The effects of different types of taxes on soft-drink consumption

DEFF Research Database (Denmark)

Sheikhbihi Adam, Abdulfatah; Smed, Sinne

as well as between different container sizes. Especially the large sizes and discount brands provide considerable value for money to the consumer. Three different type of taxes is considered; a tax based on the content of added sugar in various SSB’s, a flat tax on soft-drinks alone and a size...... though detrimental health effects in terms of increased intake of diet soft-drinks has to be considered. A flat tax on soft-drinks decrease the intake of sugar, but leave total calorie intake unaltered due to substitution with other SSB’s. A tax aimed at removing the value added from purchasing large...... differentiated tax on soft-drinks that remove the value for money obtained by purchasing large container sizes. The scenarios are scaled equally in terms of obtained public revenue. Largest effect in terms of reduced intake of calories and sugar are obtained by applying the tax on sugar in all beverages, even...

An analysis of the potassium concentrations of soft drinks by HPGe gamma spectrometry

International Nuclear Information System (INIS)

Guillermo Espinosa; Jose-Ignacio Golzarri; Ilsa Hernandez-Ibinarriaga

2009-01-01

Potassium, in a variety of compounds, occurs in abundance in the Earth's crust, and is an essential nutrient for human health. A naturally occurring radioactive isotope of potassium, 40 K, is found in the food and water that we consume. This paper presents the results of a gamma spectrometry analysis of the 40 K concentrations of a selection of commercial soft drinks. The 40 K concentrations are used to calculate the overall potassium concentrations. The analysis was carried out using a hyper-pure germanium (HPGe) detector with Ortec R ASPEC-927 multichannel analyzer module and GammaVision R software. This system was chosen for its high resolution and automatic data processing. The carbonated soft drinks (sodas) Coca-Cola R , Coca-Cola Light R (sold as Diet Coke R in the USA and other countries), Coca-Cola Zero R , Pepsi R , Pepsi Light R , Pepsi Max R , Big Cola R , Lulu-Cola R , Manzana Lift R , Sprite R and Fanta R and the mineral waters Ciel R and Penafiel R were analyzed. These brands are all international registered trademarks. The products analyzed were manufactured and bottled in Mexico. The results show a great variety of potassium concentrations in the different soft drinks analyzed (from 128.0 to 1113.1 mg/L). The concentration of potassium in the sodas, in conjunction with the amounts drank by one person in a year (180 L/year), are high enough to warrant consideration by public health authorities and by people to whom high potassium intakes pose a risk. (author)

Price elasticity of the demand for sugar sweetened beverages and soft drinks in Mexico.

Science.gov (United States)

Colchero, M A; Salgado, J C; Unar-Munguía, M; Hernández-Ávila, M; Rivera-Dommarco, J A

2015-12-01

A large and growing body of scientific evidence demonstrates that sugar drinks are harmful to health. Intake of sugar-sweetened beverages (SSB) is a risk factor for obesity and type 2 diabetes. Mexico has one of the largest per capita consumption of soft drinks worldwide and high rates of obesity and diabetes. Fiscal approaches such as taxation have been recommended as a public health policy to reduce SSB consumption. We estimated an almost ideal demand system with linear approximation for beverages and high-energy food by simultaneous equations and derived the own and cross price elasticities for soft drinks and for all SSB (soft drinks, fruit juices, fruit drinks, flavored water and energy drinks). Models were stratified by income quintile and marginality index at the municipality level. Price elasticity for soft drinks was -1.06 and -1.16 for SSB, i.e., a 10% price increase was associated with a decrease in quantity consumed of soft drinks by 10.6% and 11.6% for SSB. A price increase in soft drinks is associated with larger quantity consumed of water, milk, snacks and sugar and a decrease in the consumption of other SSB, candies and traditional snacks. The same was found for SSB except that an increase in price of SSB was associated with a decrease in snacks. Higher elasticities were found among households living in rural areas (for soft drinks), in more marginalized areas and with lower income. Implementation of a tax to soft drinks or to SSB could decrease consumption particularly among the poor. Substitutions and complementarities with other food and beverages should be evaluated to assess the potential impact on total calories consumed. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

Diet Soft Drink Consumption is Associated with the Metabolic Syndrome: A Two Sample Comparison

Directory of Open Access Journals (Sweden)

Georgina Crichton

2015-05-01

Full Text Available Comparative analyses of soft drink intakes in samples from the United States and Europe, and assessed intakes in relation to prevalence of metabolic syndrome (MetS and its individual components are currently lacking. We used data collected on cardiovascular health and dietary intakes in participants from two cross-sectional studies: the Maine-Syracuse Longitudinal Study (MSLS, conducted in Central New York, USA in 2001–2006 (n = 803, and the Observation of Cardiovascular Risk Factors in Luxembourg Study (ORISCAV-LUX, conducted in 2007–2009 (n = 1323. Odds ratios for MetS were estimated according to type and quantity of soft drink consumption, adjusting for demographic, lifestyle and dietary factors, in both studies. In both studies, individuals who consumed at least one soft drink per day had a higher prevalence of MetS, than non-consumers. This was most evident for consumers of diet soft drinks, consistent across both studies. Diet soft drink intakes were also positively associated with waist circumference and fasting plasma glucose in both studies. Despite quite different consumption patterns of diet versus regular soft drinks in the two studies, findings from both support the notion that diet soft drinks are associated with a higher prevalence of MetS.

Biochemical monitoring of sweet fruit flavoured glass bottled soft drinks

International Nuclear Information System (INIS)

Watto, M.H.S.; Kazi, T.G.; Bhanger, M.I.; Jakhrani, M.A.; Iqbal, J.; Porgar, A.S.

2000-01-01

Fruit flavored glass bottled soft drinks are widely used in developing countries including Pakistan. People suffer greatly both in terms of health and economy if soft drinks are contaminated with microbes and toxic metals. Samples of sixteen different brands of soft drinks were analyzed for microbial and trace elemental study. Microbial study included identification of different coliforms like E. coli, Bacillus cereus, Salmonella, Shigella, Enterobacter, Klebsiela, and total Coliforms. Only seven samples were found to be free from investigated microbes. Contamination in other samples was probably due to improper handling and storage and could be dangerous to human health. Fifteen trace and toxic elements were determined by atomic absorption spectrophotometry following improved ash digestion method. The level of Al, Fe, Na, K, Ni, Pb and Cd was found to be higher in investigated samples than the international safety limits of WHO. Other elements investigated in all the samples were below the WHO maximum allowable concentration for drinking water. (author)

Soft Drink Vending Machines in Schools: A Clear and Present Danger

Science.gov (United States)

Price, James; Murnan, Judy; Moore, Bradene

2006-01-01

This paper examines the availability of soft drinks in schools ("pouring rights contracts") and its effects on the growing nutritional problems of American youth. Of special concern is the prevalence of overweight youth, which has been increasing at alarming rates. There has been a direct relationship found between soft drink consumption and…

Scalable manufacturing processes with soft materials

OpenAIRE

White, Edward; Case, Jennifer; Kramer, Rebecca

2014-01-01

The emerging field of soft robotics will benefit greatly from new scalable manufacturing techniques for responsive materials. Currently, most of soft robotic examples are fabricated one-at-a-time, using techniques borrowed from lithography and 3D printing to fabricate molds. This limits both the maximum and minimum size of robots that can be fabricated, and hinders batch production, which is critical to gain wider acceptance for soft robotic systems. We have identified electrical structures, ...

Mechanical behaviour of fibre reinforced concrete using soft - drink can

Science.gov (United States)

Ilya, J.; Cheow Chea, C.

2017-11-01

This research was carried out to study the behaviour of concrete, specifically compressive and flexural strength, by incorporating recycled soft drink aluminium can as fibre reinforcement in the concrete. Another aim of the research is to determine the maximum proportion of fibres to be added in the concrete. By following standard mix design, Ordinary Portland Cement (OPC) concrete was made to have a target mean strength of 30 N/mm2 with not more than 30 mm of slump. Having the same workability, OPC concrete with 0%, 1% and 2% of soft drink can aluminium fibre was prepared based on weight of cement. The specimens were tested for compressive strength and flexural strength. Laboratory test results based on short term investigation reveals that the compressive strength and flexural strength of concrete containing fibre are higher than of normal OPC concrete. Among two volume fractions, concrete with 1% of soft drink can fibre have performed better result in compressive strength and flexural strength compared with 2% amount of soft drink can fibre. The optimum proportion of aluminium fibre to be added in the concrete as fibre reinforcement is 1% fibre content by weight of cement which gave all the positive response from all the tests conducted.

[Epidemiological evaluation of soft drinks consumption--students surveys].

Science.gov (United States)

Chłapowska, Joanna; Pawlaczyk-Kamieńska, Tamara

2012-01-01

Non carious lesions, including erosion changes, are becoming increasingly apparent. There are multiple factors involved in the etiology of dental erosion i.a. acids in commercially available drinks. The aim of this study was to determine the frequency of soft drink consumption that promote dental erosion among young adults. The 266 subjects were asked to fill in a questionnaire. The questionnaire inquired questions about consumption of drinks favouring tooth erosion. The students declared frequent drinking of isotonic drinks, energetic drinks, fizzy drinks and coca-cola type drinks. On the basis of a survey of Poznań University of Medical Sciences students it can be determined, that they have relatively high risk of dental erosion. To minimize the risk of dental erosion occurrence in young population there is a need to disseminate knowledge about the etiology.

Application of multibounce attenuated total reflectance fourier transform infrared spectroscopy and chemometrics for determination of aspartame in soft drinks.

Science.gov (United States)

Khurana, Harpreet Kaur; Cho, Il Kyu; Shim, Jae Yong; Li, Qing X; Jun, Soojin

2008-02-13

Aspartame is a low-calorie sweetener commonly used in soft drinks; however, the maximum usage dose is limited by the U.S. Food and Drug Administration. Fourier transform infrared (FTIR) spectroscopy with attenuated total reflectance sampling accessory and partial least-squares regression (PLS) was used for rapid determination of aspartame in soft drinks. On the basis of spectral characterization, the highest R2 value, and lowest PRESS value, the spectral region between 1600 and 1900 cm(-1) was selected for quantitative estimation of aspartame. The potential of FTIR spectroscopy for aspartame quantification was examined and validated by the conventional HPLC method. Using the FTIR method, aspartame contents in four selected carbonated diet soft drinks were found to average from 0.43 to 0.50 mg/mL with prediction errors ranging from 2.4 to 5.7% when compared with HPLC measurements. The developed method also showed a high degree of accuracy because real samples were used for calibration, thus minimizing potential interference errors. The FTIR method developed can be suitably used for routine quality control analysis of aspartame in the beverage-manufacturing sector.

Cytotoxicity and mutagenicity of cola and grape flavored soft drinks in bone marrow cells of rodents

Directory of Open Access Journals (Sweden)

Elisângela Düsman

2013-03-01

Full Text Available Due to the large consumption of soft drinks in Brazil and worldwide in recent years and considering that some of the components present in their composition pose potential risks to human health, the aim of this study was to evaluate the cytotoxic and mutagenic potential of specific cola and grape-flavored soft drink brands. Bone marrow cells of Wistar rats were initially treated by gavage with one single dose of Cola or Grape soft drink, which was next offered ad libitum (instead of water for 24 hours. A negative control treatment was performed by administering one single dose of water and a positive control administering cyclophosphamide intraperitoneally. Statistical analysis showed that the Cola and Grape soft drinks studied were not cytotoxic. However, the Cola soft drink proved mutagenic in this experiment treatment time. Therefore, this study serves as a warning about the consumption of Cola-flavored soft drink and for the need for further subchronic and chronic studies on soft drinks in order to evaluate the long term mutagenic and cytotoxic effects of these substances.

Satiety scores and satiety hormone response after sucrose-sweetened soft drink compared with isocaloric semi-skimmed milk and with non-caloric soft drink

DEFF Research Database (Denmark)

Nielsen, Maria Mærsk; Sparre, Anita Belza; Holst, Jens Juul

2012-01-01

Observational studies indicate that sugar-sweetened soft drinks (SSSD) may promote obesity, among other factors, owing to low-satiating effects. The effect of energy in drinks on appetite is still unclear. We examined the effect of two isocaloric, but macronutrient, different beverages (SSSD versus...

Sweetness flavour interactions in soft drinks.

NARCIS (Netherlands)

Nahon, D.F.; Roozen, J.P.; Graaf, de C.

1996-01-01

Sucrose can be substituted by intense sweeteners to lower the calorie content of soft drinks. Although the sweetness is kept at the same level as much as possible, the flavour of the product often changes. This change could be due to both the mechanism of sensory perception and interactive effects

Neural responsivity during soft drink intake, anticipation, and advertisement exposure in habitually consuming youth

Science.gov (United States)

Burger, Kyle S.; Stice, Eric

2014-01-01

OBJECTIVE Although soft drinks are heavily advertised, widely consumed, and have been associated with obesity, little is understood regarding neural responsivity to soft drink intake, anticipated intake, and advertisements. METHODS Functional MRI was used to assess examine neural response to carbonated soft drink intake, anticipated intake and advertisement exposure as well as milkshake intake in 27 adolescents that varied on soft drink consumer status. RESULTS Intake and anticipated intake of carbonated Coke® activated regions implicated in gustatory, oral somatosensory, and reward processing, yet high-fat/sugar milkshake intake elicited greater activation in these regions versus Coke intake. Advertisements highlighting the Coke product vs. non-food control advertisements, but not the Coke logo, activated gustatory and visual brain regions. Habitual Coke consumers vs. non-consumers showed greater posterior cingulate responsivity to Coke logo ads, suggesting that the logo is a conditioned cue. Coke consumers exhibited less ventrolateral prefrontal cortex responsivity during anticipated Coke intake relative to non-consumers. CONCLUSIONS Results indicate that soft drinks activate reward and gustatory regions, but are less potent in activating these regions than high-fat/sugar beverages, and imply that habitual soft drink intake promotes hyper-responsivity of regions encoding salience/attention toward brand specific cues and hypo-responsivity of inhibitory regions while anticipating intake. PMID:23836764

Neural responsivity during soft drink intake, anticipation, and advertisement exposure in habitually consuming youth.

Science.gov (United States)

Burger, Kyle S; Stice, Eric

2014-02-01

Although soft drinks are heavily advertised, widely consumed, and have been associated with obesity, little is understood regarding neural responsivity to soft drink intake, anticipated intake, and advertisements. Functional MRI was used to assess examine neural response to carbonated soft drink intake, anticipated intake and advertisement exposure as well as milkshake intake in 27 adolescents that varied on soft drink consumer status. Intake and anticipated intake of carbonated Coke® activated regions implicated in gustatory, oral somatosensory, and reward processing, yet high-fat/sugar milkshake intake elicited greater activation in these regions vs. Coke intake. Advertisements highlighting the Coke product vs. nonfood control advertisements, but not the Coke logo, activated gustatory and visual brain regions. Habitual Coke consumers vs. nonconsumers showed greater posterior cingulate responsivity to Coke logo ads, suggesting that the logo is a conditioned cue. Coke consumers exhibited less ventrolateral prefrontal cortex responsivity during anticipated Coke intake relative to nonconsumers. Results indicate that soft drinks activate reward and gustatory regions, but are less potent in activating these regions than high-fat/sugar beverages, and imply that habitual soft drink intake promotes hyper-responsivity of regions encoding salience/attention toward brand specific cues and hypo-responsivity of inhibitory regions while anticipating intake. Copyright © 2013 The Obesity Society.

Migration of Phthalates from Plastic Containers into Soft Drinks and Mineral Water

Directory of Open Access Journals (Sweden)

Jasna Bošnir

2007-01-01

Full Text Available The aim of this study was to determine the level of phthalate migration from plastic containers to soft drinks and mineral water and to identify a possible relationship between the amount and type of phthalate migration, type of preservative used, and the pH of the sample. The analysis included 45 samples of products packed in containers made from polyethylene terephthalate. The samples were divided into 5 groups: group 1 (N=9, soft drinks preserved with orthophosphoric acid; group 2 (N=14, soft drinks preserved with Na-benzoate; group 3 (N=5, soft drinks preserved with K-sorbate; group 4 (N=8, soft drinks preserved with a combination of Na-benzoate and K-sorbate; and group 5 (N=9, mineral water without preservatives. The samples were analyzed by the method of gas chromatography, with a detection limit of 0.005 μg/L. The mean pool phthalate level and mean pH value were 91.67 μg/L and 2.82±0.30 in group 1; 116.93 μg/L and 2.75±0.32 in group 2; 819.40 μg/L and 2.88±0.15 in group 3; 542.63 μg/L and 2.82±0.54 in group 4; and 20.22 μg/L and 5.82±1.26 in group 5, respectively. The highest rate of migration to soft drinks was recorded for dimethyl phthalate, ranging from 53.51 to 92.73 %, whereas dibutyl phthalate and diethylhexyl phthalate showed highest rate of migration to the mineral water (56.04 and 43.42 %, respectively. The highest level of phthalate migration from plastic containers to soft drinks was found in the products preserved with K-sorbate. The rate of phthalate migration appears to be influenced also by the drink pH, i.e. the lower the pH value, the greater the phthalate migration. Dimethyl phthalate showed highest migration to preserved drinks as an acidic medium, which might stimulate modification in the composition of plastic containers according to the type and composition of the product. Additional studies in a greater number of samples are needed. Although the phthalate levels measured in these samples pose no risk for

Preliminary studies on the use of kolanuts (cola nitida) for soft drink ...

African Journals Online (AJOL)

The fresh nuts (seeds) of kola (Cola nitida) were used in the preparation of kola soft drink. Proximate analysis of the nut was carried out to determine its moisture, ash, protein, carbohydrate, fat and caffeine contents. The pH, total solids, specific gravity, caffeine and sensory attributes of the developed kola soft drink were ...

Effect of soft drinks on the release of calcium from enamel surfaces.

Science.gov (United States)

Rirattanapong, Praphasri; Vongsavan, Kadkao; Surarit, Rudee

2013-09-01

Continuous consumption of soft drinks is the main cause of potential oral health problems, including dental caries and erosion. The purpose of this study was to compare the effect of three different types of soft drinks on the release of calcium from the enamel surface of teeth. Forty bovine teeth were selected for the experiment. They were divided into four groups (n=10/group): Group 1 (Coke), Group 2 (Pepsi), Group 3 (Sprite), and Group 4 (distilled water, the control). The pH of each beverage was measured using a pH meter. The release of calcium ions was measured using an atomic absorption spectrophotometer at baseline, 15, 30, and 60 minutes. The results were assessed by analysis of variance and then by the Tukey test (pPepsi, and Sprite showed no significant mean differences in the calcium released, but there was a significant mean difference of these soft drinks with distilled water at 60 minutes. We concluded that prolonged exposure to soft drinks could lead to significant enamel loss.

Water Consumption in European Children: Associations with Intake of Fruit Juices, Soft Drinks and Related Parenting Practices.

Science.gov (United States)

Mantziki, Krystallia; Renders, Carry M; Seidell, Jaap C

2017-05-31

Background : High intake of fruit juices and soft drinks contributes to excessive weight gain and obesity in children. Furthermore, parenting practices play an important role in the development of children's dietary habits. The way parents play this role in the development of their children's choices of beverages is still unclear. Objectives : To study the associations: (1) of both fruit juices and soft drinks consumption with water consumption of children and (2) The associations between parenting practices towards fruit juices and soft drinks and water consumption of children. Design : Cross-sectional data from 6 to 8 year old children from seven European communities ( n = 1187) were collected. Associations among fruit juices, soft drinks, the respective parenting practices and the child's water consumption were assessed by parental questionnaires. Results : The consumption of water was inversely associated with that of soft drinks but not with the consumption of fruit juices. The child's water intake was favorably influenced when stricter parenting practices towards soft drinks were adopted (e.g., less parental allowance, low home availability and high parental self-efficacy in managing intake). There was less influence observed of parenting practices towards fruit juices. Fruit juices were consumed more often than soft drinks. Conclusions : Low consumption of soft drinks-and not of fruit juices-was associated with high water consumption in children in the current study. Moreover, parenting practices towards both fruit juices and soft drinks were associated with the water intake of the children, irrespective of their socio-economic status.

Soft drink "pouring rights": marketing empty calories to children.

Science.gov (United States)

Nestle, M

2000-01-01

Healthy People 2010 objectives call for meals and snacks served in schools to contribute to overall diets that meet federal dietary guidelines. Sales in schools of foods and drinks high in calories and low in nutrients undermine this health objective, as well as participation in the more nutritious, federally sponsored, school lunch programs. Competitive foods also undermine nutrition information taught in the classroom. Lucrative contracts between school districts and soft drink companies for exclusive rights to sell one brand are the latest development in the increasing commercialization of school food. These contracts, intended to elicit brand loyalty among young children who have a lifetime of purchases ahead of them, are especially questionable because they place schools in the position of "pushing" soft drink consumption. "Pouring rights" contracts deserve attention from public health professionals concerned about the nutritional quality of children's diets.

Erosion of enamel by non-carbonated soft drinks with and without toothbrushing abrasion.

Science.gov (United States)

Hemingway, C A; Parker, D M; Addy, M; Barbour, M E

2006-10-07

To investigate how enamel loss due to erosion, and due to cycling of erosion and abrasion, depends on compositional parameters of soft drinks, and particularly whether the thickness of the erosive softened layer is a function of drink composition. University dental hospital research laboratory in the UK, 2004. Six drinks were chosen based on their popularity and composition: apple juice, orange juice, apple drink, orange drink, cranberry drink and 'ToothKind' blackcurrant drink. Group A samples (n = 36) were exposed to soft drinks at 36 degrees C for six consecutive 10 minute periods. Group B samples (n = 36) were subjected to alternating erosion and toothbrushing, repeated six times. Enamel loss was measured using optical profilometry. Group A: significant enamel loss was seen for all drinks (p composition of the erosive medium.

Effects of carbonated soft drink consumption on orthodontic tooth movements in rats.

Directory of Open Access Journals (Sweden)

Hossein Agha Aghili

2014-04-01

Full Text Available The aim of this animal study was to evaluate the possible effects of Carbonated Soft Drink consumption on the rate of orthodontic tooth movement in rats.Thirty-six adult male Sprague-Dawley rats were randomly divided into two experimental groups and one control group. In the experimental groups (A&B, the water in the dietary regimen was replaced with soft drinks (Fanta® in group A and Cola® in group B two weeks before placement of orthodontic appliances. Then 5-mm nickel-titanium closed-coil springs were placed between the maxillary right first molars and first incisors under general anesthesia. This regimen continued for two weeks more and animals drank soft drink ad libitum. At the end of the experimental period, the rats were sacrificed, and interproximal tooth movements were measured.The mean amounts of tooth movement were 0.19mm in group A, 0.22mm in group B and 0.37mm in group C. Statistical analysis with analysis of variance (ANOVA test showed significant differences between all groups. The least movement occurred in group A that had received Fanta® drink.CSDs consumption decreases the rate of orthodontic tooth movement. The role of soft drinks in decreasing tooth movement might be related to its effects on bone metabolism.

Point-of-purchase price and education intervention to reduce consumption of sugary soft drinks.

Science.gov (United States)

Block, Jason P; Chandra, Amitabh; McManus, Katherine D; Willett, Walter C

2010-08-01

We investigated whether a price increase on regular (sugary) soft drinks and an educational intervention would reduce their sales. We implemented a 5-phase intervention at the Brigham and Women's Hospital cafeteria in Boston, Massachusetts. After posting existing prices of regular and diet soft drinks and water during baseline, we imposed several interventions in series: a price increase of 35% on regular soft drinks, a reversion to baseline prices (washout), an educational campaign, and a combination price and educational period. We collected data from a comparison site, Beth Israel Deaconess Hospital, also in Boston, for the final 3 phases. Sales of regular soft drinks declined by 26% during the price increase phase. This reduction in sales persisted throughout the study period, with an additional decline of 18% during the combination phase compared with the washout period. Education had no independent effect on sales. Analysis of the comparison site showed no change in regular soft drink sales during the study period. A price increase may be an effective policy mechanism to decrease sales of regular soda. Further multisite studies in varied populations are warranted to confirm these results.

Taxing soft drinks and restricting access to vending machines to curb child obesity.

Science.gov (United States)

Fletcher, Jason M; Frisvold, David; Tefft, Nathan

2010-05-01

One of the largest drivers of the current obesity epidemic is thought to be excessive consumption of sugar-sweetened beverages. Some have proposed vending machine restrictions and taxing soft drinks to curb children's consumption of soft drinks; to a large extent, these policies have not been evaluated empirically. We examine these policies using two nationally representative data sets and find no evidence that, as currently practiced, either is effective at reducing children's weight. We conclude by outlining changes that may increase their effectiveness, such as implementing comprehensive restrictions on access to soft drinks in schools and imposing higher tax rates than are currently in place in many jurisdictions.

The structure of the soft drinks supply at the market of Yekaterinburg

Directory of Open Access Journals (Sweden)

M. P. Solov'eva

2017-01-01

Full Text Available Nowadays research of the regional markets and consumers’ preferences in the soft drinks segment are actual. This is associated with the saturation of the market and increasing competition within the segment. The research of the market is the base for the assessments of the prospects for the certain enterprise and for the sector development. Analysis of the assortment of the made and sold at the Yekaterin-burg soft drinks was realized. The article shows the position of the good relative to the all-marketing positions in the region. It has been established that assortment of the soft drinks is characterized by the diversity of the types and drinks on the basis of the aromatic staff prevail (41,6%, juice and juice-contained beverages (28,2%, mineral and drinkable bottled water (21,4% with different trademarks prevail. Leaders of the market are two big foreign companies. “Coca-Cola Company” with trademarks “Coca-cola”, “Fanta”, “Sprite”, “Nestea”, “Dobriy”, “Bon Aqua” and the company “Pepsi Co Russia” representing trademarks “Pepsi” “Mirinda”, “7up”, “Tonus”, “Russkiy Dar”. According to strength saturation with carbon dioxide medium carbonated drinks (40,4% and strong carbonated drinks (39,1% prevail. The light carbonated drinks are much smaller and account 13,5%, and non-carbonated drinks are the smallest part of the market (6,96%. The reason of that structure that the carbon dioxide is actively used by the soft drinks producers as a preservative, regulator of the acidity and antioxidant. The research of the package show that the producers use polymeric materials, metal, glass and combined pack. The main trends of the market are increasing consumer requirements to the quality and information about the proposed drinks, the growth of the number of consumers that attend to the ingredients and the impact of “the healthy food choice” on the market.

Removal of soft deposits from the distribution system improves the drinking water quality.

Science.gov (United States)

Lehtola, Markku J; Nissinen, Tarja K; Miettinen, Ilkka T; Martikainen, Pertti J; Vartiainen, Terttu

2004-02-01

Deterioration in drinking water quality in distribution networks represents a problem in drinking water distribution. These can be an increase in microbial numbers, an elevated concentration of iron or increased turbidity, all of which affect taste, odor and color in the drinking water. We studied if pipe cleaning would improve the drinking water quality in pipelines. Cleaning was arranged by flushing the pipes with compressed air and water. The numbers of bacteria and the concentrations of iron and turbidity in drinking water were highest at 9 p.m., when the water consumption was highest. Soft deposits inside the pipeline were occasionally released to bulk water, increasing the concentrations of iron, bacteria, microbially available organic carbon and phosphorus in drinking water. The cleaning of the pipeline decreased the diurnal variation in drinking water quality. With respect to iron, only short-term positive effects were obtained. However, removing of the nutrient-rich soft deposits did decrease the microbial growth in the distribution system during summer when there were favorable warm temperatures for microbial growth. No Norwalk-like viruses or coliform bacteria were detected in the soft deposits, in contrast to the high numbers of heterotrophic bacteria.

Water Consumption in European Children: Associations with Intake of Fruit Juices, Soft Drinks and Related Parenting Practices

Directory of Open Access Journals (Sweden)

Krystallia Mantziki

2017-05-01

Full Text Available Background: High intake of fruit juices and soft drinks contributes to excessive weight gain and obesity in children. Furthermore, parenting practices play an important role in the development of children’s dietary habits. The way parents play this role in the development of their children’s choices of beverages is still unclear. Objectives: To study the associations: (1 of both fruit juices and soft drinks consumption with water consumption of children and (2 The associations between parenting practices towards fruit juices and soft drinks and water consumption of children. Design: Cross-sectional data from 6 to 8 year old children from seven European communities (n = 1187 were collected. Associations among fruit juices, soft drinks, the respective parenting practices and the child’s water consumption were assessed by parental questionnaires. Results: The consumption of water was inversely associated with that of soft drinks but not with the consumption of fruit juices. The child’s water intake was favorably influenced when stricter parenting practices towards soft drinks were adopted (e.g., less parental allowance, low home availability and high parental self-efficacy in managing intake. There was less influence observed of parenting practices towards fruit juices. Fruit juices were consumed more often than soft drinks. Conclusions: Low consumption of soft drinks—and not of fruit juices—was associated with high water consumption in children in the current study. Moreover, parenting practices towards both fruit juices and soft drinks were associated with the water intake of the children, irrespective of their socio-economic status.

Associations between Parental Limits, School Vending Machine Purchases, and Soft Drink Consumption among Kentucky Middle School Students

Science.gov (United States)

Nickelson, Jen; Roseman, Mary G.; Forthofer, Melinda S.

2010-01-01

Objective: To examine associations between parental limits on soft drinks and purchasing soft drinks from school vending machines and consuming soft drinks among middle school students. Design: Secondary analysis of cross-sectional data from the middle school Youth Risk Behavior Survey. Setting: Eight public middle schools in central Kentucky.…

A Dissociation between Recognition and Hedonic Value in Caloric and Non-caloric Carbonated Soft Drinks

Directory of Open Access Journals (Sweden)

Franco eDelogu

2016-01-01

Full Text Available Consumption of sugar-sweetened beverages (SSBs is considered to be a contributor to diabetes and the epidemic of obesity in many countries. The popularity of non-caloric carbonated soft drinks as an alternative to SSBs may be a factor in reducing the health risks associated with SSBs consumption. This study focuses on the perceptual discrimination of SSBs from artificially sweetened beverages (ASBs. 55 college students rated 14 commercially available carbonated soft drinks in terms of sweetness and likeability. They were also asked to recognize if the drinks contained sugar or a non-caloric artificial sweetener. Overall, participants showed poor accuracy in discriminating drinks’ sweeteners, with significantly lower accuracy for SSBs than ASBs. Interestingly, we found a dissociation between sweetener recognition and drink pleasantness. In fact, in spite of a chance-level discrimination accuracy of SSBs, their taste was systematically preferred to the taste of non-caloric beverages. Our findings support the idea that hedonic value of carbonated soft drinks is dissociable from its identification and that the activation of the pleasure system seems not to require explicit recognition of the sweetener contained in the soft drink. We hypothesize that preference for carbonated soft drinks containing sugar over non-caloric alternatives might be modulated by metabolic factors that are independent from conscious and rational consumers’ choices.

Determination of some soft drink constituents and contamination by some heavy metals in Nigeria

Directory of Open Access Journals (Sweden)

Engwa Azeh Godwill

2015-01-01

Full Text Available Soft drinks are consumed daily in Nigeria due to its affordability, characteristic taste, and thirst quenching potential. However, the high demand may compromise the quality of production with possible contamination of heavy metals which have shown to cause intoxication and death in humans. This study evaluated some constituents of twenty-six soft drinks in Nigeria and investigated the presence of some heavy metal contaminants. The soft drinks were screened for the presence of sugar, carbon dioxide, phosphate and alcohol as well as the pH and acidity determined. The level of cadmium, mercury and lead were determined using atomic absorption spectrophotometer. The study showed the presence of sugar, carbon dioxide, phosphate, and alcohol in the soft drinks. The soft drinks were acidic in nature, pH ranging from 3 to 5 with a mean of 3.6 and the acid concentration was relatively low between 3 and 12 g/L with a mean of 8.1 g/L. Lead was present in all the samples ranging from 0.17 to 3.39 mg/L with a mean of 0.8, mercury was present in 22 samples ranging from 0.29 to 11.32 mg/L with a mean of 2.08 mg/L while cadmium was present only in one sample (0.149 mg/L. When compared to EPA, WHO and NIS standards, the levels of the heavy metal contaminants were above the tolerated limits for good quality drinking water in most samples. These results suggest that soft drinks in Nigeria may be contaminated with heavy metals which constitute a major public health problem. Thus, quality control is recommended during the production process especially at the stages of sterilization and purification.

Soft drink consumption and urinary stone recurrence: a randomized prevention trial.

Science.gov (United States)

Shuster, J; Jenkins, A; Logan, C; Barnett, T; Riehle, R; Zackson, D; Wolfe, H; Dale, R; Daley, M; Malik, I

1992-08-01

The object of this study was to determine if a strong association between soft drink (soda) consumption and recurrence of urinary stone disease, found in an earlier case-control study of adult males, had a causal component. The study sample consisted of 1009 male subjects, who completed an episode of urinary stone disease, who were aged 18-75 at that time, and who reported consuming at least 160 ml per day of soft drinks. Half of the subjects were randomized to refrain from consuming soft drinks, while the remaining subjects served as controls. The intervention group had an observed 6.4% advantage in actuarial 3 yr freedom from recurrence (p = 0.023 one-sided) over the control group. One important secondary finding was that for those who reported at the time of the index stone that their most consumed drink was acidified by phosphoric acid but not citric acid, the experimental group had a 15% higher 3 yr recurrence-free rate than the controls, p = 0.002, while for those who reported at the time of the index stone that their most consumed drink was acidified by citric acid with or without phosphoric acid, the experimental group had a similar 3 yr recurrence-free rate to the controls, p = 0.55. This interaction was significant, p = 0.019.

GAMBARAN JENIS DAN JUMLAH KONSUMSI FAST FOOD DAN SOFT DRINK PADA MAHASISWA OBESITAS DI UNIVERSITAS HASANUDDIN

OpenAIRE

Suryanti, Rut; Jafar, Nurhaedar; Syam, Aminuddin

2013-01-01

Konsumsi fast food dan soft drink dapat menyebabkan kelebihan berat badan dan obesitas.Penelitian ini bertujuan untuk mengetahui gambaran jenis dan jumlah zat gizi makro dari konsumsi fast food dan soft drink pada mahasiswa yang obesitas.Jenis penelitian adalah deskriptif, dilaksanakan pada bulan Mei-Juni 2013 di Universitas Hasanuddin dengan jumlah responden 60 orang. Instrument penelitian adalah kuesioner identitas diri dan food frekuensiSemiQuantitatif fast food dan soft drink, food pictur...

Restaurant foods, sugar-sweetened soft drinks, and obesity risk among young African American women.

Science.gov (United States)

Boggs, Deborah A; Rosenberg, Lynn; Coogan, Patricia F; Makambi, Kepher H; Adams-Campbell, Lucile L; Palmer, Julie R

2013-01-01

The prevalence of obesity is disproportionately high in African American women, and consumption of fast foods and sugar-sweetened soft drinks is also especially high among African Americans. We investigated the relation of intakes of sugar-sweetened soft drinks and specific types of restaurant foods to obesity in the Black Women's Health Study. In this prospective cohort study, 19,479 non-obese women aged 21-39 years at baseline were followed for 14 years (1995-2009). Dietary intake was assessed by validated food frequency questionnaire in 1995 and 2001. Cox regression models were used to estimate hazard ratios (HR) and 95% confidence intervals (CI) for the association of intakes of restaurant foods and sugar-sweetened soft drinks with incident obesity. Higher intakes of burgers from restaurants and sugar-sweetened soft drinks were associated with greater risk of becoming obese. The associations were present in models that included both factors and adjusted for overall dietary pattern. The HR of obesity in relation to restaurant burger consumption of > or = 2 times/week compared with or = 2 drinks/day compared with obesity among young African American women.

Soft drink consumption and gestational diabetes risk in the SUN project.

Science.gov (United States)

Donazar-Ezcurra, Mikel; Lopez-Del Burgo, Cristina; Martinez-Gonzalez, Miguel A; Basterra-Gortari, Francisco J; de Irala, Jokin; Bes-Rastrollo, Maira

2018-04-01

Gestational diabetes mellitus (GDM) prevalence is increasing worldwide. To the best of our knowledge the specific evaluation of soft drink consumption as a risk factor for developing GDM has only been conducted in the Nurses' Health Study II. To investigate the incidence of GDM according to soft drink consumption in the SUN project. The "Seguimiento Universidad de Navarra" (SUN) project is a prospective and dynamic cohort which included data of 3396 women who notified at least one pregnancy between December 1999 and March 2012. A validated 136-item semi-quantitative food frequency questionnaire was used to assess soft drink consumption. Four categories of sugar-sweetened soft drink (SSSD) and diet soft drink (DSD) consumption (servings) were established: rarely or never (3/month and ≤1/week) and high (≥2/week). Potential confounders were adjusted through non-conditional logistic regression models. During the follow-up, we identified 172 incident cases of GDM. After adjusting for age, baseline body mass index, family history of diabetes, smoking, total energy intake, physical activity, parity, fast-food consumption, adherence to Mediterranean dietary pattern, alcohol intake, multiple pregnancy, cardiovascular disease/hypertension at baseline, fiber intake, following special diet and snacking, SSSD consumption was significantly associated with an increased risk of incident GDM, with multivariable adjusted odds ratios (OR) of 2.03 (95% confidence interval [CI]: 1.25-3.31) and 1.67 (95% CI: 1.01-2.77) for the highest and intermediate categories, respectively, versus the lowest category (p for linear trend: 0.006). Conversely, DSD consumption was not associated with GDM incidence (adjusted OR: 0.82; 95% CI: 0.52-1.31) for the highest versus the lowest category (p for linear trend: 0.258). Additional sensitivity analyses did not change the results. Higher consumption of SSSDs before pregnancy was an independent risk factor for GDM, however, no association was

Analysis of Wastewater Treatment Efficiency in a Soft Drinks Industry

Science.gov (United States)

Boguniewicz-Zabłocka, Joanna; Capodaglio, Andrea G.; Vogel, Daniel

2017-10-01

During manufacturing processes, most industrial plants generate wastewater which could become harmful to the environment. Discharge of untreated or improperly treated industrial wastewaters into surface water could, in fact, lead to deterioration of the receiving water body's quality. This paper concerns wastewater treatment solutions used in the soft drink production industry: wastewater treatment plant effectiveness analysis was determined in terms of basic pollution indicators, such as BOD, COD, TSS and variable pH. Initially, the performance of mechanic-biological systems for the treatment of wastewater from a specific beverages production process was studied in different periods, due to wastewater flow fluctuation. The study then showed the positive effects on treatment of wastewater augmentation by methanol, nitrogen and phosphorus salts dosed into it during the treatment process. Results confirm that after implemented modification (methanol, nitrogen and phosphorus additions) pollution removal occurs mostly with higher efficiency.

Soft Drink “Pouring Rights”: Marketing Empty Calories to Children

Science.gov (United States)

Nestle, Marion

2000-01-01

Healthy People 2010 objectives call for meals and snacks served in schools to contribute to overall diets that meet federal dietary guidelines. Sales in schools of foods and drinks high in calories and low in nutrients undermine this health objective, as well as participation in the more nutritious, federally sponsored, school lunch programs. Competitive foods also undermine nutrition information taught in the classroom. Lucrative contracts between school districts and soft drink companies for exclusive rights to sell one brand are the latest development in the increasing commercialization of school food. These contracts, intended to elicit brand loyalty among young children who have a lifetime of purchases ahead of them, are especially questionable because they place schools in the position of “pushing” soft drink consumption. “Pouring rights” contracts deserve attention from public health professionals concerned about the nutritional quality of children's diets. Imagesp308-ap313-a PMID:11059423

Soft drinks and in vitro dental erosion.

Science.gov (United States)

Gravelle, Brent L; Hagen Ii, Ted W; Mayhew, Susan L; Crumpton, Brooks; Sanders, Tyler; Horne, Victoria

2015-01-01

The purpose of this investigation was to determine to what extent the in vitro exposure of healthy teeth to various commonly consumed carbonated soft drinks may precipitate dental erosion. Forty-two healthy, extracted, previously unerupted human molars were weighed prior to, during, and after suspension in various sugared and diet or zero-calorie carbonated beverages for 20 days; the specimens were stored at room temperature while being stirred at 275 rpm. The percentage decrease in tooth weight from before to after exposure represented the weight loss due to enamel erosion; values in the experimental groups varied from 3.22% to 44.52% after 20 days' exposure. Data were subjected to analysis of variance and post hoc Scheffe testing at a level of α = 0.05. Nonsugared drinks (diet and zero-calorie) as a whole were more erosive than sugared beverages. A significant positive correlation was found between the amount of titratable acid and percentage of tooth erosion, while a significant negative correlation was revealed between the beverage pH and percentage of tooth erosion. No significant correlations were found between calcium or phosphate ion concentrations and the amount of erosion. It appears that enamel erosion is dependent on not only the beverage flow rate, pH, and amount of titratable acid, but also whether the soft drink is of the diet or zero-calorie variety, which reflects the type of artificial sweetener present.

Dental caries experience in high risk soft drinks factory workers of South India: a comparative study.

Science.gov (United States)

Kumar, Sandeep; Acharya, Shashidhar; Vasthare, Ramprasad; Singh, Siddharth Kumar; Gupta, Anjali; Debnath, Nitai

2014-01-01

The consumption of soft-drinks has been associated with dental caries development. The aim was to evaluate dental caries experience amongst the workers working in soft-drink industries located in South India and compare it with other factory workers. To evaluate the validity of specific caries index (SCI), which is newer index for caries diagnosis. This was a cross-sectional study carried out among 420 workers (210 in soft-drinks factory and 210 in other factories), in the age group of 20-45 years of Udupi district, Karnataka, India. Index used for clinical examination was decayed, missing, filled surfaces (DMFS) index and SCI. The mean and standard deviation (SD) of decayed surface (5.8 ± 1.8), missing surface (4.3 ± 2) and filled surface (1.94 ± 1.95) and total DMFS score (12.11 ± 3.8) in soft-drinks factory workers were found to be significantly higher than the other factory workers. The total SCI score (mean and SD) was found to be significantly higher in soft-drinks factory workers (5.83 ± 1.80) compared with other factory workers (4.56 ± 1.45). There was a high correlation obtained between SCI score and DMFS score. The regression equation given by DMFS = 1.178 + 1.866 (SCI scores). The caries experience was higher in workers working in soft-drinks factory and this study also showed that specific caries index can be used as a valid index for assessing dental caries experience.

Carbonated soft drinks induce oxidative stress and alter the expression of certain genes in the brains of Wistar rats.

Science.gov (United States)

El-Terras, Adel; Soliman, Mohamed Mohamed; Alkhedaide, Adel; Attia, Hossam Fouad; Alharthy, Abdullah; Banaja, Abdel Elah

2016-04-01

In Saudi Arabia, the consumption of carbonated soft drinks is common and often occurs with each meal. Carbonated soft drink consumption has been shown to exhibit effects on the liver, kidney and bone. However, the effects of these soft drinks on brain activity have not been widely examined, particularly at the gene level. Therefore, the current study was conducted with the aim of evaluating the effects of chronic carbonated soft drink consumption on oxidative stress, brain gene biomarkers associated with aggression and brain histology. In total, 40 male Wistar rats were divided into four groups: Group 1 served as a control and was provided access to food and water ad libitum; and groups 2‑4 were given free access to food and carbonated soft drinks only (Cola for group 2, Pepsi for group 3 and 7‑UP for group 4). Animals were maintained on these diets for 3 consecutive months. Upon completion of the experimental period, animals were sacrificed and serological and histopathological analyses were performed on blood and tissues samples. Reverse transcription‑polymerase chain reaction was used to analyze alterations in gene expression levels. Results revealed that carbonated soft drinks increased the serum levels of malondialdehyde (MDA). Carbonated soft drinks were also observed to downregulate the expression of antioxidants glutathione reductase (GR), catalase and glutathione peroxidase (GPx) in the brain when compared with that in the control rats. Rats administered carbonated soft drinks also exhibited decreased monoamine oxidase A (MAO‑A) and acetylcholine esterase (AChE) serum and mRNA levels in the brain. In addition, soft drink consumption upregulated mRNA expression of dopamine D2 receptor (DD2R), while 5-hydroxytryptamine transporter (5‑HTT) expression was decreased. However, following histological examination, all rats had a normal brain structure. The results of this study demonstrated that that carbonated soft drinks induced oxidative stress and

Consumption of artificially-sweetened soft drinks in pregnancy and risk of child asthma and allergic rhinitis.

Science.gov (United States)

Maslova, Ekaterina; Strøm, Marin; Olsen, Sjurdur F; Halldorsson, Thorhallur I

2013-01-01

Past evidence has suggested a role of artificial sweeteners in allergic disease; yet, the evidence has been inconsistent and unclear. To examine relation of intake of artificially-sweetened beverages during pregnancy with child asthma and allergic rhinitis at 18 months and 7 years. We analyzed data from 60,466 women enrolled during pregnancy in the prospective longitudinal Danish National Birth Cohort between 1996 and 2003. At the 25th week of gestation we administered a validated Food Frequency Questionnaire which asked in detail about intake of artificially-sweetened soft drinks. At 18 months, we evaluated child asthma using interview data. We also assessed asthma and allergic rhinitis through a questionnaire at age 7 and by using national registries. Current asthma was defined as self-reported asthma diagnosis and wheeze in the past 12 months. We examined the relation between intake of artificially-sweetened soft drinks and child allergic disease outcomes and present here odds ratios with 95% CI comparing daily vs. no intake. At 18 months, we found that mothers who consumed more artificially-sweetened non-carbonated soft drinks were 1.23 (95% CI: 1.13, 1.33) times more likely to report a child asthma diagnosis compared to non-consumers. Similar results were found for child wheeze. Consumers of artificially-sweetened carbonated drinks were more likely to have a child asthma diagnosis in the patient (1.30, 95% CI: 1.01, 1.66) and medication (1.13, 95% CI: 0.98, 1.29) registry, as well as self-reported allergic rhinitis (1.31, 95% CI: 0.98, 1.74) during the first 7 years of follow-up. We found no associations for sugar-sweetened soft drinks. Carbonated artificially-sweetened soft drinks were associated with registry-based asthma and self-reported allergic rhinitis, while early childhood outcomes were related to non-carbonated soft drinks. These results suggest that consumption of artificially-sweetened soft drinks during pregnancy may play a role in offspring

Dental erosion and severe tooth decay related to soft drinks: a case report and literature review.

Science.gov (United States)

Cheng, Ran; Yang, Hui; Shao, Mei-ying; Hu, Tao; Zhou, Xue-dong

2009-05-01

Soft drinks have many potential health problems. The inherent acids and sugars have both acidogenic and cariogenic potential, resulting in dental caries and potential enamel erosion. In this report we present a 25-year-old man complaining with the severe worn-out of the front teeth during the past 3 years. He had a history of drinking cola for more than 7 years and had a poor oral hygiene. Severe decays were present in the incisors and the canines, while less severe lesions were noted on the premolars and the molars. The review is to show the relationship between dental erosion and caries and soft drinks. Some efforts have been taken to reduce the harmful effect of soft drinks.

Assessment of Process Capability: the case of Soft Drinks Processing Unit

Science.gov (United States)

Sri Yogi, Kottala

2018-03-01

The process capability studies have significant impact in investigating process variation which is important in achieving product quality characteristics. Its indices are to measure the inherent variability of a process and thus to improve the process performance radically. The main objective of this paper is to understand capability of the process being produced within specification of the soft drinks processing unit, a premier brands being marketed in India. A few selected critical parameters in soft drinks processing: concentration of gas volume, concentration of brix, torque of crock has been considered for this study. Assessed some relevant statistical parameters: short term capability, long term capability as a process capability indices perspective. For assessment we have used real time data of soft drinks bottling company which is located in state of Chhattisgarh, India. As our research output suggested reasons for variations in the process which is validated using ANOVA and also predicted Taguchi cost function, assessed also predicted waste monetarily this shall be used by organization for improving process parameters. This research work has substantially benefitted the organization in understanding the various variations of selected critical parameters for achieving zero rejection.

Study to Assess the Prevalence of Soft Drinking and its Determinants among the School going Children of Gwalior city

Directory of Open Access Journals (Sweden)

Neeraj Gour

2010-07-01

Full Text Available Background: Over the time there has been spectrum of changes in the universe. It may be at physical, chemical and cultural level. People have adopted newer life styles like their working style, clothing’s, food habits and so on. One of the pertinent example of this newer food habits is rising consumption of soft drinks rather than traditional home made drinks. This study was aimed to find out various determinants responsible for this rising trend of soft drinking so that effective intervention can be undertaken to overcome this creeping problem. Objectives: To find out the prevalence of soft drinking consumption among the students and to assess the determinants of soft drink consumption among the students. Materials and methods: It was a cross sectional study. A sample of 200 students was selected from the both govt. and private schools by stratified random sampling. Then they all were interviewed by using pre tested, semi structured proforma. Later on data was analyzed manually and by using suitable statistical software. Results: Frequent drinking of soft drinks was found more among the students of private schools than govt. (p < 0.05. A significant association was found between pocket money, TV watching and frequency of soft drinking (p< 0.05.Other reasons which were found to be responsible by far for frequent soft drinking like lack of awareness regarding hazards, frequent TV watching, desire of new taste, lack of health education from the parents side etc. Conclusion: Soft drinking consumption is creeping day by day amongst the children with out knowing their hazards. And they are the future of any country so there should be effective intervention from both sides govt. as well as parents to get rid of it at earliest.

Babies, soft drinks and snacks: a concern in low- and middle-income countries?

OpenAIRE

Huffman, Sandra L; Piwoz, Ellen G; Vosti, Stephen A; Dewey, Kathryn G

2014-01-01

Undernutrition in infants and young children is a global health priority while overweight is an emerging issue. Small-scale studies in low- and middle-income countries have demonstrated consumption of sugary and savoury snack foods and soft drinks by young children. We assessed the proportion of children 6?23 months of age consuming sugary snack foods in 18 countries in Asia and Africa using data from selected Demographic and Health Surveys and household expenditures on soft drinks and biscui...

An Empirical Analysis of Socio-Demographic Stratification in Sweetened Carbonated Soft-Drink Purchasing

OpenAIRE

Rhodes, Charles

2012-01-01

Caloric soft drinks are the number one source of added sugars in U.S. diets, and are associated with many health problems. Three recent years of household purchase, household demographic, and industry advertising data allow Heckit estimation to identify how specific demographic groups vary in their purchase response to marketing of sweetened carbonated soft drinks (sCSDs) at the product category level. Empirical results reveal unique non-linear patterns of household purchase response to sCSD-...

Correlates of fruit, vegetable, soft drink, and snack intake among adolescents: the ESSENS study

Directory of Open Access Journals (Sweden)

Mekdes K. Gebremariam

2016-09-01

Full Text Available Background: Identifying modifiable correlates of dietary behaviors is of utmost importance for the promotion of healthy dietary behaviors. Objective: This study explores individual, home, and school/neighborhood environmental correlates of dietary behaviors (intake of fruits, vegetables, soft drinks, and unhealthy snacks among adolescents. Methods: In total, 742 adolescents with a mean age of 13.6 (SD=0.3 were included in this cross-sectional study conducted in 11 secondary schools located in the eastern part of Norway. A web-based questionnaire was used to collect data. Univariable and multivariable linear regression analyses were used to explore factors associated with the dietary behaviors included. Results: A higher frequency of food/drink purchase in the school canteen was related to a higher consumption of soft drinks and snacks. A higher frequency of food/drink purchase in shops around schools during break or recess was related to a higher consumption of snacks. A higher frequency of food/drink purchase in shops around the neighborhood on the way to and from school was related to a higher consumption of soft drinks. Perceived parental modeling and perceived accessibility at home were found to be positively associated with all dietary behaviors. Perceived parental rules were inversely associated with soft drink and snack consumption; self-efficacy related to healthy eating was positively associated with fruit and vegetable consumption. Other included school and neighborhood environmental correlates were not associated with the dietary behaviors. Conclusions: There is a need to address the food purchasing behavior of the adolescents using different approaches. The findings also highlight the important role of parents and the home environment for healthy and unhealthy dietary behaviors of adolescents.

Dental erosion and severe tooth decay related to soft drinks: a case report and literature review*

Science.gov (United States)

Cheng, Ran; Yang, Hui; Shao, Mei-ying; Hu, Tao; Zhou, Xue-dong

2009-01-01

Soft drinks have many potential health problems. The inherent acids and sugars have both acidogenic and cariogenic potential, resulting in dental caries and potential enamel erosion. In this report we present a 25-year-old man complaining with the severe worn-out of the front teeth during the past 3 years. He had a history of drinking cola for more than 7 years and had a poor oral hygiene. Severe decays were present in the incisors and the canines, while less severe lesions were noted on the premolars and the molars. The review is to show the relationship between dental erosion and caries and soft drinks. Some efforts have been taken to reduce the harmful effect of soft drinks. PMID:19434767

Market integration and market structure in the European soft drinks industry: always Coca-Cola?

OpenAIRE

Matraves, Catherine

1999-01-01

This paper focuses on the question of European integration, considering whether the geographic level at which competition takes place differs across the two major segments of the soft drinks industry: carbonated soft drinks and mineral water. Our evidence shows firms are competing at the European level in both segments. Interestingly, the European market is being integrated through corporate strategy, defined as increased multinationality, rather than increased trade flows. To interpret these...

Determination of the total acidity in soft drinks using potentiometric sequential injection titration.

Science.gov (United States)

van Staden, J Koos F; Mashamba, M Mulalo G; Stefan, R Raluca I

2002-12-06

A potentiometric SI titration system for the determination of total acidity in soft drinks is proposed. The concept is based on the aspiration of the acid soft drink sample between two base zones into a holding coil with the volume of the first base zone twice to that of the second one and channelled by flow reversal through a reaction coil to a potentiometric sensor. A solution of 0.1 mol l(-1) sodium chloride is used as ionic strength adjustment buffer in the carrier stream. The system has been applied to the analysis of some South African soft drinks having a total acidity level of about 0.2-0.3% (w/v). The method has a sample frequency of 45 samples per h with a linear range of 0.1 and 0.6% (w/v). It is easy to use, fully computerised, and gives the results that are comparable to both automated batch titration and manual titration.

Soft Drink “Pouring Rights”: Marketing Empty Calories to Children

OpenAIRE

Nestle, Marion

2000-01-01

Healthy People 2010 objectives call for meals and snacks served in schools to contribute to overall diets that meet federal dietary guidelines. Sales in schools of foods and drinks high in calories and low in nutrients undermine this health objective, as well as participation in the more nutritious, federally sponsored, school lunch programs. Competitive foods also undermine nutrition information taught in the classroom. Lucrative contracts between school districts and soft drink companies fo...

The Effect of Different Soft Drinks on the Shear Bond Strength of Orthodontic Brackets

Directory of Open Access Journals (Sweden)

M Omid Khoda

2012-01-01

Full Text Available Objective: It is proved that acidic soft drinks that are commonly used, have an adverse effect on dental structures, and may deteriorate oral heath of our patients and orthodontic appliances. The aim of this study was to compare the effect of yoghurt drink with other soft drinks on the shear bond strength of orthodontic brackets.Materials and Methods: Seventy-five first premolar teeth extracted for orthodontic purposes were selected and standard twin metal brackets were bonded on the center of buccal surface with No-Mix composite. The teeth were thermocycled for 625 cycles and randomly divided into five groups of artificial saliva, carbonated yoghurt drink with lactic acid base, non-carbonated yoghurt drink with lactic acid base, 7 up with citric acid base and Pepsi with phosphoric acid base. In all groups, the teeth were immersed in liquid for five-minute sessions three times with equal intervening intervals for 3 months. SBS was measured by a universal testing machine with a speed of 0.5mm/min. Data was analyzed statistically by one-way ANOVA.Results: The results showed that mean values for the shear bond strength of carbonated yoghurt drinks, non-carbonated yoghurt drinks, 7up and Pepsi groups were 12.98(+_2.95, 13.26(+_4.00, 16.11(+_4.89, 14.73(+_5.10, respectively. There was no statistically significant difference among the groups (P-value= 0.238Conclusion: Soft drinks used in this study did not decrease the bond strength of the brackets bonded with this specific type of composite.

The effect of different soft drinks on the shear bond strength of orthodontic brackets.

