Design requirements for SRB production control system. Volume 3: Package evaluation, modification and hardware

Science.gov (United States)

1981-01-01

The software package evaluation was designed to analyze commercially available, field-proven, production control or manufacturing resource planning management technology and software package. The analysis was conducted by comparing SRB production control software requirements and conceptual system design to software package capabilities. The methodology of evaluation and the findings at each stage of evaluation are described. Topics covered include: vendor listing; request for information (RFI) document; RFI response rate and quality; RFI evaluation process; and capabilities versus requirements.

Introduction to Software Packages. [Final Report.

Science.gov (United States)

Frankel, Sheila, Ed.; And Others

This document provides an introduction to applications computer software packages that support functional managers in government and encourages the use of such packages as an alternative to in-house development. A review of current application areas includes budget/project management, financial management/accounting, payroll, personnel,…

PIV Data Validation Software Package

Science.gov (United States)

Blackshire, James L.

1997-01-01

A PIV data validation and post-processing software package was developed to provide semi-automated data validation and data reduction capabilities for Particle Image Velocimetry data sets. The software provides three primary capabilities including (1) removal of spurious vector data, (2) filtering, smoothing, and interpolating of PIV data, and (3) calculations of out-of-plane vorticity, ensemble statistics, and turbulence statistics information. The software runs on an IBM PC/AT host computer working either under Microsoft Windows 3.1 or Windows 95 operating systems.

Evaluation of high-performance computing software

Energy Technology Data Exchange (ETDEWEB)

Browne, S.; Dongarra, J. [Univ. of Tennessee, Knoxville, TN (United States); Rowan, T. [Oak Ridge National Lab., TN (United States)

1996-12-31

The absence of unbiased and up to date comparative evaluations of high-performance computing software complicates a user`s search for the appropriate software package. The National HPCC Software Exchange (NHSE) is attacking this problem using an approach that includes independent evaluations of software, incorporation of author and user feedback into the evaluations, and Web access to the evaluations. We are applying this approach to the Parallel Tools Library (PTLIB), a new software repository for parallel systems software and tools, and HPC-Netlib, a high performance branch of the Netlib mathematical software repository. Updating the evaluations with feed-back and making it available via the Web helps ensure accuracy and timeliness, and using independent reviewers produces unbiased comparative evaluations difficult to find elsewhere.

A comparison of six software packages for evaluation of solid lung nodules using semi-automated volumetry: What is the minimum increase in size to detect growth in repeated CT examinations

International Nuclear Information System (INIS)

Hoop, Bartjan de; Gietema, Hester; Prokop, Mathias; Ginneken, Bram van; Zanen, Pieter; Groenewegen, Gerard

2009-01-01

We compared interexamination variability of CT lung nodule volumetry with six currently available semi-automated software packages to determine the minimum change needed to detect the growth of solid lung nodules. We had ethics committee approval. To simulate a follow-up examination with zero growth, we performed two low-dose unenhanced CT scans in 20 patients referred for pulmonary metastases. Between examinations, patients got off and on the table. Volumes of all pulmonary nodules were determined on both examinations using six nodule evaluation software packages. Variability (upper limit of the 95% confidence interval of the Bland-Altman plot) was calculated for nodules for which segmentation was visually rated as adequate. We evaluated 214 nodules (mean diameter 10.9 mm, range 3.3 mm-30.0 mm). Software packages provided adequate segmentation in 71% to 86% of nodules (p < 0.001). In case of adequate segmentation, variability in volumetry between scans ranged from 16.4% to 22.3% for the various software packages. Variability with five to six software packages was significantly less for nodules ≥8 mm in diameter (range 12.9%-17.1%) than for nodules <8 mm (range 18.5%-25.6%). Segmented volumes of each package were compared to each of the other packages. Systematic volume differences were detected in 11/15 comparisons. This hampers comparison of nodule volumes between software packages. (orig.)

Nested Cohort - R software package

Science.gov (United States)

NestedCohort is an R software package for fitting Kaplan-Meier and Cox Models to estimate standardized survival and attributable risks for studies where covariates of interest are observed on only a sample of the cohort.

Vertical bone measurements from cone beam computed tomography images using different software packages

International Nuclear Information System (INIS)

Vasconcelos, Taruska Ventorini; Neves, Frederico Sampaio; Moraes, Livia Almeida Bueno; Freitas, Deborah Queiroz

2015-01-01

This article aimed at comparing the accuracy of linear measurement tools of different commercial software packages. Eight fully edentulous dry mandibles were selected for this study. Incisor, canine, premolar, first molar and second molar regions were selected. Cone beam computed tomography (CBCT) images were obtained with i-CAT Next Generation. Linear bone measurements were performed by one observer on the cross-sectional images using three different software packages: XoranCat®, OnDemand3D® and KDIS3D®, all able to assess DICOM images. In addition, 25% of the sample was reevaluated for the purpose of reproducibility. The mandibles were sectioned to obtain the gold standard for each region. Intraclass coefficients (ICC) were calculated to examine the agreement between the two periods of evaluation; the one-way analysis of variance performed with the post-hoc Dunnett test was used to compare each of the software-derived measurements with the gold standard. The ICC values were excellent for all software packages. The least difference between the software-derived measurements and the gold standard was obtained with the OnDemand3D and KDIS3D (‑0.11 and ‑0.14 mm, respectively), and the greatest, with the XoranCAT (+0.25 mm). However, there was no statistical significant difference between the measurements obtained with the different software packages and the gold standard (p > 0.05). In conclusion, linear bone measurements were not influenced by the software package used to reconstruct the image from CBCT DICOM data. (author)

Vertical bone measurements from cone beam computed tomography images using different software packages

Energy Technology Data Exchange (ETDEWEB)

Vasconcelos, Taruska Ventorini; Neves, Frederico Sampaio; Moraes, Livia Almeida Bueno; Freitas, Deborah Queiroz, E-mail: tataventorini@hotmail.com [Universidade Estadual de Campinas (UNICAMP), Piracicaba, SP (Brazil). Faculdade de Odontologia

2015-03-01

This article aimed at comparing the accuracy of linear measurement tools of different commercial software packages. Eight fully edentulous dry mandibles were selected for this study. Incisor, canine, premolar, first molar and second molar regions were selected. Cone beam computed tomography (CBCT) images were obtained with i-CAT Next Generation. Linear bone measurements were performed by one observer on the cross-sectional images using three different software packages: XoranCat®, OnDemand3D® and KDIS3D®, all able to assess DICOM images. In addition, 25% of the sample was reevaluated for the purpose of reproducibility. The mandibles were sectioned to obtain the gold standard for each region. Intraclass coefficients (ICC) were calculated to examine the agreement between the two periods of evaluation; the one-way analysis of variance performed with the post-hoc Dunnett test was used to compare each of the software-derived measurements with the gold standard. The ICC values were excellent for all software packages. The least difference between the software-derived measurements and the gold standard was obtained with the OnDemand3D and KDIS3D (‑0.11 and ‑0.14 mm, respectively), and the greatest, with the XoranCAT (+0.25 mm). However, there was no statistical significant difference between the measurements obtained with the different software packages and the gold standard (p > 0.05). In conclusion, linear bone measurements were not influenced by the software package used to reconstruct the image from CBCT DICOM data. (author)

Improving package structure of object-oriented software using multi-objective optimization and weighted class connections

Directory of Open Access Journals (Sweden)

Amarjeet

2017-07-01

Full Text Available The software maintenance activities performed without following the original design decisions about the package structure usually deteriorate the quality of software modularization, leading to decay of the quality of the system. One of the main reasons for such structural deterioration is inappropriate grouping of source code classes in software packages. To improve such grouping/modular-structure, previous researchers formulated the software remodularization problem as an optimization problem and solved it using search-based meta-heuristic techniques. These optimization approaches aimed at improving the quality metrics values of the structure without considering the original package design decisions, often resulting into a totally new software modularization. The entirely changed software modularization becomes costly to realize as well as difficult to understand for the developers/maintainers. To alleviate this issue, we propose a multi-objective optimization approach to improve the modularization quality of an object-oriented system with minimum possible movement of classes between existing packages of original software modularization. The optimization is performed using NSGA-II, a widely-accepted multi-objective evolutionary algorithm. In order to ensure minimum modification of original package structure, a new approach of computing class relations using weighted strengths has been proposed here. The weights of relations among different classes are computed on the basis of the original package structure. A new objective function has been formulated using these weighted class relations. This objective function drives the optimization process toward better modularization quality simultaneously ensuring preservation of original structure. To evaluate the results of the proposed approach, a series of experiments are conducted over four real-worlds and two random software applications. The experimental results clearly indicate the effectiveness

Software packages for food engineering needs

OpenAIRE

Abakarov, Alik

2011-01-01

The graphic user interface (GUI) software packages “ANNEKs” and “OPT-PROx” are developed to meet food engineering needs. “OPT-RROx” (OPTimal PROfile) is software developed to carry out thermal food processing optimization based on the variable retort temperature processing and global optimization technique. “ANNEKs” (Artificial Neural Network Enzyme Kinetics) is software designed for determining the kinetics of enzyme hydrolysis of protein at different initial reaction parameters based on the...

Intercomparison of gamma ray analysis software packages

International Nuclear Information System (INIS)

1998-04-01

The IAEA undertook an intercomparison exercise to review available software for gamma ray spectra analysis. This document describes the methods used in the intercomparison exercise, characterizes the software packages reviewed and presents the results obtained. Only direct results are given without any recommendation for a particular software or method for gamma ray spectra analysis

Quantitative comparison and evaluation of two commercially available, two-dimensional electrophoresis image analysis software packages, Z3 and Melanie.

Science.gov (United States)

Raman, Babu; Cheung, Agnes; Marten, Mark R

2002-07-01

While a variety of software packages are available for analyzing two-dimensional electrophoresis (2-DE) gel images, no comparisons between these packages have been published, making it difficult for end users to determine which package would best meet their needs. The goal here was to develop a set of tests to quantitatively evaluate and then compare two software packages, Melanie 3.0 and Z3, in three of the fundamental steps involved in 2-DE image analysis: (i) spot detection, (ii) gel matching, and (iii) spot quantitation. To test spot detection capability, automatically detected protein spots were compared to manually counted, "real" protein spots. Spot matching efficiency was determined by comparing distorted (both geometrically and nongeometrically) gel images with undistorted original images, and quantitation tests were performed on artificial gels with spots of varying Gaussian volumes. In spot detection tests, Z3 performed better than Melanie 3.0 and required minimal user intervention to detect approximately 89% of the actual protein spots and relatively few extraneous spots. Results from gel matching tests depended on the type of image distortion used. For geometric distortions, Z3 performed better than Melanie 3.0, matching 99% of the spots, even for extreme distortions. For nongeometrical distortions, both Z3 and Melanie 3.0 required user intervention and performed comparably, matching 95% of the spots. In spot quantitation tests, both Z3 and Melanie 3.0 predicted spot volumes relatively well for spot ratios less than 1:6. For higher ratios, Melanie 3.0 did much better. In summary, results suggest Z3 requires less user intervention than Melanie 3.0, thus simplifying differential comparison of 2-DE gel images. Melanie 3.0, however, offers many more optional tools for image editing, spot detection, data reporting and statistical analysis than Z3. All image files used for these tests and updated information on the software are available on the internet

Accuracy of Giovanni and Marksim Software Packages for ...

African Journals Online (AJOL)

Accuracy of Giovanni and Marksim Software Packages for Generating Daily Rainfall Data in ... using Giovanni software over Marksim, for areas receiving bimodal rainfall regimes similar to ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

ORNL's DCAL software package

International Nuclear Information System (INIS)

Eckerman, K.F.

2007-01-01

Oak Ridge National Laboratory has released its Dose and Risk Calculation software, DCAL. DCAL, developed with the support of the U.S. Environmental Protection Agency, consists of a series of computational modules, driven in either an interactive or a batch mode for computation of dose and risk coefficients from intakes of radionuclides or exposure to radionuclides in environmental media. The software package includes extensive libraries of biokinetic and dosimetric data that represent the current state of the art. The software has unique capability for addressing intakes of radionuclides by non-adults. DCAL runs as 32-bit extended DOS and console applications under Windows 98/NT/2000/XP. It is intended for users familiar with the basic elements of computational radiation dosimetry. Components of DCAL have been used to prepare U.S. Environmental Protection Agency's Federal Guidance Reports 12 and 13 and several publications of the International Commission on Radiological Protection. (author)

A software package for biomedical image processing and analysis

International Nuclear Information System (INIS)

Goncalves, J.G.M.; Mealha, O.

1988-01-01

The decreasing cost of computing power and the introduction of low cost imaging boards justifies the increasing number of applications of digital image processing techniques in the area of biomedicine. There is however a large software gap to be fulfilled, between the application and the equipment. The requirements to bridge this gap are twofold: good knowledge of the hardware provided and its interface to the host computer, and expertise in digital image processing and analysis techniques. A software package incorporating these two requirements was developed using the C programming language, in order to create a user friendly image processing programming environment. The software package can be considered in two different ways: as a data structure adapted to image processing and analysis, which acts as the backbone and the standard of communication for all the software; and as a set of routines implementing the basic algorithms used in image processing and analysis. Hardware dependency is restricted to a single module upon which all hardware calls are based. The data structure that was built has four main features: hierchical, open, object oriented, and object dependent dimensions. Considering the vast amount of memory needed by imaging applications and the memory available in small imaging systems, an effective image memory management scheme was implemented. This software package is being used for more than one and a half years by users with different applications. It proved to be an excellent tool for helping people to get adapted into the system, and for standardizing and exchanging software, yet preserving flexibility allowing for users' specific implementations. The philosophy of the software package is discussed and the data structure that was built is described in detail

Adoption of open source digital library software packages: a survey

OpenAIRE

Jose, Sanjo

2007-01-01

Open source digital library packages are gaining popularity nowadays. To build a digital library under economical conditions open source software is preferable. This paper tries to identify the extent of adoption of open source digital library software packages in various organizations through an online survey. It lays down the findings from the survey.

Chinshan living PRA model using NUPRA software package

International Nuclear Information System (INIS)

Cheng, S.-K.; Lin, T.-J.

2004-01-01

A living probabilistic risk assessment (PRA) model has been established for Chinshan Nuclear Power Station (BWR-4, MARK-I) using NUPRA software package. The core damage frequency due to internal events, seismic events and typhoons are evaluated in this model. The methodology and results considering the recent implementation of the 5th emergency diesel generator and automatic boron injection function are presented. The dominant sequences of this PRA model are discussed, and some possible applications of this living model are proposed. (author)

Human-machine interface software package

International Nuclear Information System (INIS)

Liu, D.K.; Zhang, C.Z.

1992-01-01

The Man-Machine Interface software Package (MMISP) is designed to configure the console software of PLS 60 Mev LINAC control system. The control system of PLS 60 Mev LINAC is a distributed control system which includes the main computer (Intel 310) four local station, and two sets of industrial level console computer. The MMISP provides the operator with the display page editor, various I/O configuration such as digital signals In/Out, analog signal In/Out, waveform TV graphic display, and interactive with operator through graphic picture display, voice explanation, and touch panel. This paper describes its function and application. (author)

Risk Analysis and Decision-Making Software Package (1997 Version) User Manual

Energy Technology Data Exchange (ETDEWEB)

Chung, F.T.H.

1999-02-11

This manual provides instructions for using the U.S. Department of Energy's (DOE) risk analysis and decision making software (1997 version) developed at BDM Petroleum Technologies by BDM-Oklahoma, Inc. for DOE, under contract No. DE-AC22-94PC91OO8. This software provides petroleum producers with a simple, handy tool for exploration and production risk analysis and decision-making. It collects useful risk analysis tools in one package so that users do not have to use several programs separately. The software is simple to use, but still provides many functions. The 1997 version of the software package includes the following tools: (1) Investment risk (Gambler's ruin) analysis; (2) Monte Carlo simulation; (3) Best fit for distribution functions; (4) Sample and rank correlation; (5) Enhanced oil recovery method screening; and (6) artificial neural network. This software package is subject to change. Suggestions and comments from users are welcome and will be considered for future modifications and enhancements of the software. Please check the opening screen of the software for the current contact information. In the future, more tools will be added to this software package. This manual includes instructions on how to use the software but does not attempt to fully explain the theory and algorithms used to create it.

Software Package STATISTICA and Educational Process

Directory of Open Access Journals (Sweden)

Demidova Liliya

2016-01-01

Full Text Available The paper describes the main aspects of application of the software package STATISTICA in the educational process. Technologies of data mining which can be useful for students researches have been considered. The main tools of these technologies have been discussed.

International Inventory of Software Packages in the Information Field.

Science.gov (United States)

Keren, Carl, Ed.; Sered, Irina, Ed.

Designed to provide guidance in selecting appropriate software for library automation, information storage and retrieval, or management of bibliographic databases, this inventory describes 188 computer software packages. The information was obtained through a questionnaire survey of 600 software suppliers and developers who were asked to describe…

Evaluation of a software package for automated quality assessment of contrast detail images-comparison with subjective visual assessment

International Nuclear Information System (INIS)

Pascoal, A; Lawinski, C P; Honey, I; Blake, P

2005-01-01

Contrast detail analysis is commonly used to assess image quality (IQ) associated with diagnostic imaging systems. Applications include routine assessment of equipment performance and optimization studies. Most frequently, the evaluation of contrast detail images involves human observers visually detecting the threshold contrast detail combinations in the image. However, the subjective nature of human perception and the variations in the decision threshold pose limits to the minimum image quality variations detectable with reliability. Objective methods of assessment of image quality such as automated scoring have the potential to overcome the above limitations. A software package (CDRAD analyser) developed for automated scoring of images produced with the CDRAD test object was evaluated. Its performance to assess absolute and relative IQ was compared with that of an average observer. Results show that the software does not mimic the absolute performance of the average observer. The software proved more sensitive and was able to detect smaller low-contrast variations. The observer's performance was superior to the software's in the detection of smaller details. Both scoring methods showed frequent agreement in the detection of image quality variations resulting from changes in kVp and KERMA detector , which indicates the potential to use the software CDRAD analyser for assessment of relative IQ

Global review of open access risk assessment software packages valid for global or continental scale analysis

Science.gov (United States)

Daniell, James; Simpson, Alanna; Gunasekara, Rashmin; Baca, Abigail; Schaefer, Andreas; Ishizawa, Oscar; Murnane, Rick; Tijssen, Annegien; Deparday, Vivien; Forni, Marc; Himmelfarb, Anne; Leder, Jan

2015-04-01

Over the past few decades, a plethora of open access software packages for the calculation of earthquake, volcanic, tsunami, storm surge, wind and flood have been produced globally. As part of the World Bank GFDRR Review released at the Understanding Risk 2014 Conference, over 80 such open access risk assessment software packages were examined. Commercial software was not considered in the evaluation. A preliminary analysis was used to determine whether the 80 models were currently supported and if they were open access. This process was used to select a subset of 31 models that include 8 earthquake models, 4 cyclone models, 11 flood models, and 8 storm surge/tsunami models for more detailed analysis. By using multi-criteria analysis (MCDA) and simple descriptions of the software uses, the review allows users to select a few relevant software packages for their own testing and development. The detailed analysis evaluated the models on the basis of over 100 criteria and provides a synopsis of available open access natural hazard risk modelling tools. In addition, volcano software packages have since been added making the compendium of risk software tools in excess of 100. There has been a huge increase in the quality and availability of open access/source software over the past few years. For example, private entities such as Deltares now have an open source policy regarding some flood models (NGHS). In addition, leaders in developing risk models in the public sector, such as Geoscience Australia (EQRM, TCRM, TsuDAT, AnuGA) or CAPRA (ERN-Flood, Hurricane, CRISIS2007 etc.), are launching and/or helping many other initiatives. As we achieve greater interoperability between modelling tools, we will also achieve a future wherein different open source and open access modelling tools will be increasingly connected and adapted towards unified multi-risk model platforms and highly customised solutions. It was seen that many software tools could be improved by enabling user

An Ada Linear-Algebra Software Package Modeled After HAL/S

Science.gov (United States)

Klumpp, Allan R.; Lawson, Charles L.

1990-01-01

New avionics software written more easily. Software package extends Ada programming language to include linear-algebra capabilities similar to those of HAL/S programming language. Designed for such avionics applications as Space Station flight software. In addition to built-in functions of HAL/S, package incorporates quaternion functions used in Space Shuttle and Galileo projects and routines from LINPAK solving systems of equations involving general square matrices. Contains two generic programs: one for floating-point computations and one for integer computations. Written on IBM/AT personal computer running under PC DOS, v.3.1.

Western aeronautical test range real-time graphics software package MAGIC

Science.gov (United States)

Malone, Jacqueline C.; Moore, Archie L.

1988-01-01

The master graphics interactive console (MAGIC) software package used on the Western Aeronautical Test Range (WATR) of the NASA Ames Research Center is described. MAGIC is a resident real-time research tool available to flight researchers-scientists in the NASA mission control centers of the WATR at the Dryden Flight Research Facility at Edwards, California. The hardware configuration and capabilities of the real-time software package are also discussed.

Software and package applicating for network meta-analysis: A usage-based comparative study.

Science.gov (United States)

Xu, Chang; Niu, Yuming; Wu, Junyi; Gu, Huiyun; Zhang, Chao

2017-12-21

To compare and analyze the characteristics and functions of software applications for network meta-analysis (NMA). PubMed, EMbase, The Cochrane Library, the official websites of Bayesian inference Using Gibbs Sampling (BUGS), Stata and R, and Google were searched to collect the software and packages for performing NMA; software and packages published up to March 2016 were included. After collecting the software, packages, and their user guides, we used the software and packages to calculate a typical example. All characteristics, functions, and computed results were compared and analyzed. Ten types of software were included, including programming and non-programming software. They were developed mainly based on Bayesian or frequentist theory. Most types of software have the characteristics of easy operation, easy mastery, exact calculation, or excellent graphing. However, there was no single software that performed accurate calculations with superior graphing; this could only be achieved through the combination of two or more types of software. This study suggests that the user should choose the appropriate software according to personal programming basis, operational habits, and financial ability. Then, the choice of the combination of BUGS and R (or Stata) software to perform the NMA is considered. © 2017 Chinese Cochrane Center, West China Hospital of Sichuan University and John Wiley & Sons Australia, Ltd.

Software package for analysis of completely randomized block design

African Journals Online (AJOL)

This study is to design and develop statistical software (package), OYSP1.0 which conveniently accommodates and analyzes large mass of data emanating from experimental designs, in particular, completely Randomized Block design. Visual Basic programming is used in the design. The statistical package OYSP 1.0 ...

Automation of Military Civil Engineering and Site Design Functions: Software Evaluation

Science.gov (United States)

1989-09-01

AutoCad , in-house application programs written in AutoCad command language, AutoLISP , and BASIC Would like to obtain: Surveying, earthwork, utilities...Experiment Station (WES) Corps library programs, no one software is being used more than another. For drafting, AutoCAD has been the most commonly...ware packages evaluated. D.C.A. Engineering Software D.C.A. software is used to enhance the AutoCAD drafting package and operates solely within the

SPADE - software package to aid diffraction experiments

International Nuclear Information System (INIS)

Farren, J.; Giltrap, J.W.

1978-10-01

A software package is described which enables the DEC PDP-11/03 microcomputer to execute several different X-ray diffraction experiments and other similar experiments where stepper motors are driven and data is gathered and processed in real time. (author)

IDES: Interactive Data Entry System: a generalized data acquisition software package

International Nuclear Information System (INIS)

Gasser, S.B.

1980-04-01

The Interactive Data Entry System (IDES) is a software package which greatly assists in designing and storing forms to be used for the directed acquisition of data. Objective of this package is to provide a viable man/machine interface to any comprehensive data base. This report provides a technical description of the software and can be used as a user's manual

Closing the loop on improvement: Packaging experience in the Software Engineering Laboratory

Science.gov (United States)

Waligora, Sharon R.; Landis, Linda C.; Doland, Jerry T.

1994-01-01

As part of its award-winning software process improvement program, the Software Engineering Laboratory (SEL) has developed an effective method for packaging organizational best practices based on real project experience into useful handbooks and training courses. This paper shares the SEL's experience over the past 12 years creating and updating software process handbooks and training courses. It provides cost models and guidelines for successful experience packaging derived from SEL experience.

Evaluation of Agricultural Accounting Software. Improved Decision Making. Third Edition.

Science.gov (United States)

Lovell, Ashley C., Comp.

Following a discussion of the evaluation criteria for choosing accounting software, this guide contains reviews of 27 accounting software programs that could be used by farm or ranch business managers. The information in the reviews was provided by the software vendors and covers the following points for each software package: general features,…

Comparison of four software packages applied to a scattering problem

DEFF Research Database (Denmark)

Albertsen, Niels Christian; Chesneaux, Jean-Marie; Christiansen, Søren

1999-01-01

We investigate characteristic features of four different software packages by applying them to the numerical solution of a non-trivial physical problem in computer simulation, viz., scattering of waves from a sinusoidal boundary. The numerical method used is based on boundary collocation. This le......We investigate characteristic features of four different software packages by applying them to the numerical solution of a non-trivial physical problem in computer simulation, viz., scattering of waves from a sinusoidal boundary. The numerical method used is based on boundary collocation...

Comparative evaluations of the Monte Carlo-based light propagation simulation packages for optical imaging

Directory of Open Access Journals (Sweden)

Lin Wang

2018-01-01

Full Text Available Monte Carlo simulation of light propagation in turbid medium has been studied for years. A number of software packages have been developed to handle with such issue. However, it is hard to compare these simulation packages, especially for tissues with complex heterogeneous structures. Here, we first designed a group of mesh datasets generated by Iso2Mesh software, and used them to cross-validate the accuracy and to evaluate the performance of four Monte Carlo-based simulation packages, including Monte Carlo model of steady-state light transport in multi-layered tissues (MCML, tetrahedron-based inhomogeneous Monte Carlo optical simulator (TIMOS, Molecular Optical Simulation Environment (MOSE, and Mesh-based Monte Carlo (MMC. The performance of each package was evaluated based on the designed mesh datasets. The merits and demerits of each package were also discussed. Comparative results showed that the TIMOS package provided the best performance, which proved to be a reliable, efficient, and stable MC simulation package for users.

Consys Linear Control System Design Software Package

International Nuclear Information System (INIS)

Diamantidis, Z.

1987-01-01

This package is created in order to help engineers, researchers, students and all who work on linear control systems. The software includes all time and frequency domain analysises, spectral analysises and networks, active filters and regulators design aids. The programmes are written on Hewlett Packard computer in Basic 4.0

A User-Friendly Software Package for HIFU Simulation

Science.gov (United States)

Soneson, Joshua E.

2009-04-01

A freely-distributed, MATLAB (The Mathworks, Inc., Natick, MA)-based software package for simulating axisymmetric high-intensity focused ultrasound (HIFU) beams and their heating effects is discussed. The package (HIFU_Simulator) consists of a propagation module which solves the Khokhlov-Zabolotskaya-Kuznetsov (KZK) equation and a heating module which solves Pennes' bioheat transfer (BHT) equation. The pressure, intensity, heating rate, temperature, and thermal dose fields are computed, plotted, the output is released to the MATLAB workspace for further user analysis or postprocessing.

Article I. Multi-platform Automated Software Building and Packaging

International Nuclear Information System (INIS)

Rodriguez, A Abad; Gomes Gouveia, V E; Meneses, D; Capannini, F; Aimar, A; Di Meglio, A

2012-01-01

One of the major goals of the EMI (European Middleware Initiative) project is the integration of several components of the pre-existing middleware (ARC, gLite, UNICORE and dCache) into a single consistent set of packages with uniform distributions and repositories. Those individual middleware projects have been developed in the last decade by tens of development teams and before EMI were all built and tested using different tools and dedicated services. The software, millions of lines of code, is written in several programming languages and supports multiple platforms. Therefore a viable solution ought to be able to build and test applications on multiple programming languages using common dependencies on all selected platforms. It should, in addition, package the resulting software in formats compatible with the popular Linux distributions, such as Fedora and Debian, and store them in repositories from which all EMI software can be accessed and installed in a uniform way. Despite this highly heterogeneous initial situation, a single common solution, with the aim of quickly automating the integration of the middleware products, had to be selected and implemented in a few months after the beginning of the EMI project. Because of the previous knowledge and the short time available in which to provide this common solution, the ETICS service, where the gLite middleware was already built for years, was selected. This contribution describes how the team in charge of providing a common EMI build and packaging infrastructure to the whole project has developed a homogeneous solution for releasing and packaging the EMI components from the initial set of tools used by the earlier middleware projects. An important element of the presentation is the developers experience and feedback on converging on ETICS and on the on-going work in order to finally add more widely used and supported build and packaging solutions of the Linux platforms

Development of 'Enhance reconstruction package' software for whole-body PET

International Nuclear Information System (INIS)

Mizuta, Tetsuro; Imanishi, Tatsuru; Ishikawa, Akihiro

2011-01-01

We have developed 'Enhance Reconstruction Package' Software for our whole-body positron emission tomography (PET) Eminence series. This package improves image quality and streamlines the workflow in clinical PET and PET/CT studies. The present paper describes an outline of the applications for data collection, normalization, etc. and also reports some PET images obtained by the software. The signal to noise ratio was optimized in the phantom study, leading to the improvement in image quality. The real time display tool and the remote control tool would make a contribution to enhancement in operability in the routine workflow. (author)

COMPUTATIONAL MODELLING OF BUFFETING EFFECTS USING OPENFOAM SOFTWARE PACKAGE

Directory of Open Access Journals (Sweden)

V. T. Kalugin

2015-01-01

Full Text Available In this paper, the preliminary results of computational modeling of an aircraft with the airbrake deployed are presented. The calculations were performed with OpenFOAM software package. The results outlined are a part of a research project to optimise aircraft performance using a perforated airbrake. Within this stage of the project OpenFOAM software package with hybrid RANS-LES approach was tested in respect to a given configuration of the aircraft, airbrake and then has been compared with the test data. For the worst case the amplitude of the peak force acting on the tail fin can be up to 6 times higher than the average value without airbrake deployed. To reduce unsteady loads acting on the tailfin, perforation of the airbrake was proposed.

Is liver perfusion CT reproducible? A study on intra- and interobserver agreement of normal hepatic haemodynamic parameters obtained with two different software packages.

Science.gov (United States)

Bretas, Elisa Almeida Sathler; Torres, Ulysses S; Torres, Lucas Rios; Bekhor, Daniel; Saito Filho, Celso Fernando; Racy, Douglas Jorge; Faggioni, Lorenzo; D'Ippolito, Giuseppe

2017-10-01

To evaluate the agreement between the measurements of perfusion CT parameters in normal livers by using two different software packages. This retrospective study was based on 78 liver perfusion CT examinations acquired for detecting suspected liver metastasis. Patients with any morphological or functional hepatic abnormalities were excluded. The final analysis included 37 patients (59.7 ± 14.9 y). Two readers (1 and 2) independently measured perfusion parameters using different software packages from two major manufacturers (A and B). Arterial perfusion (AP) and portal perfusion (PP) were determined using the dual-input vascular one-compartmental model. Inter-reader agreement for each package and intrareader agreement between both packages were assessed with intraclass correlation coefficients (ICC) and Bland-Altman statistics. Inter-reader agreement was substantial for AP using software A (ICC = 0.82) and B (ICC = 0.85-0.86), fair for PP using software A (ICC = 0.44) and fair to moderate for PP using software B (ICC = 0.56-0.77). Intrareader agreement between software A and B ranged from slight to moderate (ICC = 0.32-0.62) for readers 1 and 2 considering the AP parameters, and from fair to moderate (ICC = 0.40-0.69) for readers 1 and 2 considering the PP parameters. At best there was only moderate agreement between both software packages, resulting in some uncertainty and suboptimal reproducibility. Advances in knowledge: Software-dependent factors may contribute to variance in perfusion measurements, demanding further technical improvements. AP measurements seem to be the most reproducible parameter to be adopted when evaluating liver perfusion CT.

PINT, A Modern Software Package for Pulsar Timing

Science.gov (United States)

Luo, Jing; Ransom, Scott M.; Demorest, Paul; Ray, Paul S.; Stovall, Kevin; Jenet, Fredrick; Ellis, Justin; van Haasteren, Rutger; Bachetti, Matteo; NANOGrav PINT developer team

2018-01-01

Pulsar timing, first developed decades ago, has provided an extremely wide range of knowledge about our universe. It has been responsible for many important discoveries, such as the discovery of the first exoplanet and the orbital period decay of double neutron star systems. Currently pulsar timing is the leading technique for detecting low frequency (about 10^-9 Hertz) gravitational waves (GW) using an array of pulsars as the detectors. To achieve this goal, high precision pulsar timing data, at about nanoseconds level, is required. Most high precision pulsar timing data are analyzed using the widely adopted software TEMPO/TEMPO2. But for a robust and believable GW detection, it is important to have independent software that can cross-check the result. In this poster we present the new generation pulsar timing software PINT. This package will provide a robust system to cross check high-precision timing results, completely independent of TEMPO and TEMPO2. In addition, PINT is designed to be a package that is easy to extend and modify, through use of flexible code architecture and a modern programming language, Python, with modern technology and libraries.

Maximize Your Investment 10 Key Strategies for Effective Packaged Software Implementations

CERN Document Server

Beaubouef, Grady Brett

2009-01-01

This is a handbook covering ten principles for packaged software implementations that project managers, business owners, and IT developers should pay attention to. The book also has practical real-world coverage including a sample agenda for conducting business solution modeling, customer case studies, and a road map to implement guiding principles. This book is aimed at enterprise architects, development leads, project managers, business systems analysts, business systems owners, and anyone who wants to implement packaged software effectively. If you are a customer looking to implement COTS s

Development of a software package for solid-angle calculations using the Monte Carlo method

International Nuclear Information System (INIS)

Zhang, Jie; Chen, Xiulian; Zhang, Changsheng; Li, Gang; Xu, Jiayun; Sun, Guangai

2014-01-01

Solid-angle calculations play an important role in the absolute calibration of radioactivity measurement systems and in the determination of the activity of radioactive sources, which are often complicated. In the present paper, a software package is developed to provide a convenient tool for solid-angle calculations in nuclear physics. The proposed software calculates solid angles using the Monte Carlo method, in which a new type of variance reduction technique was integrated. The package, developed under the environment of Microsoft Foundation Classes (MFC) in Microsoft Visual C ++ , has a graphical user interface, in which, the visualization function is integrated in conjunction with OpenGL. One advantage of the proposed software package is that it can calculate the solid angle subtended by a detector with different geometric shapes (e.g., cylinder, square prism, regular triangular prism or regular hexagonal prism) to a point, circular or cylindrical source without any difficulty. The results obtained from the proposed software package were compared with those obtained from previous studies and calculated using Geant4. It shows that the proposed software package can produce accurate solid-angle values with a greater computation speed than Geant4. -- Highlights: • This software package (SAC) can give accurate solid-angle values. • SAC calculate solid angles using the Monte Carlo method and it has higher computation speed than Geant4. • A simple but effective variance reduction technique which was put forward by the authors has been applied in SAC. • A visualization function and a graphical user interface are also integrated in SAC

Comparison of four software packages for CT lung volumetry in healthy individuals

Energy Technology Data Exchange (ETDEWEB)

Nemec, Stefan F. [Harvard Medical School, Department of Radiology, Beth Israel Deaconess Medical Center, Boston, MA (United States); Medical University of Vienna, Department of Biomedical Imaging and Image-guided Therapy, Vienna (Austria); Molinari, Francesco [Centre Hospitalier Regional Universitaire de Lille, Department of Radiology, Lille (France); Dufresne, Valerie [CHU de Charleroi - Hopital Vesale, Pneumologie, Montigny-le-Tilleul (Belgium); Gosset, Natacha [CHU Tivoli, Service d' Imagerie Medicale, La Louviere (Belgium); Silva, Mario; Bankier, Alexander A. [Harvard Medical School, Department of Radiology, Beth Israel Deaconess Medical Center, Boston, MA (United States)

2015-06-01

To compare CT lung volumetry (CTLV) measurements provided by different software packages, and to provide normative data for lung densitometric measurements in healthy individuals. This retrospective study included 51 chest CTs of 17 volunteers (eight men and nine women; mean age, 30 ± 6 years), who underwent spirometrically monitored CT at total lung capacity (TLC), functional residual capacity (FRC), and mean inspiratory capacity (MIC). Volumetric differences assessed by four commercial software packages were compared with analysis of variance (ANOVA) for repeated measurements and benchmarked against the threshold for acceptable variability between spirometric measurements. Mean lung density (MLD) and parenchymal heterogeneity (MLD-SD) were also compared with ANOVA. Volumetric differences ranged from 12 to 213 ml (0.20 % to 6.45 %). Although 16/18 comparisons (among four software packages at TLC, MIC, and FRC) were statistically significant (P < 0.001 to P = 0.004), only 3/18 comparisons, one at MIC and two at FRC, exceeded the spirometry variability threshold. MLD and MLD-SD significantly increased with decreasing volumes, and were significantly larger in lower compared to upper lobes (P < 0.001). Lung volumetric differences provided by different software packages are small. These differences should not be interpreted based on statistical significance alone, but together with absolute volumetric differences. (orig.)

Software package for modeling spin-orbit motion in storage rings

Science.gov (United States)

Zyuzin, D. V.

2015-12-01

A software package providing a graphical user interface for computer experiments on the motion of charged particle beams in accelerators, as well as analysis of obtained data, is presented. The software package was tested in the framework of the international project on electric dipole moment measurement JEDI (Jülich Electric Dipole moment Investigations). The specific features of particle spin motion imply the requirement to use a cyclic accelerator (storage ring) consisting of electrostatic elements, which makes it possible to preserve horizontal polarization for a long time. Computer experiments study the dynamics of 106-109 particles in a beam during 109 turns in an accelerator (about 1012-1015 integration steps for the equations of motion). For designing an optimal accelerator structure, a large number of computer experiments on polarized beam dynamics are required. The numerical core of the package is COSY Infinity, a program for modeling spin-orbit dynamics.

Description of the IV + V System Software Package.

Science.gov (United States)

Microcomputers for Information Management: An International Journal for Library and Information Services, 1984

1984-01-01

Describes the IV + V System, a software package designed by the Institut fur Maschinelle Dokumentation for the United Nations General Information Programme and UNISIST to support automation of local information and documentation services. Principle program features and functions outlined include input/output, databank, text image, output, and…

METEOR v1.0 - Design and structure of the software package

International Nuclear Information System (INIS)

Palomo, E.

1994-01-01

This script describes the structure and the separated modules of the software package METEOR for the statistical analysis of meteorological data series. It contains a systematic description of the subroutines of METEOR and, also, of the required shape for input and output files. The original version of METEOR have been developed by Ph.D. Elena Palomo, CIEMAT-IER, GIMASE. It is built by linking programs and routines written in FORTRAN 77 and it adds thc graphical capabilities of GNUPLOT. The shape of this toolbox was designed following the criteria of modularity, flexibility and agility criteria. All the input, output and analysis options are structured in three main menus: i) the first is aimed to evaluate the quality of the data set; ii) the second is aimed for pre-processing of the data; and iii) the third is aimed towards the statistical analyses and for creating the graphical outputs. Actually the information about METEOR is constituted by three documents written in spanish: 1) METEOR v1.0: User's guide; 2) METEOR v1.0: A usage example; 3) METEOR v 1.0: Design and structure of the software package. (Author)

Software Package for Optics Measurement and Correction in the LHC

CERN Document Server

Aiba, M; Tomas, R; Vanbavinckhove, G

2010-01-01

A software package has been developed for the LHC on-line optics measurement and correction. This package includes several different algorithms to measure phase advance, beta functions, dispersion, coupling parameters and even some non-linear terms. A Graphical User Interface provides visualization tools to compare measurements to model predictions, fit analytical formula, localize error sources and compute and send corrections to the hardware.

An Assessment of the Library Application Software Packages in ...

African Journals Online (AJOL)

Journal Home > Vol 7, No 2 (2007) > ... the study examined the adopted softwares' security, compatibility/capabilities, ... The study found that most application packages available in the Nigerian automation market place are effective since they ...

Perprof-py: A Python Package for Performance Profile of Mathematical Optimization Software

Directory of Open Access Journals (Sweden)

Abel Soares Siqueira

2016-04-01

Full Text Available A very important area of research in the field of Mathematical Optimization is the benchmarking of optimization packages to compare solvers. During benchmarking, one usually collects a large amount of information like CPU time, number of functions evaluations, number of iterations, and much more. This information, if presented as tables, can be difficult to analyze and compare due to large amount of data. Therefore tools to better process and understand optimization benchmark data have been developed. One of the most widespread tools is the Performance Profile graphics proposed by Dolan and Moré [2]. In this context, this paper describes perprof-py, a free/open source software that creates 'Performance Profile' graphics. This software produces graphics in PDF using LaTeX with PGF/TikZ [22] and PGFPLOTS [4] packages, in PNG using matplotlib [9], and in HTML using Bokeh [1]. Perprof-py can also be easily extended to be used with other plot libraries. It is implemented in Python 3 with support for internationalization, and is under the General Public License Version 3 (GPLv3.

The experimental modification of a computer software package for ...

African Journals Online (AJOL)

The experimental modification of a computer software package for graphing algebraic functions. ... No Abstract Available South African Journal of Education Vol.25(2) 2005: 61-68. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Software package for modeling spin–orbit motion in storage rings

Energy Technology Data Exchange (ETDEWEB)

Zyuzin, D. V., E-mail: d.zyuzin@fz-juelich.de [St. Petersburg State University (Russian Federation)

2015-12-15

A software package providing a graphical user interface for computer experiments on the motion of charged particle beams in accelerators, as well as analysis of obtained data, is presented. The software package was tested in the framework of the international project on electric dipole moment measurement JEDI (Jülich Electric Dipole moment Investigations). The specific features of particle spin motion imply the requirement to use a cyclic accelerator (storage ring) consisting of electrostatic elements, which makes it possible to preserve horizontal polarization for a long time. Computer experiments study the dynamics of 10{sup 6}–10{sup 9} particles in a beam during 10{sup 9} turns in an accelerator (about 10{sup 12}–10{sup 15} integration steps for the equations of motion). For designing an optimal accelerator structure, a large number of computer experiments on polarized beam dynamics are required. The numerical core of the package is COSY Infinity, a program for modeling spin–orbit dynamics.

gr-MRI: A software package for magnetic resonance imaging using software defined radios

Science.gov (United States)

Hasselwander, Christopher J.; Cao, Zhipeng; Grissom, William A.

2016-09-01

The goal of this work is to develop software that enables the rapid implementation of custom MRI spectrometers using commercially-available software defined radios (SDRs). The developed gr-MRI software package comprises a set of Python scripts, flowgraphs, and signal generation and recording blocks for GNU Radio, an open-source SDR software package that is widely used in communications research. gr-MRI implements basic event sequencing functionality, and tools for system calibrations, multi-radio synchronization, and MR signal processing and image reconstruction. It includes four pulse sequences: a single-pulse sequence to record free induction signals, a gradient-recalled echo imaging sequence, a spin echo imaging sequence, and an inversion recovery spin echo imaging sequence. The sequences were used to perform phantom imaging scans with a 0.5 Tesla tabletop MRI scanner and two commercially-available SDRs. One SDR was used for RF excitation and reception, and the other for gradient pulse generation. The total SDR hardware cost was approximately 2000. The frequency of radio desynchronization events and the frequency with which the software recovered from those events was also measured, and the SDR's ability to generate frequency-swept RF waveforms was validated and compared to the scanner's commercial spectrometer. The spin echo images geometrically matched those acquired using the commercial spectrometer, with no unexpected distortions. Desynchronization events were more likely to occur at the very beginning of an imaging scan, but were nearly eliminated if the user invoked the sequence for a short period before beginning data recording. The SDR produced a 500 kHz bandwidth frequency-swept pulse with high fidelity, while the commercial spectrometer produced a waveform with large frequency spike errors. In conclusion, the developed gr-MRI software can be used to develop high-fidelity, low-cost custom MRI spectrometers using commercially-available SDRs.

Graphical representation of ribosomal RNA probe accessibility data using ARB software package

Directory of Open Access Journals (Sweden)

Amann Rudolf

2005-03-01

Full Text Available Abstract Background Taxon specific hybridization probes in combination with a variety of commonly used hybridization formats nowadays are standard tools in microbial identification. A frequently applied technology, fluorescence in situ hybridization (FISH, besides single cell identification, allows the localization and functional studies of the microbial community composition. Careful in silico design and evaluation of potential oligonucleotide probe targets is therefore crucial for performing successful hybridization experiments. Results The PROBE Design tools of the ARB software package take into consideration several criteria such as number, position and quality of diagnostic sequence differences while designing oligonucleotide probes. Additionally, new visualization tools were developed to enable the user to easily examine further sequence associated criteria such as higher order structure, conservation, G+C content, transition-transversion profiles and in situ target accessibility patterns. The different types of sequence associated information (SAI can be visualized by user defined background colors within the ARB primary and secondary structure editors as well as in the PROBE Match tool. Conclusion Using this tool, in silico probe design and evaluation can be performed with respect to in situ probe accessibility data. The evaluation of proposed probe targets with respect to higher-order rRNA structure is of importance for successful design and performance of in situ hybridization experiments. The entire ARB software package along with the probe accessibility data is available from the ARB home page http://www.arb-home.de.

Implementation of the INSPECT software package for statistical calculation in nuclear material accountability

International Nuclear Information System (INIS)

Marzo, M.A.S.

1986-01-01

The INSPECT software package was developed in the Pacific Northwest Laboratory for statistical calculations in nuclear material accountability. The programs apply the inspection and evaluation methodology described in Part of the Safeguards Technical Manual. In this paper the implementation of INSPECT at the Safeguards Division of CNEN, and the main characteristics of INSPECT are described. The potential applications of INSPECT to the nuclear material accountability is presented. (Author) [pt

Diffusion tensor imaging of the median nerve: intra-, inter-reader agreement, and agreement between two software packages

International Nuclear Information System (INIS)

Guggenberger, Roman; Nanz, Daniel; Puippe, Gilbert; Andreisek, Gustav; Rufibach, Kaspar; White, Lawrence M.; Sussman, Marshall S.

2012-01-01

To assess intra-, inter-reader agreement, and the agreement between two software packages for magnetic resonance diffusion tensor imaging (DTI) measurements of the median nerve. Fifteen healthy volunteers (seven men, eight women; mean age, 31.2 years) underwent DTI of both wrists at 1.5 T. Fractional anisotropy (FA) and apparent diffusion coefficient (ADC) of the median nerve were measured by three readers using two commonly used software packages. Measurements were repeated by two readers after 6 weeks. Intraclass correlation coefficients (ICC) and Bland-Altman analysis were used for statistical analysis. ICCs for intra-reader agreement ranged from 0.87 to 0.99, for inter-reader agreement from 0.62 to 0.83, and between the two software packages from 0.63 to 0.82. Bland-Altman analysis showed no differences for intra- and inter-reader agreement and agreement between software packages. The intra-, inter-reader, and agreement between software packages for DTI measurements of the median nerve were moderate to substantial suggesting that user- and software-dependent factors contribute little to variance in DTI measurements. (orig.)

STAR-GENERIS - a software package for information processing

International Nuclear Information System (INIS)

Felkel, L.

1985-01-01

Man-machine-communication in electrical power plants is increasingly based on the capabilities of minicomputers. Rather than just displaying raw process data more complex processing is done to aid operators by improving information quality. Advanced operator aids for nuclear power plants are, e.g. alarm reduction, disturbance analysis and expert systems. Operator aids use complex combinations and computations of plant signals, which have to be described in a formal and homogeneous way. The design of such computer-based information systems requires extensive software and engineering efforts. The STAR software concept reduces the software effort to a minimum by proving an advanced program package which facilitates specification and implementation of engineering know-how necessary for sophisticated operator aids. (orig./HP) [de

Novel applications of the x-ray tracing software package McXtrace

DEFF Research Database (Denmark)

Bergbäck Knudsen, Erik; Nielsen, Martin Meedom; Haldrup, Kristoffer

2014-01-01

We will present examples of applying the X-ray tracing software package McXtrace to different kinds of X-ray scattering experiments. In particular we will be focusing on time-resolved type experiments. Simulations of full scale experiments are particularly useful for this kind, especially when...... some of the issues encountered. Generally more than one or all of these effects are present at once. Simulations can in these cases be used to identify distinct footprints of such distortions and thus give the experimenter a means of deconvoluting them from the signal. We will present a study...... of this kind along with the newest developments of the McXtrace software package....

WannierTools: An open-source software package for novel topological materials

Science.gov (United States)

Wu, QuanSheng; Zhang, ShengNan; Song, Hai-Feng; Troyer, Matthias; Soluyanov, Alexey A.

2018-03-01

We present an open-source software package WannierTools, a tool for investigation of novel topological materials. This code works in the tight-binding framework, which can be generated by another software package Wannier90 (Mostofi et al., 2008). It can help to classify the topological phase of a given material by calculating the Wilson loop, and can get the surface state spectrum, which is detected by angle resolved photoemission (ARPES) and in scanning tunneling microscopy (STM) experiments. It also identifies positions of Weyl/Dirac points and nodal line structures, calculates the Berry phase around a closed momentum loop and Berry curvature in a part of the Brillouin zone (BZ).

