452 vs. 258 μekv/L and 527 vs. 306 μekv/L for 1st and 2nd cycles and BOHB (0.26 vs. 0.03 mM for 2nd cycle, but disappeared in the 3rd reproductive cycle. Fertility, prolificacy and productivity was not significantly affected by the feeding programme. Nevertheless, total litter size showed to be higher in ad libitum fed females at second parturition (8.7 vs. 5.9 kits. Therefore

Socioeconomic status, infant feeding practices and early childhood obesity.

Science.gov (United States)

Gibbs, B G; Forste, R

2014-04-01

Children from low socioeconomic households are at greater risk of obesity. As breastfeeding can protect against child obesity, disadvantaged infants are less likely to breastfeed relative to more advantaged children. Whether infant feeding patterns, as well as other maternal characteristics mediate the association between social class and obesity has not been established in available research. Examine the impact of infant feeding practices on child obesity and identify the mechanisms that link socioeconomic status (SES) with child obesity. Based on a nationally representative longitudinal survey (ECLS-B) of early childhood (n = 8030), we examine how breastfeeding practices, the early introduction of solid foods and putting an infant to bed with a bottle mediate the relationship between social class and early childhood obesity relative to the mediating influence of other maternal characteristics (BMI, age at birth, smoking, depression and daycare use). Infants predominantly fed formula for the first 6 months were about 2.5 times more likely to be obese at 24 months of age relative to infants predominantly fed breast milk. The early introduction of solid foods (obesity. Unhealthy infant feeding practices were the primary mechanism mediating the relationship between SES and early childhood obesity. Results are consistent across measures of child obesity although the effect size of infant feeding practices varies. The encouragement and support of breastfeeding and other healthy feeding practices are especially important for low socioeconomic children who are at increased risk of early childhood obesity. Targeting socioeconomically disadvantaged mothers for breastfeeding support and for infant-led feeding strategies may reduce the negative association between SES and child obesity. The implications are discussed in terms of policy and practice. © 2013 The Authors. Pediatric Obesity © 2013 International Association for the Study of Obesity.

Quantification of protein backbone hydrogen-deuterium exchange rates by solid state NMR spectroscopy

International Nuclear Information System (INIS)

Lopez del Amo, Juan-Miguel; Fink, Uwe; Reif, Bernd

2010-01-01

We present the quantification of backbone amide hydrogen-deuterium exchange rates (HDX) for immobilized proteins. The experiments make use of the deuterium isotope effect on the amide nitrogen chemical shift, as well as on proton dilution by deuteration. We find that backbone amides in the microcrystalline α-spectrin SH3 domain exchange rather slowly with the solvent (with exchange rates negligible within the individual 15 N-T 1 timescales). We observed chemical exchange for 6 residues with HDX exchange rates in the range from 0.2 to 5 s -1 . Backbone amide 15 N longitudinal relaxation times that we determined previously are not significantly affected for most residues, yielding no systematic artifacts upon quantification of backbone dynamics (Chevelkov et al. 2008b). Significant exchange was observed for the backbone amides of R21, S36 and K60, as well as for the sidechain amides of N38, N35 and for W41ε. These residues could not be fit in our previous motional analysis, demonstrating that amide proton chemical exchange needs to be considered in the analysis of protein dynamics in the solid-state, in case D 2 O is employed as a solvent for sample preparation. Due to the intrinsically long 15 N relaxation times in the solid-state, the approach proposed here can expand the range of accessible HDX rates in the intermediate regime that is not accessible so far with exchange quench and MEXICO type experiments.

Simultaneous Saccharification and Fermentation of Lactic Acid from Empty Fruit Bunch at High Solids Loading

Directory of Open Access Journals (Sweden)

Nursia Hassan

2016-03-01

Full Text Available The production of value-added chemicals from the bioconversion of lignocellulose biomass has been considered a promising venture. In this study, microwave, alkali-pretreated empty fruit bunch (EFB was used as the substrate, utilizing pelletized filamentous Rhizopus oryzae NRRL 395 and cellulolytic enzymes for lactic acid production in a fed-batch simultaneous saccharification and fermentation (SSF process. Insoluble solids generally do not affect the SSF process until a certain concentration is exceeded. To achieve a high lactic acid concentration in the broth, a high solids loading was required to allow a higher rate of glucose conversion. However, the results revealed a decrease in the final lactic acid yield when running SSF at a massive insoluble solids level. High osmotic pressure in the medium led to poor cellular performance and caused the Rhizopus oryzae pellets to break down, affecting the lactic acid production. To improve the process performance, a fed-batch operation mode was used. The fed-batch operation was shown to facilitate higher lactic acid yield, compared with the SSF batch mode. Enzyme feeding, as well as substrate feeding, was also investigated as a means of enabling a higher dry matter content, with a high glucose conversion in SSF of cellulose-rich EFB.

Food for rumination : developing novel feeding strategies to improve the welfare of veal calves

NARCIS (Netherlands)

Webb, L.E.

2014-01-01

Summary of thesis entitled: “Food for Rumination – Developing novel feeding strategies to improve the welfare of veal calves”, Laura Webb

Veal calves are typically fed high levels of milk replacer supplemented with solid feed, which tends to contain a relatively small roughage component.

Responsive versus scheduled feeding in preterm infants (Review)

OpenAIRE

Watson, Julie; McGuire, William

2015-01-01

Scheduled feeding of prescribed enteral volumes remains standard practice for preterm infants. However, feeding preterm infants in response to their feeding and satiation cues (responsive, cue-based, or infant led feeding) rather than at scheduled intervals might enhance parent experience and satisfaction, help in the establishment of independent oral feeding, increase nutrient intake and growth rates, and allow earlier hospital discharge.\\ud \\ud Objectives: To assess the effect of feeding pr...

Optimisation of single-phase dry-thermophilic anaerobic digestion under high organic loading rates of industrial municipal solid waste: population dynamics.

Science.gov (United States)

Zahedi, S; Sales, D; Romero, L I; Solera, R

2013-10-01

Different high feed organic loading rates (OLRs) (from 5.7 g to 46.0 g TVS/l/d) or hydraulic retention times (HRTs) (from 15 d to 2 d) in single-phase dry-thermophilic anaerobic digestion (AD) of organic fraction municipal solid waste (OFMSW) were investigated. The specific gas production (SGP) values (0.25-0.53 m(3)/kg TVS) and the percentages of Eubacteria, Archaea, H2-utilising methanogens (HUMs) and acetate-utilising methanogens (AUMs) were stable within the ranges 80.2-91.1%, 12.4-18.5%, 4.4-9.8% and 5.5-10.9%, respectively. A HUM/AUM ratio greater than 0.7 seems to be necessary to maintain very low partial pressures of H2 required for dry AD process. Increasing OLR resulted in an increase in all the populations, except for propionate-utilising acetogens (PUAs). Optimal conditions were obtained at 3d HRT (OLR=30.7 g TVS/l/d), which is lower than the doubling time of acetogens and methanogens. The methane production (MP) was clearly higher than those reported in AD of OFMSW. Copyright © 2013 Elsevier Ltd. All rights reserved.

Rumen fermentation, blood metabolites, and growth performance of calves during transition from liquid to solid feed: Effects of dietary level and particle size of alfalfa hay.

Science.gov (United States)

Nemati, M; Amanlou, H; Khorvash, M; Moshiri, B; Mirzaei, M; Khan, M A; Ghaffari, M H

2015-10-01

This study evaluated the effects of particle size (PS) and dietary level of alfalfa hay (AH) on rumen fermentation parameters, blood metabolites, eating behavior, and growth performance in dairy calves during transition from liquid to solid feed. Sixty newborn dairy calves (41 ± 2.5,kg of body weight) were used in a 2 × 2 factorial arrangement with the factors dietary AH level (medium, 12.5%, or high, 25%, on DM basis) and PS (fine = 1mm or medium = 3mm, as geometric means) of AH. Hence, the dietary treatments were (1) medium level of AH with fine PS (M-FPS), (2) medium level of AH with medium PS (M-MPS), (3) high level of AH with fine PS (H-FPS), and (4) high level of AH with medium PS (H-MPS). Particle size of AH did not affect total DMI (TDMI) during the preweaning period, although TDMI was greater for calves fed MPS than in those fed FPS during the postweaning and overall periods. Calves fed MPS spent more time eating solid feed and ruminating and less time on nonnutritive oral behaviors compared with FPS calves. The dietary level of AH did not affect behavioral parameters. Average daily gain of calves was not affected by dietary treatment before weaning. During the postweaning and overall periods, average daily gain was greater in calves fed MPS than in those fed FPS at the 25% AH level, but this effect was absent with 12.5% AH. Furthermore, the rumen pH values on d 35 and 70 of the study were greater for MPS than for FPS, regardless of the dietary level of AH. Effects of AH level, PS, and their interaction did not affect blood glucose concentrations in developing calves. These results indicate that feed intake, feeding behavior, rumen fermentation parameters, and blood β-hydroxybutyrate concentration may be affected by rations differing in forage PS; thus, providing calves with MPS can improve calf performance and reduce their nonnutritive oral behaviors. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Comparison of infant-feeding practices in two health subdistricts with ...

African Journals Online (AJOL)

2014-05-14

May 14, 2014 ... replacement feeding and mixed feeding rates, as well as the age at which ... infant-feeding options, such as inappropriate replacement feeding and mixed ... and socio-demographic information, and the other infant-feeding.

A serial qualitative interview study of infant feeding experiences: idealism meets realism

Science.gov (United States)

Craig, Leone C A; Britten, Jane; McInnes, Rhona M

2012-01-01

Objective To investigate the infant feeding experiences of women and their significant others from pregnancy until 6 months after birth to establish what would make a difference. Design Qualitative serial interview study. Setting Two health boards in Scotland. Participants 72 of 541 invited pregnant women volunteered. 220 interviews approximately every 4 weeks with 36 women, 26 partners, eight maternal mothers, one sister and two health professionals took place. Results The overarching theme was a clash between overt or covert infant feeding idealism and the reality experienced. This is manifest as pivotal points where families perceive that the only solution that will restore family well-being is to stop breast feeding or introduce solids. Immediate family well-being is the overriding goal rather than theoretical longer term health benefits. Feeding education is perceived as unrealistic, overly technical and rules based which can undermine women's confidence. Unanimously families would prefer the balance to shift away from antenatal theory towards more help immediately after birth and at 3–4 months when solids are being considered. Family-orientated interactive discussions are valued above breastfeeding-centred checklist style encounters. Conclusions Adopting idealistic global policy goals like exclusive breast feeding until 6 months as individual goals for women is unhelpful. More achievable incremental goals are recommended. Using a proactive family-centred narrative approach to feeding care might enable pivotal points to be anticipated and resolved. More attention to the diverse values, meanings and emotions around infant feeding within families could help to reconcile health ideals with reality. PMID:22422915

Oral feeding with L-Glutamine and Nucleotides: impact on some GALT (gut associated lymphoid tissue parameters and cell proliferation/death rates in weaning piglets

Directory of Open Access Journals (Sweden)

V. Bontempo

2011-03-01

Full Text Available Dietary supplementation with glutamine and nucleotides may be useful during piglets weaning, when a rough passage from milk suckling to a solid feed may cause a strong reduction of the length of intestinal villi height and the depth of the crypts, and consequently of the intestinal digestive and absorptive capacities (Van Beers-Schreurs et al., 1998. Glutamine stimulates cell proliferation and activates protein kinases, suggesting that it could control the regularly alternating cellular apoptosis/proliferation sequence (Rhoads et al., 2000...

Advice about infant feeding for allergy prevention: A confusing picture for Australian consumers?

Science.gov (United States)

Netting, Merryn J; Allen, Katrina J

2017-09-01

Early feeding plays an important role in programming the immune system, particularly the risk of food allergy. There are many infant feeding guides published for consumers available in Australia, with most based on the National Health and Medical Research Council (NHMRC) 2012 Infant Feeding Guidelines for Health Workers and the Australasian Society of Clinical Immunology and Allergy (ASCIA) Infant Feeding Advice for allergy prevention. We sought to compare allergy-specific content of infant feeding educational material written for parents with these two documents. Australian websites of children's hospitals, early child health organisations and consumer groups providing information about diet during pregnancy, breastfeeding and early infancy were compared with NHMRC and ASCIA guidelines. Twenty-five sets of infant feeding information were identified. Food allergy was discussed in 18 resources. Recommended length of exclusive breastfeeding and timing of commencing solid foods was consistently around 6 months, with some variation in wording. Advice regarding to include and not delay introduction of common allergens into babies' diets was generally consistent with NHMRC and ASCIA recommendations, however the audit identified some resources that still recommended delayed introduction of common allergens. As consumers have access to a plethora of health information it is imperative that information about infant feeding from health-care authorities is simple, evidence-based and consistent to avoid confusion. Use of consensus wording related to infant feeding guidelines to prevent allergies will provide clear messages related to the timing of introduction to solid foods and inclusion of allergens in the early diet. © 2017 Paediatrics and Child Health Division (The Royal Australasian College of Physicians).

MFT homogeneity study at TNX: Final report on the low weight percent solids concentration

International Nuclear Information System (INIS)

Jenkins, W.J.

1993-01-01

A statistical design and analysis of both elemental analyses and weight percent solids analyses data was utilized to evaluate the MFT homogeneity at low heel levels and low agitator speed at both high and low solids feed concentrations. The homogeneity was also evaluated at both low and high agitator speed at the 6000+ gallons static level. The dynamic level portion of the test simulated feeding the Melter from the MFT to evaluate the uniformity of the solids slurry composition (Frit-PHA-Sludge) entering the melter from the MFT. This final report provides the results and conclusions from the second half of the study, the low weight percent solids concentration portion, as well as a comparison with the results from the first half of the study, the high weight percent solids portion

Protocol for a feasibility trial for improving breast feeding initiation and continuation: assets-based infant feeding help before and after birth (ABA)

Science.gov (United States)

Jolly, Kate; Ingram, Jenny; Clarke, Joanne; Johnson, Debbie; Trickey, Heather; Thomson, Gill; Dombrowski, Stephan U; Sitch, Alice; Dykes, Fiona; Feltham, Max G; Darwent, Kirsty; MacArthur, Christine; Roberts, Tracy

2018-01-01

Introduction Breast feeding improves the health of mothers and infants; the UK has low rates, with marked socioeconomic inequalities. While trials of peer support services have been effective in some settings, UK trials have not improved breast feeding rates. Qualitative research suggests that many women are alienated by the focus on breast feeding. We propose a change from breast feeding-focused interactions to respecting a woman’s feeding choices, inclusion of behaviour change theory and an increased intensity of contacts in the 2 weeks after birth when many women cease to breast feed. This will take place alongside an assets-based approach that focuses on the positive capability of individuals, their social networks and communities. We propose a feasibility study for a multicentre randomised controlled trial of the Assets feeding help Before and After birth (ABA) infant feeding service versus usual care. Methods and analysis A two-arm, non-blinded randomised feasibility study will be conducted in two UK localities. Women expecting their first baby will be eligible, regardless of feeding intention. The ABA infant feeding intervention will apply a proactive, assets-based, woman-centred, non-judgemental approach, delivered antenatally and postnatally tailored through face-to-face contacts, telephone and SMS texts. Outcomes will test the feasibility of delivering the intervention with recommended intensity and duration to disadvantaged women; acceptability to women, feeding helpers and professionals; and feasibility of a future randomised controlled trial (RCT), detailing recruitment rates, willingness to be randomised, follow-up rates at 3 days, 8 weeks and 6 months, and level of outcome completion. Outcomes of the proposed full trial will also be collected. Mixed methods will include qualitative interviews with women/partners, feeding helpers and health service staff; feeding helper logs; and review of audio-recorded helper–women interactions to assess

Feeding, evaluating, and controlling rumen function.

Science.gov (United States)

Lean, Ian J; Golder, Helen M; Hall, Mary Beth

2014-11-01

Achieving optimal rumen function requires an understanding of feeds and systems of nutritional evaluation. Key influences on optimal function include achieving good dry matter intake. The function of feeds in the rumen depends on other factors including chemical composition, rate of passage, degradation rate of the feed, availability of other substrates and cofactors, and individual animal variation. This article discusses carbohydrate, protein, and fat metabolism in the rumen, and provides practical means of evaluation of rations in the field. Conditions under which rumen function is suboptimal (ie, acidosis and bloat) are discussed, and methods for control examined. Copyright © 2014 Elsevier Inc. All rights reserved.

Infant feeding in Eastern Scotland: a longitudinal mixed methods evaluation of antenatal intentions and postnatal satisfaction--the Feeding Your Baby study.

Science.gov (United States)

Symon, Andrew G; Whitford, Heather; Dalzell, Janet

2013-07-01

breast-feeding initiation rates have improved in Scotland, but exclusive and partial breast-feeding rates fall rapidly for several reasons. We aimed to examine whether antenatal feeding intention was associated with satisfaction with infant feeding method; and to explore the similarities and differences in infant feeding experience of women with different antenatal feeding intention scores. antenatal questionnaire assessment of infant feeding intentions, based on the theory of planned behaviour; two-weekly postnatal follow-up of infant feeding practice by text messaging; final telephone interview to determine reasons for and satisfaction with infant feeding practice. 355 women in eastern Scotland were recruited antenatally; 292 completed postnatal follow up. Antenatal feeding intentions broadly predicted postnatal practice. The highest satisfaction scores were seen in mothers with no breast-feeding intention who formula fed from birth, and those with high breast-feeding intention who breastfed for more than 8 weeks. The lowest satisfaction scores were seen in those with high intention scores who only managed to breast feed for less than 3 weeks. This suggests that satisfaction with infant feeding is associated with achieving feeding goals, whether artificial milk or breast feeding. Reasons for stopping breast feeding were broadly similar over time (too demanding, pain, latching, perception of amount of milk, lack of professional support, sibling jealousy). Perseverance appeared to mark out those women who managed to breast feed for longer; this was seen across the socio-economic spectrum. Societal and professional pressure to breast feed was commonly experienced. satisfaction with actual infant feeding practice is associated with antenatal intention; levels are higher for those meeting their goals, whether formula feeding from birth or breast feeding for longer periods. Perceived pressure to breast feed raises questions about informed decision making. Identifying

Density of simulated americium/curium melter feed solution

International Nuclear Information System (INIS)

Rudisill, T.S.

1997-01-01

Vitrification will be used to stabilize an americium/curium (Am/Cm) solution presently stored in F-Canyon for eventual transport to Oak Ridge National Laboratory and use in heavy isotope production programs. Prior to vitrification, a series of in-tank oxalate precipitation and nitric/oxalic acid washes will be used to separate these elements and lanthanide fission products from the bulk of the uranium and metal impurities present in the solution. Following nitric acid dissolution and oxalate destruction, the solution will be denitrated and evaporated to a dissolved solids concentration of approximately 100 g/l (on an oxide basis). During the Am/Cm vitrification, an airlift will be used to supply the concentrated feed solution to a constant head tank which drains through a filter and an in-line orifice to the melter. Since the delivery system is sensitive to the physical properties of the feed, a simulated solution was prepared and used to measure the density as a function of temperature between 20 to 70 degrees C. The measured density decreased linearly at a rate of 0.0007 g/cm3/degree C from an average value of 1.2326 g/cm 3 at 20 degrees C to an average value of 1.1973g/cm 3 at 70 degrees C

Density of simulated americium/curium melter feed solution

Energy Technology Data Exchange (ETDEWEB)

Rudisill, T.S.

1997-09-22

Vitrification will be used to stabilize an americium/curium (Am/Cm) solution presently stored in F-Canyon for eventual transport to Oak Ridge National Laboratory and use in heavy isotope production programs. Prior to vitrification, a series of in-tank oxalate precipitation and nitric/oxalic acid washes will be used to separate these elements and lanthanide fission products from the bulk of the uranium and metal impurities present in the solution. Following nitric acid dissolution and oxalate destruction, the solution will be denitrated and evaporated to a dissolved solids concentration of approximately 100 g/l (on an oxide basis). During the Am/Cm vitrification, an airlift will be used to supply the concentrated feed solution to a constant head tank which drains through a filter and an in-line orifice to the melter. Since the delivery system is sensitive to the physical properties of the feed, a simulated solution was prepared and used to measure the density as a function of temperature between 20 to 70{degrees} C. The measured density decreased linearly at a rate of 0.0007 g/cm3/{degree} C from an average value of 1.2326 g/cm{sup 3} at 20{degrees} C to an average value of 1.1973g/cm{sup 3} at 70{degrees} C.

Beliefs and practices regarding solid food introduction among Latino parents in Northern California.

Science.gov (United States)

Beck, Amy L; Hoeft, Kristin S; Takayama, John I; Barker, Judith C

2018-01-01

Latino children are more likely to be obese than non-Hispanic white children, and feeding patterns that begin in infancy may contribute to this disparity. The objective of this study was to elucidate beliefs and practices related to the introduction of solids and solid food feeding in the first year of life among low-income Latino parents residing in Northern California. We conducted 26 semi-structured interviews that explored the timing of introduction of solids, selection of foods to serve to infants, feeding strategies, sources of information on solid food feeding and concerns about infant weight. We found that most parents relied on traditional practices in selecting first foods for infants and had a strong preference for homemade food, which was often chicken soup with vegetables. Parents generally described responsive feeding practices; however a minority used pressuring practices to encourage infants to eat more. Very few parents practiced repeated gentle introduction of unfamiliar food to increase acceptance. High calorie low nutrient foods were typically introduced at around 12 months of age and parents struggled to limit such foods once children were old enough to ask for them. Parents were concerned about the possibility of infants becoming overweight and considered health care providers to be an important source of information on infant weight status. The results of this study can be used to inform the development of interventions to prevent obesity in Latino children with similar demographics to our study population. Copyright © 2017 Elsevier Ltd. All rights reserved.

Study on the relationship between infant rotavirus enteritis and breast feeding

International Nuclear Information System (INIS)

Chen Yanping; Liu Hui; Sun Xuerong; Wei Tao; Wang Bin

2005-01-01

Objective: To study the relationship between infant rotavirus enteritis and breast feeding, with emphasis on early immuno-protection provided by breast feeding as well as later possible hazards with rotavirus carrier mothers. Methods: Stool specimens from 520 infants with diarrhea were screened for rotavirus with colloid gold method. Positive specimens were confirmed with RT-PCR. Results: In local (Qingdao) infants with enteritis, the over-all incidence of rotavirus infection was 31.2%. Positive rate in breast-feeding infants was only 26.8%, being significantly lower than that in bottle-feeding ones (45.2%). The virus infectivity rate in both groups of breast- feeding infants (below 6 months and 7-12 months) was lower than the corresponding rate in the bottle feeding group. However, infant fed from rotavirus carriers had significantly higher fecal positive rate of rotavirus than that in infants fed from non-carriers. Conclusion: (1) At beginning, especially below 6 months, breast-feeding provided important protection again rotavirus enteritis in the infants. (2) certain infections could be transmitted through breast feedings, which deserved closer observation. (authors)

Ad libitum or demand/semi-demand feeding versus scheduled interval feeding for preterm infants.

