WorldWideScience

Sample records for software engineering methodologies

  1. Software engineering methodologies and tools

    Science.gov (United States)

    Wilcox, Lawrence M.

    1993-01-01

    Over the years many engineering disciplines have developed, including chemical, electronic, etc. Common to all engineering disciplines is the use of rigor, models, metrics, and predefined methodologies. Recently, a new engineering discipline has appeared on the scene, called software engineering. For over thirty years computer software has been developed and the track record has not been good. Software development projects often miss schedules, are over budget, do not give the user what is wanted, and produce defects. One estimate is there are one to three defects per 1000 lines of deployed code. More and more systems are requiring larger and more complex software for support. As this requirement grows, the software development problems grow exponentially. It is believed that software quality can be improved by applying engineering principles. Another compelling reason to bring the engineering disciplines to software development is productivity. It has been estimated that productivity of producing software has only increased one to two percent a year in the last thirty years. Ironically, the computer and its software have contributed significantly to the industry-wide productivity, but computer professionals have done a poor job of using the computer to do their job. Engineering disciplines and methodologies are now emerging supported by software tools that address the problems of software development. This paper addresses some of the current software engineering methodologies as a backdrop for the general evaluation of computer assisted software engineering (CASE) tools from actual installation of and experimentation with some specific tools.

  2. Methodologic model to scheduling on service systems: a software engineering approach

    Directory of Open Access Journals (Sweden)

    Eduyn Ramiro Lopez-Santana

    2016-06-01

    Full Text Available This paper presents an approach of software engineering to a research proposal to make an Expert System to scheduling on service systems using methodologies and processes of software development. We use the adaptive software development as methodology for the software architecture based on the description as a software metaprocess that characterizes the research process. We make UML’s diagrams (Unified Modeling Language to provide a visual modeling that describes the research methodology in order to identify the actors, elements and interactions in the research process.

  3. Intelligent systems/software engineering methodology - A process to manage cost and risk

    Science.gov (United States)

    Friedlander, Carl; Lehrer, Nancy

    1991-01-01

    A systems development methodology is discussed that has been successfully applied to the construction of a number of intelligent systems. This methodology is a refinement of both evolutionary and spiral development methodologies. It is appropriate for development of intelligent systems. The application of advanced engineering methodology to the development of software products and intelligent systems is an important step toward supporting the transition of AI technology into aerospace applications. A description of the methodology and the process model from which it derives is given. Associated documents and tools are described which are used to manage the development process and record and report the emerging design.

  4. Application of Formal Methods in Software Engineering

    Directory of Open Access Journals (Sweden)

    Adriana Morales

    2011-12-01

    Full Text Available The purpose of this research work is to examine: (1 why are necessary the formal methods for software systems today, (2 high integrity systems through the methodology C-by-C –Correctness-by-Construction–, and (3 an affordable methodology to apply formal methods in software engineering. The research process included reviews of the literature through Internet, in publications and presentations in events. Among the Research results found that: (1 there is increasing the dependence that the nations have, the companies and people of software systems, (2 there is growing demand for software Engineering to increase social trust in the software systems, (3 exist methodologies, as C-by-C, that can provide that level of trust, (4 Formal Methods constitute a principle of computer science that can be applied software engineering to perform reliable process in software development, (5 software users have the responsibility to demand reliable software products, and (6 software engineers have the responsibility to develop reliable software products. Furthermore, it is concluded that: (1 it takes more research to identify and analyze other methodologies and tools that provide process to apply the Formal Software Engineering methods, (2 Formal Methods provide an unprecedented ability to increase the trust in the exactitude of the software products and (3 by development of new methodologies and tools is being achieved costs are not more a disadvantage for application of formal methods.

  5. Mining software specifications methodologies and applications

    CERN Document Server

    Lo, David

    2011-01-01

    An emerging topic in software engineering and data mining, specification mining tackles software maintenance and reliability issues that cost economies billions of dollars each year. The first unified reference on the subject, Mining Software Specifications: Methodologies and Applications describes recent approaches for mining specifications of software systems. Experts in the field illustrate how to apply state-of-the-art data mining and machine learning techniques to address software engineering concerns. In the first set of chapters, the book introduces a number of studies on mining finite

  6. Identifying Relevant Studies in Software Engineering

    DEFF Research Database (Denmark)

    Zhang, He; Ali Babar, Muhammad; Tell, Paolo

    2011-01-01

    Context: Systematic literature review (SLR) has become an important research methodology in software engineering since the introduction of evidence-based software engineering (EBSE) in 2004. One critical step in applying this methodology is to design and execute appropriate and effective search....... Objective: The main objective of the research reported in this paper is to improve the search step of undertaking SLRs in software engineering (SE) by devising and evaluating systematic and practical approaches to identifying relevant studies in SE. Method: We have systematically selected and analytically...

  7. The NLC Software Requirements Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Shoaee, Hamid

    2002-08-20

    We describe the software requirements and development methodology developed for the NLC control system. Given the longevity of that project, and the likely geographical distribution of the collaborating engineers, the planned requirements management process is somewhat more formal than the norm in high energy physics projects. The short term goals of the requirements process are to accurately estimate costs, to decompose the problem, and to determine likely technologies. The long term goal is to enable a smooth transition from high level functional requirements to specific subsystem and component requirements for individual programmers, and to support distributed development. The methodology covers both ends of that life cycle. It covers both the analytical and documentary tools for software engineering, and project management support. This paper introduces the methodology, which is fully described in [1].

  8. Beginning software engineering

    CERN Document Server

    Stephens, Rod

    2015-01-01

    Beginning Software Engineering demystifies the software engineering methodologies and techniques that professional developers use to design and build robust, efficient, and consistently reliable software. Free of jargon and assuming no previous programming, development, or management experience, this accessible guide explains important concepts and techniques that can be applied to any programming language. Each chapter ends with exercises that let you test your understanding and help you elaborate on the chapter's main concepts. Everything you need to understand waterfall, Sashimi, agile, RAD, Scrum, Kanban, Extreme Programming, and many other development models is inside!

  9. Software Engineering for Human Spaceflight

    Science.gov (United States)

    Fredrickson, Steven E.

    2014-01-01

    The Spacecraft Software Engineering Branch of NASA Johnson Space Center (JSC) provides world-class products, leadership, and technical expertise in software engineering, processes, technology, and systems management for human spaceflight. The branch contributes to major NASA programs (e.g. ISS, MPCV/Orion) with in-house software development and prime contractor oversight, and maintains the JSC Engineering Directorate CMMI rating for flight software development. Software engineering teams work with hardware developers, mission planners, and system operators to integrate flight vehicles, habitats, robotics, and other spacecraft elements. They seek to infuse automation and autonomy into missions, and apply new technologies to flight processor and computational architectures. This presentation will provide an overview of key software-related projects, software methodologies and tools, and technology pursuits of interest to the JSC Spacecraft Software Engineering Branch.

  10. Methodology for object-oriented real-time systems analysis and design: Software engineering

    Science.gov (United States)

    Schoeffler, James D.

    1991-01-01

    Successful application of software engineering methodologies requires an integrated analysis and design life-cycle in which the various phases flow smoothly 'seamlessly' from analysis through design to implementation. Furthermore, different analysis methodologies often lead to different structuring of the system so that the transition from analysis to design may be awkward depending on the design methodology to be used. This is especially important when object-oriented programming is to be used for implementation when the original specification and perhaps high-level design is non-object oriented. Two approaches to real-time systems analysis which can lead to an object-oriented design are contrasted: (1) modeling the system using structured analysis with real-time extensions which emphasizes data and control flows followed by the abstraction of objects where the operations or methods of the objects correspond to processes in the data flow diagrams and then design in terms of these objects; and (2) modeling the system from the beginning as a set of naturally occurring concurrent entities (objects) each having its own time-behavior defined by a set of states and state-transition rules and seamlessly transforming the analysis models into high-level design models. A new concept of a 'real-time systems-analysis object' is introduced and becomes the basic building block of a series of seamlessly-connected models which progress from the object-oriented real-time systems analysis and design system analysis logical models through the physical architectural models and the high-level design stages. The methodology is appropriate to the overall specification including hardware and software modules. In software modules, the systems analysis objects are transformed into software objects.

  11. Engineering high quality medical software

    CERN Document Server

    Coronato, Antonio

    2018-01-01

    This book focuses on high-confidence medical software in the growing field of e-health, telecare services and health technology. It covers the development of methodologies and engineering tasks together with standards and regulations for medical software.

  12. Software life cycle methodologies and environments

    Science.gov (United States)

    Fridge, Ernest

    1991-01-01

    Products of this project will significantly improve the quality and productivity of Space Station Freedom Program software processes by: improving software reliability and safety; and broadening the range of problems that can be solved with computational solutions. Projects brings in Computer Aided Software Engineering (CASE) technology for: Environments such as Engineering Script Language/Parts Composition System (ESL/PCS) application generator, Intelligent User Interface for cost avoidance in setting up operational computer runs, Framework programmable platform for defining process and software development work flow control, Process for bringing CASE technology into an organization's culture, and CLIPS/CLIPS Ada language for developing expert systems; and methodologies such as Method for developing fault tolerant, distributed systems and a method for developing systems for common sense reasoning and for solving expert systems problems when only approximate truths are known.

  13. Object oriented development of engineering software using CLIPS

    Science.gov (United States)

    Yoon, C. John

    1991-01-01

    Engineering applications involve numeric complexity and manipulations of a large amount of data. Traditionally, numeric computation has been the concern in developing an engineering software. As engineering application software became larger and more complex, management of resources such as data, rather than the numeric complexity, has become the major software design problem. Object oriented design and implementation methodologies can improve the reliability, flexibility, and maintainability of the resulting software; however, some tasks are better solved with the traditional procedural paradigm. The C Language Integrated Production System (CLIPS), with deffunction and defgeneric constructs, supports the procedural paradigm. The natural blending of object oriented and procedural paradigms has been cited as the reason for the popularity of the C++ language. The CLIPS Object Oriented Language's (COOL) object oriented features are more versatile than C++'s. A software design methodology based on object oriented and procedural approaches appropriate for engineering software, and to be implemented in CLIPS was outlined. A method for sensor placement for Space Station Freedom is being implemented in COOL as a sample problem.

  14. Effective Software Engineering Leadership for Development Programs

    Science.gov (United States)

    Cagle West, Marsha

    2010-01-01

    Software is a critical component of systems ranging from simple consumer appliances to complex health, nuclear, and flight control systems. The development of quality, reliable, and effective software solutions requires the incorporation of effective software engineering processes and leadership. Processes, approaches, and methodologies for…

  15. Milestones in software engineering and knowledge engineering history: a comparative review.

    Science.gov (United States)

    del Águila, Isabel M; Palma, José; Túnez, Samuel

    2014-01-01

    We present a review of the historical evolution of software engineering, intertwining it with the history of knowledge engineering because "those who cannot remember the past are condemned to repeat it." This retrospective represents a further step forward to understanding the current state of both types of engineerings; history has also positive experiences; some of them we would like to remember and to repeat. Two types of engineerings had parallel and divergent evolutions but following a similar pattern. We also define a set of milestones that represent a convergence or divergence of the software development methodologies. These milestones do not appear at the same time in software engineering and knowledge engineering, so lessons learned in one discipline can help in the evolution of the other one.

  16. The verification methodologies for a software modeling of Engineered Safety Features- Component Control System (ESF-CCS)

    International Nuclear Information System (INIS)

    Lee, Young-Jun; Cheon, Se-Woo; Cha, Kyung-Ho; Park, Gee-Yong; Kwon, Kee-Choon

    2007-01-01

    The safety of a software is not guaranteed through a simple testing of the software. The testing reviews only the static functions of a software. The behavior, dynamic state of a software is not reviewed by a software testing. The Ariane5 rocket accident and the failure of the Virtual Case File Project are determined by a software fault. Although this software was tested thoroughly, the potential errors existed internally. There are a lot of methods to solve these problems. One of the methods is a formal methodology. It describes the software requirements as a formal specification during a software life cycle and verifies a specified design. This paper suggests the methods which verify the design to be described as a formal specification. We adapt these methods to the software of a ESF-CCS (Engineered Safety Features-Component Control System) and use the SCADE (Safety Critical Application Development Environment) tool for adopting the suggested verification methods

  17. Emerging methods, technologies and process management in software engineering

    CERN Document Server

    Ferrucci, Filomena; Tortora, Genny; Tucci, Maurizio

    2007-01-01

    A high-level introduction to new technologies andmethods in the field of software engineering Recent years have witnessed rapid evolution of software engineering methodologies, and until now, there has been no single-source introduction to emerging technologies in the field.

  18. Is Chinese software engineering professionalizing or not?

    DEFF Research Database (Denmark)

    Yang, Yan

    2012-01-01

    This paper aims to discuss the challenge for the classical idea of professionalism in understanding the Chinese software engineering industry after giving a close insight into the development of this industry as well as individual engineers with a psycho-societal perspective. Design....../methodology/approach: The study starts with the general review of the sociological concept of profession, professional and specialization of knowledge. Together with revealing the critical challenge from the empirical field of software engineering industry regarding its professionalization, a critique of the neglect...... of subjective agency in classical conception of professionalism in sociology theory and methodology is set out. Findings: A case study with interpretation of the subject's continuously developing identification with their specialization in knowledge and occupation from their narration of career experience...

  19. Milestones in Software Engineering and Knowledge Engineering History: A Comparative Review

    Science.gov (United States)

    del Águila, Isabel M.; Palma, José; Túnez, Samuel

    2014-01-01

    We present a review of the historical evolution of software engineering, intertwining it with the history of knowledge engineering because “those who cannot remember the past are condemned to repeat it.” This retrospective represents a further step forward to understanding the current state of both types of engineerings; history has also positive experiences; some of them we would like to remember and to repeat. Two types of engineerings had parallel and divergent evolutions but following a similar pattern. We also define a set of milestones that represent a convergence or divergence of the software development methodologies. These milestones do not appear at the same time in software engineering and knowledge engineering, so lessons learned in one discipline can help in the evolution of the other one. PMID:24624046

  20. Agent-oriented software engineering reflections on architectures, methodologies, languages, and frameworks

    CERN Document Server

    Shehory, Onn

    2014-01-01

    With this book, Onn Shehory and Arnon Sturm, together with further contributors, introduce the reader to various facets of agent-oriented software engineering (AOSE). They provide a selected collection of state-of-the-art findings, which combines research from information systems, artificial intelligence, distributed systems and software engineering and covers essential development aspects of agent-based systems. The book chapters are organized into five parts. The first part introduces the AOSE domain in general, including introduction to agents and the peculiarities of software engineerin

  1. Proceedings of the Fifteenth Annual Software Engineering Workshop

    Science.gov (United States)

    1990-01-01

    The Software Engineering Laboratory (SEL) is an organization sponsored by GSFC and created for the purpose of investigating the effectiveness of software engineering technologies when applied to the development of applications software. The goals of the SEL are: (1) to understand the software development process in the GSFC environment; (2) to measure the effect of various methodologies, tools, and models on this process; and (3) to identify and then to apply successful development practices. Fifteen papers were presented at the Fifteenth Annual Software Engineering Workshop in five sessions: (1) SEL at age fifteen; (2) process improvement; (3) measurement; (4) reuse; and (5) process assessment. The sessions were followed by two panel discussions: (1) experiences in implementing an effective measurement program; and (2) software engineering in the 1980's. A summary of the presentations and panel discussions is given.

  2. Proceedings of the 19th Annual Software Engineering Workshop

    Science.gov (United States)

    1994-01-01

    The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of applications software. The goals of the SEL are: (1) to understand the software development process in the GSFC environment; (2) to measure the effects of various methodologies, tools, and models on this process; and (3) to identify and then to apply successful development practices. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that include this document.

  3. Proceedings of the Ninth Annual Software Engineering Workshop

    Science.gov (United States)

    1984-01-01

    Experiences in measurement, utilization, and evaluation of software methodologies, models, and tools are discussed. NASA's involvement in ever larger and more complex systems, like the space station project, provides a motive for the support of software engineering research and the exchange of ideas in such forums. The topics of current SEL research are software error studies, experiments with software development, and software tools.

  4. A framework for assessing the adequacy and effectiveness of software development methodologies

    Science.gov (United States)

    Arthur, James D.; Nance, Richard E.

    1990-01-01

    Tools, techniques, environments, and methodologies dominate the software engineering literature, but relatively little research in the evaluation of methodologies is evident. This work reports an initial attempt to develop a procedural approach to evaluating software development methodologies. Prominent in this approach are: (1) an explication of the role of a methodology in the software development process; (2) the development of a procedure based on linkages among objectives, principles, and attributes; and (3) the establishment of a basis for reduction of the subjective nature of the evaluation through the introduction of properties. An application of the evaluation procedure to two Navy methodologies has provided consistent results that demonstrate the utility and versatility of the evaluation procedure. Current research efforts focus on the continued refinement of the evaluation procedure through the identification and integration of product quality indicators reflective of attribute presence, and the validation of metrics supporting the measure of those indicators. The consequent refinement of the evaluation procedure offers promise of a flexible approach that admits to change as the field of knowledge matures. In conclusion, the procedural approach presented in this paper represents a promising path toward the end goal of objectively evaluating software engineering methodologies.

  5. Software Engineering Guidebook

    Science.gov (United States)

    Connell, John; Wenneson, Greg

    1993-01-01

    The Software Engineering Guidebook describes SEPG (Software Engineering Process Group) supported processes and techniques for engineering quality software in NASA environments. Three process models are supported: structured, object-oriented, and evolutionary rapid-prototyping. The guidebook covers software life-cycles, engineering, assurance, and configuration management. The guidebook is written for managers and engineers who manage, develop, enhance, and/or maintain software under the Computer Software Services Contract.

  6. Testing methodology of embedded software in digital plant protection system

    International Nuclear Information System (INIS)

    Seong, Ah Young; Choi, Bong Joo; Lee, Na Young; Hwang, Il Soon

    2001-01-01

    It is necessary to assure the reliability of software in order to digitalize RPS(Reactor Protection System). Since RPS causes fatal damage on accidental cases, it is classified as Safety 1E class. Therefore we propose the effective testing methodology to assure the reliability of embedded software in the DPPS(Digital Plant Protection System). To test the embedded software effectively in DPPS, our methodology consists of two steps. The first is the re-engineering step that extracts classes from structural source program, and the second is the level of testing step which is composed of unit testing, Integration Testing and System Testing. On each testing step we test the embedded software with selected test cases after the test item identification step. If we use this testing methodology, we can test the embedded software effectively by reducing the cost and the time

  7. Software engineering

    CERN Document Server

    Sommerville, Ian

    2010-01-01

    The ninth edition of Software Engineering presents a broad perspective of software engineering, focusing on the processes and techniques fundamental to the creation of reliable, software systems. Increased coverage of agile methods and software reuse, along with coverage of 'traditional' plan-driven software engineering, gives readers the most up-to-date view of the field currently available. Practical case studies, a full set of easy-to-access supplements, and extensive web resources make teaching the course easier than ever.

  8. Towards a General Software Engineering Methodology for the Internet of Things

    OpenAIRE

    Zambonelli, Franco

    2016-01-01

    As research in the Internet of Thing area progresses, and a multitude of proposals exist to solve a variety of problems, the need for a general principled software engineering approach for the systematic development of IoT systems and applications arises. In this paper, by synthesizing form the state of the art in the area, we attempt at framing the key concepts and abstractions that revolve around the design and development of IoT systems and applications, and draft a software engineering me...

  9. Software engineering architecture-driven software development

    CERN Document Server

    Schmidt, Richard F

    2013-01-01

    Software Engineering: Architecture-driven Software Development is the first comprehensive guide to the underlying skills embodied in the IEEE's Software Engineering Body of Knowledge (SWEBOK) standard. Standards expert Richard Schmidt explains the traditional software engineering practices recognized for developing projects for government or corporate systems. Software engineering education often lacks standardization, with many institutions focusing on implementation rather than design as it impacts product architecture. Many graduates join the workforce with incomplete skil

  10. Global Software Engineering: A Software Process Approach

    Science.gov (United States)

    Richardson, Ita; Casey, Valentine; Burton, John; McCaffery, Fergal

    Our research has shown that many companies are struggling with the successful implementation of global software engineering, due to temporal, cultural and geographical distance, which causes a range of factors to come into play. For example, cultural, project managementproject management and communication difficulties continually cause problems for software engineers and project managers. While the implementation of efficient software processes can be used to improve the quality of the software product, published software process models do not cater explicitly for the recent growth in global software engineering. Our thesis is that global software engineering factors should be included in software process models to ensure their continued usefulness in global organisations. Based on extensive global software engineering research, we have developed a software process, Global Teaming, which includes specific practices and sub-practices. The purpose is to ensure that requirements for successful global software engineering are stipulated so that organisations can ensure successful implementation of global software engineering.

  11. Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 14

    Science.gov (United States)

    1996-01-01

    The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

  12. Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 15

    Science.gov (United States)

    1997-01-01

    The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

  13. Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 13

    Science.gov (United States)

    1995-01-01

    The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

  14. Comparative study on software development methodologies

    Directory of Open Access Journals (Sweden)

    Mihai Liviu DESPA

    2014-12-01

    Full Text Available This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager handles challenges and risks that are predominantly encountered in business and research areas that involve state of the art technology. Conventional software development stages are defined and briefly described. Development stages are the building blocks of any software development methodology so it is important to properly research this aspect. Current software development methodologies are presented. Development stages are defined for every showcased methodology. For each methodology a graphic representation is illustrated in order to better individualize its structure. Software development methodologies are compared by highlighting strengths and weaknesses from the stakeholder's point of view. Conclusions are formulated and a research direction aimed at formalizing a software development methodology dedicated to innovation orientated IT projects is enunciated.

  15. Computational intelligence and quantitative software engineering

    CERN Document Server

    Succi, Giancarlo; Sillitti, Alberto

    2016-01-01

    In a down-to-the earth manner, the volume lucidly presents how the fundamental concepts, methodology, and algorithms of Computational Intelligence are efficiently exploited in Software Engineering and opens up a novel and promising avenue of a comprehensive analysis and advanced design of software artifacts. It shows how the paradigm and the best practices of Computational Intelligence can be creatively explored to carry out comprehensive software requirement analysis, support design, testing, and maintenance. Software Engineering is an intensive knowledge-based endeavor of inherent human-centric nature, which profoundly relies on acquiring semiformal knowledge and then processing it to produce a running system. The knowledge spans a wide variety of artifacts, from requirements, captured in the interaction with customers, to design practices, testing, and code management strategies, which rely on the knowledge of the running system. This volume consists of contributions written by widely acknowledged experts ...

  16. Software engineering laboratory series: Annotated bibliography of software engineering laboratory literature

    Science.gov (United States)

    Morusiewicz, Linda; Valett, Jon

    1992-01-01

    This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) the Software Engineering Laboratory; (2) the Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

  17. Formalizing the ISDF Software Development Methodology

    Directory of Open Access Journals (Sweden)

    Mihai Liviu DESPA

    2015-01-01

    Full Text Available The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of what makes a web application innovative. Innovation in software development is presented from the end-user, project owner and project manager’s point of view. The main components of a software development methodology are identified. Thus a software development methodology should account for people, roles, skills, teams, tools, techniques, processes, activities, standards, quality measuring tools, and team values. Current software development models are presented and briefly analysed. The need for a dedicated innovation oriented software development methodology is emphasized by highlighting shortcomings of current software development methodologies when tackling innovation. The ISDF methodology is presented in the context of developing an actual application. The ALHPA application is used as a case study for emphasizing the characteristics of the ISDF methodology. The development life cycle of the ISDF methodology includes research, planning, prototyping, design, development, testing, setup and maintenance. Artefacts generated by the ISDF methodology are presented. Quality is managed in the ISDF methodology by assessing compliance, usability, reliability, repeatability, availability and security. In order to properly asses each quality component a dedicated indicator is built. A template for interpreting each indicator is provided. Conclusions are formulated and new related research topics are submitted for debate.

  18. An engineering context for software engineering

    OpenAIRE

    Riehle, Richard D.

    2008-01-01

    New engineering disciplines are emerging in the late Twentieth and early Twenty-first Century. One such emerging discipline is software engineering. The engineering community at large has long harbored a sense of skepticism about the validity of the term software engineering. During most of the fifty-plus years of software practice, that skepticism was probably justified. Professional education of software developers often fell short of the standard expected for conventional engineers; so...

  19. A methodology for software documentation

    OpenAIRE

    Torres Júnior, Roberto Dias; Ahlert, Hubert

    2000-01-01

    With the growing complexity of window based software and the use of object-oriented, the development of software is getting more complex than ever. Based on that, this article intends to present a methodology for software documentation and to analyze our experience and how this methodology can aid the software maintenance

  20. Software engineering

    CERN Document Server

    Sommerville, Ian

    2016-01-01

    For courses in computer science and software engineering The Fundamental Practice of Software Engineering Software Engineering introduces readers to the overwhelmingly important subject of software programming and development. In the past few years, computer systems have come to dominate not just our technological growth, but the foundations of our world's major industries. This text seeks to lay out the fundamental concepts of this huge and continually growing subject area in a clear and comprehensive manner. The Tenth Edition contains new information that highlights various technological updates of recent years, providing readers with highly relevant and current information. Sommerville's experience in system dependability and systems engineering guides the text through a traditional plan-based approach that incorporates some novel agile methods. The text strives to teach the innovators of tomorrow how to create software that will make our world a better, safer, and more advanced place to live.

  1. Development methodology for the software life cycle process of the safety software

    Energy Technology Data Exchange (ETDEWEB)

    Kim, D. H.; Lee, S. S. [BNF Technology, Taejon (Korea, Republic of); Cha, K. H.; Lee, C. S.; Kwon, K. C.; Han, H. B. [KAERI, Taejon (Korea, Republic of)

    2002-05-01

    A methodology for developing software life cycle processes (SLCP) is proposed to develop the digital safety-critical Engineered Safety Features - Component Control System (ESF-CCS) successfully. A software life cycle model is selected as the hybrid model mixed with waterfall, prototyping, and spiral models and is composed of two stages , development stages of prototype of ESF-CCS and ESF-CCS. To produce the software life cycle (SLC) for the Development of the Digital Reactor Safety System, the Activities referenced in IEEE Std. 1074-1997 are mapped onto the hybrid model. The SLCP is established after the available OPAs (Organizational Process Asset) are applied to the SLC Activities, and the known constraints are reconciled. The established SLCP describes well the software life cycle activities with which the Regulatory Authority provides.

  2. Development methodology for the software life cycle process of the safety software

    International Nuclear Information System (INIS)

    Kim, D. H.; Lee, S. S.; Cha, K. H.; Lee, C. S.; Kwon, K. C.; Han, H. B.

    2002-01-01

    A methodology for developing software life cycle processes (SLCP) is proposed to develop the digital safety-critical Engineered Safety Features - Component Control System (ESF-CCS) successfully. A software life cycle model is selected as the hybrid model mixed with waterfall, prototyping, and spiral models and is composed of two stages , development stages of prototype of ESF-CCS and ESF-CCS. To produce the software life cycle (SLC) for the Development of the Digital Reactor Safety System, the Activities referenced in IEEE Std. 1074-1997 are mapped onto the hybrid model. The SLCP is established after the available OPAs (Organizational Process Asset) are applied to the SLC Activities, and the known constraints are reconciled. The established SLCP describes well the software life cycle activities with which the Regulatory Authority provides

  3. A software methodology for compiling quantum programs

    Science.gov (United States)

    Häner, Thomas; Steiger, Damian S.; Svore, Krysta; Troyer, Matthias

    2018-04-01

    Quantum computers promise to transform our notions of computation by offering a completely new paradigm. To achieve scalable quantum computation, optimizing compilers and a corresponding software design flow will be essential. We present a software architecture for compiling quantum programs from a high-level language program to hardware-specific instructions. We describe the necessary layers of abstraction and their differences and similarities to classical layers of a computer-aided design flow. For each layer of the stack, we discuss the underlying methods for compilation and optimization. Our software methodology facilitates more rapid innovation among quantum algorithm designers, quantum hardware engineers, and experimentalists. It enables scalable compilation of complex quantum algorithms and can be targeted to any specific quantum hardware implementation.

  4. A development methodology for scientific software

    International Nuclear Information System (INIS)

    Cort, G.; Barrus, D.M.; Goldstone, J.A.; Miller, L.; Nelson, R.O.; Poore, R.V.

    1985-01-01

    We present the details of a software development methodology that addresses all phases of the software life cycle, yet is well suited for application by small projects with limited resources. The methodology has been developed at the Los Alamos Weapons Neutron Research (WNR) Facility and was utilized during the recent development of the WNR Data Acquisition Command Language. The methodology emphasizes the development and maintenance of comprehensive documentation for all software components. The impact of the methodology upon software quality and programmer productivity is assessed

  5. Software Engineering Laboratory Series: Proceedings of the Twentieth Annual Software Engineering Workshop

    Science.gov (United States)

    1995-01-01

    The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

  6. Formalizing the ISDF Software Development Methodology

    OpenAIRE

    Mihai Liviu DESPA

    2015-01-01

    The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of wha...

  7. Global Software Engineering

    DEFF Research Database (Denmark)

    Ebert, Christof; Kuhrmann, Marco; Prikladnicki, Rafael

    2016-01-01

    Professional software products and IT systems and services today are developed mostly by globally distributed teams, projects, and companies. Successfully orchestrating Global Software Engineering (GSE) has become the major success factor both for organizations and practitioners. Yet, more than...... and experience reported at the IEEE International Conference on Software Engineering (ICGSE) series. The outcomes of our analysis show GSE as a field highly attached to industry and, thus, a considerable share of ICGSE papers address the transfer of Software Engineering concepts and solutions to the global stage...

  8. Software Engineering Laboratory Series: Proceedings of the Twenty-First Annual Software Engineering Workshop

    Science.gov (United States)

    1996-01-01

    The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

  9. Software Engineering Laboratory Series: Proceedings of the Twenty-Second Annual Software Engineering Workshop

    Science.gov (United States)

    1997-01-01

    The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

  10. Comparative study on software development methodologies

    OpenAIRE

    Mihai Liviu DESPA

    2014-01-01

    This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager han...

  11. Application of software engineering to development of reactor safety codes

    International Nuclear Information System (INIS)

    Wilburn, N.P.; Niccoli, L.G.

    1981-01-01

    Software Engineering, which is a systematic methodology by which a large scale software development project is partitioned into manageable pieces, has been applied to the development of LMFBR safety codes. The techniques have been applied extensively in the business and aerospace communities and have provided an answer to the drastically increasing cost of developing and maintaining software. The five phases of software engineering (Survey, Analysis, Design, Implementation, and Testing) were applied in turn to development of these codes, along with Walkthroughs (peer review) at each stage. The application of these techniques has resulted in SUPERIOR SOFTWARE which is well documented, thoroughly tested, easy to modify, easier to use and maintain. The development projects have resulted in lower overall cost. (orig.) [de

  12. Software Engineering Education Directory

    Science.gov (United States)

    1990-04-01

    and Engineering (CMSC 735) Codes: GPEV2 * Textiooks: IEEE Tutoria on Models and Metrics for Software Management and Engameeing by Basi, Victor R...Software Engineering (Comp 227) Codes: GPRY5 Textbooks: IEEE Tutoria on Software Design Techniques by Freeman, Peter and Wasserman, Anthony 1. Software

  13. Software engineering processes principles and applications

    CERN Document Server

    Wang, Yingxu

    2000-01-01

    Fundamentals of the Software Engineering ProcessIntroductionA Unified Framework of the Software Engineering ProcessProcess AlgebraProcess-Based Software EngineeringSoftware Engineering Process System ModelingThe CMM ModelThe ISO 9001 ModelThe BOOTSTRAP ModelThe ISO/IEC 15504 (SPICE) ModelThe Software Engineering Process Reference Model: SEPRMSoftware Engineering Process System AnalysisBenchmarking the SEPRM ProcessesComparative Analysis of Current Process ModelsTransformation of Capability Levels Between Current Process ModelsSoftware Engineering Process EstablishmentSoftware Process Establish

  14. Application of agile methodologies in software development

    Directory of Open Access Journals (Sweden)

    Jovanović Aca D.

    2016-01-01

    Full Text Available The paper presents the potentials for the development of software using agile methodologies. Special consideration is devoted to the potentials and advantages of use of the Scrum methodology in the development of software and the relationship between the implementation of agile methodologies and the software development projects.

  15. Computer games and software engineering

    CERN Document Server

    Cooper, Kendra M L

    2015-01-01

    Computer games represent a significant software application domain for innovative research in software engineering techniques and technologies. Game developers, whether focusing on entertainment-market opportunities or game-based applications in non-entertainment domains, thus share a common interest with software engineers and developers on how to best engineer game software.Featuring contributions from leading experts in software engineering, the book provides a comprehensive introduction to computer game software development that includes its history as well as emerging research on the inte

  16. NASA software documentation standard software engineering program

    Science.gov (United States)

    1991-01-01

    The NASA Software Documentation Standard (hereinafter referred to as Standard) can be applied to the documentation of all NASA software. This Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. This basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

  17. Software Engineering Improvement Activities/Plan

    Science.gov (United States)

    2003-01-01

    bd Systems personnel accomplished the technical responsibilities for this reporting period, as planned. A close working relationship was maintained with personnel of the MSFC Avionics Department Software Group (ED14). Work accomplishments included development, evaluation, and enhancement of a software cost model, performing literature search and evaluation of software tools available for code analysis and requirements analysis, and participating in other relevant software engineering activities. Monthly reports were submitted. This support was provided to the Flight Software Group/ED 1 4 in accomplishing the software engineering improvement engineering activities of the Marshall Space Flight Center (MSFC) Software Engineering Improvement Plan.

  18. Software Engineering Improvement Plan

    Science.gov (United States)

    2006-01-01

    In performance of this task order, bd Systems personnel provided support to the Flight Software Branch and the Software Working Group through multiple tasks related to software engineering improvement and to activities of the independent Technical Authority (iTA) Discipline Technical Warrant Holder (DTWH) for software engineering. To ensure that the products, comments, and recommendations complied with customer requirements and the statement of work, bd Systems personnel maintained close coordination with the customer. These personnel performed work in areas such as update of agency requirements and directives database, software effort estimation, software problem reports, a web-based process asset library, miscellaneous documentation review, software system requirements, issue tracking software survey, systems engineering NPR, and project-related reviews. This report contains a summary of the work performed and the accomplishments in each of these areas.

  19. Software engineer's pocket book

    CERN Document Server

    Tooley, Michael

    2013-01-01

    Software Engineer's Pocket Book provides a concise discussion on various aspects of software engineering. The book is comprised of six chapters that tackle various areas of concerns in software engineering. Chapter 1 discusses software development, and Chapter 2 covers programming languages. Chapter 3 deals with operating systems. The book also tackles discrete mathematics and numerical computation. Data structures and algorithms are also explained. The text will be of great use to individuals involved in the specification, design, development, implementation, testing, maintenance, and qualit

  20. RAGE Reusable Game Software Components and Their Integration into Serious Game Engines

    NARCIS (Netherlands)

    Van der Vegt, Wim; Nyamsuren, Enkhbold; Westera, Wim

    2016-01-01

    This paper presents and validates a methodology for integrating reusable software components in diverse game engines. While conforming to the RAGE com-ponent-based architecture described elsewhere, the paper explains how the interac-tions and data exchange processes between a reusable software

  1. Software and Network Engineering

    CERN Document Server

    2012-01-01

    The series "Studies in Computational Intelligence" (SCI) publishes new developments and advances in the various areas of computational intelligence – quickly and with a high quality. The intent is to cover the theory, applications, and design methods of computational intelligence, as embedded in the fields of engineering, computer science, physics and life science, as well as the methodologies behind them. The series contains monographs, lecture notes and edited volumes in computational intelligence spanning the areas of neural networks, connectionist systems, genetic algorithms, evolutionary computation, artificial intelligence, cellular automata, self-organizing systems, soft computing, fuzzy systems, and hybrid intelligent systems. Critical to both contributors and readers are the short publication time and world-wide distribution - this permits a rapid and broad dissemination of research results.   The purpose of the first ACIS International Symposium on Software and Network Engineering held on Decembe...

  2. Integrating interface slicing into software engineering processes

    Science.gov (United States)

    Beck, Jon

    1993-01-01

    Interface slicing is a tool which was developed to facilitate software engineering. As previously presented, it was described in terms of its techniques and mechanisms. The integration of interface slicing into specific software engineering activities is considered by discussing a number of potential applications of interface slicing. The applications discussed specifically address the problems, issues, or concerns raised in a previous project. Because a complete interface slicer is still under development, these applications must be phrased in future tenses. Nonetheless, the interface slicing techniques which were presented can be implemented using current compiler and static analysis technology. Whether implemented as a standalone tool or as a module in an integrated development or reverse engineering environment, they require analysis no more complex than that required for current system development environments. By contrast, conventional slicing is a methodology which, while showing much promise and intuitive appeal, has yet to be fully implemented in a production language environment despite 12 years of development.

  3. Methodology for Designing Fault-Protection Software

    Science.gov (United States)

    Barltrop, Kevin; Levison, Jeffrey; Kan, Edwin

    2006-01-01

    A document describes a methodology for designing fault-protection (FP) software for autonomous spacecraft. The methodology embodies and extends established engineering practices in the technical discipline of Fault Detection, Diagnosis, Mitigation, and Recovery; and has been successfully implemented in the Deep Impact Spacecraft, a NASA Discovery mission. Based on established concepts of Fault Monitors and Responses, this FP methodology extends the notion of Opinion, Symptom, Alarm (aka Fault), and Response with numerous new notions, sub-notions, software constructs, and logic and timing gates. For example, Monitor generates a RawOpinion, which graduates into Opinion, categorized into no-opinion, acceptable, or unacceptable opinion. RaiseSymptom, ForceSymptom, and ClearSymptom govern the establishment and then mapping to an Alarm (aka Fault). Local Response is distinguished from FP System Response. A 1-to-n and n-to- 1 mapping is established among Monitors, Symptoms, and Responses. Responses are categorized by device versus by function. Responses operate in tiers, where the early tiers attempt to resolve the Fault in a localized step-by-step fashion, relegating more system-level response to later tier(s). Recovery actions are gated by epoch recovery timing, enabling strategy, urgency, MaxRetry gate, hardware availability, hazardous versus ordinary fault, and many other priority gates. This methodology is systematic, logical, and uses multiple linked tables, parameter files, and recovery command sequences. The credibility of the FP design is proven via a fault-tree analysis "top-down" approach, and a functional fault-mode-effects-and-analysis via "bottoms-up" approach. Via this process, the mitigation and recovery strategy(s) per Fault Containment Region scope (width versus depth) the FP architecture.

  4. The Model of Formation of Professional Competence of Future Software Engineers

    Directory of Open Access Journals (Sweden)

    Viktor Sedov

    2016-05-01

    Full Text Available The rapid technological development of modern society fundamentally changes processes of production, communication and services. There is a great demand for specialists who are competent in recently emerged industries. Moreover, the gap between scientific invention and its wide distribution and consumption has significantly reduced. Therefore, we face an urgent need for preparation of specialists in higher education that meet the requirements of modern society and labour market. Particularly relevant is the issue of training of future software engineers in the system of master’s degree, which is the level of education that trains not only professionals, but also scientists and university teachers. The article presents a developed model of formation of professional competence of future software engineers in the system of master’s degree. The model comprises units of training of future software engineers, identifies methodological approaches, a number of general didactic and methodological principles that underpin learning processes in higher education. It describes methods, forms of organization and means that are used in the system of master’s degree, and also provides pedagogical conditions of effective implementation of the model. The developed model addresses the issue of individualization, intensification and optimization of studying. While developing the model, special attention was paid to updating the content of education and searching for new organizational forms of training of future software engineers.

  5. Recommendation systems in software engineering

    CERN Document Server

    Robillard, Martin P; Walker, Robert J; Zimmermann, Thomas

    2014-01-01

    With the growth of public and private data stores and the emergence of off-the-shelf data-mining technology, recommendation systems have emerged that specifically address the unique challenges of navigating and interpreting software engineering data.This book collects, structures and formalizes knowledge on recommendation systems in software engineering. It adopts a pragmatic approach with an explicit focus on system design, implementation, and evaluation. The book is divided into three parts: "Part I - Techniques" introduces basics for building recommenders in software engineering, including techniques for collecting and processing software engineering data, but also for presenting recommendations to users as part of their workflow.?"Part II - Evaluation" summarizes methods and experimental designs for evaluating recommendations in software engineering.?"Part III - Applications" describes needs, issues and solution concepts involved in entire recommendation systems for specific software engineering tasks, fo...

  6. Software Engineering Laboratory (SEL) cleanroom process model

    Science.gov (United States)

    Green, Scott; Basili, Victor; Godfrey, Sally; Mcgarry, Frank; Pajerski, Rose; Waligora, Sharon

    1991-01-01

    The Software Engineering Laboratory (SEL) cleanroom process model is described. The term 'cleanroom' originates in the integrated circuit (IC) production process, where IC's are assembled in dust free 'clean rooms' to prevent the destructive effects of dust. When applying the clean room methodology to the development of software systems, the primary focus is on software defect prevention rather than defect removal. The model is based on data and analysis from previous cleanroom efforts within the SEL and is tailored to serve as a guideline in applying the methodology to future production software efforts. The phases that are part of the process model life cycle from the delivery of requirements to the start of acceptance testing are described. For each defined phase, a set of specific activities is discussed, and the appropriate data flow is described. Pertinent managerial issues, key similarities and differences between the SEL's cleanroom process model and the standard development approach used on SEL projects, and significant lessons learned from prior cleanroom projects are presented. It is intended that the process model described here will be further tailored as additional SEL cleanroom projects are analyzed.

  7. Reflections on Software Engineering Education

    NARCIS (Netherlands)

    van Vliet, H.

    2006-01-01

    In recent years, the software engineering community has focused on organizing its existing knowledge and finding opportunities to transform that knowledge into a university curriculum. SWEBOK (the Guide to the Software Engineering Body of Knowledge) and Software Engineering 2004 are two initiatives

  8. Using Modern Methodologies with Maintenance Software

    Science.gov (United States)

    Streiffert, Barbara A.; Francis, Laurie K.; Smith, Benjamin D.