Science.gov (United States)

Omid Khoda, M; Heravi, F; Shafaee, H; Mollahassani, H

2012-01-01

It is proved that acidic soft drinks that are commonly used, have an adverse effect on dental structures, and may deteriorate oral heath of our patients and orthodontic appliances. The aim of this study was to compare the effect of yoghurt drink with other soft drinks on the shear bond strength of orthodontic brackets. Seventy-five first premolar teeth extracted for orthodontic purposes were selected and standard twin metal brackets were bonded on the center of buccal surface with No-Mix composite. The teeth were thermocycled for 625 cycles and randomly divided into five groups of artificial saliva, carbonated yoghurt drink with lactic acid base, non-carbonated yoghurt drink with lactic acid base, 7 up with citric acid base and Pepsi with phosphoric acid base. In all groups, the teeth were immersed in liquid for five-minute sessions three times with equal intervening intervals for 3 months. SBS was measured by a universal testing machine with a speed of 0.5mm/min. Data was analyzed statistically by one-way ANOVA. The results showed that mean values for the shear bond strength of carbonated yoghurt drinks, non-carbonated yoghurt drinks, 7up and Pepsi groups were 12.98(±2.95), 13.26(±4.00), 16.11(±4.89), 14.73(±5.10), respectively. There was no statistically significant difference among the groups (P-value= 0.238) Soft drinks used in this study did not decrease the bond strength of the brackets bonded with this specific type of composite.

The Effect of Different Soft Drinks on the Shear Bond Strength of Orthodontic Brackets

Science.gov (United States)

Omid Khoda, M.; Heravi, F.; Shafaee, H.; Mollahassani, H.

2012-01-01

Objective: It is proved that acidic soft drinks that are commonly used, have an adverse effect on dental structures, and may deteriorate oral heath of our patients and orthodontic appliances. The aim of this study was to compare the effect of yoghurt drink with other soft drinks on the shear bond strength of orthodontic brackets. Materials and Methods: Seventy-five first premolar teeth extracted for orthodontic purposes were selected and standard twin metal brackets were bonded on the center of buccal surface with No-Mix composite. The teeth were thermocycled for 625 cycles and randomly divided into five groups of artificial saliva, carbonated yoghurt drink with lactic acid base, non-carbonated yoghurt drink with lactic acid base, 7 up with citric acid base and Pepsi with phosphoric acid base. In all groups, the teeth were immersed in liquid for five-minute sessions three times with equal intervening intervals for 3 months. SBS was measured by a universal testing machine with a speed of 0.5mm/min. Data was analyzed statistically by one-way ANOVA. Results: The results showed that mean values for the shear bond strength of carbonated yoghurt drinks, non-carbonated yoghurt drinks, 7up and Pepsi groups were 12.98(±2.95), 13.26(±4.00), 16.11(±4.89), 14.73(±5.10), respectively. There was no statistically significant difference among the groups (P-value= 0.238) Conclusion: Soft drinks used in this study did not decrease the bond strength of the brackets bonded with this specific type of composite. PMID:23066479

Screen-based sedentary time: Association with soft drink consumption and the moderating effect of parental education in European children: The ENERGY study.

Science.gov (United States)

Gebremariam, Mekdes K; Chinapaw, Mai J; Bringolf-Isler, Bettina; Bere, Elling; Kovacs, Eva; Verloigne, Maïté; Stok, F Marijn; Manios, Yannis; Brug, Johannes; Lien, Nanna

2017-01-01

The aim of the present study was to explore if children who spend more time on screen-based sedentary behaviors (i.e.TV viewing and computer use) drink more sugar-sweetened soft drinks. The study also assessed whether these associations were independent of individual and home environmental correlates of soft drink consumption and whether they were moderated by parental education. Data were collected from 7886 children participating in the EuropeaN Energy balance Research to prevent excessive weight Gain among Youth (ENERGY) survey conducted in eight European countries. Self-report questionnaires were used. Multilevel linear regression analyses with soft drink consumption as dependent variable, TV viewing and computer use as independent variables and age, gender, parental education, attitude towards soft drinks, self-efficacy, parental modelling, parental rules and home availability of soft drinks as covariates were conducted. Further interactions were tested to explore if these associations were moderated by parental education. Country-specific analyses were conducted. In six of the eight included countries, a significant positive association was observed between TV viewing (min/day) and soft drink consumption (ml/day), independent of individual and home environmental correlates of soft drink consumption (B = 0.46 (0.26-0.66) in Greece, B = 0.77 (0.36-1.17) in Norway, B = 0.82 (0.12-1.51) in Hungary, B = 1.06 (0.67-1.46) in Spain, B = 1.21 (0.67-1.74) in Belgium and B = 1.49 (0.72-2.27) in Switzerland). There was no significant association between computer use and soft drink consumption in six of the eight included countries in the final models. Moderation effects of parental education in the association between TV viewing and soft drink consumption were found in Norway and Hungary, the association being stronger among those with low parental education. TV viewing appears to be independently associated with soft drink consumption and this association was moderated

State sales tax rates for soft drinks and snacks sold through grocery stores and vending machines, 2007.

Science.gov (United States)

Chriqui, Jamie F; Eidson, Shelby S; Bates, Hannalori; Kowalczyk, Shelly; Chaloupka, Frank J

2008-07-01

Junk food consumption is associated with rising obesity rates in the United States. While a "junk food" specific tax is a potential public health intervention, a majority of states already impose sales taxes on certain junk food and soft drinks. This study reviews the state sales tax variance for soft drinks and selected snack products sold through grocery stores and vending machines as of January 2007. Sales taxes vary by state, intended retail location (grocery store vs. vending machine), and product. Vended snacks and soft drinks are taxed at a higher rate than grocery items and other food products, generally, indicative of a "disfavored" tax status attributed to vended items. Soft drinks, candy, and gum are taxed at higher rates than are other items examined. Similar tax schemes in other countries and the potential implications of these findings relative to the relationship between price and consumption are discussed.

Fluoride Varnishes against Dental Erosion Caused by Soft Drink Combined with Pediatric Liquid Medicine.

Science.gov (United States)

Alexandria, Adílis Kalina; Valença, Ana Maria Gondim; Cabral, Lúcio Mendes; Maia, Lucianne Cople

2017-01-01

The present study evaluated the effect of NaF and CPP-ACP/NaF varnishes to reduce erosion produced by soft drink (SD) combined or not with pediatric liquid medicine. Enamel specimens were pre-treated with fluoride varnish, according to the following groups: NaF varnish (Duraphat®) or CPP-ACP/NaF varnish (MI varnishTM). Two types of erosive cycles were made: by soft drink erosion (SDE) or by pediatric liquid medicine plus soft drink erosion (PLM/SDE). Bovine enamel specimens were randomly assigned in six groups (n=10): G1=NaF + SDE; G2=CPP-ACP/NaF + SDE; G3=Distilled and deionized (DD) water + SDE; G4=NaF + PLM/SDE; G5=CPP-ACP/NaF + PLM/SDE and G6=DD water + PLM/SDE. Before treatments, the sample surface was divided in two areas (unexposed area-UA and exposed area-EA). The specimens were evaluated by 3D non-contact profilometry technique to determinate tooth structure loss (TSL) and surface roughness (Sa). Scanning electron microscopy (SEM) analysis was also performed. After SDE, G2 presented the lowest TSL values compared to G3 (p=0.008). G1 and G2 did not differ between them (p=0.203) and no groups differed among them despite Sa. Regarding TSL and Sa, G4 and G5 differed from G6 (p=0.0001), but not between them (p=1.00). Examining 3D and SEM images, the greatest differences between UA and EA were observed for G3 and G6. CPP-ACP/NaF varnish seems to be a promising treatment to reduce enamel loss from the erosion produced by a soft drink. Both varnishes also showed capacity to reduce TSL and Sa after erosion by soft drink combined to pediatric liquid medicine.

Price elasticity of the demand for soft drinks, other sugar-sweetened beverages and energy dense food in Chile.

Science.gov (United States)

Guerrero-López, Carlos M; Unar-Munguía, Mishel; Colchero, M Arantxa

2017-02-10

Chile is the second world's largest per capita consumer of caloric beverages. Caloric beverages are associated with overweight, obesity and other chronic diseases. The objective of this study is to estimate the price elasticity of demand for soft drinks, other sugar-sweetened beverages and high-energy dense foods in urban areas in Chile in order to evaluate the potential response of households' consumption to changes in prices. We used microdata from the VII Family Budget Survey 2012-2013, which collects information on expenditures made by Chilean urban households on items such as beverages and foods. We estimated a Linear Approximation of an Almost Ideal Demand System Model to derive own and cross price elasticities of milk, coffee, tea and other infusions, plain water, soft drinks, other flavored beverages, sweet snacks, sugar and honey, and desserts. We considered the censored nature of the data and included the Inverse Mills Ratio in each equation of the demand system. We estimated a Quadratic Almost Ideal Demand System and a two-part model as sensitivity analysis. We found an own price-elasticity of -1.37 for soft drinks. This implies that a price increase of 10% is associated with a reduction in consumption of 13.7%. We found that the rest of food and beverages included in the demand system behave as substitutes for soft drinks. For instance, plain water showed a cross-price elasticity of 0.63: a 10% increase in price of soft drinks could lead to an increase of 6.3% of plain water. Own and cross price elasticities were similar between models. The demand of soft drinks is price sensitive among Chilean households. An incentive system such as subsidies to non-sweetened beverages and tax to soft drinks could lead to increases in the substitutions for other healthier beverages.

Price elasticity of the demand for soft drinks, other sugar-sweetened beverages and energy dense food in Chile

Directory of Open Access Journals (Sweden)

Carlos M. Guerrero-López

2017-02-01

Full Text Available Abstract Background Chile is the second world’s largest per capita consumer of caloric beverages. Caloric beverages are associated with overweight, obesity and other chronic diseases. The objective of this study is to estimate the price elasticity of demand for soft drinks, other sugar-sweetened beverages and high-energy dense foods in urban areas in Chile in order to evaluate the potential response of households’ consumption to changes in prices. Methods We used microdata from the VII Family Budget Survey 2012–2013, which collects information on expenditures made by Chilean urban households on items such as beverages and foods. We estimated a Linear Approximation of an Almost Ideal Demand System Model to derive own and cross price elasticities of milk, coffee, tea and other infusions, plain water, soft drinks, other flavored beverages, sweet snacks, sugar and honey, and desserts. We considered the censored nature of the data and included the Inverse Mills Ratio in each equation of the demand system. We estimated a Quadratic Almost Ideal Demand System and a two-part model as sensitivity analysis. Results We found an own price-elasticity of −1.37 for soft drinks. This implies that a price increase of 10% is associated with a reduction in consumption of 13.7%. We found that the rest of food and beverages included in the demand system behave as substitutes for soft drinks. For instance, plain water showed a cross-price elasticity of 0.63: a 10% increase in price of soft drinks could lead to an increase of 6.3% of plain water. Own and cross price elasticities were similar between models. Conclusions The demand of soft drinks is price sensitive among Chilean households. An incentive system such as subsidies to non-sweetened beverages and tax to soft drinks could lead to increases in the substitutions for other healthier beverages.

The Impact of Soft Factors on Quality Improvement in Manufacturing Industry

Science.gov (United States)

Chan, Shiau Wei; Fauzi Ahmad, Md; Kong, Mei Wan

2017-08-01

Nowadays, soft factors have become the key factors of success in quality improvement of an organisation. Many organisations have neglected the importance of soft factors, this may influence the organisational performance. Hence, the purpose of this research is to examine the impact of soft factors on quality improvement in manufacturing industries. Six hypotheses were examined while considering six dimensions of soft factors including management commitment, customer focus, supplier relationship, employee involvement, training and education, and reward and recognition that have a positive impact on quality improvement. In this study, eighty one managers from the quality department were randomly selected in the manufacturing industry in Batu Pahat, Johor. The questionnaires were distributed to them. The researcher analysed the quantitatively collected data using descriptive analysis and correlation analysis. The findings of this study revealed that all soft factors are correlated to the quality improvement in an organisation with a high significant value but the regression analysis shows that the supplier relationship and employee involvement has more significant impact on quality improvement as compared to other soft factors which contributes of this study.

Estimation of fluoride levels in various commercially available carbonated soft drinks in Chandigarh city, India

Directory of Open Access Journals (Sweden)

Mohit Bansal

2015-01-01

Full Text Available Introduction: Fluoride has a preventive action on dental caries. However, Excessive ingestion of fluoride from different sources can lead to the development of dental fluorosis. Aim: To estimate fluoride levels in various commercially available carbonated soft drinks available in Chandigarh city. Materials and Methods: Twelve different brands of commercially available soft drinks were purchased from three different places and divided into three groups. Fluoride levels were estimated using fluoride test strips Quantofix 37211 Fluka; Sigma-Aldrich. Results: Fluoride levels ranged from 0.12 to 0.42 mg/dl F with the maximum level in Thumbs up and least in Diet Pepsi. Conclusion: The levels of fluoride varied in various carbonated soft drinks analyzed. This could contribute significantly to the total fluoride intake from all sources and thus be an important risk factor for the development of dental fluorosis.

Exposure to food advertising on television: associations with children's fast food and soft drink consumption and obesity.

Science.gov (United States)

Andreyeva, Tatiana; Kelly, Inas Rashad; Harris, Jennifer L

2011-07-01

There is insufficient research on the direct effects of food advertising on children's diet and diet-related health, particularly in non-experimental settings. We employ a nationally-representative sample from the Early Childhood Longitudinal Survey-Kindergarten Cohort (ECLS-K) and the Nielsen Company data on spot television advertising of cereals, fast food restaurants and soft drinks to children across the top 55 designated-market areas to estimate the relation between exposure to food advertising on television and children's food consumption and body weight. Our results suggest that soft drink and fast food television advertising is associated with increased consumption of soft drinks and fast food among elementary school children (Grade 5). Exposure to 100 incremental TV ads for sugar-sweetened carbonated soft drinks during 2002-2004 was associated with a 9.4% rise in children's consumption of soft drinks in 2004. The same increase in exposure to fast food advertising was associated with a 1.1% rise in children's consumption of fast food. There was no detectable link between advertising exposure and average body weight, but fast food advertising was significantly associated with body mass index for overweight and obese children (≥85th BMI percentile), revealing detectable effects for a vulnerable group of children. Exposure to advertising for calorie-dense nutrient-poor foods may increase overall consumption of unhealthy food categories. Copyright © 2011 Elsevier B.V. All rights reserved.

Microbial quality of soft drinks sold in Abuja, Nigeria | Okpalugo ...

African Journals Online (AJOL)

Isolates were identified using growth on nutrient agar and broth, Gram's reaction, colony morphology, biochemical tests results and criteria for disregarding ... Visual inspection of packages, quality assessment of soft drinks plants/vessels and packaging materials, as well as resistance testing should be critically considered.

Risks of a fructose rich soft drink consumption on some biochemical parameters in Balb/c mice

International Nuclear Information System (INIS)

Abd Elmonem, H.A.; Ali, E.A.

2011-01-01

Consumption of soft drinks, in particular carbonated beverages, has markedly increased in the last two to three decades. In fact, the carbonated beverages are the most popular refreshments among most of the world's population. The aim of this study was to assess the body weight gains and analyze some biochemical and hematological parameters in male and female Balb/c mice. Animals were provided with diluted coca cola (fructose rich soft drink) for 6 weeks and were matched against corresponding control animals. The control animals were maintained on tap water ad libitum and coca cola was diluted v/v by tap water. The results revealed that the percentages of body weight gains of male and female control animals were significantly higher than the corresponding mice provided with coca cola. Hemoglobin content (Hb, g/100ml blood), erythrocytes (RBCs), hematocrit (HCT), mean corpuscular volume (MCV), mean corpuscular hemoglobin (MCH), leucocytes (WBCs), granulocytes and blood platelet counts were significantly decreased in the groups of mice treated with the soft drink, compared to the control groups. However, significant increases were observed in lymphocytes in the treated groups. Consumption of the soft drink (coca cola) in both male and female animal groups exhibited significant increases of total cholesterol, triglycerides, low density lipoprotein-c and atherogenic index. Levels of serum calcium significantly decreased in both male and female treated mice than the corresponding control groups. Consumption of coca cola did not affect the levels of T3. This study suggests that consumption of high fructose soft drink may lead to many health problems

Hubungan Konsumsi Fast Food dan Soft Drink terhadap Siswa Obesitas dan Tidak Obesitas di SMAN 4 Medan

OpenAIRE

Nadya, Kezya

2016-01-01

Obesity has become pandemic throughout the world and was declared by the world health organization (WHO) as the most chronic health problems. Obesity is a problem that is troubling among adolescents. One of the factors that can influence obesity is the availability of unhealthy food and drink, that is Fast Food and Soft Drink. The aim of the research was to investigate the realitionship between Fast Food and Soft Drink comsumption and the insidence of obesity and non obesity in student in ...

Erosive Effect of Different Soft Drinks on Enamel Surface in vitro: Application of Stylus Profilometry.

Science.gov (United States)

Barac, Radomir; Gasic, Jovanka; Trutic, Natasa; Sunaric, Slavica; Popovic, Jelena; Djekic, Petar; Radenkovic, Goran; Mitic, Aleksandar

2015-01-01

To assess the erosive potential of various soft drinks by measuring initial pH and titratable acidity (TA) and to evaluate enamel surface roughness using different exposure times. The initial pH of the soft drinks (group 1: Coca-Cola; group 2: orange juice; group 3: Cedevita; group 4: Guarana, and group 5: strawberry yoghurt) was measured using a pH meter, and TA was measured by titration with NaOH. Enamel samples (n = 96), cut from unerupted human third molars, were randomly assigned to 6 groups: experimental (groups 1-5) and control (filtered saliva). The samples were exposed to 50 ml of soft drinks for 15, 30 and 60 min, 3 times daily, during 10 days. Between immersions, the samples were kept in filtered saliva. Enamel surface roughness was measured by diamond stylus profilometer using the following roughness parameters: Ra, Rq, Rz, and Ry. Data were analyzed by one-way ANOVA, Tukey's post hoc and Student-Newman-Keuls post hoc tests. The pH values of the soft drinks ranged from 2.52 (Guarana) to 4.21 (strawberry yoghurt). Orange juice had the highest TA, requiring 5.70 ml of NaOH to reach pH 7.0, whereas Coca-Cola required only 1.87 ml. Roughness parameters indicated that Coca-Cola had the strongest erosion potential during the 15 min of exposure, while Coca-Cola and orange juice were similar during 30- and 60-min exposures. There were no significant differences related to all exposure times between Guarana and Cedevita. Strawberry yoghurt did not erode the enamel surface regardless of the exposure time. All of the tested soft drinks except yoghurt were erosive. Erosion of the enamel surfaces exposed to Coca-Cola, orange juice, Cedevita, and Guarana was directly proportional to the exposure time. © 2015 S. Karger AG, Basel.

Sugar-sweetened soft drinks are associated with poorer cognitive function in individuals with type 2 diabetes: the Maine-Syracuse Longitudinal Study.

Science.gov (United States)

Crichton, Georgina E; Elias, Merrill F; Torres, Rachael V

2016-04-01

The importance of adequate nutrition on cognitive performance is well recognised. Greater intakes of soft drinks are associated with a higher risk for type 2 diabetes, as well as other cardiometabolic diseases. A few studies have specifically examined whether the intake of soft drinks may be related to cognitive function. The aim of this study was to investigate whether soft drink intakes, including both sugar-sweetened and diet beverages, are associated with cognitive function, with adjustment for cardiovascular, lifestyle and dietary factors, and stratified according to type 2 diabetes status. Cross-sectional analyses were undertaken using 803 community-dwelling participants, aged 23-98 years, from the Maine-Syracuse Longitudinal Study. Cognitive function was measured using an extensive battery of neuropsychological tests. Usual dietary intake of soft drinks was assessed using a FFQ. Stratification by type 2 diabetes indicated that a greater intake of sugar-sweetened soft drinks was significantly associated with poorer performance in visual spatial memory, working memory, scanning and tracking, executive function, the global composite and the Mini-Mental State Examination in diabetic individuals. These relations were not attenuated with statistical control for BMI and other cardiovascular, lifestyle and dietary factors. Diet soft drink intake was unrelated to cognitive performance. Frequent sugar-sweetened soft drink intake was associated with poorer cognitive performance, particularly in individuals with type 2 diabetes, but the underlying causal mechanisms are yet to be determined. Longitudinal studies are needed to clarify these findings and the underlying causal mechanisms.

Risk of colon cancer and coffee, tea, and sugar-sweetened soft drink intake: Pooled analysis of prospective cohort studies

NARCIS (Netherlands)

Zhang, X.; Albanes, D.; Beeson, W.L.; Brandt, P.A. van den; Buring, J.E.; Flood, A.; Freudenheim, J.L.; Giovannucci, E.L.; Goldbohm, R.A.; Jaceldo-Siegl, K.; Jacobs, E.J.; Krogh, V.; Larsson, S.C.; Marshall, J.R.; McCullough, M.L.; Miller, A.B.; Robien, K.; Rohan, T.E.; Schatzkin, A.; Sieri, S.; Spiegelman, D.; Virtamo, J.; Wolk, A.; Willett, W.C.; Zhang, S.M.; Smith-Warner, S.A.

2010-01-01

BackgroundThe relationships between coffee, tea, and sugar-sweetened carbonated soft drink consumption and colon cancer risk remain unresolved. MethodsWe investigated prospectively the association between coffee, tea, and sugar-sweetened carbonated soft drink consumption and colon cancer risk in a

Spectrophotometric determination of cyclamate in soft drinks and desserts: complementary collaborative study.

Science.gov (United States)

Sjöberg, A M

1988-01-01

Fifteen official food control laboratories participated in a collaborative study of a spectrophotometric method to determine cyclamate in a soft drink and a dessert at concentrations of 90-311 mg/L and 202-526 mg/kg, respectively, with blind duplicates and a blank. Average recovery from the soft drink was 97.5%, and from the dessert, 98.6%. Reproducibility relative standard deviations were 4.7-6.5% and 6.9-8.5%, respectively. The outlier percentage was 5.5%. This study complements an earlier work by leading Nordic food laboratories and was designed according to the latest recommendations. The results of this study were compared with those of the earlier collaborative study and with general collaborative results obtained by AOAC.

Introduction of soft drinks and processed juice in the diet of infants attending public day care centers

Science.gov (United States)

Longo-Silva, Giovana; Toloni, Maysa Helena de Aguiar; de Menezes, Risia Cristina Egito; Asakura, Leiko; Oliveira, Maria Alice Araújo; Taddei, José Augusto de Aguiar Carrazedo

2015-01-01

OBJECTIVE: Identifying at what age infants enrolled in public day care centers are introduced to soft drinks and industrialized juice, as well as comparing the nutritional composition of these goods with natural fruit juice. METHODS: A cross-sectional study with the mothers of 636 children (aged 0 to 36 months) from nurseries of day care centers, who were asked questions about the age of feeding introduction. This study evaluated the proximate composition of soft drinks and artificial juice, comparing them with those of natural fruit juice regarding energy, sugar, fiber, vitamin C, and sodium values. The chemical composition of fruit juice was obtained by consulting the Table of Food Composition and, for industrialized drinks, the average nutritional information on the labels of the five most consumed product brands. RESULTS: The artificial drinks were consumed before the first year of life by more than half of the children studied, however, approximately 10% consumed them before the age of 6 months. With regard to the comparison among the drinks, artificial fruit juice beverages and soft drinks proved to contain from nine to 13 times higher amounts of sodium, and 15 times less vitamin C than natural juices. CONCLUSIONS: The introduction of soft drinks and industrialized juice in the diet of infants was inopportune and premature.. When compared to natural fruit juice, these have inferior nutritional composition, which suggests the urgent need for measures based on strategies for food and nutrition education in order to promote awareness and the maintenance of healthy eating habits. PMID:25662561

Introduction of soft drinks and processed juice in the diet of infants attending public day care centers

Directory of Open Access Journals (Sweden)

Giovana Longo-Silva

2015-03-01

Full Text Available OBJECTIVE: Identifying at what age infants enrolled in public day care centers are introduced to soft drinks and industrialized juice, as well as comparing the nutritional composition of these goods with natural fruit juice. METHODS: A cross-sectional study with the mothers of 636 children (aged 0 to 36 months from nurseries of day care centers, who were asked questions about the age of feeding introduction. This study evaluated the proximate composition of soft drinks and artificial juice, comparing them with those of natural fruit juice regarding energy, sugar, fiber, vitamin C, and sodium values. The chemical composition of fruit juice was obtained by consulting the Table of Food Composition and, for industrialized drinks, the average nutritional information on the labels of the five most consumed product brands. RESULTS: The artificial drinks were consumed before the first year of life by more than half of the children studied, however, approximately 10% consumed them before the age of 6 months. With regard to the comparison among the drinks, artificial fruit juice beverages and soft drinks proved to contain from nine to 13 times higher amounts of sodium, and 15 times less vitamin C than natural juices. CONCLUSIONS: The introduction of soft drinks and industrialized juice in the diet of infants was inopportune and premature.. When compared to natural fruit juice, these have inferior nutritional composition, which suggests the urgent need for measures based on strategies for food and nutrition education in order to promote awareness and the maintenance of healthy eating habits.

Erosive Effect of Different Soft Drinks on Enamel Surface in vitro: Application of Stylus Profilometry

OpenAIRE

Barac, Radomir; Gasic, Jovanka; Trutic, Natasa; Sunaric, Slavica; Popovic, Jelena; Djekic, Petar; Radenkovic, Goran; Mitic, Aleksandar

2015-01-01

Objective To assess the erosive potential of various soft drinks by measuring initial pH and titratable acidity (TA) and to evaluate enamel surface roughness using different exposure times. Materials and Methods The initial pH of the soft drinks (group 1: Coca-Cola; group 2: orange juice; group 3: Cedevita; group 4: Guarana, and group 5: strawberry yoghurt) was measured using a pH meter, and TA was measured by titration with NaOH. Enamel samples (n = 96), cut from unerupted human third molars...

Evaluation of complex lifting index in Ahvaz Soft Drink Industries using equation of NIOSH

Directory of Open Access Journals (Sweden)

M Amozadeh

2005-10-01

Full Text Available Background and Aim: Most of normal activities and jobs requires handling of load with the helpof hands and body which is called as "Manual Materials Handling". Manual handling whether forlong of short time causes problems as tear, break, tension in cardiovascular system as increase ofheart pulse and blood hypertension, muscles tire and muscles-bones disorders specially for spinalcords and finally to the back. For instance a report from Britain proved that 61% accidents causingpremature retirement (12.5% of total accidents was about back injury for which 74% was due tolifting and handling.Method: In this research complex lifting index is evaluated in Ahwaz soft drink industries throughequation of National Institute for Occupational Safety and Health (NIOSH 1994 of Units State ofAmerica. Section for handling empty soft drink boxes toward washing area was selected asworking station for this research. Boxes are piled up for 5 pieces and the worker must put them onthe conveyance belt one by one. Since there is complex manual handling system in this stationthus lifting index after determination of NIOSH equation parameters is calculated in the form ofcomplex and then interpreted on the basis of advice of NIOSH.Results:First stage is for determination of (FIRWL and Frequency Independent Lifting Index.The results proved that FIRWL for every box of soft drinks is higher than weight of the land(FIRWL>1 and the rate of Frequency Independent Lifting Index for every floor is less than 1(FILI 1. Lifting index for every floor of soft drink boxes except fifth floor is less than 1.(STLI1to3 1. This proves physical stressof worker in fifth floor. Third stage is for determination of Complex Lifting Index (CLI. Indeedthis index shows cumulative effects of lifting resulted from 5 floors of soft drink boxes. Based onobtained results this index is 2.68. (CLI 2.68 which proves physical stress among the workersduring handling soft drink boxes.Conclusion: In this

In vitro evaluation of the erosive potential of viscosity-modified soft acidic drinks on enamel.

Science.gov (United States)

Aykut-Yetkiner, Arzu; Wiegand, Annette; Ronay, Valerie; Attin, Rengin; Becker, Klaus; Attin, Thomas

2014-04-01

The objective of this in vitro study was to investigate the effect of viscosity-modified soft acidic drinks on enamel erosion. A total of 108 bovine enamel samples (∅ = 3 mm) were embedded in acrylic resin and allocated into six groups (n = 18). Soft acidic drinks (orange juice, Coca-Cola, Sprite) were used both in their regular forms and at a kinetic viscositiy of 5 mm(2)/s, which was adjusted by adding hydroxypropyl cellulose. All solutions were pumped over the enamel surface from a reservoir with a drop rate of 3 ml/min. Each specimen was eroded for 10 min at 20 °C. Erosion of enamel surfaces was measured using profilometry. Data were analyzed using independent t tests and one-way ANOVAs (p Coca-Cola, 5.60 ± 1.04 μm; Sprite, 5.49 ± 0.94 μm; orange juice, 1.35 ± 0.4 μm) than for the viscosity-modified drinks (Coca-Cola, 4.90 ± 0.34 μm; Sprite, 4.46 ± 0.39 μm; orange juice, 1.10 ± 0.22 μm). For both regular and viscosity-modified forms, Coca-Cola and Sprite caused higher enamel loss than orange juice. Increasing the viscosity of acidic soft drinks to 5 mm(2)/s reduced enamel erosion by 12.6-18.7 %. The erosive potential of soft acidic drinks is not only dependent on various chemical properties but also on the viscosity of the acidic solution and can be reduced by viscosity modification.

[Introduction of soft drinks and processed juice in the diet of infants attending public day care centers].

Science.gov (United States)

Longo-Silva, Giovana; Toloni, Maysa Helena de Aguiar; de Menezes, Risia Cristina Egito; Asakura, Leiko; Oliveira, Maria Alice Araújo; Taddei, José Augusto de Aguiar Carrazedo

2015-01-01

Identifying at what age infants enrolled in public day care centers are introduced to soft drinks and industrialized juice, as well as comparing the nutritional composition of these goods with natural fruit juice. A cross-sectional study with the mothers of 636 children (aged 0 to 36 months) from nurseries of day care centers, who were asked questions about the age of feeding introduction. This study evaluated the proximate composition of soft drinks and artificial juice, comparing them with those of natural fruit juice regarding energy, sugar, fiber, vitamin C, and sodium values. The chemical composition of fruit juice was obtained by consulting the Table of Food Composition and, for industrialized drinks, the average nutritional information on the labels of the five most consumed product brands. The artificial drinks were consumed before the first year of life by more than half of the children studied, however, approximately 10% consumed them before the age of 6 months. With regard to the comparison among the drinks, artificial fruit juice beverages and soft drinks proved to contain from nine to 13 times higher amounts of sodium, and 15 times less vitamin C than natural juices. The introduction of soft drinks and industrialized juice in the diet of infants was inopportune and premature. When compared to natural fruit juice, these have inferior nutritional composition, which suggests the urgent need for measures based on strategies for food and nutrition education in order to promote awareness and the maintenance of healthy eating habits. Copyright © 2014 Associação de Pediatria de São Paulo. Publicado por Elsevier Editora Ltda. All rights reserved.

The Feasibility of Noise Control in a Soft Drink Plant

Directory of Open Access Journals (Sweden)

Fouladi Dehaghi

2016-03-01

Full Text Available Background “Noise” can be defined as any unwanted sound. Soft drink plants, which produce the raw materials used in most carbonated beverage factories, are sources of noise. Objectives This study investigated the noise pollution present in a soft drink CO2 gas injection plant, in order to present noise control measures. Materials and Methods The instructions specified by the canadian center for occupational health and safety (CCOHS were followed during the noise study, and a sound level meter, CEL.450 calibrated with CEL-110.2 based on ISO-9612 methods, was used to record the sound pressure level (SPL at each grid point. SPL was determined in weighting scales A and C. and a noise survey map of equivalent SPLs was drawn for each part. Each part of the floor area of the soft drink factory where SPL exceeded 85 dBA was identified from the noise survey map to determine the causes of high levels of noise. In order to reduce noise level in each part, the absorption coefficient, transmission loss, and noise reduction rate were calculated in the proposed control area. Results According to the study results, noise levels in a CO2 plant’s house and control room ranged from 88 to 102 dB and 79 to 82 dB (A, respectively. In order to reduce the amount of emitted noise in the CO2 plant house and control room, a noise control plan was implemented in each part of the facility; it was met with effective results. Conclusions The findings of this investigation have clearly revealed that plant workers are at risk of developing noise-induced hearing loss. However, after the implementation of a noise control plan in each part of the facility, the noise dose received by workers has significantly decreased. The need to implement a noise conservation program was established.

Chronic effects of soft drink consumption on the health state of Wistar rats: A biochemical, genetic and histopathological study

OpenAIRE

ALKHEDAIDE, ADEL; SOLIMAN, MOHAMED MOHAMED; SALAH-ELDIN, ALAA-ELDIN; ISMAIL, TAMER AHMED; ALSHEHIRI, ZAFER SAAD; ATTIA, HOSSAM FOUAD

2016-01-01

The present study was performed to examine the effects of chronic soft drink consumption (SDC) on oxidative stress, biochemical alterations, gene biomarkers and histopathology of bone, liver and kidney. Free drinking water of adult male Wistar rats was substituted with three different soft drinks: Coca-Cola, Pepsi and 7-Up, for three consecutive months. The serum and organs were collected for examining the biochemical parameters associated with bone, liver and kidney functions. Semi-quantitat...

Ocular injuries from carbonated soft drink bottle explosions.

OpenAIRE

Al Salem, M; Sheriff, S M

1984-01-01

Sixteen cases of ocular injuries serious enough to require admission to Ibn-Sina Hospital, Kuwait, Arabian Gulf, due to explosion of glass bottles of carbonated soft drinks are reported over a period of 14 months from the beginning of July 1981 to the end of August 1982. Prevalence was much greater in the summer months and among children. Explosions of bottles without prior agitation occurred in 11 cases (68.7%). High environmental temperature and defective bottles were the most important pre...

Relationship between Soft Drink Consumption and Obesity in 9–11 Years Old Children in a Multi-National Study

Science.gov (United States)

Katzmarzyk, Peter T.; Broyles, Stephanie T.; Champagne, Catherine M.; Chaput, Jean-Philippe; Fogelholm, Mikael; Hu, Gang; Kuriyan, Rebecca; Kurpad, Anura; Lambert, Estelle V.; Maia, Jose; Matsudo, Victor; Olds, Timothy; Onywera, Vincent; Sarmiento, Olga L.; Standage, Martyn; Tremblay, Mark S.; Tudor-Locke, Catrine; Zhao, Pei

2016-01-01

The purpose of this study was to determine the association between regular (sugar containing) and diet (artificially sweetened) soft drink consumption and obesity in children from 12 countries ranging in levels of economic and human development. The sample included 6162 children aged 9–11 years. Information on soft drink consumption was obtained using a food frequency questionnaire. Percentage body fat (%BF) was estimated by bio-electrical impedance analysis, body mass index (BMI) z-scores were computed using World Health Organization reference data, and obesity was defined as a BMI > +2 standard deviations (SD). Multi-level models were used to investigate trends in BMI z-scores, %BF and obesity across categories of soft drink consumption. Age, sex, study site, parental education and physical activity were included as covariates. There was a significant linear trend in BMI z-scores across categories of consumption of regular soft drinks in boys (p = 0.049), but not in girls; there were no significant trends in %BF or obesity observed in either boys or girls. There was no significant linear trend across categories of diet soft drink consumption in boys, but there was a graded, positive association in girls for BMI z-score (p = 0.0002) and %BF (p = 0.0001). Further research is required to explore these associations using longitudinal research designs. PMID:27916866

Does cheese intake blunt the association between soft drink intake and risk of the metabolic syndrome? Results from the cross-sectional Oslo Health Study.

Science.gov (United States)

Høstmark, Arne Torbjørn; Haug, Anna

2012-01-01

A high soft drink intake may promote, whereas intake of cheese may reduce risk of the metabolic syndrome (MetS), but will cheese intake blunt the soft drink versus MetS association? Cross-sectional study. The Oslo Health Study. Among the 18 770 participants of the Oslo Health Study there were 5344 men and 6150 women having data on cheese and soft drink intake and on risk factors for MetS, except for fasting glucose. The MetSRisk index=the weighted sum of triglycerides (TG), systolic blood pressure, diastolic blood pressure, waist circumference and body mass index (BMI) divided by high-density lipoprotein (HDL) were used as a combined risk estimate to examine the cheese/soft drink versus MetS interaction, and the SumRisk index was used to assess whether increasing intake of soft drinks/cheese would include an increasing number of MetS factors being above the cut-off values. We analysed the data using non-parametric correlation and analysis of covariance (ANCOVA). In all three groups of soft drink intake (seldom/rarely, 1-6 glasses/week, ≥1 glass/day), there was a negative cheese versus MetSRisk correlation (p≤0.003), but in the highest intake group the influence of cheese seemed to level off, suggesting interaction. However, there was no interaction between cheese and soft drinks within the fully adjusted models. Conversely, at all four levels of cheese intake, MetSRisk increased with an increasing intake of soft drinks (p≤0.001 at all cheese levels). Similar associations were found with the SumRisk index. When controlling for a large number of covariates (eg, sex, age group, smoking, education, physical activity, intake of fruits/berries and vegetables), the above associations prevailed. Cheese intake blunted the association between soft drink intake and MetS, an influence possibly related to fatty acid desaturation, or to undetected covariates.

Soft drink prices, sales, body mass index and diabetes: Evidence from a panel of low-, middle- and high-income countries.

Science.gov (United States)

Goryakin, Yevgeniy; Monsivais, Pablo; Suhrcke, Marc

2017-12-01

We take advantage of four different cross-country datasets containing data on 78 countries for the period 1999-2014, in order to assess the relationship of carbonated soft drinks' sales, as well as their prices, with body mass index (BMI), overweight, obesity and diabetes. Using an ecological study design and multivariate regression longitudinal estimation approaches, we find that carbonated soft drink sales were significantly positively related to BMI, overweight and obesity - but only in the low and lower-middle income countries. This finding was robust to a number of sensitivity and falsification checks. In this sub-sample, an increase in per capita soft drink sales by 1 litre per year was related to an increase of BMI by about 0.009 kg/m 2 (p < 0.1).. This is a small effect, implying that halving annual consumption per capita in this group of countries would result in a drop of BMI by only about 0.03 kg/m 2 . Although soft drink prices were negatively related to weight-related outcomes in the sample of higher middle income and high income countries, this finding was not robust to falsification checks. The results thus suggest that sales restrictions to steer consumers away from soft drinks could indeed have a beneficial health effects in poorer countries, although the effect magnitude appears to be very small. However, given potential limitations of using ecological research design, results from individual level studies would be required to further ascertain the role of soft drink sales and prices in obesity and diabetes.

The color red reduces snack food and soft drink intake.

Science.gov (United States)

Genschow, Oliver; Reutner, Leonie; Wänke, Michaela

2012-04-01

Based on evidence that the color red elicits avoidance motivation across contexts (Mehta & Zhu, 2009), two studies investigated the effect of the color red on snack food and soft drink consumption. In line with our hypothesis, participants drank less from a red labeled cup than from a blue labeled cup (Study 1), and ate less snack food from a red plate than from a blue or white plate (Study 2). The results suggest that red functions as a subtle stop signal that works outside of focused awareness and thereby reduces incidental food and drink intake. Copyright © 2012 Elsevier Ltd. All rights reserved.

Microbial quality of soft drinks served by the dispensing machines in fast food restaurants and convenience stores in Griffin, Georgia, and surrounding areas.

Science.gov (United States)

Park, Yoen Ju; Chen, Jinru

2009-12-01

This study was undertaken to evaluate the microbial quality of the soft drinks served by fast food restaurants and gas station convenience stores in Griffin, GA, and surrounding areas. The soft drinks were collected from the dispensing machines in 8 fast food restaurants or gas station convenience stores in 2005 (n = 25) and in 10 fast food restaurants or gas station convenience stores in 2006 (n = 43) and 2007 (n = 43). One hundred milliliters of each soft drink was filtered through a hydrophobic grid membrane filter. The remaining portion of the soft drink was kept at room temperature for 4 h before sampling in order to mimic the possible holding time between purchase and consumption. The membrane filters were sampled for total aerobic bacteria, Enterobacteriaceae, lactic acid bacteria, and yeasts and molds. The microbial counts in the 2006 samples were numerically higher than the counts in the 2007 samples except for the average lactic acid bacteria counts, and were either significantly or numerically higher than the counts in the 2005 samples. Soft drinks sampled after the 4-h holding period had relatively higher counts than those sampled initially, with a few exceptions. Some soft drinks had over 4 log CFU/100 ml of total aerobic bacteria, Enterobacteriaceae, lactic acid bacteria, and yeast and mold cells. The study revealed the microbial quality of soft drinks served by dispensing machines in Griffin, GA, and surrounding areas, emphasizing the importance of effective sanitizing practice in retail settings.

Quantification of Sugars in Soft Drinks and Fruit Juices by Density ...

African Journals Online (AJOL)

The amount of sugar in soft drinks and fruit juices has been quantified by density, refractometric and infrared spectroscopic methods. Density and refractometric methods can be used to obtain only the total amount of sugar. However, infrared spectroscopy distinguishes itself as a fast and reliable method for quantitative ...

Quantification of Sugars in Soft Drinks and Fruit Juices by Density ...

African Journals Online (AJOL)

The amount of sugar in soft drinks and fruit juices has been quantified by density, refractometric and infrared spectroscopic ... Introduction. Sugars are major sources of energy for all living entities. Plants produce sugars by photosynthesis and convert them into various disaccharides such as sucrose, or convert them into.

Konsumsi fast food dan soft drink sebagai faktor risiko obesitas pada remaja

Directory of Open Access Journals (Sweden)

Ayu Rafiony

2015-04-01

Full Text Available Background: Recently, obesity has become health problem which was frequently associated with an increased occurrence of non-communicable diseases. The prevalence of obesity has been increasing in both developed and developing countries. The increasing prevalence of obesity was marked by a shift in eating pattern composition containing high fat, cholesterol, but low in fiber such as consumption of fast food and soft drinks. The imbalance of nutrient intake was one of the risk factors for the emergence of obesity in adolescents. Obesity in adolescents at risk of becoming obese in adulthood and potentially can lead to cardiovascular and metabolic diseases Objective: This study aimed to find out the prevalence of obesity and to investigate risk factors for energy intake and frequency of consumption of fast food and soft drinks on the incidence of obesity in high school students in Pontianak. Method: This research was an observational study which involves case-control design. The samples in this study are 160 students consisting of 80 obese high school teenagers and 80 non-obese high school teenagers. The choice for a subject of research used proportional stratified random sampling. Measurement of obesity status subject was taken by the measurement of weight and height based on the reference standard WHO / NCHS. It also involves data intake of fast food and soft drinks based on interviews with SQFFQ. Data were analyzed by chi-square test, t-test, and logistic regression. Results: The prevalence of obesity in high school teenagers in Pontianak was 9.29%. The bivariate test result showed no association  between total  energy intake of fast food and obesity (p0.05. There was a relationship between the frequency of total  fast food and of the local fast food consumption with obesity (p0.05. Multivariable analysis showed that the total energy intake was the most dominant factor to the onset of obesity (p<0.05; OR=5.27; 95% CI: 1.64-16.97. Conclusion

Trade and investment liberalization, food systems change and highly processed food consumption: a natural experiment contrasting the soft-drink markets of Peru and Bolivia.

Science.gov (United States)

Baker, Phillip; Friel, Sharon; Schram, Ashley; Labonte, Ron

2016-06-02

Free trade agreements (FTAs) can affect food environments and non-communicable disease risks through altering the availability of highly-processed foods. Few studies have quantified such effects. Using a natural experiment this paper quantifies changes in Peru's soft-drink market before/after entry into the US-Peru FTA, compared with Bolivia, a county with no such agreement. Difference-in-difference models were used to test for between country differences in the rate of per capita foreign direct investment (FDI) inflows, soft-drink imports, the volumes of various soft-drinks sold, and the volumes of sugar from soft-drinks before/after FTA ratification (2006) and enforcement (2009). In Peru average per capita FDI-inflows rose from US$103.11 in the pre-ratification period to US$269.79 post-ratification, with little change in Bolivia. This corresponded with a 122 % increase in Peruvian soft-drink production. There was a significant between-country difference in FDI-inflows pre-/post-ratification (DID:1.07, 95 % CI:0.19-1.96; p = 0.01). Despite little difference in total per capita soft-drink sales volumes there was a significant between-country difference in per capita sugar from soft-drinks pre-/post enforcement (DID:-0.99, 95 % CI: -1.91-0.06; p = 0.03) with stagnated growth in Peru and continued growth in Bolivia. This resulted from stagnated sugar sweetened carbonates growth and increased bottled water, juice and sports & energy drinks growth in Peru, with continued carbonates growth in Bolivia. There was a significant between-country difference in per capita carbonates (DID: -1.44, 95 % CI: -2.52-0.36, p = 0.01) and bottled water (DID:0.63; 95 % CI: -0.01-1.26; p = 0.04) sales volumes. The FTA may have resulted in increased FDI-inflows and soft-drink production and also contributed to the diversification of soft drinks produced and sold in Peru with some positive (stagnated carbonates and increased bottled water) and some negative (increased

Replacement of milk fat by mixed vegetable oils in manufacturing soft cheese treated by gamma irradiation

International Nuclear Information System (INIS)

Afifi, E.A.; Anwar, M.M.

2007-01-01

This investigation aimed to study the possibility of substituting milk fat by using blended vegetable oils in manufacturing soft cheese with low salt content, in addition, lo utilize gamma irradiation to prolong the shelf-life of the new manufactured product. Therefore, one hundred (lOOKg) from fresh buffaloes milk containing 5 % milk fal and 3 % salt were divided into tow parts , the first part was used for manufacturing control soft cheese sample (containing milk fat ), while the second part was skimmed, blended with blended vegetable oils and homogenized. The skim homogenized milk containing 5% mixed vegetable oils used for manufacturing soft cheese ( new product filled ). The obtained soft cheese was subjected to 1, 2 and 3 kGy y-irradiation, and stored at refrigerator temperature. During cold storage, the sensory, microbial and chemical properties of control soft cheese and treated one were evaluated. The obtained results indicated that the replacement of milk fat by mixed vegetable oils in the manufacturing soft cheese had no effect on chemical composition and sensory properties except white color and slight oily flavor which have been noticed in treated filled cheese. In addition, irradiation dose of 3 kGy prolonged the shelf-life of treated filled cheese to 42 days compared to 18 days for control sample and scqueiitly, the new product high percentage of iinsaluraled fatly acid and no cholesterol compared with cheese made from natural milk and can be recommended as a healthy food especially for those who need to low or free cholesterol foods

Determinants and patterns of soft drink consumption in young adults: a qualitative analysis.

Science.gov (United States)

Hattersley, Libby; Irwin, Melissa; King, Lesley; Allman-Farinelli, Margaret

2009-10-01

To explore knowledge, attitudes and behaviours regarding caloric soft drinks in a group of young adults attending university and to identify opportunities for a health promotion intervention aimed at reducing consumption. In-depth, semi-structured focus groups segmented by gender. Sydney, Australia. Undergraduate University of Sydney students aged 18-30 years (n 35). Social and environmental cues, intrinsic qualities of beverages and personal health beliefs were identified as important influences on consumption. Social cues included settings in which alcohol is usually consumed, socialising with friends, and family influences. Environmental cues included purchasing of fast foods, and ready availability, preferential pricing and promotion of caloric beverages. Reinforcing intrinsic qualities of caloric soft drinks included taste, sugar and caffeine content, and their association with treats and rewards. Major gender differences as well as variations in individual readiness for behaviour change were observed. Raising awareness of the sugar content of various beverages and the potential health impacts associated with their consumption was considered important. The findings provide new insights with important implications for policy and practice, and suggest that there is considerable scope for promoting awareness in this group. Carefully designed social marketing campaigns highlighting the health issues and addressing social and environmental cues relating to caloric soft drink consumption are required. There is a need for gender-differentiated intervention programmes which are both informational and appealing to young adults. Further research is warranted, particularly to investigate beverage consumption relating to fast-food meal deals and young adults' consumption patterns in more depth.

Soft computing in design and manufacturing of advanced materials

Science.gov (United States)

Cios, Krzysztof J.; Baaklini, George Y; Vary, Alex

1993-01-01

The potential of fuzzy sets and neural networks, often referred to as soft computing, for aiding in all aspects of manufacturing of advanced materials like ceramics is addressed. In design and manufacturing of advanced materials, it is desirable to find which of the many processing variables contribute most to the desired properties of the material. There is also interest in real time quality control of parameters that govern material properties during processing stages. The concepts of fuzzy sets and neural networks are briefly introduced and it is shown how they can be used in the design and manufacturing processes. These two computational methods are alternatives to other methods such as the Taguchi method. The two methods are demonstrated by using data collected at NASA Lewis Research Center. Future research directions are also discussed.

Consumption of bakery products, sweetened soft drinks and yogurt among children aged 6-7 years: association with nutrient intake and overall diet quality.

Science.gov (United States)

Rodríguez-Artalejo, Fernando; García, Esther López; Gorgojo, Lydia; Garcés, Carmen; Royo, Miguel Angel; Martín Moreno, José María; Benavente, Mercedes; Macías, Alfonso; De Oya, Manuel

2003-03-01

The present study tests the hypothesis that higher consumption of bakery products, sweetened soft drinks and yogurt is associated with higher intake of energy, saturated fats, sugars and worse overall diet quality among Spanish children. This is a cross-sectional study covering 1112 children aged 6.0-7.0 years in four Spanish cities. Nutrient and food intake were obtained through a food-frequency questionnaire, and overall diet quality calculated using the healthy-eating index (HEI) developed by Kennedy et al. (1995). Standardized methods were used to measure anthropometric variables. Associations of interest were summarized as the difference in nutrient and food consumption between the value of the fifth and the first quintile of consumption (dq) of bakery products, sweetened soft drinks or yogurt, adjusted for energy intake and BMI. Bakery products, sweetened soft drinks and yogurt supplied 15.5, 1.0 and 5.6 % energy intake respectively. Higher consumption of these three foods was associated with greater energy intake (Pbakery products was associated with the proportion of energy derived from intake of total carbohydrates (dq 4.5 %, Pbakery products, sweetened soft drinks and yogurt were usually very small. We conclude that the impact of the consumption of bakery products, sweetened soft drinks and yogurt on the quality of the diet of Spanish children is only modest, although it may contribute to aggravating certain unhealthy characteristics of their diet, particularly excess energy, saturated fats and sugars. Therefore, consumption of bakery products and sweetened soft drinks should be moderated, and priority given to consumption of low-fat, low-sugar yogurt.

Microbial community analysis of anaerobic reactors treating soft drink wastewater.

Directory of Open Access Journals (Sweden)

Takashi Narihiro

Full Text Available The anaerobic packed-bed (AP and hybrid packed-bed (HP reactors containing methanogenic microbial consortia were applied to treat synthetic soft drink wastewater, which contains polyethylene glycol (PEG and fructose as the primary constituents. The AP and HP reactors achieved high COD removal efficiency (>95% after 80 and 33 days of the operation, respectively, and operated stably over 2 years. 16S rRNA gene pyrotag analyses on a total of 25 biofilm samples generated 98,057 reads, which were clustered into 2,882 operational taxonomic units (OTUs. Both AP and HP communities were predominated by Bacteroidetes, Chloroflexi, Firmicutes, and candidate phylum KSB3 that may degrade organic compound in wastewater treatment processes. Other OTUs related to uncharacterized Geobacter and Spirochaetes clades and candidate phylum GN04 were also detected at high abundance; however, their relationship to wastewater treatment has remained unclear. In particular, KSB3, GN04, Bacteroidetes, and Chloroflexi are consistently associated with the organic loading rate (OLR increase to 1.5 g COD/L-d. Interestingly, KSB3 and GN04 dramatically decrease in both reactors after further OLR increase to 2.0 g COD/L-d. These results indicate that OLR strongly influences microbial community composition. This suggests that specific uncultivated taxa may take central roles in COD removal from soft drink wastewater depending on OLR.

Babies, soft drinks and snacks: a concern in low- and middle-income countries?

Science.gov (United States)

Huffman, Sandra L; Piwoz, Ellen G; Vosti, Stephen A; Dewey, Kathryn G

2014-10-01

Undernutrition in infants and young children is a global health priority while overweight is an emerging issue. Small-scale studies in low- and middle-income countries have demonstrated consumption of sugary and savoury snack foods and soft drinks by young children. We assessed the proportion of children 6-23 months of age consuming sugary snack foods in 18 countries in Asia and Africa using data from selected Demographic and Health Surveys and household expenditures on soft drinks and biscuits using data from four Living Standards Measurement Studies (LSMS). Consumption of sugary snack foods increased with the child's age and household wealth, and was generally higher in urban vs. rural areas. In one-third of countries, >20% of infants 6-8 months consumed sugary snacks. Up to 75% of Asian children and 46% of African children consumed these foods in the second year of life. The proportion of children consuming sugary snack foods was generally higher than the proportion consuming fortified infant cereals, eggs or fruit. Household per capita daily expenditures on soft drinks ranged from $0.03 to $0.11 in three countries for which LSMS data were available, and from $0.01 to $0.04 on biscuits in two LSMS. Future surveys should include quantitative data on the purchase and consumption of snack foods by infants and young children, using consistent definitions and methods for identifying and categorising snack foods across surveys. Researchers should assess associations between snack food consumption and stunting and overweight, and characterise household, maternal and child characteristics associated with snack food consumption. © 2014 The Authors. Maternal & Child Nutrition published by John Wiley & Sons Ltd.

Bisphenol A in soft drinks and canned foods and data evaluation.

Science.gov (United States)

Tzatzarakis, Manolis N; Karzi, Vasiliki; Vakonaki, Elena; Goumenou, Marina; Kavvalakis, Matthaios; Stivaktakis, Polychronis; Tsitsimpikou, Christina; Tsakiris, Ioannis; Rizos, Apostolos K; Tsatsakis, Aristidis M

2017-06-01

Bisphenol A (BPA) is one of the most common industrial chemicals and known to exert endocrine disruption activity. The aim of this study was the quantification of BPA in food stuffs on the Greek market. The applied liquid chromatography-mass spectrometry method was validated for linearity, limit of quantification, accuracy, precision and recovery. About 41.7% of the canned solid phase samples, 25.0% of the canned liquid phase samples and 43.8% of the soft drinks were positive. Mean BPA concentrations (range) were 33.4 ± 4.4 ng/g (4.90 ± 0.64-66.0 ± 8.6 ng/g) in canned solid phase, 2.70 ± 0.08 ng/ml (1.90 ± 0.06-3.50 ± 0.11 ng/ml) in canned liquid phase and 2.30 ± 0.18 ng/ml (0.40 ± 0.03-10.2 ± 0.8 ng/ml) in soft drinks. The results of this study are comparable with those reported in the literature according to which higher concentrations of BPA were detected in the solid fraction of canned food compared to their liquid fraction.

Higher consumption of sugar-sweetened soft drinks increases the risk of hyperuricemia in Korean population: The Korean Multi-Rural Communities Cohort Study.

Science.gov (United States)

Bae, Jisuk; Chun, Byung-Yeol; Park, Pil Sook; Choi, Bo Youl; Kim, Mi Kyung; Shin, Min-Ho; Lee, Young-Hoon; Shin, Dong Hoon; Kim, Seong-Kyu

2014-04-01

The clinical implication of sugar-sweetened soft drinks on the risk of hyperuricemia has increased, especially in Western population studies. The aim of this study is to clarify the association between sugar-sweetened soft drinks and fruit drinks made from oranges and apples and the risk of hyperuricemia in the Korean Multi-Rural Communities Cohort. A total of 9400 subjects were enrolled in the Korean Multi-Rural Communities Cohort Study, and a cross-sectional analysis was performed. Five quintiles (Q1-Q5) according to consumption of soft drinks and other fruit/fruit juices were classified and then categorized into three groups (Q1-Q3, Q4, and Q5) to assess the risk of hyperuricemia. Information on dietary intake was collected by well-trained interviewers using validated food frequency questionnaires. Higher consumption of sugar-sweetened soft drinks (Q5) increased the risk of hyperuricemia in males (adjusted OR = 1.35, 95% CI: 1.07-1.71) with a linear trend (p for trend = 0.01) and in females (adjusted OR = 1.40, 95% CI: 1.03-1.90) with no linear trend (p for trend = 0.09), compared to lower consumption (Q1-Q3). However, there were no significant differences of serum uric acid level according to the three categories of soft drink consumption, Q1-Q3, Q3, and Q5, in males (p = 0.21) or in females (p = 0.16), whereas all subjects showed statistical significance of serum uric acid level within the categories (p Korean population, showing a differential linear trend for hyperuricemia according to gender. © 2013 Published by Elsevier Inc.