Science.gov (United States)

McCormick, Felicia M; Tosh, Karen; McGuire, William

2010-02-17

Scheduled interval feeding of prescribed enteral volumes is current standard practice for preterm infants. However, feeding preterm infants in response to their hunger and satiation cues (ad libitum or demand/semi demand) rather than at scheduled intervals might help in the establishment of independent oral feeding, increase nutrient intake and growth rates, and allow earlier hospital discharge. To assess the effect of a policy of feeding preterm infants on an ad libitum or demand/semi-demand basis versus feeding prescribed volumes at scheduled intervals on growth rates and the time to hospital discharge. We used the standard search strategy of the Cochrane Neonatal Review Group. This included searches of the Cochrane Central Register of Controlled Trials (CENTRAL, The Cochrane Library, Issue 4, 2009), MEDLINE (1966 to Oct 2009), EMBASE (1980 to Oct 2009), CINAHL (1982 to Oct 2009), conference proceedings, and previous reviews. Randomised or quasi-randomised controlled trials (including cluster randomised trials) that compared a policy of feeding preterm infants on an ad libitum or demand/semi-demand basis versus feeding at scheduled intervals. We used the standard methods of the Cochrane Neonatal Review Group with separate evaluation of trial quality and data extraction by two review authors. We found eight randomised controlled trials that compared ad libitum or demand/semi-demand regimens with scheduled interval regimes in preterm infants in the transition phase from intragastric tube to oral feeding. The trials were generally small and of variable methodological quality. The duration of the intervention and the duration of data collection and follow-up in most of the trials was not likely to have allowed detection of measurable effects on growth. Three trials reported that feeding preterm infants using an ad libitum or demand/semi-demand feeding regimen allowed earlier discharge from hospital (by about two to four days) but other trials did not confirm this

Effects of two different feeding positions on physiological characteristics and feeding performance of preterm infants: A randomized controlled trial.

Science.gov (United States)

Girgin, Burcu Aykanat; Gözen, Duygu; Karatekin, Güner

2018-04-01

The aim of this randomized controlled study was to determine the effect of semielevated side-lying (ESL) and semielevated supine (ESU) positions, which are used to bottle-feed preterm infants, on their physiological characteristics and feeding performance. The sample consisted of preterm infants who were born in the 31st gestational week and below, and met the inclusion criteria. A randomization was provided in the sample group with a total of 80 infants including 38 infants in the ESL (experimental) group and 42 infants in the ESU (control) group. Both groups were compared in terms of their SpO2 values, heart rates, and feeding performances before, during, and after the feeding. The data were obtained by using a form for infant descriptive characteristics, feeding follow-up form, a Masimo Radical-7 pulse oximeter device, and a video camera. It was determined that the infants in the ESL group had statistically significantly higher SpO2 values (ESL: 96.77 ± 2.51; ESU: 93.48 ± 5.63) and lower heart rates (ESL: 155.87 ± 11.18; ESU: 164.35 ± 6.00) during the feeding compared to the infants in the ESU group (p ESL group. The ESL position has a more positive effect on oxygen saturation and heart rate of infants and it is more effective in providing a physiological stabilization during the feeding, compared to the ESU position. According to these results, the ESL position can be recommended for preterm feeding. © 2018 Wiley Periodicals, Inc.

SOLIDS PRECIPITATION EVENT IN MCU CAUSAL ANALYSIS AND RECOMMENDATIONS FROM SOLIDS RECOVERY TEAM

Energy Technology Data Exchange (ETDEWEB)

Garrison, A.; Aponte, C.

2014-08-15

A process upset occurred in the Modular Caustic-Side Solvent Extraction Unit (MCU) facility on April 6th, 2014. During recovery efforts, a significant amount of solids were found in the Salt Solution Feed Tank (SSFT), Salt Solution Receipt Tanks (SSRTs), two extraction contactors, and scrub contactors. The solids were identified by Savannah River National Laboratory (SRNL) as primarily sodium oxalate and sodium alumina silicate (NAS) with the presence of some aluminum hydroxide. NAS solids have been present in the SSFT since simulant runs during cold chemical startup of MCU in 2007, and have not hindered operations since that time. During the process upset in April 2014, the oxalate solids partially blocked the aqueous outlet of the extraction contactors, causing salt solution to exit through the contactor organic outlet to the scrub contactors with the organic phase. This salt solution overwhelmed the scrub contactors and passed with the organic phase to the strip section of MCU. The partially reversed flow of salt solution resulted in a Strip Effluent (SE) stream that was high in Isopar™ L, pH and sodium. The primary cause of the excessive solids accumulation in the SSRTs and SSFT at MCU is attributed to an increase in the frequency of oxalic acid cleaning of the 512-S primary filter. Agitation in the SSRTs at MCU in response to cold weather likely provided the primary mechanism to transfer the solids to the contactors. Sources of the sodium oxalate solids are attributed to the oxalic acid cleaning solution used to clean the primary filter at the Actinide Removal Process (ARP) filtration at 512-S, as well as precipitation from the salt batch feed, which is at or near oxalate saturation. The Solids Recovery Team was formed to determine the cause of the solids formation and develop recommendations to prevent or mitigate this event in the future. A total of 53 recommendations were generated. These recommendations were organized into 4 focus areas: • Improve

Application of spatial and non-spatial data analysis in determination of the factors that impact municipal solid waste generation rates in Turkey

International Nuclear Information System (INIS)

Keser, Saniye; Duzgun, Sebnem; Aksoy, Aysegul

2012-01-01

Highlights: ► Spatial autocorrelation exists in municipal solid waste generation rates for different provinces in Turkey. ► Traditional non-spatial regression models may not provide sufficient information for better solid waste management. ► Unemployment rate is a global variable that significantly impacts the waste generation rates in Turkey. ► Significances of global parameters may diminish at local scale for some provinces. ► GWR model can be used to create clusters of cities for solid waste management. - Abstract: In studies focusing on the factors that impact solid waste generation habits and rates, the potential spatial dependency in solid waste generation data is not considered in relating the waste generation rates to its determinants. In this study, spatial dependency is taken into account in determination of the significant socio-economic and climatic factors that may be of importance for the municipal solid waste (MSW) generation rates in different provinces of Turkey. Simultaneous spatial autoregression (SAR) and geographically weighted regression (GWR) models are used for the spatial data analyses. Similar to ordinary least squares regression (OLSR), regression coefficients are global in SAR model. In other words, the effect of a given independent variable on a dependent variable is valid for the whole country. Unlike OLSR or SAR, GWR reveals the local impact of a given factor (or independent variable) on the waste generation rates of different provinces. Results show that provinces within closer neighborhoods have similar MSW generation rates. On the other hand, this spatial autocorrelation is not very high for the exploratory variables considered in the study. OLSR and SAR models have similar regression coefficients. GWR is useful to indicate the local determinants of MSW generation rates. GWR model can be utilized to plan waste management activities at local scale including waste minimization, collection, treatment, and disposal. At global

Radiation pasteurization of mink feed: Effect of irradiated feed on reproductive performance, growth and fur quality of mink

Science.gov (United States)

Passey, C. A.; Roy, D.; Savoie, L.; Malo, R.; Wilson, J.

No significant differences were observed in the net birth rate of kits/female between the 7 breeding groups. However, there was reduced incidence (P = 0.05) of kit deaths among the females receiving irradiated feed, and larger kit size (P pasteurization of mink feed (frozen meat to 1 kGy, and dry feed to 2 kGy or more) should therefore help improve feed utilization, keep the animals healthier, and reproducing better without affecting fur quality.

Larval developmental rate, metabolic rate and future growth performance in Atlantic salmon

DEFF Research Database (Denmark)

Serrano, Jonathan Vaz; Åberg, Madelene; Gjoen, Hans Magnus

2009-01-01

, quantified as time to first feeding, and growth in later stages was demonstrated in Atlantic salmon (Salmo salar L.). The observed relationship between future growth and larval developmental rate suggests that sorting larvae by time to first feeding can be a potential tool to optimize feeding strategies...... and growth in commercial rearing of Atlantic salmon. Furthermore, the link between larval standard metabolic rate and developmental rate and future growth is discussed in the present study....

An Integrated Instrumentation System for Velocity, Concentration and Mass Flow Rate Measurement of Solid Particles Based on Electrostatic and Capacitance Sensors

Directory of Open Access Journals (Sweden)

Jian Li

2015-12-01

Full Text Available The online and continuous measurement of velocity, concentration and mass flow rate of pneumatically conveyed solid particles for the high-efficiency utilization of energy and raw materials has become increasingly significant. In this paper, an integrated instrumentation system for the velocity, concentration and mass flow rate measurement of dense phase pneumatically conveyed solid particles based on electrostatic and capacitance sensorsis developed. The electrostatic sensors are used for particle mean velocity measurement in combination with the cross-correlation technique, while the capacitance sensor with helical surface-plate electrodes, which has relatively homogeneous sensitivity distribution, is employed for the measurement of particle concentration and its capacitance is measured by an electrostatic-immune AC-based circuit. The solid mass flow rate can be further calculated from the measured velocity and concentration. The developed instrumentation system for velocity and concentration measurement is verified and calibrated on a pulley rig and through static experiments, respectively. Finally the system is evaluated with glass beads on a gravity-fed rig. The experimental results demonstrate that the system is capable of the accurate solid mass flow rate measurement, and the relative error is within −3%–8% for glass bead mass flow rates ranging from 0.13 kg/s to 0.9 kg/s.

Study on mycoflora of poultry feed ingredients and finished feed in Iran.

Science.gov (United States)

Ghaemmaghami, Seyed Soheil; Modirsaneii, Mehrdad; Khosravi, Ali Reza; Razzaghi-Abyaneh, Mehdi

2016-02-01

Unhygienic poultry feedstuffs can lead to nutrient losses and detrimental effect on poultry production and public health. In the present study, mycobiota and colony-forming units per gram in ingredients and finish poultry feed was evaluated with special reference to potentially mycotoxigenic fungi. Eighty five samples of corn, soybean meal and poultry finished feed were collected from nine poultry feed factories located in three provinces i.e. Tehran, Alborz and Qom in Iran from October 2014 to January 2015. Samples were cultured on Sabouraud dextrose agar (SDA), Aspergillus flavus and parasiticus agar (AFPA) and dichloran rosebengal chloramphenicol agar (DRBC) and incubated at 28 °C for 7-10 days. Purified fungal colonies were identified by a combination of macro- and microscopic morphological criteria. For determining the rate of fungal contamination, samples were cultured on SDA and colony forming units (CFUs) were calculated. A total of 384 fungal isolates belonging to 7 genera of filamentous fungi and yeasts were obtained from corn (124 isolates), soybean meal (92 isolates), and feed before (72 isolates), and after pelleting (96 isolates). The most prominent fungal isolate in corn, soybean meal and feed before pelleting (feed as mash form) was Fusarium but in feed after pelleting was Aspergillus. Among 5 Aspergillus species isolated, potentially aflatoxigenic A. flavus isolates was predominant in corn (46.6%), soybean meal (72.7%) and poultry finished feed (75%). CFUs results indicated that 9/22 corn samples (40.9%), none of 22 soybean meal samples, 19/41 finished feed (46.3%) were contaminated higher than the standard limit. Our results indicated that corn, soybean meal and finished feed of poultry feed mill are contaminated with various fungal genera by different levels sometimes higher that the standard limits. Contamination with potentially mycotoxigenic fungi especially Aspergillus species may be considered as a human public health hazard.

Determining the amount of waste plastics in the feed of Austrian waste-to-energy facilities.

Science.gov (United States)

Schwarzböck, Therese; Van Eygen, Emile; Rechberger, Helmut; Fellner, Johann

2017-02-01

Although thermal recovery of waste plastics is widely practiced in many European countries, reliable information on the amount of waste plastics in the feed of waste-to-energy plants is rare. In most cases the amount of plastics present in commingled waste, such as municipal solid waste, commercial, or industrial waste, is estimated based on a few waste sorting campaigns, which are of limited significance with regard to the characterisation of plastic flows. In the present study, an alternative approach, the so-called Balance Method, is used to determine the total amount of plastics thermally recovered in Austria's waste incineration facilities in 2014. The results indicate that the plastics content in the waste feed may vary considerably among different plants but also over time. Monthly averages determined range between 8 and 26 wt% of waste plastics. The study reveals an average waste plastics content in the feed of Austria's waste-to-energy plants of 16.5 wt%, which is considerably above findings from sorting campaigns conducted in Austria. In total, about 385 kt of waste plastics were thermally recovered in all Austrian waste-to-energy plants in 2014, which equals to 45 kg plastics cap -1 . In addition, the amount of plastics co-combusted in industrial plants yields a total thermal utilisation rate of 70 kg cap -1  a -1 for Austria. This is significantly above published rates, for example, in Germany reported rates for 2013 are in the range of only 40 kg of waste plastics combusted per capita.

Inclusion rate and physiological effects of prolonged feeding of ...

African Journals Online (AJOL)

The effect of incluusion of cocoa bean cake (CBC) on productive performance and physiological response of Isa Brown pullets to prolonged feeding of CBC were investigated. Dietary Inclusions or CBC (0, 50, 100 and 200g/ kg-1 diet) were monitored in typical poultry diets from day old to 51 weeks of age. Sexual maturity ...

The effect of wind shielding and pen position on the average daily weight gain and feed conversion rate of grower/finisher pigs

DEFF Research Database (Denmark)

Jensen, Dan B.; Toft, Nils; Cornou, Cécile

2014-01-01

of the effects of wind shielding, linear mixed models were fitted to describe the average daily weight gain and feed conversion rate of 1271 groups (14 individuals per group) of purebred Duroc, Yorkshire and Danish Landrace boars, as a function of shielding (yes/no), insert season (winter, spring, summer, autumn...... groups placed in the 1st and 4th pen (p=0.0001). A similar effect was not seen on smaller pigs. Pen placement appears to have no effect on feed conversion rate.No interaction effects between shielding and distance to the corridor could be demonstrated. Furthermore, in models including both factors......). The effect could not be tested for Yorkshire and Danish Landrace due to lack of data on these breeds. For groups of pigs above the average start weight, a clear tendency of higher growth rates at greater distances from the central corridor was observed, with the most significant differences being between...

Alcohol or feed product from rotten sweet potatoes

Energy Technology Data Exchange (ETDEWEB)

Ikeda, T

1956-06-25

Rotten sweet potatoes were mixed with the same weight of a pressed cake of fermented alcohol mash, and the mixture was cooked and fermented with amylo stock mash under semisolid conditions for five days. The fermented mash was steam-distilled to recover ethanol, and a solid residue was dried to give a nutrient feed product.

We only talk about breast feeding: a discourse analysis of infant feeding messages in antenatal group-based education.

Science.gov (United States)

Jennifer, Fenwick; Elaine, Burns; Athena, Sheehan; Virginia, Schmied

2013-05-01

the aim of the study was to examine the dominant discourses that midwives draw on to present information on breast feeding in group-based antenatal education sessions. breast-feeding initiation rates are high among Australian women however, duration rates are low. Antenatal breast-feeding education is considered a key strategy in promoting breast feeding to childbearing women. The efficacy and effectiveness of such a strategy is equivocal and there is little qualitative work examining group-based antenatal breast-feeding education. discourse analysis was used to explore the language and practises of midwives facilitating group antenatal breast-feeding education sessions at two Australian maternity facilities. Nine sessions were observed and tape recorded over a 12 month period. Each session lasted between 60 and 140 mins. the analysis revealed four dominate discourses midwives used to promote breast feeding during group-based antenatal education session. The predominant discourses 'There is only one feeding option': breast feeding' and 'Selling the 'breast is best' reflected how midwives used their personal and professional commitment to breast feeding, within supportive and protective policy frameworks, to convince as many pregnant women as possible to commit to breast feeding. Sessions were organised to ensure women and their partners were 'armed' with as much information as possible about the value of breastmilk, successful positioning and attachment and practical strategies to deal with early breast-feeding problems. Antenatal commitment to breast feeding was deemed necessary if women were to overcome potential hurdles and maintain a commitment to the supply of breast milk. The latter two discourses, drawn upon to promote the breast-feeding message, presented infants as 'hard wired' to breast feed and male partners as 'protectors' of breast feeding. midwives clearly demonstrated a passion and enthusiasm for breast-feeding education. Examining the dominant

Responsive versus scheduled feeding for preterm infants

OpenAIRE

Watson, Julie; McGuire, William

2016-01-01

Version 5\\ud Background\\ud \\ud Feeding preterm infants in response to their hunger and satiation cues (responsive, cue-based, or infant-led feeding) rather than at scheduled intervals might enhance infants' and parents' experience and satisfaction, help in the establishment of independent oral feeding, increase nutrient intake and growth rates, and allow earlier hospital discharge.\\ud \\ud \\ud Objectives\\ud \\ud To assess the effect of a policy of feeding preterm infants on a responsive basis v...

Radiation pasteurization of mink feed

International Nuclear Information System (INIS)

Passey, C.A.; Roy, D.; Savoie, L.; Wilson, J.

1990-01-01

No significant differences were observed in the net birth rate of mink kits/female between the 7 breeding groups. However, there was reduced incidence (P=0.05) of kit deaths among the females receiving irradiated feed, and larger kit size (P<0.0001) at birth particularly for the litter size of 5-8 kits. The second generation minks born to parents receiving feed irradiated to a planned dose of 1 kGy weighed on average about 2.5% more, and their fur was on average about 1±0.26 cm longer (12% more males making the top length grade). Moreover, there was no effect of irradiated feed on fur quality. Irradiation of mink feed with subsequent frozen storage of the meat component improved the microbiological quality by decreasing the incidence of Pseudomonas sp. and Salmonella sp. Radiation pasteurization of mink feed (frozen meat to 1 kGy, and dry feed to 2 kGy or more) should therefore help improve feed utilization, keep animals healthier, and reproducing better without affecting fur quality. (author)

Investigation of the available technologies and their feasibility for the conversion of food waste into fish feed in Hong Kong.

Science.gov (United States)

Cheng, Jack Y K; Lo, Irene M C

2016-04-01

Food waste is the largest constituent of municipal solid waste in Hong Kong, but food waste recycling is still in its infancy. With the imminent saturation of all landfill sites by 2020, multiple technologies are needed to boost up the food waste recycling rate in Hong Kong. Conversion of food waste into animal feeds is prevalent in Japan, South Korea, and Taiwan, treating over 40 % of their recycled food waste. This direction is worth exploring in Hong Kong once concerns over food safety are resolved. Fortunately, while feeding food waste to pigs and chickens poses threats to public health, feeding it to fish is considered low risk. In order to examine the feasibility of converting food waste into fish feed in Hong Kong, this paper investigates the market demand, technical viability, feed quality, regulatory hurdles, and potential contribution. The results show that a significant amount of food waste can be recycled by converting it into fish feed due to the enormous demand from feed factories in mainland China. Two conversion technologies, heat drying and black soldier fly bioconversion, are studied extensively. Black soldier fly bioconversion is preferable because the end-product, insect powder, is anticipated to gain import approval from mainland China. The authors suggest further research efforts to speed up its application for food waste recycling in urban cities.

Phenotypic and genetic relationships of feeding behavior with feed intake, growth performance, feed efficiency, and carcass merit traits in Angus and Charolais steers.

Science.gov (United States)

Chen, L; Mao, F; Crews, D H; Vinsky, M; Li, C

2014-03-01

Feeding behavior traits including daily feeding duration (FD), daily feeding head down time (HD), average feeding duration per feeding event (FD_AVE), average feeding head down time per feeding event (HD_AVE), feeding frequency (FF), and meal eating rate (ER) were analyzed to estimate their phenotypic and genetic correlations with feed intake, growth performance, residual feed intake (RFI), ultrasound, and carcass merit traits in Angus and Charolais finishing steers. Heritability estimates for FD, HD, FD_AVE, HD_AVE, FF, and ER were 0.27 ± 0.09 (SE), 0.25 ± 0.09, 0.19 ± 0.06, 0.11 ± 0.05, 0.24 ± 0.08, and 0.38 ± 0.10, respectively, in the Angus population and 0.49 ± 0.12, 0.38 ± 0.11, 0.31 ± 0.09, 0.29 ± 0.10, 0.43 ± 0.11, and 0.56 ± 0.13, respectively, in the Charolais population. In both the Angus and Charolais steer populations, FD and HD had relatively stronger phenotypic (0.17 ± 0.06 to 0.32 ± 0.04) and genetic (0.29 ± 0.17 to 0.54 ± 0.18) correlations with RFI in comparison to other feeding behavior traits investigated, suggesting the potential of FD and HD as indicators in assessing variation of RFI. In general, feeding behavior traits had weak phenotypic correlations with most of the ultrasound and carcass merit traits; however, estimated genetic correlations of the feeding behavior traits with some fat deposition related traits were moderate to moderately strong but differed in magnitude or sign between the Angus and Charolais steer populations, likely reflecting their different biological types. Genetic parameter estimation studies involving feeding behavior traits in beef cattle are lacking and more research is needed to better characterize the relationships between feeding behavior and feed intake, growth, feed utilization, and carcass merit traits, in particular with respect to different biological types of cattle.

Infant sleep and night feeding patterns during later infancy: association with breastfeeding frequency, daytime complementary food intake, and infant weight.

Science.gov (United States)

Brown, Amy; Harries, Victoria

2015-06-01

Infant sleep is a common concern for new parents. Although many expect a newborn infant to wake frequently, encouraging a baby to sleep through the night by a few months of age is seen as both a developmental aim and a parenting success. Many new mothers believe that their infants' diet is related to their sleep; formula milk or increased levels of solid food are often given in an attempt to promote sleep. However, the impact of these in later infancy is not understood. In the current study 715 mothers with an infant 6-12 months of age reported their infants' typical night wakings and night feeds alongside any breastfeeding and frequency of solid meals. Of infants in this age range, 78.6% still regularly woke at least once a night, with 61.4% receiving one or more milk feeds. Both night wakings and night feeds decreased with age. No difference in night wakings or night feeds was found between mothers who were currently breastfeeding or formula feeding. However, infants who received more milk or solid feeds during the day were less likely to feed at night but not less likely to wake. The findings have important implications for health professionals who support new mothers with infant sleep and diet in the first year. Increasing infant calories during the day may therefore reduce the likelihood of night feeding but will not reduce the need for parents to attend to the infant in the night. Breastfeeding has no impact on infant sleep in the second 6 months postpartum.

Development of new processing technology for ruminant feed

International Nuclear Information System (INIS)

Mat Rasol Awang; Hassan Hamdani Mutaat; Zainun Said; Alias Saidali; Erwan Md Ariff

2002-01-01

The technology for production ruminant feed from agriculture by-product remains scare despite plentiful availability of feeding materials worldwide. Factors that prohibit the process technology development suggested that their peculiar physical make up, high cost of production and inferior product quality compared to established raw material, had consequently impeding the effort. In Malaysia, only two pilot plants exist; they demonstrate utilization of Oil Palm Frond (OPF) into feed. In the case of OPF in situ utilization as feed, farmers use chipper machine or shredder to process it. Other by-products have not been successfully exploited, except for Palm Kernel Cake (PKC) and Palm Oil Mill Effluent (POME) that already in commercial operation. In view of the by-product availability as feeding material in ruminant feeding system and availability of new chipper and shredder machines, the prospect of processing agriculture by-products into feed is expected to be a promising business venture. This paper describes the technology for production of new feed from oil palm Empty Fruit Bunch (EFB). It elaborates on Sterifeed Plant Operation based on plant capacity of 0.5 ton/day production. The operation aspects discuss raw materials handling and processing as well as transforming the products into marketable forms. In this process EFB is initially predigested by fungi in solid state fermentation process into feed materials; the product is ready to be fed in fresh form to animal. The operation exercise has established actual process flow, identified problems and process drawbacks. Based on this experience, availability of localized raw materials EFB at the palm oil mill and rapid development of processing machinery, it is very likely that a commercially viable feed processing plant can be established in the near future. In addition, establishing more data on product quality by further test and characterization of the new feed may contribute to success of the project. (Author)

Illumina MiSeq Phylogenetic Amplicon Sequencing Shows a Large Reduction of an Uncharacterised Succinivibrionaceae and an Increase of the Methanobrevibacter gottschalkii Clade in Feed Restricted Cattle.

