WorldWideScience

Sample records for softwood based celotex

  1. WHITE PAPER: DEMONSTRATION OF EQUIVALENCY OF CANE AND SOFTWOOD BASED CELOTEX FOR 9975 PACKAGING

    Varble, J

    2007-01-01

    Cane-based Celotex(trademark) has been used extensively in various DOE packages as a thermal insulator and impact absorber. Cane-based Celotex(trademark) for the 9975 was manufactured by Knight-Celotex Fiberboard at their Marrero Plant in Louisiana. However, Knight-Celotex Fiberboard shut down their Marrero Plant in early 2007 due to impacts from hurricane Katrina and other economic factors. Therefore, cane-based Celotex(trademark) is no longer available for use in the manufacture of new 9975 packages. Knight-Celotex Fiberboard has Celotex(trademark) manufacturing plants in Danville, VA and Sunbury, PA that use softwood and hardwood, respectively, as a raw material in the manufacturing of Celotex(trademark). The purpose of this White Paper is to demonstrate that softwood-based Celotex(trademark) from the Knight-Celotex Danville Plant has performance equivalent to cane-based Celotex(trademark) from the Knight-Celotex Marrero Plant for transportation in a 9975 package

  2. DEMONSTRATION OF EQUIVALENCY OF CANE AND SOFTWOOD BASED CELOTEX FOR MODEL 9975 SHIPPING PACKAGES

    Watkins, R; Jason Varble, J

    2008-01-01

    Cane-based Celotex(trademark) has been used extensively in various Department of Energy (DOE) packages as a thermal insulator and impact absorber. Cane-based Celotex(trademark) fiberboard was only manufactured by Knight-Celotex Fiberboard at their Marrero Plant in Louisiana. However, Knight-Celotex Fiberboard shut down their Marrero Plant in early 2007 due to impacts from hurricane Katrina and other economic factors. Therefore, cane-based Celotex(trademark) fiberboard is no longer available for use in the manufacture of new shipping packages requiring the material as a component. Current consolidation plans for the DOE Complex require the procurement of several thousand new Model 9975 shipping packages requiring cane-based Celotex(trademark) fiberboard. Therefore, an alternative to cane-based Celotex(trademark) fiberboard is needed. Knight-Celotex currently manufactures Celotex(trademark) fiberboard from other cellulosic materials, such as hardwood and softwood. A review of the relevant literature has shown that softwood-based Celotex(trademark) meets all parameters important to the Model 9975 shipping package

  3. Celotex Structural Properties Tests

    Smith, A.C.

    2001-01-01

    In the course of regulatory review of the 9975 packaging, the question of the effects environmental conditions on performance of the packaging was raised. The results of previous tests of the Celotex material, used for impact absorption and thermal insulation, indicated that the effect of temperature variation was small. Accordingly, performance under ambient conditions was judged to be representative of performance under temperature extremes. To extend the database to include other effects, and in response to the questions, a series of materials tests were performed on the Celotex brand cellulose fiberboard material

  4. Corrosion of beryllium exposed to celotex and water

    Hill, M.A.; Butt, D.P.; Lillard, R.S.

    1997-01-01

    Celotex is a commercial rigid cellulose fiberboard product primarily used in the building construction industry. Currently celotex is being used as a packing material in AL-R8 containers. Ion chromatography of celotex packing material at Lawrence Livermore National Laboratory (LLNL) has indicated that this material contains aggressive anions, including chloride, which may accelerate corrosion. It is well known that beryllium is susceptible to pitting corrosion when exposed to chloride containing environments. Levy noted pitting in beryllium at the open circuit potential when exposed to 0.1 M NaCl solution. This investigation attempts to evaluate the potential risk of accelerated beryllium corrosion from celotex and water which may occur naturally when celotex dust comes into contact with moisture from the atmosphere

  5. Productos «Celotex» para acondicionamientos Acústicos

    Editorial, Equipo

    1958-02-01

    Full Text Available Not availableBajo la denominación general «Celotex», que es un nombre registrado, la Casa Americana The Celotex Corporation, cuyo domicilio social es 120 South, La Salle Street, Chicago J. lllinois, fabrica diversos materiales para fines de acondicionamiento acústico elaborados, según los tipos de que se trate, con fibra de caña de azúcar, lanas minerales, acero, amianto, etc., perforados o no y de acuerdo con el efecto estético y acústico que se desee obtener.

  6. Numerical modelling of softwood time-dependent behaviour based on microstructure

    Engelund, Emil Tang

    2010-01-01

    The time-dependent mechanical behaviour of softwood such as creep or relaxation can be predicted, from knowledge of the microstructural arrangement of the cell wall, by applying deformation kinetics. This has been done several times before; however, often without considering the constraints defined...... by the basic physical mechanism behind the time-dependent behaviour. The mechanism causing time-dependency is thought to be sliding of the microfibrils past each other as a result breaking and re-bonding of hydrogen bonds. This can be incorporated in a numerical model by only allowing time-dependency in shear...

  7. Ethanol from softwood. Process development based on steam pretreatment and SSF

    Stenberg, Kerstin

    1999-05-01

    Fuel ethanol can be produced from lignocellulosics by the enzymatic hydrolysis process, which consists of a pretreatment step prior to hydrolysis, followed by fermentation and finally refining. This thesis deals with the development of the enzymatic process using softwood as raw material. The focus has not only been on how to obtain high yields, but also on how to solve problems, which can arise in an industrial process, such as inhibition and contamination. The pretreatment step was evaluated using steam-pretreatment and impregnation with an acid catalyst, either SO{sub 2} or H{sub 2}SO{sub 4}. Both impregnation methods resulted in approximately the same yield, 65% of the theoretical of fermentable sugars, i.e. glucose and mannose, after enzymatic hydrolysis. However, impregnation with SO{sub 2}, resulted in higher ethanol productivity and yield in the fermentation. Simultaneous saccharification and fermentation (SSF) was investigated using various substrate and cellulase concentrations. An overall ethanol yield of 70% of the theoretical was obtained using the whole slurry from the pretreatment step at an insoluble dry weight content of 5%, which was shown to be optimal. SSF resulted in both higher productivity and higher ethanol yield than in separate hydrolysis and fermentation, but proved to be more sensitive to infection by lactic aid bacteria. More complex process integration, in the form of recirculation of process streams, which is desirable in an industrial process, was investigated using bench-scale equipment. A reduction in the fresh-water demand of 50%, from 3 kg/kg dry raw material to 1.5 kg/kg dry raw material, was found to be possible without any negative effects on either hydrolysis or fermentation. A techno-economic evaluation of different process configurations in a process applying SSF was also performed. It was found that the ethanol production cost could be reduced by 20% by internal energy integration and by another 15% by recirculation to the

  8. INVESTIGATION OF THE PRESENCE OF DRUGSTORE BEETLES WITHIN CELOTEX ASSEMBLIES IN RADIOACTIVE MATERIAL PACKAGINGS

    Loftin, B; Glenn Abramczyk, G

    2008-06-04

    During normal operations at the Department of Energy's Hanford Site in Hanford, WA, drugstore beetles, (Stegobium paniceum (L.) Coleoptera: Anobiidae), were found within the fiberboard subassemblies of two 9975 Shipping Packages. Initial indications were that the beetles were feeding on the Celotex{trademark} assemblies within the package. Celotex{trademark} fiberboard is used in numerous radioactive material packages serving as both a thermal insulator and an impact absorber for both normal conditions of transport and hypothetical accident conditions. The Department of Energy's Packaging Certification Program (EM-63) directed a thorough investigation to determine if the drugstore beetles were causing damage that would be detrimental to the safety performance of the Celotex{trademark}. The Savannah River National Laboratory is conducting the investigation with entomological expertise provided by Clemson University. The two empty 9975 shipping packages were transferred to the Savannah River National Laboratory in the fall of 2007. This paper will provide details and results of the ongoing investigation.

  9. Process design and economics of on-site cellulase production on various carbon sources in a softwood-based ethanol plant.

    Barta, Zsolt; Kovacs, Krisztina; Reczey, Kati; Zacchi, Guido

    2010-06-28

    On-site cellulase enzyme fermentation in a softwood-to-ethanol process, based on SO(2)-catalysed steam pretreatment followed by simultaneous saccharification and fermentation, was investigated from a techno-economic aspect using Aspen Plus© and Aspen Icarus Process Evaluator© softwares. The effect of varying the carbon source of enzyme fermentation, at constant protein and mycelium yields, was monitored through the whole process. Enzyme production step decreased the overall ethanol yield (270 L/dry tonne of raw material in the case of purchased enzymes) by 5-16 L/tonne. Capital cost was found to be the main cost contributor to enzyme fermentation, constituting to 60-78% of the enzyme production cost, which was in the range of 0.42-0.53 SEK/L ethanol. The lowest minimum ethanol selling prices (4.71 and 4.82 SEK/L) were obtained in those scenarios, where pretreated liquid fraction supplemented with molasses was used as carbon source. In some scenarios, on-site enzyme fermentation was found to be a feasible alternative.

  10. Organosolv Fractionation of Softwood Biomass for Biofuel and Biorefinery Applications

    Christos Nitsos

    2017-12-01

    Full Text Available Softwoods represent a significant fraction of the available lignocellulosic biomass for conversion into a variety of bio-based products. Its inherent recalcitrance, however, makes its successful utilization an ongoing challenge. In the current work the research efforts for the fractionation and utilization of softwood biomass with the organosolv process are reviewed. A short introduction into the specific challenges of softwood utilization, the development of the biorefinery concept, as well as the initial efforts for the development of organosolv as a pulping method is also provided for better understanding of the related research framework. The effect of organosolv pretreatment at various conditions, in the fractionation efficiency of wood components, enzymatic hydrolysis and bioethanol production yields is then discussed. Specific attention is given in the effect of the pretreated biomass properties such as residual lignin on enzymatic hydrolysis. Finally, the valorization of organosolv lignin via the production of biofuels, chemicals, and materials is also described.

  11. Geometric model for softwood transverse thermal conductivity. Part I

    Hong-mei Gu; Audrey Zink-Sharp

    2005-01-01

    Thermal conductivity is a very important parameter in determining heat transfer rate and is required for developing of drying models and in industrial operations such as adhesive cure rate. Geometric models for predicting softwood thermal conductivity in the radial and tangential directions were generated in this study based on obervation and measurements of wood...

  12. Structural Change in Southern Softwood Stumpage Markets

    Douglas R. Carter

    1998-01-01

    The potential for structural change in southern stumpage market models has impacts on not only our basic understanding of those markets, but also on harvest, inventory and price projections, and related policy. In this paper, we test for structural change in both sawtimber and pulpwood softwood stumpage markets in the U.S. South over the period 1950-1994. Test...

  13. Modelling time-dependent mechanical behaviour of softwood using deformation kinetics

    Engelund, Emil Tang; Svensson, Staffan

    2010-01-01

    The time-dependent mechanical behaviour (TDMB) of softwood is relevant, e.g., when wood is used as building material where the mechanical properties must be predicted for decades ahead. The established mathematical models should be able to predict the time-dependent behaviour. However, these models...... are not always based on the actual physical processes causing time-dependent behaviour and the physical interpretation of their input parameters is difficult. The present study describes the TDMB of a softwood tissue and its individual tracheids. A model is constructed with a local coordinate system that follows...... macroscopic viscoelasticity, i.e., the time-dependent processes are to a significant degree reversible....

  14. Relative efficiency of sawmill types operating in Uganda's softwood ...

    The overall aim of this study was to determine the appropriate saw milling ... the swivel and locally-maoufactu red sawmills operating in softwood plantations to improve their feed A ... technologies, poor maintenance of sawmill machinery, poor ... Production of timber from the softwood plantations ..... by Productive Capacity.

  15. Regional softwood sawmill processing variables as influenced by productive capacity

    P. H. Steele; F. G. Wagner; K. E. Skog

    The relationship between annual softwood sawmill production and lumber processing variables was examined using data from Sawmill Improvement Program (SIP) studies of 650 softwood mills. The variables were lumber recovery factor (LRF); headrig and resaw kerf width; total sawing variation, rough green size, and oversizing-undersizing for 4/4 and 8/4 lumber; planer...

  16. Political pressure: An examination of U S Senators actions in restricting Canadian softwood lumber imports

    Joseph Godwin; Daowei Zhang

    2012-01-01

    Over the past 30 years the U.S.–Canadian softwood lumber trade dispute has resulted in three managed trade agreements that have not been voted on in the U.S. Congress. Nevertheless, U.S. Senators have played an important role in shaping the political environment that has nurtured these agreements. In this paper we construct a lumber influence index based on 14 known...

  17. Two-dimensional finite element heat transfer model of softwood. Part III, Effect of moisture content on thermal conductivity

    Hongmei Gu; John F. Hunt

    2007-01-01

    The anisotropy of wood creates a complex problem for solving heat and mass transfer problems that require analyses be based on fundamental material properties of the wood structure. Most heat transfer models for softwood use average thermal properties across either the radial or tangential direction and do not differentiate the effects of cellular alignment or...

  18. Emissions from burning of softwood pellets

    Olsson, Maria; Kjaellstrand, Jennica

    2004-01-01

    Softwood pellets from three different Swedish manufacturers were burnt in laboratory scale to determine compounds emitted. The emissions were sampled on Tenax cartridges and assessed by gas chromatography and mass spectrometry. No large differences in the emissions from pellets from different manufacturers were observed. The major primary semi-volatile compounds released during flaming burning were 2-methoxyphenols from lignin. The methoxyphenols are of interest due to their antioxidant effect, which may counteract health hazards of aromatic hydrocarbons. Glowing combustion released the carcinogenic benzene as the predominant aromatic compound. However, the benzene emissions were lower than from flaming burning. To relate the results from the laboratory burnings to emissions from pellet burners and pellet stoves, chimney emissions were determined for different burning equipments. The pellet burner emitted benzene as the major aromatic compound, whereas the stove and boiler emitted phenolic antioxidants together with benzene. As the demand for pellets increases, different biomass wastes will be considered as raw materials. Ecological aspects and pollution hazards indicate that wood pellets should be used primarily for residential heating, whereas controlled large-scale combustion should be preferred for pellets made of most other types of biomass waste. (Author)

  19. Softwood Lumber – Some Lessons from the Last Softwood (Lumber IV Dispute

    Elaine Feldman

    2017-10-01

    Full Text Available The checkered history of softwood lumber disputes between Canada and its southern neighbour stretches back to the 1800s, with five of them occurring since 1982. Two years ago, the settlement obtained in 2006 expired and most Canadian softwood lumber exporters now face a combined countervailing and anti-dumping duty rate from the Americans of around 27 per cent. On the surface, the last dispute, known as Lumber IV, appeared to be a squabble over subsidization and dumping of Canadian softwood lumber exports. However, closer scrutiny revealed that this dispute was really about commercial interests triumphing over policy – the U.S. lumber industry wanted to ensure it kept a certain share of the market at the highest price possible. Complicating attempts to resolve any dispute is the fact that Canada is not a single entity in the lumber business; interest in quota or duties varies across regions as do the countervailing (CVD and anti-dumping (AD rates that the U.S. imposes on particular Canadian producers. These variations thus create almost a divide-and-conquer situation in which one group of producers feels others are getting an advantage. The Canadian industry instead should be standing together as much as possible, creating a united front in any dispute with the U.S. Drafting new policy and resorting to litigation to settle Lumber IV failed because the potential settlement got bogged down by the drawbacks of both of those routes. Policy failed because it quickly became clear that the U.S. was going to act with impunity to determine whether there was a subsidy, regardless of what the trade rules permitted. And litigation created an endless loop in which contradictory rulings were handed back and forth between NAFTA panels and the U.S. International Trade Commission, stalling any resolution. Lumber IV also taught the Canadians that taking their complaints to both NAFTA and the World Trade Organization, which does not order a refunding of wrongly

  20. On-site energy consumption at softwood sawmills in Montana

    Dan Loeffler; Nathaniel Anderson; Todd A. Morgan; Colin B. Sorenson

    2016-01-01

    Total on-site energy requirements for wood product manufacturing are generally not well understood or publicly available, particularly at subregional scales, such as the state level. This article uses a mail survey of softwood sawmills in Montana to develop a profile of all on-site energy consumption. Energy use is delineated by fuel type on a production basis...

  1. Softwood sawlog secondary transport travel speed prediction for the ...

    The objective of this study was to develop a predictive model for travel speed of softwood sawlog timber transport (STT) vehicles over a range of forest and provincial roads of varying condition for the South African forestry industry. Data was accumulated from both the Eastern Cape/KwaZulu-Natal and Mpumalanga forest ...

  2. Clonal multiplication of guava through softwood cuttings under mist conditions

    Kareem, A.; Jaskkani, M.J.; Fatima, B.; Sadia, B.

    2012-01-01

    Guava (psidium guajava l.) is a luscious and important tropical fruit crop. the objective of the study was to develop vegetative propagation system to avoid clonal degradation in guava fruit plants. softwood cuttings from five year old gola accession were prepared from the shoot tops of current season growth, measuring 12 cm in length and carrying 2 to 4 nodes. iba and naa (0, 2000, 4000, 6000, 8000 ppm) were selected to treat cuttings for root induction. cuttings were planted under mist conditions by maintaining temperature at 25 degree c and 85% relative humidity for 25 days. maximum survival percentage (92.17%) of plants at transplanting was noted with 4000 ppm concentration followed by 2000 ppm (85.50%). In general iba 4000 ppm concentration performed better as compared to naa for all parameters studied. This study revealed the potential of clonal propagation of guava through softwood cuttings treated with auxins. (author)

  3. Cancer incidence among workers exposed to softwood dust in Lithuania.

    Smailyte, Giedre

    2012-06-01

    The aim of this study was to assess cancer incidence in a cohort of woodworkers exposed to softwood dust in a Lithuanian wooden joinery products factory. The study population consisted of 1518 workers (1080 men and 438 women) employed in the factory for at least 1 year between 1947 and 1996 and living in Lithuania on 1 January 1978, when the follow-up for cancer incidence began. The follow-up period for cancer was 1978-2007. Cancer risk was assessed by standardised incidence ratios (SIR) with reference to the national population. Overall cancer incidence was not increased among woodworkers. However, the number of mouth and pharynx cancer cases among male woodworkers was significantly increased compared with expected numbers (SIR 2.19, 95% CI 1.17 to 3.74). A higher risk was found for cancer of the buccal cavity than for pharyngeal cancer (SIRs 2.83 and 1.45, respectively). The SIR for larynx cancer was also elevated (SIR 1.39, 95% CI 0.64 to 2.64) among men, while the number of lung cancer cases was higher than expected only among women (SIR 2.07, 95% CI 00.57 to 5.31). This results of this study support the hypothesis that exposure to softwood dust may increase the risk of oral and pharyngeal cancer. No support was found for an increased risk of other respiratory cancers among workers exposed to softwood dust.

  4. Sixth Status Report: Testing of Aged Softwood Fiberboard Material for the 9975 Shipping Package

    Daugherty, W. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-03-31

    Samples have been prepared from several 9975 lower fiberboard subassemblies fabricated from softwood fiberboard. Physical, mechanical and thermal properties have been measured following varying periods of conditioning in each of several environments. These tests have been conducted in the same manner as previous testing on cane fiberboard samples. Overall, similar aging trends are observed for softwood and cane fiberboard samples, with a few differences. Some softwood fiberboard properties tend to degrade faster in some environments, while some cane fiberboard properties degrade faster in the two most aggressive environments. As a result, it is premature to assume both materials will age at the same rates, and the preliminary aging models developed for cane fiberboard might not apply to softwood fiberboard. However, it is expected that both cane and softwood fiberboard assemblies will perform satisfactorily in conforming packages stored in a typical KAC storage environment for up to 15 years. Samples from an additional 3 softwood fiberboard assemblies have begun aging during the past year to provide information on the variability of softwood fiberboard behavior. Aging and testing of softwood fiberboard will continue and additional data will be collected to support development of an aging model specific to softwood fiberboard.

  5. Economic analysis of the Canada-United States softwood lumber dispute : playing the quota game

    Kooten, van G.C.

    2002-01-01

    The Canada-U.S. Softwood Lumber Agreement (SLA) was the latest measure to restrict Canadian exports of softwood lumber to the United States. Rather than a countervail duty or export tax, SLA employed a quota that provides a large windfall (quota) rent to Canadian lumber producers in addition to

  6. 19 CFR 12.140 - Entry of softwood lumber products from Canada.

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Entry of softwood lumber products from Canada. 12... products from Canada. The requirements set forth in this section are applicable for as long as the Softwood... and Canada, remains in effect. (a) Definitions. The following definitions apply for purposes of this...

  7. Evaluation of wet oxidation pretreatment for enzymatic hydrolysis of softwood

    Palonen, H.; Thomsen, A.B.; Tenkanen, M.

    2004-01-01

    The wet oxidation pretreatment (water, oxygen, elevated temperature, and pressure) of softwood (Picea abies) was investigated for enhancing enzymatic hydrolysis. The pretreatment was preliminarily optimized. Six different combinations of reaction time, temperature, and pH were applied......, and the compositions of solid and liquid fractions were analyzed. The solid fraction after wet oxidation contained 58-64% cellulose, 2-16% hemicellulose, and 24-30% lignin. The pretreatment series gave information about the roles of lignin and hemicellulose in the enzymatic hydrolysis. The temperature...

  8. Delignification of softwood kraft pulp by chlorine dioxide in a laboratory bleaching liquor displacement reactor

    Hamzeh, Y.; Izadyar, S.

    2008-01-01

    The chlorine dioxide delignification efficiency of softwood kraft pulp in the laboratory liquor displacement reactor (fixed bed reactor) was investigated and compared with conventional batch reactor. The comparison of two reactors was made based on the effective efficiency and overall efficiency of chlorine dioxide. Effective efficiency corresponds to the oxidizing capacity of chlorine dioxide which consumed by organic materials. Comparison of two reactors based on the effective efficiency showed that the selectivity of delignification significantly enhanced in the displacement reactor in which the primary reaction products are eliminated from reaction zone by displacing flow. On the other hand, the formation of high amounts of chlorate in the reaction zone of displacement reactor reduces the overall efficiency of chlorine dioxide delignification stage. Thus, in spite of significant decrease in useless secondary reactions, this type of reactor would not be cost effective in the industrial scale

  9. EFFECT OF STEAMING ON THE COLOUR CHANGE OF SOFTWOODS

    Laszlo Tolvaj,

    2012-05-01

    Full Text Available The heat treatment of softwood (i.e. spruce, pine, fir, and larch may result in significant colour changes. During this study Scots pine and spruce samples were steamed and analysed for their altered hue and lightness. Treatments included: 0 to 22 days of steaming time at a temperature range of 70 to 100°C. The outcome included a variety of colours between the initial hues and brownish tint. These new colours are similar to that of aged furniture and indoor wooden structures. Consequently, properly steamed softwood may be used to repair historical artefacts and relic furniture. Besides restoration, steamed stocks are excellent sources for manufacture of periodical furniture, where the aged appearance has aesthetical value. Results however, indicated that steaming at a temperature above 90 ˚C has a bleaching effect, i.e. the coloured chemical components formed by moderate steaming may be removed. Furthermore, we observed a linear correlation between lightness and colour hue at all steaming times and temperatures.

  10. Prediction of Five Softwood Paper Properties from its Density using Support Vector Machine Regression Techniques

    Esperanza García-Gonzalo

    2016-01-01

    Full Text Available Predicting paper properties based on a limited number of measured variables can be an important tool for the industry. Mathematical models were developed to predict mechanical and optical properties from the corresponding paper density for some softwood papers using support vector machine regression with the Radial Basis Function Kernel. A dataset of different properties of paper handsheets produced from pulps of pine (Pinus pinaster and P. sylvestris and cypress species (Cupressus lusitanica, C. sempervirens, and C. arizonica beaten at 1000, 4000, and 7000 revolutions was used. The results show that it is possible to obtain good models (with high coefficient of determination with two variables: the numerical variable density and the categorical variable species.

  11. Study of root tensile strength of softwood and hardwood tree species: Implications for slope stability

    Esmaiili, Marzieh; Abdi, Ehsan; Jafary, Mohammad; Majnounian, Baris

    2017-04-01

    Landslides are known as one of the major natural hazards and often incurring economics and human life losses. The role of tree roots in slope stability is very important, especially when human lives and infrastructure are at risk. The anchorage of roots and improvement of slope stability mainly depend on specific properties of root network systems, such as tensile strength. These properties of the roots which govern the degree of reinforcement are different among tree species. Although, many studies have been conducted about plant biotechnical properties of species, yet there is lack of knowledge on comparing root systems of softwood and hardwood tree species for similar site conditions. Therefore this study was conducted to assess the tensile strength of the root system of Picea abies (softwood species) and Fraxinus excelsior (hardwood species) planted on two forested hillslopes. To this aim, single root specimens were sampled for each species and their tensile strength were then measured in laboratory using a computer controlled Instron Universal Testing Machine. According to the results root tensile strength tends to decrease with diameter according to a power law for both species. Based on analysis of covariance (ANCOVA), a significant difference has been observed in the tensile strength between the two studied species. Also the results showed that the value of mean root tensile strength for Picea abies (19.31 ± 2.64 MPa) was much more than that of Fraxinus excelsior (16.98 ± 1.01 MPa) within all root diameter classes. The data presented in this study may expand the knowledge of biotechnical properties of Picea abies and Fraxinus excelsior, as biomaterial for soil bioengineering.

  12. Composting of organically amended/treated hardwood and softwood sawdust

    Takyi-Lartey, Rita

    2015-07-01

    Sawdust is a major waste produced by the wood industry. Adding value to sawdust through composting is one of the surest means by which environmental pollution could be minimized. About 500 kg of softwood and hardwood sawdust were separately mixed with mucuna leaves and kitchen waste in the ratio of 3:1:1 on weight basis and heaped using effluent from abattoir to develop composts. Objectives of the study were to monitor changes in the physico-chemical properties, NH4"+ ‒ N, NO3"‒ ‒ N, C:N ratio, minerals N, K, P, microbial load and toxic elements in the composts during a 12 week period. Germination test was also done to evaluate the stability and maturity of the composts developed. Degradation of softwood sawdust compost (SSC) was better in the mesophilic phase while that of hardwood sawdust compost (HSC) occurred in the thermophilic phase. Thus, significantly higher amount of the organic material in SSC was decomposed during the period as compared to HSC. Also, greater percentage of the nitrogen in the initial material of SSC was converted into plant-available inorganic nitrogen (NH4"+ and NO3"‒) than was achieved in HSC. Hence, most of the mineral nitrogen in HSC that was converted was lost, probably in the thermophilic phase. On the contrary, the amount of organic nitrogen contained in the finished composts of both SSC and HSC were adequately good for application to the soil. Additionally, concentrations of pathogenic microorganisms in SSC and HSC products were within acceptable limits in terms of toxicity on growing plants. The softwood sawdust compost was relatively more stable as compared to HSC under the experimental conditions. Concentrations of heavy metals in both SSC and HSC were also within acceptable limits that would cause no toxicity to plants. Also, moisture contents in both SSC and HSC were within the good range (40 - 60%) required for a good compost. Thus both SSC and HSC produced were of good quality. Further research targeting specific

  13. Gamma ray induced chromophore modification of softwood thermomechanical pulp

    Robert, S.; Daneault, C.; Viel, C.; Lepine, F.

    1992-01-01

    This study focuses on bleaching a softwood (black spruce, balsam fur) thermomechanical pulp with gamma rays. Gamma rays are known for their enormous penetrating power, along with their ionizing properties. They can generate highly energetic radicals capable of oxidizing lignin chromophores. The authors studied the influence of isopropyl alcohol, sodium borohydride, oxygen, hydrogen peroxide, nitrogen dioxide and water along with gamma ray irradiation of the pulps. The authors measured the optimal dose and dose rate, along with the influence of the radical scavengers like oxygen on the bleaching effect of gamma irradiated pulps. They observe various degrees of bleaching of these pulps. Evidence relates this bleaching to the generation of perhydroxyl anions upon irradiation of water. Also, they were able to pinpoint the influence of the dose rate on the rate of formation and disappearance of these perhydroxyl anions and their influence on bleaching kinetics. Stability toward photoyellowing, and photoyellowing's kinetic of papers from these pulps was also studied

  14. Pyrolysis of Softwood Carbohydrates in a Fluidized Bed Reactor

    Dmitry Yu. Murzin

    2008-09-01

    Full Text Available In the present work pyrolysis of pure pine wood and softwood carbohydrates, namely cellulose and galactoglucomannan (the major hemicellulose in coniferous wood, was conducted in a batch mode operated fluidized bed reactor. Temperature ramping (5°C/min was applied to the heating until a reactor temperature of 460 °C was reached. Thereafter the temperature was kept until the release of non-condensable gases stopped. The different raw materials gave significantly different bio-oils. Levoglucosan was the dominant product in the cellulose pyrolysis oil. Acetic acid was found in the highest concentrations in both the galactoglucomannan and in the pine wood pyrolysis oils. Acetic acid is most likely formed by removal of O-acetyl groups from mannose units present in GGM structure.

  15. Pyrolysis of softwood carbohydrates in a fluidized bed reactor.

    Aho, Atte; Kumar, Narendra; Eränen, Kari; Holmbom, Bjarne; Hupa, Mikko; Salmi, Tapio; Murzin, Dmitry Yu

    2008-09-01

    In the present work pyrolysis of pure pine wood and softwood carbohydrates, namely cellulose and galactoglucomannan (the major hemicellulose in coniferous wood), was conducted in a batch mode operated fluidized bed reactor. Temperature ramping (5 degrees C/min) was applied to the heating until a reactor temperature of 460 degrees C was reached. Thereafter the temperature was kept until the release of non-condensable gases stopped. The different raw materials gave significantly different bio-oils. Levoglucosan was the dominant product in the cellulose pyrolysis oil. Acetic acid was found in the highest concentrations in both the galactoglucomannan and in the pine wood pyrolysis oils. Acetic acid is most likely formed by removal of O-acetyl groups from mannose units present in GGM structure.

  16. Humidity Data for 9975 Shipping Packages with Softwood Fiberboard

    Daugherty, W. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-01-12

    The 9975 surveillance program is developing a technical basis to support extending the storage period of 9975 packages in K-Area Complex beyond the currently approved 15 years. A key element of this effort is developing a better understanding of degradation of the fiberboard assembly under storage conditions. This degradation is influenced greatly by the moisture content of the fiberboard, which is not well characterized on an individual package basis. Direct measurements of humidity and fiberboard moisture content have been made on two test packages with softwood fiberboard and varying internal heat levels from 0 up to 19W. Comparable measurements with cane fiberboard have been reported previously. With an internal heat load, a temperature gradient in the fiberboard assembly leads to varying relative humidity in the air around the fiberboard. However, the absolute humidity tends to remain approximately constant throughout the package, especially at lower heat loads.

  17. 76 FR 22751 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order...

    2011-04-22

    ... 23, 2011. FOR FURTHER INFORMATION CONTACT: Maureen T. Pello, Marketing Specialist, Research and... procedure, Advertising, Consumer information, Marketing agreements, Softwood lumber, Promotion, Reporting... Vol. 76 Friday, No. 78 April 22, 2011 Part II Department of Agriculture Agricultural Marketing...

  18. 75 FR 61025 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order...

    2010-10-01

    ... Information Order; Referendum Procedures AGENCY: Agricultural Marketing Service, USDA. ACTION: Proposed rule..., Washington, DC 20503. FOR FURTHER INFORMATION CONTACT: Maureen T. Pello, Marketing Specialist, Research and... procedure, Advertising, Consumer information, Marketing agreements, Softwood Lumber, Promotion, Reporting...

  19. Producing a True Lignin Depolymerase for Biobleaching Softwood Kraft Pulp

    Simo Sarkanen

    2002-02-04

    This project constituted an intensive effort devoted to producing, from the white-rot fungus Tramets Cingulata, a lignin degrading enzyme (lignin depolymerase) that is directly able to biobleach or delignify softwood kraft pulp brownstock. To this end, the solutions in which T. cingulata was grown contained dissolved kraft lignin which fulfilled two functions; it behaved as a lignin deploymerase substrate and it also appeared to act as an inducer of enzyme expression. However, the lignin depolymerase isoenzymes (and other extracellular T. cingulata enzymes) interacted very strongly with both the kraft lignin components and the fungal hypae, so the isolating these proteins from the culture solutions proved to be unexpectedly difficult. Even after extensive experimentation with a variety of protein purification techniques, only one approach appeared to be capable of purifying lignin depolymerases to homogeneity. Unfortunately the procedure was extremely laborious; it involved the iso electric focusing of concentrated buffer-exchanged culture solutions followed by electro-elution of the desired protein bands from the appropriate polyacrylamide gel segments

  20. Dilute alkali pretreatment of softwood pine: A biorefinery approach.

    Safari, Ali; Karimi, Keikhosro; Shafiei, Marzieh

    2017-06-01

    Dilute alkali pretreatment was performed on softwood pine to maximize ethanol and biogas production via a biorefinery approach. Alkali pretreatments were performed with 0-2% w/v NaOH at 100-180°C for 1-5h. The liquid fraction of the pretreated substrates was subjected to anaerobic digestion. The solid fraction of the pretreatment was used for separate enzymatic hydrolysis and fermentation. High ethanol yields of 76.9‒78.0% were achieved by pretreatment with 2% (w/v) NaOH at 180°C. The highest biogas yield of 244mL/g volatile solid (at 25°C, 1bar) was achieved by the pretreatment with 1% (w/v) NaOH at 180°C. The highest gasoline equivalent (sum of ethanol and methane) of 197L per ton of pinewood and the lowest ethanol manufacturing cost of 0.75€/L was obtained after pretreatment with 1% NaOH at 180°C for 5h. The manufacturing cost of ethanol from untreated wood was 4.12€/L. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. 75 FR 16748 - Final Voluntary Product Standard; DOC PS 20-10 “American Softwood Lumber Standard”

    2010-04-02

    ...-0146-02] Final Voluntary Product Standard; DOC PS 20-10 ``American Softwood Lumber Standard'' AGENCY... of Standards and Technology (NIST) announces voluntary product standard DOC PS 20-10 ``American Softwood Lumber Standard'' which will supersede DOC PS 20-05. The Standard establishes standard sizes and...

  2. Microwave irradiation of lignocellulosic materials, 4: Enhancement of enzymatic susceptibility of microwave-irradiated softwoods

    Azuma, J.; Higashino, J.; Isaka, M.; Koshijima, T.

    1985-01-01

    Effect of microwave irradiation on the enzymatic susceptibility of various softwoods was investigated. The pH values of the reaction liquor dropped with increasing temperature to 2.9-3.3 at 230°C, consistent with increase in acidity (0.5-0.85 meq at 230-239° C). Above approximately 180°C, hemicellulose underwent acid-mediated autohydrolysis and became water-soluble yielding a mixture of oligosaccharides and monosaccharides. The composition of water-soluble portion was similar for all wood species tested. The maximum extents of saccharification below 240°C ranged between 36-62% for softwoods, while those for hardwoods were between 88-93%. The present investigation confirmed that microwave pretreatment enhanced the enzymatic susceptibility of various softwoods. However, further attempt should be needed to give higher values equal to those for hardwoods. (author)

  3. Bioethanol production: Pretreatment and enzymatic hydrolysis of softwood

    Tengborg, Charlotte

    2000-05-01

    The enzymatic hydrolysis process can be used to produce bioethanol from softwood, which are the dominating raw material in the Northern hemisphere. This thesis deals with the development of the process focusing on the pretreatment and the enzymatic hydrolysis stages. The influence of pretreatment conditions on sugar yield, and the effect of inhibitors on the ethanol yield, were investigated for spruce and pine. The maximum yields of hemicellulose sugars and glucose were obtained under different pretreatment conditions. This indicates that two-stage pretreatment may be preferable. The added catalysts, H{sub 2}SO{sub 4} and SO{sub 2}, resulted in similar total sugar yields about 40 g/100 g dry raw material. However, the fermentability of SO{sub 2}-impregnated material was better. This pretreatment resulted in the formation of inhibitors to the subsequent process steps, e.g. sugar and lignin degradation products. The glucose yield in the enzymatic hydrolysis stage was affected by various parameters such as enzyme loading, temperature, pH, residence time, substrate concentration, and agitation. To decrease the amount of fresh water used and thereby waste water produced, the sugar-rich prehydrolysate from the pretreatment step was included in the enzymatic hydrolysis of the solid fraction, resulting in a reduction in the cellulose conversion of up to 36%. Different prehydrolysate detoxification methods, such as treatment with Ca(OH){sub 2}, laccase, and fermentation using yeast, were investigated. The latter was shown to be very efficient. The amount of fresh water used can be further reduced by recycling various process streams. This was simulated experimentally in a bench-scale process. A reduction in fresh water demand of 50% was obtained without any further negative effects on either hydrolysis or fermentation.

  4. Revealing the Molecular Structural Transformation of Hardwood and Softwood in Dilute Acid Flowthrough Pretreatment

    Zhang, Libing; Pu, Yunqiao; Cort, John R.; Ragauskas, Arthur J.; Yang, Bin

    2016-12-05

    To better understand the intrinsic recalcitrance of lignocellulosic biomass, the main hurdle to its efficient deconstruction, the effects of dilute acid flowthrough pretreatment on the dissolution chemistry of hemicellulose, cellulose, and lignin for both hardwood (e.g. poplar wood) and softwood (e.g. lodgepole pine wood) were investigated at temperatures of 200 °C to 270 °C and a flow rate of 25 mL/minute with 0.05% (w/w) H2SO4. Results suggested that the softwood cellulose was more readily to be degraded into monomeric sugars than that of hardwood under same pretreatment conditions. However, while the hardwood lignin was completely removed into hydrolysate, ~30% of the softwood lignin remained as solid residues under identical conditions, which was plausibly caused by vigorous C5-active recondensation reactions (C-C5). Unique molecular structural features that pronounced the specific recalcitrance of hardwood and softwood to dilute acid pretreatment were identified for the first time in this study, providing important insights to establish the effective biomass pretreatment.

  5. 76 FR 22757 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order

    2011-04-22

    ... concrete dominate larger residential and nonresidential projects. Brick, concrete, and vinyl are often used... products like cement and vinyl has also helped to reduce demand for softwood lumber. \\12\\ Price data was... votes would have to be confirmed in writing and recorded in Board minutes. The proposed Order would...

  6. Environmental impact of manufacturing softwood lumber in northeastern and north central United States

    Richard D. Bergman; Scott A. Bowe

    2010-01-01

    Finding the environmental impact of building materials is becoming increasingly more important because of public environmental awareness. Accurate and precise life-cycle inventory data on wood products are needed to meet this demand. This study examined softwood lumber manufacturing in the northeastern and north central US using life-cycle inventory methods. Material...

  7. Effects of humidity level and IBA dose application on the softwood ...

    IBA) doses on softwood top cuttings of two black mulberry (Types 1 and 2) and one white mulberry (Type 3) types were studied. Cuttings were taken from early June (14 Haziran) and applied to the different IBA doses (0, 1000, 2000, 3000 and ...

  8. On-site energy consumption and selected emissions at softwood sawmills in the southwestern United States

    Dan Loeffler; Nathaniel Anderson; Todd A. Morgan; Colin B. Sorenson

    2016-01-01

    Presently there is a lack of information describing US southwestern energy consumption and emissions generated from the sawmilling industry. This article uses a mail survey of softwood sawmills in the states of Arizona, Colorado, and New Mexico to develop a profile of on-site energy consumption and selected emissions for the industry. Energy consumption is...

  9. Preparation and Characterization of Cellulose Nanofibers from Two Commercial Hardwood and Softwood Pulps

    Stelte, Wolfgang; Sanadi, Anand R.

    2009-01-01

    The aim of this work was to study the mechanical fibrillation process for the preparation of cellulose nanofibers from two commercial hard- and softwood cellulose pulps. The process consisted of initial refining and subsequent high-pressure homogenization. The progress in fibrillation was studied...

  10. Two-dimensional finite element heat transfer model of softwood. Part II, Macrostructural effects

    Hongmei Gu; John F. Hunt

    2006-01-01

    A two-dimensional finite element model was used to study the effects of structural features on transient heat transfer in softwood lumber with various orientations. Transient core temperature was modeled for lumber samples “cut” from various locations within a simulated log. The effects of ring orientation, earlywood to latewood (E/L) ratio, and ring density were...

  11. Preferences of group-housed female mice regarding structure of softwood bedding.

    Kirchner, J; Hackbarth, H; Stelzer, H D; Tsai, P-P

    2012-04-01

    Bedding influences various parameters in the housing of laboratory mice, such as health, physiology and behaviour (often considered as being integral parts of welfare). Notwithstanding existent studies about bedding preferences of individually tested mice, data about group-housed mice are still lacking. The aim of this study was to find out the structure preference for softwood bedding of group-housed mice. One hundred and eight 8-week-old female mice (C57BL6/JOlaHsd and BALB/cOlaHsd) were housed in groups of three and were given one-week free access to two different bedding structures at a time. In three test combinations, softwood shaving bedding was tested versus softwood chip bedding products of three different particle sizes (fine/medium/coarse-grained). The preference test was performed in a DoubleCage system composed of two Makrolon type IIL cages, connected by a perspex tunnel. This validated system was able to detect the crossings of each individual animal with correct crossing time and direction. On the basis of these data, dwelling times on the particular bedding structures were statistically analysed as a parameter for bedding preferences. In all three test combinations, a highly significant shaving preference was detected. On average, mice spent 70% of their dwelling time on the shavings. This preference was more explicit during the light period and in C57BL/6J mice. The relative ranking of the bedding structures was: shavings > coarse-grained chips > medium chips = fine chips. By means of these results, a shaving structure as bedding can be recommended for laboratory mice, whereas fine chip structures should be avoided.

  12. Brown rot fungal early stage decay mechanism as a biological pretreatment for softwood biomass in biofuel production

    Ray, Michael J.; Leak, David J.; Spanu, Pietro D.; Murphy, Richard J. [Division of Biology, Faculty of Natural Sciences, Imperial College London, London SW7 2AZ (United Kingdom); Porter Alliance, Imperial College London, London SW7 2AZ (United Kingdom)

    2010-08-15

    A current barrier to the large-scale production of lignocellulosic biofuels is the cost associated with the energy and chemical inputs required for feedstock pretreatment and hydrolysis. The use of controlled partial biological degradation to replace elements of the current pretreatment technologies would offer tangible energy and cost benefits to the whole biofuel process. It has been known for some time from studies of wood decay that, in the early stages of growth in wood, brown rot fungi utilise a mechanism that causes rapid and extensive depolymerisation of the carbohydrate polymers of the wood cell wall. The brown rot hyphae act as delivery vectors to the plant cell wall for what is thought to be a combination of a localised acid pretreatment and a hydroxyl radical based depolymerisation of the cell wall carbohydrate polymers. It is this quality that we have exploited in the present work to enhance the saccharification potential of softwood forest residues for biofuel production. Here we show that after restricted exposure of pine sapwood to brown rot fungi, glucose yields following enzymatic saccharification are significantly increased. Our results demonstrate the potential of using brown rot fungi as a biological pretreatment for biofuel production. (author)

  13. Effect of biodegradation on thermogravimetric and chemical characteristics of hardwood and softwood by brown-rot fungus.

    Gao, Zhenzhong; Fan, Qi; He, Zesen; Wang, Zhinan; Wang, Xiaobo; Sun, Jin

    2016-07-01

    The thermogravimetric and chemical characterization of hardwood Eucalyptus urophylla (Ep) and softwood Pinus massoniana (Mp) pretreated by brown-rot fungus Gloeophyllum trabeum were investigated. The results indicated that the brown-rot fungus pretreatment can optimize the thermal decomposition and decrease the initiation temperatures (8-11°C lower) of both the Ep and Mp pyrolysis. The mean activation energy values of the bio-treated samples were 29.7kJ/mol (for Ep) and 42.3kJ/mol (for Mp) lower than that of the un-treated samples at the conversion rate from 0.1 to 0.7 based on Flynn-Wall-Ozawa (FWO) method. After the bio-pretreatment, the required temperatures were lower (4-7°C) for the pyrolysis rates of hemicellulose and cellulose in Mp reaching maximum and termination. However, the situation was just the opposite for Ep. The variations in chemical properties of hydrogen bonding, as well as the relative changes in lignin/carbohydrate composition of both wood species were also examined. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Two dimensional finite element heat transfer models for softwood

    Hongmei Gu; John F. Hunt

    2004-01-01

    The anisotropy of wood creates a complex problem for solving heat and mass transfer problems that require analyses be based on fundamental material properties of the wood structure. Most heat transfer models use average thermal properties across either the radial or tangential directions and have not differentiated the effects of cellular alignment, earlywood/latewood...

  15. Removal of Water-Soluble Extractives Improves the Enzymatic Digestibility of Steam-Pretreated Softwood Barks.

    Frankó, Balázs; Carlqvist, Karin; Galbe, Mats; Lidén, Gunnar; Wallberg, Ola

    2018-02-01

    Softwood bark contains a large amounts of extractives-i.e., soluble lipophilic (such as resin acids) and hydrophilic components (phenolic compounds, stilbenes). The effects of the partial removal of water-soluble extractives before acid-catalyzed steam pretreatment on enzymatic digestibility were assessed for two softwood barks-Norway spruce and Scots pine. A simple hot water extraction step removed more than half of the water-soluble extractives from the barks, which improved the enzymatic digestibility of both steam-pretreated materials. This effect was more pronounced for the spruce than the pine bark, as evidenced by the 30 and 11% glucose yield improvement, respectively, in the enzymatic digestibility. Furthermore, analysis of the chemical composition showed that the acid-insoluble lignin content of the pretreated materials decreased when water-soluble extractives were removed prior to steam pretreatment. This can be explained by a decreased formation of water-insoluble "pseudo-lignin" from water-soluble bark phenolics during the acid-catalyzed pretreatment, which otherwise results in distorted lignin analysis and may also contribute to the impaired enzymatic digestibility of the barks. Thus, this study advocates the removal of extractives as the first step in the processing of bark or bark-rich materials in a sugar platform biorefinery.

  16. Life Cycle Primary Energy and Carbon Analysis of Recovering Softwood Framing Lumber and Hardwood Flooring for Reuse

    Richard D. Bergman; Hongmei Gu; Thomas R. Napier; James Salazar; Robert H. Falk

    2012-01-01

    Recovering wood for reuse in a new house affects energy and greenhouse gas emissions. This paper finds the energy and emissions for recovering softwood framing lumber and hardwood flooring from an old house for installation in a new house. Recovering wood displaces primary production of new wood products and avoids the end-of-life (EOL) burdens for the old house. We...

