WorldWideScience

Sample records for sole source supplier

  1. EPA Sole Source Aquifers

    Data.gov (United States)

    U.S. Environmental Protection Agency — Information on sole source aquifers (SSAs) is widely used in assessments under the National Environmental Policy Act and at the state and local level. A national...

  2. EPA Region 1 Sole Source Aquifers

    Data.gov (United States)

    U.S. Environmental Protection Agency — This coverage contains boundaries of EPA-approved sole source aquifers. Sole source aquifers are defined as an aquifer designated as the sole or principal source of...

  3. Concurrent sourcing and external supplier opportunism

    DEFF Research Database (Denmark)

    Mols, Niels Peter

    costs of opportunism are determined as a product of four factors. The four factors are: likelihood of discovering supplier opportunism, buyer’s internalized quantity as reaction to supplier opportunism, asset specificity of external supplier’s investments, and multiplicator effects. Each......When a firm simultaneously makes and buys the same components then the firm uses concurrent sourcing. This paper presents an agency model for explaining how and when concurrent sourcing reduces the likelihood of external supplier opportunism. In the proposed model, the external supplier’s expected...... of these factors are explained and discussed in the paper. The paper ends by offering a number of theoretical and managerial implications....

  4. EPA Region 1 Sole Source Aquifers

    Science.gov (United States)

    This coverage contains boundaries of EPA-approved sole source aquifers. Sole source aquifers are defined as an aquifer designated as the sole or principal source of drinking water for a given aquifer service area; that is, an aquifer which is needed to supply 50% or more of the drinking water for the area and for which there are no reasonable alternative sources should the aquifer become contaminated.The aquifers were defined by a EPA hydrogeologist. Aquifer boundaries were then drafted by EPA onto 1:24000 USGS quadrangles. For the coastal sole source aquifers the shoreline as it appeared on the quadrangle was used as a boundary. Delineated boundaries were then digitized into ARC/INFO.

  5. Supplier evaluation: The first step in effective sourcing

    Directory of Open Access Journals (Sweden)

    Kateřina Pikousová

    2013-10-01

    Full Text Available The evaluation and selection of suppliers are important tasks in any organisation. Each organisation needs to have a supplier evaluation matrix or model in place. The goal of this article is not only to give an overview of supplier performance evaluation techniques but also to present an example of such a supplier evaluation matrix used in practice. The article shows that suppliers’ qualities, strategies and abilities affect a buying company’s business. Reliable suppliers can help to develop stabile, long-term relationships that will be beneficial to both parties. Effective sourcing and purchasing require high-quality suppliers.

  6. A multi-supplier sourcing problem with a preference ordering of suppliers

    NARCIS (Netherlands)

    Honhon, D.B.L.P.; Gaur, V.; Seshadri, S.

    2012-01-01

    We study a sourcing problem faced by a firm that seeks to procure a product or a component from a pool of alternative suppliers. The firm has a preference ordering of the suppliers based on factors such as their past performance, quality, service, geographical location, and financial strength, which

  7. Sourcing for Quality: Cooperating with a Single Supplier or Developing Two Competing Suppliers?

    Directory of Open Access Journals (Sweden)

    Jingxian Chen

    2016-01-01

    Full Text Available Supplier efforts regarding product quality are an important issue in outsourcing and play a critical role in a manufacturer’s choice of sourcing strategy. Consider a manufacturer that wants to outsource the manufacturing of two substitute products to external suppliers. This paper studies the strategic interactions under two sourcing strategies: single and dual sourcing. A four-stage noncooperative game model is established to describe each member’s decisions. We further propose four decision scenarios: single sourcing with and without manufacturer quality investment sharing and dual sourcing when suppliers cooperate or do not cooperate on quality decisions. By the backward induction approach, we obtain analytical equilibrium solutions for each decision scenario. By comparing each pair of equilibrium profiles, we find that an appropriate proportion of quality investment sharing by the manufacturer can enable a cooperating strategy with a single supplier to be the dominant strategy. When the manufacturer does not want to share or does not want to share a relatively large portion of its supplier’s quality investment, it will always prefer to develop two competing suppliers when the cost of dual sourcing is sufficiently low. However, dual sourcing can be extremely risky for the manufacturer because the suppliers could provide a relatively low product quality level by cooperating on the quality decision to extract the manufacturer’s profit.

  8. E-Sourcing platforms as reasonable marketing tools for suppliers

    OpenAIRE

    Göbl, Martin; Greiter, Thomas

    2014-01-01

    Research questions: E-sourcing platforms offer purchasing organisations often easy access to a high number of relevant suppliers, their goods and services and the accord-ing prices. For the suppliers, e-sourcing platforms are a good and easy pos-sibility to present their products and services to the relevant buyers and to get in contact with potential customers. Subject of this research will be the question, whether e-sourcing platforms are also a reasonable marketing tool for suppliers in or...

  9. Cooperation among liquefied natural gas suppliers. Is rationalization the sole objective?

    International Nuclear Information System (INIS)

    Massol, Olivier; Tchung-Ming, Stephane

    2010-01-01

    This paper examines the development of cooperative strategies between countries exporting Liquefied Natural Gas (LNG) and members of the Gas Exporting Countries Forum (GECF). This economic study focuses specifically on an often-raised scenario: the emergence of a cooperative approach designed with the sole aim of logistic rationalization, and which would not have any effect on LNG prices. We first assess the annual gains that may result from this market-power-free cooperative approach using a simple static transportation model. The numerical results obtained suggest that, in the absence of a gain redistribution policy, this cooperative strategy will probably not be adopted because cooperation would not be a rational move for some exporters. The problem of gain sharing is then formulated using cooperative game theory concepts. Several gain-sharing methods have been studied, including the Shapley value and various nucleolus-inspired concepts. Our results suggest that the choice of a redistribution policy appears relatively restricted. Out of the methods studied, only one - per capita nucleolus - satisfies two key requirements. core belonging and monotonicity (in the aggregate). Lastly, we look at how cooperation may give rise to a coordination cost and try to determine the maximum amount of this cost. In view of the low level of this amount and the relative complexity of the sharing method implemented, we consider that the credibility of a logistic cooperation scenario exempt from market power should be reappraised. (author)

  10. Cooperation among liquefied natural gas suppliers: Is rationalization the sole objective?

    International Nuclear Information System (INIS)

    MASSOL, Olivier; TCHUNG-MING, Stephane

    2009-01-01

    This paper examines the development of cooperative strategies between 12 countries exporting Liquefied Natural Gas (LNG) and belonging to the Gas Exporting Countries Forum (GECF). This economic study is more specifically focused on a scenario often raised: that of the emergence of a cooperative approach designed with the sole aim of logistic rationalization, and which would not have any effect on LNG prices. As this is a standard transportation problem, we first assess the gains that may result from this cooperative approach using a simple static model calibrated on the year 2007. The numerical results obtained suggest that, in the absence of a gain redistribution policy, this cooperative strategy will probably not be adopted because cooperation would not be a rational move for some exporters. The problem of gain sharing is then formulated using cooperative game theory concepts. Several gain sharing methods have been studied, including the Shapley value and various nucleolus-inspired concepts. Our results suggest that the choice of a redistribution policy appears relatively restricted. Out of the methods studied, only one - the per capita nucleolus - satisfies two key requirements: core belonging and mono-tonicity (in the aggregate). Lastly, coordination costs are considered and we determine the maximum amount that can be tolerated by such a cooperation. In view of the low level of this amount and the relative complexity of the sharing method implemented, we consider that the credibility of a logistic cooperation scenario exempt from market power should be reappraised. (authors)

  11. Cooperation among liquefied natural gas suppliers. Is rationalization the sole objective?

    Energy Technology Data Exchange (ETDEWEB)

    Massol, Olivier [Center for Economics and Management, IFP School, 228-232 av. Napoleon Bonaparte, F-92852 Rueil-Malmaison (France); Department of Economics, City University, Northampton Square, London EC1V 0HB (United Kingdom); Tchung-Ming, Stephane [Economic Studies Division, IFP, 1-4 av. de Bois-Preau, F-92852 Rueil Malmaison (France); CREDEN, Universite Montpellier I, Av. de la mer, BP 9606, F-34054, Montpellier (France)

    2010-07-15

    This paper examines the development of cooperative strategies between countries exporting Liquefied Natural Gas (LNG) and members of the Gas Exporting Countries Forum (GECF). This economic study focuses specifically on an often-raised scenario: the emergence of a cooperative approach designed with the sole aim of logistic rationalization, and which would not have any effect on LNG prices. We first assess the annual gains that may result from this market-power-free cooperative approach using a simple static transportation model. The numerical results obtained suggest that, in the absence of a gain redistribution policy, this cooperative strategy will probably not be adopted because cooperation would not be a rational move for some exporters. The problem of gain sharing is then formulated using cooperative game theory concepts. Several gain-sharing methods have been studied, including the Shapley value and various nucleolus-inspired concepts. Our results suggest that the choice of a redistribution policy appears relatively restricted. Out of the methods studied, only one - per capita nucleolus - satisfies two key requirements. core belonging and monotonicity (in the aggregate). Lastly, we look at how cooperation may give rise to a coordination cost and try to determine the maximum amount of this cost. In view of the low level of this amount and the relative complexity of the sharing method implemented, we consider that the credibility of a logistic cooperation scenario exempt from market power should be reappraised. (author)

  12. 1994 Asia/Pacific mining yearbook and suppliers' source

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    Contains a series of articles covering various aspects of the mining and minerals industries of Australia, New Zealand, Malaysia, Indonesia, Thailand, Laos, Vietnam, the Philippines, Russia, China, Myanmar, India and Papua New Guinea. Also contains the 1994 mining products and services buyer's guide, and the 1994 mining suppliers' source directory which provides information on the companies listed in the buyer's guide.

  13. Local sourcing and technology spillovers to Mexican suppliers: How important are FDI and supplier characteristics?

    NARCIS (Netherlands)

    Jordaan, J.A.

    2011-01-01

    I present novel direct evidence on the static and dynamic impact of producer firms on local suppliers based on several firm level surveys that I conducted among producer firms and suppliers in Nuevo León, Mexico. I find that the level of use of suppliers does not differ between foreign direct

  14. Ammonium as sole N source improves grain quality in wheat.

    Science.gov (United States)

    Fuertes-Mendizábal, Teresa; González-Torralba, Jon; Arregui, Luis M; González-Murua, Carmen; González-Moro, M Begoña; Estavillo, José M

    2013-07-01

    The skilful handling of N fertilizer, including N source type and its timing, is necessary to obtain maximum profitability in wheat crops in terms of production and quality. Studies on grain yield and quality with ammonium as sole N source have not yet been conducted. The aim of this study was to evaluate the effect of N source management (nitrate vs. ammonium), and splitting it into two or three amendments during the wheat life cycle, on grain yield and quality under irrigated conditions. This experiment demonstrates that Cezanne wheat plants growing with ammonium as exclusive N source are able to achieve the same yield as plants growing with nitrate and that individual wheat plants grown in irrigated pots can efficiently use late N applied in GS37. Ammonium nutrition increased both types of grain reserve proteins (gliadins and glutenins) and also increased the ratio gli/glu with respect to nitrate nutrition. The splitting of the N rate enhanced the ammonium effect on grain protein composition. The application of ammonium N source, especially when split into three amendments, has an analogous effect on grain protein content and composition to applications at a higher N rate, leading to higher N use efficiency. © 2012 Society of Chemical Industry.

  15. Sole-Source Lighting for Controlled-Environment Agriculture

    Science.gov (United States)

    Mitchell.Cary; Stutte, Gary W.

    2015-01-01

    Since plants on Earth evolved under broad-spectrum solar radiation, anytime they are grown exclusively under electric lighting that does not contain all wavelengths in similar proportion to those in sunlight, plant appearance and size could be uniquely different. Nevertheless, plants have been grown for decades under fluorescent (FL) (1) + incandescent (IN) (2) lamps as a sole source of lighting (SSL), and researchers have become comfortable that, in certain proportions of FL + IN for a given species, plants can appear "normal" relative to their growth outdoors. The problem with using such traditional SSLs for commercial production typically is short lamp lifespans and not obtaining enough photosynthetically active radiation (PAR, 400-700 nm) when desired. These limitations led to supplementation of FL + IN lamp outputs with longer-lived, high-intensity discharge (HID) lamps in growth chambers (3). As researchers became comfortable that mixes of orange-biased high-pressure sodium (HPS) and blue-biased metal halide (MH) HIDs together also could give normal plant growth at higher intensities, growth chambers and phytotrons subsequently were equipped mainly with HID lamps, with their intense thermal output filtered out by ventilated light caps or thermal-controlled water barriers. For the most part, IN and HID lamps have found a home in commercial protected horticulture, usually for night-break photoperiod lighting (IN) or for seasonal supplemental lighting (mostly HPS) in greenhouses. However, lack of economically viable options for SSL have held back aspects of year-round indoor agriculture from taking off commercially.

  16. 75 FR 53269 - Federal Acquisition Regulation; Tribal Consultation; Justification and Approval of Sole-Source 8...

    Science.gov (United States)

    2010-08-31

    ... and approval of sole-source contracts over $20 million under the 8(a) small business development... valuable component of its deliberations in preparing to implement this law, which includes contracting with... Regulation; Tribal Consultation; Justification and Approval of Sole-Source 8(a) Contracts AGENCIES...

  17. 77 FR 23369 - Federal Acquisition Regulation; Justification and Approval of Sole-Source 8(a) Contracts

    Science.gov (United States)

    2012-04-18

    ... Business Administration (SBA) may not accept a sole- source 8(a) contract in excess of $20 million for... is no conflict with the law. Execution of the J&A prior to the SBA's initiation of contract... small number of businesses that have been awarded 8(a) contracts over the $20 million threshold may be...

  18. Cross-departmental collaboration in strategic sourcing as a catalyst for supplier development: The case of Eskom

    Directory of Open Access Journals (Sweden)

    Mzoxolo E. Mbiko

    2017-11-01

    Conclusion: For strategic sourcing to be a catalyst of supplier development, it is essential that an integrated strategic sourcing operating model incorporating the objectives of both CS and SD&L be developed.

  19. Enhanced biological phosphorus removal in a sequencing batch reactor using propionate as the sole carbon source.

    Science.gov (United States)

    Pijuan, M; Saunders, A M; Guisasola, A; Baeza, J A; Casas, C; Blackall, L L

    2004-01-05

    An enhanced biological phosphorus removal (EBPR) system was developed in a sequencing batch reactor (SBR) using propionate as the sole carbon source. The microbial community was followed using fluorescence in situ hybridization (FISH) techniques and Candidatus 'Accumulibacter phosphatis' were quantified from the start up of the reactor until steady state. A series of SBR cycle studies was performed when 55% of the SBR biomass was Accumulibacter, a confirmed polyphosphate accumulating organism (PAO) and when Candidatus 'Competibacter phosphatis', a confirmed glycogen-accumulating organism (GAO), was essentially undetectable. These experiments evaluated two different carbon sources (propionate and acetate), and in every case, two different P-release rates were detected. The highest rate took place while there was volatile fatty acid (VFA) in the mixed liquor, and after the VFA was depleted a second P-release rate was observed. This second rate was very similar to the one detected in experiments performed without added VFA.A kinetic and stoichiometric model developed as a modification of Activated Sludge Model 2 (ASM2) including glycogen economy, was fitted to the experimental profiles. The validation and calibration of this model was carried out with the cycle study experiments performed using both VFAs. The effect of pH from 6.5 to 8.0 on anaerobic P-release and VFA-uptake and aerobic P-uptake was also studied using propionate. The optimal overall working pH was around 7.5. This is the first study of the microbial community involved in EBPR developed with propionate as a sole carbon source along with detailed process performance investigations of the propionate-utilizing PAOs. Copyright 2003 Wiley Periodicals, Inc.

  20. Final PHP bench-scale report for the DOE-ID/SAIC sole source contract

    International Nuclear Information System (INIS)

    1997-04-01

    The Plasma Hearth Process (PHP) Technology Development Project was established to develop, test, and evaluate a new concept for treating mixed waste. The new concept uses direct current (dc) transferred-arc plasma torch technology to process mixed waste into a glass-like end-product. Under the cognizance of the US Department of Energy (DOE) Office of Technology Development (OTD) Mixed Waste Focus Area (MWFA), the technology is being explored for its potential to treat mixed waste. Because it is a mature technology, well-understood and commercially available, it is expected to develop rapidly in this new application. This report summarizes the radioactive bench-scale system activities funded under PHP Sole Source Contract DE-AC07-94ID13266 through the end of the contract

  1. A multiobjective optimization model for optimal supplier selection in multiple sourcing environment

    Directory of Open Access Journals (Sweden)

    M. K. Mehlawat

    2014-06-01

    Full Text Available Supplier selection is an important concern of a firm’s competitiveness, more so in the context of the imperative of supply-chain management. In this paper, we use an approach to a multiobjective supplier selection problem in which the emphasis is on building supplier portfolios. The supplier evaluation and order allocation is based upon the criteria of expected unit price, expected score of quality and expected score of delivery. A fuzzy approach is proposed that relies on nonlinear S-shape membership functions to generate different efficient supplier portfolios. Numerical experiments conducted on a data set of a multinational company are provided to demonstrate the applicability and efficiency of the proposed approach to real-world applications of supplier selection

  2. Isolation and characterization of a bacterium which utilizes polyester polyurethane as a sole carbon and nitrogen source.

    Science.gov (United States)

    Nakajima-Kambe, T; Onuma, F; Kimpara, N; Nakahara, T

    1995-06-01

    Various soil samples were screened for the presence of microorganisms which have the ability to degrade polyurethane compounds. Two strains with good polyurethane degrading activity were isolated. The more active strain was tentatively identified as Comamonas acidovorans. This strain could utilize polyester-type polyurethanes but not the polyether-type polyurethanes as sole carbon and nitrogen sources. Adipic acid and diethylene glycol were probably the main degradation products when polyurethane was supplied as a sole carbon and nitrogen source. When ammonium nitrate was used as nitrogen source, only diethylene glycol was detected after growth on polyurethane.

  3. Assessment of self-organizing maps to analyze sole-carbon source utilization profiles.

    Science.gov (United States)

    Leflaive, Joséphine; Céréghino, Régis; Danger, Michaël; Lacroix, Gérard; Ten-Hage, Loïc

    2005-07-01

    The use of community-level physiological profiles obtained with Biolog microplates is widely employed to consider the functional diversity of bacterial communities. Biolog produces a great amount of data which analysis has been the subject of many studies. In most cases, after some transformations, these data were investigated with classical multivariate analyses. Here we provided an alternative to this method, that is the use of an artificial intelligence technique, the Self-Organizing Maps (SOM, unsupervised neural network). We used data from a microcosm study of algae-associated bacterial communities placed in various nutritive conditions. Analyses were carried out on the net absorbances at two incubation times for each substrates and on the chemical guild categorization of the total bacterial activity. Compared to Principal Components Analysis and cluster analysis, SOM appeared as a valuable tool for community classification, and to establish clear relationships between clusters of bacterial communities and sole-carbon sources utilization. Specifically, SOM offered a clear bidimensional projection of a relatively large volume of data and were easier to interpret than plots commonly obtained with multivariate analyses. They would be recommended to pattern the temporal evolution of communities' functional diversity.

  4. Continuous operation of an ultra-low-power microcontroller using glucose as the sole energy source.

    Science.gov (United States)

    Lee, Inyoung; Sode, Takashi; Loew, Noya; Tsugawa, Wakako; Lowe, Christopher Robin; Sode, Koji

    2017-07-15

    An ultimate goal for those engaged in research to develop implantable medical devices is to develop mechatronic implantable artificial organs such as artificial pancreas. Such devices would comprise at least a sensor module, an actuator module, and a controller module. For the development of optimal mechatronic implantable artificial organs, these modules should be self-powered and autonomously operated. In this study, we aimed to develop a microcontroller using the BioCapacitor principle. A direct electron transfer type glucose dehydrogenase was immobilized onto mesoporous carbon, and then deposited on the surface of a miniaturized Au electrode (7mm 2 ) to prepare a miniaturized enzyme anode. The enzyme fuel cell was connected with a 100 μF capacitor and a power boost converter as a charge pump. The voltage of the enzyme fuel cell was increased in a stepwise manner by the charge pump from 330mV to 3.1V, and the generated electricity was charged into a 100μF capacitor. The charge pump circuit was connected to an ultra-low-power microcontroller. Thus prepared BioCapacitor based circuit was able to operate an ultra-low-power microcontroller continuously, by running a program for 17h that turned on an LED every 60s. Our success in operating a microcontroller using glucose as the sole energy source indicated the probability of realizing implantable self-powered autonomously operated artificial organs, such as artificial pancreas. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. Characterization of Biosurfactant Produced during Degradation of Hydrocarbons Using Crude Oil As Sole Source of Carbon

    Science.gov (United States)

    Patowary, Kaustuvmani; Patowary, Rupshikha; Kalita, Mohan C.; Deka, Suresh

    2017-01-01

    Production and spillage of petroleum hydrocarbons which is the most versatile energy resource causes disastrous environmental pollution. Elevated oil degrading performance from microorganisms is demanded for successful microbial remediation of those toxic pollutants. The employment of biosurfactant-producing and hydrocarbon-utilizing microbes enhances the effectiveness of bioremediation as biosurfactant plays a key role by making hydrocarbons bio-available for degradation. The present study aimed the isolation of a potent biosurfactant producing indigenous bacteria which can be employed for crude oil remediation, along with the characterization of the biosurfactant produced during crude oil biodegradation. A potent bacterial strain Pseudomonas aeruginosa PG1 (identified by 16s rDNA sequencing) was isolated from hydrocarbon contaminated soil that could efficiently produce biosurfactant by utilizing crude oil components as the carbon source, thereby leading to the enhanced degradation of the petroleum hydrocarbons. Strain PG1 could degrade 81.8% of total petroleum hydrocarbons (TPH) after 5 weeks of culture when grown in mineral salt media (MSM) supplemented with 2% (v/v) crude oil as the sole carbon source. GCMS analysis of the treated crude oil samples revealed that P. aeruginosa PG1 could potentially degrade various hydrocarbon contents including various PAHs present in the crude oil. Biosurfactant produced by strain PG1 in the course of crude oil degradation, promotes the reduction of surface tension (ST) of the culture medium from 51.8 to 29.6 mN m−1, with the critical micelle concentration (CMC) of 56 mg L−1. FTIR, LC-MS, and SEM-EDS studies revealed that the biosurfactant is a rhamnolipid comprising of both mono and di rhamnolipid congeners. The biosurfactant did not exhibit any cytotoxic effect to mouse L292 fibroblastic cell line, however, strong antibiotic activity against some pathogenic bacteria and fungus was observed. PMID:28275373

  6. Characterization of Biosurfactant Produced during Degradation of Hydrocarbons Using Crude Oil As Sole Source of Carbon.

    Science.gov (United States)

    Patowary, Kaustuvmani; Patowary, Rupshikha; Kalita, Mohan C; Deka, Suresh

    2017-01-01

    Production and spillage of petroleum hydrocarbons which is the most versatile energy resource causes disastrous environmental pollution. Elevated oil degrading performance from microorganisms is demanded for successful microbial remediation of those toxic pollutants. The employment of biosurfactant-producing and hydrocarbon-utilizing microbes enhances the effectiveness of bioremediation as biosurfactant plays a key role by making hydrocarbons bio-available for degradation. The present study aimed the isolation of a potent biosurfactant producing indigenous bacteria which can be employed for crude oil remediation, along with the characterization of the biosurfactant produced during crude oil biodegradation. A potent bacterial strain Pseudomonas aeruginosa PG1 (identified by 16s rDNA sequencing) was isolated from hydrocarbon contaminated soil that could efficiently produce biosurfactant by utilizing crude oil components as the carbon source, thereby leading to the enhanced degradation of the petroleum hydrocarbons. Strain PG1 could degrade 81.8% of total petroleum hydrocarbons (TPH) after 5 weeks of culture when grown in mineral salt media (MSM) supplemented with 2% (v/v) crude oil as the sole carbon source. GCMS analysis of the treated crude oil samples revealed that P. aeruginosa PG1 could potentially degrade various hydrocarbon contents including various PAHs present in the crude oil. Biosurfactant produced by strain PG1 in the course of crude oil degradation, promotes the reduction of surface tension (ST) of the culture medium from 51.8 to 29.6 mN m -1 , with the critical micelle concentration (CMC) of 56 mg L -1 . FTIR, LC-MS, and SEM-EDS studies revealed that the biosurfactant is a rhamnolipid comprising of both mono and di rhamnolipid congeners. The biosurfactant did not exhibit any cytotoxic effect to mouse L292 fibroblastic cell line, however, strong antibiotic activity against some pathogenic bacteria and fungus was observed.

  7. Glyphosate Shapes a Dinoflagellate-Associated Bacterial Community While Supporting Algal Growth as Sole Phosphorus Source

    Directory of Open Access Journals (Sweden)

    Cong Wang

    2017-12-01

    Full Text Available Glyphosate is a widely used herbicide that can potentially be a phosphorus (P source for phytoplankton and microbes when discharged into the coastal ocean. In contrast to bacteria, few eukaryotic phytoplankton species appear capable of directly utilizing glyphosate. In this study, we observed, after a long delay (>60 days, Prorocentrum donghaiense, a dinoflagellate known to cause major harmful algal blooms in the East China Sea, could grow in a medium with glyphosate as the sole P source; suggesting that P. donghaiense growth was through bacterial mediation. To understand how the bacteria community might respond to glyphosate, we analyzed the 16S rRNA genes of the microbial community present in P. donghaiense cultures when grown under lower (36 μM and higher (360 μM glyphosate concentrations. Based on both Sanger and Illumina high throughput sequencing, we obtained more than 55,323 good-quality sequences, which were classified into six phyla. As the concentration of glyphosate rose, our results showed a significant increase in the phyla Proteobacteria and Firmicutes and a decrease in the phylum Bacteroidetes. Further qPCR (Quantitative PCR analysis showed higher abundances of two specific phylotypes in the higher-glyphosate P. donghaiense cultures when compared to the lower-glyphosate and no-glyphosate cultures. Correspondingly, qPCR displayed the same trend for the abundance of a gammaproteobacterial type of phnJ, a gene encoding Alpha-D-ribose 1-methylphosphonate 5-phosphate C-P lyase, which is responsible for phosphonate degradation. In addition, Tax4Fun analysis based on our 16S rRNA gene sequences results in higher predicted abundances of phosphonate metabolizing genes in glyphosate-treated cultures. This study demonstrates that glyphosate could selectively promote the growth of particular groups of bacteria within an algal culture and in glyphosate enriched coastal waters, this interaction may potentially further facilitate the growth of

  8. FDI, local sourcing and supportive linkages with domestic suppliers: The case of Monterrey, Mexico

    NARCIS (Netherlands)

    Jordaan, J.A.

    2011-01-01

    In this paper, we use unique data from firm level surveys among foreign-owned and domestic producer firms as well as domestic suppliers to obtain novel direct empirical evidence on the level, supportive nature, and impact of input-output linkages in Monterrey, Mexico. Our main empirical findings are

  9. Supplier Innovation

    DEFF Research Database (Denmark)

    Søberg, Peder Veng; Notman, Dorian Mark; Wæhrens, Brian Vejrum

    2017-01-01

    The prevailing research in supplier innovation has been conceptual or based on small data sets. The analysis of a large data set gives a clearer perspective on the actual type and degree of involvement of suppliers in the customer’s innovation process. The supplier perspective of the research...... counterbalances the customer bias that exists in the prevailing literature in this area. Similarly, the issue of the benefit of supplier involvement in the innovation/NPD process can be better understood. Manufacturing suppliers benefit financially from their involvement in the innovation/NPD process of their key...

  10. 5 CFR 890.1048 - Waiver of debarment for a provider that is the sole source of health care services in a community.

    Science.gov (United States)

    2010-01-01

    ... is the sole source of health care services in a community. 890.1048 Section 890.1048 Administrative... HEALTH BENEFITS PROGRAM Administrative Sanctions Imposed Against Health Care Providers Exceptions to the Effect of Debarments § 890.1048 Waiver of debarment for a provider that is the sole source of health care...

  11. A Decision-Making Method with Grey Multi-Source Heterogeneous Data and Its Application in Green Supplier Selection

    Science.gov (United States)

    Dang, Yaoguo; Mao, Wenxin

    2018-01-01

    In view of the multi-attribute decision-making problem that the attribute values are grey multi-source heterogeneous data, a decision-making method based on kernel and greyness degree is proposed. The definitions of kernel and greyness degree of an extended grey number in a grey multi-source heterogeneous data sequence are given. On this basis, we construct the kernel vector and greyness degree vector of the sequence to whiten the multi-source heterogeneous information, then a grey relational bi-directional projection ranking method is presented. Considering the multi-attribute multi-level decision structure and the causalities between attributes in decision-making problem, the HG-DEMATEL method is proposed to determine the hierarchical attribute weights. A green supplier selection example is provided to demonstrate the rationality and validity of the proposed method. PMID:29510521

  12. A Decision-Making Method with Grey Multi-Source Heterogeneous Data and Its Application in Green Supplier Selection.

    Science.gov (United States)

    Sun, Huifang; Dang, Yaoguo; Mao, Wenxin

    2018-03-03

    In view of the multi-attribute decision-making problem that the attribute values are grey multi-source heterogeneous data, a decision-making method based on kernel and greyness degree is proposed. The definitions of kernel and greyness degree of an extended grey number in a grey multi-source heterogeneous data sequence are given. On this basis, we construct the kernel vector and greyness degree vector of the sequence to whiten the multi-source heterogeneous information, then a grey relational bi-directional projection ranking method is presented. Considering the multi-attribute multi-level decision structure and the causalities between attributes in decision-making problem, the HG-DEMATEL method is proposed to determine the hierarchical attribute weights. A green supplier selection example is provided to demonstrate the rationality and validity of the proposed method.

  13. N-(2-PIRYDYLAMINO METHYLENEBISPHOSPHONIC ACID AS A SOLE SOURCE OF A FUNGI FUSARIUM STRAINS GROWING

    Directory of Open Access Journals (Sweden)

    Teresa Krzyśko-Łupicka

    2016-09-01

    The results of growth kinetics of the studied Fusarium fungi in the presence of N-(2-pirydyloamino methyle-nobisphosphonic acid, were expressed by dry weight [g·dm-3]. Only Fusarium oxysporum XVI has been capa-ble to grow in acidic medium (pH 4.0 using N-(2-pirydylamino methylene-bisphosphonic acid as an alterna-tive source of phosphorus. In these conditions the N-(2-pirydylamino methylenebisphosphonic acid degrada-tion was carried out to utilize phosphorus compounds as a source of nutrient components for this strain. The presence of N-(2-pirydylamino methylenebisphosphonic acid receded a growth rate of mycelium but did not have an effect on spores of tested fungi.

  14. Biodegradation and utilization of 4-n-nonylphenol by Aspergillus versicolor as a sole carbon and energy source

    International Nuclear Information System (INIS)

    Krupiński, Mariusz; Janicki, Tomasz; Pałecz, Bartłomiej; Długoński, Jerzy

    2014-01-01

    Highlights: • A. versicolor is able to degrade 4-n-NP as the sole source of carbon and energy. • 4-n-NP removal by A. versicolor was accompanied by the formation of metabolites. • Radioactive experiments show complete 4-n-NP mineralization by A. versicolor. • 4-n-NP initiates heat production in the A. versicolor spores. - Abstract: 4-n-Nonylphenol (4-n-NP) is an environmental pollutant with endocrine-disrupting activities that is formed during the degradation of nonylphenol polyethoxylates, which are widely used as surfactants. Utilization of 4-n-NP by the filamentous fungus Aspergillus versicolor as the sole carbon and energy source was investigated. By means of gas chromatography–mass spectrometry, we showed that in the absence of any carbon source other than 4-n-NP in the medium, A. versicolor completely removed the xenobiotic (100 mg L −1 ) after 3 d of cultivation. Moreover, mass spectrometric analysis of intracellular extracts led to the identification of eight intermediates. The mineralization of the xenobiotic in cultures supplemented with 4-n-NP [ring- 14 C(U)] as a growth substrate was also assessed. After 3 d of incubation, approximately 50% of the initially applied radioactivity was recovered in the form of 14 CO 2 , proving that this xenobiotic was completely metabolized and utilized by A. versicolor as a carbon source. Based on microscopic analysis, A. versicolor is capable of germinating spores under such conditions. To confirm these observations, a microcalorimetric method was used. The results show that even the highest amount of 4-n-NP initiates heat production in the fungal samples, proving that metabolic processes were affected by the use of 4-n-NP as an energetic substrate

  15. Biodegradation and utilization of 4-n-nonylphenol by Aspergillus versicolor as a sole carbon and energy source

    Energy Technology Data Exchange (ETDEWEB)

    Krupiński, Mariusz; Janicki, Tomasz [Department of Industrial Microbiology and Biotechnology, University of Lodz, Banacha 12/16, 90-237 Łódź (Poland); Pałecz, Bartłomiej [Department of Physical Chemistry, University of Lodz, Pomorska 165, 90-236 Łódź (Poland); Długoński, Jerzy, E-mail: jdlugo@biol.uni.lodz.pl [Department of Industrial Microbiology and Biotechnology, University of Lodz, Banacha 12/16, 90-237 Łódź (Poland)

    2014-09-15

    Highlights: • A. versicolor is able to degrade 4-n-NP as the sole source of carbon and energy. • 4-n-NP removal by A. versicolor was accompanied by the formation of metabolites. • Radioactive experiments show complete 4-n-NP mineralization by A. versicolor. • 4-n-NP initiates heat production in the A. versicolor spores. - Abstract: 4-n-Nonylphenol (4-n-NP) is an environmental pollutant with endocrine-disrupting activities that is formed during the degradation of nonylphenol polyethoxylates, which are widely used as surfactants. Utilization of 4-n-NP by the filamentous fungus Aspergillus versicolor as the sole carbon and energy source was investigated. By means of gas chromatography–mass spectrometry, we showed that in the absence of any carbon source other than 4-n-NP in the medium, A. versicolor completely removed the xenobiotic (100 mg L{sup −1}) after 3 d of cultivation. Moreover, mass spectrometric analysis of intracellular extracts led to the identification of eight intermediates. The mineralization of the xenobiotic in cultures supplemented with 4-n-NP [ring-{sup 14}C(U)] as a growth substrate was also assessed. After 3 d of incubation, approximately 50% of the initially applied radioactivity was recovered in the form of {sup 14}CO{sub 2}, proving that this xenobiotic was completely metabolized and utilized by A. versicolor as a carbon source. Based on microscopic analysis, A. versicolor is capable of germinating spores under such conditions. To confirm these observations, a microcalorimetric method was used. The results show that even the highest amount of 4-n-NP initiates heat production in the fungal samples, proving that metabolic processes were affected by the use of 4-n-NP as an energetic substrate.

  16. Levoglucosan kinase involved in citric acid fermentation by Aspergillus niger CBX-209 using levoglucosan as sole carbon and energy source

    Energy Technology Data Exchange (ETDEWEB)

    Zhuang, X.L.; Zhang, H.X.; Tang, J.J. [Chinese Academy of Sciences, Beijing (China). Research Center for Eco-Environmental Sciences

    2001-07-01

    Conditions were optimized for the production of citric acid by a mutant A. niger CBX-209 using levoglucosan derived from pyrolysis of wastepaper as a sole carbon and energy source in a simple medium. The optimum concentration of levoglucosan and wheat bran in the medium was 8% and 3%, respectively, at an optimum initial pH between 5.5 and 6.0 at 35{sup o}C. During fermentation, direct formation of glucose 6-phosphate from levogluocosan in the presence of ATP and Mg{sup 2+} as observed by HPLC in the reaction with both cell extracts and partially purified enzyme, suggested that the enzyme acting on levoglucosan isa kinase. Time-course changes in the levels of this special levoglucosan kinase in A. niger CBX-209 grown on levoglucosan and glucose revealed that levoglucosan kinase was an inductive enzyme. (Author)

  17. Managing supplier relationships in a new product development context

    NARCIS (Netherlands)

    Sjoerdsma, M.; Weele, van A.J.

    2015-01-01

    Organizations can no longer rely solely on their own resources to innovate and therefore look for strategic interactions outside their organizational boundaries. During the past years Early Supplier Involvement, supplier relationship management (SRM) and knowledge exchange in supply chain

  18. CMMI for Systems Engineering, Software Engineering, Integrated Product and Process Development, and Supplier Sourcing, Version 1.1 (CMMI-SE/SW/IPPD/SS, V1.1) Continuous Representation

    National Research Council Canada - National Science Library

    2002-01-01

    .... Concepts covered by this model include systems engineering, software engineering, integrated product and process development, and supplier sourcing as well as traditional CMM concepts such as process...

  19. Capability Maturity Model Integration (CMMISM), Version 1.1 CMMISM for Systems Engineering, Software Engineering, Integrated Product and Process Development, and Supplier Sourcing (CMMI-SE/SW/IPPD/SS, V1.1). Staged Representation

    National Research Council Canada - National Science Library

    2002-01-01

    .... Concepts covered by this model include systems engineering, software engineering, integrated product and process development, and supplier sourcing as well as traditional CMM concepts such as process...

  20. Exploring Fingerprints of the Extreme Thermoacidophile Metallosphaera sedula Grown on Synthetic Martian Regolith Materials as the Sole Energy Sources

    Directory of Open Access Journals (Sweden)

    Denise Kölbl

    2017-10-01

    Full Text Available The biology of metal transforming microorganisms is of a fundamental and applied importance for our understanding of past and present biogeochemical processes on Earth and in the Universe. The extreme thermoacidophile Metallosphaera sedula is a metal mobilizing archaeon, which thrives in hot acid environments (optimal growth at 74°C and pH 2.0 and utilizes energy from the oxidation of reduced metal inorganic sources. These characteristics of M. sedula make it an ideal organism to further our knowledge of the biogeochemical processes of possible life on extraterrestrial planetary bodies. Exploring the viability and metal extraction capacity of M. sedula living on and interacting with synthetic extraterrestrial minerals, we show that M. sedula utilizes metals trapped in the Martian regolith simulants (JSC Mars 1A; P-MRS; S-MRS; MRS07/52 as the sole energy sources. The obtained set of microbiological and mineralogical data suggests that M. sedula actively colonizes synthetic Martian regolith materials and releases free soluble metals. The surface of bioprocessed Martian regolith simulants is analyzed for specific mineralogical fingerprints left upon M. sedula growth. The obtained results provide insights of biomining of extraterrestrial material as well as of the detection of biosignatures implementing in life search missions.

  1. Heterotrophic cultivation of Chlorella pyrenoidosa using sucrose as the sole carbon source by co-culture with Rhodotorula glutinis.

    Science.gov (United States)

    Wang, Shikai; Wu, Yong; Wang, Xu

    2016-11-01

    Heterotrophic cultivation of microalgae is a feasible alternative strategy to avoid the light limitation of photoautotrophic culture, but the heterotrophic utilization of disaccharides is difficult for microalgae. Aimed at this problem, a co-culture system was developed by mix culture of C. pyrenoidosa and R. glutinis using sucrose as the sole carbon source. In this system, C. pyrenoidosa could utilize glucose and fructose which were hydrolyzed from sucrose by R. glutinis. The highest specific growth rate and final cell number proportion of algae was 1.02day(-1) and 45%, respectively, when cultured at the initial algal cell number proportion of 95.24% and the final algal cell density was 111.48×10(6)cells/mL. In addition, the lipid content was also promoted due to the synergistic effects in mix culture. This study provides a novel approach using sucrose-riched wastes for the heterotrophic culture of microalgae and may effectively decrease the cost of carbon source. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Exploring Fingerprints of the Extreme Thermoacidophile Metallosphaera sedula Grown on Synthetic Martian Regolith Materials as the Sole Energy Sources.

    Science.gov (United States)

    Kölbl, Denise; Pignitter, Marc; Somoza, Veronika; Schimak, Mario P; Strbak, Oliver; Blazevic, Amir; Milojevic, Tetyana

    2017-01-01

    The biology of metal transforming microorganisms is of a fundamental and applied importance for our understanding of past and present biogeochemical processes on Earth and in the Universe. The extreme thermoacidophile Metallosphaera sedula is a metal mobilizing archaeon, which thrives in hot acid environments (optimal growth at 74°C and pH 2.0) and utilizes energy from the oxidation of reduced metal inorganic sources. These characteristics of M. sedula make it an ideal organism to further our knowledge of the biogeochemical processes of possible life on extraterrestrial planetary bodies. Exploring the viability and metal extraction capacity of M. sedula living on and interacting with synthetic extraterrestrial minerals, we show that M. sedula utilizes metals trapped in the Martian regolith simulants (JSC Mars 1A; P-MRS; S-MRS; MRS07/52) as the sole energy sources. The obtained set of microbiological and mineralogical data suggests that M. sedula actively colonizes synthetic Martian regolith materials and releases free soluble metals. The surface of bioprocessed Martian regolith simulants is analyzed for specific mineralogical fingerprints left upon M. sedula growth. The obtained results provide insights of biomining of extraterrestrial material as well as of the detection of biosignatures implementing in life search missions.

  3. Suppliers' activities within the controlled zones of licensees handling ionizing radiation sources. Recommendations

    International Nuclear Information System (INIS)

    1999-01-01

    The Recommendations are intended to lay down a unified procedure for preparing licence applications related to ionizing radiation source handling, including the required documentation. The guidelines were set up based on documents of the Dukovany nuclear power plant and adapted to serve the Temelin nuclear power plant and other workplaces handling ionizing radiation sources as well. Selected provisions of applicable legislation are reproduced, and responsibilities are described. The major part of the publication is constituted by model documents, particularly a model Quality Assurance Programme. (P.A.)

  4. Household Solar Photovoltaics: Supplier of Marginal Abatement, or Primary Source of Low-Emission Power?

    Directory of Open Access Journals (Sweden)

    Graham Palmer

    2013-03-01

    Full Text Available With declining system costs and assuming a short energy payback period, photovoltaics (PV should, at face value, be able to make a meaningful contribution to reducing the emission intensity of Australia’s electricity system. However, solar is an intermittent power source and households remain completely dependent on a “less than green” electricity grid for reliable electricity. Further, much of the energy impact of PV occurs outside of the conventional boundaries of PV life-cycle analyses (LCA. This paper examines these competing observations and explores the broader impacts of a high penetration of household PV using Melbourne, Victoria as a reference. It concludes that in a grid dominated by unsequestered coal and gas, PV provides a legitimate source of emission abatement at high, but declining costs, with the potential for network and peak demand support. It may be technically possible to integrate a high penetration of PV, but the economic and energy cost of accommodating high-penetration PV erodes much of the benefits. Future developments in PV, storage, and integration technologies may allow PV to take on a greater long term role, but in the time horizon usually discussed in climate policy, a large-scale expansion of household PV may hinder rather than assist deep cuts to the emission intensity of Australia’s electricity system.

  5. Microrespirometric determination of the effectiveness factor and biodegradation kinetics of aerobic granules degrading 4-chlorophenol as the sole carbon source

    International Nuclear Information System (INIS)

    Vital-Jacome, Miguel; Buitrón, Germán; Moreno-Andrade, Ivan; Garcia-Rea, Victor; Thalasso, Frederic

    2016-01-01

    Highlights: • Microrespirometry was used to characterize aerobic granules. • Kinetic parameters for 4-chorophenol degradation were determined. • Intrinsic and apparent kinetic parameters were quantified and contrasted. • Aerobic granules presented lower μ_m_a_x and higher K_S than disaggregated granules. • Microrespirometry can be useful in model development and calibration. - Abstract: In this study, a microrespirometric method was used, i.e., pulse respirometry in microreactors, to characterize mass transfer and biodegradation kinetics in aerobic granules. The experimental model was an aerobic granular sludge in a sequencing batch reactor (SBR) degrading synthetic wastewater containing 4-chlorophenol as the sole carbon source. After 15 days of acclimation, the SBR process degraded 4-chlorophenol at a removal rate of up to 0.9 kg COD m"−"3 d"−"1, and the degradation kinetics were well described by the Haldane model. The microrespirometric method consisted of injecting pulses of 4-chlorophenol into the 24 wells of a microreactor system containing the SBR samples. From the respirograms obtained, the following five kinetic parameters were successfully determined during reactor operation: (i) Maximum specific oxygen uptake rate, (ii) substrate affinity constant, (iii) substrate inhibition constant, (iv) maximum specific growth rate, and (v) cell growth yield. Microrespirometry tests using granules and disaggregated granules allowed for the determination of apparent and intrinsic parameters, which in turn enabled the determination of the effectiveness factor of the granular sludge. It was concluded that this new high-throughput method has the potential to elucidate the complex biological and physicochemical processes of aerobic granular biosystems.

  6. Microrespirometric determination of the effectiveness factor and biodegradation kinetics of aerobic granules degrading 4-chlorophenol as the sole carbon source

    Energy Technology Data Exchange (ETDEWEB)

    Vital-Jacome, Miguel [Department of Biotechnology and Bioengineering, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional (Cinvestav-IPN), Av. IPN 2508, 07360 México DF, México (Mexico); Buitrón, Germán; Moreno-Andrade, Ivan; Garcia-Rea, Victor [Laboratory for Research on Advanced Process for Water Treatment, Unidad Académica Juriquilla, Instituto de Ingeniería, Universidad Nacional Autónoma de México, Blvd. Juriquilla 3001, Querétaro 76320, México (Mexico); Thalasso, Frederic, E-mail: thalasso@cinvestav.mx [Department of Biotechnology and Bioengineering, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional (Cinvestav-IPN), Av. IPN 2508, 07360 México DF, México (Mexico)

    2016-08-05

    Highlights: • Microrespirometry was used to characterize aerobic granules. • Kinetic parameters for 4-chorophenol degradation were determined. • Intrinsic and apparent kinetic parameters were quantified and contrasted. • Aerobic granules presented lower μ{sub max} and higher K{sub S} than disaggregated granules. • Microrespirometry can be useful in model development and calibration. - Abstract: In this study, a microrespirometric method was used, i.e., pulse respirometry in microreactors, to characterize mass transfer and biodegradation kinetics in aerobic granules. The experimental model was an aerobic granular sludge in a sequencing batch reactor (SBR) degrading synthetic wastewater containing 4-chlorophenol as the sole carbon source. After 15 days of acclimation, the SBR process degraded 4-chlorophenol at a removal rate of up to 0.9 kg COD m{sup −3} d{sup −1}, and the degradation kinetics were well described by the Haldane model. The microrespirometric method consisted of injecting pulses of 4-chlorophenol into the 24 wells of a microreactor system containing the SBR samples. From the respirograms obtained, the following five kinetic parameters were successfully determined during reactor operation: (i) Maximum specific oxygen uptake rate, (ii) substrate affinity constant, (iii) substrate inhibition constant, (iv) maximum specific growth rate, and (v) cell growth yield. Microrespirometry tests using granules and disaggregated granules allowed for the determination of apparent and intrinsic parameters, which in turn enabled the determination of the effectiveness factor of the granular sludge. It was concluded that this new high-throughput method has the potential to elucidate the complex biological and physicochemical processes of aerobic granular biosystems.

  7. Growth of Candida famata and Trichosporon cutaneum on uric acid as the sole source of carbon and energy, a hitherto unknown property of yeasts

    NARCIS (Netherlands)

    Middelhoven, W.J.; Brink, Jolanda A. van den; Veenhuis, M.

    1983-01-01

    Yeast strains capable of utilizing uric acid as the sole source of carbon and energy were isolated from soil by the enrichment culture method. The strains were identified as Candida famata (Harrison) Meyer et Yarrow and Trichosporon cutaneum (De Beurm., Gougerot et Vaucher) Ota. On the subcellular

  8. Supplier selection for strategic supplier development

    OpenAIRE

    Calvi , R.; Le Dain , Marie-Anne; Fendt , T.C.; Herrmann , C.J.

    2010-01-01

    Cahier de recherche n° 2010-11 E4; This article describes the application of the analytic hierarchy process (AHP) to the supplier selection decision for the strategic development of lean suppliers at a large German industrial company. In a literature survey and from explorative interviews, relevant criteria including supplier improvement potential through buyer involvement, strategic factors of the supplier development program as well as project success factors in supplier development were el...

  9. Two models of inventory control with supplier selection in case of multiple sourcing: a case of Isfahan Steel Company

    Science.gov (United States)

    Rabieh, Masood; Soukhakian, Mohammad Ali; Mosleh Shirazi, Ali Naghi

    2016-06-01

    Selecting the best suppliers is crucial for a company's success. Since competition is a determining factor nowadays, reducing cost and increasing quality of products are two key criteria for appropriate supplier selection. In the study, first the inventories of agglomeration plant of Isfahan Steel Company were categorized through VED and ABC methods. Then the models to supply two important kinds of raw materials (inventories) were developed, considering the following items: (1) the optimal consumption composite of the materials, (2) the total cost of logistics, (3) each supplier's terms and conditions, (4) the buyer's limitations and (5) the consumption behavior of the buyers. Among diverse developed and tested models—using the company's actual data within three pervious years—the two new innovative models of mixed-integer non-linear programming type were found to be most suitable. The results of solving two models by lingo software (based on company's data in this particular case) were equaled. Comparing the results of the new models to the actual performance of the company revealed 10.9 and 7.1 % reduction in total procurement costs of the company in two consecutive years.