MORTICIA, a statistical analysis software package for determining optical surveillance system effectiveness.

Science.gov (United States)

Ramkilowan, A.; Griffith, D. J.

2017-10-01

Surveillance modelling in terms of the standard Detect, Recognise and Identify (DRI) thresholds remains a key requirement for determining the effectiveness of surveillance sensors. With readily available computational resources it has become feasible to perform statistically representative evaluations of the effectiveness of these sensors. A new capability for performing this Monte-Carlo type analysis is demonstrated in the MORTICIA (Monte- Carlo Optical Rendering for Theatre Investigations of Capability under the Influence of the Atmosphere) software package developed at the Council for Scientific and Industrial Research (CSIR). This first generation, python-based open-source integrated software package, currently in the alpha stage of development aims to provide all the functionality required to perform statistical investigations of the effectiveness of optical surveillance systems in specific or generic deployment theatres. This includes modelling of the mathematical and physical processes that govern amongst other components of a surveillance system; a sensor's detector and optical components, a target and its background as well as the intervening atmospheric influences. In this paper we discuss integral aspects of the bespoke framework that are critical to the longevity of all subsequent modelling efforts. Additionally, some preliminary results are presented.

THE SOFTWARE PACKAGE FOR DATA STREAM SCRAMBLING

Directory of Open Access Journals (Sweden)

P. A. Kadiev

2016-01-01

Full Text Available Abstract. It is proposed a software package for multivariate stepwise transformation of the text flow in order to increase resistance to protect against unauthorized access, and a package to restore the converted text. The basis of the proposals: the formation of nxn-array from the elements of a data flow, preliminary transposition of the array elements to form an array, each row and each column of which includes one and one only element from each row and each column of the source array, following reading on the options selected by the user.Package for direct conversion includes: a module for forming an array from the input flow; transposition module of array elements according to the scheme of Latin squares; reading module of rows or columns of the array to one of the following algorithms: sequential reading; reading of rows or columns with even indices and then odd ones;reading the row or column with odd indices, and then the even; reading at random route, which is generated by the program; reading at the route determined by the user.Package for restoring of the original message by the inverse transform comprises: a channel array forming module from the data flow; recovery module from the channel array - the array of Latin square type; the original array module; the original message restoring module. 

Learn by Yourself: The Self-Learning Tools for Qualitative Analysis Software Packages

Science.gov (United States)

Freitas, Fábio; Ribeiro, Jaime; Brandão, Catarina; Reis, Luís Paulo; de Souza, Francislê Neri; Costa, António Pedro

2017-01-01

Computer Assisted Qualitative Data Analysis Software (CAQDAS) are tools that help researchers to develop qualitative research projects. These software packages help the users with tasks such as transcription analysis, coding and text interpretation, writing and annotation, content search and analysis, recursive abstraction, grounded theory…

Melanie II--a third-generation software package for analysis of two-dimensional electrophoresis images: II. Algorithms.

Science.gov (United States)

Appel, R D; Vargas, J R; Palagi, P M; Walther, D; Hochstrasser, D F

1997-12-01

After two generations of software systems for the analysis of two-dimensional electrophoresis (2-DE) images, a third generation of such software packages has recently emerged that combines state-of-the-art graphical user interfaces with comprehensive spot data analysis capabilities. A key characteristic common to most of these software packages is that many of their tools are implementations of algorithms that resulted from research areas such as image processing, vision, artificial intelligence or machine learning. This article presents the main algorithms implemented in the Melanie II 2-D PAGE software package. The applications of these algorithms, embodied as the feature of the program, are explained in an accompanying article (R. D. Appel et al.; Electrophoresis 1997, 18, 2724-2734).

Evaluating predictive models of software quality

International Nuclear Information System (INIS)

Ciaschini, V; Canaparo, M; Ronchieri, E; Salomoni, D

2014-01-01

Applications from High Energy Physics scientific community are constantly growing and implemented by a large number of developers. This implies a strong churn on the code and an associated risk of faults, which is unavoidable as long as the software undergoes active evolution. However, the necessities of production systems run counter to this. Stability and predictability are of paramount importance; in addition, a short turn-around time for the defect discovery-correction-deployment cycle is required. A way to reconcile these opposite foci is to use a software quality model to obtain an approximation of the risk before releasing a program to only deliver software with a risk lower than an agreed threshold. In this article we evaluated two quality predictive models to identify the operational risk and the quality of some software products. We applied these models to the development history of several EMI packages with intent to discover the risk factor of each product and compare it with its real history. We attempted to determine if the models reasonably maps reality for the applications under evaluation, and finally we concluded suggesting directions for further studies.

Evaluating Predictive Models of Software Quality

Science.gov (United States)

Ciaschini, V.; Canaparo, M.; Ronchieri, E.; Salomoni, D.

2014-06-01

Applications from High Energy Physics scientific community are constantly growing and implemented by a large number of developers. This implies a strong churn on the code and an associated risk of faults, which is unavoidable as long as the software undergoes active evolution. However, the necessities of production systems run counter to this. Stability and predictability are of paramount importance; in addition, a short turn-around time for the defect discovery-correction-deployment cycle is required. A way to reconcile these opposite foci is to use a software quality model to obtain an approximation of the risk before releasing a program to only deliver software with a risk lower than an agreed threshold. In this article we evaluated two quality predictive models to identify the operational risk and the quality of some software products. We applied these models to the development history of several EMI packages with intent to discover the risk factor of each product and compare it with its real history. We attempted to determine if the models reasonably maps reality for the applications under evaluation, and finally we concluded suggesting directions for further studies.

Development of a new control software package for Pakistan Research Reactor-2

International Nuclear Information System (INIS)

Qazi, M.K.

1993-05-01

The development of a new control software package for Pakistan Research Reactor-2 is presented. The software operates in different modes which comprises of surveillance, pre-operational self tests, operator, supervisor and robotic control. The control logic critically damp the system minimizing power overshoots. The software, handles multiple abnormal conditions, provides an elaborate access control and maintains startup/shutdown record. The report describes the functional details and covers the operational aspects of the new control software. (author)

The NOD3 software package: A graphical user interface-supported reduction package for single-dish radio continuum and polarisation observations

Science.gov (United States)

Müller, Peter; Krause, Marita; Beck, Rainer; Schmidt, Philip

2017-10-01

Context. The venerable NOD2 data reduction software package for single-dish radio continuum observations, which was developed for use at the 100-m Effelsberg radio telescope, has been successfully applied over many decades. Modern computing facilities, however, call for a new design. Aims: We aim to develop an interactive software tool with a graphical user interface for the reduction of single-dish radio continuum maps. We make a special effort to reduce the distortions along the scanning direction (scanning effects) by combining maps scanned in orthogonal directions or dual- or multiple-horn observations that need to be processed in a restoration procedure. The package should also process polarisation data and offer the possibility to include special tasks written by the individual user. Methods: Based on the ideas of the NOD2 package we developed NOD3, which includes all necessary tasks from the raw maps to the final maps in total intensity and linear polarisation. Furthermore, plot routines and several methods for map analysis are available. The NOD3 package is written in Python, which allows the extension of the package via additional tasks. The required data format for the input maps is FITS. Results: The NOD3 package is a sophisticated tool to process and analyse maps from single-dish observations that are affected by scanning effects from clouds, receiver instabilities, or radio-frequency interference. The "basket-weaving" tool combines orthogonally scanned maps into a final map that is almost free of scanning effects. The new restoration tool for dual-beam observations reduces the noise by a factor of about two compared to the NOD2 version. Combining single-dish with interferometer data in the map plane ensures the full recovery of the total flux density. Conclusions: This software package is available under the open source license GPL for free use at other single-dish radio telescopes of the astronomical community. The NOD3 package is designed to be

PsyToolkit: a software package for programming psychological experiments using Linux.

Science.gov (United States)

Stoet, Gijsbert

2010-11-01

PsyToolkit is a set of software tools for programming psychological experiments on Linux computers. Given that PsyToolkit is freely available under the Gnu Public License, open source, and designed such that it can easily be modified and extended for individual needs, it is suitable not only for technically oriented Linux users, but also for students, researchers on small budgets, and universities in developing countries. The software includes a high-level scripting language, a library for the programming language C, and a questionnaire presenter. The software easily integrates with other open source tools, such as the statistical software package R. PsyToolkit is designed to work with external hardware (including IoLab and Cedrus response keyboards and two common digital input/output boards) and to support millisecond timing precision. Four in-depth examples explain the basic functionality of PsyToolkit. Example 1 demonstrates a stimulus-response compatibility experiment. Example 2 demonstrates a novel mouse-controlled visual search experiment. Example 3 shows how to control light emitting diodes using PsyToolkit, and Example 4 shows how to build a light-detection sensor. The last two examples explain the electronic hardware setup such that they can even be used with other software packages.

Computer aided piping layout design in radiochemical plants- an improved software package

International Nuclear Information System (INIS)

Raju, R.P.; Siddiqui, H.R.

1995-01-01

A software package was developed and it was successfully implemented for the piping layout design of the four process cells of the Kalpakkam Reprocessing Project. This paper discusses in detail all the improvements and modifications that are being carried out in the package so that it becomes more meaningful and useful for implementation for the forthcoming radiochemical plants

Software for Library Management: Selection and Evaluation.

Science.gov (United States)

Notowitz, Carol I.

1987-01-01

This discussion of library software packages includes guidelines for library automation with microcomputers; criteria to aid in software selection; comparison of some features of available acquisitions, circulation and overdues software; references for software reviews; additional information on microsoftware; and a directory of producers and…

Evaluation of RDBMS packages for use in astronomy

Science.gov (United States)

Page, C. G.; Davenhall, A. C.

1992-01-01

Tabular data sets arise in many areas of astronomical data analysis, from raw data (such as photon event lists) to final results (such as source catalogs). The Starlink catalog access and reporting package, SCAR, was originally developed to handle IRAS data and it has been the principal relational DBMS in the Starlink software collection for several years. But SCAR has many limitations and is VMS-specific, while Starlink is in transition from VMS to Unix. Rather than attempt a major re-write of SCAR for Unix, it seemed more sensible to see whether any existing database packages are suitable for general astronomical use. The authors first drew up a list of desirable properties for such a system and then used these criteria to evaluate a number of packages, both free ones and those commercially available. It is already clear that most commercial DBMS packages are not very well suited to the requirements; for example, most cannot carry out efficiently even fairly basic operations such as joining two catalogs on an approximate match of celestial positions. This paper reports the results of the evaluation exercise and notes the problems in using a standard DBMS package to process scientific data. In parallel with this the authors have started to develop a simple database engine that can handle tabular data in a range of common formats including simple direct-access files (such as SCAR and Exosat DBMS tables) and FITS tables (both ASCII and binary).

Development and Evaluation of an Open-Source Software Package “CGITA” for Quantifying Tumor Heterogeneity with Molecular Images

Directory of Open Access Journals (Sweden)

Yu-Hua Dean Fang

2014-01-01

Full Text Available Background. The quantification of tumor heterogeneity with molecular images, by analyzing the local or global variation in the spatial arrangements of pixel intensity with texture analysis, possesses a great clinical potential for treatment planning and prognosis. To address the lack of available software for computing the tumor heterogeneity on the public domain, we develop a software package, namely, Chang-Gung Image Texture Analysis (CGITA toolbox, and provide it to the research community as a free, open-source project. Methods. With a user-friendly graphical interface, CGITA provides users with an easy way to compute more than seventy heterogeneity indices. To test and demonstrate the usefulness of CGITA, we used a small cohort of eighteen locally advanced oral cavity (ORC cancer patients treated with definitive radiotherapies. Results. In our case study of ORC data, we found that more than ten of the current implemented heterogeneity indices outperformed SUVmean for outcome prediction in the ROC analysis with a higher area under curve (AUC. Heterogeneity indices provide a better area under the curve up to 0.9 than the SUVmean and TLG (0.6 and 0.52, resp.. Conclusions. CGITA is a free and open-source software package to quantify tumor heterogeneity from molecular images. CGITA is available for free for academic use at http://code.google.com/p/cgita.

CT and MR perfusion can discriminate severe cerebral hypoperfusion from perfusion absence: evaluation of different commercial software packages by using digital phantoms

Energy Technology Data Exchange (ETDEWEB)

Uwano, Ikuko; Kudo, Kohsuke; Sasaki, Makoto [Iwate Medical University, Advanced Medical Research Center, Morioka (Japan); Christensen, Soren [University of Melbourne, Royal Melbourne Hospital, Departments of Neurology and Radiology, Victoria (Australia); Oestergaard, Leif [Aarhus University Hospital, Department of Neuroradiology, Center for Functionally Integrative Neuroscience, DK, Aarhus C (Denmark); Ogasawara, Kuniaki; Ogawa, Akira [Iwate Medical University, Department of Neurosurgery, Morioka (Japan)

2012-05-15

Computed tomography perfusion (CTP) and magnetic resonance perfusion (MRP) are expected to be usable for ancillary tests of brain death by detection of complete absence of cerebral perfusion; however, the detection limit of hypoperfusion has not been determined. Hence, we examined whether commercial software can visualize very low cerebral blood flow (CBF) and cerebral blood volume (CBV) by creating and using digital phantoms. Digital phantoms simulating 0-4% of normal CBF (60 mL/100 g/min) and CBV (4 mL/100 g/min) were analyzed by ten software packages of CT and MRI manufacturers. Region-of-interest measurements were performed to determine whether there was a significant difference between areas of 0% and areas of 1-4% of normal flow. The CTP software detected hypoperfusion down to 2-3% in CBF and 2% in CBV, while the MRP software detected that of 1-3% in CBF and 1-4% in CBV, although the lower limits varied among software packages. CTP and MRP can detect the difference between profound hypoperfusion of <5% from that of 0% in digital phantoms, suggesting their potential efficacy for assessing brain death. (orig.)

ACEMAN (II): a PDP-11 software package for acoustic emission analysis

International Nuclear Information System (INIS)

Tobias, A.

1976-01-01

A powerful, but easy-to-use, software package (ACEMAN) for acoustic emission analysis has been developed at Berkeley Nuclear Laboratories. The system is based on a PDP-11 minicomputer with 24 K of memory, an RK05 DISK Drive and a Tektronix 4010 Graphics terminal. The operation of the system is described in detail in terms of the functions performed in response to the various command mnemonics. The ACEMAN software package offers many useful facilities not found on other acoustic emission monitoring systems. Its main features, many of which are unique, are summarised. The ACEMAN system automatically handles arrays of up to 12 sensors in real-time operation during which data are acquired, analysed, stored on the computer disk for future analysis and displayed on the terminal if required. (author)

Radiative transfer through terrestrial atmosphere and ocean: Software package SCIATRAN

International Nuclear Information System (INIS)

Rozanov, V.V.; Rozanov, A.V.; Kokhanovsky, A.A.; Burrows, J.P.

2014-01-01

SCIATRAN is a comprehensive software package for the modeling of radiative transfer processes in the terrestrial atmosphere and ocean in the spectral range from the ultraviolet to the thermal infrared (0.18–40μm) including multiple scattering processes, polarization, thermal emission and ocean–atmosphere coupling. The software is capable of modeling spectral and angular distributions of the intensity or the Stokes vector of the transmitted, scattered, reflected, and emitted radiation assuming either a plane-parallel or a spherical atmosphere. Simulations are done either in the scalar or in the vector mode (i.e. accounting for the polarization) for observations by space-, air-, ship- and balloon-borne, ground-based, and underwater instruments in various viewing geometries (nadir, off-nadir, limb, occultation, zenith-sky, off-axis). All significant radiative transfer processes are accounted for. These are, e.g. the Rayleigh scattering, scattering by aerosol and cloud particles, absorption by gaseous components, and bidirectional reflection by an underlying surface including Fresnel reflection from a flat or roughened ocean surface. The software package contains several radiative transfer solvers including finite difference and discrete-ordinate techniques, an extensive database, and a specific module for solving inverse problems. In contrast to many other radiative transfer codes, SCIATRAN incorporates an efficient approach to calculate the so-called Jacobians, i.e. derivatives of the intensity with respect to various atmospheric and surface parameters. In this paper we discuss numerical methods used in SCIATRAN to solve the scalar and vector radiative transfer equation, describe databases of atmospheric, oceanic, and surface parameters incorporated in SCIATRAN, and demonstrate how to solve some selected radiative transfer problems using the SCIATRAN package. During the last decades, a lot of studies have been published demonstrating that SCIATRAN is a valuable

In-field inspection support software: A status report on the Common Inspection On-site Software Package (CIOSP) project

International Nuclear Information System (INIS)

Novatchev, Dimitre; Titov, Pavel; Siradjov, Bakhtiiar; Vlad, Ioan; Xiao Jing

2001-01-01

Full text: IAEA has invested much thought and effort into developing software that can assist inspectors during their inspection work. Experience with such applications has been steadily growing and IAEA has recently commissioned a next-generation software package. This kind of software accommodates inspection tasks that can vary substantially in function depending on the type of installation being inspected as well as ensures that the resulting software package has a wide range of usability and can preclude excessive development of plant-specific applications. The Common Inspection On-site Software Package is being developed in the Department of Safeguards to address the limitations of the existing software and to expand its coverage of the inspection process. CIOSP is 'common' in that it is aimed at providing support for as many facilities as possible with the minimum re-configuration. At the same time it has to cater to varying needs of individual facilities, different instrumentation and verification methods used. A component-based approach was taken to successfully tackle the challenges that the development of this software presented. CIOSP consists of the following major components: A framework into which individual plug-ins supporting various inspection activities can integrate at run-time; A central data store containing all facility configuration data and all data collected during inspections; A local data store, which resides on the inspector's computer, where the current inspection's data is stored; A set of services used by all plug-ins (i.e. data transformation, authentication, replication services etc.). This architecture allows for incremental development and extension of the software with plug-ins that support individual inspection activities. The core set of components along with the framework, the Inventory Verification, Book Examination and Records and Reports Comparison plug-ins have been developed. The development of the Short Notice Random

PyPedal, an open source software package for pedigree analysis

Science.gov (United States)

The open source software package PyPedal (http://pypedal.sourceforge.net/) was first released in 2002, and provided users with a set of simple tools for manipulating pedigrees. Its flexibility has been demonstrated by its used in a number of settings for large and small populations. After substantia...

MEASURE/ANOMTEST. Anomaly detection software package for the Dodewaard power plant facility. Supplement 1. Extension of measurement analysis part, addition of plot package

International Nuclear Information System (INIS)

Schoonewelle, H.

1995-01-01

The anomaly detection software package installed at the Dodewaard nuclear power plant has been revised with respect to the part of the measurement analysis. A plot package has been added to the package. Signals in which an anomaly has been detected are automatically plotted including the uncertainty margins of the signals. This report gives a description of the revised measurement analysis part and the plot package. Each new routine of the plot package is described briefly and the new input and output files are given. (orig.)

Information technologies and software packages for education of specialists in materials science [In Russian

NARCIS (Netherlands)

Krzhizhanovskaya, V.; Ryaboshuk, S.

2009-01-01

This paper presents methodological materials, interactive text-books and software packages developed and extensively used for education of specialists in materials science. These virtual laboratories for education and research are equipped with tutorials and software environment for modeling complex

Integrated software package for nuclear material safeguards in a MOX fuel fabrication facility

International Nuclear Information System (INIS)

Schreiber, H.J.; Piana, M.; Moussalli, G.; Saukkonen, H.

2000-01-01

Since computerized data processing was introduced to Safeguards at large bulk handling facilities, a large number of individual software applications have been developed for nuclear material Safeguards implementation. Facility inventory and flow data are provided in computerized format for performing stratification, sample size calculation and selection of samples for destructive and non-destructive assay. Data is collected from nuclear measurement systems running in attended, unattended mode and more recently from remote monitoring systems controlled. Data sets from various sources have to be evaluated for Safeguards purposes, such as raw data, processed data and conclusions drawn from data evaluation results. They are reported in computerized format at the International Atomic Energy Agency headquarters and feedback from the Agency's mainframe computer system is used to prepare and support Safeguards inspection activities. The integration of all such data originating from various sources cannot be ensured without the existence of a common data format and a database system. This paper describes the fundamental relations between data streams, individual data processing tools, data evaluation results and requirements for an integrated software solution to facilitate nuclear material Safeguards at a bulk handling facility. The paper also explains the basis for designing a software package to manage data streams from various data sources and for incorporating diverse data processing tools that until now have been used independently from each other and under different computer operating systems. (author)

Validation of a Video Analysis Software Package for Quantifying Movement Velocity in Resistance Exercises.

Science.gov (United States)

Sañudo, Borja; Rueda, David; Pozo-Cruz, Borja Del; de Hoyo, Moisés; Carrasco, Luis

2016-10-01

Sañudo, B, Rueda, D, del Pozo-Cruz, B, de Hoyo, M, and Carrasco, L. Validation of a video analysis software package for quantifying movement velocity in resistance exercises. J Strength Cond Res 30(10): 2934-2941, 2016-The aim of this study was to establish the validity of a video analysis software package in measuring mean propulsive velocity (MPV) and the maximal velocity during bench press. Twenty-one healthy males (21 ± 1 year) with weight training experience were recruited, and the MPV and the maximal velocity of the concentric phase (Vmax) were compared with a linear position transducer system during a standard bench press exercise. Participants performed a 1 repetition maximum test using the supine bench press exercise. The testing procedures involved the simultaneous assessment of bench press propulsive velocity using 2 kinematic (linear position transducer and semi-automated tracking software) systems. High Pearson's correlation coefficients for MPV and Vmax between both devices (r = 0.473 to 0.993) were observed. The intraclass correlation coefficients for barbell velocity data and the kinematic data obtained from video analysis were high (>0.79). In addition, the low coefficients of variation indicate that measurements had low variability. Finally, Bland-Altman plots with the limits of agreement of the MPV and Vmax with different loads showed a negative trend, which indicated that the video analysis had higher values than the linear transducer. In conclusion, this study has demonstrated that the software used for the video analysis was an easy to use and cost-effective tool with a very high degree of concurrent validity. This software can be used to evaluate changes in velocity of training load in resistance training, which may be important for the prescription and monitoring of training programmes.

The GeoSteiner software package for computing Steiner trees in the plane

DEFF Research Database (Denmark)

Juhl, Daniel; Warme, David M.; Winter, Pawel

The GeoSteiner software package has for more than 10 years been the fastest (publicly available) program for computing exact solutions to Steiner tree problems in the plane. The computational study by Warme, Winter and Zachariasen, published in 2000, documented the performance of the GeoSteiner...... approach --- allowing the exact solution of Steiner tree problems with more than a thousand terminals. Since then, a number of algorithmic enhancements have improved the performance of the software package significantly. In this computational study we run the current code on the largest problem instances...... from the 2000-study, and on a number of larger problem instances. The computational study is performed using both the publicly available GeoSteiner 3.1 code base, and the commercial GeoSteiner 4.0 code base....

Software for Managing Personal Files.

Science.gov (United States)

Lundeen, Gerald

1989-01-01

Discusses the special characteristics of personal file management software and compares four microcomputer software packages: Notebook II with Bibliography and Convert, Pro-Cite with Biblio-Links, askSam, and Reference Manager. Each package is evaluated in terms of the user interface, file maintenance, retrieval capabilities, output, and…

Browndye: A software package for Brownian dynamics

Science.gov (United States)

Huber, Gary A.; McCammon, J. Andrew

2010-11-01

A new software package, Browndye, is presented for simulating the diffusional encounter of two large biological molecules. It can be used to estimate second-order rate constants and encounter probabilities, and to explore reaction trajectories. Browndye builds upon previous knowledge and algorithms from software packages such as UHBD, SDA, and Macrodox, while implementing algorithms that scale to larger systems. Program summaryProgram title: Browndye Catalogue identifier: AEGT_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEGT_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: MIT license, included in distribution No. of lines in distributed program, including test data, etc.: 143 618 No. of bytes in distributed program, including test data, etc.: 1 067 861 Distribution format: tar.gz Programming language: C++, OCaml ( http://caml.inria.fr/) Computer: PC, Workstation, Cluster Operating system: Linux Has the code been vectorised or parallelized?: Yes. Runs on multiple processors with shared memory using pthreads RAM: Depends linearly on size of physical system Classification: 3 External routines: uses the output of APBS [1] ( http://www.poissonboltzmann.org/apbs/) as input. APBS must be obtained and installed separately. Expat 2.0.1, CLAPACK, ocaml-expat, Mersenne Twister. These are included in the Browndye distribution. Nature of problem: Exploration and determination of rate constants of bimolecular interactions involving large biological molecules. Solution method: Brownian dynamics with electrostatic, excluded volume, van der Waals, and desolvation forces. Running time: Depends linearly on size of physical system and quadratically on precision of results. The included example executes in a few minutes.

TensorPack: a Maple-based software package for the manipulation of algebraic expressions of tensors in general relativity

International Nuclear Information System (INIS)

Huf, P A; Carminati, J

2015-01-01

In this paper we: (1) introduce TensorPack, a software package for the algebraic manipulation of tensors in covariant index format in Maple; (2) briefly demonstrate the use of the package with an orthonormal tensor proof of the shearfree conjecture for dust. TensorPack is based on the Riemann and Canon tensor software packages and uses their functions to express tensors in an indexed covariant format. TensorPack uses a string representation as input and provides functions for output in index form. It extends the functionality to basic algebra of tensors, substitution, covariant differentiation, contraction, raising/lowering indices, symmetry functions and other accessory functions. The output can be merged with text in the Maple environment to create a full working document with embedded dynamic functionality. The package offers potential for manipulation of indexed algebraic tensor expressions in a flexible software environment. (paper)

Three dimensional field computation software package DE3D and its applications

International Nuclear Information System (INIS)

Fan Mingwu; Zhang Tianjue; Yan Weili

1992-07-01

A software package, DE3D that can be run on PC for three dimensional electrostatic and magnetostatic field analysis has been developed in CIAE (China Institute of Atomic Energy). Two scalar potential method and special numerical techniques have made the code with high precision. It can be used for electrostatic and magnetostatic fields computations with complex boundary conditions. In the most cases, the result accuracy is better than 1% comparing with the measured. In some situations, the results are more acceptable than the other codes because some tricks are used for the current integral. Typical examples, design of a cyclotron magnet and magnetic elements on its beam transport line, given in the paper show how the program helps the designer to improve the design of the product. The software package could bring advantages to the producers and designers

Software Package for the Technical Support Centre

International Nuclear Information System (INIS)

Tomisa, T.; Skanata, D.; Sucic, B.

2002-01-01

The continued radiological surveillance system has been technically improved during the last two years by establishing 11 new automatic stations, so that there are currently 14 locations with installed gamma-monitors for air radiation monitoring on the Croatian national territory. Given that the original system had been designed primarily for gathering data for off-line treatment with the purpose of statistical analyses, the contemporary Radiological Early Warning System (SPRU) approach has demanded developing of a new software by the Technical Support Centre (TPC) in order to allow operators interactive work in the case of emergency situations. The outcome of this development is a software package called DORAP (Automatic Radiological Station Remote Reading), which brings together automatic functions of continual data gathering, daily production of the standard report, distribution of the report by fax, SMS (Short Message Service), SMT (Simple Mail Transfer) and FTP (File Transfer Protocol) as well as generation and distribution of alarms in the case of failure in the system or exceeding of the set radiation intensity values. (author)

Recent developments on PLASMAKIN - a software package to model the kinetics in gas discharges

International Nuclear Information System (INIS)

Pinhao, N R

2009-01-01

PLASMAKIN is a user-friendly software package to handle physical and chemical data used in plasma physics modeling and to compute the production and destruction terms in fluid models equations. These terms account for the particle or energy production and loss rates due to gas-phase and gas-surface reactions. The package has been restructured and expanded to (a) allow the simulation of atomic emission spectra taking into account line broadening processes and radiation trapping; (b) include a library to compute the electron kinetics; (c) include a database of species properties and reactions and, (d) include a Python interface to allow access from scripts and integration with other scientific software tools.

Reliability and accuracy of three imaging software packages used for 3D analysis of the upper airway on cone beam computed tomography images.

Science.gov (United States)

Chen, Hui; van Eijnatten, Maureen; Wolff, Jan; de Lange, Jan; van der Stelt, Paul F; Lobbezoo, Frank; Aarab, Ghizlane

2017-08-01

The aim of this study was to assess the reliability and accuracy of three different imaging software packages for three-dimensional analysis of the upper airway using CBCT images. To assess the reliability of the software packages, 15 NewTom 5G ® (QR Systems, Verona, Italy) CBCT data sets were randomly and retrospectively selected. Two observers measured the volume, minimum cross-sectional area and the length of the upper airway using Amira ® (Visage Imaging Inc., Carlsbad, CA), 3Diagnosys ® (3diemme, Cantu, Italy) and OnDemand3D ® (CyberMed, Seoul, Republic of Korea) software packages. The intra- and inter-observer reliability of the upper airway measurements were determined using intraclass correlation coefficients and Bland & Altman agreement tests. To assess the accuracy of the software packages, one NewTom 5G ® CBCT data set was used to print a three-dimensional anthropomorphic phantom with known dimensions to be used as the "gold standard". This phantom was subsequently scanned using a NewTom 5G ® scanner. Based on the CBCT data set of the phantom, one observer measured the volume, minimum cross-sectional area, and length of the upper airway using Amira ® , 3Diagnosys ® , and OnDemand3D ® , and compared these measurements with the gold standard. The intra- and inter-observer reliability of the measurements of the upper airway using the different software packages were excellent (intraclass correlation coefficient ≥0.75). There was excellent agreement between all three software packages in volume, minimum cross-sectional area and length measurements. All software packages underestimated the upper airway volume by -8.8% to -12.3%, the minimum cross-sectional area by -6.2% to -14.6%, and the length by -1.6% to -2.9%. All three software packages offered reliable volume, minimum cross-sectional area and length measurements of the upper airway. The length measurements of the upper airway were the most accurate results in all software packages. All

Software package for the design and analysis of DNA origami structures

DEFF Research Database (Denmark)

Andersen, Ebbe Sloth; Nielsen, Morten Muhlig; Dong, Mingdong

was observed on the mica surface with a fraction of the dolphin nanostructures showing extensive tail flexibility of approximately 90 degrees. The Java editor and tools are free software distributed under the GNU license. The open architecture of the editor makes it easy for the scientific community......A software package was developed for the semi-automated design of DNA origamis and further data analysis of Atomic Force Microscopy (AFM) images. As an example, we design the shape of a bottlenose dolphin and analyze it by means of high resolution AFM imaging. A high yield of DNA dolphins...... to contribute new tools and functionalities. Documentation, tutorials and software will be made available online....

Investigating the effects of different factors on development of open source enterprise resources planning software packages

Directory of Open Access Journals (Sweden)

Mehdi Ghorbaninia

2014-08-01

Full Text Available This paper investigates the effects of different factors on development of open source enterprise resources planning software packages. The study designs a questionnaire in Likert scale and distributes it among 210 experts in the field of open source software package development. Cronbach alpha has been calculated as 0.93, which is well above the minimum acceptable level. Using Pearson correlation as well as stepwise regression analysis, the study determines three most important factors including fundamental issues, during and after implementation of open source software development. The study also determines a positive and strong relationship between fundamental factors and after implementation factors (r=0.9006, Sig. = 0.000.

ANALYSIS OF CELLULAR REACTION TO IFN-γ STIMULATION BY A SOFTWARE PACKAGE GeneExpressionAnalyser

Directory of Open Access Journals (Sweden)

A. V. Saetchnikov

2014-01-01

Full Text Available The software package GeneExpressionAnalyser for analysis of the DNA microarray experi-mental data has been developed. The algorithms of data analysis, differentially expressed genes and biological functions of the cell are described. The efficiency of the developed package is tested on the published experimental data devoted to the time-course research of the changes in the human cell un-der the influence of IFN-γ on melanoma. The developed software has a number of advantages over the existing software: it is free, has a simple and intuitive graphical interface, allows to analyze different types of DNA microarrays, contains a set of methods for complete data analysis and performs effec-tive gene annotation for a selected list of genes.

SEDA: A software package for the Statistical Earthquake Data Analysis

Science.gov (United States)

Lombardi, A. M.

2017-03-01

In this paper, the first version of the software SEDA (SEDAv1.0), designed to help seismologists statistically analyze earthquake data, is presented. The package consists of a user-friendly Matlab-based interface, which allows the user to easily interact with the application, and a computational core of Fortran codes, to guarantee the maximum speed. The primary factor driving the development of SEDA is to guarantee the research reproducibility, which is a growing movement among scientists and highly recommended by the most important scientific journals. SEDAv1.0 is mainly devoted to produce accurate and fast outputs. Less care has been taken for the graphic appeal, which will be improved in the future. The main part of SEDAv1.0 is devoted to the ETAS modeling. SEDAv1.0 contains a set of consistent tools on ETAS, allowing the estimation of parameters, the testing of model on data, the simulation of catalogs, the identification of sequences and forecasts calculation. The peculiarities of routines inside SEDAv1.0 are discussed in this paper. More specific details on the software are presented in the manual accompanying the program package.

Software packages for simulating groundwater flow and the spreading of soluble and insoluble admixtures in aquifers

International Nuclear Information System (INIS)

Roshal, A.A.; Klein, I.S.; Svishchov, A.M.

1993-01-01

Software programs are described designed for solving hydrogeological and environmental problems related to the analysis and prediction of groundwater flow and the spreading of solutes and insolubles in the saturated zones. The software package GWFS (Ground Water Flow Simulation) allows for simulating steady-state and unsteady-state flow in confined, unconfined, and confined-unconfined multi-layer and quasi-3D isotropic and anisotropic aquifer systems. Considered are intra-layer sources and sinks, infiltration, inter-layer leakages, the interrelationships with surface reservoirs and streams, interrelationships with the drains, aquifer discharge to surface sources. The MTS (Mass Transport Simulation) package is designed for solving solute transport problems. Taken into account is convective transport, hydrodynamic dispersion and diffusion, linear equilibrium sorption. The method of characteristics is being implemented here using the ''particles-in-cells'' scheme in which the transport is modeled with the help of tracers. The software package OWFS (Oil-Water Flow Simulation) is designed for the simulation of hydrocarbon (oil-water) migration in aquifers

DISPL: a software package for one and two spatially dimensioned kinetics-diffusion problems. [FORTRAN for IBM computers

Energy Technology Data Exchange (ETDEWEB)

Leaf, G K; Minkoff, M; Byrne, G D; Sorensen, D; Bleakney, T; Saltzman, J

1978-11-01

DISPL is a software package for solving some second-order nonlinear systems of partial differential equations including parabolic, elliptic, hyperbolic, and some mixed types such as parabolic--elliptic equations. Fairly general nonlinear boundary conditions are allowed as well as interface conditions for problems in an inhomogeneous media. The spatial domain is one- or two-dimensional with Cartesian, cylindrical, or spherical (in one dimension only) geometry. The numerical method is based on the use of Galerkin's procedure combined with the use of B-splines in order to reduce the system of PDE's to a system of ODE's. The latter system is then solved with a sophisticated ODE software package. Software features include extensive dump/restart facilities, free format input, moderate printed output capability, dynamic storage allocation, and three graphics packages. 17 figures, 9 tables.

NEAMS Software Licensing, Release, and Distribution: Implications for FY2013 Work Package Planning

International Nuclear Information System (INIS)

Bernholdt, David E.

2012-01-01

The vision of the NEAMS program is to bring truly predictive modeling and simulation (M and S) capabilities to the nuclear engineering community in order to enable a new approach to the analysis of nuclear systems. NEAMS anticipates issuing in FY 2018 a full release of its computational 'Fermi Toolkit' aimed at advanced reactor and fuel cycles. The NEAMS toolkit involves extensive software development activities, some of which have already been underway for several years, however, the Advanced Modeling and Simulation Office (AMSO), which sponsors the NEAMS program, has not yet issued any official guidance regarding software licensing, release, and distribution policies. This motivated an FY12 task in the Capability Transfer work package to develop and recommend an appropriate set of policies. The current preliminary report is intended to provide awareness of issues with implications for work package planning for FY13. We anticipate a small amount of effort associated with putting into place formal licenses and contributor agreements for NEAMS software which doesn't already have them. We do not anticipate any additional effort or costs associated with software release procedures or schedules beyond those dictated by the quality expectations for the software. The largest potential costs we anticipate would be associated with the setup and maintenance of shared code repositories for development and early access to NEAMS software products. We also anticipate an opportunity, with modest associated costs, to work with the Radiation Safety Information Computational Center (RSICC) to clarify export control assessment policies for software under development.

Pixelman: a multi-platform data acquisition and processing software package for Medipix2, Timepix and Medipix3 detectors

International Nuclear Information System (INIS)

Turecek, D; Holy, T; Jakubek, J; Pospisil, S; Vykydal, Z

2011-01-01

The semiconductor pixel detectors Medipix2, Timepix and Medipix3 (256x256 square pixels, 55x55 μm each) are superior imaging devices in terms of spatial resolution, linearity and dynamic range. This makes them suitable for various applications such as radiography, neutronography, micro-tomography and X-ray dynamic defectoscopy. In order to control and manage such complex measurements a multi-platform software package for acquisition and data processing with a Java graphical user interface has been developed. The functionality of the original version of Pixelman package has been upgraded and extended to include the new medipix devices. The software package can be run on Microsoft Windows, Linux and Mac OS X operating systems. The architecture is very flexible and the functionality can be extended by plugins in C++, Java or combinations of both. The software package may be used as a distributed acquisition system using computers with different operating systems over a local network or the Internet.

Pixelman: a multi-platform data acquisition and processing software package for Medipix2, Timepix and Medipix3 detectors

Energy Technology Data Exchange (ETDEWEB)

Turecek, D; Holy, T; Jakubek, J; Pospisil, S; Vykydal, Z, E-mail: daniel.turecek@utef.cvut.cz [Institute of Experimental and Applied Physics, Czech Technical University in Prague, Horska 3a/22, 12800 Prague 2 (Czech Republic)

2011-01-15

The semiconductor pixel detectors Medipix2, Timepix and Medipix3 (256x256 square pixels, 55x55 {mu}m each) are superior imaging devices in terms of spatial resolution, linearity and dynamic range. This makes them suitable for various applications such as radiography, neutronography, micro-tomography and X-ray dynamic defectoscopy. In order to control and manage such complex measurements a multi-platform software package for acquisition and data processing with a Java graphical user interface has been developed. The functionality of the original version of Pixelman package has been upgraded and extended to include the new medipix devices. The software package can be run on Microsoft Windows, Linux and Mac OS X operating systems. The architecture is very flexible and the functionality can be extended by plugins in C++, Java or combinations of both. The software package may be used as a distributed acquisition system using computers with different operating systems over a local network or the Internet.

Current status and future direction of the MONK software package

International Nuclear Information System (INIS)

Smith, Nigel; Armishaw, Malcolm; Cooper, Andrew

2003-01-01

The current status of the MONK criticality software package is summarized in terms of recent and current developments and envisaged directions for the future. The areas of the discussion are physics modeling, geometry modeling, source modeling, nuclear data, validation, supporting tools and customer services. In future development plan, MONK continues to be focused on meeting the short and long-term needs of the code user community. (J.P.N.)

Nonlinear analysis of reinforced concrete structures using software package abaqus

OpenAIRE

Marković Nemanja; Stojić Dragoslav; Cvetković Radovan

2014-01-01

Reinforced concrete (AB) is characterized by huge inhomogeneity resulting from the material characteristics of the concrete, then, quasi-brittle behavior during failure. These and other phenomena require the introduction of material nonlinearity in the modeling of reinforced concrete structures. This paper presents the modeling reinforced concrete in the software package ABAQUS. A brief theoretical overview is presented of methods such as: Concrete Damage Plasticity (CDP), Smeared Concrete Cr...

A PC-based software package for modeling DOE mixed-waste management options

International Nuclear Information System (INIS)

Abashian, M.S.; Carney, C.; Schum, K.

1995-02-01

The U.S. Department of Energy (DOE) Headquarters and associated contractors have developed an IBM PC-based software package that estimates costs, schedules, and public and occupational health risks for a range of mixed-waste management options. A key application of the software package is the comparison of various waste-treatment options documented in the draft Site Treatment Plans prepared in accordance with the requirements of the Federal Facility Compliance Act of 1992. This automated Systems Analysis Methodology consists of a user interface for configuring complexwide or site-specific waste-management options; calculational algorithms for cost, schedule and risk; and user-selected graphical or tabular output of results. The mixed-waste management activities modeled in the automated Systems Analysis Methodology include waste storage, characterization, handling, transportation, treatment, and disposal. Analyses of treatment options identified in the draft Site Treatment Plans suggest potential cost and schedule savings from consolidation of proposed treatment facilities. This paper presents an overview of the automated Systems Analysis Methodology

The quality and testing PH-SFT infrastructure for the external LHC software packages deployment

CERN Multimedia

CERN. Geneva; MENDEZ LORENZO, Patricia; MATO VILA, Pere

2015-01-01

The PH-SFT group is responsible for the build, test, and deployment of the set of external software packages used by the LHC experiments. This set includes ca. 170 packages including Grid packages and Montecarlo generators provided for different versions. A complete build structure has been established to guarantee the quality of the packages provided by the group. This structure includes an experimental build and three daily nightly builds, each of them dedicated to a specific ROOT version including v6.02, v6.04, and the master. While the former build is dedicated to the test of new packages, versions and dependencies (basically SFT internal used), the three latter ones are the responsible for the deployment to AFS of the set of stable and well tested packages requested by the LHC experiments so they can apply their own builds on top. In all cases, a c...

InterFace: A software package for face image warping, averaging, and principal components analysis.

Science.gov (United States)

Kramer, Robin S S; Jenkins, Rob; Burton, A Mike

2017-12-01

We describe InterFace, a software package for research in face recognition. The package supports image warping, reshaping, averaging of multiple face images, and morphing between faces. It also supports principal components analysis (PCA) of face images, along with tools for exploring the "face space" produced by PCA. The package uses a simple graphical user interface, allowing users to perform these sophisticated image manipulations without any need for programming knowledge. The program is available for download in the form of an app, which requires that users also have access to the (freely available) MATLAB Runtime environment.

Quantitation of magnetic resonance spectroscopy signals: the jMRUI software package

Czech Academy of Sciences Publication Activity Database

Stefan, D.; Di Cesare, F.; Andrasescu, A.; Popa, E.; Lazariev, A.; Vescovo, E.; Štrbák, Oliver; Williams, S.; Starčuk jr., Zenon; Cabanas, M.; van Ormondt, D.; Graveron-Demilly, D.

2009-01-01

Roč. 20, č. 10 (2009), 104035:1-9 ISSN 0957-0233 Grant - others:EC 6FP(XE) MRTN-CT-2006-035801 Source of funding: R - rámcový projekt EK Keywords : MR spectroscopy * MRS * MRSI * HRMAS-NMR * jMRUI software package * Java * plug-ins * quantitation Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 1.317, year: 2009

Integrated software system for seismic evaluation of nuclear power plant structures

International Nuclear Information System (INIS)

Xu, J.; Graves, H.L.

1993-01-01

The computer software CARES (Computer Analysis for Rapid Evaluation of Structures) was developed by the Brookhaven National Laboratory for the U.S. Nuclear Regulatory Commission. It represents an effort to utilize established numerical methodologies commonly employed by industry for structural safety evaluations of nuclear power plant facilities and incorporates them into an integrated computer software package operated on personal computers. CARES was developed with the objective of including all aspects of seismic performance evaluation of nuclear power structures. It can be used to evaluate the validity and accuracy of analysis methodologies used for structural safety evaluations of nuclear power plants by various utilities. CARES has a modular format, each module performing a specific type of analysis. The seismic module integrates all the steps of a complete seismic analysis into a single package with many user-friendly features such as interactiveness and quick turnaround. Linear structural theory and pseudo-linear convolution theory are utilized as the bases for the development with a special emphasis on the nuclear regulatory requirements for structural safety of nuclear plants. The organization of the seismic module is arranged in eight options, each performing a specific step of the analysis with most of input/output interfacing processed by the general manager. Finally, CARES provides comprehensive post-processing capability for displaying results graphically or in tabular form so that direct comparisons can be easily made. (author)

Beyond Open Source: Evaluating the Community Availability of Software

Directory of Open Access Journals (Sweden)

Bret Davidson

2016-01-01

Full Text Available The Code4Lib community has produced an increasingly impressive collection of open source software over the last decade, but much of this creative work remains out of reach for large portions of the library community. Do the relatively privileged institutions represented by a majority of Code4Lib participants have a professional responsibility to support the adoption of their innovations? Drawing from old and new software packaging and distribution approaches (from freeware to Docker, we propose extending the open source software values of collaboration and transparency to include the wide and affordable distribution of software. We believe this will not only simplify the process of sharing our applications within the library community, but also make it possible for less well-resourced institutions to actually use our software. We identify areas of need, present our experiences with the users of our own open source projects, discuss our attempts to go beyond open source, propose a preliminary set of technology availability performance indicators for evaluating software availability, and make an argument for the internal value of supporting and encouraging a vibrant library software ecosystem.

Strategy and Software Application of Fresh Produce Package Design to Attain Optimal Modified Atmosphere

Directory of Open Access Journals (Sweden)

Dong Sun Lee

2014-01-01

Full Text Available Modified atmosphere packaging of fresh produce relies on the attainment of desired gas concentration inside the package resulting from product respiration and package’s gas transfer. Systematic package design method to achieve the target modified atmosphere was developed and constructed as software in terms of selecting the most appropriate film, microperforations, and/or CO2 scavenger. It incorporates modeling and/or database construction on the produce respiration, gas transfer across the plastic film and microperforation, and CO2 absorption by the scavenger. The optimization algorithm first selects the packaging film and/or microperforations to have the target O2 concentration in response to the respiration and then tunes the CO2 concentration by CO2 absorber when it goes above its tolerance limit. The optimization method tested for green pepper, strawberry, and king oyster mushroom packages was shown to be effective to design the package and the results obtained were consistent with literature work and experimental atmosphere.

Ignominy: a tool for software dependency and metric analysis with examples from large HEP packages

International Nuclear Information System (INIS)

Tuura, L.A.; Taylor, L.

2001-01-01

Ignominy is a tool developed in the CMS IGUANA project to analyse the structure of software systems. Its primary component is a dependency scanner that distills information into human-usable forms. It also includes several tools to visualise the collected data in the form of graphical views and numerical metrics. Ignominy was designed to adapt to almost any reasonable structure, and it has been used to analyse several large projects. The original purpose of Ignominy was to help us better ensure the quality of our own software, and in particular warn us about possible structural problems early on. As a part of this activity it is now used as a standard part of our release procedure. The authors also use it to evaluate and study the quality of external packages they plan to make use of. The authors describe what Ignominy can find out, and how it can be used to visualise and assess a software structure. The authors also discuss the inherent problems of the analysis as well as the different approaches to modularity the tool makes quite evident. The focus is the illustration of these issues through the analysis results for several sizable HEP software projects

Scilab software package for the study of dynamical systems

Science.gov (United States)

Bordeianu, C. C.; Beşliu, C.; Jipa, Al.; Felea, D.; Grossu, I. V.

2008-05-01

This work presents a new software package for the study of chaotic flows and maps. The codes were written using Scilab, a software package for numerical computations providing a powerful open computing environment for engineering and scientific applications. It was found that Scilab provides various functions for ordinary differential equation solving, Fast Fourier Transform, autocorrelation, and excellent 2D and 3D graphical capabilities. The chaotic behaviors of the nonlinear dynamics systems were analyzed using phase-space maps, autocorrelation functions, power spectra, Lyapunov exponents and Kolmogorov-Sinai entropy. Various well known examples are implemented, with the capability of the users inserting their own ODE. Program summaryProgram title: Chaos Catalogue identifier: AEAP_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEAP_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 885 No. of bytes in distributed program, including test data, etc.: 5925 Distribution format: tar.gz Programming language: Scilab 3.1.1 Computer: PC-compatible running Scilab on MS Windows or Linux Operating system: Windows XP, Linux RAM: below 100 Megabytes Classification: 6.2 Nature of problem: Any physical model containing linear or nonlinear ordinary differential equations (ODE). Solution method: Numerical solving of ordinary differential equations. The chaotic behavior of the nonlinear dynamical system is analyzed using Poincaré sections, phase-space maps, autocorrelation functions, power spectra, Lyapunov exponents and Kolmogorov-Sinai entropies. Restrictions: The package routines are normally able to handle ODE systems of high orders (up to order twelve and possibly higher), depending on the nature of the problem. Running time: 10 to 20 seconds for problems that do not

The SAVI Vulnerability Analysis Software Package

International Nuclear Information System (INIS)

Mc Aniff, R.J.; Paulus, W.K.; Key, B.; Simpkins, B.

1987-01-01

SAVI (Systematic Analysis of Vulnerability to Intrusion) is a new PC-based software package for modeling Physical Protection Systems (PPS). SAVI utilizes a path analysis approach based on the Adversary Sequence Diagram (ASD) methodology. A highly interactive interface allows the user to accurately model complex facilities, maintain a library of these models on disk, and calculate the most vulnerable paths through any facility. Recommendations are provided to help the user choose facility upgrades which should reduce identified path vulnerabilities. Pop-up windows throughout SAVI are used for the input and display of information. A menu at the top of the screen presents all options to the user. These options are further explained on a message line directly below the menu. A diagram on the screen graphically represents the current protection system model. All input is checked for errors, and data are presented in a logical and clear manner. Print utilities provide the user with hard copies of all information and calculated results

The software quality control for gamma spectrometry

International Nuclear Information System (INIS)

Monte, L.