Intake of high-fructose corn syrup sweetened soft drinks, fruit drinks and apple juice is associated with prevalent arthritis in US adults, aged 20-30 years.

Science.gov (United States)

DeChristopher, L R; Uribarri, J; Tucker, K L

2016-03-07

There is a link between joint and gut inflammation of unknown etiology in arthritis. Existing research indicates that regular consumption of high-fructose corn syrup sweetened (HFCS) soft drinks, but not diet soft drinks, may be associated with increased risk of seropositive rheumatoid arthritis (RA) in women, independent of other dietary and lifestyle factors. One unexplored hypothesis for this association is that fructose malabsorption, due to regular consumption of excess free fructose (EFF) and HFCS, contributes to fructose reactivity in the gastrointestinal tract and intestinal in situ formation of enFruAGEs, which once absorbed, travel beyond the intestinal boundaries to other tissues and promote inflammation. In separate studies, the accumulation of advanced glycation end-products has been associated with joint inflammation in RA. Objective of this study was to assess the association between EFF beverages intake and non-age, non-wear and tear-associated arthritis in US young adults. In this cross sectional study of 1209 adults aged 20-30y, (Nutrition and Health Examination Surveys 2003-2006) exposure variables were high EFF beverages, including HFCS sweetened soft drinks, and any combination of HFCS sweetened soft drinks, fruit drinks (FD) and apple juice, referred to as tEFF. Analyses of diet soda and diet FD were included for comparison. The outcome was self-reported arthritis. Rao Scott Ҳ(2) was used for prevalence differences and logistic regression for associations, adjusted for confounders. Young adults consuming any combination of high EFF beverages (tEFF) ⩾5 times/week (but not diet soda) were three times as likely to have arthritis as non/low consumers (odds ratios=3.01; p⩽0.021; 95% confidence intervals=1.20-7.59), independent of all covariates, including physical activity, other dietary factors, blood glucose and smoking. EFF beverage intake is significantly associated with arthritis in US adults aged 20-30 years, possibly due to the

Spillover Effects of TV Advertising: The Case of Carbonated Soft Drinks

OpenAIRE

Li, Xun; Lopez, Rigoberto A.

2012-01-01

This paper examines the spillover effects of television brand advertising on consumer demand for carbonated soft drinks using a nested logit model and household purchase and advertising data from nine U.S. cities over a three year period. Spillover effects are modeled using the conventional linear advertising production function with brand and company advertising, which assumes perfect substitution and constant returns to scale, and the results are compared to those attained via a constant el...

Non-targeted detection of chemical contamination in carbonated soft drinks using NMR spectroscopy, variable selection and chemometrics

Energy Technology Data Exchange (ETDEWEB)

Charlton, Adrian J. [Department for Environment, Food and Rural Affairs, Central Science Laboratory, Sand Hutton, York YO41 1LZ (United Kingdom)], E-mail: adrian.charlton@csl.gov.uk; Robb, Paul; Donarski, James A.; Godward, John [Department for Environment, Food and Rural Affairs, Central Science Laboratory, Sand Hutton, York YO41 1LZ (United Kingdom)

2008-06-23

An efficient method for detecting malicious and accidental contamination of foods has been developed using a combined {sup 1}H nuclear magnetic resonance (NMR) and chemometrics approach. The method has been demonstrated using a commercially available carbonated soft drink, as being capable of identifying atypical products and to identify contaminant resonances. Soft-independent modelling of class analogy (SIMCA) was used to compare {sup 1}H NMR profiles of genuine products (obtained from the manufacturer) against retail products spiked in the laboratory with impurities. The benefits of using feature selection for extracting contaminant NMR frequencies were also assessed. Using example impurities (paraquat, p-cresol and glyphosate) NMR spectra were analysed using multivariate methods resulting in detection limits of approximately 0.075, 0.2, and 0.06 mM for p-cresol, paraquat and glyphosate, respectively. These detection limits are shown to be approximately 100-fold lower than the minimum lethal dose for paraquat. The methodology presented here is used to assess the composition of complex matrices for the presence of contaminating molecules without a priori knowledge of the nature of potential contaminants. The ability to detect if a sample does not fit into the expected profile without recourse to multiple targeted analyses is a valuable tool for incident detection and forensic applications.

Non-targeted detection of chemical contamination in carbonated soft drinks using NMR spectroscopy, variable selection and chemometrics

International Nuclear Information System (INIS)

Charlton, Adrian J.; Robb, Paul; Donarski, James A.; Godward, John

2008-01-01

An efficient method for detecting malicious and accidental contamination of foods has been developed using a combined 1 H nuclear magnetic resonance (NMR) and chemometrics approach. The method has been demonstrated using a commercially available carbonated soft drink, as being capable of identifying atypical products and to identify contaminant resonances. Soft-independent modelling of class analogy (SIMCA) was used to compare 1 H NMR profiles of genuine products (obtained from the manufacturer) against retail products spiked in the laboratory with impurities. The benefits of using feature selection for extracting contaminant NMR frequencies were also assessed. Using example impurities (paraquat, p-cresol and glyphosate) NMR spectra were analysed using multivariate methods resulting in detection limits of approximately 0.075, 0.2, and 0.06 mM for p-cresol, paraquat and glyphosate, respectively. These detection limits are shown to be approximately 100-fold lower than the minimum lethal dose for paraquat. The methodology presented here is used to assess the composition of complex matrices for the presence of contaminating molecules without a priori knowledge of the nature of potential contaminants. The ability to detect if a sample does not fit into the expected profile without recourse to multiple targeted analyses is a valuable tool for incident detection and forensic applications

Chronic consumption of fructose rich soft drinks alters tissue lipids of rats

Directory of Open Access Journals (Sweden)

Botezelli Jose D

2010-06-01

Full Text Available Abstract Background Fructose-based diets are apparently related to the occurrence of several metabolic dysfunctions, but the effects of the consumption of high amounts of fructose on body tissues have not been well described. The aim of this study was to analyze the general characteristics and the lipid content of different tissues of rats after chronic ingestion of a fructose rich soft drink. Methods Forty-five Wistar rats were used. The rats were divided into three groups (n = 15 and allowed to consume water (C, light Coca Cola ® (L or regular Coca Cola® (R as the sole source of liquids for eight weeks. Results The R group presented significantly higher daily liquid intake and significantly lower food intake than the C and L groups. Moreover, relative to the C and L groups, the R group showed higher triglyceride concentrations in the serum and liver. However, the L group animals presented lower values of serum triglycerides and cholesterol than controls. Conclusions Based on the results, it can be concluded that daily ingestion of a large amount of fructose- rich soft drink resulted in unfavorable alterations to the lipid profile of the rats.

Soft drink, software and softening of teeth: a case report of tooth wear in the mixed dentition due to a combination of dental erosion and attrition

NARCIS (Netherlands)

Gambon, D.L.; Brand, H.S.; Nieuw Amerongen, A.V.

2010-01-01

This case report describes a 9-year-old boy with severe tooth wear as a result of drinking a single glass of soft drink per day. This soft drink was consumed over a period of one to two hours, while he was gaming intensively on his computer. As a result, a deep bite, enamel cupping, sensitivity of

A Soft Tooling process chain employing Additive Manufacturing for injection molding of a 3D component with micro pillars

DEFF Research Database (Denmark)

Zhang, Yang; Pedersen, David Bue; Segebrecht Gøtje, Asger

2017-01-01

The purpose of the research presented in this paper is to investigate the capability of a soft tooling process chain employing Additive Manufacturing (AM) for preproduction of an insert with micro features by injection molding. The Soft Tooling insert was manufactured in a high temperature...... photopolymer by Digital Light Processing (vat photopolymerization). The mold cavity was formed by two insert halves, by design; both inserts have four angled tines, with micro holes (Ø200 μm, 200 μm deep) on the surface. Injection molding with polyethylene was used with the soft tool inserts to manufacture...

Soft drink effects on sensorimotor rhythm brain computer interface performance and resting-state spectral power.

Science.gov (United States)

Mundahl, John; Jianjun Meng; He, Jeffrey; Bin He

2016-08-01

Brain-computer interface (BCI) systems allow users to directly control computers and other machines by modulating their brain waves. In the present study, we investigated the effect of soft drinks on resting state (RS) EEG signals and BCI control. Eight healthy human volunteers each participated in three sessions of BCI cursor tasks and resting state EEG. During each session, the subjects drank an unlabeled soft drink with either sugar, caffeine, or neither ingredient. A comparison of resting state spectral power shows a substantial decrease in alpha and beta power after caffeine consumption relative to control. Despite attenuation of the frequency range used for the control signal, caffeine average BCI performance was the same as control. Our work provides a useful characterization of caffeine, the world's most popular stimulant, on brain signal frequencies and their effect on BCI performance.

Taste perception and implicit attitude toward sweet related to body mass index and soft drink supplementation.

Science.gov (United States)

Sartor, Francesco; Donaldson, Lucy F; Markland, David A; Loveday, Helina; Jackson, Matthew J; Kubis, Hans-Peter

2011-08-01

These studies examined the differences in sweet taste perception and implicit attitude toward sweet between normal-weight and overweight/obese adults; and tested the effects of soft drink consumption on sweet taste, explicit preference and implicit attitude toward sweet in normal-weight subjects. In study 1, normal-weight (n = 22) and overweight/obese (n = 11) adults were assessed for sweet taste intensity and pleasantness. Implicit attitude toward sweet was assessed by implicit association test (IAT). In study 2, normal-weight, lightly active adults (n = 12) underwent one month soft drink supplementation (≈760 ml/day). This increased their daily carbohydrate intake by 2.1 ± 0.2g/kg body weight. Sweet taste perception, explicit preference and implicit attitudes to sweet were assessed. In both studies salty taste was also assessed as a contrasting perception. Overweight/obese subjects perceived sweet and salty tastes as less intense (-23% and -19%, respectively) and reported higher IAT scores for sweet than normal-weight controls (2.1-fold). The supplementation changed sweet intensity/pleasantness ratings and it increased explicit preference (2.3-fold) for sweet in a subgroup of initial sucrose-dislikers. In conclusion, overweight/obese individuals are more implicitly attracted to sweet. One month of soft drink supplementation changed sweet taste perception of normal-weight subjects. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

The Effect of Two Soft Drinks on Bracket Bond Strength and on Intact and Sealed Enamel: An In Vitro Study.

Science.gov (United States)

Pasha, Azam; Sindhu, D; Nayak, Rabindra S; Mamatha, J; Chaitra, K R; Vishwakarma, Swati

2015-01-01

This study was conducted to evaluate the effect of two soft drinks, Coca-Cola and Mirinda orange on bracket bond strength, on adhesive remnant on teeth after debonding the bracket, and to observe by means of scanning electron microscope (SEM) the effect of these drinks on intact and sealed enamel. 120 non-carious maxillary premolar teeth already extracted for Orthodontic purposes were taken and divided into three groups, i.e., Coca-Cola drink, Mirinda orange, and control (artificial saliva) group. Brackets were bonded using conventional methods. Teeth were kept in soft drinks for 15 days, for 15 min, 3 times a day, separated by intervals of 2 h. At other times, they were kept in artificial saliva. The samples, thus obtained were evaluated for shear bond strength using the universal testing machine and subsequently subjected for adhesive remnant index (ARI) scores. SEM study on all the three groups was done for evaluating enamel surface of the intact and sealed enamel. The lowest mean resistance to shearing forces was shown by Mirinda orange group (5.30 ± 2.74 Mpa) followed by Coca-Cola group (6.24 ± 1.59 Mpa) and highest resistance to shearing forces by control group (7.33 ± 1.72 Mpa). The ARI scores revealed a cohesive failure in control samples and an adhesive failure in Mirinda and cola samples. SEM results showed areas of defect due to erosion caused by acidic soft drinks on intact and sealed enamel surface. Mirinda group showed the lowest resistance to shearing forces, followed by Coca-Cola group and with the highest resistance to shearing forces by the control group. There were significant differences between the control group and the study groups. Areas of defects, which were caused by erosion related to acidic soft drinks on the enamel surface around the adhesive, were seen. Areas of defects caused by Coca-Cola were more extensive when compared to Mirinda orange drink.

The Effect of Two Soft Drinks on Bracket Bond Strength and on Intact and Sealed Enamel: An In Vitro Study

Science.gov (United States)

Pasha, Azam; Sindhu, D; Nayak, Rabindra S; Mamatha, J; Chaitra, K R; Vishwakarma, Swati

2015-01-01

Background and Objectives: This study was conducted to evaluate the effect of two soft drinks, Coca-Cola and Mirinda orange on bracket bond strength, on adhesive remnant on teeth after debonding the bracket, and to observe by means of scanning electron microscope (SEM) the effect of these drinks on intact and sealed enamel. Methods: 120 non-carious maxillary premolar teeth already extracted for Orthodontic purposes were taken and divided into three groups, i.e., Coca-Cola drink, Mirinda orange, and control (artificial saliva) group. Brackets were bonded using conventional methods. Teeth were kept in soft drinks for 15 days, for 15 min, 3 times a day, separated by intervals of 2 h. At other times, they were kept in artificial saliva. The samples, thus obtained were evaluated for shear bond strength using the universal testing machine and subsequently subjected for adhesive remnant index (ARI) scores. SEM study on all the three groups was done for evaluating enamel surface of the intact and sealed enamel. Results: The lowest mean resistance to shearing forces was shown by Mirinda orange group (5.30 ± 2.74 Mpa) followed by Coca-Cola group (6.24 ± 1.59 Mpa) and highest resistance to shearing forces by control group (7.33 ± 1.72 Mpa). The ARI scores revealed a cohesive failure in control samples and an adhesive failure in Mirinda and cola samples. SEM results showed areas of defect due to erosion caused by acidic soft drinks on intact and sealed enamel surface. Conclusion: Mirinda group showed the lowest resistance to shearing forces, followed by Coca-Cola group and with the highest resistance to shearing forces by the control group. There were significant differences between the control group and the study groups. Areas of defects, which were caused by erosion related to acidic soft drinks on the enamel surface around the adhesive, were seen. Areas of defects caused by Coca-Cola were more extensive when compared to Mirinda orange drink. PMID:26668477

Chronic effects of soft drink consumption on the health state of Wistar rats: A biochemical, genetic and histopathological study

Science.gov (United States)

ALKHEDAIDE, ADEL; SOLIMAN, MOHAMED MOHAMED; SALAH-ELDIN, ALAA-ELDIN; ISMAIL, TAMER AHMED; ALSHEHIRI, ZAFER SAAD; ATTIA, HOSSAM FOUAD

2016-01-01

The present study was performed to examine the effects of chronic soft drink consumption (SDC) on oxidative stress, biochemical alterations, gene biomarkers and histopathology of bone, liver and kidney. Free drinking water of adult male Wistar rats was substituted with three different soft drinks: Coca-Cola, Pepsi and 7-Up, for three consecutive months. The serum and organs were collected for examining the biochemical parameters associated with bone, liver and kidney functions. Semi-quantitative reverse transcription polymerase chain reaction was used to observe the changes in the expression of genes in the liver and kidney, which are associated with oxidative stress resistance. Histopathological investigations were performed to determine the changes in bone, liver and kidney tissues using hematoxylin and eosin stains. SDC affected liver, kidney and bone function biomarkers. Soft drinks increased oxidative stress, which is represented by an increase in malondialdehyde and a decrease in antioxidant levels. SDC affected serum mineral levels, particularly calcium and phosphorus. Soft drinks downregulated the expression levels of glutathione-S-transferase and super oxide dismutase in the liver compared with that of control rats. Rats administered Coca-Cola exhibited a hepatic decrease in the mRNA expression of α2-macroglobulin compared with rats administered Pepsi and 7-Up. On the other hand, SDC increased the mRNA expression of α1-acid glycoprotein. The present renal studies revealed that Coca-Cola increased the mRNA expression levels of desmin, angiotensinogen and angiotensinogen receptor compared with the other groups, together with mild congestion in renal histopathology. Deleterious histopathological changes were reported predominantly in the bone and liver of the Coca-Cola and Pepsi groups. In conclusion, a very strict caution must be considered with SDC due to the increase in oxidative stress biomarkers and disruption in the expression of certain genes

Ultra-violet Spectrophotometric Determination of Caffeine in Soft and Energy Drinks Available in Yenagoa, Nigeria

OpenAIRE

Amos-Tautua; W. Bamidele Martin; E.R.E. Diepreye

2014-01-01

This study was carried out to determine the pH and levels of caffeine in eight brands of carbonated and energy drinks available in local market in Yenagoa, Nigeria. Quantitative analysis of caffeine was performed by a simple and fast standard UV spectrophotometric method, using carbon tetrachloride as the extracting solvent. Results showed that the pH of the beverages were slightly acidic ranging from 5.92-6.44. The minimum caffeine level was observed in the carbonated soft drink Coca Cola (4...

Control of three different continuous pharmaceutical manufacturing processes: Use of soft sensors.

Science.gov (United States)

Rehrl, Jakob; Karttunen, Anssi-Pekka; Nicolaï, Niels; Hörmann, Theresa; Horn, Martin; Korhonen, Ossi; Nopens, Ingmar; De Beer, Thomas; Khinast, Johannes G

2018-05-30

One major advantage of continuous pharmaceutical manufacturing over traditional batch manufacturing is the possibility of enhanced in-process control, reducing out-of-specification and waste material by appropriate discharge strategies. The decision on material discharge can be based on the measurement of active pharmaceutical ingredient (API) concentration at specific locations in the production line via process analytic technology (PAT), e.g. near-infrared (NIR) spectrometers. The implementation of the PAT instruments is associated with monetary investment and the long term operation requires techniques avoiding sensor drifts. Therefore, our paper proposes a soft sensor approach for predicting the API concentration from the feeder data. In addition, this information can be used to detect sensor drift, or serve as a replacement/supplement of specific PAT equipment. The paper presents the experimental determination of the residence time distribution of selected unit operations in three different continuous processing lines (hot melt extrusion, direct compaction, wet granulation). The mathematical models describing the soft sensor are developed and parameterized. Finally, the suggested soft sensor approach is validated on the three mentioned, different continuous processing lines, demonstrating its versatility. Copyright © 2018 Elsevier B.V. All rights reserved.

Evaluation of effectiveness of class-based nutrition intervention on changes in soft drink and milk consumption among young adults.

Science.gov (United States)

Ha, Eun-Jeong; Caine-Bish, Natalie; Holloman, Christopher; Lowry-Gordon, Karen

2009-10-26

During last few decades, soft drink consumption has steadily increased while milk intake has decreased. Excess consumption of soft drinks and low milk intake may pose risks of several diseases such as dental caries, obesity, and osteoporosis. Although beverage consumption habits form during young adulthood, which has a strong impact on beverage choices in later life, nutrition education programs on beverages are scarce in this population. The purpose of this investigation was 1) to assess soft drink and milk consumption and 2) to evaluate the effectiveness of 15-week class-based nutrition intervention in changing beverage choices among college students. A total of 80 college students aged 18 to 24 years who were enrolled in basic nutrition class participated in the study. Three-day dietary records were collected, verified, and analyzed before and after the intervention. Class lectures focused on healthful dietary choices related to prevention of chronic diseases and were combined with interactive hands on activities and dietary feedback. Class-based nutrition intervention combining traditional lecture and interactive activities was successful in decreasing soft drink consumption. Total milk consumption, specifically fat free milk, increased in females and male students changed milk choice favoring skim milk over low fat milk. (1% and 2%). Class-based nutrition education focusing on prevention of chronic diseases can be an effective strategy in improving both male and female college students' beverage choices. Using this type of intervention in a general nutrition course may be an effective approach to motivate changes in eating behaviors in a college setting.

Evaluation of effectiveness of class-based nutrition intervention on changes in soft drink and milk consumption among young adults

Directory of Open Access Journals (Sweden)

Holloman Christopher

2009-10-01

Full Text Available Abstract Background During last few decades, soft drink consumption has steadily increased while milk intake has decreased. Excess consumption of soft drinks and low milk intake may pose risks of several diseases such as dental caries, obesity, and osteoporosis. Although beverage consumption habits form during young adulthood, which has a strong impact on beverage choices in later life, nutrition education programs on beverages are scarce in this population. The purpose of this investigation was 1 to assess soft drink and milk consumption and 2 to evaluate the effectiveness of 15-week class-based nutrition intervention in changing beverage choices among college students. Methods A total of 80 college students aged 18 to 24 years who were enrolled in basic nutrition class participated in the study. Three-day dietary records were collected, verified, and analyzed before and after the intervention. Class lectures focused on healthful dietary choices related to prevention of chronic diseases and were combined with interactive hands on activities and dietary feedback. Results Class-based nutrition intervention combining traditional lecture and interactive activities was successful in decreasing soft drink consumption. Total milk consumption, specifically fat free milk, increased in females and male students changed milk choice favoring skim milk over low fat milk. (1% and 2%. Conclusion Class-based nutrition education focusing on prevention of chronic diseases can be an effective strategy in improving both male and female college students' beverage choices. Using this type of intervention in a general nutrition course may be an effective approach to motivate changes in eating behaviors in a college setting.

ANALISIS TOTAL PRODUCTIVE MAINTENANCE PADA LINE 8/CARBONATED SOFT DRINK PT COCA-COLA BOTTLING INDONESIA CENTRAL JAVA

Directory of Open Access Journals (Sweden)

Darminto Pujotomo

2012-02-01

Full Text Available PT. Coca-Cola Bottling Indonesia (CCBI Central Java merupakan salah satu perusahaan produsen minuman ringan yang terkemuka di Indonesia, dengan dua jenis kelompok produk yang dihasilkan yaitu minuman karbonasi/Carbonated Soft Drink (Coca-Cola, Sprite, dan Fanta dan non-karbonasi (Frestea dan Ades. Dalam usaha untuk mempertahankan mutu dan meningkatkan produktifitas, salah satu faktor yang harus diperhatikan adalah masalah perawatan fasilitas/mesin produksi.  Makalah ini membahas mengenai penyebab dan akibat yang ditimbulkan oleh breakdown mesin terjadi pada Line 8/Carbonated Soft Drink, khususnya pada conveyor, filler machine, dan bottle washer machine. Untuk mendapatkan mesin yang dapat terjaga keterandalannya dibutuhkan suatu konsep yang baik. Total Productive Maintenance (TPM merupakan sebuah konsep yang baik untuk merealisasikan hal tersebut. Konsep ini, selain melibatkan semua personil dalam perusahaan, juga bertujuan untuk merawat semua fasilitas produksi yang dimiliki perusahaan.Data yang digunakan merupakan data breakdown conveyor, filler machine, dan bottle washer machine dari ME Monthly Report PT.CCBI selama bulan Januari-Desember 2005 khususnya line 8. Selain itu makalah ini juga membahas performance maintenance PT. Coca-Cola Bottling Indonesia-Central Java, dengan memperhitungkan nilai Mean Time Beetwen Failure (MTBF, Mean Time To Repair (MTTR, serta Availability mesin, dengan menggunakan data record Line 8 selama bulan Mei 2006 sampai bulan Juli 2006. Sehingga nantinya akan diketahui informasi keadaan aktual dari perusahaan tentang sistem perawatannya, khususnya pada Line 8/Carbonated Soft Drink apakah baik atau buruk. Kata kunci : Total Production Maintenance, Conveyor, Filler Machine, Bottle Washer Machine, Performance Maintenance   PT. Coca-Cola Bottling Indonesia (CCBI-Central Java represent one of notable light beverage producer company in Indonesia, with two product group type yielded is carbonated beverage/Carbonated Soft

Preliminary study on aluminum-air battery applying disposable soft drink cans and Arabic gum polymer

Science.gov (United States)

Alva, S.; Sundari, R.; Wijaya, H. F.; Majlan, E. H.; Sudaryanto; Arwati, I. G. A.; Sebayang, D.

2017-09-01

This study is in relation to preliminary investigation of aluminium-air battery using disposable soft drink cans as aluminium source for anode. The cathode uses commercial porous carbon sheet to trap oxygen from air. This work applies a commercial cashing to place carbon cathode, electrolyte, Arabic gum polymer, and aluminium anode in a sandwich-like arrangement to form the aluminium-air battery. The Arabic gum as electrolyte polymer membrane protects anode surface from corrosion due to aluminium oxide formation. The study result shows that the battery discharge test using constant current loading of 0.25 mA yields battery capacity of 0.437 mAh with over 100 minute battery life times at 4M NaOH electrolyte and 20 % Arabic gum polymer as the best performance in this investigation. This study gives significant advantage in association with beneficiation of disposable soft drink cans from municipal solid waste as aluminium source for battery anode.

Determination of caffeine, theobromine and theophylline in Mate beer and Mate soft drinks by high-performance thin-layer chromatography.

Science.gov (United States)

Oellig, Claudia; Schunck, Jacob; Schwack, Wolfgang

2018-01-19

Mate beer and Mate soft drinks are beverages produced from the dried leaves of Ilex paraguariensis (Yerba Mate). In Yerba Mate, the xanthine derivatives caffeine, theobromine and theophylline, also known as methylxanthines, are important active components. The presented method for the determination of caffeine, theobromine and theophylline in Mate beer and Mate soft drinks by high-performance thin-layer chromatography with ultraviolet detection (HPTLC-UV) offers a fully automated and sensitive determination of the three methylxanthines. Filtration of the samples was followed by degassing, dilution with acetonitrile in the case of Mate beers for protein precipitation, and centrifugation before the extracts were analyzed by HPTLC-UV on LiChrospher silica gel plates with fluorescence indicator and acetone/toluene/chloroform (4:3:3, v/v/v) as the mobile phase. For quantitation, the absorbance was scanned at 274nm. Limits of detection and quantitation were 1 and 4ng/zone, respectively, for caffeine, theobromine and theophylline. With recoveries close to 100% and low standard deviations reliable results were guaranteed. Experimental Mate beers as well as Mate beers and Mate soft drinks from the market were analyzed for their concentrations of methylxanthines. Copyright © 2017 Elsevier B.V. All rights reserved.

In vivo effects of two acidic soft drinks on shear bond strength of metal orthodontic brackets with and without resin infiltration treatment.

Science.gov (United States)

Hammad, Shaza M; Enan, Enas T

2013-07-01

To evaluate the in vivo effects of two acidic soft drinks (Coca-Cola and Sprite) on the shear bond strength of metal orthodontic brackets with and without resin infiltration treatment. In addition, the enamel surface was evaluated, after debonding, using a scanning electron microscope. Sixty noncarious maxillary premolars, scheduled for extraction in 30 orthodontic patients, were used. Patients were randomly divided into two groups according to the soft drink tested (Coca-Cola or Sprite). In each group, application of resin infiltration (Icon. DMG, Hamburg, Germany) was done on one side only before bonding of brackets. Patients were told to rinse their mouth with their respective soft drink at room temperature for 5 minutes, three times a day for 3 months. Shear bond strength was tested with a universal testing machine. After shearing test, a scanning electron microscope was used to evaluate enamel erosion. Statistical analysis was performed by twoway analysis of variance followed by the least significant difference test. The Coca-Cola group without resin infiltration showed the lowest resistance to shearing forces. Scanning electron micrographs of both groups after resin application showed a significant improvement compared with results without resin use, as the enamel appeared smoother and less erosive. Pretreatment with the infiltrating resin has proved to result in a significant improvement in shear bond strength, regardless of the type of soft drink consumed.

Chronic effects of soft drink consumption on the health state of Wistar rats: A biochemical, genetic and histopathological study.

Science.gov (United States)

Alkhedaide, Adel; Soliman, Mohamed Mohamed; Salah-Eldin, Alaa-Eldin; Ismail, Tamer Ahmed; Alshehiri, Zafer Saad; Attia, Hossam Fouad

2016-06-01

The present study was performed to examine the effects of chronic soft drink consumption (SDC) on oxidative stress, biochemical alterations, gene biomarkers and histopathology of bone, liver and kidney. Free drinking water of adult male Wistar rats was substituted with three different soft drinks: Coca‑Cola, Pepsi and 7‑Up, for three consecutive months. The serum and organs were collected for examining the biochemical parameters associated with bone, liver and kidney functions. Semi‑quantitative reverse transcription polymerase chain reaction was used to observe the changes in the expression of genes in the liver and kidney, which are associated with oxidative stress resistance. Histopathological investigations were performed to determine the changes in bone, liver and kidney tissues using hematoxylin and eosin stains. SDC affected liver, kidney and bone function biomarkers. Soft drinks increased oxidative stress, which is represented by an increase in malondialdehyde and a decrease in antioxidant levels. SDC affected serum mineral levels, particularly calcium and phosphorus. Soft drinks downregulated the expression levels of glutathione‑S‑transferase and super oxide dismutase in the liver compared with that of control rats. Rats administered Coca‑Cola exhibited a hepatic decrease in the mRNA expression of α2‑macroglobulin compared with rats administered Pepsi and 7‑Up. On the other hand, SDC increased the mRNA expression of α1‑acid glycoprotein. The present renal studies revealed that Coca‑Cola increased the mRNA expression levels of desmin, angiotensinogen and angiotensinogen receptor compared with the other groups, together with mild congestion in renal histopathology. Deleterious histopathological changes were reported predominantly in the bone and liver of the Coca‑Cola and Pepsi groups. In conclusion, a very strict caution must be considered with SDC due to the increase in oxidative stress biomarkers and disruption in the expression

Dental erosion and severe tooth decay related to soft drinks: a case report and literature review*

OpenAIRE

Cheng, Ran; Yang, Hui; Shao, Mei-ying; Hu, Tao; Zhou, Xue-dong

2009-01-01

Soft drinks have many potential health problems. The inherent acids and sugars have both acidogenic and cariogenic potential, resulting in dental caries and potential enamel erosion. In this report we present a 25-year-old man complaining with the severe worn-out of the front teeth during the past 3 years. He had a history of drinking cola for more than 7 years and had a poor oral hygiene. Severe decays were present in the incisors and the canines, while less severe lesions were noted on the ...

Threshold value of enamel mineral solubility and dental erosion after consuming acidic soft drinks

Directory of Open Access Journals (Sweden)

Muhammad Ilyas

2011-09-01

Full Text Available Background: Dental erosion is irreversible and can caused by acidic soft drink consumption. Dental erosion prevention had already been done, but it still has not been satisfying since the consumption of acidic soft drink is still high. There is still no explanation about the threshold value of enamel mineral solubility and the occurance of dental erosion after consuming acidic soft drink. Purpose: This research is aimed to find the threshold value of enamel mineral solubility and dental erosion before and after consuming acidic soft drinks. Methods: Subjects of the research are saliva and enamel of 12 rabbits, which have some criteria such as age > 70 days, body weight > 600 grams, and teeth considered to be healthy. The sample devided equally into 4 groups. Each of those marmooths was given a drink as much as 2.5 cc/consumption (there are 1, 2 and 3× per day by using syringe without injection needle. Salivary minerals then were examined by using atomic absorption spectrophotometric (ASS, while dental erosion was examined using scanning electron microscop (SEM. The data were analyzed by using Paired t-test. Results: It is known that the threshold value of enamel mineral solubility (K, Na, Fe, Mg, Cl, P, Ca, F, C has significant difference (p < 0.05 after being exposed to folic acid. Meanwhile, Fe did not have significant difference (p = 0.090 after being exposed to citric acid. Similarly, C did not have significant difference (p = 0.063 after being exposed to bicarbonate acid. Furthermore, it is also known that the threshold time value of dental erosion are on the 105th day for folic acid, on the 111th day for citric acid, and on the 117th day for bicarbonate acid. Conclusion: Threshold value of enamel mineral solubility before and after consuming soft drinks containing acid is different. Based on the threshold value of dental erosion, it is known that folic acid is the most erosive acid.Latar belakang: Erosi gigi bersifat irreversible

Food Sustainable Model Development: An ANP Approach to Prioritize Sustainable Factors in the Romanian Natural Soft Drinks Industry Context

Directory of Open Access Journals (Sweden)

Răzvan Cătalin Dobrea

2015-07-01

Full Text Available The latest developments in natural soft drinks in the Romanian market signal significant changes in consumers’ perceptions of the sustainability concept. While the necessity of preserving natural resources and ensuring a decent level of healthiness seem to be steadily embraced by the Romanian society, the lack of long enough time series to acknowledge this shift render impossible a traditional econometric validation of these recent trends in economic thinking. The large number of European-funded projects for upgrading technology in the Romanian sector of natural soft drinks raises the question whether the learning by doing effect dispersed into the Romanian managers’ investment decision making from the perspective of both economic and food sustainability. This paper presents the construction and the evaluation of an Analytical Network Process (ANP market share model, which emerged from extended in-depth interviews with 10 managers of the main Romanian natural soft drinks producers. This model differs from traditional market share ANP ones since concepts like either food of economic sustainability were considered as significant driving factors. The coincidence between the estimated market share and the actual one, expressed by Saaty’s compatibility index, validate this model and offer comparative numerical weights’ of importance for food or economic sustainability.

Differential hypothalamic leptin sensitivity in obese rat offspring exposed to maternal and postnatal intake of chocolate and soft drink.

Science.gov (United States)

Kjaergaard, M; Nilsson, C; Secher, A; Kildegaard, J; Skovgaard, T; Nielsen, M O; Grove, K; Raun, K

2017-01-16

Intake of high-energy foods and maternal nutrient overload increases the risk of metabolic diseases in the progeny such as obesity and diabetes. We hypothesized that maternal and postnatal intake of chocolate and soft drink will affect leptin sensitivity and hypothalamic astrocyte morphology in adult rat offspring. Pregnant Sprague-Dawley rats were fed ad libitum chow diet only (C) or with chocolate and high sucrose soft drink supplement (S). At birth, litter size was adjusted into 10 male offspring per mother. After weaning, offspring from both dietary groups were assigned to either S or C diet, giving four groups until the end of the experiment at 26 weeks of age. As expected, adult offspring fed the S diet post weaning became obese (body weight: Peffect of leptin than energy expenditure, suggesting differential programming of leptin sensitivity in ARC in SS offspring. Effects of the maternal S diet were normalized when offspring were fed a chow diet after weaning. Maternal intake of chocolate and soft drink had long-term consequences for the metabolic phenotype in the offspring if they continued on the S diet in postnatal life. These offspring displayed obesity despite lowered energy intake associated with alterations in hypothalamic leptin signalling.

The Effect of Two Soft Drinks on Bracket Bond Strength and on Intact and Sealed Enamel: An In Vitro Study

OpenAIRE

Pasha, Azam; Sindhu, D; Nayak, Rabindra S; Mamatha, J; Chaitra, K R; Vishwakarma, Swati

2015-01-01

Background and Objectives: This study was conducted to evaluate the effect of two soft drinks, Coca-Cola and Mirinda orange on bracket bond strength, on adhesive remnant on teeth after debonding the bracket, and to observe by means of scanning electron microscope (SEM) the effect of these drinks on intact and sealed enamel. Methods: 120 non-carious maxillary premolar teeth already extracted for Orthodontic purposes were taken and divided into three groups, i.e., Coca-Cola drink, Mirinda orang...

Soft drinks, sweets, and sugar - tracking and lifestyle: The Oslo Youth Study

OpenAIRE

Nymoen, Lena Lie

2008-01-01

Background: Sugar intake has increased substantially in most parts of the world over the past 50 years. Soft drinks seem to be the largest contributor to this increase. A high intake of sugar is correlated with tooth decay, and has been linked to the risk of becoming overweight, developing diabetes type 2 and other lifestyle diseases. One part of the prevention strategy for these diseases may therefore be to promote a reduced intake of foods and beverages high in sugar. To be able to design a...

How can we restrict the sale of sports and energy drinks to children? A proposal for a World Health Organization-sponsored framework convention to restrict the sale of sports and energy drinks.

Science.gov (United States)

Jean, G

2017-12-01

High-sugar drinks, including fruit drinks, soft drinks, sports drinks and energy drinks, are of no nutritional value and contribute to the burden of dental disease in all age groups. The manufacturers of sports and energy drinks have elected to target children in their marketing campaigns and promote a misleading association between their products, healthy lifestyles and sporting prowess. The World Health Organization (WHO) has acknowledged that strategies aimed at prevention of dental disease are the only economically viable options for managing the oral health of children in low- and middle-income countries. Developed nations will also be advantaged by preventive programmes given that the cost of providing dental care to those who cannot pay draws valuable resources away from more pressing health issues. The Convention on the Rights of the Child (CRC) obligates governments to develop legislation to protect the health of children. A framework convention modelled on the existing Framework Convention for Tobacco Control, supported by the WHO, would assist governments to proactively legislate to restrict the sale of sports and energy drinks to children. This article will consider how a framework convention would be an advantage with reference to the strategies used by sports and energy drink manufacturers in Australia. © 2017 Australian Dental Association.

Consumption of sucrose-sweetened soft drinks increases plasma levels of uric acid in overweight and obese subjects

DEFF Research Database (Denmark)

Bruun, J M; Maersk, M; Belza, Anita

2015-01-01

BACKGROUND/OBJECTIVES: Sucrose-sweetened soft drinks (SSSDs) are associated with the development of metabolic disorders. Fructose is a major component of SSSDs and is demonstrated to induce uric acid (UA) production and stimulate fat accumulation independent of excess caloric intake. UA induce...

Cola soft drinks for evaluating the bioaccessibility of uranium in contaminated mine soils

International Nuclear Information System (INIS)

Lottermoser, Bernd G.; Schnug, Ewald; Haneklaus, Silvia

2011-01-01

There is a rising need for scientifically sound and quantitative as well as simple, rapid, cheap and readily available soil testing procedures. The purpose of this study was to explore selected soft drinks (Coca-Cola Classic (registered) , Diet Coke (registered) , Coke Zero (registered) ) as indicators of bioaccessible uranium and other trace elements (As, Ce, Cu, La, Mn, Ni, Pb, Th, Y, Zn) in contaminated soils of the Mary Kathleen uranium mine site, Australia. Data of single extraction tests using Coca-Cola Classic (registered) , Diet Coke (registered) and Coke Zero (registered) demonstrate that extractable arsenic, copper, lanthanum, manganese, nickel, yttrium and zinc concentrations correlate significantly with DTPA- and CaCl 2 -extractable metals. Moreover, the correlation between DTPA-extractable uranium and that extracted using Coca-Cola Classic (registered) is close to unity (+ 0.98), with reduced correlations for Diet Coke (registered) (+ 0.66) and Coke Zero (registered) (+ 0.55). Also, Coca-Cola Classic (registered) extracts uranium concentrations near identical to DTPA, whereas distinctly higher uranium fractions were extracted using Diet Coke (registered) and Coke Zero (registered) . Results of this study demonstrate that the use of Coca-Cola Classic (registered) in single extraction tests provided an excellent indication of bioaccessible uranium in the analysed soils and of uranium uptake into leaves and stems of the Sodom apple (Calotropis procera). Moreover, the unconventional reagent is superior in terms of availability, costs, preparation and disposal compared to traditional chemicals. Contaminated site assessments and rehabilitation of uranium mine sites require a solid understanding of the chemical speciation of environmentally significant elements for estimating their translocation in soils and plant uptake. Therefore, Cola soft drinks have potential applications in single extraction tests of uranium contaminated soils and may be used for

Cola soft drinks for evaluating the bioaccessibility of uranium in contaminated mine soils

Energy Technology Data Exchange (ETDEWEB)

Lottermoser, Bernd G., E-mail: Bernd.Lottermoser@utas.edu.au [School of Earth Sciences, University of Tasmania, Private Bag 79, Hobart, Tasmania 7001 (Australia); Schnug, Ewald; Haneklaus, Silvia [Institute for Crop and Soil Science, Federal Institute for Cultivated Plants, Julius Kuehn-Institute (JKI), Bundesallee 50, D-38116 Braunschweig (Germany)

2011-08-15

There is a rising need for scientifically sound and quantitative as well as simple, rapid, cheap and readily available soil testing procedures. The purpose of this study was to explore selected soft drinks (Coca-Cola Classic (registered) , Diet Coke (registered) , Coke Zero (registered) ) as indicators of bioaccessible uranium and other trace elements (As, Ce, Cu, La, Mn, Ni, Pb, Th, Y, Zn) in contaminated soils of the Mary Kathleen uranium mine site, Australia. Data of single extraction tests using Coca-Cola Classic (registered) , Diet Coke (registered) and Coke Zero (registered) demonstrate that extractable arsenic, copper, lanthanum, manganese, nickel, yttrium and zinc concentrations correlate significantly with DTPA- and CaCl{sub 2}-extractable metals. Moreover, the correlation between DTPA-extractable uranium and that extracted using Coca-Cola Classic (registered) is close to unity (+ 0.98), with reduced correlations for Diet Coke (registered) (+ 0.66) and Coke Zero (registered) (+ 0.55). Also, Coca-Cola Classic (registered) extracts uranium concentrations near identical to DTPA, whereas distinctly higher uranium fractions were extracted using Diet Coke (registered) and Coke Zero (registered) . Results of this study demonstrate that the use of Coca-Cola Classic (registered) in single extraction tests provided an excellent indication of bioaccessible uranium in the analysed soils and of uranium uptake into leaves and stems of the Sodom apple (Calotropis procera). Moreover, the unconventional reagent is superior in terms of availability, costs, preparation and disposal compared to traditional chemicals. Contaminated site assessments and rehabilitation of uranium mine sites require a solid understanding of the chemical speciation of environmentally significant elements for estimating their translocation in soils and plant uptake. Therefore, Cola soft drinks have potential applications in single extraction tests of uranium contaminated soils and may be used for

Portion Size Labeling and Intended Soft Drink Consumption: The Impact of Labeling Format and Size Portfolio

Science.gov (United States)

Vermeer, Willemijn M.; Steenhuis, Ingrid H. M.; Leeuwis, Franca H.; Bos, Arjan E. R.; de Boer, Michiel; Seidell, Jacob C.

2010-01-01

Objective: To assess what portion size labeling "format" is most promising in helping consumers selecting appropriate soft drink sizes, and whether labeling impact depends on the size portfolio. Methods: An experimental study was conducted in fast-food restaurants in which 2 labeling formats (ie, reference portion size and small/medium/large…

Substitution between Online and Offline Advertising: Evidence from the Carbonated Soft Drink Industry

OpenAIRE

He, Xi; Lopez, Rigoberto A.; Liu, Yizao

2015-01-01

As in previous studies on traditional media, previous work has assumed that online and offline advertising are substitutes. However, empirical evidence for this premise is lacking. This paper investigates the substitution between online advertising and offline advertising as well as the impact of the introduction of new media technology on the cost of advertising. Using a rich dataset of monthly observations for 52 carbonated soft drink brands between 2005 and 2011, we estimate a translog cos...

Water Consumption in European Children : Associations with Intake of Fruit Juices, Soft Drinks and Related Parenting Practices

NARCIS (Netherlands)

Mantziki, Krystallia; Renders, Carry M; Seidell, Jaap C

2017-01-01

Background: High intake of fruit juices and soft drinks contributes to excessive weight gain and obesity in children. Furthermore, parenting practices play an important role in the development of children's dietary habits. The way parents play this role in the development of their children's choices

Screen-based sedentary time: Association with soft drink consumption and the moderating effect of parental education in European children : The ENERGY study

NARCIS (Netherlands)

Gebremariam, M.K.; Chinapaw, M.J.; Bringolf-Isler, B.; Bere, E.; Kovacs, E.; Verloigne, M.; Stok, F.M.; Manios, Y.; Brug, J.; Lien, N.

2017-01-01

Aim The aim of the present study was to explore if children who spend more time on screen-based sedentary behaviors (i.e.TV viewing and computer use) drink more sugar-sweetened soft drinks. The study also assessed whether these associations were independent of individual and home environmental

Effects of Soft Drinks on Resting State EEG and Brain-Computer Interface Performance.

Science.gov (United States)

Meng, Jianjun; Mundahl, John; Streitz, Taylor; Maile, Kaitlin; Gulachek, Nicholas; He, Jeffrey; He, Bin

2017-01-01

Motor imagery-based (MI based) brain-computer interface (BCI) using electroencephalography (EEG) allows users to directly control a computer or external device by modulating and decoding the brain waves. A variety of factors could potentially affect the performance of BCI such as the health status of subjects or the environment. In this study, we investigated the effects of soft drinks and regular coffee on EEG signals under resting state and on the performance of MI based BCI. Twenty-six healthy human subjects participated in three or four BCI sessions with a resting period in each session. During each session, the subjects drank an unlabeled soft drink with either sugar (Caffeine Free Coca-Cola), caffeine (Diet Coke), neither ingredient (Caffeine Free Diet Coke), or a regular coffee if there was a fourth session. The resting state spectral power in each condition was compared; the analysis showed that power in alpha and beta band after caffeine consumption were decreased substantially compared to control and sugar condition. Although the attenuation of powers in the frequency range used for the online BCI control signal was shown, group averaged BCI online performance after consuming caffeine was similar to those of other conditions. This work, for the first time, shows the effect of caffeine, sugar intake on the online BCI performance and resting state brain signal.

Methodology for designing and manufacturing complex biologically inspired soft robotic fluidic actuators: prosthetic hand case study.

Science.gov (United States)

Thompson-Bean, E; Das, R; McDaid, A

2016-10-31

We present a novel methodology for the design and manufacture of complex biologically inspired soft robotic fluidic actuators. The methodology is applied to the design and manufacture of a prosthetic for the hand. Real human hands are scanned to produce a 3D model of a finger, and pneumatic networks are implemented within it to produce a biomimetic bending motion. The finger is then partitioned into material sections, and a genetic algorithm based optimization, using finite element analysis, is employed to discover the optimal material for each section. This is based on two biomimetic performance criteria. Two sets of optimizations using two material sets are performed. Promising optimized material arrangements are fabricated using two techniques to validate the optimization routine, and the fabricated and simulated results are compared. We find that the optimization is successful in producing biomimetic soft robotic fingers and that fabrication of the fingers is possible. Limitations and paths for development are discussed. This methodology can be applied for other fluidic soft robotic devices.

View the label before you view the movie: A field experiment into the impact of Portion size and Guideline Daily Amounts labelling on soft drinks in cinemas

Directory of Open Access Journals (Sweden)

de Boer Michiel

2011-06-01

Full Text Available Abstract Background Large soft drink sizes increase consumption, and thereby contribute to obesity. Portion size labelling may help consumers to select more appropriate food portions. This study aimed to assess the effectiveness of portion size and caloric Guidelines for Daily Amounts (GDA labelling on consumers' portion size choices and consumption of regular soft drinks. Methods A field experiment that took place on two subsequent evenings in a Dutch cinema. Participants (n = 101 were asked to select one of five different portion sizes of a soft drink. Consumers were provided with either portion size and caloric GDA labelling (experimental condition or with millilitre information (control condition. Results Labelling neither stimulated participants to choose small portion sizes (OR = .75, p = .61, CI: .25 - 2.25, nor did labelling dissuade participants to choose large portion sizes (OR = .51, p = .36, CI: .12 - 2.15. Conclusions Portion size and caloric GDA labelling were found to have no effect on soft drink intake. Further research among a larger group of participants combined with pricing strategies is required. The results of this study are relevant for the current public health debate on food labelling.

Skipping breakfast, overconsumption of soft drinks and screen media: longitudinal analysis of the combined influence on weight development in primary schoolchildren.

Science.gov (United States)

Traub, Meike; Lauer, Romy; Kesztyüs, Tibor; Wartha, Olivia; Steinacker, Jürgen Michael; Kesztyüs, Dorothea

2018-03-16

Regular breakfast and well-balanced soft drink, and screen media consumption are associated with a lower risk of overweight and obesity in schoolchildren. The aim of this research is the combined examination of these three parameters as influencing factors for longitudinal weight development in schoolchildren in order to adapt targeted preventive measures. In the course of the Baden-Württemberg Study, Germany, data from direct measurements (baseline (2010) and follow-up (2011)) at schools was available for 1733 primary schoolchildren aged 7.08 ± 0.6 years (50.8% boys). Anthropometric measurements of the children were taken according to ISAK-standards (International Standard for Anthropometric Assessment) by trained staff. Health and lifestyle characteristics of the children and their parents were assessed in questionnaires. A linear mixed effects regression analysis was conducted to examine influences on changes in waist-to-height-ratio (WHtR), weight, and body mass index (BMI) measures. A generalised linear mixed effects regression analysis was performed to identify the relationship between breakfast, soft drink and screen media consumption with the prevalence of overweight, obesity and abdominal obesity at follow-up. According to the regression analyses, skipping breakfast led to increased changes in WHtR, weight and BMI measures. Skipping breakfast and the overconsumption of screen media at baseline led to higher odds of abdominal obesity and overweight at follow-up. No significant association between soft drink consumption and weight development was found. Targeted prevention for healthy weight status and development in primary schoolchildren should aim towards promoting balanced breakfast habits and a reduction in screen media consumption. Future research on soft drink consumption is needed. Health promoting interventions should synergistically involve children, parents, and schools. The Baden-Württemberg Study is registered at the German Clinical

[Energy drinks: an unknown risk].

Science.gov (United States)

Petit, Aymeric; Levy, Fanny; Lejoyeux, Michel; Reynaud, Michel; Karila, Laurent

2012-05-01

The term "energy drink" designates "any product in the form of a drink or concentrated liquid, which claims to contain a mixture of ingredients having the property to raise the level of energy and vivacity". The main brands, Red Bull, Dark Dog, Rockstar, Burn, and Monster, are present in food stores, sports venues, and bars among other soft drinks and fruit juices. Their introduction into the French market raised many reluctances, because of the presence of taurine, caffeine and glucuronolactone. These components present in high concentrations, could be responsible for adverse effects on health. The association of energy drinks and spirits is widely found among adolescents and adults who justify drinking these mixed drinks by their desire to drink more alcohol while delaying drunkenness. Given the importance of the number of incidents reported among the energy drinks consumers, it seemed appropriate to make a synthesis of available data and to establish causal links between the use of these products and the development of health complications. For a literature review, we selected scientific articles both in English and French published between 2001 and 2011 by consulting the databases Medline, Embase, PsycINFO and Google Scholar. The words used alone or in combination are "energy dinks", "caffeine", "taurine", "toxicity", "dependence". An occasional to a moderate consumption of these drinks seems to present little risk for healthy adults. However, excessive consumption associated with the use of alcohol or drugs in amounts that far exceed the manufacturers recommended amount, could be responsible for negative consequences on health, particularly among subjects with cardiovascular disease.

Carbonated soft drinks alter hepatic cytochrome P450 isoform expression in Wistar rats.

Science.gov (United States)

Alkhedaide, Adel; Soliman, Mohamed Mohamed; Ibrahim, Zein Shaban

2016-11-01

The aim of the current study was to examine the effects of chronic consumption of soft drinks (SDs) on hepatic oxidative stress and cytochrome P450 enzymes (CYPs) expression in the livers of Wistar rats. For 3 consecutive months, the rats had free access to three different soft drinks, Coca-Cola, Pepsi-Cola and 7-UP. The rats were subsequently compared with control group rats that had consumed water. Blood and hepatic tissue samples were assayed for the changes in antioxidants, liver function biomarkers and hepatic gene expression for different isoforms of hepatic CYP. The results indicated that SD consumption (SDC) decreased serum antioxidant levels and increased malondialdehyde secretion, and increased liver biomarkers (glutamate pyruvate transaminase and glutamate oxaloacetate). SD induced alterations in mRNA expression of hepatic antioxidants and cytochrome isoforms. The expression of peroxidase, catalase, CYP1A2, CYP3A2 and CYP2C11 in the liver were upregulated following SDC. By contrast, CYP2B1 was downregulated after 3 months of SDC in liver tissue samples. Thus, the present findings indicate that SDs induced oxidative stress in the liver of Wistar rats and for the first time, to the best of our knowledge, indicate that SDC disrupts hepatic CYP enzymes that may affect drug metabolism. Therefore, drug-dosing programs should be carefully designed to take these novel findings into consideration for the treatment of diseases.

Caries and dental erosion: are Soroti children and adolescents at risk from increased soft-drink availability in Uganda?

Science.gov (United States)

Cheng, Jordan; Campbell, Karen

2016-12-01

An initial field study to investigate dental caries and dental erosion in children and adolescents in the community of Soroti, Uganda. A stratified two-stage cluster sample of 84 children (ages 8-10) and adolescents (ages 16-19) were recruited. A survey was undertaken to assess the state of determinants of oral health, oral hygiene practices, and soft-drink and sweetened-tea consumption. Intra-oral photographs were taken and reviewed to measure Decayed, Missing, and Filled Teeth (DMFT) and dental erosion. A significant difference was observed in DMFT between children and adolescents (3.7 ± 2.7 versus 2.1 ± 2.4 p=.02). A trend of lower erosion scores was seen in children compared to adolescents. Greater frequency of sweetened-tea consumption over soft-drinks was noted in both groups. This study did not reveal any relationship between different levels of cariogenic beverage consumption and DMFT or dental erosion in this sample group.

Effects of fluoride and epigallocatechin gallate on soft-drink-induced dental erosion of enamel and root dentin

Directory of Open Access Journals (Sweden)

Yin-Lin Wang

2018-04-01

Full Text Available Background/Purpose: Fluoride and epigallocatechin gallate (EGCG have been proven to prevent dental caries. The purpose of this study was to evaluate the effects of fluoride and EGCG on soft-drink-induced dental erosion in vitro. Methods: Forty enamel and dentin specimens were prepared from extracted human teeth. The specimens were divided into 4 groups and treated separately with distilled water (as control, 0.5 M sodium fluoride (NF, 400 μM EGCG (EG, and a solution containing 0.5 M NaF and 400 μM EGCG (FG. Cyclic erosive treatment was performed according to the experimental procedures. The specimens were analyzed using laser scanning confocal microscopy, scanning electron microscopy, and a microhardness tester. The data were analyzed using ANOVA and Bonferroni's post hoc test. The significance level was set at 5%. Results: The amount of substance loss was lower in the NF and EG groups than in the control group (p < 0.05. The erosion-caused substance loss was more pronounced in the dentin than in the enamel specimens. Surface microhardness loss was lower in the NF and EG groups than in the control group (p < 0.05. The diameter of the dentinal tubule was wider in the control group than in the NF and EG groups (p < 0.05. No combined effects were observed in the FG group. Conclusion: Both fluoride and EGCG are effective in preventing soft-drink-induced erosion compared with the control group. Fluoride and EGCG may interfere with each other. The mechanisms of the anti-erosive effect need to be explored in the future. Keywords: Dental erosion, Fluoride, Epigallocatechin gallate, Soft drinks, Laser scanning confocal microscopy

Fast determination of seven synthetic pigments from wine and soft drinks using magnetic dispersive solid-phase extraction followed by liquid chromatography-tandem mass spectrometry.

Science.gov (United States)

Chen, Xiao-Hong; Zhao, Yong-Gang; Shen, Hao-Yu; Zhou, Li-Xin; Pan, Sheng-Dong; Jin, Mi-Cong

2014-06-13

A novel, simple and sensitive method based on the use of magnetic dispersive solid-phase extraction (M-dSPE) procedure combined with ultra-fast liquid chromatography-tandem quadrupole mass spectrometry (UFLC-MS/MS) was developed to determine seven synthetic pigments (tartrazine, amaranth, carmine, sunset yellow, allura red, brilliant blue and erythrosine) in wines and soft drinks. An amino-functionalized low degrees of cross-linking magnetic polymer (NH2-LDC-MP) was synthesized via suspension polymerization, and characterized by transmission electron microscopy (TEM). The NH2-LDC-MP was used as the M-dSPE sorbent to remove the matrix from the solution, and the main factors affecting the extraction were investigated in detail. The obtained results demonstrated the higher extraction capacity of NH2-LDC-MP with recoveries between 84.0 and 116.2%. The limits of quantification (LOQs) for the seven synthetic pigments were between 1.51 and 5.0μg/L in wines and soft drinks. The developed M-dSPE UFLC-MS/MS method had been successfully applied to the real wines and soft drinks for food-safety risk monitoring in Zhejiang Province, China. The results showed that sunset yellow was in three out of thirty soft drink samples (2.95-42.6μg/L), and erythrosine in one out of fifteen dry red wine samples (3.22μg/L), respectively. It was confirmed that the NH2-LDC-MP was a kind of highly effective M-dSPE materials for the pigments analyses. Copyright © 2014 Elsevier B.V. All rights reserved.

