Design Requirements, Epistemic Uncertainty and Solution Development Strategies in Software Design

DEFF Research Database (Denmark)

Ball, Linden J.; Onarheim, Balder; Christensen, Bo Thomas

2010-01-01

This paper investigates the potential involvement of “epistemic uncertainty” in mediating between complex design requirements and strategic switches in software design strategies. The analysis revealed that the designers produced an initial “first-pass” solution to the given design brief in a bre...... a view of software design as involving a mixed breadth-first and depth-first solution development approach, with strategic switching to depth-first design being triggered by requirement complexity and being mediated by associated feelings of uncertainty....

The validity of using ROC software for analysing visual grading characteristics data: an investigation based on the novel software VGC analyzer

International Nuclear Information System (INIS)

Hansson, Jonny; Maansson, Lars Gunnar; Baath, Magnus

2016-01-01

The purpose of the present work was to investigate the validity of using single-reader-adapted receiver operating characteristics (ROC) software for analysis of visual grading characteristics (VGC) data. VGC data from four published VGC studies on optimisation of X-ray examinations, previously analysed using ROCFIT, were reanalysed using a recently developed software dedicated to VGC analysis (VGC Analyzer), and the outcomes [the mean and 95 % confidence interval (CI) of the area under the VGC curve (AUC VGC ) and the p-value] were compared. The studies included both paired and non-paired data and were reanalysed both for the fixed-reader and the random-reader situations. The results showed good agreement between the softwares for the mean AUC VGC . For non-paired data, wider CIs were obtained with VGC Analyzer than previously reported, whereas for paired data, the previously reported CIs were similar or even broader. Similar observations were made for the p-values. The results indicate that the use of single-reader-adapted ROC software such as ROCFIT for analysing non-paired VGC data may lead to an increased risk of committing Type I errors, especially in the random-reader situation. On the other hand, the use of ROC software for analysis of paired VGC data may lead to an increased risk of committing Type II errors, especially in the fixed-reader situation. (authors)

Software process in Geant4

International Nuclear Information System (INIS)

Cosmo, G.

2001-01-01

Since its erliest years of R and D, the GEANT4 simulation toolkit has been developed following software process standards which dictated the overall evolution of the project. The complexity of the software involved, the wide areas of application of the software product, the huge amount of code and Category complexity, the size and distributed nature of the Collaboration itself are all ingredients which involve and correlate together a wide variety of software processes. Although in 'production' and available to the public since December 1998, the GEANT4 software product includes Category Domains which are still under active development. Therefore they require different treatment also in terms of improvement of the development cycle, system testing and user support. The author is meant to describe some of the software processes as they are applied in GEANT4 for both development, testing and maintenance of the software

FUZZY LOGIC BASED SOFTWARE PROCESS IMPROVIZATION FRAMEWORK FOR INDIAN SMALL SCALE SOFTWARE ORGANIZATIONS

OpenAIRE

A.M.Kalpana; Dr.A.Ebenezer Jeyakumar

2010-01-01

In this paper, the authors elaborate the results obtained after analyzing and assessing the software process activities in five small to medium sized Indian software companies. This work demonstrates a cost effective framework for software process appraisal, specificallytargeted at Indian software Small-to-Medium-sized Enterprises (SMEs). Improvisation deals with the unforeseen. It involves continual experimentation with new possibilities to create innovative and improved solutions outside cu...

Agile Scientists? : Investigating Agile Practices in Scientific Software Development

OpenAIRE

Sletholt, Magnus Thorstein

2011-01-01

The topic of this master thesis is development of scientific software. The research questions put forth are oriented towards specific agile practices and whether these are present in the development processes of scientific software projects. Moreover, the effects of applying such agile practices, particularly pertaining to the handling of requirements and testing, in scientific software projects are addressed in the thesis. In order to answer the proposed research questions a table consisting...

Software attribute visualization for high integrity software

Energy Technology Data Exchange (ETDEWEB)

Pollock, G.M.

1998-03-01

This report documents a prototype tool developed to investigate the use of visualization and virtual reality technologies for improving software surety confidence. The tool is utilized within the execution phase of the software life cycle. It provides a capability to monitor an executing program against prespecified requirements constraints provided in a program written in the requirements specification language SAGE. The resulting Software Attribute Visual Analysis Tool (SAVAnT) also provides a technique to assess the completeness of a software specification.

ANALISIS JARINGAN UMTS PADA MENARA ROOFTOP DENGAN MENGGUNAKAN SOFTWARE TEMS INVESTIGATION DAN G-NETTRACK PRO

Directory of Open Access Journals (Sweden)

Pande Putu Wahyu Pramanda

2016-03-01

Full Text Available Berkembangnya dunia teknologi telekomunikasi dan informasi sejalan dengan kebutuhan akan kecepatan dan kestabilan akses internet teknologi UMTS. Metode drive test adalah metode yang biasanya digunakan untuk pengukuran kualitas sebuah site. Pihak provider umumnya menggunakan software TEMS Investigation dalam melakukan drive test. Melakukan drive test dengan TEMS Investigation sangatlah tidak praktis dan memerlukan biaya yang besar. Berkembangnya teknologi smartphone membuat drive test dapat dilakukan dengan menggunakan handphone yaitu dengan G-NetTrack Pro. Namun G-NetTrack Pro tidak memiliki kemampuan yang sama dengan TEMS Investigation. Software G-NetTrack Pro dapat digunakan sebagai bahan pembelajaran yaitu untuk pengenalan drivetest namun belum cocok digunakan secara profesional. G-NetTrack Pro dapat menampilkan data yang dibutuhkan dalam drive test namun tidak sedetail TEMS Investigation, sehingga dalam proses pembelajaran dapat digunakan untuk pengenalan karena efisien dan dapat di install pada handphone mahasiswa namun tidak dapat digunakan melakukan drive test misalnya dalam dunia kerja atau secara professional.

Calculation Software versus Illustration Software for Teaching Statistics

DEFF Research Database (Denmark)

Mortensen, Peter Stendahl; Boyle, Robin G.

1999-01-01

As personal computers have become more and more powerful, so have the software packages available to us for teaching statistics. This paper investigates what software packages are currently being used by progressive statistics instructors at university level, examines some of the deficiencies...... of such software, and indicates features that statistics instructors wish to have incorporated in software in the future. The basis of the paper is a survey of participants at ICOTS-5 (the Fifth International Conference on Teaching Statistics). These survey results, combined with the software based papers...

MR urography in children. Pt. 2. How to use ImageJ MR urography processing software

Energy Technology Data Exchange (ETDEWEB)

Vivier, Pierre-Hugues; Dacher, Jean-Nicolas [University Hospital of Rouen, Department of Radiology, Rouen (France); University of Rouen, LITIS Laboratory EA 4108, School of Medicine and Pharmacy, Rouen (France); Dolores, Michael [University Hospital of Rouen, Department of Radiology, Rouen (France); Taylor, Melissa [Department of Paediatrics, Ambroise Pare Hospital, Boulogne Billancourt (France)

2010-05-15

MR urography (MRU) is an emerging technique particularly useful in paediatric uroradiology. The most common indication is the investigation of hydronephrosis. Combined static and dynamic contrast-enhanced MRU (DCE-MRU) provides both morphological and functional information in a single examination. However, specific post-processing must be performed and to our knowledge, dedicated software is not available in conventional workstations. Investigators involved in MRU classically use homemade software that is not freely accessible. For these reasons, we have developed a software program that is freely downloadable on the National Institute of Health (NIH) website. We report and describe in this study the features of this software program. (orig.)

Software inspections at Fermilab -- Use and experience

International Nuclear Information System (INIS)

Berman, E.F.

1998-01-01

Because of the critical nature of DA/Online software it is important to commission software which is correct, usable, reliable, and maintainable, i.e., has the highest quality possible. In order to help meet these goals Fermi National Accelerator Laboratory (Fermilab) has begun implementing a formal software inspection process. Formal Inspections are used to reduce the number of defects in software at as early a stage as possible. These Inspections, in use at a wide variety of institutions (e.g., NASA, Motorola), implement a well-defined procedure that can be used to improve the quality of many different types of deliverables. The inspection process, initially designed by Michael Fagan, will be described as it was developed and as it is currently implemented at Fermilab where it has been used to improve the quality of a variety of different experiment DA/Online software. Benefits of applying inspections at many points in the software life-cycle and benefits to the people involved will be investigated. Experience with many different types of Inspections and the lessons learned about the inspection process itself will be detailed. Finally, the future of Inspections at Fermilab will be given

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 14

Science.gov (United States)

1996-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 15

Science.gov (United States)

1997-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 13

Science.gov (United States)

1995-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software engineer's pocket book

CERN Document Server

Tooley, Michael

2013-01-01

Software Engineer's Pocket Book provides a concise discussion on various aspects of software engineering. The book is comprised of six chapters that tackle various areas of concerns in software engineering. Chapter 1 discusses software development, and Chapter 2 covers programming languages. Chapter 3 deals with operating systems. The book also tackles discrete mathematics and numerical computation. Data structures and algorithms are also explained. The text will be of great use to individuals involved in the specification, design, development, implementation, testing, maintenance, and qualit

Investigating the effects of different factors on development of open source enterprise resources planning software packages

Directory of Open Access Journals (Sweden)

Mehdi Ghorbaninia

2014-08-01

Full Text Available This paper investigates the effects of different factors on development of open source enterprise resources planning software packages. The study designs a questionnaire in Likert scale and distributes it among 210 experts in the field of open source software package development. Cronbach alpha has been calculated as 0.93, which is well above the minimum acceptable level. Using Pearson correlation as well as stepwise regression analysis, the study determines three most important factors including fundamental issues, during and after implementation of open source software development. The study also determines a positive and strong relationship between fundamental factors and after implementation factors (r=0.9006, Sig. = 0.000.

Investigating the Nature of Relationship between Software Size and Development Effort

OpenAIRE

Bajwa, Sohaib-Shahid

2008-01-01

Software effort estimation still remains a challenging and debatable research area. Most of the software effort estimation models take software size as the base input. Among the others, Constructive Cost Model (COCOMO II) is a widely known effort estimation model. It uses Source Lines of Code (SLOC) as the software size to estimate effort. However, many problems arise while using SLOC as a size measure due to its late availability in the software life cycle. Therefore, a lot of research has b...

Lean Customer Involvement : A Multiple Case Study on the Effects of Kanban on Customer Involvement

OpenAIRE

Lundheim, Henning

2012-01-01

Customer involvement is an important, but challenging part of software development. Delays and failures can often be attributed to a lack of customer involvement. Different development methodologies provide different strategies for customer involvement, all with their own challenges. Kanban is a new development methodology quickly gaining popularity in the software development community. This thesis aims to answer the question: How does Kanban influence customer involvement? The main prob...

Software Reuse Success Strategy Model: An Empirical Study of Factors Involved in the Success of Software Reuse in Information System Development

Science.gov (United States)

Tran, Kiet T.

2012-01-01

This study examined the relationship between information technology (IT) governance and software reuse success. Software reuse has been mostly an IT problem but rarely a business one. Studies in software reuse are abundant; however, to date, none has a deep appreciation of IT governance. This study demonstrated that IT governance had a positive…

What Counts in Software Process?

DEFF Research Database (Denmark)

Cohn, Marisa

2009-01-01

and conversations in negotiating between prescriptions from a model and the contingencies that arise in an enactment. A qualitative field study at two Agile software development companies was conducted to investigate the role of artifacts in the software development work and the relationship between these artifacts...... and the Software Process. Documentation of software requirements is a major concern among software developers and software researchers. Agile software development denotes a different relationship to documentation, one that warrants investigation. Empirical findings are presented which suggest a new understanding...

Comparative study on software development methodologies

Directory of Open Access Journals (Sweden)

Mihai Liviu DESPA

2014-12-01

Full Text Available This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager handles challenges and risks that are predominantly encountered in business and research areas that involve state of the art technology. Conventional software development stages are defined and briefly described. Development stages are the building blocks of any software development methodology so it is important to properly research this aspect. Current software development methodologies are presented. Development stages are defined for every showcased methodology. For each methodology a graphic representation is illustrated in order to better individualize its structure. Software development methodologies are compared by highlighting strengths and weaknesses from the stakeholder's point of view. Conclusions are formulated and a research direction aimed at formalizing a software development methodology dedicated to innovation orientated IT projects is enunciated.

Error Free Software

Science.gov (United States)

1985-01-01

A mathematical theory for development of "higher order" software to catch computer mistakes resulted from a Johnson Space Center contract for Apollo spacecraft navigation. Two women who were involved in the project formed Higher Order Software, Inc. to develop and market the system of error analysis and correction. They designed software which is logically error-free, which, in one instance, was found to increase productivity by 600%. USE.IT defines its objectives using AXES -- a user can write in English and the system converts to computer languages. It is employed by several large corporations.

Interface-based software testing

Directory of Open Access Journals (Sweden)

Aziz Ahmad Rais

2016-10-01

Full Text Available Software quality is determined by assessing the characteristics that specify how it should work, which are verified through testing. If it were possible to touch, see, or measure software, it would be easier to analyze and prove its quality. Unfortunately, software is an intangible asset, which makes testing complex. This is especially true when software quality is not a question of particular functions that can be tested through a graphical user interface. The primary objective of software architecture is to design quality of software through modeling and visualization. There are many methods and standards that define how to control and manage quality. However, many IT software development projects still fail due to the difficulties involved in measuring, controlling, and managing software quality. Software quality failure factors are numerous. Examples include beginning to test software too late in the development process, or failing properly to understand, or design, the software architecture and the software component structure. The goal of this article is to provide an interface-based software testing technique that better measures software quality, automates software quality testing, encourages early testing, and increases the software’s overall testability

ANALISIS JARINGAN UMTS PADA MENARA ROOFTOP DENGAN MENGGUNAKAN SOFTWARE TEMS INVESTIGATION DAN G-NETTRACK PRO

OpenAIRE

Pande Putu Wahyu Pramanda; Pande Ketut Sudiarta; Ngurah Indra ER.

2016-01-01

Berkembangnya dunia teknologi telekomunikasi dan informasi sejalan dengan kebutuhan akan kecepatan dan kestabilan akses internet teknologi UMTS. Metode drive test adalah metode yang biasanya digunakan untuk pengukuran kualitas sebuah site. Pihak provider umumnya menggunakan software TEMS Investigation dalam melakukan drive test. Melakukan drive test dengan TEMS Investigation sangatlah tidak praktis dan memerlukan biaya yang besar. Berkembangnya teknologi smartphone membuat drive test dapat di...

Petroleum software profiles

International Nuclear Information System (INIS)

Anon.

1996-01-01

A profile of twenty-two software packages designed for petroleum exploration and production was provided. Some focussed on the oil and gas engineering industry, and others on mapping systems containing well history files and well data summaries. Still other programs provided accounting systems designed to address the complexities of the oil and gas industry. The software packages reviewed were developed by some of the best-known groups involved in software development for the oil and gas industry, including among others, Geoquest, the Can Tek Group, Applied Terravision Systems Inc., Neotechnology Consultants Ltd., (12) OGCI Software Inc., Oracle Energy, Production Revenue Information Systems Management, Virtual Computing Services Ltd., and geoLogic Systems Ltd

Comparative study on software development methodologies

OpenAIRE

Mihai Liviu DESPA

2014-01-01

This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager han...

Software: our quest for excellence. Honoring 50 years of software history, progress, and process

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-06-01

The Software Quality Forum was established by the Software Quality Assurance (SQA) Subcommittee, which serves as a technical advisory group on software engineering and quality initiatives and issues for DOE`s quality managers. The forum serves as an opportunity for all those involved in implementing SQA programs to meet and share ideas and concerns. Participation from managers, quality engineers, and software professionals provides an ideal environment for identifying and discussing issues and concerns. The interaction provided by the forum contributes to the realization of a shared goal--high quality software product. Topics include: testing, software measurement, software surety, software reliability, SQA practices, assessments, software process improvement, certification and licensing of software professionals, CASE tools, software project management, inspections, and management`s role in ensuring SQA. The bulk of this document consists of vugraphs. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

Customizing Standard Software as a Business Model in the IT Industry

DEFF Research Database (Denmark)

Kautz, Karlheinz; Rab, Sameen M.; Sinnet, Michael

2011-01-01

This research studies a new business model in the IT industry, the customization of standard software as the sole foundation for a software company’s earnings. Based on a theoretical background which combines the concepts of inter-organizational networks and open innovation we provide an interpre......This research studies a new business model in the IT industry, the customization of standard software as the sole foundation for a software company’s earnings. Based on a theoretical background which combines the concepts of inter-organizational networks and open innovation we provide...... an interpretive case study of a small software company which customizes a standard product. We investigate the company’s interactions with a large global software company which is the producer of the original software product and with other companies which are involved in the software customization process. We...... primarily on complex, formal partnerships, in which also opportunistic behavior occurs and where informal relations are invaluable sources of knowledge. In addition, the original software producer’s view and treatment of these companies has a vital impact on the customizing company’s practice which...

Software war stories case studies in software management

CERN Document Server

Reifer, Donald J

2014-01-01

This book provides readers with practical advice on how to handle the many issues that can arise as a software project unfolds. The book uses twelve case studies to communicate lessons learned addressing such issues as they occur in government, industrial and academic settings. These cases focus on addressing the things that can be done to establish and meet reasonable expectations.  Such corrective actions often involve more than just dealing with project issues.  For example, software practitioners may have to address obstacles placed in their way by procurement, organizational procedures an

Open source software and libraries

OpenAIRE

Randhawa, Sukhwinder

2008-01-01

Open source software is, software that users have the ability to run, copy, distribute, study, change, share and improve for any purpose. Open source library software’s does not need the initial cost of commercial software and enables libraries to have greater control over their working environment. Library professionals should be aware of the advantages of open source software and should involve in their development. They should have basic knowledge about the selection, installation and main...

Insights into software development in Japan

Science.gov (United States)

Duvall, Lorraine M.

1992-01-01

The interdependence of the U.S.-Japanese economies makes it imperative that we in the United States understand how business and technology developments take place in Japan. We can gain insight into these developments in software engineering by studying the context in which Japanese software is developed, the practices that are used, the problems encountered, the setting surrounding these problems, and the resolution of these problems. Context includes the technological and sociological characteristics of the software development environment, the software processes applied, personnel involved in the development process, and the corporate and social culture surrounding the development. Presented in this paper is a summary of results of a study that addresses these issues. Data for this study was collected during a three month visit to Japan where the author interviewed 20 software managers representing nine companies involved in developing software in Japan. These data are compared to similar data from the United States in which 12 managers from five companies were interviewed.

Green Software Engineering Adaption In Requirement Elicitation Process

Directory of Open Access Journals (Sweden)

Umma Khatuna Jannat

2015-08-01

Full Text Available A recent technology investigates the role of concern in the environment software that is green software system. Now it is widely accepted that the green software can fit all process of software development. It is also suitable for the requirement elicitation process. Now a days software companies have used requirements elicitation techniques in an enormous majority. Because this process plays more and more important roles in software development. At the present time most of the requirements elicitation process is improved by using some techniques and tools. So that the intention of this research suggests to adapt green software engineering for the intention of existing elicitation technique and recommend suitable actions for improvement. This research being involved qualitative data. I used few keywords in my searching procedure then searched IEEE ACM Springer Elsevier Google scholar Scopus and Wiley. Find out articles which published in 2010 until 2016. Finding from the literature review Identify 15 traditional requirement elicitations factors and 23 improvement techniques to convert green engineering. Lastly The paper includes a squat review of the literature a description of the grounded theory and some of the identity issues related finding of the necessity for requirements elicitation improvement techniques.

Cognitive issues in autonomous spacecraft-control operations: An investigation of software-mediated decision making in a scaled environment

Science.gov (United States)

Murphy, Elizabeth Drummond

As advances in technology are applied in complex, semi-automated domains, human controllers are distanced from the controlled process. This physical and psychological distance may both facilitate and degrade human performance. To investigate cognitive issues in spacecraft ground-control operations, the present experimental research was undertaken. The primary issue concerned the ability of operations analysts who do not monitor operations to make timely, accurate decisions when autonomous software calls for human help. Another key issue involved the potential effects of spatial-visualization ability (SVA) in environments that present data in graphical formats. Hypotheses were derived largely from previous findings and predictions in the literature. Undergraduate psychology students were assigned at random to a monitoring condition or an on-call condition in a scaled environment. The experimental task required subjects to decide on the veracity of a problem diagnosis delivered by a software process on-board a simulated spacecraft. To support decision-making, tabular and graphical data displays presented information on system status. A level of software confidence in the problem diagnosis was displayed, and subjects reported their own level of confidence in their decisions. Contrary to expectations, the performance of on-call subjects did not differ significantly from that of continuous monitors. Analysis yielded a significant interaction of sex and condition: Females in the on-call condition had the lowest mean accuracy. Results included a preference for bar charts over line graphs and faster performance with tables than with line graphs. A significant correlation was found between subjective confidence and decision accuracy. SVA was found to be predictive of accuracy but not speed; and SVA was found to be a stronger predictor of performance for males than for females. Low-SVA subjects reported that they relied more on software confidence than did medium- or high

Investigating issues and challenges for customer involvement in business services innovation

DEFF Research Database (Denmark)

Nicolajsen, Hanne Westh; Hugger, Ada Scupola

2011-01-01

innovation processes to different degrees. However, actively involving customers in radical services innovation require a relationship between the customer company and the service provider that might be described as a partnership in which ongoing learning takes place to develop new solutions. The findings......Purpose – The paper aims to investigate how customers may contribute to radical innovation in consultancy services and the conditions needed for customers to be involved in such radical service innovations. Design/methodology/approach – The paper uses a qualitative case study approach including...... rich descriptions based primarily on interviews to investigate an extreme example of successful customer involvement in the development of radical service innovations at Ramboll, a leading Scandinavian engineering consultancy. Findings – The study reveals that customers may be involved in radical...

The use of intelligent systems for risk management in software projects

Directory of Open Access Journals (Sweden)

Oksana A. Gushchina

2017-06-01

Full Text Available Introduction: The article identifies the main risks of a software project, examines the use of different types of intelligent systems in the risk management process for software projects, discusses the basic methods used for process estimation and forecasting in the field of software engineering, identifies currently used empty expert systems, software systems for analysis and risk management of software projects. Materials and Methods: The author describes the peculiarities of risk management in the field of software engineering with involvement of intelligent systems. The intelligent techniques allow solving the control task with expert precision without the involvement of human experts. Results: The result of this work: – identification of the key risks of a software project (tax, legal, financial and commercial risks, IT risks, personnel risks, risks related to competitors, suppliers, marketing and demand and market; – investigation of the current, applied to risk management of software system projects, artificial intelligence, particularly expert systems and software tools for evaluation of the process results; – identification of the most popular empty expert systems (Clips, G2 and Leonardo and software products of the analysis of large databases (Orange, Weka, Rattle GUI, Apache Mahout, SCaViS, RapidMiner, Databionic ESOM Tools, ELKI, KNIME, Pandas and UIMA; – consideration of the cluster, correlation, regression, factor and dispersion analysis methods for the estimation and prediction of the processes of software engineering. Discussion and Conclusions: The results show the feasibility of the application of various intelligent systems in the risk management process. The analysis of methods of evaluating risks and the tendency of their application in the modern systems of intellectual analysis can serve as a start point for creating a unified system of risk management for software projects of medium and high complexity with a

Software Engineering Laboratory Series: Proceedings of the Twentieth Annual Software Engineering Workshop

Science.gov (United States)

1995-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

INVESTIGATION THE FITTING ACCURACY OF CAST AND SLM CO-CR DENTAL BRIDGES USING CAD SOFTWARE

Directory of Open Access Journals (Sweden)

Tsanka Dikova

2017-09-01

Full Text Available The aim of the present paper is to investigate the fitting accuracy of Co-Cr dental bridges, manufactured by three technologies, with the newly developed method using CAD software. The four-part dental bridges of Co-Cr alloys were produced by conventional casting of wax models, casting with 3D printed patterns and selective laser melting. The marginal and internal fit of dental bridges was studied out by two methods – silicone replica test and CAD software. As the silicone replica test characterizes with comparatively low accuracy, a new methodology for investigating the fitting accuracy of dental bridges was developed based on the SolidWorks CAD software. The newly developed method allows the study of the marginal and internal adaptation in unlimited directions and high accuracy. Investigation the marginal fit and internal adaptation of Co-Cr four-part dental bridges by the two methods show that the technological process strongly influences the fitting accuracy of dental restorations. The fitting accuracy of the bridges, cast with 3D printed patterns, is the highest, followed by the SLM and conventionally cast bridges. The marginal fit of the three groups of bridges is in the clinically acceptable range. The internal gap values vary in different regions – it is highest on the occlusal surfaces, followed by that in the marginal and axial areas. The higher fitting accuracy of the bridges, manufactured by casting with 3D printed patterns and SLM, compared to the conventionally cast bridges is a good precondition for their successful implementation in the dental offices and laboratories.

An Investigation of Team Effectiveness in Agile Software Development

OpenAIRE

Haraldsen, Lars Martin Riiser

2012-01-01

Abstract Agile teamwork has been widely used and accepted in today's industry of software development. The methods in agile teamwork claim to improve performance and predictability, and has during the past years become the target for an emerging area of research. The majority of the existing studies concerning agile teamwork mainly focus around eXtreme Programming (XP). Abstract This report is one of few that discuss teamwork in software development having the agile methodology Scrum in the...

Investigation of interfacing NPP simulators with PSCAD software

International Nuclear Information System (INIS)

Zahedi, P.

2006-01-01

This paper demonstrates a new method of interfacing a NPP simulator with the PSCAD software so that the interaction between the plant dynamics and the grid dynamics can be studied. Through this method, data extracted from NPP simulator, as an object, will be communicated to a server running PSCAD software. This paper will illustrate the use of Remote Procedure Calls (RPC) as a distributed, client-server based application used to establish a connection between NPP simulator running on UNIX server and PSCAD running on a PC. Using this method, the called procedure need not exist in the same address space as the calling procedure. Communication protocols available in the NPP simulator are used to export data from the simulator. (author)

Software quality: Process or people

Science.gov (United States)

Palmer, Regina; Labaugh, Modenna

1993-01-01

This paper will present data related to software development processes and personnel involvement from the perspective of software quality assurance. We examine eight years of data collected from six projects. Data collected varied by project but usually included defect and fault density with limited use of code metrics, schedule adherence, and budget growth information. The data are a blend of AFSCP 800-14 and suggested productivity measures in Software Metrics: A Practioner's Guide to Improved Product Development. A software quality assurance database tool, SQUID, was used to store and tabulate the data.

Investigation of Organizational Work-Life Imbalance of Thai Software Developers in a Multinational Software Development Firm using Fishbone Diagram for Knowledge Management

OpenAIRE

N. Mantalay; N. Chakpitak; W. Janchai; P. Sureepong

2012-01-01

Work stress causes the organizational work-life imbalance of employees. Because of this imbalance, workers perform with lower effort to finish assignments and thus an organization will experience reduced productivity. In order to investigate the problem of an organizational work-life imbalance, this qualitative case study focuses on an organizational work-life imbalance among Thai software developers in a German-owned company in Chiang Mai, Thailand. In terms of knowledge...

Criteria for software modularization

Science.gov (United States)

Card, David N.; Page, Gerald T.; Mcgarry, Frank E.

1985-01-01

A central issue in programming practice involves determining the appropriate size and information content of a software module. This study attempted to determine the effectiveness of two widely used criteria for software modularization, strength and size, in reducing fault rate and development cost. Data from 453 FORTRAN modules developed by professional programmers were analyzed. The results indicated that module strength is a good criterion with respect to fault rate, whereas arbitrary module size limitations inhibit programmer productivity. This analysis is a first step toward defining empirically based standards for software modularization.

Software Engineering Laboratory Series: Proceedings of the Twenty-First Annual Software Engineering Workshop

Science.gov (United States)

1996-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Proceedings of the Twenty-Second Annual Software Engineering Workshop

Science.gov (United States)

1997-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Investigation of Classification and Design Requirements for Digital Software for Advanced Research Reactors

Energy Technology Data Exchange (ETDEWEB)

Park, Gee Young; Jung, H. S.; Ryu, J. S.; Park, C

2005-06-15

As the digital technology is being developed drastically, it is being applied to various industrial instrumentation and control (I and C) fields. In the nuclear power plants, I and C systems are also being installed by digital systems replacing their corresponding analog systems installed previously. There had been I and C systems constructed by analog technology especially for the reactor protection system in the research reactor HANARO. Parallel to the pace of the current trend for digital technology, it is desirable that all I and C systems including the safety critical and non-safety systems in an advanced research reactor is to be installed based on the computer based system. There are many attractable features in using digital systems against existing analog systems in that the digital system has a superior performance for a function and it is more flexible than the analog system. And any fruit gained from the newly developed digital technology can be easily incorporated into the existing digital system and hence, the performance improvement of a computer based system can be implemented conveniently and promptly. Moreover, the capability of high integrity in electronic circuits reduces the electronic components needed to construct the processing device and makes the electronic board simple, and this fact reveals that the hardware failure itself are unlikely to occur in the electronic device other than some electric problems. Balanced the fact mentioned above are the roles and related issues of the software loaded on the digital integrated hardware. Some defects in the course of software development might induce a severe damage on the computer system and plant systems and therefore it is obvious that comprehensive and deep considerations are to be placed on the development of the software in the design of I and C system for use in an advanced research reactor. The work investigates the domestic and international standards on the classifications of digital

Usability Evaluation Method for Agile Software Development

Directory of Open Access Journals (Sweden)

Saad Masood Butt

2015-02-01

Full Text Available Agile methods are the best fit for tremendously growing software industry due to its flexible and dynamic nature. But the software developed using agile methods do meet the usability standards? To answer this question we can see that majority of agile software development projects currently involve interactive user interface designs, which can only be possible by following User Centered Design (UCD in agile methods. The question here is, how to integrate UCD with agile models. Both Agile models and UCD are iterative in nature but agile models focus on coding and development of software; whereas, UCD focuses on user interface of the software. Similarly, both of them have testing features where the agile model involves automated tested code while UCD involves an expert or a user to test the user interface. In this paper, a new agile usability model is proposed and the evaluation is of the proposed model is presented by practically implementing it in three real life projects. . Key results from these projects clearly show: the proposed agile model incorporates usability evaluation methods, improves the relationship between usability experts to work with agile software experts; in addition, allows agile developers to incorporate the result from UCD into subsequent interactions.

Learning Human Aspects of Collaborative Software Development

Science.gov (United States)

Hadar, Irit; Sherman, Sofia; Hazzan, Orit

2008-01-01

Collaboration has become increasingly widespread in the software industry as systems have become larger and more complex, adding human complexity to the technological complexity already involved in developing software systems. To deal with this complexity, human-centric software development methods, such as Extreme Programming and other agile…

Software Geometry in Simulations

Science.gov (United States)

Alion, Tyler; Viren, Brett; Junk, Tom

2015-04-01

The Long Baseline Neutrino Experiment (LBNE) involves many detectors. The experiment's near detector (ND) facility, may ultimately involve several detectors. The far detector (FD) will be significantly larger than any other Liquid Argon (LAr) detector yet constructed; many prototype detectors are being constructed and studied to motivate a plethora of proposed FD designs. Whether it be a constructed prototype or a proposed ND/FD design, every design must be simulated and analyzed. This presents a considerable challenge to LBNE software experts; each detector geometry must be described to the simulation software in an efficient way which allows for multiple authors to easily collaborate. Furthermore, different geometry versions must be tracked throughout their use. We present a framework called General Geometry Description (GGD), written and developed by LBNE software collaborators for managing software to generate geometries. Though GGD is flexible enough to be used by any experiment working with detectors, we present it's first use in generating Geometry Description Markup Language (GDML) files to interface with LArSoft, a framework of detector simulations, event reconstruction, and data analyses written for all LAr technology users at Fermilab. Brett is the other of the framework discussed here, the General Geometry Description (GGD).

Software Authentication

International Nuclear Information System (INIS)

Wolford, J.K.; Geelhood, B.D.; Hamilton, V.A.; Ingraham, J.; MacArthur, D.W.; Mitchell, D.J.; Mullens, J.A.; Vanier, P. E.; White, G.K.; Whiteson, R.

2001-01-01

The effort to define guidance for authentication of software for arms control and nuclear material transparency measurements draws on a variety of disciplines and has involved synthesizing established criteria and practices with newer methods. Challenges include the need to protect classified information that the software manipulates as well as deal with the rapid pace of innovation in the technology of nuclear material monitoring. The resulting guidance will shape the design of future systems and inform the process of authentication of instruments now being developed. This paper explores the technical issues underlying the guidance and presents its major tenets

Investigation of land subsidence due to groundwater withdraw in Rafsanjan plain using GIS software

International Nuclear Information System (INIS)

Rahnama, M. B; Moafi H

2009-01-01

Nowadays, the purpose of predicting land subsidence is to manage the optimum usage of groundwater, which is considered according to irregular use of groundwater. Digging deep and semi-deep wells and continuous drought, mainly in wasteland and semi-wasteland zone in recent years causes the land subsidence in Rafsanjan plain. The Rafsanjan basin is located in the nearly central part of Iran in the Kerman province, with a general elevation between 1,400-1,500 m above sea level. In this research, first, the deep and semi-deep wells were investigated and groundwater table data were colleted. Second, these informations were analyzed and corrected. These data were used to create great bank of information data, to manage and program the geographic information system (GIS) software. Then by investigation of an existing land subsidence data, which were collected by GPS in August 1998 and April 1999, by the GIS software, the results show that discharging of groundwater is the main factor of the land subsidence in Rafsanjan zone. Therefore, the critical land subsidence zone of the Rafsanjan plain was determined, and precaution and recommendations are presented. (author)

Proceedings of the Ninth Annual Software Engineering Workshop

Science.gov (United States)

1984-01-01

Experiences in measurement, utilization, and evaluation of software methodologies, models, and tools are discussed. NASA's involvement in ever larger and more complex systems, like the space station project, provides a motive for the support of software engineering research and the exchange of ideas in such forums. The topics of current SEL research are software error studies, experiments with software development, and software tools.

Infusing Reliability Techniques into Software Safety Analysis

Science.gov (United States)

Shi, Ying

2015-01-01

Software safety analysis for a large software intensive system is always a challenge. Software safety practitioners need to ensure that software related hazards are completely identified, controlled, and tracked. This paper discusses in detail how to incorporate the traditional reliability techniques into the entire software safety analysis process. In addition, this paper addresses how information can be effectively shared between the various practitioners involved in the software safety analyses. The author has successfully applied the approach to several aerospace applications. Examples are provided to illustrate the key steps of the proposed approach.

Managing Change in Software Process Improvement

DEFF Research Database (Denmark)

Mathiassen, Lars; Ngwenyama, Ojelanki K.; Aaen, Ivan

2005-01-01

When software managers initiate SPI, most are ill prepared for the scale and complexity of the organizational change involved. Although they typically know how to deal with large software projects, few managers have sufficient experience with projects that transform organizations. To succeed with...

Secure Software Configuration Management Processes for nuclear safety software development environment

International Nuclear Information System (INIS)

Chou, I.-Hsin

2011-01-01

Highlights: → The proposed method emphasizes platform-independent security processes. → A hybrid process based on the nuclear SCM and security regulations is proposed. → Detailed descriptions and Process Flow Diagram are useful for software developers. - Abstract: The main difference between nuclear and generic software is that the risk factor is infinitely greater in nuclear software - if there is a malfunction in the safety system, it can result in significant economic loss, physical damage or threat to human life. However, secure software development environment have often been ignored in the nuclear industry. In response to the terrorist attacks on September 11, 2001, the US Nuclear Regulatory Commission (USNRC) revised the Regulatory Guide (RG 1.152-2006) 'Criteria for use of computers in safety systems of nuclear power plants' to provide specific security guidance throughout the software development life cycle. Software Configuration Management (SCM) is an essential discipline in the software development environment. SCM involves identifying configuration items, controlling changes to those items, and maintaining integrity and traceability of them. For securing the nuclear safety software, this paper proposes a Secure SCM Processes (S 2 CMP) which infuses regulatory security requirements into proposed SCM processes. Furthermore, a Process Flow Diagram (PFD) is adopted to describe S 2 CMP, which is intended to enhance the communication between regulators and developers.

Multivariate Statistical Analysis Software Technologies for Astrophysical Research Involving Large Data Bases

Science.gov (United States)

Djorgovski, S. G.

1994-01-01

We developed a package to process and analyze the data from the digital version of the Second Palomar Sky Survey. This system, called SKICAT, incorporates the latest in machine learning and expert systems software technology, in order to classify the detected objects objectively and uniformly, and facilitate handling of the enormous data sets from digital sky surveys and other sources. The system provides a powerful, integrated environment for the manipulation and scientific investigation of catalogs from virtually any source. It serves three principal functions: image catalog construction, catalog management, and catalog analysis. Through use of the GID3* Decision Tree artificial induction software, SKICAT automates the process of classifying objects within CCD and digitized plate images. To exploit these catalogs, the system also provides tools to merge them into a large, complex database which may be easily queried and modified when new data or better methods of calibrating or classifying become available. The most innovative feature of SKICAT is the facility it provides to experiment with and apply the latest in machine learning technology to the tasks of catalog construction and analysis. SKICAT provides a unique environment for implementing these tools for any number of future scientific purposes. Initial scientific verification and performance tests have been made using galaxy counts and measurements of galaxy clustering from small subsets of the survey data, and a search for very high redshift quasars. All of the tests were successful and produced new and interesting scientific results. Attachments to this report give detailed accounts of the technical aspects of the SKICAT system, and of some of the scientific results achieved to date. We also developed a user-friendly package for multivariate statistical analysis of small and moderate-size data sets, called STATPROG. The package was tested extensively on a number of real scientific applications and has

Multivariate statistical analysis software technologies for astrophysical research involving large data bases

Science.gov (United States)

Djorgovski, S. George

1994-01-01

We developed a package to process and analyze the data from the digital version of the Second Palomar Sky Survey. This system, called SKICAT, incorporates the latest in machine learning and expert systems software technology, in order to classify the detected objects objectively and uniformly, and facilitate handling of the enormous data sets from digital sky surveys and other sources. The system provides a powerful, integrated environment for the manipulation and scientific investigation of catalogs from virtually any source. It serves three principal functions: image catalog construction, catalog management, and catalog analysis. Through use of the GID3* Decision Tree artificial induction software, SKICAT automates the process of classifying objects within CCD and digitized plate images. To exploit these catalogs, the system also provides tools to merge them into a large, complete database which may be easily queried and modified when new data or better methods of calibrating or classifying become available. The most innovative feature of SKICAT is the facility it provides to experiment with and apply the latest in machine learning technology to the tasks of catalog construction and analysis. SKICAT provides a unique environment for implementing these tools for any number of future scientific purposes. Initial scientific verification and performance tests have been made using galaxy counts and measurements of galaxy clustering from small subsets of the survey data, and a search for very high redshift quasars. All of the tests were successful, and produced new and interesting scientific results. Attachments to this report give detailed accounts of the technical aspects for multivariate statistical analysis of small and moderate-size data sets, called STATPROG. The package was tested extensively on a number of real scientific applications, and has produced real, published results.

Developing software for safety-critical applications

International Nuclear Information System (INIS)

Chudleigh, M.

1989-01-01

The effective implementation of many safety-critical systems involves microprocessors running software which needs to be of very high integrity. This article describes some of the problems of producing such software and the place of software within the total system. A development strategy is proposed based on three principles: the goal of defect-free development, the use of mathematical formalism, and the use of an independent team for testing. (author)

Science and Software

Science.gov (United States)

Zelt, C. A.