  10. Production of FucoPol by Enterobacter A47 using waste tomato paste by-product as sole carbon source.

    Science.gov (United States)

    Antunes, Sílvia; Freitas, Filomena; Sevrin, Chantal; Grandfils, Christian; Reis, Maria A M

    2017-03-01

    Out-of-specification tomato paste, a by-product from the tomato processing industry, was used as the sole substrate for cultivation of the bacterium Enterobacter A47 and production of FucoPol, a value-added fucose-rich extracellular polysaccharide. Among the different tested fed-batch strategies, pH-stat, DO-stat and continuous substrate feeding, the highest production (8.77gL -1 ) and overall volumetric productivity (2.92gL -1 d -1 ) were obtained with continuous substrate feeding at a constant flow rate of 11gh -1 . The polymer produced had the typical FucoPol composition (37mol% fucose, 27mol% galactose, 23mol% glucose and 12mol% glucuronic acid, with an acyl groups content of 13wt%). The average molecular weight was 4.4×10 6 Da and the polydispersity index was 1.2. This study demonstrated that out-of-specification tomato paste is a suitable low-cost substrate for the production of FucoPol, thus providing a route for the valorization of this by-product into a high-value microbial product. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Supplier selection criteria and methods: past, present and future

    OpenAIRE

    MUKHERJEE, KRISHNENDU

    2014-01-01

    Sole purpose of supplier selection is not limited to get supply at low cost and at right time. Supplier selection is a strategic decision to fulfil company’s goal for long period of time at low risk. To accomplish this objective companies are moving from reactive buying to proactive buying to give more priority to co-creation of wealth with supplier/s. Considering this issue an attempt has been made in this paper to give systematic review of supplier selection and evaluation process from 2005...

  12. The total cost of logistics in supplier selection, under conditions of multiple sourcing, multiple criteria and capacity constraint

    Directory of Open Access Journals (Sweden)

    Elnaz Bani

    2016-06-01

    Full Text Available This paper presents a mathematical model to solve a multi-objective decision making supplier selection problem. The proposed problem considers three objective functions: the first objective function minimizes the cost of purchasing the products while the second objective function minimizes the due dates and finally the third objective function maximizes the customer satisfaction. The resulted problem is formulated as mixed integer programming and, therefore, we use invasive weed optimization technique to solve the resulted problem. The performance of the proposed model is compared with NSGA II based on different criteria such as mean ideal distance and quality matrix. The preliminary results indicate that the proposed model performs relatively well compared with alternative method.

  13. On the autarchic use of solely PIXE data in particulate matter source apportionment studies by receptor modeling

    Energy Technology Data Exchange (ETDEWEB)

    Lucarelli, F. [Department of Physics and Astronomy, University of Florence, Via G. Sansone 1, 50019 Sesto Fiorentino (Italy); National Institute of Nuclear Physics (INFN)-Florence, Via G. Sansone 1, 50019 Sesto Fiorentino (Italy); Nava, S., E-mail: nava@fi.infn.it [National Institute of Nuclear Physics (INFN)-Florence, Via G. Sansone 1, 50019 Sesto Fiorentino (Italy); Calzolai, G. [Department of Physics and Astronomy, University of Florence, Via G. Sansone 1, 50019 Sesto Fiorentino (Italy); Chiari, M. [National Institute of Nuclear Physics (INFN)-Florence, Via G. Sansone 1, 50019 Sesto Fiorentino (Italy); Giannoni, M.; Traversi, R.; Udisti, R. [Department of Chemistry, University of Florence, Via della Lastruccia 3, 50019 Sesto Fiorentino (Italy)

    2015-11-15

    Particle Induced X-ray Emission (PIXE) analysis of aerosol samples allows simultaneous detection of several elements, including important tracers of many particulate matter sources. This capability, together with the possibility of analyzing a high number of samples in very short times, makes PIXE a very effective tool for source apportionment studies by receptor modeling. However, important aerosol components, like nitrates, OC and EC, cannot be assessed by PIXE: this limitation may strongly compromise the results of a source apportionment study if based on PIXE data alone. In this work, an experimental dataset characterised by an extended chemical speciation (elements, EC–OC, ions) is used to test the effect of reducing input species in the application of one of the most widely used receptor model, namely Positive Matrix Factorization (PMF). The main effect of using only PIXE data is that the secondary nitrate source is not identified and the contribution of biomass burning is overestimated, probably due to the similar seasonal pattern of these two sources.

  14. Scale-up of an alkaline protease from Bacillus pumilus MTCC 7514 utilizing fish meal as a sole source of nutrients.

    Science.gov (United States)

    Gupta, Rishikesh Kumar; Prasad, Dinesh; Sathesh, Jaykumar; Naidu, Ramachandra Boopathy; Kamini, Numbi Ramudu; Palanivel, Saravanan; Gowthaman, Marichetti Kuppuswami

    2012-09-01

    Fish meal grades SL1 and SL2 from Sardine (Sardinella longiceps) and NJ from Pink Perch (Nemipterus japonicas) were evaluated as a sole source of carbon and nitrogen in the medium for alkaline protease production by Bacillus pumilus MTCC 7514. The analysis of the fish meal suggests that the carbon and nitrogen contents in fish meal are sufficient to justify its choice as replacement for other nutrients. Protease production increased significantly (4,914 U/ml) in medium containing only fish meal, compared with the basal medium (2,646 U/ml). However, the elimination of inorganic salts from media reduced the protease productivity. In addition, all the three grades of fish meal yielded almost the same amounts of protease when employed as the sole source of carbon and nitrogen. Nevertheless, the best results were observed in fish meal SL1 medium. Furthermore, protease production was enhanced to 6,966 U/ml and 7,047 U/ml on scaling up from flask (4,914 U/ml) to 3.7 and 20 L fermenters, respectively, using fish meal (10 g/l). Similarly, the corresponding improvement in productivities over flask (102.38 U/ml/h) was 193.5 and 195.75 U/ml/h in 3.7 and 20 L fermenters, respectively. The crude protease was found to have dehairing ability in leather processing, which is bound to have great environmental benefits.

  15. Chemical and microbiological monitoring of a sole-source aquifer intended for artificial recharge, Nassau County, New York

    Science.gov (United States)

    Katz, Brian G.; Mallard, Gail E.

    1980-01-01

    In late 1980, approximately 4 million gallons per day of highly treated wastewater will be used to recharge the groundwater reservoir in central Nassau County through a system of 10 recharge basins and 5 shallow injection wells. To evaluate the impact of large-scale recharge with reclaimed water on groundwater quality, the U.S. Geological Survey has collected hydrologic and water-quality data from a 1-square-mile area around the recharge site to provide a basis for future comparison. Extensive chemical and microbiological analyses are being made on samples from 48 wells screened in the upper glacial (water-table) aquifer and the upper part of the underlying Magothy (public-supply) aquifer. Preliminary results indicate that water from the upper glacial aquifer contains significant concentrations of nitrate and low-molecular-weight chlorinated hydrocarbons and detectable concentrations of organochlorine insecticides and polychlorinated biphenyls. At present, no fecal contamination is evident in either aquifer in the area studied. In the few samples containing fecal indicator bacteria, the numbers were low. Nonpoint sources provide significant loads of organic and inorganic compounds; major sources include cesspool and septic-tank effluent, cesspool and septic-tank cleaners and other over-the-counter domestic organic solvents, fertilizers, insecticides for termite and other pest control, and stormwater runoff to recharge basins. The water-table aquifer is composed mainly of stratified, well-sorted sand and gravel and, as a result, is highly permeable. In the 1-square-mile area studied, some contaminants seem to have traveled 200 feet downward to the bottom of the water-table aquifer and into the upper part of the public-supply aquifer. (USGS)

  16. Outsourcing and supplier learning

    DEFF Research Database (Denmark)

    Lema, Rasmus

    2012-01-01

    that learning from customers was important but insufficient for making the transition. Capability formation depended significantly on other channels and mechanisms outside or independent of outsourcing relationships. This paper shows how firms actively mobilised and combined internal and external sources......There is increasing agreement that Indian software firms are making the transition from competitive advantage based on low cost to competitive advantage based on innovation. However, there are few insights about how this transition process works. This paper seeks to bring together the outsourcing......, global value chains and firm capability literatures. It draws on empirical material focused on learning and innovation ‘events’ in Indian software firms – their inputs and sources – and makes headway in opening the ‘black box’ of supplier learning in outsourcing relationships. This paper suggests...

  17. Emerging nuclear suppliers

    International Nuclear Information System (INIS)

    Sands, A.

    1990-01-01

    Efforts to prevent the spread of nuclear weapons have usually taken two tracks: The traditional approach has concentrated on a potential proliferant's perceived need for nuclear technology and possibly weapons; a second approach has targeted the supply side of the proliferation equation. The issue being examined in this book---emerging nuclear suppliers---falls between these two approaches. The potential proliferants have emerged as possible unrestrained suppliers of nuclear materials and technology. They threaten the entire nonproliferation regime by their exporting, not their weapons development. Analyzing and understanding the issue of emerging suppliers requires a refined definition of suppliers in general. The simple dichotomy of traditional versus emerging suppliers is no longer an adequate framework for analysis. Suppliers differ significantly in their technical capabilities, experience, and regime involvement, and these distinctions result in different nuclear export policies

  18. Key enzymes enabling the growth of Arthrobacter sp. strain JBH1 with nitroglycerin as the sole source of carbon and nitrogen.

    Science.gov (United States)

    Husserl, Johana; Hughes, Joseph B; Spain, Jim C

    2012-05-01

    Flavoprotein reductases that catalyze the transformation of nitroglycerin (NG) to dinitro- or mononitroglycerols enable bacteria containing such enzymes to use NG as the nitrogen source. The inability to use the resulting mononitroglycerols limits most strains to incomplete denitration of NG. Recently, Arthrobacter strain JBH1 was isolated for the ability to grow on NG as the sole source of carbon and nitrogen, but the enzymes and mechanisms involved were not established. Here, the enzymes that enable the Arthrobacter strain to incorporate NG into a productive pathway were identified. Enzyme assays indicated that the transformation of nitroglycerin to mononitroglycerol is NADPH dependent and that the subsequent transformation of mononitroglycerol is ATP dependent. Cloning and heterologous expression revealed that a flavoprotein catalyzes selective denitration of NG to 1-mononitroglycerol (1-MNG) and that 1-MNG is transformed to 1-nitro-3-phosphoglycerol by a glycerol kinase homolog. Phosphorylation of the nitroester intermediate enables the subsequent denitration of 1-MNG in a productive pathway that supports the growth of the isolate and mineralization of NG.

  19. Preferred customer status, supplier satisfaction and their contingencies

    NARCIS (Netherlands)

    Vos, Frederik Guido Sebastiaan

    2017-01-01

    Over the last decades, firms shift increasingly from traditional in-house value creation strategies to cooperative buyer–supplier relationships as a source of value creation and competitive advantage. To reap extensive benefits from relationships with suppliers, assuring supplier satisfaction and

  20. Dependence on Supplier, Supplier Trust and Green Supplier Integration: The Moderating Role of Contract Management Difficulty

    Directory of Open Access Journals (Sweden)

    Xuesong Zhao

    2018-05-01

    Full Text Available This study aims to investigate the impacts of dependence on supplier and supplier trust on green supplier integration, and the moderating role of contract management difficulty. In this study, we develop a dependence-trust-integration model based on resource dependence theory, social capital theory and transaction cost theory. We examine the hypothesized relationships using hierarchical regression analyses based on data collected from 187 Chinese firms. Our findings suggest that dependence on supplier has positive impacts on green supplier integration and supplier trust. Supplier trust partially mediates the relationship between dependence on supplier and green supplier integration. In addition, contract management difficulty negatively moderates the relationship between supplier trust and green supplier integration. This research contributes to the literature by offering empirical evidence concerning the indirect relationship between dependence on supplier and green supplier integration via supplier trust, and the trust-integration link depends on the level of contract management difficulty.

  1. Production of Extra-Cellular Proteases from Marine Bacillus Sp. Cultured in Media Containing Ammonium Sulfate as the Sole Nitrogen Source

    Directory of Open Access Journals (Sweden)

    Seri Intan, M.

    2005-01-01

    Full Text Available Useful bacterial strains can be used to increase mineralize activity of an aquatic system. These bacteria can specifically degrade targeted compound by producing extra-cellular enzymes. Three species of Bacillus i.e. B. subtilis, B. pumilus and B. licheniformis acquired from shrimp ponds were tested for their ability to utilize ammonia and produce extracellular enzymes. These bacteria were grown in artificial seawater (30 ppt salinity and pH 7.6 supplemented with decreasing yeast extract concentration but increasing ammonium sulfate concentration. All three bacteria grew in artificial seawater containing only 0.01% yeast extract and 1% ammonium sulfate. However, only B. pumilus and B. licheniformis were able to grow in the medium containing only 1% ammonium sulfate as a sole energy source. Bacterialgrowth reduced when alkaline proteases activities was maximum from culture filtrates of all three bacterial cultures during 24 hour culturing in artificial seawater containing 0.01% yeast extract and 1% ammonium sulfate at 30 C when assayed at pH 9. Bacterial growth increased when acid proteases activities was maximum from culture filtrates of all three bacterial cultures during 48 hour culturing in artificial seawater containing 0.01% yeast extract and 1% ammoniumsulfate at 30 C when assayed at pH 5.

  2. Supplier Resource Mobilization

    DEFF Research Database (Denmark)

    Ellegaard, Chris; Kragh, Hanne; Andersen, Poul Houman

    theoretical perspectives. This review, synthesis, and resultant discussion allow us to propose that future research should look closer at the resource activation process on the supplier side, the role of the buyer-supplier relationship in resource mobilization, and the approach of the buying company...

  3. Green Supplier Selection Criteria

    DEFF Research Database (Denmark)

    Nielsen, Izabela Ewa; Banaeian, Narges; Golinska, Paulina

    2014-01-01

    Green supplier selection (GSS) criteria arise from an organization inclination to respond to any existing trends in environmental issues related to business management and processes, so GSS is integrating environmental thinking into conventional supplier selection. This research is designed...... to determine prevalent general and environmental supplier selection criteria and develop a framework which can help decision makers to determine and prioritize suitable green supplier selection criteria (general and environmental). In this research we considered several parameters (evaluation objectives......) to establish suitable criteria for GSS such as their production type, requirements, policy and objectives instead of applying common criteria. At first a comprehensive and deep review on prevalent and green supplier selection literatures performed. Then several evaluation objectives defined to assess the green...

  4. A novel pink-pigmented facultative methylotroph, Methylobacterium thiocyanatum sp. nov., capable of growth on thiocyanate or cyanate as sole nitrogen sources.

    Science.gov (United States)

    Wood, A P; Kelly, D P; McDonald, I R; Jordan, S L; Morgan, T D; Khan, S; Murrell, J C; Borodina, E

    1998-02-01

    The isolation and properties of a novel species of pink-pigmented methylotroph, Methylobacterium thiocyanatum, are described. This organism satisfied all the morphological, biochemical, and growth-substrate criteria to be placed in the genus Methylobacterium. Sequencing of the gene encoding its 16S rRNA confirmed its position in this genus, with its closest phylogenetic relatives being M. rhodesianum, M. zatmanii and M. extorquens, from which it differed in its ability to grow on several diagnostic substrates. Methanol-grown organisms contained high activities of hydroxypyruvate reductase -3 micromol NADH oxidized min-1 (mg crude extract protein)-1], showing that the serine pathway was used for methylotrophic growth. M. thiocyanatum was able to use thiocyanate or cyanate as the sole source of nitrogen for growth, and thiocyanate as the sole source of sulfur in the absence of other sulfur compounds. It tolerated high concentrations (at least 50 mM) of thiocyanate or cyanate when these were supplied as nitrogen sources. Growing cultures degraded thiocyanate to produce thiosulfate as a major sulfur end product, apparently with the intermediate formation of volatile sulfur compounds (probably hydrogen sulfide and carbonyl sulfide). Enzymatic hydrolysis of thiocyanate by cell-free extracts was not demonstrated. Cyanate was metabolized by means of a cyanase enzyme that was expressed at approximately sevenfold greater activity during growth on thiocyanate [Vmax 634 +/- 24 nmol NH3 formed min-1 (mg protein)-1] than on cyanate [89 +/- 9 nmol NH3 min-1 (mg protein)-1]. Kinetic study of the cyanase in cell-free extracts showed the enzyme (1) to exhibit high affinity for cyanate (Km 0.07 mM), (2) to require bicarbonate for activity, (3) to be subject to substrate inhibition by cyanate and competitive inhibition by thiocyanate (Ki 0.65 mM), (4) to be unaffected by 1 mM ammonium chloride, (5) to be strongly inhibited by selenocyanate, and (6) to be slightly inhibited by 5 m

  5. The emerging nuclear suppliers

    International Nuclear Information System (INIS)

    Dunn, L.A.

    1990-01-01

    Since the early 1980s, a growing amount of attention has been paid to a small group of mostly developing countries that have come to be called the emerging nuclear suppliers. Argentina and Brazil, China and South Korea, India and Pakistan, Spain and Yugoslavia have frequently been mentioned in this category. Their actual and potential nuclear export dealings and policies have been the subject of academic writings and policy papers, of scholarly symposia and exchanges at meetings of the traditional nuclear suppliers. With foundation and other support, UCLA's Center for International and Strategic Affairs has begun a major project to develop a database on the transactions, policies, and export control institutions of the emerging suppliers. This chapter provides some guidelines for policy toward the emerging nuclear suppliers

  6. Supplier Directory Data

    Data.gov (United States)

    U.S. Department of Health & Human Services — These are the official datasets used on the Medicare.gov Supplier Directory provided by the Centers for Medicare and Medicaid Services. They provide names,...

  7. CERN recognises LHC suppliers

    CERN Multimedia

    2002-01-01

    CERN has just presented the first awards recognising LHC suppliers. The Russian institute BINP, the Belgian firm Cockerill-Sambre and the US company Wah-Chang are the recipients of the first 'Golden Hadrons'.

  8. Managing Supplier Sustainability Risk

    OpenAIRE

    Harilainen, Hanna-Riitta

    2014-01-01

    Supply chains are increasingly global, often reaching to developing regions. The media pressure brand owners to be responsible, but a product is only as sustainable as the practices of all the companies involved in manufacturing it are. It’s not enough that the brand owner acts responsibly; sustainable practices have to reach component and raw material suppliers upstream. Image risk has often been recognized as reason for investing in sustainability. In the supply chain context, supplier m...

  9. SoleSound

    DEFF Research Database (Denmark)

    Zanotto, Damiano; Turchet, Luca; Boggs, Emily Marie

    2014-01-01

    This paper introduces the design of SoleSound, a wearable system designed to deliver ecological, audio-tactile, underfoot feedback. The device, which primarily targets clinical applications, uses an audio-tactile footstep synthesis engine informed by the readings of pressure and inertial sensors...... embedded in the footwear to integrate enhanced feedback modalities into the authors' previously developed instrumented footwear. The synthesis models currently implemented in the SoleSound simulate different ground surface interactions. Unlike similar devices, the system presented here is fully portable...

  10. Supplier Performance Evaluation and Rating System (SPEARS)

    International Nuclear Information System (INIS)

    Oged, M.; Warner, D.; Gurbuz, E.

    1993-03-01

    The SSCL Magnet Quality Assurance Department has implemented a Supplier Performance Evaluation and Rating System (SPEARS) to assess supplier performance throughout the development and production stages of the SSCL program. The main objectives of SPEARS are to promote teamwork and recognize performance. This paper examines the current implementation of SPEARS. MSD QA supports the development and production of SSCsuperconducting magnets while implementing the requirements of DOE Order 5700.6C. The MSD QA program is based on the concept of continuous improvement in quality and productivity. The QA program requires that procurement of items and services be controlled to assure conformance to specification. SPEARS has been implemented to meet DOE requirements and to enhance overall confidence in supplier performance. Key elements of SPEARS include supplier evaluation and selection as well as evaluation of furnished quality through source inspection, audit, and receipt inspection. These elements are described in this paper

  11. Supplier Performance Evaluation and Rating System (SPEARS)

    International Nuclear Information System (INIS)

    Oged, M.; Warner, D.G.; Gurbuz, E.

    1994-01-01

    The SSCL Magnet Quality Assurance Department has implemented a Supplier Performance Evaluation and Rating System (SPEARS) to assess supplier performance throughout the development and production stages of the SSCL program. The main objectives of SPEARS are to promote teamwork and recognize performance. This paper examines the current implementation of SPEARS. MSD QA supports the development and production of SSC superconducting magnets while implementing the requirements of DOE Order 5700.6C. The MSD QA program is based on the concept of continuous improvement in quality and productivity. The QA program requires that procurement of items and services be controlled to assure conformance to specification. SPEARS has been implemented to meet DOE requirements and to enhance overall confidence in supplier performance. Key elements of SPEARS include supplier evaluation and selection as well as evaluation of furnished quality through source inspection, audit, and receipt inspection. These elements are described in this paper

  12. Buyer-supplier relationships and planning solutions

    NARCIS (Netherlands)

    Hvolby, H.H.; Trienekens, J.H.; Steger-Jensen, K.

    2007-01-01

    The paper focuses on supply chain relationships and segmented planning and ICT concepts. Major supplier segments are distinguished based on literature: capacity suppliers, standard suppliers, system suppliers and key suppliers. Next, current supply chain planning solutions are distinguished: vendor

  13. A perfect fuel supplier

    International Nuclear Information System (INIS)

    Terasvirta, R.

    2008-01-01

    WWER fuel market is dominated by the Russian fuel vendor JSC TVEL. There have been attempts to open up the market also for other suppliers, such as BNFL/Westinghouse for Finland, Czech Republic, and Ukraine. However, at the moment it seems that JSC TVEL is the only real alternative to supply fuel to WWER reactors. All existing fuel suppliers have certified quality management systems which put a special emphasis on the customer satisfaction. This paper attempts to define from the customer's point of view, what are the important issues concerning the customer satisfaction. (author)

  14. GSFC Supplier Surveillance

    Science.gov (United States)

    Kelly, Michael P.

    2011-01-01

    Topics covered include: Develop Program/Project Quality Assurance Surveillance Plans The work activities performed by the developer and/or his suppliers are subject to evaluation and audit by government-designated representatives. CSO supports project by selecting on-site supplier representative s by one of several methods: (1) a Defense Contract Management Agency (DCMA) person via a Letter Of Delegation (LOD), (2) an independent assurance contractor (IAC) via a contract Audits, Assessments, and Assurance (A3) Contract Code 300 Mission Assurance Support Contract (MASC)

  15. Suppliers perform balancing act

    International Nuclear Information System (INIS)

    Roggen, M.

    2004-01-01

    Firms that supply network operators in the Netherlands are in a difficult position. Liberalisation emphasises increasing the efficiency and maximising the use of the infrastructure, which is a shift in focus from which suppliers have little to gain. At the same time, their products are expected to meet higher quality standards. Coping with changing customer expectations calls for agility and flexibility [nl

  16. Academic Library-Supplier Relationship: The Experience of Supplier ...

    African Journals Online (AJOL)

    The partnership between an academic library and book suppliers is crucial for the timely and correct delivery of materials for use by customers. This article describes the relationship that exists between the University of Botswana Library (UBL) and its book suppliers. The process of supplier selection and evaluation used by ...

  17. The Navy’s Superior Supplier Incentive Program: Analysis of Supplier Proposed Benefits

    Science.gov (United States)

    2015-12-01

    rather than “short-term, easy, expendable and replaceable sources of goods and services” (Carter & Choi, 2008, p. 2). Japanese automakers Toyota ...was the key element behind Toyota and Honda’s strategic successes. Under the supplier keiretsu, the automakers worked closely with the selected...suppliers to achieve mutually beneficial objectives. Toyota and Honda implemented the keiretsu model in their North American plants and achieved

  18. Managing interdependencies in supplier networks

    OpenAIRE

    Catarina Roseira; Carlos Brito

    2010-01-01

    Building and managing a supplier base has been referred to in the literature as a key aspect of supplier management. Scholars have proposed a number of models aimed at enhancing the effectiveness of supplier network management, mainly based on a portfolio approach. In the IMP tradition of research, those models are often criticized as they ignore the interdependencies between the different existing dyadic relationships of a focal buyer company and its suppliers. Such interdependencies are the...

  19. Production Systems and Supplier Selection

    DEFF Research Database (Denmark)

    Pedraza-Acosta, Isabel; Pilkington, Alan; Barnes, David

    2016-01-01

    strategic stamping suppliers. Findings: Our contribution is the multi-phased production and product innovation process. This is an advance from traditional supplier selection and also an extension of ideas of supplier-located product development as it includes production system development, and complements...

  20. ATLAS recognises its best suppliers

    CERN Multimedia

    2002-01-01

    The ATLAS Collaboration has recently rewarded two of its suppliers in the construction of very major detector components, fabricated in Japan. The ATLAS Supplier Award in recognition of excellent supplier performance has just been attributed to Kawasaki Heavy Industries, while Toshiba Corporation received the award two months ago at their headquarters in Japan.

  1. Two ATLAS suppliers honoured

    CERN Multimedia

    2007-01-01

    The ATLAS experiment has recognised the outstanding contribution of two firms to the pixel detector. Recipients of the supplier award with Peter Jenni, ATLAS spokesperson, and Maximilian Metzger, CERN Secretary-General.At a ceremony held at CERN on 28 November, the ATLAS collaboration presented awards to two of its suppliers that had produced sensor wafers for the pixel detector. The CiS Institut für Mikrosensorik of Erfurt in Germany has supplied 655 sensor wafers containing a total of 1652 sensor tiles and the firm ON Semiconductor has supplied 515 sensor wafers (1177 sensor tiles) from its foundry at Roznov in the Czech Republic. Both firms have successfully met the very demanding requirements. ATLAS’s huge pixel detector is very complicated, requiring expertise in highly specialised integrated microelectronics and precision mechanics. Pixel detector project leader Kevin Einsweiler admits that when the project was first propo...

  2. Managing nuclear supplier risks

    International Nuclear Information System (INIS)

    Ramberg, B.

    1990-01-01

    This paper reports that with the appearance of such third-tier suppliers as Argentina, Brazil, South Korea, Taiwan, China, and others capable of producing nuclear components and sensitive nuclear materials, assurance that importers are using nuclear energy benignly and safely may become more uncertain. It is therefore important to integrate emerging exporters and importers into a regime of norms designed to minimize nuclear risks. The experience of the London Nuclear Suppliers Group (NSG) to arrive at a code of conduct is encouraging. Placed in the context of the larger evolving nuclear energy regime that seeks to address nuclear safety, proliferation, terrorism, and military attacks on reactors, the international community has made substantial progress. Still, there is much that remains to be done

  3. Packaging supplier inspection guide

    International Nuclear Information System (INIS)

    Stromberg, H.M.; Gregg, R.E.; Kido, C.; Boyle, C.D.

    1991-05-01

    This is document is a guide for conducting quality assurance inspections of transportations packaging suppliers, where suppliers are defined as designers, fabricators, distributors, users, or owners of transportation packaging. This document can be used during an inspection to determine regulatory compliance within the requirements of 10 Code of Federal Regulations, Part 71, Subpart H (10 CFR 71.101--71.135). The guidance described in this document provides a framework for an inspection. It provides the inspector with the flexibility to adapt the methods and concepts presented here to meet the needs of the particular facility being inspected. The guide was developed to ensure a structured and consistent approach for inspections. The method treats each activity at a supplier facility as a separate entity (or functional element), and combines the activities within the framework of an ''inspection tree.'' The method separates each functional element into several areas of performance and then identifies guidelines, based on regulatory requirements, to be used to qualitatively rate each area. This document was developed to serve as a field manual to facilitate the work of inspectors. 1 ref., 1 fig., 5 tabs

  4. Industrial tissue: perennialization of suppliers

    International Nuclear Information System (INIS)

    Pin, M.; Hutin, J.P.; Tetreau, F.

    1996-01-01

    The durability of industrial tissue is a necessary condition, and certainly the most important, for the performance of actual park and the successful of its renewal. Reciprocally, the maintenance and the evolution of the actual park, the preparation of its renewal, are sources of activities to insure this durability of industrial and favour their international development. In the period of reduced activity, which began for the nuclear market, the dialogue which has always existed between EDF and its suppliers must be reinforced, in the respect of their respective responsibility, to insure: a right reciprocal understanding of activities and strategies, a right adaptation to these activities, and finally, the maintenance of the competitiveness. (N.C.)

  5. Preferred supplier contracts in post-patent prescription drug markets.

    Science.gov (United States)

    Blankart, Carl Rudolf; Stargardt, Tom

    2016-02-22

    In recent years, the expiration of patents for large drug classes has increased the importance of post-patent drug markets. However, previous research has focused solely on patent drug markets. In this study, the authors evaluate the influence of preferred supplier contracts, the German approach to tendering, in post-patent drug markets using a hierarchical market share attraction model. The authors find that preferred supplier contracts are a powerful strategic instrument for generic manufacturers in a highly competitive environment. They quantify the effects of signing a preferred supplier contract and show that brand-name manufacturers are vulnerable to tendering. Therefore, brand-name manufacturers should readjust their strategies and consider including preferred supplier contracts in their marketing mix. In addition, the authors employ a simulation to demonstrate that a first-mover advantage might be gained from signing a preferred supplier contract. Furthermore, their results can be used as a blueprint for decision makers in the pharmaceutical industry to assess the market share effects of different contracting strategies regarding preferred supplier contracts.

  6. The use of acetonitrile as the sole nitrogen and carbon source by Geotrichum sp. JR1 Uso de acetonitrila como única fonte de carbono e nitrogênio por Geotrichum sp. JR1

    Directory of Open Access Journals (Sweden)

    Rachel Passos Rezende

    2004-06-01

    Full Text Available A yeast strain identified as Geotrichum sp. JR1 was able to use acetonitrile as the sole carbon and nitrogen source. The strain grew in 0.5 to 2M acetonitrile. Ammonia generation as enzymatic product during the strain growth indicates the presence of an acetonitrile degrading enzyme. Acetic acid and acetamide were detected during assays with the resting cells cultivated in acetonitrile, indicating the presence of nitrile and amide degrading enzymes. This paper is the first to describe the use of acetonitrile as the sole carbon and nitrogen source by a yeast.Uma linhagem de levedura identificada como Geotrichum sp. JR1 foi capaz de utilizar acetonitrila, em concentrações de 0,5 a 2M, como única fonte de carbono e de nitrogênio. A geração de amônia durante o crescimento do microrganismo indica a presença de sistema enzimático capaz de degradar acetonitrila. Durante os ensaios enzimáticos, com células cultivadas em acetonitrila, foram detectados ácido acético e acetamida como produtos indicando a presença de sistema enzimático capaz de degradar acetonitrila e acetamida. Este trabalho é o primeiro a descrever a utilização de acetonitrila como única fonte de carbono e de nitrogênio por uma levedura.

  7. LHC: seven golden suppliers

    CERN Multimedia

    2005-01-01

    The fourth CERN Golden Hadron awards saw seven of the LHC's best suppliers receive recognition for the high quality of their work, compliance with delivery deadlines, flexibility and adaptability to the demanding working conditions of the project. The representatives of the seven companies which received awards during the Golden Hadron ceremony, standing with Lyn Evans, LHC Project Leader. 'The Golden Hadron awards are a symbol of our appreciation of not only the quality and timely delivery of components but also the collaborative and flexible way the firms have contributed to this very difficult project,' said Lyn Evans, head of the LHC project. The awards went to Kemppi-Kempower (Finland), Metso Powdermet (Finland), Transtechnik (Germany), Babcock Noell Nuclear (Germany), Iniziative Industriali (Italy), ZTS VVU Kosice (Slovakia), and Jehier (France). Babock Noell Nuclear (BNN) successfully produced one-third (416 cold dipole masses) of the LHC's superconducting dipole magnets, one of the most critical an...

  8. Value for value : the dynamics of supplier value in collaborative new product development.

    NARCIS (Netherlands)

    Smals, R.G.M.; Smits, A.A.J.

    2012-01-01

    Suppliers are recognized as an important source of innovation. Research into supplier involvement in new product development has shown that benefits can potentially be reaped by customers. However, a relatively unexplored precondition is the willingness of suppliers to invest in their customers’

  9. The competition for supplier resources

    NARCIS (Netherlands)

    Pulles, Niels Jaring

    2014-01-01

    Suppliers can have a major influence on the overall competitiveness of a firm. When firms lack certain capabilities or resources within their own organization, collaborations with suppliers can help them to acquire these resources and capabilities externally and improve competitive advantage.

  10. Identifying tier one key suppliers.

    Science.gov (United States)

    Wicks, Steve

    2013-01-01

    In today's global marketplace, businesses are becoming increasingly reliant on suppliers for the provision of key processes, activities, products and services in support of their strategic business goals. The result is that now, more than ever, the failure of a key supplier has potential to damage reputation, productivity, compliance and financial performance seriously. Yet despite this, there is no recognised standard or guidance for identifying a tier one key supplier base and, up to now, there has been little or no research on how to do so effectively. This paper outlines the key findings of a BCI-sponsored research project to investigate good practice in identifying tier one key suppliers, and suggests a scalable framework process model and risk matrix tool to help businesses effectively identify their tier one key supplier base.

  11. A pragmatic decision model for inventory management with heterogeneous suppliers

    Science.gov (United States)

    Nakandala, Dilupa; Lau, Henry; Zhang, Jingjing; Gunasekaran, Angappa

    2018-05-01

    For enterprises, it is imperative that the trade-off between the cost of inventory and risk implications is managed in the most efficient manner. To explore this, we use the common example of a wholesaler operating in an environment where suppliers demonstrate heterogeneous reliability. The wholesaler has partial orders with dual suppliers and uses lateral transshipments. While supplier reliability is a key concern in inventory management, reliable suppliers are more expensive and investment in strategic approaches that improve supplier performance carries a high cost. Here we consider the operational strategy of dual sourcing with reliable and unreliable suppliers and model the total inventory cost where the likely scenario lead-time of the unreliable suppliers extends beyond the scheduling period. We then develop a Customized Integer Programming Optimization Model to determine the optimum size of partial orders with multiple suppliers. In addition to the objective of total cost optimization, this study takes into account the volatility of the cost associated with the uncertainty of an inventory system.

  12. Evaluation and election of suppliers

    International Nuclear Information System (INIS)

    Zhang Guibao

    2001-01-01

    Based on the construction experience in nuclear power plants, the author presents some methods of evaluation and selection for suppliers. It is applicable to various stages of nuclear power plants, furthermore, it can be used for other buyers

  13. ATLAS recognises its best suppliers

    CERN Multimedia

    Jenni, P

    The ATLAS Collaboration has recently rewarded two of its suppliers in the construction of very major detector components, fabricated in Japan. The ATLAS Supplier Award in recognition of excellent supplier performance was attributed on 2nd September 2002 during a ceremony in Hall 180 to Kawasaki Heavy Industries, while Toshiba Corporation received the award two months before at their headquarters in Japan. The ATLAS experiment will become a reality thanks to a large international collaboration partnership. The industrial suppliers for the components all over the world play a major role in the construction of this gigantic jigsaw for the LHC. And sometimes they perform so well, that their work deserves specially to be recognised. This is the case for Kawasaki Heavy Industries and Toshiba Corporation, producers of the Liquid Argon Barrel Cryostat and of the Superconducting Central Solenoid, respectively. With these awards, the ATLAS Collaboration wants to congratulate Kawasaki and Toshiba for fulfilling the hi...

  14. Why Didn't They Ask the Supplier? The Utilization of Supplier Information and Knowledge in the Fuzzy Front End of New Product Development

    NARCIS (Netherlands)

    Kopecká, J.A.

    2013-01-01

    In today’s world of multi-component and multi-technology products, firms are obliged to seek knowledge for new product development (NPD) from external sources. Supplier firms are one such external source. The thesis aims to contribute to the development of a theory on supplier involvement in new

  15. Aluminium supplier selection for the automotive parts manufacturer

    Directory of Open Access Journals (Sweden)

    M. Cieśla

    2016-04-01

    Full Text Available This paper presents a methodology for selection of the optimal sources of supply, which is also known as the problem of supplier selection. Theoretical considerations are expanded with research related to aluminium supplier selection for a hypothetical manufacturer of aluminium parts for transportation equipment located in Poland. Evaluation of five suppliers of aluminium from Poland, Germany and Slovenia has been conducted using a weighted scoring method, a strengths and weaknesses method and a graphical method. Choosing the best offer and prioritizing suppliers allows not only the most rational decision in the field of supply logistics to be taken but also the quality of service in the metallurgical industry to be improved.

  16. The policies of supplier nations

    International Nuclear Information System (INIS)

    Moher, M.J.

    1987-01-01

    This chapter is concerned with the nuclear non-proliferation element of the policies of supplier nations. These policies include economic, commercial, resource management, financial and technological aspects. The evolution of the nuclear export policies of supplier nations is considered. The challenges facing the non-proliferation regime are looked at. Finally, the progress made is reviewed. Although this has been considerable, further work is necessary and this is mentioned. The postscript assesses the situation following the successful Third NPT Review Conference held in 1985. (U.K.)

  17. The particle suppliers

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    Particles are supplied to the LHC by six accelerators inter-connected by several kilometres of transfer lines. This represents yet another complex chain of processes whereby particles are produced, bunched, synchronised and injected into the LHC at the precise moment it's ready to receive them. In other words, for collisions to be produced at the end of the chain, all the injectors must be in perfect working order.   Among all the questions asked by the many visitors to CERN, one in particular comes up time and time again: "Why don't you just connect the LHC directly to the proton source?" In other words, why do you need this whole chain of accelerators acting as an "injector" for the LHC? Before colliding inside the LHC, particles first have to pass through no fewer than six different accelerators: the 90 keV duoplasmatron source, the 750 keV RFQ, the 50 MeV Linac 2, the 1.4 GeV synchrotron injector ("PS Booster" or PSB), the 25 GeV Proton Sy...

  18. Shifting orders among suppliers considering risk, price and transportation cost

    Science.gov (United States)

    Revitasari, C.; Pujawan, I. N.

    2018-04-01

    Supplier order allocation is an important supply chain decision for an enterprise. It is related to the supplier’s function as a raw material provider and other supporting materials that will be used in production process. Most of works on order allocation has been based on costs and other supply chain performance, but very limited of them taking risks into consideration. In this paper we address the problem of order allocation of a single commodity sourced from multiple suppliers considering supply risks in addition to the attempt of minimizing transportation costs. The supply chain risk was investigated and a procedure was proposed in the risk mitigation phase as a form of risk profile. The objective including risk profile in order allocation is to maximize the product flow from a risky supplier to a relatively less risky supplier. The proposed procedure is applied to a sugar company. The result suggests that order allocations should be maximized to suppliers that have a relatively low risk and minimized to suppliers that have a relatively larger risks.

  19. Industrial Buyer-Supplier Cooperation

    DEFF Research Database (Denmark)

    Olsen, Rasmus Friis

    The dissertation considers industrial buyer-supplier cooperation from a systems and management perspective. The purpose is to discuss and elaborate on the buying company’s choice of cooperation strategy (governance mechanism). It is stated that no single governance mechanism will be the best in all...

  20. A new approach to the modification of cell membrane glycosphingolipids: Ganglioside composition of JTC-12 P3 cells altered by feeding with galactose as a sole carbohydrate source in protein- and lipid-free synthetic medium

    International Nuclear Information System (INIS)

    Kawaguchi, Tatsuya; Takaoka, Toshiko; Yoshida, Eiko; Iwamori, Masao; Nagai, Yoshitaka; Takatsuki, Kiyoshi

    1988-01-01

    A significant difference in the glycosphingolipid composition of JTC-12 P3 cells established from monkey kidney tissue was observed when cells cultured in a protein- and lipid-free synthetic medium containing glucose (DM-160) as a sole carbohydrate source were transferred and cultured in the same medium containing galactose and pyruvic acid (DM-170) in place of glucose. In particular, the amounts of gangliosides GM3, GM2, and GD3 in the cells cultured in DM-170 were 5.3-, 17.8-, and more than 8-fold those in the cells cultured in DM-160, respectively, indicating that anabolism of gangliosides is greatly enhanced in cells cultured in the presence of galactose and pyruvic acid, as compared with cells cultured in the presence of glucose. In fact, after cultivation of cells in the medium with N-acetyl-D-[ 14 C]mannosamine for 96 h, the radioactivity incorporated into the gangliosides of the cells in DM-170 was 10-fold that of the cells in DM-160. Among the gangliosides of the cells in DM-170, highly sialylated molecules such as GD3, GD1a, GD1b, and GT1b were preferentially labeled, indicating that the sialytransferases responsible for the synthesis of gangliosides are significantly more activated in cells cultured in DM-170 than in DM-160. These observations reveal that the glycosphingolipid composition of the plasma membrane can be modified epigenetically under well-defined conditions and provide important clues for clarifying the roles of glycosphingolipids associated with particular cell functions

  1. Green Suppliers Network Supply Chain Commitment Form

    Science.gov (United States)

    Online form to show your company desires to be a Green Suppliers Network supply chain. Expresses an intent to: commit to engage at least five suppliers to complete an assessment process within a 12-month period and more.

  2. Medicare Provider Data - Physician and Other Supplier

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Physician and Other Supplier Public Use File (Physician and Other Supplier PUF) provides information on services and procedures provided to Medicare...

  3. Managing uncertainty in potential supplier identification

    OpenAIRE

    Ye , Yun ,; Jankovic , Marija; Okudan Kremer , Gül E.; Bocquet , Jean-Claude

    2014-01-01

    International audience; As a benefit of modularization of complex systems, Original Equipment Manufacturers (OEMs) can choose suppliers in a less constricted way when faced with new or evolving requirements. Before a supplier is selected for each module, a group of potential suppliers should be identified in order to control the uncertainty along with other performance measures of the new system development. In modular design, because suppliers are more involved in system development, the pot...

  4. Performance Determinants for Convenience Store Suppliers

    OpenAIRE

    Zainah Abdullah; Aznur Hajar Abdullah

    2012-01-01

    This paper examines the impact of information and communication technology (ICT) usage, internal relationship, supplier-retailer relationship, logistics services and inventory management on convenience store suppliers- performance. Data was collected from 275 convenience store managers in Malaysia using a set of questionnaire. The multiple linear regression results indicate that inventory management, supplier-retailer relationship, logistics services and internal relation...

  5. 22 CFR 130.7 - Supplier.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Supplier. 130.7 Section 130.7 Foreign Relations... § 130.7 Supplier. Supplier means any person who enters into a contract with the Department of Defense for the sale of defense articles or defense services valued in an amount of $500,000 or more under...

  6. ALICE honours two Italian suppliers

    CERN Multimedia

    2006-01-01

    During the ALICE week held in Bologna from 19 to 23 June, the Collaboration recognized two of its top suppliers. From left to right: Robert Terpin (MIPOT), Pier Luigi Bellutti (ITC), Andrea Zanotti, President of ITC, Luciano Bosisio (Trieste University), Gennady Zinovjev (Kiev), Catherine Decosse (CERN), Lodovico Riccati, ALICE Collaboration Board Chair (INFN Torino), Paolo Giubellino (INFN Torino), Mario Zen, Director of ITC, Maurizio Boscardin (ITC), Paolo Tonella (ITC), Jurgen Schukraft, ALICE Spokesperson (CERN), Giacomo Vito Margagliotti (Trieste University), Nevio Grion (INFN Trieste), Marco Bregant (INFN Trieste). Front row from left to right: Paolo Traverso (ITC), Federico Carminati, ALICE Computing Project Leader (CERN), and Jean-Robert Lutz, ITS-SSD Project leader (IPHC Strasbourg). It is in the picturesque city of Bologna that the ALICE Collaboration has rewarded two Italian suppliers, Istituto Trentino di Cultura ITC-irst (Trento) and MIPOT (Cormons), both involved in the construction of the Sili...

  7. Supplier Cooperation in Drone Delivery

    OpenAIRE

    Sawadsitang, Suttinee; Niyato, Dusit; Siew, Tan Puay; Wang, Ping

    2018-01-01

    Recently, unmanned aerial vehicles (UAVs), also known as drones, has emerged as an efficient and cost-effective solution for package delivery. Especially, drones are expected to incur lower cost, and achieve fast and environment friendly delivery. While most of existing drone research concentrates on surveillance applications, few works studied the drone package delivery planning problem. Even so, the previous works only focus on the drone delivery planning of a single supplier. In this paper...

  8. Integrated multi-choice goal programming and multi-segment goal programming for supplier selection considering imperfect-quality and price-quantity discounts in a multiple sourcing environment

    Science.gov (United States)

    Chang, Ching-Ter; Chen, Huang-Mu; Zhuang, Zheng-Yun

    2014-05-01

    Supplier selection (SS) is a multi-criteria and multi-objective problem, in which multi-segment (e.g. imperfect-quality discount (IQD) and price-quantity discount (PQD)) and multi-aspiration level problems may be significantly important; however, little attention had been given to dealing with both of them simultaneously in the past. This study proposes a model for integrating multi-choice goal programming and multi-segment goal programming to solve the above-mentioned problems by providing the following main contributions: (1) it allows decision-makers to set multiple aspiration levels on the right-hand side of each goal to suit real-world situations, (2) the PQD and IQD conditions are considered in the proposed model simultaneously and (3) the proposed model can solve a SS problem with n suppliers where each supplier offers m IQD with r PQD intervals, where only ? extra binary variables are required. The usefulness of the proposed model is explained using a real case. The results indicate that the proposed model not only can deal with a SS problem with multi-segment and multi-aspiration levels, but also can help the decision-maker to find the appropriate order quantities for each supplier by considering cost, quality and delivery.

  9. An integrated model for supplier selection process

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    In today's highly competitive manufacturing environment, the supplier selection process becomes one of crucial activities in supply chain management. In order to select the best supplier(s) it is not only necessary to continuously tracking and benchmarking performance of suppliers but also to make a tradeoff between tangible and intangible factors some of which may conflict. In this paper an integration of case-based reasoning (CBR), analytical network process (ANP) and linear programming (LP) is proposed to solve the supplier selection problem.

  10. Exploring determinants of perceived interfirm dependence in industrial supplier relations

    NARCIS (Netherlands)

    Noorderhaven, N.G.; Nooteboom, B.; Berger, H.

    1995-01-01

    Three groups of sources of supplier dependence are discussed in the literature: factors related to goal mediation, factors related to relation-specific assets, and factors related to network embeddedness. This paper explores the influence on the dependence of ego and alter, as perceived by the

  11. Improving Supplier Performance in New Product Development: The Role of Supplier Development

    OpenAIRE

    Potter, Antony; Lawson, Benn; Krause, Dan

    2015-01-01

    Suppliers play an increasingly central role in helping firms achieve their new product development (NPD) goals. Although much attention has focused on managing the buyer-supplier interface, we know little about how firms can enhance a supplier’s ability to contribute to an NPD effort. Thus, we propose a theoretical model that conceptualizes supplier development activities within inter-organizational NPD projects as bilateral knowledge-sharing processes. Antecedents (supplier responsibility,...

  12. Affecting the value chain through supplier kaizen.

    Science.gov (United States)

    Forman, C R; Vargas, D H

    1999-02-01

    In the aerospace industry, typically 60 percent of a product's cost and 70 percent of the lead time are due to purchased material. To affect price and customer responsiveness, improvement initiatives must be extended into the supply chain. Many companies have developed supply base management systems that include long-term agreements with suppliers, partnering with suppliers in risk taking and product design, information sharing, and quality and delivery rating systems. The premise is that suppliers are an extension of the factory. But to take full advantage of customer-supplier relationships, the suppliers must be "developed" in the same manner as a manufacturing unit. Supplier kaizen is a method of bringing suppliers to the same level of operations as the parent company, through training and improvement projects, to ensure superior performance and nurture the trust that is required for strong partnerships. This article describes Sikorsky Aircraft's use of kaizen to improve its supply base management.

  13. Supplier Selection Using Fuzzy Inference System

    Directory of Open Access Journals (Sweden)

    hamidreza kadhodazadeh

    2014-01-01

    Full Text Available Suppliers are one of the most vital parts of supply chain whose operation has significant indirect effect on customer satisfaction. Since customer's expectations from organization are different, organizations should consider different standards, respectively. There are many researches in this field using different standards and methods in recent years. The purpose of this study is to propose an approach for choosing a supplier in a food manufacturing company considering cost, quality, service, type of relationship and structure standards of the supplier organization. To evaluate supplier according to the above standards, the fuzzy inference system has been used. Input data of this system includes supplier's score in any standard that is achieved by AHP approach and the output is final score of each supplier. Finally, a supplier has been selected that although is not the best in price and quality, has achieved good score in all of the standards.