Temporal changes in sugar-sweetened soft drink intake and variation across municipalities in the Capital Region of Denmark

DEFF Research Database (Denmark)

Bernsdorf, Kamille Almer; Lau, Cathrine Juel; Robinson, Kirstine Magtengaard

2016-01-01

We aimed to examine the changes in sugar-sweetened soft drink intake across the Capital Region of Denmark from 2007 to 2013 and to examine the association between intake and neighbourhood socioeconomic status. The study included data from three health surveys in 2007 (n = 30,426), 2010 (n = 42...

Associations between home- and family-related factors and fruit juice and soft drink intake among 10- to 12-year old children. The ENERGY project

NARCIS (Netherlands)

Van Lippevelde, W.; te Velde, S.J.; Verloigne, M.; de Bourdeaudhuij, I.; Manios, Y.; Bere, E.; Jan, N.; Fernandez Alvira, J.M.; Chinapaw, M.J.M.; Bringolf-Isler, B.; Kovacs, E.; Brug, J.; Maes, L.

2013-01-01

The aim of this study is to investigate associations of family-related factors with children's fruit drink/juice and soft drink consumption. A cross-sectional survey among 10- to 12-year-old children and their parents in eight European countries was conducted to gather this data. Key variables of

Roughness and pH changes of enamel surface induced by soft drinks in vitro-applications of stylus profilometry, focus variation 3D scanning microscopy and micro pH sensor.

Science.gov (United States)

Fujii, Mie; Kitasako, Yuichi; Sadr, Alireza; Tagami, Junji

2011-01-01

This study aimed to evaluate enamel surface roughness (Ra) and pH before and after erosion by soft drinks. Enamel was exposed to a soft drink (cola, orange juice or green tea) for 1, 5 or 60 min; Ra was measured using contact-stylus surface profilometry (SSP) and non-contact focus variation 3D microscope (FVM). Surface pH was measured using a micro pH sensor. Data were analyzed at significance level of alpha=0.05. There was a significant correlation in Ra between SSP and FVM. FVM images showed no changes in the surface morphology after various periods of exposure to green tea. Unlike cola and orange juice, exposure to green tea did not significantly affect Ra or pH. A significant correlation was observed between surface pH and Ra change after exposure to the drinks. Optical surface analysis and micro pH sensor may be useful tools for non-damaging, quantitative assessment of soft drinks erosion on enamel.

Determination of gardenia yellow colorants in soft drink, pastry, instant noodles with ultrasound-assisted extraction by high performance liquid chromatography-electrospray ionization tandem mass spectrum.

Science.gov (United States)

Zhou, Wei-E; Zhang, Yuan; Li, Yang; Ling, Yun; Li, Hong-Na; Li, Shao-Hui; Jiang, Shou-Jun; Ren, Zhi-Qin; Huang, Zhi-Qiang; Zhang, Feng

2016-05-13

A novel, rapid and simple analytical method was developed for the quantitative determination of crocin, crocetin and geniposide in soft drink, pastry and instant noodles. The solid samples were relatively homogenized into powders and fragments. The gardenia yellow colorants were successively extracted with methanol using ultrasound-assisted extraction. The analytes were quantitatively measured in the extracts by liquid chromatography coupled with electrospray ionization tandem mass spectrometry. High correlation coefficients (r(2)>0.995) of crocin, crocetin and geniposide were obtained within their linear ranges respectively (50-1000ng/mL, 50-1000ng/mL, 15-240ng/mL) by external standard method. The limits of detection (LODs) were 0.02μg/g for crocin, 0.01μg/g for crocetin and 0.002μg/g for geniposide. And the limits of quantitation (LOQs) were in the ranges of 0.05-0.45μg/g for crocin, and in the ranges of 0.042-0.32μg/g for crocetin, and in the ranges of 0.02-0.15μg/g for geniposide in soft drink, pastry and instant noodles samples. The average recoveries of crocin, crocetin and geniposide ranged from 81.3% to 117.6% in soft drink, pastry and instant noodles. The intra- and inter-day precisions were respectively in the range of 1.3-4.8% and 1.7-11.8% in soft drink, pastry and instant noodle. The developed methods were successfully validated and applied to the soft drink, pastry, and instant noodles collected from the located market in Beijing from China. Crocin, crocetin and geniposide were detected in the collected samples. The average concentrations ranged from 0.84 to 4.20mg/g for crocin, and from 0.62 to 3.11mg/g for crocetin, and from 0.18 to 0.79mg/g for gardenia in various food samples. The method can provide evidences for government to determine gardenia yellow pigments and geniposide in food. Copyright © 2016 Elsevier B.V. All rights reserved.

Long-term soft drink and aspartame intake induces hepatic damage via dysregulation of adipocytokines and alteration of the lipid profile and antioxidant status.

Science.gov (United States)

Lebda, Mohamed A; Tohamy, Hossam G; El-Sayed, Yasser S

2017-05-01

Dietary intake of fructose corn syrup in sweetened beverages is associated with the development of metabolic syndrome and obesity. We hypothesized that inflammatory cytokines play a role in lipid storage and induction of liver injury. Therefore, this study intended to explore the expression of adipocytokines and its link to hepatic damage. Rats were assigned to drink water, cola soft drink (free access) and aspartame (240 mg/kg body weight/day orally) for 2 months. The lipid profiles, liver antioxidants and pathology, and mRNA expression of adipogenic cytokines were evaluated. Subchronic intake of soft drink or aspartame substantially induced hyperglycemia and hypertriacylglycerolemia, as represented by increased serum glucose, triacylglycerol, low-density lipoprotein and very low-density lipoprotein cholesterol, with obvious visceral fatty deposition. These metabolic syndromes were associated with the up-regulation of leptin and down-regulation of adiponectin and peroxisome proliferator activated receptor-γ (PPAR-γ) expression. Moreover, alterations in serum transaminases accompanied by hepatic oxidative stress involving induction of malondialdehyde and reduction of superoxide dismutase, catalase, and glutathione peroxidase and glutathione levels are indicative of oxidative hepatic damage. Several cytoarchitecture alterations were detected in the liver, including degeneration, infiltration, necrosis, and fibrosis, predominantly with aspartame. These data suggest that long-term intake of soft drink or aspartame-induced hepatic damage may be mediated by the induction of hyperglycemia, lipid accumulation, and oxidative stress with the involvement of adipocytokines. Copyright © 2017 Elsevier Inc. All rights reserved.

The Impact of Social Media on Consumer Demand: The Case of Carbonated Soft Drink Market

OpenAIRE

Liu, Yizao; Lopez, Rigoberto A.

2013-01-01

This article estimates the impact of social media exposure on consumer valuation of product characteristics. We apply the Berry, Levinsohn and Pakes (1995) model of market equilibrium to sales data for 18 carbonated soft drink brands sold in 12 cities over 17 months (June 2011 to October 2012) and social media conversations on Facebook, Twitter and YouTube. Empirical results show that social media exposure is a significant driver of consumer behavior through altering evaluation of product cha...

Pilot Control of Viscous Bulking in the Activated Sludge Treatment of Industrial Effluent from Soft Drink Plants

Directory of Open Access Journals (Sweden)

Mohammad Mehdi Esfahani

2007-06-01

Full Text Available Viscous bulking is a typical problem arising in activated sludge facilities treating effluent from soft drink plants. The drawbacks associated with this phenomenon include increased effluent organic loading and undesirable sludge settlement. In order to investigate this phenomenon, a soft drink factory was selected as a pilot plant for a case study (where metal tanks were used as a biological selector, an aeration basin, and a clarifier. The study shows that the major causes of viscous bulking are high organic loading and undesirable ratio of monovalent to divalent cations. In the biological selector (with a retention time of 20 hours, while the organic load in the influent to the aeration basin decreased by about 50%, with an impact on reduced viscous bulking, pH value decreased from 12 to 6.5 due to fatty acids production. Adjustment of Na/Ca ratio improved bacterial surface hydrophobicity and prevented degradation of biological flocs. This resulted in improved sludge settleability. Application of this method improved sludge settling, made flocs stronger, and reduced effluent organic load (COD to less than 150 mg/l, indicating stability of the system.

Design and manufacture of multi-electrode ion chamber for absolute photon-flux measurements of soft x-rays

International Nuclear Information System (INIS)

Yoshigoe, Akitaka; Teraoka, Yuden

2001-03-01

In order to measure the absolute photon-flux of soft x-rays at the photon energy region from 500 eV to 1500 eV, a sealed gas ion chamber with multi-electrodes was designed and manufactured. Actually we succeeded in measuring the photon-flux at the soft x-ray beamline, BL23SU, in the SPring-8. This report concretely describes the design and the adjustment of the sealed gas ion chamber with multi-electrodes. (author)

Intake of Sweets, Snacks and Soft Drinks Predicts Weight Gain in Obese Pregnant Women: Detailed Analysis of the Results of a Randomised Controlled Trial.

Science.gov (United States)

Renault, Kristina M; Carlsen, Emma M; Nørgaard, Kirsten; Nilas, Lisbeth; Pryds, Ole; Secher, Niels J; Olsen, Sjurdur F; Halldorsson, Thorhallur I

2015-01-01

Lifestyle interventions targeting obese pregnant women often result in modest reduction in gestational weight gain, pregnancy complications and related risk factors. Examining adherence to the intervention can, however, provide valuable information on the importance of the different factors targeted. To evaluate improvements and relevance of different dietary factors targeted with respect to gestational weight gain in a 3-arm Randomised Controlled Trial (n=342) among obese pregnant women with BMI≥30 kg/m2. Randomisation 1:1:1 to either hypocaloric Mediterranean type of diet and physical activity intervention (D+PA); physical activity intervention alone (PA); or control (C). Diet was assessed at baseline (weeks 11-14) and endpoint (weeks 36-37) using a validated food frequency questionnaire. During the intervention women in the D+PA group significantly lowered their intakes of added sugars and saturated fat and increased their protein intake by ~1% of total energy compared to controls. Of these dietary variables only intakes of added sugar appeared to be related to GWG, while no association was observed for saturated fat or protein. Further analyses revealed that foods that contributed to intake of added sugars, including sweets, snacks, cakes, and soft drinks were strongly associated with weight gain, with women consuming sweets ≥2/day having 5.4 kg (95% CI 2.1-8.7) greater weight gain than those with a low (<1wk) intake. The results for soft drinks were more conflicting, as women with high weight gain tended to favour artificially sweetened soft drinks. In our sample of obese pregnant women, craving for sweets, snacks, and soft drinks strongly predicts GWG. Emphasis on reducing intakes of these foods may be more relevant for limiting gestational weight gain than encouraging strict compliance to more specific diets. ClinicalTrials.gov NCT01345149.

Intake of Sweets, Snacks and Soft Drinks Predicts Weight Gain in Obese Pregnant Women: Detailed Analysis of the Results of a Randomised Controlled Trial.

Directory of Open Access Journals (Sweden)

Kristina M Renault

Full Text Available Lifestyle interventions targeting obese pregnant women often result in modest reduction in gestational weight gain, pregnancy complications and related risk factors. Examining adherence to the intervention can, however, provide valuable information on the importance of the different factors targeted.To evaluate improvements and relevance of different dietary factors targeted with respect to gestational weight gain in a 3-arm Randomised Controlled Trial (n=342 among obese pregnant women with BMI≥30 kg/m2.Randomisation 1:1:1 to either hypocaloric Mediterranean type of diet and physical activity intervention (D+PA; physical activity intervention alone (PA; or control (C. Diet was assessed at baseline (weeks 11-14 and endpoint (weeks 36-37 using a validated food frequency questionnaire.During the intervention women in the D+PA group significantly lowered their intakes of added sugars and saturated fat and increased their protein intake by ~1% of total energy compared to controls. Of these dietary variables only intakes of added sugar appeared to be related to GWG, while no association was observed for saturated fat or protein. Further analyses revealed that foods that contributed to intake of added sugars, including sweets, snacks, cakes, and soft drinks were strongly associated with weight gain, with women consuming sweets ≥2/day having 5.4 kg (95% CI 2.1-8.7 greater weight gain than those with a low (<1wk intake. The results for soft drinks were more conflicting, as women with high weight gain tended to favour artificially sweetened soft drinks.In our sample of obese pregnant women, craving for sweets, snacks, and soft drinks strongly predicts GWG. Emphasis on reducing intakes of these foods may be more relevant for limiting gestational weight gain than encouraging strict compliance to more specific diets.ClinicalTrials.gov NCT01345149.

Quantitative bacterial examination and chemical evaluation of Diet, Club, and Ice-cream Sodas, Soft Drinks

International Nuclear Information System (INIS)

Watoo, M.K.S.; Watoo, F.S.; Kazi, T.G.; Tirmizi, S.A.; Iqbal, J.

2005-01-01

Diet, club, and ice cream sodas are flavored soft drinks consumed throughout the world, especially in summer seasons. This study has been undertaken to monitor the bacterial and chemical contamination of these national and international branded drinks procured from local markets. The isolated coliforms and microbes were E. coli Salmonella spp, Klebsiella spp, Enterobacter spp, Shigella spp, and Bacillus cereus. Diet and club sodas were less contaminated with microorganisms than were ice-cream sodas. Fifteen trace and toxic elements were identified with an atomic absorption spectrophotometer following the improved ash digestion method. The values of Nickel (Ni), (0.15 mg/L), (Pb) (0.28mg/L), Cadmium (Cd) (0.13mg/L) and Aluminum (Al) (0.76 mg/L) were higher than the (WHO) recommended limits. The concentrations of (Na, Fe, Pb) and Chromium (Cr) were higher in club sodas than diet and ice-cream sodas and the concentrations of Calcium (Ca), (Mn) in ice-cream sodas were also higher than diet and club sodas. Overall, the ice-cream sodas did not conform to the (WHO) standards allowed for safe ingestion of micro- and macro-metals in various drinks. (author)

Pitting attack occurrences of score on aluminum alloy 5182 can-container in a carbonated soft-drink solution; Tansan inryosuichu ni okeru kan`yo aruminiumu gokin 5182 sukoa bu no koshoku hassei

Energy Technology Data Exchange (ETDEWEB)

Seri, O. [Muroran Inst. of Technology, Hokkaido (Japan); Kanazawa, T. [Muroran Inst. of Technology, Hokkaido (Japan). Graduate School

1997-03-15

The blowout accident of a carbonated soft-drink can stored in a warehouse during summer was reported. It was a cause due to the stress corrosion cracking of aluminium alloy 5182. Though this case occurred in America, it is necessary to grasp the cause and measures supposing the various corrosion occurring conditions, including the case of America, in Japan where it is required high quality control moreover hot and humid climate. When the refreshing drinking can, EOE, on the market immersed in a carbonated soft-drink solution, corrosion occurred from the score. Corrosion form was a pitting corrosion and 20 cans among the 30 cans blew out due to pitting within a week. In this study, in order to clarify the cause of blowouts of score on aluminium alloy 5182 EOE in a carbonated soft-drink solution at 38{plus_minus}2{degree}C, polarization measurements and metallurgical observation were carried out. As a result, it was found that the blowouts are caused by pitting of groove of the score. 3 refs., 12 figs., 1 tab.

Cola soft drinks for evaluating the bioaccessibility of uranium in contaminated mine soils.

Science.gov (United States)

Lottermoser, Bernd G; Schnug, Ewald; Haneklaus, Silvia

2011-08-15

There is a rising need for scientifically sound and quantitative as well as simple, rapid, cheap and readily available soil testing procedures. The purpose of this study was to explore selected soft drinks (Coca-Cola Classic®, Diet Coke®, Coke Zero®) as indicators of bioaccessible uranium and other trace elements (As, Ce, Cu, La, Mn, Ni, Pb, Th, Y, Zn) in contaminated soils of the Mary Kathleen uranium mine site, Australia. Data of single extraction tests using Coca-Cola Classic®, Diet Coke® and Coke Zero® demonstrate that extractable arsenic, copper, lanthanum, manganese, nickel, yttrium and zinc concentrations correlate significantly with DTPA- and CaCl₂-extractable metals. Moreover, the correlation between DTPA-extractable uranium and that extracted using Coca-Cola Classic® is close to unity (+0.98), with reduced correlations for Diet Coke® (+0.66) and Coke Zero® (+0.55). Also, Coca-Cola Classic® extracts uranium concentrations near identical to DTPA, whereas distinctly higher uranium fractions were extracted using Diet Coke® and Coke Zero®. Results of this study demonstrate that the use of Coca-Cola Classic® in single extraction tests provided an excellent indication of bioaccessible uranium in the analysed soils and of uranium uptake into leaves and stems of the Sodom apple (Calotropis procera). Moreover, the unconventional reagent is superior in terms of availability, costs, preparation and disposal compared to traditional chemicals. Contaminated site assessments and rehabilitation of uranium mine sites require a solid understanding of the chemical speciation of environmentally significant elements for estimating their translocation in soils and plant uptake. Therefore, Cola soft drinks have potential applications in single extraction tests of uranium contaminated soils and may be used for environmental impact assessments of uranium mine sites, nuclear fuel processing plants and waste storage and disposal facilities. Copyright © 2011 Elsevier

Exposure to Food Advertising On Television: Associations With Children's Fast Food and Soft Drink Consumption and Obesity

OpenAIRE

Tatiana Andreyeva; Inas Rashad Kelly; Jennifer L. Harris

2011-01-01

There is insufficient research on the direct effects of food advertising on children's diet and diet-related health, particularly in non-experimental settings. We employ a nationally-representative sample from the Early Childhood Longitudinal Survey-Kindergarten Cohort (ECLS-K) and the Nielsen Company data on spot television advertising of cereals, fast food restaurants and soft drinks to children across the top 55 designated-market areas to estimate the relation between exposure to food adve...

Healthy nutrition and health-washing corporate discourses across three organizations in the fast food and soft drinks industry

Directory of Open Access Journals (Sweden)

Mara Stan

2017-08-01

Full Text Available The study inquires about the means by which corporate discourse formulates, invokes and challenges scientific research by examining three case studies of organizations in the fast food and soft drinks industry. Critical discourse analysis carried out on corporate sections dedicated to healthy lifestyles reveals all three explored discursive streams acknowledge customers’ changing needs and consumption patterns. They introduce healthy lifestyles up on the corporate agenda, as cornerstone for their identity and governance strategy of fast-food and soft drinks producers. As overall discursive pattern, corporate public relations jargon constantly employs disclaimers and generic terms such as “evolution”, “development”, “strategy”, “partnership”, “transparency”, without providing specific assessment criteria to map down the intended intervention. The article provides rhetoric illustrations enacted through omission, disclaimers, backgrounding and reframing effects. The overriding discursive rationale implies that healthy diets are still low-priority for leading food and drinks producers. The documented companies indicate in their PR communication two strategies of fighting against the scientifically proven negative impact of their traded products: the individual choice paradigm and the social compensation strategy or health-washing. The article highlights some of the inconsistencies of discourses on healthy food that apparently are counter-intuitive enough to undermine corporate interests, while such discourses peddle on the idea of sincerity, transparency and ethical conduct. All three case studied corporations strive to safeguard their threatened reputation across discursive practices by acknowledging their weaknesses as sign of honesty. Further reflection on critical discourse analysts’ mandate and implications for practice are explored.

Brand patronage and loyalty patterns: Store vs. manufacturer brands in the Greek soft drink category

DEFF Research Database (Denmark)

Krystallis, Athanasios; Chrysochou, Polymeros; Fotopoulos, Christos

Nowadays, in most of the developed fast-moving consumer goods' markets store brands (i.e. retailer brands or private labels) have managed to establish a conciderable share in the retail market. Moreover, it is well known that store brands are perceived as strong competitors to manufacturer brands......, while offering good value for money. There is a large body of literature explaining and further exploring factors that influence loyalty towards store brands (e.g. among others Steenkamp and Dekimpe, 1997; Dhar and Hoch, 1997; Ailawadi and Keller, 2004). The objective of the work is to investigate...... the potential existence of differences in the loyalty behavior between store brands and manufacturer brands, as expressed through certain brand performance and loyalty measures (e.g. market shares, penetration, purchase frequencies, repeat rate, etc.). In order to meet the above escribed objective, panel data...

Avaliação do desenpenho logístico da cadeia brasileira de suprimentos de refrigerantes Evaluation of the logistic performance of Brazil's soft drink supply chain

Directory of Open Access Journals (Sweden)

Samuel Vieira Conceição

2004-12-01

Full Text Available Esse artigo tem como objetivo avaliar o desempenho logístico de quatro elos da cadeia brasileira de suprimentos de refrigerantes (fornecedores de embalagem para refrigerantes, indústria de refrigerantes, atacado e supermercado, adotando como metodologia o survey eletrônico. As repostas foram analisadas utilizando-se os testes estatísticos Mann-Whitney e Kruskal-Wallis, além de uma análise descritiva dos dados e da realização dos testes de hipótese. As empresas avaliaram o desempenho logístico da cadeia, por meio de indicadores da logística interna e externa, e identificaram a percentagem de uso desses indicadores. A taxa média de respostas foi de 40%. A pesquisa mostrou que os elos da cadeia de refrigerantes utilizam mais os indicadores de desempenho, que avaliam a logística interna, do que os que avaliam a logística externa.An evaluation was made of the logistics performance of four links in Brazil's soft drink supply chain (soft drink packaging suppliers, soft drink industry, wholesalers and supermarkets, based on an electronic survey of 54 companies, from which a 40% response rate was obtained. The answers were analyzed based on the supply chain management theory, using the Mann-Whitney and Kruskal-Wallis statistical tests and a descriptive analysis of the data. The surveyed companies evaluated the logistic performance of the chain based on indicators selected from a literature review, and identified the percentage of use of these indicators. It was found that the links in the soft drink chain preferentially use internal logistics performance indicators more than external logistics indicators.

The Oslo Health Study: A Dietary Index Estimating Frequent Intake of Soft Drinks and Rare Intake of Fruit and Vegetables Is Negatively Associated with Bone Mineral Density

Science.gov (United States)

Høstmark, Arne Torbjørn; Søgaard, Anne Johanne; Alvær, Kari; Meyer, Haakon E.

2011-01-01

Background. Since nutritional factors may affect bone mineral density (BMD), we have investigated whether BMD is associated with an index estimating the intake of soft drinks, fruits, and vegetables. Methods. BMD was measured in distal forearm in a subsample of the population-based Oslo Health Study. 2126 subjects had both valid BMD measurements and answered all the questions required for calculating a Dietary Index = the sum of intake estimates of colas and non-cola beverages divided by the sum of intake estimates of fruits and vegetables. We did linear regression analyses to study whether the Dietary Index and the single food items included in the index were associated with BMD. Results. There was a consistent negative association between the Dietary Index and forearm BMD. Among the single index components, colas and non-cola soft drinks were negatively associated with BMD. The negative association between the Dietary Index and BMD prevailed after adjusting for gender, age, and body mass index, length of education, smoking, alcohol intake, and physical activity. Conclusion. An index reflecting frequent intake of soft drinks and rare intake of fruit and vegetables was inversely related to distal forearm bone mineral density. PMID:21772969

Vertical Integration and Common Agency : An Empirical Analysis of the U.S. Carbonated Soft Drink Industry

OpenAIRE

Adachi, Takanori

2017-01-01

By using the unique feature of the U.S. carbonated soft drink industry, I find that PepsiCo's 2010 vertical merger lowered its retail prices by 4.4%. More importantly, these price effects are stronger in the markets with Coca-Cola's common agency than in the markets with PepsiCo's common agency: I find a price reduction of 2.5% for the markets where neither Coca-Cola's nor PepsiCo's bottler is a common agent for Dr Pepper. PepsiCo's prices are additionally lowered by 2.3-2.5% if Coca-Cola’s b...

Children and young people's perceptions of energy drinks: A qualitative study.

Science.gov (United States)

Visram, Shelina; Crossley, Stephen J; Cheetham, Mandy; Lake, Amelia

2017-01-01

Consumption of soft drinks is declining in many countries, yet energy drink sales continue to increase, particularly amongst young consumers. Little is currently known about the drivers behind these trends. Energy drinks are high in sugar and caffeine, and evidence indicates that regular or heavy use by under 18s is likely to be detrimental to health. This study aimed to explore children and young people's attitudes and perceptions in relation to energy drinks in a UK context. Eight focus groups were conducted with pupils aged 10-11 years (n = 20) and 13-14 years (n = 17) from four schools in northern England. A sub-sample also took part in a mapping exercise to generate further insights. Data were analysed using the constant comparative approach. Energy drinks were reportedly consumed in a variety of public and private places, generally linked to social activities, sports and computer gaming (particularly amongst boys). Participants demonstrated strong brand awareness and preferences that were linked to taste and perceived value for money. The relatively low price of energy drinks and their widespread availability were identified as key factors, along with gendered branding and marketing. Some participants demonstrated a critical approach to manufacturers' claims and many were keen to become better informed, often through school- or peer-based interventions. Other potential interventions included age restrictions, voluntary schemes involving retailers and improved labelling. The lack of a single dominant factor in participants' consumption choices suggests that there is unlikely to be a 'silver bullet' in attempting to address this issue. However, the findings provide support for policy-level interventions that seek to change the behaviours of manufacturers and retailers as well as consumers, and actively involve children and young people where possible.

Children and young people's perceptions of energy drinks: A qualitative study.

Directory of Open Access Journals (Sweden)

Shelina Visram

Full Text Available Consumption of soft drinks is declining in many countries, yet energy drink sales continue to increase, particularly amongst young consumers. Little is currently known about the drivers behind these trends. Energy drinks are high in sugar and caffeine, and evidence indicates that regular or heavy use by under 18s is likely to be detrimental to health. This study aimed to explore children and young people's attitudes and perceptions in relation to energy drinks in a UK context.Eight focus groups were conducted with pupils aged 10-11 years (n = 20 and 13-14 years (n = 17 from four schools in northern England. A sub-sample also took part in a mapping exercise to generate further insights. Data were analysed using the constant comparative approach.Energy drinks were reportedly consumed in a variety of public and private places, generally linked to social activities, sports and computer gaming (particularly amongst boys. Participants demonstrated strong brand awareness and preferences that were linked to taste and perceived value for money. The relatively low price of energy drinks and their widespread availability were identified as key factors, along with gendered branding and marketing. Some participants demonstrated a critical approach to manufacturers' claims and many were keen to become better informed, often through school- or peer-based interventions. Other potential interventions included age restrictions, voluntary schemes involving retailers and improved labelling.The lack of a single dominant factor in participants' consumption choices suggests that there is unlikely to be a 'silver bullet' in attempting to address this issue. However, the findings provide support for policy-level interventions that seek to change the behaviours of manufacturers and retailers as well as consumers, and actively involve children and young people where possible.

Cytotoxicity and mutagenicity of cola and grape flavored soft drinks in bone marrow cells of rodents Citotoxicidade e mutagenicidade de refrigerantes sabor cola e uva, em células de medula óssea de roedor

Directory of Open Access Journals (Sweden)

Elisângela Düsman

2013-03-01

Full Text Available Due to the large consumption of soft drinks in Brazil and worldwide in recent years and considering that some of the components present in their composition pose potential risks to human health, the aim of this study was to evaluate the cytotoxic and mutagenic potential of specific cola and grape-flavored soft drink brands. Bone marrow cells of Wistar rats were initially treated by gavage with one single dose of Cola or Grape soft drink, which was next offered ad libitum (instead of water for 24 hours. A negative control treatment was performed by administering one single dose of water and a positive control administering cyclophosphamide intraperitoneally. Statistical analysis showed that the Cola and Grape soft drinks studied were not cytotoxic. However, the Cola soft drink proved mutagenic in this experiment treatment time. Therefore, this study serves as a warning about the consumption of Cola-flavored soft drink and for the need for further subchronic and chronic studies on soft drinks in order to evaluate the long term mutagenic and cytotoxic effects of these substances.Devido ao grande consumo de refrigerantes no Brasil e no mundo nos últimos anos, e tendo em vista que alguns dos componentes presentes na composição destes possuem potenciais danosos para os organismos, em especial o humano, o objetivo deste trabalho foi avaliar o potencial citotóxico e mutagênico de uma marca de refrigerante sabor Cola e uma de sabor Uva. Foram utilizadas como sistema-teste as células de medula óssea de ratos Wistar, tratados via gavagem com dose única do refrigerante sabor Cola ou Uva e, em seguida, fornecidos ad libitum (no lugar da água, por 24 horas. Foi feito um controle negativo, administrando água, em dose única, e um controle positivo administrando ciclofosfamida, via intraperitoneal. A análise estatística mostrou que os refrigerantes sabor Cola e Uva não foram citotóxicos. Entretanto, o refrigerante sabor Cola foi mutagênico neste

Soft drink intake at age six and nine and the association with BMI three and seven years later - A follow-up study based on the Copenhagen School Child Intervention Study (CoSCIS)

DEFF Research Database (Denmark)

Jensen, Britt Wang; Nielsen, Birgit Marie; Husby, Ida

Introduction: The consumption of sugar-sweetened beverages is one of the few dietary components that have been associated with the development of obesity. However, most previous studies have been based on children or adolescents aged 8 years or more. Method: The study was based on the Copenhagen......-days pre-printed food record. Analyses were conducted using the mixed model approach for repeated measurements and were adjusted for gender, puberty, parental BMI, municipality, school, baseline BMI, SES and physical activity. Results: 154 children, 68 boys and 86 girls were included in the analyses....... Mean intake of soft drinks was 0.14 l/d at age 6 and 0.12 l/d at age 9 (difference p=0.08). No associations were found between intake of soft drink at age 6 and BMI at age 13 (b:-0.8; p=0.91), or intake at age 9 and BMI at age 13 (b:-0.3; p= 0.80). Neither was the change in intake of soft drinks from...

The Utilization of Canna Starch (Canna edulis Ker As A Alternative Hydrocolloid on The Manufacturing Process of Yogurt Drink

Directory of Open Access Journals (Sweden)

Ahmad Khoirul Umam

2018-03-01

Full Text Available Yogurt as a fermented dairy product has been providing several benefits for human health and appropriate for people with lactose intolerance. Recently, the consumption level of yogurt has significantly increased. Starch can be used as an alternative hydrocolloid in the manufacturing process of yogurt. Indonesian Canna edulis Ker contains 63.27% amylopectin that has the potential used as an alternative hydrocolloid. Amylopectin has a very high capability of the water holding capacity to increase the viscosity and maintain the stability of yogurt drink. The present research was to determine the additional effects of Canna starch as an alternative hydrocolloid on the physicochemical and sensory properties of the yogurt drink during storage. Concentrations of 0.1%, 0.2%, 0.3%, and 0.4% canna starch and 0.2% CMC (control were added to make yogurt. All treatments were carried out with four replications. Samples were refrigerated at 4oC for 24 hours and then analyzed for pH, titratable acidity, viscosity, syneresis, sedimentable fraction, and sensory properties. Data were analyzed by one way ANOVA, and followed by Duncan's multiple range test (DMRT. Data from the pH, titratable acidity, syneresis, sedimentable fraction, viscosity and sensory analyses obtained from the present study indicated that concentration of 0.1–0.4% (w/v Canna starch could be applicable in the manufacture of the yogurt drink. Furthermore, it was found that 0.1% (w/v of Canna starch selected as the best concentration could be used in yogurt manufacture process that resulted in similar sensory quality compared with CMC as commercial hydrocolloid.

Testing for heterogeneous business practices across firms in developing countries: The case of the Brazilian soft drink industry

OpenAIRE

Salvo, Alberto

2006-01-01

This paper estimates a structural model of the Brazilian carbonated soft drink industry to test the claim that the observed low prices of low-end entrants owe to marginal cost advantages over the large, established brands, allegedly stemming chiefly from tax evasion. Such entrants, numbering in the hundreds, are typically small-scale operations, with limited geographic reach and no advertising. In addition to the low-cost hypothesis, advocated by the incumbent duopolists, the model allows for...

Relationship between premature loss of primary teeth with oral hygiene, consumption of soft drinks, dental care, and previous caries experience.

Science.gov (United States)

López-Gómez, Sandra Aremy; Villalobos-Rodelo, Juan José; Ávila-Burgos, Leticia; Casanova-Rosado, Juan Fernando; Vallejos-Sánchez, Ana Alicia; Lucas-Rincón, Salvador Eduardo; Patiño-Marín, Nuria; Medina-Solís, Carlo Eduardo

2016-02-26

We determine the relationship between premature loss of primary teeth and oral hygiene, consumption of soft drinks, dental care and previous caries experience. This study focused on 833 Mexican schoolchildren aged 6-7. We performed an oral examination to determine caries experience and the simplified oral hygiene index. The dependent variable was the prevalence of at least one missing tooth (or indicated for extraction) of the primary dentition; this variable was coded as 0 = no loss of teeth and 1 = at least one lost primary tooth. The prevalence of at least one missing tooth was 24.7% (n = 206) (95% CI = 21.8-27.7). The variables that were associated with the prevalence of tooth loss (p oral hygiene (OR = 3.24), a lower frequency of brushing (OR = 1.60), an increased consumption of soda (OR = 1.89) and use of dental care (curative: OR = 2.83, preventive: OR = 1.93). This study suggests that the premature loss of teeth in the primary dentition is associated with oral hygiene, consumption of soft drinks, dental care and previous caries experience in Mexican schoolchildren. These data provide relevant information for the design of preventive dentistry programs.

Remineralizing effect of a zinc-hydroxyapatite toothpaste on enamel erosion caused by soft drinks: Ultrastructural analysis.

Science.gov (United States)

Colombo, Marco; Mirando, Maria; Rattalino, Davide; Beltrami, Riccardo; Chiesa, Marco; Poggio, Claudio

2017-07-01

The aim of the present in vitro study was to evaluate the protective effects of a zinc-hydroxyapatite toothpaste on repairing enamel erosion produced by a soft drink (Coca-Cola) compared to toothpastes with and without fluoride using Scanning Electron Microscopy (SEM). Fifty specimens were assigned to 5 groups of 10 specimens each. (Group 1: no erosive challenge, no toothpaste treatment, group 2: erosive challenge, no toothpaste treatment, 3: erosive challenge, toothpaste without fluoride, group 4: erosive challenge, fluoride toothpaste treatment, group 5: erosive challenge, zinc-hydroxyapatite toothpaste treatment). Repeated erosive challenges were provided by immersing bovine enamel specimens (10 per group) in a soft drink for 2 min (6mL, room temperature) at 0, 8, 24 and 32 h. After each erosive challenge, the toothpastes were applied neat onto the surface of specimens for 3 min without brushing and removed with distilled water. Between treatments the specimens were kept in artificial saliva. The surface of each specimen was imaged by SEM. Statistically significant differences were found between the samples used as control and those immersed in Coca-Cola (group 1 and 2): indeed among all groups the highest grade of damage was found in group 2. Instead the lowest grade was recorded in the samples of group 5 (Zinc hydroxyapatite toothpaste). The results of this study confirmed the potential benefit the Zn-HAP technology could provide in protecting enamel from erosive acid challenges. The treatment of erosively challenged enamel with Zn-Hap toothpaste showed a clear protective effect. Key words: Dental erosion, enamel, SEM, toothpaste.

Energy Drinks. Prevention Update

Science.gov (United States)

Higher Education Center for Alcohol, Drug Abuse, and Violence Prevention, 2010

2010-01-01

High-caffeine soft drinks have existed in the United States since at least the 1980s beginning with Jolt Cola. Energy drinks, which have caffeine as their primary "energy" component, began being marketed as a separate beverage category in the United States in 1997 with the introduction of the Austrian import Red Bull. Energy drink…

Effects of Processing Conditions During Manufacture on Retronasal-Aroma Compounds from a Milk Coffee Drink.

Science.gov (United States)

Ikeda, Michio; Akiyama, Masayuki; Hirano, Yuta; Miyazi, Kazuhiro; Kono, Masaya; Imayoshi, Yuriko; Iwabuchi, Hisakatsu; Onodera, Takeshi; Toko, Kiyoshi

2018-03-01

To develop a ready-to-drink (RTD) milk coffee retaining the original coffee flavor, the effects of processing conditions during manufacture on retronasal-arma (RA) compounds from the milk coffee were investigated by gas chromatography-mass spectrometry using an RA simulator (RAS). Thirteen of 46 detected compounds in the RAS effluent (RAS compounds) decreased significantly following pH adjustment of coffee (from pH 5.1 to 6.8) and 5 compounds increased. RAS compounds from coffee tended to decrease through the pH adjustment and subsequent sterilization. Significantly higher amounts of 13 RAS compounds were released from the milk coffee produced using a blending-after-sterilization (BAS) process without the pH adjustment than from that using a blending-before-sterilization (BBS) process with the pH adjustment. In BAS-processed milk coffee, significantly lower amounts of 8 high-volatility compounds and 1H-pyrrole were released from coffee containing infusion-sterilized (INF) milk than from coffee containing plate-sterilized (PLT) milk, whereas 3 low-volatility compounds were released significantly more from coffee using PLT milk. Principal component analysis revealed that the effect of the manufacturing process (BAS, BBS, or homemade (blending unsterilized coffee without pH adjustment with sterilized milk)) on milk coffee volatiles was larger than that of the sterilization method (INF or PLT) for milk, and that the sterilization method could result in different RAS volatile characteristics in BAS and homemade processes. In conclusion, a BAS process was found to be superior to a BBS process for the manufacture of an RTD milk coffee that retains volatile characteristics similar to that of a homemade milk coffee. Ready-to-drink (RTD) milk coffee manufactured using the conventional blending-before-sterilization process does not retain its original coffee flavor due to pH adjustment of the coffee during the process. The new blending-after-sterilization (BAS) process

Effect of soft drinks on proximal plaque pH at normal and low salivary secretion rates.

Science.gov (United States)

Johansson, Ann-Katrin; Lingström, Peter; Birkhed, Dowen

2007-11-01

The aim of this study was to investigate the effect of different types of drinks on plaque pH during normal and drug-induced low salivary secretion rates. Three drinks were tested in 10 healthy adult subjects: 1) Coca-Cola regular, 2) Coca-Cola light, and 3) fresh orange juice. pH was measured in the maxillary incisor and premolar region with the microtouch method. The area under the pH curve (AUC) was calculated. During normal salivary condition, mouth-rinsing with Coca-Cola regular resulted in a slightly more pronounced drop in pH during the first few minutes than it did with orange juice. After this initial phase, both products showed similar and relatively slow pH recovery. Coca-Cola light also resulted in low pH values during the very first minutes, but thereafter in a rapid recovery back to baseline. During dry mouth conditions, the regular Cola drink showed a large initial drop in pH, and slightly more pronounced than for orange juice. After the initial phase, both products had a similar and slow recovery back to baseline. At most time-points, AUC was significantly greater in dry conditions compared to normal conditions for Coca-Cola regular and orange juice, but not for Coca-Cola light. Coca-Cola light generally showed a significantly smaller AUC than Coca-Cola regular and orange juice. The main conclusion from this study is that a low salivary secretion rate may accentuate the fall in pH in dental plaque after gentle mouth-rinsing with soft drinks.

Soft drink consumption and obesity: it is all about fructose.

Science.gov (United States)

Bray, George A

2010-02-01

The purpose of the review is to suggest that fructose, a component of both sucrose (common sugar) and high fructose corn syrup, should be of concern to both healthcare providers and the public. Consumption of sugar-sweetened beverages has increased steadily over the past century and with this increase has come more and more reports associating their use with the risk of overweight, diabetes and cardiometabolic disease. In a meta-analysis of the relationship between soft drink consumption and cardiometabolic risk, there was a 24% overall increased risk comparing the top and bottom quantiles of consumption. Several factors might account for this increased risk, including increased carbohydrate load and increased amounts of dietary fructose. Fructose acutely increases thermogenesis, triglycerides and lipogenesis as well as blood pressure, but has a smaller effect on leptin and insulin release than comparable amounts of glucose. In controlled feeding studies, changes in body weight, fat storage and triglycerides are observed as well as an increase in inflammatory markers. The present review concludes on the basis of the data assembled here that in the amounts currently consumed, fructose is hazardous to the cardiometabolic health of many children, adolescents and adults.

Emissions of volatile organic compounds (VOCs) from the food and drink industries of the European community

Science.gov (United States)

Passant, Neil R.; Richardson, Stephen J.; Swannell, Richard P. J.; Gibson, N.; Woodfield, M. J.; van der Lugt, Jan Pieter; Wolsink, Johan H.; Hesselink, Paul G. M.

Estimates were made of the amounts of volatile organic compounds (VOCs) released into the atmosphere as a result of the industrial manufacture and processing of food and drink in the European Community. The estimates were based on a review of literature sources, industrial and government contacts and recent measurements. Data were found on seven food manufacturing sectors (baking, vegetable oil extraction, solid fat processing, animal rendering, fish meal processing, coffee production and sugar beet processing) and three drink manufacturing sectors (brewing, spirit production and wine making). The principle of a data quality label is advocated to illustrate the authors' confidence in the data, and to highlight areas for further research. Emissions of ethanol from bread baking and spirit maturation were found to be the principle sources. However, significant losses of hexane and large quantities of an ill-defined mixture of partially oxidized hydrocarbons were noted principally from seed oil extraction and the drying of plant material, respectively. This latter mixture included low molecular weight aldehydes, carboxylic acids, ketones, amines and esters. However, the precise composition of many emissions were found to be poorly understood. The total emission from the food and drink industry in the EC was calculated as 260 kt yr -1. However, many processes within the target industry were found to be completely uncharacterized and therefore not included in the overall estimate (e.g. soft drink manufacture, production of animal food, flavourings, vinegar, tea, crisps and other fried snacks). Moreover, the use of data quality labels illustrated the fact that many of our estimates were based on limited data. Hence, further emissions monitoring is recommended from identified sources (e.g. processing of sugar beet, solid fat and fish meal) and from uncharacterized sources.

Development and Validation of HPLC Method for the Simultaneous Determination of Five Food Additives and Caffeine in Soft Drinks

Directory of Open Access Journals (Sweden)

Bürge Aşçı

2016-01-01

Full Text Available Box-Behnken design was applied to optimize high performance liquid chromatography (HPLC conditions for the simultaneous determination of potassium sorbate, sodium benzoate, carmoisine, allura red, ponceau 4R, and caffeine in commercial soft drinks. The experimental variables chosen were pH (6.0–7.0, flow rate (1.0–1.4 mL/min, and mobile phase ratio (85–95% acetate buffer. Resolution values of all peak pairs were used as a response. Stationary phase was Inertsil OctaDecylSilane- (ODS- 3V reverse phase column (250 × 4.6 mm, 5 μm dimensions. The detection was performed at 230 nm. Optimal values were found 6.0 pH, 1.0 mL/min flow rate, and 95% mobile phase ratio for the method which was validated by calculating the linearity (r2>0.9962, accuracy (recoveries ≥ 95.75%, precision (intraday variation ≤ 1.923%, interday variation ≤ 1.950%, limits of detection (LODs, and limits of quantification (LOQs parameters. LODs and LOQs for analytes were in the range of 0.10–0.19 μg/mL and 0.33–0.63 μg/mL, respectively. The proposed method was applied successfully for the simultaneous determination of the mixtures of five food additives and caffeine in soft drinks.

Mohos y levaduras en agua envasada y bebidas sin alcohol Moulds and yeasts in bottled water and soft drinks

Directory of Open Access Journals (Sweden)

E. G. Ancasi

2006-04-01

Full Text Available La aparición esporádica de alteraciones en algunos envases dentro de lotes de aguas carbonatadas y de bebidas con zumos frutales (carbonatadas y no carbonatadas motivó la presente investigación, en la que se determinaron los microorganismos causantes del deterioro observado. También se estudiaron los contaminantes del azúcar utilizado en la elaboración de una de las bebidas analizadas. Se emplearon los métodos de Déak y Beuchat y de Pitt y Hocking para la identificación de levaduras y de mohos, respectivamente. Las levaduras causantes del deterioro de las bebidas fueron Debaryomyces hansenii, Debaryomyces polymorphus, Galactomyces geotrichum, Metschnikowia pulcherrima, Mucor circinelloides, Pichia anomala, Pichia jadinii, Pichia subpelliculosa, Rhodotorula glutinis y Zygosaccharomyces bailii. Los mohos y las levaduras encontrados en el azúcar fueron Aspergillus niger, Aspergillus penicilloides, Aspergillus versicolor, Cladosporium sphaerospermum, Mucor racemosus, Pichia anomala y Rhizopus stolonifer. En el agua carbonatada se encontraron los mohos Paecilomyces fulvus y Penicillium glabrum.Some damaged cartons of soft drinks and carbonated water were analyzed to detect the microorganisms that caused the damage. The contaminants of sugar used in the production of one of the drinks were also studied. The methods of Déak & Beuchat and Pitt & Hocking were used for the identification of yeasts and moulds, respectively. The agents of the spoilage of soft drinks were Debaryomyces hansenii, Debaryomyces polymorphus, Galactomyces geotrichum, Metschnikowia pulcherrima, Mucor circinelloides, Pichia anomala, Pichia jadinii, Pichia subpelliculosa, Rhodotorula glutinis and Zygosaccharomyces bailii. The microorganisms found in sugar were Aspergillus niger, Aspergillus penicilloides, Aspergillus versicolor, Cladosporium sphaerospermum, Mucor racemosus, P. anomala and Rhizopus stolonifer. Paecilomyces fulvus and Penicillium glabrum were observed in

Soft electronics for soft robotics

Science.gov (United States)

Kramer, Rebecca K.

2015-05-01

As advanced as modern machines are, the building blocks have changed little since the industrial revolution, leading to rigid, bulky, and complex devices. Future machines will include electromechanical systems that are soft and elastically deformable, lending them to applications such as soft robotics, wearable/implantable devices, sensory skins, and energy storage and transport systems. One key step toward the realization of soft systems is the development of stretchable electronics that remain functional even when subject to high strains. Liquid-metal traces embedded in elastic polymers present a unique opportunity to retain the function of rigid metal conductors while leveraging the deformable properties of liquid-elastomer composites. However, in order to achieve the potential benefits of liquid-metal, scalable processing and manufacturing methods must be identified.

Design and fabrication of soft x-ray mirrors

Energy Technology Data Exchange (ETDEWEB)

Kawata, Masaru; Sasai, Hiroyuki; Sano, Kazuo [Shimadzu Corp., Production Engineering Laboratory, Kyoto (Japan)

2000-03-01

Soft x-ray photoelectron spectroscopic technology is important for measuring the chemical status of material surface in the LSI manufacturing process. We report on non-spherical mirrors focusing laser-induced plasma soft x-ray to fine sample surface. We designed toric and ellipsoidal mirror as soft x-ray condensing means, simulated focusing image, manufactured mirror surface on fused quartz substrate, and measured form accuracy. (author)

Enteric bacteria of food ice and their survival in alcoholic beverages and soft drinks.

Science.gov (United States)

Gaglio, Raimondo; Francesca, Nicola; Di Gerlando, Rosalia; Mahony, Jennifer; De Martino, Simone; Stucchi, Carlo; Moschetti, Giancarlo; Settanni, Luca

2017-10-01

This study aimed to evaluate the levels of enteric bacteria in ice cubes produced in different environments (home-made, prepared in bars and pubs with ice machines and produced in industrial plants) and to determine their survival in different alcoholic beverages and soft drinks. Members of the Enterobacteriaceae family were found in almost all samples analysed. All industrial and the majority of home-made samples did not contain coliforms. Enterococci were not identified in domestic samples while they were detected in two industrial and three bar/pub samples. The samples collected from bars and pubs were characterized by the highest levels of enteric bacteria. Fourteen strains representing 11 species of eight bacterial genera were identified, some of which are known agents of human infections. The most numerous groups included Enterococcus and Stenotrophomonas. The survival of Enterococcus faecium ICE41, Pantoea conspicua ICE80 and Stenotrophomonas maltophilia ICE272, that were detected at the highest levels (100-400 CFU/100 mL thawed ice) in the ice cubes, was tested in six drinks and beverages characterized by different levels of alcohol, CO 2 , pH and the presence of antibacterial ingredients. The results showed a species-specific behaviour and, in general, a reduction of the microbiological risks associated with ice after its transfer to alcoholic or carbonated beverages. Copyright © 2017 Elsevier Ltd. All rights reserved.

Determination of cadmium and lead at sub-ppt level in soft drinks: An efficient combination between dispersive liquid-liquid microextraction and graphite furnace atomic absorption spectrometry.

Science.gov (United States)

Mandlate, Jaime S; Soares, Bruno M; Seeger, Tassia S; Vecchia, Paula Dalla; Mello, Paola A; Flores, Erico M M; Duarte, Fabio A

2017-04-15

A DLLME method for extraction and preconcentration of Cd and Pb from soft drinks and further determination by GF AAS was developed. Important parameters of DLLME such as the type and volume of dispersive and extraction solvents, concentration of DDTC (complexing agent) and pH were evaluated. Better results were obtained using 500μL of acetone for Cd and 700μL of acetonitrile for Pb as dispersive solvents, 60μL of CCl 4 as extraction solvent for both analytes and 500μL of 1.5% DDTC solution. Accuracy was evaluated by recovery assays and ranged from 91 to 113% for Cd and from 95 to 108% for Pb, with RSD below 10 and 7%, respectively. The LODs were 0.006 and 0.072ngL -1 for Cd and Pb, respectively. The optimized method was applied for the determination of Cd and Pb in soft drinks with different brands and flavours. Copyright © 2016 Elsevier Ltd. All rights reserved.

Knowledge of and attitudes to sports drinks of adolescents living in South Wales, UK.

Science.gov (United States)

Fairchild, R M; Broughton, D; Morgan, M Z

2017-06-23

Background The UK sports drinks market has a turnover in excess of £200 million. Adolescents consume 15.6% of total energy as free sugars, much higher than the recommended 5%. Sugar sweetened beverages, including sports drinks, account for 30% of total free sugar intake for those aged 11-18 years.Objective To investigate children's knowledge and attitudes surrounding sports drinks.Method One hundred and eighty-three self-complete questionnaires were distributed to four schools in South Wales. Children aged 12-14 were recruited to take part. Questions focussed on knowledge of who sports drinks are aimed at; the role of sports drinks in physical activity; and the possible detrimental effects to oral health. Recognition of brand logo and sports ambassadors and the relationship of knowledge to respondents' consumption of sports drinks were assessed.Results There was an 87% (160) response rate and 89.4% (143) claimed to drink sports drinks. 45.9% thought that sports drinks were aimed at everyone; approximately a third (50) viewed teenagers as the target group. Over two thirds recognised the brand logos, yet less than a third could identify brand ambassadors. About half were aware that dental erosion may result from consumption and approximately two thirds knew that they were linked to dental caries and energy provision. Despite this the majority claimed to drink them. As previously reported most of those drinking sports drinks did so because of the taste.Conclusion Whilst most of the respondents had some understanding of the detrimental effects on health the majority of them were drinking them regularly despite this knowledge. Work is therefore needed at a macro level, with soft drink manufacturers, to consider marketing and reformulation of products for adolescent consumers who appear to enjoy them.

Interaction Of Brand And Taste In The Liking Of Cola Drinks By School Children

OpenAIRE

Bartneck, Christoph; Bartneck, Hanna

2017-01-01

Sugar sweetened soft drinks play an important role in obesity and world wide brands, such as Coca Cola, spend considerable resources on branding and advertising. As a result, their soft drinks tend to be up to 2.5 times more expensive than store brand cola drinks. We investigated the effect that the taste and the label has on the liking of cola drinks by school children. Taste did not have any significant effect and there was a significant interaction effect between the label and the taste. T...

Global Brands and Consumer Ethnocentrism of Youth Soft Drink Consumers in Greater Jakarta, Indonesia

Directory of Open Access Journals (Sweden)

Hammam Haris Tasurru

2014-12-01

Full Text Available Indonesia is a large market for consumer products targeting youth consumers, with populations of more than 70 million young inhabitants and market size of USD 155 billion. The large size of this potential market attracts foreign products with globallyrecognized brands to enter the Indonesian market. The objective of this study is to explain the purchase intention of youth consumers toward a particular brand of soft drink with global penetration by their perceptions and ethnocentrism. This study obtained response from 156 youths in Greater Jakarta, Indonesia. The resulting data was analyzed using structural equation modeling with LISREL software package. The study found that consumer ethnocentrism decreases purchase intention, both directly and indirectly through brand image. Contrary to the hypothesis, consumer ethnocentrism does not influence corporate image of the global firm, which significantly influences brand image but only slightly impacts purchase intentions directly.

3D printing of soft robotic systems

Science.gov (United States)

Wallin, T. J.; Pikul, J.; Shepherd, R. F.

2018-06-01

Soft robots are capable of mimicking the complex motion of animals. Soft robotic systems are defined by their compliance, which allows for continuous and often responsive localized deformation. These features make soft robots especially interesting for integration with human tissues, for example, the implementation of biomedical devices, and for robotic performance in harsh or uncertain environments, for example, exploration in confined spaces or locomotion on uneven terrain. Advances in soft materials and additive manufacturing technologies have enabled the design of soft robots with sophisticated capabilities, such as jumping, complex 3D movements, gripping and releasing. In this Review, we examine the essential soft material properties for different elements of soft robots, highlighting the most relevant polymer systems. Advantages and limitations of different additive manufacturing processes, including 3D printing, fused deposition modelling, direct ink writing, selective laser sintering, inkjet printing and stereolithography, are discussed, and the different techniques are investigated for their application in soft robotic fabrication. Finally, we explore integrated robotic systems and give an outlook for the future of the field and remaining challenges.

Fundamentals of soft robot locomotion.

Science.gov (United States)

Calisti, M; Picardi, G; Laschi, C

2017-05-01

Soft robotics and its related technologies enable robot abilities in several robotics domains including, but not exclusively related to, manipulation, manufacturing, human-robot interaction and locomotion. Although field applications have emerged for soft manipulation and human-robot interaction, mobile soft robots appear to remain in the research stage, involving the somehow conflictual goals of having a deformable body and exerting forces on the environment to achieve locomotion. This paper aims to provide a reference guide for researchers approaching mobile soft robotics, to describe the underlying principles of soft robot locomotion with its pros and cons, and to envisage applications and further developments for mobile soft robotics. © 2017 The Author(s).

Effect of Soft Drink, Electronic Media Exposure, Family Income, Pocket Money, and Nutritional Status, on Age at Menarche Among Adolescents in Surakarta

OpenAIRE

Mirzawati Latifah; Bhisma Murti; Yulia Lanti Retno Dewi

2017-01-01

Background: Age at menarche has become earlier for the last 100 years. This situation poses worrying problem as it may be lead to an increased risk of premarital sex, teenage pregnancy, mental unpreparedness, and increased risk of Malignant diseases such as ovarial cancer and breast cancer. This study aimed to determine the effect of soft drink, electronic media exposure, family income, pocket money, and nutritional status, on age at menarche among adolescents in Surakarta. Subjects and Metho...

Energy Drinks: A Contemporary Issues Paper.

Science.gov (United States)

Higgins, John P; Babu, Kavita; Deuster, Patricia A; Shearer, Jane

2018-02-01

Since their introduction in 1987, energy drinks have become increasingly popular and the energy drink market has grown at record pace into a multibillion-dollar global industry. Young people, students, office workers, athletes, weekend warriors, and service members frequently consume energy drinks. Both health care providers and consumers must recognize the difference between energy drinks, traditional beverages (e.g., coffee, tea, soft drinks/sodas, juices, or flavored water), and sports drinks. The research about energy drinks safety and efficacy is often contradictory, given the disparate protocols and types of products consumed: this makes it difficult to draw firm conclusions. Also, much of the available literature is industry-sponsored. After reports of adverse events associated with energy drink consumption, concerns including trouble sleeping, anxiety, cardiovascular events, seizures, and even death, have been raised about their safety. This article will focus on energy drinks, their ingredients, side effects associated with their consumption, and suggested recommendations, which call for education, regulatory actions, changes in marketing, and additional research.

Energy drinks and escalation in drug use severity: An emergent hazard to adolescent health.

Science.gov (United States)

Leal, Wanda E; Jackson, Dylan B

2018-06-01

The aim of the current study is to determine whether energy drink consumption contributes to drug use and, more specifically, an escalation in the severity of drug use. We first examine the association between energy drink use and hard drug use, and subsequently investigate whether soft drug use mediates this relationship. Potential moderating influences are also investigated by testing whether the degree of mediation varies by age, gender, and race. The current study uses a nationally representative sample of 8th (ages 13-14), 10th (ages 15-16), and 12th (ages 17-18) grade adolescents from the 2015 Monitoring the Future survey. Negative binomial regression is employed to examine associations between energy drink consumption and soft and hard drug use. Mediation results indicate that energy drink consumption is significantly associated with increased soft drug use, which is, in turn, associated with significant increases in hard drug use. This cascading effect of energy drink consumption on drug use appears to be stronger among younger females and older males. Results for the moderating effect of race are mixed. Energy drinks appear to pose an important threat to adolescent health in the form of soft and hard drug use. The United States may want to consider adopting energy drink policies similar to European countries and Canada, which require warning labels on beverages with high caffeine content. Copyright © 2017 Elsevier Inc. All rights reserved.