2017-12-01

Earth science attempts to understand how the earth works. This research often depends on software for modeling, processing, inverting or imaging. Freely sharing open-source software is essential to prevent reinventing the wheel and allows software to be improved and applied in ways the original author may never have envisioned. For young scientists, releasing software can increase their name ID when applying for jobs and funding, and create opportunities for collaborations when scientists who collect data want the software's creator to be involved in their project. However, we frequently hear scientists say software is a tool, it's not science. Creating software that implements a new or better way of earth modeling or geophysical processing, inverting or imaging should be viewed as earth science. Creating software for things like data visualization, format conversion, storage, or transmission, or programming to enhance computational performance, may be viewed as computer science. The former, ideally with an application to real data, can be published in earth science journals, the latter possibly in computer science journals. Citations in either case should accurately reflect the impact of the software on the community. Funding agencies need to support more software development and open-source releasing, and the community should give more high-profile awards for developing impactful open-source software. Funding support and community recognition for software development can have far reaching benefits when the software is used in foreseen and unforeseen ways, potentially for years after the original investment in the software development. For funding, an open-source release that is well documented should be required, with example input and output files. Appropriate funding will provide the incentive and time to release user-friendly software, and minimize the need for others to duplicate the effort. All funded software should be available through a single web site

Happy software developers solve problems better: psychological measurements in empirical software engineering.

Science.gov (United States)

Graziotin, Daniel; Wang, Xiaofeng; Abrahamsson, Pekka

2014-01-01

For more than thirty years, it has been claimed that a way to improve software developers' productivity and software quality is to focus on people and to provide incentives to make developers satisfied and happy. This claim has rarely been verified in software engineering research, which faces an additional challenge in comparison to more traditional engineering fields: software development is an intellectual activity and is dominated by often-neglected human factors (called human aspects in software engineering research). Among the many skills required for software development, developers must possess high analytical problem-solving skills and creativity for the software construction process. According to psychology research, affective states-emotions and moods-deeply influence the cognitive processing abilities and performance of workers, including creativity and analytical problem solving. Nonetheless, little research has investigated the correlation between the affective states, creativity, and analytical problem-solving performance of programmers. This article echoes the call to employ psychological measurements in software engineering research. We report a study with 42 participants to investigate the relationship between the affective states, creativity, and analytical problem-solving skills of software developers. The results offer support for the claim that happy developers are indeed better problem solvers in terms of their analytical abilities. The following contributions are made by this study: (1) providing a better understanding of the impact of affective states on the creativity and analytical problem-solving capacities of developers, (2) introducing and validating psychological measurements, theories, and concepts of affective states, creativity, and analytical-problem-solving skills in empirical software engineering, and (3) raising the need for studying the human factors of software engineering by employing a multidisciplinary viewpoint.

Recommendation systems in software engineering

CERN Document Server

Robillard, Martin P; Walker, Robert J; Zimmermann, Thomas

2014-01-01

With the growth of public and private data stores and the emergence of off-the-shelf data-mining technology, recommendation systems have emerged that specifically address the unique challenges of navigating and interpreting software engineering data.This book collects, structures and formalizes knowledge on recommendation systems in software engineering. It adopts a pragmatic approach with an explicit focus on system design, implementation, and evaluation. The book is divided into three parts: "Part I - Techniques" introduces basics for building recommenders in software engineering, including techniques for collecting and processing software engineering data, but also for presenting recommendations to users as part of their workflow.?"Part II - Evaluation" summarizes methods and experimental designs for evaluating recommendations in software engineering.?"Part III - Applications" describes needs, issues and solution concepts involved in entire recommendation systems for specific software engineering tasks, fo...

Teaching Empirical Software Engineering Using Expert Teams

DEFF Research Database (Denmark)

Kuhrmann, Marco

2017-01-01

Empirical software engineering aims at making software engineering claims measurable, i.e., to analyze and understand phenomena in software engineering and to evaluate software engineering approaches and solutions. Due to the involvement of humans and the multitude of fields for which software...... is crucial, software engineering is considered hard to teach. Yet, empirical software engineering increases this difficulty by adding the scientific method as extra dimension. In this paper, we present a Master-level course on empirical software engineering in which different empirical instruments...... an extra specific expertise that they offer as service to other teams, thus, fostering cross-team collaboration. The paper outlines the general course setup, topics addressed, and it provides initial lessons learned....

The ALMA Common Software as a Basis for a Distributed Software Development

Science.gov (United States)

Raffi, Gianni; Chiozzi, Gianluca; Glendenning, Brian

The Atacama Large Millimeter Array (ALMA) is a joint project involving astronomical organizations in Europe, North America and Japan. ALMA will consist of 64 12-m antennas operating in the millimetre and sub-millimetre wavelength range, with baselines of more than 10 km. It will be located at an altitude above 5000 m in the Chilean Atacama desert. The ALMA Computing group is a joint group with staff scattered on 3 continents and is responsible for all the control and data flow software related to ALMA, including tools ranging from support of proposal preparation to archive access of automatically created images. Early in the project it was decided that an ALMA Common Software (ACS) would be developed as a way to provide to all partners involved in the development a common software platform. The original assumption was that some key middleware like communication via CORBA and the use of XML and Java would be part of the project. It was intended from the beginning to develop this software in an incremental way based on releases, so that it would then evolve into an essential embedded part of all ALMA software applications. In this way we would build a basic unity and coherence into a system that will have been developed in a distributed fashion. This paper evaluates our progress after 1.5 year of work, following a few tests and preliminary releases. It analyzes the advantages and difficulties of such an ambitious approach, which creates an interface across all the various control and data flow applications.

The Impact of Software Culture on the Management of Community Data

Science.gov (United States)

Collins, J. A.; Pulsifer, P. L.; Sheffield, E.; Lewis, S.; Oldenburg, J.

2013-12-01

The Exchange for Local Observations and Knowledge of the Arctic (ELOKA), a program hosted at the National Snow and Ice Data Center (NSIDC), supports the collection, curation, and distribution of Local and Traditional Knowledge (LTK) data, as well as some quantitative data products. Investigations involving LTK data often involve community participation, and therefore require flexible and robust user interfaces to support a reliable process of data collection and management. Often, investigators focused on LTK and community-based monitoring choose to use ELOKA's data services based on our ability to provide rapid proof-of-concepts and economical delivery of a usable product. To satisfy these two overarching criteria, ELOKA is experimenting with modifications to its software development culture both in terms of how the software applications are developed as well as the kind of software applications (or components) being developed. Over the past several years, NSIDC has shifted its software development culture from one of assigning individual scientific programmers to support particular principal investigators or projects, to an Agile Software Methodology implementation using Scrum practices. ELOKA has participated in this process by working with other product owners to schedule and prioritize development work which is then implemented by a team of application developers. Scrum, along with practices such as Test Driven Development (TDD) and paired programming, improves the quality of the software product delivered to the user community. To meet the need for rapid prototyping and to maximize product development and support with limited developer input, our software development efforts are now focused on creating a platform of application modules that can be quickly customized to suit the needs of a variety of LTK projects. This approach is in contrast to the strategy of delivering custom applications for individual projects. To date, we have integrated components of

Models for composing software : an analysis of software composition and objects

NARCIS (Netherlands)

Bergmans, Lodewijk

1999-01-01

In this report, we investigate component-based software construction with a focus on composition. In particular we try to analyze the requirements and issues for components and software composition. As a means to understand this research area, we introduce a canonical model for representing

The Software Point of View

CERN Multimedia

Bentvelsen, Stan

Physics was meant to be the topic of the LUND workshop, but it was software that dominated throughout the week. ATLAS' new software proves a tough nut to crack. Many presented physics analyses were repetitions of the Physics TDR, using (or trying to use) the new software. The main purpose was to demonstrate that results were invariant with new software. Hard to prove since the 'new software' is not yet completed. Nevertheless the so far existing sofware is massively experimented with throughout the entire ATLAS community. So what does this "new software" really mean? The answer depends strongly on the person who deals with this question. The scope varies between "migrating from Fortran77 to C++" and "learn Object Oriented approach" to "implementing services and algorithms in Athena" or "feeding detector description in FADS". Clearly the new software primarily involves migrating from the old Fortran code to C++ with its object oriententation paradigm. Occasionaly there was a hint that this migration is not c...

Simulation software support (S3) system a software testing and debugging tool

International Nuclear Information System (INIS)

Burgess, D.C.; Mahjouri, F.S.

1990-01-01

The largest percentage of technical effort in the software development process is accounted for debugging and testing. It is not unusual for a software development organization to spend over 50% of the total project effort on testing. In the extreme, testing of human-rated software (e.g., nuclear reactor monitoring, training simulator) can cost three to five times as much as all other software engineering steps combined. The Simulation Software Support (S 3 ) System, developed by the Link-Miles Simulation Corporation is ideally suited for real-time simulation applications which involve a large database with models programmed in FORTRAN. This paper will focus on testing elements of the S 3 system. In this paper system support software utilities are provided which enable the loading and execution of modules in the development environment. These elements include the Linking/Loader (LLD) for dynamically linking program modules and loading them into memory and the interactive executive (IEXEC) for controlling the execution of the modules. Features of the Interactive Symbolic Debugger (SD) and the Real Time Executive (RTEXEC) to support the unit and integrated testing will be explored

Economics-driven software architecture

CERN Document Server

Mistrik, Ivan; Kazman, Rick; Zhang, Yuanyuan

2014-01-01

Economics-driven Software Architecture presents a guide for engineers and architects who need to understand the economic impact of architecture design decisions: the long term and strategic viability, cost-effectiveness, and sustainability of applications and systems. Economics-driven software development can increase quality, productivity, and profitability, but comprehensive knowledge is needed to understand the architectural challenges involved in dealing with the development of large, architecturally challenging systems in an economic way. This book covers how to apply economic consider

Investigating Students' Attitude and Intention to Use Social Software in Higher Institution of Learning in Malaysia

Science.gov (United States)

Shittu, Ahmed Tajudeen; Basha, Kamal Madarsha; AbdulRahman, Nik Suryani Nik; Ahmad, Tunku Badariah Tunku

2011-01-01

Purpose: Social software usage is growing at an exponential rate among the present generation of students. Yet, there is paucity of empirical study to understand the determinant of its use in the present setting of this study. This study, therefore, seeks to investigate factors that predict students' attitudes and intentions to use this…

An Empirical Investigation of Architectural Prototyping

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak; Hansen, Klaus Marius

2010-01-01

Architectural prototyping is the process of using executable code to investigate stakeholders’ software architecture concerns with respect to a system under development. Previous work has established this as a useful and cost-effective way of exploration and learning of the design space of a system...... and in addressing issues regarding quality attributes, architectural risks, and the problem of knowledge transfer and conformance. However, the actual industrial use of architectural prototyping has not been thoroughly researched so far. In this article, we report from three studies of architectural prototyping...... in practice. First, we report findings from an ethnographic study of practicing software architects. Secondly, we report from a focus group on architectural prototyping involving architects from four companies. And, thirdly, we report from a survey study of 20 practicing software architects and software...

Exploring the Role of Social Software in Global Software Development Projects

DEFF Research Database (Denmark)

Giuffrida, Rosalba; Dittrich, Y.

2011-01-01

We present a PhD project that investigates the use of Social Software (SoSo) in Global Software Development (GSD) teams. Since SoSo in unstructured and informal in its own nature, we explore how informal communication, which is challenging in GSD, is supported by SoSo in distributed teams and how...

How Open Source Has Changed the Software Industry: Perspectives from Open Source Entrepreneurs

Directory of Open Access Journals (Sweden)

Risto Rajala

2012-01-01

Full Text Available The emergence of F/LOSS (free/libre open source software has triggered several changes in the software industry. F/LOSS has been cited as an archetypal form of open innovation; it consists of the convergence and collaboration of like-minded parties. An increasing number of software firms have taken upon this approach to link outsiders into their service development and product design. Also, software firms have been increasingly grounded their business models on user-centric and service-oriented operations. This article describes a study that investigates these changes from the perspective of F/LOSS entrepreneurs. The findings are summarized into four issues that are critical in managing an F/LOSS business: i dealing with organizational changes in the innovation process; ii mastering user involvement; iii successfully using resources; and iv designing revenue models.

How does Software Process Improvement Address Global Software Engineering?

DEFF Research Database (Denmark)

Kuhrmann, Marco; Diebold, Philipp; Münch, Jürgen

2016-01-01

a systematic mapping study on the state-of-the-art in SPI from a general perspective, we observed Global Software Engineering (GSE) becoming a topic of interest in recent years. Therefore, in this paper, we provide a detailed investigation of those papers from the overall systematic mapping study that were......For decades, Software Process Improvement (SPI) programs have been implemented, inter alia, to improve quality and speed of software development. To set up, guide, and carry out SPI projects, and to measure SPI state, impact, and success, a multitude of different SPI approaches and considerable...... experience are available. SPI addresses many aspects ranging from individual developer skills to entire organizations. It comprises for instance the optimization of specific activities in the software lifecycle as well as the creation of organization awareness and project culture. In the course of conducting...

Systematic Software Development

DEFF Research Database (Denmark)

Kuhrmann, Marco; Méndez Fernández, Daniel

2015-01-01

The speed of innovation and the global allocation of resources to accelerate development or to reduce cost put pressure on the software industry. In the global competition, especially so-called high-price countries have to present arguments why the higher development cost is justified and what...... makes these countries an attractive host for software companies. Often, high-quality engineering and excellent quality of products, e.g., machinery and equipment, are mentioned. Yet, the question is: Can such arguments be also found for the software industry? We aim at investigating the degree...... of professionalism and systematization of software development to draw a map of strengths and weaknesses. To this end, we conducted as a first step an exploratory survey in Germany, presented in this paper. In this survey, we focused on the perceived importance of the two general software engineering process areas...

75 FR 34484 - In the Matter of: Certain Portable Electronic Devices and Related Software; Notice of Investigation

Science.gov (United States)

2010-06-17

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-721] In the Matter of: Certain Portable Electronic Devices and Related Software; Notice of Investigation AGENCY: U.S. International Trade Commission. ACTION... filed with the U.S. International Trade Commission on May 12, 2010, under section 337 of the Tariff Act...

Maintenance simulation: Software issues

Energy Technology Data Exchange (ETDEWEB)

Luk, C.H.; Jette, M.A.

1995-07-01

The maintenance of a distributed software system in a production environment involves: (1) maintaining software integrity, (2) maintaining and database integrity, (3) adding new features, and (4) adding new systems. These issues will be discussed in general: what they are and how they are handled. This paper will present our experience with a distributed resource management system that accounts for resources consumed, in real-time, on a network of heterogenous computers. The simulated environments to maintain this system will be presented relate to the four maintenance areas.

Green in software engineering

CERN Document Server

Calero Munoz, Coral

2015-01-01

This is the first book that presents a comprehensive overview of sustainability aspects in software engineering. Its format follows the structure of the SWEBOK and covers the key areas involved in the incorporation of green aspects in software engineering, encompassing topics from requirement elicitation to quality assurance and maintenance, while also considering professional practices and economic aspects. The book consists of thirteen chapters, which are structured in five parts. First the "Introduction" gives an overview of the primary general concepts related to Green IT, discussing wha

Anonymity and Software Agents: An Interdiscplinary Challenge

NARCIS (Netherlands)

Brazier, F.M.; Oskamp, A.; Prins, J.M.; Schellekens, M.H.M.; Wijngaards, N.J.E.

2004-01-01

Software agents that play a role in E-commerce and E-government applications involving the Internet often contain information about the identity of their human user such as credit cards and bank accounts. This paper discusses whether this is necessary: whether human users and software agents are

Anonymity and Software Agents: An Interdisciplinary Challenge

NARCIS (Netherlands)

Oskamp, A.; Brazier, F.M.; Prins, J.E.J.; Schellekens, M.H.M.; Wijngaards, N.J.E.

2004-01-01

Software agents that play a role in E-commerce and E-government applications involving the Internet often contain information about the identity of their human user such as credit cards and bank accounts. This paper discusses whether this is necessary: whether human users and software agents are

Investigation of the current requirements engineering practices among software developers at the Universiti Utara Malaysia Information Technology (UUMIT) centre

Science.gov (United States)

Hussain, Azham; Mkpojiogu, Emmanuel O. C.; Abdullah, Inam

2016-08-01

Requirements Engineering (RE) is a systemic and integrated process of eliciting, elaborating, negotiating, validating and managing of the requirements of a system in a software development project. UUM has been supported by various systems developed and maintained by the UUM Information Technology (UUMIT) Centre. The aim of this study was to assess the current requirements engineering practices at UUMIT. The main problem that prompted this research is the lack of studies that support software development activities at the UUMIT. The study is geared at helping UUMIT produce quality but time and cost saving software products by implementing cutting edge and state of the art requirements engineering practices. Also, the study contributes to UUM by identifying the activities needed for software development so that the management will be able to allocate budget to provide adequate and precise training for the software developers. Three variables were investigated: Requirement Description, Requirements Development (comprising: Requirements Elicitation, Requirements Analysis and Negotiation, Requirements Validation), and Requirement Management. The results from the study showed that the current practice of requirement engineering in UUMIT is encouraging, but still need further development and improvement because a few RE practices were seldom practiced.

How the NWC handles software as product

Energy Technology Data Exchange (ETDEWEB)

Vinson, D.

1997-11-01

This tutorial provides a hands-on view of how the Nuclear Weapons Complex project should be handling (or planning to handle) software as a product in response to Engineering Procedure 401099. The SQAS has published the document SQAS96-002, Guidelines for NWC Processes for Handling Software Product, that will be the basis for the tutorial. The primary scope of the tutorial is on software products that result from weapons and weapons-related projects, although the information presented is applicable to many software projects. Processes that involve the exchange, review, or evaluation of software product between or among NWC sites, DOE, and external customers will be described.

Applying Quality Costs in a Software Development Environment

Directory of Open Access Journals (Sweden)

I.P. Hollingsworth

1999-05-01

Full Text Available This paper shows how Quality Costs can be a measure of software quality. The relationship between Quality Costs and other software quality metrics is briefly explained, and software development oriented versions of the two principal Quality Cost models are described. Finally the paper discusses the major issues involved in setting up a software Quality Cost programme. The concepts are based on previous research on Quality Costs in manufacturing, coupled with work on software metrics and the work currently being undertaken by the authors in a number of industries.

Module Testing Techniques for Nuclear Safety Critical Software Using LDRA Testing Tool

International Nuclear Information System (INIS)

Moon, Kwon-Ki; Kim, Do-Yeon; Chang, Hoon-Seon; Chang, Young-Woo; Yun, Jae-Hee; Park, Jee-Duck; Kim, Jae-Hack

2006-01-01

The safety critical software in the I and C systems of nuclear power plants requires high functional integrity and reliability. To achieve those requirement goals, the safety critical software should be verified and tested according to related codes and standards through verification and validation (V and V) activities. The safety critical software testing is performed at various stages during the development of the software, and is generally classified as three major activities: module testing, system integration testing, and system validation testing. Module testing involves the evaluation of module level functions of hardware and software. System integration testing investigates the characteristics of a collection of modules and aims at establishing their correct interactions. System validation testing demonstrates that the complete system satisfies its functional requirements. In order to generate reliable software and reduce high maintenance cost, it is important that software testing is carried out at module level. Module testing for the nuclear safety critical software has rarely been performed by formal and proven testing tools because of its various constraints. LDRA testing tool is a widely used and proven tool set that provides powerful source code testing and analysis facilities for the V and V of general purpose software and safety critical software. Use of the tool set is indispensable where software is required to be reliable and as error-free as possible, and its use brings in substantial time and cost savings, and efficiency

Consumer involvement in oral nutritional supplements purchasing behavior

Directory of Open Access Journals (Sweden)

Dwi Meilia Fitriyani

2017-06-01

Full Text Available The paper aimed to get insight of consumer involvement in purchasing behavior towards ONS (Oral Nutritional Supplements for children. By implementing an online survey with sample size of 100, the research investigated the factors (motivation and stimulus factor influencing consumer involvement and the causality between consumer involvement with the product knowledge as well as purchasing behavior. The research tool used was a 5-points Likert questionnaire in which respondents were asked to show their agreements about 40 items of 5 constructs. A partial least square - structural equation modeling by Smart-PLS software used to test the model. The results of this research also comes to conclusion that motivation and stimulus factor had significant affects on consumer involvement, consumer involvement had significant influence to product knowledge as well as ONS purchasing behavior, however product knowledge did not have significant affects on purchasing behavior. The results also showed that the product involvement has an important influence on consumers behavior.

Investigation of incidents of terrorism involving commercial aircraft.

Science.gov (United States)

Clark, M A; Wagner, G N; Wright, D G; Ruehle, C J; McDonnell, E W

1989-07-01

Deaths resulting from terrorism involving aircraft have occurred incident to hijackings as well as bombings. Passengers or groups of passengers have been chosen by terrorists as the recipients of violence based on citizenship, religion, and political beliefs. They have usually been segregated from other passengers and subsequently mistreated and/or murdered. Thorough documentation of the injuries of victims is essential to the investigation of such atrocities; a medicolegal autopsy correlated with a scene investigation is of paramount importance. Aircraft bombings can create extremely sensitive political situations and public demands for quick resolution. The autopsy of victims in such circumstances, if properly conducted, can yield invaluable trace evidence leading to the identification of the explosive device. The examination of any surviving victims as well as the aircraft is also critical in reconstructing the event. Deaths occurring as the result of in-flight aircraft bombings can produce injuries by five different mechanisms, viz. blast, shrapnel, decompression, impact with the aircraft, and ground impact.

Improvements for Optics Measurement and Corrections software

CERN Document Server

Bach, T

2013-01-01

This note presents the improvements for the OMC software during a 14 month technical student internship at CERN. The goal of the work was to improve existing software in terms of maintainability, features and performance. Significant improvements in stability, speed and overall development process were reached. The main software, a Java GUI at the LHC CCC, run for months without noteworthy problems. The overall running time of the software chain used for optics corrections was reduced from nearly half an hour to around two minutes. This was the result of analysing and improving several involved programs and algorithms.

Software Reviews.

Science.gov (United States)

Dwyer, Donna; And Others

1989-01-01

Reviewed are seven software packages for Apple and IBM computers. Included are: "Toxicology"; "Science Corner: Space Probe"; "Alcohol and Pregnancy"; "Science Tool Kit Plus"; Computer Investigations: Plant Growth"; "Climatrolls"; and "Animal Watch: Whales." (CW)

Computational Homology for Software Validation

Science.gov (United States)

2015-03-01

involving compound data-types. 15. SUBJECT TERMS Abstract datatypes , convergence structure, topological methods, specification logics, hybrid software...composite datatype values are networks strewn through the device’s memory; think of a variable whose type is an array of balanced trees. Some means...structural in nature, is required to rigorously specify the evolution of composite states involving non-numerical, non-metric components. Composite datatypes

Current practice in software development for computational neuroscience and how to improve it.

Science.gov (United States)

Gewaltig, Marc-Oliver; Cannon, Robert

2014-01-01

Almost all research work in computational neuroscience involves software. As researchers try to understand ever more complex systems, there is a continual need for software with new capabilities. Because of the wide range of questions being investigated, new software is often developed rapidly by individuals or small groups. In these cases, it can be hard to demonstrate that the software gives the right results. Software developers are often open about the code they produce and willing to share it, but there is little appreciation among potential users of the great diversity of software development practices and end results, and how this affects the suitability of software tools for use in research projects. To help clarify these issues, we have reviewed a range of software tools and asked how the culture and practice of software development affects their validity and trustworthiness. We identified four key questions that can be used to categorize software projects and correlate them with the type of product that results. The first question addresses what is being produced. The other three concern why, how, and by whom the work is done. The answers to these questions show strong correlations with the nature of the software being produced, and its suitability for particular purposes. Based on our findings, we suggest ways in which current software development practice in computational neuroscience can be improved and propose checklists to help developers, reviewers, and scientists to assess the quality of software and whether particular pieces of software are ready for use in research.

Current practice in software development for computational neuroscience and how to improve it.

Directory of Open Access Journals (Sweden)

Marc-Oliver Gewaltig

2014-01-01

Full Text Available Almost all research work in computational neuroscience involves software. As researchers try to understand ever more complex systems, there is a continual need for software with new capabilities. Because of the wide range of questions being investigated, new software is often developed rapidly by individuals or small groups. In these cases, it can be hard to demonstrate that the software gives the right results. Software developers are often open about the code they produce and willing to share it, but there is little appreciation among potential users of the great diversity of software development practices and end results, and how this affects the suitability of software tools for use in research projects. To help clarify these issues, we have reviewed a range of software tools and asked how the culture and practice of software development affects their validity and trustworthiness. We identified four key questions that can be used to categorize software projects and correlate them with the type of product that results. The first question addresses what is being produced. The other three concern why, how, and by whom the work is done. The answers to these questions show strong correlations with the nature of the software being produced, and its suitability for particular purposes. Based on our findings, we suggest ways in which current software development practice in computational neuroscience can be improved and propose checklists to help developers, reviewers, and scientists to assess the quality of software and whether particular pieces of software are ready for use in research.

Teaching Software Componentization: A Bar Chart Java Bean

Science.gov (United States)

Mitri, Michel

2010-01-01

In the current object-oriented paradigm, software construction increasingly involves creating and utilizing "software components". These components can serve a variety of functions, from common algorithmic processes to database connectivity to graphical interfaces. The advantage of component architectures is that programmers can use pre-existing…

Software fault tolerance in computer operating systems

Science.gov (United States)

Iyer, Ravishankar K.; Lee, Inhwan

1994-01-01

This chapter provides data and analysis of the dependability and fault tolerance for three operating systems: the Tandem/GUARDIAN fault-tolerant system, the VAX/VMS distributed system, and the IBM/MVS system. Based on measurements from these systems, basic software error characteristics are investigated. Fault tolerance in operating systems resulting from the use of process pairs and recovery routines is evaluated. Two levels of models are developed to analyze error and recovery processes inside an operating system and interactions among multiple instances of an operating system running in a distributed environment. The measurements show that the use of process pairs in Tandem systems, which was originally intended for tolerating hardware faults, allows the system to tolerate about 70% of defects in system software that result in processor failures. The loose coupling between processors which results in the backup execution (the processor state and the sequence of events occurring) being different from the original execution is a major reason for the measured software fault tolerance. The IBM/MVS system fault tolerance almost doubles when recovery routines are provided, in comparison to the case in which no recovery routines are available. However, even when recovery routines are provided, there is almost a 50% chance of system failure when critical system jobs are involved.

Inequalities in Open Source Software Development: Analysis of Contributor's Commits in Apache Software Foundation Projects.

Science.gov (United States)

Chełkowski, Tadeusz; Gloor, Peter; Jemielniak, Dariusz

2016-01-01

While researchers are becoming increasingly interested in studying OSS phenomenon, there is still a small number of studies analyzing larger samples of projects investigating the structure of activities among OSS developers. The significant amount of information that has been gathered in the publicly available open-source software repositories and mailing-list archives offers an opportunity to analyze projects structures and participant involvement. In this article, using on commits data from 263 Apache projects repositories (nearly all), we show that although OSS development is often described as collaborative, but it in fact predominantly relies on radically solitary input and individual, non-collaborative contributions. We also show, in the first published study of this magnitude, that the engagement of contributors is based on a power-law distribution.

The Utility of Open Source Software in Military Systems

National Research Council Canada - National Science Library

Esperon, Agustin I; Munoz, Jose P; Tanneau, Jean M

2005-01-01

.... The companies involved were THALES and GMV. The MILOS project aimed to demonstrate benefits of Open Source Software in large software based military systems, by casting off constraints inherent to traditional proprietary COTS and by taking...

Probability and statistics with integrated software routines

CERN Document Server

Deep, Ronald

2005-01-01

Probability & Statistics with Integrated Software Routines is a calculus-based treatment of probability concurrent with and integrated with statistics through interactive, tailored software applications designed to enhance the phenomena of probability and statistics. The software programs make the book unique.The book comes with a CD containing the interactive software leading to the Statistical Genie. The student can issue commands repeatedly while making parameter changes to observe the effects. Computer programming is an excellent skill for problem solvers, involving design, prototyping, data gathering, testing, redesign, validating, etc, all wrapped up in the scientific method.See also: CD to accompany Probability and Stats with Integrated Software Routines (0123694698)* Incorporates more than 1,000 engaging problems with answers* Includes more than 300 solved examples* Uses varied problem solving methods

SOFTWARE OPEN SOURCE, SOFTWARE GRATIS?

Directory of Open Access Journals (Sweden)

Nur Aini Rakhmawati

2006-01-01

Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Berlakunya Undang – undang Hak Atas Kekayaan Intelektual (HAKI, memunculkan suatu alternatif baru untuk menggunakan software open source. Penggunaan software open source menyebar seiring dengan isu global pada Information Communication Technology (ICT saat ini. Beberapa organisasi dan perusahaan mulai menjadikan software open source sebagai pertimbangan. Banyak konsep mengenai software open source ini. Mulai dari software yang gratis sampai software tidak berlisensi. Tidak sepenuhnya isu software open source benar, untuk itu perlu dikenalkan konsep software open source mulai dari sejarah, lisensi dan bagaimana cara memilih lisensi, serta pertimbangan dalam memilih software open source yang ada. Kata kunci :Lisensi, Open Source, HAKI

Manifesto for the Software Development Professionalization

Directory of Open Access Journals (Sweden)

Red Latinoamericana en Ingeniería de Software (RedLatinaIS

2013-12-01

Full Text Available One of the central problems of current economic development and industrial competitiveness, social and scientific, is the complexity of large and intensive software systems, and processes for their development and implementation. This complexity is defined by the amount and heterogeneity of the interaction of the hardware with the software components, their inter-relationships, of incorporation of the technical and organizational environments, and the interfaces to humans. The domain of these systems requires actions and scientific thoughts, hierarchical and systematic; also, the success of the products, services and organizations, is increasingly determined by the availability of suitable software products. Therefore, highly qualified professionals, able to understand and master the systems, involved in the entire life cycle of software engineering, and adopt different roles during the development. This is the reason that guide the thinking of this Manifesto , which aims is to achieve the Professionalization of Software Development.

Software Engineering Environment for Component-based Design of Embedded Software

DEFF Research Database (Denmark)

Guo, Yu

2010-01-01

as well as application models in a computer-aided software engineering environment. Furthermore, component models have been realized following carefully developed design patterns, which provide for an efficient and reusable implementation. The components have been ultimately implemented as prefabricated...... executable objects that can be linked together into an executable application. The development of embedded software using the COMDES framework is supported by the associated integrated engineering environment consisting of a number of tools, which support basic functionalities, such as system modelling......, validation, and executable code generation for specific hardware platforms. Developing such an environment and the associated tools is a highly complex engineering task. Therefore, this thesis has investigated key design issues and analysed existing platforms supporting model-driven software development...

Socio-Cultural Challenges in Global Software Engineering Education

Science.gov (United States)

Hoda, Rashina; Babar, Muhammad Ali; Shastri, Yogeshwar; Yaqoob, Humaa

2017-01-01

Global software engineering education (GSEE) is aimed at providing software engineering (SE) students with knowledge, skills, and understanding of working in globally distributed arrangements so they can be prepared for the global SE (GSE) paradigm. It is important to understand the challenges involved in GSEE for improving the quality and…

Achieving strategic surety for high consequence software

Energy Technology Data Exchange (ETDEWEB)

Pollock, G.M.

1996-09-01

A strategic surety roadmap for high consequence software systems under the High Integrity Software (HIS) Program at Sandia National Laboratories guides research in identifying methodologies to improve software surety. Selected research tracks within this roadmap are identified and described detailing current technology and outlining advancements to be pursued over the coming decade to reach HIS goals. The tracks discussed herein focus on Correctness by Design, and System Immunology{trademark}. Specific projects are discussed with greater detail given on projects involving Correct Specification via Visualization, Synthesis, & Analysis; Visualization of Abstract Objects; and Correct Implementation of Components.

Inequalities in Open Source Software Development: Analysis of Contributor’s Commits in Apache Software Foundation Projects

Science.gov (United States)

2016-01-01

While researchers are becoming increasingly interested in studying OSS phenomenon, there is still a small number of studies analyzing larger samples of projects investigating the structure of activities among OSS developers. The significant amount of information that has been gathered in the publicly available open-source software repositories and mailing-list archives offers an opportunity to analyze projects structures and participant involvement. In this article, using on commits data from 263 Apache projects repositories (nearly all), we show that although OSS development is often described as collaborative, but it in fact predominantly relies on radically solitary input and individual, non-collaborative contributions. We also show, in the first published study of this magnitude, that the engagement of contributors is based on a power-law distribution. PMID:27096157

The Investigation of Research-Based Home Parental Involvement Practices, Parental Style, and Student Achievement

Science.gov (United States)

Colson, Myron Jamal

2010-01-01

The purpose of the study was to investigate the relationship of home parental involvement practices, parental style and student achievement. Dimensions of parental involvement practices are parental instruction, parental reinforcement, parental modeling, and parental encouragement. Dimensions of parental style are authoritarian, permissive, and…

Analyzing, Modelling, and Designing Software Ecosystems

DEFF Research Database (Denmark)

Manikas, Konstantinos

as the software development and distribution by a set of actors dependent on each other and the ecosystem. We commence on the hypothesis that the establishment of a software ecosystem on the telemedicine services of Denmark would address these issues and investigate how a software ecosystem can foster...... the development, implementation, and use of telemedicine services. We initially expand the theory of software ecosystems by contributing to the definition and understanding of software ecosystems, providing means of analyzing existing and designing new ecosystems, and defining and measuring the qualities...... of software ecosystems. We use these contributions to design a software ecosystem in the telemedicine services of Denmark with (i) a common platform that supports and promotes development from different actors, (ii) high software interaction, (iii) strong social network of actors, (iv) robust business...

Experiment on safety software evaluation

International Nuclear Information System (INIS)

Soubies, B.; Henry, J.Y.

1994-06-01

The licensing procedures process of nuclear plants includes compulsory steps which bring about a thorough exam of the commands control system. In this context the IPSN uses a tool called MALPAS to carry out an analysis of the quality of the software involved in safety control. The IPSN also try to obtain the automation of the generation of test games necessary for dynamical analysis. The MALPAS tool puts forward the particularities of programing which can influence the testability and the upholding of the studied software. (TEC). 4 refs

PACMAN: PRIMA astrometric instrument software

Science.gov (United States)

Abuter, Roberto; Sahlmann, Johannes; Pozna, Eszter

2010-07-01

The dual feed astrometric instrument software of PRIMA (PACMAN) that is currently being integrated at the VLTI will use two spatially modulated fringe sensor units and a laser metrology system to carry out differential astrometry. Its software and hardware compromises a distributed system involving many real time computers and workstations operating in a synchronized manner. Its architecture has been designed to allow the construction of efficient and flexible calibration and observation procedures. In parallel, a novel scheme of integrating M-code (MATLAB/OCTAVE) with standard VLT (Very Large Telescope) control software applications had to be devised in order to support numerically intensive operations and to have the capacity of adapting to fast varying strategies and algorithms. This paper presents the instrument software, including the current operational sequences for the laboratory calibration and sky calibration. Finally, a detailed description of the algorithms with their implementation, both under M and C code, are shown together with a comparative analysis of their performance and maintainability.

Incorporating Gaming in Software Engineering Projects: Case of RMU Monopoly

Directory of Open Access Journals (Sweden)

Sushil Acharya

2009-02-01

Full Text Available A major challenge in engineering education is retaining student interest in the engineering discipline. Active student involvement in engineering projects is one way of retaining student interest. Such involvement can only be realized if project inception comes entirely from the student. This paper presents a software game, RMU Monopoly, developed as a project requirement for a software engineering course and describes the challenges and gains of implementing such a project. The RMU Monopoly was proposed by three junior software engineering students. The game is a multi-platform software program that allows up to eight players and implements the rules of the Monopoly board game. To ensure agility the game was developed using the spiral software development model. The Software Requirements Specification (SRS document was finalized through an iterative procedure. Standard Unified Modeling Language (UML diagrams were used for product design. A Risk Mitigation, Monitoring, and Management Plan (RMMM was developed to ensure proactive risk management. Gantt chart, weekly progress meetings and weekly scrum meetings were used to track project progress. C# and Sub- Version were used in a client-server architecture to develop the software. The project was successful in retaining student interest in the software engineering discipline

Multi-Level Formation of Complex Software Systems

Directory of Open Access Journals (Sweden)

Hui Li

2016-05-01

Full Text Available We present a multi-level formation model for complex software systems. The previous works extract the software systems to software networks for further studies, but usually investigate the software networks at the class level. In contrast to these works, our treatment of software systems as multi-level networks is more realistic. In particular, the software networks are organized by three levels of granularity, which represents the modularity and hierarchy in the formation process of real-world software systems. More importantly, simulations based on this model have generated more realistic structural properties of software networks, such as power-law, clustering and modularization. On the basis of this model, how the structure of software systems effects software design principles is then explored, and it could be helpful for understanding software evolution and software engineering practices.

Evaluating software for safety systems in nuclear power plants

International Nuclear Information System (INIS)

Lawrence, J.D.; Persons, W.L.; Preckshot, G.G.; Gallagher, J.

1994-01-01

In 1991, LLNL was asked by the NRC to provide technical assistance in various aspects of computer technology that apply to computer-based reactor protection systems. This has involved the review of safety aspects of new reactor designs and the provision of technical advice on the use of computer technology in systems important to reactor safety. The latter includes determining and documenting state-of-the-art subjects that require regulatory involvement by the NRC because of their importance in the development and implementation of digital computer safety systems. These subjects include data communications, formal methods, testing, software hazards analysis, verification and validation, computer security, performance, software complexity and others. One topic software reliability and safety is the subject of this paper

Dependability Analysis Methods For Configurable Software

International Nuclear Information System (INIS)

Dahll, Gustav; Pulkkinen, Urho

1996-01-01

Configurable software systems are systems which are built up by standard software components in the same way as a hardware system is built up by standard hardware components. Such systems are often used in the control of NPPs, also in safety related applications. A reliability analysis of such systems is therefore necessary. This report discusses what configurable software is, and what is particular with respect to reliability assessment of such software. Two very commonly used techniques in traditional reliability analysis, viz. failure mode, effect and criticality analysis (FMECA) and fault tree analysis are investigated. A real example is used to illustrate the discussed methods. Various aspects relevant to the assessment of the software reliability in such systems are discussed. Finally some models for quantitative software reliability assessment applicable on configurable software systems are described. (author)

Modular Software Performance Monitoring

CERN Document Server

Kruse, D F

2011-01-01

CPU clock frequency is not likely to be increased significantly in the coming years, and data analysis speed can be improved by using more processors or buying new machines, only if one is willing to change the paradigm to a parallel one. Therefore, performance monitoring procedures and tools are needed to help programmers to optimize existing software running on current and future hardware. Low level information from hardware performance counters is vital to spot specific performance problems slowing program execution. HEP software is often huge and complex, and existing tools are unable to give results with the required granularity. We will report on the approach we have chose to solve this problem that involves decomposing the application into parts and monitoring each of them separately. Both counting and sampling methods are used to allow an analysis with the required custom granularity: from global level, up to the function level. A set of tools (based on perfmon2 – a software interface to hardware co...