Directory of Open Access Journals (Sweden)

Matthew Sean McCabe

Full Text Available Periodic feed restriction is used in cattle production to reduce feed costs. When normal feed levels are resumed, cattle catch up to a normal weight by an acceleration of normal growth rate, known as compensatory growth, which is not yet fully understood. Illumina Miseq Phylogenetic marker amplicon sequencing of DNA extracted from rumen contents of 55 bulls showed that restriction of feed (70% concentrate, 30% grass silage for 125 days, to levels that caused a 60% reduction of growth rate, resulted in a large increase of relative abundance of Methanobrevibacter gottschalkii clade (designated as OTU-M7, and a large reduction of an uncharacterised Succinivibrionaceae species (designated as OTU-S3004. There was a strong negative Spearman correlation (ρ = -0.72, P = <1x10(-20 between relative abundances of OTU-3004 and OTU-M7 in the liquid rumen fraction. There was also a significant increase in acetate:propionate ratio (A:P in feed restricted animals that showed a negative Spearman correlation (ρ = -0.69, P = <1x10(-20 with the relative abundance of OTU-S3004 in the rumen liquid fraction but not the solid fraction, and a strong positive Spearman correlation with OTU-M7 in the rumen liquid (ρ = 0.74, P = <1x10(-20 and solid (ρ = 0.69, P = <1x10(-20 fractions. Reduced A:P ratios in the rumen are associated with increased feed efficiency and reduced production of methane which has a global warming potential (GWP 100 years of 28. Succinivibrionaceae growth in the rumen was previously suggested to reduce methane emissions as some members of this family utilise hydrogen, which is also utilised by methanogens for methanogenesis, to generate succinate which is converted to propionate. Relative abundance of OTU-S3004 showed a positive Spearman correlation with propionate (ρ = 0.41, P = <0.01 but not acetate in the liquid rumen fraction.

Feeding practices of infants through the first year of life in Italy.

Science.gov (United States)

Giovannini, M; Riva, E; Banderali, G; Scaglioni, S; Veehof, S H E; Sala, M; Radaelli, G; Agostoni, C

2004-04-01

To investigate infant feeding practices through the first year of life in Italy, and to identify factors associated with the duration of breastfeeding and early introduction of solid foods. Structured phone interviews on feeding practices were conducted with 2450 Italian-speaking mothers randomly selected among women who delivered a healthy-term singleton infant in November 1999 in Italy. Interviews were performed 30 d after delivery and when the infants were aged 3, 6, 9 and 12 mo. Type of breastfeeding was classified according to the WHO criteria. Breastfeeding started in 91.1% of infants. At the age of 6 and 12 mo, respectively, 46.8% and 11.8% of the infants was still breastfed, 68.4% and 27.7% received formula, and 18.3% and 65.2% were given cow's milk. Solids were introduced at the mean age of 4.3 mo (range 1.6-6.5 mo). Introduction of solids occurred before age 3 and 4 mo in 5.6% and 34.2% of infants, respectively. The first solids introduced were fruit (73.1%) and cereals (63.9%). The main factors (negatively) associated with the duration of breastfeeding were pacifier use (p introduction of formula (p introduction of solids (p = 0.05). Factors (negatively) associated with the introduction of solids foods before the age of 3 mo were mother not having breastfed (p introduction of formula (p introduction of complementary foods. National guidelines, public messages and educational campaigns should be promoted in Italy.

mHealth Series: Text messaging data collection of infant and young child feeding practice in rural China – a feasibility study

Science.gov (United States)

Du, Xiaozhen; Wang, Wei; Helena van Velthoven, Michelle; Chen, Li; Scherpbier, Robert W.; Zhang, Yanfeng; Wu, Qiong; Li, Ye; Rao, Xiuqin; Car, Josip

2013-01-01

Background Face–to–face interviews by trained field workers are commonly used in household surveys. However, this data collection method is labor–intensive, time–consuming, expensive, prone to interviewer and recall bias and not easily scalable to increase sample representativeness. Objective To explore the feasibility of using text messaging to collect information on infant and young child feeding practice in rural China. Methods Our study was part of a clustered randomized controlled trial that recruited 591 mothers of children aged 12 to 29 months in rural China. We used the test–retest method: first we collected data through face–to–face interviews and then through text messages. We asked the same five questions on standard infant and young child feeding indicators for both methods and asked caregivers how they fed their children yesterday. We assessed the response rate of the text messaging method and compared data agreement of the two methods. Finding In the text messaging survey, the response rate for the first question and the completion rate were 56.5% and 48.7%, respectively. Data agreement between the two methods was excellent for whether the baby was breastfed yesterday (question 1) (kappa, κ = 0.81), moderate for the times of drinking infant formula, fresh milk or yoghurt yesterday (question 2) (intraclass correlation coefficient, ICC = 0.46) and whether iron fortified food or iron supplement was consumed (question 3) (κ = 0.44), and poor for 24–hour dietary recall (question 4) (ICC = 0.13) and times of eating solid and semi–solid food yesterday (question 5) (ICC = 0.06). There was no significant difference in data agreement between the two surveys at different time intervals. For infant and young child feeding indicators from both surveys, continued breastfeeding at 1 year (P = 1.000), continued breastfeeding at 2 years (P = 0.688) and minimum meal frequency (P = 0.056) were not significantly

Two-loop feed water control system in BWR plants

International Nuclear Information System (INIS)

Omori, Takashi; Watanabe, Takao; Hirose, Masao.

1982-01-01

In the process of the start-up and shutdown of BWR plants, the operation of changing over feed pumps corresponding to plant output is performed. Therefore, it is necessary to develop the automatic changeover system for feed pumps, which minimizes the variation of water level in reactors and is easy to operate. The three-element control system with the water level in reactors, the flow rate of main steam and the flow rate of feed water as the input is mainly applied, but long time is required for the changeover of feed pumps. The two-loop feed control system can control simultaneously two pumps being changed over, therefore it is suitable to the automatic changeover control system for feed pumps. Also it is excellent for the control of the recirculating valves of feed pumps. The control characteristics of the two-loop feed water control system against the external disturbance which causes the variation of water level in reactors were examined. The results of analysis by simulation are reported. The features of the two-loop feed water control system, the method of simulation and the evaluation of the two-loop feed water control system are described. Its connection with a digital feed water recirculation control system is expected. (Kako, I.)

Developing a workplace breast feeding support model for employed lactating mothers.

Science.gov (United States)

Yimyam, Susanha; Hanpa, Wasana

2014-06-01

Resuming work is often considered an obstacle for continued breast feeding. The objectives of this participatory action research study were to develop a breast feeding support model in the workplace and to compare breast feeding rates before and after implementation of the breast feeding support campaign. Twenty-four women participated before the implementation of the breast feeding support campaign, whereas 31 women participated after the campaign. Data were collected by interviewing employed women about their breast feeding practices within six months post partum. Additional data were collected through interviews with the workplace administrator and head of work sections as well as observation of the breast feeding support campaigns. Qualitative data were analysed using thematic analysis, whereas quantitative data were analysed using descriptive statistics and χ(2) test. The workplace breast feeding support model was developed based on the concept of Mother-Friendly Workplace Initiatives by the World Alliance for Breastfeeding Action (WABA) and the Thai government׳s promotion of a workplace breast feeding corner. Within this model, a committee for breast feeding support was created for working with the research team to develop breast feeding activities and media for breast feeding education and breast feeding support campaigns in the workplace. Breast feeding rates at six months after implementation of the breast feeding support campaign were significantly higher than rates before, both for exclusive breast feeding and any breast feeding at levels .004 and .033, respectively. These results suggest that breast feeding should be encouraged in every workplace depending on context. Individual advice and help for employed mothers should be provided from pregnancy through weaning in the postpartum period. Copyright © 2014 Elsevier Ltd. All rights reserved.

EFFECT OF MELTER-FEED-MAKEUP ON VITRIFICATION PROCESS

International Nuclear Information System (INIS)

Kruger, A.A.; Hrma, P.R.; Schweiger, M.J.; Humrickhouse, C.J.; Moody, J.A.; Tate, R.M.; Tegrotenhuis, N.E.; Arrigoni, B.M.; Rodriguez, C.P.

2009-01-01

Increasing the rate of glass processing in the Hanford Tank Waste Treatment and Immobilization Plant (WTP) will allow shortening the life cycle of waste cleanup at the Hanford Site. While the WTP melters have approached the limit of increasing the rate of melting by enhancing the heat transfer rate from molten glass to the cold cap, a substantial improvement can still be achieved by accelerating the feed-to-glass conversion kinetics. This study investigates how the feed-to-glass conversion process responds to the feed makeup. By identifying the means of control of primary foam formation and silica grain dissolution, it provides data needed for a meaningful and economical design of large-scale experiments aimed at achieving faster melting

The Effect of Different Feed and Stocking Densities on Growth And Survival Rate Of Blue Swimming Crablets (Portunus pelagicus)

Science.gov (United States)

Ariyati, R. W.; Rejeki, S.; Bosma, R. H.

2018-02-01

Blue swimming crab is targeted by commercial fisheries because of the high economic value, good taste, and attractive colors. As a result, the stock is overexploited and fisherman catch market also juveniles. The most sustainable solution would be to stop fishing for commercial trade and to culture this crab from brood to market size. This study aimed to find the best feed and stocking density for the on-growing of crablets. In 20 tanks juvenile crabs with a carapace width±1 cm were stocked in three densities; 40, 60 and 80 crablets / m2, and fed ad-libitum twice a day with either trash fish or pellets of shrimp feed, for 8 weeks. The circular (ᴓ 1.6 m x 1 m) tanks with 1 m3 of water were aerated, and temperature, salinity, dissolved oxygen and pH recorded daily. In the end, growth and survival rates were determined. In general, feeding the crablets at a density of 40 m-2 gave the highest growth. For crablest fed with pellets, the density of 40 m-2 gave significantly better growth than 80 m-2. The crablets at a density 40 m-2 having a fish diet with the density 40 m-2 grew better than 60 and 80 m-2. There was no significant difference between fed used among different densities. The lower densities resulted in higher survival, either on crablets fed with pellets or fish. But, crablets fed the fish diet and cultured in the lowest density (40 m-2) had the highest survival rate.

Influence of the menstrual cycle and of menopause on the gastric emptying rate of solids in female volunteers

Energy Technology Data Exchange (ETDEWEB)

Mones, J. (Dept. of Gastroenterology, Hospital de la Santa Creu i Sant Pau, Univ. Autonoma de Barcelona (Spain)); Carrio, I. (Dept. of Nuclear Medicine, Hospital de la Santa Creu i Sant Pau, Univ. Autonoma de Barcelona (Spain)); Calabuig, R. (Dept. of Gastroenterology, Hospital de la Santa Creu i Sant Pau, Univ. Autonoma de Barcelona (Spain)); Estorch, M. (Dept. of Nuclear Medicine, Hospital de la Santa Creu i Sant Pau, Univ. Autonoma de Barcelona (Spain)); Sainz, S. (Dept. of Gastroenterology, Hospital de la Santa Creu i Sant Pau, Univ. Autonoma de Barcelona (Spain)); Berna, L. (Dept. of Nuclear Medicine, Hospital de la Santa Creu i Sant Pau, Univ. Autonoma de Barcelona (Spain)); Vilardell, F. (Dept. of Gastroenterology, Hospital de la Santa Creu i Sant Pau, Univ. Autonoma de Barcelona (Spain))

1993-07-01

The aim of this study was to assess the influence of the normal menstrual cycle and of menopause on the gastric emptying rate of solids. Gastric emptying was studied in 15 premenopausal and ten postmenopausal women with an isotopic technique after the ingestion of a radiolabelled test meal. Premenopausal women were studied twice: Within 1 week prior to menses and again 1 week after onset of menses. Postmenopausal women were studied only once. The emptying curves of the solid component of the meal fitted a linear model. The half-emptying time was 78[+-]5 min during the follicular phase, 75[+-]7 min during the luteal phase and 76[+-]6 min in postmenopausal women (differences not statistically significant). The mean percentages of the meal retained in the stomach at different time intervals were also similar in the three groups. These results suggest that the menstrual cycle does not influence the gastric emptying rate of solids, which remains unchanged in relation to the follicular phase or after menopause. (orig.)

Impact of Skip a Day and Every Day Feeding Programs on the Colonization Rates of Salmonella Enteritidis in Broiler Breeder Pullets

Science.gov (United States)

The impact of feeding programs in the colonization rate after challenge with Salmonella enteritidis was investigated. Broiler breeder pullets from were vaccinated at 19 d of incubation with herpesvirus of turkeys (HVT) + chicken herpesvirus (SB1), or a vector HVT (vHVT) + Infectious bursal disease (...

Effects of Feeding Frequency on Growth, Feed Consumption, and Body Composition in Juvenile Turbot (Psetta maxima Linnaeus, 1758) at Low Temperature

OpenAIRE

TÜRKER, Ali

2014-01-01

Juvenile turbot Psetta maxima (Linnaeus, 1758) (15.23 ± 2.99 g) were fed to satiation with a commercial extruded feed over a 60-day period. Feeding regimens were twice a day (TD), every other day (EOD), and 2-day intervals (TDI). Fish were kept in seawater (18 ppt) at 5-7.5 °C from January 21 to March 23, 2004. Feed conversion rate (FCR) and the protein efficiency ratios (PER) were within the ranges of 1.12-1.14 and 2.26-2.29, respectively. While the maximum relative growth rate (RGR), weight...

Preparation and evaluation of azithromycin binary solid dispersions using various polyethylene glycols for the improvement of the drug solubility and dissolution rate

Directory of Open Access Journals (Sweden)

Ehsan Adeli

Full Text Available ABSTRACT Azithromycin is a water-insoluble drug, with a very low bioavailability. In order to increase the solubility and dissolution rate, and consequently increase the bioavailability of poorly-soluble drugs (such as azithromycin, various techniques can be applied. One of such techniques is "solid dispersion". This technique is frequently used to improve the dissolution rate of poorly water-soluble compounds. Owing to its low solubility and dissolution rate, azithromycin does not have a suitable bioavailability. Therefore, the main purpose of this investigation was to increase the solubility and dissolution rate of azithromycin by preparing its solid dispersion, using different Polyethylene glycols (PEG. Preparations of solid dispersions and physical mixtures of azithromycin were made using PEG 4000, 6000, 8000, 12000 and 20000 in various ratios, based on the solvent evaporation method. From the studied drug release profile, it was discovered that the dissolution rate of the physical mixture, as the well as the solid dispersions, were higher than those of the drug alone. There was no chemical incompatibility between the drug and polymer from the observed Infrared (IR spectra. Drug-polymer interactions were also investigated using Differential Scanning Calorimetry (DSC, Powder X-Ray Diffraction (PXRD and Scanning Election Microscopy (SEM. In conclusion, the dissolution rate and solubility of azithromycin were found to improve significantly, using hydrophilic carriers, especially PEG 6000.

Effect Of Adding Sago Flour In Yoghurt Based On Viscosity, Overrun, Melting Rate And Total Solid Of Yoghurt Ice Cream

Directory of Open Access Journals (Sweden)

Ika Ayu Wijayanti

2017-03-01

Full Text Available The purpose of this research was to find out the best concentration of adding sago flour in yoghurt based on viscosity, overrun, melting rate and total solid of yoghurt ice cream. The experiment was designed by Completely Randomized Design (CRD using four treatments were 0 %, 2 %, 4 %, 6 % from volume of fresh milk and four replication. The data were analyzed by using Analysis of Variance (ANOVA and continued by Duncan’s Multiple Range Test (DMRT. Result of this research showed that concentration of adding sago flour in yoghurt gave highly significant difference effect (P<0.01 on viscosity, overrun, melting rate and total solid of yoghurt ice cream. It can be concluded that the adding of sago flour 2% in yoghurt gave the best result with the viscosity was 1750.75 cP, overrun was 25.14%, melting rate was 39.13 minutes/50 g, total solid was 36.20% and gave the best quality of yoghurt ice cream.

At-tank Low-Activity Feed Homogeneity Analysis Verification

International Nuclear Information System (INIS)

DOUGLAS, J.G.

2000-01-01

This report evaluates the merit of selecting sodium, aluminum, and cesium-137 as analytes to indicate homogeneity of soluble species in low-activity waste (LAW) feed and recommends possible analytes and physical properties that could serve as rapid screening indicators for LAW feed homogeneity. The three analytes are adequate as screening indicators of soluble species homogeneity for tank waste when a mixing pump is used to thoroughly mix the waste in the waste feed staging tank and when all dissolved species are present at concentrations well below their solubility limits. If either of these conditions is violated, then the three indicators may not be sufficiently chemically representative of other waste constituents to reliably indicate homogeneity in the feed supernatant. Additional homogeneity indicators that should be considered are anions such as fluoride, sulfate, and phosphate, total organic carbon/total inorganic carbon, and total alpha to estimate the transuranic species. Physical property measurements such as gamma profiling, conductivity, specific gravity, and total suspended solids are recommended as possible at-tank methods for indicating homogeneity. Indicators of LAW feed homogeneity are needed to reduce the U.S. Department of Energy, Office of River Protection (ORP) Program's contractual risk by assuring that the waste feed is within the contractual composition and can be supplied to the waste treatment plant within the schedule requirements

High efficiency cell-recycle continuous sodium gluconate production by Aspergillus niger using on-line physiological parameters association analysis to regulate feed rate rationally.

Science.gov (United States)

Lu, Fei; Li, Chao; Wang, Zejian; Zhao, Wei; Chu, Ju; Zhuang, Yingping; Zhang, Siliang

2016-11-01

In this paper, a system of cell-recycle continuous fermentation for sodium gluconate (SG) production by Aspergillus niger (A. niger) was established. Based on initial continuous fermentation result (100.0h) with constant feed rate, an automatic feedback strategy to regulate feed rate using on-line physiological parameters (OUR and DO) was proposed and applied successfully for the first time in the improved continuous fermentation (240.5h). Due to less auxiliary time, highest SG production rate (31.05±0.29gL(-1)h(-1)) and highest yield (0.984±0.067molmol(-1)), overall SG production capacity (975.8±5.8gh(-1)) in 50-L fermentor of improved continuous fermentation increased more than 300.0% compared to that of batch fermentation. Improvement of mass transfer and dispersed mycelia morphology were the two major reasons responsible for the high SG production rate. This system had been successfully applied to industrial fermentation and SG production was greatly improved. Copyright © 2016 Elsevier Ltd. All rights reserved.

Phonon conductivity and relaxation rate in solids with disturbances by the Green function method

International Nuclear Information System (INIS)

Singh, M.

1980-09-01

In this present article we have established an expression for the temperature dependence of the lattice thermal conductivity of solids with harmonic disturbances. The relaxation rate for scattering of phonons with point defect is also derived. We will apply the Kubo-correlation function formalism for the thermal conductivity, and the double time temperature dependent Green function technique for the evaluation of correlation functions

Chronic ethanol feeding modulates the synthesis of digestive enzymes

International Nuclear Information System (INIS)

Ponnappa, B.C.; Hoek, J.B.; Rubin, E.

1987-01-01

The effects of chronic ethanol feeding on pancreatic protein synthesis were investigated. Protein synthesis was assessed by studying the rate of incorporation of 3 H-leucine into TCA-precipitable proteins in isolated pancreatic acini from rats. Chronic ethanol ingestion increased the rate of pancreatic protein synthesis by 2-4 fold. The onset of the increase in protein synthesis was detectable two days after ethanol feeding, reached a maximum after 7 days and remained unchanged after 4 months on the ethanol-containing diet. The rate of synthesis of individual digestive enzymes was studied by SDS-PAGE on extracts obtained from purified zymogen granules. Ethanol feeding induced an increase in the rate of synthesis of most of the digestive enzymes; chymotrypsinogen, trypsinogen and an unidentified protein were increased to a greater extent than other digestive enzymes. By contrast, the synthesis of amylase was selectively decreased after ethanol feeding. These results suggest that chronic ethanol ingestion has specific effects on the rate of synthesis of individual digestive enzymes in the exocrine pancreas

An investigation of Breast Feeding Self Efficacy and its Relationship with exclusive breast feeding

Directory of Open Access Journals (Sweden)

L. Rahmatnejad

2012-02-01

Full Text Available Child nutrition in different aspects is important in the first years especially the first two years after birth. The most important feature of this period is that the physical and cerebral damage of malnutrition after this period is not compensable. Successful breastfeeding not only depends on psychological and social factors, but also depends on the physiological conditions that can affect the onset of lactation. In addition, other factors are involved in the duration of breastfeeding including: age and maternal education, family income, the first time to decide for breastfeeding, First time feeding, maternal skill and breastfeeding self-efficacy. The aim of this study, was to determine breastfeeding self efficacy and its relationship with exclusive breast-feeding. In this descriptive study, the data collection instrument, was a questionnaire consisted of the demographic characteristics and standard items of breastfeeding self efficacy. The number of participants in this study was 331 persons that selected continuously from the Primiparous women at Shahid Akbarabadi hospital in Tehran. The findings of this study showed promising results in all samples studied, standard deviation and mean score of breastfeeding self-efficacy in exclusive breast-feeding group was 53.64±9.8 and in non exclusive breast-feeding group was 46.11±9.23, which showed that the mothers with exclusive breast-feeding, had higher breastfeeding self-efficacy scores than those fed with the non-exclusive. Therefore according to the reported reduced rate of breast feeding in the recent years, it is necessary to provide appropriate strategies in order to increase breastfeeding self efficacy, especially in primiparous mothers in order to increase breastfeeding rates.

Digital image processing based mass flow rate measurement of gas/solid two-phase flow

Energy Technology Data Exchange (ETDEWEB)

Song Ding; Peng Lihui; Lu Geng; Yang Shiyuan [Tsinghua National Laboratory for Information Science and Technology, Department of Automation, Tsinghua University, Beijing, 100084 (China); Yan Yong, E-mail: lihuipeng@tsinghua.edu.c [University of Kent, Canterbury, Kent CT2 7NT (United Kingdom)

2009-02-01

With the rapid growth of the process industry, pneumatic conveying as a tool for the transportation of a wide variety of pulverized and granular materials has become widespread. In order to improve plant control and operational efficiency, it is essential to know the parameters of the particle flow. This paper presents a digital imaging based method which is capable of measuring multiple flow parameters, including volumetric concentration, velocity and mass flow rate of particles in the gas/solid two phase flow. The measurement system consists of a solid state laser for illumination, a low-cost CCD camera for particle image acquisition and a microcomputer with bespoke software for particle image processing. The measurements of particle velocity and volumetric concentration share the same sensing hardware but use different exposure time and different image processing methods. By controlling the exposure time of the camera a clear image and a motion blurred image are obtained respectively. The clear image is thresholded by OTSU method to identify the particles from the dark background so that the volumetric concentration is determined by calculating the ratio between the particle area and the total area. Particle velocity is derived from the motion blur length, which is estimated from the motion blurred images by using the travelling wave equation method. The mass flow rate of particles is calculated by combining the particle velocity and volumetric concentration. Simulation and experiment results indicate that the proposed method is promising for the measurement of multiple parameters of gas/solid two-phase flow.

Digital image processing based mass flow rate measurement of gas/solid two-phase flow

International Nuclear Information System (INIS)

Song Ding; Peng Lihui; Lu Geng; Yang Shiyuan; Yan Yong

2009-01-01

With the rapid growth of the process industry, pneumatic conveying as a tool for the transportation of a wide variety of pulverized and granular materials has become widespread. In order to improve plant control and operational efficiency, it is essential to know the parameters of the particle flow. This paper presents a digital imaging based method which is capable of measuring multiple flow parameters, including volumetric concentration, velocity and mass flow rate of particles in the gas/solid two phase flow. The measurement system consists of a solid state laser for illumination, a low-cost CCD camera for particle image acquisition and a microcomputer with bespoke software for particle image processing. The measurements of particle velocity and volumetric concentration share the same sensing hardware but use different exposure time and different image processing methods. By controlling the exposure time of the camera a clear image and a motion blurred image are obtained respectively. The clear image is thresholded by OTSU method to identify the particles from the dark background so that the volumetric concentration is determined by calculating the ratio between the particle area and the total area. Particle velocity is derived from the motion blur length, which is estimated from the motion blurred images by using the travelling wave equation method. The mass flow rate of particles is calculated by combining the particle velocity and volumetric concentration. Simulation and experiment results indicate that the proposed method is promising for the measurement of multiple parameters of gas/solid two-phase flow.