  17. REPLACEMENT OF SOFTWOOD KRAFT PULP WITH ECF-BLEACHED BAMBOO KRAFT PULP IN FINE PAPER

    Guanglei Zhao

    2010-06-01

    Full Text Available Non-wood fibers such as bamboo and wheat straw have been playing important roles in the pulp and paper industry in China. In this study an ECF-bleached bamboo kraft pulp was compared with a bleached softwood kraft pulp (NBSK as the reinforcement pulp in fine paper production. Areas that were examined include the refining of pure fibers, influence of bamboo on dewatering, retention, and sizing. The influence of bamboo kraft pulp as a part of a furnish replacing NBSK was compared as well. Results show that fiber shortening was more prominent with bamboo when refined. This resulted in a higher amount of fines, and addition wet-end chemicals may be required to compensate. Handsheets with bamboo as a reinforcement fiber showed similar mechanical and optical properties to handsheets containing NBSK.

  18. New models for estimating the carbon sink capacity of Spanish softwood species

    Ruiz-Peinado, R.; Rio, M. del; Montero, G.

    2011-01-01

    Quantifying the carbon balance in forests is one of the main challenges in forest management. Forest carbon stocks are usually estimated indirectly through biomass equations applied to forest inventories, frequently considering different tree biomass components. The aim of this study is to develop systems of equations for predicting tree biomass components for the main forest softwood species in Spain: Abies alba Mill., A. pinsapo Boiss., Juniperus thurifera L., Pinus canariensis Sweet ex Spreng., P. halepensis Mill., P. nigra Arn., P. pinaster Ait., P. pinea L., P. sylvestris L., P. uncinata Mill. For each species, a system of additive biomass models was fitted using seemingly unrelated regression. Diameter at the breast height and total height were used as independent variables. Diameter appears in all component models, while tree height was included in the stem component model of all species and in some branch component equations. Total height was included in order to improve biomass estimations at different sites. These biomass models were compared to previously available equations in order to test their accuracy and it was found that they yielded better fitting statistics in all cases. Moreover, the models fulfil the additivity property. We also developed root:shoot ratios in order to determine the partitioning into aboveground and belowground biomass. A number of differences were found between species, with a minimum of 0.183 for A. alba and a maximum of 0.385 for P. uncinata. The mean value for the softwood species studied was 0.265. Since the Spanish National Forest Inventory (NFI) records species, tree diameter and height of sample trees, these biomass models and ratios can be used to accurately estimate carbon stocks from NFI data. (Author) 55 refs.

  19. New models for estimating the carbon sink capacity of Spanish softwood species

    Ruiz-Peinado, R.; Rio, M. del; Montero, G.

    2011-07-01

    Quantifying the carbon balance in forests is one of the main challenges in forest management. Forest carbon stocks are usually estimated indirectly through biomass equations applied to forest inventories, frequently considering different tree biomass components. The aim of this study is to develop systems of equations for predicting tree biomass components for the main forest softwood species in Spain: Abies alba Mill., A. pinsapo Boiss., Juniperus thurifera L., Pinus canariensis Sweet ex Spreng., P. halepensis Mill., P. nigra Arn., P. pinaster Ait., P. pinea L., P. sylvestris L., P. uncinata Mill. For each species, a system of additive biomass models was fitted using seemingly unrelated regression. Diameter at the breast height and total height were used as independent variables. Diameter appears in all component models, while tree height was included in the stem component model of all species and in some branch component equations. Total height was included in order to improve biomass estimations at different sites. These biomass models were compared to previously available equations in order to test their accuracy and it was found that they yielded better fitting statistics in all cases. Moreover, the models fulfil the additivity property. We also developed root:shoot ratios in order to determine the partitioning into aboveground and belowground biomass. A number of differences were found between species, with a minimum of 0.183 for A. alba and a maximum of 0.385 for P. uncinata. The mean value for the softwood species studied was 0.265. Since the Spanish National Forest Inventory (NFI) records species, tree diameter and height of sample trees, these biomass models and ratios can be used to accurately estimate carbon stocks from NFI data. (Author) 55 refs.

  20. Steam explosion pretreatment of softwood: the effect of the explosive decompression on enzymatic digestibility.

    Pielhop, Thomas; Amgarten, Janick; von Rohr, Philipp Rudolf; Studer, Michael H

    2016-01-01

    Steam explosion pretreatment has been examined in many studies for enhancing the enzymatic digestibility of lignocellulosic biomass and is currently the most common pretreatment method in commercial biorefineries. The information available about the effect of the explosive decompression on the biochemical conversion is, however, very limited, and no studies prove that the latter is actually enhanced by the explosion. Hence, it is of great value to discern between the effect of the explosion on the one hand and the steaming on the other hand, to identify their particular influences on enzymatic digestibility. The effect of the explosive decompression in the steam explosion pretreatment of spruce wood chips on their enzymatic cellulose digestibility was studied systematically. The explosion had a high influence on digestibility, improving it by up to 90 % compared to a steam pretreatment without explosion. Two factors were identified to be essentially responsible for the effect of the explosion on enzymatic digestibility: pretreatment severity and pressure difference of the explosion. A higher pretreatment severity can soften up and weaken the lignocellulose structure more, so that the explosion can better break up the biomass and decrease its particle size, which enhances its digestibility. In particular, increasing the pressure difference of the explosion leads to more defibration, a smaller particle size and a better digestibility. Though differences were found in the micro- and nanostructure of exploded and non-exploded biomass, the only influence of the explosion on digestibility was found to be the macroscopic particle size reduction. Steam explosion treatments with a high severity and a high pressure difference of the explosion lead to a comparatively high cellulose digestibility of the-typically very recalcitrant-softwood biomass. This is the first study to show that explosion can enhance the enzymatic digestibility of lignocellulosic biomass. If the

  1. Model Study To Assess Softwood Hemicellulose Hydrolysates as the Carbon Source for PHB Production in Paraburkholderia sacchari IPT 101.

    Dietrich, Karolin; Dumont, Marie-Josée; Schwinghamer, Timothy; Orsat, Valérie; Del Rio, Luis F

    2018-01-08

    Softwood hemicellulose hydrolysates are a cheap source of sugars that can be used as a feedstock to produce polyhydroxybutyrates (PHB), which are biobased and compostable bacterial polyesters. To assess the potential of the hemicellulosic sugars as a carbon source for PHB production, synthetic media containing softwood hemicellulose sugars (glucose, mannose, galactose, xylose, arabinose) and the potentially inhibitory lignocellulose degradation products (acetic acid, 5-hydroxymethylfurfural (HMF), furfural, and vanillin) were fermented with the model strain Paraburkholderia sacchari IPT 101. Relative to pure glucose, individual fermentation for 24 h with 20 g/L mannose or galactose exhibited maximum specific growth rates of 97% and 60%, respectively. On the other hand, with sugar mixtures of glucose, mannose, galactose, xylose, and arabinose, the strain converted all sugars simultaneously to reach a maximum PHB concentration of 5.72 g/L and 80.5% PHB after 51 h. The addition of the inhibitor mixture at the following concentration, sodium acetate (2.11 g/L), HMF (0.67 g/L), furfural (0.66 g/L), and vanillin (0.93 g/L), to the sugar mixture stopped the growth entirely within 24 h. Individually, the inhibitors either had no effect or only reduced growth. Moreover, it was found that a bacterial inoculum with high initial cell density (optical density, OD ≥ 5.6) could overcome the growth inhibition to yield an OD of 13 within 24 h. Therefore, softwood hemicellulose sugars are viable carbon sources for PHB production. Nevertheless, real softwood hemicellulose hydrolysates need detoxification or a high inoculum to overcome inhibitory effects and allow bacterial growth.

  2. Decomposition and carbon storage of hardwood and softwood branches in laboratory-scale landfills

    Wang, Xiaoming, E-mail: wangxiaoming@cqu.edu.cn [Key Laboratory of Three Gorges Reservoir Region' s Eco-Environment under Ministry of Education, Chongqing University, Chongqing 400044 (China); Department of Civil, Construction, and Environmental Engineering, Campus Box 7908, North Carolina State University, Raleigh, NC 27695-7908 (United States); Barlaz, Morton A. [Department of Civil, Construction, and Environmental Engineering, Campus Box 7908, North Carolina State University, Raleigh, NC 27695-7908 (United States)

    2016-07-01

    Tree branches are an important component of yard waste disposed in U.S. municipal solid waste (MSW) landfills. The objective of this study was to characterize the anaerobic biodegradability of hardwood (HW) and softwood (SW) branches under simulated but optimized landfill conditions by measuring methane (CH{sub 4}) yields, decay rates, the decomposition of cellulose, hemicellulose and organic carbon, as well as carbon storage factors (CSFs). Carbon conversions to CH{sub 4} and CO{sub 2} ranged from zero to 9.5% for SWs and 17.1 to 28.5% for HWs. When lipophilic or hydrophilic compounds present in some of the HW and SW samples were extracted, some samples showed increased biochemical methane potentials (BMPs). The average CH{sub 4} yield, carbon conversion, and CSF measured here, 59.4 mL CH{sub 4} g{sup −1} dry material, 13.9%, and 0.39 g carbon stored g{sup −1} dry material, respectively, represent reasonable values for use in greenhouse gas inventories in the absence of detailed wood type/species data for landfilled yard waste. - Highlights: • Characterized biodegradation of branches under simulated but optimized landfill conditions • Observed varied biodegradation between HW and SW branches with different diameters • Inhibitory extractives were observed on boughs or twigs of some branch species. • CH{sub 4} yield and carbon storage factors presented for use in landfill related inventories.

  3. Use of softwood sawdust to amend reclaimed soils - a progress report

    Bossenberry, T.; Chollak, D.; Walker, G.; Evans, D. S.; Wilson, J. J.

    1997-01-01

    Updating a report presented at the 1996 annual meeting, these authors reported on an experiment on a 12 hectare site near Bonnyville in northeastern Alberta involving the addition of softwood sawdust, manure and inorganic fertilizers to the clay-rich stoney, glacial till parent material characterized by thin organic-poor cover and low nutrient composition. A nearby site of approximately the same size has been reclaimed using more conventional reclamation methods. The site with the added sawdust progressed slowly during spring and early summer, but more favorably with growing conditions in late 1996. It eventually resulted in better plant cover dominated by clover species with a late catching of grasses as understory vegetation. The conventionally treated site progressed more quickly with better production of both clovers and grasses. In 1997 the sawdust-added site accelerated with better and more consistent plant coverage and a better grass to clover ratio. The sawdust-amended topsoil profile remained stable, had good moisture retention and continued to be well drained and uncompacted. The overall assessment is that amended topsoils provide a short term physical and textural improvement to clay-rich soils and a longer term source of organic material. Therefore sawdust addition is particularly useful in remediating soils where topsoil quality is poor or insufficient for conventional reclamation

  4. Decomposition and carbon storage of hardwood and softwood branches in laboratory-scale landfills

    Wang, Xiaoming; Barlaz, Morton A.

    2016-01-01

    Tree branches are an important component of yard waste disposed in U.S. municipal solid waste (MSW) landfills. The objective of this study was to characterize the anaerobic biodegradability of hardwood (HW) and softwood (SW) branches under simulated but optimized landfill conditions by measuring methane (CH_4) yields, decay rates, the decomposition of cellulose, hemicellulose and organic carbon, as well as carbon storage factors (CSFs). Carbon conversions to CH_4 and CO_2 ranged from zero to 9.5% for SWs and 17.1 to 28.5% for HWs. When lipophilic or hydrophilic compounds present in some of the HW and SW samples were extracted, some samples showed increased biochemical methane potentials (BMPs). The average CH_4 yield, carbon conversion, and CSF measured here, 59.4 mL CH_4 g"−"1 dry material, 13.9%, and 0.39 g carbon stored g"−"1 dry material, respectively, represent reasonable values for use in greenhouse gas inventories in the absence of detailed wood type/species data for landfilled yard waste. - Highlights: • Characterized biodegradation of branches under simulated but optimized landfill conditions • Observed varied biodegradation between HW and SW branches with different diameters • Inhibitory extractives were observed on boughs or twigs of some branch species. • CH_4 yield and carbon storage factors presented for use in landfill related inventories.

  5. Effect of depth beating on the fiber properties and enzymatic saccharification efficiency of softwood kraft pulp.

    Gao, Wenhua; Xiang, Zhouyang; Chen, Kefu; Yang, Rendang; Yang, Fei

    2015-01-01

    Commercial bleached softwood kraft pulp was mechanically fibrillated by a PFI-mill with beating revolution from 5000 to 30,000 r. The extent of fibrillating on the pulp was evaluated by beating degree, fiber morphological properties (fiber length, width, coarseness and curls index), water retention value (WRV) and physical properties of paper made from the pulp. Depth beating process significantly affected the pulp fibrillations as showed by the decreased fiber length and width as well as the SEM analysis, but the effects were limited after beating revolution of 15,000. Depth beating process also improved the total internal pore and inter-fibril surface areas as shown by the increased WRV values. Substrate enzymatic digestibility (SED) of beaten pulp at 5000 revolutions could reach 95% at cellulase loading of 15 FPU/g of glucan. After the enzymatic hydrolysis, the size of the pulp residues was reduced to micro-scale, and a relative uniform size distribution of the residues appeared at 10,000 r beating revolution. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Comparison of dehumidification and heat and vent drying of hem-fir softwood

    Mackay, J F.G.; Nielson, R W

    1988-03-01

    The objective of this project was to demonstrate the performance of dehumidifier kilns, compared to gas-fired, hot-air kilns in drying a commercial grade of softwood lumber. To accomplish this, drying tests were conducted with matched loads of lumber in a new test facility which was constructed to operate as a conventional heat and vent kiln or as a dehumidifier kiln. Comparisons were made of drying times, shrinkage and quality of dried product and total drying energy consumptions. Data from these tests were used in conjunction with capital, energy and other costs obtained from suppliers and operators of existing kilns to make economic comparisons between commercial-sized dehumidifier and heat and vent kilns. These comparisons were made on the basis of equivalent uniform annual costs. Dehumidification drying took about 20% longer and used about 50% of energy compared to heat and vent drying. Analysis of the test runs indicated that further improvements in the energy utilization efficiencies of dehumidifier kilns are feasible since one run indicated an energy consumption of only 36% of that in heat and vent drying. No differences in shrinkage or degrade were apparent. Economic comparisons for three sizes of kilns showed total drying costs by dehumidification to be less for a small-size kiln but more for medium- and large-size operations. Sensitivity analyses were performed to observe the effect of alternate energy prices, dehumidifier energy consumptions, dehumidifier drying times, building costs and degrade. 9 refs., 7 figs., 36 tabs.

  7. Hygromorphic characterization of softwood under high resolution X-ray tomography for hygrothermal simulation

    El Hachem, Chady; Abahri, Kamilia; Vicente, Jérôme; Bennacer, Rachid; Belarbi, Rafik

    2018-03-01

    Because of their complex hygromorphic shape, microstructural study of wooden materials behavior has recently been the point of interest of researchers. The purpose of this study, in a first part, consists in characterizing by high resolution X-ray tomography the microstructural properties of spruce wood. In a second part, the subresulting geometrical parameters will be incorporated when evaluating the wooden hygrothermal transfers behavior. To do so, volume reconstructions of 3 Dimensional images (3D), obtained with a voxel size of 0.5 μm were achieved. The post-treatment of the corresponding volumes has given access to averages and standard deviations of lumens' diameters and cell walls' thicknesses. These results were performed for both early wood and latewood. Further, a segmentation approach for individualizing wood lumens was developed, which presents an important challenge in understanding localized physical properties. In this context, 3D heat and mass transfers within the real reconstructed geometries took place in order to highlight the effect of wood directions on the equivalent conductivity and moisture diffusion coefficients. Results confirm that the softwood cellular structure has a critical impact on the reliability of the studied physical parameters.

  8. Softwood forest thinning as a biomass source for ethanol production: A feasibility study for California

    Kadam, Kiran L; Wooley, Robert J; Aden, Andrew; Nguyen, Quang A; Yancey, Mark A; Ferraro, Francis M [Colorado(United States)

    2000-07-01

    A plan has been put forth to strategically thin northern California forests to reduce fire danger and improve forest health. The resulting biomass residue, instead of being open burned, can be converted into ethanol that can be used as a fuel oxygenate or an octane enhancer. Economic potential for a biomass-to-ethanol facility using this softwood biomass was evaluated for two cases: Stand-alone and co-located. The co-located case refers to a specific site with an existing biomass power facility owned by Wheelabrator Environmental Systems Inc. near Martell, California. A two-stage dilute acid hydrolysis process is used for the production of ethanol from softwoods, and the residual lignin is used to generate steam and electricity. For a plant processing 800 dry tonnes per day of feedstock, the co-located case is an economically attractive concept. Total estimated capital investment is approximately $ 70 million for the co-located case. The resulting internal rate of return is about 24% using 25% equity financing. Hence, such a biomass-to-ethanol plant seems to be an appealing proposition for California, with ethanol replacing methyl tertiary-butyl ether, which is slated for a phaseout. [Spanish] Se ha desarrollado un plan para adelgazar estrategicamente los bosques del norte de California para reducir el peligro de incendio y mejorar la salud del bosque. El residuo resultante de biomasa en vez de ser quemado a la intemperie, puede ser convertido en etanol, el cual se puede utilizar como un combustible oxigenado o como un mejorador del octanaje. Se ha evaluado el potencial economico de una planta de conversion de biomasa a etanol utilizando la biomasa de las coniferas para dos opciones: Una planta independiente o una localizada junto a otra. El caso de la localizada una junto a otra se refiere a un lugar especifico con una instalacion ya existente de biomasa propiedad de Wheelabrator Environmental Systems Inc. cerca de Martell, California. Se utiliza un proceso de

  9. Determination of the most economical drying schedule and air velocity in softwood drying

    Salin, J.G.

    2001-12-01

    Simulation models for conventional softwood drying have been available and have also been used by kiln operators for many years. For instance models for Scots pine and Norway spruce, dried at temperatures below about 80 deg C, are in use in Sweden, Finland and Norway. These models predict drying rates as a function of climate (schedule) and air velocity. The models thus give a direct basis for calculation of instantaneous energy demand for moisture evaporation and ventilation. There is further a direct relationship between the air velocity in the space between the board layers in the kiln stack and the electrical power demand by the circulation fans. Finally, the smaller energy consumption associated with heat losses through kiln walls and the accumulated heat in timber etc. can be estimated with sufficient accuracy. Instantaneous energy costs can thus be calculated for each part of a drying schedule. Capital costs associated with kiln investment and maintenance, personnel, insurance etc can be accounted for as an hourly cost, which is basically independent of whether timber is dried fast or slowly. A slow drying process thus accumulates more capital costs per m 3 timber. In this way it is possible to calculate the total instantaneous drying cost (Euro/m{sup 3}/h or Euro/m3/MC%) and the overall total cost (Euro or Euro/m{sup 3}). Some results obtained with a simulation model equipped with such a cost calculation are presented in the paper. A rapidly increasing drying cost is seen when the final MC is lowered. By minimising the instantaneous cost, an optimal drying schedule can be determined for a given fixed air velocity. Finally an optimal air velocity - constant or varying - can be found in the same way.

  10. Improved Wood Properties Through Genetic Manipulation: Engineering of Syringyl Lignin in Softwood Species Through Xylem-Specific Expression of Hardwood Syringyl Monolignol Pathway Genes

    Chandrashekhar P. Joshi; Vincent L. Chiang

    2009-01-29

    Project Objective: Our long-term goal is to genetically engineer higher value raw materials with desirable wood properties to promote energy efficiency, international competitiveness, and environmental responsiveness of the U.S. forest products industry. The immediate goal of this project was to produce the first higher value softwood raw materials engineered with a wide range of syringyl lignin quantities. Summary: The most important wood property affecting directly the levels of energy, chemical and bleaching requirements for kraft pulp production is lignin. Softwoods contain almost exclusively chemically resistant guaiacyl (G) lignin, whereas hardwoods have more reactive or easily degradable lignins of the guaiacyl (G)-syringyl (S) type. It is also well established that the reactive S lignin component is the key factor that permits much lower effective alkali and temperature, shorter pulping time and less bleaching stages for processing hardwoods than for softwoods. Furthermore, our pulping kinetic study explicitly demonstrated that every increase in one unit of the lignin S/G ratio would roughly double the rate of lignin removal. These are clear evidence that softwoods genetically engineered with S lignin are keys to revolutionizing the energy efficiency and enhancing the environmental performance of this industry. Softwoods and hardwoods share the same genetic mechanisms for the biosynthesis of G lignin. However, in hardwoods, three additional genes branch out from the G-lignin pathway and become specifically engaged in regulating S lignin biosynthesis. In this research, we simultaneously transferred aspen S-specific genes into a model softwood, black spruce, to engineer S lignin.

  11. Comparative study for hardwood and softwood forest biomass: chemical characterization, combustion phases and gas and particulate matter emissions.

    Amaral, Simone Simões; de Carvalho, João Andrade; Costa, Maria Angélica Martins; Soares Neto, Turíbio Gomes; Dellani, Rafael; Leite, Luiz Henrique Scavacini

    2014-07-01

    Two different types of typical Brazilian forest biomass were burned in the laboratory in order to compare their combustion characteristics and pollutant emissions. Approximately 2 kg of Amazon biomass (hardwood) and 2 kg of Araucaria biomass (softwood) were burned. Gaseous emissions of CO2, CO, and NOx and particulate matter smaller than 2.5 μm (PM2.5) were evaluated in the flaming and smoldering combustion phases. Temperature, burn rate, modified combustion efficiency, emissions factor, and particle diameter and concentration were studied. A continuous analyzer was used to quantify gas concentrations. A DataRam4 and a Cascade Impactor were used to sample PM2.5. Araucaria biomass (softwood) had a lignin content of 34.9%, higher than the 23.3% of the Amazon biomass (hardwood). CO2 and CO emissions factors seem to be influenced by lignin content. Maximum concentrations of CO2, NOx and PM2.5 were observed in the flaming phase. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Techno-Economic Analysis of the Optimum Softwood Lignin Content for the Production of Bioethanol in a Repurposed Kraft Mill

    Shufang Wu

    2014-09-01

    Full Text Available Kraft pulping is one possible pretreatment for softwood to economically produce bioethanol. This work evaluates the techno-economic potential of using the kraft process for producing bioethanol from softwoods in a repurposed or co-located kraft mill. Pretreated loblolly pine was enzymatically hydrolyzed at low enzyme dosages of 5 and 10 FPU/g of substrate. Pretreated residue with 13% lignin content had the highest sugar recovery, 32.7% and 47.7% at 5 and 10 FPU/g, respectively. The pretreated residues were oxygen delignified and refined. In all cases, oxygen delignification improved sugar recovery, while refining was mostly effective for pulps with high lignin content. At 5 FPU/g, the sugar recovery for all kraft pulps was 51 to 53% with oxygen delignification and refining. Increasing the enzyme dosage to 10 FPU/g increased the sugar recovery for these pulps to greater than 60%. Economic analysis for the pulps with different initial lignin content showed that kraft pulps with an initial lignin content of 6.7% with oxygen delignification had an ethanol yield of 285 L/ODt wood and the lowest total production cost of $0.55/L. Pulps with initial lignin content of 18.6% had a total production cost of $0.64/L with an ethanol yield of 264 L/ODt wood.

  13. Biodegradation of softwood lignin and guaiacylglycerol-beta-guiacyl ether by extracellular enzyme in shiitake Lentinus edodes (Berk) Sing

    Oki, T.; Senba, Y.; Ishikawa, H.

    1982-01-01

    In order to explain the biodegradation of softwood lignin by shiitake (Lentinus edodes Berk. Sing.), akamatsu (Pinus densiflora Sekb. and Zucc.) dioxane lignin (NDL) and guaicylglycerol-beta-guaiacyl ether (I) were degraded by extracellular enzyme from the NDL-contained potato and malt extracts cultures of shiitake TMI-563 and 655 at 25 degrees C for a prolonged period. The main results on the basis of a functional group analysis and gel-filtration of NDL before and after the enzymatic degradation showed that the degraded DL had a higher content of phenolic OH groups than sound lignin, whereas the methoxyl or aromatic aldehyde-yielding group content was lower in the degraded lignin. The main degradation products formed from I in a crude enzyme solution were guaiacol, guaiacylglycerol, guaiacylglycol-beta-guaiacyl ether (II), and guaiacoxyacetoguaiacone (III), although the polymer was formed at pH 4.0, which is the optimum pH of peroxidase and laccase. It also was clarified that the oxidative polymerization of NDL and I occurred preferably in a crude enzyme solution at pH 4.0, and that these compounds were degraded to lower molecular fragments at pH 6.8 under the same conditions. From the above results, it is suggested that softwood lignin is more effectively degraded by the other enzyme than polyphenoloxidase, such as laccase and peroxidase, in a crude enzyme solution of L. edodes. (Refs. 9).

  14. Changes in the DRIFT Spectra of Softwood Materials Irradiated by UV-laser as a Function of Energy

    BARTA, Edit

    2005-01-01

    Full Text Available We investigated energy dependence of the effect of UV-laser irradiation on the DRIFT spectra of softwood samples. Changes in the spectra of softwoods have been studied with 248.5 nm wavelength of UV-laser radiation. To monitor the energy dependence, different number of laser impulses were directed towards the sample’s surface. The dependence on energy of different bands can be listed into four groups. Broad absorption bands, which belong to the same chemical groups located at various positions, do not show consistent changes due to the absorption of different energy dozes. The intensity of OH bands for the treated samples can be higher or lower depending on the amount of radiation energy. In the CHn and in the band of non-conjugated carbonyl groups only absorption increase can be observed. Bands resulting from only one chemical component, and containing no other absorption maxima around them, uniformly decreased. The regions where the band of a chemical component lies next to another one, showed no consistent changes during the irradiation. The initial decrease was followed by increase.

  15. Alkaline peroxide treatment of ECF bleached softwood kraft pulps: part 2. effect of increased fiber charge on refining, wet-end application, and hornification

    Zheng Dang; Thomas Elder; Jeffery S. Hsieh; Arthur J. Ragauskas

    2007-01-01

    The effect of increased fiber charge on refining, cationic starch adsorption, and hornification was examined. Two pulps were investigated: (1) a softwood (SW) kraft pulp (KP) which was bleached elementally chlorine-free (ECF) and sewed as control; and (2) a control pulp treated with alkaline peroxide, which had a higher fiber charge. It was shown that increased fiber...

  16. Wood pellets, what else? Greenhouse gas parity times of European electricity from wood pellets produced in the south-eastern United States using different softwood feedstocks

    Hanssen, Steef V. [Radboud Univ., Nijmegen (Netherlands). Dept. of Environmental Science, Faculty of Science; Utrecht Univ., Utrecht (The Netherlands). Copernicus Inst. of Sustainable Development, Faculty of Geosciences; Duden, Anna S. [Utrecht Univ., Utrecht (The Netherlands). Copernicus Inst. of Sustainable Development, Faculty of Geosciences; Junginger, Martin [Utrecht Univ., Utrecht (The Netherlands). Copernicus Inst. of Sustainable Development, Faculty of Geosciences; Dale, Virginia H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Environmental Sciences Division, Center for BioEnergy Sustainability; van der Hilst, Floor [Utrecht Univ., Utrecht (The Netherlands). Copernicus Inst. of Sustainable Development, Faculty of Geosciences

    2016-12-29

    Several EU countries import wood pellets from the south-eastern United States. The imported wood pellets are (co-)fired in power plants with the aim of reducing overall greenhouse gas (GHG) emissions from electricity and meeting EU renewable energy targets. To assess whether GHG emissions are reduced and on what timescale, we construct the GHG balance of wood-pellet electricity. This GHG balance consists of supply chain and combustion GHG emissions, carbon sequestration during biomass growth, and avoided GHG emissions through replacing fossil electricity. We investigate wood pellets from four softwood feedstock types: small roundwood, commercial thinnings, harvest residues, and mill residues. Per feedstock, the GHG balance of wood-pellet electricity is compared against those of alternative scenarios. Alternative scenarios are combinations of alternative fates of the feedstock material, such as in-forest decomposition, or the production of paper or wood panels like oriented strand board (OSB). Alternative scenario composition depends on feedstock type and local demand for this feedstock. Results indicate that the GHG balance of wood-pellet electricity equals that of alternative scenarios within 0 to 21 years (the GHG parity time), after which wood-pellet electricity has sustained climate benefits. Parity times increase by a maximum of twelve years when varying key variables (emissions associated with paper and panels, soil carbon increase via feedstock decomposition, wood-pellet electricity supply chain emissions) within maximum plausible ranges. Using commercial thinnings, harvest residues or mill residues as feedstock leads to the shortest GHG parity times (0-6 years) and fastest GHG benefits from wood-pellet electricity. Here, we find shorter GHG parity times than previous studies, for we use a novel approach that differentiates feedstocks and considers alternative scenarios based on (combinations of) alternative feedstock fates, rather than on alternative land

  17. STUDIES ON HIBISCUS CANNABINUS, HIBISCUS SABDARIFFA, AND CANNABINUS SATIVA PULP TO BE A SUBSTITUTE FOR SOFTWOOD PULP- PART 1: AS-AQ DELIGNIFICATION PROCESS

    Dharm Dutt; J. S. Upadhyaya; C. H. Tyagi

    2010-01-01

    Hibiscus cannabinus, Hibiscus sabdariffa, and Cannabinus sativa, which are renewable non-woody fiber resources having characteristics similar to that of softwood (bast fibers), when used together with hardwood (core fibers), gave higher pulp yield with good mechanical strength properties when using an alkaline sulphite-anthraquinone (AS-AQ) pulping process rather than a conventional kraft pulping process and bleached more readily than kraft and soda pulps with a CEHH bleaching sequence. A com...

  18. Bio-oil production of softwood and hardwood forest industry residues through fast and intermediate pyrolysis and its chromatographic characterization.

    Torri, Isadora Dalla Vecchia; Paasikallio, Ville; Faccini, Candice Schmitt; Huff, Rafael; Caramão, Elina Bastos; Sacon, Vera; Oasmaa, Anja; Zini, Claudia Alcaraz

    2016-01-01

    Bio-oils were produced through intermediate (IP) and fast pyrolysis (FP), using Eucalyptus sp. (hardwood) and Picea abies (softwood), wood wastes produced in large scale in Pulp and Paper industries. Characterization of these bio-oils was made using GC/qMS and GC×GC/TOFMS. The use of GC×GC provided a broader characterization of bio-oils and it allowed tracing potential markers of hardwood bio-oil, such as dimethoxy-phenols, which might co-elute in 1D-GC. Catalytic FP increased the percentage of aromatic hydrocarbons in P. abies bio-oil, indicating its potential for fuel production. However, the presence of polyaromatic hydrocarbons (PAH) draws attention to the need of a proper management of pyrolysis process in order to avoid the production of toxic compounds and also to the importance of GC×GC/TOFMS use to avoid co-elutions and consequent inaccuracies related to identification and quantification associated with GC/qMS. Ketones and phenols were the major bio-oil compounds and they might be applied to polymer production. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Life cycle environmental performance of renewable building materials in the context of residential construction : phase II research report: an extension to the 2005 phase I research report. Module D, Life cycle inventory of softwood lumber manufacturing in the Northeastern and North Central United States.

    Richard D. Bergman; Scott A. Bowe

    2009-01-01

    The goal of this study was to gain an understanding of the environmental impact for softwood lumber production through a gate-to-gate life-cycle inventory (LCI) of softwood sawmills in the northeastern and north central United States (NE/NC). Primary mill data were collected per Consortium on Research for Renewable Industrial Material (CORRIM) Research Guidelines (...

  20. Production-ecological analysis of herb layer in the softwood floodplain forests formed after the gabčíkovo waterwork construction and their characteristics

    Vojtková Jana

    2014-03-01

    Full Text Available This paper is focused on phytocoenological characteristics and production analysis of herbaceous layer biomass of the softwood floodplain forests (Salici-Populetum (R. Tx. 1931 Meijer Drees 1936 association and their phytocoenological characteristics. The sampling site was located in the young stands, which were formed after the Gabčíkovo Waterwork construction in 1992. Redirection of the major ratio of flow into the supply channel has caused essential decrease of water level in the old Danube riverbed. As a result of this, new bare sites have appeared having character of pioneer habitat. In the process of primary succession, new softwood floodplain forests have formed here within a few years. These stands are the subject of the study presented in this paper. We estimated herb layer biomass using indirect sampling modified for non-repeated field measurements (Kubíček, Brechtl, 1970. Total biomass of herbaceous layer was estimated to be 5577 kg ha−1, the aboveground biomass was 4065 kg ha−1 while the belowground biomass was 1512 kg ha−1. The results were compared with the data of Kubíček et al. (2009 and Kollár et al. (2010. Some attention was also paid to their phytocoenologic characteristics. Considering this, it seems that they represent full-value softwood floodplain forest of the Salici-Populetum association despite a bit higher occurrence of some synanthropic species. Such statement is supported by comparison with the data of Jurko (1958 and Šomšák (2003.

  1. Cytotoxic and genotoxic responses of human lung cells to combustion smoke particles of Miscanthus straw, softwood and beech wood chips

    Arif, Ali Talib; Maschowski, Christoph; Garra, Patxi; Garcia-Käufer, Manuel; Petithory, Tatiana; Trouvé, Gwenaëlle; Dieterlen, Alain; Mersch-Sundermann, Volker; Khanaqa, Polla; Nazarenko, Irina; Gminski, Richard; Gieré, Reto

    2017-08-01

    Inhalation of particulate matter (PM) from residential biomass combustion is epidemiologically associated with cardiovascular and pulmonary diseases. This study investigates PM0.4-1 emissions from combustion of commercial Miscanthus straw (MS), softwood chips (SWC) and beech wood chips (BWC) in a domestic-scale boiler (40 kW). The PM0.4-1 emitted during combustion of the MS, SWC and BWC were characterized by ICP-MS/OES, XRD, SEM, TEM, and DLS. Cytotoxicity and genotoxicity in human alveolar epithelial A549 and human bronchial epithelial BEAS-2B cells were assessed by the WST-1 assay and the DNA-Alkaline Unwinding Assay (DAUA). PM0.4-1 uptake/translocation in cells was investigated with a new method developed using a confocal reflection microscope. SWC and BWC had a inherently higher residual water content than MS. The PM0.4-1 emitted during combustion of SWC and BWC exhibited higher levels of Polycyclic Aromatic Hydrocarbons (PAHs), a greater variety of mineral species and a higher heavy metal content than PM0.4-1 from MS combustion. Exposure to PM0.4-1 from combustion of SWC and BWC induced cytotoxic and genotoxic effects in human alveolar and bronchial cells, whereby the strongest effect was observed for BWC and was comparable to that caused by diesel PM (SRM 2 975), In contrast, PM0.4-1 from MS combustion did not induce cellular responses in the studied lung cells. A high PAH content in PM emissions seems to be a reliable chemical marker of both combustion efficiency and particle toxicity. Residual biomass water content strongly affects particulate emissions and their toxic potential. Therefore, to minimize the harmful effects of fine PM on health, improvement of combustion efficiency (aiming to reduce the presence of incomplete combustion products bound to PM) and application of fly ash capture technology, as well as use of novel biomass fuels like Miscanthus straw is recommended.

  2. Two-dimensional finite element heat transfer model of softwood. Part I, Effective thermal conductivity

    John F. Hunt; Hongmei Gu

    2006-01-01

    The anisotropy of wood complicates solution of heat and mass transfer problems that require analyses be based on fundamental material properties of the wood structure. Most heat transfer models use average thermal properties across either the radial or tangential direction and do not differentiate the effects of cellular alignment, earlywood/latewood differences, or...

  3. Multistep process to produce fermentable sugars and lignosulfonates from softwood enzymolysis residues

    Yalan Liu; Jinwu Wang; Michael P. Wolcott

    2016-01-01

    The residual solids from enzymatic hydrolysis are usually burned to produce energy and have been explored as a feedstock for various products including activated carbon and lignin based polymers. These products require additional procedures unrelated to the existing biorefinery equipment. In the current study, we proposed successive sulfite treatments to utilize the...

  4. Amphipathic lignin derivatives to accelerate simultaneous saccharification and fermentation of unbleached softwood pulp for bioethanol production.

    Cheng, Ningning; Yamamoto, Yoko; Koda, Keiichi; Tamai, Yutaka; Uraki, Yasumitsu

    2014-12-01

    Amphipathic lignin derivatives (A-LDs) were already demonstrated to improve enzymatic saccharification of lignocellulose. Based on this knowledge, two kinds of A-LDs prepared from black liquor of soda pulping of Japanese cedar were applied to a fed-batch simultaneous saccharification and fermentation (SSF) process for unbleached soda pulp of Japanese cedar to produce bioethanol. Both lignin derivatives slightly accelerated yeast fermentation of glucose but not inhibited it. In addition, ethanol yields based on the theoretical maximum ethanol production in the fed-batch SSF process was increased from 49% without A-LDs to 64% in the presence of A-LDs. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Membrane treatment of alkaline bleaching effluents from elementary chlorine free kraft softwood cellulose production.

    Oñate, Elizabeth; Rodríguez, Edgard; Bórquez, Rodrigo; Zaror, Claudio

    2015-01-01

    This paper reports experimental results on the sequential use of ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) to fractionate alkaline extraction bleaching effluents from kraft cellulose production. The aim was to unveil the way key pollutants are distributed when subjected to sequential UF/NF/RO membrane separation processes. Alkaline bleaching effluents were obtained from a local pinewood-based mill, featuring elementary chlorine free bleaching to produce high-brightness cellulose. The experimental system was based on a laboratory-scale membrane system, DSS LabStak® M20 Alfa Laval, using Alfa Laval UF and NF/RO membranes, operated at a constant transmembrane pressure (6 bar for UF membranes and 32 bar for NF/RO membranes), at 25°C. Results show that 78% chemical oxygen demand (COD) and total phenols, 82% adsorbable organic halogens (AOX) and 98% colour were retained by UF membranes which have molecular weight cut-off (MWCO) above 10 kDa. In all, 16% of original COD, total phenols and AOX, and the remaining 2% colour were retained by UF membranes within the 1 to 10 kDa MWCO range. Chloride ions were significantly present in all UF permeates, and RO was required to obtain a high-quality permeate with a view to water reuse. It is concluded that UF/NF/RO membranes offer a feasible option for water and chemicals recovery from alkaline bleaching effluents in kraft pulp production.

  6. Moisture-related mechanical properties of softwood: 3D micromechanical modeling

    Qing, Hai; Mishnaevsky, Leon

    2009-01-01

    Computational micromechanical analysis of the influence of moisture, density and microstructure of latewood on its hydroelastic and shrinkage properties is carried out. The elastic properties of cell sublayers have been determined using the unit cell models as for fiber reinforced composites (two....... The results for elastic properties of cell sublayers obtained from the unit cell models, from the self-consistent method and Halpin-Tsai equations are compared, and good agreement between these methods was observed. A computational technique, based on the representation of moisture effect as equivalent...... temperature-caused effects, has been developed and employed to the modeling of the moisture-related changes of the elastic properties of cell layers. A series of computational experiments have been carried out. In the simulations, it was observed that the shrinkage coefficients of longitudinal direction...

  7. Techno-economic evaluation of stillage treatment with anaerobic digestion in a softwood-to-ethanol process

    Barta Zsolt

    2010-09-01

    Full Text Available Abstract Background Replacing the energy-intensive evaporation of stillage by anaerobic digestion is one way of decreasing the energy demand of the lignocellulosic biomass to the ethanol process. The biogas can be upgraded and sold as transportation fuel, injected directly into the gas grid or be incinerated on-site for combined heat and power generation. A techno-economic evaluation of the spruce-to-ethanol process, based on SO2-catalysed steam pretreatment followed by simultaneous saccharification and fermentation, has been performed using the commercial flow-sheeting program Aspen Plus™. Various process configurations of anaerobic digestion of the stillage, with different combinations of co-products, have been evaluated in terms of energy efficiency and ethanol production cost versus the reference case of evaporation. Results Anaerobic digestion of the stillage showed a significantly higher overall energy efficiency (87-92%, based on the lower heating values, than the reference case (81%. Although the amount of ethanol produced was the same in all scenarios, the production cost varied between 4.00 and 5.27 Swedish kronor per litre (0.38-0.50 euro/L, including the reference case. Conclusions Higher energy efficiency options did not necessarily result in lower ethanol production costs. Anaerobic digestion of the stillage with biogas upgrading was demonstrated to be a favourable option for both energy efficiency and ethanol production cost. The difference in the production cost of ethanol between using the whole stillage or only the liquid fraction in anaerobic digestion was negligible for the combination of co-products including upgraded biogas, electricity and district heat.

  8. Techno-economic evaluation of stillage treatment with anaerobic digestion in a softwood-to-ethanol process.

    Barta, Zsolt; Reczey, Kati; Zacchi, Guido

    2010-09-15

    Replacing the energy-intensive evaporation of stillage by anaerobic digestion is one way of decreasing the energy demand of the lignocellulosic biomass to the ethanol process. The biogas can be upgraded and sold as transportation fuel, injected directly into the gas grid or be incinerated on-site for combined heat and power generation. A techno-economic evaluation of the spruce-to-ethanol process, based on SO2-catalysed steam pretreatment followed by simultaneous saccharification and fermentation, has been performed using the commercial flow-sheeting program Aspen Plus™. Various process configurations of anaerobic digestion of the stillage, with different combinations of co-products, have been evaluated in terms of energy efficiency and ethanol production cost versus the reference case of evaporation. Anaerobic digestion of the stillage showed a significantly higher overall energy efficiency (87-92%), based on the lower heating values, than the reference case (81%). Although the amount of ethanol produced was the same in all scenarios, the production cost varied between 4.00 and 5.27 Swedish kronor per litre (0.38-0.50 euro/L), including the reference case. Higher energy efficiency options did not necessarily result in lower ethanol production costs. Anaerobic digestion of the stillage with biogas upgrading was demonstrated to be a favourable option for both energy efficiency and ethanol production cost. The difference in the production cost of ethanol between using the whole stillage or only the liquid fraction in anaerobic digestion was negligible for the combination of co-products including upgraded biogas, electricity and district heat.

  9. Comparative technoeconomic analysis of a softwood ethanol process featuring posthydrolysis sugars concentration operations and continuous fermentation with cell recycle.

    Schneiderman, Steven J; Gurram, Raghu N; Menkhaus, Todd J; Gilcrease, Patrick C

    2015-01-01

    Economical production of second generation ethanol from Ponderosa pine is of interest due to widespread mountain pine beetle infestation in the western United States and Canada. The conversion process is limited by low glucose and high inhibitor concentrations resulting from conventional low-solids dilute acid pretreatment and enzymatic hydrolysis. Inhibited fermentations require larger fermentors (due to reduced volumetric productivity) and low sugars lead to low ethanol titers, increasing distillation costs. In this work, multiple effect evaporation (MEE) and nanofiltration (NF) were evaluated to concentrate the hydrolysate from 30 g/l to 100, 150, or 200 g/l glucose. To ferment this high gravity, inhibitor containing stream, traditional batch fermentation was compared with continuous stirred tank fermentation (CSTF) and continuous fermentation with cell recycle (CSTF-CR). Equivalent annual operating cost (EAOC = amortized capital + yearly operating expenses) was used to compare these potential improvements for a local-scale 5 MGY ethanol production facility. Hydrolysate concentration via evaporation increased EAOC over the base process due to the capital and energy intensive nature of evaporating a very dilute sugar stream; however, concentration via NF decreased EAOC for several of the cases (by 2 to 15%). NF concentration to 100 g/l glucose with a CSTF-CR was the most economical option, reducing EAOC by $0.15 per gallon ethanol produced. Sensitivity analyses on NF options showed that EAOC improvement over the base case could still be realized for even higher solids removal requirements (up to two times higher centrifuge requirement for the best case) or decreased NF performance. © 2015 American Institute of Chemical Engineers.

  10. Quality drying of softwood lumber : guidebook - checklist

    M. R. Milota; J. D. Danielson; R. S. Boone; D. W. Huber

    The IMPROVE Lumber Drying Program is intended to increase awareness of the lumber drying system as a critical component in the manufacture of quality lumber. One objective of the program is to provide easy-to-use tools that a kiln operator can use to maintain an efficient kiln operation and therefore contribute to lumber drying quality. This report is one component of...

  11. A Case History of Embankment Failure: Geological and Geotechnical Aspects of the Celotex Levee Failure, New Orleans, Louisiana

    Dunbar, Joseph

    1999-01-01

    .... The data examined during research on the causes of levee failure included geologic setting, historic bank migration and previous bank lines, thalweg profiles, width/depth ratios, scour pool movement, and river profiles...

  12. Fibre volume losses of eight softwood clearfell harvesting systems in ...

    Eight treatments were examined: four terminated with merchandising at roadside landing and four at erchandising yards. Within the treatments, felling was either motor-manual or mechanised and compartments were classed by average compartment tree size (less than or greater than 1 m3). Total wood utilisation was found ...

  13. Fate of triazoles in softwood upon environmental exposure.

    Kukowski, Klara; Martinská, Veronika; Sedgeman, Carl A; Kuplic, Paige; Kozliak, Evguenii I; Fisher, Stephen; Kubátová, Alena

    2017-10-01

    Determining the fate of preservatives in commercial wood products is essential to minimize their losses and improve protective impregnation techniques. The fate of triazole fungicides in ponderosa pine wood was investigated in both outdoor and controlled-environment experiments using a representative triazole, tebuconazole (TAZ), which was accompanied by propiconazole (PAZ) in selected experiments. The study was designed to mimic industrial settings used in window frame manufacturing. To investigate the TAZ fate in detail, loosely and strongly bound fractions were differentiated using a multi-step extraction. The loosely bound TAZ fraction extracted through two sonications accounted for 85± 5% of the total TAZ, while the strongly bound TAZ was extracted only with an exhaustive Soxhlet extraction and corresponded to the remaining 15± 5%. A significant fraction (∼80%) of the original TAZ remained in the wood despite a six-month exposure to harsh environmental conditions, maintaining wood preservation and assuring minimal environmental impact. Depletion of loosely bound TAZ was observed from cross-sectional surfaces when exposed to rain, high humidity and sunlight. Water leaching was deemed to be the major route leading to triazole losses from wood. Leaching rate was found to be slightly higher for TAZ than for PAZ. The contribution of bio-, photo- and thermal degradation of triazoles was negligible as both PAZ and TAZ sorbed in wood remained intact. Triazole evaporation was also found to be minor at the moderate temperature (20-25 °C) recorded throughout the outdoor study. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Clearwood quality and softwood lumber prices: what's the real premium?