1986-01-01

One of major problems with wich the quality control program of an environmental measurements laboratory is confronted is the evaluation of the performances of software packages for the analysis of gamma-ray spectra. A program of tests for evaluating the performances of the software package (SPECTRAN-F, Canberra Inc.) used by our laboratory is being carried out. In this first paper the results of a preliminary study concerning the evaluation of the performance of the doublet analysis routine are presented

ATK-ForceField: a new generation molecular dynamics software package

Science.gov (United States)

Schneider, Julian; Hamaekers, Jan; Chill, Samuel T.; Smidstrup, Søren; Bulin, Johannes; Thesen, Ralph; Blom, Anders; Stokbro, Kurt

2017-12-01

ATK-ForceField is a software package for atomistic simulations using classical interatomic potentials. It is implemented as a part of the Atomistix ToolKit (ATK), which is a Python programming environment that makes it easy to create and analyze both standard and highly customized simulations. This paper will focus on the atomic interaction potentials, molecular dynamics, and geometry optimization features of the software, however, many more advanced modeling features are available. The implementation details of these algorithms and their computational performance will be shown. We present three illustrative examples of the types of calculations that are possible with ATK-ForceField: modeling thermal transport properties in a silicon germanium crystal, vapor deposition of selenium molecules on a selenium surface, and a simulation of creep in a copper polycrystal.

Lenstronomy: Multi-purpose gravitational lens modeling software package

Science.gov (United States)

Birrer, Simon; Amara, Adam

2018-04-01

Lenstronomy is a multi-purpose open-source gravitational lens modeling python package. Lenstronomy reconstructs the lens mass and surface brightness distributions of strong lensing systems using forward modelling and supports a wide range of analytic lens and light models in arbitrary combination. The software is also able to reconstruct complex extended sources as well as point sources. Lenstronomy is flexible and numerically accurate, with a clear user interface that could be deployed across different platforms. Lenstronomy has been used to derive constraints on dark matter properties in strong lenses, measure the expansion history of the universe with time-delay cosmography, measure cosmic shear with Einstein rings, and decompose quasar and host galaxy light.

Package-based software development

NARCIS (Netherlands)

Jonge, de M.; Chroust, G.; Hofer, C.

2003-01-01

The main goal of component-based software engineering is to decrease development time and development costs of software systems, by reusing prefabricated building blocks. Here we focus on software reuse within the implementation of such component-based applications, and on the corresponding software

Using packaged software for solving two differential equation problems that arise in plasma physics

International Nuclear Information System (INIS)

Gaffney, P.W.

1980-01-01

Experience in using packaged numerical software for solving two related problems that arise in Plasma physics is described. These problems are (i) the solution of the reduced resistive MHD equations and (ii) the solution of the Grad-Shafranov equation

ImagePy: an open-source, Python-based and platform-independent software package for boimage analysis.

Science.gov (United States)

Wang, Anliang; Yan, Xiaolong; Wei, Zhijun

2018-04-27

This note presents the design of a scalable software package named ImagePy for analysing biological images. Our contribution is concentrated on facilitating extensibility and interoperability of the software through decoupling the data model from the user interface. Especially with assistance from the Python ecosystem, this software framework makes modern computer algorithms easier to be applied in bioimage analysis. ImagePy is free and open source software, with documentation and code available at https://github.com/Image-Py/imagepy under the BSD license. It has been tested on the Windows, Mac and Linux operating systems. wzjdlut@dlut.edu.cn or yxdragon@imagepy.org.

Evaluation of open source data mining software packages

Science.gov (United States)

Bonnie Ruefenacht; Greg Liknes; Andrew J. Lister; Haans Fisk; Dan Wendt

2009-01-01

Since 2001, the USDA Forest Service (USFS) has used classification and regression-tree technology to map USFS Forest Inventory and Analysis (FIA) biomass, forest type, forest type groups, and National Forest vegetation. This prior work used Cubist/See5 software for the analyses. The objective of this project, sponsored by the Remote Sensing Steering Committee (RSSC),...

VIPEX (Vital-area Identification Package EXpert) Software Verification and Validation

International Nuclear Information System (INIS)

Jung, Woo Sik; Suh, Jae Seung

2010-06-01

The purposes of this report are (1) to perform a Verification and Validation (V and V) test for the VIPEX(Vital-area Identification Package EXpert) software and (2) to improve a software quality through the V and V test. The VIPEX was developed in Korea Atomic Energy Research Institute (KAERI) for the Vital Area Identification (VAI) of nuclear power plants. The version of the VIPEX which was distributed is 3.2.0.0. The VIPEX was revised based on the first V and V test and the second V and V test was performed. We have performed the following tasks for the V and V test on Windows XP and VISTA operating systems: Ο Testing basic functions including fault tree editing Ο Testing all kind of functions Ο Research for update from Visual BASIC 6.0 to Visual BASIC 2008

Mirion--a software package for automatic processing of mass spectrometric images.

Science.gov (United States)

Paschke, C; Leisner, A; Hester, A; Maass, K; Guenther, S; Bouschen, W; Spengler, B

2013-08-01

Mass spectrometric imaging (MSI) techniques are of growing interest for the Life Sciences. In recent years, the development of new instruments employing ion sources that are tailored for spatial scanning allowed the acquisition of large data sets. A subsequent data processing, however, is still a bottleneck in the analytical process, as a manual data interpretation is impossible within a reasonable time frame. The transformation of mass spectrometric data into spatial distribution images of detected compounds turned out to be the most appropriate method to visualize the results of such scans, as humans are able to interpret images faster and easier than plain numbers. Image generation, thus, is a time-consuming and complex yet very efficient task. The free software package "Mirion," presented in this paper, allows the handling and analysis of data sets acquired by mass spectrometry imaging. Mirion can be used for image processing of MSI data obtained from many different sources, as it uses the HUPO-PSI-based standard data format imzML, which is implemented in the proprietary software of most of the mass spectrometer companies. Different graphical representations of the recorded data are available. Furthermore, automatic calculation and overlay of mass spectrometric images promotes direct comparison of different analytes for data evaluation. The program also includes tools for image processing and image analysis.

FRAMES Software System: Linking to the Statistical Package R

Energy Technology Data Exchange (ETDEWEB)

Castleton, Karl J.; Whelan, Gene; Hoopes, Bonnie L.

2006-12-11

This document provides requirements, design, data-file specifications, test plan, and Quality Assurance/Quality Control protocol for the linkage between the statistical package R and the Framework for Risk Analysis in Multimedia Environmental Systems (FRAMES) Versions 1.x and 2.0. The requirements identify the attributes of the system. The design describes how the system will be structured to meet those requirements. The specification presents the specific modifications to FRAMES to meet the requirements and design. The test plan confirms that the basic functionality listed in the requirements (black box testing) actually functions as designed, and QA/QC confirms that the software meets the client’s needs.

User’s Manual for the Simulation of Energy Consumption and Emissions from Rail Traffic Software Package

DEFF Research Database (Denmark)

Cordiero, Tiago M.; Lindgreen, Erik Bjørn Grønning; Sorenson, Spencer C

2005-01-01

The ARTEMIS rail emissions model was implemented in a Microsoft Excel software package that includes data from the GISCO database on railway traffic. This report is the user’s manual for the aforementioned software that includes information on how to run the program and an overview on how...... of Excel Macros (Visual Basic) and database sheets included in one Excel file...

Radiative transfer modeling through terrestrial atmosphere and ocean accounting for inelastic processes: Software package SCIATRAN

International Nuclear Information System (INIS)

Rozanov, V.V.; Dinter, T.; Rozanov, A.V.; Wolanin, A.; Bracher, A.; Burrows, J.P.

2017-01-01

SCIATRAN is a comprehensive software package which is designed to model radiative transfer processes in the terrestrial atmosphere and ocean in the spectral range from the ultraviolet to the thermal infrared (0.18–40 μm). It accounts for multiple scattering processes, polarization, thermal emission and ocean–atmosphere coupling. The main goal of this paper is to present a recently developed version of SCIATRAN which takes into account accurately inelastic radiative processes in both the atmosphere and the ocean. In the scalar version of the coupled ocean–atmosphere radiative transfer solver presented by Rozanov et al. we have implemented the simulation of the rotational Raman scattering, vibrational Raman scattering, chlorophyll and colored dissolved organic matter fluorescence. In this paper we discuss and explain the numerical methods used in SCIATRAN to solve the scalar radiative transfer equation including trans-spectral processes, and demonstrate how some selected radiative transfer problems are solved using the SCIATRAN package. In addition we present selected comparisons of SCIATRAN simulations with those published benchmark results, independent radiative transfer models, and various measurements from satellite, ground-based, and ship-borne instruments. The extended SCIATRAN software package along with a detailed User's Guide is made available for scientists and students, who are undertaking their own research typically at universities, via the web page of the Institute of Environmental Physics (IUP), University of Bremen: (http://www.iup.physik.uni-bremen.de). - Highlights: • A new version of the software package SCIATRAN is presented. • Inelastic scattering in water and atmosphere is implemented in SCIATRAN. • Raman scattering and fluorescence can be included in radiative transfer calculations. • Comparisons to other radiative transfer models show excellent agreement. • Comparisons to observations show consistent results.

visCOS: An R-package to evaluate model performance of hydrological models

Science.gov (United States)

Klotz, Daniel; Herrnegger, Mathew; Wesemann, Johannes; Schulz, Karsten

2016-04-01

The evaluation of model performance is a central part of (hydrological) modelling. Much attention has been given to the development of evaluation criteria and diagnostic frameworks. (Klemeš, 1986; Gupta et al., 2008; among many others). Nevertheless, many applications exist for which objective functions do not yet provide satisfying summaries. Thus, the necessity to visualize results arises in order to explore a wider range of model capacities, be it strengths or deficiencies. Visualizations are usually devised for specific projects and these efforts are often not distributed to a broader community (e.g. via open source software packages). Hence, the opportunity to explicitly discuss a state-of-the-art presentation technique is often missed. We therefore present a comprehensive R-package for evaluating model performance by visualizing and exploring different aspects of hydrological time-series. The presented package comprises a set of useful plots and visualization methods, which complement existing packages, such as hydroGOF (Zambrano-Bigiarini et al., 2012). It is derived from practical applications of the hydrological models COSERO and COSEROreg (Kling et al., 2014). visCOS, providing an interface in R, represents an easy-to-use software package for visualizing and assessing model performance and can be implemented in the process of model calibration or model development. The package provides functions to load hydrological data into R, clean the data, process, visualize, explore and finally save the results in a consistent way. Together with an interactive zoom function of the time series, an online calculation of the objective functions for variable time-windows is included. Common hydrological objective functions, such as the Nash-Sutcliffe Efficiency and the Kling-Gupta Efficiency, can also be evaluated and visualized in different ways for defined sub-periods like hydrological years or seasonal sections. Many hydrologists use long-term water-balances as a

Determination of stress-strain state of the wooden church log walls with software package

Directory of Open Access Journals (Sweden)

Chulkova Anastasia

2016-01-01

Full Text Available The restoration of architectural monuments is going on all over the world today. The main aim of restoration is the renewal of stable functioning of building constructions in normal state. In this article, we have tried to figure out with special software the bearing capacity of log cabins of the Church of Transfiguration on Kizhi island. As shown in research results, determination of stress-strain stage with software package is necessary for the bearing capacity computation as well as field tests.

Melanie II--a third-generation software package for analysis of two-dimensional electrophoresis images: I. Features and user interface.

Science.gov (United States)

Appel, R D; Palagi, P M; Walther, D; Vargas, J R; Sanchez, J C; Ravier, F; Pasquali, C; Hochstrasser, D F

1997-12-01

Although two-dimensional electrophoresis (2-DE) computer analysis software packages have existed ever since 2-DE technology was developed, it is only now that the hardware and software technology allows large-scale studies to be performed on low-cost personal computers or workstations, and that setting up a 2-DE computer analysis system in a small laboratory is no longer considered a luxury. After a first attempt in the seventies and early eighties to develop 2-DE analysis software systems on hardware that had poor or even no graphical capabilities, followed in the late eighties by a wave of innovative software developments that were possible thanks to new graphical interface standards such as XWindows, a third generation of 2-DE analysis software packages has now come to maturity. It can be run on a variety of low-cost, general-purpose personal computers, thus making the purchase of a 2-DE analysis system easily attainable for even the smallest laboratory that is involved in proteome research. Melanie II 2-D PAGE, developed at the University Hospital of Geneva, is such a third-generation software system for 2-DE analysis. Based on unique image processing algorithms, this user-friendly object-oriented software package runs on multiple platforms, including Unix, MS-Windows 95 and NT, and Power Macintosh. It provides efficient spot detection and quantitation, state-of-the-art image comparison, statistical data analysis facilities, and is Internet-ready. Linked to proteome databases such as those available on the World Wide Web, it represents a valuable tool for the "Virtual Lab" of the post-genome area.

Packaging Evaluation Approach to Improve Cosmetic Product Safety

OpenAIRE

Benedetta Briasco; Priscilla Capra; Arianna Cecilia Cozzi; Barbara Mannucci; Paola Perugini

2016-01-01

In the Regulation 1223/2009, evaluation of packaging has become mandatory to assure cosmetic product safety. In fact, the safety assessment of a cosmetic product can be successfully carried out only if the hazard deriving from the use of the designed packaging for the specific product is correctly evaluated. Despite the law requirement, there is too little information about the chemical-physical characteristics of finished packaging and the possible interactions between formulation and packag...

TENSOLVE: A software package for solving systems of nonlinear equations and nonlinear least squares problems using tensor methods

Energy Technology Data Exchange (ETDEWEB)

Bouaricha, A. [Argonne National Lab., IL (United States). Mathematics and Computer Science Div.; Schnabel, R.B. [Colorado Univ., Boulder, CO (United States). Dept. of Computer Science

1996-12-31

This paper describes a modular software package for solving systems of nonlinear equations and nonlinear least squares problems, using a new class of methods called tensor methods. It is intended for small to medium-sized problems, say with up to 100 equations and unknowns, in cases where it is reasonable to calculate the Jacobian matrix or approximate it by finite differences at each iteration. The software allows the user to select between a tensor method and a standard method based upon a linear model. The tensor method models F({ital x}) by a quadratic model, where the second-order term is chosen so that the model is hardly more expensive to form, store, or solve than the standard linear model. Moreover, the software provides two different global strategies, a line search and a two- dimensional trust region approach. Test results indicate that, in general, tensor methods are significantly more efficient and robust than standard methods on small and medium-sized problems in iterations and function evaluations.

The EQ3/6 software package for geochemical modeling: Current status

International Nuclear Information System (INIS)

Worlery, T.J.; Jackson, K.J.; Bourcier, W.L.; Bruton, C.J.; Viani, B.E.; Knauss, K.G.; Delany, J.M.

1988-07-01

EQ3/6 is a software package for modeling chemical and mineralogic interactions in aqueous geochemical systems. The major components of the package are EQ3NR (a speciation-solubility code), EQ6 (a reaction path code), EQLIB (a supporting library), and a supporting thermodynamic data base. EQ3NR calculates aqueous speciation and saturation indices from analytical data. It can also be used to calculate compositions of buffer solutions for use in laboratory experiments. EQ6 computes reaction path models of both equilibrium step processes and kinetic reaction processes. These models can be computed for closed systems and relatively simple open systems. EQ3/6 is useful in making purely theoretical calculations, in designing, interpreting, and extrapolating laboratory experiments, and in testing and developing submodels and supporting data used in these codes. The thermodynamic data base supports calculations over the range 0-300 degree C. 60 refs., 2 figs

The EQ3/6 software package for geochemical modeling: Current status

Energy Technology Data Exchange (ETDEWEB)

Wolery, T.J.; Jackson, K.J.; Bourcier, W.L.; Bruton, C.J.; Viani, B.E.; Knauss, K.G.; Delany, J.M.

1988-07-01

EQ3/6 is a software package for modeling chemical and mineralogic interactions in aqueous geochemical systems. The major components of the package are EQ3NR (a speciation-solubility code), EQ6 (a reaction path code), EQLIB (a supporting library), and a supporting thermodynamic data base. EQ3NR calculates aqueous speciation and saturation indices from analytical data. It can also be used to calculate compositions of buffer solutions for use in laboratory experiments. EQ6 computes reaction path models of both equilibrium step processes and kinetic reaction processes. These models can be computed for closed systems and relatively simple open systems. EQ3/6 is useful in making purely theoretical calculations, in designing, interpreting, and extrapolating laboratory experiments, and in testing and developing submodels and supporting data used in these codes. The thermodynamic data base supports calculations over the range 0-300{degree}C. 60 refs., 2 figs.

Software component quality evaluation

Science.gov (United States)

Clough, A. J.

1991-01-01

The paper describes a software inspection process that can be used to evaluate the quality of software components. Quality criteria, process application, independent testing of the process and proposed associated tool support are covered. Early results indicate that this technique is well suited for assessing software component quality in a standardized fashion. With automated machine assistance to facilitate both the evaluation and selection of software components, such a technique should promote effective reuse of software components.

ldr: An R Software Package for Likelihood-Based Su?cient Dimension Reduction

Directory of Open Access Journals (Sweden)

Kofi Placid Adragni

2014-11-01

Full Text Available In regression settings, a su?cient dimension reduction (SDR method seeks the core information in a p-vector predictor that completely captures its relationship with a response. The reduced predictor may reside in a lower dimension d < p, improving ability to visualize data and predict future observations, and mitigating dimensionality issues when carrying out further analysis. We introduce ldr, a new R software package that implements three recently proposed likelihood-based methods for SDR: covariance reduction, likelihood acquired directions, and principal fitted components. All three methods reduce the dimensionality of the data by pro jection into lower dimensional subspaces. The package also implements a variable screening method built upon principal ?tted components which makes use of ?exible basis functions to capture the dependencies between the predictors and the response. Examples are given to demonstrate likelihood-based SDR analyses using ldr, including estimation of the dimension of reduction subspaces and selection of basis functions. The ldr package provides a framework that we hope to grow into a comprehensive library of likelihood-based SDR methodologies.

Evaluation of probabilistic forecasts with the scoringRules package

Science.gov (United States)

Jordan, Alexander; Krüger, Fabian; Lerch, Sebastian

2017-04-01

Over the last decades probabilistic forecasts in the form of predictive distributions have become popular in many scientific disciplines. With the proliferation of probabilistic models arises the need for decision-theoretically principled tools to evaluate the appropriateness of models and forecasts in a generalized way in order to better understand sources of prediction errors and to improve the models. Proper scoring rules are functions S(F,y) which evaluate the accuracy of a forecast distribution F , given that an outcome y was observed. In coherence with decision-theoretical principles they allow to compare alternative models, a crucial ability given the variety of theories, data sources and statistical specifications that is available in many situations. This contribution presents the software package scoringRules for the statistical programming language R, which provides functions to compute popular scoring rules such as the continuous ranked probability score for a variety of distributions F that come up in applied work. For univariate variables, two main classes are parametric distributions like normal, t, or gamma distributions, and distributions that are not known analytically, but are indirectly described through a sample of simulation draws. For example, ensemble weather forecasts take this form. The scoringRules package aims to be a convenient dictionary-like reference for computing scoring rules. We offer state of the art implementations of several known (but not routinely applied) formulas, and implement closed-form expressions that were previously unavailable. Whenever more than one implementation variant exists, we offer statistically principled default choices. Recent developments include the addition of scoring rules to evaluate multivariate forecast distributions. The use of the scoringRules package is illustrated in an example on post-processing ensemble forecasts of temperature.

METEOR v1.0 - Design and structure of the software package; METEOR v1.0 - Estructura y modulos informaticos

Energy Technology Data Exchange (ETDEWEB)

Palomo, E.

1994-07-01

This script describes the structure and the separated modules of the software package METEOR for the statistical analysis of meteorological data series. It contains a systematic description of the subroutines of METEOR and, also, of the required shape for input and output files. The original version of METEOR have been developed by Ph.D. Elena Palomo, CIEMAT-IER, GIMASE. It is built by linking programs and routines written in FORTRAN 77 and it adds thc graphical capabilities of GNUPLOT. The shape of this toolbox was designed following the criteria of modularity, flexibility and agility criteria. All the input, output and analysis options are structured in three main menus: i) the first is aimed to evaluate the quality of the data set; ii) the second is aimed for pre-processing of the data; and iii) the third is aimed towards the statistical analyses and for creating the graphical outputs. Actually the information about METEOR is constituted by three documents written in spanish: 1) METEOR v1.0: User's guide; 2) METEOR v1.0: A usage example; 3) METEOR v 1.0: Design and structure of the software package. (Author)

Comparative exploration of multidimensional flow cytometry software: a model approach evaluating T cell polyfunctional behavior.

Science.gov (United States)

Spear, Timothy T; Nishimura, Michael I; Simms, Patricia E

2017-08-01

Advancement in flow cytometry reagents and instrumentation has allowed for simultaneous analysis of large numbers of lineage/functional immune cell markers. Highly complex datasets generated by polychromatic flow cytometry require proper analytical software to answer investigators' questions. A problem among many investigators and flow cytometry Shared Resource Laboratories (SRLs), including our own, is a lack of access to a flow cytometry-knowledgeable bioinformatics team, making it difficult to learn and choose appropriate analysis tool(s). Here, we comparatively assess various multidimensional flow cytometry software packages for their ability to answer a specific biologic question and provide graphical representation output suitable for publication, as well as their ease of use and cost. We assessed polyfunctional potential of TCR-transduced T cells, serving as a model evaluation, using multidimensional flow cytometry to analyze 6 intracellular cytokines and degranulation on a per-cell basis. Analysis of 7 parameters resulted in 128 possible combinations of positivity/negativity, far too complex for basic flow cytometry software to analyze fully. Various software packages were used, analysis methods used in each described, and representative output displayed. Of the tools investigated, automated classification of cellular expression by nonlinear stochastic embedding (ACCENSE) and coupled analysis in Pestle/simplified presentation of incredibly complex evaluations (SPICE) provided the most user-friendly manipulations and readable output, evaluating effects of altered antigen-specific stimulation on T cell polyfunctionality. This detailed approach may serve as a model for other investigators/SRLs in selecting the most appropriate software to analyze complex flow cytometry datasets. Further development and awareness of available tools will help guide proper data analysis to answer difficult biologic questions arising from incredibly complex datasets. © Society

Software Packages to Support Electrical Engineering Virtual Lab

Directory of Open Access Journals (Sweden)

Manuel Travassos Valdez

2012-03-01

Full Text Available The use of Virtual Reality Systems (VRS, as a learning aid, encourages the creation of tools that allow users/students to simulate educational environments on a computer. This article presents a way of building a VRS system with Software Packages to support Electrical Engineering Virtual Laboratories to be used in a near future in the teaching of the curriculum unit of Circuit Theory. The steps required for the construction of a project are presented in this paper. The simulation is still under construction and intends to use a three-dimensional virtual environment laboratory electric measurement, which will allow users/students to experiment and test the modeled equipment. Therefore, there are still no links available for further examination. The result may demonstrate the future potential of applications of Virtual Reality Systems as an efficient and cost-effective learning system.

GUM2DFT—a software tool for uncertainty evaluation of transient signals in the frequency domain

International Nuclear Information System (INIS)

Eichstädt, S; Wilkens, V

2016-01-01

The Fourier transform and its counterpart for discrete time signals, the discrete Fourier transform (DFT), are common tools in measurement science and application. Although almost every scientific software package offers ready-to-use implementations of the DFT, the propagation of uncertainties in line with the guide to the expression of uncertainty in measurement (GUM) is typically neglected. This is of particular importance in dynamic metrology, when input estimation is carried out by deconvolution in the frequency domain. To this end, we present the new open-source software tool GUM2DFT, which utilizes closed formulas for the efficient propagation of uncertainties for the application of the DFT, inverse DFT and input estimation in the frequency domain. It handles different frequency domain representations, accounts for autocorrelation and takes advantage of the symmetry inherent in the DFT result for real-valued time domain signals. All tools are presented in terms of examples which form part of the software package. GUM2DFT will foster GUM-compliant evaluation of uncertainty in a DFT-based analysis and enable metrologists to include uncertainty evaluations in their routine work. (paper)

Efficient Calculation of Exact Exchange Within the Quantum Espresso Software Package

Science.gov (United States)

Barnes, Taylor; Kurth, Thorsten; Carrier, Pierre; Wichmann, Nathan; Prendergast, David; Kent, Paul; Deslippe, Jack

Accurate simulation of condensed matter at the nanoscale requires careful treatment of the exchange interaction between electrons. In the context of plane-wave DFT, these interactions are typically represented through the use of approximate functionals. Greater accuracy can often be obtained through the use of functionals that incorporate some fraction of exact exchange; however, evaluation of the exact exchange potential is often prohibitively expensive. We present an improved algorithm for the parallel computation of exact exchange in Quantum Espresso, an open-source software package for plane-wave DFT simulation. Through the use of aggressive load balancing and on-the-fly transformation of internal data structures, our code exhibits speedups of approximately an order of magnitude for practical calculations. Additional optimizations are presented targeting the many-core Intel Xeon-Phi ``Knights Landing'' architecture, which largely powers NERSC's new Cori system. We demonstrate the successful application of the code to difficult problems, including simulation of water at a platinum interface and computation of the X-ray absorption spectra of transition metal oxides.

GENES - a software package for analysis in experimental statistics and quantitative genetics

Directory of Open Access Journals (Sweden)

Cosme Damião Cruz

2013-06-01

Full Text Available GENES is a software package used for data analysis and processing with different biometricmodels and is essential in genetic studies applied to plant and animal breeding. It allows parameterestimation to analyze biologicalphenomena and is fundamental for the decision-making process andpredictions of success and viability of selection strategies. The program can be downloaded from theInternet (http://www.ufv.br/dbg/genes/genes.htm orhttp://www.ufv.br/dbg/biodata.htm and is available inPortuguese, English and Spanish. Specific literature (http://www.livraria.ufv.br/ and a set of sample filesare also provided, making GENES easy to use. The software is integrated into the programs MS Word, MSExcel and Paint, ensuring simplicity and effectiveness indata import and export ofresults, figures and data.It is also compatible with the free software R and Matlab, through the supply of useful scripts available forcomplementary analyses in different areas, including genome wide selection, prediction of breeding valuesand use of neural networks in genetic improvement.

SeDA: A software package for the statistical analysis of the instrument drift

International Nuclear Information System (INIS)

Lee, H. J.; Jang, S. C.; Lim, T. J.

2006-01-01

The setpoints for safety-related equipment are affected by many sources of an uncertainty. ANSI/ISA-S67.04.01-2000 [1] and ISA-RP6 7.04.02-2000 [2] suggested the statistical approaches for ensuring that the safety-related instrument setpoints were established and maintained within the technical specification limits [3]. However, Jang et al. [4] indicated that the preceding methodologies for a setpoint drift analysis might be insufficient to manage a setpoint drift on an instrumentation device and proposed new statistical analysis procedures for the management of a setpoint drift, based on the plant specific as-found/as-left data. Although IHPA (Instrument History Performance Analysis) is a widely known commercial software package to analyze an instrument setpoint drift, several steps in the new procedure cannot be performed by using it because it is based on the statistical approaches suggested in the ANSI/ISA-S67.04.01 -2000 [1] and ISA-RP67.04.02-2000 [2], In this paper we present a software package (SeDA: Setpoint Drift Analysis) that implements new methodologies, and which is easy to use, as it is accompanied by powerful graphical tools. (authors)

EQ3/6, a software package for geochemical modeling of aqueous systems: Package overview and installation guide (Version 7.0)

International Nuclear Information System (INIS)

Wolery, T.J.

1992-01-01

EQ3/6 is a software package for geochemical modeling of aqueous systems. This report describes version 7.0. The major components of the package include: EQ3NR, a speciation-solubility code; EQ6, a reaction path code which models water/rock interaction or fluid mixing in either a pure reaction progress mode or a time mode; EQPT, a data file preprocessor, EQLIB, a supporting software library; and five supporting thermodynamic data files. The software deals with the concepts of thermodynamic equilibrium, thermodynamic disequilibrium, and reaction kinetics. The five supporting data files contain both standard state and activity coefficient-related data. Three support the use of the Davies or B equations for the activity coefficients; the other two support the use of Pitzer's equations. The temperature range of the thermodynamic data on the data files varies from 25 degree C only to 0--300 degree C. EQPT takes a formatted data file (a data0 file) and writes an unformatted near-equivalent called a datal file, which is actually the form read by EQ3NR and EQ6. EQ3NR is useful for analyzing groundwater chemistry data, calculating solubility limits, and determining whether certain reactions are in states of partial equilibrium or disequilibrium. It is also required to initialize an EQ6 calculation. EQ6 models the consequences of reacting an aqueous solution with a set of reactants which react irreversibly. It can also model fluid mixing and the consequences of changes in temperature. This code operates both in a pure reaction progress frame and in a time frame

Development of an engine system simulation software package - ESIM

Energy Technology Data Exchange (ETDEWEB)

Erlandsson, Olof

2000-10-01

A software package, ESIM is developed for simulating internal combustion engine systems, including models for engine, manifolds, turbocharger, charge-air cooler (inter cooler) and inlet air heater. This study focus on the thermodynamic treatment and methods used in the models. It also includes some examples of system simulations made with these models for validation purposes. The engine model can be classified as a zero-dimensional, single zone model. It includes calculation of the valve flow process, models for heat release and models for in-cylinder, exhaust port and manifold heat transfer. Models are developed for handling turbocharger performance and charge air cooler characteristics. The main purpose of the project related to this work is to use the ESIM software to study heat balance and performance of homogeneous charge compression ignition (HCCI) engine systems. A short description of the HCCI engine is therefore included, pointing out the difficulties, or challenges regarding the HCCI engine, from a system perspective. However, the relations given here, and the code itself, is quite general, making it possible to use these models to simulate spark ignited, as well as direct injected engines.

The Computer-based Health Evaluation Software (CHES: a software for electronic patient-reported outcome monitoring

Directory of Open Access Journals (Sweden)

Holzner Bernhard

2012-11-01

Full Text Available Abstract Background Patient-reported Outcomes (PROs capturing e.g., quality of life, fatigue, depression, medication side-effects or disease symptoms, have become important outcome parameters in medical research and daily clinical practice. Electronic PRO data capture (ePRO with software packages to administer questionnaires, storing data, and presenting results has facilitated PRO assessment in hospital settings. Compared to conventional paper-pencil versions of PRO instruments, ePRO is more economical with regard to staff resources and time, and allows immediate presentation of results to the medical staff. The objective of our project was to develop software (CHES – Computer-based Health Evaluation System for ePRO in hospital settings and at home with a special focus on the presentation of individual patient’s results. Methods Following the Extreme Programming development approach architecture was not fixed up-front, but was done in close, continuous collaboration with software end users (medical staff, researchers and patients to meet their specific demands. Developed features include sophisticated, longitudinal charts linking patients’ PRO data to clinical characteristics and to PRO scores from reference populations, a web-interface for questionnaire administration, and a tool for convenient creating and editing of questionnaires. Results By 2012 CHES has been implemented at various institutions in Austria, Germany, Switzerland, and the UK and about 5000 patients participated in ePRO (with around 15000 assessments in total. Data entry is done by the patients themselves via tablet PCs with a study nurse or an intern approaching patients and supervising questionnaire completion. Discussion During the last decade several software packages for ePRO have emerged for different purposes. Whereas commercial products are available primarily for ePRO in clinical trials, academic projects have focused on data collection and presentation in daily

In-depth evaluation of software tools for data-independent acquisition based label-free quantification.

Science.gov (United States)

Kuharev, Jörg; Navarro, Pedro; Distler, Ute; Jahn, Olaf; Tenzer, Stefan

2015-09-01

Label-free quantification (LFQ) based on data-independent acquisition workflows currently experiences increasing popularity. Several software tools have been recently published or are commercially available. The present study focuses on the evaluation of three different software packages (Progenesis, synapter, and ISOQuant) supporting ion mobility enhanced data-independent acquisition data. In order to benchmark the LFQ performance of the different tools, we generated two hybrid proteome samples of defined quantitative composition containing tryptically digested proteomes of three different species (mouse, yeast, Escherichia coli). This model dataset simulates complex biological samples containing large numbers of both unregulated (background) proteins as well as up- and downregulated proteins with exactly known ratios between samples. We determined the number and dynamic range of quantifiable proteins and analyzed the influence of applied algorithms (retention time alignment, clustering, normalization, etc.) on quantification results. Analysis of technical reproducibility revealed median coefficients of variation of reported protein abundances below 5% for MS(E) data for Progenesis and ISOQuant. Regarding accuracy of LFQ, evaluation with synapter and ISOQuant yielded superior results compared to Progenesis. In addition, we discuss reporting formats and user friendliness of the software packages. The data generated in this study have been deposited to the ProteomeXchange Consortium with identifier PXD001240 (http://proteomecentral.proteomexchange.org/dataset/PXD001240). © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A NEW EXHAUST VENTILATION SYSTEM DESIGN SOFTWARE

Directory of Open Access Journals (Sweden)

H. Asilian Mahabady

2007-09-01

Full Text Available A Microsoft Windows based ventilation software package is developed to reduce time-consuming and boring procedure of exhaust ventilation system design. This program Assure accurate and reliable air pollution control related calculations. Herein, package is tentatively named Exhaust Ventilation Design Software which is developed in VB6 programming environment. Most important features of Exhaust Ventilation Design Software that are ignored in formerly developed packages are Collector design and fan dimension data calculations. Automatic system balance is another feature of this package. Exhaust Ventilation Design Software algorithm for design is based on two methods: Balance by design (Static pressure balance and design by Blast gate. The most important section of software is a spreadsheet that is designed based on American Conference of Governmental Industrial Hygienists calculation sheets. Exhaust Ventilation Design Software is developed so that engineers familiar with American Conference of Governmental Industrial Hygienists datasheet can easily employ it for ventilation systems design. Other sections include Collector design section (settling chamber, cyclone, and packed tower, fan geometry and dimension data section, a unit converter section (that helps engineers to deal with units, a hood design section and a Persian HTML help. Psychometric correction is also considered in Exhaust Ventilation Design Software. In Exhaust Ventilation Design Software design process, efforts are focused on improving GUI (graphical user interface and use of programming standards in software design. Reliability of software has been evaluated and results show acceptable accuracy.

PHYLUCE is a software package for the analysis of conserved genomic loci.

Science.gov (United States)

Faircloth, Brant C

2016-03-01

Targeted enrichment of conserved and ultraconserved genomic elements allows universal collection of phylogenomic data from hundreds of species at multiple time scales ( 300 Ma). Prior to downstream inference, data from these types of targeted enrichment studies must undergo preprocessing to assemble contigs from sequence data; identify targeted, enriched loci from the off-target background data; align enriched contigs representing conserved loci to one another; and prepare and manipulate these alignments for subsequent phylogenomic inference. PHYLUCE is an efficient and easy-to-install software package that accomplishes these tasks across hundreds of taxa and thousands of enriched loci. PHYLUCE is written for Python 2.7. PHYLUCE is supported on OSX and Linux (RedHat/CentOS) operating systems. PHYLUCE source code is distributed under a BSD-style license from https://www.github.com/faircloth-lab/phyluce/ PHYLUCE is also available as a package (https://binstar.org/faircloth-lab/phyluce) for the Anaconda Python distribution that installs all dependencies, and users can request a PHYLUCE instance on iPlant Atmosphere (tag: phyluce). The software manual and a tutorial are available from http://phyluce.readthedocs.org/en/latest/ and test data are available from doi: 10.6084/m9.figshare.1284521. brant@faircloth-lab.org Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

LipiDex: An Integrated Software Package for High-Confidence Lipid Identification.

Science.gov (United States)

Hutchins, Paul D; Russell, Jason D; Coon, Joshua J

2018-04-17

State-of-the-art proteomics software routinely quantifies thousands of peptides per experiment with minimal need for manual validation or processing of data. For the emerging field of discovery lipidomics via liquid chromatography-tandem mass spectrometry (LC-MS/MS), comparably mature informatics tools do not exist. Here, we introduce LipiDex, a freely available software suite that unifies and automates all stages of lipid identification, reducing hands-on processing time from hours to minutes for even the most expansive datasets. LipiDex utilizes flexible in silico fragmentation templates and lipid-optimized MS/MS spectral matching routines to confidently identify and track hundreds of lipid species and unknown compounds from diverse sample matrices. Unique spectral and chromatographic peak purity algorithms accurately quantify co-isolation and co-elution of isobaric lipids, generating identifications that match the structural resolution afforded by the LC-MS/MS experiment. During final data filtering, ionization artifacts are removed to significantly reduce dataset redundancy. LipiDex interfaces with several LC-MS/MS software packages, enabling robust lipid identification to be readily incorporated into pre-existing data workflows. Copyright © 2018 Elsevier Inc. All rights reserved.

Calculation Software versus Illustration Software for Teaching Statistics

DEFF Research Database (Denmark)

Mortensen, Peter Stendahl; Boyle, Robin G.

1999-01-01

As personal computers have become more and more powerful, so have the software packages available to us for teaching statistics. This paper investigates what software packages are currently being used by progressive statistics instructors at university level, examines some of the deficiencies...... of such software, and indicates features that statistics instructors wish to have incorporated in software in the future. The basis of the paper is a survey of participants at ICOTS-5 (the Fifth International Conference on Teaching Statistics). These survey results, combined with the software based papers...

Guidelines for the verification and validation of expert system software and conventional software: Rationale and description of V ampersand V guideline packages and procedures. Volume 5

International Nuclear Information System (INIS)

Mirsky, S.M.; Hayes, J.E.; Miller, L.A.

1995-03-01

This report is the fifth volume in a series of reports describing the results of the Expert System Verification C, and Validation (V ampersand V) project which is jointly funded by the U.S. Nuclear Regulatory Commission and the Electric Power Research Institute toward the objective of formulating Guidelines for the V ampersand V of expert systems for use in nuclear power applications. This report provides the rationale for and description of those guidelines. The actual guidelines themselves are presented in Volume 7, open-quotes User's Manual.close quotes Three factors determine what V ampersand V is needed: (1) the stage of the development life cycle (requirements, design, or implementation); (2) whether the overall system or a specialized component needs to be tested (knowledge base component, inference engine or other highly reusable element, or a component involving conventional software); and (3) the stringency of V ampersand V that is needed (as judged from an assessment of the system's complexity and the requirement for its integrity to form three Classes). A V ampersand V Guideline package is provided for each of the combinations of these three variables. The package specifies the V ampersand V methods recommended and the order in which they should be administered, the assurances each method provides, the qualifications needed by the V ampersand V team to employ each particular method, the degree to which the methods should be applied, the performance measures that should be taken, and the decision criteria for accepting, conditionally accepting, or rejecting an evaluated system. In addition to the Guideline packages, highly detailed step-by-step procedures are provided for 11 of the more important methods, to ensure that they can be implemented correctly. The Guidelines can apply to conventional procedural software systems as well as all kinds of Al systems

EQ3/6, a software package for geochemical modeling of aqueous systems: Package overview and installation guide (Version 7.0)

Energy Technology Data Exchange (ETDEWEB)

Wolery, T.J.

1992-09-14

EQ3/6 is a software package for geochemical modeling of aqueous systems. This report describes version 7.0. The major components of the package include: EQ3NR, a speciation-solubility code; EQ6, a reaction path code which models water/rock interaction or fluid mixing in either a pure reaction progress mode or a time mode; EQPT, a data file preprocessor, EQLIB, a supporting software library; and five supporting thermodynamic data files. The software deals with the concepts of thermodynamic equilibrium, thermodynamic disequilibrium, and reaction kinetics. The five supporting data files contain both standard state and activity coefficient-related data. Three support the use of the Davies or B-dot equations for the activity coefficients; the other two support the use of Pitzer`s equations. The temperature range of the thermodynamic data on the data files varies from 25{degree}C only to 0--300{degree}C. EQPT takes a formatted data file (a data0 file) and writes an unformatted near-equivalent called a datal file, which is actually the form read by EQ3NR and EQ6. EQ3NR is useful for analyzing groundwater chemistry data, calculating solubility limits, and determining whether certain reactions are in states of partial equilibrium or disequilibrium. It is also required to initialize an EQ6 calculation. EQ6 models the consequences of reacting an aqueous solution with a set of reactants which react irreversibly. It can also model fluid mixing and the consequences of changes in temperature. This code operates both in a pure reaction progress frame and in a time frame.

PCG: A software package for the iterative solution of linear systems on scalar, vector and parallel computers

Energy Technology Data Exchange (ETDEWEB)

Joubert, W. [Los Alamos National Lab., NM (United States); Carey, G.F. [Univ. of Texas, Austin, TX (United States)

1994-12-31

A great need exists for high performance numerical software libraries transportable across parallel machines. This talk concerns the PCG package, which solves systems of linear equations by iterative methods on parallel computers. The features of the package are discussed, as well as techniques used to obtain high performance as well as transportability across architectures. Representative numerical results are presented for several machines including the Connection Machine CM-5, Intel Paragon and Cray T3D parallel computers.

Evaluation of finite element codes for demonstrating the performance of radioactive material packages in hypothetical accident drop scenarios

International Nuclear Information System (INIS)

Tso, C.F.; Hueggenberg, R.

2004-01-01

Drop testing and analysis are the two methods for demonstrating the performance of packages in hypothetical drop accident scenarios. The exact purpose of the tests and the analyses, and the relative prominence of the two in the license application, may depend on the Competent Authority and will vary between countries. The Finite Element Method (FEM) is a powerful analysis tool. A reliable finite element (FE) code when used correctly and appropriately, will allow a package's behaviour to be simulated reliably. With improvements in computing power, and in sophistication and reliability of FE codes, it is likely that FEM calculations will increasingly be used as evidence of drop test performance when seeking Competent Authority approval. What is lacking at the moment, however, is a standardised method of assessing a FE code in order to determine whether it is sufficiently reliable or pessimistic. To this end, the project Evaluation of Codes for Analysing the Drop Test Performance of Radioactive Material Transport Containers, funded by the European Commission Directorate-General XVII (now Directorate-General for Energy and Transport) and jointly performed by Arup and Gesellschaft fuer Nuklear-Behaelter mbH, was carried out in 1998. The work consisted of three components: Survey of existing finite element software, with a view to finding codes that may be capable of analysing drop test performance of radioactive material packages, and to produce an inventory of them. Develop a set of benchmark problems to evaluate software used for analysing the drop test performance of packages. Evaluate the finite element codes by testing them against the benchmarks This paper presents a summary of this work

Evaluation of finite element codes for demonstrating the performance of radioactive material packages in hypothetical accident drop scenarios

Energy Technology Data Exchange (ETDEWEB)

Tso, C.F. [Arup (United Kingdom); Hueggenberg, R. [Gesellschaft fuer Nuklear-Behaelter mbH (Germany)

2004-07-01

Drop testing and analysis are the two methods for demonstrating the performance of packages in hypothetical drop accident scenarios. The exact purpose of the tests and the analyses, and the relative prominence of the two in the license application, may depend on the Competent Authority and will vary between countries. The Finite Element Method (FEM) is a powerful analysis tool. A reliable finite element (FE) code when used correctly and appropriately, will allow a package's behaviour to be simulated reliably. With improvements in computing power, and in sophistication and reliability of FE codes, it is likely that FEM calculations will increasingly be used as evidence of drop test performance when seeking Competent Authority approval. What is lacking at the moment, however, is a standardised method of assessing a FE code in order to determine whether it is sufficiently reliable or pessimistic. To this end, the project Evaluation of Codes for Analysing the Drop Test Performance of Radioactive Material Transport Containers, funded by the European Commission Directorate-General XVII (now Directorate-General for Energy and Transport) and jointly performed by Arup and Gesellschaft fuer Nuklear-Behaelter mbH, was carried out in 1998. The work consisted of three components: Survey of existing finite element software, with a view to finding codes that may be capable of analysing drop test performance of radioactive material packages, and to produce an inventory of them. Develop a set of benchmark problems to evaluate software used for analysing the drop test performance of packages. Evaluate the finite element codes by testing them against the benchmarks This paper presents a summary of this work.

Advances in the development of the PIXEKLM-TPI software package

International Nuclear Information System (INIS)

Uzonyi, I.; Szabo, Gy.

2005-01-01

Complete text of publication follows. During the past decade great effort has been devoted to the developments of various local analytical methods which are capable to analyze small volumes of a sample (in the range of some μm 3 ) by high lateral and/or depth resolution. Among the Ion Beam Analytical (IBA) methods, Particle Induced X-Ray Fluorescence Emission (PIXE) analysis has been used for qualitative elemental imaging for a long time. Nevertheless, production of quantitative images is still a challenging and unresolved problem in general. Ryan and his co-workers were the first who developed a software package (GeoPIXE) for on-line quantitative mapping which is capable to analyze especially thick samples. Some years ago we also started to develop quantitative PIXE imaging software and suggested a different approach for the compensation of matrix effects and sample thickness. It is based on the rapid matrix transform method called Dynamic Analysis which directly converts the spectrum vector (S) into the concentration vector (C) in terms of the matrix Γ. We modified the earlier version of the PIXEKLM program in order to calculate the Γ matrix for materials of any thickness. Furthermore, we have developed a windows-based program (True PIXE Imaging, TPI) which calculates elemental distributions on a pixel by pixel basis and creates so called elemental images from them in bit map form using colour bars. The basic part of the new program package was published in 2005. During the past year much efforts has been devoted to develop various new options such as visualization of spectrum components in order to make the program more user-friendly and applicable. In the figure below the decomposed PIXE spectrum of an industrial material is visualized. (author)

REIDAC. A software package for retrospective dose assessment in internal contamination with radionuclides

International Nuclear Information System (INIS)

Kurihara, Osamu; Kanai, Katsuta; Takada, Chie; Takasaki, Koji; Ito, Kimio; Momose, Takumaro; Hato, Shinji; Ikeda, Hiroshi; Oeda, Mikihiro; Kurosawa, Naohiro; Fukutsu, Kumiko; Yamada, Yuji; Akashi, Makoto

2007-01-01

For cases of internal contamination with radionuclides, it is necessary to perform an internal dose assessment to facilitate radiation protection. For this purpose, the ICRP has supplied the dose coefficients and the retention and excretion rates for various radionuclides. However, these dosimetric quantities are calculated under typical conditions and are not necessarily detailed enough for dose assessment situations in which specific information on the incident or/and individual biokinetic characteristics could or should be taken into account retrospectively. This paper describes a newly developed PC-based software package called Retrospective Internal Dose Assessment Code (REIDAC) that meets the needs of retrospective dose assessment. REIDAC is made up of a series of calculation programs and a package of software. The former calculates the dosimetric quantities for any radionuclide being assessed and the latter provides a user with the graphical user interface (GUI) for executing the programs, editing parameter values and displaying results. The accuracy of REIDAC was verified by comparisons with dosimetric quantities given in the ICRP publications. This paper presents the basic structure of REIDAC and its calculation methods. Sensitivity analysis of the aerosol size for 239 Pu compounds and provisional calculations for wound contamination with 241 Am were performed as examples of the practical application of REIDAC. (author)

Packaging Evaluation Approach to Improve Cosmetic Product Safety

Directory of Open Access Journals (Sweden)

Benedetta Briasco

2016-09-01

Full Text Available In the Regulation 1223/2009, evaluation of packaging has become mandatory to assure cosmetic product safety. In fact, the safety assessment of a cosmetic product can be successfully carried out only if the hazard deriving from the use of the designed packaging for the specific product is correctly evaluated. Despite the law requirement, there is too little information about the chemical-physical characteristics of finished packaging and the possible interactions between formulation and packaging; furthermore, different from food packaging, the cosmetic packaging is not regulated and, to date, appropriate guidelines are still missing. The aim of this work was to propose a practical approach to investigate commercial polymeric containers used in cosmetic field, especially through mechanical properties’ evaluation, from a safety point of view. First of all, it is essential to obtain complete information about raw materials. Subsequently, using an appropriate full factorial experimental design, it is possible to investigate the variables, like polymeric density, treatment, or type of formulation involved in changes to packaging properties or in formulation-packaging interaction. The variation of these properties can greatly affect cosmetic safety. In particular, mechanical properties can be used as an indicator of pack performances and safety. As an example, containers made of two types of polyethylene with different density, low-density polyethylene (LDPE and high-density polyethylene (HDPE, are investigated. Regarding the substances potentially extractable from the packaging, in this work the headspace solid-phase microextraction method (HSSPME was used because this technique was reported in the literature as suitable to detect extractables from the polymeric material here employed.

An open-source software package for multivariate modeling and clustering: applications to air quality management.

Science.gov (United States)

Wang, Xiuquan; Huang, Guohe; Zhao, Shan; Guo, Junhong

2015-09-01

This paper presents an open-source software package, rSCA, which is developed based upon a stepwise cluster analysis method and serves as a statistical tool for modeling the relationships between multiple dependent and independent variables. The rSCA package is efficient in dealing with both continuous and discrete variables, as well as nonlinear relationships between the variables. It divides the sample sets of dependent variables into different subsets (or subclusters) through a series of cutting and merging operations based upon the theory of multivariate analysis of variance (MANOVA). The modeling results are given by a cluster tree, which includes both intermediate and leaf subclusters as well as the flow paths from the root of the tree to each leaf subcluster specified by a series of cutting and merging actions. The rSCA package is a handy and easy-to-use tool and is freely available at http://cran.r-project.org/package=rSCA . By applying the developed package to air quality management in an urban environment, we demonstrate its effectiveness in dealing with the complicated relationships among multiple variables in real-world problems.