Photoreversible Covalent Hydrogels for Soft-Matter Additive Manufacturing.

Science.gov (United States)

Kabb, Christopher P; O'Bryan, Christopher S; Deng, Christopher C; Angelini, Thomas E; Sumerlin, Brent S

2018-05-16

Reversible covalent chemistry provides access to robust materials with the ability to be degraded and reformed upon exposure to an appropriate stimulus. Photoresponsive units are attractive for this purpose, as the spatial and temporal application of light is easily controlled. Coumarin derivatives undergo a [2 + 2] cycloaddition upon exposure to long-wave UV irradiation (365 nm), and this process can be reversed using short-wave UV light (254 nm). Therefore, polymers cross-linked by coumarin groups are excellent candidates as reversible covalent gels. In this work, copolymerization of coumarin-containing monomers with the hydrophilic comonomer N, N-dimethylacrylamide yielded water-soluble, linear polymers that could be cured with long-wave UV light into free-standing hydrogels, even in the absence of a photoinitiator. Importantly, the gels were reverted back to soluble copolymers upon short-wave UV irradiation. This process could be cycled, allowing for recycling and remolding of the hydrogel into additional shapes. Further, this hydrogel can be imprinted with patterns through a mask-based, post-gelation photoetching method. Traditional limitations of this technique, such as the requirement for uniform etching in one direction, have been overcome by combining these materials with a soft-matter additive manufacturing methodology. In a representative application of this approach, we printed solid structures in which the interior coumarin-cross-linked gel is surrounded by a nondegradable gel. Upon exposure to short-wave UV irradiation, the coumarin-cross-linked gel was reverted to soluble prepolymers that were washed away to yield hollow hydrogel objects.

Fundamentals of soft robot locomotion

OpenAIRE

Calisti, M.; Picardi, G.; Laschi, C.

2017-01-01

Soft robotics and its related technologies enable robot abilities in several robotics domains including, but not exclusively related to, manipulation, manufacturing, human���robot interaction and locomotion. Although field applications have emerged for soft manipulation and human���robot interaction, mobile soft robots appear to remain in the research stage, involving the somehow conflictual goals of having a deformable body and exerting forces on the environment to achieve locomotion. This p...

Alpha particle induced soft errors in NMOS RAMs: a review

International Nuclear Information System (INIS)

Carter, P.M.; Wilkins, B.R.

1987-01-01

The paper aims to explain the alpha particle induced soft error phenomenon using the NMOS dynamic random access memory (RAM) as a model. It discusses some of the many techniques experimented with by manufacturers to overcome the problem, and gives a review of the literature covering most aspects of soft errors in dynamic RAMs. Finally, the soft error performance of current dynamic RAM and static RAM products from several manufacturers are compared. (author)

Effect of bleaching agents and soft drink on titanium surface topography.

Science.gov (United States)

Faverani, Leonardo P; Barão, Valentim A R; Ramalho-Ferreira, Gabriel; Ferreira, Mayara B; Garcia-Júnior, Idelmo R; Assunção, Wirley G

2014-01-01

The effects of carbamide peroxide, hydrogen peroxide and cola soft drink on the topographic modifications of commercially-pure titanium (CP-Ti) and Ti-6Al-4V were investigated. Ti discs were divided into 18 groups (n = 4) based on the solution treatment and Ti type. Specimens were immersed in 3 mL of each solution for 4 h per day (for the remaining 20 h, discs were left dry or immersed in artificial saliva) for 15 days. For control, specimens were immersed in only artificial saliva. Ti surfaces were examined using scanning electron (SEM) and atomic force (AFM) microscopes and their surface roughness (in µm) and surface chemical modifications were investigated. Data were analyzed by ANOVA and Tukey's test (α = 0.05). Groups immersed in 35% hydrogen peroxide showed the highest roughness (Ra) (171.65 ± 4.04 for CP-Ti and 145.91 ± 14.71 for Ti-6Al-4V) (p  0.05). SEM and AFM revealed dramatic changes in the specimens surfaces immersed in the 35% hydrogen peroxide, mainly for CP-Ti. No detectable chemical modifications on the Ti surface were observed. Bleaching agents promoted significant changes in Ti topography, which could affect the longevity of implants treatments. Copyright © 2013 Wiley Periodicals, Inc.

Scalable fabric tactile sensor arrays for soft bodies

Science.gov (United States)

Day, Nathan; Penaloza, Jimmy; Santos, Veronica J.; Killpack, Marc D.

2018-06-01

Soft robots have the potential to transform the way robots interact with their environment. This is due to their low inertia and inherent ability to more safely interact with the world without damaging themselves or the people around them. However, existing sensing for soft robots has at least partially limited their ability to control interactions with their environment. Tactile sensors could enable soft robots to sense interaction, but most tactile sensors are made from rigid substrates and are not well suited to applications for soft robots which can deform. In addition, the benefit of being able to cheaply manufacture soft robots may be lost if the tactile sensors that cover them are expensive and their resolution does not scale well for manufacturability. This paper discusses the development of a method to make affordable, high-resolution, tactile sensor arrays (manufactured in rows and columns) that can be used for sensorizing soft robots and other soft bodies. However, the construction results in a sensor array that exhibits significant amounts of cross-talk when two taxels in the same row are compressed. Using the same fabric-based tactile sensor array construction design, two different methods for cross-talk compensation are presented. The first uses a mathematical model to calculate a change in resistance of each taxel directly. The second method introduces additional simple circuit components that enable us to isolate each taxel electrically and relate voltage to force directly. Fabric sensor arrays are demonstrated for two different soft-bodied applications: an inflatable single link robot and a human wrist.

Soft magnetic moldable composites: Properties and applications

Energy Technology Data Exchange (ETDEWEB)

Svensson, Leif, E-mail: leif.svensson@iprod.lth.se [Lund University, Division of Production and Materials Engineering, Box 188, 221 00 Lund (Sweden); Frogner, Kenneth, E-mail: kenneth.frogner@iprod.lth.se [Lund University, Division of Production and Materials Engineering, Box 188, 221 00 Lund (Sweden); Jeppsson, Peter, E-mail: peter.jeppsson@iprod.lth.se [Lund University, Division of Production and Materials Engineering, Box 188, 221 00 Lund (Sweden); Cedell, Tord, E-mail: tord.cedell@iprod.lth.se [Lund University, Division of Production and Materials Engineering, Box 188, 221 00 Lund (Sweden); Andersson, Mats, E-mail: mats.andersson@iprod.lth.se [Lund University, Division of Production and Materials Engineering, Box 188, 221 00 Lund (Sweden)

2012-09-15

A new type of electromagnetic soft magnetic material (SMM) is introduced, based on spherical iron powder particles and a suitable polymer binder. A key feature of this material is that it can be cast or molded into almost any 3D shape, hence the denotation soft magnetic moldable composite (SM{sup 2}C). The SM{sup 2}C is compared with a set of reference materials, such as ferrites, laminated steels, and soft magnetic composites, in terms of primary properties such as permeability and loss, and other properties, such as thermal conductivity and manufacturability. The SM{sup 2}C has the obvious disadvantage of relatively low permeability, but offers benefits such as relatively low losses and high potential for close integration into electromagnetic circuits. Some recent SM{sup 2}C applications are illustrated, and design and manufacturing aspects are discussed. - Highlights: Black-Right-Pointing-Pointer A new type of soft magnetic composite is introduced. Black-Right-Pointing-Pointer Properties are compared to other flux core materials. Black-Right-Pointing-Pointer The new material has low losses but also low permeability. Black-Right-Pointing-Pointer Potential benefits in freedom of design and manufacturing issues.

Population-based strategies to control manufacturing epidemics.

Science.gov (United States)

Gorini, Giuseppe

2017-01-01

"The multinational corporations producing tobacco, alcohol, soft drinks, and processed foods have a role of vectors in the increase of chronic diseases, so that one can speak of manufacturing epidemics. The main aim of this paper is to conduct a literature review on different approaches in population-based interventions to stem the rise in consumption of unhealthy products. Different approaches were found: • command-and-control regulations: the route is definitely more advanced for tobacco with the implementation of an international treaty, which requires 180 ratifying states to implement a series of tobacco control policies. Similar regulations have been partially adopted to reduce alcohol use and to increase taxes of sugar-sweetened beverages; • multinational corporations in few Countries can voluntarily adopt recommendations on media campaigns and on labelling of soft drinks and processed foods; • in order to reduce salt in foods, many Countries developed voluntary agreements with industries with monitoring systems to assess compliance. Population-based interventions to try to align the interests of multinational corporations with those of public health are described in literature: • the "Health Footprint" programme; • the performance-based regulation which could oblige industry to take responsibility to reduce the harmful consequences of the use of their unhealthy commodities; • the price-cap regulation, usually applied to the utilities sector, would set a cap on the price of the tobacco industry, raising the tobacco taxes by 500 million euros per year. In order to reduce the burden of chronic disease, one of the objectives of the Italian National Prevention Plan, a working group including non-governmental organizations and experts in communication, social marketing, and lifestyles should be organized by the Ministry of Health in order to identify which population-based interventions could be implemented in Italy in next years to stem the rise of

Business Strategy of CV Jaya Sampurna in Facing Soft Drink Distributor Competition in Bekasi

Directory of Open Access Journals (Sweden)

Seri Nurmala

2015-11-01

Full Text Available CV Jaya Sampurna is a soft drink distributor in Bekasi. Distributor company has a low profit margin, moreover the product sold is Fast Moving Consumers Goods with a very low profit margin (3.5%–5%. Therefore the company depends on a high volume of sales. Besides, there are many competitors in this industry, thus the business strategy is needed to improve the competitive advantage of the company. Given the conditions,this research was to identify the internal and the external factors, to identify the formulation of business strategy alternative, and to identify the recommendation of functional strategy for CV Jaya Sampurna. Research used descriptive method; and the type of research used was case study. Data were gathered from questionnaires and interview to three member of managers: Director, Operational Manager, and Finance Manager. Data wereanalyzed by using EFE, IFE, SWOT, IE, Grand Strategy Matrix and QSPM. The result of this research implies that the alternative strategy based on QSPM’s result was market penetration

AFM Structural Characterization of Drinking Water Biofilm ...

Science.gov (United States)

Due to the complexity of mixed culture drinking water biofilm, direct visual observation under in situ conditions has been challenging. In this study, atomic force microscopy (AFM) revealed the three dimensional morphology and arrangement of drinking water relevant biofilm in air and aqueous solution. Operating parameters were optimized to improve imaging of structural details for a mature biofilm in liquid. By using a soft cantilever (0.03 N/m) and slow scan rate (0.5 Hz), biofilm and individual bacterial cell’s structural topography were resolved and continuously imaged in liquid without loss of spatial resolution or sample damage. The developed methodology will allow future in situ investigations to temporally monitor mixed culture drinking water biofilm structural changes during disinfection treatments. Due to the complexity of mixed culture drinking water biofilm, direct visual observation under in situ conditions has been challenging. In this study, atomic force microscopy (AFM) revealed the three dimensional morphology and arrangement of drinking water relevant biofilm in air and aqueous solution. Operating parameters were optimized to improve imaging of structural details for a mature biofilm in liquid. By using a soft cantilever (0.03 N/m) and slow scan rate (0.5 Hz), biofilm and individual bacterial cell’s structural topography were resolved and continuously imaged in liquid without loss of spatial resolution or sample damage. The developed methodo

Soft robot design methodology for `push-button' manufacturing

Science.gov (United States)

Paik, Jamie

2018-06-01

`Push-button' or fully automated manufacturing would enable the production of robots with zero intervention from human hands. Realizing this utopia requires a fundamental shift from a sequential (design-materials-manufacturing) to a concurrent design methodology.

Differential hypothalamic leptin sensitivity in obese rat offspring exposed to maternal and postnatal intake of chocolate and soft drink

DEFF Research Database (Denmark)

Gerstenberg, Marina Kjærgaard; Nilsson, C; Secher, A

2017-01-01

Background/objective: Intake of high-energy foods and maternal nutrient overload increases the risk of metabolic diseases in the progeny such as obesity and diabetes. We hypothesized that maternal and postnatal intake of chocolate and soft drink will affect leptin sensitivity and hypothalamic...... for the metabolic phenotype in the offspring if they continued on the S diet in postnatal life. These offspring displayed obesity despite lowered energy intake associated with alterations in hypothalamic leptin signalling....... assigned to either S or C diet, giving four groups until the end of the experiment at 26 weeks of age. Results: As expected, adult offspring fed the S diet post weaning became obese (body weight: P

Utilisation of drinking water treatment sludge for the manufacturing of ceramic products

Science.gov (United States)

Kizinievič, O.; Kizinievič, V.

2017-10-01

The influence of the additive of drinking water treatment sludge on the physical and mechanical properties, structural parameters, microstructure of the ceramic products is analysed in the research. Drinking water treatment sludge is renewable, environmentally-friendly, economical additive saving expensive natural raw materials when introduced into the ceramic products. The main drinking water treatment sludge component is amorphous Fe2O3 (70%). Formation masses are prepared by incorporating from 5 % to 60 % of drinking water treatment additive and by burning out at the temperature 1000 °C. Investigation showed that the physical and mechanical properties, microstructure of the ceramic bodies vary depending on the amount of drinking water treatment additive incorporated. In addition, drinking water treatment additive affects the ceramic body as a pigment that dyes the ceramic body in darker red colour.

Adolescent impulsivity and soft drink consumption: The role of parental regulation.

Science.gov (United States)

Melbye, Elisabeth L; Bergh, Ingunn H; Hausken, Solveig E S; Sleddens, Ester F C; Glavin, Kari; Lien, Nanna; Bjelland, Mona

2016-01-01

The present study aimed to explore the process in which impulsivity might influence soft drink consumption in adolescents, addressing potential mediating effects of perceived parental regulation regarding unhealthy eating. A cross-sectional survey was performed among 440 13-15-year-olds in Eastern Norway. The survey questionnaire included measures of impulsivity, six types of maternal and paternal regulation (as perceived by the adolescents), and consumption of sugar-sweetened beverages (SSB). Parallel multiple-mediator analyses were performed to reveal potential mediating effects of perceived parental regulatory behaviors on the association between adolescent impulsivity and SSB consumption. Separate models were run for maternal and paternal regulation. Results from our model analyses (both maternal and paternal models) indicated that all the six measured parental regulatory behaviors jointly acted as mediators on the association between adolescent impulsivity and SSB consumption. However, only perceived maternal and paternal legitimacy of regulation showed a unique contribution to the mediated effect. This finding suggests that adolescents' perception of parental legitimate authority is of particular importance in explaining the relationship between impulsivity and unhealthy eating behaviors in adolescents. Future nutrition interventions targeting adolescents and their parents should take personal factors such as adolescents' level of impulsivity into account. Ultimately; what may be an appropriate approach to impulsive individuals and their parents may diverge from what may be an appropriate approach to less impulsive individuals and their parents. Copyright © 2015 Elsevier Ltd. All rights reserved.

In-line ATR-UV and Raman Spectroscopy for Monitoring API Dissolution Process During Liquid-Filled Soft-Gelatin Capsule Manufacturing.

Science.gov (United States)

Wan, Boyong; Zordan, Christopher A; Lu, Xujin; McGeorge, Gary

2016-10-01

Complete dissolution of the active pharmaceutical ingredient (API) is critical in the manufacturing of liquid-filled soft-gelatin capsules (SGC). Attenuated total reflectance UV spectroscopy (ATR-UV) and Raman spectroscopy have been investigated for in-line monitoring of API dissolution during manufacturing of an SGC product. Calibration models have been developed with both techniques for in-line determination of API potency. Performance of both techniques was evaluated and compared. The ATR-UV methodology was found to be able to monitor the dissolution process and determine the endpoint, but was sensitive to temperature variations. The Raman technique was also capable of effectively monitoring the process and was more robust to the temperature variation and process perturbations by using an excipient peak for internal correction. Different data preprocessing methodologies were explored in an attempt to improve method performance.

Children and young people’s perceptions of energy drinks: A qualitative study

Science.gov (United States)

2017-01-01

Background Consumption of soft drinks is declining in many countries, yet energy drink sales continue to increase, particularly amongst young consumers. Little is currently known about the drivers behind these trends. Energy drinks are high in sugar and caffeine, and evidence indicates that regular or heavy use by under 18s is likely to be detrimental to health. This study aimed to explore children and young people’s attitudes and perceptions in relation to energy drinks in a UK context. Methods Eight focus groups were conducted with pupils aged 10–11 years (n = 20) and 13–14 years (n = 17) from four schools in northern England. A sub-sample also took part in a mapping exercise to generate further insights. Data were analysed using the constant comparative approach. Results Energy drinks were reportedly consumed in a variety of public and private places, generally linked to social activities, sports and computer gaming (particularly amongst boys). Participants demonstrated strong brand awareness and preferences that were linked to taste and perceived value for money. The relatively low price of energy drinks and their widespread availability were identified as key factors, along with gendered branding and marketing. Some participants demonstrated a critical approach to manufacturers’ claims and many were keen to become better informed, often through school- or peer-based interventions. Other potential interventions included age restrictions, voluntary schemes involving retailers and improved labelling. Conclusions The lack of a single dominant factor in participants’ consumption choices suggests that there is unlikely to be a ‘silver bullet’ in attempting to address this issue. However, the findings provide support for policy-level interventions that seek to change the behaviours of manufacturers and retailers as well as consumers, and actively involve children and young people where possible. PMID:29190753

Printing soft matter in three dimensions

Science.gov (United States)

Truby, Ryan L.; Lewis, Jennifer A.

2016-12-01

Light- and ink-based three-dimensional (3D) printing methods allow the rapid design and fabrication of materials without the need for expensive tooling, dies or lithographic masks. They have led to an era of manufacturing in which computers can control the fabrication of soft matter that has tunable mechanical, electrical and other functional properties. The expanding range of printable materials, coupled with the ability to programmably control their composition and architecture across various length scales, is driving innovation in myriad applications. This is illustrated by examples of biologically inspired composites, shape-morphing systems, soft sensors and robotics that only additive manufacturing can produce.

Sugary drinks in the pathogenesis of obesity and cardiovascular diseases.

Science.gov (United States)

Brown, C M; Dulloo, A G; Montani, J-P

2008-12-01

Soft drink overconsumption is now considered to be a major public health concern with implications for cardiovascular diseases. This follows a number of studies performed in animals suggesting that chronic consumption of refined sugars can contribute to metabolic and cardiovascular dysregulation. In particular, the monosaccharide fructose has been attracting increasing attention as the more harmful sugar component in terms of weight gain and metabolic disturbances. High-fructose corn syrup is gradually replacing sucrose as the main sweetener in soft drinks and has been blamed as a potential contributor to the current high prevalence of obesity. There is also considerable evidence that fructose, rather than glucose, is the more damaging sugar component in terms of cardiovascular risk. This review focuses on the potential role of sugar drinks, particularly the fructose component, in the pathogenesis of obesity and cardiovascular diseases.

Influence of Injection-Molding Process Parameters on Part Replication of Microstructures with Additively-Manufactured Soft Tooling Inserts WCMNM 2017 No

DEFF Research Database (Denmark)

Mischkot, Michael; Zhang, Yang; Segebrecht Gøtje, Asger

The objective of this research is to investigate the influence of injection molding parameters on the dimensional replication of microstructure surfaces in injection molding with additively manufactured soft tooling inserts in a photopolymer material. The replication degree of micropillars...... diameter and decreases the replication degree of the pillar height. A high melt temperature increases the pillar diameter independently from the pillar height. A higher injection speed affects both pillar diameter and height negatively. In addition, the study showed a significant difference...

Consumption pattern, Attitudes and Nutrition Knowledge on Soft ...

African Journals Online (AJOL)

1Department of Food Science and Technology, Sokoine University of Agriculture, ... regular soft drinks, also in obese people and young adults (17-30 years) compared to other groups .... verify/assess their association through Pearson's.

Reducing GHG emissions while improving diet quality: exploring the potential of reduced meat, cheese and alcoholic and soft drinks consumption at specific moments during the day.

Science.gov (United States)

van de Kamp, Mirjam E; Seves, S Marije; Temme, Elisabeth H M

2018-02-20

The typical Western diet is associated with high levels of greenhouse gas (GHG) emissions and with obesity and other diet-related diseases. This study aims to determine the impact of adjustments to the current diet at specific moments of food consumption, to lower GHG emissions and improve diet quality. Food consumption in the Netherlands was assessed by two non-consecutive 24-h recalls for adults aged 19-69 years (n = 2102). GHG emission of food consumption was evaluated with the use of life cycle assessments. The population was stratified by gender and according to tertiles of dietary GHG emission. Scenarios were developed to lower GHG emissions of people in the highest tertile of dietary GHG emission; 1) reducing red and processed meat consumed during dinner by 50% and 75%, 2) replacing 50% and 100% of alcoholic and soft drinks (including fruit and vegetable juice and mineral water) by tap water, 3) replacing cheese consumed in between meals by plant-based alternatives and 4) two combinations of these scenarios. Effects on GHG emission as well as nutrient content of the diet were assessed. The mean habitual daily dietary GHG emission in the highest tertile of dietary GHG emission was 6.7 kg CO 2 -equivalents for men and 5.1 kg CO 2 -equivalents for women. The scenarios with reduced meat consumption and/or replacement of all alcoholic and soft drinks were most successful in reducing dietary GHG emissions (ranging from - 15% to - 34%) and also reduced saturated fatty acid intake and/or sugar intake. Both types of scenarios lead to reduced energy and iron intakes. Protein intake remained adequate. Reducing the consumption of red and processed meat during dinner and of soft and alcoholic drinks throughout the day leads to significantly lower dietary GHG emissions of people in the Netherlands in the highest tertile of dietary GHG emissions, while also having health benefits. For subgroups of the population not meeting energy or iron requirements as a

Reducing GHG emissions while improving diet quality: exploring the potential of reduced meat, cheese and alcoholic and soft drinks consumption at specific moments during the day

Directory of Open Access Journals (Sweden)

Mirjam E. van de Kamp

2018-02-01

Full Text Available Abstract Background The typical Western diet is associated with high levels of greenhouse gas (GHG emissions and with obesity and other diet-related diseases. This study aims to determine the impact of adjustments to the current diet at specific moments of food consumption, to lower GHG emissions and improve diet quality. Methods Food consumption in the Netherlands was assessed by two non-consecutive 24-h recalls for adults aged 19–69 years (n = 2102. GHG emission of food consumption was evaluated with the use of life cycle assessments. The population was stratified by gender and according to tertiles of dietary GHG emission. Scenarios were developed to lower GHG emissions of people in the highest tertile of dietary GHG emission; 1 reducing red and processed meat consumed during dinner by 50% and 75%, 2 replacing 50% and 100% of alcoholic and soft drinks (including fruit and vegetable juice and mineral water by tap water, 3 replacing cheese consumed in between meals by plant-based alternatives and 4 two combinations of these scenarios. Effects on GHG emission as well as nutrient content of the diet were assessed. Results The mean habitual daily dietary GHG emission in the highest tertile of dietary GHG emission was 6.7 kg CO2-equivalents for men and 5.1 kg CO2-equivalents for women. The scenarios with reduced meat consumption and/or replacement of all alcoholic and soft drinks were most successful in reducing dietary GHG emissions (ranging from − 15% to − 34% and also reduced saturated fatty acid intake and/or sugar intake. Both types of scenarios lead to reduced energy and iron intakes. Protein intake remained adequate. Conclusions Reducing the consumption of red and processed meat during dinner and of soft and alcoholic drinks throughout the day leads to significantly lower dietary GHG emissions of people in the Netherlands in the highest tertile of dietary GHG emissions, while also having health benefits. For subgroups of the

Use of NMR and NMR Prediction Software to Identify Components in Red Bull Energy Drinks

Science.gov (United States)

Simpson, Andre J.; Shirzadi, Azadeh; Burrow, Timothy E.; Dicks, Andrew P.; Lefebvre, Brent; Corrin, Tricia

2009-01-01

A laboratory experiment designed as part of an upper-level undergraduate analytical chemistry course is described. Students investigate two popular soft drinks (Red Bull Energy Drink and sugar-free Red Bull Energy Drink) by NMR spectroscopy. With assistance of modern NMR prediction software they identify and quantify major components in each…

[The effect of energy drinks on the cognitive performance of adolescents].

Science.gov (United States)

Wilhelm, P; van Diepen, M A C; Nieuwenhuis, L; Boulogne, T L A

2013-01-01

Manufacturers of energy drinks claim that their drinks can have a positive effect on cognitive performance. So far, there is little evidence that energy drinks do in fact enhance the cognitive performance of adolescents. To find out, via a series of tests, whether the manufacturers of energy drinks are justified in claiming that their drinks improve the cognitive performance of young people. In a quasi-experimental design a number of young people (aged 15-18) were divided into three groups: a control group, each of whose members drank water beforehand; a placebo group whose members drank a glass of sugar-free lemonade, and an experimental group whose members drank a currently available energy drink (Megaforce). Pencil and paper tests were administered to the members of each group in order to measure attention and concentration, learning ability, memory, verbal and numerical reasoning, numerical aptitude and vocabulary. No significant differences between groups were found that could solely be ascribed to the effect of energy drink. Given the warnings about the potential health-risks of energy drinks and the fact that no evidence was found for positive effects of energy drinks on the cognitive performance of young people, we are of the opinion that youngsters should stay away from such drinks.

Re-examination of Advertising Effectiveness in Selected Soft Drink Companies in Lagos State, Nigeria: A Descriptive Analysis

Directory of Open Access Journals (Sweden)

Adefulu Adesoga

2015-06-01

Full Text Available The paper reexamined the effectiveness of Advertising in Selected Soft Drink Companies in Lagos, Nigeria. The study linked with past researches through its extensive conceptual, theoretical and empirical literature review. The methodology adopted was survey research design. The study population was the staff in marketing positions in the selected companies. Questionnaire was administered on samples from the selected Companies. The weighted means and percentage values of the respondents were used in the analysis and decision making. The findings showed the need for a better understanding of organizational factors that determine the commitment of organizational resources to drive achievement of advertising goals because of its impacts on customers’ awareness and product adoption.. The study concluded that advertising is a potent and veritable tool for achieving marketing goals. The study recommended that firms should identify the best advertising program to achieve its advertising goals. By implication, marketing decision maker should incorporate advertising expenditures in the marketing budget in appreciation of its role.

Simultaneous determination of Sunset yellow and Tartrazine in soft drinks using gold nanoparticles carbon paste electrode.

Science.gov (United States)

Ghoreishi, Sayed Mehdi; Behpour, Mohsen; Golestaneh, Mahshid

2012-05-01

The monitoring of synthetic dyes in foods is very important due to their potential harmfulness to human beings. Herein, a carbon-paste electrode (CPE) that is chemically modified with gold nanoparticles (nAu) was fabricated and used for the determination of Sunset yellow (SY) and Tartrazine (Tz). Cyclic and differential pulse voltammetry (CV and DPV) results revealed two well-resolved anodic peaks for SY and Tz with remarkably increase in oxidation signals of these colourants. Based on this, a novel electrochemical method was developed for the simultaneous determination of SY and Tz. High sensitivity and selectivity, sub-micromolar detection limit, high reproducibility and regeneration of the electrode surface by simple polishing make the nAu-CPE electrode very suitable for the determination of SY and Tz in commercially available soft drinks. The detection limits was 3.0×10(-8) and 2.0×10(-9)moll(-1) for SY and Tz, respectively, which are remarkably lower than those reported previously for SY and Tz using other modified electrodes. Copyright © 2011 Elsevier Ltd. All rights reserved.

Consumption of fruit, vegetables, sweets and soft drinks are associated with psychological dimensions of eating behaviour in parents and their 12-year-old children.

Science.gov (United States)

Elfhag, Kristina; Tholin, Sanna; Rasmussen, Finn

2008-09-01

We investigated associations between consumption of fruits, vegetables, sweets and soft drinks and the psychological dimensions of eating in parents and their children. The role of the parent's characteristics for their children's food intake was also explored. Food intake patterns were assessed by self-reported consumption of the respective foods. Eating behaviour was measured by the Dutch Eating Behaviour Questionnaire and self-esteem by Harter self-perception scale. The participants were 1441 families (mother, father and their 12-year-old child), and additionally 354 mothers and thirty fathers. Among parents, reported intake of fruit and vegetables were associated with restrained eating, higher self-esteem, and higher education and age. Intake of sweets was related to more external and less restrained eating, and for mothers also emotional eating. Parent's intake of soft drink was foremost related to a younger age, and also weakly associated with psychological characteristics. The food intake of parents was more important for the children's food intake than any other characteristics. However, children's intake of sweets showed clear-cut positive associations with external eating. Psychological dimensions of eating behaviour are associated with patterns of food intake, in particular for consumption of sweets, and are most prominent in the parents. The children's food intake mirrored their parents' intake. Being sensitive to external food cues may increase unhealthy food consumption in our society, whereas more restrained eating may indicate proneness or intention to healthier food choices among parents. Emotional eating may imply a proneness to consume sweets for comfort, in particular among mothers.

Soft Somatosensitive Actuators via Embedded 3D Printing.

Science.gov (United States)

Truby, Ryan L; Wehner, Michael; Grosskopf, Abigail K; Vogt, Daniel M; Uzel, Sebastien G M; Wood, Robert J; Lewis, Jennifer A

2018-04-01

Humans possess manual dexterity, motor skills, and other physical abilities that rely on feedback provided by the somatosensory system. Herein, a method is reported for creating soft somatosensitive actuators (SSAs) via embedded 3D printing, which are innervated with multiple conductive features that simultaneously enable haptic, proprioceptive, and thermoceptive sensing. This novel manufacturing approach enables the seamless integration of multiple ionically conductive and fluidic features within elastomeric matrices to produce SSAs with the desired bioinspired sensing and actuation capabilities. Each printed sensor is composed of an ionically conductive gel that exhibits both long-term stability and hysteresis-free performance. As an exemplar, multiple SSAs are combined into a soft robotic gripper that provides proprioceptive and haptic feedback via embedded curvature, inflation, and contact sensors, including deep and fine touch contact sensors. The multimaterial manufacturing platform enables complex sensing motifs to be easily integrated into soft actuating systems, which is a necessary step toward closed-loop feedback control of soft robots, machines, and haptic devices. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Energy drinks and adolescents: what's the harm?

Science.gov (United States)

Harris, Jennifer L; Munsell, Christina R

2015-04-01

Concerns about potential dangers from energy drink consumption by youth have been raised by health experts, whereas energy drink manufacturers claim these products are safe and suitable for marketing to teens. This review summarizes the evidence used to support both sides of the debate. Unlike most beverage categories, sales of energy drinks and other highly caffeinated products continue to grow, and marketing is often targeted to youth under the age of 18 years. These products pose a risk of caffeine toxicity when consumed by some young people, and there is evidence of other troubling physiological and behavioral effects associated with their consumption by youth. The US Food and Drug Administration has indicated it will reexamine the safety of caffeine in the food supply; however, more research is needed to better understand youth consumption of energy drinks and caffeine in general, as well as the long-term effects on health. Meanwhile, policymakers and physician groups have called on energy drink manufacturers to take voluntary action to reduce the potential harm of their products, including placing restrictions on marketing to youth under the age of 18 years. Additional regulatory and legislative options are also being discussed. © The Author(s) 2015. Published by Oxford University Press on behalf of the International Life Sciences Institute. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

3D printing of soft-matter to open a new era of soft-matter MEMS/robotics (Conference Presentation)

Science.gov (United States)

Furukawa, Hidemitsu

2017-04-01

3D printing technology is becoming useful and applicable by the progress of information and communication technology (ICT). It means 3D printer is a kind of useful robot for additive manufacturing and is controlled by computer with human-friendly software. Once user starts to use 3D printing of soft-matter, one can immediately understand computer-aided design (CAD) and engineering (CAE) technology will be more important and applicable for soft-matter systems. User can easily design soft-matter objects and 3D-print them. User can easily apply 3D-printed soft-matter objects to develop new research and application on MEMS and robotics. Here we introduce the recent progress of 3D printing (i.e. additive manufacturing), especially focusing on our 3D gel printing. We are trying to develop new advanced research and applications of 3D gel printer, including GEL-MECHANICS, GEL-PHOTONICS, and GEL-ROBOTICS. In the gel-mechanics, we are developing new gel materials for mechanical engineering. Some gels have high-mechanical strength and shape memory properties. In the gel-photonics. We are applying our original characterizing system, named `Scanning Microscopic Light Scattering (SMILS)', to analyze 3D printed gel materials. In the gel-robotics, we focus on 3D printing of soft parts for soft-robotics made form gel materials, like gel finger. Also we are challenging to apply 3D gel printing to start new company, to innovate new businesses in county side, and to create new 3D-printed foods.

Sectoral Innovation Watch Food and Drinks Sector. Final Sector Report

NARCIS (Netherlands)

Leis, M.; Gijsbers, G.; Zee, F. van der

2011-01-01

The food and drinks manufacturing industry is a diverse and complex sector. There are ample possibilities for performance improvement and innovation in the food and drinks industry as well as a variety of challenges ranging from a lack of financial and human resources, fragmented consumer interests

Soft Active Materials for Actuation, Sensing, and Electronics

Science.gov (United States)

Kramer, Rebecca Krone

Future generations of robots, electronics, and assistive medical devices will include systems that are soft and elastically deformable, allowing them to adapt their morphology in unstructured environments. This will require soft active materials for actuation, circuitry, and sensing of deformation and contact pressure. The emerging field of soft robotics utilizes these soft active materials to mimic the inherent compliance of natural soft-bodied systems. As the elasticity of robot components increases, the challenges for functionality revert to basic questions of fabrication, materials, and design - whereas such aspects are far more developed for traditional rigid-bodied systems. This thesis will highlight preliminary materials and designs that address the need for soft actuators and sensors, as well as emerging fabrication techniques for manufacturing stretchable circuits and devices based on liquid-embedded elastomers.

Maternal chocolate and sucrose soft drink intake induces hepatic steatosis in rat offspring associated with altered lipid gene expression profile

DEFF Research Database (Denmark)

Kjærgaard, Maj; Nilsson, C.; Rosendal, A.

2014-01-01

weight gain and adiposity in offspring born to chow-fed dams. Conclusion: Our results suggest that supplementation of chocolate and soft drink during gestation and lactation contributes to early onset of hepatic steatosis associated with changes in hepatic gene expression and lipid handling....... until weaning, giving four dietary groups. Results: At postnatal day 1, offspring from high-fat/high-sucrose-fed dams were heavier and had increased hepatic triglycerides (TG), hepatic glycogen, blood glucose and plasma insulin compared with offspring from chow-fed dams. Hepatic genes involved in lipid...... oxidation, VLDL transport and insulin receptor were down-regulated, whereas FGF21 expression was up-regulated. Independent of postnatal litter size, offspring from high-fat/high-sucrose-fed dams aged 21 days had still increased hepatic TG and up-regulated FGF21 expression, while plasma insulin started...

Comparing the erosive effect of Iranian soft drinks with standard samples; A Calcium ion analysis

Directory of Open Access Journals (Sweden)

Fallahinejad Ghajari M.

2007-05-01

Full Text Available Background and Aim: Extensive and continuous consumption of acidic drinks is the main cause of enamel erosion in human teeth. The purpose of this study was to compare the erosive potential of two Iranian drinks with those of two imported ones. Materials and Methods: Two Iranian drinks (Cola Zamzam and Orange Zamzam and two imported ones (Pepsi and Miranda were studied in this experimental invitro study. 120 intact premolar teeth, extracted for orthodontic reasons were divided into 3 equal groups (A, B and C. Each group was exposed to one of the drinks for exposure times of: A: 15 minutes, B: 45 minutes and C: 12 hours. Each group was divided into 4 subgroups (each containing 10 teeth, which were exposed to 20 ml of one of the 4 drinks. The exposed surface was the same in all samples (a 5 mm in diameter semi circular window. The amount of Ca++ ion (mg/ml added to each drink at the end of exposure time was estimated by atomic absorption spectrophotometer. Results: 2 way ANOVA showed that the drinks were significantly different with regard to released Calcium ion. Time had significant effect on erosive potential. The two mentioned factors had significant interaction (P<0.001. The most erosive effect was seen in 12 hours in all of the drinks. The erosive effect of Orange Zamzam in 15 minutes and Pepsi in 45 minutes and 12 hours was significantly more than other groups (P<0.001. Conclusions: Pepsi had the most long term erosive effect among the four drinks, and Cola Zamzam had the least erosive potential.

PENINGKATAN KINERJA OHMS (ORDER HANDLING MANUFACTURING SYSTEM) MELALUI SOFT SYSTEMS METHODOLOGY (SSM)

OpenAIRE

Slamet Budiarto

2011-01-01

Dalam penelitian ini, untuk meningkatkan kinerja OHMS yang karakteristiknya lebih kompleks, digunakan soft systems methodology yang banyak membantu para manajer untuk menyelesaikan masalah yang bervariasi dan kompleks. Permasalahan tersebut sering menemui kegagalan dalam penyelesaiannya ketika pendekatan system engineering (SE) digunakan. Penelitian menunjukan gambaran aktivitas lebih jelas, dan penentuan indikator lebih terstruktur dengan mengkombinasikan IDEF0. Melalui soft systems met...

Soft pneumatic grippers embedded with stretchable electroadhesion

Science.gov (United States)

Guo, J.; Elgeneidy, K.; Xiang, C.; Lohse, N.; Justham, L.; Rossiter, J.

2018-05-01

Current soft pneumatic grippers cannot robustly grasp flat materials and flexible objects on curved surfaces without distorting them. Current electroadhesive grippers, on the other hand, are difficult to actively deform to complex shapes to pick up free-form surfaces or objects. An easy-to-implement PneuEA gripper is proposed by the integration of an electroadhesive gripper and a two-fingered soft pneumatic gripper. The electroadhesive gripper was fabricated by segmenting a soft conductive silicon sheet into a two-part electrode design and embedding it in a soft dielectric elastomer. The two-fingered soft pneumatic gripper was manufactured using a standard soft lithography approach. This novel integration has combined the benefits of both the electroadhesive and soft pneumatic grippers. As a result, the proposed PneuEA gripper was not only able to pick-and-place flat and flexible materials such as a porous cloth but also delicate objects such as a light bulb. By combining two soft touch sensors with the electroadhesive, an intelligent and shape-adaptive PneuEA material handling system has been developed. This work is expected to widen the applications of both soft gripper and electroadhesion technologies.

Determination of Phthalates in Drinking Water Samples

African Journals Online (AJOL)

user

successfully applied to the analysis of phthalate esters contamination in bottled drinking water samples. ... esters are used in the manufacturing of polyvinyl chloride. (PVC). ... water, soil, air, food products and the human body. (Castillo et al.

Determination of synthetic phenolic antioxidants in soft drinks by stir-bar sorptive extraction coupled to gas chromatography-mass spectrometry.

Science.gov (United States)

Cacho, Juan Ignacio; Campillo, Natalia; Viñas, Pilar; Hernández-Córdoba, Manuel

2015-01-01

The synthetic phenolic antioxidants butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT) and tert-butyl hydroquinone (TBHQ) were pre-concentrated by stir-bar sorptive extraction and thermally desorbed (SBSE-TD) before analysis by GC-MS. Several parameters affecting the derivatisation step and both SBSE extraction and thermal desorption were carefully optimised. When the analyses of BHA and TBHQ in their acetylated, silylated and underivatised forms were compared, the best results were obtained when the in-situ derivatisation procedure with acetic anhydride was employed. Quantification was carried out using carvacrol as the internal standard, providing quantification limits of between 0.11 and 0.15 ng ml(-1), depending on the compound. Recovery assays for samples spiked at two concentration levels, 1 and 5 ng ml(-1), provided recoveries in the 81-117% range. The proposed method was applied in the analysis canned soft drinks and the analytes were found in five of the 10 samples analysed.

Soft Robotics: from scientific challenges to technological applications

Science.gov (United States)

Laschi, C.

2016-05-01

Soft robotics is a recent and rapidly growing field of research, which aims at unveiling the principles for building robots that include soft materials and compliance in the interaction with the environment, so as to exploit so-called embodied intelligence and negotiate natural environment more effectively. Using soft materials for building robots poses new technological challenges: the technologies for actuating soft materials, for embedding sensors into soft robot parts, for controlling soft robots are among the main ones. This is stimulating research in many disciplines and many countries, such that a wide community is gathering around initiatives like the IEEE TAS TC on Soft Robotics and the RoboSoft CA - A Coordination Action for Soft Robotics, funded by the European Commission. Though still in its early stages of development, soft robotics is finding its way in a variety of applications, where safe contact is a main issue, in the biomedical field, as well as in exploration tasks and in the manufacturing industry. And though the development of the enabling technologies is still a priority, a fruitful loop is growing between basic research and application-oriented research in soft robotics.

Taking the sweetness out of the 'Share a Coke' marketing campaign: the influence of personalized labelling on elementary school children's bottled drink choices.

Science.gov (United States)

McDarby, F; O'Hora, D; O'Shea, D; Byrne, M

2018-01-01

Drink personalization (featuring names on bottle labels) has been used by soft drink companies to make their drinks attractive to children, potentially increasing consumption. To date, no publically available research has evaluated the influence of personalization on children's drink choices. To determine (i) whether personalizing bottled drinks influences children's drink choices; (ii) whether it is comparably effective in promoting healthy and unhealthy drinks and (iii) whether drink choices are affected by self-esteem, body mass index and parental factors. Children aged 8-13 years (N = 404) were randomly assigned to one of three drink labeling conditions: Prime Healthy, Prime Unhealthy and Control. All participants selected one beverage from 12 options, comprising six healthy and unhealthy drinks. Personalizing healthy drinks increased choice of healthy drinks (OR, 2.21; 95% CI, 1.24-4.00), and personalizing unhealthy drinks reduced choice of healthy drinks (OR, 0.35; 95% CI, 0.15-.0.75). Higher self-esteem predicted choosing own-named drinks (OR = 1.08, 95% CI, 1.00-1.18; p = .049). Children's drink choices are influenced by personalizing drink bottles. Tighter regulation of this marketing strategy for soft drinks may reduce children choice of these drinks. Personalization may also be used to encourage children to choose healthy drinks. © 2016 World Obesity Federation.

Accelerated testing for cosmic soft-error rate

International Nuclear Information System (INIS)

Ziegler, J.F.; Muhlfeld, H.P.; Montrose, C.J.; Curtis, H.W.; O'Gorman, T.J.; Ross, J.M.

1996-01-01

This paper describes the experimental techniques which have been developed at IBM to determine the sensitivity of electronic circuits to cosmic rays at sea level. It relates IBM circuit design and modeling, chip manufacture with process variations, and chip testing for SER sensitivity. This vertical integration from design to final test and with feedback to design allows a complete picture of LSI sensitivity to cosmic rays. Since advanced computers are designed with LSI chips long before the chips have been fabricated, and the system architecture is fully formed before the first chips are functional, it is essential to establish the chip reliability as early as possible. This paper establishes techniques to test chips that are only partly functional (e.g., only 1Mb of a 16Mb memory may be working) and can establish chip soft-error upset rates before final chip manufacturing begins. Simple relationships derived from measurement of more than 80 different chips manufactured over 20 years allow total cosmic soft-error rate (SER) to be estimated after only limited testing. Comparisons between these accelerated test results and similar tests determined by ''field testing'' (which may require a year or more of testing after manufacturing begins) show that the experimental techniques are accurate to a factor of 2

Quality of drinking dater and its products

International Nuclear Information System (INIS)

Ihsanullah; Khan, M.; Qureshi, M.J.; Khattak, T.N.; Chaudry, M.A.

2005-01-01

Various types of soft drinks including water are available in local markets. Different brands of mineral water and packed squashes/milk were collected from local markets in order to check and confirm their quality. Determination of some physical indices (pH, electrical conductivity, total Solids) and pathogenic bacteria (E. coli and total coliforms) was carried out in these samples for assessment of their effects on human health. The results obtained were compared with the labelled values as well as to WHO recommended levels. As a part of public education towards water problems, some remedial actions are recommended for quality control treatment of drinking water supplies. (author)

High thermal conductivity in soft elastomers with elongated liquid metal inclusions

OpenAIRE

Bartlett, Michael D.; Kazem, Navid; Powell-Palm, Matthew J.; Huang, Xiaonan; Sun, Wenhuan; Malen, Jonathan A.; Majidi, Carmel

2017-01-01

Efficient thermal transport is critical for applications ranging from electronics and energy to advanced manufacturing and transportation; it is essential in emerging domains like wearable computing and soft robotics, which require thermally conductive materials that are also soft and stretchable. However, heat transport within soft materials is limited by the dynamics of phonon transport, which results in a trade-off between thermal conductivity and compliance. We overcome this by engineerin...

Energy drink consumption and impact on caffeine risk.

Science.gov (United States)

Thomson, Barbara M; Campbell, Donald M; Cressey, Peter; Egan, Ursula; Horn, Beverley

2014-01-01

The impact of caffeine from energy drinks occurs against a background exposure from naturally occurring caffeine (coffee, tea, cocoa and foods containing these ingredients) and caffeinated beverages (kola-type soft drinks). Background caffeine exposure, excluding energy drinks, was assessed for six New Zealand population groups aged 15 years and over (n = 4503) by combining concentration data for 53 caffeine-containing foods with consumption information from the 2008/09 New Zealand Adult Nutrition Survey (ANS). Caffeine exposure for those who consumed energy drinks (n = 138) was similarly assessed, with inclusion of energy drinks. Forty-seven energy drink products were identified on the New Zealand market in 2010. Product volumes ranged from 30 to 600 ml per unit, resulting in exposures of 10-300 mg caffeine per retail unit consumed. A small percentage, 3.1%, of New Zealanders reported consuming energy drinks, with most energy drink consumers (110/138) drinking one serving per 24 h. The maximum number of energy drinks consumed per 24 h was 14 (total caffeine of 390 mg). A high degree of brand loyalty was evident. Since only a minor proportion of New Zealanders reported consuming energy drinks, a greater number of New Zealanders exceeded a potentially adverse effect level (AEL) of 3 mg kg(-1) bw day(-1) for caffeine from caffeine-containing foods than from energy drinks. Energy drink consumption is not a risk at a population level because of the low prevalence of consumption. At an individual level, however, teenagers, adults (20-64 years) and females (16-44 years) were more likely to exceed the AEL by consuming energy drinks in combination with caffeine-containing foods.

The Prevalence of Tobacco, Hubble-Bubble, Alcoholic Drinks, Drugs, and Stimulants among High-School Students

Directory of Open Access Journals (Sweden)

Roghayeh Alaee

2011-08-01

Full Text Available Introduction: The purpose of the present study was to investigate the prevalence of tobacco, hubble-bubble, alcoholic drinks, and other drugs among Karaj high-school students in 2011. Methods: The research method was a descriptive-sectional study. Participants of this study were 447 girl and boy high-school students of Karaj that were selected by clustering random sampling. For data gathering, drug abuse questionnaire, and risk and protective factors inventory were administered among selected sample. Results: According to the results, 57% of students in this study said that they have had experiences with a kind of drug including tobacco, hubble-bubble, alcoholic drinks, and other drugs at least once in their lives. The study showed the prevalence for soft drugs: hubble-bubble, tobacco, and alcoholic drinks, and for hard drugs ecstasy, opium, hashish, meth, crack, and heroin respectively. Conclusion: Soft drugs including hubble-bubble, tobacco, and alcoholic drinks, are the most common among Karaj high-school students. The prevalence of hard drugs among them is rather low.

Consumo de bebidas e refrigerantes por adolescentes de uma escola pública Consumo de bebidas y refrescos en adolescentes de una escuela pública Beverage and soft drink consumption by adolescents from a public school

Directory of Open Access Journals (Sweden)

Camilla Chermont P. Estima

2011-03-01

escuela (22,1%. El principal factor señalado para el consumo de refrescos fue el sabor (75,4%. CONCLUSIONES: El consumo de bebidas con azúcar, especialmente los refrescos, fue frecuente entre adolescentes. Esas bebidas son disponibles y consumidas tanto en casa como en la escuela y son consideradas sabrosas. Los programas de educación nutricional deben pensar en cómo priorizar el consumo de otras bebidas, además de controlar la comercialización de esos productos en las escuelas, con el objetivo de estimular el consumo de bebidas más sanas para esa franja de edad.OBJECTIVE: To evaluate the consumption of beverage and soft drinks by adolescents of a public school in São Paulo, Brazil. METHODS: 71 adolescents (aged between 14 to 17 years old from both genders, attending a technical school in the metropolitan area of São Paulo, answered the following questions: the kind of beverage taken during meals, the places where soft drinks were consumed and the main reason related to this intake. RESULTS: The most frequent consumed beverage was the industrialized fruit juice (38.1%, followed by regular soft drinks (28.6% and natural fruit juices (22.2%. The main place where soft drinks were consumed was home (38.2%, followed by school (22.1%. The main reason associated with soft drink intake was the flavor (75.4%. CONCLUSIONS: Sweet beverage intake was frequent among adolescents, specially soft drinks. These beverages are available and consumed at home and at school, and they were considered tasteful. Nutritional education programs should discuss how to prioritize the intake of other beverages and how to control the sale of these products at schools, aiming to stimulate the intake of more healthy beverages by adolescents.

Energy drink consumption and the perceived risk and disapproval of drugs: Monitoring the Future, 2010-2016.

Science.gov (United States)

Jackson, Dylan B; Leal, Wanda E

2018-07-01

Energy drinks have become quite popular in recent years among adolescents, prompting a wealth of recent research examining the potential deleterious consequences of energy drink consumption among youth. The present study adds to this body of work by exploring perceptions of risk and disapproval of soft and hard drugs among adolescents and whether such attitudes are predicted by patterns of energy drink/shot consumption. Data were derived from the seven most recent cohorts (2010-2016) of the Monitoring the Future (MTF) study, a nationally representative survey of U.S. youth. The significance of associations between energy drink/shot consumption and drug perceptions/attitudes was tested using logistic regression techniques employing adjustments for covariates and cohort-specific fixed effects. Energy drink/shot consumption was largely associated with significant increases in the odds of failing to perceive any risk of drug use and failing to disapprove of drug use among youths, regardless of whether attitudes concerning soft or hard drugs were examined. These associations were particularly robust in the case of habitual energy drink/shot consumers (relative to occasional consumers or abstainers). Additional efforts should be made to heighten awareness and education concerning the potential dangers of energy drink consumption among youth, particularly as it pertains to drug attitudes and diminished perceptions of substance use risk. Policies that minimize energy drink consumption among youth as well as programs that educate parents and teachers about the drug attitudes of youths who regularly consume energy drinks and promote active monitoring of these adolescents may be worthwhile. Copyright © 2018 Elsevier B.V. All rights reserved.

Evaluation of drinks contribution to energy intake in summer and winter.

Science.gov (United States)

Malisova, Olga; Bountziouka, Vassiliki; Zampelas, Antonis; Kapsokefalou, Maria

2015-05-15

All drinks hydrate and most also provide nutrients and energy. Our objective was to evaluate the contribution of drinks to total energy intake in summer and winter. Data were obtained using the Water Balance Questionnaire (WBQ) from a sample of the general population in Athens, Greece (n = 984), 473 individuals (42 ± 18 years) in summer and 511 individuals (38 ± 20 years) in winter stratified by sex and age. The WBQ embeds a semi-quantitative food frequency questionnaire of 58 foods and the Short International Physical Activity Questionnaire. Data were analyzed for the contribution of drinks to total energy intake. In winter, total energy intake was 2082 ± 892 kcal/day; energy intake from drinks was 479 ± 286 kcal/day and energy expenditure 1860 ± 390 kcal/day. In summer, total energy intake was 1890 ± 894 kcal/day, energy intake from drinks 492 ± 499 kcal/day and energy expenditure 1830 ± 491 kcal/day. Energy intake from drinks in summer was higher than in winter (p drinks, milk, chocolate milk and alcoholic drinks contributed approximately 75% of energy from drinks. Fruit juice and sugar-sweetened drinks, including soft drinks and fruit juice based drinks, were consumed less frequently contributing up to 25% of drink energy intake. Drinks contribute approximately 1/4 of total energy intake depending on the energy content of the drink and frequency of consumption. Coffee, dairy and alcoholic drinks were the main energy contributors.

Manufacturing of Liquid-Embedded Elastomers for Stretchable Electronics

Science.gov (United States)

Kramer, Rebecca; Majidi, Carmel; Weaver, James; Wood, Robert

2013-03-01

Future generations of robots, electronics, and assistive medical devices will include systems that are soft, elastically deformable, and may adapt their functionality in unstructured environments. This will require soft active materials for power circuits and sensing of deformation and contact pressure. As the demand for increased elasticity of electrical components heightens, the challenges for functionality revert to basic questions of fabrication, materials, and design. Several designs for soft sensory skins (including strain, pressure and curvature sensors) based on a liquid-embedded-elastomer approach have been developed. This talk will highlight new ``soft MEMS'' manufacturing techniques based on wetting behavior between gallium-indium alloys and elastomers with varying microtextured surface topography. Supported by Harvard MRSEC and the Wyss Institute

Knowledge, attitudes and practices toward energy drinks among adolescents in Saudi Arabia.

Science.gov (United States)

Musaiger, Abdulrahman; Zagzoog, Nisreen

2013-11-27

The objective of this study is to explore the knowledge, attitudes and intake of energy drinks among adolescents in Saudi Arabia. A multi-stage stratified sampling procedure was carried out to select 1061 school children aged 12-19 years, from Jeddah city, Saudi Arabia. A short self-reported questionnaire was administrated in order to collect the data. Of adolescents in the study, 45% drank energy drinks (71.3% males and 35.9% females; Penergy drinks (43%). The major reasons for consuming energy drinks were taste and flavour (58%), to 'try them' (51.9%) and 'to get energy' (43%), albeit with significant differences between genders (Pdrinks, and 49% did not know that they contain caffeine (P-values energy drinks to be soft drinks. The study indicates the need for Saudi adolescents to be warned on the over-consumption of energy drinks. The study brings to attention the need for educational programmes related to increasing awareness in the community of the health effects related to high consumption of energy drinks.

The National Si-Soft Project

International Nuclear Information System (INIS)

Chang, C.-Y.; Trappey, Charles V.

2003-01-01

Taiwan's electronics industry emerged in the 1960s with the creation of a small but well planned integrated circuit (IC) packaging industry. This industry investment led to bolder investments in research, laboratories, and the island's first semiconductor foundries in the 1980s. Following the success of the emerging IC manufacturers and design houses, hundreds of service firms and related industries (software, legal services, substrate, chemical, and test firms among others) opened for business and completed Taiwan's IC manufacturing supply chain. The challenge for Taiwan's electronics industry is to take the lead in the design, manufacture, and marketing of name brand electronic products. This paper introduces the Si-Soft (silicon software) Project, a national initiative that builds on Taiwan's achievements in manufacturing (referred to as Si-Hard or silicon hardware) to launch a new wave of companies. These firms will contribute to the core underlying technology (intellectual property) used in the creation of electronic products

Designing an Energy Drink: High School Students Learn Design and Marketing Skills in This Activity

Science.gov (United States)

Martin, Doug

2008-01-01

A decade ago, energy drinks were almost nonexistent in the United States, but in the past five years they've become wildly popular. In fact, the $3.4 billion energy-drink market is expected to double this year alone, and the younger generation is the market targeted by manufacturers. This article presents an energy-drink designing activity. This…

Orange-flavored soft drink with the addition of isolated whey protein

Directory of Open Access Journals (Sweden)

Mirian Souza Prado

2015-08-01

Full Text Available Current assay developed an orange-flavored soda pop with the addition of isolated whey protein, bottled in a 2L-polyethylene terephthalate container and stored at room temperature for 90 days. Physical, chemical, microbiological and sensorial analyses were conducted periodically on the product. The physicochemical analysis showed pH 3.53, 11.5ºBrix and 224 mg of citric acid per 100 mL of the drink and the following proximal composition: protein 0.501%, humidity 88.9%, ash 0.084% and carbohydrates 10.5%. Microbiological analyses detected no microorganisms during the storage period of the drink. Sensorial analysis results had good acceptability. Results showed that the product is stable when stored at room temperature for 90 days. This beverage contains higher nutritional rates and the same calorie rates when compared to sodas and some oranges juices found on the consumer market.