    Thomas R. Waggener; Roger D. Fight

    1999-01-01

    Diminishing quantities of appearance grade lumber and rising price premiums for it have accompanied the transition from old-growth to young-growth timber. The price premiums for better grades are an incentive for producers to undertake investments to increase the yield of those higher valued products. Price premiums, however, are also an incentive for users to...

  15. Experimental evaluation of mechanical properties of softwood using acoustic methods

    Tippner, J.; Hrivnák, J.; Kloiber, Michal

    2016-01-01

    Roč. 11, č. 1 (2016), s. 503-518 ISSN 1930-2126 R&D Projects: GA MK(CZ) DF11P01OVV001 Keywords : non destructive testing * Norway spruce * Scots pine * Silver fir * sound speed * strength * stress wave Subject RIV: AL - Art, Architecture, Cultural Heritage Impact factor: 1.321, year: 2016 http://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_11_1_503_Tippner_Mechanical_Properties_Acoustic_Methods/4018

  16. HEATING CHARACTERISTICS OF SOFTWOODS IN A HIGH FREQUENCY FIELD

    Ciprian LĂZĂRESCU

    2012-12-01

    Full Text Available The research aimed to establish whetherdielectric heating at radio frequencies might be afeasible option for phytosanitation of green softwoodboards. Results are presented for two softwoodspecies, namely, lodgepole pine (Pinus contorta andwestern red cedar (Thujaplicata Donn., and forsingle-specimen testing configurations with a crosssection of 40x90mm surrounded on three sides bysimilar cross-section kiln dried boards. In terms ofdielectric properties, red cedar is nature "designed" toabsorb more easily the dielectric fields. Heating rateswere not correlated with moisture content for neitherspecies investigated thus underlining the versatility ofRF-heating that allows simultaneous rise oftemperature within dry and wet areas. Convectionlosses through air contact may reduce the averageheating rate of the shell by about 40%.

  17. A South African softwood sawtimber supply chain case study ...

    Supply chain management principles were analysed by investigating the effects of smaller-scale and incremental interventions in a forest-to-mill value chain on financial returns and forest resource use in an Eastern Cape case study area. Three previous studies provided input by determining fibre balances, a terrain factor, ...

  18. Programmable calculator programs to solve softwood volume and value equations.

    Janet K. Ayer. Sachet

    1982-01-01

    This paper presents product value and product volume equations as programs for handheld calculators. These tree equations are for inland Douglas-fir, young-growth Douglas-fir, western white pine, ponderosa pine, and western larch. Operating instructions and an example are included.

  19. Abundance and reactivity of dibenzodioxocins in softwood lignin.

    Argyropoulos, Dimitris S; Jurasek, Lubo; Kristofová, Lívia; Xia, Zhicheng; Sun, Yujun; Palus, Ernest

    2002-02-13

    To define the abundance and comprehend the reactivity of dibenzodioxocins in lignin, model compound studies, specific degradation experiments on milled wood lignin, and molecular modeling calculations have been performed. Quantitative (31)P NMR measurements of the increase of biphenolic hydroxyl groups formed after a series of alkaline degradations in the presence of hydrosulfide anions (kraft conditions) showed the presence of 3.7 dibenzodioxocin rings/100 C9 units in milled wood lignin. The DFRC degradation protocol (Derivatization Followed by Reductive Cleavage) was chosen as an independent means to estimate their abundance. Initial experiments with a dibenzodioxocin model compound, trans-6,7-dihydro-7-(4-hydroxy-3-methoxyphenyl)-4,9-dimethoxy-2,11-dipropyldibenzo[e,g][1,4]dioxocin-6-ylmethanol, showed that it is not cleaved under DFRC conditions, but rather it isomerizes into a cyclic oxepine structure. Steric effects precluded this isomerization from occurring when DFRC was applied to milled wood lignin. Instead, monoacetylated biphenolic moieties were released and quantified by (31)P NMR, at 4.3 dibenzodioxocin rings/100 C9 units. The dibenzodioxocin content in residual lignins isolated from kraft pulps delignified to various degrees showed that during pulp delignification, the initial rate of dibenzodioxocin removal was considerably greater than the cleavage rate of arylglycerol-beta-aryl ether bonds. The activation energy for the degradation of dibenzodioxocins under kraft conditions in milled wood lignin was 96 +/- 9 kJ/mol, similar to that of arylglycerol-beta-aryl ether bond cleavage.

  20. INDUSTRIAL EVALUATION OF RE-DRY STRATEGY FOR SOFTWOOD LUMBER

    Elustondo, Diego; Avramidis, Stavros

    2005-01-01

    This paper presents an experimental evaluation of the first commercial scale dry-sort-redry (DSRD) strategy for drying of 2x4 Pacific coast hemlock (PCH) lumber. The DSRD strategy is a methodology designed to reduce final moisture content variability in kiln dried lumber by complementing conventional drying with radio frequency vacuum (RFV) drying technology. The strategy′s objective is to avoid producing over-dried lumber in conventional drying by setting the target moisture content to...

  1. An assessment of the industrial markets for softwood clearwood lumber.

    Ivan L. Eastin; Christine L. Lane; Roger D. Fight; Jamie Barbour

    1998-01-01

    The purpose of this project was to assess market opportunities for second growth clearwood lumber by identifying industry segments that currently utilize clearwood lumber and determining whether alternative markets will continue to exist for clearwood lumber produced from intensively managed forests in the Pacific Northwest. A survey of industrial lumber...

  2. 19 CFR 12.142 - Entry of softwood lumber and softwood lumber products from any country into the United States.

    2010-04-01

    ... purposes of paragraph (c)(1) of this section, the following definitions apply: (A) F.O.B. The term “F.O.B... Tariff Act of 1930, as amended (19 U.S.C. 1202 et seq.); and (B) To the best of the person's knowledge and belief: (1) The export price provided is determined in accordance with the definition set forth in...

  3. Base

    Hjulmand, Lise-Lotte; Johansson, Christer

    2004-01-01

    BASE - Engelsk basisgrammatik er resultatet af Lise-Lotte Hjulmands grundige bearbejdning og omfattende revidering af Christer Johanssons Engelska basgrammatik. Grammatikken adskiller sig fra det svenske forlæg på en lang række punkter. Den er bl.a. tilpasset til et dansk publikum og det danske...

  4. Characterization of electrospun lignin based carbon fibers

    Poursorkhabi, Vida; Mohanty, Amar; Misra, Manjusri [School of Engineering, Thornbrough Building, University of Guelph, Guelph, N1G 2W1, Ontario (Canada); Bioproducts Discovery and Development Centre, Department of Plant Agriculture, Crop Science Building, University of Guelph, Guelph, N1G 2W1, Ontario (Canada)

    2015-05-22

    The production of lignin fibers has been studied in order to replace the need for petroleum based precursors for carbon fiber production. In addition to its positive environmental effects, it also benefits the economics of the industries which cannot take advantage of carbon fiber properties because of their high price. A large amount of lignin is annually produced as the byproduct of paper and growing cellulosic ethanol industry. Therefore, finding high value applications for this low cost, highly available material is getting more attention. Lignin is a biopolymer making about 15 – 30 % of the plant cell walls and has a high carbon yield upon carbonization. However, its processing is challenging due to its low molecular weight and also variations based on its origin and the method of separation from cellulose. In this study, alkali solutions of organosolv lignin with less than 1 wt/v% of poly (ethylene oxide) and two types of lignin (hardwood and softwood) were electrospun followed by carbonization. Different heating programs for carbonization were tested. The carbonized fibers had a smooth surface with an average diameter of less than 5 µm and the diameter could be controlled by the carbonization process and lignin type. Scanning electron microscopy (SEM) was used to study morphology of the fibers before and after carbonization. Thermal conductivity of a sample with amorphous carbon was 2.31 W/m.K. The electrospun lignin carbon fibers potentially have a large range of application such as in energy storage devices and water or gas purification systems.

  5. Characterization of electrospun lignin based carbon fibers

    Poursorkhabi, Vida; Mohanty, Amar; Misra, Manjusri

    2015-01-01

    The production of lignin fibers has been studied in order to replace the need for petroleum based precursors for carbon fiber production. In addition to its positive environmental effects, it also benefits the economics of the industries which cannot take advantage of carbon fiber properties because of their high price. A large amount of lignin is annually produced as the byproduct of paper and growing cellulosic ethanol industry. Therefore, finding high value applications for this low cost, highly available material is getting more attention. Lignin is a biopolymer making about 15 – 30 % of the plant cell walls and has a high carbon yield upon carbonization. However, its processing is challenging due to its low molecular weight and also variations based on its origin and the method of separation from cellulose. In this study, alkali solutions of organosolv lignin with less than 1 wt/v% of poly (ethylene oxide) and two types of lignin (hardwood and softwood) were electrospun followed by carbonization. Different heating programs for carbonization were tested. The carbonized fibers had a smooth surface with an average diameter of less than 5 µm and the diameter could be controlled by the carbonization process and lignin type. Scanning electron microscopy (SEM) was used to study morphology of the fibers before and after carbonization. Thermal conductivity of a sample with amorphous carbon was 2.31 W/m.K. The electrospun lignin carbon fibers potentially have a large range of application such as in energy storage devices and water or gas purification systems

  6. Recent Progress in Producing Lignin-Based Carbon Fibers for Functional Applications

    Paul, Ryan [GrafTech International Holdings Inc.; Burwell, Deanna [GrafTech International Holdings Inc.; Dai, Xuliang [GrafTech International Holdings Inc.; Naskar, Amit [Oak Ridge National Laboratory; Gallego, Nidia [Oak Ridge National Laboratory; Akato, Kokouvi [Oak Ridge National Laboratory

    2015-10-29

    Lignin, a biopolymer, has been investigated as a renewable and low-cost carbon fiber precursor since the 1960s. Although successful lab-scale production of lignin-based carbon fibers has been reported, there are currently not any commercial producers. This paper will highlight some of the known challenges with converting lignin-based precursors into carbon fiber, and the reported methods for purifying and modifying lignin to improve it as a precursor. Several of the challenges with lignin are related to its diversity in chemical structure and purity, depending on its biomass source (e.g. hardwood, softwood, grasses) and extraction method (e.g. organosolv, kraft). In order to make progress in this field, GrafTech and Oak Ridge National Laboratory are collaborating to develop lignin-based carbon fiber technology and to demonstrate it in functional applications, as part of a cooperative agreement with the DOE Advanced Manufacturing Office. The progress made to date with producing lignin-based carbon fiber for functional applications, as well as developing and qualifying a supply chain and value proposition, are also highlighted.

  7. The Effect of Plant Source on the Properties of Lignin-Based Polyurethanes

    Jason M. Lang

    2018-02-01

    Full Text Available This work increases our understanding of the effect of plant source on the mechanical and morphological properties of lignin-based polyurethanes (PUs. Lignin is a polymer that is synthesized inside the plant cell wall and can be used as a polyol to synthesize PUs. The specific aromatic structure of the lignin is heavily reliant on the plant source from which it is extracted. These results show that the mechanical properties of lignin-based PUs differ based on lignin’s plant source. The morphology of lignin-based PUs was examined using atomic force microscopy and scanning electron microscopy and the mechanical properties of lignin-based PU samples were measured using dynamic mechanical analysis and shore hardness (Type A. The thermal analysis and morphology studies demonstrate that all PUs prepared form a multiphase morphology. In these PUs, better mixing was observed in the wheat straw lignin PU samples leading to higher moduli than in the hardwood lignin and softwood lignin PUs whose morphology was dominated by larger aggregates. Independent of the type of the lignin used, increasing the fraction of lignin increased the rigidity of PU. Among the different types of lignin studied, PU with wheat straw soda lignin exhibited storage moduli ~2-fold higher than those of PUs incorporating other lignins. This study also showed that during synthesis all hydroxyl groups in the lignin are not available to react with isocyanates, which alters the number of cross-links formed within the PU and impacts the mechanical properties of the material.

  8. Towards More Sustainable Material Formulations: A Comparative Assessment of PA11-SGW Flexural Performance versus Oil-Based Composites

    Helena Oliver-Ortega

    2018-04-01

    Full Text Available The replacement of commodity polyolefin, reinforced with glass fiber (GF, by greener alternatives has been a topic of research in recent years. Cellulose fibers have shown, under certain conditions, enough tensile capacities to replace GF, achieving competitive mechanical properties. However, if the objective is the production of environmentally friendlier composites, it is necessary to replace oil-derived polymer matrices by bio-based or biodegradable ones, depending on the application. Polyamide 11 (PA11 is a totally bio-based polyamide that can be reinforced with cellulosic fibers. Composites based on this polymer have demonstrated enough tensile strength, as well as stiffness, to replace GF-reinforced polypropylene (PP. However, flexural properties are of high interest for engineering applications. Due to the specific character of short-fiber-reinforced composites, significant differences are expected between the tensile and flexural properties. These differences encourage the study of the flexural properties of a material prior to the design or development of a new product. Despite the importance of the flexural strength, there are few works devoted to its study in the case of PA11-based composites. In this work, an in-depth study of the flexural strength of PA11 composites, reinforced with Stoneground wood (SGW from softwood, is presented. Additionally, the results are compared with those of PP-based composites. The results showed that the SGW fibers had lower strengthening capacity reinforcing PA11 than PP. Moreover, the flexural strength of PA11-SGW composites was similar to that of PP-GF composites.

  9. Zoning of the Russian Federation territory based on forest management and forest use intensity

    A. A. Маrtynyuk

    2016-02-01

    Full Text Available Over extended periods issues of forest management intensification are important in all aspects of Russian forest sector development. Sufficient research has been done in silviculture, forest planning and forest economics to address forest management intensification targets. Systems of our national territory forest management and forest economics zoning due to specifics of timber processing and forest area infrastructure have been developed. Despite sufficient available experience in sustainable forest management so far intensification issues were addressed due to development of new woodlands without proper consideration of forest regeneration and sustainable forest management operations. It resulted in forest resource depletion and unfavorable substitution of coniferous forests with less valuable softwood ones in considerable territories (especially accessible for transport. The situation is complicated since degree of forest ecosystem changes is higher in territories with high potential productivity. Ongoing changes combined with the present effective forest management system resulted in a situation where development of new woodlands is impossible without heavy investments in road construction; meanwhile road construction is unfeasible due to distances to timber processing facilities. In the meantime, changes in forest legislation, availability of forest lease holding, and promising post-logging forest regeneration technologies generate new opportunities to increase timber volumes due to application of other procedures practically excluding development of virgin woodlands. With regard to above, the Russian territory was zoned on a basis of key factors that define forest management and forest use intensification based on forest ecosystem potential productivity and area transport accessibility. Based on available data with GIS analysis approach (taking into consideration value of various factors the Russian Federation forest resources have been

  10. Assessing mechanical deconstruction of softwood cell wall for cellulosic biofuels production

    Jiang, Jinxue

    Mechanical deconstruction offers a promising strategy to overcome biomass recalcitrance for facilitating enzymatic hydrolysis of pretreated substrates with zero chemicals input and presence of inhibitors. The goal of this dissertation research is to gain a more fundamental understanding on the impact of mechanical pretreatment on generating digestible micronized-wood and how the physicochemical characteristics influence the subsequent enzymatic hydrolysis of micronized wood. The initial moisture content of feedstock was found to be the key factor affecting the development of physical features and enzymatic hydrolysis of micronized wood. Lower moisture content resulted in much rounder particles with lower crystallinity, while higher moisture content resulted in the milled particles with larger aspect ratio and crystallinity. The enzymatic hydrolysis of micronized wood was improved as collectively increasing surface area (i.e., reducing particle size and aspect ratio) and decreasing crystallinity during mechanical milling pretreatment. Energy efficiency analysis demonstrated that low-moisture content feedstock with multi-step milling process would contribute to cost-effectiveness of mechanical pretreatment for achieving more than 70% of total sugars conversion. In the early stage of mechanical pretreatment, the types of cell fractures were distinguished by the initial moisture contents of wood, leading to interwall fracture at the middle lamella region for low moisture content samples and intrawall fracture at the inner cell wall for high moisture content samples. The changes in cell wall fractures also resulted in difference in the distribution of surface chemical composition and energy required for milling process. In an effort to exploit the underlying mechanism associated with the reduced recalcitrance in micronized wood, we reported the increased enzymatic sugar yield and correspondingly structural and accessible properties of micronized feedstock. Electronic microscopy analysis detailed the structural alternation of cell wall during mechanical process, including cell fracture and delamination, ultrastructure disintegration, and cell wall fragments amorphization, as coincident with the particle size reduction. It was confirmed with Simons' staining that longer milling time resulted in increased substrate accessibility and porosity. The changes in cellulose molecular structure with respect to degree of polymerization (DP) and crystallinity index (CrI) also benefited to decreasing recalcitrance and facilitating enzymatic hydrolysis of micronized wood.

  11. 78 FR 77329 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order; Changes...

    2013-12-23

    ...); adds flexibility for the Board to nominate eligible persons to fill vacancies that occur during a term... operate (U.S. or import); add flexibility for the Board to nominate eligible persons to fill vacancies... and Border Protection. 2010 and 2011 U.S. data is from Forest Economic Advisors. It is noted that for...

  12. 76 FR 46185 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order

    2011-08-02

    ... data was compiled by Henry Spelter of Wood Futures Insight and Forest Economic Advisors. For 2008-2009... the Board indicating their desire to serve or nominating another industry member to serve on the Board... serve or to nominate another industry member to serve on the Board. Interested persons may also submit a...

  13. 78 FR 58956 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order; Changes...

    2013-09-25

    ... in any region in which they operate (U.S. or import); add flexibility for the Board to nominate... they operate (U.S. or import); add flexibility for the Board to nominate eligible persons to fill... and Border Protection. 2010 and 2011 U.S. data is from Forest Economic Advisors. It is noted that for...

  14. Competitiveness of U.S. wood furniture manufacturers - Lessons learned from the softwood moulding industry

    Al Schuler; Russ Taylor; Philip A. Araman

    2001-01-01

    The furniture industry in the United States has been losing market share to imports for the past two decades. This article focuses on the market segment where most of the loss has occurred: the important wood household (non-upholstered) sector (SIC code 2511). In the upholstered furniture sector, exports are still larger than imports. But the wood household furniture...

  15. Microscopic and Spectroscopic Characterisation of Waterlogged Archaeological Softwood from Anoxic Environments

    Pedersen, Nanna Bjerregaard

    waterlogged sites and solely decayed by erosion bacteria to refine the understanding of the residual wood structure left after degradation. This was done not only to improve the ability to develop suitable and cost effective conservations treatments but also to improve the understanding of anaerobic decay...... mechanisms acting on plant biomass in waterlogged anoxic environment.Morphological analyses showed typical erosion bacteria decay patterns in the residual wood structure. Decay resistance of some cell types and cell wall compartments in preference to others is most likely explained not only by elevated...

  16. PLYMAP : a computer simulation model of the rotary peeled softwood plywood manufacturing process

    Henry Spelter

    1990-01-01

    This report documents a simulation model of the plywood manufacturing process. Its purpose is to enable a user to make quick estimates of the economic impact of a particular process change within a mill. The program was designed to simulate the processing of plywood within a relatively simplified mill design. Within that limitation, however, it allows a wide range of...

  17. Stabilization of Softwood-Derived Pyrolysis Oils for Continuous Bio-oil Hydroprocessing

    Olarte, Mariefel V.; Zacher, Alan H.; Padmaperuma, Asanga B.; Burton, Sarah D.; Job, Heather M.; Lemmon, Teresa L.; Swita, Marie S.; Rotness, Leslie J.; Neuenschwander, Gary N.; Frye, John G.; Elliott, Douglas C.

    2015-10-15

    The use of fast pyrolysis as a potential renewable liquid transportation fuel alternative to crude oil depends on successful catalytic upgrading to produce a refinery-ready product with oxygen content and qualities (i.e. specific functional group or compound content) that is compatible with the product’s proposed insertion point. Catalytic upgrading of bio-oil requires high temperature and pressure, while similar to crude oil hydrotreating, is not as straightforward for the thermally unstable pyrolysis oil. For years, a two-temperature zone, downflow trickle bed reactor was the state-of-the art for continuous operation. However, pressure excursion due to plug formation still occurred, typically at the high temperature transition zone, leading to a process shutdown within 140 h. Recently, a bio-oil pre-treatment process, together with a robust commercial catalyst, was found to be enabling the continuous operation of the two-zone hydroprocessing system. Here, we report the results on pre-treating bio-oil at 413 K and 8.4 MPa of flowing H2 (500 L H2/L bio-oil, 0.5 L bio-oil/L catalyst bed) and the attempts to characterize this oil product to understand the chemistry which enabled the long-term processing of bio-oil.

  18. Spectroscopic analysis of hot-water- and dilute-acid-extracted hardwood and softwood chips

    Lehto, Joni; Louhelainen, Jarmo; Huttunen, Marko; Alén, Raimo

    2017-09-01

    Hot-water and dilute sulfuric acid pretreatments were performed prior to chemical pulping for silver/white birch (Betula pendula/B. pubescens) and Scots pine (Pinus sylvestris) chips to determine if varying pretreatment conditions on the original wood material were detectable via attenuated total reflectance (ATR) infrared spectroscopy. Pretreatment conditions varied with respect to temperature (130 °C and 150 °C) and treatment time (from 30 min to 120 min). The effects of the pretreatments on the composition of wood chips were determined by ATR infrared spectroscopy. The spectral data were compared to those determined by common wood chemistry analyses to evaluate the suitability of ATR spectroscopy method for rapid detection of changes in the wood chemical composition caused by different pretreatment conditions. In addition to determining wood species-dependent differences in the wood chemical composition, analytical results indicated that most essential lignin- and carbohydrates-related phenomena taking place during hot-water and acidic pretreatments could be described by applying this simple spectral method requiring only a small sample amount and sample preparation. Such information included, for example, the cleavage of essential lignin bonds (i.e., mainly β-O-4 linkages in guaiacyl and syringyl lignin) and formation of newly condensed lignin structures under different pretreatment conditions. Carbohydrate analyses indicated significant removal of hemicelluloses (especially hardwood xylan) and hemicelluloses-derived acetyl groups during the pretreatments, but they also confirmed the highly resistant nature of cellulose towards mild pretreatments.

  19. Acid bi-sulphite pulping effects on hardwoods and a softwood revealed by atomic force microscopy

    Chunilall, Viren

    2009-12-01

    Full Text Available Wood fibres are the raw material used in the production of dissolving pulp for the manufacture of cellulose derivatives such as viscose and cellulose acetate. At the microscopic level, the wood cell wall is organised in layers with different...

  20. Borate protection of softwood from Coptotermes acinaciformis (Isoptera: Rhinotermitidae) damage: variation in protection thresholds explained.

    Peters, Brenton C; Fitzgerald, Christopher J

    2006-10-01

    Laboratory and field data reported in the literature are confusing with regard to "adequate" protection thresholds for borate timber preservatives. The confusion is compounded by differences in termite species, timber species and test methodology. Laboratory data indicate a borate retention of 0.5% mass/mass (m/m) boric acid equivalent (BAE) would cause > 90% termite mortality and restrict mass loss in test specimens to 0.5% m/m BAE are required. We report two field experiments with varying amounts of untreated feeder material in which Coptotermes acinaciformis (Froggatt) (Isoptera: Rhinotermitidae) responses to borate-treated radiata (Monterey) pine, Pinus radiata D. Don, were measured. The apparently conflicting results between laboratory and field data are explained by the presence or absence of untreated feeder material in the test environment. In the absence of untreated feeder material, wood containing 0.5% BAE provided adequate protection from Coptotermes sp., whereas in the presence of untreated feeder material, increased retentions were required. Furthermore, the retentions required increased with increased amounts of susceptible material present. Some termites, Nasutitermes sp. and Mastotermes darwiniensis Froggatt, for example, are borate-tolerant and borate timber preservatives are not a viable management option with these species. The lack of uniform standards for termite test methodology and assessment criteria for efficacy across the world is recognized as a difficulty with research into the performance of timber preservatives with termites. The many variables in laboratory and field assays make "prescriptive" standards difficult to recommend. The use of "performance" standards to define efficacy criteria ("adequate" protection) is discussed.

  1. 75 FR 61001 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order

    2010-10-01

    ... lumber is used in products like flooring, siding and framing. The program would be financed by an... whether they favor implementation of the program prior to it going into effect. This rule also announces... Executive Order 12988, Civil Justice Reform. It is not intended to have retroactive effect. Section 524 of...

  2. Exploratory radio-frequency/vacuum drying of three B.C. coastal softwoods

    Avramidis, S.; Zwick, R.L.

    1992-01-01

    Five exploratory drying runs were carried out in a commercial size (23 m3) radio-frequency/vacuum (RF/V) kiln. The species investigated were Pacific Coast hemlock, Douglas-fir, and western redcedar of different sizes and grades. Evaluation of the dried lumber showed that the three species can be dried in very short times with a low amount of degrade with the exception of clear cedar, which exhibited severe internal honeycombing; indicating the need to develop proper kiln schedules for this drying process. The thermodynamic and sensitivity analyses performed showed that above certain efficiency levels, RF/V drying is economical and fast. This finding was particularly true with lumber thicknesses over 8 cm

  3. Numerical modelling of the time-dependent mechanical behaviour of softwood

    Engelund, Emil Tang

    2010-01-01

    When using wood as a structural material it is important to consider its time-dependent mechanical behaviour and to predict this behaviour for decades ahead. For this purpose, several rheological mathematical models, spanning from fairly simple to very complex ones, have been developed over...

  4. 78 FR 24152 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order; Request...

    2013-04-24

    ... at www.regulations.gov or sent to the Promotion and Economics Division, Fruit and Vegetable Program... assessments. The information collection requirements in the request are essential to carry out the intent of...

  5. Projecting housing starts and softwood lumber consumption in the United States

    Jeffrey P. Prestemon; David N. Wear; Karen L. Abt; Robert C. Abt

    2018-01-01

    New residential construction is a primary user of wood products in the United States; therefore, wood products projections require understanding the determinants of housing starts. We model quarterly US total, single-family, and multifamily housing starts with several model specifications, using data from 1979 to 2008, and evaluate their...

  6. Interactions between domestic and export markets for softwood lumber and plywood: tests of six hypotheses.

    David R. Darr

    1981-01-01

    Price formation in export markets and available data on export and domestic markets are discussed. The results of tests of several hypotheses about interactions between domestic and export markets are presented and interpreted from the standpoints of trade promotion and trade policy.

  7. Effect of hot water extracted hardwood and softwood chips on particleboard properties

    Manuel Raul Pelaez-Samaniego; Vikram Yadama; Tsai Garcia-Perez; Eini Lowell; Thomas Amidon

    2014-01-01

    The affinity of particleboard (PB) to water is one of the main limitations for using PB in moisture-rich environments. PB dimensional stability and durability can be improved by reducing the available hydroxyl groups in wood through hemicellulose removal, for example, by hot water extraction (HWE), which increases wood resistance to moisture uptake. The resulting...

  8. THE REACTIVITY OF PREHYDROLYZED SOFTWOOD KRAFT PULPS AFTER PROLONGED COOKING FOLLOWED BY CHLORITE DELIGNIFICATION

    Ulf Germgard; Muhammad Asif Javed

    2011-01-01

    In a laboratory study high-quality spruce chips were prehydrolyzed to remove hemicelluloses and then kraft cooked to different kappa numbers by varying the cooking time. Each pulp sample was then chlorite delignified to selectively remove the remaining lignin. The reactivities of the pulp samples before and after chlorite delignification were determined by Fock’s test, which is supposed to measure the pulp’s reactivity in the conventional viscose process. A number of analyses were carried out...

  9. Biorefinery lignosulfonates from sulfite-pretreated softwoods as dispersant for graphite

    Yanlin Qin; Lixuan Yu; Ruchun Wu; Dongjie Yang; Xueqing Qiu; Junyong Zhu

    2016-01-01

    Two biorefinery lignosulfonates (LSs), Ca-LS-DF and Na-LS-LP were, respectively, isolated from pilot-scale sulfite-pretreated spent liquor of lodgepole pine and fermentation residue of Douglas-fir harvest forest residue. The molecular weights of Na-LS-LP and Ca-LS-DF were approximately 9 000 and 11 000 Da, respectively. The two LSs were applied as dispersant for...

  10. Tensile strength characteristics of polypropylene composites reinforced with stone groundwood fibers from softwood

    López, Joan Pere; Méndez González, José Alberto; Espinach Orús, Xavier; Julián Pérez, Fernando; Mutjé Pujol, Pere; Vilaseca Morera, Fabiola

    2012-01-01

    The behavior of stone groundwood / polypropylene injection-molded composites was evaluated with and without coupling agent. Stone groundwood (SGW) is a fibrous material commonly prepared in a high yield process and mainly used for papermaking applications. In this work, the use of SGW fibers was explored as a reinforcing element of polypropylene (PP) composites. The surface charge density of the composite components was evaluated, as well as the fiber’s length and diameter inside the composit...

  11. Assessment of wood-inhabiting Basidiomycetes for biokraft pulping of softwood chips

    Wolfaardt, F

    2004-10-01

    Full Text Available Wood-inhabiting Basidiomycetes have been screened for various applications in the pulp and paper industry and it is evident that different fungi need to be used to suit the specific requirements of each application. This study assessed...

  12. 75 FR 52453 - Entry Requirements for Certain Softwood Lumber Products Exported From Any Country Into the United...

    2010-08-26

    ...)(3)(iii)(B)(3), which states that ``the exporter has paid, or committed to pay, all export charges..., to his best knowledge and belief, that the exporter has paid or committed to pay ``all export charges... discrepancies between the export permit date and the entry summary data. The commenter suggests using the...

  13. Comparative effect of mechanical beating and nanofibrillation of cellulose on paper properties made from bagasse and softwood pulps.

    Afra, Elyas; Yousefi, Hossein; Hadilam, Mohamad Mahdi; Nishino, Takashi

    2013-09-12

    Cellulose fibers were fibrillated using mechanical beating (shearing refiner) and ultra-fine friction grinder, respectively. The fibrillated fibers were then used to make paper. Mechanical beating process created a partial skin fibrillation, while grinding turned fiber from micro to nanoscale through nanofibrillation mechanism. The partially fibrillated and nano fibrillated fibers had significant effects on paper density, tear strength, tensile strength and water drainage time. The effect of nanofibrillation on paper properties was quantitatively higher than that of mechanical beating. Paper sheets from nanofibrillated cellulose have a higher density, higher tensile strength and lower tear strength compared to those subjected to mechanical beating. Mechanical beating and nanofibrillation were both found to be promising fiber structural modifications. Long water drainage time was an important drawback of both fibrillation methods. Copyright © 2013 Elsevier Ltd. All rights reserved.

  14. High-speed double-disc TMP [thermomechanical pulp] from northern and southern softwoods: One or two refining stages

    Sabourin, M.J. (Andritz Sprout-Bauer, Inc., Springfield, OH (United States)); Cort, J.B.; Musselman, R.L. (Andritz Sprout-Bauer, Inc., Muncy, PA (United States))

    1994-01-01

    Pilot-plant studies were carried out to evaluate one- and two-stage high-speed refining processes for production of thermomechanical pulp (TMP) at minimal energy consumption. Both northern (black spruce/balsam fir) and southern (lobolly pine) wood species were tested. Preliminary results indicate both one- and two-stage high-speed refining are suitable for the production of TMP from spruce and fir. Single-stage, high-speed refining of spruce/fir resulted in over 25% energy savings compared to conventional TMP production. The resulting TMP had improved optical and shive content properties, with slightly reduced pulp strength and long fiber content. Two stages of refining were necessary to optimize pulp quality from the lobolly pine furnish. A 15% energy reduction was obtained when comparing high-speed and conventional TMP pulping of lobolly pine at similar operating conditions. The high-speed pine TMP had comparable bonding strength, shive content, and lower tear than conventional two-stage lobolly pine TMP. 14 refs., 11 figs., 6 tabs.

  15. Shaping-lathe headrig will stretch shrinking timber supply

    J. Gengler; J.D. Saul

    1975-01-01

    The first commercial version of the shaping lathe headrig, designed to machine short hardwood or softwood logs into cants and flakes, was introduced to forest industry executives in September during a working demonstration at Stetson-Ross Machine Co., Seattle. Based on a concept provided by Dr. Peter Koch, chief wood scientist at the Southern Forest Experiment Station...

  16. Developing Inventory Projection Models Using Empirical Net Forest Growth and Growing-Stock Density Relationships Across U.S. Regions and Species Group

    Prakash Nepal; Peter J. Ince; Kenneth E. Skog; Sun J. Chang

    2012-01-01

    This paper describes a set of empirical net forest growth models based on forest growing-stock density relationships for three U.S. regions (North, South, and West) and two species groups (softwoods and hardwoods) at the regional aggregate level. The growth models accurately predict historical U.S. timber inventory trends when we incorporate historical timber harvests...

  17. Craftsmen say "we want edge-glued, standard-size panels"

    Philip A. Araman; Hugh W. Reynolds

    1983-01-01

    Wood craftsmen would like an alternative to hardwood lumber and plywood and softwood products. They are very interested in edge-glued, standard-size panels. These conclusions are based on interviews with craftsmen at two trade shows, and the results are included in this report along with our recommendations for optimum acceptance by craftsmen of this new product.

  18. Further Studies of Forest Structure Parameter Retrievals Using the Echidna® Ground-Based Lidar

    Strahler, A. H.; Yao, T.; Zhao, F.; Yang, X.; Schaaf, C.; Wang, Z.; Li, Z.; Woodcock, C. E.; Culvenor, D.; Jupp, D.; Newnham, G.; Lovell, J.

    2012-12-01

    Ongoing work with the Echidna® Validation Instrument (EVI), a full-waveform, ground-based scanning lidar (1064 nm) developed by Australia's CSIRO and deployed by Boston University in California conifers (2008) and New England hardwood and softwood (conifer) stands (2007, 2009, 2010), confirms the importance of slope correction in forest structural parameter retrieval; detects growth and disturbance over periods of 2-3 years; provides a new way to measure the between-crown clumping factor in leaf area index retrieval using lidar range; and retrieves foliage profiles with more lower-canopy detail than a large-footprint aircraft scanner (LVIS), while simulating LVIS foliage profiles accurately from a nadir viewpoint using a 3-D point cloud. Slope correction is important for accurate retrieval of forest canopy structural parameters, such as mean diameter at breast height (DBH), stem count density, basal area, and above-ground biomass. Topographic slope can induce errors in parameter retrievals because the horizontal plane of the instrument scan, which is used to identify, measure, and count tree trunks, will intersect trunks below breast height in the uphill direction and above breast height in the downhill direction. A test of three methods at southern Sierra Nevada conifer sites improved the range of correlations of these EVI-retrieved parameters with field measurements from 0.53-0.68 to 0.85-0.93 for the best method. EVI scans can detect change, including both growth and disturbance, in periods of two to three years. We revisited three New England forest sites scanned in 2007-2009 or 2007-2010. A shelterwood stand at the Howland Experimental Forest, Howland, Maine, showed increased mean DBH, above-ground biomass and leaf area index between 2007 and 2009. Two stands at the Harvard Forest, Petersham, Massachusetts, suffered reduced leaf area index and reduced stem count density as the result of an ice storm that damaged the stands. At one stand, broken tops were

  19. Lotus Base

    Mun, Terry; Bachmann, Asger; Gupta, Vikas

    2016-01-01

    exploration of Lotus genomic and transcriptomic data. Equally important are user-friendly in-browser tools designed for data visualization and interpretation. Here, we present Lotus Base, which opens to the research community a large, established LORE1 insertion mutant population containing an excess of 120...... such data, allowing users to construct, visualize, and annotate co-expression gene networks. Lotus Base takes advantage of modern advances in browser technology to deliver powerful data interpretation for biologists. Its modular construction and publicly available application programming interface enable...... developers to tap into the wealth of integrated Lotus data. Lotus Base is freely accessible at: https://lotus.au.dk....

  20. Touch BASE

    Antonella Del Rosso

    2015-01-01

    In a recent Nature article (see here), the BASE collaboration reported the most precise comparison of the charge-to-mass ratio of the proton to its antimatter equivalent, the antiproton. This result is just the beginning and many more challenges lie ahead.   CERN's AD Hall, where the BASE experiment is set-up. The Baryon Antibaryon Symmetry Experiment (BASE) was approved in June 2013 and was ready to take data in August 2014. During these 14 months, the BASE collaboration worked hard to set up its four cryogenic Penning traps, which are the heart of the whole experiment. As their name indicates, these magnetic devices are used to trap antiparticles – antiprotons coming from the Antiproton Decelerator – and particles of matter – negative hydrogen ions produced in the system by interaction with a degrader that slows the antiprotons down, allowing scientists to perform their measurements. “We had very little time to set up the wh...

  1. Defect characterization, diagnosis and repair of wood flooring based on a field survey

    Delgado, A.; Pereira, C.; Brito, J. de; Silvestre, J.D.

    2018-01-01

    A statistical characterization of defects in 35 buildings and 98 wood floorings (softwood and hardwood floors, and laminated and engineered wood floors), their diagnostic methods and repair solutions is presented. An expert system for inspecting wood flooring, comprising the classification of defects, their most probable causes, diagnostic methods and repair techniques, was used. Results include age, affected area, severity and frequency of defects and their main causes, as well as appropriate diagnostic methods, preventive and curative repair solutions most prescribed and the most significant correlations. Scratches were detected in more than five sixths of the sample, highly associated with exterior mechanical actions, and with an inadequate finishing layer. Wearing of the finishing layer was detected in a quarter of the inspected floorings. Accordingly, the application of a suitable finishing layer and, alternatively, its replacement are the most prescribed repair techniques. [es

  2. Fragmentation based

    Shashank Srivastava

    2014-01-01

    Gaining the understanding of mobile agent architecture and the security concerns, in this paper, we proposed a security protocol which addresses security with mitigated computational cost. The protocol is a combination of self decryption, co-operation and obfuscation technique. To circumvent the risk of malicious code execution in attacking environment, we have proposed fragmentation based encryption technique. Our encryption technique suits the general mobile agent size and provides hard and thorny obfuscation increasing attacker’s challenge on the same plane providing better performance with respect to computational cost as compared to existing AES encryption.

  3. Life-Cycle Energy and GHG Emissions for New and Recovered Softwood Framing Lumber and Hardwood Flooring Considering End-of-Life Scenarios

    Richard D. Bergman; Robert H. Falk; Hongmei Gu; Thomas R. Napier; Jamie Meil

    2013-01-01

    Within the green building fields is a growing movement to recover and reuse building materials in lieu of demolition and land fill disposal. However, they lack life-cycle data to help quantify environmental impacts. This study quantifies the primary energy and greenhouse gas (GHG) emissions released from the production of wood recovered from an old house and from new...

  4. Fractionation of high Kappa number kraft pulps of the South African softwoods and sulfonating of coarse fibre enriched fraction for production of sack paper

    Johakimu, Jonas K

    2011-03-01

    Full Text Available properties except tear strength: Tensile index (54%), TEA index (104%), Burst index (65%) and sheet density (23%). A tear index decrease (30%) could be attrib- uted to a high proportion of short and fine fibres in the accept stream. The reject stream... gave pulp samples with inferior strength properties with exception of tear strength. This may be due to high proportion of coarse fibres which have limited fibre collapsibility. Poor fibre collapsibility leads to a limited fibre bond- ing ability...

  5. Comparison of macromolecular interactions in the cell walls of hardwood, softwood and maize by fluorescence and FTIR spectroscopy, differential polarization laser scanning microscopy and X-ray diffraction

    Djikanović, D.; Devecerski, A.; Steinbach, Gabor; Simonović, J.; Matović, B.; Garab, G.; Kalauzi, A.; Radotić, K.

    2016-01-01

    Roč. 50, č. 3 (2016), s. 547-566 ISSN 0043-7719 Institutional support: RVO:61388971 Keywords : IR SPECTROSCOPY * CROSS-LINKING * CELLULOSE Subject RIV: EE - Microbiology, Virology Impact factor: 1.509, year: 2016

  6. Direct analysis by time-of-flight secondary ion mass spectrometry reveals action of bacterial laccase-mediator systems on both hardwood and softwood samples.

    Goacher, Robyn E; Braham, Erick J; Michienzi, Courtney L; Flick, Robert M; Yakunin, Alexander F; Master, Emma R

    2017-12-29

    The modification and degradation of lignin play a vital role in carbon cycling as well as production of biofuels and bioproducts. The possibility of using bacterial laccases for the oxidation of lignin offers a route to utilize existing industrial protein expression techniques. However, bacterial laccases are most frequently studied on small model compounds that do not capture the complexity of lignocellulosic materials. This work studied the action of laccases from Bacillus subtilis and Salmonella typhimurium (EC 1.10.3.2) on ground wood samples from yellow birch (Betula alleghaniensis) and red spruce (Picea rubens). The ability of bacterial laccases to modify wood can be facilitated by small molecule mediators. Herein, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS), gallic acid and sinapic acid mediators were tested. Direct analysis of the wood samples was achieved by time-of-flight secondary ion mass spectrometry (ToF-SIMS), a surface sensitive mass spectrometry technique that has characteristic peaks for H, G and S lignin. The action of the bacterial laccases on both wood samples was demonstrated and revealed a strong mediator influence. The ABTS mediator led to delignification, evident in an overall increase of polysaccharide peaks in the residual solid, along with equal loss of G and S-lignin peaks. The gallic acid mediator demonstrated minimal laccase activity. Meanwhile, the sinapic acid mediator altered the S/G peak ratio consistent with mediator attaching to the wood solids. The current investigation demonstrates the action of bacterial laccase-mediator systems directly on woody materials, and the potential of using ToF-SIMS to uncover the fundamental and applied role of bacterial enzymes in lignocellulose conversion. © 2017 Scandinavian Plant Physiology Society.

  7. Wood pellets, what else? : Greenhouse gas parity times of European electricity from wood pellets produced in the south-eastern United States using different softwood feedstocks

    Hanssen, Steef V.; Duden, Anna S.; Junginger, Martin; Dale, Virginia H.; van der Hilst, Floortje

    Several EU countries import wood pellets from the south-eastern United States. The imported wood pellets are (co-)fired in power plants with the aim of reducing overall greenhouse gas (GHG) emissions from electricity and meeting EU renewable energy targets. To assess whether GHG emissions are

  8. Selective nickel-catalyzed conversion of model and lignin-derived phenolic compounds to cyclohexanone-based polymer building blocks.

    Schutyser, Wouter; Van den Bosch, Sander; Dijkmans, Jan; Turner, Stuart; Meledina, Maria; Van Tendeloo, Gustaaf; Debecker, Damien P; Sels, Bert F

    2015-05-22

    Valorization of lignin is essential for the economics of future lignocellulosic biorefineries. Lignin is converted into novel polymer building blocks through four steps: catalytic hydroprocessing of softwood to form 4-alkylguaiacols, their conversion into 4-alkylcyclohexanols, followed by dehydrogenation to form cyclohexanones, and Baeyer-Villiger oxidation to give caprolactones. The formation of alkylated cyclohexanols is one of the most difficult steps in the series. A liquid-phase process in the presence of nickel on CeO2 or ZrO2 catalysts is demonstrated herein to give the highest cyclohexanol yields. The catalytic reaction with 4-alkylguaiacols follows two parallel pathways with comparable rates: 1) ring hydrogenation with the formation of the corresponding alkylated 2-methoxycyclohexanol, and 2) demethoxylation to form 4-alkylphenol. Although subsequent phenol to cyclohexanol conversion is fast, the rate is limited for the removal of the methoxy group from 2-methoxycyclohexanol. Overall, this last reaction is the rate-limiting step and requires a sufficient temperature (>250 °C) to overcome the energy barrier. Substrate reactivity (with respect to the type of alkyl chain) and details of the catalyst properties (nickel loading and nickel particle size) on the reaction rates are reported in detail for the Ni/CeO2 catalyst. The best Ni/CeO2 catalyst reaches 4-alkylcyclohexanol yields over 80 %, is even able to convert real softwood-derived guaiacol mixtures and can be reused in subsequent experiments. A proof of principle of the projected cascade conversion of lignocellulose feedstock entirely into caprolactone is demonstrated by using Cu/ZrO2 for the dehydrogenation step to produce the resultant cyclohexanones (≈80 %) and tin-containing beta zeolite to form 4-alkyl-ε-caprolactones in high yields, according to a Baeyer-Villiger-type oxidation with H2 O2 . © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Fuzzy knowledge bases integration based on ontology

    Ternovoy, Maksym; Shtogrina, Olena

    2012-01-01

    the paper describes the approach for fuzzy knowledge bases integration with the usage of ontology. This approach is based on metadata-base usage for integration of different knowledge bases with common ontology. The design process of metadata-base is described.

  10. Foundation: Transforming data bases into knowledge bases

    Purves, R. B.; Carnes, James R.; Cutts, Dannie E.

    1987-01-01

    One approach to transforming information stored in relational data bases into knowledge based representations and back again is described. This system, called Foundation, allows knowledge bases to take advantage of vast amounts of pre-existing data. A benefit of this approach is inspection, and even population, of data bases through an intelligent knowledge-based front-end.

  11. Nanocarbon materials obtained of coniferous trees in the composition of black powder

    Zulkhair Mansurov

    2012-03-01

    Full Text Available Obtained black powders from coniferous wood. The carbon content of up to 90% can be used in warfare, pyrotechnics and industries. In the Republic of Kazakhstan does not produce gunpowder. In the energy-intensive materials laboratory, developed industrial black powders (ordinary, composed of components produced in the republic of Kazakhstan. Sulfur, activated carbon, based on apricot seeds and rice husks, softwood sawdust, which have lower costs than their foreign counterparts.