Pre Service Teachers' Usage of Dynamic Mathematics Software

Science.gov (United States)

Bulut, Mehmet; Bulut, Neslihan

2011-01-01

Aim of this study is about mathematics education and dynamic mathematics software. Dynamic mathematics software provides new opportunities for using both computer algebra system and dynamic geometry software. GeoGebra selected as dynamic mathematics software in this research. In this study, it is investigated that what is the usage of pre service…

Research of real-time communication software

Science.gov (United States)

Li, Maotang; Guo, Jingbo; Liu, Yuzhong; Li, Jiahong

2003-11-01

Real-time communication has been playing an increasingly important role in our work, life and ocean monitor. With the rapid progress of computer and communication technique as well as the miniaturization of communication system, it is needed to develop the adaptable and reliable real-time communication software in the ocean monitor system. This paper involves the real-time communication software research based on the point-to-point satellite intercommunication system. The object-oriented design method is adopted, which can transmit and receive video data and audio data as well as engineering data by satellite channel. In the real-time communication software, some software modules are developed, which can realize the point-to-point satellite intercommunication in the ocean monitor system. There are three advantages for the real-time communication software. One is that the real-time communication software increases the reliability of the point-to-point satellite intercommunication system working. Second is that some optional parameters are intercalated, which greatly increases the flexibility of the system working. Third is that some hardware is substituted by the real-time communication software, which not only decrease the expense of the system and promotes the miniaturization of communication system, but also aggrandizes the agility of the system.

Software maintenance and re-validation for nuclear power plants

International Nuclear Information System (INIS)

Phoenix, R.G.

1993-01-01

When designing a new I ampersand C system, software can be developed using modern software engineering methods. However, existing systems cannot, by definition, have been developed using such techniques. Thus, consideration should be given to methods for maintaining aging software. Requirements for software changes can arise from several sources. Several problems can be encountered when becoming involved in maintaining aging software. Solutions to these problems come from the employment of modern software engineering techniques, including complete emulation of the original hardware, reverse/re-engineering and redesign. The choice of which technique(s) to use can depend on cost and whether it is possible to demonstrate the required integrity. Furthermore, the extent of modification, the likelihood of further changes and further maintenance problems can all have a bearing

What makes computational open source software libraries successful?

International Nuclear Information System (INIS)

Bangerth, Wolfgang; Heister, Timo

2013-01-01

Software is the backbone of scientific computing. Yet, while we regularly publish detailed accounts about the results of scientific software, and while there is a general sense of which numerical methods work well, our community is largely unaware of best practices in writing the large-scale, open source scientific software upon which our discipline rests. This is particularly apparent in the commonly held view that writing successful software packages is largely the result of simply ‘being a good programmer’ when in fact there are many other factors involved, for example the social skill of community building. In this paper, we consider what we have found to be the necessary ingredients for successful scientific software projects and, in particular, for software libraries upon which the vast majority of scientific codes are built today. In particular, we discuss the roles of code, documentation, communities, project management and licenses. We also briefly comment on the impact on academic careers of engaging in software projects. (paper)

What makes computational open source software libraries successful?

Science.gov (United States)

Bangerth, Wolfgang; Heister, Timo

2013-01-01

Software is the backbone of scientific computing. Yet, while we regularly publish detailed accounts about the results of scientific software, and while there is a general sense of which numerical methods work well, our community is largely unaware of best practices in writing the large-scale, open source scientific software upon which our discipline rests. This is particularly apparent in the commonly held view that writing successful software packages is largely the result of simply ‘being a good programmer’ when in fact there are many other factors involved, for example the social skill of community building. In this paper, we consider what we have found to be the necessary ingredients for successful scientific software projects and, in particular, for software libraries upon which the vast majority of scientific codes are built today. In particular, we discuss the roles of code, documentation, communities, project management and licenses. We also briefly comment on the impact on academic careers of engaging in software projects.

Psychological support of crime investigation with the involvement of minors in the Investigative Committee of the Russian Federation

Directory of Open Access Journals (Sweden)

Mikhaylova Yu.A.

2017-01-01

Full Text Available The article describes the aims, tasks and fundamental principles of psychological support of crime investigation with the involvement of minors as a one of the aspects of criminalistical support of the preliminary investigation in the Investigative Committee of the Russian Federation are revealed. Discusses the following areas of psychological support of investigation of criminal cases with participation of minors: participation of a psychologist in the investigative actions, the preliminary interviews with the aim of preparing minors for investigation, the business of the investigator in the choice of tactics of investigative actions and other issues, psychological examination of the minor, the receipt of additional information from minors using methods of applied psychology, compiling a subjective portrait of the alleged offender, psychological analysis of testimonies of minors and others. Also this article discusses the basic principles end actual techniques of interview of minor sexual abuses victims are examined including NICHD Protocol developed by the National Institute of Child Health & Human Development, NICHD.

The Walk-Man Robot Software Architecture

OpenAIRE

Mirko Ferrati; Alessandro Settimi; Alessandro Settimi; Luca Muratore; Alberto Cardellino; Alessio Rocchi; Enrico Mingo Hoffman; Corrado Pavan; Dimitrios Kanoulas; Nikos G. Tsagarakis; Lorenzo Natale; Lucia Pallottino

2016-01-01

A software and control architecture for a humanoid robot is a complex and large project, which involves a team of developers/researchers to be coordinated and requires many hard design choices. If such project has to be done in a very limited time, i.e., less than 1 year, more constraints are added and concepts, such as modular design, code reusability, and API definition, need to be used as much as possible. In this work, we describe the software architecture developed for Walk-Man, a robot ...

Softwareland Chronicles: A Software Development Meta-Process Proposal

Directory of Open Access Journals (Sweden)

Bolanos Sandro

2016-05-01

Full Text Available This paper presents the software development meta-process (SD-MP as a proposal to set up software projects. Within this proposal we offer conceptual elements that help solve the war of methodologies and processes in favor of an integrating viewpoint, where the main flaws associated with conventional and agile approaches are removed. Our newly developed software platform to support the meta-process is also presented together with three case studies involving projects currently in progress, where the framework proposed in SD-MP has been applied.

A Multidimensional Software Engineering Course

Science.gov (United States)

Barzilay, O.; Hazzan, O.; Yehudai, A.

2009-01-01

Software engineering (SE) is a multidimensional field that involves activities in various areas and disciplines, such as computer science, project management, and system engineering. Though modern SE curricula include designated courses that address these various subjects, an advanced summary course that synthesizes them is still missing. Such a…

The BaBar Software Architecture and Infrastructure

International Nuclear Information System (INIS)

Cosmo, Gabriele

2003-01-01

The BaBar experiment has in place since 1995 a software release system (SRT Software Release Tools) based on CVS (Concurrent Version System) which is in common for all the software developed for the experiment, online or offline, simulation or reconstruction. A software release is a snapshot of all BaBar code (online, offline, utilities, scripts, makefiles, etc.). This set of code is tested to work together, and is indexed by a release number (e.g., 6.8.2) so a user can refer to a particular release and get reproducible results. A release will involve particular versions of packages. A package generally consists of a set of code for a particular task, together with a GNU makefile, scripts and documentation. All BaBar software is maintained in AFS (Andrew File System) directories, so the code is accessible worldwide within the Collaboration. The combination SRT, CVS, AFS, has demonstrated to be a valid, powerful and efficient way of organizing the software infrastructure of a modern HEP experiment with collaborating Institutes distributed worldwide, both in a development and production phase

KNGR core proection calculator, software, verification and validation plan

International Nuclear Information System (INIS)

Kim, Jang Yeol; Park, Jong Kyun; Lee, Ki Young; Lee, Jang Soo; Cheon, Se Woo

2001-05-01

This document describes the Software Verification and Validation Plan(SVVP) Guidance to be used in reviewing the Software Program Manual(SPM) in Korean Next Generation Reactor(KNGR) projects. This document is intended for a verifier or reviewer who is involved with performing of software verification and validation task activity in KNGR projects. This document includeds the basic philosophy, performing V and V effort, software testing techniques, criteria of review and audit on the safety software V and V activity. Major review topics on safety software addresses three kinds of characteristics based on Standard Review Plan(SRP) Chapter 7, Branch Technical Position(BTP)-14 : management characteristics, implementation characteristics and resources characteristics when reviewing on SVVP. Based on major topics of this document, we have produced the evaluation items list such as checklist in Appendix A

Artificial intelligence and the space station software support environment

Science.gov (United States)

Marlowe, Gilbert

1986-01-01

In a software system the size of the Space Station Software Support Environment (SSE), no one software development or implementation methodology is presently powerful enough to provide safe, reliable, maintainable, cost effective real time or near real time software. In an environment that must survive one of the most harsh and long life times, software must be produced that will perform as predicted, from the first time it is executed to the last. Many of the software challenges that will be faced will require strategies borrowed from Artificial Intelligence (AI). AI is the only development area mentioned as an example of a legitimate reason for a waiver from the overall requirement to use the Ada programming language for software development. The limits are defined of the applicability of the Ada language Ada Programming Support Environment (of which the SSE is a special case), and software engineering to AI solutions by describing a scenario that involves many facets of AI methodologies.

Global Software Engineering: A Software Process Approach

Science.gov (United States)

Richardson, Ita; Casey, Valentine; Burton, John; McCaffery, Fergal

Our research has shown that many companies are struggling with the successful implementation of global software engineering, due to temporal, cultural and geographical distance, which causes a range of factors to come into play. For example, cultural, project managementproject management and communication difficulties continually cause problems for software engineers and project managers. While the implementation of efficient software processes can be used to improve the quality of the software product, published software process models do not cater explicitly for the recent growth in global software engineering. Our thesis is that global software engineering factors should be included in software process models to ensure their continued usefulness in global organisations. Based on extensive global software engineering research, we have developed a software process, Global Teaming, which includes specific practices and sub-practices. The purpose is to ensure that requirements for successful global software engineering are stipulated so that organisations can ensure successful implementation of global software engineering.

A Field Study of Scale Economies in Software Maintenance

OpenAIRE

Rajiv D. Banker; Sandra A. Slaughter

1997-01-01

Software maintenance is a major concern for organizations. Productivity gains in software maintenance can enable redeployment of Information Systems resources to other activities. Thus, it is important to understand how software maintenance productivity can be improved. In this study, we investigate the relationship between project size and software maintenance productivity. We explore scale economies in software maintenance by examining a number of software enhancement projects at a large fi...

Intercomparison of PIXE spectrometry software packages

International Nuclear Information System (INIS)

2003-02-01

During the year 2000, an exercise was organized to make a intercomparison of widely available software packages for analysis of particle induced X ray emission (PIXE) spectra. This TECDOC describes the method used in this intercomparison exercise and presents the results obtained. It also gives a general overview of the participating software packages. This includes basic information on their user interface, graphical presentation capabilities, physical phenomena taken in account, way of presenting results, etc. No recommendation for a particular software package or method for spectrum analysis is given. It is intended that the readers reach their own conclusions and make their own choices, according to their specific needs. This TECDOC will be useful to anyone involved in PIXE spectrum analysis. This TECDOC includes a companion CD with the complete set of test spectra used for intercomparison. The test spectra on this CD can be used to test any PIXE spectral analysis software package

Software Engineering Support of the Third Round of Scientific Grand Challenge Investigations: An Earth Modeling System Software Framework Strawman Design that Integrates Cactus and UCLA/UCB Distributed Data Broker

Science.gov (United States)

Talbot, Bryan; Zhou, Shu-Jia; Higgins, Glenn

2002-01-01

One of the most significant challenges in large-scale climate modeling, as well as in high-performance computing in other scientific fields, is that of effectively integrating many software models from multiple contributors. A software framework facilitates the integration task. both in the development and runtime stages of the simulation. Effective software frameworks reduce the programming burden for the investigators, freeing them to focus more on the science and less on the parallel communication implementation, while maintaining high performance across numerous supercomputer and workstation architectures. This document proposes a strawman framework design for the climate community based on the integration of Cactus, from the relativistic physics community, and UCLA/UCB Distributed Data Broker (DDB) from the climate community. This design is the result of an extensive survey of climate models and frameworks in the climate community as well as frameworks from many other scientific communities. The design addresses fundamental development and runtime needs using Cactus, a framework with interfaces for FORTRAN and C-based languages, and high-performance model communication needs using DDB. This document also specifically explores object-oriented design issues in the context of climate modeling as well as climate modeling issues in terms of object-oriented design.

Factors negatively influencing knowledge sharing in software development

Directory of Open Access Journals (Sweden)

Lucas T. Khoza

2017-07-01

Objective: This study seeks to identify factors that negatively influence knowledge sharing in software development in the developing country context. Method: Expert sampling as a subcategory of purposive sampling was employed to extract information, views and opinions from experts in the field of information and communication technology, more specifically from those who are involved in software development projects. Four Johannesburg-based software developing organisations listed on the Johannesburg Stock Exchange (JSE, South Africa, participated in this research study. Quantitative data were collected using an online questionnaire with closed-ended questions. Results: Findings of this research reveal that job security, motivation, time constraints, physiological factors, communication, resistance to change and rewards are core factors negatively influencing knowledge sharing in software developing organisations. Conclusions: Improved understanding of factors negatively influencing knowledge sharing is expected to assist software developing organisations in closing the gap for software development projects failing to meet the triple constraint of time, cost and scope.

The Role and Quality of Software Safety in the NASA Constellation Program

Science.gov (United States)

Layman, Lucas; Basili, Victor R.; Zelkowitz, Marvin V.

2010-01-01

In this study, we examine software safety risk in the early design phase of the NASA Constellation spaceflight program. Obtaining an accurate, program-wide picture of software safety risk is difficult across multiple, independently-developing systems. We leverage one source of safety information, hazard analysis, to provide NASA quality assurance managers with information regarding the ongoing state of software safety across the program. The goal of this research is two-fold: 1) to quantify the relative importance of software with respect to system safety; and 2) to quantify the level of risk presented by software in the hazard analysis. We examined 154 hazard reports created during the preliminary design phase of three major flight hardware systems within the Constellation program. To quantify the importance of software, we collected metrics based on the number of software-related causes and controls of hazardous conditions. To quantify the level of risk presented by software, we created a metric scheme to measure the specificity of these software causes. We found that from 49-70% of hazardous conditions in the three systems could be caused by software or software was involved in the prevention of the hazardous condition. We also found that 12-17% of the 2013 hazard causes involved software, and that 23-29% of all causes had a software control. Furthermore, 10-12% of all controls were software-based. There is potential for inaccuracy in these counts, however, as software causes are not consistently scoped, and the presence of software in a cause or control is not always clear. The application of our software specificity metrics also identified risks in the hazard reporting process. In particular, we found a number of traceability risks in the hazard reports may impede verification of software and system safety.

EQ3/6 software test and verification report 9/94

International Nuclear Information System (INIS)

Kishi, T.

1996-02-01

This document is the Software Test and Verification Report (STVR) for the EQ3/6 suite of codes as stipulated in the Individual Software Plan for Initial Qualification of EQ3/6 (ISP-NF-07, Revision 1, 11/25/92). The software codes, EQPT, EQ3NR, EQ6, and the software library EQLIB constitute the EQ3/6 software package. This software test and verification project for EQ3/6 was started under the requirements of the LLNL Yucca Mountain Project Software Quality Assurance Plan (SQAP), Revision 0, December 14, 1989, but QP 3.2, Revision 2, June 21, 1994 is now the operative controlling procedure. This is a ''V and V'' report in the language of QP 3.2, Revision 2. Because the author of this report does not have a background in geochemistry, other technical sources were consulted in order to acquire some familiarity with geochemisty, the terminology minology involved, and to review comparable computational methods especially, geochemical aqueous speciation-solubility calculations. The software for the EQ3/6 package consists of approximately 47,000 lines of FORTRAN77 source code and nine on platforms ranging from workstations to supercomputers. The physical control of EQ3/6 software package and documentation is on a SUN SPARC station. Walkthroughs of each principal software packages, EQPT, EQ3NR, and EQ6 were conducted in order to understand the computational procedures involved, to determine any commonality in procedures, and then to establish a plan for the test and verification of EQ3/6. It became evident that all three phases depended upon solving an n x n matrix by the Newton-Raphson Method. Thus, a great deal of emphasis on the test and verification of this procedure was carried out on the first code in the software package EQPT

EQ3/6 software test and verification report 9/94

Energy Technology Data Exchange (ETDEWEB)

Kishi, T.

1996-02-01

This document is the Software Test and Verification Report (STVR) for the EQ3/6 suite of codes as stipulated in the Individual Software Plan for Initial Qualification of EQ3/6 (ISP-NF-07, Revision 1, 11/25/92). The software codes, EQPT, EQ3NR, EQ6, and the software library EQLIB constitute the EQ3/6 software package. This software test and verification project for EQ3/6 was started under the requirements of the LLNL Yucca Mountain Project Software Quality Assurance Plan (SQAP), Revision 0, December 14, 1989, but QP 3.2, Revision 2, June 21, 1994 is now the operative controlling procedure. This is a ``V and V`` report in the language of QP 3.2, Revision 2. Because the author of this report does not have a background in geochemistry, other technical sources were consulted in order to acquire some familiarity with geochemisty, the terminology minology involved, and to review comparable computational methods especially, geochemical aqueous speciation-solubility calculations. The software for the EQ3/6 package consists of approximately 47,000 lines of FORTRAN77 source code and nine on platforms ranging from workstations to supercomputers. The physical control of EQ3/6 software package and documentation is on a SUN SPARC station. Walkthroughs of each principal software packages, EQPT, EQ3NR, and EQ6 were conducted in order to understand the computational procedures involved, to determine any commonality in procedures, and then to establish a plan for the test and verification of EQ3/6. It became evident that all three phases depended upon solving an n x n matrix by the Newton-Raphson Method. Thus, a great deal of emphasis on the test and verification of this procedure was carried out on the first code in the software package EQPT.

Using a Foundational Ontology for Reengineering a Software Enterprise Ontology

Science.gov (United States)

Perini Barcellos, Monalessa; de Almeida Falbo, Ricardo

The knowledge about software organizations is considerably relevant to software engineers. The use of a common vocabulary for representing the useful knowledge about software organizations involved in software projects is important for several reasons, such as to support knowledge reuse and to allow communication and interoperability between tools. Domain ontologies can be used to define a common vocabulary for sharing and reuse of knowledge about some domain. Foundational ontologies can be used for evaluating and re-designing domain ontologies, giving to these real-world semantics. This paper presents an evaluating of a Software Enterprise Ontology that was reengineered using the Unified Foundation Ontology (UFO) as basis.

Modeling of electronic power steering system for IKCO SAMAND vehicle and investigating on its performance via CARSIM software

Science.gov (United States)

Haghgoo, Esmail; Zamani, Mohammad; Sharbati, Ali

2017-02-01

The point of this article is introducing the usage of electronic power steering (ESP) system in IKCO SAMAND vehicle and investigating on it's benefit's. Also the operation of electronic steering system and it's performance in IKCO SAMAND vehicle have been described. The optimization of IC engine efficiency and it's fuel consumption have been simulated via ADVISOR software used in MATLAB software. Usually, mechanical steering systems and hydraulic steering systems are producing inside IRAN that the mechanical types have not accepted because of it's too many disadvantages. The hydraulic steering systems, that have been replaced with mechanical types, indeed have the same features with mechanical types but with a difference which they have a hydraulic booster to facilitate the rotation of steering wheel. Beside advantages in hydraulic systems, they are some disadvantages in this system that one of the most important of them is reducing the output power of engine. To restore this power dissipated, we use ESP systems. In this article output diagrams given by software, are showing that IKCO SAMAND vehicle which equipped with ESP system, exerts less torque and power on steering wheel. This improves the safety of driver and also performance of the vehicle at high speeds and reduces fuel consumption beside increasing the efficiency of IC engine.

USE OF INFORMATION TECHNOLOGY IN RESEARCH WORK OF FUTURE SOFTWARE ENGINEERS

Directory of Open Access Journals (Sweden)

M.O. Vinnik

2014-04-01

Full Text Available The article describes practical cooperation experience of Kherson State University’s lecturers group and students on software creation for automation, selection and processing of information about the universities scientists publication on the Internet. Recently, much attention is paid to scientometric bases by scientific societies of Eastern Europe. Large number of countries creates their own scientometric bases, platforms and other services. Working on familiar projects the future software engineers can be ready to implement similar tasks as for own country and for the world leaders. The result of research group work should be creation of software tools to support the business processes of research activities at the university. The involvement of students in research work allows using their creativity and employment potential for solving urgent problems of university, raising research competence of students’ professional skills in computer science and software engineering, which are involved in design and development of real software product. Participation of students in each stage is essential element of research group work. While creating software, students receive not only theoretical and practical knowledge of research work but also enhance their professional competences, as projects implementation is the closest to the professional software engineer’s work.

Software engineering architecture-driven software development

CERN Document Server

Schmidt, Richard F

2013-01-01

Software Engineering: Architecture-driven Software Development is the first comprehensive guide to the underlying skills embodied in the IEEE's Software Engineering Body of Knowledge (SWEBOK) standard. Standards expert Richard Schmidt explains the traditional software engineering practices recognized for developing projects for government or corporate systems. Software engineering education often lacks standardization, with many institutions focusing on implementation rather than design as it impacts product architecture. Many graduates join the workforce with incomplete skil

A Public Domain Software Library for Reading and Language Arts.

Science.gov (United States)

Balajthy, Ernest

A three-year project carried out by the Microcomputers and Reading Committee of the New Jersey Reading Association involved the collection, improvement, and distribution of free microcomputer software (public domain programs) designed to deal with reading and writing skills. Acknowledging that this free software is not without limitations (poor…

Web accessibility and open source software.

Science.gov (United States)

Obrenović, Zeljko

2009-07-01

A Web browser provides a uniform user interface to different types of information. Making this interface universally accessible and more interactive is a long-term goal still far from being achieved. Universally accessible browsers require novel interaction modalities and additional functionalities, for which existing browsers tend to provide only partial solutions. Although functionality for Web accessibility can be found as open source and free software components, their reuse and integration is complex because they were developed in diverse implementation environments, following standards and conventions incompatible with the Web. To address these problems, we have started several activities that aim at exploiting the potential of open-source software for Web accessibility. The first of these activities is the development of Adaptable Multi-Interface COmmunicator (AMICO):WEB, an infrastructure that facilitates efficient reuse and integration of open source software components into the Web environment. The main contribution of AMICO:WEB is in enabling the syntactic and semantic interoperability between Web extension mechanisms and a variety of integration mechanisms used by open source and free software components. Its design is based on our experiences in solving practical problems where we have used open source components to improve accessibility of rich media Web applications. The second of our activities involves improving education, where we have used our platform to teach students how to build advanced accessibility solutions from diverse open-source software. We are also partially involved in the recently started Eclipse projects called Accessibility Tools Framework (ACTF), the aim of which is development of extensible infrastructure, upon which developers can build a variety of utilities that help to evaluate and enhance the accessibility of applications and content for people with disabilities. In this article we briefly report on these activities.

Entrepreneurial model based technology creative industries sector software through the use of free open source software for Universitas Pendidikan Indonesia students

Science.gov (United States)

Hasan, B.; Hasbullah; Purnama, W.; Hery, A.

2016-04-01

Creative industry development areas of software by using Free Open Source Software (FOSS) is expected to be one of the solutions to foster new entrepreneurs of the students who can open job opportunities and contribute to economic development in Indonesia. This study aims to create entrepreneurial coaching model based on the creative industries by utilizing FOSS software field as well as provide understanding and fostering entrepreneurial creative industries based field software for students of Universitas Pendidikan Indonesia. This activity phase begins with identifying entrepreneurs or business software technology that will be developed, training and mentoring, apprenticeship process at industrial partners, creation of business plans and monitoring and evaluation. This activity involves 30 UPI student which has the motivation to self-employment and have competence in the field of information technology. The results and outcomes expected from these activities is the birth of a number of new entrepreneurs from the students engaged in the software industry both software in the world of commerce (e-commerce) and education/learning (e-learning/LMS) and games.

Epistemic Communities, Situated Learning and Open Source Software Development

DEFF Research Database (Denmark)

Edwards, Kasper

2001-01-01

This paper analyses open source software (OSS) development as an epistemic community where each individual project is perceived as a single epistemic community. OSS development is a learning process where the involved parties contribute to, and learn from the community. It is discovered that theory...... of epistemic communities does indeed contribute to the understanding of open source software development. But, the important learning process of open source software development is not readily explained. The paper then introduces situated learning and legitimate peripheral participation as theoretical...

Theoretical Foundations of Software Technology.

Science.gov (United States)

1983-02-14

major research interests are software testing, aritificial intelligence , pattern recogu- tion, and computer graphics. Dr. Chandranekaran is currently...produce PASCAL language code for the problems. Because of its relationship to many issues in Artificial Intelligence , we also investigated problems of...analysis to concurmt-prmcess software re- are not " intelligent " enough to discover these by themselves, ouirl more complex control flow models. The PAF

Architecture design in global and model-centric software development

NARCIS (Netherlands)

Heijstek, Werner

2012-01-01

This doctoral dissertation describes a series of empirical investigations into representation, dissemination and coordination of software architecture design in the context of global software development. A particular focus is placed on model-centric and model-driven software development.

Supporting the evolution of research in software ecosystems

DEFF Research Database (Denmark)

Manikas, Konstantinos

2016-01-01

with significant lack of software ecosystem specific theories that are solid, mature, generic, and detailed enough to be measurable and transferable. In this study, we intent to come closer to an evolution of the field by supporting the “localization” of research, i.e. the focus on specific types of software...... software ecosystem studies lack deeper investigation of technical and collaborative aspects. Moreover, we identify an increased focus on organizational aspects and a rather limited focus on business. Furthermore, we identify common technology as the component investigated most in the ecosystems, both from...

Software FMEA analysis for safety-related application software

International Nuclear Information System (INIS)

Park, Gee-Yong; Kim, Dong Hoon; Lee, Dong Young

2014-01-01

Highlights: • We develop a modified FMEA analysis suited for applying to software architecture. • A template for failure modes on a specific software language is established. • A detailed-level software FMEA analysis on nuclear safety software is presented. - Abstract: A method of a software safety analysis is described in this paper for safety-related application software. The target software system is a software code installed at an Automatic Test and Interface Processor (ATIP) in a digital reactor protection system (DRPS). For the ATIP software safety analysis, at first, an overall safety or hazard analysis is performed over the software architecture and modules, and then a detailed safety analysis based on the software FMEA (Failure Modes and Effect Analysis) method is applied to the ATIP program. For an efficient analysis, the software FMEA analysis is carried out based on the so-called failure-mode template extracted from the function blocks used in the function block diagram (FBD) for the ATIP software. The software safety analysis by the software FMEA analysis, being applied to the ATIP software code, which has been integrated and passed through a very rigorous system test procedure, is proven to be able to provide very valuable results (i.e., software defects) that could not be identified during various system tests

Criminal Network Investigation: Processes, Tools, and Techniques

DEFF Research Database (Denmark)

Petersen, Rasmus Rosenqvist

important challenge for criminal network investigation, despite the massive attention it receives from research and media. Challenges such as the investigation process, the context of the investigation, human factors such as thinking and creativity, and political decisions and legal laws are all challenges...... that could mean the success or failure of criminal network investigations. % include commission reports as indications of process related problems .. to "play a little politics" !! Information, process, and human factors, are challenges we find to be addressable by software system support. Based on those......Criminal network investigations such as police investigations, intelligence analysis, and investigative journalism involve a range of complex knowledge management processes and tasks. Criminal network investigators collect, process, and analyze information related to a specific target to create...

Automated transportation management system (ATMS) software project management plan (SPMP)

Energy Technology Data Exchange (ETDEWEB)

Weidert, R.S., Westinghouse Hanford

1996-05-20

The Automated Transportation Management System (ATMS) Software Project Management plan (SPMP) is the lead planning document governing the life cycle of the ATMS and its integration into the Transportation Information Network (TIN). This SPMP defines the project tasks, deliverables, and high level schedules involved in developing the client/server ATMS software.

Hardware and software maintenance strategies for upgrading vintage computers

International Nuclear Information System (INIS)

Wang, B.C.; Buijs, W.J.; Banting, R.D.

1992-01-01

The paper focuses on the maintenance of the computer hardware and software for digital control computers (DCC). Specific design and problems related to various maintenance strategies are reviewed. A foundation was required for a reliable computer maintenance and upgrading program to provide operation of the DCC with high availability and reliability for 40 years. This involved a carefully planned and executed maintenance and upgrading program, involving complementary hardware and software strategies. The computer system was designed on a modular basis, with large sections easily replaceable, to facilitate maintenance and improve availability of the system. Advances in computer hardware have made it possible to replace DCC peripheral devices with reliable, inexpensive, and widely available components from PC-based systems (PC = personal computer). By providing a high speed link from the DCC to a PC, it is now possible to use many commercial software packages to process data from the plant. 1 fig

IT Software Development and IT Operations Strategic Alignment: An Agile DevOps Model

Science.gov (United States)

Hart, Michael

2017-01-01

Information Technology (IT) departments that include development and operations are essential to develop software that meet customer needs. DevOps is a term originally constructed from software development and IT operations. DevOps includes the collaboration of all stakeholders such as software engineers and systems administrators involved in the…

Patterns of Software Development Process

Directory of Open Access Journals (Sweden)

Sandro Javier Bolaños Castro

2011-12-01

Full Text Available "Times New Roman","serif";mso-fareast-font-family:"Times New Roman";mso-ansi-language:EN-US;mso-fareast-language:EN-US;mso-bidi-language:AR-SA">This article presents a set of patterns that can be found to perform best practices in software processes that are directly related to the problem of implementing the activities of the process, the roles involved, the knowledge generated and the inputs and outputs belonging to the process. In this work, a definition of the architecture is encouraged by using different recurrent configurations that strengthen the process and yield efficient results for the development of a software project. The patterns presented constitute a catalog, which serves as a vocabulary for communication among project participants [1], [2], and also can be implemented through software tools, thus facilitating patterns implementation [3]. Additionally, a tool that can be obtained under GPL (General Public license is provided for this purpose

Certification of digital system software

International Nuclear Information System (INIS)

Waclo, J.; Cook, B.; Adomaitis, D.

1991-01-01

The activities involved in the successful application of digital systems to Nuclear Protection functions is not achieved through happenstance. At Westinghouse there has been a longstanding program to utilize digital state of the art technology for protection system advancement. Thereby gaining the advantages of increased system reliability, performance, ease of operation and reduced maintenance costs. This paper describes the Westinghouse background and experience in the safety system software development process, including Verification and Validation, and its application to protection system qualification and the successful use for licensing the Eagle 21 Digital Process Protection System Upgrade. In addition, the lessons learned from this experience are discussed from the perspective of improving the development process through applying feedback of the measurements made on the process and the software product quality. The goal of this process optimization is to produce the highest possible software quality while recognizing the real world constraints of available resources, project schedule and the regulatory policies that are customary in the nuclear industry

Modernization of tank floor scanning system (TAFLOSS) software

International Nuclear Information System (INIS)

Mohd Fitri Abdul Rahman; Jaafar Abdullah; Susan Maria Sipaun

2002-01-01

Tank Floor Scanning System (TAFLOSS) is a portable nucleonic device based on the scattering and moderation phenomena of neutrons. TAFLOSS, which was developed by MINT, can precisely and non-destructively measure the gap and hydrogen content in the foundation of a gigantic industrial tank in a practical and cost-effective manner. In recording and analysing measured data, three different computer software were used. In analysing the initial data, a Disk Operating System (DOS) based software called MesTank 3.0 have been developed. The system also used commercial software such as Table Curve 2D and SURFER for graphics purposes. Table Curve 2D was used to plot and evaluate curve fitting, whereas SURFER software used to draw contours. It is not user friendly and time consuming to switch from a software to another software for different tasks of this system. Therefore, the main objective of the project is to develop new user-friendly software that combined the old and commercial software into a single package. The computer programming language that was used to develop the software is Microsoft Visual C++ ver. 6.0. The process of developing this software involved complex mathematical calculation, curve fitting and contour plot. This paper describes the initial development of a computer programme for analysing the initial data and plotting exponential curve fitting. (Author)

Agile distributed software development

DEFF Research Database (Denmark)

Persson, John Stouby; Mathiassen, Lars; Aaen, Ivan

2012-01-01

While face-to-face interaction is fundamental in agile software development, distributed environments must rely extensively on mediated interactions. Practicing agile principles in distributed environments therefore poses particular control challenges related to balancing fixed vs. evolving quality...... requirements and people vs. process-based collaboration. To investigate these challenges, we conducted an in-depth case study of a successful agile distributed software project with participants from a Russian firm and a Danish firm. Applying Kirsch’s elements of control framework, we offer an analysis of how...

On Model Based Synthesis of Embedded Control Software

OpenAIRE

Alimguzhin, Vadim; Mari, Federico; Melatti, Igor; Salvo, Ivano; Tronci, Enrico

2012-01-01

Many Embedded Systems are indeed Software Based Control Systems (SBCSs), that is control systems whose controller consists of control software running on a microcontroller device. This motivates investigation on Formal Model Based Design approaches for control software. Given the formal model of a plant as a Discrete Time Linear Hybrid System and the implementation specifications (that is, number of bits in the Analog-to-Digital (AD) conversion) correct-by-construction control software can be...

Survey and assessment of conventional software verification and validation techniques

International Nuclear Information System (INIS)

Miller, L.A.; Groundwater, E.; Mirsky, S.M.

1993-02-01

Reliable software is required for nuclear power plant applications. Verification and validation (V ampersand V) techniques may be applied during software development to help eliminate errors that can inhibit the proper operation of digital systems and that may cause safety problems. EPRI and the NRC are cosponsoring this investigation to determine the best strategies for V ampersand V of expert system software. The strategy used for a particular system will depend on the complexity of the software and the level of integrity required. This report covers the first task in the investigation of reviewing methods for V ampersand V of conventional software systems and evaluating them for use with expert systems

Software architecture standard for simulation virtual machine, version 2.0

Science.gov (United States)

Sturtevant, Robert; Wessale, William

1994-01-01

The Simulation Virtual Machine (SBM) is an Ada architecture which eases the effort involved in the real-time software maintenance and sustaining engineering. The Software Architecture Standard defines the infrastructure which all the simulation models are built from. SVM was developed for and used in the Space Station Verification and Training Facility.

Guidelines for the verification and validation of expert system software and conventional software. Volume 7, User's manual: Final report

International Nuclear Information System (INIS)

Miller, L.A.; Hayes, J.E.; Mirsky, S.M.

1995-05-01

Reliable software is required for nuclear power industry applications. Verification and validation techniques applied during the software development process can help eliminate errors that could inhibit the proper operation of digital systems and cause availability and safety problems. Most of the techniques described in this report are valid for conventional software systems as well as for expert systems. The project resulted in a set of 16 V ampersand V guideline packages and 11 sets of procedures based on the class, development phase, and system component being tested. These guideline packages and procedures help a utility define the level of V ampersand V, which involves evaluating the complexity and type of software component along with the consequences of failure. In all, the project identified 153 V ampersand V techniques for conventional software systems and demonstrated their application to all aspects of expert systems except for the knowledge base, which requires specially developed tools. Each of these conventional techniques covers anywhere from 2-52 total types of conventional software defects, and each defect is covered by 21-50 V ampersand V techniques. The project also identified automated tools to Support V ampersand V activities

Critical Conversations: Feedback As A Stimulus To Creativity In Software Design

Directory of Open Access Journals (Sweden)

Raymond McCall

2010-01-01

Full Text Available Three decades of creating software to support design rationale showed the author how rationale processes can promote generation of novel ideas. Rationale can promote creative design by promoting critical conversations among designers and other project participants. Critical conversations intertwine ideation and evaluation, using feedback about consequences of decisions to challenge designers to devise new ideas. Such conversations take two forms. The first is discussion involving feedback from speculation about consequences of design decisions for implementation and use. The second is discussion involving feedback from actual experiences of implementation and use of the software being designed. The former is purely a process of reflective discourse, the latter a process of situated cognition involving both action and reflective discourse. Thus, the former is pure argumentation, the latter situated argumentation. Exploiting the full potential of critical conversations for creative design requires rethinking rationale methods and integrating them into software supporting implementation and use.

Sandia software guidelines: Software quality planning

Energy Technology Data Exchange (ETDEWEB)

1987-08-01

This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standard for Software Quality Assurance Plans, this volume identifies procedures to follow in producing a Software Quality Assurance Plan for an organization or a project, and provides an example project SQA plan. 2 figs., 4 tabs.

Software

Energy Technology Data Exchange (ETDEWEB)

Macedo, R.; Budd, G.; Ross, E.; Wells, P.

2010-07-15

The software section of this journal presented new software programs that have been developed to help in the exploration and development of hydrocarbon resources. Software provider IHS Inc. has made additions to its geological and engineering analysis software tool, IHS PETRA, a product used by geoscientists and engineers to visualize, analyze and manage well production, well log, drilling, reservoir, seismic and other related information. IHS PETRA also includes a directional well module and a decline curve analysis module to improve analysis capabilities in unconventional reservoirs. Petris Technology Inc. has developed a software to help manage the large volumes of data. PetrisWinds Enterprise (PWE) helps users find and manage wellbore data, including conventional wireline and MWD core data; analysis core photos and images; waveforms and NMR; and external files documentation. Ottawa-based Ambercore Software Inc. has been collaborating with Nexen on the Petroleum iQ software for steam assisted gravity drainage (SAGD) producers. Petroleum iQ integrates geology and geophysics data with engineering data in 3D and 4D. Calgary-based Envirosoft Corporation has developed a software that reduces the costly and time-consuming effort required to comply with Directive 39 of the Alberta Energy Resources Conservation Board. The product includes an emissions modelling software. Houston-based Seismic Micro-Technology (SMT) has developed the Kingdom software that features the latest in seismic interpretation. Holland-based Joa Oil and Gas and Calgary-based Computer Modelling Group have both supplied the petroleum industry with advanced reservoir simulation software that enables reservoir interpretation. The 2010 software survey included a guide to new software applications designed to facilitate petroleum exploration, drilling and production activities. Oil and gas producers can use the products for a range of functions, including reservoir characterization and accounting. In

Improving the quality of numerical software through user-centered design

Energy Technology Data Exchange (ETDEWEB)

Pancake, C. M., Oregon State University

1998-06-01

The software interface - whether graphical, command-oriented, menu-driven, or in the form of subroutine calls - shapes the user`s perception of what software can do. It also establishes upper bounds on software usability. Numerical software interfaces typically are based on the designer`s understanding of how the software should be used. That is a poor foundation for usability, since the features that are ``instinctively right`` from the developer`s perspective are often the very ones that technical programmers find most objectionable or most difficult to learn. This paper discusses how numerical software interfaces can be improved by involving users more actively in design, a process known as user-centered design (UCD). While UCD requires extra organization and effort, it results in much higher levels of usability and can actually reduce software costs. This is true not just for graphical user interfaces, but for all software interfaces. Examples show how UCD improved the usability of a subroutine library, a command language, and an invocation interface.

Building quality into performance and safety assessment software

International Nuclear Information System (INIS)

Wojciechowski, L.C.

2011-01-01

Quality assurance is integrated throughout the development lifecycle for performance and safety assessment software. The software used in the performance and safety assessment of a Canadian deep geological repository (DGR) follows the CSA quality assurance standard CSA-N286.7 [1], Quality Assurance of Analytical, Scientific and Design Computer Programs for Nuclear Power Plants. Quality assurance activities in this standard include tasks such as verification and inspection; however, much more is involved in producing a quality software computer program. The types of errors found with different verification methods are described. The integrated quality process ensures that defects are found and corrected as early as possible. (author)

Software for validating parameters retrieved from satellite

Digital Repository Service at National Institute of Oceanography (India)

Muraleedharan, P.M.; Sathe, P.V.; Pankajakshan, T.

-channel Scanning Microwave Radiometer (MSMR) onboard the Indian satellites Occansat-1 during 1999-2001 were validated using this software as a case study. The program has several added advantages over the conventional method of validation that involves strenuous...