EVALUATION OF DIFFERENT FEEDING FREQUENCIES ON ...

African Journals Online (AJOL)

USER

EVALUATION OF DIFFERENT FEEDING FREQUENCIES ON GROWTH .... using one-way analysis of variance (ANOVA) and ... SGR = Specific Growth Rate, FCR = Food Conversion Ratio, K = Condition Factor and SR = Survival Rate.

Effect of The Phytase Enzyme Addition in The Artificial Feed on Digestibility of Feed, Feed Conversion Ratio and Growth of Gift Tilapia Saline Fish (Oreochromis niloticus) Nursery Stadia I

Science.gov (United States)

Rachmawati, Diana; Samidjan, Istiyanto; Elfitasari, Tita

2018-02-01

The purpose of this study was to determine the effect of adding the phytase enzyme in the artificial feed on digestibility of feed, feed conversion ratio and growth of gift tilapia saline fish (Oreochromis niloticus) nursery stadia I. The fish samples in this study used gift tilapia saline fish (O. niloticus) with an average weight of 0,62 ± 0,008 g/fish and the stocking density of 1 fish1 L. Experimental method used in this study was completely randomized design with 4 treatments and 3 repetitions. The treatments were by adding phytase enzyme in artificial feed with the different level of doses those were A (0 FTU kg1 feed), B (500 FTU kg1 feed), C (1000 FTU kg1 feed) and D (1500 FTU kg1 feed). The results show that the addition of phytase enzyme was significantly (P0.05) affected on Survival Rate (SR) of gift tilapia saline fish. The optimum doses of phytase enzyme on RGR, FCR, PER, ADCP and ADCF of gift tilapia saline fish ranged from 1060 to 1100 FTU kg-1 feed.

NPY/AgRP neurons are not essential for feeding responses to glucoprivation.

Science.gov (United States)

Luquet, Serge; Phillips, Colin T; Palmiter, Richard D

2007-02-01

Animals respond to hypoglycemia by eating and by stimulating gluconeogenesis. These responses to glucose deprivation are initiated by glucose-sensing neurons in the brain, but the neural circuits that control feeding behavior are not well established. Neurons in the arcuate region of the hypothalamus that express neuropeptide Y (NPY) and agouti-related protein (AgRP) have been implicated in mediating the feeding response to glucoprivation. We devised a method to selectively ablate these neurons in neonatal mice and then tested adult mice for their feeding responses to fasting, mild hypoglycemia, 2-deoxy-d-glucose and a ghrelin receptor agonist. Whereas the feeding response to the ghrelin receptor agonist was completely abrogated, the feeding response to glucoprivation was normal. The feeding response after a fast was attenuated when standard chow was available but normal with more palatable solid or liquid diet. We conclude that NPY/AgRP neurons are not necessary for generating or mediating the orexigenic response to glucose deficiency, but they are essential for the feeding response to ghrelin and refeeding on standard chow after a fast.

Japanese beetle Popillia japonica Newman : foliar feeding on wine grapes in Virginia

OpenAIRE

Boucher, T. Jude

1986-01-01

The natural infestation level for 1985 of the Japanese beetle, Popillia japonica Newman, in the Shenandoah Valley of Virginia failed to reduce berry quality, yield or shoot growth in a commercial vineyard. Intensive postveraison foliage feeding by Japanese beetle resulted 1n fruit with lower soluble solids and higher total titratable acidity at harvest, but did not affect pH, sugar per berry, berry weight, yield, leaves per vine or shoot length. Intensive previraison feeding a...

Craving Ravens: Individual ‘haa’ Call Rates at Feeding Sites as Cues to Personality and Levels of Fission-Fusion Dynamics?

Directory of Open Access Journals (Sweden)

Georgine Szipl

2014-08-01

Full Text Available Common ravens aggregate in large non-breeder flocks for roosting and foraging until they achieve the status of territorial breeders. When discovering food, they produce far-reaching yells or ‘haa’ calls, which attract conspecifics. Due to the high levels of fission-fusion dynamics in non-breeders’ flocks, assemblies of feeding ravens were long thought to represent anonymous aggregations. Yet, non-breeders vary in their degree of vagrancy, and ‘haa’ calls convey individually distinct acoustic features, which are perceived by conspecifics. These findings give rise to the assumption that raven societies are based on differential social relationships on an individual level. We investigated the occurrence of ‘haa’ calling and individual call rates in a group of individually marked free-ranging ravens. Calling mainly occurred in subadult and adult females, which showed low levels of vagrancy. Call rates differed significantly between individuals and with residency status, and were correlated with calling frequency and landing frequency. Local ravens called more often and at higher rates, and were less likely to land at the feeding site than vagrant birds. The results are discussed with respect to individual degrees of vagrancy, which may have an impact on social knowledge and communication in this species.

Evaluation of the performance of different anaerobic digestion technologies for solid waste treatment

Energy Technology Data Exchange (ETDEWEB)

Chavez-Vazquez, M.; Bagley, D.M. [Univ. of Toronto, Dept. of Civil Engineering, Toronto, Ontario (Canada)

2002-06-15

The anaerobic digestion of solid wastes is now a widely-used technology in Europe with more than 50 full-scale plants operating. However, anaerobic solid waste digestion is still used to only a limited extent in North America with only three facilities in Canada. Because of the expected importance of anaerobic digestion in the future for energy recovery, reliable tools are required to evaluate the different available technologies, as well as the feed stocks that are suitable for treatment. Therefore, this paper presents a framework that has been developed for evaluating anaerobic solid waste digestion. To develop the framework, a review of the performance of digestion processes was first conducted. Because the data presented were for very different operational parameters (retention time, temperature, configuration set up, mixing, etc.) as well as substrates used for digestion, a standard method of comparison was developed. Gas production per Mg input, organic loading rate and percent volatile solids removal were identified as useful standard parameters for evaluating the performance of different technologies. This framework was constructed as a spread sheet and can be used for different set ups (configuration, organic loading rate, etc.) and with different substrates. It can predict, based on the input and using mass balances, the mass of products of the digester including biogas, treated solids and water. This framework provides a useful tool for evaluating the technical capabilities of different technologies, predicting the quantity of the products, and ultimately, making decisions as to which technologies best meet local needs. (author)

Evaluation of the performance of different anaerobic digestion technologies for solid waste treatment

International Nuclear Information System (INIS)

Chavez-Vazquez, M.; Bagley, D.M.

2002-01-01

The anaerobic digestion of solid wastes is now a widely-used technology in Europe with more than 50 full-scale plants operating. However, anaerobic solid waste digestion is still used to only a limited extent in North America with only three facilities in Canada. Because of the expected importance of anaerobic digestion in the future for energy recovery, reliable tools are required to evaluate the different available technologies, as well as the feed stocks that are suitable for treatment. Therefore, this paper presents a framework that has been developed for evaluating anaerobic solid waste digestion. To develop the framework, a review of the performance of digestion processes was first conducted. Because the data presented were for very different operational parameters (retention time, temperature, configuration set up, mixing, etc.) as well as substrates used for digestion, a standard method of comparison was developed. Gas production per Mg input, organic loading rate and percent volatile solids removal were identified as useful standard parameters for evaluating the performance of different technologies. This framework was constructed as a spread sheet and can be used for different set ups (configuration, organic loading rate, etc.) and with different substrates. It can predict, based on the input and using mass balances, the mass of products of the digester including biogas, treated solids and water. This framework provides a useful tool for evaluating the technical capabilities of different technologies, predicting the quantity of the products, and ultimately, making decisions as to which technologies best meet local needs. (author)

Predictors for early introduction of solid food among Danish mothers and infants: an observational study

DEFF Research Database (Denmark)

Kronborg, Hanne; Foverskov, Else; Væth, Michael

2014-01-01

introduced to solid food. Full breastfeeding at five weeks was the most influential predictor for later introduction of solid food (OR = 2.52 CI: 1.93-3.28). Among infant factors male gender, increased gestational age at birth, and higher birth weight were found to be statistically significant predictors......BACKGROUND: Early introduction of complementary feeding may interfere with breastfeeding and the infant's self-controlled appetite resulting in increased growth. The aim of the present study was to investigate predictors for early introduction of solid food. METHODS: In an observational study...... Danish mothers filled in a self-administered questionnaire approximately six months after birth. The questionnaire included questions about factors related to the infant, the mother, attachment and feeding known to influence time for introduction of solid food. The study population consisted of 4503...

The relationship between different measures of feed efficiency and feeding behavior traits in Duroc pigs.

Science.gov (United States)

Lu, D; Jiao, S; Tiezzi, F; Knauer, M; Huang, Y; Gray, K A; Maltecca, C

2017-08-01

Utilization of feed in livestock species consists of a wide range of biological processes, and therefore, its efficiency can be expressed in various ways, including direct measurement, such as daily feed intake, as well as indicator measures, such as feeding behavior. Measuring feed efficiency is important to the swine industry, and its accuracy can be enhanced by using automated feeding systems, which record feed intake and associated feeding behavior of individual animals. Each automated feeder space is often shared among several pigs and therefore raises concerns about social interactions among pen mates with regard to feeding behavior. The study herein used a data set of 14,901 Duroc boars with individual records on feed intake, feeding behavior, and other off-test traits. These traits were modeled with and without the random spatial effect of Pen_Room, a concatenation of room and pen, or random social interaction among pen mates. The nonheritable spatial effect of common Pen-Room was observed for traits directly measuring feed intake and accounted for up to 13% of the total phenotypic variance in the average daily feeding rate. The social interaction effect explained larger proportions of phenotypic variation in all the traits studied, with the highest being 59% for ADFI in the group of feeding behaviors, 73% for residual feed intake (RFI; RFI4 and RFI6) in the feed efficiency traits, and 69% for intramuscular fat percentage in the off-test traits. After accounting for the social interaction effect, residual BW gain and RFI and BW gain (RIG) were found to have the heritability of 0.38 and 0.18, respectively, and had strong genetic correlations with growth and off-test traits. Feeding behavior traits were found to be moderately heritable, ranging from 0.14 (ADFI) to 0.52 (average daily occupation time), and some of them were strongly correlated with feed efficiency measures; for example, there was a genetic correlation of 0.88 between ADFI and RFI6. Our work

Health and Safety Aspects of Solid Biomass Storage, Transportation and Feeding

Energy Technology Data Exchange (ETDEWEB)

Koppejan, J. [Procede Biomass, Enschede (Netherlands); Loennermark, A.; Persson, H.; Larsson, I.; Blomqvist, P. [SP Technical Research Institute of Sweden, Boraas (Sweden); Arshadi, M.; Valencia-Reyes, E. [Swedish University of Agricultural Sciences, Uppsala (Sweden); Melin, S. [University of British Columbia, Vancouver, BC (Canada); Howes, Pat [AEA Group, London (United Kingdom); Wheeler, P. [Lend Lease, Sydney (Australia); Baxter, D. [Joint Research Institute JRC, European Commission EC, Brussels (Belgium); Nikolaisen, L. [Danish Technological Institute, Taastrup (Denmark)

2013-05-15

This publication focuses on the health and safety issues of the supply chain of solid biofuels with the objective to highlight commonly used mitigation methodologies to promote a better working environment when dealing with solid biofuels. It has been compiled as a joint effort by experts active in Tasks 32, 36, 37 and 40 of the IEA Bioenergy Agreement, with their own specific fields of expertise. Only through this cooperation, it was possible to touch upon the full range of issues in one publication that one may come across when developing projects in which solid biomass fuels are produced, traded or used. The properties of a biomass material and the intended use determine how the material should be safely transported and stored. Selfheating, off-gassing and dust explosions are significant challenges for the industry that have already resulted in significant losses of capital investments and even tragic loss of life. Likewise, exposure to biologically active material, such as moulds and spores may form a serious hazard for the health of workers involved. With the growth of the bioenergy sector, it is important not only that opportunities for bioenergy are implemented in an efficient and economic manner, but also safely.

Weather influences feed intake and feed efficiency in a temperate climate.

Science.gov (United States)

Hill, Davina L; Wall, Eileen

2017-03-01

A key goal for livestock science is to ensure that food production meets the needs of an increasing global population. Climate change may heighten this challenge through increases in mean temperatures and in the intensity, duration, and spatial distribution of extreme weather events, such as heat waves. Under high ambient temperatures, livestock are expected to decrease dry matter intake (DMI) to reduce their metabolic heat production. High yielding dairy cows require high DMI to support their levels of milk production, but this may increase susceptibility to heat stress. Here, we tested how feed intake and the rate of converting dry matter to milk (feed efficiency, FE) vary in response to natural fluctuations in weather conditions in a housed experimental herd of lactating Holstein Friesians in the United Kingdom. Cows belonged to 2 lines: those selected for high genetic merit for milk traits (select) and those at the UK average (control). We predicted that (1) feed intake and FE would vary with an index of temperature and humidity (THI), wind speed, and the number of hours of sunshine, and that (2) the effects of (1) would depend on the cows' genetic merit. Animals received a mixed ration, available ad libitum, from automatic feed measurement gates. Using >73,000 daily feed intake and FE records from 328 cows over 8 yr, we found that select cows produced more fat- and protein-corrected milk, and had higher DMI and FE than controls. Cows of both lines decreased DMI and fat- and protein-corrected milk but, importantly, increased FE as THI increased. This suggests that improvements in the efficiency of converting feed to milk may partially offset the costs of reduced milk yield owing to a warmer climate, at least under conditions of mild heat stress. The rate of increase in FE with THI was steeper in select cows than in controls, which raises the possibility that select cows use more effective coping tactics. This is, to our knowledge, the first longitudinal study

Effect of feed type and method of presentation on feeding behavior, intake, and growth of dairy calves fed a high level of milk.

Science.gov (United States)

Overvest, M A; Bergeron, R; Haley, D B; DeVries, T J

2016-01-01

The objective of this study was to assess the effect of different feed types and method of feed presentation in the first 12 wk of life on the feeding behavior, intake, and growth of calves fed a high milk level. Forty-eight neonatal Holstein calves were individually housed and randomly assigned to 1 of 4 treatments and fed solid feed ad libitum: silage-based total mixed ration (TMR), concentrate (CON), and chopped hay and concentrate presented in 2 manners: mixed (MIX) or separate (SEP). All calves were offered 12 L/d of acidified milk replacer (1.8 kg of dry matter) until d 38 at which time step-down weaning by 1 L/d began. At d 50 calves no longer received milk, and all calves on SEP and CON treatments were offered the MIX diet until the end of the trial, whereas TMR and MIX calves did not change feeds. Feed intakes were recorded daily, and calves were weighed twice per week. Rumination time was observed on the last 3 d of alternate weeks (wk 3, 5, 7, 9, and 11) for 1h beginning at 1500 h. Time spent feeding was determined for the last 2 d of alternate weeks. In the preweaning stage (d 1-37) average daily gain was similar for all calves (1.1 kg/d). The TMR calves had lower average daily gain than calves on the other 3 treatments during both the weaning (d 38-49; 0.2 vs. 0.7 kg/d) and postweaning (d 50-84; 0.5 vs. 1.2 kg/d) stages. This result is related to the lower dry matter intake of calves fed TMR in comparison with MIX, SEP, and CON calves in the weaning (0.2 vs. 0.5 kg/d) and postweaning (1.8 vs. 2.8 kg/d) stages. Given dry matter content of the feeds (TMR=52%, other diets=89%), the as-fed intake of the calves was similar across treatments in all 3 stages. Calves offered hay in addition to concentrate showed no difference in concentrate intake in the first 7 wk of life. Interestingly, TMR calves spent more time feeding during the postweaning stage than MIX, SEP, and CON calves (308 vs. 194 min/d) and exhibited a slower feeding rate postweaning (5.9 vs. 14

Analysis of field usage failure rate data for plastic encapsulated solid state devices

Science.gov (United States)

1981-01-01

Survey and questionnaire techniques were used to gather data from users and manufacturers on the failure rates in the field of plastic encapsulated semiconductors. It was found that such solid state devices are being successfully used by commercial companies which impose certain screening and qualification procedures. The reliability of these semiconductors is now adequate to support their consideration in NASA systems, particularly in low cost systems. The cost of performing necessary screening for NASA applications was assessed.

Generator module architecture for a large solid oxide fuel cell power plant

Science.gov (United States)

Gillett, James E.; Zafred, Paolo R.; Riggle, Matthew W.; Litzinger, Kevin P.

2013-06-11

A solid oxide fuel cell module contains a plurality of integral bundle assemblies, the module containing a top portion with an inlet fuel plenum and a bottom portion receiving air inlet feed and containing a base support, the base supports dense, ceramic exhaust manifolds which are below and connect to air feed tubes located in a recuperator zone, the air feed tubes passing into the center of inverted, tubular, elongated, hollow electrically connected solid oxide fuel cells having an open end above a combustion zone into which the air feed tubes pass and a closed end near the inlet fuel plenum, where the fuel cells comprise a fuel cell stack bundle all surrounded within an outer module enclosure having top power leads to provide electrical output from the stack bundle, where the fuel cells operate in the fuel cell mode and where the base support and bottom ceramic air exhaust manifolds carry from 85% to all 100% of the weight of the stack, and each bundle assembly has its own control for vertical and horizontal thermal expansion control.

Composition, production rate and characterization of Greek dental solid waste.

Science.gov (United States)

Mandalidis, Alexandros; Topalidis, Antonios; Voudrias, Evangelos A; Iosifidis, Nikolaos

2018-05-01

The overall objective of this work is to determine the composition, characterization and production rate of Greek dental solid waste (DSW). This information is important to design and cost management systems for DSW, for safety and health considerations and for assessing environmental impact. A total of 141 kg of DSW produced by a total of 2542 patients in 20 dental practices from Xanthi, Greece was collected, manually separated and weighed over a period of four working weeks. The waste was separated in 19 sub fractions, which were classified in 2 major categories, according to Greek regulations: Domestic-type waste comprising 8% and hazardous waste comprising 92% by weight of total DSW. The latter was further classified in infectious waste, toxic waste and mixed type waste (infectious and toxic together), accounting for 88.5%, 3.5% and 0.03% of total DSW by weight, respectively. The overall unit production rates (mean ± standard error of the mean) were 381 ± 15 g/practice/d and 53.3 ± 1.4 g/patient/d for total DSW, 337 ± 14 g/practice/d and 46.6 ± 1.2 g/patient/d for total infectious DSW, 13.4 ± 0.7 g/practice/d and 2.1 ± 0.1 g/patient/d for total toxic DSW and 30.4 ± 2.5 g/practice/d and 4.6 ± 0.4 g/patient/d for domestic-type waste. Daily DSW production was correlated with daily number of patients and regression correlations were produced. DSW was subject to laboratory characterization in terms of bulk density, calorific value, moisture, ash and volatile solids content. Measured calorific values were compared to predictions from empirical models. Copyright © 2018 Elsevier Ltd. All rights reserved.

Effects of solid feed level and roughage-to-concentrate ratio on ruminal drinking and passage kinetics of milk replacer, concentrates, and roughage in veal calves.

Science.gov (United States)

Berends, H; van den Borne, J J G C; Stockhofe-Zurwieden, N; Gilbert, M S; Zandstra, T; Pellikaan, W F; van Reenen, C G; Bokkers, E A M; Gerrits, W J J

2015-08-01

Effects of solid feed (SF) level and roughage-to-concentrate (R:C) ratio on ruminal drinking and passage kinetics of milk replacer, concentrate, and roughage were studied in veal calves. In total, 80 male Holstein-Friesian calves (45±0.2kg of body weight) were divided over 16 pens (5 calves per pen). Pens were randomly assigned to either a low (LSF) or a high (HSF) SF level and to 1 of 2 R:C ratios: 20:80 or 50:50 on a dry matter (DM) basis. Roughage was composed of 50% corn silage and 50% chopped wheat straw on a DM basis. At 27 wk of age, measurements were conducted in 32 calves. During the measurement period, SF intake was 1.2kg of DM/d for LSF and 3.0kg of DM/d for HSF, and milk replacer intake averaged 2.3kg of DM/d for LSF and 1.3kg of DM/d for HSF. To estimate passage kinetics of milk replacer, concentrate, and straw, indigestible markers (CoEDTA, hexatriacontane C36, Cr-neutral detergent fiber) were supplied with the feed as a single dose 4, 24, and 48h before assessment of their quantitative recovery in the rumen, abomasum, small intestine, and large intestine. Rumen Co recovery averaged 20% of the last milk replacer meal. Recoveries of Co remained largely unaffected by SF level and R:C ratio. The R:C ratio did not affect rumen recovery of C36 or Cr. Rumen fractional passage rate of concentrate was estimated from recovery of C36 in the rumen and increased from 3.3%/h for LSF to 4.9%/h for HSF. Rumen fractional passage rate of straw was estimated from Cr recovery in the rumen and increased from 1.3%/h for LSF to 1.7%/h for HSF. An increase in SF level was accompanied by an increase in fresh and dry rumen contents. In HSF calves, pH decreased and VFA concentrations increased with increasing concentrate proportion, indicating increased fermentation. The ratio between Cr and C36 was similar in the small and large intestine, indicating that passage of concentrate and straw is mainly determined by rumen and abomasum emptying. In conclusion, increasing SF level

Differential diagnosis of pancreatic cancer from other solid tumours arising from the periampullary area on MDCT

Energy Technology Data Exchange (ETDEWEB)

Jang, Suk Ki [Bundang Jesaeng General Hospital, Departments of Radiology, Daejin Medical Center, Seognam-si, Gyeonggi-do (Korea, Republic of); Kim, Jung Hoon; Joo, Ijin; Jeon, Ju Hyun; Han, Joon Koo; Choi, Byung Ihn [Seoul National University College of Medicine, Department of Radiology and Institute of Radiation Medicine, Chongno-gu, Seoul (Korea, Republic of); Shin, Kyung Sook [Chungnam National University School of Medicine, Department of Radiology, 266 Munhwa-ro, Jung-gu, Daejeon (Korea, Republic of)

2015-10-15

To investigate CT features and differential diagnosis of pancreatic adenocarcinoma compared to other solid tumours arising in the periampullary area. One hundred and ninety-five patients with pathologically proven, solid periampullary tumours, including pancreatic adenocarcinoma (n = 98), neuroendocrine tumours (n = 52), gastrointestinal stromal tumours (n = 31), and solid pseudopapillary neoplasms (n = 14), underwent preoperative CT. Two radiologists reviewed CT features and rated the possibility of pancreatic adenocarcinoma. Statistically common findings for pancreatic adenocarcinoma included: patient age >50 years; ill-defined margin; completely solid mass; homogeneous enhancement; hypoenhancement on arterial and venous phases; atrophy; and duct dilatation. Statistically common findings for GIST included: heterogeneous enhancement; hyperenhancement on arterial and venous phases; rim enhancement; and prominent feeding arteries. The hyperenhancement on arterial and venous phases is statistically common in NET, and heterogeneous enhancement, hypoenhancement on the arterial and venous phases are statistically common in SPN. Diagnostic performance of CT for differentiating pancreatic adenocarcinomas from other solid periampullary tumours was 0.962 and 0.977 with excellent interobserver agreement (κ = 0.824). CT is useful not only for differentiating pancreatic adenocarcinoma form other solid tumours but also for differentiating between other solid tumours, including NET, SPN, and GIST, arising in the periampullary area. (orig.)

Interim report on the state-of-the-art of solid-state motor controllers. Part 4. Failure-rate and failure-mode data

International Nuclear Information System (INIS)

Jaross, R.A.