Caloric beverage drinking patterns are differentially associated with diet quality and adiposity among Spanish girls and boys.

Science.gov (United States)

Schröder, Helmut; Mendez, Michelle A; Ribas, Lourdes; Funtikova, Anna N; Gomez, Santiago F; Fíto, Montserrat; Aranceta, Javier; Serra-Majem, Lluis

2014-09-01

The present study assesses the impact of beverage consumption pattern on diet quality and anthropometric proxy measures for abdominal adiposity in Spanish adolescents. Data were obtained from a representative national sample of 1,149 Spanish adolescents aged 10-18 years. Height, weight, and waist circumferences were measured. Dietary assessment was performed with a 24-h recall. Beverage patterns were identified by cluster analysis. Adherence to the Mediterranean diet was measured by the KIDMED index. Three beverage clusters were identified for boys--"whole milk" (62.5 %), "low-fat milk" (17.5 %) and "soft drinks" (20.1 %)-and for girls--"whole milk" (57.8 %), "low-fat milk" (20.8 %) and juice (21.4 %), accounting for 8.3, 9.6, 13.9, 8.6, 11.5 and 12.9 % of total energy intake, respectively. Each unit of increase in the KIDMED index was associated with a 14.0 % higher (p = 0.004) and 11.0 % lower (p = 0.048) probability of membership in the "low-fat milk" and "soft drinks" cluster in girls and boys, respectively, compared with the "whole milk" cluster. Boys in the "soft drinks" cluster had a higher risk of 1-unit increase in BMI z score (29.0 %, p = 0.040), 1-cm increase in waist circumference regressed on height and age (3.0 %, p = 0.027) and 0.1-unit increase in waist/height ratio (21.4 %, p = 0.031) compared with the "whole milk" cluster. A caloric beverage pattern dominated by intake of "soft drinks" is related to general and abdominal adiposity and diet quality in Spanish male adolescents.

Metrology for Fuel Cell Manufacturing

Energy Technology Data Exchange (ETDEWEB)

Stocker, Michael [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Stanfield, Eric [National Inst. of Standards and Technology, Gaithersburg, MD (United States)

2015-02-04

The project was divided into three subprojects. The first subproject is Fuel Cell Manufacturing Variability and Its Impact on Performance. The objective was to determine if flow field channel dimensional variability has an impact on fuel cell performance. The second subproject is Non-contact Sensor Evaluation for Bipolar Plate Manufacturing Process Control and Smart Assembly of Fuel Cell Stacks. The objective was to enable cost reduction in the manufacture of fuel cell plates by providing a rapid non-contact measurement system for in-line process control. The third subproject is Optical Scatterfield Metrology for Online Catalyst Coating Inspection of PEM Soft Goods. The objective was to evaluate the suitability of Optical Scatterfield Microscopy as a viable measurement tool for in situ process control of catalyst coatings.

a markovian study of manpow an study of manpower planning

African Journals Online (AJOL)

eobe

The Markovian method of manpower planning foretell the future. ... ive years from a soft drink manufacturing company based in Lagos, Nigeria company based ... ces management approach. ... handbook have also used Markov processes for.

Detection of caffeine in tea, instant coffee, green tea beverage, and soft drink by direct analysis in real time (DART) source coupled to single-quadrupole mass spectrometry.

Science.gov (United States)

Wang, Lei; Zhao, Pengyue; Zhang, Fengzu; Bai, Aijuan; Pan, Canping

2013-01-01

Ambient ionization direct analysis in real time (DART) coupled to single-quadrupole MS (DART-MS) was evaluated for rapid detection of caffeine in commercial samples without chromatographic separation or sample preparation. Four commercial samples were examined: tea, instant coffee, green tea beverage, and soft drink. The response-related parameters were optimized for the DART temperature and MS fragmentor. Under optimal conditions, the molecular ion (M+H)+ was the major ion for identification of caffeine. The results showed that DART-MS is a promising tool for the quick analysis of important marker molecules in commercial samples. Furthermore, this system has demonstrated significant potential for high sample throughput and real-time analysis.

Antibacterial and Antiadhesive Activities of Extracts from Edible Plants against Soft Drink Spoilage by Asaia spp.

Science.gov (United States)

Antolak, Hubert; Czyzowska, Agata; Kregiel, Dorota

2017-01-01

This study was conducted to investigate the antibacterial and antiadhesive activities of ethanol extracts from five edible plant parts: cinnamon bark ( Cinnamomum zeylanicum ), licorice root ( Glycyrrhiza radix ), nettle leaves ( Urtica dioica ), green tea leaves ( Camellia sinensis ), and elderberry flowers ( Sambucus nigra ). The chemical constituents of the extracts were identified using high-performance liquid chromatography and liquid chromatography plus mass spectrometry. Six strains of Asaia lannensis and Asaia bogorensis bacteria isolated from spoiled commercial fruit-flavored noncarbonated mineral water were used. Bacterial adhesion to polystyrene as an attachment substrate in culture media supplemented with 10% plant extract was evaluated using luminometric measurement of the ATP extracted from adhered cells. The viability of the adhered and planktonic cells was assessed using the plate count method, and the relative adhesion coefficient was calculated. All tested crude extracts contained flavonols (kaempferol, quercetin, and their derivatives), flavanols (catechin and derivatives), flavanones (glabrol, licorice glycoside A, and liquiritin), and phenolic acids (gallic, quinic, chlorogenic, neochlorogenic, caffeic, coumaric, and ferulic). The culture medium with 10% elderberry extract provided the least favorable environment for all tested bacterial strains. Extracts from green tea, cinnamon, and licorice also had significant inhibitory effects on the adhesion of the tested bacterial strains. This research suggests that the addition of selected edible plant extracts could improve the microbial stability of noncarbonated soft drinks.

Continuous fermentative hydrogen production from coffee drink manufacturing wastewater by applying UASB reactor

Energy Technology Data Exchange (ETDEWEB)

Jung, Kyung-Won; Shin, Hang-Sik [Department of Civil and Environmental Engineering, KAIST, 373-1 Guseong-dong, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Kim, Dong-Hoon [Department of Civil and Environmental Engineering, University of Windsor, 401 Sunset Ave., Essex Hall, Windsor, Ontario (Canada)

2010-12-15

The feasibility of continuous H{sub 2} production from coffee drink manufacturing wastewater (CDMW) was tested in two different types of reactors: a completely-stirred tank reactor (CSTR) and an up-flow anaerobic sludge blanket reactor (UASBr). While the performance in CSTR was limited, it was significantly enhanced in UASBr. The maximum H{sub 2} yield of 1.29 mol H{sub 2}/mol hexose{sub added} was achieved at HRT of 6 h in UASBr operation. Non-hydrogenic, lactic acid was the dominant in CSTR, while butyric and caproic acids in UASBr. As caproic acid is generated by consuming acetic and butyric acids, all of which are related to H{sub 2} production, the presence of caproic acid in the broth also indicates H{sub 2} production, yielding 1.33 mol H{sub 2}/glucose. It was speculated that the enhanced performance in UASBr was attributed to the high concentration of biomass over 60,000 mg VSS/L in the blanket zone, which provided insufficient substrate for indigenous lactic acid bacteria (LAB) to survive. The abundance of LAB in CDMW was confirmed by natural fermentation of CDMW. That is without the addition of external inoculum, CDMW was mainly fermented into lactic acid under mesophilic condition. For the first time ever, H{sub 2} producing granules (HPG) with diameters of 2.1 mm were successfully formed by using actual waste as a substrate. (author)

Evaluation of some heavy metal contaminants in biscuits, fruit drinks ...

African Journals Online (AJOL)

Evaluation of some heavy metal contaminants in biscuits, fruit drinks, concentrates, ... effect in human due to continual consumption of food contaminated with heavy metals gotten from raw materials, manufacturing and packaging processes.

The effects of a priming dose of alcohol and drinking environment on snack food intake.

Science.gov (United States)

Rose, A K; Hardman, C A; Christiansen, P

2015-12-01

Alcohol consumption is a potential risk factor for being overweight. We aimed to investigate the effects of an alcohol priming dose and an alcohol-related environment on snacking behaviour. One hundred and fourteen social drinkers completed one of four experimental sessions either receiving a priming dose of alcohol (.6 g/kg) or soft drink in a bar-lab or a sterile lab. Participants provided ratings of appetite, snack urge, and alcohol urge before and after consuming their drinks. Participants completed an ad libitum snack taste test of savoury and sweet, healthy and unhealthy foods before completing the self-reports a final time. Appetite and snack urge increased more following alcohol consumption, and decreased to a lesser extent following the taste test relative to the soft drink. Total calories (including drink calories) consumed were significantly higher in the alcohol groups. There was a marginal effect of environment; those in the bar-lab consumed a higher proportion of unhealthy foods. These effects were more pronounced in those who were disinhibited. While alcohol may not increase food consumption per se, alcohol may acutely disrupt appetite signals, perhaps via processes of reward and inhibitory control, resulting in overall greater calorie intake. Individuals who are generally disinhibited may be more vulnerable to the effects of alcohol and drinking environments on eating behaviour. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Quatro-Based 65-nm Flip-Flop Circuit for Soft-Error Resilience

Science.gov (United States)

Li, Y.-Q.; Wang, H.-B.; Liu, R.; Chen, L.; Nofal, I.; Shi, S.-T.; He, A.-L.; Guo, G.; Baeg, S. H.; Wen, S.-J.; Wong, R.; Chen, M.; Wu, Q.

2017-06-01

A flip-flop circuit hardened against soft errors is presented in this paper. This design is an improved version of Quatro for further enhanced soft-error resilience by integrating the guard-gate technique. The proposed design, as well as reference Quatro and regular flip-flops, was implemented and manufactured in a 65-nm CMOS bulk technology. Experimental characterization results of their alpha and heavy ions soft-error rates verified the superior hardening performance of the proposed design over the other two circuits.

Naphthalene: Drinking water health advisory

Energy Technology Data Exchange (ETDEWEB)

1990-03-01

The Drinking Water Health Advisory, Office of Water, U.S. Environmental Protection Agency, has issued its report on the chemical, naphthalene. Naphthalene is used in the manufacture of phthalic and anthranilic acids and other derivatives, and in making dyes; in the manufacture of resins, celluloid, lampblack and smokeless gunpowder; and as moth repellant, insecticide, anthelmintic, vermicide, and intestinal antiseptic. The report covers the following areas: the occurrence of the chemical in the environment; its environmental fate; the chemical's absorption, distribution, metabolism, and excretion in the human body; and its health effects on humans and animals, including its mutagenicity and carcinogenicity characteristics. Also included is the quantification of its toxicological effects.

Voltammetric sensor for tartrazine determination in soft drinks using poly (p-aminobenzenesulfonic acid/zinc oxide nanoparticles in carbon paste electrode

Directory of Open Access Journals (Sweden)

Ghasem Karim-Nezhad

2017-04-01

Full Text Available Zinc oxide nanoparticles (ZnO NPs and p-aminobenzenesulfonic acid (p-ABSA were used to fabricate a modified electrode, as a highly sensitive and selective voltammetric sensor, for the determination of tartrazine. A fast and easy method for the fabrication of poly p-ABSA (Pp-ABSA/ZnO NPs-carbon paste electrode (Pp-ABSA/ZnO NPs-CPE by cyclic voltammetry was used. By combining the benefits of Pp-ABSA, ZnO NPs, and CPE, the resulted modified electrode exhibited outstanding electrocatalytic activity in terms of tartrazine oxidation by giving much higher peak currents than those obtained for the unmodified CPE and also other constructed electrodes. The effects of various experimental parameters on the voltammetric response of tartrazine were investigated. At the optimum conditions, the sensor has a linear response in the concentration range of 0349–5.44 μM, a good detection sensitivity (2.2034 μA/μM, and a detection limit of 80 nM of tartrazine. The proposed electrode was used for the determination of tartrazine in soft drinks with satisfactory results.

An Assessment for Soft Drink Consumption of Individuals in Centre Town of Ankara Province

OpenAIRE

Bilge Gözener; Murat Sayılı

2015-01-01

In this study, the Central district of Ankara (Çankaya, Etimesgut, Gölbaşı, Keçiören, Mamak, Polatlı, Sincan and Yenimahalle districts) carbonated drink consumption situation of consumers were examined. The data obtained from questionnaires conducted with 272 families were used in this study. Data were collected in April-May 2012.Between carbonated drink consumption and some demographic characteristics of consumers were tested by chi-square analysis of whether a statistical association. Accor...

Energy drinks: Getting wings but at what health cost?

Science.gov (United States)

Ibrahim, Nahla Khamis; Iftikhar, Rahila

2014-01-01

Energy drink consumption represents a global public health problem, especially among adolescents and young adults. The consumption of energy drinks has seen a substantial increase during the past few decades, especially in the Western and Asian countries. Although manufacturers of energy drinks claim that these beverages are beneficial in that they can boost energy, physical performance, and improve cognitive performance, there is insufficient scientific evidence to support these claims. The known and unknown pharmacology of the constituents of energy drinks, supplemented with reports of toxicity, raise concern for the potentially severe adverse events linked with energy drink use. Limited numbers of reviews have been published on this important subject..The aim of this review was to identify the major ingredients in energy drinks and to delineate the adverse effects related to their consumption. Electronic databases of PubMed, Clinical Key, and Google and Cochrane library were extensively searched for energy drink articles. More than hundred articles were reviewed, scrutinized and critically appraised and the most relevant forty articles were used Conclusion: Energy drinks & its ingredients are potentially dangerous to many aspects of health. Measures should be taken to improve awareness among adolescents and their parents regarding the potential hazards of energy drinks. Furthermore, the sale of energy drinks on college and university campuses and to adolescents below 16 years should be prohibited.

Comparison of conventional Injection Mould Inserts to Additively Manufactured Inserts using Life Cycle Assessment

DEFF Research Database (Denmark)

Hofstätter, Thomas; Bey, Niki; Mischkot, Michael

2016-01-01

Polymer Additive Manufacturing can be used to produce soft tooling inserts for injection moulding. Compared to conventional tooling, the energy and time consumption during production are significantly lower. As the life time of such inserts is significantly shorter than the life time of traditional...... of their potential environmental impact and yield throughout the development and pilot phase. Insert geometry is particularly advantageous for pilot production and small production sizes. In this research, Life Cycle Assessment is used to compare the environmental impact of soft tooling by Additive Manufacturing...... (using Digital Light Processing) and three traditional methods for the manufacture of inserts (milling of brass, steel, and aluminium) for injection moulds during the pre-production phase....

Technology for Manufacturing Efficiency

Science.gov (United States)

1995-01-01

The Ground Processing Scheduling System (GPSS) was developed by Ames Research Center, Kennedy Space Center and divisions of the Lockheed Company to maintain the scheduling for preparing a Space Shuttle Orbiter for a mission. Red Pepper Software Company, now part of PeopleSoft, Inc., commercialized the software as their ResponseAgent product line. The software enables users to monitor manufacturing variables, report issues and develop solutions to existing problems.

Hybrid 3D Printing of Soft Electronics.

Science.gov (United States)

Valentine, Alexander D; Busbee, Travis A; Boley, John William; Raney, Jordan R; Chortos, Alex; Kotikian, Arda; Berrigan, John Daniel; Durstock, Michael F; Lewis, Jennifer A

2017-10-01

Hybrid 3D printing is a new method for producing soft electronics that combines direct ink writing of conductive and dielectric elastomeric materials with automated pick-and-place of surface mount electronic components within an integrated additive manufacturing platform. Using this approach, insulating matrix and conductive electrode inks are directly printed in specific layouts. Passive and active electrical components are then integrated to produce the desired electronic circuitry by using an empty nozzle (in vacuum-on mode) to pick up individual components, place them onto the substrate, and then deposit them (in vacuum-off mode) in the desired location. The components are then interconnected via printed conductive traces to yield soft electronic devices that may find potential application in wearable electronics, soft robotics, and biomedical devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Simultaneous identification/determination system for phentolamine and sildenafil as adulterants in soft drinks advertising roborant nutrition.

Science.gov (United States)

Mikami, Eiichi; Ohno, Tsutomu; Matsumoto, Hiroshi

2002-12-04

An easily available, simultaneous identification/determination procedure for phentolamine (PHE) and sildenafil (SIL) in adulterated dietary supplements was established by using a combination of three different analytical methods; thin-layer chromatography (TLC), liquid chromatography-mass spectrometry (LC/MS) and a high-performance liquid chromatography (HPLC)/photo-diode-array. The sample solution for TLC was applied to silica gel 60 F(254) plates with chloroform/ammonia solution (28)/methanol (70:5:3, lower layer) and chloroform/diethylamine/methanol (15:3:2) as the developing solvent. Spots were located under UV radiation at 254 nm. Mass spectra of PHE and SIL by LC/MS were investigated with electrospray ionization (ESI) interface, under both positive and negative ion mode. The HPLC analysis was performed on a column of Wakosil 5C18 (4.6 mm x 150 mm, 5 microm) with water/methanol/acetonitrile/triethylamine (580:250:170:1) adjusted with phosphoric acid to pH 3.0 as the mobile phase, and the effluent was monitored with a photo-diode-array detector. Quantitative HPLC analysis of PHE and SIL were detected at 280 nm. When this procedure was applied to commercial soft drinks, PHE and SIL were identified and determined at a concentration of 17 mg PHE and 44 mg SIL per bottle, respectively. The procedure described here is available for the screening of PHE and SIL in adulterated supplements. Copyright 2002 Elsevier Science Ireland Ltd.

Effects of fluoride and epigallocatechin gallate on soft-drink-induced dental erosion of enamel and root dentin.

Science.gov (United States)

Wang, Yin-Lin; Chang, Hao-Hueng; Chiang, Yu-Chih; Lu, Yu-Chen; Lin, Chun-Pin

2018-04-01

Fluoride and epigallocatechin gallate (EGCG) have been proven to prevent dental caries. The purpose of this study was to evaluate the effects of fluoride and EGCG on soft-drink-induced dental erosion in vitro. Forty enamel and dentin specimens were prepared from extracted human teeth. The specimens were divided into 4 groups and treated separately with distilled water (as control), 0.5 M sodium fluoride (NF), 400 μM EGCG (EG), and a solution containing 0.5 M NaF and 400 μM EGCG (FG). Cyclic erosive treatment was performed according to the experimental procedures. The specimens were analyzed using laser scanning confocal microscopy, scanning electron microscopy, and a microhardness tester. The data were analyzed using ANOVA and Bonferroni's post hoc test. The significance level was set at 5%. The amount of substance loss was lower in the NF and EG groups than in the control group (p erosion-caused substance loss was more pronounced in the dentin than in the enamel specimens. Surface microhardness loss was lower in the NF and EG groups than in the control group (p erosion compared with the control group. Fluoride and EGCG may interfere with each other. The mechanisms of the anti-erosive effect need to be explored in the future. Copyright © 2018. Published by Elsevier B.V.

Crops: a green approach toward self-assembled soft materials.

Science.gov (United States)

Vemula, Praveen Kumar; John, George

2008-06-01

To date, a wide range of industrial materials such as solvents, fuels, synthetic fibers, and chemical products are being manufactured from petroleum resources. However, rapid depletion of fossil and petroleum resources is encouraging current and future chemists to orient their research toward designing safer chemicals, products, and processes from renewable feedstock with an increased awareness of environmental and industrial impact. Advances in genetics, biotechnology, process chemistry, and engineering are leading to a new manufacturing concept for converting renewable biomass to valuable fuels and products, generally known as the biorefinery concept. The swift integration of crop-based materials synthesis and biorefinery manufacturing technologies offers the potential for new advances in sustainable energy alternatives and biomaterials that will lead to a new manufacturing paradigm. This Account presents a novel and emerging concept of generating various forms of soft materials from crops (an alternate feedstock). In future research, developing biobased soft materials will be a fascinating yet demanding practice, which will have direct impact on industrial applications as an economically viable alternative. Here we discuss some remarkable examples of glycolipids generated from industrial byproducts such as cashew nut shell liquid, which upon self-assembly produced soft nanoarchitectures including lipid nanotubes, twisted/helical nanofibers, low-molecular-weight gels, and liquid crystals. Synthetic methods applied to a "chiral pool" of carbohydrates using the selectivity of enzyme catalysis yield amphiphilic products derived from biobased feedstock including amygdalin, trehalose, and vitamin C. This has been achieved with a lipase-mediated regioselective synthetic procedure to obtain such amphiphiles in quantitative yields. Amygdalin amphiphiles showed unique gelation behavior in a broad range of solvents such as nonpolar hexanes to polar aqueous solutions

Simulation Environment Synchronizing Real Equipment for Manufacturing Cell

Science.gov (United States)

Inukai, Toshihiro; Hibino, Hironori; Fukuda, Yoshiro

Recently, manufacturing industries face various problems such as shorter product life cycle, more diversified customer needs. In this situation, it is very important to reduce lead-time of manufacturing system constructions. At the manufacturing system implementation stage, it is important to make and evaluate facility control programs for a manufacturing cell, such as ladder programs for programmable logical controllers (PLCs) rapidly. However, before the manufacturing systems are implemented, methods to evaluate the facility control programs for the equipment while mixing and synchronizing real equipment and virtual factory models on the computers have not been developed. This difficulty is caused by the complexity of the manufacturing system composed of a great variety of equipment, and stopped precise and rapid support of a manufacturing engineering process. In this paper, a manufacturing engineering environment (MEE) to support manufacturing engineering processes using simulation technologies is proposed. MEE consists of a manufacturing cell simulation environment (MCSE) and a distributed simulation environment (DSE). MCSE, which consists of a manufacturing cell simulator and a soft-wiring system, is emphatically proposed in detail. MCSE realizes making and evaluating facility control programs by using virtual factory models on computers before manufacturing systems are implemented.

Magnetically Assisted Bilayer Composites for Soft Bending Actuators

Directory of Open Access Journals (Sweden)

Sung-Hwan Jang

2017-06-01

Full Text Available This article presents a soft pneumatic bending actuator using a magnetically assisted bilayer composite composed of silicone polymer and ferromagnetic particles. Bilayer composites were fabricated by mixing ferromagnetic particles to a prepolymer state of silicone in a mold and asymmetrically distributed them by applying a strong non-uniform magnetic field to one side of the mold during the curing process. The biased magnetic field induces sedimentation of the ferromagnetic particles toward one side of the structure. The nonhomogeneous distribution of the particles induces bending of the structure when inflated, as a result of asymmetric stiffness of the composite. The bilayer composites were then characterized with a scanning electron microscopy and thermogravimetric analysis. The bending performance and the axial expansion of the actuator were discussed for manipulation applications in soft robotics and bioengineering. The magnetically assisted manufacturing process for the soft bending actuator is a promising technique for various applications in soft robotics.

Magnetically Assisted Bilayer Composites for Soft Bending Actuators.

Science.gov (United States)

Jang, Sung-Hwan; Na, Seon-Hong; Park, Yong-Lae

2017-06-12

This article presents a soft pneumatic bending actuator using a magnetically assisted bilayer composite composed of silicone polymer and ferromagnetic particles. Bilayer composites were fabricated by mixing ferromagnetic particles to a prepolymer state of silicone in a mold and asymmetrically distributed them by applying a strong non-uniform magnetic field to one side of the mold during the curing process. The biased magnetic field induces sedimentation of the ferromagnetic particles toward one side of the structure. The nonhomogeneous distribution of the particles induces bending of the structure when inflated, as a result of asymmetric stiffness of the composite. The bilayer composites were then characterized with a scanning electron microscopy and thermogravimetric analysis. The bending performance and the axial expansion of the actuator were discussed for manipulation applications in soft robotics and bioengineering. The magnetically assisted manufacturing process for the soft bending actuator is a promising technique for various applications in soft robotics.

Cognitive and physiological effects of an "energy drink": an evaluation of the whole drink and of glucose, caffeine and herbal flavouring fractions.

Science.gov (United States)

Scholey, Andrew B; Kennedy, David O

2004-11-01

Both glucose and caffeine can improve aspects of cognitive performance and, in the case of caffeine, mood. There are few studies investigating the effects of the two substances in combination. We assessed the mood, cognitive and physiological effects of a soft drink containing caffeine and glucose as well as flavouring levels of herbal extracts. The effects of different drink fractions were also evaluated. Using a randomised, double-blind, balanced, five-way crossover design, 20 participants who were overnight fasted and caffeine-deprived received 250 ml drinks containing 37.5 g glucose; 75 mg caffeine; ginseng and ginkgo biloba at flavouring levels; a whole drink (containing all these substances) or a placebo (vehicle). Participants were assessed in each drink condition, separated by a 7-day wash-out period. Cognitive, psychomotor and mood assessment took place immediately prior to the drink then 30 min thereafter. The primary outcome measures included five aspects of cognitive performance from the Cognitive Drug Research assessment battery. Mood, heart rate and blood glucose levels were also monitored. Compared with placebo, the whole drink resulted in significantly improved performance on "secondary memory" and "speed of attention" factors. There were no other cognitive or mood effects. This pattern of results would not be predicted from the effects of glucose and caffeine in isolation, either as seen here or from the literature addressing the effects of the substances in isolation. These data suggest that there is some degree of synergy between the cognition-modulating effects of glucose and caffeine which merits further investigation.

Patterns of energy drink advertising over US television networks.

Science.gov (United States)

Emond, Jennifer A; Sargent, James D; Gilbert-Diamond, Diane

2015-01-01

To describe programming themes and the inclusion of adolescents in the base audience for television channels with high levels of energy drink advertising airtime. Secondary analysis of energy drink advertising airtime over US network and cable television channels (n = 139) from March, 2012 to February, 2013. Programming themes and the inclusion of adolescents in each channel's base audience were extracted from cable television trade reports. Energy drink advertising airtime. Channels were ranked by airtime; programming themes and the inclusion of adolescents in the base audience were summarized for the 10 channels with the most airtime. Over the study year, 36,501 minutes (608 hours) were devoted to energy drink advertisements; the top 10 channels accounted for 46.5% of such airtime. Programming themes for the top 10 channels were music (n = 3), sports (n = 3), action-adventure lifestyle (n = 2), African American lifestyle (n = 1), and comedy (n = 1). MTV2 ranked first in airtime devoted to energy drink advertisements. Six of the 10 channels with the most airtime included adolescents aged 12-17 years in their base audience. Energy drink manufacturers primarily advertise on channels that likely appeal to adolescents. Nutritionists may wish to consider energy drink media literacy when advising adolescents about energy drink consumption. Copyright © 2015 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Rapid manufacturing for microfluidics

CSIR Research Space (South Africa)

Land, K

2012-10-01

Full Text Available for microfluidics K. LAND, S. HUGO, M MBANJWA, L FOURIE CSIR Materials Science and Manufacturing P O Box 395, Pretoria 0001, SOUTH AFRICA Email: kland@csir.co.za INTRODUCTION Microfluidics refers to the manipulation of very small volumes of fluid.... Microfluidics is at the forefront of developing solutions for drug discovery, diagnostics (from glucose tests to malaria and TB testing) and environmental diagnostics (E-coli monitoring of drinking water). In order to quickly implement new designs, a rapid...

Elastic Inflatable Actuators for Soft Robotic Applications.

Science.gov (United States)

Gorissen, Benjamin; Reynaerts, Dominiek; Konishi, Satoshi; Yoshida, Kazuhiro; Kim, Joon-Wan; De Volder, Michael

2017-11-01

The 20th century's robotic systems have been made from stiff materials, and much of the developments have pursued ever more accurate and dynamic robots, which thrive in industrial automation, and will probably continue to do so for decades to come. However, the 21st century's robotic legacy may very well become that of soft robots. This emerging domain is characterized by continuous soft structures that simultaneously fulfill the role of robotic link and actuator, where prime focus is on design and fabrication of robotic hardware instead of software control. These robots are anticipated to take a prominent role in delicate tasks where classic robots fail, such as in minimally invasive surgery, active prosthetics, and automation tasks involving delicate irregular objects. Central to the development of these robots is the fabrication of soft actuators. This article reviews a particularly attractive type of soft actuators that are driven by pressurized fluids. These actuators have recently gained traction on the one hand due to the technology push from better simulation tools and new manufacturing technologies, and on the other hand by a market pull from applications. This paper provides an overview of the different advanced soft actuator configurations, their design, fabrication, and applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Voltammetric sensor for tartrazine determination in soft drinks using poly (p-aminobenzenesulfonic acid)/zinc oxide nanoparticles in carbon paste electrode.

Science.gov (United States)

Karim-Nezhad, Ghasem; Khorablou, Zeynab; Zamani, Maryam; Seyed Dorraji, Parisa; Alamgholiloo, Mahdieh

2017-04-01

Zinc oxide nanoparticles (ZnO NPs) and p-aminobenzenesulfonic acid (p-ABSA) were used to fabricate a modified electrode, as a highly sensitive and selective voltammetric sensor, for the determination of tartrazine. A fast and easy method for the fabrication of poly p-ABSA (Pp-ABSA)/ZnO NPs-carbon paste electrode (Pp-ABSA/ZnO NPs-CPE) by cyclic voltammetry was used. By combining the benefits of Pp-ABSA, ZnO NPs, and CPE, the resulted modified electrode exhibited outstanding electrocatalytic activity in terms of tartrazine oxidation by giving much higher peak currents than those obtained for the unmodified CPE and also other constructed electrodes. The effects of various experimental parameters on the voltammetric response of tartrazine were investigated. At the optimum conditions, the sensor has a linear response in the concentration range of 0349-5.44 μM, a good detection sensitivity (2.2034 μA/μM), and a detection limit of 80 nM of tartrazine. The proposed electrode was used for the determination of tartrazine in soft drinks with satisfactory results. Copyright © 2016. Published by Elsevier B.V.

Soft electron processor for surface sterilization of food material

International Nuclear Information System (INIS)

Baba, Takashi; Kaneko, Hiromi; Taniguchi, Shuichi

2004-01-01

As frozen or chilled foods have become popular nowadays, it has become very important to provide raw materials with lower level microbial contamination to food processing companies. Consequently, the sterilization of food material is one of the major topics for food processing. Dried materials like grains, beans and spices, etc., are not typically deeply contaminated by microorganisms, which reside on the surfaces of materials, so it is very useful to take low energetic, lower than 300 keV, electrons with small penetration power (Soft-Electrons), as a sterilization method for such materials. Soft-Electrons is researched and named by Dr. Hayashi et al. This is a non-thermal method, so one can keep foods hygienic without serious deterioration. It is also a physical method, so is free from residues of chemicals in foods. Recently, Nissin-High Voltage Co., Ltd. have developed and manufactured equipment for commercial use of Soft-Electrons (Soft Electron Processor), which can process 500 kg/h of grains. This report introduces the Soft Electron Processor and shows the results of sterilization of wheat and brown rice by the equipment

PENINGKATAN KINERJA OHMS (ORDER HANDLING MANUFACTURING SYSTEM MELALUI SOFT SYSTEMS METHODOLOGY (SSM

Directory of Open Access Journals (Sweden)

Slamet Budiarto

2015-12-01

Full Text Available Dalam penelitian ini, untuk meningkatkan kinerja OHMS yang karakteristiknya lebih kompleks, digunakan soft systems methodology yang banyak membantu para manajer untuk menyelesaikan masalah yang bervariasi dan kompleks. Permasalahan tersebut sering menemui kegagalan dalam penyelesaiannya ketika pendekatan system engineering (SE digunakan. Penelitian menunjukan gambaran aktivitas lebih jelas, dan penentuan indikator lebih terstruktur dengan mengkombinasikan IDEF0. Melalui soft systems methodology yang dikuantitatifkan pada langkah debating menunjukan aktivitas A4, yaitu membuat produk, paling penting dengan bobot 35,32%. Dari hasil dekomposisi aktivitas kritis meliputi A12: merencanakan program produksi dengan bobot 9,17%, A41: mengendalikan produksi dengan bobot 9,17%, A32: mendapatkan kapasitas produksi, dengan bobot 8,72% dan A45: mengetes rakitan akhir dengan bobot 8,72%. Selanjutnya kinerja yang perlu dicermati pada ICOM’s (Input, Control, Output, Mechanism, lebih banyak pada input aktivitas kritis.

PENINGKATAN KINERJA OHMS (ORDER HANDLING MANUFACTURING SYSTEM MELALUI SOFT SYSTEMS METHODOLOGY (SSM

Directory of Open Access Journals (Sweden)

Slamet Budiarto

2011-12-01

Full Text Available Dalam penelitian ini, untuk meningkatkan kinerja OHMS yang karakteristiknya lebih kompleks, digunakan soft systems methodology yang banyak membantu para manajer untuk menyelesaikan masalah yang bervariasi dan kompleks. Permasalahan tersebut sering menemui kegagalan dalam penyelesaiannya ketika pendekatan system engineering (SE digunakan. Penelitian menunjukan gambaran aktivitas lebih jelas, dan penentuan indikator lebih terstruktur dengan mengkombinasikan IDEF0. Melalui soft systems methodology yang dikuantitatifkan pada langkah debating menunjukan aktivitas A4, yaitu membuat produk, paling penting dengan bobot 35,32%. Dari hasil dekomposisi aktivitas kritis meliputi A12: merencanakan program produksi dengan bobot 9,17%, A41: mengendalikan produksi dengan bobot 9,17%, A32: mendapatkan kapasitas produksi, dengan bobot 8,72% dan A45: mengetes rakitan akhir dengan bobot 8,72%. Selanjutnya kinerja yang perlu dicermati pada ICOM’s (Input, Control, Output, Mechanism, lebih banyak pada input aktivitas kritis.

Australian print news media coverage of sweet, non-alcoholic drinks sends mixed health messages.

Science.gov (United States)

Bonfiglioli, Catriona; Hattersley, Libby; King, Lesley

2011-08-01

This study aimed to analyse the contribution of Australian print news coverage to the public profile of sweet, non-alcoholic beverages. News media portrayal of health contributes to individuals' decision-making. The focus on sugar-sweetened beverages reflects their contribution to excessive energy intake. One year's coverage of sweet, non-alcoholic beverages by major Australian newspapers was analysed using content and frame analysis. Research questions addressed which sweet drinks are most prominently covered, what makes sweet drinks newsworthy and how are the health aspects of sweet drinks framed? Fruit juice was the most widely covered sweet drink, closely followed by carbonated, sugar-sweetened soft drinks. Overall coverage was positively oriented towards sweet drinks, with fruit juice primarily portrayed as having health benefits. Some coverage mentioned risks of sweet drinks, such as obesity, tooth decay, metabolic syndrome and heart attack. Sweet drinks often enjoy positive coverage, with their health benefits and harms central to their ability to attract journalists' attention. However, the mix of coverage may be contributing to consumer confusion about whether it is safe and/or healthy to consume sweet non-alcoholic drinks. Framing of sweet drinks as healthy may undermine efforts to encourage individuals to avoid excess consumption of energy-dense drinks which offer few or minimal health benefits. © 2011 The Authors. ANZJPH © 2011 Public Health Association of Australia.

Improving Drinking Water Quality by Remineralisation.

Science.gov (United States)

Luptáková, Anna; Derco, Ján

2015-01-01

The reason of low mineral content in source water is its origin in poorly soluble mineral geological structures. There are many areas with very soft low-mineralised water around the world. All people involved in drinking water treatment as well as some public health experts and producers of chemicals used for water treatment may be interested in the study. Enrichment of drinking water by minerals including calcium and magnesium is very important particularly in regions where drinking water is prepared by desalination. The aim of this work was to study and intensify the recarbonization process. Half-calcined dolomite in combination with carbon dioxide constitutes the chemistry of the applied method. Advantages of using a fluidised bed reactor contributed also significantly to the process efficiency enhancement. Continuous input of carbon dioxide into the fluidised bed recarbonization reactor resulted in an increase in the recarbonization rate by about one order of magnitude compared with the process in without carbon dioxide addition. Very good fit of experimental data for hydrodynamic characteristics of fluidised bed was obtained using simple model based on the Richardson and Zaki expansion equation. The first order model describes kinetic data from the recarbonization process with a good accuracy. Higher recarbonization rates were observed with smaller particles of half-calcined dolomite.

Point card compatible automatic vending machine for canned drink; Point card taio kan jido hanbaiki

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-01-10

A point card compatible automatic vending machine for canned drinks is developed, which provides drink manufacturers with a powerful tool to acquire selling sites and attract consumers. Since the machine is equipped with a device to handle point cards, regular customers have increased and sales have picked up. A point card issuing device is also installed, and the new machine issues a point card whenever a customer wants. The drink manufacturers are evaluating high of the vending machine because it will contribute to the diffusion of the point card system and because a sales promotion campaign may be conducted through the vending machine for instance by exchanging a fully marked card with a giveaway on the spot. In the future, a bill validator (paper money identifier) will be integrated even with small size machines for the diffusion of point card compatible machines. (translated by NEDO)

[Abuse of energy drinks: does it pose a risk?].

Science.gov (United States)

Petit, Aymeric; Karila, Laurent; Lejoyeux, Michel

2015-03-01

Energy drinks designate "any product in the form of a drink or concentrated liquid containing a mixture of ingredients having the property to raise the level of energy and liveliness". Their introduction has raised many reluctance and reserves after numerous cardiovascular and neurological injuries among regular consumers. This article attempts to synthesize the existing literature on energy drinks. The review focuses to show that excessive energy drinks consumption cause many complications. The literature review was conducted from 2001 to 2014, using PubMed, Google Scholar, EMBASE, and PsycInfo, using the following keywords alone or combined: energy drinks, caffeine, taurine, toxicity, dependence, complications. Occasional or moderate consumption of these cans seem to present little risk to healthy adults. However, their repeated consumption in proportions that far exceed the recommendations for recommended use by the manufacturers, combined with the use of alcohol or illicit drugs consumption increases the risk of occurrence of somatic and psychiatric complications, especially among underage, and subjects with cardiovascular and neurological history. Repeated consumption of energy drinks increases the risk of somatic and psychiatric complications. Further studies must be controlled to improve our understanding of other possible negative consequences on health. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Yes, the government should tax soft drinks: findings from a citizens' jury in Australia.

Science.gov (United States)

Moretto, Nicole; Kendall, Elizabeth; Whitty, Jennifer; Byrnes, Joshua; Hills, Andrew P; Gordon, Louisa; Turkstra, Erika; Scuffham, Paul; Comans, Tracy

2014-02-27

Taxation has been suggested as a possible preventive strategy to address the serious public health concern of childhood obesity. Understanding the public's viewpoint on the potential role of taxation is vital to inform policy decisions if they are to be acceptable to the wider community. A Citizens' Jury is a deliberative method for engaging the public in decision making and can assist in setting policy agendas. A Citizens' Jury was conducted in Brisbane, Australia in May 2013 to answer the question: Is taxation on food and drinks an acceptable strategy to the public in order to reduce rates of childhood obesity? Citizens were randomly selected from the electoral roll and invited to participate. Thirteen members were purposively sampled from those expressing interest to broadly reflect the diversity of the Australian public. Over two days, participants were presented with evidence on the topic by experts, were able to question witnesses and deliberate on the evidence. The jurors unanimously supported taxation on sugar-sweetened drinks but generally did not support taxation on processed meats, snack foods and foods eaten/ purchased outside the home. They also supported taxation on snack foods on the condition that traffic light labelling was also introduced. Though they were not specifically asked to deliberate strategies outside of taxation, the jurors strongly recommended more nutritional information on all food packaging using the traffic light and teaspoon labelling systems for sugar, salt and fat content. The Citizens' Jury suggests that the general public may support taxation on sugar-sweetened drinks to reduce rates of obesity in children. Regulatory reforms of taxation on sugar-sweetened drinks and improved labelling of nutritional information on product packaging were strongly supported by all members of the jury. These reforms should be considered by governments to prevent childhood obesity and the future burden on society from the consequences of obesity.

Yes, The Government Should Tax Soft Drinks: Findings from a Citizens’ Jury in Australia

Science.gov (United States)

Moretto, Nicole; Kendall, Elizabeth; Whitty, Jennifer; Byrnes, Joshua; Hills, Andrew P.; Gordon, Louisa; Turkstra, Erika; Scuffham, Paul; Comans, Tracy

2014-01-01

Taxation has been suggested as a possible preventive strategy to address the serious public health concern of childhood obesity. Understanding the public’s viewpoint on the potential role of taxation is vital to inform policy decisions if they are to be acceptable to the wider community. A Citizens’ Jury is a deliberative method for engaging the public in decision making and can assist in setting policy agendas. A Citizens’ Jury was conducted in Brisbane, Australia in May 2013 to answer the question: Is taxation on food and drinks an acceptable strategy to the public in order to reduce rates of childhood obesity? Citizens were randomly selected from the electoral roll and invited to participate. Thirteen members were purposively sampled from those expressing interest to broadly reflect the diversity of the Australian public. Over two days, participants were presented with evidence on the topic by experts, were able to question witnesses and deliberate on the evidence. The jurors unanimously supported taxation on sugar-sweetened drinks but generally did not support taxation on processed meats, snack foods and foods eaten/ purchased outside the home. They also supported taxation on snack foods on the condition that traffic light labelling was also introduced. Though they were not specifically asked to deliberate strategies outside of taxation, the jurors strongly recommended more nutritional information on all food packaging using the traffic light and teaspoon labelling systems for sugar, salt and fat content. The Citizens’ Jury suggests that the general public may support taxation on sugar-sweetened drinks to reduce rates of obesity in children. Regulatory reforms of taxation on sugar-sweetened drinks and improved labelling of nutritional information on product packaging were strongly supported by all members of the jury. These reforms should be considered by governments to prevent childhood obesity and the future burden on society from the consequences of

Yes, The Government Should Tax Soft Drinks: Findings from a Citizens’ Jury in Australia

Directory of Open Access Journals (Sweden)

Nicole Moretto

2014-02-01

Full Text Available Taxation has been suggested as a possible preventive strategy to address the serious public health concern of childhood obesity. Understanding the public’s viewpoint on the potential role of taxation is vital to inform policy decisions if they are to be acceptable to the wider community. A Citizens’ Jury is a deliberative method for engaging the public in decision making and can assist in setting policy agendas. A Citizens’ Jury was conducted in Brisbane, Australia in May 2013 to answer the question: Is taxation on food and drinks an acceptable strategy to the public in order to reduce rates of childhood obesity? Citizens were randomly selected from the electoral roll and invited to participate. Thirteen members were purposively sampled from those expressing interest to broadly reflect the diversity of the Australian public. Over two days, participants were presented with evidence on the topic by experts, were able to question witnesses and deliberate on the evidence. The jurors unanimously supported taxation on sugar-sweetened drinks but generally did not support taxation on processed meats, snack foods and foods eaten/ purchased outside the home. They also supported taxation on snack foods on the condition that traffic light labelling was also introduced. Though they were not specifically asked to deliberate strategies outside of taxation, the jurors strongly recommended more nutritional information on all food packaging using the traffic light and teaspoon labelling systems for sugar, salt and fat content. The Citizens’ Jury suggests that the general public may support taxation on sugar-sweetened drinks to reduce rates of obesity in children. Regulatory reforms of taxation on sugar-sweetened drinks and improved labelling of nutritional information on product packaging were strongly supported by all members of the jury. These reforms should be considered by governments to prevent childhood obesity and the future burden on society from

Bipolar soft connected, bipolar soft disconnected and bipolar soft compact spaces

Directory of Open Access Journals (Sweden)

Muhammad Shabir

2017-06-01

Full Text Available Bipolar soft topological spaces are mathematical expressions to estimate interpretation of data frameworks. Bipolar soft theory considers the core features of data granules. Bipolarity is important to distinguish between positive information which is guaranteed to be possible and negative information which is forbidden or surely false. Connectedness and compactness are the most important fundamental topological properties. These properties highlight the main features of topological spaces and distinguish one topology from another. Taking this into account, we explore the bipolar soft connectedness, bipolar soft disconnectedness and bipolar soft compactness properties for bipolar soft topological spaces. Moreover, we introduce the notion of bipolar soft disjoint sets, bipolar soft separation, and bipolar soft hereditary property and study on bipolar soft connected and disconnected spaces. By giving the detailed picture of bipolar soft connected and disconnected spaces we investigate bipolar soft compact spaces and derive some results related to this concept.

Effects of material properties on soft contact dynamics

International Nuclear Information System (INIS)

Khurshid, A.; Malik, M.A.; Ghafoor, A.

2009-01-01

The superiority of deformable human fingertips as compared to hard robot gripper fingers for grasping and manipulation has led to a number of investigations with robot hands employing elastomers or materials such as fluids or powders beneath a membrane at the fingertips. In this paper, to analyze the stability of dynamic control of an object grasped between two soft fingertips through a soft interface using the viscoelastic material between the manipulating fingers and a manipulated object is modeled through bond graph method (BGM). The fingers are made viscoelastic by using springs and dampers. Detailed bond graph modeling (BGM) of the contact phenomenon with two soft-finger contacts considered to be placed against each other on the opposite sides of the grasped object as is generally the case in a manufacturing environment is presented. The stiffness of the springs is exploited in order to achieve the stability in the soft-grasping which includes friction between the soft finger contact surfaces and the object, The paper also analyses stability of dynamic control through a soft interface between a manipulating finger and a manipulated object. It is shown in the paper that the system stability depends on the visco-elastic material properties of the soft interface. Method of root locus is used to analyze this phenomenon. The paper shows how the weight of the object coming downward is controlled by the friction between the fingers and the object during the application of contact forces by varying the damping and the stiffness in the soft finger. (author)

Bacteriology Quality of Zobo Drinks Consumed in Some Parts of ...

African Journals Online (AJOL)

Michael Horsfall

ABTRACT: The bacteriology of Zobo drink prepared and sold at nine market; Alamisi market, Ikirun ... sold in these markets are potential vehicles for transmitting food borne illness, thus the need to ..... Consequently education of the manufacturers and provision ... effective monitoring and enforcement of the existing punitive ...

Migration of toxicants from plastics into drinking water during storage ...

African Journals Online (AJOL)

In this study, migration of toxicants, such as, manufacturing additives and previously adsorbed materials into drinking water stored inside plastic containers was investigated. The study considered virgin containers as well as those previously used to store sulphuric acid, calcium hypochlorite, methyl ethyl ketone (MEK) and ...

Design and development of a bio-inspired, under-actuated soft gripper.

Science.gov (United States)

Hassan, Taimoor; Manti, Mariangela; Passetti, Giovanni; d'Elia, Nicolò; Cianchetti, Matteo; Laschi, Cecilia

2015-08-01

The development of robotic devices able to perform manipulation tasks mimicking the human hand has been assessed on large scale. This work stands in the challenging scenario where soft materials are combined with bio-inspired design in order to develop soft grippers with improved grasping and holding capabilities. We are going to show a low-cost, under-actuated and adaptable soft gripper, highlighting the design and the manufacturing process. In particular, a critical analysis is made among three versions of the gripper with same design and actuation mechanism, but based on different materials. A novel actuation principle has been implemented in both cases, in order to reduce the encumbrance of the entire system and improve its aesthetics. Grasping and holding capabilities have been tested for each device, with target objects varying in shape, size and material. Results highlight synergy between the geometry and the intrinsic properties of the soft material, showing the way to novel design principles for soft grippers.

Risk assessment through drinking water pathway via uncertainty modeling of contaminant transport using soft computing

International Nuclear Information System (INIS)

Datta, D.; Ranade, A.K.; Pandey, M.; Sathyabama, N.; Kumar, Brij

2012-01-01

The basic objective of an environmental impact assessment (EIA) is to build guidelines to reduce the associated risk or mitigate the consequences of the reactor accident at its source to prevent deterministic health effects, to reduce the risk of stochastic health effects (eg. cancer and severe hereditary effects) as much as reasonable achievable by implementing protective actions in accordance with IAEA guidance (IAEA Safety Series No. 115, 1996). The measure of exposure being the basic tool to take any appropriate decisions related to risk reduction, EIA is traditionally expressed in terms of radiation exposure to the member of the public. However, models used to estimate the exposure received by the member of the public are governed by parameters some of which are deterministic with relative uncertainty and some of which are stochastic as well as imprecise (insufficient knowledge). In an admixture environment of this type, it is essential to assess the uncertainty of a model to estimate the bounds of the exposure to the public to invoke a decision during an event of nuclear or radiological emergency. With a view to this soft computing technique such as evidence theory based assessment of model parameters is addressed to compute the risk or exposure to the member of the public. The possible pathway of exposure to the member of the public in the aquatic food stream is the drinking of water. Accordingly, this paper presents the uncertainty analysis of exposure via uncertainty analysis of the contaminated water. Evidence theory finally addresses the uncertainty in terms of lower bound as belief measure and upper bound of exposure as plausibility measure. In this work EIA is presented using evidence theory. Data fusion technique is used to aggregate the knowledge on the uncertain information. Uncertainty of concentration and exposure is expressed as an interval of belief, plausibility

A survey on dielectric elastomer actuators for soft robots.

Science.gov (United States)

Gu, Guo-Ying; Zhu, Jian; Zhu, Li-Min; Zhu, Xiangyang

2017-01-23

Conventional industrial robots with the rigid actuation technology have made great progress for humans in the fields of automation assembly and manufacturing. With an increasing number of robots needing to interact with humans and unstructured environments, there is a need for soft robots capable of sustaining large deformation while inducing little pressure or damage when maneuvering through confined spaces. The emergence of soft robotics offers the prospect of applying soft actuators as artificial muscles in robots, replacing traditional rigid actuators. Dielectric elastomer actuators (DEAs) are recognized as one of the most promising soft actuation technologies due to the facts that: i) dielectric elastomers are kind of soft, motion-generating materials that resemble natural muscle of humans in terms of force, strain (displacement per unit length or area) and actuation pressure/density; ii) dielectric elastomers can produce large voltage-induced deformation. In this survey, we first introduce the so-called DEAs emphasizing the key points of working principle, key components and electromechanical modeling approaches. Then, different DEA-driven soft robots, including wearable/humanoid robots, walking/serpentine robots, flying robots and swimming robots, are reviewed. Lastly, we summarize the challenges and opportunities for the further studies in terms of mechanism design, dynamics modeling and autonomous control.

Characterization of diffraction gratings by use of a tabletop soft-x-ray laser

International Nuclear Information System (INIS)

Seminario, Max; Rocca, Jorge J.; Depine, Ricardo A.; Bach, Benny; Bach, Bernie

2001-01-01

We have demonstrated the use of a high-repetition-rate 46.9-mm tabletop laser to characterize diffraction gratings designed for grazing-incidence operation in the soft-x-ray spectral region. The efficiencies for various diffraction orders were measured as a function of angle of incidence and compared with the results of model simulations. This measurement technique provides benchmarks with which to improve electromagnetic codes used in the design of soft-x-ray diffraction gratings. The results illustrate the potential of compact tabletop soft-x-ray lasers for use as a new tool for characterization of short-wavelength optics at the manufacturer's site

Field investigation of arsenic in ceramic pot filter-treated drinking water.

Science.gov (United States)

Archer, A R; Elmore, A C; Bell, E; Rozycki, C

2011-01-01

Ceramic pot filters (CPFs) is one of several household water treatment technologies that is used to treat drinking water in developing areas. The filters have the advantage of being able to be manufactured using primarily locally available materials and local labor. However, naturally-occurring arsenic present in the clay used to make the filters has the potential to contaminate the water in excess of the World Health Organization drinking water standard of 0.01 mg/L. A manufacturing facility in Guatemala routinely rinses filters to reduce arsenic concentrations prior to distribution to consumers. A systemic study was performed to evaluate the change in arsenic concentrations with increasing volumes of rinse water. Arsenic field kit results were compared to standard method laboratory results, and dissolved versus suspended arsenic concentrations in CPF-treated water were evaluated. The results of the study suggest that rinsing is an effective means of mitigating arsenic leached from the filters, and that even in the absence of a formal rinsing program, routine consumer use may result in the rapid decline of arsenic concentrations. More importantly, the results indicate that filter manufacturers should give strong consideration to implementing an arsenic testing program.

Soft errors in dynamic random access memories - a basis for dosimetry

International Nuclear Information System (INIS)

Haque, A.K.M.M.; Yates, J.; Stevens, D.

1986-01-01

The soft error rates of a number of 64k and 256k dRAMs from several manufacturers have been measured, employing a MC 68000 microprocessor. For this 'accelerated test' procedure, a 37 kBq (1 μCi) 241 Am alpha emitting source was used. Both 64k and 256k devices exhibited widely differing error rates. It was generally observed that the spread of errors over a particular device/manufacturer was much smaller than the differences between device families and manufacturers. Bit line errors formed a significant part of the total for 64k dRAMs, whereas in 256k dRAMs cell errors dominated; the latter also showed an enhanced sensitivity to integrated dose leading to total failure, and a time-dependent recovery. Although several theoretical models explain soft error mechanisms and predict responses which are compatible with our experimental results, it is considered that microdosimetric and track structure methods should be applied to the problem for its better appreciation. Finally, attention is drawn to the need for further studies of dRAMs, with a view to their use as digital dosemeters. (author)

Food and drink purchasing habits out of school at lunchtime: a national survey of secondary school pupils in Scotland.

Science.gov (United States)

Macdiarmid, Jennie I; Wills, Wendy J; Masson, Lindsey F; Craig, Leone C A; Bromley, Catherine; McNeill, Geraldine

2015-08-04

Food and drink purchasing habits of pupils out of school at lunchtime may be contributing to poor dietary intakes and overweight and obesity. The aim of this study was to identify the places from which purchases were made, types of food and drinks purchased and, the reasons for purchasing food or drinks out of school. A survey of the food and drinks purchasing habits of secondary school pupils (11-16 yrs) out of school at lunchtime was conducted in Scotland in 2010. A face-to-face interview and a self-completion questionnaire was designed to identify the food outlets used at lunchtime, types of food and drinks purchased and pupils' reasons for purchasing food or drinks out of school. Height and weight were measured and BMI centiles used to classify pupils as normal weight, overweight or obese. Results were compared by age group, sex, BMI group and level of socio-economic deprivation. Of the 612 pupils who completed the survey, 97 % reported having access to places selling food or drinks out of school at lunchtime, and of these 63 % made purchases. A higher proportion of pupils from more deprived areas reported purchasing food or drinks out of school, but the proportion making purchases did not differ significantly by sex or BMI group. Supermarkets were the outlets from which pupils reported most often making purchases, with fewer purchasing food or drinks from fast food takeaways, and this did not differ significantly by socio-economic deprivation. Reasons for making purchases included availability of preferred food and drinks, some of which are restricted for sale in schools, and social reasons, such as wanting to be with friends. Sandwiches and non-diet soft drinks were items most commonly purchased, followed by confectionery and diet soft drinks. However, less than 10 % of all the secondary school pupils reported purchasing these foods every day. Supermarkets, not just fast food outlets, should be considered when developing strategies to improve the dietary

Understanding standard drinks and drinking guidelines.

Science.gov (United States)

Kerr, William C; Stockwell, Tim

2012-03-01

For consumers to follow drinking guidelines and limit their risk of negative consequences they need to track their ethanol consumption. This paper reviews published research on the ability of consumers to utilise information about the alcohol content of beverages when expressed in different forms, for example in standard drinks or units versus percentage alcohol content. A review of the literature on standard drink definitions and consumer understanding of these, actual drink pouring, use of standard drinks in guidelines and consumer understanding and use of these. Standard drink definitions vary across countries and typically contain less alcohol than actual drinks. Drinkers have difficulty defining and pouring standard drinks with over-pouring being the norm such that intake volume is typically underestimated. Drinkers have difficulty using percentage alcohol by volume and pour size information in calculating intake but can effectively utilise standard drink labelling to track intake. Standard drink labelling is an effective but little used strategy for enabling drinkers to track their alcohol intake and potentially conform to safe or low-risk drinking guidelines. © 2011 Australasian Professional Society on Alcohol and other Drugs.

Effects of two soft drinks on shear bond strength and adhesive remnant index of orthodontic metal brackets.