Object oriented development of engineering software using CLIPS

Science.gov (United States)

Yoon, C. John

1991-01-01

Engineering applications involve numeric complexity and manipulations of a large amount of data. Traditionally, numeric computation has been the concern in developing an engineering software. As engineering application software became larger and more complex, management of resources such as data, rather than the numeric complexity, has become the major software design problem. Object oriented design and implementation methodologies can improve the reliability, flexibility, and maintainability of the resulting software; however, some tasks are better solved with the traditional procedural paradigm. The C Language Integrated Production System (CLIPS), with deffunction and defgeneric constructs, supports the procedural paradigm. The natural blending of object oriented and procedural paradigms has been cited as the reason for the popularity of the C++ language. The CLIPS Object Oriented Language's (COOL) object oriented features are more versatile than C++'s. A software design methodology based on object oriented and procedural approaches appropriate for engineering software, and to be implemented in CLIPS was outlined. A method for sensor placement for Space Station Freedom is being implemented in COOL as a sample problem.

Diagnostic on the appropriation of metrics in software medium enterprises of Medellin city

Directory of Open Access Journals (Sweden)

Piedad Metaute P.

2016-06-01

Full Text Available This article was produced as a result of the investigation, "Ownership and use of metrics in software medium-sized city of Medellin." The objective of this research was to conduct an assessment of the ownership and use of metrics, seeking to make recommendations that contribute to the strengthening of academia and the productive sector in this topic. The methodology used was based on documentary review related to international norms, standards, methodologies, guides and tools that address software quality metrics especially applicable during Software Engineering. The main sources consulted were books, journals and articles, which could raise the foundation for such research, likewise, field research was used, it applied to medium-sized enterprises engaged in the construction of the product, where contact he had with people involved in these processes, of which data pertaining to real contexts where the events are generated are obtained. topics were addressed as project control, process control, software engineering, control of product quality software, application time metrics, applying metrics at different stages, certifications metrics, methodologies, tools used, processes where contributions in their application, types of tests which are applied, among others, which resulted, argued discussion findings generated from the respective regulations, best practices and needs of different contexts where they are used metrics apply software products in addition to the respective conclusions and practical implications that allowed for an assessment of the ownership and use of metrics in software medium-sized city of Medellin, as well as some suggestions for the academy, aimed at strengthening subjects whose responsibility generating skills in Software Engineering, especially in the metrics, and contextualized for significant contributions to the industry.

Software Development Management: Empirical and Analytical Perspectives

Science.gov (United States)

Kang, Keumseok

2011-01-01

Managing software development is a very complex activity because it must deal with people, organizations, technologies, and business processes. My dissertation consists of three studies that examine software development management from various perspectives. The first study empirically investigates the impacts of prior experience with similar…

Automation software for a materials testing laboratory

Science.gov (United States)

Mcgaw, Michael A.; Bonacuse, Peter J.

1990-01-01

The software environment in use at the NASA-Lewis Research Center's High Temperature Fatigue and Structures Laboratory is reviewed. This software environment is aimed at supporting the tasks involved in performing materials behavior research. The features and capabilities of the approach to specifying a materials test include static and dynamic control mode switching, enabling multimode test control; dynamic alteration of the control waveform based upon events occurring in the response variables; precise control over the nature of both command waveform generation and data acquisition; and the nesting of waveform/data acquisition strategies so that material history dependencies may be explored. To eliminate repetitive tasks in the coventional research process, a communications network software system is established which provides file interchange and remote console capabilities.

Discriminant Analysis of the Effects of Software Cost Drivers on ...

African Journals Online (AJOL)

The paper work investigates the effect of software cost drivers on project schedule estimation of software development projects in Nigeria. Specifically, the paper determines the extent to which software cost variables affect our software project time schedule in our environment. Such studies are lacking in the recent ...

New software for computer-assisted dental-data matching in Disaster Victim Identification and long-term missing persons investigations: "DAVID Web".

Science.gov (United States)

Clement, J G; Winship, V; Ceddia, J; Al-Amad, S; Morales, A; Hill, A J

2006-05-15

In 1997 an internally supported but unfunded pilot project at the Victorian Institute of Forensic Medicine (VIFM) Australia led to the development of a computer system which closely mimicked Interpol paperwork for the storage, later retrieval and tentative matching of the many AM and PM dental records that are often needed for rapid Disaster Victim Identification. The program was called "DAVID" (Disaster And Victim IDentification). It combined the skills of the VIFM Information Technology systems manager (VW), an experienced odontologist (JGC) and an expert database designer (JC); all current authors on this paper. Students did much of the writing of software to prescription from Monash University. The student group involved won an Australian Information Industry Award in recognition of the contribution the new software could have made to the DVI process. Unfortunately, the potential of the software was never realized because paradoxically the federal nature of Australia frequently thwarts uniformity of systems across the entire country. As a consequence, the final development of DAVID never took place. Given the recent problems encountered post-tsunami by the odontologists who were obliged to use the Plass Data system (Plass Data Software, Holbaek, Denmark) and with the impending risks imposed upon Victoria by the decision to host the Commonwealth Games in Melbourne during March 2006, funding was sought and obtained from the state government to update counter disaster preparedness at the VIFM. Some of these funds have been made available to upgrade and complete the DAVID project. In the wake of discussions between leading expert odontologists from around the world held in Geneva during July 2003 at the invitation of the International Committee of the Red Cross significant alterations to the initial design parameters of DAVID were proposed. This was part of broader discussions directed towards developing instruments which could be used by the ICRC's "The Missing

Examining software complexity and quality for scientific software

International Nuclear Information System (INIS)

Kelly, D.; Shepard, T.

2005-01-01

Research has not found a simple relationship between software complexity and software quality, and particularly no relationship between commonly used software complexity metrics and the occurrence of software faults. A study with an example of scientific software from the nuclear power industry illustrates the importance of addressing cognitive complexity, the complexity related to understanding the intellectual content of the software. Simple practices such as aptly-named variables contributes more to high quality software than limiting code sizes. This paper examines the research into complexity and quality and reports on a longitudinal study using the example of nuclear software. (author)

SAGA: A project to automate the management of software production systems

Science.gov (United States)

Campbell, Roy H.; Laliberte, D.; Render, H.; Sum, R.; Smith, W.; Terwilliger, R.

1987-01-01

The Software Automation, Generation and Administration (SAGA) project is investigating the design and construction of practical software engineering environments for developing and maintaining aerospace systems and applications software. The research includes the practical organization of the software lifecycle, configuration management, software requirements specifications, executable specifications, design methodologies, programming, verification, validation and testing, version control, maintenance, the reuse of software, software libraries, documentation, and automated management.

SOFTWARE RETAILERS FROM BRAŞOV AND THE ONLINE STORES

Directory of Open Access Journals (Sweden)

Axenia Bianca BOITOR

2012-01-01

Full Text Available This paper presents the factors that influence the online marketing strategies of software vendors from Braşov County. An analysis of the software retailers’ attitudes from Braşov regarding online marketing and advertising was made. A survey among vendors from Braşov was undertaken and the results of this research show an orientation of lesser extent to online sales and marketing of the retailers’ activity. 20 responses were collected from software companies which trade software products and services in Braşov County. The results are very important for the companies that sell software products and services not only on the local market but also at national level. The paper presents the main reasons why software retailers from Braşov County, which is one of the most developed software markets in the country, have a lesser orientation towards online selling of software products and services. More than 400 companies involved in the software domain operate in Braşov City only. Research questions regarding the effects of the present economic situation, the online marketing strategies used in the software industry, and details about the online activity of each company where part of this research.

Quality assurance for software important to safety

International Nuclear Information System (INIS)

2000-01-01

Software applications play an increasingly relevant role in nuclear power plant systems. This is particularly true of software important to safety used in both: calculations for the design, testing and analysis of nuclear reactor systems (design, engineering and analysis software); and monitoring, control and safety functions as an integral part of the reactor systems (monitoring, control and safety system software). Computer technology is advancing at a fast pace, offering new possibilities in nuclear reactor design, construction, commissioning, operation, maintenance and decommissioning. These advances also present new issues which must be considered both by the utility and by the regulatory organization. Refurbishment of ageing instrumentation and control systems in nuclear power plants and new safety related application areas have emerged, with direct (e.g. interfaces with safety systems) and indirect (e.g. operator intervention) implications for safety. Currently, there exist several international standards and guides on quality assurance for software important to safety. However, none of the existing documents provides comprehensive guidance to the developer, manager and regulator during all phases of the software life-cycle. The present publication was developed taking into account the large amount of available documentation, the rapid development of software systems and the need for updated guidance on h ow to do it . It provides information and guidance for defining and implementing quality assurance programmes covering the entire life-cycle of software important to safety. Expected users are managers, performers and assessors from nuclear utilities, regulatory bodies, suppliers and technical support organizations involved with the development and use of software applied in nuclear power plants

An Investigation into the Involvement of California Central Valley High School Students with Disabilities in the IEP Process

Science.gov (United States)

Anderson, Cheryle Ann

2012-01-01

The purpose of this study was to investigate the involvement of California Central Valley high school students with disabilities in the Individual Education Plan (IEP) process. Specifically, this study investigated the involvement of students with disabilities in the development of the IEP and IEP meetings. In addition, this study explored the…

Direct Integration: Training Software Developers to Conduct Usability Evaluations

DEFF Research Database (Denmark)

Skov, Mikael B.; Stage, Jan

2008-01-01

is based on an empirical study where 36 teams with a total of 234 first-year university students on software development and design educations were trained in a simple approach for user-based website usability testing that was taught in a 40 hour course. This approach supported them in planning, conducting......Many improvements of the interplay between usability evaluation and software development rely either on better methods for conducting usability evaluations or on better formats for presenting evaluation results in ways that are useful for software designers and developers. Both approaches involve...... a complete division of work between developers and evaluators, which is an undesirable complexity for many software development projects. This paper takes a different approach by exploring to what extent software developers and designers can be trained to carry out their own usability evaluations. The paper...

Product-oriented Software Certification Process for Software Synthesis

Science.gov (United States)

Nelson, Stacy; Fischer, Bernd; Denney, Ewen; Schumann, Johann; Richardson, Julian; Oh, Phil

2004-01-01

The purpose of this document is to propose a product-oriented software certification process to facilitate use of software synthesis and formal methods. Why is such a process needed? Currently, software is tested until deemed bug-free rather than proving that certain software properties exist. This approach has worked well in most cases, but unfortunately, deaths still occur due to software failure. Using formal methods (techniques from logic and discrete mathematics like set theory, automata theory and formal logic as opposed to continuous mathematics like calculus) and software synthesis, it is possible to reduce this risk by proving certain software properties. Additionally, software synthesis makes it possible to automate some phases of the traditional software development life cycle resulting in a more streamlined and accurate development process.

The architecture of a reliable software monitoring system for embedded software systems

International Nuclear Information System (INIS)

Munson, J.; Krings, A.; Hiromoto, R.

2006-01-01

We develop the notion of a measurement-based methodology for embedded software systems to ensure properties of reliability, survivability and security, not only under benign faults but under malicious and hazardous conditions as well. The driving force is the need to develop a dynamic run-time monitoring system for use in these embedded mission critical systems. These systems must run reliably, must be secure and they must fail gracefully. That is, they must continue operating in the face of the departures from their nominal operating scenarios, the failure of one or more system components due to normal hardware and software faults, as well as malicious acts. To insure the integrity of embedded software systems, the activity of these systems must be monitored as they operate. For each of these systems, it is possible to establish a very succinct representation of nominal system activity. Furthermore, it is possible to detect departures from the nominal operating scenario in a timely fashion. Such departure may be due to various circumstances, e.g., an assault from an outside agent, thus forcing the system to operate in an off-nominal environment for which it was neither tested nor certified, or a hardware/software component that has ceased to operate in a nominal fashion. A well-designed system will have the property of graceful degradation. It must continue to run even though some of the functionality may have been lost. This involves the intelligent re-mapping of system functions. Those functions that are impacted by the failure of a system component must be identified and isolated. Thus, a system must be designed so that its basic operations may be re-mapped onto system components still operational. That is, the mission objectives of the software must be reassessed in terms of the current operational capabilities of the software system. By integrating the mechanisms to support observation and detection directly into the design methodology, we propose to shift

Software Development for EECU Platform of Turbofan Engine

Science.gov (United States)

Kim, Bo Gyoung; Kwak, Dohyup; Kim, Byunghyun; Choi, Hee ju; Kong, Changduk

2017-04-01

The turbofan engine operation consists of a number of hardware and software. The engine is controlled by Electronic Engine Control Unit (EECU). In order to control the engine, EECU communicates with an aircraft system, Actuator Drive Unit (ADU), Engine Power Unit (EPU) and sensors on the engine. This paper tried to investigate the process form starting to taking-off and aims to design the EECU software mode and defined communication data format. The software is implemented according to the designed software mode.

A concept of software testing for SMART MMIS software

International Nuclear Information System (INIS)

Seo, Yong Seok; Seong, Seung Hwan; Park, Keun Ok; Hur, Sub; Kim, Dong Hoon

2001-01-01

In order to achieve high quality of SMART MMIS software, the well-constructed software testing concept shall be required. This paper established software testing concept which is to be applied to SMART MMIS software, in terms of software testing organization, documentation. procedure, and methods. The software testing methods are classified into source code static analysis and dynamic testing. The software dynamic testing methods are discussed with two aspects: white-box and black-box testing. As software testing concept introduced in this paper is applied to the SMART MMIS software. the high quality of the software will be produced. In the future, software failure data will be collected through the construction of SMART MMIS prototyping facility which the software testing concept of this paper is applied to

Requirements Engineering in Building Climate Science Software

Science.gov (United States)

Batcheller, Archer L.

Software has an important role in supporting scientific work. This dissertation studies teams that build scientific software, focusing on the way that they determine what the software should do. These requirements engineering processes are investigated through three case studies of climate science software projects. The Earth System Modeling Framework assists modeling applications, the Earth System Grid distributes data via a web portal, and the NCAR (National Center for Atmospheric Research) Command Language is used to convert, analyze and visualize data. Document analysis, observation, and interviews were used to investigate the requirements-related work. The first research question is about how and why stakeholders engage in a project, and what they do for the project. Two key findings arise. First, user counts are a vital measure of project success, which makes adoption important and makes counting tricky and political. Second, despite the importance of quantities of users, a few particular "power users" develop a relationship with the software developers and play a special role in providing feedback to the software team and integrating the system into user practice. The second research question focuses on how project objectives are articulated and how they are put into practice. The team seeks to both build a software system according to product requirements but also to conduct their work according to process requirements such as user support. Support provides essential communication between users and developers that assists with refining and identifying requirements for the software. It also helps users to learn and apply the software to their real needs. User support is a vital activity for scientific software teams aspiring to create infrastructure. The third research question is about how change in scientific practice and knowledge leads to changes in the software, and vice versa. The "thickness" of a layer of software infrastructure impacts whether the

Software engineering technology transfer: Understanding the process

Science.gov (United States)

Zelkowitz, Marvin V.

1993-01-01

Technology transfer is of crucial concern to both government and industry today. In this report, the mechanisms developed by NASA to transfer technology are explored and the actual mechanisms used to transfer software development technologies are investigated. Time, cost, and effectiveness of software engineering technology transfer is reported.

International Collaboration in the Development of NPP Software

International Nuclear Information System (INIS)

Jiang, S.; Liu, L.; Yu, H.

2015-01-01

In this paper, we first review the progress and current status of international collaboration and technical exchange in the development of nuclear power plant (NPP) software by The State Nuclear Power Software Development Center (SNPSDC) in China. Then we discuss the importance of the international collaboration and exchange in the trend of globalisation of NPP technology. We also identify the role and contribution of professional women in this process. SNPSDC, the first professional software development centre for NPP in China, has been developing COSINE — a self-reliance NPP design and analysis software product with China brand—since 2010. Through participating in OECD/NEA’s joint projects, such as ROSA-2 Project, PKL–3 Project, HYMERES Project and ATLAS Project, SNPSDC shared data with other countries involved with respect to particular areas, such as high quality reactor thermal hydraulics test data. SNPSDC’s engineers have also been actively participating in international technical and research exchange for presenting their innovative work to the community while learning from peers. Our record shows that over 30 papers have been presented in international conferences with respect to nuclear reactor thermal hydraulics, safety analysis, reactor physics and software engineering within the past 4 years. The above international collaboration and technical exchange helped SNPSDC’s engineers to keep up with the state-of-art technology in this field. The large amount of valuable experimental data transferred to SNPSDC ensured the functionality, usability and reliability of software while greatly reduced the cost and shortened the cycle of development. Female engineers and other employees of SNPSDC either drove or got actively involved in a lot of aspects of the above collaboration and exchange, such as technical communication, business negotiation and overseas affairs management. These professional women played an irreplaceable role in this project by

Strategies for successful software development risk management

Directory of Open Access Journals (Sweden)

Marija Boban

2003-01-01

Full Text Available Nowadays, software is becoming a major part of enterprise business. Software development is activity connected with advanced technology and high level of knowledge. Risks on software development projects must be successfully mitigated to produce successful software systems. Lack of a defined approach to risk management is one of the common causes for project failures. To improve project chances for success, this work investigates common risk impact areas to perceive a foundation that can be used to define a common approach to software risk management. Based on typical risk impact areas on software development projects, we propose three risk management strategies suitable for a broad area of enterprises and software development projects with different amounts of connected risks. Proposed strategies define activities that should be performed for successful risk management, the one that will enable software development projects to perceive risks as soon as possible and to solve problems connected with risk materialization. We also propose a risk-based approach to software development planning and risk management as attempts to address and retire the highest impact risks as early as possible in the development process. Proposed strategies should improve risk management on software development projects and help create a successful software solution.

Software reliability growth model for safety systems of nuclear reactor

International Nuclear Information System (INIS)

Thirugnana Murthy, D.; Murali, N.; Sridevi, T.; Satya Murty, S.A.V.; Velusamy, K.

2014-01-01

The demand for complex software systems has increased more rapidly than the ability to design, implement, test, and maintain them, and the reliability of software systems has become a major concern for our, modern society.Software failures have impaired several high visibility programs in space, telecommunications, defense and health industries. Besides the costs involved, it setback the projects. The ways of quantifying it and using it for improvement and control of the software development and maintenance process. This paper discusses need for systematic approaches for measuring and assuring software reliability which is a major share of project development resources. It covers the reliability models with the concern on 'Reliability Growth'. It includes data collection on reliability, statistical estimation and prediction, metrics and attributes of product architecture, design, software development, and the operational environment. Besides its use for operational decisions like deployment, it includes guiding software architecture, development, testing and verification and validation. (author)

Managing Risk Areas in Software Development Offshoring

DEFF Research Database (Denmark)

Persson, John Stouby; Schlichter, Bjarne Rerup

2015-01-01

Software companies are increasingly offshoring development to countries with high expertise at lower cost. Offshoring involves particular risk areas that if ignored increase the likelihood of failure. However, the offshoring client’s maturity level may influence the management of these risk areas...

Study of evaluation techniques of software safety and reliability in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Youn, Cheong; Baek, Y. W.; Kim, H. C.; Park, N. J.; Shin, C. Y. [Chungnam National Univ., Taejon (Korea, Republic of)

1999-04-15

Software system development process and software quality assurance activities are examined in this study. Especially software safety and reliability requirements in nuclear power plant are investigated. For this purpose methodologies and tools which can be applied to software analysis, design, implementation, testing, maintenance step are evaluated. Necessary tasks for each step are investigated. Duty, input, and detailed activity for each task are defined to establish development process of high quality software system. This means applying basic concepts of software engineering and principles of system development. This study establish a guideline that can assure software safety and reliability requirements in digitalized nuclear plant systems and can be used as a guidebook of software development process to assure software quality many software development organization.

SU-F-T-493: An Investigation Into the Feasibility of Using PipsPro Software with Film for Linac QA

International Nuclear Information System (INIS)

Underwood, R

2016-01-01

Purpose: To determine the feasibility of using radiochromic and radiographic film with Pipspro software for quality assurance of linear accelerators with no on-board imaging. Methods: The linear accelerator being used is a Varian Clinac 21EX. All IGRT is performed using the BrainLab ExacTrac system. Because of the lack of on board imaging, certain monthly and annual TG-142 quality assurance tests are more difficult to perform and analyze to a high degree of accuracy. Pipspro was not designed to be used with hard film, and to our knowledge its use with film had not been investigated. The film used will be GafChromic EBT3 film and Kodak EDR2 film, scanned with an Epson V700 scanner. The following routine tests will be attempted: MLC picket fence, light vs. radiation field coincidence, starshots, and MLC transmission. Results: The only tests that gave accurate and reliable results were the couch, gantry, and collimator starshots. Typical MV and kV images are acquired with a much higher level of contrast between the irradiated and non-irradiated areas when compared to film. Pipspro relies on this level of contrast to be able to automatically detect the fiducial points from its phantom devices, leaf edges for picket fence and transmission tests, and jaw edges for light vs. radiation field tests. Because of this, certain tests gave erroneous results and others were not able to be performed in the software at all, with either type of film. The number of monitor units delivered to the film, the experimental setup, and the scan settings was not able to rectify the problem. Conclusion: For linear accelerators with no on-board imaging, it is not recommended to use hard film with PipsPro to perform TG-142 quality assurance tests. Other software or methods should instead be investigated.

SU-E-P-43: A Knowledge Based Approach to Guidelines for Software Safety

International Nuclear Information System (INIS)

Salomons, G; Kelly, D

2015-01-01

Purpose: In the fall of 2012, a survey was distributed to medical physicists across Canada. The survey asked the respondents to comment on various aspects of software development and use in their clinic. The survey revealed that most centers employ locally produced (in-house) software of some kind. The respondents also indicated an interest in having software guidelines, but cautioned that the realities of cancer clinics include variations, that preclude a simple solution. Traditional guidelines typically involve periodically repeating a set of prescribed tests with defined tolerance limits. However, applying a similar formula to software is problematic since it assumes that the users have a perfect knowledge of how and when to apply the software and that if the software operates correctly under one set of conditions it will operate correctly under all conditions Methods: In the approach presented here the personnel involved with the software are included as an integral part of the system. Activities performed to improve the safety of the software are done with both software and people in mind. A learning oriented approach is taken, following the premise that the best approach to safety is increasing the understanding of those associated with the use or development of the software. Results: The software guidance document is organized by areas of knowledge related to use and development of software. The categories include: knowledge of the underlying algorithm and its limitations; knowledge of the operation of the software, such as input values, parameters, error messages, and interpretation of output; and knowledge of the environment for the software including both data and users. Conclusion: We propose a new approach to developing guidelines which is based on acquiring knowledge-rather than performing tests. The ultimate goal is to provide robust software guidelines which will be practical and effective

SU-E-P-43: A Knowledge Based Approach to Guidelines for Software Safety

Energy Technology Data Exchange (ETDEWEB)

Salomons, G [Cancer Center of Southeastern Ontario & Queen’s University, Kingston, ON (Canada); Kelly, D [Royal Military College of Canada, Kingston, ON, CA (Canada)

2015-06-15

Purpose: In the fall of 2012, a survey was distributed to medical physicists across Canada. The survey asked the respondents to comment on various aspects of software development and use in their clinic. The survey revealed that most centers employ locally produced (in-house) software of some kind. The respondents also indicated an interest in having software guidelines, but cautioned that the realities of cancer clinics include variations, that preclude a simple solution. Traditional guidelines typically involve periodically repeating a set of prescribed tests with defined tolerance limits. However, applying a similar formula to software is problematic since it assumes that the users have a perfect knowledge of how and when to apply the software and that if the software operates correctly under one set of conditions it will operate correctly under all conditions Methods: In the approach presented here the personnel involved with the software are included as an integral part of the system. Activities performed to improve the safety of the software are done with both software and people in mind. A learning oriented approach is taken, following the premise that the best approach to safety is increasing the understanding of those associated with the use or development of the software. Results: The software guidance document is organized by areas of knowledge related to use and development of software. The categories include: knowledge of the underlying algorithm and its limitations; knowledge of the operation of the software, such as input values, parameters, error messages, and interpretation of output; and knowledge of the environment for the software including both data and users. Conclusion: We propose a new approach to developing guidelines which is based on acquiring knowledge-rather than performing tests. The ultimate goal is to provide robust software guidelines which will be practical and effective.

Study of evaluation techniques of software configuration management and reliability

Energy Technology Data Exchange (ETDEWEB)

Youn, Cheong; Baek, Y. W.; Kim, H. C.; Han, H. C.; Choi, C. R. [Chungnam National Univ., Taejon (Korea, Republic of)

2001-03-15

The Study of activities to solve software safety and quality must be executed in base of establishing software development process for digitalized nuclear plant. Especially study of software testing and Verification and Validation must executed. For this purpose methodologies and tools which can improve software qualities are evaluated and software Testing, V and V and Configuration Management which can be applied to software life cycle are investigated. This study establish a guideline that can be used to assure software safety and reliability requirements in digitalized nuclear plant systems.

Software Maintenance and Evolution: The Implication for Software ...

African Journals Online (AJOL)

Software Maintenance and Evolution: The Implication for Software Development. ... Software maintenance is the process of modifying existing operational software by correcting errors, ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Software, component, and service deployment in computational Grids

International Nuclear Information System (INIS)

von Laszewski, G.; Blau, E.; Bletzinger, M.; Gawor, J.; Lane, P.; Martin, S.; Russell, M.

2002-01-01

Grids comprise an infrastructure that enables scientists to use a diverse set of distributed remote services and resources as part of complex scientific problem-solving processes. We analyze some of the challenges involved in deploying software and components transparently in Grids. We report on three practical solutions used by the Globus Project. Lessons learned from this experience lead us to believe that it is necessary to support a variety of software and component deployment strategies. These strategies are based on the hosting environment

CARDS: A blueprint and environment for domain-specific software reuse

Science.gov (United States)

Wallnau, Kurt C.; Solderitsch, Anne Costa; Smotherman, Catherine

1992-01-01

CARDS (Central Archive for Reusable Defense Software) exploits advances in domain analysis and domain modeling to identify, specify, develop, archive, retrieve, understand, and reuse domain-specific software components. An important element of CARDS is to provide visibility into the domain model artifacts produced by, and services provided by, commercial computer-aided software engineering (CASE) technology. The use of commercial CASE technology is important to provide rich, robust support for the varied roles involved in a reuse process. We refer to this kind of use of knowledge representation systems as supporting 'knowledge-based integration.'

An Ada Linear-Algebra Software Package Modeled After HAL/S

Science.gov (United States)

Klumpp, Allan R.; Lawson, Charles L.

1990-01-01

New avionics software written more easily. Software package extends Ada programming language to include linear-algebra capabilities similar to those of HAL/S programming language. Designed for such avionics applications as Space Station flight software. In addition to built-in functions of HAL/S, package incorporates quaternion functions used in Space Shuttle and Galileo projects and routines from LINPAK solving systems of equations involving general square matrices. Contains two generic programs: one for floating-point computations and one for integer computations. Written on IBM/AT personal computer running under PC DOS, v.3.1.

Investigation of large α production in reactions involving weakly bound 7Li

Science.gov (United States)

Pandit, S. K.; Shrivastava, A.; Mahata, K.; Parkar, V. V.; Palit, R.; Keeley, N.; Rout, P. C.; Kumar, A.; Ramachandran, K.; Bhattacharyya, S.; Nanal, V.; Palshetkar, C. S.; Nag, T. N.; Gupta, Shilpi; Biswas, S.; Saha, S.; Sethi, J.; Singh, P.; Chatterjee, A.; Kailas, S.

2017-10-01

The origin of the large α -particle production cross sections in systems involving weakly bound 7Li projectiles has been investigated by measuring the cross sections of all possible fragment-capture as well as complete fusion using the particle-γ coincidence, in-beam, and off-beam γ -ray counting techniques for the 7Li+93Nb system at near Coulomb barrier energies. Almost all of the inclusive α -particle yield has been accounted for. While the t -capture mechanism is found to be dominant (˜70 % ), compound nuclear evaporation and breakup processes contribute ˜15 % each to the inclusive α -particle production in the measured energy range. Systematic behavior of the t capture and inclusive α cross sections for reactions involving 7Li over a wide mass range is also reported.

Contribuição dos modelos de qualidade e maturidade na melhoria dos processos de software Contribution of quality and maturity models to software process improvement

Directory of Open Access Journals (Sweden)

Antonio Carlos Tonini

2008-01-01

Full Text Available Grande parte das empresas desenvolvedoras de software criou seu próprio processo de trabalho. Devido à rápida expansão do mercado de software, a concorrência ocorre muito mais em custo do que em diferenciação. Para obter vantagem competitiva, as empresas devem atualizar-se continuamente na tecnologia, buscar a maturidade nos processos e eliminar a ineficiência operacional. Isso requer um envolvimento das pessoas, dos processos e da organização como um todo. O artigo discute a implementação de melhorias nos processos de software segundo os principais modelos de qualidade e de maturidade. Com base em um Estudo de Casos Múltiplos, verifica-se que a melhoria dos processos de software requer que a melhoria ocorra primeiramente entre cada um dos desenvolvedores e, a seguir, envolva os grupos de desenvolvimento e por fim, a organização como um todo. A pesquisa conclui que os modelos de qualidade e maturidade servem como orientadores do processo de melhoria.Many software development companies have developed their own work method. Due to the fast software market growth, the competition focuses more on cost than on differentiation. To achieve competitive advantage, software developer organizations must continually update their technology, reach high level process maturity and eliminate all the operational inefficiency. These procedures involve people, processes and the whole organization. The aim of the paper is to discuss software process improvement implementation according to the most important quality and maturity models. Based on a Multiple Case Study, it is verified that the software process improvement needs firstly individual improvement and, later, it involves the developer teams and the whole organization. The research concludes that the quality and maturity models must be used as improvement process drivers.

Software reliability and safety in nuclear reactor protection systems

Energy Technology Data Exchange (ETDEWEB)

Lawrence, J.D. [Lawrence Livermore National Lab., CA (United States)

1993-11-01

Planning the development, use and regulation of computer systems in nuclear reactor protection systems in such a way as to enhance reliability and safety is a complex issue. This report is one of a series of reports from the Computer Safety and Reliability Group, Lawrence Livermore that investigates different aspects of computer software in reactor National Laboratory, that investigates different aspects of computer software in reactor protection systems. There are two central themes in the report, First, software considerations cannot be fully understood in isolation from computer hardware and application considerations. Second, the process of engineering reliability and safety into a computer system requires activities to be carried out throughout the software life cycle. The report discusses the many activities that can be carried out during the software life cycle to improve the safety and reliability of the resulting product. The viewpoint is primarily that of the assessor, or auditor.

Software reliability and safety in nuclear reactor protection systems

International Nuclear Information System (INIS)

Lawrence, J.D.

1993-11-01

Planning the development, use and regulation of computer systems in nuclear reactor protection systems in such a way as to enhance reliability and safety is a complex issue. This report is one of a series of reports from the Computer Safety and Reliability Group, Lawrence Livermore that investigates different aspects of computer software in reactor National Laboratory, that investigates different aspects of computer software in reactor protection systems. There are two central themes in the report, First, software considerations cannot be fully understood in isolation from computer hardware and application considerations. Second, the process of engineering reliability and safety into a computer system requires activities to be carried out throughout the software life cycle. The report discusses the many activities that can be carried out during the software life cycle to improve the safety and reliability of the resulting product. The viewpoint is primarily that of the assessor, or auditor

Empirical studies of design software: Implications for software engineering environments

Science.gov (United States)

Krasner, Herb

1988-01-01

The empirical studies team of MCC's Design Process Group conducted three studies in 1986-87 in order to gather data on professionals designing software systems in a range of situations. The first study (the Lift Experiment) used thinking aloud protocols in a controlled laboratory setting to study the cognitive processes of individual designers. The second study (the Object Server Project) involved the observation, videotaping, and data collection of a design team of a medium-sized development project over several months in order to study team dynamics. The third study (the Field Study) involved interviews with the personnel from 19 large development projects in the MCC shareholders in order to study how the process of design is affected by organizationl and project behavior. The focus of this report will be on key observations of design process (at several levels) and their implications for the design of environments.

Software reliability growth models with normal failure time distributions

International Nuclear Information System (INIS)

Okamura, Hiroyuki; Dohi, Tadashi; Osaki, Shunji

2013-01-01

This paper proposes software reliability growth models (SRGM) where the software failure time follows a normal distribution. The proposed model is mathematically tractable and has sufficient ability of fitting to the software failure data. In particular, we consider the parameter estimation algorithm for the SRGM with normal distribution. The developed algorithm is based on an EM (expectation-maximization) algorithm and is quite simple for implementation as software application. Numerical experiment is devoted to investigating the fitting ability of the SRGMs with normal distribution through 16 types of failure time data collected in real software projects

AWARE-P: a collaborative, system-based IAM planning software

OpenAIRE

Coelho, S. T.; Vitorino, D.

2011-01-01

The AWARE-P project aims to promote the application of integrated and risk-based approaches to the rehabilitation of urban water supply and wastewater drainage systems. Central to the project is the development of a software platform based on a set of computational components, which assist in the analyses and decision support involved in the planning process for sustainable infrastructural asset management. The AWARE-P software system brings together onto a common platform the inf...

Software Engineering Program: Software Process Improvement Guidebook

Science.gov (United States)

1996-01-01

The purpose of this document is to provide experience-based guidance in implementing a software process improvement program in any NASA software development or maintenance community. This guidebook details how to define, operate, and implement a working software process improvement program. It describes the concept of the software process improvement program and its basic organizational components. It then describes the structure, organization, and operation of the software process improvement program, illustrating all these concepts with specific NASA examples. The information presented in the document is derived from the experiences of several NASA software organizations, including the SEL, the SEAL, and the SORCE. Their experiences reflect many of the elements of software process improvement within NASA. This guidebook presents lessons learned in a form usable by anyone considering establishing a software process improvement program within his or her own environment. This guidebook attempts to balance general and detailed information. It provides material general enough to be usable by NASA organizations whose characteristics do not directly match those of the sources of the information and models presented herein. It also keeps the ideas sufficiently close to the sources of the practical experiences that have generated the models and information.

On the impact of medical device regulations on software architecture

DEFF Research Database (Denmark)

Hansen, Klaus Marius; Manikas, Konstantinos

2016-01-01

Compliance to regulations and regulatory approval are requirements for many medical device software systems. In this paper, we investigate the implications of medical device software regulations to the design of software systems. We do so by focusing on the American and European regulatory author...... of the device. Moreover, we review software modularity in the implementation of software medical device and propose a set of preliminary principles for architectural design of software medical device based on a set of constrains identified from the reviewed regulations....

A Data Specification for Software Project Performance Measures: Results of a Collaboration on Performance Measurement

National Research Council Canada - National Science Library

Kasunic, Mark

2008-01-01

... between completed projects. These terms and definitions were developed using a collaborative, consensus-based approach involving the Software Engineering Institute's Software Engineering Process Management program and service...

Improving Video Game Development: Facilitating Heterogeneous Team Collaboration through Flexible Software Processes

Science.gov (United States)

Musil, Juergen; Schweda, Angelika; Winkler, Dietmar; Biffl, Stefan

Based on our observations of Austrian video game software development (VGSD) practices we identified a lack of systematic processes/method support and inefficient collaboration between various involved disciplines, i.e. engineers and artists. VGSD includes heterogeneous disciplines, e.g. creative arts, game/content design, and software. Nevertheless, improving team collaboration and process support is an ongoing challenge to enable a comprehensive view on game development projects. Lessons learned from software engineering practices can help game developers to increase game development processes within a heterogeneous environment. Based on a state of the practice survey in the Austrian games industry, this paper presents (a) first results with focus on process/method support and (b) suggests a candidate flexible process approach based on Scrum to improve VGSD and team collaboration. Results showed (a) a trend to highly flexible software processes involving various disciplines and (b) identified the suggested flexible process approach as feasible and useful for project application.

Software quality assurance plans for safety-critical software

International Nuclear Information System (INIS)

Liddle, P.

2006-01-01

Application software is defined as safety-critical if a fault in the software could prevent the system components from performing their nuclear-safety functions. Therefore, for nuclear-safety systems, the AREVA TELEPERM R XS (TXS) system is classified 1E, as defined in the Inst. of Electrical and Electronics Engineers (IEEE) Std 603-1998. The application software is classified as Software Integrity Level (SIL)-4, as defined in IEEE Std 7-4.3.2-2003. The AREVA NP Inc. Software Program Manual (SPM) describes the measures taken to ensure that the TELEPERM XS application software attains a level of quality commensurate with its importance to safety. The manual also describes how TELEPERM XS correctly performs the required safety functions and conforms to established technical and documentation requirements, conventions, rules, and standards. The program manual covers the requirements definition, detailed design, integration, and test phases for the TELEPERM XS application software, and supporting software created by AREVA NP Inc. The SPM is required for all safety-related TELEPERM XS system applications. The program comprises several basic plans and practices: 1. A Software Quality-Assurance Plan (SQAP) that describes the processes necessary to ensure that the software attains a level of quality commensurate with its importance to safety function. 2. A Software Safety Plan (SSP) that identifies the process to reasonably ensure that safety-critical software performs as intended during all abnormal conditions and events, and does not introduce any new hazards that could jeopardize the health and safety of the public. 3. A Software Verification and Validation (V and V) Plan that describes the method of ensuring the software is in accordance with the requirements. 4. A Software Configuration Management Plan (SCMP) that describes the method of maintaining the software in an identifiable state at all times. 5. A Software Operations and Maintenance Plan (SO and MP) that

Intellectual Property Protection of Software – At the Crossroads of Software Patents and Open Source Software

OpenAIRE

Tantarimäki, Maria

2018-01-01

The thesis considers the intellectual property protection of software in Europe and in the US, which is increasingly important subject as the world is globalizing and digitalizing. The special nature of software has challenges the intellectual property rights. The current protection of software is based on copyright protection but in this thesis, two other options are considered: software patents and open source software. Software patents provide strong protection for software whereas the pur...

Software Quality Assurance in Software Projects: A Study of Pakistan

OpenAIRE

Faisal Shafique Butt; Sundus Shaukat; M. Wasif Nisar; Ehsan Ullah Munir; Muhammad Waseem; Kashif Ayyub

2013-01-01

Software quality is specific property which tells what kind of standard software should have. In a software project, quality is the key factor of success and decline of software related organization. Many researches have been done regarding software quality. Software related organization follows standards introduced by Capability Maturity Model Integration (CMMI) to achieve good quality software. Quality is divided into three main layers which are Software Quality Assurance (SQA), Software Qu...

Software Prototyping

Science.gov (United States)

Del Fiol, Guilherme; Hanseler, Haley; Crouch, Barbara Insley; Cummins, Mollie R.

2016-01-01

Summary Background Health information exchange (HIE) between Poison Control Centers (PCCs) and Emergency Departments (EDs) could improve care of poisoned patients. However, PCC information systems are not designed to facilitate HIE with EDs; therefore, we are developing specialized software to support HIE within the normal workflow of the PCC using user-centered design and rapid prototyping. Objective To describe the design of an HIE dashboard and the refinement of user requirements through rapid prototyping. Methods Using previously elicited user requirements, we designed low-fidelity sketches of designs on paper with iterative refinement. Next, we designed an interactive high-fidelity prototype and conducted scenario-based usability tests with end users. Users were asked to think aloud while accomplishing tasks related to a case vignette. After testing, the users provided feedback and evaluated the prototype using the System Usability Scale (SUS). Results Survey results from three users provided useful feedback that was then incorporated into the design. After achieving a stable design, we used the prototype itself as the specification for development of the actual software. Benefits of prototyping included having 1) subject-matter experts heavily involved with the design; 2) flexibility to make rapid changes, 3) the ability to minimize software development efforts early in the design stage; 4) rapid finalization of requirements; 5) early visualization of designs; 6) and a powerful vehicle for communication of the design to the programmers. Challenges included 1) time and effort to develop the prototypes and case scenarios; 2) no simulation of system performance; 3) not having all proposed functionality available in the final product; and 4) missing needed data elements in the PCC information system. PMID:27081404

Verification and Validation in a Rapid Software Development Process

Science.gov (United States)

Callahan, John R.; Easterbrook, Steve M.