1983-09-01

An assessment of the reliability of solid-state motor controllers for nuclear power plants is made. Available data on failure-rate and failure-mode data for solid-state motor controllers based on industrial operating experience is meager; the data are augmented by data on other solid-state power electronic devices that are shown to have components similar to those found in solid-state motor controllers. In addition to large nonnuclear solid-state adjustable-speed motor drives, the reliability of nuclear plant inverter systems and high-voltage solid-state dc transmission-line converters is assessed. Licensee Event Report analyses from several sources, the open literature, and personal communications are used to determine the realiability of solid-state devices typical of those expected to be used in nuclear power plants in terms of failures per hour

Effect of solids retention time on the bioavailability of organic carbon in anaerobically digested swine waste.

Science.gov (United States)

Kinyua, Maureen N; Cunningham, Jeffrey; Ergas, Sarina J

2014-06-01

Anaerobic digestion (AD) can be used to stabilize and produce energy from livestock waste; however, digester effluents may require further treatment to remove nitrogen. This paper quantifies the effects of varying solids retention time (SRT) methane yield, volatile solids (VS) reduction and organic carbon bioavailability for denitrification during swine waste AD. Four bench-scale anaerobic digesters, with SRTs of 14, 21, 28 and 42 days, operated with swine waste feed. Effluent organic carbon bioavailability was measured using anoxic microcosms and respirometry. Excellent performance was observed for all four digesters, with >60% VS removal and CH4 yields between 0.1 and 0.3(m(3)CH4)/(kg VS added). Organic carbon in the centrate as an internal organic carbon source for denitrification supported maximum specific denitrification rates between 47 and 56(mg NO3(-)-N)/(g VSS h). The digester with the 21-day SRT had the highest CH4 yield and maximum specific denitrification rates. Copyright © 2014 Elsevier Ltd. All rights reserved.

The effects of feeding time on milk production, total-tract digestibility, and daily rhythms of feeding behavior and plasma metabolites and hormones in dairy cows.

Science.gov (United States)

Niu, M; Ying, Y; Bartell, P A; Harvatine, K J

2014-12-01

The timing of feed intake entrains circadian rhythms regulated by internal clocks in many mammals. The objective of this study was to determine if the timing of feeding entrains daily rhythms in dairy cows. Nine Holstein cows were used in a replicated 3 × 3 Latin square design with 14-d periods. An automated system recorded the timing of feed intake over the last 7 d of each period. Treatments were feeding 1×/d at 0830 h (AM) or 2030 h (PM) and feeding 2×/d in equal amounts at 0830 and 2030 h. All treatments were fed at 110% of daily intake. Cows were milked 2×/d at 0500 and 1700 h. Milk yield and composition were not changed by treatment. Daily intake did not differ, but twice-daily feeding tended to decrease total-tract digestibility of organic matter and neutral detergent fiber (NDF). A treatment by time of day interaction was observed for feeding behavior. The amount of feed consumed in the first 2h after feeding was 70% greater for PM compared with AM feeding. A low rate of intake overnight (2400 to 0500 h; 2.2 ± 0.74% daily intake/h, mean ± SD) and a moderate rate of intake in the afternoon (1200 to 1700 h; 4.8 ± 1.1% daily intake/h) was noted for all treatments, although PM slightly reduced the rate during the afternoon period compared with AM. A treatment by time of day interaction was seen for fecal NDF and indigestible NDF (iNDF) concentration, blood urea nitrogen, plasma glucose and insulin concentrations, body temperature, and lying behavior. Specifically, insulin increased and glucose decreased more after evening feeding than after morning feeding. A cosine function within a 24-h period was used to characterize daily rhythms using a random regression. Rate of feed intake during spontaneous feeding, fecal NDF and iNDF concentration, plasma glucose, insulin, NEFA, body temperature, and lying behavior fit a cosine function within a 24-h period that was modified by treatment. In conclusion, feeding time can reset the daily rhythms of feeding and

Seawater feed reverse osmosis preheating appraisal, Part I: leading element performance

International Nuclear Information System (INIS)

Karameldin, A.; Saadawy, M.S.

2006-01-01

This paper is concerned with the seawater reverse osmosis preheating process, and presents a parametric study of the process. The basic transport equations describing the leading element are exhibited and appraised. The leading element, which governs the whole system performance, is studied and analysed. The incorporated and investigated operating parameters are the feed pressure and the temperature for different feed salt concentrations. In addition, different feed flow rates, effects on permeate flux and permeator salt rejection, together with the permeator recovery, are studied. A seawater membrane of a well-known data, for instance FT30SW380HR, is used to perform the study. The membrane water permeability coefficient K w is determined and correlated. Furthermore, the membrane salt permeability coefficient K s from the manufacturer system analysis program (ROSA) is given and discussed. The transport governing equations are programmed in a way that facilitates the achievement of a realistic parametric study. The results showed that the permeate flux increases significantly as the feed pressure increases. Also, it increases significantly as the feed salt concentration decreases, and also as the feed temperature and pressure increase. Meanwhile, the permeator salt rejection increases significantly as the feed pressure increases, and decreases significantly as the feed temperature increases. The study of the leading element of the array showed that there are constraints that must be considered, such as maximum membrane flux, maximum applied feed pressure, maximum feed flow rate and maximum feed temperature. Therefore, to attain the maximum membrane flux, the applied feed pressure must be lowered when the feed temperature is increased. In the case where the feed temperature is increased from 18 deg.. C to 45 deg.. C, a pressure saving of between 7% and 26% is achieved, according to the feed salt concentration and feed flow rate. (author)

Transport of Eu3+ through a Bis(2-ethylhexyl)-phosphoric acid, n-dodecane solid supported liquid membrane

International Nuclear Information System (INIS)

Danesi, P.R.; Horwitz, E.P.; Rickert, P.

1982-01-01

The coupled transpot of Eu 3 + and H + ions througn a solid supported liquid membrane consisting of a porous polypropylene film immobilizing an HDEHP solution in n-dodecane has been studied as a function of the membrane area, stirring speed of the aqueous solutions, membrane composition, and acidity of the feed solution. The experimental results are in agreement with predictions derived from a theoretical permeability coefficient equation which assumes that membrane diffusion and aqueous film diffusion are the only rate-controlling factors

Design and development of solid carbide step drill K34 for machining of CFRP and GFRP composite laminates

Science.gov (United States)

Rangaswamy, T.; Nagaraja, R.

2018-04-01

The Study focused on design and development of solid carbide step drill K34 to drill holes on composite materials such as Carbon Fiber Reinforced Plastic (CFRP) and Glass Fiber Reinforced Plastic (GFRP). The step drill K34 replaces step wise drilling of diameter 6.5mm and 9 mm holes that reduces the setup time, cutting speed, feed rate cost, delamination and increase the production rate. Several researchers have analyzed the effect of drilling process on various fiber reinforced plastic composites by carrying out using conventional tools and machinery. However, this process operation can lead to different kind of damages such as delamination, fiber pullout, and local cracks. To avoid the problems encountered at the time of drilling, suitable tool material and geometry is essential. This paper deals with the design and development of K34 Carbide step drill used to drill holes on CFRP and GFRP laminates. An Experimental study carried out to investigate the tool geometry, feed rate and cutting speed that avoids delamination and fiber breakage.

Verde plant bug (Hemiptera: Miridae) feeding injury to cotton bolls characterized by boll age, size, and damage ratings.

Science.gov (United States)

Armstrong, J Scott; Brewer, Michael J; Parker, Roy D; Adamczyk, J J

2013-02-01

The verde plant bug, Creontiades signatus (Distant), has been present in south Texas for several years but has more recently been documented as an economic threat to cultivated cotton, (Gossypium hirsutum L. Our studies over 2 yr (2009 and 2010) and two locations (Weslaco and Corpus Christi, TX) investigated feeding-injury of the verde plant bug to a range of cotton boll age classes defined by boll diameter and accumulated degree-days (anthesis to the time of infesting) for first-position cotton bolls infested with the plant bugs. The most detrimental damage to younger cotton holls from verde plant bug feeding was boll abscission. Cotton bolls verde plant bug injured bolls compared with the controls up to 162 ACDD or a mean boll diameter 2.0 cm. Cotton seed weights were significantly reduced up to 179 ACDD or a boll diameter of 2.0 cm at Weslaco in 2009, and up to 317 ACDD or boll diameter 2.6 cm for Weslaco in 2010 when compared with the noninfested controls. Lint weight per cotton boll for infested and noninfested bolls was significantly reduced up to 262 ACDD or boll diameter 2.5 for Corpus Christi in 2010 and up to 288 ACCD or boll diameter 2.6 cm for Weslaco, TX, in 2010. Damage ratings (dependant variable) regressed against infested and noninfested seed-cotton weights showed that in every instance, the infested cotton bolls had a strong and significant relationship with damage ratings for all age classes of bolls. Damage ratings for the infested cotton bolls that did not abscise by harvest showed visual signs of verde plant bug feeding injury and the subsequent development ofboll rot; however, these two forms of injury causing lint and seed mass loss are hard to differentiate from open or boll-locked cotton bolls. Based on the results of both lint and seed loss over 2 yr and four studies cotton bolls should be protected up to approximately 300 ACDD or a boll diameter of 2.5 cm. This equilibrates to bolls that are 12-14 d of age dependent upon daily maximum

Influence of the menstrual cycle and of menopause on the gastric emptying rate of solids in female volunteers

International Nuclear Information System (INIS)

Mones, J.; Carrio, I.; Calabuig, R.; Estorch, M.; Sainz, S.; Berna, L.; Vilardell, F.

1993-01-01

The aim of this study was to assess the influence of the normal menstrual cycle and of menopause on the gastric emptying rate of solids. Gastric emptying was studied in 15 premenopausal and ten postmenopausal women with an isotopic technique after the ingestion of a radiolabelled test meal. Premenopausal women were studied twice: Within 1 week prior to menses and again 1 week after onset of menses. Postmenopausal women were studied only once. The emptying curves of the solid component of the meal fitted a linear model. The half-emptying time was 78±5 min during the follicular phase, 75±7 min during the luteal phase and 76±6 min in postmenopausal women (differences not statistically significant). The mean percentages of the meal retained in the stomach at different time intervals were also similar in the three groups. These results suggest that the menstrual cycle does not influence the gastric emptying rate of solids, which remains unchanged in relation to the follicular phase or after menopause. (orig.)

Environmental impacts of genetic improvement of growth rate and feed conversion ratio in fish farming under rearing density and nitrogen output limitations

NARCIS (Netherlands)

Besson, M.; Aubin, J.; Komen, H.; Poelman, M.; Quillet, E.; Vandeputte, M.; Arendonk, Van J.A.M.; Boer, De I.J.M.

2016-01-01

Today, fish farming faces an increasing demand in fish products, but also various environmental challenges. Genetic improvement in growth rate and feed conversion ratio is known to be an efficient way to increase production and increase efficiency in fish farming. The environmental consequences

THE INFLUENCE OF THE TOOL POINT ANGLE AND FEED RATE ON THE DYNAMIC PARAMETERS AT DRILLING COATED PARTICLEBOARD

Directory of Open Access Journals (Sweden)

Mihai ISPAS

2015-12-01

Full Text Available Pre-laminated (coated particleboards (PB are wood-based composites intensively used in the furniture industry. In order to prepare the PB for joining, drilling is the most commonly applied machining process. The surface quality and the dynamic parameters (thrust force and torque are significantly influenced by the tools characteristics and the machining parameters. The point/tip angle of the drill bit and the feed speed during drilling play a major role in gaining a good surface quality and minimizing the dynamic parameters. The objective of this study was to measure and analyze the influence of both the geometric and cinematic parameters on the dynamic parameters at drilling with twist (helical drills. The experiments were performed based on a factorial design. The results show that, a low feed rate generally minimizes both the drilling torque and the thrust force, while a small tip angle increases the drilling torque and minimizes the thrust force.

Feeding and management strategies for rural poultry production in Central Tanzania

NARCIS (Netherlands)

Goromela, E.H.

2009-01-01

Keywords: Central Tanzania, rural poultry, scavengeable feed resources, nutrient composition, crop
contents, season, farming system, chemical composition, supplementary feeding, weaning, egg production,
growth rate, survival rate, laying management, indigenous chickens

The

Radiation induced chemical changes in and disinfection of organic wastes suitable for supplemental feed

International Nuclear Information System (INIS)

Groneman, A.F.

1980-01-01

Ionizing radiation has been found to disinfect organic wastes and simultaneously ease the separation of suspended solids from water. Because these effects can have important favourable impacts on the technology of upgrading organic wastes to animal feed or fertilizers, experimental studies are reported on the rationale of effects of gamma irradiation or disinfection and separation of the solid and the liquid phase of organic waste systems. The radiation inactivation of microorganisms occurs by direct and indirect action. Mechanisms of inactivation are discussed and measures are proposed how the indirect action of the radiation inactivation of microorganisms can be increased. Effects of gamma irradiation on dewatering properties of organic wastes were indirectly caused by the oxidizing OH radicals produced by the irradiation of water. OH radicals react with organic components of the solid phase which leads to their solubilisation resulting in an increase of the total organic carbon concentration in the liquid phase. Results of a mutagenicity test indicate that the solvated compounds exhibited no mutagenic activity. Microbiological case studies on the disinfection and upgrading of liquid and solid organic wastes to animal feed are discussed and the acceptance of radiation processing is evaluated. (Auth.)

Distribution patterns and feeding success of anchovy, Engraulis anchoita, larvae off southern Brazil

Directory of Open Access Journals (Sweden)

Marcelo Cunha Vasconcellos

1998-12-01

Full Text Available Feeding success and changes in horizontal patchiness relative to size were studied for anchovy, Engraulis anchoita, larvae caught with a Bongo net off southern Brazil. Results show higher feeding success rates during winter, when the combined effect of enrichment, stability and retention mechanisms seems to create optimal conditions for larval feeding. Under optimal feeding conditions larvae of more than 10 mm have higher feeding success rates than smaller size classes. With a simple body structure and low swimming capabilities, larvae of up to 10 mm show a low level of patchiness, low evasion rate of the sampling gear and feeding on small food particles only. Results corroborate the hypothesis of a critical period between two important ontogenic phases: the beginning of exogenous feeding and the onset of active swimming, gas gland buoyancy and school forming behavior.

Hydrodynamics of microbial filter feeding.

Science.gov (United States)

Nielsen, Lasse Tor; Asadzadeh, Seyed Saeed; Dölger, Julia; Walther, Jens H; Kiørboe, Thomas; Andersen, Anders

2017-08-29

Microbial filter feeders are an important group of grazers, significant to the microbial loop, aquatic food webs, and biogeochemical cycling. Our understanding of microbial filter feeding is poor, and, importantly, it is unknown what force microbial filter feeders must generate to process adequate amounts of water. Also, the trade-off in the filter spacing remains unexplored, despite its simple formulation: A filter too coarse will allow suitably sized prey to pass unintercepted, whereas a filter too fine will cause strong flow resistance. We quantify the feeding flow of the filter-feeding choanoflagellate Diaphanoeca grandis using particle tracking, and demonstrate that the current understanding of microbial filter feeding is inconsistent with computational fluid dynamics (CFD) and analytical estimates. Both approaches underestimate observed filtration rates by more than an order of magnitude; the beating flagellum is simply unable to draw enough water through the fine filter. We find similar discrepancies for other choanoflagellate species, highlighting an apparent paradox. Our observations motivate us to suggest a radically different filtration mechanism that requires a flagellar vane (sheet), something notoriously difficult to visualize but sporadically observed in the related choanocytes (sponges). A CFD model with a flagellar vane correctly predicts the filtration rate of D. grandis , and using a simple model we can account for the filtration rates of other microbial filter feeders. We finally predict how optimum filter mesh size increases with cell size in microbial filter feeders, a prediction that accords very well with observations. We expect our results to be of significance for small-scale biophysics and trait-based ecological modeling.

Aflatoxin B1, zearalenone and deoxynivalenol in feed ingredients and complete feed from different Province in China

Directory of Open Access Journals (Sweden)

Li Wu

2016-10-01

Full Text Available Abstract Background The current study was carried out to provide a reference for monitory of aflatoxin B1 (AFB1, zearalenone (ZEN and deoxynivalenol (DON contamination in feed ingredients and complete feeds were collected from different Province in China from 2013 to 2015. Methods A total of 443 feed ingredients, including 220 corn, 24 wheat, 24 domestic distillers dried grains with soluble (DDGS, 55 bran, 20 wheat shorts and red dog, 37 imported DDGS, 34 corn germ meal and 29 soybean meal as well as 127 complete feeds including 25 pig complete feed (powder, 90 pig complete feed (pellet, six duck complete feed and six cattle complete feed were randomly collected from different Province in China, respectively, by high-performance chromatography in combined with UV or fluorescence analysis. Results The incidence rates of AFB1, ZEN and DON contamination of feed ingredients and complete feeds were 80.8, 92.3 and 93.9 %, respectively. The percentage of positive samples for DON ranged from 66.7 to 100 %. Domestic DDGS and imported DDGS presented the most serious contamination AFB1, ZEN and DON contamination levels of feeds ranged from 61.5 to 100 %, indicated that serious contamination over the studied 3-year period. Conclusion The current data provide clear evidence that AFB1, ZEN and DON contamination of feed ingredients and complete feeds in different Province in China is serious and differs over past 3-year. The use of corn, domestic DDGS, imported DDGS and corn germ meal, which may be contaminated with these three mycotoxins, as animal feed may triggered a health risk for animal. Feeds are most contaminated with DON followed by ZEN and AFB1. Mycotoxins contamination in feed ingredients and complete feeds should be monitored routinely in China.

Perceiving the algae: How feeding-current feeding copepods detect their nonmotile prey

DEFF Research Database (Denmark)

Goncalves, Rodrigo J.; Kiørboe, Thomas

2015-01-01

demonstrate that (1) long-range chemical detection is incompatible with known algal leakage rates and reasonable assumptions of sensitivity, (2) that near-field chemical detection is constrained by diffusion across the boundary layer of the sensor and takes longer than observed near-contact times, and (3......Feeding-current feeding copepods detect and capture prey individually, but the mechanism by which nonmotile prey is detected has been unclear. Early reports that copepods detect phytoplankton prey at distances of one body length or more led to the hypothesis that solutes leaking from the prey would......) that most reported detection distances are well predicted by models of fluid mechanical signal generation and detection. We conclude that near-field mechanoreception is the common prey detection mode in pelagic copepods. Prey detection distances are thus governed mainly by the reach of the feeding...

Physiological Responses, Growth Rate and Blood Metabolites Under Feed Restriction and Thermal Exposure in Kids

Directory of Open Access Journals (Sweden)

O.K. Hooda

2014-05-01

Full Text Available The study was carried out to study the cumulative effect of thermal stress and feed restriction in kids. Twelve kids of Alpine x Beetle cross were divided into two groups. Group 1 served as control and group 2 was put on restricted feeding and exposed at 40, 42 and 44oC. Body weights of both groups were similar before thermal exposure and feed restriction. Body weight of group 1 increased significantly and were higher than group 2 throughout the experiment. Body weight gain, average daily gain and feed conversion efficiency were comparable in both groups after removal of thermal stress and switching over to ad libitum feeding (42-63 days. Body weights of group 2 remained lower than group 1, the losses in body weights of group 2 could not be compensated and there was approximately 25% loss in body weight at the end of experiment. Physiological responses of group 2 were significantly lower before exposure to high temperature but increased significantly after exposure at temperature 40, 42 and 44oC and the increase was in commensurate with the increase in exposure temperature. Blood glucose, total protein, albumin and serum enzymes decreased significantly on exposure at higher temperature and differences were higher in feed restricted group. T3, T4 and cortisol concentration were similar in both groups before feed restriction and thermal stress. T3, T4 concentration decreased while cortisol concentration increased significantly after exposure to high temperature. Variations in plasma enzymes, acid phosphatase, alkaline phosphatase, SGOT and SGPT were not significant before feed restriction and thermal stress. The activities of acid phosphatase and alkaline phosphatase decreased whereas that of SGOT and SGPT increased significantly on exposure at temperature 40oC and subsequent changes at temperature 42 and 44oC were not significant. The study indicated that animals of group 2 experienced more stress as observed by significant alteration in body

Generation of Domestic Solid Waste in Tikrit City and The Effects of Family Size and Incomes Level on the Rate of Generation

Directory of Open Access Journals (Sweden)

Waleed M. Al Abed Raba

2013-04-01

Full Text Available     This research included collection and analysis of (2800 samples from four different neighborhoods in Tikrit over the seasons of the year to cover seasonal changes in the generation rate of domestic solid waste. The generation rate of domestic solid waste is (0.460 kg / person / day. The results also showed that summer season is the most season that produced solid waste (0.487 kg / person / day. While winter is the lowest season (0.422 kg / person / day. The results indicated that Friday and Saturday are the most producing days (0.629 , 0.557 kg / person / days, respectively. The results showed the impact of rural character of Aalam region in reducing the rate of generation of domestic solid waste as the rate of generation of the neighborhoods of the four studied areas was (0.460 kg / person / day. SPSS program using has been adopted as a method of statistical analysis to study the effect of family size and income level have on the generation rate in the city, where the results showed that family size adversely affects the generation rate of solid waste, also the lowest generation rate was recorded for families with high income level.                                                                                                                                  

Influence of limit-feeding and time of day of feed availability to growing calves on growth performance and feeding behavior in cold weather.

Science.gov (United States)

Prezotto, L D; Gilbery, T C; Bauer, M L; Islas, A; Swanson, K C

2017-11-01

Objective swere to determine the effects of limit-feeding and time of feed access in cold weather on growth performance and feeding behavior of growing calves fed a corn silage-based diet. Sixty-six steers (BW = 317 ± 5.3 kg) and 30 heifers (BW = 239 ± 7.6 kg) were assigned randomly to dietary treatment: 1) ad libitum feed intake (AL), 2) limit-fed to 80% of the average DMI of the AL group on a BW basis in the daytime (0601-1759 h; LF-D), 3) limit-fed to 80% of the average DMI of the AL group on a BW basis in the nighttime (1800-0559 h; LF-N), and 4) limit-fed to 80% of the average DMI of the AL group on a BW basis, split 1/2 in the daytime and 1/2 in the nighttime (LF-S). Feed intake and feeding behavior were monitored over 84 d using the Insentec feeding system. Average daily gain, DMI, and G:F were greater ( ≤ 0.002) in the AL group compared with others. Dry matter intake was not different ( = 0.17) when comparing the LF-D with the LF-N groups. Average daily gain and G:F were greater ( ≤ 0.05) when comparing the LF-N group to the LF-D group, and were not different ( ≥ 0.51) when comparing the LF-S group with the mean of the LF-D and LF-N groups. Number of visits and meals per d was greater ( ≤ 0.001) in the LF-N than the LF-D group. Feed intake per visit was not different ( = 0.55) when comparing the AL group and others, and tended to be greater ( = 0.06) in the LF-D than the LF-N group. Feed intake per meal was greater ( Feed intake per minute (eating rate) was not influenced by treatment. In conclusion, limit-feeding at 80% of ad libitum intake decreased ADG and G:F. Limit-feeding in the nighttime as compared to limit-feeding in the daytime improves growth performance and increases feeding activity (number of visits and meals per d) which could be because of increased heat production to help maintain body temperature and thus reduce maintenance energy requirements.

Study of pneumatic hydropulse filter for feed clarification in reprocessing plant head-end

International Nuclear Information System (INIS)

Siddiqui, I.A.; Shah, B.V.; Salunke, S.U.; Kumar, S.V.