Science.gov (United States)

Sajadi, Soodabeh Sadat; Eslami Amirabadi, Gholamreza; Sajadi, Sepideh

2014-07-01

Bond failure of brackets during orthodontic treatment is a common problem; which results in treatment interference, increased treatment time and prolonged clinical time for rebonding of failed brackets. The purpose of this study was to evaluate the effects of Coca-Cola and a non-alcoholic beer on the shear bond strength and adhesive remnant index (ARI) of orthodontic metal brackets in vitro. Eighty intact human premolars were divided into two experimental groups of Coca-Cola and non-alcoholic beer (Istak), and a control group of artificial saliva. Over a period of thirty days, the test groups were immersed in the respective soft drinks for 5 minutes, twice a day. For the remainder of the time, they were kept in artificial saliva at 37°C. The control group was stored in artificial saliva during the experiment. All samples were subjected to shearing forces using Universal Testing Machine. ARI was determined with a stereomicroscope at ×12 magnification. The data of shear bond strength were statistically analyzed by one-way ANOVA and Tukey's Post-Hoc test and the data of ARI scores were analyzed by Kruskal-Wallis test. No significant difference was observed in ARIs of the three groups (P≤ 0.552). The shear bond strength of Coke group was significantly lower than that of the two other groups (P≤ 0.035); but there was no significant difference between the shear bond strength of Istak and the control group (P≤ 0.999). Coca-Cola decreased the shear bond strength of orthodontic brackets.

On the dynamic response of additively manufactured 316L

Science.gov (United States)

Smith, Liam; Eakins, Daniel; Chapman, David; Hooper, Paul

2017-06-01

Understanding the dynamic performance of Additively Manufactured (AM) materials is important when designing components for real-world applications. A series of Taylor tests were carried out on AM and conventionally manufactured 316L Stainless Steel. AM specimens were produced with a Renishaw AM250 selective laser melting machine. Taylor tests were conducted in a reverse anvil-on-rod configuration with soft capture and post loading measurements used to corroborate high speed deformation imaging. The influence of microstructure orientation and surface roughness was investigated by manufacturing samples parallel and perpendicular to build direction and with both as-built and machined finishes. Results were compared with optimised Johnson-Cook and Zerilli-Armstrong constitutive models within AUTODYN FE software.

3D printed soft parallel actuator

Science.gov (United States)

Zolfagharian, Ali; Kouzani, Abbas Z.; Khoo, Sui Yang; Noshadi, Amin; Kaynak, Akif

2018-04-01

This paper presents a 3-dimensional (3D) printed soft parallel contactless actuator for the first time. The actuator involves an electro-responsive parallel mechanism made of two segments namely active chain and passive chain both 3D printed. The active chain is attached to the ground from one end and constitutes two actuator links made of responsive hydrogel. The passive chain, on the other hand, is attached to the active chain from one end and consists of two rigid links made of polymer. The actuator links are printed using an extrusion-based 3D-Bioplotter with polyelectrolyte hydrogel as printer ink. The rigid links are also printed by a 3D fused deposition modelling (FDM) printer with acrylonitrile butadiene styrene (ABS) as print material. The kinematics model of the soft parallel actuator is derived via transformation matrices notations to simulate and determine the workspace of the actuator. The printed soft parallel actuator is then immersed into NaOH solution with specific voltage applied to it via two contactless electrodes. The experimental data is then collected and used to develop a parametric model to estimate the end-effector position and regulate kinematics model in response to specific input voltage over time. It is observed that the electroactive actuator demonstrates expected behaviour according to the simulation of its kinematics model. The use of 3D printing for the fabrication of parallel soft actuators opens a new chapter in manufacturing sophisticated soft actuators with high dexterity and mechanical robustness for biomedical applications such as cell manipulation and drug release.

Economic Analysis of Additive Manufacturing Integration in Injection Molding Process Chain

DEFF Research Database (Denmark)

Charalambis, Alessandro; Kerbache, Laoucine; Tosello, Guido

The purpose of this research is to analyze how additive manufacturing can create value when it is utilized as a supportive technology to injection molding by quantifying the cost advantages that can be obtained. Tooling for the product development phase is investigated as pilot integration area...... of additive manufacturing with injection molding. Cost considerations are discussed through the development of a cost estimation model. The study shows that integration of additive manufacturing in the product development phase for fabrication of soft tooling is economically convenient with a cost reduction...... of 79,8% and 89,9%. The cost models on additive manufacturing have been built so far on the idea of substituting injection molding with additive manufacturing. In response to this literature gap, this research addresses the advantages of additive manufacturing utilized in a synergistic rather than...

Consumers' choice of drinking water: Is it dependent upon perceived quality, convenience, price and attitude?

Science.gov (United States)

Wahid, Nabsiah Abdul; Cheng, Patrick Tan Foon; Abustan, Ismail; Nee, Goh Yen

2017-10-01

Tap water is one of the many sources of water that the public as consumers can choose for drinking. This study hypothesized that perceived quality, convenience, price and environmental attitude would determine consumers's choice of drinking water following the Attribution Theory as the underlying model. A survey was carried out on Malaysia's public at large. From 301 usable data, the PLS analysis revealed that only perceived quality, convenience and price attributed towards the public's choice of drinking water while attitude was not significant. The findings are beneficial for the water sector industry, particularly for drinking water operators, state governments, and alternative drinking water manufacturers like bottled water companies. The ability to identify factors for why consumers in the marketplace choose the source of their drinking water would enable the operators to plan and strategize tactics that can disseminate accurate knowledge about the product that can motivate marketability of drinking water in Malaysia.

Simultaneous determination of ascorbic acid and caffeine in commercial soft drinks using reversed-phase ultraperformance liquid chromatography.

Science.gov (United States)

Turak, Fatma; Güzel, Remziye; Dinç, Erdal

2017-04-01

A new reversed-phase ultraperformance liquid chromatography method with a photodiode array detector was developed for the quantification of ascorbic acid (AA) and caffeine (CAF) in 11 different commercial drinks consisting of one energy drink and 10 ice tea drinks. Separation of the analyzed AA and CAF with an internal standard, caffeic acid, was performed on a Waters BEH C 18 column (100 mm × 2.1 mm, 1.7 μm i.d.), using a mobile phase consisting of acetonitrile and 0.2M H 3 PO 4 (11:89, v/v) with a flow rate of 0.25 mL/min and an injection volume of 1.0 μL. Calibration graphs for AA and CAF were computed from the peak area ratio of AA/internal standard and CAF/internal standard detected at 244.0 nm and 273.6 nm, respectively. The developed reversed-phase ultraperformance liquid chromatography method was validated by analyzing standard addition samples. The proposed reversed-phase ultraperformance liquid chromatography method gave us successful results for the quantitative analysis of commercial drinks containing AA and CAF substances. Copyright © 2016. Published by Elsevier B.V.

Simultaneous determination of ascorbic acid and caffeine in commercial soft drinks using reversed-phase ultraperformance liquid chromatography

Directory of Open Access Journals (Sweden)

Fatma Turak

2017-04-01

Full Text Available A new reversed-phase ultraperformance liquid chromatography method with a photodiode array detector was developed for the quantification of ascorbic acid (AA and caffeine (CAF in 11 different commercial drinks consisting of one energy drink and 10 ice tea drinks. Separation of the analyzed AA and CAF with an internal standard, caffeic acid, was performed on a Waters BEH C18 column (100 mm × 2.1 mm, 1.7 μm i.d., using a mobile phase consisting of acetonitrile and 0.2M H3PO4 (11:89, v/v with a flow rate of 0.25 mL/min and an injection volume of 1.0 μL. Calibration graphs for AA and CAF were computed from the peak area ratio of AA/internal standard and CAF/internal standard detected at 244.0 nm and 273.6 nm, respectively. The developed reversed-phase ultraperformance liquid chromatography method was validated by analyzing standard addition samples. The proposed reversed-phase ultraperformance liquid chromatography method gave us successful results for the quantitative analysis of commercial drinks containing AA and CAF substances.

Health Effects of Energy Drinks on Children, Adolescents, and Young Adults

Science.gov (United States)

Seifert, Sara M.; Schaechter, Judith L.; Hershorin, Eugene R.

2011-01-01

OBJECTIVE: To review the effects, adverse consequences, and extent of energy drink consumption among children, adolescents, and young adults. METHODS: We searched PubMed and Google using “energy drink,” “sports drink,” “guarana,” “caffeine,” “taurine,” “ADHD,” “diabetes,” “children,” “adolescents,” “insulin,” “eating disorders,” and “poison control center” to identify articles related to energy drinks. Manufacturer Web sites were reviewed for product information. RESULTS: According to self-report surveys, energy drinks are consumed by 30% to 50% of adolescents and young adults. Frequently containing high and unregulated amounts of caffeine, these drinks have been reported in association with serious adverse effects, especially in children, adolescents, and young adults with seizures, diabetes, cardiac abnormalities, or mood and behavioral disorders or those who take certain medications. Of the 5448 US caffeine overdoses reported in 2007, 46% occurred in those younger than 19 years. Several countries and states have debated or restricted energy drink sales and advertising. CONCLUSIONS: Energy drinks have no therapeutic benefit, and many ingredients are understudied and not regulated. The known and unknown pharmacology of agents included in such drinks, combined with reports of toxicity, raises concern for potentially serious adverse effects in association with energy drink use. In the short-term, pediatricians need to be aware of the possible effects of energy drinks in vulnerable populations and screen for consumption to educate families. Long-term research should aim to understand the effects in at-risk populations. Toxicity surveillance should be improved, and regulations of energy drink sales and consumption should be based on appropriate research. PMID:21321035

60-day aging requirement does not ensure safety of surface-mold-ripened soft cheeses manufactured from raw or pasteurized milk when Listeria monocytogenes is introduced as a postprocessing contaminant.

Science.gov (United States)

D'Amico, Dennis J; Druart, Marc J; Donnelly, Catherine W

2008-08-01

Because of renewed interest in specialty cheeses, artisan and farmstead producers are manufacturing surface-mold-ripened soft cheeses from raw milk, using the 60-day holding standard (21 CFR 133.182) to achieve safety. This study compared the growth potential of Listeria monocytogenes on cheeses manufactured from raw or pasteurized milk and held for > 60 days at 4 degrees C. Final cheeses were within federal standards of identity for soft ripened cheese, with low moisture targets to facilitate the holding period. Wheels were surface inoculated with a five-strain cocktail of L. monocytogenes at approximately 0.2 CFU/ cm2 (low level) or 2 CFU/cm2 (high level), ripened, wrapped, and held at 4 degrees C. Listeria populations began to increase by day 28 for all treatments after initial population declines. From the low initial inoculation level, populations in raw and pasteurized milk cheese reached maximums of 2.96 +/- 2.79 and 2.33 +/- 2.10 log CFU/g, respectively, after 60 days of holding. Similar growth was observed in cheese inoculated at high levels, where populations reached 4.55 +/- 4.33 and 5.29 +/- 5.11 log CFU/g for raw and pasteurized milk cheeses, respectively. No significant differences (P milk types. Independent of the milk type, cheeses held for 60 days supported growth from very low initial levels of L. monocytogenes introduced as a postprocess contaminant. The safety of cheeses of this type must be achieved through control strategies other than aging, and thus revision of current federal regulations is warranted.

Growth of Listeria monocytogenes in Camembert and other soft cheeses at refrigeration temperatures.

Science.gov (United States)

Back, J P; Langford, S A; Kroll, R G

1993-08-01

Listeria monocytogenes survived and, under most conditions, multiplied when inoculated directly into the cheese milk of laboratory made Camembert cheeses. The rate and extent of growth was reduced at lower storage temperatures. Significantly higher rates of growth occurred at the surface compared with the centre of the cheeses, and these were probably associated with increased pH and proteolysis at the cheese surface due to the mould ripening process. Similar results were obtained with Camenbert cheeses surface inoculated after manufacture. There was also temperature-dependent growth of List. monocytogenes on a range of inoculated commercially manufactured soft cheeses. Significant growth occurred in Cambazola, French and English Brie, blue and white Lymeswold, French Camembert and Brie with garlic. Little if any growth occurred in blue and white Stilton, Mycella, Chaume and full fat soft cheese with garlic and herbs at the temperatures examined.

ANALYTICAL METHOD DEVELOPMENT FOR THE ANALYSIS OF N-NITROSODIMETHYLAMINE (NDMA) IN DRINKING WATER

Science.gov (United States)

N-Nitrosodimethylamine (NDMA), a by-product of the manufacture of liquid rocket fuel, has recently been identified as a contaminant in several California drinking water sources. The initial source of the contamination was identified as an aerospace facility. Subsequent testing ...

Action needed to combat food and drink companies' social media marketing to adolescents.

Science.gov (United States)

Williams, Simon

2013-05-01

Reports have shown how behavioural marketing through social media sites is heavily dominated by soft drink and fast food franchises, with additional concern arising due to the direct targeting of this marketing at 13 to 17-year-olds. Dr Simon Williams from Northwestern University, Chicago, USA suggests ways in which the medical community can tackle this threat to public health.

Subcultural grounding of teenage smoking, drinking and use of drugs

OpenAIRE

Rijt, G.A.J. van der; d'Haenens, L.S.J.; Straten, P. van

2003-01-01

This study attempts to establish whether subcultures play a part in shaping the smoking behavior and other substance use among teenagers. Written questionnaires were administered among teenagers from 30 school classes aged 12 to 16 (N 780). Four hypotheses are tested: we expect (1) that teenagers affiliated with counter-cultural styles will have a more positive attitude towards the use of recreational substances, (2) that they are more likely to smoke, drink alcohol, and use soft drugs than m...

What Is Alcohol? And Why Do People Drink? Pamphlet Series.

Science.gov (United States)

Milgram, Gail Gleason

Alcoholic beverages have been used throughout American history but their use has always been controversial. Ethyl alcohol is one of the few alcohols man is able to drink, although it is never full strength. The fermentation process is used to manufacture alcoholic beverages. Wines are made from a variety of fruits. Beer is made from yeast and a…

JPRS Report, Near East & South Asia

Science.gov (United States)

1989-08-28

manufacturing soap , soft drinks, candy, a few plastics products, canned meats, reinforced concrete, olive oil. furniture, cooking oil, milk and dairy products...of mango, citrus, fig, Christ’s- thorn. grape, pomegranate, and guava . as well as date palm suckers. JPRS-NEA-89-057 28 August 1989 SOUTH ASIA 65

Fatores associados ao consumo regular de refrigerante não dietético em adultos de Pelotas, RS Factores asociados al consumo regular de gaseosa no dietética en adultos de Pelotas, Sur de Brasil Factors associated with regular non-diet soft drink intake among adults in Pelotas, Southern Brazil

Directory of Open Access Journals (Sweden)

Airton José Rombaldi

2011-04-01

general desde el del año pasado, cuantas veces tu tomaste gaseosa no dietética?". Las respuestas categorizadas fueron dicotomizadas para fines de análisis. Fue considerado consumo regular de refrigerante no dietético la frecuencia de cinco o más veces por semana. La asociación con variables demográficas, socioeconómicas, conductuales y nutricionales fue analizada por la prueba de chi-cuadrado para heterogeneidad y tendencia linear y el análisis multivariable fue realizado por medio de regresión de Poisson, con variancia robusta. RESULTADOS: Cerca de un quinto de la población adulta de Pelotas (20,4% ingería regularmente gaseosa no dietética. Individuos del sexo masculino (RP 1,50; IC95%: 1,20;2,00, fumadores actuales (RP 1,60; IC 95%: 1,20;2,10 y que consumían semanalmente meriendas (RP 2,10; IC95%: 1,60;2,70 presentaron mayor prevalencia de consumo de gaseosas no dietéticas en el análisis ajustado. El análisis estratificado por sexo mostró que el consumo regular de frutas, legumbres y verduras fue factor protector al consumo de gaseosas entre mujeres (RP 0,50; IC95%: 0,30;0,90. CONCLUSIONES: La frecuencia de consumo regular de gaseosas no dietéticas en la población adulta fue elevada, particularmente entre hombres, jóvenes y fumadores.OBJECTIVE: To assess factors associated with regular intake of non-diet soft drinks among adults. METHODS: Population-based cross-sectional study including 972 adults (aged 20 to 69 in the city of Pelotas, Southern Brazil, conducted in 2006. The frequency of non-diet soft drink intake in the 12 months prior to the study was evaluated by the question: "In general since last , how many times did you have a non-diet soft drink?". The answers were dichotomized for the analysis. Intake of non-diet soft drinks five times or more per week was considered regular intake. The association between the outcome and sociodemographic, behavioral and nutritional variables was tested using the chi-square test for heterogeneity and linear

The potential adverse effect of energy drinks on executive functions in early adolescence

NARCIS (Netherlands)

van Batenburg-Eddes, T.; Lee, N.C.; Weeda, W.D.; Krabbendam, L.; Huizinga, Mariëtte

2014-01-01

Introduction: Manufacturers of energy drinks (EDs) claim their products improve cognitive performance. Young adolescents are in a critical developmental phase. The impact of ED intake on their development is not yet clear. Therefore, we studied the associations of both caffeine intake and ED

High Content of Lead Is Associated with the Softness of Drinking Water and Raised Cardiovascular Morbidity: A Review.

Science.gov (United States)

Bjørklund, Geir; Dadar, Maryam; Chirumbolo, Salvatore; Aaseth, Jan

2018-04-14

Daily ingestion of lead (Pb), even through piped drinking water, has long time been an important issue of concern, attracting for decades research in environmental science and toxicology, and again comes to prominence because of recent high-profile cases of exposure of populations in several countries to Pb-contaminated water. Numerous studies have reported an association between Pb in water and the risk of cardiovascular pathologies. Low levels of magnesium and calcium, i.e., low degree of hardness of the drinking water, may accentuate Pb leaching from water pipes and furthermore increase Pb absorption. This review evaluates the evidence for an association between Pb exposure from drinking water and cardiovascular end points in human populations.

Stretchable Materials for Robust Soft Actuators towards Assistive Wearable Devices

Science.gov (United States)

Agarwal, Gunjan; Besuchet, Nicolas; Audergon, Basile; Paik, Jamie

2016-09-01

Soft actuators made from elastomeric active materials can find widespread potential implementation in a variety of applications ranging from assistive wearable technologies targeted at biomedical rehabilitation or assistance with activities of daily living, bioinspired and biomimetic systems, to gripping and manipulating fragile objects, and adaptable locomotion. In this manuscript, we propose a novel two-component soft actuator design and design tool that produces actuators targeted towards these applications with enhanced mechanical performance and manufacturability. Our numerical models developed using the finite element method can predict the actuator behavior at large mechanical strains to allow efficient design iterations for system optimization. Based on two distinctive actuator prototypes’ (linear and bending actuators) experimental results that include free displacement and blocked-forces, we have validated the efficacy of the numerical models. The presented extensive investigation of mechanical performance for soft actuators with varying geometric parameters demonstrates the practical application of the design tool, and the robustness of the actuator hardware design, towards diverse soft robotic systems for a wide set of assistive wearable technologies, including replicating the motion of several parts of the human body.

[The historic study on the health drink-especially on the origin of health drink and the formation of its market-].

Science.gov (United States)

Ohe, H; Harima, S; Matsumoto, Y

1995-01-01

The health drink is oral liquids which are classified as elixirs or limonades and so on, which are peculiar to Japan and differ from other liquids to glass a dose of drug. It has mainly been divided into two classes by glassed volume (dosage) in the bottle. One class is the drink tonic which is the capacity of 100 ml and another is the mini-drink tonic which is 50 ml and less. In addition, oral liquid glassed with an ampule is called the ampule tonic. Such drugs were thought to appear after World War II and have been widely known since 1960. However, tonics which had consisted of recipies like the present health drink were shown to exist before World War II. Thus, it was considerable that such prescription formulas were also applied to the ampule tonic and drink tonic. On the other hand, one of the important problems with health drugs was how to make their taking easy in its development. Further, it was necessary to add to acid antiseptic and high content of sugar etc., because the liquids generally had been putrescible. It might be one of the reason for their appearances that it was allowed to produced a liquid which was stabler and made its taking easier to be released from the above limit by the introduction of a dose-glassed liquid. In 1960, the ampule tonic quickly became popular and the drink tonic followed. It was probably caused by changes on the standard and style of living involved the enhancements of the labor time, purchasing power and sense on the health and active propaganda of the manufacturers. In this way, the market has satisfactorily expanded. However, because such medicines liked beverages appeared, it was difficult to distinguish their differences since 1965. Therefore, the Ministry of Health and Welfare has performed some administrative guidances. In 1978, it regulated new approval of the production of 100 ml drink tonics, which led to the appearance of the mini-drink tonic. Its market rapidly expanded since 1985. In 1991, its scale reached

Late-Life Drinking Problems: The Predictive Roles of Drinking Level vs. Drinking Pattern.

Science.gov (United States)

Holahan, Charles J; Brennan, Penny L; Schutte, Kathleen K; Holahan, Carole K; Hixon, J Gregory; Moos, Rudolf H

2017-05-01

Research on late-middle-aged and older adults has focused primarily on average level of alcohol consumption, overlooking variability in underlying drinking patterns. The purpose of the present study was to examine the independent contributions of an episodic heavy pattern of drinking versus a high average level of drinking as prospective predictors of drinking problems. The sample comprised 1,107 adults ages 55-65 years at baseline. Alcohol consumption was assessed at baseline, and drinking problems were indexed across 20 years. We used prospective negative binomial regression analyses controlling for baseline drinking problems, as well as for demographic and health factors, to predict the number of drinking problems at each of four follow-up waves (1, 4, 10, and 20 years). Across waves where the effects were significant, a high average level of drinking (coefficients of 1.56, 95% CI [1.24, 1.95]; 1.48, 95% CI [1.11, 1.98]; and 1.85, 95% CI [1.23, 2.79] at 1, 10, and 20 years) and an episodic heavy pattern of drinking (coefficients of 1.61, 95% CI [1.30, 1.99]; 1.61, 95% CI [1.28, 2.03]; and 1.43, 95% CI [1.08, 1.90] at 1, 4, and 10 years) each independently increased the number of drinking problems by more than 50%. Information based only on average consumption underestimates the risk of drinking problems among older adults. Both a high average level of drinking and an episodic heavy pattern of drinking pose prospective risks of later drinking problems among older adults.

Improving Mechanical Properties of Molded Silicone Rubber for Soft Robotics Through Fabric Compositing.

Science.gov (United States)

Wang, Yue; Gregory, Cherry; Minor, Mark A

2018-06-01

Molded silicone rubbers are common in manufacturing of soft robotic parts, but they are often prone to tears, punctures, and tensile failures when strained. In this article, we present a fabric compositing method for improving the mechanical properties of soft robotic parts by creating a fabric/rubber composite that increases the strength and durability of the molded rubber. Comprehensive ASTM material tests evaluating the strength, tear resistance, and puncture resistance are conducted on multiple composites embedded with different fabrics, including polyester, nylon, silk, cotton, rayon, and several blended fabrics. Results show that strong fabrics increase the strength and durability of the composite, valuable in pneumatic soft robotic applications, while elastic fabrics maintain elasticity and enhance tear strength, suitable for robotic skins or soft strain sensors. Two case studies then validate the proposed benefits of the fabric compositing for soft robotic pressure vessel applications and soft strain sensor applications. Evaluations of the fabric/rubber composite samples and devices indicate that such methods are effective for improving mechanical properties of soft robotic parts, resulting in parts that can have customized stiffness, strength, and vastly improved durability.

Economic trade-offs of additive manufacturing integration in injection moulding process chain

DEFF Research Database (Denmark)

Charalambis, Alessandro; Kerbache, Laoucine; Tosello, Guido

2017-01-01

Additive Manufacturing has emerged as an innovative set of novel technologies capable of replacing established manufacturing processes due to fabrication of highly complex parts and its continuous improvements of efficiency and cost effectiveness. This study is based on the idea that through...... the creation of synergies between additive and conventional manufacturing technologies it is possible to achieve greater cost advantages and operational benefits than by substituting injection moulding with additive manufacturing. The analysis presented explores the cost advantages that can be secured when...... additive manufacturing is used to support the fabrication of mould inserts for the product development phase of the injection moulding process chain. This study shows that fabrication of soft tooling by mean of AM is economically convenient with a cost reduction between 80% and 90%. Break-even points...

Manufacturing and testing flexible microfluidic devices with optical and electrical detection mechanisms

NARCIS (Netherlands)

Ivan, M.G.; Vivet, F.; Meinders, E.R.

2010-01-01

Flexible microfluidic devices made of poly(dimethylsiloxane) (PDMS) were manufactured by soft lithography, and tested in detection of ionic species using optical absorption spectroscopy and electrical measurements. PDMS was chosen due to its flexibility and ease of surface modification by exposure

Elasticity and physico-chemical properties during drinking water biofilm formation.

Science.gov (United States)

Abe, Yumiko; Polyakov, Pavel; Skali-Lami, Salaheddine; Francius, Grégory

2011-08-01

Atomic force microscope techniques and multi-staining fluorescence microscopy were employed to study the steps in drinking water biofilm formation. During the formation of a conditioning layer, surface hydrophobic forces increased and the range of characteristic hydrophobic forces diversified with time, becoming progressively complex in macromolecular composition, which in return triggered irreversible cellular adhesion. AFM visualization of 1 to 8 week drinking water biofilms showed a spatially discontinuous and heterogeneous distribution comprising an extensive network of filamentous fungi in which biofilm aggregates were embedded. The elastic modulus of 40-day-old biofilms ranged from 200 to 9000 kPa, and the biofilm deposits with a height >0.5 μm had an elastic modulus water biofilms were composed of a soft top layer and a basal layer with significantly higher elastic modulus values falling in the range of fungal elasticity.

New scale-down methodology from commercial to lab scale to optimize plant-derived soft gel capsule formulations on a commercial scale.

Science.gov (United States)

Oishi, Sana; Kimura, Shin-Ichiro; Noguchi, Shuji; Kondo, Mio; Kondo, Yosuke; Shimokawa, Yoshiyuki; Iwao, Yasunori; Itai, Shigeru

2018-01-15

A new scale-down methodology from commercial rotary die scale to laboratory scale was developed to optimize a plant-derived soft gel capsule formulation and eventually manufacture superior soft gel capsules on a commercial scale, in order to reduce the time and cost for formulation development. Animal-derived and plant-derived soft gel film sheets were prepared using an applicator on a laboratory scale and their physicochemical properties, such as tensile strength, Young's modulus, and adhesive strength, were evaluated. The tensile strength of the animal-derived and plant-derived soft gel film sheets was 11.7 MPa and 4.41 MPa, respectively. The Young's modulus of the animal-derived and plant-derived soft gel film sheets was 169 MPa and 17.8 MPa, respectively, and both sheets showed a similar adhesion strength of approximately 4.5-10 MPa. Using a D-optimal mixture design, plant-derived soft gel film sheets were prepared and optimized by varying their composition, including variations in the mass of κ-carrageenan, ι-carrageenan, oxidized starch and heat-treated starch. The physicochemical properties of the sheets were evaluated to determine the optimal formulation. Finally, plant-derived soft gel capsules were manufactured using the rotary die method and the prepared soft gel capsules showed equivalent or superior physical properties compared with pre-existing soft gel capsules. Therefore, we successfully developed a new scale-down methodology to optimize the formulation of plant-derived soft gel capsules on a commercial scale. Copyright © 2017 Elsevier B.V. All rights reserved.

Fused filament 3D printing of ionic polymer-metal composites for soft robotics

Science.gov (United States)

Carrico, James D.; Leang, Kam K.

2017-04-01

Additive manufacturing techniques are used to create three-dimensional structures with complex shapes and features from polymer and/or metal materials. For example, fused filament three-dimensional (3D) printing utilizes non-electroactive polymers, such as acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA), to build structures and components in a layer-by-layer fashion for a wide variety of applications. Presented here is a summary of recent work on a fused filament 3D-printing technique to create 3D ionic polymer-metal composite (IPMC) structures for applications in soft robotics. The 3D printing technique overcomes some of the limitations of existing manufacturing processes for creating IPMCs, such as limited shapes and sizes and time-consuming manufacturing steps. In the process described, first a precursor material (non-acid Nafion precursor resin) is extruded into a thermoplastic filament for 3D printing. Then, a custom-designed 3D printer is described that utilizes the precursor filament to manufacture custom-shaped structures. Finally, the 3D-printed samples are functionalized by hydrolyzing them in an aqueous solution of potassium hydroxide and dimethyl sulfoxide, followed by application of platinum electrodes. Presented are example 3D-printed single and multi-degree-of-freedom IPMC actuators and characterization results, as well as example soft-robotic devices to demonstrate the potential of this process.

Physicochemical Quality of Drinking Water of Kermanshah Province

Directory of Open Access Journals (Sweden)

Mahfooz Moradi

2013-12-01

Full Text Available Physicochemical quality of drinking water has a direct impact on consumer health and fluoride, nitrite, nitrate, total dissolved solids compounds and pH are their important parameters that have closely relationship with community health. In many cases, source nitrate of water is due to agriculture activities, landfill sites and also potassium nitrate that used in the manufacture of glass, nitrite in form of sodium nitrite used as a food preservative too.

Determination of the elements found in milk powder, infant food and soft drink by neutron activation analysis

International Nuclear Information System (INIS)

Abdul Khalik Haji Wood; Abdul Wahab Abdullah; Md Soot Haji Ahmad

1987-01-01

Three groups of drink and food samples such as milk powder infant food and light drink marketed around Kajand and Kuala Lumpur towns were analysed for their elemental contents using the instrumental neutron activation analysis technique. 17 elements (Al, As, Br, Cl, Ca, I, K, Mg, Mn, Na, Rb, Ti, V, Zn, Fe, Au and Co) were detected. Some of the elements detected are shown on the label of the tin or package and the concentrations given lie within the range mentioned. (author)

[Energy drinks and their contribution to current health concerns for children and adolescents].

Science.gov (United States)

Cichocki, Michał

2012-01-01

Carbonated beverages including energy drinks make up an increasing percentage of energy intake amongst adults as well as children and adolescents. Due to high content of di- or monosaccharides and biologically active compounds (mainly caffeine), their regular intake may involve addictions and potential health risks, including diabetes. Although consumption of energy drinks is usually not recommended by the manufacturers to the children under the age of 16, due to its popularity and unrestricted availability on market energy drinks are easily accessible to younger children. Low awareness of the potential health risks involved with such beverages in society together with unrestricted distribution and advertising requires undertaking general information campaign concerning energy drinks. In this paper a critical review has been made to discuss potential somatic and psychological health risks issue. Moreover, conclusions were supported with the results of the survey conducted among college and high-school adolescents.

Recent Advances in Soft E-Textiles

Directory of Open Access Journals (Sweden)

Kunal Mondal

2018-04-01

Full Text Available E-textiles (electronic textiles are fabrics that possesses electronic counterparts and electrical interconnects knitted into them, offering flexibility, stretchability, and a characteristic length scale that cannot be accomplished using other electronic manufacturing methods currently available. However, knitting is only one of the technologies in e-Textile integration. Other technologies, such as sewing, embroidery, and even single fiber-based manufacture technology, are widely employed in next-generation e-textiles. Components and interconnections are barely visible since they are connected intrinsically to soft fabrics that have attracted the attention of those in the fashion and textile industries. These textiles can effortlessly acclimatize themselves to the fast-changing wearable electronic markets with digital, computational, energy storage, and sensing requirements of any specific application. This mini-review focuses on recent advances in the field of e-textiles and focuses particularly on the materials and their functionalities.

Drinking to our health: Can beverage companies cut calories while maintaining profits?

Science.gov (United States)

Kleiman, Susan; Ng, Shu Wen; Popkin, Barry

2012-01-01

Carbonated soft drinks (CSD) and other beverages make up an increasing percentage of energy intake, and there are rising public health concerns about the links between consumption of sugar-sweetened beverages and weight gain, obesity, and other cardio-metabolic problems. In response, the food and beverage industry claims to be reformulating products, reducing package or portion sizes, and introducing healthier options. Comparative analysis on various changes and their potential effects on public health are needed. We conduct a case study using the two largest and most influential producers of sweetened beverages, The Coca-Cola Company and PepsiCo, who together control 34 percent of the global soft drink market, examining their product portfolios globally and in three critical markets (the US, Brazil, and China) from 2000-2010. On a global basis, total revenues and energy per capita sold increased, yet the average energy density (kilojoules per 100 milliliters) sold declined slightly, suggesting a shift to lower-calorie products. In the US, both total energy per capita and average energy density of beverages sold decreased, while the opposite was true in the developing markets of Brazil and China, with total per capita energy increasing greatly in China and, to a lesser extent, in Brazil. PMID:22070346

Sectoral Innovation Performance in the Food and Drinks Sector. Final Report. Task 1

NARCIS (Netherlands)

Leis, M.

2010-01-01

Food and drinks manufacturing is a very complex sector with a lot of possibilities for improvement and innovation, but also with a variety of challenges in regard to financial and human resources, fragmented consumer interests and concerns, regulations, costs and a balancing act between novelty and

Who drinks where: youth selection of drinking contexts.

Science.gov (United States)

Lipperman-Kreda, Sharon; Mair, Christina F; Bersamin, Melina; Gruenewald, Paul J; Grube, Joel W

2015-04-01

Different drinkers may experience specific risks depending on where they consume alcohol. This longitudinal study examined drinking patterns, and demographic and psychosocial characteristics associated with youth drinking in different contexts. We used survey data from 665 past-year alcohol-using youths (ages 13 to 16 at Wave 1) in 50 midsized California cities. Measures of drinking behaviors and drinking in 7 contexts were obtained at 3 annual time points. Other characteristics included gender, age, race, parental education, weekly disposable income, general deviance, and past-year cigarette smoking. Results of multilevel regression analyses show that more frequent past-year alcohol use was associated with an increased likelihood of drinking at parties and at someone else's home. Greater continued volumes of alcohol (i.e., heavier drinking) was associated with increased likelihood of drinking at parking lots or street corners. Deviance was positively associated with drinking in most contexts, and past-year cigarette smoking was positively associated with drinking at beaches or parks and someone else's home. Age and deviance were positively associated with drinking in a greater number of contexts. The likelihood of youth drinking at parties and someone else's home increased over time, whereas the likelihood of drinking at parking lots/street corners decreased. Also, deviant youths progress to drinking in their own home, beaches or parks, and restaurants/bars/nightclubs more rapidly. The contexts in which youths consume alcohol change over time. These changes vary by individual characteristics. The redistribution of drinking contexts over the early life course may contribute to specific risks associated with different drinking contexts. Copyright © 2015 by the Research Society on Alcoholism.

Nano-Magnets and Additive Manufacturing for Electric Motors

Science.gov (United States)

Misra, Ajay K.

2014-01-01

High power density is required for application of electric motors in hybrid electric propulsion. Potential path to achieve high power density in electric motors include advanced materials, lightweight thermal management, lightweight structural concepts, high power density power electronics, and advanced manufacturing. This presentation will focus on two key technologies for achieving high power density, advanced magnets and additive manufacturing. The maximum energy product in current magnets is reaching their theoretical limits as a result of material and process improvements. Future improvements in the maximum energy product for magnets can be achieved through development of nanocomposite magnets combining the hard magnetic phase and soft magnetic phase at the nanoscale level. The presentation will provide an overview of the current state of development for nanocomposite magnets and the future path for doubling the maximum energy product. The other part of the presentation will focus on the role of additive manufacturing in fabrication of high power density electric motors. The presentation will highlight the potential opportunities for applying additive manufacturing to fabricate electric motors.

Drinking Water - National Drinking Water Clearinghouse

Science.gov (United States)

Savings Septic Unsafe Disposable Wipe Woes FacebookLogo FOCUS AREAS Drinking Water Wastewater Training Security Conservation & Water Efficiency Water We Drink Source Water Protection SORA/COI EPA MOU CartIcon Links Listserv Educators Homeowners Operators Small Systems Drinking Water Read On Tap Latest

Evaluation of Minerals Content of Drinking Water in Malaysia

Science.gov (United States)

Azlan, Azrina; Khoo, Hock Eng; Idris, Mohd Aizat; Ismail, Amin; Razman, Muhammad Rizal

2012-01-01

The drinking and mineral water samples obtained from different geographical locations had concentrations of the selected minerals lower than the standard limits, except for manganese, arsenic, and fluoride. The concentrations of manganese and arsenic in two mineral water samples were slightly higher than the standard international recommended limits. One mineral water sample had a fluoride concentration higher than the standard limits, whereas manganese was not detected in nine drinking and mineral water samples. Most of the selected minerals found in the tap water samples were below the international standard limits, except for iron and manganese. The concentrations of iron and manganese in the tap water samples were higher than the standard limits, which were obtained from one and three of the studied locations, respectively. The potable water obtained from various manufacturers and locations in Peninsular Malaysia is safe for consumption, as the minerals concentrations were below the standard limits prescribed by the Malaysian Food Regulations of 1985. The data obtained may also provide important information related to daily intake of these minerals from drinking water. PMID:22649292

Evaluation of Minerals Content of Drinking Water in Malaysia

Directory of Open Access Journals (Sweden)

Azrina Azlan

2012-01-01

Full Text Available The drinking and mineral water samples obtained from different geographical locations had concentrations of the selected minerals lower than the standard limits, except for manganese, arsenic, and fluoride. The concentrations of manganese and arsenic in two mineral water samples were slightly higher than the standard international recommended limits. One mineral water sample had a fluoride concentration higher than the standard limits, whereas manganese was not detected in nine drinking and mineral water samples. Most of the selected minerals found in the tap water samples were below the international standard limits, except for iron and manganese. The concentrations of iron and manganese in the tap water samples were higher than the standard limits, which were obtained from one and three of the studied locations, respectively. The potable water obtained from various manufacturers and locations in Peninsular Malaysia is safe for consumption, as the minerals concentrations were below the standard limits prescribed by the Malaysian Food Regulations of 1985. The data obtained may also provide important information related to daily intake of these minerals from drinking water.

Evaluation of minerals content of drinking water in Malaysia.

Science.gov (United States)

Azlan, Azrina; Khoo, Hock Eng; Idris, Mohd Aizat; Ismail, Amin; Razman, Muhammad Rizal

2012-01-01

The drinking and mineral water samples obtained from different geographical locations had concentrations of the selected minerals lower than the standard limits, except for manganese, arsenic, and fluoride. The concentrations of manganese and arsenic in two mineral water samples were slightly higher than the standard international recommended limits. One mineral water sample had a fluoride concentration higher than the standard limits, whereas manganese was not detected in nine drinking and mineral water samples. Most of the selected minerals found in the tap water samples were below the international standard limits, except for iron and manganese. The concentrations of iron and manganese in the tap water samples were higher than the standard limits, which were obtained from one and three of the studied locations, respectively. The potable water obtained from various manufacturers and locations in Peninsular Malaysia is safe for consumption, as the minerals concentrations were below the standard limits prescribed by the Malaysian Food Regulations of 1985. The data obtained may also provide important information related to daily intake of these minerals from drinking water.

Soft Body Armor: An Overview of Materials, Manufacturing, Testing, and Ballistic Impact Dynamics

Science.gov (United States)

2011-08-01

Atlantic Treaty Organization NIJ National Institute of Justice OTV Outer tactical vest PBI Polybenzimidazole PBO Polybenzobisoxazole PET ...grenades and mortar rounds, is performed in accordance with the North Atlantic Treaty Organization (NATO) Standardization Agreement (STANAG) 2920.6...LEVELS IN SOFT BODY ARMOR The design of woven fabrics for armor applications is complex because it requires an understanding of the related

Stricter School Soda Limits Offered: Facing Lawsuit Threat, Beverage Industry Vows to Curb High-Calorie Drinks

Science.gov (United States)

Samuels, Christina A.

2006-01-01

The soft-drink industry vowed to voluntarily curb selling sugary sodas and other high-calorie beverages in schools, a move that was taken under threat of litigation by critics who see the industry as a prime culprit in a national obesity crisis. The promise offered no guarantee that schools would go along with the restrictions, though many…

Optimization of chemical composition in the manufacturing process of flotation balls based on intelligent soft sensing

Directory of Open Access Journals (Sweden)

Dučić Nedeljko

2016-01-01

Full Text Available This paper presents an application of computational intelligence in modeling and optimization of parameters of two related production processes - ore flotation and production of balls for ore flotation. It is proposed that desired chemical composition of flotation balls (Mn=0.69%; Cr=2.247%; C=3.79%; Si=0.5%, which ensures minimum wear rate (0.47 g/kg during copper milling is determined by combining artificial neural network (ANN and genetic algorithm (GA. Based on the results provided by neuro-genetic combination, a second neural network was derived as an ‘intelligent soft sensor’ in the process of white cast iron production. The proposed ANN 12-16-12-4 model demonstrated favourable prediction capacity, and can be recommended as a ‘intelligent soft sensor’ in the alloying process intended for obtaining favourable chemical composition of white cast iron for production of flotation balls. In the development of intelligent soft sensor data from the two real production processes was used. [Projekat Ministarstva nauke Republike Srbije, br. TR35037 i br. TR35015

COFFEE, TEA AND SUGAR-SWEETENED CARBONATED SOFT DRINK INTAKE AND PANCREATIC CANCER RISK: A POOLED ANALYSIS OF 14 COHORT STUDIES

Science.gov (United States)

Genkinger, Jeanine M.; Li, Ruifeng; Spiegelman, Donna; Anderson, Kristin E.; Albanes, Demetrius; Bergkvist, Leif; Bernstein, Leslie; Black, Amanda; van den Brandt, Piet A.; English, Dallas R.; Freudenheim, Jo L.; Fuchs, Charles S.; Giles, Graham G.; Giovannucci, Edward; Goldbohm, R. Alexandra; Horn-Ross, Pamela L.; Jacobs, Eric J.; Koushik, Anita; Männistö, Satu; Marshall, James R.; Miller, Anthony B.; Patel, Alpa V.; Robien, Kim; z, Thomas E.; Schairer, Catherine; Stolzenberg-Solomon, Rachael; Wolk, Alicja; Ziegler, Regina G.; Smith-Warner, Stephanie A.

2011-01-01

BACKGROUND Coffee has been hypothesized to have pro- and anti-carcinogenic properties, while tea may contain anti-carcinogenic compounds. Studies assessing coffee intake and pancreatic cancer risk have yielded mixed results, while findings for tea intake have mostly been null. Sugar-sweetened carbonated soft drink (abbreviated as SSB) intake has been associated with higher circulating levels of insulin, which may promote carcinogenesis. Few prospective studies have examined SSB intake and pancreatic cancer risk; results have been heterogeneous. METHODS In this pooled analysis from 14 prospective cohort studies, 2,185 incident pancreatic cancer cases were identified among 853,894 individuals during follow-up. Multivariate (MV) study-specific relative risks (RR) and 95% confidence intervals (CI) were calculated using Cox proportional hazards models and then pooled using a random effects model. RESULTS No statistically significant associations were observed between pancreatic cancer risk and intake of coffee (MVRR=1.10, 95% CI=0.81-1.48 comparing ≥900 to 0.05). These associations were consistent across levels of sex, smoking status and body mass index. When modeled as a continuous variable, a positive association was evident for SSB (MVRR=1.06, 95% CI=1.02-1.12). CONCLUSION AND IMPACT Overall, no associations were observed for intakes of coffee or tea during adulthood and pancreatic cancer risk. Although we were only able to examine modest intake of SSB, there was a suggestive, modest positive association for risk of pancreatic cancer for intakes of SSB. PMID:22194529

Drinking motives

NARCIS (Netherlands)

Jacob Rosendahl; Lenka van Riemsdijk; Klaus Grunert; Johan van Berkel

2013-01-01

Chapter 8 in Comsumption Culture in Europe. This chapter presents an analysis of what consumer in Europe drink and why they drink what they drink. The concept of drinking motives is developed and defined, and analysis of data on drinking motives shows that these can be grouped into two major

Neutron-induced soft errors in CMOS circuits

International Nuclear Information System (INIS)

Hazucha, P.

1999-01-01

The subject of this thesis is a systematic study of soft errors occurring in CMOS integrated circuits when being exposed to radiation. The vast majority of commercial circuits operate in the natural environment ranging from the sea level to aircraft flight altitudes (less than 20 km), where the errors are caused mainly by interaction of atmospheric neutrons with silicon. Initially, the soft error rate (SER) of a static memory was measured for supply voltages from 2V to 5V when irradiated by 14 MeV and 100 MeV neutrons. Increased error rate due to the decreased supply voltage has been identified as a potential hazard for operation of future low-voltage circuits. A novel methodology was proposed for accurate SER characterization of a manufacturing process and it was validated by measurements on a 0.6 μm process and 100 MeV neutrons. The methodology can be applied to the prediction of SER in the natural environment

Cost-benefit analysis of central softening for production of drinking water.

Science.gov (United States)

Van der Bruggen, B; Goossens, H; Everard, P A; Stemgée, K; Rogge, W

2009-01-01

Softening drinking water before distribution yields advantages with environmental impact, such as lower household products consumption, less scaling in piping and machines, and the avoidance of decentralized, domestic softeners. Central softening is under consideration in Flanders by the largest water supplier, VMW (Dutch acronym for "Flemish Company for Water Supply"), to deliver soft (15 degrees F) water to their customers. A case study is presented for a region with hard water (47 degrees F). The chosen technique is the pellet reactor, based on precipitation of CaCO(3) by NaOH addition. This softening operation has possibly large impact on the environment and the water consumption pattern. A cost-benefit analysis has been made to estimate the added value of central softening, by investigating the impact on the drinking water company, on their customers, on employment, on environment, on health, etc. The analysis for the region of study revealed benefits for customers which were higher than the costs for the drinking water company. However, pricing of drinking water remains an important problem. A sensitivity analysis of these results has also been made, to evaluate the impact of important hypothesis, and to be able to expand this study to other regions. The conclusions for this part show that softening is beneficial if water hardness is to be decreased by at least 5 degrees F.

Problematic Drinking Among Postgraduate Students: Binge Drinking, Prepartying, and Mixing Alcohol With Energy Drinks.

Science.gov (United States)

Rutledge, Patricia C; Bestrashniy, Jessica R B M; Nelson, Toben F

2016-07-02

Although problematic alcohol use has been studied extensively in undergraduate students, little is known about problematic drinking among postgraduate students. This study examined binge drinking, prepartying, and mixing alcohol with energy drinks to determine: (1) the extent to which postgraduate students engage in these drinking behaviors, (2) how postgraduate students differ from undergraduate students in these behaviors, and (3) the demographic risk factors for these behaviors in postgraduate (and undergraduate) students. This study utilized data from n = 695 students (n = 298 postgraduate; n = 397 undergraduate) who participated in the Healthy Minds Study at a large, public university in the Midwestern US. Past-two-week binge drinking, past-year and past-30-day prepartying, and past-30-day mixing alcohol with energy drinks were reported by 26.2%, 28.6%, 14.9%, and 8.1% of postgraduate students, respectively. Multivariate analyses indicated that postgraduate status was a significant negative predictor of binge drinking and prepartying, and that status interacted with age in predicting prepartying such that the effect of age on prepartying was negative for postgraduate students and nonsignificant for undergraduates. Age was a significant negative predictor of mixing alcohol with energy drinks for all students. This study makes a unique contribution to the literature by providing information on problematic drinking in postgraduate students. Although there was evidence of "maturing out," a substantial number of postgraduate students were found to engage in binge drinking and prepartying, and a not insubstantial number of them were found to mix alcohol with energy drinks.

Development of artificial soft rock

International Nuclear Information System (INIS)

Kishi, Kiyoshi

1995-01-01

When foundation base rocks are deeper than the level of installing structures or there exist weathered rocks and crushed rocks in a part of base rocks, often sound artificial base rocks are made by substituting the part with concrete. But in the construction of Kashiwazaki Kariwa Nuclear Power Station of Tokyo Electric Power Co., Inc., the foundation base rocks consist of mudstone, and the stiffness of concrete is large as compared with the surrounding base rocks. As the quality of the substituting material, the nearly same stiffness as that of the surrounding soft rocks and long term stability are suitable, and the excellent workability and economical efficiency are required, therefore, artificial soft rocks were developed. As the substituting material, the soil mortar that can obtain the physical property values in stable form, which are similar to those of Nishiyama mudstone, was selected. The mechanism of its hardening and the long term stability, and the manufacturing plant are reported. As for its application to the base rocks of Kashiwazaki Kariwa Nuclear Power Station, the verification test at the site and the application to the base rocks for No. 7 plant reactor building and other places are described. (K.I.)

Responsible drinking

Science.gov (United States)

Alcohol use disorder - responsible drinking; Drinking alcohol responsibly; Drinking in moderation; Alcoholism - responsible drinking ... 2016. National Institute on Alcohol Abuse and Alcoholism. Alcohol use disorder. www.niaaa.nih.gov/alcohol-health/overview-alcohol- ...

Highly Manufacturable Deep (Sub-Millimeter) Etching Enabled High Aspect Ratio Complex Geometry Lego-Like Silicon Electronics

KAUST Repository

Ghoneim, Mohamed T.; Hussain, Muhammad Mustafa

2017-01-01

A highly manufacturable deep reactive ion etching based process involving a hybrid soft/hard mask process technology shows high aspect ratio complex geometry Lego-like silicon electronics formation enabling free-form (physically flexible

A Can of Bull? Do Energy Drinks Really Provide a Source of Energy?

Science.gov (United States)

Heidemann, Merle; Urquhart, Gerald R.

2005-01-01

This case study involves the biochemical analysis of the components of commonly available energy drinks, which many students purchase at fairly high prices. Students research the ingredients in each product and their physiological role in the human body, and then attempt to match what they learn with the product manufacturers' marketing claims.…

The impact of two fluoropolymer manufacturing facilities on downstream contamination of a river and drinking water resources with per- and polyfluoroalkyl substances.

Science.gov (United States)

Bach, Cristina; Dauchy, Xavier; Boiteux, Virginie; Colin, Adeline; Hemard, Jessica; Sagres, Véronique; Rosin, Christophe; Munoz, Jean-François

2017-02-01

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) are emerging contaminants that have been detected in the environment, biota, and humans. Drinking water is a route of exposure for populations consuming water contaminated by PFAS discharges. This research study reports environmental measurement concentrations, mass flows, and the fate of dozens of PFASs in a river receiving effluents from two fluoropolymer manufacturing facilities. In addition to quantified levels of PFASs using LC- and GC-MS analytical methods, the total amount of unidentified PFASs and precursors was assessed using two complementary analytical methods, absorbable organic fluorine (AOF) determination and oxidative conversion of perfluoroalkyl carboxylic acid (PFCA) precursors. Several dozen samples were collected in the river (water and sediment) during four sampling campaigns. In addition, samples were collected in two well fields and from the outlet of the drinking water treatment plants after chlorination. We estimated that 4295 kg PFHxA, 1487 kg 6:2FTSA, 965 kg PFNA, 307 kg PFUnDA, and 14 kg PFOA were discharged in the river by the two facilities in 2013. High concentrations (up to 176 ng/g dw) of odd long-chain PFASs (PFUnDA and PFTrDA) were found in sediment samples. PFASs were detected in all 15 wells, with concentrations varying based on the location of the well in the field. Additionally, the presence of previously discharged PFASs was still measurable. Significant discrepancies between PFAS concentration profiles in the wells and in the river suggest an accumulation and transformation of PFCA precursors in the aquifer. Chlorination had no removal efficiency and no unidentified PFASs were detected in the treated water with either complementary analytical method. Although the total PFAS concentrations were high in the treated water, ranging from 86 to 169 ng/L, they did not exceed the currently available guideline values.

Soft Ultrathin Electronics Innervated Adaptive Fully Soft Robots.

Science.gov (United States)

Wang, Chengjun; Sim, Kyoseung; Chen, Jin; Kim, Hojin; Rao, Zhoulyu; Li, Yuhang; Chen, Weiqiu; Song, Jizhou; Verduzco, Rafael; Yu, Cunjiang

2018-03-01

Soft robots outperform the conventional hard robots on significantly enhanced safety, adaptability, and complex motions. The development of fully soft robots, especially fully from smart soft materials to mimic soft animals, is still nascent. In addition, to date, existing soft robots cannot adapt themselves to the surrounding environment, i.e., sensing and adaptive motion or response, like animals. Here, compliant ultrathin sensing and actuating electronics innervated fully soft robots that can sense the environment and perform soft bodied crawling adaptively, mimicking an inchworm, are reported. The soft robots are constructed with actuators of open-mesh shaped ultrathin deformable heaters, sensors of single-crystal Si optoelectronic photodetectors, and thermally responsive artificial muscle of carbon-black-doped liquid-crystal elastomer (LCE-CB) nanocomposite. The results demonstrate that adaptive crawling locomotion can be realized through the conjugation of sensing and actuation, where the sensors sense the environment and actuators respond correspondingly to control the locomotion autonomously through regulating the deformation of LCE-CB bimorphs and the locomotion of the robots. The strategy of innervating soft sensing and actuating electronics with artificial muscles paves the way for the development of smart autonomous soft robots. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Monitoring of metallic contaminants in energy drinks using ICP-MS.

Science.gov (United States)

Kilic, Serpil; Cengiz, Mehmet Fatih; Kilic, Murat

2018-03-09

In this study, an improved method was validated for the determination of some metallic contaminants (arsenic (As), chromium (Cr), cadmium (Cd), lead (Pb), iron (Fe), nickel (Ni), copper (Cu), Mn, and antimony (Sb)) in energy drinks using inductive coupled plasma mass spectrometry (ICP-MS). The validation procedure was applied for the evaluation of linearity, repeatability, recovery, limit of detection, and quantification. In addition, to verify the trueness of the method, it was participated in an interlaboratory proficiency test for heavy metals in soft drink organized by the LGC (Laboratory of the Government Chemist) Standard. Validated method was used to monitor for the determination of metallic contaminants in commercial energy drink samples. Concentrations of As, Cr, Cd, Pb, Fe, Ni, Cu, Mn, and Sb in the samples were found in the ranges of 0.76-6.73, 13.25-100.96, 0.16-2.11, 9.33-28.96, 334.77-937.12, 35.98-303.97, 23.67-60.48, 5.45-489.93, and 0.01-0.42 μg L -1 , respectively. The results were compared with the provisional guideline or parametric values of the elements for drinking waters set by the WHO (World Health Organization) and EC (European Commission). As, Cd, Cu, and Sb did not exceed the WHO and EC provisional guideline or parametric values. However, the other elements (Cr, Pb, Fe, Ni, and Mn) were found to be higher than their relevant limits at various levels.

Drinking to our health: can beverage companies cut calories while maintaining profits?

Science.gov (United States)

Kleiman, S; Ng, S W; Popkin, B

2012-03-01

Carbonated soft drinks and other beverages make up an increasing percentage of energy intake, and there are rising public health concerns about the links between consumption of sugar-sweetened beverages and weight gain, obesity, and other cardiometabolic problems. In response, the food and beverage industry claims to be reformulating products, reducing package or portion sizes and introducing healthier options. Comparative analysis on various changes and their potential effects on public health are needed. We conduct a case study using the two largest and most influential producers of sweetened beverages, The Coca-Cola Company and PepsiCo Inc., who together control 34% of the global soft drink market, examining their product portfolios globally and in three critical markets (the United States, Brazil and China) from 2000 to 2010. On a global basis, total revenues and energy per capita sold increased, yet the average energy density (kJ 100 mL(-1) ) sold declined slightly, suggesting a shift to lower-calorie products. In the United States, both total energy per capita and average energy density of beverages sold decreased, while the opposite was true in the developing markets of Brazil and China, with total per capita energy increasing greatly in China and, to a lesser extent, in Brazil. © 2011 The Authors. obesity reviews © 2011 International Association for the Study of Obesity.

Influenced but unaware: social influence on alcohol drinking among social acquaintances.

Science.gov (United States)

Dallas, Rebecca; Field, Matt; Jones, Andrew; Christiansen, Paul; Rose, Abi; Robinson, Eric

2014-05-01

Drinking partners may be influenced by each other's alcohol consumption. However, these effects have only been shown in artificially created social pairings and typically among same-sex young adults. Here, we test whether similarly strong influence effects occur among "real" pairs of social acquaintances (friends and partners) and whether people are aware of this influence on their alcohol consumption. Forty-six pairs of social acquaintances aged between 19 and 60 years old participated in a between-subjects experiment, in a semi-naturalistic bar laboratory setting. One member of each pair (the confederate) was randomly selected and asked to consume only alcoholic (alcohol condition) or soft drinks (nonalcohol condition), while the pair completed a game together in a bar setting. The other participant (naïve) was unaware of these drinking instructions. Postconsumption, we measured the extent to which naïve participants believed that their partner had influenced their own drinking behavior. A large effect of condition on alcohol consumption was observed, χ² (2) = 15.8, p < 0.001, Cramer's V = 0.59, whereby the number of alcoholic drinks selected by naïve participants in the alcohol confederate condition was significantly greater than in the nonalcohol confederate condition. The majority of naïve participants (81%) also tended to be unaware that their partner had influenced their alcohol consumption. Social acquaintances are influenced by each other's alcohol consumption and may not be aware of this influence on their behavior. Copyright © 2014 by the Research Society on Alcoholism.