    2014-01-01

    Jet Propulsion Laboratory uses multi-mission software produced by the Mission Planning and Sequencing (MPS) team to process, simulate, translate, and package the commands that are sent to a spacecraft. MPS works under the auspices of the Multi-Mission Ground Systems and Services (MGSS). This software consists of nineteen applications that are in maintenance. The MPS software is classified as either class B (mission critical) or class C (mission important). The scheduling of tasks is difficult because mission needs must be addressed prior to performing any other tasks and those needs often spring up unexpectedly. Keeping track of the tasks that everyone is working on is also difficult because each person is working on a different software component. Recently the group adopted the Scrum methodology for planning and scheduling tasks. Scrum is one of the newer methodologies typically used in agile development. In the Scrum development environment, teams pick their tasks that are to be completed within a sprint based on priority. The team specifies the sprint length usually a month or less. Scrum is typically used for new development of one application. In the Scrum methodology there is a scrum master who is a facilitator who tries to make sure that everything moves smoothly, a product owner who represents the user(s) of the software and the team. MPS is not the traditional environment for the Scrum methodology. MPS has many software applications in maintenance, team members who are working on disparate applications, many users, and is interruptible based on mission needs, issues and requirements. In order to use scrum, the methodology needed adaptation to MPS. Scrum was chosen because it is adaptable. This paper is about the development of the process for using scrum, a new development methodology, with a team that works on disparate interruptible tasks on multiple software applications.

  9. E-COCOMO: The Extended COst Constructive MOdel for Cleanroom Software Engineering

    Directory of Open Access Journals (Sweden)

    Hitesh KUMAR SHARMA

    2014-02-01

    Full Text Available Mistakes create rework. Rework takes time and increases costs. The traditional software engineering methodology defines the ratio of Design:Code:Test as 40:20:40. As we can easily see that 40% time and efforts are used in testing phase in traditional approach, that means we have to perform rework again if we found some bugs in testing phase. This rework is being performed after Design and code phase. This rework will increase the cost exponentially. The cleanroom software engineering methodology controls the exponential growth in cost by removing this rework. It says that "do the work correct in first attempt and move to next phase after getting the proof of correctness". This new approach minimized the rework and reduces the cost in the exponential ratio. Due to the removal of testing phase, the COCOMO (COst COnstructive MOdel used for the traditional engineering is not directly applicable in cleanroom software engineering. The traditional cost drivers used for traditional COCOMO needs to be revised. We have proposed the Extended version of COCOMO (i.e. E-COCOMO in which we have incorporated some new cost drivers. This paper explains the proposed E-COCOMO and the detailed description of proposed new cost driver.

  10. Software engineering the current practice

    CERN Document Server

    Rajlich, Vaclav

    2011-01-01

    INTRODUCTION History of Software EngineeringSoftware PropertiesOrigins of SoftwareBirth of Software EngineeringThird Paradigm: Iterative ApproachSoftware Life Span ModelsStaged ModelVariants of Staged ModelSoftware Technologies Programming Languages and CompilersObject-Oriented TechnologyVersion Control SystemSoftware ModelsClass DiagramsUML Activity DiagramsClass Dependency Graphs and ContractsSOFTWARE CHANGEIntroduction to Software ChangeCharacteristics of Software ChangePhases of Software ChangeRequirements and Their ElicitationRequirements Analysis and Change InitiationConcepts and Concept

  11. TWRS engineering bibliography software listing

    International Nuclear Information System (INIS)

    Husa, E.I.

    1995-01-01

    This document contains the computer software listing for Engineering Bibliography software, developed by E. Ivar Husa. This software is in the working prototype stage of development. The code has not been tested to requirements. TWRS Engineering created this software for engineers to share bibliographic references across the Hanford site network (HLAN). This software is intended to store several hundred to several thousand references (a compendium with limited range). Coded changes are needed to support the larger number of references

  12. Global Software Engineering

    DEFF Research Database (Denmark)

    Ebert, Christof; Kuhrmann, Marco; Prikladnicki, Rafael

    2016-01-01

    SOFTWARE, LIKE ALL industry products, is the result of complex multinational supply chains with many partners from concept to development to production and maintenance. Global software engineering (GSE), IT outsourcing, and business process outsourcing during the past decade have showed growth...... rates of 10 to 20 percent per year. This instalment of Practitioner’s Digest summarizes experiences and guidance from industry to facilitate knowledge and technology transfer for GSE. It’s based on industry feedback from the annual IEEE International Conference on Global Software Engineering, which had...

  13. Software engineering

    CERN Document Server

    Thorin, Marc

    1985-01-01

    Software Engineering describes the conceptual bases as well as the main methods and rules on computer programming. This book presents software engineering as a coherent and logically built synthesis and makes it possible to properly carry out an application of small or medium difficulty that can later be developed and adapted to more complex cases. This text is comprised of six chapters and begins by introducing the reader to the fundamental notions of entities, actions, and programming. The next two chapters elaborate on the concepts of information and consistency domains and show that a proc

  14. Software engineering a practitioner's approach

    CERN Document Server

    Pressman, Roger S

    1997-01-01

    This indispensable guide to software engineering exploration enables practitioners to navigate the ins and outs of this rapidly changing field. Pressman's fully revised and updated Fourth Edition provides in-depth coverage of every important management and technical topic in software engineering. Moreover, readers will find the inclusion of the hottest developments in the field such as: formal methods and cleanroom software engineering, business process reengineering, and software reengineering.

  15. Computer-Aided Software Engineering - An approach to real-time software development

    Science.gov (United States)

    Walker, Carrie K.; Turkovich, John J.

    1989-01-01

    A new software engineering discipline is Computer-Aided Software Engineering (CASE), a technology aimed at automating the software development process. This paper explores the development of CASE technology, particularly in the area of real-time/scientific/engineering software, and a history of CASE is given. The proposed software development environment for the Advanced Launch System (ALS CASE) is described as an example of an advanced software development system for real-time/scientific/engineering (RT/SE) software. The Automated Programming Subsystem of ALS CASE automatically generates executable code and corresponding documentation from a suitably formatted specification of the software requirements. Software requirements are interactively specified in the form of engineering block diagrams. Several demonstrations of the Automated Programming Subsystem are discussed.

  16. Software engineers and nuclear engineers: teaming up to do testing

    International Nuclear Information System (INIS)

    Kelly, D.; Cote, N.; Shepard, T.

    2007-01-01

    The software engineering community has traditionally paid little attention to the specific needs of engineers and scientists who develop their own software. Recently there has been increased recognition that specific software engineering techniques need to be found for this group of developers. In this case study, a software engineering group teamed with a nuclear engineering group to develop a software testing strategy. This work examines the types of testing that proved to be useful and examines what each discipline brings to the table to improve the quality of the software product. (author)

  17. Software quality engineering a practitioner's approach

    CERN Document Server

    Suryn, Witold

    2014-01-01

    Software quality stems from two distinctive, but associated, topics in software engineering: software functional quality and software structural quality. Software Quality Engineering studies the tenets of both of these notions, which focus on the efficiency and value of a design, respectively. The text addresses engineering quality on both the application and system levels with attention to Information Systems and Embedded Systems as well as recent developments. Targeted at graduate engineering students and software quality specialists, the book analyzes the relationship between functionality

  18. Computer systems and software engineering

    Science.gov (United States)

    Mckay, Charles W.

    1988-01-01

    The High Technologies Laboratory (HTL) was established in the fall of 1982 at the University of Houston Clear Lake. Research conducted at the High Tech Lab is focused upon computer systems and software engineering. There is a strong emphasis on the interrelationship of these areas of technology and the United States' space program. In Jan. of 1987, NASA Headquarters announced the formation of its first research center dedicated to software engineering. Operated by the High Tech Lab, the Software Engineering Research Center (SERC) was formed at the University of Houston Clear Lake. The High Tech Lab/Software Engineering Research Center promotes cooperative research among government, industry, and academia to advance the edge-of-knowledge and the state-of-the-practice in key topics of computer systems and software engineering which are critical to NASA. The center also recommends appropriate actions, guidelines, standards, and policies to NASA in matters pertinent to the center's research. Results of the research conducted at the High Tech Lab/Software Engineering Research Center have given direction to many decisions made by NASA concerning the Space Station Program.

  19. An Architecture, System Engineering, and Acquisition Approach for Space System Software Resiliency

    Science.gov (United States)

    Phillips, Dewanne Marie

    architecture framework and acquisition methodology to improve the resiliency of space systems from a software perspective with an emphasis on the early phases of the systems engineering life cycle. This methodology involves seven steps: 1) Define technical resiliency requirements, 1a) Identify standards/policy for software resiliency, 2) Develop a request for proposal (RFP)/statement of work (SOW) for resilient space systems software, 3) Define software resiliency goals for space systems, 4) Establish software resiliency quality attributes, 5) Perform architectural tradeoffs and identify risks, 6) Conduct architecture assessments as part of the procurement process, and 7) Ascertain space system software architecture resiliency metrics. Data illustrates that software vulnerabilities can lead to opportunities for malicious cyber activities, which could degrade the space mission capability for the user community. Reducing the number of vulnerabilities by improving architecture and software system engineering practices can contribute to making space systems more resilient. Since cyber-attacks are enabled by shortfalls in software, robust software engineering practices and an architectural design are foundational to resiliency, which is a quality that allows the system to "take a hit to a critical component and recover in a known, bounded, and generally acceptable period of time". To achieve software resiliency for space systems, acquirers and suppliers must identify relevant factors and systems engineering practices to apply across the lifecycle, in software requirements analysis, architecture development, design, implementation, verification and validation, and maintenance phases.

  20. Teaching Empirical Software Engineering Using Expert Teams

    DEFF Research Database (Denmark)

    Kuhrmann, Marco

    2017-01-01

    Empirical software engineering aims at making software engineering claims measurable, i.e., to analyze and understand phenomena in software engineering and to evaluate software engineering approaches and solutions. Due to the involvement of humans and the multitude of fields for which software...... is crucial, software engineering is considered hard to teach. Yet, empirical software engineering increases this difficulty by adding the scientific method as extra dimension. In this paper, we present a Master-level course on empirical software engineering in which different empirical instruments...... an extra specific expertise that they offer as service to other teams, thus, fostering cross-team collaboration. The paper outlines the general course setup, topics addressed, and it provides initial lessons learned....

  1. Software development methodology for computer based I&C systems of prototype fast breeder reactor

    International Nuclear Information System (INIS)

    Manimaran, M.; Shanmugam, A.; Parimalam, P.; Murali, N.; Satya Murty, S.A.V.

    2015-01-01

    Highlights: • Software development methodology adopted for computer based I&C systems of PFBR is detailed. • Constraints imposed as part of software requirements and coding phase are elaborated. • Compliance to safety and security requirements are described. • Usage of CASE (Computer Aided Software Engineering) tools during software design, analysis and testing phase are explained. - Abstract: Prototype Fast Breeder Reactor (PFBR) is sodium cooled reactor which is in the advanced stage of construction in Kalpakkam, India. Versa Module Europa bus based Real Time Computer (RTC) systems are deployed for Instrumentation & Control of PFBR. RTC systems have to perform safety functions within the stipulated time which calls for highly dependable software. Hence, well defined software development methodology is adopted for RTC systems starting from the requirement capture phase till the final validation of the software product. V-model is used for software development. IEC 60880 standard and AERB SG D-25 guideline are followed at each phase of software development. Requirements documents and design documents are prepared as per IEEE standards. Defensive programming strategies are followed for software development using C language. Verification and validation (V&V) of documents and software are carried out at each phase by independent V&V committee. Computer aided software engineering tools are used for software modelling, checking for MISRA C compliance and to carry out static and dynamic analysis. Various software metrics such as cyclomatic complexity, nesting depth and comment to code are checked. Test cases are generated using equivalence class partitioning, boundary value analysis and cause and effect graphing techniques. System integration testing is carried out wherein functional and performance requirements of the system are monitored

  2. Software development methodology for computer based I&C systems of prototype fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Manimaran, M., E-mail: maran@igcar.gov.in; Shanmugam, A.; Parimalam, P.; Murali, N.; Satya Murty, S.A.V.

    2015-10-15

    Highlights: • Software development methodology adopted for computer based I&C systems of PFBR is detailed. • Constraints imposed as part of software requirements and coding phase are elaborated. • Compliance to safety and security requirements are described. • Usage of CASE (Computer Aided Software Engineering) tools during software design, analysis and testing phase are explained. - Abstract: Prototype Fast Breeder Reactor (PFBR) is sodium cooled reactor which is in the advanced stage of construction in Kalpakkam, India. Versa Module Europa bus based Real Time Computer (RTC) systems are deployed for Instrumentation & Control of PFBR. RTC systems have to perform safety functions within the stipulated time which calls for highly dependable software. Hence, well defined software development methodology is adopted for RTC systems starting from the requirement capture phase till the final validation of the software product. V-model is used for software development. IEC 60880 standard and AERB SG D-25 guideline are followed at each phase of software development. Requirements documents and design documents are prepared as per IEEE standards. Defensive programming strategies are followed for software development using C language. Verification and validation (V&V) of documents and software are carried out at each phase by independent V&V committee. Computer aided software engineering tools are used for software modelling, checking for MISRA C compliance and to carry out static and dynamic analysis. Various software metrics such as cyclomatic complexity, nesting depth and comment to code are checked. Test cases are generated using equivalence class partitioning, boundary value analysis and cause and effect graphing techniques. System integration testing is carried out wherein functional and performance requirements of the system are monitored.

  3. Sustainability in Software Engineering

    NARCIS (Netherlands)

    Wolfram, N.J.E.; Lago, P.; Osborne, Francesco

    2017-01-01

    The intersection between software engineering research and issues related to sustainability and green IT has been the subject of increasing attention. In spite of that, we observe that sustainability is still not clearly defined, or understood, in the field of software engineering. This lack of

  4. Software engineering from a Langley perspective

    Science.gov (United States)

    Voigt, Susan

    1994-01-01

    A brief introduction to software engineering is presented. The talk is divided into four sections beginning with the question 'What is software engineering', followed by a brief history of the progression of software engineering at the Langley Research Center in the context of an expanding computing environment. Several basic concepts and terms are introduced, including software development life cycles and maturity levels. Finally, comments are offered on what software engineering means for the Langley Research Center and where to find more information on the subject.

  5. Software Engineering Reviews and Audits

    CERN Document Server

    Summers, Boyd L

    2011-01-01

    Accurate software engineering reviews and audits have become essential to the success of software companies and military and aerospace programs. These reviews and audits define the framework and specific requirements for verifying software development efforts. Authored by an industry professional with three decades of experience, Software Engineering Reviews and Audits offers authoritative guidance for conducting and performing software first article inspections, and functional and physical configuration software audits. It prepares readers to answer common questions for conducting and perform

  6. International Conference on Software Engineering, Knowledge Engineering and Information Engineering (SEKEIE 2012)

    CERN Document Server

    Software Engineering and Knowledge Engineering: Theory and Practice

    2012-01-01

    2012 International Conference on Software Engineering, Knowledge Engineering and Information Engineering (SEKEIE 2012) will be held in Macau, April 1-2, 2012 . This conference will bring researchers and experts from the three areas of Software Engineering, Knowledge Engineering and Information Engineering together to share their latest research results and ideas.   This volume book covered significant recent developments in the Software Engineering, Knowledge Engineering and Information Engineering field, both theoretical and applied. We are glad this conference attracts your attentions, and thank your support to our conference. We will absorb remarkable suggestion, and make our conference more successful and perfect.

  7. A Methodology for Integrating Maintainability Using Software Metrics

    OpenAIRE

    Lewis, John A.; Henry, Sallie M.

    1989-01-01

    Maintainability must be integrated into software early in the development process. But for practical use, the techniques used must be as unobtrusive to the existing software development process as possible. This paper defines a methodology for integrating maintainability into large-scale software and describes an experiment which implemented the methodology into a major commercial software development environment.

  8. Customer Interaction in Software Development: A Comparison of Software Methodologies Deployed in Namibian Software Firms

    CSIR Research Space (South Africa)

    Iyawa, GE

    2016-01-01

    Full Text Available within the Namibian context. An implication for software project managers and software developers is that customer interaction should be properly managed to ensure that the software methodologies for improving software development processes...

  9. Model-driven software engineering

    NARCIS (Netherlands)

    Amstel, van M.F.; Brand, van den M.G.J.; Protic, Z.; Verhoeff, T.; Hamberg, R.; Verriet, J.

    2014-01-01

    Software plays an important role in designing and operating warehouses. However, traditional software engineering methods for designing warehouse software are not able to cope with the complexity, size, and increase of automation in modern warehouses. This chapter describes Model-Driven Software

  10. Annotated bibliography of Software Engineering Laboratory literature

    Science.gov (United States)

    Morusiewicz, Linda; Valett, Jon D.

    1991-01-01

    An annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory is given. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. All materials have been grouped into eight general subject areas for easy reference: The Software Engineering Laboratory; The Software Engineering Laboratory: Software Development Documents; Software Tools; Software Models; Software Measurement; Technology Evaluations; Ada Technology; and Data Collection. Subject and author indexes further classify these documents by specific topic and individual author.

  11. Handbook of Software Engineering and Knowledge Engineering

    CERN Document Server

    2001-01-01

    This is the first handbook to cover comprehensively both software engineering and knowledge engineering - two important fields that have become interwoven in recent years. Over 60 international experts have contributed to the book. Each chapter has been written in such a way that a practitioner of software engineering and knowledge engineering can easily understand and obtain useful information. Each chapter covers one topic and can be read independently of other chapters, providing both a general survey of the topic and an in-depth exposition of the state of the art.

  12. Software engineering in industry

    Science.gov (United States)

    Story, C. M.

    1989-12-01

    Can software be "engineered"? Can a few people with limited resources and a negligible budget produce high quality software solutions to complex software problems? It is possible to resolve the conflict between research activities and the necessity to view software development as a means to an end rather than as an end in itself? The aim of this paper is to encourage further thought and discussion on various topics which, in the author's experience, are becoming increasingly critical in large current software production and development projects, inside and outside high energy physics (HEP). This is done by briefly exploring some of the software engineering ideas and technologies now used in the information industry, using, as a case-study, a project with many similarities to those currently under way in HEP.

  13. Embedded and real time system development a software engineering perspective concepts, methods and principles

    CERN Document Server

    Saeed, Saqib; Darwish, Ashraf; Abraham, Ajith

    2014-01-01

    Nowadays embedded and real-time systems contain complex software. The complexity of embedded systems is increasing, and the amount and variety of software in the embedded products are growing. This creates a big challenge for embedded and real-time software development processes and there is a need to develop separate metrics and benchmarks. “Embedded and Real Time System Development: A Software Engineering Perspective: Concepts, Methods and Principles” presents practical as well as conceptual knowledge of the latest tools, techniques and methodologies of embedded software engineering and real-time systems. Each chapter includes an in-depth investigation regarding the actual or potential role of software engineering tools in the context of the embedded system and real-time system. The book presents state-of-the art and future perspectives with industry experts, researchers, and academicians sharing ideas and experiences including surrounding frontier technologies, breakthroughs, innovative solutions and...

  14. Software engineering turning theory into practice

    CERN Document Server

    Jones, Robert

    1996-01-01

    The term 'Software Engineering' was coined in the mid 1960s, it is said, as a challenge to the software community to start rationalising the software production process. Software engineering is a very young discipline and this challenge still eludes LHC demands software production on a scale far beyond that previously addressed in HEP and we are relying on software engineering to allow a significant number of people address this problem collectively. This series of lectures presents the basics of software engineering from the developer's point of view. The aim is to show how individual developers can improve the quality of the software they produce while avoiding the conflict between the creative process of designing software and the organisational needs of large projects.The Laser Interferometer Gravitanional Wave Observatory (LIGO) is being constructed with a goal to detect these waves and then to use them as a new tool to explore and study The sources of gravitanional waves and techniques for detection wil...

  15. A study on methodological of software development for HEP

    International Nuclear Information System (INIS)

    Ding Yuzheng; Dai Guiliang

    1999-01-01

    The HEP related software system is a large one. It comprises mainly detector simulation software, DAQ software and offline system. The author discusses the advantages of OO object oriented methodologies applying to such software system, and the basic strategy for the usage of OO methodologies, languages and tools in the development of the HEP related software are given

  16. Annotated bibliography of software engineering laboratory literature

    Science.gov (United States)

    Kistler, David; Bristow, John; Smith, Don

    1994-01-01

    This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. Nearly 200 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) The Software Engineering Laboratory; (2) The Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

  17. Software Innovation - Values for a Methodology

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2013-01-01

    Innovation is a recurrent theme in public as well as academic debate, and software development plays a major role for innovation in about every sector of our economy. As a consequence, software innovation will play an increasingly important role in software development. The focus in this paper is...... for experimentation, learning, and flexibility in software projects, but how can this change be used to facilitate software innovation? This paper proposes a set of values to guide the development of a methodology to facilitate software innovation....

  18. SEI Software Engineering Education Directory.

    Science.gov (United States)

    1987-02-01

    Planning, and Control, Kotler , P. Marketing Decision Making, Concepts and Strategy, Cravens Managerial Fnance: Essentials, Kroncke, C., Nammers, E., and...Textbooks: Applying Software Engineering Principles , Maria Systems: Cyber Turbo Dos Variety of Micros Courses: Introduction to Software Engineering...Assistant Professor of Computer Systems (513) 255-6913 Courses: Software Engineeing Managemrent EENG543 G N R A Textbooks: Principles of Productive

  19. Software engineering knowledge at your fingertips: Experiences with a software engineering-portal

    OpenAIRE

    Punter, T.; Kalmar, R.

    2003-01-01

    In order to keep up the pace with technology development, knowledge on Software Engineering (SE) methods, techniques, and tools is required. For an effective and efficient knowledge transfer, especially Small and Medium-sized Enterprises (SMEs) might benefit from Software Engineering Portals (SE-Portals). This paper provides an analysis of SE-Portals by distinguishing two types: 1) the Knowledge Portal and 2) the Knowledge & Community Portal. On behalf of the analysis we conclude that most SE...

  20. Software methodologies for the SSC

    International Nuclear Information System (INIS)

    Loken, S.C.

    1990-01-01

    This report describes some of the considerations that will determine how the author developed software for the SSC. He begins with a review of the general computing problem for SSC experiments and recent experiences in software engineering for the present generation of experiments. This leads to a discussion of the software technologies that will be critical for the SSC experiments. He describes the emerging software standards and commercial products that may be useful in addressing the SSC needs. He concludes with some comments on how collaborations and the SSC Lab should approach the software development issue

  1. Collected software engineering papers, volume 2

    Science.gov (United States)

    1983-01-01

    Topics addressed include: summaries of the software engineering laboratory (SEL) organization, operation, and research activities; results of specific research projects in the areas of resource models and software measures; and strategies for data collection for software engineering research.

  2. Qualified software development methodologies for nuclear class 1E equipment

    International Nuclear Information System (INIS)

    Koch, Shlomo; Ruether, J.

    1992-01-01

    This article describes the experience learned at Northern States Power and Spectrum Technologies, during the development of a computer based Safeguard Load Sequencer, for Prairie Island Nuclear Generating Plant. The Safeguard Load Sequencer (SLS) performs the function of 4kV emergency bus voltage restoration, load shedding, and emergency diesel generator loading. The system is designed around an Allen-Bradley PLC-5 programmable controller. The Safeguard Load Sequencer is the vehicle to demonstrate the software engineering procedures and methodologies. The article analyzes the requirements imposed by the NUREG 4640 handbook, and the relevant IEEE standards. The article tries to answer the question what is software engineering, and describe the waterfall life cycle phases of software development. The effects of each phase on software quality and V and V plan is described. Issues designing a V and V plan is addressed, and considerations of cost and time to implement the program are described. The article also addresses the subject of tools that can increase productivity and reduce the cost and time of an extensive V and V plan. It describes the tools the authors used, and more importantly presents a wish list of tools that they as developers would like to have. The role of testing is presented. They show that testing at the final stage has a lower impact on software quality then generally assumed. Full coverage of testing is almost always impossible, and they demonstrate how alternative audits and test during the development phase can improve software reliability

  3. A Cloverleaf of Software Engineering

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2005-01-01

    , however "lite". Third, despite 35 years of formal methods, the SE industry, maturity-wise still lags far behind that of other engineering disciplines. So we examine why. Finally, in several areas, in health care, in architecture, and others, we see that major undertakings are primarily spearheaded...... by senior academic staff. Professors of medicine daily perform specialized surgery and treatments at hospitals. Professors of architecture design new, daring buildings for industry, and professors of civil engineering head the engineering structural design of new, daring bridges. So we speculate what......We shall touch upon four issues of software engineering (SE): domain engineering, formal techniques, SE sociology, and academic software architects. First, before software can be designed one must understand its requirements; but before requirements can be formulated one must understand the domain...

  4. Software Engineering for Portability.

    Science.gov (United States)

    Stanchev, Ivan

    1990-01-01

    Discussion of the portability of educational software focuses on the software design and development process. Topics discussed include levels of portability; the user-computer dialog; software engineering principles; design techniques for student performance records; techniques of courseware programing; and suggestions for further research and…

  5. Is Chinese Software Engineering Professionalizing or Not?: Specialization of Knowledge, Subjective Identification and Professionalization

    Science.gov (United States)

    Yang, Yan

    2012-01-01

    Purpose: This paper aims to discuss the challenge for the classical idea of professionalism in understanding the Chinese software engineering industry after giving a close insight into the development of this industry as well as individual engineers with a psycho-societal perspective. Design/methodology/approach: The study starts with the general…

  6. A systematic review of applying modern software engineering techniques to developing robotic systems

    Directory of Open Access Journals (Sweden)

    Claudia Pons

    2012-01-01

    Full Text Available Robots have become collaborators in our daily life. While robotic systems become more and more complex, the need to engineer their software development grows as well. The traditional approaches used in developing these software systems are reaching their limits; currently used methodologies and tools fall short of addressing the needs of such complex software development. Separating robotics’ knowledge from short-cycled implementation technologies is essential to foster reuse and maintenance. This paper presents a systematic review (SLR of the current use of modern software engineering techniques for developing robotic software systems and their actual automation level. The survey was aimed at summarizing existing evidence concerning applying such technologies to the field of robotic systems to identify any gaps in current research to suggest areas for further investigation and provide a background for positioning new research activities.

  7. Addressing Software Engineering Issues in Real-Time Software ...

    African Journals Online (AJOL)

    Addressing Software Engineering Issues in Real-Time Software ... systems, manufacturing process, process control, military, space exploration, and ... but also physical properties such as timeliness, Quality of Service and reliability.

  8. Model-based Software Engineering

    DEFF Research Database (Denmark)

    Kindler, Ekkart

    2010-01-01

    The vision of model-based software engineering is to make models the main focus of software development and to automatically generate software from these models. Part of that idea works already today. But, there are still difficulties when it comes to behaviour. Actually, there is no lack in models...

  9. An Engineering Context for Software Engineering

    Science.gov (United States)

    2008-09-01

    predictable properties. The first two are due to Boehm as described in Pressman [Pre05] and called validation versus verification. 1. solving the right...Quality Software, 2nd ed., New York: Macmillan, 1991. [Pre05] Pressman , Roger, Software Engineering: A Practitioner’s Approach, Sixth Edition, McGraw

  10. Feminist Methodologies and Engineering Education Research

    Science.gov (United States)

    Beddoes, Kacey

    2013-01-01

    This paper introduces feminist methodologies in the context of engineering education research. It builds upon other recent methodology articles in engineering education journals and presents feminist research methodologies as a concrete engineering education setting in which to explore the connections between epistemology, methodology and theory.…

  11. Software And Systems Engineering Risk Management

    Science.gov (United States)

    2010-04-01

    RSKM 2004 COSO Enterprise RSKM Framework 2006 ISO/IEC 16085 Risk Management Process 2008 ISO/IEC 12207 Software Lifecycle Processes 2009 ISO/IEC...1 Software And Systems Engineering Risk Management John Walz VP Technical and Conferences Activities, IEEE Computer Society Vice-Chair Planning...Software & Systems Engineering Standards Committee, IEEE Computer Society US TAG to ISO TMB Risk Management Working Group Systems and Software

  12. Enhancing requirements engineering for patient registry software systems with evidence-based components.

    Science.gov (United States)

    Lindoerfer, Doris; Mansmann, Ulrich

    2017-07-01

    Patient registries are instrumental for medical research. Often their structures are complex and their implementations use composite software systems to meet the wide spectrum of challenges. Commercial and open-source systems are available for registry implementation, but many research groups develop their own systems. Methodological approaches in the selection of software as well as the construction of proprietary systems are needed. We propose an evidence-based checklist, summarizing essential items for patient registry software systems (CIPROS), to accelerate the requirements engineering process. Requirements engineering activities for software systems follow traditional software requirements elicitation methods, general software requirements specification (SRS) templates, and standards. We performed a multistep procedure to develop a specific evidence-based CIPROS checklist: (1) A systematic literature review to build a comprehensive collection of technical concepts, (2) a qualitative content analysis to define a catalogue of relevant criteria, and (3) a checklist to construct a minimal appraisal standard. CIPROS is based on 64 publications and covers twelve sections with a total of 72 items. CIPROS also defines software requirements. Comparing CIPROS with traditional software requirements elicitation methods, SRS templates and standards show a broad consensus but differences in issues regarding registry-specific aspects. Using an evidence-based approach to requirements engineering for registry software adds aspects to the traditional methods and accelerates the software engineering process for registry software. The method we used to construct CIPROS serves as a potential template for creating evidence-based checklists in other fields. The CIPROS list supports developers in assessing requirements for existing systems and formulating requirements for their own systems, while strengthening the reporting of patient registry software system descriptions. It may be

  13. Simulation software: engineer processes before reengineering.

    Science.gov (United States)

    Lepley, C J

    2001-01-01

    People make decisions all the time using intuition. But what happens when you are asked: "Are you sure your predictions are accurate? How much will a mistake cost? What are the risks associated with this change?" Once a new process is engineered, it is difficult to analyze what would have been different if other options had been chosen. Simulating a process can help senior clinical officers solve complex patient flow problems and avoid wasted efforts. Simulation software can give you the data you need to make decisions. The author introduces concepts, methodologies, and applications of computer aided simulation to illustrate their use in making decisions to improve workflow design.

  14. NASA Software Engineering Benchmarking Study

    Science.gov (United States)

    Rarick, Heather L.; Godfrey, Sara H.; Kelly, John C.; Crumbley, Robert T.; Wifl, Joel M.

    2013-01-01

    To identify best practices for the improvement of software engineering on projects, NASA's Offices of Chief Engineer (OCE) and Safety and Mission Assurance (OSMA) formed a team led by Heather Rarick and Sally Godfrey to conduct this benchmarking study. The primary goals of the study are to identify best practices that: Improve the management and technical development of software intensive systems; Have a track record of successful deployment by aerospace industries, universities [including research and development (R&D) laboratories], and defense services, as well as NASA's own component Centers; and Identify candidate solutions for NASA's software issues. Beginning in the late fall of 2010, focus topics were chosen and interview questions were developed, based on the NASA top software challenges. Between February 2011 and November 2011, the Benchmark Team interviewed a total of 18 organizations, consisting of five NASA Centers, five industry organizations, four defense services organizations, and four university or university R and D laboratory organizations. A software assurance representative also participated in each of the interviews to focus on assurance and software safety best practices. Interviewees provided a wealth of information on each topic area that included: software policy, software acquisition, software assurance, testing, training, maintaining rigor in small projects, metrics, and use of the Capability Maturity Model Integration (CMMI) framework, as well as a number of special topics that came up in the discussions. NASA's software engineering practices compared favorably with the external organizations in most benchmark areas, but in every topic, there were ways in which NASA could improve its practices. Compared to defense services organizations and some of the industry organizations, one of NASA's notable weaknesses involved communication with contractors regarding its policies and requirements for acquired software. One of NASA's strengths

  15. Software engineering ethics

    Science.gov (United States)

    Bown, Rodney L.

    1991-01-01

    Software engineering ethics is reviewed. The following subject areas are covered: lack of a system viewpoint; arrogance of PC DOS software vendors; violation od upward compatibility; internet worm; internet worm revisited; student cheating and company hiring interviews; computing practitioners and the commodity market; new projects and old programming languages; schedule and budget; and recent public domain comments.

  16. Software engineering : redundancy is key

    NARCIS (Netherlands)

    Brand, van den M.G.J.; Groote, J.F.

    2015-01-01

    Software engineers are humans and so they make lots of mistakes. Typically 1 out of 10 to 100 tasks go wrong. The only way to avoid these mistakes is to introduce redundancy in the software engineering process. This article is a plea to consciously introduce several levels of redundancy for each

  17. The present status of software engineering

    CERN Document Server

    Pressman, Roger S

    1991-01-01

    In this seminar, we will discuss the present status and future directions of software engeneering and CASE. Key topics to be discussed include: new paradigms for software engineering; software metrics; process assessment; the current state of analysis and design methods; reusability and re-engineering; formal methods. Among the questions to be answered are: How will software engineering change as the 1990s progress? What are the "technology drivers"? What will analysis, design, coding, testing, quality assurance and software management look like in the year 2000? How will CASE tools evolve in the 1990s and will they be as "integrated" as many people believe? How can you position your Organization to accommodate the coming changes?

  18. Software engineering techniques and CASE tools in RD13

    Science.gov (United States)

    Buono, S.; Gaponenko, I.; Jones, R.; Khodabandeh, A.; Mapelli, L.; Mornacchi, G.; Prigent, D.; Sanchez-Corral, E.; Skiadelli, M.; Toppers, A.; Duval, P. Y.; Ferrato, D.; Le Van Suu, A.; Qian, Z.; Rondot, C.; Ambrosini, G.; Fumagalli, G.; Polesello, G.; Aguer, M.; Huet, M.

    1994-12-01

    The RD13 project was approved in April 1991 for the development of a scalable data-taking system suitable for hosting various LHC studies. One of its goals is the exploitation of software engineering techniques, in order to indicate their overall suitability for data acquisition (DAQ), software design and implementation. This paper describes how such techniques have been applied to the development of components of the RD13 DAQ used in test-beam runs at CERN. We describe our experience with the Artifex CASE tool and its associated methodology. The issues raised when code generated by a CASE tool has to be integrated into an existing environment are also discussed.

  19. Collected Software Engineering Papers, Volume 10

    Science.gov (United States)

    1992-01-01

    This document is a collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) from Oct. 1991 - Nov. 1992. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. Additional information about the SEL and its research efforts may be obtained from the sources listed in the bibliography at the end of this document. For the convenience of this presentation, the 11 papers contained here are grouped into 5 major sections: (1) the Software Engineering Laboratory; (2) software tools studies; (3) software models studies; (4) software measurement studies; and (5) Ada technology studies.

  20. Software Engineering Frameworks: Textbooks vs. Student Perceptions

    Science.gov (United States)

    McMaster, Kirby; Hadfield, Steven; Wolthuis, Stuart; Sambasivam, Samuel

    2012-01-01

    This research examines the frameworks used by Computer Science and Information Systems students at the conclusion of their first semester of study of Software Engineering. A questionnaire listing 64 Software Engineering concepts was given to students upon completion of their first Software Engineering course. This survey was given to samples of…

  1. Software maintenance and evolution and automated software engineering

    NARCIS (Netherlands)

    Carver, Jeffrey C.; Serebrenik, Alexander

    2018-01-01

    This issue's column reports on the 33rd International Conference on Software Maintenance and Evolution and 32nd International Conference on Automated Software Engineering. Topics include flaky tests, technical debt, QA bots, and regular expressions.

  2. Information technology security system engineering methodology

    Science.gov (United States)

    Childs, D.

    2003-01-01

    A methodology is described for system engineering security into large information technology systems under development. The methodology is an integration of a risk management process and a generic system development life cycle process. The methodology is to be used by Security System Engineers to effectively engineer and integrate information technology security into a target system as it progresses through the development life cycle. The methodology can also be used to re-engineer security into a legacy system.

  3. Software Development for EECU Platform of Turbofan Engine

    Science.gov (United States)

    Kim, Bo Gyoung; Kwak, Dohyup; Kim, Byunghyun; Choi, Hee ju; Kong, Changduk

    2017-04-01

    The turbofan engine operation consists of a number of hardware and software. The engine is controlled by Electronic Engine Control Unit (EECU). In order to control the engine, EECU communicates with an aircraft system, Actuator Drive Unit (ADU), Engine Power Unit (EPU) and sensors on the engine. This paper tried to investigate the process form starting to taking-off and aims to design the EECU software mode and defined communication data format. The software is implemented according to the designed software mode.

  4. Software engineering beyond the project

    DEFF Research Database (Denmark)

    Dittrich, Yvonne

    2014-01-01

    Context The main part of software engineering methods, tools and technologies has developed around projects as the central organisational form of software development. A project organisation depends on clear bounds regarding scope, participants, development effort and lead-time. What happens when...... of traditional software engineering, but makes perfect sense, considering that the frame of reference for product development is not a project but continuous innovation across the respective ecosystem. The article provides a number of concrete points for further research....

  5. Methodology for economic evaluation of software development projects

    International Nuclear Information System (INIS)

    Witte, D.M.

    1990-01-01

    Many oil and gas exploration and production companies develop computer software in-house or with contract programmers to support their exploration activities. Software development projects compete for funding with exploration and development projects, though most companies lack valid comparison measures for the two types of projects. This paper presents a methodology of pro form a cash flow analysis for software development proposals intended for internal use. This methodology, based on estimates of development and support costs, exploration benefits, and probability of successful development and implementation, can be used to compare proposed software development projects directly with competing exploration proposals

  6. Reverse Engineering and Software Products Reuse to Teach Collaborative Web Portals: A Case Study with Final-Year Computer Science Students

    Science.gov (United States)

    Medina-Dominguez, Fuensanta; Sanchez-Segura, Maria-Isabel; Mora-Soto, Arturo; Amescua, Antonio

    2010-01-01

    The development of collaborative Web applications does not follow a software engineering methodology. This is because when university students study Web applications in general, and collaborative Web portals in particular, they are not being trained in the use of software engineering techniques to develop collaborative Web portals. This paper…

  7. Factors that Influence First-Career Choice of Undergraduate Engineers in Software Services Companies: A South Indian Experience

    Science.gov (United States)

    Gokuladas, V. K.

    2010-01-01

    Purpose: The purpose of this paper is to identify how undergraduate engineering students differ in their perception about software services companies in India based on variables like gender, locations of the college and branches of engineering. Design/methodology/approach: Data obtained from 560 undergraduate engineering students who had the…

  8. Happy software developers solve problems better: psychological measurements in empirical software engineering.

    Science.gov (United States)

    Graziotin, Daniel; Wang, Xiaofeng; Abrahamsson, Pekka

    2014-01-01

    For more than thirty years, it has been claimed that a way to improve software developers' productivity and software quality is to focus on people and to provide incentives to make developers satisfied and happy. This claim has rarely been verified in software engineering research, which faces an additional challenge in comparison to more traditional engineering fields: software development is an intellectual activity and is dominated by often-neglected human factors (called human aspects in software engineering research). Among the many skills required for software development, developers must possess high analytical problem-solving skills and creativity for the software construction process. According to psychology research, affective states-emotions and moods-deeply influence the cognitive processing abilities and performance of workers, including creativity and analytical problem solving. Nonetheless, little research has investigated the correlation between the affective states, creativity, and analytical problem-solving performance of programmers. This article echoes the call to employ psychological measurements in software engineering research. We report a study with 42 participants to investigate the relationship between the affective states, creativity, and analytical problem-solving skills of software developers. The results offer support for the claim that happy developers are indeed better problem solvers in terms of their analytical abilities. The following contributions are made by this study: (1) providing a better understanding of the impact of affective states on the creativity and analytical problem-solving capacities of developers, (2) introducing and validating psychological measurements, theories, and concepts of affective states, creativity, and analytical-problem-solving skills in empirical software engineering, and (3) raising the need for studying the human factors of software engineering by employing a multidisciplinary viewpoint.

  9. An algebraic approach to modeling in software engineering

    International Nuclear Information System (INIS)

    Loegel, C.J.; Ravishankar, C.V.

    1993-09-01

    Our work couples the formalism of universal algebras with the engineering techniques of mathematical modeling to develop a new approach to the software engineering process. Our purpose in using this combination is twofold. First, abstract data types and their specification using universal algebras can be considered a common point between the practical requirements of software engineering and the formal specification of software systems. Second, mathematical modeling principles provide us with a means for effectively analyzing real-world systems. We first use modeling techniques to analyze a system and then represent the analysis using universal algebras. The rest of the software engineering process exploits properties of universal algebras that preserve the structure of our original model. This paper describes our software engineering process and our experience using it on both research and commercial systems. We need a new approach because current software engineering practices often deliver software that is difficult to develop and maintain. Formal software engineering approaches use universal algebras to describe ''computer science'' objects like abstract data types, but in practice software errors are often caused because ''real-world'' objects are improperly modeled. There is a large semantic gap between the customer's objects and abstract data types. In contrast, mathematical modeling uses engineering techniques to construct valid models for real-world systems, but these models are often implemented in an ad hoc manner. A combination of the best features of both approaches would enable software engineering to formally specify and develop software systems that better model real systems. Software engineering, like mathematical modeling, should concern itself first and foremost with understanding a real system and its behavior under given circumstances, and then with expressing this knowledge in an executable form

  10. Green in software engineering

    CERN Document Server

    Calero Munoz, Coral

    2015-01-01

    This is the first book that presents a comprehensive overview of sustainability aspects in software engineering. Its format follows the structure of the SWEBOK and covers the key areas involved in the incorporation of green aspects in software engineering, encompassing topics from requirement elicitation to quality assurance and maintenance, while also considering professional practices and economic aspects. The book consists of thirteen chapters, which are structured in five parts. First the "Introduction" gives an overview of the primary general concepts related to Green IT, discussing wha

  11. A Study on the Quantitative Assessment Method of Software Requirement Documents Using Software Engineering Measures and Bayesian Belief Networks

    International Nuclear Information System (INIS)

    Eom, Heung Seop; Kang, Hyun Gook; Park, Ki Hong; Kwon, Kee Choon; Chang, Seung Cheol

    2005-01-01

    One of the major challenges in using the digital systems in a NPP is the reliability estimation of safety critical software embedded in the digital safety systems. Precise quantitative assessment of the reliability of safety critical software is nearly impossible, since many of the aspects to be considered are of qualitative nature and not directly measurable, but they have to be estimated for a practical use. Therefore an expert's judgment plays an important role in estimating the reliability of the software embedded in safety-critical systems in practice, because they can deal with all the diverse evidence relevant to the reliability and can perform an inference based on the evidence. But, in general, the experts' way of combining the diverse evidence and performing an inference is usually informal and qualitative, which is hard to discuss and will eventually lead to a debate about the conclusion. We have been carrying out research on a quantitative assessment of the reliability of safety critical software using Bayesian Belief Networks (BBN). BBN has been proven to be a useful modeling formalism because a user can represent a complex set of events and relationships in a fashion that can easily be interpreted by others. In the previous works we have assessed a software requirement specification of a reactor protection system by using our BBN-based assessment model. The BBN model mainly employed an expert's subjective probabilities as inputs. In the process of assessing the software requirement documents we found out that the BBN model was excessively dependent on experts' subjective judgments in a large part. Therefore, to overcome the weakness of our methodology we employed conventional software engineering measures into the BBN model as shown in this paper. The quantitative relationship between the conventional software measures and the reliability of software were not identified well in the past. Then recently there appeared a few researches on a ranking of

  12. PBL-SEE: An Authentic Assessment Model for PBL-Based Software Engineering Education

    Science.gov (United States)

    dos Santos, Simone C.