  14. Pressure or Pamper? The Effects of Power and Trust Dimensions on Supplier Resource Allocation

    NARCIS (Netherlands)

    Pulles, Niels Jaring; Veldman, Jasper; Schiele, Holger; Sierksma, Henk

    2014-01-01

    Leveraging the supply chain for competitive resources remains a key challenge for supply chain management. Drawing on social exchange theory, this study examines SCM practices that help firms to acquire better supplier resources than rival firms that source from the same supplier. We provide a

  15. Subcontractors and Component Suppliers in the Swedish Wind Power Industry

    International Nuclear Information System (INIS)

    Takeuchi, Linn

    2003-05-01

    This paper studies the Swedish component suppliers in the wind power industry. This group has not received much attention so far, and today very little is known. This study addresses the fact that the Swedish component suppliers have not been able to penetrate the wind power market despite the Swedish industry's strength in mechanical and electrical engineering. The aims of this paper were to gather information regarding the existing production and to identify factors that affect the Swedish component suppliers' scope to penetrate the wind turbine market. To date, although Sweden has spent considerable amounts of money on projects involving wind turbines, there is no series production of large wind turbines in Sweden. The historical development of the wind turbine industry suggests this alone would have inhibited the development of component production in Sweden. Yet, the country's proximity and good access to large wind turbine producing countries should be an advantage. Various factors and issues are identified and discussed in this paper that are relevant for the Swedish component suppliers' scope to penetrate the wind turbine market. These include market and product development, buyer-supplier relationships, export and sourcing behaviors, and time of market entry. This is a first step towards increasing the knowledge of Swedish component production and it is recognized that more studies are required. Various areas where relevant knowledge is largely missing or scarce are identified and discussed as well, and should serve as relevant starting points for continued research

  16. Subcontractors and Component Suppliers in the Swedish Wind Power Industry

    Energy Technology Data Exchange (ETDEWEB)

    Takeuchi, Linn

    2003-05-01

    This paper studies the Swedish component suppliers in the wind power industry. This group has not received much attention so far, and today very little is known. This study addresses the fact that the Swedish component suppliers have not been able to penetrate the wind power market despite the Swedish industry's strength in mechanical and electrical engineering. The aims of this paper were to gather information regarding the existing production and to identify factors that affect the Swedish component suppliers' scope to penetrate the wind turbine market. To date, although Sweden has spent considerable amounts of money on projects involving wind turbines, there is no series production of large wind turbines in Sweden. The historical development of the wind turbine industry suggests this alone would have inhibited the development of component production in Sweden. Yet, the country's proximity and good access to large wind turbine producing countries should be an advantage. Various factors and issues are identified and discussed in this paper that are relevant for the Swedish component suppliers' scope to penetrate the wind turbine market. These include market and product development, buyer-supplier relationships, export and sourcing behaviors, and time of market entry. This is a first step towards increasing the knowledge of Swedish component production and it is recognized that more studies are required. Various areas where relevant knowledge is largely missing or scarce are identified and discussed as well, and should serve as relevant starting points for continued research.

  17. Supplier selection problem: A state-of-the-art review

    Directory of Open Access Journals (Sweden)

    Nilesh R. Ware

    2012-08-01

    Full Text Available In the global competitiveness and growing market environment, “Actual competition is not between firms against firm, than supplier against supplier”. Globally in the fastest market development world gets closer and closer. Consumers prefer fast delivery, economical product, excellent service and high quality product with desired service level. For successful management of this supply chain, supplier considered as the base source for all processes. Therefore, an efficient supplier selection and evaluation process needs to be incorporate. The main purpose of this paper is to provide an extensive state-of-the-art literature review and critique of the studies related to various aspects of supplier selection problem over the past two decades. Research papers appearing in the reputed and leading international journals from 1991 to 2011 are gathered and analyzed. Primary focus is given on more than 200 published and unpublished works. It has been referred extensively to carry out state-of-the-art review for supplier selection problem. Finally, paper provides future perspective based on current research trends available in the published literature.

  18. Studying the emerging nuclear suppliers

    International Nuclear Information System (INIS)

    Rydell, R.F.

    1990-01-01

    None of these events---nor any of the many others that are cited in the case studies of this book---can be singled out as heralding a revolutionary transformation of the global nuclear marketplace. The cumulative effect of such developments, however, may well be the emergence of a market in the year 2000 that is far less concentrated than today's market for nuclear reactors and fuel cycle technology. If this gradual structural transformation is accompanied by the entry into the market of new buyers and sellers that do not accept the Nuclear Non-Proliferation Treaty (NPT), safeguards administered by the IAEA, or other international norms directed at preventing the spread of nuclear weapon capabilities, the result may indeed have revolutionary dimensions for the business, diplomacy, and research of nuclear energy. A similar outcome could arise even f these norms are widely accepted but are not matched by an increase in the resources available to national governments and key international agencies that implement these norms. This paper identifies some of the pitfalls that researchers often encounter in researching the emerging suppliers and will outline some basic ground rules to guide the collection and interpretation of empirical evidence on supplier behavior

  19. ATLAS Award for Shield Supplier

    CERN Multimedia

    2004-01-01

    ATLAS technical coordinator Dr. Marzio Nessi presents the ATLAS supplier award to Vojtech Novotny, Director General of Skoda Hute.On 3 November, the ATLAS experiment honoured one of its suppliers, Skoda Hute s.r.o., of Plzen, Czech Republic, for their work on the detector's forward shielding elements. These huge and very massive cylinders surround the beampipe at either end of the detector to block stray particles from interfering with the ATLAS's muon chambers. For the shields, Skoda Hute produced 10 cast iron pieces with a total weight of 780 tonnes at a cost of 1.4 million CHF. Although there are many iron foundries in the CERN member states, there are only a limited number that can produce castings of the necessary size: the large pieces range in weight from 59 to 89 tonnes and are up to 1.5 metres thick.The forward shielding was designed by the ATLAS Technical Coordination in close collaboration with the ATLAS groups from the Czech Technical University and Charles University in Prague. The Czech groups a...

  20. Matching to Openly Innovate with Suppliers

    DEFF Research Database (Denmark)

    Laursen, Linda Nhu

    2017-01-01

    heterogeneous suppliers with the internal organisation in order to openly innovate. More specifically, it focuses on a governance mode, recently emerged in practice, by which firms summon their suppliers and their own internal organisation at an event to match them for open innovation activities – innovation......When large firms choose to involve their many suppliers in open innovation, they are faced with a set of challenges pertaining to the governance of several suppliers. Suppliers are heterogeneous, offering heterogeneous materials, products, information, services, and knowledge, which are differently...... organized across functions and hierarchies. To make use of such heterogeneous resources, a critical challenge for open innovation is to pair a supplier resource with a suitable opportunity-for-use from within the firm – a challenge of matching. This dissertation addresses the challenge of matching...

  1. Supplier selection using different metric functions

    Directory of Open Access Journals (Sweden)

    Omosigho S.E.

    2015-01-01

    Full Text Available Supplier selection is an important component of supply chain management in today’s global competitive environment. Hence, the evaluation and selection of suppliers have received considerable attention in the literature. Many attributes of suppliers, other than cost, are considered in the evaluation and selection process. Therefore, the process of evaluation and selection of suppliers is a multi-criteria decision making process. The methodology adopted to solve the supplier selection problem is intuitionistic fuzzy TOPSIS (Technique for Order Preference by Similarity to the Ideal Solution. Generally, TOPSIS is based on the concept of minimum distance from the positive ideal solution and maximum distance from the negative ideal solution. We examine the deficiencies of using only one metric function in TOPSIS and propose the use of spherical metric function in addition to the commonly used metric functions. For empirical supplier selection problems, more than one metric function should be used.

  2. Supplier selection in the Malaysian telecommunications industry

    OpenAIRE

    Abdul Rahim, Suzari

    2013-01-01

    This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University. Supplier selection plays an important role in any organisation. This study investigates and examines supplier selection criteria and the impacts on buying firm performance; specifically focusing on the telecommunications industry in Malaysia. Previous studies in this area have focussed on the criteria such as quality, price, delivery, supplier relationship management and decision making tools...

  3. A Framework for Assessing and Managing Large Purchaser - Minority Supplier Relationships in Supplier Diversity Initiatives

    OpenAIRE

    Theodorakopoulos, Nicholas; Ram, Monder

    2008-01-01

    Supplier diversity initiatives can function as platforms for EMSs strategic learning (Theodorakopoulos et al., 2005; Theodorakopoulos & Ram, 2006) and the scant research in supplier diversity underscores the importance of relationship factors to the success of supplier diversity/development programmes (e.g. Pearson et al., 1993). However, purchaser-supplier relationship management as a vehicle for enhancing EMSs learning and supply capabilities has not been examined to any length within the c...

  4. Competitive and Cooperative Degree in Supply Chain: Supplier Selection between Competitors and Third-Party Suppliers

    OpenAIRE

    Xie, Bo; Wang, Xianjia; Zhou, Chuan

    2014-01-01

    Part 5: Modelling and Simulation; International audience; This work explores the firm’s supplier selection question that the competitor firm and the third-party supplier can supply the substitutable component. We consider a supply chain with two competing original equipment manufacturers (OEMs) and two third-party suppliers. The two OEMs produce the competing products which are comprised by two main components. Each OEM only can produce one component in-house and each third-party supplier onl...

  5. Does supplier evaluation impact process improvement?

    Directory of Open Access Journals (Sweden)

    Shiva Prasad h c

    2016-09-01

    Full Text Available Purpose: The research explores and examines factors for supplier evaluation and its impact on process improvement particularly aiming on a steel pipe manufacturing firm in Gujarat, India. Design/Methodology/approach: The conceptual research framework was developed and hypotheses were stated considering the analysis of literature and discussions with the managers and engineers of a steel pipe manufacturing company in Gujarat, India. Data was collected using in-depth interview. The questionnaire primarily involves the perception of evaluation of supplier. Factors influencing supplier evaluation and its influence on process improvement is also examined in this study. The model testing and validation was done using partial least square method. Outcomes signified that the factors that influence evaluation of the supplier are quality, cost, delivery and supplier relationship management. Findings: The study depicted that quality and cost factors for supplier evaluation are insignificant. The delivery and supplier relationship management have significant influence on evaluation of the supplier. The research also depicted that supplier evaluation has significant influence on process improvement. Research limitations/implications: The study has been made specifically for ABC steel pipe manufacturing industry in Gujarat, India and may not be appropriate to the other industries or any parts of the world. There is a possibility of response bias as the conclusions of this research was interpreted on survey responses taken from the employees of case study company, so it is suggested that future research can overcome this problem by employing various methodologies in addition to surveys like carrying out focus group and in-depth interviews, brainstorming sessions with the experts etc. Originality/value: Many researchers have considered quality, cost and delivery as the factors for evaluating the suppliers. But for a company it is quintessential to have good

  6. Supplier relationship- specific investments and the role of safeguards for supplier innovation sharing

    NARCIS (Netherlands)

    Bode, C.; Wagner, S.M.

    2014-01-01

    The vast majority of the supplier innovation literature has focused on how buying firms can effectively “pull” innovations from their suppliers. Yet, we know remarkably little about the factors that contribute to a supplier voluntarily “pushing” innovations to its customers. The present study

  7. A supplier selection using a hybrid grey based hierarchical clustering and artificial bee colony

    Directory of Open Access Journals (Sweden)

    Farshad Faezy Razi

    2014-06-01

    Full Text Available Selection of one or a combination of the most suitable potential providers and outsourcing problem is the most important strategies in logistics and supply chain management. In this paper, selection of an optimal combination of suppliers in inventory and supply chain management are studied and analyzed via multiple attribute decision making approach, data mining and evolutionary optimization algorithms. For supplier selection in supply chain, hierarchical clustering according to the studied indexes first clusters suppliers. Then, according to its cluster, each supplier is evaluated through Grey Relational Analysis. Then the combination of suppliers’ Pareto optimal rank and costs are obtained using Artificial Bee Colony meta-heuristic algorithm. A case study is conducted for a better description of a new algorithm to select a multiple source of suppliers.

  8. Accounting calculations problems with suppliers and contractors

    Directory of Open Access Journals (Sweden)

    Tikholaz I.A.

    2016-12-01

    Full Text Available in the article an order of accounting reflection of payments with suppliers and contractors are researched and ways of enhancement of accounting calculations process development with the purpose of management decisions optimization for their implementation are offered. Theoretical bases of intraeconomic control of settlings with suppliers and contractors are developed.

  9. A new Russell model for selecting suppliers

    NARCIS (Netherlands)

    Azadi, Majid; Shabani, Amir; Farzipoor Saen, Reza

    2014-01-01

    Recently, supply chain management (SCM) has been considered by many researchers. Supplier evaluation and selection plays a significant role in establishing an effective SCM. One of the techniques that can be used for selecting suppliers is data envelopment analysis (DEA). In some situations, to

  10. A review of multi-criteria decision making techniques for supplier evaluation and selection

    Directory of Open Access Journals (Sweden)

    Prince Agarwal

    2011-10-01

    Full Text Available Supplier evaluation and selection has been a vital issue of strategic importance for long time. Different multi-criteria decision making (MCDM approaches have been proposed by the researchers in past, to solve the supplier evaluation and selection problem. In this paper, we present a review of various MCDM methodologies reported in the literature for solving the supplier evaluation and selection process. The review is solely based on sixty-eight research articles, including eight review articles in the academic literature from 2000 to 2011. We try to find out the most prevalent approach in the articles and thereby present the future scope of arriving at an optimal solution to the problem, based on the specifications, the strategies and the requirements of the buyers. The study presents that with the change in processes and the requirements, how the approach of the manufacturing industry has shifted from striving for operational effectiveness to the strategic partnership in the dyadic relationship.

  11. Criteria definition and approaches in green supplier selection – a case study for raw material and packaging of food industry

    OpenAIRE

    Narges Banaeian; Hossein Mobli; Izabela Ewa Nielsen; Mahmoud Omid

    2015-01-01

    This paper formulates an integrated framework for deciding about the green supplier selection criteria in food supply chain and also proposes different methods that account for single and multiple sourcing of supplier selection. Green supplier selection relies on green criteria, so determination of suitable set of criteria will affect decision-maker results directly. In this research, an operational model including combination of general and environmental criteria is introduced for green supp...

  12. SOLE: enhanced FIA data analysis capabilities

    Science.gov (United States)

    Michael Spinney; Paul Van Deusen

    2009-01-01

    The Southern On Line Estimator (SOLE), is an Internet-based annual forest inventory and analysis (FIA) data analysis tool developed cooperatively by the National Council for Air and Stream Improvement and the Forest Service, U.S. Department of Agriculture's Forest Inventory and Analysis program at the Southern Research Station. Recent development of SOLE has...

  13. Ethical beliefs and information asymmetries in supplier relationships

    NARCIS (Netherlands)

    Martin, K.D.; Johnson, J.L.

    2010-01-01

    Heightened ethical concerns involving upstream suppliers (e.g., Peanut Corporation of America, dairy suppliers to Chinese infant formula manufacturers) have sparked interest in how managers' knowledge of suppliers' behavior influences decision making. This article explores the role of managers'

  14. Supplier selection problem: A fuzzy multicriteria approach

    African Journals Online (AJOL)

    kirstam

    simultaneously: maximising the total value of purchases, minimising ... Keywords: Supplier selection, multi-criteria decision-making, fuzzy logic, satisfaction ... includes both qualitative and quantitative factors, and it is necessary to make a.

  15. CMS rewards eight of its suppliers

    CERN Multimedia

    2002-01-01

    At the third awards ceremony to honour its top suppliers, the CMS collaboration presented awards to eight firms. Seven of them are involved in the manufacture of the magnet. The winners of the third CMS suppliers' awards visit the assembly site for the detector. Unsurprisingly, the CMS magnet was once again in the limelight at the third awards ceremony in honour of the collaboration's top suppliers. 'Unsurprisingly', because this magnet, which must produce an intense field of 4 Tesla inside an enormous volume (12 metres in diameter and 13 metres in length) is the detector's key component. As a result, many firms are involved in its construction. The CMS suppliers' awards are an annual event aimed at rewarding the exceptional efforts of certain companies. Firms are only eligible once they have delivered at least 50% of their supplies. This year, the collaboration honoured eight firms at a ceremony held on Monday 4 March in the main auditorium. Seven of th...

  16. Improved partnering through supplier self-evaluation

    International Nuclear Information System (INIS)

    Owens, R.K.; Cobb, J.R.

    1993-01-01

    Early in 1989, the Virginia Power purchasing department decided that a different approach was needed for resolving supplier partnering issues and to motivate the supplier to perform as promised to purchase order requirements. Purchasing formed task teams composed of purchasing personnel and requested that they investigate and evaluate alternative methods of order administration and supplier communications. The task teams were asked to research the feasibility of using a reward/penalty approach or to suggest an alternative method to motivate results. The task teams determined that the root cause of the problems for the identified areas of concern was that purchasing personnel and supplier personnel neither communicated well nor fully understood the effect that their actions or inactions had on each other

  17. Prospects for UK fuel cells component suppliers

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, C.; Tunnicliffe, M.

    2002-07-01

    This report examines the capabilities of the UK fuel cell industry in meeting the expected increase in demand, and aims to identify all UK suppliers of fuel cell components, evaluate their products and match them to fuel cell markets, and identify components where the UK is in a competitive position. Component areas are addressed along with the need to reduce costs and ensure efficient production. The well established supplier base in the UK is noted, and the car engine manufacturing base and fuel supply companies are considered. The different strengths of UK suppliers of the various types of fuel cells are listed. The future industry structure, the opportunities and dangers for business posed by fuel cells, the investment in cleaner technologies by the large fuel companies, opportunities for catalyst suppliers, and the residential combined heat and power and portable electronics battery markets are discussed.

  18. Allisonella histaminiformans gen. nov., sp. nov. A novel bacterium that produces histamine, utilizes histidine as its sole energy source, and could play a role in bovine and equine laminitis.

    Science.gov (United States)

    Garner, Matthew R; Flint, Joseph F; Russell, James B

    2002-12-01

    When cattle and horses are fed large amounts of grain, histamine can accumulate in the gastrointestinal tract, and this accumulation can cause an acute inflammation of the hooves (laminitis). When ruminal fluid from dairy cattle fed grain supplements was serially diluted in anaerobic MRS medium containing histidine (50 mM), histamine was detected at dilutions as high as 10(-7). The histidine enrichments were then transferred successively in an anaerobic, carbonate-based medium (50 mM histidine) without glucose. The histamine producing bacteria could not be isolated from the rumens of cattle fed hay; however, histamine producing bacteria could be isolated the feces of cattle fed grain and the cecum of a horse. All of the histamine producing isolates had the same ovoid morphology. The cells stained Gram-negative and were resistant to the ionophore, monensin (25 microM). The doubling time was 110 min, and the yield was 1.5 mg cell protein per mmol histidine. The G+C content was 46.8%. Lysine was the only other amino acid used, but lysine did not allow growth if histidine was absent. Because carbohydrate and organic acid utilization was not detected, it appeared that the isolates used histidine decarboxylation as their sole mechanism of energy derivation. 16s rRNA gene sequencing indicated that the isolates were most closely related to low G+C Gram-positive bacteria (firmicutes), but similarities were < or = 94%. Because the most closely related bacteria (Dialister pneumonsintes, Megasphaera elsdenii and Selenomonas ruminantium) did not produce histamine from histidine, we propose that these histamine producing bacteria be assigned to a new genus, Allisonella, as Allisonella histaminiformans gen. nov., sp. nov. The type strain is MR2 (ATCC BAA610, DSM 15230).

  19. New Approaches of Supplier Relationship Management

    OpenAIRE

    Cârstea Gheorghe; Pãun Oana; Pãun Sorin

    2014-01-01

    In a strong competitive environment, based on an increased degree of risk and uncertainty, supplier relationship management is considered to be a strategic value-adding process, able to contribute to the success of the organization. Supplier relationship management must also the development of a collaborative environment, based on trust between partners, so that both parties can achieve mutually beneficial objectives through joint effort and time investment.

  20. Routes towards supplier and production network internationalisation

    OpenAIRE

    A. CAMUFFO; FURLAN A; ROMANO P; VINELLI A

    2007-01-01

    Purpose – The purpose of this paper is to investigate routes towards supplier and production network internationalisation. Design/methodology/approach – Multiple case-study analysis has been applied to a sample of 11 Italian footwear and apparel companies with headquarters located in the North-east of Italy. Within and cross-case analyses illustrate and compare how these firms relocated one or more segments of their supplier and production networks to Romania. Findings – The...

  1. LHC suppliers win Golden Hadron awards

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    In a ceremony on 30 July, three of the 200 suppliers for the Large Hadron Collider (LHC) were presented with Golden Hadron awards. It is the third year that the awards have been presented to suppliers, not only for their technical and financial achievements but also for their compliance with contractual deadlines. This year the three companies are all involved in the supplies for the LHC's main magnet system.

  2. Sole risk and non-consent

    International Nuclear Information System (INIS)

    Winsor, Tom

    1994-01-01

    This article discusses the subjects of sole risk and non-consent in joint operation agreements as used by oil and gas joint ventures in the United Kingdom. The difference between these two concepts is examined in detail. (UK)

  3. From Governance to Supplier development

    DEFF Research Database (Denmark)

    Christensen, Ulla Normann

    Sustainable sourcing has been on the purchasing and supply chainmanagement research agenda for more than a decade and is among the mostpopular topics in the field today. Meanwhile, companies have developed arange of methods and tools for managing sustainable sourcing, which hasgrown...... to be an integrated part of purchasing strategy. Both in practice and inthe sustainable-sourcing literature, we still see examples of these methods notalways having the desired effect. In particular, we see that the most commonmethod of assessment-based sustainability-governance structure withgovernance mechanisms...

  4. Supplier Selection Using Weighted Utility Additive Method

    Science.gov (United States)

    Karande, Prasad; Chakraborty, Shankar

    2015-10-01

    Supplier selection is a multi-criteria decision-making (MCDM) problem which mainly involves evaluating a number of available suppliers according to a set of common criteria for choosing the best one to meet the organizational needs. For any manufacturing or service organization, selecting the right upstream suppliers is a key success factor that will significantly reduce purchasing cost, increase downstream customer satisfaction and improve competitive ability. The past researchers have attempted to solve the supplier selection problem employing different MCDM techniques which involve active participation of the decision makers in the decision-making process. This paper deals with the application of weighted utility additive (WUTA) method for solving supplier selection problems. The WUTA method, an extension of utility additive approach, is based on ordinal regression and consists of building a piece-wise linear additive decision model from a preference structure using linear programming (LP). It adopts preference disaggregation principle and addresses the decision-making activities through operational models which need implicit preferences in the form of a preorder of reference alternatives or a subset of these alternatives present in the process. The preferential preorder provided by the decision maker is used as a restriction of a LP problem, which has its own objective function, minimization of the sum of the errors associated with the ranking of each alternative. Based on a given reference ranking of alternatives, one or more additive utility functions are derived. Using these utility functions, the weighted utilities for individual criterion values are combined into an overall weighted utility for a given alternative. It is observed that WUTA method, having a sound mathematical background, can provide accurate ranking to the candidate suppliers and choose the best one to fulfill the organizational requirements. Two real time examples are illustrated to prove

  5. 47 CFR 68.320 - Supplier's Declaration of Conformity.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Supplier's Declaration of Conformity. 68.320... Approval § 68.320 Supplier's Declaration of Conformity. (a) Supplier's Declaration of Conformity is a... Supplier's Declaration of Conformity attaches to all items subsequently marketed by the responsible party...

  6. Building resilient relationships with suppliers in the B2B market

    Directory of Open Access Journals (Sweden)

    Wieteska Grażyna

    2016-12-01

    Full Text Available The growing uncertainty of business environment that negatively influences the contemporary supply chains is one of the major challenges for today’s managers. The literature recommends the development of resistant supply chains, defining them as adaptive and flexible. However, there are a few scientific publications that directly link to the area of Supplier Relationship Management in this regard. The article aims to answer the question what is the flexibility and adaptability and how to perceive these two characteristics in terms of an upstream supply chain. The observations indicate that building relationships resistant to these disruptions with suppliers includes the formulation of appropriate strategies towards both the suppliers and the purchasing process. Their choice depends on the source of uncertainty and the costs of switching the suppliers

  7. South Texas Maquiladora Suppliers Project.

    Science.gov (United States)

    Patrick, J. Michael

    This project was undertaken to assist South Texas industries in improving export to nearby Mexican maquiladoras (factories). The maquiladora program is based on co-production by two plants under a single management, one on each side of the border. Activities addressed four objectives: (1) to determine the dollar value, quantity, and source of the…

  8. Supplier selection an MCDA-based approach

    CERN Document Server

    Mukherjee, Krishnendu

    2017-01-01

    The purpose of this book is to present a comprehensive review of the latest research and development trends at the international level for modeling and optimization of the supplier selection process for different industrial sectors. It is targeted to serve two audiences: the MBA and PhD student interested in procurement, and the practitioner who wishes to gain a deeper understanding of procurement analysis with multi-criteria based decision tools to avoid upstream risks to get better supply chain visibility. The book is expected to serve as a ready reference for supplier selection criteria and various multi-criteria based supplier’s evaluation methods for forward, reverse and mass customized supply chain. This book encompasses several criteria, methods for supplier selection in a systematic way based on extensive literature review from 1998 to 2012. It provides several case studies and some useful links which can serve as a starting point for interested researchers. In the appendix several computer code wri...

  9. Emerging nuclear suppliers in the Third World

    International Nuclear Information System (INIS)

    Stahl, K.

    1990-01-01

    The emergence of new supplier states of nuclear technology within the Third World has raised concern, if those nuclear supplier states will promote an unrestricted and uncontrolled transfer of nuclear technology to developing countries and augment the risk of nuclear weapons proliferation. The article analyses the nuclear export capacities, nuclear exports and the export policy of Argentina, Brazil and India. Argentina is considered as the most important emerging nuclear supplier state in the Third World. Nuclear exports have to be authorisized by the government in all three states and will be covered by IAEA-safeguards in the recipient country. The three states will exercise restraint in the transfer of sensitive nuclear technology. Nuclear exports of Argentina, Brazil and India so far will not augment the danger of nuclear weapons proliferation. (orig./HSCH) [de

  10. Supplier Evaluation Process by Pairwise Comparisons

    Directory of Open Access Journals (Sweden)

    Arkadiusz Kawa

    2015-01-01

    Full Text Available We propose to assess suppliers by using consistency-driven pairwise comparisons for tangible and intangible criteria. The tangible criteria are simpler to compare (e.g., the price of a service is lower than that of another service with identical characteristics. Intangible criteria are more difficult to assess. The proposed model combines assessments of both types of criteria. The main contribution of this paper is the presentation of an extension framework for the selection of suppliers in a procurement process. The final weights are computed from relative pairwise comparisons. For the needs of the paper, surveys were conducted among Polish managers dealing with cooperation with suppliers in their enterprises. The Polish practice and restricted bidding are discussed, too.

  11. The emerging nuclear suppliers and nonproliferation

    International Nuclear Information System (INIS)

    Potter, W.C.

    1990-01-01

    The number of states capable of exporting nuclear material, technology, equipment, and services is large and growing. Once confined primarily to states party to the Nuclear Non-Proliferation Treaty (NPT), the list of actual and potential nuclear suppliers now includes many countries that do not subscribe to the NPT or to other international nuclear export control agreements. Although international control accords---such as the Nuclear Exporters' (Zangger) Committee and the London Nuclear Suppliers Group (NSG) guidelines---do not prohibit the export of sensitive nuclear materials and equipment, they do reduce the risks of proliferation by imposing international safeguards as a condition for export. The purpose of this book---the culmination of one phase of an ongoing international research project on the emerging nuclear suppliers and nonproliferation---is to remedy, at least in part, this data deficiency

  12. Biosynthesis of higher alcohol flavour compounds by the yeast Saccharomyces cerevisiae: impact of oxygen availability and responses to glucose pulse in minimal growth medium with leucine as sole nitrogen source.

    Science.gov (United States)

    Espinosa Vidal, Esteban; de Morais, Marcos Antonio; François, Jean Marie; de Billerbeck, Gustavo M

    2015-01-01

    Higher alcohol formation by yeast is of great interest in the field of fermented beverages. Among them, medium-chain alcohols impact greatly the final flavour profile of alcoholic beverages, even at low concentrations. It is widely accepted that amino acid metabolism in yeasts directly influences higher alcohol formation, especially the catabolism of aromatic and branched-chain amino acids. However, it is not clear how the availability of oxygen and glucose metabolism influence the final higher alcohol levels in fermented beverages. Here, using an industrial Brazilian cachaça strain of Saccharomyces cerevisiae, we investigated the effect of oxygen limitation and glucose pulse on the accumulation of higher alcohol compounds in batch cultures, with glucose (20 g/l) and leucine (9.8 g/l) as the carbon and nitrogen sources, respectively. Fermentative metabolites and CO2 /O2 balance were analysed in order to correlate the results with physiological data. Our results show that the accumulation of isoamyl alcohol by yeast is independent of oxygen availability in the medium, depending mainly on leucine, α-keto-acids and/or NADH pools. High-availability leucine experiments showed a novel and unexpected accumulation of isobutanol, active amyl alcohol and 2-phenylethanol, which could be attributed to de novo biosynthesis of valine, isoleucine and phenylalanine and subsequent outflow of these pathways. In carbon-exhausted conditions, our results also describe, for the first time, the metabolization of isoamyl alcohol, isobutanol, active amyl alcohol but not of 2-phenylethanol, by yeast strains in stationary phase, suggesting a role for these higher alcohols as carbon source for cell maintenance and/or redox homeostasis during this physiological phase. Copyright © 2014 John Wiley & Sons, Ltd.

  13. Gas suppliers meeting market opening

    International Nuclear Information System (INIS)

    Verberg, G.H.B.; Jaidah, N.K.; Eriksen, R.; Alvarez Pelegry, E.

    2003-01-01

    Natural gas, with its environmental advantages, will increase its development in the residential, professional and transportation markets. It will ensure the transition during the progressive implementation of more sustainable energy sources. This paper discusses some possible impacts of the deregulation on the future gas market (investments, risk management, competition, contracts). It is followed by a round table about the expectations of some gas producers (Qatar, Sweden) in front of the development of the European gas market (LNG projects, financing, contracts). (J.S.)

  14. Innovation During the Supplier Selection Process

    DEFF Research Database (Denmark)

    Pilkington, Alan; Pedraza, Isabel

    2014-01-01

    Established ideas on supplier selection have not moved much from the original premise of how to choose between bidders. Whilst we have added many different tools and refinements to choose between alternative suppliers, its nature has not evolved. We move the original selection process approach...... observed through an ethnographic embedded researcher study has refined the selection process and has two selection stages one for first supply covering tool/process developed and another later for resupply of mature parts. We report the details of the process, those involved, the criteria employed...... and identify benefits and weaknesses of this enhanced selection process....

  15. An Integrated Model for Supplier Selection for a High-Tech Manufacturer

    Science.gov (United States)

    Lee, Amy H. I.; Kang, He-Yau; Lin, Chun-Yu

    2011-11-01

    Global competitiveness has become the biggest concern of manufacturing companies, especially in high-tech industries. Improving competitive edges in an environment with rapidly changing technological innovations and dynamic customer needs is essential for a firm to survive and to acquire a decent profit. Thus, the introduction of successful new products is a source of new sales and profits and is a necessity in the intense competitive international market. After a product is developed, a firm needs the cooperation of upstream suppliers to provide satisfactory components and parts for manufacturing final products. Therefore, the selection of suitable suppliers has also become a very important decision. In this study, an analytical approach is proposed to select the most appropriate critical-part suppliers in order to maintain a high reliability of the supply chain. A fuzzy analytic network process (FANP) model, which incorporates the benefits, opportunities, costs and risks (BOCR) concept, is constructed to evaluate various aspects of suppliers. The proposed model is adopted in a TFT-LCD manufacturer in Taiwan in evaluating the expected performance of suppliers with respect to each important factor, and an overall ranking of the suppliers can be generated as a result.

  16. Project Management Consultancy (PMC) procurement approach: Supplier's evaluation and selection dilemma

    Science.gov (United States)

    Nawi, Mohd Nasrun Mohd; Azimi, Mohd Azrulfitri; Pozin, Mohd Affendi Ahmad; Osman, Wan Nadri; Anuar, Herman Shah

    2016-08-01

    Project Management Consultancy (PMC) is part of the management oriented procurement method in which a sole consultant is hired by the client to deal with the contactors in place of the client. Appointing contractors in this method or approach looks to be interesting as client could play a pivotal role in evaluating and selecting the supplier/contractor for the work package. In some cases, client gives the authority for the PMC to hire the supplier/contractor of their choice while in some cases the client is the one who made the decision. This research paper seeks to investigate the dilemma arises from this situation and for the purpose of this research, a real case study was studied to assess the impacts of such dilemma to the performance of the project. Recommendations on how to tackle the dilemma will also be addressed in the later part of this research paper.

  17. Supplier's sales engineer as a knowledge worker

    NARCIS (Netherlands)

    Kopecka, J.A.; Santema, S.C.; Hultink, H.J.

    2012-01-01

    The paper forms part of a multiple case study in progress that focuses on information relationships, i.e., the exchange of information and knowledge at the micro-social level between supplier and buyer firms in the fuzzy front end of product development. The micro-social level is made up of dyadic

  18. Advanced supplier partnership practices: a case study.

    Science.gov (United States)

    Williams, B R

    2000-05-01

    This article describes how a supplier partnership was set up to avoid the typical purchasing relationship--price being inversely proportional to quantity and having the purchaser take all the risk of product obsolescence. The case study also describes how rate-based replenishment replaced time-based delivery, and how all these advantages were achieved at reduced administrative costs.

  19. Outranking methods in support of supplier selection

    NARCIS (Netherlands)

    de Boer, L.; van der Wegen, Leonardus L.M.; Telgen, Jan

    1998-01-01

    Initial purchasing decisions such as make-or-buy decisions and supplier selection are decisions of strategic importance to companies. The nature of these decisions usually is complex and unstructured. Management Science techniques might be helpful tools for this kind of decision making problems. So

  20. Supplier-induced demand as strategic framing

    NARCIS (Netherlands)

    De Jaegher, K.J.M.

    2010-01-01

    This paper develops a model of supplier-induced demand as strategic framing where the patient has reference-dependent references, and the physician can persuade the patient to buy a treatment by affecting the patient’s reference point. In the main result, the patient is assumed to have a constant

  1. A review of methods supporting supplier selection

    NARCIS (Netherlands)

    de Boer, L.; Labro, Eva; Morlacchi, Pierangela

    2001-01-01

    this paper we present a review of decision methods reported in the literature for supporting the supplier selection process. The review is based on an extensive search in the academic literature. We position the contributions in a framework that takes the diversity of procurement situations in terms

  2. CMS and ATLAS honour their suppliers

    CERN Multimedia

    2001-01-01

    In order to motivate the hundreds of companies building their detectors, the CMS and ATLAS collaborations have recently been handing out awards of excellence to their top suppliers. At its second ceremony of this kind, CMS honoured four of its suppliers, while ATLAS for the first time paid tribute to two of its contractors. The atmosphere in the Council Chamber was festive rather than formal at the start of CMS week on Monday 5 March. Before embarking upon a long series of seminars and presentations, the Collaboration held its second awards ceremony to honour its top suppliers. By paying tribute to the exceptional efforts of certain suppliers, the Collaboration's aim is to motivate all the firms, some 500 in total, taking part in the experiment's construction. The CMS Awards panel thus singles out contractors who have not only provided full satisfaction in terms of compliance with specifications, quality and deadlines, but have in addition provided original solutions to delicate problems. Four firms came away...

  3. Evaluating the bases of supplier segmentation

    DEFF Research Database (Denmark)

    Day, Marc; Magnan, Gregory M.; Munkgaard Møller, Morten

    2010-01-01

    fragmentary in nature, current portfolio models are grouped into two principal taxonomic constructs of power and dependence and relational factors. In particular, the prevalent use of transaction cost economics (TCE) in portfolio modelling provides a foundation for purchasers to appraise risks from supplier...

  4. Supplier challenges in health tech innovation

    DEFF Research Database (Denmark)

    Rolfstam, Max

    Suppliers, in particular small innovative firms, is an important contributor not only for innovation in health-tech, but also a component to consider in the light of the emerging policy interest for using public procurement as a means to stimulate innovation. Research on barriers preventing...

  5. Benchmarking Supplier Development: An Empirical Case Study of Validating a Framework to Improve Buyer-Supplier Relationship

    Directory of Open Access Journals (Sweden)

    Shahzad Khuram

    2016-03-01

    Full Text Available In today’s dynamic business environment, firms are required to utilize efficiently and effectively all the useful resources to gain competitive advantage. Supplier development has evolved as an important strategic instrument to improve buyer supplier relationships. For that reason, this study focuses on providing the strategic significance of supplier development approaches to improve business relationships. By using qualitative research method, an integrated framework of supplier development and buyer-supplier relationship development has been tested and validated in a Finnish case company to provide empirical evidence. It particularly investigates how supplier development approaches can develop buyer-supplier relationships. The study present a set of propositions that identify significant supplier development approaches critical for the development of buyer-supplier relationships and develop a theoretical framework that specifies how these different supplier development approaches support in order to strengthen the relationships. The results are produced from an in-depth case study by implementing the proposed research framework. The findings reveal that supplier development strategies i.e., supplier incentives and direct involvements strongly effect in developing buyer-supplier relationships. Further research may focus on considering in-depth investigation of trust and communication factors along with propositions developed in the study to find out general applicability in dynamic business environment. Proposed integrated framework along with propositions is a unique combination of useful solutions for tactical and strategic management’s decision making and also valid for academic researchers to develop supplier development theories.

  6. Non-integrated electricity suppliers: the failure of an organisational model

    International Nuclear Information System (INIS)

    Boroumand, R.H.

    2009-01-01

    In the reference model of market liberalization, the reference business model is the pure electricity retailer. But bankruptcy, merger or vertical integration are indicative of the failure of this organizational model and its incapacity to manage efficiently the combination of sourcing and market risks in a setting of fierce price competition. Because of the structural dimension of electricity's volume risk, a supplier's level of risk exposure is unknown ex ante and will only be revealed ex post when consumption is known. Sourcing and selling portfolios of hedging contracts are incomplete risk management tools. Consequently, physical hedging is an essential complement to portfolios of contracts to overcome the pure supplier's curse. (author)

  7. Profiles of Major Suppliers to the Automotive Industry : Vol. 5. Multinational Automotive Parts and Components Suppliers

    Science.gov (United States)

    1982-08-01

    This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

  8. Profiles of Major Suppliers to the Automotive Industry : Vol. 6. Foreign Automotive Parts and Components Suppliers.

    Science.gov (United States)

    1982-08-01

    This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

  9. Factors Contributing to SMEs Failure in Meeting Supplier Performance Standards

    Directory of Open Access Journals (Sweden)

    van Scheers Louise

    2016-01-01

    Full Text Available This study sought to determine the factors that contribute to the failure of small and medium enterprises (SMEs in meeting supplier performance standards. Suppliers are faced with the challenge of SMEs failing to meet supplier performance standards because they rely on these providers of products and services, mainly SMEs, for their operations and to ultimately achieve their mandate. The researchers were able to establish the main factors contributing to SME failure in meeting supplier performance standards. These are as follows: unclear specifications and terms of references from suppliers; insufficient information provided to SME suppliers to ensure understanding of requirements; insufficient feedback and support; no support of SME suppliers based on their Black Economic Empowerment (BEE status; limited or no use of business support programs by SME suppliers; and external factors such as access to finance, changes in the economy, and location.

  10. Sandia National Laboratories: Working with Sandia: Current Suppliers

    Science.gov (United States)

    Defense Systems & Assessments About Defense Systems & Assessments Program Areas Accomplishments Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios Suppliers iSupplier Account Accounts Payable Contract Information Construction and Facilities Contract Audit

  11. Debunking Technical Competency as the Sole Source of Innovation

    Science.gov (United States)

    2015-01-01

    nations are losing control of businesses as they become more transnational through overseas direct investment. If Walmart were a country, it would...be China’s eighth largest trading partner.40 The Walmart example emphasizes the difficulty the United States would have in imposing restrictions

  12. Renewable energy sources - rational energy use. Enterprises - suppliers - research - consultation. BINE public information. Market leaders - addresses. Erneuerbare Energiequellen - rationelle Energieverwendung. Unternehmen - Bezugsquellen - Forschung - Beratung. BINE-Buergerinformation. Marktfuehrer-Adresshandbuch

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    The manual lists addresses and business information given by research institutes, companies, associations, groups, etc. in the field of renewable energy sources and rational energy use. It is to provide information, as comprehensive as possible to all those who have to solve problems concerning energy conservation and environmental protection. The manual is based on a detailed questionnaire distributed by BINE (Buerger-Information Neue Energietechniken, Nachwachsende Rohstoffe, Umwelt). (UA).

  13. 40 CFR 98.410 - Definition of the source category.

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Suppliers of Industrial Greenhouse Gases § 98.410 Definition of the source category. (a) The industrial gas supplier source category consists of any facility that...

  14. New environmental supplier selection criteria for circular supply chains

    DEFF Research Database (Denmark)

    Prosman, Ernst Johannes; Sacchi, Romain

    2017-01-01

    upon a consequential life cycle assessment and the monetized environmental impact of four alternative fuel suppliers in the cement industry. The best supplier performs three times better than the worst supplier in terms of environmental impact, thereby exemplifying the need for this study. The findings...

  15. Overview of nuclear export policies of major foreign supplier nations

    International Nuclear Information System (INIS)

    1977-01-01

    The United States faces increased competition from foreign nuclear suppliers, including West Germany, France, the United Kingdom, Canada, and possibly, in the near future, Japan. This general overview shows the differences and similarities in foreign nuclear supplier export requirements. It is based on summaries furnished by the Department of State covering the nuclear export policies and procedures of the major foreign supplier nations

  16. In Chains? Automotive Suppliers and Their Product Development Activities

    NARCIS (Netherlands)

    F. von Corswant; J.Y.F. Wynstra (Finn); M. Wetzels (Alex)

    2003-01-01

    textabstractA conceptual framework is developed and tested in which supplier downstream position in the supply chain, supplier innovation strategy and customer development commitment are seen as the antecedents of supplier product development activity. Using partial least squares (PLS), we analyze

  17. The global supplier - myth or reality?

    Energy Technology Data Exchange (ETDEWEB)

    Crawshaw, S A.M. [Long-Airdox Ltd., Ilkeston (United Kingdom)

    2002-02-01

    Coal remains a key feature of the world's energy and steel markets and coal mining is a global industry. Suppliers of equipment to the coal-mining industry have seen traditional markets almost disappear and new markets emerge. Suppliers need to work closely with customers, sometimes in remote areas developing long-term partnerships and continually improving the product to their mutual benefit. An attempt to explain how global changes to the underground coal industry have influenced the supply of coal-mining equipment is illustrated by recent developments in the Long-Airdox group. An example is given of how the group worked with the Cayirhan Mine in Turkey supplying cast armoured face conveyors for longwall mining. The paper was presented at a meeting of the Nottinghamshire Branch of the Institution of Mining and Metallurgy on 3 June 1998 in Nottinghamshire, UK. 1 fig.

  18. Gold awards for CERN's top suppliers!

    CERN Multimedia

    2003-01-01

    CERN's awards to the LHC project's best suppliers are now into their second year. Three companies received 'Golden Hadrons' for 2003. The Golden Hadron awards were presented to the delighted representatives of the winning firms by LHC Project Leader Lyn Evans on Friday 16 May. Only three out of the LHC's four hundred suppliers were lucky enough to receive a gold award. The consortium IHI (Japan)-Linde Kryotechnik (Switzerland), the Belgian company JDL Technologies and the Japanese firm Furukawa Electric Company were rewarded not only for their technical and financial achievements but also for their compliance with contractual deadlines. The 2003 Golden Hadron winners with Lyn Evans. From left to right: Armin Senn, Thomas Voigt, Kirkor Kurtcuoglu of LINDE KRYOTECHNIK ; Tadaaki Honda, Project Leader and Motoki Yoshinaga, Associate Director of IHI Corporation ; Lyn Evans, LHC Project Leader; Shinichiro Meguro, Managing Director of FURUKAWA ELECTRIC COMPANY ; Nobuyoshi Saji, Consulting Engineer of IHI Corporatio...

  19. Agglomeration in the European automobile supplier industry

    OpenAIRE

    Klier, Thomas; McMillen, Dan

    2013-01-01

    Motor vehicle and motor vehicle parts production plants tend to exhibit a strong degree of agglomeration. This paper estimates a spatial model utilizing detailed plant-level data that is pooled across seven countries in Europe. The paper makes several contributions. First, we assemble a set of nearly 1,800 European plant locations of the largest motor vehicle parts suppliers, as well as the location of all light vehicle assembly plants operational in 2010. Second, we obtain detailed spatial d...

  20. ATLAS honours one of its suppliers

    CERN Multimedia

    2003-01-01

    On 12 February the Netherlands firm Schelde Exotech was awarded a prize for best ATLAS supplier for the construction of the two vacuum chambers for the ATLAS endcap toroid magnets. The award for best supplier is handed over to representatives of the firm Schelde Exotech in front of one of the two vacuum chambers built by the firm. From left to right: E. Baynham (RAL), H. Geerink (NIKHEF), Y. Lefevere (NIKHEF), J. Engelen (NIKHEF), P. Jenni (CERN), E. Holtom (RAL), R. Boddaert (Schelde Exotech), G. Luijckx (NIKHEF), H. Klumpus (Schelde Exotech), M. Nessi (CERN), H. ten Kate (CERN), M. Nordberg (CERN), H. Hoffmann (CERN).This ceremony has now become something of a tradition. For the third consecutive year, ATLAS has given best supplier awards for the most exceptional contributors to the construction of the future detector. The Netherlands firm Schelde Exotech has just received the award for the construction of the two vacuum chambers for the ATLAS endcap toroid magnets. With a diameter of 11 metres and a volum...

  1. The LHC's suppliers come up trumps

    CERN Multimedia

    2006-01-01

    Four of the LHC Project's most exceptional suppliers have just been honoured in the fifth Golden Hadron awards ceremony. For the first time, a CERN team was among the prize-winners. The CERN main workshop (Mechanical and Materials Engineering group, TS/MME) received the Golden Hadron Award at the prize-giving ceremony held at the Globe. From left to right, Saïd Atieh (TS/MME), Vincent Vuillemin (TS/MME group leader), Michel Caccioppoli (TS/MME), Lyn Evans (LHC Project Leader), Marc Polini (TS/MME-MS section leader), Jean-Luc Gayraud (Cegelec), Jean-Paul Bacher (TS/MME-AS section leader) and Paolo Ciriani (head of the TS Department). Flexible, responsive, committed... all fitting adjectives to describe the recipients of the fifth Golden Hadron awards. The prizes, designed to honour the LHC Project's best suppliers, were awarded to a total of four suppliers, including two that are involved in the final accelerator assembly work: proof, if it were needed, that the project has now entered its final phase. Drak...

  2. Partners in quality: managing your suppliers.

    Science.gov (United States)

    Conway, B A

    1991-05-01

    Just expecting more from your supplier is not what partnership is about. We have had the experience where the quality improvement and partnership banner has been waved but the tone and spirit of the meeting did not encourage or support a joint quality improvement effort. Benefits will not be achieved until the wall truly begins to come apart and the relationship is built on mutual respect and trust. Data collection and open answers to questions often reveal embarrassing errors and obvious needs for improvements. As stated before, blame and finger-pointing must be replaced with a mutual commitment to asking and answering the question, "How can we improve?" As Dr. W. Edwards Deming has stated, "End the practice of awarding business on the basis of price tag. Instead, minimize total cost. Move toward a single supplier for any one item on a long-term relationship of loyalty and trust." The structured approach of a quality improvement process and the application of quality methods and techniques has proven useful in removing emotion and helping the team focus on the process rather than the people and the issues involved. Quality improvement methods are focused on achieving both customer and supplier goals--customer satisfaction, employee satisfaction, and operational efficiency and effectiveness. Our experience with Partners in Quality as well as our experience with the quality leadership process supports a recent quote in the Harvard Business Review: "Quality is not just a slogan...(it is) the most profitable way to run a business."

  3. Benchmarking Supplier Development: An Empirical Case Study of Validating a Framework to Improve Buyer-Supplier Relationship

    OpenAIRE

    Shahzad Khuram; Sillanpää Ilkka; Sillanpää Elina; Imeri Shpend

    2016-01-01

    In today’s dynamic business environment, firms are required to utilize efficiently and effectively all the useful resources to gain competitive advantage. Supplier development has evolved as an important strategic instrument to improve buyer supplier relationships. For that reason, this study focuses on providing the strategic significance of supplier development approaches to improve business relationships. By using qualitative research method, an integrated framework of supplier development...

  4. Antecedents and Outcomes of Supplier Innovativeness in International Customer-Supplier Relationships: The Role of Knowledge Distance

    OpenAIRE

    Jean, Ruey-Jer "Bryan"; Sinkovics, Rudolf R.; Kim, Daekwan

    2017-01-01

    The increasing competitive pressures and speed of R&D and product innovation is prompting many multinational enterprise customers to outsource their core activities to suppliers. Despite organizational challenges due to cultural and physical separation from their partners, these are now charged with supplier-driven innovation. This study looks at key drivers of supplier innovativeness, examines the role of cross-national differences in shaping supplier innovativeness and examines the impa...

  5. 42 CFR 424.57 - Special payment rules for items furnished by DMEPOS suppliers and issuance of DMEPOS supplier...