Highly-optimized TWSM software package for seismic diffraction modeling adapted for GPU-cluster

Science.gov (United States)

Zyatkov, Nikolay; Ayzenberg, Alena; Aizenberg, Arkady

2015-04-01

Oil producing companies concern to increase resolution capability of seismic data for complex oil-and-gas bearing deposits connected with salt domes, basalt traps, reefs, lenses, etc. Known methods of seismic wave theory define shape of hydrocarbon accumulation with nonsufficient resolution, since they do not account for multiple diffractions explicitly. We elaborate alternative seismic wave theory in terms of operators of propagation in layers and reflection-transmission at curved interfaces. Approximation of this theory is realized in the seismic frequency range as the Tip-Wave Superposition Method (TWSM). TWSM based on the operator theory allows to evaluate of wavefield in bounded domains/layers with geometrical shadow zones (in nature it can be: salt domes, basalt traps, reefs, lenses, etc.) accounting for so-called cascade diffraction. Cascade diffraction includes edge waves from sharp edges, creeping waves near concave parts of interfaces, waves of the whispering galleries near convex parts of interfaces, etc. The basic algorithm of TWSM package is based on multiplication of large-size matrices (make hundreds of terabytes in size). We use advanced information technologies for effective realization of numerical procedures of the TWSM. In particular, we actively use NVIDIA CUDA technology and GPU accelerators allowing to significantly improve the performance of the TWSM software package, that is important in using it for direct and inverse problems. The accuracy, stability and efficiency of the algorithm are justified by numerical examples with curved interfaces. TWSM package and its separate components can be used in different modeling tasks such as planning of acquisition systems, physical interpretation of laboratory modeling, modeling of individual waves of different types and in some inverse tasks such as imaging in case of laterally inhomogeneous overburden, AVO inversion.

INSPECT: A graphical user interface software package for IDARC-2D

Science.gov (United States)

AlHamaydeh, Mohammad; Najib, Mohamad; Alawnah, Sameer

Modern day Performance-Based Earthquake Engineering (PBEE) pivots about nonlinear analysis and its feasibility. IDARC-2D is a widely used and accepted software for nonlinear analysis; it possesses many attractive features and capabilities. However, it is operated from the command prompt in the DOS/Unix systems and requires elaborate text-based input files creation by the user. To complement and facilitate the use of IDARC-2D, a pre-processing GUI software package (INSPECT) is introduced herein. INSPECT is created in the C# environment and utilizes the .NET libraries and SQLite database. Extensive testing and verification demonstrated successful and high-fidelity re-creation of several existing IDARC-2D input files. Its design and built-in features aim at expediting, simplifying and assisting in the modeling process. Moreover, this practical aid enhances the reliability of the results and improves accuracy by reducing and/or eliminating many potential and common input mistakes. Such benefits would be appreciated by novice and veteran IDARC-2D users alike.

Nonlinear analysis of reinforced concrete structures using software package abaqus

Directory of Open Access Journals (Sweden)

Marković Nemanja

2014-01-01

Full Text Available Reinforced concrete (AB is characterized by huge inhomogeneity resulting from the material characteristics of the concrete, then, quasi-brittle behavior during failure. These and other phenomena require the introduction of material nonlinearity in the modeling of reinforced concrete structures. This paper presents the modeling reinforced concrete in the software package ABAQUS. A brief theoretical overview is presented of methods such as: Concrete Damage Plasticity (CDP, Smeared Concrete Cracking (CSC, Cap Plasticity (CP and Drucker-Prager model (DPM. We performed a nonlinear analysis of two-storey reinforced concrete frame by applying CDP method for modeling material nonlinearity of concrete. We have analyzed damage zones, crack propagation and loading-deflection ratio.

Software product family evaluation

NARCIS (Netherlands)

van der Linden, F; Bosch, J; Kamsties, E; Kansala, K; Krzanik, L; Obbink, H; VanDerLinden, F

2004-01-01

This paper proposes a 4-dimensional software product family engineering evaluation model. The 4 dimensions relate to the software engineering concerns of business, architecture, organisation and process. The evaluation model is meant to be used within organisations to determine the status of their

FFTF railroad tank car Safety Evaluation for Packaging

International Nuclear Information System (INIS)

Carlstrom, R.F.

1995-01-01

This Safety Evaluation for Packaging (SEP) provides evaluations considered necessary to approve transfer of the 8,000 gallon Liquid Waste Tank Car (LWTC) from Fast Flux Test Facility (FFTF) to the 200 Areas. This SEP will demonstrate that the transfer of the LWTC will provide an equivalent degree of safety as would be provided by packages meeting U.S. Department of Transportation (DOT) requirements. This fulfills onsite transportation requirements implemented in the Hazardous Material Packaging and Shipping, WHC-CM-2-14

EPILAB: a software package for studies on the prediction of epileptic seizures.

Science.gov (United States)

Teixeira, C A; Direito, B; Feldwisch-Drentrup, H; Valderrama, M; Costa, R P; Alvarado-Rojas, C; Nikolopoulos, S; Le Van Quyen, M; Timmer, J; Schelter, B; Dourado, A

2011-09-15

A Matlab®-based software package, EPILAB, was developed for supporting researchers in performing studies on the prediction of epileptic seizures. It provides an intuitive and convenient graphical user interface. Fundamental concepts that are crucial for epileptic seizure prediction studies were implemented. This includes, for example, the development and statistical validation of prediction methodologies in long-term continuous recordings. Seizure prediction is usually based on electroencephalography (EEG) and electrocardiography (ECG) signals. EPILAB is able to process both EEG and ECG data stored in different formats. More than 35 time and frequency domain measures (features) can be extracted based on univariate and multivariate data analysis. These features can be post-processed and used for prediction purposes. The predictions may be conducted based on optimized thresholds or by applying classifications methods such as artificial neural networks, cellular neuronal networks, and support vector machines. EPILAB proved to be an efficient tool for seizure prediction, and aims to be a way to communicate, evaluate, and compare results and data among the seizure prediction community. Copyright © 2011 Elsevier B.V. All rights reserved.

SWISTRACK - AN OPEN SOURCE, SOFTWARE PACKAGE APPLICABLE TO TRACKING OF FISH LOCOMOTION AND BEHAVIOUR

DEFF Research Database (Denmark)

Steffensen, John Fleng

2010-01-01

including swimming speed, acceleration and directionality of movements as well as the examination of locomotory panems during swimming. SWiSlrdL:k, a [n: t; and downloadable software package (available from www.sourceforge.com) is widely used for tracking robots, humans and other animals. Accordingly......, Swistrack can be easily adopted for the tracking offish. Benefits associated with the free software include: • Contrast or marker based tracking enabling tracking of either the whole animal, or tagged marks placed upon the animal • The ability to track multiple tags placed upon an individual animal • Highly...... effective background subtraction algorithms and filters ensuring smooth tracking of fish • Application of tags of different colour enables the software to track multiple fish without the problem of track exchange between individuals • Low processing requirements enable tracking in real-time • Further...

GMATA: An Integrated Software Package for Genome-Scale SSR Mining, Marker Development and Viewing.

Science.gov (United States)

Wang, Xuewen; Wang, Le

2016-01-01

Simple sequence repeats (SSRs), also referred to as microsatellites, are highly variable tandem DNAs that are widely used as genetic markers. The increasing availability of whole-genome and transcript sequences provides information resources for SSR marker development. However, efficient software is required to efficiently identify and display SSR information along with other gene features at a genome scale. We developed novel software package Genome-wide Microsatellite Analyzing Tool Package (GMATA) integrating SSR mining, statistical analysis and plotting, marker design, polymorphism screening and marker transferability, and enabled simultaneously display SSR markers with other genome features. GMATA applies novel strategies for SSR analysis and primer design in large genomes, which allows GMATA to perform faster calculation and provides more accurate results than existing tools. Our package is also capable of processing DNA sequences of any size on a standard computer. GMATA is user friendly, only requires mouse clicks or types inputs on the command line, and is executable in multiple computing platforms. We demonstrated the application of GMATA in plants genomes and reveal a novel distribution pattern of SSRs in 15 grass genomes. The most abundant motifs are dimer GA/TC, the A/T monomer and the GCG/CGC trimer, rather than the rich G/C content in DNA sequence. We also revealed that SSR count is a linear to the chromosome length in fully assembled grass genomes. GMATA represents a powerful application tool that facilitates genomic sequence analyses. GAMTA is freely available at http://sourceforge.net/projects/gmata/?source=navbar.

Groundwater movement simulation by the software package PM5 for the Sviyaga river adjoining territory in the Republic of Tatarstan

Science.gov (United States)

Kosterina, E. A.; Isagadzhieva, Z. Sh

2018-01-01

Data of the ecological-hydrogeological fieldwork at the Predvolzhye region of the Republic of Tatarstan were analyzed. A geofiltration model of the Buinsk region area near the village of Stary Studenets in the territory of the Republic of Tatarstan was constructed by the PM5 software package. The model can be developed to become the basis for estimation of the groundwater reserves of the territory, modeling the operation of water intake wells, designing the location of water intake wells, and evaluation of their operational capabilities, and constructing sanitary protection zones.

A new vector radiative transfer model as a part of SCIATRAN 3.0 software package.

Science.gov (United States)

Rozanov, Alexei; Rozanov, Vladimir; Burrows, John P.

The SCIATRAN 3.0 package is a result of further development of the SCIATRAN 2.x software family which, similar to previous versions, comprises a radiative transfer model and a retrieval block. A major improvement was achieved in comparison to previous software versions by adding the vector mode to the radiative transfer model. Thus, the well-established Discrete Ordinate solver can now be run in the vector mode to calculate the scattered solar radiation including polarization, i.e., to simulate all four components of the Stockes vector. Similar to the scalar version, the simulations can be performed for any viewing geometry typical for atmospheric observations in the UV-Vis-NIR spectral range (nadir, limb, off-axis, etc.) as well as for any observer position within or outside the Earth's atmosphere. Similar to the precursor version, the new model is freely available for non-commercial use via the web page of the University of Bremen. In this presentation a short description of the software package, especially of the new vector radiative transfer model will be given, including remarks on the availability for the scientific community. Furthermore, comparisons to other vector models will be shown and some example problems will be considered where the polarization of the observed radiation must be accounted for to obtain high quality results.

Evaluation of the BreastSimulator software platform for breast tomography

Science.gov (United States)

Mettivier, G.; Bliznakova, K.; Sechopoulos, I.; Boone, J. M.; Di Lillo, F.; Sarno, A.; Castriconi, R.; Russo, P.

2017-08-01

The aim of this work was the evaluation of the software BreastSimulator, a breast x-ray imaging simulation software, as a tool for the creation of 3D uncompressed breast digital models and for the simulation and the optimization of computed tomography (CT) scanners dedicated to the breast. Eight 3D digital breast phantoms were created with glandular fractions in the range 10%-35%. The models are characterised by different sizes and modelled realistic anatomical features. X-ray CT projections were simulated for a dedicated cone-beam CT scanner and reconstructed with the FDK algorithm. X-ray projection images were simulated for 5 mono-energetic (27, 32, 35, 43 and 51 keV) and 3 poly-energetic x-ray spectra typically employed in current CT scanners dedicated to the breast (49, 60, or 80 kVp). Clinical CT images acquired from two different clinical breast CT scanners were used for comparison purposes. The quantitative evaluation included calculation of the power-law exponent, β, from simulated and real breast tomograms, based on the power spectrum fitted with a function of the spatial frequency, f, of the form S(f)  =  α/f   β . The breast models were validated by comparison against clinical breast CT and published data. We found that the calculated β coefficients were close to that of clinical CT data from a dedicated breast CT scanner and reported data in the literature. In evaluating the software package BreastSimulator to generate breast models suitable for use with breast CT imaging, we found that the breast phantoms produced with the software tool can reproduce the anatomical structure of real breasts, as evaluated by calculating the β exponent from the power spectral analysis of simulated images. As such, this research tool might contribute considerably to the further development, testing and optimisation of breast CT imaging techniques.

Safety Evaluation for Packaging 101-SY Hydrogen Mitigation Mixer Pump package

International Nuclear Information System (INIS)

Carlstrom, R.F.

1994-01-01

This Safety Evaluation for Packaging (SEP) provides analysis and considered necessary to approve a one-time transfer of the 101-SY Hydrogen Mitigation Mixer Pump (HMMP). This SEP will demonstrate that the transfer of the HMMP in a new shipping container will provide an equivalent degree of safety as would be provided by packages meeting US Department of Transportation (DOT)/US Nuclear Regulatory Commission (NRC) requirements. This fulfills onsite, transportation requirements implemented by WHC-CM-2-14

Safety Evaluation for Packaging 101-SY Hydrogen Mitigation Mixer Pump package

Energy Technology Data Exchange (ETDEWEB)

Carlstrom, R.F.

1994-10-05

This Safety Evaluation for Packaging (SEP) provides analysis and considered necessary to approve a one-time transfer of the 101-SY Hydrogen Mitigation Mixer Pump (HMMP). This SEP will demonstrate that the transfer of the HMMP in a new shipping container will provide an equivalent degree of safety as would be provided by packages meeting US Department of Transportation (DOT)/US Nuclear Regulatory Commission (NRC) requirements. This fulfills onsite, transportation requirements implemented by WHC-CM-2-14.

osDesign: An R Package for the Analysis, Evaluation, and Design of Two-Phase and Case-Control Studies

Directory of Open Access Journals (Sweden)

Sebastien Haneuse

2011-08-01

Full Text Available The two-phase design has recently received attention in the statistical literature as an extension to the traditional case-control study for settings where a predictor of interest is rare or subject to missclassification. Despite a thorough methodological treatment and the potential for substantial efficiency gains, the two-phase design has not been widely adopted. This may be due, in part, to a lack of general-purpose, readily-available software. The osDesign package for R provides a suite of functions for analyzing data from a two-phase and/or case-control design, as well as evaluating operating characteristics, including bias, efficiency and power. The evaluation is simulation-based, permitting flexible application of the package to a broad range of scientific settings. Using lung cancer mortality data from Ohio, the package is illustrated with a detailed case-study in which two statistical goals are considered: (i the evaluation of small-sample operating characteristics for two-phase and case-control designs and (ii the planning and design of a future two-phase study.

Quantitation of magnetic resonance spectroscopy signals: the jMRUI software package

International Nuclear Information System (INIS)

Stefan, D; Andrasescu, A; Cesare, F Di; Popa, E; Lazariev, A; Graveron-Demilly, D; Vescovo, E; Williams, S; Strbak, O; Starcuk, Z; Cabanas, M; Van Ormondt, D

2009-01-01

The software package jMRUI with Java-based graphical user interface enables user-friendly time-domain analysis of magnetic resonance spectroscopy (MRS) and spectroscopic imaging (MRSI) and HRMAS-NMR signals. Version 3.x has been distributed in more than 1200 groups or hospitals worldwide. The new version 4.x is a plug-in platform enabling the users to add their own algorithms. Moreover, it offers new functionalities compared to versions 3.x. The quantum-mechanical simulator based on NMR-SCOPE, the quantitation algorithm QUEST and the main MRSI functionalities are described. Quantitation results of signals obtained in vivo from a mouse and a human brain are given

Lung nodule volumetry: segmentation algorithms within the same software package cannot be used interchangeably

Energy Technology Data Exchange (ETDEWEB)

Ashraf, H.; Bach, K.S.; Hansen, H. [Copenhagen University, Department of Radiology, Gentofte Hospital, Hellerup (Denmark); Hoop, B. de [University Medical Centre Utrecht, Department of Radiology, Utrecht (Netherlands); Shaker, S.B.; Dirksen, A. [Copenhagen University, Department of Respiratory Medicine, Gentofte Hospital, Hellerup (Denmark); Prokop, M. [University Medical Centre Utrecht, Department of Radiology, Utrecht (Netherlands); Radboud University Nijmegen, Department of Radiology, Nijmegen (Netherlands); Pedersen, J.H. [Copenhagen University, Department of Cardiothoracic Surgery RT, Rigshospitalet, Copenhagen (Denmark)

2010-08-15

We examined the reproducibility of lung nodule volumetry software that offers three different volumetry algorithms. In a lung cancer screening trial, 188 baseline nodules >5 mm were identified. Including follow-ups, these nodules formed a study-set of 545 nodules. Nodules were independently double read by two readers using commercially available volumetry software. The software offers readers three different analysing algorithms. We compared the inter-observer variability of nodule volumetry when the readers used the same and different algorithms. Both readers were able to correctly segment and measure 72% of nodules. In 80% of these cases, the readers chose the same algorithm. When readers used the same algorithm, exactly the same volume was measured in 50% of readings and a difference of >25% was observed in 4%. When the readers used different algorithms, 83% of measurements showed a difference of >25%. Modern volumetric software failed to correctly segment a high number of screen detected nodules. While choosing a different algorithm can yield better segmentation of a lung nodule, reproducibility of volumetric measurements deteriorates substantially when different algorithms were used. It is crucial even in the same software package to choose identical parameters for follow-up. (orig.)

Lung nodule volumetry: segmentation algorithms within the same software package cannot be used interchangeably

International Nuclear Information System (INIS)

Ashraf, H.; Bach, K.S.; Hansen, H.; Hoop, B. de; Shaker, S.B.; Dirksen, A.; Prokop, M.; Pedersen, J.H.

2010-01-01

We examined the reproducibility of lung nodule volumetry software that offers three different volumetry algorithms. In a lung cancer screening trial, 188 baseline nodules >5 mm were identified. Including follow-ups, these nodules formed a study-set of 545 nodules. Nodules were independently double read by two readers using commercially available volumetry software. The software offers readers three different analysing algorithms. We compared the inter-observer variability of nodule volumetry when the readers used the same and different algorithms. Both readers were able to correctly segment and measure 72% of nodules. In 80% of these cases, the readers chose the same algorithm. When readers used the same algorithm, exactly the same volume was measured in 50% of readings and a difference of >25% was observed in 4%. When the readers used different algorithms, 83% of measurements showed a difference of >25%. Modern volumetric software failed to correctly segment a high number of screen detected nodules. While choosing a different algorithm can yield better segmentation of a lung nodule, reproducibility of volumetric measurements deteriorates substantially when different algorithms were used. It is crucial even in the same software package to choose identical parameters for follow-up. (orig.)

Radiative transfer modeling through terrestrial atmosphere and ocean accounting for inelastic processes: Software package SCIATRAN

Science.gov (United States)

Rozanov, V. V.; Dinter, T.; Rozanov, A. V.; Wolanin, A.; Bracher, A.; Burrows, J. P.

2017-06-01

SCIATRAN is a comprehensive software package which is designed to model radiative transfer processes in the terrestrial atmosphere and ocean in the spectral range from the ultraviolet to the thermal infrared (0.18-40 μm). It accounts for multiple scattering processes, polarization, thermal emission and ocean-atmosphere coupling. The main goal of this paper is to present a recently developed version of SCIATRAN which takes into account accurately inelastic radiative processes in both the atmosphere and the ocean. In the scalar version of the coupled ocean-atmosphere radiative transfer solver presented by Rozanov et al. [61] we have implemented the simulation of the rotational Raman scattering, vibrational Raman scattering, chlorophyll and colored dissolved organic matter fluorescence. In this paper we discuss and explain the numerical methods used in SCIATRAN to solve the scalar radiative transfer equation including trans-spectral processes, and demonstrate how some selected radiative transfer problems are solved using the SCIATRAN package. In addition we present selected comparisons of SCIATRAN simulations with those published benchmark results, independent radiative transfer models, and various measurements from satellite, ground-based, and ship-borne instruments. The extended SCIATRAN software package along with a detailed User's Guide is made available for scientists and students, who are undertaking their own research typically at universities, via the web page of the Institute of Environmental Physics (IUP), University of Bremen: http://www.iup.physik.uni-bremen.de.

Smile Analyzer: A Software Package for Analyzing the Characteristics of the Speech and Smile

Directory of Open Access Journals (Sweden)

Roozbeh Rashed

2013-01-01

Full Text Available Taking into account the factors related to lip-tooth relationships in orthodontic diagnosis and treatment planning is of prime importance. Manual quantitative analysis of facial parameters on photographs during smile and speech is a difficult and time-consuming job. Since there is no comprehensive and user-friendly software package, we developed a software program called "Smile Analyzer" in the Department of Orthodontics of Mashhad Faculty of Dentistry for measuring the parameters related to lip-tooth relationships and other facial landmarks on the photographs taken during various facial expressions. The software was designed using visual basic. NET and the ADO. NET was used for developing its Microsoft Access database. The program runs on Microsoft Windows. It is capable of analyzing many parameters or variables in many patients' photographs, although 19 more common variables are previously defined as a default list of variables. When all variables are measured or calculated, a report can be generated and saved in either PDF or MS Excel format. Data are readily transferable to statistical software like SPSS for Windows.  

Smile Analyzer: A Software Package for Analyzing the Characteristics of the Speech and Smile

Directory of Open Access Journals (Sweden)

Farzin Heravi

2012-09-01

Full Text Available Taking into account the factors related to lip-tooth relationships in orthodontic diagnosis and treatment planning is of prime importance. Manual quantitative analysis of facial parameters on photographs during smile and speech is a difficult and time-consuming job. Since there is no comprehensive and user-friendly software package, we developed a software program called "Smile Analyzer" in the Department of Orthodontics of Mashhad Faculty of Dentistry for measuring the parameters related to lip-tooth relationships and other facial landmarks on the photographs taken during various facial expressions. The software was designed using visual basic. NET and the ADO. NET was used for developing its Microsoft Access database. The program runs on Microsoft Windows. It is capable of analyzing many parameters or variables in many patients' photographs, although 19 more common variables are previously defined as a default list of variables. When all variables are measured or calculated, a report can be generated and saved in either PDF or MS Excel format. Data are readily transferable to statistical software like SPSS for Windows.

Programming task packages: Peach exchange format

NARCIS (Netherlands)

Verhoeff, T.

2008-01-01

Programming education and contests have introduced software to help evaluation by executing submitted taskwork. We present the notion of a task package as a unit for collecting, storing, archiving, and exchanging all information concerning a programming task. We also describe a specific format for

Guidelines for the verification and validation of expert system software and conventional software: Volume 5, Rationale and description of verification and validation guideline packages and procedures. Final report

International Nuclear Information System (INIS)

Miller, L.A.; Hayes, J.E.; Mirsky, S.M.

1995-05-01

This report is the fifth volume in a series of reports describing the results of the Expert System Verification and Validation (V ampersand V) project which is jointly funded by US NRC and EPRI toward formulating guidelines for V ampersand V of expert systems for use in nuclear power applications. This report provides the rationale for and description of those guidelines. The actual guidelines themselves (and the accompanying 11 step by step Procedures) are presented in Volume 7, User's Manual. Three factors determine what V ampersand V is needed: (1) the stage, of the development life cycle (requirements, design, or implementation), (2) whether the overall system or a specialized component needs be tested (knowledge base component, inference engine or other highly reusable element, or a component involving conventional software), and (3) the stringency of V ampersand V that is needed (as judged from an assessment of the system's complexity and the requirement for its integrity to form three Classes). A V ampersand V guideline package is provided for each of the combinations of these three variables. The package specifies the V ampersand V methods recommended and the order in which they should be administered, the assurances each method provides, the qualifications needed by the V ampersand V team to employ each Particular method, the degree to which the methods should be applied, the performance measures that should be taken, and the decision criteria for accepting, conditionally accepting, or rejecting an evaluated system. In addition to the guideline packages, highly detailed step-by-step procedures are provided for 11 of the more important methods, to ensure that they Can be implemented correctly. The guidelines can apply to conventional procedural software systems as well as all kinds of AI systems

UES: an optimization software package for power and energy

International Nuclear Information System (INIS)

Vohryzek, J.; Havlena, V.; Findejs, J.; Jech, J.

2004-01-01

Unified Energy Solutions components are designed to meet specific requirements of the electric utilities, industrial power units, and district heating (combined heat and power) plants. The optimization objective is to operate the plant with maximum process efficiency and operational profit under the constraints imposed by technology and environmental impacts. Software applications for advanced control real-time optimization may provide a low-cost, high return alternative to expensive boiler retrofits for improving operational profit as well as reducing emissions. Unified Energy Solutions (UES) software package is a portfolio of advanced control and optimization components running on top of the standard process regulatory and control system. The objective of the UES is to operate the plant with maximum achievable profit (maximum efficiency) under the constraints imposed by technology (life-time consumption, asset health) and environmental impacts (CO and NO x emissions). Fast responsiveness to varying economic conditions and integration of real-time optimization and operator decision support (off-line) features are critical for operation in real-time economy. Optimization Features are targeted to combustion process, heat and power load allocation to parallel resources, electric power delivery and ancillary services. Optimization Criteria include increased boiler thermal efficiency, maintaining emission limits, economic load allocation of the heat and generation sources. State-of-the-art advanced control algorithms use model based predictive control principles and provide superior response in transient states. Individual software modules support open control platforms and communication protocols. UES can be implemented on a wide range of distributed control systems. Typical achievable benefits include heat and power production costs savings, increased effective boiler operation range, optimized flue gas emissions, optimized production capacity utilization, optimized

SEJV2 software package for radiation monitoring system of WWER 440 NPP

International Nuclear Information System (INIS)

Kapisovsky, V.; Jancik, O.; Kubik, I.; Bena, J.

1993-01-01

The main part of the radiation monitoring system at a WWER-440 (213 reactor type) nuclear power plant is the centralized 400-channel monitoring system 'SEJVAL' servicing twin reactor units. The SEJV2 software package is described developed to run on a PC with an IFS2 interface to the SEJVAL radiation monitoring system. It provides enhanced data presentation, record keeping and report generation, thus improving the efficiency of the health physics shift. The system was for the first time implemented at the Jaslovske Bohunice V-2 nuclear power plant with encouraging results. (Z.S.) 3 refs

SLDAssay: A software package and web tool for analyzing limiting dilution assays.

Science.gov (United States)

Trumble, Ilana M; Allmon, Andrew G; Archin, Nancie M; Rigdon, Joseph; Francis, Owen; Baldoni, Pedro L; Hudgens, Michael G

2017-11-01

Serial limiting dilution (SLD) assays are used in many areas of infectious disease related research. This paper presents SLDAssay, a free and publicly available R software package and web tool for analyzing data from SLD assays. SLDAssay computes the maximum likelihood estimate (MLE) for the concentration of target cells, with corresponding exact and asymptotic confidence intervals. Exact and asymptotic goodness of fit p-values, and a bias-corrected (BC) MLE are also provided. No other publicly available software currently implements the BC MLE or the exact methods. For validation of SLDAssay, results from Myers et al. (1994) are replicated. Simulations demonstrate the BC MLE is less biased than the MLE. Additionally, simulations demonstrate that exact methods tend to give better confidence interval coverage and goodness-of-fit tests with lower type I error than the asymptotic methods. Additional advantages of using exact methods are also discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

Development of the processing software package for RPV neutron fluence determination methodology

International Nuclear Information System (INIS)

Belousov, S.; Kirilova, K.; Ilieva, K.

2001-01-01

According to the INRNE methodology the neutron transport calculation is carried out by two steps. At the first step reactor core eigenvalue calculation is performed. This calculation is used for determination of the fixed source for the next step calculation of neutron transport from the reactor core to the RPV. Both calculation steps are performed by state of the art and tested codes. The interface software package DOSRC developed at INRNE is used as a link between these two calculations. The package transforms reactor core calculation results to neutron source input data in format appropriate for the neutron transport codes (DORT, TORT and ASYNT) based on the discrete ordinates method. These codes are applied for calculation of the RPV neutron flux and its responses - induced activity, radiation damage, neutron fluence etc. Fore more precise estimation of the neutron fluence, the INRNE methodology has been supplemented by the next improvements: - implementation of more advanced codes (PYTHIA/DERAB) for neutron-physics parameter calculations; - more detailed neutron source presentation; - verification of neutron fluence by statistically treated experimental data. (author)

PONDEROSA-C/S: client-server based software package for automated protein 3D structure determination.

Science.gov (United States)

Lee, Woonghee; Stark, Jaime L; Markley, John L

2014-11-01

Peak-picking Of Noe Data Enabled by Restriction Of Shift Assignments-Client Server (PONDEROSA-C/S) builds on the original PONDEROSA software (Lee et al. in Bioinformatics 27:1727-1728. doi: 10.1093/bioinformatics/btr200, 2011) and includes improved features for structure calculation and refinement. PONDEROSA-C/S consists of three programs: Ponderosa Server, Ponderosa Client, and Ponderosa Analyzer. PONDEROSA-C/S takes as input the protein sequence, a list of assigned chemical shifts, and nuclear Overhauser data sets ((13)C- and/or (15)N-NOESY). The output is a set of assigned NOEs and 3D structural models for the protein. Ponderosa Analyzer supports the visualization, validation, and refinement of the results from Ponderosa Server. These tools enable semi-automated NMR-based structure determination of proteins in a rapid and robust fashion. We present examples showing the use of PONDEROSA-C/S in solving structures of four proteins: two that enable comparison with the original PONDEROSA package, and two from the Critical Assessment of automated Structure Determination by NMR (Rosato et al. in Nat Methods 6:625-626. doi: 10.1038/nmeth0909-625 , 2009) competition. The software package can be downloaded freely in binary format from http://pine.nmrfam.wisc.edu/download_packages.html. Registered users of the National Magnetic Resonance Facility at Madison can submit jobs to the PONDEROSA-C/S server at http://ponderosa.nmrfam.wisc.edu, where instructions, tutorials, and instructions can be found. Structures are normally returned within 1-2 days.

FF. A package to evaluate one-loop Feynman diagrams

International Nuclear Information System (INIS)

Oldenborgh, G.J. van

1990-09-01

A short description and a user's guide of the FF package are given. This package contains routines to evaluate numerically the scalar one-loop integrals occurring in the evaluation in one-loop Feynman diagrams. The algorithms chosen are numerically stable over most parameter space. (author). 5 refs.; 1 tab

The CASA Software Package

Science.gov (United States)

Petry, Dirk

2018-03-01

CASA is the standard science data analysis package for ALMA and VLA but it can also be used for the analysis of data from other observatories. In this talk, I will give an overview of the structure and features of CASA, who develops it, and the present status and plans, and then show typical analysis workflows for ALMA data with special emphasis on the handling of single dish data and its combination with interferometric data.

Computing and software

Directory of Open Access Journals (Sweden)

White, G. C.

2004-06-01

Full Text Available The reality is that the statistical methods used for analysis of data depend upon the availability of software. Analysis of marked animal data is no different than the rest of the statistical field. The methods used for analysis are those that are available in reliable software packages. Thus, the critical importance of having reliable, up–to–date software available to biologists is obvious. Statisticians have continued to develop more robust models, ever expanding the suite of potential analysis methods available. But without software to implement these newer methods, they will languish in the abstract, and not be applied to the problems deserving them. In the Computers and Software Session, two new software packages are described, a comparison of implementation of methods for the estimation of nest survival is provided, and a more speculative paper about how the next generation of software might be structured is presented. Rotella et al. (2004 compare nest survival estimation with different software packages: SAS logistic regression, SAS non–linear mixed models, and Program MARK. Nests are assumed to be visited at various, possibly infrequent, intervals. All of the approaches described compute nest survival with the same likelihood, and require that the age of the nest is known to account for nests that eventually hatch. However, each approach offers advantages and disadvantages, explored by Rotella et al. (2004. Efford et al. (2004 present a new software package called DENSITY. The package computes population abundance and density from trapping arrays and other detection methods with a new and unique approach. DENSITY represents the first major addition to the analysis of trapping arrays in 20 years. Barker & White (2004 discuss how existing software such as Program MARK require that each new model’s likelihood must be programmed specifically for that model. They wishfully think that future software might allow the user to combine

The Supertree Toolkit 2: a new and improved software package with a Graphical User Interface for supertree construction

Directory of Open Access Journals (Sweden)

Jon Hill

2014-03-01

Full Text Available Building large supertrees involves the collection, storage, and processing of thousands of individual phylogenies to create large phylogenies with thousands to tens of thousands of taxa. Such large phylogenies are useful for macroevolutionary studies, comparative biology and in conservation and biodiversity. No easy to use and fully integrated software package currently exists to carry out this task. Here, we present a new Python-based software package that uses well defined XML schema to manage both data and metadata. It builds on previous versions by 1 including new processing steps, such as Safe Taxonomic Reduction, 2 using a user-friendly GUI that guides the user to complete at least the minimum information required and includes context-sensitive documentation, and 3 a revised storage format that integrates both tree- and meta-data into a single file. These data can then be manipulated according to a well-defined, but flexible, processing pipeline using either the GUI or a command-line based tool. Processing steps include standardising names, deleting or replacing taxa, ensuring adequate taxonomic overlap, ensuring data independence, and safe taxonomic reduction. This software has been successfully used to store and process data consisting of over 1000 trees ready for analyses using standard supertree methods. This software makes large supertree creation a much easier task and provides far greater flexibility for further work.

The Supertree Toolkit 2: a new and improved software package with a Graphical User Interface for supertree construction.

Science.gov (United States)

Hill, Jon; Davis, Katie E

2014-01-01

Building large supertrees involves the collection, storage, and processing of thousands of individual phylogenies to create large phylogenies with thousands to tens of thousands of taxa. Such large phylogenies are useful for macroevolutionary studies, comparative biology and in conservation and biodiversity. No easy to use and fully integrated software package currently exists to carry out this task. Here, we present a new Python-based software package that uses well defined XML schema to manage both data and metadata. It builds on previous versions by 1) including new processing steps, such as Safe Taxonomic Reduction, 2) using a user-friendly GUI that guides the user to complete at least the minimum information required and includes context-sensitive documentation, and 3) a revised storage format that integrates both tree- and meta-data into a single file. These data can then be manipulated according to a well-defined, but flexible, processing pipeline using either the GUI or a command-line based tool. Processing steps include standardising names, deleting or replacing taxa, ensuring adequate taxonomic overlap, ensuring data independence, and safe taxonomic reduction. This software has been successfully used to store and process data consisting of over 1000 trees ready for analyses using standard supertree methods. This software makes large supertree creation a much easier task and provides far greater flexibility for further work.

Dynamic modelling and PID loop control of an oil-injected screw compressor package

Science.gov (United States)

Poli, G. W.; Milligan, W. J.; McKenna, P.

2017-08-01

A significant amount of time is spent tuning the PID (Proportional, Integral and Derivative) control loops of a screw compressor package due to the unique characteristics of the system. Common mistakes incurred during the tuning of a PID control loop include improper PID algorithm selection and unsuitable tuning parameters of the system resulting in erratic and inefficient operation. This paper details the design and development of software that aims to dynamically model the operation of a single stage oil injected screw compressor package deployed in upstream oil and gas applications. The developed software will be used to assess and accurately tune PID control loops present on the screw compressor package employed in controlling the oil pressures, temperatures and gas pressures, in a bid to improve control of the operation of the screw compressor package. Other applications of the modelling software will include its use as an evaluation tool that can estimate compressor package performance during start up, shutdown and emergency shutdown processes. The paper first details the study into the fundamental operational characteristics of each of the components present on the API 619 screw compressor package and then discusses the creation of a dynamic screw compressor model within the MATLAB/Simulink software suite. The paper concludes by verifying and assessing the accuracy of the created compressor model using data collected from physical screw compressor packages.

Analysing the Zenith Tropospheric Delay Estimates in On-line Precise Point Positioning (PPP) Services and PPP Software Packages.

Science.gov (United States)

Mendez Astudillo, Jorge; Lau, Lawrence; Tang, Yu-Ting; Moore, Terry

2018-02-14

As Global Navigation Satellite System (GNSS) signals travel through the troposphere, a tropospheric delay occurs due to a change in the refractive index of the medium. The Precise Point Positioning (PPP) technique can achieve centimeter/millimeter positioning accuracy with only one GNSS receiver. The Zenith Tropospheric Delay (ZTD) is estimated alongside with the position unknowns in PPP. Estimated ZTD can be very useful for meteorological applications, an example is the estimation of water vapor content in the atmosphere from the estimated ZTD. PPP is implemented with different algorithms and models in online services and software packages. In this study, a performance assessment with analysis of ZTD estimates from three PPP online services and three software packages is presented. The main contribution of this paper is to show the accuracy of ZTD estimation achievable in PPP. The analysis also provides the GNSS users and researchers the insight of the processing algorithm dependence and impact on PPP ZTD estimation. Observation data of eight whole days from a total of nine International GNSS Service (IGS) tracking stations spread in the northern hemisphere, the equatorial region and the southern hemisphere is used in this analysis. The PPP ZTD estimates are compared with the ZTD obtained from the IGS tropospheric product of the same days. The estimates of two of the three online PPP services show good agreement (<1 cm) with the IGS ZTD values at the northern and southern hemisphere stations. The results also show that the online PPP services perform better than the selected PPP software packages at all stations.

Analysing the Zenith Tropospheric Delay Estimates in On-line Precise Point Positioning (PPP Services and PPP Software Packages

Directory of Open Access Journals (Sweden)

Jorge Mendez Astudillo

2018-02-01

Full Text Available As Global Navigation Satellite System (GNSS signals travel through the troposphere, a tropospheric delay occurs due to a change in the refractive index of the medium. The Precise Point Positioning (PPP technique can achieve centimeter/millimeter positioning accuracy with only one GNSS receiver. The Zenith Tropospheric Delay (ZTD is estimated alongside with the position unknowns in PPP. Estimated ZTD can be very useful for meteorological applications, an example is the estimation of water vapor content in the atmosphere from the estimated ZTD. PPP is implemented with different algorithms and models in online services and software packages. In this study, a performance assessment with analysis of ZTD estimates from three PPP online services and three software packages is presented. The main contribution of this paper is to show the accuracy of ZTD estimation achievable in PPP. The analysis also provides the GNSS users and researchers the insight of the processing algorithm dependence and impact on PPP ZTD estimation. Observation data of eight whole days from a total of nine International GNSS Service (IGS tracking stations spread in the northern hemisphere, the equatorial region and the southern hemisphere is used in this analysis. The PPP ZTD estimates are compared with the ZTD obtained from the IGS tropospheric product of the same days. The estimates of two of the three online PPP services show good agreement (<1 cm with the IGS ZTD values at the northern and southern hemisphere stations. The results also show that the online PPP services perform better than the selected PPP software packages at all stations.

Accuracy evaluation of fusion of CT, MR, and SPECT images using commercially available software packages (SRS PLATO and IFS)

International Nuclear Information System (INIS)

Mongioj, Valeria; Brusa, Anna; Loi, Gianfranco; Pignoli, Emanuele; Gramaglia, Alberto; Scorsetti, Marta; Bombardieri, Emilio; Marchesini, Renato

1999-01-01

Purpose: A problem for clinicians is to mentally integrate information from multiple diagnostic sources, such as computed tomography (CT), magnetic resonance (MR), and single photon emission computed tomography (SPECT), whose images give anatomic and metabolic information. Methods and Materials: To combine this different imaging procedure information, and to overlay correspondent slices, we used commercially available software packages (SRS PLATO and IFS). The algorithms utilize a fiducial-based coordinate system (or frame) with 3 N-shaped markers, which allows coordinate transformation of a clinical examination data set (9 spots for each transaxial section) to a stereotactic coordinate system. The N-shaped markers were filled with fluids visible in each modality (gadolinium for MR, calcium chloride for CT, and 99m Tc for SPECT). The frame is relocatable, in the different acquisition modalities, by means of a head holder to which a face mask is fixed so as to immobilize the patient. Position errors due to the algorithms were obtained by evaluating the stereotactic coordinates of five sources detectable in each modality. Results: SPECT and MR position errors due to the algorithms were evaluated with respect to CT: Δx was ≤ 0.9 mm for MR and ≤ 1.4 mm for SPECT, Δy was ≤ 1 mm and ≤ 3 mm for MR and SPECT, respectively. Maximal differences in distance between estimated and actual fiducial centers (geometric mismatch) were in the order of the pixel size (0.8 mm for CT, 1.4 mm for MR, and 1.8 mm for SPECT). In an attempt to distinguish necrosis from residual disease, the image fusion protocol was studied in 35 primary or metastatic brain tumor patients. Conclusions: The image fusion technique has a good degree of accuracy as well as the potential to improve the specificity of tissue identification and the precision of the subsequent treatment planning

Cross-Platform Learning Media Development of Software Installation on Computer Engineering and Networking Expertise Package

Directory of Open Access Journals (Sweden)

Afis Pratama

2018-03-01

Full Text Available Software Installation is one of the important lessons that must be mastered by student of computer and network engineering expertise package. But there is a problem about the lack of attention and concentration of students in following the teaching and learning process in the subject of installation of the software. The matter must immediately find a solution. This research refers to the technology development that is always increasing. The technology can be used as a tool to support learning activities. Currently, all grade 10 students in public vocational high school (SMK 8 Semarang Indonesia already have a gadget, either a smartphone or a laptop and the intensity of usage is high enough. Based on this phenomenon, this research aims to create a learning media software installation that is cross-platform. It is practical and can be carried easily in a smartphone and a laptop that has different operating system. So that, this media is expected to improve learning outcomes, understanding and enthusiasm of the students in the software installation lesson.

Selection of software for mechanical engineering undergraduates

International Nuclear Information System (INIS)

Cheah, C. T.; Yin, C. S.; Halim, T.; Naser, J.; Blicblau, A. S.

2016-01-01

A major problem with the undergraduate mechanical course is the limited exposure of students to software packages coupled with the long learning curve on the existing software packages. This work proposes the use of appropriate software packages for the entire mechanical engineering curriculum to ensure students get sufficient exposure real life design problems. A variety of software packages are highlighted as being suitable for undergraduate work in mechanical engineering, e.g. simultaneous non-linear equations; uncertainty analysis; 3-D modeling software with the FEA; analysis tools for the solution of problems in thermodynamics, fluid mechanics, mechanical system design, and solid mechanics.

Selection of software for mechanical engineering undergraduates

Energy Technology Data Exchange (ETDEWEB)

Cheah, C. T.; Yin, C. S.; Halim, T.; Naser, J.; Blicblau, A. S., E-mail: ablicblau@swin.edu.au [Swinburne University of Technology, Faculty of Science Engineering and Technology, PO Box 218 Hawthorn, Victoria, Australia, 3122 (Australia)

2016-07-12

A major problem with the undergraduate mechanical course is the limited exposure of students to software packages coupled with the long learning curve on the existing software packages. This work proposes the use of appropriate software packages for the entire mechanical engineering curriculum to ensure students get sufficient exposure real life design problems. A variety of software packages are highlighted as being suitable for undergraduate work in mechanical engineering, e.g. simultaneous non-linear equations; uncertainty analysis; 3-D modeling software with the FEA; analysis tools for the solution of problems in thermodynamics, fluid mechanics, mechanical system design, and solid mechanics.

The consequences of a new software package for the quantification of gated-SPECT myocardial perfusion studies

International Nuclear Information System (INIS)

Veen, Berlinda J. van der; Dibbets-Schneider, Petra; Stokkel, Marcel P.M.; Scholte, Arthur J.

2010-01-01

Semiquantitative analysis of myocardial perfusion scintigraphy (MPS) has reduced inter- and intraobserver variability, and enables researchers to compare parameters in the same patient over time, or between groups of patients. There are several software packages available that are designed to process MPS data and quantify parameters. In this study the performances of two systems, quantitative gated SPECT (QGS) and 4D-MSPECT, in the processing of clinical patient data and phantom data were compared. The clinical MPS data of 148 consecutive patients were analysed using QGS and 4D-MSPECT to determine the end-diastolic volume, end-systolic volume and left ventricular ejection fraction. Patients were divided into groups based on gender, body mass index, heart size, stressor type and defect type. The AGATE dynamic heart phantom was used to provide reference values for the left ventricular ejection fraction. Although the correlations were excellent (correlation coefficients 0.886 to 0.980) for all parameters, significant differences (p < 0.001) were found between the systems. Bland-Altman plots indicated that 4D-MSPECT provided overall higher values of all parameters than QGS. These differences between the systems were not significant in patients with a small heart (end-diastolic volume <70 ml). Other clinical factors had no direct influence on the relationship. Additionally, the phantom data indicated good linear responses of both systems. The discrepancies between these software packages were clinically relevant, and influenced by heart size. The possibility of such discrepancies should be taken into account when a new quantitative software system is introduced, or when multiple software systems are used in the same institution. (orig.)

User’s guide for GcClust—An R package for clustering of regional geochemical data

Science.gov (United States)

Ellefsen, Karl J.; Smith, David B.

2016-04-08

GcClust is a software package developed by the U.S. Geological Survey for statistical clustering of regional geochemical data, and similar data such as regional mineralogical data. Functions within the software package are written in the R statistical programming language. These functions, their documentation, and a copy of the user’s guide are bundled together in R’s unit of sharable code, which is called a “package.” The user’s guide includes step-by-step instructions showing how the functions are used to cluster data and to evaluate the clustering results. These functions are demonstrated in this report using test data, which are included in the package.

An automated approach to Litchfield and Wilcoxon's evaluation of dose–effect experiments using the R package LW1949

Science.gov (United States)

Adams, Jean V.; Slaght, Karen; Boogaard, Michael A.

2016-01-01

The authors developed a package, LW1949, for use with the statistical software R to automatically carry out the manual steps of Litchfield and Wilcoxon's method of evaluating dose–effect experiments. The LW1949 package consistently finds the best fitting dose–effect relation by minimizing the chi-squared statistic of the observed and expected number of affected individuals and substantially speeds up the line-fitting process and other calculations that Litchfield and Wilcoxon originally carried out by hand. Environ Toxicol Chem 2016;9999:1–4. Published 2016 Wiley Periodicals Inc. on behalf of SETAC. This article is a US Government work and, as such, is in the public domain in the United States of America.

MOlecular MAterials Property Prediction Package (MOMAP) 1.0: a software package for predicting the luminescent properties and mobility of organic functional materials

Science.gov (United States)

Niu, Yingli; Li, Wenqiang; Peng, Qian; Geng, Hua; Yi, Yuanping; Wang, Linjun; Nan, Guangjun; Wang, Dong; Shuai, Zhigang

2018-04-01

MOlecular MAterials Property Prediction Package (MOMAP) is a software toolkit for molecular materials property prediction. It focuses on luminescent properties and charge mobility properties. This article contains a brief descriptive introduction of key features, theoretical models and algorithms of the software, together with examples that illustrate the performance. First, we present the theoretical models and algorithms for molecular luminescent properties calculation, which includes the excited-state radiative/non-radiative decay rate constant and the optical spectra. Then, a multi-scale simulation approach and its algorithm for the molecular charge mobility are described. This approach is based on hopping model and combines with Kinetic Monte Carlo and molecular dynamics simulations, and it is especially applicable for describing a large category of organic semiconductors, whose inter-molecular electronic coupling is much smaller than intra-molecular charge reorganisation energy.

The Use of Digital Radiography in the Evaluation of Radioactive Materials. Packaging Performance Testing

International Nuclear Information System (INIS)

May, C; Lawrence Gelder, L; Boyd Howard, B

2007-01-01

New designs of radioactive material shipping packages are required to be evaluated in accordance with 10 CFR Part 71, ''Packaging and Transportation of Radioactive Material''. This paper will discuss the use of digital radiography to evaluate the effects of the tests required by 10 CFR 71.71, Normal Conditions of Transport (NCT), and 10 CFR 71.73, Hypothetical Accident Conditions (HAC). One acceptable means of evaluating packaging performance is to subject packagings to the series of NCT and HAC tests. The evaluation includes a determination of the effect on the packaging by the conditions and tests. That determination has required that packagings be cut and sectioned to learn the actual effects on internal components. Digital radiography permits the examination of internal packaging components without sectioning a package. This allows a single package to be subjected to a series of tests. After each test, the package is digitally radiographed and the effects of particular tests evaluated. Radiography reduces the number of packages required for testing and also reduces labor and materials required to section and evaluate numerous packages. This paper will include a description of the digital radiography equipment used in the testing and evaluation of the 9977 and 9978 packages at SRNL. The equipment is capable of making a single radiograph of a full-sized package in one exposure. Radiographs will be compared to sectioned packages that show actual conditions compared to radiographic images

Hazardous materials package performance regulations

International Nuclear Information System (INIS)

Russell, N.A.; Glass, R.E.; McClure, J.D.; Finley, N.C.

1993-01-01

Two regulatory philosophies, one based on 'specification' packaging standards and the other based on 'performance' packaging standards, currently define the hazmat packaging certification process. A main concern when setting performance standards is determining the appropriate standards necessary to assure adequate public protection. This paper discusses a Hazmat Packaging Performance Evaluation (HPPE) project being conducted at Sandia National Laboratories for the U.S. Department of Transportation Research and Special Programs Administration. In this project, the current bulk packagings (larger than 2000 gallons) for transporting Materials Extremely Toxic By Inhalation (METBI) are being evaluated and performance standards will be recommended. A computer software system, HazCon, has been developed which can calculate the dispersion of dense, neutral, and buoyant gases. HazCon also has a database of thermodynamic and toxicity data for the METBI materials, a user-friendly menu-driven format for creating input data sets for calculating dispersion of the METBI in the event of an accidental release, and a link between the METBI database and the dense gas dispersion code (which requires thermodynamic properties). The primary output of HazCon is a listing of mass concentrations of the released material at distances downwind from the release point. (J.P.N.)