1997-01-01

The high cost of software production is driving development organizations to adopt more automated design and analysis methods such as rapid prototyping, computer-aided software engineering (CASE) tools, and high-level code generators. Even developers of safety-critical software system have adopted many of these new methods while striving to achieve high levels Of quality and reliability. While these new methods may enhance productivity and quality in many cases, we examine some of the risks involved in the use of new methods in safety-critical contexts. We examine a case study involving the use of a CASE tool that automatically generates code from high-level system designs. We show that while high-level testing on the system structure is highly desirable, significant risks exist in the automatically generated code and in re-validating releases of the generated code after subsequent design changes. We identify these risks and suggest process improvements that retain the advantages of rapid, automated development methods within the quality and reliability contexts of safety-critical projects.

TF-finder: A software package for identifying transcription factors involved in biological processes using microarray data and existing knowledge base

Directory of Open Access Journals (Sweden)

Cui Xiaoqi

2010-08-01

Full Text Available Abstract Background Identification of transcription factors (TFs involved in a biological process is the first step towards a better understanding of the underlying regulatory mechanisms. However, due to the involvement of a large number of genes and complicated interactions in a gene regulatory network (GRN, identification of the TFs involved in a biology process remains to be very challenging. In reality, the recognition of TFs for a given a biological process can be further complicated by the fact that most eukaryotic genomes encode thousands of TFs, which are organized in gene families of various sizes and in many cases with poor sequence conservation except for small conserved domains. This poses a significant challenge for identification of the exact TFs involved or ranking the importance of a set of TFs to a process of interest. Therefore, new methods for recognizing novel TFs are desperately needed. Although a plethora of methods have been developed to infer regulatory genes using microarray data, it is still rare to find the methods that use existing knowledge base in particular the validated genes known to be involved in a process to bait/guide discovery of novel TFs. Such methods can replace the sometimes-arbitrary process of selection of candidate genes for experimental validation and significantly advance our knowledge and understanding of the regulation of a process. Results We developed an automated software package called TF-finder for recognizing TFs involved in a biological process using microarray data and existing knowledge base. TF-finder contains two components, adaptive sparse canonical correlation analysis (ASCCA and enrichment test, for TF recognition. ASCCA uses positive target genes to bait TFS from gene expression data while enrichment test examines the presence of positive TFs in the outcomes from ASCCA. Using microarray data from salt and water stress experiments, we showed TF-finder is very efficient in recognizing

A software engineering process for safety-critical software application

International Nuclear Information System (INIS)

Kang, Byung Heon; Kim, Hang Bae; Chang, Hoon Seon; Jeon, Jong Sun

1995-01-01

Application of computer software to safety-critical systems in on the increase. To be successful, the software must be designed and constructed to meet the functional and performance requirements of the system. For safety reason, the software must be demonstrated not only to meet these requirements, but also to operate safely as a component within the system. For longer-term cost consideration, the software must be designed and structured to ease future maintenance and modifications. This paper presents a software engineering process for the production of safety-critical software for a nuclear power plant. The presentation is expository in nature of a viable high quality safety-critical software development. It is based on the ideas of a rational design process and on the experience of the adaptation of such process in the production of the safety-critical software for the shutdown system number two of Wolsung 2, 3 and 4 nuclear power generation plants. This process is significantly different from a conventional process in terms of rigorous software development phases and software design techniques, The process covers documentation, design, verification and testing using mathematically precise notations and highly reviewable tabular format to specify software requirements and software requirements and software requirements and code against software design using static analysis. The software engineering process described in this paper applies the principle of information-hiding decomposition in software design using a modular design technique so that when a change is required or an error is detected, the affected scope can be readily and confidently located. it also facilitates a sense of high degree of confidence in the 'correctness' of the software production, and provides a relatively simple and straightforward code implementation effort. 1 figs., 10 refs. (Author)

Software architecture analysis tool : software architecture metrics collection

NARCIS (Netherlands)

Muskens, J.; Chaudron, M.R.V.; Westgeest, R.

2002-01-01

The Software Engineering discipline lacks the ability to evaluate software architectures. Here we describe a tool for software architecture analysis that is based on metrics. Metrics can be used to detect possible problems and bottlenecks in software architectures. Even though metrics do not give a

The dynamics of software development project management: An integrative systems dynamic perspective

Science.gov (United States)

Vandervelde, W. E.; Abdel-Hamid, T.

1984-01-01

Rather than continuing to focus on software development projects per se, the system dynamics modeling approach outlined is extended to investigate a broader set of issues pertaining to the software development organization. Rather than trace the life cycle(s) of one or more software projects, the focus is on the operations of a software development department as a continuous stream of software products are developed, placed into operation, and maintained. A number of research questions are ""ripe'' for investigating including: (1) the efficacy of different organizational structures in different software development environments, (2) personnel turnover, (3) impact of management approaches such as management by objectives, and (4) the organizational/environmental determinants of productivity.

The Elusive Cost of Library Software

Science.gov (United States)

Breeding, Marshall

2009-01-01

Software pricing is not a straightforward issue, since each procurement involves a special business arrangement between a library and its chosen vendor. The author thinks that it is reasonable to scale the cost of a product to such factors as the size of the library, the complexity of the installation, the number of simultaneous users, or the…

Customer Interaction in Software Development: A Comparison of Software Methodologies Deployed in Namibian Software Firms

CSIR Research Space (South Africa)

Iyawa, GE

2016-01-01

Full Text Available within the Namibian context. An implication for software project managers and software developers is that customer interaction should be properly managed to ensure that the software methodologies for improving software development processes...

A SOFTWARE RELIABILITY ESTIMATION METHOD TO NUCLEAR SAFETY SOFTWARE

Directory of Open Access Journals (Sweden)

GEE-YONG PARK

2014-02-01

Full Text Available A method for estimating software reliability for nuclear safety software is proposed in this paper. This method is based on the software reliability growth model (SRGM, where the behavior of software failure is assumed to follow a non-homogeneous Poisson process. Two types of modeling schemes based on a particular underlying method are proposed in order to more precisely estimate and predict the number of software defects based on very rare software failure data. The Bayesian statistical inference is employed to estimate the model parameters by incorporating software test cases as a covariate into the model. It was identified that these models are capable of reasonably estimating the remaining number of software defects which directly affects the reactor trip functions. The software reliability might be estimated from these modeling equations, and one approach of obtaining software reliability value is proposed in this paper.

[The development and evaluation of software to verify diagnostic accuracy].

Science.gov (United States)

Jensen, Rodrigo; de Moraes Lopes, Maria Helena Baena; Silveira, Paulo Sérgio Panse; Ortega, Neli Regina Siqueira

2012-02-01

This article describes the development and evaluation of software that verifies the accuracy of diagnoses made by nursing students. The software was based on a model that uses fuzzy logic concepts, including PERL, the MySQL database for Internet accessibility, and the NANDA-I 2007-2008 classification system. The software was evaluated in terms of its technical quality and usability through specific instruments. The activity proposed in the software involves four stages in which students establish the relationship values between nursing diagnoses, defining characteristics/risk factors and clinical cases. The relationship values determined by students are compared to those of specialists, generating performance scores for the students. In the evaluation, the software demonstrated satisfactory outcomes regarding the technical quality and, according to the students, helped in their learning and may become an educational tool to teach the process of nursing diagnosis.

An investigation into the long-term impact of the calibration of software estimation models using raw historical data

OpenAIRE

Shadle, Daryl Allen.

1994-01-01

Approved for public release, distribution unlimited The benefit of software cost estimation is universally recognized as one of the cornerstones of effective software project management and control. Despite the advances of computer-based estimation tools, their accuracy remains largely inadequate, and their utility among software development practitioners is limited. Consequently, the optimal estimation of software cost remains an elusive goal of most project managers. Central to this issu...

ALMA software architecture

Science.gov (United States)

Schwarz, Joseph; Raffi, Gianni

2002-12-01

The Atacama Large Millimeter Array (ALMA) is a joint project involving astronomical organizations in Europe and North America. ALMA will consist of at least 64 12-meter antennas operating in the millimeter and sub-millimeter range. It will be located at an altitude of about 5000m in the Chilean Atacama desert. The primary challenge to the development of the software architecture is the fact that both its development and runtime environments will be distributed. Groups at different institutes will develop the key elements such as Proposal Preparation tools, Instrument operation, On-line calibration and reduction, and Archiving. The Proposal Preparation software will be used primarily at scientists' home institutions (or on their laptops), while Instrument Operations will execute on a set of networked computers at the ALMA Operations Support Facility. The ALMA Science Archive, itself to be replicated at several sites, will serve astronomers worldwide. Building upon the existing ALMA Common Software (ACS), the system architects will prepare a robust framework that will use XML-encoded entity objects to provide an effective solution to the persistence needs of this system, while remaining largely independent of any underlying DBMS technology. Independence of distributed subsystems will be facilitated by an XML- and CORBA-based pass-by-value mechanism for exchange of objects. Proof of concept (as well as a guide to subsystem developers) will come from a prototype whose details will be presented.

Software Tools For Large Scale Interactive Hydrodynamic Modeling

NARCIS (Netherlands)

Donchyts, G.; Baart, F.; van Dam, A; Jagers, B; van der Pijl, S.; Piasecki, M.

2014-01-01

Developing easy-to-use software that combines components for simultaneous visualization, simulation and interaction is a great challenge. Mainly, because it involves a number of disciplines, like computational fluid dynamics, computer graphics, high-performance computing. One of the main

Impact of Base Functional Component Types on Software Functional Size based Effort Estimation

OpenAIRE

Gencel, Cigdem; Buglione, Luigi

2008-01-01

Software effort estimation is still a significant challenge for software management. Although Functional Size Measurement (FSM) methods have been standardized and have become widely used by the software organizations, the relationship between functional size and development effort still needs further investigation. Most of the studies focus on the project cost drivers and consider total software functional size as the primary input to estimation models. In this study, we investigate whether u...

Proceedings of the 19th Annual Software Engineering Workshop

Science.gov (United States)

1994-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of applications software. The goals of the SEL are: (1) to understand the software development process in the GSFC environment; (2) to measure the effects of various methodologies, tools, and models on this process; and (3) to identify and then to apply successful development practices. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that include this document.

Software Performs Complex Design Analysis

Science.gov (United States)

2008-01-01

Designers use computational fluid dynamics (CFD) to gain greater understanding of the fluid flow phenomena involved in components being designed. They also use finite element analysis (FEA) as a tool to help gain greater understanding of the structural response of components to loads, stresses and strains, and the prediction of failure modes. Automated CFD and FEA engineering design has centered on shape optimization, which has been hindered by two major problems: 1) inadequate shape parameterization algorithms, and 2) inadequate algorithms for CFD and FEA grid modification. Working with software engineers at Stennis Space Center, a NASA commercial partner, Optimal Solutions Software LLC, was able to utilize its revolutionary, one-of-a-kind arbitrary shape deformation (ASD) capability-a major advancement in solving these two aforementioned problems-to optimize the shapes of complex pipe components that transport highly sensitive fluids. The ASD technology solves the problem of inadequate shape parameterization algorithms by allowing the CFD designers to freely create their own shape parameters, therefore eliminating the restriction of only being able to use the computer-aided design (CAD) parameters. The problem of inadequate algorithms for CFD grid modification is solved by the fact that the new software performs a smooth volumetric deformation. This eliminates the extremely costly process of having to remesh the grid for every shape change desired. The program can perform a design change in a markedly reduced amount of time, a process that would traditionally involve the designer returning to the CAD model to reshape and then remesh the shapes, something that has been known to take hours, days-even weeks or months-depending upon the size of the model.

Performance testing of 3D point cloud software

Science.gov (United States)

Varela-González, M.; González-Jorge, H.; Riveiro, B.; Arias, P.

2013-10-01

LiDAR systems are being used widely in recent years for many applications in the engineering field: civil engineering, cultural heritage, mining, industry and environmental engineering. One of the most important limitations of this technology is the large computational requirements involved in data processing, especially for large mobile LiDAR datasets. Several software solutions for data managing are available in the market, including open source suites, however, users often unknown methodologies to verify their performance properly. In this work a methodology for LiDAR software performance testing is presented and four different suites are studied: QT Modeler, VR Mesh, AutoCAD 3D Civil and the Point Cloud Library running in software developed at the University of Vigo (SITEGI). The software based on the Point Cloud Library shows better results in the loading time of the point clouds and CPU usage. However, it is not as strong as commercial suites in working set and commit size tests.

Performance testing of 3D point cloud software

Directory of Open Access Journals (Sweden)

M. Varela-González

2013-10-01

Full Text Available LiDAR systems are being used widely in recent years for many applications in the engineering field: civil engineering, cultural heritage, mining, industry and environmental engineering. One of the most important limitations of this technology is the large computational requirements involved in data processing, especially for large mobile LiDAR datasets. Several software solutions for data managing are available in the market, including open source suites, however, users often unknown methodologies to verify their performance properly. In this work a methodology for LiDAR software performance testing is presented and four different suites are studied: QT Modeler, VR Mesh, AutoCAD 3D Civil and the Point Cloud Library running in software developed at the University of Vigo (SITEGI. The software based on the Point Cloud Library shows better results in the loading time of the point clouds and CPU usage. However, it is not as strong as commercial suites in working set and commit size tests.

Application of industry-standard guidelines for the validation of avionics software

Science.gov (United States)

Hayhurst, Kelly J.; Shagnea, Anita M.

1990-01-01

The application of industry standards to the development of avionics software is discussed, focusing on verification and validation activities. It is pointed out that the procedures that guide the avionics software development and testing process are under increased scrutiny. The DO-178A guidelines, Software Considerations in Airborne Systems and Equipment Certification, are used by the FAA for certifying avionics software. To investigate the effectiveness of the DO-178A guidelines for improving the quality of avionics software, guidance and control software (GCS) is being developed according to the DO-178A development method. It is noted that, due to the extent of the data collection and configuration management procedures, any phase in the life cycle of a GCS implementation can be reconstructed. Hence, a fundamental development and testing platform has been established that is suitable for investigating the adequacy of various software development processes. In particular, the overall effectiveness and efficiency of the development method recommended by the DO-178A guidelines are being closely examined.

Space Flight Software Development Software for Intelligent System Health Management

Science.gov (United States)

Trevino, Luis C.; Crumbley, Tim

2004-01-01

The slide presentation examines the Marshall Space Flight Center Flight Software Branch, including software development projects, mission critical space flight software development, software technical insight, advanced software development technologies, and continuous improvement in the software development processes and methods.

Performance testing of LiDAR exploitation software

Science.gov (United States)

Varela-González, M.; González-Jorge, H.; Riveiro, B.; Arias, P.

2013-04-01

Mobile LiDAR systems are being used widely in recent years for many applications in the field of geoscience. One of most important limitations of this technology is the large computational requirements involved in data processing. Several software solutions for data processing are available in the market, but users are often unknown about the methodologies to verify their performance accurately. In this work a methodology for LiDAR software performance testing is presented and six different suites are studied: QT Modeler, AutoCAD Civil 3D, Mars 7, Fledermaus, Carlson and TopoDOT (all of them in x64). Results depict as QTModeler, TopoDOT and AutoCAD Civil 3D allow the loading of large datasets, while Fledermaus, Mars7 and Carlson do not achieve these powerful performance. AutoCAD Civil 3D needs large loading time in comparison with the most powerful softwares such as QTModeler and TopoDOT. Carlson suite depicts the poorest results among all the softwares under study, where point clouds larger than 5 million points cannot be loaded and loading time is very large in comparison with the other suites even for the smaller datasets. AutoCAD Civil 3D, Carlson and TopoDOT show more threads than other softwares like QTModeler, Mars7 and Fledermaus.

Cassini's Test Methodology for Flight Software Verification and Operations

Science.gov (United States)

Wang, Eric; Brown, Jay

2007-01-01

The Cassini spacecraft was launched on 15 October 1997 on a Titan IV-B launch vehicle. The spacecraft is comprised of various subsystems, including the Attitude and Articulation Control Subsystem (AACS). The AACS Flight Software (FSW) and its development has been an ongoing effort, from the design, development and finally operations. As planned, major modifications to certain FSW functions were designed, tested, verified and uploaded during the cruise phase of the mission. Each flight software upload involved extensive verification testing. A standardized FSW testing methodology was used to verify the integrity of the flight software. This paper summarizes the flight software testing methodology used for verifying FSW from pre-launch through the prime mission, with an emphasis on flight experience testing during the first 2.5 years of the prime mission (July 2004 through January 2007).

Technical investigation of a pyrophoric event involving corrosion products from HEU ZPPR fuel plates

International Nuclear Information System (INIS)

Totemeier, T. C.

2000-01-01

A pyrophoric event recently occurred which involved corrosion products collected from highly-enriched uranium (HEU) fuel plates used in the Zero Power Physics Reactor (ZPPR). This paper summarizes the event and its background, and presents the results of an investigation into its source and mechanism. The investigation focused on characterization of corrosion product samples similar to those involved in the event using thermo-gravimetric analysis (TGA). Burning curve TGA tests were performed to measure the ignition temperature and hydride fractions of corrosion products in several different conditions to assess the effects of passivation treatment and long-term storage on chemical reactivity. The hydride fraction and ignition temperature of the corrosion products were found to be strongly dependent on the corrosion extent of the source metal. The results indicate that the energy source for the event was a considerable quantity of uranium hydride present in the corrosion products, but the specific ignition mechanism could not be identified

Report of Investigation Committee on Programs for Research and Development of Strategic Software for Advanced Computing; Kodo computing yo senryakuteki software no kenkyu kaihatsu program kento iinkai hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-12-26

The committee met on December 26, 2000, with 32 people in attendance. Discussion was made on the results of surveys conducted for the development of strategic software for advanced computing and on candidate projects for strategic software development. Taken up at the meeting were eight subjects which were the interim report on the survey results, semiconductor TCAD (technology computer-aided design) system, nanodevice surface analysis system, network distribution parallel processing platform (tentative name), fatigue simulation system, chemical reaction simulator, protein structure analysis system, and a next-generation fluid analysis system. In this report, the author uses his own way in arranging the discussion results into the four categories of (1) a strategic software development system, (2) popularization method and maintenance system, (3) handling of the results, and (4) the evaluation of the program for research and development. In relation to category (1), it is stated that the software grows up with the passage of time, that the software is a commercial program, and that in the development of a commercial software program the process of basic study up to the preparation of a prototype should be completely separated from the process for its completion. (NEDO)

Investigation of the accuracy of MV radiation isocentre calculations in the Elekta cone-beam CT software XVI

DEFF Research Database (Denmark)

Zimmermann, S. J.; Rowshanfarzad, P.; Ebert, M. A.

2015-01-01

) and the radiation field centre (RFC) is calculated. A software package was developed for accurate calculation of the linac isocentre position. This requires precise determination of the position of the ball bearing and the RFC. Results: Data were acquired for 6 MV, 18 MV and flattening filter free (FFF) 6 MV FFF...... radiation isocentre prior to routine use of the cone-beam CT system. The isocentre determination method used in the XVI software is not available to users. The aim of this work is to perform an independent evaluation of the Elekta XVI 4.5 software for isocentre verification with focus on the robustness...... iView GT software. Two images were acquired at each cardinal gantry angle (-180o, -90o , 0o, 90o) at two opposing collimator angles. The images were exported to the conebeam CT software XVI 4.5 where the difference between the ball bearing position in the XYZ-room coordinates (IEC61217...

Proceedings of the Fifteenth Annual Software Engineering Workshop

Science.gov (United States)

1990-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by GSFC and created for the purpose of investigating the effectiveness of software engineering technologies when applied to the development of applications software. The goals of the SEL are: (1) to understand the software development process in the GSFC environment; (2) to measure the effect of various methodologies, tools, and models on this process; and (3) to identify and then to apply successful development practices. Fifteen papers were presented at the Fifteenth Annual Software Engineering Workshop in five sessions: (1) SEL at age fifteen; (2) process improvement; (3) measurement; (4) reuse; and (5) process assessment. The sessions were followed by two panel discussions: (1) experiences in implementing an effective measurement program; and (2) software engineering in the 1980's. A summary of the presentations and panel discussions is given.

Software cost/resource modeling: Software quality tradeoff measurement

Science.gov (United States)

Lawler, R. W.

1980-01-01

A conceptual framework for treating software quality from a total system perspective is developed. Examples are given to show how system quality objectives may be allocated to hardware and software; to illustrate trades among quality factors, both hardware and software, to achieve system performance objectives; and to illustrate the impact of certain design choices on software functionality.

What Really Happens to Complimentary Textbook Software? A Case Study in Software Utilization.

Science.gov (United States)

Vernon, Robert F.

1993-01-01

Discussion of complimentary computer software for college-level textbooks focuses on a study that investigated how a complimentary program was used and identified factors that influenced its use or nonuse. Barriers to use are described, including personal, technical, process, political, and economic factors. (Contains four references.) (LRW)

The need for scientific software engineering in the pharmaceutical industry.

Science.gov (United States)

Luty, Brock; Rose, Peter W

2017-03-01

Scientific software engineering is a distinct discipline from both computational chemistry project support and research informatics. A scientific software engineer not only has a deep understanding of the science of drug discovery but also the desire, skills and time to apply good software engineering practices. A good team of scientific software engineers can create a software foundation that is maintainable, validated and robust. If done correctly, this foundation enable the organization to investigate new and novel computational ideas with a very high level of efficiency.

The need for scientific software engineering in the pharmaceutical industry

Science.gov (United States)

Luty, Brock; Rose, Peter W.

2017-03-01

Scientific software engineering is a distinct discipline from both computational chemistry project support and research informatics. A scientific software engineer not only has a deep understanding of the science of drug discovery but also the desire, skills and time to apply good software engineering practices. A good team of scientific software engineers can create a software foundation that is maintainable, validated and robust. If done correctly, this foundation enable the organization to investigate new and novel computational ideas with a very high level of efficiency.

Introducing a New Software for Geodetic Analysis

Science.gov (United States)

Hjelle, Geir Arne; Dähnn, Michael; Fausk, Ingrid; Kirkvik, Ann-Silje; Mysen, Eirik

2017-04-01

At the Norwegian Mapping Authority, we are currently developing Where, a new software for geodetic analysis. Where is built on our experiences with the Geosat software, and will be able to analyse and combine data from VLBI, SLR, GNSS and DORIS. The software is mainly written in Python which has proved very fruitful. The code is quick to write and the architecture is easily extendable and maintainable, while at the same time taking advantage of well-tested code like the SOFA and IERS libraries. This presentation will show some of the current capabilities of Where, including benchmarks against other software packages, and outline our plans for further progress. In addition we will report on some investigations we have done experimenting with alternative weighting strategies for VLBI.

Real-time scheduling of software tasks

International Nuclear Information System (INIS)

Hoff, L.T.

1995-01-01

When designing real-time systems, it is often desirable to schedule execution of software tasks based on the occurrence of events. The events may be clock ticks, interrupts from a hardware device, or software signals from other software tasks. If the nature of the events, is well understood, this scheduling is normally a static part of the system design. If the nature of the events is not completely understood, or is expected to change over time, it may be necessary to provide a mechanism for adjusting the scheduling of the software tasks. RHIC front-end computers (FECs) provide such a mechanism. The goals in designing this mechanism were to be as independent as possible of the underlying operating system, to allow for future expansion of the mechanism to handle new types of events, and to allow easy configuration. Some considerations which steered the design were programming paradigm (object oriented vs. procedural), programming language, and whether events are merely interesting moments in time, or whether they intrinsically have data associated with them. The design also needed to address performance and robustness tradeoffs involving shared task contexts, task priorities, and use of interrupt service routine (ISR) contexts vs. task contexts. This paper will explore these considerations and tradeoffs

Integrating and Managing Bim in GIS, Software Review

Science.gov (United States)

El Meouche, R.; Rezoug, M.; Hijazi, I.

2013-08-01

Since the advent of Computer-Aided Design (CAD) and Geographical Information System (GIS) tools, project participants have been increasingly leveraging these tools throughout the different phases of a civil infrastructure project. In recent years the number of GIS software that provides tools to enable the integration of Building information in geo context has risen sharply. More and more GIS software are added tools for this purposes and other software projects are regularly extending these tools. However, each software has its different strength and weakness and its purpose of use. This paper provides a thorough review to investigate the software capabilities and clarify its purpose. For this study, Autodesk Revit 2012 i.e. BIM editor software was used to create BIMs. In the first step, three building models were created, the resulted models were converted to BIM format and then the software was used to integrate it. For the evaluation of the software, general characteristics was studied such as the user interface, what formats are supported (import/export), and the way building information are imported.

Software system safety

Science.gov (United States)

Uber, James G.

1988-01-01

Software itself is not hazardous, but since software and hardware share common interfaces there is an opportunity for software to create hazards. Further, these software systems are complex, and proven methods for the design, analysis, and measurement of software safety are not yet available. Some past software failures, future NASA software trends, software engineering methods, and tools and techniques for various software safety analyses are reviewed. Recommendations to NASA are made based on this review.

Design and implementation of embedded Bluetooth software system

Science.gov (United States)

Zhou, Zhijian; Zhou, Shujie; Xu, Huimin

2001-10-01

This thesis introduces the background knowledge and characteristics of Bluetooth technology. Then it summarizes the architecture and working principle of Bluetooth software. After carefully studying the characteristics of embedded operating system and Bluetooth software, this thesis declared two sets of module about Bluetooth software. Corresponding to these module's characteristics, this thesis introduces the design and implementation of LAN Access and Bluetooth headset. The Headset part introduces a developing method corresponding to the particularity of Bluetooth control software. Although these control software are application entity, the control signaling exchanged between them are regulations according to former definitions and they functions through the interaction of data and control information. These data and control information construct the protocol data unit (PDU), and the former definition can be seen as protocol in fact. This thesis uses the advanced development flow on communication protocol development as reference, a formal method - SDL (Specification and Description Language) - describing, validating and coding manually to C. This method not only reserved the efficiency of manually coded code, but also it ensures the quality of codes. The introduction also involves finite state machine theory while introduces the practical developing method on protocol development with the aid of SDL.

Avoidable Software Procurements

Science.gov (United States)

2012-09-01

software license, software usage, ELA, Software as a Service , SaaS , Software Asset...PaaS Platform as a Service SaaS Software as a Service SAM Software Asset Management SMS System Management Server SEWP Solutions for Enterprise Wide...delivery of full Cloud Services , we will see the transition of the Cloud Computing service model from Iaas to SaaS , or Software as a Service . Software

Applying open innovation in business strategies : Evidence from Finnish software firms

NARCIS (Netherlands)

Harison, Elad; Koski, Heli

Our study aims at shedding light on the innovative business strategies in the software sector and understanding better the economics that underlies the supply of Open Source Software (OSS). We use survey data collected from 170 Finnish software companies to investigate how different properties of

The art of software modeling

CERN Document Server

Lieberman, Benjamin A

2007-01-01

Modeling complex systems is a difficult challenge and all too often one in which modelers are left to their own devices. Using a multidisciplinary approach, The Art of Software Modeling covers theory, practice, and presentation in detail. It focuses on the importance of model creation and demonstrates how to create meaningful models. Presenting three self-contained sections, the text examines the background of modeling and frameworks for organizing information. It identifies techniques for researching and capturing client and system information and addresses the challenges of presenting models to specific audiences. Using concepts from art theory and aesthetics, this broad-based approach encompasses software practices, cognitive science, and information presentation. The book also looks at perception and cognition of diagrams, view composition, color theory, and presentation techniques. Providing practical methods for investigating and organizing complex information, The Art of Software Modeling demonstrate...

Evaluating Open Source Software for Use in Library Initiatives: A Case Study Involving Electronic Publishing

Science.gov (United States)

Samuels, Ruth Gallegos; Griffy, Henry

2012-01-01

This article discusses best practices for evaluating open source software for use in library projects, based on the authors' experience evaluating electronic publishing solutions. First, it presents a brief review of the literature, emphasizing the need to evaluate open source solutions carefully in order to minimize Total Cost of Ownership. Next,…

Product derivation in software product families : a case study

NARCIS (Netherlands)

Deelstra, S; Sinnema, M; Bosch, J

2005-01-01

From our experience with several organizations that employ software product families, we have learned that, contrary to popular belief, deriving individual products from shared software assets is a time-consuming and expensive activity. In this paper we therefore present a study that investigated

Empirical analysis of change metrics for software fault prediction

NARCIS (Netherlands)

Choudhary, Garvit Rajesh; Kumar, Sandeep; Kumar, Kuldeep; Mishra, Alok; Catal, Cagatay

2018-01-01

A quality assurance activity, known as software fault prediction, can reduce development costs and improve software quality. The objective of this study is to investigate change metrics in conjunction with code metrics to improve the performance of fault prediction models. Experimental studies are

Factors related to food involvement in the adult population

Directory of Open Access Journals (Sweden)

Bárbara de ALENCAR

2016-06-01

Full Text Available ABSTRACT Objective This study aimed to investigate aspects associated with food involvement and to ascertain whether individuals with higher food involvement consume larger amounts of fruits and vegetables. Methods This cross-sectional, analytical study was conducted with 301 adults (19-59 years old from the Federal District, Brazil. Sample size calculation was based on numbers from the Brazilian Demographic Census and on consumption data for fruits and vegetables obtained from the Surveillance of Risk and Protective Factors for Chronic Diseases by Telephone Interviews survey. Data were collected in October of 2012. The questionnaire comprised 28 questions and included socio-demographic variables, reported fruit and vegetable consumption, and an adapted food involvement scale. Data were analyzed using Statistical Package for the Social Sciences software. Descriptive and comparative analyses were performed to determine population characteristics . Results Women and older individuals displayed a higher degree of food involvement than did men and younger individuals ( p <0.001. Among the factors included in food involvement, the highest influence was attributed to satisfaction in preparing food (cooking, pre-preparation of food, and pleasure in cooking for other people ( p <0.001. Conclusion The results presented here suggest that food involvement can be stimulated through innovative strategies of communication that go beyond the biological arguments and focus on the cultural expression of the elements of socialization, whose relationship with eating is well established.

Software engineering

CERN Document Server

Sommerville, Ian

2010-01-01

The ninth edition of Software Engineering presents a broad perspective of software engineering, focusing on the processes and techniques fundamental to the creation of reliable, software systems. Increased coverage of agile methods and software reuse, along with coverage of 'traditional' plan-driven software engineering, gives readers the most up-to-date view of the field currently available. Practical case studies, a full set of easy-to-access supplements, and extensive web resources make teaching the course easier than ever.

Testing existing software for safety-related applications. Revision 7.1

International Nuclear Information System (INIS)

Scott, J.A.; Lawrence, J.D.

1995-12-01

The increasing use of commercial off-the-shelf (COTS) software products in digital safety-critical applications is raising concerns about the safety, reliability, and quality of these products. One of the factors involved in addressing these concerns is product testing. A tester's knowledge of the software product will vary, depending on the information available from the product vendor. In some cases, complete source listings, program structures, and other information from the software development may be available. In other cases, only the complete hardware/software package may exist, with the tester having no knowledge of the internal structure of the software. The type of testing that can be used will depend on the information available to the tester. This report describes six different types of testing, which differ in the information used to create the tests, the results that may be obtained, and the limitations of the test types. An Annex contains background information on types of faults encountered in testing, and a Glossary of pertinent terms is also included. This study is pertinent for safety-related software at reactors

Free software, Open source software, licenses. A short presentation including a procedure for research software and data dissemination

OpenAIRE

Gomez-Diaz , Teresa

2014-01-01

4 pages. Spanish version: Software libre, software de código abierto, licencias. Donde se propone un procedimiento de distribución de software y datos de investigación; The main goal of this document is to help the research community to understand the basic concepts of software distribution: Free software, Open source software, licenses. This document also includes a procedure for research software and data dissemination.

Programming for the Newton software development with NewtonScript

CERN Document Server

McKeehan, Julie

1994-01-01

Programming for the Newton: Software Development with NewtonScript focuses on the processes, approaches, operations, and principles involved in software development with NewtonScript.The publication first elaborates on Newton application design, views on the Newton, and protos. Discussions focus on system protos, creating and using user protos, linking and naming templates, creating the views of WaiterHelper, Newton application designs, and life cycle of an application. The text then elaborates on the fundamentals of NewtonScript, inheritance in NewtonScript, and view system and messages. Topi

Korean WA-DGNSS User Segment Software Design

Directory of Open Access Journals (Sweden)

Sayed Chhattan Shah

2013-03-01

Full Text Available Korean WA-DGNSS is a large scale research project funded by Ministry of Land, Transport and Maritime Affairs Korea. It aims to augment the Global Navigation Satellite System by broadcasting additional signals from geostationary satellites and providing differential correction messages and integrity data for the GNSS satellites. The project is being carried out by a consortium of universities and research institutes. The research team at Electronics and Telecommunications Research Institute is involved in design and development of data processing softwares for wide area reference station and user segment. This paper focuses on user segment software design. Korean WA-DGNSS user segment software is designed to perform several functions such as calculation of pseudorange, ionosphere and troposphere delays, application of fast and slow correction messages, and data verification. It is based on a layered architecture that provides a model to develop flexible and reusable software and is divided into several independent, interchangeable and reusable components to reduce complexity and maintenance cost. The current version is designed to collect and process GPS and WA-DGNSS data however it is flexible to accommodate future GNSS systems such as GLONASS and Galileo.

Problems in Systematic Application of Software Metrics and Possible Solution

OpenAIRE

Rakic, Gordana; Budimac, Zoran

2013-01-01

Systematic application of software metric techniques can lead to significant improvements of the quality of a final software product. However, there is still the evident lack of wider utilization of software metrics techniques and tools due to many reasons. In this paper we investigate some limitations of contemporary software metrics tools and then propose construction of a new tool that would solve some of the problems. We describe the promising prototype, its internal structure, and then f...

A new entropy based method for computing software structural complexity

CERN Document Server

Roca, J L

2002-01-01

In this paper a new methodology for the evaluation of software structural complexity is described. It is based on the entropy evaluation of the random uniform response function associated with the so called software characteristic function SCF. The behavior of the SCF with the different software structures and their relationship with the number of inherent errors is investigated. It is also investigated how the entropy concept can be used to evaluate the complexity of a software structure considering the SCF as a canonical representation of the graph associated with the control flow diagram. The functions, parameters and algorithms that allow to carry out this evaluation are also introduced. After this analytic phase follows the experimental phase, verifying the consistency of the proposed metric and their boundary conditions. The conclusion is that the degree of software structural complexity can be measured as the entropy of the random uniform response function of the SCF. That entropy is in direct relation...

Strategies employed for LHC software performance studies

CERN Document Server

Nowak, A

2010-01-01

The objective of this work is to collect and assess the software performance related strategies employed by the major players in the LHC software arena: the four main experiments (ALICE, ATLAS, CMS and LHCb) and the two main software frameworks (Geant4 and ROOT). As the software used differs between the parties, so do the directions and methods in optimization, and their intensity. The common feeling shared by nearly all interviewed parties is that performance is not one of their top priorities and that maintaining it at a constant level is a satisfactory solution, given the resources at hand. In principle, despite some organized efforts, a less structured approach seems to be the dominant one, and opportunistic optimization prevails. Four out of six surveyed groups are investigating memory management related effects, deemed to be the primary cause of their performance issues. The most commonly used tools include Valgrind and homegrown software. All questioned groups expressed the desire for advanced tools, s...

Dynamic visualization techniques for high consequence software

Energy Technology Data Exchange (ETDEWEB)

Pollock, G.M.

1998-02-01

This report documents a prototype tool developed to investigate the use of visualization and virtual reality technologies for improving software surety confidence. The tool is utilized within the execution phase of the software life cycle. It provides a capability to monitor an executing program against prespecified requirements constraints provided in a program written in the requirements specification language SAGE. The resulting Software Attribute Visual Analysis Tool (SAVAnT) also provides a technique to assess the completeness of a software specification. The prototype tool is described along with the requirements constraint language after a brief literature review is presented. Examples of how the tool can be used are also presented. In conclusion, the most significant advantage of this tool is to provide a first step in evaluating specification completeness, and to provide a more productive method for program comprehension and debugging. The expected payoff is increased software surety confidence, increased program comprehension, and reduced development and debugging time.

A handbook of software and systems engineering empirical observations, laws and theories

CERN Document Server

Endres, Albert

2003-01-01

This book is intended as a handbook for students and practitioners alike. The book is structured around the type of tasks that practitioners are confronted with, beginning with requirements definition and concluding with maintenance and withdrawal. It identifies and discusses existing laws that have a significant impact on the software engineering field. These laws are largely independent of the technologies involved, which allow students to learn the principles underlying software engineering. This also guides students toward the best practice when implementing software engineering techniques.

Managing Risk Areas in Software Development Offshoring: A CMMI Level 5 Case

DEFF Research Database (Denmark)

Persson, John Stouby; Schlichter, Bjarne Rerup

2015-01-01

Software companies are increasingly offshoring development to countries with high expertise at lower cost. Offshoring involves particular risk areas that if ignored increase the likelihood of failure. However, the offshoring client’s maturity level may influence the management of these risk areas....... Against this backdrop, we present an interpretive case study of how managers perceive and mitigate the risk areas in software development offshoring with a mature CMMI level 5 (Capability Maturity Model, Integrated) software company as the client. We find that managers perceive and mitigate most...

Software Organization in Student Data Banks for Research and Evaluation: Four Institutional Models.

Science.gov (United States)

Friedman, Charles P.

Student data banks for ongoing research and evaluation have been implemented by a number of professional schools. Institutions selecting software designs for the establishment of such systems are often faced with making their choice before all the possible uses of the system are determined. Making software design decisions involves "rational"…

Nurturing reliable and robust open-source scientific software

Science.gov (United States)

Uieda, L.; Wessel, P.

2017-12-01

Scientific results are increasingly the product of software. The reproducibility and validity of published results cannot be ensured without access to the source code of the software used to produce them. Therefore, the code itself is a fundamental part of the methodology and must be published along with the results. With such a reliance on software, it is troubling that most scientists do not receive formal training in software development. Tools such as version control, continuous integration, and automated testing are routinely used in industry to ensure the correctness and robustness of software. However, many scientist do not even know of their existence (although efforts like Software Carpentry are having an impact on this issue; software-carpentry.org). Publishing the source code is only the first step in creating an open-source project. For a project to grow it must provide documentation, participation guidelines, and a welcoming environment for new contributors. Expanding the project community is often more challenging than the technical aspects of software development. Maintainers must invest time to enforce the rules of the project and to onboard new members, which can be difficult to justify in the context of the "publish or perish" mentality. This problem will continue as long as software contributions are not recognized as valid scholarship by hiring and tenure committees. Furthermore, there are still unsolved problems in providing attribution for software contributions. Many journals and metrics of academic productivity do not recognize citations to sources other than traditional publications. Thus, some authors choose to publish an article about the software and use it as a citation marker. One issue with this approach is that updating the reference to include new contributors involves writing and publishing a new article. A better approach would be to cite a permanent archive of individual versions of the source code in services such as Zenodo

Impact of Agile Software Development Model on Software Maintainability

Science.gov (United States)

Gawali, Ajay R.