    Science.gov (United States)

    2010-10-01

    ..., telephone, computer, e-mail, instant messaging or in-person contact, by a DMEPOS supplier or its agents to a... communication records). (F) Is in a location that contains space for retaining the necessary ordering and... covers both the supplier's place of business and all customers and employees of the supplier. In the case...

  6. Spanish nuclear industry experience in the evaluation of suppliers

    International Nuclear Information System (INIS)

    Ramos Pellejero, J. L.; Martinez, J. A.; Gomez, R.; Pablos, C. de; Herrero, J.

    2012-01-01

    The paper aims to present the experiences identified by the Evaluation Panel Suppliers in fulfilling its role of supplier evaluation of goods and services s afety related . It belongs to UNESA and its main objective the evaluation of the quality system of the supplier against the basic rules applicable. With it you get two main benefits: - standardize evaluation criteria share experiences between suppliers and better management of own resources. - market access to all Spanish nuclear fleet by a single evaluation. From the experience gained, it can be concluded that there is a population of highly technically qualified suppliers to meet equipment requirements.

  7. Supplier Selection by Coupling-Attribute Combinatorial Analysis

    Directory of Open Access Journals (Sweden)

    Xinyu Sun

    2017-01-01

    Full Text Available Increasing reliance on outsourcing has made supplier selection a critical success factor for a supply chain/network. In addition to cost, the synergy among product components and supplier selection criteria should be considered holistically during the supplier selection process. This paper shows this synergy using coupled-attribute analysis. The key coupling attributes, including total cost, quality, delivery reliability, and delivery lead time of the final product, are identified and formulated. A max-max model is designed to assist the selection of the optional combination of suppliers. The results are compared with the individual supplier selection. Management insights are also discussed.

  8. Responsible purchasing: moving from compliance to value creation in supplier relationships

    NARCIS (Netherlands)

    van Weele, A.J.; van Tubergen, K.P.J.; Bouchery, Y.; Corbett, C.J.; Fransoo, J.C.; Tan, T.

    2017-01-01

    Nowadays, supply chain relationships represent an important risk factor to companies due to a cost-driven purchasing orientation. By relentlessly driving down cost in supply chain relationships, supplier relationships may suffer. In addition, through outsourcing and global sourcing, companies have

  9. The effects of inter-industry and country difference in supplier relationships on pioneering innovations

    DEFF Research Database (Denmark)

    Li, Ying; Vanhaverbeke, Wim

    2009-01-01

    Innovations are critical driving forces for firms to engage in corporate growth and new business development. Innovating firms are increasingly generating new knowledge in collaboration with partners. In this paper, we analyze how the knowledge differences between the innovating firms and their s...... external knowledge sources but also to find suppliers from the same or nearby countries for the sake of communication and coordination....

  10. Eliminating the "I hate you" in the supplier-purchasing relationship.

    Science.gov (United States)

    Nelson, M

    1996-05-01

    Throughout time there has always been a supplier of some service or goods, and there has always been a purchaser of that service or goods. The one thing that has remained constant throughout that time is that they have an agreement not to like each other. This article will approach the subject in the "today" sense using current practical approaches that are used in all industries and will not deal with the relationships of the future. To cover this complex arena, the article will deal with four areas: (1) where we are now, (2) supplier-based concentration, (3) single sourcing, and (4) transportation techniques.

  11. Evaluating supplier quality performance using analytical hierarchy process

    Science.gov (United States)

    Kalimuthu Rajoo, Shanmugam Sundram; Kasim, Maznah Mat; Ahmad, Nazihah

    2013-09-01

    This paper elaborates the importance of evaluating supplier quality performance to an organization. Supplier quality performance evaluation reflects the actual performance of the supplier exhibited at customer's end. It is critical in enabling the organization to determine the area of improvement and thereafter works with supplier to close the gaps. Success of the customer partly depends on supplier's quality performance. Key criteria as quality, cost, delivery, technology support and customer service are categorized as main factors in contributing to supplier's quality performance. 18 suppliers' who were manufacturing automotive application parts evaluated in year 2010 using weight point system. There were few suppliers with common rating which led to common ranking observed by few suppliers'. Analytical Hierarchy Process (AHP), a user friendly decision making tool for complex and multi criteria problems was used to evaluate the supplier's quality performance challenging the weight point system that was used for 18 suppliers'. The consistency ratio was checked for criteria and sub-criteria. Final results of AHP obtained with no overlap ratings, therefore yielded a better decision making methodology as compared to weight point rating system.

  12. Inherent variation in multiple shoe-sole test impressions.

    Science.gov (United States)

    Shor, Yaron; Wiesner, Sarena; Tsach, Tsadok; Gurel, Ron; Yekutieli, Yoram

    2018-04-01

    Shoeprints left at crime scenes are seldom perfect. Many prints are distorted or contaminated by various materials. Noisy background often contributes to vagueness on the shoeprints as well. Test impressions made from the suspect's shoes in the laboratory are considered a genuine replication of the shoe-sole. This naïve attitude is far from being correct. Consecutive test impressions made in the laboratory under strict similar conditions revealed differences among the exemplars of the same sole. Some of them are minor, but some are major, and can mislead the less experienced practitioners during the comparison process. This article focuses on the inherent within source variability between controlled shoeprints made from the same shoe, as it appears on the RACs. To describe and analyze this variability, repeated test impressions were prepared, and datasets were created. Several RACs were marked on each test impression, using an expert assisting software tool (developed in the authors' lab). The variance in repeated test impressions is demonstrated and possible sources are discussed. This variance should be considered when trying to establish the degree of matching between individual characteristics. Copyright © 2017. Published by Elsevier B.V.

  13. Supplier Assessment and Selection Using Fuzzy Analytic Hierarchy Process in a Steel Manufacturing Company

    OpenAIRE

    Tahriri, Farzad; Ale Ebrahim, Nader; Dabbagh, Mohammad

    2014-01-01

    Every organization needs suppliers and no organization can exist without suppliers. Therefore, the organizations approach to suppliers and the selection of the appropriate supplier, its acquisition processes and policies, and its relationships with suppliers, is of vital importance, both to organizations and suppliers alike. No organization can be successful without the support of its supplier base, operationally and strategically, short or long-term.To select the best supplier, it is essenti...

  14. Healthy versus Unhealthy Suppliers in Food Desert Neighborhoods: A Network Analysis of Corner Stores’ Food Supplier Networks

    Directory of Open Access Journals (Sweden)

    Yeeli Mui

    2015-11-01

    Full Text Available Background: Products in corner stores may be affected by the network of suppliers from which storeowners procure food and beverages. To date, this supplier network has not been well characterized. Methods: Using network analysis, we examined the connections between corner stores (n = 24 in food deserts of Baltimore City (MD, USA and their food/beverage suppliers (n = 42, to determine how different store and supplier characteristics correlated. Results: Food and beverage suppliers fell into two categories: Those providing primarily healthy foods/beverages (n = 15 in the healthy supplier network (HSN and those providing primarily unhealthy food/beverages (n = 41 in the unhealthy supplier network (UHSN. Corner store connections to suppliers in the UHSN were nearly two times greater (t = 5.23, p < 0.001, and key suppliers in the UHSN core were more diverse, compared to the HSN. The UHSN was significantly more cohesive and densely connected, with corner stores sharing a greater number of the same unhealthy suppliers, compared to HSN, which was less cohesive and sparsely connected (t = 5.82; p < 0.001. Compared to African Americans, Asian and Hispanic corner storeowners had on average −1.53 (p < 0.001 fewer connections to suppliers in the HSN (p < 0.001. Conclusions: Our findings indicate clear differences between corner stores’ HSN and UHSN. Addressing ethnic/cultural differences of storeowners may also be important to consider.

  15. Supplier-induced demand as strategic framing

    OpenAIRE

    De Jaegher, K.J.M.

    2010-01-01

    This paper develops a model of supplier-induced demand as strategic framing where the patient has reference-dependent references, and the physician can persuade the patient to buy a treatment by affecting the patient’s reference point. In the main result, the patient is assumed to have a constant rate of risk aversion (lovingness) in the gain (loss) region. Two scenarios are treated. In the cure scenario, the physician wants to frame the patient’s decision problem such that he prefers to buy ...

  16. 1997 Eleventh annual downstream suppliers directory

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    An indexed directory of equipment and service suppliers to the oil and gas industry was provided. The index, preceding the directory, provides an alphabetic listing of companies grouped by major products or services, such as blowers, compressors, control systems, hauling, maintenance, pipes, pumps, valves, welding supplies, and many others. The directory itself is arranged in a single alphabet. Each entry provides brief, but adequate information about the products or services offered, distributed or manufactured, plant location, telephone, fax, E-mail/Internet addresses, and names of key personnel

  17. Supplier integration for new product developments: antecedents for supplier integration in modular product designs

    NARCIS (Netherlands)

    Eggers, Justus Erich

    2016-01-01

    Original equipment manufacturers (OEMs) increasingly integrate supplier resources in new product developments (NPD) to overcome bottlenecks of resource and to create competitive advantages. At the same time, OEMs react to the new market challenges by implementing modular product designs. Despite the

  18. Winning the competition for supplier resources: The role of preferential resource allocation from suppliers

    NARCIS (Netherlands)

    Pulles, Niels Jaring; Veldman, Jasper; Schiele, Holger

    2016-01-01

    Purpose This paper examines the competition between buying firms for the supplier’s competitive resources. The purpose of this paper is to examine how indirect capabilities – the ability to access external resources – can help in obtaining preferential resource allocation from suppliers.

  19. ATLAS rewards two pixel detector suppliers

    CERN Multimedia

    2007-01-01

    Peter Jenni, ATLAS spokesperson, presented the ATLAS supplier award to Herbert Reichl, IZM director, and to Simonetta Di Gioia, from the SELEX company.Two of ATLAS’ suppliers were awarded prizes at a ceremony on Wednesday 13 June attended by representatives of the experiment’s management and of CERN. The prizes went to the Fraunhofer Institut für Zuverlässigkeit und Mikrointegration (IZM) in Berlin and the company SELEX Sistemi Integrati in Rome for the manufacture of modules for the ATLAS pixel detector. SELEX supplied 1500 of the modules for the tracker, while IZM produced a further 1300. The modules, each made up of 46080 channels, form the active part of the ATLAS pixel detector. IZM and SELEX received the awards for the excellent quality of their work: the average number of faulty channels per module was less than 2.10-3. They also stayed within budget and on schedule. The difficulty they faced was designing modules based on electronic components and sensor...

  20. Opportunities for suppliers in the North Sea

    International Nuclear Information System (INIS)

    D'Ancona, J.E.

    1992-01-01

    If European suppliers to the offshore industry are to prosper, it has to be on the basis of a single internationally competitive North Sea market. If we continue to talk and think in terms of a British sector, a Norwegian sector, Dutch and Danish sectors, then we will inhibit the full development of contractors and suppliers. The long term future in oilfield supplies lies in a mixed portfolio of international projects. Oil and gas exploration and development, particularly offshore, is notoriously cyclical. To survive the downturns in one market supply, companies need to have access to the upswing in others. The significance of a single North Sea market is that it presents an international arena for the best companies to demonstrate their technical and commercial abilities. Individual national sectors do not - cannot - provide that opportunity to anything like the same extent. Taking then the North Sea as a single competitive market, it represents the most important offshore area in the world at the present time, and this is likely to continue during the 1990s. The prospects of achieving a single North Sea market are discussed. (author)

  1. Sourcing Excellence

    DEFF Research Database (Denmark)

    Adeyemi, Oluseyi

    2011-01-01

    Sourcing Excellence is one of the key performance indicators (KPIs) in this world of ever changing sourcing strategies. Manufacturing companies need to access and diagnose the reliability and competencies of existing suppliers in order to coordinate and develop them. This would help in managing...

  2. Customer - Supplier Relationship and Knowledge Management: A Value Creation Process in SCM

    OpenAIRE

    Rock, Ruben; Robles Dobler, Cuauhtemoc

    2013-01-01

    The emergence of global markets has opened international sourcing opportunities for firms to seek for the best customer value derived from suppliers scattered around the globe. These new opportunities raise the importance of supply chain functions in the firm; not only it provides the materials to be transformed into a final product, it additionally performs a strategic function in the firm as a continuous source of competitive advantage. Supply chain literature puts great emphasis in value c...

  3. A Fuzzy MCDM Approach to Evaluate Green Suppliers

    Directory of Open Access Journals (Sweden)

    Gizem Cifci

    2011-10-01

    Full Text Available Nowadays the effect of industrial production on the environment brought out the importance of the green concept in supply chains. Particularly for supplier firms, greening is essential in a supply chain because with growing worldwide awareness of environmental protection, green production has become an important theme for almost every manufacturer. While literature related to supplier evaluation is plentiful, the works on green supplier evaluation are rather limited. Therefore, a green supplier evaluation model is proposed in this study. Due to its multi-criteria nature, the green supplier evaluation process requires an appropriate multi criteria analysis and solution approach. Selecting a proper method involves an insight analysis among available multi-criteria decision making (MCDM techniques. Among numerous methods of MCDM, this paper presents a decision framework based on group decision making (GDM and fuzzy analytic hierarchy process (FAHP for evaluating and selecting green suppliers. The applicability of the proposed approach is verified through a case study.

  4. Sustainable Supplier Performance Evaluation and Selection with Neofuzzy TOPSIS Method.

    Science.gov (United States)

    Chaharsooghi, S K; Ashrafi, Mehdi

    2014-01-01

    Supplier selection plays an important role in the supply chain management and traditional criteria such as price, quality, and flexibility are considered for supplier performance evaluation in researches. In recent years sustainability has received more attention in the supply chain management literature with triple bottom line (TBL) describing the sustainability in supply chain management with social, environmental, and economic initiatives. This paper explores sustainability in supply chain management and examines the problem of identifying a new model for supplier selection based on extended model of TBL approach in supply chain by presenting fuzzy multicriteria method. Linguistic values of experts' subjective preferences are expressed with fuzzy numbers and Neofuzzy TOPSIS is proposed for finding the best solution of supplier selection problem. Numerical results show that the proposed model is efficient for integrating sustainability in supplier selection problem. The importance of using complimentary aspects of sustainability and Neofuzzy TOPSIS concept in sustainable supplier selection process is shown with sensitivity analysis.

  5. Supplier Selection based on the Performance by using PROMETHEE Method

    Science.gov (United States)

    Sinaga, T. S.; Siregar, K.

    2017-03-01

    Generally, companies faced problem to identify vendors that can provide excellent service in availability raw material and on time delivery. The performance of suppliers in a company have to be monitored to ensure the availability to fulfill the company needs. This research is intended to explain how to assess suppliers to improve manufacturing performance. The criteria that considered in evaluating suppliers is criteria of Dickson. There are four main criteria which further split into seven sub-criteria, namely compliance with accuracy, consistency, on-time delivery, right quantity order, flexibility and negotiation, timely of order confirmation, and responsiveness. This research uses PROMETHEE methodology in assessing the supplier performances and obtaining a selected supplier as the best one that shown from the degree of alternative comparison preference between suppliers.

  6. Learning to Select Supplier Portfolios for Service Supply Chain.

    Science.gov (United States)

    Zhang, Rui; Li, Jingfei; Wu, Shaoyu; Meng, Dabin

    2016-01-01

    The research on service supply chain has attracted more and more focus from both academia and industrial community. In a service supply chain, the selection of supplier portfolio is an important and difficult problem due to the fact that a supplier portfolio may include multiple suppliers from a variety of fields. To address this problem, we propose a novel supplier portfolio selection method based on a well known machine learning approach, i.e., Ranking Neural Network (RankNet). In the proposed method, we regard the problem of supplier portfolio selection as a ranking problem, which integrates a large scale of decision making features into a ranking neural network. Extensive simulation experiments are conducted, which demonstrate the feasibility and effectiveness of the proposed method. The proposed supplier portfolio selection model can be applied in a real corporation easily in the future.

  7. Performance Measurement Model for the Supplier Selection Based on AHP

    Directory of Open Access Journals (Sweden)

    Fabio De Felice

    2015-10-01

    Full Text Available The performance of the supplier is a crucial factor for the success or failure of any company. Rational and effective decision making in terms of the supplier selection process can help the organization to optimize cost and quality functions. The nature of supplier selection processes is generally complex, especially when the company has a large variety of products and vendors. Over the years, several solutions and methods have emerged for addressing the supplier selection problem (SSP. Experience and studies have shown that there is no best way for evaluating and selecting a specific supplier process, but that it varies from one organization to another. The aim of this research is to demonstrate how a multiple attribute decision making approach can be effectively applied for the supplier selection process.

  8. 25 CFR 140.1 - Sole power to appoint.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Sole power to appoint. 140.1 Section 140.1 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FINANCIAL ACTIVITIES LICENSED INDIAN TRADERS § 140.1 Sole power to appoint. The Commissioner of Indian Affairs shall have the sole power and authority to...

  9. Supplier Relationship Management dalam Pendekatan Contigency dan Best Practice

    OpenAIRE

    Supriharyanti, Elisabeth

    2005-01-01

    The supplier relationship is one important type of cooperation between and among firms. Supplier relationship management (SRM) is a part of the overall supply chain management process. Over the past several years, there has been significant shift in the way organization approach supplier relationship management. Recent year have seen an increased interest and involvement in partnership model. Several authors said that partnersip will deliver superior performance. The “best practice” model of ...

  10. An Integrated DEMATEL-QFD Model for Medical Supplier Selection

    OpenAIRE

    Mehtap Dursun; Zeynep Şener

    2014-01-01

    Supplier selection is considered as one of the most critical issues encountered by operations and purchasing managers to sharpen the company’s competitive advantage. In this paper, a novel fuzzy multi-criteria group decision making approach integrating quality function deployment (QFD) and decision making trial and evaluation laboratory (DEMATEL) method is proposed for supplier selection. The proposed methodology enables to consider the impacts of inner dependence among supplier assessment cr...

  11. Boosting INPO's programs with supplier know-how

    International Nuclear Information System (INIS)

    Matson, B.

    1984-01-01

    Nuclear industry suppliers, such as Stone and Webster and Babcock and Wilcox, are key participants in the Institute of Nuclear Power Operators (INPO) effort to promote technical information exchanges throughout the industry and to contribute to INPO training programs. Suppliers have 21 employees on loan to the Institute, although steps must be taken to protect proprietary information and to avoid breaking antitrust laws. Among the NUCLEAR NETWORK programs using supplier expertise is the Significant Event Evaluation and Information Network (SEE-IN), which reviews important reports involving their products. Suppliers benefit by observing evaluation teams at construction sites and plant start-ups

  12. The emerging nuclear suppliers: some guidelines for policy (U)

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, Lewis A.

    1988-04-01

    Lewis A. Dunn, a former Assistant Director of the US Arms Control and Disarmament Agency and now a senior analyst with Science Applications International Corporation, looks to the future to offer "The Emerging Nuclear Suppliers: Some Guidelines for Policy ." Mr. Dunn notes that although most emerging suppliers are cautious, many are not party to existing nonproliferation treaties. He calls upon the nonproliferation community to continue the present policy of not supporting unsafeguarded nuclear activities. He suggests that the nonproliferation community work within existing standards and infrastructures of nuclear suppliers to convince emerging supplier nations of the merits of nuclear export control.

  13. Multiattribute Supplier Selection Using Fuzzy Analytic Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Serhat Aydin

    2010-11-01

    Full Text Available Supplier selection is a multiattribute decision making (MADM problem which contains both qualitative and quantitative factors. Supplier selection has vital importance for most companies. The aim of this paper is to provide an AHP based analytical tool for decision support enabling an effective multicriteria supplier selection process in an air conditioner seller firm under fuzziness. In this article, the Analytic Hierarchy Process (AHP under fuzziness is employed for its permissiveness to use an evaluation scale including linguistic expressions, crisp numerical values, fuzzy numbers and range numerical values. This scale provides a more flexible evaluation compared with the other fuzzy AHP methods. In this study, the modified AHP was used in supplier selection in an air conditioner firm. Three experts evaluated the suppliers according to the proposed model and the most appropriate supplier was selected. The proposed model enables decision makers select the best supplier among supplier firms effectively. We confirm that the modified fuzzy AHP is appropriate for group decision making in supplier selection problems.

  14. 75 FR 31321 - Fisheries of the Exclusive Economic Zone Off Alaska; Rock Sole, Flathead Sole, and “Other...

    Science.gov (United States)

    2010-06-03

    .... 0910131363-0087-02] RIN 0648-XW74 Fisheries of the Exclusive Economic Zone Off Alaska; Rock Sole, Flathead... participating in the Amendment 80 limited access fishery in the Bering Sea and Aleutian Islands management area... the trawl rock sole, flathead sole, and ``other flatfish'' fishery category by vessels participating...

  15. Supplier responsibility for nuclear material quality

    International Nuclear Information System (INIS)

    Stuart, P.S.; Dohna, A.E.

    1976-01-01

    Nuclear materials must be delivered by either the manufacturer or the distributor with objective, documented evidence that the material was manufactured, inspected, and tested by proven techniques performed by qualified personnel working to documented procedures. Measurement devices used for acceptance must be of proven accuracy. The material and all records must be identified for positive traceability as part of the quality history of the nuclear components, system, or structure in which the material was used. In conclusion, the nuclear material supplier must join the fabricator, the installer, and the user in effective implementation of the total systems approach to the application of quality assurance principles to all phases of procurement, fabrication, installation, and use of the safety-related components, systems, and structures in a nuclear power plant

  16. Interpersonal attraction in buyer–supplier relationships

    DEFF Research Database (Denmark)

    Ellegaard, Chris

    2012-01-01

    The concept of attraction is not reserved for the study of interpersonal relationships between husband and wife, family members, or lifelong friends. On the contrary, it contains much potential as a variable describing interpersonal business exchange relationships. This potential has been noted...... by well-known industrial marketing scholars in the past, and recent theoretical advances have incorporated attraction to describe buyer– supplier exchange, although primarily at the interorganizational level of analysis. The in-depth understanding of interpersonal attraction between boundary spanners...... representing buying and supply companies has yet to be developed. By drawing on social psychology and social exchange literature, this paper attempts to fill some of this gap. It contributes by uncovering the elements and process of interpersonal attraction. Furthermore, propositions are formulated to guide...

  17. The uranium market: implications for suppliers

    International Nuclear Information System (INIS)

    Clark, R.G.

    1988-01-01

    This paper describes current factors important to suppliers operating in the natural uranium market-place and attempts to look forward in time to identify what factors will either remain or develop to complicate the lives of producers. In the absence of effective import restrictions in the United States, the market-place will continue to be a buyers' one for at least a few years, but some of the factors causing this situation will ease with the passage of time, or perhaps more correctly with the generation of more electricity from nuclear power plants. To survive over the next several years, a producer will need not only favourable production costs but also an intelligent approach to the marketing of his product. (author)

  18. SUPPLIER EVALUATION AND SELECTION: CASE OF AN AUTOMOTIVE SPARE-PARTS SUPPLIER

    OpenAIRE

    Oflac, Bengu Sevil

    2015-01-01

     The main aim of this study is to conduct a current state analysis for a leading original and spare parts producer operating in automobile industry. In the focused company, due to having some problems about purchasing process, there was a need for reviewing and restructuring supplier evaluation mechanism. In this perspective, based on the results of qualitative techniques conducted, reasons for poor evaluation systems were found. As a contribution to practice, in line with the needs of compan...

  19. ADAPTING BUYER-SUPPLIER RELATIONSHIP PRACTICES IN THE LOCAL INDUSTRY

    Directory of Open Access Journals (Sweden)

    Latifah Che Amad

    2008-01-01

    Full Text Available This study examines the types and extent of supplier development activities undertaken by an identified manufacturing firm, along with the importance of supplier development goals. Data was collected through a cross-sectional survey of 26 respondents, consisting of officers, engineers, managers and senior managers from various sections within the buying firm's organisation. The analysis is based primarily on descriptive statistics. The results reveal that the supplier-specific factors are more prominent predictors of the outcomes of the supplier development efforts as compared to the other factors. The manufacturer's focus on the supplier development programme appears to be a short-term, results-oriented approach involving limited or no significant efforts on the side of thebuying firm. There is evidence indicating that the manufacturer has not fully utilised the expertise of its suppliers in designing its products, since there is lack of supplier involvement in the early stages of the design and development activities. The overallresults point to numerous deficiencies in the supplier development programme. Practical implications are provided in light of the findings.

  20. The wicked problems of supplier-driven innovation

    DEFF Research Database (Denmark)

    Christensen, Poul Rind; Munksgaard, Kristin Balslev; Bang, Anne Louise

    2017-01-01

    Suppliers stand in the wake of a new diversified strategic momentum in the global production network, where innovation is growing in importance. The term “supplier-driven innovation” is coined in contrast to the current hype on user-driven innovation; this paper aims to discuss the wicked problems...

  1. Airbus’s Supplier Portal: changing a business paradigm

    NARCIS (Netherlands)

    E.M. van Raaij (Erik); J.C.M. van den Ende (Jan); D. Baumann (Dominic)

    2015-01-01

    textabstractWith procurement volume determining 75 to 80 per cent of costs, Airbus heavily depends on its 1,000 or more key suppliers. As a solution to the complexity of its supply chain, it introduced a portal to serve as an electronic marketplace for all interactions with its suppliers. Five years

  2. Gaining insight into the effects : the supplier perspective

    NARCIS (Netherlands)

    Michiel Steeman; Christiaan de Goeij; Paulien de Graaf-Muller

    2016-01-01

    In this paper we discuss what suppliers can do to get insight into the effects of Reverse Factoring (RF), currently the most used form of Supply Chain Finance (SCF). Even though the usage of RF is increasing, empirical evidence is scarce, especially from the point of view of suppliers.

  3. Preferential customer treatment by suppliers : identifying benefits and antecedents

    NARCIS (Netherlands)

    Huttinger, Lisa

    2014-01-01

    Due to an increased competitive condition in high-skilled supply markets, buying firms increasingly find themselves competing with their rivals for the best suppliers available in a certain field. Due to the scarcity of such suppliers, the latter may not dedicate their resources equally to all

  4. Priority issues affecting operators' and suppliers' liens: the Alberta perspective

    International Nuclear Information System (INIS)

    Corbett, W.T.

    1996-01-01

    Selected aspects of priority issues in contractual obligations in the petroleum industry were discussed, focusing on the priority issues claimed by suppliers and operators with respect to Alberta properties. Discussions touched upon suppliers' lien rights in Alberta, operators' set-off rights, and on some of the priority issues involving operators' liens

  5. Customer retention through supplier-organization-customer relationship management

    OpenAIRE

    Žvirelienė, Renata; Bučiūnienė, Ilona; Škudienė, Vida; Sakalas, Algimantas

    2009-01-01

    The research objective was to assess the relationship marketing outputs' (internal relationship, relationship with customer, relationship with supplier) interrelationship and their relationship with customers' retention. The internal and external relationship dimensions of commitment, satisfaction, trust, communication, cooperation and empathy were used to measure supplier-organization-customer relationship strength. The survey was conducted in cargo vehicles trading industry companies in Lit...

  6. ABOUT INDEX EVALUATION OF MATERIAL RESOURCE SUPPLIER SELECTION

    OpenAIRE

    V. A. Skochinskaya

    2008-01-01

    The paper analyzes existing methods for evaluation of material resource supplier selection. It shows advantages and shortcomings of the present evaluation systems. The necessity for application of an index evaluation is justified in the paper. The paper contains rating (index) evaluation for material resource supplier selection which is based on the application of quantitative (index) tool instead of an expert (numerical) evaluation. 

  7. Priority issues affecting operators' and suppliers' liens: the Saskatchewan perspective

    International Nuclear Information System (INIS)

    Milani, M.W.

    1996-01-01

    Priority issues in contractual obligations in the petroleum industry were discussed from the perspective of Saskatchewan. In Saskatchewan, the priority issues relative to builders' and suppliers' liens are similar to those of Alberta, but there are some subtle differences, which were addressed. Priority issues claimed by suppliers and operators with respect to Saskatchewan properties were given special attention

  8. An integrated MCDM approach to green supplier selection

    Directory of Open Access Journals (Sweden)

    Morteza Yazdani

    2014-06-01

    Full Text Available Supplier selection management has been considered as an important subject for industrial organizations. In order to remain on the market, to gain profitability and to retain competitive advantage, business units need to establish an integrated and structured supplier selection system. In addition, environmental protection problems have been big solicitudes for organizations to consider green approach in supplier selection problem. However, finding proper suppliers involves several variables and it is critically a complex process. In this paper, the main attention is focused on finding the right supplier based on fuzzy multi criteria decision making (MCDM process. The weights of criteria are calculated by analytical hierarchical process (AHP and the final ranking is achieved by fuzzy technique for order preference by similarity to an ideal solution (TOPSIS. TOPSIS advantage among the other similar methods is to obtain the best solution close to ideal solution. The paper attempts to express better understanding by an example of an automobile manufacturing supply chain.

  9. A SUPPLIER SELECTION MODEL FOR SOFTWARE DEVELOPMENT OUTSOURCING

    Directory of Open Access Journals (Sweden)

    Hancu Lucian-Viorel

    2010-12-01

    Full Text Available This paper presents a multi-criteria decision making model used for supplier selection for software development outsourcing on e-marketplaces. This model can be used in auctions. The supplier selection process becomes complex and difficult on last twenty years since the Internet plays an important role in business management. Companies have to concentrate their efforts on their core activities and the others activities should be realized by outsourcing. They can achieve significant cost reduction by using e-marketplaces in their purchase process and by using decision support systems on supplier selection. In the literature were proposed many approaches for supplier evaluation and selection process. The performance of potential suppliers is evaluated using multi criteria decision making methods rather than considering a single factor cost.

  10. Supplier Development Literature Review and Key Future Research Areas

    Directory of Open Access Journals (Sweden)

    Muddassir Ahmed

    2012-10-01

    Full Text Available The purpose of this paper is to develop a Supplier Development (SD literature framework and identify the main focus areas in SD research. To this end, a comprehensive review of the existing SD academic literature has been undertaken, which includes 62 research papers. These papers are classified according to their research content and the research methodology employed. A comprehensive list of future research areas is also presented. Thus, this paper will also briefly explore proposed future research. The review of the SD literature presented here identifies the following main areas of focus: Supplier Development Activities, Practices and Success Factors; Direct or Indirect Supplier Development; Supplier Development as a Reactive or Strategic Process; Supplier Development in a Lean Six Sigma & SME context.

  11. Consequences of information technology usage on retailer-supplier relations

    DEFF Research Database (Denmark)

    Esbjerg, Lars

    1. Retailers and suppliers increasingly tend to form long-term co-operative relationships. In the literature, the use of information technology is an enabling factor behind this trend. Nevertheless, our understanding of how information technology influences retailer-supplier relationships is still...... limited. The purpose of this paper therefore is to study the consequences of information technology usage on retailer supplier relationships, focusing on inter-organisational systems. 2. The paper begins by discussing the nature of retailer-supplier relations, noting that whereas these relationships have...... traditionally been adversarial, retailers and suppliers are beginning to realise that they can benefit from co-operating. Further, developmental processes in co-operative inter-organisational relations are discussed and the important role of social exchange in inter-organisational relationships is stressed. 3...

  12. Cooperative Evolutionary Game and Applications in Construction Supplier Tendency

    Directory of Open Access Journals (Sweden)

    Qianqian Shi

    2018-01-01

    Full Text Available Major construction projects have a great influence on the national economy and society, wherein cooperative relationship between construction suppliers plays an increasingly significant role in the overall supply chain system. However, the relationships between suppliers are noncontractual, multistage, dynamic, and complicated. To gain a deeper insight into the suppliers’ cooperative relationships, an evolutionary game model is developed to explore the cooperation tendency of multisuppliers. A replicator dynamic system is further formulated to investigate the evolutionary stable strategies of multisuppliers. Then, fourteen “when-then” type scenarios are concluded and classified into six different evolutionary tracks. Meanwhile, the critical influencing factors are identified. The results show that the suppliers’ production capacity, owner-supplier contract, and the owner’s incentive mechanism influence the cooperation tendency of suppliers directly. The managerial implications contribute to insightful references for a more stable cooperative relationship between the owner and suppliers.

  13. Would you procure radioactive containers without a supplier quality evaluation?

    Energy Technology Data Exchange (ETDEWEB)

    Hawk, M. [Oak Ridge National Lab., TN (United States); Kapoor, A.; Natali, R.B.

    2004-07-01

    U.S. Department of Energy (DOE) sites/contractors purchase several different types of containers (such as boxes, drums, large bulk dump trucks, railcars, cargo containers, burrito wraps, and super sacks) for use in the storage and transportation of low-level waste. These containers are purchased from several suppliers - all of whom must be pre-approved according to DOE rules, orders and guidelines - and the suppliers must manufacture the containers to exact specifications and designs supplied by the DOE site/contractor. DOE studies and qualitative evaluations indicate that the current supplier evaluation process is too costly and inefficient. Therefore, DOE, in coordination with sites/contractors, instituted a corporate approach to centralize the supplier quality evaluation program for the procurement of containers. That effort resulted in the development of this Container Suppler Evaluation Program. The program was implemented when two suppliers were evaluated using this program.

  14. Would you procure radioactive containers without a supplier quality evaluation?

    International Nuclear Information System (INIS)

    Hawk, M.; Kapoor, A.; Natali, R.B.

    2004-01-01

    U.S. Department of Energy (DOE) sites/contractors purchase several different types of containers (such as boxes, drums, large bulk dump trucks, railcars, cargo containers, burrito wraps, and super sacks) for use in the storage and transportation of low-level waste. These containers are purchased from several suppliers - all of whom must be pre-approved according to DOE rules, orders and guidelines - and the suppliers must manufacture the containers to exact specifications and designs supplied by the DOE site/contractor. DOE studies and qualitative evaluations indicate that the current supplier evaluation process is too costly and inefficient. Therefore, DOE, in coordination with sites/contractors, instituted a corporate approach to centralize the supplier quality evaluation program for the procurement of containers. That effort resulted in the development of this Container Suppler Evaluation Program. The program was implemented when two suppliers were evaluated using this program

  15. A new DEA-GAHP method for supplier selection problem

    Directory of Open Access Journals (Sweden)

    Behrooz Ahadian

    2012-10-01

    Full Text Available Supplier selection is one of the most important decisions made in supply chain management. Supplier evaluation problem has been in the center of supply chain researcher’s attention in these years. Managers regard some of these studies and methods inappropriate due to simple, weight scoring methods that generally are based on subjective opinions and judgments of decision maker units involved in the supplier evaluation process yielding imprecise and even unreliable results. This paper seeks to propose a methodology to integrate data envelopment analysis (DEA and group analytical hierarchy process (GAHP for evaluating and selecting the most efficient supplier. We develop a methodology, which consists of 6 steps, one by one has been introduced in lecture and finally applicability of proposed method is indicated by assessing 12 suppliers in a numerical example.

  16. Low Carbon Supplier Selection in the Hotel Industry

    Directory of Open Access Journals (Sweden)

    Chia-Wei Hsu

    2014-05-01

    Full Text Available This study presents a model for evaluating the carbon and energy management performance of suppliers by using multiple-criteria decision-making (MCDM. By conducting a literature review and gathering expert opinions, 10 criteria on carbon and energy performance were identified to evaluate low carbon suppliers using the Fuzzy Delphi Method (FDM. Subsequently, the decision-making trial and evaluation laboratory (DEMATEL method was used to determine the importance of evaluation criteria in selecting suppliers and the causal relationships between them. The DEMATEL-based analytic network process (DANP and VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR were adopted to evaluate the weights and performances of suppliers and to obtain a solution under each evaluation criterion. An illustrative example of a hotel company was presented to demonstrate how to select a low carbon supplier according to carbon and energy management. The proposed hybrid model can help firms become effective in facilitating low carbon supply chains in hotels.

  17. Sole Mothers in Australia: Supporting Mothers to Seek Work

    OpenAIRE

    Marilyn McHugh; Jane Millar

    1996-01-01

    The rapid increase in the numbers of sole parents in Australia - and their high risk of poverty - has meant that these families have become a focus of increasing concern. This paper explores the issue of sole motherhood and employment, with a particular emphasis on examining the relationship between social security policies and current discourses on the role of women in Australian society, including the perspectives of sole mothers themselves. The paper is part of an edited collection (Duncan...

  18. Tax Policy and Sole Proprietorships: A Closer Look

    OpenAIRE

    Nelson, Susan C.

    2008-01-01

    The 21 million sole proprietorship returns filed in 2005 represent a wide variety of economic activity. This paper examines three major tax policy issues related to sole proprietorships—taxpayer compliance, taxpayer burden, and incentives for growth. It uses tax return data to take a closer look at sole proprietorships. It proposes a new taxonomy for describing these returns in an economically meaningful way, based on the principal factors of production that they use: their own labor, hired l...

  19. Buyer-Supplier Relationships and Power Position: Interchaining

    Directory of Open Access Journals (Sweden)

    Hebatollah Morsy

    2017-02-01

    Full Text Available According to several studies, power and interdependence play a considerable role in understanding the buyer–supplier relationships, yet, empirical research is still limited. Also, the nature of the buyer-supplier relationship and managing them might vary based on the power position of buyers and suppliers. Few studies focused on the reason behind this interrelation and strong influence of power on the buyer-supplier relationships. Thus, the purpose of this study is to gain better understanding and try to identify how power position and buyer-supplier relationships are interrelated, and whether there are common determinants and/or characteristics behind this strong bond between the two concepts. Both transaction cost analysis theory and social exchange theory were integrated in building the argument. Regarding the methodology, qualitative exploratory research design was employed by using multiple-case study as the main research method, where three multinational Egyptian organizations were selected. Moreover, data was collected using individual in-depth interviews, and analyzed through coding and cross case analysis techniques. The results showed that there are common factors that influence both buyer-supplier relationship characteristics and power position attributes. And according, the findings helped in pointing out a new lens of discussing and investigating the bond between buyer-supplier relationships ad power in research.

  20. The effects of balanced and asymmetric dependence on supplier satisfaction : Identifying positive effects of dependency

    NARCIS (Netherlands)

    Caniëls, Marjolein C.J.; Vos, Frederik G.S.; Schiele, Holger; Pulles, Niels J.

    2017-01-01

    Studies argue that balance in dependence is critical to supplier satisfaction in buyer-supplier relationships. We examine whether asymmetric relationships can also lead to supplier satisfaction, arguing that traditional analysis methods are unsuitable for thoroughly analyzing this issue. With

  1. Critical elements of supplier development in the Malaysian automobile industry : Parts and components procurement and supplier development Practice at Proton【Article】

    OpenAIRE

    Abdullah, Rashid; Maharjan, Keshav Lall

    2003-01-01

    Supplier development is defined as any effort of a buying firm with regard to its supplier to increasethe performance and/or capabilities of the supplier to meet the buying firm's supply needs. The procure-ment practice of the buyer is critical and acts as a window to nurture the supplier development effort, itis also crucial in determining the type of relationship that the company has with its suppliers. This paperexamines the procurement practice at PROTON for parts and component inputs at ...

  2. Japanese suppliers in transition from domestic nuclear reactor vendors to international suppliers

    International Nuclear Information System (INIS)

    Forsberg, C.W.; Reich, W.J.; Rowan, W.J.

    1994-01-01

    Japan is emerging as a major leader and exporter of nuclear power technology. In the 1990s, Japan has the largest and strongest nuclear power supply industry worldwide as a result of the largest domestic nuclear power plant construction program. The Japanese nuclear power supply industry has moved from dependence on foreign technology to developing, design, building, and operating its own power plants. This report describes the Japanese nuclear power supply industry and examines one supplier--the Mitsubishi group--to develop an understanding of the supply industry and its relationship to the utilities, government, and other organizations

  3. Japanese suppliers in transition from domestic nuclear reactor vendors to international suppliers

    Energy Technology Data Exchange (ETDEWEB)

    Forsberg, C.W.; Reich, W.J.; Rowan, W.J.

    1994-06-27

    Japan is emerging as a major leader and exporter of nuclear power technology. In the 1990s, Japan has the largest and strongest nuclear power supply industry worldwide as a result of the largest domestic nuclear power plant construction program. The Japanese nuclear power supply industry has moved from dependence on foreign technology to developing, design, building, and operating its own power plants. This report describes the Japanese nuclear power supply industry and examines one supplier--the Mitsubishi group--to develop an understanding of the supply industry and its relationship to the utilities, government, and other organizations.

  4. Supplier's evaluation - internal and external audits and surveillance

    International Nuclear Information System (INIS)

    Fowler, J.L.; Derrick, R.

    1976-01-01

    The quality programme for SGHWR type reactors places responsibility upon all purchasers to evaluate potential suppliers' quality systems and to conduct audits and surveillance on the implementation of suppliers' quality assurance programmes during contract performance. This will be carried out in accordance with the requirements of Central Electricity Board standard QA42. It also places a responsibilty on every supplier to conduct in-house audits and surveillance of the effectiveness of his own quality assurance programmes. These procedures are discussed. (U.K.)

  5. Supplier/customer considerations in corporate financial decisions

    Directory of Open Access Journals (Sweden)

    Jayant R. Kale

    2014-09-01

    Full Text Available Earlier research focussed on firm characteristics and the interests of financial stakeholders (shareholders and bondholders as determinants of corporate policies. Subsequent research recognized that corporate policies are determined in a broader environment that includes nonfinancial stakeholders such as suppliers, customers, labour etc. In this paper, we summarize the theoretical and empirical research that includes supplier/customer considerations in the determination of corporate policies such as capital structure, dividends, takeovers, earnings management, and product quality. We highlight the significant effect that the inclusion of supplier/customer interests has on these corporate policies.

  6. Rethinking the Centrality of Customer and Supplier Interaction in Innovation

    DEFF Research Database (Denmark)

    Johnsen, Thomas; Phillips, W.; Caldwell, N.

    This paper evaluates the assumption that interaction within customer-supplier relationships is alwaysthe pivotal point for innovation. It argues that the relevance of customer and supplier relationshipsdepends on the nature and maturity of the technology being developed, thus exploring...... the potentialvariation in customer-supplier interactions during different phases of the innovation life cycle. Thepaper commences with a brief introduction to the literature and then uses the findings from anexploratory set of interviews to illustrate the premise of the paper. The paper concludes with adiscussion...... of the implications of the findings and outlines the plans for the next stage of the research.Keywords: technology, interaction, relationships, innovation life cycle...

  7. Application of a naive Bayesians classifiers in assessing the supplier

    Directory of Open Access Journals (Sweden)

    Mijailović Snežana

    2017-01-01

    Full Text Available The paper considers the class of interactive knowledge based systems whose main purpose of making proposals and assisting customers in making decisions. The mathematical model provides a set of examples of learning about the delivered series of outflows from three suppliers, as well as an analysis of an illustrative example for assessing the supplier using a naive Bayesian classifier. The model was developed on the basis of the analysis of subjective probabilities, which are later revised with the help of new empirical information and Bayesian theorem on a posterior probability, i.e. combining of subjective and objective conditional probabilities in the choice of a reliable supplier.

  8. Cooperation Between Suppliers and Retail Chains in Developing Systemic Products

    Directory of Open Access Journals (Sweden)

    Katarzyna Bilińska-Reformat

    2016-01-01

    Full Text Available Seeking a competitive advantage, retail chains develop systemic products. Introducing systemic products to retailers' offer requires establishment of close cooperation with their suppliers. In the paper the assumption has been made that offering systemic products makes the offer more attractive for customer. It is also reason for development of cooperation between retail chains and suppliers. Selected commercial enterprises were research objects in the study. Analyses included in the paper concern the years between 2009 and 2015. Research methods: critical analysis of the literature, results of own research method concerning cooperation between retail chains and suppliers, and the case research method.

  9. INTEGRASI METODE ANP DAN TOPSIS DALAM EVALUASI KINERJA SUPPLIER DAN PENENTUAN PRIORITAS SUPPLIER BAHAN BAKU UTAMA CETAK KORAN PADA PT MASSCOM GRAPHY SEMARANG

    Directory of Open Access Journals (Sweden)

    Darminto Pujotomo

    2017-01-01

      One of the factors that influence the company performance is the presence of suppliers which supplies raw materials. PT Masscom Graphy Semarang is a printing company which has cooperated with several suppliers to ensure continuity of production. Therefore,  supplier performance evaluation conducted by the company is very important to obtain a reliable supplier in the supply of raw materials. The purpose of this research was to identify the supplier performance evaluation criteria and priorities of suppliers in accordance with the company's needs, and determined the priority order of the main raw material supplier for newspaper print. There was 17 sub-criteria used in evaluating the performance of suppliers and prioritization of suppliers. Analytical Network Process (ANP can be used as an alternative to solve a problem that had many interrelated sub-criteria or influence in decision making. Furthermore, the method Technique For Orders Preference by Similarity to Ideal Solution (TOPSIS was used for ranking suppliers. Based on the weighted sub-criteria by using ANP, the most influence subcriteria in determining the priority of suppliers offering price of 0.17227. Furthermore, to the supplier prioritization was done by using the TOPSIS method and obtained the order suppliers for raw materials paper roll was a supplier A, B, C, and D, while the raw material for the ink web was a supplier of L, N, O and M.

  10. Discards monitoring in the gillnet fishery for sole

    NARCIS (Netherlands)

    Uhlmann, S.S.

    2014-01-01

    Approximately 2-3% of the Dutch fishing quota for sole (Solea solea) is caught by a 60-vessel strong inshore fleet of gillnetters. From their home ports in IJmuiden, Scheveningen and Den Helder, these vessels fish typically with bottom-set gillnets for sole during 1 day trips between March and

  11. 31 CFR 515.546 - Accounts of Cuban sole proprietorships.

    Science.gov (United States)

    2010-07-01

    ... proprietorships. Specific licenses are issued unblocking sole proprietorships established under the laws of Cuba... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Accounts of Cuban sole proprietorships. 515.546 Section 515.546 Money and Finance: Treasury Regulations Relating to Money and Finance...

  12. The Nuclear Suppliers Group: A multilateral arrangement devoted to supplier coordination

    International Nuclear Information System (INIS)

    Dedik, T.; Thorne, C.E.; Goorevich, R.S.

    1995-01-01

    When the then-26 adherents to the Nuclear Suppliers Group (NSG) Guidelines met for the first time in more than 13 years in The Hague in April 1991 it began a new and dynamic process for coordinating the full range of nuclear supplier issues. In less than four years the NSG has expanded its membership to 31 countries and has implemented major changes to its Guidelines and commodity control lists. Enhancements to the Regime agreed to by the Group since its reinvigoration include the adoption of controls on nuclear-related-dual-use equipment, materials and technology; the requirements for a recipient country to have an agreement with the International Atomic Energy Agency calling for safeguards on its entire nuclear program, both now and in the future; a major expansion of the Trigger List (the list of commodities which ''trigger'' safeguards as a condition of supply) to clarify and add detail to the controlled commodities; comparable controls on technologies associated with Trigger List items; and ''fixes'' to the Guidelines to control retransfers and exports to countries with suspect nonproliferation credentials. This paper provides a comprehensive overview of the NSG and discusses in detail the past, present and future work of the Group

  13. Performance-based supplier audits - a quality and technical partnership

    International Nuclear Information System (INIS)

    Martin, E.L.

    1993-01-01

    The nuclear utility industry will realize the necessity and advantages of integrating engineering and quality assurance efforts into a unified, balanced approach to overview the activities of their suppliers (manufacturers)

  14. Audit of EDF generation and transmission division suppliers

    International Nuclear Information System (INIS)

    Leconte, J.P.

    1993-01-01

    This paper presents the process for acceptance by EDF/production and transmission group of suppliers, industrial equipment manufacturers and providers of repair activities or services for the maintenance of nuclear plants. 1 tab

  15. Water Service Areas - Public Water Supplier's (PWS) Service Areas

    Data.gov (United States)

    NSGIC Education | GIS Inventory — Boundaries of current public water supplier's (PWS) service areas. This data set contains the present service area boundary of the water system and does not contain...

  16. CMS rewards its best suppliers with the Crystal Award

    CERN Document Server

    Patrice Loiez

    2002-01-01

    A. Ingman of the Finnish company Outokumpu Pori Oy, F. Krähenbuhl of the Swiss firm Nexans Suisse and M. Niemerski of the American company Plascore receive the highest distinction in the CMS supplier awards - the Crystal Award.

  17. Drivers of supplier-customer relationship profitability in China

    DEFF Research Database (Denmark)

    Dawson, Bonnie; Young, Louise; Murray, John M.

    2017-01-01

    has implications for the ongoing management of international supplier-customer relationships, Chinese government policy with regard to SOEs as well as the inclusion of organization types as a consideration for business marketing relationship and value creation theory.......Business relationship performance depends on the context(s) in which the relationship is being conducted, including the cultural context and the nature of the organizations participating in them. Here, we examine the drivers of performance in Chinese supplier-customer relationships for two types...... of Chinese suppliers - International Joint Ventures (IJVs) and State Owned Enterprises (SOEs). The results indicate there are marked differences in the links between relationship drivers and perceived relationship profitability for these different types of suppliers. The profitability of SOEs' customer...