Peer influence on snacking behavior in adolescence

OpenAIRE

Wouters, E.J.M.; Geenen, Rinie; Kremers, Stef; Dagnelie, Pieter; Larsen, Junilla

2010-01-01

To examine the association of adolescents' snack and soft drink consumption with friendship group snack and soft drink consumption, availability of snacks and soft drinks at school, and personal characteristics, snack and soft drink consumption was assessed in 749 adolescents (398 girls, 351 boys, age 12.4 - 17.6 years), and their friends, and snack and soft drink availability at schools was measured. In regression analysis, consumption by friends, snack and soft drink availability within sch...

New England's Drinking Water | Drinking Water in New ...

Science.gov (United States)

2017-07-06

Information on Drinking Water in New England. Major Topics covered include: Conservation, Private Wells, Preventing Contamination, Drinking Water Sources, Consumer Confidence Reports, and Drinking Water Awards.

Energy drink use, problem drinking and drinking motives in a diverse sample of Alaskan college students

Directory of Open Access Journals (Sweden)

Monica C. Skewes

2013-08-01

Full Text Available Background. Recent research has identified the use of caffeinated energy drinks as a common, potentially risky behaviour among college students that is linked to alcohol misuse and consequences. Research also suggests that energy drink consumption is related to other risky behaviours such as tobacco use, marijuana use and risky sexual activity. Objective. This research sought to examine the associations between frequency of energy drink consumption and problematic alcohol use, alcohol-related consequences, symptoms of alcohol dependence and drinking motives in an ethnically diverse sample of college students in Alaska. We also sought to examine whether ethnic group moderated these associations in the present sample of White, Alaska Native/American Indian and other ethnic minority college students. Design. A paper-and-pencil self-report questionnaire was completed by a sample of 298 college students. Analysis of covariance (ANCOVA was used to examine the effects of energy drink use, ethnic group and energy drink by ethnic group interactions on alcohol outcomes after controlling for variance attributed to gender, age and frequency of binge drinking. Results. Greater energy drink consumption was significantly associated with greater hazardous drinking, alcohol consequences, alcohol dependence symptoms, drinking for enhancement motives and drinking to cope. There were no main effects of ethnic group, and there were no significant energy drink by ethnic group interactions. Conclusion. These findings replicate those of other studies examining the associations between energy drink use and alcohol problems, but contrary to previous research we did not find ethnic minority status to be protective. It is possible that energy drink consumption may serve as a marker for other health risk behaviours among students of various ethnic groups.

Underage Drinking

Science.gov (United States)

... 10/17. Drinking patterns vary by age and gender As adolescents get older, they tend to drink ... in risky behavior, including drinking and driving, sexual activity (such as unprotected ... the risk of physical and sexual assault Underage youth who drink are ...

Design of a high power TM01 mode launcher optimized for manufacturing by milling

Energy Technology Data Exchange (ETDEWEB)

Dal Forno, Massimo [SLAC National Accelerator Lab., Menlo Park, CA (United States)

2016-12-15

Recent research on high-gradient rf acceleration found that hard metals, such as hard copper and hard copper-silver, have lower breakdown rate than soft metals. Traditional high-gradient accelerating structures are manufactured with parts joined by high-temperature brazing. The high temperature used in brazing makes the metal soft; therefore, this process cannot be used to manufacture structures out of hard metal alloys. In order to build the structure with hard metals, the components must be designed for joining without high-temperature brazing. One method is to build the accelerating structures out of two halves, and join them by using a low-temperature technique, at the symmetry plane along the beam axis. The structure has input and output rf power couplers. We use a TM01 mode launcher as a rf power coupler, which was introduced during the Next Linear Collider (NLC) work. The part of the mode launcher will be built in each half of the structure. This paper presents a novel geometry of a mode launcher, optimized for manufacturing by milling. The coupler was designed for the CERN CLIC working frequency f = 11.9942 GHz; the same geometry can be scaled to any other frequency.

Nutritional value of milk drinks for young children

OpenAIRE

German Federal Institute for Risk Assessment

2011-01-01

Milk drinks for young children, i.e. toddlers, available on the market are referred to as toddler milk or children’s milk. The manufacturers of these products often advertise these to be – in contrast to cow milk – adjusted to serve the specific nutritional needs of young children. These products thus often contain less protein than cow milk, allegedly in order to counteract obesity later in life. Instead they contain more vitamins and minerals, which is then said to be necessary for the adeq...

Propagation of measurement accuracy to biomass soft-sensor estimation and control quality.

Science.gov (United States)

Steinwandter, Valentin; Zahel, Thomas; Sagmeister, Patrick; Herwig, Christoph

2017-01-01

In biopharmaceutical process development and manufacturing, the online measurement of biomass and derived specific turnover rates is a central task to physiologically monitor and control the process. However, hard-type sensors such as dielectric spectroscopy, broth fluorescence, or permittivity measurement harbor various disadvantages. Therefore, soft-sensors, which use measurements of the off-gas stream and substrate feed to reconcile turnover rates and provide an online estimate of the biomass formation, are smart alternatives. For the reconciliation procedure, mass and energy balances are used together with accuracy estimations of measured conversion rates, which were so far arbitrarily chosen and static over the entire process. In this contribution, we present a novel strategy within the soft-sensor framework (named adaptive soft-sensor) to propagate uncertainties from measurements to conversion rates and demonstrate the benefits: For industrially relevant conditions, hereby the error of the resulting estimated biomass formation rate and specific substrate consumption rate could be decreased by 43 and 64 %, respectively, compared to traditional soft-sensor approaches. Moreover, we present a generic workflow to determine the required raw signal accuracy to obtain predefined accuracies of soft-sensor estimations. Thereby, appropriate measurement devices and maintenance intervals can be selected. Furthermore, using this workflow, we demonstrate that the estimation accuracy of the soft-sensor can be additionally and substantially increased.

Proposed actions for the US Food and Drug Administration to implement to minimize adverse effects associated with energy drink consumption.

Science.gov (United States)

Thorlton, Janet; Colby, David A; Devine, Paige

2014-07-01

Energy drink sales are expected to reach $52 billion by 2016. These products, often sold as dietary supplements, typically contain stimulants. The Dietary Supplement Protection Act claims an exemplary public health safety record. However, in 2011 the number of emergency department visits related to consumption of energy drinks exceeded 20,000. Nearly half of these visits involved adverse effects occurring from product misuse. Political, social, economic, practical, and legal factors shape the landscape surrounding this issue. In this policy analysis, we examine 3 options: capping energy drink caffeine levels, creating a public education campaign, and increasing regulatory scrutiny regarding the manufacture and labeling of energy drinks. Increased regulatory scrutiny may be in order, especially in light of wrongful death lawsuits related to caffeine toxicity resulting from energy drink consumption.

Perceived peer drinking norms and responsible drinking in UK university settings.

Science.gov (United States)

Robinson, Eric; Jones, Andrew; Christiansen, Paul; Field, Matt

2014-09-01

Heavy drinking is common among students at UK universities. US students overestimate how much their peers drink and correcting this through the use of social norm messages may promote responsible drinking. We tested whether there is an association between perceived campus drinking norms and usual drinking behavior in UK university students and whether norm messages about responsible drinking correct normative misperceptions and increase students' intentions to drink responsibly. 1,020 UK university students took part in an online study. Participants were exposed to one of five message types: a descriptive norm, an injunctive norm, a descriptive and injunctive norm, or one of two control messages. Message credibility was assessed. Afterwards participants completed measures of intentions to drink responsibly and we measured usual drinking habits and perceptions of peer drinking. Perceptions of peer drinking were associated modestly with usual drinking behavior, whereby participants who believed other students drank responsibly also drank responsibly. Norm messages changed normative perceptions, but not in the target population of participants who underestimated responsible drinking in their peers at baseline. Norm messages did not increase intentions to drink responsibly and although based on accurate data, norm messages were not seen as credible. In this UK based study, although perceived social norms about peer drinking were associated with individual differences in drinking habits, campus wide norm messages about responsible drinking did not affect students' intentions to drink more responsibly. More research is required to determine if this approach can be applied to UK settings.

Tunable smart digital structure (SDS) to modularly assemble soft actuators with layered adhesive bonding

Science.gov (United States)

Jin, Hu; Dong, Erbao; Xu, Min; Xia, Qirong; Liu, Shuai; Li, Weihua; Yang, Jie

2018-01-01

Many shape memory alloy (SMA)-based soft actuators have specific composite structures and manufacture processes, and are therefore unique. However, these exclusive characteristics limit their capabilities and applications, so in this article a soft and smart digital structure (SDS) is proposed that acts like a modular unit to assemble soft actuators by a layered adhesive bonding process. The SDS is a fully soft structure that encapsulates a digital skeleton consisting of four groups of parallel and independently actuated SMA wires capable of outputting a four-channel tunable force. The layered adhesive bonding process modularly bonds several SDSs with an elastic backbone to fabricate a layered soft actuator where the elastic backbone is used to recover the SDSs in a cooling process using the SMA wires. Two kinds of SDS-based soft actuators were modularly assembled, an actuator, SDS-I, with a two-dimensional reciprocal motion, and an actuator, SDS-II, capable of bi-directional reciprocal motion. The thermodynamics and phase transformation modeling of the SDS-based actuator were analyzed. Several extensional soft actuators were also assembled by bonding the SDS with an anomalous elastic backbone or modularly assembling the SDS-Is and SDS-IIs. These modularly assembled soft actuators delivered more output channels and a complicated motion, e.g., an actinomorphic soft actuator with four SDS-Is jumps in a series of hierarchical heights and directional movement by tuning the input channels of the SDSs. This result showed that the SDS can modularly assemble multifarious soft actuators with diverse capabilities, steerability and tunable outputs.

Fabrication of wrist-like SMA-based actuator by double smart soft composite casting

Science.gov (United States)

Rodrigue, Hugo; Wei, Wang; Bhandari, Binayak; Ahn, Sung-Hoon

2015-12-01

A new manufacturing method for smart soft composite (SSC) actuators that consists of double casting a SSC actuator to produce an actuator with non-linear shape memory alloy (SMA) wire positioning is proposed. This method is used to manufacture a tube-shaped SSC actuator in which the SMA wires follow the curvature of the tube and is capable of pure-twisting deformations while sustaining a cantilever load. The concept is tested by measuring the maximum twisting angle and a simple control method is proposed to control the twisting angle of the actuator. Then, a soft robotic wrist with a length of 18 cm is built, its load-carrying capability is tested by measuring the cantilever force required for deforming the actuator, and its load-carrying capability during actuation is tested by loading one end with different objects and actuating the actuator. This wrist actuator shows good repeatability, is capable of twisting deformations up to 25° while holding objects weighing 100 g, and can sustain loads above 2 N without undergoing buckling.

Fabrication of wrist-like SMA-based actuator by double smart soft composite casting

International Nuclear Information System (INIS)

Rodrigue, Hugo; Wei, Wang; Bhandari, Binayak; Ahn, Sung-Hoon

2015-01-01

A new manufacturing method for smart soft composite (SSC) actuators that consists of double casting a SSC actuator to produce an actuator with non-linear shape memory alloy (SMA) wire positioning is proposed. This method is used to manufacture a tube-shaped SSC actuator in which the SMA wires follow the curvature of the tube and is capable of pure-twisting deformations while sustaining a cantilever load. The concept is tested by measuring the maximum twisting angle and a simple control method is proposed to control the twisting angle of the actuator. Then, a soft robotic wrist with a length of 18 cm is built, its load-carrying capability is tested by measuring the cantilever force required for deforming the actuator, and its load-carrying capability during actuation is tested by loading one end with different objects and actuating the actuator. This wrist actuator shows good repeatability, is capable of twisting deformations up to 25° while holding objects weighing 100 g, and can sustain loads above 2 N without undergoing buckling. (paper)

3D printing of concentrated emulsions into multiphase biocompatible soft materials.

Science.gov (United States)

Sommer, Marianne R; Alison, Lauriane; Minas, Clara; Tervoort, Elena; Rühs, Patrick A; Studart, André R

2017-03-01

3D printing via direct ink writing (DIW) is a versatile additive manufacturing approach applicable to a variety of materials ranging from ceramics over composites to hydrogels. Due to the mild processing conditions compared to other additive manufacturing methods, DIW enables the incorporation of sensitive compounds such as proteins or drugs into the printed structure. Although emulsified oil-in-water systems are commonly used vehicles for such compounds in biomedical, pharmaceutical, and cosmetic applications, printing of such emulsions into architectured soft materials has not been fully exploited and would open new possibilities for the controlled delivery of sensitive compounds. Here, we 3D print concentrated emulsions into soft materials, whose multiphase architecture allows for site-specific incorporation of both hydrophobic and hydrophilic compounds into the same structure. As a model ink, concentrated emulsions stabilized by chitosan-modified silica nanoparticles are studied, because they are sufficiently stable against coalescence during the centrifugation step needed to create a bridging network of droplets. The resulting ink is ideal for 3D printing as it displays high yield stress, storage modulus and elastic recovery, through the formation of networks of droplets as well as of gelled silica nanoparticles in the presence of chitosan. To demonstrate possible architectures, we print biocompatible soft materials with tunable hierarchical porosity containing an encapsulated hydrophobic compound positioned in specific locations of the structure. The proposed emulsion-based ink system offers great flexibility in terms of 3D shaping and local compositional control, and can potentially help address current challenges involving the delivery of incompatible compounds in biomedical applications.

Overcoming Barriers to Technology Adoption in Small Manufacturing Enterprises (SMEs)

Science.gov (United States)

2003-06-01

7 3.4 Adopting a Control-System-Modeling Tool.................................................8 3.5 Adapting Ecommerce and Manufacturing Execution...productivity and efficiency improvements. SMEs frequently lack the necessary technical knowledge, staff, and resources to take advantage of new techniques...FEA) tool into their exist- ing 3D CAD system and to optimize their design process to take advantage of the new soft- ware. Based on the results

Four-Dimensional (4D) Printing: Applying Soft Adaptive Materials to Additive Manufacturing

Science.gov (United States)

Li, Zibiao; Loh, Xian Jun

Four-dimensional (4D) printing is an up-and-coming technology for the creation of dynamic devices which have shape changing capabilities or on-demand capabilities over time. Through the printing of adaptive 3D structures, the concept of 4D printing can be realized. Modern manufacturing primarily utilizes direct assembly techniques, limiting the possibility of error correction or instant modification of a structure. Self-building, programmable physical materials are interesting for the automatic and remote construction of structures. Adaptive materials are programmable physical or biological materials which possess shape changing properties or can be made to have simple logic responses. There is immense potential in having disorganized fragments form an ordered construct through physical interactions. However, these are currently limited to only self-assembly at the smallest scale, typically at the nanoscale. The answer to customizable macro-structures is in additive manufacturing, or 3D printing. 3D printing is a 30 years old technology which is beginning to be widely used by consumers. However, the main gripes about this technology are that it is too inefficient, inaccessible, and slow. Cost is also a significant factor in the adoption of this technology. 3D printing has the potential to transform and disrupt the manufacturing landscape as well as our lives. 4D printing seeks to use multi-functional materials in 3D printing so that the printed structure has multiple response capabilities and able to self-assemble on the macroscale. In this paper, we will analyze the early promise of this technology as well as to highlight potential challenges that adopters could face. The primary focus will be to have a look at the application of materials to 3D printing and to show how these materials can be tailored to create responsive customized 4D structures.

Soft Robotics Week

CERN Document Server

Rossiter, Jonathan; Iida, Fumiya; Cianchetti, Matteo; Margheri, Laura

2017-01-01

This book offers a comprehensive, timely snapshot of current research, technologies and applications of soft robotics. The different chapters, written by international experts across multiple fields of soft robotics, cover innovative systems and technologies for soft robot legged locomotion, soft robot manipulation, underwater soft robotics, biomimetic soft robotic platforms, plant-inspired soft robots, flying soft robots, soft robotics in surgery, as well as methods for their modeling and control. Based on the results of the second edition of the Soft Robotics Week, held on April 25 – 30, 2016, in Livorno, Italy, the book reports on the major research lines and novel technologies presented and discussed during the event.

From Soft Sculpture to Soft Robotics: Retracing a Physical Aesthetics of Bio-Morphic Softness

DEFF Research Database (Denmark)

Jørgensen, Jonas

2017-01-01

Soft robotics has in the past decade emerged as a growing subfield of technical robotics research, distinguishable by its bio-inspired design strategies, interest in morphological computation, and interdisciplinary combination of insights from engineering, computer science, biology and material...... science. Recently, soft robotics technology has also started to make its way into art, design, and architecture. This paper attempts to think an aesthetics of softness and the life-like through an artistic tradition deeply imbricated with an interrogation of softness and its physical substrates, namely...... the soft sculpture that started proliferating in the late 1960s. Critical descriptions of these works, interestingly, frequently emphasize their similarities with living organisms and bodies as a central tenet of their aesthetics. The paper seeks to articulate aspects of a contiguity between softness...

The soft notion of China's 'soft power'

OpenAIRE

Breslin, Shaun

2011-01-01

· Although debates over Chinese soft power have increased in\\ud recent years, there is no shared definition of what ‘soft power’\\ud actually means. The definition seems to change depending on\\ud what the observer wants to argue.\\ud · External analyses of soft power often include a focus on\\ud economic relations and other material (hard) sources of power\\ud and influence.\\ud · Many Chinese analyses of soft power focus on the promotion of a\\ud preferred (positive) understanding of China’s inter...

If it looks like a duck and quacks like a duck…: Energy "shots" should be regulated as energy drinks in Canada.

Science.gov (United States)

Hammond, David; Reid, Jessica L

2016-06-27

In 2012, Health Canada transitioned caffeinated energy drinks from Natural Health Product to Food and Drug classification and regulations, implementing temporary guidelines with requirements such as caffeine content limits, mandatory cautionary labelling, and restrictions on health claims. "Energy shots" often contain as much or more caffeine compared to energy drinks and have been associated with a similar number of adverse health events. However, current requirements for energy drinks do not apply to energy shots, which remain classified as "natural health products" on the basis that they are "not consumed or perceived as foods" in the same way as energy drinks. An online survey was conducted with Canadian youth and young adults aged 12-24 years (N = 2040) in October 2014 to examine perceptions of energy shots. Respondents viewed an image of a popular energy shot and were asked which term best described it, with six randomly-ordered options. The vast majority (78.8%) perceived the energy shot as an "energy drink" (vs. "supplement", "vitamin drink", "natural health product", "soft drink" or "food product"). Given consumer perceptions and the similarity in product constituents, there is little basis for regulating energy shots differently from energy drinks; these products should be subject to similar labelling and health warning requirements.

Effect of different polishing systems and drinks on the color stability of resin composite.

Science.gov (United States)

Berber, Asll; Cakir, Filiz Yalcin; Baseren, Meserret; Gurgan, Sevil

2013-07-01

The purpose of this study was to evaluate the color stability of resin composit using different finishing systems and drinks. Composit disks (5 mm diameter, 2 mm thickness) were prepared for each nanofilled composite using a brass mold. The specimens were divided into 5 finishing system groups Mylar strip (Mylar, DuPont, Wilmington, Del., USA), Soft Lex (3M(™) ESPE(™) St. Paul, MN, USA), Enhance (Dentsply-DeTrey GmbHD Konstanz, Germany), Hiluster (KerrHawe, Bioggio, Switzerland), Opti Disc (KerrHawe, Bioggio, Switzerland) and each group was divided into 10 subgroups (n = 10) and stored for 24 hours at 37°C in different drinks water coffee, coffee with sugar, tea, tea with sugar, diet coke, coke, light sour cherry juice or sour cherry juice. Color of all specimens was measured before and after exposure with a spectrophotometer using CIE L*a*b* relative, and color changes (ΔE*) were then calculated. The data were analyzed with a twoway analysis of variance (ANOVA), and mean values were compared by the Tukey HSD test (p = 0.05). For the drinks, the lowest ΔE* values were observed in the water and highest ΔE* values were observed in sour cherry juice. When drinks with and without sugar were compared, all groups with sugar demonstrated a higher color difference than without sugar. For the different finishing systems, Mylar strip group demonstrated significantly highest color change; Enhance groups demonstrated significantly lowest color change. Finishing treatments and storage solutions significantly affect the color stability of resin composite. The presence of sugar in drinks increased the color difference compared to drinks without composit. Polishing techniques and drinking drinks with sugar may affect the color of esthetic restorations.

Results from ITER Vacuum Vessel Sector Manufacturing Development in Europe

International Nuclear Information System (INIS)

Jones, L.

2006-01-01

Significant results have been achieved since the previous SOFT conference, when the manufacturing development work required to prepare for the ITER Vacuum Vessel Sector was described. The contract for the manufacture of a full-size, 20 Ton poloidal part of the inboard section, fabricated according to the ITER reference manufacturing route, including bracing fixtures, welding applications, restraint effects, and fit-up aspects is approaching completion. Since the main aim of the work is to establish the practicability of achieving the tight dimensional tolerances, an accompanying SYSWELD analysis programme has been validation by instrumented welding coupons, and then used for predicting the distortion of the actual construction. A local machining tool has been developed to allow the requirement for machining of the cylindrical features at a late stage of manufacture. Experimental and analytical work has also been carried out to establish the possibility of 3-D cold-forming large sections of walls of the VV. A manufacturing programme to validate an alternative method of fabricating parts of the double-walled VV, utilising e-beam welding only and avoiding the quality issues of the one-sided access and inspection of the closing welds is presented. This paper describes the results of the manufacturing development programme and the future activities. (author)

Symposium on the research field of soft robotics

CERN Document Server

Albu-Schäffer, Alin; Brock, Oliver; Raatz, Annika; Soft Robotics : Transferring Theory to Application

2015-01-01

The research areas as well as the knowledge gained for the practical use of robots are growing and expanding beyond manufacturing and industrial automation, making inroads in sectors such as health care and terrain sensing, as well as general assistive systems working in close interaction with humans. In a situation like this, it is necessary for future robot systems to become less stiff and more specialized by taking inspiration from the mechanical compliance and versatility found in natural materials and organisms. At present, a new discipline is emerging in this area, called »Soft Robotics«. It particularly challenges the traditional thinking of engineers, as the confluence of technologies, ranging from new materials, sensors, actuators and production techniques to new design tools, will make it possible to create new systems whose structures are almost completely made of soft materials, which bring about entirely new functions and behaviors, similar in many ways to natural systems. These Proceedings foc...

Performance Simulation and Verification of Vat Photopolymerization Based, Additively Manufactured Injection Molding Inserts with Micro-Features

DEFF Research Database (Denmark)

Mischkot, Michael; Hofstätter, Thomas; Michailidou, Ifigeneia

2017-01-01

Injection molding soft tooling inserts manufactured additively with vat photopolymerization represent a valid technology for prototyping and pilot production of polymer parts. However, a significant drawback is the low heat conductivity of photopolymers influencing cycletime and part quality...

Highly Manufacturable Deep (Sub-Millimeter) Etching Enabled High Aspect Ratio Complex Geometry Lego-Like Silicon Electronics

KAUST Repository

Ghoneim, Mohamed T.

2017-02-01

A highly manufacturable deep reactive ion etching based process involving a hybrid soft/hard mask process technology shows high aspect ratio complex geometry Lego-like silicon electronics formation enabling free-form (physically flexible, stretchable, and reconfigurable) electronic systems.

Centrifugal forming and mechanical properties of silicone-based elastomers for soft robotic actuators

Science.gov (United States)

Kulkarni, Parth

This thesis describes the centrifugal forming and resulting mechanical properties of silicone-based elastomers for the manufacture of soft robotic actuators. This process is effective at removing bubbles that get entrapped within 3D-printed, enclosed molds. Conventional methods for rapid prototyping of soft robotic actuators to remove entrapped bubbles typically involve degassing under vacuum, with open-faced molds that limit the layout of formed parts to raised 2D geometries. As the functionality and complexity of soft robots increase, there is a need to mold complete 3D structures with controlled thicknesses or curvatures on multiples surfaces. In addition, characterization of the mechanical properties of common elastomers for these soft robots has lagged the development of new designs. As such, relationships between resulting material properties and processing parameters are virtually non-existent. One of the goals of this thesis is to provide guidelines and physical insights to relate the design, processing conditions, and resulting properties of soft robotic components to each other. Centrifugal forming with accelerations on the order of 100 g's is capable of forming bubble-free, true 3D components for soft robotic actuators, and resulting demonstrations in this work include an aquatic locomotor, soft gripper, and an actuator that straightens when pressurized. Finally, this work shows that the measured mechanical properties of 3D geometries fabricated within enclosed molds through centrifugal forming possess comparable mechanical properties to vacuumed materials formed from open-faced molds with raised 2D features.

No appetite efficacy of a commercial structured lipid emulsion in minimally processed drinks.

Science.gov (United States)

Smit, H J; Keenan, E; Kovacs, E M R; Wiseman, S A; Mela, D J; Rogers, P J

2012-09-01

Fabuless (Olibra) is a commercially structured lipid emulsion, claimed to be a food ingredient that is effective for food intake and appetite reduction. The present study assessed its efficacy in a yoghurt-based mini-drink undergoing low or minimal food manufacturing (thermal and shear) processes. Study 1: Twenty-four healthy volunteers (16 female, 8 male; age: 18-47 years; body mass index (BMI): 17-28 kg m(-2)) took part in a randomised, placebo-controlled, double-blind parallel crossover trial. Consumption of a minimally processed 'preload' mini-drink (containing two different doses of Fabuless or a control fat) at 2 h after breakfast was followed by appetite and mood ratings, and food intake measured in ad libitum meals at 3 and 7 h post consumption of the preload. Study 2: As Study 1 (16 female, 8 male; age: 20-54 years; BMI: 21-30 kg m(-2)). A chilled, virtually unprocessed, preload breakfast mini-drink (containing minimally processed Fabuless or a control fat) was provided 5 min after a standardised breakfast, followed by appetite and mood ratings, and food intake measured in ad libitum meals at 4 and 8 h post consumption of the preload. The structured lipid emulsion tested had no significant effect on the primary measures of food intake or appetite. Even when exposed to minimal food-manufacturing conditions, Fabuless showed no efficacy on measures of appetite and food intake.

Soft ideal topological space and mixed fuzzy soft ideal topological space

Directory of Open Access Journals (Sweden)

Manash Borah

2019-01-01

Full Text Available In this paper we introduce fuzzy soft ideal and mixed fuzzy soft ideal topological spaces and some properties of this space. Also we introduce fuzzy soft $I$-open set, fuzzy soft $\\alpha$-$I$-open set, fuzzy soft pre-$I$-open set, fuzzy soft semi-$I$-open set and fuzzy soft $\\beta$-$I$-open set and discuss some of their properties.

SoftAR: visually manipulating haptic softness perception in spatial augmented reality.

Science.gov (United States)

Punpongsanon, Parinya; Iwai, Daisuke; Sato, Kosuke

2015-11-01

We present SoftAR, a novel spatial augmented reality (AR) technique based on a pseudo-haptics mechanism that visually manipulates the sense of softness perceived by a user pushing a soft physical object. Considering the limitations of projection-based approaches that change only the surface appearance of a physical object, we propose two projection visual effects, i.e., surface deformation effect (SDE) and body appearance effect (BAE), on the basis of the observations of humans pushing physical objects. The SDE visualizes a two-dimensional deformation of the object surface with a controlled softness parameter, and BAE changes the color of the pushing hand. Through psychophysical experiments, we confirm that the SDE can manipulate softness perception such that the participant perceives significantly greater softness than the actual softness. Furthermore, fBAE, in which BAE is applied only for the finger area, significantly enhances manipulation of the perception of softness. We create a computational model that estimates perceived softness when SDE+fBAE is applied. We construct a prototype SoftAR system in which two application frameworks are implemented. The softness adjustment allows a user to adjust the softness parameter of a physical object, and the softness transfer allows the user to replace the softness with that of another object.

Peer influence on snacking behavior in adolescence

NARCIS (Netherlands)

MD E.J.M. Wouters; Rinie Geenen; Stef Kremers; Pieter Dagnelie; Junilla Larsen

2010-01-01

To examine the association of adolescents' snack and soft drink consumption with friendship group snack and soft drink consumption, availability of snacks and soft drinks at school, and personal characteristics, snack and soft drink consumption was assessed in 749 adolescents (398 girls, 351 boys,

Regional Distribution of Longevity Population and Elements in Drinking Water in Jiangjin District, Chongqing City, China.

Science.gov (United States)

Liu, Yonglin; Yuan, Yuyang; Luo, Kunli

2017-10-25

In order to determine the spatial variation of longevity population and elements contained in the drinking water of longevity region in Jiangjin and investigate the relationship between the elements in drinking water and longevity, population censuses on township level and 98 drinking water samples from Jiangjin District, Chongqing City in West China were collected and analyzed. Population statistics on township level showed that the number of centenarians per 100,000 inhabitants (OC), centenarity index (CI), and number of centenarians per 10,000 over 65-year-old subjects (UC) present obvious geographic distribution properties, generally Central region > Northern region > Southern region (Kruskal-Wallis test, p water (150 mg/L water from longevity township (OC > 7.5) in Jiangjin District, whereas soft water (75 mg/L strontium (Sr) (0.73 mg/L) in drinking water from the longevity township was apparently higher than that of non-longevity township (0.44 mg/L) (Mann-Whitney U test, p = 0.019 water from longevity township were also higher than those of non-longevity township (Mann-Whitney U test, p water might be good for the health and prolong people's life.

Assessment of pattern for consumption and awareness regarding energy drinks among medical students.

Science.gov (United States)

Aslam, Hafiz Muhammad; Mughal, Anum; Edhi, Muhammad Muzzammil; Saleem, Shafaq; Rao, Masood Hussain; Aftab, Anum; Hanif, Maliha; Ahmed, Alina; Khan, Agha Muhammad Hammad

2013-01-01

Energy drink is a type of beverage which contains stimulant drugs chiefly caffeine and marketed as mental and physical stimulator. Coffee, tea, soft drinks and other caffeinated beverages are not considered as energy drinks. Purpose of our study was to evaluate the awareness of medical students regarding energy drinks and their pattern and reason of energy drinks consumption. This was a cross sectional and observational study conducted during the period of January - December 2012 at four Medical Colleges (Dow Medical College, Sindh Medical College, Jinnah Medical College and Liaquat National Medical College) of Karachi, Pakistan. Over all 900 M.B.B.S students were invited to participate after taking written consent but viable questionnaire was submitted by 866 students, estimated response rate of 96%. All data was entered and analyzed through SPSS version 19. Out of 866 participants, majority were females 614 (70.9%) and only 252 (28.5%) were males, with a mean age of 21.43 ± 1.51 years. Energy drinks users were 350 (42.89%) and non users were 516 (59.58%). Only 102 (29.3%) users and 159 (30.7%) non users know the correct definition of Energy drinks. Regarding awareness, mostly user and non users thought that usage of energy drinks had been on rise due to its usefulness in reducing sleep hours [users193 (43.9%), nonusers 247 (56.1%) (p energy drinks by non-users were "awareness from its side effects" 247 (47.8%) and "have no specific reason" 265 (51.3%). Most common side effects reported by users were fatigue 111 (31.7%) and weight gain 102 (29.4%). In sum, the fact that despite serious side effects of weight gaining and fatigue, practice of consuming energy drinks is highly prevalent among medical students, particularly because they are ever ready to boost their energy level and reduce sleep hours due to stress of exams and projects. This warrants the creation of continued public health awareness about the appropriate use of caffeinated beverages, their

Binge Drinking

Medline Plus

Full Text Available ... prepared for different audiences including, children, parents, and public health professionals. More > Binge Drinking (4:23) Recommend on ... More Information Vital Signs Binge Drinking Information Alcohol & Public Health Binge Drinking Factsheet Effective Prevention Strategies Send Us ...

Drinking games and contextual factors of 21st birthday drinking.

Science.gov (United States)

Neighbors, Clayton; Rodriguez, Lindsey M; Rinker, Dipali V; DiBello, Angelo M; Young, Chelsie M; Chen, Chun-Han

2014-09-01

21st birthday celebrations are among the highest risks for alcohol use throughout emerging adulthood and celebrants often experience a range of alcohol-related consequences. The present research considered what happens when drinking games are paired with an already high-risk event (i.e., 21st birthday celebrations) and how drinking games compare with other contextual factors on 21st birthdays. Approximately four days after turning 21, 1124 college students (55% women) completed an online survey assessing alcohol use and related consequences experienced during their birthday celebrations. Participants were also asked whether drinking games and other contextual factors were associated with their celebrations. Overall, 18% of participants reported playing drinking games during their 21st birthday celebrations. These individuals reported consuming more alcohol, had higher estimated BACs, and experienced more negative consequences than those who did not play drinking games. The association between playing drinking games and alcohol use and negative consequences was stronger for men. The effect of drinking games on negative consequences was mediated through elevated BAC levels. Receiving bar specials, having drinks purchased, playing drinking games, and loud music were uniquely and significantly associated with all alcohol outcomes. Together, these results suggest that drinking games are part of a larger context of risk contributing to extreme drinking on 21st birthdays. Furthermore, these results will help to facilitate interventions that are more individually tailored to target specific contextual risks, behaviors, and events.

Polymer structure-property requirements for stereolithographic 3D printing of soft tissue engineering scaffolds.

Science.gov (United States)

Mondschein, Ryan J; Kanitkar, Akanksha; Williams, Christopher B; Verbridge, Scott S; Long, Timothy E

2017-09-01

This review highlights the synthesis, properties, and advanced applications of synthetic and natural polymers 3D printed using stereolithography for soft tissue engineering applications. Soft tissue scaffolds are of great interest due to the number of musculoskeletal, cardiovascular, and connective tissue injuries and replacements humans face each year. Accurately replacing or repairing these tissues is challenging due to the variation in size, shape, and strength of different types of soft tissue. With advancing processing techniques such as stereolithography, control of scaffold resolution down to the μm scale is achievable along with the ability to customize each fabricated scaffold to match the targeted replacement tissue. Matching the advanced manufacturing technique to polymer properties as well as maintaining the proper chemical, biological, and mechanical properties for tissue replacement is extremely challenging. This review discusses the design of polymers with tailored structure, architecture, and functionality for stereolithography, while maintaining chemical, biological, and mechanical properties to mimic a broad range of soft tissue types. Copyright © 2017 Elsevier Ltd. All rights reserved.

Soft Neutrosophic Bi-LA-semigroup and Soft Neutrosophic N-LA-seigroup

Directory of Open Access Journals (Sweden)

Mumtaz Ali

2014-09-01

Full Text Available Soft set theory is a general mathematical tool for dealing with uncertain, fuzzy, not clearly defined objects. In this paper we introduced soft neutrosophic biLA-semigroup,soft neutosophic sub bi-LA-semigroup, soft neutrosophic N -LA-semigroup with the discuission of some of their characteristics. We also introduced a new type of soft neutrophic bi-LAsemigroup, the so called soft strong neutrosophic bi-LAsemigoup which is of pure neutrosophic character. This is also extend to soft neutrosophic strong N-LA-semigroup. We also given some of their properties of this newly born soft structure related to the strong part of neutrosophic theory.

Energy Drinks

Science.gov (United States)

... R S T U V W X Y Z Energy Drinks Share: © Thinkstock Energy drinks are widely promoted as products that increase ... people has been quite effective. Next to multivitamins, energy drinks are the most popular dietary supplement consumed ...

College drinking problems and social anxiety: The importance of drinking context.

Science.gov (United States)

Terlecki, Meredith A; Ecker, Anthony H; Buckner, Julia D

2014-06-01

Social anxiety more than quadruples the risk of developing an alcohol use disorder, yet it is inconsistently linked to heavy alcohol use. Elucidation of the relation between social anxiety and alcohol use is an important next step in treating and preventing risky drinking. College students routinely face potentially anxiety-provoking social situations (e.g., meeting new people) and socially anxious undergraduates are especially vulnerable to alcohol-related impairment. Drinking to cope with social anxiety is thought to reinforce alcohol use, yet research on coping-motivated drinking among socially anxious students has yielded inconsistent findings. Further, undergraduate drinking varies by drinking context, yet the role of context in drinking behaviors among socially anxious individuals remains unclear. The current study sought to examine the relationship of social anxiety and drinking quantity in specific drinking contexts among undergraduates (N = 611). We also evaluated whether relevant drinking contexts mediated the relationship between social anxiety and alcohol-related problems. Clinically elevated social anxiety was related to heavier consumption in negative emotion (e.g., feeling sad or angry) and personal/intimate (e.g., before sexual intercourse) contexts, but not social/convivial contexts (e.g., parties, bars). Quantity of alcohol consumed in negative emotion and personal/intimate contexts mediated the relationship between social anxiety and drinking problem severity. Drinking in personal/intimate contexts demonstrated a unique mediational role. Findings suggest that heavy drinking in particular contexts (especially personal/intimate and negative emotion) may play an important role in drinking problems among socially anxious individuals.

Association between sweet drink intake and adiposity in Danish children participating in a long-term intervention study

DEFF Research Database (Denmark)

Jensen, B.W.; Nielsen, B.M.; Husby, I.

2013-01-01

: To assess the association between sweet drink intake at age 6 and 9 years and the subsequent 3- to 7-year changes in body mass index (BMI) and sum of four skin-folds (Σ4SF). METHODS: Information on sweet drink intake (7 days food record) and physical activity (accelerometer) was obtained at age 6 years (n......BACKGROUND: In some previous studies direct associations between intake of soft drinks, sugar-sweetened beverages and adiposity have been reported. The majority of these studies were, however, conducted in the USA and it is uncertain if the results are applicable to non-US countries. OBJECTIVE...... = 366) [Correction made here after initial online publication.] and 9 years (n = 269). Weight, height and Σ4SF were measured at age 6, 9 and 13 years. Additional information on socio-economic status, maternal BMI and pubertal status was obtained. RESULTS: No associations were observed between sweet...

Membrane manufacture for peptide separations

KAUST Repository

Kim, Dooli; Salazar Moya, Octavio Ruben; Nunes, Suzana Pereira

2016-01-01

Nanostructured polymeric membranes are key tools in biomedical applications such as hemodialysis, protein separations, in the food industry, and drinking water supply from seawater. Despite of the success in different separation processes, membrane manufacture itself is at risk, since the most used solvents are about to be banned in many countries due to environmental and health issues. We propose for the first time the preparation of polyethersulfone membranes based on dissolution in the ionic liquid 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM]DEP). We obtained a series of membranes tailored for separation of solutes with molecular weight of 30, 5, 1.3, and 1.25 kg mol-1 with respective water permeances of 140, 65, 30 and 20 Lm-2h-1bar-1. We demonstrate their superior efficiency in the separation of complex mixtures of peptides with molecular weights in the range of 800 to 3500 gmol-1. Furthermore, the thermodynamics and kinetics of phase separation leading to the pore formation in the membranes were investigated. The rheology of the solutions and the morphology of the prepared membranes were examed and compared to those of polyethersulfone in organic solvents currently used for membrane manufacture.

Membrane manufacture for peptide separations

KAUST Repository

Kim, Dooli

2016-06-07

Nanostructured polymeric membranes are key tools in biomedical applications such as hemodialysis, protein separations, in the food industry, and drinking water supply from seawater. Despite of the success in different separation processes, membrane manufacture itself is at risk, since the most used solvents are about to be banned in many countries due to environmental and health issues. We propose for the first time the preparation of polyethersulfone membranes based on dissolution in the ionic liquid 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM]DEP). We obtained a series of membranes tailored for separation of solutes with molecular weight of 30, 5, 1.3, and 1.25 kg mol-1 with respective water permeances of 140, 65, 30 and 20 Lm-2h-1bar-1. We demonstrate their superior efficiency in the separation of complex mixtures of peptides with molecular weights in the range of 800 to 3500 gmol-1. Furthermore, the thermodynamics and kinetics of phase separation leading to the pore formation in the membranes were investigated. The rheology of the solutions and the morphology of the prepared membranes were examed and compared to those of polyethersulfone in organic solvents currently used for membrane manufacture.

Design and characterization of low-cost fabric-based flat pneumatic actuators for soft assistive glove application.

Science.gov (United States)

Yap, Hong Kai; Sebastian, Frederick; Wiedeman, Christopher; Yeow, Chen-Hua

2017-07-01

We present the design of low-cost fabric-based Hat pneumatic actuators for soft assistive glove application. The soft assistive glove is designed to assist hand impaired patients in performing activities of daily living and rehabilitation. The actuators consist of flexible materials such as fabric and latex bladder. Using zero volume actuation concept, the 2D configuration of the actuators simplifies the manufacturing process and allows the actuators to be more compact. The actuators achieve bi-directional flexion and extension motions. Compared to previously developed inflatable soft actuators, the actuators generate sufficient force and torque to assist in both finger flexion and extension at lower air pressure. Preliminary evaluation results show that the glove is able to provide both active finger flexion and extension assistance for activities of daily living and rehabilitative training.

Drinking Level, Drinking Pattern, and Twenty-Year Total Mortality Among Late-Life Drinkers.

Science.gov (United States)

Holahan, Charles J; Schutte, Kathleen K; Brennan, Penny L; Holahan, Carole K; Moos, Rudolf H

2015-07-01

Research on moderate drinking has focused on the average level of drinking. Recently, however, investigators have begun to consider the role of the pattern of drinking, particularly heavy episodic drinking, in mortality. The present study examined the combined roles of average drinking level (moderate vs. high) and drinking pattern (regular vs. heavy episodic) in 20-year total mortality among late-life drinkers. The sample comprised 1,121 adults ages 55-65 years. Alcohol consumption was assessed at baseline, and total mortality was indexed across 20 years. We used multiple logistic regression analyses controlling for a broad set of sociodemographic, behavioral, and health status covariates. Among individuals whose high level of drinking placed them at risk, a heavy episodic drinking pattern did not increase mortality odds compared with a regular drinking pattern. Conversely, among individuals who engage in a moderate level of drinking, prior findings showed that a heavy episodic drinking pattern did increase mortality risk compared with a regular drinking pattern. Correspondingly, a high compared with a moderate drinking level increased mortality risk among individuals maintaining a regular drinking pattern, but not among individuals engaging in a heavy episodic drinking pattern, whose pattern of consumption had already placed them at risk. Findings highlight that low-risk drinking requires that older adults drink low to moderate average levels of alcohol and avoid heavy episodic drinking. Heavy episodic drinking is frequent among late-middle-aged and older adults and needs to be addressed along with average consumption in understanding the health risks of late-life drinkers.

Lymphocyte DNA damage in elevator manufacturing workers in Guangzhou, China.

Science.gov (United States)

Lam, Tai Hing; Zhu, Chang Qi; Jiang, Chao Qiang

2002-03-25

To study the effect of smoking, passive smoking, alcohol drinking, and occupational exposure to low level of benzene on DNA strand breaks in elevator manufacturing workers in Guangzhou, China. Three hundred and fifty-nine workers (252 men and 107 women) of a modern elevator manufacturing factory, 205 were from production departments and 154 from managerial department. Information on the workers' health conditions, smoking, passive smoking, alcohol consumption and occupational exposure history was collected by personal interview. Lymphocyte DNA damage was measured by the Comet assay. None of the women smoked and 20.6% of the men were daily smokers. In non-smokers, the prevalence of passive smoking at work was 25% for men and 11.2% for women, and at home, 37.8 and 48.6%, respectively. Smoking significantly increased tail moment (P<0.001). Daily smokers had the largest tail moment (geometric mean, 95% CI) (0.93 microm (0.81-0.94)), followed by occasional smokers (0.76 microm (0.59-0.95)), ex-smokers (0.70 microm (0.58-0.85)), and never smokers (0.56 microm (0.53-0.60)). Tail moment increased significantly with daily tobacco consumption (cigarettes per day) (r=0.26, P<0.001) after adjusting for age, gender, occupational exposure, passive smoking, and drinking. Analysis of covariance (ANCOVA) showed that smoking (P<0.001), passive smoking at home (P=0.026), occupational exposure (P<0.001), male gender (P<0.001), and age (P=0.001) had independent effects on tail moment, whereas passive smoking at work and alcohol drinking had no significant effect. Smoking, passive smoking at home, male gender, age and occupational exposure independently increased lymphocyte DNA strand breaks. The presence of excess DNA damage under low level of occupational exposure to benzene or other solvents suggest that the current allowance concentrations may not be safe to prevent genotoxicity.

Soft, embodied, situated & connected: enriching interactions with soft wearbles

NARCIS (Netherlands)

Tomico Plasencia, O.; Wilde, D.

2016-01-01

Soft wearables include clothing and textile-based accessories that incorporate smart textiles and soft electronic interfaces to enable responsive and interactive experiences. When designed well, soft wearables leverage the cultural, sociological and material qualities of textiles, fashion and dress;

Drinking or Not Drinking in Pregnancy

DEFF Research Database (Denmark)

Niclasen, Janni

2014-01-01

Studies investigating associations between prenatal exposure to low-moderate doses of alcohol and mental health development in childhood are inconsistent. The aim of the present study was to compare women who drink and who do not drink alcohol in pregnancy on a number of potential confounding...

A survey of the prevalence of fatigue, its precursors and individual coping mechanisms among U.S. manufacturing workers.

Science.gov (United States)

Lu, Lin; Megahed, Fadel M; Sesek, Richard F; Cavuoto, Lora A

2017-11-01

Advanced manufacturing has resulted in significant changes on the shop-floor, influencing work demands and the working environment. The corresponding safety-related effects, including fatigue, have not been captured on an industry-wide scale. This paper presents results of a survey of U.S. manufacturing workers for the: prevalence of fatigue, its root causes and significant factors, and adopted individual fatigue coping methods. The responses from 451 manufacturing employees were analyzed using descriptive data analysis, bivariate analysis and Market Basket Analysis. 57.9% of respondents indicated that they were somewhat fatigued during the past week. They reported the ankles/feet, lower back and eyes were frequently affected body parts and a lack of sleep, work stress and shift schedule were top selected root causes for fatigue. In order to respond to fatigue when it is present, respondents reported coping by drinking caffeinated drinks, stretching/doing exercises and talking with coworkers. Frequent combinations of fatigue causes and individual coping methods were identified. These results may inform the design of fatigue monitoring and mitigation strategies and future research related to fatigue development. Copyright © 2017 Elsevier Ltd. All rights reserved.

Knowledge, Attitude, Frequency and Level of Consumption Regarding Non-alcoholic Carbonated Soft Drinks among Students from Two High Schools in Hanoi, Vietnam in 2015

Directory of Open Access Journals (Sweden)

Nguyen Thanh Ha

2017-02-01

Full Text Available Objective: This article aims to describe the knowledge, attitude, frequency and level of consumption regarding non-alcoholic carbonated soft drinks (NCSD among students from two high schools in Hanoi. Materials and Methods: A cross-sectional survey including a semi-quantitative food frequency were conducted with 620 students from two high schools, one in the urban area and the other in the rural area of Hanoi city. Results: Data on knowledge of health risk associated with the consumption of NCSD showed neagtive results (only 11.9% of the students were able to identify all the contents of NCSD correctly, and 2.7% knew all eight health risks due to consumption of NCSD. Besides, 31.4% of all students did not have the intention to quit NCSD despite being aware of health risks associated with the consumption of NCSD. Students who reported consuming NCSD within one month prior to the study constituted 83.1%, and those who consumed NCSD 1–2 times/week accounted for the highest proportion, being 21.3%. On average, each student consumed 2,094 ml NCSD within one month prior to the study. Suburban students and male students consumed more than urban and female ones, respectively (p < 0.01. Recommendations: Students should be equipped with information about NCSD related health risks and encouraged to consume less NCSD.

Young adolescents' perceptions, patterns, and contexts of energy drink use. A focus group study.

Science.gov (United States)

Costa, Beth M; Hayley, Alexa; Miller, Peter

2014-09-01

Caffeinated energy drinks (EDs) are purported to increase energy and improve performance, but have been associated with adverse health effects and death. EDs are popular among adolescents and young adults, yet little is known about their use among young adolescents. This study explored perceptions, patterns, and contexts of ED use in six focus groups with 40 adolescents aged 12-15 years from two regional Australian schools. A thematic analysis of the data was used to investigate knowledge about ED brands and content, ED use, reasons for ED use, physiological effects, and influences on ED use. Participants were familiar with EDs and most had used them at least once but had limited knowledge of ED ingredients, and some had difficulty differentiating them from soft and sports drinks. EDs were used as an alternative to other drinks, to provide energy, and in social contexts, and their use was associated with short-term physiological symptoms. Parents and advertising influenced participants' perceptions and use of EDs. These findings suggest young adolescents use EDs without knowing what they are drinking and how they are contributing to their personal risk of harm. The advertising, appeal, and use of EDs by adolescents appear to share similarities with alcohol and tobacco. Further research is needed to replicate and extend the current findings, informed by the lessons learned in alcohol research. Copyright © 2014 Elsevier Ltd. All rights reserved.

INFLUENCE OF SOFT MEAT PRODUCTS STORAGE ON THEIR MICROBIOLOGICAL SAFETY

OpenAIRE

Jana Kopčeková; Kristína Kulichová; Lucia Zeleňáková

2010-01-01

The aim of the topic was to analyze the microbiological quality of soft meat products (ham sausage) in relation to the retention period. We focused on the determination of total count of microorganisms, Enterobacteriaceae and coliforms. The results shown that the strongest growth of microorganisms was recorded at the 21st storage day of ham at 2 to 6 °C. It is essential to keep the cold chain and to comply with the requirements set by the manufacturer.  doi:10.5219/20

Soft leptogenesis

International Nuclear Information System (INIS)

D'Ambrosio, Giancarlo; Giudice, Gian F.; Raidal, Martti

2003-01-01

We study 'soft leptogenesis', a new mechanism of leptogenesis which does not require flavour mixing among the right-handed neutrinos. Supersymmetry soft-breaking terms give a small mass splitting between the CP-even and CP-odd right-handed sneutrino states of a single generation and provide a CP-violating phase sufficient to generate a lepton asymmetry. The mechanism is successful if the lepton-violating soft bilinear coupling is unconventionally (but not unnaturally) small. The values of the right-handed neutrino masses predicted by soft leptogenesis can be low enough to evade the cosmological gravitino problem

Effect of coffe and a cola-based soft drink on the color stability of bleached bovine incisors considering the time elapsed after bleaching

Directory of Open Access Journals (Sweden)

Rodrigo PIROLO

2014-12-01

Full Text Available There is no consensus about the waiting time necessary for the patient to start consuming beverages containing colorants again after bleaching. Objective: To evaluate the influence of beverages with coloring agents on bleached bovine incisors considering the time elapsed after bleaching. Materials and methods: Sixty bovine incisors were bleached with 35% hydrogen peroxide for in-office use (Whiteness HP Max and divided into 10 groups. The color was evaluated with a spectrophotometer (Spectro Shade MICRO before and after bleaching, employing the CIE-Lab system. After bleaching, the teeth were exposed for 5 min to coffee or cola-based soft drink (CBSD at different periods after bleaching: 10 min, 1 h, 24 h, 48 h, and 72 h. Color (∆E and lightness (∆L variations were obtained from the CIE-Lab coordinates. Data were subjected to two-way ANOVA and Tukey HSD tests (p<0.05. Results: Significant differences were observed between groups for both the ∆L and ∆E values (p<0.001. All specimens presented a decrease in brightness (negative ∆L. The highest ∆E values were observed for teeth stained with a CBSD at 10 min and 1 h (4.12 and 4.16, respectively. Teeth pigmented with coffee presented ∆E values below 3.3 units for all evaluation times. Conclusion: The exposure to coffee after bleaching causes less color changes than the exposure to a CBSD regardless of the time after bleaching.

Beneficial Effect of Moderate Exercise in Kidney of Rat after Chronic Consumption of Cola Drinks.

Directory of Open Access Journals (Sweden)

Gabriel Cao

Full Text Available The purpose of this study was to investigate the effect of moderate intensity exercise on kidney in an animal model of high consumption of cola soft drinks.Forty-eight Wistar Kyoto rats (age: 16 weeks; weight: 350-400 g were assigned to the following groups: WR (water runners drank water and submitted to aerobic exercise; CR (cola runners drank cola and submitted to aerobic exercise; WS (water sedentary and CS (cola sedentary, not exercised groups. The aerobic exercise was performed for 5 days per week throughout the study (24 weeks and the exercise intensity was gradually increased during the first 8 weeks until it reached 20 meters / minute for 30 minutes. Body weight, lipid profile, glycemia, plasma creatinine levels, atherogenic index of plasma (AIP and systolic blood pressure (SBP were determined. After 6 months all rats were sacrificed. A kidney histopathological score was obtained using a semiquantitative scale. Glomerular size and glomerulosclerosis were estimated by point-counting. The oxidative stress and pro-inflammatory status were explored by immunohistochemistry. A one way analysis of variance (ANOVA with Tukey-Kramer post-hoc test or the Kruskal-Wallis test with Dunn's post-hoc test was used for statistics. A value of p < 0.05 was considered significant.At 6 months, an increased consumption of cola soft drink was shown in CS and CR compared with water consumers (p<0.0001. Chronic cola consumption was associated with increased plasma triglycerides, AIP, heart rate, histopathological score, glomerulosclerosis, oxidative stress and pro-inflammatory status. On the other hand, moderate exercise prevented these findings. No difference was observed in the body weight, SBP, glycemia, cholesterol and plasma creatinine levels across experimental groups.This study warns about the consequences of chronic consumption of cola drinks on lipid metabolism, especially regarding renal health. Additionally, these findings emphasize the protective

Utilization of portable effluent wastewater in brick manufacturing

International Nuclear Information System (INIS)

EI-Mahllawy, M.S.; El-Sokkary, T.M.

2005-01-01

Portable wastewater is produced from sedimentation and filtration tanks in portable water treatment plants. Usually, this useless wastewater is drained into River Nile Canal and not to the sewer system causing a potential pollution. Wastewater has been taken from Portable Treatment Plant located at Qalubia Province, Delta, Egypt. Evaluation of raw materials was carried out by using X-ray diffraction (XRD), X-ray fluorescence (XRF), thermal analyses (DTA and TGA) as well as plasticity and drying sensitivity coefficient (DSC) measurements. Technological properties of fired bricks were investigated according to Egyptian and American Specifications. The obtained experimental results encourage substitution of the drained portable wastewater for the tap water in bricks manufacturing. Thus, utilization of the studied portable effluent wastewater in such industry is possible and fulfills the double target of saving drinking water used in clay bricks manufacturing, rather than its environmental pollution prevention. Keywords: Portable wastewater, tap water, clay building bricks, physicomechanical properties

Energy Drinks and Binge Drinking Predict College Students' Sleep Quantity, Quality, and Tiredness.

Science.gov (United States)

Patrick, Megan E; Griffin, Jamie; Huntley, Edward D; Maggs, Jennifer L

2018-01-01

This study examines whether energy drink use and binge drinking predict sleep quantity, sleep quality, and next-day tiredness among college students. Web-based daily data on substance use and sleep were collected across four semesters in 2009 and 2010 from 667 individuals for up to 56 days each, yielding information on 25,616 person-days. Controlling for average levels of energy drink use and binge drinking (i.e., 4+ drinks for women, 5+ drinks for men), on days when students consumed energy drinks, they reported lower sleep quantity and quality that night, and greater next-day tiredness, compared to days they did not use energy drinks. Similarly, on days when students binge drank, they reported lower sleep quantity and quality that night, and greater next-day tiredness, compared to days they did not binge drink. There was no significant interaction effect between binge drinking and energy drink use on the outcomes.

Soft Robotics.

Science.gov (United States)

Whitesides, George M

2018-04-09

This description of "soft robotics" is not intended to be a conventional review, in the sense of a comprehensive technical summary of a developing field. Rather, its objective is to describe soft robotics as a new field-one that offers opportunities to chemists and materials scientists who like to make "things" and to work with macroscopic objects that move and exert force. It will give one (personal) view of what soft actuators and robots are, and how this class of soft devices fits into the more highly developed field of conventional "hard" robotics. It will also suggest how and why soft robotics is more than simply a minor technical "tweak" on hard robotics and propose a unique role for chemistry, and materials science, in this field. Soft robotics is, at its core, intellectually and technologically different from hard robotics, both because it has different objectives and uses and because it relies on the properties of materials to assume many of the roles played by sensors, actuators, and controllers in hard robotics. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.