2012-01-01

Software maintenance and support costs account for up to 60% of the overall software life cycle cost and often burdens tightly budgeted information technology (IT) organizations. Agile software development approach delivers business value early, but implications on software maintainability are still unknown. The purpose of this quantitative study…

Integration of Simulink Models with Component-based Software Models

DEFF Research Database (Denmark)

Marian, Nicolae

2008-01-01

Model based development aims to facilitate the development of embedded control systems by emphasizing the separation of the design level from the implementation level. Model based design involves the use of multiple models that represent different views of a system, having different semantics...... of abstract system descriptions. Usually, in mechatronics systems, design proceeds by iterating model construction, model analysis, and model transformation. Constructing a MATLAB/Simulink model, a plant and controller behavior is simulated using graphical blocks to represent mathematical and logical...... constraints. COMDES (Component-based Design of Software for Distributed Embedded Systems) is such a component-based system framework developed by the software engineering group of Mads Clausen Institute for Product Innovation (MCI), University of Southern Denmark. Once specified, the software model has...

75 FR 74081 - In the Matter of Certain Mobile Devices and Related Software; Notice of Investigation

Science.gov (United States)

2010-11-30

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-750] In the Matter of Certain Mobile Devices and... certain mobile devices and related software by reason of infringement of certain claims of U.S. Patent No... mobile devices and related software that infringe one or more of claims 1, 2, 10, 11, 24-26 and 29 of the...

Use of chemistry software to teach and assess model-based reaction and equation knowledge

Directory of Open Access Journals (Sweden)

Kevin Pyatt

2014-12-01

Full Text Available This study investigated the challenges students face when learning chemical reactions in a first-year chemistry course and the effectiveness of a curriculum and software implementation that was used to teach and assess student understanding of chemical reactions and equations. This study took place over a two year period in a public suburban high-school, in southwestern USA. Two advanced placement (AP chemistry classes participated, referred to here as study group A (year 1, N = 14; and study group B (year 2, N = 21. The curriculum for a first-year chemistry course (group A was revised to include instruction on reaction-types. The second year of the study involved the creation and implementation of a software solution which promoted mastery learning of reaction-types. Students in both groups benefited from the reaction-type curriculum and achieved proficiency in chemical reactions and equations.  The findings suggest there was an added learning benefit to using the reaction-type software solution. This study also found that reaction knowledge was a moderate to strong predictor of chemistry achievement. Based on regression analysis, reaction knowledge significantly predicted chemistry achievement for both groups.

Investigations on development of software and hardware for nuclear power plant training simulators

International Nuclear Information System (INIS)

He Sian.

1987-01-01

The requirements of a training simulator are discussed. The algorithms of the lumped and distributed parameter system and real time system are analysed on principle in software design. The assumed schemes of a hardware system are proposed, too

NASA Software Engineering Benchmarking Study

Science.gov (United States)

Rarick, Heather L.; Godfrey, Sara H.; Kelly, John C.; Crumbley, Robert T.; Wifl, Joel M.

2013-01-01

To identify best practices for the improvement of software engineering on projects, NASA's Offices of Chief Engineer (OCE) and Safety and Mission Assurance (OSMA) formed a team led by Heather Rarick and Sally Godfrey to conduct this benchmarking study. The primary goals of the study are to identify best practices that: Improve the management and technical development of software intensive systems; Have a track record of successful deployment by aerospace industries, universities [including research and development (R&D) laboratories], and defense services, as well as NASA's own component Centers; and Identify candidate solutions for NASA's software issues. Beginning in the late fall of 2010, focus topics were chosen and interview questions were developed, based on the NASA top software challenges. Between February 2011 and November 2011, the Benchmark Team interviewed a total of 18 organizations, consisting of five NASA Centers, five industry organizations, four defense services organizations, and four university or university R and D laboratory organizations. A software assurance representative also participated in each of the interviews to focus on assurance and software safety best practices. Interviewees provided a wealth of information on each topic area that included: software policy, software acquisition, software assurance, testing, training, maintaining rigor in small projects, metrics, and use of the Capability Maturity Model Integration (CMMI) framework, as well as a number of special topics that came up in the discussions. NASA's software engineering practices compared favorably with the external organizations in most benchmark areas, but in every topic, there were ways in which NASA could improve its practices. Compared to defense services organizations and some of the industry organizations, one of NASA's notable weaknesses involved communication with contractors regarding its policies and requirements for acquired software. One of NASA's strengths

Software reliability

CERN Document Server

Bendell, A

1986-01-01

Software Reliability reviews some fundamental issues of software reliability as well as the techniques, models, and metrics used to predict the reliability of software. Topics covered include fault avoidance, fault removal, and fault tolerance, along with statistical methods for the objective assessment of predictive accuracy. Development cost models and life-cycle cost models are also discussed. This book is divided into eight sections and begins with a chapter on adaptive modeling used to predict software reliability, followed by a discussion on failure rate in software reliability growth mo

Features of commercial computer software systems for medical examiners and coroners.

Science.gov (United States)

Hanzlick, R L; Parrish, R G; Ing, R

1993-12-01

There are many ways of automating medical examiner and coroner offices, one of which is to purchase commercial software products specifically designed for death investigation. We surveyed four companies that offer such products and requested information regarding each company and its hardware, software, operating systems, peripheral devices, applications, networking options, programming language, querying capability, coding systems, prices, customer support, and number and size of offices using the product. Although the four products (CME2, ForenCIS, InQuest, and Medical Examiner's Software System) are similar in many respects and each can be installed on personal computers, there are differences among the products with regard to cost, applications, and the other features. Death investigators interested in office automation should explore these products to determine the usefulness of each in comparison with the others and in comparison with general-purpose, off-the-shelf databases and software adaptable to death investigation needs.

Software Epistemology

Science.gov (United States)

2016-03-01

in-vitro decision to incubate a startup, Lexumo [7], which is developing a commercial Software as a Service ( SaaS ) vulnerability assessment...LTS Label Transition System MUSE Mining and Understanding Software Enclaves RTEMS Real-Time Executive for Multi-processor Systems SaaS Software ...as a Service SSA Static Single Assignment SWE Software Epistemology UD/DU Def-Use/Use-Def Chains (Dataflow Graph)

Computer software.

Science.gov (United States)

Rosenthal, L E

1986-10-01

Software is the component in a computer system that permits the hardware to perform the various functions that a computer system is capable of doing. The history of software and its development can be traced to the early nineteenth century. All computer systems are designed to utilize the "stored program concept" as first developed by Charles Babbage in the 1850s. The concept was lost until the mid-1940s, when modern computers made their appearance. Today, because of the complex and myriad tasks that a computer system can perform, there has been a differentiation of types of software. There is software designed to perform specific business applications. There is software that controls the overall operation of a computer system. And there is software that is designed to carry out specialized tasks. Regardless of types, software is the most critical component of any computer system. Without it, all one has is a collection of circuits, transistors, and silicone chips.

Rules of thumb to increase the software quality through testing

Science.gov (United States)

Buttu, M.; Bartolini, M.; Migoni, C.; Orlati, A.; Poppi, S.; Righini, S.

2016-07-01

The software maintenance typically requires 40-80% of the overall project costs, and this considerable variability mostly depends on the software internal quality: the more the software is designed and implemented to constantly welcome new changes, the lower will be the maintenance costs. The internal quality is typically enforced through testing, which in turn also affects the development and maintenance costs. This is the reason why testing methodologies have become a major concern for any company that builds - or is involved in building - software. Although there is no testing approach that suits all contexts, we infer some general guidelines learned during the Development of the Italian Single-dish COntrol System (DISCOS), which is a project aimed at producing the control software for the three INAF radio telescopes (the Medicina and Noto dishes, and the newly-built SRT). These guidelines concern both the development and the maintenance phases, and their ultimate goal is to maximize the DISCOS software quality through a Behavior-Driven Development (BDD) workflow beside a continuous delivery pipeline. We consider different topics and patterns; they involve the proper apportion of the tests (from end-to-end to low-level tests), the choice between hardware simulators and mockers, why and how to apply TDD and the dependency injection to increase the test coverage, the emerging technologies available for test isolation, bug fixing, how to protect the system from the external resources changes (firmware updating, hardware substitution, etc.) and, eventually, how to accomplish BDD starting from functional tests and going through integration and unit tests. We discuss pros and cons of each solution and point out the motivations of our choices either as a general rule or narrowed in the context of the DISCOS project.

Simulation-based Testing of Control Software

Energy Technology Data Exchange (ETDEWEB)

Ozmen, Ozgur [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nutaro, James J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sanyal, Jibonananda [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Olama, Mohammed M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-02-10

It is impossible to adequately test complex software by examining its operation in a physical prototype of the system monitored. Adequate test coverage can require millions of test cases, and the cost of equipment prototypes combined with the real-time constraints of testing with them makes it infeasible to sample more than a small number of these tests. Model based testing seeks to avoid this problem by allowing for large numbers of relatively inexpensive virtual prototypes that operate in simulation time at a speed limited only by the available computing resources. In this report, we describe how a computer system emulator can be used as part of a model based testing environment; specifically, we show that a complete software stack including operating system and application software - can be deployed within a simulated environment, and that these simulations can proceed as fast as possible. To illustrate this approach to model based testing, we describe how it is being used to test several building control systems that act to coordinate air conditioning loads for the purpose of reducing peak demand. These tests involve the use of ADEVS (A Discrete Event System Simulator) and QEMU (Quick Emulator) to host the operational software within the simulation, and a building model developed with the MODELICA programming language using Buildings Library and packaged as an FMU (Functional Mock-up Unit) that serves as the virtual test environment.

Antenna Controller Replacement Software

Science.gov (United States)

Chao, Roger Y.; Morgan, Scott C.; Strain, Martha M.; Rockwell, Stephen T.; Shimizu, Kenneth J.; Tehrani, Barzia J.; Kwok, Jaclyn H.; Tuazon-Wong, Michelle; Valtier, Henry; Nalbandi, Reza;

inventory management, VMI, software agents, MDV model

Directory of Open Access Journals (Sweden)

Waldemar Wieczerzycki

2012-03-01

of work that in practice does not require the involvement of network users, the ability to use new communication channels, etc. Conclusions: The proposed MDV model significantly enriched the advantages of software agents, which was then practically illustrated by the proposal of their use for the VMI implementation.

Software engineering laboratory series: Annotated bibliography of software engineering laboratory literature

Science.gov (United States)

Morusiewicz, Linda; Valett, Jon

1992-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) the Software Engineering Laboratory; (2) the Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

Characterization of Morphology using MAMA Software

Energy Technology Data Exchange (ETDEWEB)

Gravelle, Julie [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-08-02

The MAMA (Morphological Analysis for Material Attribution) software was developed at the Los Alamos National Laboratory funded through the National Technical Nuclear Forensics Center in the Department of Homeland Security. The software allows images to be analysed and quantified. The largest project I worked on was to quantify images of plutonium oxides and ammonium diuranates prepared by the group with the software and provide analyses on the particles of each sample. Images were quantified through MAMA, with a color analysis, a lexicon description and powder x-ray diffraction. Through this we were able to visually see a difference between some of the syntheses. An additional project was to revise the manual for MAMA to help streamline training and provide useful tips to users to more quickly become acclimated to using the software. The third project investigated expanding the scope of MAMA and finding a statistically relevant baseline for the particulates through the analysis of maps in the software and using known measurements to compare the error associated with the software. During this internship, I worked on several different projects dealing with the MAMA software. The revision of the usermanual for the MAMA software was the first project I was able to work and collaborate on. I first learned how to use the software by getting instruction from a skilled user at the laboratory, Dan Schwartz, and by using the existing user manual and examples. After becoming accustomed to the program, I started to go over the manual to correct and change items that were not as useful or descriptive as they could have been. I also added in tips that I learned as I explored the software. The updated manual was also worked on by several others who have been developing the program. The goal of these revisions was to ensure the most concise and simple directions to the software were available to future users. By incorporating tricks and shortcuts that I discovered and picked up

Software Engineering Guidebook

Science.gov (United States)

Connell, John; Wenneson, Greg

1993-01-01

The Software Engineering Guidebook describes SEPG (Software Engineering Process Group) supported processes and techniques for engineering quality software in NASA environments. Three process models are supported: structured, object-oriented, and evolutionary rapid-prototyping. The guidebook covers software life-cycles, engineering, assurance, and configuration management. The guidebook is written for managers and engineers who manage, develop, enhance, and/or maintain software under the Computer Software Services Contract.

From Software Development to Software Assembly

NARCIS (Netherlands)

Sneed, Harry M.; Verhoef, Chris

2016-01-01

The lack of skilled programming personnel and the growing burden of maintaining customized software are forcing organizations to quit producing their own software. It's high time they turned to ready-made, standard components to fulfill their business requirements. Cloud services might be one way to

Innovation Initiatives in Large Software Companies

DEFF Research Database (Denmark)

Edison, Henry; Wang, Xiaofeng; Jabangwe, Ronald

2018-01-01

empirical studies on innovation initiative in the context of large software companies. A total of 7 studies are conducted in the context of large software companies, which reported 5 types of initiatives: intrapreneurship, bootlegging, internal venture, spin-off and crowdsourcing. Our study offers three......Context: To keep the competitive advantage and adapt to changes in the market and technology, companies need to innovate in an organised, purposeful and systematic manner. However, due to their size and complexity, large companies tend to focus on the structure in maintaining their business, which...... can potentially lower their agility to innovate. Objective:The aims of this study are to provide an overview of the current research on innovation initiatives and to identify the challenges of implementing those initiatives in the context of large software companies. Method: The investigation...

A Software Reuse Approach and Its Effect On Software Quality, An Empirical Study for The Software Industry

OpenAIRE

Mateen, Ahmed; Kausar, Samina; Sattar, Ahsan Raza

2017-01-01

Software reusability has become much interesting because of increased quality and reduce cost. A good process of software reuse leads to enhance the reliability, productivity, quality and the reduction of time and cost. Current reuse techniques focuses on the reuse of software artifact which grounded on anticipated functionality whereas, the non-functional (quality) aspect are also important. So, Software reusability used here to expand quality and productivity of software. It improves overal...

Software quality assurance: in large scale and complex software-intensive systems

NARCIS (Netherlands)

Mistrik, I.; Soley, R.; Ali, N.; Grundy, J.; Tekinerdogan, B.

2015-01-01

Software Quality Assurance in Large Scale and Complex Software-intensive Systems presents novel and high-quality research related approaches that relate the quality of software architecture to system requirements, system architecture and enterprise-architecture, or software testing. Modern software

Coordination Approaches for Complex Software Systems

NARCIS (Netherlands)

Bosse, T.; Hoogendoorn, M.; Treur, J.

2006-01-01

This document presents the results of a collaboration between the Vrije Universiteit Amsterdam, Department of Artificial Intelligence and Force Vision to investigate coordination approaches for complex software systems. The project was funded by Force Vision.

Great software debates

CERN Document Server

Davis, A

2004-01-01

The industry’s most outspoken and insightful critic explains how the software industry REALLY works. In Great Software Debates, Al Davis, shares what he has learned about the difference between the theory and the realities of business and encourages you to question and think about software engineering in ways that will help you succeed where others fail. In short, provocative essays, Davis fearlessly reveals the truth about process improvement, productivity, software quality, metrics, agile development, requirements documentation, modeling, software marketing and sales, empiricism, start-up financing, software research, requirements triage, software estimation, and entrepreneurship.

A process improvement model for software verification and validation

Science.gov (United States)

Callahan, John; Sabolish, George

1994-01-01

We describe ongoing work at the NASA Independent Verification and Validation (IV&V) Facility to establish a process improvement model for software verification and validation (V&V) organizations. This model, similar to those used by some software development organizations, uses measurement-based techniques to identify problem areas and introduce incremental improvements. We seek to replicate this model for organizations involved in V&V on large-scale software development projects such as EOS and space station. At the IV&V Facility, a university research group and V&V contractors are working together to collect metrics across projects in order to determine the effectiveness of V&V and improve its application. Since V&V processes are intimately tied to development processes, this paper also examines the repercussions for development organizations in large-scale efforts.

Computer-Aided Software Engineering - An approach to real-time software development

Science.gov (United States)

Walker, Carrie K.; Turkovich, John J.

1989-01-01

A new software engineering discipline is Computer-Aided Software Engineering (CASE), a technology aimed at automating the software development process. This paper explores the development of CASE technology, particularly in the area of real-time/scientific/engineering software, and a history of CASE is given. The proposed software development environment for the Advanced Launch System (ALS CASE) is described as an example of an advanced software development system for real-time/scientific/engineering (RT/SE) software. The Automated Programming Subsystem of ALS CASE automatically generates executable code and corresponding documentation from a suitably formatted specification of the software requirements. Software requirements are interactively specified in the form of engineering block diagrams. Several demonstrations of the Automated Programming Subsystem are discussed.

Object-oriented software design in semiautomatic building extraction

Science.gov (United States)

Guelch, Eberhard; Mueller, Hardo

1997-08-01

Developing a system for semiautomatic building acquisition is a complex process, that requires constant integration and updating of software modules and user interfaces. To facilitate these processes we apply an object-oriented design not only for the data but also for the software involved. We use the unified modeling language (UML) to describe the object-oriented modeling of the system in different levels of detail. We can distinguish between use cases from the users point of view, that represent a sequence of actions, yielding in an observable result and the use cases for the programmers, who can use the system as a class library to integrate the acquisition modules in their own software. The structure of the system is based on the model-view-controller (MVC) design pattern. An example from the integration of automated texture extraction for the visualization of results demonstrate the feasibility of this approach.

Changes in Transferable Knowledge Resulting from Study in a Graduate Software Engineering Curriculum

Science.gov (United States)

Bareiss, Ray; Sedano, Todd; Katz, Edward

2012-01-01

This paper presents the initial results of a study of the evolution of students' knowledge of software engineering from the beginning to the end of a master's degree curriculum in software engineering. Students were presented with a problem involving the initiation of a complex new project at the beginning of the program and again at the end of…

Model-Based Software Testing for Object-Oriented Software

Science.gov (United States)

Biju, Soly Mathew

2008-01-01

Model-based testing is one of the best solutions for testing object-oriented software. It has a better test coverage than other testing styles. Model-based testing takes into consideration behavioural aspects of a class, which are usually unchecked in other testing methods. An increase in the complexity of software has forced the software industry…

Software Atom: An approach towards software components structuring to improve reusability

Directory of Open Access Journals (Sweden)

Muhammad Hussain Mughal

2017-12-01

Full Text Available Diversity of application domain compelled to design sustainable classification scheme for significantly amassing software repository. The atomic reusable software components are articulated to improve the software component reusability in volatile industry.  Numerous approaches of software classification have been proposed over past decades. Each approach has some limitations related to coupling and cohesion. In this paper, we proposed a novel approach by constituting the software based on radical functionalities to improve software reusability. We analyze the element's semantics in Periodic Table used in chemistry to design our classification approach, and present this approach using tree-based classification to curtail software repository search space complexity and further refined based on semantic search techniques. We developed a Global unique Identifier (GUID for indexing the functions and related components. We have exploited the correlation between chemistry element and software elements to simulate one to one mapping between them. Our approach is inspired from sustainability chemical periodic table. We have proposed software periodic table (SPT representing atomic software components extracted from real application software. Based on SPT classified repository tree parsing & extraction to enable the user to program their software by customizing the ingredients of software requirements. The classified repository of software ingredients assist user to exploits their requirements to software engineer and enable requirement engineer to develop a rapid large-scale prototype with great essence. Furthermore, we would predict the usability of the categorized repository based on feedback of users.  The continuous evolution of that proposed repository will be fine-tuned based on utilization and SPT would be gradually optimized by ant colony optimization techniques. Succinctly would provoke automating the software development process.

Software feedback for monochromator tuning at UNICAT (abstract)

Science.gov (United States)

Jemian, Pete R.

2002-03-01

Automatic tuning of double-crystal monochromators presents an interesting challenge in software. The goal is to either maximize, or hold constant, the throughput of the monochromator. An additional goal of the software feedback is to disable itself when there is no beam and then, at the user's discretion, re-enable itself when the beam returns. These and other routine goals, such as adherence to limits of travel for positioners, are maintained by software controls. Many solutions exist to lock in and maintain a fixed throughput. Among these include a hardware solution involving a wave form generator, and a lock-in amplifier to autocorrelate the movement of a piezoelectric transducer (PZT) providing fine adjustment of the second crystal Bragg angle. This solution does not work when the positioner is a slow acting device such as a stepping motor. Proportional integral differential (PID) loops have been used to provide feedback through software but additional controls must be provided to maximize the monochromator throughput. Presented here is a software variation of the PID loop which meets the above goals. By using two floating point variables as inputs, representing the intensity of x rays measured before and after the monochromator, it attempts to maximize (or hold constant) the ratio of these two inputs by adjusting an output floating point variable. These floating point variables are connected to hardware channels corresponding to detectors and positioners. When the inputs go out of range, the software will stop making adjustments to the control output. Not limited to monochromator feedback, the software could be used, with beam steering positioners, to maintain a measure of beam position. Advantages of this software feedback are the flexibility of its various components. It has been used with stepping motors and PZTs as positioners. Various devices such as ion chambers, scintillation counters, photodiodes, and photoelectron collectors have been used as

Writing executable assertions to test flight software

Science.gov (United States)

Mahmood, A.; Andrews, D. M.; Mccluskey, E. J.

1984-01-01

An executable assertion is a logical statement about the variables or a block of code. If there is no error during execution, the assertion statement results in a true value. Executable assertions can be used for dynamic testing of software. They can be employed for validation during the design phase, and exception and error detection during the operation phase. The present investigation is concerned with the problem of writing executable assertions, taking into account the use of assertions for testing flight software. They can be employed for validation during the design phase, and for exception handling and error detection during the operation phase The digital flight control system and the flight control software are discussed. The considered system provides autopilot and flight director modes of operation for automatic and manual control of the aircraft during all phases of flight. Attention is given to techniques for writing and using assertions to test flight software, an experimental setup to test flight software, and language features to support efficient use of assertions.

Variation of the Young's modulus with plastic strain applying to elastoplastic software

International Nuclear Information System (INIS)

Morestin, F.; Boivin, M.

1993-01-01

Work hardening of steel involves modifications of the elastic properties of the material, for instance, an increase of its yield stress. It may be also the cause of an appreciable decrease of the Young's modulus. This property decreases as plastic strain increases. Experiments with a microcomputer controlled tensile test machine indicated that diminution could reach more than 10% of the initial value, after only 5% of plastic strain. In spite of this fact, lots of elastoplastic softwares don't combine the decrease of the Young's modulus with plastification though it may involve obvious differences among results. As an application we have developed a software which computes the deformation of steel sheet in press forming, after springback. This software takes into account the decrease of the Young's modulus and its results are very close to experimental values. Quite arbitrarily, we noticed a recovery of the Young's modulus of plastified specimens after few days but not for all steels tested. (author)

Proceedings of the Fifth Triennial Software Quality Forum 2000, Software for the Next Millennium, Software Quality Forum

Energy Technology Data Exchange (ETDEWEB)

Scientific Software Engineering Group, CIC-12

2000-04-01

The Software Quality Forum is a triennial conference held by the Software Quality Assurance Subcommittee for the Department of Energy's Quality Managers. The forum centers on key issues, information, and technology important in software development for the Nuclear Weapons Complex. This year it will be opened up to include local information technology companies and software vendors presenting their solutions, ideas, and lessons learned. The Software Quality Forum 2000 will take on a more hands-on, instructional tone than those previously held. There will be an emphasis on providing information, tools, and resources to assist developers in their goal of producing next generation software.

Software piracy: Physical and legal protection methods

Energy Technology Data Exchange (ETDEWEB)

Orlandi, E

1991-02-01

Advantages and disadvantages, in terms of reliability and cost, are assessed for different physical and legal methods of protection of computer software, e.g., encryption and key management. The paper notes, however, that no protection system is 100% safe; the best approach is to implement a sufficient amount of protection such as to make piracy uneconomical relative to the risks involved.

A controlled experiment on the impact of software structure on maintainability

Science.gov (United States)

Rombach, Dieter H.

1987-01-01

The impact of software structure on maintainability aspects including comprehensibility, locality, modifiability, and reusability in a distributed system environment is studied in a controlled maintenance experiment involving six medium-size distributed software systems implemented in LADY (language for distributed systems) and six in an extended version of sequential PASCAL. For all maintenance aspects except reusability, the results were quantitatively given in terms of complexity metrics which could be automated. The results showed LADY to be better suited to the development of maintainable software than the extension of sequential PASCAL. The strong typing combined with high parametrization of units is suggested to improve the reusability of units in LADY.

NASA software documentation standard software engineering program

Science.gov (United States)

1991-01-01

The NASA Software Documentation Standard (hereinafter referred to as Standard) can be applied to the documentation of all NASA software. This Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. This basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

A new entropy based method for computing software structural complexity

International Nuclear Information System (INIS)

Roca, Jose L.

2002-01-01

In this paper a new methodology for the evaluation of software structural complexity is described. It is based on the entropy evaluation of the random uniform response function associated with the so called software characteristic function SCF. The behavior of the SCF with the different software structures and their relationship with the number of inherent errors is investigated. It is also investigated how the entropy concept can be used to evaluate the complexity of a software structure considering the SCF as a canonical representation of the graph associated with the control flow diagram. The functions, parameters and algorithms that allow to carry out this evaluation are also introduced. After this analytic phase follows the experimental phase, verifying the consistency of the proposed metric and their boundary conditions. The conclusion is that the degree of software structural complexity can be measured as the entropy of the random uniform response function of the SCF. That entropy is in direct relationship with the number of inherent software errors and it implies a basic hazard failure rate for it, so that a minimum structure assures a certain stability and maturity of the program. This metric can be used, either to evaluate the product or the process of software development, as development tool or for monitoring the stability and the quality of the final product. (author)

Understanding software faults and their role in software reliability modeling

Science.gov (United States)

Munson, John C.

1994-01-01

regression equation. Since most of the existing metrics have common elements and are linear combinations of these common elements, it seems reasonable to investigate the structure of the underlying common factors or components that make up the raw metrics. The technique we have chosen to use to explore this structure is a procedure called principal components analysis. Principal components analysis is a decomposition technique that may be used to detect and analyze collinearity in software metrics. When confronted with a large number of metrics measuring a single construct, it may be desirable to represent the set by some smaller number of variables that convey all, or most, of the information in the original set. Principal components are linear transformations of a set of random variables that summarize the information contained in the variables. The transformations are chosen so that the first component accounts for the maximal amount of variation of the measures of any possible linear transform; the second component accounts for the maximal amount of residual variation; and so on. The principal components are constructed so that they represent transformed scores on dimensions that are orthogonal. Through the use of principal components analysis, it is possible to have a set of highly related software attributes mapped into a small number of uncorrelated attribute domains. This definitively solves the problem of multi-collinearity in subsequent regression analysis. There are many software metrics in the literature, but principal component analysis reveals that there are few distinct sources of variation, i.e. dimensions, in this set of metrics. It would appear perfectly reasonable to characterize the measurable attributes of a program with a simple function of a small number of orthogonal metrics each of which represents a distinct software attribute domain.

Seeding the cloud: Financial bootstrapping in the computer software sector

OpenAIRE

Mac An Bhaird, Ciarán; Lynn, Theo

2015-01-01

This study investigates resourcing of computer software companies that have adopted cloud computing for the development and delivery of application software. Use of this innovative technology potentially impacts firm financing because the initial infrastructure investment requirement is much lower than for packaged software, lead time to market is shorter, and cloud computing supports instant scalability. We test these predictions by conducting in-depth interviews with founders of 18 independ...

The portability of the "Electronics Workbench" simulation software to China

NARCIS (Netherlands)

Collis, Betty; Zhi-Cheng, Dong

1993-01-01

This article discusses the portability of the Canadian-made simulation software package, "Electronic Workbench" package (EWB) to China. As part of a larger project investigating the portability of various educational software packages, the EWB package was used in electronics instruction in China and

Software Quality and Copyright: Issues in Computer-Assisted Instruction.

Science.gov (United States)

Helm, Virginia

The two interconnected problems of educational quality and piracy are described and analyzed in this book, which begins with an investigation of the accusations regarding the alleged dismal quality of educational software. The reality behind accusations of rampant piracy and the effect of piracy on the quality of educational software is examined…

Developing software is not an easy matter

Directory of Open Access Journals (Sweden)

Tina Cardrige

2014-12-01

Full Text Available Why is it so difficult to learn to develop software? This question has been trying to answer for a long time, but has not yet found a solution to this issue. Moreover, it tends to confuse development with programming, and this also creates problems to elucidate the question. In an era in which urgently required improve the quality, and reliability, and safety of software it becomes urgent to potentiate or develop skills and abilities in professionals to meet these needs. But students are not interested in making careers involving these concepts, they prefer other less demanding and easier to achieve a certification. This article attempts to answer the question and present some suggestions for overcoming this difficulty.

A new curimeter with advanced software capabilities

International Nuclear Information System (INIS)

Arista Romeo, Eduardo J.; Toledo Acosta, Rene B.; Dotres Lleras, Armando

2001-01-01

A new curimeter, model CD-N102, developed at CEADEN is described. Emphasis is made on the description of the hardware and basic low level software of the device. Attention is paid to meteorological and quality assurance aspects of the problem, as this device is destined to complete the Nuclear Medicine Modules at different hospitals on the country. The characteristics obtained are mentioned. A full block schema is presented and key blocks are discussed in more detail. Also, there are discussed the utilization of software resources and methods for achieving the aforementioned characteristics without further increasing the complexity of the analog part of the device, and trade off between the different characteristics involved and final decisions taken at the design stage

Validation of software releases for CMS

International Nuclear Information System (INIS)

Gutsche, Oliver

2010-01-01

The CMS software stack currently consists of more than 2 Million lines of code developed by over 250 authors with a new version being released every week. CMS has setup a validation process for quality assurance which enables the developers to compare the performance of a release to previous releases and references. The validation process provides the developers with reconstructed datasets of real data and MC samples. The samples span the whole range of detector effects and important physics signatures to benchmark the performance of the software. They are used to investigate interdependency effects of all CMS software components and to find and fix bugs. The release validation process described here is an integral part of CMS software development and contributes significantly to ensure stable production and analysis. It represents a sizable contribution to the overall MC production of CMS. Its success emphasizes the importance of a streamlined release validation process for projects with a large code basis and significant number of developers and can function as a model for future projects.

Assessing students' performance in software requirements engineering education using scoring rubrics

Science.gov (United States)

Mkpojiogu, Emmanuel O. C.; Hussain, Azham

2017-10-01

The study investigates how helpful the use of scoring rubrics is, in the performance assessment of software requirements engineering students and whether its use can lead to students' performance improvement in the development of software requirements artifacts and models. Scoring rubrics were used by two instructors to assess the cognitive performance of a student in the design and development of software requirements artifacts. The study results indicate that the use of scoring rubrics is very helpful in objectively assessing the performance of software requirements or software engineering students. Furthermore, the results revealed that the use of scoring rubrics can also produce a good achievement assessments direction showing whether a student is either improving or not in a repeated or iterative assessment. In a nutshell, its use leads to the performance improvement of students. The results provided some insights for further investigation and will be beneficial to researchers, requirements engineers, system designers, developers and project managers.

Qualification of safety-critical software for digital reactor safety system in nuclear power plants

International Nuclear Information System (INIS)

Kwon, Kee-Choon; Park, Gee-Yong; Kim, Jang-Yeol; Lee, Jang-Soo

2013-01-01

This paper describes the software qualification activities for the safety-critical software of the digital reactor safety system in nuclear power plants. The main activities of the software qualification processes are the preparation of software planning documentations, verification and validation (V and V) of the software requirements specifications (SRS), software design specifications (SDS) and codes, and the testing of the integrated software and integrated system. Moreover, the software safety analysis and software configuration management are involved in the software qualification processes. The V and V procedure for SRS and SDS contains a technical evaluation, licensing suitability evaluation, inspection and traceability analysis, formal verification, software safety analysis, and an evaluation of the software configuration management. The V and V processes for the code are a traceability analysis, source code inspection, test case and test procedure generation. Testing is the major V and V activity of the software integration and system integration phases. The software safety analysis employs a hazard operability method and software fault tree analysis. The software configuration management in each software life cycle is performed by the use of a nuclear software configuration management tool. Through these activities, we can achieve the functionality, performance, reliability, and safety that are the major V and V objectives of the safety-critical software in nuclear power plants. (author)

Pragmatic Software Innovation

DEFF Research Database (Denmark)

Aaen, Ivan; Jensen, Rikke Hagensby

2014-01-01

We understand software innovation as concerned with introducing innovation into the development of software intensive systems, i.e. systems in which software development and/or integration are dominant considerations. Innovation is key in almost any strategy for competitiveness in existing markets......, for creating new markets, or for curbing rising public expenses, and software intensive systems are core elements in most such strategies. Software innovation therefore is vital for about every sector of the economy. Changes in software technologies over the last decades have opened up for experimentation......, learning, and flexibility in ongoing software projects, but how can this change be used to facilitate software innovation? How can a team systematically identify and pursue opportunities to create added value in ongoing projects? In this paper, we describe Deweyan pragmatism as the philosophical foundation...

Mass market development strategies of software industries: Case study based research

Directory of Open Access Journals (Sweden)

Varun Gupta

2016-09-01

Full Text Available The success in competitive mass market software development depends on the quality of software development and market segments targeted. Market segments are categorized by uncertainties contributed by “Newness” and “turbulences”, making the software success stochastic in nature. Selecting good market segments, delivering high quality software versions in the lowest time than competitors, result in increasing demand in markets and ultimately revenues. Enhanced customer base is beneficial for current product as well as for future products of industry in the form of increased reputation and increased involvement of customers in future development. The case study was conducted with 13 representatives drawing experiences of 14 mass market projects. Results indicate that software solutions are delivered to few investors or in highly competitive markets, as per the survey's findings of the marketing departments. The software organizations are reluctant to deliver relatively complex solutions in new markets unless and until strongly convinced with the probable success. The method for selection of market segments belonging to new and existing markets for undertaking the software delivery is also proposed in this paper. The model will help software industry decide the market segments and high abstract level features that could increase probability of software success. Poor selection of markets or targeting markets of “improper” size affects the market share of the industry to a great extend.

The Virtual Genetics Lab II: Improvements to a Freely Available Software Simulation of Genetics

Science.gov (United States)

White, Brian T.

2012-01-01

The Virtual Genetics Lab II (VGLII) is an improved version of the highly successful genetics simulation software, the Virtual Genetics Lab (VGL). The software allows students to use the techniques of genetic analysis to design crosses and interpret data to solve realistic genetics problems involving a hypothetical diploid insect. This is a brief…

A Survey of Industrial Involvement in Open Source

OpenAIRE

Røsdal, Andreas

2006-01-01

This thesis presents the results of an explorative survey of industrial involvement in open source. The survey is performed in collaboration with participants from the European ITEA project, COSI (Co-development using inner & Open source in Software Intensive products). The survey was performed to explore aspects of industrial involvement in open source, as industrial management of open source project, industrial use of open source components, related development, and communication processes,...

Development of Software for Measurement and Analysis of Solar Radiation

International Nuclear Information System (INIS)

Mohamad Idris Taib; Abul Adli Anuar; Noor Ezati Shuib

2015-01-01

This software was under development using LabVIEW to be using with StellarNet spectrometers system with USB communication to computer. LabVIEW have capabilities in hardware interfacing, graphical user interfacing and mathematical calculation including array manipulation and processing. This software read data from StellarNet spectrometer in real-time and then processed for analysis. Several measurement of solar radiation and analysis have been done. Solar radiation involved mainly infra-red, visible light and ultra-violet. With solar radiation spectrum data, information of weather and suitability of plant can be gathered and analyzed. Furthermore, optimization of utilization and safety precaution of solar radiation can be planned. Using this software, more research and development in utilization and safety of solar radiation can be explored. (author)

Software testability and its application to avionic software

Science.gov (United States)

Voas, Jeffrey M.; Miller, Keith W.; Payne, Jeffery E.

1993-01-01

Randomly generated black-box testing is an established yet controversial method of estimating software reliability. Unfortunately, as software applications have required higher reliabilities, practical difficulties with black-box testing have become increasingly problematic. These practical problems are particularly acute in life-critical avionics software, where requirements of 10 exp -7 failures per hour of system reliability can translate into a probability of failure (POF) of perhaps 10 exp -9 or less for each individual execution of the software. This paper describes the application of one type of testability analysis called 'sensitivity analysis' to B-737 avionics software; one application of sensitivity analysis is to quantify whether software testing is capable of detecting faults in a particular program and thus whether we can be confident that a tested program is not hiding faults. We so 80 by finding the testabilities of the individual statements of the program, and then use those statement testabilities to find the testabilities of the functions and modules. For the B-737 system we analyzed, we were able to isolate those functions that are more prone to hide errors during system/reliability testing.

Network-based analysis of software change propagation.

Science.gov (United States)

Wang, Rongcun; Huang, Rubing; Qu, Binbin

2014-01-01

The object-oriented software systems frequently evolve to meet new change requirements. Understanding the characteristics of changes aids testers and system designers to improve the quality of softwares. Identifying important modules becomes a key issue in the process of evolution. In this context, a novel network-based approach is proposed to comprehensively investigate change distributions and the correlation between centrality measures and the scope of change propagation. First, software dependency networks are constructed at class level. And then, the number of times of cochanges among classes is minded from software repositories. According to the dependency relationships and the number of times of cochanges among classes, the scope of change propagation is calculated. Using Spearman rank correlation analyzes the correlation between centrality measures and the scope of change propagation. Three case studies on java open source software projects Findbugs, Hibernate, and Spring are conducted to research the characteristics of change propagation. Experimental results show that (i) change distribution is very uneven; (ii) PageRank, Degree, and CIRank are significantly correlated to the scope of change propagation. Particularly, CIRank shows higher correlation coefficient, which suggests it can be a more useful indicator for measuring the scope of change propagation of classes in object-oriented software system.

The software life cycle

CERN Document Server

Ince, Darrel

1990-01-01

The Software Life Cycle deals with the software lifecycle, that is, what exactly happens when software is developed. Topics covered include aspects of software engineering, structured techniques of software development, and software project management. The use of mathematics to design and develop computer systems is also discussed. This book is comprised of 20 chapters divided into four sections and begins with an overview of software engineering and software development, paying particular attention to the birth of software engineering and the introduction of formal methods of software develop

Improving Software Sustainability: Lessons Learned from Profiles in Science.

Science.gov (United States)

Gallagher, Marie E

2013-01-01

. Sometimes these changes happen on short notice, so we continually monitor our library's software for signs of endangerment. We have attempted to replace proprietary software with suitable in-house or open source software. When the replacement involves a standalone piece of software with a nearly equivalent version, such as replacing a commercial HTTP server with an open source HTTP server, the replacement is straightforward. Recently we replaced software that functioned not only as our search engine but also as the backbone of the architecture of our Web site. In this paper, we describe the lessons learned and the pros and cons of replacing this software with open source software.

Parallelization of an existing high energy physics event reconstruction software package

International Nuclear Information System (INIS)

Schiefer, R.; Francis, D.

1996-01-01

Software parallelization allows an efficient use of available computing power to increase the performance of applications. In a case study the authors have investigated the parallelization of high energy physics event reconstruction software in terms of costs (effort, computing resource requirements), benefits (performance increase) and the feasibility of a systematic parallelization approach. Guidelines facilitating a parallel implementation are proposed for future software development

A General Water Resources Regulation Software System in China

Science.gov (United States)

LEI, X.