    2017-01-01

    The problem-based learning (PBL) approach has been successfully applied to teaching software engineering thanks to its principles of group work, learning by solving real problems, and learning environments that match the market realities. However, the lack of well-defined methodologies and processes for implementing the PBL approach represents a…

  13. V&V Within Reuse-Based Software Engineering

    Science.gov (United States)

    Addy, Edward A.

    1996-01-01

    Verification and Validation (V&V) is used to increase the level of assurance of critical software, particularly that of safety-critical and mission-critical software. V&V is a systems engineering discipline that evaluates the software in a systems context, and is currently applied during the development of a specific application system. In order to bring the effectiveness of V&V to bear within reuse-based software engineering, V&V must be incorporated within the domain engineering process.

  14. Software engineering frameworks for the cloud computing paradigm

    CERN Document Server

    Mahmood, Zaigham

    2013-01-01

    This book presents the latest research on Software Engineering Frameworks for the Cloud Computing Paradigm, drawn from an international selection of researchers and practitioners. The book offers both a discussion of relevant software engineering approaches and practical guidance on enterprise-wide software deployment in the cloud environment, together with real-world case studies. Features: presents the state of the art in software engineering approaches for developing cloud-suitable applications; discusses the impact of the cloud computing paradigm on software engineering; offers guidance an

  15. Traceability Method for Software Engineering Documentation

    OpenAIRE

    Nur Adila Azram; Rodziah Atan

    2012-01-01

    Traceability has been widely discussed in research area. It has been one of interest topic to be research in software engineering. Traceability in software documentation is one of the interesting topics to be research further. It is important in software documentation to trace out the flow or process in all the documents whether they depends with one another or not. In this paper, we present a traceability method for software engineering documentation. The objective of this research is to fac...

  16. Software engineering and the role of Ada: Executive seminar

    Science.gov (United States)

    Freedman, Glenn B.

    1987-01-01

    The objective was to introduce the basic terminology and concepts of software engineering and Ada. The life cycle model is reviewed. The application of the goals and principles of software engineering is applied. An introductory understanding of the features of the Ada language is gained. Topics addressed include: the software crises; the mandate of the Space Station Program; software life cycle model; software engineering; and Ada under the software engineering umbrella.

  17. Requirements engineering: foundation for software quality

    NARCIS (Netherlands)

    Daneva, Maia; Pastor, Oscar

    2016-01-01

    Welcome to the proceedings of the 22nd edition of REFSQ: the International Working Conference on Requirements Engineering – Foundation for Software Quality! Requirements engineering (RE) has been recognized as a critical factor that impacts the quality of software, systems, and services. Since the

  18. Data systems and computer science: Software Engineering Program

    Science.gov (United States)

    Zygielbaum, Arthur I.

    1991-01-01

    An external review of the Integrated Technology Plan for the Civil Space Program is presented. This review is specifically concerned with the Software Engineering Program. The goals of the Software Engineering Program are as follows: (1) improve NASA's ability to manage development, operation, and maintenance of complex software systems; (2) decrease NASA's cost and risk in engineering complex software systems; and (3) provide technology to assure safety and reliability of software in mission critical applications.

  19. Unified Engineering Software System

    Science.gov (United States)

    Purves, L. R.; Gordon, S.; Peltzman, A.; Dube, M.

    1989-01-01

    Collection of computer programs performs diverse functions in prototype engineering. NEXUS, NASA Engineering Extendible Unified Software system, is research set of computer programs designed to support full sequence of activities encountered in NASA engineering projects. Sequence spans preliminary design, design analysis, detailed design, manufacturing, assembly, and testing. Primarily addresses process of prototype engineering, task of getting single or small number of copies of product to work. Written in FORTRAN 77 and PROLOG.

  20. Professional Ethics of Software Engineers: An Ethical Framework.

    Science.gov (United States)

    Lurie, Yotam; Mark, Shlomo

    2016-04-01

    The purpose of this article is to propose an ethical framework for software engineers that connects software developers' ethical responsibilities directly to their professional standards. The implementation of such an ethical framework can overcome the traditional dichotomy between professional skills and ethical skills, which plagues the engineering professions, by proposing an approach to the fundamental tasks of the practitioner, i.e., software development, in which the professional standards are intrinsically connected to the ethical responsibilities. In so doing, the ethical framework improves the practitioner's professionalism and ethics. We call this approach Ethical-Driven Software Development (EDSD), as an approach to software development. EDSD manifests the advantages of an ethical framework as an alternative to the all too familiar approach in professional ethics that advocates "stand-alone codes of ethics". We believe that one outcome of this synergy between professional and ethical skills is simply better engineers. Moreover, since there are often different software solutions, which the engineer can provide to an issue at stake, the ethical framework provides a guiding principle, within the process of software development, that helps the engineer evaluate the advantages and disadvantages of different software solutions. It does not and cannot affect the end-product in and of-itself. However, it can and should, make the software engineer more conscious and aware of the ethical ramifications of certain engineering decisions within the process.

  1. Software Engineering Education: Some Important Dimensions

    Science.gov (United States)

    Mishra, Alok; Cagiltay, Nergiz Ercil; Kilic, Ozkan

    2007-01-01

    Software engineering education has been emerging as an independent and mature discipline. Accordingly, various studies are being done to provide guidelines for curriculum design. The main focus of these guidelines is around core and foundation courses. This paper summarizes the current problems of software engineering education programs. It also…

  2. Improving Software Engineering on NASA Projects

    Science.gov (United States)

    Crumbley, Tim; Kelly, John C.

    2010-01-01

    Software Engineering Initiative: Reduces risk of software failure -Increases mission safety. More predictable software cost estimates and delivery schedules. Smarter buyer of contracted out software. More defects found and removed earlier. Reduces duplication of efforts between projects. Increases ability to meet the challenges of evolving software technology.

  3. Software Engineering Environment for Component-based Design of Embedded Software

    DEFF Research Database (Denmark)

    Guo, Yu

    2010-01-01

    as well as application models in a computer-aided software engineering environment. Furthermore, component models have been realized following carefully developed design patterns, which provide for an efficient and reusable implementation. The components have been ultimately implemented as prefabricated...... executable objects that can be linked together into an executable application. The development of embedded software using the COMDES framework is supported by the associated integrated engineering environment consisting of a number of tools, which support basic functionalities, such as system modelling......, validation, and executable code generation for specific hardware platforms. Developing such an environment and the associated tools is a highly complex engineering task. Therefore, this thesis has investigated key design issues and analysed existing platforms supporting model-driven software development...

  4. Interactive learning software for electrical engineering subjects ...

    African Journals Online (AJOL)

    Interactive learning software for electrical engineering subjects using MATLAB and ... Keywords: electrical engineering; MATLAB; graphic user interface (GUI); educational software. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  5. Teaching Agile Software Engineering Using Problem-Based Learning

    Science.gov (United States)

    El-Khalili, Nuha H.

    2013-01-01

    Many studies have reported the utilization of Problem-Based Learning (PBL) in teaching Software Engineering courses. However, these studies have different views of the effectiveness of PBL. This paper presents the design of an Advanced Software Engineering course for undergraduate Software Engineering students that uses PBL to teach them Agile…

  6. A Methodology for Assessing Software Releasibility

    National Research Council Canada - National Science Library

    Kochan, Matthew

    1997-01-01

    .... This thesis proposes a new methodology which addresses this tradeoff. The term "releasable" Software is introduced as a product which demonstrates a fault content acceptable to users in the field...

  7. A reflection on Software Engineering in HEP

    International Nuclear Information System (INIS)

    Carminati, Federico

    2012-01-01

    High Energy Physics (HEP) has been making very extensive usage of computers to achieve its research goals. Fairly large program suites have been developed, maintained and used over the years and it is fair to say that, overall, HEP has been successful in software development. Yet, HEP software development has not used classical Software Engineering techniques, which have been invented and refined to help the production of large programmes. In this paper we will review the development of HEP code with its strengths and weaknesses. Using several well-known HEP software projects as examples, we will try to demonstrate that our community has used a form of Software Engineering, albeit in an informal manner. The software development techniques employed in these projects are indeed very close in many aspects to the modern tendencies of Software Engineering itself, in particular the so-called “agile technologies”. The paper will conclude with an outlook on the future of software development in HEP.

  8. Software Intensive Systems

    National Research Council Canada - National Science Library

    Horvitz, E; Katz, D. J; Rumpf, R. L; Shrobe, H; Smith, T. B; Webber, G. E; Williamson, W. E; Winston, P. H; Wolbarsht, James L

    2006-01-01

    .... Additionally, recommend that DoN invest in software engineering, particularly as it complements commercial industry developments and promotes the application of systems engineering methodology...

  9. Analysis of Software Development Methodologies to Build Safety Software Applications for the SATEX-II: A Mexican Experimental Satellite

    Science.gov (United States)

    Aguilar Cisneros, Jorge; Vargas Martinez, Hector; Pedroza Melendez, Alejandro; Alonso Arevalo, Miguel

    2013-09-01

    Mexico is a country where the experience to build software for satellite applications is beginning. This is a delicate situation because in the near future we will need to develop software for the SATEX-II (Mexican Experimental Satellite). SATEX- II is a SOMECyTA's project (the Mexican Society of Aerospace Science and Technology). We have experienced applying software development methodologies, like TSP (Team Software Process) and SCRUM in other areas. Then, we analyzed these methodologies and we concluded: these can be applied to develop software for the SATEX-II, also, we supported these methodologies with SSP-05-0 Standard in particular with ESA PSS-05-11. Our analysis was focusing on main characteristics of each methodology and how these methodologies could be used with the ESA PSS 05-0 Standards. Our outcomes, in general, may be used by teams who need to build small satellites, but, in particular, these are going to be used when we will build the on board software applications for the SATEX-II.

  10. Readings in artificial intelligence and software engineering

    CERN Document Server

    Rich, Charles

    1986-01-01

    Readings in Artificial Intelligence and Software Engineering covers the main techniques and application of artificial intelligence and software engineering. The ultimate goal of artificial intelligence applied to software engineering is automatic programming. Automatic programming would allow a user to simply say what is wanted and have a program produced completely automatically. This book is organized into 11 parts encompassing 34 chapters that specifically tackle the topics of deductive synthesis, program transformations, program verification, and programming tutors. The opening parts p

  11. Teaching cloud computing: a software engineering perspective

    OpenAIRE

    Sommerville, Ian

    2012-01-01

    This short papers discusses the issues of teaching cloud computing from a software engineering rather than a business perspective. It discusses what topics might be covered in a senior course on cloud software engineering.

  12. SWEBOS – The Software Engineering Body of Skills

    Directory of Open Access Journals (Sweden)

    Yvonne Sedelmaier

    2015-02-01

    Full Text Available The development of complex software systems requires a mixture of various technical and non-technical competencies. While some guidelines exist which technical knowledge is required to make a good software engineer, there is a lack of insight as to which non-technical or soft skills are necessary to master complex software projects. This paper proposes a body of skills (SWEBOS for soft-ware engineering. The collection of necessary skills is developed on the basis of a clear, data-driven research design. The resulting required soft skills for software engineering are described precisely and semantically rich in a three-level structure. This approach guarantees that skills are not just characterized in a broad and general manner, but rather they are specifically adapted to the domain of software engineering.

  13. A software engineering process for safety-critical software application

    International Nuclear Information System (INIS)

    Kang, Byung Heon; Kim, Hang Bae; Chang, Hoon Seon; Jeon, Jong Sun

    1995-01-01

    Application of computer software to safety-critical systems in on the increase. To be successful, the software must be designed and constructed to meet the functional and performance requirements of the system. For safety reason, the software must be demonstrated not only to meet these requirements, but also to operate safely as a component within the system. For longer-term cost consideration, the software must be designed and structured to ease future maintenance and modifications. This paper presents a software engineering process for the production of safety-critical software for a nuclear power plant. The presentation is expository in nature of a viable high quality safety-critical software development. It is based on the ideas of a rational design process and on the experience of the adaptation of such process in the production of the safety-critical software for the shutdown system number two of Wolsung 2, 3 and 4 nuclear power generation plants. This process is significantly different from a conventional process in terms of rigorous software development phases and software design techniques, The process covers documentation, design, verification and testing using mathematically precise notations and highly reviewable tabular format to specify software requirements and software requirements and software requirements and code against software design using static analysis. The software engineering process described in this paper applies the principle of information-hiding decomposition in software design using a modular design technique so that when a change is required or an error is detected, the affected scope can be readily and confidently located. it also facilitates a sense of high degree of confidence in the 'correctness' of the software production, and provides a relatively simple and straightforward code implementation effort. 1 figs., 10 refs. (Author)

  14. Supporting Usability Engineering in Small Software Development Organizations

    DEFF Research Database (Denmark)

    Bornoe, Nis; Stage, Jan

    2013-01-01

    Despite an interest and use of different usability engineering methods small software development organizations find it challenging to implement usability engineering into the software development process. We present the results from a study about usability engineering in practice. Through a series...... of semistructured interviews we want to get an understanding of how usability is implemented into the organizations and how it’s practiced in reality. We found that the developers found it problematic to combine agile software development methods with classic usability engineering methods. A lack of solid usability...... engineering expertise and not least experience seems to be a main obstacle for a successful implementation of usability engineering into current software development practices. They are requesting methods and procedures that fit better with their current practices and strategies to implement usability...

  15. EXPERIENCES INITIATING SOFTWARE PRODUCT LINE ENGINEERING IN SMALL TEAMS WITH PULSE

    DEFF Research Database (Denmark)

    Mærsk-Møller, Hans Martin; Jørgensen, Bo Nørregaard

    2010-01-01

    Small teams of software engineers are represented both in small companies and semi-independent fractions in medium and large companies. Even though some results and experience papers have been published in the context of Small- and Medium-Sized Enterprises (SMEs), there is a lack of experience pa...... an existing methodology, PuLSETM, drew advantages of NetBeans Rich Client Platform, and based the product line on the existing application....

  16. Distribution and communication in software engineering environments. Application to the HELIOS Software Bus.

    OpenAIRE

    Jean, F. C.; Jaulent, M. C.; Coignard, J.; Degoulet, P.

    1991-01-01

    Modularity, distribution and integration are current trends in Software Engineering. To reach these goals HELIOS, a distributive Software Engineering Environment dedicated to the medical field, has been conceived and a prototype implemented. This environment is made by the collaboration of several, well encapsulated Software Components. This paper presents the architecture retained to allow communication between the different components and focus on the implementation details of the Software ...

  17. Software engineering practices for control system reliability

    International Nuclear Information System (INIS)

    S. K. Schaffner; K. S White

    1999-01-01

    This paper will discuss software engineering practices used to improve Control System reliability. The authors begin with a brief discussion of the Software Engineering Institute's Capability Maturity Model (CMM) which is a framework for evaluating and improving key practices used to enhance software development and maintenance capabilities. The software engineering processes developed and used by the Controls Group at the Thomas Jefferson National Accelerator Facility (Jefferson Lab), using the Experimental Physics and Industrial Control System (EPICS) for accelerator control, are described. Examples are given of how their procedures have been used to minimized control system downtime and improve reliability. While their examples are primarily drawn from their experience with EPICS, these practices are equally applicable to any control system. Specific issues addressed include resource allocation, developing reliable software lifecycle processes and risk management

  18. Requirements engineering for software and systems

    CERN Document Server

    Laplante, Phillip A

    2014-01-01

    Solid requirements engineering has increasingly been recognized as the key to improved, on-time and on-budget delivery of software and systems projects. This book provides practical teaching for graduate and professional systems and software engineers. It uses extensive case studies and exercises to help students grasp concepts and techniques. With a focus on software-intensive systems, this text provides a probing and comprehensive review of recent developments in intelligent systems, soft computing techniques, and their diverse applications in manufacturing. The second edition contains 100% revised content and approximately 30% new material

  19. Collected software engineering papers, volume 8

    Science.gov (United States)

    1990-01-01

    A collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) during the period November 1989 through October 1990 is presented. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. Additional information about the SEL and its research efforts may be obtained from the sources listed in the bibliography. The seven presented papers are grouped into four major categories: (1) experimental research and evaluation of software measurement; (2) studies on models for software reuse; (3) a software tool evaluation; and (4) Ada technology and studies in the areas of reuse and specification.

  20. Good practices for educational software engineering projects

    NARCIS (Netherlands)

    van der Duim, Louwarnoud; Andersson, Jesper; Sinnema, Marco

    2007-01-01

    Recent publications indicate the importance of software engineering in the computer science curriculum. In this paper, we present the final part of software engineering education at University of Groningen in the Netherlands and Vaxjo University in Sweden, where student teams perform an industrial

  1. Selection of software for mechanical engineering undergraduates

    International Nuclear Information System (INIS)

    Cheah, C. T.; Yin, C. S.; Halim, T.; Naser, J.; Blicblau, A. S.

    2016-01-01

    A major problem with the undergraduate mechanical course is the limited exposure of students to software packages coupled with the long learning curve on the existing software packages. This work proposes the use of appropriate software packages for the entire mechanical engineering curriculum to ensure students get sufficient exposure real life design problems. A variety of software packages are highlighted as being suitable for undergraduate work in mechanical engineering, e.g. simultaneous non-linear equations; uncertainty analysis; 3-D modeling software with the FEA; analysis tools for the solution of problems in thermodynamics, fluid mechanics, mechanical system design, and solid mechanics.

  2. Selection of software for mechanical engineering undergraduates

    Energy Technology Data Exchange (ETDEWEB)

    Cheah, C. T.; Yin, C. S.; Halim, T.; Naser, J.; Blicblau, A. S., E-mail: ablicblau@swin.edu.au [Swinburne University of Technology, Faculty of Science Engineering and Technology, PO Box 218 Hawthorn, Victoria, Australia, 3122 (Australia)

    2016-07-12

    A major problem with the undergraduate mechanical course is the limited exposure of students to software packages coupled with the long learning curve on the existing software packages. This work proposes the use of appropriate software packages for the entire mechanical engineering curriculum to ensure students get sufficient exposure real life design problems. A variety of software packages are highlighted as being suitable for undergraduate work in mechanical engineering, e.g. simultaneous non-linear equations; uncertainty analysis; 3-D modeling software with the FEA; analysis tools for the solution of problems in thermodynamics, fluid mechanics, mechanical system design, and solid mechanics.

  3. Performing Verification and Validation in Reuse-Based Software Engineering

    Science.gov (United States)

    Addy, Edward A.

    1999-01-01

    The implementation of reuse-based software engineering not only introduces new activities to the software development process, such as domain analysis and domain modeling, it also impacts other aspects of software engineering. Other areas of software engineering that are affected include Configuration Management, Testing, Quality Control, and Verification and Validation (V&V). Activities in each of these areas must be adapted to address the entire domain or product line rather than a specific application system. This paper discusses changes and enhancements to the V&V process, in order to adapt V&V to reuse-based software engineering.

  4. Data structure and software engineering challenges and improvements

    CERN Document Server

    Antonakos, James L

    2011-01-01

    Data structure and software engineering is an integral part of computer science. This volume presents new approaches and methods to knowledge sharing, brain mapping, data integration, and data storage. The author describes how to manage an organization's business process and domain data and presents new software and hardware testing methods. The book introduces a game development framework used as a learning aid in a software engineering at the university level. It also features a review of social software engineering metrics and methods for processing business information. It explains how to

  5. Collected software engineering papers, volume 9

    Science.gov (United States)

    1991-01-01

    This document is a collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) from November 1990 through October 1991. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. This is the ninth such volume of technical papers produced by the SEL. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. For the convenience of this presentation, the eight papers contained here are grouped into three major categories: (1) software models studies; (2) software measurement studies; and (3) Ada technology studies. The first category presents studies on reuse models, including a software reuse model applied to maintenance and a model for an organization to support software reuse. The second category includes experimental research methods and software measurement techniques. The third category presents object-oriented approaches using Ada and object-oriented features proposed for Ada. The SEL is actively working to understand and improve the software development process at GSFC.

  6. MODELI: An Emotion-Based Software Engineering Methodology for the Development of Digital Learning Objects for the Preservation of the Mixtec Language

    Directory of Open Access Journals (Sweden)

    Olivia Allende-Hernández

    2015-07-01

    Full Text Available In this paper, a methodology termed MODELI (methodology for the design of educational digital objects for indigenous languages is presented for the development of digital learning objects (DLOs for the Mixtec language, which is an indigenous Mexican language. MODELI is based on the spiral model of software development and integrates three important aspects for the analysis and design of DLOs: pedagogical, affective-emotional and technological-functional. The premise of MODELI is that the emotional aspect with the inclusion of cultural factors has an important effect on the learning motivation of indigenous users when interacting with the DLO. Principles of the visual, auditory (or aural, read/write, kinesthetic (VARK model and Kansei engineering were considered for the inclusion of the pedagogical, emotional and technological-functional aspects within the spiral model for the development of MODELI. The methodology was validated with the development of a DLO for a previously unknown variant of the Mixtec language. Usability tests of the DLO built with MODELI evidenced an improvement on the learning motivation and the value of cultural identity of indigenous children. These results are important for the preservation of indigenous languages in Mexico, because most of them are partially documented, and there is social rejection of indigenous culture caused by discrimination of ethnic communities.

  7. Software engineering design theory and practice

    CERN Document Server

    Otero, Carlos

    2012-01-01

    … intended for use as a textbook for an advanced course in software design. Each chapter ends with review questions and references. … provides an overview of the software development process, something that would not be out of line in a course on software engineering including such topics as software process, software management, balancing conflicting values of stakeholders, testing, quality, and ethics. The author has principally focused on software design though, extracting the design phase from the surrounding software development lifecycle. … Software design strategies are addressed

  8. Reflections on Courses for Software Language Engineering

    NARCIS (Netherlands)

    Bagge, A.H.; Lämmel, R.; Zaytsev, V.; Demuth, B.; Stikkolorum, D.

    2014-01-01

    Software Language Engineering (SLE) has emerged as a field in computer science research and software engineering, but it has yet to become entrenched as part of the standard curriculum at universities. Many places have a compiler construction (CC) course and a programming languages (PL) course, but

  9. Computer, Network, Software, and Hardware Engineering with Applications

    CERN Document Server

    Schneidewind, Norman F

    2012-01-01

    There are many books on computers, networks, and software engineering but none that integrate the three with applications. Integration is important because, increasingly, software dominates the performance, reliability, maintainability, and availability of complex computer and systems. Books on software engineering typically portray software as if it exists in a vacuum with no relationship to the wider system. This is wrong because a system is more than software. It is comprised of people, organizations, processes, hardware, and software. All of these components must be considered in an integr

  10. Engineering bioinformatics: building reliability, performance and productivity into bioinformatics software.

    Science.gov (United States)

    Lawlor, Brendan; Walsh, Paul

    2015-01-01

    There is a lack of software engineering skills in bioinformatic contexts. We discuss the consequences of this lack, examine existing explanations and remedies to the problem, point out their shortcomings, and propose alternatives. Previous analyses of the problem have tended to treat the use of software in scientific contexts as categorically different from the general application of software engineering in commercial settings. In contrast, we describe bioinformatic software engineering as a specialization of general software engineering, and examine how it should be practiced. Specifically, we highlight the difference between programming and software engineering, list elements of the latter and present the results of a survey of bioinformatic practitioners which quantifies the extent to which those elements are employed in bioinformatics. We propose that the ideal way to bring engineering values into research projects is to bring engineers themselves. We identify the role of Bioinformatic Engineer and describe how such a role would work within bioinformatic research teams. We conclude by recommending an educational emphasis on cross-training software engineers into life sciences, and propose research on Domain Specific Languages to facilitate collaboration between engineers and bioinformaticians.

  11. Engineering bioinformatics: building reliability, performance and productivity into bioinformatics software

    Science.gov (United States)

    Lawlor, Brendan; Walsh, Paul

    2015-01-01

    There is a lack of software engineering skills in bioinformatic contexts. We discuss the consequences of this lack, examine existing explanations and remedies to the problem, point out their shortcomings, and propose alternatives. Previous analyses of the problem have tended to treat the use of software in scientific contexts as categorically different from the general application of software engineering in commercial settings. In contrast, we describe bioinformatic software engineering as a specialization of general software engineering, and examine how it should be practiced. Specifically, we highlight the difference between programming and software engineering, list elements of the latter and present the results of a survey of bioinformatic practitioners which quantifies the extent to which those elements are employed in bioinformatics. We propose that the ideal way to bring engineering values into research projects is to bring engineers themselves. We identify the role of Bioinformatic Engineer and describe how such a role would work within bioinformatic research teams. We conclude by recommending an educational emphasis on cross-training software engineers into life sciences, and propose research on Domain Specific Languages to facilitate collaboration between engineers and bioinformaticians. PMID:25996054

  12. On teaching software engineering based on formal techniques

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2001-01-01

    thoughts about and plans for a different software engineering text book peter Lucas Farewell Symposium......thoughts about and plans for a different software engineering text book peter Lucas Farewell Symposium...

  13. Cooperative and human aspects of software engineering: CHASE 2010

    DEFF Research Database (Denmark)

    Dittrich, Yvonne; Sharp, Helen C.; Winschiers Theophilus, Heike

    2010-01-01

    Software is created by people -- software engineers in cooperation with domain experts, users and other stakeholders--in varied environments, under various conditions. Thus understanding cooperative and human aspects of software development is crucial to comprehend how and which methods and tools...... are required, to improve the creation and maintenance of software. The 3rd workshop on Cooperative and Human Aspects of Software Engineering held at the International Conference on Software Engineering continued the tradition from earlier workshops and provided a lively forum to discuss current developments...... and high quality research in the field. Further dissemination of research results will lead to an improvement of software development and deployment across the globe....

  14. A Methodological Framework for Software Safety in Safety Critical Computer Systems

    OpenAIRE

    P. V. Srinivas Acharyulu; P. Seetharamaiah

    2012-01-01

    Software safety must deal with the principles of safety management, safety engineering and software engineering for developing safety-critical computer systems, with the target of making the system safe, risk-free and fail-safe in addition to provide a clarified differentaition for assessing and evaluating the risk, with the principles of software risk management. Problem statement: Prevailing software quality models, standards were not subsisting in adequately addressing the software safety ...

  15. Sandia software guidelines: Volume 5, Tools, techniques, and methodologies

    Energy Technology Data Exchange (ETDEWEB)

    1989-07-01

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. This volume describes software tools and methodologies available to Sandia personnel for the development of software, and outlines techniques that have proven useful within the Laboratories and elsewhere. References and evaluations by Sandia personnel are included. 6 figs.

  16. Comparison of Problem Solving from Engineering Design to Software Design

    DEFF Research Database (Denmark)

    Ahmed-Kristensen, Saeema; Babar, Muhammad Ali

    2012-01-01

    Observational studies of engineering design activities can inform the research community on the problem solving models that are employed by professional engineers. Design is defined as an ill-defined problem which includes both engineering design and software design, hence understanding problem...... solving models from other design domains is of interest to the engineering design community. For this paper an observational study of two software design sessions performed for the workshop on “Studying professional Software Design” is compared to analysis from engineering design. These findings provide...... useful insights of how software designers move from a problem domain to a solution domain and the commonalities between software designers’ and engineering designers’ design activities. The software designers were found to move quickly to a detailed design phase, employ co-.evolution and adopt...

  17. Comparison of Problem Solving from Engineering Design to Software Design

    DEFF Research Database (Denmark)

    Ahmed-Kristensen, Saeema; Babar, Muhammad Ali

    2012-01-01

    solving models from other design domains is of interest to the engineering design community. For this paper an observational study of two software design sessions performed for the workshop on “Studying professional Software Design” is compared to analysis from engineering design. These findings provide......Observational studies of engineering design activities can inform the research community on the problem solving models that are employed by professional engineers. Design is defined as an ill-defined problem which includes both engineering design and software design, hence understanding problem...... useful insights of how software designers move from a problem domain to a solution domain and the commonalities between software designers’ and engineering designers’ design activities. The software designers were found to move quickly to a detailed design phase, employ co-.evolution and adopt...

  18. Towards a Controlled Vocabulary on Software Engineering Education

    Science.gov (United States)

    Pizard, Sebastián; Vallespir, Diego

    2017-01-01

    Software engineering is the discipline that develops all the aspects of the production of software. Although there are guidelines about what topics to include in a software engineering curricula, it is usually unclear which are the best methods to teach them. In any science discipline the construction of a classification schema is a common…

  19. The integration of automated knowledge acquisition with computer-aided software engineering for space shuttle expert systems

    Science.gov (United States)

    Modesitt, Kenneth L.

    1990-01-01

    A prediction was made that the terms expert systems and knowledge acquisition would begin to disappear over the next several years. This is not because they are falling into disuse; it is rather that practitioners are realizing that they are valuable adjuncts to software engineering, in terms of problem domains addressed, user acceptance, and in development methodologies. A specific problem was discussed, that of constructing an automated test analysis system for the Space Shuttle Main Engine. In this domain, knowledge acquisition was part of requirements systems analysis, and was performed with the aid of a powerful inductive ESBT in conjunction with a computer aided software engineering (CASE) tool. The original prediction is not a very risky one -- it has already been accomplished.

  20. Competence Centered Specialization in Web Engineering Topics in a Software Engineering Masters Degree Programme

    DEFF Research Database (Denmark)

    Dolog, Peter; Thomsen, Lone Leth; Thomsen, Bent

    2010-01-01

    Web applications and Web-based systems are becoming increasingly complex as a result of either customer requests or technology evolution which has eased other aspects of software engineering. Therefore, there is an increasing demand for highly skilled software engineers able to build and also...... advance the systems on the one hand as well as professionals who are able to evaluate their eectiveness on the other hand. With this idea in mind, the computer science department at Aalborg University is continuously working on improvements in its specialization in web engineering topics as well...... as on general competence based web engineering proles oered also for those who specialize in other areas of software engineering. We describe the current state of the art and our experience with a web engineering curriculum within the software engineering masters degree programme. We also discuss an evolution...

  1. The need for scientific software engineering in the pharmaceutical industry.

    Science.gov (United States)

    Luty, Brock; Rose, Peter W

    2017-03-01

    Scientific software engineering is a distinct discipline from both computational chemistry project support and research informatics. A scientific software engineer not only has a deep understanding of the science of drug discovery but also the desire, skills and time to apply good software engineering practices. A good team of scientific software engineers can create a software foundation that is maintainable, validated and robust. If done correctly, this foundation enable the organization to investigate new and novel computational ideas with a very high level of efficiency.

  2. The need for scientific software engineering in the pharmaceutical industry

    Science.gov (United States)

    Luty, Brock; Rose, Peter W.

    2017-03-01

    Scientific software engineering is a distinct discipline from both computational chemistry project support and research informatics. A scientific software engineer not only has a deep understanding of the science of drug discovery but also the desire, skills and time to apply good software engineering practices. A good team of scientific software engineers can create a software foundation that is maintainable, validated and robust. If done correctly, this foundation enable the organization to investigate new and novel computational ideas with a very high level of efficiency.

  3. Using ethnographic methods in software engineering research

    DEFF Research Database (Denmark)

    Sharp, Helen, C.; Dittrich, Yvonne; De Souza, Cleidson

    2010-01-01

    This tutorial provides an overview of the role of ethnography in Software Engineering research. It describes the use of ethnographic methods as a means to provide an in-depth understanding of the socio-technological realities surrounding everyday software development practice. The knowledge gained......-depth discussion of methods for data collection and analysis used in ethnographic studies. It then describes how these methods can be and have been used by software engineering researchers to understand developers' work practices, to inform the development of processes, methods and tools and to evaluate...... can be used to improve processes, methods and tools as well as develop observed industrial practices. The tutorial begins with a brief historical account of ethnography in the fields of Software Engineering, CSCW, Information Systems and other related areas. This sets the stage for a more in...

  4. A Multidimensional Software Engineering Course

    Science.gov (United States)

    Barzilay, O.; Hazzan, O.; Yehudai, A.

    2009-01-01

    Software engineering (SE) is a multidimensional field that involves activities in various areas and disciplines, such as computer science, project management, and system engineering. Though modern SE curricula include designated courses that address these various subjects, an advanced summary course that synthesizes them is still missing. Such a…

  5. Interaction between systems and software engineering in safety-critical systems

    International Nuclear Information System (INIS)

    Knight, J.

    1994-01-01

    There are three areas of concern: when is software to be considered safe; what, exactly, is the role of the software engineer; and how do systems, or sometimes applications, engineers and software engineers interact with each other. The author presents his perspective on these questions which he feels differ from those of many in the field. He argues for a clear definition of safety in the software arena, so the engineer knows what he is engineering toward. Software must be viewed as part of the entire system, since it does not function on its own, or isolation. He argues for the establishment of clear specifications in this area

  6. Future of Software Engineering Standards

    Science.gov (United States)

    Poon, Peter T.

    1997-01-01

    In the new millennium, software engineering standards are expected to continue to influence the process of producing software-intensive systems which are cost-effetive and of high quality. These sytems may range from ground and flight systems used for planetary exploration to educational support systems used in schools as well as consumer-oriented systems.

  7. V & V Within Reuse-Based Software Engineering

    Science.gov (United States)

    Addy, Edward A.

    1996-01-01

    Verification and validation (V&V) is used to increase the level of assurance of critical software, particularly that of safety-critical and mission critical software. This paper describes the working group's success in identifying V&V tasks that could be performed in the domain engineering and transition levels of reuse-based software engineering. The primary motivation for V&V at the domain level is to provide assurance that the domain requirements are correct and that the domain artifacts correctly implement the domain requirements. A secondary motivation is the possible elimination of redundant V&V activities at the application level. The group also considered the criteria and motivation for performing V&V in domain engineering.

  8. Energy-Aware Software Engineering

    DEFF Research Database (Denmark)

    Eder, Kerstin; Gallagher, John Patrick

    2017-01-01

    A great deal of energy in Information and Communication Technology (ICT) systems can be wasted by software, regardless of how energy-efficient the underlying hardware is. To avoid such waste, programmers need to understand the energy consumption of programs during the development process rather......, the chapter discusses how energy analysis and modelling techniques can be incorporated in software engineering tools, including existing compilers, to assist the energy-aware programmer to optimise the energy consumption of code....

  9. Review of Software Reliability Assessment Methodologies for Digital I and C Software of Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Jae Hyun; Lee, Seung Jun; Jung, Won Dea [KAERI, Daejeon (Korea, Republic of)

    2014-08-15

    Digital instrumentation and control (I and C) systems are increasingly being applied to current nuclear power plants (NPPs) due to its advantages; zero drift, advanced data calculation capacity, and design flexibility. Accordingly, safety issues of software that is main part of the digital I and C system have been raised. As with hardware components, the software failure in NPPs could lead to a large disaster, therefore failure rate test and reliability assessment of software should be properly performed, and after that adopted in NPPs. However, the reliability assessment of the software is quite different with that of hardware, owing to the nature difference between software and hardware. The one of the most different thing is that the software failures arising from design faults as 'error crystal', whereas the hardware failures are caused by deficiencies in design, production, and maintenance. For this reason, software reliability assessment has been focused on the optimal release time considering the economy. However, the safety goal and public acceptance of the NPPs is so distinctive with other industries that the software in NPPs is dependent on reliability quantitative value rather than economy. The safety goal of NPPs compared to other industries is exceptionally high, so conventional methodologies on software reliability assessment already used in other industries could not adjust to safety goal of NPPs. Thus, the new reliability assessment methodology of the software of digital I and C on NPPs need to be developed. In this paper, existing software reliability assessment methodologies are reviewed to obtain the pros and cons of them, and then to assess the usefulness of each method to software of NPPs.

  10. Review of Software Reliability Assessment Methodologies for Digital I and C Software of Nuclear Power Plants

    International Nuclear Information System (INIS)

    Cho, Jae Hyun; Lee, Seung Jun; Jung, Won Dea

    2014-01-01

    Digital instrumentation and control (I and C) systems are increasingly being applied to current nuclear power plants (NPPs) due to its advantages; zero drift, advanced data calculation capacity, and design flexibility. Accordingly, safety issues of software that is main part of the digital I and C system have been raised. As with hardware components, the software failure in NPPs could lead to a large disaster, therefore failure rate test and reliability assessment of software should be properly performed, and after that adopted in NPPs. However, the reliability assessment of the software is quite different with that of hardware, owing to the nature difference between software and hardware. The one of the most different thing is that the software failures arising from design faults as 'error crystal', whereas the hardware failures are caused by deficiencies in design, production, and maintenance. For this reason, software reliability assessment has been focused on the optimal release time considering the economy. However, the safety goal and public acceptance of the NPPs is so distinctive with other industries that the software in NPPs is dependent on reliability quantitative value rather than economy. The safety goal of NPPs compared to other industries is exceptionally high, so conventional methodologies on software reliability assessment already used in other industries could not adjust to safety goal of NPPs. Thus, the new reliability assessment methodology of the software of digital I and C on NPPs need to be developed. In this paper, existing software reliability assessment methodologies are reviewed to obtain the pros and cons of them, and then to assess the usefulness of each method to software of NPPs

  11. The cleanroom case study in the Software Engineering Laboratory: Project description and early analysis

    Science.gov (United States)

    Green, Scott; Kouchakdjian, Ara; Basili, Victor; Weidow, David

    1990-01-01

    This case study analyzes the application of the cleanroom software development methodology to the development of production software at the NASA/Goddard Space Flight Center. The cleanroom methodology emphasizes human discipline in program verification to produce reliable software products that are right the first time. Preliminary analysis of the cleanroom case study shows that the method can be applied successfully in the FDD environment and may increase staff productivity and product quality. Compared to typical Software Engineering Laboratory (SEL) activities, there is evidence of lower failure rates, a more complete and consistent set of inline code documentation, a different distribution of phase effort activity, and a different growth profile in terms of lines of code developed. The major goals of the study were to: (1) assess the process used in the SEL cleanroom model with respect to team structure, team activities, and effort distribution; (2) analyze the products of the SEL cleanroom model and determine the impact on measures of interest, including reliability, productivity, overall life-cycle cost, and software quality; and (3) analyze the residual products in the application of the SEL cleanroom model, such as fault distribution, error characteristics, system growth, and computer usage.

  12. Progress towards the professionalization of Software Engineering

    Directory of Open Access Journals (Sweden)

    Janeth McAlister

    2014-12-01

    Full Text Available Software Engineer provides a theoretical framework, methods, and tools needed to develop quality software, and has impulse the revolution of Information and Knowledge Society, because without their contributions computers would be just a tool without a specific utility. Furthermore, despite of advances in hardware, the impact and potentiation of technological development just was possible thanks to software products. On the other hand, current Society is starting to be recognize as software–dependent, since in this century software is part of all devices required to manipulated information, and which people used in their daily activities. In this article is presented an analysis to the process of search professionalize software engineer and their products, having as base the work develop since the GSwE2009.

  13. Introducing Software Engineering by means of Extreme Programming

    DEFF Research Database (Denmark)

    Hedin, G.; Bendix, Lars Gotfred; Magnusson, B.

    2003-01-01

    This paper reports on experience from teaching basic software engineering concepts by using Extreme Programming in a second year undergraduate course taken by 107 students. We describe how this course fits into a wider programme on software engineering and technology and report our experience from...... running and improving the course. Particularly important aspects of our set-up includes team coaching (by older students) and "team-in-one-room". Our experience so far is very positive and we see that students get a good basic understanding of the important concepts in software engineering, rooted...

  14. Guidelines for using empirical studies in software engineering education

    Directory of Open Access Journals (Sweden)

    Fabian Fagerholm

    2017-09-01

    Full Text Available Software engineering education is under constant pressure to provide students with industry-relevant knowledge and skills. Educators must address issues beyond exercises and theories that can be directly rehearsed in small settings. Industry training has similar requirements of relevance as companies seek to keep their workforce up to date with technological advances. Real-life software development often deals with large, software-intensive systems and is influenced by the complex effects of teamwork and distributed software development, which are hard to demonstrate in an educational environment. A way to experience such effects and to increase the relevance of software engineering education is to apply empirical studies in teaching. In this paper, we show how different types of empirical studies can be used for educational purposes in software engineering. We give examples illustrating how to utilize empirical studies, discuss challenges, and derive an initial guideline that supports teachers to include empirical studies in software engineering courses. Furthermore, we give examples that show how empirical studies contribute to high-quality learning outcomes, to student motivation, and to the awareness of the advantages of applying software engineering principles. Having awareness, experience, and understanding of the actions required, students are more likely to apply such principles under real-life constraints in their working life.

  15. Application of software engineering to development of reactor-safety codes

    International Nuclear Information System (INIS)

    Wilburn, N.P.; Niccoli, L.G.

    1980-11-01

    As a result of the drastically increasing cost of software and the lack of an engineering approach, the technology of Software Engineering is being developed. Software Engineering provides an answer to the increasing cost of developing and maintaining software. It has been applied extensively in the business and aerospace communities and is just now being applied to the development of scientific software and, in particular, to the development of reactor safety codes at HEDL

  16. Prometheus Reactor I&C Software Development Methodology, for Action

    Energy Technology Data Exchange (ETDEWEB)

    T. Hamilton

    2005-07-30

    The purpose of this letter is to submit the Reactor Instrumentation and Control (I&C) software life cycle, development methodology, and programming language selections and rationale for project Prometheus to NR for approval. This letter also provides the draft Reactor I&C Software Development Process Manual and Reactor Module Software Development Plan to NR for information.