Integrated performance assessment model for waste package behavior and radionuclide release

International Nuclear Information System (INIS)

Kossik, R.; Miller, I.; Cunnane, M.

1992-01-01

Golder Associates Inc. (GAI) has developed a probabilistic total system performance assessment and strategy evaluation model (RIP) which can be applied in an iterative manner to evaluate repository site suitability and guide site characterization. This paper describes one component of the RIP software, the waste package behavior and radionuclide release model. The waste package component model considers waste package failure by various modes, matrix alteration/dissolution, and radionuclide mass transfer. Model parameters can be described as functions of local environmental conditions. The waste package component model is coupled to component models for far-field radionuclide transport and disruptive events. The model has recently been applied to the proposed repository at Yucca Mountain

A software package to process an INIS magnetic tape on the VAX computer

International Nuclear Information System (INIS)

Omar, A.A.; Mohamed, F.A.

1991-01-01

This paper presents a software package whose function is to process the magnetic tapes distributed by the Atomic Energy Agency, on the VAX computers. These tapes contain abstracts of papers in the different branches of nuclear field and is supplied from the international Nuclear Information system (INIS). Two goals are aimed from this paper. First it gives a procedure to process any foreign magnetic tape on the VAX computers. Second, it solves the problem of reading the INIS tapes on a non IBM computer and thus allowing the specialists to gain from the large amount of information contained in these tapes. 11 fig

Intrinsic noise analyzer: a software package for the exploration of stochastic biochemical kinetics using the system size expansion.

Science.gov (United States)

Thomas, Philipp; Matuschek, Hannes; Grima, Ramon

2012-01-01

The accepted stochastic descriptions of biochemical dynamics under well-mixed conditions are given by the Chemical Master Equation and the Stochastic Simulation Algorithm, which are equivalent. The latter is a Monte-Carlo method, which, despite enjoying broad availability in a large number of existing software packages, is computationally expensive due to the huge amounts of ensemble averaging required for obtaining accurate statistical information. The former is a set of coupled differential-difference equations for the probability of the system being in any one of the possible mesoscopic states; these equations are typically computationally intractable because of the inherently large state space. Here we introduce the software package intrinsic Noise Analyzer (iNA), which allows for systematic analysis of stochastic biochemical kinetics by means of van Kampen's system size expansion of the Chemical Master Equation. iNA is platform independent and supports the popular SBML format natively. The present implementation is the first to adopt a complementary approach that combines state-of-the-art analysis tools using the computer algebra system Ginac with traditional methods of stochastic simulation. iNA integrates two approximation methods based on the system size expansion, the Linear Noise Approximation and effective mesoscopic rate equations, which to-date have not been available to non-expert users, into an easy-to-use graphical user interface. In particular, the present methods allow for quick approximate analysis of time-dependent mean concentrations, variances, covariances and correlations coefficients, which typically outperforms stochastic simulations. These analytical tools are complemented by automated multi-core stochastic simulations with direct statistical evaluation and visualization. We showcase iNA's performance by using it to explore the stochastic properties of cooperative and non-cooperative enzyme kinetics and a gene network associated with

Intrinsic noise analyzer: a software package for the exploration of stochastic biochemical kinetics using the system size expansion.

Directory of Open Access Journals (Sweden)

Philipp Thomas

Full Text Available The accepted stochastic descriptions of biochemical dynamics under well-mixed conditions are given by the Chemical Master Equation and the Stochastic Simulation Algorithm, which are equivalent. The latter is a Monte-Carlo method, which, despite enjoying broad availability in a large number of existing software packages, is computationally expensive due to the huge amounts of ensemble averaging required for obtaining accurate statistical information. The former is a set of coupled differential-difference equations for the probability of the system being in any one of the possible mesoscopic states; these equations are typically computationally intractable because of the inherently large state space. Here we introduce the software package intrinsic Noise Analyzer (iNA, which allows for systematic analysis of stochastic biochemical kinetics by means of van Kampen's system size expansion of the Chemical Master Equation. iNA is platform independent and supports the popular SBML format natively. The present implementation is the first to adopt a complementary approach that combines state-of-the-art analysis tools using the computer algebra system Ginac with traditional methods of stochastic simulation. iNA integrates two approximation methods based on the system size expansion, the Linear Noise Approximation and effective mesoscopic rate equations, which to-date have not been available to non-expert users, into an easy-to-use graphical user interface. In particular, the present methods allow for quick approximate analysis of time-dependent mean concentrations, variances, covariances and correlations coefficients, which typically outperforms stochastic simulations. These analytical tools are complemented by automated multi-core stochastic simulations with direct statistical evaluation and visualization. We showcase iNA's performance by using it to explore the stochastic properties of cooperative and non-cooperative enzyme kinetics and a gene network

Intrinsic Noise Analyzer: A Software Package for the Exploration of Stochastic Biochemical Kinetics Using the System Size Expansion

Science.gov (United States)

Grima, Ramon

2012-01-01

The accepted stochastic descriptions of biochemical dynamics under well-mixed conditions are given by the Chemical Master Equation and the Stochastic Simulation Algorithm, which are equivalent. The latter is a Monte-Carlo method, which, despite enjoying broad availability in a large number of existing software packages, is computationally expensive due to the huge amounts of ensemble averaging required for obtaining accurate statistical information. The former is a set of coupled differential-difference equations for the probability of the system being in any one of the possible mesoscopic states; these equations are typically computationally intractable because of the inherently large state space. Here we introduce the software package intrinsic Noise Analyzer (iNA), which allows for systematic analysis of stochastic biochemical kinetics by means of van Kampen’s system size expansion of the Chemical Master Equation. iNA is platform independent and supports the popular SBML format natively. The present implementation is the first to adopt a complementary approach that combines state-of-the-art analysis tools using the computer algebra system Ginac with traditional methods of stochastic simulation. iNA integrates two approximation methods based on the system size expansion, the Linear Noise Approximation and effective mesoscopic rate equations, which to-date have not been available to non-expert users, into an easy-to-use graphical user interface. In particular, the present methods allow for quick approximate analysis of time-dependent mean concentrations, variances, covariances and correlations coefficients, which typically outperforms stochastic simulations. These analytical tools are complemented by automated multi-core stochastic simulations with direct statistical evaluation and visualization. We showcase iNA’s performance by using it to explore the stochastic properties of cooperative and non-cooperative enzyme kinetics and a gene network associated with

Assessment of Computer Software Usage for Estimating and Tender ...

African Journals Online (AJOL)

It has been discovered that there are limitations to the use of computer software packages in construction operations especially estimating and tender analysis. The objectives of this research is to evaluate the level of computer software usage for estimating and tender analysis while also assessing the challenges faced by ...

Variability of global left ventricular deformation analysis using vendor dependent and independent two-dimensional speckle-tracking software in adults

DEFF Research Database (Denmark)

Risum, Niels; Ali, Sophia; Olsen, Niels T

2012-01-01

Evaluation of myocardial deformation by two-dimensional speckle-tracking is useful for clinical and research purposes. However, differences may exist among different ultrasound machines, software packages, frame rates, and observers.......Evaluation of myocardial deformation by two-dimensional speckle-tracking is useful for clinical and research purposes. However, differences may exist among different ultrasound machines, software packages, frame rates, and observers....

SMOG 2: A Versatile Software Package for Generating Structure-Based Models.

Science.gov (United States)

Noel, Jeffrey K; Levi, Mariana; Raghunathan, Mohit; Lammert, Heiko; Hayes, Ryan L; Onuchic, José N; Whitford, Paul C

2016-03-01

Molecular dynamics simulations with coarse-grained or simplified Hamiltonians have proven to be an effective means of capturing the functionally important long-time and large-length scale motions of proteins and RNAs. Originally developed in the context of protein folding, structure-based models (SBMs) have since been extended to probe a diverse range of biomolecular processes, spanning from protein and RNA folding to functional transitions in molecular machines. The hallmark feature of a structure-based model is that part, or all, of the potential energy function is defined by a known structure. Within this general class of models, there exist many possible variations in resolution and energetic composition. SMOG 2 is a downloadable software package that reads user-designated structural information and user-defined energy definitions, in order to produce the files necessary to use SBMs with high performance molecular dynamics packages: GROMACS and NAMD. SMOG 2 is bundled with XML-formatted template files that define commonly used SBMs, and it can process template files that are altered according to the needs of each user. This computational infrastructure also allows for experimental or bioinformatics-derived restraints or novel structural features to be included, e.g. novel ligands, prosthetic groups and post-translational/transcriptional modifications. The code and user guide can be downloaded at http://smog-server.org/smog2.

SMOG 2: A Versatile Software Package for Generating Structure-Based Models.

Directory of Open Access Journals (Sweden)

Jeffrey K Noel

2016-03-01

Full Text Available Molecular dynamics simulations with coarse-grained or simplified Hamiltonians have proven to be an effective means of capturing the functionally important long-time and large-length scale motions of proteins and RNAs. Originally developed in the context of protein folding, structure-based models (SBMs have since been extended to probe a diverse range of biomolecular processes, spanning from protein and RNA folding to functional transitions in molecular machines. The hallmark feature of a structure-based model is that part, or all, of the potential energy function is defined by a known structure. Within this general class of models, there exist many possible variations in resolution and energetic composition. SMOG 2 is a downloadable software package that reads user-designated structural information and user-defined energy definitions, in order to produce the files necessary to use SBMs with high performance molecular dynamics packages: GROMACS and NAMD. SMOG 2 is bundled with XML-formatted template files that define commonly used SBMs, and it can process template files that are altered according to the needs of each user. This computational infrastructure also allows for experimental or bioinformatics-derived restraints or novel structural features to be included, e.g. novel ligands, prosthetic groups and post-translational/transcriptional modifications. The code and user guide can be downloaded at http://smog-server.org/smog2.

A comparison of software programs to determine curie content

International Nuclear Information System (INIS)

Hansen, C.J.; Miller C.C.

1995-01-01

Commercial nuclear power plants have used various methods to determine the curie content of radwaste packages to comply with shipping and disposal regulations. Several computer software packages are available which can determine the curie content of a package based on the geometry of the package and the dose rate of the package provided a given source spectrum. This paper will compare three of the more commonly used software packages. A brief review of the selection and use of software programs at Diablo Canyon Power Plant for radwaste and radioactive material shipments will be provided. These software packages are the PAKRAD program by Bechtel (which utilizes EPRI DOSCON data), RAMSHP by WMG and MICROSHIELD by Grove Engineering. A comparison of the software packages in the calculation of curie content for a box of dry active waste and a cartridge filter will be presented. A summary of program limitations will also be provided

System software design for the CDF Silicon Vertex Detector

Energy Technology Data Exchange (ETDEWEB)

Tkaczyk, S. (Fermi National Accelerator Lab., Batavia, IL (United States)); Bailey, M. (Purdue Univ., Lafayette, IN (United States))

1991-11-01

An automated system for testing and performance evaluation of the CDF Silicon Vertex Detector (SVX) data acquisition electronics is described. The SVX data acquisition chain includes the Fastbus Sequencer and the Rabbit Crate Controller and Digitizers. The Sequencer is a programmable device for which we developed a high level assembly language. Diagnostic, calibration and data acquisition programs have been developed. A distributed software package was developed in order to operate the modules. The package includes programs written in assembly and Fortran languages that are executed concurrently on the SVX Sequencer modules and either a microvax or an SSP. Test software was included to assist technical personnel during the production and maintenance of the modules. Details of the design of different components of the package are reported.

System software design for the CDF Silicon Vertex Detector

International Nuclear Information System (INIS)

Tkaczyk, S.; Bailey, M.

1991-11-01

An automated system for testing and performance evaluation of the CDF Silicon Vertex Detector (SVX) data acquisition electronics is described. The SVX data acquisition chain includes the Fastbus Sequencer and the Rabbit Crate Controller and Digitizers. The Sequencer is a programmable device for which we developed a high level assembly language. Diagnostic, calibration and data acquisition programs have been developed. A distributed software package was developed in order to operate the modules. The package includes programs written in assembly and Fortran languages that are executed concurrently on the SVX Sequencer modules and either a microvax or an SSP. Test software was included to assist technical personnel during the production and maintenance of the modules. Details of the design of different components of the package are reported

Integrated performance assessment model for waste policy package behavior and radionuclide release

International Nuclear Information System (INIS)

Kossik, R.; Miller, I.; Cunnane, M.

1992-01-01

Golder Associates Inc. (GAI) has developed a probabilistic total system performance assessment and strategy evaluation model (RIP) which can be applied in an iterative manner to evaluate repository site suitability and guide site characterization. This paper describes one component of the RIP software, the waste package behavior and radionuclide release model. The waste package component model considers waste package failure by various modes, matrix alteration/dissolution, and radionuclide mass transfer. Model parameters can be described as functions of local environmental conditions. The waste package component model is coupled to component models for far-field radionuclide transport and disruptive events. The model has recently been applied to the proposed repository at Yucca Mountain

Integrating Usability Evaluations into the Software Development Process

DEFF Research Database (Denmark)

Lizano, Fulvio

as relevant and strategic human–computer interaction (HCI) activities in the software development process, there are obstacles that limit the complete, effective and efficient integration of this kind of testing into the software development process. Two main obstacles are the cost of usability evaluations...... and the software developers' resistance to accepting users’ opinions regarding the lack of usability in their software systems. The ‘cost obstacle’ refers to the constraint of conducting usability evaluations in the software process due to the significant amount of resources required by this type of testing. Some......This thesis addresses the integration of usability evaluations into the software development process. The integration here is contextualized in terms of how to include usability evaluation as an activity in the software development lifecycle. Even though usability evaluations are considered...

Modern software approaches applied to a Hydrological model: the GEOtop Open-Source Software Project

Science.gov (United States)

Cozzini, Stefano; Endrizzi, Stefano; Cordano, Emanuele; Bertoldi, Giacomo; Dall'Amico, Matteo

2017-04-01

The GEOtop hydrological scientific package is an integrated hydrological model that simulates the heat and water budgets at and below the soil surface. It describes the three-dimensional water flow in the soil and the energy exchange with the atmosphere, considering the radiative and turbulent fluxes. Furthermore, it reproduces the highly non-linear interactions between the water and energy balance during soil freezing and thawing, and simulates the temporal evolution of snow cover, soil temperature and moisture. The core components of the package were presented in the 2.0 version (Endrizzi et al, 2014), which was released as Free Software Open-source project. However, despite the high scientific quality of the project, a modern software engineering approach was still missing. Such weakness hindered its scientific potential and its use both as a standalone package and, more importantly, in an integrate way with other hydrological software tools. In this contribution we present our recent software re-engineering efforts to create a robust and stable scientific software package open to the hydrological community, easily usable by researchers and experts, and interoperable with other packages. The activity takes as a starting point the 2.0 version, scientifically tested and published. This version, together with several test cases based on recent published or available GEOtop applications (Cordano and Rigon, 2013, WRR, Kollet et al, 2016, WRR) provides the baseline code and a certain number of referenced results as benchmark. Comparison and scientific validation can then be performed for each software re-engineering activity performed on the package. To keep track of any single change the package is published on its own github repository geotopmodel.github.io/geotop/ under GPL v3.0 license. A Continuous Integration mechanism by means of Travis-CI has been enabled on the github repository on master and main development branches. The usage of CMake configuration tool

Evaluating the impacts of packaging policy in The Netherlands

NARCIS (Netherlands)

Rouw, M.; Worrell, E.

2011-01-01

Packaging materials are one of the largest contributors to municipal solid waste production. This paper evaluates the material impacts packaging policy in The Netherlands in the period 1986–2007. Five different voluntary agreements were implemented over this period to reduce the environmental impact

Trend Monitoring System (TMS) graphics software

Science.gov (United States)

Brown, J. S.

1979-01-01

A prototype bus communications systems, which is being used to support the Trend Monitoring System (TMS) and to evaluate the bus concept is considered. A set of FORTRAN-callable graphics subroutines for the host MODCOMP comuter, and an approach to splitting graphics work between the host and the system's intelligent graphics terminals are described. The graphics software in the MODCOMP and the operating software package written for the graphics terminals are included.

Modified Hazard Ranking System/Hazard Ranking System for sites with mixed radioactive and hazardous wastes: Software documentation

Energy Technology Data Exchange (ETDEWEB)

Stenner, R.D.; Peloquin, R.A.; Hawley, K.A.

1986-11-01

The mHRS/HRS software package was developed by the Pacific Northwest Laboratory (PNL) under contract with the Department of Energy (DOE) to provide a uniform method for DOE facilities to use in performing their Conservation Environmental Response Compensation and Liability Act (CERCLA) Phase I Modified Hazard Ranking System or Hazard Ranking System evaluations. The program is designed to remove the tedium and potential for error associated with the performing of hand calculations and the interpreting of information on tables and in reference books when performing an evaluation. The software package is designed to operate on a microcomputer (IBM PC, PC/XT, or PC/AT, or a compatible system) using either a dual floppy disk drive or a hard disk storage system. It is written in the dBASE III language and operates using the dBASE III system. Although the mHRS/HRS software package was developed for use at DOE facilities, it has direct applicability to the performing of CERCLA Phase I evaluations for any facility contaminated by hazardous waste. The software can perform evaluations using either the modified hazard ranking system methodology developed by DOE/PNL, the hazard ranking system methodology developed by EPA/MITRE Corp., or a combination of the two. This document is a companion manual to the mHRS/HRS user manual. It is intended for the programmer who must maintain the software package and for those interested in the computer implementation. This manual documents the system logic, computer programs, and data files that comprise the package. Hardware and software implementation requirements are discussed. In addition, hand calculations of three sample situations (problems) with associated computer runs used for the verification of program calculations are included.

Modified Hazard Ranking System/Hazard Ranking System for sites with mixed radioactive and hazardous wastes: Software documentation

International Nuclear Information System (INIS)

Stenner, R.D.; Peloquin, R.A.; Hawley, K.A.

1986-11-01

The mHRS/HRS software package was developed by the Pacific Northwest Laboratory (PNL) under contract with the Department of Energy (DOE) to provide a uniform method for DOE facilities to use in performing their Conservation Environmental Response Compensation and Liability Act (CERCLA) Phase I Modified Hazard Ranking System or Hazard Ranking System evaluations. The program is designed to remove the tedium and potential for error associated with the performing of hand calculations and the interpreting of information on tables and in reference books when performing an evaluation. The software package is designed to operate on a microcomputer (IBM PC, PC/XT, or PC/AT, or a compatible system) using either a dual floppy disk drive or a hard disk storage system. It is written in the dBASE III language and operates using the dBASE III system. Although the mHRS/HRS software package was developed for use at DOE facilities, it has direct applicability to the performing of CERCLA Phase I evaluations for any facility contaminated by hazardous waste. The software can perform evaluations using either the modified hazard ranking system methodology developed by DOE/PNL, the hazard ranking system methodology developed by EPA/MITRE Corp., or a combination of the two. This document is a companion manual to the mHRS/HRS user manual. It is intended for the programmer who must maintain the software package and for those interested in the computer implementation. This manual documents the system logic, computer programs, and data files that comprise the package. Hardware and software implementation requirements are discussed. In addition, hand calculations of three sample situations (problems) with associated computer runs used for the verification of program calculations are included

Safety Evaluation for Packaging (onsite) T Plant Canyon Items

International Nuclear Information System (INIS)

OBRIEN, J.H.

2000-01-01

This safety evaluation for packaging (SEP) evaluates and documents the ability to safely ship mostly unique inventories of miscellaneous T Plant canyon waste items (T-P Items) encountered during the canyon deck clean off campaign. In addition, this SEP addresses contaminated items and material that may be shipped in a strong tight package (STP). The shipments meet the criteria for onsite shipments as specified by Fluor Hanford in HNF-PRO-154, Responsibilities and Procedures for all Hazardous Material Shipments

Safety Evaluation for Packaging (onsite) T Plant Canyon Items

Energy Technology Data Exchange (ETDEWEB)

OBRIEN, J.H.

2000-07-14

This safety evaluation for packaging (SEP) evaluates and documents the ability to safely ship mostly unique inventories of miscellaneous T Plant canyon waste items (T-P Items) encountered during the canyon deck clean off campaign. In addition, this SEP addresses contaminated items and material that may be shipped in a strong tight package (STP). The shipments meet the criteria for onsite shipments as specified by Fluor Hanford in HNF-PRO-154, Responsibilities and Procedures for all Hazardous Material Shipments.

The last developments of the airGR R-package, an open source software for rainfall-runoff modelling

Science.gov (United States)

Thirel, Guillaume; Delaigue, Olivier; Coron, Laurent; Perrin, Charles; Andréassian, Vazken

2017-04-01

Lumped hydrological models are useful and convenient tools for research, engineering and educational purposes. They propose catchment-scale representations of the precipitation-discharge relationship. Thanks to their limited data requirements, they can be easily implemented and run. With such models, it is possible to simulate a number of hydrological key processes over the catchment with limited structural and parametric complexity, typically evapotranspiration, runoff, underground losses, etc. The Hydrology Group at Irstea (Antony) has been developing a suite of rainfall-runoff models over the past 30 years with the main objectives of designing models as efficient as possible in terms of streamflow simulation, applicable to a wide range of catchments and having low data requirements. This resulted in a suite of models running at different time steps (from hourly to annual) applicable for various issues including water balance estimation, forecasting, simulation of impacts and scenario testing. Recently, Irstea has developed an easy-to-use R-package (R Core Team, 2016), called airGR (Coron et al., 2016, 2017), to make these models widely available. It includes: - the water balance annual GR1A model, - the monthly GR2M model, - three versions of the daily model, namely GR4J, GR5J and GR6J, - the hourly GR4H model, - a degree-day snow model CemaNeige. The airGR package has been designed to facilitate the use by non-expert users and allow the addition of evaluation criteria, models or calibration algorithm selected by the end-user. Each model core is coded in FORTRAN to ensure low computational time. The other package functions (i.e. mainly the calibration algorithm and the efficiency criteria) are coded in R. The package is also used for educational purposes. It allows for convenient implementation of model inter-comparisons and large sample hydrology experiments. The airGR package undergoes continuous developments for improving the efficiency, computational time

Guidelines for the verification and validation of expert system software and conventional software. Volume 7, User's manual: Final report

International Nuclear Information System (INIS)

Miller, L.A.; Hayes, J.E.; Mirsky, S.M.

1995-05-01

Reliable software is required for nuclear power industry applications. Verification and validation techniques applied during the software development process can help eliminate errors that could inhibit the proper operation of digital systems and cause availability and safety problems. Most of the techniques described in this report are valid for conventional software systems as well as for expert systems. The project resulted in a set of 16 V ampersand V guideline packages and 11 sets of procedures based on the class, development phase, and system component being tested. These guideline packages and procedures help a utility define the level of V ampersand V, which involves evaluating the complexity and type of software component along with the consequences of failure. In all, the project identified 153 V ampersand V techniques for conventional software systems and demonstrated their application to all aspects of expert systems except for the knowledge base, which requires specially developed tools. Each of these conventional techniques covers anywhere from 2-52 total types of conventional software defects, and each defect is covered by 21-50 V ampersand V techniques. The project also identified automated tools to Support V ampersand V activities

Software needs engineering - a position paper

OpenAIRE

GRIMSON, JANE BARCLAY

2000-01-01

PUBLISHED When the general press refers to `software' in its headlines, then this is often not to relate a success story, but to expand on yet another `software-risk-turned-problem-story'. For many people, the term `software' evokes the image of an application package running either on a PC or some similar stand-alone usage. Over 70% of all software, however, are not developed in the traditional software houses as part of the creation of such packages. Much of this software comes in the fo...

Petroleum software profiles

International Nuclear Information System (INIS)

Anon.

1996-01-01

A profile of twenty-two software packages designed for petroleum exploration and production was provided. Some focussed on the oil and gas engineering industry, and others on mapping systems containing well history files and well data summaries. Still other programs provided accounting systems designed to address the complexities of the oil and gas industry. The software packages reviewed were developed by some of the best-known groups involved in software development for the oil and gas industry, including among others, Geoquest, the Can Tek Group, Applied Terravision Systems Inc., Neotechnology Consultants Ltd., (12) OGCI Software Inc., Oracle Energy, Production Revenue Information Systems Management, Virtual Computing Services Ltd., and geoLogic Systems Ltd

ROLE OF DATA MINING CLASSIFICATION TECHNIQUE IN SOFTWARE DEFECT PREDICTION

OpenAIRE

Dr.A.R.Pon Periyasamy; Mrs A.Misbahulhuda

2017-01-01

Software defect prediction is the process of locating defective modules in software. Software quality may be a field of study and apply that describes the fascinating attributes of software package product. The performance should be excellent with none defects. Software quality metrics are a set of software package metrics that target the standard aspects of the product, process, and project. The software package defect prediction model helps in early detection of defects and contributes to t...

Speech to Text Software Evaluation Report

CERN Document Server

Martins Santo, Ana Luisa

2017-01-01

This document compares out-of-box performance of three commercially available speech recognition software: Vocapia VoxSigma TM , Google Cloud Speech, and Lime- craft Transcriber. It is defined a set of evaluation criteria and test methods for speech recognition softwares. The evaluation of these softwares in noisy environments are also included for the testing purposes. Recognition accuracy was compared using noisy environments and languages. Testing in ”ideal” non-noisy environment of a quiet room has been also performed for comparison.

Software for Evaluation of Conceptual Design

DEFF Research Database (Denmark)

Hartvig, Susanne C

1998-01-01

by the prototype, it addresses the requirements that the methods imply, and it explains the actual implementation of the prototype. Finally it discusses what have been learned from developing and testing the prototype. In this paper it is suggested, that a software tool which supports evaluation of design can...... be developed with a limited effort, and that such tools could support a structured evaluation process as opposed to no evaluation. Compared to manual evaluation, the introduced software based evaluation tool offers automation of tasks, such as performing assessments, when they are based on prior evaluations...

MAPPIX: A software package for off-line micro-pixe single particle aerosol analysis

International Nuclear Information System (INIS)

Ceccato, D.

2009-01-01

In the framework of a multiannual experiment performed at Baia Terra Nova, Antarctica, size-segregated aerosol samples were collected by using a 12-stage SDI impactor (Hillamo design). Approximately 2800 particles, belonging to the first four supermicrometric SDI stages - 8.39, 4.08, 2.68, 1.66 μm dynamic aerosol diameter cuts - were analyzed at the INFN-LNL micro-PIXE facility, a three lens Oxford Microprobe (OM) product, installed in the early nineties. Four regions on each of the 12 sub-samples were measured; 60 aerosol particles were detected on average in each of the analyzed regions. The off-line single aerosol particle (SAP) analysis of such big amount of data required software that is able to rapidly handle the acquired data, with a simple and fast area selection procedure; the subsequent automated PIXE spectra analysis with a specialized code was also needed. The MAPPIX 2.0 software was designed to make easier and faster the user jobs during the SAP analysis. The package is composed of two separate routines: the first one is devoted to data format conversion (OM-LMF file format to MAPPIX format), while the second one is devoted to micro-PIXE maps graphical presentation and aerosol particle selection procedure. The MAPPIX data format and software features will be discussed; a short report of the speed performances will be presented.

Image Fusion Technologies In Commercial Remote Sensing Packages

OpenAIRE

Al-Wassai, Firouz Abdullah; Kalyankar, N. V.

2013-01-01

Several remote sensing software packages are used to the explicit purpose of analyzing and visualizing remotely sensed data, with the developing of remote sensing sensor technologies from last ten years. Accord-ing to literature, the remote sensing is still the lack of software tools for effective information extraction from remote sensing data. So, this paper provides a state-of-art of multi-sensor image fusion technologies as well as review on the quality evaluation of the single image or f...

The Caviar software package for the astrometric reduction of Cassini ISS images: description and examples

Science.gov (United States)

Cooper, N. J.; Lainey, V.; Meunier, L.-E.; Murray, C. D.; Zhang, Q.-F.; Baillie, K.; Evans, M. W.; Thuillot, W.; Vienne, A.

2018-02-01

Aims: Caviar is a software package designed for the astrometric measurement of natural satellite positions in images taken using the Imaging Science Subsystem (ISS) of the Cassini spacecraft. Aspects of the structure, functionality, and use of the software are described, and examples are provided. The integrity of the software is demonstrated by generating new measurements of the positions of selected major satellites of Saturn, 2013-2016, along with their observed minus computed (O-C) residuals relative to published ephemerides. Methods: Satellite positions were estimated by fitting a model to the imaged limbs of the target satellites. Corrections to the nominal spacecraft pointing were computed using background star positions based on the UCAC5 and Tycho2 star catalogues. UCAC5 is currently used in preference to Gaia-DR1 because of the availability of proper motion information in UCAC5. Results: The Caviar package is available for free download. A total of 256 new astrometric observations of the Saturnian moons Mimas (44), Tethys (58), Dione (55), Rhea (33), Iapetus (63), and Hyperion (3) have been made, in addition to opportunistic detections of Pandora (20), Enceladus (4), Janus (2), and Helene (5), giving an overall total of 287 new detections. Mean observed-minus-computed residuals for the main moons relative to the JPL SAT375 ephemeris were - 0.66 ± 1.30 pixels in the line direction and 0.05 ± 1.47 pixels in the sample direction. Mean residuals relative to the IMCCE NOE-6-2015-MAIN-coorb2 ephemeris were -0.34 ± 0.91 pixels in the line direction and 0.15 ± 1.65 pixels in the sample direction. The reduced astrometric data are provided in the form of satellite positions for each image. The reference star positions are included in order to allow reprocessing at some later date using improved star catalogues, such as later releases of Gaia, without the need to re-estimate the imaged star positions. The Caviar software is available for free download from: ftp://ftp://ftp.imcce.fr/pub/softwares

A Re-Engineered Software Interface and Workflow for the Open-Source SimVascular Cardiovascular Modeling Package.

Science.gov (United States)

Lan, Hongzhi; Updegrove, Adam; Wilson, Nathan M; Maher, Gabriel D; Shadden, Shawn C; Marsden, Alison L

2018-02-01

Patient-specific simulation plays an important role in cardiovascular disease research, diagnosis, surgical planning and medical device design, as well as education in cardiovascular biomechanics. simvascular is an open-source software package encompassing an entire cardiovascular modeling and simulation pipeline from image segmentation, three-dimensional (3D) solid modeling, and mesh generation, to patient-specific simulation and analysis. SimVascular is widely used for cardiovascular basic science and clinical research as well as education, following increased adoption by users and development of a GATEWAY web portal to facilitate educational access. Initial efforts of the project focused on replacing commercial packages with open-source alternatives and adding increased functionality for multiscale modeling, fluid-structure interaction (FSI), and solid modeling operations. In this paper, we introduce a major SimVascular (SV) release that includes a new graphical user interface (GUI) designed to improve user experience. Additional improvements include enhanced data/project management, interactive tools to facilitate user interaction, new boundary condition (BC) functionality, plug-in mechanism to increase modularity, a new 3D segmentation tool, and new computer-aided design (CAD)-based solid modeling capabilities. Here, we focus on major changes to the software platform and outline features added in this new release. We also briefly describe our recent experiences using SimVascular in the classroom for bioengineering education.

Daylighting simulation : comparison of softwares for architect's utilization

Energy Technology Data Exchange (ETDEWEB)

Christakou, D.E.; Amorim, C.N.D. [Brazil Univ., Brasilia (Brazil). Faculty of Architecture and Urbanism

2005-07-01

This study analyzed and compared 4 daylighting software packages to determine the primary benefits and limits of each one, while considering the priorities for the use of the software by architects. The complex task of daylight simulation is an important step in designing buildings, particularly when the main objective is comfort and energy conservation. Simulation is not yet commonly practiced by professional architects because of the complexities of various software packages, the lack of user friendly interfaces and difficulty in interpreting results. The 4 software packages that were evaluated in this study were: (1) Desktop Radiance, (2) Rayfront, (3) Relux 2004 Vision, and (4) Lightscape. Criteria such as interfaces, flexibility, and help manuals were also analyzed in an effort to establish a frame of the main points to be considered when choosing daylighting software for architectural use, both in educational and office environments. Simulations of a test room were performed in which some parameters were modified to verify the performance of the following main criteria: flexibility in adapting to the architect's workflow; the use of state of the art algorithms; numerical precision; and, access possibility by Brazilian architects. The results demonstrate the potential of software's improvement, particular in terms of user interfaces and help manuals. The study showed that Relux 2004 Vision is the most adequate for architect's use. Rayfront and Desktop Radiance presented more difficulties in the design process, but Desktop Radiance had the advantage of being enclosed in AUTOCAD, a well known interface. Lightscape had a user friendly interface but was not as intuitive as Relux. It was concluded that the ideal daylighting simulation software does not yet exist. The ideal software should integrate diverse factors and combine edition and modeling tools beyond luminous evaluation and thermal consequences of daylight use. 5 refs., 3 tabs., 4 figs.

GENIE: a software package for gene-gene interaction analysis in genetic association studies using multiple GPU or CPU cores

Directory of Open Access Journals (Sweden)

Wang Kai

2011-05-01

Full Text Available Abstract Background Gene-gene interaction in genetic association studies is computationally intensive when a large number of SNPs are involved. Most of the latest Central Processing Units (CPUs have multiple cores, whereas Graphics Processing Units (GPUs also have hundreds of cores and have been recently used to implement faster scientific software. However, currently there are no genetic analysis software packages that allow users to fully utilize the computing power of these multi-core devices for genetic interaction analysis for binary traits. Findings Here we present a novel software package GENIE, which utilizes the power of multiple GPU or CPU processor cores to parallelize the interaction analysis. GENIE reads an entire genetic association study dataset into memory and partitions the dataset into fragments with non-overlapping sets of SNPs. For each fragment, GENIE analyzes: 1 the interaction of SNPs within it in parallel, and 2 the interaction between the SNPs of the current fragment and other fragments in parallel. We tested GENIE on a large-scale candidate gene study on high-density lipoprotein cholesterol. Using an NVIDIA Tesla C1060 graphics card, the GPU mode of GENIE achieves a speedup of 27 times over its single-core CPU mode run. Conclusions GENIE is open-source, economical, user-friendly, and scalable. Since the computing power and memory capacity of graphics cards are increasing rapidly while their cost is going down, we anticipate that GENIE will achieve greater speedups with faster GPU cards. Documentation, source code, and precompiled binaries can be downloaded from http://www.cceb.upenn.edu/~mli/software/GENIE/.

Safety evaluation for packaging (onsite) SERF cask

International Nuclear Information System (INIS)

Edwards, W.S.

1997-01-01

This safety evaluation for packaging (SEP) documents the ability of the Special Environmental Radiometallurgy Facility (SERF) Cask to meet the requirements of WHC-CM-2-14, Hazardous Material Packaging and Shipping, for transfer of Type B quantities (up to highway route controlled quantities) of radioactive material within the 300 Area of the Hanford Site. This document shall be used to ensure that loading, tie down, transport, and unloading of the SERF Cask are performed in accordance with WHC-CM-2-14. This SEP is valid until October 1, 1999. After this date, an update or upgrade to this document is required

A Review of Predictive Software for the Design of Community Microgrids

Directory of Open Access Journals (Sweden)

Mina Rahimian

2018-01-01

Full Text Available This paper discusses adding a spatial dimension to the design of community microgrid projects in the interest of expanding the existing discourse related to energy performance optimization measures. A multidimensional vision for designing community microgrids with higher energy performance is considered, leveraging urban form (superstructure to understand how it impacts the performance of the system’s distributed energy resources and loads (infrastructure. This vision engages the design sector in the technical conversation of developing community microgrids, leading to energy efficient designs of microgrid-connected communities well before their construction. A new generation of computational modeling and simulation tools that address this interaction are required. In order to position the research, this paper presents a survey of existing software packages, belonging to two distinct categories of modeling, simulation, and evaluation of community microgrids: the energy infrastructure modeling and the urban superstructure energy modeling. Results of this software survey identify a lack in software tools and simulation packages that simultaneously address the necessary interaction between the superstructure and infrastructure of community microgrids, given the importance of its study. Conclusions represent how a proposed experimental software prototype may fill an existing gap in current related software packages.

Evaluation of selected environmental decision support software

International Nuclear Information System (INIS)

Sullivan, T.M.; Moskowitz, P.D.; Gitten, M.

1997-06-01

Decision Support Software (DSS) continues to be developed to support analysis of decisions pertaining to environmental management. Decision support systems are computer-based systems that facilitate the use of data, models, and structured decision processes in decision making. The optimal DSS should attempt to integrate, analyze, and present environmental information to remediation project managers in order to select cost-effective cleanup strategies. The optimal system should have a balance between the sophistication needed to address the wide range of complicated sites and site conditions present at DOE facilities, and ease of use (e.g., the system should not require data that is typically unknown and should have robust error checking of problem definition through input, etc.). In the first phase of this study, an extensive review of the literature, the Internet, and discussions with sponsors and developers of DSS led to identification of approximately fifty software packages that met the preceding definition

Evaluation of trade-offs in costs and environmental impacts for returnable packaging implementation

Science.gov (United States)

Jarupan, Lerpong; Kamarthi, Sagar V.; Gupta, Surendra M.

2004-02-01

The main thrust of returnable packaging these days is to provide logistical services through transportation and distribution of products and be environmentally friendly. Returnable packaging and reverse logistics concepts have converged to mitigate the adverse effect of packaging materials entering the solid waste stream. Returnable packaging must be designed by considering the trade-offs between costs and environmental impact to satisfy manufacturers and environmentalists alike. The cost of returnable packaging entails such items as materials, manufacturing, collection, storage and disposal. Environmental impacts are explicitly linked with solid waste, air pollution, and water pollution. This paper presents a multi-criteria evaluation technique to assist decision-makers for evaluating the trade-offs in costs and environmental impact during the returnable packaging design process. The proposed evaluation technique involves a combination of multiple objective integer linear programming and analytic hierarchy process. A numerical example is used to illustrate the methodology.

78 FR 26090 - Content Specifications and Shielding Evaluations for Type B Transportation Packages

Science.gov (United States)

2013-05-03

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0270] Content Specifications and Shielding Evaluations for...) 2013-04, ``Content Specifications and Shielding Evaluations for Type B Transportation Packages.'' This... Packages for Radioactive Material,'' for the review of content specifications and shielding evaluations...

Counting radon tracks in Makrofol detectors with the 'image reduction and analysis facility' (IRAF) software package

International Nuclear Information System (INIS)

Hernandez, F.; Gonzalez-Manrique, S.; Karlsson, L.; Hernandez-Armas, J.; Aparicio, A.

2007-01-01

Makrofol detectors are commonly used for long-term radon ( 222 Rn) measurements in houses, schools and workplaces. The use of this type of passive detectors for the determination of radon concentrations requires the counting of the nuclear tracks produced by alpha particles on the detecting material. The 'image reduction and analysis facility' (IRAF) software package is a piece of software commonly used in astronomical applications. It allows detailed counting and mapping of sky sections where stars are grouped very closely, even forming clusters. In order to count the nuclear tracks in our Makrofol radon detectors, we have developed an inter-disciplinary application that takes advantage of the similitude that exist between counting stars in a dark sky and tracks in a track-etch detector. Thus, a low cost semi-automatic system has been set up in our laboratory which utilises a commercially available desktop scanner and the IRAF software package. A detailed description of the proposed semi-automatic method and its performance, in comparison to ocular counting, is described in detail here. In addition, the calibration factor for this procedure, 2.97+/-0.07kBqm -3 htrack -1 cm 2 , has been calculated based on the results obtained from exposing 46 detectors to certified radon concentrations. Furthermore, the results of a preliminary radon survey carried out in 62 schools in Tenerife island (Spain), using Makrofol detectors, counted with the mentioned procedure, are briefly presented. The results reported here indicate that the developed procedure permits a fast, accurate and unbiased determination of the radon tracks in a large number of detectors. The measurements carried out in the schools showed that the radon concentrations in at least 12 schools were above 200Bqm -3 and, in two of them, above 400Bqm -3 . Further studies should be performed at those schools following the European Union recommendations about radon concentrations in buildings

A quantitative calculation for software reliability evaluation

Energy Technology Data Exchange (ETDEWEB)

Lee, Young-Jun; Lee, Jang-Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

To meet these regulatory requirements, the software used in the nuclear safety field has been ensured through the development, validation, safety analysis, and quality assurance activities throughout the entire process life cycle from the planning phase to the installation phase. A variety of activities, such as the quality assurance activities are also required to improve the quality of a software. However, there are limitations to ensure that the quality is improved enough. Therefore, the effort to calculate the reliability of the software continues for a quantitative evaluation instead of a qualitative evaluation. In this paper, we propose a quantitative calculation method for the software to be used for a specific operation of the digital controller in an NPP. After injecting random faults in the internal space of a developed controller and calculating the ability to detect the injected faults using diagnostic software, we can evaluate the software reliability of a digital controller in an NPP. We tried to calculate the software reliability of the controller in an NPP using a new method that differs from a traditional method. It calculates the fault detection coverage after injecting the faults into the software memory space rather than the activity through the life cycle process. We attempt differentiation by creating a new definition of the fault, imitating the software fault using the hardware, and giving a consideration and weights for injection faults.

The portability of the "Electronics Workbench" simulation software to China

NARCIS (Netherlands)

Collis, Betty; Zhi-Cheng, Dong

1993-01-01

This article discusses the portability of the Canadian-made simulation software package, "Electronic Workbench" package (EWB) to China. As part of a larger project investigating the portability of various educational software packages, the EWB package was used in electronics instruction in China and

Software engineering the mixed model for genome-wide association studies on large samples.

Science.gov (United States)

Zhang, Zhiwu; Buckler, Edward S; Casstevens, Terry M; Bradbury, Peter J

2009-11-01

Mixed models improve the ability to detect phenotype-genotype associations in the presence of population stratification and multiple levels of relatedness in genome-wide association studies (GWAS), but for large data sets the resource consumption becomes impractical. At the same time, the sample size and number of markers used for GWAS is increasing dramatically, resulting in greater statistical power to detect those associations. The use of mixed models with increasingly large data sets depends on the availability of software for analyzing those models. While multiple software packages implement the mixed model method, no single package provides the best combination of fast computation, ability to handle large samples, flexible modeling and ease of use. Key elements of association analysis with mixed models are reviewed, including modeling phenotype-genotype associations using mixed models, population stratification, kinship and its estimation, variance component estimation, use of best linear unbiased predictors or residuals in place of raw phenotype, improving efficiency and software-user interaction. The available software packages are evaluated, and suggestions made for future software development.

Gamma-Ray Spectrum Analysis Software GDA

International Nuclear Information System (INIS)

Wanabongse, P.

1998-01-01

The developmental work on computer software for gamma-ray spectrum analysis has been completed as a software package version 1.02 named GDA, which is an acronym for Gamma-spectrum Deconvolution and Analysis. The software package consists of three 3.5-inch diskettes for setup and a user's manual. GDA software can be installed for using on a personal computer with Windows 95 or Windows NT 4.0 operating system. A computer maybe the type of 80486 CPU with 8 megabytes of memory

A menu-driven software package of Bayesian nonparametric (and parametric) mixed models for regression analysis and density estimation.

Science.gov (United States)

Karabatsos, George

2017-02-01

Most of applied statistics involves regression analysis of data. In practice, it is important to specify a regression model that has minimal assumptions which are not violated by data, to ensure that statistical inferences from the model are informative and not misleading. This paper presents a stand-alone and menu-driven software package, Bayesian Regression: Nonparametric and Parametric Models, constructed from MATLAB Compiler. Currently, this package gives the user a choice from 83 Bayesian models for data analysis. They include 47 Bayesian nonparametric (BNP) infinite-mixture regression models; 5 BNP infinite-mixture models for density estimation; and 31 normal random effects models (HLMs), including normal linear models. Each of the 78 regression models handles either a continuous, binary, or ordinal dependent variable, and can handle multi-level (grouped) data. All 83 Bayesian models can handle the analysis of weighted observations (e.g., for meta-analysis), and the analysis of left-censored, right-censored, and/or interval-censored data. Each BNP infinite-mixture model has a mixture distribution assigned one of various BNP prior distributions, including priors defined by either the Dirichlet process, Pitman-Yor process (including the normalized stable process), beta (two-parameter) process, normalized inverse-Gaussian process, geometric weights prior, dependent Dirichlet process, or the dependent infinite-probits prior. The software user can mouse-click to select a Bayesian model and perform data analysis via Markov chain Monte Carlo (MCMC) sampling. After the sampling completes, the software automatically opens text output that reports MCMC-based estimates of the model's posterior distribution and model predictive fit to the data. Additional text and/or graphical output can be generated by mouse-clicking other menu options. This includes output of MCMC convergence analyses, and estimates of the model's posterior predictive distribution, for selected

How to evaluate multichannel communication packages: a case study on mortgage information

NARCIS (Netherlands)

Herijgers, M.L.C.; Pander Maat, H.L.W.

2015-01-01

Complex decision-making is often supported not by single messages but by multichannel communication packages that need to be evaluated in their own right. The purpose of this paper is to present a new analytic approach to this package evaluation task combining textual analysis, functionalanalysis

Integrated software system for low level waste management

International Nuclear Information System (INIS)

Worku, G.

1995-01-01

In the continually changing and uncertain world of low level waste management, many generators in the US are faced with the prospect of having to store their waste on site for the indefinite future. This consequently increases the set of tasks performed by the generators in the areas of packaging, characterizing, classifying, screening (if a set of acceptance criteria applies), and managing the inventory for the duration of onsite storage. When disposal sites become available, it is expected that the work will require re-evaluating the waste packages, including possible re-processing, re-packaging, or re-classifying in preparation for shipment for disposal under the regulatory requirements of the time. In this day and age, when there is wide use of computers and computer literacy is at high levels, an important waste management tool would be an integrated software system that aids waste management personnel in conducting these tasks quickly and accurately. It has become evident that such an integrated radwaste management software system offers great benefits to radwaste generators both in the US and other countries. This paper discusses one such approach to integrated radwaste management utilizing some globally accepted radiological assessment software applications

A CRITICAL STUDY AND COMPARISON OF MANUFACTURING SIMULATION SOFTWARES USING ANALYTIC HIERARCHY PROCESS

Directory of Open Access Journals (Sweden)

ASHU GUPTA

2010-03-01

Full Text Available In a period of continuous change in global business environment, organizations, large and small, are finding it increasingly difficult to deal with, and adjust to the demands for such change. Simulation is a powerful tool for allowing designers imagines new systems and enabling them to both quantify and observe behavior. Currently the market offers a variety of simulation software packages. Some are less expensive than others. Some are generic and can be used in a wide variety of application areas while others are more specific. Some have powerful features for modeling while others provide only basic features. Modeling approaches and strategies are different for different packages. Companies are seeking advice about the desirable features of software for manufacturing simulation, depending on the purpose of its use. Because of this, the importance of an adequate approach to simulation software evaluation and comparison is apparent. This paper presents a critical evaluation of four widely used manufacturing simulators: NX-IDEAS, Star-CD, Micro Saint Sharp and ProModel. Following a review of research into simulation software evaluation, an evaluation and comparison of the above simulators is performed. This paper illustrates and assesses the role the Analytic Hierarchy Process (AHP played in simulation software evaluation and selection. The main purpose of this evaluation and comparison is to discover the suitability of certain types of simulators for particular purposes.

PIV/HPIV Film Analysis Software Package

Science.gov (United States)

Blackshire, James L.

1997-01-01

A PIV/HPIV film analysis software system was developed that calculates the 2-dimensional spatial autocorrelations of subregions of Particle Image Velocimetry (PIV) or Holographic Particle Image Velocimetry (HPIV) film recordings. The software controls three hardware subsystems including (1) a Kodak Megaplus 1.4 camera and EPIX 4MEG framegrabber subsystem, (2) an IEEE/Unidex 11 precision motion control subsystem, and (3) an Alacron I860 array processor subsystem. The software runs on an IBM PC/AT host computer running either the Microsoft Windows 3.1 or Windows 95 operating system. It is capable of processing five PIV or HPIV displacement vectors per second, and is completely automated with the exception of user input to a configuration file prior to analysis execution for update of various system parameters.

Dose - a software package for the calculation of integrated exposure resulting from an accident in a nuclear power plant

International Nuclear Information System (INIS)

Doron, E.; Ohaion, H.; Asculai, E.