1991-01-01

A Pneumatic Hydropulse (PHP) Filter with sintered stainless steel cartridges was tested for suitability in reprocessing plant head-end filtration. The filter was tested with simulated slurry containing between 25 and 400 ppm of calcium carbonate particulates in the size ranges 45 to 53 micron and 53 to 75 micron at varying flow rates. Procedures were developed for dislodging the layer of solids on the cartidridges and regenerating the filter remotely. Application of 5.4 kg/cm 2 air to the dome of the filter during regenaration was found to be optimum for dislodging the particulate layer on the cartridges. No difficulties due to choking of the filter cartridges were experienced during operation and good regeneration by remote operation was possible. Approach velocity at the filter medium was about 6 cm/min. The efficiency of regeneration was better than 90%. Filtration efficiency was found to be better than 90%. Solid loading capacity was found to increase with increase of particle size and feed concentration. (author). 2 figs., 10 tabs

99mTc-tagged chicken liver as a marker of solid food in the human stomach.

Science.gov (United States)

Meyer, J H; MacGregor, I L; Gueller, R; Martin, P; Cavalieri, R

1976-04-01

Past measurement of gastric emptying of solid food in man has depended on external counting of surface-absorbed isotopes without verification that isotopic labels remain attached to solid food in the stomach. In this study chicken liver was isotopically labeled with 99mTc incorporated uniformly and intracellularly throughout the liver substance. In vitro studies showed less than 10% loss of 99mTc from liver incubated with pepsin HC1. By contrast, up to 90% of 51Cr absorbed to scrambled eggs became detached under similar conditions. In feeding experiments less than 10% of 99mTc was liberated from fed 99mTc liver, while significantly more 51Cr became detached from egg under identical intragastric conditions. We conclude that 99mTc-tagged chicken liver is an adequate marker of the rate of emptying of solid food and appears to be more reliable than 51Cr-labeled scrambled eggs from which 51Cr dissociates in the stomach.

A new approach to feed evaluation for ruminants

DEFF Research Database (Denmark)

Kristensen, Verner Friis; Weisbjerg, Martin Riis

1991-01-01

Existing feed evaluation systems are based on empirical relationships and static models. However, digestion and metabolism are dynamic processes. Feed efficiency and product composition varies in relation to changes in feeding level and composition of the diet. Therefore, future feed formulation...... systems should be based on mechanistic and dynamic models that are descriptive of ruminant nutritional physiology. A model for calculating "truly" digested energy is proposed. This is a simplified model based on the assumptions of first-order kinetics (fractional rate constants and steady state conditions...

TENDENCIES AND PECULIARITIES OF SHRIMP FEED PRODUCTION

Directory of Open Access Journals (Sweden)

LIUDMYLA V. FIHURSKA

2018-04-01

Full Text Available Aquaculture is food sector, which is growing rapidly in the last 25 years with annual growth rate 8,2 . One of the mostperspective branches of aquaculture is shrimp farming. The cost of feeds is up to 80% of the cost of shrimp breeding, so providingthe industry with high-quality feeds is the important goal of the feed industry in all over the world. The theoretical research was devotedto the task of compound shrimp feed production. In order to satisfy shrimp requirements, shrimp feeding systems were shown.Existing shrimp breeding systems are shown as different from the type of reservoirs (static / running water, indoor or outdoor, feedingmethods, and the species of grown shrimp. Features of the nutritional standards for freshwater and saltwater shrimps were analyzed.Nutrient requirements of shrimp have been changed through shrimp life-cycle. The shrimp life-cycle was shown.World leaders-producers of compound mixed feeds for shrimps were shown. The analysis of pellet size and nutritional valueof compound mixed feeds of crude protein content in prestart, starter, grower and finish periods of cultivation and in accordancewith the system of cultivation and feeding shrimp (intensive, extensive, semi-intensive is carried out. The requirements for the contentof main minerals, vitamins and restrictions to the content of crude fiber are given. Traditional ingredients are described. Bindersand preservatives, which are used for shrimp feeds, are shown and subscribed. In raw material the main problem is the need to ensurehigh protein content in the shrimp feed recipes. Because of many factors, fish meal quantity should be reduced in recipes. Becauseof its attractive amino acid content, availability and relatively affordable price, soybean meal and soy concentrates have receivedincreasing attention as substitutes for marine animal meals.The features of technological lines and processes of production of mixed feeds for shrimp are shown.Еhe advantages and

Representative sampling of animal feed and mixtures in the Danish agricultural sector

DEFF Research Database (Denmark)

Petersen, Lars; Esbensen, Kim Harry

2005-01-01

Sampling of grain, animal feeds (solid & liquid) including important mineral mixtures in the Danish agricultural sector is subject to an ongoing investigation with the objective of improving existing (sub-optimal) sampling procedures. Results from the first 6 months are presented here; the projec...

The feeding tube of cyst nematodes: characterisation of protein exclusion.

Directory of Open Access Journals (Sweden)

Sebastian Eves-van den Akker

Full Text Available Plant parasitic nematodes comprise several groups; the most economically damaging of these are the sedentary endoparasites. Sedentary endoparasitic nematodes are obligate biotrophs and modify host root tissue, using a suite of effector proteins, to create a feeding site that is their sole source of nutrition. They feed by withdrawing host cell assimilate from the feeding site though a structure known as the feeding tube. The function, composition and molecular characteristics of feeding tubes are poorly characterised. It is hypothesised that the feeding tube facilitates uptake of host cell assimilate by acting as a molecular sieve. Several studies, using molecular mass as the sole indicator of protein size, have given contradictory results about the exclusion limits of the cyst nematode feeding tube. In this study we propose a method to predict protein size, based on protein database coordinates in silico. We tested the validity of these predictions using travelling wave ion mobility spectrometry--mass spectrometry, where predictions and measured values were within approximately 6%. We used the predictions, coupled with mass spectrometry, analytical ultracentrifugation and protein electrophoresis, to resolve previous conflicts and define the exclusion characteristics of the cyst nematode feeding tube. Heterogeneity was tested in the liquid, solid and gas phase to provide a comprehensive evaluation of three proteins of particular interest to feeding tube size exclusion, GFP, mRFP and Dual PI. The data and procedures described here could be applied to the design of plant expressed defence compounds intended for uptake into cyst nematodes. We also highlight the need to assess protein heterogeneity when creating novel fusion proteins.

The feeding tube of cyst nematodes: characterisation of protein exclusion.

Science.gov (United States)

Eves-van den Akker, Sebastian; Lilley, Catherine J; Ault, James R; Ashcroft, Alison E; Jones, John T; Urwin, Peter E

2014-01-01

Plant parasitic nematodes comprise several groups; the most economically damaging of these are the sedentary endoparasites. Sedentary endoparasitic nematodes are obligate biotrophs and modify host root tissue, using a suite of effector proteins, to create a feeding site that is their sole source of nutrition. They feed by withdrawing host cell assimilate from the feeding site though a structure known as the feeding tube. The function, composition and molecular characteristics of feeding tubes are poorly characterised. It is hypothesised that the feeding tube facilitates uptake of host cell assimilate by acting as a molecular sieve. Several studies, using molecular mass as the sole indicator of protein size, have given contradictory results about the exclusion limits of the cyst nematode feeding tube. In this study we propose a method to predict protein size, based on protein database coordinates in silico. We tested the validity of these predictions using travelling wave ion mobility spectrometry--mass spectrometry, where predictions and measured values were within approximately 6%. We used the predictions, coupled with mass spectrometry, analytical ultracentrifugation and protein electrophoresis, to resolve previous conflicts and define the exclusion characteristics of the cyst nematode feeding tube. Heterogeneity was tested in the liquid, solid and gas phase to provide a comprehensive evaluation of three proteins of particular interest to feeding tube size exclusion, GFP, mRFP and Dual PI. The data and procedures described here could be applied to the design of plant expressed defence compounds intended for uptake into cyst nematodes. We also highlight the need to assess protein heterogeneity when creating novel fusion proteins.

Nutrition, feeding, and behavior of fish.

Science.gov (United States)

Lall, Santosh P; Tibbetts, Sean M

2009-05-01

Nutrition and feeding influence growth, reproduction, and health of fish and their response to physiologic and environmental stressors and pathogens. The basics of fish metabolism are similar to those of warm-blooded animals in that they involve food intake, digestion, absorption, and transport of nutrients to the various tissues. Fish, however, being the most primitive form of vertebrates, possess some distinguishing features which will be discussed. Unlike warm-blooded animals, which are homoeothermic, fish are poikilothermic, so their body temperature and metabolic rate depends on the water temperature and this has practical implications for the nutrition, feeding and health of fish. Several behavioral responses have been linked to methods of feeding, feeding habits, frequency of feeding, mechanisms of food detection, and food preferences. Fish are also unique among vertebrates in their ability to absorb minerals not only from their diets but also from water through their gills and skin.

Ventilation rate in equilibrium factor measurements with solid state nuclear track detectors (SSNTD)

International Nuclear Information System (INIS)

Gil, L.R.; Leitao, R.M.S.; Marques, A.; Rivera, A.

1994-08-01

Ventilation rate values are calculated from track density measurements in solid state nuclear track detectors (SSNTD), both when ventilation is the main cause of radioactive disequilibrium in radon progeny and when it shares importance with other agents. The method consists in exposing a SSNTD of high intrinsic efficiency (CR-39) in filtered and unfiltered conditions and, in addition, covered with a thin Aluminium foil, to stop alpha particles from 218 Po and 222 Rn. No calibrations are required but, when necessary, independent measurements of the loss rates of radioactivity to aerosol and to walls have to perform. Ventilation rates depend upon geometry detection efficiencies for alpha particles, here obtained by Monte Carlo simulation, taking into account the space distribution of emission positions. This may lead to sizeable corrections in ventilation and equilibrium factor values. Since geometric detection efficiencies depend upon alpha-particle ranges in air, the influences of barometric variables are also discussed. (author). 7 refs

Capacity of milk composition to identify the feeding system used to feed dairy cows.

Science.gov (United States)

Vicente, Fernando; Santiago, Carme; Jiménez-Calderón, José D; Martínez-Fernández, Adela

2017-08-01

This Research Paper addresses the hypothesis that is possible to identify the type of feed used for dairy cows by means of the analysis of milk composition and the fatty acid profile of milk fat. Sixteen dairy farms were monitored during 1 year with quarterly visits between summer 2014 and spring 2015. Rations varied throughout the year due to annual dynamic change of forage production, forage rotation, variation of nutrient requirements according to physiological state of the animal, etc. The ingredients of the rations were analysed by cluster identifying five feeding systems based on the main ingredient of the diet: grazing, maize silage, grass silage, dry forage and concentrate. Milk composition could explain up to 91·3% of the total variability among feeding systems, while fatty acid profile could explain only up to 61·2% of total variability. However, when the sum of types of fatty acids and their ratios are taken, up to 93·5% of total variability could be explained. The maize silage system had the greatest milk yield, protein, solid non-fat and urea proportions, as well as the highest proportion of saturated fatty acid and lowest concentration of trans11 18 : 1, cis9 18 : 1 and 18 : 3 n3. Principal component analysis distinguishes the maize silage system from other feeding systems, both from milk composition and milk fatty acid profile. Concentrate system overlapped partially with the grazing, grass silage and dry forage systems. The latter systems had the highest concentrations of cis9 18 : 1, trans11 18 : 1 and 18 : 3, but there was no clear differentiation among them.

Effects of increasing dietary protein levels on growth, feed utilization ...

African Journals Online (AJOL)

Yomi

2012-01-05

Jan 5, 2012 ... The effect of different dietary protein levels on growth performance and on feed utilization of catfish. (Heterobranchus ... (Legendre, 1991) because of its taste, fast growth rate ..... diet containing 40% protein had high growth with low food intake and feed ... protein rate (45%) combined with a bad utilization of.

Benchmarking of DFLAW Solid Secondary Wastes and Processes with UK/Europe Counterparts

Energy Technology Data Exchange (ETDEWEB)

Brown, Elvie E. [Hanford Site (HNF), Richland, WA (United States); Swanberg, David J. [Hanford Site (HNF), Richland, WA (United States); Surman, J. [Hanford Site (HNF), Richland, WA (United States); Kay, R. [Hanford Site (HNF), Richland, WA (United States); Williams, K. [Hanford Site (HNF), Richland, WA (United States)

2017-05-08

This report provides information and background on UK solid wastes and waste processes that are similar to those which will be generated by the Direct-Feed Low Activity Waste (DFLAW) facilities at Hanford. The aim is to further improve the design case for stabilizing and immobilizing of solid secondary wastes, establish international benchmarking and review possibilities for innovation.

Associations between infant feeding practices and length, weight, and disease in developing countries

Directory of Open Access Journals (Sweden)

Benjamin eYarnoff

2013-09-01

Full Text Available The health benefits of exclusive breastfeeding are well known, but the relative detrimental impacts of other foods on infant health are unknown. Because infants in developing countries are fed a wide range of food, quantifying the burden of these diverse feeding practices on infant health is essential for public health policy. We used data from the Demographic Health Survey from 20 developing countries over multiple years to examine the independent association of six different types of food (exclusive breastfeeding, nonexclusive breastfeeding, infant formula, milk liquids, non-milk liquids, and solid foods with five measures of infant health (length, weight, diarrhea, fever, and cough. We estimated associations with regression analysis, controlling for confounding factors with infant, mother, and household factors and community-year fixed effects. We used these estimates in a simulation model to quantify the burden of different combinations of food on infant health. We show that for an infant younger than 6 months old, following current guidelines and exclusively breastfeeding instead of giving the infant solid foods may increase length by 0.75 centimeters and weight by 0.25 kilograms and decrease diarrhea, fever, and cough prevalence by 8%, 12%, and 11%, respectively. We found that the burden on infant health of some feeding practices is less than others. Although all other feeding practices are associated with worse health outcomes than exclusive breastfeeding, breastfeeding supplemented with liquids has a lower burden on infant health than solid foods and infant formula has a lower burden than milk or nonmilk liquids as measured by four of five health metrics. Providing specific quantified burden estimates of these practices can help inform public health policy related to infant feeding practices.

Radiation pasteurization of mink feed; Effect of irradiated feed on reproductive performance, growth and fur quality of mink

Energy Technology Data Exchange (ETDEWEB)

Passey, C A; Roy, D; Savoie, L [St. Hyacinthe Food Research Centre, Agriculture (Canada); Malo, R [AgriZo Vet Consultants, St. Hyacinthe, QA (Canada); Wilson, J [J.J. Wilson et Fils, Inc., St. Hyacinthe, QA (Canada)

1990-01-01

No significant differences were observed in the net birth rate of mink kits/female between the 7 breeding groups. However, there was reduced incidence (P=0.05) of kit deaths among the females receiving irradiated feed, and larger kit size (P<0.0001) at birth particularly for the litter size of 5-8 kits. The second generation minks born to parents receiving feed irradiated to a planned dose of 1 kGy weighed on average about 2.5% more, and their fur was on average about 1{plus minus}0.26 cm longer (12% more males making the top length grade). Moreover, there was no effect of irradiated feed on fur quality. Irradiation of mink feed with subsequent frozen storage of the meat component improved the microbiological quality by decreasing the incidence of Pseudomonas sp. and Salmonella sp. Radiation pasteurization of mink feed (frozen meat to 1 kGy, and dry feed to 2 kGy or more) should therefore help improve feed utilization, keep animals healthier, and reproducing better without affecting fur quality. (author).

Aquaponics: integrating fish feeding rates and ion waste production for strawberry hydroponics

International Nuclear Information System (INIS)

Villarroel, M.; Alvarino, J. M. R.; Duran, J. M.

2011-01-01

Aquaponics is the science of integrating intensive fish aquaculture with plant production in recirculating water systems. Although ion waste production by f ish cannot satisfy all plant requirements, less is known about the relationship between total feed provided for f ish and the production of milliequivalents (mEq) of different macronutrients for plants, especially for nutrient flow hydroponics used for strawberry production in Spain. That knowledge is essential to consider the amount of macronutrients available in aquaculture systems so that farmers can estimate how much nutrient needs to be supplemented in the waste water from fish, to produce viable plant growth. In the present experiment, tilapia (Oreochromis niloticus L.) were grown in a small-scale recirculating system at two different densities while growth and feed consumption were noted every week for five weeks. At the same time points, water samples were taken to measure pH, EC 2 5, HCO3 - , Cl - , NH + 4 , NO 2 - , NO 3 - , H 2 PO 4 - , SO 4 2 -, Na + , K + , Ca 2 + and Mg 2 + build up. The total increase in mEq of each ion per kg of feed provided to the fish was highest for NO 3 - , followed, in decreasing order, by Ca 2 +, H 2 PO 4 - , K + , Mg 2 + and SO 4 2 -. The total amount of feed required per mEq ranged from 1.61- 13.1 kg for the four most abundant ions (NO 3 - , Ca 2 +, H 2 PO 4 - and K + ) at a density of 2 kg fish m3, suggesting that it would be rather easy to maintain small populations of fish to reduce the cost of hydroponic solution supplementation for strawberries. (Author) 16 refs.

Relative feeding rates on free and particle-bound bacteria by freshwater macrozooplankton

International Nuclear Information System (INIS)

Schoenberg, S.A.; Maccubbin, A.E.

1985-01-01

Feeding suspensions of equivalent particle spectra were assembled with either free-living ( 3 H]thymidine. Clearance (ml ind -1 d -1 ) of attached bacteria was 3-29 x that of free bacteria for the cladocerans Acantholeberis, Chydorus, and Eubosmina. Pseudosida and Ceriodaphnia showed weaker discrimination or no selection, indicating a lower size threshold for filtration in these species. Feeding suspensions composed of isolated free bacteria yielded significantly higher or lower estimates of grazing than free bacteria with the full complement of particles, depending on species. Relative clearance (attached:free) tended to increase with body size within a species and varied for different particle environments. Bacteria associated with large particles may increase detrital energy flow to consumers in eutrophic environments

Contaminated and uncontaminated feeding influence perceived intimacy in mixed-sex dyads.

Science.gov (United States)

Alley, Thomas R

2012-06-01

It was expected that viewers watching adult mixed-sex pairs dining together will give higher ratings of the perceived intimacy and involvement of the pair if feeding is displayed while eating, especially if the feeding involves contaminated (i.e., with potential germ transfer) foods. Our hypotheses were tested using a design in which participants viewed five videotapes in varying order. Each video showed different mixed-sex pairs of actors sharing meal and included a distinct form of food sharing or none. These were shown to 50 small groups of young adults in quasi-random sequences to control for order effects. Immediately after each video, viewers were asked about the attractiveness, attraction and intimacy in the dyad they had just observed. As predicted, videos featuring contaminated feeding consistently produced higher ratings on involvement and attraction than those showing uncontaminated feeding which, in turn, mostly produced higher ratings on involvement and attraction than those showing no feeding behaviors. Copyright © 2012 Elsevier Ltd. All rights reserved.

Qualitative versus quantitative feed restriction in Pekin breeder ...

African Journals Online (AJOL)

titative (60% of a group fed ad lib) feed restriction during the rearing period with a ... restriction to reduce growth rate and delay sexual maturity. Since the amount of .... ing in the cost of feed when compared to the more expensive ad lib diet.

Social theory and infant feeding

Science.gov (United States)

2011-01-01

Clinicians, public health advisors, nutritionists and others have been attempting to increase breastfeeding rates for the last few decades, with varying degrees of success. We need social science researchers to help us understand the role of infant feeding in the family. Some researchers in the area of food and nutrition have found Pierre Bourdieu's theoretical framework helpful. In this editorial, I introduce some of Bourdieu's ideas and suggest researchers interested in infant feeding should consider testing these theories. PMID:21676218

Effect of gestating sow body condition, feed refusals, and group housing on growth and feed intake in grower-finishing pigs

NARCIS (Netherlands)

Sell-Kubiak, E.B.; Waaij, van der E.H.; Bijma, P.

2013-01-01

The main focus of this study was to identify sow gestation features that affect growth rate (GR) and feed intake (FI) of their offspring during grower–finishing stage. Because the sow provides a specific environment to her offspring during gestation, certain features (e.g., BW of the sow), feed

Salmonella Radicidation of Dry Mixed Feeds and Feed Ingredients

Energy Technology Data Exchange (ETDEWEB)

Mossel, D. A.A. [Central Institute for Nutrition and Food Research TNO, Zeist (Netherlands); San Marcos University, Lima (Peru)

1967-11-15

Feed components contaminated with salmonellae act as vehicles in the transmission of these bacteria to slaughter animals and hence to meat and poultry. Terminal decontamination of ingredients or mixed feed seems required because sanitary improvements in processing, bagging and storage do not always appear effective in considerably reducing salmonella contamination rates. Experiments were carried out to assay the decontamination effect of pelletization of mixed feed. Enumeration of enterobacteriaceae was used as the analytical criterion. It appeared that a temperature over 80 Degree-Sign C generally led to five decimal reductions in enterobacteriaceae counts; however, also currently used lower temperatures may bring about two decimal reductions only. Following earlier experiments with fish meal, range finding tests on the decontamination of mixed feed with {sup 60}Co gamma rays were also performed. To achieve five decimal reductions in the counts of the most resistant enterobacteriaceae which were encountered about 0.5 Mrad was required; survival curves were generally not linear, so that overall effective dose had to be used as a parameter. Feeding experiments with rats, using 35% fish meal irradiated at 0.8 Mrad in the diet for two years, demonstrated that neither losses of nutritive value nor the occurrence of orally toxic factors is effected by such an irradiation treatment. It is recommended that pilot plant tests be carried out. In these tests an attempt should be made to combine improved sanitation and pelletizing with a terminal radiation treatment of the bagged material with the lowest dose required. Such tests should preferably be carried out in suitable areas of countries like Peru or Chile. A brief outline is given of the development work and training of scientific and technical staff that should be carried out during the installation of such a pilot plant. (author)

Analysis of the Tank 5F Feed and Bleed Residual Solids

Energy Technology Data Exchange (ETDEWEB)

Poirier, M.; Diprete, D.: Coleman, C.; Washington, A.

2011-07-07

Savannah River Remediation (SRR) is preparing Tank 5F for closure. As part of Tank 5F Closure Mechanical Cleaning, SRR conducted a 'Feed and Bleed' process in Tank 5F. Following this 'Feed and Bleed' Mechanical Cleaning in Tank 5F, SRR collected two tank heel samples (referred to as sample 1 and sample 2) under Riser 5 to determine the composition of the material remaining in the tanks. This document describes sample analysis results. The conclusions from this analysis follow. (1) The anions measured all had a concentration less than 250 mg/kg, except for oxalate, which had a concentration of 2100-2400 mg/kg. (2) The measured cations with the highest concentration were iron (432,000-519,000 mg/kg), nickel (54,600-69,300 mg/kg), and manganese (35,200-42,100 mg/kg). All other cations measured less than 13,000 mg/kg. (3) The radionuclides present in the highest concentration are {sup 90}Sr (3.0 x 10{sup 10} dpm/g), {sup 137}Cs (6.8 x 10{sup 8} dpm/g), and {sup 241}Am (1.4 x 10{sup 8} - 1.8 x 10{sup 8} dpm/g). (4) The particle size analysis shows a large fraction of particles greater than 100 {micro}.

Protein enrichment, cellulase production and in vitro digestion improvement of pangolagrass with solid state fermentation.

Science.gov (United States)

Hu, Chan-Chin; Liu, Li-Yun; Yang, Shang-Shyng

2012-02-01

Pangolagrass, Digitaria decumbens Stent, is a major grass for cow feeding, and may be a good substrate for protein enrichment. To improve the quality of pangolagrass for animal feeding, cellulolytic microbes were isolated from various sources and cultivated with solid state fermentation to enhance the protein content, cellulase production and in vitro digestion. The microbes, culture conditions and culture media were studied. Cellulolytic microbes were isolated from pangolagrass and its extracts, and composts. Pangolagrass supplemented with nitrogen and minerals was used to cultivate the cellulolytic microbes with solid state fermentation. The optimal conditions for protein enrichment and cellulase activity were pangolagrass substrate at initial moisture 65-70%, initial pH 6.0-8.0, supplementation with 2.5% (NH(4))(2)SO(4), 2.5% KH(2)PO(4) and K(2)HPO(4) mixture (2:1, w/w) and 0.3% MgSO(4).7H(2)O and cultivated at 30(o)C for 6 days. The protein content of fermented pangolagrass increased from 5.97-6.28% to 7.09-16.96% and the in vitro digestion improved from 4.11-4.38% to 6.08-19.89% with the inoculation of cellulolytic microbes by solid state fermentation. Each 1 g of dried substrate yielded Avicelase 0.93-3.76 U, carboxymethylcellulase 1.39-4.98 U and β-glucosidase 1.20-6.01 U. The isolate Myceliophthora lutea CL3 was the strain found to be the best at improving the quality of pangolagrass for animal feeding with solid state fermentation. Solid state fermentation of pangolagrass inoculated with appropriate microbes is a feasible process to enrich protein content, increase in vitro digestibility and improve the quality for animal feeding. Copyright © 2011. Published by Elsevier B.V.