  18. The Supplier evaluation problem: the state of the art

    Directory of Open Access Journals (Sweden)

    Nazanin Ghasemy

    2018-02-01

    Full Text Available In today's competitive world, one of important factor in survival is the reduction of production cost. In the current age the companies for remaining competitive and achieving the customer satisfaction has been paid more attention to supply chain management, so that competition between companies is no longer the case, also there is between supply chains. In this regard, the supplier selection as a strategic key plays an important role in the success of companies. Selecting the right suppliers can significantly reduce the cost of purchasing and Increase the competitiveness of the organization. Decision making and supplier selection is basically a multi-criteria issue. Nevertheless, some of these criteria might be in conflict with each other. This is one of strategic importance to most organizations. The nature of such decisions is usually complex and not structured. The present paper provides a comprehensive literature review on some of articles published for supplier evaluation in recent years.

  19. CMS hand out awards of excellence to their top suppliers

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    CMS awarded its highest distinction to two suppliers: the Spanish firm Felguera Construcciones Mecanicas, represented by Ernesto Alvarez (left) and the Japanese firm Kawasaki Heavy Industries, represented by Kazuo Mizuno (right).

  20. How environmental collaboration with suppliers and customers influences firm performance

    NARCIS (Netherlands)

    Grekova, K.; Calantone, R.J.; Bremmers, H.J.; Trienekens, J.H.; Omta, S.W.F.

    2016-01-01

    Searching for sustainable growth opportunities, manufacturing firms are increasingly embedding sustainability concerns into their relationships with supply chain partners. In the present paper, we explore the potential of environmental collaboration with suppliers and customers to induce

  1. Integrated model for supplier selection and performance evaluation

    Directory of Open Access Journals (Sweden)

    Borges de Araújo, Maria Creuza

    2015-08-01

    Full Text Available This paper puts forward a model for selecting suppliers and evaluating the performance of those already working with a company. A simulation was conducted in a food industry. This sector has high significance in the economy of Brazil. The model enables the phases of selecting and evaluating suppliers to be integrated. This is important so that a company can have partnerships with suppliers who are able to meet their needs. Additionally, a group method is used to enable managers who will be affected by this decision to take part in the selection stage. Finally, the classes resulting from the performance evaluation are shown to support the contractor in choosing the most appropriate relationship with its suppliers.

  2. Commercial off-the-shelf software dedication process based on the commercial grade survey of supplier

    International Nuclear Information System (INIS)

    Kim, J. Y.; Lee, J. S.; Chon, S. W.; Lee, G. Y.; Park, J. K.

    2000-01-01

    Commercial Off-The-Shelf(COTS) software dedication process can apply to a combination of methods like the hardware commercial grade item dedication process. In general, these methods are : methods 1(special test and inspection), method 2(commercial grade survey of supplier), method 3(source verification), and method 4(acceptance supplier/item performance record). In this paper, the suggested procedure-oriented dedication process on the basis of method 2 for COTS software is consistent with EPRI/TR-106439 and NUREG/CR-6421 requirements. Additional tailoring policy based on code and standards related to COTS software may be also founded in the suggested commercial software dedication process. Suggested commercial software dedication process has been developed for a commercial I and C software dedication who performs COTS qualification according to the dedication procedure

  3. 2010 Defense Logistics Agency Enterprise Supplier Conference and Exhibition

    Science.gov (United States)

    2010-08-25

    bakeries • Soda distributors • Ration assemblers and component suppliers • Food service equipment suppliers Focus on Industry WARFIGHTER FOCUSED...CHAIN LEADERSHIP 18 • Bread & Dairy – Unique market… regionally focused based on local bakeries and dairy plants – Many local businesses with limited...do) who not to buy from. • IDs buy many components directly from franchised distribution. Poor reflection of their customers. • Franchised

  4. Applying Fuzzy Decision Making Approach to IT Outsourcing Supplier Selection

    OpenAIRE

    Gülcin Büyüközkan; Mehmet Sakir Ersoy

    2009-01-01

    The decision of information technology (IT) outsourcing requires close attention to the evaluation of supplier selection process because the selection decision involves conflicting multiple criteria and is replete with complex decision making problems. Selecting the most appropriate suppliers is considered an important strategic decision that may impact the performance of outsourcing engagements. The objective of this paper is to aid decision makers to evaluate and assess possible IT outsourc...

  5. Building partnerships with suppliers as a new trend in management

    OpenAIRE

    Weiss Elżbieta; Tyszkiewicz Rafał

    2016-01-01

    The main objective of the paper is to show the importance of building partnerships with suppliers, and to present the results of research verifying the following hypothesis: Most of the furniture industry companies in Lower Silesia take into account the partnership relations with suppliers in their formulated business strategy. The study was carried out using CATI method and included a research sample consisting of 110 enterprises of Lower Silesia. Enterprises were selected using the purposiv...

  6. Determinants of supplier-buyer relationship competitiveness in transnational companies

    Directory of Open Access Journals (Sweden)

    Matevž Rašković

    2013-03-01

    Full Text Available Effective supplier-buyer relationship management should not be seen only in terms of cost and financial measures, as outlined by Transaction cost economics, but also in terms of other (“softer” relational benefits, like e.g. more comprehensive information sharing, higher levels of trust, better cooperation and increased relationship flexibility. This second view is grounded in both Relationship marketing and Resource-advantage theory. Surprisingly, only a few research papers on supplier-buyer relationships address both of these perspectives equally, as well as in terms of long-term competitiveness (vis-avis a traditional short-term performance. The purpose of this paper is to analyze business relationship determinants of supplier-buyer relationship competitiveness, where we study the impact of (1 relationship-based information exchange, (2 network spillover effects, (3 transaction-specific investments, (4 trust, (5 cooperation (joint actions and (6 flexibility on perceived (7 supplier-buyer relationship competitiveness. In this regard the main research question of our study is: Which relational and transactional dimensions determine supplier-buyer relationship competitiveness, as well as how strongly? To provide the answer this research question we employ an exploratory-type Partial Least Squares (PLS regression in conjunction with a novel perspective of network spillover effects, as a set of independent variables in our model. The data set consists of a sample of 130 international suppliers (approx. 30 % response rate connected to a transnational company (TNC headquartered in Slovenia, which operates in the steel construction solutions’ industry. Our results clearly identify a relational and a transactional set of determinants of supplier-buyer relationship competitiveness, with the former having a significantly higher impact on competitiveness than the latter. With regards to specific dimensions associated with this relational component

  7. SDC Supplier Obligation project : household energy from 2011 : final report

    OpenAIRE

    Sustainable Development Commission

    2008-01-01

    This report is based on 'SDC Supplier Obligation engagement project : process plan'. Evaluation of the engagement process used in this report can be found in 'SDC Supplier Obligation project : an evaluation of the Sustainable Development Commission's stakeholder and public engagement process'. This report presents the findings of the Sustainable Development Commission’s stakeholder and public engagement process and informs the development of Department for Environment, Food and Rural Af...

  8. The Strategic Importance of Supplier Relationships in the Automotive Industry

    Directory of Open Access Journals (Sweden)

    Ove Brandes

    2013-06-01

    stakeholders, and who can outsource a large part of the technical development to the suppliers in areas also close to the core competences. The automakers must accept that their suppliers have competing automakers as their customers and search for synergies in their product portfolio. Theoretically, there is a need for conceptual development through deeper studies of the firm’s relational capability and its implications.

  9. Supplier selection based on multi-criterial AHP method

    Directory of Open Access Journals (Sweden)

    Jana Pócsová

    2010-03-01

    Full Text Available This paper describes a case-study of supplier selection based on multi-criterial Analytic Hierarchy Process (AHP method.It is demonstrated that using adequate mathematical method can bring us “unprejudiced” conclusion, even if the alternatives (suppliercompanies are very similar in given selection-criteria. The result is the best possible supplier company from the viewpoint of chosen criteriaand the price of the product.

  10. Liability of suppliers to nuclear power plants in Western Europe

    International Nuclear Information System (INIS)

    Kuhn, W.

    1988-01-01

    The Paris Convention provides that liability for a nuclear incident is channelled onto the operator of the nuclear installation concerned. However, the author analyses in which cases and by what mechanisms, the operator can have a right of recourse against a supplier of that installation. He illustrates, by several scenarios of nuclear incident with transfrontier effects how a supplier may be held liable, and describes the relevant rules of law applicable, based on private international law and tort law principles (NEA) [fr

  11. Antecedents and Consequences of Supplier Performance Evaluation Efficacy

    Science.gov (United States)

    2016-06-30

    Naval Postgraduate School supplier prior to contract award. Furthermore, the impact of deficient SPEs on the industrial supply base is unknown...identified evaluator turnover as having a potential impact on supplier evaluations over time. Therefore, is it posited that: H6: There will be a negative...Naval Postgraduate School H13 : There will be a positive relationship between communication formality and perceived accuracy. Weaknesses

  12. Sustainable Supplier Performance Evaluation and Selection with Neofuzzy TOPSIS Method

    OpenAIRE

    Chaharsooghi, S. K.; Ashrafi, Mehdi

    2014-01-01

    Supplier selection plays an important role in the supply chain management and traditional criteria such as price, quality, and flexibility are considered for supplier performance evaluation in researches. In recent years sustainability has received more attention in the supply chain management literature with triple bottom line (TBL) describing the sustainability in supply chain management with social, environmental, and economic initiatives. This paper explores sustainability in supply chain...

  13. ABOUT INDEX EVALUATION OF MATERIAL RESOURCE SUPPLIER SELECTION

    Directory of Open Access Journals (Sweden)

    V. A. Skochinskaya

    2008-01-01

    Full Text Available The paper analyzes existing methods for evaluation of material resource supplier selection. It shows advantages and shortcomings of the present evaluation systems. The necessity for application of an index evaluation is justified in the paper. The paper contains rating (index evaluation for material resource supplier selection which is based on the application of quantitative (index tool instead of an expert (numerical evaluation. 

  14. A simulated annealing approach to supplier selection aware inventory planning

    OpenAIRE

    Turk, Seda; Miller, Simon; Özcan, Ender; John, Robert

    2015-01-01

    Selection of an appropriate supplier is a crucial and challenging task in the effective management of a supply chain. Also, appropriate inventory management is critical to the success of a supply chain operation. In recent years, there has been a growing interest in the area of selection of an appropriate vendor and creating good inventory planning using supplier selection information. In this paper, we consider both of these tasks in a two-stage approach employing Interval Type-2 Fuzzy Sets ...

  15. The responsibility of nuclear suppliers in the international market

    International Nuclear Information System (INIS)

    Thiessen, C.W.; Cotton, J.D.; Tait, B.I.

    1978-01-01

    As a result of escalating oil prices, the developing countries are more and more turning to nuclear energy. As these countries become a more significant part of the international market, unique issues must be faced by the utility and country concerned and the nuclear supplier. A fundamental prerequisite of a successful supplier/customer relationship is a good relationship between their two governments. The supplier can fulfil an effective liaison function to ensure efficiency of communications in this area. In the preplanning phase the supplier can play a major role in supplying information relative to siting, unit size, system planning and plant economics. Once the nuclear choice is made, the pros and cons of purchasing plants on a turnkey versus non-turnkey basis must be weighed. The customer must balance his available resources and experience against his desires for acquisition of overall plant and systems knowledge. During the planning and procurement phase the subject of training, maintenance and service facilities can be an effective part of a comprehensive nuclear programme. In fact, local training and service centres could logically be the first step of a long-term localization effort. With respect to localization the supplier should be capable and experienced in developing this capability and willing to make a long-term commitment in this area. Through a clearer understanding of the responsibilities of the nuclear supplier and a clear delineation of his role, developing nations can more adequately assess the basis upon which to move forward on a nuclear programme. (author)

  16. An examination of hospital satisfaction with blood suppliers.

    Science.gov (United States)

    Carden, Robert; DelliFraine, Jami L

    2004-11-01

    The purpose of this study was to identify factors that predict overall hospital satisfaction with blood suppliers. The data for this study came from a 2001 satisfaction survey of hospital blood bank managers conducted by the National Blood Data Resource Center. A total of 1325 blood-utilizing hospitals were included in the final study database. The measurement of hospital satisfaction with its blood supplier encompasses the five composites of the SERVQUAL model. The five composites are 1) tangibles, 2) reliability, 3) responsiveness, 4) assurance, and 5) empathy. Linear regression was performed with overall hospital satisfaction as the dependent variable and the five composites of the SERVQUAL model and control variables as predictors of overall hospital satisfaction with blood suppliers. Significant predictors of hospital satisfaction with blood suppliers are satisfaction with medical and clinical support provided by the blood center, satisfaction with the routine delivery schedule, and price (service fee) of red cells. Prior studies have demonstrated the importance of customer satisfaction to organizations. As organizations, blood centers can benefit from improved satisfaction from their hospital customers. Blood center strategies that focus on improving these three predictors of overall hospital satisfaction with primary blood suppliers will be the most likely to improve and/or maintain hospital customer satisfaction with primary blood suppliers.

  17. Supplier relationship management leverages intellectual capital for increased competitive advantage

    Directory of Open Access Journals (Sweden)

    C. R. Van Zyl

    2005-12-01

    Full Text Available The main purpose of this article is to demonstrate how supplier relationship management (SRM enables the capture and creation of intellectual capital, thereby attaining and sustaining a strategic competitive advantage and increasing supply chain profitability. In order to achieve this purpose, a large part of the article is devoted to exploring the relatively new and unknown field of SRM. It is shown that an organisation must possess a thorough understanding of good supplier characteristics and of the drivers, benefits and requirements for the successful implementation of SRM, in order to enable that organisation to leverage their supplier relationships to ensure the capture of supplier expertise, patents, experiences etc. (i.e. their intellectual capital. The article then explores how the integration of technology in SRM applications can improve the efficiency of supplier collaboration and intellectual capital capture and creation. It is then demonstrated how efficient and collaborative supplier relationships improve supply chain profitability and competitiveness. Lastly, the article explores the implementation pitfalls and trends of SRM that must be constantly considered and monitored by an organisation in order to continually capture and create intellectual capital and reap the full benefits of SRM. This exploration involved an examination of contemporary literature, theories and business cases and subsequently revealed that SRM is a vital discipline/philosophy that must be implemented by any organisation wishing to achieve greater supply chain efficiency and competitiveness. This competitiveness can only be achieved through the mutual unlocking, sharing and leveraging of intellectual capital.

  18. Using MACBETH method for supplier selection in manufacturing environment

    Directory of Open Access Journals (Sweden)

    Prasad Karande

    2013-04-01

    Full Text Available Supplier selection is always found to be a complex decision-making problem in manufacturing environment. The presence of several independent and conflicting evaluation criteria, either qualitative or quantitative, makes the supplier selection problem a candidate to be solved by multi-criteria decision-making (MCDM methods. Even several MCDM methods have already been proposed for solving the supplier selection problems, the need for an efficient method that can deal with qualitative judgments related to supplier selection still persists. In this paper, the applicability and usefulness of measuring attractiveness by a categorical-based evaluation technique (MACBETH is demonstrated to act as a decision support tool while solving two real time supplier selection problems having qualitative performance measures. The ability of MACBETH method to quantify the qualitative performance measures helps to provide a numerical judgment scale for ranking the alternative suppliers and selecting the best one. The results obtained from MACBETH method exactly corroborate with those derived by the past researchers employing different mathematical approaches.

  19. Consumer-supplier-government triangular relations. Rethinking the UK policy path for carbon emissions reduction from the UK residential sector

    Energy Technology Data Exchange (ETDEWEB)

    Parag, Yael; Darby, Sarah [Environmental Change Institute, University of Oxford, OUCE, South Parks Road, Oxford OX1 3QY (United Kingdom)

    2009-10-15

    The UK residential (household) sector is responsible for approximately 30% of total carbon dioxide emissions and is often seen as the most promising in terms of early reductions. As most direct household emissions come from only two fuel sources, this paper critically examines how existing emissions reduction policies for the sector shape - and are shaped by - relations between the three main groups of actor in this policy domain: central government, gas and electricity suppliers, and energy users. Focusing on relations between three dyads (government-suppliers, suppliers-consumers and consumers-government) enables us to examine aspects of demand reduction that have often been overlooked to date. By 'relations' we refer to services, power relationships and flows of capital and information, as well as less easily defined elements such as loyalty, trust and accountability. The paper argues that the chosen government policy path to deliver demand reduction, which heavily emphasises the suppliers' role, suffers from principal-agent problems, fails to align consumers and supplier interests toward emissions reduction, and does not yet portray a lower-carbon future in positive terms. It suggests that more attention should be paid to government-consumer relations, recognising that energy consumers are also citizens. (author)

  20. Consumer-supplier-government triangular relations: Rethinking the UK policy path for carbon emissions reduction from the UK residential sector

    Energy Technology Data Exchange (ETDEWEB)

    Parag, Yael [Environmental Change Institute, University of Oxford, OUCE, South Parks Road, Oxford OX1 3QY (United Kingdom)], E-mail: yael.parag@ouce.ox.ac.uk; Darby, Sarah [Environmental Change Institute, University of Oxford, OUCE, South Parks Road, Oxford OX1 3QY (United Kingdom)

    2009-10-15

    The UK residential (household) sector is responsible for approximately 30% of total carbon dioxide emissions and is often seen as the most promising in terms of early reductions. As most direct household emissions come from only two fuel sources, this paper critically examines how existing emissions reduction policies for the sector shape - and are shaped by - relations between the three main groups of actor in this policy domain: central government, gas and electricity suppliers, and energy users. Focusing on relations between three dyads (government-suppliers, suppliers-consumers and consumers-government) enables us to examine aspects of demand reduction that have often been overlooked to date. By 'relations' we refer to services, power relationships and flows of capital and information, as well as less easily defined elements such as loyalty, trust and accountability. The paper argues that the chosen government policy path to deliver demand reduction, which heavily emphasises the suppliers' role, suffers from principal-agent problems, fails to align consumers and supplier interests toward emissions reduction, and does not yet portray a lower-carbon future in positive terms. It suggests that more attention should be paid to government-consumer relations, recognising that energy consumers are also citizens.

  1. Consumer-supplier-government triangular relations: Rethinking the UK policy path for carbon emissions reduction from the UK residential sector

    International Nuclear Information System (INIS)

    Parag, Yael; Darby, Sarah

    2009-01-01

    The UK residential (household) sector is responsible for approximately 30% of total carbon dioxide emissions and is often seen as the most promising in terms of early reductions. As most direct household emissions come from only two fuel sources, this paper critically examines how existing emissions reduction policies for the sector shape - and are shaped by - relations between the three main groups of actor in this policy domain: central government, gas and electricity suppliers, and energy users. Focusing on relations between three dyads (government-suppliers, suppliers-consumers and consumers-government) enables us to examine aspects of demand reduction that have often been overlooked to date. By 'relations' we refer to services, power relationships and flows of capital and information, as well as less easily defined elements such as loyalty, trust and accountability. The paper argues that the chosen government policy path to deliver demand reduction, which heavily emphasises the suppliers' role, suffers from principal-agent problems, fails to align consumers and supplier interests toward emissions reduction, and does not yet portray a lower-carbon future in positive terms. It suggests that more attention should be paid to government-consumer relations, recognising that energy consumers are also citizens.

  2. Supplier Selection Study under the Respective of Low-Carbon Supply Chain: A Hybrid Evaluation Model Based on FA-DEA-AHP

    Directory of Open Access Journals (Sweden)

    Xiangshuo He

    2018-02-01

    Full Text Available With the development of global environment and social economy, it is an indispensable choice for enterprises to achieve sustainable growth through developing low-carbon economy and constructing low-carbon supply chain. Supplier is the source of chain, thus selecting excellent low-carbon supplier is the foundation of establishing efficient low-carbon supply chain. This paper presents a novel hybrid model for supplier selection integrated factor analysis (FA, data envelopment analysis (DEA, with analytic hierarchy process (AHP, namely FA-DEA-AHP. First, an evaluation index system is built, incorporating product level, qualification, cooperation ability, and environmental competitiveness. FA is utilized to extract common factors from the 18 pre-selected indicators. Then, DEA is applied to establish the pairwise comparison matrix and AHP is employed to rank these low-carbon suppliers comprehensively and calculate the validity of the decision-making units. Finally, an experiment study with seven cement suppliers in a large industrial enterprise is carried out in this paper. The results reveal that the proposed technique can not only select effective suppliers, but also realize a comprehensive ranking. This research has enriched the methodology of low-carbon supplier evaluation and selection, as well as owns theoretical value in exploring the coordinated development of low-carbon supply chain to some extent.

  3. A NEW DESIGN METHOD FOR FLAT FOOTWEAR SOLES

    Directory of Open Access Journals (Sweden)

    IONESCU Cozmin

    2016-05-01

    Full Text Available Carried research regarding footwear soles reveald that by moulding footwear details can be obtained in a wide variety of models. Shoe soles are complex three dimensional objects and for attaching them with the uppers, the interor countour of the soles has to correspond to the featherline contour of the last. That’s why, is necessary that soles design to be done with high accuracy and in strict accordance to the last. Nowadays, there are specialized software applications which can perform various computer aided design processes for footwear. Among the high performance systems used for the design of footwear soles and injection moulds for shoe soles, we may mention: Delcam Shoe Solution, Delcam PowerSHAPE-e, Padsy II and Padsy III, Shoe Master System, Lectra System, Parmel System and ATOS II System. This paper presents a 3D design method, developed by the authors, for footwear flat soles using PowerSHAPE-e software programm from of Delcam Crispin. The computer-aided design technique used in this paper highlights several important advantages that include: increased design quality; three dimensional viewing of soles, which can lead to immediate decisions, regarding the acceptance of newly developed models; it can be appreciated the complexity of mould cavities execution, without the need of making prototypes; the outlines of construction templates are accurately obtained for the mould cavities and for all size numbers; calculations can easily be done for determining the soles volume for the entire size number, with implications on estimating polymer blend consumption and so on.

  4. Profiles of Major Suppliers to the Automotive Industry : Vol. 2. Iron, Steel and Aluminum Suppliers to the Automotive Industry

    Science.gov (United States)

    1982-08-01

    This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

  5. Profiles of Major Suppliers to the Automotive Industry : Vol. 7. Machine Tool Suppliers to the Automotive Industry.

    Science.gov (United States)

    1982-08-01

    This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

  6. Profiles of Major Suppliers to the Automotive Industry : Vol. 4. North American Automotive Parts and Components Suppliers

    Science.gov (United States)

    1982-08-01

    This study summarizes extensive information collected over a two-year period (October 1978 to October 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study...

  7. Sustaining Competitiveness Through product Development Activities Within Malaysian Automotive Suppliers

    Directory of Open Access Journals (Sweden)

    Norizah Mohamad

    2012-01-01

    Full Text Available The local automotive suppliers are facing a number of important challenges such asglobalisation, new requirement in market specifications and the competition brought about by theAsean Free Trade Area (AFTA agreements. In an effort to enhance the competitiveness of themanufacturing sector, the government has implemented the Second Industrial Master Plan, IMP2(1996-2005. The focus of the IMP2 is more on innovation and applications of new technologies, sothat industries can move up the value chain of their activities. Innovative capabilities achieved fromcompanies’ new product development activities have been recognized to be crucial for companies tosustain their competitiveness and organisational success. The importance of product development ismost obvious in the context of the discussion on the competitiveness of the Malaysian automotivesuppliers. The study will focus on the small medium enterprises (SMEs that make up more than 60 %of these automotive suppliers. The study is to determine the extensiveness of the suppliers’ productdevelopment activities by examining the involvement of the suppliers in customer’s productdevelopment activities. Consequently, the impact of this involvement to the competitiveness of thesuppliers is examined. The results were established based from a survey to parts and componentssuppliers of Proton, the Malaysian car national assembler. The study has shown that the SMEs wereinvolved from the early stages of the product development process that is during the design stage. Theproduct development efforts have shown to contribute towards increasing firms’ market share andfirms were also able to gain a better understanding of future product demand. A significant number ofthe suppliers have managed to penetrate the export market. Unfortunately, among the respondents,there is only one system supplier. This indicates that, either the technological capabilities of theSMEs still needed upgrading for the requirement as

  8. MORPHOMETRIC EVIDENCE FOR NUTRITIONAL STRESS IN ENGLISH SOLE

    Science.gov (United States)

    We present an application of the powerful thin plate spline method of morphometric analysis to demonstrate its utility for detecting environmental stress in an estuarine flatfish. Juvenile English sole (Pleuronectes vetulus) were captured from Yaquina Bay, Oregon, photographed w...

  9. Disorders presenting with headache as the sole symptom ...

    African Journals Online (AJOL)

    Disorders presenting with headache as the sole symptom. ... Log in or Register to get access to full text downloads. ... probably do not require sophisticated neurological skills or investigations, failure to recognise an underlying disorder or an ...

  10. Unveiling the importance of being a preferred customer in order to develop innovations with suppliers

    NARCIS (Netherlands)

    Schiele, Holger

    2010-01-01

    Purpose of the paper and literature addressed: The purpose of this research is to understand why early supplier integration in new product development repeatedly fails and how to select the right suppliers to avoid supplier obstructionism. We review the literature on early supplier integration.

  11. Supplier Portfolio Selection and Optimum Volume Allocation: A Knowledge Based Method

    NARCIS (Netherlands)

    Aziz, Romana; Aziz, R.; van Hillegersberg, Jos; Kersten, W.; Blecker, T.; Luthje, C.

    2010-01-01

    Selection of suppliers and allocation of optimum volumes to suppliers is a strategic business decision. This paper presents a decision support method for supplier selection and the optimal allocation of volumes in a supplier portfolio. The requirements for the method were gathered during a case

  12. Basal Cell Carcinoma on the Sole: An Easily Missed Cancer

    Directory of Open Access Journals (Sweden)

    Natalie L. Hone

    2016-10-01

    Full Text Available Basal cell carcinoma (BCC is the most common skin cancer, and solar ultraviolet ray exposure is the most significant risk factor for its development. The plantar foot is infrequently exposed to the sun, thus the presence of BCC on the sole is rare. We report a case of BCC on the sole of the foot and its treatment in the hope to facilitate its detection.

  13. Electrification of the transportation sector: Is there a need for restructuring the automotive parts suppliers?

    Science.gov (United States)

    Bekaslan, A. Ebru

    The future of the transportation sector has significant implications for the mitigation of climate change through reduced GHG emissions as well as achieving energy efficiency and energy independence. Battery-powered, plug-in, and hybrid electric vehicles are widely seen as the greatest source of a solution. This thesis analyzes the historical development and growth of the automotive industry as well as the restructuring toward the next generation technologies in comparison with the U.S. and China to shed light on the question of how a developing country can structure its strategies to be able to upgrade and be competitive over time. Conventional business models can become obsolete. Companies will find it difficult to maintain their market position unless they gain new perspectives on the outlook of the industry as a whole, and take into account the successful business models of tomorrow. The potential for further growth of the Turkish automotive supplier base particularly in the next generation of automotive technologies is therefore highly dependent on policies and strategies at the national level as much as its dependence on the global strategies of the automotive industry's major players. In this sense, the key questions that motivate this study are whether there are foreseeable technological changes and product-segmentation strategies that could significantly enhance the competitiveness of local Turkish suppliers of automotive components. The thesis builds on the theory of innovative enterprise and evolutionary agglomeration to examine the competitive potential of the Konya Auto Part Suppliers' Cluster in Turkey.

  14. Fishmeal Supplier Evaluation and Selection for Aquaculture Enterprise Sustainability with a Fuzzy MCDM Approach

    Directory of Open Access Journals (Sweden)

    Tsung-Hsien Wu

    2017-11-01

    Full Text Available In the aquaculture industry, feed that is of poor quality or nutritionally imbalanced can cause problems including low weight, poor growth, poor palatability, and increased mortality, all of which can induce a decrease in aquaculture production. Fishmeal is considered a better source of protein and its addition as an ingredient in the aquafeed makes aquatic animals grow fast and healthy. This means that fishmeal is the most important feed ingredient in aquafeed for the aquaculture industry. For the aquaculture industry in Taiwan, about 144,000 ton/USD $203,245,000 of fishmeal was imported, mostly from Peru, in 2016. Therefore, the evaluation and selection of fishmeal suppliers is a very important part of the decision-making process for a Taiwanese aquaculture enterprise. This study constructed a multiple criteria decision-making evaluation model for the selection of fishmeal suppliers using the VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR approach based on the weights obtained with the entropy method in a fuzzy decision-making environment. This hybrid approach could effectively and conveniently measure the comprehensive performance of the main Peruvian fishmeal suppliers for practical applications. In addition, the results and processes described herein function as a good reference for an aquaculture enterprise in making decisions when purchasing fishmeal.

  15. Barriers to Maori sole mothers’ primary health care access

    Directory of Open Access Journals (Sweden)

    Lee R

    2013-12-01

    Full Text Available INTRODUCTION: International research consistently shows that sole mothers experience poorer health and suboptimal health care access. New Zealand studies on sole mothers' health report similar findings. The aim of this exploratory research was to better understand the experiences of Maori sole mothers' access to health services, particularly primary health care, for personal health needs. METHODS: This qualitative study employed a general inductive design informed by a Kaupapa Maori approach, providing guidance on appropriate cultural protocols for recruiting and engaging Maori participants. Distributing written information and snowballing techniques were used to purposively recruit seven Maori sole mothers. Data collection involved semi-structured interviews which were digitally recorded and transcribed verbatim. Data were analysed using general inductive thematic analysis to identify commonalities and patterns in participants' experiences. FINDINGS: The dominant themes that emerged captured and described participants' experiences in accessing health care. The major barrier to access reported was cost. Compounding cost, transport difficulties and location or scheduling of services were additional barriers to health service accessibility. Child-related issues also posed a barrier, including prioritising children's needs and childcare over personal health needs. CONCLUSION: The findings illuminate Maori sole mothers' experiences of accessing health care and the complex socioeconomic inequalities affecting access options and uptake of services. Further investigation of barriers to access is needed. The study has implications for addressing barriers to access at policy, funding and practice levels to improve health outcomes and equitable health care access for Maori sole mothers.

  16. A model of the supplier involvement in the product innovation

    Directory of Open Access Journals (Sweden)

    Kumar Manoj

    2017-01-01

    Full Text Available In this paper we examine the product innovation in a supply chain by a supplier and derive a model for a supplier’s product innovation policy. The product innovation of a supplier can contribute to the long-term competitiveness for the supply chain, and as it is for many supply chains a major factor, it should be considered in the development of strategies for a supplier. Here, we evaluate the effectiveness of supplier product innovation as a strategic tool to enhance the competitiveness and viability of supply chain. This paper explores the dynamic research performance of a supplier with endogenous time preference under a given arrangement of product innovation. We find that the optimal effort level and the achieved product innovation obey a saddle point path, or show tremendous fluctuations even without introducing the stochastic nature of product innovative activity. We also find that the fluctuation frequency is largely dependent both on the supplier’s characteristics such as supplier’s product innovative ability and on the nature of product innovation process per se. Short-run analyses are also made on the effect of supply chain cooperation in the product innovation process.

  17. Exploring the link between relationship quality and loyalty: Gaining Insights into Manufacturer-Supplier Relationships

    OpenAIRE

    Lemke, Fred

    2003-01-01

    Manufacturers across industry sectors are gradually reducing their supplier base. Consequently, suppliers need an appropriate strategy to ensure preferred supplier status. It is argued, that `softer' - or more intangible - relationship factors potentially have the power to distinguish suppliers. But what are the intangible factors? How does a customer value them? Do they have an impact on the supplier selection process at all? Questions like these describe an area that ha...

  18. A simplified, result oriented supplier performance management system testing framework for SME

    OpenAIRE

    Satya Parkash Kaushik; Veerender Kumar Kaushik

    2014-01-01

    Background: Supplier performance management continues to be a significant concern for small & medium enterprises (SME). How can small & medium enterprises better position themselves to check and sustain actual supplier performance improvement? A key framework is the establishment of a value-added supplier performance audit program that places significant emphasis on supplier performance controls. A value-added supplier audit program can help SME mitigate business and regulatory risk w...

  19. AHP approach for supplier evaluation and selection in a steel manufacturing company

    OpenAIRE

    Tahriri, Farzad; Osman, M. Rasid; Ali, Aidy; Yusuff, Rosnah Mohd; Esfandiary, Alireza

    2008-01-01

    Supplier selection is one of the most critical activities of purchasing management in supply chain. Supplier selection is a complex problem involving qualitative and quantitative multi-criteria. A trade-off between these tangible and intangible factors is essential in selecting the best supplier. The work incorporates AHP in choosing the best suppliers. The results suggest that AHP process makes it possible to introduce the optimum order quantities among the selected suppliers so that the Tot...

  20. Sources management

    International Nuclear Information System (INIS)

    Mansoux, H.; Gourmelon; Scanff, P.; Fournet, F.; Murith, Ch.; Saint-Paul, N.; Colson, P.; Jouve, A.; Feron, F.; Haranger, D.; Mathieu, P.; Paycha, F.; Israel, S.; Auboiroux, B.; Chartier, P.

    2005-01-01

    Organized by the section of technical protection of the French society of radiation protection ( S.F.R.P.), these two days had for objective to review the evolution of the rule relative to the sources of ionising radiations 'sealed and unsealed radioactive sources, electric generators'. They addressed all the actors concerned by the implementation of the new regulatory system in the different sectors of activities ( research, medicine and industry): Authorities, manufacturers, and suppliers of sources, holders and users, bodies involved in the approval of sources, carriers. (N.C.)

  1. Stiffness Effects in Rocker-Soled Shoes: Biomechanical Implications

    Science.gov (United States)

    Su, Pei-Fang; Chung, Chia-Hua; Hsia, Chi-Chun; Chang, Chih-Han

    2017-01-01

    Rocker-soled shoes provide a way to reduce the possible concentration of stress, as well as change movement patterns, during gait. This study attempts to examine how plantar force and spatio-temporal variables are affected by two rocker designs, one with softer and one with denser sole materials, by comparing them with the barefoot condition and with flat-soled shoes. Eleven subjects’ gait parameters during walking and jogging were recorded. Our results showed that compared with barefoot walking, plantar forces were higher for flat shoes while lower for both types of rocker shoes, the softer-material rocker being the lowest. The plantar force of flat shoes is greater than the vertical ground reaction force, while that of both rocker shoes is much less, 13.87–30.55% body weight. However, as locomotion speed increased to jogging, for all shoe types, except at the second peak plantar force of the denser sole material rocker shoes, plantar forces were greater than for bare feet. More interestingly, because the transmission of force was faster while jogging, greater plantar force was seen in the rocker-soled shoes with softer material than with denser material; results for higher-speed shock absorption in rocker-soled shoes with softer material were thus not as good. In general, the rolling phenomena along the bottom surface of the rocker shoes, as well as an increase in the duration of simultaneous curve rolling and ankle rotation, could contribute to the reduction of plantar force for both rocker designs. The possible mechanism is the conversion of vertical kinetic energy into rotational kinetic energy. To conclude, since plantar force is related to foot-ground interface and deceleration methods, rocker-design shoes could achieve desired plantar force reduction through certain rolling phenomena, shoe-sole stiffness levels, and locomotion speeds. PMID:28046009

  2. Stiffness Effects in Rocker-Soled Shoes: Biomechanical Implications.

    Directory of Open Access Journals (Sweden)

    Shih-Yun Lin

    Full Text Available Rocker-soled shoes provide a way to reduce the possible concentration of stress, as well as change movement patterns, during gait. This study attempts to examine how plantar force and spatio-temporal variables are affected by two rocker designs, one with softer and one with denser sole materials, by comparing them with the barefoot condition and with flat-soled shoes. Eleven subjects' gait parameters during walking and jogging were recorded. Our results showed that compared with barefoot walking, plantar forces were higher for flat shoes while lower for both types of rocker shoes, the softer-material rocker being the lowest. The plantar force of flat shoes is greater than the vertical ground reaction force, while that of both rocker shoes is much less, 13.87-30.55% body weight. However, as locomotion speed increased to jogging, for all shoe types, except at the second peak plantar force of the denser sole material rocker shoes, plantar forces were greater than for bare feet. More interestingly, because the transmission of force was faster while jogging, greater plantar force was seen in the rocker-soled shoes with softer material than with denser material; results for higher-speed shock absorption in rocker-soled shoes with softer material were thus not as good. In general, the rolling phenomena along the bottom surface of the rocker shoes, as well as an increase in the duration of simultaneous curve rolling and ankle rotation, could contribute to the reduction of plantar force for both rocker designs. The possible mechanism is the conversion of vertical kinetic energy into rotational kinetic energy. To conclude, since plantar force is related to foot-ground interface and deceleration methods, rocker-design shoes could achieve desired plantar force reduction through certain rolling phenomena, shoe-sole stiffness levels, and locomotion speeds.

  3. What a utility expects from its supplier organizations

    International Nuclear Information System (INIS)

    Winitsky, H.B.

    1986-01-01

    The suppliers of its goods and services are a most important resource of the utility industry. The unique and mutually beneficial technical relationship between utilities and their suppliers has been and continues to be a major contributor to the power industry's viability, vitality and growth, and thus to America's standard of living. The commercial and legal aspects of this relationship have been changing. This paper addresses the principles of: reasonably allocating and responsibility and accountability for ''the products'' provided to utilities including nuclear utilities; equitable risk-sharing as a prime requirement of utility procurement decision making; and the present and future relationship of the unique supplier/utility partnership as influenced and shaped by these requirements

  4. Challenges to nuclear suppliers : positioning for the nuclear renaissance

    International Nuclear Information System (INIS)

    Reimels, R.

    2006-01-01

    With energy demand rising and the increasing recognition of the role of nuclear power as part of the energy mix, opportunities and challenges face the nuclear industry. The ability of nuclear industries to respond to utility requirements in terms of costs, schedule and quality will be determined by entire supplier base. The author speaks to the challenge of the entire infrastructure of suppliers to respond to these opportunities and challenges. Key issues are resource planning, procurement, risk management, supplier collaborations (such as teaming and partnerships); standardization of practices to minimize costs and time; and not least of which, the training, development and recruitment of labour. The author shares his perspective on the role of the supply chain to ensure it has the right resources to provide safe, cost-effective and reliable nuclear deliverables

  5. Identification of a supplier network through Quality Function Deployment

    DEFF Research Database (Denmark)

    Kristensen, Preben Sander; Holmen, Elsebeth

    1994-01-01

    and characteristics constituting this fan were based on the company's knowledge before entering into development interaction with suppliers. If these characteristics are used to express the company's demand in the subsequent interaction process, much information may be lost. We suggest that in development interacton...... supplier a company has to cancel the initial transformation processes that caused it to start interaction with the supplier in question, and start interaction on the basis of end-user attributes in their original forms, making new transofrmation processes into characteristics based on the joint knowledge......During 1993-94 the authors followed a product development process in a Danish Butter Cookie company. The process was structured according to the Quality Function Deployment technique House of Quality. Customer attributes were derived from a discus a diabetics end-user focus group. During a series...

  6. Understanding Supplier Resistance - Overcoming Obstacles to Supply Innovation

    Directory of Open Access Journals (Sweden)

    New Steve

    2014-11-01

    Full Text Available This paper explores an important but unexplored theme in the development of 'total quality' relationships in the supply chain: why suppliers may exhibit resistance to quality initiatives, and why what seems to customers as cooperation can appear as unwelcome interference or even exploitation to suppliers. This is a question of great relevance to all those seeking to understand current business practice, and also to those seeking to bring about practical improvements in supply chain quality. Too much of the supply chain and quality literature assumes the issue of supplier's compliance with customer initiatives is unproblematic (unable to understand this sentence; experience suggests it is one of the major obstacles in developing the quality-oriented, integrated supply chain.

  7. Supplier Value of Customer-Initiated Product Development

    DEFF Research Database (Denmark)

    Sommer, Anita Friis; Dukovska-Popovska, Iskra; Steger-Jensen, Kenn

    2013-01-01

    Increased market demand and shortened product life cycles generate industrial customer requests for collaborative product development. Manufacture-to-stock suppliers struggle to manage the request process to obtain profitability. The purpose of this paper is to investigate if request management...... is profitable for suppliers, and to examine possible relations between profitability of requests and the requesting customer. Through a case study, request management is identified as a profitable process due to long-term accumulated profit from developed products. Request profitability is not identified...... as related to profitability or turnover of existing customers, and thus profitability of requests cannot be predicted based on these customer data. Results from a coupled interview study indicate that request management has a large potential for future exploitation, and an outline of the supplier value...

  8. A Hybrid Multiple Criteria Decision Making Model for Supplier Selection

    Directory of Open Access Journals (Sweden)

    Chung-Min Wu

    2013-01-01

    Full Text Available The sustainable supplier selection would be the vital part in the management of a sustainable supply chain. In this study, a hybrid multiple criteria decision making (MCDM model is applied to select optimal supplier. The fuzzy Delphi method, which can lead to better criteria selection, is used to modify criteria. Considering the interdependence among the selection criteria, analytic network process (ANP is then used to obtain their weights. To avoid calculation and additional pairwise comparisons of ANP, a technique for order preference by similarity to ideal solution (TOPSIS is used to rank the alternatives. The use of a combination of the fuzzy Delphi method, ANP, and TOPSIS, proposing an MCDM model for supplier selection, and applying these to a real case are the unique features of this study.

  9. Development of supplier evaluation model applying in nuclear power plants

    International Nuclear Information System (INIS)

    Wang Yonggang; Fang Chunfa

    2006-01-01

    It is essential for the safe and stable operations of Nuclear Power Plants that various resources in the supply chain are effectively managed. Supplier is a significant resource of nuclear entities serving as an extension of the operation process. Scientific and radiation evaluation of the performance of suppliers is of vital importance to an effective and high quality supply chain. This paper establishes an advance and practical supplier evaluation system that is applicable for the operational nuclear power plants, based on the analysis of the current operation status of Daya Bay Nuclear Power Station against its targeted objectives, the acquisition of relevant practices home and abroad and the benchmarking with advanced peers, in order to enhance the core competence of nuclear power plant. (authors)

  10. Weekly changes of power supplier - consequences for the network owner

    International Nuclear Information System (INIS)

    Graabak, Ingeborg

    1997-01-01

    In Norway, it is expected that owners of electric distribution networks will be required to make it possible for the customers to change supplier each week. This report examines what consequences such a requirement will have for the network owners. An inquiry among nine network owners shows that at present changing supplier implies a great deal of manual work on the part of the network owner since many do not have computer based tools adapted to handle the situation. If the number of weekly changes of suppliers does not increase beyond a few percent of the network owner's total number of customers over 1 to 3 years, the network owner can cope with the situation. However, if for some reason the increase becomes larger, many network owners will have great problems because they lack the necessary computer tools. 1 table

  11. Nuclear liability and research reactor fuel. A plant supplier's view

    International Nuclear Information System (INIS)

    Roegler, H.-J.; Hetzmann, A.

    2000-01-01

    Contracts on Research Reactors are normally entered into by the owner and - very often - later user and the supplier of such plants. They are not concluded by the fuel supplier, except fuel supplier and plant supplier are identical. Thus, the fuel supplier mostly has no direct influence into the contract negotiations and the clauses which are eventually agreed upon between the parties. So has any other subcontractor for any other system or component. Any such subsupplier can and will negotiate a subsidiary supply contract (subcontract) with the supplier of the plant. The supplier drafts the related clauses so as to pass on to the subsupplier as many risks out of his contracts as possible. The subsupplier, on the other hand, tries to protect himself, tries to limit the risks he takes over, e.g. to the worth of his subcontract maximum. A critical issue in such negotiations is those concerning the risks the supplier had to accept and the subsupplier, although he may be responsible later for the risk changing to reality; i.e. the occurrence of a loss, cannot be hold liable for in full because the subcontract limits his liability, e.g. to the subcontract value or a certain delay penalty. A typical example for this conflict are delays of the entire project caused by one subsupplier. A very specific case in this context is the so-called nuclear liability. Nuclear liability means being hold responsible for the consequences or damages originating from a nuclear event in the plant. Those consequences or damages may be suffered by third parties, which are neither the owner/operator nor the supplier and result in a liability to such party (third party liability). Several of the aspects below may be related to the nuclear liability issue: The supplier often has its registered office not in the country where the plant is; The supplier may have far bigger assets than the owner/operator. The legal system of the supplier's country may be more favourable for enforcing claims of

  12. The role of a multinational nuclear fuel fabrication supplier

    International Nuclear Information System (INIS)

    Beard, S.J.

    1987-01-01

    The author argues that international markets and multinational suppliers provide large benefits to utilities. It represents a long term commitment to the nuclear business that these companies will be able to supply nuclear technology on the long haul. The technology that is available around the world becomes available to everyone through the international markets and multinational suppliers. The increased experience base is seen as valuable in that errors that have been made or have not been made yet can be avoided through the transfer or experience. The security of supply is discussed as important to any utility that is operating a reactor

  13. Three echelon supply chain design with supplier evaluation

    DEFF Research Database (Denmark)

    Gandhi, Kanika; Jha, P. C.; Govindan, M.E., PhD.,, Kannan

    2014-01-01

    An effective supply chain management (SCM) facilitates companies to react to changing demand by swiftly communicating their needs to the supplier. Optimizing a supply chain (SC) performance is a key factor for success in long term SC relationships. Substantial information such as price, delivery...... in procurement and distribution in a supplier selection problem and a fuzzy model with two objectives is defined. The proposed model is a “fuzzy bi-objective mixed integer nonlinear” problem. To process the solution the fuzzy model is converted into crisp and further fuzzy goal programming approach is employed...

  14. Sources

    International Nuclear Information System (INIS)

    Duffy, L.P.

    1991-01-01

    This paper discusses the sources of radiation in the narrow perspective of radioactivity and the even narrow perspective of those sources that concern environmental management and restoration activities at DOE facilities, as well as a few related sources. Sources of irritation, Sources of inflammatory jingoism, and Sources of information. First, the sources of irritation fall into three categories: No reliable scientific ombudsman to speak without bias and prejudice for the public good, Technical jargon with unclear definitions exists within the radioactive nomenclature, and Scientific community keeps a low-profile with regard to public information. The next area of personal concern are the sources of inflammation. This include such things as: Plutonium being described as the most dangerous substance known to man, The amount of plutonium required to make a bomb, Talk of transuranic waste containing plutonium and its health affects, TMI-2 and Chernobyl being described as Siamese twins, Inadequate information on low-level disposal sites and current regulatory requirements under 10 CFR 61, Enhanced engineered waste disposal not being presented to the public accurately. Numerous sources of disinformation regarding low level radiation high-level radiation, Elusive nature of the scientific community, The Federal and State Health Agencies resources to address comparative risk, and Regulatory agencies speaking out without the support of the scientific community

  15. Pathogenesis and Treatment of Sole Ulcers and White Line Disease.

    Science.gov (United States)

    Shearer, J K; van Amstel, Sarel R

    2017-07-01

    Sole ulcers and white line disease are 2 of the most common claw horn lesions in confined dairy cattle. Predisposing causes include unbalanced weight bearing, and metabolic, enzymatic, and hormonal changes. The white line serves as the junction between the sole and axial and abaxial wall. It is vulnerable to trauma and separation, permitting organic matter to become entrapped. Colonization contributes to retrograde movement of the infection to the solar and perioplic corium, where an abscess forms resulting in pain and lameness. Successful treatment requires an orthopedic foot block to the healthy claw and corrective trimming of the lesion. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. British suppliers, American operators: a partnership for the future

    Energy Technology Data Exchange (ETDEWEB)

    Carr, W

    1988-04-01

    Britain is a major equipment supplier to the US coal industry. This paper discusses the differences in management styles and legislation of the two countries. However, blending the experiences and ideas of US operators and UK manufacturers can improve the coal industry of both countries particularly in areas of quality control, cost efficiency and productivity, innovation and product development.

  17. Buyer-supplier relationship management in the construction industry

    NARCIS (Netherlands)

    Bemelmans, Jeroen

    2012-01-01

    The aim of this PhD research is to gain insight into ways in which contractors could improve the management of, and the collaboration with, suppliers in order to increase their competitiveness. To achieve this aim, four research phases are conducted. Firstly, the current status of

  18. Reflections on Supplier Entry Barriers to Domestic Retail Markets

    DEFF Research Database (Denmark)

    Thomsen, Lotte; Kamau, Paul; McCormick, Dorothy

    This paper examines challenges for Kenyan food processing firms in the ‘modern’ domestic supermarket sector, and thereby distinguishes itself from an increasing number of studies that have explored developing country suppliers in global value chains (GVCs). The paper also differs by focusing on f...

  19. Managing Coopetition in Supplier Networks : A Paradox Perspective

    NARCIS (Netherlands)

    Wilhelm, Miriam; Sydow, Jörg

    2018-01-01

    Scholars in the field of supply chain management have started to embrace the idea of simultaneous cooperation and competition (“coopetition”) in supplier networks but have mainly looked at coopetition from a structural perspective. In this paper, we complement the structural view with a paradox

  20. Dealing with defaulting suppliers using behavioral based governance methods

    DEFF Research Database (Denmark)

    Prosman, Ernst Johannes; Scholten, Kirstin; Power, Damien

    2016-01-01

    Purpose: The aim of this paper is to explore factors influencing the effectiveness of buyer initiated Behavioral Based Governance Methods (BBGMs). The ability of BBGMs to improve supplier performance is assessed considering power imbalances and the resource intensiveness of the BBGM. Agency Theory...