1985-05-01

A software package intended for the assessments of risks resulting from accidental release of radioactive materials from a nuclear power plant is presented. The models and the various programs based on them, are described. The work includes detailed operating instructions for the various programs, as well as instructions for the preparation of the necessary input data. Various options are described for additions and changes to the programs with the aim of extending their usefulness to more general cases from the aspects of meteorology and pollution sources. finally, a sample calculation that enables the user to test the proper functioning of the whole package, as well as his own proficiency in its use, is given. (author)

ATLAS software configuration and build tool optimisation

Science.gov (United States)

Rybkin, Grigory; Atlas Collaboration

2014-06-01

ATLAS software code base is over 6 million lines organised in about 2000 packages. It makes use of some 100 external software packages, is developed by more than 400 developers and used by more than 2500 physicists from over 200 universities and laboratories in 6 continents. To meet the challenge of configuration and building of this software, the Configuration Management Tool (CMT) is used. CMT expects each package to describe its build targets, build and environment setup parameters, dependencies on other packages in a text file called requirements, and each project (group of packages) to describe its policies and dependencies on other projects in a text project file. Based on the effective set of configuration parameters read from the requirements files of dependent packages and project files, CMT commands build the packages, generate the environment for their use, or query the packages. The main focus was on build time performance that was optimised within several approaches: reduction of the number of reads of requirements files that are now read once per package by a CMT build command that generates cached requirements files for subsequent CMT build commands; introduction of more fine-grained build parallelism at package task level, i.e., dependent applications and libraries are compiled in parallel; code optimisation of CMT commands used for build; introduction of package level build parallelism, i. e., parallelise the build of independent packages. By default, CMT launches NUMBER-OF-PROCESSORS build commands in parallel. The other focus was on CMT commands optimisation in general that made them approximately 2 times faster. CMT can generate a cached requirements file for the environment setup command, which is especially useful for deployment on distributed file systems like AFS or CERN VMFS. The use of parallelism, caching and code optimisation significantly-by several times-reduced software build time, environment setup time, increased the efficiency of

SIMSAS - a window based software package for simulation and analysis of multiple small-angle scattering data

International Nuclear Information System (INIS)

Jayaswal, B.; Mazumder, S.

1998-09-01

Small-angle scattering data from strong scattering systems, e.g. porous materials, cannot be analysed invoking single scattering approximation as specimen needed to replicate the bulk matrix in essential properties are too thick to validate the approximation. The presence of multiple scattering is indicated by invalidity of the functional invariance property of the observed scattering profile with variation of sample thickness and/or wave length of the probing radiation. This article delineates how non accounting of multiple scattering affects the results of analysis and then how to correct the data for its effect. It deals with an algorithm to extract single scattering profile from small-angle scattering data affected by multiple scattering. The algorithm can process the scattering data and deduce single scattering profile in absolute scale. A software package, SIMSAS, is introduced for executing this inversion step. This package is useful both to simulate and to analyse multiple small-angle scattering data. (author)

Software vulnerability: Definition, modelling, and practical evaluation for E-mail: transfer software

International Nuclear Information System (INIS)

Kimura, Mitsuhiro

2006-01-01

This paper proposes a method of assessing software vulnerability quantitatively. By expanding the concept of the IPO (input-program-output) model, we first define the software vulnerability and construct a stochastic model. Then we evaluate the software vulnerability of the sendmail system by analyzing the actual security-hole data, which were collected from its release note. Also we show the relationship between the estimated software reliability and vulnerability of the analyzed system

Presenting an Evaluation Model for the Cancer Registry Software.

Science.gov (United States)

Moghaddasi, Hamid; Asadi, Farkhondeh; Rabiei, Reza; Rahimi, Farough; Shahbodaghi, Reihaneh

2017-12-01

As cancer is increasingly growing, cancer registry is of great importance as the main core of cancer control programs, and many different software has been designed for this purpose. Therefore, establishing a comprehensive evaluation model is essential to evaluate and compare a wide range of such software. In this study, the criteria of the cancer registry software have been determined by studying the documents and two functional software of this field. The evaluation tool was a checklist and in order to validate the model, this checklist was presented to experts in the form of a questionnaire. To analyze the results of validation, an agreed coefficient of %75 was determined in order to apply changes. Finally, when the model was approved, the final version of the evaluation model for the cancer registry software was presented. The evaluation model of this study contains tool and method of evaluation. The evaluation tool is a checklist including the general and specific criteria of the cancer registry software along with their sub-criteria. The evaluation method of this study was chosen as a criteria-based evaluation method based on the findings. The model of this study encompasses various dimensions of cancer registry software and a proper method for evaluating it. The strong point of this evaluation model is the separation between general criteria and the specific ones, while trying to fulfill the comprehensiveness of the criteria. Since this model has been validated, it can be used as a standard to evaluate the cancer registry software.

A software program for exchanging MR data

DEFF Research Database (Denmark)

Ring, P B; Jensen, J A; Henriksen, O

1993-01-01

of digital MR images of the human brain. Because there was no common data format, software package was developed for data exchange. This article describes the basic features of the developed software. The software package was written in the language of C and was successfully tested on an IBM-6150 UNIX...... workstation. The software is currently being tested on the following series of UNIX workstations: SUN SPARC, IBM RS6000, and HP 9000/700....

Evaluations of UltraiQ software for objective ultrasound image quality assessment using images from a commercial scanner.

Science.gov (United States)

Long, Zaiyang; Tradup, Donald J; Stekel, Scott F; Gorny, Krzysztof R; Hangiandreou, Nicholas J

2018-03-01

We evaluated a commercially available software package that uses B-mode images to semi-automatically measure quantitative metrics of ultrasound image quality, such as contrast response, depth of penetration (DOP), and spatial resolution (lateral, axial, and elevational). Since measurement of elevational resolution is not a part of the software package, we achieved it by acquiring phantom images with transducers tilted at 45 degrees relative to the phantom. Each measurement was assessed in terms of measurement stability, sensitivity, repeatability, and semi-automated measurement success rate. All assessments were performed on a GE Logiq E9 ultrasound system with linear (9L or 11L), curved (C1-5), and sector (S1-5) transducers, using a CIRS model 040GSE phantom. In stability tests, the measurements of contrast, DOP, and spatial resolution remained within a ±10% variation threshold in 90%, 100%, and 69% of cases, respectively. In sensitivity tests, contrast, DOP, and spatial resolution measurements followed the expected behavior in 100%, 100%, and 72% of cases, respectively. In repeatability testing, intra- and inter-individual coefficients of variations were equal to or less than 3.2%, 1.3%, and 4.4% for contrast, DOP, and spatial resolution (lateral and axial), respectively. The coefficients of variation corresponding to the elevational resolution test were all within 9.5%. Overall, in our assessment, the evaluated package performed well for objective and quantitative assessment of the above-mentioned image qualities under well-controlled acquisition conditions. We are finding it to be useful for various clinical ultrasound applications including performance comparison between scanners from different vendors. © 2018 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

pyLIMA: An Open-source Package for Microlensing Modeling. I. Presentation of the Software and Analysis of Single-lens Models

Science.gov (United States)

Bachelet, E.; Norbury, M.; Bozza, V.; Street, R.

2017-11-01

Microlensing is a unique tool, capable of detecting the “cold” planets between ˜1 and 10 au from their host stars and even unbound “free-floating” planets. This regime has been poorly sampled to date owing to the limitations of alternative planet-finding methods, but a watershed in discoveries is anticipated in the near future thanks to the planned microlensing surveys of WFIRST-AFTA and Euclid's Extended Mission. Of the many challenges inherent in these missions, the modeling of microlensing events will be of primary importance, yet it is often time-consuming, complex, and perceived as a daunting barrier to participation in the field. The large scale of future survey data products will require thorough but efficient modeling software, but, unlike other areas of exoplanet research, microlensing currently lacks a publicly available, well-documented package to conduct this type of analysis. We present version 1.0 of the python Lightcurve Identification and Microlensing Analysis (pyLIMA). This software is written in Python and uses existing packages as much as possible to make it widely accessible. In this paper, we describe the overall architecture of the software and the core modules for modeling single-lens events. To verify the performance of this software, we use it to model both real data sets from events published in the literature and generated test data produced using pyLIMA's simulation module. The results demonstrate that pyLIMA is an efficient tool for microlensing modeling. We will expand pyLIMA to consider more complex phenomena in the following papers.

Evaluation of a fast and flexible OPC package: OPTISSIMO

Science.gov (United States)

Maurer, Wilhelm; Waas, Thomas; Eisenmann, Hans

1996-12-01

It is out of question, that current state-of-the-art lithography--printing 350 nm structures with i-line tools or 250 nm structures with DUV tools--needs to correct for proximity effects (OPC). Otherwise, all the well-known effects like line-end shortening, linewidth variation as a function of adjacent patterns, linewidth non-linearity, etc. will produce a pattern, that is significantly different from the intended design. In this paper, we report first evaluation results of OPTISSIMO, a software package for automatic proximity correction. Besides the ability to handle full-chip designs by preserving as much as possible of the original data-hierarchy, there are significant options for the user. A large number of choices can be made to balance between the precision of the correction and the complexity of the corrected design. The main target of our evaluations was to check for full-chip OPC for the gate level of a state-of-the-art design. This corresponds to print either linewidths in the 350 nm to 400 nm range with i-line lithography or 250 nm/300 nm linewidth with DUV lithography. Taking 400 nm i-line lithography as an example, 3% precision OPC which has been demonstrated. By using hierarchical data handling, it was shown, that even the data complexity of a 256 M DRAM can be managed within reasonable time.

CheMentor Software System by H. A. Peoples

Science.gov (United States)

Reid, Brian P.

1997-09-01

CheMentor Software System H. A. Peoples. Computerized Learning Enhancements: http://www.ecis.com/~clehap; email: clehap@ecis.com; 1996 - 1997. CheMentor is a series of software packages for introductory-level chemistry, which includes Practice Items (I), Stoichiometry (I), Calculating Chemical Formulae, and the CheMentor Toolkit. The first three packages provide practice problems for students and various types of help to solve them; the Toolkit includes "calculators" for determining chemical quantities as well as the Practice Items (I) set of problems. The set of software packages is designed so that each individual product acts as a module of a common CheMentor program. As the name CheMentor implies, the software is designed as a "mentor" for students learning introductory chemistry concepts and problems. The typical use of the software would be by individual students (or perhaps small groups) as an adjunct to lectures. CheMentor is a HyperCard application and the modules are HyperCard stacks. The requirements to run the packages include a Macintosh computer with at least 1 MB of RAM, a hard drive with several MB of available space depending upon the packages selected (10 MB were required for all the packages reviewed here), and the Mac operating system 6.0.5 or later.

Comparison of computed tomography dose reporting software

International Nuclear Information System (INIS)

Abdullah, A.; Sun, Z.; Pongnapang, N.; Ng, K. H.

2008-01-01

Computed tomography (CT) dose reporting software facilitates the estimation of doses to patients undergoing CT examinations. In this study, comparison of three software packages, i.e. CT-Expo (version 1.5, Medizinische Hochschule, Hannover (Germany)), ImPACT CT Patients Dosimetry Calculator (version 0.99x, Imaging Performance Assessment on Computed Tomography, www.impactscan.org) and WinDose (version 2.1a, Wellhofer Dosimetry, Schwarzenbruck (Germany)), has been made in terms of their calculation algorithm and the results of calculated doses. Estimations were performed for head, chest, abdominal and pelvic examinations based on the protocols recommended by European guidelines using single-slice CT (SSCT) (Siemens Somatom Plus 4, Erlangen (Germany)) and multi-slice CT (MSCT) (Siemens Sensation 16, Erlangen (Germany)) for software-based female and male phantoms. The results showed that there are some differences in final dose reporting provided by these software packages. There are deviations of effective doses produced by these software packages. Percentages of coefficient of variance range from 3.3 to 23.4 % in SSCT and from 10.6 to 43.8 % in MSCT. It is important that researchers state the name of the software that is used to estimate the various CT dose quantities. Users must also understand the equivalent terminologies between the information obtained from the CT console and the software packages in order to use the software correctly. (authors)

Large Scale Software Building with CMake in ATLAS

Science.gov (United States)

Elmsheuser, J.; Krasznahorkay, A.; Obreshkov, E.; Undrus, A.; ATLAS Collaboration

2017-10-01

The offline software of the ATLAS experiment at the Large Hadron Collider (LHC) serves as the platform for detector data reconstruction, simulation and analysis. It is also used in the detector’s trigger system to select LHC collision events during data taking. The ATLAS offline software consists of several million lines of C++ and Python code organized in a modular design of more than 2000 specialized packages. Because of different workflows, many stable numbered releases are in parallel production use. To accommodate specific workflow requests, software patches with modified libraries are distributed on top of existing software releases on a daily basis. The different ATLAS software applications also require a flexible build system that strongly supports unit and integration tests. Within the last year this build system was migrated to CMake. A CMake configuration has been developed that allows one to easily set up and build the above mentioned software packages. This also makes it possible to develop and test new and modified packages on top of existing releases. The system also allows one to detect and execute partial rebuilds of the release based on single package changes. The build system makes use of CPack for building RPM packages out of the software releases, and CTest for running unit and integration tests. We report on the migration and integration of the ATLAS software to CMake and show working examples of this large scale project in production.

DEVELOPING EVALUATION INSTRUMENT FOR MATHEMATICS EDUCATIONAL SOFTWARE

Directory of Open Access Journals (Sweden)

Wahyu Setyaningrum

2012-02-01

Full Text Available The rapid increase and availability of mathematics software, either for classroom or individual learning activities, presents a challenge for teachers. It has been argued that many products are limited in quality. Some of the more commonly used software products have been criticized for poor content, activities which fail to address some learning issues, poor graphics presentation, inadequate documentation, and other technical problems. The challenge for schools is to ensure that the educational software used in classrooms is appropriate and effective in supporting intended outcomes and goals. This paper aimed to develop instrument for evaluating mathematics educational software in order to help teachers in selecting the appropriate software. The instrument considers the notion of educational including content, teaching and learning skill, interaction, and feedback and error correction; and technical aspects of educational software including design, clarity, assessment and documentation, cost and hardware and software interdependence. The instrument use a checklist approach, the easier and effective methods in assessing the quality of educational software, thus the user needs to put tick in each criteria. The criteria in this instrument are adapted and extended from standard evaluation instrument in several references.   Keywords: mathematics educational software, educational aspect, technical aspect.

The STARLINK software collection

Science.gov (United States)

Penny, A. J.; Wallace, P. T.; Sherman, J. C.; Terret, D. L.

1993-12-01

A demonstration will be given of some recent Starlink software. STARLINK is: a network of computers used by UK astronomers; a collection of programs for the calibration and analysis of astronomical data; a team of people giving hardware, software and administrative support. The Starlink Project has been in operation since 1980 to provide UK astronomers with interactive image processing and data reduction facilities. There are now Starlink computer systems at 25 UK locations, serving about 1500 registered users. The Starlink software collection now has about 25 major packages covering a wide range of astronomical data reduction and analysis techniques, as well as many smaller programs and utilities. At the core of most of the packages is a common `software environment', which provides many of the functions which applications need and offers standardized methods of structuring and accessing data. The software environment simplifies programming and support, and makes it easy to use different packages for different stages of the data reduction. Users see a consistent style, and can mix applications without hitting problems of differing data formats. The Project group coordinates the writing and distribution of this software collection, which is Unix based. Outside the UK, Starlink is used at a large number of places, which range from installations at major UK telescopes, which are Starlink-compatible and managed like Starlink sites, to individuals who run only small parts of the Starlink software collection.

A cross-validation package driving Netica with python

Science.gov (United States)

Fienen, Michael N.; Plant, Nathaniel G.

2014-01-01

Bayesian networks (BNs) are powerful tools for probabilistically simulating natural systems and emulating process models. Cross validation is a technique to avoid overfitting resulting from overly complex BNs. Overfitting reduces predictive skill. Cross-validation for BNs is known but rarely implemented due partly to a lack of software tools designed to work with available BN packages. CVNetica is open-source, written in Python, and extends the Netica software package to perform cross-validation and read, rebuild, and learn BNs from data. Insights gained from cross-validation and implications on prediction versus description are illustrated with: a data-driven oceanographic application; and a model-emulation application. These examples show that overfitting occurs when BNs become more complex than allowed by supporting data and overfitting incurs computational costs as well as causing a reduction in prediction skill. CVNetica evaluates overfitting using several complexity metrics (we used level of discretization) and its impact on performance metrics (we used skill).

Software refactoring at the package level using clustering techniques

KAUST Repository

Alkhalid, A.; Alshayeb, M.; Mahmoud, S. A.

2011-01-01

Enhancing, modifying or adapting the software to new requirements increases the internal software complexity. Software with high level of internal complexity is difficult to maintain. Software refactoring reduces software complexity and hence

Experiment to evaluate software safety

International Nuclear Information System (INIS)

Soubies, B.; Henry, J.Y.

1994-01-01

The process of licensing nuclear power plants for operation consists of mandatory steps featuring detailed examination of the instrumentation and control system by the safety authorities, including softwares. The criticality of these softwares obliges the manufacturer to develop in accordance with the IEC 880 standard 'Computer software in nuclear power plant safety systems' issued by the International Electronic Commission. The evaluation approach, a two-stage assessment is described in detail. In this context, the IPSN (Institute of Protection and Nuclear Safety), the technical support body of the safety authority uses the MALPAS tool to analyse the quality of the programs. (R.P.). 4 refs

Recommendations for preparing the criticality safety evaluation of transportation packages

International Nuclear Information System (INIS)

Dyer, H.R.; Parks, C.V.

1997-04-01

This report provides recommendations on preparing the criticality safety section of an application for approval of a transportation package containing fissile material. The analytical approach to the evaluation is emphasized rather than the performance standards that the package must meet. Where performance standards are addressed, this report incorporates the requirements of 10 CFR Part 71. 12 refs., 6 figs., 8 tabs

Safety evaluation for packaging (onsite) product removal can containers

International Nuclear Information System (INIS)

Burnside, M.E.

1998-01-01

Six Product Removal (PR) Cans and Containers are located within the Plutonium Finishing Plant. Each can is expected to contain a maximum of 3 g of residual radioactive material, consisting mainly of plutonium isotopes. The PR Can Containers were previously authorized by HNF-SD-TP-SEP-064, Rev. 0 (Boettger 1997), for the interarea transport of up to 3 g of plutonium. The purpose of this safety evaluation for packaging is to allow the transport of six PR Cans with their Containers from the Plutonium Finishing Plant to the 233 S Evaporator Facility. This safety evaluation for packaging is authorized for use until April 29, 1999, or until the shipment is made, whichever happens first

Hanford high-level waste melter system evaluation data packages

International Nuclear Information System (INIS)

Elliott, M.L.; Shafer, P.J.; Lamar, D.A.; Merrill, R.A.; Grunewald, W.; Roth, G.; Tobie, W.

1996-03-01

The Tank Waste Remediation System is selecting a reference melter system for the Hanford High-Level Waste vitrification plant. A melter evaluation was conducted in FY 1994 to narrow down the long list of potential melter technologies to a few for testing. A formal evaluation was performed by a Melter Selection Working Group (MSWG), which met in June and August 1994. At the June meeting, MSWG evaluated 15 technologies and selected six for more thorough evaluation at the Aug. meeting. All 6 were variations of joule-heated or induction-heated melters. Between the June and August meetings, Hanford site staff and consultants compiled data packages for each of the six melter technologies as well as variants of the baseline technologies. Information was solicited from melter candidate vendors to supplement existing information. This document contains the data packages compiled to provide background information to MSWG in support of the evaluation of the six technologies. (A separate evaluation was performed by Fluor Daniel, Inc. to identify balance of plant impacts if a given melter system was selected.)

Direct Integration: Training Software Developers to Conduct Usability Evaluations

DEFF Research Database (Denmark)

Skov, Mikael B.; Stage, Jan

2008-01-01

is based on an empirical study where 36 teams with a total of 234 first-year university students on software development and design educations were trained in a simple approach for user-based website usability testing that was taught in a 40 hour course. This approach supported them in planning, conducting......Many improvements of the interplay between usability evaluation and software development rely either on better methods for conducting usability evaluations or on better formats for presenting evaluation results in ways that are useful for software designers and developers. Both approaches involve...... a complete division of work between developers and evaluators, which is an undesirable complexity for many software development projects. This paper takes a different approach by exploring to what extent software developers and designers can be trained to carry out their own usability evaluations. The paper...

Review of the Educational Software Evaluation Forms and Scales

Directory of Open Access Journals (Sweden)

Ahmet ARSLAN

2016-12-01

Full Text Available The main purpose of this study is to review existing evaluation forms and scales that have been prepared for educational software evaluation. In addition to this purpose, the study aims to provide insight and guidance for future studies in this context. In total, forty-two studies that including evaluation forms and scales have been taken into consideration. “Educational software evaluation”, “Software evaluation”, “Educational software evaluation forms/scales” were searched as keywords in the: “Education Resources Information Centre (ERIC”, “Marmara University e-Library”, “National Thesis Center” and “Science Direct” databases. Twenty-nine of them have met the review selection criteria and been evaluated. There is an increase in the number of evaluation tools between 2006 – 2010. However, it was noticed that there is no sufficient number of evaluation tools targeting “educational games”. It was concluded that reliability and validity studies are very important part of developing educational software evaluation tools and this is a matter that should be considered in future studies.

Safety Analysis Report - Packages, 9965, 9968, 9972-9975 Packages

International Nuclear Information System (INIS)

Blanton, P.

2000-01-01

This Safety Analysis Report for Packaging (SARP) documents the analysis and testing performed on four type B Packages: the 9972, 9973, 9974, and 9975 packages. Because all four packages have similar designs with very similar performance characteristics, all of them are presented in a single SARP. The performance evaluation presented in this SARP documents the compliance of the 9975 package with the regulatory safety requirements. Evaluations of the 9972, 9973, and 9974 packages support that of the 9975. To avoid confusion arising from the inclusion of four packages in a single document, the text segregates the data for each package in such a way that the reader interested in only one package can progress from Chapter 1 through Chapter 9. The directory at the beginning of each chapter identifies each section that should be read for a given package. Sections marked ''all'' are generic to all packages

Ease of adoption of clinical natural language processing software: An evaluation of five systems.

Science.gov (United States)

Zheng, Kai; Vydiswaran, V G Vinod; Liu, Yang; Wang, Yue; Stubbs, Amber; Uzuner, Özlem; Gururaj, Anupama E; Bayer, Samuel; Aberdeen, John; Rumshisky, Anna; Pakhomov, Serguei; Liu, Hongfang; Xu, Hua

2015-12-01

considerable struggles. The results of the Track 3 evaluation show that the adoptability of the five participating clinical NLP systems has a great margin for improvement. Remedy strategies suggested by the evaluators included (1) more detailed and operation system specific use instructions; (2) provision of more pertinent onscreen feedback for easier diagnosis of problems; (3) including screen walk-throughs in use instructions so users know what to expect and what might have gone wrong; (4) avoiding jargon and acronyms in materials intended for end users; and (5) packaging prerequisites required within software distributions so that prospective adopters of the software do not have to obtain each of the third-party components on their own. Copyright © 2015 Elsevier Inc. All rights reserved.

Gammasphere software development

International Nuclear Information System (INIS)

Piercey, R.B.

1994-01-01

This report describes the activities of the nuclear physics group at Mississippi State University which were performed during 1993. Significant progress has been made in the focus areas: chairing the Gammasphere Software Working Group (SWG); assisting with the porting and enhancement of the ORNL UPAK histogramming software package; and developing standard formats for Gammasphere data products. In addition, they have established a new public ftp archive to distribute software and software development tools and information

Software package to automate the design and production of translucent building structures made of pvc

Directory of Open Access Journals (Sweden)

Petrova Irina Yur’evna

2016-08-01

Full Text Available The article describes the features of the design and production of translucent building structures made of PVC. The analysis of the automation systems of this process currently existing on the market is carried out, their advantages and disadvantages are identified. Basing on this analysis, a set of requirements for automation systems for the design and production of translucent building structures made of PVC is formulated; the basic entities are involved in those business processes. The necessary functions for the main application and for dealers’ application are specified. The main application is based on technological platform 1C: Enterprise 8.2. The dealers’ module is .NET application and is developed with the use of Microsoft Visual Studio and Microsoft SQL Server because these software products have client versions free for end users (.NET Framework 4.0 Client Profile and Microsoft SQL Server 2008 Express. The features of the developed software complex implementation are described; the relevant charts are given. The scheme of system deployment and protocols of data exchange between 1C server, 1C client and dealer is presented. Also the functions supported by 1C module and .NET module are described. The article describes the content of class library developed for .NET module. The specification of integration of the two applications in a single software package is given. The features of the GUI organization are described; the corresponding screenshots are given. The possible ways of further development of the described software complex are presented and a conclusion about its competitiveness and expediency of new researches is made.

PmagPy: Software Package for Paleomagnetic Data Analysis and Gateway to the Magnetics Information Consortium (MagIC) Database

Science.gov (United States)

Jonestrask, L.; Tauxe, L.; Shaar, R.; Jarboe, N.; Minnett, R.; Koppers, A. A. P.

2014-12-01

There are many data types and methods of analysis in rock and paleomagnetic investigations. The MagIC database (http://earthref.org/MAGIC) was designed to accommodate the vast majority of data used in such investigations. Yet getting data from the laboratory into the database, and visualizing and re-analyzing data downloaded from the database, makes special demands on data formatting. There are several recently published programming packages that deal with single types of data: demagnetization experiments (e.g., Lurcock et al., 2012), paleointensity experiments (e.g., Leonhardt et al., 2004), and FORC diagrams (e.g., Harrison et al., 2008). However, there is a need for a unified set of open source, cross-platform software that deals with the great variety of data types in a consistent way and facilitates importing data into the MagIC format, analyzing them and uploading them into the MagIC database. The PmagPy software package (http://earthref.org/PmagPy/cookbook/) comprises a such a comprehensive set of tools. It facilitates conversion of many laboratory formats into the common MagIC format and allows interpretation of demagnetization and Thellier-type experimental data. With some 175 programs and over 250 functions, it can be used to create a wide variety of plots and allows manipulation of downloaded data sets as well as preparation of new contributions for uploading to the MagIC database.

[Development of analysis software package for the two kinds of Japanese fluoro-d-glucose-positron emission tomography guideline].

Science.gov (United States)

Matsumoto, Keiichi; Endo, Keigo

2013-06-01

Two kinds of Japanese guidelines for the data acquisition protocol of oncology fluoro-D-glucose-positron emission tomography (FDG-PET)/computed tomography (CT) scans were created by the joint task force of the Japanese Society of Nuclear Medicine Technology (JSNMT) and the Japanese Society of Nuclear Medicine (JSNM), and published in Kakuigaku-Gijutsu 27(5): 425-456, 2007 and 29(2): 195-235, 2009. These guidelines aim to standardize PET image quality among facilities and different PET/CT scanner models. The objective of this study was to develop a personal computer-based performance measurement and image quality processor for the two kinds of Japanese guidelines for oncology (18)F-FDG PET/CT scans. We call this software package the "PET quality control tool" (PETquact). Microsoft Corporation's Windows(™) is used as the operating system for PETquact, which requires 1070×720 image resolution and includes 12 different applications. The accuracy was examined for numerous applications of PETquact. For example, in the sensitivity application, the system sensitivity measurement results were equivalent when comparing two PET sinograms obtained from the PETquact and the report. PETquact is suited for analysis of the two kinds of Japanese guideline, and it shows excellent spec to performance measurements and image quality analysis. PETquact can be used at any facility if the software package is installed on a laptop computer.

Evaluation of atlas-based auto-segmentation software in prostate cancer patients

International Nuclear Information System (INIS)

Greenham, Stuart; Dean, Jenna; Fu, Cheuk Kuen Kenneth; Goman, Joanne; Mulligan, Jeremy; Tune, Deanna; Sampson, David; Westhuyzen, Justin; McKay, Michael

2014-01-01

The performance and limitations of an atlas-based auto-segmentation software package (ABAS; Elekta Inc.) was evaluated using male pelvic anatomy as the area of interest. Contours from 10 prostate patients were selected to create atlases in ABAS. The contoured regions of interest were created manually to align with published guidelines and included the prostate, bladder, rectum, femoral heads and external patient contour. Twenty-four clinically treated prostate patients were auto-contoured using a randomised selection of two, four, six, eight or ten atlases. The concordance between the manually drawn and computer-generated contours were evaluated statistically using Pearson's product–moment correlation coefficient (r) and clinically in a validated qualitative evaluation. In the latter evaluation, six radiation therapists classified the degree of agreement for each structure using seven clinically appropriate categories. The ABAS software generated clinically acceptable contours for the bladder, rectum, femoral heads and external patient contour. For these structures, ABAS-generated volumes were highly correlated with ‘as treated’ volumes, manually drawn; for four atlases, for example, bladder r = 0.988 (P < 0.001), rectum r = 0.739 (P < 0.001) and left femoral head r = 0.560 (P < 0.001). Poorest results were seen for the prostate (r = 0.401, P < 0.05) (four atlases); however this was attributed to the comparison prostate volume being contoured on magnetic resonance imaging (MRI) rather than computed tomography (CT) data. For all structures, increasing the number of atlases did not consistently improve accuracy. ABAS-generated contours are clinically useful for a range of structures in the male pelvis. Clinically appropriate volumes were created, but editing of some contours was inevitably required. The ideal number of atlases to improve generated automatic contours is yet to be determined

Presenting an evaluation model of the trauma registry software.

Science.gov (United States)

Asadi, Farkhondeh; Paydar, Somayeh

2018-04-01

Trauma is a major cause of 10% death in the worldwide and is considered as a global concern. This problem has made healthcare policy makers and managers to adopt a basic strategy in this context. Trauma registry has an important and basic role in decreasing the mortality and the disabilities due to injuries resulted from trauma. Today, different software are designed for trauma registry. Evaluation of this software improves management, increases efficiency and effectiveness of these systems. Therefore, the aim of this study is to present an evaluation model for trauma registry software. The present study is an applied research. In this study, general and specific criteria of trauma registry software were identified by reviewing literature including books, articles, scientific documents, valid websites and related software in this domain. According to general and specific criteria and related software, a model for evaluating trauma registry software was proposed. Based on the proposed model, a checklist designed and its validity and reliability evaluated. Mentioned model by using of the Delphi technique presented to 12 experts and specialists. To analyze the results, an agreed coefficient of %75 was determined in order to apply changes. Finally, when the model was approved by the experts and professionals, the final version of the evaluation model for the trauma registry software was presented. For evaluating of criteria of trauma registry software, two groups were presented: 1- General criteria, 2- Specific criteria. General criteria of trauma registry software were classified into four main categories including: 1- usability, 2- security, 3- maintainability, and 4-interoperability. Specific criteria were divided into four main categories including: 1- data submission and entry, 2- reporting, 3- quality control, 4- decision and research support. The presented model in this research has introduced important general and specific criteria of trauma registry software

Selection of bioprocess simulation software for industrial applications.

Science.gov (United States)

Shanklin, T; Roper, K; Yegneswaran, P K; Marten, M R

2001-02-20

Two commercially available, process-simulation software packages (Aspen Batch Plus v1.2, Aspen Technology, Inc., Cambridge, Massachusetts, and Intelligen SuperPro v3.0, INTELLIGEN, INC., Scotch Plains, Ner Jersey) are evaluated for use in modeling industrial, biotechnology processes. Software is quantitatively evaluated by Kepner-Tregoe Decision Analysis (Kepner and Tregoe, 1981). This evaluation shows that Aspen Batch Plus v1.2 (ABP) and Intelligen SuperPro v3.0 (ISP) can successfully perform specific simulation tasks but do not provide a complete model of all phenomena occurring within a biotechnology process. Software is best suited to provide a format for process management, using material and energy balances to answer scheduling questions, explore equipment change-outs, and calculate cost data. The ability of simulation software to accurately predict unit operation scale-up and optimize bioprocesses is limited. To realistically evaluate the software, a vaccine manufacturing process under development at Merck & Company is simulated. Case studies from the vaccine process are presented as examples of how ABP and ISP can be used to shed light on real-world processing issues. Copyright 2001 John Wiley & Sons, Inc.

Integrated FASTBUS, VME and CAMAC diagnostic software at Fermilab

International Nuclear Information System (INIS)

Anderson, J.; Forster, R.; Franzen, J.; Wilcer, N.

1992-10-01

A fully integrated system for the diagnosis and repair of data acquisition hardware in FASTBUS, VME and CAMAC is described. A short cost/benefit analysis of using a distributed network of personal computers for diagnosis is presented. The SPUDS (Single Platform Uniting Diagnostic Software) software package developed at Fermilab by the authors is introduced. Examples of how SPUDS is currently used in the Fermilab equipment repair facility, as an evaluation tool and for field diagnostics are given

GPS Software Packages Deliver Positioning Solutions

Science.gov (United States)

2010-01-01

"To determine a spacecraft s position, the Jet Propulsion Laboratory (JPL) developed an innovative software program called the GPS (global positioning system)-Inferred Positioning System and Orbit Analysis Simulation Software, abbreviated as GIPSY-OASIS, and also developed Real-Time GIPSY (RTG) for certain time-critical applications. First featured in Spinoff 1999, JPL has released hundreds of licenses for GIPSY and RTG, including to Longmont, Colorado-based DigitalGlobe. Using the technology, DigitalGlobe produces satellite imagery with highly precise latitude and longitude coordinates and then supplies it for uses within defense and intelligence, civil agencies, mapping and analysis, environmental monitoring, oil and gas exploration, infrastructure management, Internet portals, and navigation technology."

US Army Radiological Bioassay and Dosimetry: The RBD software package

International Nuclear Information System (INIS)

Eckerman, K.F.; Ward, R.C.; Maddox, L.B.

1993-01-01

The RBD (Radiological Bioassay and Dosimetry) software package was developed for the U. S. Army Material Command, Arlington, Virginia, to demonstrate compliance with the radiation protection guidance 10 CFR Part 20 (ref. 1). Designed to be run interactively on an IBM-compatible personal computer, RBD consists of a data base module to manage bioassay data and a computational module that incorporates algorithms for estimating radionuclide intake from either acute or chronic exposures based on measurement of the worker's rate of excretion of the radionuclide or the retained activity in the body. In estimating the intake,RBD uses a separate file for each radionuclide containing parametric representations of the retention and excretion functions. These files also contain dose-per-unit-intake coefficients used to compute the committed dose equivalent. For a given nuclide, if measurements exist for more than one type of assay, an auxiliary module, REPORT, estimates the intake by applying weights assigned in the nuclide file for each assay. Bioassay data and computed results (estimates of intake and committed dose equivalent) are stored in separate data bases, and the bioassay measurements used to compute a given result can be identified. The REPORT module creates a file containing committed effective dose equivalent for each individual that can be combined with the individual's external exposure

Documentation package for the RFID temperature monitoring system (Model 9977 packages at NTS)

International Nuclear Information System (INIS)

Chen, K.; Tsai, H.

2009-01-01

The technical basis for extending the Model 9977 shipping package periodic maintenance beyond the one-year interval to a maximum of five years is based on the performance of the O-ring seals and the environmental conditions. The DOE Packaging Certification Program (PCP) has tasked Argonne National Laboratory to develop a Radio-Frequency Identification (RFID) temperature monitoring system for use by the facility personnel at DAF/NTS. The RFID temperature monitoring system, depicted in the figure below, consists of the Mk-1 RFId tags, a reader, and a control computer mounted on a mobile platform that can operate as a stand-alone system, or it can be connected to the local IT network. As part of the Conditions of Approval of the CoC, the user must complete the prescribed training to become qualified and be certified for operation of the RFID temperature monitoring system. The training course will be administered by Argonne National Laboratory on behalf of the Headquarters Certifying Official. This is a complete documentation package for the RFID temperature monitoring system of the Model 9977 packagings at NTS. The documentation package will be used for training and certification. The table of contents are: Acceptance Testing Procedure of MK-1 RFID Tags for DOE/EM Nuclear Materials Management Applications; Acceptance Testing Result of MK-1 RFID Tags for DOE/EM Nuclear Materials Management Applications; Performance Test of the Single Bolt Seal Sensor for the Model 9977 Packaging; Calibration of Built-in Thermistors in RFID Tags for Nevada Test Site; Results of Calibration of Built-in Thermistors in RFID Tags; Results of Thermal Calibration of Second Batch of MK-I RFID Tags; Procedure for Installing and Removing MK-1 RFID Tag on Model 9977 Drum; User Guide for RFID Reader and Software for Temperature Monitoring of Model 9977 Drums at NTS; Software Quality Assurance Plan (SQAP) for the ARG-US System; Quality Category for the RFID Temperature Monitoring System; The

Evaluation of radiation packages type A from the center of isotopes in Cuba

International Nuclear Information System (INIS)

Balbona, Zayda Amador; Pijuan, Saul Perez; Gual, Maritza Rodriguez

2013-01-01

The Isotope Center (CENTIS) of the Republic of Cuba makes the transportation of its products mainly in packaged type A. To undertake the design of packages, packaging components from 6 producing firms (including those found Amersham, CISBIO and IZOTOP) are studied. From the applicable regulations, security features and requirements are established as well as the technical characteristics of the packaging components. This study evaluated according each radioisotope, product and specific activity, high activity that can be included in a Type A package with the limitation that the dose rate on their surfaces is less than or equal to 2 mSv/h. In addition, each package is characterized taking into account the value of the maximum dose rate at maximum contact and the transport index for the day of transport. For this, the Microshield code using version 5.0.3. The dose rate in contact with the package of 90 Y is calculated using the Monte Carlo code MCNPX version 2.6.0. The maximum possible activity values are obtained for each shielding transport radionuclides CENTIS produced, namely 131 I, 125 I, 32 P, 99 Mo/ 99m Tc, 99m Tc, 188 Re and 90 Y and 69 radioactive packages type A are evaluated

A reliability evaluation method for NPP safety DCS application software

International Nuclear Information System (INIS)

Li Yunjian; Zhang Lei; Liu Yuan

2014-01-01

In the field of nuclear power plant (NPP) digital i and c application, reliability evaluation for safety DCS application software is a key obstacle to be removed. In order to quantitatively evaluate reliability of NPP safety DCS application software, this paper propose a reliability evaluating method based on software development life cycle every stage's v and v defects density characteristics, by which the operating reliability level of the software can be predicted before its delivery, and helps to improve the reliability of NPP safety important software. (authors)

Evaluation Framework and Analyses for Thermal Energy Storage Integrated with Packaged Air Conditioning

Energy Technology Data Exchange (ETDEWEB)

Kung, F.; Deru, M.; Bonnema, E.

2013-10-01

Few third-party guidance documents or tools are available for evaluating thermal energy storage (TES) integrated with packaged air conditioning (AC), as this type of TES is relatively new compared to TES integrated with chillers or hot water systems. To address this gap, researchers at the National Renewable Energy Laboratory conducted a project to improve the ability of potential technology adopters to evaluate TES technologies. Major project outcomes included: development of an evaluation framework to describe key metrics, methodologies, and issues to consider when assessing the performance of TES systems integrated with packaged AC; application of multiple concepts from the evaluation framework to analyze performance data from four demonstration sites; and production of a new simulation capability that enables modeling of TES integrated with packaged AC in EnergyPlus. This report includes the evaluation framework and analysis results from the project.

PAINeT: An object-oriented software package for simulations of flow-field, transport coefficients and flux terms in non-equilibrium gas mixture flows

Science.gov (United States)

Istomin, V. A.

2018-05-01

The software package Planet Atmosphere Investigator of Non-equilibrium Thermodynamics (PAINeT) has been devel-oped for studying the non-equilibrium effects associated with electronic excitation, chemical reactions and ionization. These studies are necessary for modeling process in shock tubes, in high enthalpy flows, in nozzles or jet engines, in combustion and explosion processes, in modern plasma-chemical and laser technologies. The advantages and possibilities of the package implementation are stated. Within the framework of the package implementation, based on kinetic theory approximations (one-temperature and state-to-state approaches), calculations are carried out, and the limits of applicability of a simplified description of shock-heated air flows and any other mixtures chosen by the user are given. Using kinetic theory algorithms, a numerical calculation of the heat fluxes and relaxation terms can be performed, which is necessary for further comparison of engineering simulation with experi-mental data. The influence of state-to-state distributions over electronic energy levels on the coefficients of thermal conductivity, diffusion, heat fluxes and diffusion velocities of the components of various gas mixtures behind shock waves is studied. Using the software package the accuracy of different approximations of the kinetic theory of gases is estimated. As an example state-resolved atomic ionized mixture of N/N+/O/O+/e- is considered. It is shown that state-resolved diffusion coefficients of neutral and ionized species vary from level to level. Comparing results of engineering applications with those given by PAINeT, recommendations for adequate models selection are proposed.

Free, cross-platform gRaphical software

DEFF Research Database (Denmark)

Dethlefsen, Claus

2006-01-01

-recursive graphical models, and models defined using the BUGS language. Today, there exists a wide range of packages to support the analysis of data using graphical models. Here, we focus on Open Source software, making it possible to extend the functionality by integrating these packages into more general tools. We...... will attempt to give an overview of the available Open Source software, with focus on the gR project. This project was launched in 2002 to make facilities in R for graphical modelling. Several R packages have been developed within the gR project both for display and analysis of graphical models...

Decon2LS: An open-source software package for automated processing and visualization of high resolution mass spectrometry data.

Science.gov (United States)

Jaitly, Navdeep; Mayampurath, Anoop; Littlefield, Kyle; Adkins, Joshua N; Anderson, Gordon A; Smith, Richard D

2009-03-17

Data generated from liquid chromatography coupled to high-resolution mass spectrometry (LC-MS)-based studies of a biological sample can contain large amounts of biologically significant information in the form of proteins, peptides, and metabolites. Interpreting this data involves inferring the masses and abundances of biomolecules injected into the instrument. Because of the inherent complexity of mass spectral patterns produced by these biomolecules, the analysis is significantly enhanced by using visualization capabilities to inspect and confirm results. In this paper we describe Decon2LS, an open-source software package for automated processing and visualization of high-resolution MS data. Drawing extensively on algorithms developed over the last ten years for ICR2LS, Decon2LS packages the algorithms as a rich set of modular, reusable processing classes for performing diverse functions such as reading raw data, routine peak finding, theoretical isotope distribution modelling, and deisotoping. Because the source code is openly available, these functionalities can now be used to build derivative applications in relatively fast manner. In addition, Decon2LS provides an extensive set of visualization tools, such as high performance chart controls. With a variety of options that include peak processing, deisotoping, isotope composition, etc, Decon2LS supports processing of multiple raw data formats. Deisotoping can be performed on an individual scan, an individual dataset, or on multiple datasets using batch processing. Other processing options include creating a two dimensional view of mass and liquid chromatography (LC) elution time features, generating spectrum files for tandem MS data, creating total intensity chromatograms, and visualizing theoretical peptide profiles. Application of Decon2LS to deisotope different datasets obtained across different instruments yielded a high number of features that can be used to identify and quantify peptides in the

AN ADA LINEAR ALGEBRA PACKAGE MODELED AFTER HAL/S

Science.gov (United States)

Klumpp, A. R.

1994-01-01

This package extends the Ada programming language to include linear algebra capabilities similar to those of the HAL/S programming language. The package is designed for avionics applications such as Space Station flight software. In addition to the HAL/S built-in functions, the package incorporates the quaternion functions used in the Shuttle and Galileo projects, and routines from LINPAK that solve systems of equations involving general square matrices. Language conventions in this package follow those of HAL/S to the maximum extent practical and minimize the effort required for writing new avionics software and translating existent software into Ada. Valid numeric types in this package include scalar, vector, matrix, and quaternion declarations. (Quaternions are fourcomponent vectors used in representing motion between two coordinate frames). Single precision and double precision floating point arithmetic is available in addition to the standard double precision integer manipulation. Infix operators are used instead of function calls to define dot products, cross products, quaternion products, and mixed scalar-vector, scalar-matrix, and vector-matrix products. The package contains two generic programs: one for floating point, and one for integer. The actual component type is passed as a formal parameter to the generic linear algebra package. The procedures for solving systems of linear equations defined by general matrices include GEFA, GECO, GESL, and GIDI. The HAL/S functions include ABVAL, UNIT, TRACE, DET, INVERSE, TRANSPOSE, GET, PUT, FETCH, PLACE, and IDENTITY. This package is written in Ada (Version 1.2) for batch execution and is machine independent. The linear algebra software depends on nothing outside the Ada language except for a call to a square root function for floating point scalars (such as SQRT in the DEC VAX MATHLIB library). This program was developed in 1989, and is a copyrighted work with all copyright vested in NASA.

The Use of Utility Accounting Software at Miami University.

Science.gov (United States)

Wenner, Paul

1999-01-01

Describes how Miami University successfully developed an accounting software package that tracked and recorded their utility usage, including examples of its graphics and reporting components. Background information examining the decision to pursue an energy management software package is included. (GR)

Research on software behavior trust based on hierarchy evaluation

Science.gov (United States)

Long, Ke; Xu, Haishui

2017-08-01

In view of the correlation software behavior, we evaluate software behavior credibility from two levels of control flow and data flow. In control flow level, method of the software behavior of trace based on support vector machine (SVM) is proposed. In data flow level, behavioral evidence evaluation based on fuzzy decision analysis method is put forward.

Evaluation of Magnetospheric Internal Magnetic Field models and Existing Software

Science.gov (United States)

1990-01-31

than an order of magnitude. The polar maxima are still visible, but they are not as distinct. The SAA is still apparent, but apin it is not as...completely overlap each other either. These plots show polar maxima (the right two panels) and the SAA minimum (the lower right panel). Note, that the...coGRF85 83M Contours Year - 1990.0 Atitude 1.5000 to 40 1221020.0 -225 4. DISCUSSION OF SOFWARE 4.1 INTRODUCION iliree basic software packages were used

Development of evaluation method for software hazard identification techniques

International Nuclear Information System (INIS)

Huang, H. W.; Chen, M. H.; Shih, C.; Yih, S.; Kuo, C. T.; Wang, L. H.; Yu, Y. C.; Chen, C. W.

2006-01-01

This research evaluated the applicable software hazard identification techniques nowadays, such as, Preliminary Hazard Analysis (PHA), Failure Modes and Effects Analysis (FMEA), Fault Tree Analysis (FTA), Markov chain modeling, Dynamic Flow-graph Methodology (DFM), and simulation-based model analysis; and then determined indexes in view of their characteristics, which include dynamic capability, completeness, achievability, detail, signal/noise ratio, complexity, and implementation cost. By this proposed method, the analysts can evaluate various software hazard identification combinations for specific purpose. According to the case study results, the traditional PHA + FMEA + FTA (with failure rate) + Markov chain modeling (with transfer rate) combination is not competitive due to the dilemma for obtaining acceptable software failure rates. However, the systematic architecture of FTA and Markov chain modeling is still valuable for realizing the software fault structure. The system centric techniques, such as DFM and simulation-based model-analysis, show the advantage on dynamic capability, achievability, detail, signal/noise ratio. However, their disadvantages are the completeness complexity and implementation cost. This evaluation method can be a platform to reach common consensus for the stakeholders. Following the evolution of software hazard identification techniques, the evaluation results could be changed. However, the insight of software hazard identification techniques is much more important than the numbers obtained by the evaluation. (authors)

Development of a Nevada Statewide Database for Safety Analyst Software

Science.gov (United States)

2017-02-02

Safety Analyst is a software package developed by the Federal Highway Administration (FHWA) and twenty-seven participating state and local agencies including the Nevada Department of Transportation (NDOT). The software package implemented many of the...

A European Commission software tool for radon risk calculation and evaluation of countermeasures

Energy Technology Data Exchange (ETDEWEB)

Degrange, J.P.; Levy, F.P. [CEPN, Fontenay-aux-Roses Cedex (France); Birchall, A.; Haylock, R.; Marsh, J.; Muirhead, C. [National Radiological Protection Board, Chilton (United Kingdom); Janssens, A. [European Commission, DG XI (Luxembourg)

2000-05-01

The effects of exposure to radon on workers and members of the public have been examined for many years. Recent advances have been made in evaluating the risk associated with radon exposure and in implementing remediation programmes in dwellings. However, decisions about whether to implement countermeasures to reduce radon exposures may benefit from an enhanced capability to evaluate and understand the associated health risk. In this context, the European Commission has launched a project to develop a user friendly software package based upon current information on radon epidemiology, radon dosimetry, demography, and countermeasure efficiency. The software has been designed to perform lung cancer risk calculations specific to European populations for various exposure profiles and to evaluate, in terms of risk reduction, the efficiency of various countermeasures in dwellings. This paper presents an overview of the general structure of the software and outlines its most important modelling approaches. The software is able to evaluate the risk of fatal lung cancer associated with individual or collective exposure to radon. The individual risk calculation module determines, for an individual of given age, sex and tobacco consumption, the excess risk for a given exposure (past or future exposure) time-profile, on the basis of demographic data (WHO, 1996 and 1998) specific to the selected population. The collective risk calculation module determines the excess risk for each occupant of a dwelling, for an exposure time-profile derived from data describing the dwelling, its occupancy, and the chosen countermeasures. These calculations may be done using one of two classical approaches: 1) The epidemiological approach in which the risk is obtained directly from the radon exposure data using a risk model (BEIR IV, 1988; BEIR VI, 1999) derived from epidemiological studies of uranium miners; 2) The dosimetric approach in which the risk is derived from the radon exposure data

A European Commission software tool for radon risk calculation and evaluation of countermeasures

International Nuclear Information System (INIS)

Degrange, J.P.; Levy, F.P.; Birchall, A.; Haylock, R.; Marsh, J.; Muirhead, C.; Janssens, A.