Effect of solid-meal caloric content on gastric emptying kinetics of solids and liquids.

Science.gov (United States)

Urbain, J L; Siegel, J A; Mortelmans, L; van Cutsem, E; van den Maegdenbergh, V; de Roo, M

1989-08-01

In this study, we have evaluated the effect of the caloric content of a physiological test meal on the gastric emptying kinetics of solids and liquids. 22 healthy male volunteers were studied in two groups matched for age. After an overnight fast, each volunteer underwent the same test procedure; in the first group (G I), 10 volunteers received a meal consisting of bread, 111In-DTPA water and 1 scrambled egg labeled with 99mTc-labelled sulphur colloid; in the second group (G II) 12 volunteers were given the same meal but with 2 labeled eggs in order to increase the caloric content of the solid phase meal. Simultaneous anterior and posterior images were recorded using a dual-headed gamma camera. Solid and liquid geometric mean data were analyzed to determine the lag phase, the emptying rate and the half-emptying time for both solids and liquids. Solid and liquid gastric half-emptying times were significantly prolonged in G II compared to G I volunteers. For the solid phased, the delay was accounted for by a longer lag phase and a decrease in the equilibrium emptying rate. The emptying rate of the liquid phase was significantly decreased in G II compared to G I. Within each group, no statistically significant difference was observed between solid and liquid emptying rates. We conclude that the caloric content of the solid portion of a meal not only alters the emptying of the solid phase but also affects the emptying of the liquid component of the meal.

Effect of solid-meal caloric content on gastric emptying kinetics of solids and liquids

International Nuclear Information System (INIS)

Urbain, J.L.; Mortelmans, L.; Cutsem, E. van; Maegdenbergh, V. van den; Roo, M. de

1989-01-01

In this study, we have evaluated the effect of the caloric content of a physiological test meal on the gastric emptying kinetics of solids and liquids. 22 healthy male volunteers were studied in two groups matched for age. After an overnight fast, each volunteer underwent the same test procedure; in the first group (G I), 10 volunteers received a meal consisting of bread, 111 In-DTPA water and 1 scrambled egg labeled with 99m Tc-labelled sulphur colloid; in the second group (G II) 12 volunteers were given the same meal but with 2 labeled eggs in order to increase the caloric content of the solid phase meal. Simultaneous anterior and posterior images were recorded using a dual-headed gamma camera. Solid and liquid geometric mean data were analyzed to determine the lag phase, the emptying rate and the half-emptying time for both solids and liquids. Solid and liquid gastric half-emptying times were significantly prolonged in G II compared to G I volunteers. For the solid phased, the delay was accounted for by a longer lag phase and a decrease in the equilibrium emptying rate. The emptying rate of the liquid phase was significantly decreased in G II compared to G I. Within each group, no statistically significant difference was observed between solid and liquid emptying rates. We conclude that the caloric content of the solid portion of a meal not only alters the emptying of the solid phase but also affects the emptying of the liquid component of the meal. (orig.) [de

Replacement of moist ingredients in the feed training of carnivorous fish

Directory of Open Access Journals (Sweden)

Ana Lúcia Salaro

2012-10-01

Full Text Available The study evaluated the replacement of bovine heart by gelatin in the feed training of carnivorous fish, using giant trahira (Hoplias lacerdae as an experimental model. A completely randomized design with four treatments and five repetitions was employed. The treatments were composed of wet ingredients beef heart (control, gelatin diluted in water, gelatin diluted in beef heart broth, and gelatin diluted in water mixed with fish meal. The fish (3.22±0.03 cm and 0.57±0.01 g were conditioned to accept industrialized diets by the technique of gradual feed ingredients transition in the diet. Gains in weight and length, efficiency of feed training, specific growth rate, cannibalism, mortality and survival rates were evaluated. There was significant difference in weight and length gains and specific growth rate, whereby the use of bovine heart gave the best results. Greater efficiency of feed training was observed for fish fed diets containing beef heart and gelatin diluted in water mixed with fish meal. The high survival rates and the absence of significant differences among treatments for rates of cannibalism, mortality and survival indicate the feasibility of using gelatin as a moist ingredient in the feed training of carnivorous fish.

Short communication: Limit feeding dairy heifers: effect of feed bunk space and provision of a low-nutritive feedstuff.

Science.gov (United States)

Greter, A M; Kitts, B L; Devries, T J

2011-06-01

The objectives of this study were to examine the behavioral effects of providing limit-fed dairy heifers an increased amount of feed bunk space compared with recommended feed bunk allowance, and to determine if the effects of provision of extra bunk space would be comparable to those seen when limit-fed heifers are provided a low-nutritive feedstuff. Twelve Holstein dairy heifers (381.1 ± 44.8 d of age, 417.3 ± 47.9 kg), divided into groups of 4, were exposed to each of 3 treatments using a 3 × 3 Latin square design with 7-d periods. The treatments were (1) 0.68 m of feed bunk space/heifer (TMR-0.68), (2) 0.34 m of feed bunk space/heifer (TMR-0.34), and (3) 0.34 m of feed bunk space/heifer with an additional 0.34 m of feed bunk space available for free-choice straw (TMR-S). The total mixed ration was fed once daily at a restricted level (1.83% of body weight) and contained (dry matter basis) 19.9% alfalfa/grass haylage, 20.1% corn silage, 49.6% high-moisture corn, and 10.4% protein supplement. Group dry matter intake (DMI) was recorded daily. Behavior at the feed bunk was recorded for the last 4 d of each treatment period. Due to the provision of straw, DMI was highest on the TMR-S treatment compared with the other treatments (9.4 vs. 7.8 kg/d). Heifers spent the most time feeding when on the TMR-S treatment (147.7 min/d), with no difference in feeding time between the limit-fed TMR treatments (64.5 min/d). Within the TMR-S treatment, feeding time on the straw was 76.9 min/d; thus, the rate of consumption of only the TMR was similar across all treatments. Unrewarded time at the feed bunk (when no feed was present) did not differ between treatments. Heifers did not differ in competitive behavior when on the limit-fed TMR treatments (13.1 displacements/heifer per day). However, while on the TMR-S treatment, heifers displaced each other more frequently (23.8 displacements/heifer per day) than while on the other 2 treatments. Overall, results suggest that neither

Hydrodynamics of microbial filter feeding

DEFF Research Database (Denmark)

Nielsen, Lasse Tor; Asadzadeh, Seyed Saeed; Dölger, Julia

2017-01-01

Microbial filter feeders are an important group of grazers, significant to the microbial loop, aquatic food webs, and biogeochemical cycling. Our understanding of microbial filter feeding is poor, and, importantly, it is unknown what force microbial filter feeders must generate to process adequate......-feeding choanoflagellate Diaphanoeca grandis using particle tracking, and demonstrate that the current understanding of microbial filter feeding is inconsistent with computational fluid dynamics (CFD) and analytical estimates. Both approaches underestimate observed filtration rates by more than an order of magnitude......; the beating flagellum is simply unable to draw enough water through the fine filter. We find similar discrepancies for other choanoflagellate species, highlighting an apparent paradox. Our observations motivate us to suggest a radically different filtration mechanism that requires a flagellar vane (sheet...

THE INFLUENCE OF THE TOOL POINT ANGLE AND FEED RATE ON THE DELAMINATION AT DRILLING OF PRE-LAMINATED PARTICLEBOARD

Directory of Open Access Journals (Sweden)

Mihai ISPAS

2015-12-01

Full Text Available Pre-laminated particleboard is a wood based composite extensively used in the furniture industry. Drilling is the most common machining process which prepares the panels for joining using twist/helical drills in the absolute majority of cases. The point angle of the drill bit and the feed speed during drilling play a major role in gaining a good surface quality and minimizing the delamination tendency of the pre-laminated particleboard. The objective of this study was to measure and analyze the influence of the two above-mentioned factors on the processing quality, evaluated by de size of delaminations, both, at the entrance side and the exit side of the drill bit. To assess the defect, two parameters were used: the delamination factor and the effective area of delamination. The results showed that, in general, the combination of small point angle with low feed rate minimizes the delamination of pre-laminated particleboard panels at drilling.

Solid state pulse master oscillator of UHF system for linac feeding

International Nuclear Information System (INIS)

Beloglazov, V.I.; Dovbnya, A.N.; Kutsevlyak, S.V.; Mosypan, P.I.

1997-01-01

Possibility of creation of solid state pulse generator which specifies necessary requirements and generates output pulses of several kilowatts and 2.8 Ghz carrier frequency is considered. A model of it was constructed which has parameters close to the needed

Inadequate feeding practices and impaired growth among children from subsistence farming households in Sidama, Southern Ethiopia.

Science.gov (United States)

Gibson, Rosalind S; Abebe, Yewelsew; Hambidge, K Michael; Arbide, Isabel; Teshome, Aklilu; Stoecker, Barbara J

2009-07-01

Whether current child feeding practices and behaviours among rural households in Sidama, Southern Ethiopia conform to the World Health Organization (WHO) guiding principles for complementary feeding is uncertain. We assessed socio-demographic status, anthropometry, breastfeeding, complementary feeding practices and behaviours, and motor development milestones in a convenience sample of 97 breastfed children aged 6-23 months from three rural Sidama communities. Energy and nutrient intakes from complementary foods were also calculated from 1-day in-home weighed records. Prevalence of stunting ranged from 25% for infants aged 6-8 months to 52% for children aged 12-23 months, whereas for wasting, the corresponding prevalence was 10% and 14%, respectively. Very few children were exclusively breastfed up to 6 months of age (n = 2), or received solids/semi-solids for the recommended minimum number of times containing the recommended number of food groups. Responsive feeding was not practised and no cellular animal products were consumed. Median intakes of energy, and intakes and densities of micronutrients from complementary foods (but not protein) were below WHO recommendations, assuming average breast milk intakes; greatest shortfalls were for retinol, vitamin C and calcium densities. Mothers of stunted children were shorter and lighter, and from households of lower socio-economic status than non-stunted children (P feeding practices and behaviours, as well as prenatal influences on growth, are urgently required in this setting.

Modular compact solid-state modulators for particle accelerators

Science.gov (United States)

Zavadtsev, A. A.; Zavadtsev, D. A.; Churanov, D. V.

2017-12-01

The building of the radio frequency (RF) particle accelerator needs high-voltage pulsed modulator as a power supply for klystron or magnetron to feed the RF accelerating system. The development of a number of solid-state modulators for use in linear accelerators has allowed to develop a series of modular IGBT based compact solid-state modulators with different parameters. This series covers a wide range of needs in accelerator technology to feed a wide range of loads from the low power magnetrons to powerful klystrons. Each modulator of the series is built on base of a number of unified solid-state modules connected to the pulse transformer, and covers a wide range of modulators: voltage up to 250 kV, a peak current up to 250 A, average power up to 100 kW and the pulse duration up to 20 μsec. The parameters of the block with an overall dimensions 880×540×250 mm are: voltage 12 kV, peak current 1600 A, pulse duration 20 μsec, average power 10 kW with air-cooling and 40 kW with liquidcooling. These parameters do not represent a physical limit, and modulators to parameters outside these ranges can be created on request.

The animal feed mineral phosphorus tax in Denmark

DEFF Research Database (Denmark)

Andersen, Mikael Skou

2017-01-01

Denmark’s tax on animal feed phosphorus came into effect in 2005 with a tax rate of DKK 4 (EUR 0.53) per kg of phosphorus. It targets commercial animal feed phosphate and aims to reduce the saturation of soils with phosphorus, and leaching to surface waters. Consumption of mineral phosphate...... in animal feeds has been reduced by about 2,000 tonnes (or 15%) since the introduction of the tax, although the tax rate has not been adjusted with inflation. The tax is believed to have improved overall efficiency in the use of animal feed. Farmer organisations did not oppose the tax and accepted...... it as part of a broader package deal on measures to reduce nutrient leaching and pollution of surface waters. Environmental NGOs voiced concerns about impacts on organic farms, and were not strong advocates of the tax. The tax arose from efforts to identify the most cost-effective means for reducing nutrient...

Study of knowledge rate of parturient mothers about breast feeding adventages

Directory of Open Access Journals (Sweden)

mahnaz mardani

2008-02-01

Full Text Available Mardani M1, Mohsen-zadeh A2, Yari-pour M3 1. Assistant professor, Department of Nutritional, Faculty of medicine, Lorestan University of medical sciences 2. Assistant professor, Department of Pediatrics, Faculty of medicine, Lorestan University of medical sciences 3. PhD Student, Faculty of medicine, Lorestan University of medical sciences Abstract Background: Mothers milk is the only nourishing source in the first six months of life. If it is suitable and enough, all nutrients and reguired energe will be provided for a breast–fed to grow. Insufficient knowledge and information, wrong beliefs and traditional information about a breast – fed, working out side the home and the desire of working mothers to feed their children with powdered milk and to start the implementary feeding very early. The increasing of mothers willing to abdominal delivery and being away from the child in the first golden hours and misleading advertisements about powdered milk are all some reasons of decreasing the desire to mothers milk and increasing desire to powdered milk. Therefor, the aim of this study is to consider mothers knowledge about the importance of breast – feeding. Materials and methods: In this study, we completed questionnaires with seventeen questions to parturient mothers who came to Asali hospital in 2006 which included some variables such as benefits of breast feeding, the mother’s milk composition. The information was extracted and analyzed by SPSS software. Results: From 550 parturient mothers who came to Asali hospital in 2006, 33 mothers (6 percent had low knowledge, 216 of them (39 percent had medium knowledge and 301 of them (55 percent had high knowledge. This study indicates that regardless to consider some variables, mothers knowledge has been very high and also there is a significantl relationship between mothers age and their knowledge. The average age of low – knowledge mothers was 26, the medium knowledge was 28 and the high

Cluster randomised controlled trial of a financial incentive for mothers to improve breast feeding in areas with low breastfeeding rates: the NOSH study protocol.

Science.gov (United States)

Relton, Clare; Strong, Mark; Renfrew, Mary J; Thomas, Kate; Burrows, Julia; Whelan, Barbara; Whitford, Heather M; Scott, Elaine; Fox-Rushby, Julia; Anoyke, Nana; Sanghera, Sabina; Johnson, Maxine; Easton, Sue; Walters, Stephen

2016-04-11

Breast feeding can promote positive long-term and short-term health outcomes in infant and mother. The UK has one of the lowest breastfeeding rates (duration and exclusivity) in the world, resulting in preventable morbidities and associated healthcare costs. Breastfeeding rates are also socially patterned, thereby potentially contributing to health inequalities. Financial incentives have been shown to have a positive effect on health behaviours in previously published studies. Based on data from earlier development and feasibility stages, a cluster (electoral ward) randomised trial with mixed-method process and content evaluation was designed. The 'Nourishing Start for Health' (NOSH) intervention comprises a financial incentive programme of up to 6 months duration, delivered by front-line healthcare professionals, in addition to existing breastfeeding support. The intervention aims to increase the prevalence and duration of breast feeding in wards with low breastfeeding rates. The comparator is usual care (no offer of NOSH intervention). Routine data on breastfeeding rates at 6-8 weeks will be collected for 92 clusters (electoral wards) on an estimated 10,833 births. This sample is calculated to provide 80% power in determining a 4% point difference in breastfeeding rates between groups. Content and process evaluation will include interviews with mothers, healthcare providers, funders and commissioners of infant feeding services. The economic analyses, using a healthcare provider's perspective, will be twofold, including a within-trial cost-effectiveness analysis and beyond-trial modelling of longer term expectations for cost-effectiveness. Results of economic analyses will be expressed as cost per percentage point change in cluster level in breastfeeding rates between trial arms. In addition, we will present difference in resource use impacts for a range of acute conditions in babies aged 0-6 months. Participating organisations Research and Governance

Mixing and solid suspension in a stirred precipitator

International Nuclear Information System (INIS)

Chang, T.P.

1986-04-01

Full-scale mixing and solid suspension studies have been conducted to determine the optimum agitator design for precipitators used in plutonium processing. Design considerations include the geometry of precipitator vessels, feed locations, flow patterns, and product requirements. Evaluations of various agitator designs are based on their capabilities: (1) to achieve uniform mixing of reactants in minimum time, (2) to suspend slurry uniformly throughout the vessel, and (3) to minimize power consumption without inducing air entrainment. Tests of full-scale agitator designs showed that significant improvements in mixing, solid suspension, and energy consumption were achieved

Effects of feed intake and dietary urea concentration on ruminal dilution rate and efficiency of bacteria growth in steers

International Nuclear Information System (INIS)

Firkins, J.L.; Lewis, S.M.; Montgomery, L.; Berger, L.L.; Merchen, N.R.; Fahey, G.C. Jr.

1987-01-01

Four multiple-fistulated steers (340 kg) were fed a diet containing 50% ground grass hay, 20% dry distillers grains, and 30% concentrate at two intakes (7.2 or 4.8 kg DM/d). Urea (.4 or 1.2% of the diet) was infused continuously into the steers' rumens. The experimental design was a 4 x 4 Latin square with a 2 x 2 factorial arrangement of treatments. Infusing urea at .4 or 1.2% of the diet resulted in ruminal NH 3 N concentration of 4.97 and 9.10 mg/dl, respectively. Feeding steers at high rather than low intake decreased ruminal and total tract digestibilities of organic matter, NDF, and ADF but did not increase ruminal escape of N. However, apparent N escape from the rumen calculated using purines, but not 15 N, as a bacterial marker was higher when 1.2 vs. .4% urea was infused. Feeding at high rather than at low intake increased the total pool of viable bacteria per gram organic matter fermented in the rumen. Although ruminal fluid outflows and particulate dilution rates were greater when steers were fed at high than low intakes, efficiencies of bacterial protein synthesis were unaffected by intake. The possibility of increased N recycling within the rumen with feeding at the higher intake is discussed

Performance study of ultrafiltration membrane with bovine serum albumin as feed solution

International Nuclear Information System (INIS)

Syahril Ahmad

2009-01-01

Bovine serum albumin solutions at different temperature, pH, flow rate and operation pressure have been used as feed solution for studying performance of ultrafiltration membrane. Polysulfone membranes used for this experiment were in form of hollow fibers that have Molecular Weight Cut Off (MWCO) 60 kDa. Observation was focused on flux parameter and rejection coefficient towards protein during the process. Result shows that temperature, pH of BSA feed solution, flow rate and operation pressure can affect the flux and rejection coefficient of membrane. High temperature feed solution tend to decrease the flux but increase rejection coefficient. Rejection coefficient of membrane will increase while flux decreasing at pH of feed solution near to protein isoelectric point. High pressure of feed solution will increase flux but decrease rejection of membrane. Rejection of membrane will decrease and flux will increase when the process operated in slow flow rate. (author)

Effects of feeding frequency on growth, survival rate and body composition in sea bass (Lates calcarifer) juveniles fed a commercial diet under laboratory condition

OpenAIRE

Erlinda S. Ganzon-Naret

2013-01-01

A 60 day feeding trial was conducted to investigate the effects of different feeding frequencies on the growth, survival rate and body composition of sea bass (Lates calcarifer) juveniles fed commercial diet, reared under laboratory condition. The average initial weight of fish was 4.59 g and its initial total length of 7.11 cm was determined for the conditions factors. Ten fish were stocked in each 12 - 100 L conical fiberglass tanks filled with 90 L seawater at three replicates ...

Interaction between milk allowance and fat content of the starter feed on performance of Holstein calves.

Science.gov (United States)

Araujo, G; Terré, M; Bach, A

2014-10-01

Sixty-six Holstein male calves [42 ± 6.0 kg of body weight (BW) and 12 ± 3.1 d of age] were housed individually and allocated to 1 of 4 treatments following a 2 × 2 factorial complete randomized design to assess the potential interaction between milk replacer (MR) allowance and fat content in the starter feed. Thus, 4 treatments were evaluated: a low-fat (4.1% fat; LF) starter feed offered along with 4 L/d of MR (4 LF), a high-fat (11.2% fat; HF) starter feed plus 4 L/d of MR (4 HF), a LF starter feed offered with 6 L/d of MR (6LF), and an HF starter feed offered with 6 L/d of MR (6 HF). Calves were fed either 4 or 6 L/d of MR (25% crude protein and 19.2% fat) in 2 offers (0800 and 1630 h) and had ad libitum access to either an LF or an HF starter feed (21.4 and 22.3% crude protein). Calves were weaned at wk 6 of study by halving the daily MR allowance for 1 wk. Individual MR and starter feed intakes were recorded daily and BW was determined weekly. A glucose tolerance test was performed on d 30 of study to evaluate the effects of increased energy provision on glucose metabolism. Apparent feed digestibility was measured for the last 5 d of study. Overall, fat content of starter feed had no effect on solid feed intake. However, during wk 8 of study (after weaning), calves in the LF treatment had greater starter feed intake than HF calves. Calves on 6 L/d of MR had greater BW than calves fed 4 L/d from the second week of study until weaning. After weaning, 6 LF calves had lesser BW than 6 HF calves. Calves on 6 L/d of MR had greater average daily gain than calves fed 4 L/d, and 6 HF calves tended to have the greatest average daily gain. Glucose clearance rate tended to be lesser for HF than for LF calves. In conclusion, offering 6 L/d of MR increased growth performance before weaning and, when offering 6 L/d of MR, feeding a high-fat starter feed resulted in the greatest BW after weaning. Copyright © 2014 American Dairy Science Association. Published by Elsevier

Addition of sodium bicarbonate to either 1 or 2 feedings of colostrum replacer: effect on uptake and rate of absorption of immunoglobulin G in neonatal calves.

Science.gov (United States)

Cabral, R G; Kent, E J; Haines, D M; Erickson, P S

2012-06-01

Forty Holstein dairy calves were blocked by birth date and sex, and randomly assigned to 1 of 4 treatments within each block to elucidate the effect of feeding regimen and sodium bicarbonate (NaHCO₃) supplementation on absorption of IgG from colostrum replacer (CR). Calves received CR containing 191.4 g of IgG fed either in 1 feeding at 0 h (within 45 min of birth), with or without 30 g of NaHCO₃, or in 2 feedings (127.6 g of IgG at 0 h, with or without 20 g of NaHCO₃, and 63.8 g of IgG at 6 h, with or without 10 g of NaHCO₃). The treatments were (1) 1 feeding of CR+0 g of NaHCO₃; (2) 1 feeding of CR+30 g of NaHCO₃; (3) 2 feedings of CR+0 g of NaHCO₃; and (4) 2 feedings of CR+30 g total of NaHCO₃. Only calves born with no dystocia were used on this study. Blood samples were taken at 0, 6, 12, 18, and 24h postpartum and were analyzed for IgG using a radial immunoassay. Results indicated that, individually, feeding regimen and NaHCO₃ treatments had no effect. However, the interaction was significant for 24-h IgG and area under the curve, and showed a trend for apparent efficiency of absorption. Absorption rate data indicated that, for calves fed within 45 min of birth, most IgG absorption occurred in the first 6 h after birth. From 6 to 12 h postpartum, IgG absorption started to decrease; however, IgG absorption remained higher for calves fed in a single feeding than in 2 feedings. These data indicated that NaHCO₃ may increase IgG absorption when calves are fed colostrum in a single feeding but is not beneficial when colostrum is fed in 2 feedings. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Association between protein feeding and reproductive efficiency in the dairy cow: specific emphasis on protein feeding in Finland

OpenAIRE

K.J. SHINGFIELD; M. JOKELA; K. KAUSTELL

2008-01-01

Associations between protein feeding and reproductive efficiency in the dairy cow are reviewed. Examination of published data indicated that reproductive responses assessed as days open, services per conception or conception rate following changes in protein feeding tend to be inconsistent. Discrepancies can arise due to between-study variations in experimental design, statistical analysis, sample population size, uterine health, cow age, parity, reproductive management or nutrient intake. De...