  12. Modeling Prices for Sawtimber Stumpage in the South-Central United States

    Rajan Parajuli

    2016-07-01

    Full Text Available The South-Central United States, which includes the states of Louisiana, Mississippi, Texas, and Arkansas, represents an important segment of the softwood sawtimber market. By using the Seemingly Unrelated Regression (SUR method to account for the linkage among the four contiguous timber markets, this study examines the dynamics of softwood sawtimber stumpage markets within the region. Based on quarterly data from 1981 to 2014, the findings reveal that both pulpwood and chip-and-saw (CNS prices have a positive influence on the Texas and Arkansas sawtimber markets. Moreover, Granger-causality tests suggest that unidirectional causality runs from pulpwood and CNS markets to the respective sawtimber market. Compared to the pre-financial crisis period, sawtimber prices in these four states are 9%–17% lower in the recent years.

  13. Toward an Elasticity of Chip-N-Saw: Demand and Supply Models of Chip-N-Saw Stumpage in Louisiana

    Shaun M. Tanger

    2018-04-01

    Full Text Available Softwood chip-n-saw (CNS is a relatively new stumpage product in the sawtimber- and pulpwood-dominated stumpage markets in the U.S. South. Based on a quarterly data series from 2003 to 2016, this study estimates the demand and supply models of the softwood CNS stumpage market in Louisiana. The two-stage least squares (2SLS results reveal that own price elasticity of demand (PED is price elastic, and the cross-price elasticity (XEDwith sawtimber approaches unit elasticity. On the supply side, CNS is price inelastic in supply (PES, but more responsive to own price changesthan sawtimber quantity supplied. Further, severance tax increases are found to decrease the supply of CNS, indicating that suppliers are responsive to severance tax incidence. As the first empirical estimation of CNS, the findings should be of interest to those involved in the analysis of Southeastern stumpage markets.

  14. Paper based electronics platform

    Nassar, Joanna Mohammad; Sevilla, Galo Andres Torres; Hussain, Muhammad Mustafa

    2017-01-01

    A flexible and non-functionalized low cost paper-based electronic system platform fabricated from common paper, such as paper based sensors, and methods of producing paper based sensors, and methods of sensing using the paper based sensors

  15. Cost, energy use and GHG emissions for forest biomass harvesting operations

    Zhang, Fengli; Johnson, Dana M.; Wang, Jinjiang; Yu, Chunxia

    2016-01-01

    For forest-based biomass to become a significant contribution to the United States' energy portfolio, harvesting operations must be physically feasible and economically viable. An assessment of cost, energy and greenhouse gas (GHG) emissions of forest biomass harvesting was conducted. The assessment differentiates harvesting systems by cut-to-length and whole tree; harvest types of 30%, 70%, and 100% cut; and forest types of hardwoods, softwoods, mixed hardwood/softwood, and softwood plantations. Harvesting cost models were developed for economic assessment and life cycle energy and emission assessment was applied to calculate energy and emissions for different harvesting scenarios, considering material and energy inputs (machinery, diesel, etc.) and outputs (GHG emissions) for each harvesting process (felling, forwarding/skidding, etc.). The developed harvesting cost models and the life cycle energy and emission assessment method were applied in Michigan, U.S. using information collected from different sources. A sensitivity analysis was performed for selected input variables for the harvesting operations in order to explore their relative importance. The results indicated that productivity had the largest impact on harvesting cost followed by machinery purchase price, yearly scheduled hours, and expected utilization. Productivity and fuel use, as well as fuel factors, are the most influential environmental impacts of harvesting operations. - Highlights: • Life cycle energy and emissions for forest biomass harvesting operations. • Harvesting cost models were developed for economic assessment. • Productivity had the largest impact on harvesting cost. • Fuel use contributes the most emissions while lubricants contribute the least.

  16. Cross-laminated timber made of Hungarian raw materials

    Marko, G.; Bejo, L.; Takats, P.

    2016-04-01

    Cross-laminated timber (CLT), generally made out of softwood, enjoys increasing popularity throughout Europe. This material offers a versatile, eco-friendly technology to create strong, lightweight and energy-efficient buildings. Unfortunately, the sites and climatic conditions in Hungary are not suitable for growing high-quality coniferous trees. Transporting raw materials from other countries (sometimes thousands of kilometres away) negates the environmental advantages of wood-based construction. Local options are definitely preferable from an ecological aspect. Poplar wood (populus spp.) is of great economic importance in Hungary. There are several relatively high density, high strength varieties growing in large quantities in Hungary, that may be used as alternatives to softwood, with comparable properties. There is an increasing interest in using poplar as a construction material, especially in regions were there is a shortage of traditional construction timber. This paper presents the results of a preliminary investigation to create CLT using poplar lumber. Laboratory-scale CLT specimens were created in a hot press, and tested for their loadbearing capacity. The MOR values of poplar CLT are comparable to, albeit somewhat lowerthan those of softwood CLT. Further investigations are required to establish the economic viability and technological conditions for the commercial production of poplar CLT.

  17. Kraft lignin chain extension chemistry via propargylation, oxidative coupling, and Claisen rearrangement.

    Sen, Sanghamitra; Sadeghifar, Hasan; Argyropoulos, Dimitris S

    2013-10-14

    Despite its aromatic and polymeric nature, the heterogeneous, stochastic, and reactive characteristics of softwood kraft lignin seriously limit its potential for thermoplastic applications. Our continuing efforts toward creating thermoplastic lignin polymers are now focused at exploring propargylation derivatization chemistry and its potential as a versatile novel route for the eventual utilization of technical lignins with a significant amount of molecular control. To do this, we initially report the systematic propargylation of softwood kraft lignin. The synthesized derivatives were extensively characterized with thermal methods (DSC, TGA), (1)H, (13)C, and quantitative (31)P NMR and IR spectroscopies. Further on, we explore the versatile nature of the lignin pendant propargyl groups by demonstrating two distinct chain extension chemistries; the solution-based, copper-mediated, oxidative coupling and the thermally induced, solid-state, Claissen rearrangement polymerization chemistries. Overall, we show that it is possible to modulate the reactivity of softwood kraft lignin via a combination of methylation and chain extension providing a rational means for the creation of higher molecular weight polymers with the potential for thermoplastic materials and carbon fibers with the desired control of structure-property relations.

  18. GLOBAL JOURNAL OF AGRICULTURAL SCIENCES ISSN 1596-2903

    Ada Global

    semi-hardwood and softwood) of the stem cuttings of G. latifolia in relation to ... second week after planting even though softwood cuttings started earlier showed the importance of carbohydrate ..... women in the University of Nigeria, Nsukka.

  19. The physics data base

    Gault, F.D.

    1984-01-01

    The physics data base is introduced along with its associated data base management system. The emphasis is on data and their use and a classification of data and of data bases is developed to distinguish compilation organizations. The characteristics of these organizations are examined briefly and the long term consequences of the physics data base discussed. (orig.)

  20. Solid Base Catalysis

    Ono, Yoshio

    2011-01-01

    The importance of solid base catalysts has come to be recognized for their environmentally benign qualities, and much significant progress has been made over the past two decades in catalytic materials and solid base-catalyzed reactions. The book is focused on the solid base. Because of the advantages over liquid bases, the use of solid base catalysts in organic synthesis is expanding. Solid bases are easier to dispose than liquid bases, separation and recovery of products, catalysts and solvents are less difficult, and they are non-corrosive. Furthermore, base-catalyzed reactions can be performed without using solvents and even in the gas phase, opening up more possibilities for discovering novel reaction systems. Using numerous examples, the present volume describes the remarkable role solid base catalysis can play, given the ever increasing worldwide importance of "green" chemistry. The reader will obtain an overall view of solid base catalysis and gain insight into the versatility of the reactions to whic...

  1. Characterization of Lignocellulosic Biomass as Raw Material for the Production of Porous Carbon-based Materials

    Saptadi Darmawan

    2016-02-01

    Full Text Available Lignocellulosic biomass is a potential raw material that can be used in the synthesis (manufacture of porous carbon stuffs. The properties of such porous carbon products are affected by the species of the raw material and the manufacturing process, among other things. This paper scrutinizes the related characteristics of lignocellulosic raw materials that indicate potential for the production of porous carbon. Three species were used: pine (Pinus merkusii wood, mangium (Acacia mangium wood, and candlenut (Aleurites moluccana shells, representing softwoods, hardwoods, and non-wood stuffs, respectively. Analyses of their chemical compounds and proximate contents were carried out. Additionally, nano scale scrutiny of the lignocellulosic biomass was also conducted using the nano capable instruments, which consisted of SEM, EDS, XRD, FTIR, and DSC. Results revealed that pine wood had the most potential to produce porous carbon. Morphologically, pine wood afforded the best permeability, whereby at the structure of monoclinic cellulose crystals, there were cellulose-I(alpha structures, which contained less cellulose-I(beta structures. Furthermore, pine wood exhibited greater volatile matter content, as confirmed through the FTIR, which greatly assisted the forming of porosity inside its corresponding carbon.

  2. Possible Demands for Eastern Hardwoods Resulting from Harvest Restrictions in the Pacific

    Janice K. Wiedenbeck; Philip A. Araman

    1993-01-01

    Efforts to conserve the habitat of the northern spotted owl in the Pacific Northwest have placed softwood timber supplies under a great deal of pressure and driven up the price of softwood lumber. Hardwoods could meet some of the demand for products that have previously been manufactured from softwood species. Hardwood structural lumber may soon become an economically...

  3. Beyond Zero Based Budgeting.

    Ogden, Daniel M., Jr.

    1978-01-01

    Suggests that the most practical budgeting system for most managers is a formalized combination of incremental and zero-based analysis because little can be learned about most programs from an annual zero-based budget. (Author/IRT)

  4. VectorBase

    U.S. Department of Health & Human Services — VectorBase is a Bioinformatics Resource Center for invertebrate vectors. It is one of four Bioinformatics Resource Centers funded by NIAID to provide web-based...

  5. Mobile Inquiry Based Learning

    Specht, Marcus

    2012-01-01

    Specht, M. (2012, 8 November). Mobile Inquiry Based Learning. Presentation given at the Workshop "Mobile inquiry-based learning" at the Mobile Learning Day 2012 at the Fernuniversität Hagen, Hagen, Germany.

  6. Microbead agglutination based assays

    Kodzius, Rimantas; Castro, David; Foulds, Ian G.; Parameswaran, Ash M.; Sumanpreet, K. Chhina

    2013-01-01

    We report a simple and rapid room temperature assay for point-of-care (POC) testing that is based on specific agglutination. Agglutination tests are based on aggregation of microbeads in the presence of a specific analyte thus enabling

  7. Carbon Based Nanotechnology: Review

    Srivastava, Deepak; Saini, Subhash (Technical Monitor)

    1999-01-01

    This presentation reviews publicly available information related to carbon based nanotechnology. Topics covered include nanomechanics, carbon based electronics, nanodevice/materials applications, nanotube motors, nano-lithography and H2O storage in nanotubes.

  8. The ground based plan

    1989-01-01

    The paper presents a report of ''The Ground Based Plan'' of the United Kingdom Science and Engineering Research Council. The ground based plan is a plan for research in astronomy and planetary science by ground based techniques. The contents of the report contains a description of:- the scientific objectives and technical requirements (the basis for the Plan), the present organisation and funding for the ground based programme, the Plan, the main scientific features and the further objectives of the Plan. (U.K.)

  9. Stolen Base Physics

    Kagan, David

    2013-01-01

    Few plays in baseball are as consistently close and exciting as the stolen base. While there are several studies of sprinting, the art of base stealing is much more nuanced. This article describes the motion of the base-stealing runner using a very basic kinematic model. The model will be compared to some data from a Major League game. The…

  10. Convergent Filter Bases

    Coghetto Roland

    2015-09-01

    Full Text Available We are inspired by the work of Henri Cartan [16], Bourbaki [10] (TG. I Filtres and Claude Wagschal [34]. We define the base of filter, image filter, convergent filter bases, limit filter and the filter base of tails (fr: filtre des sections.

  11. Cholinesterase-based biosensors.

    Štěpánková, Šárka; Vorčáková, Katarína

    2016-01-01

    Recently, cholinesterase-based biosensors are widely used for assaying anticholinergic compounds. Primarily biosensors based on enzyme inhibition are useful analytical tools for fast screening of inhibitors, such as organophosphates and carbamates. The present review is aimed at compilation of the most important facts about cholinesterase based biosensors, types of physico-chemical transduction, immobilization strategies and practical applications.

  12. ARAC terrain data base

    Walker, H.

    1982-11-01

    A terrain data base covering the continental United States at 500-meter resolution has been generated. Its function is to provide terrain data for input to mesoscale atmospheric models that are used as part of the Atmospheric Release Advisory Capability at Lawrence Livermore Laboratory (LLNL). The structure of the data base as it exists on the LLNL computer system is described. The data base has been written to tapes for transfer to other systems and the format of these tapes is also described

  13. Base Station Performance Model

    Walsh, Barbara; Farrell, Ronan

    2005-01-01

    At present the testing of power amplifiers within base station transmitters is limited to testing at component level as opposed to testing at the system level. While the detection of catastrophic failure is possible, that of performance degradation is not. This paper proposes a base station model with respect to transmitter output power with the aim of introducing system level monitoring of the power amplifier behaviour within the base station. Our model reflects the expe...

  14. Value-based pricing

    Netseva-Porcheva Tatyana

    2010-01-01

    The main aim of the paper is to present the value-based pricing. Therefore, the comparison between two approaches of pricing is made - cost-based pricing and value-based pricing. The 'Price sensitively meter' is presented. The other topic of the paper is the perceived value - meaning of the perceived value, the components of perceived value, the determination of perceived value and the increasing of perceived value. In addition, the best company strategies in matrix 'value-cost' are outlined. .

  15. Network-Based Effectiveness

    Friman, Henrik

    2006-01-01

    ...) to increase competitive advantage, innovation, and mission effectiveness. Network-based effectiveness occurs due to the influence of various factors such as people, procedures, technology, and organizations...

  16. Case-based reasoning

    Kolodner, Janet

    1993-01-01

    Case-based reasoning is one of the fastest growing areas in the field of knowledge-based systems and this book, authored by a leader in the field, is the first comprehensive text on the subject. Case-based reasoning systems are systems that store information about situations in their memory. As new problems arise, similar situations are searched out to help solve these problems. Problems are understood and inferences are made by finding the closest cases in memory, comparing and contrasting the problem with those cases, making inferences based on those comparisons, and asking questions whe

  17. Strengths-based Learning

    Ledertoug, Mette Marie

    -being. The Ph.D.-project in Strength-based learning took place in a Danish school with 750 pupils age 6-16 and a similar school was functioning as a control group. The presentation will focus on both the aware-explore-apply processes and the practical implications for the schools involved, and on measurable......Strength-based learning - Children͛s Character Strengths as Means to their Learning Potential͛ is a Ph.D.-project aiming to create a strength-based mindset in school settings and at the same time introducing strength-based interventions as specific tools to improve both learning and well...

  18. Monitoring Knowledge Base (MKB)

    U.S. Environmental Protection Agency — The Monitoring Knowledge Base (MKB) is a compilation of emissions measurement and monitoring techniques associated with air pollution control devices, industrial...

  19. Imagery Data Base Facility

    Federal Laboratory Consortium — The Imagery Data Base Facility supports AFRL and other government organizations by providing imagery interpretation and analysis to users for data selection, imagery...

  20. Game-Based Teaching

    Hanghøj, Thorkild

    2013-01-01

    This chapter outlines theoretical and empirical perspectives on how Game-Based Teaching can be integrated within the context of formal schooling. Initially, this is done by describing game scenarios as models for possible actions that need to be translated into curricular knowledge practices...... approaches to game-based teaching, which may or may not correspond with the pedagogical models of particular games....

  1. Secure base stations

    Bosch, Peter; Brusilovsky, Alec; McLellan, Rae; Mullender, Sape J.; Polakos, Paul

    2009-01-01

    With the introduction of the third generation (3G) Universal Mobile Telecommunications System (UMTS) base station router (BSR) and fourth generation (4G) base stations, such as the 3rd Generation Partnership Project (3GPP) Long Term Evolution (LTE) Evolved Node B (eNB), it has become important to

  2. Hydrogel based occlusion systems

    Stam, F.A.; Jackson, N.; Dubruel, P.; Adesanya, K.; Embrechts, A.; Mendes, E.; Neves, H.P.; Herijgers, P.; Verbrugghe, Y.; Shacham, Y.; Engel, L.; Krylov, V.

    2013-01-01

    A hydrogel based occlusion system, a method for occluding vessels, appendages or aneurysms, and a method for hydrogel synthesis are disclosed. The hydrogel based occlusion system includes a hydrogel having a shrunken and a swollen state and a delivery tool configured to deliver the hydrogel to a

  3. Diffusion Based Photon Mapping

    Schjøth, Lars; Fogh Olsen, Ole; Sporring, Jon

    2007-01-01

    . To address this problem we introduce a novel photon mapping algorithm based on nonlinear anisotropic diffusion. Our algorithm adapts according to the structure of the photon map such that smoothing occurs along edges and structures and not across. In this way we preserve the important illumination features......, while eliminating noise. We call our method diffusion based photon mapping....

  4. Diffusion Based Photon Mapping

    Schjøth, Lars; Olsen, Ole Fogh; Sporring, Jon

    2006-01-01

    . To address this problem we introduce a novel photon mapping algorithm based on nonlinear anisotropic diffusion. Our algorithm adapts according to the structure of the photon map such that smoothing occurs along edges and structures and not across. In this way we preserve the important illumination features......, while eliminating noise. We call our method diffusion based photon mapping....

  5. Zero-Based Budgeting.

    Wichowski, Chester

    1979-01-01

    The zero-based budgeting approach is designed to achieve the greatest benefit with the fewest undesirable consequences. Seven basic steps make up the zero-based decision-making process: (1) identifying program goals, (2) classifying goals, (3) identifying resources, (4) reviewing consequences, (5) developing decision packages, (6) implementing a…

  6. Office-based anaesthesia

    infection, and consistency in nursing personnel. In the USA 17 -. 24% of all elective ambulatory surgery is ... knowledge base or personality to deal with the OBA environment. Compared with hospitals, office-based facilities currently ... disease or major cardiovascular risk factors). Intravenous access via a flexible cannula is.

  7. Knowledge base mechanisms

    Suwa, M; Furukawa, K; Makinouchi, A; Mizoguchi, T; Mizoguchi, F; Yamasaki, H

    1982-01-01

    One of the principal goals of the Fifth Generation Computer System Project for the coming decade is to develop a methodology for building knowledge information processing systems which will provide people with intelligent agents. The key notion of the fifth generation computer system is knowledge used for problem solving. In this paper the authors describe the plan of Randd on knowledge base mechanisms. A knowledge representation system is to be designed to support knowledge acquisition for the knowledge information processing systems. The system will include a knowledge representation language, a knowledge base editor and a debugger. It is also expected to perform as a kind of meta-inference system. In order to develop the large scale knowledge base systems, a knowledge base mechanism based on the relational model is to be studied in the earlier stage of the project. Distributed problem solving is also one of the main issues of the project. 19 references.

  8. Skull base tumours

    Borges, Alexandra [Instituto Portugues de Oncologia Francisco Gentil, Servico de Radiologia, Rua Professor Lima Basto, 1093 Lisboa Codex (Portugal)], E-mail: borgesalexandra@clix.pt

    2008-06-15

    With the advances of cross-sectional imaging radiologists gained an increasing responsibility in the management of patients with skull base pathology. As this anatomic area is hidden to clinical exam, surgeons and radiation oncologists have to rely on imaging studies to plan the most adequate treatment. To fulfil these endeavour radiologists need to be knowledgeable about skull base anatomy, about the main treatment options available, their indications and contra-indications and needs to be aware of the wide gamut of pathologies seen in this anatomic region. This article will provide a radiologists' friendly approach to the central skull base and will review the most common central skull base tumours and tumours intrinsic to the bony skull base.

  9. Evidence-based radiography

    Hafslund, Bjorg; Clare, Judith; Graverholt, Birgitte; Wammen Nortvedt, Monica

    2008-01-01

    Evidence-based practice (EBP) offers the integration of the best research evidence with clinical knowledge and expertise and patient values. EBP is a well known term in health care. This paper discusses the implementation of EBP into radiography and introduces the term evidence-based radiography. Evidence-based radiography is radiography informed and based on the combination of clinical expertise and the best available research-based evidence, patient preferences and resources available. In Norway, EBP in radiography is being debated and radiographers are discussing the challenges of implementing EBP in both academic and clinical practice. This discussion paper explains why EBP needs to be a basis for a radiography curriculum and a part of radiographers' practice. We argue that Norwegian radiographers must increase participation in research and developing practice within their specific radiographic domain

  10. Skull base tumours

    Borges, Alexandra

    2008-01-01

    With the advances of cross-sectional imaging radiologists gained an increasing responsibility in the management of patients with skull base pathology. As this anatomic area is hidden to clinical exam, surgeons and radiation oncologists have to rely on imaging studies to plan the most adequate treatment. To fulfil these endeavour radiologists need to be knowledgeable about skull base anatomy, about the main treatment options available, their indications and contra-indications and needs to be aware of the wide gamut of pathologies seen in this anatomic region. This article will provide a radiologists' friendly approach to the central skull base and will review the most common central skull base tumours and tumours intrinsic to the bony skull base

  11. Design-Based Research

    Gynther, Karsten; Christensen, Ove; Petersen, Trine Brun

    2012-01-01

    I denne artikel introduceres Design Based Research for første gang på dansk i et videnskabeligt tidsskrift. Artiklen præsenterer de grundlæggende antagelser, som ligger til grund for Design Based Research-traditionen, og artiklen diskuterer de principper, som ligger til grund for gennemførelse af...... et DBR-forskningsprojekt. Med udgangspunkt i forsknings- og udviklingsprojektet ELYK: E-læring, Yderområder og Klyngedannelse, præsenteres den innovationsmodel, som projektet har udviklet med udgangspunkt i Design Based Research traditionen. ELYKs DBR innovationsmodel har vist sig effektiv i forhold...

  12. Nature-based integration

    Pitkänen, Kati; Oratuomi, Joose; Hellgren, Daniela

    Increased attention to, and careful planning of the integration of migrants into Nordic societies is ever more important. Nature based integration is a new solution to respond to this need. This report presents the results of a Nordic survey and workshop and illustrates current practices of nature...... based integration by case study descriptions from Denmark, Sweden Norway and Finland. Across Nordic countries several practical projects and initiatives have been launched to promote the benefits of nature in integration and there is also growing academic interest in the topic. Nordic countries have...... the potential of becoming real forerunners in nature based integration even at the global scale....

  13. Data base management study

    1976-01-01

    Data base management techniques and applicable equipment are described. Recommendations which will assist potential NASA data users in selecting and using appropriate data base management tools and techniques are presented. Classes of currently available data processing equipment ranging from basic terminals to large minicomputer systems were surveyed as they apply to the needs of potential SEASAT data users. Cost and capabilities projections for this equipment through 1985 were presented. A test of a typical data base management system was described, as well as the results of this test and recommendations to assist potential users in determining when such a system is appropriate for their needs. The representative system tested was UNIVAC's DMS 1100.

  14. Value-based pricing

    Netseva-Porcheva Tatyana

    2010-01-01

    Full Text Available The main aim of the paper is to present the value-based pricing. Therefore, the comparison between two approaches of pricing is made - cost-based pricing and value-based pricing. The 'Price sensitively meter' is presented. The other topic of the paper is the perceived value - meaning of the perceived value, the components of perceived value, the determination of perceived value and the increasing of perceived value. In addition, the best company strategies in matrix 'value-cost' are outlined. .

  15. QuickBase

    Conner, Nancy

    2007-01-01

    Ready to put Intuit's QuickBase to work? Our new Missing Manual shows you how to capture, modify, share, and manage data and documents with this web-based data-sharing program quickly and easily. No longer do you have to coordinate your team through a blizzard of emails or play frustrating games of "guess which document is the right one."QuickBase saves your organization time and money, letting you manage and share the information that makes your business tick: sales figures, project timelines, drafts of documents, purchase or work requests--whatever information you need to keep business flowi

  16. Water sorption in wood and modified wood at high values of relative humidity

    Engelund, Emil Tang; Thygesen, Lisbeth Garbrecht; Hoffmeyer, Preben

    2010-01-01

    A theoretical study of the amount of moisture held in wood as capillary condensed water in the relative humidity (RH) range of 90–99.9% is carried out. The study is based on idealized geometries of the softwood structure related to micrographs. It is confined to structural elements such as bordered......, and different degrees of pit aspiration are assigned to earlywood and latewood. We suggest based on the results that capillary condensation makes only a very small contribution to the equilibrium moisture content. At 99.9% RH the contribution amounts to less than 0.0035 kg water per kg dry wood. This is in line...

  17. Cheboygan Vessel Base

    Federal Laboratory Consortium — Cheboygan Vessel Base (CVB), located in Cheboygan, Michigan, is a field station of the USGS Great Lakes Science Center (GLSC). CVB was established by congressional...

  18. Hanscom Air Force Base

    Federal Laboratory Consortium — MIT Lincoln Laboratory occupies 75 acres (20 acres of which are MIT property) on the eastern perimeter of Hanscom Air Force Base, which is at the nexus of Lexington,...

  19. Network-Based Effectiveness

    Friman, Henrik

    2006-01-01

    ... (extended from Leavitt, 1965). This text identifies aspects of network-based effectiveness that can benefit from a better understanding of leadership and management development of people, procedures, technology, and organizations...

  20. WormBase

    U.S. Department of Health & Human Services — WormBase is an international consortium of biologists and computer scientists dedicated to providing the research community with accurate, current, accessible...

  1. Kelomehele preemia Baseli festivalil

    2000-01-01

    Baselis festivalil "VIPER - International Festival for Film Video and New Media" tunnistati parimaks CD-ROMiks Gustav Deutschi/Anna Schimeki "Odysee today", netiprojektiks itaallaste "01.ORG", äramärkimispreemia - Raivo Kelomehe "Videoweaver"

  2. Risk based modelling

    Chapman, O.J.V.; Baker, A.E.

    1993-01-01

    Risk based analysis is a tool becoming available to both engineers and managers to aid decision making concerning plant matters such as In-Service Inspection (ISI). In order to develop a risk based method, some form of Structural Reliability Risk Assessment (SRRA) needs to be performed to provide a probability of failure ranking for all sites around the plant. A Probabilistic Risk Assessment (PRA) can then be carried out to combine these possible events with the capability of plant safety systems and procedures, to establish the consequences of failure for the sites. In this way the probability of failures are converted into a risk based ranking which can be used to assist the process of deciding which sites should be included in an ISI programme. This paper reviews the technique and typical results of a risk based ranking assessment carried out for nuclear power plant pipework. (author)

  3. Problem Based Learning

    de Graaff, Erik; Guerra, Aida

    , the key principles remain the same everywhere. Graaff & Kolmos (2003) identify the main PBL principles as follows: 1. Problem orientation 2. Project organization through teams or group work 3. Participant-directed 4. Experiental learning 5. Activity-based learning 6. Interdisciplinary learning and 7...... model and in general problem based and project based learning. We apply the principle of teach as you preach. The poster aims to outline the visitors’ workshop programme showing the results of some recent evaluations.......Problem-Based Learning (PBL) is an innovative method to organize the learning process in such a way that the students actively engage in finding answers by themselves. During the past 40 years PBL has evolved and diversified resulting in a multitude in variations in models and practices. However...

  4. Biomimetics: nature based innovation

    Bar-Cohen, Yoseph

    2012-01-01

    "Based on the concept that nature offers numerous sources of inspiration for inventions related to mechanisms, materials, processes, and algorithms, this book covers the topic of biomimetics and the inspired innovation...

  5. BaseMap

    California Natural Resource Agency — The goal of this project is to provide a convenient base map that can be used as a starting point for CA projects. It's simple, but designed to work at a number of...

  6. PHENANTHROLINE TEMPLATED SCHIFF BASE

    DNA in intercalative mode and in the development of unique chemotherapeutics where they impact on the ... between base pairs of DNA. .... h, i, j, k belong to fragmentation products of impap. ..... Sm(III) complex and herring sperm DNA. Bull.

  7. Lunar resource base

    Pulley, John; Wise, Todd K.; Roy, Claude; Richter, Phil

    A lunar base that exploits local resources to enhance the productivity of a total SEI scenario is discussed. The goals were to emphasize lunar science and to land men on Mars in 2016 using significant amounts of lunar resources. It was assumed that propulsion was chemical and the surface power was non-nuclear. Three phases of the base build-up are outlined, the robotic emplacement of the first elements is detailed and a discussion of future options is included.

  8. Participatory design based research

    Dau, Susanne; Bach Jensen, Louise; Falk, Lars

    This poster reveal how participatory design based research by the use of a CoED inspired creative process can be used for designing solutions to problems regarding students study activities outside campus.......This poster reveal how participatory design based research by the use of a CoED inspired creative process can be used for designing solutions to problems regarding students study activities outside campus....

  9. Maintaining Relationship Based Procurement

    Davis, Peter

    2012-01-01

    Alliance and relationship projects are increasingin number and represent a large pool of work. Tobe successful relationship style contracts dependon soft-dollar factors, particularly the participants'ability to work together within an agreedframework, generally they are not based on lowbid tendering. Participants should be prepared todo business in an open environment based ontrust and mutually agreed governance. Theresearch evaluates relationship maintenance inthe implementation phase of con...

  10. Game-based telerehabilitation.

    Lange, B; Flynn, Sheryl M; Rizzo, A A

    2009-03-01

    This article summarizes the recent accomplishments and current challenges facing game-based virtual reality (VR) telerehabilitation. Specifically this article addresses accomplishments relative to realistic practice scenarios, part to whole practice, objective measurement of performance and progress, motivation, low cost, interaction devices and game design. Furthermore, a description of the current challenges facing game based telerehabilitation including the packaging, internet capabilities and access, data management, technical support, privacy protection, seizures, distance trials, scientific scrutiny and support from insurance companies.

  11. REST based mobile applications

    Rambow, Mark; Preuss, Thomas; Berdux, Jörg; Conrad, Marc

    2008-02-01

    Simplicity is the major advantage of REST based webservices. Whereas SOAP is widespread in complex, security sensitive business-to-business aplications, REST is widely used for mashups and end-user centric applicatons. In that context we give an overview of REST and compare it to SOAP. Furthermore we apply the GeoDrawing application as an example for REST based mobile applications and emphasize on pros and cons for the use of REST in mobile application scenarios.

  12. Swarm-based medicine.

    Putora, Paul Martin; Oldenburg, Jan

    2013-09-19

    Occasionally, medical decisions have to be taken in the absence of evidence-based guidelines. Other sources can be drawn upon to fill in the gaps, including experience and intuition. Authorities or experts, with their knowledge and experience, may provide further input--known as "eminence-based medicine". Due to the Internet and digital media, interactions among physicians now take place at a higher rate than ever before. With the rising number of interconnected individuals and their communication capabilities, the medical community is obtaining the properties of a swarm. The way individual physicians act depends on other physicians; medical societies act based on their members. Swarm behavior might facilitate the generation and distribution of knowledge as an unconscious process. As such, "swarm-based medicine" may add a further source of information to the classical approaches of evidence- and eminence-based medicine. How to integrate swarm-based medicine into practice is left to the individual physician, but even this decision will be influenced by the swarm.

  13. Evidence-Based Toxicology.

    Hoffmann, Sebastian; Hartung, Thomas; Stephens, Martin

    Evidence-based toxicology (EBT) was introduced independently by two groups in 2005, in the context of toxicological risk assessment and causation as well as based on parallels between the evaluation of test methods in toxicology and evidence-based assessment of diagnostics tests in medicine. The role model of evidence-based medicine (EBM) motivated both proposals and guided the evolution of EBT, whereas especially systematic reviews and evidence quality assessment attract considerable attention in toxicology.Regarding test assessment, in the search of solutions for various problems related to validation, such as the imperfectness of the reference standard or the challenge to comprehensively evaluate tests, the field of Diagnostic Test Assessment (DTA) was identified as a potential resource. DTA being an EBM discipline, test method assessment/validation therefore became one of the main drivers spurring the development of EBT.In the context of pathway-based toxicology, EBT approaches, given their objectivity, transparency and consistency, have been proposed to be used for carrying out a (retrospective) mechanistic validation.In summary, implementation of more evidence-based approaches may provide the tools necessary to adapt the assessment/validation of toxicological test methods and testing strategies to face the challenges of toxicology in the twenty first century.

  14. LDEF materials data bases

    Funk, Joan G.; Strickland, John W.; Davis, John M.

    1993-01-01

    The Long Duration Exposure Facility (LDEF) and the accompanying experiments were composed of and contained a wide variety of materials representing the largest collection of materials flown in low Earth orbit (LEO) and retrieved for ground based analysis to date. The results and implications of the mechanical, thermal, optical, and electrical data from these materials are the foundation on which future LEO space missions will be built. The LDEF Materials Special Investigation Group (MSIG) has been charged with establishing and developing data bases to document these materials and their performance to assure not only that the data are archived for future generations but also that the data are available to the spacecraft user community in an easily accessed, user-friendly form. This paper discusses the format and content of the three data bases developed or being developed to accomplish this task. The hardware and software requirements for each of these three data bases are discussed along with current availability of the data bases. This paper also serves as a user's guide to the MAPTIS LDEF Materials Data Base.

  15. Safety analysis report: packages. LP-50 tritium package (packaging of fissile and other radioactive materials). Final report

    Gates, A.A.; McCarthy, P.G.; Edl, J.W.

    1975-04-01

    Elemental tritium is shipped at low pressure in a stainless steel container (LP-50) sealed within an aluminum vessel and surrounded by a minimum of 4-in. thick Celotex insulation in a steel drum. The structural, thermal, containment, shielding, and criticality safety aspects of this package are evaluated. Procedures for loading and unloading, empty cask transport, acceptance testing and maintenance, and quality assurance requirements for the LP-50 package are described in detail. (U.S.)

  16. Safety analysis report; packages LP-50 tritium package. (Packaging of fissile and other radioactive materials). Final report

    Gates, A.A.; McCarthy, P.G.; Edl, J.W.; Chalfant, G.G.

    1975-05-01

    Elemental tritium is shipped at low pressure in a stainless steel container (LP-50) surrounded by an aluminum vessel and Celotex insulation at least 4 in. thick in a steel drum. The total weight of the package is 260 lbs maximum. The various components that constitute the package are described and are shown in 7 figures. The safety analysis includes: structural evaluations; thermal evaluations; containment; operating procedures; acceptance tests and maintenance program; and design review

  17. Safety analysis report: packages. LP-12 tritium package (packaging of fissile and other radioactive materials). Final report

    Gates, A.A.; McCarthy, P.G.; Edl, J.W.

    1975-05-01

    Elemental tritium is shipped at low pressure in a stainless steel container (LP-12) within an aluminum vessel and surrounded by 3.9 in.-thick Celotex insulation in a steel drum. Information is presented on the packaging design, evaluation of the structural, thermal, containment, shielding, and criticality characteristics of the package, procedures for loading, unloading, transporting, and testing the LP-12, and quality assurance requirements. (U.S.)

  18. Paper based electronics platform

    Nassar, Joanna Mohammad

    2017-07-20

    A flexible and non-functionalized low cost paper-based electronic system platform fabricated from common paper, such as paper based sensors, and methods of producing paper based sensors, and methods of sensing using the paper based sensors are provided. A method of producing a paper based sensor can include the steps of: a) providing a conventional paper product to serve as a substrate for the sensor or as an active material for the sensor or both, the paper product not further treated or functionalized; and b) applying a sensing element to the paper substrate, the sensing element selected from the group consisting of a conductive material, the conductive material providing contacts and interconnects, sensitive material film that exhibits sensitivity to pH levels, a compressible and/or porous material disposed between a pair of opposed conductive elements, or a combination of two of more said sensing elements. The method of sensing can further include measuring, using the sensing element, a change in resistance, a change in voltage, a change in current, a change in capacitance, or a combination of any two or more thereof.

  19. Gossip-Based Dissemination

    Friedman, Roy; Kermarrec, Anne-Marie; Miranda, Hugo; Rodrigues, Luís

    Gossip-based networking has emerged as a viable approach to disseminate information reliably and efficiently in large-scale systems. Initially introduced for database replication [222], the applicability of the approach extends much further now. For example, it has been applied for data aggregation [415], peer sampling [416] and publish/subscribe systems [845]. Gossip-based protocols rely on a periodic peer-wise exchange of information in wired systems. By changing the way each peer is selected for the gossip communication, and which data are exchanged and processed [451], gossip systems can be used to perform different distributed tasks, such as, among others: overlay maintenance, distributed computation, and information dissemination (a collection of papers on gossip can be found in [451]). In a wired setting, the peer sampling service, allowing for a random or specific peer selection, is often provided as an independent service, able to operate independently from other gossip-based services [416].

  20. Iron-based superconductivity

    Johnson, Peter D; Yin, Wei-Guo

    2015-01-01

    This volume presents an in-depth review of experimental and theoretical studies on the newly discovered Fe-based superconductors.  Following the Introduction, which places iron-based superconductors in the context of other unconventional superconductors, the book is divided into three sections covering sample growth, experimental characterization, and theoretical understanding.  To understand the complex structure-property relationships of these materials, results from a wide range of experimental techniques and theoretical approaches are described that probe the electronic and magnetic proper

  1. Evidence-Based Development

    Hertzum, Morten; Simonsen, Jesper

    2004-01-01

    Systems development is replete with projects that represent substantial resource investments but result in systems that fail to meet users’ needs. Evidence-based development is an emerging idea intended to provide means for managing customer-vendor relationships and working systematically toward...... meeting customer needs. We are suggesting that the effects of the use of a system should play a prominent role in the contractual definition of IT projects and that contract fulfilment should be determined on the basis of evidence of these effects. Based on two ongoing studies of home-care management...

  2. Video-based rendering

    Magnor, Marcus A

    2005-01-01

    Driven by consumer-market applications that enjoy steadily increasing economic importance, graphics hardware and rendering algorithms are a central focus of computer graphics research. Video-based rendering is an approach that aims to overcome the current bottleneck in the time-consuming modeling process and has applications in areas such as computer games, special effects, and interactive TV. This book offers an in-depth introduction to video-based rendering, a rapidly developing new interdisciplinary topic employing techniques from computer graphics, computer vision, and telecommunication en

  3. Process-based costing.

    Lee, Robert H; Bott, Marjorie J; Forbes, Sarah; Redford, Linda; Swagerty, Daniel L; Taunton, Roma Lee

    2003-01-01

    Understanding how quality improvement affects costs is important. Unfortunately, low-cost, reliable ways of measuring direct costs are scarce. This article builds on the principles of process improvement to develop a costing strategy that meets both criteria. Process-based costing has 4 steps: developing a flowchart, estimating resource use, valuing resources, and calculating direct costs. To illustrate the technique, this article uses it to cost the care planning process in 3 long-term care facilities. We conclude that process-based costing is easy to implement; generates reliable, valid data; and allows nursing managers to assess the costs of new or modified processes.

  4. Inkjet-based micromanufacturing

    Korvink, Jan G; Shin, Dong-Youn; Brand, Oliver; Fedder, Gary K; Hierold, Christofer; Tabata, Osamu

    2012-01-01

    Inkjet-based Micromanufacturing Inkjet technology goes way beyond putting ink on paper: it enables simpler, faster and more reliable manufacturing processes in the fields of micro- and nanotechnology. Modern inkjet heads are per se precision instruments that deposit droplets of fluids on a variety of surfaces in programmable, repeating patterns, allowing, after suitable modifications and adaptations, the manufacturing of devices such as thin-film transistors, polymer-based displays and photovoltaic elements. Moreover, inkjet technology facilitates the large-scale production of flexible RFID tr

  5. On multivariate Wilson bases

    Bownik, Marcin; Jakobsen, Mads Sielemann; Lemvig, Jakob

    2017-01-01

    A Wilson system is a collection of finite linear combinations of time frequency shifts of a square integrable function. In this paper we give an account of the construction of bimodular Wilson bases in higher dimensions from Gabor frames of redundancy two.......A Wilson system is a collection of finite linear combinations of time frequency shifts of a square integrable function. In this paper we give an account of the construction of bimodular Wilson bases in higher dimensions from Gabor frames of redundancy two....

  6. Evaluations of sampling methods for darkling beetles (Alphitobius diaperinus) in the litter of turkey and broiler houses.

    Safrit, R D; Axtell, R C

    1984-12-01

    Materials placed on the litter in turkey and broiler houses were evaluated as sampling devices for the larvae and adults of Alphitobius diaperinus (lesser mealworm or darkling beetle). Insects harbored in, on, and between pieces of the materials were counted after 1-week exposure. Pan traps consisting of two stacked pieces of 1.3-cm thick foil-covered polyisocyanurate insulation (Celotex) placed under a protective metal pan staked to the litter surface was a more effective sampling device than pan traps using thicker (5 cm) Celotex, 3.8 cm thick polystyrene (Styrofoam), or two stacked pieces of wood. A tube trap consisting of rolled fluted corrugated cardboard inserted in a section of polyvinyl chloride pipe was as effective a sampling device as the two pieces of Celotex in a pan trap and was more convenient to use. Six pieces of corrugated cardboard stacked under a pan caught larger numbers of beetle larvae and adults but was awkward to handle and impractical. Placement of sampling devices in the major subhabitats (open center, near walls, near feeders, and near waterers) in turkey and broiler houses affected catches of beetle larvae and adults. The open center area was satisfactory and most convenient.

  7. Supramolecular fluorene based materials

    Abbel, R.J.

    2008-01-01

    This thesis describes the use of noncovalent interactions in order to manipulate and control the self-assembly and morphology of electroactive fluorene-based materials. The supramolecular arrangement of p-conjugated polymers and oligomers can strongly influence their electronic and photophysical

  8. EPICS based DAQ system

    Cheng Weixing; Chen Yongzhong; Zhou Weimin; Ye Kairong; Liu Dekang

    2002-01-01

    EPICS is the most popular developing platform to build control system and beam diagnostic system in modern physics experiment facilities. An EPICS based data acquisition system was built in Redhat 6.2 operation system. The system is successfully used in the beam position monitor mapping, it improves the mapping process a lot

  9. Scenario-based strategizing

    Lehr, Thomas; Lorenz, Ullrich; Willert, Markus

    2017-01-01

    -based efficacy and robustness. To facilitate the colla- borative strategizing in teams, we propose a matrix with robustness and efficacy as the two axes, which we call the Parmenides Matrix. We assess the impact of the novel approach by applying it in two cases, at a govern- mental agency (German Environmental...

  10. Dictionary Based Image Segmentation

    Dahl, Anders Bjorholm; Dahl, Vedrana Andersen

    2015-01-01

    We propose a method for weakly supervised segmentation of natural images, which may contain both textured or non-textured regions. Our texture representation is based on a dictionary of image patches. To divide an image into separated regions with similar texture we use an implicit level sets...

  11. Web Based VRML Modelling

    Kiss, S.; Sarfraz, M.

    2004-01-01

    Presents a method to connect VRML (Virtual Reality Modeling Language) and Java components in a Web page using EAI (External Authoring Interface), which makes it possible to interactively generate and edit VRML meshes. The meshes used are based on regular grids, to provide an interaction and modeling

  12. Surfel Based Geometry Resonstruction

    Andersen, Vedrana; Aanæs, Henrik; Bærentzen, Jakob Andreas

    2010-01-01

    We propose a method for retrieving a piecewise smooth surface from noisy data. In data acquired by a scanning process sampled points are almost never on the discontinuities making reconstruction of surfaces with sharp features difficult. Our method is based on a Markov Random Field (MRF) formulat...

  13. Diffusion Based Photon Mapping

    Schjøth, Lars; Sporring, Jon; Fogh Olsen, Ole

    2008-01-01

    . To address this problem, we introduce a photon mapping algorithm based on nonlinear anisotropic diffusion. Our algorithm adapts according to the structure of the photon map such that smoothing occurs along edges and structures and not across. In this way, we preserve important illumination features, while...

  14. Evidence-based policy

    Vohnsen, Nina Holm

    2013-01-01

    -makers and the research community (e.g. Boden & Epstein 2006; House of Commons 2006; Cartwright et al 2009; Rod 2010; Vohnsen 2011). This article intends to draw out some general pitfalls in the curious meeting of science and politics by focusing on a particular attempt to make evidence-based legislation in Denmark (for...

  15. Project-Based Science

    Krajcik, Joe

    2015-01-01

    Project-based science is an exciting way to teach science that aligns with the "Next Generation Science Standards" ("NGSS"). By focusing on core ideas along with practices and crosscutting concepts, classrooms become learning environments where teachers and students engage in science by designing and carrying out…

  16. Financing Competency Based Programs.

    Daniel, Annette

    Literature on the background, causes, and current prevalence of competency based programs is synthesized in this report. According to one analysis of the actual and probable costs of minimum competency testing, estimated costs for test development, test administration, bureaucratic structures, and remedial programs for students who cannot pass the…

  17. Computer Based Expert Systems.

    Parry, James D.; Ferrara, Joseph M.

    1985-01-01

    Claims knowledge-based expert computer systems can meet needs of rural schools for affordable expert advice and support and will play an important role in the future of rural education. Describes potential applications in prediction, interpretation, diagnosis, remediation, planning, monitoring, and instruction. (NEC)

  18. Community-Based Care

    ... our e-newsletter! Aging & Health A to Z Community-Based Care Basic Facts & Information A variety of healthcare options ... day care centers are either in churches or community centers. Adult day care is commonly used to care for people who ...

  19. Polymer based tunneling sensor

    Cui, Tianhong (Inventor); Wang, Jing (Inventor); Zhao, Yongjun (Inventor)

    2006-01-01

    A process for fabricating a polymer based circuit by the following steps. A mold of a design is formed through a lithography process. The design is transferred to a polymer substrate through a hot embossing process. A metal layer is then deposited over at least part of said design and at least one electrical lead is connected to said metal layer.

  20. Evidence-based guidelines

    Rovira, Àlex; Wattjes, Mike P; Tintoré, Mar

    2015-01-01

    diagnosis in patients with MS. The aim of this article is to provide guidelines for the implementation of MRI of the brain and spinal cord in the diagnosis of patients who are suspected of having MS. These guidelines are based on an extensive review of the recent literature, as well as on the personal...

  1. School Based Health Centers

    Children's Aid Society, 2012

    2012-01-01

    School Based Health Centers (SBHC) are considered by experts as one of the most effective and efficient ways to provide preventive health care to children. Few programs are as successful in delivering health care to children at no cost to the patient, and where they are: in school. For many underserved children, The Children's Aid Society's…

  2. Internet based benchmarking

    Bogetoft, Peter; Nielsen, Kurt

    2005-01-01

    We discuss the design of interactive, internet based benchmarking using parametric (statistical) as well as nonparametric (DEA) models. The user receives benchmarks and improvement potentials. The user is also given the possibility to search different efficiency frontiers and hereby to explore...