2017-12-01

To avoid iterative development of core modules in water resource normal regulation and emergency regulation and improve the capability of maintenance and optimization upgrading of regulation models and business logics, a general water resources regulation software framework was developed based on the collection and analysis of common demands for water resources regulation and emergency management. It can provide a customizable, secondary developed and extensible software framework for the three-level platform "MWR-Basin-Province". Meanwhile, this general software system can realize business collaboration and information sharing of water resources regulation schemes among the three-level platforms, so as to improve the decision-making ability of national water resources regulation. There are four main modules involved in the general software system: 1) A complete set of general water resources regulation modules allows secondary developer to custom-develop water resources regulation decision-making systems; 2) A complete set of model base and model computing software released in the form of Cloud services; 3) A complete set of tools to build the concept map and model system of basin water resources regulation, as well as a model management system to calibrate and configure model parameters; 4) A database which satisfies business functions and functional requirements of general water resources regulation software can finally provide technical support for building basin or regional water resources regulation models.

Médicarte software developed for the Quebec microprocessor health card project.

Science.gov (United States)

Lavoie, G; Tremblay, L; Durant, P; Papillon, M J; Bérubé, J; Fortin, J P

1995-01-01

The Quebec Patient Smart Card Project is a Provincial Government initiative under the responsibility of the Rgie de l'assurance-maladie du Québec (Quebec Health Insurance Board). Development, implementation, and assessment duties were assigned to a team from Université Laval, which in turn joined a group from the Direction de la santé publique du Bas-St-Laurent in Rimouski, where the experiment is taking place. The pilot project seeks to evaluate the use and acceptance of a microprocessor card as a way to improve the exchange of clinical information between card users and various health professionals. The card can be best described as a résumé containing information pertinent to an individual's health history. It is not a complete medical file; rather, it is a summary to be used as a starting point for a discussion between health professionals and patients. The target population is composed of persons 60 years and over, pregnant women, infants under 18 months, and the residents of a small town located in the target area, St-Fabien, regardless of age. The health professionals involved are general practitioners, specialists, pharmacists, nurses, and ambulance personnel. Participation in the project is on a voluntary basis. Each health care provider participating in the project has a personal identification number (PIN) and must use both an access card and a user card to access information. This prevents unauthorized access to a patient's card and allows the staff to sign and date information entered onto the patient card. To test the microprocessor card, we developed software based on a problem-oriented approach integrating diagnosis, investigations, treatments, and referrals. This software is not an expert system that constrains the clinician to a particular decisional algorithm. Instead, the software supports the physician in decision making. The software was developed with a graphical interface (Windows 3.1) to maximize its user friendliness. A version of the

Workflow Based Software Development Environment, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The goal of this proposed research is to investigate and develop a workflow based tool, the Software Developers Assistant, to facilitate the collaboration between...

Workflow Based Software Development Environment, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The goal of this proposed research is to investigate and develop a workflow based tool, the Software Developers Assistant, to facilitate the collaboration between...

Software breadboard study

Science.gov (United States)

Nuckolls, C.; Frank, Mark

1990-01-01

The overall goal of this study was to develop new concepts and technology for the Comet Rendezvous Asteroid Flyby (CRAF), Cassini, and other future deep space missions which maximally conform to the Functional Specification for the NASA X-Band Transponder (NXT), FM513778 (preliminary, revised July 26, 1988). The study is composed of two tasks. The first task was to investigate a new digital signal processing technique which involves the processing of 1-bit samples and has the potential for significant size, mass, power, and electrical performance improvements over conventional analog approaches. The entire X-band receiver tracking loop was simulated on a digital computer using a high-level programming language. Simulations on this 'software breadboard' showed the technique to be well-behaved and a good approximation to its analog predecessor from threshold to strong signal levels in terms of tracking-loop performance, command signal-to-noise ratio and ranging signal-to-noise ratio. The successful completion of this task paves the way for building a hardware breadboard, the recommended next step in confirming this approach is ready for incorporation into flight hardware. The second task in this study was to investigate another technique which provides considerable simplification in the synthesis of the receiver first LO over conventional phase-locked multiplier schemes and in this approach, provides down-conversion for an S-band emergency receive mode without the need of an additional LO. The objective of this study was to develop methodology and models to predict the conversion loss, input RF bandwidth, and output RF bandwidth of a series GaAs FET sampling mixer and to breadboard and test a circuit design suitable for the X and S-band down-conversion applications.

Calidad del software: camino hacia una verdadera industria del software

Directory of Open Access Journals (Sweden)

Saulo Ernesto Rojas Salamanca

1999-07-01

Full Text Available El software es quizá uno de los productos de la ingeniería que más ha evolucionado en muy poco tiempo, pasando desde el software empírico o artesanal hasta llegar al software desarrollado bajo los principios y herramientas de la ingeniería del software. Sin embargo, dentro de estos cambios, las personas encargadas de la elaboración del software se han enfrentado a problemas muy comunes: unos debido a la exigencia cada vez mayor en la capacidad de resultados del software, debido al permanente cambio de condiciones lo que aumenta su complejidad y obsolescencia; y otros, debido a la carencia de herramientas adecuadas y estándares de tipo organizacional encaminados al mejoramiento de los procesos en el desarrollo del software. Hacia la búsqueda de mecanismos de solución de estos últimos problemas se orienta este artículo...

Modular Software for Spacecraft Navigation Using the Global Positioning System (GPS)

Science.gov (United States)

Truong, S. H.; Hartman, K. R.; Weidow, D. A.; Berry, D. L.; Oza, D. H.; Long, A. C.; Joyce, E.; Steger, W. L.

1996-01-01

The Goddard Space Flight Center Flight Dynamics and Mission Operations Divisions have jointly investigated the feasibility of engineering modular Global Positioning SYSTEM (GPS) navigation software to support both real time flight and ground postprocessing configurations. The goals of this effort are to define standard GPS data interfaces and to engineer standard, reusable navigation software components that can be used to build a broad range of GPS navigation support applications. The paper discusses the GPS modular software (GMOD) system and operations concepts, major requirements, candidate software architecture, feasibility assessment and recommended software interface standards. In additon, ongoing efforts to broaden the scope of the initial study and to develop modular software to support autonomous navigation using GPS are addressed,

Using software metrics and software reliability models to attain acceptable quality software for flight and ground support software for avionic systems

Science.gov (United States)

Lawrence, Stella

1992-01-01

This paper is concerned with methods of measuring and developing quality software. Reliable flight and ground support software is a highly important factor in the successful operation of the space shuttle program. Reliability is probably the most important of the characteristics inherent in the concept of 'software quality'. It is the probability of failure free operation of a computer program for a specified time and environment.

Software Radar Technology

Directory of Open Access Journals (Sweden)

Tang Jun

2015-08-01

Full Text Available In this paper, the definition and the key features of Software Radar, which is a new concept, are proposed and discussed. We consider the development of modern radar system technology to be divided into three stages: Digital Radar, Software radar and Intelligent Radar, and the second stage is just commencing now. A Software Radar system should be a combination of various modern digital modular components conformed to certain software and hardware standards. Moreover, a software radar system with an open system architecture supporting to decouple application software and low level hardware would be easy to adopt "user requirements-oriented" developing methodology instead of traditional "specific function-oriented" developing methodology. Compared with traditional Digital Radar, Software Radar system can be easily reconfigured and scaled up or down to adapt to the changes of requirements and technologies. A demonstration Software Radar signal processing system, RadarLab 2.0, which has been developed by Tsinghua University, is introduced in this paper and the suggestions for the future development of Software Radar in China are also given in the conclusion.

Application of Metric-based Software Reliability Analysis to Example Software

International Nuclear Information System (INIS)

Kim, Man Cheol; Smidts, Carol

2008-07-01

The software reliability of TELLERFAST ATM software is analyzed by using two metric-based software reliability analysis methods, a state transition diagram-based method and a test coverage-based method. The procedures for the software reliability analysis by using the two methods and the analysis results are provided in this report. It is found that the two methods have a relation of complementary cooperation, and therefore further researches on combining the two methods to reflect the benefit of the complementary cooperative effect to the software reliability analysis are recommended

Software error masking effect on hardware faults

International Nuclear Information System (INIS)

Choi, Jong Gyun; Seong, Poong Hyun

1999-01-01

Based on the Very High Speed Integrated Circuit (VHSIC) Hardware Description Language (VHDL), in this work, a simulation model for fault injection is developed to estimate the dependability of the digital system in operational phase. We investigated the software masking effect on hardware faults through the single bit-flip and stuck-at-x fault injection into the internal registers of the processor and memory cells. The fault location reaches all registers and memory cells. Fault distribution over locations is randomly chosen based on a uniform probability distribution. Using this model, we have predicted the reliability and masking effect of an application software in a digital system-Interposing Logic System (ILS) in a nuclear power plant. We have considered four the software operational profiles. From the results it was found that the software masking effect on hardware faults should be properly considered for predicting the system dependability accurately in operation phase. It is because the masking effect was formed to have different values according to the operational profile

Data to Pictures to Data: Outreach Imaging Software and Metadata

Science.gov (United States)

Levay, Z.

2011-07-01

A convergence between astronomy science and digital photography has enabled a steady stream of visually rich imagery from state-of-the-art data. The accessibility of hardware and software has facilitated an explosion of astronomical images for outreach, from space-based observatories, ground-based professional facilities and among the vibrant amateur astrophotography community. Producing imagery from science data involves a combination of custom software to understand FITS data (FITS Liberator), off-the-shelf, industry-standard software to composite multi-wavelength data and edit digital photographs (Adobe Photoshop), and application of photo/image-processing techniques. Some additional effort is needed to close the loop and enable this imagery to be conveniently available for various purposes beyond web and print publication. The metadata paradigms in digital photography are now complying with FITS and science software to carry information such as keyword tags and world coordinates, enabling these images to be usable in more sophisticated, imaginative ways exemplified by Sky in Google Earth and World Wide Telescope.

Combined application of Product Lifecycle and Software Configuration Management systems for ITER remote handling

International Nuclear Information System (INIS)

Muhammad, Ali; Esque, Salvador; Aha, Liisa; Mattila, Jouni; Siuko, Mikko; Vilenius, Matti; Jaervenpaeae, Jorma; Irving, Mike; Damiani, Carlo; Semeraro, Luigi

2009-01-01

The advantages of Product Lifecycle Management (PLM) systems are widely understood among the industry and hence a PLM system is already in use by International Thermonuclear Experimental Reactor (ITER) Organization (IO). However, with the increasing involvement of software in the development, the role of Software Configuration Management (SCM) systems have become equally important. The SCM systems can be useful to meet the higher demands on Safety Engineering (SE), Quality Assurance (QA), Validation and Verification (V and V) and Requirements Management (RM) of the developed software tools. In an experimental environment, such as ITER, the new remote handling requirements emerge frequently. This means the development of new tools or the modification of existing tools and the development of new remote handling procedures or the modification of existing remote handling procedures. PLM and SCM systems together can be of great advantage in the development and maintenance of such remote handling system. In this paper, we discuss how PLM and SCM systems can be integrated together and play their role during the development and maintenance of ITER remote handling system. We discuss the possibility to investigate such setup at DTP2 (Divertor Test Platform 2), which is the full scale mock-up facility to verify the ITER divertor remote handling and maintenance concepts.

Software diversity: way to enhance safety?

International Nuclear Information System (INIS)

Dahll, G.; Bishop, P.

1990-01-01

The topic of the paper is the use of diversely produced programs to enhance the safety of computer-based systems applied in safety-critical areas. The paper starts with a survey of scientific investigations on the impact of software redundancy made at various institutions around the world. Main emphasis will, however, be put on the PODS/STEM projects, which have been performed at the OECD Halden Project in cooperation with the Technical Research Center of Finland, the Safety and Reliability Directorate, AEA Technology, UK, and Central Electricity Research Laboratory (now National Power Technology and Environment Centre), UK. In these projects, three program versions were made independently by three different teams, all based on the same specification. The three programs were tested back-to-back with a large amount of test data. The experience and results from this process were carefully logged and used for further analysis. Various strategies for test data selection were compared, with respect to fault finding strategies, as well as to branch and statement coverages of the tested programs. The assumption of independence of failures in diversely produced programs was investigated. A particularly interesting effect, namely failure masking due to program structure, was revealed. Static analysis techniques, software measures, and software reliability estimates were also studied. (author)

Guideline for Bayesian Net based Software Fault Estimation Method for Reactor Protection System

International Nuclear Information System (INIS)

Eom, Heung Seop; Park, Gee Yong; Jang, Seung Cheol

2011-01-01

The purpose of this paper is to provide a preliminary guideline for the estimation of software faults in a safety-critical software, for example, reactor protection system's software. As the fault estimation method is based on Bayesian Net which intensively uses subjective probability and informal data, it is necessary to define formal procedure of the method to minimize the variability of the results. The guideline describes assumptions, limitations and uncertainties, and the product of the fault estimation method. The procedure for conducting a software fault-estimation method is then outlined, highlighting the major tasks involved. The contents of the guideline are based on our own experience and a review of research guidelines developed for a PSA

Possibilities and limitations of applying software reliability growth models to safety-critical software

International Nuclear Information System (INIS)

Kim, Man Cheol; Jang, Seung Cheol; Ha, Jae Joo

2007-01-01

It is generally known that software reliability growth models such as the Jelinski-Moranda model and the Goel-Okumoto's Non-Homogeneous Poisson Process (NHPP) model cannot be applied to safety-critical software due to a lack of software failure data. In this paper, by applying two of the most widely known software reliability growth models to sample software failure data, we demonstrate the possibility of using the software reliability growth models to prove the high reliability of safety-critical software. The high sensitivity of a piece of software's reliability to software failure data, as well as a lack of sufficient software failure data, is also identified as a possible limitation when applying the software reliability growth models to safety-critical software

Capi text V.1--data analysis software for nailfold skin capillaroscopy.

Science.gov (United States)

Dobrev, Hristo P

2007-01-01

Nailfold skin capillaroscopy is a simple non-invasive method used to assess conditions of disturbed microcirculation such as Raynaud's phenomenon, acrocyanosis, perniones, connective tissue diseases, psoriasis, diabetes mellitus, neuropathy and vibration disease. To develop data analysis software aimed at assisting the documentation and analysis of a capillaroscopic investigation. SOFTWARE DESCRIPTION: The programme is based on a modular principle. The module "Nomenclatures" includes menus for the patients' data. The module "Examinations" includes menus for all general and specific aspects of the medical examination and capillaroscopic investigations. The modules "Settings" and "Information" include customization menus for the programme. The results of nailfold capillaroscopy can be printed in a short or expanded form. This software allows physicians to perform quick search by using various specified criteria and prepare analyses and reports. This software programme will facilitate any practitioner who performs nailfold skin capillaroscopy.

Agile software assessment

OpenAIRE

Nierstrasz Oscar; Lungu Mircea

2012-01-01

Informed decision making is a critical activity in software development but it is poorly supported by common development environments which focus mainly on low level programming tasks. We posit the need for agile software assessment which aims to support decision making by enabling rapid and effective construction of software models and custom analyses. Agile software assessment entails gathering and exploiting the broader context of software information related to the system at hand as well ...

Selection of Steady-State Process Simulation Software to Optimize Treatment of Radioactive and Hazardous Waste

International Nuclear Information System (INIS)

Nichols, T. T.; Barnes, C. M.; Lauerhass, L.; Taylor, D. D.

2001-01-01

The process used for selecting a steady-state process simulator under conditions of high uncertainty and limited time is described. Multiple waste forms, treatment ambiguity, and the uniqueness of both the waste chemistries and alternative treatment technologies result in a large set of potential technical requirements that no commercial simulator can totally satisfy. The aim of the selection process was two-fold. First, determine the steady-state simulation software that best, albeit not completely, satisfies the requirements envelope. And second, determine if the best is good enough to justify the cost. Twelve simulators were investigated with varying degrees of scrutiny. The candidate list was narrowed to three final contenders: ASPEN Plus 10.2, PRO/II 5.11, and CHEMCAD 5.1.0. It was concluded from ''road tests'' that ASPEN Plus appears to satisfy the project's technical requirements the best and is worth acquiring. The final software decisions provide flexibility: they involve annual rather than multi-year licensing, and they include periodic re-assessment

Selection of Steady-State Process Simulation Software to Optimize Treatment of Radioactive and Hazardous Waste

Energy Technology Data Exchange (ETDEWEB)

Nichols, Todd Travis; Barnes, Charles Marshall; Lauerhass, Lance; Taylor, Dean Dalton

2001-06-01

The process used for selecting a steady-state process simulator under conditions of high uncertainty and limited time is described. Multiple waste forms, treatment ambiguity, and the uniqueness of both the waste chemistries and alternative treatment technologies result in a large set of potential technical requirements that no commercial simulator can totally satisfy. The aim of the selection process was two-fold. First, determine the steady-state simulation software that best, albeit not completely, satisfies the requirements envelope. And second, determine if the best is good enough to justify the cost. Twelve simulators were investigated with varying degrees of scrutiny. The candidate list was narrowed to three final contenders: ASPEN Plus 10.2, PRO/II 5.11, and CHEMCAD 5.1.0. It was concluded from "road tests" that ASPEN Plus appears to satisfy the project's technical requirements the best and is worth acquiring. The final software decisions provide flexibility: they involve annual rather than multi-year licensing, and they include periodic re-assessment.

The intersection of software and strengths: Using internet technology and case management software to assist Strength-Based Practice.

Science.gov (United States)

Clark, Michael D; Brien, Dale W

2016-01-01

The focus of this investigation is the helping professionals working within American Indian and Alaska Native (AI/AN) communities. This article looks at how innovative technology-in the form of automated case management software and Internet connectivity-can assist effective implementation of Strength-based Practice and agency services within tribal courts and the many other helping agencies that serve AI/AN populations. We seek to expand practice knowledge by reviewing the benefits that this software and Internet connectivity can offer to agency operations and exploring how they can assist case management services.

HAZARD ANALYSIS SOFTWARE

International Nuclear Information System (INIS)

Sommer, S; Tinh Tran, T.

2008-01-01

Washington Safety Management Solutions, LLC developed web-based software to improve the efficiency and consistency of hazard identification and analysis, control selection and classification, and to standardize analysis reporting at Savannah River Site. In the new nuclear age, information technology provides methods to improve the efficiency of the documented safety analysis development process which includes hazard analysis activities. This software provides a web interface that interacts with a relational database to support analysis, record data, and to ensure reporting consistency. A team of subject matter experts participated in a series of meetings to review the associated processes and procedures for requirements and standard practices. Through these meetings, a set of software requirements were developed and compiled into a requirements traceability matrix from which software could be developed. The software was tested to ensure compliance with the requirements. Training was provided to the hazard analysis leads. Hazard analysis teams using the software have verified its operability. The software has been classified as NQA-1, Level D, as it supports the analysis team but does not perform the analysis. The software can be transported to other sites with alternate risk schemes. The software is being used to support the development of 14 hazard analyses. User responses have been positive with a number of suggestions for improvement which are being incorporated as time permits. The software has enforced a uniform implementation of the site procedures. The software has significantly improved the efficiency and standardization of the hazard analysis process

Tool Use Within NASA Software Quality Assurance

Science.gov (United States)

Shigeta, Denise; Port, Dan; Nikora, Allen P.; Wilf, Joel

2013-01-01

As space mission software systems become larger and more complex, it is increasingly important for the software assurance effort to have the ability to effectively assess both the artifacts produced during software system development and the development process itself. Conceptually, assurance is a straightforward idea - it is the result of activities carried out by an organization independent of the software developers to better inform project management of potential technical and programmatic risks, and thus increase management's confidence in the decisions they ultimately make. In practice, effective assurance for large, complex systems often entails assessing large, complex software artifacts (e.g., requirements specifications, architectural descriptions) as well as substantial amounts of unstructured information (e.g., anomaly reports resulting from testing activities during development). In such an environment, assurance engineers can benefit greatly from appropriate tool support. In order to do so, an assurance organization will need accurate and timely information on the tool support available for various types of assurance activities. In this paper, we investigate the current use of tool support for assurance organizations within NASA, and describe on-going work at JPL for providing assurance organizations with the information about tools they need to use them effectively.

Framework for Small-Scale Experiments in Software Engineering: Guidance and Control Software Project: Software Engineering Case Study

Science.gov (United States)

Hayhurst, Kelly J.

1998-01-01

Software is becoming increasingly significant in today's critical avionics systems. To achieve safe, reliable software, government regulatory agencies such as the Federal Aviation Administration (FAA) and the Department of Defense mandate the use of certain software development methods. However, little scientific evidence exists to show a correlation between software development methods and product quality. Given this lack of evidence, a series of experiments has been conducted to understand why and how software fails. The Guidance and Control Software (GCS) project is the latest in this series. The GCS project is a case study of the Requirements and Technical Concepts for Aviation RTCA/DO-178B guidelines, Software Considerations in Airborne Systems and Equipment Certification. All civil transport airframe and equipment vendors are expected to comply with these guidelines in building systems to be certified by the FAA for use in commercial aircraft. For the case study, two implementations of a guidance and control application were developed to comply with the DO-178B guidelines for Level A (critical) software. The development included the requirements, design, coding, verification, configuration management, and quality assurance processes. This paper discusses the details of the GCS project and presents the results of the case study.

Statistical Software Engineering

Science.gov (United States)

1998-04-13

multiversion software subject to coincident errors. IEEE Trans. Software Eng. SE-11:1511-1517. Eckhardt, D.E., A.K Caglayan, J.C. Knight, L.D. Lee, D.F...J.C. and N.G. Leveson. 1986. Experimental evaluation of the assumption of independence in multiversion software. IEEE Trans. Software

Addressing Software Engineering Issues in Real-Time Software ...

African Journals Online (AJOL)

Addressing Software Engineering Issues in Real-Time Software ... systems, manufacturing process, process control, military, space exploration, and ... but also physical properties such as timeliness, Quality of Service and reliability.

SeisCode: A seismological software repository for discovery and collaboration

Science.gov (United States)

Trabant, C.; Reyes, C. G.; Clark, A.; Karstens, R.

2012-12-01

SeisCode is a community repository for software used in seismological and related fields. The repository is intended to increase discoverability of such software and to provide a long-term home for software projects. Other places exist where seismological software may be found, but none meet the requirements necessary for an always current, easy to search, well documented, and citable resource for projects. Organizations such as IRIS, ORFEUS, and the USGS have websites with lists of available or contributed seismological software. Since the authors themselves do often not maintain these lists, the documentation often consists of a sentence or paragraph, and the available software may be outdated. Repositories such as GoogleCode and SourceForge, which are directly maintained by the authors, provide version control and issue tracking but do not provide a unified way of locating geophysical software scattered in and among countless unrelated projects. Additionally, projects are hosted at language-specific sites such as Mathworks and PyPI, in FTP directories, and in websites strewn across the Web. Search engines are only partially effective discovery tools, as the desired software is often hidden deep within the results. SeisCode provides software authors a place to present their software, codes, scripts, tutorials, and examples to the seismological community. Authors can choose their own level of involvement. At one end of the spectrum, the author might simply create a web page that points to an existing site. At the other extreme, an author may choose to leverage the many tools provided by SeisCode, such as a source code management tool with integrated issue tracking, forums, news feeds, downloads, wikis, and more. For software development projects with multiple authors, SeisCode can also be used as a central site for collaboration. SeisCode provides the community with an easy way to discover software, while providing authors a way to build a community around their

Custom software development for use in a clinical laboratory.

Science.gov (United States)

Sinard, John H; Gershkovich, Peter

2012-01-01

In-house software development for use in a clinical laboratory is a controversial issue. Many of the objections raised are based on outdated software development practices, an exaggeration of the risks involved, and an underestimation of the benefits that can be realized. Buy versus build analyses typically do not consider total costs of ownership, and unfortunately decisions are often made by people who are not directly affected by the workflow obstacles or benefits that result from those decisions. We have been developing custom software for clinical use for over a decade, and this article presents our perspective on this practice. A complete analysis of the decision to develop or purchase must ultimately examine how the end result will mesh with the departmental workflow, and custom-developed solutions typically can have the greater positive impact on efficiency and productivity, substantially altering the decision balance sheet. Involving the end-users in preparation of the functional specifications is crucial to the success of the process. A large development team is not needed, and even a single programmer can develop significant solutions. Many of the risks associated with custom development can be mitigated by a well-structured development process, use of open-source tools, and embracing an agile development philosophy. In-house solutions have the significant advantage of being adaptable to changing departmental needs, contributing to efficient and higher quality patient care.

Finding upper bounds for software failure probabilities - experiments and results

International Nuclear Information System (INIS)

Kristiansen, Monica; Winther, Rune

2005-09-01

This report looks into some aspects of using Bayesian hypothesis testing to find upper bounds for software failure probabilities. In the first part, the report evaluates the Bayesian hypothesis testing approach for finding upper bounds for failure probabilities of single software components. The report shows how different choices of prior probability distributions for a software component's failure probability influence the number of tests required to obtain adequate confidence in a software component. In the evaluation, both the effect of the shape of the prior distribution as well as one's prior confidence in the software component were investigated. In addition, different choices of prior probability distributions are discussed based on their relevance in a software context. In the second part, ideas on how the Bayesian hypothesis testing approach can be extended to assess systems consisting of multiple software components are given. One of the main challenges when assessing systems consisting of multiple software components is to include dependency aspects in the software reliability models. However, different types of failure dependencies between software components must be modelled differently. Identifying different types of failure dependencies are therefore an important condition for choosing a prior probability distribution, which correctly reflects one's prior belief in the probability for software components failing dependently. In this report, software components include both general in-house software components, as well as pre-developed software components (e.g. COTS, SOUP, etc). (Author)

ITOS to EDGE "Bridge" Software for Morpheus Lunar/Martian Vehicle

Science.gov (United States)

Hirsh, Robert; Fuchs, Jordan

2012-01-01

My project Involved Improving upon existing software and writing new software for the Project Morpheus Team. Specifically, I created and updated Integrated Test and Operations Systems (ITOS) user Interfaces for on-board Interaction with the vehicle during archive playback as well as live streaming data. These Interfaces are an integral part of the testing and operations for the Morpheus vehicle providing any and all information from the vehicle to evaluate instruments and insure coherence and control of the vehicle during Morpheus missions. I also created a "bridge" program for Interfacing "live" telemetry data with the Engineering DOUG Graphics Engine (EDGE) software for a graphical (standalone or VR dome) view of live Morpheus nights or archive replays, providing graphical representation of vehicle night and movement during subsequent tests and in real missions.

Commercial Literacy Software.

Science.gov (United States)

Balajthy, Ernest

1997-01-01

Presents the first year's results of a continuing project to monitor the availability of software of relevance for literacy education purposes. Concludes there is an enormous amount of software available for use by teachers of reading and literacy--whereas drill-and-practice software is the largest category of software available, large numbers of…

Software Quality Assurance Metrics

Science.gov (United States)

McRae, Kalindra A.

2004-01-01

Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

77 FR 16860 - Certain GPS Navigation Products, Components Thereof, and Related Software; Termination of...

Science.gov (United States)

2012-03-22

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-783] Certain GPS Navigation Products, Components Thereof, and Related Software; Termination of Investigation on the Basis of Settlement AGENCY: U.S... GPS navigation products, components thereof, and related software, by reason of the infringement of...

Essential Features for a Scholarly Journal Content Management and Peer Review Software

OpenAIRE

Fatima Sheikh Shoaie; Mehdi Husseini

2010-01-01

  The present study investigates the software used in scientific journals for content management and peer review, in order to identify the essential features. These softwares are analyzed and presented in tabular format. A questionnaire was prepared and submitted to a panel composed of 15 referees, editor in chief, software designers and researchers. The essential features for a software managing the review process were divided into three groups with populations of 10-15, 5-10 and 0-5 respect...

Software engineering

CERN Document Server

Sommerville, Ian

2016-01-01

For courses in computer science and software engineering The Fundamental Practice of Software Engineering Software Engineering introduces readers to the overwhelmingly important subject of software programming and development. In the past few years, computer systems have come to dominate not just our technological growth, but the foundations of our world's major industries. This text seeks to lay out the fundamental concepts of this huge and continually growing subject area in a clear and comprehensive manner. The Tenth Edition contains new information that highlights various technological updates of recent years, providing readers with highly relevant and current information. Sommerville's experience in system dependability and systems engineering guides the text through a traditional plan-based approach that incorporates some novel agile methods. The text strives to teach the innovators of tomorrow how to create software that will make our world a better, safer, and more advanced place to live.

Investigating nitric oxide signalling involvement in the antidepressant action of ketamine

DEFF Research Database (Denmark)

Liebenberg, Nico; Müller, Heidi Kaastrup; Elfving, Betina

2012-01-01

Stress-induced excessive glutamate transmission at N-methyl-D-aspartate receptors (NMDA-R’s) may underlie a primary mechanism in the physiology that leads to depression, and ketamine, an NMDA-R antagonist, has been shown to rapidly relieve depression in humans. A number of downstream mechanisms...... have been suggested to mediate the antidepressant action of ketamine, including the activation of extracellular-signal-regulated kinases 1/2 (ERK1/2), protein kinase B (or Akt) and the mammalian target of rapamycin (mTOR). However, the mechanism(s) that are affected immediately downstream of NMDA......-R’s remain unclear. Neuronal nitric oxide synthase (nNOS) is directly coupled to and activated by NMDA-R’s, and the uncoupling of the nNOS-NMDA-R complex prevents NMDA-R-mediated excitotoxicity. Therefore, we investigated whether the antidepressant mechanism of ketamine involves the inhibition of nitric...

Balancing technical and regulatory concerns related to testing and control of performance assessment software

International Nuclear Information System (INIS)

Seitz, R.R.; Matthews, S.D.; Kostelnik, K.M.

1990-01-01

What activities are required to assure that a performance assessment (PA) computer code operates as it is intended? Answers to this question will vary depending on the individual's area of expertise. Different perspectives on testing and control of PA software are discussed based on interpretations of the testing and control process associated with the different involved parties. This discussion leads into the presentation of a general approach to software testing and control that address regulatory requirements. Finally, the need for balance between regulatory and scientific concerns is illustrated through lessons learned in previous implementations of software testing and control programs. Configuration control and software testing are required to provide assurance that a computer code performs as intended. Configuration control provides traceability and reproducibility of results produced with PA software and provides a system to assure that users have access to the current version of the software. Software testing is conducted to assure that the computer code has been written properly, solution techniques have been properly implemented, and the software is capable of representing the behavior of the specific system to be modeled. Comprehensive software testing includes: software analysis, verification testing, benchmark testing, and site-specific calibration/validation testing

Review of Bruce A reactor regulating system software

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-01

Each of the four reactor units at the Ontario Hydro Bruce A Nuclear Generating Station is controlled by the Reactor Regulating System (RRS) software running on digital computers. This research report presents an assessment of the quality and reliability of the RRS software based on a review of the RRS design documentation, an analysis of certain significant Event Reports (SERs), and an examination of selected software changes. We found that the RRS software requirements (i.e., what the software should do) were never clearly documented, and that design documents, which should describe how the requirements are implemented, are incomplete and inaccurate. Some RRS-related SERs (i.e., reports on unexpected incidents relating to the reactor control) implied that there were faults in the RRS, or that RRS changes should be made to help prevent certain unexpected events. The follow-up investigations were generally poorly documented, and so it could not usually be determined that problems were properly resolved. The Bruce A software change control procedures require improvement. For the software changes examined, there was insufficient evidence provided by Ontario Hydro that the required procedures regarding change approval, independent review, documentation updates, and testing were followed. Ontario Hydro relies on the expertise of their technical staff to modify the RRS software correctly; they have confidence in the software code itself, even if the documentation is not up-to-date. Ontario Hydro did not produce the documentation required for an independent formal assessment of the reliability of the RRS. (author). 37 refs., 3 figs.

Review of Bruce A reactor regulating system software

International Nuclear Information System (INIS)

1995-12-01

Each of the four reactor units at the Ontario Hydro Bruce A Nuclear Generating Station is controlled by the Reactor Regulating System (RRS) software running on digital computers. This research report presents an assessment of the quality and reliability of the RRS software based on a review of the RRS design documentation, an analysis of certain significant Event Reports (SERs), and an examination of selected software changes. We found that the RRS software requirements (i.e., what the software should do) were never clearly documented, and that design documents, which should describe how the requirements are implemented, are incomplete and inaccurate. Some RRS-related SERs (i.e., reports on unexpected incidents relating to the reactor control) implied that there were faults in the RRS, or that RRS changes should be made to help prevent certain unexpected events. The follow-up investigations were generally poorly documented, and so it could not usually be determined that problems were properly resolved. The Bruce A software change control procedures require improvement. For the software changes examined, there was insufficient evidence provided by Ontario Hydro that the required procedures regarding change approval, independent review, documentation updates, and testing were followed. Ontario Hydro relies on the expertise of their technical staff to modify the RRS software correctly; they have confidence in the software code itself, even if the documentation is not up-to-date. Ontario Hydro did not produce the documentation required for an independent formal assessment of the reliability of the RRS. (author). 37 refs., 3 figs

A software product line approach to enhance a meta-scheduler middleware

International Nuclear Information System (INIS)

Scheidt, Rafael F; Schmidt, Katreen; Pessoa, Gabriel M; Viera, Matheus A; Dantas, Mario

2012-01-01

Software Projects in general tend to get more software reuse and componentization in order to reduce time, cost and new products resources. The need for techniques and tools to organize projects of higher quality in less time is one of the greatest challenges of Software Engineering. The Software Product Line is proposed to organize and systematically assist the development of new products in series at the same domain. In this context, this paper is proposed to apply the Software Product Line approach in Distributed Computing Environments. In projects that involve Distributed Environments, each version of the same product can generate repeatedly the same artifacts in a product that evolves its characteristics; however there is a principal architecture with variations of components. The goal of the proposed approach is to analyze the actual process and propose a new approach to develop new projects reusing the whole architecture, components and documents, starting with a solid base and creating new products focusing in new functionalities. We expect that with the application of this approach give support to the development of projects in Distributed Computing Environment.

Comparison of four software packages applied to a scattering problem

DEFF Research Database (Denmark)

Albertsen, Niels Christian; Chesneaux, Jean-Marie; Christiansen, Søren

1999-01-01

We investigate characteristic features of four different software packages by applying them to the numerical solution of a non-trivial physical problem in computer simulation, viz., scattering of waves from a sinusoidal boundary. The numerical method used is based on boundary collocation. This le......We investigate characteristic features of four different software packages by applying them to the numerical solution of a non-trivial physical problem in computer simulation, viz., scattering of waves from a sinusoidal boundary. The numerical method used is based on boundary collocation...

Modelo de capacitación en la línea de desarrollo de software de la empresa DESOFT (Training Approach for DESOFT software development

Directory of Open Access Journals (Sweden)

Antonio Roberto López López

2014-05-01

Full Text Available Resumen Para las empresas de desarrollo de software el capital intelectual constituye su activo más valioso, es por ello que la continua formación de sus recursos humanos, resulta imprescindible para lograr el éxito. El presente trabajo describe el modelo de capacitación en la línea de desarrollo de software implementado en la empresa DESOFT. Se enumeran las acciones de diagnóstico y de enseñanza realizadas, así como los resultados obtenidos. Abstract Nowadays, knowledge is an important asset for IT companies. Therefore, a continuing improvement of human resources is essential for success. This paper presents the training approach for developers involved on the new Desoft software project. Actions for making a diagnosis and carrying on training are described. Also, the results for the organization are showed.

Improvement of diagnostic confidence for detection of multiple myeloma involvement of the ribs by a new CT software generating rib unfolded images: Comparison with 5- and 1-mm axial images

Energy Technology Data Exchange (ETDEWEB)

Homann, Georg; Mustafa, Deedar Farhad; Nikolaou, Konstantin; Horger, Marius [Eberhard Karls University Tuebingen, Department of Diagnostic and Interventional Radiology, Tuebingen (Germany); Weisel, Katja [Eberhard Karls University Tuebingen, Department of Internal Medicine II, Tuebingen (Germany); Ditt, Hendrik [Healthcare Sector Imaging and Therapy Division, Siemens AG, Forchheim (Germany)

2015-04-02

To investigate the performance of a new CT software generating rib unfolded images for improved detection of rib osteolyses in patients with multiple myeloma. One hundred sixteen patients who underwent whole-body reduced-dose multidetector computed tomography (WBRD-MDCT) for multiple myeloma diagnosis and during follow-up were retrospectively evaluated. Nonenhanced CT scans with 5- and 1-mm slice thickness were interpreted by two readers with focus on detection of rib involvement (location, number, fracture). Image analysis of ''unfolded,'' 1-mm-based CT rib images was subsequently undertaken. We classified the number of lytic bone lesions into 0, 1, 2, <5, <10 and ≥10. For all three data sets the reading time was registered. An approximated sum of 6,727 myeloma-related rib lesions was found. On a patient-based analysis, CT (5 mm), CT (1 mm) and CT (1 mm ''unfolded rib'') yielded a sensitivity, specificity and accuracy of 79.7/94.7/87.1, 88.1/93/90.5 and 98.3/96.5/97.4, respectively. In a lesion-based analysis, the sensitivity, specificity and accuracy of the three evaluations were 69.7/87.2/70.5, 79.8/55.9/78 and 96.5/89.7/96.1. Mean reading time for 5 mm/1 mm axial images and unfolded images was 178.7/215.1/90.8 s, respectively. The generation of ''unfolded rib'' images improves detection of rib involvement in patients with multiple myeloma and significantly reduces reading time. (orig.)

The achievement and assessment of safety in systems containing software

International Nuclear Information System (INIS)

Ball, A.; Dale, C.J.; Butterfield, M.H.

1986-01-01

In order to establish confidence in the safe operation of a reactor protection system, there is a need to establish, as far as it is possible, that: (i) the algorithms used are correct; (ii) the system is a correct implementation of the algorithms; and (iii) the hardware is sufficiently reliable. This paper concentrates principally on the second of these, as it applies to the software aspect of the more accurate and complex trip functions to be performed by modern reactor protection systems. In order to engineer safety into software, there is a need to use a development strategy which will stand a high chance of achieving a correct implementation of the trip algorithms. This paper describes three broad methodologies by which it is possible to enhance the integrity of software: fault avoidance, fault tolerance and fault removal. Fault avoidance is concerned with making the software as fault free as possible by appropriate choice of specification, design and implementation methods. A fault tolerant strategy may be advisable in many safety critical applications, in order to guard against residual faults present in the software of the installed system. Fault detection and removal techniques are used to remove as many faults as possible of those introduced during software development. The paper also discusses safety and reliability assessment as it applies to software, outlining the various approaches available. Finally, there is an outline of a research project underway in the UKAEA which is intended to assess methods for developing and testing safety and protection systems involving software. (author)

Establishing software quality assurance

International Nuclear Information System (INIS)

Malsbury, J.

1983-01-01

This paper is concerned with four questions about establishing software QA: What is software QA. Why have software QA. What is the role of software QA. What is necessary to ensure the success of software QA

Who and What Does Involvement Involve?

DEFF Research Database (Denmark)

Hansen, Jeppe Oute; Petersen, Anders; Huniche, Lotte

2015-01-01

This article gives an account of aspects of a multi-sited field study of involvement of relatives in Danish psychiatry. By following metaphors of involvement across three sites of the psychiatric systema family site, a clinical site and a policy sitethe first author (J.O.) investigated how...... theoretical perspective laid out by Ernesto Laclau and Chantal Mouffe, the aim of this study is to show how the dominant discourse about involvement at the political and clinical sites is constituted by understandings of mentally ill individuals and by political objectives of involvement. The analysis...... the responsibility toward the mental health of the ill individual as well as toward the psychological milieu of the family....