A model of clearance rate regulation in mussels

Science.gov (United States)

Fréchette, Marcel

2012-10-01

Clearance rate regulation has been modelled as an instantaneous response to food availability, independent of the internal state of the animals. This view is incompatible with latent effects during ontogeny and phenotypic flexibility in clearance rate. Internal-state regulation of clearance rate is required to account for these patterns. Here I develop a model of internal-state based regulation of clearance rate. External factors such as suspended sediments are included in the model. To assess the relative merits of instantaneous regulation and internal-state regulation, I modelled blue mussel clearance rate and growth using a DEB model. In the usual standard feeding module, feeding is governed by a Holling's Type II response to food concentration. In the internal-state feeding module, gill ciliary activity and thus clearance rate are driven by internal reserve level. Factors such as suspended sediments were not included in the simulations. The two feeding modules were compared on the basis of their ability to capture the impact of latent effects, of environmental heterogeneity in food abundance and of physiological flexibility on clearance rate and individual growth. The Holling feeding module was unable to capture the effect of any of these sources of variability. In contrast, the internal-state feeding module did so without any modification or ad hoc calibration. Latent effects, however, appeared transient. With simple annual variability in temperature and food concentration, the relationship between clearance rate and food availability predicted by the internal-state feeding module was quite similar to that observed in Norwegian fjords. I conclude that in contrast with the usual Holling feeding module, internal-state regulation of clearance rate is consistent with well-documented growth and clearance rate patterns.

Morphology, Kinematics, and Dynamics: The Mechanics of Suction Feeding in Fishes.

Science.gov (United States)

Day, Steven W; Higham, Timothy E; Holzman, Roi; Van Wassenbergh, Sam

2015-07-01

Suction feeding is pervasive among aquatic vertebrates, and our understanding of the functional morphology and biomechanics of suction feeding has recently been advanced by combining experimental and modeling approaches. Key advances include the visualization of the patterns of flow in front of the mouth of a feeding fish, the measurement of pressure inside their mouth cavity, and the employment of analytical and computational models. Here, we review the key components of the morphology and kinematics of the suction-feeding system of anatomically generalized, adult ray-finned fishes, followed by an overview of the hydrodynamics involved. In the suction-feeding apparatus, a strong mechanistic link among morphology, kinematics, and the capture of prey is manifested through the hydrodynamic interactions between the suction flows and solid surfaces (the mouth cavity and the prey). It is therefore a powerful experimental system in which the ecology and evolution of the capture of prey can be studied based on first principals. © The Author 2015. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology. All rights reserved. For permissions please email: journals.permissions@oup.com.

MHz repetition rate solid-state driver for high current induction accelerators

International Nuclear Information System (INIS)

Brooksby, C; Caporaso, G; Goerz, D; Hanks, R; Hickman, B; Kirbie, H; Lee, B; Saethre, R.

1999-01-01

A research team from the Lawrence Livermore National Laboratory and Bechtel Nevada Corporation is developing an all solid-state power source for high current induction accelerators. The original power system design, developed for heavy-ion fusion accelerators, is based on the simple idea of using an array of field effect transistors to switch energy from a pre-charged capacitor bank to an induction accelerator cell. Recently, that idea has been expanded to accommodate the greater power needs of a new class of high-current electron accelerators for advanced radiography. For this purpose, we developed a 3-stage induction adder that uses over 4,000 field effect transistors to switch peak voltages of 45 kV at currents up to 4.8 kA with pulse repetition rates of up to 2 MHz. This radically advanced power system can generate a burst of five or more pulses that vary from 200 ns to 2 ampersand micro;s at a duty cycle of up to 25%. Our new source is precise, robust, flexible, and exceeds all previous drivers for induction machines by a factor of 400 in repetition rate and a factor of 1000 in duty cycle

Aquaponics: integrating fish feeding rates and ion waste production for strawberry hydroponics

Energy Technology Data Exchange (ETDEWEB)

Villarroel, M; Alvarino, J M. R.; Duran, J M

2011-07-01

Aquaponics is the science of integrating intensive fish aquaculture with plant production in recirculating water systems. Although ion waste production by fish cannot satisfy all plant requirements, less is known about the relationship between total feed provided for fish and the production of milliequivalents (mEq) of different macronutrients for plants, especially for nutrient flow hydroponics used for strawberry production in Spain. That knowledge is essential to consider the amount of macronutrients available in aquaculture systems so that farmers can estimate how much nutrient needs to be supplemented in the waste water from fish, to produce viable plant growth. In the present experiment, tilapia (Oreochromis niloticus L.) were grown in a small-scale recirculating system at two different densities while growth and feed consumption were noted every week for five weeks. At the same time points, water samples were taken to measure pH, EC25, HCO3{sup -}, Cl{sup -}, NH{sup +}{sub 4}, NO{sub 2}{sup -}, NO{sub 3}{sup -}, H{sub 2}PO{sub 4}{sup -}, SO{sub 4}{sup 2}-, Na{sup +}, K{sup +}, Ca{sup 2}+ and Mg{sup 2}+ build up. The total increase in mEq of each ion per kg of feed provided to the fish was highest for NO{sub 3}{sup -}, followed, in decreasing order, by Ca{sup 2}+, H{sub 2}PO{sub 4}{sup -}, K{sup +}, Mg{sup 2}+ and SO{sub 4}{sup 2}-. The total amount of feed required per mEq ranged from 1.61 - 13.1 kg for the four most abundant ions (NO{sub 3}{sup -}, Ca{sup 2}+, H{sub 2}PO{sub 4}{sup -} and K{sup +}) at a density of 2 kg fish m{sup -3}, suggesting that it would be rather easy to maintain small populations of fish to reduce the cost of hydroponic solution supplementation for strawberries. (Author) 16 refs.

Individual and Combined Occurrence of Mycotoxins in Feed Ingredients and Complete Feeds in China.

Science.gov (United States)

Ma, Rui; Zhang, Lei; Liu, Meng; Su, Yong-Teng; Xie, Wen-Mei; Zhang, Ni-Ya; Dai, Jie-Fan; Wang, Yun; Rajput, Shahid Ali; Qi, De-Sheng; Karrow, Niel Alexander; Sun, Lv-Hui

2018-03-07

The objective of this study was to investigate the individual and combined contamination of aflatoxin B₁ (AFB₁), zearalenone (ZEN) and deoxynivalenol (DON) in feedstuffs from different Provinces of China between 2016 and 2017. A total of 1569 samples, including 742 feed ingredients and 827 complete pig feed samples, were collected from various regions of China for mycotoxins analysis. The results showed that individual occurrence rates of AFB₁, ZEN, and DON were more than 83.3%, 88%, and 74.5%, respectively, in all the tested samples. DON was the most prevalent contaminant, followed by ZEN and AFB₁, with the average concentrations ranging from 450.0-4381.5 μg/kg, 2.3-729.2 μg/kg, and 1.3-10.0 μg/kg, respectively. Notable, 38.2%, 10.8%, and 0.6% of complete pig feeds were contaminated with DON, ZEN, and AFB₁ over China's regulatory limits, respectively. Moreover, over 75.0% analyzed samples were co-contaminated with two or three mycotoxins. In conclusion, the current study revealed that the feedstuffs in China were severely contaminated with DON, followed by ZEN and AFB₁ during the past two years. These findings highlight the importance of monitoring mycotoxins in livestock feed and implementing feed management and bioremediation strategies to reduce mycotoxin exposure.

Competition during the milk-feeding stage influences the development of feeding behavior of pair-housed dairy calves.

Science.gov (United States)

Miller-Cushon, E K; Bergeron, R; Leslie, K E; Mason, G J; DeVries, T J

2014-10-01

This study investigated how the feeding behavior of pair-housed calves develops in response to reduced teat and feed place availability. Twenty Holstein bull calves were pair housed and provided with milk replacer (MR) and grain concentrate ad libitum via either (1) 1 teat and feed bucket/pen, such that calves could not feed simultaneously [competitive feeding (CF)] or (2) 2 teats and feed buckets/pen [noncompetitive feeding (NCF)]. The calves were weaned during wk 7 of life by incrementally diluting the MR. Postweaning, all pens were managed identically and offered a complete pelleted diet ad libitum via 2 feed buckets/pen (NCF) in period 1 (wk 8 and 9) and period 3 (wk 12 and 13) and exposed to a competitive challenge with CF in period 2 (wk 10 and 11). Feeding times and competitive interactions were recorded from video for 3 d/wk in wk 2, 4, and 6 and 2 d/wk in wk 8 to 13. Meal criteria were used to calculate daily meal frequency, meal time, and synchronized meal time (the percentage of meal time when calves within the pen were engaged in simultaneous meals). Milk replacer intake was subject to a treatment × week interaction, with calves in CF pens having lower MR intake (wk 2: 8.3 vs. 10.0 L/calf per day for CF vs. NCF), but compensating by increasing intake to a greater extent over time (wk 4-5: 13.3 vs. 11.7 L/d for CF vs. NCF). Corresponding to MR intake, meal frequencies and feeding times evolved differently over this period, increasing in CF pens and decreasing in NCF pens (wk 2: 5.8 vs. 11.1 and wk 4-6: 6.2 vs. 5.1 meals/d for CF vs. NCF). Calves in CF pens also spent less time engaged in synchronized meals (28 vs. 51% of meal time; standard error=7.1) and displaced each other 5 times more frequently during synchronized eating. Postweaning, calves in previously CF pens maintained 5 times greater displacement frequencies and had fewer overlapping meals than calves in previously NCF pens (34.5 vs. 40.7% of meals, respectively). Postweaning, when calves

Model-assisted measurements of suspension-feeding flow velocities.

Science.gov (United States)

Du Clos, Kevin T; Jones, Ian T; Carrier, Tyler J; Brady, Damian C; Jumars, Peter A

2017-06-01

Benthic marine suspension feeders provide an important link between benthic and pelagic ecosystems. The strength of this link is determined by suspension-feeding rates. Many studies have measured suspension-feeding rates using indirect clearance-rate methods, which are based on the depletion of suspended particles. Direct methods that measure the flow of water itself are less common, but they can be more broadly applied because, unlike indirect methods, direct methods are not affected by properties of the cleared particles. We present pumping rates for three species of suspension feeders, the clams Mya arenaria and Mercenaria mercenaria and the tunicate Ciona intestinalis , measured using a direct method based on particle image velocimetry (PIV). Past uses of PIV in suspension-feeding studies have been limited by strong laser reflections that interfere with velocity measurements proximate to the siphon. We used a new approach based on fitting PIV-based velocity profile measurements to theoretical profiles from computational fluid dynamic (CFD) models, which allowed us to calculate inhalant siphon Reynolds numbers ( Re ). We used these inhalant Re and measurements of siphon diameters to calculate exhalant Re , pumping rates, and mean inlet and outlet velocities. For the three species studied, inhalant Re ranged from 8 to 520, and exhalant Re ranged from 15 to 1073. Volumetric pumping rates ranged from 1.7 to 7.4 l h -1 for M . arenaria , 0.3 to 3.6 l h -1 for M . m ercenaria and 0.07 to 0.97 l h -1 for C . intestinalis We also used CFD models based on measured pumping rates to calculate capture regions, which reveal the spatial extent of pumped water. Combining PIV data with CFD models may be a valuable approach for future suspension-feeding studies. © 2017. Published by The Company of Biologists Ltd.

Dissolution rate enhancement of repaglinide by solid dispersion

African Journals Online (AJOL)

Keywords: Diabetes, Solid dispersion, Repaglinide, Solubility, Dissolution, Burst release. Tropical Journal of ... high lipophilicity (logP = 3.97) and relatively low oral bioavailability (56 .... II drug, i.e., low soluble and high permeable in nature. As.

Primary genome scan to identify putative quantitative trait loci for feedlot growth rate, feed intake, and feed efficiency of beef cattle.

Science.gov (United States)

Nkrumah, J D; Sherman, E L; Li, C; Marques, E; Crews, D H; Bartusiak, R; Murdoch, B; Wang, Z; Basarab, J A; Moore, S S

2007-12-01

Feed intake and feed efficiency of beef cattle are economically relevant traits. The study was conducted to identify QTL for feed intake and feed efficiency of beef cattle by using genotype information from 100 microsatellite markers and 355 SNP genotyped across 400 progeny of 20 Angus, Charolais, or Alberta Hybrid bulls. Traits analyzed include feedlot ADG, daily DMI, feed-to-gain ratio [F:G, which is the reciprocal of the efficiency of gain (G:F)], and residual feed intake (RFI). A mixed model with sire as random and QTL effects as fixed was used to generate an F-statistic profile across and within families for each trait along each chromosome, followed by empirical permutation tests to determine significance thresholds for QTL detection. Putative QTL for ADG (chromosome-wise P < 0.05) were detected across families on chromosomes 5 (130 cM), 6 (42 cM), 7 (84 cM), 11 (20 cM), 14 (74 cM), 16 (22 cM), 17 (9 cM), 18 (46 cM), 19 (53 cM), and 28 (23 cM). For DMI, putative QTL that exceeded the chromosome-wise P < 0.05 threshold were detected on chromosomes 1 (93 cM), 3 (123 cM), 15 (31 cM), 17 (81 cM), 18 (49 cM), 20 (56 cM), and 26 (69 cM) in the across-family analyses. Putative across-family QTL influencing F:G that exceeded the chromosome-wise P < 0.05 threshold were detected on chromosomes 3 (62 cM), 5 (129 cM), 7 (27 cM), 11 (16 cM), 16 (30 cM), 17 (81 cM), 22 (72 cM), 24 (55 cM), and 28 (24 cM). Putative QTL influencing RFI that exceeded the chromosome-wise P < 0.05 threshold were detected on chromosomes 1 (90 cM), 5 (129 cM), 7 (22 cM), 8 (80 cM), 12 (89 cM), 16 (41 cM), 17 (19 cM), and 26 (48 cM) in the across-family analyses. In addition, a total of 4, 6, 1, and 8 chromosomes showed suggestive evidence (chromosome-wise, P < 0.10) for putative ADG, DMI, F:G, and RFI QTL, respectively. Most of the QTL detected across families were also detected within families, although the locations across families were not necessarily the locations within families, which is

Feeding behavior and digestive physiology in sea cucumber Apostichopus japonicus.

Science.gov (United States)

Sun, Jiamin; Zhang, Libin; Pan, Yang; Lin, Chenggang; Wang, Fang; Kan, Rentao; Yang, Hongsheng

2015-02-01

The feeding behavior and digestive physiology of the sea cucumber, Apostichopus japonicus are not well understood. A better understanding may provide useful information for the development of the aquaculture of this species. In this article the tentacle locomotion, feeding rhythms, ingestion rate (IR), feces production rate (FPR) and digestive enzyme activities were studied in three size groups (small, medium and large) of sea cucumber under a 12h light/12h dark cycle. Frame-by-frame video analysis revealed that all size groups had similar feeding strategies using a grasping motion to pick up sediment particles. The tentacle insertion rates of the large size group were significantly faster than those of the small and medium-sized groups (Psea cucumber were nocturnal and their feeding peaks occurred at 02:00-04:00. The medium and large-sized groups also had a second feeding peak during the day. Both IR and FPR in all groups were significantly higher at night than those during the daytime (P<0.05). Additionally, the peak activities of digestive enzymes were 2-4h earlier than the peak of feeding. Taken together, these results demonstrated that the light/dark cycle was a powerful environment factor that influenced biological rhythms of A. japonicus, which had the ability to optimize the digestive processes for a forthcoming ingestion. Copyright © 2014 Elsevier Inc. All rights reserved.

Effect of Feed Melting, Temperature History and Minor Component Addition on Spinel Crystallization in High-Level Waste Glass

International Nuclear Information System (INIS)

Izak, Pavel; Hrma, Pavel R.; Arey, Bruce W.; Plaisted, Trevor J.

2001-01-01

This study was undertaken to help design mathematical models for high-level waste (HLW) glass melter that simulate spinel behavior in molten glass. Spinel, (Fe,Ni,Mn) (Fe,Cr)2O4, is the primary solid phase that precipitates from HLW glasses containing Fe and Ni in sufficient concentrations. Spinel crystallization affects the anticipated cost and risk of HLW vitrification. To study melting reactions, we used simulated HLW feed, prepared with co-precipitated Fe, Ni, Cr, and Mn hydroxides. Feed samples were heated up at a temperature-increase rate (4C/min) close to that which the feed experiences in the HLW glass melter. The decomposition, melting, and dissolution of feed components (such as nitrates, carbonates, and silica) and the formation of intermediate crystalline phases (spinel, sodalite (Na8(AlSiO4)6(NO2)2), and Zr-containing minerals) were characterized using evolved gas analysis, volume-expansion measurement, optical microscope, scanning electron microscope, thermogravimetric analysis, differential scanning calorimetry, and X-ray diffraction. Nitrates and quartz, the major feed components, converted to a glass-forming melt by 880C. A chromium-free spinel formed in the nitrate melt starting from 520C and Sodalite, a transient product of corundum dissolution, appeared above 600C and eventually dissolved in glass. To investigate the effects of temperature history and minor components (Ru,Ag, and Cu) on the dissolution and growth of spinel crystals, samples were heated up to temperatures above liquidus temperature (TL), then subjected to different temperature histories, and analyzed. The results show that spinel mass fraction, crystals composition, and crystal size depend on the chemical and physical makeup of the feed and temperature history

Iodine Hall Thruster Propellant Feed System for a CubeSat

Science.gov (United States)

Polzin, Kurt A.

2014-01-01

There has been significant work recently in the development of iodine-fed Hall thrusters for in-space propulsion applications.1 The use of iodine as a propellant provides many advantages over present xenon-gas-fed Hall thruster systems. Iodine is a solid at ambient temperature (no pressurization required) and has no special handling requirements, making it safe for secondary flight opportunities. It has exceptionally high ?I sp (density times specific impulse), making it an enabling technology for small satellite near-term applications and providing system level advantages over mid-term high power electric propulsion options. Iodine provides thrust and efficiency that are comparable to xenonfed Hall thrusters while operating in the same discharge current and voltage regime, making it possible to leverage the development of flight-qualified xenon Hall thruster power processing units for the iodine application. Work at MSFC is presently aimed at designing, integrating, and demonstrating a flight-like iodine feed system suitable for the Hall thruster application. This effort represents a significant advancement in state-of-the-art. Though Iodine thrusters have demonstrated high performance with mission enabling potential, a flight-like feed system has never been demonstrated and iodine compatible components do not yet exist. Presented in this paper is the end-to-end integrated feed system demonstration. The system includes a propellant tank with active feedback-control heating, fill and drain interfaces, latching and proportional flow control valves (PFCV), flow resistors, and flight-like CubeSat power and control electronics. Hardware is integrated into a CubeSat-sized structure, calibrated and tested under vacuum conditions, and operated under under hot-fire conditions using a Busek BHT-200 thruster designed for iodine. Performance of the system is evaluated thorugh accurate measurement of thrust and a calibrated of mass flow rate measurement, which is a function of

Household solid waste generation rate and physical composition analysis: case of Sekondi-Takoradi Metropolis in the western region, Ghana

Directory of Open Access Journals (Sweden)

Eugene Atta Nyankson

2015-06-01

Full Text Available Sekondi-Takoradi Metropolis, one of the rapidly expanding cities of Ghana has been facing serious problems with solid waste management. This is mainly due to the lack of available information about the types and quantity of solid waste generation in the area. Hence, the objective of this study was to determine the rate of household solid waste generation and its composition in the aforesaid city. The methodology and procedures for this study were derived from the Standard Test Method for Determination of the Composition of Unprocessed MSW (ASTM D 5231-92. All samples were hand sorted into 6 waste categories (paper, plastic, organics, metals, glass, and other waste. The study revealed that by weight, organic wastes constitutes the largest proportion of household solid waste (38% followed by 19% plastics, 7% papers, 4% metals, 4% glass and 28% other wastes (comprising of sand, stones, ash, inert substances. The rate of daily waste generation per capita in the low, middle and high income households were 0.27±0.19, 0.4±0.19 and 0.58±0.24 kg/cap/day, respectively. The study revealed that there is no waste treatment or recovery facility established within the metropolis hence no significant waste recovery and reuse activities exist. The study showed that more than 38 % of the waste generated in Sekondi-Takoradi Metropolis is decomposable organic matter that can be re-used through composting as well as 34% of the waste having recycling potential thereby considerably mitigating the solid waste problem. DOI: http://dx.doi.org/10.3126/ije.v4i2.12644 International Journal of Environment Vol.4(2 2015: 221-235

BYPRODUCTS OF THE SUGAR INDUSTRY AS ANIMAL FEEDS

African Journals Online (AJOL)

tion of the feeding value of molasses, bagasse and sugar cane tops with special .... complete cattle feeds it is being used by the industry at rates of 10 to 1J90, the ... used molasses at levels of up to 59o (creep, starter ra- tions), 1g9o (grower ...

Artificial Feeds Given in Different Dose to the Growth and Feed Consumption of Semah Fish Seed (Tor Douronensis in Order to Domestication

Directory of Open Access Journals (Sweden)

. Sunarto

2009-01-01

Full Text Available Semah fish (Tor douronensis is a kind of freshwater fish pertained as a wild fish that almost extint and rare, therefore, it is necessary to preserve through the culture activity. Meanwhile, in fish culture effort, feed is considers as an important factor.  Thus, feed must meet a proper quality and quantity due to the fish maintenance, growth, and reproduction requirement. Test feed employed in this research was an artificial feed in form of pellet which was consists of 40% protein by dose tested of 3%, 6%, 9% and 12% of biomass weight. The result indicated that daily growth rate was ranged between 1.44-1.99% by highest growth achieved at feed dose 6% and from the quadratic regression analysis achieved optimal dose by 6.18%.  Daily feed comsumption rate of semah fish seed was ranged between 2.69-10.19% per day.  Feed efficiency was ranged between 13.85-54.09%, and survival rate was 100%. Keywords: dose, growth, feed comsumption, semah fish, Tor douronensis   ABSTRAK Ikan semah (Tor douronensis adalah jenis ikan air tawar yang tergolong jenis ikan liar yang hampir punah dan sudah langka, karena itu perlu upaya pelestariannya dengan usaha pembudidayaan. Dalam usaha budidaya ikan, pakan merupakan salah satu faktor penting. Oleh sebab itu pakan harus berkualitas dengan kuantitas yang tepat sesuai dengan kebutuhan ikan untuk pertumbuhannya, pemeliharaan tubuh dan reproduksi. Pakan uji yang digunakan dalam penelitian ini adalah pakan buatan berupa pelet yang mengandung  protein 40% dengan dosis pakan yang diuji 3%, 6%, 9% dan 12% dari bobot biomassa. Hasil menunjukkan laju pertumbuhan harian berkisar antara 1,99-1,44% dengan pertumbuhan tertinggi dicapai pada dosis pakan 6% dan dari analisis regresi kwadratik diperoleh dosis optimum sebesar 6,18%. Laju konsumsi harian benih ikan semah selama penelitian ini berkisar antara 2,69-10,19 %/hari. Efesiensi pakan berkisar antara 54,09-13,85%, dan tingkat kelangsungan hidup 100% Kata kunci: dosis