  1. Managing supplier involvement in new product development: a portfolio approach

    NARCIS (Netherlands)

    Wynstra, Finn; ten Pierick, E.

    2000-01-01

    Supplier involvement in new product development projects has become an increasingly popular method for improving project effectiveness (product costs and quality) and project efficiency (development costs and time). One of the key issues in managing this involvement is determining which type of

  2. Regulatory Compliance in Multi-Tier Supplier Networks

    Science.gov (United States)

    Goossen, Emray R.; Buster, Duke A.

    2014-01-01

    Over the years, avionics systems have increased in complexity to the point where 1st tier suppliers to an aircraft OEM find it financially beneficial to outsource designs of subsystems to 2nd tier and at times to 3rd tier suppliers. Combined with challenging schedule and budgetary pressures, the environment in which safety-critical systems are being developed introduces new hurdles for regulatory agencies and industry. This new environment of both complex systems and tiered development has raised concerns in the ability of the designers to ensure safety considerations are fully addressed throughout the tier levels. This has also raised questions about the sufficiency of current regulatory guidance to ensure: proper flow down of safety awareness, avionics application understanding at the lower tiers, OEM and 1st tier oversight practices, and capabilities of lower tier suppliers. Therefore, NASA established a research project to address Regulatory Compliance in a Multi-tier Supplier Network. This research was divided into three major study efforts: 1. Describe Modern Multi-tier Avionics Development 2. Identify Current Issues in Achieving Safety and Regulatory Compliance 3. Short-term/Long-term Recommendations Toward Higher Assurance Confidence This report presents our findings of the risks, weaknesses, and our recommendations. It also includes a collection of industry-identified risks, an assessment of guideline weaknesses related to multi-tier development of complex avionics systems, and a postulation of potential modifications to guidelines to close the identified risks and weaknesses.

  3. Business intelligence gap analysis: a user, supplier and academic perspective

    NARCIS (Netherlands)

    Molensky, L.; Ketter, W.; Collins, J.; Bloemhof, J.M.; Koppel, van der H.

    2010-01-01

    Business intelligence (BI) takes many different forms, as indicated by the varying definitions of BI that can be found in industry and academia. These different definitions help us understand of what BI issues are important to the main players in the field of BI; users, suppliers and academics. The

  4. Supplier Choice Knowledge Support in the Supply Chain

    Directory of Open Access Journals (Sweden)

    Ekaterina Khitilova

    2015-01-01

    Full Text Available The paper focuses on the issue of choice of suppliers in the market environment. It discusses expert systems as modern methods of its computer support. The issue of supplier choice is presented and viewpoints for the formulation of the decision-making task introduced. The piece of writing furthermore pinpoints the expert character of the solution of this task, making use of the knowledge of experienced professionals. It introduces the principles of fuzzy oriented expert systems as a suitable solution of the task at hand. Language models of the expert systems formalise the high quality mental models of an experienced expert. The global decision-making task is split into partial tasks; the expert modules for their formalisation are integrated into the hierarchic structure. The paper presents the structures of language models and the implementation of the structure of expert systems in the MATLAB-Simulink program environment. Special attention is paid to the issue of supplier flexibility. The efficiency of the decision-making system is proven by the solution of a simulation exercise which represents the classification of two current and two newly contemplated suppliers with various characteristics. The results are analysed and commented on.

  5. Beyond the design fix - New industrialisation in contractor's supplier relationships

    DEFF Research Database (Denmark)

    Koch, Christian; Frödell, M.; Josephson, P.E.

    2010-01-01

    by the Erabuild program, this paper presents 3 cases of long term transformation of contractor- supplier relations as general contractors outsource and commence professionalising purchasing moving it from project purchasing into strategic purchasing. It is suggested that “new industrialisation” is a long term...

  6. Supplier selection problem: A fuzzy multicriteria approach | Allouche ...

    African Journals Online (AJOL)

    The purpose of this paper is to suggest a fuzzy multi-criteria approach to solve the supplier selection problem, an approach based on the fuzzy analytic hierarchy process and imprecise goal programming. To deal with decision-maker (DM) preferences, the concept of satisfaction function is introduced. The proposed ...

  7. Fuzzy Multicriteria ABC Supplier Classification in Global Supply Chain

    Directory of Open Access Journals (Sweden)

    Petar Kefer

    2016-01-01

    Full Text Available The determination of the optimal purchasing strategy in enterprise that is a part of global supply chain could be performed in two steps. In step one, a classification of potential suppliers is performed in order to determine the optimal portfolio of suppliers. This is delivered by using the fuzzy multicriteria proposed ABC classification method. Uncertainties in relative importance of criteria and their values are described by linguistic expressions. Modelling of linguistic expressions is based on the fuzzy sets theory. In the second step, ranking of optimal portfolio of suppliers is performed by using the modified ELECTRE method. The obtained results represent valuable input for determining the long time purchasing strategy and building partnership with the best suppliers. The developed two-step model is verified on real life data. The obtained results indicate good compliance with the opinions management in this type of industry. It is worth to mention that the proposed model can be easily extended and adopted to the analysis of other issues of management which could be applicable in different research areas.

  8. sources

    Directory of Open Access Journals (Sweden)

    Shu-Yin Chiang

    2002-01-01

    Full Text Available In this paper, we study the simplified models of the ATM (Asynchronous Transfer Mode multiplexer network with Bernoulli random traffic sources. Based on the model, the performance measures are analyzed by the different output service schemes.

  9. Probing of brain states in real-time: Introducing the ConSole environment

    Directory of Open Access Journals (Sweden)

    Thomas eHartmann

    2011-03-01

    Full Text Available Recent years have seen huge advancements in the methods available and used in neuroscience employing EEG or MEG. However, the standard approach is to average a large number of trials for experimentally defined conditions in order to reduce intertrial-variability, i.e. treating it as a source of "noise". Yet it is now more and more accepted that trial-to-trial fluctuations bear functional significance, reflecting fluctuations of "brain states" that predispose perception and action. Such effects are often revealed in a pre-stimulus period, when comparing response variability to an invariant stimulus. However such offline analyses are disadvantageous as they are correlational by drawing conclusions in a posthoc-manner and stimulus presentation is random with respect to the feature of interest. A more direct test is to trigger stimulus presentation when the relevant feature is present. The current paper introduces ConSole (CONstance System for OnLine Eeg, a software package capable of analyzing ongoing EEG / MEG in real-time and presenting auditory and visual stimuli via internal routines. Stimulation via external devices (e.g. TMS or third-party software (e.g. Psyscope X is possible by sending TTL-triggers. With ConSole it is thus possible to target the stimulation at specific brain-states. In contrast to many available applications, ConSole is open-source. Its modular design enhances the power of the software as it can be easily adapted to new challenges and writing new experiments is an easy task. ConSole is already pre-equipped with modules performing standard signal processing steps. The software is also independent from the EEG / MEG system, as long as a driver can be written (currently 2 EEG systems are supported. Besides a general introduction, we present benchmark data regarding performance and validity of the calculations used, as well as three example applications of ConSole in different settings. ConSole can be downloaded at: http://console-kn.sf.net.

  10. pigmentation of the sole of the foot in rhodesian africans

    African Journals Online (AJOL)

    1971-01-23

    Jan 23, 1971 ... basal layer. (Photo by courtesy of Dr C. M. D. Ross.) Fig. 8. From a biopsy of a grade III area on the sole of the foot a section shows, apart from proliferated melanocytes in the basal layer, isolated pigmented cells extending through the stratum malpighii to the stratum granulosum above it, (Photo by courtesy ...

  11. Deaths among West African dwarf goats fed sole Dactyladaenia barteri

    African Journals Online (AJOL)

    Dactyladaema barteri is an important shrub utilized in fallow development and as a much-preferred ruminant browse by local farmers in Nigeria. We report the death of two 12 – 15 months old West African Dwarf (WAD) goats used in a digestibility trail with D. barteri as sole feed and in a mixed browse - grass diet in the ...

  12. Degloved foot sole successfully reconstructed with split thickness skin grafts

    NARCIS (Netherlands)

    Janssens, Loes; Holtslag, Herman R.; Schellekens, Pascal P A; Leenen, Luke P H

    2015-01-01

    Introduction The current opinion is that split thickness skin grafts are not suitable to reconstruct a degloved foot sole. The tissue is too fragile to carry full bodyweight; and therefore, stress lesions frequently occur. The treatment of choice is the reuse of the avulsed skin whenever possible,

  13. Recognition and Accountability: Sole Parent Postgraduates in University Conditions

    Science.gov (United States)

    Hook, Genine A.

    2015-01-01

    This paper aims to examine some of ways sole parents sought recognition as postgraduate students in Australian universities. Judith Butler's theory of recognition notes that recognition is always partial and any account we give of ourselves must be given to another. Participants articulated that supervisors were critical in the process of…

  14. Folic acid supplementation is not the sole factor in determining ...

    African Journals Online (AJOL)

    Folic acid supplementation is not the sole factor in determining neural tube defects: The possible role of autoantibodies. Keat Wei Loo, Siew Hua Gan. Abstract. Neural tube defects (NTDs) are severe but common congenital malformations. Neonates who suffer from NTDs may experience long-term complications throughout ...

  15. ELECTROCHEMICAL TECHNOLOGIES FOR OBTAINING MOULDS FOR SOLES OF SHOES

    Directory of Open Access Journals (Sweden)

    Cornelia LUCA

    2013-05-01

    Full Text Available The paper presents contributions in the designing of some electrochemical technologiesfor the manufacturing of the moulds used in the footwear soles obtaining. There are presented a fewmethods for the moulds obtaining, using electro-deposit processes. There are presented thetechnological phases of the obtaining process of the electrolytes and electrodes preparing and thetechnological stages of the moulds manufacturing.

  16. Yield Performance of Some Cowpea Varieties under Sole and ...

    African Journals Online (AJOL)

    Nekky Umera

    The mean number of pod/plant, pod weight and seed yield of the cowpea varieties ... pattern of peasant farmers in Nigeria. Some of the advantages ... in maize-pigeon pea intercropping system as compared to sole crops. While intercropping ...

  17. Analisis Pemilihan Supplier Pada Komponen Lamp Cord Assy Untuk Speedometer Honda Blade Di PT. Indonesia Nippon Seiki

    OpenAIRE

    Sundana, Sambas; Sari, Yossy Yulia

    2014-01-01

    Dalam memenuhi kebutuhan speedometer PT. Indonesia Nippon Seiki bekerja samadengan supplier untuk mensuplai bahan baku nya. Bagian pembelian PT. IndonesiaNippon Seiki bertugas untuk melakukan proses pembelian dan pemilihan supplier yangtepat. Pemilihan supplier merupakan salah satu hal yang penting dalam aktivitaspembelian bagi Perusahaan. Penelitian ini ditulis dalam rangka meneliti bagaimana caramemilih supplier. Metode yang digunakan untuk pemilihan supplier adalah AHP(Analytical Hierarchy...

  18. CORRELATED ANALYSIS OF CLIENT-CREDIT COST WITH THE ONE OF SUPPLIER - CREDIT COST

    Directory of Open Access Journals (Sweden)

    MIRELA MONEA

    2012-01-01

    Full Text Available The given client-credit has associated several types of costs. If a company gives client-credit for a certain period of time, then it will have to finance its activity from other sources. Another aspect is the one related to the size of allotted sum. The sum that must be covered does not equal the turnover. The impact on financing the operating cycle is found usually only under the form of expenses which are made up of variable costs (because amortization must not be paid, the profit is included in the price. Thus, the sum which must be covered is not related to the non-cashed turnover from the client-credit, but only to variable costs. This will be the sum that must be covered from the financing sources. Supplier-credit is a source attracted, usually it has no cost.

  19. Profiles of Major Suppliers to the Automotive Industry : Vol. 3. Plastics, Glass and Fiberglass Suppliers to the Automotive Industry

    Science.gov (United States)

    1982-08-01

    This study summarizes extensive information collected over a two-year period (October 1978 to 1980) on suppliers of parts and components, materials, and machine tools to the automotive industry in the United States. The objective of the study was to ...

  20. Modern methods of evaluation existing suppliers and suppliers selected by customer for small and medium-sized companies

    Directory of Open Access Journals (Sweden)

    Marie Jurová

    2010-01-01

    Full Text Available On existing conditions on global market (almost identical quality, almost identical purchasing values companies have to definite the total rating of importance of evaluative criteria. In post-crisis period the problem of suppliers’ evaluation is one of the biggest, because companies had to use all resources and all possibilities to develop their own business. Many authors wrote about collaborative planning and warehousing as one of possibilities to optimization work inside supply chain. For this paper define small and medium-sized enterprises (SME as enterprises with the size of maximum 250 em­ployers. In literature was read we couldn’t find information about own system of suppliers evaluation for small and medium-sized enterprises. SME can have some different types of business and in this case need the universal system of eva­lua­tion. The research of this paper is oriented on small and medium-sized enterprises with different types of business. The new theoretical universal method of calculation for evaluation existing suppliers for small and medium-sized enterprises will present in this paper. This theoretical method is based on average values. This method includes traditional evaluative criteria (quality, delivery time and other (mobility of supplier, possibilities of new level of partnership. This method of evaluation can not be used for continual manufacture. New method can improve the total evaluation of supplier in small and medium-sized enterprises.

  1. A simplified, result oriented supplier performance management system testing framework for SME

    Directory of Open Access Journals (Sweden)

    Satya Parkash Kaushik

    2014-06-01

    Full Text Available Background: Supplier performance management continues to be a significant concern for small & medium enterprises (SME. How can small & medium enterprises better position themselves to check and sustain actual supplier performance improvement? A key framework is the establishment of a value-added supplier performance audit program that places significant emphasis on supplier performance controls. A value-added supplier audit program can help SME mitigate business and regulatory risk while reducing the cost of poor quality (COPQ. Thus a good supplier performance audit program is the cornerstone of supplier performance management integrity. Methods: By acknowledging and addressing the challenges to an effective supplier Performance Audit program, this paper proposes an objective framework of supplier performance audit program, built on a strong, yet versatile statistical methodology - Analysis of variance (ANOVA. This performance audit framework considers process definition, standardization, review of the contemporary literature on ANOVA & its practical application in supplier performance scorecard of one of the reputed Sports Goods Industry in India. Results and conclusions: The advantages of this framework are that: it simultaneously considers multiple supplier performance in multiple time frames and effectively identifies the differences across the suppliers in terms of their performance. Through this framework the organization will be able to increase the odds of performing a predictable and successful implementation of a value-added supplier performance audit.

  2. Identifying the 'right' supplier for module developments-a cross-industrial case analysis

    NARCIS (Netherlands)

    Eggers, Justus Erich; Hofman, Erwin; Schiele, Holger; Holschbach, Elmar

    2017-01-01

    Relational view argues that buying companies should integrate supplier resources in new product development (NPD) projects to realise competitive advantages. Due to decoupling of modules and the associated opportunity to allocate development activities to upstream suppliers, modular product

  3. On the relationship between supplier integration and time-to-market

    NARCIS (Netherlands)

    Perols, J.; Zimmermann, C.; Kortmann, S.

    2013-01-01

    Recent operations management and innovation management research emphasizes the importance of supplier integration. However, the empirical results as to the relationship between supplier integration and time-to-market are ambivalent. To understand this important relationship, we incorporate two major

  4. Management of Complex Industrial Supplier Relations - a Case of Customer Attractiveness

    DEFF Research Database (Denmark)

    Ellegaard, Chris

    relationship management is proposed – the concept of Customer Attractiveness. Customer Attractiveness is founded on the revised understanding of the supplier relationship management task and focuses on influencing suppliers by being an attractive customer, hereby motivating the necessary commitment to long......Companies are increasingly relying on suppliers when developing and manufacturing industrial products. Therefore the supplier relationships of the company need to be managed. This dissertation looks at existing theoretical approaches to supplier relationship management. By studying a number...... of supplier relationships of the company Danfoss Drives, an alternative understanding of the supplier relationship management task is proposed. The case study methodology forms the basis for the applied research design. The alternative understanding sees the management task as one of influencing suppliers...

  5. Supplier Selection Process Using ELECTRE I Decision Model and an Application in the Retail Sector

    Directory of Open Access Journals (Sweden)

    Oğuzhan Yavuz

    2013-12-01

    Full Text Available Supplier selection problem is one of the main topic for the today’s businesses. The supplier selection problem within the supply chain management activities is very important for the businesses, particularly operating in the retail sector. Thus, in this study, the supplier selection problem was discussed in order of importance between energy drinks suppliers of food business in the retail sector. Costs, delivery, quality and flexibility variables were used to select suppliers, and ELECTRE I Method, one of the multiple decision methods, was used to ranking suppliers according to this variables. Which suppliers are more important for the food company was determined by ranking suppliers according to computing net superior values and net inferior values. Results obtained werepresented in tables and certain steps

  6. Perceptions of technology uncertainty and the consequences for performance in buyer-supplier relationships

    NARCIS (Netherlands)

    Oosterhuis, M.; van der Vaart, T.; Molleman, E.

    2011-01-01

    In this paper, we investigate how buyers' and suppliers' distinct perceptions of technology uncertainty affect the relationship between communication frequency and supplier performance. Information processing theory suggests that a fit is desirable between perceived environmental uncertainty and the

  7. Multi criteria decision making approaches for green supplier evaluation and selection

    DEFF Research Database (Denmark)

    Govindan, Kannan; Rajendran, S.; Sarkis, J.

    2015-01-01

    A large and growing body of literature to supplier evaluation and selection exists. Literature on green supplier evaluation that considers environmental factors are relatively limited. Recently, in supply chain management decision making, approaches for evaluating green supplier performance have ...... us to identify improvements for green supplier selection process and possible future directions.......A large and growing body of literature to supplier evaluation and selection exists. Literature on green supplier evaluation that considers environmental factors are relatively limited. Recently, in supply chain management decision making, approaches for evaluating green supplier performance have...... used both qualitative and quantitative environmental data. Given this evolving research field, the goal and purpose of this paper is to analyze research in international scientific journals and international conference proceedings that focus on green supplier selection. We propose the following...

  8. Supplier Selection for Food Industry: A Combination of Taguchi Loss Function and Fuzzy Analytical Hierarchy Process

    OpenAIRE

    Renna Magdalena

    2012-01-01

    Supplier selection is an important part of supply chain management process by which firms identify, evaluate, and establish contracts with suppliers. Deciding the right supplier can be a complex task. As such, various criteria must be taken into account to choose the best supplier. This study focused on the supply in the packaging division of a food industry in Denpasar-Bali. A combination of Taguchi Loss Function and fuzzy-AHP (Analytical Hierarchy Process Fuzzy Linear Programming) was used ...

  9. Supplier relationship management – anathema for the South African public procurement sector

    OpenAIRE

    Micheline J. Naude; Intaher M. Ambe; René Kling

    2013-01-01

    The public sector is recognised as being one of the most important customer groups for many suppliers and service providers because of the volume of public expenditure. Supplier relationship management (SRM) is a necessary tool on which businesses in the public and private sectors rely. However, in the South African public sector, despite the intention to boost service delivery through efficient and effective supplier-management processes, the development of sound supplier relationships is a ...

  10. A Fuzzy Decision Making Approach for Supplier Selection in Healthcare Industry

    OpenAIRE

    Zeynep Sener; Mehtap Dursun

    2014-01-01

    Supplier evaluation and selection is one of the most important components of an effective supply chain management system. Due to the expanding competition in healthcare, selecting the right medical device suppliers offers great potential for increasing quality while decreasing costs. This paper proposes a fuzzy decision making approach for medical supplier selection. A real-world medical device supplier selection problem is presented to illustrate the application of the proposed decision meth...

  11. Mirror, mirror on the wall... Let suppliers guide you towards improvement

    NARCIS (Netherlands)

    Weele, van A.J.; Rozemeijer, F.A.; Capaldo, G.; Esposito, E.; Lo Sorto, C.; Raffa, M.

    1998-01-01

    Suppliers may have a major impact on a firm's performance. The limitations of "traditional" buyer-supplier relationships are becoming more widely recognised. Co-operative relationships between suppliers and customers are attracting a lot of attention in today's business environment. Eurotel, a large

  12. Supplier selection based on improved MOGA and its application in nuclear power equipment procurement

    International Nuclear Information System (INIS)

    Yan Zhaojun; Wang Dezhong; Zhou Lei

    2007-01-01

    Considering the fact that there are few objective and available methods supporting the supplier selection in nuclear power equipment purchasing process, a supplier selection method based on improved multi-objective genetic algorithm (MOGA) is proposed. The simulation results demonstrate the effectiveness and efficiency of this method for the supplier selection in nuclear power equipment procurement process. (authors)

  13. 49 CFR 583.10 - Outside suppliers of passenger motor vehicle equipment.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Outside suppliers of passenger motor vehicle... CONTENT LABELING § 583.10 Outside suppliers of passenger motor vehicle equipment. (a) For each unique type of passenger motor vehicle equipment for which a manufacturer or allied supplier requests information...

  14. 49 CFR 583.11 - Allied suppliers of passenger motor vehicle equipment.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Allied suppliers of passenger motor vehicle... CONTENT LABELING § 583.11 Allied suppliers of passenger motor vehicle equipment. (a) For each unique type of passenger motor vehicle equipment which an allied supplier supplies to the manufacturer with which...

  15. Supplier's involvement and success of radical new product development in new ventures

    NARCIS (Netherlands)

    Song, Michael; Di Benedetto, Anthony

    2008-01-01

    Supplier involvement is essential to a new venture seeking to develop a radical innovation. Despite this, prior literature has not adequately addressed supplier involvement in radical innovation, nor what the antecedents to increased supplier involvement are. We build and test a conceptual model of

  16. Information asymmetries as antecedents of opportunism in buyer-supplier relationships: testing principal-agent theory

    NARCIS (Netherlands)

    Steinle, Claus; Schiele, Holger; Ernst, Tanja

    2014-01-01

    Purpose: A severe problem in supplier selection refers to moral hazard: suppliers not behaving in the expected way once contracted. Principal-agent theory could provide insights on how to reduce this problem. Because buyer–supplier relationships can be interpreted as principal-agent situations, the

  17. Supplier development and cost management in South-East Asia - Results from a field study

    NARCIS (Netherlands)

    Wouters, Marc; van Jarwaarde, Ewout; Groen, B.A.C.

    2007-01-01

    This paper is about supplier development when international companies have production sites in Southeast Asia and look for opportunities to switch from international suppliers to local suppliers. We conducted a field study involving site visits to companies in Thailand and Vietnam, and interviews at

  18. Quality assurance inspections in the transportation packaging supplier industry

    International Nuclear Information System (INIS)

    Jankovich, J.P.

    1991-01-01

    In this paper the quality assurance inspections of the transportation packaging supplier industry, conducted by the U.S. Nuclear Regulatory Commission (NRC) on a routine basis since 1989 are discussed. The term supplier is used to include designers, fabricators, and distributors that hold NRC approved Quality Assurance Programs and Certificates of Compliance for packagings to transport radioactive materials. The objective of the inspections is to provide assurance that transportation packagings are fabricated and procured in accordance with 10 CFR Parts 21 and 71 requirements. The inspections are conducted in a systematic and comprehensive manner, utilizing uniform inspection techniques in order to assure uniformity and comparability. During the April 1989 and May 1991 period approximately 21 inspections were conducted by the Transportation Branch, Office of Nuclear Material Safety and Safeguards of the NRC. The majority of the findings were identified in the areas of quality assurance procedures, control of special processes (e.g. welding, radiography), and maintenance of QA records

  19. Fuzzy Axiomatic Design approach based green supplier selection

    DEFF Research Database (Denmark)

    Kannan, Devika; Govindan, Kannan; Rajendran, Sivakumar

    2015-01-01

    proposes a multi-criteria decision-making (MCDM) approach called Fuzzy Axiomatic Design (FAD) to select the best green supplier for Singapore-based plastic manufacturing company. At first, the environmental criteria was developed along with the traditional criteria based on the literature review......Abstract Green Supply Chain Management (GSCM) is a developing concept recently utilized by manufacturing firms of all sizes. All industries, small or large, seek improvements in the purchasing of raw materials, manufacturing, allocation, transportation efficiency, in curbing storage time, importing...... responsible in addition to being efficiently managed. A significant way to implement responsible GSCM is to reconsider, in innovative ways, the purchase and supply cycle, and a preliminary step would be to ensure that the supplier of goods successfully incorporates green criteria. Therefore, this paper...

  20. ATLAS rewards two Japanese suppliers of major detector components.

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    The ATLAS supplier award in recognition of excellence has just been attributed to Kawasaki Heavy Industries, who produced the liquid-argon barrel cryostat. Kawasaki received its award in Hall 189 on the Meyrin site, where the cryostat is currently located. Toshiba Corporation's award for the superconducting central solenoid was presented two months ago at the Toshiba headquarters in Japan. Photo 01: P. Pailler, project leader for the ATLAS liquid-argon cryostats, addressing the Kawasaki delegation. Photo 04: H. Oberlack, project leader for the ATLAS liquid-argon system, addressing the Kawasaki delegation. Photo 11: P. Jenni (left), ATLAS Collaboration spokesperson, presenting the ATLAS supplier award for the barrel cryostat for the liquid-argon calorimeter to Mr. S. Nose, General Manager of Kawasaki Heavy Industries Ltd. Photo 18: J. Sondericker (left), liquid-argon barrel cryostat project engineer (BNL), presenting Mr. Nose (Kawasaki) an award from Brookhaven for the barrel cryostat for the ATLAS liquid-argo...

  1. Building partnerships with suppliers as a new trend in management

    Directory of Open Access Journals (Sweden)

    Weiss Elżbieta

    2016-06-01

    Full Text Available The main objective of the paper is to show the importance of building partnerships with suppliers, and to present the results of research verifying the following hypothesis: Most of the furniture industry companies in Lower Silesia take into account the partnership relations with suppliers in their formulated business strategy. The study was carried out using CATI method and included a research sample consisting of 110 enterprises of Lower Silesia. Enterprises were selected using the purposive sampling method. Selection of companies was based on factors such as: regional differences, basic products and the activity period, size organizational and legal form, basic profile of activity. Interviews with companies’ managers were based on an anonymous survey questionnaire. A time frame of research included 2 phases: phase I – exploratory phase: February – May 2013 and phase II – the essential phase: up to early 2014.

  2. Evaluating supplier quality performance using fuzzy analytical hierarchy process

    Science.gov (United States)

    Ahmad, Nazihah; Kasim, Maznah Mat; Rajoo, Shanmugam Sundram Kalimuthu

    2014-12-01

    Evaluating supplier quality performance is vital in ensuring continuous supply chain improvement, reducing the operational costs and risks towards meeting customer's expectation. This paper aims to illustrate an application of Fuzzy Analytical Hierarchy Process to prioritize the evaluation criteria in a context of automotive manufacturing in Malaysia. Five main criteria were identified which were quality, cost, delivery, customer serviceand technology support. These criteria had been arranged into hierarchical structure and evaluated by an expert. The relative importance of each criteria was determined by using linguistic variables which were represented as triangular fuzzy numbers. The Center of Gravity defuzzification method was used to convert the fuzzy evaluations into their corresponding crisps values. Such fuzzy evaluation can be used as a systematic tool to overcome the uncertainty evaluation of suppliers' performance which usually associated with human being subjective judgments.

  3. Customer-supplier alliances: A co-engineering process

    International Nuclear Information System (INIS)

    Ouellet, P.

    1996-01-01

    The 90's are forcing companies to review all aspects of doing business. Partnerships, alliances and other inter-company relationships are now a matter of course. This paper explores an alternate method currently utilized by one of the major US oil pipelines to acquire products and/or services. The method stresses the formation of long-term alliances to the mutual benefit of both the supplier and the end user companies. The paper uses as an example a SCADA system currently being implemented for this oil company. It outlines the method and explains the pitfalls that have been encountered. As well, the potential benefits to both the supplier and the customer are summarized

  4. Automating radiochemistry: Considerations for commerical suppliers of devices

    International Nuclear Information System (INIS)

    Schmidt, D.G.

    1993-01-01

    The fundamental decision to automate a particular radiochemical synthesis for in house use depends primarily on the demand for the compound and the total number of studies to be carried out with that compound. For a commercial supplier of automated chemistry systems, much more goes in to the decision to design, develop and produce a particular automated chemistry system. There is a dramatic difference in design effort between an industrial environment and an academic environment. An in house system must be built only once and needs only to incrementally simplify the synthesis process. A commercial product must: have reasonable manufacturing costs; be easy to use; be aesthetically pleasing; be easy to install and service; be functionally integral with other equipment sold by the manufacturer; be marketable within the regulatory environment; address radiation safety issues. This paper discusses issues that guide commercial suppliers in the formation of their product lines

  5. ATLAS Rewards Russian Supplier for Scintillating Tile Production

    CERN Multimedia

    2001-01-01

    At a ceremony held at CERN on 30 July, the ATLAS collaboration awarded Russian firm SIA Luch from Podolsk in the Moscow region an ATLAS Suppliers Award. This follows delivery by the company of the final batch of scintillating tiles for the collaboration's Tile Calorimeter some six months ahead of schedule.   Representatives of Russian firm Luch Podolsk received the ATLAS Suppliers Award in the collaboration's Tile Calorimeter instrumentation plant at CERN on 30 July. In front of one Tile Calorimeter module instrumented by scintillating tiles are (left to right) IHEP physicists Evgueni Startchenko and Andrei Karioukhine, Luch Podolsk representatives Igor Karetnikov and Yuri Zaitsev, Tile Calorimeter Project Leader Rupert Leitner, ATLAS spokesperson Peter Jenni, and CERN Tile Calorimeter group leader Ana Henriques-Correia. Scintillating tiles form the active part of the ATLAS hadronic Tile Calorimeter, which will measure the energy and direction of particles produced in LHC collisions. They are emb...

  6. Guidelines for performance-based supplier audits (NCIG-16)

    International Nuclear Information System (INIS)

    Lauderdale, J.R.; Mattu, R.K.; Roman, W.S.

    1990-06-01

    This document provides guidelines for planning and conducting performance-based audits of suppliers of items used in nuclear power plants. A common purpose of audits is to provide a basis for confidence in the supplier's controls to ensure that products received will perform their intended functions satisfactorily. Performance-based audits offer means of raising the level of confidence. This confidence comes from evaluation of important features of the product and the processes and activities that produce it. This document does not add requirements to those in existing codes, standards, or regulations. The guidance herein is intended to complement the information in existing industry standards and practices. Performance-based audits are one element of an effective procurement program. A companion EPRI/NCIG document, EPRI NP-6629, Guidelines for the Procurement and Receipt of Items for Nuclear Power Plants (NCIG-15), provides guidance for other elements of an effective procurement program

  7. The internal competitor: Buyer motives and external supplier marketing strategies

    DEFF Research Database (Denmark)

    Mols, Niels Peter; Sloth, Jacob Lerche; Thrane, Claus

    Abstract Purpose of the paper and literature addressed: The purpose of this paper is to identify buyer motives for supporting internal competitors and to suggest relevant marketing strategy elements for external suppliers confronting these internal competitors. Research method: With basis...... in a literature review we identify different buyer motives for choosing to combine external suppliers with internal production, i.e., an internal competitor. For each buyer motive, possible marketing strategies are identified and briefly discussed. Research findings: The paper describes different buyer motives...... relevant buyer motives, the existence of different buyer motives suggests that these buyers should be targeted with different marketing strategies. For each buyer motive, possible marketing strategies are suggested and briefly discussed. Thus, for each buyer motive it is briefly discussed (1) how...

  8. Dual structures for the sole-proprietorship firm

    OpenAIRE

    Chambers, Robert G.; Quiggin, John

    2003-01-01

    This paper presents a dual representation of firm-level and market-level equilibrium behavior for a sole proprietorship economy with competitive and frictionless financial markets and stochastic production opportunities in a two-period setting. The dual equilibrium model is used to state conditions for the firms' production choices to be independent of their risk preferences in equilibrium. These conditions entail Pareto optimality, but do not require either that the firm's consumption choice...

  9. A Mole in the Sole: Case Report on Eccrine Poroma

    Directory of Open Access Journals (Sweden)

    Dr. Arnab Ghosh

    2007-01-01

    Full Text Available Eccrine poroma is a benign tumor which arises from the intraepidermal portion of the eccrine sweat glands. 81 year old diabetic grandma worried about her persistently uncontrolled blood sugar owing to a painless mole in the sole of right foot for 2 years. Excisional biopsy revealed a sweat duct benign eccrine poroma. A relationship with diabetes mellitus could not be clearly established in this case.

  10. Effect of ski mountaineering track on foot sole loading pattern.

    Science.gov (United States)

    Haselbacher, Matthias; Mader, Katharina; Werner, Maximiliane; Nogler, Michael

    2014-09-01

    Ski mountaineering is becoming a popular sport. The ascending techniques (tracks) can be divided into 3 different groups: flat field, direct ascent, and traversing. This study examines the relationship between different mechanical loads on the foot and the 4 different mountaineering ascending techniques. All subjects used the same pair of ski boots and the same skis while performing the 4 different ascending techniques. An in-shoe dynamic pressure measuring system was used to measure the mechanical load on the foot soles of each ski mountaineer. The foot sole was divided into 6 anatomic sections to measure the different loads in each section. Thirteen men with an average age of 29 years were enrolled in the study. The results showed small, not significant differences in the mechanical foot load in the flat field or in the direct ascent. The average mechanical foot load was highest on the valley side foot while traversing (179 kPa to 117 kPa). The higher load forces were in the medial ball of the foot and the longitudinal aspect of the foot side closer to the hill. The higher impact placed on the valley side foot and the concentration of force placed on the medial ball of the valley side foot suggested the influence of the track on the load pattern of the foot sole. This higher impact may result in upward forces that affect the force distribution in the ankle and knee joints. Copyright © 2014. Published by Elsevier Inc.

  11. Improving Quality of Shoe Soles Product using Six Sigma

    Science.gov (United States)

    Jesslyn Wijaya, Athalia; Trusaji, Wildan; Akbar, Muhammad; Ma’ruf, Anas; Irianto, Dradjad

    2018-03-01

    A manufacture in Bandung produce kind of rubber-based product i.e. trim, rice rollers, shoe soles, etc. After penetrating the shoe soles market, the manufacture has met customer with tight quality control. Based on the past data, defect level of this product was 18.08% that caused the manufacture’s loss of time and money. Quality improvement effort was done using six sigma method that included phases of define, measure, analyse, improve, and control (DMAIC). In the design phase, the object’s problem and definition were defined. Delphi method was also used in this phase to identify critical factors. In the measure phase, the existing process stability and sigma quality level were measured. Fishbone diagram and failure mode and effect analysis (FMEA) were used in the next phase to analyse the root cause and determine the priority issues. Improve phase was done by designing alternative improvement strategy using 5W1H method. Some improvement efforts were identified, i.e. (i) modifying design of the hanging rack, (ii) create pantone colour book and check sheet, (iii) provide pedestrian line at compound department, (iv) buying stop watch, and (v) modifying shoe soles dies. Some control strategies for continuous improvement were proposed such as SOP or reward and punishment system.

  12. Households' switching behavior between electricity suppliers in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Ek, Kristina; Soederholm, Patrik [Economics Unit, Luleaa University of Technology, 971 87 Luleaa (Sweden)

    2008-12-15

    The overall purpose of this paper is to analyze the factors affecting households' decisions to: (a) switch to a new electricity supplier; and (b) actively renegotiate the electricity contract with the prevailing supplier. The study is based on 536 survey responses from Swedish households and they are analyzed econometrically using probit regression techniques. The analysis is based on a theoretical framework, which embraces both economic and psychological motives behind household decision-making. The results show that households that anticipate significant economic benefits from choosing a more active behavior are also more likely to purse this, while those with smaller potential gains (e.g., households without electric heating) are less likely to change supplier and/or renegotiate their contracts. The impact of overall electricity costs and knowledge about these is particularly important for the latter decision, while respondents that perceive relatively high search and information costs are less likely to switch to an alternative electricity supplier. Moreover, constraints on time, attention, and the ability to process information, may lead to optimizing analyses being replaced by imprecise routines and rules of thumb, and the benefits of the status quo appear to represent one of those simplifying rules. This also opens up for other influences on households' activity such as social interaction and media discourses that raise the attention level. Our results show that these influences are more likely to affect households' choice to switch to new service providers, i.e., the one area of the two investigated here that put the most demand on people's ability to search for and process information. (author)

  13. CERN recognizes LHC suppliers with Golden Hadron awards

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    The recipients of CERN's first 'Golden Hadron' awards for outstanding supplier performance are the Russian institute BINP, the Belgian firm Cockerill-Sambre and the US company Wah-Chang. LHC project leader Lyn Evans (centre) with Santo Comel of Cockerill-Sambre (left) and Lynn Davis of Wah-Chang. The third recipient, Alexander Skrinsky of the Budker Institute, was unable to attend the ceremony and will collect the Institute's award in September.

  14. A supplier selection strategy within the Malaysian telecommunications industry

    OpenAIRE

    Sharif, A M; Abdul-Rahim, S; Gallear, D; Irani, Z

    2009-01-01

    The telecommunication industry in Malaysia has grown rapidly over the last 15 years, with effective supply chain management becoming increasing important within the sector. A multitude of providers and part owned Malaysian government companies, vendors and suppliers are involved in generating and creating value-adding products and services within this sector (across wireless, wireline, broadband business and consumer lines of business). This paper describes key challenges facing a major telec...

  15. Antecedents and Consequences of Supplier Performance Evaluation Efficacy

    Science.gov (United States)

    2016-04-30

    302–314. Cannon, J. P., & Perreault, W. D., Jr. (1999). Buyer–seller relationships in business markets. Journal of Marketing Research , 36, 439–460...some antecedents of opportunism in a marketing channel. Journal of Marketing Research , 21(3), 278–289. Kelman, S. (2010). Three ways to revitalize...supplier fairness on vulnerable resellers. Journal of Marketing Research , 32(1), 54–65. Lambe, J. C., Wittmann, C. M., & Spekman, R. E. (2001

  16. An exploratory study of close supplier-manufacturer relationships

    OpenAIRE

    Goffin, Keith; Lemke, Fred; Szwejczewski, Marek

    2006-01-01

    Close relationships with selected suppliers can enable manufacturers to reduce costs, improve quality and enhance new product development. Although the advantages of close co-operation are widely acknowledged in the literature, the specific attributes of such relationships are not well understood. To address this gap, 39 managers responsible for purchasing were interviewed using a technique from psychology, which is particularly effective at uncovering the characteristics of...

  17. Analysis of QA audit checklist for equipment suppliers

    International Nuclear Information System (INIS)

    Tian Xuehang

    2012-01-01

    Eleven aspects during the equipment manufacturing by the suppliers, including the guidelines and objectives of quality assurance, management department review, document and record control, staffing and training, design control, procurement control, control of items, process control, inspection and testing control, non-conformance control, and internal and external QA audit, are analyzed in this article. The detailed QA audit checklist on these above mentioned aspects are described and the problems found in real QA audit are listed in this article. (authors)

  18. Liability of German suppliers and service providers for foreign projects

    International Nuclear Information System (INIS)

    Raetzke, Christian

    2017-01-01

    Main topic is the question of the extent to which German plant constructors, suppliers, engineering consultants, experts or operators expose themselves to liability for the delivery of their products and services abroad. In principle, in almost all nuclear power countries, liability is channelled to the operator; suppliers and service providers are exempted from liability. However, there are conceivable cases in which this principle does not apply. This can occur, for example, if a major accident is assumed to have an impact on neighbouring countries of the country of destination; here, depending on the applicable law, the German supplier or service provider could be ordered to pay for damages. The risk of liability remaining in this way can be reduced if necessary by means of an exemption clause in the supply contract. The regulation of the operator's recourse to the contractor, insofar as the latter is responsible for the accident, and the - controversial -question of to what extent damage to the plant itself gives rise to claims for damages by the operator against the contractor are also discussed.

  19. ATLAS Supplier Award for the ECT Vacuum Vessels

    CERN Multimedia

    Jenni, P

    On 12 February the Netherlands firm Schelde Exotech was awarded the ATLAS Supplier Award for the construction of the two vacuum vessels for the ATLAS End- Cap Toroid (ECT) magnets. ATLAS Supplier Award ceremonies have now become something of a tradition. For the third consecutive year, ATLAS has given best supplier awards for the most exceptional contributors to the construction of the detector. The Netherlands firm Schelde Exotech has just received the award for the construction of the two vacuum vessels for the ECTs. With a diameter of 11 metres and a volume of 550 cubic metres, the ECT vacuum vessels are obviously impressive in scale. They consist of large aluminium plates and a stainless steel central bore tube. In order to obtain the required undulations, the firm had to develop a special assembly and welding technique. Despite the chambers' imposing size, a very high degree of precision has been achieved in their geometry. Moreover, the chambers, which were delivered in July 2002 to CERN, were built i...

  20. COLLABORATION BETWEEN SMALL RETAIL STORES AND SUPPLIERS OF FOOD PRODUCTS

    Directory of Open Access Journals (Sweden)

    Lenka Branska

    2017-01-01

    Full Text Available Small grocery stores are forced to look for ways to retain customers. One possibility is through collaboration with suppliers. Therefore, the aim of this research was to determine the forms of collaboration between small Czech grocery stores and suppliers and to specify the differences in this collaboration depending on store location and the possible affiliation of the store with a retail chain. To achieve this goal, quantitative research was carried out among 65 Czech retail stores using face-to-face interviews with predetermined questions. Collaboration was assessed on the basis of four criteria defined by the authors. It was found that the most frequently occurring element of collaboration was the provision of trade credit to retailers – less often, long-term contracts and synchronization of replenishment. The least used was information sharing. The research results show that the form of collaboration is significantly affected by customer value. Therefore, the level of collaboration can be improved by building horizontally interconnected retail chains. The paper enriches theoretical knowledge by specifying possible elements of collaboration between small retail stores and suppliers and mapping the frequency of their implementation.

  1. Joint Economic Lot Sizing Optimization in a Supplier-Buyer Inventory System When the Supplier Offers Decremental Temporary Discounts

    Directory of Open Access Journals (Sweden)

    Diana Puspita Sari

    2012-02-01

    Full Text Available This research discusses mathematical models of joint economic lot size optimization in a supplier-buyer inventory system in a situation when the supplier offers decremental temporary discounts during a sale period. Here, the sale period consists of n phases and the phases of discounts offered descend as much as the number of phases. The highest discount will be given when orders are placed in the first phase while the lowest one will be given when they are placed in the last phase. In this situation, the supplier attempts to attract the buyer to place orders as early as possible during the sale period. The buyers will respon these offers by ordering a special quantity in one of the phase. In this paper, we propose such a forward buying model with discount-proportionally-distributed time phases. To examine the behaviour of the proposed model, we conducted numerical experiments. We assumed that there are three phases of discounts during the sale period. We then compared the total joint costs of special order placed in each phase for two scenarios. The first scenario is the case of independent situation – there is no coordination between the buyer and the supplie-, while the second scenario is the opposite one, the coordinated model. Our results showed the coordinated model outperform the independent model in terms of producing total joint costs. We finally conducted a sensitivity analyzis to examine the other behaviour of the proposed model. Keywords: supplier-buyer inventory system, forward buying model, decremental temporary discounts, joint economic lot sizing, optimization.

  2. Modeling and analysis for determining optimal suppliers under stochastic lead times

    DEFF Research Database (Denmark)

    Abginehchi, Soheil; Farahani, Reza Zanjirani

    2010-01-01

    systems. The item acquisition lead times of suppliers are random variables. Backorder is allowed and shortage cost is charged based on not only per unit in shortage but also per time unit. Continuous review (s,Q) policy has been assumed. When the inventory level depletes to a reorder level, the total...... order is split among n suppliers. Since the suppliers have different characteristics, the quantity ordered to different suppliers may be different. The problem is to determine the reorder level and quantity ordered to each supplier so that the expected total cost per time unit, including ordering cost...

  3. Supplier selection in automobile industry: A mixed balanced scorecard–fuzzy AHP approa

    Directory of Open Access Journals (Sweden)

    Masoud Rahiminezhad Galankashi

    2016-03-01

    Full Text Available This study proposed an integrated Balanced Scorecard–Fuzzy Analytic Hierarchical Process (BSC–FAHP model to select suppliers in the automotive industry. In spite of the vast amount of studies on supplier selection, the evaluation and selection of suppliers using the specific measures of the automotive industry are less investigated. In order to fill this gap, this research proposed a new BSC for supplier selection of automobile industry. Measures were gathered using a literature survey and accredited using Nominal Group Technique (NGT. Finally, a fuzzy AHP was used to select the best supplier.

  4. Sole ulcers in dairy-cattle - associations with season, cow characteristics, disease, and production

    DEFF Research Database (Denmark)

    Enevoldsen, Carsten; Grohn, Y T; Thysen, Iver

    1991-01-01

    lactation and body weight were positively associated with sole ulcer. Heel erosion was associated with sole ulcer depending on season of trimming and parity. Presence of sole ulcer but not heel erosion in a lactation increased the risk of sole ulcer in the subsequent lactation. The interval between...

  5. Buyer-Supplier Relationships in the Perspective of Working Environment and Organizational Performance: Review and Research Agenda

    DEFF Research Database (Denmark)

    Imranul, Hoque; Rana, Mohammad Bakhtiar

    2018-01-01

    The purpose of this study is to review and synthesise how extant literature understand different natures of buyer supplier relationships (BSR) and how BSR affect, and are affected by, the working environment (WE), and how both BSR and WE affect organisational performance (OP). Following...... a systematic review protocol and literature corroboration, we map the literature covering BSR, WE, and OP and conduct a thematic analysis on three themes (i.e. buyer supplier relationships, working environment, organisational performance) and their relationships. Our review synthesises BSR typologies and group......, working environment and organisational performance. Our findings illustrate that working environment is becoming important in cross-border sourcing and supply management, but this has been neglected in BSR literature from almost every disciplinary perspective. No study has directly linked the three themes...

  6. AHP approach for supplier evaluation and selection in a steel manufacturing company

    Directory of Open Access Journals (Sweden)

    Farzad Tahriri

    2008-12-01

    Full Text Available Supplier selection is one of the most critical activities of purchasing management in supply chain. Supplier selection is a complex problem involving qualitative and quantitative multi-criteria. A trade-off between these tangible and intangible factors is essential in selecting the best supplier. The work incorporates AHP in choosing the best suppliers. The results suggest that AHP process makes it possible to introduce the optimum order quantities among the selected suppliers so that the Total Value of Purchasing (TVP becomes maximum. In this work, an AHP-based supplier selection model is formulated and then applied to a real case study for a steel manufacturing company in Malaysia. The use of the proposed model indicates that it can be applied to improve and assist decision making to resolve the supplier selection problem in choosing the optimal supplier combination. The work represents the systematic identification of the important criteria for supplier selection process. In addition, the results exhibit the application of development of a multi-criteria decision model for evaluation and selection of suppliers with proposed AHP model, which by scoring the performance of suppliers is able to reduce the time taken to select a vendor.

  7. PENGAMBILAN KEPUTUSAN UNTUK PEMILIHAN SUPPLIER BAHAN BAKU DENGAN PENDEKATAN ANALYTIC HIERARCHY PROCESSDI PR PAHALA SIDOARJO

    Directory of Open Access Journals (Sweden)

    Miftakhul Jannah

    2016-11-01

    Full Text Available Choosing right raw material supplier(s is essential to reassure raw material of good quality. There are several approcahes being used for supplier selection, including method of selection and evaluation system, and models. This study aimed at evaluating and developing raw material supplier selection method in PR Pahala, Sidoarjo, Indonesia, a cigarrette company. The model used in this study was QCDFR (Quality, Cost, Delivery, Flexibility, Responsiveness model. Several stages employed during development of the model were: establishing criterion, performance indicator of supplier of each criterion, alternative, criterion weight, performance indicator of supplier alternative and, making of spread sheet and reporting of evaluation election of supplier. There are several main suppliers of dried tobacco to be evaluated in this study, which come from four different areas, namely Madura, Bondowoso, Tulungagung, and Malang. The model developed should be able to assisst the company in the supplier selection to achieve supplier of the best performance.The most important criterion factor of supplier selection in PR Pahala is criterion of quality which had highest weight of 0,373, followed by cost of 0,266, criterion of responsivenessof 0,156, criterion of delivery of 0,128, criterion of flexibility of 0,077. Moreover, weight of selection alternative according to area were Madura with 0,311, Tulungagung 0,234, Bondowoso 0,253, Malang 0,202.

  8. Supplier Contribution to Profit Calculation and Supplier’s Expense Levels

    Directory of Open Access Journals (Sweden)

    Danilo Dorović

    2015-05-01

    Full Text Available Suppliers of goods present a very important cost object for trading companiessuch as retail. There is, however, no theoretical explanation as to how to calculate a contribution to profits generated from an individual supplier. This calculation is the subject of the paper. There is no calculation that shows how goods, provided from the supplier, create profit through gross margin and how the supplier`s behavior influences the costs (like delivery terms, costs of keeping specific goods fresh…. The final costs further decrease the profit generated by suppliers. As they have long found it illogical to calculate contribution to profit from suppliers in a production company, trading companies have long ignored it, as well. The Activity Based Costing (ABC, as the up-to-date system, still does not possess the cost hierarchy for suppliers as the cost object. The aim of the paper is to present a proposal for creating the cost hierarchy for suppliers in a trade company through creating a theoretical financial model as a method. The model also offers a theoretical explanation of how to calculate the contribution from a supplier or a group of suppliers. It is based on empirically evident activities in any supermarket or hypermarket, which makes it possible to create explanatory theoretical research.