2000-01-01

The effects of exposure to radon on workers and members of the public have been examined for many years. Recent advances have been made in evaluating the risk associated with radon exposure and in implementing remediation programmes in dwellings. However, decisions about whether to implement countermeasures to reduce radon exposures may benefit from an enhanced capability to evaluate and understand the associated health risk. In this context, the European Commission has launched a project to develop a user friendly software package based upon current information on radon epidemiology, radon dosimetry, demography, and countermeasure efficiency. The software has been designed to perform lung cancer risk calculations specific to European populations for various exposure profiles and to evaluate, in terms of risk reduction, the efficiency of various countermeasures in dwellings. This paper presents an overview of the general structure of the software and outlines its most important modelling approaches. The software is able to evaluate the risk of fatal lung cancer associated with individual or collective exposure to radon. The individual risk calculation module determines, for an individual of given age, sex and tobacco consumption, the excess risk for a given exposure (past or future exposure) time-profile, on the basis of demographic data (WHO, 1996 and 1998) specific to the selected population. The collective risk calculation module determines the excess risk for each occupant of a dwelling, for an exposure time-profile derived from data describing the dwelling, its occupancy, and the chosen countermeasures. These calculations may be done using one of two classical approaches: 1) The epidemiological approach in which the risk is obtained directly from the radon exposure data using a risk model (BEIR IV, 1988; BEIR VI, 1999) derived from epidemiological studies of uranium miners; 2) The dosimetric approach in which the risk is derived from the radon exposure data

Eprints Institutional Repository Software: A Review

Directory of Open Access Journals (Sweden)

Mike R. Beazley

2011-01-01

Full Text Available Setting up an institutional repository (IR can be a daunting task. There are many software packages out there, some commercial, some open source, all of which offer different features and functionality. This article will provide some thoughts about one of these software packages: Eprints. Eprints was one of the first IR software packages to appear and has been available for 10 years. It is under continual development by its creators at the University of Southampton and the current version is v3.2.3. Eprints is open-source, meaning that anyone can download and make use of the software for free and the software can be modified however the user likes. This presents clear advantages for institutions will smaller budgets and also for institutions that have programmers on staff. Eprints requires some additional software to run: Linux, Apache, MySQL, and Perl. This software is all open-source and already present on the servers of many institutions. There is now a version of Eprints that will run on Windows servers as well, which will make the adoption of Eprints even easier for some. In brief, Eprints is an excellent choice for any institution looking to get an IR up and running quickly and easily. Installation is straightforward as is the initial configuration. Once the IR is up and running, users may upload documents and provide the necessary metadata for the records by filling out a simple web form. Embargoes on published documents are handled elegantly by the software, and the software links to the SHERPA/RoMEO database so authors can easily verify their rights regarding IR submissions. Eprints has some drawbacks, which will be discussed later in the review, but on the whole it is easy to recommend to anyone looking to start an IR. However, It is less clear that an institution with an existing IR based on another software package should migrate to Eprints.

Uncertainty evaluation methods for waste package performance assessment

International Nuclear Information System (INIS)

Wu, Y.T.; Nair, P.K.; Journel, A.G.; Abramson, L.R.

1991-01-01

This report identifies and investigates methodologies to deal with uncertainties in assessing high-level nuclear waste package performance. Four uncertainty evaluation methods (probability-distribution approach, bounding approach, expert judgment, and sensitivity analysis) are suggested as the elements of a methodology that, without either diminishing or enhancing the input uncertainties, can evaluate performance uncertainty. Such a methodology can also help identify critical inputs as a guide to reducing uncertainty so as to provide reasonable assurance that the risk objectives are met. This report examines the current qualitative waste containment regulation and shows how, in conjunction with the identified uncertainty evaluation methodology, a framework for a quantitative probability-based rule can be developed that takes account of the uncertainties. Current US Nuclear Regulatory Commission (NRC) regulation requires that the waste packages provide ''substantially complete containment'' (SCC) during the containment period. The term ''SCC'' is ambiguous and subject to interpretation. This report, together with an accompanying report that describes the technical considerations that must be addressed to satisfy high-level waste containment requirements, provides a basis for a third report to develop recommendations for regulatory uncertainty reduction in the ''containment''requirement of 10 CFR Part 60. 25 refs., 3 figs., 2 tabs

Usability Evaluation Method for Agile Software Development

Directory of Open Access Journals (Sweden)

Saad Masood Butt

2015-02-01

Full Text Available Agile methods are the best fit for tremendously growing software industry due to its flexible and dynamic nature. But the software developed using agile methods do meet the usability standards? To answer this question we can see that majority of agile software development projects currently involve interactive user interface designs, which can only be possible by following User Centered Design (UCD in agile methods. The question here is, how to integrate UCD with agile models. Both Agile models and UCD are iterative in nature but agile models focus on coding and development of software; whereas, UCD focuses on user interface of the software. Similarly, both of them have testing features where the agile model involves automated tested code while UCD involves an expert or a user to test the user interface. In this paper, a new agile usability model is proposed and the evaluation is of the proposed model is presented by practically implementing it in three real life projects. . Key results from these projects clearly show: the proposed agile model incorporates usability evaluation methods, improves the relationship between usability experts to work with agile software experts; in addition, allows agile developers to incorporate the result from UCD into subsequent interactions.

Evaluation for nuclear safety-critical software reliability of DCS

International Nuclear Information System (INIS)

Liu Ying

2015-01-01

With the development of control and information technology at NPPs, software reliability is important because software failure is usually considered as one form of common cause failures in Digital I and C Systems (DCS). The reliability analysis of DCS, particularly qualitative and quantitative evaluation on the nuclear safety-critical software reliability belongs to a great challenge. To solve this problem, not only comprehensive evaluation model and stage evaluation models are built in this paper, but also prediction and sensibility analysis are given to the models. It can make besement for evaluating the reliability and safety of DCS. (author)

DOE evaluation document for DOT 7A Type A packaging

International Nuclear Information System (INIS)

Edling, D.A.; Hopkins, D.R.; Williams, R.L.

1987-03-01

This document is a support document for the ''DOE Evaluation Document for DOT 7A Type A Packaging,'' MLM-3245, March 1987. Provided herein are details concerning the performance requirements specified in 178.350 Specification 7A, General Packaging, Type A. MLM-3245 references appropriate sections in this document. This document does not by itself meet the documentation requirements specified in 49 CFR 173.415 and has compliance value only when used in conjunction with MLM-3245

Software Reviews.

Science.gov (United States)

Dwyer, Donna; And Others

1989-01-01

Reviewed are seven software packages for Apple and IBM computers. Included are: "Toxicology"; "Science Corner: Space Probe"; "Alcohol and Pregnancy"; "Science Tool Kit Plus"; Computer Investigations: Plant Growth"; "Climatrolls"; and "Animal Watch: Whales." (CW)

Training Software Developers and Designers to Conduct Usability Evaluations

Science.gov (United States)

Skov, Mikael Brasholt; Stage, Jan

2012-01-01

Many efforts to improve the interplay between usability evaluation and software development rely either on better methods for conducting usability evaluations or on better formats for presenting evaluation results in ways that are useful for software designers and developers. Both of these approaches depend on a complete division of work between…

ENDVER-ENDVER/GUI, The ENDF File Verification Support Package

International Nuclear Information System (INIS)

Trkov, Andrej; Zerkin, V.; Cullen, Dermott E.

2005-01-01

1 - Description of program or function: Experimental and evaluated nuclear reaction data are compiled world-wide in EXFOR and in ENDF format, respectively. The ENDVER package can be used to convert EXFOR data into computational C4 format, display them and compare graphically with the contents of a specified evaluated data file. The package also contains utilities to retrieve selected materials from a master library in ENDF format, extract cross sections (including differential and double differential data) and output them in two-column PLOTTAB 'curves' format. IAEA1402/03: The ENVER/GUI version contains in addition to ENDVER, also the EXFOR and CINDA Databases (version 1.70 of January 2005) and software providing data search and presentation, the PREPRO ENDF pre-processing codes by D.E. Cullen (PREPRO-2002) and the ZVVIEW interactive graphic data display package. A new GUI (Graphics User Interface) is presented. EndVer and EXFOR/CINDA are directly accessible by the user through the GUI. 2 - Restrictions on the complexity of the problem: None

Methodology for Evaluating the Insect Growth Regulator (IGR Methoprene on Packaging Films

Directory of Open Access Journals (Sweden)

Frank H. Arthur

2016-07-01

Full Text Available The insect growth regulator methoprene can be mixed into the matrix used to comprise bags and other packaging materials. Different methodologies were utilized to evaluate the efficacy of different types of methoprene-treated packaging towards Tribolium castaneum (Herbst, the red flour beetle, and T. confusum Jacquelin duVal, the confused flour beetle, two common insect species that infest stored products. Tests were conducted by creating arenas in which larvae were exposed on the packaging surface along with a flour food source, and assessments were made on adults emerging from the exposed progeny. Tests were also done by exposing adults, again with a flour food source, removing the adults after one week, and assessing adult emergence of progeny from those parental adults. In tests with larvae exposed on methoprene-treated birdseed bags, the outside surface had more activity compared to the inside surface, especially on T. confusum. In other studies with different types of packaging materials, there was generally 100% inhibition of adult emergence of exposed larvae or of progeny adults when parental adults were exposed on the methoprene-treated packaging. The best technique for evaluation was to expose late-stage larvae as the test life stage. Results show the potential of using methoprene-treated packaging for bagged storage of processed grains and grain products.

Testing and evaluation of used UF6 shipping packages

International Nuclear Information System (INIS)

Barlow, C.R.; Ziehlke, K.T.; Pryor, W.A.; Housholder, W.R.

1986-01-01

Damage to shipping packages and their components, whether due to normal environmental exposure or because of unforeseen accidents, requires occasional reevaluation and requalification to assure the suitability of the packages for continued service. Pressure tests have been conducted on used 30B cylinders that were involved in a warehouse fire to assess the possible damaging effects of the exposure. Deteriorated and mechanically damaged overpacks which had absorbed large quantities of water in service were subjected to drying tests, foam properties were evaluated, and a rehabilitation procedure was developed to allow return of such packages to service. Protective shipping packages show deterioration with extended service, principally structural damage from rough handling and rust damage from exposure to weather and from storage practices which may promote absorption of water by the insulating foam. The structural and thermal properties of the phenolic foam insulation from used shipping packages were found to be not adversely affected by absorbed water, and they were not degraded by the drying process. In order to slow or avoid continuing rust damage in renovated packages, however, a process was developed for drying the foam in commercial facilities prior to restoration work on used or damaged containers. Two 2-1/2-ton steel transport cylinders, type 30B, were involved in a warehouse fire where portions of the cylinders were estimated to have reached a temperature of 1600 0 F. The cylinders were empty at the time of the fire and thus were not in the protective packages in which full product cylinders are handled while in transit. Hydrostatic burst tests showed that the integrity of the cylinders was not degraded by the fire exposure. They withstood test pressures in excess of 10 times the design pressure, and showed a volume expansion of 30% above the original capacity before rupturing in a completely ductile fashion

STEM - software test and evaluation methods. A study of failure dependency in diverse software

International Nuclear Information System (INIS)

Bishop, P.G.; Pullen, F.D.

1989-02-01

STEM is a collaborative software reliability project undertaken in partnership with Halden Reactor Project, UKAEA, and the Finnish Technical Research Centre. The objective of STEM is to evaluate a number of fault detection and fault estimation methods which can be applied to high integrity software. This Report presents a study of the observed failure dependencies between faults in diversely produced software. (author)

Consumers' evaluations of ecological packaging - rational and emotional approaches

OpenAIRE

Koenig-Lewis, Nicole; Palmer, Adrian; Dermody, Janine; Urbye, Andreas

2014-01-01

Ecological marketing claims have been criticized for confusing or misleading buyers, leading to calls for more rationality in promoting and evaluating ‘green’ products. However, emotions are important drivers influencing pro-environmental purchase decisions. This study investigates consumers' emotional and rational evaluations of pro-environmental packaging. A conceptual model incorporates individuals' general environmental concerns, their rational beliefs about environmental effects of produ...

Deriving stellar parameters with the SME software package

Science.gov (United States)

Piskunov, N.

2017-09-01

Photometry and spectroscopy are complementary tools for deriving accurate stellar parameters. Here I present one of the popular packages for stellar spectroscopy called SME with the emphasis on the latest developments and error assessment for the derived parameters.

Development of a fatigue analysis software system

International Nuclear Information System (INIS)

Choi, B. I.; Lee, H. J.; Han, S. W.; Kim, J. Y.; Hwang, K. H.; Kang, J. Y.

2001-01-01

A general purpose fatigue analysis software to predict fatigue lives of mechanical components and structures was developed. This software has some characteristic features including functions of searching weak regions on the free surface in order to reduce computing time significantly, a database of fatigue properties for various materials, and an expert system which can assist any users to get more proper results. This software can be used in the environment consists of commercial finite element packages. Using the software developed fatigue analyses for a SAE keyhole specimen and an automobile knuckle were carried out. It was observed that the results were agree well with those from commercial packages

GERMINATOR: a software package for high-throughput scoring and curve fitting of Arabidopsis seed germination.

Science.gov (United States)

Joosen, Ronny V L; Kodde, Jan; Willems, Leo A J; Ligterink, Wilco; van der Plas, Linus H W; Hilhorst, Henk W M

2010-04-01

Over the past few decades seed physiology research has contributed to many important scientific discoveries and has provided valuable tools for the production of high quality seeds. An important instrument for this type of research is the accurate quantification of germination; however gathering cumulative germination data is a very laborious task that is often prohibitive to the execution of large experiments. In this paper we present the germinator package: a simple, highly cost-efficient and flexible procedure for high-throughput automatic scoring and evaluation of germination that can be implemented without the use of complex robotics. The germinator package contains three modules: (i) design of experimental setup with various options to replicate and randomize samples; (ii) automatic scoring of germination based on the color contrast between the protruding radicle and seed coat on a single image; and (iii) curve fitting of cumulative germination data and the extraction, recap and visualization of the various germination parameters. The curve-fitting module enables analysis of general cumulative germination data and can be used for all plant species. We show that the automatic scoring system works for Arabidopsis thaliana and Brassica spp. seeds, but is likely to be applicable to other species, as well. In this paper we show the accuracy, reproducibility and flexibility of the germinator package. We have successfully applied it to evaluate natural variation for salt tolerance in a large population of recombinant inbred lines and were able to identify several quantitative trait loci for salt tolerance. Germinator is a low-cost package that allows the monitoring of several thousands of germination tests, several times a day by a single person.

Technical Evaluation Report 37: Assistive Software for Disabled Learners

Directory of Open Access Journals (Sweden)

Jon Baggaley

2004-11-01

Full Text Available Previous reports in this series (#32 and 36 have discussed online software features of value to disabled learners in distance education. The current report evaluates four specific assistive software products with useful features for visually and hearing impaired learners: ATutor, ACollab, Natural Voice, and Just Vanilla. The evaluative criteria discussed include the purpose, uses, costs, and features of each software product, all considered primarily from the accessibility perspective.

EQ3/6 software test and verification report 9/94

International Nuclear Information System (INIS)

Kishi, T.

1996-02-01

This document is the Software Test and Verification Report (STVR) for the EQ3/6 suite of codes as stipulated in the Individual Software Plan for Initial Qualification of EQ3/6 (ISP-NF-07, Revision 1, 11/25/92). The software codes, EQPT, EQ3NR, EQ6, and the software library EQLIB constitute the EQ3/6 software package. This software test and verification project for EQ3/6 was started under the requirements of the LLNL Yucca Mountain Project Software Quality Assurance Plan (SQAP), Revision 0, December 14, 1989, but QP 3.2, Revision 2, June 21, 1994 is now the operative controlling procedure. This is a ''V and V'' report in the language of QP 3.2, Revision 2. Because the author of this report does not have a background in geochemistry, other technical sources were consulted in order to acquire some familiarity with geochemisty, the terminology minology involved, and to review comparable computational methods especially, geochemical aqueous speciation-solubility calculations. The software for the EQ3/6 package consists of approximately 47,000 lines of FORTRAN77 source code and nine on platforms ranging from workstations to supercomputers. The physical control of EQ3/6 software package and documentation is on a SUN SPARC station. Walkthroughs of each principal software packages, EQPT, EQ3NR, and EQ6 were conducted in order to understand the computational procedures involved, to determine any commonality in procedures, and then to establish a plan for the test and verification of EQ3/6. It became evident that all three phases depended upon solving an n x n matrix by the Newton-Raphson Method. Thus, a great deal of emphasis on the test and verification of this procedure was carried out on the first code in the software package EQPT

EQ3/6 software test and verification report 9/94

Energy Technology Data Exchange (ETDEWEB)

Kishi, T.

1996-02-01

This document is the Software Test and Verification Report (STVR) for the EQ3/6 suite of codes as stipulated in the Individual Software Plan for Initial Qualification of EQ3/6 (ISP-NF-07, Revision 1, 11/25/92). The software codes, EQPT, EQ3NR, EQ6, and the software library EQLIB constitute the EQ3/6 software package. This software test and verification project for EQ3/6 was started under the requirements of the LLNL Yucca Mountain Project Software Quality Assurance Plan (SQAP), Revision 0, December 14, 1989, but QP 3.2, Revision 2, June 21, 1994 is now the operative controlling procedure. This is a ``V and V`` report in the language of QP 3.2, Revision 2. Because the author of this report does not have a background in geochemistry, other technical sources were consulted in order to acquire some familiarity with geochemisty, the terminology minology involved, and to review comparable computational methods especially, geochemical aqueous speciation-solubility calculations. The software for the EQ3/6 package consists of approximately 47,000 lines of FORTRAN77 source code and nine on platforms ranging from workstations to supercomputers. The physical control of EQ3/6 software package and documentation is on a SUN SPARC station. Walkthroughs of each principal software packages, EQPT, EQ3NR, and EQ6 were conducted in order to understand the computational procedures involved, to determine any commonality in procedures, and then to establish a plan for the test and verification of EQ3/6. It became evident that all three phases depended upon solving an n x n matrix by the Newton-Raphson Method. Thus, a great deal of emphasis on the test and verification of this procedure was carried out on the first code in the software package EQPT.

The IPNS rietveld analysis software package for TOF [time-of-flight] powder diffraction data: Recent developments

International Nuclear Information System (INIS)

Rotella, F.J.; Richardson, J.W. Jr.

1987-01-01

A system of FORTRAN programs for the analysis of time-of-flight (TOF) neutron powder diffraction data via the Rietveld method at IPNS has been modified recently, making it possible to analyze data that exhibit diffraction maxima broadened due to anisotropic strain and that can be modeled by individual atomic anharmonic thermal vibrations. The observation of noncrystalline scattering in data from some powder samples has led to the development of software to fit such scattering by a function related to a radial distribution function through Fourier-filtering techniques. The ''user friendliness'' of the IPNS Rietveld package has been enhanced by the development of ''RIETVELD,'' a menu-based VAX/VMS command language routine for interactive file manipulation and program execution

Linear algebra applications using Matlab software

Directory of Open Access Journals (Sweden)

Cornelia Victoria Anghel

2005-10-01

Full Text Available The paper presents two ways of special matrix generating using some functions included in the MatLab software package. The MatLab software package contains a set of functions that generate special matrixes used in the linear algebra applications and the signal processing from different activity fields. The paper presents two tipes of special matrixes that can be generated using written sintaxes in the dialog window of the MatLab software and for the command validity we need to press the Enter task. The applications presented in the paper represent eamples of numerical calculus using the MatLab software and belong to the scientific field „Computer Assisted Mathematics” thus creating the symbiosis between mathematics and informatics.

Software Library for Bruker TopSpin NMR Data Files

Energy Technology Data Exchange (ETDEWEB)

2016-10-14

A software library for parsing and manipulating frequency-domain data files that have been processed using the Bruker TopSpin NMR software package. In the context of NMR, the term "processed" indicates that the end-user of the Bruker TopSpin NMR software package has (a) Fourier transformed the raw, time-domain data (the Free Induction Decay) into the frequency-domain and (b) has extracted the list of NMR peaks.

Development and evaluation of measurement devices used to support testing of radioactive material transportation packages

International Nuclear Information System (INIS)

Uncapher, W.L.; Ammerman, D.J.; Stenberg, D.R.; Bronowski, D.R.; Arviso, M.

1992-01-01

Radioactive material package designers use structural testing to verify and demonstrate package performance. A major part of evaluating structural response is the collection of instrumentation measurement data. Sandia National Laboratories (SNL) has an ongoing program to develop and evaluate measurement devices to support testing of radioactive material packages. Measurement devices developed in support of this activity include evaluation channels, ruggedly constructed linear variable differential transformers, and piezoresistive accelerometers with enhanced measurement capabilities. In addition to developing measurement devices, a method has been derived to evaluate accelerometers and strain gages for measurement repeatability, ruggedness, and manufacturers' calibration data under both laboratory and field conditions. The developed measurement devices and evaluation technique will be discussed and the results of the evaluation will be presented

Performance evaluation of cassava starch-zinc nanocomposite film for tomatoes packaging

Directory of Open Access Journals (Sweden)

Adeshina Fadeyibi

2017-05-01

Full Text Available Biodegradable nanocomposite films are novel materials for food packaging because of their potential to extend the shelf life of food. In this research, the performance of cassava starch-zincnanocomposite film was evaluated for tomatoes packaging. The films were developed by casting the solutions of 24 g cassava starch, 0-2% (w/w zinc nanoparticles and 55% (w/w glycerol in plastic mould of 12 mm depth. The permeability of the films, due to water and oxygen, was investigated at 27°C and 65% relative humidity while the mechanical properties were determined by nanoindentation technique. The average thickness of the dried nanocomposite films was found to be 17±0.13 μm. The performances of films for tomatoes packaging was evaluated in comparison with low density polyethylene (LDPE; 10 μm at the temperature and period ranges of 10-27°C and 0-9 days, respectively. The quality and microbial attributes of the packaged tomatoes, including ascorbic acid, β-carotene and total coliform were analysed at an interval of 3 days. The results revealed that the water vapour permeability increased while the oxygen permeability decreased with the nanoparticles (P<0.05. The hardness, creep, elastic and plastic works, which determined the plasticity index of the film, decreased generally with the nanoparticles. The films containing 1 and 2% of the nanoparticles suppressed the growth of microorganisms and retained the quality of tomatoes than the LDPE at 27°C and day-9 of packaging (P<0.05. The results implied that the film could effectively be used for tomatoes packaging due to their lower oxygen permeability, hardness, elastic and plastic works.

Evaluation of low and intermediate level radioactive solidified waste forms and packages

International Nuclear Information System (INIS)

1990-10-01

Evaluation of low and intermediate level radioactive waste forms and packages with respect to compliance with quality and safety requirements for transport, interim storage and disposal has become a very important part of the radioactive waste management strategy in many countries. The evaluation of waste forms and packages provides precise basic data for regulatory bodies to establish safety requirements, and implement quality control and quality assurance procedures for radioactive waste management programmes. The requirements depend very much upon the disposal option selected, treatment technology used, waste form characteristics, package quality and other factors. The regulatory requirements can also influence the methodology of waste form/package evaluation together with selection and analysis of data for quality control and safety assurance. A coordinated research programme started at the end of 1985 and brought together 12 participants from 11 countries. The results of the programme and each particular project were discussed at three Research Coordination Meetings held in Cairo, Egypt, in May, 1986; in Beijing, China, in April, 1998; and at Harwell Laboratory, United Kingdom, in November, 1989. This document summarises the salient features and results achieved during the four year investigation and a recommendation for future work in this area. Refs, figs and tabs

Savannah River Plant Californium-252 Shuffler software manual

International Nuclear Information System (INIS)

Johnson, S.S.; Crane, T.W.; Eccleston, G.W.

1979-03-01

A software manual for operating the Savannah River Plant Shuffler nondestructive assay instrument is presented. The procedures for starting up the instrument, making assays, calibrating, and checking the performance of the hardware units are described. A list of the error messages with an explanation of the circumstances prompting the message and possible corrective measures is given. A summary of the software package is included showing the names and contents of the files and subroutines. The procedure for modifying the software package is outlined

The irace package: Iterated racing for automatic algorithm configuration

Directory of Open Access Journals (Sweden)

Manuel López-Ibáñez

2016-01-01

Full Text Available Modern optimization algorithms typically require the setting of a large number of parameters to optimize their performance. The immediate goal of automatic algorithm configuration is to find, automatically, the best parameter settings of an optimizer. Ultimately, automatic algorithm configuration has the potential to lead to new design paradigms for optimization software. The irace package is a software package that implements a number of automatic configuration procedures. In particular, it offers iterated racing procedures, which have been used successfully to automatically configure various state-of-the-art algorithms. The iterated racing procedures implemented in irace include the iterated F-race algorithm and several extensions and improvements over it. In this paper, we describe the rationale underlying the iterated racing procedures and introduce a number of recent extensions. Among these, we introduce a restart mechanism to avoid premature convergence, the use of truncated sampling distributions to handle correctly parameter bounds, and an elitist racing procedure for ensuring that the best configurations returned are also those evaluated in the highest number of training instances. We experimentally evaluate the most recent version of irace and demonstrate with a number of example applications the use and potential of irace, in particular, and automatic algorithm configuration, in general.

Software Comparison for Renewable Energy Deployment in a Distribution Network

Energy Technology Data Exchange (ETDEWEB)

Gao, David Wenzhong [Alternative Power Innovations, LLC, Sharonville, OH (United States); Muljadi, Eduard [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tian, Tian [National Renewable Energy Lab. (NREL), Golden, CO (United States); Miller, Mackay [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-02-22

The main objective of this report is to evaluate different software options for performing robust distributed generation (DG) power system modeling. The features and capabilities of four simulation tools, OpenDSS, GridLAB-D, CYMDIST, and PowerWorld Simulator, are compared to analyze their effectiveness in analyzing distribution networks with DG. OpenDSS and GridLAB-D, two open source software, have the capability to simulate networks with fluctuating data values. These packages allow the running of a simulation each time instant by iterating only the main script file. CYMDIST, a commercial software, allows for time-series simulation to study variations on network controls. PowerWorld Simulator, another commercial tool, has a batch mode simulation function through the 'Time Step Simulation' tool, which obtains solutions for a list of specified time points. PowerWorld Simulator is intended for analysis of transmission-level systems, while the other three are designed for distribution systems. CYMDIST and PowerWorld Simulator feature easy-to-use graphical user interfaces (GUIs). OpenDSS and GridLAB-D, on the other hand, are based on command-line programs, which increase the time necessary to become familiar with the software packages.

IMAGE information monitoring and applied graphics software environment. Volume 4. Applications description

International Nuclear Information System (INIS)

Hallam, J.W.; Ng, K.B.; Upham, G.L.

1986-09-01

The EPRI Information Monitoring and Applied Graphics Environment (IMAGE) system is designed for 'fast proto-typing' of advanced concepts for computer-aided plant operations tools. It is a flexible software system which can be used for rapidly creating, dynamically driving and evaluating advanced operator aid displays. The software is written to be both host computer and graphic device independent. This four volume report includes an Executive Overview of the IMAGE package (Volume 1), followed by Software Description (Volume II), User's Guide (Volume III), and Description of Example Applications (Volume IV)

Decon2LS: An open-source software package for automated processing and visualization of high resolution mass spectrometry data

Directory of Open Access Journals (Sweden)

Anderson Gordon A

2009-03-01

Full Text Available Abstract Background Data generated from liquid chromatography coupled to high-resolution mass spectrometry (LC-MS-based studies of a biological sample can contain large amounts of biologically significant information in the form of proteins, peptides, and metabolites. Interpreting this data involves inferring the masses and abundances of biomolecules injected into the instrument. Because of the inherent complexity of mass spectral patterns produced by these biomolecules, the analysis is significantly enhanced by using visualization capabilities to inspect and confirm results. In this paper we describe Decon2LS, an open-source software package for automated processing and visualization of high-resolution MS data. Drawing extensively on algorithms developed over the last ten years for ICR2LS, Decon2LS packages the algorithms as a rich set of modular, reusable processing classes for performing diverse functions such as reading raw data, routine peak finding, theoretical isotope distribution modelling, and deisotoping. Because the source code is openly available, these functionalities can now be used to build derivative applications in relatively fast manner. In addition, Decon2LS provides an extensive set of visualization tools, such as high performance chart controls. Results With a variety of options that include peak processing, deisotoping, isotope composition, etc, Decon2LS supports processing of multiple raw data formats. Deisotoping can be performed on an individual scan, an individual dataset, or on multiple datasets using batch processing. Other processing options include creating a two dimensional view of mass and liquid chromatography (LC elution time features, generating spectrum files for tandem MS data, creating total intensity chromatograms, and visualizing theoretical peptide profiles. Application of Decon2LS to deisotope different datasets obtained across different instruments yielded a high number of features that can be used to

Object-oriented design of medical imaging software.

Science.gov (United States)

Ligier, Y; Ratib, O; Logean, M; Girard, C; Perrier, R; Scherrer, J R

1994-01-01

A special software package for interactive display and manipulation of medical images was developed at the University Hospital of Geneva, as part of a hospital wide Picture Archiving and Communication System (PACS). This software package, called Osiris, was especially designed to be easily usable and adaptable to the needs of noncomputer-oriented physicians. The Osiris software has been developed to allow the visualization of medical images obtained from any imaging modality. It provides generic manipulation tools, processing tools, and analysis tools more specific to clinical applications. This software, based on an object-oriented paradigm, is portable and extensible. Osiris is available on two different operating systems: the Unix X-11/OSF-Motif based workstations, and the Macintosh family.

Counting radon tracks in Makrofol detectors with the 'image reduction and analysis facility' (IRAF) software package

Energy Technology Data Exchange (ETDEWEB)

Hernandez, F. [Laboratorio de Fisica Medica y Radioactividad Ambiental, Departamento de Medicina Fisica y Farmacologia, Universidad de La Laguna, 38320 La Laguna, Tenerife (Spain)]. E-mail: fimerall@ull.es; Gonzalez-Manrique, S. [Laboratorio de Fisica Medica y Radioactividad Ambiental, Departamento de Medicina Fisica y Farmacologia, Universidad de La Laguna, 38320 La Laguna, Tenerife (Spain); Karlsson, L. [Laboratorio de Fisica Medica y Radioactividad Ambiental, Departamento de Medicina Fisica y Farmacologia, Universidad de La Laguna, 38320 La Laguna, Tenerife (Spain); Hernandez-Armas, J. [Laboratorio de Fisica Medica y Radioactividad Ambiental, Departamento de Medicina Fisica y Farmacologia, Universidad de La Laguna, 38320 La Laguna, Tenerife (Spain); Aparicio, A. [Instituto de Astrofisica de Canarias, 38200 La Laguna, Tenerife (Spain); Departamento de Astrofisica, Universidad de La Laguna. Avenida. Astrofisico Francisco Sanchez s/n, 38071 La Laguna, Tenerife (Spain)

2007-03-15

Makrofol detectors are commonly used for long-term radon ({sup 222}Rn) measurements in houses, schools and workplaces. The use of this type of passive detectors for the determination of radon concentrations requires the counting of the nuclear tracks produced by alpha particles on the detecting material. The 'image reduction and analysis facility' (IRAF) software package is a piece of software commonly used in astronomical applications. It allows detailed counting and mapping of sky sections where stars are grouped very closely, even forming clusters. In order to count the nuclear tracks in our Makrofol radon detectors, we have developed an inter-disciplinary application that takes advantage of the similitude that exist between counting stars in a dark sky and tracks in a track-etch detector. Thus, a low cost semi-automatic system has been set up in our laboratory which utilises a commercially available desktop scanner and the IRAF software package. A detailed description of the proposed semi-automatic method and its performance, in comparison to ocular counting, is described in detail here. In addition, the calibration factor for this procedure, 2.97+/-0.07kBqm{sup -3}htrack{sup -1}cm{sup 2}, has been calculated based on the results obtained from exposing 46 detectors to certified radon concentrations. Furthermore, the results of a preliminary radon survey carried out in 62 schools in Tenerife island (Spain), using Makrofol detectors, counted with the mentioned procedure, are briefly presented. The results reported here indicate that the developed procedure permits a fast, accurate and unbiased determination of the radon tracks in a large number of detectors. The measurements carried out in the schools showed that the radon concentrations in at least 12 schools were above 200Bqm{sup -3} and, in two of them, above 400Bqm{sup -3}. Further studies should be performed at those schools following the European Union recommendations about radon concentrations in

VISUAL: a software package for plotting data in the RADHEAT-V4 code system

International Nuclear Information System (INIS)

Sasaki, Toshihiko; Yamano, Naoki

1984-03-01

In this report, the features, the capabilities and the constitution of the VISUAL Software Package are presented. The one of the features is that the VISUAL provides a versatile graphic display tool to plot a wide variety of data of the RADHEAT-V4 code system. And the other is to enable a user to handle easily the executing data in the Conversational Management Mode named ''CMM''. The program adopts the adjustable dimension system to increase its flexibility. VISUAL generates two-dimensional drawing, contour line map and three dimensional drawing on TSS (Time Sharing System) digital graphic equipment, NLP (Nihongo Laser Printer) or COM(Computer Output Microfilm). It is easily possible to display the calculated and experimental data in a DATA-POOL by using these functions. The purpose of this report is to describe sufficient information to enable a user to use VISUAL profitabily. (author)

Safety evaluation for packaging for 1720-DR sodium-filled tank

International Nuclear Information System (INIS)

Mercado, M.S.

1996-01-01

Preparations are under way to sell the sodium stored in the 1720-DR tank in the 1720-DR building. This will require that the tank, as well as the 1720-DR facility, be moved to the 300 Area, so that the sodium may be melted and transferred into a railroad tanker car. Because the sodium is a hazardous material and is being shipped in a nonspecification packaging, a safety evaluation for packaging (SEP) is required. This SEP approves the sodium-filled tank for a single shipment from the 105-DR area to the 300 Area

Safety evaluation for packaging transportation of equipment for tank 241-C-106 waste sluicing system

International Nuclear Information System (INIS)

Calmus, D.B.

1994-01-01

A Waste Sluicing System (WSS) is scheduled for installation in nd waste storage tank 241-C-106 (106-C). The WSS will transfer high rating sludge from single shell tank 106-C to double shell waste tank 241-AY-102 (102-AY). Prior to installation of the WSS, a heel pump and a transfer pump will be removed from tank 106-C and an agitator pump will be removed from tank 102-AY. Special flexible receivers will be used to contain the pumps during removal from the tanks. After equipment removal, the flexible receivers will be placed in separate containers (packagings). The packaging and contents (packages) will be transferred from the Tank Farms to the Central Waste Complex (CWC) for interim storage and then to T Plant for evaluation and processing for final disposition. Two sizes of packagings will be provided for transferring the equipment from the Tank Farms to the interim storage facility. The packagings will be designated as the WSSP-1 and WSSP-2 packagings throughout the remainder of this Safety Evaluation for Packaging (SEP). The WSSP-1 packagings will transport the heel and transfer pumps from 106-C and the WSSP-2 packaging will transport the agitator pump from 102-AY. The WSSP-1 and WSSP-2 packagings are similar except for the length

Fragman: an R package for fragment analysis.

Science.gov (United States)

Covarrubias-Pazaran, Giovanny; Diaz-Garcia, Luis; Schlautman, Brandon; Salazar, Walter; Zalapa, Juan

2016-04-21

Determination of microsatellite lengths or other DNA fragment types is an important initial component of many genetic studies such as mutation detection, linkage and quantitative trait loci (QTL) mapping, genetic diversity, pedigree analysis, and detection of heterozygosity. A handful of commercial and freely available software programs exist for fragment analysis; however, most of them are platform dependent and lack high-throughput applicability. We present the R package Fragman to serve as a freely available and platform independent resource for automatic scoring of DNA fragment lengths diversity panels and biparental populations. The program analyzes DNA fragment lengths generated in Applied Biosystems® (ABI) either manually or automatically by providing panels or bins. The package contains additional tools for converting the allele calls to GenAlEx, JoinMap® and OneMap software formats mainly used for genetic diversity and generating linkage maps in plant and animal populations. Easy plotting functions and multiplexing friendly capabilities are some of the strengths of this R package. Fragment analysis using a unique set of cranberry (Vaccinium macrocarpon) genotypes based on microsatellite markers is used to highlight the capabilities of Fragman. Fragman is a valuable new tool for genetic analysis. The package produces equivalent results to other popular software for fragment analysis while possessing unique advantages and the possibility of automation for high-throughput experiments by exploiting the power of R.

CIRCE2/DEKGEN2: A software package for facilitated optical analysis of 3-D distributed solar energy concentrators. Theory and user manual

Energy Technology Data Exchange (ETDEWEB)

Romero, V.J.

1994-03-01

CIRCE2 is a computer code for modeling the optical performance of three-dimensional dish-type solar energy concentrators. Statistical methods are used to evaluate the directional distribution of reflected rays from any given point on the concentrator. Given concentrator and receiver geometries, sunshape (angular distribution of incident rays from the sun), and concentrator imperfections such as surface roughness and random deviation in slope, the code predicts the flux distribution and total power incident upon the target. Great freedom exists in the variety of concentrator and receiver configurations that can be modeled. Additionally, provisions for shading and receiver aperturing are included.- DEKGEN2 is a preprocessor designed to facilitate input of geometry, error distributions, and sun models. This manual describes the optical model, user inputs, code outputs, and operation of the software package. A user tutorial is included in which several collectors are built and analyzed in step-by-step examples.

Craniux: A LabVIEW-Based Modular Software Framework for Brain-Machine Interface Research

Science.gov (United States)

2011-01-01

open-source BMI software solu- tions are currently available, we feel that the Craniux software package fills a specific need in the realm of BMI...data, such as cortical source imaging using EEG or MEG recordings. It is with these characteristics in mind that we feel the Craniux software package...S. Adee, “Dean Kamen’s ‘luke arm’ prosthesis readies for clinical trials,” IEEE Spectrum, February 2008, http://spectrum .ieee.org/biomedical

Gammasphere software development. Progress report

Energy Technology Data Exchange (ETDEWEB)

Piercey, R.B.

1994-01-01

This report describes the activities of the nuclear physics group at Mississippi State University which were performed during 1993. Significant progress has been made in the focus areas: chairing the Gammasphere Software Working Group (SWG); assisting with the porting and enhancement of the ORNL UPAK histogramming software package; and developing standard formats for Gammasphere data products. In addition, they have established a new public ftp archive to distribute software and software development tools and information.

Multiphysics software and the challenge to validating physical models

International Nuclear Information System (INIS)

Luxat, J.C.

2008-01-01

This paper discusses multi physics software and validation of physical models in the nuclear industry. The major challenge is to convert the general purpose software package to a robust application-specific solution. This requires greater knowledge of the underlying solution techniques and the limitations of the packages. Good user interfaces and neat graphics do not compensate for any deficiencies

[The development and evaluation of software to verify diagnostic accuracy].

Science.gov (United States)

Jensen, Rodrigo; de Moraes Lopes, Maria Helena Baena; Silveira, Paulo Sérgio Panse; Ortega, Neli Regina Siqueira

2012-02-01

This article describes the development and evaluation of software that verifies the accuracy of diagnoses made by nursing students. The software was based on a model that uses fuzzy logic concepts, including PERL, the MySQL database for Internet accessibility, and the NANDA-I 2007-2008 classification system. The software was evaluated in terms of its technical quality and usability through specific instruments. The activity proposed in the software involves four stages in which students establish the relationship values between nursing diagnoses, defining characteristics/risk factors and clinical cases. The relationship values determined by students are compared to those of specialists, generating performance scores for the students. In the evaluation, the software demonstrated satisfactory outcomes regarding the technical quality and, according to the students, helped in their learning and may become an educational tool to teach the process of nursing diagnosis.

CONRAD—A software framework for cone-beam imaging in radiology

International Nuclear Information System (INIS)

Maier, Andreas; Choi, Jang-Hwan; Riess, Christian; Keil, Andreas; Fahrig, Rebecca; Hofmann, Hannes G.; Berger, Martin; Fischer, Peter; Schwemmer, Chris; Wu, Haibo; Müller, Kerstin; Hornegger, Joachim

2013-01-01

Purpose: In the community of x-ray imaging, there is a multitude of tools and applications that are used in scientific practice. Many of these tools are proprietary and can only be used within a certain lab. Often the same algorithm is implemented multiple times by different groups in order to enable comparison. In an effort to tackle this problem, the authors created CONRAD, a software framework that provides many of the tools that are required to simulate basic processes in x-ray imaging and perform image reconstruction with consideration of nonlinear physical effects.Methods: CONRAD is a Java-based state-of-the-art software platform with extensive documentation. It is based on platform-independent technologies. Special libraries offer access to hardware acceleration such as OpenCL. There is an easy-to-use interface for parallel processing. The software package includes different simulation tools that are able to generate up to 4D projection and volume data and respective vector motion fields. Well known reconstruction algorithms such as FBP, DBP, and ART are included. All algorithms in the package are referenced to a scientific source.Results: A total of 13 different phantoms and 30 processing steps have already been integrated into the platform at the time of writing. The platform comprises 74.000 nonblank lines of code out of which 19% are used for documentation. The software package is available for download at http://conrad.stanford.edu. To demonstrate the use of the package, the authors reconstructed images from two different scanners, a table top system and a clinical C-arm system. Runtimes were evaluated using the RabbitCT platform and demonstrate state-of-the-art runtimes with 2.5 s for the 256 problem size and 12.4 s for the 512 problem size.Conclusions: As a common software framework, CONRAD enables the medical physics community to share algorithms and develop new ideas. In particular this offers new opportunities for scientific collaboration and

“DETECTION ARTIFACTS” SOFTWARE PACKAGE: FUNCTIONAL CAPABILITIES AND PROSPECTS OF USING (ON THE EXAMPLE OF GEOARCHEOLOGICAL RESEARCH

Directory of Open Access Journals (Sweden)

Ye. P. Krupochkin

2017-01-01

Full Text Available Mathematical and scientific methods are highly significant in modern geoarcheological study. They contribute to the development of new computer technologies and their implementing in geoarcheological research in particular, decoding and photogrammetric processing of space images.The article focuses on the “Detection Artifacts”software package designed for thematic aerospace image decoding which is aimed at making the search automatic for various archeological sites, both natural and artificially created ones. The main attention is drawn to decoding of archeological sites using methods of morphological analysis and indicative decoding.Its work is based on two groups of methods of image computer processing: 1 an image enhancement method which is carried out with the help of spatial frequency filtration, and 2 a method of morphometric analysis. The methods of spatial frequency filtration can be used to solve two problems: information noise minimization and edge enhancement. To achieve the best results using the methods of spatial frequency filtration it is necessary to have all the information of relevance to the objects of searching.Searching for various archeological sites is not only photogrammetric task. In fact, this problem can be solved in the sphere of photogrammetry with the application of aerospace and computer methods. The authors stress the idea in order to avoid terminology ambiguity and confusion when describing the essence of the methods and processes. It should be noted that the work with the images must be executed in a strict sequence. First and foremost, photogrammetric processing – atmospheric correction, geometric adjustment, conversion and geo targeting should be implemented. And only after that one can proceed to decoding the information.When creating the software package a modular structure was applied that favorably affected the tasks being solved and corresponded to the conception of search for archaeological objects

Containment and surveillance for software

International Nuclear Information System (INIS)

Andress, J.C.; Adams, G.N.; Cotton, J.H.

1993-07-01

Some operators and state authorities are offering their computer systems, both hardware and software, to be used for safeguards purposes by the International Atomic Energy Agency. Therefore a need exists to develop a method of authenticating the data produced by a computer program before it can be used by the Agency. As part of a complete Computer Systems Authentication (COMSAT) package, a method of software containment and surveillance has been developed to compliment existing software authentication techniques. The package is applicable to both operator and Agency provided systems. A program to demonstrate the principles has been written. With this facility, the Agency will be able to leave unattended software in the field, either to be used by the operator to generate data for inspection on their own computer, or to save an inspector having to re-install inspection-specific software on an Agency computer, in the knowledge that the operation of the protected computer is being continuously monitored. If adopted, either of these uses will enable the Agency to reduce their costs. (Author)

ARM Data-Oriented Metrics and Diagnostics Package for Climate Model Evaluation Value-Added Product

Energy Technology Data Exchange (ETDEWEB)

Zhang, Chengzhu [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Xie, Shaocheng [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-15

A Python-based metrics and diagnostics package is currently being developed by the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Infrastructure Team at Lawrence Livermore National Laboratory (LLNL) to facilitate the use of long-term, high-frequency measurements from the ARM Facility in evaluating the regional climate simulation of clouds, radiation, and precipitation. This metrics and diagnostics package computes climatological means of targeted climate model simulation and generates tables and plots for comparing the model simulation with ARM observational data. The Coupled Model Intercomparison Project (CMIP) model data sets are also included in the package to enable model intercomparison as demonstrated in Zhang et al. (2017). The mean of the CMIP model can serve as a reference for individual models. Basic performance metrics are computed to measure the accuracy of mean state and variability of climate models. The evaluated physical quantities include cloud fraction, temperature, relative humidity, cloud liquid water path, total column water vapor, precipitation, sensible and latent heat fluxes, and radiative fluxes, with plan to extend to more fields, such as aerosol and microphysics properties. Process-oriented diagnostics focusing on individual cloud- and precipitation-related phenomena are also being developed for the evaluation and development of specific model physical parameterizations. The version 1.0 package is designed based on data collected at ARM’s Southern Great Plains (SGP) Research Facility, with the plan to extend to other ARM sites. The metrics and diagnostics package is currently built upon standard Python libraries and additional Python packages developed by DOE (such as CDMS and CDAT). The ARM metrics and diagnostic package is available publicly with the hope that it can serve as an easy entry point for climate modelers to compare their models with ARM data. In this report, we first present the input data, which

An update to the multitasking thermalhydraulics evaluation package

Energy Technology Data Exchange (ETDEWEB)

Guo, Y.; Leung, L.K.H.; Vasic, A. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)

2007-07-01

An update of the multitasking Thermalhydraulics Evaluation Package (TEP) was implemented to improve the prediction accuracy of critical heat flux (CHF) and post-dryout (PDO) heat transfer for 37-element fuel bundles. The improvement of prediction accuracy was achieved using the latest correlations for CHF and PDO heat transfer derived from fullscale bundle tests. The predictions of TEP were assessed against experimental data and good agreement has been observed. In addition to the improvement, the prediction capability of the package has been expanded to capture the effect of radial power profile on CHF for 37-element bundles. A correlation for the radial power profile effect on CHF has been implemented. It accounts for the deviation in CHF between the bundle of radial power profile of interest and the equivalent bundle of the natural uranium profile. (author)

Servicing HEP experiments with a complete set of ready integreated and configured common software components

International Nuclear Information System (INIS)

Roiser, Stefan; Gaspar, Ana; Perrin, Yves; Kruzelecki, Karol

2010-01-01

The LCG Applications Area at CERN provides basic software components for the LHC experiments such as ROOT, POOL, COOL which are developed in house and also a set of 'external' software packages (70) which are needed in addition such as Python, Boost, Qt, CLHEP, etc. These packages target many different areas of HEP computing such as data persistency, math, simulation, grid computing, databases, graphics, etc. Other packages provide tools for documentation, debugging, scripting languages and compilers. All these packages are provided in a consistent manner on different compilers, architectures and operating systems. The Software Process and Infrastructure project (SPI) [1] is responsible for the continous testing, coordination, release and deployment of these software packages. The main driving force for the actions carried out by SPI are the needs of the LHC experiments, but also other HEP experiments could profit from the set of consistent libraries provided and receive a stable and well tested foundation to build their experiment software frameworks. This presentation will first provide a brief description of the tools and services provided for the coordination, testing, release, deployment and presentation of LCG/AA software packages and then focus on a second set of tools provided for outside LHC experiments to deploy a stable set of HEP related software packages both as binary distribution or from source.

Servicing HEP experiments with a complete set of ready integreated and configured common software components

Energy Technology Data Exchange (ETDEWEB)

Roiser, Stefan; Gaspar, Ana; Perrin, Yves [CERN, CH-1211 Geneva 23, PH Department, SFT Group (Switzerland); Kruzelecki, Karol, E-mail: stefan.roiser@cern.c, E-mail: ana.gaspar@cern.c, E-mail: yves.perrin@cern.c, E-mail: karol.kruzelecki@cern.c [CERN, CH-1211 Geneva 23, PH Department, LBC Group (Switzerland)

2010-04-01

The LCG Applications Area at CERN provides basic software components for the LHC experiments such as ROOT, POOL, COOL which are developed in house and also a set of 'external' software packages (70) which are needed in addition such as Python, Boost, Qt, CLHEP, etc. These packages target many different areas of HEP computing such as data persistency, math, simulation, grid computing, databases, graphics, etc. Other packages provide tools for documentation, debugging, scripting languages and compilers. All these packages are provided in a consistent manner on different compilers, architectures and operating systems. The Software Process and Infrastructure project (SPI) [1] is responsible for the continous testing, coordination, release and deployment of these software packages. The main driving force for the actions carried out by SPI are the needs of the LHC experiments, but also other HEP experiments could profit from the set of consistent libraries provided and receive a stable and well tested foundation to build their experiment software frameworks. This presentation will first provide a brief description of the tools and services provided for the coordination, testing, release, deployment and presentation of LCG/AA software packages and then focus on a second set of tools provided for outside LHC experiments to deploy a stable set of HEP related software packages both as binary distribution or from source.