  17. Cassini's Test Methodology for Flight Software Verification and Operations

    Science.gov (United States)

    Wang, Eric; Brown, Jay

    2007-01-01

    The Cassini spacecraft was launched on 15 October 1997 on a Titan IV-B launch vehicle. The spacecraft is comprised of various subsystems, including the Attitude and Articulation Control Subsystem (AACS). The AACS Flight Software (FSW) and its development has been an ongoing effort, from the design, development and finally operations. As planned, major modifications to certain FSW functions were designed, tested, verified and uploaded during the cruise phase of the mission. Each flight software upload involved extensive verification testing. A standardized FSW testing methodology was used to verify the integrity of the flight software. This paper summarizes the flight software testing methodology used for verifying FSW from pre-launch through the prime mission, with an emphasis on flight experience testing during the first 2.5 years of the prime mission (July 2004 through January 2007).

  18. Methodology of formal software evaluation

    International Nuclear Information System (INIS)

    Tuszynski, J.

    1998-01-01

    Sydkraft AB, the major Swedish utility, owner of ca 6000 MW el installed in nuclear (NPP Barsebaeck and NPP Oskarshamn), fossil fuel and hydro Power Plants is facing modernization of the control systems of the plants. Standards applicable require structured, formal methods for implementation of the control functions in the modem, real time software systems. This presentation introduces implementation methodology as discussed presently at the Sydkraft organisation. The approach suggested is based upon the process of co-operation of three parties taking part in the implementation; owner of the plant, vendor and Quality Assurance (QA) organisation. QA will be based on tools for formal software validation and on systematic gathering by the owner of validated and proved-by-operation control modules for the concern-wide utilisation. (author)

  19. FMT (Flight Software Memory Tracker) For Cassini Spacecraft-Software Engineering Using JAVA

    Science.gov (United States)

    Kan, Edwin P.; Uffelman, Hal; Wax, Allan H.

    1997-01-01

    The software engineering design of the Flight Software Memory Tracker (FMT) Tool is discussed in this paper. FMT is a ground analysis software set, consisting of utilities and procedures, designed to track the flight software, i.e., images of memory load and updatable parameters of the computers on-board Cassini spacecraft. FMT is implemented in Java.

  20. A report on NASA software engineering and Ada training requirements

    Science.gov (United States)

    Legrand, Sue; Freedman, Glenn B.; Svabek, L.

    1987-01-01

    NASA's software engineering and Ada skill base are assessed and information that may result in new models for software engineering, Ada training plans, and curricula are provided. A quantitative assessment which reflects the requirements for software engineering and Ada training across NASA is provided. A recommended implementation plan including a suggested curriculum with associated duration per course and suggested means of delivery is also provided. The distinction between education and training is made. Although it was directed to focus on NASA's need for the latter, the key relationships to software engineering education are also identified. A rationale and strategy for implementing a life cycle education and training program are detailed in support of improved software engineering practices and the transition to Ada.

  1. The Role of Ethnographic Studies in Empirical Software Engineering

    DEFF Research Database (Denmark)

    Sharp, Helen; Dittrich, Yvonne; Souza, Cleidson R. B. de

    2016-01-01

    Ethnography is a qualitative research method used to study people and cultures. It is largely adopted in disciplines outside software engineering, including different areas of computer science. Ethnography can provide an in-depth understanding of the socio-technological realities surrounding ever...... as a useful and usable approach to empirical software engineering research. Throughout the paper, relevant examples of ethnographic studies of software practice are used to illustrate the points being made.......Ethnography is a qualitative research method used to study people and cultures. It is largely adopted in disciplines outside software engineering, including different areas of computer science. Ethnography can provide an in-depth understanding of the socio-technological realities surrounding...... everyday software development practice, i.e., it can help to uncover not only what practitioners do, but also why they do it. Despite its potential, ethnography has not been widely adopted by empirical software engineering researchers, and receives little attention in the related literature. The main goal...

  2. Software Engineering Research/Developer Collaborations in 2005

    Science.gov (United States)

    Pressburger, Tom

    2006-01-01

    In CY 2005, three collaborations between software engineering technology providers and NASA software development personnel deployed three software engineering technologies on NASA development projects (a different technology on each project). The main purposes were to benefit the projects, infuse the technologies if beneficial into NASA, and give feedback to the technology providers to improve the technologies. Each collaboration project produced a final report. Section 2 of this report summarizes each project, drawing from the final reports and communications with the software developers and technology providers. Section 3 indicates paths to further infusion of the technologies into NASA practice. Section 4 summarizes some technology transfer lessons learned. Also included is an acronym list.

  3. Software engineering and automatic continuous verification of scientific software

    Science.gov (United States)

    Piggott, M. D.; Hill, J.; Farrell, P. E.; Kramer, S. C.; Wilson, C. R.; Ham, D.; Gorman, G. J.; Bond, T.

    2011-12-01

    Software engineering of scientific code is challenging for a number of reasons including pressure to publish and a lack of awareness of the pitfalls of software engineering by scientists. The Applied Modelling and Computation Group at Imperial College is a diverse group of researchers that employ best practice software engineering methods whilst developing open source scientific software. Our main code is Fluidity - a multi-purpose computational fluid dynamics (CFD) code that can be used for a wide range of scientific applications from earth-scale mantle convection, through basin-scale ocean dynamics, to laboratory-scale classic CFD problems, and is coupled to a number of other codes including nuclear radiation and solid modelling. Our software development infrastructure consists of a number of free tools that could be employed by any group that develops scientific code and has been developed over a number of years with many lessons learnt. A single code base is developed by over 30 people for which we use bazaar for revision control, making good use of the strong branching and merging capabilities. Using features of Canonical's Launchpad platform, such as code review, blueprints for designing features and bug reporting gives the group, partners and other Fluidity uers an easy-to-use platform to collaborate and allows the induction of new members of the group into an environment where software development forms a central part of their work. The code repositoriy are coupled to an automated test and verification system which performs over 20,000 tests, including unit tests, short regression tests, code verification and large parallel tests. Included in these tests are build tests on HPC systems, including local and UK National HPC services. The testing of code in this manner leads to a continuous verification process; not a discrete event performed once development has ceased. Much of the code verification is done via the "gold standard" of comparisons to analytical

  4. A designerly methodology for software development

    NARCIS (Netherlands)

    Du Bois, E.

    2013-01-01

    This PhD researches the domain of industrial design engineering starting from the strong technological evolutions and changing economic, social and ecological needs. Our current products are not only build from hardware components, but are a complex mix of hardware, software and services (in

  5. Analysis and design of the SI-simulator software system for the VHTR-SI process by using the object-oriented analysis and object-oriented design methodology

    International Nuclear Information System (INIS)

    Chang, Jiwoon; Shin, Youngjoon; Kim, Jihwan; Lee, Kiyoung; Lee, Wonjae; Chang, Jonghwa; Youn, Cheung

    2008-01-01

    The SI-simulator is an application software system that simulates the dynamic behavior of the VHTR-SI process by the use of mathematical models. Object-oriented analysis (OOA) and object-oriented design (OOD) methodologies were employed for the SI simulator system development. OOA is concerned with developing software engineering requirements and specifications that are expressed as a system's object model (which is composed of a population of interacting objects), as opposed to the traditional data or functional views of systems. OOD techniques are useful for the development of large complex systems. Also, OOA/OOD methodology is usually employed to maximize the reusability and extensibility of a software system. In this paper, we present a design feature for the SI simulator software system by the using methodologies of OOA and OOD

  6. Large-scale visualization projects for teaching software engineering.

    Science.gov (United States)

    Müller, Christoph; Reina, Guido; Burch, Michael; Weiskopf, Daniel

    2012-01-01

    The University of Stuttgart's software engineering major complements the traditional computer science major with more practice-oriented education. Two-semester software projects in various application areas offered by the university's different computer science institutes are a successful building block in the curriculum. With this realistic, complex project setting, students experience the practice of software engineering, including software development processes, technologies, and soft skills. In particular, visualization-based projects are popular with students. Such projects offer them the opportunity to gain profound knowledge that would hardly be possible with only regular lectures and homework assignments.

  7. Incorporating Gaming in Software Engineering Projects: Case of RMU Monopoly

    Directory of Open Access Journals (Sweden)

    Sushil Acharya

    2009-02-01

    Full Text Available A major challenge in engineering education is retaining student interest in the engineering discipline. Active student involvement in engineering projects is one way of retaining student interest. Such involvement can only be realized if project inception comes entirely from the student. This paper presents a software game, RMU Monopoly, developed as a project requirement for a software engineering course and describes the challenges and gains of implementing such a project. The RMU Monopoly was proposed by three junior software engineering students. The game is a multi-platform software program that allows up to eight players and implements the rules of the Monopoly board game. To ensure agility the game was developed using the spiral software development model. The Software Requirements Specification (SRS document was finalized through an iterative procedure. Standard Unified Modeling Language (UML diagrams were used for product design. A Risk Mitigation, Monitoring, and Management Plan (RMMM was developed to ensure proactive risk management. Gantt chart, weekly progress meetings and weekly scrum meetings were used to track project progress. C# and Sub- Version were used in a client-server architecture to develop the software. The project was successful in retaining student interest in the software engineering discipline

  8. Repository-based software engineering program

    Science.gov (United States)

    Wilson, James

    1992-01-01

    The activities performed during September 1992 in support of Tasks 01 and 02 of the Repository-Based Software Engineering Program are outlined. The recommendations and implementation strategy defined at the September 9-10 meeting of the Reuse Acquisition Action Team (RAAT) are attached along with the viewgraphs and reference information presented at the Institute for Defense Analyses brief on legal and patent issues related to software reuse.

  9. Systems engineering agile design methodologies

    CERN Document Server

    Crowder, James A

    2013-01-01

    This book examines the paradigm of the engineering design process. The authors discuss agile systems and engineering design. The book captures the entire design process (functionbases), context, and requirements to affect real reuse. It provides a methodology for an engineering design process foundation for modern and future systems design. This book captures design patterns with context for actual Systems Engineering Design Reuse and contains a new paradigm in Design Knowledge Management.

  10. The classification and evaluation of Computer-Aided Software Engineering tools

    OpenAIRE

    Manley, Gary W.

    1990-01-01

    Approved for public release; distribution unlimited. The use of Computer-Aided Software Engineering (CASE) tools has been viewed as a remedy for the software development crisis by achieving improved productivity and system quality via the automation of all or part of the software engineering process. The proliferation and tremendous variety of tools available have stretched the understanding of experienced practitioners and has had a profound impact on the software engineering process itse...

  11. A Comparison of Various Software Development Methodologies: Feasibility and Methods of Integration

    Directory of Open Access Journals (Sweden)

    Samir Abou El-Seoud

    2016-12-01

    Full Text Available System development methodologies which have being used in the academic and commercial environments during last two decades have advantages and disadvantages. Researchers had tried to identify objectives, scope …etc. of the methodologies by following different approaches. Each approach has its Limitation, specific interest, coverage …etc. In this paper, we tried to perform a comparative study of those methodologies which are popular and commonly used in banking and commercial environment. We tried in our study to determine objectives, scope, tools and other features of the methodologies. We also, tried to determine how and to what extent the methodologies incorporate the facilities such as project management, cost benefit analysis, documentation …etc. One of the most important aspects of our study was how to integrate the methodologies and develop a global methodology which covers the complete span of the software development life cycle? A prototype system which integrates the selected methodologies has been developed. The developed system helps analysts and designers how to choose suitable tools or to obtain guidelines on what to do in a particular situation. The prototype system has been tested during the development of a software for an ATM “Auto Teller Machine” by selecting and applying SASD methodology during software development. This resulted in the development of high quality and well documented software system.

  12. Survey on Projects at DLR Simulation and Software Technology with Focus on Software Engineering and HPC

    OpenAIRE

    Schreiber, Andreas; Basermann, Achim

    2013-01-01

    We introduce the DLR institute “Simulation and Software Technology” (SC) and present current activities regarding software engineering and high performance computing (HPC) in German or international projects. Software engineering at SC focusses on data and knowledge management as well as tools for studies and experiments. We discuss how we apply software configuration management, validation and verification in our projects. Concrete research topics are traceability of (software devel...

  13. A process algebra software engineering environment

    NARCIS (Netherlands)

    Diertens, B.

    2008-01-01

    In previous work we described how the process algebra based language PSF can be used in software engineering, using the ToolBus, a coordination architecture also based on process algebra, as implementation model. In this article we summarize that work and describe the software development process

  14. Software Engineering Technology Infusion Within NASA

    Science.gov (United States)

    Zelkowitz, Marvin V.

    1996-01-01

    Abstract technology transfer is of crucial concern to both government and industry today. In this paper, several software engineering technologies used within NASA are studied, and the mechanisms, schedules, and efforts at transferring these technologies are investigated. The goals of this study are: 1) to understand the difference between technology transfer (the adoption of a new method by large segments of an industry) as an industry-wide phenomenon and the adoption of a new technology by an individual organization (called technology infusion); and 2) to see if software engineering technology transfer differs from other engineering disciplines. While there is great interest today in developing technology transfer models for industry, it is the technology infusion process that actually causes changes in the current state of the practice.

  15. Coupling methodology within the software platform alliances

    Energy Technology Data Exchange (ETDEWEB)

    Montarnal, Ph; Deville, E; Adam, E; Bengaouer, A [CEA Saclay, Dept. de Modelisation des Systemes et Structures 91 - Gif-sur-Yvette (France); Dimier, A; Gaombalet, J; Loth, L [Agence Nationale pour la Gestion des Dechets Radioactifs (ANDRA), 92 - Chatenay Malabry (France); Chavant, C [Electricite de France (EDF), 92 - Clamart (France)

    2005-07-01

    CEA, ANDRA and EDF are jointly developing the software platform ALLIANCES which aim is to produce a tool for the simulation of nuclear waste storage and disposal repository. This type of simulations deals with highly coupled thermo-hydro-mechanical and chemical (T-H-M-C) processes. A key objective of Alliances is to give the capability for coupling algorithms development between existing codes. The aim of this paper is to present coupling methodology use in the context of this software platform. (author)

  16. Coupling methodology within the software platform alliances

    International Nuclear Information System (INIS)

    Montarnal, Ph.; Deville, E.; Adam, E.; Bengaouer, A.; Dimier, A.; Gaombalet, J.; Loth, L.; Chavant, C.

    2005-01-01

    CEA, ANDRA and EDF are jointly developing the software platform ALLIANCES which aim is to produce a tool for the simulation of nuclear waste storage and disposal repository. This type of simulations deals with highly coupled thermo-hydro-mechanical and chemical (T-H-M-C) processes. A key objective of Alliances is to give the capability for coupling algorithms development between existing codes. The aim of this paper is to present coupling methodology use in the context of this software platform. (author)

  17. The study of methodologies of software development for the next generation of HEP detector software

    International Nuclear Information System (INIS)

    Ding Yuzheng; Wang Taijie; Dai Guiliang

    1997-01-01

    The author discusses the characteristics of the next generation of HEP (High Energy Physics) detector software, and describes the basic strategy for the usage of object oriented methodologies, languages and tools in the development of the next generation of HEP detector software

  18. Guide to advanced empirical software engineering

    National Research Council Canada - National Science Library

    Shull, Forrest; Singer, Janice; Sjøberg, Dag I. K

    2008-01-01

    ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Section I Research Methods and Techniques Chapter 1 Software Engineering Data Collection for Field Studies...

  19. Proceedings of the Thirteenth Annual Software Engineering Workshop

    Science.gov (United States)

    1988-01-01

    Topics covered in the workshop included studies and experiments conducted in the Software Engineering Laboratory (SEL), a cooperative effort of NASA Goddard Space Flight Center, the University of Maryland, and Computer Sciences Corporation; software models; software products; and software tools.

  20. Benefits of reverse engineering technologies in software development makerspace

    Directory of Open Access Journals (Sweden)

    Aabidi M.H.

    2017-01-01

    Full Text Available In the recent decades, the amount of data produced by scientific, engineering, and life science applications has increased with several orders of magnitude. In parallel with this development, the applications themselves have become increasingly complex in terms of functionality, structure, and behavior. In the same time, development and production cycles of such applications exhibit a tendency of becoming increasingly shorter, due to factors such as market pressure and rapid evolution of supporting and enabling technologies. As a consequence, an increasing fraction of the cost of creating new applications and manufacturing processes shifts from the creation of new artifacts to the adaption of existing ones. A key component of this activity is the understanding of the design, operation, and behavior of existing manufactured artifacts, such as software code bases, hardware systems, and mechanical assemblies. For instance, in the software industry, it is estimated that maintenance costs exceed 80% of the total costs of a software product's lifecycle, and software understanding accounts for as much as half of these maintenance costs. To facilitate the software development process, it would be ideal to have tools that automatically generate or help to generate UML (Unified Modeling Language models from source code. Reverse engineering the software architecture from source code provides a valuable service to software practitioners. Case tools implementing MDA and reverse-engineering constitute an important opportunity of software development engineers. So MDA and reverse engineering is an important key witch make makerspace more productive and more efficient.

  1. Socio-Cultural Challenges in Global Software Engineering Education

    Science.gov (United States)

    Hoda, Rashina; Babar, Muhammad Ali; Shastri, Yogeshwar; Yaqoob, Humaa

    2017-01-01

    Global software engineering education (GSEE) is aimed at providing software engineering (SE) students with knowledge, skills, and understanding of working in globally distributed arrangements so they can be prepared for the global SE (GSE) paradigm. It is important to understand the challenges involved in GSEE for improving the quality and…

  2. Case Study Research in Software Engineering Guidelines and Examples

    CERN Document Server

    Runeson, Per; Rainer, Austen; Regnell, Bjorn

    2012-01-01

    Based on their own experiences of in-depth case studies of software projects in international corporations, in this book the authors present detailed practical guidelines on the preparation, conduct, design and reporting of case studies of software engineering.  This is the first software engineering specific book on the case study research method.

  3. Ten recommendations for software engineering in research.

    Science.gov (United States)

    Hastings, Janna; Haug, Kenneth; Steinbeck, Christoph

    2014-01-01

    Research in the context of data-driven science requires a backbone of well-written software, but scientific researchers are typically not trained at length in software engineering, the principles for creating better software products. To address this gap, in particular for young researchers new to programming, we give ten recommendations to ensure the usability, sustainability and practicality of research software.

  4. Software-Engineering Process Simulation (SEPS) model

    Science.gov (United States)

    Lin, C. Y.; Abdel-Hamid, T.; Sherif, J. S.

    1992-01-01

    The Software Engineering Process Simulation (SEPS) model is described which was developed at JPL. SEPS is a dynamic simulation model of the software project development process. It uses the feedback principles of system dynamics to simulate the dynamic interactions among various software life cycle development activities and management decision making processes. The model is designed to be a planning tool to examine tradeoffs of cost, schedule, and functionality, and to test the implications of different managerial policies on a project's outcome. Furthermore, SEPS will enable software managers to gain a better understanding of the dynamics of software project development and perform postmodern assessments.

  5. The software development process in worldwide collaborations

    International Nuclear Information System (INIS)

    Amako, K.

    1998-01-01

    High energy physics experiments in future colliders are inevitably large scale international collaborations. In these experiments, software development has to be done by a large number of physicists, software engineers and computer scientists, dispersed all over the world. The major subject of this paper is to discuss on various aspects of software development in the worldwide environment. These include software engineering and methodology, software development process and management. (orig.)

  6. Proceedings of the Twenty-Fourth Annual Software Engineering Workshop

    Science.gov (United States)

    2000-01-01

    On December 1 and 2, the Software Engineering Laboratory (SEL), a consortium composed of NASA/Goddard, the University of Maryland, and CSC, held the 24th Software Engineering Workshop (SEW), the last of the millennium. Approximately 240 people attended the 2-day workshop. Day 1 was composed of four sessions: International Influence of the Software Engineering Laboratory; Object Oriented Testing and Reading; Software Process Improvement; and Space Software. For the first session, three internationally known software process experts discussed the influence of the SEL with respect to software engineering research. In the Space Software session, prominent representatives from three different NASA sites- GSFC's Marti Szczur, the Jet Propulsion Laboratory's Rick Doyle, and the Ames Research Center IV&V Facility's Lou Blazy- discussed the future of space software in their respective centers. At the end of the first day, the SEW sponsored a reception at the GSFC Visitors' Center. Day 2 also provided four sessions: Using the Experience Factory; A panel discussion entitled "Software Past, Present, and Future: Views from Government, Industry, and Academia"; Inspections; and COTS. The day started with an excellent talk by CSC's Frank McGarry on "Attaining Level 5 in CMM Process Maturity." Session 2, the panel discussion on software, featured NASA Chief Information Officer Lee Holcomb (Government), our own Jerry Page (Industry), and Mike Evangelist of the National Science Foundation (Academia). Each presented his perspective on the most important developments in software in the past 10 years, in the present, and in the future.

  7. Proceedings of the Eighteenth Annual Software Engineering Workshop

    Science.gov (United States)

    1993-01-01

    The workshop provided a forum for software practitioners from around the world to exchange information on the measurement, use, and evaluation of software methods, models, and tools. This year, approximately 450 people attended the workshop, which consisted of six sessions on the following topics: the Software Engineering Laboratory, measurement, technology assessment, advanced concepts, process, and software engineering issues in NASA. Three presentations were given in each of the topic areas. The content of those presentations and the research papers detailing the work reported are included in these proceedings. The workshop concluded with a tutorial session on how to start an Experience Factory.

  8. Implementing Large Projects in Software Engineering Courses

    Science.gov (United States)

    Coppit, David

    2006-01-01

    In software engineering education, large projects are widely recognized as a useful way of exposing students to the real-world difficulties of team software development. But large projects are difficult to put into practice. First, educators rarely have additional time to manage software projects. Second, classrooms have inherent limitations that…

  9. Software Engineering Principles for Courseware Development.

    Science.gov (United States)

    Magel, Kenneth

    1980-01-01

    Courseware (computer based curriculum materials) development should follow the lessons learned by software engineers. The most important of 28 principles of software development presented here include a stress on human readability, the importance of early planning and analysis, the need for independent evaluation, and the need to be flexible.…

  10. Simple statistical methods for software engineering data and patterns

    CERN Document Server

    Pandian, C Ravindranath

    2015-01-01

    Although there are countless books on statistics, few are dedicated to the application of statistical methods to software engineering. Simple Statistical Methods for Software Engineering: Data and Patterns fills that void. Instead of delving into overly complex statistics, the book details simpler solutions that are just as effective and connect with the intuition of problem solvers.Sharing valuable insights into software engineering problems and solutions, the book not only explains the required statistical methods, but also provides many examples, review questions, and case studies that prov

  11. Data collection procedures for the Software Engineering Laboratory (SEL) database

    Science.gov (United States)

    Heller, Gerard; Valett, Jon; Wild, Mary

    1992-01-01

    This document is a guidebook to collecting software engineering data on software development and maintenance efforts, as practiced in the Software Engineering Laboratory (SEL). It supersedes the document entitled Data Collection Procedures for the Rehosted SEL Database, number SEL-87-008 in the SEL series, which was published in October 1987. It presents procedures to be followed on software development and maintenance projects in the Flight Dynamics Division (FDD) of Goddard Space Flight Center (GSFC) for collecting data in support of SEL software engineering research activities. These procedures include detailed instructions for the completion and submission of SEL data collection forms.

  12. Automated remedial assessment methodology software system

    International Nuclear Information System (INIS)

    Whiting, M.; Wilkins, M.; Stiles, D.

    1994-11-01

    The Automated Remedial Analysis Methodology (ARAM) software system has been developed by the Pacific Northwest Laboratory to assist the U.S. Department of Energy (DOE) in evaluating cleanup options for over 10,000 contaminated sites across the DOE complex. The automated methodology comprises modules for decision logic diagrams, technology applicability and effectiveness rules, mass balance equations, cost and labor estimating factors and equations, and contaminant stream routing. ARAM is used to select technologies for meeting cleanup targets; determine the effectiveness of the technologies in destroying, removing, or immobilizing contaminants; decide the nature and amount of secondary waste requiring further treatment; and estimate the cost and labor involved when applying technologies

  13. Software packages for food engineering needs

    OpenAIRE

    Abakarov, Alik

    2011-01-01

    The graphic user interface (GUI) software packages “ANNEKs” and “OPT-PROx” are developed to meet food engineering needs. “OPT-RROx” (OPTimal PROfile) is software developed to carry out thermal food processing optimization based on the variable retort temperature processing and global optimization technique. “ANNEKs” (Artificial Neural Network Enzyme Kinetics) is software designed for determining the kinetics of enzyme hydrolysis of protein at different initial reaction parameters based on the...

  14. EPRI engineering workstation software - Discussion and demonstration

    International Nuclear Information System (INIS)

    Stewart, R.P.; Peterson, C.E.; Agee, L.J.

    1992-01-01

    Computing technology is undergoing significant changes with respect to engineering applications in the electric utility industry. These changes result mainly from the introduction of several UNIX workstations that provide mainframe calculational capability at much lower costs. The workstations are being coupled with microcomputers through local area networks to provide engineering groups with a powerful and versatile analysis capability. PEGASYS, the Professional Engineering Graphic Analysis System, is a software package for use with engineering analysis codes executing in a workstation environment. PEGASYS has a menu driven, user-friendly interface to provide pre-execution support for preparing unput and graphical packages for post-execution analysis and on-line monitoring capability for engineering codes. The initial application of this software is for use with RETRAN-02 operating on an IBM RS/6000 workstation using X-Windows/UNIX and a personal computer under DOS

  15. Software process improvement in the NASA software engineering laboratory

    Science.gov (United States)

    Mcgarry, Frank; Pajerski, Rose; Page, Gerald; Waligora, Sharon; Basili, Victor; Zelkowitz, Marvin

    1994-01-01

    The Software Engineering Laboratory (SEL) was established in 1976 for the purpose of studying and measuring software processes with the intent of identifying improvements that could be applied to the production of ground support software within the Flight Dynamics Division (FDD) at the National Aeronautics and Space Administration (NASA)/Goddard Space Flight Center (GSFC). The SEL has three member organizations: NASA/GSFC, the University of Maryland, and Computer Sciences Corporation (CSC). The concept of process improvement within the SEL focuses on the continual understanding of both process and product as well as goal-driven experimentation and analysis of process change within a production environment.

  16. IEEE Computer Society/Software Engineering Institute Software Process Achievement (SPA) Award 2009

    Science.gov (United States)

    2011-03-01

    capabilities to our GDM. We also introduced software as a service ( SaaS ) as part our technology solutions and have further enhanced our ability to...model PROSPER Infosys production support methodology Q&P quality and productivity R&D research and development SaaS software as a service ... Software Development Life Cycle (SDLC) 23 Table 10: Scientific Estimation Coverage by Service Line 27 CMU/SEI-2011-TR-008 | vi CMU/SEI-2011

  17. Software engineering for the EBR-II data acquisition system conversion

    International Nuclear Information System (INIS)

    Schorzman, W.

    1988-01-01

    The purpose of this paper is to outline how EBR-II engineering approached the data acquisition system (DAS) software conversion project with the restraints of operational transparency and six weeks for final implementation and testing. Software engineering is a relatively new discipline that provides a structured philosopy for software conversion. The software life cycle is structured into six basic steps: 1) initiation, 2) requirements definition, 3) design, 4) programming, 5) testing, and 6) operations. These steps are loosely defined and can be altered to fit specific software applications. DAS software is encompassed from three sources: 1) custom software, 2) system software, and 3) in-house application software. A data flow structure is used to describe the DAS software. The categories are: 1) software used to bring signals into the central processer, 2) software that transforms the analog data to engineering units and then logs the data in the data store, and 3) software used to transport and display the data. The focus of this paper is to describe how the conversion team used a structured engineering approach and utilized the resources available to produce a quality system on time. Although successful, the conversion process provided some pit falls and stumbling blocks. Working through these obstacles enhanced our understanding and surfaced in the form of LESSONS LEARNED, which are gracefully shared in this paper

  18. The Dark Side of Software Engineering Evil on Computing Projects

    CERN Document Server

    Rost, Johann

    2010-01-01

    Betrayal! Corruption! Software engineering? Industry experts Johann Rost and Robert L. Glass explore the seamy underbelly of software engineering in this timely report on and analysis of the prevalance of subversion, lying, hacking, and espionage on every level of software project management. Based on the authors' original research and augmented by frank discussion and insights from other well-respected figures, The Dark Side of Software Engineering goes where other management studies fear to tread -- a corporate environment where schedules are fabricated, trust is betrayed, millions of dollar

  19. What information do software engineering practitioners need?

    OpenAIRE

    Punter, T.

    2003-01-01

    This position paper addresses an important question for the discipline of Empirical or Evidence-based Software Engineering (SE), namely ´what information do software engineering practitioners need from the empirical studies´. The paper contributes to answering this question by presenting survey results on two sub-questions: 1) what are the topics that interest practitioners? and 2) what type of information is needed by practitioners? Answering the first question results in a set of SE topics,...

  20. The ATLAS Data Management Software Engineering Process

    CERN Document Server

    Lassnig, M; The ATLAS collaboration; Stewart, G A; Barisits, M; Beermann, T; Vigne, R; Serfon, C; Goossens, L; Nairz, A; Molfetas, A

    2014-01-01

    Rucio is the next-generation data management system of the ATLAS experiment. The software engineering process to develop Rucio is fundamentally different to existing software development approaches in the ATLAS distributed computing community. Based on a conceptual design document, development takes place using peer-reviewed code in a test-driven environment. The main objectives are to ensure that every engineer understands the details of the full project, even components usually not touched by them, that the design and architecture are coherent, that temporary contributors can be productive without delay, that programming mistakes are prevented before being committed to the source code, and that the source is always in a fully functioning state. This contribution will illustrate the workflows and products used, and demonstrate the typical development cycle of a component from inception to deployment within this software engineering process. Next to the technological advantages, this contribution will also hi...

  1. The ATLAS Data Management Software Engineering Process

    CERN Document Server

    Lassnig, M; The ATLAS collaboration; Stewart, G A; Barisits, M; Beermann, T; Vigne, R; Serfon, C; Goossens, L; Nairz, A

    2013-01-01

    Rucio is the next-generation data management system of the ATLAS experiment. The software engineering process to develop Rucio is fundamentally different to existing software development approaches in the ATLAS distributed computing community. Based on a conceptual design document, development takes place using peer-reviewed code in a test-driven environment. The main objectives are to ensure that every engineer understands the details of the full project, even components usually not touched by them, that the design and architecture are coherent, that temporary contributors can be productive without delay, that programming mistakes are prevented before being committed to the source code, and that the source is always in a fully functioning state. This contribution will illustrate the workflows and products used, and demonstrate the typical development cycle of a component from inception to deployment within this software engineering process. Next to the technological advantages, this contribution will also hi...

  2. Diversification and Challenges of Software Engineering Standards

    Science.gov (United States)

    Poon, Peter T.

    1994-01-01

    The author poses certain questions in this paper: 'In the future, should there be just one software engineering standards set? If so, how can we work towards that goal? What are the challenges of internationalizing standards?' Based on the author's personal view, the statement of his position is as follows: 'There should NOT be just one set of software engineering standards in the future. At the same time, there should NOT be the proliferation of standards, and the number of sets of standards should be kept to a minimum.It is important to understand the diversification of the areas which are spanned by the software engineering standards.' The author goes on to describe the diversification of processes, the diversification in the national and international character of standards organizations, the diversification of the professional organizations producing standards, the diversification of the types of businesses and industries, and the challenges of internationalizing standards.

  3. A company perspective on software engineering standards

    International Nuclear Information System (INIS)

    Steer, R.W.

    1988-01-01

    Software engineering standards, as implemented via formal policies and procedures, have historically been used in the nuclear industry, especially for codes used in the design, analysis, or operation of the plant. Over the past two decades, a significant amount of software has been put in place to perform these functions, while the overall software life cycle has become better understood, more and different computer systems have become available, and industry has become increasingly aware of the advantages gained when these procedures are used in the development and maintenance of this large amount of software. The use of standards and attendant procedures is thus becoming increasingly important as more computerization is taking place, both in the design and the operation of the plant. It is difficult to categorize software used in activities related to nuclear plants in a simple manner. That difficulty is due to the diversity of those uses, with attendant diversity in the methods and procedures used in the production of the software, compounded by a changing business climate in which significant software engineering expertise is being applied to a broader range of applications on a variety of computing systems. The use of standards in the various phases of the production of software thus becomes more difficult as well. This paper discusses the various types of software and the importance of software standards in the development of each of them

  4. Introduction to the workshop on technology transfer in software engineering

    NARCIS (Netherlands)

    Harrison, Warren; Wieringa, Roelf J.

    The goal of the Workshop on Technology Transfer in Software Engineering is to increase our understanding of technology transfer in software engineering, and to learn from successful case studies. We wanted to bring researchers and practitioners together to create an inventory of problems in software

  5. Domain Engineering, A Software Engineering Discipline in Need of Research

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2000-01-01

    . The aim of this paper is to advocate: that researchers study these development method components, and that universities focus their education on basing well-nigh any course on the use of formal techniques: Specification and verification, and that software engineers take heed: Start applying formal......, and these again seem more stable than software designs. Thus, almost like the universal laws of physics, it pays off to first develop theories of domains. But domain engineering, as in fact also requirements engineering, really is in need of thoroughly researched development principles, techniques and tools...... techniques. A brief example of describing stake-holder perspectives will be given - on the background of which we then proceed to survey the notions of domain intrinsics, domain support technologies, domain management & organisation, domain rules & regulations, domain human behaviour, etc. We show elsewhere...

  6. Prometheus Reactor I and C Software Development Methodology, for Action

    International Nuclear Information System (INIS)

    T. Hamilton

    2005-01-01

    The purpose of this letter is to submit the Reactor Instrumentation and Control (I and C) software life cycle, development methodology, and programming language selections and rationale for project Prometheus to NR for approval. This letter also provides the draft Reactor I and C Software Development Process Manual and Reactor Module Software Development Plan to NR for information

  7. Classifying web genres in context: a case study documenting the web genres used by a software engineer

    NARCIS (Netherlands)

    Montesi, M.; Navarrete, T.

    2008-01-01

    This case study analyzes the Internet-based resources that a software engineer uses in his daily work. Methodologically, we studied the web browser history of the participant, classifying all the web pages he had seen over a period of 12 days into web genres. We interviewed him before and after the

  8. IEEE [Institute of Electrical and Electronics Engineers] standards and nuclear software quality engineering

    International Nuclear Information System (INIS)

    Daughtrey, T.

    1988-01-01

    Significant new nuclear-specific software standards have recently been adopted under the sponsorship of the American Nuclear Society and the American Society of Mechanical Engineers. The interest of the US Nuclear Regulatory Commission has also been expressed through their issuance of NUREG/CR-4640. These efforts all indicate a growing awareness of the need for thorough, referenceable expressions of the way to build in and evaluate quality in nuclear software. A broader professional perspective can be seen in the growing number of software engineering standards sponsored by the Institute of Electrical and Electronics Engineers (IEEE) Computer Society. This family of standards represents a systematic effort to capture professional consensus on quality practices throughout the software development life cycle. The only omission-the implementation phase-is treated by accepted American National Standards Institute or de facto standards for programming languages

  9. Professional Issues In Software Engineering

    CERN Document Server

    Bott, Frank; Eaton, Jack; Rowland, Diane

    2000-01-01

    An comprehensive text covering all the issues that software engineers now have to take into account apart from the technical side of things. Includes information on the legal, professional and commercial context in which they work.

  10. METHODICS, SOFTWARE AND LABORATORY EQUIPMENT FOR AN INNOVATIVE ELECTRICAL ENGINEERING DISCIPLINE

    Directory of Open Access Journals (Sweden)

    V.S. Petrushin

    2016-09-01

    Full Text Available Purpose. Development of innovative electrical engineering discipline «Electric Machines in Mechatronic Systems» in order to improve the training of specialists of electrical engineering specialty. Methodology. The proposed project concerns the educational reforms that promote the intensification of the educational process. Results. The structure of interactive educational and training complex, which is a computer learning tool in the form of software and methodical support, as well as data and knowledge bases and consists of functionally related multimedia learning systems, interactive learning, automated control of the learning process. Originality. To offer online training and research facilities, guidelines for laboratory and computational and graphic works. Practical value. Increase the knowledge of students of educational material related to the discipline of innovation «Electric Machines in Mechatronic Systems».

  11. Collected software engineering papers, volume 11

    Science.gov (United States)

    1993-01-01

    This document is a collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) from November 1992 through November 1993. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. This is the 11th such volume of technical papers produced by the SEL. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. Additional information about the SEL and its research efforts may be obtained from the sources listed in the bibliography at the end of this document.

  12. Collected software engineering papers, volume 12

    Science.gov (United States)

    1994-01-01

    This document is a collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) from November 1993 through October 1994. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. This is the 12th such volume of technical papers produced by the SEL. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. Additional information about the SEL and its research efforts may be obtained from the sources listed in the bibliography at the end of this document.

  13. Application of a methodology for the development and validation of reliable process control software

    International Nuclear Information System (INIS)

    Ramamoorthy, C.V.; Mok, Y.R.; Bastani, F.B.; Chin, G.

    1980-01-01

    The necessity of a good methodology for the development of reliable software, especially with respect to the final software validation and testing activities, is discussed. A formal specification development and validation methodology is proposed. This methodology has been applied to the development and validation of a pilot software, incorporating typical features of critical software for nuclear power plants safety protection. The main features of the approach include the use of a formal specification language and the independent development of two sets of specifications. 1 ref

  14. An Ontology for Software Engineering Education

    Science.gov (United States)

    Ling, Thong Chee; Jusoh, Yusmadi Yah; Adbullah, Rusli; Alwi, Nor Hayati

    2013-01-01

    Software agents communicate using ontology. It is important to build an ontology for specific domain such as Software Engineering Education. Building an ontology from scratch is not only hard, but also incur much time and cost. This study aims to propose an ontology through adaptation of the existing ontology which is originally built based on a…

  15. An Agile Constructionist Mentoring Methodology for Software Projects in the High School

    Science.gov (United States)

    Meerbaum-Salant, Orni; Hazzan, Orit

    2010-01-01

    This article describes the construction process and evaluation of the Agile Constructionist Mentoring Methodology (ACMM), a mentoring method for guiding software development projects in the high school. The need for such a methodology has arisen due to the complexity of mentoring software project development in the high school. We introduce the…

  16. Evolution of courseware development methodology : recent issues

    NARCIS (Netherlands)

    Moonen, J.C.M.M.; Schoenmaker, Jan

    1992-01-01

    To improve the quality of courseware products and the efficiency of the courseware development process, a methodology based upon "courseware engineering", being a combination of instructional systems development and software engineering, has emerged over the last 10¿15 years. Recently, software

  17. An Intuitionistic Fuzzy Methodology for Component-Based Software Reliability Optimization

    DEFF Research Database (Denmark)

    Madsen, Henrik; Grigore, Albeanu; Popenţiuvlǎdicescu, Florin

    2012-01-01

    Component-based software development is the current methodology facilitating agility in project management, software reuse in design and implementation, promoting quality and productivity, and increasing the reliability and performability. This paper illustrates the usage of intuitionistic fuzzy...... degree approach in modelling the quality of entities in imprecise software reliability computing in order to optimize management results. Intuitionistic fuzzy optimization algorithms are proposed to be used for complex software systems reliability optimization under various constraints....

  18. The ATLAS data management software engineering process

    International Nuclear Information System (INIS)

    Lassnig, M; Garonne, V; Stewart, G A; Barisits, M; Serfon, C; Goossens, L; Nairz, A; Beermann, T; Vigne, R; Molfetas, A

    2014-01-01

    Rucio is the next-generation data management system of the ATLAS experiment. The software engineering process to develop Rucio is fundamentally different to existing software development approaches in the ATLAS distributed computing community. Based on a conceptual design document, development takes place using peer-reviewed code in a test-driven environment. The main objectives are to ensure that every engineer understands the details of the full project, even components usually not touched by them, that the design and architecture are coherent, that temporary contributors can be productive without delay, that programming mistakes are prevented before being committed to the source code, and that the source is always in a fully functioning state. This contribution will illustrate the workflows and products used, and demonstrate the typical development cycle of a component from inception to deployment within this software engineering process. Next to the technological advantages, this contribution will also highlight the social aspects of an environment where every action is subject to detailed scrutiny.

  19. The ATLAS data management software engineering process

    Science.gov (United States)

    Lassnig, M.; Garonne, V.; Stewart, G. A.; Barisits, M.; Beermann, T.; Vigne, R.; Serfon, C.; Goossens, L.; Nairz, A.; Molfetas, A.; Atlas Collaboration

    2014-06-01

    Rucio is the next-generation data management system of the ATLAS experiment. The software engineering process to develop Rucio is fundamentally different to existing software development approaches in the ATLAS distributed computing community. Based on a conceptual design document, development takes place using peer-reviewed code in a test-driven environment. The main objectives are to ensure that every engineer understands the details of the full project, even components usually not touched by them, that the design and architecture are coherent, that temporary contributors can be productive without delay, that programming mistakes are prevented before being committed to the source code, and that the source is always in a fully functioning state. This contribution will illustrate the workflows and products used, and demonstrate the typical development cycle of a component from inception to deployment within this software engineering process. Next to the technological advantages, this contribution will also highlight the social aspects of an environment where every action is subject to detailed scrutiny.

  20. ETICS: the international software engineering service for the grid

    Energy Technology Data Exchange (ETDEWEB)

    Meglio, A D; Begin, M-E [CERN (Switzerland); Couvares, P [University of Wisconsin-Madison (United States); Ronchieri, E [INFN CNAF (Italy); Takacs, E [4D SOFT Ltd (Hungary)], E-mail: alberto.di.meglio@cern.ch

    2008-07-15

    The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects are using the software engineering services to build, validate and distribute their software. Finally a number of significant use and test cases will be described to show how ETICS can be used in particular to perform interoperability tests of grid middleware using the grid itself.

  1. ETICS: the international software engineering service for the grid

    Science.gov (United States)

    Meglio, A. D.; Bégin, M.-E.; Couvares, P.; Ronchieri, E.; Takacs, E.

    2008-07-01

    The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects are using the software engineering services to build, validate and distribute their software. Finally a number of significant use and test cases will be described to show how ETICS can be used in particular to perform interoperability tests of grid middleware using the grid itself.