  3. Problem-based learning

    Loyens, Sofie; Kirschner, Paul A.; Paas, Fred

    2010-01-01

    Loyens, S. M. M., Kirschner, P. A., & Paas, F. (2011). Problem-based learning. In S. Graham (Editor-in-Chief), A. Bus, S. Major, & L. Swanson (Associate Editors), APA educational psychology handbook: Vol. 3. Application to learning and teaching (pp. 403-425). Washington, DC: American Psychological

  4. Base tree property

    Balcar, B.; Doucha, Michal; Hrušák, M.

    2015-01-01

    Roč. 32, č. 1 (2015), s. 69-81 ISSN 0167-8094 R&D Projects: GA AV ČR IAA100190902 Institutional support: RVO:67985840 Keywords : forcing * Boolean algebras * base tree Subject RIV: BA - General Mathematics Impact factor: 0.614, year: 2015 http://link.springer.com/article/10.1007/s11083-013-9316-2

  5. unsymmetrical Schiff base complexes

    the effect of the substitutional groups of the Schiff base on the oxidation and reduction potentials, we used ... Electrochemistry of these complexes showed that the presence of electron .... a solution of the ligand (1 mmol) in methanol (15 mL).

  6. Home-based care

    Mrs. Patience Edoho Samson-Akpan

    study was to ascertain the relationship between home-based care and quality of life of PLWHA in support groups in. Calabar South Local Government Area. A correlational design was utilized and a purposive sample of 74 PLWHA participated in the study. A self developed and well validated questionnaire was used for data ...

  7. Mutually unbiased bases

    Mutually unbiased bases play an important role in quantum cryptography [2] and in the optimal determination of the density operator of an ensemble [3,4]. A density operator ρ in N-dimensions depends on N2 1 real quantities. With the help of MUB's, any such density operator can be encoded, in an optimal way, in terms of ...

  8. Scenario-based strategizing

    Lehr, Thomas; Lorenz, Ullrich; Willert, Markus

    2017-01-01

    For over 40 years, scenarios have been promoted as a key technique for forming strategies in uncertain en- vironments. However, many challenges remain. In this article, we discuss a novel approach designed to increase the applicability of scenario-based strategizing in top management teams. Drawi...... Ministry) and a firm affected by disruptive change (Bosch, leading global supplier of technology and solutions)....

  9. 80537 based distance relay

    Pedersen, Knud Ole Helgesen

    1999-01-01

    A method for implementing a digital distance relay in the power system is described.Instructions are given on how to program this relay on a 80537 based microcomputer system.The problem is used as a practical case study in the course 53113: Micocomputer applications in the power system.The relay...

  10. Mojave Base Station Implementation

    Koscielski, C. G.

    1984-01-01

    A 12.2 meter diameter X-Y mount antenna was reconditioned for use by the crustal dynamic project as a fixed base station. System capabilities and characteristics and key performance parameters for subsystems are presented. The implementation is completed.

  11. Model-based consensus

    Boumans, M.; Martini, C.; Boumans, M.

    2014-01-01

    The aim of the rational-consensus method is to produce "rational consensus", that is, "mathematical aggregation", by weighing the performance of each expert on the basis of his or her knowledge and ability to judge relevant uncertainties. The measurement of the performance of the experts is based on

  12. Model-based consensus

    Boumans, Marcel

    2014-01-01

    The aim of the rational-consensus method is to produce “rational consensus”, that is, “mathematical aggregation”, by weighing the performance of each expert on the basis of his or her knowledge and ability to judge relevant uncertainties. The measurement of the performance of the experts is based on

  13. Animation-based Sketching

    Vistisen, Peter

    This thesis is based on the results of a three-year long PhD-study at the Department of Communication and Psychology at Aalborg University. The thesis consist of five original papers, a book manuscript, as well as a linking text with the thesis’ research questions, research design, and summary...

  14. Refractive index based measurements

    2014-01-01

    In a method for performing a refractive index based measurement of a property of a fluid such as chemical composition or temperature, a chirp in the local spatial frequency of interference fringes of an interference pattern is reduced by mathematical manipulation of the recorded light intensity...

  15. Performance based fault diagnosis

    Niemann, Hans Henrik

    2002-01-01

    Different aspects of fault detection and fault isolation in closed-loop systems are considered. It is shown that using the standard setup known from feedback control, it is possible to formulate fault diagnosis problems based on a performance index in this general standard setup. It is also shown...

  16. Schiff base ligand

    Unknown

    Low-temperature stoichiometric Schiff base reaction in air in 3 : 1 mole ratio between benz- aldehyde and triethylenetetramine (trien) in methanol yields a novel tetraaza µ-bis(bidentate) acyclic ligand L. It was .... electrochemical work was performed as reported in ..... change in ligand shape through change in oxidation.

  17. ISFET based enzyme sensors

    van der Schoot, Bart H.; Bergveld, Piet

    1987-01-01

    This paper reviews the results that have been reported on ISFET based enzyme sensors. The most important improvement that results from the application of ISFETs instead of glass membrane electrodes is in the method of fabrication. Problems with regard to the pH dependence of the response and the

  18. Microcontroller base process emulator

    Jovrea Titus Claudiu

    2009-01-01

    This paper describes the design of a microcontroller base emulator for a conventional industrial process. The emulator is made with microcontroller and is used for testing and evaluating the performances of the industrial regulators. The parameters of the emulated process are fully customizable online and downloadable thru a serial communication from a personal computer.

  19. REST based service composition

    Grönvall, Erik; Ingstrup, Mads; Pløger, Morten

    2011-01-01

    This paper presents an ongoing work developing and testing a Service Composition framework based upon the REST architecture named SECREST. A minimalistic approach have been favored instead of a creating a complete infrastructure. One focus has been on the system's interaction model. Indeed, an aim...

  20. Film of lignocellulosic carbon material for self-supporting electrodes in electric double-layer capacitors

    Tsubasa Funabashi

    2013-09-01

    Full Text Available A novel thin, wood-based carbon material with heterogeneous pores, film of lignocellulosic carbon material (FLCM, was successfully fabricated by carbonizing softwood samples of Picea jezoensis (Jezo spruce. Simultaneous increase in the specific surface area of FLCM and its affinity for electrolyte solvents in an electric double-layer capacitor (EDLC were achieved by the vacuum ultraviolet/ozone (VUV/O3 treatment. This treatment increased the specific surface area of FLCM by 50% over that of original FLCM. The results obtained in this study confirmed that FLCM is an appropriate self-supporting EDLC electrode material without any warps and cracks.

  1. Convolution based profile fitting

    Kern, A.; Coelho, A.A.; Cheary, R.W.

    2002-01-01

    Full text: In convolution based profile fitting, profiles are generated by convoluting functions together to form the observed profile shape. For a convolution of 'n' functions this process can be written as, Y(2θ)=F 1 (2θ)x F 2 (2θ)x... x F i (2θ)x....xF n (2θ). In powder diffractometry the functions F i (2θ) can be interpreted as the aberration functions of the diffractometer, but in general any combination of appropriate functions for F i (2θ) may be used in this context. Most direct convolution fitting methods are restricted to combinations of F i (2θ) that can be convoluted analytically (e.g. GSAS) such as Lorentzians, Gaussians, the hat (impulse) function and the exponential function. However, software such as TOPAS is now available that can accurately convolute and refine a wide variety of profile shapes numerically, including user defined profiles, without the need to convolute analytically. Some of the most important advantages of modern convolution based profile fitting are: 1) virtually any peak shape and angle dependence can normally be described using minimal profile parameters in laboratory and synchrotron X-ray data as well as in CW and TOF neutron data. This is possible because numerical convolution and numerical differentiation is used within the refinement procedure so that a wide range of functions can easily be incorporated into the convolution equation; 2) it can use physically based diffractometer models by convoluting the instrument aberration functions. This can be done for most laboratory based X-ray powder diffractometer configurations including conventional divergent beam instruments, parallel beam instruments, and diffractometers used for asymmetric diffraction. It can also accommodate various optical elements (e.g. multilayers and monochromators) and detector systems (e.g. point and position sensitive detectors) and has already been applied to neutron powder diffraction systems (e.g. ANSTO) as well as synchrotron based

  2. Integrated Case Based and Rule Based Reasoning for Decision Support

    Eshete, Azeb Bekele

    2009-01-01

    This project is a continuation of my specialization project which was focused on studying theoretical concepts related to case based reasoning method, rule based reasoning method and integration of them. The integration of rule-based and case-based reasoning methods has shown a substantial improvement with regards to performance over the individual methods. Verdande Technology As wants to try integrating the rule based reasoning method with an existing case based system. This project focu...

  3. Effects of gamma radiation ({sup 60}Co) on the main physical and chemical properties of health care packaging and their compounds paper and multilayer plastic film, used for health products sterilization; Efeitos da radiacao gama (Cobalto-60) nas principais propriedades fisicas e quimicas da embalagens compostas por papel grau cirurgico e filme plastico laminado, destinadas a esterilizacao de produtos para saude

    Porto, Karina Meschini Batista Geribello

    2013-07-01

    Gamma radiation is one of the technologies applied for the sterilization of packaging systems containing products for health. During sterilization process it is critical that the properties of packages are maintained. In this study two samples of commercial pouch packaging comprised of surgical grade paper on one side and the other side multilayer plastic film were irradiated with gamma rays. The following doses were applied 25 kGy (1,57 kGy/h) and 50 kGy (1,48 kGy/h). One packaging sample was paper formed by softwood fibers and multilayer plastic film based on poly(ethylene terephthalate) (PET)/polyethylene (PE). The second type of paper sample was made by a mixture of softwood and hardwood fibers and multilayer plastic film based on polyethylene terephthalate (ethylene) (PET)/polypropylene (PP). The effects of radiation on the physical and chemical properties of papers and multilayer plastic films, as well as the properties of the package were studied. The paper was the more radiation sensitive among the studied materials and radiation effects were more pronounced at brightness, pH, tearing resistance, bursting strength and tensile strength. Nonetheless, worst comparatively effects were noted on the sample made by a mixture of softwood and hardwood fibers. The porosity of paper was enhanced by 50 kGy. In the case of plastic films, radiation effects on tensile strength was the most pronounced property for both samples. In the case of the packaging the sealing resistance decreased with radiation. The effects observed for the treatment at 50 kGy were more pronounced when compared to 25 kGy. This last is the dose which is usually applied to sterilize health products. A dosimetry study was performed during irradiation at 25 kGy, 40 kGy and 50 kGy and its importance may be reported by the average dose variation 20 %. (author)

  4. Effects of gamma radiation (60Co) on the main physical and chemical properties of health care packaging and their compounds paper and multilayer plastic film, used for health products sterilization

    Porto, Karina Meschini Batista Geribello

    2013-01-01

    Gamma radiation is one of the technologies applied for the sterilization of packaging systems containing products for health. During sterilization process it is critical that the properties of packages are maintained. In this study two samples of commercial pouch packaging comprised of surgical grade paper on one side and the other side multilayer plastic film were irradiated with gamma rays. The following doses were applied 25 kGy (1,57 kGy/h) and 50 kGy (1,48 kGy/h). One packaging sample was paper formed by softwood fibers and multilayer plastic film based on poly(ethylene terephthalate) (PET)/polyethylene (PE). The second type of paper sample was made by a mixture of softwood and hardwood fibers and multilayer plastic film based on polyethylene terephthalate (ethylene) (PET)/polypropylene (PP). The effects of radiation on the physical and chemical properties of papers and multilayer plastic films, as well as the properties of the package were studied. The paper was the more radiation sensitive among the studied materials and radiation effects were more pronounced at brightness, pH, tearing resistance, bursting strength and tensile strength. Nonetheless, worst comparatively effects were noted on the sample made by a mixture of softwood and hardwood fibers. The porosity of paper was enhanced by 50 kGy. In the case of plastic films, radiation effects on tensile strength was the most pronounced property for both samples. In the case of the packaging the sealing resistance decreased with radiation. The effects observed for the treatment at 50 kGy were more pronounced when compared to 25 kGy. This last is the dose which is usually applied to sterilize health products. A dosimetry study was performed during irradiation at 25 kGy, 40 kGy and 50 kGy and its importance may be reported by the average dose variation 20 %. (author)

  5. Rock properties data base

    Jackson, R.; Gorski, B.; Gyenge, M.

    1991-03-01

    As mining companies proceed deeper and into areas whose stability is threatened by high and complex stress fields, the science of rock mechanics becomes invaluable in designing underground mine strata control programs. CANMET's Mining Research Laboratories division has compiled a summary of pre- and post-failure mechanical properties of rock types which were tested to provide design data. The 'Rock Properties Data Base' presents the results of these tests, and includes many rock types typical of Canadian mine environments. The data base also contains 'm' and 's' values determined using Hoek and Brown's failure criteria for both pre- and post-failure conditions. 7 refs., 3 tabs., 9 figs., 1 append.

  6. Sparse approximation with bases

    2015-01-01

    This book systematically presents recent fundamental results on greedy approximation with respect to bases. Motivated by numerous applications, the last decade has seen great successes in studying nonlinear sparse approximation. Recent findings have established that greedy-type algorithms are suitable methods of nonlinear approximation in both sparse approximation with respect to bases and sparse approximation with respect to redundant systems. These insights, combined with some previous fundamental results, form the basis for constructing the theory of greedy approximation. Taking into account the theoretical and practical demand for this kind of theory, the book systematically elaborates a theoretical framework for greedy approximation and its applications.  The book addresses the needs of researchers working in numerical mathematics, harmonic analysis, and functional analysis. It quickly takes the reader from classical results to the latest frontier, but is written at the level of a graduate course and do...

  7. Problem Based Game Design

    Reng, Lars; Schoenau-Fog, Henrik

    2011-01-01

    At Aalborg University’s department of Medialogy, we are utilizing the Problem Based Learning method to encourage students to solve game design problems by pushing the boundaries and designing innovative games. This paper is concerned with describing this method, how students employ it in various ...... projects and how they learn to analyse, design, and develop for innovation by using it. We will present various cases to exemplify the approach and focus on how the method engages students and aspires for innovation in digital entertainment and games.......At Aalborg University’s department of Medialogy, we are utilizing the Problem Based Learning method to encourage students to solve game design problems by pushing the boundaries and designing innovative games. This paper is concerned with describing this method, how students employ it in various...

  8. Technology based Education System

    Kant Hiran, Kamal; Doshi, Ruchi; Henten, Anders

    2016-01-01

    Abstract - Education plays a very important role for the development of the country. Education has multiple dimensions from schooling to higher education and research. In all these domains, there is invariably a need for technology based teaching and learning tools are highly demanded in the acad......Abstract - Education plays a very important role for the development of the country. Education has multiple dimensions from schooling to higher education and research. In all these domains, there is invariably a need for technology based teaching and learning tools are highly demanded...... in the academic institutions. Thus, there is a need of comprehensive technology support system to cater the demands of all educational actors. Cloud Computing is one such comprehensive and user-friendly technology support environment that is the need of an hour. Cloud computing is the emerging technology that has...

  9. Knowledge based maintenance

    Sturm, A [Hamburgische Electacitaets-Werke AG Hamburg (Germany)

    1998-12-31

    The establishment of maintenance strategies is of crucial significance for the reliability of a plant and the economic efficiency of maintenance measures. Knowledge about the condition of components and plants from the technical and business management point of view therefore becomes one of the fundamental questions and the key to efficient management and maintenance. A new way to determine the maintenance strategy can be called: Knowledge Based Maintenance. A simple method for determining strategies while taking the technical condition of the components of the production process into account to the greatest possible degree which can be shown. A software with an algorithm for Knowledge Based Maintenance leads the user during complex work to the determination of maintenance strategies for this complex plant components. (orig.)

  10. Knowledge based maintenance

    Sturm, A. [Hamburgische Electacitaets-Werke AG Hamburg (Germany)

    1997-12-31

    The establishment of maintenance strategies is of crucial significance for the reliability of a plant and the economic efficiency of maintenance measures. Knowledge about the condition of components and plants from the technical and business management point of view therefore becomes one of the fundamental questions and the key to efficient management and maintenance. A new way to determine the maintenance strategy can be called: Knowledge Based Maintenance. A simple method for determining strategies while taking the technical condition of the components of the production process into account to the greatest possible degree which can be shown. A software with an algorithm for Knowledge Based Maintenance leads the user during complex work to the determination of maintenance strategies for this complex plant components. (orig.)

  11. Conducting Polymer Based Nanobiosensors

    Chul Soon Park

    2016-06-01

    Full Text Available In recent years, conducting polymer (CP nanomaterials have been used in a variety of fields, such as in energy, environmental, and biomedical applications, owing to their outstanding chemical and physical properties compared to conventional metal materials. In particular, nanobiosensors based on CP nanomaterials exhibit excellent performance sensing target molecules. The performance of CP nanobiosensors varies based on their size, shape, conductivity, and morphology, among other characteristics. Therefore, in this review, we provide an overview of the techniques commonly used to fabricate novel CP nanomaterials and their biosensor applications, including aptasensors, field-effect transistor (FET biosensors, human sense mimicking biosensors, and immunoassays. We also discuss prospects for state-of-the-art nanobiosensors using CP nanomaterials by focusing on strategies to overcome the current limitations.

  12. Fusion safety data base

    Laats, E.T.; Hardy, H.A.

    1983-01-01

    The purpose of this Fusion Safety Data Base Program is to provide a repository of data for the design and development of safe commercial fusion reactors. The program is sponsored by the United States Department of Energy (DOE), Office of Fusion Energy. The function of the program is to collect, examine, permanently store, and make available the safety data to the entire US magnetic-fusion energy community. The sources of data will include domestic and foreign fusion reactor safety-related research programs. Any participant in the DOE Program may use the Data Base Program from his terminal through user friendly dialog and can view the contents in the form of text, tables, graphs, or system diagrams

  13. Maintaining Relationship Based Procurement

    Peter Davis

    2012-11-01

    Full Text Available Alliance and relationship projects are increasingin number and represent a large pool of work. Tobe successful relationship style contracts dependon soft-dollar factors, particularly the participants'ability to work together within an agreedframework, generally they are not based on lowbid tendering. Participants should be prepared todo business in an open environment based ontrust and mutually agreed governance. Theresearch evaluates relationship maintenance inthe implementation phase of constructionalliances - a particular derivative of relationshipstyle contracts. To determine the factors thatcontribute to relationship maintenance forty-nineexperienced Australian alliance projectmanagers were interviewed. The main findingswere; the development of relationships early inthe project form building blocks of success fromwhich relationships are maintained and projectvalue added; quality facilitation plays animportant part in relationship maintenance and ahybrid organisation created as a result of alliancedevelopment overcomes destructiveorganisational boundaries. Relationshipmaintenance is integral to alliance project controland failure to formalise it and pay attention toprocess and past outcomes will undermine analliance project's potential for success.

  14. Location-based Scheduling

    Andersson, Niclas; Christensen, Knud

    on the market. However, CPM is primarily an activity based method that takes the activity as the unit of focus and there is criticism raised, specifically in the case of construction projects, on the method for deficient management of construction work and continuous flow of resources. To seek solutions...... to the identified limitations of the CPM method, an alternative planning and scheduling methodology that includes locations is tested. Location-based Scheduling (LBS) implies a shift in focus, from primarily the activities to the flow of work through the various locations of the project, i.e. the building. LBS uses...... the graphical presentation technique of Line-of-balance, which is adapted for planning and management of work-flows that facilitates resources to perform their work without interruptions caused by other resources working with other activities in the same location. As such, LBS and Lean Construction share...

  15. Trajectory Based Traffic Analysis

    Krogh, Benjamin Bjerre; Andersen, Ove; Lewis-Kelham, Edwin

    2013-01-01

    We present the INTRA system for interactive path-based traffic analysis. The analyses are developed in collaboration with traffic researchers and provide novel insights into conditions such as congestion, travel-time, choice of route, and traffic-flow. INTRA supports interactive point-and-click a......We present the INTRA system for interactive path-based traffic analysis. The analyses are developed in collaboration with traffic researchers and provide novel insights into conditions such as congestion, travel-time, choice of route, and traffic-flow. INTRA supports interactive point......-and-click analysis, due to a novel and efficient indexing structure. With the web-site daisy.aau.dk/its/spqdemo/we will demonstrate several analyses, using a very large real-world data set consisting of 1.9 billion GPS records (1.5 million trajectories) recorded from more than 13000 vehicles, and touching most...

  16. Carbon Nanotube based Nanotechnolgy

    Meyyappan, M.

    2000-10-01

    Carbon nanotube(CNT) was discovered in the early 1990s and is an off-spring of C60(the fullerene or buckyball). CNT, depending on chirality and diameter, can be metallic or semiconductor and thus allows formation of metal-semiconductor and semiconductor-semiconductor junctions. CNT exhibits extraordinary electrical and mechanical properties and offers remarkable potential for revolutionary applications in electronics devices, computing and data storage technology, sensors, composites, storage of hydrogen or lithium for battery development, nanoelectromechanical systems(NEMS), and as tip in scanning probe microscopy(SPM) for imaging and nanolithography. Thus the CNT synthesis, characterization and applications touch upon all disciplines of science and engineering. A common growth method now is based on CVD though surface catalysis is key to synthesis, in contrast to many CVD applications common in microelectronics. A plasma based variation is gaining some attention. This talk will provide an overview of CNT properties, growth methods, applications, and research challenges and opportunities ahead.

  17. Spintronics-based computing

    Prenat, Guillaume

    2015-01-01

    This book provides a comprehensive introduction to spintronics-based computing for the next generation of ultra-low power/highly reliable logic, which is widely considered a promising candidate to replace conventional, pure CMOS-based logic. It will cover aspects from device to system-level, including magnetic memory cells, device modeling, hybrid circuit structure, design methodology, CAD tools, and technological integration methods. This book is accessible to a variety of readers and little or no background in magnetism and spin electronics are required to understand its content.  The multidisciplinary team of expert authors from circuits, devices, computer architecture, CAD and system design reveal to readers the potential of spintronics nanodevices to reduce power consumption, improve reliability and enable new functionality.  .

  18. Knowledge Based Economy Assessment

    Madalina Cristina Tocan

    2012-01-01

    The importance of knowledge-based economy (KBE) in the XXI century is evident. In the article the reflection of knowledge on economy is analyzed. The main point is targeted to the analysis of characteristics of knowledge expression in economy and to the construction of structure of KBE expression. This allows understanding the mechanism of functioning of knowledge economy. The authors highlight the possibility to assess the penetration level of KBE which could manifest itself trough the exist...

  19. Luxury-based Growth

    Shiro Kuwahara

    2006-01-01

    Assuming that there exists a preference for luxury goods and a knowledge spillover from luxury goods production to goods production, this paper constructs an endogenous economic growth model. The model predicts two steady states: one is a steady positive growth state with regard to luxury goods production, and the other is a zero growth state in the absence of luxury goods production. Thus, this study examines the polarization of economies based on luxury goods consumption

  20. Base Stability of Aminocyclopropeniums

    2017-11-01

    PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) US Army Research Laboratory Weapons and Materials Research Directorate (ATTN: RDRL-WMM-G) 2800 Powder...Mill Road Adelphi, MD 20783-1138 8. PERFORMING ORGANIZATION REPORT NUMBER ARL-TR-8204 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES...fuel cells to test their utility in anion exchange membranes. While the aminocyclopropeniums showed poor base stability, the cyclopropenium cation

  1. Granular loess classification based

    Browzin, B.S.

    1985-01-01

    This paper discusses how loess might be identified by two index properties: the granulometric composition and the dry unit weight. These two indices are necessary but not always sufficient for identification of loess. On the basis of analyses of samples from three continents, it was concluded that the 0.01-0.5-mm fraction deserves the name loessial fraction. Based on the loessial fraction concept, a granulometric classification of loess is proposed. A triangular chart is used to classify loess

  2. Educational Process Material Base

    Olga Ozerova; Irina Zabaturina; Vera Kuznetsova; Galina Kovaleva

    2012-01-01

    Based on the data obtained by the Institute for Statistical Studies and the Economics of Knowledge, National Research University - Higher School of Economics Olga Ozerova - Head of the Department for Statistics of Education, Institute for Statistical Studies and the Economics of Knowledge, National Research University - Higher School of Economics, Moscow, Russian Federation. Email: Address: 18 Myasnitskaya St., Moscow, 101000, Russian Federation.Irina Zabaturina - senior resea...

  3. Supramolecular fluorene based materials

    Abbel, R.J.

    2008-01-01

    This thesis describes the use of noncovalent interactions in order to manipulate and control the self-assembly and morphology of electroactive fluorene-based materials. The supramolecular arrangement of p-conjugated polymers and oligomers can strongly influence their electronic and photophysical properties. Therefore, a detailed understanding of such organisation processes is essential for the optimisation of the performance of these materials as applied in optoelectronic devices. In order to...

  4. Graphene-based Nanoelectronics

    2013-02-01

    Electrodes were fabricated by drop casting solutions containing the graphene oxide (GO)/CNT/MnAc materials onto titanium (Ti) or stainless steel current...silicon carbide (SiC) substrate can induce a splitting of up to 0.3 eV between the maximum of the valence and minimum of the conduction bands at the...simultaneously hinders the formation of multilayer graphene domains. These results are based on a diffusion-segregation model for carbon precipitation on a Ni

  5. Spiritual-based Leadership

    Pruzan, Peter

    2015-01-01

    Although far from mainstream, the concept of spiritual-based leadership is emerging as an inclusive and yet highly personal approach to leadership that integrates a leader’s inner perspectives on identity, purpose, responsibility and success with her or his decisions and actions in the outer world...... of business—and therefore it is also emerging as a significant framework for understanding, practicing, communicating and teaching the art and profession of leadership....

  6. Arduino based laser control

    Bernal Muñoz, Ferran

    2015-01-01

    ARDUINO is a vey usefull platform for prototypes. In this project ARDUINO will be used for controling a Semiconductor Tuneable Laser. [ANGLÈS] Diode laser for communications control based on an Arduino board. Temperature control implementation. Software and hardware protection for the laser implementation. [CASTELLÀ] Control de un láser de comunicaciones ópticas desde el ordenador utilizando una placa Arduino. Implementación de un control de temperatura y protección software y hardware ...

  7. Design bases - Concrete structures

    Diaz-Llanos Ros, M.

    1993-01-01

    The most suitable title for Section 2 is 'Design Bases', which covers not only calculation but also the following areas: - Structural design concepts. - Project criteria. - Material specifications. These concepts are developed in more detail in the following sections. The numbering in this document is neither complete nor hierarchical since, for easier cross referencing, it corresponds to the paragraphs of Eurocode 2 Part 1 (hereinafter 'EUR-2') which are commented on. (author)

  8. Biosphere data base revision

    Bergstroem, U.; Andersson, K.; Sundblad, B.

    1985-12-01

    The turnover of long-lived radionuclides in the biosphere has been modelled some time ago and the exposure to man was calculated. The nuclides were long-lived actinides and fission products leaking from a simulated deep rock repository for spent nuclear fuel. The data base for these calculations has been updated in the present work and in addition a number of nuclides that were not included in the earlier work have been treated. (G.B.)

  9. Air Force Smart Bases

    2017-10-19

    initiates notification to all personnel on the base, the giant voice announces a lock down, everyone’s smart device shows an alarm requesting...location of the detected sound, they easily find a hunter and send his picture back to the IOC, where the hunter’s identity is verified through facial...computer goes into sleep mode, the thermostat goes back to unoccupied mode and his door locks as he walks through. Meanwhile over in the IOC

  10. Polypeptide based hydrogels

    Hanay, Saltuk

    2018-01-01

    There is a need for biocompatible, biodegradable, 3-D printable and stable hydrogels especially in the areas of tissue engineering, drug delivery, bio-sensing technologies and antimicrobial coatings. The main aim of this Ph.D. work was to fabricate polypeptide based hydrogel which may find a potential application in those fields. Focusing on tyrosine or tryptophan-containing copolypeptides prepared by NCarboxyanhydride (NCA) polymerizations, three different crosslinking strategies have been t...

  11. Knowledge-based utility

    Chwalowski, M.

    1997-01-01

    This presentation provides industry examples of successful marketing practices by companies facing deregulation and competition. The common thread through the examples is that long term survival of today's utility structure is dependent on the strategic role of knowledge. As opposed to regulated monopolies which usually own huge physical assets and have very little intelligence about their customers, unregulated enterprises tend to be knowledge-based, characterized by higher market value than book value. A knowledge-based enterprise gathers data, creates information and develops knowledge by leveraging it as a competitive weapon. It institutionalizes human knowledge as a corporate asset for use over and over again by the use of databases, computer networks, patents, billing, collection and customer services (BCCS), branded interfaces and management capabilities. Activities to become knowledge-based such as replacing inventory/fixed assets with information about material usage to reduce expenditure and achieve more efficient operations, and by focusing on integration and value-adding delivery capabilities, were reviewed

  12. Microbead agglutination based assays

    Kodzius, Rimantas

    2013-01-21

    We report a simple and rapid room temperature assay for point-of-care (POC) testing that is based on specific agglutination. Agglutination tests are based on aggregation of microbeads in the presence of a specific analyte thus enabling the macroscopic observation. Such tests are most often used to explore antibody-antigen reactions. Agglutination has been used for protein assays using a biotin/streptavidin system as well as a hybridization based assay. The agglutination systems are prone to selftermination of the linking analyte, prone to active site saturation and loss of agglomeration at high analyte concentrations. We investigated the molecular target/ligand interaction, explaining the common agglutination problems related to analyte self-termination, linkage of the analyte to the same bead instead of different microbeads. We classified the agglutination process into three kinds of assays: a two- component assay, a three-component assay and a stepped three- component assay. Although we compared these three kinds of assays for recognizing DNA and protein molecules, the assay can be used for virtually any molecule, including ions and metabolites. In total, the optimized assay permits detecting analytes with high sensitivity in a short time, 5 min, at room temperature. Such a system is appropriate for POC testing.

  13. As bases do petismo

    David Samuels

    2004-10-01

    Full Text Available A partir dos dados do ESEB de 2002 o autor realiza um estudo das bases eleitorais do PT e de hipóteses sobre a natureza do petismo. Através de técnicas estatísticas multivariadas, são testadas relações do petismo com variáveis demográficas, socioeconômicas e variáveis relativas a questões políticas específicas. Os resultados apontam que apenas a escolaridade tem uma associação específica com o petismo, com implicações para o seu comportamento sócio-político.Based on the results of the 2002 Brazilian Electoral Study, the author analyses the electoral bases of the Worker´s Party and the factors associated with the "petismo". The relationships between the "petismo"and the socioeconomic, demographic and political variables are tested using multivariate analysis. The results indicate that the only "social category"associated with "petismo"is level of education, and it has clear implications to their social and political behavior.

  14. Value-based genomics.

    Gong, Jun; Pan, Kathy; Fakih, Marwan; Pal, Sumanta; Salgia, Ravi

    2018-03-20

    Advancements in next-generation sequencing have greatly enhanced the development of biomarker-driven cancer therapies. The affordability and availability of next-generation sequencers have allowed for the commercialization of next-generation sequencing platforms that have found widespread use for clinical-decision making and research purposes. Despite the greater availability of tumor molecular profiling by next-generation sequencing at our doorsteps, the achievement of value-based care, or improving patient outcomes while reducing overall costs or risks, in the era of precision oncology remains a looming challenge. In this review, we highlight available data through a pre-established and conceptualized framework for evaluating value-based medicine to assess the cost (efficiency), clinical benefit (effectiveness), and toxicity (safety) of genomic profiling in cancer care. We also provide perspectives on future directions of next-generation sequencing from targeted panels to whole-exome or whole-genome sequencing and describe potential strategies needed to attain value-based genomics.

  15. Reactivity of lignin with different composition of aromatic syringyl/guaiacyl structures and erythro/threo side chain structures in β-O-4 type during alkaline delignification: as a basis for the different degradability of hardwood and softwood lignin.

    Shimizu, Satoko; Yokoyama, Tomoya; Akiyama, Takuya; Matsumoto, Yuji

    2012-07-04

    The reactivity of lignin during alkaline delignification was quantitatively investigated focusing on the effect of the structural differences between syringyl and guaiacyl aromatic nuclei and between erythro and threo in the side chain of β-O-4 type lignin substructure on the β-O-4 bond cleavage rate. It was known that the ratio of this reaction rate of the erythro to threo isomers of the dimeric β-O-4 type lignin model compound with two guaiacyl aromatic nuclei was ca. 4. However, the presence of a syringyl nucleus strongly influenced the rate, and the ratio of the syringyl type analogue was in the range between 2.7 and 8.0 depending on the reaction temperature. The effect of syringyl nucleus on the enhancement of the reaction rate appeared to be greater when the syringyl nucleus consists of the cleaving ether bond rather than being a member of the carbon framework.

  16. Nanoplatform-based molecular imaging

    Chen, Xiaoyuan

    2011-01-01

    "Nanoplathform-Based Molecular Imaging provides rationale for using nanoparticle-based probes for molecular imaging, then discusses general strategies for this underutilized, yet promising, technology...

  17. Polyolefin-Based Aerogels

    Lee, Je Kyun; Gould, George

    2012-01-01

    An organic polybutadiene (PB) rubberbased aerogel insulation material was developed that will provide superior thermal insulation and inherent radiation protection, exhibiting the flexibility, resiliency, toughness, and durability typical of the parent polymer, yet with the low density and superior insulation properties associated with the aerogels. The rubbery behaviors of the PB rubber-based aerogels are able to overcome the weak and brittle nature of conventional inorganic and organic aerogel insulation materials. Additionally, with higher content of hydrogen in their structure, the PB rubber aerogels will also provide inherently better radiation protection than those of inorganic and carbon aerogels. Since PB rubber aerogels also exhibit good hydrophobicity due to their hydrocarbon molecular structure, they will provide better performance reliability and durability as well as simpler, more economic, and environmentally friendly production over the conventional silica or other inorganic-based aerogels, which require chemical treatment to make them hydrophobic. Inorganic aerogels such as silica aerogels demonstrate many unusual and useful properties. There are several strategies to overcoming the drawbacks associated with the weakness and brittleness of silica aerogels. Development of the flexible fiber-reinforced silica aerogel composite blanket has proven one promising approach, providing a conveniently fielded form factor that is relatively robust toward handling in industrial environments compared to silica aerogel monoliths. However, the flexible silica aerogel composites still have a brittle, dusty character that may be undesirable, or even intolerable, in certain applications. Although the cross-linked organic aerogels such as resorcinol-formaldehyde (RF), polyisocyanurate, and cellulose aerogels show very high impact strength, they are also very brittle with little elongation (i.e., less rubbery). Also, silica and carbon aerogels are less efficient

  18. Characteristics Data Base

    Lewis, E.D.; Moore, R.S. (Automated Sciences Group, Inc., Oak Ridge, TN (USA))

    1990-08-01

    The LWR Serial Numbers Database System (SNDB) contains detailed data about individual, historically discharged LWR spent fuel assemblies. This data includes the reactor where used, the year the assemblies were discharged, the pool where they are currently stored, assembly type, burnup, weight, enrichment, and an estimate of their radiological properties. This information is distributed on floppy disks to users in the nuclear industry to assist in planning for the permanent nuclear waste repository. This document describes the design and development of the SNDB. It provides a complete description of the file structures and an outline of the major code modules. It serves as a reference for a programmer maintaining the system, or for others interested in the technical detail of this database. This is the initial version of the SNDB. It contains historical data through December 31, 1987, obtained from the Energy Information Administration (EIA). EIA obtains the data from the utility companies via the RW-859 Survey Form. It evaluates and standardizes the data and distributes the resulting batch level database as a large file on magnetic tape. The Characteristics Data Base obtains this database for use in the LWR Quantities Data Base. Additionally, the CDB obtains the individual assembly level detail from EIA for use in the SNDB. While the Quantities Data Base retains only the level of detail necessary for its reporting, the SNDB does retain and use the batch level data to assist in the identification of a particular assembly serial number. We expect to update the SNDB on an annual basis, as new historical data becomes available.

  19. Vision-based interaction

    Turk, Matthew

    2013-01-01

    In its early years, the field of computer vision was largely motivated by researchers seeking computational models of biological vision and solutions to practical problems in manufacturing, defense, and medicine. For the past two decades or so, there has been an increasing interest in computer vision as an input modality in the context of human-computer interaction. Such vision-based interaction can endow interactive systems with visual capabilities similar to those important to human-human interaction, in order to perceive non-verbal cues and incorporate this information in applications such

  20. Knowledge based Entrepreneurship

    Heebøll, John

    This book is dedicated enterprising people with a technical or a scientific background who consider commercializing ideas and inventions within their field of expertise via a new business activity or a new company. It aims at distilling experiences from many successful and not so successful start......-up ventures from the Technical University of Denmark, 1988 – 2008 into practical, portable knowledge that can be used by future knowledge-based entrepreneurs to set up new companies efficiently or to stay away from it; to do what’s needed and avoid the pitfalls....

  1. Polymerization Using Phosphazene Bases

    Zhao, Junpeng

    2015-09-01

    In the recent rise of metal-free polymerization techniques, organic phosphazene superbases have shown their remarkable strength as promoter/catalyst for the anionic polymerization of various types of monomers. Generally, the complexation of phosphazene base with the counterion (proton or lithium cation) significantly improves the nucleophilicity of the initiator/chain end resulting in highly enhanced polymerization rates, as compared with conventional metalbased initiating systems. In this chapter, the general features of phosphazenepromoted/catalyzed polymerizations and the applications in macromolecular engineering (synthesis of functionalized polymers, block copolymers, and macromolecular architectures) are discussed with challenges and perspectives being pointed out.

  2. Web Based Customized Design

    Moi, Morten Benestad

    2013-01-01

    This thesis studies the methods needed to create a web based application to remotely customize a CAD model. This includes customizing a CAD model by using a graphical user interface to be able to remotely control the inputs to- and outputs from the model in NX, and to get the result sent back to the user. Using CAD systems such as NX requires intensive training, is often a slow process and gives a lot of room for errors. An intuitive, simple user interface will eliminate the need for CAD trai...

  3. Location-based games

    Ejsing-Duun, Stine

    In this dissertation, it is explored which prerequisites are necessary in location-based games (LBGs) to make meaningful the meeting between players and spatiality with an emphasis on physical locations. Throughout the dissertation, it has been shown that LBGs affect players’ perception of and be...... possible. The practical contribution is my creation of the LBG Visions of Sara. People continue to play this game in Odense more than two years after its launch, and DJEEO uses it as a showcase, enabling the company to sell similar LBGs....

  4. LIGHTWEIGHT CONCRETE BASED GRANSHLAK

    NETESA M. I.

    2016-02-01

    Full Text Available Raising of problem. Concrete advisable to obtain a low strength with local secondary resources for recycling and reduce the environmental burden on the environment. But it is important to design such concrete compositions with a reduced flow of cement. It is known that the coefficient of efficiency of use of cement in the concrete of the heavy and B10 is less than about 0.5, which is almost two times smaller than in class B15 concrete and above. Even lower coefficient of efficiency in light concrete cement low strength. Therefore, it is important to find patterns determining the composition of lightweight concrete based on local-products industry with more efficient use of cement in them. Purpose.. Based on the analysis of earlier research results, including with the use of methods of mathematical planning of experiments to determine the concrete contents, which can provide the requirements for the underlying layers of the floor, the compressive strength of which should correspond to the class B5. It is important to provide the required strength at minimum flow of the cement, which is the most expensive and energy-intensive part of concrete. Conclusion. Analysis of the test results of control samples of concrete in 28-day-old, the following laws. The required tensile strength of concrete compressive strength of 7.0 MPa can be obtained in the test range when used in formulations as a filler as the Dnieper hydroelectric power station fly ash and tailings Krivoy Rog iron ore YuGOK. To ensure providing the required characteristic strength of the concrete in the underlying layers of the floor is advisable to use a nominal composition per cubic meter of concrete: cement 160 kg granshlaka Plant named after Petrovsky, 675 kg of fly ash Dnieper HPP 390 kg, 400 kg of sand, 230 liters of water. Thus, while ensuring rational grain composition components can obtain the desired strength lightweight concrete based granshlaka plant Petrovsky, using as fillers

  5. Accelerator-based BNCT.

    Kreiner, A J; Baldo, M; Bergueiro, J R; Cartelli, D; Castell, W; Thatar Vento, V; Gomez Asoia, J; Mercuri, D; Padulo, J; Suarez Sandin, J C; Erhardt, J; Kesque, J M; Valda, A A; Debray, M E; Somacal, H R; Igarzabal, M; Minsky, D M; Herrera, M S; Capoulat, M E; Gonzalez, S J; del Grosso, M F; Gagetti, L; Suarez Anzorena, M; Gun, M; Carranza, O

    2014-06-01

    The activity in accelerator development for accelerator-based BNCT (AB-BNCT) both worldwide and in Argentina is described. Projects in Russia, UK, Italy, Japan, Israel, and Argentina to develop AB-BNCT around different types of accelerators are briefly presented. In particular, the present status and recent progress of the Argentine project will be reviewed. The topics will cover: intense ion sources, accelerator tubes, transport of intense beams, beam diagnostics, the (9)Be(d,n) reaction as a possible neutron source, Beam Shaping Assemblies (BSA), a treatment room, and treatment planning in realistic cases. © 2013 Elsevier Ltd. All rights reserved.

  6. Cellular based cancer vaccines

    Hansen, M; Met, Ö; Svane, I M

    2012-01-01

    Cancer vaccines designed to re-calibrate the existing host-tumour interaction, tipping the balance from tumor acceptance towards tumor control holds huge potential to complement traditional cancer therapies. In general, limited success has been achieved with vaccines composed of tumor...... to transiently affect in vitro migration via autocrine receptor-mediated endocytosis of CCR7. In the current review, we discuss optimal design of DC maturation focused on pre-clinical as well as clinical results from standard and polarized dendritic cell based cancer vaccines....

  7. WAP - based telemedicine applications

    Hung, K.; Zhang, Y.T.

    2001-01-01

    Telemedicine refers to the utilization of telecommunication technology for medical diagnosis, treatment, and patient care. Its aim is to provide expert-based health care to remote sites through telecommunication and information technologies. The significant advances in technologies have enabled the introduction of a broad range of telemedicine applications, which are supported by computer networks, wireless communication, and information superhighway. For example, some hospitals are using tele-radiology for remote consultation. Such a system includes medical imaging devices networked with computers and databases. Another growing area is patient monitoring, in which sensors are used to acquire biomedical signals, such as electrocardiogram (ECG), blood pressure, and body temperature, from a remote patient, who could be in bed or moving freely. The signals are then relayed to remote systems for viewing and analysis. Telemedicine can be divided into two basic modes of operations: real-time mode, in which the patient data can be accessed remotely in real-time, and store-and-forward mode, in which the acquired data does not have to be accessed immediately. In the recent years, many parties have demonstrated various telemedicine applications based on the Internet and cellular phone as these two fields have been developing rapidly. A current, recognizable trend in telecommunication is the convergence of wireless communication and computer network technologies. This has been reflected in recently developed telemedicine systems. For example, in 1998 J. Reponen, et al. have demonstrated transmission and display of computerized tomography (CT) examinations using a remote portable computer wirelessly connected to a computer network through TCP/IP on a GSM cellular phone. Two years later, they carried out the same tests with a GSM-based wireless personal digital assistant (PDA). The WAP (Wireless Application Protocol) Forum was founded in 1997 to create a global protocol

  8. Mars base buildup scenarios

    Blacic, J.D.

    1985-01-01

    Two surface base build-up scenarios are presented in order to help visualize the mission and to serve as a basis for trade studies. In the first scenario, direct manned landings on the Martian surface occur early in the missions and scientific investigation is the main driver and rationale. In the second scenario, early development of an infrastructure to exploite the volatile resources of the Martian moons for economic purposes is emphasized. Scientific exploration of the surface is delayed at first, but once begun develops rapidly aided by the presence of a permanently manned orbital station

  9. Agent-Based Optimization

    Jędrzejowicz, Piotr; Kacprzyk, Janusz

    2013-01-01

    This volume presents a collection of original research works by leading specialists focusing on novel and promising approaches in which the multi-agent system paradigm is used to support, enhance or replace traditional approaches to solving difficult optimization problems. The editors have invited several well-known specialists to present their solutions, tools, and models falling under the common denominator of the agent-based optimization. The book consists of eight chapters covering examples of application of the multi-agent paradigm and respective customized tools to solve  difficult optimization problems arising in different areas such as machine learning, scheduling, transportation and, more generally, distributed and cooperative problem solving.

  10. Refractive index based measurements

    2014-01-01

    In a method for performing a refractive index based measurement of a property of a fluid such as chemical composition or temperature by observing an apparent angular shift in an interference fringe pattern produced by back or forward scattering interferometry, ambiguities in the measurement caused...... by the apparent shift being consistent with one of a number of numerical possibilities for the real shift which differ by 2n are resolved by combining measurements performed on the same sample using light paths therethrough of differing lengths....

  11. Sustainability Base Construction Update

    Mewhinney, Michael

    2012-01-01

    Construction of the new Sustainability Base Collaborative support facility, expected to become the highest performing building in the federal government continues at NASA's Ames Research Center, Moffet Field, Calif. The new building is designed to achieve a platinum rating under the leadership in Energy and Environment Design (LEED) new construction standards for environmentally sustainable construction developed by the U. S. Green Building Council, Washington, D. C. When completed by the end of 2011, the $20.6 million building will feature near zero net energy consumption, use 90 percent less potable water than conventionally build buildings of equivalent size, and will result in reduced building maintenance costs.

  12. Chitosan-based nanocomposites

    Kesavan Pillai, Sreejarani

    2012-08-01

    Full Text Available , and hygiene devices. They thus represent a strong and emerging answer for improved and eco-friendly materials. This chapter reviews the recent developments in the area of chitosan-based nanocomposites, with a special emphasis on clay-containing nanocomposites...-sized mineral fillers like silica, talc, and clay are added to reduce the cost and improve chitosan’s performance in some way. However, the mechanical properties such as elongation at break and tensile strength of these composites decrease with the incorporation...