  9. Green supplier development program selection using NGT and VIKOR under fuzzy environment

    DEFF Research Database (Denmark)

    Awasthi, Anjali; Govindan, Kannan

    2016-01-01

    Developing environmental performance of suppliers is critical for green supply chain management. Organizations are nowadays investing in various green supplier development programs to enhance their supplier performances. The decision to select the right program for green supplier development...... is often a challenging decision due to lack of prior experience, limited quantitative information, specific context of the organization, and varying supplier backgrounds. This paper addresses the problem of evaluating green supplier development programs and proposes a fuzzy NGT (Nominal Group Technique......)-VIKOR (VlseKriterijumska Optimizacija I Kompromisno Resenje) based solution approach. NGT is used to identify criteria for evaluating green supplier development programs. Fuzzy theory is used to address qualitative (linguistic) ratings for the alternatives and the selected criteria used under lack...

  10. Supplier Selection for Food Industry: A Combination of Taguchi Loss Function and Fuzzy Analytical Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Renna Magdalena

    2012-09-01

    Full Text Available Supplier selection is an important part of supply chain management process by which firms identify, evaluate, and establish contracts with suppliers. Deciding the right supplier can be a complex task. As such, various criteria must be taken into account to choose the best supplier. This study focused on the supply in the packaging division of a food industry in Denpasar-Bali. A combination of Taguchi Loss Function and fuzzy-AHP (Analytical Hierarchy Process Fuzzy Linear Programming was used to determine the best supplier. In this analysis, several suppliers’ criteria were considered, namely quality, delivery, completeness, quality loss and environmental management. By maximizing the suppliers’ performances based on each criterion and aggregating the suppliers’ performances based on the overall criteria, the best supplier was determined. Keywords: supplier selection, taguchi loss function, AHP, fuzzy linear programming,environment

  11. Examining the Modes Malware Suppliers Use to Provide Goods and Services

    Directory of Open Access Journals (Sweden)

    Tony Bailetti

    2016-02-01

    Full Text Available Malware suppliers use various modes to provide goods and services to customers. By mode, we mean “the way” the malware supplier chooses to function. These modes increase monetization opportunities and enable many security breaches worldwide. A theoretically sound framework that can be used to examine the various modes that malware suppliers use to produce and sell malware is needed. We apply a general model specified recently by Hagiu and Wright to study five modes that malware suppliers use to deliver goods and services to their customers. The framework presented in this article can be used to predict the mode in which a malware supplier will function; to study which types of malware suppliers, agents, and customers are attracted to each mode; to discover new modes; and to better understand the threat a malware supplier presents.

  12. Alternative of raw material’s suppliers using TOPSIS method in chicken slaughterhouse industry

    Science.gov (United States)

    Sari, R. M.; Rizkya, I.; Syahputri, K.; Anizar; Siregar, I.

    2018-02-01

    Chicken slaughterhouse industry is one of the fastest growing industries that depends on the freshness of raw materials. The raw materials quality arrive at the company depends heavily on the suppliers. Fresh chicken and frozen chicken meat are the main raw materials for this industry. Problems occurred by the suppliers are catering the amount of raw material needs that are not appropriate and also delay during delivery process. This condition causes disruption of the production process in the company. Therefore, it is necessary to determine the best suppliers to supply the main raw materials of fresh and frozen chicken meat on the slaughterhouse chicken industry. This study analyze the supplier’s capability by using TOPSIS method. This method use to find out the best supplier. The TOPSIS method is performed using the principle that chosen alternative must have the shortest distance from the positive solution and furthest from the ideal solution of the geometric point by using the Euclidean distance to determine the relative proximity of the optimum solution alternative. TOPSIS method found the rank of best supplier’s order is supplier A followed by supplier D, supplier B, supplier C, supplier E, supplier F, and supplier G. Based on the rank order obtained from each company, it will assist the company in prioritizing the order to the supplier with the best rank. Total supply from All suppliers are 885,994 kg per month. Based on the results of research, the top five suppliers have been sufficient to meet the needs of the company.

  13. Dependency on suppliers as a peril in the acquisition of innovations? The role of buyer attractiveness in mitigating potential negative dependency effects in buyer–supplier relations

    NARCIS (Netherlands)

    Schiele, Holger; Vos, Frederik Guido Sebastiaan

    2015-01-01

    New product development occurs nowadays mostly in joint buyer–supplier projects, which require closer ties between the partners in order to mobilize their resources. One issue arising from this collaborative model is that the buyer tends to become more dependent on the supplier. Multiple cases of

  14. Use of Powder PEG-3350 as a Sole Bowel Preparation

    Science.gov (United States)

    Arora, Manish

    2008-01-01

    Objective: To assess the efficacy of low-volume powder polyethylene glycol (PEG)-3350 as a sole bowel preparation for colonoscopy. Methods: This case series examined 245 consecutive patients (a mixture of inpatients and outpatients undergoing screening colonoscopy) at a hospital endoscopy center over a 2-year period. The patients received powder PEG-3350 in the amount of 204 g dissolved in 32 oz of water and taken in 3 divided doses 1 hour apart with 8 oz of water in between each dose. Colon preparation scores (CPS) were used to assess the quality of colon cleansing. The results obtained from the 245 patients were collated and compared to those of patients receiving sodium phosphate, the historical control. Results: The mean CPS was calculated to be 3.43, with a standard deviation of 1.12. Of the 245 patients, 92 were scored with a grade of 4, and 5 patients had incomplete colonoscopies secondary to failure of bowel preparation (CPS=0). Among the remaining patients, 22 and 26 were graded as poor (CPS=1) or fair (CPS=2) bowel preparations, respectively. Conclusion: The low-volume powder PEG-3350 formula used in our case series showed effective colon cleansing and may be considered for use as a sole bowel preparation. PMID:21960925

  15. Trisomy 19 as the sole chromosomal anomaly in hematologic neoplasms.

    Science.gov (United States)

    Johansson, B; Billström, R; Mauritzson, N; Mitelman, F

    1994-05-01

    Trisomy 19 was found as the sole chromosomal aberration in three hematologic malignancies: one chronic myelomonocytic leukemia and two cases of of immunophenotypically immature acute myeloid leukemia (AML). A compilation of previously published hematologic neoplasms with +19 as the only change reveals that this anomaly is strongly associated with myeloid malignancies; 25 of 31 cases have been myelodysplastic syndromes (MDS) or AML. Eight of the 11 MDS cases have been either refractory anemia (RA) or RA with excess of blasts, and four of the 14 AML cases have had preleukemic myelodysplastic cases phase, with the +19 accruing during the time of leukemic transformation. The AML cases have, in general, been either or early maturation arrest, i.e. undifferentiated or AML-M1/M2, or of myelomonocytic-monoblastic origin, i.e., AML-M4/M5. None of the MDS or AML cases with +19 had had a previous history of radio- or chemotherapy. We conclude that trisomy 19, as the sole anomaly, is a characteristic abnormality in de novo myeloid malignancies. No clinical features seem to characterize patients with +19 AML and MDS and the prognostic impact of the aberration remains to be elucidated.

  16. Risk factors of metabolic syndrome among food suppliers

    Directory of Open Access Journals (Sweden)

    Pasdar Yahya

    2017-01-01

    Full Text Available Introduction/Objective. As a risk factor for chronic diseases, metabolic syndrome (MS is increasing at an alarming rate. The prevalence of MS varies according to lifestyle and occupation in different populations. The present study aimed to determine the prevalence of MS and its components in food suppliers. Methods. A total of 112 food suppliers were randomly selected from all around the city. Data collection tools included demographic, physical activity, and food frequency questionnaires. Body composition was measured using Bio-Electrical Body Analyzer. A sample of 5 ml of fasting blood was taken from participants to assess lipid profile, blood sugar, insulin, and liver enzymes. The data were analyzed using χ2, Kolmogorov–Smirnov and ANOVA tests. Results. Participants’ mean BMI was 27.1 ± 3.9 kg/m2, 43.6% were overweight, and 26.4% were obese. Consumption of vegetables was less and of meats more than recommended amounts. The prevalence of MS was 45.5% (51 people, which increased with aging (p = 0.02. Among factors causing MS, the most common one was waist-to-hip ratio (WHR > 0.09 (72.7%, followed by high triglyceride and low HDL. Conclusion. In this study, the prevalence of MS among food suppliers was higher than the world average and than prevalence in other countries. WHR (or obesity was found to be the most important risk factor for MS. To reduce the risk of MS, changing dietary consumption habits and increased physical activity are recommended to persons with high risk and sedentary occupations.

  17. The Patent Literature As A Shortcut To Identify Knowledge Suppliers

    DEFF Research Database (Denmark)

    Søberg, Peder Veng

    patents which decreases the time span between a patent is filed and its value can be evaluated when searching the patent literature. A potential benefit thereof could be that the patent literature could become relevant in order to identify potential knowledge suppliers.......The present paper explores characteristics of valuable patents that have been subject to litigation which resulted in some of the largest fines to patent infringers reported in history. The valuable patents are compared with less valuable patents in order to identify new methods of evaluating...

  18. Managing supplier relationships in a new product development context

    NARCIS (Netherlands)

    Sjoerdsma, M.; Weele, van A.J.

    2014-01-01

    Organizations can no longer rely solely on their own resources to innovate and look for strategic interactions beyond their organizational boundaries, allowing them to improve the quality of their own internal resources by investing in core competencies while contracting out other knowledge domains.

  19. How Do Contractors Select Suppliers for Greener Construction Projects? The Case of Three Swedish Companies

    Directory of Open Access Journals (Sweden)

    Shahin Mokhlesian

    2014-06-01

    Full Text Available There are many studies of contractor selection based on clients and the selection of suppliers by contractors. However, supplier selection specifically related to green construction projects has been much less studied. Green construction differs from conventional construction because of differences in its underlying principles and use of environmentally-friendly materials and technologies. This paper studies how procurers in contractor companies in Sweden adopt green projects and how contractor perception of supplier mastery of green knowledge affects supplier selection. The investigation is based on a set of semi-structured interviews conducted among three large contractors in Sweden. A main finding is that the perceived differences between green and conventional projects do not change supplier selection dramatically. An implication is that “greener projects” is a more appropriate denotation than “green project”. Evidence shows that suppliers’ green knowledge is an important factor in supplier selection, as respondents rated suppliers’ knowledge of green projects as very important, and to fix his, there was a consensus among respondents about the need for close collaboration between contractors and suppliers. To ensure knowledge acquisition from suppliers and to increase their competitive advantage over rivals, contractors collaborate with their suppliers in a partnering setting. It is anticipated that the results of this study will be used to fill the gap in the literature on supplier selection in green projects and can also be used for construction firms contemplating getting involved in green projects.

  20. The Establishment of a Green Supplier Selection and Guidance Mechanism with the ANP and IPA

    Directory of Open Access Journals (Sweden)

    Chih-Chao Chung

    2016-03-01

    Full Text Available This study aims to establish a green supplier selection and guidance mechanism by integrating the features of an ANP (Analytic Network Process and an IPA (Importance–Performance Analysis to achieve sustainable management for green supply chains. Using an expert survey, this study developed green supplier selection criteria. It adopted an ANP, which allows for interdependencies and feedback between the various criteria, to select competitive green suppliers. Then, it used an IPA, which can analyze the criteria’s significance and performance levels, to provide green suppliers with direction for guidance and improvements. The green supplier selection and guidance mechanism featuring an ANP and IPA is thus established and validated through case studies. The research results showed the following: (1 the green supplier selection criteria comprise a total of 11 performance evaluation criteria from the three dimensions of operation, competence, and environmental consciousness; (2 as shown by the APN evaluation results, environmental benefits, environmental regulations, finance, technological competence, and delivery time are the top five among the overall green criteria of the company; the performance of the various suppliers is thus arranged in order, and the most competitive supplier is selected; (3 an IPA is used to analyze the criteria’s significance and supplier performance levels and to provide the suppliers with suggestions on priority improvements, including implementing the requirements in the environmental regulations, establishing comprehensive financial management procedures, improving corporate technological competence, and consolidating customer service; (4 it is suggested that an ANP and IPA should be integrated in the applications, which could simplify the green supplier selection and guidance mechanisms and increase the efficiency of supplier management, thus creating a three-win situation for the clients, the company, and the

  1. Supplier selection criteria for sustainable supply chain management in thermal power plant

    Science.gov (United States)

    Firoz, Faisal; Narayan Biswal, Jitendra; Satapathy, Suchismita

    2018-02-01

    Supplies are always in great demand when it comes to industrial operations. The quality of raw material their price accompanied by sustainability and environmental effects are a major concern for industrial operators these days. Supply Chain Management is the subject which is focused on how the supply of different products is carried out. The motive is that each operation performed can be optimized and inherently the efficiency of the whole chain is integrated. In this paper we will be dealing with all the criteria that are required to be evaluated before selecting a supplier, in particular, focusing on Thermal Power Plant. The most suppliers of the thermal power plant are the coal suppliers. The quality of coal directly determines the efficiency of the whole plant. And when there are matters concerning coal environmental pollution plays a very crucial role. ANP method has been used here to select suppliers of thermal power sectors in Indian context. After applying ANP to prioritize the sustainable supplier selection criteria, it is found that for thermal power industries best suppliers are Nationalized/State owned suppliers then 2nd ranked suppliers are imported supplier. Private owned suppliers are ranked least. So private owned suppliers must be more concerned about their performance. Among these suppliers it is found that to compete in the global market privatized suppliers have to give more emphasize on most important criteria like sustainability, then fuel cost and quality. Still some sub-criteria like a clean program, environmental issues, quality, reliability, service rate, investment in high technology, green transportation channel, waste management etc needs for continuous improvement as per their priority.

  2. Production control and supplier selection under demand disruptions

    Directory of Open Access Journals (Sweden)

    Xianzhe Chen

    2010-12-01

    Full Text Available This paper investigates the effects of demand disruptions on production control and supplier selection in a three-echelon supply chain system. The customer demand is modeled as a jump-diffusion process in a continuous-time setting. A two-number production-inventory policy is implemented in the production control model for the manufacturer. The objective is to minimize the long-term average total cost consisting of backlog cost, holding cost, switching cost, and ordering cost. The simulated annealing method is applied to search the optimal critical switching values. Furthermore, an improved analytical hierarchy process (AHP is proposed to select the best supplier, based on quantitative factors such as the optimal long-term total cost obtained through the simulated annealing method under demand disruptions and qualitative factors such as quality and service. Numerical studies are conducted to demonstrate the effects of demand disruptions in the face of various risk scenarios. Managerial insights from simulation results are provided as well. Our approaches can be implemented as the “stress test” for companies in front of various supply chain disruption scenarios.

  3. Improving environmental impact and cost assessment for supplier evaluation

    Science.gov (United States)

    Beucker, Severin; Lang, Claus

    2004-02-01

    Improving a company"s environmental and financial performance necessitates the evaluation of environmental impacts deriving from the production and cost effects of corporate actions. These effects have to be made transparent and concrete targets have to be developed. Such an evaluation has to be done on a regular basis but with limited expenses. To achieve this, different instruments of environmental controlling such as LCA and environmental performance indicators have to be combined with methods from cost accounting. Within the research project CARE (Computer Aided Resource Efficiency Accounting for Medium-Sized Enterprises), the method Resource Efficiency Accounting (REA) is used to give the participating companies new insights into hidden costs and environmental effects of their production and products. The method combines process based cost accounting with environmental impact assessment methodology and offers results that can be integrated into a company"s environmental controlling system and business processes like cost accounting, supplier assessment, etc. Much of the data necessary for the combined assessment can be available within a company"s IT system and therefore can be efficiently used for the assessment process. The project CARE puts a strong focus on the use of company data and information systems for the described assessment process and offers a methodological background for the evaluation and the structuring of such data. Besides the general approach of the project CARE the paper will present results from a case study in which the described approach is used for the evaluation of suppliers.

  4. Types of unethical tactics in negotiation between buyer and supplier

    Directory of Open Access Journals (Sweden)

    Božidar

    2014-06-01

    Full Text Available Research Question (RQ: This article researches the kinds of unethical tactics, which can use customers or suppliers to achieve better negotiating outcome. Purpose: Determine which tactics they used, from where they rise from and what the other authors about resulting of using unethical tactics. Method: Analysis of articles from Ebsco and ProQuest databases. Results: Getting of ethical knowledge, types of unethical negotiation tactics and awareness of the limits of ethics in the negotiations process between suppliers and customers. Organization: Managers can gain the recognition of unethical tactics, their using in the negotiation process and the construction of negotiating temperament or even competence. The research contributes to a better achievement of the performance of the organization. The results of this article can contribute to the negotiators decision-making on the use of unethical tactics. Society: Ethical negotiation helps to improve the reputation and respect of the organization, which represents the negotiator. Originality: In a review of existing articles and searches we have not found similar studies to investigate the unethical negotiating tactics. Limitations/Future Research: The article is limited to fifteen articles and three books.

  5. An integrative multi-criteria decision making techniques for supplier evaluation problem with its application

    Science.gov (United States)

    Fatrias, D.; Kamil, I.; Meilani, D.

    2018-03-01

    Coordinating business operation with suppliers becomes increasingly important to survive and prosper under the dynamic business environment. A good partnership with suppliers not only increase efficiency, but also strengthen corporate competitiveness. Associated with such concern, this study aims to develop a practical approach of multi-criteria supplier evaluation using combined methods of Taguchi loss function (TLF), best-worst method (BWM) and VIse Kriterijumska Optimizacija kompromisno Resenje (VIKOR). A new framework of integrative approach adopting these methods is our main contribution for supplier evaluation in literature. In this integrated approach, a compromised supplier ranking list based on the loss score of suppliers is obtained using efficient steps of a pairwise comparison based decision making process. Implemetation to the case problem with real data from crumb rubber industry shows the usefulness of the proposed approach. Finally, a suitable managerial implication is presented.

  6. Decision support model for selecting and evaluating suppliers in the construction industry

    Directory of Open Access Journals (Sweden)

    Fernando Schramm

    2012-12-01

    Full Text Available A structured evaluation of the construction industry's suppliers, considering aspects which make their quality and credibility evident, can be a strategic tool to manage this specific supply chain. This study proposes a multi-criteria decision model for suppliers' selection from the construction industry, as well as an efficient evaluation procedure for the selected suppliers. The model is based on SMARTER (Simple Multi-Attribute Rating Technique Exploiting Ranking method and its main contribution is a new approach to structure the process of suppliers' selection, establishing explicit strategic policies on which the company management system relied to make the suppliers selection. This model was applied to a Civil Construction Company in Brazil and the main results demonstrate the efficiency of the proposed model. This study allowed the development of an approach to Construction Industry which was able to provide a better relationship among its managers, suppliers and partners.

  7. INPO Perspectives and Activities to Enhance Supplier Human Performance and Safety Culture

    International Nuclear Information System (INIS)

    Duncan, R. J.

    2016-01-01

    Within their own organizations, utilities have made significant improvements in human performance and safety culture, supported by a strong community of practice through INPO and WANO. In recent years, utilities have been making increasing use of suppliers for design, construction, inspection and maintenance services in support of their NPPs. Many of these suppliers do not have the benefit of being members of a community of practice when it comes to human performance and safety culture. To help the supplier community make improvements similar to what the utilities have achieved, INPO has recently expanded its Supplier Participant program to address the issue of human performance and safety culture in the supplier community. The intent of this paper will be to share the INPO’s perspectives and activities in helping suppliers of services and products to NPPs enhance their human performance and safety culture. (author)

  8. Strategic wholesale pricing for an incumbent supplier facing with a competitive counterpart.

    Science.gov (United States)

    Sun, Jianwu

    2014-01-01

    We introduce a wholesale pricing strategy for an incumbent supplier facing with a competitive counterpart. We propose a profit function which considers both the present loss and future loss from a wholesale price and then study the optimal wholesale prices for different objectives about this profit function for the incumbent supplier. First, we achieve an optimal wholesale price for the incumbent supplier to maximize his expected profit. Then, to reduce the risk originating from the fluctuation in the competitive supplier's wholesale price, we integrate the conditional value-at-risk (CVaR) measure in financial risk management into this study and derive an optimal wholesale price to maximize CVaR about profit for the incumbent supplier. Besides, the properties of the two optimal wholesale prices are discussed. Finally, some management insights are suggested for the incumbent supplier in a competitive setting.

  9. Mixed integer linear programming model for dynamic supplier selection problem considering discounts

    Directory of Open Access Journals (Sweden)

    Adi Wicaksono Purnawan

    2018-01-01

    Full Text Available Supplier selection is one of the most important elements in supply chain management. This function involves evaluation of many factors such as, material costs, transportation costs, quality, delays, supplier capacity, storage capacity and others. Each of these factors varies with time, therefore, supplier identified for one period is not necessarily be same for the next period to supply the same product. So, mixed integer linear programming (MILP was developed to overcome the dynamic supplier selection problem (DSSP. In this paper, a mixed integer linear programming model is built to solve the lot-sizing problem with multiple suppliers, multiple periods, multiple products and quantity discounts. The buyer has to make a decision for some products which will be supplied by some suppliers for some periods cosidering by discount. To validate the MILP model with randomly generated data. The model is solved by Lingo 16.

  10. Supplier selection for a tire company with AHP and PROMETHEE methods

    Directory of Open Access Journals (Sweden)

    Atakan ALKAN

    2017-04-01

    Full Text Available Supplier selection is very important for a company to be successful in a globalized competitive environment. The aims at choosing the optimal supplier; to increase customer satisfaction, improve the competitive ability and continue to exist at minimal cost. This study was intended to choose the most suitable raw material supplier in a company engaged in the production of agricultural tires. In the study Analytical Hierarchy Process (AHP and Promethee I-II methods were applied in order to select the most optimal supplier to a company. In conclusion, AHP and Promethee I-II methods used by the company to determine the suppliers with the optimal supplier and brought several recommendations.

  11. The Ideal Criteria of Supplier Selection for SMEs Food Processing Industry

    Directory of Open Access Journals (Sweden)

    Ramlan Rohaizan

    2016-01-01

    Full Text Available Selection of good supplier is important to determine the performance and profitability of SMEs food processing industry. The lack of managerial capability on supplier selection in SMEs food processing industry affects the competitiveness of SMEs food processing industry. This research aims to determine the ideal criteria of supplier for food processing industry using Analytical Hierarchy Process (AHP. The research was carried out in a quantitative method by distributing questionnaires to 50 SMEs food processing industries. The collected data analysed using Expert Choice software to rank the supplier selection criteria. The result shows that criteria for supplier selection are ranked by cost, quality, service, delivery and management and organisation while purchase cost, audit result, defect analysis, transportation cost and fast responsiveness are the first five sub-criteria. The result of this research intends to improve managerial capabilities of SMEs food processing industry in supplier selection.

  12. Utility Expectations for Human Performance and Safety Culture in the Supplier Community

    International Nuclear Information System (INIS)

    Clewett, L. K.

    2016-01-01

    Canadian NPPs, like many others around the world, make use of suppliers for the design and execution of major projects, and to support on-going inspection and maintenance activities. The work performed by suppliers today represents a significant portion of the work performed at utility NPPs, and, at times, can even exceed the work performed by utility staff. It is imperative for both the utility and the supplier work forces to work in collaboration to ensure that the probability of consequential errors impacting plant safety or contributing to broader enterprise risk is kept very low. An important element for keeping the risk low is for utilities to work with their suppliers to develop a high degree of confidence that the supplier workforce is performing to the same standards of human performance and safety culture as its own staff. This paper will provide a senior utility executive’s expectations and perspective on achieving excellence in supplier human performance and safety culture. (author)

  13. Depth and substrate as determinants of distribution of juvenile flathead sole (Hippoglossoides elassodon) and rock sole (Pleuronectes bilineatus), in Kachemak Bay, Alaska

    Science.gov (United States)

    Abookire, Alisa A.; Norcross, Brenda L.

    1998-01-01

    Three transects in Kachemak Bay, Alaska, were sampled in September 1994, May and August 1995, and February, May, and August 1996. Juvenile flathead sole, Hippoglossoides elassodon, and rock sole, Pleuronectes bilineatus, were the most abundant flatfishes, comprising 65-85% of all fiatfishes captured at any period. Collections of fish and sediments were made at regular depth contour intervals of l0 m. Habitat distribution was described by depth at 10 m increments and sediment percent weights of gravel, sand, and mud. Year-round habitat of flathead sole age-0 was primarily from 40 to 60 m, and age-1 habitat was primarily from 40 to 80 m. Summer habitat of rock sole age-0 and -1 was from 10 to 30 m, and in winter they moved offshore to depths of up to 150 m. Both age classes of flathead sole were most abundant on mixed mud sediments, while age-1 were also in high abundance on muddy sand sediments. Rock sole age-0 and -1 were most abundant on sand, though age-1 were also found on a variety of sediments both finer and coarser grained than sand. Flathead sole and rock sole had distinctive depth and sediment habitats. When habitat overlap occurred between the species, it was most often due to rock sole moving offshore in the winter. Abundances were not significantly different among seasons for age-1 flatfishes.

  14. Supplier Relationship Management at Army Life Cycle Management Commands: Gap Analysis of Best Practices

    Science.gov (United States)

    2012-01-01

    contracts. - 76 - In step 9, maintaining momentum in supplier management , the relationship between the customer and supplier continues to develop...REPORT DATE 2012 2. REPORT TYPE 3. DATES COVERED 00-00-2012 to 00-00-2012 4. TITLE AND SUBTITLE Supplier Relationship Management at Army Life... Relationship Management at Army Life Cycle Management Commands Gap Analysis of Best Practices Nancy Y. Moore, Amy G. Cox, Clifford A. Grammich

  15. Team Risk Management: A New Model for Customer-Supplier Relationships

    Science.gov (United States)

    1994-07-01

    Management : A New Model for Customer - Supplier Relationships Ronald P. Higuera "Audrey J. Dorofee Julie A. Walker Ray C. Williams July 1994 ""•// 94...N/A N/A N/A 11. TITLE (Include Secuity Claaaificatioa) Team Risk Management : A New Model for Customer -Supplier Relationships 12. PERSONAL AUTHOR(S...by block number) FIELD GROUP SUB. GR. Customer - Supplier Relationships Risk Team Risk Management 19. ABSTRACT (cominus on = if necesaryd id’y by block

  16. The Ideal Criteria of Supplier Selection for SMEs Food Processing Industry

    OpenAIRE

    Ramlan Rohaizan; Engku Abu Bakar Engku Muhammad Nazri; Mahmud Fatimah; Ng Hooi Keng

    2016-01-01

    Selection of good supplier is important to determine the performance and profitability of SMEs food processing industry. The lack of managerial capability on supplier selection in SMEs food processing industry affects the competitiveness of SMEs food processing industry. This research aims to determine the ideal criteria of supplier for food processing industry using Analytical Hierarchy Process (AHP). The research was carried out in a quantitative method by distributing questionnaires to 50 ...

  17. Supplier Selection Proces: An Investigation and Implementation Action at Construction/Building Company

    OpenAIRE

    Hensmit, Andre

    2008-01-01

    The investigation was carried out to identify and understand the key characteristic of supplier selection that is to be considered in the real experience by Construction Company in South East Asia, especially Indonesia. The goal of this project focuses on the selection supplier process and its approaches, how the company performing the co-partnership relationship with suppliers, and as well find out the reason fro accomplishing these factors. The project involves interviewing a company in Ind...

  18. Strategic Wholesale Pricing for an Incumbent Supplier Facing with a Competitive Counterpart

    OpenAIRE

    Sun, Jianwu

    2014-01-01

    We introduce a wholesale pricing strategy for an incumbent supplier facing with a competitive counterpart. We propose a profit function which considers both the present loss and future loss from a wholesale price and then study the optimal wholesale prices for different objectives about this profit function for the incumbent supplier. First, we achieve an optimal wholesale price for the incumbent supplier to maximize his expected profit. Then, to reduce the risk originating from the fluctuati...

  19. Dynamic supplier selection problem considering full truck load in probabilistic environment

    Science.gov (United States)

    Sutrisno, Wicaksono, Purnawan Adi

    2017-11-01

    In this paper, we propose a mathematical model in a probabilistic dynamic optimization to solve a dynamic supplier selection problem considering full truck load in probabilistic environment where some parameters are uncertain. We determine the optimal strategy for this problem by using stochastic dynamic programming. We give some numerical experiments to evaluate and analyze the model. From the results, the optimal supplier and the optimal product volume from the optimal supplier were determined for each time period.

  20. Advanced qualification of pharmaceutical excipient suppliers by multiple analytics and multivariate analysis combined.

    Science.gov (United States)

    Hertrampf, A; Müller, H; Menezes, J C; Herdling, T

    2015-11-10

    Pharmaceutical excipients have different functions within a drug formulation, consequently they can influence the manufacturability and/or performance of medicinal products. Therefore, critical to quality attributes should be kept constant. Sometimes it may be necessary to qualify a second supplier, but its product will not be completely equal to the first supplier product. To minimize risks of not detecting small non-similarities between suppliers and to detect lot-to-lot variability for each supplier, multivariate data analysis (MVA) can be used as a more powerful alternative to classical quality control that uses one-parameter-at-a-time monitoring. Such approach is capable of supporting the requirements of a new guideline by the European Parliament and Council (2015/C-95/02) demanding appropriate quality control strategies for excipients based on their criticality and supplier risks in ensuring quality, safety and function. This study compares calcium hydrogen phosphate from two suppliers. It can be assumed that both suppliers use different manufacturing processes. Therefore, possible chemical and physical differences were investigated by using Raman spectroscopy, laser diffraction and X-ray powder diffraction. Afterwards MVA was used to extract relevant information from each analytical technique. Both CaHPO4 could be discriminated by their supplier. The gained knowledge allowed to specify an enhanced strategy for second supplier qualification. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Green supplier selection and order allocation in a low-carbon paper industry

    DEFF Research Database (Denmark)

    Govindan, Kannan; Sivakumar, R.

    2016-01-01

    is to engage the case company with their supplier networks to diminish the greenhouse gases (GHG) emissions and cost in their production process. It proposes a model to support the selection of the best green supplier and an allocation of order among the potential suppliers. The proposed model contains a two......-phase hybrid approach. The first phase presents the rating and selection of potential suppliers by considering economics (cost), operational factors (quality and delivery), and environmental criteria (recycle capability and GHG emission control) using Fuzzy Technique for Order of Preference by Similarity....... Finally, a conclusion and a suggested direction of future research are introduced....

  2. QUANTITY DISCOUNTS IN SUPPLIER SELECTION PROBLEM BY USE OF FUZZY MULTI-CRITERIA PROGRAMMING

    Directory of Open Access Journals (Sweden)

    Tunjo Perić

    2011-02-01

    Full Text Available Supplier selection in supply chain is a multi-criteria problem that involves a number of quantitative and qualitative factors. This paper deals with a concrete problem of flour purchase by a company that manufactures bakery products and the purchasing price of flour depends on the quantity ordered. The criteria for supplier selection and quantities supplied by individual suppliers are: purchase costs, product quality and reliability of suppliers. The problem is solved using a model that combines revised weighting method and fuzzy multi-criteria linear programming (FMCLP. The paper highlights the efficiency of the proposed methodology in conditions when purchasing prices depend on order quantities.

  3. Simple, cost effective & result oriented framework for supplier performance measurement in sports goods manufacturing industry

    Directory of Open Access Journals (Sweden)

    2011-09-01

    Full Text Available The emergences of global markets have increased competition worldwide. For the Sports Goods Manufacturing Industry which is considered to be an intensive supplier base industry with limited resources to sustain in what is already a very competitive market there is a need for the entire supply chain viz. raw material and machinery suppliers and manufacturers to measure their supplier's performance to reduce business risks and revenue losses. How to design & execute a simple, cost effective & result oriented Framework for Supplier Performance Measurement for sports goods manufacturing small - medium enterprises is the main aim of this research paper.

  4. Multicriteria decision group model for the selection of suppliers

    Directory of Open Access Journals (Sweden)

    Luciana Hazin Alencar

    2008-08-01

    Full Text Available Several authors have been studying group decision making over the years, which indicates how relevant it is. This paper presents a multicriteria group decision model based on ELECTRE IV and VIP Analysis methods, to those cases where there is great divergence among the decision makers. This model includes two stages. In the first, the ELECTRE IV method is applied and a collective criteria ranking is obtained. In the second, using criteria ranking, VIP Analysis is applied and the alternatives are selected. To illustrate the model, a numerical application in the context of the selection of suppliers in project management is used. The suppliers that form part of the project team have a crucial role in project management. They are involved in a network of connected activities that can jeopardize the success of the project, if they are not undertaken in an appropriate way. The question tackled is how to select service suppliers for a project on behalf of an enterprise that assists the multiple objectives of the decision-makers.Vários autores têm estudado decisão em grupo nos últimos anos, o que indica a relevância do assunto. Esse artigo apresenta um modelo multicritério de decisão em grupo baseado nos métodos ELECTRE IV e VIP Analysis, adequado aos casos em que se tem uma grande divergência entre os decisores. Esse modelo é composto por dois estágios. No primeiro, o método ELECTRE IV é aplicado e uma ordenação dos critérios é obtida. No próximo estágio, com a ordenação dos critérios, o método VIP Analysis é aplicado e as alternativas são selecionadas. Para ilustrar o modelo, uma aplicação numérica no contexto da seleção de fornecedores em projetos é realizada. Os fornecedores que fazem parte da equipe do projeto têm um papel fundamental no gerenciamento de projetos. Eles estão envolvidos em uma rede de atividades conectadas que, caso não sejam executadas de forma apropriada, podem colocar em risco o sucesso do

  5. Sources management; La gestion des sources

    Energy Technology Data Exchange (ETDEWEB)

    Mansoux, H.; Gourmelon; Scanff, P.; Fournet, F. [Institut de Radioprotection et de Surete Nucleaire, 92 - Fontenay-aux-Roses (France); Murith, Ch. [Office Federal de la SantePublique (Switzerland); Saint-Paul, N. [NOVAR, 75 - Paris (France); Colson, P. [Electricite de France (EDF/DPN), 93 - Saint-Denis (France); Jouve, A.; Feron, F. [Direction Generale de al Surete Nucleaire et de la Radioprotection, 75 - Paris (France); Haranger, D. [Electricite de France (EDF), 75 - Paris (France); Mathieu, P. [Institut Pasteur, 75 - Paris (France); Paycha, F. [CHU Louis Mourier, Unitede Medecine Nucleaire Assistance Publique-Hopitaux de Paris, 92 - Colombes (France); Israel, S. [CEGELEC NDT et la gestion des sources radioactives (France); Auboiroux, B. [APAVE (France); Chartier, P. [DRIRE de Basse-Normandie, Div. Surete Nucleaire et Radioprotection, 14 - Caen (France)

    2005-07-01

    Organized by the section of technical protection of the French society of radiation protection ( S.F.R.P.), these two days had for objective to review the evolution of the rule relative to the sources of ionising radiations 'sealed and unsealed radioactive sources, electric generators'. They addressed all the actors concerned by the implementation of the new regulatory system in the different sectors of activities ( research, medicine and industry): Authorities, manufacturers, and suppliers of sources, holders and users, bodies involved in the approval of sources, carriers. (N.C.)

  6. Suppliers of petrol to the UK retail market - end 1994

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    Suppliers of petrol to the UK retail market (as at 31.12.94) are tabulated, with brand names and company names, areas of operation, and total numbers of retail petrol outlets displaying brand names, self-service sites, company-owned sites and outlets retailing Derv given. Statistics resulting from a retail marketing survey (1995) are listed and cover UK petrol sites from 1985-1994; motorway brands; a regional breakdown of petrol and derv outlets; UK outlets retailing derv; average UK prices for petrol and derv per litre; percentage of petrol sites per company (1994); number of company petrol sites as a percentage of total; number of outlets at hypermarkets/supermarkets; and vapour recovery sites. (UK)

  7. ATLAS rewards Russian supplier for scintillating tile production

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    The ATLAS collaboration has awarded Russian firm SIA Luch from Podolsk in the Moscow region an ATLAS Supplier Award. This follows delivery by the company of the final batch of scintillating tiles for the collaboration's tile calorimeter some six months ahead of schedule. Representatives of the firm are seen here receiving the award at a ceremony held in the collaboration's tile calorimeter instrumentation plant at CERN on 30 July. In front of one tile calorimeter module instrumented by scintillating tiles are (left to right) IHEP physicists Evgueni Startchenko and Andrei Karioukhine, Luch Podolsk representatives Igor Karetnikov and Yuri Zaitsev, tile calorimeter project leader Rupert Leitner, ATLAS spokesperson Peter Jenni, and CERN tile calorimeter group leader Ana Henriques-Correia.

  8. Enriching services and uranium markets from an international supplier's perspective

    International Nuclear Information System (INIS)

    Guais, J.C.; Peterson, C.H.

    1987-01-01

    In the past 10 yr, the international market for nuclear fuel cycle products and services, mainly yellowcake and separative work units (SWUs), has been characterized by shifting patterns in global demand and resource allocation. For suppliers as well as buyers, the analysis of the supply and demand pattern over the next 10 yr can be a useful exercise, especially if it highlights geopolitical realities and the influence of new technologies. This paper will attempt to answer two questions related to the marketing of natural uranium and enrichment services: (1) on a global basis (i.e., for the Western World), are uranium and enrichment capacities now on line sufficient to meet long-term demand. (2) On a regional basis (the US, Europe, and Far East), what is the short-to-medium term pattern of the supply-and-demand balance

  9. Supplier quality assurance systems: a study in the nuclear industry

    International Nuclear Information System (INIS)

    Singer, A.J.; Churchill, G.F.; Dale, B.G.

    1988-01-01

    The results are reported of a study which investigated the impact of quality assurance on 13 suppliers to the nuclear industry. The purpose of the study was to determine the benefits and problems of applying quality assurance in the supply of high risk plant items and material for nuclear installations. The paper discusses the problems facing the industry including: multiple audits and inspections, the irritation with having to contend with two quality system standards (namely BS 5750 and BS 5882) and the cost effectiveness of the more stringent quality system and quality control surveillance requirements imposed by the nuclear industry. It is also pointed out that companies supplying non-nuclear industrial customers were dissatisfied with the qualifications, experience and professional competence of some auditors and many inspectors. (author)

  10. Measuring network competence in buyer-supplier relationships

    Directory of Open Access Journals (Sweden)

    Gert Human

    2011-04-01

    Full Text Available Managing multiple buyer-seller relationships in business-to-business networks demands an understanding of a firm’s competence to manage in an interconnected environment.  This paper reports on an attempt to measure network competence by using the NetCompTest scale in business-to-business markets in South Africa. Based on a pilot study refinement, the paper proposes an adjusted measurement scale and details the results of a second round of measurement conducted amongst 495 business-to-business managers in South Africa. The results established partial support for the use of the NetCompTest scale in a South African context, and analysis of variance indicated that some differences in the measurement based on firm and individual characteristics can be observed in the data. The paper assists in theory-building and provides managerial insights for managing buyer-supplier relationships in networks.

  11. IT OUTSOURCING: METHODOLOGY FOR SUPPLIER SELECTION CRITERIA FOR COMPETITIVE ADVANTAGE

    Directory of Open Access Journals (Sweden)

    Sergio Alexandre Simões

    2012-04-01

    Full Text Available Abstract: Two criteria are usually adopted to select the provider of IT: lower prices or better service qualification of the supplier. This article proposes a strategic approach: the company should hire the provider that best leverage their competitive advantages. This approach implied the need to develop a methodology. To support it, the authors analyzed four models, Porter, RBV (Resource-Based View, Balanced Scorecard and the Weapons and Field Competition. Preferred the latter to be the most complete, qualiquantitative technique and able to accurately align the goals of the IT service firm's to competitive contracting strategy. The methodology was developed and applied to an insurance company and in face of the excellent results, decided to write this article to disclose it.

  12. Evaluation of Agile Suppliers Using Fuzzy MCDM Approach

    Directory of Open Access Journals (Sweden)

    Dursun Mehtap

    2016-01-01

    Full Text Available In today’s competitive environment, supply chain need to be of high speed and flexibility, i.e., agile. Agility has been proposed as a response to the high levels of complexity and uncertainty in modern markets. It is a business-wide capability that embraces organizational structures, information systems and logistics processes. This study employs the hierarchical fuzzy MCDM algorithm proposed by Karsak and Ahiska for the evaluation of agile suppliers. This algorithm is based on the proximity to the ideal solution concept and it can address the problems containing both crisp and fuzzy data. The application of the decision making method is illustrated through a case study conducted in a privet hospital and the results are analysed.

  13. Postirradiation effects in alanine dosimeter probes of two different suppliers

    International Nuclear Information System (INIS)

    Anton, Mathias

    2008-01-01

    The measurand relevant for the dosimetry for radiation therapy is the absorbed dose to water, D W . The Physikalisch-Technische Bundesanstalt (PTB) is establishing a secondary standard for D W for high-energy photon and electron radiation based on electron spin resonance (ESR) of the amino acid alanine. For practical applications, like, for example, intercomparison measurements using the ESR/alanine dosimetry system, the temporal evolution of the ESR signal of irradiated probes is an important issue. This postirradiation behaviour is investigated for alanine pellets of two different suppliers for different storage conditions. The influence of the storage conditions on the temporal evolution may be dependent on the type of probes used. The measurement and analysis method developed at the PTB is able to circumvent the apparent difficulties in the case of alanine/paraffin probes. Care has to be taken in case this method cannot be applied

  14. The mobilization of supplier resources for complex projects

    DEFF Research Database (Denmark)

    Lutz, Salla; Ellegaard, Chris

    2015-01-01

    . Therefore, buying companies also need to influence supplier actors to prioritize and optimize resource flows into their specific exchange. Based on a theoretical basis comprising the literature on buyer-seller relationship, including resource based research of the Industrial Marketing and Purchasing (IMP......) group, as well as Dynamic Capabilities theory and the project management literature, this paper presents the results from a study of applied buying company resource mobilization routines. We report on a qualitative investigation of routines applied in complex construction projects in the North European...... offshore wind turbine industry. Complex construction/production projects are widespread global business phenomena, but knowledge of resource mobilization routines in this context is scarce in the literature. We find that the complex project owner (buying company) applies a series of 11 particular routines...

  15. Risk Sharing Partnerships With Suppliers: The Case of EMBRAER

    Directory of Open Access Journals (Sweden)

    Paulo Figueiredo

    2008-04-01

    Full Text Available Since the mid 1990s, the global aircraft industry has been creating new solutions for product development. Risk-sharing partnerships with suppliers began to be established in an attempt to reduce investments and, consequentially, the dependence on loans. The partners began not only to invest in tooling, engineering and infrastructure, but also to participate more directly in the projects, in the investments and design activities, acquiring rights to future sales income of products. This contractual modality, called risk-sharing partnership, is the focus of this study. Specifically, it analyzes the risk-sharing partnerships made by Embraer during the projects of the ERJ-170/190 family of aircrafts. It also aims to justify these partnerships, considering the current global aircraft market conditions, evaluating the critical success factors, requirements and macro-economic conditions which supported the adoption of this new policy.

  16. How Unilever palm oil suppliers are burning up Borneo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-04-15

    New evidence shows expansion by Unilever palm oil suppliers is driving species extinction in Central Kalimantan, and fuelling climate change. In November 2007, Greenpeace released 'Cooking the Climate', an 82-page report summarizing the findings of a two-year investigation that revealed how the world's largest food, cosmetic and biofuel companies were driving the wholesale destruction of Indonesia's rainforests and peatlands through growing palm oil consumption. This follow-up report provides further evidence of the expansion of the palm oil sector in Indonesia into remaining rainforests, orang-utan habitat and peatlands in Kalimantan. It links the majority of the largest producers in Indonesia to Unilever, probably the largest palm oil corporate consumer in the world.

  17. U.S. safety legislation a bonanza for suppliers

    Energy Technology Data Exchange (ETDEWEB)

    Tollinsky, N.

    2007-09-01

    New safety requirements for coal mines in the United States requires the installation of wireless two-way tracking systems. The Office of Miners' Health Safety and Training has demanded that the owners of West Virginia's 170 coal mines submit plans by July 31, 2007 that describe how and when they intend to procure communication and electonic tracking systems. An estimated 430 additional coal mines across the U.S. will be required to file their plans concerning communications and tracking equipment by June 15, 2009, according to the U.S. federal government's Mine Improvement and New Emergency Response (MINER) Act. Radio communication and leaky feeder systems are routine in Canada's hard rock mines. Several Ontario-based supply companies are well placed to take advantage of this opportunity. The plans of three Ontario suppliers regarding proposed communications systems, quotations, costs, and tracking are outlined. 3 figs.

  18. Towards functional specification independent of control system suppliers

    International Nuclear Information System (INIS)

    Galara, D.; Leret, E.

    1997-01-01

    For the next nuclear power plant generation, REP 2000, the Engineering and construction Division (ED) and the Research and development Division (R and D) of Electricite de France are working together in the field of Instrumentation and Control (I and C) to improve its engineering method and tools. This method and these tools are defined on the basis of the experience feedback from the N4 nuclear power plant generation and the current information technology, to improve engineering competitiveness and quality of control applications. We intend to decouple the I and C processing from the I and C Human Machine Interface (HMI), because methods and tools are different. In this paper, we only focus on method and tools for I and C processing. We define the I and C processing life cycle into three phases. The first phase is the specification of the control application processing, the product of which is called Functional Requirement Diagrams (FRDs). The second phase is the design of the I and C system. This phase is subdivided into two steps. The step 1 is the distribution of the FRDs into an I and C architecture. The step 2 is the allocation of resources of the I and C system, to support the distributed FRDs. The third phase is the implementation of the distributed FRDs into I and C equipment. The aim of the Engineering Division is to achieve formal FRDs, independent of I and C suppliers. This allows a large improvement for the quality of the specification and the dimensioning of the I and C system before calls for tenders. For the specification phase, studies are almost completed. For the design and the implementation phases, studies and experiments are in progress with European I and C system suppliers. As a conclusion, we present the interest of EDF for standards and especially IEC 1131 improvements. (author). 5 figs

  19. Suspect/Counterfeit Items Information Guide for Subcontractors/Suppliers

    Energy Technology Data Exchange (ETDEWEB)

    Tessmar, Nancy D. [Los Alamos National Laboratory; Salazar, Michael J. [Los Alamos National Laboratory

    2012-09-18

    Counterfeiting of industrial and commercial grade items is an international problem that places worker safety, program objectives, expensive equipment, and security at risk. In order to prevent the introduction of Suspect/Counterfeit Items (S/CI), this information sheet is being made available as a guide to assist in the implementation of S/CI awareness and controls, in conjunction with subcontractor's/supplier's quality assurance programs. When it comes to counterfeit goods, including industrial materials, items, and equipment, no market is immune. Some manufactures have been known to misrepresent their products and intentionally use inferior materials and processes to manufacture substandard items, whose properties can significantly cart from established standards and specifications. These substandard items termed by the Department of Energy (DOE) as S/CI, pose immediate and potential threats to the safety of DOE and contractor workers, the public, and the environment. Failure of certain systems and processes caused by an S/CI could also have national security implications at Los Alamos National Laboratory (LANL). Nuclear Safety Rules (federal Laws), DOE Orders, and other regulations set forth requirements for DOE contractors to implement effective controls to assure that items and services meet specified requirements. This includes techniques to implement and thereby minimizing the potential threat of entry of S/CI to LANL. As a qualified supplier of goods or services to the LANL, your company will be required to establish and maintain effective controls to prevent the introduction of S/CI to LANL. This will require that your company warrant that all items (including their subassemblies, components, and parts) sold to LANL are genuine (i.e. not counterfeit), new, and unused, and conform to the requirements of the LANL purchase orders/contracts unless otherwise approved in writing to the Los Alamos National Security (LANS) contract administrator

  20. Towards functional specification independent of control system suppliers

    Energy Technology Data Exchange (ETDEWEB)

    Galara, D; Leret, E [Electricite de France, Research and Development Div., Power Plant Control Branch, Chatou (France)

    1997-07-01

    For the next nuclear power plant generation, REP 2000, the Engineering and construction Division (ED) and the Research and development Division (R and D) of Electricite de France are working together in the field of Instrumentation and Control (I and C) to improve its engineering method and tools. This method and these tools are defined on the basis of the experience feedback from the N4 nuclear power plant generation and the current information technology, to improve engineering competitiveness and quality of control applications. We intend to decouple the I and C processing from the I and C Human Machine Interface (HMI), because methods and tools are different. In this paper, we only focus on method and tools for I and C processing. We define the I and C processing life cycle into three phases. The first phase is the specification of the control application processing, the product of which is called Functional Requirement Diagrams (FRDs). The second phase is the design of the I and C system. This phase is subdivided into two steps. The step 1 is the distribution of the FRDs into an I and C architecture. The step 2 is the allocation of resources of the I and C system, to support the distributed FRDs. The third phase is the implementation of the distributed FRDs into I and C equipment. The aim of the Engineering Division is to achieve formal FRDs, independent of I and C suppliers. This allows a large improvement for the quality of the specification and the dimensioning of the I and C system before calls for tenders. For the specification phase, studies are almost completed. For the design and the implementation phases, studies and experiments are in progress with European I and C system suppliers. As a conclusion, we present the interest of EDF for standards and especially IEC 1131 improvements. (author). 5 figs.