  2. ETICS: the international software engineering service for the grid

    International Nuclear Information System (INIS)

    Meglio, A D; Begin, M-E; Couvares, P; Ronchieri, E; Takacs, E

    2008-01-01

    The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects are using the software engineering services to build, validate and distribute their software. Finally a number of significant use and test cases will be described to show how ETICS can be used in particular to perform interoperability tests of grid middleware using the grid itself

  3. Towards a controlled vocabulary on software engineering education

    Science.gov (United States)

    Pizard, Sebastián; Vallespir, Diego

    2017-11-01

    Software engineering is the discipline that develops all the aspects of the production of software. Although there are guidelines about what topics to include in a software engineering curricula, it is usually unclear which are the best methods to teach them. In any science discipline the construction of a classification schema is a common approach to understand a thematic area. This study examines previous publications in software engineering education to obtain a first controlled vocabulary (a more formal definition of a classification schema) in the field. Publications from 1988 to 2014 were collected and processed using automatic clustering techniques and the outcomes were analysed manually. The result is an initial controlled vocabulary with a taxonomy form with 43 concepts that were identified as the most used in the research publications. We present the classification of the concepts in three facets: 'what to teach', 'how to teach' and 'where to teach' and the evolution of concepts over time.

  4. How does Software Process Improvement Address Global Software Engineering?

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Diebold, Philipp; Münch, Jürgen

    2016-01-01

    a systematic mapping study on the state-of-the-art in SPI from a general perspective, we observed Global Software Engineering (GSE) becoming a topic of interest in recent years. Therefore, in this paper, we provide a detailed investigation of those papers from the overall systematic mapping study that were......For decades, Software Process Improvement (SPI) programs have been implemented, inter alia, to improve quality and speed of software development. To set up, guide, and carry out SPI projects, and to measure SPI state, impact, and success, a multitude of different SPI approaches and considerable...... experience are available. SPI addresses many aspects ranging from individual developer skills to entire organizations. It comprises for instance the optimization of specific activities in the software lifecycle as well as the creation of organization awareness and project culture. In the course of conducting...

  5. Awakening awareness on energy consumption in software engineering

    NARCIS (Netherlands)

    Jagroep, Erik; Broekman, Jordy; Van Der Werf, Jan Martijn E.M.; Brinkkemper, Sjaak; Lago, Patricia; Blom, Leen; Van Vliet, Rob

    2017-01-01

    Software producing organizations have the ability to address the energy impact of their ICT solutions during the development process. However, while industry is convinced of the energy impact of hardware, the role of software has mostly been acknowledged by researchers in software engineering.

  6. Situational method engineering

    CERN Document Server

    Henderson-Sellers, Brian; Ågerfalk, Pär J; Rossi, Matti

    2014-01-01

    While previously available methodologies for software ? like those published in the early days of object technology ? claimed to be appropriate for every conceivable project, situational method engineering (SME) acknowledges that most projects typically have individual characteristics and situations. Thus, finding the most effective methodology for a particular project needs specific tailoring to that situation. Such a tailored software development methodology needs to take into account all the bits and pieces needed for an organization to develop software, including the software process, the

  7. Automatic program generation: future of software engineering

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, J.H.

    1979-01-01

    At this moment software development is still more of an art than an engineering discipline. Each piece of software is lovingly engineered, nurtured, and presented to the world as a tribute to the writer's skill. When will this change. When will the craftsmanship be removed and the programs be turned out like so many automobiles from an assembly line. Sooner or later it will happen: economic necessities will demand it. With the advent of cheap microcomputers and ever more powerful supercomputers doubling capacity, much more software must be produced. The choices are to double the number of programers, double the efficiency of each programer, or find a way to produce the needed software automatically. Producing software automatically is the only logical choice. How will automatic programing come about. Some of the preliminary actions which need to be done and are being done are to encourage programer plagiarism of existing software through public library mechanisms, produce well understood packages such as compiler automatically, develop languages capable of producing software as output, and learn enough about the whole process of programing to be able to automate it. Clearly, the emphasis must not be on efficiency or size, since ever larger and faster hardware is coming.

  8. Software Engineering and eLearning: The MuSofT Project - www.musoft.org

    Directory of Open Access Journals (Sweden)

    Ernst-Erich Doberkat

    2005-12-01

    Full Text Available eLearning supports the education in certain disciplines. Here, we report about novel eLearning concepts, techniques, and tools to support education in Software Engineering, a subdiscipline of computer science. We call this "Software Engineering eLearning". On the other side, software support is a substantial prerequisite for eLearning in any discipline. Thus, Software Engineering techniques have to be applied to develop and maintain those software systems. We call this "eLearning Software Engineering". Both aspects have been investigated in a large joint, BMBF-funded research project, termed MuSofT (Multimedia in Software Engineering. The main results are summarized in this paper.

  9. Imprinting Community College Computer Science Education with Software Engineering Principles

    Science.gov (United States)

    Hundley, Jacqueline Holliday

    Although the two-year curriculum guide includes coverage of all eight software engineering core topics, the computer science courses taught in Alabama community colleges limit student exposure to the programming, or coding, phase of the software development lifecycle and offer little experience in requirements analysis, design, testing, and maintenance. We proposed that some software engineering principles can be incorporated into the introductory-level of the computer science curriculum. Our vision is to give community college students a broader exposure to the software development lifecycle. For those students who plan to transfer to a baccalaureate program subsequent to their community college education, our vision is to prepare them sufficiently to move seamlessly into mainstream computer science and software engineering degrees. For those students who plan to move from the community college to a programming career, our vision is to equip them with the foundational knowledge and skills required by the software industry. To accomplish our goals, we developed curriculum modules for teaching seven of the software engineering knowledge areas within current computer science introductory-level courses. Each module was designed to be self-supported with suggested learning objectives, teaching outline, software tool support, teaching activities, and other material to assist the instructor in using it.

  10. Experiences with Integrating Simulation into a Software Engineering Curriculum

    Science.gov (United States)

    Bollin, Andreas; Hochmuller, Elke; Mittermeir, Roland; Samuelis, Ladislav

    2012-01-01

    Software Engineering education must account for a broad spectrum of knowledge and skills software engineers will be required to apply throughout their professional life. Covering all the topics in depth within a university setting is infeasible due to curricular constraints as well as due to the inherent differences between educational…

  11. 7 Processes that Enable NASA Software Engineering Technologies: Value-Added Process Engineering

    Science.gov (United States)

    Housch, Helen; Godfrey, Sally

    2011-01-01

    The presentation reviews Agency process requirements and the purpose, benefits, and experiences or seven software engineering processes. The processes include: product integration, configuration management, verification, software assurance, measurement and analysis, requirements management, and planning and monitoring.

  12. Software Startups - A Research Agenda

    Directory of Open Access Journals (Sweden)

    Michael Unterkalmsteiner

    2016-10-01

    Full Text Available Software startup companies develop innovative, software-intensive products within limited time frames and with few resources, searching for sustainable and scalable business models. Software startups are quite distinct from traditional mature software companies, but also from micro-, small-, and medium-sized enterprises, introducing new challenges relevant for software engineering research. This paper's research agenda focuses on software engineering in startups, identifying, in particular, 70+ research questions in the areas of supporting startup engineering activities, startup evolution models and patterns, ecosystems and innovation hubs, human aspects in software startups, applying startup concepts in non-startup environments, and methodologies and theories for startup research. We connect and motivate this research agenda with past studies in software startup research, while pointing out possible future directions. While all authors of this research agenda have their main background in Software Engineering or Computer Science, their interest in software startups broadens the perspective to the challenges, but also to the opportunities that emerge from multi-disciplinary research. Our audience is therefore primarily software engineering researchers, even though we aim at stimulating collaborations and research that crosses disciplinary boundaries. We believe that with this research agenda we cover a wide spectrum of the software startup industry current needs.

  13. Repository-Based Software Engineering Program: Working Program Management Plan

    Science.gov (United States)

    1993-01-01

    Repository-Based Software Engineering Program (RBSE) is a National Aeronautics and Space Administration (NASA) sponsored program dedicated to introducing and supporting common, effective approaches to software engineering practices. The process of conceiving, designing, building, and maintaining software systems by using existing software assets that are stored in a specialized operational reuse library or repository, accessible to system designers, is the foundation of the program. In addition to operating a software repository, RBSE promotes (1) software engineering technology transfer, (2) academic and instructional support of reuse programs, (3) the use of common software engineering standards and practices, (4) software reuse technology research, and (5) interoperability between reuse libraries. This Program Management Plan (PMP) is intended to communicate program goals and objectives, describe major work areas, and define a management report and control process. This process will assist the Program Manager, University of Houston at Clear Lake (UHCL) in tracking work progress and describing major program activities to NASA management. The goal of this PMP is to make managing the RBSE program a relatively easy process that improves the work of all team members. The PMP describes work areas addressed and work efforts being accomplished by the program; however, it is not intended as a complete description of the program. Its focus is on providing management tools and management processes for monitoring, evaluating, and administering the program; and it includes schedules for charting milestones and deliveries of program products. The PMP was developed by soliciting and obtaining guidance from appropriate program participants, analyzing program management guidance, and reviewing related program management documents.

  14. The Relationship of Personality Models and Development Tasks in Software Engineering

    OpenAIRE

    Wiesche, Manuel;Krcmar, Helmut

    2015-01-01

    Understanding the personality of software developers has been an ongoing topic in software engineering research. Software engineering researchers applied different theoretical models to understand software developers? personalities to better predict software developers? performance, orchestrate more effective and motivated teams, and identify the person that fits a certain job best. However, empirical results were found as contradicting, challenging validity, and missing guidance for IT perso...

  15. A methodology for creating ontologies for engineering design

    DEFF Research Database (Denmark)

    Ahmed, Saeema; Kim, S.; Wallace, K.M.

    2007-01-01

    This paper describes a six-stage methodology for developing ontologies for engineering design, together with the research methods and evaluation of each stage. The methodology focuses upon understanding a user's domain models through empirical research. A case study of an ontology for searching......, indexing, and retrieving engineering knowledge is described. The root concepts of the ontology were elicited from engineering designers. Relationships between concepts are extracted as the ontology is populated. The contribution of this research is a methodology to allow researchers. and industry to create...... ontologies for their particular purpose and a thesaurus for the terms within the ontology....

  16. Is Scrum fit for global software engineering?

    DEFF Research Database (Denmark)

    Lous, Pernille; Kuhrmann, Marco; Tell, Paolo

    2017-01-01

    Distributed software engineering and agility are strongly pushing on today's software industry. Due to inherent incompatibilities, for years, studying Scrum and its application in distributed setups has been subject to theoretical and applied research, and an increasing body of knowledge reports...... insights into this combination. Through a systematic literature review, this paper contributes a collection of experiences on the application of Scrum to global software engineering (GSE). In total, we identified 40 challenges in 19 categories practitioners face when using Scrum in GSE. Among...... the challenges, scaling Scrum to GSE and adopting practices accordingly are the most frequently named. Our findings also show that most solution proposals aim at modifying elements of the Scrum core processes. We thus conclude that, even though Scrum allows for extensive modification, Scrum itself represents...

  17. Software engineering technology transfer: Understanding the process

    Science.gov (United States)

    Zelkowitz, Marvin V.

    1993-01-01

    Technology transfer is of crucial concern to both government and industry today. In this report, the mechanisms developed by NASA to transfer technology are explored and the actual mechanisms used to transfer software development technologies are investigated. Time, cost, and effectiveness of software engineering technology transfer is reported.

  18. High-level methodologies for grammar engineering, introduction to the special issue

    Directory of Open Access Journals (Sweden)

    Denys Duchier

    2015-06-01

    Full Text Available Grammar Engineering is the task of designing and implementing linguistically motivated electronic descriptions of natural language (so-called grammars. These grammars are expressed within well-defined theoretical frameworks, and offer a fine-grained description of natural language. While grammars were first used to describe syntax, that is to say, the relations between constituents in a sentence, they often go beyond syntax and include semantic information. Grammar engineering provides precise descriptions which can be used for natural language understanding and generation, making these valuable resources for various natural language applications, including textual entailment, dialogue systems, or machine translation. The first attempts at designing large-scale resource grammars were costly because of the complexity of the task (Erbach et al. 1990 and of the number of persons that were needed (see e.g. Doran et al. 1997. Advances in the field have led to the development of environments for semi-automatic grammar engineering, borrowing ideas from compilation (grammar engineering is compared with software development and machine learning. This special issue reports on new trends in the field, where grammar engineering benefits from elaborate high-level methodologies and techniques, dealing with various issues (both theoretical and practical.

  19. Adaptation and development of software simulation methodologies for cardiovascular engineering: present and future challenges from an end-user perspective.

    Science.gov (United States)

    Díaz-Zuccarini, V; Narracott, A J; Burriesci, G; Zervides, C; Rafiroiu, D; Jones, D; Hose, D R; Lawford, P V

    2009-07-13

    This paper describes the use of diverse software tools in cardiovascular applications. These tools were primarily developed in the field of engineering and the applications presented push the boundaries of the software to address events related to venous and arterial valve closure, exploration of dynamic boundary conditions or the inclusion of multi-scale boundary conditions from protein to organ levels. The future of cardiovascular research and the challenges that modellers and clinicians face from validation to clinical uptake are discussed from an end-user perspective.

  20. Software engineering processes for Class D missions

    Science.gov (United States)

    Killough, Ronnie; Rose, Debi

    2013-09-01

    Software engineering processes are often seen as anathemas; thoughts of CMMI key process areas and NPR 7150.2A compliance matrices can motivate a software developer to consider other career fields. However, with adequate definition, common-sense application, and an appropriate level of built-in flexibility, software engineering processes provide a critical framework in which to conduct a successful software development project. One problem is that current models seem to be built around an underlying assumption of "bigness," and assume that all elements of the process are applicable to all software projects regardless of size and tolerance for risk. This is best illustrated in NASA's NPR 7150.2A in which, aside from some special provisions for manned missions, the software processes are to be applied based solely on the criticality of the software to the mission, completely agnostic of the mission class itself. That is, the processes applicable to a Class A mission (high priority, very low risk tolerance, very high national significance) are precisely the same as those applicable to a Class D mission (low priority, high risk tolerance, low national significance). This paper will propose changes to NPR 7150.2A, taking mission class into consideration, and discuss how some of these changes are being piloted for a current Class D mission—the Cyclone Global Navigation Satellite System (CYGNSS).

  1. Collected software engineering papers, volume 7

    Science.gov (United States)

    1989-01-01

    A collection is presented of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) during the period Dec. 1988 to Oct. 1989. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. For the convenience of this presentation, the seven papers contained here are grouped into three major categories: (1) Software Measurement and Technology Studies; (2) Measurement Environment Studies; and (3) Ada Technology Studies. The first category presents experimental research and evaluation of software measurement and technology; the second presents studies on software environments pertaining to measurement. The last category represents Ada technology and includes research, development, and measurement studies.

  2. Nuclear EMP: ingredients of an EMP protection engineering methodology

    International Nuclear Information System (INIS)

    Latorre, V.R.; Spogen, L.R. Jr.

    1977-02-01

    A fundamental methodology of electromagnetic pulse (EMP) protection engineering is described. Operations performed within the framework of this methodology are discussed. These operations, along with problem constraints and data, constitute the essential ingredients needed to implement the overall engineering methodology. Basic definitions and descriptions of these essential ingredients are provided. The issues discussed represent the first step in developing a methodology for protecting systems against EMP effects

  3. Architecture independent environment for developing engineering software on MIMD computers

    Science.gov (United States)

    Valimohamed, Karim A.; Lopez, L. A.

    1990-01-01

    Engineers are constantly faced with solving problems of increasing complexity and detail. Multiple Instruction stream Multiple Data stream (MIMD) computers have been developed to overcome the performance limitations of serial computers. The hardware architectures of MIMD computers vary considerably and are much more sophisticated than serial computers. Developing large scale software for a variety of MIMD computers is difficult and expensive. There is a need to provide tools that facilitate programming these machines. First, the issues that must be considered to develop those tools are examined. The two main areas of concern were architecture independence and data management. Architecture independent software facilitates software portability and improves the longevity and utility of the software product. It provides some form of insurance for the investment of time and effort that goes into developing the software. The management of data is a crucial aspect of solving large engineering problems. It must be considered in light of the new hardware organizations that are available. Second, the functional design and implementation of a software environment that facilitates developing architecture independent software for large engineering applications are described. The topics of discussion include: a description of the model that supports the development of architecture independent software; identifying and exploiting concurrency within the application program; data coherence; engineering data base and memory management.

  4. Semantic Web technologies in software engineering

    OpenAIRE

    Gall, H C; Reif, G

    2008-01-01

    Over the years, the software engineering community has developed various tools to support the specification, development, and maintainance of software. Many of these tools use proprietary data formats to store artifacts which hamper interoperability. However, the Semantic Web provides a common framework that allows data to be shared and reused across application, enterprise, and community boundaries. Ontologies are used define the concepts in the domain of discourse and their relationships an...

  5. Infusing Software Engineering Technology into Practice at NASA

    Science.gov (United States)

    Pressburger, Thomas; Feather, Martin S.; Hinchey, Michael; Markosia, Lawrence

    2006-01-01

    We present an ongoing effort of the NASA Software Engineering Initiative to encourage the use of advanced software engineering technology on NASA projects. Technology infusion is in general a difficult process yet this effort seems to have found a modest approach that is successful for some types of technologies. We outline the process and describe the experience of the technology infusions that occurred over a two year period. We also present some lessons from the experiences.

  6. Resilience Engineering in Critical Long Term Aerospace Software Systems: A New Approach to Spacecraft Software Safety

    Science.gov (United States)

    Dulo, D. A.

    Safety critical software systems permeate spacecraft, and in a long term venture like a starship would be pervasive in every system of the spacecraft. Yet software failure today continues to plague both the systems and the organizations that develop them resulting in the loss of life, time, money, and valuable system platforms. A starship cannot afford this type of software failure in long journeys away from home. A single software failure could have catastrophic results for the spaceship and the crew onboard. This paper will offer a new approach to developing safe reliable software systems through focusing not on the traditional safety/reliability engineering paradigms but rather by focusing on a new paradigm: Resilience and Failure Obviation Engineering. The foremost objective of this approach is the obviation of failure, coupled with the ability of a software system to prevent or adapt to complex changing conditions in real time as a safety valve should failure occur to ensure safe system continuity. Through this approach, safety is ensured through foresight to anticipate failure and to adapt to risk in real time before failure occurs. In a starship, this type of software engineering is vital. Through software developed in a resilient manner, a starship would have reduced or eliminated software failure, and would have the ability to rapidly adapt should a software system become unstable or unsafe. As a result, long term software safety, reliability, and resilience would be present for a successful long term starship mission.

  7. Surfing the Edge of Chaos: Applications to Software Engineering

    National Research Council Canada - National Science Library

    Nogueira, Juan C; Jones, Carl

    2000-01-01

    .... We discuss the feasibility of using this theory in software engineering as an alternative to bureaucratic software development processes. We present also some recommendations that could help to acquire competitive advantage in software development, hence achieve information superiority.

  8. Proceedings of the International Conference on Algebraic Methodology and Software Technology (3rd) Held in The Netherlands on June 21 - 25, 1993

    Science.gov (United States)

    1993-06-25

    the essence of algebraic methodology. So let us examine what algebra is. Etymology often is a key to the meaning. We asked a few of our learned...colleagues about the etymology of "algebra" and then consulted Webster. It turns out that folklore and Webster disagree on the etymology of "algebra...Engineers need to know much more than chemistry , Software Engineers will need to know more than Computer Science and Mathematics. Because we cannot

  9. Proceedings of the Twenty-Third Annual Software Engineering Workshop

    Science.gov (United States)

    1999-01-01

    The Twenty-third Annual Software Engineering Workshop (SEW) provided 20 presentations designed to further the goals of the Software Engineering Laboratory (SEL) of the NASA-GSFC. The presentations were selected on their creativity. The sessions which were held on 2-3 of December 1998, centered on the SEL, Experimentation, Inspections, Fault Prediction, Verification and Validation, and Embedded Systems and Safety-Critical Systems.

  10. Performance Engineering Technology for Scientific Component Software

    Energy Technology Data Exchange (ETDEWEB)

    Malony, Allen D.

    2007-05-08

    Large-scale, complex scientific applications are beginning to benefit from the use of component software design methodology and technology for software development. Integral to the success of component-based applications is the ability to achieve high-performing code solutions through the use of performance engineering tools for both intra-component and inter-component analysis and optimization. Our work on this project aimed to develop performance engineering technology for scientific component software in association with the DOE CCTTSS SciDAC project (active during the contract period) and the broader Common Component Architecture (CCA) community. Our specific implementation objectives were to extend the TAU performance system and Program Database Toolkit (PDT) to support performance instrumentation, measurement, and analysis of CCA components and frameworks, and to develop performance measurement and monitoring infrastructure that could be integrated in CCA applications. These objectives have been met in the completion of all project milestones and in the transfer of the technology into the continuing CCA activities as part of the DOE TASCS SciDAC2 effort. In addition to these achievements, over the past three years, we have been an active member of the CCA Forum, attending all meetings and serving in several working groups, such as the CCA Toolkit working group, the CQoS working group, and the Tutorial working group. We have contributed significantly to CCA tutorials since SC'04, hosted two CCA meetings, participated in the annual ACTS workshops, and were co-authors on the recent CCA journal paper [24]. There are four main areas where our project has delivered results: component performance instrumentation and measurement, component performance modeling and optimization, performance database and data mining, and online performance monitoring. This final report outlines the achievements in these areas for the entire project period. The submitted progress

  11. Towards E-CASE Tools for Software Engineering

    OpenAIRE

    Nabil Arman

    2013-01-01

    CASE tools are having an important role in all phases of software systems development and engineering. This is evident in the huge benefits obtained from using these tools including their cost-effectiveness, rapid software application development, and improving the possibility of software reuse to name just a few. In this paper, the idea of moving towards E-CASE tools, rather than traditional CASE tools, is advocated since these E-CASE tools have all the benefits and advantages of traditional...

  12. COTS-based OO-component approach for software inter-operability and reuse (software systems engineering methodology)

    Science.gov (United States)

    Yin, J.; Oyaki, A.; Hwang, C.; Hung, C.

    2000-01-01

    The purpose of this research and study paper is to provide a summary description and results of rapid development accomplishments at NASA/JPL in the area of advanced distributed computing technology using a Commercial-Off--The-Shelf (COTS)-based object oriented component approach to open inter-operable software development and software reuse.

  13. Collected software engineering papers, volume 6

    Science.gov (United States)

    1988-01-01

    A collection is presented of technical papers produced by participants in the Software Engineering Laboratory (SEL) during the period 1 Jun. 1987 to 1 Jan. 1989. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. For the convenience of this presentation, the twelve papers contained here are grouped into three major categories: (1) Software Measurement and Technology Studies; (2) Measurement Environment Studies; and (3) Ada Technology Studies. The first category presents experimental research and evaluation of software measurement and technology; the second presents studies on software environments pertaining to measurement. The last category represents Ada technology and includes research, development, and measurement studies.

  14. Proceedings of the 14th Annual Software Engineering Workshop

    Science.gov (United States)

    1989-01-01

    Several software related topics are presented. Topics covered include studies and experiment at the Software Engineering Laboratory at the Goddard Space Flight Center, predicting project success from the Software Project Management Process, software environments, testing in a reuse environment, domain directed reuse, and classification tree analysis using the Amadeus measurement and empirical analysis.

  15. Pengembangan Aplikasi Manajemen Pelatihan Laboratorium Software Engineering Di Fakultas Teknik Sistem Komputer

    Directory of Open Access Journals (Sweden)

    Faiz Risaludin Islami

    2016-04-01

    Full Text Available System computer engineering of Diponegoro University has a software engineering laboratory fonctioned to provide the learning and training activities in order to give the opportunity for the students, to examine and to apply the theory or the research and the verification scientifical subject study or a part of certain subject study. The probleme emerge in this training is less the information about the training accepted by the society who willing to attend the training at the software engineering laboratory. In propose, to solve all the problemes appear, the writer make a Management Trainee Developement Application System of Software Engineering Laboratory at Faculty of System Computer Engineering gave a complete information about the training and the registration in software engineering laboratory. Management Trainee Application of Software Engineering Laboratory at Faculty of System Computer Engineering is an application based on website, made by using the program language PHP in scope Framework Code Igniter, and also MySQL for database. The developement methode used the waterfall methode, while designing the application used the UML modele. The result from this application is the realization an application based on website which is abble to manage the trainee data in software engineering laboratory, for example to manage the participant training data, the list of training data, the time schedule training data, admin data, the participant traininh data along the completed training History data.

  16. Development of a flight software testing methodology

    Science.gov (United States)

    Mccluskey, E. J.; Andrews, D. M.

    1985-01-01

    The research to develop a testing methodology for flight software is described. An experiment was conducted in using assertions to dynamically test digital flight control software. The experiment showed that 87% of typical errors introduced into the program would be detected by assertions. Detailed analysis of the test data showed that the number of assertions needed to detect those errors could be reduced to a minimal set. The analysis also revealed that the most effective assertions tested program parameters that provided greater indirect (collateral) testing of other parameters. In addition, a prototype watchdog task system was built to evaluate the effectiveness of executing assertions in parallel by using the multitasking features of Ada.

  17. New software engineering paradigm based on complexity science an introduction to NSE

    CERN Document Server

    Xiong, Jay

    2011-01-01

    This book describes a revolution in software engineering - the Nonlinear Software Engineering paradigm, which complies with the essential principles of complexity science and can help double productivity, halve costs and reduce defects in software products.

  18. A model-based software development methodology for high-end automotive components

    NARCIS (Netherlands)

    Ravanan, Mahmoud

    2014-01-01

    This report provides a model-based software development methodology for high-end automotive components. The V-model is used as a process model throughout the development of the software platform. It offers a framework that simplifies the relation between requirements, design, implementation,

  19. Perspectives on the future of software engineering essays in honor of Dieter Rombach

    CERN Document Server

    Münch, Jürgen

    2013-01-01

    The dependence on quality software in all areas of life is what makes software engineering a key discipline for today's society. Thus, over the last few decades it has been increasingly recognized that it is particularly important to demonstrate the value of software engineering methods in real-world environments, a task which is the focus of empirical software engineering. One of the leading protagonists of this discipline worldwide is Prof. Dr. Dr. h.c. Dieter Rombach, who dedicated his entire career to empirical software engineering. For his many important contributions to the field he has

  20. Cooperative and Human Aspects of Software Engineering (CHASE 2010)

    DEFF Research Database (Denmark)

    Dittrich, Yvonne; De Souza, Cleidson; Korpela, Mikko

    2010-01-01

    Software is created by people---software engineers---working in varied environments, under various conditions. Thus understanding cooperative and human aspect of software development is crucial to comprehend how methods and tools are used, and thereby improving the creation and maintenance...... research on human and cooperative aspects of software engineering. We aim at providing both a meeting place for the growing community and the possibility for researchers interested in joining the field to present their work in progress and get an overview over the field....... of software. Inspired by the hosting country's concept of co-responsibility -- ubuntu -- we especially invited contributions that address community-based development like open source development and sustainability of ICT eco-systems. The goal of this workshop is to provide a forum for discussing high quality...

  1. 4th International Conference in Software Engineering for Defence Applications

    CERN Document Server

    Sillitti, Alberto; Succi, Giancarlo; Messina, Angelo

    2016-01-01

    This book presents high-quality original contributions on new software engineering models, approaches, methods, and tools and their evaluation in the context of defence and security applications. In addition, important business and economic aspects are discussed, with a particular focus on cost/benefit analysis, new business models, organizational evolution, and business intelligence systems. The contents are based on presentations delivered at SEDA 2015, the 4th International Conference in Software Engineering for Defence Applications, which was held in Rome, Italy, in May 2015. This conference series represents a targeted response to the growing need for research that reports and debates the practical implications of software engineering within the defence environment and also for software performance evaluation in real settings through controlled experiments as well as case and field studies. The book will appeal to all with an interest in modeling, managing, and implementing defence-related software devel...

  2. A multi-agent approach to professional software engineering

    NARCIS (Netherlands)

    M. Lützenberger; T. Küster; T. Konnerth; A. Thiele; N. Masuch; A. Heßler; J. Keiser; M. Burkhardt; S. Kaiser (Silvan); J. Tonn; M. Kaisers (Michael); S. Albayrak; M. Cossentino; A. Seghrouchni; M. Winikoff

    2013-01-01

    htmlabstractThe community of agent researchers and engineers has produced a number of interesting and mature results. However, agent technology is still not widely adopted by industrial software developers or software companies - possibly because existing frameworks are infused with academic

  3. Component-based development of software language engineering tools

    NARCIS (Netherlands)

    Ssanyu, J.; Hemerik, C.

    2011-01-01

    In this paper we outline how Software Language Engineering (SLE) could benefit from Component-based Software Development (CBSD) techniques and present an architecture aimed at developing a coherent set of lightweight SLE components, fitting into a general-purpose component framework. In order to

  4. Real World Software Engineering

    Science.gov (United States)

    1994-07-15

    You put the new kid there and their first promotion is out of maintenance. ii Maintenance is not sufficiently emphasized as an important criteria for...the successful material from Koffman’s CS1 pedagogy with a software-engineering-oriented Ada presentation order. Packages are introduced early and...Shumate, K. Understanding Ada. 2nd edition, John Wiley & Sons. This would make a CS1 book if it included more overall pedagogy , independent of language

  5. Shaping Software Engineering Curricula Using Open Source Communities: A Case Study

    Science.gov (United States)

    Bowring, James; Burke, Quinn

    2016-01-01

    This paper documents four years of a novel approach to teaching a two-course sequence in software engineering as part of the ABET-accredited computer science curriculum at the College of Charleston. This approach is team-based and centers on learning software engineering in the context of open source software projects. In the first course, teams…

  6. Green Software Engineering Adaption In Requirement Elicitation Process

    Directory of Open Access Journals (Sweden)

    Umma Khatuna Jannat

    2015-08-01

    Full Text Available A recent technology investigates the role of concern in the environment software that is green software system. Now it is widely accepted that the green software can fit all process of software development. It is also suitable for the requirement elicitation process. Now a days software companies have used requirements elicitation techniques in an enormous majority. Because this process plays more and more important roles in software development. At the present time most of the requirements elicitation process is improved by using some techniques and tools. So that the intention of this research suggests to adapt green software engineering for the intention of existing elicitation technique and recommend suitable actions for improvement. This research being involved qualitative data. I used few keywords in my searching procedure then searched IEEE ACM Springer Elsevier Google scholar Scopus and Wiley. Find out articles which published in 2010 until 2016. Finding from the literature review Identify 15 traditional requirement elicitations factors and 23 improvement techniques to convert green engineering. Lastly The paper includes a squat review of the literature a description of the grounded theory and some of the identity issues related finding of the necessity for requirements elicitation improvement techniques.

  7. Situational Method Engineering

    OpenAIRE

    Henderson-Sellers, Brian; Ralyte, Jolita; Par, Agerfalk; Rossi, Matti

    2014-01-01

    While previously available methodologies for software – like those published in the early days of object technology – claimed to be appropriate for every conceivable project, situational method engineering (SME) acknowledges that most projects typically have individual characteristics and situations. Thus, finding the most effective methodology for a particular project needs specific tailoring to that situation. Such a tailored software development methodology needs to take into account all t...

  8. ETICS the international software engineering service for the grid

    CERN Document Server

    Di Meglio, A; Couvares, P; Ronchieri, E; Takács, E

    2008-01-01

    The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects ...

  9. Development of a methodology for assessing the safety of embedded software systems

    Science.gov (United States)

    Garrett, C. J.; Guarro, S. B.; Apostolakis, G. E.

    1993-01-01

    A Dynamic Flowgraph Methodology (DFM) based on an integrated approach to modeling and analyzing the behavior of software-driven embedded systems for assessing and verifying reliability and safety is discussed. DFM is based on an extension of the Logic Flowgraph Methodology to incorporate state transition models. System models which express the logic of the system in terms of causal relationships between physical variables and temporal characteristics of software modules are analyzed to determine how a certain state can be reached. This is done by developing timed fault trees which take the form of logical combinations of static trees relating the system parameters at different point in time. The resulting information concerning the hardware and software states can be used to eliminate unsafe execution paths and identify testing criteria for safety critical software functions.

  10. Software Engineering Research/Developer Collaborations in 2004 (C104)

    Science.gov (United States)

    Pressburger, Tom; Markosian, Lawrance

    2005-01-01

    In 2004, six collaborations between software engineering technology providers and NASA software development personnel deployed a total of five software engineering technologies (for references, see Section 7.2) on the NASA projects. The main purposes were to benefit the projects, infuse the technologies if beneficial into NASA, and give feedback to the technology providers to improve the technologies. Each collaboration project produced a final report (for references, see Section 7.1). Section 2 of this report summarizes each project, drawing from the final reports and communications with the software developers and technology providers. Section 3 indicates paths to further infusion of the technologies into NASA practice. Section 4 summarizes some technology transfer lessons learned. Section 6 lists the acronyms used in this report.

  11. Two methodologies for optical analysis of contaminated engine lubricants

    International Nuclear Information System (INIS)

    Aghayan, Hamid; Yang, Jun; Bordatchev, Evgueni

    2012-01-01

    The performance, efficiency and lifetime of modern combustion engines significantly depend on the quality of the engine lubricants. However, contaminants, such as gasoline, moisture, coolant and wear particles, reduce the life of engine mechanical components and lubricant quality. Therefore, direct and indirect measurements of engine lubricant properties, such as physical-mechanical, electro-magnetic, chemical and optical properties, are intensively utilized in engine condition monitoring systems and sensors developed within the last decade. Such sensors for the measurement of engine lubricant properties can be used to detect a functional limit of the in-use lubricant, increase drain interval and reduce the environmental impact. This paper proposes two new methodologies for the quantitative and qualitative analysis of the presence of contaminants in the engine lubricants. The methodologies are based on optical analysis of the distortion effect when an object image is obtained through a thin random optical medium (e.g. engine lubricant). The novelty of the proposed methodologies is in the introduction of an object with a known periodic shape behind a thin film of the contaminated lubricant. In this case, an acquired image represents a combined lubricant–object optical appearance, where an a priori known periodic structure of the object is distorted by a contaminated lubricant. In the object shape-based optical analysis, several parameters of an acquired optical image, such as the gray scale intensity of lubricant and object, shape width at object and lubricant levels, object relative intensity and width non-uniformity coefficient are newly proposed. Variations in the contaminant concentration and use of different contaminants lead to the changes of these parameters measured on-line. In the statistical optical analysis methodology, statistical auto- and cross-characteristics (e.g. auto- and cross-correlation functions, auto- and cross-spectrums, transfer function

  12. Performance testing of 3D point cloud software

    Science.gov (United States)

    Varela-González, M.; González-Jorge, H.; Riveiro, B.; Arias, P.

    2013-10-01

    LiDAR systems are being used widely in recent years for many applications in the engineering field: civil engineering, cultural heritage, mining, industry and environmental engineering. One of the most important limitations of this technology is the large computational requirements involved in data processing, especially for large mobile LiDAR datasets. Several software solutions for data managing are available in the market, including open source suites, however, users often unknown methodologies to verify their performance properly. In this work a methodology for LiDAR software performance testing is presented and four different suites are studied: QT Modeler, VR Mesh, AutoCAD 3D Civil and the Point Cloud Library running in software developed at the University of Vigo (SITEGI). The software based on the Point Cloud Library shows better results in the loading time of the point clouds and CPU usage. However, it is not as strong as commercial suites in working set and commit size tests.

  13. Performance testing of 3D point cloud software

    Directory of Open Access Journals (Sweden)

    M. Varela-González

    2013-10-01

    Full Text Available LiDAR systems are being used widely in recent years for many applications in the engineering field: civil engineering, cultural heritage, mining, industry and environmental engineering. One of the most important limitations of this technology is the large computational requirements involved in data processing, especially for large mobile LiDAR datasets. Several software solutions for data managing are available in the market, including open source suites, however, users often unknown methodologies to verify their performance properly. In this work a methodology for LiDAR software performance testing is presented and four different suites are studied: QT Modeler, VR Mesh, AutoCAD 3D Civil and the Point Cloud Library running in software developed at the University of Vigo (SITEGI. The software based on the Point Cloud Library shows better results in the loading time of the point clouds and CPU usage. However, it is not as strong as commercial suites in working set and commit size tests.

  14. Engineering software development with HyperCard

    Science.gov (United States)

    Darko, Robert J.

    1990-01-01

    The successful and unsuccessful techniques used in the development of software using HyperCard are described. The viability of the HyperCard for engineering is evaluated and the future use of HyperCard by this particular group of developers is discussed.

  15. On the Prospects and Concerns of Integrating Open Source Software Environment in Software Engineering Education

    Science.gov (United States)

    Kamthan, Pankaj

    2007-01-01

    Open Source Software (OSS) has introduced a new dimension in software community. As the development and use of OSS becomes prominent, the question of its integration in education arises. In this paper, the following practices fundamental to projects and processes in software engineering are examined from an OSS perspective: project management;…

  16. Methodology discourses as boundary work in the construction of engineering education.

    Science.gov (United States)

    Beddoes, Kacey

    2014-04-01

    Engineering education research is a new field that emerged in the social sciences over the past 10 years. This analysis of engineering education research demonstrates that methodology discourses have played a central role in the construction and development of the field of engineering education, and that they have done so primarily through boundary work. This article thus contributes to science and technology studies literature by examining the role of methodology discourses in an emerging social science field. I begin with an overview of engineering education research before situating the case within relevant bodies of literature on methodology discourses and boundary work. I then identify two methodology discourses--rigor and methodological diversity--and discuss how they contribute to the construction and development of engineering education research. The article concludes with a discussion of how the findings relate to prior research on methodology discourses and boundary work and implications for future research.

  17. Professional Training in Software Engineering: A Critical Need in the United States

    Directory of Open Access Journals (Sweden)

    Jennifer Waldrow

    2012-06-01

    Full Text Available The software is related to almost every aspect of daily life: manufacturing, banking, travel, communications, defense, medicine, research, government, education, entertainment, law ... Is an essential part of military systems and is used in all civilian sectors, including safety and mission critical. Moreover, the complexity of many of these systems has increased exponentially in recent decades and the software has become an essential component for all of them. Unfortunately, the "systems of higher education", in almost all countries have not kept pace with these changes. The current science and engineering programs, both undergraduate and graduate, they need to incorporate more training in Software Engineering. It is especially true in areas such as aerospace engineering, because these systems are highly dependent on computer, information, communications and software. This article presents an analysis of the current situation of the United States in what has to do with software engineering training that receive and require the aerospace engineers.

  18. Teaching Agile Software Development: A Case Study

    Science.gov (United States)

    Devedzic, V.; Milenkovic, S. R.

    2011-01-01

    This paper describes the authors' experience of teaching agile software development to students of computer science, software engineering, and other related disciplines, and comments on the implications of this and the lessons learned. It is based on the authors' eight years of experience in teaching agile software methodologies to various groups…

  19. A Guideline of Using Case Method in Software Engineering Courses

    Science.gov (United States)

    Zainal, Dzulaiha Aryanee Putri; Razali, Rozilawati; Shukur, Zarina

    2014-01-01

    Software Engineering (SE) education has been reported to fall short in producing high quality software engineers. In seeking alternative solutions, Case Method (CM) is regarded as having potential to solve the issue. CM is a teaching and learning (T&L) method that has been found to be effective in Social Science education. In principle,…

  20. The SE Book: Principles and Techniques of Software Engineering or orAn ABZ of The Theory & Practice of Software Engineering

    DEFF Research Database (Denmark)

    Bjørner, Dines

    ) the TripTych of domain analysis, requirements engineering and software design -- and much much more. It relates all aspects of (12) platform technologies, (13) legal issues of software, (14) quality assurance, and (15) project and product management to the above (1-11 incl.). Highlights of the book series......This ``epos'' emphasises (1) software development from both a formal and an informal approach; (2) the use of mathematics, logic and algebras, as well as discrete mathematics: Sets, Cartesians, lists, functions, maps; (3) property as well as model-oriented specifications; (4) semiotics in the form...... are: (A) Emphasis on design: Literally a thousand development examples are given; and on ``Calculi'' of (B) domain and (C) requirements engineering: Domain facet ``operators'' like: (d.1) Instrinsics, (d.2) support technology, (d.3) management & organisation, (d.4) rules & regulations, (d.5) human...

  1. Psychological Safety and Norm Clarity in Software Engineering Teams

    OpenAIRE

    Lenberg, Per; Feldt, Robert

    2018-01-01

    In the software engineering industry today, companies primarily conduct their work in teams. To increase organizational productivity, it is thus crucial to know the factors that affect team effectiveness. Two team-related concepts that have gained prominence lately are psychological safety and team norms. Still, few studies exist that explore these in a software engineering context. Therefore, with the aim of extending the knowledge of these concepts, we examined if psychological safety and t...

  2. Model-based engineering for medical-device software.

    Science.gov (United States)

    Ray, Arnab; Jetley, Raoul; Jones, Paul L; Zhang, Yi

    2010-01-01

    This paper demonstrates the benefits of adopting model-based design techniques for engineering medical device software. By using a patient-controlled analgesic (PCA) infusion pump as a candidate medical device, the authors show how using models to capture design information allows for i) fast and efficient construction of executable device prototypes ii) creation of a standard, reusable baseline software architecture for a particular device family, iii) formal verification of the design against safety requirements, and iv) creation of a safety framework that reduces verification costs for future versions of the device software. 1.

  3. Video Games and Software Engineers : Designing a study based on the benefits from Video Games and how they can improve Software Engineers

    OpenAIRE

    Cosic Prica, Srdjan

    2017-01-01

    Context: This is a study about investigating if playing video games can improve any skills and characteristics in a software engineer. Due to lack of resources and time, this study will focus on designing a study that others may use to measure the results and if video games actually can improve software engineers. Objectives: The main objectives are finding the benefits of playing video games and how those benefits are discovered. Meaning what types of games and for how long someone needs to ...

  4. Spent nuclear fuel application of CORE reg-sign systems engineering software

    International Nuclear Information System (INIS)

    Grimm, R.J.