  13. Preparation and characterization of reinforced papers using nano bacterial cellulose.

    Tabarsa, Taghi; Sheykhnazari, Somayeh; Ashori, Alireza; Mashkour, Mahdi; Khazaeian, Abolghasem

    2017-08-01

    The main goal of this work was to reinforce softwood pulp (SP) with bacterial cellulose (BC) to generate a sustainable biocomposite. BC is a nanocellulose, which was anticipated to increase interfacial adhesion between the cellulosic fibers and BC. The organism used was Gluconacetobacter xylinus, which was incubated in a static Hestrin-Schramm culture at 28°C for 14days. The specimens of BC, SP and the reinforced SP with BC were characterized using X-ray diffraction (XRD), FT-IR, FESEM, and physico-mechanical testing. The crystallinity index was found to be 83 and 54% for BC and SP, respectively. FT-IR spectra showed that the composition of BC was fully different from that of SP fibers. Based on FESEM images, one can conclude that BC and softwood fibers do form a good combination with a nonporous structure. BC fibers fill in among the softwood fibers in the sheet. The physical and mechanical properties showed that as the dosage of BC increased, the properties of tensile index, tear index, and burst index greatly improved, while the porosity and the elongation decreased. The reason for the improved mechanical properties can be attributed to the increase of interfibrillar bonding which reduced porosity. This would be due to the high aspect ratio of BC that is capable of connecting between the cellulosic fibers and BC nanofibers, enhancing a large contact surface and therefore producing excellent coherence. This study suggests that BC could be a promising material for reinforcing composites at low loading. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Droplet based microfluidics

    Seemann, Ralf; Brinkmann, Martin; Pfohl, Thomas; Herminghaus, Stephan

    2012-01-01

    Droplet based microfluidics is a rapidly growing interdisciplinary field of research combining soft matter physics, biochemistry and microsystems engineering. Its applications range from fast analytical systems or the synthesis of advanced materials to protein crystallization and biological assays for living cells. Precise control of droplet volumes and reliable manipulation of individual droplets such as coalescence, mixing of their contents, and sorting in combination with fast analysis tools allow us to perform chemical reactions inside the droplets under defined conditions. In this paper, we will review available drop generation and manipulation techniques. The main focus of this review is not to be comprehensive and explain all techniques in great detail but to identify and shed light on similarities and underlying physical principles. Since geometry and wetting properties of the microfluidic channels are crucial factors for droplet generation, we also briefly describe typical device fabrication methods in droplet based microfluidics. Examples of applications and reaction schemes which rely on the discussed manipulation techniques are also presented, such as the fabrication of special materials and biophysical experiments.

  15. DVD Based Electronic Pulser

    Morris, Scott J.; Pratt, Rick M.; Hughes, Michael A.; Kouzes, Richard T.; Pitts, W K.; Robinson, Eric E.

    2005-01-01

    This paper describes the design, construction, and testing of a DVD based electronic pulser system (DVDEPS). Such a device is used to generate pulse streams for simulation of both gamma and neutron detector systems. The DVDEPS reproduces a random pulse stream of a full HPGe spectrum as well as a digital pulse stream representing the output of a neutron multiplicity detector. The exchangeable DVD media contains over an hour of data for both detector systems and can contain an arbitrary gamma spectrum and neutron pulse stream. The data is written to the DVD using a desktop computer program from either actual or simulated spectra. The targeted use of the DVDEPS is authentication or validation of monitoring equipment for non-proliferation purposes, but it is also of general use whenever a complex data stream is required. The DVD based pulser combines the storage capacity and simplicity of DVD technology with commonly available electronic components to build a relatively inexpensive yet highly capable testing instrument

  16. Evidence-based surgery

    Miran Rems

    2007-04-01

    Full Text Available Background: Surgery is setting a new ground by the reign of evidence that was brought up by the Evidence Based Medicine (EBM. While experiences and opinion of an expert count the least by the principles of EBM, randomized controlled trials (RCT and other comparative studies have gained their importance. Recommendations that were included in guidelines represent a demanding shift in surgeon’s professional thinking. Their thinking and classical education have not yet been completely based on the results of such studies and are still very very much master-pupil centred. Assessment of someone’s own experiences is threatened by objectivity as negative experiences get recorded in deeper memory. Randomized studies and meta-analyses do appear also in surgery. However, they demand an extra knowledge about critical assessment.Conclusions: Setting a patient to the foreground brings a surgeon’s decision to the field of EBM. The process has already begun and cannot be avoided. Decision hierarchy moves from the experience field to the evidence territory but to a lesser extent when compared to the rest of medicine. There exist objective restrictions with approving a new paradigm. However, these should not stop the process of EBM implementation. Finally, there is an ethic issue to be considered. Too slow activities in research, education and critical assessment can bring the surgeon to the position when a well-informed patient loses his/her trust.

  17. Microlaser-based displays

    Bergstedt, Robert; Fink, Charles G.; Flint, Graham W.; Hargis, David E.; Peppler, Philipp W.

    1997-07-01

    Laser Power Corporation has developed a new type of projection display, based upon microlaser technology and a novel scan architecture, which provides the foundation for bright, extremely high resolution images. A review of projection technologies is presented along with the limitations of each and the difficulties they experience in trying to generate high resolution imagery. The design of the microlaser based projector is discussed along with the advantage of this technology. High power red, green, and blue microlasers have been designed and developed specifically for use in projection displays. These sources, in combination with high resolution, high contrast modulator, produce a 24 bit color gamut, capable of supporting the full range of real world colors. The new scan architecture, which reduces the modulation rate and scan speeds required, is described. This scan architecture, along with the inherent brightness of the laser provides the fundamentals necessary to produce a 5120 by 4096 resolution display. The brightness and color uniformity of the display is excellent, allowing for tiling of the displays with far fewer artifacts than those in a traditionally tiled display. Applications for the display include simulators, command and control centers, and electronic cinema.

  18. SPACE BASED INTERCEPTOR SCALING

    G. CANAVAN

    2001-02-01

    Space Based Interceptor (SBI) have ranges that are adequate to address rogue ICBMs. They are not overly sensitive to 30-60 s delay times. Current technologies would support boost phase intercept with about 150 interceptors. Higher acceleration and velocity could reduce than number by about a factor of 3 at the cost of heavier and more expensive Kinetic Kill Vehicles (KKVs). 6g SBI would reduce optimal constellation costs by about 35%; 8g SBI would reduce them another 20%. Interceptor ranges fall rapidly with theater missile range. Constellations increase significantly for ranges under 3,000 km, even with advanced interceptor technology. For distributed launches, these estimates recover earlier strategic scalings, which demonstrate the improved absentee ratio for larger or multiple launch areas. Constellations increase with the number of missiles and the number of interceptors launched at each. The economic estimates above suggest that two SBI per missile with a modest midcourse underlay is appropriate. The SBI KKV technology would appear to be common for space- and surface-based boost phase systems, and could have synergisms with improved midcourse intercept and discrimination systems. While advanced technology could be helpful in reducing costs, particularly for short range theater missiles, current technology appears adequate for pressing rogue ICBM, accidental, and unauthorized launches.

  19. Challenge Based Innovation gala

    CERN. Geneva; Utriainen, Tuuli Maria; Toivonen, Harri; Nordberg, Markus

    2014-01-01

    Challenge Based Innovation gala   There’s a new experiment starting in CERN called IdeaLab where we work together with detector R&D researchers to help them to bridge their knowledge into a more human, societally oriented context. Currently we are located in B153, but will move our activities to a new facility next to the Globe in May 2014. One of our first pilot projects is a 5 month course CBI (Challenge Based Innovation) where two multidisciplinary student teams join forces with Edusafe & TALENT projects at CERN. Their goal is to discover what kind of tools for learning could be created in collaboration with the two groups. After months of user interviews and low resolution prototyping they are ready to share the results with us in the form of an afternoon gala. We warmly welcome you to join us to see the students' results and experience the prototypes they have conceived. The event is in three parts, you are welcome to visit all of them,...

  20. [Competence based medical education].

    Bernabó, Jorge G; Buraschi, Jorge; Olcese, Juan; Buraschi, María; Duro, Eduardo

    2007-01-01

    The strategy of curriculum planning in the majority of the Schools of Medicine has shifted, in the past years, from curriculum models based in contents to outcome oriented curricula. Coincidently the interest in defining and evaluating the clinical competences that a graduate must have has grown. In our country, and particularly in the Associated Hospitals belonging to the Unidad Regional de Enseñanza IV of the UBA School of Medicine, evidence has been gathered showing that the acquisition of clinical competences during the grade is in general insufficient. The foundations and characteristics of PREM (Programa de Requisitos Esenciales Mínimos) are described. PREM is a tool to promote the apprenticeship of abilities and necessary skills for the practice of medicine. The objective of the program is to promote the apprenticeship of a well defined list of core competences considered indispensable for a general practitioner. An outcome oriented curriculum with a clear definition of the expected knowledge, skills and attitudes of a graduate of the programme, the promotion of learning experiences centered in the practice and evaluation tools based in direct observation of the student's performance should contribute to close the gap between what the Medicine Schools traditionally teach and evaluate, and what the doctor needs to know and needs to do to perform correctly its profession.

  1. Constraint-based reachability

    Arnaud Gotlieb

    2013-02-01

    Full Text Available Iterative imperative programs can be considered as infinite-state systems computing over possibly unbounded domains. Studying reachability in these systems is challenging as it requires to deal with an infinite number of states with standard backward or forward exploration strategies. An approach that we call Constraint-based reachability, is proposed to address reachability problems by exploring program states using a constraint model of the whole program. The keypoint of the approach is to interpret imperative constructions such as conditionals, loops, array and memory manipulations with the fundamental notion of constraint over a computational domain. By combining constraint filtering and abstraction techniques, Constraint-based reachability is able to solve reachability problems which are usually outside the scope of backward or forward exploration strategies. This paper proposes an interpretation of classical filtering consistencies used in Constraint Programming as abstract domain computations, and shows how this approach can be used to produce a constraint solver that efficiently generates solutions for reachability problems that are unsolvable by other approaches.

  2. Metasurface-Based Polarimeters

    Fei Ding

    2018-04-01

    Full Text Available The state of polarization (SOP is an inherent property of light that can be used to gain crucial information about the composition and structure of materials interrogated with light. However, the SOP is difficult to experimentally determine since it involves phase information between orthogonal polarization states, and is uncorrelated with the light intensity and frequency, which can be easily determined with photodetectors and spectrometers. Rapid progress on optical gradient metasurfaces has resulted in the development of conceptually new approaches to the SOP characterization. In this paper, we review the fundamentals of and recent developments within metasurface-based polarimeters. Starting by introducing the concepts of generalized Snell’s law and Stokes parameters, we explain the Pancharatnam–Berry phase (PB-phase which is instrumental for differentiating between orthogonal circular polarizations. Then we review the recent progress in metasurface-based polarimeters, including polarimeters, spectropolarimeters, orbital angular momentum (OAM spectropolarimeters, and photodetector integrated polarimeters. The review is ended with a short conclusion and perspective for future developments.

  3. Risk-based safety indicators

    Szikszai, T.

    1997-01-01

    The presentation discusses the following issues: The objectives of the risk-based indicator programme. The characteristics of the risk-based indicators. The objectives of risk-based safety indicators - in monitoring safety; in PSA applications. What indicators? How to produce the risk based indicators? PSA requirements

  4. MS Based Metabonomics

    Want, Elizabeth J.; Metz, Thomas O.

    2010-03-01

    Metabonomics is the latest and least mature of the systems biology triad, which also includes genomics and proteomics, and has its origins in the early orthomolecular medicine work pioneered by Linus Pauling and Arthur Robinson. It was defined by Nicholson and colleagues in 1999 as the quantitative measurement of perturbations in the metabolite complement of an integrated biological system in response to internal or external stimuli, and is often used today to describe many non-global types of metabolite analyses. Applications of metabonomics are extensive and include toxicology, nutrition, pharmaceutical research and development, physiological monitoring and disease diagnosis. For example, blood samples from millions of neonates are tested routinely by mass spectrometry (MS) as a diagnostic tool for inborn errors of metabolism. The metabonome encompasses a wide range of structurally diverse metabolites; therefore, no single analytical platform will be sufficient. Specialized sample preparation and detection techniques are required, and advances in NMR and MS technologies have led to enhanced metabonome coverage, which in turn demands improved data analysis approaches. The role of MS in metabonomics is still evolving as instrumentation and software becomes more sophisticated and as researchers realize the strengths and limitations of current technology. MS offers a wide dynamic range, high sensitivity, and reproducible, quantitative analysis. These attributes are essential for addressing the challenges of metabonomics, as the range of metabolite concentrations easily exceeds nine orders of magnitude in biofluids, and the diversity of molecular species ranges from simple amino and organic acids to lipids and complex carbohydrates. Additional challenges arise in generating a comprehensive metabolite profile, downstream data processing and analysis, and structural characterization of important metabolites. A typical workflow of MS-based metabonomics is shown in Figure

  5. Skull base tumor model.

    Gragnaniello, Cristian; Nader, Remi; van Doormaal, Tristan; Kamel, Mahmoud; Voormolen, Eduard H J; Lasio, Giovanni; Aboud, Emad; Regli, Luca; Tulleken, Cornelius A F; Al-Mefty, Ossama

    2010-11-01

    Resident duty-hours restrictions have now been instituted in many countries worldwide. Shortened training times and increased public scrutiny of surgical competency have led to a move away from the traditional apprenticeship model of training. The development of educational models for brain anatomy is a fascinating innovation allowing neurosurgeons to train without the need to practice on real patients and it may be a solution to achieve competency within a shortened training period. The authors describe the use of Stratathane resin ST-504 polymer (SRSP), which is inserted at different intracranial locations to closely mimic meningiomas and other pathological entities of the skull base, in a cadaveric model, for use in neurosurgical training. Silicone-injected and pressurized cadaveric heads were used for studying the SRSP model. The SRSP presents unique intrinsic metamorphic characteristics: liquid at first, it expands and foams when injected into the desired area of the brain, forming a solid tumorlike structure. The authors injected SRSP via different passages that did not influence routes used for the surgical approach for resection of the simulated lesion. For example, SRSP injection routes included endonasal transsphenoidal or transoral approaches if lesions were to be removed through standard skull base approach, or, alternatively, SRSP was injected via a cranial approach if the removal was planned to be via the transsphenoidal or transoral route. The model was set in place in 3 countries (US, Italy, and The Netherlands), and a pool of 13 physicians from 4 different institutions (all surgeons and surgeons in training) participated in evaluating it and provided feedback. All 13 evaluating physicians had overall positive impressions of the model. The overall score on 9 components evaluated--including comparison between the tumor model and real tumor cases, perioperative requirements, general impression, and applicability--was 88% (100% being the best possible

  6. Plasma based accelerators

    Caldwell, Allen [Max-Planck-Institut fuer Physik, Muenchen (Germany)

    2015-05-01

    The concept of laser-induced plasma wakefields as a technique to accelerate charged particles was introduced 35 years ago as a means to go beyond the accelerating gradients possible with metallic cavities supporting radio frequency electromagnetic fields. Significant developments in laser technology have made possible the pulse intensity needed to realize this concept, and rapid progress is now underway in the realization of laser-driven plasma wakefield acceleration. It has also been realized that similar accelerating gradients can be produced by particle beams propagating in plasmas, and experimental programs have also been undertaken to study this possibility. Positive results have been achieved with electron-driven plasma wakefields, and a demonstration experiment with proton-driven wakefields is under construction at CERN. The concepts behind these different schemes and their pros and cons are described, as well as the experimental results achieved. An outlook for future practical uses of plasma based accelerators will also be given.

  7. Gossip-Based Broadcast

    Leitão, João; Pereira, José; Rodrigues, Luís

    Gossip, or epidemic, protocols have emerged as a powerful strategy to implement highly scalable and resilient reliable broadcast primitives on large scale peer-to-peer networks. Epidemic protocols are scalable because they distribute the load among all nodes in the system and resilient because they have an intrinsic level of redundancy that masks node and network failures. This chapter provides an introduction to gossip-based broadcast on large-scale unstructured peer-to-peer overlay networks: it surveys the main results in the field, discusses techniques to build and maintain the overlays that support efficient dissemination strategies, and provides an in-depth discussion and experimental evaluation of two concrete protocols, named HyParView and Plumtree.

  8. Sensory bases of navigation.

    Gould, J L

    1998-10-08

    Navigating animals need to know both the bearing of their goal (the 'map' step), and how to determine that direction (the 'compass' step). Compasses are typically arranged in hierarchies, with magnetic backup as a last resort when celestial information is unavailable. Magnetic information is often essential to calibrating celestial cues, though, and repeated recalibration between celestial and magnetic compasses is important in many species. Most magnetic compasses are based on magnetite crystals, but others make use of induction or paramagnetic interactions between short-wavelength light and visual pigments. Though odors may be used in some cases, most if not all long-range maps probably depend on magnetite. Magnetitebased map senses are used to measure only latitude in some species, but provide the distance and direction of the goal in others.

  9. Graphene based biosensors

    Gürel, Hikmet Hakan, E-mail: hhakan.gurel@kocaeli.edu.tr [Kocaeli University, Kocaeli (Turkey); Salmankurt, Bahadır [Sakarya University, Sakarya (Turkey)

    2016-03-25

    Nanometer-sized graphene as a 2D material has unique chemical and electronic properties. Because of its unique physical, chemical, and electronic properties, its interesting shape and size make it a promising nanomaterial in many biological applications. It is expected that biomaterials incorporating graphene will be developed for the graphene-based drug delivery systems and biomedical devices. The interactions of biomolecules and graphene are long-ranged and very weak. Development of new techniques is very desirable for design of bioelectronics sensors and devices. In this work, we present first-principles calculations within density functional theory to calculate effects of charging on nucleobases on graphene. It is shown that how modify structural and electronic properties of nucleobases on graphene by applied charging.

  10. Integrated data base program

    Notz, K.J.

    1981-01-01

    The IDB Program provides direct support to the DOE Nuclear Waste Management and Fuel Cycle Programs and their lead sites and support contractors by providing and maintaining a current, integrated data base of spent fuel and radioactive waste inventories and projections. All major waste types (HLW, TRU, and LLW) and sources (government, commerical fuel cycle, and I/I) are included. A major data compilation was issued in September, 1981: Spent Fuel and Radioactive Waste Inventories and Projections as of December 31, 1980, DOE/NE-0017. This report includes chapters on Spent Fuel, HLW, TRU Waste, LLW, Remedial Action Waste, Active Uranium Mill Tailings, and Airborne Waste, plus Appendices with more detailed data in selected areas such as isotopics, radioactivity, thermal power, projections, and land usage. The LLW sections include volumes, radioactivity, thermal power, current inventories, projected inventories and characteristics, source terms, land requirements, and a breakdown in terms of government/commercial and defense/fuel cycle/I and I

  11. Nickel base alloys

    Gibson, R.C.; Korenko, M.K.

    1980-01-01

    Nickel based alloy, the characteristic of which is that it mainly includes in percentages by weight: 57-63 Ni, 7-18 Cr, 10-20 Fe, 4-6 Mo, 1-2 Nb, 0.2-0.8 Si, 0.01-0.05 Zr, 1.0-2.5 Ti, 1.0-2.5 Al, 0.02-0.06 C and 0.002-0.015 B. The aim is to create new nickel-chromium alloys, hardened in a solid solution and by precipitation, that are stable, exhibit reduced swelling and resistant to plastic deformation inside the reactor. These alloys of the gamma prime type have improved mechanical strengthm swelling resistance, structural stability and welding properties compared with Inconel 625 [fr

  12. Rate based failure detection

    Johnson, Brett Emery Trabun; Gamage, Thoshitha Thanushka; Bakken, David Edward

    2018-01-02

    This disclosure describes, in part, a system management component and failure detection component for use in a power grid data network to identify anomalies within the network and systematically adjust the quality of service of data published by publishers and subscribed to by subscribers within the network. In one implementation, subscribers may identify a desired data rate, a minimum acceptable data rate, desired latency, minimum acceptable latency and a priority for each subscription. The failure detection component may identify an anomaly within the network and a source of the anomaly. Based on the identified anomaly, data rates and or data paths may be adjusted in real-time to ensure that the power grid data network does not become overloaded and/or fail.

  13. Behavior based safety

    Sudhikumaran, T.V.; Mehta, S.C.; Goyal, D.K.

    2009-01-01

    Behaviour Based Safety (popularly known as BBS) is a new methodology for achieving injury free work place and total Safety Culture. BBS is successfully being implemented and is being practiced as a work methodology for achieving a loss and injury free work environment and work practice. Through BBS, it was brought out that the root causes of all Industrial accidents some how originate from the 'at risk' behaviour of some individual or group of individuals at some level. The policy of NPCIL is to excel in the field of Industrial and Fire Safety in comparison to international standards. This article indents to bring out the various parameters helping in installing BBS programme at any plant. (author)

  14. Fuel cycle based safeguards

    De Montmollin, J.M.; Higinbotham, W.A.; Gupta, D.

    1985-07-01

    In NPT safeguards the same model approach and absolute-quantity inspection goals are applied at present to all similar facilities, irrespective of the State's fuel cycle. There is a continuing interest and activity on the part of the IAEA in new NPT safeguards approaches that more directly address a State's nuclear activities as a whole. This fuel cycle based safeguards system is expected to a) provide a statement of findings for the entire State rather than only for individual facilities; b) allocate inspection efforts so as to reflect more realistically the different categories of nuclear materials in the different parts of the fuel cycle and c) provide more timely and better coordinated information on the inputs, outputs and inventories of nuclear materials in a State. (orig./RF) [de

  15. Bases para proyectiles dirigidos

    Editorial, Equipo

    1959-03-01

    Full Text Available Aunque actualmente no se ha llegado a una línea general de métodos o sistemas que gobiernen un tipo característico de rampa y servicios auxiliares necesarios para el lanzamiento al espacio de proyectiles dirigidos a grandes alturas y distancias, las experiencias obtenidas en diferentes ensayos, utilizando distintos tipos de proyectiles y trayectorias balísticas, han sentado toda una serie de procedimientos, datos y conclusiones de gran valor balístico que, aun teniendo en cuenta la continua evolución del proyectil, sus formas, combustibles y alcances, se conocen ya, con bastante aproximación, las condiciones mínimas que ha de reunir una base dedicada a este tipo de lanzamientos.

  16. Situation based housing

    Duelund Mortensen, Peder; Welling, Helen; Wiell Nordberg, Lene

    2007-01-01

    of the average family's lifestyle. These dwellings were ground-breaking when they were built, but today are clearly a product of their time. The reaction to functionalism and the postwar mass production gave rise to flexible dwelling with countless possibilities for room division. The housing of this period has...... characteristics which in the long run have proven to be unfortunate both in terms in terms of durability and architectural quality. Today there is a focus on the development of more open and functionally non-determined housing. A number of new housing schemes in and around Copenhagen reveal a variety...... of approaches to these goals. This working paper reviews not only a selection of new housing types, but also dwellings from the past, which each contain an aspect of changeability. Our study is based on information from users in the selected housing schemes, gathered from questionnaires, information about...

  17. Liaison based assembly design

    Ames, A.; Kholwadwala, D.; Wilson, R.H.

    1996-12-01

    Liaison Based Assembly Design extends the current information infrastructure to support design in terms of kinematic relationships between parts, or liaisons. These liaisons capture information regarding contact, degrees-of-freedom constraints and containment relationships between parts in an assembly. The project involved defining a useful collection of liaison representations, investigating their properties, and providing for maximum use of the data in downstream applications. We tested our ideas by implementing a prototype system involving extensions to Pro/Engineer and the Archimedes assembly planner. With an expanded product model, the design system is more able to capture design intent. When a product update is attempted, increased knowledge availability improves our ability to understand the effect of design changes. Manufacturing and analysis disciplines benefit from having liaison information available, so less time is wasted arguing over incomplete design specifications and our enterprise can be more completely integrated.

  18. Touching base with OPERA

    CERN Bulletin

    2011-01-01

    Three seminars – at CERN, at Gran Sasso and in Japan – and an article calling for the scrutiny of the scientific community: the OPERA Collaboration opened its research publicly. In addition to huge press coverage, this triggered welcome reactions from colleagues around the world, many of whom will attempt to independently interpret and reproduce the measurement. OPERA’s Spokesperson touches base with the Bulletin.   The CERN Main Auditorium was crowded as OPERA Physics co-ordinator Dario Autiero presented the results of their research (23 September 2011). According to the OPERA strategy, the results of the measurements are in the hands of the scientific community and, as for any other scientific result, several months will be needed before other groups will be able to perform an independent measurement. In the meantime, the OPERA Collaboration is dealing with an avalanche of emails from the scientific community, members of the general public, and the press. &...

  19. Pathway-based analyses.

    Kent, Jack W

    2016-02-03

    New technologies for acquisition of genomic data, while offering unprecedented opportunities for genetic discovery, also impose severe burdens of interpretation and penalties for multiple testing. The Pathway-based Analyses Group of the Genetic Analysis Workshop 19 (GAW19) sought reduction of multiple-testing burden through various approaches to aggregation of highdimensional data in pathways informed by prior biological knowledge. Experimental methods testedincluded the use of "synthetic pathways" (random sets of genes) to estimate power and false-positive error rate of methods applied to simulated data; data reduction via independent components analysis, single-nucleotide polymorphism (SNP)-SNP interaction, and use of gene sets to estimate genetic similarity; and general assessment of the efficacy of prior biological knowledge to reduce the dimensionality of complex genomic data. The work of this group explored several promising approaches to managing high-dimensional data, with the caveat that these methods are necessarily constrained by the quality of external bioinformatic annotation.

  20. Refractive index based measurements

    2014-01-01

    A refractive index based measurement of a property of a fluid is measured in an apparatus comprising a variable wavelength coherent light source (16), a sample chamber (12), a wavelength controller (24), a light sensor (20), a data recorder (26) and a computation apparatus (28), by - directing...... coherent light having a wavelength along an input light path, - producing scattering of said light from each of a plurality of interfaces within said apparatus including interfaces between said fluid and a surface bounding said fluid, said scattering producing an interference pattern formed by said...... scattered light, - cyclically varying the wavelength of said light in said input light path over a 1 nm to 20nm wide range of wavelengths a rate of from 10Hz to 50 KHz, - recording variation of intensity of the interfering light with change in wavelength of the light at an angle of observation...

  1. Transaction based approach

    Hunka, Frantisek; Matula, Jiri

    2017-07-01

    Transaction based approach is utilized in some methodologies in business process modeling. Essential parts of these transactions are human beings. The notion of agent or actor role is usually used for them. The paper on a particular example describes possibilities of Design Engineering Methodology for Organizations (DEMO) and Resource-Event-Agent (REA) methodology. Whereas the DEMO methodology can be regarded as a generic methodology having its foundation in the theory of Enterprise Ontology the REA methodology is regarded as the domain specific methodology and has its origin in accountancy systems. The results of these approaches is that the DEMO methodology captures everything that happens in the reality with a good empirical evidence whereas the REA methodology captures only changes connected with economic events. Economic events represent either change of the property rights to economic resource or consumption or production of economic resources. This results from the essence of economic events and their connection to economic resources.

  2. Pitch Based Sound Classification

    Nielsen, Andreas Brinch; Hansen, Lars Kai; Kjems, U

    2006-01-01

    A sound classification model is presented that can classify signals into music, noise and speech. The model extracts the pitch of the signal using the harmonic product spectrum. Based on the pitch estimate and a pitch error measure, features are created and used in a probabilistic model with soft......-max output function. Both linear and quadratic inputs are used. The model is trained on 2 hours of sound and tested on publicly available data. A test classification error below 0.05 with 1 s classification windows is achieved. Further more it is shown that linear input performs as well as a quadratic......, and that even though classification gets marginally better, not much is achieved by increasing the window size beyond 1 s....

  3. Telephone-Based Coaching.

    Boccio, Mindy; Sanna, Rashel S; Adams, Sara R; Goler, Nancy C; Brown, Susan D; Neugebauer, Romain S; Ferrara, Assiamira; Wiley, Deanne M; Bellamy, David J; Schmittdiel, Julie A

    2017-03-01

    Many Americans continue to smoke, increasing their risk of disease and premature death. Both telephone-based counseling and in-person tobacco cessation classes may improve access for smokers seeking convenient support to quit. Little research has assessed whether such programs are effective in real-world clinical populations. Retrospective cohort study comparing wellness coaching participants with two groups of controls. Kaiser Permanente Northern California, a large integrated health care delivery system. Two hundred forty-one patients who participated in telephonic tobacco cessation coaching from January 1, 2011, to March 31, 2012, and two control groups: propensity-score-matched controls, and controls who participated in a tobacco cessation class during the same period. Wellness coaching participants received an average of two motivational interviewing-based coaching sessions that engaged the patient, evoked their reason to consider quitting, and helped them establish a quit plan. Self-reported quitting of tobacco and fills of tobacco cessation medications within 12 months of follow-up. Logistic regressions adjusting for age, gender, race/ethnicity, and primary language. After adjusting for confounders, tobacco quit rates were higher among coaching participants vs. matched controls (31% vs. 23%, p Coaching participants and class attendees filled tobacco-cessation prescriptions at a higher rate (47% for both) than matched controls (6%, p coaching was as effective as in-person classes and was associated with higher rates of quitting compared to no treatment. The telephonic modality may increase convenience and scalability for health care systems looking to reduce tobacco use and improve health.

  4. Model Based Temporal Reasoning

    Rabin, Marla J.; Spinrad, Paul R.; Fall, Thomas C.

    1988-03-01

    Systems that assess the real world must cope with evidence that is uncertain, ambiguous, and spread over time. Typically, the most important function of an assessment system is to identify when activities are occurring that are unusual or unanticipated. Model based temporal reasoning addresses both of these requirements. The differences among temporal reasoning schemes lies in the methods used to avoid computational intractability. If we had n pieces of data and we wanted to examine how they were related, the worst case would be where we had to examine every subset of these points to see if that subset satisfied the relations. This would be 2n, which is intractable. Models compress this; if several data points are all compatible with a model, then that model represents all those data points. Data points are then considered related if they lie within the same model or if they lie in models that are related. Models thus address the intractability problem. They also address the problem of determining unusual activities if the data do not agree with models that are indicated by earlier data then something out of the norm is taking place. The models can summarize what we know up to that time, so when they are not predicting correctly, either something unusual is happening or we need to revise our models. The model based reasoner developed at Advanced Decision Systems is thus both intuitive and powerful. It is currently being used on one operational system and several prototype systems. It has enough power to be used in domains spanning the spectrum from manufacturing engineering and project management to low-intensity conflict and strategic assessment.

  5. Mainstreaming gesture based interfaces

    David Procházka

    2013-01-01

    Full Text Available Gestures are a common way of interaction with mobile devices. They emerged especially with the iPhone production. Gestures in currently used devices are usually based on the original gestures presented by Apple in its iOS (iPhone Operating System. Therefore, there is a wide agreement on the mobile gesture design. In last years, it is possible to see experiments with gesture usage also in the other areas of consumer electronics and computers. The examples can include televisions, large projections etc. These gestures can be marked as spatial or 3D gestures. They are connected with a natural 3D environment rather than with a flat 2D screen. Nevertheless, it is hard to find a comparable design agreement within the spatial gestures. Various projects are based on completely different gesture sets. This situation is confusing for their users and slows down spatial gesture adoption.This paper is focused on the standardization of spatial gestures. The review of projects focused on spatial gesture usage is provided in the first part. The main emphasis is placed on the usability point-of-view. On the basis of our analysis, we argue that the usability is the key issue enabling the wide adoption. The mobile gesture emergence was possible easily because the iPhone gestures were natural. Therefore, it was not necessary to learn them.The design and implementation of our presentation software, which is controlled by gestures, is outlined in the second part of the paper. Furthermore, the usability testing results are provided as well. We have tested our application on a group of users not instructed in the implemented gestures design. These results were compared with the other ones, obtained with our original implementation. The evaluation can be used as the basis for implementation of similar projects.

  6. DNA-based machines.

    Wang, Fuan; Willner, Bilha; Willner, Itamar

    2014-01-01

    The base sequence in nucleic acids encodes substantial structural and functional information into the biopolymer. This encoded information provides the basis for the tailoring and assembly of DNA machines. A DNA machine is defined as a molecular device that exhibits the following fundamental features. (1) It performs a fuel-driven mechanical process that mimics macroscopic machines. (2) The mechanical process requires an energy input, "fuel." (3) The mechanical operation is accompanied by an energy consumption process that leads to "waste products." (4) The cyclic operation of the DNA devices, involves the use of "fuel" and "anti-fuel" ingredients. A variety of DNA-based machines are described, including the construction of "tweezers," "walkers," "robots," "cranes," "transporters," "springs," "gears," and interlocked cyclic DNA structures acting as reconfigurable catenanes, rotaxanes, and rotors. Different "fuels", such as nucleic acid strands, pH (H⁺/OH⁻), metal ions, and light, are used to trigger the mechanical functions of the DNA devices. The operation of the devices in solution and on surfaces is described, and a variety of optical, electrical, and photoelectrochemical methods to follow the operations of the DNA machines are presented. We further address the possible applications of DNA machines and the future perspectives of molecular DNA devices. These include the application of DNA machines as functional structures for the construction of logic gates and computing, for the programmed organization of metallic nanoparticle structures and the control of plasmonic properties, and for controlling chemical transformations by DNA machines. We further discuss the future applications of DNA machines for intracellular sensing, controlling intracellular metabolic pathways, and the use of the functional nanostructures for drug delivery and medical applications.

  7. Base Research Program

    Everett Sondreal; John Hendrikson

    2009-03-31

    In June 2009, the Energy & Environmental Research Center (EERC) completed 11 years of research under the U.S. Department of Energy (DOE) Base Cooperative Agreement No. DE-FC26-98FT40320 funded through the Office of Fossil Energy (OFE) and administered at the National Energy Technology Laboratory (NETL). A wide range of diverse research activities were performed under annual program plans approved by NETL in seven major task areas: (1) resource characterization and waste management, (2) air quality assessment and control, (3) advanced power systems, (4) advanced fuel forms, (5) value-added coproducts, (6) advanced materials, and (7) strategic studies. This report summarizes results of the 67 research subtasks and an additional 50 strategic studies. Selected highlights in the executive summary illustrate the contribution of the research to the energy industry in areas not adequately addressed by the private sector alone. During the period of performance of the agreement, concerns have mounted over the impact of carbon emissions on climate change, and new programs have been initiated by DOE to ensure that fossil fuel resources along with renewable resources can continue to supply the nation's transportation fuel and electric power. The agreement has addressed DOE goals for reductions in CO{sub 2} emissions through efficiency, capture, and sequestration while expanding the supply and use of domestic energy resources for energy security. It has further contributed to goals for near-zero emissions from highly efficient coal-fired power plants; environmental control capabilities for SO{sub 2}, NO{sub x}, fine respirable particulate (PM{sub 2.5}), and mercury; alternative transportation fuels including liquid synfuels and hydrogen; and synergistic integration of fossil and renewable resources (e.g., wind-, biomass-, and coal-based electrical generation).

  8. The office based CHIVA

    Passariello F

    2013-09-01

    Full Text Available Fausto Passariello,1 Stefano Ermini,2 Massimo Cappelli,3 Roberto Delfrate,4 Claude Franceschi5 1Centro Diagnostico Aquarius, Napoli, Italy; 2Private Practice, Grassina, Italy; 3Private Practice, Firenze, Italy; 4Casa di Cure Figlie di Maria, Cremona, Italy; 5Hospital St Joseph, Service d'Explorations Vasculaires, Paris, France Abstract: The cure Conservatrice Hémodynamique de l'Insuffisance Veineuse en Ambulatoire (CHIVA can be office based (OB. The OB-CHIVA protocol is aimed at transferring CHIVA procedures to specialists rooms. The protocol will check the feasibility of OB-CHIVA, data pertaining to recurrence, and will offer the opportunity to study saphenous femoral junction (SFJ stump evolution, the role of the washing vessels and the arch recanalization rate, and gather new data about the effect of the length of the treated saphenous vein. A simplified diagnostic procedure will allow an essential ultrasound examination of the venous net while a schematic and easily readable algorithm guides therapeutic choices. The Riobamba draining crossotomy (RDC tactic is composed of a set of OB procedures. While some of these procedures are, at the moment, only proposals, others are already applied. Devices generally used in ablative procedures such as Light Amplification by Stimulated Emission of Radiation (LASER, radio frequency, steam, and mechanical devices are used in this context to serve to conservative interventions for CHIVA. New techniques have also been proposed for devalvulation and tributary disconnection. Detailed follow-up is necessary in order to determine the effects of therapy and possible disease evolution. Finally, information is added about the informed consent and the ethical considerations of OB-CHIVA research. Keywords: CHIVA, office based procedures, LASER, RF, steam

  9. Organic Biochar Based Fertilization

    Schmidt, Hans-Peter; Pandit, Bishnu Hari; Cornelissen, Gerard; Kammann, Claudia

    2017-04-01

    Biochar produced in cost-efficient flame curtain kilns (Kon-Tiki) was nutrient enriched either with cow urine or with dissolved mineral (NPK) fertilizer to produce biochar-based fertilizers containing between 60-100 kg N, 5-60 kg P2O5 and 60-100 kg K2O, respectively, per ton of biochar. In 21 field trials nutrient-enriched biochars were applied at rates of 0.5 to 2 t ha-1 into the root zone of 13 different annual and perennial crops. Treatments combining biochar, compost and organic or chemical fertilizer were evaluated; control treatments contained the same amounts of nutrients but without biochar. All nutrient-enriched biochar substrates improved yields compared to their respective no-biochar controls. Biochar enriched with dissolved NPK produced on average 20% ± 5.1% (N=4) higher yields than standard NPK fertilization without biochar. Cow urine-enriched biochar blended with compost resulted on average in 123% ± 76.7% (N=13) higher yields compared to the organic farmer practice with cow urine-blended compost and outcompeted NPK-enriched biochar (same nutrient dose) by 103% ± 12.4% (N=4) on average. 21 field trials robustly revealed that low-dosage root zone application of organic biochar-based fertilizers caused substantial yield increases in rather fertile silt loam soils compared to traditional organic fertilization and to mineral NPK- or NPK-biochar fertilization. This can likely be explained by the nutrient carrier effect of biochar causing a slow nutrient release behavior, more balanced nutrient fluxes and reduced nutrient losses especially when liquid organic nutrients are used for the biochar enrichment. The results promise new pathways for optimizing organic farming and improving on-farm nutrient cycling.

  10. Loyalty-based management.

    Reichheld, F F

    1993-01-01

    Despite a flurry of activities aimed at serving customers better, few companies have systematically revamped their operations with customer loyalty in mind. Instead, most have adopted improvement programs ad hoc, and paybacks haven't materialized. Building a highly loyal customer base must be integral to a company's basic business strategy. Loyalty leaders like MBNA credit cards are successful because they have designed their entire business systems around customer loyalty--a self-reinforcing system in which the company delivers superior value consistently and reinvents cash flows to find and keep high-quality customers and employees. The economic benefits of high customer loyalty are measurable. When a company consistently delivers superior value and wins customer loyalty, market share and revenues go up, and the cost of acquiring new customers goes down. The better economics mean the company can pay workers better, which sets off a whole chain of events. Increased pay boosts employee moral and commitment; as employees stay longer, their productivity goes up and training costs fall; employees' overall job satisfaction, combined with their experience, helps them serve customers better; and customers are then more inclined to stay loyal to the company. Finally, as the best customers and employees become part of the loyalty-based system, competitors are left to survive with less desirable customers and less talented employees. To compete on loyalty, a company must understand the relationships between customer retention and the other parts of the business--and be able to quantify the linkages between loyalty and profits. It involves rethinking and aligning four important aspects of the business: customers, product/service offering, employees, and measurement systems.

  11. One-Pot Process for Hydrodeoxygenation of Lignin to Alkanes Using Ru-Based Bimetallic and Bifunctional Catalysts Supported on Zeolite Y.

    Wang, Hongliang; Ruan, Hao; Feng, Maoqi; Qin, Yuling; Job, Heather; Luo, Langli; Wang, Chongmin; Engelhard, Mark H; Kuhn, Erik; Chen, Xiaowen; Tucker, Melvin P; Yang, Bin

    2017-04-22

    The synthesis of high-efficiency and low-cost catalysts for hydrodeoxygenation (HDO) of waste lignin to advanced biofuels is crucial for enhancing current biorefinery processes. Inexpensive transition metals, including Fe, Ni, Cu, and Zn, were severally co-loaded with Ru on HY zeolite to form bimetallic and bifunctional catalysts. These catalysts were subsequently tested for HDO conversion of softwood lignin and several lignin model compounds. Results indicated that the inexpensive earth-abundant metals could modulate the hydrogenolysis activity of Ru and decrease the yield of low-molecular-weight gaseous products. Among these catalysts, Ru-Cu/HY showed the best HDO performance, affording the highest selectivity to hydrocarbon products. The improved catalytic performance of Ru-Cu/HY was probably a result of the following three factors: (1) high total and strong acid sites, (2) good dispersion of metal species and limited segregation, and (3) high adsorption capacity for polar fractions, including hydroxyl groups and ether bonds. Moreover, all bifunctional catalysts proved to be superior over the combination catalysts of Ru/Al 2 O 3 and HY zeolite. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. One-Pot Process for Hydrodeoxygenation of Lignin to Alkanes Using Ru-Based Bimetallic and Bifunctional Catalysts Supported on Zeolite Y

    Wang, Hongliang [Department of Biological Systems Engineering, Washington State University, Richland WA 99354 USA; Ruan, Hao [Department of Biological Systems Engineering, Washington State University, Richland WA 99354 USA; Feng, Maoqi [Chemistry & Chemical Engineering Division, Southwest Research Institute, San Antonio TX 78238 USA; Qin, Yuling [Department of Biological Systems Engineering, Washington State University, Richland WA 99354 USA; Job, Heather [Pacific Northwest National Laboratory, 902 Battelle Blvd Richland WA 99354 USA; Luo, Langli [Environmental Molecular Sciences Laboratory, 3335 Q Ave Richland WA 99354 USA; Wang, Chongmin [Environmental Molecular Sciences Laboratory, 3335 Q Ave Richland WA 99354 USA; Engelhard, Mark H. [Environmental Molecular Sciences Laboratory, 3335 Q Ave Richland WA 99354 USA; Kuhn, Erik [National Bioenergy Center, National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO. 80401 USA; Chen, Xiaowen [National Bioenergy Center, National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO. 80401 USA; Tucker, Melvin P. [National Bioenergy Center, National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO. 80401 USA; Yang, Bin [Department of Biological Systems Engineering, Washington State University, Richland WA 99354 USA

    2017-03-16

    The synthesis of high-efficiency and low-cost multifunctional catalysts for hydrodeoxygenation (HDO) of waste lignin into advanced biofuels is crucial for enhancing current biorefinery processes. Inexpensive transition metals, including Fe, Ni, Cu, Zn, were severally co-loaded with Ru on HY zeolite to form bimetallic and bifunctional catalysts. These catalysts were subsequently tested for HDO conversion of softwood lignin and several lignin model compounds. Results indicated that the inexpensive earth abundant metals could modulate the hydrogenolysis activity of Ru and decrease the yield of low molecular weight gaseous side-products. Among all the prepared catalysts, Ru-Cu/HY showed the best HDO performance, giving the highest selectivity to hydrocarbon products. The improved catalytic performance of Ru-Cu/HY was probably due to the following three factors: (1) high total and strong acid sites, (2) good dispersion of metal species and limited segregation, (3) high adsorption capacity for polar fractions, including hydroxyl groups and ether bonds. Moreover, all the bifunctional catalysts were proven to be superior over the combination catalysts of Ru/Al2O3 and HY zeolite, and this could be attributed to the “intimacy criterion”. The practical use of the designed catalysts would be promising in lignin valorization.

  13. Foundry based approach for InP based PIC development

    Smit, M.K.

    2014-01-01

    Europe is making significant investments in development of generic photonic foundry platform infrastructures for InP-based and Silicon Photonic ICs. Here we present the present status for the InP-based JePPIX platform.

  14. NMR studies concerning base-base interactions in oligonucleotides

    Hoogen, Y.T. van den.

    1988-01-01

    Two main subjects are treated in the present thesis. The firsst part principally deals with the base-base interactions in single-stranded oligoribonucleotides. The second part presents NMR and model-building studies of DNA and RNA duplexes containing an unpaired base. (author). 242 refs.; 26 figs.; 24 tabs

  15. Computer-based multi-channel analyzer based on internet

    Zhou Xinzhi; Ning Jiaoxian

    2001-01-01

    Combined the technology of Internet with computer-based multi-channel analyzer, a new kind of computer-based multi-channel analyzer system which is based on browser is presented. Its framework and principle as well as its implementation are discussed

  16. Base Camp Architecture

    Warebi Gabriel Brisibe

    2016-03-01

    Full Text Available Longitudinal or time line studies of change in the architecture of a particular culture are common, but an area still open to further research is change across space or place. In particular, there is need for studies on architectural change of cultures stemming from the same ethnic source split between their homeland and other Diasporas. This change may range from minor deviations to drastic shifts away from an architectural norm and the accumulation of these shifts within a time frame constitutes variations. This article focuses on identifying variations in the architecture of the Ijo fishing group that migrates along the coastline of West Africa. It examines the causes of cross-cultural variation between base camp dwellings of Ijo migrant fishermen in the Bakassi Peninsula in Cameroon and Bayelsa State in Nigeria. The study draws on the idea of the inevitability of cultural and social change over time as proposed in the theories of cultural dynamism and evolution. It tests aspects of cultural transmission theory using the principal coordinates analysis to ascertain the possible causes of variation. From the findings, this research argues that migration has enhanced the forces of cultural dynamism, which have resulted in significant variations in the architecture of this fishing group.

  17. Evidence-based management.

    Pfeffer, Jeffrey; Sutton, Robert I

    2006-01-01

    For the most part, managers looking to cure their organizational ills rely on obsolete knowledge they picked up in school, long-standing but never proven traditions, patterns gleaned from experience, methods they happen to be skilled in applying, and information from vendors. They could learn a thing or two from practitioners of evidence-based medicine, a movement that has taken the medical establishment by storm over the past decade. A growing number of physicians are eschewing the usual, flawed resources and are instead identifying, disseminating, and applying research that is soundly conducted and clinically relevant. It's time for managers to do the same. The challenge is, quite simply, to ground decisions in the latest and best knowledge of what actually works. In some ways, that's more difficult to do in business than in medicine. The evidence is weaker in business; almost anyone can (and many people do) claim to be a management expert; and a motley crew of sources--Shakespeare, Billy Graham,Jack Welch, Attila the Hunare used to generate management advice. Still, it makes sense that when managers act on better logic and strong evidence, their companies will beat the competition. Like medicine, management is learned through practice and experience. Yet managers (like doctors) can practice their craft more effectively if they relentlessly seek new knowledge and insight, from both inside and outside their companies, so they can keep updating their assumptions, skills, and knowledge.