A multicenter study benchmarks software tools for label-free proteome quantification.

Science.gov (United States)

Navarro, Pedro; Kuharev, Jörg; Gillet, Ludovic C; Bernhardt, Oliver M; MacLean, Brendan; Röst, Hannes L; Tate, Stephen A; Tsou, Chih-Chiang; Reiter, Lukas; Distler, Ute; Rosenberger, George; Perez-Riverol, Yasset; Nesvizhskii, Alexey I; Aebersold, Ruedi; Tenzer, Stefan

2016-11-01

Consistent and accurate quantification of proteins by mass spectrometry (MS)-based proteomics depends on the performance of instruments, acquisition methods and data analysis software. In collaboration with the software developers, we evaluated OpenSWATH, SWATH 2.0, Skyline, Spectronaut and DIA-Umpire, five of the most widely used software methods for processing data from sequential window acquisition of all theoretical fragment-ion spectra (SWATH)-MS, which uses data-independent acquisition (DIA) for label-free protein quantification. We analyzed high-complexity test data sets from hybrid proteome samples of defined quantitative composition acquired on two different MS instruments using different SWATH isolation-window setups. For consistent evaluation, we developed LFQbench, an R package, to calculate metrics of precision and accuracy in label-free quantitative MS and report the identification performance, robustness and specificity of each software tool. Our reference data sets enabled developers to improve their software tools. After optimization, all tools provided highly convergent identification and reliable quantification performance, underscoring their robustness for label-free quantitative proteomics.

Structural evaluation of the Shippingport Reactor Pressure Vessel and Neutron Shield Tank package for impact and puncture loads

International Nuclear Information System (INIS)

Fischer, L.E.; Chou, C.K.; Lo, T.; Schwartz, M.W.

1988-06-01

A structural evaluation of Shippingport Reactor Pressure Vessel and Neutron Shield Tank package for impact and puncture loads under the normal and hypothetical accident conditions of 10 CFR 71 was performed. Component performance criteria for the Shippingport package and the corresponding structural acceptance criteria for these components were developed based on a review of the package geometry, the planned transport environment, and the external radiation standards and dispersal limits of 10 CFR 71. The evaluation was performed using structural analysis methods. A demonstration combining simplified model tests and nonlinear finite element analyses was made to substantiate the structural analysis methods used to evaluate the Shippingport package. The package was analyzed and the results indicate that the package meets external radiation standards and release limits of 10 CFR 71. 13 refs., 50 figs., 19 tabs

A software package for patient-specific dosimetry in the locoregional RIT of gliomas using 188Re labelled NIMOTUZUMAB

International Nuclear Information System (INIS)

Torres, L.A.; Coca, M.A.; Sanchez, Y.; Cornejo, N.; Catasus, C.; Denaro, M. de

2008-01-01

Full text: The locoregional treatment of high-grade gliomas using beta emitter compounds allows delivering high radiation doses in the tumor bed and the brain adjacent tissues of patients suffering these aggressive malignancies. The main goal of this work was to implement patient-specific dosimetry procedures using a voxel-based methodology in order to compute and analyze the three-dimensional doses distributions received by the patients undergoing loco-regional treatment of gliomas with the 188 Re labeled MAb NIMOTUZUMAB. A software package called TRIDOSE has been developed to perform the image managing, volume registration, dose calculations and qualitative and quantitative analysis of the results, including dose-volume histograms and isodose curves. The dosimetric factors at voxel level for 188 Re ('S' values) were estimated using two different methods, Monte Carlo simulations of energy transport and deposition and the integration of the dose kernel functions. A quality control module was also implemented in order to test the software using well-known 3D distribution of activities or counts. The TRIDOSE outputs were compared with other commercial software showing relative differences lower than 1.10% for different sphere sizes. The established dosimetric procedures constitute a useful tool to compute the absorbed doses received by patients undergoing radioimmunotherapy of brain tumors with 188 Re-NIMOTUZUMAB. (author)

Software Reviews.

Science.gov (United States)

Kinnaman, Daniel E.; And Others

1988-01-01

Reviews four educational software packages for Apple, IBM, and Tandy computers. Includes "How the West was One + Three x Four,""Mavis Beacon Teaches Typing,""Math and Me," and "Write On." Reviews list hardware requirements, emphasis, levels, publisher, purchase agreements, and price. Discusses the strengths…

Waste Package Lifting Calculation

International Nuclear Information System (INIS)

H. Marr

2000-01-01

The objective of this calculation is to evaluate the structural response of the waste package during the horizontal and vertical lifting operations in order to support the waste package lifting feature design. The scope of this calculation includes the evaluation of the 21 PWR UCF (pressurized water reactor uncanistered fuel) waste package, naval waste package, 5 DHLW/DOE SNF (defense high-level waste/Department of Energy spent nuclear fuel)--short waste package, and 44 BWR (boiling water reactor) UCF waste package. Procedure AP-3.12Q, Revision 0, ICN 0, calculations, is used to develop and document this calculation

Fermenter control and modelling system. Online Kopplung von Standard-Software zur Modellierung von biologischen Prozessen

Energy Technology Data Exchange (ETDEWEB)

Goldschmidt, B [Halle-Wittenberg Univ., Halle (Germany). Inst. fuer Bioprozesstechnik; Diehl, U; Lauterbach, U [Diessel Biotech GmbH, Melsungen (Germany)

1991-10-01

The development and operation of small biotechnological plants increasingly requires process control technique, which is both powerful and robust, but at the same time flexible. One criterion for the performance of a process control system is its ability to process and evaluate online process data project specifically. This contribution describes this for the control system Micro-MFCS and its coupling with a Modelling System. The Modelling System is a software package for the acquisition, processing and evaluating of data from biochemical, chemical and physico-technical experiments. It was developed at the Martin-Luther-University in Halle (Germany) and offers the features: Simulation of fermentation processes using mathematical models and fitting of mathematical models to fermentation processes. In the context of a joint project the online coupling of the software package Micro-MFCS and Modelling System was realised. (orig.).

SCALE criticality safety verification and validation package

International Nuclear Information System (INIS)

Bowman, S.M.; Emmett, M.B.; Jordan, W.C.

1998-01-01

Verification and validation (V and V) are essential elements of software quality assurance (QA) for computer codes that are used for performing scientific calculations. V and V provides a means to ensure the reliability and accuracy of such software. As part of the SCALE QA and V and V plans, a general V and V package for the SCALE criticality safety codes has been assembled, tested and documented. The SCALE criticality safety V and V package is being made available to SCALE users through the Radiation Safety Information Computational Center (RSICC) to assist them in performing adequate V and V for their SCALE applications

An evaluation of the psychometric properties of the Purdue Pharmacist Directive Guidance Scale using SPSS and R software packages.

Science.gov (United States)

Marr-Lyon, Lisa R; Gupchup, Gireesh V; Anderson, Joe R

2012-01-01

The Purdue Pharmacist Directive Guidance (PPDG) Scale was developed to assess patients' perceptions of the level of pharmacist-provided (1) instruction and (2) feedback and goal-setting-2 aspects of pharmaceutical care. Calculations of its psychometric properties stemming from SPSS and R were similar, but distinct differences were apparent. Using SPSS and R software packages, researchers aimed to examine the construct validity of the PPDG using a higher order factoring procedure; in tandem, McDonald's omega and Cronbach's alpha were calculated as means of reliability analyses. Ninety-nine patients with either type I or type II diabetes, aged 18 years or older, able to read and write English, and who could provide written-informed consent participated in the study. Data were collected in 8 community pharmacies in New Mexico. Using R, (1) a principal axis factor analysis with promax (oblique) rotation was conducted, (2) a Schmid-Leiman transformation was attained, and (3) McDonald's omega and Cronbach's alpha were computed. Using SPSS, subscale findings were validated by conducting a principal axis factor analysis with promax rotation; strict parallels and Cronbach's alpha reliabilities were calculated. McDonald's omega and Cronbach's alpha were robust, with coefficients greater than 0.90; principal axis factor analysis with promax rotation revealed construct similarities with an overall general factor emerging from R. Further subjecting the PPDG to rigorous psychometric testing revealed stronger quantitative support of the overall general factor of directive guidance and subscales of instruction and feedback and goal-setting. Copyright © 2012 Elsevier Inc. All rights reserved.

The MEDA Project: Developing Evaluation Competence in the Training Software Domain.

Science.gov (United States)

Machell, Joan; Saunders, Murray

1992-01-01

The MEDA (Methodologie d'Evaluation des Didacticiels pour les Adultes) tool is a generic instrument to evaluate training courseware. It was developed for software designers to improve products, for instructors to select appropriate courseware, and for distributors and consultants to match software to client needs. Describes software evaluation…

Development of evaluation method for software safety analysis techniques

International Nuclear Information System (INIS)

Huang, H.; Tu, W.; Shih, C.; Chen, C.; Yang, W.; Yih, S.; Kuo, C.; Chen, M.

2006-01-01

Full text: Full text: Following the massive adoption of digital Instrumentation and Control (I and C) system for nuclear power plant (NPP), various Software Safety Analysis (SSA) techniques are used to evaluate the NPP safety for adopting appropriate digital I and C system, and then to reduce risk to acceptable level. However, each technique has its specific advantage and disadvantage. If the two or more techniques can be complementarily incorporated, the SSA combination would be more acceptable. As a result, if proper evaluation criteria are available, the analyst can then choose appropriate technique combination to perform analysis on the basis of resources. This research evaluated the applicable software safety analysis techniques nowadays, such as, Preliminary Hazard Analysis (PHA), Failure Modes and Effects Analysis (FMEA), Fault Tree Analysis (FTA), Markov chain modeling, Dynamic Flowgraph Methodology (DFM), and simulation-based model analysis; and then determined indexes in view of their characteristics, which include dynamic capability, completeness, achievability, detail, signal/ noise ratio, complexity, and implementation cost. These indexes may help the decision makers and the software safety analysts to choose the best SSA combination arrange their own software safety plan. By this proposed method, the analysts can evaluate various SSA combinations for specific purpose. According to the case study results, the traditional PHA + FMEA + FTA (with failure rate) + Markov chain modeling (without transfer rate) combination is not competitive due to the dilemma for obtaining acceptable software failure rates. However, the systematic architecture of FTA and Markov chain modeling is still valuable for realizing the software fault structure. The system centric techniques, such as DFM and Simulation-based model analysis, show the advantage on dynamic capability, achievability, detail, signal/noise ratio. However, their disadvantage are the completeness complexity

Development of high performance scientific components for interoperability of computing packages

Energy Technology Data Exchange (ETDEWEB)

Gulabani, Teena Pratap [Iowa State Univ., Ames, IA (United States)

2008-01-01

Three major high performance quantum chemistry computational packages, NWChem, GAMESS and MPQC have been developed by different research efforts following different design patterns. The goal is to achieve interoperability among these packages by overcoming the challenges caused by the different communication patterns and software design of each of these packages. A chemistry algorithm is hard to develop as well as being a time consuming process; integration of large quantum chemistry packages will allow resource sharing and thus avoid reinvention of the wheel. Creating connections between these incompatible packages is the major motivation of the proposed work. This interoperability is achieved by bringing the benefits of Component Based Software Engineering through a plug-and-play component framework called Common Component Architecture (CCA). In this thesis, I present a strategy and process used for interfacing two widely used and important computational chemistry methodologies: Quantum Mechanics and Molecular Mechanics. To show the feasibility of the proposed approach the Tuning and Analysis Utility (TAU) has been coupled with NWChem code and its CCA components. Results show that the overhead is negligible when compared to the ease and potential of organizing and coping with large-scale software applications.

Report of AAPM Task Group 162: Software for planar image quality metrology.

Science.gov (United States)

Samei, Ehsan; Ikejimba, Lynda C; Harrawood, Brian P; Rong, John; Cunningham, Ian A; Flynn, Michael J

2018-02-01

The AAPM Task Group 162 aimed to provide a standardized approach for the assessment of image quality in planar imaging systems. This report offers a description of the approach as well as the details of the resultant software bundle to measure detective quantum efficiency (DQE) as well as its basis components and derivatives. The methodology and the associated software include the characterization of the noise power spectrum (NPS) from planar images acquired under specific acquisition conditions, modulation transfer function (MTF) using an edge test object, the DQE, and effective DQE (eDQE). First, a methodological framework is provided to highlight the theoretical basis of the work. Then, a step-by-step guide is included to assist in proper execution of each component of the code. Lastly, an evaluation of the method is included to validate its accuracy against model-based and experimental data. The code was built using a Macintosh OSX operating system. The software package contains all the source codes to permit an experienced user to build the suite on a Linux or other *nix type system. The package further includes manuals and sample images and scripts to demonstrate use of the software for new users. The results of the code are in close alignment with theoretical expectations and published results of experimental data. The methodology and the software package offered in AAPM TG162 can be used as baseline for characterization of inherent image quality attributes of planar imaging systems. © 2017 American Association of Physicists in Medicine.

Usability study of clinical exome analysis software: top lessons learned and recommendations.

Science.gov (United States)

Shyr, Casper; Kushniruk, Andre; Wasserman, Wyeth W

2014-10-01

New DNA sequencing technologies have revolutionized the search for genetic disruptions. Targeted sequencing of all protein coding regions of the genome, called exome analysis, is actively used in research-oriented genetics clinics, with the transition to exomes as a standard procedure underway. This transition is challenging; identification of potentially causal mutation(s) amongst ∼10(6) variants requires specialized computation in combination with expert assessment. This study analyzes the usability of user interfaces for clinical exome analysis software. There are two study objectives: (1) To ascertain the key features of successful user interfaces for clinical exome analysis software based on the perspective of expert clinical geneticists, (2) To assess user-system interactions in order to reveal strengths and weaknesses of existing software, inform future design, and accelerate the clinical uptake of exome analysis. Surveys, interviews, and cognitive task analysis were performed for the assessment of two next-generation exome sequence analysis software packages. The subjects included ten clinical geneticists who interacted with the software packages using the "think aloud" method. Subjects' interactions with the software were recorded in their clinical office within an urban research and teaching hospital. All major user interface events (from the user interactions with the packages) were time-stamped and annotated with coding categories to identify usability issues in order to characterize desired features and deficiencies in the user experience. We detected 193 usability issues, the majority of which concern interface layout and navigation, and the resolution of reports. Our study highlights gaps in specific software features typical within exome analysis. The clinicians perform best when the flow of the system is structured into well-defined yet customizable layers for incorporation within the clinical workflow. The results highlight opportunities to

dartr: An r package to facilitate analysis of SNP data generated from reduced representation genome sequencing.

Science.gov (United States)

Gruber, Bernd; Unmack, Peter J; Berry, Oliver F; Georges, Arthur

2018-05-01

Although vast technological advances have been made and genetic software packages are growing in number, it is not a trivial task to analyse SNP data. We announce a new r package, dartr, enabling the analysis of single nucleotide polymorphism data for population genomic and phylogenomic applications. dartr provides user-friendly functions for data quality control and marker selection, and permits rigorous evaluations of conformation to Hardy-Weinberg equilibrium, gametic-phase disequilibrium and neutrality. The package reports standard descriptive statistics, permits exploration of patterns in the data through principal components analysis and conducts standard F-statistics, as well as basic phylogenetic analyses, population assignment, isolation by distance and exports data to a variety of commonly used downstream applications (e.g., newhybrids, faststructure and phylogeny applications) outside of the r environment. The package serves two main purposes: first, a user-friendly approach to lower the hurdle to analyse such data-therefore, the package comes with a detailed tutorial targeted to the r beginner to allow data analysis without requiring deep knowledge of r. Second, we use a single, well-established format-genlight from the adegenet package-as input for all our functions to avoid data reformatting. By strictly using the genlight format, we hope to facilitate this format as the de facto standard of future software developments and hence reduce the format jungle of genetic data sets. The dartr package is available via the r CRAN network and GitHub. © 2017 John Wiley & Sons Ltd.

Software Reviews.

Science.gov (United States)

Teles, Elizabeth, Ed.; And Others

1990-01-01

Reviewed are two computer software packages for Macintosh microcomputers including "Phase Portraits," an exploratory graphics tool for studying first-order planar systems; and "MacMath," a set of programs for exploring differential equations, linear algebra, and other mathematical topics. Features, ease of use, cost, availability, and hardware…

Reviews, Software.

Science.gov (United States)

Science Teacher, 1988

1988-01-01

Reviews two computer software packages for use in physical science, physics, and chemistry classes. Includes "Physics of Model Rocketry" for Apple II, and "Black Box" for Apple II and IBM compatible computers. "Black Box" is designed to help students understand the concept of indirect evidence. (CW)

Safety evaluation for packaging (onsite) plutonium recycle test reactor graphite cask

Energy Technology Data Exchange (ETDEWEB)

Romano, T.

1997-09-29

This safety evaluation for packaging (SEP) provides the evaluation necessary to demonstrate that the Plutonium Recycle Test Reactor (PRTR) Graphite Cask meets the requirements of WHC-CM-2-14, Hazardous Material Packaging and Shipping, for transfer of Type B, fissile, non-highway route controlled quantities of radioactive material within the 300 Area of the Hanford Site. The scope of this SEP includes risk, shieldling, criticality, and.tiedown analyses to demonstrate that onsite transportation safety requirements are satisfied. This SEP also establishes operational and maintenance guidelines to ensure that transport of the PRTR Graphite Cask is performed safely in accordance with WHC-CM-2-14. This SEP is valid until October 1, 1999. After this date, an update or upgrade to this document is required.

Safety evaluation for packaging (onsite) plutonium recycle test reactor graphite cask

International Nuclear Information System (INIS)

Romano, T.

1997-01-01

This safety evaluation for packaging (SEP) provides the evaluation necessary to demonstrate that the Plutonium Recycle Test Reactor (PRTR) Graphite Cask meets the requirements of WHC-CM-2-14, Hazardous Material Packaging and Shipping, for transfer of Type B, fissile, non-highway route controlled quantities of radioactive material within the 300 Area of the Hanford Site. The scope of this SEP includes risk, shieldling, criticality, and.tiedown analyses to demonstrate that onsite transportation safety requirements are satisfied. This SEP also establishes operational and maintenance guidelines to ensure that transport of the PRTR Graphite Cask is performed safely in accordance with WHC-CM-2-14. This SEP is valid until October 1, 1999. After this date, an update or upgrade to this document is required

GENII Version 2 Software Design Document

Energy Technology Data Exchange (ETDEWEB)

Napier, Bruce A.; Strenge, Dennis L.; Ramsdell, James V.; Eslinger, Paul W.; Fosmire, Christian J.

2004-03-08

This document describes the architectural design for the GENII-V2 software package. This document defines details of the overall structure of the software, the major software components, their data file interfaces, and specific mathematical models to be used. The design represents a translation of the requirements into a description of the software structure, software components, interfaces, and necessary data. The design focuses on the major components and data communication links that are key to the implementation of the software within the operating framework. The purpose of the GENII-V2 software package is to provide the capability to perform dose and risk assessments of environmental releases of radionuclides. The software also has the capability of calculating environmental accumulation and radiation doses from surface water, groundwater, and soil (buried waste) media when an input concentration of radionuclide in these media is provided. This report represents a detailed description of the capabilities of the software product with exact specifications of mathematical models that form the basis for the software implementation and testing efforts. This report also presents a detailed description of the overall structure of the software package, details of main components (implemented in the current phase of work), details of data communication files, and content of basic output reports. The GENII system includes the capabilities for calculating radiation doses following chronic and acute releases. Radionuclide transport via air, water, or biological activity may be considered. Air transport options include both puff and plume models, each allow use of an effective stack height or calculation of plume rise from buoyant or momentum effects (or both). Building wake effects can be included in acute atmospheric release scenarios. The code provides risk estimates for health effects to individuals or populations; these can be obtained using the code by applying

Image analysis software versus direct anthropometry for breast measurements.

Science.gov (United States)

Quieregatto, Paulo Rogério; Hochman, Bernardo; Furtado, Fabianne; Machado, Aline Fernanda Perez; Sabino Neto, Miguel; Ferreira, Lydia Masako

2014-10-01

To compare breast measurements performed using the software packages ImageTool(r), AutoCAD(r) and Adobe Photoshop(r) with direct anthropometric measurements. Points were marked on the breasts and arms of 40 volunteer women aged between 18 and 60 years. When connecting the points, seven linear segments and one angular measurement on each half of the body, and one medial segment common to both body halves were defined. The volunteers were photographed in a standardized manner. Photogrammetric measurements were performed by three independent observers using the three software packages and compared to direct anthropometric measurements made with calipers and a protractor. Measurements obtained with AutoCAD(r) were the most reproducible and those made with ImageTool(r) were the most similar to direct anthropometry, while measurements with Adobe Photoshop(r) showed the largest differences. Except for angular measurements, significant differences were found between measurements of line segments made using the three software packages and those obtained by direct anthropometry. AutoCAD(r) provided the highest precision and intermediate accuracy; ImageTool(r) had the highest accuracy and lowest precision; and Adobe Photoshop(r) showed intermediate precision and the worst accuracy among the three software packages.

Software qualification of selected TOUGH2 modules

International Nuclear Information System (INIS)

Wu, Y.S.; Ahlers, C.F.; Fraser, P.; Simmons, A.; Pruess, K.

1996-10-01

The purpose of this package of reports is to provide all software baseline documents necessary for the software qualification of the single-phase Gas (EOS1G), Effective Continuum Method (ECM), Saturated/Unsaturated Flow (EOS9), and Radionuclide Transport (T2R3D) modules of TOUGH2, a numerical simulation code for multi-dimensional coupled fluid and heat flow of multiphase, multicomponent fluid mixtures in porous and fractured media. This report contains the following sections: (1) Requirements Specification, (2) Design Description, (3) Software Validation Test Plan and Report, (4) Software User Documentation, and (5) Appendices. These sections comprise sequential parts of the Software Life Cycle, and are not intended to stand alone but should be used in conjunction with the TOUGH User's Guide (Pruess, 1987), TOUGH2--A General Purpose Numerical Simulator for Multiphase Fluid and Heat Flow (Pruess, 1991), and the above-referenced TOUGH2 software qualification document. The qualification package is complete with the attached Software Identification Form and executable source code for the single-phase Gas, Effective Continuum method, Saturated/Unsaturated Flow, and Radionuclide Transport modules of TOUGH2

Software for microcircuit systems

International Nuclear Information System (INIS)

Kunz, P.F.

1978-10-01

Modern Large Scale Integration (LSI) microcircuits are meant to be programed in order to control the function that they perform. The basics of microprograming and new microcircuits have already been discussed. In this course, the methods of developing software for these microcircuits are explored. This generally requires a package of support software in order to assemble the microprogram, and also some amount of support software to test the microprograms and to test the microprogramed circuit itself. 15 figures, 2 tables

Preliminary safety evaluation for the plutonium stabilization and packaging system

International Nuclear Information System (INIS)

Shapley, J.E.

1997-01-01

This Preliminary Safety Evaluation (PSE) describes and analyzes the installation and operation of the Plutonium Stabilization and Packaging System (SPS) at the Plutonium Finishing Plant (PFP). The SPS is a combination of components required to expedite the safe and timely storage of Plutonium (Pu) oxide. The SPS program will receive site Pu packages, process the Pu for storage, package the Pu into metallic containers, and safely store the containers in a specially modified storage vault. The location of the SPS will be in the 2736- ZB building and the storage vaults will be in the 2736-Z building of the PFP, as shown in Figure 1-1. The SPS will produce storage canisters that are larger than those currently used for Pu storage at the PFP. Therefore, the existing storage areas within the PFP secure vaults will require modification. Other modifications will be performed on the 2736-ZB building complex to facilitate the installation and operation of the SPS

BEANS - a software package for distributed Big Data analysis

Science.gov (United States)

Hypki, Arkadiusz

2018-03-01

BEANS software is a web based, easy to install and maintain, new tool to store and analyse in a distributed way a massive amount of data. It provides a clear interface for querying, filtering, aggregating, and plotting data from an arbitrary number of datasets. Its main purpose is to simplify the process of storing, examining and finding new relations in huge datasets. The software is an answer to a growing need of the astronomical community to have a versatile tool to store, analyse and compare the complex astrophysical numerical simulations with observations (e.g. simulations of the Galaxy or star clusters with the Gaia archive). However, this software was built in a general form and it is ready to use in any other research field. It can be used as a building block for other open source software too.

Informed-Proteomics: open-source software package for top-down proteomics

Energy Technology Data Exchange (ETDEWEB)

Park, Jungkap; Piehowski, Paul D.; Wilkins, Christopher; Zhou, Mowei; Mendoza, Joshua; Fujimoto, Grant M.; Gibbons, Bryson C.; Shaw, Jared B.; Shen, Yufeng; Shukla, Anil K.; Moore, Ronald J.; Liu, Tao; Petyuk, Vladislav A.; Tolić, Nikola; Paša-Tolić, Ljiljana; Smith, Richard D.; Payne, Samuel H.; Kim, Sangtae

2017-08-07

Top-down proteomics involves the analysis of intact proteins. This approach is very attractive as it allows for analyzing proteins in their endogenous form without proteolysis, preserving valuable information about post-translation modifications, isoforms, proteolytic processing or their combinations collectively called proteoforms. Moreover, the quality of the top-down LC-MS/MS datasets is rapidly increasing due to advances in the liquid chromatography and mass spectrometry instrumentation and sample processing protocols. However, the top-down mass spectra are substantially more complex compare to the more conventional bottom-up data. To take full advantage of the increasing quality of the top-down LC-MS/MS datasets there is an urgent need to develop algorithms and software tools for confident proteoform identification and quantification. In this study we present a new open source software suite for top-down proteomics analysis consisting of an LC-MS feature finding algorithm, a database search algorithm, and an interactive results viewer. The presented tool along with several other popular tools were evaluated using human-in-mouse xenograft luminal and basal breast tumor samples that are known to have significant differences in protein abundance based on bottom-up analysis.

Customer configuration updating in a software supply network

NARCIS (Netherlands)

Jansen, S.R.L.

2007-01-01

Product software development is the activity of development, modification, reuse, re-engineering, maintenance, or any other activities that result in packaged configurations of software components or software-based services that are released for and traded in a specific market \\cite{XuBrinkkemper}.

Criteria for the selection of ERP software

Directory of Open Access Journals (Sweden)

2007-01-01

Full Text Available The implementation of an ERP software package is an important investment for an organization, which is characterized also by a high degree of risk. Selecting the most appropriate software is a necessary condition for a successful implementation. This paper is describing the major aspects of software selection in general and the relevant criteria in the case of ERP software.

Software Review.

Science.gov (United States)

McGrath, Diane, Ed.

1989-01-01

Reviewed is a computer software package entitled "Audubon Wildlife Adventures: Grizzly Bears" for Apple II and IBM microcomputers. Included are availability, hardware requirements, cost, and a description of the program. The murder-mystery flavor of the program is stressed in this program that focuses on illegal hunting and game…

Study of evaluation techniques of software configuration management and reliability

Energy Technology Data Exchange (ETDEWEB)

Youn, Cheong; Baek, Y. W.; Kim, H. C.; Han, H. C.; Choi, C. R. [Chungnam National Univ., Taejon (Korea, Republic of)

2001-03-15

The Study of activities to solve software safety and quality must be executed in base of establishing software development process for digitalized nuclear plant. Especially study of software testing and Verification and Validation must executed. For this purpose methodologies and tools which can improve software qualities are evaluated and software Testing, V and V and Configuration Management which can be applied to software life cycle are investigated. This study establish a guideline that can be used to assure software safety and reliability requirements in digitalized nuclear plant systems.

Ensuring system security through formal software evaluation

Energy Technology Data Exchange (ETDEWEB)

Howell, J A; Fuyat, C [Los Alamos National Lab., NM (United States); Elvy, M [Marble Associates, Boston, MA (United States)

1992-01-01

With the increasing use of computer systems and networks to process safeguards information in nuclear facilities, the issue of system and data integrity is receiving worldwide attention. Among the many considerations are validation that the software performs as intended and that the information is adequately protected. Such validations are often requested of the Safeguards Systems Group of the Los Alamos National Laboratory. This paper describes our methodology for performing these software evaluations.

Design and Implement a MapReduce Framework for Executing Standalone Software Packages in Hadoop-based Distributed Environments

Directory of Open Access Journals (Sweden)

Chao-Chun Chen

2013-12-01

Full Text Available The Hadoop MapReduce is the programming model of designing the auto scalable distributed computing applications. It provides developer an effective environment to attain automatic parallelization. However, most existing manufacturing systems are arduous and restrictive to migrate to MapReduce private cloud, due to the platform incompatible and tremendous complexity of system reconstruction. For increasing the efficiency of manufacturing systems with minimum modification of existing systems, we design a framework in this thesis, called MC-Framework: Multi-uses-based Cloudizing-Application Framework. It provides the simple interface to users for fairly executing requested tasks worked with traditional standalone software packages in MapReduce-based private cloud environments. Moreover, this thesis focuses on the multiuser workloads, but the default Hadoop scheduling scheme, i.e., FIFO, would increase delay under multiuser scenarios. Hence, we also propose a new scheduling mechanism, called Job-Sharing Scheduling, to explore and fairly share the jobs to machines in the MapReduce-based private cloud. Then, we prototype an experimental virtual-metrology module of a manufacturing system as a case study to verify and analysis the proposed MC-Framework. The results of our experiments indicate that our proposed framework enormously improved the time performance compared with the original package.

Radioactivity evaluation method for pre-packed concrete packages of low-level dry active wastes

International Nuclear Information System (INIS)

Sakai, Toshiaki; Funahashi, Tetsuo; Watabe, Kiyomi; Ozawa, Yukitoshi; Kashiwagi, Makoto

1998-01-01

Low-level dry active wastes of nuclear power plants are grouted with cement mortal in a container and planned to disposed into the shallow land disposal site. The characteristics of radionuclides contained in dry active wastes are same as homogeneous solidified wastes. In the previous report, we reported the applicability of the radioactivity evaluation methods established for homogeneous solidified wastes to pre-packed concrete packages. This report outlines the developed radioactivity evaluation methods for pre-packed concrete packages based upon recent data. Since the characteristics of dry active wastes depend upon the plant system in which dry active wastes originate and the types of contamination, sampling of wastes and activity measurement were executed to derive scaling factors. The radioactivity measurement methods were also verified. The applicability of non-destructive methods to measure radioactivity concentration of pre-packed concrete packages was examined by computer simulation. It is concluded that those methods are accurate enough to measure actual waste packages. (author)

A process control software package for the SRS

International Nuclear Information System (INIS)

Atkins, V.R.; Poole, D.E.; Rawlinson, W.R.

1980-03-01

The development of software to give high level access from application programs for monitoring and control of the Daresbury Synchrotron Radiation Source on a network-wide basis is described. The design and implementation of the control system database, a special supervisor call and and 'executive' type task handling of all process input/output services for the 7/32 (which runs under 05/32-MT), and process control 'device driver' software for the 7/16 (run under L5/16-MT) are included. (UK)

Software development for a switch-based data acquisition system

Energy Technology Data Exchange (ETDEWEB)

Booth, A. (Superconducting Super Collider Lab., Dallas, TX (United States)); Black, D.; Walsh, D. (Fermi National Accelerator Lab., Batavia, IL (United States))

1991-12-01

We report on the software aspects of the development of a switch-based data acquisition system at Fermilab. This paper describes how, with the goal of providing an integrated systems engineering'' environment, several powerful software tools were put in place to facilitate extensive exploration of all aspects of the design. These tools include a simulation package, graphics package and an Expert System shell which have been integrated to provide an environment which encourages the close interaction of hardware and software engineers. This paper includes a description of the simulation, user interface, embedded software, remote procedure calls, and diagnostic software which together have enabled us to provide real-time control and monitoring of a working prototype switch-based data acquisition (DAQ) system.

DSISoft—a MATLAB VSP data processing package

Science.gov (United States)

Beaty, K. S.; Perron, G.; Kay, I.; Adam, E.

2002-05-01

DSISoft is a public domain vertical seismic profile processing software package developed at the Geological Survey of Canada. DSISoft runs under MATLAB version 5.0 and above and hence is portable between computer operating systems supported by MATLAB (i.e. Unix, Windows, Macintosh, Linux). The package includes processing modules for reading and writing various standard seismic data formats, performing data editing, sorting, filtering, and other basic processing modules. The processing sequence can be scripted allowing batch processing and easy documentation. A structured format has been developed to ensure future additions to the package are compatible with existing modules. Interactive modules have been created using MATLAB's graphical user interface builder for displaying seismic data, picking first break times, examining frequency spectra, doing f- k filtering, and plotting the trace header information. DSISoft modular design facilitates the incorporation of new processing algorithms as they are developed. This paper gives an overview of the scope of the software and serves as a guide for the addition of new modules.

Software for a measuring facility for activation analysis

International Nuclear Information System (INIS)

De Keyser, A.; De Roost, E.

1985-01-01

A software package has been developed for an APPLE P.C. The programs are intended to control an automated measuring station for photon activation analysis at GELINA, the linear accelerator of C.B.N.M. at Geel (Belgium). They allow to set-up a measuring scheme, to execute it under computer control, to accumulate and store 2 K-spectra using a built-in ADC and to output the results as listings, plots or evaluated reports

Use Case Evaluation (UCE): A Method for Early Usability Evaluation in Software Development

DEFF Research Database (Denmark)

Stage, Jan; Høegh, Rune Thaarup; Hornbæk, K.

2007-01-01

t is often argued that usability problems should be identified as early as possible during software development, but many usability evaluation methods do not fit well in early development activities. We propose a method for usability evaluation of use cases, a widely used representation of design...... ideas produced early in software development processes. The method proceeds by systematic inspection of use cases with reference to a set of guidelines for usable design. To validate the method, four evaluators inspected a set of use cases for a health care application....

TopView - ATLAS top physics analysis package

CERN Document Server

Shibata, A

2007-01-01

TopView is a common analysis package which is widely used in the ATLAS top physics working group. The package is fully based on the official ATLAS software Athena and EventView and playing a central role in the collaborative analysis model. It is a functional package which accounts for a broad range issues in implementing physics analysis. As well as being a modular framework suitable as a common workplace for collaborators, TopView implements numerous analysis tools including a complete top-antitop reconstruction and single top reconstruction. The package is currently used to produce common ntuple from Monte Carlo production and future use cases are under rapid development. In this paper, the design and ideas behind TopView and the performance of the analyses implemented in the package are presented with detailed documentation of the contents and instruction for using the package.

The IronChip evaluation package: a package of perl modules for robust analysis of custom microarrays

Directory of Open Access Journals (Sweden)

Brazma Alvis

2010-03-01

Full Text Available Abstract Background Gene expression studies greatly contribute to our understanding of complex relationships in gene regulatory networks. However, the complexity of array design, production and manipulations are limiting factors, affecting data quality. The use of customized DNA microarrays improves overall data quality in many situations, however, only if for these specifically designed microarrays analysis tools are available. Results The IronChip Evaluation Package (ICEP is a collection of Perl utilities and an easy to use data evaluation pipeline for the analysis of microarray data with a focus on data quality of custom-designed microarrays. The package has been developed for the statistical and bioinformatical analysis of the custom cDNA microarray IronChip but can be easily adapted for other cDNA or oligonucleotide-based designed microarray platforms. ICEP uses decision tree-based algorithms to assign quality flags and performs robust analysis based on chip design properties regarding multiple repetitions, ratio cut-off, background and negative controls. Conclusions ICEP is a stand-alone Windows application to obtain optimal data quality from custom-designed microarrays and is freely available here (see "Additional Files" section and at: http://www.alice-dsl.net/evgeniy.vainshtein/ICEP/

Effective organizational solutions for implementation of DBMS software packages

Science.gov (United States)

Jones, D.

1984-01-01

The space telescope management information system development effort is a guideline for discussing effective organizational solutions used in implementing DBMS software. Focus is on the importance of strategic planning. The value of constructing an information system architecture to conform to the organization's managerial needs, the need for a senior decision maker, dealing with shifting user requirements, and the establishment of a reliable working relationship with the DBMS vendor are examined. Requirements for a schedule to demonstrate progress against a defined timeline and the importance of continued monitoring for production software control, production data control, and software enhancements are also discussed.

AN ADA NAMELIST PACKAGE

Science.gov (United States)

Klumpp, A. R.

1994-01-01

The Ada Namelist Package, developed for the Ada programming language, enables a calling program to read and write FORTRAN-style namelist files. A namelist file consists of any number of assignment statements in any order. Features of the Ada Namelist Package are: the handling of any combination of user-defined types; the ability to read vectors, matrices, and slices of vectors and matrices; the handling of mismatches between variables in the namelist file and those in the programmed list of namelist variables; and the ability to avoid searching the entire input file for each variable. The principle user benefits of this software are the following: the ability to write namelist-readable files, the ability to detect most file errors in the initialization phase, a package organization that reduces the number of instantiated units to a few packages rather than to many subprograms, a reduced number of restrictions, and an increased execution speed. The Ada Namelist reads data from an input file into variables declared within a user program. It then writes data from the user program to an output file, printer, or display. The input file contains a sequence of assignment statements in arbitrary order. The output is in namelist-readable form. There is a one-to-one correspondence between namelist I/O statements executed in the user program and variables read or written. Nevertheless, in the input file, mismatches are allowed between assignment statements in the file and the namelist read procedure statements in the user program. The Ada Namelist Package itself is non-generic. However, it has a group of nested generic packages following the nongeneric opening portion. The opening portion declares a variety of useraccessible constants, variables and subprograms. The subprograms are procedures for initializing namelists for reading, reading and writing strings. The subprograms are also functions for analyzing the content of the current dataset and diagnosing errors. Two nested

Software Platform Evaluation - Verifiable Fuel Cycle Simulation (VISION) Model

International Nuclear Information System (INIS)

J. J. Jacobson; D. E. Shropshire; W. B. West

2005-01-01

The purpose of this Software Platform Evaluation (SPE) is to document the top-level evaluation of potential software platforms on which to construct a simulation model that satisfies the requirements for a Verifiable Fuel Cycle Simulation Model (VISION) of the Advanced Fuel Cycle (AFC). See the Software Requirements Specification for Verifiable Fuel Cycle Simulation (VISION) Model (INEEL/EXT-05-02643, Rev. 0) for a discussion of the objective and scope of the VISION model. VISION is intended to serve as a broad systems analysis and study tool applicable to work conducted as part of the AFCI (including costs estimates) and Generation IV reactor development studies. This document will serve as a guide for selecting the most appropriate software platform for VISION. This is a ''living document'' that will be modified over the course of the execution of this work

k0IAEA software validation at CDTN/CNEN, Brazil, using certified reference materials

International Nuclear Information System (INIS)

Menezes, M.A.B.C.; Jacimovic, R.

2007-01-01

The IAEA distributed the k 0I AEA software package program to several laboratories. The Laboratory for Neutron Activation Analysis, at CDTN/CNEN (Centro de Desenvolvimento da Tecnologia Nuclear/Comissao Nacional de Energia Nuclear), Belo Horizonte, Brazil, acquired the k 0I AEA software package during the Workshop on Nuclear Data for Activation Analysis, 2005, held at the Abdus Salam International Centre for Theoretical Physics, Trieste, Italy. This paper is about the validation procedure carried out at the local laboratory aiming at the validation of the k 0I AEA software package. After the software was set up according to the guidelines, the procedure followed at CDTN/CNEN to validate the k 0I AEA software was to analyse several reference materials. The overall results pointed out that the k 0I AEA software is working properly. (author)

WGCNA: an R package for weighted correlation network analysis.

Science.gov (United States)

Langfelder, Peter; Horvath, Steve

2008-12-29

Correlation networks are increasingly being used in bioinformatics applications. For example, weighted gene co-expression network analysis is a systems biology method for describing the correlation patterns among genes across microarray samples. Weighted correlation network analysis (WGCNA) can be used for finding clusters (modules) of highly correlated genes, for summarizing such clusters using the module eigengene or an intramodular hub gene, for relating modules to one another and to external sample traits (using eigengene network methodology), and for calculating module membership measures. Correlation networks facilitate network based gene screening methods that can be used to identify candidate biomarkers or therapeutic targets. These methods have been successfully applied in various biological contexts, e.g. cancer, mouse genetics, yeast genetics, and analysis of brain imaging data. While parts of the correlation network methodology have been described in separate publications, there is a need to provide a user-friendly, comprehensive, and consistent software implementation and an accompanying tutorial. The WGCNA R software package is a comprehensive collection of R functions for performing various aspects of weighted correlation network analysis. The package includes functions for network construction, module detection, gene selection, calculations of topological properties, data simulation, visualization, and interfacing with external software. Along with the R package we also present R software tutorials. While the methods development was motivated by gene expression data, the underlying data mining approach can be applied to a variety of different settings. The WGCNA package provides R functions for weighted correlation network analysis, e.g. co-expression network analysis of gene expression data. The R package along with its source code and additional material are freely available at http://www.genetics.ucla.edu/labs/horvath/CoexpressionNetwork/Rpackages/WGCNA.

MulRF: a software package for phylogenetic analysis using multi-copy gene trees.

Science.gov (United States)

Chaudhary, Ruchi; Fernández-Baca, David; Burleigh, John Gordon

2015-02-01

MulRF is a platform-independent software package for phylogenetic analysis using multi-copy gene trees. It seeks the species tree that minimizes the Robinson-Foulds (RF) distance to the input trees using a generalization of the RF distance to multi-labeled trees. The underlying generic tree distance measure and fast running time make MulRF useful for inferring phylogenies from large collections of gene trees, in which multiple evolutionary processes as well as phylogenetic error may contribute to gene tree discord. MulRF implements several features for customizing the species tree search and assessing the results, and it provides a user-friendly graphical user interface (GUI) with tree visualization. The species tree search is implemented in C++ and the GUI in Java Swing. MulRF's executable as well as sample datasets and manual are available at http://genome.cs.iastate.edu/CBL/MulRF/, and the source code is available at https://github.com/ruchiherself/MulRFRepo. ruchic@ufl.edu Supplementary data are available at Bioinformatics online. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

The BaBar Software Architecture and Infrastructure

International Nuclear Information System (INIS)

Cosmo, Gabriele

2003-01-01

The BaBar experiment has in place since 1995 a software release system (SRT Software Release Tools) based on CVS (Concurrent Version System) which is in common for all the software developed for the experiment, online or offline, simulation or reconstruction. A software release is a snapshot of all BaBar code (online, offline, utilities, scripts, makefiles, etc.). This set of code is tested to work together, and is indexed by a release number (e.g., 6.8.2) so a user can refer to a particular release and get reproducible results. A release will involve particular versions of packages. A package generally consists of a set of code for a particular task, together with a GNU makefile, scripts and documentation. All BaBar software is maintained in AFS (Andrew File System) directories, so the code is accessible worldwide within the Collaboration. The combination SRT, CVS, AFS, has demonstrated to be a valid, powerful and efficient way of organizing the software infrastructure of a modern HEP experiment with collaborating Institutes distributed worldwide, both in a development and production phase

A study on the radiometric method for evaluating element migration from plastic packagings to its contents

International Nuclear Information System (INIS)

Soares, Eufemia Paez

2008-01-01

Over the past few years, problems related to food contamination by substances or elements that can be a risk to human health have became a concern, not only to government authorities, but to the general population as well. Within this context, plastic packaging can constitute a source of food contamination since plastic manufacturing processes involve the use of catalysts and different types of additives that may contain toxic elements. When food comes into contact with this packaging, components of the package may migrate to the food. In order to control the material used as food packaging, the National Health Surveillance Agency (ANVISA) in Brazil, has established boundary values of migrant substances and procedures to determine migration from plastic packagings to food. In this study the radiometric method was evaluated for element migration determination from plastic packaging to food simulating or to the food itself. This radiometric method consisted in irradiating plastic packaging samples with a thermal neutron flux from the IEA-R1 nuclear research reactor in order to produce radionuclides of elements present in the packagings. The irradiated plastic was then exposed to food simulant or food for element migration. Gamma ray spectrometry was used to measure radioactivity in the simulant or food in order to quantify the migration. The food simulating types and experimental conditions were established according to the ANVISA regulations. Element migration was studied for plastic packaging used for soft drinks, drinking water, milk, dairy products, juices and fatty foods. In the instrumental neutron activation analysis of these packagings the presence of As, Cd, Cr, Co and Sb II was verified. Results obtained from the migration experiments by the radiometric method indicated that Cd, Co, Cr and Sb present in these plastics migrated to the simulant or to the food. In some packagings, the migration of only some of these elements was observed. In these cases the

Large Scale Software Building with CMake in ATLAS

CERN Document Server

Elmsheuser, Johannes; The ATLAS collaboration; Obreshkov, Emil; Undrus, Alexander

2016-01-01

The offline software of the ATLAS experiment at the LHC (Large Hadron Collider) serves as the platform for detector data reconstruction, simulation and analysis. It is also used in the detector trigger system to select LHC collision events during data taking. ATLAS offline software consists of several million lines of C++ and Python code organized in a modular design of more than 2000 specialized packages. Because of different workflows many stable numbered releases are in parallel production use. To accommodate specific workflow requests, software patches with modified libraries are distributed on top of existing software releases on a daily basis. The different ATLAS software applications require a flexible build system that strongly supports unit and integration tests. Within the last year this build system was migrated to CMake. A CMake configuration has been developed that allows one to easily set up and build the mentioned software packages. This also makes it possible to develop and test new and modifi...

Dedicated software for diffractive optics design and simulation

International Nuclear Information System (INIS)

Firsov, A; Brzhezinskaya, M; Erko, A; Firsov, A; Svintsov, A

2013-01-01

An efficient software package for the structure design and simulation of imaging properties of diffraction optical elements has been developed. It operates with point source and consists of: the ZON software, to calculate the structure of an optical element in transmission and reflection; the KRGF software, to simulate the diffraction properties of an ideal optical element with point source; the DS software, to calculate the diffraction properties by taking into consideration material and shadowing effects. Optional software allows simulation with a real non-point source. Zone plate thickness profile, source shape as well as substrate curvature are considered in this calculation. This is especially important for the diffractive focusing elements and gratings at a total external reflection, given that the lateral size of the structure can be up to 1 m. The program package can be used in combination with the Nanomaker software to prepare data for ion and e-beam surface modifications and corrections.

Large scale software building with CMake in ATLAS

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00218447; The ATLAS collaboration; Elmsheuser, Johannes; Obreshkov, Emil; Undrus, Alexander

2017-01-01

The offline software of the ATLAS experiment at the LHC (Large Hadron Collider) serves as the platform for detector data reconstruction, simulation and analysis. It is also used in the detector trigger system to select LHC collision events during data taking. ATLAS offline software consists of several million lines of C++ and Python code organized in a modular design of more than 2000 specialized packages. Because of different workflows many stable numbered releases are in parallel production use. To accommodate specific workflow requests, software patches with modified libraries are distributed on top of existing software releases on a daily basis. The different ATLAS software applications require a flexible build system that strongly supports unit and integration tests. Within the last year this build system was migrated to CMake. A CMake configuration has been developed that allows one to easily set up and build the mentioned software packages. This also makes it possible to develop and test new and modifi...

Calculation of chemical equilibrium between aqueous solution and minerals: the EQ3/6 software package

International Nuclear Information System (INIS)

Wolery, T.J.

1979-01-01

The newly developed EQ/36 software package computes equilibrium models of aqueous geochemical systems. The package contains two principal programs: EQ3 performs distribution-of-species calculations for natural water compositions; EQ6 uses the results of EQ3 to predict the consequences of heating and cooling aqueous solutions and of irreversible reaction in rock--water systems. The programs are valuable for studying such phenomena as the formation of ore bodies, scaling and plugging in geothermal development, and the long-term disposal of nuclear waste. EQ3 and EQ6 are compared with such well-known geochemical codes as SOLMNEQ, WATEQ, REDEQL, MINEQL, and PATHI. The data base allows calculations in the temperature interval 0 to 350 0 C, at either 1 atm-steam saturation pressures or a constant 500 bars. The activity coefficient approximations for aqueous solutes limit modeling to solutions of ionic strength less than about one molal. The mathematical derivations and numerical techniques used in EQ6 are presented in detail. The program uses the Newton--Raphson method to solve the governing equations of chemical equilibrium for a system of specified elemental composition at fixed temperature and pressure. Convergence is aided by optimizing starting estimates and by under-relaxation techniques. The minerals present in the stable phase assemblage are found by several empirical methods. Reaction path models may be generated by using this approach in conjunction with finite differences. This method is analogous to applying high-order predictor--corrector methods to integrate a corresponding set of ordinary differential equations, but avoids propagation of error (drift). 8 figures, 9 tables

A technical survey on issues of the quantitative evaluation of software reliability

International Nuclear Information System (INIS)

Park, J. K; Sung, T. Y.; Eom, H. S.; Jeong, H. S.; Park, J. H.; Kang, H. G.; Lee, K. Y.; Park, J. K.

2000-04-01

To develop the methodology for evaluating the software reliability included in digital instrumentation and control system (I and C), many kinds of methodologies/techniques that have been proposed from the software reliability engineering fuel are analyzed to identify the strong and week points of them. According to analysis results, methodologies/techniques that can be directly applied for the evaluation of the software reliability are not exist. Thus additional researches to combine the most appropriate methodologies/techniques from existing ones would be needed to evaluate the software reliability. (author)

SIMODIS - a software package for simulating nuclear reactor components