    1996-01-01

    The DOE has adopted a systems engineering approach for the successful completion of the Spent Nuclear Fuel (SNF) Program mission. The DOE has utilized systems engineering principles to develop the SNF program guidance documents and has held several systems engineering workshops to develop the functional hierarchies of both the programmatic and technical side of the SNF program. The sheer size and complexity of the SNF program has led to problems that the Westinghouse Savannah River Company (WSRC) is working to manage through the use of systems engineering software. WSRC began using CORE reg-sign, an off the shelf PC based software package, to assist DOE in management of the SNF program. This paper details the successful use of the CORE reg-sign systems engineering software to date and the proposed future activities

  5. Creating a strategic plan for configuration management using computer aided software engineering (CASE) tools

    International Nuclear Information System (INIS)

    Smith, P.R.; Sarfaty, R.

    1993-01-01

    This paper provides guidance in the definition, documentation, measurement, enhancement of processes, and validation of a strategic plan for configuration management (CM). The approach and methodology used in establishing a strategic plan is the same for any enterprise, including the Department of Energy (DOE), commercial nuclear plants, the Department of Defense (DOD), or large industrial complexes. The principles and techniques presented are used world wide by some of the largest corporations. The authors used industry knowledge and the areas of their current employment to illustrate and provide examples. Developing a strategic configuration and information management plan for DOE Idaho Field Office (DOE-ID) facilities is discussed in this paper. A good knowledge of CM principles is the key to successful strategic planning. This paper will describe and define CM elements, and discuss how CM integrates the facility's physical configuration, design basis, and documentation. The strategic plan does not need the support of a computer aided software engineering (CASE) tool. However, the use of the CASE tool provides a methodology for consistency in approach, graphics, and database capability combined to form an encyclopedia and a method of presentation that is easily understood and aids the process of reengineering. CASE tools have much more capability than those stated above. Some examples are supporting a joint application development group (JAD) to prepare a software functional specification document and, if necessary, provide the capability to automatically generate software application code. This paper briefly discusses characteristics and capabilities of two CASE tools that use different methodologies to generate similar deliverables

  6. Overcoming public speaking anxiety of software engineers using virtual reality exposure therapy.

    OpenAIRE

    Nazligul, Merve Denizc; Yilmaz, Murat; Gulec, Ulas; Ali Gozcu, Mert; O'Connor, Rory; Clarke, Paul

    2017-01-01

    Public speaking anxiety is a type of social phobia, which might be commonly seen in novice software engineers. It is usually triggered by a fear of social performance especially when the performer is unfamiliar with the audience. Today, many software engineering activities (e.g. code inspection, peer review, daily meetings, etc.) require social gatherings where individuals need to present their work. However, novice software engineers may not be able to reduce their performance anxiety during...

  7. Sandia National Laboratories ASCI Applications Software Quality Engineering Practices; TOPICAL

    International Nuclear Information System (INIS)

    ZEPPER, JOHN D.; ARAGON, KATHRYN MARY; ELLIS, MOLLY A.; BYLE, KATHLEEN A.; EATON, DONNA SUE

    2002-01-01

    This document provides a guide to the deployment of the software verification activities, software engineering practices, and project management principles that guide the development of Accelerated Strategic Computing Initiative (ASCI) applications software at Sandia National Laboratories (Sandia). The goal of this document is to identify practices and activities that will foster the development of reliable and trusted products produced by the ASCI Applications program. Document contents include an explanation of the structure and purpose of the ASCI Quality Management Council, an overview of the software development lifecycle, an outline of the practices and activities that should be followed, and an assessment tool. These sections map practices and activities at Sandia to the ASCI Software Quality Engineering: Goals, Principles, and Guidelines, a Department of Energy document

  8. A technical survey on issues of the quantitative evaluation of software reliability

    International Nuclear Information System (INIS)

    Park, J. K; Sung, T. Y.; Eom, H. S.; Jeong, H. S.; Park, J. H.; Kang, H. G.; Lee, K. Y.; Park, J. K.

    2000-04-01

    To develop the methodology for evaluating the software reliability included in digital instrumentation and control system (I and C), many kinds of methodologies/techniques that have been proposed from the software reliability engineering fuel are analyzed to identify the strong and week points of them. According to analysis results, methodologies/techniques that can be directly applied for the evaluation of the software reliability are not exist. Thus additional researches to combine the most appropriate methodologies/techniques from existing ones would be needed to evaluate the software reliability. (author)

  9. Software Engineering Infrastructure in a Large Virtual Campus

    Science.gov (United States)

    Cristobal, Jesus; Merino, Jorge; Navarro, Antonio; Peralta, Miguel; Roldan, Yolanda; Silveira, Rosa Maria

    2011-01-01

    Purpose: The design, construction and deployment of a large virtual campus are a complex issue. Present virtual campuses are made of several software applications that complement e-learning platforms. In order to develop and maintain such virtual campuses, a complex software engineering infrastructure is needed. This paper aims to analyse the…

  10. Research on Visualization Design Method in the Field of New Media Software Engineering

    Science.gov (United States)

    Deqiang, Hu

    2018-03-01

    In the new period of increasingly developed science and technology, with the increasingly fierce competition in the market and the increasing demand of the masses, new design and application methods have emerged in the field of new media software engineering, that is, the visualization design method. Applying the visualization design method to the field of new media software engineering can not only improve the actual operation efficiency of new media software engineering but more importantly the quality of software development can be enhanced by means of certain media of communication and transformation; on this basis, the progress and development of new media software engineering in China are also continuously promoted. Therefore, the application of visualization design method in the field of new media software engineering is analysed concretely in this article from the perspective of the overview of visualization design methods and on the basis of systematic analysis of the basic technology.

  11. A Web-based modeling tool for the SEMAT Essence theory of software engineering

    Directory of Open Access Journals (Sweden)

    Daniel Graziotin

    2013-09-01

    Full Text Available As opposed to more mature subjects, software engineering lacks general theories that establish its foundations as a discipline. The Essence Theory of software engineering (Essence has been proposed by the Software Engineering Methods and Theory (SEMAT initiative. The goal of Essence is to develop a theoretically sound basis for software engineering practice and its wide adoption. However, Essence is far from reaching academic- and industry-wide adoption. The reasons for this include a struggle to foresee its utilization potential and a lack of tools for implementation. SEMAT Accelerator (SematAcc is a Web-positioning tool for a software engineering endeavor, which implements the SEMAT’s Essence kernel. SematAcc permits the use of Essence, thus helping to understand it. The tool enables the teaching, adoption, and research of Essence in controlled experiments and case studies.

  12. A Story-Telling Approach for a Software Engineering Course Design

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    2009-01-01

    Advanced programming and software engineering techniques are challenging to learn due to their inherent complexity. However, to the average student they are even more challenging because they have never experienced the context in which the techniques are appropriate. For instance, why learn design...... patterns to increase maintainability when student exercises are never maintained? In this paper, we outline the contextual problems that software engineering teaching has to deal with and present a story telling approach for course design as a remedy. We outline the stories that over the last five years...... have structured lecturing and mandatory exercises for our advanced programming/software engineering course, and present benefits, liabilities, and experiences with the approach comparing it to the normal, topic structured, course design....

  13. APPLICATION OF APM WINMACHINE SOFTWARE FOR DESIGN AND CALCULATIONS IN MECHANICAL ENGINEERING

    Directory of Open Access Journals (Sweden)

    L. O. Neduzha

    2016-04-01

    Full Text Available Purpose.To conduct the research at all stages of design, development, operation, residual operation life determination, namely, preliminary study, action principle choice, design of draft and technical projects, their optimization, preparation of design documentation and control information for automated production, comprehensive engineering analysis, it is required to use the latest computer technologies. Their use can not only present data and information in some way, but also gives the opportunity to effectively and directly interact with the information object that is created or demonstrated. Methodology.To perform engineering calculations associated with the analysis of the strength of machines, mechanisms, constructions one uses both analytical and numerical methods in practice.The most common method for analysing the stress-strain state of object models, obtaining their dynamic and stability characteristics at constant and variable modes of external load is the finite element method, which is implemented in many famous and widespread software products, providing strength calculation of models of machines, mechanisms and structures. Findings.The use of modern software for designing machine parts and various types of their joints and for strength analysis of structures is justified. Colour charts for distribution of stresses, displacement, internal efforts, safety factor and others allow accurate and quick identification of the most dangerous places in the structure. The program also provides an opportunity to «look» inside the elements and see the resulting distribution of internal force factors. Originality.The paper considered the aspects, which are unexplored at present, associated with the current state and prospects of development of industrial production, the use of software package for design and calculations in the mechanical industry. The result of the work is the justification of software application for solving problems that

  14. Spent nuclear fuel application of CORE reg-sign systems engineering software

    International Nuclear Information System (INIS)

    Grimm, R.J.

    1996-01-01

    The Department of Energy (DOE) has adopted a systems engineering approach for the successful completion of the Spent Nuclear Fuel (SNF) Program mission. The DOE has utilized systems engineering principles to develop the SNF Program guidance documents and has held several systems engineering workshops to develop the functional hierarchies of both the programmatic and technical side of the SNF Program. The sheer size and complexity of the SNF Program, however, has led to problems that the Westinghouse Savannah River Company (WSRC) is working to manage through the use of systems engineering software. WSRC began using CORE reg-sign, an off-the-shelf PC based software package, to assist the DOE in management of the SNF program. This paper details the successful use of the CORE reg-sign systems engineering software to date and the proposed future activities

  15. Revisiting the Global Software Engineering Terminology

    DEFF Research Database (Denmark)

    Tell, Paolo; Giuffrida, Rosalba; Shah, Hina

    2013-01-01

    Even though Global Software Engineering (GSE) has been a research topic of interest for many years, some of its ground terminology is still lacking a unified, coherent, and shared definition and/or classification. The purpose of this report is to collect, outline, and relate several fundamental...

  16. Considerations of the Software Metric-based Methodology for Software Reliability Assessment in Digital I and C Systems

    International Nuclear Information System (INIS)

    Ha, J. H.; Kim, M. K.; Chung, B. S.; Oh, H. C.; Seo, M. R.

    2007-01-01

    Analog I and C systems have been replaced by digital I and C systems because the digital systems have many potential benefits to nuclear power plants in terms of operational and safety performance. For example, digital systems are essentially free of drifts, have higher data handling and storage capabilities, and provide improved performance by accuracy and computational capabilities. In addition, analog replacement parts become more difficult to obtain since they are obsolete and discontinued. There are, however, challenges to the introduction of digital technology into the nuclear power plants because digital systems are more complex than analog systems and their operation and failure modes are different. Especially, software, which can be the core of functionality in the digital systems, does not wear out physically like hardware and its failure modes are not yet defined clearly. Thus, some researches to develop the methodology for software reliability assessment are still proceeding in the safety-critical areas such as nuclear system, aerospace and medical devices. Among them, software metric-based methodology has been considered for the digital I and C systems of Korean nuclear power plants. Advantages and limitations of that methodology are identified and requirements for its application to the digital I and C systems are considered in this study

  17. A Novel Coupling Pattern in Computational Science and Engineering Software

    Science.gov (United States)

    Computational science and engineering (CSE) software is written by experts of certain area(s). Due to the specialization,existing CSE software may need to integrate other CSE software systems developed by different groups of experts. Thecoupling problem is one of the challenges f...

  18. A Novel Coupling Pattern in Computational Science and Engineering Software

    Science.gov (United States)

    Computational science and engineering (CSE) software is written by experts of certain area(s). Due to the specialization, existing CSE software may need to integrate other CSE software systems developed by different groups of experts. The coupling problem is one of the challenges...

  19. The 7 C's for Creating Living Software: A Research Perspective for Quality-Oriented Software Engineering

    NARCIS (Netherlands)

    Aksit, Mehmet

    2004-01-01

    This article proposes the 7 C's for realizing quality-oriented software engineering practices. All the desired qualities of this approach are expressed in short by the term living software. The 7 C's are: Concern-oriented processes, Canonical models, Composable models, Certifiable models,

  20. Blockchain-oriented Software Engineering: Challenges and New Directions

    OpenAIRE

    Porru, Simone; Pinna, Andrea; Marchesi, Michele; Tonelli, Roberto

    2017-01-01

    The Blockchain technology is reshaping finance, economy, money to the extent that its disruptive power is compared to that of the Internet and the Web in their early days. As a result, all the software development revolving around the Blockchain technology is growing at a staggering rate. In this paper, we acknowledge the need for software engineers to devise specialized tools and techniques for blockchain-oriented software development. From current challenges concerning the definition of new...

  1. SPEM: Software Process Engineering Metamodel

    Directory of Open Access Journals (Sweden)

    Víctor Hugo Menéndez Domínguez

    2015-05-01

    Full Text Available Todas las organizaciones involucradas en el desarrollo de software necesitan establecer, gestionar y soportar el trabajo de desarrollo. El término “proceso de desarrollo de software” tiende a unificar todas las actividades y prácticas que cubren esas necesidades. Modelar el proceso de software es una forma para mejorar el desarrollo y la calidad de las aplicaciones resultantes. De entre todos los lenguajes existentes para el modelado de procesos, aquellos basados en productos de trabajo son los más adecuados. Uno de tales lenguajes es SPEM (Software Process Engineering Metamodel. SPEM fue creado por OMG (Object Management Group como un estándar de alto nivel, que está basado en MOF (MetaObject Facility y es un metamodelo UML (Uniform Model Language. Constituye un tipo de ontología de procesos de desarrollo de software. En este artículo se ofrece una descripción, en términos generales, del estándar SPEM. También se destacan los cambios que ha experimentado entre la versión 1.1 y la versión 2.0, presentando tanto las ventajas como las desventajas encontradas entre ambas versiones.

  2. Software agent Technology: A Framework for Minimizing Fraud in ...

    African Journals Online (AJOL)

    Software agent Technology: A Framework for Minimizing Fraud in Postpaid Billing Systems. ... Journal of Research in National Development ... to the traditional Object-oriented Software engineering methodology was used to come up with this ...

  3. The School Advanced Ventilation Engineering Software (SAVES)

    Science.gov (United States)

    The School Advanced Ventilation Engineering Software (SAVES) package is a tool to help school designers assess the potential financial payback and indoor humidity control benefits of Energy Recovery Ventilation (ERV) systems for school applications.

  4. The software-cycle model for re-engineering and reuse

    Science.gov (United States)

    Bailey, John W.; Basili, Victor R.

    1992-01-01

    This paper reports on the progress of a study which will contribute to our ability to perform high-level, component-based programming by describing means to obtain useful components, methods for the configuration and integration of those components, and an underlying economic model of the costs and benefits associated with this approach to reuse. One goal of the study is to develop and demonstrate methods to recover reusable components from domain-specific software through a combination of tools, to perform the identification, extraction, and re-engineering of components, and domain experts, to direct the applications of those tools. A second goal of the study is to enable the reuse of those components by identifying techniques for configuring and recombining the re-engineered software. This component-recovery or software-cycle model addresses not only the selection and re-engineering of components, but also their recombination into new programs. Once a model of reuse activities has been developed, the quantification of the costs and benefits of various reuse options will enable the development of an adaptable economic model of reuse, which is the principal goal of the overall study. This paper reports on the conception of the software-cycle model and on several supporting techniques of software recovery, measurement, and reuse which will lead to the development of the desired economic model.

  5. A Comparative Analysis of Software Engineering with Mature Engineering Disciplines Using a Problem-Solving Perspective

    NARCIS (Netherlands)

    Tekinerdogan, B.; Aksit, Mehmet; Dogru, Ali H.; Bicer, Veli

    2011-01-01

    Software engineering is compared with traditional engineering disciplines using a domain specific problem-solving model called Problem-Solving for Engineering Model (PSEM). The comparative analysis is performed both from a historical and contemporary view. The historical view provides lessons on the

  6. An Investigation of an Open-Source Software Development Environment in a Software Engineering Graduate Course

    Science.gov (United States)

    Ge, Xun; Huang, Kun; Dong, Yifei

    2010-01-01

    A semester-long ethnography study was carried out to investigate project-based learning in a graduate software engineering course through the implementation of an Open-Source Software Development (OSSD) learning environment, which featured authentic projects, learning community, cognitive apprenticeship, and technology affordances. The study…

  7. Assessing students' performance in software requirements engineering education using scoring rubrics

    Science.gov (United States)

    Mkpojiogu, Emmanuel O. C.; Hussain, Azham

    2017-10-01

    The study investigates how helpful the use of scoring rubrics is, in the performance assessment of software requirements engineering students and whether its use can lead to students' performance improvement in the development of software requirements artifacts and models. Scoring rubrics were used by two instructors to assess the cognitive performance of a student in the design and development of software requirements artifacts. The study results indicate that the use of scoring rubrics is very helpful in objectively assessing the performance of software requirements or software engineering students. Furthermore, the results revealed that the use of scoring rubrics can also produce a good achievement assessments direction showing whether a student is either improving or not in a repeated or iterative assessment. In a nutshell, its use leads to the performance improvement of students. The results provided some insights for further investigation and will be beneficial to researchers, requirements engineers, system designers, developers and project managers.

  8. A handbook of software and systems engineering empirical observations, laws and theories

    CERN Document Server

    Endres, Albert

    2003-01-01

    This book is intended as a handbook for students and practitioners alike. The book is structured around the type of tasks that practitioners are confronted with, beginning with requirements definition and concluding with maintenance and withdrawal. It identifies and discusses existing laws that have a significant impact on the software engineering field. These laws are largely independent of the technologies involved, which allow students to learn the principles underlying software engineering. This also guides students toward the best practice when implementing software engineering techniques.

  9. Software engineering and Ada (Trademark) training: An implementation model for NASA

    Science.gov (United States)

    Legrand, Sue; Freedman, Glenn

    1988-01-01

    The choice of Ada for software engineering for projects such as the Space Station has resulted in government and industrial groups considering training programs that help workers become familiar with both a software culture and the intricacies of a new computer language. The questions of how much time it takes to learn software engineering with Ada, how much an organization should invest in such training, and how the training should be structured are considered. Software engineering is an emerging, dynamic discipline. It is defined by the author as the establishment and application of sound engineering environments, tools, methods, models, principles, and concepts combined with appropriate standards, guidelines, and practices to support computing which is correct, modifiable, reliable and safe, efficient, and understandable throughout the life cycle of the application. Neither the training programs needed, nor the content of such programs, have been well established. This study addresses the requirements for training for NASA personnel and recommends an implementation plan. A curriculum and a means of delivery are recommended. It is further suggested that a knowledgeable programmer may be able to learn Ada in 5 days, but that it takes 6 to 9 months to evolve into a software engineer who uses the language correctly and effectively. The curriculum and implementation plan can be adapted for each NASA Center according to the needs dictated by each project.

  10. Software Process Improvement through the Removal of Project-Level Knowledge Flow Obstacles: The Perceptions of Software Engineers

    Science.gov (United States)

    Mitchell, Susan Marie

    2012-01-01

    Uncontrollable costs, schedule overruns, and poor end product quality continue to plague the software engineering field. Innovations formulated with the expectation to minimize or eliminate cost, schedule, and quality problems have generally fallen into one of three categories: programming paradigms, software tools, and software process…

  11. Crisis management for software development and knowledge transfer

    CERN Document Server

    Zykov, Sergey V

    2016-01-01

    This well structured book discusses lifecycle optimization of software projects for crisis management by means of software engineering methods and tools. Its outcomes are based on lessons learned from the software engineering crisis which started in the 1960s. The book presents a systematic approach to overcome the crisis in software engineering depends which not only depends on technology-related but also on human-related factors. It proposes an adaptive methodology for software product development, which optimizes the software product lifecycle in order to avoid “local” crises of software production. The general lifecycle pattern and its stages are discussed, and their impact on the time and budget of the software product development is analyzed. The book identifies key advantages and disadvantages for various models selected and concludes that there is no “silver bullet”, or universal model, which suits all software products equally well. It approaches software architecture in terms of process, dat...

  12. Why Software Engineers are Reluctant to Use Structures Methods ...

    African Journals Online (AJOL)

    This paper looks into the reasons for an apparent boycott of theoretically proven structured techniques and methodologies by most developers. It begins by discussing the fact that when a methodology for developing software contradicts with the way human brains solves problems, the result is stress and thence burnout to ...

  13. State of the Art : Integrated Management of Requirements in Model-Based Software Engineering

    OpenAIRE

    Thörn, Christer

    2006-01-01

    This report describes the background and future of research concerning integrated management of requirements in model-based software engineering. The focus is on describing the relevant topics and existing theoretical backgrounds that form the basis for the research. The report describes the fundamental difficulties of requirements engineering for software projects, and proposes that the results and methods of models in software engineering can help leverage those problems. Taking inspiration...

  14. An engineering methodology for fracture analyses of tough materials

    International Nuclear Information System (INIS)

    Shih, C.F.

    1981-01-01

    The paper summarizes progress made in two research programs sponsored by the Electric Power Research Institute (EPRI), to identify viable parameters for characterizing crack inititation and continued extension, and to develop an engineering/design methodology, based on these parameters, for the assessment of crack growth and instability in engineering structures which are stressed beyond the regime of applicability of linear elastic fracture mechanics. The ultimate goal in the development of such a methodology is to establish a rational basis for analyzing the effect of flaws (postulated or detected) on the safety margins of pressure boundary components of light water-cooled type nuclear steam supply systems. The methodology can also be employed for structural integrity analyses of other engineering structures. (Auth.)

  15. Envisioning the future of collaborative model-driven software engineering

    NARCIS (Netherlands)

    Di Ruscio, Davide; Franzago, Mirco; Malavolta, Ivano; Muccini, Henry

    2017-01-01

    The adoption of Model-driven Software Engineering (MDSE) to develop complex software systems in application domains like automotive and aerospace is being supported by the maturation of model-driven platforms and tools. However, empirical studies show that a wider adoption of MDSE technologies is

  16. Practical support for Lean Six Sigma software process definition using IEEE software engineering standards

    CERN Document Server

    Land, Susan K; Walz, John W

    2012-01-01

    Practical Support for Lean Six Sigma Software Process Definition: Using IEEE Software Engineering Standards addresses the task of meeting the specific documentation requirements in support of Lean Six Sigma. This book provides a set of templates supporting the documentation required for basic software project control and management and covers the integration of these templates for their entire product development life cycle. Find detailed documentation guidance in the form of organizational policy descriptions, integrated set of deployable document templates, artifacts required in suppo

  17. Selecting a software development methodology. [of digital flight control systems

    Science.gov (United States)

    Jones, R. E.

    1981-01-01

    The state of the art analytical techniques for the development and verification of digital flight control software is studied and a practical designer oriented development and verification methodology is produced. The effectiveness of the analytic techniques chosen for the development and verification methodology are assessed both technically and financially. Technical assessments analyze the error preventing and detecting capabilities of the chosen technique in all of the pertinent software development phases. Financial assessments describe the cost impact of using the techniques, specifically, the cost of implementing and applying the techniques as well as the relizable cost savings. Both the technical and financial assessment are quantitative where possible. In the case of techniques which cannot be quantitatively assessed, qualitative judgements are expressed about the effectiveness and cost of the techniques. The reasons why quantitative assessments are not possible will be documented.

  18. Development of an engine system simulation software package - ESIM

    Energy Technology Data Exchange (ETDEWEB)

    Erlandsson, Olof

    2000-10-01

    A software package, ESIM is developed for simulating internal combustion engine systems, including models for engine, manifolds, turbocharger, charge-air cooler (inter cooler) and inlet air heater. This study focus on the thermodynamic treatment and methods used in the models. It also includes some examples of system simulations made with these models for validation purposes. The engine model can be classified as a zero-dimensional, single zone model. It includes calculation of the valve flow process, models for heat release and models for in-cylinder, exhaust port and manifold heat transfer. Models are developed for handling turbocharger performance and charge air cooler characteristics. The main purpose of the project related to this work is to use the ESIM software to study heat balance and performance of homogeneous charge compression ignition (HCCI) engine systems. A short description of the HCCI engine is therefore included, pointing out the difficulties, or challenges regarding the HCCI engine, from a system perspective. However, the relations given here, and the code itself, is quite general, making it possible to use these models to simulate spark ignited, as well as direct injected engines.

  19. Property-Based Software Engineering Measurement

    Science.gov (United States)

    Briand, Lionel C.; Morasca, Sandro; Basili, Victor R.

    1997-01-01

    Little theory exists in the field of software system measurement. Concepts such as complexity, coupling, cohesion or even size are very often subject to interpretation and appear to have inconsistent definitions in the literature. As a consequence, there is little guidance provided to the analyst attempting to define proper measures for specific problems. Many controversies in the literature are simply misunderstandings and stem from the fact that some people talk about different measurement concepts under the same label (complexity is the most common case). There is a need to define unambiguously the most important measurement concepts used in the measurement of software products. One way of doing so is to define precisely what mathematical properties characterize these concepts, regardless of the specific software artifacts to which these concepts are applied. Such a mathematical framework could generate a consensus in the software engineering community and provide a means for better communication among researchers, better guidelines for analysts, and better evaluation methods for commercial static analyzers for practitioners. In this paper, we propose a mathematical framework which is generic, because it is not specific to any particular software artifact and rigorous, because it is based on precise mathematical concepts. We use this framework to propose definitions of several important measurement concepts (size, length, complexity, cohesion, coupling). It does not intend to be complete or fully objective; other frameworks could have been proposed and different choices could have been made. However, we believe that the formalisms and properties we introduce are convenient and intuitive. This framework contributes constructively to a firmer theoretical ground of software measurement.

  20. Quality of Design, Analysis and Reporting of Software Engineering Experiments:A Systematic Review

    OpenAIRE

    By Kampenes, Vigdis

    2007-01-01

    Background: Like any research discipline, software engineering research must be of a certain quality to be valuable. High quality research in software engineering ensures that knowledge is accumulated and helpful advice is given to the industry. One way of assessing research quality is to conduct systematic reviews of the published research literature. Objective: The purpose of this work was to assess the quality of published experiments in software engineering with respect to the validit...

  1. The Ethics of Software Engineering should be an Ethics for the Client

    OpenAIRE

    McBride, Neil

    2012-01-01

    The developing nature of software engineering requires not a revision of an ailing code but a revolution in ethical thinking that acknowledges the purpose and practice of software engineering. Computer systems are designed and implemented to support human purposeful activity. Whether the software is concerned with student enrollment, customer relationship management, or hospital administration, its success lies in the extent to which it enables others to en...

  2. Software Engineering and Knowledge Engineering Theory and Practice Volume 2

    CERN Document Server

    2012-01-01

    The volume includes a set of selected papers extended and revised from the I2009 Pacific-Asia Conference on Knowledge Engineering and Software Engineering (KESE 2009) was held on December 19~ 20, 2009, Shenzhen, China.   Volume 2 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of Knowledge Engineering and Communication Technology to disseminate their latest research results and exchange views on the future research directions of these fields. 135 high-quality papers are included in the volume. Each paper has been peer-reviewed by at least 2 program committee members and selected by the volume editor Prof.Yanwen Wu.   On behalf of the this volume, we would like to express our sincere appreciation to all of authors and referees for their efforts reviewing the papers. Hoping you can find lots of profound research ideas and results on the related fields of Knowledge Engineering and Communication Technology. 

  3. Experiences on dynamic simulation software in chemical engineering education

    DEFF Research Database (Denmark)

    Komulainen, Tiina M.; Enemark-rasmussen, Rasmus; Sin, Gürkan

    2012-01-01

    Commercial process simulators are increasing interest in the chemical engineer education. In this paper, the use of commercial dynamic simulation software, D-SPICE® and K-Spice®, for three different chemical engineering courses is described and discussed. The courses cover the following topics...

  4. Bringing Model Checking Closer to Practical Software Engineering

    CERN Document Server

    AUTHOR|(CDS)2079681; Templon, J A; Willemse, T.A.C.

    Software grows in size and complexity, making it increasingly challenging to ensure that it behaves correctly. This is especially true for distributed systems, where a multitude of components are running concurrently, making it dicult to anticipate all the possible behaviors emerging in the system as a whole. Certain design errors, such as deadlocks and race-conditions, can often go unnoticed when testing is the only form of verication employed in the software engineering life-cycle. Even when bugs are detected in a running software, revealing the root cause and reproducing the behavior can be time consuming (and even impossible), given the lack of control the engineer has over the execution of the concurrent components, as well as the number of possible scenarios that could have produced the problem. This is especially pronounced for large-scale distributed systems such as the Worldwide Large Hadron Collider Computing Grid. Formal verication methods oer more rigorous means of determining whether a system sat...

  5. Questioning the Role of Requirements Engineering in the Causes of Safety-Critical Software Failures

    Science.gov (United States)

    Johnson, C. W.; Holloway, C. M.

    2006-01-01

    Many software failures stem from inadequate requirements engineering. This view has been supported both by detailed accident investigations and by a number of empirical studies; however, such investigations can be misleading. It is often difficult to distinguish between failures in requirements engineering and problems elsewhere in the software development lifecycle. Further pitfalls arise from the assumption that inadequate requirements engineering is a cause of all software related accidents for which the system fails to meet its requirements. This paper identifies some of the problems that have arisen from an undue focus on the role of requirements engineering in the causes of major accidents. The intention is to provoke further debate within the emerging field of forensic software engineering.

  6. Software architecture and engineering for patient records: current and future.

    Science.gov (United States)

    Weng, Chunhua; Levine, Betty A; Mun, Seong K

    2009-05-01

    During the "The National Forum on the Future of the Defense Health Information System," a track focusing on "Systems Architecture and Software Engineering" included eight presenters. These presenters identified three key areas of interest in this field, which include the need for open enterprise architecture and a federated database design, net centrality based on service-oriented architecture, and the need for focus on software usability and reusability. The eight panelists provided recommendations related to the suitability of service-oriented architecture and the enabling technologies of grid computing and Web 2.0 for building health services research centers and federated data warehouses to facilitate large-scale collaborative health care and research. Finally, they discussed the need to leverage industry best practices for software engineering to facilitate rapid software development, testing, and deployment.

  7. Automated ECU software tests on hardware-in-the-loop test benches; Automatisierte ECU-Software-Tests an Hardware-in-the-Loop-Pruefstaenden

    Energy Technology Data Exchange (ETDEWEB)

    Voegl, R. [AVL List GmbH, Graz (Austria). Abteilung Kalibrierung Ottomotoren; Duerager, Ch. [AVL List GmbH, Graz (Austria). Abteilung Kalibriermethodik; Beer, W.; Martini, E. [AVL List GmbH, Graz (Austria)

    2005-08-01

    Due to the continuous increase in complexity of engine application, AVL List decided to develop methods for automated ECU software commissioning on HiL test benches. This required the intensive co-operation of the departments for calibration methodology, calibration and electrical/electronic engineering. The result is a practical orientated collection of methods that significantly increase the test coverage for a new software version without extending the commissioning time. (orig.)

  8. Proposing an Evidence-Based Strategy for Software Requirements Engineering.

    Science.gov (United States)

    Lindoerfer, Doris; Mansmann, Ulrich

    2016-01-01

    This paper discusses an evidence-based approach to software requirements engineering. The approach is called evidence-based, since it uses publications on the specific problem as a surrogate for stakeholder interests, to formulate risks and testing experiences. This complements the idea that agile software development models are more relevant, in which requirements and solutions evolve through collaboration between self-organizing cross-functional teams. The strategy is exemplified and applied to the development of a Software Requirements list used to develop software systems for patient registries.

  9. Methodology for Developing the REScheckTM Software through Version 4.2

    Energy Technology Data Exchange (ETDEWEB)

    Bartlett, Rosemarie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Connell, Linda M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gowri, Krishnan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lucas, R. G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Schultz, Robert W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wiberg, John D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2009-08-01

    This report explains the methodology used to develop Version 4.2 of the REScheck software developed for the 1992, 1993, and 1995 editions of the MEC, and the 1998, 2000, 2003, and 2006 editions of the IECC, and the 2006 edition of the International Residential Code (IRC). Although some requirements contained in these codes have changed, the methodology used to develop the REScheck software for these five editions is similar. REScheck assists builders in meeting the most complicated part of the code-the building envelope Uo-, U-, and R-value requirements in Section 502 of the code. This document details the calculations and assumptions underlying the treatment of the code requirements in REScheck, with a major emphasis on the building envelope requirements.

  10. Requirements Engineering for Software Integrity and Safety

    Science.gov (United States)

    Leveson, Nancy G.

    2002-01-01

    Requirements flaws are the most common cause of errors and software-related accidents in operational software. Most aerospace firms list requirements as one of their most important outstanding software development problems and all of the recent, NASA spacecraft losses related to software (including the highly publicized Mars Program failures) can be traced to requirements flaws. In light of these facts, it is surprising that relatively little research is devoted to requirements in contrast with other software engineering topics. The research proposed built on our previous work. including both criteria for determining whether a requirements specification is acceptably complete and a new approach to structuring system specifications called Intent Specifications. This grant was to fund basic research on how these ideas could be extended to leverage innovative approaches to the problems of (1) reducing the impact of changing requirements, (2) finding requirements specification flaws early through formal and informal analysis, and (3) avoiding common flaws entirely through appropriate requirements specification language design.

  11. The Application of V&V within Reuse-Based Software Engineering

    Science.gov (United States)

    Addy, Edward

    1996-01-01

    Verification and Validation (V&V) is performed during application development for many systems, especially safety-critical and mission-critical systems. The V&V process is intended to discover errors as early as possible during the development process. Early discovery is important in order to minimize the cost and other impacts of correcting these errors. In reuse-based software engineering, decisions on the requirements, design and even implementation of domain assets can can be made prior to beginning development of a specific system. in order to bring the effectiveness of V&V to bear within reuse-based software engineering. V&V must be incorporated within the domain engineering process.

  12. 10th ACIS International Conference on Software Engineering Research, Management and Applications (SERA 2012)

    CERN Document Server

    Software Engineering Research, Management and Applications 2012

    2012-01-01

    The series Studies in Computational Intelligence (SCI) publishes new developments and advances in the various areas of computational intelligence-quickly and with a high quality.  The intent is to cover the theory, applications, and design methods of computational intelligence, as embedded in the fields of engineering, computer science, physics and life science, as well as the methodologies behind them.  The series contains monographs, lecture notes and edited volumes in computational intelligence spanning the areas of neural networks, connectionist systems, genetic algorithms, evolutionary computation, artificial intelligence, cellular automata, self-organizing systems, soft computing, fuzzy systems and hybrid intelligent systems. Critical to both contributors and readers are the short publication time and world-wide distribution-this permits a rapid and broad dissemination of research results.  The purpose of the 10th International Conference on Software Engineering Research, Management and Applications(...

  13. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1 : ASC software quality engineering practices version 1.0.

    Energy Technology Data Exchange (ETDEWEB)

    Minana, Molly A.; Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2005-01-01

    The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in DOE/AL Quality Criteria (QC-1) as conformance to customer requirements and expectations. This quality plan defines the ASC program software quality practices and provides mappings of these practices to the SNL Corporate Process Requirements (CPR 1.3.2 and CPR 1.3.6) and the Department of Energy (DOE) document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines (GP&G). This quality plan identifies ASC management and software project teams' responsibilities for cost-effective software engineering quality practices. The SNL ASC Software Quality Plan establishes the signatories commitment to improving software products by applying cost-effective software engineering quality practices. This document explains the project teams opportunities for tailoring and implementing the practices; enumerates the practices that compose the development of SNL ASC's software products; and includes a sample assessment checklist that was developed based upon the practices in this document.

  14. The Impact of Software on Associate Degree Programs in Electronic Engineering Technology.

    Science.gov (United States)

    Hata, David M.

    1986-01-01

    Assesses the range and extent of computer assisted instruction software available in electronic engineering technology education. Examines the need for software skills in four areas: (1) high-level languages; (2) assembly language; (3) computer-aided engineering; and (4) computer-aided instruction. Outlines strategies for the future in three…

  15. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan : ASC software quality engineering practices Version 3.0.

    Energy Technology Data Exchange (ETDEWEB)

    Turgeon, Jennifer L.; Minana, Molly A.; Hackney, Patricia; Pilch, Martin M.

    2009-01-01

    The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in the US Department of Energy/National Nuclear Security Agency (DOE/NNSA) Quality Criteria, Revision 10 (QC-1) as 'conformance to customer requirements and expectations'. This quality plan defines the SNL ASC Program software quality engineering (SQE) practices and provides a mapping of these practices to the SNL Corporate Process Requirement (CPR) 001.3.6; 'Corporate Software Engineering Excellence'. This plan also identifies ASC management's and the software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals. This SNL ASC Software Quality Plan establishes the signatories commitments to improving software products by applying cost-effective SQE practices. This plan enumerates the SQE practices that comprise the development of SNL ASC's software products and explains the project teams opportunities for tailoring and implementing the practices.

  16. What's Happening in the Software Engineering Laboratory?

    Science.gov (United States)

    Pajerski, Rose; Green, Scott; Smith, Donald

    1995-01-01

    Since 1976 the Software Engineering Laboratory (SEL) has been dedicated to understanding and improving the way in which one NASA organization the Flight Dynamics Division (FDD) at Goddard Space Flight Center, develops, maintains, and manages complex flight dynamics systems. This paper presents an overview of recent activities and studies in SEL, using as a framework the SEL's organizational goals and experience based software improvement approach. It focuses on two SEL experience areas : (1) the evolution of the measurement program and (2) an analysis of three generations of Cleanroom experiments.

  17. A Proven Methodology for Developing Secure Software and Applying It to Ground Systems

    Science.gov (United States)

    Bailey, Brandon

    2016-01-01

    Part Two expands upon Part One in an attempt to translate the methodology for ground system personnel. The goal is to build upon the methodology presented in Part One by showing examples and details on how to implement the methodology. Section 1: Ground Systems Overview; Section 2: Secure Software Development; Section 3: Defense in Depth for Ground Systems; Section 4: What Now?

  18. Component-Based Software Engineering and Runtime Type Definition

    OpenAIRE

    A. R. Shakurov

    2011-01-01

    The component-based approach to software engineering, its current implementations and their limitations are discussed. A new extended architecture for such systems is presented. Its main architectural concepts and principles are considered.

  19. Proceedings International Workshop on Formal Engineering approaches to Software Components and Architectures

    OpenAIRE

    Kofroň, Jan; Tumova, Jana

    2017-01-01

    These are the proceedings of the 14th International Workshop on Formal Engineering approaches to Software Components and Architectures (FESCA). The workshop was held on April 22, 2017 in Uppsala (Sweden) as a satellite event to the European Joint Conference on Theory and Practice of Software (ETAPS'17). The aim of the FESCA workshop is to bring together junior researchers from formal methods, software engineering, and industry interested in the development and application of formal modelling ...

  20. Requirements engineering for trust management: Model, methodology, and reasoning

    NARCIS (Netherlands)

    Giorgini, P.; Massacci, F.; Mylopoulos, J.; Zannone, N.

    2006-01-01

    A number of recent proposals aim to incorporate security engineering into mainstream software engineering. Yet, capturing trust and security requirements at an organizational level, as opposed to an IT system level, and mapping these into security and trust management policies is still an open

  1. Interactive scalable condensation of reverse engineered UML class diagrams for software comprehension

    NARCIS (Netherlands)

    Osman, Mohd Hafeez Bin

    2015-01-01

    Software design documentation is a valuable aid in software comprehension. However, keeping the software design up-to-date with evolving source code is challenging and time-consuming. Reverse engineering is one of the options for recovering software architecture from the implementation code.

  2. Success Factors for Using Case Method in Teaching and Learning Software Engineering

    Science.gov (United States)

    Razali, Rozilawati; Zainal, Dzulaiha Aryanee Putri

    2013-01-01

    The Case Method (CM) has long been used effectively in Social Science education. Its potential use in Applied Science such as Software Engineering (SE) however has yet to be further explored. SE is an engineering discipline that concerns the principles, methods and tools used throughout the software development lifecycle. In CM, subjects are…

  3. Security requirements engineering : the SI* modeling language and the Secure Tropos methodology

    NARCIS (Netherlands)

    Massacci, F.; Mylopoulos, J.; Zannone, N.; Ras, Z.W.; Tsay, L.-S.

    2010-01-01

    Security Requirements Engineering is an emerging field which lies at the crossroads of Security and Software Engineering. Much research has focused on this field in recent years, spurred by the realization that security must be dealt with in the earliest phases of the software development process as

  4. Software Engineering Laboratory (SEL) data base reporting software user's guide and system description. Volume 1: Introduction and user's guide

    Science.gov (United States)

    1983-01-01

    Reporting software programs provide formatted listings and summary reports of the Software Engineering Laboratory (SEL) data base contents. The operating procedures and system information for 18 different reporting software programs are described. Sample output reports from each program are provided.

  5. An ontological case base engineering methodology for diabetes management.

    Science.gov (United States)

    El-Sappagh, Shaker H; El-Masri, Samir; Elmogy, Mohammed; Riad, A M; Saddik, Basema

    2014-08-01

    Ontology engineering covers issues related to ontology development and use. In Case Based Reasoning (CBR) system, ontology plays two main roles; the first as case base and the second as domain ontology. However, the ontology engineering literature does not provide adequate guidance on how to build, evaluate, and maintain ontologies. This paper proposes an ontology engineering methodology to generate case bases in the medical domain. It mainly focuses on the research of case representation in the form of ontology to support the case semantic retrieval and enhance all knowledge intensive CBR processes. A case study on diabetes diagnosis case base will be provided to evaluate the proposed methodology.

  6. Human aspects, gamification, and social media in collaborative software engineering

    NARCIS (Netherlands)

    Vasilescu, B.N.

    2014-01-01

    Software engineering is inherently a collaborative venture. In open-source software (OSS) development, such collaborations almost always span geographies and cultures. Because of the decentralised and self-directed nature of OSS as well as the social diversity inherent to OSS communities, the

  7. Software engineering technology innovation: Turning research results into industrial success

    NARCIS (Netherlands)

    Punter, H.T.; Krikhaar, R.L.; Bril, R.J.

    2009-01-01

    This paper deals with the innovation of software engineering technologies. These technologies are methods and tools for conducting software development and maintenance. We consider innovation as a process consisting of two phases, being technology creation and technology transfer. In this paper, we

  8. Systematic development of industrial control systems using Software/Hardware Engineering

    NARCIS (Netherlands)

    Voeten, J.P.M.; van der Putten, P.H.A.; Stevens, M.P.J.; Milligan, P.; Corr, P.