  18. Skull base tumors

    Kikinis, R.; Matsumae, M.; Jolesz, F.A.; Black, P.M.; Cline, H.E.; Lorenson, W.E.

    1991-01-01

    This paper reports on an image processing procedure for the planning of surgery of skull base tumors that can extract bone, vessels, tumor, and brain parenchyma and that permits resolution of cranial nerves. Three-dimensional (3D) reconstructions were generated from double-echo long TR interleaved conventional spin-echo and fast-spin-echo MR imaging data. Sixteen cases have been analyzed preoperatively. Image processing consisted of a multistep procedure combining a supervised multivariate analysis with neighborhood operations such as connectivity and erosion/dilation. 3D renderings of anatomic structures of interest were then generated. Cases were evaluated preoperatively and manipulated interactively with the computer-generated images by a team consisting of neuroradiologists, neurosurgeons, and craniofacial surgeons. The preparation of 3D reconstructions required only a few hours and was performed mostly by a research assistant. The preoperative analysis of the 3D reconstructions was found to be a valuable tool, providing information complementing the surgeon's understanding of a case as derived from conventional imaging. The interactive manipulation of data proved to be a powerful way to evaluate alternative surgical approaches

  19. Constraint-based scheduling

    Zweben, Monte

    1993-01-01

    The GERRY scheduling system developed by NASA Ames with assistance from the Lockheed Space Operations Company, and the Lockheed Artificial Intelligence Center, uses a method called constraint-based iterative repair. Using this technique, one encodes both hard rules and preference criteria into data structures called constraints. GERRY repeatedly attempts to improve schedules by seeking repairs for violated constraints. The system provides a general scheduling framework which is being tested on two NASA applications. The larger of the two is the Space Shuttle Ground Processing problem which entails the scheduling of all the inspection, repair, and maintenance tasks required to prepare the orbiter for flight. The other application involves power allocation for the NASA Ames wind tunnels. Here the system will be used to schedule wind tunnel tests with the goal of minimizing power costs. In this paper, we describe the GERRY system and its application to the Space Shuttle problem. We also speculate as to how the system would be used for manufacturing, transportation, and military problems.

  20. Refractory metal based superalloys

    Alonso, Paula R.; Vicente, Eduardo E.; Rubiolo, Gerardo H.

    1999-01-01

    Refractory metals are looked as promising materials for primary circuits in fission reactors and even as fusion reactor components. Indeed, superalloys could be developed which take advantage of their high temperature properties together with the benefits of a two- phase (intermetallic compound-refractory metal matrix) coherent structure. In 1993, researchers of the Office National d'Etudes et de Recherches Aerospatiales of France reported the observation of such a coherent structure in the Ta-Ti-Zr-Al-Nb-Mo system although the exact composition is not reported. The intermetallic compound would be Ti 2 AlMo based. However, the formation of this compound and its possible coexistence with a disordered bcc phase in the ternary system Ti-Al-Mo is a controversial subject in the related literature. In this work we develop a technique to obtain homogeneous alloys samples with 50 Ti-25 Al-25 Mo composition. The resulting specimens were characterized by optical and electronic metallography (SEM), microprobe composition measurements (EPMA) and X-ray diffraction (XRD) analyses. The results show the evidence for a bcc (A2→B2) ordering reaction in the Ti-Al-Mo system in the 50 Ti-25 Al-25 Mo composition. (author)

  1. Fluorescence lifetime based bioassays

    Meyer-Almes, Franz-Josef

    2017-12-01

    Fluorescence lifetime (FLT) is a robust intrinsic property and material constant of fluorescent matter. Measuring this important physical indicator has evolved from a laboratory curiosity to a powerful and established technique for a variety of applications in drug discovery, medical diagnostics and basic biological research. This distinct trend was mainly driven by improved and meanwhile affordable laser and detection instrumentation on the one hand, and the development of suitable FLT probes and biological assays on the other. In this process two essential working approaches emerged. The first one is primarily focused on high throughput applications employing biochemical in vitro assays with no requirement for high spatial resolution. The second even more dynamic trend is the significant expansion of assay methods combining highly time and spatially resolved fluorescence data by fluorescence lifetime imaging. The latter approach is currently pursued to enable not only the investigation of immortal tumor cell lines, but also specific tissues or even organs in living animals. This review tries to give an actual overview about the current status of FLT based bioassays and the wide range of application opportunities in biomedical and life science areas. In addition, future trends of FLT technologies will be discussed.

  2. Carbon nanotube based photocathodes

    Hudanski, Ludovic; Minoux, Eric; Schnell, Jean-Philippe; Xavier, Stephane; Pribat, Didier; Legagneux, Pierre; Gangloff, Laurent; Teo, Kenneth B K; Robertson, John; Milne, William I

    2008-01-01

    This paper describes a novel photocathode which is an array of vertically aligned multi-walled carbon nanotubes (MWCNTs), each MWCNT being associated with one p-i-n photodiode. Unlike conventional photocathodes, the functions of photon-electron conversion and subsequent electron emission are physically separated. Photon-electron conversion is achieved with p-i-n photodiodes and the electron emission occurs from the MWCNTs. The current modulation is highly efficient as it uses an optically controlled reconfiguration of the electric field at the MWCNT locations. Such devices are compatible with high frequency and very large bandwidth operation and could lead to their application in compact, light and efficient microwave amplifiers for satellite telecommunication. To demonstrate this new photocathode concept, we have fabricated the first carbon nanotube based photocathode using silicon p-i-n photodiodes and MWCNT bunches. Using a green laser, this photocathode delivers 0.5 mA with an internal quantum efficiency of 10% and an I ON /I OFF ratio of 30

  3. Based on Channel Characteristics

    Zhuo Hao

    2013-01-01

    Full Text Available A number of key agreement schemes based on wireless channel characteristics have been proposed recently. However, previous key agreement schemes require that two nodes which need to agree on a key are within the communication range of each other. Hence, they are not suitable for multihop wireless networks, in which nodes do not always have direct connections with each other. In this paper, we first propose a basic multihop key agreement scheme for wireless ad hoc networks. The proposed basic scheme is resistant to external eavesdroppers. Nevertheless, this basic scheme is not secure when there exist internal eavesdroppers or Man-in-the-Middle (MITM adversaries. In order to cope with these adversaries, we propose an improved multihop key agreement scheme. We show that the improved scheme is secure against internal eavesdroppers and MITM adversaries in a single path. Both performance analysis and simulation results demonstrate that the improved scheme is efficient. Consequently, the improved key agreement scheme is suitable for multihop wireless ad hoc networks.

  4. Biosensors based on cantilevers.

    Alvarez, Mar; Carrascosa, Laura G; Zinoviev, Kiril; Plaza, Jose A; Lechuga, Laura M

    2009-01-01

    Microcantilevers based-biosensors are a new label-free technique that allows the direct detection of biomolecular interactions in a label-less way and with great accuracy by translating the biointeraction into a nanomechanical motion. Low cost and reliable standard silicon technologies are widely used for the fabrication of cantilevers with well-controlled mechanical properties. Over the last years, the number of applications of these sensors has shown a fast growth in diverse fields, such as genomic or proteomic, because of the biosensor flexibility, the low sample consumption, and the non-pretreated samples required. In this chapter, we report a dedicated design and a fabrication process of highly sensitive microcantilever silicon sensors. We will describe as well an application of the device in the environmental field showing the immunodetection of an organic toxic pesticide as an example. The cantilever biofunctionalization process and the subsequent pesticide determination are detected in real time by monitoring the nanometer-scale bending of the microcantilever due to a differential surface stress generated between both surfaces of the device.

  5. Flow-Based Provenance

    Sabah Al-Fedaghi

    2017-02-01

    Full Text Available Aim/Purpose: With information almost effortlessly created and spontaneously available, current progress in Information and Communication Technology (ICT has led to the complication that information must be scrutinized for trustworthiness and provenance. Information systems must become provenance-aware to be satisfactory in accountability, reproducibility, and trustworthiness of data. Background:\tMultiple models for abstract representation of provenance have been proposed to describe entities, people, and activities involved in producing a piece of data, including the Open Provenance Model (OPM and the World Wide Web Consortium. These models lack certain concepts necessary for specifying workflows and encoding the provenance of data products used and generated. Methodology: Without loss of generality, the focus of this paper is on OPM depiction of provenance in terms of a directed graph. We have redrawn several case studies in the framework of our proposed model in order to compare and evaluate it against OPM for representing these cases. Contribution: This paper offers an alternative flow-based diagrammatic language that can form a foundation for modeling of provenance. The model described here provides an (abstract machine-like representation of provenance. Findings: The results suggest a viable alternative in the area of diagrammatic representation for provenance applications. Future Research: Future work will seek to achieve more accurate comparisons with current models in the field.

  6. Communication Base Station Log Analysis Based on Hierarchical Clustering

    Zhang Shao-Hua

    2017-01-01

    Full Text Available Communication base stations generate massive data every day, these base station logs play an important value in mining of the business circles. This paper use data mining technology and hierarchical clustering algorithm to group the scope of business circle for the base station by recording the data of these base stations.Through analyzing the data of different business circle based on feature extraction and comparing different business circle category characteristics, which can choose a suitable area for operators of commercial marketing.

  7. Mindfulness-Based Stress Reduction

    ... R S T U V W X Y Z Mindfulness-Based Stress Reduction (MBSR) Information 6 Things You ... Disease and Dementia (12/20/13) Research Spotlights Mindfulness-Based Stress Reduction, Cognitive-Behavioral Therapy Shown To ...

  8. Risk-based configuration control

    Szikszai, T.

    1997-01-01

    The presentation discusses the following issues: The Configuration Control; The Risk-based Configuration Control (during power operation mode, and during shutdown mode). PSA requirements. Use of Risk-based Configuration Control System. Configuration Management (basic elements, benefits, information requirements)

  9. OLBS: Offline location based services

    Coelho, P; Ana Aguiar; João Correia Lopes

    2011-01-01

    Most existing location-based services rely on ubiquitous connectivity to deliver location-based contents to the users. However, connectivity is not available anywhere at anytime even in urban centres. Underground, indoors, remote areas, and foreign countries are examples situations where users commonly do not have guaranteed connectivity but could profit from location-based contents. In this work, we propose an open platform for publishing, distributing and maintaining location-based contents...

  10. ‘"Education-based Research"

    Degn Johansson, Troels

    This paper lays out a concept of education-based research-the production of research knowledge within the framework of tertiary design education-as an integration of problem-based learning and research-based education. This leads to a critique of reflective practice as the primary way to facilitate...... learning at this level, a discussion of the nature of design problems in the instrumentalist tradition, and some suggestions as to how design studies curricula may facilitate education-based research....

  11. Health Physics Positions Data Base

    Kerr, G.D.; Borges, T.; Stafford, R.S.; Lu, P.Y.; Carter, D.

    1992-05-01

    The Health Physics Positions (HPPOS) Data Base of the Nuclear Regulatory Commission (NRC) is a collection of summaries of NRC staff positions on a wide range of topics in radiation protection (health physics). The bases for the data base are 247 original documents in the form of letters, memoranda, and excerpts from technical reports. The HPPOS Data Base was developed by the NRC Headquarters and Regional Offices to help ensure uniformity in inspections, enforcement, and licensing actions

  12. Memory-Based Shallow Parsing

    Sang, Erik F. Tjong Kim

    2002-01-01

    We present memory-based learning approaches to shallow parsing and apply these to five tasks: base noun phrase identification, arbitrary base phrase recognition, clause detection, noun phrase parsing and full parsing. We use feature selection techniques and system combination methods for improving the performance of the memory-based learner. Our approach is evaluated on standard data sets and the results are compared with that of other systems. This reveals that our approach works well for ba...

  13. Lunar Base Heat Pump

    Walker, D.; Fischbach, D.; Tetreault, R.

    1996-01-01

    The objective of this project was to investigate the feasibility of constructing a heat pump suitable for use as a heat rejection device in applications such as a lunar base. In this situation, direct heat rejection through the use of radiators is not possible at a temperature suitable for lde support systems. Initial analysis of a heat pump of this type called for a temperature lift of approximately 378 deg. K, which is considerably higher than is commonly called for in HVAC and refrigeration applications where heat pumps are most often employed. Also because of the variation of the rejection temperature (from 100 to 381 deg. K), extreme flexibility in the configuration and operation of the heat pump is required. A three-stage compression cycle using a refrigerant such as CFC-11 or HCFC-123 was formulated with operation possible with one, two or three stages of compression. Also, to meet the redundancy requirements, compression was divided up over multiple compressors in each stage. A control scheme was devised that allowed these multiple compressors to be operated as required so that the heat pump could perform with variable heat loads and rejection conditions. A prototype heat pump was designed and constructed to investigate the key elements of the high-lift heat pump concept. Control software was written and implemented in the prototype to allow fully automatic operation. The heat pump was capable of operation over a wide range of rejection temperatures and cooling loads, while maintaining cooling water temperature well within the required specification of 40 deg. C +/- 1.7 deg. C. This performance was verified through testing.

  14. Performance-Based Funding Brief

    Washington Higher Education Coordinating Board, 2011

    2011-01-01

    A number of states have made progress in implementing performance-based funding (PFB) and accountability. This policy brief summarizes main features of performance-based funding systems in three states: Tennessee, Ohio, and Indiana. The brief also identifies key issues that states considering performance-based funding must address, as well as…

  15. Benefit-based tree valuation

    E.G. McPherson

    2007-01-01

    Benefit-based tree valuation provides alternative estimates of the fair and reasonable value of trees while illustrating the relative contribution of different benefit types. This study compared estimates of tree value obtained using cost- and benefit-based approaches. The cost-based approach used the Council of Landscape and Tree Appraisers trunk formula method, and...

  16. Different perspectives on economic base.

    Lisa K. Crone; Richard W. Haynes; Nicholas E. Reyna

    1999-01-01

    Two general approaches for measuring the economic base are discussed. Each method is used to define the economic base for each of the counties included in the Interior Columbia Basin Ecosystem Management Project area. A more detailed look at four selected counties results in similar findings from different approaches. Limitations of economic base analysis also are...

  17. Memory-Based Shallow Parsing

    Tjong Kim Sang, E.F.

    2002-01-01

    We present memory-based learning approaches to shallow parsing and apply these to five tasks: base noun phrase identification, arbitrary base phrase recognition, clause detection, noun phrase parsing and full parsing. We use feature selection techniques and system combination methods for improving

  18. Condition based spare parts supply

    Lin, X.; Basten, Robertus Johannes Ida; Kranenburg, A.A.; van Houtum, Geert-Jan

    2012-01-01

    We consider a spare parts stock point that serves an installed base of machines. Each machine contains the same critical component, whose degradation behavior is described by a Markov process. We consider condition based spare parts supply, and show that an optimal, condition based inventory policy

  19. Evidence-based dentistry.

    Chambers, David W

    2010-01-01

    Both panegyric and criticism of evidence-based dentistry tend to be clumsy because the concept is poorly defined. This analysis identifies several contributions to the profession that have been made under the EBD banner. Although the concept of clinicians integrating clinical epidemiology, the wisdom of their practices, and patients' values is powerful, its implementation has been distorted by a too heavy emphasis of computerized searches for research findings that meet the standards of academics. Although EBD advocates enjoy sharing anecdotal accounts of mistakes others have made, faulting others is not proof that one's own position is correct. There is no systematic, high-quality evidence that EBD is effective. The metaphor of a three-legged stool (evidence, experience, values, and integration) is used as an organizing principle. "Best evidence" has become a preoccupation among EBD enthusiasts. That overlong but thinly developed leg of the stool is critiqued from the perspectives of the criteria for evidence, the difference between internal and external validity, the relationship between evidence and decision making, the ambiguous meaning of "best," and the role of reasonable doubt. The strongest leg of the stool is clinical experience. Although bias exists in all observations (including searches for evidence), there are simple procedures that can be employed in practice to increase useful and objective evidence there, and there are dangers in delegating policy regarding allowable treatments to external groups. Patient and practitioner values are the shortest leg of the stool. As they are so little recognized, their integration in EBD is problematic and ethical tensions exist where paternalism privileges science over patient's self-determined best interests. Four potential approaches to integration are suggested, recognizing that there is virtually no literature on how the "seat" of the three-legged stool works or should work. It is likely that most dentists

  20. Barrier Data Base user's guide

    Worrell, R.B.; Gould, D.J.; Wall, D.W.

    1977-06-01

    A special purpose data base for physical security barriers has been developed. In addition to barriers, the entities accommodated by the Barrier Data Base (BDB) include threats and references. A threat is established as a configuration of people and equipment which has been employed to penetrate (or attempt to penetrate) a barrier. References are used to cite publications pertinent to the barriers and threats in the data base. Utilization and maintenance of the Barrier Data Base is achieved with LIST, QUERY, ENTER, DELETE, and CHANGE commands which are used to manipulate the data base entities

  1. From oil-based mud to water-based mud

    Christiansen, C.

    1991-01-01

    Maersk Olie og Gas AS has used low toxic oil-based muds extensively since 1982 for drilling development wells and later in the development of horizontal well drilling techniques. However, in view of the strong drive towards a reduction in the amount of oil discharged to the North Sea from the oil industry, Maersk Olie og Gas AS initiated trials with new or improved types of water-based mud, first in deviated wells (1989) and then in horizontal wells (1990). The paper reviews Maersk Olie og Gas As experience with oil-based mud since the drilling of the first horizontal well in 1987, specifically with respect to cuttings washing equipment, oil retention on cuttings, and the procedure for monitoring of this parameter. It describes the circumstances leading to the decision to revert to water-based mud systems. Finally, it reviews the experience gained so far with the new improved types of water-based mud systems, mainly glycol and KCl/polymer mud systems. Comparison of operational data, such as rate of penetration, torque and drag, etc., is made between wells drilled with oil-based mud and water-based mud. The trials with the new improved types of water-based mud systems have been positive, i.e. horizontal wells can be drilled successfully with water-based mud. As a result, Maersk Olie og and Gas AS has decided to discontinue the use of low toxic oil-based muds in the Danish sector of the North Sea

  2. Workplace Based Assessment in Psychiatry

    Ayse Devrim Basterzi

    2009-11-01

    Full Text Available Workplace based assessment refers to the assessment of working practices based on what doctors actually do in the workplace, and is predominantly carried out in the workplace itself. Assessment drives learning and it is therefore essential that workplace-based assessment focuses on important attributes rather than what is easiest to assess. Workplacebased assessment is usually competency based. Workplace based assesments may well facilitate and enhance various aspects of educational supervisions, including its structure, frequency and duration etc. The structure and content of workplace based assesments should be monitored to ensure that its benefits are maximised by remaining tailored to individual trainees' needs. Workplace based assesment should be used for formative and summative assessments. Several formative assessment methods have been developed for use in the workplace such as mini clinical evaluation exercise (mini-cex, evidence based journal club assesment and case based discussion, multi source feedback etc. This review discusses the need of workplace based assesments in psychiatry graduate education and introduces some of the work place based assesment methods.

  3. Case-based reasoning: The marriage of knowledge base and data base

    Pulaski, Kirt; Casadaban, Cyprian

    1988-01-01

    The coupling of data and knowledge has a synergistic effect when building an intelligent data base. The goal is to integrate the data and knowledge almost to the point of indistinguishability, permitting them to be used interchangeably. Examples given in this paper suggest that Case-Based Reasoning is a more integrated way to link data and knowledge than pure rule-based reasoning.

  4. Knowledge base verification based on enhanced colored petri net

    Kim, Jong Hyun; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    1997-12-31

    Verification is a process aimed at demonstrating whether a system meets it`s specified requirements. As expert systems are used in various applications, the knowledge base verification of systems takes an important position. The conventional Petri net approach that has been studied recently in order to verify the knowledge base is found that it is inadequate to verify the knowledge base of large and complex system, such as alarm processing system of nuclear power plant. Thus, we propose an improved method that models the knowledge base as enhanced colored Petri net. In this study, we analyze the reachability and the error characteristics of the knowledge base and apply the method to verification of simple knowledge base. 8 refs., 4 figs. (Author)

  5. Knowledge base verification based on enhanced colored petri net

    Kim, Jong Hyun; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    1998-12-31

    Verification is a process aimed at demonstrating whether a system meets it`s specified requirements. As expert systems are used in various applications, the knowledge base verification of systems takes an important position. The conventional Petri net approach that has been studied recently in order to verify the knowledge base is found that it is inadequate to verify the knowledge base of large and complex system, such as alarm processing system of nuclear power plant. Thus, we propose an improved method that models the knowledge base as enhanced colored Petri net. In this study, we analyze the reachability and the error characteristics of the knowledge base and apply the method to verification of simple knowledge base. 8 refs., 4 figs. (Author)

  6. XML-Based SHINE Knowledge Base Interchange Language

    James, Mark; Mackey, Ryan; Tikidjian, Raffi

    2008-01-01

    The SHINE Knowledge Base Interchange Language software has been designed to more efficiently send new knowledge bases to spacecraft that have been embedded with the Spacecraft Health Inference Engine (SHINE) tool. The intention of the behavioral model is to capture most of the information generally associated with a spacecraft functional model, while specifically addressing the needs of execution within SHINE and Livingstone. As such, it has some constructs that are based on one or the other.

  7. Two-Step Hot-Compressed Water Treatment of Douglas Fir for Efficient Total Sugar Recovery by Enzymatic Hydrolysis

    Hiroyuki Inoue

    2016-04-01

    Full Text Available The non-catalytic hydrothermal pretreatment of softwood is generally less effective for subsequent enzymatic hydrolysis. In this study, the efficacy of hot-compressed water (HCW treatment of Douglas fir was investigated between 180 °C and 260 °C, allowing solubilization of the cellulose components. The enzymatic digestibility of cellulosic residues increased significantly under HCW conditions > 250 °C, and the enhanced glucan digestibility was closely related to the decomposition of the cellulose component. Combination of the first-stage HCW treatment (220 °C, 5 min to recover hemicellulosic sugars with the second-stage HCW treatment (260 °C, 5 min to improve cellulose digestibility gave a total sugar recovery of 56.2% based on the dried raw materials. This yield was 1.4 times higher than that from the one-step HCW-treated sample (260 °C, 5 min. Additionally, an enzymatic hydrolysate from the two-step HCW-treated sample exceeded 90% of the ethanol fermentation yield based on the total sugars present in the hydrolysates. These results suggest the potential of the two-step HCW treatment of softwood as a pretreatment technology for efficient total sugar recovery and ethanol production.

  8. Managing the Gap between Curriculum Based and Problem Based Learning

    Bygholm, Ann; Buus, Lillian

    2009-01-01

    /or but rather both/and. In this paper we describe an approach to design and delivery of online courses in computer science which on the one hand is based on a specified curriculum and on the other hand gives room for different learning strategies, problem based learning being one of them. We discuss......Traditionally there has been a clear distinction between curriculum based and problem based approaches to accomplish learning. Preferred approaches depend of course on conviction, culture, traditions and also on the specific learning situation. We will argue that it is not a question of either...

  9. Acids and bases solvent effects on acid-base strenght

    Cox, Brian G

    2013-01-01

    Acids and bases are ubiquitous in chemistry. Our understanding of them, however, is dominated by their behaviour in water. Transfer to non-aqueous solvents leads to profound changes in acid-base strengths and to the rates and equilibria of many processes: for example, synthetic reactions involving acids, bases and nucleophiles; isolation of pharmaceutical actives through salt formation; formation of zwitter- ions in amino acids; and chromatographic separation of substrates. This book seeks to enhance our understanding of acids and bases by reviewing and analysing their behaviour in non-aqueous solvents. The behaviour is related where possible to that in water, but correlations and contrasts between solvents are also presented.

  10. Computer-based and web-based radiation safety training

    Owen, C., LLNL

    1998-03-01

    The traditional approach to delivering radiation safety training has been to provide a stand-up lecture of the topic, with the possible aid of video, and to repeat the same material periodically. New approaches to meeting training requirements are needed to address the advent of flexible work hours and telecommuting, and to better accommodate individuals learning at their own pace. Computer- based and web-based radiation safety training can provide this alternative. Computer-based and web- based training is an interactive form of learning that the student controls, resulting in enhanced and focused learning at a time most often chosen by the student.

  11. Concurrent array-based queue

    Heidelberger, Philip; Steinmacher-Burow, Burkhard

    2015-01-06

    According to one embodiment, a method for implementing an array-based queue in memory of a memory system that includes a controller includes configuring, in the memory, metadata of the array-based queue. The configuring comprises defining, in metadata, an array start location in the memory for the array-based queue, defining, in the metadata, an array size for the array-based queue, defining, in the metadata, a queue top for the array-based queue and defining, in the metadata, a queue bottom for the array-based queue. The method also includes the controller serving a request for an operation on the queue, the request providing the location in the memory of the metadata of the queue.

  12. The knowledge base of journalism

    Svith, Flemming

    In this paper I propose the knowledge base as a fruitful way to apprehend journalism. With the claim that the majority of practice is anchored in knowledge – understood as 9 categories of rationales, forms and levels – this knowledge base appears as a contextual look at journalists’ knowledge......, and place. As an analytical framework, the knowledge base is limited to understand the practice of newspaper journalists, but, conversely, the knowledge base encompasses more general beginnings through the inclusion of overall structural relationships in the media and journalism and general theories...... on practice and knowledge. As the result of an abductive reasoning is a theory proposal, there is a need for more deductive approaches to test the validity of this knowledge base claim. It is thus relevant to investigate which rationales are included in the knowledge base of journalism, as the dimension does...

  13. Aperiodic-metamaterial-based absorber

    Quanlong Yang

    2017-09-01

    Full Text Available The periodic-metamaterial-based perfect absorber has been studied broadly. Conversely, if the unit cell in the metamaterial-based absorber is arranged aperiodically (aperiodic-metamaterial-based absorber, how does it perform? Inspired by this, here we present a systematic study of the aperiodic-metamaterial-based absorber. By investigating the response of metamaterial absorbers based on periodic, Fibonacci, Thue-Morse, and quasicrystal lattices, we found that aperiodic-metamaterial-based absorbers could display similar absorption behaviors as the periodic one in one hand. However, their absorption behaviors show different tendency depending on the thicknesses of the spacer. Further studies on the angle and polarization dependence of the absorption behavior are also presented.

  14. Estimating North Dakota's Economic Base

    Coon, Randal C.; Leistritz, F. Larry

    2009-01-01

    North Dakota’s economic base is comprised of those activities producing a product paid for by nonresidents, or products exported from the state. North Dakota’s economic base activities include agriculture, mining, manufacturing, tourism, and federal government payments for construction and to individuals. Development of the North Dakota economic base data is important because it provides the information to quantify the state’s economic growth, and it creates the final demand sectors for the N...

  15. Principles of models based engineering

    Dolin, R.M.; Hefele, J.

    1996-11-01

    This report describes a Models Based Engineering (MBE) philosophy and implementation strategy that has been developed at Los Alamos National Laboratory`s Center for Advanced Engineering Technology. A major theme in this discussion is that models based engineering is an information management technology enabling the development of information driven engineering. Unlike other information management technologies, models based engineering encompasses the breadth of engineering information, from design intent through product definition to consumer application.

  16. Logically automorphically equivalent knowledge bases

    Aladova, Elena; Plotkin, Tatjana

    2017-01-01

    Knowledge bases theory provide an important example of the field where applications of universal algebra and algebraic logic look very natural, and their interaction with practical problems arising in computer science might be very productive. In this paper we study the equivalence problem for knowledge bases. Our interest is to find out how the informational equivalence is related to the logical description of knowledge. Studying various equivalences of knowledge bases allows us to compare d...

  17. Brain-Based Learning and Standards-Based Elementary Science.

    Konecki, Loretta R.; Schiller, Ellen

    This paper explains how brain-based learning has become an area of interest to elementary school science teachers, focusing on the possible relationships between, and implications of, research on brain-based learning to the teaching of science education standards. After describing research on the brain, the paper looks at three implications from…

  18. Fatigue data bases in Europe

    Olivier, R.; Koettgen, V.B.; Seeger, T.; Boller, C.

    1988-01-01

    Based on an inquiry with well-known European fatigue institutions the paper describes existing more or less extensive collections and data bases of S-N and crack growth data, mainly on unwelded and welded steel and aluminium in organizations and countries as follows: CEC, ESA, Federal Republic of Germany, GDR, Italy, Norway, Republic of Ireland, Switzerland, UK. This documentation of the present state is completed by a short survey on available European fatigue standards and design rules, serving as a data base for nominal materials data. Requirements for data base concepts, contents, user interface and data structure are presented in a short overview. (orig./HP)

  19. Capability-based computer systems

    Levy, Henry M

    2014-01-01

    Capability-Based Computer Systems focuses on computer programs and their capabilities. The text first elaborates capability- and object-based system concepts, including capability-based systems, object-based approach, and summary. The book then describes early descriptor architectures and explains the Burroughs B5000, Rice University Computer, and Basic Language Machine. The text also focuses on early capability architectures. Dennis and Van Horn's Supervisor; CAL-TSS System; MIT PDP-1 Timesharing System; and Chicago Magic Number Machine are discussed. The book then describes Plessey System 25

  20. New Mexico Geothermal Data Base

    Witcher, J.C.; Whittier, J.; Morgan, R.

    1990-01-01

    This paper reports on the New Mexico Geothermal Data Base (NMGDB) which is a comprehensive public-domain data base of low-temperature geothermal resource information for New Mexico that is designed to assist researchers and developers. A broad range of geoscience, engineering, climatic, economic, and land status information are complied in the dBASE III PLUS data base management system for use on an IBM or IBM-compatible personal computer. A user friendly menu format with on-screen prompts allows easy and convenient use

  1. Isochronous cyclotron data base description

    Kiyan, I.N.; Vorozhtsov, S.B.; Tarashkevich, R.

    2004-01-01

    The relational data base of the control parameters of the isochronous cyclotron, Isochronous Cyclotron Data Base (ICDB), is described. The relational data base under consideration, written in Transact SQL for the MS SQL Server 2000 with the use of MS Enterprise Manager and MS Query Analyzer, was installed on the server of the AIC144 isochronous cyclotron in Krakow, which operates under the control of the operating system MS Windows Server 2003 (Standard Edition). The interface of the data base under considerations is written in C++ with the use of Visual C++ .NET and is built in the Cyclotron Operator Help Program (COHP), which is used for modeling the operational modes of the isochronous cyclotron. Communication between the COHP and the relational data base is realised on the base of the Open Data Base Connectivity protocol. The relational data base of the control parameter of the isochronous cyclotron is intended: firstly, for systematization and automatic use of all measured and modelled magnetic field maps in the process of modeling the operational modes; secondly, for systematization and convenient access to the stored operational modes; thirdly, for simplifying the operator's work. The relational data base of the control parameter of the isochronous cyclotron reflects its physical structure and the logic of its operator's work. (author)

  2. Theory-Based Stakeholder Evaluation

    Hansen, Morten Balle; Vedung, Evert

    2010-01-01

    This article introduces a new approach to program theory evaluation called theory-based stakeholder evaluation or the TSE model for short. Most theory-based approaches are program theory driven and some are stakeholder oriented as well. Practically, all of the latter fuse the program perceptions of the various stakeholder groups into one unitary…

  3. Package-based software development

    Jonge, de M.; Chroust, G.; Hofer, C.

    2003-01-01

    The main goal of component-based software engineering is to decrease development time and development costs of software systems, by reusing prefabricated building blocks. Here we focus on software reuse within the implementation of such component-based applications, and on the corresponding software

  4. Cloud-Based Data Storage

    Waters, John K.

    2011-01-01

    The vulnerability and inefficiency of backing up data on-site is prompting school districts to switch to more secure, less troublesome cloud-based options. District auditors are pushing for a better way to back up their data than the on-site, tape-based system that had been used for years. About three years ago, Hendrick School District in…

  5. Cluster Based Vector Attribute Filtering

    Kiwanuka, Fred N.; Wilkinson, Michael H.F.

    2016-01-01

    Morphological attribute filters operate on images based on properties or attributes of connected components. Until recently, attribute filtering was based on a single global threshold on a scalar property to remove or retain objects. A single threshold struggles in case no single property or

  6. Dog Mathematics: Exploring Base-4

    Kurz, Terri L.; Yanik, H. Bahadir; Lee, Mi Yeon

    2016-01-01

    Using a dog's paw as a basis for numerical representation, sixth grade students explored how to count and regroup using the dog's four digital pads. Teachers can connect these base-4 explorations to the conceptual meaning of place value and regrouping using base-10.

  7. Forest biomass-based energy

    Janaki R. R. Alavalapati; Pankaj Lal; Andres Susaeta; Robert C. Abt; David N. Wear

    2013-01-01

    Key FindingsHarvesting woody biomass for use as bioenergy is projected to range from 170 million to 336 million green tons by 2050, an increase of 54 to 113 percent over current levels.Consumption projections for forest biomass-based energy, which are based on Energy Information Administration projections, have a high level of...

  8. Generic component failure data base

    Eide, S.A.; Calley, M.B.

    1992-01-01

    This report discusses comprehensive component generic failure data base which has been developed for light water reactor probabilistic risk assessments. The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) was used to generate component failure rates. Using this approach, most of the failure rates are based on actual plant data rather then existing estimates

  9. Groebner bases in perturbative calculations

    Gerdt, Vladimir P. [Laboratory of Information Technologies, Joint Institute for Nuclear Research, 141980 Dubna (Russian Federation)

    2004-10-01

    In this paper we outline the most general and universal algorithmic approach to reduction of loop integrals to basic integrals. The approach is based on computation of Groebner bases for recurrence relations derived from the integration by parts method. In doing so we consider generic recurrence relations when propagators have arbitrary integer powers treated as symbolic variables (indices) for the relations.

  10. Groebner bases in perturbative calculations

    Gerdt, Vladimir P.

    2004-01-01

    In this paper we outline the most general and universal algorithmic approach to reduction of loop integrals to basic integrals. The approach is based on computation of Groebner bases for recurrence relations derived from the integration by parts method. In doing so we consider generic recurrence relations when propagators have arbitrary integer powers treated as symbolic variables (indices) for the relations

  11. Ground-based photo monitoring

    Frederick C. Hall

    2000-01-01

    Ground-based photo monitoring is repeat photography using ground-based cameras to document change in vegetation or soil. Assume those installing the photo location will not be the ones re-photographing it. This requires a protocol that includes: (1) a map to locate the monitoring area, (2) another map diagramming the photographic layout, (3) type and make of film such...

  12. Methods in Logic Based Control

    Christensen, Georg Kronborg

    1999-01-01

    Desing and theory of Logic Based Control systems.Boolean Algebra, Karnaugh Map, Quine McClusky's algorithm. Sequential control design. Logic Based Control Method, Cascade Control Method. Implementation techniques: relay, pneumatic, TTL/CMOS,PAL and PLC- and Soft_PLC implementation. PLC...

  13. Models for Rational Number Bases

    Pedersen, Jean J.; Armbruster, Frank O.

    1975-01-01

    This article extends number bases to negative integers, then to positive rationals and finally to negative rationals. Methods and rules for operations in positive and negative rational bases greater than one or less than negative one are summarized in tables. Sample problems are explained and illustrated. (KM)

  14. Defining Nature-Based Preschools

    Larimore, Rachel

    2016-01-01

    Nature-based early childhood education. Nature-based preschool. Nature preschool. Forest kindergarten. Nature kindergarten. Waldkindergarten. Forest school. These are a few of the program terms currently being discussed among early childhood environmental education professionals in the United States. Why is there so much discussion about the names…

  15. Plasma-based accelerator structures

    Schroeder, Carl B.

    1999-01-01

    Plasma-based accelerators have the ability to sustain extremely large accelerating gradients, with possible high-energy physics applications. This dissertation further develops the theory of plasma-based accelerators by addressing three topics: the performance of a hollow plasma channel as an accelerating structure, the generation of ultrashort electron bunches, and the propagation of laser pulses is underdense plasmas

  16. Machine intelligence and knowledge bases

    Furukawa, K

    1981-09-01

    The basic functions necessary in machine intelligence are a knowledge base and a logic programming language such as PROLOG using deductive reasoning. Recently inductive reasoning based on meta knowledge and default reasoning have been developed. The creative thought model of Lenit is reviewed and the concept of knowledge engineering is introduced. 17 references.

  17. Automated deficiency letter data base

    Jones, R.D.

    1983-12-01

    An automated data base relevant to the various licensee deficiencies that accrue during the materials licensing application review process of the Nuclear Regulatory Commission (NRC) is described. A data base management system (DBMs) is used for data retrieval, file-tending, and examination of the interrelationships among the data types in the data base. Use of word processors to emulate computer terminals for the purpose of data base population (loading) and report generation is discussed. Also described is the technique used to link, for update purposes, the data base (accessed by means of SYSTEM 2000 on a CDC 6600 computer) to the NRC Material License Master File resident on the National Institutes of Health (NIH) IBM System 370 computer. A user's manual that provides easy-to-understand instructions for the nonprogramming user on how to generate ad hoc analytical reports to facilitate management decisions is also included

  18. Power Reactor Embrittlement Data Base

    Kam, F.B.K.; Stallmann, F.W.; Wang, J.A.

    1990-01-01

    Regulatory and research evaluations of embrittlement predication models and of pressure vessel integrity can be greatly expedited by the use of a well-designed, computerized data base. The Power Reactor Embrittlement Data Base (PR-EDB) is such a comprehensive collection of data for US commercial nuclear reactors. The Nuclear Regulatory Commission (NRC) has provided financial support, and the Electric Power Research Institute (EPRI) has provided technical assistance in the quality assurance (QA) of the data to establish an industry-wide data base that will be maintained and updated on a long-term basis. Successful applications of the data base to several of NRC's evaluations have received favorable response and support for its continuation. The future direction of the data base has been designed to include the test reactor and other types of data of interest to the regulators and the researchers. 1 ref

  19. Team-based global organizations

    Zander, Lena; Butler, Christina; Mockaitis, Audra

    2015-01-01

    diversity in enhancing team creativity and performance, and 2) the sharing of knowledge in team-based organizations, while the other two themes address global team leadership: 3) the unprecedented significance of social capital for the success of global team leader roles; and 4) the link between shared......This chapter draws on a panel discussion of the future of global organizing as a team-based organization at EIBA 2014 in Uppsala, Sweden. We began by discussing contemporary developments of hybrid forms of hierarchy and teams-based organizing, but we venture to propose that as organizations become...... characterized by decreased importance of hierarchal structures, more fluidity across borders, even a possible dissolution of firm boundaries, we move towards team-based organizing as an alternative to more traditional forms of hierarchical-based organizing in global firms. To provide input for a discussion...

  20. Content-based intermedia synchronization

    Oh, Dong-Young; Sampath-Kumar, Srihari; Rangan, P. Venkat

    1995-03-01

    Inter-media synchronization methods developed until now have been based on syntactic timestamping of video frames and audio samples. These methods are not fully appropriate for the synchronization of multimedia objects which may have to be accessed individually by their contents, e.g. content-base data retrieval. We propose a content-based multimedia synchronization scheme in which a media stream is viewed as hierarchial composition of smaller objects which are logically structured based on the contents, and the synchronization is achieved by deriving temporal relations among logical units of media object. content-based synchronization offers several advantages such as, elimination of the need for time stamping, freedom from limitations of jitter, synchronization of independently captured media objects in video editing, and compensation for inherent asynchronies in capture times of video and audio.

  1. Content-Based Image Retrial Based on Hadoop

    DongSheng Yin

    2013-01-01

    Full Text Available Generally, time complexity of algorithms for content-based image retrial is extremely high. In order to retrieve images on large-scale databases efficiently, a new way for retrieving based on Hadoop distributed framework is proposed. Firstly, a database of images features is built by using Speeded Up Robust Features algorithm and Locality-Sensitive Hashing and then perform the search on Hadoop platform in a parallel way specially designed. Considerable experimental results show that it is able to retrieve images based on content on large-scale cluster and image sets effectively.

  2. Image based Monument Recognition using Graph based Visual Saliency

    Kalliatakis, Grigorios; Triantafyllidis, Georgios

    2013-01-01

    This article presents an image-based application aiming at simple image classification of well-known monuments in the area of Heraklion, Crete, Greece. This classification takes place by utilizing Graph Based Visual Saliency (GBVS) and employing Scale Invariant Feature Transform (SIFT) or Speeded......, the images have been previously processed according to the Graph Based Visual Saliency model in order to keep either SIFT or SURF features corresponding to the actual monuments while the background “noise” is minimized. The application is then able to classify these images, helping the user to better...

  3. Perspectives for the production of bioethanol from wood and straw in Austria: technical, economic, and ecological aspects

    Kravanja, Philipp; Friedl, Anton [Vienna University of Technology, Thermal Process Engineering-Process Simulation, Institute of Chemical Engineering, Wien (Austria); Koenighofer, Kurt; Canella, Lorenza; Jungmeier, Gerfried [Joanneum Research Forschungsgesellschaft mbH - Resources, Graz (Austria)

    2012-06-15

    Bioethanol produced from lignocellulosic resources is a promising candidate for the replacement of fossil fuels. In this study, we aim to determine the perspectives to produce lignocellulosic ethanol in Austria. Technical, environmental and economic aspects are being considered. Thirteen biotechnological production concepts using the raw materials straw and softwood were established and simulated with the steady state flowsheeting software IPSEpro. Bioethanol production cost and greenhouse gas (GHG) emissions for each system were calculated based on mass and energy balances obtained from process simulation. The emission of GHGs along the entire bioethanol process chain (''from well to wheel'') are compared to two reference systems producing the same amounts of by-products. In all concepts, process heat and considerable amounts of the by-products electricity, heat, pellets, C5 molasses, or biomethane could be obtained from residual biomass. Compared to a reference system driven by fossil energy, GHG emissions can be reduced by up to 76%. The production cost of ethanol was found to between 0.66 EUR and 0.94 EUR per liter of gasoline equivalent. The type and amount of by-product influence technical, economic, and environmental performance significantly. Converting all straw and softwood available in Austria to ethanol would result in an annual production of 340 kt. (orig.)

  4. Optical transparency of paper as a function of moisture content with applications to moisture measurement.

    Forughi, A F; Green, S I; Stoeber, B

    2016-02-01

    Accurate measurement of the moisture content of paper is essential in papermaking and is also important in some paper-based microfluidic devices. Traditional measurement techniques provide very limited spatiotemporal resolution and working range. This article presents a novel method for moisture content measurement whose operating principle is the strong correlation between the optical transparency of paper and its moisture content. Spectrographic and microscopic measurement techniques were employed to characterize the relation of moisture content and relative transparency of four types of paper: hardwood chemi-thermomechanical pulp paper, Northern bleached softwood kraft paper, unbleached softwood kraft paper, and General Electric(®) Whatman™ grade 1 chromatography paper. It was found that for all paper types, the paper transparency increased monotonically with the moisture content (as the ratio of the mass-of-water to the mass-of-dry-paper increased from 0% to 120%). This significant increase in relative transparency occurred due to the refractive index matching role of water in wet paper. It is further shown that mechanical loading of the paper has little impact on the relative transparency, for loadings that would be typical on a paper machine. The results of two transient water absorption experiments are presented that show the utility and accuracy of the technique.

  5. The economy of chip, tree section and short wood methods in the procurement of a pulp mill; Hake-, puu- ja puutavaralajimenetelmien taloudellisuus massatehtaan kuitu- ja energiapuun hankinnassa

    Imponen, V [Metsaeteho Oy, Helsinki (Finland)

    1997-12-01

    Regional forest management plans for Finland`s private, non-industrial forestry indicate that first thinnings account for 13 % of the felling potential in these forests. The majority of first thinnings focus on pine-dominated stands. First-thinnings wood represents 29 % of the allowable cut consisting of pine pulpwood. However, small-diameter pine has not enjoyed great demand as raw material by the chemical pulp industry due to the high associated production costs and due to its inferior fibre properties when compared to large-sized softwood logs. Consequently, research and development work has been focused on the procurement, handling and usage of small-diameter wood, and especially of first-thinning pine. Both defibration and use as fuel are options when considering how to exploit small-diameter softwood raw material. Integrated procurement of industrial wood and wood fuel have improved the profitability of wood from thinnings in pulp manufacture and in energy generation at the mill. These methods would appear to be economic in regard to both the wood procurement of the pulp mills even at the present prices paid for alternative fuels. Advances in combustion technology and increased generation of electric power improve the competitiveness of methods based on the harvesting tree sections in comparison with the shortwood system yielding delimbed roundwood. The adoption of longer timber lorry-trailer combination as recognised by EU directives will have the effect of reducing the transportation costs for non-delimbed and partially delimbed wood. (orig.)

  6. radio frequency based radio frequency based water level monitor

    eobe

    ABSTRACT. This paper elucidates a radio frequency (RF) based transmission and reception system used to remotely monitor and .... range the wireless can cover but in this prototype, it ... power supply to the system, the sensed water level is.

  7. Value-based metrics and Internet-based enterprises

    Gupta, Krishan M.

    2001-10-01

    Within the last few years, a host of value-based metrics like EVA, MVA, TBR, CFORI, and TSR have evolved. This paper attempts to analyze the validity and applicability of EVA and Balanced Scorecard for Internet based organizations. Despite the collapse of the dot-com model, the firms engaged in e- commerce continue to struggle to find new ways to account for customer-base, technology, employees, knowledge, etc, as part of the value of the firm. While some metrics, like the Balance Scorecard are geared towards internal use, others like EVA are for external use. Value-based metrics are used for performing internal audits as well as comparing firms against one another; and can also be effectively utilized by individuals outside the firm looking to determine if the firm is creating value for its stakeholders.

  8. SB certification for mixture-based specification for flexible base.

    2012-10-01

    Presentation topics: : Establish List of Qualified Producers; : Producers Responsible for Process Control/Quality Control; : Reduce TxDOT Sampling and Testing; : Expedite Aggregate Base Acceptance; : Share Responsibility (Producer/TxDOT) for Quality ...