Organizational Change Perspectives on Software Process Improvement

DEFF Research Database (Denmark)

Müller, Sune Dueholm; Mathiassen, Lars; Balshøj, Hans Henrik

Many software organizations have engaged in Software Process Improvement (SPI) and experienced the challenges related to managing such complex organizational change efforts. As a result, there is an increasing body of research investigating change management in SPI. To provide an overview of what......, and brain perspectives. Practitioners may use these articles as a guide to SPI insights relevant to their improvement initiatives. In contrast, the impact of culture, dominance, psychic prison, flux and transformation, and politics in SPI have only received scant attention. We argue that these perspectives...

Software Engineering and eLearning: The MuSofT Project - www.musoft.org

Directory of Open Access Journals (Sweden)

Ernst-Erich Doberkat

2005-12-01

Full Text Available eLearning supports the education in certain disciplines. Here, we report about novel eLearning concepts, techniques, and tools to support education in Software Engineering, a subdiscipline of computer science. We call this "Software Engineering eLearning". On the other side, software support is a substantial prerequisite for eLearning in any discipline. Thus, Software Engineering techniques have to be applied to develop and maintain those software systems. We call this "eLearning Software Engineering". Both aspects have been investigated in a large joint, BMBF-funded research project, termed MuSofT (Multimedia in Software Engineering. The main results are summarized in this paper.

Applied software risk management a guide for software project managers

CERN Document Server

Pandian, C Ravindranath

2006-01-01

Few software projects are completed on time, on budget, and to their original specifications. Focusing on what practitioners need to know about risk in the pursuit of delivering software projects, Applied Software Risk Management: A Guide for Software Project Managers covers key components of the risk management process and the software development process, as well as best practices for software risk identification, risk planning, and risk analysis. Written in a clear and concise manner, this resource presents concepts and practical insight into managing risk. It first covers risk-driven project management, risk management processes, risk attributes, risk identification, and risk analysis. The book continues by examining responses to risk, the tracking and modeling of risks, intelligence gathering, and integrated risk management. It concludes with details on drafting and implementing procedures. A diary of a risk manager provides insight in implementing risk management processes.Bringing together concepts ...

Software maintenance and evolution and automated software engineering

NARCIS (Netherlands)

Carver, Jeffrey C.; Serebrenik, Alexander

2018-01-01

This issue's column reports on the 33rd International Conference on Software Maintenance and Evolution and 32nd International Conference on Automated Software Engineering. Topics include flaky tests, technical debt, QA bots, and regular expressions.

Exploratory investigation of theoretical predictors of nomophobia using the Mobile Phone Involvement Questionnaire (MPIQ)

OpenAIRE

Boada-Grau, J.; Argumosa-Villar, L.; Vigil-Colet, A.

2017-01-01

Exploratory investigation of theoretical predictors of nomophobia using the Mobile Phone Involvement Questionnaire (MPIQ) DOI: 10.1016/j.adolescence.2017.02.003 URL: http://www.sciencedirect.com/science/article/pii/S0140197117300209 Filiació URV: SI Memòria Despite the advantages that the development of new technologies has brought to our lives, it is also true that the problematic use of technology can have negative effects on some people, as the prevalence of nomophobia, defi...

Reliability of software

International Nuclear Information System (INIS)

Kopetz, H.

1980-01-01

Common factors and differences in the reliability of hardware and software; reliability increase by means of methods of software redundancy. Maintenance of software for long term operating behavior. (HP) [de

Study of evaluation techniques of software testing and V and V in Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Youn, Cheong; Baek, Y. W.; Kim, H. C.; Shin, C. Y.; Park, N. J. [Chungnam Nationl Univ., Taejon (Korea, Republic of)

2000-03-15

The study of activities to solve software safety and quality must be executed in base of establishing software development process for digitalized nuclear plant. Especially study of software testing and verification and validation must executed. For this purpose methodologies and tools which can improve software qualities are evaluated and software testing and V and V which can be applied to software life cycle are investigated. This study establish a guideline that can assure software safety and reliability requirements in digitalized nuclear plant systems and can be used as a guidebook of software development process to assure software quality many software development organization.

Development of software-hardware complex for investigation of the vector field of speeds in the cyclone-separator

Science.gov (United States)

Borisov, A.

2018-05-01

The current issue of studying the vector velocity field in a cyclone-separator with a screw insert is considered in the article. Modeling of the velocity vector field in SolidWorks was carried out, tangential, axial and radial velocities were investigated. Also, a software and hardware complex was developed that makes it possible to obtain data on the speed inside a cyclone separator. The results of the experiment showed that on flour dusts the efficiency of the cyclone separator in question was more than 99.5%, with an air flow rate of 376 m3 / h, 472 m3 / h and 516 m3 / h, and ΔP less than 600 Pa. The velocity in the inlet branch of the screw insert was 18-20 m / s, and at the exit of the screw insert the airflow velocity is 50-70 m / s.

Impact of Internet of Things on Software Business Model and Software Industry

OpenAIRE

Murari, Bhanu Teja

2016-01-01

Context: Internet of things (IoT) technology is rapidly increasing and changes the business environment for a software organization. There is a need to understand what are important factors of business model should a software company focus on obtaining benefits from the potential that IoT offers. This thesis also focuses on finding the impact of IoT on software business model and software industry especially on software development. Objectives: In this thesis, we do research on IoT software b...

The Software Invention Cube: A classification scheme for software inventions

NARCIS (Netherlands)

Bergstra, J.A.; Klint, P.

2008-01-01

The patent system protects inventions. The requirement that a software invention should make ‘a technical contribution’ turns out to be untenable in practice and this raises the question, what constitutes an invention in the realm of software. The authors developed the Software Invention Cube

Object oriented software development in the atlas collaboration

International Nuclear Information System (INIS)

Schaffer, A.

1994-01-01

For more than a year a group within the Atlas Collaboration has been investigating the possibilities of the application of object oriented methodology and program development to the software of Atlas. Recently this group has been joined by members of the CMS Collaboration in the submission of a proposal to the DRDC at CERN to find a common solution for the software development environment for LHC. This talk will discuss the progress achieved so far and the future perspective

Confirmatory Factor Analysis Alternative: Free, Accessible CBID Software.

Science.gov (United States)

Bott, Marjorie; Karanevich, Alex G; Garrard, Lili; Price, Larry R; Mudaranthakam, Dinesh Pal; Gajewski, Byron

2018-02-01

New software that performs Classical and Bayesian Instrument Development (CBID) is reported that seamlessly integrates expert (content validity) and participant data (construct validity) to produce entire reliability estimates with smaller sample requirements. The free CBID software can be accessed through a website and used by clinical investigators in new instrument development. Demonstrations are presented of the three approaches using the CBID software: (a) traditional confirmatory factor analysis (CFA), (b) Bayesian CFA using flat uninformative prior, and (c) Bayesian CFA using content expert data (informative prior). Outcomes of usability testing demonstrate the need to make the user-friendly, free CBID software available to interdisciplinary researchers. CBID has the potential to be a new and expeditious method for instrument development, adding to our current measurement toolbox. This allows for the development of new instruments for measuring determinants of health in smaller diverse populations or populations of rare diseases.

Techniques to maximize software reliability in radiation fields

International Nuclear Information System (INIS)

Eichhorn, G.; Piercey, R.B.

1986-01-01

Microprocessor system failures due to memory corruption by single event upsets (SEUs) and/or latch-up in RAM or ROM memory are common in environments where there is high radiation flux. Traditional methods to harden microcomputer systems against SEUs and memory latch-up have usually involved expensive large scale hardware redundancy. Such systems offer higher reliability, but they tend to be more complex and non-standard. At the Space Astronomy Laboratory the authors have developed general programming techniques for producing software which is resistant to such memory failures. These techniques, which may be applied to standard off-the-shelf hardware, as well as custom designs, include an implementation of Maximally Redundant Software (MRS) model, error detection algorithms and memory verification and management

Radiobiology software for educational purpose

International Nuclear Information System (INIS)

Pandey, A.K.; Sharma, S.K.; Kumar, R.; Bal, C.S.; Nair, O.; Haresh, K.P.; Julka, P.K.

2014-01-01

To understand radio-nuclide therapy and the basis of radiation protection, it is essential to understand radiobiology. With limited time for classroom teaching and limited time and resources for radiobiology experiments students do not acquire firm grasp of theoretical mathematical models and experimental knowledge of target theory and Linear quadratic models that explain nature of cell survival curves. We believe that this issue might be addressed with numerical simulation of cell survival curves using mathematical models. Existing classroom teaching can be reoriented to understand the subject using the concept of modeling, simulation and virtual experiments. After completion of the lecture, students can practice with simulation tool at their convenient time. In this study we have developed software that can help the students to acquire firm grasp of theoretical and experimental radiobiology. The software was developed using FreeMat ver 4.0, open source software. Target theory, linear quadratic model, cell killing based on Poisson model have been included. The implementation of the program structure was to display the menu for the user choice to be made and then program flows depending on the users choice. The program executes by typing 'Radiobiology' on the command line interface. Students can investigate the effect of radiation dose on cell, interactively. They can practice to draw the cell survival curve based on the input and output data and they can also compare their handmade graphs with automatically generated graphs by the program. This software is in the early stage of development and will evolve on user feedback. We feel this simulation software will be quite useful for students entering in the nuclear medicine, radiology and radiotherapy disciplines. (author)

The Solid* toolset for software visual analytics of program structure and metrics comprehension : From research prototype to product

NARCIS (Netherlands)

Reniers, Dennie; Voinea, Lucian; Ersoy, Ozan; Telea, Alexandru

2014-01-01

Software visual analytics (SVA) tools combine static program analysis and fact extraction with information visualization to support program comprehension. However, building efficient and effective SVA tools is highly challenging, as it involves extensive software development in program analysis,

Application of software technology to a future spacecraft computer design

Science.gov (United States)

Labaugh, R. J.

1980-01-01

A study was conducted to determine how major improvements in spacecraft computer systems can be obtained from recent advances in hardware and software technology. Investigations into integrated circuit technology indicated that the CMOS/SOS chip set being developed for the Air Force Avionics Laboratory at Wright Patterson had the best potential for improving the performance of spaceborne computer systems. An integral part of the chip set is the bit slice arithmetic and logic unit. The flexibility allowed by microprogramming, combined with the software investigations, led to the specification of a baseline architecture and instruction set.

Review of Quantitative Software Reliability Methods

Energy Technology Data Exchange (ETDEWEB)

Chu, T.L.; Yue, M.; Martinez-Guridi, M.; Lehner, J.

2010-09-17

The current U.S. Nuclear Regulatory Commission (NRC) licensing process for digital systems rests on deterministic engineering criteria. In its 1995 probabilistic risk assessment (PRA) policy statement, the Commission encouraged the use of PRA technology in all regulatory matters to the extent supported by the state-of-the-art in PRA methods and data. Although many activities have been completed in the area of risk-informed regulation, the risk-informed analysis process for digital systems has not yet been satisfactorily developed. Since digital instrumentation and control (I&C) systems are expected to play an increasingly important role in nuclear power plant (NPP) safety, the NRC established a digital system research plan that defines a coherent set of research programs to support its regulatory needs. One of the research programs included in the NRC's digital system research plan addresses risk assessment methods and data for digital systems. Digital I&C systems have some unique characteristics, such as using software, and may have different failure causes and/or modes than analog I&C systems; hence, their incorporation into NPP PRAs entails special challenges. The objective of the NRC's digital system risk research is to identify and develop methods, analytical tools, and regulatory guidance for (1) including models of digital systems into NPP PRAs, and (2) using information on the risks of digital systems to support the NRC's risk-informed licensing and oversight activities. For several years, Brookhaven National Laboratory (BNL) has worked on NRC projects to investigate methods and tools for the probabilistic modeling of digital systems, as documented mainly in NUREG/CR-6962 and NUREG/CR-6997. However, the scope of this research principally focused on hardware failures, with limited reviews of software failure experience and software reliability methods. NRC also sponsored research at the Ohio State University investigating the modeling of

Emerging role of bioinformatics tools and software in evolution of clinical research

Directory of Open Access Journals (Sweden)

Supreet Kaur Gill

2016-01-01

Full Text Available Clinical research is making toiling efforts for promotion and wellbeing of the health status of the people. There is a rapid increase in number and severity of diseases like cancer, hepatitis, HIV etc, resulting in high morbidity and mortality. Clinical research involves drug discovery and development whereas clinical trials are performed to establish safety and efficacy of drugs. Drug discovery is a long process starting with the target identification, validation and lead optimization. This is followed by the preclinical trials, intensive clinical trials and eventually post marketing vigilance for drug safety. Softwares and the bioinformatics tools play a great role not only in the drug discovery but also in drug development. It involves the use of informatics in the development of new knowledge pertaining to health and disease, data management during clinical trials and to use clinical data for secondary research. In addition, new technology likes molecular docking, molecular dynamics simulation, proteomics and quantitative structure activity relationship in clinical research results in faster and easier drug discovery process. During the preclinical trials, the software is used for randomization to remove bias and to plan study design. In clinical trials software like electronic data capture, Remote data capture and electronic case report form (eCRF is used to store the data. eClinical, Oracle clinical are software used for clinical data management and for statistical analysis of the data. After the drug is marketed the safety of a drug could be monitored by drug safety software like Oracle Argus or ARISg. Therefore, softwares are used from the very early stages of drug designing, to drug development, clinical trials and during pharmacovigilance. This review describes different aspects related to application of computers and bioinformatics in drug designing, discovery and development, formulation designing and clinical research.

Quality factors in the life cycle of software oriented to safety systems in nuclear power plants

International Nuclear Information System (INIS)

Nunez McLeod, J.E.; Rivera, S.S.

1997-01-01

The inclusion of software in safety related systems for nuclear power plants, makes it necessary to include the software quality assurance concept. The software quality can be defined as the adjustment degree between the software and the specified requirements and user expectations. To guarantee a certain software quality level it is necessary to make a systematic and planned set of tasks, that constitute a software quality guaranty plan. The application of such a plan involves activities that should be performed all along the software life cycle, and that can be evaluated through the so called quality factors, due to the fact that the quality itself cannot be directly measured, but indirectly as some of it manifestations. In this work, a software life cycle model is proposed, for nuclear power plant safety related systems. A set os software quality factors is also proposed , with its corresponding classification according to the proposed model. (author) [es

Model-integrating software components engineering flexible software systems

CERN Document Server

Derakhshanmanesh, Mahdi

2015-01-01

In his study, Mahdi Derakhshanmanesh builds on the state of the art in modeling by proposing to integrate models into running software on the component-level without translating them to code. Such so-called model-integrating software exploits all advantages of models: models implicitly support a good separation of concerns, they are self-documenting and thus improve understandability and maintainability and in contrast to model-driven approaches there is no synchronization problem anymore between the models and the code generated from them. Using model-integrating components, software will be

Software engineering the current practice

CERN Document Server

Rajlich, Vaclav

2011-01-01

INTRODUCTION History of Software EngineeringSoftware PropertiesOrigins of SoftwareBirth of Software EngineeringThird Paradigm: Iterative ApproachSoftware Life Span ModelsStaged ModelVariants of Staged ModelSoftware Technologies Programming Languages and CompilersObject-Oriented TechnologyVersion Control SystemSoftware ModelsClass DiagramsUML Activity DiagramsClass Dependency Graphs and ContractsSOFTWARE CHANGEIntroduction to Software ChangeCharacteristics of Software ChangePhases of Software ChangeRequirements and Their ElicitationRequirements Analysis and Change InitiationConcepts and Concept

A Quantitative Study of Global Software Development Teams, Requirements, and Software Projects

Science.gov (United States)

Parker, Linda L.

2016-01-01

The study explored the relationship between global software development teams, effective software requirements, and stakeholders' perception of successful software development projects within the field of information technology management. It examined the critical relationship between Global Software Development (GSD) teams creating effective…

Possibilities and Limitations of Applying Software Reliability Growth Models to Safety- Critical Software

International Nuclear Information System (INIS)

Kim, Man Cheol; Jang, Seung Cheol; Ha, Jae Joo

2006-01-01

As digital systems are gradually introduced to nuclear power plants (NPPs), the need of quantitatively analyzing the reliability of the digital systems is also increasing. Kang and Sung identified (1) software reliability, (2) common-cause failures (CCFs), and (3) fault coverage as the three most critical factors in the reliability analysis of digital systems. For the estimation of the safety-critical software (the software that is used in safety-critical digital systems), the use of Bayesian Belief Networks (BBNs) seems to be most widely used. The use of BBNs in reliability estimation of safety-critical software is basically a process of indirectly assigning a reliability based on various observed information and experts' opinions. When software testing results or software failure histories are available, we can use a process of directly estimating the reliability of the software using various software reliability growth models such as Jelinski- Moranda model and Goel-Okumoto's nonhomogeneous Poisson process (NHPP) model. Even though it is generally known that software reliability growth models cannot be applied to safety-critical software due to small number of expected failure data from the testing of safety-critical software, we try to find possibilities and corresponding limitations of applying software reliability growth models to safety critical software

A Software Rejuvenation Framework for Distributed Computing

Science.gov (United States)

Chau, Savio

2009-01-01

A performability-oriented conceptual framework for software rejuvenation has been constructed as a means of increasing levels of reliability and performance in distributed stateful computing. As used here, performability-oriented signifies that the construction of the framework is guided by the concept of analyzing the ability of a given computing system to deliver services with gracefully degradable performance. The framework is especially intended to support applications that involve stateful replicas of server computers.

Enterprise network with software Asterisk PBX based on the PLC technology

Directory of Open Access Journals (Sweden)

Michal Maar

2017-01-01

Full Text Available This article presents the software Asterisk PBX solution design in enterprise PLC network (Power Line Communication. The description of the installation and configuration of software Asterisk PBX is involved in the design. The secure interconnection of two enterprise PLC network is implemented via the telecommunication tunnel with security grant using the Cisco routers. The connection between two Asterisk PBXs is designed in context of the establishment of the tunnel. The subject of the article is also cross/connection of exchanges Asterisk PBX and hardware PBX - IP Panasonic PBX K-NS500.

Use of operational data for the assessment of pre-existing software

International Nuclear Information System (INIS)

Helminen, Atte; Gran, Bjoern Axel; Kristiansen, Monica; Winther, Rune

2004-01-01

To build sufficient confidence on the reliability of the safety systems of nuclear power plants all available sources of information should be used. One important data source is the operational experience collected for the system. The operational experience is particularly applicable for systems of pre-existing software. Even though systems and devices involving pre-existing software are not considered for the functions of highest safety levels of nuclear power plants, they will most probably be introduced to functions of lower safety levels and to none-safety related applications. In the paper we shortly discuss the use of operational experience data for the reliability assessment of pre-existing software in general, and the role of pre-existing software in relation to safety applications. Then we discuss the modelling of operational profiles, the application of expert judgement on operational profiles and the need of a realistic test case. Finally, we discuss the application of operational experience data in Bayesian statistics. (Author)

Software Assurance Competency Model

Science.gov (United States)

2013-03-01

COTS) software , and software as a service ( SaaS ). L2: Define and analyze risks in the acquisition of contracted software , COTS software , and SaaS ...2010a]: Application of technologies and processes to achieve a required level of confidence that software systems and services function in the...

A review on software testing approaches for cloud applications

Directory of Open Access Journals (Sweden)

Tamanna Siddiqui

2016-09-01

Full Text Available Cloud computing has actually been invented to be the latest computing standard that will work several distinctive research areas, such as software testing. Testing cloud applications will keep its unique characteristics that involve more recent testing techniques. Software testing helps to reduce the need for hardware and software services and also provide adaptable and valuable cloud platform. Testing within the cloud platform is easily manageable based on new test models and criteria. Prioritization approach is made responsive to build much better relationship between test cases. These test cases are clustered dependent on priority level. The resources can be used properly by applying load balancing algorithm. Cloud guarantees maximum usage of existing resources. But, security defined as a primary problem in cloud. At the present time, organizations are progressively moving excited about deploying and making use of ready-prepared business applications, with particular short-term to the marketplace. The possible lack of capital budgets for software planning and on principle deployments, along with the swift progression of cloud these are the reasons why one should make the interest on business application. However, these are the interests that help make the SaaS based business application on-demand. In this paper different approaches has been discussed that will help to extend the cloud environment. Also, the study of several well-known software testing approaches.

ESTSC - Software Best Practices

Science.gov (United States)

DOE Scientific and Technical Software Best Practices December 2010 Table of Contents 1.0 Introduction 2.0 Responsibilities 2.1 OSTI/ESTSC 2.2 SIACs 2.3 Software Submitting Sites/Creators 2.4 Software Sensitivity Review 3.0 Software Announcement and Submission 3.1 STI Software Appropriate for Announcement 3.2

Ability-Based View in Action: A Software Corporation Study

Directory of Open Access Journals (Sweden)

Farley Simon Nobre

2014-04-01

Full Text Available This research investigates antecedents, developments and consequences of dynamic capabilities in an organization. It contributes by searching theoretical and empirical answers to the questions: (a What are the antecedents which can provide an organization with dynamic and ordinary capabilities?; (b How do these antecedents contribute to create capabilities in an organization?; (c How do they affect an organization’s competitive advantage?; (d Can we assess and measure the antecedents and consequences to an organization? From a first (theoretical perspective, this paper searches answers to the first, second and third questions by reviewing concepts of an ability-based view of organizations that involves the abilities of cognition, intelligence, autonomy, learning and knowledge management, and which contributes to explain the dynamic behavior of the firm in the pursuit of competitive advantage. From a second (empirical perspective, this paper reinforces and delivers findings to the second, third and fourth questions by presenting a case study that evidences the ability-based view in action in a software corporation, where it contributes by investigating: (a the development of organizational capabilities; (b the effects of the new capabilities on the organization; and (c the assessment and measurement of the abilities and consequences.

Factors that motivate software developers in Nigerian's software ...

African Journals Online (AJOL)

It was also observed those courtesy, good reward systems, regular training, recognition, tolerance of mistakes and good leadership were high motivators of software developers. Keywords: Software developers, information technology, project managers, Nigeria International Journal of Natural and Applied Sciences, 6(4): ...

Software for Optimizing Quality Assurance of Other Software

Science.gov (United States)

Feather, Martin; Cornford, Steven; Menzies, Tim

2004-01-01

Software assurance is the planned and systematic set of activities that ensures that software processes and products conform to requirements, standards, and procedures. Examples of such activities are the following: code inspections, unit tests, design reviews, performance analyses, construction of traceability matrices, etc. In practice, software development projects have only limited resources (e.g., schedule, budget, and availability of personnel) to cover the entire development effort, of which assurance is but a part. Projects must therefore select judiciously from among the possible assurance activities. At its heart, this can be viewed as an optimization problem; namely, to determine the allocation of limited resources (time, money, and personnel) to minimize risk or, alternatively, to minimize the resources needed to reduce risk to an acceptable level. The end result of the work reported here is a means to optimize quality-assurance processes used in developing software.

Gammasphere software development

International Nuclear Information System (INIS)

Piercey, R.B.

1994-01-01

This report describes the activities of the nuclear physics group at Mississippi State University which were performed during 1993. Significant progress has been made in the focus areas: chairing the Gammasphere Software Working Group (SWG); assisting with the porting and enhancement of the ORNL UPAK histogramming software package; and developing standard formats for Gammasphere data products. In addition, they have established a new public ftp archive to distribute software and software development tools and information

Neutron Scattering Software

Science.gov (United States)

Home Page | Facilities | Reference | Software | Conferences | Announcements | Mailing Lists Neutron Scattering Banner Neutron Scattering Software A new portal for neutron scattering has just been established sets KUPLOT: data plotting and fitting software ILL/TAS: Matlab probrams for analyzing triple axis data

Software To Go: A Catalog of Software Available for Loan.

Science.gov (United States)

Kurlychek, Ken, Comp.

This catalog lists the holdings of the Software To Go software lending library and clearinghouse for programs and agencies serving students or clients who are deaf or hard of hearing. An introduction describes the clearinghouse and its collection of software, much of it commercial and copyrighted material, for Apple, Macintosh, and IBM (MS-DOS)…

Effect of Software Version on the Accuracy of an Intraoral Scanning Device.

Science.gov (United States)

Haddadi, Yasser; Bahrami, Golnosh; Isidor, Flemming

2018-04-06

To investigate the impact of software version on the accuracy of an intraoral scanning device. A master tooth was scanned with a high-precision optical scanner and then 10 times with a CEREC Omnicam scanner with software versions 4.4.0 and 4.4.4. Discrepancies were measured using quality control software. Mean deviation for 4.4.0 was 36.2 ± 35 μm and for 4.4.4 was 20.7 ± 14.2 μm (P ≤ .001). Software version has a significant impact on the accuracy of an intraoral scanner. It is important that researchers also publish the software version of scanners when publishing their findings.

Observation-Driven Configuration of Complex Software Systems

Science.gov (United States)

Sage, Aled

2010-06-01

The ever-increasing complexity of software systems makes them hard to comprehend, predict and tune due to emergent properties and non-deterministic behaviour. Complexity arises from the size of software systems and the wide variety of possible operating environments: the increasing choice of platforms and communication policies leads to ever more complex performance characteristics. In addition, software systems exhibit different behaviour under different workloads. Many software systems are designed to be configurable so that policies can be chosen to meet the needs of various stakeholders. For complex software systems it can be difficult to accurately predict the effects of a change and to know which configuration is most appropriate. This thesis demonstrates that it is useful to run automated experiments that measure a selection of system configurations. Experiments can find configurations that meet the stakeholders' needs, find interesting behavioural characteristics, and help produce predictive models of the system's behaviour. The design and use of ACT (Automated Configuration Tool) for running such experiments is described, in combination a number of search strategies for deciding on the configurations to measure. Design Of Experiments (DOE) is discussed, with emphasis on Taguchi Methods. These statistical methods have been used extensively in manufacturing, but have not previously been used for configuring software systems. The novel contribution here is an industrial case study, applying the combination of ACT and Taguchi Methods to DC-Directory, a product from Data Connection Ltd (DCL). The case study investigated the applicability of Taguchi Methods for configuring complex software systems. Taguchi Methods were found to be useful for modelling and configuring DC- Directory, making them a valuable addition to the techniques available to system administrators and developers.

Big data and software defined networks

CERN Document Server

Taheri, Javid

2018-01-01

Big Data Analytics and Software Defined Networking (SDN) are helping to drive the management of data usage of the extraordinary increase of computer processing power provided by Cloud Data Centres (CDCs). This new book investigates areas where Big-Data and SDN can help each other in delivering more efficient services.

Matrix based problem detection in the application of software process patterns

NARCIS (Netherlands)

Amrit, Chintan; Hillegersberg, Jos Van

2007-01-01

Software development is rarely an individual effort and generally involves teams of developers. Such col- laborations require proper communication and regular coordination among the team members. In addition, coordination is required to sort out problems due to technical dependencies that exist when

75 FR 8400 - In the Matter of Certain Wireless Communications System Server Software, Wireless Handheld...

Science.gov (United States)

2010-02-24

... Communications System Server Software, Wireless Handheld Devices and Battery Packs; Notice of Investigation... within the United States after importation of certain wireless communications system server software... certain wireless communications system server software, wireless handheld devices or battery packs that...

Ontario Hydro experience in the identification and mitigation of potential failures in safety critical software systems

International Nuclear Information System (INIS)

Huget, R.G.; Viola, M.; Froebel, P.A.

1995-01-01

Ontario Hydro has had experience in designing and qualifying safety critical software used in the reactor shutdown systems of its nuclear generating stations. During software design, an analysis of system level hazards and potential hardware failure effects provide input to determining what safeguards will be needed. One form of safeguard, called software self checks, continually monitor the health of the computer on line. The design of self checks usually is a trade off between the amount of computing resources required, the software complexity, and the level of safeguarding provided. As part of the software verification activity, a software hazards analysis is performed, which identifiers any failure modes that could lead to the software causing an unsafe state, and which recommends changes to mitigate that potential. These recommendations may involve a re-structuring of the software to be more resistant to failure, or the introduction of other safeguarding measures. This paper discusses how Ontario Hydro has implemented these aspects of software design and verification into safety critical software used in reactor shutdown systems

Investigating discrimination model of the signals obtained by eddy current testing

International Nuclear Information System (INIS)

Wache, G.; Rivenez, J.

1986-01-01

A software using an eddy current system controlled by a desk computer has been developed in order to separate a characteristic physical value among several parts. The numerical process involved uses multiparameter measurements done previously on significant parts belonging to the same class. The analysis presented deals with hardness testing of steel bolts in relation with heat-treatment, but other applications dealing with either micro structure check or defect investigation, could be done in the future by using a similar method

Computer Software Configuration Item-Specific Flight Software Image Transfer Script Generator

Science.gov (United States)

Bolen, Kenny; Greenlaw, Ronald

2010-01-01

A K-shell UNIX script enables the International Space Station (ISS) Flight Control Team (FCT) operators in NASA s Mission Control Center (MCC) in Houston to transfer an entire or partial computer software configuration item (CSCI) from a flight software compact disk (CD) to the onboard Portable Computer System (PCS). The tool is designed to read the content stored on a flight software CD and generate individual CSCI transfer scripts that are capable of transferring the flight software content in a given subdirectory on the CD to the scratch directory on the PCS. The flight control team can then transfer the flight software from the PCS scratch directory to the Electronically Erasable Programmable Read Only Memory (EEPROM) of an ISS Multiplexer/ Demultiplexer (MDM) via the Indirect File Transfer capability. The individual CSCI scripts and the CSCI Specific Flight Software Image Transfer Script Generator (CFITSG), when executed a second time, will remove all components from their original execution. The tool will identify errors in the transfer process and create logs of the transferred software for the purposes of configuration management.

Design, Development and Pre-Flight Testing of the Communications, Navigation, and Networking Reconfigurable Testbed (Connect) to Investigate Software Defined Radio Architecture on the International Space Station

Science.gov (United States)

Over, Ann P.; Barrett, Michael J.; Reinhart, Richard C.; Free, James M.; Cikanek, Harry A., III

2011-01-01

The Communication Navigation and Networking Reconfigurable Testbed (CoNNeCT) is a NASA-sponsored mission, which will investigate the usage of Software Defined Radios (SDRs) as a multi-function communication system for space missions. A softwaredefined radio system is a communication system in which typical components of the system (e.g., modulators) are incorporated into software. The software-defined capability allows flexibility and experimentation in different modulation, coding and other parameters to understand their effects on performance. This flexibility builds inherent redundancy and flexibility into the system for improved operational efficiency, real-time changes to space missions and enhanced reliability/redundancy. The CoNNeCT Project is a collaboration between industrial radio providers and NASA. The industrial radio providers are providing the SDRs and NASA is designing, building and testing the entire flight system. The flight system will be integrated on the Express Logistics Carrier (ELC) on the International Space Station (ISS) after launch on the H-IIB Transfer Vehicle in 2012. This paper provides an overview of the technology research objectives, payload description, design challenges and pre-flight testing results.

Software Engineering Improvement Plan

Science.gov (United States)

2006-01-01

In performance of this task order, bd Systems personnel provided support to the Flight Software Branch and the Software Working Group through multiple tasks related to software engineering improvement and to activities of the independent Technical Authority (iTA) Discipline Technical Warrant Holder (DTWH) for software engineering. To ensure that the products, comments, and recommendations complied with customer requirements and the statement of work, bd Systems personnel maintained close coordination with the customer. These personnel performed work in areas such as update of agency requirements and directives database, software effort estimation, software problem reports, a web-based process asset library, miscellaneous documentation review, software system requirements, issue tracking software survey, systems engineering NPR, and project-related reviews. This report contains a summary of the work performed and the accomplishments in each of these areas.

Questioning the Role of Requirements Engineering in the Causes of Safety-Critical Software Failures

Science.gov (United States)

Johnson, C. W.; Holloway, C. M.

2006-01-01

Many software failures stem from inadequate requirements engineering. This view has been supported both by detailed accident investigations and by a number of empirical studies; however, such investigations can be misleading. It is often difficult to distinguish between failures in requirements engineering and problems elsewhere in the software development lifecycle. Further pitfalls arise from the assumption that inadequate requirements engineering is a cause of all software related accidents for which the system fails to meet its requirements. This paper identifies some of the problems that have arisen from an undue focus on the role of requirements engineering in the causes of major accidents. The intention is to provoke further debate within the emerging field of forensic software engineering.

Software quality assurance and software safety in the Biomed Control System

International Nuclear Information System (INIS)

Singh, R.P.; Chu, W.T.; Ludewigt, B.A.; Marks, K.M.; Nyman, M.A.; Renner, T.R.; Stradtner, R.

1989-01-01

The Biomed Control System is a hardware/software system used for the delivery, measurement and monitoring of heavy-ion beams in the patient treatment and biology experiment rooms in the Bevalac at the Lawrence Berkeley Laboratory (LBL). This paper describes some aspects of this system including historical background philosophy, configuration management, hardware features that facilitate software testing, software testing procedures, the release of new software quality assurance, safety and operator monitoring. 3 refs

Simplex GPS and InSAR Inversion Software

Science.gov (United States)

Donnellan, Andrea; Parker, Jay W.; Lyzenga, Gregory A.; Pierce, Marlon E.

2012-01-01

Changes in the shape of the Earth's surface can be routinely measured with precisions better than centimeters. Processes below the surface often drive these changes and as a result, investigators require models with inversion methods to characterize the sources. Simplex inverts any combination of GPS (global positioning system), UAVSAR (uninhabited aerial vehicle synthetic aperture radar), and InSAR (interferometric synthetic aperture radar) data simultaneously for elastic response from fault and fluid motions. It can be used to solve for multiple faults and parameters, all of which can be specified or allowed to vary. The software can be used to study long-term tectonic motions and the faults responsible for those motions, or can be used to invert for co-seismic slip from earthquakes. Solutions involving estimation of fault motion and changes in fluid reservoirs such as magma or water are possible. Any arbitrary number of faults or parameters can be considered. Simplex specifically solves for any of location, geometry, fault slip, and expansion/contraction of a single or multiple faults. It inverts GPS and InSAR data for elastic dislocations in a half-space. Slip parameters include strike slip, dip slip, and tensile dislocations. It includes a map interface for both setting up the models and viewing the results. Results, including faults, and observed, computed, and residual displacements, are output in text format, a map interface, and can be exported to KML. The software interfaces with the QuakeTables database allowing a user to select existing fault parameters or data. Simplex can be accessed through the QuakeSim portal graphical user interface or run from a UNIX command line.

Guidelines for evaluating software configuration management plans for digital instrumentation and control systems

International Nuclear Information System (INIS)

Cheon, Se Woo; Park, Jong Kyun; Lee, Ki Young; Lee, Jang Soo; Kim, Jang Yeon

2001-08-01

Software configuration management (SCM) is the process for identifying software configuration items (CIs), controlling the implementation and changes to software, recording and reporting the status of changes, and verifying the completeness and correctness of the released software. SCM consists of two major aspects: planning and implementation. Effective SCM involves planning for how activities are to be performed, and performing these activities in accordance with the Plan. This report first reviews the background of SCM that include key standards, SCM disciplines, SCM basic functions, baselines, software entity, SCM process, the implementation of SCM, and the tools of SCM. In turn, the report provides the guidelines for evaluating the SCM Plan for digital I and C systems of nuclear power plants. Most of the guidelines in the report are based on IEEE Std 828 and ANSI/IEEE Std 1042. According to BTP-14, NUREG-0800, the evaluation topics on the SCM Plan is classified into three categories: management, implementation, and resource characteristics

New AICPA standards aid accounting for the costs of internal-use software.

Science.gov (United States)

Luecke, R W; Meeting, D T; Klingshirn, R G

1999-05-01

Statement of Position (SOP) No. 98-1, "Accounting for the Costs of Computer Software Developed or Obtained for Internal Use," issued by the American Institute of Certified Public Accountants in March 1998, provides financial managers with guidelines regarding which costs involved in developing or obtaining internal-use software should be expensed and which should be capitalized. The SOP identifies three stages in the development of internal-use software: the preliminary project stage, the application development stage, and the postimplementation-operation stage. The SOP provides that all costs incurred during the preliminary project stage should be expensed as incurred. During the application development stage, costs associated with developing or obtaining the software should be capitalized, while costs associated with preparing data for use within the new system should be expensed. Costs incurred during the postimplementation-operation stage, typically associated with training and application maintenance, should be expensed.

Computer application in scientific investigations

International Nuclear Information System (INIS)

Govorun, N.N.

1981-01-01

A short review of the computer development and application and software in JINR for the last 15 years is presented. Main trends of studies on computer application in experimental and theoretical investigations are enumerated: software of computers and their systems, software of data processing systems, designing automatic and automized systems for measuring track detectors images, development of technique of carrying out experiments on computer line, packets of applied computer codes and specialized systems. The development of the on line technique is successfully used in investigations of nuclear processes at relativistic energies. The new trend is the development of television methods of data output and its computer recording [ru

Parent Involvement: Investigating the Parent-Child Relationship in Millennial College Students

Science.gov (United States)

Pizzolato, Jane Elizabeth; Hicklen, Sherrell

2011-01-01

There is evidence of a surge in parent involvement in postsecondary education, and some scholarship suggests that this high level of parent involvement may inhibit epistemological development. Despite these claims, there is little empirical evidence on the level or impact of parent involvement during the college years. The aim of this research was…

The dynamic of modern software development project management and the software crisis of quality. An integrated system dynamics approach towards software quality improvement

OpenAIRE

Nasirikaljahi, Armindokht

2012-01-01

The software industry is plagued by cost-overruns, delays, poor customer satisfaction and quality issues that are costing clients and customers world-wide billions of dollars each year. The phenomenon is coined The Software Crisis", and poses a huge challenge for software project management. This thesis addresses one of the core issues of the software crisis, namely software quality. The challenges of software quality are central for understanding the other symptoms of the software crisis. Th...

Software architecture 2

CERN Document Server

Oussalah, Mourad Chabanne

2014-01-01

Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural templa

Software architecture 1

CERN Document Server

Oussalah , Mourad Chabane

2014-01-01

Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural template

NASA's Software Safety Standard

Science.gov (United States)

Ramsay, Christopher M.

2007-01-01

NASA relies more and more on software to control, monitor, and verify its safety critical systems, facilities and operations. Since the 1960's there has hardly been a spacecraft launched that does not have a computer on board that will provide command and control services. There have been recent incidents where software has played a role in high-profile mission failures and hazardous incidents. For example, the Mars Orbiter, Mars Polar Lander, the DART (Demonstration of Autonomous Rendezvous Technology), and MER (Mars Exploration Rover) Spirit anomalies were all caused or contributed to by software. The Mission Control Centers for the Shuttle, ISS, and unmanned programs are highly dependant on software for data displays, analysis, and mission planning. Despite this growing dependence on software control and monitoring, there has been little to no consistent application of software safety practices and methodology to NASA's projects with safety critical software. Meanwhile, academia and private industry have been stepping forward with procedures and standards for safety critical systems and software, for example Dr. Nancy Leveson's book Safeware: System Safety and Computers. The NASA Software Safety Standard, originally published in 1997, was widely ignored due to its complexity and poor organization. It also focused on concepts rather than definite procedural requirements organized around a software project lifecycle. Led by NASA Headquarters Office of Safety and Mission Assurance, the NASA Software Safety Standard has recently undergone a significant update. This new standard provides the procedures and guidelines for evaluating a project for safety criticality and then lays out the minimum project lifecycle requirements to assure the software is created, operated, and maintained in the safest possible manner. This update of the standard clearly delineates the minimum set of software safety requirements for a project without detailing the implementation for those

Software requirements

CERN Document Server

Wiegers, Karl E