    1997-01-01

    SHE (Software/Hardware Engineering) is a new object-oriented analysis, specification and design method for complex reactive hardware/software systems. SHE is based on the formal specification language POOSL and a design framework guiding analysis and design activities. This paper reports on the

  9. Software engineering technology innovation - Turning research results into industrial success

    NARCIS (Netherlands)

    Punter, T.; Krikhaar, R.L.; Bril, R.J.

    2009-01-01

    This paper deals with the innovation of software engineering technologies. These technologies are methods and tools for conducting software development and maintenance. We consider innovation as a process consisting of two phases, being technology creation and technology transfer. In this paper, we

  10. Software engineering for the EBR-II data acquisition system conversion

    International Nuclear Information System (INIS)

    Schorzman, W.

    1988-01-01

    The original data acquisition system (DAS) for the Experimental Breeder Reactor II (EBR-II) was placed into service with state-of-the-art computer and peripherals in 1970. Software engineering principles for real-time data acquisition were in their infancy, and the original software design was dictated by limited hardware resources. The functional requirements evolved from creative ways to gather and display data. This abstract concept developed into an invaluable tool for system analysis, data reporting, and as a plant monitor for operations. In this paper the approach is outlined to the software conversion project with the restraints of operational transparency and 6 weeks for final conversion and testing. The outline is then compared with the formal principles of software engineering to show the way that bridge the gap can be bridged between the theoretical and real world by analyzing the work and listing the lessons learned

  11. Software Component Clustering and Retrieval: An Entropy-based Fuzzy k-Modes Methodology

    OpenAIRE

    Stylianou, Constantinos; Andreou, Andreas S.

    2008-01-01

    The number of software houses attempting to adopt a component-based development approach is rapidly increasing. However many organisations still find it difficult to complete the shift as it requires them to alter their entire software development process and philosophy. Furthermore, to promote component-based software engineering, organisations must be ready to promote reusability and this can only be attained if the proper framework exists from which a developer can access, search and retri...

  12. SAGA: A project to automate the management of software production systems

    Science.gov (United States)

    Campbell, Roy H.; Laliberte, D.; Render, H.; Sum, R.; Smith, W.; Terwilliger, R.

    1987-01-01

    The Software Automation, Generation and Administration (SAGA) project is investigating the design and construction of practical software engineering environments for developing and maintaining aerospace systems and applications software. The research includes the practical organization of the software lifecycle, configuration management, software requirements specifications, executable specifications, design methodologies, programming, verification, validation and testing, version control, maintenance, the reuse of software, software libraries, documentation, and automated management.

  13. The Need for V&V in Reuse-Based Software Engineering

    Science.gov (United States)

    Addy, Edward A.

    1997-01-01

    V&V is currently performed during application development for many systems, especially safety-critical and mission-critical systems. The V&V process is intended to discover errors, especially errors related to entire' domain or product line rather than a critical processing, as early as possible during the development process. The system application provides the context under which the software artifacts are validated. engineering. This paper describes a framework that extends V&V from an individual application system to a product line of systems that are developed within an architecture-based software engineering environment. This framework includes the activities of traditional application-level V&V, and extends these activities into the transition between domain engineering and application engineering. The framework includes descriptions of the types of activities to be performed during each of the life-cycle phases, and provides motivation for activities.

  14. Towards a mature measurement environment: Creating a software engineering research environment

    Science.gov (United States)

    Basili, Victor R.

    1990-01-01

    Software engineering researchers are building tools, defining methods, and models; however, there are problems with the nature and style of the research. The research is typically bottom-up, done in isolation so the pieces cannot be easily logically or physically integrated. A great deal of the research is essentially the packaging of a particular piece of technology with little indication of how the work would be integrated with other prices of research. The research is not aimed at solving the real problems of software engineering, i.e., the development and maintenance of quality systems in a productive manner. The research results are not evaluated or analyzed via experimentation or refined and tailored to the application environment. Thus, it cannot be easily transferred into practice. Because of these limitations we have not been able to understand the components of the discipline as a coherent whole and the relationships between various models of the process and product. What is needed is a top down experimental, evolutionary framework in which research can be focused, logically and physically integrated to produce quality software productively, and evaluated and tailored to the application environment. This implies the need for experimentation, which in turn implies the need for a laboratory that is associated with the artifact we are studying. This laboratory can only exist in an environment where software is being built, i.e., as part of a real software development and maintenance organization. Thus, we propose that Software Engineering Laboratory (SEL) type activities exist in all organizations to support software engineering research. We describe the SEL from a researcher's point of view, and discuss the corporate and government benefits of the SEL. The discussion focuses on the benefits to the research community.

  15. Increasing the reliability of ecological models using modern software engineering techniques

    Science.gov (United States)

    Robert M. Scheller; Brian R. Sturtevant; Eric J. Gustafson; Brendan C. Ward; David J. Mladenoff

    2009-01-01

    Modern software development techniques are largely unknown to ecologists. Typically, ecological models and other software tools are developed for limited research purposes, and additional capabilities are added later, usually in an ad hoc manner. Modern software engineering techniques can substantially increase scientific rigor and confidence in ecological models and...

  16. RICIS Software Engineering 90 Symposium: Aerospace Applications and Research Directions Proceedings

    Science.gov (United States)

    1990-01-01

    Papers presented at RICIS Software Engineering Symposium are compiled. The following subject areas are covered: synthesis - integrating product and process; Serpent - a user interface management system; prototyping distributed simulation networks; and software reuse.

  17. RICIS Software Engineering 90 Symposium: Aerospace Applications and Research Directions Proceedings Appendices

    Science.gov (United States)

    1990-01-01

    Papers presented at RICIS Software Engineering Symposium are compiled. The following subject areas are covered: flight critical software; management of real-time Ada; software reuse; megaprogramming software; Ada net; POSIX and Ada integration in the Space Station Freedom Program; and assessment of formal methods for trustworthy computer systems.

  18. Combining Capability Assessment and Value Engineering: a New Two-dimensional Method for Software Process Improvement

    Directory of Open Access Journals (Sweden)

    Pasi Ojala

    2008-02-01

    Full Text Available During the last decades software process improvement (SPI has been recognized as a usable possibility to increase the quality of software development. Implemented SPI investments have often indicated increased process capabilities as well. Recently more attention has been focused on the costs of SPI as well as on the cost-effectiveness and productivity of software development, although the roots of economic-driven software engineering originate from the very early days of software engineering research. This research combines Value Engineering and capability assessment into usable new method in order to better respond to the challenges that cost-effectiveness and productivity has brought to software companies. This is done in part by defining the concepts of value, worth and cost and in part by defining the Value Engineering process and different enhancements it has seen to offer to software assessment. The practical industrial cases show that proposed two-dimensional method works in practise and is useful to assessed companies.

  19. An engineering methodology for implementing and testing VLSI (Very Large Scale Integrated) circuits

    Science.gov (United States)

    Corliss, Walter F., II

    1989-03-01

    The engineering methodology for producing a fully tested VLSI chip from a design layout is presented. A 16-bit correlator, NPS CORN88, that was previously designed, was used as a vehicle to demonstrate this methodology. The study of the design and simulation tools, MAGIC and MOSSIM II, was the focus of the design and validation process. The design was then implemented and the chip was fabricated by MOSIS. This fabricated chip was then used to develop a testing methodology for using the digital test facilities at NPS. NPS CORN88 was the first full custom VLSI chip, designed at NPS, to be tested with the NPS digital analysis system, Tektronix DAS 9100 series tester. The capabilities and limitations of these test facilities are examined. NPS CORN88 test results are included to demonstrate the capabilities of the digital test system. A translator, MOS2DAS, was developed to convert the MOSSIM II simulation program to the input files required by the DAS 9100 device verification software, 91DVS. Finally, a tutorial for using the digital test facilities, including the DAS 9100 and associated support equipments, is included as an appendix.

  20. Capturing security requirements for software systems.

    Science.gov (United States)

    El-Hadary, Hassan; El-Kassas, Sherif

    2014-07-01

    Security is often an afterthought during software development. Realizing security early, especially in the requirement phase, is important so that security problems can be tackled early enough before going further in the process and avoid rework. A more effective approach for security requirement engineering is needed to provide a more systematic way for eliciting adequate security requirements. This paper proposes a methodology for security requirement elicitation based on problem frames. The methodology aims at early integration of security with software development. The main goal of the methodology is to assist developers elicit adequate security requirements in a more systematic way during the requirement engineering process. A security catalog, based on the problem frames, is constructed in order to help identifying security requirements with the aid of previous security knowledge. Abuse frames are used to model threats while security problem frames are used to model security requirements. We have made use of evaluation criteria to evaluate the resulting security requirements concentrating on conflicts identification among requirements. We have shown that more complete security requirements can be elicited by such methodology in addition to the assistance offered to developers to elicit security requirements in a more systematic way.

  1. Capturing security requirements for software systems

    Directory of Open Access Journals (Sweden)

    Hassan El-Hadary

    2014-07-01

    Full Text Available Security is often an afterthought during software development. Realizing security early, especially in the requirement phase, is important so that security problems can be tackled early enough before going further in the process and avoid rework. A more effective approach for security requirement engineering is needed to provide a more systematic way for eliciting adequate security requirements. This paper proposes a methodology for security requirement elicitation based on problem frames. The methodology aims at early integration of security with software development. The main goal of the methodology is to assist developers elicit adequate security requirements in a more systematic way during the requirement engineering process. A security catalog, based on the problem frames, is constructed in order to help identifying security requirements with the aid of previous security knowledge. Abuse frames are used to model threats while security problem frames are used to model security requirements. We have made use of evaluation criteria to evaluate the resulting security requirements concentrating on conflicts identification among requirements. We have shown that more complete security requirements can be elicited by such methodology in addition to the assistance offered to developers to elicit security requirements in a more systematic way.

  2. Capturing security requirements for software systems

    Science.gov (United States)

    El-Hadary, Hassan; El-Kassas, Sherif

    2014-01-01

    Security is often an afterthought during software development. Realizing security early, especially in the requirement phase, is important so that security problems can be tackled early enough before going further in the process and avoid rework. A more effective approach for security requirement engineering is needed to provide a more systematic way for eliciting adequate security requirements. This paper proposes a methodology for security requirement elicitation based on problem frames. The methodology aims at early integration of security with software development. The main goal of the methodology is to assist developers elicit adequate security requirements in a more systematic way during the requirement engineering process. A security catalog, based on the problem frames, is constructed in order to help identifying security requirements with the aid of previous security knowledge. Abuse frames are used to model threats while security problem frames are used to model security requirements. We have made use of evaluation criteria to evaluate the resulting security requirements concentrating on conflicts identification among requirements. We have shown that more complete security requirements can be elicited by such methodology in addition to the assistance offered to developers to elicit security requirements in a more systematic way. PMID:25685514

  3. The importance of training in formal methods in Software Engineering

    Directory of Open Access Journals (Sweden)

    John Polansky

    2014-12-01

    Full Text Available The paradigm of formal methods provides systematic techniques and rigorous to software develop and, due the crescent complexity and quality requirements of current products, is necessary introduce them in curriculum of software engineer. In this article is analyzed the importance of train in formal methods and described specific techniques to achieved it efficiently. This techniques are the result of an experimental process in the class room of more than fifteen years in undergraduate and graduate programs, the same as company training. Also are presented a proposal a curriculum to systematic introduction of this paradigm and description of a program in training methods that has been success to industry. Results shows that students gain confidence in formal methods just when found out of the benefits of this in the context of software engineer.

  4. Imprinting Community College Computer Science Education with Software Engineering Principles

    Science.gov (United States)

    Hundley, Jacqueline Holliday

    2012-01-01

    Although the two-year curriculum guide includes coverage of all eight software engineering core topics, the computer science courses taught in Alabama community colleges limit student exposure to the programming, or coding, phase of the software development lifecycle and offer little experience in requirements analysis, design, testing, and…

  5. Agile Methodologies and Software Process Improvement Maturity Models, Current State of Practice in Small and Medium Enterprises

    OpenAIRE

    Koutsoumpos, Vasileios; Marinelarena, Iker

    2013-01-01

    Abstract—Background: Software Process Improvement (SPI) maturity models have been developed to assist organizations to enhance software quality. Agile methodologies are used to ensure productivity and quality of a software product. Amongst others they are applied in Small and Medium – sized Enterprises (SMEs). However, little is known about the combination of Agile methodologies and SPI maturity models regarding SMEs and the results that could emerge, as all the current SPI models are address...

  6. Active learning about research methodology in engineering education

    DEFF Research Database (Denmark)

    Lystbæk, Christian Tang

    Research methodology and theory of science have become important teaching subjects en engineering education as well as in higher education in general. This is rooted in the transition to a knowledge society. Today, it is argued by many that we are well on the way to an era beyond modernity...... of science if often not favored subjects by engineering students, who tend to find the subjects abstract. Thus, the students are often very engaged in the subjects, nor are textbooks or teaching very engaging. This poster asks how we can promote active learning in research methodology and theory of science...... and the sort of industrial economy that came with it. Whatever else the new era brings – the globalization of risks, environmental problems, new technologies, etc. – knowledge and the ability to seek, produce, apply and transform knowledge is of huge importance. However, research methodology and theory...

  7. A Brief Study of Software Engineering Professional Continuing Education in DoD Acquisition

    Science.gov (United States)

    2010-04-01

    Lifecycle Processes (IEEE 12207 ) (810) 37% 61% 2% Guide to the Software Engineering Body of K l d (SWEBOK) (804) 67% 31% 2% now e ge Software...Engineering-Software Measurement Process ( ISO /IEC 15939) (797) 55% 44% 2% Capability Maturity Model Integration (806) 17% 81% 2% Six Sigma Process...Improvement (804) 7% 91% 1% ISO 9000 Quality Management Systems (803) 10% 89% 1% 28 Conclusions Significant problem areas R i tequ remen s Management Very

  8. The evolution of CACSD tools-a software engineering perspective

    DEFF Research Database (Denmark)

    Ravn, Ole; Szymkat, Maciej

    1992-01-01

    The earlier evolution of computer-aided control system design (CACSD) tools is discussed from a software engineering perspective. A model of the design process is presented as the basis for principles and requirements of future CACSD tools. Combinability, interfacing in memory, and an open...... workspace are seen as important concepts in CACSD. Some points are made about the problem of buy or make when new software is required, and the idea of buy and make is put forward. Emphasis is put on the time perspective and the life cycle of the software...

  9. IMSF: Infinite Methodology Set Framework

    Science.gov (United States)

    Ota, Martin; Jelínek, Ivan

    Software development is usually an integration task in enterprise environment - few software applications work autonomously now. It is usually a collaboration of heterogeneous and unstable teams. One serious problem is lack of resources, a popular result being outsourcing, ‘body shopping’, and indirectly team and team member fluctuation. Outsourced sub-deliveries easily become black boxes with no clear development method used, which has a negative impact on supportability. Such environments then often face the problems of quality assurance and enterprise know-how management. The used methodology is one of the key factors. Each methodology was created as a generalization of a number of solved projects, and each methodology is thus more or less connected with a set of task types. When the task type is not suitable, it causes problems that usually result in an undocumented ad-hoc solution. This was the motivation behind formalizing a simple process for collaborative software engineering. Infinite Methodology Set Framework (IMSF) defines the ICT business process of adaptive use of methods for classified types of tasks. The article introduces IMSF and briefly comments its meta-model.

  10. Modeling a distributed environment for a petroleum reservoir engineering application with software product line

    International Nuclear Information System (INIS)

    Scheidt, Rafael de Faria; Vilain, Patrícia; Dantas, M A R

    2014-01-01

    Petroleum reservoir engineering is a complex and interesting field that requires large amount of computational facilities to achieve successful results. Usually, software environments for this field are developed without taking care out of possible interactions and extensibilities required by reservoir engineers. In this paper, we present a research work which it is characterized by the design and implementation based on a software product line model for a real distributed reservoir engineering environment. Experimental results indicate successfully the utilization of this approach for the design of distributed software architecture. In addition, all components from the proposal provided greater visibility of the organization and processes for the reservoir engineers

  11. Modeling a distributed environment for a petroleum reservoir engineering application with software product line

    Science.gov (United States)

    de Faria Scheidt, Rafael; Vilain, Patrícia; Dantas, M. A. R.

    2014-10-01

    Petroleum reservoir engineering is a complex and interesting field that requires large amount of computational facilities to achieve successful results. Usually, software environments for this field are developed without taking care out of possible interactions and extensibilities required by reservoir engineers. In this paper, we present a research work which it is characterized by the design and implementation based on a software product line model for a real distributed reservoir engineering environment. Experimental results indicate successfully the utilization of this approach for the design of distributed software architecture. In addition, all components from the proposal provided greater visibility of the organization and processes for the reservoir engineers.

  12. A Value-Based Business Approach to Product Line Software Engineering

    Directory of Open Access Journals (Sweden)

    Raman K. Agrawalla

    2009-08-01

    Full Text Available The present conceptual paper is an attempt to provide a Value-Based Business Approach (VBBA to product line software engineering. It argues that Product line software engineering should be seen as a system and considered as a means towards the end of appropriating more and more value for the business firm; contingent upon the fact that it provides value to customer and customer's customers operating its value creating system with agility, speed, economy and innovation; getting governed by the positive sum value creation outlook and guided by value- based management. With our value-based business triad, the product line engineering process can hope to achieve simultaneously value, variety and volume, product differentiation and cost leadership enabling the business firm to land on the virtuous value spiral.

  13. Software Engineering Education at Carnegie Mellon University: One University; Programs Taught in Two Places

    Directory of Open Access Journals (Sweden)

    Ray Bareiss

    2009-10-01

    Full Text Available Teaching Software Engineering to professional master‟s students is a challenging endeavor, and arguably for the past 20 years, Carnegie Mellon University has been quite successful. Although CMU teaches Software Engineering at sites world-wide and uses different pedagogies, the goal of the curriculum -- to produce world-class software engineers -- remains constant. This paper will discuss two of the most mature versions of Carnegie Mellon‟s Software Engineering program -- the main campus program and its "daughter program" at the Silicon Valley Campus. We discuss the programs with respect to the dimensions of curriculum, how students work and learn, how faculty teach, curricular materials, and how students are assessed to provide insight into how Carnegie Mellon continues to keep its programs fresh, to adapt them to local needs, and to meet its goal of excellence after 20 years.

  14. Software safety analysis techniques for developing safety critical software in the digital protection system of the LMR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jang Soo; Cheon, Se Woo; Kim, Chang Hoi; Sim, Yun Sub

    2001-02-01

    This report has described the software safety analysis techniques and the engineering guidelines for developing safety critical software to identify the state of the art in this field and to give the software safety engineer a trail map between the code and standards layer and the design methodology and documents layer. We have surveyed the management aspects of software safety activities during the software lifecycle in order to improve the safety. After identifying the conventional safety analysis techniques for systems, we have surveyed in details the software safety analysis techniques, software FMEA(Failure Mode and Effects Analysis), software HAZOP(Hazard and Operability Analysis), and software FTA(Fault Tree Analysis). We have also surveyed the state of the art in the software reliability assessment techniques. The most important results from the reliability techniques are not the specific probability numbers generated, but the insights into the risk importance of software features. To defend against potential common-mode failures, high quality, defense-in-depth, and diversity are considered to be key elements in digital I and C system design. To minimize the possibility of CMFs and thus increase the plant reliability, we have provided D-in-D and D analysis guidelines.

  15. Software safety analysis techniques for developing safety critical software in the digital protection system of the LMR

    International Nuclear Information System (INIS)

    Lee, Jang Soo; Cheon, Se Woo; Kim, Chang Hoi; Sim, Yun Sub

    2001-02-01

    This report has described the software safety analysis techniques and the engineering guidelines for developing safety critical software to identify the state of the art in this field and to give the software safety engineer a trail map between the code and standards layer and the design methodology and documents layer. We have surveyed the management aspects of software safety activities during the software lifecycle in order to improve the safety. After identifying the conventional safety analysis techniques for systems, we have surveyed in details the software safety analysis techniques, software FMEA(Failure Mode and Effects Analysis), software HAZOP(Hazard and Operability Analysis), and software FTA(Fault Tree Analysis). We have also surveyed the state of the art in the software reliability assessment techniques. The most important results from the reliability techniques are not the specific probability numbers generated, but the insights into the risk importance of software features. To defend against potential common-mode failures, high quality, defense-in-depth, and diversity are considered to be key elements in digital I and C system design. To minimize the possibility of CMFs and thus increase the plant reliability, we have provided D-in-D and D analysis guidelines

  16. Application of an integrated multi-criteria decision making AHP-TOPSIS methodology for ETL software selection.

    Science.gov (United States)

    Hanine, Mohamed; Boutkhoum, Omar; Tikniouine, Abdessadek; Agouti, Tarik

    2016-01-01

    Actually, a set of ETL software (Extract, Transform and Load) is available to constitute a major investment market. Each ETL uses its own techniques for extracting, transforming and loading data into data warehouse, which makes the task of evaluating ETL software very difficult. However, choosing the right software of ETL is critical to the success or failure of any Business Intelligence project. As there are many impacting factors in the selection of ETL software, the same process is considered as a complex multi-criteria decision making (MCDM) problem. In this study, an application of decision-making methodology that employs the two well-known MCDM techniques, namely Analytic Hierarchy Process (AHP) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) methods is designed. In this respect, the aim of using AHP is to analyze the structure of the ETL software selection problem and obtain weights of the selected criteria. Then, TOPSIS technique is used to calculate the alternatives' ratings. An example is given to illustrate the proposed methodology. Finally, a software prototype for demonstrating both methods is implemented.

  17. Active Involvement of Software Developers in Usability Engineering

    DEFF Research Database (Denmark)

    Bornoe, Nis; Stage, Jan

    2017-01-01

    The essence of usability evaluations is to produce feedback that supports the downstream utility so the interaction design can be improved and problems can be fixed. In practice, software development organizations experience several obstacles for conducting usability engineering. One suggested...... approach is to train and involve developers in all phases of usability activities from evaluations, to problem reporting, and making redesign proposals. Only limited work has previously investigated the impact of actively involving developers in usability engineering. In this paper, we present two small......, and problem fixing. At the organizational level, we found that the attitude towards and understanding of the role of usability engineering improved....

  18. Choosing your weapons : on sentiment analysis tools for software engineering research

    NARCIS (Netherlands)

    Jongeling, R.M.; Datta, S.; Serebrenik, A.; Koschke, R.; Krinke, J.; Robillard, M.

    2015-01-01

    Recent years have seen an increasing attention to social aspects of software engineering, including studies of emotions and sentiments experienced and expressed by the software developers. Most of these studies reuse existing sentiment analysis tools such as SentiStrength and NLTK. However, these

  19. Development methodology for industrial diesel engines; Entwicklungsmethode fuer Industrie-Dieselmotoren

    Energy Technology Data Exchange (ETDEWEB)

    Bergmann, Dirk; Kech, Johannes [MTU Friedrichshafen GmbH (Germany)

    2011-11-15

    In order to remain cost-effective with relatively low production volumes in spite of the high requirements regarding emissions and durability, MTU uses a clearly structured development methodology with a close interlinking of technology and product development in the development of its large engines. For the new engine of the 4000 Series with cooled EGR, MTU applied this methodology in order to implement the emissions concept from the initial idea right through to the serial product. (orig.)

  20. Changes in Transferable Knowledge Resulting from Study in a Graduate Software Engineering Curriculum

    Science.gov (United States)

    Bareiss, Ray; Sedano, Todd; Katz, Edward

    2012-01-01

    This paper presents the initial results of a study of the evolution of students' knowledge of software engineering from the beginning to the end of a master's degree curriculum in software engineering. Students were presented with a problem involving the initiation of a complex new project at the beginning of the program and again at the end of…

  1. USE OF INFORMATION TECHNOLOGY IN RESEARCH WORK OF FUTURE SOFTWARE ENGINEERS

    Directory of Open Access Journals (Sweden)

    M.O. Vinnik

    2014-04-01

    Full Text Available The article describes practical cooperation experience of Kherson State University’s lecturers group and students on software creation for automation, selection and processing of information about the universities scientists publication on the Internet. Recently, much attention is paid to scientometric bases by scientific societies of Eastern Europe. Large number of countries creates their own scientometric bases, platforms and other services. Working on familiar projects the future software engineers can be ready to implement similar tasks as for own country and for the world leaders. The result of research group work should be creation of software tools to support the business processes of research activities at the university. The involvement of students in research work allows using their creativity and employment potential for solving urgent problems of university, raising research competence of students’ professional skills in computer science and software engineering, which are involved in design and development of real software product. Participation of students in each stage is essential element of research group work. While creating software, students receive not only theoretical and practical knowledge of research work but also enhance their professional competences, as projects implementation is the closest to the professional software engineer’s work.

  2. Methodology for qualitative content analysis with the technique of mind maps using Nvivo and FreeMind softwares

    Directory of Open Access Journals (Sweden)

    José Leonardo Oliveira Lima

    2016-12-01

    Full Text Available Introduction: In a survey it is not enough choosing tools, resources and procedures. It is important to understand the method beyond the technics and their relationship with philosophy, epistemology and methodology. Objective: To discuss theoretical and methodological concerns on Qualitative Research in Information Science and the process of Qualitative Content Analysis (QCA at User Studies field and to show a followed path of QCA integrated with Mind Maps technic for developing categories and indicators, by using Qualitative Data Analysis Software (QDAS and Mind Maps designing tools. Methodology: The research was descriptive, methodological, bibliographical and fieldwork conducted with open interviews that were processed using the QCA method with the support of QDAS Nvivo and FreeMind Software for Mind Map design. Results: It is shown the theory of qualitative research and QCA and a methodological path of QCA by using techniques and software mentioned above. Conclusions: When it comes to qualitative researches, the theoretical framework suggests the need of more dialogue among Information Science and other disciplines. The process of QCA evidenced: a viable path that might help further related investigations using the QDAS; the contribution of Mind Maps and their design softwares to develop the indicators and categories of QCA.

  3. A survey of program slicing for software engineering

    Science.gov (United States)

    Beck, Jon

    1993-01-01

    This research concerns program slicing which is used as a tool for program maintainence of software systems. Program slicing decreases the level of effort required to understand and maintain complex software systems. It was first designed as a debugging aid, but it has since been generalized into various tools and extended to include program comprehension, module cohesion estimation, requirements verification, dead code elimination, and maintainence of several software systems, including reverse engineering, parallelization, portability, and reuse component generation. This paper seeks to address and define terminology, theoretical concepts, program representation, different program graphs, developments in static slicing, dynamic slicing, and semantics and mathematical models. Applications for conventional slicing are presented, along with a prognosis of future work in this field.

  4. Technology Transfer Challenges for High-Assurance Software Engineering Tools

    Science.gov (United States)

    Koga, Dennis (Technical Monitor); Penix, John; Markosian, Lawrence Z.

    2003-01-01

    In this paper, we describe our experience with the challenges thar we are currently facing in our effort to develop advanced software verification and validation tools. We categorize these challenges into several areas: cost benefits modeling, tool usability, customer application domain, and organizational issues. We provide examples of challenges in each area and identrfj, open research issues in areas which limit our ability to transfer high-assurance software engineering tools into practice.

  5. ICSE 2009 Tutorial - Semantic Web Technologies in Software Engineering

    OpenAIRE

    Gall, H C; Reif, G

    2009-01-01

    Over the years, the software engineering community has developed various tools to support the specification, development, and maintainance of software. Many of these tools use proprietary data formats to store artifacts which hamper interoperability. On the other hand, the Semantic Web provides a common framework that allows data to be shared and reused across application, enterprise, and community boundaries. Ontologies are used to define the concepts in the domain of discourse and their rel...

  6. Software-engineering-based model for mitigating Repetitive Strain ...

    African Journals Online (AJOL)

    The incorporation of Information and Communication Technology (ICT) in virtually all facets of human endeavours has fostered the use of computers. This has induced Repetitive Stress Injury (RSI) for continuous and persistent computer users. Proposing a software engineering model capable of enacted RSI force break ...

  7. Incorporating Six Sigma Methodology Training into Chemical Engineering Education

    Science.gov (United States)

    Dai, Lenore L.

    2007-01-01

    Six Sigma is a buzz term in today's technology and business world and there has been increasing interest to initiate Six Sigma training in college education. We have successfully incorporated Six Sigma methodology training into a traditional chemical engineering course, Engineering Experimentation, at Texas Tech University. The students have…

  8. Advances in Multimedia, Software Engineering and Computing Vol.1 : Proceedings of the 2011 MSEC International Conference on Multimedia, Software Engineering and Computing

    CERN Document Server

    Lin, Sally

    2012-01-01

    MSEC2011 is an integrated conference concentrating its focus upon Multimedia ,Software Engineering, Computing and Education. In the proceeding, you can learn much more knowledge about Multimedia, Software Engineering ,Computing and Education of researchers all around the world. The main role of the proceeding is to be used as an exchange pillar for researchers who are working in the mentioned field. In order to meet high standard of Springer, AISC series ,the organization committee has made their efforts to do the following things. Firstly, poor quality paper has been refused after reviewing course by anonymous referee experts. Secondly, periodically review meetings have been held around the reviewers about five times for exchanging reviewing suggestions. Finally, the conference organization had several preliminary sessions before the conference. Through efforts of different people and departments, the conference will be successful and fruitful.

  9. Advances in Multimedia, Software Engineering and Computing Vol.2 : Proceedings of the 2011 MSEC International Conference on Multimedia, Software Engineering and Computing

    CERN Document Server

    Lin, Sally

    2012-01-01

    MSEC2011 is an integrated conference concentrating its focus upon Multimedia ,Software Engineering, Computing and Education. In the proceeding, you can learn much more knowledge about Multimedia, Software Engineering, Computing and Education of researchers all around the world. The main role of the proceeding is to be used as an exchange pillar for researchers who are working in the mentioned field. In order to meet high standard of Springer, AISC series ,the organization committee has made their efforts to do the following things. Firstly, poor quality paper has been refused after reviewing course by anonymous referee experts. Secondly, periodically review meetings have been held around the reviewers about five times for exchanging reviewing suggestions. Finally, the conference organization had several preliminary sessions before the conference. Through efforts of different people and departments, the conference will be successful and fruitful.

  10. Improving collaborative learning in online software engineering education

    Science.gov (United States)

    Neill, Colin J.; DeFranco, Joanna F.; Sangwan, Raghvinder S.

    2017-11-01

    Team projects are commonplace in software engineering education. They address a key educational objective, provide students critical experience relevant to their future careers, allow instructors to set problems of greater scale and complexity than could be tackled individually, and are a vehicle for socially constructed learning. While all student teams experience challenges, those in fully online programmes must also deal with remote working, asynchronous coordination, and computer-mediated communications all of which contribute to greater social distance between team members. We have developed a facilitation framework to aid team collaboration and have demonstrated its efficacy, in prior research, with respect to team performance and outcomes. Those studies indicated, however, that despite experiencing improved project outcomes, students working in effective software engineering teams did not experience significantly improved individual achievement. To address this deficiency we implemented theoretically grounded refinements to the collaboration model based upon peer-tutoring research. Our results indicate a modest, but statistically significant (p = .08), improvement in individual achievement using this refined model.

  11. Developing Project Duration Models in Software Engineering

    Institute of Scientific and Technical Information of China (English)

    Pierre Bourque; Serge Oligny; Alain Abran; Bertrand Fournier

    2007-01-01

    Based on the empirical analysis of data contained in the International Software Benchmarking Standards Group(ISBSG) repository, this paper presents software engineering project duration models based on project effort. Duration models are built for the entire dataset and for subsets of projects developed for personal computer, mid-range and mainframeplatforms. Duration models are also constructed for projects requiring fewer than 400 person-hours of effort and for projectsre quiring more than 400 person-hours of effort. The usefulness of adding the maximum number of assigned resources as asecond independent variable to explain duration is also analyzed. The opportunity to build duration models directly fromproject functional size in function points is investigated as well.

  12. Support for Different Roles in Software Engineering Master's Thesis Projects

    Science.gov (United States)

    Host, M.; Feldt, R.; Luders, F.

    2010-01-01

    Like many engineering programs in Europe, the final part of most Swedish software engineering programs is a longer project in which the students write a Master's thesis. These projects are often conducted in cooperation between a university and industry, and the students often have two supervisors, one at the university and one in industry. In…

  13. The Effect of AOP on Software Engineering, with Particular Attention to OIF and Event Quantification

    Science.gov (United States)

    Havelund, Klaus; Filman, Robert; Korsmeyer, David (Technical Monitor)

    2003-01-01

    We consider the impact of Aspect-Oriented Programming on Software Engineering, and, in particular, analyze two AOP systems, one of which does component wrapping and the other, quantification over events, for their software engineering effects.

  14. 11th International Conference on Software Engineering Research, Management and Applications

    CERN Document Server

    2014-01-01

    The purpose of the 11th International Conference on Software Engineering Research, Management and Applications (SERA 2013) held on August 7 - 9, 2012 in Prague, Czech Republic was to bring together scientists, engineers, computer users, and students to share their experiences and exchange new ideas and research results about all aspects (theory, applications and tools) of Software Engineering Research, Management and Applications, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them.   The conference organizers selected 17 outstanding papers from those papers accepted for presentation at the conference in order to publish them in this volume.  The papers were chosen based on review scores submitted by members of the program committee, and further rigorous rounds of review.

  15. Improving Collaborative Learning in Online Software Engineering Education

    Science.gov (United States)

    Neill, Colin J.; DeFranco, Joanna F.; Sangwan, Raghvinder S.

    2017-01-01

    Team projects are commonplace in software engineering education. They address a key educational objective, provide students critical experience relevant to their future careers, allow instructors to set problems of greater scale and complexity than could be tackled individually, and are a vehicle for socially constructed learning. While all…

  16. Enterprise resource planning (ERP) implementation using the value engineering methodology and Six Sigma tools

    Science.gov (United States)

    Leu, Jun-Der; Lee, Larry Jung-Hsing

    2017-09-01

    Enterprise resource planning (ERP) is a software solution that integrates the operational processes of the business functions of an enterprise. However, implementing ERP systems is a complex process. In addition to the technical issues, companies must address problems associated with business process re-engineering, time and budget control, and organisational change. Numerous industrial studies have shown that the failure rate of ERP implementation is high, even for well-designed systems. Thus, ERP projects typically require a clear methodology to support the project execution and effectiveness. In this study, we propose a theoretical model for ERP implementation. The value engineering (VE) method forms the basis of the proposed framework, which integrates Six Sigma tools. The proposed framework encompasses five phases: knowledge generation, analysis, creation, development and execution. In the VE method, potential ERP problems related to software, hardware, consultation and organisation are analysed in a group-decision manner and in relation to value, and Six Sigma tools are applied to avoid any project defects. We validate the feasibility of the proposed model by applying it to an international manufacturing enterprise in Taiwan. The results show improvements in customer response time and operational efficiency in terms of work-in-process and turnover of materials. Based on the evidence from the case study, the theoretical framework is discussed together with the study's limitations and suggestions for future research.

  17. Google chemtrails: a methodology to analyze topic representation in search engine results

    OpenAIRE

    Ballatore, Andrea

    2015-01-01

    Search engine results influence the visibility of different viewpoints in political, cultural, and scientific debates. Treating search engines as editorial products with intrinsic biases can help understand the structure of information flows in new media. This paper outlines an empirical methodology to analyze the representation of topics in search engines, reducing the spatial and temporal biases in the results. As a case study, the methodology is applied to 15 popular conspiracy theories, e...

  18. Durable ideas in software engineering concepts, methods and approaches from my virtual toolbox

    CERN Document Server

    J Cusick, James

    2013-01-01

    ""Software Engineering now occupies a central place in the development of technology and in the advancement of the economy. From telecommunications to aerospace and from cash registers to medical imaging, software plays a vital and often decisive role in the successful accomplishment of a variety of projects. The creation of software requires a variety of techniques, tools, and especially, properly skilled engineers. This e-book focuses on core concepts and approaches that have proven useful to the author time and time again on many industry projects over a quarter century of research, develo

  19. Software Engineering Researchers' Attitudes on Case Studies and Experiments: an Exploratory Survey

    OpenAIRE

    Tofan, Dan; Galster, Matthias; Avgeriou, Paris; Weyns, Danny

    2011-01-01

    Background: Case studies and experiments are research methods frequently applied in empirical software engineering. Experiments are well-­understood and their value as an empirical method is recognized. On the other hand, there seem to be different opinions on what constitutes a case study, and about the value of case studies as a thorough research method. Aim: We aim at exploring the attitudes of software engineering researchers on case studies and experiments. Furthermore, we investigate ho...

  20. A Role-Playing Game for a Software Engineering Lab: Developing a Product Line

    Science.gov (United States)

    Zuppiroli, Sara; Ciancarini, Paolo; Gabbrielli, Maurizio

    2012-01-01

    Software product line development refers to software engineering practices and techniques for creating families of similar software systems from a basic set of reusable components, called shared assets. Teaching how to deal with software product lines in a university lab course is a challenging task, because there are several practical issues that…

  1. Software for Collaborative Engineering of Launch Rockets

    Science.gov (United States)

    Stanley, Thomas Troy

    2003-01-01

    The Rocket Evaluation and Cost Integration for Propulsion and Engineering software enables collaborative computing with automated exchange of information in the design and analysis of launch rockets and other complex systems. RECIPE can interact with and incorporate a variety of programs, including legacy codes, that model aspects of a system from the perspectives of different technological disciplines (e.g., aerodynamics, structures, propulsion, trajectory, aeroheating, controls, and operations) and that are used by different engineers on different computers running different operating systems. RECIPE consists mainly of (1) ISCRM a file-transfer subprogram that makes it possible for legacy codes executed in their original operating systems on their original computers to exchange data and (2) CONES an easy-to-use filewrapper subprogram that enables the integration of legacy codes. RECIPE provides a tightly integrated conceptual framework that emphasizes connectivity among the programs used by the collaborators, linking these programs in a manner that provides some configuration control while facilitating collaborative engineering tradeoff studies, including design to cost studies. In comparison with prior collaborative-engineering schemes, one based on the use of RECIPE enables fewer engineers to do more in less time.

  2. Delivering Software Process-Specific Project Courses in Tertiary Education Environment: Challenges and Solution

    Science.gov (United States)

    Rong, Guoping; Shao, Dong

    2012-01-01

    The importance of delivering software process courses to software engineering students has been more and more recognized in China in recent years. However, students usually cannot fully appreciate the value of software process courses by only learning methodology and principle in the classroom. Therefore, a process-specific project course was…

  3. Requirements Engineering in Building Climate Science Software

    Science.gov (United States)

    Batcheller, Archer L.

    Software has an important role in supporting scientific work. This dissertation studies teams that build scientific software, focusing on the way that they determine what the software should do. These requirements engineering processes are investigated through three case studies of climate science software projects. The Earth System Modeling Framework assists modeling applications, the Earth System Grid distributes data via a web portal, and the NCAR (National Center for Atmospheric Research) Command Language is used to convert, analyze and visualize data. Document analysis, observation, and interviews were used to investigate the requirements-related work. The first research question is about how and why stakeholders engage in a project, and what they do for the project. Two key findings arise. First, user counts are a vital measure of project success, which makes adoption important and makes counting tricky and political. Second, despite the importance of quantities of users, a few particular "power users" develop a relationship with the software developers and play a special role in providing feedback to the software team and integrating the system into user practice. The second research question focuses on how project objectives are articulated and how they are put into practice. The team seeks to both build a software system according to product requirements but also to conduct their work according to process requirements such as user support. Support provides essential communication between users and developers that assists with refining and identifying requirements for the software. It also helps users to learn and apply the software to their real needs. User support is a vital activity for scientific software teams aspiring to create infrastructure. The third research question is about how change in scientific practice and knowledge leads to changes in the software, and vice versa. The "thickness" of a layer of software infrastructure impacts whether the

  4. Artificial intelligence and the space station software support environment

    Science.gov (United States)

    Marlowe, Gilbert

    1986-01-01

    In a software system the size of the Space Station Software Support Environment (SSE), no one software development or implementation methodology is presently powerful enough to provide safe, reliable, maintainable, cost effective real time or near real time software. In an environment that must survive one of the most harsh and long life times, software must be produced that will perform as predicted, from the first time it is executed to the last. Many of the software challenges that will be faced will require strategies borrowed from Artificial Intelligence (AI). AI is the only development area mentioned as an example of a legitimate reason for a waiver from the overall requirement to use the Ada programming language for software development. The limits are defined of the applicability of the Ada language Ada Programming Support Environment (of which the SSE is a special case), and software engineering to AI solutions by describing a scenario that involves many facets of AI methodologies.

  5. Proceedings 10th International Workshop on Formal Engineering Approaches to Software Components and Architectures

    OpenAIRE

    Buhnova, Barbora; Happe, Lucia; Kofroň, Jan

    2013-01-01

    These are the proceedings of the 10th International Workshop on Formal Engineering approaches to Software Components and Architectures (FESCA). The workshop was held on March 23, 2013 in Rome (Italy) as a satellite event to the European Joint Conference on Theory and Practice of Software (ETAPS'13). The aim of the FESCA workshop is to bring together both young and senior researchers from formal methods, software engineering, and industry interested in the development and application of formal...

  6. Incorporating Computer-Aided Software in the Undergraduate Chemical Engineering Core Courses

    Science.gov (United States)

    Alnaizy, Raafat; Abdel-Jabbar, Nabil; Ibrahim, Taleb H.; Husseini, Ghaleb A.

    2014-01-01

    Introductions of computer-aided software and simulators are implemented during the sophomore-year of the chemical engineering (ChE) curriculum at the American University of Sharjah (AUS). Our faculty concurs that software integration within the curriculum is beneficial to our students, as evidenced by the positive feedback received from industry…

  7. Validation testing of safety-critical software

    International Nuclear Information System (INIS)

    Kim, Hang Bae; Han, Jae Bok

    1995-01-01

    A software engineering process has been developed for the design of safety critical software for Wolsung 2/3/4 project to satisfy the requirements of the regulatory body. Among the process, this paper described the detail process of validation testing performed to ensure that the software with its hardware, developed by the design group, satisfies the requirements of the functional specification prepared by the independent functional group. To perform the tests, test facility and test software were developed and actual safety system computer was connected. Three kinds of test cases, i.e., functional test, performance test and self-check test, were programmed and run to verify each functional specifications. Test failures were feedback to the design group to revise the software and test results were analyzed and documented in the report to submit to the regulatory body. The test methodology and procedure were very efficient and satisfactory to perform the systematic and automatic test. The test results were also acceptable and successful to verify the software acts as specified in the program functional specification. This methodology can be applied to the validation of other safety-critical software. 2 figs., 2 tabs., 14 refs. (Author)

  8. Service software engineering for innovative infrastructure for global financial services

    OpenAIRE

    MAAD , Soha; MCCARTHY , James B.; GARBAYA , Samir; Beynon , Meurig; Nagarajan , Rajagopal

    2010-01-01

    International audience; The recent financial crisis motivates our re-thinking of the engineering principles for service software and infrastructures intended to create business value in vital sectors. Existing monolithic, inwarddirected, cost insensitive and highly regulated technical and organizational infrastructures for financial services make it difficult for the domain to benefit from opportunities offered by new computing models such as cloud computing, software as a service, hardware a...