  9. Object-Based Benefits without Object-Based Representations

    Alvarez, George Angelo; Fougnie, Daryl; Cormiea, Sarah M

    2012-01-01

    The organization of visual information into objects strongly influences visual memory: Displays with objects defined by two features (e.g. color, orientation) are easier to remember than displays with twice as many objects defined by one feature (Olson & Jiang, 2002). Existing theories suggest that this ‘object-benefit’ is based on object-based limitations in working memory: because a limited number of objects can be stored, packaging features together so that fewer objects have to be remembe...

  10. Designing Android Based Augmented Reality Location-Based Service Application

    Alim Hardiansyah

    2018-01-01

    Full Text Available Android is an operating system for Linux based smartphone. Android provides an open platform for the developers to create their own application. The most developed and used application now is location based application. This application gives personalization service for mobile device user and is customized to their location. Location based service also gives an opportunity for the developers to develop and increase the value of service. One of the technologies that could be combined with location based application is augmented reality. Augmented reality combines the virtual world with the real one. By the assistance of augmented reality, our surrounding environment could interact in digital form. Information of objects and environment surround us could be added to the augmented reality system and presented. Based on the background, the writers tried to implement those technologies on now rapidly developing android application as a final project to achieve bachelor degree in Department of Informatics Engineering, Faculty of Information Technology and Visual Communication, Al Kamal Science and Technology Institute. This application could be functioned to locate school by using location based service technology with the assistance of navigational applications such as waze and google maps, in form of live direction process through the smartphone

  11. WPS criterion proposition based on experimental data base interpretation

    Chapuliot, S.; Izard, J.P.; Moinereau, D.; Marie, S.

    2011-01-01

    This article gives the background and the methodology developed to define a K J based criterion for brittle fracture of Reactor Pressure Vessel (RPV) submitted to Pressurized Thermal Shock (PTS), and taking into account Warm Pre Stressing effect (WPS). The first step of this methodology is the constitution of an experimental data base. This work was performed through bibliography and partnerships, and allows merging experimental results dealing with: -) Various ferritic steels; -) Various material states (as received, thermally aged, irradiated...); -) Various mode of fracture (cleavage, inter-granular, mixed mode); -) Various specimen geometry and size (CT, SENB, mock-ups); -) Various thermo-mechanical transients. Based on this experimental data base, a simple K J based limit is proposed and compared to experimental results. Parametric studies are performed in order to define the main parameters of the problem. Finally, a simple proposition based on a detailed analysis of tests results is performed. This proposition giving satisfactory results in every cases, it constitutes a good candidate for integration in French RSE-M code for in service assessment. (authors)

  12. EPICS Application Based on RTEMS

    Shi Haoli; Wang Chunhong; Tang Jingyu

    2009-01-01

    At present, in the accelerator field all over the world, the control system is established with EPICS, which is a configuration software package based on Ethernet and distributed control system. Early version of EPICS was developed based on VxWorks. Now, EPICS international collaboration group is dedicating to supporting open source, free RTEMS, and extending RTEMS into the newer version of EPICS3.14. The paper illustrates the development, characteristic of RTEMS, compares the performances of several ordinary RTOS, builds RTEMS operating system based on MVME5500, and finally presents an EPICS application example on RTEMS. (authors)

  13. Querying Natural Logic Knowledge Bases

    Andreasen, Troels; Bulskov, Henrik; Jensen, Per Anker

    2017-01-01

    This paper describes the principles of a system applying natural logic as a knowledge base language. Natural logics are regimented fragments of natural language employing high level inference rules. We advocate the use of natural logic for knowledge bases dealing with querying of classes...... in ontologies and class-relationships such as are common in life-science descriptions. The paper adopts a version of natural logic with recursive restrictive clauses such as relative clauses and adnominal prepositional phrases. It includes passive as well as active voice sentences. We outline a prototype...... for partial translation of natural language into natural logic, featuring further querying and conceptual path finding in natural logic knowledge bases....

  14. Home-based Healthcare Technology

    Verdezoto, Nervo

    of these systems target a specific treatment or condition and might not be sufficient to support the care management work at home. Based on a case study approach, my research investigates home-based healthcare practices and how they can inform future design of home-based healthcare technology that better account......Sustaining daily, unsupervised healthcare activities in non-clinical settings such as the private home can challenge, among others, older adults. To support such unsupervised care activities, an increasingly number of reminders and monitoring systems are being designed. However, most...

  15. Solar based hydrogen production systems

    Dincer, Ibrahim

    2013-01-01

    This book provides a comprehensive analysis of various solar based hydrogen production systems. The book covers first-law (energy based) and second-law (exergy based) efficiencies and provides a comprehensive understanding of their implications. It will help minimize the widespread misuse of efficiencies among students and researchers in energy field by using an intuitive and unified approach for defining efficiencies. The book gives a clear understanding of the sustainability and environmental impact analysis of the above systems. The book will be particularly useful for a clear understanding

  16. Risk-based safety indicators

    Sedlak, J.

    2001-12-01

    The report is structured as follows: 1. Risk-based safety indicators: Typology of risk-based indicators (RBIs); Tools for defining RBIs; Requirements for the PSA model; Data sources for RBIs; Types of risks monitored; RBIs and operational safety indicators; Feedback from operating experience; PSO model modification for RBIs; RBI categorization; RBI assessment; RBI applications; Suitable RBI applications. 2. Proposal for risk-based indicators: Acquiring information from operational experience; Method of acquiring safety relevance coefficients for the systems from a PSA model; Indicator definitions; On-line indicators. 3. Annex: Application of RBIs worldwide. (P.A.)

  17. Reconsidering Community-based Retailing

    Maughan, Rebecca; O'Driscoll, Aidan

    2012-01-01

    One of the areas with great potential for economic, social and environmental benefit is community-based retailing. The concept of community based retailing can incorporate a number of different tenets. We suggest that it is retailing that is based close to the community it serves, usually within the town or village centre rather than out-of-town locations, and which is composed of a diverse range of small and medium sized business that are often independently or co-operatively owned. These co...

  18. FEMA DFIRM Base Flood Elevations

    Minnesota Department of Natural Resources — The Base Flood Elevation (BFE) table is required for any digital data where BFE lines will be shown on the corresponding Flood Insurance Rate Map (FIRM). Normally,...

  19. Oil-based paint poisoning

    Paint - oil-based - poisoning ... Hydrocarbons are the primary poisonous ingredient in oil paints. Some oil paints have heavy metals such as lead, mercury, cobalt, and barium added as pigment. These heavy metals can cause additional ...

  20. Imprinted silicon-based nanophotonics

    Borel, Peter Ingo; Olsen, Brian Bilenberg; Frandsen, Lars Hagedorn

    2007-01-01

    We demonstrate and optically characterize silicon-on-insulator based nanophotonic devices fabricated by nanoimprint lithography. In our demonstration, we have realized ordinary and topology-optimized photonic crystal waveguide structures. The topology-optimized structures require lateral pattern ...

  1. Generalized eigenvalue based spectrum sensing

    Shakir, Muhammad; Alouini, Mohamed-Slim

    2012-01-01

    of the decision threshold of the respective detectors. The decision threshold has been calculated in a closed form which is based on the approximation of Cumulative Distribution Functions (CDFs) of the respective test statistics. In this context, we exchange

  2. Reliability-Based Code Calibration

    Faber, M.H.; Sørensen, John Dalsgaard

    2003-01-01

    The present paper addresses fundamental concepts of reliability based code calibration. First basic principles of structural reliability theory are introduced and it is shown how the results of FORM based reliability analysis may be related to partial safety factors and characteristic values....... Thereafter the code calibration problem is presented in its principal decision theoretical form and it is discussed how acceptable levels of failure probability (or target reliabilities) may be established. Furthermore suggested values for acceptable annual failure probabilities are given for ultimate...... and serviceability limit states. Finally the paper describes the Joint Committee on Structural Safety (JCSS) recommended procedure - CodeCal - for the practical implementation of reliability based code calibration of LRFD based design codes....

  3. Cage-based performance capture

    Savoye, Yann

    2014-01-01

    Nowadays, highly-detailed animations of live-actor performances are increasingly easier to acquire and 3D Video has reached considerable attentions in visual media production. In this book, we address the problem of extracting or acquiring and then reusing non-rigid parametrization for video-based animations. At first sight, a crucial challenge is to reproduce plausible boneless deformations while preserving global and local captured properties of dynamic surfaces with a limited number of controllable, flexible and reusable parameters. To solve this challenge, we directly rely on a skin-detached dimension reduction thanks to the well-known cage-based paradigm. First, we achieve Scalable Inverse Cage-based Modeling by transposing the inverse kinematics paradigm on surfaces. Thus, we introduce a cage inversion process with user-specified screen-space constraints. Secondly, we convert non-rigid animated surfaces into a sequence of optimal cage parameters via Cage-based Animation Conversion. Building upon this re...

  4. Physical bases of nuclear medicine

    Isabelle, D.B.; Ducassou, D.

    1975-01-01

    The physical bases of nuclear medicine are outlined in several chapters devoted successively to: atomic and nuclear structures; nuclear reactions; radioactiity laws; a study of different types of disintegration; the interactions of radiations with matter [fr

  5. GCCS Spatial Data Base Module

    Bell, Paul

    1998-01-01

    .... JMTK is divided into three primary areas: (1) Visual, (2) Analysis (non-visual), and (3) Spatial Data Base (SDBM). The primary objective of the SDBM effort is to define, design, develop and test mapping, charting and geodesy...

  6. Surface stress-based biosensors.

    Sang, Shengbo; Zhao, Yuan; Zhang, Wendong; Li, Pengwei; Hu, Jie; Li, Gang

    2014-01-15

    Surface stress-based biosensors, as one kind of label-free biosensors, have attracted lots of attention in the process of information gathering and measurement for the biological, chemical and medical application with the development of technology and society. This kind of biosensors offers many advantages such as short response time (less than milliseconds) and a typical sensitivity at nanogram, picoliter, femtojoule and attomolar level. Furthermore, it simplifies sample preparation and testing procedures. In this work, progress made towards the use of surface stress-based biosensors for achieving better performance is critically reviewed, including our recent achievement, the optimally circular membrane-based biosensors and biosensor array. The further scientific and technological challenges in this field are also summarized. Critical remark and future steps towards the ultimate surface stress-based biosensors are addressed. Copyright © 2013 Elsevier B.V. All rights reserved.

  7. Industry Based Survey (IBS) Yellowtail

    National Oceanic and Atmospheric Administration, Department of Commerce — The "Southern New England Yellowtail Flounder Industry-Based Survey" was a collaboration between the Rhode Island Division of Fish and Wildlife and the fishing...

  8. Industry Based Survey (IBS) Cod

    National Oceanic and Atmospheric Administration, Department of Commerce — The "Gulf of Maine Atlantic Cod Industry-Based Survey" was a collaboration of the Massachusetts Division of Marine Fisheries and the fishing industry, with support...

  9. US Air Force Base Observations

    National Oceanic and Atmospheric Administration, Department of Commerce — Hourly observations taken by U.S. Air Force personnel at bases in the United States and around the world. Foreign observations concentrated in the Middle East and...

  10. Studying Sensing-Based Systems

    Kjærgaard, Mikkel Baun

    2013-01-01

    Recent sensing-based systems involve a multitude of users, devices, and places. These types of systems challenge existing approaches for conducting valid system evaluations. Here, the author discusses such evaluation challenges and revisits existing system evaluation methodologies....

  11. Structure-Based Turbulence Model

    Reynolds, W

    2000-01-01

    .... Maire carried out this work as part of his Phi) research. During the award period we began to explore ways to simplify the structure-based modeling so that it could be used in repetitive engineering calculations...

  12. SAT-Based Software Certification

    Chaki, Sagar

    2006-01-01

    ... predicate abstraction and validated by generating and proving verification conditions. In addition, the first part of the report proposes the use of theorem provers based on Boolean propositional satisfiability (SAT...

  13. Consent Based Verification System (CBSV)

    Social Security Administration — CBSV is a fee-based service offered by SSA's Business Services Online (BSO). It is used by private companies to verify the SSNs of their customers and clients that...

  14. NORTHWOODS Wildlife Habitat Data Base

    Mark D. Nelson; Janine M. Benyus; Richard R. Buech

    1992-01-01

    Wildlife habitat data from seven Great Lakes National Forests were combined into a wildlife-habitat matrix named NORTHWOODS. Several electronic file formats of NORTHWOODS data base and documentation are available on floppy disks for microcomputers.

  15. Forming lead-based anodes

    Ogorodnichuk, V I; Voitsekhovich, R I

    1972-01-01

    Lead-based anodes can be produced by forming a layer of lead dioxide by chemical treatment in a solution of sulfuric acid in potassium permanganate at 80 to 100/sup 0/. The solution is mixed by compressed air. (RWR)

  16. Base Flood Elevation (BFE) Lines

    Department of Homeland Security — The Base Flood Elevation (BFE) table is required for any digital data where BFE lines will be shown on the corresponding Flood Insurance Rate Map (FIRM). Normally if...

  17. Hospital Value-Based Purchasing

    U.S. Department of Health & Human Services — Hospital Value-Based Purchasing (VBP) is part of the Centers for Medicare and Medicaid Services (CMS) long-standing effort to link Medicares payment system to a...

  18. Chip-based droplet sorting

    Beer, Neil Reginald; Lee, Abraham; Hatch, Andrew

    2017-11-21

    A non-contact system for sorting monodisperse water-in-oil emulsion droplets in a microfluidic device based on the droplet's contents and their interaction with an applied electromagnetic field or by identification and sorting.

  19. Consumption-based Equity Valuation

    Bach, Christian; Christensen, Peter O.

    2016-01-01

    implementations of standard valuation models, both in terms of median absolute valuation errors (MAVE) and in terms of excess returns on simple investment strategies based on the differences between model and market prices. The CCAPM-based valuation model yields a significantly lower MAVE than the best performing...... standard valuation model. Both types of models can identify investment strategies with subsequent excess returns. The CCAPM-based valuation model yields time-series of realized hedge returns with more and higher positive returns and fewer and less negative returns compared with the time-series of realized...... through a risk-adjusted cost of equity in the denominator. The risk adjustments are derived based on assumptions about the time-series properties of residual income returns and aggregate consumption rather than on historical stock returns. We compare the performance of the model with several...

  20. Consumption-based Equity Valuation

    Bach, Christian; Christensen, Peter Ove

    2013-01-01

    the performance of the model with several implementations of standard valuation models, both in terms of absolute valuation errors, and in terms of the returns on simple investment strategies based on the differences between model and market prices in the respective valuation models. The CCAPM-based valuation...... model performs substantially better than the best performing standard valuation model when comparing absolute valuation errors. Both types of models are able to identify investment strategies with subsequent excess returns but also in this setting, the CCAPM-based valuation model outperforms...... residual income for risk in the numerator rather than through a risk-adjusted cost of equity in the denominator. The risk-adjustments are derived based on assumptions about the time-series properties of residual income returns and aggregate consumption rather than on historical stock returns. We compare...

  1. Microprocessor based techniques at CESR

    Giannini, G.; Cornell Univ., Ithaca, NY

    1981-01-01

    Microprocessor based systems succesfully used in connection with the High Energy Physics experimental program at the Cornell Electron Storage Ring are described. The multiprocessor calibration system for the CUSB calorimeter is analyzed in view of present and future applications. (orig.)

  2. PHYSIOLOGY OF ACID BASE BALANCE

    Awati

    2014-12-01

    Full Text Available Acid-base, electrolyte, and metabolic disturbances are common in the intensive care unit. Almost all critically ill patients often suffer from compound acid-base and electrolyte disorders. Successful evaluation and management of such patients requires recognition of common patterns (e.g., metabolic acidosis and the ability to dissect one disorder from another. The intensivists needs to identify and correct these condition with the easiest available tools as they are the associated with multiorgan failure. Understanding the elements of normal physiology in these areas is very important so as to diagnose the pathological condition and take adequate measures as early as possible. Arterial blood gas analysis is one such tool for early detection of acid base disorder. Physiology of acid base is complex and here is the attempt to simplify it in our day to day application for the benefit of critically ill patients.

  3. Eye-based head gestures

    Mardanbegi, Diako; Witzner Hansen, Dan; Pederson, Thomas

    2012-01-01

    A novel method for video-based head gesture recognition using eye information by an eye tracker has been proposed. The method uses a combination of gaze and eye movement to infer head gestures. Compared to other gesture-based methods a major advantage of the method is that the user keeps the gaze...... mobile phone screens. The user study shows that the method detects a set of defined gestures reliably.......A novel method for video-based head gesture recognition using eye information by an eye tracker has been proposed. The method uses a combination of gaze and eye movement to infer head gestures. Compared to other gesture-based methods a major advantage of the method is that the user keeps the gaze...

  4. Base compaction specification feasibility analysis.

    2012-12-01

    The objective of this research is to establish the technical engineering and cost : analysis concepts that will enable WisDOT management to objectively evaluate the : feasibility of switching construction specification philosophies for aggregate base...

  5. Polyethylene-Based Tadpole Copolymers

    Alkayal, Nazeeha; Zhang, Zhen; Bilalis, Panayiotis; Gnanou, Yves; Hadjichristidis, Nikolaos

    2017-01-01

    Novel well-defined polyethylene-based tadpole copolymers ((c-PE)-b-PS, PE: polyethylene, PS: polystyrene) with ring PE head and linear PS tail are synthesized by combining polyhomologation, atom transfer radical polymerization (ATRP), and Glaser

  6. Knowledge-based Telecom Industry

    Vinje, Villeman; Nordkvelde, Marius

    2011-01-01

    BI Norwegian School of Management is conducting a national research project entitled “A knowledge-based Norway”. Thirteen major knowledge-based industries in Norway are being analyzed under the auspices of the project. This study assesses the underlying properties of a global knowledge hub to examine the extent to which the Norwegian telecom industry – which encompasses all telecom firms located in Norway regardless of ownership – constitutes a global knowledge hub. It commences with a ge...

  7. Power Reactor Embrittlement Data Base

    Kam, F.B.K.; Stallmann, F.W.; Wang, J.A.

    1990-01-01

    Regulatory and research evaluations of embrittlement prediction models and of vessel integrity under load can be greatly expedited by the use of a well designed, computerized embrittlement data base. The Power Reactor Embrittlement Data Base (PR-EDB) is a comprehensive collection of data from surveillance reports and other published reports of commercial nuclear reactors. The uses of the data base require that as many different data as available are collected from as many sources as possible with complete references and that subsets of relevant data can be easily retrieved and processed. The objectives of this NRC-sponsored program are the following: (1) to compile and to verify the quality of the PR-EDB; (2) to provide user-friendly software to access and process the data; (3) to explore or confirm embrittlement prediction models; and (4) to interact with standards organizations to provide the technical bases for voluntary consensus standards that can be used in regulatory guides, standard review plans, and codes. To achieve these goals, the data base architecture was designed after much discussion and planning with prospective users, namely, material scientists and members of the research staff. The current compilation of the PR-EDB (Version 1) contains results from surveillance capsule reports of 78 reactors with 381 data points for 110 different irradiated base materials and 161 data points for 79 different welds. Results from heat-affected zone materials are also listed. The time and effort required to process and evaluate different types of data in the PR-EDB have been drastically reduced from previous data bases. The Electric Power Research Institute (EPRI), reactor vendors, and utilities are in the process of providing back-up quality assurance checks of PR-EDB and will be supplementing the data base with additional data and documentation

  8. [Bases and methods of suturing].

    Vogt, P M; Altintas, M A; Radtke, C; Meyer-Marcotty, M

    2009-05-01

    If pharmaceutic modulation of scar formation does not improve the quality of the healing process over conventional healing, the surgeon must rely on personal skill and experience. Therefore a profound knowledge of wound healing based on experimental and clinical studies supplemented by postsurgical means of scar management and basic techniques of planning incisions, careful tissue handling, and thorough knowledge of suturing remain the most important ways to avoid abnormal scarring. This review summarizes the current experimental and clinical bases of surgical scar management.

  9. Chevron closing base wedge bunionectomy.

    Bruyn, J M

    1993-01-01

    The Chevron-base wedge Association for Osteosynthesis fixated bunionectomy provides a stable, aggressive correction of the severe hallux abducto valgus deformity. It is intended for the bunion requiring a double osteotomy in order to adequately reduce both intermetatarsal and proximal articular facet angle with minimal shortening and elevation. This article presents the rationale for the procedure, technique, and a 4-year follow-up of six patients with eight Chevron-base wedge bunionectomies.

  10. TFC Base de datos relacionales

    Moreno Pozuelo, Isabel

    2015-01-01

    El objetivo de este proyecto es desarrollar una base de datos relacional que contenga los datos necesarios para realizar la gestión de carteras de inversión. L'objectiu d'aquest projecte és desenvolupar una base de dades relacional que contingui les dades necessàries per realitzar la gestió de carteres d'inversió. Bachelor thesis for the Computer Science program on Databases.

  11. Instance-Based Question Answering

    2006-12-01

    cluster-based query expan- sion, learning answering strategies, machine learning in NLP To my wife Monica Abstract During recent years, question...process is typically tedious and involves expertise in crafting and implement- ing these models (e.g. rule-based), utilizing NLP resources, and...questions. For languages that use capitalization (e.g. not Chinese or Arabic ) for named entities, IBQA can make use of NE classing (e.g. “Bob Marley

  12. System Based Code: Principal Concept

    Yasuhide Asada; Masanori Tashimo; Masahiro Ueta

    2002-01-01

    This paper introduces a concept of the 'System Based Code' which has initially been proposed by the authors intending to give nuclear industry a leap of progress in the system reliability, performance improvement, and cost reduction. The concept of the System Based Code intends to give a theoretical procedure to optimize the reliability of the system by administrating every related engineering requirement throughout the life of the system from design to decommissioning. (authors)

  13. RSA-Based Secret Handshakes

    Vergnaud , Damien

    2006-01-01

    A secret handshake mechanism allows two entities, members of a same group, to authenticate each other secretly. This primitive was introduced recently by Balfanz, Durfee, Shankar, Smetters, Staddon and Wong and, so far, all the schemes proposed are based on discrete log systems. This paper proposes three new secret handshake protocols secure against active impersonator and detector adversaries. Inspired by two RSA-based key agreement protocols introduced by Okamoto and Tanaka in 1989 and Gira...

  14. Evidence-based cancer imaging

    Shinagare, Atul B.; Khorasani, Ramin [Dept. of Radiology, Brigham and Women' s Hospital, Boston (Korea, Republic of)

    2017-01-15

    With the advances in the field of oncology, imaging is increasingly used in the follow-up of cancer patients, leading to concerns about over-utilization. Therefore, it has become imperative to make imaging more evidence-based, efficient, cost-effective and equitable. This review explores the strategies and tools to make diagnostic imaging more evidence-based, mainly in the context of follow-up of cancer patients.

  15. Evidence based medical imaging (EBMI)

    Smith, Tony

    2008-01-01

    Background: The evidence based paradigm was first described about a decade ago. Previous authors have described a framework for the application of evidence based medicine which can be readily adapted to medical imaging practice. Purpose: This paper promotes the application of the evidence based framework in both the justification of the choice of examination type and the optimisation of the imaging technique used. Methods: The framework includes five integrated steps: framing a concise clinical question; searching for evidence to answer that question; critically appraising the evidence; applying the evidence in clinical practice; and, evaluating the use of revised practices. Results: This paper illustrates the use of the evidence based framework in medical imaging (that is, evidence based medical imaging) using the examples of two clinically relevant case studies. In doing so, a range of information technology and other resources available to medical imaging practitioners are identified with the intention of encouraging the application of the evidence based paradigm in radiography and radiology. Conclusion: There is a perceived need for radiographers and radiologists to make greater use of valid research evidence from the literature to inform their clinical practice and thus provide better quality services

  16. Entanglement in mutually unbiased bases

    Wiesniak, M; Zeilinger, A [Vienna Center for Quantum Science and Technology (VCQ), Faculty of Physics, University of Vienna, Boltzmanngasse 5, 1090 Vienna (Austria); Paterek, T, E-mail: tomasz.paterek@nus.edu.sg [Centre for Quantum Technologies, National University of Singapore, 3 Science Drive 2, 117543 Singapore (Singapore)

    2011-05-15

    One of the essential features of quantum mechanics is that most pairs of observables cannot be measured simultaneously. This phenomenon manifests itself most strongly when observables are related to mutually unbiased bases. In this paper, we shed some light on the connection between mutually unbiased bases and another essential feature of quantum mechanics, quantum entanglement. It is shown that a complete set of mutually unbiased bases of a bipartite system contains a fixed amount of entanglement, independent of the choice of the set. This has implications for entanglement distribution among the states of a complete set. In prime-squared dimensions we present an explicit experiment-friendly construction of a complete set with a particularly simple entanglement distribution. Finally, we describe the basic properties of mutually unbiased bases composed of product states only. The constructions are illustrated with explicit examples in low dimensions. We believe that the properties of entanglement in mutually unbiased bases may be one of the ingredients to be taken into account to settle the question of the existence of complete sets. We also expect that they will be relevant to applications of bases in the experimental realization of quantum protocols in higher-dimensional Hilbert spaces.

  17. A comprehensive physiologically based pharmacokinetic ...

    Published physiologically based pharmacokinetic (PBPK) models from peer-reviewed articles are often well-parameterized, thoroughly-vetted, and can be utilized as excellent resources for the construction of models pertaining to related chemicals. Specifically, chemical-specific parameters and in vivo pharmacokinetic data used to calibrate these published models can act as valuable starting points for model development of new chemicals with similar molecular structures. A knowledgebase for published PBPK-related articles was compiled to support PBPK model construction for new chemicals based on their close analogues within the knowledgebase, and a web-based interface was developed to allow users to query those close analogues. A list of 689 unique chemicals and their corresponding 1751 articles was created after analysis of 2,245 PBPK-related articles. For each model, the PMID, chemical name, major metabolites, species, gender, life stages and tissue compartments were extracted from the published articles. PaDEL-Descriptor, a Chemistry Development Kit based software, was used to calculate molecular fingerprints. Tanimoto index was implemented in the user interface as measurement of structural similarity. The utility of the PBPK knowledgebase and web-based user interface was demonstrated using two case studies with ethylbenzene and gefitinib. Our PBPK knowledgebase is a novel tool for ranking chemicals based on similarities to other chemicals associated with existi

  18. Home-based versus centre-based cardiac rehabilitation.

    Taylor, Rod S; Dalal, Hayes; Jolly, Kate; Moxham, Tiffany; Zawada, Anna

    2010-01-20

    The burden of cardiovascular disease world-wide is one of great concern to patients and health care agencies alike. Traditionally centre-based cardiac rehabilitation (CR) programmes are offered to individuals after cardiac events to aid recovery and prevent further cardiac illness. Home-based cardiac rehabilitation programmes have been introduced in an attempt to widen access and participation. To determine the effectiveness of home-based cardiac rehabilitation programmes compared with supervised centre-based cardiac rehabilitation on mortality and morbidity, health-related quality of life and modifiable cardiac risk factors in patients with coronary heart disease. We updated the search of a previous review by searching the Cochrane Central Register of Controlled Trials (CENTRAL) in The Cochrane Library (2007, Issue 4), MEDLINE, EMBASE and CINAHL from 2001 to January 2008. We checked reference lists and sought advice from experts. No language restrictions were applied. Randomised controlled trials (RCTs) that compared centre-based cardiac rehabilitation (e.g. hospital, gymnasium, sports centre) with home-based programmes, in adults with myocardial infarction, angina, heart failure or who had undergone revascularisation. Studies were selected independently by two reviewers, and data extracted by a single reviewer and checked by a second one. Authors were contacted where possible to obtain missing information. Twelve studies (1,938 participants) met the inclusion criteria. The majority of studies recruited a lower risk patient following an acute myocardial infarction (MI) and revascularisation. There was no difference in outcomes of home- versus centre-based cardiac rehabilitation in mortality risk ratio (RR) was1.31 (95% confidence interval (C) 0.65 to 2.66), cardiac events, exercise capacity standardised mean difference (SMD) -0.11 (95% CI -0.35 to 0.13), as well as in modifiable risk factors (systolic blood pressure; diastolic blood pressure; total cholesterol

  19. From conventional software based systems to knowledge based systems

    Bologna, S.

    1995-01-01

    Even if todays nuclear power plants have a very good safety record, there is a continuous search for still improving safety. One direction of this effort address operational safety, trying to improve the handling of disturbances and accidents partly by further automation, partly by creating a better control room environment, providing the operator with intelligent support systems to help in the decision making process. Introduction of intelligent computerised operator support systems has proved to be an efficient way of improving the operators performance. A number of systems have been developed worldwide, assisting in tasks like process fault detection and diagnosis, selection and implementation of proper remedial actions. Unfortunately, the use of Knowledge Based Systems (KBSs), introduces a new dimension to the problem of the licensing process. KBSs, despite the different technology employed, are still nothing more than a computer program. Unfortunately, quite a few people building knowledge based systems seem to ignore the many good programming practices that have evolved over the years for producing traditional computer programs. In this paper the author will try to point out similarities and differences between conventional software based systems, and knowledge based systems, introducing also the concept of model based reasoning. (orig.) (25 refs., 2 figs.)

  20. From scientifically based research to evidence based learning

    Rosa Cera

    2016-02-01

    Full Text Available This essay is a reflection on the peculiarities of the scientifically based research and on the distinctive elements of the EBL (evidence based learning, methodology used in the study on the “Relationship between Metacognition, Self-efficacy and Self-regulation in Learning”. The EBL method, based on the standardization of data, explains how the students’ learning experience can be considered as a set of “data” and can be used to explain how and when the research results can be considered generalizable and transferable to other learning situations. The reflections present in this study have also allowed us to illustrate the impact that its results have had on the micro and macro level of reality. They helped to fill in the gaps concerning the learning/teaching processes, contributed to the enrichment of the scientific literature on this subject and allowed to establish standards through rigorous techniques such as systematic reviews and meta-analysis.

  1. Nasal base narrowing: the combined alar base excision technique.

    Foda, Hossam M T

    2007-01-01

    To evaluate the role of the combined alar base excision technique in narrowing the nasal base and correcting excessive alar flare. The study included 60 cases presenting with a wide nasal base and excessive alar flaring. The surgical procedure combined an external alar wedge resection with an internal vestibular floor excision. All cases were followed up for a mean of 32 (range, 12-144) months. Nasal tip modification and correction of any preexisting caudal septal deformities were always completed before the nasal base narrowing. The mean width of the external alar wedge excised was 7.2 (range, 4-11) mm, whereas the mean width of the sill excision was 3.1 (range, 2-7) mm. Completing the internal excision first resulted in a more conservative external resection, thus avoiding any blunting of the alar-facial crease. No cases of postoperative bleeding, infection, or keloid formation were encountered, and the external alar wedge excision healed with an inconspicuous scar that was well hidden in the depth of the alar-facial crease. Finally, the risk of notching of the alar rim, which can occur at the junction of the external and internal excisions, was significantly reduced by adopting a 2-layered closure of the vestibular floor (P = .01). The combined alar base excision resulted in effective narrowing of the nasal base with elimination of excessive alar flare. Commonly feared complications, such as blunting of the alar-facial crease or notching of the alar rim, were avoided by using simple modifications in the technique of excision and closure.

  2. Generalized eigenvalue based spectrum sensing

    Shakir, Muhammad

    2012-01-01

    Spectrum sensing is one of the fundamental components in cognitive radio networks. In this chapter, a generalized spectrum sensing framework which is referred to as Generalized Mean Detector (GMD) has been introduced. In this context, we generalize the detectors based on the eigenvalues of the received signal covariance matrix and transform the eigenvalue based spectrum sensing detectors namely: (i) the Eigenvalue Ratio Detector (ERD) and two newly proposed detectors which are referred to as (ii) the GEometric Mean Detector (GEMD) and (iii) the ARithmetic Mean Detector (ARMD) into an unified framework of generalize spectrum sensing. The foundation of the proposed framework is based on the calculation of exact analytical moments of the random variables of the decision threshold of the respective detectors. The decision threshold has been calculated in a closed form which is based on the approximation of Cumulative Distribution Functions (CDFs) of the respective test statistics. In this context, we exchange the analytical moments of the two random variables of the respective test statistics with the moments of the Gaussian (or Gamma) distribution function. The performance of the eigenvalue based detectors is compared with the several traditional detectors including the energy detector (ED) to validate the importance of the eigenvalue based detectors and the performance of the GEMD and the ARMD particularly in realistic wireless cognitive radio network. Analytical and simulation results show that the newly proposed detectors yields considerable performance advantage in realistic spectrum sensing scenarios. Moreover, the presented results based on proposed approximation approaches are in perfect agreement with the empirical results. © 2012 Springer Science+Business Media Dordrecht.

  3. Characteristic properties of Fibonacci-based mutually unbiased bases

    Seyfarth, Ulrich; Alber, Gernot [Institut fuer Angewandte Physik, Technische Universitaet Darmstadt, 64289 Darmstadt (Germany); Ranade, Kedar [Institut fuer Quantenphysik, Universitaet Ulm, Albert-Einstein-Allee 11, 89069 Ulm (Germany)

    2012-07-01

    Complete sets of mutually unbiased bases (MUBs) offer interesting applications in quantum information processing ranging from quantum cryptography to quantum state tomography. Different construction schemes provide different perspectives on these bases which are typically also deeply connected to various mathematical research areas. In this talk we discuss characteristic properties resulting from a recently established connection between construction methods for cyclic MUBs and Fibonacci polynomials. As a remarkable fact this connection leads to construction methods which do not involve any relations to mathematical properties of finite fields.

  4. Orthogonally Based Digital Content Management Applicable to Projects-bases

    Daniel MILODIN

    2009-01-01

    Full Text Available There is defined the concept of digital content. The requirements of an efficient management of the digital content are established. There are listed the quality characteristics of digital content. Orthogonality indicators of digital content are built up. They are meant to measure the image, the sound as well as the text orthogonality as well. Projects-base concept is introduced. There is presented the model of structuring the content in order to maximize orthogonality via a convergent iterative process. The model is instantiated for the digital content of a projects-base. It is introduced the application used to test the model. The paper ends with conclusions.

  5. Thermal insulation coating based on water-based polymer dispersion

    Panchenko Iuliia

    2018-01-01

    Full Text Available For Russia, due to its long winter period, improvement of thermal insulation properties of envelope structures by applying thermal insulation paint and varnish coating to its inner surface is considered perspective. Thermal insulation properties of such coatings are provided by adding aluminosilicate microspheres and aluminum pigment to their composition. This study was focused on defining the effect of hollow aluminosilicate microspheres and aluminum pigment on the paint thermal insulation coating based on water-based polymer dispersion and on its optimum filling ratio. The optimum filling ratio was determined using the method of critical pigment volume concentration (CPVC. The optimum filling ratio was found equal to 55%.

  6. Automated knowledge-base refinement

    Mooney, Raymond J.

    1994-01-01

    Over the last several years, we have developed several systems for automatically refining incomplete and incorrect knowledge bases. These systems are given an imperfect rule base and a set of training examples and minimally modify the knowledge base to make it consistent with the examples. One of our most recent systems, FORTE, revises first-order Horn-clause knowledge bases. This system can be viewed as automatically debugging Prolog programs based on examples of correct and incorrect I/O pairs. In fact, we have already used the system to debug simple Prolog programs written by students in a programming language course. FORTE has also been used to automatically induce and revise qualitative models of several continuous dynamic devices from qualitative behavior traces. For example, it has been used to induce and revise a qualitative model of a portion of the Reaction Control System (RCS) of the NASA Space Shuttle. By fitting a correct model of this portion of the RCS to simulated qualitative data from a faulty system, FORTE was also able to correctly diagnose simple faults in this system.

  7. Content Based Searching for INIS

    Jain, V.; Jain, R.K.

    2016-01-01

    Full text: Whatever a user wants is available on the internet, but to retrieve the information efficiently, a multilingual and most-relevant document search engine is a must. Most current search engines are word based or pattern based. They do not consider the meaning of the query posed to them; purely based on the keywords of the query; no support of multilingual query and and dismissal of nonrelevant results. Current information-retrieval techniques either rely on an encoding process, using a certain perspective or classification scheme, to describe a given item, or perform a full-text analysis, searching for user-specified words. Neither case guarantees content matching because an encoded description might reflect only part of the content and the mere occurrence of a word does not necessarily reflect the document’s content. For general documents, there doesn’t yet seem to be a much better option than lazy full-text analysis, by manually going through those endless results pages. In contrast to this, new search engine should extract the meaning of the query and then perform the search based on this extracted meaning. New search engine should also employ Interlingua based machine translation technology to present information in the language of choice of the user. (author

  8. Case-Base Maintenance for CCBR-Based Process Evolution

    Weber, B.; Reichert, M.U.; Wild, W.; Roth-Berghofer, T.; Göker, M.H.; Güvenir, H.A.

    2006-01-01

    The success of a company more and more depends on its ability to flexibly and quickly react to changes. Combining process management techniques and conversational case-based reasoning (CCBR) allows for flexibly aligning the business processes to new requirements by providing integrated process life

  9. Mo-Si-B-Based Coatings for Ceramic Base Substrates

    Perepezko, John Harry (Inventor); Sakidja, Ridwan (Inventor); Ritt, Patrick (Inventor)

    2015-01-01

    Alumina-containing coatings based on molybdenum (Mo), silicon (Si), and boron (B) ("MoSiB coatings") that form protective, oxidation-resistant scales on ceramic substrate at high temperatures are provided. The protective scales comprise an aluminoborosilicate glass, and may additionally contain molybdenum. Two-stage deposition methods for forming the coatings are also provided.

  10. Event-Based Conceptual Modeling

    Bækgaard, Lars

    The paper demonstrates that a wide variety of event-based modeling approaches are based on special cases of the same general event concept, and that the general event concept can be used to unify the otherwise unrelated fields of information modeling and process modeling. A set of event......-based modeling approaches are analyzed and the results are used to formulate a general event concept that can be used for unifying the seemingly unrelated event concepts. Events are characterized as short-duration processes that have participants, consequences, and properties, and that may be modeled in terms...... of information structures. The general event concept can be used to guide systems analysis and design and to improve modeling approaches....

  11. Nickel and cobalt base alloys

    Houlle, P.

    1994-01-01

    Nickel base alloys have a good resistance to pitting, cavernous or cracks corrosion. Nevertheless, all the nickel base alloys are not equivalent. Some differences exit between all the families (Ni, Ni-Cu, Ni-Cr-Fe, Ni-Cr-Fe-Mo/W-Cu, Ni-Cr-Mo/W, Ni-Mo). Cobalt base alloys in corrosive conditions are generally used for its wear and cracks resistance, with a compromise to its localised corrosion resistance properties. The choice must be done from the perfect knowledge of the corrosive medium and of the alloys characteristics (chemical, metallurgical). A synthesis of the corrosion resistance in three medium (6% FeCl 3 , 4% NaCl + 1% HCl + 0.1% Fe 2 (SO 4 ) 3 , 11.5% H 2 SO 4 + 1.2% HCl + 1% Fe 2 (SO 4 ) 3 + 1% CuCl 2 ) is presented. (A.B.). 11 refs., 1 fig., 12 tabs

  12. Laser-powered lunar base

    Costen, R.; Humes, D.H.; Walker, G.H.; Williams, M.D.; Deyoung, R.J.

    1989-01-01

    The objective was to compare a nuclear reactor-driven Sterling engine lunar base power source to a laser-to-electric converter with orbiting laser power station, each providing 1 MW of electricity to the lunar base. The comparison was made on the basis of total mass required in low-Earth-orbit for each system. This total mass includes transportation mass required to place systems in low-lunar orbit or on the lunar surface. The nuclear reactor with Sterling engines is considered the reference mission for lunar base power and is described first. The details of the laser-to-electric converter and mass are discussed. The next two solar-driven high-power laser concepts, the diode array laser or the iodine laser system, are discussed with associated masses in low-lunar-orbit. Finally, the payoff for laser-power beaming is summarized

  13. Mitochondrial base excision repair assays

    Maynard, Scott; de Souza-Pinto, Nadja C; Scheibye-Knudsen, Morten

    2010-01-01

    The main source of mitochondrial DNA (mtDNA) damage is reactive oxygen species (ROS) generated during normal cellular metabolism. The main mtDNA lesions generated by ROS are base modifications, such as the ubiquitous 8-oxoguanine (8-oxoG) lesion; however, base loss and strand breaks may also occur....... Many human diseases are associated with mtDNA mutations and thus maintaining mtDNA integrity is critical. All of these lesions are repaired primarily by the base excision repair (BER) pathway. It is now known that mammalian mitochondria have BER, which, similarly to nuclear BER, is catalyzed by DNA...... glycosylases, AP endonuclease, DNA polymerase (POLgamma in mitochondria) and DNA ligase. This article outlines procedures for measuring oxidative damage formation and BER in mitochondria, including isolation of mitochondria from tissues and cells, protocols for measuring BER enzyme activities, gene...

  14. Tune-Based Halo Diagnostics

    Cameron, Peter

    2003-01-01

    Tune-based halo diagnostics can be divided into two categories -- diagnostics for halo prevention, and diagnostics for halo measurement. Diagnostics for halo prevention are standard fare in accumulators, synchrotrons, and storage rings, and again can be divided into two categories -- diagnostics to measure the tune distribution (primarily to avoid resonances), and diagnostics to identify instabilities (which will not be discussed here). These diagnostic systems include kicked (coherent) tune measurement, phase-locked loop (PLL) tune measurement, Schottky tune measurement, beam transfer function (BTF) measurements, and measurement of transverse quadrupole mode envelope oscillations. We refer briefly to tune diagnostics used at RHIC and intended for the SNS, and then present experimental results. Tune-based diagnostics for halo measurement (as opposed to prevention) are considerably more difficult. We present one brief example of tune-based halo measurement

  15. Solar Panel based Milk Pasteurization

    Nielsen, Kirsten Mølgaard; Pedersen, Tom Søndergaard

    This paper treats the subject of analysis, design and development of the control system for a solar panel based milk pasteurization system to be used in small villages in Tanzania. The analysis deals with the demands for an acceptable pasteurization, the varying energy supply and the low cost, low...... complexity, simple user interface and high reliability demands. Based on these demands a concept for the pasteurization system is established and a control system is developed. A solar panel has been constructed and the energy absorption has been tested in Tanzania. Based on the test, the pasteurization...... system is dimensioned. A functional prototype of the pasteurization facility with a capacity of 200 l milk/hour has been developed and tested. The system is prepared for solar panels as the main energy source and is ready for a test in Tanzania....

  16. Solar Panel based Milk Pasteurization

    Nielsen, Kirsten Mølgaard; Pedersen, Tom Søndergaard

    2002-01-01

    This paper treats the subject of analysis, design and development of the control system for a solar panel based milk pasteurization system to be used in small villages in Tanzania. The analysis deals with the demands for an acceptable pasteurization, the varying energy supply and the low cost, low...... complexity, simple user interface and high reliability demands. Based on these demands a concept for the pasteurization system is established and a control system is developed. A solar panel has been constructed and the energy absorption has been tested in Tanzania. Based on the test, the pasteurization...... system is dimensioned. A functional prototype of the pasteurization facility with a capacity of 200 l milk/hour has been developed and tested. The system is prepared for solar panels as the main energy source and is ready for a test in Tanzania....

  17. Home-based COPD psychoeducation

    Bove, D G; Midtgaard, J; Kaldan, G

    2017-01-01

    in reducing symptoms of anxiety and increasing mastery of dyspnoea in patients with advanced chronic obstructive pulmonary disease (COPD). However, we do not know if the intervention is perceived as meaningful and applicable in the everyday life of patients with advanced COPD. METHODS: We conducted a nested......OBJECTIVE: To explore the patients' experiences of a minimal home-based psychoeducative intervention aimed at reducing symptoms of anxiety. BACKGROUND: In a randomised controlled trial (RCT) we have shown that a minimal home-based and nurse-led psychoeducative intervention has a significant effect...... post-trial qualitative study. The study methodology was Interpretive Description as described by Thorne. The study was based on semi-structured interviews with twenty patients from the RCT intervention group i.g. home-living people with a diagnosis of advanced COPD and symptoms of anxiety. RESULTS...

  18. Thiophene-Based Organic Semiconductors.

    Turkoglu, Gulsen; Cinar, M Emin; Ozturk, Turan

    2017-10-24

    Thiophene-based π-conjugated organic small molecules and polymers are the research subject of significant current interest owing to their potential use as organic semiconductors in material chemistry. Despite simple and similar molecular structures, the hitherto reported properties of thiophene-based organic semiconductors are rather diverse. Design of high performance organic semiconducting materials requires a thorough understanding of inter- and intra-molecular interactions, solid-state packing, and the influence of both factors on the charge carrier transport. In this chapter, thiophene-based organic semiconductors, which are classified in terms of their chemical structures and their structure-property relationships, are addressed for the potential applications as organic photovoltaics (OPVs), organic field-effect transistors (OFETs) and organic light emitting diodes (OLEDs).

  19. The Nordic Chernobyl data base

    Walmod-Larsen, O.

    1990-01-01

    The NORDIC CHERNOBYL DATA BASE (NCDB) is established for scientific purposes. The aim is to collect valid data on radiation and radioactivity resulting from measurements made in the Nordic countries particularly after the Chernobyl accident. All information is stored in the so called C-base data system, which can handle input from a variety of sources, including multiple information on each sample. The system permits output to various other computer programs for furhter data treatment. The data base can be used from personal computers and as well as from VAX-computers. Data can be displayed in time- or geographical scales and they can be arranged so as to fit different system for statistical analysis. (author)

  20. Isotope-based quantum information

    G Plekhanov, Vladimir

    2012-01-01

    The present book provides to the main ideas and techniques of the rapid progressing field of quantum information and quantum computation using isotope - mixed materials. It starts with an introduction to the isotope physics and then describes of the isotope - based quantum information and quantum computation. The ability to manipulate and control electron and/or nucleus spin in semiconductor devices provides a new route to expand the capabilities of inorganic semiconductor-based electronics and to design innovative devices with potential application in quantum computing. One of the major challenges towards these objectives is to develop semiconductor-based systems and architectures in which the spatial distribution of spins and their properties can be controlled. For instance, to eliminate electron spin decoherence resulting from hyperfine interaction due to nuclear spin background, isotopically controlled devices are needed (i.e., nuclear spin-depleted). In other emerging concepts, the control of the spatial...