  1. Nuclear supplier assessment how to control the nuclear supply chain quality?

    International Nuclear Information System (INIS)

    Henckes, A.

    2010-01-01

    With a road map of 84 (low scenario) to 198 (high scenario)* nuclear power plants to be build in the coming decade arise with intensity safety concerns. The challenge for governments and for nuclear companies as they increase construction is to manage a growing army of contractors and subcontractors worldwide and the quality of their production as well as their ability to deliver in time considering the speed-up and increasing pace of project development. Moreover by the last few years, the scope of needs for nuclear companies to set a QA/QC plan all along the supply chain has been increasingly enlarged with new stakes such as cost savings, social responsibilities and technical compliance. At last, with 'nuclear renaissance', the path to renew accreditation of existing suppliers facing international and domestic law/regulations combinations after a long period of low tide is now clear and wide. Nuclear operating companies and EPIC contractors now face a complex situation where on one side political pressure is hugely strong for a zero incident status to be considered as on the contrary the 'renaissance' will be suddenly stopped, on the other the status of 'industrial' maturity of the supply chain candidates is difficult to assess in a uniform and 'fair' way. Through this paper, the speaker will explain the full size supplier assessment strategy from paper to field which has been implemented in the Oil and Gas sector whose requirements of quality is high too. The speaker will present the key practices of this initiative from which the nuclear market can find more than a source of inspiration. (authors)

  2. A NEW 3D DESIGN METHOD FOR FOOTWEAR SOLES USING DELCAM PowerSHAPE-e SYSTEM

    Directory of Open Access Journals (Sweden)

    IONESCU Cozmin

    2016-05-01

    Full Text Available Design methods of soles and soles injection moulds must be accurate, timely and at the same time, accessible to a wide category of soles and injection moulds designers and manufacturers. For designing soles and injection moulds for soles, various dedicated CAD/CAM systems have been developed, such as: Delcam Shoe Solution (3D, Delcam PowerSHAPE-e (2D and 3D, Padsy II (2D and Padsy III (3D, Shoemaster System (2D and 3D, Lectra System (2D and 3D, Parmel System (2D and ATOS II System (3D. These systems are equipped with colour displays, plotters, digitizers, terminals and other equipment dedicated for computer aided design activities. Designing 3D soles models using computer systems enables the prevention of ambiguities inherited from 2D drawings, thus reducing errors and remanufacturing. Depending on the design complexity of soles, the technical means available for copying shoe soles and the technologies at the disposal of the soles manufacturers, soles and injection moulds designers adopt various design methods. Not all CAD/CAM systems are accessible for all users, because often their purchasing costs are high. Design method developed and presented in this paper, uses Delcam PowerSHAPE software program, which has the advantage that it can be accessed free of charge from the manufacturer's website. At the same time, this software program provides the user with all the necessary tools and instruments needed to design the most complex injection moulds and footwear sole.

  3. Hospitals may be bound by terms added in supplier's acceptance of an offer.

    Science.gov (United States)

    Decker, R

    1992-03-01

    A hospital materials manager reports that a supplier is attempting to hold the hospital to new terms that the supplier added in the acceptance of an offer to buy. The offer to buy was made in the hospital's purchase order. In this dialogue, Dr. Decker develops the law relating to such a transaction.

  4. Supplier evaluation in manufacturing environment using compromise ranking method with grey interval numbers

    Directory of Open Access Journals (Sweden)

    Prasenjit Chatterjee

    2012-04-01

    Full Text Available Evaluation of proper supplier for manufacturing organizations is one of the most challenging problems in real time manufacturing environment due to a wide variety of customer demands. It has become more and more complicated to meet the challenges of international competitiveness and as the decision makers need to assess a wide range of alternative suppliers based on a set of conflicting criteria. Thus, the main objective of supplier selection is to select highly potential supplier through which all the set goals regarding the purchasing and manufacturing activity can be achieved. Because of these reasons, supplier selection has got considerable attention by the academicians and researchers. This paper presents a combined multi-criteria decision making methodology for supplier evaluation for given industrial applications. The proposed methodology is based on a compromise ranking method combined with Grey Interval Numbers considering different cardinal and ordinal criteria and their relative importance. A ‘supplier selection index’ is also proposed to help evaluation and ranking the alternative suppliers. Two examples are illustrated to demonstrate the potentiality and applicability of the proposed method.

  5. On competition in a Stackelberg location-design model with deterministic supplier choice

    NARCIS (Netherlands)

    Hendrix, E.M.T.

    2016-01-01

    We study a market situation where two firms maximize market capture by deciding on the location in the plane and investing in a competing quality against investment cost. Clients choose one of the suppliers; i.e. deterministic supplier choice. To study this situation, a game theoretic model is

  6. Organising for Learning - Adaptive and Innovative Learning in Customer-Supplier Relationships

    DEFF Research Database (Denmark)

    Christensen, Poul Rind; Damgaard, Torben; Munksgaard, Kristin B.

    2004-01-01

    Based on studies of supplier associations, the concepts of adaptived and innovative learning in an interoganisational setting are defined and discussed.......Based on studies of supplier associations, the concepts of adaptived and innovative learning in an interoganisational setting are defined and discussed....

  7. Assessing buyer-supplier relationship management : A multiple case-study in the Dutch construction industry

    NARCIS (Netherlands)

    Bemelmans, J.; Voordijk, H.; Vos, G.C.J.M.; Buter, J.

    2012-01-01

    The objective of this paper is to shed light on obstacles to, and opportunities for, increasing the effectiveness of construction firms in managing buyer-supplier relationships. More specifically, the focus is on assessing the maturity level of buyer-supplier relationship management by construction

  8. Dukungan Manajemen Puncak terhadap Strategic Purchasing dalam Berkomunikasi dan Berkolaborasi dengan Supplier untuk Meningkatkan Kinerja Perusahaan

    Directory of Open Access Journals (Sweden)

    Zeplin Jiwa Husada Tarigan

    2009-01-01

    Full Text Available The relationship between buyers and suppliers has received considerable attention in recent years. There are fourth major questions being discussed in this research, i.e. firstly, how to determine the support of the top management to influence strategic purchasing; secondly, how to determine the influence of strategic purchasing to good communication and collaboration with supplier; and thirdly, how to determine the influence of communication and collaboration to supplier involvement; and the last, how to increase enterprise performance by collaboration and supplier involvement. Based on previous research, it is found that top management support influenced to strategic purchasing and effect to communication and collaboration and affect to supplier involvement. Collaboration and supplier involvement have been to influence enterprise performance. According survey by questionnaires to 105 respondent and 98 completed questionnaires were returned. Two responses were considered incomplete and had to be discarded, and this left 96 valid responses. It is found, top management support as an organization don’t have influenced strategic purchasing, but strategic purchasing have impact to communication and collaboration to supplier involvement. Collaboration will bring significant contribution to increase performance, even without the supplier involvement.

  9. Contextualizing Territories in Gvc Supplier Nodes to Understand Chain Entry Barriers

    DEFF Research Database (Denmark)

    Thomsen, Lotte; Kamau, Paul; McCormick, Dorothy

    This paper deals with entry barriers for developing country suppliers to global value chains (GVCs). It is based on a study of food processing firms in Kenya undertaken between 2012 and 2014. The paper focuses on how entry barriers to GVCs are sometimes constructed within supplier countries, and ...

  10. 75 FR 1119 - Agency Information Collection (Supplier Perception Survey) Activity Under OMB Review

    Science.gov (United States)

    2010-01-08

    ... (Supplier Perception Survey) Activity Under OMB Review AGENCY: Office of Acquisition, Logistics and...).'' SUPPLEMENTARY INFORMATION: Title: Department of Veterans Affairs Supplier Perception Survey. OMB Control Number..., and a person is not required to respond to a collection of information unless it displays a currently...

  11. Influence of Product and Supplier Attributes on Hardwood Lumber Purchase Decisions

    Science.gov (United States)

    Craig L. Forbes; Steven A. Sinclair; Robert J. Bush; Philip A. Araman

    1994-01-01

    This study determined the influence of product and supplier attributes on hardwood lumber purchases by wood furniture manufacturers and investigated differences across manufacturer type, geographic region, firm size, and kiln ownership. Professional lumber buyers rated the importance and difference across suppliers of various attributes. Purchase influence scores were...

  12. Customer attractiveness, supplier satisfaction and preferred customer status : a review and a cycle model

    NARCIS (Netherlands)

    Schiele, Holger; Veldman, Jasper; Hüttinger, L.

    2012-01-01

    In this paper, we introduce the concept of preferred customer status, i.e. a buyer is awarded preferential treatment of its important suppliers compared to their other customers. As there is a lack of knowledge of what motivates suppliers to serve selected buyers better than others, our research

  13. A tale of two partnerships : Socialization in the development of buyer-supplier relationships

    NARCIS (Netherlands)

    van de Vijver, M.A.R.; Vos, G.C.J.M.; Akkermans, H.A.

    2011-01-01

    We contribute to the emerging literature on the role of socialization in developing buyer–supplier relationships. We conduct a dyadic, multiple-informant based, longitudinal study of the development of two buyer–supplier relationships. We carry out a detailed examination of the effect of

  14. Creating value in supply chains : suppliers' impact on value for customers, society and shareholders

    NARCIS (Netherlands)

    Kibbeling, M.I.

    2010-01-01

    This dissertation deals with the question how suppliers contribute to creating value in supply chains. The last decades have been characterized by increased specialization of business activities and, consequently, firms have outsourced between 50% and 80% of their business activities to suppliers.

  15. Assessing buyer-supplier relationship management: a multiple case-study in the Dutch construction industry

    NARCIS (Netherlands)

    Bemelmans, Jeroen; Voordijk, Johannes T.; Vos, B.; Buter, J.I.H.

    2012-01-01

    The objective of this paper is to shed light on obstacles to, and opportunities for, increasing the effectiveness of construction firms in managing buyer-supplier relationships. More specifically, the focus is on assessing the maturity level of buyer-supplier relationship management by construction

  16. 78 FR 59701 - Medicare Program; Approval of Accrediting Organization for Suppliers of Advanced Diagnostic...

    Science.gov (United States)

    2013-09-27

    ...] Medicare Program; Approval of Accrediting Organization for Suppliers of Advanced Diagnostic Imaging... accredit suppliers seeking to furnish the technical component (TC) of advanced diagnostic imaging services... advanced diagnostic imaging (ADI) service and establish procedures to ensure that the criteria used by an...

  17. Where to place the saving obligation: Energy end-users or suppliers?

    International Nuclear Information System (INIS)

    Bertoldi, Paolo; Labanca, Nicola; Rezessy, Silvia; Steuwer, Sibyl; Oikonomou, Vlasis

    2013-01-01

    Obligations to save energy differentiate, among other features, by obliged parties. These are obligations on energy suppliers and energy end-users. Supplier obligations have been introduced in North America, Europe and Australia. Under supplier obligations energy suppliers have to comply with mandatory energy saving targets and thus they implement (directly or via third parties) energy efficiency projects on their clients’ premises, or they decide to trade certified project savings if this option is envisaged by their obligation scheme. In several emerging schemes such as the UK Carbon Reduction Commitment (CRC) Energy Efficiency Scheme, the Tokyo Emission Trading Scheme or the Perform Achieve and Trade (PAT) Scheme in India, the obligation to reduce energy consumption is placed on large end-users directly and end-users are allowed to trade emissions allowances or energy saving certificates. The paper starts with presenting these two conceptually different ways for introducing energy saving obligations. Then it analyses advantages and disadvantages of end-users obligations compared to suppliers obligations. The preliminary conclusion of the paper is that supplier obligations seem to be well-suited for the residential sector, but end-user saving obligations may offer advantages when it comes to the industrial and commercial sectors. - Highlights: • We present different ways for introducing energy saving obligations. • We analyse energy end-users obligations vs. supplier obligations. • Supplier obligations seem to be well-suited for the residential sector. • End-user obligations offer advantages in the industrial and commercial sectors

  18. Managing and developing key supplier relationships : An introduction to the special issue, discussion and implications

    NARCIS (Netherlands)

    Ivens, B.; van de Vijver, M.A.R.; Vos, G.C.J.M.

    2013-01-01

    This article provides an introduction to this special issue on managing and developing key supplier relationships. Key suppliers are increasingly seen as strategic assets of buying companies which need careful nurturing to fully utilize their potential for value creation. The six articles of this

  19. Supplier relationship management – anathema for the South African public procurement sector

    Directory of Open Access Journals (Sweden)

    Micheline J. Naude

    2013-07-01

    Full Text Available The public sector is recognised as being one of the most important customer groups for many suppliers and service providers because of the volume of public expenditure. Supplier relationship management (SRM is a necessary tool on which businesses in the public and private sectors rely. However, in the South African public sector, despite the intention to boost service delivery through efficient and effective supplier-management processes, the development of sound supplier relationships is a challenge. The purpose of this article is to provide insight into supplier-relationship challenges and to suggest a framework for implementing SRM in the South African public sector. The research presented is based on a survey using both descriptive and exploratory research. Data were gathered through semi-structured interviews with 15 participants at eight institutions in KwaZulu-Natal. Purposive sampling techniques were used. The findings reveal that the main supplier-related challenges that handicap procurement practices in the province are a lack of experience, a lack of affirmable suppliers, threats and bribes, a lack of integrity, an inability to meet delivery deadlines and quality issues. The findings further reveal that supplier relationships in the public sector are of a transactional nature. A five-stage framework is therefore recommended for implementing SRM in the South African public sector and in order to assist government procurement officials to reap the benefits of SRM whilst supporting the requirements of public-sector procurement.

  20. Key Supplier Relationship Management: The Case of Croatian Medium-Sized and Large Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Dario Miočević

    2011-06-01

    Full Text Available The key supplier relationship management represents a vital organizational process. Companies should pay attention not only to managing customer relationships but also to managing relationships with suppliers in order to perform well. They should identify the extent to which a certain supplier adds value through the procurement process. In this line of reasoning, both theory and practice make a distinction between strategic (key and non-strategic (transactional suppliers. By employing the segmentation of the supply market, companies balance their supplier portfolio and are capable of identifying the key suppliers. They can also develop specific programs and initiatives that are aimed at preserving these relationships. In the empirical part of the paper, a survey was conducted on a sample of 123 medium-sized and large Croatian manufacturing companies. The structural model involving the relationship between the key supplier relationship management and value-oriented purchasing was tested. The results indicate that there is a statistically direct, positive and significant relationship between these two constructs. Likewise, the results stress that a theoretical conceptualization and operationalization of the key supplier relationship management construct is both valid and justified. Finally, the theoretical and practical implications and limitations of this study are offered.

  1. Don't trust trust : a dynamic approach towards controlling supplier involvement in NPD

    NARCIS (Netherlands)

    Smets, L.P.M.; Oorschot, van K.E.; Langerak, F.

    2013-01-01

    Prior literature stresses the importance for manufacturers to use formal and informal controls to coordinate collaborative new product development activities with suppliers. In doing so, the existence of trust between manufacturers and suppliers is believed to play a key role because it enables

  2. Management Model for Evaluation and Selection of Engineering Equipment Suppliers for Construction Projects in Iraq

    Directory of Open Access Journals (Sweden)

    Kadhim Raheem Erzaij

    2016-06-01

    Full Text Available Engineering equipment is essential part in the construction project and usually manufactured with long lead times, large costs and special engineering requirements. Construction manager targets that equipment to be delivered in the site need date with the right quantity, appropriate cost and required quality, and this entails an efficient supplier can satisfy these targets. Selection of engineering equipment supplier is a crucial managerial process .it requires evaluation of multiple suppliers according to multiple criteria. This process is usually performed manually and based on just limited evaluation criteria, so better alternatives may be neglected. Three stages of survey comprised number of public and private companies in Iraqi construction sector were employed to identify main criteria and sub criteria for supplier selection and their priorities.The main criteria identified were quality of product, commercial aspect, delivery, reputation and position, and system quality . An effective technique in multiple criteria decision making (MCDM as analytical hierarchy process (AHP have been used to get importance weights of criteria based on experts judgment. Thereafter, a management software system for Evaluation and Selection of Engineering Equipment Suppliers (ESEES has been developed based on the results obtained from AHP. This model was validated in a case study at municipality of Baghdad involved actual cases of selection pumps suppliers for infrastructure projects .According to experts, this model can improve the current process followed in the supplier selection and aid decision makers to adopt better choices in the domain of selection engineering equipment suppliers.

  3. Simulation embedded artificial intelligence search method for supplier trading portfolio decision

    DEFF Research Database (Denmark)

    Feng, Donghan; Yan, Z.; Østergaard, Jacob

    2010-01-01

    An electric power supplier in the deregulated environment needs to allocate its generation capacities to participate in contract and spot markets. Different trading portfolios will provide suppliers with different future revenue streams of various distributions. The classical mean-variance (MV) m...

  4. 47 CFR 68.350 - Revocation of Supplier's Declaration of Conformity.

    Science.gov (United States)

    2010-10-01

    ... Conformity. 68.350 Section 68.350 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON... Terminal Equipment Approval § 68.350 Revocation of Supplier's Declaration of Conformity. (a) The Commission may revoke any Supplier's Declaration of Conformity for cause in accordance with the provisions of...

  5. The influence of the sustainability agenda on buyer-supplier relationships

    DEFF Research Database (Denmark)

    Jørsfeldt, Liliyana Makarowa; Wæhrens, Brian Vejrum

    2013-01-01

    The positive effect of supplier-buyer relationships on supply chain performance has al-ready been supported by previous studies. Yet, little empirical research has explored how the sustainability agenda influences these relationships. Thus, this study investi-gates how supplier-buyer relationships...

  6. Protein as a sole source of nitrogen for in vitro grown tobacco plantlets

    Czech Academy of Sciences Publication Activity Database

    Synková, Helena; Hýsková, V.; Garčeková, K.; Křížová, S.; Ryšlavá, H.

    2016-01-01

    Roč. 60, č. 4 (2016), s. 635-644 ISSN 0006-3134 Institutional support: RVO:61389030 Keywords : glutamate-dehydrogenase * inorganic nitrogen * nitrate transport * organic nitrogen * amino-acids * metabolism * seedlings * leaves * roots * assimilation * ammonium * casein * chlorophyll fluorescence * nitrate * photosynthesis Subject RIV: EF - Botanics Impact factor: 1.551, year: 2016

  7. 78 FR 60875 - Assistant Secretary for Preparedness and Response; Notification of a Sole Source Cooperative...

    Science.gov (United States)

    2013-10-02

    ..., bridges, housing stock, commercial structures, etc) and/or business and commercial recovery.\\i\\ Oftentimes absent from consideration is the critical importance of health, and the public health, medical and social... development. Ecology and Society 13(1): 9. [online] URL: http://www.ecologyandsociety.org/vol13/iss1/art9...

  8. 78 FR 54652 - Sole Source Cooperative Agreement Award to the Association for State and Territorial Health...

    Science.gov (United States)

    2013-09-05

    ... coordinate their respective national health security roles and responsibilities to achieve community health... and territorial health officials, which play a critical role in building community health resilience... resilience. SHDs and territorial health officials are intimately familiar with the communities and...

  9. Oil-in-oil emulsions stabilised solely by solid particles.

    Science.gov (United States)

    Binks, Bernard P; Tyowua, Andrew T

    2016-01-21

    A brief review of the stabilisation of emulsions of two immiscible oils is given. We then describe the use of fumed silica particles coated with either hydrocarbon or fluorocarbon groups in acting as sole stabilisers of emulsions of various vegetable oils with linear silicone oils (PDMS) of different viscosity. Transitional phase inversion of emulsions, containing equal volumes of the two oils, from silicone-in-vegetable (S/V) to vegetable-in-silicone (V/S) occurs upon increasing the hydrophobicity of the particles. Close to inversion, emulsions are stable to coalescence and gravity-induced separation for at least one year. Increasing the viscosity of the silicone oil enables stable S/V emulsions to be prepared even with relatively hydrophilic particles. Predictions of emulsion type from calculated contact angles of a silica particle at the oil-oil interface are in agreement with experiment provided a small polar contribution to the surface energy of the oils is included. We also show that stable multiple emulsions of V/S/V can be prepared in a two-step procedure using two particle types of different hydrophobicity. At fixed particle concentration, catastrophic phase inversion of emulsions from V/S to S/V can be effected by increasing the volume fraction of vegetable oil. Finally, in the case of sunflower oil + 20 cS PDMS, the study is extended to particles other than silica which differ in chemical type, particle size and particle shape. Consistent with the above findings, we find that only sufficiently hydrophobic particles (clay, zinc oxide, silicone, calcium carbonate) can act as efficient V/S emulsion stabilisers.

  10. Multi-Criteria Decision Making For Determining A Simple Model of Supplier Selection

    Science.gov (United States)

    Harwati

    2017-06-01

    Supplier selection is a decision with many criteria. Supplier selection model usually involves more than five main criteria and more than 10 sub-criteria. In fact many model includes more than 20 criteria. Too many criteria involved in supplier selection models sometimes make it difficult to apply in many companies. This research focuses on designing supplier selection that easy and simple to be applied in the company. Analytical Hierarchy Process (AHP) is used to weighting criteria. The analysis results there are four criteria that are easy and simple can be used to select suppliers: Price (weight 0.4) shipment (weight 0.3), quality (weight 0.2) and services (weight 0.1). A real case simulation shows that simple model provides the same decision with a more complex model.

  11. Supplier integration in product development: A matter of designing the project structure

    Directory of Open Access Journals (Sweden)

    Mike Danilovic

    2007-11-01

    Full Text Available In product development close collaboration between systems integrators and suppliers is important. The purpose of this article is to investigate the impact of the work breakdown structure (WBS and work packages (WPs in product development on the possibility of carrying through the strategy of supplier involvement into collaborative practice and to investigate how supplier involvement can be improved by altering the design of collaborative WBS and WP structures. Dependence Structure Matrix (DSM is introduced in order to analyse, visualise and manage interdependencies, in terms of information exchange between the systems integrator and supplier. This article shows how DSM can support the alternative design of integrated and collaborative WBS and integrated WPs following the logic of dependencies and the flow of information in order to support a strategy focusing on integration of suppliers on project and team level.

  12. A multi-criteria decision making approach for supplier selection in the flexible packaging industry

    Directory of Open Access Journals (Sweden)

    Cristea Ciprian

    2017-01-01

    Full Text Available The supplier selection problem represents one of the most important components of the supply chain management. This article presents a multiple criteria decision making analysis contributing to the selection of the most convenient supplier in the flexible packaging industry. Due to the fact that in today's supply chain management, the performance of potential suppliers is evaluated against multiple criteria rather than taking into account only the cost factor, the appropriate criteria in the supplier selection have been identified, and the considered variants are assessed, considering the decision maker’s preferences and existing constraints. The variants are ranked in terms of their suitability for selecting a supplier with the use of Electre III method. The results obtained from the simulation experiment suggest that this methodology is a feasible decision support model.

  13. Application of integrated QFD and fuzzy AHP approach in selection of suppliers

    Directory of Open Access Journals (Sweden)

    Bojana Jovanović

    2014-10-01

    Full Text Available Supplier selection is a widely considered issue in the field of management, especially in quality management. In this paper, in the selection of suppliers of electronic components we used the integrated QFD and fuzzy AHP approaches. The QFD method is used as a tool for translating stakeholder needs into evaluating criteria for suppliers. The fuzzy AHP approach is used as a tool for prioritizing stakeholders, stakeholders’ requirements, evaluating criteria and, finally, for prioritizing suppliers. The paper showcases a case study of implementation of the integrated QFD and fuzzy AHP approaches in the selection of the electronic components supplier in one Serbian company that produces electronic devices. Also presented is the algorithm of implementation of the proposed approach. To the best of our knowledge, this is the first implementation of the proposed approach in a Serbian company.

  14. A mathematical model for order splitting in a multiple supplier single-item inventory system

    DEFF Research Database (Denmark)

    Abginehchi, Soheil; Farahani, Reza Zanjirani; Rezapour, Shabnam

    2013-01-01

    systems. The item acquisition lead times of suppliers are random variables. Backorder is allowed and shortage cost is charged based on not only per unit in shortage but also per time unit. Continuous review (s,Q) policy has been assumed. When the inventory level depletes to a reorder level, the total...... order is split among n suppliers. Since the suppliers have different characteristics, the quantity ordered to different suppliers may be different. The problem is to determine the reorder level and quantity ordered to each supplier so that the expected total cost per time unit, including ordering cost......, procurement cost, inventory holding cost, and shortage cost, is minimized. We also conduct extensive numerical experiments to show the advantages of our model compared with the models in the literature. According to our extensive experiments, the model developed in this paper is the best model...

  15. Improve strategic supplier performance using DMAIC to develop a Quality Improvement Plan

    Science.gov (United States)

    Jardim, Kevin P.

    Supplier performance that meets the requirements of the customer has long plagued quality professionals. Despite the vast efforts by organizations to improve supplier performance, little has been done to standardize the plan to improve performance. This project presents a guideline and problem-solving strategy using a Define, Measure, Analyze, Improve, and Control (DMAIC) structured tool that will assist in the management and improvement of supplier performance. An analysis of benchmarked Quality Improvement Plans indicated that this topic needs more focus on how to accomplish improved supplier performance. This project is part of a growing body of supplier continuous improvement efforts. With the input of Zodiac Aerospace quality professionals this project's results provide a solution to Quality Improvement Plans and show objective evidence of its benefits. This project contributes to the future research on similar topics.

  16. Strategic Wholesale Pricing for an Incumbent Supplier Facing with a Competitive Counterpart

    Directory of Open Access Journals (Sweden)

    Jianwu Sun

    2014-01-01

    Full Text Available We introduce a wholesale pricing strategy for an incumbent supplier facing with a competitive counterpart. We propose a profit function which considers both the present loss and future loss from a wholesale price and then study the optimal wholesale prices for different objectives about this profit function for the incumbent supplier. First, we achieve an optimal wholesale price for the incumbent supplier to maximize his expected profit. Then, to reduce the risk originating from the fluctuation in the competitive supplier’s wholesale price, we integrate the conditional value-at-risk (CVaR measure in financial risk management into this study and derive an optimal wholesale price to maximize CVaR about profit for the incumbent supplier. Besides, the properties of the two optimal wholesale prices are discussed. Finally, some management insights are suggested for the incumbent supplier in a competitive setting.

  17. Novel Distance Measure in Fuzzy TOPSIS for Supply Chain Strategy Based Supplier Selection

    Directory of Open Access Journals (Sweden)

    B. Pardha Saradhi

    2016-01-01

    Full Text Available In today’s highly competitive environment, organizations need to evaluate and select suppliers based on their manufacturing strategy. Identification of supply chain strategy of the organization, determination of decision criteria, and methods of supplier selection are appearing to be the most important components in research area in the field of supply chain management. In this paper, evaluation of suppliers is done based on the balanced scorecard framework using new distance measure in fuzzy TOPSIS by considering the supply chain strategy of the manufacturing organization. To take care of vagueness in decision making, trapezoidal fuzzy number is assumed for pairwise comparisons to determine relative weights of perspectives and criteria of supplier selection. Also, linguistic variables specified in terms of trapezoidal fuzzy number are considered for the payoff values of criteria of the suppliers. These fuzzy numbers satisfied the Jensen based inequality. A detailed application of the proposed methodology is illustrated.

  18. A study of combined evaluation of suppliers based on correlation

    Directory of Open Access Journals (Sweden)

    Heting Qiu

    2013-03-01

    Full Text Available Purpose: The Selection of logistics service providers is an important issue in supply chain management. But different evaluation methods may lead to different results, which could cause inconsistent conclusions. This paper makes use of a new perspective to combine with a variety of methods to eliminate the deviation of different single evaluation methods. Design/methodology/approach: This paper expounds the application of the combined evaluation method based on correlation. Entropy method, factor analysis, grey colligation evaluation and AHP have been used for research. Findings: According to the evaluate result, the ranking of suppliers obtained by each method have obvious differences. The result shows that combined evaluation method can eliminate the deviation of different single evaluation methods. Originality/value: The combined evaluation method makes up for the defects of single evaluation methods and obtains a result that is more stable and creditable with smaller deviation. This study can provide the enterprise leaders with more scientific method to select their cooperative companies. 

  19. E-commerce platform acceptance suppliers, retailers, and consumers

    CERN Document Server

    Chan, Hing; Yip, Nick

    2014-01-01

    This book aims to offer a comprehensive overview of the issues facing organizations when deciding whether to accept e-commerce as a platform for business. It provides a detailed evaluation of how the implementation of e-commerce may affect all parties within the supply chain: suppliers, retailers and consumers. It also compares various opportunities and threats of accepting e-commerce in order to conclude whether it might offer access to a new digital era, or whether it is an uncertain option yielding potential pitfalls. This book helps to reveal existing and future consequences of e-commerce acceptance, which are crucial for business decisions and operations in the present and going forward. It therefore provides a unique insight into emerging e-commerce platform acceptance, and is one of the first to provide a holistic perspective of how each party in the supply chain is affected  by e-commerce acceptance. E-commerce is bringing into view more flexible, effective and efficient ways of conducting business a...

  20. Desktop war - data suppliers competing for bigger market share

    International Nuclear Information System (INIS)

    Sword, M.

    1999-01-01

    The intense competition among suppliers of computerized data and computer software to the petroleum and natural gas industry in western Canada is discussed. It is estimated that the Canadian oil patch spends a large sum, about $ 400 million annually on geoscience information and related costs and industry is looking for ways to significantly reduce those costs. There is a need for integrated, desktop driven data sets. Sensing the determination of industry to reduce information acquisition costs, data providers are responding with major consolidation of data sets. The major evolution in the industry is on-line access to increase the speed of information delivery. Data vendors continue to integrate land, well, log, production and other data sets whether public or proprietary. The result is stronger foundations as platforms for interpretive software. Another development is the rise of the Internet and Intranets and the re-definition of the role of information technology departments in the industry as both of these are paving the way for electronic delivery of information and software tools to the desktop. Development of proprietary data sets, acquisition of competitors with complimentary data sets that enhances products and services are just some of the ways data vendors are using to get a bigger piece of the exploration and development pie

  1. Yarn supplier selection using analytical hierarchy process (AHP) and standardized unitless rating (SUR) method on textile industry

    Science.gov (United States)

    Erfaisalsyah, M. H.; Mansur, A.; Khasanah, A. U.

    2017-11-01

    For a company which engaged in the textile field, specify the supplier of raw materials for production is one important part of supply chain management which can affect the company's business processes. This study aims to identify the best suppliers of raw material suppliers of yarn for PC. PKBI based on several criteria. In this study, the integration between the Analytical Hierarchy Process (AHP) and the Standardized Unitless Rating (SUR) are used to assess the performance of the suppliers. By using AHP, it can be known the value of the relative weighting of each criterion. While SUR shows the sequence performance value of the supplier. The result of supplier ranking calculation can be used to know the strengths and weaknesses of each supplier based on its performance criteria. From the final result, it can be known which suppliers should improve their performance in order to create long term cooperation with the company.

  2. Data Quality, Provenance and IPR Management services: their role in empowering geospatial data suppliers and users

    Science.gov (United States)

    Millard, Keiran

    2015-04-01

    This paper looks at current experiences of geospatial users and geospatial suppliers and how they have been limited by suitable frameworks for managing and communicating data quality, data provenance and intellectual property rights (IPR). Current political and technological drivers mean that increasing volumes of geospatial data are available through a plethora of different products and services, and whilst this is inherently a good thing it does create a new generation of challenges. This paper consider two examples of where these issues have been examined and looks at the challenges and possible solutions from a data user and data supplier perspective. The first example is the IQmulus project that is researching fusion environments for big geospatial point clouds and coverages. The second example is the EU Emodnet programme that is establishing thematic data portals for public marine and coastal data. IQmulus examines big geospatial data; the data from sources such as LIDAR, SONAR and numerical simulations; these data are simply too big for routine and ad-hoc analysis, yet they could realise a myriad of disparate, and readily useable, information products with the right infrastructure in place. IQmulus is researching how to deliver this infrastructure technically, but a financially sustainable delivery depends on being able to track and manage ownership and IPR across the numerous data sets being processed. This becomes complex when the data is composed of multiple overlapping coverages, however managing this allows for uses to be delivered highly-bespoke products to meet their budget and technical needs. The Emodnet programme delivers harmonised marine data at the EU scale across seven thematic portals. As part of the Emodnet programme a series of 'check points' have been initiated to examine how useful these services and other public data services actually are to solve real-world problems. One key finding is that users have been confused by the fact that often

  3. Supplier Integration in Category Management : A case study of the situational impact on relationship performance and interdependence

    OpenAIRE

    Ellström, Daniel

    2015-01-01

    Supplier integration in category management means that a supplier takes part in the activities that are traditionally performed by retailers. These activities are the selection of which products to sell, decisions on how to price and market the products, and making sure that the products are delivered to the stores in a timely manner. Depending on the situation, an integration of suppliers in these activities can be more or less suitable. As more research is needed to understand when supplier...

  4. Supplier evaluation system of the wood processing enterprise in the region of the CZ, SK, HU and AT

    OpenAIRE

    Muselíková, Vladislava

    2015-01-01

    The Bachelor thesis Supplier evaluation system of the wood processing enterprise in the region of the CR, the SK, HU and AT deals with the analysis of the current supplier evaluation system in IKEA Industry company in Malacky. The theoretical part is based on literature review and contains a description of the purchasing process and methodology for selection and evaluation of suppliers. The practical part is devoted to the analysis of the Supplier Classification in IKEA. The main output of th...

  5. A Qualitative Study into the Supplier Selection Decision-Making Process in the Malaysian SME Manufacturing Industry

    OpenAIRE

    Rahaman, F.J.

    2017-01-01

    In manufacturing, supplier selection is viewed as the foundation of supply chain management, as the choice of the supplier will inherently affect all other aspects of business. This study explores the supplier selection decision-making process within Malaysian manufacturing firms. Previous studies in supplier selection have focused on company performance and quality management. Preceding research in this field, offers evidence that the application of information technology tools, business int...

  6. Addressing the Challenges of Sharing Lessons Learned Amongst Suppliers in a Fragmented and Competitive Marketplace

    International Nuclear Information System (INIS)

    Dennier, D.

    2016-01-01

    Historically, COG member utilities largely drew from in-house supporting functions or the original plant designers, allowing active sharing of operational and human performance experience amongst a small number of relevant parties. As the industry has evolved, utilities have increasingly drawn upon a greater number of independent external suppliers to provide goods and services. This diversification in supplier base within a competitive environment changes operating dynamics, as a safety culture-focused supplier must remain mindful of developing and retaining competitive advantages over other suppliers. A market-driven perspective may undermine the likelihood of sharing certain lessons learned and best practices for fear of weakening competitive position. Utility procurement procedures must ensure fair markets to be effective, but in doing so may limit opportunity for collaboration between supplier and utility compared to historic levels. Vibrant competitive markets attract a large number of suppliers, which adds to the complexity of effective sharing and absorption of industry lessons learned. This paper will explain the activities underway through the COG Supplier Participant program to remove impediments and share industry-wide operational lessons learned and best practices. (author)

  7. SUPPLIER SELECTION CRITERIA IN A POWER UTILITY IN MALAYSIA: ENGINEERS’ PERCEPTIONS

    Directory of Open Access Journals (Sweden)

    Sivadass Thiruchelvam

    2012-06-01

    Full Text Available Supplier selection of electricity generating, transmitting and distributing systems is part of the problem-solving environment in a power utility because it is a long-term investment for the organisation. Therefore, the decision over supplier selection directly influences the operational and financial position of a power utility. In addition, the supplier selection of a power-related system is a complex multi-criteria decision problem. While some criteria may be common across different industries, there are some criteria unique to the power industry. This research aims to understand what constitutes the suitable supplier selection criteria for a power utility. This study reveals some interesting findings of how engineers perceive the importance of each criterion and suggests strongly that product quality, price and delivery are key determinants in the supplier evaluation process. The eighteen criteria considered for this study were mapped onto their respective cluster, namely: supplier’s organisational system and technology, buyer-supplier relationship and economic value. The findings of this study should assist various groups of stakeholders (e.g., suppliers, buyers and end users to gain a better understanding of social behaviour in making purchase decisions, particularly with regard to power utilities.

  8. A decision support tool for sustainable supplier selection in manufacturing firms

    Directory of Open Access Journals (Sweden)

    Ifeyinwa Orji

    2014-10-01

    Full Text Available Purpose: Most original equipment manufacturers (OEMs are strategically involved in supplier base rationalization and increased consciousness of sustainable development thus, reinforcing need for accurately considering sustainability in supplier selection to improve organizational performance. In real industrial case, imprecise data, ambiguity of human judgment, uncertainty among sustainability factors and the need to capture all subjective and objective criteria are unavoidable and pose huge challenge to accurately incorporate sustainability factors into supplier selection.Methodology: This study develops a model based on integrated multi- criteria decision making (MCDM methods to solve such problems. The developed model applies Fuzzy logic, DEMATEL and TOPSIS to effectively analyze the interdependencies between sustainability criteria and to select the best sustainable supplier in fuzzy environment while capturing all subjective and objective criteria. A case study is illustrated to test the proposed model in a gear manufacturing company, an OEM to provide insights and for practical applications.Findings: Results show that social factors of sustainability ranks as the most important in supplier selection. However, the most influential sustainability sub- criteria are work safety (WS and quality.Originality/Value: The model is capable of capturing all subjective and objective criteria in fuzzy environment to accurately incorporate sustainability factors in supplier selection. It is decision support tool relevant for providing insights to managers while implementing sustainable supplier selection.

  9. ANTECEDENTS OF SUPPLIER RELATION QUALITY IN THE GHANAIAN CONSTRUCTION SUPPLY CHAIN

    Directory of Open Access Journals (Sweden)

    F K Bondinuba

    2016-07-01

    Full Text Available Effective and efficient management of suppliers within a supply chain is an essential requirement for improving organisational performance within construction companies. However, factors inherent within the supply chain of supplier-buyer exchanges such as culture, politics, dependence and trust may influence supplier relationship quality (SRQ. This research therefore seeks to identify the influence that these factors have upon SRQ in the Ghanaian construction industry and develop a conceptual framework that explains the interconnectivity between them. A literature review is used to develop a conceptual framework of the antecedents influencing supplier relationship quality. Primary ‘perception’ data obtained from 152 building material suppliers is used to test the proposed model using Partial Least Squares (PLS. Findings reveal that culture, politics, dependence and trust have a significant influence on relationship quality in supply chain collaborations amongst purchasers and suppliers of building materials. While politics has a strong influence on dependence, it also generates a negative influence on SRQ and trust. The research confirms the positive effect of trust and dependence in SRQ management and extends understanding of the influence of culture and politics. Practical implications suggest that managers of building material suppliers should focus upon building trust and dependence and be discouraged from over-reliance upon politics and political affiliations as a basis for long-term relationship building.

  10. A hybrid agent-based computational economics and optimization approach for supplier selection problem

    Directory of Open Access Journals (Sweden)

    Zahra Pourabdollahi

    2017-12-01

    Full Text Available Supplier evaluation and selection problem is among the most important of logistics decisions that have been addressed extensively in supply chain management. The same logistics decision is also important in freight transportation since it identifies trade relationships between business establishments and determines commodity flows between production and consumption points. The commodity flows are then used as input to freight transportation models to determine cargo movements and their characteristics including mode choice and shipment size. Various approaches have been proposed to explore this latter problem in previous studies. Traditionally, potential suppliers are evaluated and selected using only price/cost as the influential criteria and the state-of-practice methods. This paper introduces a hybrid agent-based computational economics and optimization approach for supplier selection. The proposed model combines an agent-based multi-criteria supplier evaluation approach with a multi-objective optimization model to capture both behavioral and economical aspects of the supplier selection process. The model uses a system of ordered response models to determine importance weights of the different criteria in supplier evaluation from a buyers’ point of view. The estimated weights are then used to calculate a utility for each potential supplier in the market and rank them. The calculated utilities are then entered into a mathematical programming model in which best suppliers are selected by maximizing the total accrued utility for all buyers and minimizing total shipping costs while balancing the capacity of potential suppliers to ensure market clearing mechanisms. The proposed model, herein, was implemented under an operational agent-based supply chain and freight transportation framework for the Chicago Metropolitan Area.

  11. Influence of innovation in the customer-supplier re lationship on competitive advantage

    Directory of Open Access Journals (Sweden)

    Božidar Lenarčič

    2012-10-01

    Full Text Available RQ: The excellence of a company is also the result of the relationship to the supplier. A good relationship is shown on the results in developing innovative ideas. In this study we were interested in the relations between the buyer and the supplier and how this effects their innovation development, which is later expressed as a competitive advantage, and if this relation effectson the creation of innovation ideas.Purpose: The purpose is to explore the relationship between suppliers and customers, their common innovative activity and the impact of joint innovation ideas in competitive advantage.Method: A literature review and a quantitative analysis with an opinion questionnaire was used in this study. Data analysis was carried out with frequency statistics and χ2-test.Results: The result shows that the relationship between buyers and suppliers has a greater impact on competitive advantage than the number of innovations.Organization: The research study impacts the customer-supplier relationship, mutual expectations and common creation of innovative ideas to increase competitive advantage. The results will be informative in adapting decisions and measures in strengthening the relationship for the creation of an innovative environment withininterpersonal relationships.Society: Society is aware of the importance of customer-supplier relations. Society will be able to obtain information on the degree of the customer-supplier mutual relationship in collaborating and developing innovative ideas, the level of awareness in the importance of innovation in the mutual relation of creating a competitive advantage.Originality: The originality of the research is to learn aboutthe impact of customer-supplier relations and on innovation as one of an organization’s competitive advantages.Limitations: The research is limited to one company and a smaller sample-size of suppliers in an organization.

  12. Effect of rocker-soled shoes on parameters of knee joint load in knee osteoarthritis.

    Science.gov (United States)

    Madden, Elizabeth G; Kean, Crystal O; Wrigley, Tim V; Bennell, Kim L; Hinman, Rana S

    2015-01-01

    This study evaluated the immediate effects of rocker-soled shoes on parameters of the knee adduction moment (KAM) and pain in individuals with knee osteoarthritis (OA). Three-dimensional gait analysis was performed on 30 individuals (mean (SD): age, 61 (7) yr; 15 (50%) male) with radiographic and symptomatic knee OA under three walking conditions in a randomized order: i) wearing rocker-soled shoes (Skechers Shape-ups), ii) wearing non-rocker-soled shoes (ASICS walking shoes), and iii) barefoot. Peak KAM and KAM angular impulse were measured as primary indicators of knee load distribution. Secondary measures included the knee flexion moment (KFM) and knee pain during walking. Peak KAM was significantly lower when wearing the rocker-soled shoes compared with that when wearing the non-rocker-soled shoes (mean difference (95% confidence interval), -0.27 (-0.42 to -0.12) N·m/BW × Ht%; P < 0.001). Post hoc tests revealed no significant difference in KAM impulse between rocker-soled and non-rocker-soled shoe conditions (P = 0.13). Both peak KAM and KAM impulse were significantly higher during both shoe conditions compared with those during the barefoot condition (P < 0.001). There were no significant differences in KFM (P = 0.36) or knee pain (P = 0.89) between conditions. Rocker-soled shoes significantly reduced peak KAM when compared with non-rocker-soled shoes, without a concomitant change in KFM, and thus may potentially reduce medial knee joint loading. However, KAM parameters in the rocker-soled shoes remained significantly higher than those during barefoot walking. Wearing rocker-soled shoes did not have a significant immediate effect on walking pain. Further research is required to evaluate whether rocker-soled shoes can influence symptoms and progression of knee OA with prolonged wear.

  13. 42 CFR 414.50 - Physician or other supplier billing for diagnostic tests performed or interpreted by a physician...

    Science.gov (United States)

    2010-10-01

    ... HEALTH SERVICES Physicians and Other Practitioners § 414.50 Physician or other supplier billing for... services through such billing physician or other supplier. The “substantially all” requirement will be satisfied if, at the time the billing physician or other supplier submits a claim for a service furnished by...

  14. Supplier managed inventory in the OEM supply chain : the impact of relationship types on total costs and cost distribution

    NARCIS (Netherlands)

    Nyen, van P.L.M.; Bertrand, J.W.M.; Ooijen, van H.P.G.; Vandaele, N.J.

    2009-01-01

    We investigate the impact of four variants of supplier managed inventory on total costs and cost distribution in a capital goods supply chain consisting of a parts supplier who delivers parts to an original equipment manufacturer’s assembly plant. The four supplier managed inventory variants differ

  15. The new regulator in town : The effect of Walmart’s sustainability mandate on supplier shareholder value

    NARCIS (Netherlands)

    Gielens, K.J.P.; Geyskens, Inge; Deleersnyder, Barbara; Nohe, Max

    Suppliers are increasingly forced by dominant retailers to clean up their supply chains. While these retailers argue that their sustainability mandates may translate into profits for suppliers, many suppliers are cynical about these mandates because the onus to undertake the required investments is

  16. The Nuclear Suppliers Group Information Sharing (NISS): Putting technology to work for a more effective and efficient supplier arrangement

    International Nuclear Information System (INIS)

    Dedik, T.; Goorevich, R.S.; Thorne, C.E.

    1995-01-01

    The need for accurate and complete information and the need to have the information in a timely manner are needs which permeate the Guidelines of the Nuclear Suppliers Group (NSG), both Parts 1 and 2. In response to these needs, the US Department of Energy is sponsoring the development and deployment of a computerized information sharing system among all of the member states of the NSG and at the Permanent Mission of Japan in Vienna, the NSG Point of Contact or Secretariat. The system when fully deployed and operation will be supportive of both the nuclear nonproliferation objectives and the commercial interests of the member states by access to a wide range of policy and technical information. The NSG Information Sharing System, or NISS, has three major components. The first feature of the NISS is its ability to rapidly transmit notifications of export denials to export control officials in the capitals of the member states. An electronic mail capability will provide a means of informal communications among persons engaged in all aspects of the work of the NSG, including license review and preparation for the meetings of the Group. A final feature of the NISS is its ability to provide rapid access to a comprehensive library of reference documents and a complete and up-to-date set of records of the NSG meetings

  17. A robust optimisation approach to the problem of supplier selection and allocation in outsourcing

    Science.gov (United States)

    Fu, Yelin; Keung Lai, Kin; Liang, Liang

    2016-03-01

    We formulate the supplier selection and allocation problem in outsourcing under an uncertain environment as a stochastic programming problem. Both the decision-maker's attitude towards risk and the penalty parameters for demand deviation are considered in the objective function. A service level agreement, upper bound for each selected supplier's allocation and the number of selected suppliers are considered as constraints. A novel robust optimisation approach is employed to solve this problem under different economic situations. Illustrative examples are presented with managerial implications highlighted to support decision-making.

  18. A Combined group EA-PROMETHEE method for a supplier selection problem

    Directory of Open Access Journals (Sweden)

    Hamid Reza Rezaee Kelidbari

    2016-07-01

    Full Text Available One of the important decisions which impacts all firms’ activities is the supplier selection problem. Since the 1950s, several works have addressed this problem by treating different aspects and instances. In this paper, a combined multiple criteria decision making (MCDM technique (EA-PROMETHEE has been applied to implement a proper decision making. To this aim, after reviewing the theoretical background regarding to supplier selection, the extension analysis (EA is used to determine the importance of criteria and PROMETHEE for appraisal of suppliers based on the criteria. An empirical example illustrated the proposed approach.

  19. A parallel optimization method for product configuration and supplier selection based on interval

    Science.gov (United States)

    Zheng, Jian; Zhang, Meng; Li, Guoxi

    2017-06-01

    In the process of design and manufacturing, product configuration is an important way of product development, and supplier selection is an essential component of supply chain management. To reduce the risk of procurement and maximize the profits of enterprises, this study proposes to combine the product configuration and supplier selection, and express the multiple uncertainties as interval numbers. An integrated optimization model of interval product configuration and supplier selection was established, and NSGA-II was put forward to locate the Pareto-optimal solutions to the interval multiobjective optimization model.

  20. The Study of an Integrated Rating System for Supplier Quality Performance in the Semiconductor Industry

    Science.gov (United States)

    Lee, Yu-Cheng; Yen, Tieh-Min; Tsai, Chih-Hung

    This study provides an integrated model of Supplier Quality Performance Assesment (SQPA) activity for the semiconductor industry through introducing the ISO 9001 management framework, Importance-Performance Analysis (IPA) Supplier Quality Performance Assesment and Taguchi`s Signal-to-Noise Ratio (S/N) techniques. This integrated model provides a SQPA methodology to create value for all members under mutual cooperation and trust in the supply chain. This method helps organizations build a complete SQPA framework, linking organizational objectives and SQPA activities to optimize rating techniques to promote supplier quality improvement. The techniques used in SQPA activities are easily understood. A case involving a design house is illustrated to show our model.