  9. 2016 KIVA-hpFE Development: A Robust and Accurate Engine Modeling Software

    Energy Technology Data Exchange (ETDEWEB)

    Carrington, David Bradley [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Waters, Jiajia [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-10-25

    Los Alamos National Laboratory and its collaborators are facilitating engine modeling by improving accuracy and robustness of the modeling, and improving the robustness of software. We also continue to improve the physical modeling methods. We are developing and implementing new mathematical algorithms, those that represent the physics within an engine. We provide software that others may use directly or that they may alter with various models e.g., sophisticated chemical kinetics, different turbulent closure methods or other fuel injection and spray systems.

  10. Risk Based Inspection Methodology and Software Applied to Atmospheric Storage Tanks

    Science.gov (United States)

    Topalis, P.; Korneliussen, G.; Hermanrud, J.; Steo, Y.

    2012-05-01

    A new risk-based inspection (RBI) methodology and software is presented in this paper. The objective of this work is to allow management of the inspections of atmospheric storage tanks in the most efficient way, while, at the same time, accident risks are minimized. The software has been built on the new risk framework architecture, a generic platform facilitating efficient and integrated development of software applications using risk models. The framework includes a library of risk models and the user interface is automatically produced on the basis of editable schemas. This risk-framework-based RBI tool has been applied in the context of RBI for above-ground atmospheric storage tanks (AST) but it has been designed with the objective of being generic enough to allow extension to the process plants in general. This RBI methodology is an evolution of an approach and mathematical models developed for Det Norske Veritas (DNV) and the American Petroleum Institute (API). The methodology assesses damage mechanism potential, degradation rates, probability of failure (PoF), consequence of failure (CoF) in terms of environmental damage and financial loss, risk and inspection intervals and techniques. The scope includes assessment of the tank floor for soil-side external corrosion and product-side internal corrosion and the tank shell courses for atmospheric corrosion and internal thinning. It also includes preliminary assessment for brittle fracture and cracking. The data are structured according to an asset hierarchy including Plant, Production Unit, Process Unit, Tag, Part and Inspection levels and the data are inherited / defaulted seamlessly from a higher hierarchy level to a lower level. The user interface includes synchronized hierarchy tree browsing, dynamic editor and grid-view editing and active reports with drill-in capability.

  11. Automation of Military Civil Engineering and Site Design Functions: Software Evaluation

    Science.gov (United States)

    1989-09-01

    AutoCad , in-house application programs written in AutoCad command language, AutoLISP , and BASIC Would like to obtain: Surveying, earthwork, utilities...Experiment Station (WES) Corps library programs, no one software is being used more than another. For drafting, AutoCAD has been the most commonly...ware packages evaluated. D.C.A. Engineering Software D.C.A. software is used to enhance the AutoCAD drafting package and operates solely within the

  12. Workshop on cooperative and human aspects of software engineering (CHASE 2011)

    DEFF Research Database (Denmark)

    Cataldo, Marcelo; de Souza, Cleidson; Dittrich, Yvonne

    2011-01-01

    is to provide a forum for discussing high quality research on human and cooperative aspects of software engineering. We aim at providing both a meeting place for the growing community and the possibility for researchers interested in joining the field to present their work in progress and get an overview over......Software is created by people for people working in varied environments, under various conditions. Thus understanding cooperative and human aspects of software development is crucial to comprehend how methods and tools are used, and thereby improve the creation and maintenance of software. Over...

  13. Software Engineering Tools for Scientific Models

    Science.gov (United States)

    Abrams, Marc; Saboo, Pallabi; Sonsini, Mike

    2013-01-01

    Software tools were constructed to address issues the NASA Fortran development community faces, and they were tested on real models currently in use at NASA. These proof-of-concept tools address the High-End Computing Program and the Modeling, Analysis, and Prediction Program. Two examples are the NASA Goddard Earth Observing System Model, Version 5 (GEOS-5) atmospheric model in Cell Fortran on the Cell Broadband Engine, and the Goddard Institute for Space Studies (GISS) coupled atmosphere- ocean model called ModelE, written in fixed format Fortran.

  14. Epistemology, software engineering and formal methods

    Science.gov (United States)

    Holloway, C. Michael

    1994-01-01

    One of the most basic questions anyone can ask is, 'How do I know that what I think I know is true?' The study of this question is called epistemology. Traditionally, epistemology has been considered to be of legitimate interest only to philosophers, theologians, and three year old children who respond to every statement by asking, 'Why?' Software engineers need to be interested in the subject, however, because a lack of sufficient understanding of epistemology contributes to many of the current problems in the field.

  15. Software engineering experience from the LEP experiment OPAL

    International Nuclear Information System (INIS)

    Schaile, O.

    1990-01-01

    This contribution describes some of the activities within the OPAL collaboration at LEP to apply Software Engineering Techniques for program development and data documentation. It concentrates on two aspects: Structured Analysis Techniques and a data documentation system developed within OPAL. As far as evaluations are given they are the authors view and opinion

  16. Statistical Software Engineering

    Science.gov (United States)

    1998-04-13

    multiversion software subject to coincident errors. IEEE Trans. Software Eng. SE-11:1511-1517. Eckhardt, D.E., A.K Caglayan, J.C. Knight, L.D. Lee, D.F...J.C. and N.G. Leveson. 1986. Experimental evaluation of the assumption of independence in multiversion software. IEEE Trans. Software

  17. Orthographic Software Modelling: A Novel Approach to View-Based Software Engineering

    Science.gov (United States)

    Atkinson, Colin

    The need to support multiple views of complex software architectures, each capturing a different aspect of the system under development, has been recognized for a long time. Even the very first object-oriented analysis/design methods such as the Booch method and OMT supported a number of different diagram types (e.g. structural, behavioral, operational) and subsequent methods such as Fusion, Kruchten's 4+1 views and the Rational Unified Process (RUP) have added many more views over time. Today's leading modeling languages such as the UML and SysML, are also oriented towards supporting different views (i.e. diagram types) each able to portray a different facets of a system's architecture. More recently, so called enterprise architecture frameworks such as the Zachman Framework, TOGAF and RM-ODP have become popular. These add a whole set of new non-functional views to the views typically emphasized in traditional software engineering environments.

  18. Diagnostic on the appropriation of metrics in software medium enterprises of Medellin city

    Directory of Open Access Journals (Sweden)

    Piedad Metaute P.

    2016-06-01

    Full Text Available This article was produced as a result of the investigation, "Ownership and use of metrics in software medium-sized city of Medellin." The objective of this research was to conduct an assessment of the ownership and use of metrics, seeking to make recommendations that contribute to the strengthening of academia and the productive sector in this topic. The methodology used was based on documentary review related to international norms, standards, methodologies, guides and tools that address software quality metrics especially applicable during Software Engineering. The main sources consulted were books, journals and articles, which could raise the foundation for such research, likewise, field research was used, it applied to medium-sized enterprises engaged in the construction of the product, where contact he had with people involved in these processes, of which data pertaining to real contexts where the events are generated are obtained. topics were addressed as project control, process control, software engineering, control of product quality software, application time metrics, applying metrics at different stages, certifications metrics, methodologies, tools used, processes where contributions in their application, types of tests which are applied, among others, which resulted, argued discussion findings generated from the respective regulations, best practices and needs of different contexts where they are used metrics apply software products in addition to the respective conclusions and practical implications that allowed for an assessment of the ownership and use of metrics in software medium-sized city of Medellin, as well as some suggestions for the academy, aimed at strengthening subjects whose responsibility generating skills in Software Engineering, especially in the metrics, and contextualized for significant contributions to the industry.

  19. Use of Soft Computing Technologies For Rocket Engine Control

    Science.gov (United States)

    Trevino, Luis C.; Olcmen, Semih; Polites, Michael

    2003-01-01

    The problem to be addressed in this paper is to explore how the use of Soft Computing Technologies (SCT) could be employed to further improve overall engine system reliability and performance. Specifically, this will be presented by enhancing rocket engine control and engine health management (EHM) using SCT coupled with conventional control technologies, and sound software engineering practices used in Marshall s Flight Software Group. The principle goals are to improve software management, software development time and maintenance, processor execution, fault tolerance and mitigation, and nonlinear control in power level transitions. The intent is not to discuss any shortcomings of existing engine control and EHM methodologies, but to provide alternative design choices for control, EHM, implementation, performance, and sustaining engineering. The approaches outlined in this paper will require knowledge in the fields of rocket engine propulsion, software engineering for embedded systems, and soft computing technologies (i.e., neural networks, fuzzy logic, and Bayesian belief networks), much of which is presented in this paper. The first targeted demonstration rocket engine platform is the MC-1 (formerly FASTRAC Engine) which is simulated with hardware and software in the Marshall Avionics & Software Testbed laboratory that

  20. Aspect-Oriented Model-Driven Software Product Line Engineering

    Science.gov (United States)

    Groher, Iris; Voelter, Markus

    Software product line engineering aims to reduce development time, effort, cost, and complexity by taking advantage of the commonality within a portfolio of similar products. The effectiveness of a software product line approach directly depends on how well feature variability within the portfolio is implemented and managed throughout the development lifecycle, from early analysis through maintenance and evolution. This article presents an approach that facilitates variability implementation, management, and tracing by integrating model-driven and aspect-oriented software development. Features are separated in models and composed of aspect-oriented composition techniques on model level. Model transformations support the transition from problem to solution space models. Aspect-oriented techniques enable the explicit expression and modularization of variability on model, template, and code level. The presented concepts are illustrated with a case study of a home automation system.

  1. What does it mean to use a method? Towards a practice theory for software engineering

    DEFF Research Database (Denmark)

    Dittrich, Yvonne

    2016-01-01

    Context Methods and processes, along with the tools to support them, are at the heart of software engineering as a discipline. However, as we all know, that often the use of the same method neither impacts software projects in a comparable manner nor the software they result in. What is lacking...... software development and teaching are indicated. Conclusion The theoretical/philosophical concepts allow the explaining of heterogeneity in application of software engineering methods in line with empirical research results....... is an understanding of how methods affect software development. Objective The article develops a set of concepts based on the practice-concept in philosophy of sociology as a base to describe software development as social practice, and develop an understanding of methods and their application that explains...

  2. Fuzzy/Neural Software Estimates Costs of Rocket-Engine Tests

    Science.gov (United States)

    Douglas, Freddie; Bourgeois, Edit Kaminsky

    2005-01-01

    The Highly Accurate Cost Estimating Model (HACEM) is a software system for estimating the costs of testing rocket engines and components at Stennis Space Center. HACEM is built on a foundation of adaptive-network-based fuzzy inference systems (ANFIS) a hybrid software concept that combines the adaptive capabilities of neural networks with the ease of development and additional benefits of fuzzy-logic-based systems. In ANFIS, fuzzy inference systems are trained by use of neural networks. HACEM includes selectable subsystems that utilize various numbers and types of inputs, various numbers of fuzzy membership functions, and various input-preprocessing techniques. The inputs to HACEM are parameters of specific tests or series of tests. These parameters include test type (component or engine test), number and duration of tests, and thrust level(s) (in the case of engine tests). The ANFIS in HACEM are trained by use of sets of these parameters, along with costs of past tests. Thereafter, the user feeds HACEM a simple input text file that contains the parameters of a planned test or series of tests, the user selects the desired HACEM subsystem, and the subsystem processes the parameters into an estimate of cost(s).

  3. Software engineering capability for Ada (GRASP/Ada Tool)

    Science.gov (United States)

    Cross, James H., II

    1995-01-01

    The GRASP/Ada project (Graphical Representations of Algorithms, Structures, and Processes for Ada) has successfully created and prototyped a new algorithmic level graphical representation for Ada software, the Control Structure Diagram (CSD). The primary impetus for creation of the CSD was to improve the comprehension efficiency of Ada software and, as a result, improve reliability and reduce costs. The emphasis has been on the automatic generation of the CSD from Ada PDL or source code to support reverse engineering and maintenance. The CSD has the potential to replace traditional prettyprinted Ada Source code. A new Motif compliant graphical user interface has been developed for the GRASP/Ada prototype.

  4. A Framework for Performing Verification and Validation in Reuse Based Software Engineering

    Science.gov (United States)

    Addy, Edward A.

    1997-01-01

    Verification and Validation (V&V) is currently performed during application development for many systems, especially safety-critical and mission- critical systems. The V&V process is intended to discover errors, especially errors related to critical processing, as early as possible during the development process. The system application provides the context under which the software artifacts are validated. This paper describes a framework that extends V&V from an individual application system to a product line of systems that are developed within an architecture-based software engineering environment. This framework includes the activities of traditional application-level V&V, and extends these activities into domain engineering and into the transition between domain engineering and application engineering. The framework includes descriptions of the types of activities to be performed during each of the life-cycle phases, and provides motivation for the activities.

  5. Mechanistic modelling of cancer: some reflections from software engineering and philosophy of science.

    Science.gov (United States)

    Cañete-Valdeón, José M; Wieringa, Roel; Smallbone, Kieran

    2012-12-01

    There is a growing interest in mathematical mechanistic modelling as a promising strategy for understanding tumour progression. This approach is accompanied by a methodological change of making research, in which models help to actively generate hypotheses instead of waiting for general principles to become apparent once sufficient data are accumulated. This paper applies recent research from philosophy of science to uncover three important problems of mechanistic modelling which may compromise its mainstream application, namely: the dilemma of formal and informal descriptions, the need to express degrees of confidence and the need of an argumentation framework. We report experience and research on similar problems from software engineering and provide evidence that the solutions adopted there can be transferred to the biological domain. We hope this paper can provoke new opportunities for further and profitable interdisciplinary research in the field.

  6. Scrum2Kanban: Integrating Kanban and Scrum in a University Software Engineering Capstone Course

    OpenAIRE

    Matthies, Christoph

    2018-01-01

    Using university capstone courses to teach agile software development methodologies has become commonplace, as agile methods have gained support in professional software development. This usually means students are introduced to and work with the currently most popular agile methodology: Scrum. However, as the agile methods employed in the industry change and are adapted to different contexts, university courses must follow suit. A prime example of this is the Kanban method, which has recentl...

  7. The Company Approach to Software Engineering Project Courses

    Science.gov (United States)

    Broman, D.; Sandahl, K.; Abu Baker, M.

    2012-01-01

    Teaching larger software engineering project courses at the end of a computing curriculum is a way for students to learn some aspects of real-world jobs in industry. Such courses, often referred to as capstone courses, are effective for learning how to apply the skills they have acquired in, for example, design, test, and configuration management.…

  8. Using UML Modeling to Facilitate Three-Tier Architecture Projects in Software Engineering Courses

    Science.gov (United States)

    Mitra, Sandeep

    2014-01-01

    This article presents the use of a model-centric approach to facilitate software development projects conforming to the three-tier architecture in undergraduate software engineering courses. Many instructors intend that such projects create software applications for use by real-world customers. While it is important that the first version of these…

  9. Engineering radioecology: Methodological considerations

    International Nuclear Information System (INIS)

    Nechaev, A.F.; Projaev, V.V.; Sobolev, I.A.; Dmitriev, S.A.

    1995-01-01

    The term ''radioecology'' has been widely recognized in scientific and technical societies. At the same time, this scientific school (radioecology) does not have a precise/generally acknowledged structure, unified methodical basis, fixed subjects of investigation, etc. In other words, radioecology is a vast, important but rather amorphous conglomerate of various ideas, amalgamated mostly by their involvement in biospheric effects of ionizing radiation and some conceptual stereotypes. This paradox was acceptable up to a certain time. However, with the termination of the Cold War and because of remarkable political changes in the world, it has become possible to convert the problem of environmental restoration from the scientific sphere in particularly practical terms. Already the first steps clearly showed an imperfection of existing technologies, managerial and regulatory schemes; lack of qualified specialists, relevant methods and techniques; uncertainties in methodology of decision-making, etc. Thus, building up (or maybe, structuring) of special scientific and technological basis, which the authors call ''engineering radioecology'', seems to be an important task. In this paper they endeavored to substantiate the last thesis and to suggest some preliminary ideas concerning the subject matter of engineering radioecology

  10. Software engineering article types: An analysis of the literature

    NARCIS (Netherlands)

    Montesi, M.; Lago, P.

    2008-01-01

    The software engineering (SE) community has recently recognized that the field lacks well-established research paradigms and clear guidance on how to write good research reports. With no comprehensive guide to the different article types in the field, article writing and reviewing heavily depends on

  11. Potential Errors and Test Assessment in Software Product Line Engineering

    Directory of Open Access Journals (Sweden)

    Hartmut Lackner

    2015-04-01

    Full Text Available Software product lines (SPL are a method for the development of variant-rich software systems. Compared to non-variable systems, testing SPLs is extensive due to an increasingly amount of possible products. Different approaches exist for testing SPLs, but there is less research for assessing the quality of these tests by means of error detection capability. Such test assessment is based on error injection into correct version of the system under test. However to our knowledge, potential errors in SPL engineering have never been systematically identified before. This article presents an overview over existing paradigms for specifying software product lines and the errors that can occur during the respective specification processes. For assessment of test quality, we leverage mutation testing techniques to SPL engineering and implement the identified errors as mutation operators. This allows us to run existing tests against defective products for the purpose of test assessment. From the results, we draw conclusions about the error-proneness of the surveyed SPL design paradigms and how quality of SPL tests can be improved.

  12. A Framework for Performing V&V within Reuse-Based Software Engineering

    Science.gov (United States)

    Addy, Edward A.

    1996-01-01

    Verification and validation (V&V) is performed during application development for many systems, especially safety-critical and mission-critical systems. The V&V process is intended to discover errors, especially errors related to critical processing, as early as possible during the development process. Early discovery is important in order to minimize the cost and other impacts of correcting these errors. In order to provide early detection of errors, V&V is conducted in parallel with system development, often beginning with the concept phase. In reuse-based software engineering, however, decisions on the requirements, design and even implementation of domain assets can be made prior to beginning development of a specific system. In this case, V&V must be performed during domain engineering in order to have an impact on system development. This paper describes a framework for performing V&V within architecture-centric, reuse-based software engineering. This framework includes the activities of traditional application-level V&V, and extends these activities into domain engineering and into the transition between domain engineering and application engineering. The framework includes descriptions of the types of activities to be performed during each of the life-cycle phases, and provides motivation for the activities.

  13. A Comparative Analysis of Two Software Development Methodologies: Rational Unified Process and Extreme Programming

    Directory of Open Access Journals (Sweden)

    Marcelo Rafael Borth

    2014-01-01

    Full Text Available Software development methodologies were created to meet the great market demand for innovation, productivity, quality and performance. With the use of a methodology, it is possible to reduce the cost, the risk, the development time, and even increase the quality of the final product. This article compares two of these development methodologies: the Rational Unified Process and the Extreme Programming. The comparison shows the main differences and similarities between the two approaches, and highlights and comments some of their predominant features.

  14. Ethical education in software engineering: responsibility in the production of complex systems.

    Science.gov (United States)

    Génova, Gonzalo; González, M Rosario; Fraga, Anabel

    2007-12-01

    Among the various contemporary schools of moral thinking, consequence-based ethics, as opposed to rule-based, seems to have a good acceptance among professionals such as software engineers. But naïve consequentialism is intellectually too weak to serve as a practical guide in the profession. Besides, the complexity of software systems makes it very hard to know in advance the consequences that will derive from professional activities in the production of software. Therefore, following the spirit of well-known codes of ethics such as the ACM/IEEE's, we advocate for a more solid position in the ethical education of software engineers, which we call 'moderate deontologism', that takes into account both rules and consequences to assess the goodness of actions, and at the same time pays an adequate consideration to the absolute values of human dignity. In order to educate responsible professionals, however, this position should be complemented with a pedagogical approach to virtue ethics.

  15. Prediction of Software Reliability using Bio Inspired Soft Computing Techniques.

    Science.gov (United States)

    Diwaker, Chander; Tomar, Pradeep; Poonia, Ramesh C; Singh, Vijander

    2018-04-10

    A lot of models have been made for predicting software reliability. The reliability models are restricted to using particular types of methodologies and restricted number of parameters. There are a number of techniques and methodologies that may be used for reliability prediction. There is need to focus on parameters consideration while estimating reliability. The reliability of a system may increase or decreases depending on the selection of different parameters used. Thus there is need to identify factors that heavily affecting the reliability of the system. In present days, reusability is mostly used in the various area of research. Reusability is the basis of Component-Based System (CBS). The cost, time and human skill can be saved using Component-Based Software Engineering (CBSE) concepts. CBSE metrics may be used to assess those techniques which are more suitable for estimating system reliability. Soft computing is used for small as well as large-scale problems where it is difficult to find accurate results due to uncertainty or randomness. Several possibilities are available to apply soft computing techniques in medicine related problems. Clinical science of medicine using fuzzy-logic, neural network methodology significantly while basic science of medicine using neural-networks-genetic algorithm most frequently and preferably. There is unavoidable interest shown by medical scientists to use the various soft computing methodologies in genetics, physiology, radiology, cardiology and neurology discipline. CBSE boost users to reuse the past and existing software for making new products to provide quality with a saving of time, memory space, and money. This paper focused on assessment of commonly used soft computing technique like Genetic Algorithm (GA), Neural-Network (NN), Fuzzy Logic, Support Vector Machine (SVM), Ant Colony Optimization (ACO), Particle Swarm Optimization (PSO), and Artificial Bee Colony (ABC). This paper presents working of soft computing

  16. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1: ASC software quality engineering practices, Version 2.0.

    Energy Technology Data Exchange (ETDEWEB)

    Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Minana, Molly A.; Hackney, Patricia; Forsythe, Christi A.; Schofield, Joseph Richard, Jr. (,; .); Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2006-09-01

    The purpose of the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. The plan defines the ASC program software quality practices and provides mappings of these practices to Sandia Corporate Requirements CPR 1.3.2 and 1.3.6 and to a Department of Energy document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines. This document also identifies ASC management and software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals.

  17. Knowledge base methodology: Methodology for first Engineering Script Language (ESL) knowledge base

    Science.gov (United States)

    Peeris, Kumar; Izygon, Michel E.

    1992-01-01

    The primary goal of reusing software components is that software can be developed faster, cheaper and with higher quality. Though, reuse is not automatic and can not just happen. It has to be carefully engineered. For example a component needs to be easily understandable in order to be reused, and it has also to be malleable enough to fit into different applications. In fact the software development process is deeply affected when reuse is being applied. During component development, a serious effort has to be directed toward making these components as reusable. This implies defining reuse coding style guidelines and applying then to any new component to create as well as to any old component to modify. These guidelines should point out the favorable reuse features and may apply to naming conventions, module size and cohesion, internal documentation, etc. During application development, effort is shifted from writing new code toward finding and eventually modifying existing pieces of code, then assembling them together. We see here that reuse is not free, and therefore has to be carefully managed.

  18. Closing the loop on improvement: Packaging experience in the Software Engineering Laboratory

    Science.gov (United States)

    Waligora, Sharon R.; Landis, Linda C.; Doland, Jerry T.

    1994-01-01

    As part of its award-winning software process improvement program, the Software Engineering Laboratory (SEL) has developed an effective method for packaging organizational best practices based on real project experience into useful handbooks and training courses. This paper shares the SEL's experience over the past 12 years creating and updating software process handbooks and training courses. It provides cost models and guidelines for successful experience packaging derived from SEL experience.

  19. Applying the Tropos Methodology for Analysing Web Services Requirements and Reasoning about Qualities of Services

    NARCIS (Netherlands)

    Aiello, Marco; Giorgini, Paolo

    2004-01-01

    The shift in software engineering from the design, implementation and management of isolated software elements towards a network of autonomous interoperable service is calling for a shift in the way software is designed. We propose the use of the agent-oriented methodology Tropos for the analysis of

  20. FOREIGN LANGUAGE AS A MEANS OF COMMUNICATIVE COMPETENCE DEVELOPMENT OF FUTURE SOFTWARE ENGINEERS

    Directory of Open Access Journals (Sweden)

    Viacheslav V. Osadchyi

    2017-04-01

    Full Text Available The article deals with the problem of foreign language teaching for future software engineers in higher educational establishments. Requirements of employers to applicants for engineering positions as to their linguistic competence are analyzed. Communicative competence requirements for graduates of higher educational establishments according to national branch standards for software and computer engineers are highlighted. The results of the curricula analysis of the leading national universities as to foreign language teaching are given. The aim and the contents of “English for professional purpose” course are presented, as well as described procedural guidelines of the course, its aim, structure and contents; considered some aspects of information and consultation support.

  1. 2016 International Conference on Software Process Improvement

    CERN Document Server

    Muñoz, Mirna; Rocha, Álvaro; Feliu, Tomas; Peña, Adriana

    2017-01-01

    This book offers a selection of papers from the 2016 International Conference on Software Process Improvement (CIMPS’16), held between the 12th and 14th of October 2016 in Aguascalientes, Aguascalientes, México. The CIMPS’16 is a global forum for researchers and practitioners to present and discuss the most recent innovations, trends, results, experiences and concerns in the different aspects of software engineering with a focus on, but not limited to, software processes, security in information and communication technology, and big data. The main topics covered include: organizational models, standards and methodologies, knowledge management, software systems, applications and tools, information and communication technologies and processes in non-software domains (mining, automotive, aerospace, business, health care, manufacturing, etc.) with a clear focus on software process challenges.

  2. Design Methodology of Camshaft Driven Charge Valves for Pneumatic Engine Starts

    Directory of Open Access Journals (Sweden)

    Moser Michael M.

    2015-01-01

    Full Text Available Idling losses constitute a significant amount of the fuel consumption of internal combustion engines. Therefore, shutting down the engine during idling phases can improve its overall efficiency. For driver acceptance a fast restart of the engine must be guaranteed. A fast engine start can be performed using a powerful electric starter and an appropriate battery which are found in hybrid electric vehicles, for example. However, these devices involve additional cost and weight. An alternative method is to use a tank with pressurized air that can be injected directly into the cylinders to start the engine pneumatically. In this paper, pneumatic engine starts using camshaft driven charge valves are discussed. A general methodology for an air-optimal charge valve design is presented which can deal with various requirements. The proposed design methodology is based on a process model representing pneumatic engine operation. A design example for a two-cylinder engine is shown, and the resulting optimized pneumatic start is experimentally verified on a test bench engine. The engine’s idling speed of 1200 rpm can be reached within 350 ms for an initial pressure in the air tank of 10 bar. A detailed system analysis highlights the characteristics of the optimal design found.

  3. Software engineering aspects of real-time programming concepts

    Science.gov (United States)

    Schoitsch, Erwin

    1986-08-01

    Real-time programming is a discipline of great importance not only in process control, but also in fields like communication, office automation, interactive databases, interactive graphics and operating systems development. General concepts of concurrent programming and constructs for process-synchronization are discussed in detail. Tasking and synchronization concepts, methods of process communication, interrupt and timeout handling in systems based on semaphores, signals, conditional critical regions or on real-time languages like Concurrent PASCAL, MODULA, CHILL and ADA are explained and compared with each other. The second part deals with structuring and modularization of technical processes to build reliable and maintainable real time systems. Software-quality and software engineering aspects are considered throughout the paper.

  4. Applying object-oriented software engineering at the BaBar collaboration

    International Nuclear Information System (INIS)

    Jacobsen, B.

    1997-01-01

    The BaBar experiment at SLAC will start taking data in 1999. We are attempting to build its reconstruction software using good software engineering practices, including the use of object-oriented technology. We summarize our experience to date with analysis and design activities, training, CASE and documentation tools, C++ programming practice and similar topics. The emphasis is on the practical issues of simultaneously introducing new techniques to a large collaboration while under a deadline for system delivery. (orig.)

  5. Automation of the software production process for multiple cryogenic control applications

    OpenAIRE

    Fluder, Czeslaw; Lefebvre, Victor; Pezzetti, Marco; Plutecki, Przemyslaw; Tovar-González, Antonio; Wolak, Tomasz

    2018-01-01

    The development of process control systems for the cryogenic infrastructure at CERN is based on an automatic software generation approach. The overall complexity of the systems, their frequent evolution as well as the extensive use of databases, repositories, commercial engineering software and CERN frameworks have led to further efforts towards improving the existing automation based software production methodology. A large number of control system upgrades were successfully performed for th...

  6. Software Engineering and Swarm-Based Systems

    Science.gov (United States)

    Hinchey, Michael G.; Sterritt, Roy; Pena, Joaquin; Rouff, Christopher A.

    2006-01-01

    We discuss two software engineering aspects in the development of complex swarm-based systems. NASA researchers have been investigating various possible concept missions that would greatly advance future space exploration capabilities. The concept mission that we have focused on exploits the principles of autonomic computing as well as being based on the use of intelligent swarms, whereby a (potentially large) number of similar spacecraft collaborate to achieve mission goals. The intent is that such systems not only can be sent to explore remote and harsh environments but also are endowed with greater degrees of protection and longevity to achieve mission goals.

  7. Intelligent systems engineering methodology

    Science.gov (United States)

    Fouse, Scott

    1990-01-01

    An added challenge for the designers of large scale systems such as Space Station Freedom is the appropriate incorporation of intelligent system technology (artificial intelligence, expert systems, knowledge-based systems, etc.) into their requirements and design. This presentation will describe a view of systems engineering which successfully addresses several aspects of this complex problem: design of large scale systems, design with requirements that are so complex they only completely unfold during the development of a baseline system and even then continue to evolve throughout the system's life cycle, design that involves the incorporation of new technologies, and design and development that takes place with many players in a distributed manner yet can be easily integrated to meet a single view of the requirements. The first generation of this methodology was developed and evolved jointly by ISX and the Lockheed Aeronautical Systems Company over the past five years on the Defense Advanced Research Projects Agency/Air Force Pilot's Associate Program, one of the largest, most complex, and most successful intelligent systems constructed to date. As the methodology has evolved it has also been applied successfully to a number of other projects. Some of the lessons learned from this experience may be applicable to Freedom.

  8. Development of a Graphical Tool to integrate the Prometheus AEOlus methodology and Jason Platform

    Directory of Open Access Journals (Sweden)

    Rafhael CUNHA

    2017-07-01

    Full Text Available Software Engineering (SE is an area that intends to build high-quality software in a systematic way. However, traditional software engineering techniques and methods do not support the demand for developing Multiagent Systems (MAS. Therefore a new subarea has been studied, called Agent Oriented Software Engineering (AOSE. The AOSE area proposes solutions to issues related to the development of agent oriented systems. There is still no standardization in this subarea, resulting in several methodologies. Another issue of this subarea is that there are very few tools that are able to automatically generate code. In this work we propose a tool to support the Prometheus AEOlus Methodology because it provides modelling artifacts to all MAS dimensions: agents, environment, interaction, and organization. The tool supports all Prometheus AEOlus artifacts and can automatically generated code to the agent and interaction dimensions in the AgentSpeak Language, which is the language used in the Jason Platform. We have done some validations with the proposed tool and a case study is presented.

  9. The mythical man-month essays on software engineering

    CERN Document Server

    Brooks, Frederick Phillips

    1995-01-01

    Few books on software project management have been as influential and timeless as The Mythical Man-Month. With a blend of software engineering facts and thought-provoking opinions, Fred Brooks offers insight for anyone managing complex projects. These essays draw from his experience as project manager for the IBM System/360 computer family and then for OS/360, its massive software system. Now, 20 years after the initial publication of his book, Brooks has revisited his original ideas and added new thoughts and advice, both for readers already familiar with his work and for readers discovering it for the first time. The added chapters contain (1) a crisp condensation of all the propositions asserted in the original book, including Brooks' central argument in The Mythical Man-Month: that large programming projects suffer management problems different from small ones due to the division of labor; that the conceptual integrity of the product is therefore critical; and that it is difficult but possible to achi...

  10. Real-time Kernel Implementation Practice Program for Embedded Software Engineers' Education and its Evaluation

    Science.gov (United States)

    Yoshida, Toshio; Matsumoto, Masahide; Seo, Katsuhiko; Chino, Shinichiro; Sugino, Eiji; Sawamoto, Jun; Koizumi, Hisao

    A real-time kernel (henceforth RTK) is in the center place of embedded software technology, and the understanding of RTK is indispensable for the embedded system design. To implement RTK, it is necessary to understand languages that describe RTK software program code, system programming manners, software development tools, CPU on that RTK runs and the interface between software and hardware, etc. in addition to understanding of RTK itself. This means RTK implementation process largely covers embedded software implementation process. Therefore, it is thought that RTK implementation practice program is very effective as a means of the acquisition of common embedded software skill in addition to deeper acquisition of RTK itself. In this paper, we propose to apply RTK implementing practice program to embedded software engineers educational program. We newly developed very small and step-up type RTK named μK for educational use, and held a seminar that used μK as a teaching material for the students of information science and engineers of the software house. As a result, we confirmed that RTK implementation practice program is very effective for the acquisition of embedded software common skill.

  11. Some recent developments in treatment planning software and methodology for BNCT

    International Nuclear Information System (INIS)

    Nigg, D.W.; Wheeler, F.J.; Wessol, D.E.; Wemple, C.A.; Babcock, R.; Capala, J.

    1996-01-01

    Over the past several years/the Idaho National Engineering Laboratory (INEL) has led the development of a unique, internationally-recognized set of software modules (BNCT rtpe) for computational dosimetry and treatment planning for Boron Neutron Capture Therapy (BNCT). The computational capability represented by this software is essential to the proper administration of all forms of radiotherapy for cancer. Such software addresses the need to perform pretreatment computation and optimization of the radiation dose distribution in the target volume. This permits the achievement of the optimal therapeutic ratio (tumor dose relative to critical normal tissue dose) for each individual patient via a systematic procedure for specifying the appropriate irradiation parameters to be employed for a given treatment. These parameters include angle of therapy beam incidence, beam aperture and shape,and beam intensity as a function of position across the beam front. The INEL software is used for treatment planning in the current series of human glioma trials at Brookhaven National Laboratory (BNL) and has also been licensed for research and developmental purposes to several other BNCT research centers in the US and in Europe

  12. Some recent developments in treatment planning software and methodology for BNCT

    International Nuclear Information System (INIS)

    Nigg, D.W.; Wheeler, F.J.; Wessol, D.E.

    1996-01-01

    Over the past several years the Idaho National Engineering Laboratory (INEL) has led the development of a unique, internationally-recognized set of software modules (BNCT-rtpe) for computational dosimetry and treatment planning for Boron Neutron Capture Therapy (BNCT). The computational capability represented by this software is essential to the proper administration of all forms of radiotherapy for cancer. Such software addresses the need to perform pretreatment computation and optimization of the radiation dose distribution in the target volume. This permits the achievement of the optimal therapeutic ratio (tumor dose relative to critical normal tissue dose) for each individual patient via a systematic procedure for specifying the appropriate irradiation parameters to be employed for a given treatment. These parameters include angle of therapy beam incidence, beam aperture and shape, and beam intensity as a function of position across the beam front. The INEL software is used for treatment planning in the current series of human glioma trials at Brookhaven National Laboratory (BNL) and has also been licensed for research and developmental purposes to several other BNCT research centers in the US and in Europe

  13. Establishing a Ballistic Test Methodology for Documenting the Containment Capability of Small Gas Turbine Engine Compressors

    Science.gov (United States)

    Heady, Joel; Pereira, J. Michael; Ruggeri, Charles R.; Bobula, George A.

    2009-01-01

    A test methodology currently employed for large engines was extended to quantify the ballistic containment capability of a small turboshaft engine compressor case. The approach involved impacting the inside of a compressor case with a compressor blade. A gas gun propelled the blade into the case at energy levels representative of failed compressor blades. The test target was a full compressor case. The aft flange was rigidly attached to a test stand and the forward flange was attached to a main frame to provide accurate boundary conditions. A window machined in the case allowed the projectile to pass through and impact the case wall from the inside with the orientation, direction and speed that would occur in a blade-out event. High-peed, digital-video cameras provided accurate velocity and orientation data. Calibrated cameras and digital image correlation software generated full field displacement and strain information at the back side of the impact point.

  14. Guest editors' introduction to the first issue on Experimental Software Engineering in the Cloud (ESEiC)

    NARCIS (Netherlands)

    Van Gorp, P.M.E.; Rose, L.M.

    2014-01-01

    This inaugural Special Issue on Experimental Software Engineering in the Cloud (ESEiC) demonstrates a novel, cloud-based approach to the empirical evaluation of software engineering tools. The issue contains two papers that are the result of long term research efforts by multiple authors. Both

  15. Cooperative and Human Aspects of Software Engineering (CHASE 2008)

    DEFF Research Database (Denmark)

    2008-01-01

    ethnographic research to experiments. Moreover, the background of attendees reflects the diversity of researchers in this domain, ranging from sociology to psychology, from informatics to software engineering. CHASE 1008 met its goals in presenting high-quality research and building community through a mixture...... of presentations, discussions, posters, and social activities....

  16. Software for Engineering Simulations of a Spacecraft

    Science.gov (United States)

    Shireman, Kirk; McSwain, Gene; McCormick, Bernell; Fardelos, Panayiotis

    2005-01-01

    Spacecraft Engineering Simulation II (SES II) is a C-language computer program for simulating diverse aspects of operation of a spacecraft characterized by either three or six degrees of freedom. A functional model in SES can include a trajectory flight plan; a submodel of a flight computer running navigational and flight-control software; and submodels of the environment, the dynamics of the spacecraft, and sensor inputs and outputs. SES II features a modular, object-oriented programming style. SES II supports event-based simulations, which, in turn, create an easily adaptable simulation environment in which many different types of trajectories can be simulated by use of the same software. The simulation output consists largely of flight data. SES II can be used to perform optimization and Monte Carlo dispersion simulations. It can also be used to perform simulations for multiple spacecraft. In addition to its generic simulation capabilities, SES offers special capabilities for space-shuttle simulations: for this purpose, it incorporates submodels of the space-shuttle dynamics and a C-language version of the guidance, navigation, and control components of the space-shuttle flight software.

  17. Uniframe: A Unified Framework for Developing Service-Oriented, Component-Based Distributed Software Systems

    National Research Council Canada - National Science Library

    Raje, Rajeev R; Olson, Andrew M; Bryant, Barrett R; Burt, Carol C; Auguston, Makhail

    2005-01-01

    .... It describes how this approach employs a unifying framework for specifying such systems to unite the concepts of service-oriented architectures, a component-based software engineering methodology...

  18. Software Engineering Program: Software Process Improvement Guidebook

    Science.gov (United States)

    1996-01-01

    The purpose of this document is to provide experience-based guidance in implementing a software process improvement program in any NASA software development or maintenance community. This guidebook details how to define, operate, and implement a working software process improvement program. It describes the concept of the software process improvement program and its basic organizational components. It then describes the structure, organization, and operation of the software process improvement program, illustrating all these concepts with specific NASA examples. The information presented in the document is derived from the experiences of several NASA software organizations, including the SEL, the SEAL, and the SORCE. Their experiences reflect many of the elements of software process improvement within NASA. This guidebook presents lessons learned in a form usable by anyone considering establishing a software process improvement program within his or her own environment. This guidebook attempts to balance general and detailed information. It provides material general enough to be usable by NASA organizations whose characteristics do not directly match those of the sources of the information and models presented herein. It also keeps the ideas sufficiently close to the sources of the practical experiences that have generated the models and information.

  19. Training in software used by practising engineers should be included in university curricula

    Science.gov (United States)

    Silveira, A.; Perdigones, A.; García, J. L.

    2009-04-01

    Deally, an engineering education should prepare students, i.e., emerging engineers, to use problem-solving processes that synergistically combine creativity and imagination with rigour and discipline. Recently, pressures on curricula have resulted in the development of software-specific courses, often to the detriment of the understanding of theory [1]. However, it is also true that there is a demand for information technology courses by students other than computer science majors [2]. The emphasis on training engineers may be best placed on answering the needs of industry; indeed, many proposals are now being made to try to reduce the gap between the educational and industrial communities [3]. Training in the use of certain computer programs may be one way of better preparing engineering undergraduates for eventual employment in industry. However, industry's needs in this respect must first be known. The aim of this work was to determine which computer programs are used by practising agricultural engineers with the aim of incorporating training in their use into our department's teaching curriculum. The results showed that 72% of their working hours involved the use computer programs. The software packages most commonly used were Microsoft Office (used by 79% of respondents) and CAD (56%), as well as budgeting (27%), statistical (21%), engineering (15%) and GIS (13%) programs. As a result of this survey our university department opened an additional computer suite in order to provide students practical experience in the use of Microsoft Excel, budgeting and engineering software. The results of this survey underline the importance of computer software training in this and perhaps other fields of engineering. [1] D. J. Moore, and D. R. Voltmer, "Curriculum for an engineering renaissance," IEEE Trans. Educ., vol. 46, pp. 452-455, Nov. 2003. [2] N. Kock, R. Aiken, and C. Sandas, "Using complex IT in specific domains: developing and assessing a course for nonmajors

  20. Crossing the borders and the cultural gaps for educating PhDs in software engineering

    DEFF Research Database (Denmark)

    Sørensen, Lene Tolstrup; Knutas, Antti; Seffah, Ahmed

    2017-01-01

    PhDs and educators. While large universities and research centres have the required expertise and infrastructure to providing a cost-effective training by research as well as covering wide spectrum of software engineering topics, the situation in small universities with limited resources...... is challenging. This is even more difficult for some countries where the discipline of software engineering is totally new, which is the case of emerging countries. This paper describes the Pathways to PhDs project funded by the European Commission. The long-term aim is to support the development, modernization...... and international visibility and excellence of higher education, namely education by research at the PhD level in Europe, while helping partner countries to develop new PhD programs and consolidate existing ones in the field of computing in the area of software engineering. This paper presents the creation...